Merge commit 'v2.6.27-rc8' into x86/setup

4803 files changed, 403655 insertions, 48964 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index ad89a33d8c6..364c6dadde0 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,18 +27,65 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config HAVE_EFFICIENT_UNALIGNED_ACCESS
+	def_bool n
+	help
+	  Some architectures are unable to perform unaligned accesses
+	  without the use of get_unaligned/put_unaligned. Others are
+	  unable to perform such accesses efficiently (e.g. trap on
+	  unaligned access and require fixing it up in the exception
+	  handler.)
+
+	  This symbol should be selected by an architecture if it can
+	  perform unaligned accesses efficiently to allow different
+	  code paths to be selected for these cases. Some network
+	  drivers, for example, could opt to not fix up alignment
+	  problems with received packets if doing so would not help
+	  much.
+
+	  See Documentation/unaligned-memory-access.txt for more
+	  information on the topic of unaligned memory accesses.
+
 config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
 
+config HAVE_IOREMAP_PROT
+	def_bool n
+
 config HAVE_KPROBES
 	def_bool n
 
 config HAVE_KRETPROBES
 	def_bool n
 
+#
+# An arch should select this if it provides all these things:
+#
+#	task_pt_regs()		in asm/processor.h or asm/ptrace.h
+#	arch_has_single_step()	if there is hardware single-step support
+#	arch_has_block_step()	if there is hardware block-step support
+#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
+#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
+#	asm/syscall.h		supplying asm-generic/syscall.h interface
+#	linux/regset.h		user_regset interfaces
+#	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
+#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
+#	signal delivery		calls tracehook_signal_handler()
+#
+config HAVE_ARCH_TRACEHOOK
+	def_bool n
+
 config HAVE_DMA_ATTRS
 	def_bool n
 
 config USE_GENERIC_SMP_HELPERS
 	def_bool n
+
+config HAVE_CLK
+	def_bool n
+	help
+	  The <linux/clk.h> calls support software clock gating and
+	  thus are a key power management tool on many systems.
+
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index dbe8c280fea..1bec55d63ef 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -333,11 +333,6 @@ config PCI_SYSCALL
 config IOMMU_HELPER
 	def_bool PCI
 
-config ALPHA_CORE_AGP
-	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
-	default y
-
 config ALPHA_NONAME
 	bool
 	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index c00646b25f6..3047a1b3a51 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -78,8 +78,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static char *input_data;
 static int  input_data_size;
@@ -88,51 +86,18 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
 static void gzip_mark(void **);
 static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
 #define HEAP_SIZE 0x3000
 
 #include "../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
  * and at least one byte is really needed.
@@ -193,7 +158,7 @@ decompress_kernel(void *output_start,
 
 	/* FIXME FIXME FIXME */
 	free_mem_ptr		= (ulg)output_start + ksize;
-	free_mem_ptr_end	= (ulg)output_start + ksize + 0x200000;
+	free_mem_end_ptr	= (ulg)output_start + ksize + 0x200000;
 	/* FIXME FIXME FIXME */
 
 	/* put in temp area to reduce initial footprint */
diff --git a/arch/alpha/include/asm/8253pit.h b/arch/alpha/include/asm/8253pit.h
new file mode 100644
index 00000000000..fef5c1450e4
--- /dev/null
+++ b/arch/alpha/include/asm/8253pit.h
@@ -0,0 +1,10 @@
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#ifndef _8253PIT_H
+#define _8253PIT_H
+
+#define PIT_TICK_RATE 	1193180UL
+
+#endif
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
new file mode 100644
index 00000000000..b7c8f188b31
--- /dev/null
+++ b/arch/alpha/include/asm/Kbuild
@@ -0,0 +1,11 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += gentrap.h
+header-y += regdef.h
+header-y += pal.h
+header-y += reg.h
+
+unifdef-y += console.h
+unifdef-y += fpu.h
+unifdef-y += sysinfo.h
+unifdef-y += compiler.h
diff --git a/arch/alpha/include/asm/a.out-core.h b/arch/alpha/include/asm/a.out-core.h
new file mode 100644
index 00000000000..9e33e92e524
--- /dev/null
+++ b/arch/alpha/include/asm/a.out-core.h
@@ -0,0 +1,80 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+
+/*
+ * Fill in the user structure for an ECOFF core dump.
+ */
+static inline void aout_dump_thread(struct pt_regs *pt, struct user *dump)
+{
+	/* switch stack follows right below pt_regs: */
+	struct switch_stack * sw = ((struct switch_stack *) pt) - 1;
+
+	dump->magic = CMAGIC;
+	dump->start_code  = current->mm->start_code;
+	dump->start_data  = current->mm->start_data;
+	dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
+	dump->u_tsize = ((current->mm->end_code - dump->start_code)
+			 >> PAGE_SHIFT);
+	dump->u_dsize = ((current->mm->brk + PAGE_SIZE-1 - dump->start_data)
+			 >> PAGE_SHIFT);
+	dump->u_ssize = (current->mm->start_stack - dump->start_stack
+			 + PAGE_SIZE-1) >> PAGE_SHIFT;
+
+	/*
+	 * We store the registers in an order/format that is
+	 * compatible with DEC Unix/OSF/1 as this makes life easier
+	 * for gdb.
+	 */
+	dump->regs[EF_V0]  = pt->r0;
+	dump->regs[EF_T0]  = pt->r1;
+	dump->regs[EF_T1]  = pt->r2;
+	dump->regs[EF_T2]  = pt->r3;
+	dump->regs[EF_T3]  = pt->r4;
+	dump->regs[EF_T4]  = pt->r5;
+	dump->regs[EF_T5]  = pt->r6;
+	dump->regs[EF_T6]  = pt->r7;
+	dump->regs[EF_T7]  = pt->r8;
+	dump->regs[EF_S0]  = sw->r9;
+	dump->regs[EF_S1]  = sw->r10;
+	dump->regs[EF_S2]  = sw->r11;
+	dump->regs[EF_S3]  = sw->r12;
+	dump->regs[EF_S4]  = sw->r13;
+	dump->regs[EF_S5]  = sw->r14;
+	dump->regs[EF_S6]  = sw->r15;
+	dump->regs[EF_A3]  = pt->r19;
+	dump->regs[EF_A4]  = pt->r20;
+	dump->regs[EF_A5]  = pt->r21;
+	dump->regs[EF_T8]  = pt->r22;
+	dump->regs[EF_T9]  = pt->r23;
+	dump->regs[EF_T10] = pt->r24;
+	dump->regs[EF_T11] = pt->r25;
+	dump->regs[EF_RA]  = pt->r26;
+	dump->regs[EF_T12] = pt->r27;
+	dump->regs[EF_AT]  = pt->r28;
+	dump->regs[EF_SP]  = rdusp();
+	dump->regs[EF_PS]  = pt->ps;
+	dump->regs[EF_PC]  = pt->pc;
+	dump->regs[EF_GP]  = pt->gp;
+	dump->regs[EF_A0]  = pt->r16;
+	dump->regs[EF_A1]  = pt->r17;
+	dump->regs[EF_A2]  = pt->r18;
+	memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h
new file mode 100644
index 00000000000..02ce8473870
--- /dev/null
+++ b/arch/alpha/include/asm/a.out.h
@@ -0,0 +1,102 @@
+#ifndef __ALPHA_A_OUT_H__
+#define __ALPHA_A_OUT_H__
+
+#include <linux/types.h>
+
+/*
+ * OSF/1 ECOFF header structs.  ECOFF files consist of:
+ * 	- a file header (struct filehdr),
+ *	- an a.out header (struct aouthdr),
+ *	- one or more section headers (struct scnhdr). 
+ *	  The filhdr's "f_nscns" field contains the
+ *	  number of section headers.
+ */
+
+struct filehdr
+{
+	/* OSF/1 "file" header */
+	__u16 f_magic, f_nscns;
+	__u32 f_timdat;
+	__u64 f_symptr;
+	__u32 f_nsyms;
+	__u16 f_opthdr, f_flags;
+};
+
+struct aouthdr
+{
+	__u64 info;		/* after that it looks quite normal.. */
+	__u64 tsize;
+	__u64 dsize;
+	__u64 bsize;
+	__u64 entry;
+	__u64 text_start;	/* with a few additions that actually make sense */
+	__u64 data_start;
+	__u64 bss_start;
+	__u32 gprmask, fprmask;	/* bitmask of general & floating point regs used in binary */
+	__u64 gpvalue;
+};
+
+struct scnhdr
+{
+	char	s_name[8];
+	__u64	s_paddr;
+	__u64	s_vaddr;
+	__u64	s_size;
+	__u64	s_scnptr;
+	__u64	s_relptr;
+	__u64	s_lnnoptr;
+	__u16	s_nreloc;
+	__u16	s_nlnno;
+	__u32	s_flags;
+};
+
+struct exec
+{
+	/* OSF/1 "file" header */
+	struct filehdr		fh;
+	struct aouthdr		ah;
+};
+
+/*
+ * Define's so that the kernel exec code can access the a.out header
+ * fields...
+ */
+#define	a_info		ah.info
+#define	a_text		ah.tsize
+#define a_data		ah.dsize
+#define a_bss		ah.bsize
+#define a_entry		ah.entry
+#define a_textstart	ah.text_start
+#define	a_datastart	ah.data_start
+#define	a_bssstart	ah.bss_start
+#define	a_gprmask	ah.gprmask
+#define a_fprmask	ah.fprmask
+#define a_gpvalue	ah.gpvalue
+
+#define N_TXTADDR(x) ((x).a_textstart)
+#define N_DATADDR(x) ((x).a_datastart)
+#define N_BSSADDR(x) ((x).a_bssstart)
+#define N_DRSIZE(x) 0
+#define N_TRSIZE(x) 0
+#define N_SYMSIZE(x) 0
+
+#define AOUTHSZ		sizeof(struct aouthdr)
+#define SCNHSZ		sizeof(struct scnhdr)
+#define SCNROUND	16
+
+#define N_TXTOFF(x) \
+  ((long) N_MAGIC(x) == ZMAGIC ? 0 : \
+   (sizeof(struct exec) + (x).fh.f_nscns*SCNHSZ + SCNROUND - 1) & ~(SCNROUND - 1))
+
+#ifdef __KERNEL__
+
+/* Assume that start addresses below 4G belong to a TASO application.
+   Unfortunately, there is no proper bit in the exec header to check.
+   Worse, we have to notice the start address before swapping to use
+   /sbin/loader, which of course is _not_ a TASO application.  */
+#define SET_AOUT_PERSONALITY(BFPM, EX) \
+	set_personality (((BFPM->sh_bang || EX.ah.entry < 0x100000000L \
+			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
+
+#endif /* __KERNEL__ */
+#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
new file mode 100644
index 00000000000..26c17913529
--- /dev/null
+++ b/arch/alpha/include/asm/agp.h
@@ -0,0 +1,22 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+#include <asm/io.h>
+
+/* dummy for now */
+
+#define map_page_into_agp(page) 
+#define unmap_page_from_agp(page) 
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif
diff --git a/arch/alpha/include/asm/agp_backend.h b/arch/alpha/include/asm/agp_backend.h
new file mode 100644
index 00000000000..55dd44a2cea
--- /dev/null
+++ b/arch/alpha/include/asm/agp_backend.h
@@ -0,0 +1,42 @@
+#ifndef _ALPHA_AGP_BACKEND_H
+#define _ALPHA_AGP_BACKEND_H 1
+
+typedef	union _alpha_agp_mode {
+	struct {
+		u32 rate : 3;
+		u32 reserved0 : 1;
+		u32 fw : 1;
+		u32 fourgb : 1;
+		u32 reserved1 : 2;
+		u32 enable : 1;
+		u32 sba : 1;
+		u32 reserved2 : 14;
+		u32 rq : 8;
+	} bits;
+	u32 lw;
+} alpha_agp_mode;
+
+typedef struct _alpha_agp_info {
+	struct pci_controller *hose;
+	struct {
+		dma_addr_t bus_base;
+		unsigned long size;
+		void *sysdata;
+	} aperture;
+	alpha_agp_mode capability;
+	alpha_agp_mode mode;
+	void *private;
+	struct alpha_agp_ops *ops;
+} alpha_agp_info;
+
+struct alpha_agp_ops {
+	int (*setup)(alpha_agp_info *);
+	void (*cleanup)(alpha_agp_info *);
+	int (*configure)(alpha_agp_info *);
+	int (*bind)(alpha_agp_info *, off_t, struct agp_memory *);
+	int (*unbind)(alpha_agp_info *, off_t, struct agp_memory *);
+	unsigned long (*translate)(alpha_agp_info *, dma_addr_t);
+};
+
+
+#endif /* _ALPHA_AGP_BACKEND_H */
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
new file mode 100644
index 00000000000..ca88e54dec9
--- /dev/null
+++ b/arch/alpha/include/asm/atomic.h
@@ -0,0 +1,267 @@
+#ifndef _ALPHA_ATOMIC_H
+#define _ALPHA_ATOMIC_H
+
+#include <asm/barrier.h>
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc...
+ *
+ * But use these as seldom as possible since they are much slower
+ * than regular operations.
+ */
+
+
+/*
+ * Counter is volatile to make sure gcc doesn't try to be clever
+ * and move things around on us. We need to use _exactly_ the address
+ * the user gave us, not some alias that contains the same information.
+ */
+typedef struct { volatile int counter; } atomic_t;
+typedef struct { volatile long counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
+#define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
+
+#define atomic_read(v)		((v)->counter + 0)
+#define atomic64_read(v)	((v)->counter + 0)
+
+#define atomic_set(v,i)		((v)->counter = (i))
+#define atomic64_set(v,i)	((v)->counter = (i))
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%1\n"
+	"	addl %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter)
+	:"Ir" (i), "m" (v->counter));
+}
+
+static __inline__ void atomic64_add(long i, atomic64_t * v)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	addq %0,%2,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter)
+	:"Ir" (i), "m" (v->counter));
+}
+
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%1\n"
+	"	subl %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter)
+	:"Ir" (i), "m" (v->counter));
+}
+
+static __inline__ void atomic64_sub(long i, atomic64_t * v)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	subq %0,%2,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter)
+	:"Ir" (i), "m" (v->counter));
+}
+
+
+/*
+ * Same as above, but return the result value
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	long temp, result;
+	smp_mb();
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%1\n"
+	"	addl %0,%3,%2\n"
+	"	addl %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
+	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
+	return result;
+}
+
+static __inline__ long atomic64_add_return(long i, atomic64_t * v)
+{
+	long temp, result;
+	smp_mb();
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	addq %0,%3,%2\n"
+	"	addq %0,%3,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
+	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
+	return result;
+}
+
+static __inline__ long atomic_sub_return(int i, atomic_t * v)
+{
+	long temp, result;
+	smp_mb();
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%1\n"
+	"	subl %0,%3,%2\n"
+	"	subl %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
+	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
+	return result;
+}
+
+static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
+{
+	long temp, result;
+	smp_mb();
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	subq %0,%3,%2\n"
+	"	subq %0,%3,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (v->counter), "=&r" (result)
+	:"Ir" (i), "m" (v->counter) : "memory");
+	smp_mb();
+	return result;
+}
+
+#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic64_dec_return(v) atomic64_sub_return(1,(v))
+
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+#define atomic64_inc_return(v) atomic64_add_return(1,(v))
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0)
+
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+#define atomic64_inc_and_test(v) (atomic64_add_return(1, (v)) == 0)
+
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
+
+#define atomic_inc(v) atomic_add(1,(v))
+#define atomic64_inc(v) atomic64_add(1,(v))
+
+#define atomic_dec(v) atomic_sub(1,(v))
+#define atomic64_dec(v) atomic64_sub(1,(v))
+
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+#include <asm-generic/atomic.h>
+#endif /* _ALPHA_ATOMIC_H */
diff --git a/arch/alpha/include/asm/auxvec.h b/arch/alpha/include/asm/auxvec.h
new file mode 100644
index 00000000000..e96fe880e31
--- /dev/null
+++ b/arch/alpha/include/asm/auxvec.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_ALPHA_AUXVEC_H
+#define __ASM_ALPHA_AUXVEC_H
+
+/* Reserve these numbers for any future use of a VDSO.  */
+#if 0
+#define AT_SYSINFO		32
+#define AT_SYSINFO_EHDR		33
+#endif
+
+/* More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
+   value is -1, then the cache doesn't exist.  Otherwise:
+
+      bit 0-3:	  Cache set-associativity; 0 means fully associative.
+      bit 4-7:	  Log2 of cacheline size.
+      bit 8-31:	  Size of the entire cache >> 8.
+      bit 32-63:  Reserved.
+*/
+
+#define AT_L1I_CACHESHAPE	34
+#define AT_L1D_CACHESHAPE	35
+#define AT_L2_CACHESHAPE	36
+#define AT_L3_CACHESHAPE	37
+
+#endif /* __ASM_ALPHA_AUXVEC_H */
diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h
new file mode 100644
index 00000000000..ac78eba909b
--- /dev/null
+++ b/arch/alpha/include/asm/barrier.h
@@ -0,0 +1,33 @@
+#ifndef __BARRIER_H
+#define __BARRIER_H
+
+#include <asm/compiler.h>
+
+#define mb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define rmb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define wmb() \
+__asm__ __volatile__("wmb": : :"memory")
+
+#define read_barrier_depends() \
+__asm__ __volatile__("mb": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#endif
+
+#define set_mb(var, value) \
+do { var = value; mb(); } while (0)
+
+#endif		/* __BARRIER_H */
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
new file mode 100644
index 00000000000..15f3ae25c51
--- /dev/null
+++ b/arch/alpha/include/asm/bitops.h
@@ -0,0 +1,466 @@
+#ifndef _ALPHA_BITOPS_H
+#define _ALPHA_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm/compiler.h>
+#include <asm/barrier.h>
+
+/*
+ * Copyright 1994, Linus Torvalds.
+ */
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ *
+ * bit 0 is the LSB of addr; bit 64 is the LSB of (addr+1).
+ */
+
+static inline void
+set_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%3\n"
+	"	bis %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m)
+	:"Ir" (1UL << (nr & 31)), "m" (*m));
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static inline void
+__set_bit(unsigned long nr, volatile void * addr)
+{
+	int *m = ((int *) addr) + (nr >> 5);
+
+	*m |= 1 << (nr & 31);
+}
+
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+
+static inline void
+clear_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%3\n"
+	"	bic %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m)
+	:"Ir" (1UL << (nr & 31)), "m" (*m));
+}
+
+static inline void
+clear_bit_unlock(unsigned long nr, volatile void * addr)
+{
+	smp_mb();
+	clear_bit(nr, addr);
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ void
+__clear_bit(unsigned long nr, volatile void * addr)
+{
+	int *m = ((int *) addr) + (nr >> 5);
+
+	*m &= ~(1 << (nr & 31));
+}
+
+static inline void
+__clear_bit_unlock(unsigned long nr, volatile void * addr)
+{
+	smp_mb();
+	__clear_bit(nr, addr);
+}
+
+static inline void
+change_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%3\n"
+	"	xor %0,%2,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m)
+	:"Ir" (1UL << (nr & 31)), "m" (*m));
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ void
+__change_bit(unsigned long nr, volatile void * addr)
+{
+	int *m = ((int *) addr) + (nr >> 5);
+
+	*m ^= 1 << (nr & 31);
+}
+
+static inline int
+test_and_set_bit(unsigned long nr, volatile void *addr)
+{
+	unsigned long oldbit;
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"1:	ldl_l %0,%4\n"
+	"	and %0,%3,%2\n"
+	"	bne %2,2f\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,3f\n"
+	"2:\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
+	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
+
+	return oldbit != 0;
+}
+
+static inline int
+test_and_set_bit_lock(unsigned long nr, volatile void *addr)
+{
+	unsigned long oldbit;
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	and %0,%3,%2\n"
+	"	bne %2,2f\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,3f\n"
+	"2:\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
+	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
+
+	return oldbit != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static inline int
+__test_and_set_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	int *m = ((int *) addr) + (nr >> 5);
+	int old = *m;
+
+	*m = old | mask;
+	return (old & mask) != 0;
+}
+
+static inline int
+test_and_clear_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long oldbit;
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"1:	ldl_l %0,%4\n"
+	"	and %0,%3,%2\n"
+	"	beq %2,2f\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,3f\n"
+	"2:\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
+	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
+
+	return oldbit != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static inline int
+__test_and_clear_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	int *m = ((int *) addr) + (nr >> 5);
+	int old = *m;
+
+	*m = old & ~mask;
+	return (old & mask) != 0;
+}
+
+static inline int
+test_and_change_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long oldbit;
+	unsigned long temp;
+	int *m = ((int *) addr) + (nr >> 5);
+
+	__asm__ __volatile__(
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"1:	ldl_l %0,%4\n"
+	"	and %0,%3,%2\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*m), "=&r" (oldbit)
+	:"Ir" (1UL << (nr & 31)), "m" (*m) : "memory");
+
+	return oldbit != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ int
+__test_and_change_bit(unsigned long nr, volatile void * addr)
+{
+	unsigned long mask = 1 << (nr & 0x1f);
+	int *m = ((int *) addr) + (nr >> 5);
+	int old = *m;
+
+	*m = old ^ mask;
+	return (old & mask) != 0;
+}
+
+static inline int
+test_bit(int nr, const volatile void * addr)
+{
+	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ *
+ * Do a binary search on the bits.  Due to the nature of large
+ * constants on the alpha, it is worthwhile to split the search.
+ */
+static inline unsigned long ffz_b(unsigned long x)
+{
+	unsigned long sum, x1, x2, x4;
+
+	x = ~x & -~x;		/* set first 0 bit, clear others */
+	x1 = x & 0xAA;
+	x2 = x & 0xCC;
+	x4 = x & 0xF0;
+	sum = x2 ? 2 : 0;
+	sum += (x4 != 0) * 4;
+	sum += (x1 != 0);
+
+	return sum;
+}
+
+static inline unsigned long ffz(unsigned long word)
+{
+#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
+	/* Whee.  EV67 can calculate it directly.  */
+	return __kernel_cttz(~word);
+#else
+	unsigned long bits, qofs, bofs;
+
+	bits = __kernel_cmpbge(word, ~0UL);
+	qofs = ffz_b(bits);
+	bits = __kernel_extbl(word, qofs);
+	bofs = ffz_b(bits);
+
+	return qofs*8 + bofs;
+#endif
+}
+
+/*
+ * __ffs = Find First set bit in word.  Undefined if no set bit exists.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
+	/* Whee.  EV67 can calculate it directly.  */
+	return __kernel_cttz(word);
+#else
+	unsigned long bits, qofs, bofs;
+
+	bits = __kernel_cmpbge(0, word);
+	qofs = ffz_b(bits);
+	bits = __kernel_extbl(word, qofs);
+	bofs = ffz_b(~bits);
+
+	return qofs*8 + bofs;
+#endif
+}
+
+#ifdef __KERNEL__
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above __ffs.
+ */
+
+static inline int ffs(int word)
+{
+	int result = __ffs(word) + 1;
+	return word ? result : 0;
+}
+
+/*
+ * fls: find last bit set.
+ */
+#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
+static inline int fls64(unsigned long word)
+{
+	return 64 - __kernel_ctlz(word);
+}
+#else
+extern const unsigned char __flsm1_tab[256];
+
+static inline int fls64(unsigned long x)
+{
+	unsigned long t, a, r;
+
+	t = __kernel_cmpbge (x, 0x0101010101010101UL);
+	a = __flsm1_tab[t];
+	t = __kernel_extbl (x, a);
+	r = a*8 + __flsm1_tab[t] + (x != 0);
+
+	return r;
+}
+#endif
+
+static inline unsigned long __fls(unsigned long x)
+{
+	return fls64(x) - 1;
+}
+
+static inline int fls(int x)
+{
+	return fls64((unsigned int) x);
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
+/* Whee.  EV67 can calculate it directly.  */
+static inline unsigned long hweight64(unsigned long w)
+{
+	return __kernel_ctpop(w);
+}
+
+static inline unsigned int hweight32(unsigned int w)
+{
+	return hweight64(w);
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+	return hweight64(w & 0xffff);
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+	return hweight64(w & 0xff);
+}
+#else
+#include <asm-generic/bitops/hweight.h>
+#endif
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is set.
+ */
+static inline unsigned long
+sched_find_first_bit(unsigned long b[3])
+{
+	unsigned long b0 = b[0], b1 = b[1], b2 = b[2];
+	unsigned long ofs;
+
+	ofs = (b1 ? 64 : 128);
+	b1 = (b1 ? b1 : b2);
+	ofs = (b0 ? 0 : ofs);
+	b0 = (b0 ? b0 : b1);
+
+	return __ffs(b0) + ofs;
+}
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(l,n,a)   test_and_set_bit(n,a)
+#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a)
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ALPHA_BITOPS_H */
diff --git a/arch/alpha/include/asm/bug.h b/arch/alpha/include/asm/bug.h
new file mode 100644
index 00000000000..695a5ee4b5d
--- /dev/null
+++ b/arch/alpha/include/asm/bug.h
@@ -0,0 +1,28 @@
+#ifndef _ALPHA_BUG_H
+#define _ALPHA_BUG_H
+
+#include <linux/linkage.h>
+
+#ifdef CONFIG_BUG
+#include <asm/pal.h>
+
+/* ??? Would be nice to use .gprel32 here, but we can't be sure that the
+   function loaded the GP, so this could fail in modules.  */
+static inline void ATTRIB_NORET __BUG(const char *file, int line)
+{
+	__asm__ __volatile__(
+		"call_pal %0  # bugchk\n\t"
+		".long %1\n\t.8byte %2"
+		       : : "i" (PAL_bugchk), "i"(line), "i"(file));
+	for ( ; ; )
+		;
+}
+
+#define BUG() __BUG(__FILE__, __LINE__)
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/alpha/include/asm/bugs.h b/arch/alpha/include/asm/bugs.h
new file mode 100644
index 00000000000..78030d1c7e7
--- /dev/null
+++ b/arch/alpha/include/asm/bugs.h
@@ -0,0 +1,20 @@
+/*
+ *  include/asm-alpha/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+/*
+ * I don't know of any alpha bugs yet.. Nice chip
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/arch/alpha/include/asm/byteorder.h b/arch/alpha/include/asm/byteorder.h
new file mode 100644
index 00000000000..58e958fc7f1
--- /dev/null
+++ b/arch/alpha/include/asm/byteorder.h
@@ -0,0 +1,47 @@
+#ifndef _ALPHA_BYTEORDER_H
+#define _ALPHA_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+#include <asm/compiler.h>
+
+#ifdef __GNUC__
+
+static inline __attribute_const__ __u32 __arch__swab32(__u32 x)
+{
+	/*
+	 * Unfortunately, we can't use the 6 instruction sequence
+	 * on ev6 since the latency of the UNPKBW is 3, which is
+	 * pretty hard to hide.  Just in case a future implementation
+	 * has a lower latency, here's the sequence (also by Mike Burrows)
+	 *
+	 * UNPKBW a0, v0       v0: 00AA00BB00CC00DD
+	 * SLL v0, 24, a0      a0: BB00CC00DD000000
+	 * BIS v0, a0, a0      a0: BBAACCBBDDCC00DD
+	 * EXTWL a0, 6, v0     v0: 000000000000BBAA
+	 * ZAP a0, 0xf3, a0    a0: 00000000DDCC0000
+	 * ADDL a0, v0, v0     v0: ssssssssDDCCBBAA
+	 */
+
+	__u64 t0, t1, t2, t3;
+
+	t0 = __kernel_inslh(x, 7);	/* t0 : 0000000000AABBCC */
+	t1 = __kernel_inswl(x, 3);	/* t1 : 000000CCDD000000 */
+	t1 |= t0;			/* t1 : 000000CCDDAABBCC */
+	t2 = t1 >> 16;			/* t2 : 0000000000CCDDAA */
+	t0 = t1 & 0xFF00FF00;		/* t0 : 00000000DD00BB00 */
+	t3 = t2 & 0x00FF00FF;		/* t3 : 0000000000CC00AA */
+	t1 = t0 + t3;			/* t1 : ssssssssDDCCBBAA */
+
+	return t1;
+}
+
+#define __arch__swab32 __arch__swab32
+
+#endif /* __GNUC__ */
+
+#define __BYTEORDER_HAS_U64__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ALPHA_BYTEORDER_H */
diff --git a/arch/alpha/include/asm/cache.h b/arch/alpha/include/asm/cache.h
new file mode 100644
index 00000000000..f199e69a5d0
--- /dev/null
+++ b/arch/alpha/include/asm/cache.h
@@ -0,0 +1,23 @@
+/*
+ * include/asm-alpha/cache.h
+ */
+#ifndef __ARCH_ALPHA_CACHE_H
+#define __ARCH_ALPHA_CACHE_H
+
+
+/* Bytes per L1 (data) cache line. */
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EV6)
+# define L1_CACHE_BYTES     64
+# define L1_CACHE_SHIFT     6
+#else
+/* Both EV4 and EV5 are write-through, read-allocate,
+   direct-mapped, physical.
+*/
+# define L1_CACHE_BYTES     32
+# define L1_CACHE_SHIFT     5
+#endif
+
+#define L1_CACHE_ALIGN(x)  (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define SMP_CACHE_BYTES    L1_CACHE_BYTES
+
+#endif
diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
new file mode 100644
index 00000000000..b686cc7fc44
--- /dev/null
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -0,0 +1,74 @@
+#ifndef _ALPHA_CACHEFLUSH_H
+#define _ALPHA_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the Alpha. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+/* Note that the following two definitions are _highly_ dependent
+   on the contexts in which they are used in the kernel.  I personally
+   think it is criminal how loosely defined these macros are.  */
+
+/* We need to flush the kernel's icache after loading modules.  The
+   only other use of this macro is in load_aout_interp which is not
+   used on Alpha. 
+
+   Note that this definition should *not* be used for userspace
+   icache flushing.  While functional, it is _way_ overkill.  The
+   icache is tagged with ASNs and it suffices to allocate a new ASN
+   for the process.  */
+#ifndef CONFIG_SMP
+#define flush_icache_range(start, end)		imb()
+#else
+#define flush_icache_range(start, end)		smp_imb()
+extern void smp_imb(void);
+#endif
+
+/* We need to flush the userspace icache after setting breakpoints in
+   ptrace.
+
+   Instead of indiscriminately using imb, take advantage of the fact
+   that icache entries are tagged with the ASN and load a new mm context.  */
+/* ??? Ought to use this in arch/alpha/kernel/signal.c too.  */
+
+#ifndef CONFIG_SMP
+extern void __load_new_mm_context(struct mm_struct *);
+static inline void
+flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+			unsigned long addr, int len)
+{
+	if (vma->vm_flags & VM_EXEC) {
+		struct mm_struct *mm = vma->vm_mm;
+		if (current->active_mm == mm)
+			__load_new_mm_context(mm);
+		else
+			mm->context[smp_processor_id()] = 0;
+	}
+}
+#else
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+		struct page *page, unsigned long addr, int len);
+#endif
+
+/* This is used only in do_no_page and do_swap_page.  */
+#define flush_icache_page(vma, page) \
+  flush_icache_user_range((vma), (page), 0, 0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _ALPHA_CACHEFLUSH_H */
diff --git a/arch/alpha/include/asm/checksum.h b/arch/alpha/include/asm/checksum.h
new file mode 100644
index 00000000000..d3854bbf0a9
--- /dev/null
+++ b/arch/alpha/include/asm/checksum.h
@@ -0,0 +1,75 @@
+#ifndef _ALPHA_CHECKSUM_H
+#define _ALPHA_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					   unsigned short len,
+					   unsigned short proto,
+					   __wsum sum);
+
+__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+				unsigned short len, unsigned short proto,
+				__wsum sum);
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *errp);
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+/*
+ *	Fold a partial checksum without adding pseudo headers
+ */
+
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return (__force __sum16)~sum;
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+			       const struct in6_addr *daddr,
+			       __u32 len, unsigned short proto,
+			       __wsum sum);
+#endif
diff --git a/arch/alpha/include/asm/compiler.h b/arch/alpha/include/asm/compiler.h
new file mode 100644
index 00000000000..da6bb199839
--- /dev/null
+++ b/arch/alpha/include/asm/compiler.h
@@ -0,0 +1,130 @@
+#ifndef __ALPHA_COMPILER_H
+#define __ALPHA_COMPILER_H
+
+/* 
+ * Herein are macros we use when describing various patterns we want to GCC.
+ * In all cases we can get better schedules out of the compiler if we hide
+ * as little as possible inside inline assembly.  However, we want to be
+ * able to know what we'll get out before giving up inline assembly.  Thus
+ * these tests and macros.
+ */
+
+#if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3
+# define __kernel_insbl(val, shift)	__builtin_alpha_insbl(val, shift)
+# define __kernel_inswl(val, shift)	__builtin_alpha_inswl(val, shift)
+# define __kernel_insql(val, shift)	__builtin_alpha_insql(val, shift)
+# define __kernel_inslh(val, shift)	__builtin_alpha_inslh(val, shift)
+# define __kernel_extbl(val, shift)	__builtin_alpha_extbl(val, shift)
+# define __kernel_extwl(val, shift)	__builtin_alpha_extwl(val, shift)
+# define __kernel_cmpbge(a, b)		__builtin_alpha_cmpbge(a, b)
+#else
+# define __kernel_insbl(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("insbl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_inswl(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("inswl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_insql(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("insql %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_inslh(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("inslh %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_extbl(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("extbl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_extwl(val, shift)					\
+  ({ unsigned long __kir;						\
+     __asm__("extwl %2,%1,%0" : "=r"(__kir) : "rI"(shift), "r"(val));	\
+     __kir; })
+# define __kernel_cmpbge(a, b)						\
+  ({ unsigned long __kir;						\
+     __asm__("cmpbge %r2,%1,%0" : "=r"(__kir) : "rI"(b), "rJ"(a));	\
+     __kir; })
+#endif
+
+#ifdef __alpha_cix__
+# if __GNUC__ == 3 && __GNUC_MINOR__ >= 4 || __GNUC__ > 3
+#  define __kernel_cttz(x)		__builtin_ctzl(x)
+#  define __kernel_ctlz(x)		__builtin_clzl(x)
+#  define __kernel_ctpop(x)		__builtin_popcountl(x)
+# else
+#  define __kernel_cttz(x)						\
+   ({ unsigned long __kir;						\
+      __asm__("cttz %1,%0" : "=r"(__kir) : "r"(x));			\
+      __kir; })
+#  define __kernel_ctlz(x)						\
+   ({ unsigned long __kir;						\
+      __asm__("ctlz %1,%0" : "=r"(__kir) : "r"(x));			\
+      __kir; })
+#  define __kernel_ctpop(x)						\
+   ({ unsigned long __kir;						\
+      __asm__("ctpop %1,%0" : "=r"(__kir) : "r"(x));			\
+      __kir; })
+# endif
+#else
+# define __kernel_cttz(x)						\
+  ({ unsigned long __kir;						\
+     __asm__(".arch ev67; cttz %1,%0" : "=r"(__kir) : "r"(x));		\
+     __kir; })
+# define __kernel_ctlz(x)						\
+  ({ unsigned long __kir;						\
+     __asm__(".arch ev67; ctlz %1,%0" : "=r"(__kir) : "r"(x));		\
+     __kir; })
+# define __kernel_ctpop(x)						\
+  ({ unsigned long __kir;						\
+     __asm__(".arch ev67; ctpop %1,%0" : "=r"(__kir) : "r"(x));		\
+     __kir; })
+#endif
+
+
+/* 
+ * Beginning with EGCS 1.1, GCC defines __alpha_bwx__ when the BWX 
+ * extension is enabled.  Previous versions did not define anything
+ * we could test during compilation -- too bad, so sad.
+ */
+
+#if defined(__alpha_bwx__)
+#define __kernel_ldbu(mem)	(mem)
+#define __kernel_ldwu(mem)	(mem)
+#define __kernel_stb(val,mem)	((mem) = (val))
+#define __kernel_stw(val,mem)	((mem) = (val))
+#else
+#define __kernel_ldbu(mem)				\
+  ({ unsigned char __kir;				\
+     __asm__(".arch ev56;				\
+	      ldbu %0,%1" : "=r"(__kir) : "m"(mem));	\
+     __kir; })
+#define __kernel_ldwu(mem)				\
+  ({ unsigned short __kir;				\
+     __asm__(".arch ev56;				\
+	      ldwu %0,%1" : "=r"(__kir) : "m"(mem));	\
+     __kir; })
+#define __kernel_stb(val,mem)				\
+  __asm__(".arch ev56;					\
+	   stb %1,%0" : "=m"(mem) : "r"(val))
+#define __kernel_stw(val,mem)				\
+  __asm__(".arch ev56;					\
+	   stw %1,%0" : "=m"(mem) : "r"(val))
+#endif
+
+#ifdef __KERNEL__
+/* Some idiots over in <linux/compiler.h> thought inline should imply
+   always_inline.  This breaks stuff.  We'll include this file whenever
+   we run into such problems.  */
+
+#include <linux/compiler.h>
+#undef inline
+#undef __inline__
+#undef __inline
+#undef __always_inline
+#define __always_inline		inline __attribute__((always_inline))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_COMPILER_H */
diff --git a/arch/alpha/include/asm/console.h b/arch/alpha/include/asm/console.h
new file mode 100644
index 00000000000..a3ce4e62249
--- /dev/null
+++ b/arch/alpha/include/asm/console.h
@@ -0,0 +1,75 @@
+#ifndef __AXP_CONSOLE_H
+#define __AXP_CONSOLE_H
+
+/*
+ * Console callback routine numbers
+ */
+#define CCB_GETC		0x01
+#define CCB_PUTS		0x02
+#define CCB_RESET_TERM		0x03
+#define CCB_SET_TERM_INT	0x04
+#define CCB_SET_TERM_CTL	0x05
+#define CCB_PROCESS_KEYCODE	0x06
+#define CCB_OPEN_CONSOLE	0x07
+#define CCB_CLOSE_CONSOLE	0x08
+
+#define CCB_OPEN		0x10
+#define CCB_CLOSE		0x11
+#define CCB_IOCTL		0x12
+#define CCB_READ		0x13
+#define CCB_WRITE		0x14
+
+#define CCB_SET_ENV		0x20
+#define CCB_RESET_ENV		0x21
+#define CCB_GET_ENV		0x22
+#define CCB_SAVE_ENV		0x23
+
+#define CCB_PSWITCH		0x30
+#define CCB_BIOS_EMUL		0x32
+
+/*
+ * Environment variable numbers
+ */
+#define ENV_AUTO_ACTION		0x01
+#define ENV_BOOT_DEV		0x02
+#define ENV_BOOTDEF_DEV		0x03
+#define ENV_BOOTED_DEV		0x04
+#define ENV_BOOT_FILE		0x05
+#define ENV_BOOTED_FILE		0x06
+#define ENV_BOOT_OSFLAGS	0x07
+#define ENV_BOOTED_OSFLAGS	0x08
+#define ENV_BOOT_RESET		0x09
+#define ENV_DUMP_DEV		0x0A
+#define ENV_ENABLE_AUDIT	0x0B
+#define ENV_LICENSE		0x0C
+#define ENV_CHAR_SET		0x0D
+#define ENV_LANGUAGE		0x0E
+#define ENV_TTY_DEV		0x0F
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+extern long callback_puts(long unit, const char *s, long length);
+extern long callback_getc(long unit);
+extern long callback_open_console(void);
+extern long callback_close_console(void);
+extern long callback_open(const char *device, long length);
+extern long callback_close(long unit);
+extern long callback_read(long channel, long count, const char *buf, long lbn);
+extern long callback_getenv(long id, const char *buf, unsigned long buf_size);
+extern long callback_setenv(long id, const char *buf, unsigned long buf_size);
+extern long callback_save_env(void);
+
+extern int srm_fixup(unsigned long new_callback_addr,
+		     unsigned long new_hwrpb_addr);
+extern long srm_puts(const char *, long);
+extern long srm_printk(const char *, ...)
+	__attribute__ ((format (printf, 1, 2)));
+
+struct crb_struct;
+struct hwrpb_struct;
+extern int callback_init_done;
+extern void * callback_init(void *);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* __AXP_CONSOLE_H */
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
new file mode 100644
index 00000000000..6785ff7e02b
--- /dev/null
+++ b/arch/alpha/include/asm/core_apecs.h
@@ -0,0 +1,517 @@
+#ifndef __ALPHA_APECS__H__
+#define __ALPHA_APECS__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * APECS is the internal name for the 2107x chipset which provides
+ * memory controller and PCI access for the 21064 chip based systems.
+ *
+ * This file is based on:
+ *
+ * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
+ * Data Sheet
+ *
+ * EC-N0648-72
+ *
+ *
+ * david.rusling@reo.mts.dec.com Initial Version.
+ *
+ */
+
+/*
+   An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
+   that get passed through the PCI<->ISA bridge chip. So we've gotta use
+   both windows to max out the physical memory we can DMA to. Sigh...
+
+   If we try a window at 0 for 1GB as a work-around, we run into conflicts
+   with ISA/PCI bus memory which can't be relocated, like VGA aperture and
+   BIOS ROMs. So we must put the windows high enough to avoid these areas.
+
+   We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
+   and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
+   Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
+   be used for that range (via virt_to_bus()).
+
+   Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
+   to keep virt_to_bus() from returning an address in the first window, for
+   a data area that goes beyond the 64Mb first DMA window.  Sigh...
+   The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
+   we can't just use that here, because of header file looping... :-(
+
+   Window 1 will be used for all DMA from the ISA bus; yes, that does
+   limit what memory an ISA floppy or sound card or Ethernet can touch, but
+   it's also a known limitation on other platforms as well. We use the
+   same technique that is used on INTEL platforms with similar limitation:
+   set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
+   We trust that any ISA bus device drivers will *always* ask for DMAable
+   memory explicitly via kmalloc()/get_free_pages() flags arguments.
+
+   Note that most PCI bus devices' drivers do *not* explicitly ask for
+   DMAable memory; they count on being able to DMA to any memory they
+   get from kmalloc()/get_free_pages(). They will also use window 1 for
+   any physical memory accesses below 64Mb; the rest will be handled by
+   window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
+
+   We hope that the area before the first window is large enough so that
+   there will be no overlap at the top end (64Mb). We *must* locate the
+   PCI cards' memory just below window 1, so that there's still the
+   possibility of being able to access it via SPARSE space. This is
+   important for cards such as the Matrox Millennium, whose Xserver
+   wants to access memory-mapped registers in byte and short lengths.
+
+   Note that the XL is treated differently from the AVANTI, even though
+   for most other things they are identical. It didn't seem reasonable to
+   make the AVANTI support pay for the limitations of the XL. It is true,
+   however, that an XL kernel will run on an AVANTI without problems.
+
+   %%% All of this should be obviated by the ability to route
+   everything through the iommu.
+*/
+
+/*
+ * 21071-DA Control and Status registers.
+ * These are used for PCI memory access.
+ */
+#define APECS_IOC_DCSR                  (IDENT_ADDR + 0x1A0000000UL)
+#define APECS_IOC_PEAR                  (IDENT_ADDR + 0x1A0000020UL)
+#define APECS_IOC_SEAR                  (IDENT_ADDR + 0x1A0000040UL)
+#define APECS_IOC_DR1                   (IDENT_ADDR + 0x1A0000060UL)
+#define APECS_IOC_DR2                   (IDENT_ADDR + 0x1A0000080UL)
+#define APECS_IOC_DR3                   (IDENT_ADDR + 0x1A00000A0UL)
+
+#define APECS_IOC_TB1R                  (IDENT_ADDR + 0x1A00000C0UL)
+#define APECS_IOC_TB2R                  (IDENT_ADDR + 0x1A00000E0UL)
+
+#define APECS_IOC_PB1R                  (IDENT_ADDR + 0x1A0000100UL)
+#define APECS_IOC_PB2R                  (IDENT_ADDR + 0x1A0000120UL)
+
+#define APECS_IOC_PM1R                  (IDENT_ADDR + 0x1A0000140UL)
+#define APECS_IOC_PM2R                  (IDENT_ADDR + 0x1A0000160UL)
+
+#define APECS_IOC_HAXR0                 (IDENT_ADDR + 0x1A0000180UL)
+#define APECS_IOC_HAXR1                 (IDENT_ADDR + 0x1A00001A0UL)
+#define APECS_IOC_HAXR2                 (IDENT_ADDR + 0x1A00001C0UL)
+
+#define APECS_IOC_PMLT                  (IDENT_ADDR + 0x1A00001E0UL)
+
+#define APECS_IOC_TLBTAG0               (IDENT_ADDR + 0x1A0000200UL)
+#define APECS_IOC_TLBTAG1               (IDENT_ADDR + 0x1A0000220UL)
+#define APECS_IOC_TLBTAG2               (IDENT_ADDR + 0x1A0000240UL)
+#define APECS_IOC_TLBTAG3               (IDENT_ADDR + 0x1A0000260UL)
+#define APECS_IOC_TLBTAG4               (IDENT_ADDR + 0x1A0000280UL)
+#define APECS_IOC_TLBTAG5               (IDENT_ADDR + 0x1A00002A0UL)
+#define APECS_IOC_TLBTAG6               (IDENT_ADDR + 0x1A00002C0UL)
+#define APECS_IOC_TLBTAG7               (IDENT_ADDR + 0x1A00002E0UL)
+
+#define APECS_IOC_TLBDATA0              (IDENT_ADDR + 0x1A0000300UL)
+#define APECS_IOC_TLBDATA1              (IDENT_ADDR + 0x1A0000320UL)
+#define APECS_IOC_TLBDATA2              (IDENT_ADDR + 0x1A0000340UL)
+#define APECS_IOC_TLBDATA3              (IDENT_ADDR + 0x1A0000360UL)
+#define APECS_IOC_TLBDATA4              (IDENT_ADDR + 0x1A0000380UL)
+#define APECS_IOC_TLBDATA5              (IDENT_ADDR + 0x1A00003A0UL)
+#define APECS_IOC_TLBDATA6              (IDENT_ADDR + 0x1A00003C0UL)
+#define APECS_IOC_TLBDATA7              (IDENT_ADDR + 0x1A00003E0UL)
+
+#define APECS_IOC_TBIA                  (IDENT_ADDR + 0x1A0000400UL)
+
+
+/*
+ * 21071-CA Control and Status registers.
+ * These are used to program memory timing,
+ *  configure memory and initialise the B-Cache.
+ */
+#define APECS_MEM_GCR		        (IDENT_ADDR + 0x180000000UL)
+#define APECS_MEM_EDSR		        (IDENT_ADDR + 0x180000040UL)
+#define APECS_MEM_TAR  		        (IDENT_ADDR + 0x180000060UL)
+#define APECS_MEM_ELAR		        (IDENT_ADDR + 0x180000080UL)
+#define APECS_MEM_EHAR  		(IDENT_ADDR + 0x1800000a0UL)
+#define APECS_MEM_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
+#define APECS_MEM_LDxLAR 		(IDENT_ADDR + 0x1800000e0UL)
+#define APECS_MEM_LDxHAR 		(IDENT_ADDR + 0x180000100UL)
+#define APECS_MEM_GTR    		(IDENT_ADDR + 0x180000200UL)
+#define APECS_MEM_RTR    		(IDENT_ADDR + 0x180000220UL)
+#define APECS_MEM_VFPR   		(IDENT_ADDR + 0x180000240UL)
+#define APECS_MEM_PDLDR  		(IDENT_ADDR + 0x180000260UL)
+#define APECS_MEM_PDhDR  		(IDENT_ADDR + 0x180000280UL)
+
+/* Bank x Base Address Register */
+#define APECS_MEM_B0BAR  		(IDENT_ADDR + 0x180000800UL)
+#define APECS_MEM_B1BAR  		(IDENT_ADDR + 0x180000820UL)
+#define APECS_MEM_B2BAR  		(IDENT_ADDR + 0x180000840UL)
+#define APECS_MEM_B3BAR  		(IDENT_ADDR + 0x180000860UL)
+#define APECS_MEM_B4BAR  		(IDENT_ADDR + 0x180000880UL)
+#define APECS_MEM_B5BAR  		(IDENT_ADDR + 0x1800008A0UL)
+#define APECS_MEM_B6BAR  		(IDENT_ADDR + 0x1800008C0UL)
+#define APECS_MEM_B7BAR  		(IDENT_ADDR + 0x1800008E0UL)
+#define APECS_MEM_B8BAR  		(IDENT_ADDR + 0x180000900UL)
+
+/* Bank x Configuration Register */
+#define APECS_MEM_B0BCR  		(IDENT_ADDR + 0x180000A00UL)
+#define APECS_MEM_B1BCR  		(IDENT_ADDR + 0x180000A20UL)
+#define APECS_MEM_B2BCR  		(IDENT_ADDR + 0x180000A40UL)
+#define APECS_MEM_B3BCR  		(IDENT_ADDR + 0x180000A60UL)
+#define APECS_MEM_B4BCR  		(IDENT_ADDR + 0x180000A80UL)
+#define APECS_MEM_B5BCR  		(IDENT_ADDR + 0x180000AA0UL)
+#define APECS_MEM_B6BCR  		(IDENT_ADDR + 0x180000AC0UL)
+#define APECS_MEM_B7BCR  		(IDENT_ADDR + 0x180000AE0UL)
+#define APECS_MEM_B8BCR  		(IDENT_ADDR + 0x180000B00UL)
+
+/* Bank x Timing Register A */
+#define APECS_MEM_B0TRA  		(IDENT_ADDR + 0x180000C00UL)
+#define APECS_MEM_B1TRA  		(IDENT_ADDR + 0x180000C20UL)
+#define APECS_MEM_B2TRA  		(IDENT_ADDR + 0x180000C40UL)
+#define APECS_MEM_B3TRA  		(IDENT_ADDR + 0x180000C60UL)
+#define APECS_MEM_B4TRA  		(IDENT_ADDR + 0x180000C80UL)
+#define APECS_MEM_B5TRA  		(IDENT_ADDR + 0x180000CA0UL)
+#define APECS_MEM_B6TRA  		(IDENT_ADDR + 0x180000CC0UL)
+#define APECS_MEM_B7TRA  		(IDENT_ADDR + 0x180000CE0UL)
+#define APECS_MEM_B8TRA  		(IDENT_ADDR + 0x180000D00UL)
+
+/* Bank x Timing Register B */
+#define APECS_MEM_B0TRB                 (IDENT_ADDR + 0x180000E00UL)
+#define APECS_MEM_B1TRB  		(IDENT_ADDR + 0x180000E20UL)
+#define APECS_MEM_B2TRB  		(IDENT_ADDR + 0x180000E40UL)
+#define APECS_MEM_B3TRB  		(IDENT_ADDR + 0x180000E60UL)
+#define APECS_MEM_B4TRB  		(IDENT_ADDR + 0x180000E80UL)
+#define APECS_MEM_B5TRB  		(IDENT_ADDR + 0x180000EA0UL)
+#define APECS_MEM_B6TRB  		(IDENT_ADDR + 0x180000EC0UL)
+#define APECS_MEM_B7TRB  		(IDENT_ADDR + 0x180000EE0UL)
+#define APECS_MEM_B8TRB  		(IDENT_ADDR + 0x180000F00UL)
+
+
+/*
+ * Memory spaces:
+ */
+#define APECS_IACK_SC		        (IDENT_ADDR + 0x1b0000000UL)
+#define APECS_CONF		        (IDENT_ADDR + 0x1e0000000UL)
+#define APECS_IO			(IDENT_ADDR + 0x1c0000000UL)
+#define APECS_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
+#define APECS_DENSE_MEM		        (IDENT_ADDR + 0x300000000UL)
+
+
+/*
+ * Bit definitions for I/O Controller status register 0:
+ */
+#define APECS_IOC_STAT0_CMD		0xf
+#define APECS_IOC_STAT0_ERR		(1<<4)
+#define APECS_IOC_STAT0_LOST		(1<<5)
+#define APECS_IOC_STAT0_THIT		(1<<6)
+#define APECS_IOC_STAT0_TREF		(1<<7)
+#define APECS_IOC_STAT0_CODE_SHIFT	8
+#define APECS_IOC_STAT0_CODE_MASK	0x7
+#define APECS_IOC_STAT0_P_NBR_SHIFT	13
+#define APECS_IOC_STAT0_P_NBR_MASK	0x7ffff
+
+#define APECS_HAE_ADDRESS		APECS_IOC_HAXR1
+
+
+/*
+ * Data structure for handling APECS machine checks:
+ */
+
+struct el_apecs_mikasa_sysdata_mcheck
+{
+	unsigned long coma_gcr;
+	unsigned long coma_edsr;
+	unsigned long coma_ter;
+	unsigned long coma_elar;
+	unsigned long coma_ehar;
+	unsigned long coma_ldlr;
+	unsigned long coma_ldhr;
+	unsigned long coma_base0;
+	unsigned long coma_base1;
+	unsigned long coma_base2;
+	unsigned long coma_base3;
+	unsigned long coma_cnfg0;
+	unsigned long coma_cnfg1;
+	unsigned long coma_cnfg2;
+	unsigned long coma_cnfg3;
+	unsigned long epic_dcsr;
+	unsigned long epic_pear;
+	unsigned long epic_sear;
+	unsigned long epic_tbr1;
+	unsigned long epic_tbr2;
+	unsigned long epic_pbr1;
+	unsigned long epic_pbr2;
+	unsigned long epic_pmr1;
+	unsigned long epic_pmr2;
+	unsigned long epic_harx1;
+	unsigned long epic_harx2;
+	unsigned long epic_pmlt;
+	unsigned long epic_tag0;
+	unsigned long epic_tag1;
+	unsigned long epic_tag2;
+	unsigned long epic_tag3;
+	unsigned long epic_tag4;
+	unsigned long epic_tag5;
+	unsigned long epic_tag6;
+	unsigned long epic_tag7;
+	unsigned long epic_data0;
+	unsigned long epic_data1;
+	unsigned long epic_data2;
+	unsigned long epic_data3;
+	unsigned long epic_data4;
+	unsigned long epic_data5;
+	unsigned long epic_data6;
+	unsigned long epic_data7;
+
+	unsigned long pceb_vid;
+	unsigned long pceb_did;
+	unsigned long pceb_revision;
+	unsigned long pceb_command;
+	unsigned long pceb_status;
+	unsigned long pceb_latency;
+	unsigned long pceb_control;
+	unsigned long pceb_arbcon;
+	unsigned long pceb_arbpri;
+
+	unsigned long esc_id;
+	unsigned long esc_revision;
+	unsigned long esc_int0;
+	unsigned long esc_int1;
+	unsigned long esc_elcr0;
+	unsigned long esc_elcr1;
+	unsigned long esc_last_eisa;
+	unsigned long esc_nmi_stat;
+
+	unsigned long pci_ir;
+	unsigned long pci_imr;
+	unsigned long svr_mgr;
+};
+
+/* This for the normal APECS machines.  */
+struct el_apecs_sysdata_mcheck
+{
+	unsigned long coma_gcr;
+	unsigned long coma_edsr;
+	unsigned long coma_ter;
+	unsigned long coma_elar;
+	unsigned long coma_ehar;
+	unsigned long coma_ldlr;
+	unsigned long coma_ldhr;
+	unsigned long coma_base0;
+	unsigned long coma_base1;
+	unsigned long coma_base2;
+	unsigned long coma_cnfg0;
+	unsigned long coma_cnfg1;
+	unsigned long coma_cnfg2;
+	unsigned long epic_dcsr;
+	unsigned long epic_pear;
+	unsigned long epic_sear;
+	unsigned long epic_tbr1;
+	unsigned long epic_tbr2;
+	unsigned long epic_pbr1;
+	unsigned long epic_pbr2;
+	unsigned long epic_pmr1;
+	unsigned long epic_pmr2;
+	unsigned long epic_harx1;
+	unsigned long epic_harx2;
+	unsigned long epic_pmlt;
+	unsigned long epic_tag0;
+	unsigned long epic_tag1;
+	unsigned long epic_tag2;
+	unsigned long epic_tag3;
+	unsigned long epic_tag4;
+	unsigned long epic_tag5;
+	unsigned long epic_tag6;
+	unsigned long epic_tag7;
+	unsigned long epic_data0;
+	unsigned long epic_data1;
+	unsigned long epic_data2;
+	unsigned long epic_data3;
+	unsigned long epic_data4;
+	unsigned long epic_data5;
+	unsigned long epic_data6;
+	unsigned long epic_data7;
+};
+
+struct el_apecs_procdata
+{
+	unsigned long paltemp[32];  /* PAL TEMP REGS. */
+	/* EV4-specific fields */
+	unsigned long exc_addr;     /* Address of excepting instruction. */
+	unsigned long exc_sum;      /* Summary of arithmetic traps. */
+	unsigned long exc_mask;     /* Exception mask (from exc_sum). */
+	unsigned long iccsr;        /* IBox hardware enables. */
+	unsigned long pal_base;     /* Base address for PALcode. */
+	unsigned long hier;         /* Hardware Interrupt Enable. */
+	unsigned long hirr;         /* Hardware Interrupt Request. */
+	unsigned long csr;          /* D-stream fault info. */
+	unsigned long dc_stat;      /* D-cache status (ECC/Parity Err). */
+	unsigned long dc_addr;      /* EV3 Phys Addr for ECC/DPERR. */
+	unsigned long abox_ctl;     /* ABox Control Register. */
+	unsigned long biu_stat;     /* BIU Status. */
+	unsigned long biu_addr;     /* BUI Address. */
+	unsigned long biu_ctl;      /* BIU Control. */
+	unsigned long fill_syndrome;/* For correcting ECC errors. */
+	unsigned long fill_addr;    /* Cache block which was being read */
+	unsigned long va;           /* Effective VA of fault or miss. */
+	unsigned long bc_tag;       /* Backup Cache Tag Probe Results.*/
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * Unlike Jensen, the APECS machines have no concept of local
+ * I/O---everything goes over the PCI bus.
+ *
+ * There is plenty room for optimization here.  In particular,
+ * the Alpha's insb/insw/extb/extw should be useful in moving
+ * data to/from the right byte-lanes.
+ */
+
+#define vip	volatile int __force *
+#define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
+
+#define APECS_SET_HAE						\
+	do {							\
+		if (addr >= (1UL << 24)) {			\
+			unsigned long msb = addr & 0xf8000000;	\
+			addr -= msb;				\
+			set_hae(msb);				\
+		}						\
+	} while (0)
+
+__EXTERN_INLINE unsigned int apecs_ioread8(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= APECS_DENSE_MEM) {
+		addr -= APECS_DENSE_MEM;
+		APECS_SET_HAE;
+		base_and_type = APECS_SPARSE_MEM + 0x00;
+	} else {
+		addr -= APECS_IO;
+		base_and_type = APECS_IO + 0x00;
+	}
+
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= APECS_DENSE_MEM) {
+		addr -= APECS_DENSE_MEM;
+		APECS_SET_HAE;
+		base_and_type = APECS_SPARSE_MEM + 0x00;
+	} else {
+		addr -= APECS_IO;
+		base_and_type = APECS_IO + 0x00;
+	}
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int apecs_ioread16(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= APECS_DENSE_MEM) {
+		addr -= APECS_DENSE_MEM;
+		APECS_SET_HAE;
+		base_and_type = APECS_SPARSE_MEM + 0x08;
+	} else {
+		addr -= APECS_IO;
+		base_and_type = APECS_IO + 0x08;
+	}
+
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extwl(result, addr & 3);
+}
+
+__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= APECS_DENSE_MEM) {
+		addr -= APECS_DENSE_MEM;
+		APECS_SET_HAE;
+		base_and_type = APECS_SPARSE_MEM + 0x08;
+	} else {
+		addr -= APECS_IO;
+		base_and_type = APECS_IO + 0x08;
+	}
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int apecs_ioread32(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < APECS_DENSE_MEM)
+		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
+	return *(vuip)addr;
+}
+
+__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < APECS_DENSE_MEM)
+		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
+	*(vuip)addr = b;
+}
+
+__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + APECS_IO);
+}
+
+__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
+					    unsigned long size)
+{
+	return (void __iomem *)(addr + APECS_DENSE_MEM);
+}
+
+__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
+{
+	return addr >= IDENT_ADDR + 0x180000000UL;
+}
+
+__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= APECS_DENSE_MEM;
+}
+
+#undef APECS_SET_HAE
+
+#undef vip
+#undef vuip
+#undef vulp
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		apecs
+#define apecs_trivial_io_bw	0
+#define apecs_trivial_io_lq	0
+#define apecs_trivial_rw_bw	2
+#define apecs_trivial_rw_lq	1
+#define apecs_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_APECS__H__ */
diff --git a/arch/alpha/include/asm/core_cia.h b/arch/alpha/include/asm/core_cia.h
new file mode 100644
index 00000000000..9e0516c0ca2
--- /dev/null
+++ b/arch/alpha/include/asm/core_cia.h
@@ -0,0 +1,500 @@
+#ifndef __ALPHA_CIA__H__
+#define __ALPHA_CIA__H__
+
+/* Define to experiment with fitting everything into one 512MB HAE window.  */
+#define CIA_ONE_HAE_WINDOW 1
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * CIA is the internal name for the 21171 chipset which provides
+ * memory controller and PCI access for the 21164 chip based systems.
+ * Also supported here is the 21172 (CIA-2) and 21174 (PYXIS).
+ *
+ * The lineage is a bit confused, since the 21174 was reportedly started
+ * from the 21171 Pass 1 mask, and so is missing bug fixes that appear
+ * in 21171 Pass 2 and 21172, but it also contains additional features.
+ *
+ * This file is based on:
+ *
+ * DECchip 21171 Core Logic Chipset
+ * Technical Reference Manual
+ *
+ * EC-QE18B-TE
+ *
+ * david.rusling@reo.mts.dec.com Initial Version.
+ *
+ */
+
+/*
+ * CIA ADDRESS BIT DEFINITIONS
+ *
+ *  3333 3333 3322 2222 2222 1111 1111 11
+ *  9876 5432 1098 7654 3210 9876 5432 1098 7654 3210
+ *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
+ *  1                                             000
+ *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
+ *  |                                             |\|
+ *  |                               Byte Enable --+ |
+ *  |                             Transfer Length --+
+ *  +-- IO space, not cached
+ *
+ *   Byte      Transfer
+ *   Enable    Length    Transfer  Byte    Address
+ *   adr<6:5>  adr<4:3>  Length    Enable  Adder
+ *   ---------------------------------------------
+ *      00        00      Byte      1110   0x000
+ *      01        00      Byte      1101   0x020
+ *      10        00      Byte      1011   0x040
+ *      11        00      Byte      0111   0x060
+ *
+ *      00        01      Word      1100   0x008
+ *      01        01      Word      1001   0x028 <= Not supported in this code.
+ *      10        01      Word      0011   0x048
+ *
+ *      00        10      Tribyte   1000   0x010
+ *      01        10      Tribyte   0001   0x030
+ *
+ *      10        11      Longword  0000   0x058
+ *
+ *      Note that byte enables are asserted low.
+ *
+ */
+
+#define CIA_MEM_R1_MASK 0x1fffffff  /* SPARSE Mem region 1 mask is 29 bits */
+#define CIA_MEM_R2_MASK 0x07ffffff  /* SPARSE Mem region 2 mask is 27 bits */
+#define CIA_MEM_R3_MASK 0x03ffffff  /* SPARSE Mem region 3 mask is 26 bits */
+
+/*
+ * 21171-CA Control and Status Registers
+ */
+#define CIA_IOC_CIA_REV			(IDENT_ADDR + 0x8740000080UL)
+#  define CIA_REV_MASK			0xff
+#define CIA_IOC_PCI_LAT			(IDENT_ADDR + 0x87400000C0UL)
+#define CIA_IOC_CIA_CTRL		(IDENT_ADDR + 0x8740000100UL)
+#  define CIA_CTRL_PCI_EN		(1 << 0)
+#  define CIA_CTRL_PCI_LOCK_EN		(1 << 1)
+#  define CIA_CTRL_PCI_LOOP_EN		(1 << 2)
+#  define CIA_CTRL_FST_BB_EN		(1 << 3)
+#  define CIA_CTRL_PCI_MST_EN		(1 << 4)
+#  define CIA_CTRL_PCI_MEM_EN		(1 << 5)
+#  define CIA_CTRL_PCI_REQ64_EN		(1 << 6)
+#  define CIA_CTRL_PCI_ACK64_EN		(1 << 7)
+#  define CIA_CTRL_ADDR_PE_EN		(1 << 8)
+#  define CIA_CTRL_PERR_EN		(1 << 9)
+#  define CIA_CTRL_FILL_ERR_EN		(1 << 10)
+#  define CIA_CTRL_MCHK_ERR_EN		(1 << 11)
+#  define CIA_CTRL_ECC_CHK_EN		(1 << 12)
+#  define CIA_CTRL_ASSERT_IDLE_BC	(1 << 13)
+#  define CIA_CTRL_COM_IDLE_BC		(1 << 14)
+#  define CIA_CTRL_CSR_IOA_BYPASS	(1 << 15)
+#  define CIA_CTRL_IO_FLUSHREQ_EN	(1 << 16)
+#  define CIA_CTRL_CPU_FLUSHREQ_EN	(1 << 17)
+#  define CIA_CTRL_ARB_CPU_EN		(1 << 18)
+#  define CIA_CTRL_EN_ARB_LINK		(1 << 19)
+#  define CIA_CTRL_RD_TYPE_SHIFT	20
+#  define CIA_CTRL_RL_TYPE_SHIFT	24
+#  define CIA_CTRL_RM_TYPE_SHIFT	28
+#  define CIA_CTRL_EN_DMA_RD_PERF	(1 << 31)
+#define CIA_IOC_CIA_CNFG		(IDENT_ADDR + 0x8740000140UL)
+#  define CIA_CNFG_IOA_BWEN		(1 << 0)
+#  define CIA_CNFG_PCI_MWEN		(1 << 4)
+#  define CIA_CNFG_PCI_DWEN		(1 << 5)
+#  define CIA_CNFG_PCI_WLEN		(1 << 8)
+#define CIA_IOC_FLASH_CTRL		(IDENT_ADDR + 0x8740000200UL)
+#define CIA_IOC_HAE_MEM			(IDENT_ADDR + 0x8740000400UL)
+#define CIA_IOC_HAE_IO			(IDENT_ADDR + 0x8740000440UL)
+#define CIA_IOC_CFG			(IDENT_ADDR + 0x8740000480UL)
+#define CIA_IOC_CACK_EN			(IDENT_ADDR + 0x8740000600UL)
+#  define CIA_CACK_EN_LOCK_EN		(1 << 0)
+#  define CIA_CACK_EN_MB_EN		(1 << 1)
+#  define CIA_CACK_EN_SET_DIRTY_EN	(1 << 2)
+#  define CIA_CACK_EN_BC_VICTIM_EN	(1 << 3)
+
+
+/*
+ * 21171-CA Diagnostic Registers
+ */
+#define CIA_IOC_CIA_DIAG		(IDENT_ADDR + 0x8740002000UL)
+#define CIA_IOC_DIAG_CHECK		(IDENT_ADDR + 0x8740003000UL)
+
+/*
+ * 21171-CA Performance Monitor registers
+ */
+#define CIA_IOC_PERF_MONITOR		(IDENT_ADDR + 0x8740004000UL)
+#define CIA_IOC_PERF_CONTROL		(IDENT_ADDR + 0x8740004040UL)
+
+/*
+ * 21171-CA Error registers
+ */
+#define CIA_IOC_CPU_ERR0		(IDENT_ADDR + 0x8740008000UL)
+#define CIA_IOC_CPU_ERR1		(IDENT_ADDR + 0x8740008040UL)
+#define CIA_IOC_CIA_ERR			(IDENT_ADDR + 0x8740008200UL)
+#  define CIA_ERR_COR_ERR		(1 << 0)
+#  define CIA_ERR_UN_COR_ERR		(1 << 1)
+#  define CIA_ERR_CPU_PE		(1 << 2)
+#  define CIA_ERR_MEM_NEM		(1 << 3)
+#  define CIA_ERR_PCI_SERR		(1 << 4)
+#  define CIA_ERR_PERR			(1 << 5)
+#  define CIA_ERR_PCI_ADDR_PE		(1 << 6)
+#  define CIA_ERR_RCVD_MAS_ABT		(1 << 7)
+#  define CIA_ERR_RCVD_TAR_ABT		(1 << 8)
+#  define CIA_ERR_PA_PTE_INV		(1 << 9)
+#  define CIA_ERR_FROM_WRT_ERR		(1 << 10)
+#  define CIA_ERR_IOA_TIMEOUT		(1 << 11)
+#  define CIA_ERR_LOST_CORR_ERR		(1 << 16)
+#  define CIA_ERR_LOST_UN_CORR_ERR	(1 << 17)
+#  define CIA_ERR_LOST_CPU_PE		(1 << 18)
+#  define CIA_ERR_LOST_MEM_NEM		(1 << 19)
+#  define CIA_ERR_LOST_PERR		(1 << 21)
+#  define CIA_ERR_LOST_PCI_ADDR_PE	(1 << 22)
+#  define CIA_ERR_LOST_RCVD_MAS_ABT	(1 << 23)
+#  define CIA_ERR_LOST_RCVD_TAR_ABT	(1 << 24)
+#  define CIA_ERR_LOST_PA_PTE_INV	(1 << 25)
+#  define CIA_ERR_LOST_FROM_WRT_ERR	(1 << 26)
+#  define CIA_ERR_LOST_IOA_TIMEOUT	(1 << 27)
+#  define CIA_ERR_VALID			(1 << 31)
+#define CIA_IOC_CIA_STAT		(IDENT_ADDR + 0x8740008240UL)
+#define CIA_IOC_ERR_MASK		(IDENT_ADDR + 0x8740008280UL)
+#define CIA_IOC_CIA_SYN			(IDENT_ADDR + 0x8740008300UL)
+#define CIA_IOC_MEM_ERR0		(IDENT_ADDR + 0x8740008400UL)
+#define CIA_IOC_MEM_ERR1		(IDENT_ADDR + 0x8740008440UL)
+#define CIA_IOC_PCI_ERR0		(IDENT_ADDR + 0x8740008800UL)
+#define CIA_IOC_PCI_ERR1		(IDENT_ADDR + 0x8740008840UL)
+#define CIA_IOC_PCI_ERR3		(IDENT_ADDR + 0x8740008880UL)
+
+/*
+ * 21171-CA System configuration registers
+ */
+#define CIA_IOC_MCR			(IDENT_ADDR + 0x8750000000UL)
+#define CIA_IOC_MBA0			(IDENT_ADDR + 0x8750000600UL)
+#define CIA_IOC_MBA2			(IDENT_ADDR + 0x8750000680UL)
+#define CIA_IOC_MBA4			(IDENT_ADDR + 0x8750000700UL)
+#define CIA_IOC_MBA6			(IDENT_ADDR + 0x8750000780UL)
+#define CIA_IOC_MBA8			(IDENT_ADDR + 0x8750000800UL)
+#define CIA_IOC_MBAA			(IDENT_ADDR + 0x8750000880UL)
+#define CIA_IOC_MBAC			(IDENT_ADDR + 0x8750000900UL)
+#define CIA_IOC_MBAE			(IDENT_ADDR + 0x8750000980UL)
+#define CIA_IOC_TMG0			(IDENT_ADDR + 0x8750000B00UL)
+#define CIA_IOC_TMG1			(IDENT_ADDR + 0x8750000B40UL)
+#define CIA_IOC_TMG2			(IDENT_ADDR + 0x8750000B80UL)
+
+/*
+ * 2117A-CA PCI Address and Scatter-Gather Registers.
+ */
+#define CIA_IOC_PCI_TBIA		(IDENT_ADDR + 0x8760000100UL)
+
+#define CIA_IOC_PCI_W0_BASE		(IDENT_ADDR + 0x8760000400UL)
+#define CIA_IOC_PCI_W0_MASK		(IDENT_ADDR + 0x8760000440UL)
+#define CIA_IOC_PCI_T0_BASE		(IDENT_ADDR + 0x8760000480UL)
+
+#define CIA_IOC_PCI_W1_BASE		(IDENT_ADDR + 0x8760000500UL)
+#define CIA_IOC_PCI_W1_MASK		(IDENT_ADDR + 0x8760000540UL)
+#define CIA_IOC_PCI_T1_BASE		(IDENT_ADDR + 0x8760000580UL)
+
+#define CIA_IOC_PCI_W2_BASE		(IDENT_ADDR + 0x8760000600UL)
+#define CIA_IOC_PCI_W2_MASK		(IDENT_ADDR + 0x8760000640UL)
+#define CIA_IOC_PCI_T2_BASE		(IDENT_ADDR + 0x8760000680UL)
+
+#define CIA_IOC_PCI_W3_BASE		(IDENT_ADDR + 0x8760000700UL)
+#define CIA_IOC_PCI_W3_MASK		(IDENT_ADDR + 0x8760000740UL)
+#define CIA_IOC_PCI_T3_BASE		(IDENT_ADDR + 0x8760000780UL)
+
+#define CIA_IOC_PCI_Wn_BASE(N)	(IDENT_ADDR + 0x8760000400UL + (N)*0x100) 
+#define CIA_IOC_PCI_Wn_MASK(N)	(IDENT_ADDR + 0x8760000440UL + (N)*0x100) 
+#define CIA_IOC_PCI_Tn_BASE(N)	(IDENT_ADDR + 0x8760000480UL + (N)*0x100) 
+
+#define CIA_IOC_PCI_W_DAC		(IDENT_ADDR + 0x87600007C0UL)
+
+/*
+ * 2117A-CA Address Translation Registers.
+ */
+
+/* 8 tag registers, the first 4 of which are lockable.  */
+#define CIA_IOC_TB_TAGn(n) \
+	(IDENT_ADDR + 0x8760000800UL + (n)*0x40)
+
+/* 4 page registers per tag register.  */
+#define CIA_IOC_TBn_PAGEm(n,m) \
+	(IDENT_ADDR + 0x8760001000UL + (n)*0x100 + (m)*0x40)
+
+/*
+ * Memory spaces:
+ */
+#define CIA_IACK_SC			(IDENT_ADDR + 0x8720000000UL)
+#define CIA_CONF			(IDENT_ADDR + 0x8700000000UL)
+#define CIA_IO				(IDENT_ADDR + 0x8580000000UL)
+#define CIA_SPARSE_MEM			(IDENT_ADDR + 0x8000000000UL)
+#define CIA_SPARSE_MEM_R2		(IDENT_ADDR + 0x8400000000UL)
+#define CIA_SPARSE_MEM_R3		(IDENT_ADDR + 0x8500000000UL)
+#define CIA_DENSE_MEM		        (IDENT_ADDR + 0x8600000000UL)
+#define CIA_BW_MEM			(IDENT_ADDR + 0x8800000000UL)
+#define CIA_BW_IO			(IDENT_ADDR + 0x8900000000UL)
+#define CIA_BW_CFG_0			(IDENT_ADDR + 0x8a00000000UL)
+#define CIA_BW_CFG_1			(IDENT_ADDR + 0x8b00000000UL)
+
+/*
+ * ALCOR's GRU ASIC registers
+ */
+#define GRU_INT_REQ			(IDENT_ADDR + 0x8780000000UL)
+#define GRU_INT_MASK			(IDENT_ADDR + 0x8780000040UL)
+#define GRU_INT_EDGE			(IDENT_ADDR + 0x8780000080UL)
+#define GRU_INT_HILO			(IDENT_ADDR + 0x87800000C0UL)
+#define GRU_INT_CLEAR			(IDENT_ADDR + 0x8780000100UL)
+
+#define GRU_CACHE_CNFG			(IDENT_ADDR + 0x8780000200UL)
+#define GRU_SCR				(IDENT_ADDR + 0x8780000300UL)
+#define GRU_LED				(IDENT_ADDR + 0x8780000800UL)
+#define GRU_RESET			(IDENT_ADDR + 0x8780000900UL)
+
+#define ALCOR_GRU_INT_REQ_BITS		0x800fffffUL
+#define XLT_GRU_INT_REQ_BITS		0x80003fffUL
+#define GRU_INT_REQ_BITS		(alpha_mv.sys.cia.gru_int_req_bits+0)
+
+/*
+ * PYXIS interrupt control registers
+ */
+#define PYXIS_INT_REQ			(IDENT_ADDR + 0x87A0000000UL)
+#define PYXIS_INT_MASK			(IDENT_ADDR + 0x87A0000040UL)
+#define PYXIS_INT_HILO			(IDENT_ADDR + 0x87A00000C0UL)
+#define PYXIS_INT_ROUTE			(IDENT_ADDR + 0x87A0000140UL)
+#define PYXIS_GPO			(IDENT_ADDR + 0x87A0000180UL)
+#define PYXIS_INT_CNFG			(IDENT_ADDR + 0x87A00001C0UL)
+#define PYXIS_RT_COUNT			(IDENT_ADDR + 0x87A0000200UL)
+#define PYXIS_INT_TIME			(IDENT_ADDR + 0x87A0000240UL)
+#define PYXIS_IIC_CTRL			(IDENT_ADDR + 0x87A00002C0UL)
+#define PYXIS_RESET			(IDENT_ADDR + 0x8780000900UL)
+
+/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
+#define PYXIS_DAC_OFFSET		(1UL << 40)
+
+/*
+ * Data structure for handling CIA machine checks.
+ */
+
+/* System-specific info.  */
+struct el_CIA_sysdata_mcheck {
+	unsigned long	cpu_err0;
+	unsigned long	cpu_err1;
+	unsigned long	cia_err;
+	unsigned long	cia_stat;
+	unsigned long	err_mask;
+	unsigned long	cia_syn;
+	unsigned long	mem_err0;
+	unsigned long	mem_err1;
+	unsigned long	pci_err0;
+	unsigned long	pci_err1;
+	unsigned long	pci_err2;
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+/* Do not touch, this should *NOT* be static inline */
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * CIA (the 2117x PCI/memory support chipset for the EV5 (21164)
+ * series of processors uses a sparse address mapping scheme to
+ * get at PCI memory and I/O.
+ */
+
+/*
+ * Memory functions.  64-bit and 32-bit accesses are done through
+ * dense memory space, everything else through sparse space.
+ *
+ * For reading and writing 8 and 16 bit quantities we need to
+ * go through one of the three sparse address mapping regions
+ * and use the HAE_MEM CSR to provide some bits of the address.
+ * The following few routines use only sparse address region 1
+ * which gives 1Gbyte of accessible space which relates exactly
+ * to the amount of PCI memory mapping *into* system address space.
+ * See p 6-17 of the specification but it looks something like this:
+ *
+ * 21164 Address:
+ *
+ *          3         2         1
+ * 9876543210987654321098765432109876543210
+ * 1ZZZZ0.PCI.QW.Address............BBLL
+ *
+ * ZZ = SBZ
+ * BB = Byte offset
+ * LL = Transfer length
+ *
+ * PCI Address:
+ *
+ * 3         2         1
+ * 10987654321098765432109876543210
+ * HHH....PCI.QW.Address........ 00
+ *
+ * HHH = 31:29 HAE_MEM CSR
+ *
+ */
+
+#define vip	volatile int __force *
+#define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
+
+__EXTERN_INLINE unsigned int cia_ioread8(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= CIA_DENSE_MEM)
+		base_and_type = CIA_SPARSE_MEM + 0x00;
+	else
+		base_and_type = CIA_IO + 0x00;
+
+	/* We can use CIA_MEM_R1_MASK for io ports too, since it is large
+	   enough to cover all io ports, and smaller than CIA_IO.  */
+	addr &= CIA_MEM_R1_MASK;
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= CIA_DENSE_MEM)
+		base_and_type = CIA_SPARSE_MEM + 0x00;
+	else
+		base_and_type = CIA_IO + 0x00;
+
+	addr &= CIA_MEM_R1_MASK;
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int cia_ioread16(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= CIA_DENSE_MEM)
+		base_and_type = CIA_SPARSE_MEM + 0x08;
+	else
+		base_and_type = CIA_IO + 0x08;
+
+	addr &= CIA_MEM_R1_MASK;
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extwl(result, addr & 3);
+}
+
+__EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= CIA_DENSE_MEM)
+		base_and_type = CIA_SPARSE_MEM + 0x08;
+	else
+		base_and_type = CIA_IO + 0x08;
+
+	addr &= CIA_MEM_R1_MASK;
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int cia_ioread32(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	return *(vuip)addr;
+}
+
+__EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	*(vuip)addr = b;
+}
+
+__EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + CIA_IO);
+}
+
+__EXTERN_INLINE void __iomem *cia_ioremap(unsigned long addr,
+					  unsigned long size)
+{
+	return (void __iomem *)(addr + CIA_DENSE_MEM);
+}
+
+__EXTERN_INLINE int cia_is_ioaddr(unsigned long addr)
+{
+	return addr >= IDENT_ADDR + 0x8000000000UL;
+}
+
+__EXTERN_INLINE int cia_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= CIA_DENSE_MEM;
+}
+
+__EXTERN_INLINE void __iomem *cia_bwx_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + CIA_BW_IO);
+}
+
+__EXTERN_INLINE void __iomem *cia_bwx_ioremap(unsigned long addr,
+					      unsigned long size)
+{
+	return (void __iomem *)(addr + CIA_BW_MEM);
+}
+
+__EXTERN_INLINE int cia_bwx_is_ioaddr(unsigned long addr)
+{
+	return addr >= IDENT_ADDR + 0x8000000000UL;
+}
+
+__EXTERN_INLINE int cia_bwx_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr < CIA_BW_IO;
+}
+
+#undef vip
+#undef vuip
+#undef vulp
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		cia
+#define cia_trivial_rw_bw	2
+#define cia_trivial_rw_lq	1
+#define cia_trivial_io_bw	0
+#define cia_trivial_io_lq	0
+#define cia_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		cia_bwx
+#define cia_bwx_trivial_rw_bw	1
+#define cia_bwx_trivial_rw_lq	1
+#define cia_bwx_trivial_io_bw	1
+#define cia_bwx_trivial_io_lq	1
+#define cia_bwx_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#undef __IO_PREFIX
+#ifdef CONFIG_ALPHA_PYXIS
+#define __IO_PREFIX		cia_bwx
+#else
+#define __IO_PREFIX		cia
+#endif
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_CIA__H__ */
diff --git a/arch/alpha/include/asm/core_irongate.h b/arch/alpha/include/asm/core_irongate.h
new file mode 100644
index 00000000000..24b2db54150
--- /dev/null
+++ b/arch/alpha/include/asm/core_irongate.h
@@ -0,0 +1,232 @@
+#ifndef __ALPHA_IRONGATE__H__
+#define __ALPHA_IRONGATE__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * IRONGATE is the internal name for the AMD-751 K7 core logic chipset
+ * which provides memory controller and PCI access for NAUTILUS-based
+ * EV6 (21264) systems.
+ *
+ * This file is based on:
+ *
+ * IronGate management library, (c) 1999 Alpha Processor, Inc.
+ * Copyright (C) 1999 Alpha Processor, Inc.,
+ *	(David Daniel, Stig Telfer, Soohoon Lee)
+ */
+
+/*
+ * The 21264 supports, and internally recognizes, a 44-bit physical
+ * address space that is divided equally between memory address space
+ * and I/O address space. Memory address space resides in the lower
+ * half of the physical address space (PA[43]=0) and I/O address space
+ * resides in the upper half of the physical address space (PA[43]=1).
+ */
+
+/*
+ * Irongate CSR map.  Some of the CSRs are 8 or 16 bits, but all access
+ * through the routines given is 32-bit.
+ *
+ * The first 0x40 bytes are standard as per the PCI spec.
+ */
+
+typedef volatile __u32	igcsr32;
+
+typedef struct {
+	igcsr32 dev_vendor;		/* 0x00 - device ID, vendor ID */
+	igcsr32 stat_cmd;		/* 0x04 - status, command */
+	igcsr32 class;			/* 0x08 - class code, rev ID */
+	igcsr32 latency;		/* 0x0C - header type, PCI latency */
+	igcsr32 bar0;			/* 0x10 - BAR0 - AGP */
+	igcsr32 bar1;			/* 0x14 - BAR1 - GART */
+	igcsr32 bar2;			/* 0x18 - Power Management reg block */
+
+	igcsr32 rsrvd0[6];		/* 0x1C-0x33 reserved */
+
+	igcsr32 capptr;			/* 0x34 - Capabilities pointer */
+
+	igcsr32 rsrvd1[2];		/* 0x38-0x3F reserved */
+
+	igcsr32 bacsr10;		/* 0x40 - base address chip selects */
+	igcsr32 bacsr32;		/* 0x44 - base address chip selects */
+	igcsr32 bacsr54_eccms761;	/* 0x48 - 751: base addr. chip selects
+						  761: ECC, mode/status */
+
+	igcsr32 rsrvd2[1];		/* 0x4C-0x4F reserved */
+
+	igcsr32 drammap;		/* 0x50 - address mapping control */
+	igcsr32 dramtm;			/* 0x54 - timing, driver strength */
+	igcsr32 dramms;			/* 0x58 - DRAM mode/status */
+
+	igcsr32 rsrvd3[1];		/* 0x5C-0x5F reserved */
+
+	igcsr32 biu0;			/* 0x60 - bus interface unit */
+	igcsr32 biusip;			/* 0x64 - Serial initialisation pkt */
+
+	igcsr32 rsrvd4[2];		/* 0x68-0x6F reserved */
+
+	igcsr32 mro;			/* 0x70 - memory request optimiser */
+
+	igcsr32 rsrvd5[3];		/* 0x74-0x7F reserved */
+
+	igcsr32 whami;			/* 0x80 - who am I */
+	igcsr32 pciarb;			/* 0x84 - PCI arbitration control */
+	igcsr32 pcicfg;			/* 0x88 - PCI config status */
+
+	igcsr32 rsrvd6[4];		/* 0x8C-0x9B reserved */
+
+	igcsr32 pci_mem;		/* 0x9C - PCI top of memory,
+						  761 only */
+
+	/* AGP (bus 1) control registers */
+	igcsr32 agpcap;			/* 0xA0 - AGP Capability Identifier */
+	igcsr32 agpstat;		/* 0xA4 - AGP status register */
+	igcsr32 agpcmd;			/* 0xA8 - AGP control register */
+	igcsr32 agpva;			/* 0xAC - AGP Virtual Address Space */
+	igcsr32 agpmode;		/* 0xB0 - AGP/GART mode control */
+} Irongate0;
+
+
+typedef struct {
+
+	igcsr32 dev_vendor;		/* 0x00 - Device and Vendor IDs */
+	igcsr32 stat_cmd;		/* 0x04 - Status and Command regs */
+	igcsr32 class;			/* 0x08 - subclass, baseclass etc */
+	igcsr32 htype;			/* 0x0C - header type (at 0x0E) */
+	igcsr32 rsrvd0[2];		/* 0x10-0x17 reserved */
+	igcsr32 busnos;			/* 0x18 - Primary, secondary bus nos */
+	igcsr32 io_baselim_regs;	/* 0x1C - IO base, IO lim, AGP status */
+	igcsr32	mem_baselim;		/* 0x20 - memory base, memory lim */
+	igcsr32 pfmem_baselim;		/* 0x24 - prefetchable base, lim */
+	igcsr32 rsrvd1[2];		/* 0x28-0x2F reserved */
+	igcsr32 io_baselim;		/* 0x30 - IO base, IO limit */
+	igcsr32 rsrvd2[2];		/* 0x34-0x3B - reserved */
+	igcsr32 interrupt;		/* 0x3C - interrupt, PCI bridge ctrl */
+
+} Irongate1;
+
+extern igcsr32 *IronECC;
+
+/*
+ * Memory spaces:
+ */
+
+/* Irongate is consistent with a subset of the Tsunami memory map */
+#ifdef USE_48_BIT_KSEG
+#define IRONGATE_BIAS 0x80000000000UL
+#else
+#define IRONGATE_BIAS 0x10000000000UL
+#endif
+
+
+#define IRONGATE_MEM		(IDENT_ADDR | IRONGATE_BIAS | 0x000000000UL)
+#define IRONGATE_IACK_SC	(IDENT_ADDR | IRONGATE_BIAS | 0x1F8000000UL)
+#define IRONGATE_IO		(IDENT_ADDR | IRONGATE_BIAS | 0x1FC000000UL)
+#define IRONGATE_CONF		(IDENT_ADDR | IRONGATE_BIAS | 0x1FE000000UL)
+
+/*
+ * PCI Configuration space accesses are formed like so:
+ *
+ * 0x1FE << 24 |  : 2 2 2 2 1 1 1 1 : 1 1 1 1 1 1 0 0 : 0 0 0 0 0 0 0 0 :
+ *                : 3 2 1 0 9 8 7 6 : 5 4 3 2 1 0 9 8 : 7 6 5 4 3 2 1 0 :
+ *                  ---bus numer---   -device-- -fun-   ---register----
+ */
+
+#define IGCSR(dev,fun,reg)	( IRONGATE_CONF | \
+				((dev)<<11) | \
+				((fun)<<8) | \
+				(reg) )
+
+#define IRONGATE0		((Irongate0 *) IGCSR(0, 0, 0))
+#define IRONGATE1		((Irongate1 *) IGCSR(1, 0, 0))
+
+/*
+ * Data structure for handling IRONGATE machine checks:
+ * This is the standard OSF logout frame
+ */
+
+#define SCB_Q_SYSERR	0x620			/* OSF definitions */
+#define SCB_Q_PROCERR	0x630
+#define SCB_Q_SYSMCHK	0x660
+#define SCB_Q_PROCMCHK	0x670
+
+struct el_IRONGATE_sysdata_mcheck {
+	__u32 FrameSize;                 /* Bytes, including this field */
+	__u32 FrameFlags;                /* <31> = Retry, <30> = Second Error */
+	__u32 CpuOffset;                 /* Offset to CPU-specific into */
+	__u32 SystemOffset;              /* Offset to system-specific info */
+	__u32 MCHK_Code;
+	__u32 MCHK_Frame_Rev;
+	__u64 I_STAT;
+	__u64 DC_STAT;
+	__u64 C_ADDR;
+	__u64 DC1_SYNDROME;
+	__u64 DC0_SYNDROME;
+	__u64 C_STAT;
+	__u64 C_STS;
+	__u64 RESERVED0;
+	__u64 EXC_ADDR;
+	__u64 IER_CM;
+	__u64 ISUM;
+	__u64 MM_STAT;
+	__u64 PAL_BASE;
+	__u64 I_CTL;
+	__u64 PCTX;
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * IRONGATE (AMD-751) PCI/memory support chip for the EV6 (21264) and
+ * K7 can only use linear accesses to get at PCI memory and I/O spaces.
+ */
+
+/*
+ * Memory functions.  All accesses are done through linear space.
+ */
+
+__EXTERN_INLINE void __iomem *irongate_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + IRONGATE_IO);
+}
+
+extern void __iomem *irongate_ioremap(unsigned long addr, unsigned long size);
+extern void irongate_iounmap(volatile void __iomem *addr);
+
+__EXTERN_INLINE int irongate_is_ioaddr(unsigned long addr)
+{
+	return addr >= IRONGATE_MEM;
+}
+
+__EXTERN_INLINE int irongate_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+	return addr < IRONGATE_IO || addr >= IRONGATE_CONF;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX			irongate
+#define irongate_trivial_rw_bw		1
+#define irongate_trivial_rw_lq		1
+#define irongate_trivial_io_bw		1
+#define irongate_trivial_io_lq		1
+#define irongate_trivial_iounmap	0
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_IRONGATE__H__ */
diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h
new file mode 100644
index 00000000000..f7cb4b46095
--- /dev/null
+++ b/arch/alpha/include/asm/core_lca.h
@@ -0,0 +1,361 @@
+#ifndef __ALPHA_LCA__H__
+#define __ALPHA_LCA__H__
+
+#include <asm/system.h>
+#include <asm/compiler.h>
+
+/*
+ * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
+ * for example).
+ *
+ * This file is based on:
+ *
+ *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
+ *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
+ *	Maynard, MA; Order Number: EC-N2681-71.
+ */
+
+/*
+ * NOTE: The LCA uses a Host Address Extension (HAE) register to access
+ *	 PCI addresses that are beyond the first 27 bits of address
+ *	 space.  Updating the HAE requires an external cycle (and
+ *	 a memory barrier), which tends to be slow.  Instead of updating
+ *	 it on each sparse memory access, we keep the current HAE value
+ *	 cached in variable cache_hae.  Only if the cached HAE differs
+ *	 from the desired HAE value do we actually updated HAE register.
+ *	 The HAE register is preserved by the interrupt handler entry/exit
+ *	 code, so this scheme works even in the presence of interrupts.
+ *
+ * Dense memory space doesn't require the HAE, but is restricted to
+ * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
+ * Acknowledge cycles may also require the use of the HAE.  The LCA
+ * limits I/O address space to the bottom 24 bits of address space,
+ * but this easily covers the 16 bit ISA I/O address space.
+ */
+
+/*
+ * NOTE 2! The memory operations do not set any memory barriers, as
+ * it's not needed for cases like a frame buffer that is essentially
+ * memory-like.  You need to do them by hand if the operations depend
+ * on ordering.
+ *
+ * Similarly, the port I/O operations do a "mb" only after a write
+ * operation: if an mb is needed before (as in the case of doing
+ * memory mapped I/O first, and then a port I/O operation to the same
+ * device), it needs to be done by hand.
+ *
+ * After the above has bitten me 100 times, I'll give up and just do
+ * the mb all the time, but right now I'm hoping this will work out.
+ * Avoiding mb's may potentially be a noticeable speed improvement,
+ * but I can't honestly say I've tested it.
+ *
+ * Handling interrupts that need to do mb's to synchronize to
+ * non-interrupts is another fun race area.  Don't do it (because if
+ * you do, I'll have to do *everything* with interrupts disabled,
+ * ugh).
+ */
+
+/*
+ * Memory Controller registers:
+ */
+#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
+#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
+#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
+#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
+#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
+#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
+#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
+#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
+#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
+#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
+#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
+#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
+#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
+#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
+#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
+#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
+#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
+#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
+#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)
+
+/*
+ * I/O Controller registers:
+ */
+#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
+#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
+#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
+#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
+#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
+#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
+#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
+#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
+#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
+#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
+#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
+#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
+#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
+#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
+#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
+#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
+#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
+#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
+#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
+#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
+#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
+#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)
+
+/*
+ * Memory spaces:
+ */
+#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
+#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
+#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
+#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
+#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)
+
+/*
+ * Bit definitions for I/O Controller status register 0:
+ */
+#define LCA_IOC_STAT0_CMD		0xf
+#define LCA_IOC_STAT0_ERR		(1<<4)
+#define LCA_IOC_STAT0_LOST		(1<<5)
+#define LCA_IOC_STAT0_THIT		(1<<6)
+#define LCA_IOC_STAT0_TREF		(1<<7)
+#define LCA_IOC_STAT0_CODE_SHIFT	8
+#define LCA_IOC_STAT0_CODE_MASK		0x7
+#define LCA_IOC_STAT0_P_NBR_SHIFT	13
+#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff
+
+#define LCA_HAE_ADDRESS		LCA_IOC_HAE
+
+/* LCA PMR Power Management register defines */
+#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
+#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
+#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
+#define LCA_PMR_INTO    0x40                    /* Interrupt override */
+#define LCA_PMR_DMAO    0x80                    /* DMA override */
+#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
+#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
+#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L
+
+/* LCA PMR Macros */
+
+#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
+#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
+
+#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
+#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
+#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
+
+/* LCA PMR Divisor values */
+#define LCA_PMR_DIV_1   0x0
+#define LCA_PMR_DIV_1_5 0x1
+#define LCA_PMR_DIV_2   0x2
+#define LCA_PMR_DIV_4   0x3
+#define LCA_PMR_DIV_8   0x4
+#define LCA_PMR_DIV_16  0x5
+#define LCA_PMR_DIV_MIN DIV_1
+#define LCA_PMR_DIV_MAX DIV_16
+
+
+/*
+ * Data structure for handling LCA machine checks.  Correctable errors
+ * result in a short logout frame, uncorrectable ones in a long one.
+ */
+struct el_lca_mcheck_short {
+	struct el_common	h;		/* common logout header */
+	unsigned long		esr;		/* error-status register */
+	unsigned long		ear;		/* error-address register */
+	unsigned long		dc_stat;	/* dcache status register */
+	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
+	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
+};
+
+struct el_lca_mcheck_long {
+	struct el_common	h;		/* common logout header */
+	unsigned long		pt[31];		/* PAL temps */
+	unsigned long		exc_addr;	/* exception address */
+	unsigned long		pad1[3];
+	unsigned long		pal_base;	/* PALcode base address */
+	unsigned long		hier;		/* hw interrupt enable */
+	unsigned long		hirr;		/* hw interrupt request */
+	unsigned long		mm_csr;		/* MMU control & status */
+	unsigned long		dc_stat;	/* data cache status */
+	unsigned long		dc_addr;	/* data cache addr register */
+	unsigned long		abox_ctl;	/* address box control register */
+	unsigned long		esr;		/* error status register */
+	unsigned long		ear;		/* error address register */
+	unsigned long		car;		/* cache control register */
+	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
+	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
+	unsigned long		va;		/* virtual address register */
+};
+
+union el_lca {
+	struct el_common *		c;
+	struct el_lca_mcheck_long *	l;
+	struct el_lca_mcheck_short *	s;
+};
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * Unlike Jensen, the Noname machines have no concept of local
+ * I/O---everything goes over the PCI bus.
+ *
+ * There is plenty room for optimization here.  In particular,
+ * the Alpha's insb/insw/extb/extw should be useful in moving
+ * data to/from the right byte-lanes.
+ */
+
+#define vip	volatile int __force *
+#define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
+
+#define LCA_SET_HAE						\
+	do {							\
+		if (addr >= (1UL << 24)) {			\
+			unsigned long msb = addr & 0xf8000000;	\
+			addr -= msb;				\
+			set_hae(msb);				\
+		}						\
+	} while (0)
+
+
+__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= LCA_DENSE_MEM) {
+		addr -= LCA_DENSE_MEM;
+		LCA_SET_HAE;
+		base_and_type = LCA_SPARSE_MEM + 0x00;
+	} else {
+		addr -= LCA_IO;
+		base_and_type = LCA_IO + 0x00;
+	}
+
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= LCA_DENSE_MEM) {
+		addr -= LCA_DENSE_MEM;
+		LCA_SET_HAE;
+		base_and_type = LCA_SPARSE_MEM + 0x00;
+	} else {
+		addr -= LCA_IO;
+		base_and_type = LCA_IO + 0x00;
+	}
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long result, base_and_type;
+
+	if (addr >= LCA_DENSE_MEM) {
+		addr -= LCA_DENSE_MEM;
+		LCA_SET_HAE;
+		base_and_type = LCA_SPARSE_MEM + 0x08;
+	} else {
+		addr -= LCA_IO;
+		base_and_type = LCA_IO + 0x08;
+	}
+
+	result = *(vip) ((addr << 5) + base_and_type);
+	return __kernel_extwl(result, addr & 3);
+}
+
+__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long w, base_and_type;
+
+	if (addr >= LCA_DENSE_MEM) {
+		addr -= LCA_DENSE_MEM;
+		LCA_SET_HAE;
+		base_and_type = LCA_SPARSE_MEM + 0x08;
+	} else {
+		addr -= LCA_IO;
+		base_and_type = LCA_IO + 0x08;
+	}
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + base_and_type) = w;
+}
+
+__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < LCA_DENSE_MEM)
+		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
+	return *(vuip)addr;
+}
+
+__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < LCA_DENSE_MEM)
+		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
+	*(vuip)addr = b;
+}
+
+__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + LCA_IO);
+}
+
+__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
+					  unsigned long size)
+{
+	return (void __iomem *)(addr + LCA_DENSE_MEM);
+}
+
+__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
+{
+	return addr >= IDENT_ADDR + 0x120000000UL;
+}
+
+__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= LCA_DENSE_MEM;
+}
+
+#undef vip
+#undef vuip
+#undef vulp
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		lca
+#define lca_trivial_rw_bw	2
+#define lca_trivial_rw_lq	1
+#define lca_trivial_io_bw	0
+#define lca_trivial_io_lq	0
+#define lca_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_LCA__H__ */
diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
new file mode 100644
index 00000000000..30d55fe7aaf
--- /dev/null
+++ b/arch/alpha/include/asm/core_marvel.h
@@ -0,0 +1,378 @@
+/*
+ * Marvel systems use the IO7 I/O chip provides PCI/PCIX/AGP access
+ *
+ * This file is based on:
+ *
+ * Marvel / EV7 System Programmer's Manual
+ * Revision 1.00
+ * 14 May 2001
+ */
+
+#ifndef __ALPHA_MARVEL__H__
+#define __ALPHA_MARVEL__H__
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/compiler.h>
+
+#define MARVEL_MAX_PIDS		 32 /* as long as we rely on 43-bit superpage */
+#define MARVEL_IRQ_VEC_PE_SHIFT	(10)
+#define MARVEL_IRQ_VEC_IRQ_MASK	((1 << MARVEL_IRQ_VEC_PE_SHIFT) - 1)
+#define MARVEL_NR_IRQS		\
+	(16 + (MARVEL_MAX_PIDS * (1 << MARVEL_IRQ_VEC_PE_SHIFT)))
+
+/*
+ * EV7 RBOX Registers
+ */
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(16)));
+} ev7_csr;
+
+typedef struct {
+	ev7_csr	RBOX_CFG;		/* 0x0000 */
+	ev7_csr	RBOX_NSVC;
+	ev7_csr	RBOX_EWVC;
+	ev7_csr	RBOX_WHAMI;
+	ev7_csr	RBOX_TCTL;		/* 0x0040 */
+	ev7_csr	RBOX_INT;
+	ev7_csr	RBOX_IMASK;
+	ev7_csr	RBOX_IREQ;
+	ev7_csr	RBOX_INTQ;		/* 0x0080 */
+	ev7_csr	RBOX_INTA;
+	ev7_csr	RBOX_IT;
+	ev7_csr	RBOX_SCRATCH1;
+	ev7_csr	RBOX_SCRATCH2;		/* 0x00c0 */
+	ev7_csr	RBOX_L_ERR;
+} ev7_csrs;
+
+/*
+ * EV7 CSR addressing macros
+ */
+#define EV7_MASK40(addr)        ((addr) & ((1UL << 41) - 1))
+#define EV7_KERN_ADDR(addr)	((void *)(IDENT_ADDR | EV7_MASK40(addr)))
+
+#define EV7_PE_MASK		0x1ffUL /* 9 bits ( 256 + mem/io ) */
+#define EV7_IPE(pe)		((~((long)(pe)) & EV7_PE_MASK) << 35)
+
+#define EV7_CSR_PHYS(pe, off)	(EV7_IPE(pe) | (0x7FFCUL << 20) | (off))
+#define EV7_CSRS_PHYS(pe)	(EV7_CSR_PHYS(pe, 0UL))
+
+#define EV7_CSR_KERN(pe, off)	(EV7_KERN_ADDR(EV7_CSR_PHYS(pe, off)))
+#define EV7_CSRS_KERN(pe)	(EV7_KERN_ADDR(EV7_CSRS_PHYS(pe)))
+
+#define EV7_CSR_OFFSET(name)	((unsigned long)&((ev7_csrs *)NULL)->name.csr)
+
+/*
+ * IO7 registers
+ */
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(64)));
+} io7_csr;
+
+typedef struct {
+	/* I/O Port Control Registers */
+	io7_csr	POx_CTRL;	       	/* 0x0000 */
+	io7_csr	POx_CACHE_CTL;
+	io7_csr POx_TIMER;
+	io7_csr POx_IO_ADR_EXT;
+	io7_csr	POx_MEM_ADR_EXT;	/* 0x0100 */
+	io7_csr POx_XCAL_CTRL;
+	io7_csr rsvd1[2];	/* ?? spec doesn't show 0x180 */
+	io7_csr POx_DM_SOURCE;		/* 0x0200 */
+	io7_csr POx_DM_DEST;
+	io7_csr POx_DM_SIZE;
+	io7_csr POx_DM_CTRL;
+	io7_csr rsvd2[4];		/* 0x0300 */
+
+	/* AGP Control Registers -- port 3 only */
+	io7_csr AGP_CAP_ID;		/* 0x0400 */
+	io7_csr AGP_STAT;
+	io7_csr	AGP_CMD;
+	io7_csr	rsvd3;
+
+	/* I/O Port Monitor Registers */
+	io7_csr	POx_MONCTL;		/* 0x0500 */
+	io7_csr POx_CTRA;
+	io7_csr POx_CTRB;
+	io7_csr POx_CTR56;
+	io7_csr POx_SCRATCH;		/* 0x0600 */
+	io7_csr POx_XTRA_A;
+	io7_csr POx_XTRA_TS;
+	io7_csr POx_XTRA_Z;
+	io7_csr rsvd4;			/* 0x0700 */
+	io7_csr POx_THRESHA;
+	io7_csr POx_THRESHB;
+	io7_csr rsvd5[33];
+
+	/* System Address Space Window Control Registers */
+
+	io7_csr POx_WBASE[4];		/* 0x1000 */
+	io7_csr POx_WMASK[4];
+	io7_csr POx_TBASE[4];
+	io7_csr POx_SG_TBIA;
+	io7_csr POx_MSI_WBASE;
+	io7_csr rsvd6[50];
+
+	/* I/O Port Error Registers */
+	io7_csr POx_ERR_SUM;
+	io7_csr POx_FIRST_ERR;
+	io7_csr POx_MSK_HEI;
+	io7_csr POx_TLB_ERR;
+	io7_csr POx_SPL_COMPLT;
+	io7_csr POx_TRANS_SUM;
+	io7_csr POx_FRC_PCI_ERR;
+	io7_csr POx_MULT_ERR;
+	io7_csr rsvd7[8];
+
+	/* I/O Port End of Interrupt Registers */
+	io7_csr EOI_DAT;
+	io7_csr rsvd8[7];
+	io7_csr POx_IACK_SPECIAL;
+	io7_csr rsvd9[103];
+} io7_ioport_csrs;
+
+typedef struct {
+	io7_csr IO_ASIC_REV;		/* 0x30.0000 */
+	io7_csr IO_SYS_REV;
+	io7_csr SER_CHAIN3;
+	io7_csr PO7_RST1;
+	io7_csr PO7_RST2;		/* 0x30.0100 */
+	io7_csr POx_RST[4];
+	io7_csr IO7_DWNH;
+	io7_csr IO7_MAF;
+	io7_csr IO7_MAF_TO;
+	io7_csr IO7_ACC_CLUMP;		/* 0x30.0300 */
+	io7_csr IO7_PMASK;
+	io7_csr IO7_IOMASK;
+	io7_csr IO7_UPH;
+	io7_csr IO7_UPH_TO;		/* 0x30.0400 */
+	io7_csr RBX_IREQ_OFF;
+	io7_csr RBX_INTA_OFF;
+	io7_csr INT_RTY;
+	io7_csr PO7_MONCTL;		/* 0x30.0500 */
+	io7_csr PO7_CTRA;
+	io7_csr PO7_CTRB;
+	io7_csr PO7_CTR56;
+	io7_csr PO7_SCRATCH;		/* 0x30.0600 */
+	io7_csr PO7_XTRA_A;
+	io7_csr PO7_XTRA_TS;
+	io7_csr PO7_XTRA_Z;
+	io7_csr PO7_PMASK;		/* 0x30.0700 */
+	io7_csr PO7_THRESHA;
+	io7_csr PO7_THRESHB;
+	io7_csr rsvd1[97];
+	io7_csr PO7_ERROR_SUM;		/* 0x30.2000 */
+	io7_csr PO7_BHOLE_MASK;
+	io7_csr PO7_HEI_MSK;
+	io7_csr PO7_CRD_MSK;
+	io7_csr PO7_UNCRR_SYM;		/* 0x30.2100 */
+	io7_csr PO7_CRRCT_SYM;
+	io7_csr PO7_ERR_PKT[2];
+	io7_csr PO7_UGBGE_SYM;		/* 0x30.2200 */
+	io7_csr rsbv2[887];
+	io7_csr PO7_LSI_CTL[128];	/* 0x31.0000 */
+	io7_csr rsvd3[123];
+	io7_csr HLT_CTL;		/* 0x31.3ec0 */
+	io7_csr HPI_CTL;		/* 0x31.3f00 */
+	io7_csr CRD_CTL;
+	io7_csr STV_CTL;
+	io7_csr HEI_CTL;
+	io7_csr PO7_MSI_CTL[16];	/* 0x31.4000 */
+	io7_csr rsvd4[240];
+
+	/*
+	 * Interrupt Diagnostic / Test
+	 */
+	struct {
+		io7_csr INT_PND;
+		io7_csr INT_CLR;
+		io7_csr INT_EOI;
+		io7_csr rsvd[29];
+	} INT_DIAG[4];
+	io7_csr rsvd5[125];	    	/* 0x31.a000 */
+	io7_csr MISC_PND;		/* 0x31.b800 */
+	io7_csr rsvd6[31];
+	io7_csr MSI_PND[16];		/* 0x31.c000 */
+	io7_csr rsvd7[16];
+	io7_csr MSI_CLR[16];		/* 0x31.c800 */
+} io7_port7_csrs;
+
+/* 
+ * IO7 DMA Window Base register (POx_WBASEx)
+ */
+#define wbase_m_ena  0x1
+#define wbase_m_sg   0x2
+#define wbase_m_dac  0x4
+#define wbase_m_addr 0xFFF00000
+union IO7_POx_WBASE {
+	struct {
+		unsigned ena : 1;	/* <0>			*/
+		unsigned sg : 1;	/* <1>			*/
+		unsigned dac : 1;	/* <2> -- window 3 only */
+		unsigned rsvd1 : 17; 
+		unsigned addr : 12;	/* <31:20>		*/
+		unsigned rsvd2 : 32;
+	} bits;
+	unsigned as_long[2];
+	unsigned as_quad;
+};
+
+/*
+ * IO7 IID (Interrupt IDentifier) format
+ *
+ * For level-sensative interrupts, int_num is encoded as:
+ *
+ *	bus/port	slot/device	INTx
+ *	<7:5>		<4:2>		<1:0>
+ */
+union IO7_IID {
+	struct {
+		unsigned int_num : 9;		/* <8:0>    	*/
+		unsigned tpu_mask : 4;		/* <12:9> rsvd	*/
+		unsigned msi : 1;		/* 13		*/
+		unsigned ipe : 10;		/* <23:14>	*/
+		unsigned long rsvd : 40;		
+	} bits;
+	unsigned int as_long[2];
+	unsigned long as_quad;
+};
+
+/*
+ * IO7 addressing macros
+ */
+#define IO7_KERN_ADDR(addr)	(EV7_KERN_ADDR(addr))
+
+#define IO7_PORT_MASK	   	0x07UL	/* 3 bits of port 	   */
+
+#define IO7_IPE(pe)		(EV7_IPE(pe))
+#define IO7_IPORT(port)		((~((long)(port)) & IO7_PORT_MASK) << 32)
+
+#define IO7_HOSE(pe, port)	(IO7_IPE(pe) | IO7_IPORT(port))
+
+#define IO7_MEM_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0x00000000UL)
+#define IO7_CONF_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0xFE000000UL)
+#define IO7_IO_PHYS(pe, port)	(IO7_HOSE(pe, port) | 0xFF000000UL)
+#define IO7_CSR_PHYS(pe, port, off) \
+                                (IO7_HOSE(pe, port) | 0xFF800000UL | (off))
+#define IO7_CSRS_PHYS(pe, port)	(IO7_CSR_PHYS(pe, port, 0UL))
+#define IO7_PORT7_CSRS_PHYS(pe) (IO7_CSR_PHYS(pe, 7, 0x300000UL))
+
+#define IO7_MEM_KERN(pe, port)      (IO7_KERN_ADDR(IO7_MEM_PHYS(pe, port)))
+#define IO7_CONF_KERN(pe, port)     (IO7_KERN_ADDR(IO7_CONF_PHYS(pe, port)))
+#define IO7_IO_KERN(pe, port)       (IO7_KERN_ADDR(IO7_IO_PHYS(pe, port)))
+#define IO7_CSR_KERN(pe, port, off) (IO7_KERN_ADDR(IO7_CSR_PHYS(pe,port,off)))
+#define IO7_CSRS_KERN(pe, port)     (IO7_KERN_ADDR(IO7_CSRS_PHYS(pe, port)))
+#define IO7_PORT7_CSRS_KERN(pe)	    (IO7_KERN_ADDR(IO7_PORT7_CSRS_PHYS(pe)))
+
+#define IO7_PLL_RNGA(pll)	(((pll) >> 3) & 0x7)
+#define IO7_PLL_RNGB(pll)	(((pll) >> 6) & 0x7)
+
+#define IO7_MEM_SPACE		(2UL * 1024 * 1024 * 1024)	/* 2GB MEM */
+#define IO7_IO_SPACE		(8UL * 1024 * 1024)		/* 8MB I/O */
+
+ 
+/* 
+ * Offset between ram physical addresses and pci64 DAC addresses
+ */
+#define IO7_DAC_OFFSET		(1UL << 49)
+
+/*
+ * This is needed to satisify the IO() macro used in initializing the machvec
+ */
+#define MARVEL_IACK_SC 							\
+        ((unsigned long)						\
+	 (&(((io7_ioport_csrs *)IO7_CSRS_KERN(0, 0))->POx_IACK_SPECIAL)))
+
+#ifdef __KERNEL__
+
+/*
+ * IO7 structs
+ */
+#define IO7_NUM_PORTS 4
+#define IO7_AGP_PORT  3
+
+struct io7_port {
+	struct io7 *io7;
+	struct pci_controller *hose;
+
+	int enabled;
+	unsigned int port;
+	io7_ioport_csrs *csrs;
+
+	unsigned long saved_wbase[4];
+	unsigned long saved_wmask[4];
+	unsigned long saved_tbase[4];
+};
+
+struct io7 {
+	struct io7 *next;
+
+	unsigned int pe;
+	io7_port7_csrs *csrs;
+	struct io7_port ports[IO7_NUM_PORTS];
+
+	spinlock_t irq_lock;
+};
+
+#ifndef __EXTERN_INLINE
+# define __EXTERN_INLINE extern inline
+# define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions. All access through linear space.
+ */
+
+/*
+ * Memory functions.  All accesses through linear space.
+ */
+
+#define vucp	volatile unsigned char __force *
+#define vusp	volatile unsigned short __force *
+
+extern unsigned int marvel_ioread8(void __iomem *);
+extern void marvel_iowrite8(u8 b, void __iomem *);
+
+__EXTERN_INLINE unsigned int marvel_ioread16(void __iomem *addr)
+{
+	return __kernel_ldwu(*(vusp)addr);
+}
+
+__EXTERN_INLINE void marvel_iowrite16(u16 b, void __iomem *addr)
+{
+	__kernel_stw(b, *(vusp)addr);
+}
+
+extern void __iomem *marvel_ioremap(unsigned long addr, unsigned long size);
+extern void marvel_iounmap(volatile void __iomem *addr);
+extern void __iomem *marvel_ioportmap (unsigned long addr);
+
+__EXTERN_INLINE int marvel_is_ioaddr(unsigned long addr)
+{
+	return (addr >> 40) & 1;
+}
+
+extern int marvel_is_mmio(const volatile void __iomem *);
+
+#undef vucp
+#undef vusp
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		marvel
+#define marvel_trivial_rw_bw	1
+#define marvel_trivial_rw_lq	1
+#define marvel_trivial_io_bw	0
+#define marvel_trivial_io_lq	1
+#define marvel_trivial_iounmap	0
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+# undef __EXTERN_INLINE
+# undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_MARVEL__H__ */
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
new file mode 100644
index 00000000000..acf55b48347
--- /dev/null
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -0,0 +1,381 @@
+#ifndef __ALPHA_MCPCIA__H__
+#define __ALPHA_MCPCIA__H__
+
+/* Define to experiment with fitting everything into one 128MB HAE window.
+   One window per bus, that is.  */
+#define MCPCIA_ONE_HAE_WINDOW 1
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/compiler.h>
+
+/*
+ * MCPCIA is the internal name for a core logic chipset which provides
+ * PCI access for the RAWHIDE family of systems.
+ *
+ * This file is based on:
+ *
+ * RAWHIDE System Programmer's Manual
+ * 16-May-96
+ * Rev. 1.4
+ *
+ */
+
+/*------------------------------------------------------------------------**
+**                                                                        **
+**  I/O procedures                                                        **
+**                                                                        **
+**      inport[b|w|t|l], outport[b|w|t|l] 8:16:24:32 IO xfers             **
+**	inportbxt: 8 bits only                                            **
+**      inport:    alias of inportw                                       **
+**      outport:   alias of outportw                                      **
+**                                                                        **
+**      inmem[b|w|t|l], outmem[b|w|t|l] 8:16:24:32 ISA memory xfers       **
+**	inmembxt: 8 bits only                                             **
+**      inmem:    alias of inmemw                                         **
+**      outmem:   alias of outmemw                                        **
+**                                                                        **
+**------------------------------------------------------------------------*/
+
+
+/* MCPCIA ADDRESS BIT DEFINITIONS
+ *
+ *  3333 3333 3322 2222 2222 1111 1111 11
+ *  9876 5432 1098 7654 3210 9876 5432 1098 7654 3210
+ *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
+ *  1                                             000
+ *  ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
+ *  |                                             |\|
+ *  |                               Byte Enable --+ |
+ *  |                             Transfer Length --+
+ *  +-- IO space, not cached
+ *
+ *   Byte      Transfer
+ *   Enable    Length    Transfer  Byte    Address
+ *   adr<6:5>  adr<4:3>  Length    Enable  Adder
+ *   ---------------------------------------------
+ *      00        00      Byte      1110   0x000
+ *      01        00      Byte      1101   0x020
+ *      10        00      Byte      1011   0x040
+ *      11        00      Byte      0111   0x060
+ *
+ *      00        01      Word      1100   0x008
+ *      01        01      Word      1001   0x028 <= Not supported in this code.
+ *      10        01      Word      0011   0x048
+ *
+ *      00        10      Tribyte   1000   0x010
+ *      01        10      Tribyte   0001   0x030
+ *
+ *      10        11      Longword  0000   0x058
+ *
+ *      Note that byte enables are asserted low.
+ *
+ */
+
+#define MCPCIA_MAX_HOSES 4
+
+#define MCPCIA_MID(m)		((unsigned long)(m) << 33)
+
+/* Dodge has PCI0 and PCI1 at MID 4 and 5 respectively. 
+   Durango adds PCI2 and PCI3 at MID 6 and 7 respectively.  */
+#define MCPCIA_HOSE2MID(h)	((h) + 4)
+
+#define MCPCIA_MEM_MASK 0x07ffffff /* SPARSE Mem region mask is 27 bits */
+
+/*
+ * Memory spaces:
+ */
+#define MCPCIA_SPARSE(m)	(IDENT_ADDR + 0xf000000000UL + MCPCIA_MID(m))
+#define MCPCIA_DENSE(m)		(IDENT_ADDR + 0xf100000000UL + MCPCIA_MID(m))
+#define MCPCIA_IO(m)		(IDENT_ADDR + 0xf180000000UL + MCPCIA_MID(m))
+#define MCPCIA_CONF(m)		(IDENT_ADDR + 0xf1c0000000UL + MCPCIA_MID(m))
+#define MCPCIA_CSR(m)		(IDENT_ADDR + 0xf1e0000000UL + MCPCIA_MID(m))
+#define MCPCIA_IO_IACK(m)	(IDENT_ADDR + 0xf1f0000000UL + MCPCIA_MID(m))
+#define MCPCIA_DENSE_IO(m)	(IDENT_ADDR + 0xe1fc000000UL + MCPCIA_MID(m))
+#define MCPCIA_DENSE_CONF(m)	(IDENT_ADDR + 0xe1fe000000UL + MCPCIA_MID(m))
+
+/*
+ *  General Registers
+ */
+#define MCPCIA_REV(m)		(MCPCIA_CSR(m) + 0x000)
+#define MCPCIA_WHOAMI(m)	(MCPCIA_CSR(m) + 0x040)
+#define MCPCIA_PCI_LAT(m)	(MCPCIA_CSR(m) + 0x080)
+#define MCPCIA_CAP_CTRL(m)	(MCPCIA_CSR(m) + 0x100)
+#define MCPCIA_HAE_MEM(m)	(MCPCIA_CSR(m) + 0x400)
+#define MCPCIA_HAE_IO(m)	(MCPCIA_CSR(m) + 0x440)
+#define _MCPCIA_IACK_SC(m)	(MCPCIA_CSR(m) + 0x480)
+#define MCPCIA_HAE_DENSE(m)	(MCPCIA_CSR(m) + 0x4C0)
+
+/*
+ * Interrupt Control registers
+ */
+#define MCPCIA_INT_CTL(m)	(MCPCIA_CSR(m) + 0x500)
+#define MCPCIA_INT_REQ(m)	(MCPCIA_CSR(m) + 0x540)
+#define MCPCIA_INT_TARG(m)	(MCPCIA_CSR(m) + 0x580)
+#define MCPCIA_INT_ADR(m)	(MCPCIA_CSR(m) + 0x5C0)
+#define MCPCIA_INT_ADR_EXT(m)	(MCPCIA_CSR(m) + 0x600)
+#define MCPCIA_INT_MASK0(m)	(MCPCIA_CSR(m) + 0x640)
+#define MCPCIA_INT_MASK1(m)	(MCPCIA_CSR(m) + 0x680)
+#define MCPCIA_INT_ACK0(m)	(MCPCIA_CSR(m) + 0x10003f00)
+#define MCPCIA_INT_ACK1(m)	(MCPCIA_CSR(m) + 0x10003f40)
+
+/*
+ * Performance Monitor registers
+ */
+#define MCPCIA_PERF_MON(m)	(MCPCIA_CSR(m) + 0x300)
+#define MCPCIA_PERF_CONT(m)	(MCPCIA_CSR(m) + 0x340)
+
+/*
+ * Diagnostic Registers
+ */
+#define MCPCIA_CAP_DIAG(m)	(MCPCIA_CSR(m) + 0x700)
+#define MCPCIA_TOP_OF_MEM(m)	(MCPCIA_CSR(m) + 0x7C0)
+
+/*
+ * Error registers
+ */
+#define MCPCIA_MC_ERR0(m)	(MCPCIA_CSR(m) + 0x800)
+#define MCPCIA_MC_ERR1(m)	(MCPCIA_CSR(m) + 0x840)
+#define MCPCIA_CAP_ERR(m)	(MCPCIA_CSR(m) + 0x880)
+#define MCPCIA_PCI_ERR1(m)	(MCPCIA_CSR(m) + 0x1040)
+#define MCPCIA_MDPA_STAT(m)	(MCPCIA_CSR(m) + 0x4000)
+#define MCPCIA_MDPA_SYN(m)	(MCPCIA_CSR(m) + 0x4040)
+#define MCPCIA_MDPA_DIAG(m)	(MCPCIA_CSR(m) + 0x4080)
+#define MCPCIA_MDPB_STAT(m)	(MCPCIA_CSR(m) + 0x8000)
+#define MCPCIA_MDPB_SYN(m)	(MCPCIA_CSR(m) + 0x8040)
+#define MCPCIA_MDPB_DIAG(m)	(MCPCIA_CSR(m) + 0x8080)
+
+/*
+ * PCI Address Translation Registers.
+ */
+#define MCPCIA_SG_TBIA(m)	(MCPCIA_CSR(m) + 0x1300)
+#define MCPCIA_HBASE(m)		(MCPCIA_CSR(m) + 0x1340)
+
+#define MCPCIA_W0_BASE(m)	(MCPCIA_CSR(m) + 0x1400)
+#define MCPCIA_W0_MASK(m)	(MCPCIA_CSR(m) + 0x1440)
+#define MCPCIA_T0_BASE(m)	(MCPCIA_CSR(m) + 0x1480)
+
+#define MCPCIA_W1_BASE(m)	(MCPCIA_CSR(m) + 0x1500)
+#define MCPCIA_W1_MASK(m)	(MCPCIA_CSR(m) + 0x1540)
+#define MCPCIA_T1_BASE(m)	(MCPCIA_CSR(m) + 0x1580)
+
+#define MCPCIA_W2_BASE(m)	(MCPCIA_CSR(m) + 0x1600)
+#define MCPCIA_W2_MASK(m)	(MCPCIA_CSR(m) + 0x1640)
+#define MCPCIA_T2_BASE(m)	(MCPCIA_CSR(m) + 0x1680)
+
+#define MCPCIA_W3_BASE(m)	(MCPCIA_CSR(m) + 0x1700)
+#define MCPCIA_W3_MASK(m)	(MCPCIA_CSR(m) + 0x1740)
+#define MCPCIA_T3_BASE(m)	(MCPCIA_CSR(m) + 0x1780)
+
+/* Hack!  Only words for bus 0.  */
+
+#ifndef MCPCIA_ONE_HAE_WINDOW
+#define MCPCIA_HAE_ADDRESS	MCPCIA_HAE_MEM(4)
+#endif
+#define MCPCIA_IACK_SC		_MCPCIA_IACK_SC(4)
+
+/* 
+ * The canonical non-remaped I/O and MEM addresses have these values
+ * subtracted out.  This is arranged so that folks manipulating ISA
+ * devices can use their familiar numbers and have them map to bus 0.
+ */
+
+#define MCPCIA_IO_BIAS		MCPCIA_IO(4)
+#define MCPCIA_MEM_BIAS		MCPCIA_DENSE(4)
+
+/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
+#define MCPCIA_DAC_OFFSET	(1UL << 40)
+
+/*
+ * Data structure for handling MCPCIA machine checks:
+ */
+struct el_MCPCIA_uncorrected_frame_mcheck {
+	struct el_common header;
+	struct el_common_EV5_uncorrectable_mcheck procdata;
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * MCPCIA, the RAWHIDE family PCI/memory support chipset for the EV5 (21164)
+ * and EV56 (21164a) processors, can use either a sparse address mapping
+ * scheme, or the so-called byte-word PCI address space, to get at PCI memory
+ * and I/O.
+ *
+ * Unfortunately, we can't use BWIO with EV5, so for now, we always use SPARSE.
+ */
+
+/*
+ * Memory functions.  64-bit and 32-bit accesses are done through
+ * dense memory space, everything else through sparse space.
+ *
+ * For reading and writing 8 and 16 bit quantities we need to
+ * go through one of the three sparse address mapping regions
+ * and use the HAE_MEM CSR to provide some bits of the address.
+ * The following few routines use only sparse address region 1
+ * which gives 1Gbyte of accessible space which relates exactly
+ * to the amount of PCI memory mapping *into* system address space.
+ * See p 6-17 of the specification but it looks something like this:
+ *
+ * 21164 Address:
+ *
+ *          3         2         1
+ * 9876543210987654321098765432109876543210
+ * 1ZZZZ0.PCI.QW.Address............BBLL
+ *
+ * ZZ = SBZ
+ * BB = Byte offset
+ * LL = Transfer length
+ *
+ * PCI Address:
+ *
+ * 3         2         1
+ * 10987654321098765432109876543210
+ * HHH....PCI.QW.Address........ 00
+ *
+ * HHH = 31:29 HAE_MEM CSR
+ *
+ */
+
+#define vip	volatile int __force *
+#define vuip	volatile unsigned int __force *
+
+#ifdef MCPCIA_ONE_HAE_WINDOW
+#define MCPCIA_FROB_MMIO						\
+	if (__mcpcia_is_mmio(hose)) {					\
+		set_hae(hose & 0xffffffff);				\
+		hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4);	\
+	}
+#else
+#define MCPCIA_FROB_MMIO						\
+	if (__mcpcia_is_mmio(hose)) {					\
+		hose = hose - MCPCIA_DENSE(4) + MCPCIA_SPARSE(4);	\
+	}
+#endif
+
+extern inline int __mcpcia_is_mmio(unsigned long addr)
+{
+	return (addr & 0x80000000UL) == 0;
+}
+
+__EXTERN_INLINE unsigned int mcpcia_ioread8(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
+	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
+	unsigned long result;
+
+	MCPCIA_FROB_MMIO;
+
+	result = *(vip) ((addr << 5) + hose + 0x00);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
+	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
+	unsigned long w;
+
+	MCPCIA_FROB_MMIO;
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + hose + 0x00) = w;
+}
+
+__EXTERN_INLINE unsigned int mcpcia_ioread16(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
+	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
+	unsigned long result;
+
+	MCPCIA_FROB_MMIO;
+
+	result = *(vip) ((addr << 5) + hose + 0x08);
+	return __kernel_extwl(result, addr & 3);
+}
+
+__EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
+	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
+	unsigned long w;
+
+	MCPCIA_FROB_MMIO;
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + hose + 0x08) = w;
+}
+
+__EXTERN_INLINE unsigned int mcpcia_ioread32(void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	return *(vuip)addr;
+}
+
+__EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	*(vuip)addr = b;
+}
+
+
+__EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + MCPCIA_IO_BIAS);
+}
+
+__EXTERN_INLINE void __iomem *mcpcia_ioremap(unsigned long addr,
+					     unsigned long size)
+{
+	return (void __iomem *)(addr + MCPCIA_MEM_BIAS);
+}
+
+__EXTERN_INLINE int mcpcia_is_ioaddr(unsigned long addr)
+{
+	return addr >= MCPCIA_SPARSE(0);
+}
+
+__EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	return __mcpcia_is_mmio(addr);
+}
+
+#undef MCPCIA_FROB_MMIO
+
+#undef vip
+#undef vuip
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		mcpcia
+#define mcpcia_trivial_rw_bw	2
+#define mcpcia_trivial_rw_lq	1
+#define mcpcia_trivial_io_bw	0
+#define mcpcia_trivial_io_lq	0
+#define mcpcia_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_MCPCIA__H__ */
diff --git a/arch/alpha/include/asm/core_polaris.h b/arch/alpha/include/asm/core_polaris.h
new file mode 100644
index 00000000000..2f966b64659
--- /dev/null
+++ b/arch/alpha/include/asm/core_polaris.h
@@ -0,0 +1,110 @@
+#ifndef __ALPHA_POLARIS__H__
+#define __ALPHA_POLARIS__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+/*
+ * POLARIS is the internal name for a core logic chipset which provides
+ * memory controller and PCI access for the 21164PC chip based systems.
+ *
+ * This file is based on:
+ *
+ * Polaris System Controller
+ * Device Functional Specification
+ * 22-Jan-98
+ * Rev. 4.2
+ *
+ */
+
+/* Polaris memory regions */
+#define POLARIS_SPARSE_MEM_BASE		(IDENT_ADDR + 0xf800000000UL)
+#define POLARIS_DENSE_MEM_BASE		(IDENT_ADDR + 0xf900000000UL)
+#define POLARIS_SPARSE_IO_BASE		(IDENT_ADDR + 0xf980000000UL)
+#define POLARIS_SPARSE_CONFIG_BASE	(IDENT_ADDR + 0xf9c0000000UL)
+#define POLARIS_IACK_BASE		(IDENT_ADDR + 0xf9f8000000UL)
+#define POLARIS_DENSE_IO_BASE		(IDENT_ADDR + 0xf9fc000000UL)
+#define POLARIS_DENSE_CONFIG_BASE	(IDENT_ADDR + 0xf9fe000000UL)
+
+#define POLARIS_IACK_SC			POLARIS_IACK_BASE
+
+/* The Polaris command/status registers live in PCI Config space for
+ * bus 0/device 0.  As such, they may be bytes, words, or doublewords.
+ */
+#define POLARIS_W_VENID		(POLARIS_DENSE_CONFIG_BASE)
+#define POLARIS_W_DEVID		(POLARIS_DENSE_CONFIG_BASE+2)
+#define POLARIS_W_CMD		(POLARIS_DENSE_CONFIG_BASE+4)
+#define POLARIS_W_STATUS	(POLARIS_DENSE_CONFIG_BASE+6)
+
+/*
+ * Data structure for handling POLARIS machine checks:
+ */
+struct el_POLARIS_sysdata_mcheck {
+    u_long      psc_status;
+    u_long	psc_pcictl0;
+    u_long	psc_pcictl1;
+    u_long	psc_pcictl2;
+};
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * POLARIS, the PCI/memory support chipset for the PCA56 (21164PC)
+ * processors, can use either a sparse address  mapping scheme, or the 
+ * so-called byte-word PCI address space, to get at PCI memory and I/O.
+ *
+ * However, we will support only the BWX form.
+ */
+
+/*
+ * Memory functions.  Polaris allows all accesses (byte/word
+ * as well as long/quad) to be done through dense space.
+ *
+ * We will only support DENSE access via BWX insns.
+ */
+
+__EXTERN_INLINE void __iomem *polaris_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + POLARIS_DENSE_IO_BASE);
+}
+
+__EXTERN_INLINE void __iomem *polaris_ioremap(unsigned long addr,
+					      unsigned long size)
+{
+	return (void __iomem *)(addr + POLARIS_DENSE_MEM_BASE);
+}
+
+__EXTERN_INLINE int polaris_is_ioaddr(unsigned long addr)
+{
+	return addr >= POLARIS_SPARSE_MEM_BASE;
+}
+
+__EXTERN_INLINE int polaris_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr < POLARIS_SPARSE_IO_BASE;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		polaris
+#define polaris_trivial_rw_bw	1
+#define polaris_trivial_rw_lq	1
+#define polaris_trivial_io_bw	1
+#define polaris_trivial_io_lq	1
+#define polaris_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_POLARIS__H__ */
diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h
new file mode 100644
index 00000000000..46bfff58f67
--- /dev/null
+++ b/arch/alpha/include/asm/core_t2.h
@@ -0,0 +1,633 @@
+#ifndef __ALPHA_T2__H__
+#define __ALPHA_T2__H__
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/compiler.h>
+#include <asm/system.h>
+
+/*
+ * T2 is the internal name for the core logic chipset which provides
+ * memory controller and PCI access for the SABLE-based systems.
+ *
+ * This file is based on:
+ *
+ * SABLE I/O Specification
+ * Revision/Update Information: 1.3
+ *
+ * jestabro@amt.tay1.dec.com Initial Version.
+ *
+ */
+
+#define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 26 bits */
+
+/* GAMMA-SABLE is a SABLE with EV5-based CPUs */
+/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
+#define _GAMMA_BIAS		0x8000000000UL
+
+#if defined(CONFIG_ALPHA_GENERIC)
+#define GAMMA_BIAS		alpha_mv.sys.t2.gamma_bias
+#elif defined(CONFIG_ALPHA_GAMMA)
+#define GAMMA_BIAS		_GAMMA_BIAS
+#else
+#define GAMMA_BIAS		0
+#endif
+
+/*
+ * Memory spaces:
+ */
+#define T2_CONF		        (IDENT_ADDR + GAMMA_BIAS + 0x390000000UL)
+#define T2_IO			(IDENT_ADDR + GAMMA_BIAS + 0x3a0000000UL)
+#define T2_SPARSE_MEM		(IDENT_ADDR + GAMMA_BIAS + 0x200000000UL)
+#define T2_DENSE_MEM	        (IDENT_ADDR + GAMMA_BIAS + 0x3c0000000UL)
+
+#define T2_IOCSR		(IDENT_ADDR + GAMMA_BIAS + 0x38e000000UL)
+#define T2_CERR1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000020UL)
+#define T2_CERR2		(IDENT_ADDR + GAMMA_BIAS + 0x38e000040UL)
+#define T2_CERR3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000060UL)
+#define T2_PERR1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000080UL)
+#define T2_PERR2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0000a0UL)
+#define T2_PSCR			(IDENT_ADDR + GAMMA_BIAS + 0x38e0000c0UL)
+#define T2_HAE_1		(IDENT_ADDR + GAMMA_BIAS + 0x38e0000e0UL)
+#define T2_HAE_2		(IDENT_ADDR + GAMMA_BIAS + 0x38e000100UL)
+#define T2_HBASE		(IDENT_ADDR + GAMMA_BIAS + 0x38e000120UL)
+#define T2_WBASE1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000140UL)
+#define T2_WMASK1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000160UL)
+#define T2_TBASE1		(IDENT_ADDR + GAMMA_BIAS + 0x38e000180UL)
+#define T2_WBASE2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001a0UL)
+#define T2_WMASK2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001c0UL)
+#define T2_TBASE2		(IDENT_ADDR + GAMMA_BIAS + 0x38e0001e0UL)
+#define T2_TLBBR		(IDENT_ADDR + GAMMA_BIAS + 0x38e000200UL)
+#define T2_IVR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000220UL)
+#define T2_HAE_3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000240UL)
+#define T2_HAE_4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000260UL)
+
+/* The CSRs below are T3/T4 only */
+#define T2_WBASE3		(IDENT_ADDR + GAMMA_BIAS + 0x38e000280UL)
+#define T2_WMASK3		(IDENT_ADDR + GAMMA_BIAS + 0x38e0002a0UL)
+#define T2_TBASE3		(IDENT_ADDR + GAMMA_BIAS + 0x38e0002c0UL)
+
+#define T2_TDR0			(IDENT_ADDR + GAMMA_BIAS + 0x38e000300UL)
+#define T2_TDR1			(IDENT_ADDR + GAMMA_BIAS + 0x38e000320UL)
+#define T2_TDR2			(IDENT_ADDR + GAMMA_BIAS + 0x38e000340UL)
+#define T2_TDR3			(IDENT_ADDR + GAMMA_BIAS + 0x38e000360UL)
+#define T2_TDR4			(IDENT_ADDR + GAMMA_BIAS + 0x38e000380UL)
+#define T2_TDR5			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003a0UL)
+#define T2_TDR6			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003c0UL)
+#define T2_TDR7			(IDENT_ADDR + GAMMA_BIAS + 0x38e0003e0UL)
+
+#define T2_WBASE4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000400UL)
+#define T2_WMASK4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000420UL)
+#define T2_TBASE4		(IDENT_ADDR + GAMMA_BIAS + 0x38e000440UL)
+
+#define T2_AIR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000460UL)
+#define T2_VAR			(IDENT_ADDR + GAMMA_BIAS + 0x38e000480UL)
+#define T2_DIR			(IDENT_ADDR + GAMMA_BIAS + 0x38e0004a0UL)
+#define T2_ICE			(IDENT_ADDR + GAMMA_BIAS + 0x38e0004c0UL)
+
+#define T2_HAE_ADDRESS		T2_HAE_1
+
+/*  T2 CSRs are in the non-cachable primary IO space from 3.8000.0000 to
+ 3.8fff.ffff
+ *
+ *  +--------------+ 3 8000 0000
+ *  | CPU 0 CSRs   |
+ *  +--------------+ 3 8100 0000
+ *  | CPU 1 CSRs   |
+ *  +--------------+ 3 8200 0000
+ *  | CPU 2 CSRs   |
+ *  +--------------+ 3 8300 0000
+ *  | CPU 3 CSRs   |
+ *  +--------------+ 3 8400 0000
+ *  | CPU Reserved |
+ *  +--------------+ 3 8700 0000
+ *  | Mem Reserved |
+ *  +--------------+ 3 8800 0000
+ *  | Mem 0 CSRs   |
+ *  +--------------+ 3 8900 0000
+ *  | Mem 1 CSRs   |
+ *  +--------------+ 3 8a00 0000
+ *  | Mem 2 CSRs   |
+ *  +--------------+ 3 8b00 0000
+ *  | Mem 3 CSRs   |
+ *  +--------------+ 3 8c00 0000
+ *  | Mem Reserved |
+ *  +--------------+ 3 8e00 0000
+ *  | PCI Bridge   |
+ *  +--------------+ 3 8f00 0000
+ *  | Expansion IO |
+ *  +--------------+ 3 9000 0000
+ *
+ *
+ */
+#define T2_CPU0_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x380000000L)
+#define T2_CPU1_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x381000000L)
+#define T2_CPU2_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x382000000L)
+#define T2_CPU3_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x383000000L)
+
+#define T2_CPUn_BASE(n)		(T2_CPU0_BASE + (((n)&3) * 0x001000000L))
+
+#define T2_MEM0_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x388000000L)
+#define T2_MEM1_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x389000000L)
+#define T2_MEM2_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x38a000000L)
+#define T2_MEM3_BASE            (IDENT_ADDR + GAMMA_BIAS + 0x38b000000L)
+
+
+/*
+ * Sable CPU Module CSRS
+ *
+ * These are CSRs for hardware other than the CPU chip on the CPU module.
+ * The CPU module has Backup Cache control logic, Cbus control logic, and
+ * interrupt control logic on it.  There is a duplicate tag store to speed
+ * up maintaining cache coherency.
+ */
+
+struct sable_cpu_csr {
+  unsigned long bcc;     long fill_00[3]; /* Backup Cache Control */
+  unsigned long bcce;    long fill_01[3]; /* Backup Cache Correctable Error */
+  unsigned long bccea;   long fill_02[3]; /* B-Cache Corr Err Address Latch */
+  unsigned long bcue;    long fill_03[3]; /* B-Cache Uncorrectable Error */
+  unsigned long bcuea;   long fill_04[3]; /* B-Cache Uncorr Err Addr Latch */
+  unsigned long dter;    long fill_05[3]; /* Duplicate Tag Error */
+  unsigned long cbctl;   long fill_06[3]; /* CBus Control */
+  unsigned long cbe;     long fill_07[3]; /* CBus Error */
+  unsigned long cbeal;   long fill_08[3]; /* CBus Error Addr Latch low */
+  unsigned long cbeah;   long fill_09[3]; /* CBus Error Addr Latch high */
+  unsigned long pmbx;    long fill_10[3]; /* Processor Mailbox */
+  unsigned long ipir;    long fill_11[3]; /* Inter-Processor Int Request */
+  unsigned long sic;     long fill_12[3]; /* System Interrupt Clear */
+  unsigned long adlk;    long fill_13[3]; /* Address Lock (LDxL/STxC) */
+  unsigned long madrl;   long fill_14[3]; /* CBus Miss Address */
+  unsigned long rev;     long fill_15[3]; /* CMIC Revision */
+};
+
+/*
+ * Data structure for handling T2 machine checks:
+ */
+struct el_t2_frame_header {
+	unsigned int	elcf_fid;	/* Frame ID (from above) */
+	unsigned int	elcf_size;	/* Size of frame in bytes */
+};
+
+struct el_t2_procdata_mcheck {
+	unsigned long	elfmc_paltemp[32];	/* PAL TEMP REGS. */
+	/* EV4-specific fields */
+	unsigned long	elfmc_exc_addr;	/* Addr of excepting insn. */
+	unsigned long	elfmc_exc_sum;	/* Summary of arith traps. */
+	unsigned long	elfmc_exc_mask;	/* Exception mask (from exc_sum). */
+	unsigned long	elfmc_iccsr;	/* IBox hardware enables. */
+	unsigned long	elfmc_pal_base;	/* Base address for PALcode. */
+	unsigned long	elfmc_hier;	/* Hardware Interrupt Enable. */
+	unsigned long	elfmc_hirr;	/* Hardware Interrupt Request. */
+	unsigned long	elfmc_mm_csr;	/* D-stream fault info. */
+	unsigned long	elfmc_dc_stat;	/* D-cache status (ECC/Parity Err). */
+	unsigned long	elfmc_dc_addr;	/* EV3 Phys Addr for ECC/DPERR. */
+	unsigned long	elfmc_abox_ctl;	/* ABox Control Register. */
+	unsigned long	elfmc_biu_stat;	/* BIU Status. */
+	unsigned long	elfmc_biu_addr;	/* BUI Address. */
+	unsigned long	elfmc_biu_ctl;	/* BIU Control. */
+	unsigned long	elfmc_fill_syndrome; /* For correcting ECC errors. */
+	unsigned long	elfmc_fill_addr;/* Cache block which was being read. */
+	unsigned long	elfmc_va;	/* Effective VA of fault or miss. */
+	unsigned long	elfmc_bc_tag;	/* Backup Cache Tag Probe Results. */
+};
+
+/*
+ * Sable processor specific Machine Check Data segment.
+ */
+
+struct el_t2_logout_header {
+	unsigned int	elfl_size;	/* size in bytes of logout area. */
+	unsigned int	elfl_sbz1:31;	/* Should be zero. */
+	unsigned int	elfl_retry:1;	/* Retry flag. */
+	unsigned int	elfl_procoffset; /* Processor-specific offset. */
+	unsigned int	elfl_sysoffset;	 /* Offset of system-specific. */
+	unsigned int	elfl_error_type;	/* PAL error type code. */
+	unsigned int	elfl_frame_rev;		/* PAL Frame revision. */
+};
+struct el_t2_sysdata_mcheck {
+	unsigned long    elcmc_bcc;	      /* CSR 0 */
+	unsigned long    elcmc_bcce;	      /* CSR 1 */
+	unsigned long    elcmc_bccea;      /* CSR 2 */
+	unsigned long    elcmc_bcue;	      /* CSR 3 */
+	unsigned long    elcmc_bcuea;      /* CSR 4 */
+	unsigned long    elcmc_dter;	      /* CSR 5 */
+	unsigned long    elcmc_cbctl;      /* CSR 6 */
+	unsigned long    elcmc_cbe;	      /* CSR 7 */
+	unsigned long    elcmc_cbeal;      /* CSR 8 */
+	unsigned long    elcmc_cbeah;      /* CSR 9 */
+	unsigned long    elcmc_pmbx;	      /* CSR 10 */
+	unsigned long    elcmc_ipir;	      /* CSR 11 */
+	unsigned long    elcmc_sic;	      /* CSR 12 */
+	unsigned long    elcmc_adlk;	      /* CSR 13 */
+	unsigned long    elcmc_madrl;      /* CSR 14 */
+	unsigned long    elcmc_crrev4;     /* CSR 15 */
+};
+
+/*
+ * Sable memory error frame - sable pfms section 3.42
+ */
+struct el_t2_data_memory {
+	struct	el_t2_frame_header elcm_hdr;	/* ID$MEM-FERR = 0x08 */
+	unsigned int  elcm_module;	/* Module id. */
+	unsigned int  elcm_res04;	/* Reserved. */
+	unsigned long elcm_merr;	/* CSR0: Error Reg 1. */
+	unsigned long elcm_mcmd1;	/* CSR1: Command Trap 1. */
+	unsigned long elcm_mcmd2;	/* CSR2: Command Trap 2. */
+	unsigned long elcm_mconf;	/* CSR3: Configuration. */
+	unsigned long elcm_medc1;	/* CSR4: EDC Status 1. */
+	unsigned long elcm_medc2;	/* CSR5: EDC Status 2. */
+	unsigned long elcm_medcc;	/* CSR6: EDC Control. */
+	unsigned long elcm_msctl;	/* CSR7: Stream Buffer Control. */
+	unsigned long elcm_mref;	/* CSR8: Refresh Control. */
+	unsigned long elcm_filter;	/* CSR9: CRD Filter Control. */
+};
+
+
+/*
+ * Sable other CPU error frame - sable pfms section 3.43
+ */
+struct el_t2_data_other_cpu {
+	short	      elco_cpuid;	/* CPU ID */
+	short	      elco_res02[3];
+	unsigned long elco_bcc;	/* CSR 0 */
+	unsigned long elco_bcce;	/* CSR 1 */
+	unsigned long elco_bccea;	/* CSR 2 */
+	unsigned long elco_bcue;	/* CSR 3 */
+	unsigned long elco_bcuea;	/* CSR 4 */
+	unsigned long elco_dter;	/* CSR 5 */
+	unsigned long elco_cbctl;	/* CSR 6 */
+	unsigned long elco_cbe;	/* CSR 7 */
+	unsigned long elco_cbeal;	/* CSR 8 */
+	unsigned long elco_cbeah;	/* CSR 9 */
+	unsigned long elco_pmbx;	/* CSR 10 */
+	unsigned long elco_ipir;	/* CSR 11 */
+	unsigned long elco_sic;	/* CSR 12 */
+	unsigned long elco_adlk;	/* CSR 13 */
+	unsigned long elco_madrl;	/* CSR 14 */
+	unsigned long elco_crrev4;	/* CSR 15 */
+};
+
+/*
+ * Sable other CPU error frame - sable pfms section 3.44
+ */
+struct el_t2_data_t2{
+	struct el_t2_frame_header elct_hdr;	/* ID$T2-FRAME */
+	unsigned long elct_iocsr;	/* IO Control and Status Register */
+	unsigned long elct_cerr1;	/* Cbus Error Register 1 */
+	unsigned long elct_cerr2;	/* Cbus Error Register 2 */
+	unsigned long elct_cerr3;	/* Cbus Error Register 3 */
+	unsigned long elct_perr1;	/* PCI Error Register 1 */
+	unsigned long elct_perr2;	/* PCI Error Register 2 */
+	unsigned long elct_hae0_1;	/* High Address Extension Register 1 */
+	unsigned long elct_hae0_2;	/* High Address Extension Register 2 */
+	unsigned long elct_hbase;	/* High Base Register */
+	unsigned long elct_wbase1;	/* Window Base Register 1 */
+	unsigned long elct_wmask1;	/* Window Mask Register 1 */
+	unsigned long elct_tbase1;	/* Translated Base Register 1 */
+	unsigned long elct_wbase2;	/* Window Base Register 2 */
+	unsigned long elct_wmask2;	/* Window Mask Register 2 */
+	unsigned long elct_tbase2;	/* Translated Base Register 2 */
+	unsigned long elct_tdr0;	/* TLB Data Register 0 */
+	unsigned long elct_tdr1;	/* TLB Data Register 1 */
+	unsigned long elct_tdr2;	/* TLB Data Register 2 */
+	unsigned long elct_tdr3;	/* TLB Data Register 3 */
+	unsigned long elct_tdr4;	/* TLB Data Register 4 */
+	unsigned long elct_tdr5;	/* TLB Data Register 5 */
+	unsigned long elct_tdr6;	/* TLB Data Register 6 */
+	unsigned long elct_tdr7;	/* TLB Data Register 7 */
+};
+
+/*
+ * Sable error log data structure - sable pfms section 3.40
+ */
+struct el_t2_data_corrected {
+	unsigned long elcpb_biu_stat;
+	unsigned long elcpb_biu_addr;
+	unsigned long elcpb_biu_ctl;
+	unsigned long elcpb_fill_syndrome;
+	unsigned long elcpb_fill_addr;
+	unsigned long elcpb_bc_tag;
+};
+
+/*
+ * Sable error log data structure
+ * Note there are 4 memory slots on sable (see t2.h)
+ */
+struct el_t2_frame_mcheck {
+	struct el_t2_frame_header elfmc_header;	/* ID$P-FRAME_MCHECK */
+	struct el_t2_logout_header elfmc_hdr;
+	struct el_t2_procdata_mcheck elfmc_procdata;
+	struct el_t2_sysdata_mcheck elfmc_sysdata;
+	struct el_t2_data_t2 elfmc_t2data;
+	struct el_t2_data_memory elfmc_memdata[4];
+	struct el_t2_frame_header elfmc_footer;	/* empty */
+};
+
+
+/*
+ * Sable error log data structures on memory errors
+ */
+struct el_t2_frame_corrected {
+	struct el_t2_frame_header elfcc_header;	/* ID$P-BC-COR */
+	struct el_t2_logout_header elfcc_hdr;
+	struct el_t2_data_corrected elfcc_procdata;
+/*	struct el_t2_data_t2 elfcc_t2data;		*/
+/*	struct el_t2_data_memory elfcc_memdata[4];	*/
+	struct el_t2_frame_header elfcc_footer;	/* empty */
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * T2 (the core logic PCI/memory support chipset for the SABLE
+ * series of processors uses a sparse address mapping scheme to
+ * get at PCI memory and I/O.
+ */
+
+#define vip	volatile int *
+#define vuip	volatile unsigned int *
+
+extern inline u8 t2_inb(unsigned long addr)
+{
+	long result = *(vip) ((addr << 5) + T2_IO + 0x00);
+	return __kernel_extbl(result, addr & 3);
+}
+
+extern inline void t2_outb(u8 b, unsigned long addr)
+{
+	unsigned long w;
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + T2_IO + 0x00) = w;
+	mb();
+}
+
+extern inline u16 t2_inw(unsigned long addr)
+{
+	long result = *(vip) ((addr << 5) + T2_IO + 0x08);
+	return __kernel_extwl(result, addr & 3);
+}
+
+extern inline void t2_outw(u16 b, unsigned long addr)
+{
+	unsigned long w;
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + T2_IO + 0x08) = w;
+	mb();
+}
+
+extern inline u32 t2_inl(unsigned long addr)
+{
+	return *(vuip) ((addr << 5) + T2_IO + 0x18);
+}
+
+extern inline void t2_outl(u32 b, unsigned long addr)
+{
+	*(vuip) ((addr << 5) + T2_IO + 0x18) = b;
+	mb();
+}
+
+
+/*
+ * Memory functions.
+ *
+ * For reading and writing 8 and 16 bit quantities we need to
+ * go through one of the three sparse address mapping regions
+ * and use the HAE_MEM CSR to provide some bits of the address.
+ * The following few routines use only sparse address region 1
+ * which gives 1Gbyte of accessible space which relates exactly
+ * to the amount of PCI memory mapping *into* system address space.
+ * See p 6-17 of the specification but it looks something like this:
+ *
+ * 21164 Address:
+ *
+ *          3         2         1
+ * 9876543210987654321098765432109876543210
+ * 1ZZZZ0.PCI.QW.Address............BBLL
+ *
+ * ZZ = SBZ
+ * BB = Byte offset
+ * LL = Transfer length
+ *
+ * PCI Address:
+ *
+ * 3         2         1
+ * 10987654321098765432109876543210
+ * HHH....PCI.QW.Address........ 00
+ *
+ * HHH = 31:29 HAE_MEM CSR
+ *
+ */
+
+#define t2_set_hae { \
+	msb = addr  >> 27; \
+	addr &= T2_MEM_R1_MASK; \
+	set_hae(msb); \
+}
+
+extern spinlock_t t2_hae_lock;
+
+/*
+ * NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since
+ *       they may be called directly, rather than through the
+ *       ioreadNN/iowriteNN routines.
+ */
+
+__EXTERN_INLINE u8 t2_readb(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
+	unsigned long result, msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	result = *(vip) ((addr << 5) + T2_SPARSE_MEM + 0x00);
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+	return __kernel_extbl(result, addr & 3);
+}
+
+__EXTERN_INLINE u16 t2_readw(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
+	unsigned long result, msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08);
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+	return __kernel_extwl(result, addr & 3);
+}
+
+/*
+ * On SABLE with T2, we must use SPARSE memory even for 32-bit access,
+ * because we cannot access all of DENSE without changing its HAE.
+ */
+__EXTERN_INLINE u32 t2_readl(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
+	unsigned long result, msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18);
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+	return result & 0xffffffffUL;
+}
+
+__EXTERN_INLINE u64 t2_readq(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
+	unsigned long r0, r1, work, msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	work = (addr << 5) + T2_SPARSE_MEM + 0x18;
+	r0 = *(vuip)(work);
+	r1 = *(vuip)(work + (4 << 5));
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+	return r1 << 32 | r0;
+}
+
+__EXTERN_INLINE void t2_writeb(u8 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
+	unsigned long msb, w;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	w = __kernel_insbl(b, addr & 3);
+	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x00) = w;
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+}
+
+__EXTERN_INLINE void t2_writew(u16 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
+	unsigned long msb, w;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	w = __kernel_inswl(b, addr & 3);
+	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08) = w;
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+}
+
+/*
+ * On SABLE with T2, we must use SPARSE memory even for 32-bit access,
+ * because we cannot access all of DENSE without changing its HAE.
+ */
+__EXTERN_INLINE void t2_writel(u32 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
+	unsigned long msb;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18) = b;
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+}
+
+__EXTERN_INLINE void t2_writeq(u64 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
+	unsigned long msb, work;
+	unsigned long flags;
+	spin_lock_irqsave(&t2_hae_lock, flags);
+
+	t2_set_hae;
+
+	work = (addr << 5) + T2_SPARSE_MEM + 0x18;
+	*(vuip)work = b;
+	*(vuip)(work + (4 << 5)) = b >> 32;
+	spin_unlock_irqrestore(&t2_hae_lock, flags);
+}
+
+__EXTERN_INLINE void __iomem *t2_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + T2_IO);
+}
+
+__EXTERN_INLINE void __iomem *t2_ioremap(unsigned long addr, 
+					 unsigned long size)
+{
+	return (void __iomem *)(addr + T2_DENSE_MEM);
+}
+
+__EXTERN_INLINE int t2_is_ioaddr(unsigned long addr)
+{
+	return (long)addr >= 0;
+}
+
+__EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= T2_DENSE_MEM;
+}
+
+/* New-style ioread interface.  The mmio routines are so ugly for T2 that
+   it doesn't make sense to merge the pio and mmio routines.  */
+
+#define IOPORT(OS, NS)							\
+__EXTERN_INLINE unsigned int t2_ioread##NS(void __iomem *xaddr)		\
+{									\
+	if (t2_is_mmio(xaddr))						\
+		return t2_read##OS(xaddr);				\
+	else								\
+		return t2_in##OS((unsigned long)xaddr - T2_IO);		\
+}									\
+__EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr)	\
+{									\
+	if (t2_is_mmio(xaddr))						\
+		t2_write##OS(b, xaddr);					\
+	else								\
+		t2_out##OS(b, (unsigned long)xaddr - T2_IO);		\
+}
+
+IOPORT(b, 8)
+IOPORT(w, 16)
+IOPORT(l, 32)
+
+#undef IOPORT
+
+#undef vip
+#undef vuip
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		t2
+#define t2_trivial_rw_bw	0
+#define t2_trivial_rw_lq	0
+#define t2_trivial_io_bw	0
+#define t2_trivial_io_lq	0
+#define t2_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_T2__H__ */
diff --git a/arch/alpha/include/asm/core_titan.h b/arch/alpha/include/asm/core_titan.h
new file mode 100644
index 00000000000..a17f6f33b68
--- /dev/null
+++ b/arch/alpha/include/asm/core_titan.h
@@ -0,0 +1,410 @@
+#ifndef __ALPHA_TITAN__H__
+#define __ALPHA_TITAN__H__
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/compiler.h>
+
+/*
+ * TITAN is the internal names for a core logic chipset which provides
+ * memory controller and PCI/AGP access for 21264 based systems.
+ *
+ * This file is based on:
+ *
+ * Titan Chipset Engineering Specification
+ * Revision 0.12
+ * 13 July 1999
+ *
+ */
+
+/* XXX: Do we need to conditionalize on this?  */
+#ifdef USE_48_BIT_KSEG
+#define TI_BIAS 0x80000000000UL
+#else
+#define TI_BIAS 0x10000000000UL
+#endif
+
+/*
+ * CChip, DChip, and PChip registers
+ */
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(64)));
+} titan_64;
+
+typedef struct {
+	titan_64	csc;
+	titan_64	mtr;
+	titan_64	misc;
+	titan_64	mpd;
+	titan_64	aar0;
+	titan_64	aar1;
+	titan_64	aar2;
+	titan_64	aar3;
+	titan_64	dim0;
+	titan_64	dim1;
+	titan_64	dir0;
+	titan_64	dir1;
+	titan_64	drir;
+	titan_64	prben;
+	titan_64	iic0;
+	titan_64	iic1;
+	titan_64	mpr0;
+	titan_64	mpr1;
+	titan_64	mpr2;
+	titan_64	mpr3;
+	titan_64	rsvd[2];
+	titan_64	ttr;
+	titan_64	tdr;
+	titan_64	dim2;
+	titan_64	dim3;
+	titan_64	dir2;
+	titan_64	dir3;
+	titan_64	iic2;
+	titan_64	iic3;
+	titan_64	pwr;
+	titan_64	reserved[17];
+	titan_64	cmonctla;
+	titan_64	cmonctlb;
+	titan_64	cmoncnt01;
+	titan_64	cmoncnt23;
+	titan_64	cpen;
+} titan_cchip;
+
+typedef struct {
+	titan_64	dsc;
+	titan_64	str;
+	titan_64	drev;
+	titan_64	dsc2;
+} titan_dchip;
+
+typedef struct {
+	titan_64	wsba[4];
+	titan_64	wsm[4];
+	titan_64	tba[4];
+	titan_64	pctl;
+	titan_64	plat;
+	titan_64	reserved0[2];
+	union {
+		struct {
+			titan_64	serror;
+			titan_64	serren;
+			titan_64	serrset;
+			titan_64	reserved0;
+			titan_64	gperror;
+			titan_64	gperren;
+			titan_64	gperrset;
+			titan_64	reserved1;
+			titan_64	gtlbiv;
+			titan_64	gtlbia;
+			titan_64	reserved2[2];
+			titan_64	sctl;
+			titan_64	reserved3[3];
+		} g;
+		struct {
+			titan_64	agperror;
+			titan_64	agperren;
+			titan_64	agperrset;
+			titan_64	agplastwr;
+			titan_64	aperror;
+			titan_64	aperren;
+			titan_64	aperrset;
+			titan_64	reserved0;
+			titan_64	atlbiv;
+			titan_64	atlbia;
+			titan_64	reserved1[6];
+		} a;
+	} port_specific;
+	titan_64	sprst;
+	titan_64	reserved1[31];
+} titan_pachip_port;
+
+typedef struct {
+	titan_pachip_port	g_port;
+	titan_pachip_port	a_port;
+} titan_pachip;
+
+#define TITAN_cchip	((titan_cchip  *)(IDENT_ADDR+TI_BIAS+0x1A0000000UL))
+#define TITAN_dchip    	((titan_dchip  *)(IDENT_ADDR+TI_BIAS+0x1B0000800UL))
+#define TITAN_pachip0 	((titan_pachip *)(IDENT_ADDR+TI_BIAS+0x180000000UL))
+#define TITAN_pachip1 	((titan_pachip *)(IDENT_ADDR+TI_BIAS+0x380000000UL))
+extern unsigned TITAN_agp;
+extern int TITAN_bootcpu;
+
+/*
+ * TITAN PA-chip Window Space Base Address register.
+ * (WSBA[0-2])
+ */
+#define wsba_m_ena 0x1                
+#define wsba_m_sg 0x2
+#define wsba_m_addr 0xFFF00000  
+#define wmask_k_sz1gb 0x3FF00000                   
+union TPAchipWSBA {
+	struct  {
+		unsigned wsba_v_ena : 1;
+		unsigned wsba_v_sg : 1;
+		unsigned wsba_v_rsvd1 : 18;
+		unsigned wsba_v_addr : 12;
+		unsigned wsba_v_rsvd2 : 32;
+        } wsba_r_bits;
+	int wsba_q_whole [2];
+};
+
+/*
+ * TITAN PA-chip Control Register
+ * This definition covers both the G-Port GPCTL and the A-PORT APCTL.
+ * Bits <51:0> are the same in both cases. APCTL<63:52> are only 
+ * applicable to AGP.
+ */
+#define pctl_m_fbtb 			0x00000001
+#define pctl_m_thdis 			0x00000002
+#define pctl_m_chaindis 		0x00000004
+#define pctl_m_tgtlat 			0x00000018
+#define pctl_m_hole  	  		0x00000020
+#define pctl_m_mwin 	  		0x00000040
+#define pctl_m_arbena 	  		0x00000080
+#define pctl_m_prigrp 	  		0x0000FF00
+#define pctl_m_ppri 	  		0x00010000
+#define pctl_m_pcispd66  		0x00020000
+#define pctl_m_cngstlt	  		0x003C0000
+#define pctl_m_ptpdesten 		0x3FC00000
+#define pctl_m_dpcen			0x40000000
+#define pctl_m_apcen		0x0000000080000000UL
+#define pctl_m_dcrtv		0x0000000300000000UL
+#define pctl_m_en_stepping	0x0000000400000000UL
+#define apctl_m_rsvd1		0x000FFFF800000000UL
+#define apctl_m_agp_rate	0x0030000000000000UL
+#define apctl_m_agp_sba_en	0x0040000000000000UL
+#define apctl_m_agp_en		0x0080000000000000UL
+#define apctl_m_rsvd2		0x0100000000000000UL
+#define apctl_m_agp_present	0x0200000000000000UL
+#define apctl_agp_hp_rd		0x1C00000000000000UL
+#define apctl_agp_lp_rd		0xE000000000000000UL
+#define gpctl_m_rsvd		0xFFFFFFF800000000UL
+union TPAchipPCTL {
+	struct {
+		unsigned pctl_v_fbtb : 1;		/* A/G [0]     */
+		unsigned pctl_v_thdis : 1;		/* A/G [1]     */
+		unsigned pctl_v_chaindis : 1;		/* A/G [2]     */
+		unsigned pctl_v_tgtlat : 2;		/* A/G [4:3]   */
+		unsigned pctl_v_hole : 1;		/* A/G [5]     */
+		unsigned pctl_v_mwin : 1;		/* A/G [6]     */
+		unsigned pctl_v_arbena : 1;		/* A/G [7]     */
+		unsigned pctl_v_prigrp : 8;		/* A/G [15:8]  */
+		unsigned pctl_v_ppri : 1;		/* A/G [16]    */
+		unsigned pctl_v_pcispd66 : 1;		/* A/G [17]    */
+		unsigned pctl_v_cngstlt : 4;		/* A/G [21:18] */
+		unsigned pctl_v_ptpdesten : 8;		/* A/G [29:22] */
+		unsigned pctl_v_dpcen : 1;		/* A/G [30]    */
+		unsigned pctl_v_apcen : 1;		/* A/G [31]    */
+		unsigned pctl_v_dcrtv : 2;		/* A/G [33:32] */
+		unsigned pctl_v_en_stepping :1;		/* A/G [34]    */
+		unsigned apctl_v_rsvd1 : 17;		/* A   [51:35] */
+		unsigned apctl_v_agp_rate : 2;		/* A   [53:52] */
+		unsigned apctl_v_agp_sba_en : 1;	/* A   [54]    */
+		unsigned apctl_v_agp_en : 1;		/* A   [55]    */
+		unsigned apctl_v_rsvd2 : 1;		/* A   [56]    */
+		unsigned apctl_v_agp_present : 1;	/* A   [57]    */
+		unsigned apctl_v_agp_hp_rd : 3;		/* A   [60:58] */
+		unsigned apctl_v_agp_lp_rd : 3;		/* A   [63:61] */
+	} pctl_r_bits;
+	unsigned int pctl_l_whole [2];
+	unsigned long pctl_q_whole;
+};
+
+/*
+ * SERROR / SERREN / SERRSET
+ */
+union TPAchipSERR {
+	struct {
+		unsigned serr_v_lost_uecc : 1;		/* [0]		*/
+		unsigned serr_v_uecc : 1;		/* [1]  	*/
+		unsigned serr_v_cre : 1;		/* [2]		*/
+		unsigned serr_v_nxio : 1;		/* [3]		*/
+		unsigned serr_v_lost_cre : 1;		/* [4]		*/
+		unsigned serr_v_rsvd0 : 10;		/* [14:5]	*/
+		unsigned serr_v_addr : 32;		/* [46:15]	*/
+		unsigned serr_v_rsvd1 : 5;		/* [51:47]	*/
+		unsigned serr_v_source : 2;		/* [53:52]	*/
+		unsigned serr_v_cmd : 2;		/* [55:54]	*/
+		unsigned serr_v_syn : 8;		/* [63:56]	*/
+	} serr_r_bits;
+	unsigned int serr_l_whole[2];
+	unsigned long serr_q_whole;
+};
+
+/*
+ * GPERROR / APERROR / GPERREN / APERREN / GPERRSET / APERRSET
+ */
+union TPAchipPERR {
+	struct {
+		unsigned long perr_v_lost : 1;	     	/* [0]		*/
+		unsigned long perr_v_serr : 1;		/* [1]		*/
+		unsigned long perr_v_perr : 1;		/* [2]		*/
+		unsigned long perr_v_dcrto : 1;		/* [3]		*/
+		unsigned long perr_v_sge : 1;		/* [4]		*/
+		unsigned long perr_v_ape : 1;		/* [5]		*/
+		unsigned long perr_v_ta : 1;		/* [6]		*/
+		unsigned long perr_v_dpe : 1;		/* [7]		*/
+		unsigned long perr_v_nds : 1;		/* [8]		*/
+		unsigned long perr_v_iptpr : 1;		/* [9]		*/
+		unsigned long perr_v_iptpw : 1;		/* [10] 	*/
+		unsigned long perr_v_rsvd0 : 3;		/* [13:11]	*/
+		unsigned long perr_v_addr : 33;		/* [46:14]	*/
+		unsigned long perr_v_dac : 1;		/* [47]		*/
+		unsigned long perr_v_mwin : 1;		/* [48]		*/
+		unsigned long perr_v_rsvd1 : 3;		/* [51:49]	*/
+		unsigned long perr_v_cmd : 4;		/* [55:52]	*/
+		unsigned long perr_v_rsvd2 : 8;		/* [63:56]	*/
+	} perr_r_bits;
+	unsigned int perr_l_whole[2];
+	unsigned long perr_q_whole;
+};
+
+/*
+ * AGPERROR / AGPERREN / AGPERRSET
+ */
+union TPAchipAGPERR {
+	struct {
+		unsigned agperr_v_lost : 1;		/* [0]		*/
+		unsigned agperr_v_lpqfull : 1;		/* [1]		*/
+		unsigned apgerr_v_hpqfull : 1;		/* [2]		*/
+		unsigned agperr_v_rescmd : 1;		/* [3]		*/
+		unsigned agperr_v_ipte : 1;		/* [4]		*/
+		unsigned agperr_v_ptp :	1;      	/* [5]		*/
+		unsigned agperr_v_nowindow : 1;		/* [6]		*/
+		unsigned agperr_v_rsvd0 : 8;		/* [14:7]	*/
+		unsigned agperr_v_addr : 32;		/* [46:15]	*/
+		unsigned agperr_v_rsvd1 : 1;		/* [47]		*/
+		unsigned agperr_v_dac : 1;		/* [48]		*/
+		unsigned agperr_v_mwin : 1;		/* [49]		*/
+		unsigned agperr_v_cmd : 3;		/* [52:50]	*/
+		unsigned agperr_v_length : 6;		/* [58:53]	*/
+		unsigned agperr_v_fence : 1;		/* [59]		*/
+		unsigned agperr_v_rsvd2 : 4;		/* [63:60]	*/
+	} agperr_r_bits;
+	unsigned int agperr_l_whole[2];
+	unsigned long agperr_q_whole;
+};
+/*
+ * Memory spaces:
+ * Hose numbers are assigned as follows:
+ *		0 - pachip 0 / G Port
+ *		1 - pachip 1 / G Port
+ * 		2 - pachip 0 / A Port
+ *      	3 - pachip 1 / A Port
+ */
+#define TITAN_HOSE_SHIFT       (33) 
+#define TITAN_HOSE(h)		(((unsigned long)(h)) << TITAN_HOSE_SHIFT)
+#define TITAN_BASE		(IDENT_ADDR + TI_BIAS)
+#define TITAN_MEM(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x000000000UL)
+#define _TITAN_IACK_SC(h)    	(TITAN_BASE+TITAN_HOSE(h)+0x1F8000000UL)
+#define TITAN_IO(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x1FC000000UL)
+#define TITAN_CONF(h)	     	(TITAN_BASE+TITAN_HOSE(h)+0x1FE000000UL)
+
+#define TITAN_HOSE_MASK		TITAN_HOSE(3)
+#define TITAN_IACK_SC	     	_TITAN_IACK_SC(0) /* hack! */
+
+/* 
+ * The canonical non-remaped I/O and MEM addresses have these values
+ * subtracted out.  This is arranged so that folks manipulating ISA
+ * devices can use their familiar numbers and have them map to bus 0.
+ */
+
+#define TITAN_IO_BIAS		TITAN_IO(0)
+#define TITAN_MEM_BIAS		TITAN_MEM(0)
+
+/* The IO address space is larger than 0xffff */
+#define TITAN_IO_SPACE		(TITAN_CONF(0) - TITAN_IO(0))
+
+/* TIG Space */
+#define TITAN_TIG_SPACE		(TITAN_BASE + 0x100000000UL)
+
+/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
+/* ??? Just a guess.  Ought to confirm it hasn't been moved.  */
+#define TITAN_DAC_OFFSET	(1UL << 40)
+
+/*
+ * Data structure for handling TITAN machine checks:
+ */
+#define SCB_Q_SYSERR	0x620
+#define SCB_Q_PROCERR	0x630
+#define SCB_Q_SYSMCHK	0x660
+#define SCB_Q_PROCMCHK	0x670
+#define SCB_Q_SYSEVENT	0x680	/* environmental / system management */
+struct el_TITAN_sysdata_mcheck {
+	u64 summary;	/* 0x00 */
+	u64 c_dirx;	/* 0x08 */
+	u64 c_misc;	/* 0x10 */
+	u64 p0_serror;	/* 0x18 */
+	u64 p0_gperror; /* 0x20 */
+	u64 p0_aperror; /* 0x28 */
+	u64 p0_agperror;/* 0x30 */
+	u64 p1_serror;	/* 0x38 */
+	u64 p1_gperror; /* 0x40 */
+	u64 p1_aperror; /* 0x48 */
+	u64 p1_agperror;/* 0x50 */
+};
+
+/*
+ * System area for a privateer 680 environmental/system management mcheck 
+ */
+struct el_PRIVATEER_envdata_mcheck {
+	u64 summary;	/* 0x00 */
+	u64 c_dirx;	/* 0x08 */
+	u64 smir;	/* 0x10 */
+	u64 cpuir;	/* 0x18 */
+	u64 psir;	/* 0x20 */
+	u64 fault;	/* 0x28 */
+	u64 sys_doors;	/* 0x30 */
+	u64 temp_warn;	/* 0x38 */
+	u64 fan_ctrl;	/* 0x40 */
+	u64 code;	/* 0x48 */
+	u64 reserved;	/* 0x50 */
+};
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * TITAN, a 21??? PCI/memory support chipset for the EV6 (21264)
+ * can only use linear accesses to get at PCI/AGP memory and I/O spaces.
+ */
+
+/*
+ * Memory functions.  all accesses are done through linear space.
+ */
+extern void __iomem *titan_ioportmap(unsigned long addr);
+extern void __iomem *titan_ioremap(unsigned long addr, unsigned long size);
+extern void titan_iounmap(volatile void __iomem *addr);
+
+__EXTERN_INLINE int titan_is_ioaddr(unsigned long addr)
+{
+	return addr >= TITAN_BASE;
+}
+
+extern int titan_is_mmio(const volatile void __iomem *addr);
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		titan
+#define titan_trivial_rw_bw	1
+#define titan_trivial_rw_lq	1
+#define titan_trivial_io_bw	1
+#define titan_trivial_io_lq	1
+#define titan_trivial_iounmap	0
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_TITAN__H__ */
diff --git a/arch/alpha/include/asm/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h
new file mode 100644
index 00000000000..58d4fe48742
--- /dev/null
+++ b/arch/alpha/include/asm/core_tsunami.h
@@ -0,0 +1,335 @@
+#ifndef __ALPHA_TSUNAMI__H__
+#define __ALPHA_TSUNAMI__H__
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/compiler.h>
+
+/*
+ * TSUNAMI/TYPHOON are the internal names for the core logic chipset which
+ * provides memory controller and PCI access for the 21264 based systems.
+ *
+ * This file is based on:
+ *
+ * Tsunami System Programmers Manual
+ * Preliminary, Chapters 2-5
+ *
+ */
+
+/* XXX: Do we need to conditionalize on this?  */
+#ifdef USE_48_BIT_KSEG
+#define TS_BIAS 0x80000000000UL
+#else
+#define TS_BIAS 0x10000000000UL
+#endif
+
+/*
+ * CChip, DChip, and PChip registers
+ */
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(64)));
+} tsunami_64;
+
+typedef struct {
+	tsunami_64	csc;
+	tsunami_64	mtr;
+	tsunami_64	misc;
+	tsunami_64	mpd;
+	tsunami_64	aar0;
+	tsunami_64	aar1;
+	tsunami_64	aar2;
+	tsunami_64	aar3;
+	tsunami_64	dim0;
+	tsunami_64	dim1;
+	tsunami_64	dir0;
+	tsunami_64	dir1;
+	tsunami_64	drir;
+	tsunami_64	prben;
+	tsunami_64	iic;	/* a.k.a. iic0 */
+	tsunami_64	wdr;	/* a.k.a. iic1 */
+	tsunami_64	mpr0;
+	tsunami_64	mpr1;
+	tsunami_64	mpr2;
+	tsunami_64	mpr3;
+	tsunami_64	mctl;
+	tsunami_64	__pad1;
+	tsunami_64	ttr;
+	tsunami_64	tdr;
+	tsunami_64	dim2;
+	tsunami_64	dim3;
+	tsunami_64	dir2;
+	tsunami_64	dir3;
+	tsunami_64	iic2;
+	tsunami_64	iic3;
+} tsunami_cchip;
+
+typedef struct {
+	tsunami_64	dsc;
+	tsunami_64	str;
+	tsunami_64	drev;
+} tsunami_dchip;
+
+typedef struct {
+	tsunami_64	wsba[4];
+	tsunami_64	wsm[4];
+	tsunami_64	tba[4];
+	tsunami_64	pctl;
+	tsunami_64	plat;
+	tsunami_64	reserved;
+	tsunami_64	perror;
+	tsunami_64	perrmask;
+	tsunami_64	perrset;
+	tsunami_64	tlbiv;
+	tsunami_64	tlbia;
+	tsunami_64	pmonctl;
+	tsunami_64	pmoncnt;
+} tsunami_pchip;
+
+#define TSUNAMI_cchip  ((tsunami_cchip *)(IDENT_ADDR+TS_BIAS+0x1A0000000UL))
+#define TSUNAMI_dchip  ((tsunami_dchip *)(IDENT_ADDR+TS_BIAS+0x1B0000800UL))
+#define TSUNAMI_pchip0 ((tsunami_pchip *)(IDENT_ADDR+TS_BIAS+0x180000000UL))
+#define TSUNAMI_pchip1 ((tsunami_pchip *)(IDENT_ADDR+TS_BIAS+0x380000000UL))
+extern int TSUNAMI_bootcpu;
+
+/*
+ * TSUNAMI Pchip Error register.
+ */
+
+#define perror_m_lost 0x1
+#define perror_m_serr 0x2
+#define perror_m_perr 0x4
+#define perror_m_dcrto 0x8
+#define perror_m_sge 0x10
+#define perror_m_ape 0x20
+#define perror_m_ta 0x40
+#define perror_m_rdpe 0x80
+#define perror_m_nds 0x100
+#define perror_m_rto 0x200
+#define perror_m_uecc 0x400
+#define perror_m_cre 0x800
+#define perror_m_addrl 0xFFFFFFFF0000UL
+#define perror_m_addrh 0x7000000000000UL
+#define perror_m_cmd 0xF0000000000000UL
+#define perror_m_syn 0xFF00000000000000UL
+union TPchipPERROR {   
+	struct  {
+		unsigned int perror_v_lost : 1;
+		unsigned perror_v_serr : 1;
+		unsigned perror_v_perr : 1;
+		unsigned perror_v_dcrto : 1;
+		unsigned perror_v_sge : 1;
+		unsigned perror_v_ape : 1;
+		unsigned perror_v_ta : 1;
+		unsigned perror_v_rdpe : 1;
+		unsigned perror_v_nds : 1;
+		unsigned perror_v_rto : 1;
+		unsigned perror_v_uecc : 1;
+		unsigned perror_v_cre : 1;                 
+		unsigned perror_v_rsvd1 : 4;
+		unsigned perror_v_addrl : 32;
+		unsigned perror_v_addrh : 3;
+		unsigned perror_v_rsvd2 : 1;
+		unsigned perror_v_cmd : 4;
+		unsigned perror_v_syn : 8;
+	} perror_r_bits;
+	int perror_q_whole [2];
+};                       
+
+/*
+ * TSUNAMI Pchip Window Space Base Address register.
+ */
+#define wsba_m_ena 0x1                
+#define wsba_m_sg 0x2
+#define wsba_m_ptp 0x4
+#define wsba_m_addr 0xFFF00000  
+#define wmask_k_sz1gb 0x3FF00000                   
+union TPchipWSBA {
+	struct  {
+		unsigned wsba_v_ena : 1;
+		unsigned wsba_v_sg : 1;
+		unsigned wsba_v_ptp : 1;
+		unsigned wsba_v_rsvd1 : 17;
+		unsigned wsba_v_addr : 12;
+		unsigned wsba_v_rsvd2 : 32;
+	} wsba_r_bits;
+	int wsba_q_whole [2];
+};
+
+/*
+ * TSUNAMI Pchip Control Register
+ */
+#define pctl_m_fdsc 0x1
+#define pctl_m_fbtb 0x2
+#define pctl_m_thdis 0x4
+#define pctl_m_chaindis 0x8
+#define pctl_m_tgtlat 0x10
+#define pctl_m_hole 0x20
+#define pctl_m_mwin 0x40
+#define pctl_m_arbena 0x80
+#define pctl_m_prigrp 0x7F00
+#define pctl_m_ppri 0x8000
+#define pctl_m_rsvd1 0x30000
+#define pctl_m_eccen 0x40000
+#define pctl_m_padm 0x80000
+#define pctl_m_cdqmax 0xF00000
+#define pctl_m_rev 0xFF000000
+#define pctl_m_crqmax 0xF00000000UL
+#define pctl_m_ptpmax 0xF000000000UL
+#define pctl_m_pclkx 0x30000000000UL
+#define pctl_m_fdsdis 0x40000000000UL
+#define pctl_m_fdwdis 0x80000000000UL
+#define pctl_m_ptevrfy 0x100000000000UL
+#define pctl_m_rpp 0x200000000000UL
+#define pctl_m_pid 0xC00000000000UL
+#define pctl_m_rsvd2 0xFFFF000000000000UL
+
+union TPchipPCTL {
+	struct {
+		unsigned pctl_v_fdsc : 1;
+		unsigned pctl_v_fbtb : 1;
+		unsigned pctl_v_thdis : 1;
+		unsigned pctl_v_chaindis : 1;
+		unsigned pctl_v_tgtlat : 1;
+		unsigned pctl_v_hole : 1;
+		unsigned pctl_v_mwin : 1;
+		unsigned pctl_v_arbena : 1;
+		unsigned pctl_v_prigrp : 7;
+		unsigned pctl_v_ppri : 1;
+		unsigned pctl_v_rsvd1 : 2;
+		unsigned pctl_v_eccen : 1;
+		unsigned pctl_v_padm : 1;
+		unsigned pctl_v_cdqmax : 4;
+		unsigned pctl_v_rev : 8;
+		unsigned pctl_v_crqmax : 4;
+		unsigned pctl_v_ptpmax : 4;
+		unsigned pctl_v_pclkx : 2;
+		unsigned pctl_v_fdsdis : 1;
+		unsigned pctl_v_fdwdis : 1;
+		unsigned pctl_v_ptevrfy : 1;
+		unsigned pctl_v_rpp : 1;
+		unsigned pctl_v_pid : 2;
+		unsigned pctl_v_rsvd2 : 16;
+	} pctl_r_bits;
+	int pctl_q_whole [2];
+};
+
+/*
+ * TSUNAMI Pchip Error Mask Register.
+ */
+#define perrmask_m_lost 0x1
+#define perrmask_m_serr 0x2
+#define perrmask_m_perr 0x4
+#define perrmask_m_dcrto 0x8
+#define perrmask_m_sge 0x10
+#define perrmask_m_ape 0x20
+#define perrmask_m_ta 0x40
+#define perrmask_m_rdpe 0x80
+#define perrmask_m_nds 0x100
+#define perrmask_m_rto 0x200
+#define perrmask_m_uecc 0x400
+#define perrmask_m_cre 0x800
+#define perrmask_m_rsvd 0xFFFFFFFFFFFFF000UL
+union TPchipPERRMASK {   
+	struct  {
+		unsigned int perrmask_v_lost : 1;
+		unsigned perrmask_v_serr : 1;
+		unsigned perrmask_v_perr : 1;
+		unsigned perrmask_v_dcrto : 1;
+		unsigned perrmask_v_sge : 1;
+		unsigned perrmask_v_ape : 1;
+		unsigned perrmask_v_ta : 1;
+		unsigned perrmask_v_rdpe : 1;
+		unsigned perrmask_v_nds : 1;
+		unsigned perrmask_v_rto : 1;
+		unsigned perrmask_v_uecc : 1;
+		unsigned perrmask_v_cre : 1;                 
+		unsigned perrmask_v_rsvd1 : 20;
+		unsigned perrmask_v_rsvd2 : 32;
+	} perrmask_r_bits;
+	int perrmask_q_whole [2];
+};                       
+
+/*
+ * Memory spaces:
+ */
+#define TSUNAMI_HOSE(h)		(((unsigned long)(h)) << 33)
+#define TSUNAMI_BASE		(IDENT_ADDR + TS_BIAS)
+
+#define TSUNAMI_MEM(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x000000000UL)
+#define _TSUNAMI_IACK_SC(h)	(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1F8000000UL)
+#define TSUNAMI_IO(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1FC000000UL)
+#define TSUNAMI_CONF(h)		(TSUNAMI_BASE+TSUNAMI_HOSE(h) + 0x1FE000000UL)
+
+#define TSUNAMI_IACK_SC		_TSUNAMI_IACK_SC(0) /* hack! */
+
+
+/* 
+ * The canonical non-remaped I/O and MEM addresses have these values
+ * subtracted out.  This is arranged so that folks manipulating ISA
+ * devices can use their familiar numbers and have them map to bus 0.
+ */
+
+#define TSUNAMI_IO_BIAS          TSUNAMI_IO(0)
+#define TSUNAMI_MEM_BIAS         TSUNAMI_MEM(0)
+
+/* The IO address space is larger than 0xffff */
+#define TSUNAMI_IO_SPACE	(TSUNAMI_CONF(0) - TSUNAMI_IO(0))
+
+/* Offset between ram physical addresses and pci64 DAC bus addresses.  */
+#define TSUNAMI_DAC_OFFSET	(1UL << 40)
+
+/*
+ * Data structure for handling TSUNAMI machine checks:
+ */
+struct el_TSUNAMI_sysdata_mcheck {
+};
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * I/O functions:
+ *
+ * TSUNAMI, the 21??? PCI/memory support chipset for the EV6 (21264)
+ * can only use linear accesses to get at PCI memory and I/O spaces.
+ */
+
+/*
+ * Memory functions.  all accesses are done through linear space.
+ */
+extern void __iomem *tsunami_ioportmap(unsigned long addr);
+extern void __iomem *tsunami_ioremap(unsigned long addr, unsigned long size);
+__EXTERN_INLINE int tsunami_is_ioaddr(unsigned long addr)
+{
+	return addr >= TSUNAMI_BASE;
+}
+
+__EXTERN_INLINE int tsunami_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	return (addr & 0x100000000UL) == 0;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		tsunami
+#define tsunami_trivial_rw_bw	1
+#define tsunami_trivial_rw_lq	1
+#define tsunami_trivial_io_bw	1
+#define tsunami_trivial_io_lq	1
+#define tsunami_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_TSUNAMI__H__ */
diff --git a/arch/alpha/include/asm/core_wildfire.h b/arch/alpha/include/asm/core_wildfire.h
new file mode 100644
index 00000000000..cd562f544ba
--- /dev/null
+++ b/arch/alpha/include/asm/core_wildfire.h
@@ -0,0 +1,318 @@
+#ifndef __ALPHA_WILDFIRE__H__
+#define __ALPHA_WILDFIRE__H__
+
+#include <linux/types.h>
+#include <asm/compiler.h>
+
+#define WILDFIRE_MAX_QBB	8	/* more than 8 requires other mods */
+#define WILDFIRE_PCA_PER_QBB	4
+#define WILDFIRE_IRQ_PER_PCA	64
+
+#define WILDFIRE_NR_IRQS \
+  (WILDFIRE_MAX_QBB * WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA)
+
+extern unsigned char wildfire_hard_qbb_map[WILDFIRE_MAX_QBB];
+extern unsigned char wildfire_soft_qbb_map[WILDFIRE_MAX_QBB];
+#define QBB_MAP_EMPTY	0xff
+
+extern unsigned long wildfire_hard_qbb_mask;
+extern unsigned long wildfire_soft_qbb_mask;
+extern unsigned long wildfire_gp_mask;
+extern unsigned long wildfire_hs_mask;
+extern unsigned long wildfire_iop_mask;
+extern unsigned long wildfire_ior_mask;
+extern unsigned long wildfire_pca_mask;
+extern unsigned long wildfire_cpu_mask;
+extern unsigned long wildfire_mem_mask;
+
+#define WILDFIRE_QBB_EXISTS(qbbno) (wildfire_soft_qbb_mask & (1 << (qbbno)))
+
+#define WILDFIRE_MEM_EXISTS(qbbno) (wildfire_mem_mask & (0xf << ((qbbno) << 2)))
+
+#define WILDFIRE_PCA_EXISTS(qbbno, pcano) \
+		(wildfire_pca_mask & (1 << (((qbbno) << 2) + (pcano))))
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(64)));
+} wildfire_64;
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(256)));
+} wildfire_256;
+
+typedef struct {
+	volatile unsigned long csr __attribute__((aligned(2048)));
+} wildfire_2k;
+
+typedef struct {
+	wildfire_64	qsd_whami;
+	wildfire_64	qsd_rev;
+	wildfire_64	qsd_port_present;
+	wildfire_64	qsd_port_active;
+	wildfire_64	qsd_fault_ena;
+	wildfire_64	qsd_cpu_int_ena;
+	wildfire_64	qsd_mem_config;
+	wildfire_64	qsd_err_sum;
+	wildfire_64	ce_sum[4];
+	wildfire_64	dev_init[4];
+	wildfire_64	it_int[4];
+	wildfire_64	ip_int[4];
+	wildfire_64	uce_sum[4];
+	wildfire_64	se_sum__non_dev_int[4];
+	wildfire_64	scratch[4];
+	wildfire_64	qsd_timer;
+	wildfire_64	qsd_diag;
+} wildfire_qsd;
+
+typedef struct {
+	wildfire_256	qsd_whami;
+	wildfire_256	__pad1;
+	wildfire_256	ce_sum;
+	wildfire_256	dev_init;
+	wildfire_256	it_int;
+	wildfire_256	ip_int;
+	wildfire_256	uce_sum;
+	wildfire_256	se_sum;
+} wildfire_fast_qsd;
+
+typedef struct {
+	wildfire_2k	qsa_qbb_id;
+	wildfire_2k	__pad1;
+	wildfire_2k	qsa_port_ena;
+	wildfire_2k	qsa_scratch;
+	wildfire_2k	qsa_config[5];
+	wildfire_2k	qsa_ref_int;
+	wildfire_2k	qsa_qbb_pop[2];
+	wildfire_2k	qsa_dtag_fc;
+	wildfire_2k	__pad2[3];
+	wildfire_2k	qsa_diag;
+	wildfire_2k	qsa_diag_lock[4];
+	wildfire_2k	__pad3[11];
+	wildfire_2k	qsa_cpu_err_sum;
+	wildfire_2k	qsa_misc_err_sum;
+	wildfire_2k	qsa_tmo_err_sum;
+	wildfire_2k	qsa_err_ena;
+	wildfire_2k	qsa_tmo_config;
+	wildfire_2k	qsa_ill_cmd_err_sum;
+	wildfire_2k	__pad4[26];
+	wildfire_2k	qsa_busy_mask;
+	wildfire_2k	qsa_arr_valid;
+	wildfire_2k	__pad5[2];
+	wildfire_2k	qsa_port_map[4];
+	wildfire_2k	qsa_arr_addr[8];
+	wildfire_2k	qsa_arr_mask[8];
+} wildfire_qsa;
+
+typedef struct {
+	wildfire_64	ioa_config;
+	wildfire_64	iod_config;
+	wildfire_64	iop_switch_credits;
+	wildfire_64	__pad1;
+	wildfire_64	iop_hose_credits;
+	wildfire_64	__pad2[11];
+	struct {
+		wildfire_64	__pad3;
+		wildfire_64	init;
+	} iop_hose[4];
+	wildfire_64	ioa_hose_0_ctrl;
+	wildfire_64	iod_hose_0_ctrl;
+	wildfire_64	ioa_hose_1_ctrl;
+	wildfire_64	iod_hose_1_ctrl;
+	wildfire_64	ioa_hose_2_ctrl;
+	wildfire_64	iod_hose_2_ctrl;
+	wildfire_64	ioa_hose_3_ctrl;
+	wildfire_64	iod_hose_3_ctrl;
+	struct {
+		wildfire_64	target;
+		wildfire_64	__pad4;
+	} iop_dev_int[4];
+
+	wildfire_64	iop_err_int_target;
+	wildfire_64	__pad5[7];
+	wildfire_64	iop_qbb_err_sum;
+	wildfire_64	__pad6;
+	wildfire_64	iop_qbb_se_sum;
+	wildfire_64	__pad7;
+	wildfire_64	ioa_err_sum;
+	wildfire_64	iod_err_sum;
+	wildfire_64	__pad8[4];
+	wildfire_64	ioa_diag_force_err;
+	wildfire_64	iod_diag_force_err;
+	wildfire_64	__pad9[4];
+	wildfire_64	iop_diag_send_err_int;
+	wildfire_64	__pad10[15];
+	wildfire_64	ioa_scratch;
+	wildfire_64	iod_scratch;
+} wildfire_iop;
+
+typedef struct {
+	wildfire_2k	gpa_qbb_map[4];
+	wildfire_2k	gpa_mem_pop_map;
+	wildfire_2k	gpa_scratch;
+	wildfire_2k	gpa_diag;
+	wildfire_2k	gpa_config_0;
+	wildfire_2k	__pad1;
+	wildfire_2k	gpa_init_id;
+	wildfire_2k	gpa_config_2;
+	/* not complete */
+} wildfire_gp;
+
+typedef struct {
+	wildfire_64	pca_what_am_i;
+	wildfire_64	pca_err_sum;
+	wildfire_64	pca_diag_force_err;
+	wildfire_64	pca_diag_send_err_int;
+	wildfire_64	pca_hose_credits;
+	wildfire_64	pca_scratch;
+	wildfire_64	pca_micro_addr;
+	wildfire_64	pca_micro_data;
+	wildfire_64	pca_pend_int;
+	wildfire_64	pca_sent_int;
+	wildfire_64	__pad1;
+	wildfire_64	pca_stdio_edge_level;
+	wildfire_64	__pad2[52];
+	struct {
+		wildfire_64	target;
+		wildfire_64	enable;
+	} pca_int[4];
+	wildfire_64	__pad3[56];
+	wildfire_64	pca_alt_sent_int[32];
+} wildfire_pca;
+
+typedef struct {
+	wildfire_64	ne_what_am_i;
+	/* not complete */
+} wildfire_ne;
+
+typedef struct {
+	wildfire_64	fe_what_am_i;
+	/* not complete */
+} wildfire_fe;
+
+typedef struct {
+	wildfire_64	pci_io_addr_ext;
+	wildfire_64	pci_ctrl;
+	wildfire_64	pci_err_sum;
+	wildfire_64	pci_err_addr;
+	wildfire_64	pci_stall_cnt;
+	wildfire_64	pci_iack_special;
+	wildfire_64	__pad1[2];
+	wildfire_64	pci_pend_int;
+	wildfire_64	pci_sent_int;
+	wildfire_64	__pad2[54];
+	struct {
+		wildfire_64	wbase;
+		wildfire_64	wmask;
+		wildfire_64	tbase;
+	} pci_window[4];
+	wildfire_64	pci_flush_tlb;
+	wildfire_64	pci_perf_mon;
+} wildfire_pci;
+
+#define WILDFIRE_ENTITY_SHIFT		18
+
+#define WILDFIRE_GP_ENTITY		(0x10UL << WILDFIRE_ENTITY_SHIFT)
+#define WILDFIRE_IOP_ENTITY		(0x08UL << WILDFIRE_ENTITY_SHIFT)
+#define WILDFIRE_QSA_ENTITY		(0x04UL << WILDFIRE_ENTITY_SHIFT)
+#define WILDFIRE_QSD_ENTITY_SLOW	(0x05UL << WILDFIRE_ENTITY_SHIFT)
+#define WILDFIRE_QSD_ENTITY_FAST	(0x01UL << WILDFIRE_ENTITY_SHIFT)
+
+#define WILDFIRE_PCA_ENTITY(pca)	((0xc|(pca))<<WILDFIRE_ENTITY_SHIFT)
+
+#define WILDFIRE_BASE		(IDENT_ADDR | (1UL << 40))
+
+#define WILDFIRE_QBB_MASK	0x0fUL	/* for now, only 4 bits/16 QBBs */
+
+#define WILDFIRE_QBB(q)		((~((long)(q)) & WILDFIRE_QBB_MASK) << 36)
+#define WILDFIRE_HOSE(h)	((long)(h) << 33)
+
+#define WILDFIRE_QBB_IO(q)	(WILDFIRE_BASE | WILDFIRE_QBB(q))
+#define WILDFIRE_QBB_HOSE(q,h)	(WILDFIRE_QBB_IO(q) | WILDFIRE_HOSE(h))
+
+#define WILDFIRE_MEM(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x000000000UL)
+#define WILDFIRE_CONF(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x1FE000000UL)
+#define WILDFIRE_IO(q,h)	(WILDFIRE_QBB_HOSE(q,h) | 0x1FF000000UL)
+
+#define WILDFIRE_qsd(q) \
+ ((wildfire_qsd *)(WILDFIRE_QBB_IO(q)|WILDFIRE_QSD_ENTITY_SLOW|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_fast_qsd() \
+ ((wildfire_fast_qsd *)(WILDFIRE_QBB_IO(0)|WILDFIRE_QSD_ENTITY_FAST|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_qsa(q) \
+ ((wildfire_qsa *)(WILDFIRE_QBB_IO(q)|WILDFIRE_QSA_ENTITY|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_iop(q) \
+ ((wildfire_iop *)(WILDFIRE_QBB_IO(q)|WILDFIRE_IOP_ENTITY|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_gp(q) \
+ ((wildfire_gp *)(WILDFIRE_QBB_IO(q)|WILDFIRE_GP_ENTITY|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_pca(q,pca) \
+ ((wildfire_pca *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_ne(q,pca) \
+ ((wildfire_ne *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)|(1UL<<16)))
+
+#define WILDFIRE_fe(q,pca) \
+ ((wildfire_fe *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(pca)|(((1UL<<13)-1)<<23)|(3UL<<15)))
+
+#define WILDFIRE_pci(q,h) \
+ ((wildfire_pci *)(WILDFIRE_QBB_IO(q)|WILDFIRE_PCA_ENTITY(((h)&6)>>1)|((((h)&1)|2)<<16)|(((1UL<<13)-1)<<23)))
+
+#define WILDFIRE_IO_BIAS        WILDFIRE_IO(0,0)
+#define WILDFIRE_MEM_BIAS       WILDFIRE_MEM(0,0) /* ??? */
+
+/* The IO address space is larger than 0xffff */
+#define WILDFIRE_IO_SPACE	(8UL*1024*1024)
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * Memory functions.  all accesses are done through linear space.
+ */
+
+__EXTERN_INLINE void __iomem *wildfire_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)(addr + WILDFIRE_IO_BIAS);
+}
+
+__EXTERN_INLINE void __iomem *wildfire_ioremap(unsigned long addr, 
+					       unsigned long size)
+{
+	return (void __iomem *)(addr + WILDFIRE_MEM_BIAS);
+}
+
+__EXTERN_INLINE int wildfire_is_ioaddr(unsigned long addr)
+{
+	return addr >= WILDFIRE_BASE;
+}
+
+__EXTERN_INLINE int wildfire_is_mmio(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+	return (addr & 0x100000000UL) == 0;
+}
+
+#undef __IO_PREFIX
+#define __IO_PREFIX			wildfire
+#define wildfire_trivial_rw_bw		1
+#define wildfire_trivial_rw_lq		1
+#define wildfire_trivial_io_bw		1
+#define wildfire_trivial_io_lq		1
+#define wildfire_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_WILDFIRE__H__ */
diff --git a/arch/alpha/include/asm/cputime.h b/arch/alpha/include/asm/cputime.h
new file mode 100644
index 00000000000..19577fd9323
--- /dev/null
+++ b/arch/alpha/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_CPUTIME_H
+#define __ALPHA_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ALPHA_CPUTIME_H */
diff --git a/arch/alpha/include/asm/current.h b/arch/alpha/include/asm/current.h
new file mode 100644
index 00000000000..094d285a1b3
--- /dev/null
+++ b/arch/alpha/include/asm/current.h
@@ -0,0 +1,9 @@
+#ifndef _ALPHA_CURRENT_H
+#define _ALPHA_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#define get_current()	(current_thread_info()->task)
+#define current		get_current()
+
+#endif /* _ALPHA_CURRENT_H */
diff --git a/arch/alpha/include/asm/delay.h b/arch/alpha/include/asm/delay.h
new file mode 100644
index 00000000000..2aa3f410f7e
--- /dev/null
+++ b/arch/alpha/include/asm/delay.h
@@ -0,0 +1,10 @@
+#ifndef __ALPHA_DELAY_H
+#define __ALPHA_DELAY_H
+
+extern void __delay(int loops);
+extern void udelay(unsigned long usecs);
+
+extern void ndelay(unsigned long nsecs);
+#define ndelay ndelay
+
+#endif /* defined(__ALPHA_DELAY_H) */
diff --git a/arch/alpha/include/asm/device.h b/arch/alpha/include/asm/device.h
new file mode 100644
index 00000000000..d8f9872b0e2
--- /dev/null
+++ b/arch/alpha/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/alpha/include/asm/div64.h b/arch/alpha/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/alpha/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..a5801ae02e4
--- /dev/null
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -0,0 +1,69 @@
+#ifndef _ALPHA_DMA_MAPPING_H
+#define _ALPHA_DMA_MAPPING_H
+
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+
+#define dma_map_single(dev, va, size, dir)		\
+		pci_map_single(alpha_gendev_to_pci(dev), va, size, dir)
+#define dma_unmap_single(dev, addr, size, dir)		\
+		pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
+#define dma_alloc_coherent(dev, size, addr, gfp)	\
+	      __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
+#define dma_free_coherent(dev, size, va, addr)		\
+		pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
+#define dma_map_page(dev, page, off, size, dir)		\
+		pci_map_page(alpha_gendev_to_pci(dev), page, off, size, dir)
+#define dma_unmap_page(dev, addr, size, dir)		\
+		pci_unmap_page(alpha_gendev_to_pci(dev), addr, size, dir)
+#define dma_map_sg(dev, sg, nents, dir)			\
+		pci_map_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
+#define dma_unmap_sg(dev, sg, nents, dir)		\
+		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
+#define dma_supported(dev, mask)			\
+		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
+#define dma_mapping_error(dev, addr)				\
+		pci_dma_mapping_error(alpha_gendev_to_pci(dev), addr)
+
+#else	/* no PCI - no IOMMU. */
+
+struct scatterlist;
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t gfp);
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	       enum dma_data_direction direction);
+
+#define dma_free_coherent(dev, size, va, addr)		\
+		free_pages((unsigned long)va, get_order(size))
+#define dma_supported(dev, mask)		(mask < 0x00ffffffUL ? 0 : 1)
+#define dma_map_single(dev, va, size, dir)	virt_to_phys(va)
+#define dma_map_page(dev, page, off, size, dir)	(page_to_pa(page) + off)
+
+#define dma_unmap_single(dev, addr, size, dir)	((void)0)
+#define dma_unmap_page(dev, addr, size, dir)	((void)0)
+#define dma_unmap_sg(dev, sg, nents, dir)	((void)0)
+
+#define dma_mapping_error(dev, addr)  (0)
+
+#endif	/* !CONFIG_PCI */
+
+#define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)			(1)
+
+int dma_set_mask(struct device *dev, u64 mask);
+
+#define dma_sync_single_for_cpu(dev, addr, size, dir)	  ((void)0)
+#define dma_sync_single_for_device(dev, addr, size, dir)  ((void)0)
+#define dma_sync_single_range(dev, addr, off, size, dir)  ((void)0)
+#define dma_sync_sg_for_cpu(dev, sg, nents, dir)	  ((void)0)
+#define dma_sync_sg_for_device(dev, sg, nents, dir)	  ((void)0)
+#define dma_cache_sync(dev, va, size, dir)		  ((void)0)
+#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir)	((void)0)
+#define dma_sync_single_range_for_device(dev, addr, offset, size, dir)	((void)0)
+
+#define dma_get_cache_alignment()			  L1_CACHE_BYTES
+
+#endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h
new file mode 100644
index 00000000000..87cfdbdf08f
--- /dev/null
+++ b/arch/alpha/include/asm/dma.h
@@ -0,0 +1,376 @@
+/*
+ * include/asm-alpha/dma.h
+ *
+ * This is essentially the same as the i386 DMA stuff, as the AlphaPCs
+ * use ISA-compatible dma.  The only extension is support for high-page
+ * registers that allow to set the top 8 bits of a 32-bit DMA address.
+ * This register should be written last when setting up a DMA address
+ * as this will also enable DMA across 64 KB boundaries.
+ */
+
+/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+#define dma_outb	outb
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.  
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0   
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
+ *
+ */
+
+#define MAX_DMA_CHANNELS	8
+
+/*
+  ISA DMA limitations on Alpha platforms,
+
+  These may be due to SIO (PCI<->ISA bridge) chipset limitation, or
+  just a wiring limit.
+*/
+
+/* The maximum address for ISA DMA transfer on Alpha XL, due to an
+   hardware SIO limitation, is 64MB.
+*/
+#define ALPHA_XL_MAX_ISA_DMA_ADDRESS		0x04000000UL
+
+/* The maximum address for ISA DMA transfer on RUFFIAN,
+   due to an hardware SIO limitation, is 16MB.
+*/
+#define ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS	0x01000000UL
+
+/* The maximum address for ISA DMA transfer on SABLE, and some ALCORs,
+   due to an hardware SIO chip limitation, is 2GB.
+*/
+#define ALPHA_SABLE_MAX_ISA_DMA_ADDRESS		0x80000000UL
+#define ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS		0x80000000UL
+
+/*
+  Maximum address for all the others is the complete 32-bit bus
+  address space.
+*/
+#define ALPHA_MAX_ISA_DMA_ADDRESS		0x100000000UL
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define MAX_ISA_DMA_ADDRESS		(alpha_mv.max_isa_dma_address)
+#else
+# if defined(CONFIG_ALPHA_XL)
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_XL_MAX_ISA_DMA_ADDRESS
+# elif defined(CONFIG_ALPHA_RUFFIAN)
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
+# elif defined(CONFIG_ALPHA_SABLE)
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
+# elif defined(CONFIG_ALPHA_ALCOR)
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS
+# else
+#  define MAX_ISA_DMA_ADDRESS		ALPHA_MAX_ISA_DMA_ADDRESS
+# endif
+#endif
+
+/* If we have the iommu, we don't have any address limitations on DMA.
+   Otherwise (Nautilus, RX164), we have to have 0-16 Mb DMA zone
+   like i386. */
+#define MAX_DMA_ADDRESS		(alpha_mv.mv_pci_tbi ?	\
+				 ~0UL : IDENT_ADDR + 0x01000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG            0x09    /* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
+#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
+#define DMA1_EXT_MODE_REG	(0x400 | DMA1_MODE_REG)
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG            0xD2    /* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
+#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
+#define DMA2_EXT_MODE_REG	(0x400 | DMA2_MODE_REG)
+
+#define DMA_ADDR_0              0x00    /* DMA address registers */
+#define DMA_ADDR_1              0x02
+#define DMA_ADDR_2              0x04
+#define DMA_ADDR_3              0x06
+#define DMA_ADDR_4              0xC0
+#define DMA_ADDR_5              0xC4
+#define DMA_ADDR_6              0xC8
+#define DMA_ADDR_7              0xCC
+
+#define DMA_CNT_0               0x01    /* DMA count registers */
+#define DMA_CNT_1               0x03
+#define DMA_CNT_2               0x05
+#define DMA_CNT_3               0x07
+#define DMA_CNT_4               0xC2
+#define DMA_CNT_5               0xC6
+#define DMA_CNT_6               0xCA
+#define DMA_CNT_7               0xCE
+
+#define DMA_PAGE_0              0x87    /* DMA page registers */
+#define DMA_PAGE_1              0x83
+#define DMA_PAGE_2              0x81
+#define DMA_PAGE_3              0x82
+#define DMA_PAGE_5              0x8B
+#define DMA_PAGE_6              0x89
+#define DMA_PAGE_7              0x8A
+
+#define DMA_HIPAGE_0		(0x400 | DMA_PAGE_0)
+#define DMA_HIPAGE_1		(0x400 | DMA_PAGE_1)
+#define DMA_HIPAGE_2		(0x400 | DMA_PAGE_2)
+#define DMA_HIPAGE_3		(0x400 | DMA_PAGE_3)
+#define DMA_HIPAGE_4		(0x400 | DMA_PAGE_4)
+#define DMA_HIPAGE_5		(0x400 | DMA_PAGE_5)
+#define DMA_HIPAGE_6		(0x400 | DMA_PAGE_6)
+#define DMA_HIPAGE_7		(0x400 | DMA_PAGE_7)
+
+#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT	0x10
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr,  DMA1_MASK_REG);
+	else
+		dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(dmanr | 4,  DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr<=3)
+		dma_outb(0,  DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr<=3)
+		dma_outb(mode | dmanr,  DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* set extended mode for a specific DMA channel */
+static __inline__ void set_dma_ext_mode(unsigned int dmanr, char ext_mode)
+{
+	if (dmanr<=3)
+		dma_outb(ext_mode | dmanr,  DMA1_EXT_MODE_REG);
+	else
+		dma_outb(ext_mode | (dmanr&3),  DMA2_EXT_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
+{
+	switch(dmanr) {
+		case 0:
+			dma_outb(pagenr, DMA_PAGE_0);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_0);
+			break;
+		case 1:
+			dma_outb(pagenr, DMA_PAGE_1);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_1);
+			break;
+		case 2:
+			dma_outb(pagenr, DMA_PAGE_2);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_2);
+			break;
+		case 3:
+			dma_outb(pagenr, DMA_PAGE_3);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_3);
+			break;
+		case 5:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_5);
+			break;
+		case 6:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_6);
+			break;
+		case 7:
+			dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+			dma_outb((pagenr >> 8), DMA_HIPAGE_7);
+			break;
+	}
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+	if (dmanr <= 3)  {
+	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+	}  else  {
+	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+	}
+	set_dma_page(dmanr, a>>16);	/* set hipage last to enable 32-bit mode */
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+	if (dmanr <= 3)  {
+	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+	
+	return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+#define KERNEL_HAVE_CHECK_DMA
+extern int check_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
new file mode 100644
index 00000000000..fc1002ea1e0
--- /dev/null
+++ b/arch/alpha/include/asm/elf.h
@@ -0,0 +1,165 @@
+#ifndef __ASM_ALPHA_ELF_H
+#define __ASM_ALPHA_ELF_H
+
+#include <asm/auxvec.h>
+
+/* Special values for the st_other field in the symbol table.  */
+
+#define STO_ALPHA_NOPV		0x80
+#define STO_ALPHA_STD_GPLOAD	0x88
+
+/*
+ * Alpha ELF relocation types
+ */
+#define R_ALPHA_NONE            0       /* No reloc */
+#define R_ALPHA_REFLONG         1       /* Direct 32 bit */
+#define R_ALPHA_REFQUAD         2       /* Direct 64 bit */
+#define R_ALPHA_GPREL32         3       /* GP relative 32 bit */
+#define R_ALPHA_LITERAL         4       /* GP relative 16 bit w/optimization */
+#define R_ALPHA_LITUSE          5       /* Optimization hint for LITERAL */
+#define R_ALPHA_GPDISP          6       /* Add displacement to GP */
+#define R_ALPHA_BRADDR          7       /* PC+4 relative 23 bit shifted */
+#define R_ALPHA_HINT            8       /* PC+4 relative 16 bit shifted */
+#define R_ALPHA_SREL16          9       /* PC relative 16 bit */
+#define R_ALPHA_SREL32          10      /* PC relative 32 bit */
+#define R_ALPHA_SREL64          11      /* PC relative 64 bit */
+#define R_ALPHA_GPRELHIGH       17      /* GP relative 32 bit, high 16 bits */
+#define R_ALPHA_GPRELLOW        18      /* GP relative 32 bit, low 16 bits */
+#define R_ALPHA_GPREL16         19      /* GP relative 16 bit */
+#define R_ALPHA_COPY            24      /* Copy symbol at runtime */
+#define R_ALPHA_GLOB_DAT        25      /* Create GOT entry */
+#define R_ALPHA_JMP_SLOT        26      /* Create PLT entry */
+#define R_ALPHA_RELATIVE        27      /* Adjust by program base */
+#define R_ALPHA_BRSGP		28
+#define R_ALPHA_TLSGD           29
+#define R_ALPHA_TLS_LDM         30
+#define R_ALPHA_DTPMOD64        31
+#define R_ALPHA_GOTDTPREL       32
+#define R_ALPHA_DTPREL64        33
+#define R_ALPHA_DTPRELHI        34
+#define R_ALPHA_DTPRELLO        35
+#define R_ALPHA_DTPREL16        36
+#define R_ALPHA_GOTTPREL        37
+#define R_ALPHA_TPREL64         38
+#define R_ALPHA_TPRELHI         39
+#define R_ALPHA_TPRELLO         40
+#define R_ALPHA_TPREL16         41
+
+#define SHF_ALPHA_GPREL		0x10000000
+
+/* Legal values for e_flags field of Elf64_Ehdr.  */
+
+#define EF_ALPHA_32BIT		1	/* All addresses are below 2GB */
+
+/*
+ * ELF register definitions..
+ */
+
+/*
+ * The OSF/1 version of <sys/procfs.h> makes gregset_t 46 entries long.
+ * I have no idea why that is so.  For now, we just leave it at 33
+ * (32 general regs + processor status word). 
+ */
+#define ELF_NGREG	33
+#define ELF_NFPREG	32
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_ALPHA
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	8192
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x1000000)
+
+/* $0 is set by ld.so to a pointer to a function which might be 
+   registered using atexit.  This provides a mean for the dynamic
+   linker to call DT_FINI functions for shared libraries that have
+   been loaded before the code runs.
+
+   So that we can use the same startup file with static executables,
+   we start programs with a value of 0 to indicate that there is no
+   such function.  */
+
+#define ELF_PLAT_INIT(_r, load_addr)	_r->r0 = 0
+
+/* The registers are layed out in pt_regs for PAL and syscall
+   convenience.  Re-order them for the linear elf_gregset_t.  */
+
+struct pt_regs;
+struct thread_info;
+struct task_struct;
+extern void dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt,
+			    struct thread_info *ti);
+#define ELF_CORE_COPY_REGS(DEST, REGS) \
+	dump_elf_thread(DEST, REGS, current_thread_info());
+
+/* Similar, but for a thread other than current.  */
+
+extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
+#define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \
+	dump_elf_task(*(DEST), TASK)
+
+/* Similar, but for the FP registers.  */
+
+extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
+#define ELF_CORE_COPY_FPREGS(TASK, DEST) \
+	dump_elf_task_fp(*(DEST), TASK)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This is trivial on Alpha, 
+   but not so on other machines. */
+
+#define ELF_HWCAP  (~amask(-1))
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM				\
+({						\
+	enum implver_enum i_ = implver();	\
+	( i_ == IMPLVER_EV4 ? "ev4"		\
+	: i_ == IMPLVER_EV5			\
+	  ? (amask(AMASK_BWX) ? "ev5" : "ev56")	\
+	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
+})
+
+#define SET_PERSONALITY(EX, IBCS2)				\
+	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
+	   ? PER_LINUX_32BIT : (IBCS2) ? PER_SVR4 : PER_LINUX)
+
+extern int alpha_l1i_cacheshape;
+extern int alpha_l1d_cacheshape;
+extern int alpha_l2_cacheshape;
+extern int alpha_l3_cacheshape;
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO						\
+  do {								\
+    NEW_AUX_ENT(AT_L1I_CACHESHAPE, alpha_l1i_cacheshape);	\
+    NEW_AUX_ENT(AT_L1D_CACHESHAPE, alpha_l1d_cacheshape);	\
+    NEW_AUX_ENT(AT_L2_CACHESHAPE, alpha_l2_cacheshape);		\
+    NEW_AUX_ENT(AT_L3_CACHESHAPE, alpha_l3_cacheshape);		\
+  } while (0)
+
+#endif /* __ASM_ALPHA_ELF_H */
diff --git a/arch/alpha/include/asm/emergency-restart.h b/arch/alpha/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/alpha/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/alpha/include/asm/err_common.h b/arch/alpha/include/asm/err_common.h
new file mode 100644
index 00000000000..c2509594210
--- /dev/null
+++ b/arch/alpha/include/asm/err_common.h
@@ -0,0 +1,118 @@
+/*
+ *	linux/include/asm-alpha/err_common.h
+ *
+ *	Copyright (C) 2000 Jeff Wiedemeier (Compaq Computer Corporation)
+ *
+ *	Contains declarations and macros to support Alpha error handling
+ * 	implementations.
+ */
+
+#ifndef __ALPHA_ERR_COMMON_H
+#define __ALPHA_ERR_COMMON_H 1
+
+/*
+ * SCB Vector definitions
+ */
+#define SCB_Q_SYSERR	0x620
+#define SCB_Q_PROCERR	0x630
+#define SCB_Q_SYSMCHK	0x660
+#define SCB_Q_PROCMCHK	0x670
+#define SCB_Q_SYSEVENT	0x680
+
+/*
+ * Disposition definitions for logout frame parser
+ */
+#define MCHK_DISPOSITION_UNKNOWN_ERROR		0x00
+#define MCHK_DISPOSITION_REPORT			0x01
+#define MCHK_DISPOSITION_DISMISS		0x02
+
+/*
+ * Error Log definitions
+ */
+/*
+ * Types
+ */
+
+#define EL_CLASS__TERMINATION		(0)
+#  define EL_TYPE__TERMINATION__TERMINATION		(0)
+#define EL_CLASS__HEADER		(5)
+#  define EL_TYPE__HEADER__SYSTEM_ERROR_FRAME		(1)
+#  define EL_TYPE__HEADER__SYSTEM_EVENT_FRAME		(2)
+#  define EL_TYPE__HEADER__HALT_FRAME			(3)
+#  define EL_TYPE__HEADER__LOGOUT_FRAME			(19)
+#define EL_CLASS__GENERAL_NOTIFICATION	(9)
+#define EL_CLASS__PCI_ERROR_FRAME	(11)
+#define EL_CLASS__REGATTA_FAMILY	(12)
+#  define EL_TYPE__REGATTA__PROCESSOR_ERROR_FRAME	(1)
+#  define EL_TYPE__REGATTA__SYSTEM_ERROR_FRAME		(2)
+#  define EL_TYPE__REGATTA__ENVIRONMENTAL_FRAME		(3)
+#  define EL_TYPE__REGATTA__TITAN_PCHIP0_EXTENDED	(8)
+#  define EL_TYPE__REGATTA__TITAN_PCHIP1_EXTENDED	(9)
+#  define EL_TYPE__REGATTA__TITAN_MEMORY_EXTENDED	(10)
+#  define EL_TYPE__REGATTA__PROCESSOR_DBL_ERROR_HALT	(11)
+#  define EL_TYPE__REGATTA__SYSTEM_DBL_ERROR_HALT	(12)
+#define EL_CLASS__PAL                   (14)
+#  define EL_TYPE__PAL__LOGOUT_FRAME                    (1)
+#  define EL_TYPE__PAL__EV7_PROCESSOR			(4)
+#  define EL_TYPE__PAL__EV7_ZBOX			(5)
+#  define EL_TYPE__PAL__EV7_RBOX			(6)
+#  define EL_TYPE__PAL__EV7_IO				(7)
+#  define EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE	(10)
+#  define EL_TYPE__PAL__ENV__AIRMOVER_FAN		(11)
+#  define EL_TYPE__PAL__ENV__VOLTAGE			(12)
+#  define EL_TYPE__PAL__ENV__INTRUSION			(13)
+#  define EL_TYPE__PAL__ENV__POWER_SUPPLY		(14)
+#  define EL_TYPE__PAL__ENV__LAN			(15)
+#  define EL_TYPE__PAL__ENV__HOT_PLUG			(16)
+
+union el_timestamp {
+	struct {
+		u8 second;
+		u8 minute;
+		u8 hour;
+		u8 day;
+		u8 month;
+		u8 year;
+	} b;
+	u64 as_int;
+};
+
+struct el_subpacket {
+	u16 length;		/* length of header (in bytes)	*/
+	u16 class;		/* header class and type...   	*/
+	u16 type;		/* ...determine content     	*/
+	u16 revision;		/* header revision 		*/
+	union {
+		struct {	/* Class 5, Type 1 - System Error	*/
+			u32 frame_length;
+			u32 frame_packet_count;			
+		} sys_err;			
+		struct {	/* Class 5, Type 2 - System Event 	*/
+			union el_timestamp timestamp;
+			u32 frame_length;
+			u32 frame_packet_count;			
+		} sys_event;
+		struct {	/* Class 5, Type 3 - Double Error Halt	*/
+			u16 halt_code;
+			u16 reserved;
+			union el_timestamp timestamp;
+			u32 frame_length;
+			u32 frame_packet_count;
+		} err_halt;
+		struct {	/* Clasee 5, Type 19 - Logout Frame Header */
+			u32 frame_length;
+			u32 frame_flags;
+			u32 cpu_offset;	
+			u32 system_offset;
+		} logout_header;
+		struct {	/* Class 12 - Regatta			*/
+			u64 cpuid;
+			u64 data_start[1];
+		} regatta_frame;
+		struct {	/* Raw 				        */
+			u64 data_start[1];
+		} raw;
+	} by_type;
+};
+
+#endif /* __ALPHA_ERR_COMMON_H */
diff --git a/arch/alpha/include/asm/err_ev6.h b/arch/alpha/include/asm/err_ev6.h
new file mode 100644
index 00000000000..ea637791e4a
--- /dev/null
+++ b/arch/alpha/include/asm/err_ev6.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_ERR_EV6_H
+#define __ALPHA_ERR_EV6_H 1
+
+/* Dummy include for now. */
+
+#endif /* __ALPHA_ERR_EV6_H */
diff --git a/arch/alpha/include/asm/err_ev7.h b/arch/alpha/include/asm/err_ev7.h
new file mode 100644
index 00000000000..87f99777c2e
--- /dev/null
+++ b/arch/alpha/include/asm/err_ev7.h
@@ -0,0 +1,202 @@
+#ifndef __ALPHA_ERR_EV7_H
+#define __ALPHA_ERR_EV7_H 1
+
+/*
+ * Data for el packet class PAL (14), type LOGOUT_FRAME (1)
+ */
+struct ev7_pal_logout_subpacket {
+	u32 mchk_code;
+	u32 subpacket_count;
+	u64 whami;
+	u64 rbox_whami;
+	u64 rbox_int;
+	u64 exc_addr;
+	union el_timestamp timestamp;
+	u64 halt_code;
+	u64 reserved;
+};
+
+/*
+ * Data for el packet class PAL (14), type EV7_PROCESSOR (4)
+ */
+struct ev7_pal_processor_subpacket {
+	u64 i_stat;
+	u64 dc_stat;
+	u64 c_addr;
+	u64 c_syndrome_1;
+	u64 c_syndrome_0;
+	u64 c_stat;
+	u64 c_sts;
+	u64 mm_stat;
+	u64 exc_addr;
+	u64 ier_cm;
+	u64 isum;
+	u64 pal_base;
+	u64 i_ctl;
+	u64 process_context;
+	u64 cbox_ctl;
+	u64 cbox_stp_ctl;
+	u64 cbox_acc_ctl;
+	u64 cbox_lcl_set;
+	u64 cbox_gbl_set;
+	u64 bbox_ctl;
+	u64 bbox_err_sts;
+	u64 bbox_err_idx;
+	u64 cbox_ddp_err_sts;
+	u64 bbox_dat_rmp;
+	u64 reserved[2];
+};
+
+/*
+ * Data for el packet class PAL (14), type EV7_ZBOX (5)
+ */
+struct ev7_pal_zbox_subpacket {
+	u32 zbox0_dram_err_status_1;
+	u32 zbox0_dram_err_status_2;
+	u32 zbox0_dram_err_status_3;
+	u32 zbox0_dram_err_ctl;
+	u32 zbox0_dram_err_adr;
+	u32 zbox0_dift_timeout;
+	u32 zbox0_dram_mapper_ctl;
+	u32 zbox0_frc_err_adr;
+	u32 zbox0_dift_err_status;
+	u32 reserved1;
+	u32 zbox1_dram_err_status_1;
+	u32 zbox1_dram_err_status_2;
+	u32 zbox1_dram_err_status_3;
+	u32 zbox1_dram_err_ctl;
+	u32 zbox1_dram_err_adr;
+	u32 zbox1_dift_timeout;
+	u32 zbox1_dram_mapper_ctl;
+	u32 zbox1_frc_err_adr;
+	u32 zbox1_dift_err_status;
+	u32 reserved2;
+	u64 cbox_ctl;
+	u64 cbox_stp_ctl;
+	u64 zbox0_error_pa;
+	u64 zbox1_error_pa;
+	u64 zbox0_ored_syndrome;
+	u64 zbox1_ored_syndrome;
+	u64 reserved3[2];
+};
+
+/*
+ * Data for el packet class PAL (14), type EV7_RBOX (6)
+ */
+struct ev7_pal_rbox_subpacket {
+	u64 rbox_cfg;
+	u64 rbox_n_cfg;
+	u64 rbox_s_cfg;
+	u64 rbox_e_cfg;
+	u64 rbox_w_cfg;
+	u64 rbox_n_err;
+	u64 rbox_s_err;
+	u64 rbox_e_err;
+	u64 rbox_w_err;
+	u64 rbox_io_cfg;
+	u64 rbox_io_err;
+	u64 rbox_l_err;
+	u64 rbox_whoami;
+	u64 rbox_imask;
+	u64 rbox_intq;
+	u64 rbox_int;
+	u64 reserved[2];
+};
+
+/*
+ * Data for el packet class PAL (14), type EV7_IO (7)
+ */
+struct ev7_pal_io_one_port {
+	u64 pox_err_sum;
+	u64 pox_tlb_err;
+	u64 pox_spl_cmplt;
+	u64 pox_trans_sum;
+	u64 pox_first_err;
+	u64 pox_mult_err;
+	u64 pox_dm_source;
+	u64 pox_dm_dest;
+	u64 pox_dm_size;
+	u64 pox_dm_ctrl;
+	u64 reserved;
+};
+
+struct ev7_pal_io_subpacket {
+	u64 io_asic_rev;
+	u64 io_sys_rev;
+	u64 io7_uph;
+	u64 hpi_ctl;
+	u64 crd_ctl;
+	u64 hei_ctl;
+	u64 po7_error_sum;
+	u64 po7_uncrr_sym;
+	u64 po7_crrct_sym;
+	u64 po7_ugbge_sym;
+	u64 po7_err_pkt0;
+	u64 po7_err_pkt1;
+	u64 reserved[2];
+	struct ev7_pal_io_one_port ports[4];
+};
+
+/*
+ * Environmental subpacket. Data used for el packets:
+ * 	   class PAL (14), type AMBIENT_TEMPERATURE (10)
+ * 	   class PAL (14), type AIRMOVER_FAN (11)
+ * 	   class PAL (14), type VOLTAGE (12)
+ * 	   class PAL (14), type INTRUSION (13)
+ *	   class PAL (14), type POWER_SUPPLY (14)
+ *	   class PAL (14), type LAN (15)
+ *	   class PAL (14), type HOT_PLUG (16)
+ */
+struct ev7_pal_environmental_subpacket {
+	u16 cabinet;
+	u16 drawer;
+	u16 reserved1[2];
+	u8 module_type;
+	u8 unit_id;		/* unit reporting condition */
+	u8 reserved2;
+	u8 condition;		/* condition reported       */
+};
+
+/*
+ * Convert environmental type to index
+ */
+static inline int ev7_lf_env_index(int type)
+{
+	BUG_ON((type < EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE) 
+	       || (type > EL_TYPE__PAL__ENV__HOT_PLUG));
+
+	return type - EL_TYPE__PAL__ENV__AMBIENT_TEMPERATURE;
+}
+
+/*
+ * Data for generic el packet class PAL.
+ */
+struct ev7_pal_subpacket {
+	union {
+		struct ev7_pal_logout_subpacket logout;	     /* Type     1 */
+		struct ev7_pal_processor_subpacket ev7;	     /* Type     4 */
+		struct ev7_pal_zbox_subpacket zbox;	     /* Type     5 */
+		struct ev7_pal_rbox_subpacket rbox;	     /* Type     6 */
+		struct ev7_pal_io_subpacket io;		     /* Type     7 */
+		struct ev7_pal_environmental_subpacket env;  /* Type 10-16 */
+		u64 as_quad[1];				     /* Raw u64    */
+	} by_type;
+};
+
+/*
+ * Struct to contain collected logout from subpackets.
+ */
+struct ev7_lf_subpackets {
+	struct ev7_pal_logout_subpacket *logout;		/* Type  1 */
+	struct ev7_pal_processor_subpacket *ev7;		/* Type  4 */
+	struct ev7_pal_zbox_subpacket *zbox;			/* Type  5 */
+	struct ev7_pal_rbox_subpacket *rbox;			/* Type  6 */
+	struct ev7_pal_io_subpacket *io;			/* Type  7 */
+	struct ev7_pal_environmental_subpacket *env[7];	     /* Type 10-16 */
+
+	unsigned int io_pid;
+};
+
+#endif /* __ALPHA_ERR_EV7_H */
+
+
diff --git a/arch/alpha/include/asm/errno.h b/arch/alpha/include/asm/errno.h
new file mode 100644
index 00000000000..69e2655249d
--- /dev/null
+++ b/arch/alpha/include/asm/errno.h
@@ -0,0 +1,123 @@
+#ifndef _ALPHA_ERRNO_H
+#define _ALPHA_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#undef	EAGAIN			/* 11 in errno-base.h */
+
+#define	EDEADLK		11	/* Resource deadlock would occur */
+
+#define	EAGAIN		35	/* Try again */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EINPROGRESS	36	/* Operation now in progress */
+#define	EALREADY	37	/* Operation already in progress */
+#define	ENOTSOCK	38	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39	/* Destination address required */
+#define	EMSGSIZE	40	/* Message too long */
+#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42	/* Protocol not available */
+#define	EPROTONOSUPPORT	43	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
+#define	EOPNOTSUPP	45	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	46	/* Protocol family not supported */
+#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
+#define	EADDRINUSE	48	/* Address already in use */
+#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
+#define	ENETDOWN	50	/* Network is down */
+#define	ENETUNREACH	51	/* Network is unreachable */
+#define	ENETRESET	52	/* Network dropped connection because of reset */
+#define	ECONNABORTED	53	/* Software caused connection abort */
+#define	ECONNRESET	54	/* Connection reset by peer */
+#define	ENOBUFS		55	/* No buffer space available */
+#define	EISCONN		56	/* Transport endpoint is already connected */
+#define	ENOTCONN	57	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	58	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
+#define	ETIMEDOUT	60	/* Connection timed out */
+#define	ECONNREFUSED	61	/* Connection refused */
+#define	ELOOP		62	/* Too many symbolic links encountered */
+#define	ENAMETOOLONG	63	/* File name too long */
+#define	EHOSTDOWN	64	/* Host is down */
+#define	EHOSTUNREACH	65	/* No route to host */
+#define	ENOTEMPTY	66	/* Directory not empty */
+
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+
+#define	ENOLCK		77	/* No record locks available */
+#define	ENOSYS		78	/* Function not implemented */
+
+#define	ENOMSG		80	/* No message of desired type */
+#define	EIDRM		81	/* Identifier removed */
+#define	ENOSR		82	/* Out of streams resources */
+#define	ETIME		83	/* Timer expired */
+#define	EBADMSG		84	/* Not a data message */
+#define	EPROTO		85	/* Protocol error */
+#define	ENODATA		86	/* No data available */
+#define	ENOSTR		87	/* Device not a stream */
+
+#define	ENOPKG		92	/* Package not installed */
+
+#define	EILSEQ		116	/* Illegal byte sequence */
+
+/* The following are just random noise.. */
+#define	ECHRNG		88	/* Channel number out of range */
+#define	EL2NSYNC	89	/* Level 2 not synchronized */
+#define	EL3HLT		90	/* Level 3 halted */
+#define	EL3RST		91	/* Level 3 reset */
+
+#define	ELNRNG		93	/* Link number out of range */
+#define	EUNATCH		94	/* Protocol driver not attached */
+#define	ENOCSI		95	/* No CSI structure available */
+#define	EL2HLT		96	/* Level 2 halted */
+#define	EBADE		97	/* Invalid exchange */
+#define	EBADR		98	/* Invalid request descriptor */
+#define	EXFULL		99	/* Exchange full */
+#define	ENOANO		100	/* No anode */
+#define	EBADRQC		101	/* Invalid request code */
+#define	EBADSLT		102	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		104	/* Bad font file format */
+#define	ENONET		105	/* Machine is not on the network */
+#define	ENOLINK		106	/* Link has been severed */
+#define	EADV		107	/* Advertise error */
+#define	ESRMNT		108	/* Srmount error */
+#define	ECOMM		109	/* Communication error on send */
+#define	EMULTIHOP	110	/* Multihop attempted */
+#define	EDOTDOT		111	/* RFS specific error */
+#define	EOVERFLOW	112	/* Value too large for defined data type */
+#define	ENOTUNIQ	113	/* Name not unique on network */
+#define	EBADFD		114	/* File descriptor in bad state */
+#define	EREMCHG		115	/* Remote address changed */
+
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+
+#define	ELIBACC		122	/* Can not access a needed shared library */
+#define	ELIBBAD		123	/* Accessing a corrupted shared library */
+#define	ELIBSCN		124	/* .lib section in a.out corrupted */
+#define	ELIBMAX		125	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	126	/* Cannot exec a shared library directly */
+#define	ERESTART	127	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	128	/* Streams pipe error */
+
+#define ENOMEDIUM	129	/* No medium found */
+#define EMEDIUMTYPE	130	/* Wrong medium type */
+#define	ECANCELED	131	/* Operation Cancelled */
+#define	ENOKEY		132	/* Required key not available */
+#define	EKEYEXPIRED	133	/* Key has expired */
+#define	EKEYREVOKED	134	/* Key has been revoked */
+#define	EKEYREJECTED	135	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	136	/* Owner died */
+#define	ENOTRECOVERABLE	137	/* State not recoverable */
+
+#endif
diff --git a/arch/alpha/include/asm/fb.h b/arch/alpha/include/asm/fb.h
new file mode 100644
index 00000000000..fa9bbb96b2b
--- /dev/null
+++ b/arch/alpha/include/asm/fb.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/device.h>
+
+/* Caching is off in the I/O space quadrant by design.  */
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h
new file mode 100644
index 00000000000..25da0017ec8
--- /dev/null
+++ b/arch/alpha/include/asm/fcntl.h
@@ -0,0 +1,43 @@
+#ifndef _ALPHA_FCNTL_H
+#define _ALPHA_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_CREAT		 01000	/* not fcntl */
+#define O_TRUNC		 02000	/* not fcntl */
+#define O_EXCL		 04000	/* not fcntl */
+#define O_NOCTTY	010000	/* not fcntl */
+
+#define O_NONBLOCK	 00004
+#define O_APPEND	 00010
+#define O_SYNC		040000
+#define O_DIRECTORY	0100000	/* must be a directory */
+#define O_NOFOLLOW	0200000 /* don't follow links */
+#define O_LARGEFILE	0400000 /* will be set by the kernel on every open */
+#define O_DIRECT	02000000 /* direct disk access - should check with OSF/1 */
+#define O_NOATIME	04000000
+#define O_CLOEXEC	010000000 /* set close_on_exec */
+
+#define F_GETLK		7
+#define F_SETLK		8
+#define F_SETLKW	9
+
+#define F_SETOWN	5	/*  for sockets. */
+#define F_GETOWN	6	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		1
+#define F_WRLCK		2
+#define F_UNLCK		8
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		16	/* or 3 */
+#define F_SHLCK		32	/* or 4 */
+
+#define F_INPROGRESS	64
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
new file mode 100644
index 00000000000..0be50413b2b
--- /dev/null
+++ b/arch/alpha/include/asm/floppy.h
@@ -0,0 +1,115 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_ALPHA_FLOPPY_H
+#define __ASM_ALPHA_FLOPPY_H
+
+
+#define fd_inb(port)			inb_p(port)
+#define fd_outb(value,port)		outb_p(value,port)
+
+#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
+#define fd_disable_dma()        disable_dma(FLOPPY_DMA)
+#define fd_request_dma()        request_dma(FLOPPY_DMA,"floppy")
+#define fd_free_dma()           free_dma(FLOPPY_DMA)
+#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
+#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
+#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
+#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_cacheflush(addr,size) /* nothing */
+#define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
+					    IRQF_DISABLED, "floppy", NULL)
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+
+#define fd_dma_setup(addr,size,mode,io) alpha_fd_dma_setup(addr,size,mode,io)
+
+static __inline__ int 
+alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	static unsigned long prev_size;
+	static dma_addr_t bus_addr = 0;
+	static char *prev_addr;
+	static int prev_dir;
+	int dir;
+
+	dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+
+	if (bus_addr 
+	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
+		/* different from last time -- unmap prev */
+		pci_unmap_single(isa_bridge, bus_addr, prev_size, prev_dir);
+		bus_addr = 0;
+	}
+
+	if (!bus_addr)	/* need to map it */
+		bus_addr = pci_map_single(isa_bridge, addr, size, dir);
+
+	/* remember this one as prev */
+	prev_addr = addr;
+	prev_size = size;
+	prev_dir = dir;
+
+	fd_clear_dma_ff();
+	fd_cacheflush(addr, size);
+	fd_set_dma_mode(mode);
+	set_dma_addr(FLOPPY_DMA, bus_addr);
+	fd_set_dma_count(size);
+	virtual_dma_port = io;
+	fd_enable_dma();
+
+	return 0;
+}
+
+#endif /* CONFIG_PCI */
+
+__inline__ void virtual_dma_init(void)
+{
+	/* Nothing to do on an Alpha */
+}
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Again, the CMOS information doesn't work on the alpha..
+ */
+#define FLOPPY0_TYPE 6
+#define FLOPPY1_TYPE 0
+
+#define N_FDC 2
+#define N_DRIVE 8
+
+/*
+ * Most Alphas have no problems with floppy DMA crossing 64k borders,
+ * except for certain ones, like XL and RUFFIAN.
+ *
+ * However, the test is simple and fast, and this *is* floppy, after all,
+ * so we do it for all platforms, just to make sure.
+ *
+ * This is advantageous in other circumstances as well, as in moving
+ * about the PCI DMA windows and forcing the floppy to start doing
+ * scatter-gather when it never had before, and there *is* a problem
+ * on that platform... ;-}
+ */
+
+static inline unsigned long CROSS_64KB(void *a, unsigned long s)
+{
+	unsigned long p = (unsigned long)a;
+	return ((p + s - 1) ^ p) & ~0xffffUL;
+}
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h
new file mode 100644
index 00000000000..ecb17a72acc
--- /dev/null
+++ b/arch/alpha/include/asm/fpu.h
@@ -0,0 +1,193 @@
+#ifndef __ASM_ALPHA_FPU_H
+#define __ASM_ALPHA_FPU_H
+
+/*
+ * Alpha floating-point control register defines:
+ */
+#define FPCR_DNOD	(1UL<<47)	/* denorm INV trap disable */
+#define FPCR_DNZ	(1UL<<48)	/* denorms to zero */
+#define FPCR_INVD	(1UL<<49)	/* invalid op disable (opt.) */
+#define FPCR_DZED	(1UL<<50)	/* division by zero disable (opt.) */
+#define FPCR_OVFD	(1UL<<51)	/* overflow disable (optional) */
+#define FPCR_INV	(1UL<<52)	/* invalid operation */
+#define FPCR_DZE	(1UL<<53)	/* division by zero */
+#define FPCR_OVF	(1UL<<54)	/* overflow */
+#define FPCR_UNF	(1UL<<55)	/* underflow */
+#define FPCR_INE	(1UL<<56)	/* inexact */
+#define FPCR_IOV	(1UL<<57)	/* integer overflow */
+#define FPCR_UNDZ	(1UL<<60)	/* underflow to zero (opt.) */
+#define FPCR_UNFD	(1UL<<61)	/* underflow disable (opt.) */
+#define FPCR_INED	(1UL<<62)	/* inexact disable (opt.) */
+#define FPCR_SUM	(1UL<<63)	/* summary bit */
+
+#define FPCR_DYN_SHIFT	58		/* first dynamic rounding mode bit */
+#define FPCR_DYN_CHOPPED (0x0UL << FPCR_DYN_SHIFT)	/* towards 0 */
+#define FPCR_DYN_MINUS	 (0x1UL << FPCR_DYN_SHIFT)	/* towards -INF */
+#define FPCR_DYN_NORMAL	 (0x2UL << FPCR_DYN_SHIFT)	/* towards nearest */
+#define FPCR_DYN_PLUS	 (0x3UL << FPCR_DYN_SHIFT)	/* towards +INF */
+#define FPCR_DYN_MASK	 (0x3UL << FPCR_DYN_SHIFT)
+
+#define FPCR_MASK	0xffff800000000000L
+
+/*
+ * IEEE trap enables are implemented in software.  These per-thread
+ * bits are stored in the "ieee_state" field of "struct thread_info".
+ * Thus, the bits are defined so as not to conflict with the
+ * floating-point enable bit (which is architected).  On top of that,
+ * we want to make these bits compatible with OSF/1 so
+ * ieee_set_fp_control() etc. can be implemented easily and
+ * compatibly.  The corresponding definitions are in
+ * /usr/include/machine/fpu.h under OSF/1.
+ */
+#define IEEE_TRAP_ENABLE_INV	(1UL<<1)	/* invalid op */
+#define IEEE_TRAP_ENABLE_DZE	(1UL<<2)	/* division by zero */
+#define IEEE_TRAP_ENABLE_OVF	(1UL<<3)	/* overflow */
+#define IEEE_TRAP_ENABLE_UNF	(1UL<<4)	/* underflow */
+#define IEEE_TRAP_ENABLE_INE	(1UL<<5)	/* inexact */
+#define IEEE_TRAP_ENABLE_DNO	(1UL<<6)	/* denorm */
+#define IEEE_TRAP_ENABLE_MASK	(IEEE_TRAP_ENABLE_INV | IEEE_TRAP_ENABLE_DZE |\
+				 IEEE_TRAP_ENABLE_OVF | IEEE_TRAP_ENABLE_UNF |\
+				 IEEE_TRAP_ENABLE_INE | IEEE_TRAP_ENABLE_DNO)
+
+/* Denorm and Underflow flushing */
+#define IEEE_MAP_DMZ		(1UL<<12)	/* Map denorm inputs to zero */
+#define IEEE_MAP_UMZ		(1UL<<13)	/* Map underflowed outputs to zero */
+
+#define IEEE_MAP_MASK		(IEEE_MAP_DMZ | IEEE_MAP_UMZ)
+
+/* status bits coming from fpcr: */
+#define IEEE_STATUS_INV		(1UL<<17)
+#define IEEE_STATUS_DZE		(1UL<<18)
+#define IEEE_STATUS_OVF		(1UL<<19)
+#define IEEE_STATUS_UNF		(1UL<<20)
+#define IEEE_STATUS_INE		(1UL<<21)
+#define IEEE_STATUS_DNO		(1UL<<22)
+
+#define IEEE_STATUS_MASK	(IEEE_STATUS_INV | IEEE_STATUS_DZE |	\
+				 IEEE_STATUS_OVF | IEEE_STATUS_UNF |	\
+				 IEEE_STATUS_INE | IEEE_STATUS_DNO)
+
+#define IEEE_SW_MASK		(IEEE_TRAP_ENABLE_MASK |		\
+				 IEEE_STATUS_MASK | IEEE_MAP_MASK)
+
+#define IEEE_CURRENT_RM_SHIFT	32
+#define IEEE_CURRENT_RM_MASK	(3UL<<IEEE_CURRENT_RM_SHIFT)
+
+#define IEEE_STATUS_TO_EXCSUM_SHIFT	16
+
+#define IEEE_INHERIT    (1UL<<63)	/* inherit on thread create? */
+
+/*
+ * Convert the software IEEE trap enable and status bits into the
+ * hardware fpcr format. 
+ *
+ * Digital Unix engineers receive my thanks for not defining the
+ * software bits identical to the hardware bits.  The chip designers
+ * receive my thanks for making all the not-implemented fpcr bits
+ * RAZ forcing us to use system calls to read/write this value.
+ */
+
+static inline unsigned long
+ieee_swcr_to_fpcr(unsigned long sw)
+{
+	unsigned long fp;
+	fp = (sw & IEEE_STATUS_MASK) << 35;
+	fp |= (sw & IEEE_MAP_DMZ) << 36;
+	fp |= (sw & IEEE_STATUS_MASK ? FPCR_SUM : 0);
+	fp |= (~sw & (IEEE_TRAP_ENABLE_INV
+		      | IEEE_TRAP_ENABLE_DZE
+		      | IEEE_TRAP_ENABLE_OVF)) << 48;
+	fp |= (~sw & (IEEE_TRAP_ENABLE_UNF | IEEE_TRAP_ENABLE_INE)) << 57;
+	fp |= (sw & IEEE_MAP_UMZ ? FPCR_UNDZ | FPCR_UNFD : 0);
+	fp |= (~sw & IEEE_TRAP_ENABLE_DNO) << 41;
+	return fp;
+}
+
+static inline unsigned long
+ieee_fpcr_to_swcr(unsigned long fp)
+{
+	unsigned long sw;
+	sw = (fp >> 35) & IEEE_STATUS_MASK;
+	sw |= (fp >> 36) & IEEE_MAP_DMZ;
+	sw |= (~fp >> 48) & (IEEE_TRAP_ENABLE_INV
+			     | IEEE_TRAP_ENABLE_DZE
+			     | IEEE_TRAP_ENABLE_OVF);
+	sw |= (~fp >> 57) & (IEEE_TRAP_ENABLE_UNF | IEEE_TRAP_ENABLE_INE);
+	sw |= (fp >> 47) & IEEE_MAP_UMZ;
+	sw |= (~fp >> 41) & IEEE_TRAP_ENABLE_DNO;
+	return sw;
+}
+
+#ifdef __KERNEL__
+
+/* The following two functions don't need trapb/excb instructions
+   around the mf_fpcr/mt_fpcr instructions because (a) the kernel
+   never generates arithmetic faults and (b) call_pal instructions
+   are implied trap barriers.  */
+
+static inline unsigned long
+rdfpcr(void)
+{
+	unsigned long tmp, ret;
+
+#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
+	__asm__ __volatile__ (
+		"ftoit $f0,%0\n\t"
+		"mf_fpcr $f0\n\t"
+		"ftoit $f0,%1\n\t"
+		"itoft %0,$f0"
+		: "=r"(tmp), "=r"(ret));
+#else
+	__asm__ __volatile__ (
+		"stt $f0,%0\n\t"
+		"mf_fpcr $f0\n\t"
+		"stt $f0,%1\n\t"
+		"ldt $f0,%0"
+		: "=m"(tmp), "=m"(ret));
+#endif
+
+	return ret;
+}
+
+static inline void
+wrfpcr(unsigned long val)
+{
+	unsigned long tmp;
+
+#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
+	__asm__ __volatile__ (
+		"ftoit $f0,%0\n\t"
+		"itoft %1,$f0\n\t"
+		"mt_fpcr $f0\n\t"
+		"itoft %0,$f0"
+		: "=&r"(tmp) : "r"(val));
+#else
+	__asm__ __volatile__ (
+		"stt $f0,%0\n\t"
+		"ldt $f0,%1\n\t"
+		"mt_fpcr $f0\n\t"
+		"ldt $f0,%0"
+		: "=m"(tmp) : "m"(val));
+#endif
+}
+
+static inline unsigned long
+swcr_update_status(unsigned long swcr, unsigned long fpcr)
+{
+	/* EV6 implements most of the bits in hardware.  Collect
+	   the acrued exception bits from the real fpcr.  */
+	if (implver() == IMPLVER_EV6) {
+		swcr &= ~IEEE_STATUS_MASK;
+		swcr |= (fpcr >> 35) & IEEE_STATUS_MASK;
+	}
+	return swcr;
+}
+
+extern unsigned long alpha_read_fp_reg (unsigned long reg);
+extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
+extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
+extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_ALPHA_FPU_H */
diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h
new file mode 100644
index 00000000000..6a332a9f099
--- /dev/null
+++ b/arch/alpha/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/alpha/include/asm/gct.h b/arch/alpha/include/asm/gct.h
new file mode 100644
index 00000000000..3504c704927
--- /dev/null
+++ b/arch/alpha/include/asm/gct.h
@@ -0,0 +1,58 @@
+#ifndef __ALPHA_GCT_H
+#define __ALPHA_GCT_H
+
+typedef u64 gct_id;
+typedef u64 gct6_handle;
+
+typedef struct __gct6_node {
+	u8 type;	
+	u8 subtype;
+	u16 size;
+	u32 hd_extension;
+	gct6_handle owner;
+	gct6_handle active_user;
+	gct_id id;
+	u64 flags;
+	u16 rev;
+	u16 change_counter;
+	u16 max_child;
+	u16 reserved1;
+	gct6_handle saved_owner;
+	gct6_handle affinity;
+	gct6_handle parent;
+	gct6_handle next;
+	gct6_handle prev;
+	gct6_handle child;
+	u64 fw_flags;
+	u64 os_usage;
+	u64 fru_id;
+	u32 checksum;
+	u32 magic;	/* 'GLXY' */
+} gct6_node;
+
+typedef struct {
+	u8 type;	
+	u8 subtype;
+	void (*callout)(gct6_node *);
+} gct6_search_struct;
+
+#define GCT_NODE_MAGIC	  0x59584c47	/* 'GLXY' */
+
+/* 
+ * node types 
+ */
+#define GCT_TYPE_HOSE			0x0E
+
+/*
+ * node subtypes
+ */
+#define GCT_SUBTYPE_IO_PORT_MODULE	0x2C
+
+#define GCT_NODE_PTR(off) ((gct6_node *)((char *)hwrpb + 		\
+					 hwrpb->frut_offset + 		\
+					 (gct6_handle)(off)))		\
+
+int gct6_find_nodes(gct6_node *, gct6_search_struct *);
+
+#endif /* __ALPHA_GCT_H */
+
diff --git a/arch/alpha/include/asm/gentrap.h b/arch/alpha/include/asm/gentrap.h
new file mode 100644
index 00000000000..ae50cc3192c
--- /dev/null
+++ b/arch/alpha/include/asm/gentrap.h
@@ -0,0 +1,37 @@
+#ifndef _ASMAXP_GENTRAP_H
+#define _ASMAXP_GENTRAP_H
+
+/*
+ * Definitions for gentrap causes.  They are generated by user-level
+ * programs and therefore should be compatible with the corresponding
+ * OSF/1 definitions.
+ */
+#define GEN_INTOVF	-1	/* integer overflow */
+#define GEN_INTDIV	-2	/* integer division by zero */
+#define GEN_FLTOVF	-3	/* fp overflow */
+#define GEN_FLTDIV	-4	/* fp division by zero */
+#define GEN_FLTUND	-5	/* fp underflow */
+#define GEN_FLTINV	-6	/* invalid fp operand */
+#define GEN_FLTINE	-7	/* inexact fp operand */
+#define GEN_DECOVF	-8	/* decimal overflow (for COBOL??) */
+#define GEN_DECDIV	-9	/* decimal division by zero */
+#define GEN_DECINV	-10	/* invalid decimal operand */
+#define GEN_ROPRAND	-11	/* reserved operand */
+#define GEN_ASSERTERR	-12	/* assertion error */
+#define GEN_NULPTRERR	-13	/* null pointer error */
+#define GEN_STKOVF	-14	/* stack overflow */
+#define GEN_STRLENERR	-15	/* string length error */
+#define GEN_SUBSTRERR	-16	/* substring error */
+#define GEN_RANGERR	-17	/* range error */
+#define GEN_SUBRNG	-18
+#define GEN_SUBRNG1	-19	 
+#define GEN_SUBRNG2	-20
+#define GEN_SUBRNG3	-21	/* these report range errors for */
+#define GEN_SUBRNG4	-22	/* subscripting (indexing) at levels 0..7 */
+#define GEN_SUBRNG5	-23
+#define GEN_SUBRNG6	-24
+#define GEN_SUBRNG7	-25
+
+/* the remaining codes (-26..-1023) are reserved. */
+
+#endif /* _ASMAXP_GENTRAP_H */
diff --git a/arch/alpha/include/asm/hardirq.h b/arch/alpha/include/asm/hardirq.h
new file mode 100644
index 00000000000..d953e234daa
--- /dev/null
+++ b/arch/alpha/include/asm/hardirq.h
@@ -0,0 +1,30 @@
+#ifndef _ALPHA_HARDIRQ_H
+#define _ALPHA_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned long __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+void ack_bad_irq(unsigned int irq);
+
+#define HARDIRQ_BITS	12
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially nestable IRQ sources in the system
+ * to nest on a single CPU. On Alpha, interrupts are masked at the CPU
+ * by IPL as well as at the system level. We only have 8 IPLs (UNIX PALcode)
+ * so we really only have 8 nestable IRQs, but allow some overhead
+ */
+#if (1 << HARDIRQ_BITS) < 16
+#error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* _ALPHA_HARDIRQ_H */
diff --git a/arch/alpha/include/asm/hw_irq.h b/arch/alpha/include/asm/hw_irq.h
new file mode 100644
index 00000000000..a37db0f9509
--- /dev/null
+++ b/arch/alpha/include/asm/hw_irq.h
@@ -0,0 +1,13 @@
+#ifndef _ALPHA_HW_IRQ_H
+#define _ALPHA_HW_IRQ_H
+
+
+extern volatile unsigned long irq_err_count;
+
+#ifdef CONFIG_ALPHA_GENERIC
+#define ACTUAL_NR_IRQS	alpha_mv.nr_irqs
+#else
+#define ACTUAL_NR_IRQS	NR_IRQS
+#endif
+
+#endif
diff --git a/arch/alpha/include/asm/hwrpb.h b/arch/alpha/include/asm/hwrpb.h
new file mode 100644
index 00000000000..8e8f871af7c
--- /dev/null
+++ b/arch/alpha/include/asm/hwrpb.h
@@ -0,0 +1,220 @@
+#ifndef __ALPHA_HWRPB_H
+#define __ALPHA_HWRPB_H
+
+#define INIT_HWRPB ((struct hwrpb_struct *) 0x10000000)
+
+/*
+ * DEC processor types for Alpha systems.  Found in HWRPB.
+ * These values are architected.
+ */
+
+#define EV3_CPU                 1       /* EV3                  */
+#define EV4_CPU                 2       /* EV4 (21064)          */
+#define LCA4_CPU                4       /* LCA4 (21066/21068)   */
+#define EV5_CPU                 5       /* EV5 (21164)          */
+#define EV45_CPU                6       /* EV4.5 (21064/xxx)    */
+#define EV56_CPU		7	/* EV5.6 (21164)	*/
+#define EV6_CPU			8	/* EV6 (21264)		*/
+#define PCA56_CPU		9	/* PCA56 (21164PC)	*/
+#define PCA57_CPU		10	/* PCA57 (notyet)	*/
+#define EV67_CPU		11	/* EV67 (21264A)	*/
+#define EV68CB_CPU		12	/* EV68CB (21264C)	*/
+#define EV68AL_CPU		13	/* EV68AL (21264B)	*/
+#define EV68CX_CPU		14	/* EV68CX (21264D)	*/
+#define EV7_CPU			15	/* EV7 (21364)		*/
+#define EV79_CPU		16	/* EV79 (21364??)	*/
+#define EV69_CPU		17	/* EV69 (21264/EV69A)	*/
+
+/*
+ * DEC system types for Alpha systems.  Found in HWRPB.
+ * These values are architected.
+ */
+
+#define ST_ADU			  1	/* Alpha ADU systype	*/
+#define ST_DEC_4000		  2	/* Cobra systype	*/
+#define ST_DEC_7000		  3	/* Ruby systype		*/
+#define ST_DEC_3000_500		  4	/* Flamingo systype	*/
+#define ST_DEC_2000_300		  6	/* Jensen systype	*/
+#define ST_DEC_3000_300		  7	/* Pelican systype	*/
+#define ST_DEC_2100_A500	  9	/* Sable systype	*/
+#define ST_DEC_AXPVME_64	 10	/* AXPvme system type	*/
+#define ST_DEC_AXPPCI_33	 11	/* NoName system type	*/
+#define ST_DEC_TLASER		 12	/* Turbolaser systype	*/
+#define ST_DEC_2100_A50		 13	/* Avanti systype	*/
+#define ST_DEC_MUSTANG		 14	/* Mustang systype	*/
+#define ST_DEC_ALCOR		 15	/* Alcor (EV5) systype	*/
+#define ST_DEC_1000		 17	/* Mikasa systype	*/
+#define ST_DEC_EB64		 18	/* EB64 systype		*/
+#define ST_DEC_EB66		 19	/* EB66 systype		*/
+#define ST_DEC_EB64P		 20	/* EB64+ systype	*/
+#define ST_DEC_BURNS		 21	/* laptop systype	*/
+#define ST_DEC_RAWHIDE		 22	/* Rawhide systype	*/
+#define ST_DEC_K2		 23	/* K2 systype		*/
+#define ST_DEC_LYNX		 24	/* Lynx systype		*/
+#define ST_DEC_XL		 25	/* Alpha XL systype	*/
+#define ST_DEC_EB164		 26	/* EB164 systype	*/
+#define ST_DEC_NORITAKE		 27	/* Noritake systype	*/
+#define ST_DEC_CORTEX		 28	/* Cortex systype	*/
+#define ST_DEC_MIATA		 30	/* Miata systype        */
+#define ST_DEC_XXM		 31	/* XXM systype		*/
+#define ST_DEC_TAKARA		 32	/* Takara systype	*/
+#define ST_DEC_YUKON		 33	/* Yukon systype	*/
+#define ST_DEC_TSUNAMI		 34	/* Tsunami systype	*/
+#define ST_DEC_WILDFIRE		 35	/* Wildfire systype	*/
+#define ST_DEC_CUSCO		 36	/* CUSCO systype	*/
+#define ST_DEC_EIGER		 37	/* Eiger systype	*/
+#define ST_DEC_TITAN		 38	/* Titan systype	*/
+#define ST_DEC_MARVEL		 39	/* Marvel systype	*/
+
+/* UNOFFICIAL!!! */
+#define ST_UNOFFICIAL_BIAS	100
+#define ST_DTI_RUFFIAN		101	/* RUFFIAN systype	*/
+
+/* Alpha Processor, Inc. systems */
+#define ST_API_BIAS		200
+#define ST_API_NAUTILUS		201	/* UP1000 systype	*/
+
+struct pcb_struct {
+	unsigned long ksp;
+	unsigned long usp;
+	unsigned long ptbr;
+	unsigned int pcc;
+	unsigned int asn;
+	unsigned long unique;
+	unsigned long flags;
+	unsigned long res1, res2;
+};
+
+struct percpu_struct {
+	unsigned long hwpcb[16];
+	unsigned long flags;
+	unsigned long pal_mem_size;
+	unsigned long pal_scratch_size;
+	unsigned long pal_mem_pa;
+	unsigned long pal_scratch_pa;
+	unsigned long pal_revision;
+	unsigned long type;
+	unsigned long variation;
+	unsigned long revision;
+	unsigned long serial_no[2];
+	unsigned long logout_area_pa;
+	unsigned long logout_area_len;
+	unsigned long halt_PCBB;
+	unsigned long halt_PC;
+	unsigned long halt_PS;
+	unsigned long halt_arg;
+	unsigned long halt_ra;
+	unsigned long halt_pv;
+	unsigned long halt_reason;
+	unsigned long res;
+	unsigned long ipc_buffer[21];
+	unsigned long palcode_avail[16];
+	unsigned long compatibility;
+	unsigned long console_data_log_pa;
+	unsigned long console_data_log_length;
+	unsigned long bcache_info;
+};
+
+struct procdesc_struct {
+	unsigned long weird_vms_stuff;
+	unsigned long address;
+};
+
+struct vf_map_struct {
+	unsigned long va;
+	unsigned long pa;
+	unsigned long count;
+};
+
+struct crb_struct {
+	struct procdesc_struct * dispatch_va;
+	struct procdesc_struct * dispatch_pa;
+	struct procdesc_struct * fixup_va;
+	struct procdesc_struct * fixup_pa;
+	/* virtual->physical map */
+	unsigned long map_entries;
+	unsigned long map_pages;
+	struct vf_map_struct map[1];
+};
+
+struct memclust_struct {
+	unsigned long start_pfn;
+	unsigned long numpages;
+	unsigned long numtested;
+	unsigned long bitmap_va;
+	unsigned long bitmap_pa;
+	unsigned long bitmap_chksum;
+	unsigned long usage;
+};
+
+struct memdesc_struct {
+	unsigned long chksum;
+	unsigned long optional_pa;
+	unsigned long numclusters;
+	struct memclust_struct cluster[0];
+};
+
+struct dsr_struct {
+	long smm;			/* SMM nubber used by LMF       */
+	unsigned long  lurt_off;	/* offset to LURT table         */
+	unsigned long  sysname_off;	/* offset to sysname char count */
+};
+
+struct hwrpb_struct {
+	unsigned long phys_addr;	/* check: physical address of the hwrpb */
+	unsigned long id;		/* check: "HWRPB\0\0\0" */
+	unsigned long revision;	
+	unsigned long size;		/* size of hwrpb */
+	unsigned long cpuid;
+	unsigned long pagesize;		/* 8192, I hope */
+	unsigned long pa_bits;		/* number of physical address bits */
+	unsigned long max_asn;
+	unsigned char ssn[16];		/* system serial number: big bother is watching */
+	unsigned long sys_type;
+	unsigned long sys_variation;
+	unsigned long sys_revision;
+	unsigned long intr_freq;	/* interval clock frequency * 4096 */
+	unsigned long cycle_freq;	/* cycle counter frequency */
+	unsigned long vptb;		/* Virtual Page Table Base address */
+	unsigned long res1;
+	unsigned long tbhb_offset;	/* Translation Buffer Hint Block */
+	unsigned long nr_processors;
+	unsigned long processor_size;
+	unsigned long processor_offset;
+	unsigned long ctb_nr;
+	unsigned long ctb_size;		/* console terminal block size */
+	unsigned long ctbt_offset;	/* console terminal block table offset */
+	unsigned long crb_offset;	/* console callback routine block */
+	unsigned long mddt_offset;	/* memory data descriptor table */
+	unsigned long cdb_offset;	/* configuration data block (or NULL) */
+	unsigned long frut_offset;	/* FRU table (or NULL) */
+	void (*save_terminal)(unsigned long);
+	unsigned long save_terminal_data;
+	void (*restore_terminal)(unsigned long);
+	unsigned long restore_terminal_data;
+	void (*CPU_restart)(unsigned long);
+	unsigned long CPU_restart_data;
+	unsigned long res2;
+	unsigned long res3;
+	unsigned long chksum;
+	unsigned long rxrdy;
+	unsigned long txrdy;
+	unsigned long dsr_offset;	/* "Dynamic System Recognition Data Block Table" */
+};
+
+#ifdef __KERNEL__
+
+extern struct hwrpb_struct *hwrpb;
+
+static inline void
+hwrpb_update_checksum(struct hwrpb_struct *h)
+{
+	unsigned long sum = 0, *l;
+        for (l = (unsigned long *) h; l < (unsigned long *) &h->chksum; ++l)
+                sum += *l;
+        h->chksum = sum;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_HWRPB_H */
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
new file mode 100644
index 00000000000..e971ab000f9
--- /dev/null
+++ b/arch/alpha/include/asm/io.h
@@ -0,0 +1,577 @@
+#ifndef __ALPHA_IO_H
+#define __ALPHA_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/compiler.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/machvec.h>
+#include <asm/hwrpb.h>
+
+/* The generic header contains only prototypes.  Including it ensures that
+   the implementation we have here matches that interface.  */
+#include <asm-generic/iomap.h>
+
+/* We don't use IO slowdowns on the Alpha, but.. */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+/*
+ * Virtual -> physical identity mapping starts at this offset
+ */
+#ifdef USE_48_BIT_KSEG
+#define IDENT_ADDR     0xffff800000000000UL
+#else
+#define IDENT_ADDR     0xfffffc0000000000UL
+#endif
+
+/*
+ * We try to avoid hae updates (thus the cache), but when we
+ * do need to update the hae, we need to do it atomically, so
+ * that any interrupts wouldn't get confused with the hae
+ * register not being up-to-date with respect to the hardware
+ * value.
+ */
+extern inline void __set_hae(unsigned long new_hae)
+{
+	unsigned long flags;
+	local_irq_save(flags);
+
+	alpha_mv.hae_cache = new_hae;
+	*alpha_mv.hae_register = new_hae;
+	mb();
+	/* Re-read to make sure it was written.  */
+	new_hae = *alpha_mv.hae_register;
+
+	local_irq_restore(flags);
+}
+
+extern inline void set_hae(unsigned long new_hae)
+{
+	if (new_hae != alpha_mv.hae_cache)
+		__set_hae(new_hae);
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+#ifdef USE_48_BIT_KSEG
+static inline unsigned long virt_to_phys(void *address)
+{
+	return (unsigned long)address - IDENT_ADDR;
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *) (address + IDENT_ADDR);
+}
+#else
+static inline unsigned long virt_to_phys(void *address)
+{
+        unsigned long phys = (unsigned long)address;
+
+	/* Sign-extend from bit 41.  */
+	phys <<= (64 - 41);
+	phys = (long)phys >> (64 - 41);
+
+	/* Crop to the physical address width of the processor.  */
+        phys &= (1ul << hwrpb->pa_bits) - 1;
+
+        return phys;
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+        return (void *)(IDENT_ADDR + (address & ((1ul << 41) - 1)));
+}
+#endif
+
+#define page_to_phys(page)	page_to_pa(page)
+
+static inline dma_addr_t __deprecated isa_page_to_bus(struct page *page)
+{
+	return page_to_phys(page);
+}
+
+/* This depends on working iommu.  */
+#define BIO_VMERGE_BOUNDARY	(alpha_mv.mv_pci_tbi ? PAGE_SIZE : 0)
+
+/* Maximum PIO space address supported?  */
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * Change addresses as seen by the kernel (virtual) to addresses as
+ * seen by a device (bus), and vice versa.
+ *
+ * Note that this only works for a limited range of kernel addresses,
+ * and very well may not span all memory.  Consider this interface 
+ * deprecated in favour of the DMA-mapping API.
+ */
+extern unsigned long __direct_map_base;
+extern unsigned long __direct_map_size;
+
+static inline unsigned long __deprecated virt_to_bus(void *address)
+{
+	unsigned long phys = virt_to_phys(address);
+	unsigned long bus = phys + __direct_map_base;
+	return phys <= __direct_map_size ? bus : 0;
+}
+#define isa_virt_to_bus virt_to_bus
+
+static inline void * __deprecated bus_to_virt(unsigned long address)
+{
+	void *virt;
+
+	/* This check is a sanity check but also ensures that bus address 0
+	   maps to virtual address 0 which is useful to detect null pointers
+	   (the NCR driver is much simpler if NULL pointers are preserved).  */
+	address -= __direct_map_base;
+	virt = phys_to_virt(address);
+	return (long)address <= 0 ? NULL : virt;
+}
+#define isa_bus_to_virt bus_to_virt
+
+/*
+ * There are different chipsets to interface the Alpha CPUs to the world.
+ */
+
+#define IO_CONCAT(a,b)	_IO_CONCAT(a,b)
+#define _IO_CONCAT(a,b)	a ## _ ## b
+
+#ifdef CONFIG_ALPHA_GENERIC
+
+/* In a generic kernel, we always go through the machine vector.  */
+
+#define REMAP1(TYPE, NAME, QUAL)					\
+static inline TYPE generic_##NAME(QUAL void __iomem *addr)		\
+{									\
+	return alpha_mv.mv_##NAME(addr);				\
+}
+
+#define REMAP2(TYPE, NAME, QUAL)					\
+static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr)	\
+{									\
+	alpha_mv.mv_##NAME(b, addr);					\
+}
+
+REMAP1(unsigned int, ioread8, /**/)
+REMAP1(unsigned int, ioread16, /**/)
+REMAP1(unsigned int, ioread32, /**/)
+REMAP1(u8, readb, const volatile)
+REMAP1(u16, readw, const volatile)
+REMAP1(u32, readl, const volatile)
+REMAP1(u64, readq, const volatile)
+
+REMAP2(u8, iowrite8, /**/)
+REMAP2(u16, iowrite16, /**/)
+REMAP2(u32, iowrite32, /**/)
+REMAP2(u8, writeb, volatile)
+REMAP2(u16, writew, volatile)
+REMAP2(u32, writel, volatile)
+REMAP2(u64, writeq, volatile)
+
+#undef REMAP1
+#undef REMAP2
+
+extern inline void __iomem *generic_ioportmap(unsigned long a)
+{
+	return alpha_mv.mv_ioportmap(a);
+}
+
+static inline void __iomem *generic_ioremap(unsigned long a, unsigned long s)
+{
+	return alpha_mv.mv_ioremap(a, s);
+}
+
+static inline void generic_iounmap(volatile void __iomem *a)
+{
+	return alpha_mv.mv_iounmap(a);
+}
+
+static inline int generic_is_ioaddr(unsigned long a)
+{
+	return alpha_mv.mv_is_ioaddr(a);
+}
+
+static inline int generic_is_mmio(const volatile void __iomem *a)
+{
+	return alpha_mv.mv_is_mmio(a);
+}
+
+#define __IO_PREFIX		generic
+#define generic_trivial_rw_bw	0
+#define generic_trivial_rw_lq	0
+#define generic_trivial_io_bw	0
+#define generic_trivial_io_lq	0
+#define generic_trivial_iounmap	0
+
+#else
+
+#if defined(CONFIG_ALPHA_APECS)
+# include <asm/core_apecs.h>
+#elif defined(CONFIG_ALPHA_CIA)
+# include <asm/core_cia.h>
+#elif defined(CONFIG_ALPHA_IRONGATE)
+# include <asm/core_irongate.h>
+#elif defined(CONFIG_ALPHA_JENSEN)
+# include <asm/jensen.h>
+#elif defined(CONFIG_ALPHA_LCA)
+# include <asm/core_lca.h>
+#elif defined(CONFIG_ALPHA_MARVEL)
+# include <asm/core_marvel.h>
+#elif defined(CONFIG_ALPHA_MCPCIA)
+# include <asm/core_mcpcia.h>
+#elif defined(CONFIG_ALPHA_POLARIS)
+# include <asm/core_polaris.h>
+#elif defined(CONFIG_ALPHA_T2)
+# include <asm/core_t2.h>
+#elif defined(CONFIG_ALPHA_TSUNAMI)
+# include <asm/core_tsunami.h>
+#elif defined(CONFIG_ALPHA_TITAN)
+# include <asm/core_titan.h>
+#elif defined(CONFIG_ALPHA_WILDFIRE)
+# include <asm/core_wildfire.h>
+#else
+#error "What system is this?"
+#endif
+
+#endif /* GENERIC */
+
+/*
+ * We always have external versions of these routines.
+ */
+extern u8		inb(unsigned long port);
+extern u16		inw(unsigned long port);
+extern u32		inl(unsigned long port);
+extern void		outb(u8 b, unsigned long port);
+extern void		outw(u16 b, unsigned long port);
+extern void		outl(u32 b, unsigned long port);
+
+extern u8		readb(const volatile void __iomem *addr);
+extern u16		readw(const volatile void __iomem *addr);
+extern u32		readl(const volatile void __iomem *addr);
+extern u64		readq(const volatile void __iomem *addr);
+extern void		writeb(u8 b, volatile void __iomem *addr);
+extern void		writew(u16 b, volatile void __iomem *addr);
+extern void		writel(u32 b, volatile void __iomem *addr);
+extern void		writeq(u64 b, volatile void __iomem *addr);
+
+extern u8		__raw_readb(const volatile void __iomem *addr);
+extern u16		__raw_readw(const volatile void __iomem *addr);
+extern u32		__raw_readl(const volatile void __iomem *addr);
+extern u64		__raw_readq(const volatile void __iomem *addr);
+extern void		__raw_writeb(u8 b, volatile void __iomem *addr);
+extern void		__raw_writew(u16 b, volatile void __iomem *addr);
+extern void		__raw_writel(u32 b, volatile void __iomem *addr);
+extern void		__raw_writeq(u64 b, volatile void __iomem *addr);
+
+/*
+ * Mapping from port numbers to __iomem space is pretty easy.
+ */
+
+/* These two have to be extern inline because of the extern prototype from
+   <asm-generic/iomap.h>.  It is not legal to mix "extern" and "static" for
+   the same declaration.  */
+extern inline void __iomem *ioport_map(unsigned long port, unsigned int size)
+{
+	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
+}
+
+extern inline void ioport_unmap(void __iomem *addr)
+{
+}
+
+static inline void __iomem *ioremap(unsigned long port, unsigned long size)
+{
+	return IO_CONCAT(__IO_PREFIX,ioremap) (port, size);
+}
+
+static inline void __iomem *__ioremap(unsigned long port, unsigned long size,
+				      unsigned long flags)
+{
+	return ioremap(port, size);
+}
+
+static inline void __iomem * ioremap_nocache(unsigned long offset,
+					     unsigned long size)
+{
+	return ioremap(offset, size);
+} 
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,iounmap)(addr);
+}
+
+static inline int __is_ioaddr(unsigned long addr)
+{
+	return IO_CONCAT(__IO_PREFIX,is_ioaddr)(addr);
+}
+#define __is_ioaddr(a)		__is_ioaddr((unsigned long)(a))
+
+static inline int __is_mmio(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,is_mmio)(addr);
+}
+
+
+/*
+ * If the actual I/O bits are sufficiently trivial, then expand inline.
+ */
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
+extern inline unsigned int ioread8(void __iomem *addr)
+{
+	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	mb();
+	return ret;
+}
+
+extern inline unsigned int ioread16(void __iomem *addr)
+{
+	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	mb();
+	return ret;
+}
+
+extern inline void iowrite8(u8 b, void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
+	mb();
+}
+
+extern inline void iowrite16(u16 b, void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
+	mb();
+}
+
+extern inline u8 inb(unsigned long port)
+{
+	return ioread8(ioport_map(port, 1));
+}
+
+extern inline u16 inw(unsigned long port)
+{
+	return ioread16(ioport_map(port, 2));
+}
+
+extern inline void outb(u8 b, unsigned long port)
+{
+	iowrite8(b, ioport_map(port, 1));
+}
+
+extern inline void outw(u16 b, unsigned long port)
+{
+	iowrite16(b, ioport_map(port, 2));
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
+extern inline unsigned int ioread32(void __iomem *addr)
+{
+	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	mb();
+	return ret;
+}
+
+extern inline void iowrite32(u32 b, void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
+	mb();
+}
+
+extern inline u32 inl(unsigned long port)
+{
+	return ioread32(ioport_map(port, 4));
+}
+
+extern inline void outl(u32 b, unsigned long port)
+{
+	iowrite32(b, ioport_map(port, 4));
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
+extern inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readb)(addr);
+}
+
+extern inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readw)(addr);
+}
+
+extern inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writeb)(b, addr);
+}
+
+extern inline void __raw_writew(u16 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writew)(b, addr);
+}
+
+extern inline u8 readb(const volatile void __iomem *addr)
+{
+	u8 ret = __raw_readb(addr);
+	mb();
+	return ret;
+}
+
+extern inline u16 readw(const volatile void __iomem *addr)
+{
+	u16 ret = __raw_readw(addr);
+	mb();
+	return ret;
+}
+
+extern inline void writeb(u8 b, volatile void __iomem *addr)
+{
+	__raw_writeb(b, addr);
+	mb();
+}
+
+extern inline void writew(u16 b, volatile void __iomem *addr)
+{
+	__raw_writew(b, addr);
+	mb();
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_rw_lq) == 1
+extern inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readl)(addr);
+}
+
+extern inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	return IO_CONCAT(__IO_PREFIX,readq)(addr);
+}
+
+extern inline void __raw_writel(u32 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writel)(b, addr);
+}
+
+extern inline void __raw_writeq(u64 b, volatile void __iomem *addr)
+{
+	IO_CONCAT(__IO_PREFIX,writeq)(b, addr);
+}
+
+extern inline u32 readl(const volatile void __iomem *addr)
+{
+	u32 ret = __raw_readl(addr);
+	mb();
+	return ret;
+}
+
+extern inline u64 readq(const volatile void __iomem *addr)
+{
+	u64 ret = __raw_readq(addr);
+	mb();
+	return ret;
+}
+
+extern inline void writel(u32 b, volatile void __iomem *addr)
+{
+	__raw_writel(b, addr);
+	mb();
+}
+
+extern inline void writeq(u64 b, volatile void __iomem *addr)
+{
+	__raw_writeq(b, addr);
+	mb();
+}
+#endif
+
+#define inb_p		inb
+#define inw_p		inw
+#define inl_p		inl
+#define outb_p		outb
+#define outw_p		outw
+#define outl_p		outl
+#define readb_relaxed(addr) __raw_readb(addr)
+#define readw_relaxed(addr) __raw_readw(addr)
+#define readl_relaxed(addr) __raw_readl(addr)
+#define readq_relaxed(addr) __raw_readq(addr)
+
+#define mmiowb()
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void memcpy_fromio(void *, const volatile void __iomem *, long);
+extern void memcpy_toio(volatile void __iomem *, const void *, long);
+extern void _memset_c_io(volatile void __iomem *, unsigned long, long);
+
+static inline void memset_io(volatile void __iomem *addr, u8 c, long len)
+{
+	_memset_c_io(addr, 0x0101010101010101UL * c, len);
+}
+
+#define __HAVE_ARCH_MEMSETW_IO
+static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len)
+{
+	_memset_c_io(addr, 0x0001000100010001UL * c, len);
+}
+
+/*
+ * String versions of in/out ops:
+ */
+extern void insb (unsigned long port, void *dst, unsigned long count);
+extern void insw (unsigned long port, void *dst, unsigned long count);
+extern void insl (unsigned long port, void *dst, unsigned long count);
+extern void outsb (unsigned long port, const void *src, unsigned long count);
+extern void outsw (unsigned long port, const void *src, unsigned long count);
+extern void outsl (unsigned long port, const void *src, unsigned long count);
+
+/*
+ * The Alpha Jensen hardware for some rather strange reason puts
+ * the RTC clock at 0x170 instead of 0x70. Probably due to some
+ * misguided idea about using 0x70 for NMI stuff.
+ *
+ * These defines will override the defaults when doing RTC queries
+ */
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define RTC_PORT(x)	((x) + alpha_mv.rtc_port)
+#else
+# ifdef CONFIG_ALPHA_JENSEN
+#  define RTC_PORT(x)	(0x170+(x))
+# else
+#  define RTC_PORT(x)	(0x70 + (x))
+# endif
+#endif
+#define RTC_ALWAYS_BCD	0
+
+/*
+ * Some mucking forons use if[n]def writeq to check if platform has it.
+ * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them
+ * to play with; for now just use cpp anti-recursion logics and make sure
+ * that damn thing is defined and expands to itself.
+ */
+
+#define writeq writeq
+#define readq readq
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_IO_H */
diff --git a/arch/alpha/include/asm/io_trivial.h b/arch/alpha/include/asm/io_trivial.h
new file mode 100644
index 00000000000..1c77f10b4b3
--- /dev/null
+++ b/arch/alpha/include/asm/io_trivial.h
@@ -0,0 +1,131 @@
+/* Trivial implementations of basic i/o routines.  Assumes that all
+   of the hard work has been done by ioremap and ioportmap, and that
+   access to i/o space is linear.  */
+
+/* This file may be included multiple times.  */
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
+__EXTERN_INLINE unsigned int
+IO_CONCAT(__IO_PREFIX,ioread8)(void __iomem *a)
+{
+	return __kernel_ldbu(*(volatile u8 __force *)a);
+}
+
+__EXTERN_INLINE unsigned int
+IO_CONCAT(__IO_PREFIX,ioread16)(void __iomem *a)
+{
+	return __kernel_ldwu(*(volatile u16 __force *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite8)(u8 b, void __iomem *a)
+{
+	__kernel_stb(b, *(volatile u8 __force *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a)
+{
+	__kernel_stw(b, *(volatile u16 __force *)a);
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
+__EXTERN_INLINE unsigned int
+IO_CONCAT(__IO_PREFIX,ioread32)(void __iomem *a)
+{
+	return *(volatile u32 __force *)a;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a)
+{
+	*(volatile u32 __force *)a = b;
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
+__EXTERN_INLINE u8
+IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a)
+{
+	return __kernel_ldbu(*(const volatile u8 __force *)a);
+}
+
+__EXTERN_INLINE u16
+IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a)
+{
+	return __kernel_ldwu(*(const volatile u16 __force *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a)
+{
+	__kernel_stb(b, *(volatile u8 __force *)a);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a)
+{
+	__kernel_stw(b, *(volatile u16 __force *)a);
+}
+#elif IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 2
+__EXTERN_INLINE u8
+IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a)
+{
+	void __iomem *addr = (void __iomem *)a;
+	return IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+}
+
+__EXTERN_INLINE u16
+IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a)
+{
+	void __iomem *addr = (void __iomem *)a;
+	return IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a)
+{
+	void __iomem *addr = (void __iomem *)a;
+	IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a)
+{
+	void __iomem *addr = (void __iomem *)a;
+	IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_rw_lq) == 1
+__EXTERN_INLINE u32
+IO_CONCAT(__IO_PREFIX,readl)(const volatile void __iomem *a)
+{
+	return *(const volatile u32 __force *)a;
+}
+
+__EXTERN_INLINE u64
+IO_CONCAT(__IO_PREFIX,readq)(const volatile void __iomem *a)
+{
+	return *(const volatile u64 __force *)a;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writel)(u32 b, volatile void __iomem *a)
+{
+	*(volatile u32 __force *)a = b;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,writeq)(u64 b, volatile void __iomem *a)
+{
+	*(volatile u64 __force *)a = b;
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_iounmap)
+__EXTERN_INLINE void IO_CONCAT(__IO_PREFIX,iounmap)(volatile void __iomem *a)
+{
+}
+#endif
diff --git a/arch/alpha/include/asm/ioctl.h b/arch/alpha/include/asm/ioctl.h
new file mode 100644
index 00000000000..fc63727f417
--- /dev/null
+++ b/arch/alpha/include/asm/ioctl.h
@@ -0,0 +1,66 @@
+#ifndef _ALPHA_IOCTL_H
+#define _ALPHA_IOCTL_H
+
+/*
+ * The original linux ioctl numbering scheme was just a general
+ * "anything goes" setup, where more or less random numbers were
+ * assigned.  Sorry, I was clueless when I started out on this.
+ *
+ * On the alpha, we'll try to clean it up a bit, using a more sane
+ * ioctl numbering, and also trying to be compatible with OSF/1 in
+ * the process. I'd like to clean it up for the i386 as well, but
+ * it's so painful recognizing both the new and the old numbers..
+ */
+
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+#define _IOC(dir,type,nr,size)			\
+	((unsigned int)				\
+	 (((dir)  << _IOC_DIRSHIFT) |		\
+	  ((type) << _IOC_TYPESHIFT) |		\
+	  ((nr)   << _IOC_NRSHIFT) |		\
+	  ((size) << _IOC_SIZESHIFT)))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode them.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ALPHA_IOCTL_H */
diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h
new file mode 100644
index 00000000000..67bb9f6fdbe
--- /dev/null
+++ b/arch/alpha/include/asm/ioctls.h
@@ -0,0 +1,112 @@
+#ifndef _ASM_ALPHA_IOCTLS_H
+#define _ASM_ALPHA_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+# define TIOCM_OUT1	0x2000
+# define TIOCM_OUT2	0x4000
+# define TIOCM_LOOP	0x8000
+
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
+
+#endif /* _ASM_ALPHA_IOCTLS_H */
diff --git a/arch/alpha/include/asm/ipcbuf.h b/arch/alpha/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..d9c0e1a5070
--- /dev/null
+++ b/arch/alpha/include/asm/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ALPHA_IPCBUF_H
+#define _ALPHA_IPCBUF_H
+
+/* 
+ * The ipc64_perm structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode; 
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ALPHA_IPCBUF_H */
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
new file mode 100644
index 00000000000..06377400dc0
--- /dev/null
+++ b/arch/alpha/include/asm/irq.h
@@ -0,0 +1,91 @@
+#ifndef _ALPHA_IRQ_H
+#define _ALPHA_IRQ_H
+
+/*
+ *	linux/include/alpha/irq.h
+ *
+ *	(C) 1994 Linus Torvalds
+ */
+
+#include <linux/linkage.h>
+
+#if   defined(CONFIG_ALPHA_GENERIC)
+
+/* Here NR_IRQS is not exact, but rather an upper bound.  This is used
+   many places throughout the kernel to size static arrays.  That's ok,
+   we'll use alpha_mv.nr_irqs when we want the real thing.  */
+
+/* When LEGACY_START_ADDRESS is selected, we leave out:
+     TITAN
+     WILDFIRE
+     MARVEL
+
+   This helps keep the kernel object size reasonable for the majority
+   of machines.
+*/
+
+# if defined(CONFIG_ALPHA_LEGACY_START_ADDRESS)
+#  define NR_IRQS      (128)           /* max is RAWHIDE/TAKARA */
+# else
+#  define NR_IRQS      (32768 + 16)    /* marvel - 32 pids */
+# endif
+
+#elif defined(CONFIG_ALPHA_CABRIOLET) || \
+      defined(CONFIG_ALPHA_EB66P)     || \
+      defined(CONFIG_ALPHA_EB164)     || \
+      defined(CONFIG_ALPHA_PC164)     || \
+      defined(CONFIG_ALPHA_LX164)
+# define NR_IRQS	35
+
+#elif defined(CONFIG_ALPHA_EB66)      || \
+      defined(CONFIG_ALPHA_EB64P)     || \
+      defined(CONFIG_ALPHA_MIKASA)
+# define NR_IRQS	32
+
+#elif defined(CONFIG_ALPHA_ALCOR)     || \
+      defined(CONFIG_ALPHA_MIATA)     || \
+      defined(CONFIG_ALPHA_RUFFIAN)   || \
+      defined(CONFIG_ALPHA_RX164)     || \
+      defined(CONFIG_ALPHA_NORITAKE)
+# define NR_IRQS	48
+
+#elif defined(CONFIG_ALPHA_SABLE)     || \
+      defined(CONFIG_ALPHA_SX164)
+# define NR_IRQS	40
+
+#elif defined(CONFIG_ALPHA_DP264) || \
+      defined(CONFIG_ALPHA_LYNX)  || \
+      defined(CONFIG_ALPHA_SHARK) || \
+      defined(CONFIG_ALPHA_EIGER)
+# define NR_IRQS	64
+
+#elif defined(CONFIG_ALPHA_TITAN)
+#define NR_IRQS		80
+
+#elif defined(CONFIG_ALPHA_RAWHIDE) || \
+	defined(CONFIG_ALPHA_TAKARA)
+# define NR_IRQS	128
+
+#elif defined(CONFIG_ALPHA_WILDFIRE)
+# define NR_IRQS	2048 /* enuff for 8 QBBs */
+
+#elif defined(CONFIG_ALPHA_MARVEL)
+# define NR_IRQS	(32768 + 16) 	/* marvel - 32 pids*/
+
+#else /* everyone else */
+# define NR_IRQS	16
+#endif
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	/*
+	 * XXX is this true for all Alpha's?  The old serial driver
+	 * did it this way for years without any complaints, so....
+	 */
+	return ((irq == 2) ? 9 : irq);
+}
+
+struct pt_regs;
+extern void (*perf_irq)(unsigned long, struct pt_regs *);
+
+#endif /* _ALPHA_IRQ_H */
diff --git a/arch/alpha/include/asm/irq_regs.h b/arch/alpha/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/alpha/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h
new file mode 100644
index 00000000000..964b06ead43
--- /dev/null
+++ b/arch/alpha/include/asm/jensen.h
@@ -0,0 +1,346 @@
+#ifndef __ALPHA_JENSEN_H
+#define __ALPHA_JENSEN_H
+
+#include <asm/compiler.h>
+
+/*
+ * Defines for the AlphaPC EISA IO and memory address space.
+ */
+
+/*
+ * NOTE! The memory operations do not set any memory barriers, as it's
+ * not needed for cases like a frame buffer that is essentially memory-like.
+ * You need to do them by hand if the operations depend on ordering.
+ *
+ * Similarly, the port IO operations do a "mb" only after a write operation:
+ * if an mb is needed before (as in the case of doing memory mapped IO
+ * first, and then a port IO operation to the same device), it needs to be
+ * done by hand.
+ *
+ * After the above has bitten me 100 times, I'll give up and just do the
+ * mb all the time, but right now I'm hoping this will work out.  Avoiding
+ * mb's may potentially be a noticeable speed improvement, but I can't
+ * honestly say I've tested it.
+ *
+ * Handling interrupts that need to do mb's to synchronize to non-interrupts
+ * is another fun race area.  Don't do it (because if you do, I'll have to
+ * do *everything* with interrupts disabled, ugh).
+ */
+
+/*
+ * EISA Interrupt Acknowledge address
+ */
+#define EISA_INTA		(IDENT_ADDR + 0x100000000UL)
+
+/*
+ * FEPROM addresses
+ */
+#define EISA_FEPROM0		(IDENT_ADDR + 0x180000000UL)
+#define EISA_FEPROM1		(IDENT_ADDR + 0x1A0000000UL)
+
+/*
+ * VL82C106 base address
+ */
+#define EISA_VL82C106		(IDENT_ADDR + 0x1C0000000UL)
+
+/*
+ * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
+ */
+#define EISA_HAE		(IDENT_ADDR + 0x1D0000000UL)
+
+/*
+ * "SYSCTL" register address
+ */
+#define EISA_SYSCTL		(IDENT_ADDR + 0x1E0000000UL)
+
+/*
+ * "spare" register address
+ */
+#define EISA_SPARE		(IDENT_ADDR + 0x1F0000000UL)
+
+/*
+ * EISA memory address offset
+ */
+#define EISA_MEM		(IDENT_ADDR + 0x200000000UL)
+
+/*
+ * EISA IO address offset
+ */
+#define EISA_IO			(IDENT_ADDR + 0x300000000UL)
+
+
+#ifdef __KERNEL__
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __IO_EXTERN_INLINE
+#endif
+
+/*
+ * Handle the "host address register". This needs to be set
+ * to the high 7 bits of the EISA address.  This is also needed
+ * for EISA IO addresses, which are only 16 bits wide (the
+ * hae needs to be set to 0).
+ *
+ * HAE isn't needed for the local IO operations, though.
+ */
+
+#define JENSEN_HAE_ADDRESS	EISA_HAE
+#define JENSEN_HAE_MASK		0x1ffffff
+
+__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
+{
+	/* hae on the Jensen is bits 31:25 shifted right */
+	addr >>= 25;
+	if (addr != alpha_mv.hae_cache)
+		set_hae(addr);
+}
+
+#define vuip	volatile unsigned int *
+
+/*
+ * IO functions
+ *
+ * The "local" functions are those that don't go out to the EISA bus,
+ * but instead act on the VL82C106 chip directly.. This is mainly the
+ * keyboard, RTC,  printer and first two serial lines..
+ *
+ * The local stuff makes for some complications, but it seems to be
+ * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
+ * convinced that I need one of the newer machines.
+ */
+
+static inline unsigned int jensen_local_inb(unsigned long addr)
+{
+	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
+}
+
+static inline void jensen_local_outb(u8 b, unsigned long addr)
+{
+	*(vuip)((addr << 9) + EISA_VL82C106) = b;
+	mb();
+}
+
+static inline unsigned int jensen_bus_inb(unsigned long addr)
+{
+	long result;
+
+	jensen_set_hae(0);
+	result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
+	return __kernel_extbl(result, addr & 3);
+}
+
+static inline void jensen_bus_outb(u8 b, unsigned long addr)
+{
+	jensen_set_hae(0);
+	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
+	mb();
+}
+
+/*
+ * It seems gcc is not very good at optimizing away logical
+ * operations that result in operations across inline functions.
+ * Which is why this is a macro.
+ */
+
+#define jensen_is_local(addr) ( \
+/* keyboard */	(addr == 0x60 || addr == 0x64) || \
+/* RTC */	(addr == 0x170 || addr == 0x171) || \
+/* mb COM2 */	(addr >= 0x2f8 && addr <= 0x2ff) || \
+/* mb LPT1 */	(addr >= 0x3bc && addr <= 0x3be) || \
+/* mb COM2 */	(addr >= 0x3f8 && addr <= 0x3ff))
+
+__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
+{
+	if (jensen_is_local(addr))
+		return jensen_local_inb(addr);
+	else
+		return jensen_bus_inb(addr);
+}
+
+__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
+{
+	if (jensen_is_local(addr))
+		jensen_local_outb(b, addr);
+	else
+		jensen_bus_outb(b, addr);
+}
+
+__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
+{
+	long result;
+
+	jensen_set_hae(0);
+	result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
+	result >>= (addr & 3) * 8;
+	return 0xffffUL & result;
+}
+
+__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
+{
+	jensen_set_hae(0);
+	return *(vuip) ((addr << 7) + EISA_IO + 0x60);
+}
+
+__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
+{
+	jensen_set_hae(0);
+	*(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
+	mb();
+}
+
+__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
+{
+	jensen_set_hae(0);
+	*(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
+	mb();
+}
+
+/*
+ * Memory functions.
+ */
+
+__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	long result;
+
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
+	result >>= (addr & 3) * 8;
+	return 0xffUL & result;
+}
+
+__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	long result;
+
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
+	result >>= (addr & 3) * 8;
+	return 0xffffUL & result;
+}
+
+__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
+}
+
+__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	unsigned long r0, r1;
+
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	addr = (addr << 7) + EISA_MEM + 0x60;
+	r0 = *(vuip) (addr);
+	r1 = *(vuip) (addr + (4 << 7));
+	return r1 << 32 | r0;
+}
+
+__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	*(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
+}
+
+__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	*(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
+}
+
+__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	*(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
+}
+
+__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	jensen_set_hae(addr);
+	addr &= JENSEN_HAE_MASK;
+	addr = (addr << 7) + EISA_MEM + 0x60;
+	*(vuip) (addr) = b;
+	*(vuip) (addr + (4 << 7)) = b >> 32;
+}
+
+__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
+					     unsigned long size)
+{
+	return (void __iomem *)(addr + 0x100000000ul);
+}
+
+__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
+{
+	return (long)addr >= 0;
+}
+
+__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
+{
+	return (unsigned long)addr >= 0x100000000ul;
+}
+
+/* New-style ioread interface.  All the routines are so ugly for Jensen
+   that it doesn't make sense to merge them.  */
+
+#define IOPORT(OS, NS)							\
+__EXTERN_INLINE unsigned int jensen_ioread##NS(void __iomem *xaddr)	\
+{									\
+	if (jensen_is_mmio(xaddr))					\
+		return jensen_read##OS(xaddr - 0x100000000ul);		\
+	else								\
+		return jensen_in##OS((unsigned long)xaddr);		\
+}									\
+__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr)	\
+{									\
+	if (jensen_is_mmio(xaddr))					\
+		jensen_write##OS(b, xaddr - 0x100000000ul);		\
+	else								\
+		jensen_out##OS(b, (unsigned long)xaddr);		\
+}
+
+IOPORT(b, 8)
+IOPORT(w, 16)
+IOPORT(l, 32)
+
+#undef IOPORT
+
+#undef vuip
+
+#undef __IO_PREFIX
+#define __IO_PREFIX		jensen
+#define jensen_trivial_rw_bw	0
+#define jensen_trivial_rw_lq	0
+#define jensen_trivial_io_bw	0
+#define jensen_trivial_io_lq	0
+#define jensen_trivial_iounmap	1
+#include <asm/io_trivial.h>
+
+#ifdef __IO_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __IO_EXTERN_INLINE
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_JENSEN_H */
diff --git a/arch/alpha/include/asm/kdebug.h b/arch/alpha/include/asm/kdebug.h
new file mode 100644
index 00000000000..6ece1b03766
--- /dev/null
+++ b/arch/alpha/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/alpha/include/asm/kmap_types.h b/arch/alpha/include/asm/kmap_types.h
new file mode 100644
index 00000000000..3e6735a34c5
--- /dev/null
+++ b/arch/alpha/include/asm/kmap_types.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/* Dummy header just to define km_type. */
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/arch/alpha/include/asm/linkage.h b/arch/alpha/include/asm/linkage.h
new file mode 100644
index 00000000000..291c2d01c44
--- /dev/null
+++ b/arch/alpha/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/arch/alpha/include/asm/local.h b/arch/alpha/include/asm/local.h
new file mode 100644
index 00000000000..6ad3ea69642
--- /dev/null
+++ b/arch/alpha/include/asm/local.h
@@ -0,0 +1,118 @@
+#ifndef _ALPHA_LOCAL_H
+#define _ALPHA_LOCAL_H
+
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+typedef struct
+{
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l,i)	atomic_long_set(&(l)->a, (i))
+#define local_inc(l)	atomic_long_inc(&(l)->a)
+#define local_dec(l)	atomic_long_dec(&(l)->a)
+#define local_add(i,l)	atomic_long_add((i),(&(l)->a))
+#define local_sub(i,l)	atomic_long_sub((i),(&(l)->a))
+
+static __inline__ long local_add_return(long i, local_t * l)
+{
+	long temp, result;
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	addq %0,%3,%2\n"
+	"	addq %0,%3,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (l->a.counter), "=&r" (result)
+	:"Ir" (i), "m" (l->a.counter) : "memory");
+	return result;
+}
+
+static __inline__ long local_sub_return(long i, local_t * l)
+{
+	long temp, result;
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%1\n"
+	"	subq %0,%3,%2\n"
+	"	subq %0,%3,%0\n"
+	"	stq_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (l->a.counter), "=&r" (result)
+	:"Ir" (i), "m" (l->a.counter) : "memory");
+	return result;
+}
+
+#define local_cmpxchg(l, o, n) \
+	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to l...
+ * @u: ...unless l is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+#define local_add_unless(l, a, u)				\
+({								\
+	long c, old;						\
+	c = local_read(l);					\
+	for (;;) {						\
+		if (unlikely(c == (u)))				\
+			break;					\
+		old = local_cmpxchg((l), c, c + (a));	\
+		if (likely(old == c))				\
+			break;					\
+		c = old;					\
+	}							\
+	c != (u);						\
+})
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+#define local_add_negative(a, l) (local_add_return((a), (l)) < 0)
+
+#define local_dec_return(l) local_sub_return(1,(l))
+
+#define local_inc_return(l) local_add_return(1,(l))
+
+#define local_sub_and_test(i,l) (local_sub_return((i), (l)) == 0)
+
+#define local_inc_and_test(l) (local_add_return(1, (l)) == 0)
+
+#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0)
+
+/* Verify if faster than atomic ops */
+#define __local_inc(l)		((l)->a.counter++)
+#define __local_dec(l)		((l)->a.counter++)
+#define __local_add(i,l)	((l)->a.counter+=(i))
+#define __local_sub(i,l)	((l)->a.counter-=(i))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+#define cpu_local_read(l)	local_read(&__get_cpu_var(l))
+#define cpu_local_set(l, i)	local_set(&__get_cpu_var(l), (i))
+
+#define cpu_local_inc(l)	local_inc(&__get_cpu_var(l))
+#define cpu_local_dec(l)	local_dec(&__get_cpu_var(l))
+#define cpu_local_add(i, l)	local_add((i), &__get_cpu_var(l))
+#define cpu_local_sub(i, l)	local_sub((i), &__get_cpu_var(l))
+
+#define __cpu_local_inc(l)	__local_inc(&__get_cpu_var(l))
+#define __cpu_local_dec(l)	__local_dec(&__get_cpu_var(l))
+#define __cpu_local_add(i, l)	__local_add((i), &__get_cpu_var(l))
+#define __cpu_local_sub(i, l)	__local_sub((i), &__get_cpu_var(l))
+
+#endif /* _ALPHA_LOCAL_H */
diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
new file mode 100644
index 00000000000..a86c083cdf7
--- /dev/null
+++ b/arch/alpha/include/asm/machvec.h
@@ -0,0 +1,134 @@
+#ifndef __ALPHA_MACHVEC_H
+#define __ALPHA_MACHVEC_H 1
+
+#include <linux/types.h>
+
+/*
+ *	This file gets pulled in by asm/io.h from user space. We don't
+ *	want most of this escaping.
+ */
+ 
+#ifdef __KERNEL__
+
+/* The following structure vectors all of the I/O and IRQ manipulation
+   from the generic kernel to the hardware specific backend.  */
+
+struct task_struct;
+struct mm_struct;
+struct vm_area_struct;
+struct linux_hose_info;
+struct pci_dev;
+struct pci_ops;
+struct pci_controller;
+struct _alpha_agp_info;
+
+struct alpha_machine_vector
+{
+	/* This "belongs" down below with the rest of the runtime
+	   variables, but it is convenient for entry.S if these 
+	   two slots are at the beginning of the struct.  */
+	unsigned long hae_cache;
+	unsigned long *hae_register;
+
+	int nr_irqs;
+	int rtc_port;
+	unsigned int max_asn;
+	unsigned long max_isa_dma_address;
+	unsigned long irq_probe_mask;
+	unsigned long iack_sc;
+	unsigned long min_io_address;
+	unsigned long min_mem_address;
+	unsigned long pci_dac_offset;
+
+	void (*mv_pci_tbi)(struct pci_controller *hose,
+			   dma_addr_t start, dma_addr_t end);
+
+	unsigned int (*mv_ioread8)(void __iomem *);
+	unsigned int (*mv_ioread16)(void __iomem *);
+	unsigned int (*mv_ioread32)(void __iomem *);
+
+	void (*mv_iowrite8)(u8, void __iomem *);
+	void (*mv_iowrite16)(u16, void __iomem *);
+	void (*mv_iowrite32)(u32, void __iomem *);
+
+	u8 (*mv_readb)(const volatile void __iomem *);
+	u16 (*mv_readw)(const volatile void __iomem *);
+	u32 (*mv_readl)(const volatile void __iomem *);
+	u64 (*mv_readq)(const volatile void __iomem *);
+
+	void (*mv_writeb)(u8, volatile void __iomem *);
+	void (*mv_writew)(u16, volatile void __iomem *);
+	void (*mv_writel)(u32, volatile void __iomem *);
+	void (*mv_writeq)(u64, volatile void __iomem *);
+
+	void __iomem *(*mv_ioportmap)(unsigned long);
+	void __iomem *(*mv_ioremap)(unsigned long, unsigned long);
+	void (*mv_iounmap)(volatile void __iomem *);
+	int (*mv_is_ioaddr)(unsigned long);
+	int (*mv_is_mmio)(const volatile void __iomem *);
+
+	void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
+			     struct task_struct *);
+	void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
+
+	void (*mv_flush_tlb_current)(struct mm_struct *);
+	void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
+					  struct vm_area_struct *vma,
+					  unsigned long addr);
+
+	void (*update_irq_hw)(unsigned long, unsigned long, int);
+	void (*ack_irq)(unsigned long);
+	void (*device_interrupt)(unsigned long vector);
+	void (*machine_check)(u64 vector, u64 la);
+
+	void (*smp_callin)(void);
+	void (*init_arch)(void);
+	void (*init_irq)(void);
+	void (*init_rtc)(void);
+	void (*init_pci)(void);
+	void (*kill_arch)(int);
+
+	u8 (*pci_swizzle)(struct pci_dev *, u8 *);
+	int (*pci_map_irq)(struct pci_dev *, u8, u8);
+	struct pci_ops *pci_ops;
+
+	struct _alpha_agp_info *(*agp_info)(void);
+
+	const char *vector_name;
+
+	/* NUMA information */
+	int (*pa_to_nid)(unsigned long);
+	int (*cpuid_to_nid)(int);
+	unsigned long (*node_mem_start)(int);
+	unsigned long (*node_mem_size)(int);
+
+	/* System specific parameters.  */
+	union {
+	    struct {
+		unsigned long gru_int_req_bits;
+	    } cia;
+
+	    struct {
+		unsigned long gamma_bias;
+	    } t2;
+
+	    struct {
+		unsigned int route_tab;
+	    } sio;
+	} sys;
+};
+
+extern struct alpha_machine_vector alpha_mv;
+
+#ifdef CONFIG_ALPHA_GENERIC
+extern int alpha_using_srm;
+#else
+#ifdef CONFIG_ALPHA_SRM
+#define alpha_using_srm 1
+#else
+#define alpha_using_srm 0
+#endif
+#endif /* GENERIC */
+
+#endif
+#endif /* __ALPHA_MACHVEC_H */
diff --git a/arch/alpha/include/asm/mc146818rtc.h b/arch/alpha/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..097703f1c8c
--- /dev/null
+++ b/arch/alpha/include/asm/mc146818rtc.h
@@ -0,0 +1,27 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_ALPHA_MC146818RTC_H
+#define __ASM_ALPHA_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* __ASM_ALPHA_MC146818RTC_H */
diff --git a/arch/alpha/include/asm/md.h b/arch/alpha/include/asm/md.h
new file mode 100644
index 00000000000..6c9b8222a4f
--- /dev/null
+++ b/arch/alpha/include/asm/md.h
@@ -0,0 +1,13 @@
+/* $Id: md.h,v 1.1 1997/12/15 15:11:48 jj Exp $
+ * md.h: High speed xor_block operation for RAID4/5 
+ *
+ */
+ 
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
+
+#endif /* __ASM_MD_H */
diff --git a/arch/alpha/include/asm/mman.h b/arch/alpha/include/asm/mman.h
new file mode 100644
index 00000000000..90d7c35d286
--- /dev/null
+++ b/arch/alpha/include/asm/mman.h
@@ -0,0 +1,54 @@
+#ifndef __ALPHA_MMAN_H__
+#define __ALPHA_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping (OSF/1 is _wrong_) */
+#define MAP_FIXED	0x100		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x10		/* don't use a file */
+
+/* not used by linux, but here to make sure we don't clash with OSF/1 defines */
+#define _MAP_HASSEMAPHORE 0x0200
+#define _MAP_INHERIT	0x0400
+#define _MAP_UNALIGNED	0x0800
+
+/* These are linux-specific */
+#define MAP_GROWSDOWN	0x01000		/* stack-like segment */
+#define MAP_DENYWRITE	0x02000		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x04000		/* mark it as an executable */
+#define MAP_LOCKED	0x08000		/* lock the mapping */
+#define MAP_NORESERVE	0x10000		/* don't check for reservations */
+#define MAP_POPULATE	0x20000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x40000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_SYNC		2		/* synchronous memory sync */
+#define MS_INVALIDATE	4		/* invalidate the caches */
+
+#define MCL_CURRENT	 8192		/* lock all currently mapped pages */
+#define MCL_FUTURE	16384		/* lock all additions to address space */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define	MADV_SPACEAVAIL	5		/* ensure resources are available */
+#define MADV_DONTNEED	6		/* don't need these pages */
+
+/* common/generic parameters */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+
+/* compatibility flags */
+#define MAP_FILE	0
+
+#endif /* __ALPHA_MMAN_H__ */
diff --git a/arch/alpha/include/asm/mmu.h b/arch/alpha/include/asm/mmu.h
new file mode 100644
index 00000000000..3dc12777932
--- /dev/null
+++ b/arch/alpha/include/asm/mmu.h
@@ -0,0 +1,7 @@
+#ifndef __ALPHA_MMU_H
+#define __ALPHA_MMU_H
+
+/* The alpha MMU context is one "unsigned long" bitmap per CPU */
+typedef unsigned long mm_context_t[NR_CPUS];
+
+#endif
diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
new file mode 100644
index 00000000000..86c08a02d23
--- /dev/null
+++ b/arch/alpha/include/asm/mmu_context.h
@@ -0,0 +1,260 @@
+#ifndef __ALPHA_MMU_CONTEXT_H
+#define __ALPHA_MMU_CONTEXT_H
+
+/*
+ * get a new mmu context..
+ *
+ * Copyright (C) 1996, Linus Torvalds
+ */
+
+#include <asm/system.h>
+#include <asm/machvec.h>
+#include <asm/compiler.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * Force a context reload. This is needed when we change the page
+ * table pointer or when we update the ASN of the current process.
+ */
+
+/* Don't get into trouble with dueling __EXTERN_INLINEs.  */
+#ifndef __EXTERN_INLINE
+#include <asm/io.h>
+#endif
+
+
+static inline unsigned long
+__reload_thread(struct pcb_struct *pcb)
+{
+	register unsigned long a0 __asm__("$16");
+	register unsigned long v0 __asm__("$0");
+
+	a0 = virt_to_phys(pcb);
+	__asm__ __volatile__(
+		"call_pal %2 #__reload_thread"
+		: "=r"(v0), "=r"(a0)
+		: "i"(PAL_swpctx), "r"(a0)
+		: "$1", "$22", "$23", "$24", "$25");
+
+	return v0;
+}
+
+
+/*
+ * The maximum ASN's the processor supports.  On the EV4 this is 63
+ * but the PAL-code doesn't actually use this information.  On the
+ * EV5 this is 127, and EV6 has 255.
+ *
+ * On the EV4, the ASNs are more-or-less useless anyway, as they are
+ * only used as an icache tag, not for TB entries.  On the EV5 and EV6,
+ * ASN's also validate the TB entries, and thus make a lot more sense.
+ *
+ * The EV4 ASN's don't even match the architecture manual, ugh.  And
+ * I quote: "If a processor implements address space numbers (ASNs),
+ * and the old PTE has the Address Space Match (ASM) bit clear (ASNs
+ * in use) and the Valid bit set, then entries can also effectively be
+ * made coherent by assigning a new, unused ASN to the currently
+ * running process and not reusing the previous ASN before calling the
+ * appropriate PALcode routine to invalidate the translation buffer (TB)". 
+ *
+ * In short, the EV4 has a "kind of" ASN capability, but it doesn't actually
+ * work correctly and can thus not be used (explaining the lack of PAL-code
+ * support).
+ */
+#define EV4_MAX_ASN 63
+#define EV5_MAX_ASN 127
+#define EV6_MAX_ASN 255
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define MAX_ASN	(alpha_mv.max_asn)
+#else
+# ifdef CONFIG_ALPHA_EV4
+#  define MAX_ASN	EV4_MAX_ASN
+# elif defined(CONFIG_ALPHA_EV5)
+#  define MAX_ASN	EV5_MAX_ASN
+# else
+#  define MAX_ASN	EV6_MAX_ASN
+# endif
+#endif
+
+/*
+ * cpu_last_asn(processor):
+ * 63                                            0
+ * +-------------+----------------+--------------+
+ * | asn version | this processor | hardware asn |
+ * +-------------+----------------+--------------+
+ */
+
+#include <asm/smp.h>
+#ifdef CONFIG_SMP
+#define cpu_last_asn(cpuid)	(cpu_data[cpuid].last_asn)
+#else
+extern unsigned long last_asn;
+#define cpu_last_asn(cpuid)	last_asn
+#endif /* CONFIG_SMP */
+
+#define WIDTH_HARDWARE_ASN	8
+#define ASN_FIRST_VERSION (1UL << WIDTH_HARDWARE_ASN)
+#define HARDWARE_ASN_MASK ((1UL << WIDTH_HARDWARE_ASN) - 1)
+
+/*
+ * NOTE! The way this is set up, the high bits of the "asn_cache" (and
+ * the "mm->context") are the ASN _version_ code. A version of 0 is
+ * always considered invalid, so to invalidate another process you only
+ * need to do "p->mm->context = 0".
+ *
+ * If we need more ASN's than the processor has, we invalidate the old
+ * user TLB's (tbiap()) and start a new ASN version. That will automatically
+ * force a new asn for any other processes the next time they want to
+ * run.
+ */
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __MMU_EXTERN_INLINE
+#endif
+
+extern inline unsigned long
+__get_new_mm_context(struct mm_struct *mm, long cpu)
+{
+	unsigned long asn = cpu_last_asn(cpu);
+	unsigned long next = asn + 1;
+
+	if ((asn & HARDWARE_ASN_MASK) >= MAX_ASN) {
+		tbiap();
+		imb();
+		next = (asn & ~HARDWARE_ASN_MASK) + ASN_FIRST_VERSION;
+	}
+	cpu_last_asn(cpu) = next;
+	return next;
+}
+
+__EXTERN_INLINE void
+ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+	      struct task_struct *next)
+{
+	/* Check if our ASN is of an older version, and thus invalid. */
+	unsigned long asn;
+	unsigned long mmc;
+	long cpu = smp_processor_id();
+
+#ifdef CONFIG_SMP
+	cpu_data[cpu].asn_lock = 1;
+	barrier();
+#endif
+	asn = cpu_last_asn(cpu);
+	mmc = next_mm->context[cpu];
+	if ((mmc ^ asn) & ~HARDWARE_ASN_MASK) {
+		mmc = __get_new_mm_context(next_mm, cpu);
+		next_mm->context[cpu] = mmc;
+	}
+#ifdef CONFIG_SMP
+	else
+		cpu_data[cpu].need_new_asn = 1;
+#endif
+
+	/* Always update the PCB ASN.  Another thread may have allocated
+	   a new mm->context (via flush_tlb_mm) without the ASN serial
+	   number wrapping.  We have no way to detect when this is needed.  */
+	task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK;
+}
+
+__EXTERN_INLINE void
+ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+	      struct task_struct *next)
+{
+	/* As described, ASN's are broken for TLB usage.  But we can
+	   optimize for switching between threads -- if the mm is
+	   unchanged from current we needn't flush.  */
+	/* ??? May not be needed because EV4 PALcode recognizes that
+	   ASN's are broken and does a tbiap itself on swpctx, under
+	   the "Must set ASN or flush" rule.  At least this is true
+	   for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com).
+	   I'm going to leave this here anyway, just to Be Sure.  -- r~  */
+	if (prev_mm != next_mm)
+		tbiap();
+
+	/* Do continue to allocate ASNs, because we can still use them
+	   to avoid flushing the icache.  */
+	ev5_switch_mm(prev_mm, next_mm, next);
+}
+
+extern void __load_new_mm_context(struct mm_struct *);
+
+#ifdef CONFIG_SMP
+#define check_mmu_context()					\
+do {								\
+	int cpu = smp_processor_id();				\
+	cpu_data[cpu].asn_lock = 0;				\
+	barrier();						\
+	if (cpu_data[cpu].need_new_asn) {			\
+		struct mm_struct * mm = current->active_mm;	\
+		cpu_data[cpu].need_new_asn = 0;			\
+		if (!mm->context[cpu])			\
+			__load_new_mm_context(mm);		\
+	}							\
+} while(0)
+#else
+#define check_mmu_context()  do { } while(0)
+#endif
+
+__EXTERN_INLINE void
+ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
+{
+	__load_new_mm_context(next_mm);
+}
+
+__EXTERN_INLINE void
+ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
+{
+	__load_new_mm_context(next_mm);
+	tbiap();
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define switch_mm(a,b,c)	alpha_mv.mv_switch_mm((a),(b),(c))
+# define activate_mm(x,y)	alpha_mv.mv_activate_mm((x),(y))
+#else
+# ifdef CONFIG_ALPHA_EV4
+#  define switch_mm(a,b,c)	ev4_switch_mm((a),(b),(c))
+#  define activate_mm(x,y)	ev4_activate_mm((x),(y))
+# else
+#  define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
+#  define activate_mm(x,y)	ev5_activate_mm((x),(y))
+# endif
+#endif
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int i;
+
+	for_each_online_cpu(i)
+		mm->context[i] = 0;
+	if (tsk != current)
+		task_thread_info(tsk)->pcb.ptbr
+		  = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
+	return 0;
+}
+
+extern inline void
+destroy_context(struct mm_struct *mm)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+	task_thread_info(tsk)->pcb.ptbr
+	  = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
+}
+
+#ifdef __MMU_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __MMU_EXTERN_INLINE
+#endif
+
+#endif /* __ALPHA_MMU_CONTEXT_H */
diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h
new file mode 100644
index 00000000000..8af56ce346a
--- /dev/null
+++ b/arch/alpha/include/asm/mmzone.h
@@ -0,0 +1,115 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ * Adapted for the alpha wildfire architecture Jan 2001.
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/smp.h>
+
+struct bootmem_data_t; /* stupid forward decl. */
+
+/*
+ * Following are macros that are specific to this numa platform.
+ */
+
+extern pg_data_t node_data[];
+
+#define alpha_pa_to_nid(pa)		\
+        (alpha_mv.pa_to_nid 		\
+	 ? alpha_mv.pa_to_nid(pa)	\
+	 : (0))
+#define node_mem_start(nid)		\
+        (alpha_mv.node_mem_start 	\
+	 ? alpha_mv.node_mem_start(nid) \
+	 : (0UL))
+#define node_mem_size(nid)		\
+        (alpha_mv.node_mem_size 	\
+	 ? alpha_mv.node_mem_size(nid) 	\
+	 : ((nid) ? (0UL) : (~0UL)))
+
+#define pa_to_nid(pa)		alpha_pa_to_nid(pa)
+#define NODE_DATA(nid)		(&node_data[(nid)])
+
+#define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
+
+#if 1
+#define PLAT_NODE_DATA_LOCALNR(p, n)	\
+	(((p) >> PAGE_SHIFT) - PLAT_NODE_DATA(n)->gendata.node_start_pfn)
+#else
+static inline unsigned long
+PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
+{
+	unsigned long temp;
+	temp = p >> PAGE_SHIFT;
+	return temp - PLAT_NODE_DATA(n)->gendata.node_start_pfn;
+}
+#endif
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Following are macros that each numa implementation must define.
+ */
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+
+/*
+ * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory
+ * and returns the kaddr corresponding to first physical page in the
+ * node's mem_map.
+ */
+#define LOCAL_BASE_ADDR(kaddr)						  \
+    ((unsigned long)__va(NODE_DATA(kvaddr_to_nid(kaddr))->node_start_pfn  \
+			 << PAGE_SHIFT))
+
+/* XXX: FIXME -- wli */
+#define kern_addr_valid(kaddr)	(0)
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VALID_PAGE(page)	(((page) - mem_map) < max_mapnr)
+
+#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> 32))
+#define pgd_page(pgd)		(pfn_to_page(pgd_val(pgd) >> 32))
+#define pte_pfn(pte)		(pte_val(pte) >> 32)
+
+#define mk_pte(page, pgprot)						     \
+({								 	     \
+	pte_t pte;                                                           \
+	unsigned long pfn;                                                   \
+									     \
+	pfn = page_to_pfn(page) << 32; \
+	pte_val(pte) = pfn | pgprot_val(pgprot);			     \
+									     \
+	pte;								     \
+})
+
+#define pte_page(x)							\
+({									\
+       	unsigned long kvirt;						\
+	struct page * __xx;						\
+									\
+	kvirt = (unsigned long)__va(pte_val(x) >> (32-PAGE_SHIFT));	\
+	__xx = virt_to_page(kvirt);					\
+									\
+	__xx;                                                           \
+})
+
+#define page_to_pa(page)						\
+	(page_to_pfn(page) << PAGE_SHIFT)
+
+#define pfn_to_nid(pfn)		pa_to_nid(((u64)(pfn) << PAGE_SHIFT))
+#define pfn_valid(pfn)							\
+	(((pfn) - node_start_pfn(pfn_to_nid(pfn))) <			\
+	 node_spanned_pages(pfn_to_nid(pfn)))					\
+
+#define virt_addr_valid(kaddr)	pfn_valid((__pa(kaddr) >> PAGE_SHIFT))
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/alpha/include/asm/module.h b/arch/alpha/include/asm/module.h
new file mode 100644
index 00000000000..7b63743c534
--- /dev/null
+++ b/arch/alpha/include/asm/module.h
@@ -0,0 +1,23 @@
+#ifndef _ALPHA_MODULE_H
+#define _ALPHA_MODULE_H
+
+struct mod_arch_specific
+{
+	unsigned int gotsecindex;
+};
+
+#define Elf_Sym Elf64_Sym
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Phdr Elf64_Phdr
+#define Elf_Dyn Elf64_Dyn
+#define Elf_Rel Elf64_Rel
+#define Elf_Rela Elf64_Rela
+
+#define ARCH_SHF_SMALL SHF_ALPHA_GPREL
+
+#ifdef MODULE
+asm(".section .got,\"aws\",@progbits; .align 3; .previous");
+#endif
+
+#endif /*_ALPHA_MODULE_H*/
diff --git a/arch/alpha/include/asm/msgbuf.h b/arch/alpha/include/asm/msgbuf.h
new file mode 100644
index 00000000000..98496501a2b
--- /dev/null
+++ b/arch/alpha/include/asm/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _ALPHA_MSGBUF_H
+#define _ALPHA_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _ALPHA_MSGBUF_H */
diff --git a/arch/alpha/include/asm/mutex.h b/arch/alpha/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/alpha/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h
new file mode 100644
index 00000000000..0995f9d1341
--- /dev/null
+++ b/arch/alpha/include/asm/page.h
@@ -0,0 +1,98 @@
+#ifndef _ALPHA_PAGE_H
+#define _ALPHA_PAGE_H
+
+#include <linux/const.h>
+#include <asm/pal.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	13
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+#define STRICT_MM_TYPECHECKS
+
+extern void clear_page(void *page);
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vmaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+extern void copy_page(void * _to, void * _from);
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)	(x)
+#define pmd_val(x)	(x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+typedef struct page *pgtable_t;
+
+#ifdef USE_48_BIT_KSEG
+#define PAGE_OFFSET		0xffff800000000000UL
+#else
+#define PAGE_OFFSET		0xfffffc0000000000UL
+#endif
+
+#else
+
+#ifdef USE_48_BIT_KSEG
+#define PAGE_OFFSET		0xffff800000000000
+#else
+#define PAGE_OFFSET		0xfffffc0000000000
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+#ifndef CONFIG_DISCONTIGMEM
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#endif /* CONFIG_DISCONTIGMEM */
+
+#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE | VM_EXEC | \
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ALPHA_PAGE_H */
diff --git a/arch/alpha/include/asm/pal.h b/arch/alpha/include/asm/pal.h
new file mode 100644
index 00000000000..9b4ba0d6f00
--- /dev/null
+++ b/arch/alpha/include/asm/pal.h
@@ -0,0 +1,51 @@
+#ifndef __ALPHA_PAL_H
+#define __ALPHA_PAL_H
+
+/*
+ * Common PAL-code
+ */
+#define PAL_halt	  0
+#define PAL_cflush	  1
+#define PAL_draina	  2
+#define PAL_bpt		128
+#define PAL_bugchk	129
+#define PAL_chmk	131
+#define PAL_callsys	131
+#define PAL_imb		134
+#define PAL_rduniq	158
+#define PAL_wruniq	159
+#define PAL_gentrap	170
+#define PAL_nphalt	190
+
+/*
+ * VMS specific PAL-code
+ */
+#define PAL_swppal	10
+#define PAL_mfpr_vptb	41
+
+/*
+ * OSF specific PAL-code
+ */
+#define PAL_cserve	 9
+#define PAL_wripir	13
+#define PAL_rdmces	16
+#define PAL_wrmces	17
+#define PAL_wrfen	43
+#define PAL_wrvptptr	45
+#define PAL_jtopal	46
+#define PAL_swpctx	48
+#define PAL_wrval	49
+#define PAL_rdval	50
+#define PAL_tbi		51
+#define PAL_wrent	52
+#define PAL_swpipl	53
+#define PAL_rdps	54
+#define PAL_wrkgp	55
+#define PAL_wrusp	56
+#define PAL_wrperfmon	57
+#define PAL_rdusp	58
+#define PAL_whami	60
+#define PAL_retsys	61
+#define PAL_rti		63
+
+#endif /* __ALPHA_PAL_H */
diff --git a/arch/alpha/include/asm/param.h b/arch/alpha/include/asm/param.h
new file mode 100644
index 00000000000..e691ecfedb2
--- /dev/null
+++ b/arch/alpha/include/asm/param.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_ALPHA_PARAM_H
+#define _ASM_ALPHA_PARAM_H
+
+/* ??? Gross.  I don't want to parameterize this, and supposedly the
+   hardware ignores reprogramming.  We also need userland buy-in to the 
+   change in HZ, since this is visible in the wait4 resources etc.  */
+
+#ifdef __KERNEL__
+#define HZ		CONFIG_HZ
+#define USER_HZ		HZ
+#else
+#define HZ		1024
+#endif
+
+#define EXEC_PAGESIZE	8192
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
+#endif
+
+#endif /* _ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/asm/parport.h b/arch/alpha/include/asm/parport.h
new file mode 100644
index 00000000000..c5ee7cbb2fc
--- /dev/null
+++ b/arch/alpha/include/asm/parport.h
@@ -0,0 +1,18 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_AXP_PARPORT_H
+#define _ASM_AXP_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASM_AXP_PARPORT_H) */
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
new file mode 100644
index 00000000000..2a14302c17a
--- /dev/null
+++ b/arch/alpha/include/asm/pci.h
@@ -0,0 +1,276 @@
+#ifndef __ALPHA_PCI_H
+#define __ALPHA_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <asm/scatterlist.h>
+#include <asm/machvec.h>
+
+/*
+ * The following structure is used to manage multiple PCI busses.
+ */
+
+struct pci_dev;
+struct pci_bus;
+struct resource;
+struct pci_iommu_arena;
+struct page;
+
+/* A controller.  Used to manage multiple PCI busses.  */
+
+struct pci_controller {
+	struct pci_controller *next;
+        struct pci_bus *bus;
+	struct resource *io_space;
+	struct resource *mem_space;
+
+	/* The following are for reporting to userland.  The invariant is
+	   that if we report a BWX-capable dense memory, we do not report
+	   a sparse memory at all, even if it exists.  */
+	unsigned long sparse_mem_base;
+	unsigned long dense_mem_base;
+	unsigned long sparse_io_base;
+	unsigned long dense_io_base;
+
+	/* This one's for the kernel only.  It's in KSEG somewhere.  */
+	unsigned long config_space_base;
+
+	unsigned int index;
+	/* For compatibility with current (as of July 2003) pciutils
+	   and XFree86. Eventually will be removed. */
+	unsigned int need_domain_info;
+
+	struct pci_iommu_arena *sg_pci;
+	struct pci_iommu_arena *sg_isa;
+
+	void *sysdata;
+};
+
+/* Override the logic in pci_scan_bus for skipping already-configured
+   bus numbers.  */
+
+#define pcibios_assign_all_busses()	1
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		alpha_mv.min_io_address
+#define PCIBIOS_MIN_MEM		alpha_mv.min_mem_address
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+extern inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* IOMMU controls.  */
+
+/* The PCI address space does not equal the physical memory address space.
+   The networking and block device layers use this boolean for bounce buffer
+   decisions.  */
+#define PCI_DMA_BUS_IS_PHYS  0
+
+/* Allocate and map kernel buffer using consistent mode DMA for PCI
+   device.  Returns non-NULL cpu-view pointer to the buffer if
+   successful and sets *DMA_ADDRP to the pci side dma address as well,
+   else DMA_ADDRP is undefined.  */
+
+extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
+				    dma_addr_t *, gfp_t);
+static inline void *
+pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
+{
+	return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
+}
+
+/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
+   be values that were returned from pci_alloc_consistent.  SIZE must
+   be the same as what as passed into pci_alloc_consistent.
+   References to the memory and mappings associated with CPU_ADDR or
+   DMA_ADDR past this call are illegal.  */
+
+extern void pci_free_consistent(struct pci_dev *, size_t, void *, dma_addr_t);
+
+/* Map a single buffer of the indicate size for PCI DMA in streaming mode.
+   The 32-bit PCI bus mastering address to use is returned.  Once the device
+   is given the dma address, the device owns this memory until either
+   pci_unmap_single or pci_dma_sync_single_for_cpu is performed.  */
+
+extern dma_addr_t pci_map_single(struct pci_dev *, void *, size_t, int);
+
+/* Likewise, but for a page instead of an address.  */
+extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
+			       unsigned long, size_t, int);
+
+/* Test for pci_map_single or pci_map_page having generated an error.  */
+
+static inline int
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
+{
+	return dma_addr == 0;
+}
+
+/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
+   SIZE must match what was provided for in a previous pci_map_single
+   call.  All other usages are undefined.  After this call, reads by
+   the cpu to the buffer are guaranteed to see whatever the device
+   wrote there.  */
+
+extern void pci_unmap_single(struct pci_dev *, dma_addr_t, size_t, int);
+extern void pci_unmap_page(struct pci_dev *, dma_addr_t, size_t, int);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/* Map a set of buffers described by scatterlist in streaming mode for
+   PCI DMA.  This is the scatter-gather version of the above
+   pci_map_single interface.  Here the scatter gather list elements
+   are each tagged with the appropriate PCI dma address and length.
+   They are obtained via sg_dma_{address,length}(SG).
+
+   NOTE: An implementation may be able to use a smaller number of DMA
+   address/length pairs than there are SG table elements.  (for
+   example via virtual mapping capabilities) The routine returns the
+   number of addr/length pairs actually used, at most nents.
+
+   Device ownership issues as mentioned above for pci_map_single are
+   the same here.  */
+
+extern int pci_map_sg(struct pci_dev *, struct scatterlist *, int, int);
+
+/* Unmap a set of streaming mode DMA translations.  Again, cpu read
+   rules concerning calls here are the same as for pci_unmap_single()
+   above.  */
+
+extern void pci_unmap_sg(struct pci_dev *, struct scatterlist *, int, int);
+
+/* Make physical memory consistent for a single streaming mode DMA
+   translation after a transfer and device currently has ownership
+   of the buffer.
+
+   If you perform a pci_map_single() but wish to interrogate the
+   buffer using the cpu, yet do not wish to teardown the PCI dma
+   mapping, you must call this function before doing so.  At the next
+   point you give the PCI dma address back to the card, you must first
+   perform a pci_dma_sync_for_device, and then the device again owns
+   the buffer.  */
+
+static inline void
+pci_dma_sync_single_for_cpu(struct pci_dev *dev, dma_addr_t dma_addr,
+			    long size, int direction)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *dev, dma_addr_t dma_addr,
+			       size_t size, int direction)
+{
+	/* Nothing to do.  */
+}
+
+/* Make physical memory consistent for a set of streaming mode DMA
+   translations after a transfer.  The same as pci_dma_sync_single_*
+   but for a scatter-gather list, same rules and usage.  */
+
+static inline void
+pci_dma_sync_sg_for_cpu(struct pci_dev *dev, struct scatterlist *sg,
+			int nents, int direction)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *dev, struct scatterlist *sg,
+			   int nents, int direction)
+{
+	/* Nothing to do.  */
+}
+
+/* Return whether the given PCI device DMA address mask can
+   be supported properly.  For example, if your device can
+   only drive the low 24-bits during PCI bus mastering, then
+   you would pass 0x00ffffff as the mask to this function.  */
+
+extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
+/* TODO: integrate with include/asm-generic/pci.h ? */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+
+extern void pcibios_resource_to_bus(struct pci_dev *, struct pci_bus_region *,
+				    struct resource *);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+				    struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
+struct pci_dev *alpha_gendev_to_pci(struct device *dev);
+
+#endif /* __KERNEL__ */
+
+/* Values for the `which' argument to sys_pciconfig_iobase.  */
+#define IOBASE_HOSE		0
+#define IOBASE_SPARSE_MEM	1
+#define IOBASE_DENSE_MEM	2
+#define IOBASE_SPARSE_IO	3
+#define IOBASE_DENSE_IO		4
+#define IOBASE_ROOT_BUS		5
+#define IOBASE_FROM_HOSE	0x10000
+
+extern struct pci_dev *isa_bridge;
+
+#endif /* __ALPHA_PCI_H */
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
new file mode 100644
index 00000000000..3495e8e00d7
--- /dev/null
+++ b/arch/alpha/include/asm/percpu.h
@@ -0,0 +1,78 @@
+#ifndef __ALPHA_PERCPU_H
+#define __ALPHA_PERCPU_H
+#include <linux/compiler.h>
+#include <linux/threads.h>
+
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+#ifdef CONFIG_SMP
+
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ */
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+#define per_cpu_offset(x) (__per_cpu_offset[x])
+
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#ifdef CONFIG_DEBUG_PREEMPT
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+#ifndef MODULE
+#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
+#define PER_CPU_ATTRIBUTES
+#else
+/*
+ * To calculate addresses of locally defined variables, GCC uses 32-bit
+ * displacement from the GP. Which doesn't work for per cpu variables in
+ * modules, as an offset to the kernel per cpu area is way above 4G.
+ *
+ * This forces allocation of a GOT entry for per cpu variable using
+ * ldq instruction with a 'literal' relocation.
+ */
+#define SHIFT_PERCPU_PTR(var, offset) ({		\
+	extern int simple_identifier_##var(void);	\
+	unsigned long __ptr, tmp_gp;			\
+	asm (  "br	%1, 1f		  	      \n\
+	1:	ldgp	%1, 0(%1)	    	      \n\
+		ldq %0, per_cpu__" #var"(%1)\t!literal"		\
+		: "=&r"(__ptr), "=&r"(tmp_gp));		\
+	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
+
+#define PER_CPU_ATTRIBUTES	__used
+
+#endif /* MODULE */
+
+/*
+ * A percpu variable may point to a discarded regions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) \
+	(*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu)))
+#define __get_cpu_var(var) \
+	(*SHIFT_PERCPU_PTR(var, my_cpu_offset))
+#define __raw_get_cpu_var(var) \
+	(*SHIFT_PERCPU_PTR(var, __my_cpu_offset))
+
+#else /* ! SMP */
+
+#define per_cpu(var, cpu)		(*((void)(cpu), &per_cpu_var(var)))
+#define __get_cpu_var(var)		per_cpu_var(var)
+#define __raw_get_cpu_var(var)		per_cpu_var(var)
+
+#define PER_CPU_ATTRIBUTES
+
+#endif /* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
+
+#endif /* __ALPHA_PERCPU_H */
diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h
new file mode 100644
index 00000000000..fd090155dcc
--- /dev/null
+++ b/arch/alpha/include/asm/pgalloc.h
@@ -0,0 +1,83 @@
+#ifndef _ALPHA_PGALLOC_H
+#define _ALPHA_PGALLOC_H
+
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+
+/*      
+ * Allocate and free page tables. The xxx_kernel() versions are
+ * used to allocate a kernel page table - this turns on ASN bits
+ * if any.
+ */
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte)
+{
+	pmd_set(pmd, (pte_t *)(page_to_pa(pte) + PAGE_OFFSET));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+	pmd_set(pmd, pte);
+}
+
+static inline void
+pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+	pgd_set(pgd, pmd);
+}
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+
+static inline void
+pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+static inline pmd_t *
+pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pmd_t *ret = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return ret;
+}
+
+static inline void
+pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	free_page((unsigned long)pmd);
+}
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+
+static inline void
+pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	pte_t *pte = pte_alloc_one_kernel(mm, address);
+	struct page *page;
+
+	if (!pte)
+		return NULL;
+	page = virt_to_page(pte);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void
+pte_free(struct mm_struct *mm, pgtable_t page)
+{
+	pgtable_page_dtor(page);
+	__free_page(page);
+}
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ALPHA_PGALLOC_H */
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
new file mode 100644
index 00000000000..3f0c59f6d8a
--- /dev/null
+++ b/arch/alpha/include/asm/pgtable.h
@@ -0,0 +1,380 @@
+#ifndef _ALPHA_PGTABLE_H
+#define _ALPHA_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the Alpha page table tree.
+ *
+ * This hopefully works with any standard Alpha page-size, as defined
+ * in <asm/page.h> (currently 8192).
+ */
+#include <linux/mmzone.h>
+
+#include <asm/page.h>
+#include <asm/processor.h>	/* For TASK_SIZE */
+#include <asm/machvec.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+/* Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * Entries per page directory level:  the Alpha is three-level, with
+ * all levels having a one-page page table.
+ */
+#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PMD	(1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PGD	(1UL << (PAGE_SHIFT-3))
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+/* Number of pointers that fit on a page:  this will go away. */
+#define PTRS_PER_PAGE	(1UL << (PAGE_SHIFT-3))
+
+#ifdef CONFIG_ALPHA_LARGE_VMALLOC
+#define VMALLOC_START		0xfffffe0000000000
+#else
+#define VMALLOC_START		(-2*PGDIR_SIZE)
+#endif
+#define VMALLOC_END		(-PGDIR_SIZE)
+
+/*
+ * OSF/1 PAL-code-imposed page table bits
+ */
+#define _PAGE_VALID	0x0001
+#define _PAGE_FOR	0x0002	/* used for page protection (fault on read) */
+#define _PAGE_FOW	0x0004	/* used for page protection (fault on write) */
+#define _PAGE_FOE	0x0008	/* used for page protection (fault on exec) */
+#define _PAGE_ASM	0x0010
+#define _PAGE_KRE	0x0100	/* xxx - see below on the "accessed" bit */
+#define _PAGE_URE	0x0200	/* xxx */
+#define _PAGE_KWE	0x1000	/* used to do the dirty bit in software */
+#define _PAGE_UWE	0x2000	/* used to do the dirty bit in software */
+
+/* .. and these are ours ... */
+#define _PAGE_DIRTY	0x20000
+#define _PAGE_ACCESSED	0x40000
+#define _PAGE_FILE	0x80000	/* set:pagecache, unset:swap */
+
+/*
+ * NOTE! The "accessed" bit isn't necessarily exact:  it can be kept exactly
+ * by software (use the KRE/URE/KWE/UWE bits appropriately), but I'll fake it.
+ * Under Linux/AXP, the "accessed" bit just means "read", and I'll just use
+ * the KRE/URE bits to watch for it. That way we don't need to overload the
+ * KWE/UWE bits with both handling dirty and accessed.
+ *
+ * Note that the kernel uses the accessed bit just to check whether to page
+ * out a page or not, so it doesn't have to be exact anyway.
+ */
+
+#define __DIRTY_BITS	(_PAGE_DIRTY | _PAGE_KWE | _PAGE_UWE)
+#define __ACCESS_BITS	(_PAGE_ACCESSED | _PAGE_KRE | _PAGE_URE)
+
+#define _PFN_MASK	0xFFFFFFFF00000000UL
+
+#define _PAGE_TABLE	(_PAGE_VALID | __DIRTY_BITS | __ACCESS_BITS)
+#define _PAGE_CHG_MASK	(_PFN_MASK | __DIRTY_BITS | __ACCESS_BITS)
+
+/*
+ * All the normal masks have the "page accessed" bits on, as any time they are used,
+ * the page is accessed. They are cleared only by the page-out routines
+ */
+#define PAGE_NONE	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOR | _PAGE_FOW | _PAGE_FOE)
+#define PAGE_SHARED	__pgprot(_PAGE_VALID | __ACCESS_BITS)
+#define PAGE_COPY	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOW)
+#define PAGE_READONLY	__pgprot(_PAGE_VALID | __ACCESS_BITS | _PAGE_FOW)
+#define PAGE_KERNEL	__pgprot(_PAGE_VALID | _PAGE_ASM | _PAGE_KRE | _PAGE_KWE)
+
+#define _PAGE_NORMAL(x) __pgprot(_PAGE_VALID | __ACCESS_BITS | (x))
+
+#define _PAGE_P(x) _PAGE_NORMAL((x) | (((x) & _PAGE_FOW)?0:_PAGE_FOW))
+#define _PAGE_S(x) _PAGE_NORMAL(x)
+
+/*
+ * The hardware can handle write-only mappings, but as the Alpha
+ * architecture does byte-wide writes with a read-modify-write
+ * sequence, it's not practical to have write-without-read privs.
+ * Thus the "-w- -> rw-" and "-wx -> rwx" mapping here (and in
+ * arch/alpha/mm/fault.c)
+ */
+	/* xwr */
+#define __P000	_PAGE_P(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
+#define __P001	_PAGE_P(_PAGE_FOE | _PAGE_FOW)
+#define __P010	_PAGE_P(_PAGE_FOE)
+#define __P011	_PAGE_P(_PAGE_FOE)
+#define __P100	_PAGE_P(_PAGE_FOW | _PAGE_FOR)
+#define __P101	_PAGE_P(_PAGE_FOW)
+#define __P110	_PAGE_P(0)
+#define __P111	_PAGE_P(0)
+
+#define __S000	_PAGE_S(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
+#define __S001	_PAGE_S(_PAGE_FOE | _PAGE_FOW)
+#define __S010	_PAGE_S(_PAGE_FOE)
+#define __S011	_PAGE_S(_PAGE_FOE)
+#define __S100	_PAGE_S(_PAGE_FOW | _PAGE_FOR)
+#define __S101	_PAGE_S(_PAGE_FOW)
+#define __S110	_PAGE_S(0)
+#define __S111	_PAGE_S(0)
+
+/*
+ * pgprot_noncached() is only for infiniband pci support, and a real
+ * implementation for RAM would be more complicated.
+ */
+#define pgprot_noncached(prot)	(prot)
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero:  used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t __bad_page(void);
+extern pmd_t * __bad_pagetable(void);
+
+extern unsigned long __zero_page(void);
+
+#define BAD_PAGETABLE	__bad_pagetable()
+#define BAD_PAGE	__bad_page()
+#define ZERO_PAGE(vaddr)	(virt_to_page(ZERO_PGE))
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR			(8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK			(~(sizeof(void*)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+#define SIZEOF_PTR_LOG2			3
+
+/* to find an entry in a page-table */
+#define PAGE_PTR(address)		\
+  ((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
+
+/*
+ * On certain platforms whose physical address space can overlap KSEG,
+ * namely EV6 and above, we must re-twiddle the physaddr to restore the
+ * correct high-order bits.
+ *
+ * This is extremely confusing until you realize that this is actually
+ * just working around a userspace bug.  The X server was intending to
+ * provide the physical address but instead provided the KSEG address.
+ * Or tried to, except it's not representable.
+ * 
+ * On Tsunami there's nothing meaningful at 0x40000000000, so this is
+ * a safe thing to do.  Come the first core logic that does put something
+ * in this area -- memory or whathaveyou -- then this hack will have
+ * to go away.  So be prepared!
+ */
+
+#if defined(CONFIG_ALPHA_GENERIC) && defined(USE_48_BIT_KSEG)
+#error "EV6-only feature in a generic kernel"
+#endif
+#if defined(CONFIG_ALPHA_GENERIC) || \
+    (defined(CONFIG_ALPHA_EV6) && !defined(USE_48_BIT_KSEG))
+#define KSEG_PFN	(0xc0000000000UL >> PAGE_SHIFT)
+#define PHYS_TWIDDLE(pfn) \
+  ((((pfn) & KSEG_PFN) == (0x40000000000UL >> PAGE_SHIFT)) \
+  ? ((pfn) ^= KSEG_PFN) : (pfn))
+#else
+#define PHYS_TWIDDLE(pfn) (pfn)
+#endif
+
+/*
+ * Conversion functions:  convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#ifndef CONFIG_DISCONTIGMEM
+#define page_to_pa(page)	(((page) - mem_map) << PAGE_SHIFT)
+
+#define pte_pfn(pte)	(pte_val(pte) >> 32)
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+#define mk_pte(page, pgprot)						\
+({									\
+	pte_t pte;							\
+									\
+	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
+	pte;								\
+})
+#endif
+
+extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
+{ pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
+
+extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
+
+extern inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
+{ pmd_val(*pmdp) = _PAGE_TABLE | ((((unsigned long) ptep) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
+
+extern inline void pgd_set(pgd_t * pgdp, pmd_t * pmdp)
+{ pgd_val(*pgdp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
+
+
+extern inline unsigned long
+pmd_page_vaddr(pmd_t pmd)
+{
+	return ((pmd_val(pmd) & _PFN_MASK) >> (32-PAGE_SHIFT)) + PAGE_OFFSET;
+}
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pmd_page(pmd)	(mem_map + ((pmd_val(pmd) & _PFN_MASK) >> 32))
+#define pgd_page(pgd)	(mem_map + ((pgd_val(pgd) & _PFN_MASK) >> 32))
+#endif
+
+extern inline unsigned long pgd_page_vaddr(pgd_t pgd)
+{ return PAGE_OFFSET + ((pgd_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)); }
+
+extern inline int pte_none(pte_t pte)		{ return !pte_val(pte); }
+extern inline int pte_present(pte_t pte)	{ return pte_val(pte) & _PAGE_VALID; }
+extern inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_val(*ptep) = 0;
+}
+
+extern inline int pmd_none(pmd_t pmd)		{ return !pmd_val(pmd); }
+extern inline int pmd_bad(pmd_t pmd)		{ return (pmd_val(pmd) & ~_PFN_MASK) != _PAGE_TABLE; }
+extern inline int pmd_present(pmd_t pmd)	{ return pmd_val(pmd) & _PAGE_VALID; }
+extern inline void pmd_clear(pmd_t * pmdp)	{ pmd_val(*pmdp) = 0; }
+
+extern inline int pgd_none(pgd_t pgd)		{ return !pgd_val(pgd); }
+extern inline int pgd_bad(pgd_t pgd)		{ return (pgd_val(pgd) & ~_PFN_MASK) != _PAGE_TABLE; }
+extern inline int pgd_present(pgd_t pgd)	{ return pgd_val(pgd) & _PAGE_VALID; }
+extern inline void pgd_clear(pgd_t * pgdp)	{ pgd_val(*pgdp) = 0; }
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+extern inline int pte_write(pte_t pte)		{ return !(pte_val(pte) & _PAGE_FOW); }
+extern inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+extern inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+extern inline int pte_special(pte_t pte)	{ return 0; }
+
+extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOW; return pte; }
+extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~(__DIRTY_BITS); return pte; }
+extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~(__ACCESS_BITS); return pte; }
+extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOW; return pte; }
+extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= __DIRTY_BITS; return pte; }
+extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; return pte; }
+extern inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
+
+/*
+ * The smp_read_barrier_depends() in the following functions are required to
+ * order the load of *dir (the pointer in the top level page table) with any
+ * subsequent load of the returned pmd_t *ret (ret is data dependent on *dir).
+ *
+ * If this ordering is not enforced, the CPU might load an older value of
+ * *ret, which may be uninitialized data. See mm/memory.c:__pte_alloc for
+ * more details.
+ *
+ * Note that we never change the mm->pgd pointer after the task is running, so
+ * pgd_offset does not require such a barrier.
+ */
+
+/* Find an entry in the second-level page table.. */
+extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+	pmd_t *ret = (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
+	smp_read_barrier_depends(); /* see above */
+	return ret;
+}
+
+/* Find an entry in the third-level page table.. */
+extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
+{
+	pte_t *ret = (pte_t *) pmd_page_vaddr(*dir)
+		+ ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1));
+	smp_read_barrier_depends(); /* see above */
+	return ret;
+}
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir),(addr))
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir),(addr))
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+extern pgd_t swapper_pg_dir[1024];
+
+/*
+ * The Alpha doesn't have any external MMU info:  the kernel page
+ * tables contain all the necessary information.
+ */
+extern inline void update_mmu_cache(struct vm_area_struct * vma,
+	unsigned long address, pte_t pte)
+{
+}
+
+/*
+ * Non-present pages:  high 24 bits are offset, next 8 bits type,
+ * low 32 bits zero.
+ */
+extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+
+#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_offset(x)		((x).val >> 40)
+#define __swp_entry(type, off)	((swp_entry_t) { pte_val(mk_swap_pte((type), (off))) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 32)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 32) | _PAGE_FILE })
+
+#define PTE_FILE_MAX_BITS	32
+
+#ifndef CONFIG_DISCONTIGMEM
+#define kern_addr_valid(addr)	(1)
+#endif
+
+#define io_remap_pfn_range(vma, start, pfn, size, prot)	\
+		remap_pfn_range(vma, start, pfn, size, prot)
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern void paging_init(void);
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#endif /* _ALPHA_PGTABLE_H */
diff --git a/arch/alpha/include/asm/poll.h b/arch/alpha/include/asm/poll.h
new file mode 100644
index 00000000000..c98509d3149
--- /dev/null
+++ b/arch/alpha/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/alpha/include/asm/posix_types.h b/arch/alpha/include/asm/posix_types.h
new file mode 100644
index 00000000000..db167413300
--- /dev/null
+++ b/arch/alpha/include/asm/posix_types.h
@@ -0,0 +1,123 @@
+#ifndef _ALPHA_POSIX_TYPES_H
+#define _ALPHA_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned long	__kernel_sigset_t;	/* at least 32 bits */
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_timer_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned int	__kernel_old_dev_t;
+
+#ifdef __KERNEL__
+
+#ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			return;
+
+		      case 8:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			return;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* __GNUC__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ALPHA_POSIX_TYPES_H */
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
new file mode 100644
index 00000000000..94afe585930
--- /dev/null
+++ b/arch/alpha/include/asm/processor.h
@@ -0,0 +1,93 @@
+/*
+ * include/asm-alpha/processor.h
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ */
+
+#ifndef __ASM_ALPHA_PROCESSOR_H
+#define __ASM_ALPHA_PROCESSOR_H
+
+#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
+
+/*
+ * Returns current instruction pointer ("program counter").
+ */
+#define current_text_addr() \
+  ({ void *__pc; __asm__ ("br %0,.+4" : "=r"(__pc)); __pc; })
+
+/*
+ * We have a 42-bit user address space: 4TB user VM...
+ */
+#define TASK_SIZE (0x40000000000UL)
+
+#define STACK_TOP \
+  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+
+#define STACK_TOP_MAX	0x00120000000UL
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE \
+  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+/* This is dead.  Everything has been moved to thread_info.  */
+struct thread_struct { };
+#define INIT_THREAD  { }
+
+/* Return saved PC of a blocked thread.  */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* Do necessary setup to start up a newly executed thread.  */
+extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/* Create a kernel thread without removing it from tasklists.  */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
+
+#define KSTK_ESP(tsk) \
+  ((tsk) == current ? rdusp() : task_thread_info(tsk)->pcb.usp)
+
+#define cpu_relax()	barrier()
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+#ifndef CONFIG_SMP
+/* Nothing to prefetch. */
+#define spin_lock_prefetch(lock)  	do { } while (0)
+#endif
+
+extern inline void prefetch(const void *ptr)  
+{ 
+	__builtin_prefetch(ptr, 0, 3);
+}
+
+extern inline void prefetchw(const void *ptr)  
+{
+	__builtin_prefetch(ptr, 1, 3);
+}
+
+#ifdef CONFIG_SMP
+extern inline void spin_lock_prefetch(const void *ptr)  
+{
+	__builtin_prefetch(ptr, 1, 3);
+}
+#endif
+
+#endif /* __ASM_ALPHA_PROCESSOR_H */
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
new file mode 100644
index 00000000000..32c7a5cddd5
--- /dev/null
+++ b/arch/alpha/include/asm/ptrace.h
@@ -0,0 +1,83 @@
+#ifndef _ASMAXP_PTRACE_H
+#define _ASMAXP_PTRACE_H
+
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry
+ *
+ * NOTE! I want to minimize the overhead of system calls, so this
+ * struct has as little information as possible.  I does not have
+ *
+ *  - floating point regs: the kernel doesn't change those
+ *  - r9-15: saved by the C compiler
+ *
+ * This makes "fork()" and "exec()" a bit more complex, but should
+ * give us low system call latency.
+ */
+
+struct pt_regs {
+	unsigned long r0;
+	unsigned long r1;
+	unsigned long r2;
+	unsigned long r3;
+	unsigned long r4;
+	unsigned long r5;
+	unsigned long r6;
+	unsigned long r7;
+	unsigned long r8;
+	unsigned long r19;
+	unsigned long r20;
+	unsigned long r21;
+	unsigned long r22;
+	unsigned long r23;
+	unsigned long r24;
+	unsigned long r25;
+	unsigned long r26;
+	unsigned long r27;
+	unsigned long r28;
+	unsigned long hae;
+/* JRP - These are the values provided to a0-a2 by PALcode */
+	unsigned long trap_a0;
+	unsigned long trap_a1;
+	unsigned long trap_a2;
+/* These are saved by PAL-code: */
+	unsigned long ps;
+	unsigned long pc;
+	unsigned long gp;
+	unsigned long r16;
+	unsigned long r17;
+	unsigned long r18;
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long r26;
+	unsigned long fp[32];	/* fp[31] is fpcr */
+};
+
+#ifdef __KERNEL__
+
+#define user_mode(regs) (((regs)->ps & 8) != 0)
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+
+#define task_pt_regs(task) \
+  ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1)
+
+#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0)
+
+#endif
+
+#endif
diff --git a/arch/alpha/include/asm/reg.h b/arch/alpha/include/asm/reg.h
new file mode 100644
index 00000000000..86ff916fb06
--- /dev/null
+++ b/arch/alpha/include/asm/reg.h
@@ -0,0 +1,52 @@
+#ifndef __reg_h__
+#define __reg_h__
+
+/*
+ * Exception frame offsets.
+ */
+#define EF_V0		0
+#define EF_T0		1
+#define EF_T1		2
+#define EF_T2		3
+#define EF_T3		4
+#define EF_T4		5
+#define EF_T5		6
+#define EF_T6		7
+#define EF_T7		8
+#define EF_S0		9
+#define EF_S1		10
+#define EF_S2		11
+#define EF_S3		12
+#define EF_S4		13
+#define EF_S5		14
+#define EF_S6		15
+#define EF_A3		16
+#define EF_A4		17
+#define EF_A5		18
+#define EF_T8		19
+#define EF_T9		20
+#define EF_T10		21
+#define EF_T11		22
+#define EF_RA		23
+#define EF_T12		24
+#define EF_AT		25
+#define EF_SP		26
+#define EF_PS		27
+#define EF_PC		28
+#define EF_GP		29
+#define EF_A0		30
+#define EF_A1		31
+#define EF_A2		32
+
+#define EF_SIZE		(33*8)
+#define HWEF_SIZE	(6*8)		/* size of PAL frame (PS-A2) */
+
+#define EF_SSIZE	(EF_SIZE - HWEF_SIZE)
+
+/*
+ * Map register number into core file offset.
+ */
+#define CORE_REG(reg, ubase) \
+	(((unsigned long *)((unsigned long)(ubase)))[reg])
+
+#endif /* __reg_h__ */
diff --git a/arch/alpha/include/asm/regdef.h b/arch/alpha/include/asm/regdef.h
new file mode 100644
index 00000000000..142df9c4f8b
--- /dev/null
+++ b/arch/alpha/include/asm/regdef.h
@@ -0,0 +1,44 @@
+#ifndef __alpha_regdef_h__
+#define __alpha_regdef_h__
+
+#define v0	$0	/* function return value */
+
+#define t0	$1	/* temporary registers (caller-saved) */
+#define t1	$2
+#define t2	$3
+#define t3	$4
+#define t4	$5
+#define t5	$6
+#define t6	$7
+#define t7	$8
+
+#define	s0	$9	/* saved-registers (callee-saved registers) */
+#define	s1	$10
+#define	s2	$11
+#define	s3	$12
+#define	s4	$13
+#define	s5	$14
+#define	s6	$15
+#define	fp	s6	/* frame-pointer (s6 in frame-less procedures) */
+
+#define a0	$16	/* argument registers (caller-saved) */
+#define a1	$17
+#define a2	$18
+#define a3	$19
+#define a4	$20
+#define a5	$21
+
+#define t8	$22	/* more temps (caller-saved) */
+#define t9	$23
+#define t10	$24
+#define t11	$25
+#define ra	$26	/* return address register */
+#define t12	$27
+
+#define pv	t12	/* procedure-variable register */
+#define AT	$at	/* assembler temporary */
+#define gp	$29	/* global pointer */
+#define sp	$30	/* stack pointer */
+#define zero	$31	/* reads as zero, writes are noops */
+
+#endif /* __alpha_regdef_h__ */
diff --git a/arch/alpha/include/asm/resource.h b/arch/alpha/include/asm/resource.h
new file mode 100644
index 00000000000..c10874ff597
--- /dev/null
+++ b/arch/alpha/include/asm/resource.h
@@ -0,0 +1,22 @@
+#ifndef _ALPHA_RESOURCE_H
+#define _ALPHA_RESOURCE_H
+
+/*
+ * Alpha/Linux-specific ordering of these four resource limit IDs,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		6	/* max number of open files */
+#define RLIMIT_AS		7	/* address space limit */
+#define RLIMIT_NPROC		8	/* max number of processes */
+#define RLIMIT_MEMLOCK		9	/* max locked-in-memory address space */
+
+/*
+ * SuS says limits have to be unsigned.  Fine, it's unsigned, but
+ * we retain the old value for compatibility, especially with DU. 
+ * When you run into the 2^63 barrier, you call me.
+ */
+#define RLIM_INFINITY		0x7ffffffffffffffful
+
+#include <asm-generic/resource.h>
+
+#endif /* _ALPHA_RESOURCE_H */
diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h
new file mode 100644
index 00000000000..4e854b1333e
--- /dev/null
+++ b/arch/alpha/include/asm/rtc.h
@@ -0,0 +1,10 @@
+#ifndef _ALPHA_RTC_H
+#define _ALPHA_RTC_H
+
+/*
+ * Alpha uses the default access methods for the RTC.
+ */
+
+#include <asm-generic/rtc.h>
+
+#endif
diff --git a/arch/alpha/include/asm/rwsem.h b/arch/alpha/include/asm/rwsem.h
new file mode 100644
index 00000000000..1570c0b5433
--- /dev/null
+++ b/arch/alpha/include/asm/rwsem.h
@@ -0,0 +1,259 @@
+#ifndef _ALPHA_RWSEM_H
+#define _ALPHA_RWSEM_H
+
+/*
+ * Written by Ivan Kokshaysky <ink@jurassic.park.msu.ru>, 2001.
+ * Based on asm-alpha/semaphore.h and asm-i386/rwsem.h
+ */
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct rwsem_waiter;
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	long			count;
+#define RWSEM_UNLOCKED_VALUE		0x0000000000000000L
+#define RWSEM_ACTIVE_BIAS		0x0000000000000001L
+#define RWSEM_ACTIVE_MASK		0x00000000ffffffffL
+#define RWSEM_WAITING_BIAS		(-0x0000000100000000L)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+};
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	LIST_HEAD_INIT((name).wait_list) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	long oldcount;
+#ifndef	CONFIG_SMP
+	oldcount = sem->count;
+	sem->count += RWSEM_ACTIVE_READ_BIAS;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (RWSEM_ACTIVE_READ_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(oldcount < 0))
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	long old, new, res;
+
+	res = sem->count;
+	do {
+		new = res + RWSEM_ACTIVE_READ_BIAS;
+		if (new <= 0)
+			break;
+		old = res;
+		res = cmpxchg(&sem->count, old, new);
+	} while (res != old);
+	return res >= 0 ? 1 : 0;
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	long oldcount;
+#ifndef	CONFIG_SMP
+	oldcount = sem->count;
+	sem->count += RWSEM_ACTIVE_WRITE_BIAS;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(oldcount))
+		rwsem_down_write_failed(sem);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	long ret = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+			   RWSEM_ACTIVE_WRITE_BIAS);
+	if (ret == RWSEM_UNLOCKED_VALUE)
+		return 1;
+	return 0;
+}
+
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	long oldcount;
+#ifndef	CONFIG_SMP
+	oldcount = sem->count;
+	sem->count -= RWSEM_ACTIVE_READ_BIAS;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"	mb\n"
+	"1:	ldq_l	%0,%1\n"
+	"	subq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (RWSEM_ACTIVE_READ_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(oldcount < 0))
+		if ((int)oldcount - RWSEM_ACTIVE_READ_BIAS == 0)
+			rwsem_wake(sem);
+}
+
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	long count;
+#ifndef	CONFIG_SMP
+	sem->count -= RWSEM_ACTIVE_WRITE_BIAS;
+	count = sem->count;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"	mb\n"
+	"1:	ldq_l	%0,%1\n"
+	"	subq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	"	subq	%0,%3,%0\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (count), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (RWSEM_ACTIVE_WRITE_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(count))
+		if ((int)count == 0)
+			rwsem_wake(sem);
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	long oldcount;
+#ifndef	CONFIG_SMP
+	oldcount = sem->count;
+	sem->count -= RWSEM_WAITING_BIAS;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq	%0,%3,%2\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (oldcount), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (-RWSEM_WAITING_BIAS), "m" (sem->count) : "memory");
+#endif
+	if (unlikely(oldcount < 0))
+		rwsem_downgrade_wake(sem);
+}
+
+static inline void rwsem_atomic_add(long val, struct rw_semaphore *sem)
+{
+#ifndef	CONFIG_SMP
+	sem->count += val;
+#else
+	long temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq	%0,%2,%0\n"
+	"	stq_c	%0,%1\n"
+	"	beq	%0,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (sem->count)
+	:"Ir" (val), "m" (sem->count));
+#endif
+}
+
+static inline long rwsem_atomic_update(long val, struct rw_semaphore *sem)
+{
+#ifndef	CONFIG_SMP
+	sem->count += val;
+	return sem->count;
+#else
+	long ret, temp;
+	__asm__ __volatile__(
+	"1:	ldq_l	%0,%1\n"
+	"	addq 	%0,%3,%2\n"
+	"	addq	%0,%3,%0\n"
+	"	stq_c	%2,%1\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	:"=&r" (ret), "=m" (sem->count), "=&r" (temp)
+	:"Ir" (val), "m" (sem->count));
+
+	return ret;
+#endif
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ALPHA_RWSEM_H */
diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h
new file mode 100644
index 00000000000..440747ca634
--- /dev/null
+++ b/arch/alpha/include/asm/scatterlist.h
@@ -0,0 +1,25 @@
+#ifndef _ALPHA_SCATTERLIST_H
+#define _ALPHA_SCATTERLIST_H
+
+#include <asm/page.h>
+#include <asm/types.h>
+  
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+
+	unsigned int length;
+
+	dma_addr_t dma_address;
+	__u32 dma_length;
+};
+
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->dma_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#endif /* !(_ALPHA_SCATTERLIST_H) */
diff --git a/arch/alpha/include/asm/sections.h b/arch/alpha/include/asm/sections.h
new file mode 100644
index 00000000000..43b40edd6e4
--- /dev/null
+++ b/arch/alpha/include/asm/sections.h
@@ -0,0 +1,7 @@
+#ifndef _ALPHA_SECTIONS_H
+#define _ALPHA_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/alpha/include/asm/segment.h b/arch/alpha/include/asm/segment.h
new file mode 100644
index 00000000000..0453d97daae
--- /dev/null
+++ b/arch/alpha/include/asm/segment.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_SEGMENT_H
+#define __ALPHA_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif
diff --git a/arch/alpha/include/asm/sembuf.h b/arch/alpha/include/asm/sembuf.h
new file mode 100644
index 00000000000..7b38b153478
--- /dev/null
+++ b/arch/alpha/include/asm/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ALPHA_SEMBUF_H
+#define _ALPHA_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ALPHA_SEMBUF_H */
diff --git a/arch/alpha/include/asm/serial.h b/arch/alpha/include/asm/serial.h
new file mode 100644
index 00000000000..9d263e8d8cc
--- /dev/null
+++ b/arch/alpha/include/asm/serial.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-alpha/serial.h
+ */
+
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS			\
+	/* UART CLK   PORT IRQ     FLAGS        */			\
+	{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },	/* ttyS0 */	\
+	{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },	/* ttyS1 */	\
+	{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },	/* ttyS2 */	\
+	{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },	/* ttyS3 */
diff --git a/arch/alpha/include/asm/setup.h b/arch/alpha/include/asm/setup.h
new file mode 100644
index 00000000000..2e023a4aa31
--- /dev/null
+++ b/arch/alpha/include/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_SETUP_H
+#define __ALPHA_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+
+#endif
diff --git a/arch/alpha/include/asm/sfp-machine.h b/arch/alpha/include/asm/sfp-machine.h
new file mode 100644
index 00000000000..5fe63afbd47
--- /dev/null
+++ b/arch/alpha/include/asm/sfp-machine.h
@@ -0,0 +1,82 @@
+/* Machine-dependent software floating-point definitions.
+   Alpha kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jakub@redhat.com) and
+		  David S. Miller (davem@redhat.com).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+   
+#define _FP_W_TYPE_SIZE		64
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		_FP_QNANBIT_S
+#define _FP_NANFRAC_D		_FP_QNANBIT_D
+#define _FP_NANFRAC_Q		_FP_QNANBIT_Q
+#define _FP_NANSIGN_S		1
+#define _FP_NANSIGN_D		1
+#define _FP_NANSIGN_Q		1
+
+#define _FP_KEEPNANFRACP 1
+
+/* Alpha Architecture Handbook, 4.7.10.4 sais that
+ * we should prefer any type of NaN in Fb, then Fa.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    R##_s = Y##_s;						\
+    _FP_FRAC_COPY_##wc(R,X);					\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Obtain the current rounding mode. */
+#define FP_ROUNDMODE	mode
+#define FP_RND_NEAREST	(FPCR_DYN_NORMAL >> FPCR_DYN_SHIFT)
+#define FP_RND_ZERO	(FPCR_DYN_CHOPPED >> FPCR_DYN_SHIFT)
+#define FP_RND_PINF	(FPCR_DYN_PLUS >> FPCR_DYN_SHIFT)
+#define FP_RND_MINF	(FPCR_DYN_MINUS >> FPCR_DYN_SHIFT)
+
+/* Exception flags. */
+#define FP_EX_INVALID		IEEE_TRAP_ENABLE_INV
+#define FP_EX_OVERFLOW		IEEE_TRAP_ENABLE_OVF
+#define FP_EX_UNDERFLOW		IEEE_TRAP_ENABLE_UNF
+#define FP_EX_DIVZERO		IEEE_TRAP_ENABLE_DZE
+#define FP_EX_INEXACT		IEEE_TRAP_ENABLE_INE
+#define FP_EX_DENORM		IEEE_TRAP_ENABLE_DNO
+
+#define FP_DENORM_ZERO		(swcr & IEEE_MAP_DMZ)
+
+/* We write the results always */
+#define FP_INHIBIT_RESULTS 0
+
+#endif
diff --git a/arch/alpha/include/asm/shmbuf.h b/arch/alpha/include/asm/shmbuf.h
new file mode 100644
index 00000000000..37ee84f0508
--- /dev/null
+++ b/arch/alpha/include/asm/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ALPHA_SHMBUF_H
+#define _ALPHA_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ALPHA_SHMBUF_H */
diff --git a/arch/alpha/include/asm/shmparam.h b/arch/alpha/include/asm/shmparam.h
new file mode 100644
index 00000000000..cc901d58aeb
--- /dev/null
+++ b/arch/alpha/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASMAXP_SHMPARAM_H
+#define _ASMAXP_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASMAXP_SHMPARAM_H */
diff --git a/arch/alpha/include/asm/sigcontext.h b/arch/alpha/include/asm/sigcontext.h
new file mode 100644
index 00000000000..323cdb02619
--- /dev/null
+++ b/arch/alpha/include/asm/sigcontext.h
@@ -0,0 +1,34 @@
+#ifndef _ASMAXP_SIGCONTEXT_H
+#define _ASMAXP_SIGCONTEXT_H
+
+struct sigcontext {
+	/*
+	 * What should we have here? I'd probably better use the same
+	 * stack layout as OSF/1, just in case we ever want to try
+	 * running their binaries.. 
+	 *
+	 * This is the basic layout, but I don't know if we'll ever
+	 * actually fill in all the values..
+	 */
+	 long		sc_onstack;
+	 long		sc_mask;
+	 long		sc_pc;
+	 long		sc_ps;
+	 long		sc_regs[32];
+	 long		sc_ownedfp;
+	 long		sc_fpregs[32];
+	 unsigned long	sc_fpcr;
+	 unsigned long	sc_fp_control;
+	 unsigned long	sc_reserved1, sc_reserved2;
+	 unsigned long	sc_ssize;
+	 char *		sc_sbase;
+	 unsigned long	sc_traparg_a0;
+	 unsigned long	sc_traparg_a1;
+	 unsigned long	sc_traparg_a2;
+	 unsigned long	sc_fp_trap_pc;
+	 unsigned long	sc_fp_trigger_sum;
+	 unsigned long	sc_fp_trigger_inst;
+};
+
+
+#endif
diff --git a/arch/alpha/include/asm/siginfo.h b/arch/alpha/include/asm/siginfo.h
new file mode 100644
index 00000000000..9822362a842
--- /dev/null
+++ b/arch/alpha/include/asm/siginfo.h
@@ -0,0 +1,9 @@
+#ifndef _ALPHA_SIGINFO_H
+#define _ALPHA_SIGINFO_H
+
+#define __ARCH_SI_PREAMBLE_SIZE		(4 * sizeof(int))
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/alpha/include/asm/signal.h b/arch/alpha/include/asm/signal.h
new file mode 100644
index 00000000000..13c2305d35e
--- /dev/null
+++ b/arch/alpha/include/asm/signal.h
@@ -0,0 +1,172 @@
+#ifndef _ASMAXP_SIGNAL_H
+#define _ASMAXP_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Digital Unix defines 64 signals.  Most things should be clean enough
+   to redefine this at will, if care is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	64
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * Linux/AXP has different signal numbers that Linux/i386: I'm trying
+ * to make it OSF/1 binary compatible, at least for normal binaries.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGEMT		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGBUS		10
+#define SIGSEGV		11
+#define SIGSYS		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG		16
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGINFO		29
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+#define SIGPOLL	SIGIO
+#define SIGPWR	SIGINFO
+#define SIGIOT	SIGABRT
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+
+#define SA_ONSTACK	0x00000001
+#define SA_RESTART	0x00000002
+#define SA_NOCLDSTOP	0x00000004
+#define SA_NODEFER	0x00000008
+#define SA_RESETHAND	0x00000010
+#define SA_NOCLDWAIT	0x00000020
+#define SA_SIGINFO	0x00000040
+
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_NOMASK	SA_NODEFER
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#define SIG_BLOCK          1	/* for blocking signals */
+#define SIG_UNBLOCK        2	/* for unblocking signals */
+#define SIG_SETMASK        3	/* for setting the signal mask */
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct osf_sigaction {
+	__sighandler_t	sa_handler;
+	old_sigset_t	sa_mask;
+	int		sa_flags;
+};
+
+struct sigaction {
+	__sighandler_t	sa_handler;
+	unsigned long	sa_flags;
+	sigset_t	sa_mask;	/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+	__sigrestore_t ka_restorer;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t	_sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t	sa_mask;
+	int		sa_flags;
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+/* sigstack(2) is deprecated, and will be withdrawn in a future version
+   of the X/Open CAE Specification.  Use sigaltstack instead.  It is only
+   implemented here for OSF/1 compatibility.  */
+
+struct sigstack {
+	void __user *ss_sp;
+	int ss_onstack;
+};
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif
+
+#endif
diff --git a/arch/alpha/include/asm/smp.h b/arch/alpha/include/asm/smp.h
new file mode 100644
index 00000000000..544c69af816
--- /dev/null
+++ b/arch/alpha/include/asm/smp.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+#include <asm/pal.h>
+
+/* HACK: Cabrio WHAMI return value is bogus if more than 8 bits used.. :-( */
+
+static __inline__ unsigned char
+__hard_smp_processor_id(void)
+{
+	register unsigned char __r0 __asm__("$0");
+	__asm__ __volatile__(
+		"call_pal %1 #whami"
+		: "=r"(__r0)
+		:"i" (PAL_whami)
+		: "$1", "$22", "$23", "$24", "$25");
+	return __r0;
+}
+
+#ifdef CONFIG_SMP
+
+#include <asm/irq.h>
+
+struct cpuinfo_alpha {
+	unsigned long loops_per_jiffy;
+	unsigned long last_asn;
+	int need_new_asn;
+	int asn_lock;
+	unsigned long ipi_count;
+	unsigned long prof_multiplier;
+	unsigned long prof_counter;
+	unsigned char mcheck_expected;
+	unsigned char mcheck_taken;
+	unsigned char mcheck_extra;
+} __attribute__((aligned(64)));
+
+extern struct cpuinfo_alpha cpu_data[NR_CPUS];
+
+#define PROC_CHANGE_PENALTY     20
+
+#define hard_smp_processor_id()	__hard_smp_processor_id()
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+
+extern int smp_num_cpus;
+#define cpu_possible_map	cpu_present_map
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#else /* CONFIG_SMP */
+
+#define hard_smp_processor_id()		0
+#define smp_call_function_on_cpu(func,info,wait,cpu)    ({ 0; })
+
+#endif /* CONFIG_SMP */
+
+#define NO_PROC_ID	(-1)
+
+#endif
diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
new file mode 100644
index 00000000000..a1057c2d95e
--- /dev/null
+++ b/arch/alpha/include/asm/socket.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+/*
+ * Note: we only bother about making the SOL_SOCKET options
+ * same as OSF/1, as that's all that "normal" programs are
+ * likely to set.  We don't necessarily want to be binary
+ * compatible with _everything_. 
+ */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+
+#define SO_TYPE		0x1008
+#define SO_ERROR	0x1007
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define SO_SNDBUFFORCE	0x100a
+#define SO_RCVBUFFORCE	0x100b
+#define	SO_RCVLOWAT	0x1010
+#define	SO_SNDLOWAT	0x1011
+#define	SO_RCVTIMEO	0x1012
+#define	SO_SNDTIMEO	0x1013
+#define SO_ACCEPTCONN	0x1014
+
+/* linux-specific, might as well be the same as on i386 */
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_BSDCOMPAT	14
+
+#define SO_PASSCRED	17
+#define SO_PEERCRED	18
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		30
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		19
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	20
+#define SO_SECURITY_ENCRYPTION_NETWORK		21
+
+#define SO_MARK			36
+
+/* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
+ * have to define SOCK_NONBLOCK to a different value here.
+ */
+#define SOCK_NONBLOCK	0x40000000
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/alpha/include/asm/sockios.h b/arch/alpha/include/asm/sockios.h
new file mode 100644
index 00000000000..7932c7ab4a4
--- /dev/null
+++ b/arch/alpha/include/asm/sockios.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_ALPHA_SOCKIOS_H
+#define _ASM_ALPHA_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_ALPHA_SOCKIOS_H */
diff --git a/arch/alpha/include/asm/spinlock.h b/arch/alpha/include/asm/spinlock.h
new file mode 100644
index 00000000000..aeeb125f685
--- /dev/null
+++ b/arch/alpha/include/asm/spinlock.h
@@ -0,0 +1,173 @@
+#ifndef _ALPHA_SPINLOCK_H
+#define _ALPHA_SPINLOCK_H
+
+#include <asm/system.h>
+#include <linux/kernel.h>
+#include <asm/current.h>
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define __raw_spin_is_locked(x)	((x)->lock != 0)
+#define __raw_spin_unlock_wait(x) \
+		do { cpu_relax(); } while ((x)->lock)
+
+static inline void __raw_spin_unlock(raw_spinlock_t * lock)
+{
+	mb();
+	lock->lock = 0;
+}
+
+static inline void __raw_spin_lock(raw_spinlock_t * lock)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%0,%1\n"
+	"	bne	%0,2f\n"
+	"	lda	%0,1\n"
+	"	stl_c	%0,%1\n"
+	"	beq	%0,2f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"2:	ldl	%0,%1\n"
+	"	bne	%0,2b\n"
+	"	br	1b\n"
+	".previous"
+	: "=&r" (tmp), "=m" (lock->lock)
+	: "m"(lock->lock) : "memory");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	return !test_and_set_bit(0, &lock->lock);
+}
+
+/***********************************************************/
+
+static inline int __raw_read_can_lock(raw_rwlock_t *lock)
+{
+	return (lock->lock & 1) == 0;
+}
+
+static inline int __raw_write_can_lock(raw_rwlock_t *lock)
+{
+	return lock->lock == 0;
+}
+
+static inline void __raw_read_lock(raw_rwlock_t *lock)
+{
+	long regx;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%1,%0\n"
+	"	blbs	%1,6f\n"
+	"	subl	%1,2,%1\n"
+	"	stl_c	%1,%0\n"
+	"	beq	%1,6f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"6:	ldl	%1,%0\n"
+	"	blbs	%1,6b\n"
+	"	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx)
+	: "m" (*lock) : "memory");
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *lock)
+{
+	long regx;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%1,%0\n"
+	"	bne	%1,6f\n"
+	"	lda	%1,1\n"
+	"	stl_c	%1,%0\n"
+	"	beq	%1,6f\n"
+	"	mb\n"
+	".subsection 2\n"
+	"6:	ldl	%1,%0\n"
+	"	bne	%1,6b\n"
+	"	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx)
+	: "m" (*lock) : "memory");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t * lock)
+{
+	long regx;
+	int success;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%1,%0\n"
+	"	lda	%2,0\n"
+	"	blbs	%1,2f\n"
+	"	subl	%1,2,%2\n"
+	"	stl_c	%2,%0\n"
+	"	beq	%2,6f\n"
+	"2:	mb\n"
+	".subsection 2\n"
+	"6:	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx), "=&r" (success)
+	: "m" (*lock) : "memory");
+
+	return success;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t * lock)
+{
+	long regx;
+	int success;
+
+	__asm__ __volatile__(
+	"1:	ldl_l	%1,%0\n"
+	"	lda	%2,0\n"
+	"	bne	%1,2f\n"
+	"	lda	%2,1\n"
+	"	stl_c	%2,%0\n"
+	"	beq	%2,6f\n"
+	"2:	mb\n"
+	".subsection 2\n"
+	"6:	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx), "=&r" (success)
+	: "m" (*lock) : "memory");
+
+	return success;
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t * lock)
+{
+	long regx;
+	__asm__ __volatile__(
+	"	mb\n"
+	"1:	ldl_l	%1,%0\n"
+	"	addl	%1,2,%1\n"
+	"	stl_c	%1,%0\n"
+	"	beq	%1,6f\n"
+	".subsection 2\n"
+	"6:	br	1b\n"
+	".previous"
+	: "=m" (*lock), "=&r" (regx)
+	: "m" (*lock) : "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t * lock)
+{
+	mb();
+	lock->lock = 0;
+}
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* _ALPHA_SPINLOCK_H */
diff --git a/arch/alpha/include/asm/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..8141eb5ebf0
--- /dev/null
+++ b/arch/alpha/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ALPHA_SPINLOCK_TYPES_H
+#define _ALPHA_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/alpha/include/asm/stat.h b/arch/alpha/include/asm/stat.h
new file mode 100644
index 00000000000..07ad3e6b3f3
--- /dev/null
+++ b/arch/alpha/include/asm/stat.h
@@ -0,0 +1,48 @@
+#ifndef _ALPHA_STAT_H
+#define _ALPHA_STAT_H
+
+struct stat {
+	unsigned int	st_dev;
+	unsigned int	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	st_rdev;
+	long		st_size;
+	unsigned long	st_atime;
+	unsigned long	st_mtime;
+	unsigned long	st_ctime;
+	unsigned int	st_blksize;
+	unsigned int	st_blocks;
+	unsigned int	st_flags;
+	unsigned int	st_gen;
+};
+
+/* The stat64 structure increases the size of dev_t, blkcnt_t, adds
+   nanosecond resolution times, and padding for expansion.  */
+
+struct stat64 {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_rdev;
+	long		st_size;
+	unsigned long	st_blocks;
+
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	st_blksize;
+	unsigned int	st_nlink;
+	unsigned int	__pad0;
+
+	unsigned long	st_atime;
+	unsigned long 	st_atime_nsec; 
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long   st_ctime_nsec;
+  	long		__unused[3];
+};
+
+#endif
diff --git a/arch/alpha/include/asm/statfs.h b/arch/alpha/include/asm/statfs.h
new file mode 100644
index 00000000000..ad15830baef
--- /dev/null
+++ b/arch/alpha/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _ALPHA_STATFS_H
+#define _ALPHA_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/arch/alpha/include/asm/string.h b/arch/alpha/include/asm/string.h
new file mode 100644
index 00000000000..b02b8a28294
--- /dev/null
+++ b/arch/alpha/include/asm/string.h
@@ -0,0 +1,66 @@
+#ifndef __ALPHA_STRING_H__
+#define __ALPHA_STRING_H__
+
+#ifdef __KERNEL__
+
+/*
+ * GCC of any recent vintage doesn't do stupid things with bcopy.
+ * EGCS 1.1 knows all about expanding memcpy inline, others don't.
+ *
+ * Similarly for a memset with data = 0.
+ */
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, size_t);
+#define __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, size_t);
+
+/* For backward compatibility with modules.  Unused otherwise.  */
+extern void * __memcpy(void *, const void *, size_t);
+
+#define memcpy __builtin_memcpy
+
+#define __HAVE_ARCH_MEMSET
+extern void * __constant_c_memset(void *, unsigned long, size_t);
+extern void * __memset(void *, int, size_t);
+extern void * memset(void *, int, size_t);
+
+#define memset(s, c, n)							    \
+(__builtin_constant_p(c)						    \
+ ? (__builtin_constant_p(n) && (c) == 0					    \
+    ? __builtin_memset((s),0,(n)) 					    \
+    : __constant_c_memset((s),0x0101010101010101UL*(unsigned char)(c),(n))) \
+ : __memset((s),(c),(n)))
+
+#define __HAVE_ARCH_STRCPY
+extern char * strcpy(char *,const char *);
+#define __HAVE_ARCH_STRNCPY
+extern char * strncpy(char *, const char *, size_t);
+#define __HAVE_ARCH_STRCAT
+extern char * strcat(char *, const char *);
+#define __HAVE_ARCH_STRNCAT
+extern char * strncat(char *, const char *, size_t);
+#define __HAVE_ARCH_STRCHR
+extern char * strchr(const char *,int);
+#define __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char *,int);
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+#define __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, size_t);
+
+/* The following routine is like memset except that it writes 16-bit
+   aligned values.  The DEST and COUNT parameters must be even for 
+   correct operation.  */
+
+#define __HAVE_ARCH_MEMSETW
+extern void * __memsetw(void *dest, unsigned short, size_t count);
+
+#define memsetw(s, c, n)						 \
+(__builtin_constant_p(c)						 \
+ ? __constant_c_memset((s),0x0001000100010001UL*(unsigned short)(c),(n)) \
+ : __memsetw((s),(c),(n)))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ALPHA_STRING_H__ */
diff --git a/arch/alpha/include/asm/suspend.h b/arch/alpha/include/asm/suspend.h
new file mode 100644
index 00000000000..c7042d57585
--- /dev/null
+++ b/arch/alpha/include/asm/suspend.h
@@ -0,0 +1,6 @@
+#ifndef __ALPHA_SUSPEND_H
+#define __ALPHA_SUSPEND_H
+
+/* Dummy include. */
+
+#endif  /* __ALPHA_SUSPEND_H */
diff --git a/arch/alpha/include/asm/sysinfo.h b/arch/alpha/include/asm/sysinfo.h
new file mode 100644
index 00000000000..086aba284df
--- /dev/null
+++ b/arch/alpha/include/asm/sysinfo.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-alpha/sysinfo.h
+ */
+
+#ifndef __ASM_ALPHA_SYSINFO_H
+#define __ASM_ALPHA_SYSINFO_H
+
+/* This defines the subset of the OSF/1 getsysinfo/setsysinfo calls
+   that we support.  */
+
+#define GSI_UACPROC			8
+#define GSI_IEEE_FP_CONTROL		45
+#define GSI_IEEE_STATE_AT_SIGNAL	46
+#define GSI_PROC_TYPE			60
+#define GSI_GET_HWRPB			101
+
+#define SSI_NVPAIRS			1
+#define SSI_IEEE_FP_CONTROL		14
+#define SSI_IEEE_STATE_AT_SIGNAL	15
+#define SSI_IEEE_IGNORE_STATE_AT_SIGNAL	16
+#define SSI_IEEE_RAISE_EXCEPTION	1001	/* linux specific */
+
+#define SSIN_UACPROC			6
+
+#define UAC_BITMASK			7
+#define UAC_NOPRINT			1
+#define UAC_NOFIX			2
+#define UAC_SIGBUS			4
+
+
+#ifdef __KERNEL__
+
+/* This is the shift that is applied to the UAC bits as stored in the
+   per-thread flags.  See thread_info.h.  */
+#define UAC_SHIFT			6
+
+#endif
+
+#endif /* __ASM_ALPHA_SYSINFO_H */
diff --git a/arch/alpha/include/asm/system.h b/arch/alpha/include/asm/system.h
new file mode 100644
index 00000000000..afe20fa58c9
--- /dev/null
+++ b/arch/alpha/include/asm/system.h
@@ -0,0 +1,829 @@
+#ifndef __ALPHA_SYSTEM_H
+#define __ALPHA_SYSTEM_H
+
+#include <asm/pal.h>
+#include <asm/page.h>
+#include <asm/barrier.h>
+
+/*
+ * System defines.. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.
+ */
+
+/*
+ * We leave one page for the initial stack page, and one page for
+ * the initial process structure. Also, the console eats 3 MB for
+ * the initial bootloader (one of which we can reclaim later).
+ */
+#define BOOT_PCB	0x20000000
+#define BOOT_ADDR	0x20000000
+/* Remove when official MILO sources have ELF support: */
+#define BOOT_SIZE	(16*1024)
+
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
+#else
+#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
+#endif
+
+#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
+#define SWAPPER_PGD	KERNEL_START
+#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
+#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
+#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
+#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
+
+#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
+
+/*
+ * This is setup by the secondary bootstrap loader.  Because
+ * the zero page is zeroed out as soon as the vm system is
+ * initialized, we need to copy things out into a more permanent
+ * place.
+ */
+#define PARAM			ZERO_PGE
+#define COMMAND_LINE		((char*)(PARAM + 0x0000))
+#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
+#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#define AT_VECTOR_SIZE_ARCH 4 /* entries in ARCH_DLINFO */
+
+/*
+ * This is the logout header that should be common to all platforms
+ * (assuming they are running OSF/1 PALcode, I guess).
+ */
+struct el_common {
+	unsigned int	size;		/* size in bytes of logout area */
+	unsigned int	sbz1	: 30;	/* should be zero */
+	unsigned int	err2	:  1;	/* second error */
+	unsigned int	retry	:  1;	/* retry flag */
+	unsigned int	proc_offset;	/* processor-specific offset */
+	unsigned int	sys_offset;	/* system-specific offset */
+	unsigned int	code;		/* machine check code */
+	unsigned int	frame_rev;	/* frame revision */
+};
+
+/* Machine Check Frame for uncorrectable errors (Large format)
+ *      --- This is used to log uncorrectable errors such as
+ *          double bit ECC errors.
+ *      --- These errors are detected by both processor and systems.
+ */
+struct el_common_EV5_uncorrectable_mcheck {
+        unsigned long   shadow[8];        /* Shadow reg. 8-14, 25           */
+        unsigned long   paltemp[24];      /* PAL TEMP REGS.                 */
+        unsigned long   exc_addr;         /* Address of excepting instruction*/
+        unsigned long   exc_sum;          /* Summary of arithmetic traps.   */
+        unsigned long   exc_mask;         /* Exception mask (from exc_sum). */
+        unsigned long   pal_base;         /* Base address for PALcode.      */
+        unsigned long   isr;              /* Interrupt Status Reg.          */
+        unsigned long   icsr;             /* CURRENT SETUP OF EV5 IBOX      */
+        unsigned long   ic_perr_stat;     /* I-CACHE Reg. <11> set Data parity
+                                                         <12> set TAG parity*/
+        unsigned long   dc_perr_stat;     /* D-CACHE error Reg. Bits set to 1:
+                                                     <2> Data error in bank 0
+                                                     <3> Data error in bank 1
+                                                     <4> Tag error in bank 0
+                                                     <5> Tag error in bank 1 */
+        unsigned long   va;               /* Effective VA of fault or miss. */
+        unsigned long   mm_stat;          /* Holds the reason for D-stream 
+                                             fault or D-cache parity errors */
+        unsigned long   sc_addr;          /* Address that was being accessed
+                                             when EV5 detected Secondary cache
+                                             failure.                 */
+        unsigned long   sc_stat;          /* Helps determine if the error was
+                                             TAG/Data parity(Secondary Cache)*/
+        unsigned long   bc_tag_addr;      /* Contents of EV5 BC_TAG_ADDR    */
+        unsigned long   ei_addr;          /* Physical address of any transfer
+                                             that is logged in EV5 EI_STAT */
+        unsigned long   fill_syndrome;    /* For correcting ECC errors.     */
+        unsigned long   ei_stat;          /* Helps identify reason of any 
+                                             processor uncorrectable error
+                                             at its external interface.     */
+        unsigned long   ld_lock;          /* Contents of EV5 LD_LOCK register*/
+};
+
+struct el_common_EV6_mcheck {
+	unsigned int FrameSize;		/* Bytes, including this field */
+	unsigned int FrameFlags;	/* <31> = Retry, <30> = Second Error */
+	unsigned int CpuOffset;		/* Offset to CPU-specific info */
+	unsigned int SystemOffset;	/* Offset to system-specific info */
+	unsigned int MCHK_Code;
+	unsigned int MCHK_Frame_Rev;
+	unsigned long I_STAT;		/* EV6 Internal Processor Registers */
+	unsigned long DC_STAT;		/* (See the 21264 Spec) */
+	unsigned long C_ADDR;
+	unsigned long DC1_SYNDROME;
+	unsigned long DC0_SYNDROME;
+	unsigned long C_STAT;
+	unsigned long C_STS;
+	unsigned long MM_STAT;
+	unsigned long EXC_ADDR;
+	unsigned long IER_CM;
+	unsigned long ISUM;
+	unsigned long RESERVED0;
+	unsigned long PAL_BASE;
+	unsigned long I_CTL;
+	unsigned long PCTX;
+};
+
+extern void halt(void) __attribute__((noreturn));
+#define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt))
+
+#define switch_to(P,N,L)						 \
+  do {									 \
+    (L) = alpha_switch_to(virt_to_phys(&task_thread_info(N)->pcb), (P)); \
+    check_mmu_context();						 \
+  } while (0)
+
+struct task_struct;
+extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*);
+
+#define imb() \
+__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")
+
+#define draina() \
+__asm__ __volatile__ ("call_pal %0 #draina" : : "i" (PAL_draina) : "memory")
+
+enum implver_enum {
+	IMPLVER_EV4,
+	IMPLVER_EV5,
+	IMPLVER_EV6
+};
+
+#ifdef CONFIG_ALPHA_GENERIC
+#define implver()				\
+({ unsigned long __implver;			\
+   __asm__ ("implver %0" : "=r"(__implver));	\
+   (enum implver_enum) __implver; })
+#else
+/* Try to eliminate some dead code.  */
+#ifdef CONFIG_ALPHA_EV4
+#define implver() IMPLVER_EV4
+#endif
+#ifdef CONFIG_ALPHA_EV5
+#define implver() IMPLVER_EV5
+#endif
+#if defined(CONFIG_ALPHA_EV6)
+#define implver() IMPLVER_EV6
+#endif
+#endif
+
+enum amask_enum {
+	AMASK_BWX = (1UL << 0),
+	AMASK_FIX = (1UL << 1),
+	AMASK_CIX = (1UL << 2),
+	AMASK_MAX = (1UL << 8),
+	AMASK_PRECISE_TRAP = (1UL << 9),
+};
+
+#define amask(mask)						\
+({ unsigned long __amask, __input = (mask);			\
+   __asm__ ("amask %1,%0" : "=r"(__amask) : "rI"(__input));	\
+   __amask; })
+
+#define __CALL_PAL_R0(NAME, TYPE)				\
+extern inline TYPE NAME(void)					\
+{								\
+	register TYPE __r0 __asm__("$0");			\
+	__asm__ __volatile__(					\
+		"call_pal %1 # " #NAME				\
+		:"=r" (__r0)					\
+		:"i" (PAL_ ## NAME)				\
+		:"$1", "$16", "$22", "$23", "$24", "$25");	\
+	return __r0;						\
+}
+
+#define __CALL_PAL_W1(NAME, TYPE0)				\
+extern inline void NAME(TYPE0 arg0)				\
+{								\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	__asm__ __volatile__(					\
+		"call_pal %1 # "#NAME				\
+		: "=r"(__r16)					\
+		: "i"(PAL_ ## NAME), "0"(__r16)			\
+		: "$1", "$22", "$23", "$24", "$25");		\
+}
+
+#define __CALL_PAL_W2(NAME, TYPE0, TYPE1)			\
+extern inline void NAME(TYPE0 arg0, TYPE1 arg1)			\
+{								\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	register TYPE1 __r17 __asm__("$17") = arg1;		\
+	__asm__ __volatile__(					\
+		"call_pal %2 # "#NAME				\
+		: "=r"(__r16), "=r"(__r17)			\
+		: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17)	\
+		: "$1", "$22", "$23", "$24", "$25");		\
+}
+
+#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0)			\
+extern inline RTYPE NAME(TYPE0 arg0)				\
+{								\
+	register RTYPE __r0 __asm__("$0");			\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	__asm__ __volatile__(					\
+		"call_pal %2 # "#NAME				\
+		: "=r"(__r16), "=r"(__r0)			\
+		: "i"(PAL_ ## NAME), "0"(__r16)			\
+		: "$1", "$22", "$23", "$24", "$25");		\
+	return __r0;						\
+}
+
+#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1)		\
+extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1)		\
+{								\
+	register RTYPE __r0 __asm__("$0");			\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	register TYPE1 __r17 __asm__("$17") = arg1;		\
+	__asm__ __volatile__(					\
+		"call_pal %3 # "#NAME				\
+		: "=r"(__r16), "=r"(__r17), "=r"(__r0)		\
+		: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17)	\
+		: "$1", "$22", "$23", "$24", "$25");		\
+	return __r0;						\
+}
+
+__CALL_PAL_W1(cflush, unsigned long);
+__CALL_PAL_R0(rdmces, unsigned long);
+__CALL_PAL_R0(rdps, unsigned long);
+__CALL_PAL_R0(rdusp, unsigned long);
+__CALL_PAL_RW1(swpipl, unsigned long, unsigned long);
+__CALL_PAL_R0(whami, unsigned long);
+__CALL_PAL_W2(wrent, void*, unsigned long);
+__CALL_PAL_W1(wripir, unsigned long);
+__CALL_PAL_W1(wrkgp, unsigned long);
+__CALL_PAL_W1(wrmces, unsigned long);
+__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
+__CALL_PAL_W1(wrusp, unsigned long);
+__CALL_PAL_W1(wrvptptr, unsigned long);
+
+#define IPL_MIN		0
+#define IPL_SW0		1
+#define IPL_SW1		2
+#define IPL_DEV0	3
+#define IPL_DEV1	4
+#define IPL_TIMER	5
+#define IPL_PERF	6
+#define IPL_POWERFAIL	6
+#define IPL_MCHECK	7
+#define IPL_MAX		7
+
+#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
+#undef IPL_MIN
+#define IPL_MIN		__min_ipl
+extern int __min_ipl;
+#endif
+
+#define getipl()		(rdps() & 7)
+#define setipl(ipl)		((void) swpipl(ipl))
+
+#define local_irq_disable()			do { setipl(IPL_MAX); barrier(); } while(0)
+#define local_irq_enable()			do { barrier(); setipl(IPL_MIN); } while(0)
+#define local_save_flags(flags)	((flags) = rdps())
+#define local_irq_save(flags)	do { (flags) = swpipl(IPL_MAX); barrier(); } while(0)
+#define local_irq_restore(flags)	do { barrier(); setipl(flags); barrier(); } while(0)
+
+#define irqs_disabled()	(getipl() == IPL_MAX)
+
+/*
+ * TB routines..
+ */
+#define __tbi(nr,arg,arg1...)					\
+({								\
+	register unsigned long __r16 __asm__("$16") = (nr);	\
+	register unsigned long __r17 __asm__("$17"); arg;	\
+	__asm__ __volatile__(					\
+		"call_pal %3 #__tbi"				\
+		:"=r" (__r16),"=r" (__r17)			\
+		:"0" (__r16),"i" (PAL_tbi) ,##arg1		\
+		:"$0", "$1", "$22", "$23", "$24", "$25");	\
+})
+
+#define tbi(x,y)	__tbi(x,__r17=(y),"1" (__r17))
+#define tbisi(x)	__tbi(1,__r17=(x),"1" (__r17))
+#define tbisd(x)	__tbi(2,__r17=(x),"1" (__r17))
+#define tbis(x)		__tbi(3,__r17=(x),"1" (__r17))
+#define tbiap()		__tbi(-1, /* no second argument */)
+#define tbia()		__tbi(-2, /* no second argument */)
+
+/*
+ * Atomic exchange.
+ * Since it can be used to implement critical sections
+ * it must clobber "memory" (also for interrupts in UP).
+ */
+
+static inline unsigned long
+__xchg_u8(volatile char *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	insbl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extbl	%2,%4,%0\n"
+	"	mskbl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+__xchg_u16(volatile short *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	inswl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extwl	%2,%4,%0\n"
+	"	mskwl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+__xchg_u32(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+static inline unsigned long
+__xchg_u64(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size) \
+({ \
+	unsigned long __xchg__res; \
+	volatile void *__xchg__ptr = (ptr); \
+	switch (size) { \
+		case 1: __xchg__res = __xchg_u8(__xchg__ptr, x); break; \
+		case 2: __xchg__res = __xchg_u16(__xchg__ptr, x); break; \
+		case 4: __xchg__res = __xchg_u32(__xchg__ptr, x); break; \
+		case 8: __xchg__res = __xchg_u64(__xchg__ptr, x); break; \
+		default: __xchg_called_with_bad_pointer(); __xchg__res = x; \
+	} \
+	__xchg__res; \
+})
+
+#define xchg(ptr,x)							     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+  })
+
+static inline unsigned long
+__xchg_u8_local(volatile char *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	insbl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extbl	%2,%4,%0\n"
+	"	mskbl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+__xchg_u16_local(volatile short *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	inswl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extwl	%2,%4,%0\n"
+	"	mskwl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+__xchg_u32_local(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+static inline unsigned long
+__xchg_u64_local(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+#define __xchg_local(ptr, x, size) \
+({ \
+	unsigned long __xchg__res; \
+	volatile void *__xchg__ptr = (ptr); \
+	switch (size) { \
+		case 1: __xchg__res = __xchg_u8_local(__xchg__ptr, x); break; \
+		case 2: __xchg__res = __xchg_u16_local(__xchg__ptr, x); break; \
+		case 4: __xchg__res = __xchg_u32_local(__xchg__ptr, x); break; \
+		case 8: __xchg__res = __xchg_u64_local(__xchg__ptr, x); break; \
+		default: __xchg_called_with_bad_pointer(); __xchg__res = x; \
+	} \
+	__xchg__res; \
+})
+
+#define xchg_local(ptr,x)						     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	     \
+     		sizeof(*(ptr))); \
+  })
+
+/* 
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ *
+ * The memory barrier should be placed in SMP only when we actually
+ * make the change. If we don't change anything (so if the returned
+ * prev is equal to old) then we aren't acquiring anything new and
+ * we don't need any memory barrier as far I can tell.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u8(volatile char *m, long old, long new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	insbl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extbl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskbl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u16(volatile short *m, long old, long new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	inswl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extwl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskwl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+		case 1:
+			return __cmpxchg_u8(ptr, old, new);
+		case 2:
+			return __cmpxchg_u16(ptr, old, new);
+		case 4:
+			return __cmpxchg_u32(ptr, old, new);
+		case 8:
+			return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+#define cmpxchg64(ptr, o, n)						 \
+  ({									 \
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				 \
+	cmpxchg((ptr), (o), (n));					 \
+  })
+
+static inline unsigned long
+__cmpxchg_u8_local(volatile char *m, long old, long new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	insbl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extbl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskbl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u16_local(volatile short *m, long old, long new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	inswl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extwl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskwl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u32_local(volatile int *m, int old, int new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u64_local(volatile long *m, unsigned long old, unsigned long new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
+		int size)
+{
+	switch (size) {
+		case 1:
+			return __cmpxchg_u8_local(ptr, old, new);
+		case 2:
+			return __cmpxchg_u16_local(ptr, old, new);
+		case 4:
+			return __cmpxchg_u32_local(ptr, old, new);
+		case 8:
+			return __cmpxchg_u64_local(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg_local(ptr, o, n)					 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+#define cmpxchg64_local(ptr, o, n)					 \
+  ({									 \
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				 \
+	cmpxchg_local((ptr), (o), (n));					 \
+  })
+
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif
diff --git a/arch/alpha/include/asm/termbits.h b/arch/alpha/include/asm/termbits.h
new file mode 100644
index 00000000000..ad854a4a3af
--- /dev/null
+++ b/arch/alpha/include/asm/termbits.h
@@ -0,0 +1,200 @@
+#ifndef _ALPHA_TERMBITS_H
+#define _ALPHA_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+/*
+ * termios type and macro definitions.  Be careful about adding stuff
+ * to this file since it's used in GNU libc and there are strict rules
+ * concerning namespace pollution.
+ */
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* Alpha has matching termios and ktermios */
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VEOF 0
+#define VEOL 1
+#define VEOL2 2
+#define VERASE 3
+#define VWERASE 4
+#define VKILL 5
+#define VREPRINT 6
+#define VSWTC 7
+#define VINTR 8
+#define VQUIT 9
+#define VSUSP 10
+#define VSTART 12
+#define VSTOP 13
+#define VLNEXT 14
+#define VDISCARD 15
+#define VMIN 16
+#define VTIME 17
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IXON	0001000
+#define IXOFF	0002000
+#define IXANY	0004000
+#define IUCLC	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define ONLCR	0000002
+#define OLCUC	0000004
+
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+
+#define OFILL	00000100
+#define OFDEL	00000200
+#define NLDLY	00001400
+#define   NL0	00000000
+#define   NL1	00000400
+#define   NL2	00001000
+#define   NL3	00001400
+#define TABDLY	00006000
+#define   TAB0	00000000
+#define   TAB1	00002000
+#define   TAB2	00004000
+#define   TAB3	00006000
+#define CRDLY	00030000
+#define   CR0	00000000
+#define   CR1	00010000
+#define   CR2	00020000
+#define   CR3	00030000
+#define FFDLY	00040000
+#define   FF0	00000000
+#define   FF1	00040000
+#define BSDLY	00100000
+#define   BS0	00000000
+#define   BS1	00100000
+#define VTDLY	00200000
+#define   VT0	00000000
+#define   VT1	00200000
+#define XTABS	01000000 /* Hmm.. Linux/i386 considers this part of TABDLY.. */
+
+/* c_cflag bit meaning */
+#define CBAUD	0000037
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CBAUDEX 0000000
+#define  B57600   00020
+#define  B115200  00021
+#define  B230400  00022
+#define  B460800  00023
+#define  B500000  00024
+#define  B576000  00025
+#define  B921600  00026
+#define B1000000  00027
+#define B1152000  00030
+#define B1500000  00031
+#define B2000000  00032
+#define B2500000  00033
+#define B3000000  00034
+#define B3500000  00035
+#define B4000000  00036
+
+#define CSIZE	00001400
+#define   CS5	00000000
+#define   CS6	00000400
+#define   CS7	00001000
+#define   CS8	00001400
+
+#define CSTOPB	00002000
+#define CREAD	00004000
+#define PARENB	00010000
+#define PARODD	00020000
+#define HUPCL	00040000
+
+#define CLOCAL	00100000
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000080
+#define ICANON	0x00000100
+#define XCASE	0x00004000
+#define ECHO	0x00000008
+#define ECHOE	0x00000002
+#define ECHOK	0x00000004
+#define ECHONL	0x00000010
+#define NOFLSH	0x80000000
+#define TOSTOP	0x00400000
+#define ECHOCTL	0x00000040
+#define ECHOPRT	0x00000020
+#define ECHOKE	0x00000001
+#define FLUSHO	0x00800000
+#define PENDIN	0x20000000
+#define IEXTEN	0x00000400
+
+/* Values for the ACTION argument to `tcflow'.  */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ALPHA_TERMBITS_H */
diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h
new file mode 100644
index 00000000000..fa13716a11c
--- /dev/null
+++ b/arch/alpha/include/asm/termios.h
@@ -0,0 +1,146 @@
+#ifndef _ALPHA_TERMIOS_H
+#define _ALPHA_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/*
+ * c_cc characters in the termio structure.  Oh, how I love being
+ * backwardly compatible.  Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VINTR	0
+#define _VQUIT	1
+#define _VERASE	2
+#define _VKILL	3
+#define _VEOF	4
+#define _VMIN	4
+#define _VEOL	5
+#define _VTIME	5
+#define _VEOL2	6
+#define _VSWTC	7
+
+#ifdef __KERNEL__
+/*	eof=^D		eol=\0		eol2=\0		erase=del
+	werase=^W	kill=^U		reprint=^R	sxtc=\0
+	intr=^C		quit=^\		susp=^Z		<OSF/1 VDSUSP>
+	start=^Q	stop=^S		lnext=^V	discard=^U
+	vmin=\1		vtime=\0
+*/
+#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+
+#define user_termio_to_kernel_termios(a_termios, u_termio)			\
+({										\
+	struct ktermios *k_termios = (a_termios);				\
+	struct termio k_termio;							\
+	int canon, ret;								\
+										\
+	ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio));		\
+	if (!ret) {								\
+		/* Overwrite only the low bits.  */				\
+		*(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag;	\
+		*(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag;	\
+		*(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag;	\
+		*(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag;	\
+		canon = k_termio.c_lflag & ICANON;				\
+										\
+		k_termios->c_cc[VINTR]  = k_termio.c_cc[_VINTR];		\
+		k_termios->c_cc[VQUIT]  = k_termio.c_cc[_VQUIT];		\
+		k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE];		\
+		k_termios->c_cc[VKILL]  = k_termio.c_cc[_VKILL];		\
+		k_termios->c_cc[VEOL2]  = k_termio.c_cc[_VEOL2];		\
+		k_termios->c_cc[VSWTC]  = k_termio.c_cc[_VSWTC];		\
+		k_termios->c_cc[canon ? VEOF : VMIN]  = k_termio.c_cc[_VEOF];	\
+		k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL];	\
+	}									\
+	ret;									\
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(u_termio, a_termios)		\
+({									\
+	struct ktermios *k_termios = (a_termios);			\
+	struct termio k_termio;						\
+	int canon;							\
+									\
+	k_termio.c_iflag = k_termios->c_iflag;				\
+	k_termio.c_oflag = k_termios->c_oflag;				\
+	k_termio.c_cflag = k_termios->c_cflag;				\
+	canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON;	\
+									\
+	k_termio.c_line = k_termios->c_line;				\
+	k_termio.c_cc[_VINTR]  = k_termios->c_cc[VINTR];		\
+	k_termio.c_cc[_VQUIT]  = k_termios->c_cc[VQUIT];		\
+	k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE];		\
+	k_termio.c_cc[_VKILL]  = k_termios->c_cc[VKILL];		\
+	k_termio.c_cc[_VEOF]   = k_termios->c_cc[canon ? VEOF : VMIN];	\
+	k_termio.c_cc[_VEOL]   = k_termios->c_cc[canon ? VEOL : VTIME];	\
+	k_termio.c_cc[_VEOL2]  = k_termios->c_cc[VEOL2];		\
+	k_termio.c_cc[_VSWTC]  = k_termios->c_cc[VSWTC];		\
+									\
+	copy_to_user(u_termio, &k_termio, sizeof(k_termio));		\
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+	copy_from_user(k, u, sizeof(struct termios))
+
+#define kernel_termios_to_user_termios(u, k) \
+	copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _ALPHA_TERMIOS_H */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
new file mode 100644
index 00000000000..15fda434442
--- /dev/null
+++ b/arch/alpha/include/asm/thread_info.h
@@ -0,0 +1,114 @@
+#ifndef _ALPHA_THREAD_INFO_H
+#define _ALPHA_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/types.h>
+#include <asm/hwrpb.h>
+#endif
+
+#ifndef __ASSEMBLY__
+struct thread_info {
+	struct pcb_struct	pcb;		/* palcode state */
+
+	struct task_struct	*task;		/* main task structure */
+	unsigned int		flags;		/* low level flags */
+	unsigned int		ieee_state;	/* see fpu.h */
+
+	struct exec_domain	*exec_domain;	/* execution domain */
+	mm_segment_t		addr_limit;	/* thread address space */
+	unsigned		cpu;		/* current CPU */
+	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+
+	int bpt_nsaved;
+	unsigned long bpt_addr[2];		/* breakpoint handling  */
+	unsigned int bpt_insn[2];
+
+	struct restart_block	restart_block;
+};
+
+/*
+ * Macros/functions for gaining access to the thread information structure.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* How to get the thread information struct from C.  */
+register struct thread_info *__current_thread_info __asm__("$8");
+#define current_thread_info()  __current_thread_info
+
+/* Thread information allocation.  */
+#define THREAD_SIZE_ORDER 1
+#define THREAD_SIZE (2*PAGE_SIZE)
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x40000000
+
+/*
+ * Thread information flags:
+ * - these are process state flags and used from assembly
+ * - pending work-to-be-done flags come first to fit in and immediate operand.
+ *
+ * TIF_SYSCALL_TRACE is known to be 0 via blbs.
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* poll_idle is polling NEED_RESCHED */
+#define TIF_DIE_IF_KERNEL	4	/* dik recursion lock */
+#define TIF_UAC_NOPRINT		5	/* see sysinfo.h */
+#define TIF_UAC_NOFIX		6
+#define TIF_UAC_SIGBUS		7
+#define TIF_MEMDIE		8
+#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+
+/* Work to do on interrupt/exception return.  */
+#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
+
+/* Work to do on any return to userspace.  */
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
+				 | _TIF_SYSCALL_TRACE)
+
+#define ALPHA_UAC_SHIFT		6
+#define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
+				 1 << TIF_UAC_SIGBUS)
+
+#define SET_UNALIGN_CTL(task,value)	({				     \
+	task_thread_info(task)->flags = ((task_thread_info(task)->flags &    \
+		~ALPHA_UAC_MASK)					     \
+		| (((value) << ALPHA_UAC_SHIFT)       & (1<<TIF_UAC_NOPRINT))\
+		| (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
+		| (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
+	0; })
+
+#define GET_UNALIGN_CTL(task,value)	({				\
+	put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\
+		  >> ALPHA_UAC_SHIFT					\
+		 | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\
+		 >> (ALPHA_UAC_SHIFT + 1)				\
+		 | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\
+		 >> (ALPHA_UAC_SHIFT - 1),				\
+		 (int __user *)(value));				\
+	})
+
+#endif /* __KERNEL__ */
+#endif /* _ALPHA_THREAD_INFO_H */
diff --git a/arch/alpha/include/asm/timex.h b/arch/alpha/include/asm/timex.h
new file mode 100644
index 00000000000..afa0c45e3e9
--- /dev/null
+++ b/arch/alpha/include/asm/timex.h
@@ -0,0 +1,31 @@
+/*
+ * linux/include/asm-alpha/timex.h
+ *
+ * ALPHA architecture timex specifications
+ */
+#ifndef _ASMALPHA_TIMEX_H
+#define _ASMALPHA_TIMEX_H
+
+/* With only one or two oddballs, we use the RTC as the ticker, selecting
+   the 32.768kHz reference clock, which nicely divides down to our HZ.  */
+#define CLOCK_TICK_RATE	32768
+
+/*
+ * Standard way to access the cycle counter.
+ * Currently only used on SMP for scheduling.
+ *
+ * Only the low 32 bits are available as a continuously counting entity. 
+ * But this only means we'll force a reschedule every 8 seconds or so,
+ * which isn't an evil thing.
+ */
+
+typedef unsigned int cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	cycles_t ret;
+	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
+	return ret;
+}
+
+#endif
diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h
new file mode 100644
index 00000000000..c13636575fb
--- /dev/null
+++ b/arch/alpha/include/asm/tlb.h
@@ -0,0 +1,15 @@
+#ifndef _ALPHA_TLB_H
+#define _ALPHA_TLB_H
+
+#define tlb_start_vma(tlb, vma)			do { } while (0)
+#define tlb_end_vma(tlb, vma)			do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, addr)	do { } while (0)
+
+#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+ 
+#endif
diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
new file mode 100644
index 00000000000..9d87aaa08c0
--- /dev/null
+++ b/arch/alpha/include/asm/tlbflush.h
@@ -0,0 +1,151 @@
+#ifndef _ALPHA_TLBFLUSH_H
+#define _ALPHA_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/compiler.h>
+#include <asm/pgalloc.h>
+
+#ifndef __EXTERN_INLINE
+#define __EXTERN_INLINE extern inline
+#define __MMU_EXTERN_INLINE
+#endif
+
+extern void __load_new_mm_context(struct mm_struct *);
+
+
+/* Use a few helper functions to hide the ugly broken ASN
+   numbers on early Alphas (ev4 and ev45).  */
+
+__EXTERN_INLINE void
+ev4_flush_tlb_current(struct mm_struct *mm)
+{
+	__load_new_mm_context(mm);
+	tbiap();
+}
+
+__EXTERN_INLINE void
+ev5_flush_tlb_current(struct mm_struct *mm)
+{
+	__load_new_mm_context(mm);
+}
+
+/* Flush just one page in the current TLB set.  We need to be very
+   careful about the icache here, there is no way to invalidate a
+   specific icache page.  */
+
+__EXTERN_INLINE void
+ev4_flush_tlb_current_page(struct mm_struct * mm,
+			   struct vm_area_struct *vma,
+			   unsigned long addr)
+{
+	int tbi_flag = 2;
+	if (vma->vm_flags & VM_EXEC) {
+		__load_new_mm_context(mm);
+		tbi_flag = 3;
+	}
+	tbi(tbi_flag, addr);
+}
+
+__EXTERN_INLINE void
+ev5_flush_tlb_current_page(struct mm_struct * mm,
+			   struct vm_area_struct *vma,
+			   unsigned long addr)
+{
+	if (vma->vm_flags & VM_EXEC)
+		__load_new_mm_context(mm);
+	else
+		tbi(2, addr);
+}
+
+
+#ifdef CONFIG_ALPHA_GENERIC
+# define flush_tlb_current		alpha_mv.mv_flush_tlb_current
+# define flush_tlb_current_page		alpha_mv.mv_flush_tlb_current_page
+#else
+# ifdef CONFIG_ALPHA_EV4
+#  define flush_tlb_current		ev4_flush_tlb_current
+#  define flush_tlb_current_page	ev4_flush_tlb_current_page
+# else
+#  define flush_tlb_current		ev5_flush_tlb_current
+#  define flush_tlb_current_page	ev5_flush_tlb_current_page
+# endif
+#endif
+
+#ifdef __MMU_EXTERN_INLINE
+#undef __EXTERN_INLINE
+#undef __MMU_EXTERN_INLINE
+#endif
+
+/* Flush current user mapping.  */
+static inline void
+flush_tlb(void)
+{
+	flush_tlb_current(current->active_mm);
+}
+
+/* Flush someone else's user mapping.  */
+static inline void
+flush_tlb_other(struct mm_struct *mm)
+{
+	unsigned long *mmc = &mm->context[smp_processor_id()];
+	/* Check it's not zero first to avoid cacheline ping pong
+	   when possible.  */
+	if (*mmc) *mmc = 0;
+}
+
+#ifndef CONFIG_SMP
+/* Flush everything (kernel mapping may also have changed
+   due to vmalloc/vfree).  */
+static inline void flush_tlb_all(void)
+{
+	tbia();
+}
+
+/* Flush a specified user mapping.  */
+static inline void
+flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		flush_tlb_current(mm);
+	else
+		flush_tlb_other(mm);
+}
+
+/* Page-granular tlb flush.  */
+static inline void
+flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	struct mm_struct *mm = vma->vm_mm;
+
+	if (mm == current->active_mm)
+		flush_tlb_current_page(mm, vma, addr);
+	else
+		flush_tlb_other(mm);
+}
+
+/* Flush a specified range of user mapping.  On the Alpha we flush
+   the whole user tlb.  */
+static inline void
+flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+		unsigned long end)
+{
+	flush_tlb_mm(vma->vm_mm);
+}
+
+#else /* CONFIG_SMP */
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void flush_tlb_range(struct vm_area_struct *, unsigned long,
+			    unsigned long);
+
+#endif /* CONFIG_SMP */
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					unsigned long end)
+{
+	flush_tlb_all();
+}
+
+#endif /* _ALPHA_TLBFLUSH_H */
diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h
new file mode 100644
index 00000000000..149532e162c
--- /dev/null
+++ b/arch/alpha/include/asm/topology.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_ALPHA_TOPOLOGY_H
+#define _ASM_ALPHA_TOPOLOGY_H
+
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <asm/machvec.h>
+
+#ifdef CONFIG_NUMA
+static inline int cpu_to_node(int cpu)
+{
+	int node;
+	
+	if (!alpha_mv.cpuid_to_nid)
+		return 0;
+
+	node = alpha_mv.cpuid_to_nid(cpu);
+
+#ifdef DEBUG_NUMA
+	BUG_ON(node < 0);
+#endif
+
+	return node;
+}
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	cpumask_t node_cpu_mask = CPU_MASK_NONE;
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		if (cpu_to_node(cpu) == node)
+			cpu_set(cpu, node_cpu_mask);
+	}
+
+#ifdef DEBUG_NUMA
+	printk("node %d: cpu_mask: %016lx\n", node, node_cpu_mask);
+#endif
+
+	return node_cpu_mask;
+}
+
+#define pcibus_to_cpumask(bus)	(cpu_online_map)
+
+#endif /* !CONFIG_NUMA */
+# include <asm-generic/topology.h>
+
+#endif /* _ASM_ALPHA_TOPOLOGY_H */
diff --git a/arch/alpha/include/asm/types.h b/arch/alpha/include/asm/types.h
new file mode 100644
index 00000000000..c1541353cce
--- /dev/null
+++ b/arch/alpha/include/asm/types.h
@@ -0,0 +1,33 @@
+#ifndef _ALPHA_TYPES_H
+#define _ALPHA_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+#include <asm-generic/int-l64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned int umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+typedef u64 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ALPHA_TYPES_H */
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
new file mode 100644
index 00000000000..22de3b434a2
--- /dev/null
+++ b/arch/alpha/include/asm/uaccess.h
@@ -0,0 +1,511 @@
+#ifndef __ALPHA_UACCESS_H
+#define __ALPHA_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * Or at least it did once upon a time.  Nowadays it is a mask that
+ * defines which bits of the address space are off limits.  This is a
+ * wee bit faster than the above.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define KERNEL_DS	((mm_segment_t) { 0UL })
+#define USER_DS		((mm_segment_t) { -0x40000000000UL })
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_fs()  (current_thread_info()->addr_limit)
+#define get_ds()  (KERNEL_DS)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+/*
+ * Is a address valid? This does a straightforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - AND "addr+size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
+ */
+#define __access_ok(addr,size,segment) \
+	(((segment).seg & (addr | size | (addr+size))) == 0)
+
+#define access_ok(type,addr,size)				\
+({								\
+	__chk_user_ptr(addr);					\
+	__access_ok(((unsigned long)(addr)),(size),get_fs());	\
+})
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * As the alpha uses the same address space for kernel and user
+ * data, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr) \
+  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)),get_fs())
+#define get_user(x,ptr) \
+  __get_user_check((x),(ptr),sizeof(*(ptr)),get_fs())
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+  
+/*
+ * The "lda %1, 2b-1b(%0)" bits are magic to get the assembler to
+ * encode the bits we need for resolving the exception.  See the
+ * more extensive comments with fixup_inline_exception below for
+ * more information.
+ */
+
+extern void __get_user_unknown(void);
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err = 0;					\
+	unsigned long __gu_val;					\
+	__chk_user_ptr(ptr);					\
+	switch (size) {						\
+	  case 1: __get_user_8(ptr); break;			\
+	  case 2: __get_user_16(ptr); break;			\
+	  case 4: __get_user_32(ptr); break;			\
+	  case 8: __get_user_64(ptr); break;			\
+	  default: __get_user_unknown(); break;			\
+	}							\
+	(x) = (__typeof__(*(ptr))) __gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size,segment)				\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long __gu_val = 0;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	if (__access_ok((unsigned long)__gu_addr,size,segment)) {	\
+		__gu_err = 0;						\
+		switch (size) {						\
+		  case 1: __get_user_8(__gu_addr); break;		\
+		  case 2: __get_user_16(__gu_addr); break;		\
+		  case 4: __get_user_32(__gu_addr); break;		\
+		  case 8: __get_user_64(__gu_addr); break;		\
+		  default: __get_user_unknown(); break;			\
+		}							\
+	}								\
+	(x) = (__typeof__(*(ptr))) __gu_val;				\
+	__gu_err;							\
+})
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+#define __get_user_64(addr)				\
+	__asm__("1: ldq %0,%2\n"			\
+	"2:\n"						\
+	".section __ex_table,\"a\"\n"			\
+	"	.long 1b - .\n"				\
+	"	lda %0, 2b-1b(%1)\n"			\
+	".previous"					\
+		: "=r"(__gu_val), "=r"(__gu_err)	\
+		: "m"(__m(addr)), "1"(__gu_err))
+
+#define __get_user_32(addr)				\
+	__asm__("1: ldl %0,%2\n"			\
+	"2:\n"						\
+	".section __ex_table,\"a\"\n"			\
+	"	.long 1b - .\n"				\
+	"	lda %0, 2b-1b(%1)\n"			\
+	".previous"					\
+		: "=r"(__gu_val), "=r"(__gu_err)	\
+		: "m"(__m(addr)), "1"(__gu_err))
+
+#ifdef __alpha_bwx__
+/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
+
+#define __get_user_16(addr)				\
+	__asm__("1: ldwu %0,%2\n"			\
+	"2:\n"						\
+	".section __ex_table,\"a\"\n"			\
+	"	.long 1b - .\n"				\
+	"	lda %0, 2b-1b(%1)\n"			\
+	".previous"					\
+		: "=r"(__gu_val), "=r"(__gu_err)	\
+		: "m"(__m(addr)), "1"(__gu_err))
+
+#define __get_user_8(addr)				\
+	__asm__("1: ldbu %0,%2\n"			\
+	"2:\n"						\
+	".section __ex_table,\"a\"\n"			\
+	"	.long 1b - .\n"				\
+	"	lda %0, 2b-1b(%1)\n"			\
+	".previous"					\
+		: "=r"(__gu_val), "=r"(__gu_err)	\
+		: "m"(__m(addr)), "1"(__gu_err))
+#else
+/* Unfortunately, we can't get an unaligned access trap for the sub-word
+   load, so we have to do a general unaligned operation.  */
+
+#define __get_user_16(addr)						\
+{									\
+	long __gu_tmp;							\
+	__asm__("1: ldq_u %0,0(%3)\n"					\
+	"2:	ldq_u %1,1(%3)\n"					\
+	"	extwl %0,%3,%0\n"					\
+	"	extwh %1,%3,%1\n"					\
+	"	or %0,%1,%0\n"						\
+	"3:\n"								\
+	".section __ex_table,\"a\"\n"					\
+	"	.long 1b - .\n"						\
+	"	lda %0, 3b-1b(%2)\n"					\
+	"	.long 2b - .\n"						\
+	"	lda %0, 3b-2b(%2)\n"					\
+	".previous"							\
+		: "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err)	\
+		: "r"(addr), "2"(__gu_err));				\
+}
+
+#define __get_user_8(addr)						\
+	__asm__("1: ldq_u %0,0(%2)\n"					\
+	"	extbl %0,%2,%0\n"					\
+	"2:\n"								\
+	".section __ex_table,\"a\"\n"					\
+	"	.long 1b - .\n"						\
+	"	lda %0, 2b-1b(%1)\n"					\
+	".previous"							\
+		: "=&r"(__gu_val), "=r"(__gu_err)			\
+		: "r"(addr), "1"(__gu_err))
+#endif
+
+extern void __put_user_unknown(void);
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err = 0;					\
+	__chk_user_ptr(ptr);					\
+	switch (size) {						\
+	  case 1: __put_user_8(x,ptr); break;			\
+	  case 2: __put_user_16(x,ptr); break;			\
+	  case 4: __put_user_32(x,ptr); break;			\
+	  case 8: __put_user_64(x,ptr); break;			\
+	  default: __put_user_unknown(); break;			\
+	}							\
+	__pu_err;						\
+})
+
+#define __put_user_check(x,ptr,size,segment)				\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	if (__access_ok((unsigned long)__pu_addr,size,segment)) {	\
+		__pu_err = 0;						\
+		switch (size) {						\
+		  case 1: __put_user_8(x,__pu_addr); break;		\
+		  case 2: __put_user_16(x,__pu_addr); break;		\
+		  case 4: __put_user_32(x,__pu_addr); break;		\
+		  case 8: __put_user_64(x,__pu_addr); break;		\
+		  default: __put_user_unknown(); break;			\
+		}							\
+	}								\
+	__pu_err;							\
+})
+
+/*
+ * The "__put_user_xx()" macros tell gcc they read from memory
+ * instead of writing: this is because they do not write to
+ * any memory gcc knows about, so there are no aliasing issues
+ */
+#define __put_user_64(x,addr)					\
+__asm__ __volatile__("1: stq %r2,%1\n"				\
+	"2:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31,2b-1b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err)				\
+		: "m" (__m(addr)), "rJ" (x), "0"(__pu_err))
+
+#define __put_user_32(x,addr)					\
+__asm__ __volatile__("1: stl %r2,%1\n"				\
+	"2:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31,2b-1b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err)				\
+		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
+
+#ifdef __alpha_bwx__
+/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
+
+#define __put_user_16(x,addr)					\
+__asm__ __volatile__("1: stw %r2,%1\n"				\
+	"2:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31,2b-1b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err)				\
+		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
+
+#define __put_user_8(x,addr)					\
+__asm__ __volatile__("1: stb %r2,%1\n"				\
+	"2:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31,2b-1b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err)				\
+		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
+#else
+/* Unfortunately, we can't get an unaligned access trap for the sub-word
+   write, so we have to do a general unaligned operation.  */
+
+#define __put_user_16(x,addr)					\
+{								\
+	long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4;	\
+	__asm__ __volatile__(					\
+	"1:	ldq_u %2,1(%5)\n"				\
+	"2:	ldq_u %1,0(%5)\n"				\
+	"	inswh %6,%5,%4\n"				\
+	"	inswl %6,%5,%3\n"				\
+	"	mskwh %2,%5,%2\n"				\
+	"	mskwl %1,%5,%1\n"				\
+	"	or %2,%4,%2\n"					\
+	"	or %1,%3,%1\n"					\
+	"3:	stq_u %2,1(%5)\n"				\
+	"4:	stq_u %1,0(%5)\n"				\
+	"5:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31, 5b-1b(%0)\n"				\
+	"	.long 2b - .\n"					\
+	"	lda $31, 5b-2b(%0)\n"				\
+	"	.long 3b - .\n"					\
+	"	lda $31, 5b-3b(%0)\n"				\
+	"	.long 4b - .\n"					\
+	"	lda $31, 5b-4b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err), "=&r"(__pu_tmp1),		\
+		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3),		\
+		  "=&r"(__pu_tmp4)				\
+		: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
+}
+
+#define __put_user_8(x,addr)					\
+{								\
+	long __pu_tmp1, __pu_tmp2;				\
+	__asm__ __volatile__(					\
+	"1:	ldq_u %1,0(%4)\n"				\
+	"	insbl %3,%4,%2\n"				\
+	"	mskbl %1,%4,%1\n"				\
+	"	or %1,%2,%1\n"					\
+	"2:	stq_u %1,0(%4)\n"				\
+	"3:\n"							\
+	".section __ex_table,\"a\"\n"				\
+	"	.long 1b - .\n"					\
+	"	lda $31, 3b-1b(%0)\n"				\
+	"	.long 2b - .\n"					\
+	"	lda $31, 3b-2b(%0)\n"				\
+	".previous"						\
+		: "=r"(__pu_err),				\
+	  	  "=&r"(__pu_tmp1), "=&r"(__pu_tmp2)		\
+		: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
+}
+#endif
+
+
+/*
+ * Complex access routines
+ */
+
+/* This little bit of silliness is to get the GP loaded for a function
+   that ordinarily wouldn't.  Otherwise we could have it done by the macro
+   directly, which can be optimized the linker.  */
+#ifdef MODULE
+#define __module_address(sym)		"r"(sym),
+#define __module_call(ra, arg, sym)	"jsr $" #ra ",(%" #arg ")," #sym
+#else
+#define __module_address(sym)
+#define __module_call(ra, arg, sym)	"bsr $" #ra "," #sym " !samegp"
+#endif
+
+extern void __copy_user(void);
+
+extern inline long
+__copy_tofrom_user_nocheck(void *to, const void *from, long len)
+{
+	register void * __cu_to __asm__("$6") = to;
+	register const void * __cu_from __asm__("$7") = from;
+	register long __cu_len __asm__("$0") = len;
+
+	__asm__ __volatile__(
+		__module_call(28, 3, __copy_user)
+		: "=r" (__cu_len), "=r" (__cu_from), "=r" (__cu_to)
+		: __module_address(__copy_user)
+		  "0" (__cu_len), "1" (__cu_from), "2" (__cu_to)
+		: "$1","$2","$3","$4","$5","$28","memory");
+
+	return __cu_len;
+}
+
+extern inline long
+__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
+{
+	if (__access_ok((unsigned long)validate, len, get_fs()))
+		len = __copy_tofrom_user_nocheck(to, from, len);
+	return len;
+}
+
+#define __copy_to_user(to,from,n)					\
+({									\
+	__chk_user_ptr(to);						\
+	__copy_tofrom_user_nocheck((__force void *)(to),(from),(n));	\
+})
+#define __copy_from_user(to,from,n)					\
+({									\
+	__chk_user_ptr(from);						\
+	__copy_tofrom_user_nocheck((to),(__force void *)(from),(n));	\
+})
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+
+extern inline long
+copy_to_user(void __user *to, const void *from, long n)
+{
+	return __copy_tofrom_user((__force void *)to, from, n, to);
+}
+
+extern inline long
+copy_from_user(void *to, const void __user *from, long n)
+{
+	return __copy_tofrom_user(to, (__force void *)from, n, from);
+}
+
+extern void __do_clear_user(void);
+
+extern inline long
+__clear_user(void __user *to, long len)
+{
+	register void __user * __cl_to __asm__("$6") = to;
+	register long __cl_len __asm__("$0") = len;
+	__asm__ __volatile__(
+		__module_call(28, 2, __do_clear_user)
+		: "=r"(__cl_len), "=r"(__cl_to)
+		: __module_address(__do_clear_user)
+		  "0"(__cl_len), "1"(__cl_to)
+		: "$1","$2","$3","$4","$5","$28","memory");
+	return __cl_len;
+}
+
+extern inline long
+clear_user(void __user *to, long len)
+{
+	if (__access_ok((unsigned long)to, len, get_fs()))
+		len = __clear_user(to, len);
+	return len;
+}
+
+#undef __module_address
+#undef __module_call
+
+/* Returns: -EFAULT if exception before terminator, N if the entire
+   buffer filled, else strlen.  */
+
+extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len);
+
+extern inline long
+strncpy_from_user(char *to, const char __user *from, long n)
+{
+	long ret = -EFAULT;
+	if (__access_ok((unsigned long)from, 0, get_fs()))
+		ret = __strncpy_from_user(to, from, n);
+	return ret;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+extern long __strlen_user(const char __user *);
+
+extern inline long strlen_user(const char __user *str)
+{
+	return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0;
+}
+
+/* Returns: 0 if exception before NUL or reaching the supplied limit (N),
+ * a value greater than N if the limit would be exceeded, else strlen.  */
+extern long __strnlen_user(const char __user *, long);
+
+extern inline long strnlen_user(const char __user *str, long n)
+{
+	return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0;
+}
+
+/*
+ * About the exception table:
+ *
+ * - insn is a 32-bit pc-relative offset from the faulting insn.
+ * - nextinsn is a 16-bit offset off of the faulting instruction
+ *   (not off of the *next* instruction as branches are).
+ * - errreg is the register in which to place -EFAULT.
+ * - valreg is the final target register for the load sequence
+ *   and will be zeroed.
+ *
+ * Either errreg or valreg may be $31, in which case nothing happens.
+ *
+ * The exception fixup information "just so happens" to be arranged
+ * as in a MEM format instruction.  This lets us emit our three
+ * values like so:
+ *
+ *      lda valreg, nextinsn(errreg)
+ *
+ */
+
+struct exception_table_entry
+{
+	signed int insn;
+	union exception_fixup {
+		unsigned unit;
+		struct {
+			signed int nextinsn : 16;
+			unsigned int errreg : 5;
+			unsigned int valreg : 5;
+		} bits;
+	} fixup;
+};
+
+/* Returns the new pc */
+#define fixup_exception(map_reg, fixup, pc)			\
+({								\
+	if ((fixup)->fixup.bits.valreg != 31)			\
+		map_reg((fixup)->fixup.bits.valreg) = 0;	\
+	if ((fixup)->fixup.bits.errreg != 31)			\
+		map_reg((fixup)->fixup.bits.errreg) = -EFAULT;	\
+	(pc) + (fixup)->fixup.bits.nextinsn;			\
+})
+
+
+#endif /* __ALPHA_UACCESS_H */
diff --git a/arch/alpha/include/asm/ucontext.h b/arch/alpha/include/asm/ucontext.h
new file mode 100644
index 00000000000..47578ab4215
--- /dev/null
+++ b/arch/alpha/include/asm/ucontext.h
@@ -0,0 +1,13 @@
+#ifndef _ASMAXP_UCONTEXT_H
+#define _ASMAXP_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	old_sigset_t	  uc_osf_sigmask;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASMAXP_UCONTEXT_H */
diff --git a/arch/alpha/include/asm/unaligned.h b/arch/alpha/include/asm/unaligned.h
new file mode 100644
index 00000000000..3787c60aed3
--- /dev/null
+++ b/arch/alpha/include/asm/unaligned.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_ALPHA_UNALIGNED_H
+#define _ASM_ALPHA_UNALIGNED_H
+
+#include <linux/unaligned/le_struct.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+
+#endif /* _ASM_ALPHA_UNALIGNED_H */
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
new file mode 100644
index 00000000000..5b5c1748594
--- /dev/null
+++ b/arch/alpha/include/asm/unistd.h
@@ -0,0 +1,464 @@
+#ifndef _ALPHA_UNISTD_H
+#define _ALPHA_UNISTD_H
+
+#define __NR_osf_syscall	  0	/* not implemented */
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_osf_old_open	  5	/* not implemented */
+#define __NR_close		  6
+#define __NR_osf_wait4		  7
+#define __NR_osf_old_creat	  8	/* not implemented */
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_osf_execve		 11	/* not implemented */
+#define __NR_chdir		 12
+#define __NR_fchdir		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_brk		 17
+#define __NR_osf_getfsstat	 18	/* not implemented */
+#define __NR_lseek		 19
+#define __NR_getxpid		 20
+#define __NR_osf_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getxuid		 24
+#define __NR_exec_with_loader	 25	/* not implemented */
+#define __NR_ptrace		 26
+#define __NR_osf_nrecvmsg	 27	/* not implemented */
+#define __NR_osf_nsendmsg	 28	/* not implemented */
+#define __NR_osf_nrecvfrom	 29	/* not implemented */
+#define __NR_osf_naccept	 30	/* not implemented */
+#define __NR_osf_ngetpeername	 31	/* not implemented */
+#define __NR_osf_ngetsockname	 32	/* not implemented */
+#define __NR_access		 33
+#define __NR_osf_chflags	 34	/* not implemented */
+#define __NR_osf_fchflags	 35	/* not implemented */
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_osf_old_stat	 38	/* not implemented */
+#define __NR_setpgid		 39
+#define __NR_osf_old_lstat	 40	/* not implemented */
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_osf_set_program_attributes	43
+#define __NR_osf_profil		 44	/* not implemented */
+#define __NR_open		 45
+#define __NR_osf_old_sigaction	 46	/* not implemented */
+#define __NR_getxgid		 47
+#define __NR_osf_sigprocmask	 48
+#define __NR_osf_getlogin	 49	/* not implemented */
+#define __NR_osf_setlogin	 50	/* not implemented */
+#define __NR_acct		 51
+#define __NR_sigpending		 52
+
+#define __NR_ioctl		 54
+#define __NR_osf_reboot		 55	/* not implemented */
+#define __NR_osf_revoke		 56	/* not implemented */
+#define __NR_symlink		 57
+#define __NR_readlink		 58
+#define __NR_execve		 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_osf_old_fstat	 62	/* not implemented */
+#define __NR_getpgrp		 63
+#define __NR_getpagesize	 64
+#define __NR_osf_mremap		 65	/* not implemented */
+#define __NR_vfork		 66
+#define __NR_stat		 67
+#define __NR_lstat		 68
+#define __NR_osf_sbrk		 69	/* not implemented */
+#define __NR_osf_sstk		 70	/* not implemented */
+#define __NR_mmap		 71	/* OSF/1 mmap is superset of Linux */
+#define __NR_osf_old_vadvise	 72	/* not implemented */
+#define __NR_munmap		 73
+#define __NR_mprotect		 74
+#define __NR_madvise		 75
+#define __NR_vhangup		 76
+#define __NR_osf_kmodcall	 77	/* not implemented */
+#define __NR_osf_mincore	 78	/* not implemented */
+#define __NR_getgroups		 79
+#define __NR_setgroups		 80
+#define __NR_osf_old_getpgrp	 81	/* not implemented */
+#define __NR_setpgrp		 82	/* BSD alias for setpgid */
+#define __NR_osf_setitimer	 83
+#define __NR_osf_old_wait	 84	/* not implemented */
+#define __NR_osf_table		 85	/* not implemented */
+#define __NR_osf_getitimer	 86
+#define __NR_gethostname	 87
+#define __NR_sethostname	 88
+#define __NR_getdtablesize	 89
+#define __NR_dup2		 90
+#define __NR_fstat		 91
+#define __NR_fcntl		 92
+#define __NR_osf_select		 93
+#define __NR_poll		 94
+#define __NR_fsync		 95
+#define __NR_setpriority	 96
+#define __NR_socket		 97
+#define __NR_connect		 98
+#define __NR_accept		 99
+#define __NR_getpriority	100
+#define __NR_send		101
+#define __NR_recv		102
+#define __NR_sigreturn		103
+#define __NR_bind		104
+#define __NR_setsockopt		105
+#define __NR_listen		106
+#define __NR_osf_plock		107	/* not implemented */
+#define __NR_osf_old_sigvec	108	/* not implemented */
+#define __NR_osf_old_sigblock	109	/* not implemented */
+#define __NR_osf_old_sigsetmask	110	/* not implemented */
+#define __NR_sigsuspend		111
+#define __NR_osf_sigstack	112
+#define __NR_recvmsg		113
+#define __NR_sendmsg		114
+#define __NR_osf_old_vtrace	115	/* not implemented */
+#define __NR_osf_gettimeofday	116
+#define __NR_osf_getrusage	117
+#define __NR_getsockopt		118
+
+#define __NR_readv		120
+#define __NR_writev		121
+#define __NR_osf_settimeofday	122
+#define __NR_fchown		123
+#define __NR_fchmod		124
+#define __NR_recvfrom		125
+#define __NR_setreuid		126
+#define __NR_setregid		127
+#define __NR_rename		128
+#define __NR_truncate		129
+#define __NR_ftruncate		130
+#define __NR_flock		131
+#define __NR_setgid		132
+#define __NR_sendto		133
+#define __NR_shutdown		134
+#define __NR_socketpair		135
+#define __NR_mkdir		136
+#define __NR_rmdir		137
+#define __NR_osf_utimes		138
+#define __NR_osf_old_sigreturn	139	/* not implemented */
+#define __NR_osf_adjtime	140	/* not implemented */
+#define __NR_getpeername	141
+#define __NR_osf_gethostid	142	/* not implemented */
+#define __NR_osf_sethostid	143	/* not implemented */
+#define __NR_getrlimit		144
+#define __NR_setrlimit		145
+#define __NR_osf_old_killpg	146	/* not implemented */
+#define __NR_setsid		147
+#define __NR_quotactl		148
+#define __NR_osf_oldquota	149	/* not implemented */
+#define __NR_getsockname	150
+
+#define __NR_osf_pid_block	153	/* not implemented */
+#define __NR_osf_pid_unblock	154	/* not implemented */
+
+#define __NR_sigaction		156
+#define __NR_osf_sigwaitprim	157	/* not implemented */
+#define __NR_osf_nfssvc		158	/* not implemented */
+#define __NR_osf_getdirentries	159
+#define __NR_osf_statfs		160
+#define __NR_osf_fstatfs	161
+
+#define __NR_osf_asynch_daemon	163	/* not implemented */
+#define __NR_osf_getfh		164	/* not implemented */	
+#define __NR_osf_getdomainname	165
+#define __NR_setdomainname	166
+
+#define __NR_osf_exportfs	169	/* not implemented */
+
+#define __NR_osf_alt_plock	181	/* not implemented */
+
+#define __NR_osf_getmnt		184	/* not implemented */
+
+#define __NR_osf_alt_sigpending	187	/* not implemented */
+#define __NR_osf_alt_setsid	188	/* not implemented */
+
+#define __NR_osf_swapon		199
+#define __NR_msgctl		200
+#define __NR_msgget		201
+#define __NR_msgrcv		202
+#define __NR_msgsnd		203
+#define __NR_semctl		204
+#define __NR_semget		205
+#define __NR_semop		206
+#define __NR_osf_utsname	207
+#define __NR_lchown		208
+#define __NR_osf_shmat		209
+#define __NR_shmctl		210
+#define __NR_shmdt		211
+#define __NR_shmget		212
+#define __NR_osf_mvalid		213	/* not implemented */
+#define __NR_osf_getaddressconf	214	/* not implemented */
+#define __NR_osf_msleep		215	/* not implemented */
+#define __NR_osf_mwakeup	216	/* not implemented */
+#define __NR_msync		217
+#define __NR_osf_signal		218	/* not implemented */
+#define __NR_osf_utc_gettime	219	/* not implemented */
+#define __NR_osf_utc_adjtime	220	/* not implemented */
+
+#define __NR_osf_security	222	/* not implemented */
+#define __NR_osf_kloadcall	223	/* not implemented */
+
+#define __NR_getpgid		233
+#define __NR_getsid		234
+#define __NR_sigaltstack	235
+#define __NR_osf_waitid		236	/* not implemented */
+#define __NR_osf_priocntlset	237	/* not implemented */
+#define __NR_osf_sigsendset	238	/* not implemented */
+#define __NR_osf_set_speculative	239	/* not implemented */
+#define __NR_osf_msfs_syscall	240	/* not implemented */
+#define __NR_osf_sysinfo	241
+#define __NR_osf_uadmin		242	/* not implemented */
+#define __NR_osf_fuser		243	/* not implemented */
+#define __NR_osf_proplist_syscall    244
+#define __NR_osf_ntp_adjtime	245	/* not implemented */
+#define __NR_osf_ntp_gettime	246	/* not implemented */
+#define __NR_osf_pathconf	247	/* not implemented */
+#define __NR_osf_fpathconf	248	/* not implemented */
+
+#define __NR_osf_uswitch	250	/* not implemented */
+#define __NR_osf_usleep_thread	251
+#define __NR_osf_audcntl	252	/* not implemented */
+#define __NR_osf_audgen		253	/* not implemented */
+#define __NR_sysfs		254
+#define __NR_osf_subsys_info	255	/* not implemented */
+#define __NR_osf_getsysinfo	256
+#define __NR_osf_setsysinfo	257
+#define __NR_osf_afs_syscall	258	/* not implemented */
+#define __NR_osf_swapctl	259	/* not implemented */
+#define __NR_osf_memcntl	260	/* not implemented */
+#define __NR_osf_fdatasync	261	/* not implemented */
+
+/*
+ * Ignore legacy syscalls that we don't use.
+ */
+#define __IGNORE_alarm
+#define __IGNORE_creat
+#define __IGNORE_getegid
+#define __IGNORE_geteuid
+#define __IGNORE_getgid
+#define __IGNORE_getpid
+#define __IGNORE_getppid
+#define __IGNORE_getuid
+#define __IGNORE_pause
+#define __IGNORE_time
+#define __IGNORE_utime
+
+/*
+ * Linux-specific system calls begin at 300
+ */
+#define __NR_bdflush		300
+#define __NR_sethae		301
+#define __NR_mount		302
+#define __NR_old_adjtimex	303
+#define __NR_swapoff		304
+#define __NR_getdents		305
+#define __NR_create_module	306
+#define __NR_init_module	307
+#define __NR_delete_module	308
+#define __NR_get_kernel_syms	309
+#define __NR_syslog		310
+#define __NR_reboot		311
+#define __NR_clone		312
+#define __NR_uselib		313
+#define __NR_mlock		314
+#define __NR_munlock		315
+#define __NR_mlockall		316
+#define __NR_munlockall		317
+#define __NR_sysinfo		318
+#define __NR__sysctl		319
+/* 320 was sys_idle.  */
+#define __NR_oldumount		321
+#define __NR_swapon		322
+#define __NR_times		323
+#define __NR_personality	324
+#define __NR_setfsuid		325
+#define __NR_setfsgid		326
+#define __NR_ustat		327
+#define __NR_statfs		328
+#define __NR_fstatfs		329
+#define __NR_sched_setparam		330
+#define __NR_sched_getparam		331
+#define __NR_sched_setscheduler		332
+#define __NR_sched_getscheduler		333
+#define __NR_sched_yield		334
+#define __NR_sched_get_priority_max	335
+#define __NR_sched_get_priority_min	336
+#define __NR_sched_rr_get_interval	337
+#define __NR_afs_syscall		338
+#define __NR_uname			339
+#define __NR_nanosleep			340
+#define __NR_mremap			341
+#define __NR_nfsservctl			342
+#define __NR_setresuid			343
+#define __NR_getresuid			344
+#define __NR_pciconfig_read		345
+#define __NR_pciconfig_write		346
+#define __NR_query_module		347
+#define __NR_prctl			348
+#define __NR_pread64			349
+#define __NR_pwrite64			350
+#define __NR_rt_sigreturn		351
+#define __NR_rt_sigaction		352
+#define __NR_rt_sigprocmask		353
+#define __NR_rt_sigpending		354
+#define __NR_rt_sigtimedwait		355
+#define __NR_rt_sigqueueinfo		356
+#define __NR_rt_sigsuspend		357
+#define __NR_select			358
+#define __NR_gettimeofday		359
+#define __NR_settimeofday		360
+#define __NR_getitimer			361
+#define __NR_setitimer			362
+#define __NR_utimes			363
+#define __NR_getrusage			364
+#define __NR_wait4			365
+#define __NR_adjtimex			366
+#define __NR_getcwd			367
+#define __NR_capget			368
+#define __NR_capset			369
+#define __NR_sendfile			370
+#define __NR_setresgid			371
+#define __NR_getresgid			372
+#define __NR_dipc			373
+#define __NR_pivot_root			374
+#define __NR_mincore			375
+#define __NR_pciconfig_iobase		376
+#define __NR_getdents64			377
+#define __NR_gettid			378
+#define __NR_readahead			379
+/* 380 is unused */
+#define __NR_tkill			381
+#define __NR_setxattr			382
+#define __NR_lsetxattr			383
+#define __NR_fsetxattr			384
+#define __NR_getxattr			385
+#define __NR_lgetxattr			386
+#define __NR_fgetxattr			387
+#define __NR_listxattr			388
+#define __NR_llistxattr			389
+#define __NR_flistxattr			390
+#define __NR_removexattr		391
+#define __NR_lremovexattr		392
+#define __NR_fremovexattr		393
+#define __NR_futex			394
+#define __NR_sched_setaffinity		395     
+#define __NR_sched_getaffinity		396
+#define __NR_tuxcall			397
+#define __NR_io_setup			398
+#define __NR_io_destroy			399
+#define __NR_io_getevents		400
+#define __NR_io_submit			401
+#define __NR_io_cancel			402
+#define __NR_exit_group			405
+#define __NR_lookup_dcookie		406
+#define __NR_epoll_create		407
+#define __NR_epoll_ctl			408
+#define __NR_epoll_wait			409
+/* Feb 2007: These three sys_epoll defines shouldn't be here but culling
+ * them would break userspace apps ... we'll kill them off in 2010 :) */
+#define __NR_sys_epoll_create		__NR_epoll_create
+#define __NR_sys_epoll_ctl		__NR_epoll_ctl
+#define __NR_sys_epoll_wait		__NR_epoll_wait
+#define __NR_remap_file_pages		410
+#define __NR_set_tid_address		411
+#define __NR_restart_syscall		412
+#define __NR_fadvise64			413
+#define __NR_timer_create		414
+#define __NR_timer_settime		415
+#define __NR_timer_gettime		416
+#define __NR_timer_getoverrun		417
+#define __NR_timer_delete		418
+#define __NR_clock_settime		419
+#define __NR_clock_gettime		420
+#define __NR_clock_getres		421
+#define __NR_clock_nanosleep		422
+#define __NR_semtimedop			423
+#define __NR_tgkill			424
+#define __NR_stat64			425
+#define __NR_lstat64			426
+#define __NR_fstat64			427
+#define __NR_vserver			428
+#define __NR_mbind			429
+#define __NR_get_mempolicy		430
+#define __NR_set_mempolicy		431
+#define __NR_mq_open			432
+#define __NR_mq_unlink			433
+#define __NR_mq_timedsend		434
+#define __NR_mq_timedreceive		435
+#define __NR_mq_notify			436
+#define __NR_mq_getsetattr		437
+#define __NR_waitid			438
+#define __NR_add_key			439
+#define __NR_request_key		440
+#define __NR_keyctl			441
+#define __NR_ioprio_set			442
+#define __NR_ioprio_get			443
+#define __NR_inotify_init		444
+#define __NR_inotify_add_watch		445
+#define __NR_inotify_rm_watch		446
+#define __NR_fdatasync			447
+#define __NR_kexec_load			448
+#define __NR_migrate_pages		449
+#define __NR_openat			450
+#define __NR_mkdirat			451
+#define __NR_mknodat			452
+#define __NR_fchownat			453
+#define __NR_futimesat			454
+#define __NR_fstatat64			455
+#define __NR_unlinkat			456
+#define __NR_renameat			457
+#define __NR_linkat			458
+#define __NR_symlinkat			459
+#define __NR_readlinkat			460
+#define __NR_fchmodat			461
+#define __NR_faccessat			462
+#define __NR_pselect6			463
+#define __NR_ppoll			464
+#define __NR_unshare			465
+#define __NR_set_robust_list		466
+#define __NR_get_robust_list		467
+#define __NR_splice			468
+#define __NR_sync_file_range		469
+#define __NR_tee			470
+#define __NR_vmsplice			471
+#define __NR_move_pages			472
+#define __NR_getcpu			473
+#define __NR_epoll_pwait		474
+#define __NR_utimensat			475
+#define __NR_signalfd			476
+#define __NR_timerfd			477
+#define __NR_eventfd			478
+
+#ifdef __KERNEL__
+
+#define NR_SYSCALLS			479
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+
+/* "Conditional" syscalls.  What we want is
+
+	__attribute__((weak,alias("sys_ni_syscall")))
+
+   but that raises the problem of what type to give the symbol.  If we use
+   a prototype, it'll conflict with the definition given in this file and
+   others.  If we use __typeof, we discover that not all symbols actually
+   have declarations.  If we use no prototype, then we get warnings from
+   -Wstrict-prototypes.  Ho hum.  */
+
+#define cond_syscall(x)  asm(".weak\t" #x "\n" #x " = sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ALPHA_UNISTD_H */
diff --git a/arch/alpha/include/asm/user.h b/arch/alpha/include/asm/user.h
new file mode 100644
index 00000000000..a4eb6a4ca8d
--- /dev/null
+++ b/arch/alpha/include/asm/user.h
@@ -0,0 +1,53 @@
+#ifndef _ALPHA_USER_H
+#define _ALPHA_USER_H
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+
+#include <asm/page.h>
+#include <asm/reg.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	unsigned long	regs[EF_SIZE/8+32];	/* integer and fp regs */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ALPHA_USER_H */
diff --git a/arch/alpha/include/asm/vga.h b/arch/alpha/include/asm/vga.h
new file mode 100644
index 00000000000..c00106bac52
--- /dev/null
+++ b/arch/alpha/include/asm/vga.h
@@ -0,0 +1,82 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/io.h>
+
+#define VT_BUF_HAVE_RW
+#define VT_BUF_HAVE_MEMSETW
+#define VT_BUF_HAVE_MEMCPYW
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+	if (__is_ioaddr(addr))
+		__raw_writew(val, (volatile u16 __iomem *) addr);
+	else
+		*addr = val;
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+	if (__is_ioaddr(addr))
+		return __raw_readw((volatile const u16 __iomem *) addr);
+	else
+		return *addr;
+}
+
+static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
+{
+	if (__is_ioaddr(s))
+		memsetw_io((u16 __iomem *) s, c, count);
+	else
+		memsetw(s, c, count);
+}
+
+/* Do not trust that the usage will be correct; analyze the arguments.  */
+extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count);
+
+/* ??? These are currently only used for downloading character sets.  As
+   such, they don't need memory barriers.  Is this all they are intended
+   to be used for?  */
+#define vga_readb(a)	readb((u8 __iomem *)(a))
+#define vga_writeb(v,a)	writeb(v, (u8 __iomem *)(a))
+
+#ifdef CONFIG_VGA_HOSE
+#include <linux/ioport.h>
+#include <linux/pci.h>
+
+extern struct pci_controller *pci_vga_hose;
+
+# define __is_port_vga(a)       \
+	(((a) >= 0x3b0) && ((a) < 0x3e0) && \
+	 ((a) != 0x3b3) && ((a) != 0x3d3))
+
+# define __is_mem_vga(a) \
+	(((a) >= 0xa0000) && ((a) <= 0xc0000))
+
+# define FIXUP_IOADDR_VGA(a) do {                       \
+	if (pci_vga_hose && __is_port_vga(a))     \
+		(a) += pci_vga_hose->io_space->start;	  \
+ } while(0)
+
+# define FIXUP_MEMADDR_VGA(a) do {                       \
+	if (pci_vga_hose && __is_mem_vga(a))     \
+		(a) += pci_vga_hose->mem_space->start; \
+ } while(0)
+
+#else /* CONFIG_VGA_HOSE */
+# define pci_vga_hose 0
+# define __is_port_vga(a) 0
+# define __is_mem_vga(a) 0
+# define FIXUP_IOADDR_VGA(a)
+# define FIXUP_MEMADDR_VGA(a)
+#endif /* CONFIG_VGA_HOSE */
+
+#define VGA_MAP_MEM(x,s)	((unsigned long) ioremap(x, s))
+
+#endif
diff --git a/arch/alpha/include/asm/xor.h b/arch/alpha/include/asm/xor.h
new file mode 100644
index 00000000000..5ee1c2bc049
--- /dev/null
+++ b/arch/alpha/include/asm/xor.h
@@ -0,0 +1,855 @@
+/*
+ * include/asm-alpha/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for alpha EV5 and EV6
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+extern void xor_alpha_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_alpha_3(unsigned long, unsigned long *, unsigned long *,
+		        unsigned long *);
+extern void xor_alpha_4(unsigned long, unsigned long *, unsigned long *,
+		        unsigned long *, unsigned long *);
+extern void xor_alpha_5(unsigned long, unsigned long *, unsigned long *,
+		        unsigned long *, unsigned long *, unsigned long *);
+
+extern void xor_alpha_prefetch_2(unsigned long, unsigned long *,
+				 unsigned long *);
+extern void xor_alpha_prefetch_3(unsigned long, unsigned long *,
+				 unsigned long *, unsigned long *);
+extern void xor_alpha_prefetch_4(unsigned long, unsigned long *,
+				 unsigned long *, unsigned long *,
+				 unsigned long *);
+extern void xor_alpha_prefetch_5(unsigned long, unsigned long *,
+				 unsigned long *, unsigned long *,
+				 unsigned long *, unsigned long *);
+
+asm("								\n\
+	.text							\n\
+	.align 3						\n\
+	.ent xor_alpha_2					\n\
+xor_alpha_2:							\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+	.align 4						\n\
+2:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,8($17)						\n\
+	ldq $3,8($18)						\n\
+								\n\
+	ldq $4,16($17)						\n\
+	ldq $5,16($18)						\n\
+	ldq $6,24($17)						\n\
+	ldq $7,24($18)						\n\
+								\n\
+	ldq $19,32($17)						\n\
+	ldq $20,32($18)						\n\
+	ldq $21,40($17)						\n\
+	ldq $22,40($18)						\n\
+								\n\
+	ldq $23,48($17)						\n\
+	ldq $24,48($18)						\n\
+	ldq $25,56($17)						\n\
+	xor $0,$1,$0		# 7 cycles from $1 load		\n\
+								\n\
+	ldq $27,56($18)						\n\
+	xor $2,$3,$2						\n\
+	stq $0,0($17)						\n\
+	xor $4,$5,$4						\n\
+								\n\
+	stq $2,8($17)						\n\
+	xor $6,$7,$6						\n\
+	stq $4,16($17)						\n\
+	xor $19,$20,$19						\n\
+								\n\
+	stq $6,24($17)						\n\
+	xor $21,$22,$21						\n\
+	stq $19,32($17)						\n\
+	xor $23,$24,$23						\n\
+								\n\
+	stq $21,40($17)						\n\
+	xor $25,$27,$25						\n\
+	stq $23,48($17)						\n\
+	subq $16,1,$16						\n\
+								\n\
+	stq $25,56($17)						\n\
+	addq $17,64,$17						\n\
+	addq $18,64,$18						\n\
+	bgt $16,2b						\n\
+								\n\
+	ret							\n\
+	.end xor_alpha_2					\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_3					\n\
+xor_alpha_3:							\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+	.align 4						\n\
+3:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,8($17)						\n\
+								\n\
+	ldq $4,8($18)						\n\
+	ldq $6,16($17)						\n\
+	ldq $7,16($18)						\n\
+	ldq $21,24($17)						\n\
+								\n\
+	ldq $22,24($18)						\n\
+	ldq $24,32($17)						\n\
+	ldq $25,32($18)						\n\
+	ldq $5,8($19)						\n\
+								\n\
+	ldq $20,16($19)						\n\
+	ldq $23,24($19)						\n\
+	ldq $27,32($19)						\n\
+	nop							\n\
+								\n\
+	xor $0,$1,$1		# 8 cycles from $0 load		\n\
+	xor $3,$4,$4		# 6 cycles from $4 load		\n\
+	xor $6,$7,$7		# 6 cycles from $7 load		\n\
+	xor $21,$22,$22		# 5 cycles from $22 load	\n\
+								\n\
+	xor $1,$2,$2		# 9 cycles from $2 load		\n\
+	xor $24,$25,$25		# 5 cycles from $25 load	\n\
+	stq $2,0($17)						\n\
+	xor $4,$5,$5		# 6 cycles from $5 load		\n\
+								\n\
+	stq $5,8($17)						\n\
+	xor $7,$20,$20		# 7 cycles from $20 load	\n\
+	stq $20,16($17)						\n\
+	xor $22,$23,$23		# 7 cycles from $23 load	\n\
+								\n\
+	stq $23,24($17)						\n\
+	xor $25,$27,$27		# 7 cycles from $27 load	\n\
+	stq $27,32($17)						\n\
+	nop							\n\
+								\n\
+	ldq $0,40($17)						\n\
+	ldq $1,40($18)						\n\
+	ldq $3,48($17)						\n\
+	ldq $4,48($18)						\n\
+								\n\
+	ldq $6,56($17)						\n\
+	ldq $7,56($18)						\n\
+	ldq $2,40($19)						\n\
+	ldq $5,48($19)						\n\
+								\n\
+	ldq $20,56($19)						\n\
+	xor $0,$1,$1		# 4 cycles from $1 load		\n\
+	xor $3,$4,$4		# 5 cycles from $4 load		\n\
+	xor $6,$7,$7		# 5 cycles from $7 load		\n\
+								\n\
+	xor $1,$2,$2		# 4 cycles from $2 load		\n\
+	xor $4,$5,$5		# 5 cycles from $5 load		\n\
+	stq $2,40($17)						\n\
+	xor $7,$20,$20		# 4 cycles from $20 load	\n\
+								\n\
+	stq $5,48($17)						\n\
+	subq $16,1,$16						\n\
+	stq $20,56($17)						\n\
+	addq $19,64,$19						\n\
+								\n\
+	addq $18,64,$18						\n\
+	addq $17,64,$17						\n\
+	bgt $16,3b						\n\
+	ret							\n\
+	.end xor_alpha_3					\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_4					\n\
+xor_alpha_4:							\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+	.align 4						\n\
+4:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,0($20)						\n\
+								\n\
+	ldq $4,8($17)						\n\
+	ldq $5,8($18)						\n\
+	ldq $6,8($19)						\n\
+	ldq $7,8($20)						\n\
+								\n\
+	ldq $21,16($17)						\n\
+	ldq $22,16($18)						\n\
+	ldq $23,16($19)						\n\
+	ldq $24,16($20)						\n\
+								\n\
+	ldq $25,24($17)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	ldq $27,24($18)						\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	ldq $0,24($19)						\n\
+	xor $1,$3,$3						\n\
+	ldq $1,24($20)						\n\
+	xor $4,$5,$5		# 7 cycles from $5 load		\n\
+								\n\
+	stq $3,0($17)						\n\
+	xor $6,$7,$7						\n\
+	xor $21,$22,$22		# 7 cycles from $22 load	\n\
+	xor $5,$7,$7						\n\
+								\n\
+	stq $7,8($17)						\n\
+	xor $23,$24,$24		# 7 cycles from $24 load	\n\
+	ldq $2,32($17)						\n\
+	xor $22,$24,$24						\n\
+								\n\
+	ldq $3,32($18)						\n\
+	ldq $4,32($19)						\n\
+	ldq $5,32($20)						\n\
+	xor $25,$27,$27		# 8 cycles from $27 load	\n\
+								\n\
+	ldq $6,40($17)						\n\
+	ldq $7,40($18)						\n\
+	ldq $21,40($19)						\n\
+	ldq $22,40($20)						\n\
+								\n\
+	stq $24,16($17)						\n\
+	xor $0,$1,$1		# 9 cycles from $1 load		\n\
+	xor $2,$3,$3		# 5 cycles from $3 load		\n\
+	xor $27,$1,$1						\n\
+								\n\
+	stq $1,24($17)						\n\
+	xor $4,$5,$5		# 5 cycles from $5 load		\n\
+	ldq $23,48($17)						\n\
+	ldq $24,48($18)						\n\
+								\n\
+	ldq $25,48($19)						\n\
+	xor $3,$5,$5						\n\
+	ldq $27,48($20)						\n\
+	ldq $0,56($17)						\n\
+								\n\
+	ldq $1,56($18)						\n\
+	ldq $2,56($19)						\n\
+	xor $6,$7,$7		# 8 cycles from $6 load		\n\
+	ldq $3,56($20)						\n\
+								\n\
+	stq $5,32($17)						\n\
+	xor $21,$22,$22		# 8 cycles from $22 load	\n\
+	xor $7,$22,$22						\n\
+	xor $23,$24,$24		# 5 cycles from $24 load	\n\
+								\n\
+	stq $22,40($17)						\n\
+	xor $25,$27,$27		# 5 cycles from $27 load	\n\
+	xor $24,$27,$27						\n\
+	xor $0,$1,$1		# 5 cycles from $1 load		\n\
+								\n\
+	stq $27,48($17)						\n\
+	xor $2,$3,$3		# 4 cycles from $3 load		\n\
+	xor $1,$3,$3						\n\
+	subq $16,1,$16						\n\
+								\n\
+	stq $3,56($17)						\n\
+	addq $20,64,$20						\n\
+	addq $19,64,$19						\n\
+	addq $18,64,$18						\n\
+								\n\
+	addq $17,64,$17						\n\
+	bgt $16,4b						\n\
+	ret							\n\
+	.end xor_alpha_4					\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_5					\n\
+xor_alpha_5:							\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+	.align 4						\n\
+5:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,0($20)						\n\
+								\n\
+	ldq $4,0($21)						\n\
+	ldq $5,8($17)						\n\
+	ldq $6,8($18)						\n\
+	ldq $7,8($19)						\n\
+								\n\
+	ldq $22,8($20)						\n\
+	ldq $23,8($21)						\n\
+	ldq $24,16($17)						\n\
+	ldq $25,16($18)						\n\
+								\n\
+	ldq $27,16($19)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	ldq $28,16($20)						\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	ldq $0,16($21)						\n\
+	xor $1,$3,$3						\n\
+	ldq $1,24($17)						\n\
+	xor $3,$4,$4		# 7 cycles from $4 load		\n\
+								\n\
+	stq $4,0($17)						\n\
+	xor $5,$6,$6		# 7 cycles from $6 load		\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	xor $6,$23,$23		# 7 cycles from $23 load	\n\
+								\n\
+	ldq $2,24($18)						\n\
+	xor $22,$23,$23						\n\
+	ldq $3,24($19)						\n\
+	xor $24,$25,$25		# 8 cycles from $25 load	\n\
+								\n\
+	stq $23,8($17)						\n\
+	xor $25,$27,$27		# 8 cycles from $27 load	\n\
+	ldq $4,24($20)						\n\
+	xor $28,$0,$0		# 7 cycles from $0 load		\n\
+								\n\
+	ldq $5,24($21)						\n\
+	xor $27,$0,$0						\n\
+	ldq $6,32($17)						\n\
+	ldq $7,32($18)						\n\
+								\n\
+	stq $0,16($17)						\n\
+	xor $1,$2,$2		# 6 cycles from $2 load		\n\
+	ldq $22,32($19)						\n\
+	xor $3,$4,$4		# 4 cycles from $4 load		\n\
+								\n\
+	ldq $23,32($20)						\n\
+	xor $2,$4,$4						\n\
+	ldq $24,32($21)						\n\
+	ldq $25,40($17)						\n\
+								\n\
+	ldq $27,40($18)						\n\
+	ldq $28,40($19)						\n\
+	ldq $0,40($20)						\n\
+	xor $4,$5,$5		# 7 cycles from $5 load		\n\
+								\n\
+	stq $5,24($17)						\n\
+	xor $6,$7,$7		# 7 cycles from $7 load		\n\
+	ldq $1,40($21)						\n\
+	ldq $2,48($17)						\n\
+								\n\
+	ldq $3,48($18)						\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	ldq $4,48($19)						\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+								\n\
+	ldq $5,48($20)						\n\
+	xor $22,$24,$24						\n\
+	ldq $6,48($21)						\n\
+	xor $25,$27,$27		# 7 cycles from $27 load	\n\
+								\n\
+	stq $24,32($17)						\n\
+	xor $27,$28,$28		# 8 cycles from $28 load	\n\
+	ldq $7,56($17)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+								\n\
+	ldq $22,56($18)						\n\
+	ldq $23,56($19)						\n\
+	ldq $24,56($20)						\n\
+	ldq $25,56($21)						\n\
+								\n\
+	xor $28,$1,$1						\n\
+	xor $2,$3,$3		# 9 cycles from $3 load		\n\
+	xor $3,$4,$4		# 9 cycles from $4 load		\n\
+	xor $5,$6,$6		# 8 cycles from $6 load		\n\
+								\n\
+	stq $1,40($17)						\n\
+	xor $4,$6,$6						\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+								\n\
+	stq $6,48($17)						\n\
+	xor $22,$24,$24						\n\
+	subq $16,1,$16						\n\
+	xor $24,$25,$25		# 8 cycles from $25 load	\n\
+								\n\
+	stq $25,56($17)						\n\
+	addq $21,64,$21						\n\
+	addq $20,64,$20						\n\
+	addq $19,64,$19						\n\
+								\n\
+	addq $18,64,$18						\n\
+	addq $17,64,$17						\n\
+	bgt $16,5b						\n\
+	ret							\n\
+	.end xor_alpha_5					\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_prefetch_2				\n\
+xor_alpha_prefetch_2:						\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+								\n\
+	ldq $31, 0($17)						\n\
+	ldq $31, 0($18)						\n\
+								\n\
+	ldq $31, 64($17)					\n\
+	ldq $31, 64($18)					\n\
+								\n\
+	ldq $31, 128($17)					\n\
+	ldq $31, 128($18)					\n\
+								\n\
+	ldq $31, 192($17)					\n\
+	ldq $31, 192($18)					\n\
+	.align 4						\n\
+2:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,8($17)						\n\
+	ldq $3,8($18)						\n\
+								\n\
+	ldq $4,16($17)						\n\
+	ldq $5,16($18)						\n\
+	ldq $6,24($17)						\n\
+	ldq $7,24($18)						\n\
+								\n\
+	ldq $19,32($17)						\n\
+	ldq $20,32($18)						\n\
+	ldq $21,40($17)						\n\
+	ldq $22,40($18)						\n\
+								\n\
+	ldq $23,48($17)						\n\
+	ldq $24,48($18)						\n\
+	ldq $25,56($17)						\n\
+	ldq $27,56($18)						\n\
+								\n\
+	ldq $31,256($17)					\n\
+	xor $0,$1,$0		# 8 cycles from $1 load		\n\
+	ldq $31,256($18)					\n\
+	xor $2,$3,$2						\n\
+								\n\
+	stq $0,0($17)						\n\
+	xor $4,$5,$4						\n\
+	stq $2,8($17)						\n\
+	xor $6,$7,$6						\n\
+								\n\
+	stq $4,16($17)						\n\
+	xor $19,$20,$19						\n\
+	stq $6,24($17)						\n\
+	xor $21,$22,$21						\n\
+								\n\
+	stq $19,32($17)						\n\
+	xor $23,$24,$23						\n\
+	stq $21,40($17)						\n\
+	xor $25,$27,$25						\n\
+								\n\
+	stq $23,48($17)						\n\
+	subq $16,1,$16						\n\
+	stq $25,56($17)						\n\
+	addq $17,64,$17						\n\
+								\n\
+	addq $18,64,$18						\n\
+	bgt $16,2b						\n\
+	ret							\n\
+	.end xor_alpha_prefetch_2				\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_prefetch_3				\n\
+xor_alpha_prefetch_3:						\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+								\n\
+	ldq $31, 0($17)						\n\
+	ldq $31, 0($18)						\n\
+	ldq $31, 0($19)						\n\
+								\n\
+	ldq $31, 64($17)					\n\
+	ldq $31, 64($18)					\n\
+	ldq $31, 64($19)					\n\
+								\n\
+	ldq $31, 128($17)					\n\
+	ldq $31, 128($18)					\n\
+	ldq $31, 128($19)					\n\
+								\n\
+	ldq $31, 192($17)					\n\
+	ldq $31, 192($18)					\n\
+	ldq $31, 192($19)					\n\
+	.align 4						\n\
+3:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,8($17)						\n\
+								\n\
+	ldq $4,8($18)						\n\
+	ldq $6,16($17)						\n\
+	ldq $7,16($18)						\n\
+	ldq $21,24($17)						\n\
+								\n\
+	ldq $22,24($18)						\n\
+	ldq $24,32($17)						\n\
+	ldq $25,32($18)						\n\
+	ldq $5,8($19)						\n\
+								\n\
+	ldq $20,16($19)						\n\
+	ldq $23,24($19)						\n\
+	ldq $27,32($19)						\n\
+	nop							\n\
+								\n\
+	xor $0,$1,$1		# 8 cycles from $0 load		\n\
+	xor $3,$4,$4		# 7 cycles from $4 load		\n\
+	xor $6,$7,$7		# 6 cycles from $7 load		\n\
+	xor $21,$22,$22		# 5 cycles from $22 load	\n\
+								\n\
+	xor $1,$2,$2		# 9 cycles from $2 load		\n\
+	xor $24,$25,$25		# 5 cycles from $25 load	\n\
+	stq $2,0($17)						\n\
+	xor $4,$5,$5		# 6 cycles from $5 load		\n\
+								\n\
+	stq $5,8($17)						\n\
+	xor $7,$20,$20		# 7 cycles from $20 load	\n\
+	stq $20,16($17)						\n\
+	xor $22,$23,$23		# 7 cycles from $23 load	\n\
+								\n\
+	stq $23,24($17)						\n\
+	xor $25,$27,$27		# 7 cycles from $27 load	\n\
+	stq $27,32($17)						\n\
+	nop							\n\
+								\n\
+	ldq $0,40($17)						\n\
+	ldq $1,40($18)						\n\
+	ldq $3,48($17)						\n\
+	ldq $4,48($18)						\n\
+								\n\
+	ldq $6,56($17)						\n\
+	ldq $7,56($18)						\n\
+	ldq $2,40($19)						\n\
+	ldq $5,48($19)						\n\
+								\n\
+	ldq $20,56($19)						\n\
+	ldq $31,256($17)					\n\
+	ldq $31,256($18)					\n\
+	ldq $31,256($19)					\n\
+								\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	xor $3,$4,$4		# 5 cycles from $4 load		\n\
+	xor $6,$7,$7		# 5 cycles from $7 load		\n\
+	xor $1,$2,$2		# 4 cycles from $2 load		\n\
+								\n\
+	xor $4,$5,$5		# 5 cycles from $5 load		\n\
+	xor $7,$20,$20		# 4 cycles from $20 load	\n\
+	stq $2,40($17)						\n\
+	subq $16,1,$16						\n\
+								\n\
+	stq $5,48($17)						\n\
+	addq $19,64,$19						\n\
+	stq $20,56($17)						\n\
+	addq $18,64,$18						\n\
+								\n\
+	addq $17,64,$17						\n\
+	bgt $16,3b						\n\
+	ret							\n\
+	.end xor_alpha_prefetch_3				\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_prefetch_4				\n\
+xor_alpha_prefetch_4:						\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+								\n\
+	ldq $31, 0($17)						\n\
+	ldq $31, 0($18)						\n\
+	ldq $31, 0($19)						\n\
+	ldq $31, 0($20)						\n\
+								\n\
+	ldq $31, 64($17)					\n\
+	ldq $31, 64($18)					\n\
+	ldq $31, 64($19)					\n\
+	ldq $31, 64($20)					\n\
+								\n\
+	ldq $31, 128($17)					\n\
+	ldq $31, 128($18)					\n\
+	ldq $31, 128($19)					\n\
+	ldq $31, 128($20)					\n\
+								\n\
+	ldq $31, 192($17)					\n\
+	ldq $31, 192($18)					\n\
+	ldq $31, 192($19)					\n\
+	ldq $31, 192($20)					\n\
+	.align 4						\n\
+4:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,0($20)						\n\
+								\n\
+	ldq $4,8($17)						\n\
+	ldq $5,8($18)						\n\
+	ldq $6,8($19)						\n\
+	ldq $7,8($20)						\n\
+								\n\
+	ldq $21,16($17)						\n\
+	ldq $22,16($18)						\n\
+	ldq $23,16($19)						\n\
+	ldq $24,16($20)						\n\
+								\n\
+	ldq $25,24($17)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	ldq $27,24($18)						\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	ldq $0,24($19)						\n\
+	xor $1,$3,$3						\n\
+	ldq $1,24($20)						\n\
+	xor $4,$5,$5		# 7 cycles from $5 load		\n\
+								\n\
+	stq $3,0($17)						\n\
+	xor $6,$7,$7						\n\
+	xor $21,$22,$22		# 7 cycles from $22 load	\n\
+	xor $5,$7,$7						\n\
+								\n\
+	stq $7,8($17)						\n\
+	xor $23,$24,$24		# 7 cycles from $24 load	\n\
+	ldq $2,32($17)						\n\
+	xor $22,$24,$24						\n\
+								\n\
+	ldq $3,32($18)						\n\
+	ldq $4,32($19)						\n\
+	ldq $5,32($20)						\n\
+	xor $25,$27,$27		# 8 cycles from $27 load	\n\
+								\n\
+	ldq $6,40($17)						\n\
+	ldq $7,40($18)						\n\
+	ldq $21,40($19)						\n\
+	ldq $22,40($20)						\n\
+								\n\
+	stq $24,16($17)						\n\
+	xor $0,$1,$1		# 9 cycles from $1 load		\n\
+	xor $2,$3,$3		# 5 cycles from $3 load		\n\
+	xor $27,$1,$1						\n\
+								\n\
+	stq $1,24($17)						\n\
+	xor $4,$5,$5		# 5 cycles from $5 load		\n\
+	ldq $23,48($17)						\n\
+	xor $3,$5,$5						\n\
+								\n\
+	ldq $24,48($18)						\n\
+	ldq $25,48($19)						\n\
+	ldq $27,48($20)						\n\
+	ldq $0,56($17)						\n\
+								\n\
+	ldq $1,56($18)						\n\
+	ldq $2,56($19)						\n\
+	ldq $3,56($20)						\n\
+	xor $6,$7,$7		# 8 cycles from $6 load		\n\
+								\n\
+	ldq $31,256($17)					\n\
+	xor $21,$22,$22		# 8 cycles from $22 load	\n\
+	ldq $31,256($18)					\n\
+	xor $7,$22,$22						\n\
+								\n\
+	ldq $31,256($19)					\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+	ldq $31,256($20)					\n\
+	xor $25,$27,$27		# 6 cycles from $27 load	\n\
+								\n\
+	stq $5,32($17)						\n\
+	xor $24,$27,$27						\n\
+	xor $0,$1,$1		# 7 cycles from $1 load		\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	stq $22,40($17)						\n\
+	xor $1,$3,$3						\n\
+	stq $27,48($17)						\n\
+	subq $16,1,$16						\n\
+								\n\
+	stq $3,56($17)						\n\
+	addq $20,64,$20						\n\
+	addq $19,64,$19						\n\
+	addq $18,64,$18						\n\
+								\n\
+	addq $17,64,$17						\n\
+	bgt $16,4b						\n\
+	ret							\n\
+	.end xor_alpha_prefetch_4				\n\
+								\n\
+	.align 3						\n\
+	.ent xor_alpha_prefetch_5				\n\
+xor_alpha_prefetch_5:						\n\
+	.prologue 0						\n\
+	srl $16, 6, $16						\n\
+								\n\
+	ldq $31, 0($17)						\n\
+	ldq $31, 0($18)						\n\
+	ldq $31, 0($19)						\n\
+	ldq $31, 0($20)						\n\
+	ldq $31, 0($21)						\n\
+								\n\
+	ldq $31, 64($17)					\n\
+	ldq $31, 64($18)					\n\
+	ldq $31, 64($19)					\n\
+	ldq $31, 64($20)					\n\
+	ldq $31, 64($21)					\n\
+								\n\
+	ldq $31, 128($17)					\n\
+	ldq $31, 128($18)					\n\
+	ldq $31, 128($19)					\n\
+	ldq $31, 128($20)					\n\
+	ldq $31, 128($21)					\n\
+								\n\
+	ldq $31, 192($17)					\n\
+	ldq $31, 192($18)					\n\
+	ldq $31, 192($19)					\n\
+	ldq $31, 192($20)					\n\
+	ldq $31, 192($21)					\n\
+	.align 4						\n\
+5:								\n\
+	ldq $0,0($17)						\n\
+	ldq $1,0($18)						\n\
+	ldq $2,0($19)						\n\
+	ldq $3,0($20)						\n\
+								\n\
+	ldq $4,0($21)						\n\
+	ldq $5,8($17)						\n\
+	ldq $6,8($18)						\n\
+	ldq $7,8($19)						\n\
+								\n\
+	ldq $22,8($20)						\n\
+	ldq $23,8($21)						\n\
+	ldq $24,16($17)						\n\
+	ldq $25,16($18)						\n\
+								\n\
+	ldq $27,16($19)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+	ldq $28,16($20)						\n\
+	xor $2,$3,$3		# 6 cycles from $3 load		\n\
+								\n\
+	ldq $0,16($21)						\n\
+	xor $1,$3,$3						\n\
+	ldq $1,24($17)						\n\
+	xor $3,$4,$4		# 7 cycles from $4 load		\n\
+								\n\
+	stq $4,0($17)						\n\
+	xor $5,$6,$6		# 7 cycles from $6 load		\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	xor $6,$23,$23		# 7 cycles from $23 load	\n\
+								\n\
+	ldq $2,24($18)						\n\
+	xor $22,$23,$23						\n\
+	ldq $3,24($19)						\n\
+	xor $24,$25,$25		# 8 cycles from $25 load	\n\
+								\n\
+	stq $23,8($17)						\n\
+	xor $25,$27,$27		# 8 cycles from $27 load	\n\
+	ldq $4,24($20)						\n\
+	xor $28,$0,$0		# 7 cycles from $0 load		\n\
+								\n\
+	ldq $5,24($21)						\n\
+	xor $27,$0,$0						\n\
+	ldq $6,32($17)						\n\
+	ldq $7,32($18)						\n\
+								\n\
+	stq $0,16($17)						\n\
+	xor $1,$2,$2		# 6 cycles from $2 load		\n\
+	ldq $22,32($19)						\n\
+	xor $3,$4,$4		# 4 cycles from $4 load		\n\
+								\n\
+	ldq $23,32($20)						\n\
+	xor $2,$4,$4						\n\
+	ldq $24,32($21)						\n\
+	ldq $25,40($17)						\n\
+								\n\
+	ldq $27,40($18)						\n\
+	ldq $28,40($19)						\n\
+	ldq $0,40($20)						\n\
+	xor $4,$5,$5		# 7 cycles from $5 load		\n\
+								\n\
+	stq $5,24($17)						\n\
+	xor $6,$7,$7		# 7 cycles from $7 load		\n\
+	ldq $1,40($21)						\n\
+	ldq $2,48($17)						\n\
+								\n\
+	ldq $3,48($18)						\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	ldq $4,48($19)						\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+								\n\
+	ldq $5,48($20)						\n\
+	xor $22,$24,$24						\n\
+	ldq $6,48($21)						\n\
+	xor $25,$27,$27		# 7 cycles from $27 load	\n\
+								\n\
+	stq $24,32($17)						\n\
+	xor $27,$28,$28		# 8 cycles from $28 load	\n\
+	ldq $7,56($17)						\n\
+	xor $0,$1,$1		# 6 cycles from $1 load		\n\
+								\n\
+	ldq $22,56($18)						\n\
+	ldq $23,56($19)						\n\
+	ldq $24,56($20)						\n\
+	ldq $25,56($21)						\n\
+								\n\
+	ldq $31,256($17)					\n\
+	xor $28,$1,$1						\n\
+	ldq $31,256($18)					\n\
+	xor $2,$3,$3		# 9 cycles from $3 load		\n\
+								\n\
+	ldq $31,256($19)					\n\
+	xor $3,$4,$4		# 9 cycles from $4 load		\n\
+	ldq $31,256($20)					\n\
+	xor $5,$6,$6		# 8 cycles from $6 load		\n\
+								\n\
+	stq $1,40($17)						\n\
+	xor $4,$6,$6						\n\
+	xor $7,$22,$22		# 7 cycles from $22 load	\n\
+	xor $23,$24,$24		# 6 cycles from $24 load	\n\
+								\n\
+	stq $6,48($17)						\n\
+	xor $22,$24,$24						\n\
+	ldq $31,256($21)					\n\
+	xor $24,$25,$25		# 8 cycles from $25 load	\n\
+								\n\
+	stq $25,56($17)						\n\
+	subq $16,1,$16						\n\
+	addq $21,64,$21						\n\
+	addq $20,64,$20						\n\
+								\n\
+	addq $19,64,$19						\n\
+	addq $18,64,$18						\n\
+	addq $17,64,$17						\n\
+	bgt $16,5b						\n\
+								\n\
+	ret							\n\
+	.end xor_alpha_prefetch_5				\n\
+");
+
+static struct xor_block_template xor_block_alpha = {
+	.name	= "alpha",
+	.do_2	= xor_alpha_2,
+	.do_3	= xor_alpha_3,
+	.do_4	= xor_alpha_4,
+	.do_5	= xor_alpha_5,
+};
+
+static struct xor_block_template xor_block_alpha_prefetch = {
+	.name	= "alpha prefetch",
+	.do_2	= xor_alpha_prefetch_2,
+	.do_3	= xor_alpha_prefetch_3,
+	.do_4	= xor_alpha_prefetch_4,
+	.do_5	= xor_alpha_prefetch_5,
+};
+
+/* For grins, also test the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_8regs);		\
+		xor_speed(&xor_block_32regs);		\
+		xor_speed(&xor_block_alpha);		\
+		xor_speed(&xor_block_alpha_prefetch);	\
+	} while (0)
+
+/* Force the use of alpha_prefetch if EV6, as it is significantly
+   faster in the cold cache case.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+	(implver() == IMPLVER_EV6 ? &xor_block_alpha_prefetch : FASTEST)
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 32ca1b92730..8509dad3120 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -121,24 +121,29 @@ osf_filldir(void *__buf, const char *name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	if (buf->basep) {
 		if (put_user(offset, buf->basep))
-			return -EFAULT;
+			goto Efault;
 		buf->basep = NULL;
 	}
 	dirent = buf->dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(namlen, &dirent->d_namlen);
-	put_user(reclen, &dirent->d_reclen);
-	if (copy_to_user(dirent->d_name, name, namlen) ||
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
 	    put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
+		goto Efault;
 	dirent = (void __user *)dirent + reclen;
 	buf->dirent = dirent;
 	buf->count -= reclen;
 	return 0;
+Efault:
+	buf->error = -EFAULT;
+	return -EFAULT;
 }
 
 asmlinkage int
@@ -253,15 +258,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
 }
 
 asmlinkage int
-osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz)
+osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz)
 {
-	struct nameidata nd;
+	struct path path;
 	int retval;
 
-	retval = user_path_walk(path, &nd);
+	retval = user_path(pathname, &path);
 	if (!retval) {
-		retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz);
-		path_put(&nd.path);
+		retval = do_osf_statfs(path.dentry, buffer, bufsiz);
+		path_put(&path);
 	}
 	return retval;
 }
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 40c15e7301d..234e42b8ee7 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -94,36 +94,6 @@ __bad_page(void)
 	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
 }
 
-#ifndef CONFIG_DISCONTIGMEM
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
-#endif
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10ab7833e83..a13de49d126 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -19,7 +19,6 @@
 #include <asm/pgalloc.h>
 
 pg_data_t node_data[MAX_NUMNODES];
-bootmem_data_t node_bdata[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
 
 #undef DEBUG_DISCONTIG
@@ -141,7 +140,7 @@ setup_memory_node(int nid, void *kernel_end)
 		printk(" not enough mem to reserve NODE_DATA");
 		return;
 	}
-	NODE_DATA(nid)->bdata = &node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 
 	printk(" Detected node memory:   start %8lu, end %8lu\n",
 	       node_min_pfn, node_max_pfn);
@@ -304,8 +303,9 @@ void __init paging_init(void)
 	dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
 	for_each_online_node(nid) {
-		unsigned long start_pfn = node_bdata[nid].node_boot_start >> PAGE_SHIFT;
-		unsigned long end_pfn = node_bdata[nid].node_low_pfn;
+		bootmem_data_t *bdata = &bootmem_node_data[nid];
+		unsigned long start_pfn = bdata->node_min_pfn;
+		unsigned long end_pfn = bdata->node_low_pfn;
 
 		if (dma_local_pfn >= end_pfn - start_pfn)
 			zones_size[ZONE_DMA] = end_pfn - start_pfn;
@@ -313,7 +313,7 @@ void __init paging_init(void)
 			zones_size[ZONE_DMA] = dma_local_pfn;
 			zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
 		}
-		free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, NULL);
+		free_area_init_node(nid, zones_size, start_pfn, NULL);
 	}
 
 	/* Initialize the kernel's ZERO_PGE. */
@@ -359,38 +359,3 @@ void __init mem_init(void)
 	mem_stress();
 #endif
 }
-
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-	int nid;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_node(nid) {
-		unsigned long flags;
-		pgdat_resize_lock(NODE_DATA(nid), &flags);
-		i = node_spanned_pages(nid);
-		while (i-- > 0) {
-			struct page *page = nid_page_nr(nid, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(NODE_DATA(nid), &flags);
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c7ad324ddf2..70dba166890 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,10 +12,12 @@ config ARM
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FTRACE if (!XIP_KERNEL)
 	select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -197,12 +199,14 @@ choice
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
 	select ARM_AMBA
+	select HAVE_CLK
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select HAVE_CLK
 	select ICST525
 	help
 	  Support for ARM's Integrator platform.
@@ -210,6 +214,7 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
+	select HAVE_CLK
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -220,6 +225,7 @@ config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	select ARM_AMBA
 	select ARM_VIC
+	select HAVE_CLK
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -229,6 +235,7 @@ config ARCH_VERSATILE
 config ARCH_AT91
 	bool "Atmel AT91"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -261,7 +268,8 @@ config ARCH_EP93XX
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -307,7 +315,7 @@ config ARCH_IOP32X
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -318,7 +326,7 @@ config ARCH_IOP33X
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -380,6 +388,7 @@ config ARCH_NS9XXX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	help
 	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
 	  System.
@@ -410,7 +419,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -429,6 +438,7 @@ config ARCH_ORION5X
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
+	select HAVE_CLK
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -437,7 +447,8 @@ config ARCH_PXA
 	depends on MMU
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -467,14 +478,16 @@ config ARCH_SA1100
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	select TICK_ONESHOT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -502,13 +515,15 @@ config ARCH_DAVINCI
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  Support for TI's DaVinci platform.
 
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -795,6 +810,11 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
+config ARCH_FLATMEM_HAS_HOLES
+	bool
+	default y
+	depends on FLATMEM
+
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
 	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
@@ -1210,6 +1230,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/regulator/Kconfig"
+
 source "drivers/uio/Kconfig"
 
 endmenu
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b20995a82e0..703a44fa0f9 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946T)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
 tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
@@ -97,9 +97,7 @@ textofs-y	:= 0x00008000
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
  machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
-  incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
-  incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -114,13 +112,15 @@ endif
  machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
  machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
  machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
+    plat-$(CONFIG_PLAT_IOP)	   := iop
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
-  incdir-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
+    plat-$(CONFIG_ARCH_OMAP)	   := omap
+ machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)	   := imx
@@ -135,10 +135,11 @@ endif
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
  machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
-  incdir-$(CONFIG_ARCH_MXC)	   := mxc
+    plat-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
+    plat-$(CONFIG_PLAT_ORION)	   := orion
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
@@ -153,17 +154,22 @@ endif
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-ifeq ($(incdir-y),)
-incdir-y := $(machine-y)
-endif
-INCDIR   := arch-$(incdir-y)
-
+# The first directory contains additional information for the boot setup code
 ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(machine-y)/
+MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
 else
 MACHINE  :=
 endif
 
+machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
+platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
+
+ifeq ($(KBUILD_SRC),)
+KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
+else
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
+endif
+
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
@@ -174,23 +180,11 @@ endif
 
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= $(MACHINE)
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2443/
+core-y				+= $(machdirs) $(platdirs)
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
-# If we have a common platform directory, then include it in the build.
-core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
-core-$(CONFIG_PLAT_ORION)		+= arch/arm/plat-orion/
-core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
-core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
-core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/
-
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
@@ -210,20 +204,10 @@ boot := arch/arm/boot
 #	them changed.  We use .arch to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
-include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-arm
-	$(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch
-else
-	$(Q)ln -fsn $(INCDIR) include/asm-arm/arch
-endif
-	@touch $@
-
 archprepare: maketools
 
 PHONY += maketools FORCE
-maketools: include/linux/version.h include/asm-arm/.arch FORCE
+maketools: include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
 # Convert bzImage to zImage
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index b15f927a592..ab204db594d 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,2 +1,3 @@
-piggy.gz
 font.c
+piggy.gz
+vmlinux.lds
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 95baac4939e..94462a097f8 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -112,6 +112,3 @@ $(obj)/font.c: $(FONTC)
 
 $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
 	@sed "$(SEDFLAGS)" < $< > $@
-
-$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c
-
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index dd3fbd6766e..aa5ee49c5c5 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -6,7 +6,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/mach-types.h>
 
 		.section        ".start", "ax"
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index de41daeab5e..d42f89b7760 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -37,7 +37,7 @@
 
 #else
 
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9b444022cb9..65ce8fff29d 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -27,7 +27,7 @@ unsigned int __machine_arch_type;
 static void putstr(const char *ptr);
 
 #include <linux/compiler.h>
-#include <asm/arch/uncompress.h>
+#include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
@@ -217,8 +217,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern char input_data_end[];
@@ -227,64 +225,21 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void putstr(const char *);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
-#define HEAP_SIZE 0x3000
-
-#include "../../../../lib/inflate.c"
-
-#ifndef STANDALONE_DEBUG
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	arch_decomp_wdog();
-	*ptr = (void *) free_mem_ptr;
-}
+#ifdef STANDALONE_DEBUG
+#define NO_INFLATE_MALLOC
+#endif
 
-static void gzip_release(void **ptr)
-{
-	arch_decomp_wdog();
-	free_mem_ptr = (long) *ptr;
-}
-#else
-static void gzip_mark(void **ptr)
-{
-}
+#define ARCH_HAS_DECOMP_WDOG
 
-static void gzip_release(void **ptr)
-{
-}
-#endif
+#include "../../../../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
@@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
 {
 	output_data		= (uch *)output_start;	/* Points to kernel start */
 	free_mem_ptr		= free_mem_ptr_p;
-	free_mem_ptr_end	= free_mem_ptr_end_p;
+	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
 	arch_decomp_setup();
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2744673314b..aecc6c3f908 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -246,9 +246,9 @@ map_single(struct device *dev, void *ptr, size_t size,
 		}
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		if ((dir == DMA_TO_DEVICE) ||
 		    (dir == DMA_BIDIRECTIONAL)) {
@@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	/*
 	 * Trying to unmap an invalid mapping
 	 */
-	if (dma_mapping_error(dma_addr)) {
+	if (dma_mapping_error(dev, dma_addr)) {
 		dev_err(dev, "Trying to unmap invalid mapping\n");
 		return;
 	}
@@ -292,9 +292,9 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		BUG_ON(buf->size != size);
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		DO_STATS ( device_info->bounce_count++ );
 
@@ -321,9 +321,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	}
 }
 
-static inline void
-sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir)
+static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+			enum dma_data_direction dir)
 {
 	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	struct safe_buffer *buf = NULL;
@@ -355,9 +354,9 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 */
 
 		dev_dbg(dev,
-			"%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
-			__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
-			buf->safe, (void *) buf->safe_dma_addr);
+			"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+			__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+			buf->safe, buf->safe_dma_addr);
 
 		DO_STATS ( device_info->bounce_count++ );
 
@@ -383,8 +382,9 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 * No need to sync the safe buffer - it was allocated
 		 * via the coherent allocators.
 		 */
+		return 0;
 	} else {
-		dma_cache_maint(dma_to_virt(dev, dma_addr), size, dir);
+		return 1;
 	}
 }
 
@@ -474,25 +474,29 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
 	}
 }
 
-void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr, size_t size,
-				enum dma_data_direction dir)
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction dir)
 {
-	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
-		__func__, (void *) dma_addr, size, dir);
+	dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+		__func__, dma_addr, offset, size, dir);
 
-	sync_single(dev, dma_addr, size, dir);
+	if (sync_single(dev, dma_addr, offset + size, dir))
+		dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
 }
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
 
-void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_addr, size_t size,
-				enum dma_data_direction dir)
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir)
 {
-	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
-		__func__, (void *) dma_addr, size, dir);
+	dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+		__func__, dma_addr, offset, size, dir);
 
-	sync_single(dev, dma_addr, size, dir);
+	if (sync_single(dev, dma_addr, offset + size, dir))
+		dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
 }
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
 
 void
 dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
@@ -554,9 +558,8 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
 	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
 	if (!device_info) {
-		printk(KERN_ERR
-			"Could not allocated dmabounce_device_info for %s",
-			dev->bus_id);
+		dev_err(dev,
+			"Could not allocated dmabounce_device_info\n");
 		return -ENOMEM;
 	}
 
@@ -594,8 +597,7 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
 	dev->archdata.dmabounce = device_info;
 
-	printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
-		dev->bus_id, dev->bus->name);
+	dev_info(dev, "dmabounce: registered device\n");
 
 	return 0;
 
@@ -614,16 +616,15 @@ dmabounce_unregister_dev(struct device *dev)
 	dev->archdata.dmabounce = NULL;
 
 	if (!device_info) {
-		printk(KERN_WARNING
-			"%s: Never registered with dmabounce but attempting" \
-			"to unregister!\n", dev->bus_id);
+		dev_warn(dev,
+			 "Never registered with dmabounce but attempting"
+			 "to unregister!\n");
 		return;
 	}
 
 	if (!list_empty(&device_info->safe_buffers)) {
-		printk(KERN_ERR
-			"%s: Removing from dmabounce with pending buffers!\n",
-			dev->bus_id);
+		dev_err(dev,
+			"Removing from dmabounce with pending buffers!\n");
 		BUG();
 	}
 
@@ -639,8 +640,7 @@ dmabounce_unregister_dev(struct device *dev)
 
 	kfree(device_info);
 
-	printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
-		dev->bus_id, dev->bus->name);
+	dev_info(dev, "dmabounce: device unregistered\n");
 }
 
 
@@ -648,8 +648,6 @@ EXPORT_SYMBOL(dma_map_single);
 EXPORT_SYMBOL(dma_unmap_single);
 EXPORT_SYMBOL(dma_map_sg);
 EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
-EXPORT_SYMBOL(dma_sync_single_for_device);
 EXPORT_SYMBOL(dma_sync_sg_for_cpu);
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 EXPORT_SYMBOL(dmabounce_register_dev);
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index d973c986f72..283051eaf93 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type)
 
 	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= mask;
 	else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= mask;
 	else
 		GPIO_IRQ_falling_edge &= ~mask;
@@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	/*
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
-	set_irq_type(lchip->irq, IRQT_FALLING);
+	set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
 	set_irq_chip_data(lchip->irq, irqbase);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 
@@ -543,7 +543,6 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		goto out;
 	}
 
-	strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@@ -553,6 +552,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		dev->dev.dma_mask = &dev->dma_mask;
 	}
 
+	dev_set_name(&dev->dev, "%s", info->name);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = lchip->dev;
 	dev->dev.bus     = &locomo_bus_type;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index eb06d0b2cb7..ec8a5471bf0 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,7 +26,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip0 &= ~mask;
 	else
 		ip0 |= mask;
@@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip1 &= ~mask;
 	else
 		ip1 |= mask;
@@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	/*
 	 * Register SA1111 interrupt
 	 */
-	set_irq_type(sachip->irq, IRQT_RISING);
+	set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 	set_irq_data(sachip->irq, irqbase);
 	set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
@@ -550,9 +550,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		goto out;
 	}
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
-		 "%4.4lx", info->offset);
-
+	dev_set_name(&dev->dev, "%4.4lx", info->offset);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = sachip->dev;
 	dev->dev.bus     = &sa1111_bus_type;
@@ -560,7 +558,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 	dev->res.start   = sachip->phys + info->offset;
 	dev->res.end     = dev->res.start + 511;
-	dev->res.name    = dev->dev.bus_id;
+	dev->res.name    = dev_name(&dev->dev);
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
 	dev->skpcr_mask  = info->skpcr_mask;
@@ -570,6 +568,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	if (ret) {
 		printk("SA1111: failed to allocate resource for %s\n",
 			dev->res.name);
+		dev_set_name(&dev->dev, NULL);
 		kfree(dev);
 		goto out;
 	}
@@ -593,7 +592,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		if (dev->dma_mask != 0xffffffffUL) {
 			ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
 			if (ret) {
-				printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
+				dev_err(&dev->dev, "SA1111: Failed to register"
+					" with dmabounce\n");
 				device_unregister(&dev->dev);
 			}
 		}
@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (!sachip)
 		return -ENOMEM;
 
-	sachip->clk = clk_get(me, "GPIO27_CLK");
+	sachip->clk = clk_get(me, "SA1111_CLK");
 	if (!sachip->clk) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index bc299b07a6f..ae39553589d 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -247,7 +247,7 @@ static int __devinit scoop_probe(struct platform_device *pdev)
 	devptr->gpio.base = -1;
 
 	if (inf->gpio_base != 0) {
-		devptr->gpio.label = pdev->dev.bus_id;
+		devptr->gpio.label = dev_name(&pdev->dev);
 		devptr->gpio.base = inf->gpio_base;
 		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
 		devptr->gpio.set = scoop_gpio_set;
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 8822b684d47..db830916140 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -26,13 +26,12 @@
 #include <linux/apm-emulation.h>
 #include <linux/suspend.h>
 
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
 /*
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index d544da41473..df0983aafe6 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -18,7 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index 117cab30bd3..7ecd3c0ab01 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -16,8 +16,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/hardware.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/uengine.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
new file mode 100644
index 00000000000..2c4aa11f0b0
--- /dev/null
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 04:28:32 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=m
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+CONFIG_MACH_AMS_DELTA=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+CONFIG_OMAP_ARM_150MHZ=y
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_AMS_DELTA=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_AMS_DELTA=y
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index be2b2f38fd9..bf97801a106 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 2011adfa675..38e6a0abeb4 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4049768962d..93b779f94b4 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index fa1c5aecb5a..a7ddd94363c 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index c0686384736..df0d6ee672b 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index d8ec5f9ca6e..1c76642272a 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index f3cd4a95373..f945105d6cd 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set
-CONFIG_MTD_NAND_AT91_ECC_HW=y
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 493ecee24f9..2307587a38a 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,15 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh17
-# Fri Nov  9 20:23:03 2007
+# Linux kernel version: 2.6.26
+# Sat Jul 26 22:28:46 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
@@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
-CONFIG_TOSHIBA_TMIO_OHCI=y
-CONFIG_ARCH_ESERIES=y
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_ARCH_PXA_ESERIES=y
 CONFIG_MACH_E330=y
+CONFIG_MACH_E350=y
 CONFIG_MACH_E740=y
 CONFIG_MACH_E750=y
 CONFIG_MACH_E400=y
 CONFIG_MACH_E800=y
-CONFIG_E330_LCD=y
-CONFIG_E740_LCD=y
-CONFIG_E750_LCD=y
-CONFIG_E400_LCD=y
-CONFIG_E800_LCD=y
-CONFIG_ESERIES_UDC=y
-CONFIG_E330_TC6387XB=y
-CONFIG_E740_T7L66XB=y
-CONFIG_E400_T7L66XB=y
-CONFIG_E750_E800_TC6393XB=y
-CONFIG_E740_PCMCIA=m
-CONFIG_E750_PCMCIA=m
-CONFIG_E800_PCMCIA=m
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXC550 is not set
-# CONFIG_PXA_SHARPSL is not set
 # CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA25x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
 
 #
-# Linux As Bootloader
+# Power management
 #
-# CONFIG_LAB is not set
 
 #
 # Processor Type
@@ -215,6 +208,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
 CONFIG_PCMCIA_LOAD_CIS=y
@@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-CONFIG_PCMCIA_PXA2XX=m
 
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
+CONFIG_ATAGS_PROC=y
 
 #
 # CPU Frequency scaling
@@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-# CONFIG_DPM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -318,13 +318,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=y
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_PARTITIONS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
 # CONFIG_MTD_BLOCK_RO is not set
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -565,7 +579,7 @@ CONFIG_SCSI=m
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=m
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
@@ -579,6 +593,7 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -586,132 +601,78 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
 # CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
+# CONFIG_LIBERTAS is not set
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
 # CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_PXA is not set
-# CONFIG_RS232_SERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
 
 #
 # PCMCIA character devices
@@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
+# I2C GPIO expanders:
 #
 
 #
-# Multimedia Capabilities Port drivers
+# PCI GPIO expanders:
 #
-# CONFIG_ADC is not set
 
 #
-# Compaq/iPAQ Drivers
+# SPI GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Compaq/HP iPAQ Drivers
+# Sonics Silicon Backplane
 #
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-CONFIG_SOC_T7L66XB=y
-# CONFIG_SOC_TC6387XB is not set
-CONFIG_SOC_TC6393XB=y
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_MFD_TC6393XB=y
 
 #
-# LED Triggers
+# Multimedia devices
 #
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # Frame buffer hardware drivers
 #
-# CONFIG_FB_IMAGEON is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
+# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -938,6 +871,7 @@ CONFIG_FB_W100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
@@ -945,28 +879,13 @@ CONFIG_FONTS=y
 # CONFIG_FONT_6x11 is not set
 # CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
-CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
+CONFIG_SND_ARM=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC_AC97_BUS=y
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
 CONFIG_SND_PXA2XX_SOC_AC97=m
-CONFIG_SND_PXA2XX_SOC_E740_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E750_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E800_WM9712=m
-# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
-# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
-# CONFIG_SND_PXA2XX_SOC_H5000 is not set
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-CONFIG_SND_SOC_WM9705=m
-# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_PXA2XX_SOC_E800=m
 CONFIG_SND_SOC_WM9712=m
-# CONFIG_SND_SOC_UDA1380 is not set
-# CONFIG_SND_SOC_AK4535 is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=y
+CONFIG_USB_PXA25X_SMALL=y
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
 
 #
-# MMC/SD Card support
+# MMC/SD Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-CONFIG_MMC_TMIO=y
-# CONFIG_MMC_SAMCOP is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
new file mode 100644
index 00000000000..2a84d557adc
--- /dev/null
+++ b/arch/arm/configs/ezx_defconfig
@@ -0,0 +1,1614 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc3
+# Mon Jul  7 17:52:21 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_PXA_EZX=y
+CONFIG_MACH_EZX_A780=y
+CONFIG_MACH_EZX_E680=y
+CONFIG_MACH_EZX_A1200=y
+CONFIG_MACH_EZX_A910=y
+CONFIG_MACH_EZX_E6=y
+CONFIG_MACH_EZX_E2=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_EZX_PCAP=y
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_PXA27x is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
new file mode 100644
index 00000000000..568ef1770d5
--- /dev/null
+++ b/arch/arm/configs/n770_defconfig
@@ -0,0 +1,1421 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8-omap1
+# Fri Jan 18 10:21:06 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+CONFIG_OMAP_COMPONENT_VERSION=y
+CONFIG_OMAP_GPIO_SWITCH=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_STI=y
+CONFIG_OMAP_STI_CONSOLE=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+CONFIG_MACH_NOKIA770=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+CONFIG_OMAP_ARM_216MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIBRF6150=y
+# CONFIG_BT_HCIH4P is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP_HW=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_TLV320AIC23=y
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCDC_EXTERNAL=y
+CONFIG_FB_OMAP_LCDC_HWA742=y
+# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
+CONFIG_FB_OMAP_MANUAL_UPDATE=y
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=y
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_OMAP_AIC23=y
+# CONFIG_SND_OMAP_TSC2101 is not set
+# CONFIG_SND_SX1 is not set
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+CONFIG_CBUS=y
+CONFIG_CBUS_TAHVO=y
+CONFIG_CBUS_TAHVO_USER=y
+CONFIG_CBUS_TAHVO_USB=y
+# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
+CONFIG_CBUS_RETU=y
+CONFIG_CBUS_RETU_USER=y
+CONFIG_CBUS_RETU_POWERBUTTON=y
+CONFIG_CBUS_RETU_RTC=y
+CONFIG_CBUS_RETU_WDT=y
+# CONFIG_CBUS_RETU_HEADSET is not set
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
new file mode 100644
index 00000000000..b0617c0da2a
--- /dev/null
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -0,0 +1,1304 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:47:37 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+# CONFIG_OMAP_MUX_WARNINGS is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+# CONFIG_ARCH_OMAP2420 is not set
+CONFIG_ARCH_OMAP2430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+CONFIG_MACH_OMAP_2430SDP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OMAP is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_GPIO=y
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MENELAUS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_OMAP24XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 243x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP_HS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
new file mode 100644
index 00000000000..bb39dfc72d6
--- /dev/null
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -0,0 +1,962 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:07:29 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+CONFIG_MACH_OMAP_APOLLON=y
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OMAP2 is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
new file mode 100644
index 00000000000..4b1c252f209
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -0,0 +1,1172 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:20:19 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
new file mode 100644
index 00000000000..fc66f019d56
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -0,0 +1,1178 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:01:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
new file mode 100644
index 00000000000..0a00a708a4f
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -0,0 +1,1088 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:02:08 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARTHUR=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+# CONFIG_USB_AN2720 is not set
+# CONFIG_USB_BELKIN is not set
+# CONFIG_USB_ARMLINUX is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
new file mode 100644
index 00000000000..cf4073b47aa
--- /dev/null
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -0,0 +1,655 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:48 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 323c1deeb95..c03507202f3 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar  3 03:39:48 2008
+# Linux kernel version: 2.6.25-rc2-omap1
+# Wed Feb 20 17:12:36 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -31,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
@@ -50,7 +49,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -65,6 +64,7 @@ CONFIG_SYSCTL=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -165,20 +165,28 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
 # CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 # CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
 CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
 CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
@@ -206,10 +214,10 @@ CONFIG_MACH_OMAP_H2=y
 #
 # CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 # CONFIG_OMAP_ARM_216MHZ is not set
-CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
 # CONFIG_OMAP_ARM_168MHZ is not set
 # CONFIG_OMAP_ARM_120MHZ is not set
-# CONFIG_OMAP_ARM_60MHZ is not set
+CONFIG_OMAP_ARM_60MHZ=y
 # CONFIG_OMAP_ARM_30MHZ is not set
 
 #
@@ -227,6 +235,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -257,10 +266,9 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
+# CONFIG_PREEMPT is not set
 CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -275,7 +283,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -283,7 +292,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 # CONFIG_ATAGS_PROC is not set
@@ -291,20 +300,7 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
 #
 # CPU Frequency scaling
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ is not set
 
 #
 # Floating point emulation
@@ -322,8 +318,9 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -433,21 +430,102 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+CONFIG_DEBUG_DRIVER=y
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -457,42 +535,9 @@ CONFIG_MISC_DEVICES=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -509,6 +554,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -523,6 +569,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -612,7 +667,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -638,6 +694,7 @@ CONFIG_I2C_OMAP=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -647,8 +704,10 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_ISP1301_OMAP=y
 CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -659,8 +718,26 @@ CONFIG_TPS65010=y
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_TSC2101=y
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -673,7 +750,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -683,6 +759,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -712,6 +789,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_TSC210X is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
@@ -723,6 +801,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_OMAP_WATCHDOG is not set
 
 #
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
 # Sonics Silicon Backplane
 #
 CONFIG_SSB_POSSIBLE=y
@@ -740,6 +823,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -749,9 +833,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -769,7 +853,11 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -785,17 +873,9 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
+# CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -804,37 +884,204 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-CONFIG_SOUND=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Advanced Linux Sound Architecture
+# USB Input Devices
 #
-# CONFIG_SND is not set
+# CONFIG_USB_HID is not set
 
 #
-# Open Sound System
+# USB HID Boot Protocol drivers
 #
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+# CONFIG_OMAP_DSP is not set
 
 #
 # File systems
@@ -894,6 +1141,17 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -904,19 +1162,16 @@ CONFIG_ROMFS_FS=y
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
 # CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -981,11 +1236,38 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
@@ -994,31 +1276,29 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
 # CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_GCM is not set
 # CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -1052,6 +1332,7 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
new file mode 100644
index 00000000000..5bc89185a64
--- /dev/null
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -0,0 +1,1120 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:58 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_DEVICES=y
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+CONFIG_MACH_OMAP_H4=y
+# CONFIG_MACH_OMAP_H4_TUSB is not set
+# CONFIG_MACH_OMAP_H4_OTG is not set
+# CONFIG_MACH_OMAP2_H4_USB1 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_OMAP_IR=y
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+CONFIG_GPIOEXPANDER_OMAP=y
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_MENELAUS=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
new file mode 100644
index 00000000000..55b2611bd90
--- /dev/null
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -0,0 +1,1253 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:02 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+CONFIG_OMAP_PS2=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
new file mode 100644
index 00000000000..95d9f2be53e
--- /dev/null
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -0,0 +1,839 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:05 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index d4ca5e6e4ff..b68e0144cab 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar  3 03:35:17 2008
+# Linux kernel version: 2.6.24-rc3-omap1
+# Fri Nov 23 12:24:12 2007
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,7 +21,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,22 +39,17 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -69,26 +63,18 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -116,8 +102,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -146,7 +130,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -156,7 +139,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
 
 #
 # TI OMAP Implementations
@@ -164,16 +146,22 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
 # CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
 CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MUX_DEBUG is not set
 CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -182,6 +170,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
 CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
 
 #
 # OMAP Core Type
@@ -193,13 +182,13 @@ CONFIG_ARCH_OMAP16XX=y
 #
 # OMAP Board Type
 #
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
 CONFIG_MACH_OMAP_OSK=y
 # CONFIG_OMAP_OSK_MISTRAL is not set
-CONFIG_MACH_NOKIA770=y
-CONFIG_MACH_OMAP_GENERIC=y
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
 
 #
 # OMAP CPU Speed
@@ -227,6 +216,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -264,12 +254,11 @@ CONFIG_OMAP_CF=y
 #
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -295,7 +284,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
 
 #
 # CPU Frequency scaling
@@ -320,6 +308,7 @@ CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -328,10 +317,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -348,7 +336,6 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -404,7 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -517,13 +503,11 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
 CONFIG_BLK_DEV_IDE=m
 
@@ -545,6 +529,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -578,7 +563,6 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -600,6 +584,7 @@ CONFIG_PPP_MULTILINK=y
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -696,7 +681,6 @@ CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
@@ -724,13 +708,17 @@ CONFIG_I2C_OMAP=y
 #
 # Miscellaneous I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -755,7 +743,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -783,7 +770,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -791,7 +777,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -807,7 +792,6 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 
 #
 # Multimedia devices
@@ -822,11 +806,11 @@ CONFIG_DAB=y
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -844,7 +828,11 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -891,8 +879,16 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# USB Gadget Support
+#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
@@ -900,6 +896,11 @@ CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
 #
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -913,10 +914,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -970,10 +973,8 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1043,6 +1044,9 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1055,6 +1059,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_SAMPLES is not set
@@ -1066,51 +1071,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
new file mode 100644
index 00000000000..b94800c0e00
--- /dev/null
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -0,0 +1,928 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:12 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP730=y
+# CONFIG_ARCH_OMAP15XX is not set
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_PERSEUS2=y
+# CONFIG_MACH_OMAP_FSAMPLE is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_195MHZ is not set
+CONFIG_OMAP_ARM_182MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_OMAP is not set
+CONFIG_FB_VIRTUAL=y
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 9578b5d9f9c..4017d83c9d2 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Mon Jun  2 23:54:48 2008
+# Linux kernel version: 2.6.27-rc4
+# Fri Aug 22 12:38:51 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -23,6 +24,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -56,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -83,11 +84,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -97,12 +104,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -128,7 +136,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -142,8 +149,11 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
@@ -195,7 +205,7 @@ CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_TLB_FEROCEON=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -280,10 +290,6 @@ CONFIG_BINFMT_ELF=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +367,7 @@ CONFIG_NET_PKTGEN=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -499,6 +508,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -575,6 +585,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -641,11 +652,14 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -694,7 +708,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -710,6 +723,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -757,7 +771,14 @@ CONFIG_INPUT_EVDEV=y
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -808,44 +829,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -858,6 +900,7 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -877,7 +920,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
+CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
 # CONFIG_SENSORS_LM80 is not set
@@ -921,9 +964,12 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 
 #
 # Multimedia devices
@@ -954,10 +1000,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -988,6 +1030,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1030,6 +1073,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1038,7 +1082,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1051,7 +1094,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1077,7 +1119,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1111,11 +1155,12 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1136,6 +1181,27 @@ CONFIG_RTC_DRV_M41T80=y
 #
 # on-CPU RTC drivers
 #
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
 
 #
@@ -1215,6 +1281,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1225,13 +1292,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1317,6 +1383,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1331,11 +1399,13 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1345,7 +1415,18 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1358,6 +1439,7 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
 
 #
@@ -1403,6 +1485,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1444,6 +1530,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
new file mode 100644
index 00000000000..40fc6a778e0
--- /dev/null
+++ b/arch/arm/configs/palmte_defconfig
@@ -0,0 +1,761 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Sat May 19 11:04:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+CONFIG_MACH_OMAP_PALMTE=y
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_OMAP_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
new file mode 100644
index 00000000000..e54ced41217
--- /dev/null
+++ b/arch/arm/configs/palmtt_defconfig
@@ -0,0 +1,844 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc3-omap1
+# Sun Oct 29 00:36:12 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART2=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+CONFIG_MACH_OMAP_PALMTT=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_OMAP_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_TSC2102 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_OMAP=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+CONFIG_RTC_DRV_OMAP=y
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# Synchronous Serial Interfaces (SSI)
+#
+# CONFIG_OMAP_UWIRE is not set
+# CONFIG_OMAP_TSC2101 is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
new file mode 100644
index 00000000000..6361922e71c
--- /dev/null
+++ b/arch/arm/configs/palmz71_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 05:13:00 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-z71"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+CONFIG_MACH_OMAP_PALMZ71=y
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_TSC2046 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_TSC210X is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index ef903bed061..5cbd8158964 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 8688362bcf7..1174e276487 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
new file mode 100644
index 00000000000..853dcdd9f2e
--- /dev/null
+++ b/arch/arm/configs/sx1_defconfig
@@ -0,0 +1,1118 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 05:16:10 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+CONFIG_MACH_SX1=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_OMAP_AIC23 is not set
+# CONFIG_SND_OMAP_TSC2101 is not set
+CONFIG_SND_SX1=y
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+CONFIG_NLS_ISO8859_5=y
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 3680bd2df26..fcb4aaabd43 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 48d455bc736..b786e0407e8 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 26de37f7468..a9f41c24c9d 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
new file mode 100644
index 00000000000..73237bd130a
--- /dev/null
+++ b/arch/arm/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+unifdef-y += hwcap.h
diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h
new file mode 100644
index 00000000000..93d04acaa31
--- /dev/null
+++ b/arch/arm/include/asm/a.out-core.h
@@ -0,0 +1,49 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+	struct task_struct *tsk = current;
+
+	dump->magic = CMAGIC;
+	dump->start_code = tsk->mm->start_code;
+	dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
+
+	dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
+	dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	dump->u_ssize = 0;
+
+	dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
+	dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
+	dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
+	dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
+	dump->u_debugreg[4] = tsk->thread.debug.nsaved;
+
+	if (dump->start_stack < 0x04000000)
+		dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
+
+	dump->regs = *regs;
+	dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/arch/arm/include/asm/a.out.h b/arch/arm/include/asm/a.out.h
new file mode 100644
index 00000000000..79489fdcc8b
--- /dev/null
+++ b/arch/arm/include/asm/a.out.h
@@ -0,0 +1,34 @@
+#ifndef __ARM_A_OUT_H__
+#define __ARM_A_OUT_H__
+
+#include <linux/personality.h>
+#include <asm/types.h>
+
+struct exec
+{
+  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
+  __u32 a_text;		/* length of text, in bytes */
+  __u32 a_data;		/* length of data, in bytes */
+  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
+  __u32 a_syms;		/* length of symbol table data in file, in bytes */
+  __u32 a_entry;	/* start address */
+  __u32 a_trsize;	/* length of relocation info for text, in bytes */
+  __u32 a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+/*
+ * This is always the same
+ */
+#define N_TXTADDR(a)	(0x00008000)
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#define M_ARM 103
+
+#ifndef LIBRARY_START_TEXT
+#define LIBRARY_START_TEXT	(0x00c00000)
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
new file mode 100644
index 00000000000..6116e4893c0
--- /dev/null
+++ b/arch/arm/include/asm/assembler.h
@@ -0,0 +1,116 @@
+/*
+ *  arch/arm/include/asm/assembler.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains arm architecture specific defines
+ *  for the different processors.
+ *
+ *  Do not include any C declarations in this file - it is included by
+ *  assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#ifndef __ARMEB__
+#define pull            lsr
+#define push            lsl
+#define get_byte_0      lsl #0
+#define get_byte_1	lsr #8
+#define get_byte_2	lsr #16
+#define get_byte_3	lsr #24
+#define put_byte_0      lsl #0
+#define put_byte_1	lsl #8
+#define put_byte_2	lsl #16
+#define put_byte_3	lsl #24
+#else
+#define pull            lsl
+#define push            lsr
+#define get_byte_0	lsr #24
+#define get_byte_1	lsr #16
+#define get_byte_2	lsr #8
+#define get_byte_3      lsl #0
+#define put_byte_0	lsl #24
+#define put_byte_1	lsl #16
+#define put_byte_2	lsl #8
+#define put_byte_3      lsl #0
+#endif
+
+/*
+ * Data preload for architectures that support it
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+#define PLD(code...)	code
+#else
+#define PLD(code...)
+#endif
+
+/*
+ * This can be used to enable code to cacheline align the destination
+ * pointer when bulk writing to memory.  Experiments on StrongARM and
+ * XScale didn't show this a worthwhile thing to do when the cache is not
+ * set to write-allocate (this would need further testing on XScale when WA
+ * is used).
+ *
+ * On Feroceon there is much to gain however, regardless of cache mode.
+ */
+#ifdef CONFIG_CPU_FEROCEON
+#define CALGN(code...) code
+#else
+#define CALGN(code...)
+#endif
+
+/*
+ * Enable and disable interrupts
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+	.macro	disable_irq
+	cpsid	i
+	.endm
+
+	.macro	enable_irq
+	cpsie	i
+	.endm
+#else
+	.macro	disable_irq
+	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
+	.endm
+
+	.macro	enable_irq
+	msr	cpsr_c, #SVC_MODE
+	.endm
+#endif
+
+/*
+ * Save the current IRQ state and disable IRQs.  Note that this macro
+ * assumes FIQs are enabled, and that the processor is in SVC mode.
+ */
+	.macro	save_and_disable_irqs, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq
+	.endm
+
+/*
+ * Restore interrupt state previously stored in a register.  We don't
+ * guarantee that this will preserve the flags.
+ */
+	.macro	restore_irqs, oldcpsr
+	msr	cpsr_c, \oldcpsr
+	.endm
+
+#define USER(x...)				\
+9999:	x;					\
+	.section __ex_table,"a";		\
+	.align	3;				\
+	.long	9999b,9001f;			\
+	.previous
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
new file mode 100644
index 00000000000..325f881ccb5
--- /dev/null
+++ b/arch/arm/include/asm/atomic.h
@@ -0,0 +1,212 @@
+/*
+ *  arch/arm/include/asm/atomic.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *  Copyright (C) 2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ATOMIC_H
+#define __ASM_ARM_ATOMIC_H
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+#define atomic_read(v)	((v)->counter)
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+/*
+ * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
+ * store exclusive to ensure that these are atomic.  We may loop
+ * to ensure that the update happens.  Writing to 'v->counter'
+ * without using the following operations WILL break the atomic
+ * nature of these ops.
+ */
+static inline void atomic_set(atomic_t *v, int i)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__("@ atomic_set\n"
+"1:	ldrex	%0, [%1]\n"
+"	strex	%0, %2, [%1]\n"
+"	teq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_add_return\n"
+"1:	ldrex	%0, [%2]\n"
+"	add	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_sub_return\n"
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
+{
+	unsigned long oldval, res;
+
+	do {
+		__asm__ __volatile__("@ atomic_cmpxchg\n"
+		"ldrex	%1, [%2]\n"
+		"mov	%0, #0\n"
+		"teq	%1, %3\n"
+		"strexeq %0, %4, [%2]\n"
+		    : "=&r" (res), "=&r" (oldval)
+		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
+		    : "cc");
+	} while (res);
+
+	return oldval;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long tmp, tmp2;
+
+	__asm__ __volatile__("@ atomic_clear_mask\n"
+"1:	ldrex	%0, [%2]\n"
+"	bic	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (addr), "Ir" (mask)
+	: "cc");
+}
+
+#else /* ARM_ARCH_6 */
+
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported on pre-ARMv6 CPUs
+#endif
+
+#define atomic_set(v,i)	(((v)->counter) = (i))
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int val;
+
+	raw_local_irq_save(flags);
+	val = v->counter;
+	v->counter = val += i;
+	raw_local_irq_restore(flags);
+
+	return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int val;
+
+	raw_local_irq_save(flags);
+	val = v->counter;
+	v->counter = val -= i;
+	raw_local_irq_restore(flags);
+
+	return val;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	ret = v->counter;
+	if (likely(ret == old))
+		v->counter = new;
+	raw_local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	*addr &= ~mask;
+	raw_local_irq_restore(flags);
+}
+
+#endif /* __LINUX_ARM_ARCH__ */
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+
+	c = atomic_read(v);
+	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
+		c = old;
+	return c != u;
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_add(i, v)	(void) atomic_add_return(i, v)
+#define atomic_inc(v)		(void) atomic_add_return(1, v)
+#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
+#define atomic_dec(v)		(void) atomic_sub_return(1, v)
+
+#define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v)    (atomic_add_return(1, v))
+#define atomic_dec_return(v)    (atomic_sub_return(1, v))
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
+
+/* Atomic operations are already serializing on ARM */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif
+#endif
diff --git a/arch/arm/include/asm/auxvec.h b/arch/arm/include/asm/auxvec.h
new file mode 100644
index 00000000000..c0536f6b29a
--- /dev/null
+++ b/arch/arm/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMARM_AUXVEC_H
+#define __ASMARM_AUXVEC_H
+
+#endif
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
new file mode 100644
index 00000000000..9a1db20e032
--- /dev/null
+++ b/arch/arm/include/asm/bitops.h
@@ -0,0 +1,340 @@
+/*
+ * Copyright 1995, Russell King.
+ * Various bits and pieces copyrights include:
+ *  Linus Torvalds (test_bit).
+ * Big endian support: Copyright 2001, Nicolas Pitre
+ *  reworked by rmk.
+ *
+ * bit 0 is the LSB of an "unsigned long" quantity.
+ *
+ * Please note that the code in this file should never be included
+ * from user space.  Many of these are not implemented in assembler
+ * since they would be too costly.  Also, they require privileged
+ * instructions (which are not available from user mode) to ensure
+ * that they are atomic.
+ */
+
+#ifndef __ASM_ARM_BITOPS_H
+#define __ASM_ARM_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#define smp_mb__before_clear_bit()	mb()
+#define smp_mb__after_clear_bit()	mb()
+
+/*
+ * These functions are the basis of our bit ops.
+ *
+ * First, the atomic bitops. These use native endian.
+ */
+static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p |= mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p &= ~mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p ^= mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline int
+____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res | mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res & ~mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res ^ mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ *  A note about Endian-ness.
+ *  -------------------------
+ *
+ * When the ARM is put into big endian mode via CR15, the processor
+ * merely swaps the order of bytes within words, thus:
+ *
+ *          ------------ physical data bus bits -----------
+ *          D31 ... D24  D23 ... D16  D15 ... D8  D7 ... D0
+ * little     byte 3       byte 2       byte 1      byte 0
+ * big        byte 0       byte 1       byte 2      byte 3
+ *
+ * This means that reading a 32-bit word at address 0 returns the same
+ * value irrespective of the endian mode bit.
+ *
+ * Peripheral devices should be connected with the data bus reversed in
+ * "Big Endian" mode.  ARM Application Note 61 is applicable, and is
+ * available from http://www.arm.com/.
+ *
+ * The following assumes that the data bus connectivity for big endian
+ * mode has been followed.
+ *
+ * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
+ */
+
+/*
+ * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
+ */
+extern void _set_bit_le(int nr, volatile unsigned long * p);
+extern void _clear_bit_le(int nr, volatile unsigned long * p);
+extern void _change_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_le(const void * p, unsigned size);
+extern int _find_next_zero_bit_le(const void * p, int size, int offset);
+extern int _find_first_bit_le(const unsigned long *p, unsigned size);
+extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
+
+/*
+ * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
+ */
+extern void _set_bit_be(int nr, volatile unsigned long * p);
+extern void _clear_bit_be(int nr, volatile unsigned long * p);
+extern void _change_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_be(const void * p, unsigned size);
+extern int _find_next_zero_bit_be(const void * p, int size, int offset);
+extern int _find_first_bit_be(const unsigned long *p, unsigned size);
+extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
+
+#ifndef CONFIG_SMP
+/*
+ * The __* form of bitops are non-atomic and may be reordered.
+ */
+#define	ATOMIC_BITOP_LE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_le(nr,p))
+
+#define	ATOMIC_BITOP_BE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_be(nr,p))
+#else
+#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
+#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
+#endif
+
+#define NONATOMIC_BITOP(name,nr,p)		\
+	(____nonatomic_##name(nr, p))
+
+#ifndef __ARMEB__
+/*
+ * These are the little endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x))
+
+#else
+
+/*
+ * These are the big endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_BE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_BE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_BE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_be(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_be(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x) ^ 0x18)
+
+#endif
+
+#if __LINUX_ARM_ARCH__ < 5
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/ffs.h>
+
+#else
+
+static inline int constant_fls(int x)
+{
+	int r = 32;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u)) {
+		x <<= 1;
+		r -= 1;
+	}
+	return r;
+}
+
+/*
+ * On ARMv5 and above those functions can be implemented around
+ * the clz instruction for much better code efficiency.
+ */
+
+#define __fls(x) \
+	( __builtin_constant_p(x) ? constant_fls(x) : \
+	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
+
+/* Implement fls() in C so that 64-bit args are suitably truncated */
+static inline int fls(int x)
+{
+	return __fls(x);
+}
+
+#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
+#define __ffs(x) (ffs(x) - 1)
+#define ffz(x) __ffs( ~(x) )
+
+#endif
+
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+/*
+ * Ext2 is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define ext2_set_bit(nr,p)			\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_set_bit_atomic(lock,nr,p)          \
+                test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit(nr,p)			\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit_atomic(lock,nr,p)        \
+                test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_test_bit(nr,p)			\
+		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+#define ext2_find_next_zero_bit(p,sz,off)	\
+		_find_next_zero_bit_le(p,sz,off)
+#define ext2_find_next_bit(p, sz, off) \
+		_find_next_bit_le(p, sz, off)
+
+/*
+ * Minix is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define minix_set_bit(nr,p)			\
+		__set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_bit(nr,p)			\
+		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_set_bit(nr,p)		\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_clear_bit(nr,p)		\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ARM_BITOPS_H */
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
new file mode 100644
index 00000000000..7b62351f097
--- /dev/null
+++ b/arch/arm/include/asm/bug.h
@@ -0,0 +1,24 @@
+#ifndef _ASMARM_BUG_H
+#define _ASMARM_BUG_H
+
+
+#ifdef CONFIG_BUG
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void __bug(const char *file, int line) __attribute__((noreturn));
+
+/* give file/line information */
+#define BUG()		__bug(__FILE__, __LINE__)
+
+#else
+
+/* this just causes an oops */
+#define BUG()		(*(int *)0 = 0)
+
+#endif
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h
new file mode 100644
index 00000000000..a97f1ea708d
--- /dev/null
+++ b/arch/arm/include/asm/bugs.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/include/asm/bugs.h
+ *
+ *  Copyright (C) 1995-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_BUGS_H
+#define __ASM_BUGS_H
+
+#ifdef CONFIG_MMU
+extern void check_writebuffer_bugs(void);
+
+#define check_bugs() check_writebuffer_bugs()
+#else
+#define check_bugs() do { } while (0)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
new file mode 100644
index 00000000000..4fbfb22f65a
--- /dev/null
+++ b/arch/arm/include/asm/byteorder.h
@@ -0,0 +1,58 @@
+/*
+ *  arch/arm/include/asm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ * When in big endian mode, byte accesses appear as:
+ *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef __ASM_ARM_BYTEORDER_H
+#define __ASM_ARM_BYTEORDER_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__u32 t;
+
+#ifndef __thumb__
+	if (!__builtin_constant_p(x)) {
+		/*
+		 * The compiler needs a bit of a hint here to always do the
+		 * right thing and not screw it up to different degrees
+		 * depending on the gcc version.
+		 */
+		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
+	} else
+#endif
+		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
+
+	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
+	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
+	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
+
+	return x;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif
+
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
new file mode 100644
index 00000000000..cb7a9e97fd7
--- /dev/null
+++ b/arch/arm/include/asm/cache.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/include/asm/cache.h
+ */
+#ifndef __ASMARM_CACHE_H
+#define __ASMARM_CACHE_H
+
+#define L1_CACHE_SHIFT		5
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
new file mode 100644
index 00000000000..9073d9c6567
--- /dev/null
+++ b/arch/arm/include/asm/cacheflush.h
@@ -0,0 +1,537 @@
+/*
+ *  arch/arm/include/asm/cacheflush.h
+ *
+ *  Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_CACHEFLUSH_H
+#define _ASMARM_CACHEFLUSH_H
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/glue.h>
+#include <asm/shmparam.h>
+
+#define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
+
+/*
+ *	Cache Model
+ *	===========
+ */
+#undef _CACHE
+#undef MULTI_CACHE
+
+#if defined(CONFIG_CPU_CACHE_V3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_ARM926T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm926
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM940T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm940
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM946E)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm946
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4WB)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4wb
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSCALE)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xscale
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSC3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xsc3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_FEROCEON)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_V6)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v6
+//# endif
+#endif
+
+#if defined(CONFIG_CPU_V7)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v7
+//# endif
+#endif
+
+#if !defined(_CACHE) && !defined(MULTI_CACHE)
+#error Unknown cache maintainence model
+#endif
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty PG_arch_1
+
+/*
+ *	MM Cache Management
+ *	===================
+ *
+ *	The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files
+ *	implement these methods.
+ *
+ *	Start addresses are inclusive and end addresses are exclusive;
+ *	start addresses should be rounded down, end addresses up.
+ *
+ *	See Documentation/cachetlb.txt for more information.
+ *	Please note that the implementation of these, and the required
+ *	effects are cache-type (VIVT/VIPT/PIPT) specific.
+ *
+ *	flush_cache_kern_all()
+ *
+ *		Unconditionally clean and invalidate the entire cache.
+ *
+ *	flush_cache_user_mm(mm)
+ *
+ *		Clean and invalidate all user space cache entries
+ *		before a change of page tables.
+ *
+ *	flush_cache_user_range(start, end, flags)
+ *
+ *		Clean and invalidate a range of cache entries in the
+ *		specified address space before a change of page tables.
+ *		- start - user start address (inclusive, page aligned)
+ *		- end   - user end address   (exclusive, page aligned)
+ *		- flags - vma->vm_flags field
+ *
+ *	coherent_kern_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	DMA Cache Coherency
+ *	===================
+ *
+ *	dma_inv_range(start, end)
+ *
+ *		Invalidate (discard) the specified virtual address range.
+ *		May not write back any entries.  If 'start' or 'end'
+ *		are not cache line aligned, those lines must be written
+ *		back.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	dma_clean_range(start, end)
+ *
+ *		Clean (write back) the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	dma_flush_range(start, end)
+ *
+ *		Clean and invalidate the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ */
+
+struct cpu_cache_fns {
+	void (*flush_kern_all)(void);
+	void (*flush_user_all)(void);
+	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
+
+	void (*coherent_kern_range)(unsigned long, unsigned long);
+	void (*coherent_user_range)(unsigned long, unsigned long);
+	void (*flush_kern_dcache_page)(void *);
+
+	void (*dma_inv_range)(const void *, const void *);
+	void (*dma_clean_range)(const void *, const void *);
+	void (*dma_flush_range)(const void *, const void *);
+};
+
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_CACHE
+
+extern struct cpu_cache_fns cpu_cache;
+
+#define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
+#define __cpuc_flush_user_all		cpu_cache.flush_user_all
+#define __cpuc_flush_user_range		cpu_cache.flush_user_range
+#define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
+#define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
+#define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_inv_range			cpu_cache.dma_inv_range
+#define dmac_clean_range		cpu_cache.dma_clean_range
+#define dmac_flush_range		cpu_cache.dma_flush_range
+
+#else
+
+#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
+#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
+#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
+#define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
+
+extern void __cpuc_flush_kern_all(void);
+extern void __cpuc_flush_user_all(void);
+extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
+extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
+extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
+extern void __cpuc_flush_dcache_page(void *);
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_inv_range			__glue(_CACHE,_dma_inv_range)
+#define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
+#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
+
+extern void dmac_inv_range(const void *, const void *);
+extern void dmac_clean_range(const void *, const void *);
+extern void dmac_flush_range(const void *, const void *);
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages.  Since the
+ * direct-mappings of these pages may contain cached data, we need
+ * to do a full cache flush to ensure that writebacks don't corrupt
+ * data placed into these pages via the new mappings.
+ */
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ */
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		memcpy(dst, src, len);				\
+		flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define flush_cache_all()		__cpuc_flush_kern_all()
+#ifndef CONFIG_CPU_CACHE_VIPT
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+		__cpuc_flush_user_all();
+}
+
+static inline void
+flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
+					vma->vm_flags);
+}
+
+static inline void
+flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = user_addr & PAGE_MASK;
+		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
+	}
+}
+
+static inline void
+flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+			 unsigned long uaddr, void *kaddr,
+			 unsigned long len, int write)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = (unsigned long)kaddr;
+		__cpuc_coherent_kern_range(addr, addr + len);
+	}
+}
+#else
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+				unsigned long uaddr, void *kaddr,
+				unsigned long len, int write);
+#endif
+
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
+/*
+ * flush_cache_user_range is used when we want to ensure that the
+ * Harvard caches are synchronised for the user space address range.
+ * This is used for the ARM private sys_cacheflush system call.
+ */
+#define flush_cache_user_range(vma,start,end) \
+	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
+
+/*
+ * Perform necessary cache operations to ensure that data previously
+ * stored within this range of addresses can be executed by the CPU.
+ */
+#define flush_icache_range(s,e)		__cpuc_coherent_kern_range(s,e)
+
+/*
+ * Perform necessary cache operations to ensure that the TLB will
+ * see data written in the specified area.
+ */
+#define clean_dcache_area(start,size)	cpu_dcache_clean_area(start, size)
+
+/*
+ * flush_dcache_page is used when the kernel has written to the page
+ * cache page at virtual address page->virtual.
+ *
+ * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * have userspace mappings, then we _must_ always clean + invalidate
+ * the dcache entries associated with the kernel mapping.
+ *
+ * Otherwise we can defer the operation, and clean the cache when we are
+ * about to change to user space.  This is the same method as used on SPARC64.
+ * See update_mmu_cache for the user space part.
+ */
+extern void flush_dcache_page(struct page *);
+
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
+static inline void __flush_icache_all(void)
+{
+	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
+	    :
+	    : "r" (0));
+}
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+static inline void flush_anon_page(struct vm_area_struct *vma,
+			 struct page *page, unsigned long vmaddr)
+{
+	extern void __flush_anon_page(struct vm_area_struct *vma,
+				struct page *, unsigned long);
+	if (PageAnon(page))
+		__flush_anon_page(vma, page, vmaddr);
+}
+
+#define flush_dcache_mmap_lock(mapping) \
+	spin_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping) \
+	spin_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_user_range(vma,page,addr,len) \
+	flush_dcache_page(page)
+
+/*
+ * We don't appear to need to do anything here.  In fact, if we did, we'd
+ * duplicate cache flushing elsewhere performed by flush_dcache_page().
+ */
+#define flush_icache_page(vma,page)	do { } while (0)
+
+static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
+	unsigned offset, size_t size)
+{
+	const void *start = (void __force *)virt + offset;
+	dmac_inv_range(start, start + size);
+}
+
+#define __cacheid_present(val)			(val != read_cpuid(CPUID_ID))
+#define __cacheid_type_v7(val)			((val & (7 << 29)) == (4 << 29))
+
+#define __cacheid_vivt_prev7(val)		((val & (15 << 25)) != (14 << 25))
+#define __cacheid_vipt_prev7(val)		((val & (15 << 25)) == (14 << 25))
+#define __cacheid_vipt_nonaliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25))
+#define __cacheid_vipt_aliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
+
+#define __cacheid_vivt(val)			(__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val))
+#define __cacheid_vipt(val)			(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val))
+#define __cacheid_vipt_nonaliasing(val)		(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val))
+#define __cacheid_vipt_aliasing(val)		(__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val))
+#define __cacheid_vivt_asid_tagged_instr(val)	(__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
+
+#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
+/*
+ * VIVT caches only
+ */
+#define cache_is_vivt()			1
+#define cache_is_vipt()			0
+#define cache_is_vipt_nonaliasing()	0
+#define cache_is_vipt_aliasing()	0
+#define icache_is_vivt_asid_tagged()	0
+
+#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
+/*
+ * VIPT caches only
+ */
+#define cache_is_vivt()			0
+#define cache_is_vipt()			1
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vipt_aliasing(__val);				\
+	})
+
+#define icache_is_vivt_asid_tagged()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vivt_asid_tagged_instr(__val);		\
+	})
+
+#else
+/*
+ * VIVT or VIPT caches.  Note that this is unreliable since ARM926
+ * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test.
+ * There's no way to tell from the CacheType register what type (!)
+ * the cache is.
+ */
+#define cache_is_vivt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		(!__cacheid_present(__val)) || __cacheid_vivt(__val);	\
+	})
+		
+#define cache_is_vipt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) && __cacheid_vipt(__val);	\
+	})
+
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_aliasing(__val);			\
+	})
+
+#define icache_is_vivt_asid_tagged()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vivt_asid_tagged_instr(__val);		\
+	})
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h
new file mode 100644
index 00000000000..6dcc1643086
--- /dev/null
+++ b/arch/arm/include/asm/checksum.h
@@ -0,0 +1,139 @@
+/*
+ *  arch/arm/include/asm/checksum.h
+ *
+ * IP checksum routines
+ *
+ * Copyright (C) Original authors of ../asm-i386/checksum.h
+ * Copyright (C) 1996-1999 Russell King
+ */
+#ifndef __ASM_ARM_CHECKSUM_H
+#define __ASM_ARM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
+
+/*
+ * 	Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	__asm__(
+	"add	%0, %1, %1, ror #16	@ csum_fold"
+	: "=r" (sum)
+	: "r" (sum)
+	: "cc");
+	return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16
+ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int tmp1;
+	__wsum sum;
+
+	__asm__ __volatile__(
+	"ldr	%0, [%1], #4		@ ip_fast_csum		\n\
+	ldr	%3, [%1], #4					\n\
+	sub	%2, %2, #5					\n\
+	adds	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+1:	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	tst	%2, #15			@ do this carefully	\n\
+	subne	%2, %2, #1		@ without destroying	\n\
+	bne	1b			@ the carry flag	\n\
+	adcs	%0, %0, %3					\n\
+	adc	%0, %0, #0"
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
+	: "1" (iph), "2" (ihl)
+	: "cc", "memory");
+	return csum_fold(sum);
+}
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		   unsigned short proto, __wsum sum)
+{
+	__asm__(
+	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
+	adcs	%0, %0, %3					\n"
+#ifdef __ARMEB__
+	"adcs	%0, %0, %4					\n"
+#else
+	"adcs	%0, %0, %4, lsl #8				\n"
+#endif
+	"adcs	%0, %0, %5					\n\
+	adc	%0, %0, #0"
+	: "=&r"(sum)
+	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
+	: "cc");
+	return sum;
+}	
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16
+ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+extern __wsum
+__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len,
+		__be32 proto, __wsum sum);
+
+static inline __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
+		unsigned short proto, __wsum sum)
+{
+	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
+					   htonl(proto), sum));
+}
+#endif
diff --git a/arch/arm/include/asm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h
new file mode 100644
index 00000000000..e2b5b0b2116
--- /dev/null
+++ b/arch/arm/include/asm/cpu-multi32.h
@@ -0,0 +1,69 @@
+/*
+ *  arch/arm/include/asm/cpu-multi32.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/page.h>
+
+struct mm_struct;
+
+/*
+ * Don't change this structure - ASM code
+ * relies on it.
+ */
+extern struct processor {
+	/* MISC
+	 * get data abort address/flags
+	 */
+	void (*_data_abort)(unsigned long pc);
+	/*
+	 * Retrieve prefetch fault address
+	 */
+	unsigned long (*_prefetch_abort)(unsigned long lr);
+	/*
+	 * Set up any processor specifics
+	 */
+	void (*_proc_init)(void);
+	/*
+	 * Disable any processor specifics
+	 */
+	void (*_proc_fin)(void);
+	/*
+	 * Special stuff for a reset
+	 */
+	void (*reset)(unsigned long addr) __attribute__((noreturn));
+	/*
+	 * Idle the processor
+	 */
+	int (*_do_idle)(void);
+	/*
+	 * Processor architecture specific
+	 */
+	/*
+	 * clean a virtual address range from the
+	 * D-cache without flushing the cache.
+	 */
+	void (*dcache_clean_area)(void *addr, int size);
+
+	/*
+	 * Set the page table
+	 */
+	void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+	/*
+	 * Set a possibly extended PTE.  Non-extended PTEs should
+	 * ignore 'ext'.
+	 */
+	void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+} processor;
+
+#define cpu_proc_init()			processor._proc_init()
+#define cpu_proc_fin()			processor._proc_fin()
+#define cpu_reset(addr)			processor.reset(addr)
+#define cpu_do_idle()			processor._do_idle()
+#define cpu_dcache_clean_area(addr,sz)	processor.dcache_clean_area(addr,sz)
+#define cpu_set_pte_ext(ptep,pte,ext)	processor.set_pte_ext(ptep,pte,ext)
+#define cpu_do_switch_mm(pgd,mm)	processor.switch_mm(pgd,mm)
diff --git a/arch/arm/include/asm/cpu-single.h b/arch/arm/include/asm/cpu-single.h
new file mode 100644
index 00000000000..f073a6d2a40
--- /dev/null
+++ b/arch/arm/include/asm/cpu-single.h
@@ -0,0 +1,44 @@
+/*
+ *  arch/arm/include/asm/cpu-single.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * Single CPU
+ */
+#ifdef __STDC__
+#define __catify_fn(name,x)	name##x
+#else
+#define __catify_fn(name,x)	name/**/x
+#endif
+#define __cpu_fn(name,x)	__catify_fn(name,x)
+
+/*
+ * If we are supporting multiple CPUs, then we must use a table of
+ * function pointers for this lot.  Otherwise, we can optimise the
+ * table away.
+ */
+#define cpu_proc_init			__cpu_fn(CPU_NAME,_proc_init)
+#define cpu_proc_fin			__cpu_fn(CPU_NAME,_proc_fin)
+#define cpu_reset			__cpu_fn(CPU_NAME,_reset)
+#define cpu_do_idle			__cpu_fn(CPU_NAME,_do_idle)
+#define cpu_dcache_clean_area		__cpu_fn(CPU_NAME,_dcache_clean_area)
+#define cpu_do_switch_mm		__cpu_fn(CPU_NAME,_switch_mm)
+#define cpu_set_pte_ext			__cpu_fn(CPU_NAME,_set_pte_ext)
+
+#include <asm/page.h>
+
+struct mm_struct;
+
+/* declare all the functions as extern */
+extern void cpu_proc_init(void);
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h
new file mode 100644
index 00000000000..634b2d7c612
--- /dev/null
+++ b/arch/arm/include/asm/cpu.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/include/asm/cpu.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_CPU_H
+#define __ASM_ARM_CPU_H
+
+#include <linux/percpu.h>
+
+struct cpuinfo_arm {
+	struct cpu	cpu;
+#ifdef CONFIG_SMP
+	struct task_struct *idle;
+	unsigned int	loops_per_jiffy;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data);
+
+#endif
diff --git a/arch/arm/include/asm/cputime.h b/arch/arm/include/asm/cputime.h
new file mode 100644
index 00000000000..3a8002a5fec
--- /dev/null
+++ b/arch/arm/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ARM_CPUTIME_H
+#define __ARM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ARM_CPUTIME_H */
diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h
new file mode 100644
index 00000000000..75d21e2a3ff
--- /dev/null
+++ b/arch/arm/include/asm/current.h
@@ -0,0 +1,15 @@
+#ifndef _ASMARM_CURRENT_H
+#define _ASMARM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+static inline struct task_struct *get_current(void) __attribute_const__;
+
+static inline struct task_struct *get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current (get_current())
+
+#endif /* _ASMARM_CURRENT_H */
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
new file mode 100644
index 00000000000..b2deda18154
--- /dev/null
+++ b/arch/arm/include/asm/delay.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 1995-2004 Russell King
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+#ifndef __ASM_ARM_DELAY_H
+#define __ASM_ARM_DELAY_H
+
+#include <asm/param.h>	/* HZ */
+
+extern void __delay(int loops);
+
+/*
+ * This function intentionally does not exist; if you see references to
+ * it, it means that you're calling udelay() with an out of range value.
+ *
+ * With currently imposed limits, this means that we support a max delay
+ * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
+ */
+extern void __bad_udelay(void);
+
+/*
+ * division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+extern void __udelay(unsigned long usecs);
+extern void __const_udelay(unsigned long);
+
+#define MAX_UDELAY_MS 2
+
+#define udelay(n)							\
+	(__builtin_constant_p(n) ?					\
+	  ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :		\
+			__const_udelay((n) * ((2199023U*HZ)>>11))) :	\
+	  __udelay(n))
+
+#endif /* defined(_ARM_DELAY_H) */
+
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
new file mode 100644
index 00000000000..c61642b4060
--- /dev/null
+++ b/arch/arm/include/asm/device.h
@@ -0,0 +1,15 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef ASMARM_DEVICE_H
+#define ASMARM_DEVICE_H
+
+struct dev_archdata {
+#ifdef CONFIG_DMABOUNCE
+	struct dmabounce_device_info *dmabounce;
+#endif
+};
+
+#endif
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
new file mode 100644
index 00000000000..5001390be95
--- /dev/null
+++ b/arch/arm/include/asm/div64.h
@@ -0,0 +1,227 @@
+#ifndef __ASM_ARM_DIV64
+#define __ASM_ARM_DIV64
+
+#include <asm/system.h>
+#include <linux/types.h>
+
+/*
+ * The semantics of do_div() are:
+ *
+ * uint32_t do_div(uint64_t *n, uint32_t base)
+ * {
+ * 	uint32_t remainder = *n % base;
+ * 	*n = *n / base;
+ * 	return remainder;
+ * }
+ *
+ * In other words, a 64-bit dividend with a 32-bit divisor producing
+ * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
+ * we call a special __do_div64 helper with completely non standard
+ * calling convention for arguments and results (beware).
+ */
+
+#ifdef __ARMEB__
+#define __xh "r0"
+#define __xl "r1"
+#else
+#define __xl "r0"
+#define __xh "r1"
+#endif
+
+#define __do_div_asm(n, base)					\
+({								\
+	register unsigned int __base      asm("r4") = base;	\
+	register unsigned long long __n   asm("r0") = n;	\
+	register unsigned long long __res asm("r2");		\
+	register unsigned int __rem       asm(__xh);		\
+	asm(	__asmeq("%0", __xh)				\
+		__asmeq("%1", "r2")				\
+		__asmeq("%2", "r0")				\
+		__asmeq("%3", "r4")				\
+		"bl	__do_div64"				\
+		: "=r" (__rem), "=r" (__res)			\
+		: "r" (__n), "r" (__base)			\
+		: "ip", "lr", "cc");				\
+	n = __res;						\
+	__rem;							\
+})
+
+#if __GNUC__ < 4
+
+/*
+ * gcc versions earlier than 4.0 are simply too problematic for the
+ * optimized implementation below. First there is gcc PR 15089 that
+ * tend to trig on more complex constructs, spurious .global __udivsi3
+ * are inserted even if none of those symbols are referenced in the
+ * generated code, and those gcc versions are not able to do constant
+ * propagation on long long values anyway.
+ */
+#define do_div(n, base) __do_div_asm(n, base)
+
+#elif __GNUC__ >= 4
+
+#include <asm/bug.h>
+
+/*
+ * If the divisor happens to be constant, we determine the appropriate
+ * inverse at compile time to turn the division into a few inline
+ * multiplications instead which is much faster. And yet only if compiling
+ * for ARMv4 or higher (we need umull/umlal) and if the gcc version is
+ * sufficiently recent to perform proper long long constant propagation.
+ * (It is unfortunate that gcc doesn't perform all this internally.)
+ */
+#define do_div(n, base)							\
+({									\
+	unsigned int __r, __b = (base);					\
+	if (!__builtin_constant_p(__b) || __b == 0 ||			\
+	    (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) {	\
+		/* non-constant divisor (or zero): slow path */		\
+		__r = __do_div_asm(n, __b);				\
+	} else if ((__b & (__b - 1)) == 0) {				\
+		/* Trivial: __b is constant and a power of 2 */		\
+		/* gcc does the right thing with this code.  */		\
+		__r = n;						\
+		__r &= (__b - 1);					\
+		n /= __b;						\
+	} else {							\
+		/* Multiply by inverse of __b: n/b = n*(p/b)/p       */	\
+		/* We rely on the fact that most of this code gets   */	\
+		/* optimized away at compile time due to constant    */	\
+		/* propagation and only a couple inline assembly     */	\
+		/* instructions should remain. Better avoid any      */	\
+		/* code construct that might prevent that.           */	\
+		unsigned long long __res, __x, __t, __m, __n = n;	\
+		unsigned int __c, __p, __z = 0;				\
+		/* preserve low part of n for reminder computation */	\
+		__r = __n;						\
+		/* determine number of bits to represent __b */		\
+		__p = 1 << __div64_fls(__b);				\
+		/* compute __m = ((__p << 64) + __b - 1) / __b */	\
+		__m = (~0ULL / __b) * __p;				\
+		__m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b;	\
+		/* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */	\
+		__x = ~0ULL / __b * __b - 1;				\
+		__res = (__m & 0xffffffff) * (__x & 0xffffffff);	\
+		__res >>= 32;						\
+		__res += (__m & 0xffffffff) * (__x >> 32);		\
+		__t = __res;						\
+		__res += (__x & 0xffffffff) * (__m >> 32);		\
+		__t = (__res < __t) ? (1ULL << 32) : 0;			\
+		__res = (__res >> 32) + __t;				\
+		__res += (__m >> 32) * (__x >> 32);			\
+		__res /= __p;						\
+		/* Now sanitize and optimize what we've got. */		\
+		if (~0ULL % (__b / (__b & -__b)) == 0) {		\
+			/* those cases can be simplified with: */	\
+			__n /= (__b & -__b);				\
+			__m = ~0ULL / (__b / (__b & -__b));		\
+			__p = 1;					\
+			__c = 1;					\
+		} else if (__res != __x / __b) {			\
+			/* We can't get away without a correction    */	\
+			/* to compensate for bit truncation errors.  */	\
+			/* To avoid it we'd need an additional bit   */	\
+			/* to represent __m which would overflow it. */	\
+			/* Instead we do m=p/b and n/b=(n*m+m)/p.    */	\
+			__c = 1;					\
+			/* Compute __m = (__p << 64) / __b */		\
+			__m = (~0ULL / __b) * __p;			\
+			__m += ((~0ULL % __b + 1) * __p) / __b;		\
+		} else {						\
+			/* Reduce __m/__p, and try to clear bit 31   */	\
+			/* of __m when possible otherwise that'll    */	\
+			/* need extra overflow handling later.       */	\
+			unsigned int __bits = -(__m & -__m);		\
+			__bits |= __m >> 32;				\
+			__bits = (~__bits) << 1;			\
+			/* If __bits == 0 then setting bit 31 is     */	\
+			/* unavoidable.  Simply apply the maximum    */	\
+			/* possible reduction in that case.          */	\
+			/* Otherwise the MSB of __bits indicates the */	\
+			/* best reduction we should apply.           */	\
+			if (!__bits) {					\
+				__p /= (__m & -__m);			\
+				__m /= (__m & -__m);			\
+			} else {					\
+				__p >>= __div64_fls(__bits);		\
+				__m >>= __div64_fls(__bits);		\
+			}						\
+			/* No correction needed. */			\
+			__c = 0;					\
+		}							\
+		/* Now we have a combination of 2 conditions:        */	\
+		/* 1) whether or not we need a correction (__c), and */	\
+		/* 2) whether or not there might be an overflow in   */	\
+		/*    the cross product (__m & ((1<<63) | (1<<31)))  */	\
+		/* Select the best insn combination to perform the   */	\
+		/* actual __m * __n / (__p << 64) operation.         */	\
+		if (!__c) {						\
+			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
+				"mov	%Q0, #0"			\
+				: "=&r" (__res)				\
+				: "r" (__m), "r" (__n)			\
+				: "cc" );				\
+		} else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {	\
+			__res = __m;					\
+			asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"		\
+				"mov	%Q0, #0"			\
+				: "+r" (__res)				\
+				: "r" (__m), "r" (__n)			\
+				: "cc" );				\
+		} else {						\
+			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
+				"cmn	%Q0, %Q1\n\t"			\
+				"adcs	%R0, %R0, %R1\n\t"		\
+				"adc	%Q0, %3, #0"			\
+				: "=&r" (__res)				\
+				: "r" (__m), "r" (__n), "r" (__z)	\
+				: "cc" );				\
+		}							\
+		if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {		\
+			asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"		\
+				"umlal	%R0, %Q0, %Q1, %R2\n\t"		\
+				"mov	%R0, #0\n\t"			\
+				"umlal	%Q0, %R0, %R1, %R2"		\
+				: "+r" (__res)				\
+				: "r" (__m), "r" (__n)			\
+				: "cc" );				\
+		} else {						\
+			asm (	"umlal	%R0, %Q0, %R2, %Q3\n\t"		\
+				"umlal	%R0, %1, %Q2, %R3\n\t"		\
+				"mov	%R0, #0\n\t"			\
+				"adds	%Q0, %1, %Q0\n\t"		\
+				"adc	%R0, %R0, #0\n\t"		\
+				"umlal	%Q0, %R0, %R2, %R3"		\
+				: "+r" (__res), "+r" (__z)		\
+				: "r" (__m), "r" (__n)			\
+				: "cc" );				\
+		}							\
+		__res /= __p;						\
+		/* The reminder can be computed with 32-bit regs     */	\
+		/* only, and gcc is good at that.                    */	\
+		{							\
+			unsigned int __res0 = __res;			\
+			unsigned int __b0 = __b;			\
+			__r -= __res0 * __b0;				\
+		}							\
+		/* BUG_ON(__r >= __b || __res * __b + __r != n); */	\
+		n = __res;						\
+	}								\
+	__r;								\
+})
+
+/* our own fls implementation to make sure constant propagation is fine */
+#define __div64_fls(bits)						\
+({									\
+	unsigned int __left = (bits), __nr = 0;				\
+	if (__left & 0xffff0000) __nr += 16, __left >>= 16;		\
+	if (__left & 0x0000ff00) __nr +=  8, __left >>=  8;		\
+	if (__left & 0x000000f0) __nr +=  4, __left >>=  4;		\
+	if (__left & 0x0000000c) __nr +=  2, __left >>=  2;		\
+	if (__left & 0x00000002) __nr +=  1;				\
+	__nr;								\
+})
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..7b95d205839
--- /dev/null
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -0,0 +1,512 @@
+#ifndef ASMARM_DMA_MAPPING_H
+#define ASMARM_DMA_MAPPING_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm_types.h>
+#include <linux/scatterlist.h>
+
+#include <asm-generic/dma-coherent.h>
+#include <asm/memory.h>
+
+/*
+ * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions
+ * used internally by the DMA-mapping API to provide DMA addresses. They
+ * must not be used by drivers.
+ */
+#ifndef __arch_page_to_dma
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+	return (void *)__bus_to_virt(addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
+}
+#else
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+	return __arch_page_to_dma(dev, page);
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+	return __arch_dma_to_virt(dev, addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+	return __arch_virt_to_dma(dev, addr);
+}
+#endif
+
+/*
+ * DMA-consistent mapping functions.  These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices.  This is the "generic" version.  The PCI specific version
+ * is in pci.h
+ *
+ * Note: Drivers should NOT use this function directly, as it will break
+ * platforms with CONFIG_DMABOUNCE.
+ * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ */
+extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
+
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ *
+ * FIXME: This should really be a platform specific issue - we should
+ * return false if GFP_DMA allocations may not satisfy the supplied 'mask'.
+ */
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	return dev->dma_mask && *dev->dma_mask != 0;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return 32;
+}
+
+static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
+{
+	return !!arch_is_coherent();
+}
+
+/*
+ * DMA errors are defined by all-bits-set in the DMA address.
+ */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr == ~0;
+}
+
+/*
+ * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
+ * function so drivers using this API are highlighted with build warnings.
+ */
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	return NULL;
+}
+
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+		     dma_addr_t handle)
+{
+}
+
+/**
+ * dma_alloc_coherent - allocate consistent memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, unbuffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_coherent
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_coherent
+ * @cpu_addr: CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_coherent().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		  dma_addr_t handle);
+
+/**
+ * dma_mmap_coherent - map a coherent DMA allocation into user space
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @vma: vm_area_struct describing requested user mapping
+ * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ * @size: size of memory originally requested in dma_alloc_coherent
+ *
+ * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
+ * into user space.  The coherent DMA buffer must not be freed by the
+ * driver until the user space mapping has been released.
+ */
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t handle, size_t size);
+
+
+/**
+ * dma_alloc_writecombine - allocate writecombining memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, buffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+
+#define dma_free_writecombine(dev,size,cpu_addr,handle) \
+	dma_free_coherent(dev,size,cpu_addr,handle)
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+			  void *cpu_addr, dma_addr_t handle, size_t size);
+
+
+/**
+ * dma_map_single - map a single buffer for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @cpu_addr: CPU direct mapped address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_single() or
+ * dma_sync_single_for_cpu().
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint(cpu_addr, size, dir);
+
+	return virt_to_dma(dev, cpu_addr);
+}
+#else
+extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
+#endif
+
+/**
+ * dma_map_page - map a portion of a page for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_page() or
+ * dma_sync_single_for_cpu().
+ */
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+/**
+ * dma_unmap_single - unmap a single buffer previously mapped
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
+		 enum dma_data_direction dir)
+{
+	/* nothing to do */
+}
+#else
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
+#endif
+
+/**
+ * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
+	       enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, handle, size, dir);
+}
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scatter-gather version of the
+ * above dma_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for dma_map_single are
+ * the same here.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt;
+
+		sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset;
+		virt = sg_virt(sg);
+
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+
+	return nents;
+}
+#else
+extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
+#endif
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a set of streaming mode DMA translations.
+ * Again, CPU read rules concerning calls here are the same as for
+ * dma_unmap_single() above.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+	     enum dma_data_direction dir)
+{
+
+	/* nothing to do */
+}
+#else
+extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
+#endif
+
+
+/**
+ * dma_sync_single_range_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @offset: offset of region to start sync
+ * @size: size of region to sync
+ * @dir: DMA transfer direction (same as passed to dma_map_single)
+ *
+ * Make physical memory consistent for a single streaming mode DMA
+ * translation after a transfer.
+ *
+ * If you perform a dma_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first the perform a dma_sync_for_device, and then the
+ * device again owns the buffer.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+}
+#else
+extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
+#endif
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+			enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+			   enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
+}
+
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as dma_sync_single_for_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+		    enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt = sg_virt(sg);
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
+		       enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt = sg_virt(sg);
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+}
+#else
+extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
+#endif
+
+#ifdef CONFIG_DMABOUNCE
+/*
+ * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
+ * and utilize bounce buffers as needed to work around limited DMA windows.
+ *
+ * On the SA-1111, a bug limits DMA to only certain regions of RAM.
+ * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
+ * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
+ *
+ * The following are helper functions used by the dmabounce subystem
+ *
+ */
+
+/**
+ * dmabounce_register_dev
+ *
+ * @dev: valid struct device pointer
+ * @small_buf_size: size of buffers to use with small buffer pool
+ * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
+ *
+ * This function should be called by low-level platform code to register
+ * a device as requireing DMA buffer bouncing. The function will allocate
+ * appropriate DMA pools for the device.
+ *
+ */
+extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
+
+/**
+ * dmabounce_unregister_dev
+ *
+ * @dev: valid struct device pointer
+ *
+ * This function should be called by low-level platform code when device
+ * that was previously registered with dmabounce_register_dev is removed
+ * from the system.
+ *
+ */
+extern void dmabounce_unregister_dev(struct device *);
+
+/**
+ * dma_needs_bounce
+ *
+ * @dev: valid struct device pointer
+ * @dma_handle: dma_handle of unbounced buffer
+ * @size: size of region being mapped
+ *
+ * Platforms that utilize the dmabounce mechanism must implement
+ * this function.
+ *
+ * The dmabounce routines call this function whenever a dma-mapping
+ * is requested to determine whether a given buffer needs to be bounced
+ * or not. The function must return 0 if the buffer is OK for
+ * DMA access and 1 if the buffer needs to be bounced.
+ *
+ */
+extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+#endif /* CONFIG_DMABOUNCE */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
new file mode 100644
index 00000000000..75154b19311
--- /dev/null
+++ b/arch/arm/include/asm/dma.h
@@ -0,0 +1,143 @@
+#ifndef __ASM_ARM_DMA_H
+#define __ASM_ARM_DMA_H
+
+typedef unsigned int dmach_t;
+
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/scatterlist.h>
+#include <mach/dma.h>
+
+/*
+ * This is the maximum virtual address which can be DMA'd from.
+ */
+#ifndef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS	0xffffffff
+#endif
+
+/*
+ * DMA modes
+ */
+typedef unsigned int dmamode_t;
+
+#define DMA_MODE_MASK	3
+
+#define DMA_MODE_READ	 0
+#define DMA_MODE_WRITE	 1
+#define DMA_MODE_CASCADE 2
+#define DMA_AUTOINIT	 4
+
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ */
+#define clear_dma_ff(channel)
+
+/* Set only the page register bits of the transfer address.
+ *
+ * NOTE: This is an architecture specific function, and should
+ *       be hidden from the drivers
+ */
+extern void set_dma_page(dmach_t channel, char pagenr);
+
+/* Request a DMA channel
+ *
+ * Some architectures may need to do allocate an interrupt
+ */
+extern int  request_dma(dmach_t channel, const char * device_id);
+
+/* Free a DMA channel
+ *
+ * Some architectures may need to do free an interrupt
+ */
+extern void free_dma(dmach_t channel);
+
+/* Enable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * enabling an interrupt and setting the DMA registers.
+ */
+extern void enable_dma(dmach_t channel);
+
+/* Disable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * disabling an interrupt or whatever.
+ */
+extern void disable_dma(dmach_t channel);
+
+/* Test whether the specified channel has an active DMA transfer
+ */
+extern int dma_channel_active(dmach_t channel);
+
+/* Set the DMA scatter gather list for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+
+/* Set the DMA address for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void __set_dma_addr(dmach_t channel, void *addr);
+#define set_dma_addr(channel, addr)				\
+	__set_dma_addr(channel, bus_to_virt(addr))
+
+/* Set the DMA byte count for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA count immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_count(dmach_t channel, unsigned long count);
+
+/* Set the transfer direction for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA transfer direction immediately, but defer it to the
+ * enable_dma().
+ */
+extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+
+/* Set the transfer speed for this channel
+ */
+extern void set_dma_speed(dmach_t channel, int cycle_ns);
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+extern int  get_dma_residue(dmach_t channel);
+
+#ifndef NO_DMA
+#define NO_DMA	255
+#endif
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* _ARM_DMA_H */
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
new file mode 100644
index 00000000000..cc7ef408071
--- /dev/null
+++ b/arch/arm/include/asm/domain.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/include/asm/domain.h
+ *
+ *  Copyright (C) 1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROC_DOMAIN_H
+#define __ASM_PROC_DOMAIN_H
+
+/*
+ * Domain numbers
+ *
+ *  DOMAIN_IO     - domain 2 includes all IO only
+ *  DOMAIN_USER   - domain 1 includes all user memory only
+ *  DOMAIN_KERNEL - domain 0 includes all kernel memory only
+ *
+ * The domain numbering depends on whether we support 36 physical
+ * address for I/O or not.  Addresses above the 32 bit boundary can
+ * only be mapped using supersections and supersections can only
+ * be set for domain 0.  We could just default to DOMAIN_IO as zero,
+ * but there may be systems with supersection support and no 36-bit
+ * addressing.  In such cases, we want to map system memory with
+ * supersections to reduce TLB misses and footprint.
+ *
+ * 36-bit addressing and supersections are only available on
+ * CPUs based on ARMv6+ or the Intel XSC3 core.
+ */
+#ifndef CONFIG_IO_36
+#define DOMAIN_KERNEL	0
+#define DOMAIN_TABLE	0
+#define DOMAIN_USER	1
+#define DOMAIN_IO	2
+#else
+#define DOMAIN_KERNEL	2
+#define DOMAIN_TABLE	2
+#define DOMAIN_USER	1
+#define DOMAIN_IO	0
+#endif
+
+/*
+ * Domain types
+ */
+#define DOMAIN_NOACCESS	0
+#define DOMAIN_CLIENT	1
+#define DOMAIN_MANAGER	3
+
+#define domain_val(dom,type)	((type) << (2*(dom)))
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MMU
+#define set_domain(x)					\
+	do {						\
+	__asm__ __volatile__(				\
+	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
+	  : : "r" (x));					\
+	isb();						\
+	} while (0)
+
+#define modify_domain(dom,type)					\
+	do {							\
+	struct thread_info *thread = current_thread_info();	\
+	unsigned int domain = thread->cpu_domain;		\
+	domain &= ~domain_val(dom, DOMAIN_MANAGER);		\
+	thread->cpu_domain = domain | domain_val(dom, type);	\
+	set_domain(thread->cpu_domain);				\
+	} while (0)
+
+#else
+#define set_domain(x)		do { } while (0)
+#define modify_domain(dom,type)	do { } while (0)
+#endif
+
+#endif
+#endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h
new file mode 100644
index 00000000000..29f2610efc7
--- /dev/null
+++ b/arch/arm/include/asm/ecard.h
@@ -0,0 +1,219 @@
+/*
+ * arch/arm/include/asm/ecard.h
+ *
+ * definitions for expansion cards
+ *
+ * This is a new system as from Linux 1.2.3
+ *
+ * Changelog:
+ *  11-12-1996	RMK	Further minor improvements
+ *  12-09-1997	RMK	Added interrupt enable/disable for card level
+ *
+ * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
+ */
+
+#ifndef __ASM_ECARD_H
+#define __ASM_ECARD_H
+
+/*
+ * Currently understood cards (but not necessarily
+ * supported):
+ *                        Manufacturer  Product ID
+ */
+#define MANU_ACORN		0x0000
+#define PROD_ACORN_SCSI			0x0002
+#define PROD_ACORN_ETHER1		0x0003
+#define PROD_ACORN_MFM			0x000b
+
+#define MANU_ANT2		0x0011
+#define PROD_ANT_ETHER3			0x00a4
+
+#define MANU_ATOMWIDE		0x0017
+#define PROD_ATOMWIDE_3PSERIAL		0x0090
+
+#define MANU_IRLAM_INSTRUMENTS	0x001f
+#define MANU_IRLAM_INSTRUMENTS_ETHERN	0x5678
+
+#define MANU_OAK		0x0021
+#define PROD_OAK_SCSI			0x0058
+
+#define MANU_MORLEY		0x002b
+#define PROD_MORLEY_SCSI_UNCACHED	0x0067
+
+#define MANU_CUMANA		0x003a
+#define PROD_CUMANA_SCSI_2		0x003a
+#define PROD_CUMANA_SCSI_1		0x00a0
+
+#define MANU_ICS		0x003c
+#define PROD_ICS_IDE			0x00ae
+
+#define MANU_ICS2		0x003d
+#define PROD_ICS2_IDE			0x00ae
+
+#define MANU_SERPORT		0x003f
+#define PROD_SERPORT_DSPORT		0x00b9
+
+#define MANU_ARXE		0x0041
+#define PROD_ARXE_SCSI			0x00be
+
+#define MANU_I3			0x0046
+#define PROD_I3_ETHERLAN500		0x00d4
+#define PROD_I3_ETHERLAN600		0x00ec
+#define PROD_I3_ETHERLAN600A		0x011e
+
+#define MANU_ANT		0x0053
+#define PROD_ANT_ETHERM			0x00d8
+#define PROD_ANT_ETHERB			0x00e4
+
+#define MANU_ALSYSTEMS		0x005b
+#define PROD_ALSYS_SCSIATAPI		0x0107
+
+#define MANU_MCS		0x0063
+#define PROD_MCS_CONNECT32		0x0125
+
+#define MANU_EESOX		0x0064
+#define PROD_EESOX_SCSI2		0x008c
+
+#define MANU_YELLOWSTONE	0x0096
+#define PROD_YELLOWSTONE_RAPIDE32	0x0120
+
+#ifdef ECARD_C
+#define CONST
+#else
+#define CONST const
+#endif
+
+#define MAX_ECARDS	9
+
+struct ecard_id {			/* Card ID structure		*/
+	unsigned short	manufacturer;
+	unsigned short	product;
+	void		*data;
+};
+
+struct in_ecid {			/* Packed card ID information	*/
+	unsigned short	product;	/* Product code			*/
+	unsigned short	manufacturer;	/* Manufacturer code		*/
+	unsigned char	id:4;		/* Simple ID			*/
+	unsigned char	cd:1;		/* Chunk dir present		*/
+	unsigned char	is:1;		/* Interrupt status pointers	*/
+	unsigned char	w:2;		/* Width			*/
+	unsigned char	country;	/* Country			*/
+	unsigned char	irqmask;	/* IRQ mask			*/
+	unsigned char	fiqmask;	/* FIQ mask			*/
+	unsigned long	irqoff;		/* IRQ offset			*/
+	unsigned long	fiqoff;		/* FIQ offset			*/
+};
+
+typedef struct expansion_card ecard_t;
+typedef unsigned long *loader_t;
+
+typedef struct expansion_card_ops {	/* Card handler routines	*/
+	void (*irqenable)(ecard_t *ec, int irqnr);
+	void (*irqdisable)(ecard_t *ec, int irqnr);
+	int  (*irqpending)(ecard_t *ec);
+	void (*fiqenable)(ecard_t *ec, int fiqnr);
+	void (*fiqdisable)(ecard_t *ec, int fiqnr);
+	int  (*fiqpending)(ecard_t *ec);
+} expansioncard_ops_t;
+
+#define ECARD_NUM_RESOURCES	(6)
+
+#define ECARD_RES_IOCSLOW	(0)
+#define ECARD_RES_IOCMEDIUM	(1)
+#define ECARD_RES_IOCFAST	(2)
+#define ECARD_RES_IOCSYNC	(3)
+#define ECARD_RES_MEMC		(4)
+#define ECARD_RES_EASI		(5)
+
+#define ecard_resource_start(ec,nr)	((ec)->resource[nr].start)
+#define ecard_resource_end(ec,nr)	((ec)->resource[nr].end)
+#define ecard_resource_len(ec,nr)	((ec)->resource[nr].end - \
+					 (ec)->resource[nr].start + 1)
+#define ecard_resource_flags(ec,nr)	((ec)->resource[nr].flags)
+
+/*
+ * This contains all the info needed on an expansion card
+ */
+struct expansion_card {
+	struct expansion_card  *next;
+
+	struct device		dev;
+	struct resource		resource[ECARD_NUM_RESOURCES];
+
+	/* Public data */
+	void __iomem		*irqaddr;	/* address of IRQ register	*/
+	void __iomem		*fiqaddr;	/* address of FIQ register	*/
+	unsigned char		irqmask;	/* IRQ mask			*/
+	unsigned char		fiqmask;	/* FIQ mask			*/
+	unsigned char  		claimed;	/* Card claimed?		*/
+	unsigned char		easi;		/* EASI card			*/
+
+	void			*irq_data;	/* Data for use for IRQ by card	*/
+	void			*fiq_data;	/* Data for use for FIQ by card	*/
+	const expansioncard_ops_t *ops;		/* Enable/Disable Ops for card	*/
+
+	CONST unsigned int	slot_no;	/* Slot number			*/
+	CONST unsigned int	dma;		/* DMA number (for request_dma)	*/
+	CONST unsigned int	irq;		/* IRQ number (for request_irq)	*/
+	CONST unsigned int	fiq;		/* FIQ number (for request_irq)	*/
+	CONST struct in_ecid	cid;		/* Card Identification		*/
+
+	/* Private internal data */
+	const char		*card_desc;	/* Card description		*/
+	CONST unsigned int	podaddr;	/* Base Linux address for card	*/
+	CONST loader_t		loader;		/* loader program */
+	u64			dma_mask;
+};
+
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data);
+
+struct in_chunk_dir {
+	unsigned int start_offset;
+	union {
+		unsigned char string[256];
+		unsigned char data[1];
+	} d;
+};
+
+/*
+ * Read a chunk from an expansion card
+ * cd : where to put read data
+ * ec : expansion card info struct
+ * id : id number to find
+ * num: (n+1)'th id to find.
+ */
+extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
+
+/*
+ * Request and release ecard resources
+ */
+extern int ecard_request_resources(struct expansion_card *ec);
+extern void ecard_release_resources(struct expansion_card *ec);
+
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+			   unsigned long offset, unsigned long maxsize);
+#define ecardm_iounmap(__ec, __addr)	devm_iounmap(&(__ec)->dev, __addr)
+
+extern struct bus_type ecard_bus_type;
+
+#define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
+
+struct ecard_driver {
+	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
+	void			(*remove)(struct expansion_card *);
+	void			(*shutdown)(struct expansion_card *);
+	const struct ecard_id	*id_table;
+	unsigned int		id;
+	struct device_driver	drv;
+};
+
+#define ECARD_DRV(_d)	container_of((_d), struct ecard_driver, drv)
+
+#define ecard_set_drvdata(ec,data)	dev_set_drvdata(&(ec)->dev, (data))
+#define ecard_get_drvdata(ec)		dev_get_drvdata(&(ec)->dev)
+
+int ecard_register_driver(struct ecard_driver *);
+void ecard_remove_driver(struct ecard_driver *);
+
+#endif
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
new file mode 100644
index 00000000000..4ca75162748
--- /dev/null
+++ b/arch/arm/include/asm/elf.h
@@ -0,0 +1,116 @@
+#ifndef __ASMARM_ELF_H
+#define __ASMARM_ELF_H
+
+#include <asm/hwcap.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * ELF register definitions..
+ */
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_freg_t[3];
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fp elf_fpregset_t;
+#endif
+
+#define EM_ARM	40
+#define EF_ARM_APCS26 0x08
+#define EF_ARM_SOFT_FLOAT 0x200
+#define EF_ARM_EABI_MASK 0xFF000000
+
+#define R_ARM_NONE	0
+#define R_ARM_PC24	1
+#define R_ARM_ABS32	2
+#define R_ARM_CALL	28
+#define R_ARM_JUMP24	29
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __ARMEB__
+#define ELF_DATA	ELFDATA2MSB
+#else
+#define ELF_DATA	ELFDATA2LSB
+#endif
+#define ELF_ARCH	EM_ARM
+
+#ifndef __ASSEMBLY__
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For now we just provide a fairly general string that describes the
+ * processor family.  This could be made more specific later if someone
+ * implemented optimisations that require it.  26-bit CPUs give you
+ * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
+ * supported).  32-bit CPUs give you "v3[lb]" for anything based on an
+ * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1
+ * core.
+ */
+#define ELF_PLATFORM_SIZE 8
+#define ELF_PLATFORM	(elf_platform)
+
+extern char elf_platform[];
+#endif
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x))
+
+/*
+ * 32-bit code is always OK.  Some cpus can do 26-bit, some can't.
+ */
+#define ELF_PROC_OK(x)	(ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
+
+#define ELF_THUMB_OK(x) \
+	((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \
+	 ((x)->e_entry & 3) == 0)
+
+#define ELF_26BIT_OK(x) \
+	((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \
+	  ((x)->e_flags & EF_ARM_APCS26) == 0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
+
+/* When the program starts, a1 contains a pointer to a function to be 
+   registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
+   have no such handler.  */
+#define ELF_PLAT_INIT(_r, load_addr)	(_r)->ARM_r0 = 0
+
+/*
+ * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
+ * and CP1, we only enable access to the iWMMXt coprocessor if the
+ * binary is EABI or softfloat (and thus, guaranteed not to use
+ * FPA instructions.)
+ */
+#define SET_PERSONALITY(ex, ibcs2)					\
+	do {								\
+		if ((ex).e_flags & EF_ARM_APCS26) {			\
+			set_personality(PER_LINUX);			\
+		} else {						\
+			set_personality(PER_LINUX_32BIT);		\
+			if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \
+				set_thread_flag(TIF_USING_IWMMXT);	\
+			else						\
+				clear_thread_flag(TIF_USING_IWMMXT);	\
+		}							\
+	} while (0)
+
+#endif
diff --git a/arch/arm/include/asm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/arm/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/arm/include/asm/errno.h b/arch/arm/include/asm/errno.h
new file mode 100644
index 00000000000..6e60f0612bb
--- /dev/null
+++ b/arch/arm/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_ERRNO_H
+#define _ARM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/arch/arm/include/asm/fb.h b/arch/arm/include/asm/fb.h
new file mode 100644
index 00000000000..d92e99cd8c8
--- /dev/null
+++ b/arch/arm/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/arm/include/asm/fcntl.h b/arch/arm/include/asm/fcntl.h
new file mode 100644
index 00000000000..a80b6607b2e
--- /dev/null
+++ b/arch/arm/include/asm/fcntl.h
@@ -0,0 +1,11 @@
+#ifndef _ARM_FCNTL_H
+#define _ARM_FCNTL_H
+
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
new file mode 100644
index 00000000000..2242ce22ec6
--- /dev/null
+++ b/arch/arm/include/asm/fiq.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/include/asm/fiq.h
+ *
+ * Support for FIQ on ARM architectures.
+ * Written by Philip Blundell <philb@gnu.org>, 1998
+ * Re-written by Russell King
+ */
+
+#ifndef __ASM_FIQ_H
+#define __ASM_FIQ_H
+
+#include <asm/ptrace.h>
+
+struct fiq_handler {
+	struct fiq_handler *next;
+	/* Name
+	 */
+	const char *name;
+	/* Called to ask driver to relinquish/
+	 * reacquire FIQ
+	 * return zero to accept, or -<errno>
+	 */
+	int (*fiq_op)(void *, int relinquish);
+	/* data for the relinquish/reacquire functions
+	 */
+	void *dev_id;
+};
+
+extern int claim_fiq(struct fiq_handler *f);
+extern void release_fiq(struct fiq_handler *f);
+extern void set_fiq_handler(void *start, unsigned int length);
+extern void set_fiq_regs(struct pt_regs *regs);
+extern void get_fiq_regs(struct pt_regs *regs);
+extern void enable_fiq(int fiq);
+extern void disable_fiq(int fiq);
+
+#endif
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
new file mode 100644
index 00000000000..1d77e51907f
--- /dev/null
+++ b/arch/arm/include/asm/flat.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/include/asm/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __ARM_FLAT_H__
+#define __ARM_FLAT_H__
+
+/* An odd number of words will be pushed after this alignment, so
+   deliberately misalign the value.  */
+#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		0
+
+#endif /* __ARM_FLAT_H__ */
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
new file mode 100644
index 00000000000..c9f03eccc9d
--- /dev/null
+++ b/arch/arm/include/asm/floppy.h
@@ -0,0 +1,148 @@
+/*
+ *  arch/arm/include/asm/floppy.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+#if 0
+#include <mach/floppy.h>
+#endif
+
+#define fd_outb(val,port)			\
+	do {					\
+		if ((port) == FD_DOR)		\
+			fd_setdor((val));	\
+		else				\
+			outb((val),(port));	\
+	} while(0)
+
+#define fd_inb(port)		inb((port))
+#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+					    IRQF_DISABLED,"floppy",NULL)
+#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
+
+static inline int fd_dma_setup(void *data, unsigned int length,
+			       unsigned int mode, unsigned long addr)
+{
+	set_dma_mode(DMA_FLOPPY, mode);
+	__set_dma_addr(DMA_FLOPPY, data);
+	set_dma_count(DMA_FLOPPY, length);
+	virtual_dma_port = addr;
+	enable_dma(DMA_FLOPPY);
+	return 0;
+}
+#define fd_dma_setup		fd_dma_setup
+
+#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma()		free_dma(DMA_FLOPPY)
+#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK		DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found.  This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0.  If an error occurs,
+ * then there is no floppy drive present.       [to be put back in again]
+ */
+static unsigned char floppy_selects[2][4] =
+{
+	{ 0x10, 0x21, 0x23, 0x33 },
+	{ 0x10, 0x21, 0x23, 0x33 }
+};
+
+#define fd_setdor(dor)								\
+do {										\
+	int new_dor = (dor);							\
+	if (new_dor & 0xf0)							\
+		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
+	else									\
+		new_dor &= 0x0c;						\
+	outb(new_dor, FD_DOR);							\
+} while (0)
+
+/*
+ * Someday, we'll automatically detect which drives are present...
+ */
+static inline void fd_scandrives (void)
+{
+#if 0
+	int floppy, drive_count;
+
+	fd_disable_irq();
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
+	raw_cmd->track = 0;
+	raw_cmd->rate = ?;
+	drive_count = 0;
+	for (floppy = 0; floppy < 4; floppy ++) {
+		current_drive = drive_count;
+		/*
+		 * Turn on floppy motor
+		 */
+		if (start_motor(redo_fd_request))
+			continue;
+		/*
+		 * Set up FDC
+		 */
+		fdc_specify();
+		/*
+		 * Tell FDC to recalibrate
+		 */
+		output_byte(FD_RECALIBRATE);
+		LAST_OUT(UNIT(floppy));
+		/* wait for command to complete */
+		if (!successful) {
+			int i;
+			for (i = drive_count; i < 3; i--)
+				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
+			floppy_selects[fdc][3] = 0;
+			floppy -= 1;
+		} else
+			drive_count++;
+	}
+#else
+	floppy_selects[0][0] = 0x10;
+	floppy_selects[0][1] = 0x21;
+	floppy_selects[0][2] = 0x23;
+	floppy_selects[0][3] = 0x33;
+#endif
+}
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+	floppy_selects[0][1] ^= floppy_selects[0][0];
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+	
+#endif
diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h
new file mode 100644
index 00000000000..ee5e03efc1b
--- /dev/null
+++ b/arch/arm/include/asm/fpstate.h
@@ -0,0 +1,93 @@
+/*
+ *  arch/arm/include/asm/fpstate.h
+ *
+ *  Copyright (C) 1995 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_FPSTATE_H
+#define __ASM_ARM_FPSTATE_H
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * VFP storage area has:
+ *  - FPEXC, FPSCR, FPINST and FPINST2.
+ *  - 16 or 32 double precision data registers
+ *  - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6)
+ * 
+ *  FPEXC will always be non-zero once the VFP has been used in this process.
+ */
+
+struct vfp_hard_struct {
+#ifdef CONFIG_VFPv3
+	__u64 fpregs[32];
+#else
+	__u64 fpregs[16];
+#endif
+#if __LINUX_ARM_ARCH__ < 6
+	__u32 fpmx_state;
+#endif
+	__u32 fpexc;
+	__u32 fpscr;
+	/*
+	 * VFP implementation specific state
+	 */
+	__u32 fpinst;
+	__u32 fpinst2;
+
+#ifdef CONFIG_SMP
+	__u32 cpu;
+#endif
+};
+
+union vfp_state {
+	struct vfp_hard_struct	hard;
+};
+
+extern void vfp_flush_thread(union vfp_state *);
+extern void vfp_release_thread(union vfp_state *);
+
+#define FP_HARD_SIZE 35
+
+struct fp_hard_struct {
+	unsigned int save[FP_HARD_SIZE];		/* as yet undefined */
+};
+
+#define FP_SOFT_SIZE 35
+
+struct fp_soft_struct {
+	unsigned int save[FP_SOFT_SIZE];		/* undefined information */
+};
+
+#define IWMMXT_SIZE	0x98
+
+struct iwmmxt_struct {
+	unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)];
+};
+
+union fp_state {
+	struct fp_hard_struct	hard;
+	struct fp_soft_struct	soft;
+#ifdef CONFIG_IWMMXT
+	struct iwmmxt_struct	iwmmxt;
+#endif
+};
+
+#define FP_SIZE (sizeof(union fp_state) / sizeof(int))
+
+struct crunch_state {
+	unsigned int	mvdx[16][2];
+	unsigned int	mvax[4][3];
+	unsigned int	dspsc[2];
+};
+
+#define CRUNCH_SIZE	sizeof(struct crunch_state)
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
new file mode 100644
index 00000000000..584ef9a8e5a
--- /dev/null
+++ b/arch/arm/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_ARM_FTRACE
+#define _ASM_ARM_FTRACE
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR		((long)(mcount))
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
new file mode 100644
index 00000000000..6a332a9f099
--- /dev/null
+++ b/arch/arm/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
new file mode 100644
index 00000000000..a0e39d5d00c
--- /dev/null
+++ b/arch/arm/include/asm/glue.h
@@ -0,0 +1,149 @@
+/*
+ *  arch/arm/include/asm/glue.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file provides the glue to stick the processor-specific bits
+ *  into the kernel in an efficient manner.  The idea is to use branches
+ *  when we're only targetting one class of TLB, or indirect calls
+ *  when we're targetting multiple classes of TLBs.
+ */
+#ifdef __KERNEL__
+
+
+#ifdef __STDC__
+#define ____glue(name,fn)	name##fn
+#else
+#define ____glue(name,fn)	name/**/fn
+#endif
+#define __glue(name,fn)		____glue(name,fn)
+
+
+
+/*
+ *	Data Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  arm6          - ARM6 style
+ *	  arm7		- ARM7 style
+ *	  v4_early	- ARMv4 without Thumb early abort handler
+ *	  v4t_late	- ARMv4 with Thumb late abort handler
+ *	  v4t_early	- ARMv4 with Thumb early abort handler
+ *	  v5tej_early	- ARMv5 with Thumb and Java early abort handler
+ *	  xscale	- ARMv5 with Thumb with Xscale extensions
+ *	  v6_early	- ARMv6 generic early abort handler
+ *	  v7_early	- ARMv7 generic early abort handler
+ */
+#undef CPU_DABORT_HANDLER
+#undef MULTI_DABORT
+
+#if defined(CONFIG_CPU_ARM610)
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER cpu_arm6_data_abort
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM710)
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER cpu_arm7_data_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_LV4T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4t_late_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5TJ
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v5tj_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v5t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV6
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v6_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV7
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v7_early_abort
+# endif
+#endif
+
+#ifndef CPU_DABORT_HANDLER
+#error Unknown data abort handler type
+#endif
+
+/*
+ * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
+ * use the address of the aborted instruction
+ */
+#undef CPU_PABORT_HANDLER
+#undef MULTI_PABORT
+
+#ifdef CONFIG_CPU_PABRT_IFAR
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_NOIFAR
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
+# endif
+#endif
+
+#ifndef CPU_PABORT_HANDLER
+#error Unknown prefetch abort handler type
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
new file mode 100644
index 00000000000..166a7a3e284
--- /dev/null
+++ b/arch/arm/include/asm/gpio.h
@@ -0,0 +1,7 @@
+#ifndef _ARCH_ARM_GPIO_H
+#define _ARCH_ARM_GPIO_H
+
+/* not all ARM platforms necessarily support this API ... */
+#include <mach/gpio.h>
+
+#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
new file mode 100644
index 00000000000..182310b9919
--- /dev/null
+++ b/arch/arm/include/asm/hardirq.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int local_timer_irqs;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#if NR_IRQS > 256
+#define HARDIRQ_BITS	9
+#else
+#define HARDIRQ_BITS	8
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have space
+ * for potentially all IRQ sources in the system nesting
+ * on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h
new file mode 100644
index 00000000000..04be3bdf46b
--- /dev/null
+++ b/arch/arm/include/asm/hardware/arm_timer.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
+#define __ASM_ARM_HARDWARE_ARM_TIMER_H
+
+#define TIMER_LOAD	0x00
+#define TIMER_VALUE	0x04
+#define TIMER_CTRL	0x08
+#define TIMER_CTRL_ONESHOT	(1 << 0)
+#define TIMER_CTRL_32BIT	(1 << 1)
+#define TIMER_CTRL_DIV1		(0 << 2)
+#define TIMER_CTRL_DIV16	(1 << 2)
+#define TIMER_CTRL_DIV256	(2 << 2)
+#define TIMER_CTRL_IE		(1 << 5)	/* Interrupt Enable (versatile only) */
+#define TIMER_CTRL_PERIODIC	(1 << 6)
+#define TIMER_CTRL_ENABLE	(1 << 7)
+
+#define TIMER_INTCLR	0x0c
+#define TIMER_RIS	0x10
+#define TIMER_MIS	0x14
+#define TIMER_BGLOAD	0x18
+
+#endif
diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
new file mode 100644
index 00000000000..e521b70713c
--- /dev/null
+++ b/arch/arm/include/asm/hardware/arm_twd.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_HARDWARE_TWD_H
+#define __ASM_HARDWARE_TWD_H
+
+#define TWD_TIMER_LOAD 			0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
+
+#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
new file mode 100644
index 00000000000..64f2252a25c
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/include/asm/hardware/cache-l2x0.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_HARDWARE_L2X0_H
+#define __ASM_ARM_HARDWARE_L2X0_H
+
+#define L2X0_CACHE_ID			0x000
+#define L2X0_CACHE_TYPE			0x004
+#define L2X0_CTRL			0x100
+#define L2X0_AUX_CTRL			0x104
+#define L2X0_EVENT_CNT_CTRL		0x200
+#define L2X0_EVENT_CNT1_CFG		0x204
+#define L2X0_EVENT_CNT0_CFG		0x208
+#define L2X0_EVENT_CNT1_VAL		0x20C
+#define L2X0_EVENT_CNT0_VAL		0x210
+#define L2X0_INTR_MASK			0x214
+#define L2X0_MASKED_INTR_STAT		0x218
+#define L2X0_RAW_INTR_STAT		0x21C
+#define L2X0_INTR_CLEAR			0x220
+#define L2X0_CACHE_SYNC			0x730
+#define L2X0_INV_LINE_PA		0x770
+#define L2X0_INV_WAY			0x77C
+#define L2X0_CLEAN_LINE_PA		0x7B0
+#define L2X0_CLEAN_LINE_IDX		0x7B8
+#define L2X0_CLEAN_WAY			0x7BC
+#define L2X0_CLEAN_INV_LINE_PA		0x7F0
+#define L2X0_CLEAN_INV_LINE_IDX		0x7F8
+#define L2X0_CLEAN_INV_WAY		0x7FC
+#define L2X0_LOCKDOWN_WAY_D		0x900
+#define L2X0_LOCKDOWN_WAY_I		0x904
+#define L2X0_TEST_OPERATION		0xF00
+#define L2X0_LINE_DATA			0xF10
+#define L2X0_LINE_TAG			0xF30
+#define L2X0_DEBUG_CTRL			0xF40
+
+#ifndef __ASSEMBLY__
+extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h
new file mode 100644
index 00000000000..44477225aed
--- /dev/null
+++ b/arch/arm/include/asm/hardware/clps7111.h
@@ -0,0 +1,184 @@
+/*
+ *  arch/arm/include/asm/hardware/clps7111.h
+ *
+ *  This file contains the hardware definitions of the CLPS7111 internal
+ *  registers.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_CLPS7111_H
+#define __ASM_HARDWARE_CLPS7111_H
+
+#define CLPS7111_PHYS_BASE	(0x80000000)
+
+#ifndef __ASSEMBLY__
+#define clps_readb(off)		__raw_readb(CLPS7111_BASE + (off))
+#define clps_readw(off)		__raw_readw(CLPS7111_BASE + (off))
+#define clps_readl(off)		__raw_readl(CLPS7111_BASE + (off))
+#define clps_writeb(val,off)	__raw_writeb(val, CLPS7111_BASE + (off))
+#define clps_writew(val,off)	__raw_writew(val, CLPS7111_BASE + (off))
+#define clps_writel(val,off)	__raw_writel(val, CLPS7111_BASE + (off))
+#endif
+
+#define PADR		(0x0000)
+#define PBDR		(0x0001)
+#define PDDR		(0x0003)
+#define PADDR		(0x0040)
+#define PBDDR		(0x0041)
+#define PDDDR		(0x0043)
+#define PEDR		(0x0080)
+#define PEDDR		(0x00c0)
+#define SYSCON1		(0x0100)
+#define SYSFLG1		(0x0140)
+#define MEMCFG1		(0x0180)
+#define MEMCFG2		(0x01c0)
+#define DRFPR		(0x0200)
+#define INTSR1		(0x0240)
+#define INTMR1		(0x0280)
+#define LCDCON		(0x02c0)
+#define TC1D            (0x0300)
+#define TC2D		(0x0340)
+#define RTCDR		(0x0380)
+#define RTCMR		(0x03c0)
+#define PMPCON		(0x0400)
+#define CODR		(0x0440)
+#define UARTDR1		(0x0480)
+#define UBRLCR1		(0x04c0)
+#define SYNCIO		(0x0500)
+#define PALLSW		(0x0540)
+#define PALMSW		(0x0580)
+#define STFCLR		(0x05c0)
+#define BLEOI		(0x0600)
+#define MCEOI		(0x0640)
+#define TEOI		(0x0680)
+#define TC1EOI		(0x06c0)
+#define TC2EOI		(0x0700)
+#define RTCEOI		(0x0740)
+#define UMSEOI		(0x0780)
+#define COEOI		(0x07c0)
+#define HALT		(0x0800)
+#define STDBY		(0x0840)
+
+#define FBADDR		(0x1000)
+#define SYSCON2		(0x1100)
+#define SYSFLG2		(0x1140)
+#define INTSR2		(0x1240)
+#define INTMR2		(0x1280)
+#define UARTDR2		(0x1480)
+#define UBRLCR2		(0x14c0)
+#define SS2DR		(0x1500)
+#define SRXEOF		(0x1600)
+#define SS2POP		(0x16c0)
+#define KBDEOI		(0x1700)
+
+/* common bits: SYSCON1 / SYSCON2 */
+#define SYSCON_UARTEN		(1 << 8)
+
+#define SYSCON1_KBDSCAN(x)	((x) & 15)
+#define SYSCON1_KBDSCANMASK	(15)
+#define SYSCON1_TC1M		(1 << 4)
+#define SYSCON1_TC1S		(1 << 5)
+#define SYSCON1_TC2M		(1 << 6)
+#define SYSCON1_TC2S		(1 << 7)
+#define SYSCON1_UART1EN		SYSCON_UARTEN
+#define SYSCON1_BZTOG		(1 << 9)
+#define SYSCON1_BZMOD		(1 << 10)
+#define SYSCON1_DBGEN		(1 << 11)
+#define SYSCON1_LCDEN		(1 << 12)
+#define SYSCON1_CDENTX		(1 << 13)
+#define SYSCON1_CDENRX		(1 << 14)
+#define SYSCON1_SIREN		(1 << 15)
+#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
+#define SYSCON1_ADCKSEL_MASK	(3 << 16)
+#define SYSCON1_EXCKEN		(1 << 18)
+#define SYSCON1_WAKEDIS		(1 << 19)
+#define SYSCON1_IRTXM		(1 << 20)
+
+/* common bits: SYSFLG1 / SYSFLG2 */
+#define SYSFLG_UBUSY		(1 << 11)
+#define SYSFLG_URXFE		(1 << 22)
+#define SYSFLG_UTXFF		(1 << 23)
+
+#define SYSFLG1_MCDR		(1 << 0)
+#define SYSFLG1_DCDET		(1 << 1)
+#define SYSFLG1_WUDR		(1 << 2)
+#define SYSFLG1_WUON		(1 << 3)
+#define SYSFLG1_CTS		(1 << 8)
+#define SYSFLG1_DSR		(1 << 9)
+#define SYSFLG1_DCD		(1 << 10)
+#define SYSFLG1_UBUSY		SYSFLG_UBUSY
+#define SYSFLG1_NBFLG		(1 << 12)
+#define SYSFLG1_RSTFLG		(1 << 13)
+#define SYSFLG1_PFFLG		(1 << 14)
+#define SYSFLG1_CLDFLG		(1 << 15)
+#define SYSFLG1_URXFE		SYSFLG_URXFE
+#define SYSFLG1_UTXFF		SYSFLG_UTXFF
+#define SYSFLG1_CRXFE		(1 << 24)
+#define SYSFLG1_CTXFF		(1 << 25)
+#define SYSFLG1_SSIBUSY		(1 << 26)
+#define SYSFLG1_ID		(1 << 29)
+
+#define SYSFLG2_SSRXOF		(1 << 0)
+#define SYSFLG2_RESVAL		(1 << 1)
+#define SYSFLG2_RESFRM		(1 << 2)
+#define SYSFLG2_SS2RXFE		(1 << 3)
+#define SYSFLG2_SS2TXFF		(1 << 4)
+#define SYSFLG2_SS2TXUF		(1 << 5)
+#define SYSFLG2_CKMODE		(1 << 6)
+#define SYSFLG2_UBUSY		SYSFLG_UBUSY
+#define SYSFLG2_URXFE		SYSFLG_URXFE
+#define SYSFLG2_UTXFF		SYSFLG_UTXFF
+
+#define LCDCON_GSEN		(1 << 30)
+#define LCDCON_GSMD		(1 << 31)
+
+#define SYSCON2_SERSEL		(1 << 0)
+#define SYSCON2_KBD6		(1 << 1)
+#define SYSCON2_DRAMZ		(1 << 2)
+#define SYSCON2_KBWEN		(1 << 3)
+#define SYSCON2_SS2TXEN		(1 << 4)
+#define SYSCON2_PCCARD1		(1 << 5)
+#define SYSCON2_PCCARD2		(1 << 6)
+#define SYSCON2_SS2RXEN		(1 << 7)
+#define SYSCON2_UART2EN		SYSCON_UARTEN
+#define SYSCON2_SS2MAEN		(1 << 9)
+#define SYSCON2_OSTB		(1 << 12)
+#define SYSCON2_CLKENSL		(1 << 13)
+#define SYSCON2_BUZFREQ		(1 << 14)
+
+/* common bits: UARTDR1 / UARTDR2 */
+#define UARTDR_FRMERR		(1 << 8)
+#define UARTDR_PARERR		(1 << 9)
+#define UARTDR_OVERR		(1 << 10)
+
+/* common bits: UBRLCR1 / UBRLCR2 */
+#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
+#define UBRLCR_BREAK		(1 << 12)
+#define UBRLCR_PRTEN		(1 << 13)
+#define UBRLCR_EVENPRT		(1 << 14)
+#define UBRLCR_XSTOP		(1 << 15)
+#define UBRLCR_FIFOEN		(1 << 16)
+#define UBRLCR_WRDLEN5		(0 << 17)
+#define UBRLCR_WRDLEN6		(1 << 17)
+#define UBRLCR_WRDLEN7		(2 << 17)
+#define UBRLCR_WRDLEN8		(3 << 17)
+#define UBRLCR_WRDLEN_MASK	(3 << 17)
+
+#define SYNCIO_SMCKEN		(1 << 13)
+#define SYNCIO_TXFRMEN		(1 << 14)
+
+#endif /* __ASM_HARDWARE_CLPS7111_H */
diff --git a/arch/arm/include/asm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h
new file mode 100644
index 00000000000..f75626933e9
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cs89712.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/include/asm/hardware/cs89712.h
+ *
+ *  This file contains the hardware definitions of the CS89712
+ *  additional internal registers.
+ *
+ *  Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de>
+ *			
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_CS89712_H
+#define __ASM_HARDWARE_CS89712_H
+
+/*
+*	CS89712 additional registers
+*/
+                                  
+#define PCDR			0x0002	/* Port C Data register ---------------------------- */
+#define PCDDR			0x0042	/* Port C Data Direction register ------------------ */
+#define SDCONF			0x2300  /* SDRAM Configuration register ---------------------*/
+#define SDRFPR			0x2340  /* SDRAM Refresh period register --------------------*/
+
+#define SDCONF_ACTIVE		(1 << 10)
+#define SDCONF_CLKCTL		(1 << 9)
+#define SDCONF_WIDTH_4		(0 << 7)
+#define SDCONF_WIDTH_8		(1 << 7)
+#define SDCONF_WIDTH_16		(2 << 7)
+#define SDCONF_WIDTH_32		(3 << 7)
+#define SDCONF_SIZE_16		(0 << 5)
+#define SDCONF_SIZE_64		(1 << 5)
+#define SDCONF_SIZE_128		(2 << 5)
+#define SDCONF_SIZE_256		(3 << 5)
+#define SDCONF_CASLAT_2		(2)
+#define SDCONF_CASLAT_3		(3)
+
+#endif /* __ASM_HARDWARE_CS89712_H */
diff --git a/arch/arm/include/asm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S
new file mode 100644
index 00000000000..22c689255e6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/debug-8250.S
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/include/asm/hardware/debug-8250.S
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/serial_reg.h>
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001:		ldrb	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+#endif
+		.endm
diff --git a/arch/arm/include/asm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S
new file mode 100644
index 00000000000..f9fd083eff6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/debug-pl01x.S
@@ -0,0 +1,29 @@
+/* arch/arm/include/asm/hardware/debug-pl01x.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <linux/amba/serial.h>
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART01x_DR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]
+		tst	\rd, #UART01x_FR_TXFF
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]
+		tst	\rd, #UART01x_FR_BUSY
+		bne	1001b
+		.endm
diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
new file mode 100644
index 00000000000..0d7552751aa
--- /dev/null
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -0,0 +1,147 @@
+/*
+ *  arch/arm/include/asm/hardware/dec21285.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  DC21285 registers
+ */
+#define DC21285_PCI_IACK		0x79000000
+#define DC21285_ARMCSR_BASE		0x42000000
+#define DC21285_PCI_TYPE_0_CONFIG	0x7b000000
+#define DC21285_PCI_TYPE_1_CONFIG	0x7a000000
+#define DC21285_OUTBOUND_WRITE_FLUSH	0x78000000
+#define DC21285_FLASH			0x41000000
+#define DC21285_PCI_IO			0x7c000000
+#define DC21285_PCI_MEM			0x80000000
+
+#ifndef __ASSEMBLY__
+#include <mach/hardware.h>
+#define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
+#else
+#define DC21285_IO(x)		(x)
+#endif
+
+#define CSR_PCICMD		DC21285_IO(0x0004)
+#define CSR_CLASSREV		DC21285_IO(0x0008)
+#define CSR_PCICACHELINESIZE	DC21285_IO(0x000c)
+#define CSR_PCICSRBASE		DC21285_IO(0x0010)
+#define CSR_PCICSRIOBASE	DC21285_IO(0x0014)
+#define CSR_PCISDRAMBASE	DC21285_IO(0x0018)
+#define CSR_PCIROMBASE		DC21285_IO(0x0030)
+#define CSR_MBOX0		DC21285_IO(0x0050)
+#define CSR_MBOX1		DC21285_IO(0x0054)
+#define CSR_MBOX2		DC21285_IO(0x0058)
+#define CSR_MBOX3		DC21285_IO(0x005c)
+#define CSR_DOORBELL		DC21285_IO(0x0060)
+#define CSR_DOORBELL_SETUP	DC21285_IO(0x0064)
+#define CSR_ROMWRITEREG		DC21285_IO(0x0068)
+#define CSR_CSRBASEMASK		DC21285_IO(0x00f8)
+#define CSR_CSRBASEOFFSET	DC21285_IO(0x00fc)
+#define CSR_SDRAMBASEMASK	DC21285_IO(0x0100)
+#define CSR_SDRAMBASEOFFSET	DC21285_IO(0x0104)
+#define CSR_ROMBASEMASK		DC21285_IO(0x0108)
+#define CSR_SDRAMTIMING		DC21285_IO(0x010c)
+#define CSR_SDRAMADDRSIZE0	DC21285_IO(0x0110)
+#define CSR_SDRAMADDRSIZE1	DC21285_IO(0x0114)
+#define CSR_SDRAMADDRSIZE2	DC21285_IO(0x0118)
+#define CSR_SDRAMADDRSIZE3	DC21285_IO(0x011c)
+#define CSR_I2O_INFREEHEAD	DC21285_IO(0x0120)
+#define CSR_I2O_INPOSTTAIL	DC21285_IO(0x0124)
+#define CSR_I2O_OUTPOSTHEAD	DC21285_IO(0x0128)
+#define CSR_I2O_OUTFREETAIL	DC21285_IO(0x012c)
+#define CSR_I2O_INFREECOUNT	DC21285_IO(0x0130)
+#define CSR_I2O_OUTPOSTCOUNT	DC21285_IO(0x0134)
+#define CSR_I2O_INPOSTCOUNT	DC21285_IO(0x0138)
+#define CSR_SA110_CNTL		DC21285_IO(0x013c)
+#define SA110_CNTL_INITCMPLETE		(1 << 0)
+#define SA110_CNTL_ASSERTSERR		(1 << 1)
+#define SA110_CNTL_RXSERR		(1 << 3)
+#define SA110_CNTL_SA110DRAMPARITY	(1 << 4)
+#define SA110_CNTL_PCISDRAMPARITY	(1 << 5)
+#define SA110_CNTL_DMASDRAMPARITY	(1 << 6)
+#define SA110_CNTL_DISCARDTIMER		(1 << 8)
+#define SA110_CNTL_PCINRESET		(1 << 9)
+#define SA110_CNTL_I2O_256		(0 << 10)
+#define SA110_CNTL_I20_512		(1 << 10)
+#define SA110_CNTL_I2O_1024		(2 << 10)
+#define SA110_CNTL_I2O_2048		(3 << 10)
+#define SA110_CNTL_I2O_4096		(4 << 10)
+#define SA110_CNTL_I2O_8192		(5 << 10)
+#define SA110_CNTL_I2O_16384		(6 << 10)
+#define SA110_CNTL_I2O_32768		(7 << 10)
+#define SA110_CNTL_WATCHDOG		(1 << 13)
+#define SA110_CNTL_ROMWIDTH_UNDEF	(0 << 14)
+#define SA110_CNTL_ROMWIDTH_16		(1 << 14)
+#define SA110_CNTL_ROMWIDTH_32		(2 << 14)
+#define SA110_CNTL_ROMWIDTH_8		(3 << 14)
+#define SA110_CNTL_ROMACCESSTIME(x)	((x)<<16)
+#define SA110_CNTL_ROMBURSTTIME(x)	((x)<<20)
+#define SA110_CNTL_ROMTRISTATETIME(x)	((x)<<24)
+#define SA110_CNTL_XCSDIR(x)		((x)<<28)
+#define SA110_CNTL_PCICFN		(1 << 31)
+
+/*
+ * footbridge_cfn_mode() is used when we want
+ * to check whether we are the central function
+ */
+#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN)
+#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN)
+#define footbridge_cfn_mode() __footbridge_cfn_mode()
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+#define footbridge_cfn_mode() (1)
+#else
+#define footbridge_cfn_mode() (0)
+#endif
+
+#define CSR_PCIADDR_EXTN	DC21285_IO(0x0140)
+#define CSR_PREFETCHMEMRANGE	DC21285_IO(0x0144)
+#define CSR_XBUS_CYCLE		DC21285_IO(0x0148)
+#define CSR_XBUS_IOSTROBE	DC21285_IO(0x014c)
+#define CSR_DOORBELL_PCI	DC21285_IO(0x0150)
+#define CSR_DOORBELL_SA110	DC21285_IO(0x0154)
+#define CSR_UARTDR		DC21285_IO(0x0160)
+#define CSR_RXSTAT		DC21285_IO(0x0164)
+#define CSR_H_UBRLCR		DC21285_IO(0x0168)
+#define CSR_M_UBRLCR		DC21285_IO(0x016c)
+#define CSR_L_UBRLCR		DC21285_IO(0x0170)
+#define CSR_UARTCON		DC21285_IO(0x0174)
+#define CSR_UARTFLG		DC21285_IO(0x0178)
+#define CSR_IRQ_STATUS		DC21285_IO(0x0180)
+#define CSR_IRQ_RAWSTATUS	DC21285_IO(0x0184)
+#define CSR_IRQ_ENABLE		DC21285_IO(0x0188)
+#define CSR_IRQ_DISABLE		DC21285_IO(0x018c)
+#define CSR_IRQ_SOFT		DC21285_IO(0x0190)
+#define CSR_FIQ_STATUS		DC21285_IO(0x0280)
+#define CSR_FIQ_RAWSTATUS	DC21285_IO(0x0284)
+#define CSR_FIQ_ENABLE		DC21285_IO(0x0288)
+#define CSR_FIQ_DISABLE		DC21285_IO(0x028c)
+#define CSR_FIQ_SOFT		DC21285_IO(0x0290)
+#define CSR_TIMER1_LOAD		DC21285_IO(0x0300)
+#define CSR_TIMER1_VALUE	DC21285_IO(0x0304)
+#define CSR_TIMER1_CNTL		DC21285_IO(0x0308)
+#define CSR_TIMER1_CLR		DC21285_IO(0x030c)
+#define CSR_TIMER2_LOAD		DC21285_IO(0x0320)
+#define CSR_TIMER2_VALUE	DC21285_IO(0x0324)
+#define CSR_TIMER2_CNTL		DC21285_IO(0x0328)
+#define CSR_TIMER2_CLR		DC21285_IO(0x032c)
+#define CSR_TIMER3_LOAD		DC21285_IO(0x0340)
+#define CSR_TIMER3_VALUE	DC21285_IO(0x0344)
+#define CSR_TIMER3_CNTL		DC21285_IO(0x0348)
+#define CSR_TIMER3_CLR		DC21285_IO(0x034c)
+#define CSR_TIMER4_LOAD		DC21285_IO(0x0360)
+#define CSR_TIMER4_VALUE	DC21285_IO(0x0364)
+#define CSR_TIMER4_CNTL		DC21285_IO(0x0368)
+#define CSR_TIMER4_CLR		DC21285_IO(0x036c)
+
+#define TIMER_CNTL_ENABLE	(1 << 7)
+#define TIMER_CNTL_AUTORELOAD	(1 << 6)
+#define TIMER_CNTL_DIV1		(0)
+#define TIMER_CNTL_DIV16	(1 << 2)
+#define TIMER_CNTL_DIV256	(2 << 2)
+#define TIMER_CNTL_CNTEXT	(3 << 2)
+
+
diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
new file mode 100644
index 00000000000..e0af4983723
--- /dev/null
+++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/include/asm/hardware/entry-macro-iomd.S
+ *
+ * Low-level IRQ helper macros for IOC/IOMD based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/* IOC / IOMD based hardware */
+#include <asm/hardware/iomd.h>
+
+		.macro	disable_fiq
+		mov	r12, #ioc_base_high
+		.if	ioc_base_low
+		orr	r12, r12, #ioc_base_low
+		.endif
+		strb	r12, [r12, #0x38]	@ Disable FIQ register
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
+		ldr	\tmp, =irq_prio_h
+		teq	\irqstat, #0
+#ifdef IOMD_BASE
+		ldreqb	\irqstat, [\base, #IOMD_DMAREQ]	@ get dma
+		addeq	\tmp, \tmp, #256		@ irq_prio_h table size
+		teqeq	\irqstat, #0
+		bne	2406f
+#endif
+		ldreqb	\irqstat, [\base, #IOMD_IRQREQA]	@ get low priority
+		addeq	\tmp, \tmp, #256		@ irq_prio_d table size
+		teqeq	\irqstat, #0
+#ifdef IOMD_IRQREQC
+		ldreqb	\irqstat, [\base, #IOMD_IRQREQC]
+		addeq	\tmp, \tmp, #256		@ irq_prio_l table size
+		teqeq	\irqstat, #0
+#endif
+#ifdef IOMD_IRQREQD
+		ldreqb	\irqstat, [\base, #IOMD_IRQREQD]
+		addeq	\tmp, \tmp, #256		@ irq_prio_lc table size
+		teqeq	\irqstat, #0
+#endif
+2406:		ldrneb	\irqnr, [\tmp, \irqstat]	@ get IRQ number
+		.endm
+
+/*
+ * Interrupt table (incorporates priority).  Please note that we
+ * rely on the order of these tables (see above code).
+ */
+		.align	5
+irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+#ifdef IOMD_BASE
+irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+#endif
+irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+#ifdef IOMD_IRQREQC
+irq_prio_lc:	.byte	24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
+		.byte	28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
+		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+#endif
+#ifdef IOMD_IRQREQD
+irq_prio_ld:	.byte	40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
+		.byte	44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
+		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+#endif
+
diff --git a/arch/arm/include/asm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h
new file mode 100644
index 00000000000..654d5f625c4
--- /dev/null
+++ b/arch/arm/include/asm/hardware/ep7211.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/include/asm/hardware/ep7211.h
+ *
+ *  This file contains the hardware definitions of the EP7211 internal
+ *  registers.
+ *
+ *  Copyright (C) 2001 Blue Mug, Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_EP7211_H
+#define __ASM_HARDWARE_EP7211_H
+
+#include <asm/hardware/clps7111.h>
+
+/*
+ * define EP7211_BASE to be the base address of the region
+ * you want to access.
+ */
+
+#define EP7211_PHYS_BASE	(0x80000000)
+
+/*
+ * XXX miket@bluemug.com: need to introduce EP7211 registers (those not
+ * present in 7212) here.
+ */
+
+#endif /* __ASM_HARDWARE_EP7211_H */
diff --git a/arch/arm/include/asm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h
new file mode 100644
index 00000000000..3b43bbeaf1d
--- /dev/null
+++ b/arch/arm/include/asm/hardware/ep7212.h
@@ -0,0 +1,83 @@
+/*
+ *  arch/arm/include/asm/hardware/ep7212.h
+ *
+ *  This file contains the hardware definitions of the EP7212 internal
+ *  registers.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_EP7212_H
+#define __ASM_HARDWARE_EP7212_H
+
+/*
+ * define EP7212_BASE to be the base address of the region
+ * you want to access.
+ */
+
+#define EP7212_PHYS_BASE	(0x80000000)
+
+#ifndef __ASSEMBLY__
+#define ep_readl(off)		__raw_readl(EP7212_BASE + (off))
+#define ep_writel(val,off)	__raw_writel(val, EP7212_BASE + (off))
+#endif
+
+/*
+ * These registers are specific to the EP7212 only
+ */
+#define DAIR			0x2000
+#define DAIR0			0x2040
+#define DAIDR1			0x2080
+#define DAIDR2			0x20c0
+#define DAISR			0x2100
+#define SYSCON3			0x2200
+#define INTSR3			0x2240
+#define INTMR3			0x2280
+#define LEDFLSH			0x22c0
+
+#define DAIR_DAIEN		(1 << 16)
+#define DAIR_ECS		(1 << 17)
+#define DAIR_LCTM		(1 << 19)
+#define DAIR_LCRM		(1 << 20)
+#define DAIR_RCTM		(1 << 21)
+#define DAIR_RCRM		(1 << 22)
+#define DAIR_LBM		(1 << 23)
+
+#define DAIDR2_FIFOEN		(1 << 15)
+#define DAIDR2_FIFOLEFT		(0x0d << 16)
+#define DAIDR2_FIFORIGHT	(0x11 << 16)
+
+#define DAISR_RCTS		(1 << 0)
+#define DAISR_RCRS		(1 << 1)
+#define DAISR_LCTS		(1 << 2)
+#define DAISR_LCRS		(1 << 3)
+#define DAISR_RCTU		(1 << 4)
+#define DAISR_RCRO		(1 << 5)
+#define DAISR_LCTU		(1 << 6)
+#define DAISR_LCRO		(1 << 7)
+#define DAISR_RCNF		(1 << 8)
+#define DAISR_RCNE		(1 << 9)
+#define DAISR_LCNF		(1 << 10)
+#define DAISR_LCNE		(1 << 11)
+#define DAISR_FIFO		(1 << 12)
+
+#define SYSCON3_ADCCON		(1 << 0)
+#define SYSCON3_DAISEL		(1 << 3)
+#define SYSCON3_ADCCKNSEN	(1 << 4)
+#define SYSCON3_FASTWAKE	(1 << 8)
+#define SYSCON3_DAIEN		(1 << 9)
+
+#endif /* __ASM_HARDWARE_EP7212_H */
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
new file mode 100644
index 00000000000..4924914af18
--- /dev/null
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -0,0 +1,42 @@
+/*
+ *  arch/arm/include/asm/hardware/gic.h
+ *
+ *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_HARDWARE_GIC_H
+#define __ASM_ARM_HARDWARE_GIC_H
+
+#include <linux/compiler.h>
+
+#define GIC_CPU_CTRL			0x00
+#define GIC_CPU_PRIMASK			0x04
+#define GIC_CPU_BINPOINT		0x08
+#define GIC_CPU_INTACK			0x0c
+#define GIC_CPU_EOI			0x10
+#define GIC_CPU_RUNNINGPRI		0x14
+#define GIC_CPU_HIGHPRI			0x18
+
+#define GIC_DIST_CTRL			0x000
+#define GIC_DIST_CTR			0x004
+#define GIC_DIST_ENABLE_SET		0x100
+#define GIC_DIST_ENABLE_CLEAR		0x180
+#define GIC_DIST_PENDING_SET		0x200
+#define GIC_DIST_PENDING_CLEAR		0x280
+#define GIC_DIST_ACTIVE_BIT		0x300
+#define GIC_DIST_PRI			0x400
+#define GIC_DIST_TARGET			0x800
+#define GIC_DIST_CONFIG			0xc00
+#define GIC_DIST_SOFTINT		0xf00
+
+#ifndef __ASSEMBLY__
+void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
+void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
+void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
+void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h
new file mode 100644
index 00000000000..554f128a104
--- /dev/null
+++ b/arch/arm/include/asm/hardware/icst307.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/include/asm/hardware/icst307.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICS307
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ *
+ *  This file is similar to the icst525.h file
+ */
+#ifndef ASMARM_HARDWARE_ICST307_H
+#define ASMARM_HARDWARE_ICST307_H
+
+struct icst307_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+};
+
+struct icst307_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
+struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
+struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h
new file mode 100644
index 00000000000..58f0dc43e2e
--- /dev/null
+++ b/arch/arm/include/asm/hardware/icst525.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/include/asm/hardware/icst525.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST525
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ */
+#ifndef ASMARM_HARDWARE_ICST525_H
+#define ASMARM_HARDWARE_ICST525_H
+
+struct icst525_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+};
+
+struct icst525_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
+struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
+struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h
new file mode 100644
index 00000000000..1f6b8013bec
--- /dev/null
+++ b/arch/arm/include/asm/hardware/ioc.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/include/asm/hardware/ioc.h
+ *
+ *  Copyright (C) Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Use these macros to read/write the IOC.  All it does is perform the actual
+ *  read/write.
+ */
+#ifndef __ASMARM_HARDWARE_IOC_H
+#define __ASMARM_HARDWARE_IOC_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use __raw_base variants here so that we give the compiler the
+ * chance to keep IOC_BASE in a register.
+ */
+#define ioc_readb(off)		__raw_readb(IOC_BASE + (off))
+#define ioc_writeb(val,off)	__raw_writeb(val, IOC_BASE + (off))
+
+#endif
+
+#define IOC_CONTROL	(0x00)
+#define IOC_KARTTX	(0x04)
+#define IOC_KARTRX	(0x04)
+
+#define IOC_IRQSTATA	(0x10)
+#define IOC_IRQREQA	(0x14)
+#define IOC_IRQCLRA	(0x14)
+#define IOC_IRQMASKA	(0x18)
+
+#define IOC_IRQSTATB	(0x20)
+#define IOC_IRQREQB	(0x24)
+#define IOC_IRQMASKB	(0x28)
+
+#define IOC_FIQSTAT	(0x30)
+#define IOC_FIQREQ	(0x34)
+#define IOC_FIQMASK	(0x38)
+
+#define IOC_T0CNTL	(0x40)
+#define IOC_T0LTCHL	(0x40)
+#define IOC_T0CNTH	(0x44)
+#define IOC_T0LTCHH	(0x44)
+#define IOC_T0GO	(0x48)
+#define IOC_T0LATCH	(0x4c)
+
+#define IOC_T1CNTL	(0x50)
+#define IOC_T1LTCHL	(0x50)
+#define IOC_T1CNTH	(0x54)
+#define IOC_T1LTCHH	(0x54)
+#define IOC_T1GO	(0x58)
+#define IOC_T1LATCH	(0x5c)
+
+#define IOC_T2CNTL	(0x60)
+#define IOC_T2LTCHL	(0x60)
+#define IOC_T2CNTH	(0x64)
+#define IOC_T2LTCHH	(0x64)
+#define IOC_T2GO	(0x68)
+#define IOC_T2LATCH	(0x6c)
+
+#define IOC_T3CNTL	(0x70)
+#define IOC_T3LTCHL	(0x70)
+#define IOC_T3CNTH	(0x74)
+#define IOC_T3LTCHH	(0x74)
+#define IOC_T3GO	(0x78)
+#define IOC_T3LATCH	(0x7c)
+
+#endif
diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h
new file mode 100644
index 00000000000..9c5afbd71a6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iomd.h
@@ -0,0 +1,226 @@
+/*
+ *  arch/arm/include/asm/hardware/iomd.h
+ *
+ *  Copyright (C) 1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains information out the IOMD ASIC used in the
+ *  Acorn RiscPC and subsequently integrated into the CLPS7500 chips.
+ */
+#ifndef __ASMARM_HARDWARE_IOMD_H
+#define __ASMARM_HARDWARE_IOMD_H
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use __raw_base variants here so that we give the compiler the
+ * chance to keep IOC_BASE in a register.
+ */
+#define iomd_readb(off)		__raw_readb(IOMD_BASE + (off))
+#define iomd_readl(off)		__raw_readl(IOMD_BASE + (off))
+#define iomd_writeb(val,off)	__raw_writeb(val, IOMD_BASE + (off))
+#define iomd_writel(val,off)	__raw_writel(val, IOMD_BASE + (off))
+
+#endif
+
+#define IOMD_CONTROL	(0x000)
+#define IOMD_KARTTX	(0x004)
+#define IOMD_KARTRX	(0x004)
+#define IOMD_KCTRL	(0x008)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_IOLINES	(0x00C)
+#endif
+
+#define IOMD_IRQSTATA	(0x010)
+#define IOMD_IRQREQA	(0x014)
+#define IOMD_IRQCLRA	(0x014)
+#define IOMD_IRQMASKA	(0x018)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_SUSMODE	(0x01C)
+#endif
+
+#define IOMD_IRQSTATB	(0x020)
+#define IOMD_IRQREQB	(0x024)
+#define IOMD_IRQMASKB	(0x028)
+
+#define IOMD_FIQSTAT	(0x030)
+#define IOMD_FIQREQ	(0x034)
+#define IOMD_FIQMASK	(0x038)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_CLKCTL	(0x03C)
+#endif
+
+#define IOMD_T0CNTL	(0x040)
+#define IOMD_T0LTCHL	(0x040)
+#define IOMD_T0CNTH	(0x044)
+#define IOMD_T0LTCHH	(0x044)
+#define IOMD_T0GO	(0x048)
+#define IOMD_T0LATCH	(0x04c)
+
+#define IOMD_T1CNTL	(0x050)
+#define IOMD_T1LTCHL	(0x050)
+#define IOMD_T1CNTH	(0x054)
+#define IOMD_T1LTCHH	(0x054)
+#define IOMD_T1GO	(0x058)
+#define IOMD_T1LATCH	(0x05c)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_IRQSTATC	(0x060)
+#define IOMD_IRQREQC	(0x064)
+#define IOMD_IRQMASKC	(0x068)
+
+#define IOMD_VIDMUX	(0x06c)
+
+#define IOMD_IRQSTATD	(0x070)
+#define IOMD_IRQREQD	(0x074)
+#define IOMD_IRQMASKD	(0x078)
+#endif
+
+#define IOMD_ROMCR0	(0x080)
+#define IOMD_ROMCR1	(0x084)
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DRAMCR	(0x088)
+#endif
+#define IOMD_REFCR	(0x08C)
+
+#define IOMD_FSIZE	(0x090)
+#define IOMD_ID0	(0x094)
+#define IOMD_ID1	(0x098)
+#define IOMD_VERSION	(0x09C)
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_MOUSEX	(0x0A0)
+#define IOMD_MOUSEY	(0x0A4)
+#endif
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_MSEDAT	(0x0A8)
+#define IOMD_MSECTL	(0x0Ac)
+#endif
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DMATCR	(0x0C0)
+#endif
+#define IOMD_IOTCR	(0x0C4)
+#define IOMD_ECTCR	(0x0C8)
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DMAEXT	(0x0CC)
+#endif
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_ASTCR	(0x0CC)
+#define IOMD_DRAMCR	(0x0D0)
+#define IOMD_SELFREF	(0x0D4)
+#define IOMD_ATODICR	(0x0E0)
+#define IOMD_ATODSR	(0x0E4)
+#define IOMD_ATODCC	(0x0E8)
+#define IOMD_ATODCNT1	(0x0EC)
+#define IOMD_ATODCNT2	(0x0F0)
+#define IOMD_ATODCNT3	(0x0F4)
+#define IOMD_ATODCNT4	(0x0F8)
+#endif
+
+#ifdef CONFIG_ARCH_RPC
+#define DMA_EXT_IO0	1
+#define DMA_EXT_IO1	2
+#define DMA_EXT_IO2	4
+#define DMA_EXT_IO3	8
+
+#define IOMD_IO0CURA	(0x100)
+#define IOMD_IO0ENDA	(0x104)
+#define IOMD_IO0CURB	(0x108)
+#define IOMD_IO0ENDB	(0x10C)
+#define IOMD_IO0CR	(0x110)
+#define IOMD_IO0ST	(0x114)
+
+#define IOMD_IO1CURA	(0x120)
+#define IOMD_IO1ENDA	(0x124)
+#define IOMD_IO1CURB	(0x128)
+#define IOMD_IO1ENDB	(0x12C)
+#define IOMD_IO1CR	(0x130)
+#define IOMD_IO1ST	(0x134)
+
+#define IOMD_IO2CURA	(0x140)
+#define IOMD_IO2ENDA	(0x144)
+#define IOMD_IO2CURB	(0x148)
+#define IOMD_IO2ENDB	(0x14C)
+#define IOMD_IO2CR	(0x150)
+#define IOMD_IO2ST	(0x154)
+
+#define IOMD_IO3CURA	(0x160)
+#define IOMD_IO3ENDA	(0x164)
+#define IOMD_IO3CURB	(0x168)
+#define IOMD_IO3ENDB	(0x16C)
+#define IOMD_IO3CR	(0x170)
+#define IOMD_IO3ST	(0x174)
+#endif
+
+#define IOMD_SD0CURA	(0x180)
+#define IOMD_SD0ENDA	(0x184)
+#define IOMD_SD0CURB	(0x188)
+#define IOMD_SD0ENDB	(0x18C)
+#define IOMD_SD0CR	(0x190)
+#define IOMD_SD0ST	(0x194)
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_SD1CURA	(0x1A0)
+#define IOMD_SD1ENDA	(0x1A4)
+#define IOMD_SD1CURB	(0x1A8)
+#define IOMD_SD1ENDB	(0x1AC)
+#define IOMD_SD1CR	(0x1B0)
+#define IOMD_SD1ST	(0x1B4)
+#endif
+
+#define IOMD_CURSCUR	(0x1C0)
+#define IOMD_CURSINIT	(0x1C4)
+
+#define IOMD_VIDCUR	(0x1D0)
+#define IOMD_VIDEND	(0x1D4)
+#define IOMD_VIDSTART	(0x1D8)
+#define IOMD_VIDINIT	(0x1DC)
+#define IOMD_VIDCR	(0x1E0)
+
+#define IOMD_DMASTAT	(0x1F0)
+#define IOMD_DMAREQ	(0x1F4)
+#define IOMD_DMAMASK	(0x1F8)
+
+#define DMA_END_S	(1 << 31)
+#define DMA_END_L	(1 << 30)
+
+#define DMA_CR_C	0x80
+#define DMA_CR_D	0x40
+#define DMA_CR_E	0x20
+
+#define DMA_ST_OFL	4
+#define DMA_ST_INT	2
+#define DMA_ST_AB	1
+
+/*
+ * DMA (MEMC) compatibility
+ */
+#define HALF_SAM	vram_half_sam
+#define VDMA_ALIGNMENT	(HALF_SAM * 2)
+#define VDMA_XFERSIZE	(HALF_SAM)
+#define VDMA_INIT	IOMD_VIDINIT
+#define VDMA_START	IOMD_VIDSTART
+#define VDMA_END	IOMD_VIDEND
+
+#ifndef __ASSEMBLY__
+extern unsigned int vram_half_sam;
+#define video_set_dma(start,end,offset)				\
+do {								\
+	outl (SCREEN_START + start, VDMA_START);		\
+	outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END);	\
+	if (offset >= end - VDMA_XFERSIZE)			\
+		offset |= 0x40000000;				\
+	outl (SCREEN_START + offset, VDMA_INIT);		\
+} while (0)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
new file mode 100644
index 00000000000..87bff09633a
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -0,0 +1,888 @@
+/*
+ * Copyright © 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _ADMA_H
+#define _ADMA_H
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop_adma.h>
+
+/* Memory copy units */
+#define DMA_CCR(chan)		(chan->mmr_base + 0x0)
+#define DMA_CSR(chan)		(chan->mmr_base + 0x4)
+#define DMA_DAR(chan)		(chan->mmr_base + 0xc)
+#define DMA_NDAR(chan)		(chan->mmr_base + 0x10)
+#define DMA_PADR(chan)		(chan->mmr_base + 0x14)
+#define DMA_PUADR(chan)	(chan->mmr_base + 0x18)
+#define DMA_LADR(chan)		(chan->mmr_base + 0x1c)
+#define DMA_BCR(chan)		(chan->mmr_base + 0x20)
+#define DMA_DCR(chan)		(chan->mmr_base + 0x24)
+
+/* Application accelerator unit  */
+#define AAU_ACR(chan)		(chan->mmr_base + 0x0)
+#define AAU_ASR(chan)		(chan->mmr_base + 0x4)
+#define AAU_ADAR(chan)		(chan->mmr_base + 0x8)
+#define AAU_ANDAR(chan)	(chan->mmr_base + 0xc)
+#define AAU_SAR(src, chan)	(chan->mmr_base + (0x10 + ((src) << 2)))
+#define AAU_DAR(chan)		(chan->mmr_base + 0x20)
+#define AAU_ABCR(chan)		(chan->mmr_base + 0x24)
+#define AAU_ADCR(chan)		(chan->mmr_base + 0x28)
+#define AAU_SAR_EDCR(src_edc)	(chan->mmr_base + (0x02c + ((src_edc-4) << 2)))
+#define AAU_EDCR0_IDX	8
+#define AAU_EDCR1_IDX	17
+#define AAU_EDCR2_IDX	26
+
+#define DMA0_ID 0
+#define DMA1_ID 1
+#define AAU_ID 2
+
+struct iop3xx_aau_desc_ctrl {
+	unsigned int int_en:1;
+	unsigned int blk1_cmd_ctrl:3;
+	unsigned int blk2_cmd_ctrl:3;
+	unsigned int blk3_cmd_ctrl:3;
+	unsigned int blk4_cmd_ctrl:3;
+	unsigned int blk5_cmd_ctrl:3;
+	unsigned int blk6_cmd_ctrl:3;
+	unsigned int blk7_cmd_ctrl:3;
+	unsigned int blk8_cmd_ctrl:3;
+	unsigned int blk_ctrl:2;
+	unsigned int dual_xor_en:1;
+	unsigned int tx_complete:1;
+	unsigned int zero_result_err:1;
+	unsigned int zero_result_en:1;
+	unsigned int dest_write_en:1;
+};
+
+struct iop3xx_aau_e_desc_ctrl {
+	unsigned int reserved:1;
+	unsigned int blk1_cmd_ctrl:3;
+	unsigned int blk2_cmd_ctrl:3;
+	unsigned int blk3_cmd_ctrl:3;
+	unsigned int blk4_cmd_ctrl:3;
+	unsigned int blk5_cmd_ctrl:3;
+	unsigned int blk6_cmd_ctrl:3;
+	unsigned int blk7_cmd_ctrl:3;
+	unsigned int blk8_cmd_ctrl:3;
+	unsigned int reserved2:7;
+};
+
+struct iop3xx_dma_desc_ctrl {
+	unsigned int pci_transaction:4;
+	unsigned int int_en:1;
+	unsigned int dac_cycle_en:1;
+	unsigned int mem_to_mem_en:1;
+	unsigned int crc_data_tx_en:1;
+	unsigned int crc_gen_en:1;
+	unsigned int crc_seed_dis:1;
+	unsigned int reserved:21;
+	unsigned int crc_tx_complete:1;
+};
+
+struct iop3xx_desc_dma {
+	u32 next_desc;
+	union {
+		u32 pci_src_addr;
+		u32 pci_dest_addr;
+		u32 src_addr;
+	};
+	union {
+		u32 upper_pci_src_addr;
+		u32 upper_pci_dest_addr;
+	};
+	union {
+		u32 local_pci_src_addr;
+		u32 local_pci_dest_addr;
+		u32 dest_addr;
+	};
+	u32 byte_count;
+	union {
+		u32 desc_ctrl;
+		struct iop3xx_dma_desc_ctrl desc_ctrl_field;
+	};
+	u32 crc_addr;
+};
+
+struct iop3xx_desc_aau {
+	u32 next_desc;
+	u32 src[4];
+	u32 dest_addr;
+	u32 byte_count;
+	union {
+		u32 desc_ctrl;
+		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
+	};
+	union {
+		u32 src_addr;
+		u32 e_desc_ctrl;
+		struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field;
+	} src_edc[31];
+};
+
+struct iop3xx_aau_gfmr {
+	unsigned int gfmr1:8;
+	unsigned int gfmr2:8;
+	unsigned int gfmr3:8;
+	unsigned int gfmr4:8;
+};
+
+struct iop3xx_desc_pq_xor {
+	u32 next_desc;
+	u32 src[3];
+	union {
+		u32 data_mult1;
+		struct iop3xx_aau_gfmr data_mult1_field;
+	};
+	u32 dest_addr;
+	u32 byte_count;
+	union {
+		u32 desc_ctrl;
+		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
+	};
+	union {
+		u32 src_addr;
+		u32 e_desc_ctrl;
+		struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field;
+		u32 data_multiplier;
+		struct iop3xx_aau_gfmr data_mult_field;
+		u32 reserved;
+	} src_edc_gfmr[19];
+};
+
+struct iop3xx_desc_dual_xor {
+	u32 next_desc;
+	u32 src0_addr;
+	u32 src1_addr;
+	u32 h_src_addr;
+	u32 d_src_addr;
+	u32 h_dest_addr;
+	u32 byte_count;
+	union {
+		u32 desc_ctrl;
+		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
+	};
+	u32 d_dest_addr;
+};
+
+union iop3xx_desc {
+	struct iop3xx_desc_aau *aau;
+	struct iop3xx_desc_dma *dma;
+	struct iop3xx_desc_pq_xor *pq_xor;
+	struct iop3xx_desc_dual_xor *dual_xor;
+	void *ptr;
+};
+
+static inline int iop_adma_get_max_xor(void)
+{
+	return 32;
+}
+
+static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
+{
+	int id = chan->device->id;
+
+	switch (id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return __raw_readl(DMA_DAR(chan));
+	case AAU_ID:
+		return __raw_readl(AAU_ADAR(chan));
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
+						u32 next_desc_addr)
+{
+	int id = chan->device->id;
+
+	switch (id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		__raw_writel(next_desc_addr, DMA_NDAR(chan));
+		break;
+	case AAU_ID:
+		__raw_writel(next_desc_addr, AAU_ANDAR(chan));
+		break;
+	}
+
+}
+
+#define IOP_ADMA_STATUS_BUSY (1 << 10)
+#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT (1024)
+#define IOP_ADMA_XOR_MAX_BYTE_COUNT (16 * 1024 * 1024)
+#define IOP_ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024)
+
+static inline int iop_chan_is_busy(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(DMA_CSR(chan));
+	return (status & IOP_ADMA_STATUS_BUSY) ? 1 : 0;
+}
+
+static inline int iop_desc_is_aligned(struct iop_adma_desc_slot *desc,
+					int num_slots)
+{
+	/* num_slots will only ever be 1, 2, 4, or 8 */
+	return (desc->idx & (num_slots - 1)) ? 0 : 1;
+}
+
+/* to do: support large (i.e. > hw max) buffer sizes */
+static inline int iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+/* to do: support large (i.e. > hw max) buffer sizes */
+static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt,
+					int *slots_per_op)
+{
+	static const char slot_count_table[] = {
+						1, 1, 1, 1, /* 01 - 04 */
+						2, 2, 2, 2, /* 05 - 08 */
+						4, 4, 4, 4, /* 09 - 12 */
+						4, 4, 4, 4, /* 13 - 16 */
+						8, 8, 8, 8, /* 17 - 20 */
+						8, 8, 8, 8, /* 21 - 24 */
+						8, 8, 8, 8, /* 25 - 28 */
+						8, 8, 8, 8, /* 29 - 32 */
+					      };
+	*slots_per_op = slot_count_table[src_cnt - 1];
+	return *slots_per_op;
+}
+
+static inline int
+iop_chan_interrupt_slot_count(int *slots_per_op, struct iop_adma_chan *chan)
+{
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return iop_chan_memcpy_slot_count(0, slots_per_op);
+	case AAU_ID:
+		return iop3xx_aau_xor_slot_count(0, 2, slots_per_op);
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static inline int iop_chan_xor_slot_count(size_t len, int src_cnt,
+						int *slots_per_op)
+{
+	int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op);
+
+	if (len <= IOP_ADMA_XOR_MAX_BYTE_COUNT)
+		return slot_cnt;
+
+	len -= IOP_ADMA_XOR_MAX_BYTE_COUNT;
+	while (len > IOP_ADMA_XOR_MAX_BYTE_COUNT) {
+		len -= IOP_ADMA_XOR_MAX_BYTE_COUNT;
+		slot_cnt += *slots_per_op;
+	}
+
+	if (len)
+		slot_cnt += *slots_per_op;
+
+	return slot_cnt;
+}
+
+/* zero sum on iop3xx is limited to 1k at a time so it requires multiple
+ * descriptors
+ */
+static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
+						int *slots_per_op)
+{
+	int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op);
+
+	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT)
+		return slot_cnt;
+
+	len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+	while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+		slot_cnt += *slots_per_op;
+	}
+
+	if (len)
+		slot_cnt += *slots_per_op;
+
+	return slot_cnt;
+}
+
+static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return hw_desc.dma->dest_addr;
+	case AAU_ID:
+		return hw_desc.aau->dest_addr;
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return hw_desc.dma->byte_count;
+	case AAU_ID:
+		return hw_desc.aau->byte_count;
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+/* translate the src_idx to a descriptor word index */
+static inline int __desc_idx(int src_idx)
+{
+	static const int desc_idx_table[] = { 0, 0, 0, 0,
+					      0, 1, 2, 3,
+					      5, 6, 7, 8,
+					      9, 10, 11, 12,
+					      14, 15, 16, 17,
+					      18, 19, 20, 21,
+					      23, 24, 25, 26,
+					      27, 28, 29, 30,
+					    };
+
+	return desc_idx_table[src_idx];
+}
+
+static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					int src_idx)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return hw_desc.dma->src_addr;
+	case AAU_ID:
+		break;
+	default:
+		BUG();
+	}
+
+	if (src_idx < 4)
+		return hw_desc.aau->src[src_idx];
+	else
+		return hw_desc.aau->src_edc[__desc_idx(src_idx)].src_addr;
+}
+
+static inline void iop3xx_aau_desc_set_src_addr(struct iop3xx_desc_aau *hw_desc,
+					int src_idx, dma_addr_t addr)
+{
+	if (src_idx < 4)
+		hw_desc->src[src_idx] = addr;
+	else
+		hw_desc->src_edc[__desc_idx(src_idx)].src_addr = addr;
+}
+
+static inline void
+iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop3xx_desc_dma *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop3xx_dma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.mem_to_mem_en = 1;
+	u_desc_ctrl.field.pci_transaction = 0xe; /* memory read block */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->upper_pci_src_addr = 0;
+	hw_desc->crc_addr = 0;
+}
+
+static inline void
+iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop3xx_aau_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.blk1_cmd_ctrl = 0x2; /* memory block fill */
+	u_desc_ctrl.field.dest_write_en = 1;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
+static inline u32
+iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt,
+		     unsigned long flags)
+{
+	int i, shift;
+	u32 edcr;
+	union {
+		u32 value;
+		struct iop3xx_aau_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	switch (src_cnt) {
+	case 25 ... 32:
+		u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
+		edcr = 0;
+		shift = 1;
+		for (i = 24; i < src_cnt; i++) {
+			edcr |= (1 << shift);
+			shift += 3;
+		}
+		hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr;
+		src_cnt = 24;
+		/* fall through */
+	case 17 ... 24:
+		if (!u_desc_ctrl.field.blk_ctrl) {
+			hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
+			u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
+		}
+		edcr = 0;
+		shift = 1;
+		for (i = 16; i < src_cnt; i++) {
+			edcr |= (1 << shift);
+			shift += 3;
+		}
+		hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr;
+		src_cnt = 16;
+		/* fall through */
+	case 9 ... 16:
+		if (!u_desc_ctrl.field.blk_ctrl)
+			u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
+		edcr = 0;
+		shift = 1;
+		for (i = 8; i < src_cnt; i++) {
+			edcr |= (1 << shift);
+			shift += 3;
+		}
+		hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr;
+		src_cnt = 8;
+		/* fall through */
+	case 2 ... 8:
+		shift = 1;
+		for (i = 0; i < src_cnt; i++) {
+			u_desc_ctrl.value |= (1 << shift);
+			shift += 3;
+		}
+
+		if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
+			u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
+	}
+
+	u_desc_ctrl.field.dest_write_en = 1;
+	u_desc_ctrl.field.blk1_cmd_ctrl = 0x7; /* direct fill */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+
+	return u_desc_ctrl.value;
+}
+
+static inline void
+iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	iop3xx_desc_init_xor(desc->hw_desc, src_cnt, flags);
+}
+
+/* return the number of operations */
+static inline int
+iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+		       unsigned long flags)
+{
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	struct iop3xx_desc_aau *hw_desc, *prev_hw_desc, *iter;
+	union {
+		u32 value;
+		struct iop3xx_aau_desc_ctrl field;
+	} u_desc_ctrl;
+	int i, j;
+
+	hw_desc = desc->hw_desc;
+
+	for (i = 0, j = 0; (slot_cnt -= slots_per_op) >= 0;
+		i += slots_per_op, j++) {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		u_desc_ctrl.value = iop3xx_desc_init_xor(iter, src_cnt, flags);
+		u_desc_ctrl.field.dest_write_en = 0;
+		u_desc_ctrl.field.zero_result_en = 1;
+		u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+		iter->desc_ctrl = u_desc_ctrl.value;
+
+		/* for the subsequent descriptors preserve the store queue
+		 * and chain them together
+		 */
+		if (i) {
+			prev_hw_desc =
+				iop_hw_desc_slot_idx(hw_desc, i - slots_per_op);
+			prev_hw_desc->next_desc =
+				(u32) (desc->async_tx.phys + (i << 5));
+		}
+	}
+
+	return j;
+}
+
+static inline void
+iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt,
+		       unsigned long flags)
+{
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop3xx_aau_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	switch (src_cnt) {
+	case 25 ... 32:
+		u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
+		hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
+		/* fall through */
+	case 17 ... 24:
+		if (!u_desc_ctrl.field.blk_ctrl) {
+			hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
+			u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
+		}
+		hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0;
+		/* fall through */
+	case 9 ... 16:
+		if (!u_desc_ctrl.field.blk_ctrl)
+			u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
+		hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0;
+		/* fall through */
+	case 1 ... 8:
+		if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
+			u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
+	}
+
+	u_desc_ctrl.field.dest_write_en = 0;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
+static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					u32 byte_count)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		hw_desc.dma->byte_count = byte_count;
+		break;
+	case AAU_ID:
+		hw_desc.aau->byte_count = byte_count;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void
+iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
+			struct iop_adma_chan *chan)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		iop_desc_init_memcpy(desc, 1);
+		hw_desc.dma->byte_count = 0;
+		hw_desc.dma->dest_addr = 0;
+		hw_desc.dma->src_addr = 0;
+		break;
+	case AAU_ID:
+		iop_desc_init_null_xor(desc, 2, 1);
+		hw_desc.aau->byte_count = 0;
+		hw_desc.aau->dest_addr = 0;
+		hw_desc.aau->src[0] = 0;
+		hw_desc.aau->src[1] = 0;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void
+iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+	int slots_per_op = desc->slots_per_op;
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
+	int i = 0;
+
+	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		hw_desc->byte_count = len;
+	} else {
+		do {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			i += slots_per_op;
+		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
+
+		if (len) {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = len;
+		}
+	}
+}
+
+static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					dma_addr_t addr)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		hw_desc.dma->dest_addr = addr;
+		break;
+	case AAU_ID:
+		hw_desc.aau->dest_addr = addr;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
+					dma_addr_t addr)
+{
+	struct iop3xx_desc_dma *hw_desc = desc->hw_desc;
+	hw_desc->src_addr = addr;
+}
+
+static inline void
+iop_desc_set_zero_sum_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+				dma_addr_t addr)
+{
+
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	int i;
+
+	for (i = 0; (slot_cnt -= slots_per_op) >= 0;
+		i += slots_per_op, addr += IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iop3xx_aau_desc_set_src_addr(iter, src_idx, addr);
+	}
+}
+
+static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
+					int src_idx, dma_addr_t addr)
+{
+
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	int i;
+
+	for (i = 0; (slot_cnt -= slots_per_op) >= 0;
+		i += slots_per_op, addr += IOP_ADMA_XOR_MAX_BYTE_COUNT) {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iop3xx_aau_desc_set_src_addr(iter, src_idx, addr);
+	}
+}
+
+static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
+					u32 next_desc_addr)
+{
+	/* hw_desc->next_desc is the same location for all channels */
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+	BUG_ON(hw_desc.dma->next_desc);
+	hw_desc.dma->next_desc = next_desc_addr;
+}
+
+static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
+{
+	/* hw_desc->next_desc is the same location for all channels */
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+	return hw_desc.dma->next_desc;
+}
+
+static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
+{
+	/* hw_desc->next_desc is the same location for all channels */
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+	hw_desc.dma->next_desc = 0;
+}
+
+static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
+						u32 val)
+{
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
+	hw_desc->src[0] = val;
+}
+
+static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+{
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
+	struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
+
+	BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
+	return desc_ctrl.zero_result_err;
+}
+
+static inline void iop_chan_append(struct iop_adma_chan *chan)
+{
+	u32 dma_chan_ctrl;
+
+	dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
+	dma_chan_ctrl |= 0x2;
+	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
+}
+
+static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
+{
+	return __raw_readl(DMA_CSR(chan));
+}
+
+static inline void iop_chan_disable(struct iop_adma_chan *chan)
+{
+	u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
+	dma_chan_ctrl &= ~1;
+	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
+}
+
+static inline void iop_chan_enable(struct iop_adma_chan *chan)
+{
+	u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
+
+	dma_chan_ctrl |= 1;
+	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
+}
+
+static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(DMA_CSR(chan));
+	status &= (1 << 9);
+	__raw_writel(status, DMA_CSR(chan));
+}
+
+static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(DMA_CSR(chan));
+	status &= (1 << 8);
+	__raw_writel(status, DMA_CSR(chan));
+}
+
+static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(DMA_CSR(chan));
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		status &= (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1);
+		break;
+	case AAU_ID:
+		status &= (1 << 5);
+		break;
+	default:
+		BUG();
+	}
+
+	__raw_writel(status, DMA_CSR(chan));
+}
+
+static inline int
+iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(5, &status);
+}
+
+static inline int
+iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return test_bit(2, &status);
+	default:
+		return 0;
+	}
+}
+
+static inline int
+iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return test_bit(3, &status);
+	default:
+		return 0;
+	}
+}
+
+static inline int
+iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
+{
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return test_bit(1, &status);
+	default:
+		return 0;
+	}
+}
+#endif /* _ADMA_H */
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
new file mode 100644
index 00000000000..b69d972b1f7
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/include/asm/hardware/iop3xx-gpio.h
+ *
+ * IOP3xx GPIO wrappers
+ *
+ * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Based on IXP4XX gpio.h file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
+#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+#define IOP3XX_N_GPIOS	8
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (gpio > IOP3XX_N_GPIOS)
+		return __gpio_get_value(gpio);
+
+	return gpio_line_get(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (gpio > IOP3XX_N_GPIOS) {
+		__gpio_set_value(gpio, value);
+		return;
+	}
+	gpio_line_set(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	if (gpio < IOP3XX_N_GPIOS)
+		return 0;
+	else
+		return __gpio_cansleep(gpio);
+}
+
+/*
+ * The GPIOs are not generating any interrupt
+ * Note : manuals are not clear about this
+ */
+static inline int gpio_to_irq(int gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int gpio)
+{
+	return -EINVAL;
+}
+
+#endif
+
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
new file mode 100644
index 00000000000..4b8e7f55992
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -0,0 +1,312 @@
+/*
+ * arch/arm/include/asm/hardware/iop3xx.h
+ *
+ * Intel IOP32X and IOP33X register definitions
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP3XX_H
+#define __IOP3XX_H
+
+/*
+ * IOP3XX GPIO handling
+ */
+#define GPIO_IN			0
+#define GPIO_OUT		1
+#define GPIO_LOW		0
+#define GPIO_HIGH		1
+#define IOP3XX_GPIO_LINE(x)	(x)
+
+#ifndef __ASSEMBLY__
+extern void gpio_line_config(int line, int direction);
+extern int  gpio_line_get(int line);
+extern void gpio_line_set(int line, int value);
+extern int init_atu;
+extern int iop3xx_get_init_atu(void);
+#endif
+
+
+/*
+ * IOP3XX processor registers
+ */
+#define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
+#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfeffe000
+#define IOP3XX_PERIPHERAL_SIZE		0x00002000
+#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
+					IOP3XX_PERIPHERAL_SIZE - 1)
+#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
+					IOP3XX_PERIPHERAL_SIZE - 1)
+#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
+					(IOP3XX_PERIPHERAL_PHYS_BASE\
+					- IOP3XX_PERIPHERAL_VIRT_BASE))
+#define IOP3XX_REG_ADDR(reg)		(IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
+
+/* Address Translation Unit  */
+#define IOP3XX_ATUVID		(volatile u16 *)IOP3XX_REG_ADDR(0x0100)
+#define IOP3XX_ATUDID		(volatile u16 *)IOP3XX_REG_ADDR(0x0102)
+#define IOP3XX_ATUCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x0104)
+#define IOP3XX_ATUSR		(volatile u16 *)IOP3XX_REG_ADDR(0x0106)
+#define IOP3XX_ATURID		(volatile u8  *)IOP3XX_REG_ADDR(0x0108)
+#define IOP3XX_ATUCCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0109)
+#define IOP3XX_ATUCLSR		(volatile u8  *)IOP3XX_REG_ADDR(0x010c)
+#define IOP3XX_ATULT		(volatile u8  *)IOP3XX_REG_ADDR(0x010d)
+#define IOP3XX_ATUHTR		(volatile u8  *)IOP3XX_REG_ADDR(0x010e)
+#define IOP3XX_ATUBIST		(volatile u8  *)IOP3XX_REG_ADDR(0x010f)
+#define IOP3XX_IABAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0110)
+#define IOP3XX_IAUBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0114)
+#define IOP3XX_IABAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0118)
+#define IOP3XX_IAUBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x011c)
+#define IOP3XX_IABAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0120)
+#define IOP3XX_IAUBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0124)
+#define IOP3XX_ASVIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012c)
+#define IOP3XX_ASIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012e)
+#define IOP3XX_ERBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0130)
+#define IOP3XX_ATUILR		(volatile u8  *)IOP3XX_REG_ADDR(0x013c)
+#define IOP3XX_ATUIPR		(volatile u8  *)IOP3XX_REG_ADDR(0x013d)
+#define IOP3XX_ATUMGNT		(volatile u8  *)IOP3XX_REG_ADDR(0x013e)
+#define IOP3XX_ATUMLAT		(volatile u8  *)IOP3XX_REG_ADDR(0x013f)
+#define IOP3XX_IALR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0140)
+#define IOP3XX_IATVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0144)
+#define IOP3XX_ERLR		(volatile u32 *)IOP3XX_REG_ADDR(0x0148)
+#define IOP3XX_ERTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x014c)
+#define IOP3XX_IALR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0150)
+#define IOP3XX_IALR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0154)
+#define IOP3XX_IATVR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0158)
+#define IOP3XX_OIOWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x015c)
+#define IOP3XX_OMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0160)
+#define IOP3XX_OUMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0164)
+#define IOP3XX_OMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0168)
+#define IOP3XX_OUMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x016c)
+#define IOP3XX_OUDWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x0178)
+#define IOP3XX_ATUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0180)
+#define IOP3XX_PCSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0184)
+#define IOP3XX_ATUISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0188)
+#define IOP3XX_ATUIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x018c)
+#define IOP3XX_IABAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0190)
+#define IOP3XX_IAUBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0194)
+#define IOP3XX_IALR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0198)
+#define IOP3XX_IATVR3		(volatile u32 *)IOP3XX_REG_ADDR(0x019c)
+#define IOP3XX_OCCAR		(volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
+#define IOP3XX_OCCDR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
+#define IOP3XX_PDSCR		(volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
+#define IOP3XX_PMCAPID		(volatile u8  *)IOP3XX_REG_ADDR(0x01c0)
+#define IOP3XX_PMNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01c1)
+#define IOP3XX_APMCR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
+#define IOP3XX_APMCSR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
+#define IOP3XX_PCIXCAPID	(volatile u8  *)IOP3XX_REG_ADDR(0x01e0)
+#define IOP3XX_PCIXNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01e1)
+#define IOP3XX_PCIXCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
+#define IOP3XX_PCIXSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
+#define IOP3XX_PCIIRSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
+#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
+#define IOP3XX_PCSR_IN_Q_BUSY	(1 << 14)
+#define IOP3XX_ATUCR_OUT_EN	(1 << 1)
+
+#define IOP3XX_INIT_ATU_DEFAULT 0
+#define IOP3XX_INIT_ATU_DISABLE -1
+#define IOP3XX_INIT_ATU_ENABLE	 1
+
+/* Messaging Unit  */
+#define IOP3XX_IMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0310)
+#define IOP3XX_IMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0314)
+#define IOP3XX_OMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0318)
+#define IOP3XX_OMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x031c)
+#define IOP3XX_IDR		(volatile u32 *)IOP3XX_REG_ADDR(0x0320)
+#define IOP3XX_IISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0324)
+#define IOP3XX_IIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0328)
+#define IOP3XX_ODR		(volatile u32 *)IOP3XX_REG_ADDR(0x032c)
+#define IOP3XX_OISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0330)
+#define IOP3XX_OIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0334)
+#define IOP3XX_MUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0350)
+#define IOP3XX_QBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0354)
+#define IOP3XX_IFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0360)
+#define IOP3XX_IFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0364)
+#define IOP3XX_IPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0368)
+#define IOP3XX_IPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x036c)
+#define IOP3XX_OFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0370)
+#define IOP3XX_OFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0374)
+#define IOP3XX_OPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0378)
+#define IOP3XX_OPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x037c)
+#define IOP3XX_IAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0380)
+
+/* DMA Controller  */
+#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
+					(0x400 + (chan << 6)))
+#define IOP3XX_DMA_UPPER_PA(chan)  (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
+
+/* Peripheral bus interface  */
+#define IOP3XX_PBCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0680)
+#define IOP3XX_PBISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0684)
+#define IOP3XX_PBBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0688)
+#define IOP3XX_PBLR0		(volatile u32 *)IOP3XX_REG_ADDR(0x068c)
+#define IOP3XX_PBBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0690)
+#define IOP3XX_PBLR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0694)
+#define IOP3XX_PBBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0698)
+#define IOP3XX_PBLR2		(volatile u32 *)IOP3XX_REG_ADDR(0x069c)
+#define IOP3XX_PBBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
+#define IOP3XX_PBLR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
+#define IOP3XX_PBBAR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
+#define IOP3XX_PBLR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
+#define IOP3XX_PBBAR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
+#define IOP3XX_PBLR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
+#define IOP3XX_PMBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
+#define IOP3XX_PMBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
+#define IOP3XX_PMBR2		(volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
+
+/* Peripheral performance monitoring unit  */
+#define IOP3XX_GTMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0700)
+#define IOP3XX_ESR		(volatile u32 *)IOP3XX_REG_ADDR(0x0704)
+#define IOP3XX_EMISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0708)
+#define IOP3XX_GTSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
+/* PERCR0 DOESN'T EXIST - index from 1! */
+#define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
+
+/* General Purpose I/O  */
+#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
+#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
+#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
+
+/* Timers  */
+#define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
+#define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
+#define IOP3XX_TU_TCR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0008)
+#define IOP3XX_TU_TCR1		(volatile u32 *)IOP3XX_TIMER_REG(0x000c)
+#define IOP3XX_TU_TRR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0010)
+#define IOP3XX_TU_TRR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0014)
+#define IOP3XX_TU_TISR		(volatile u32 *)IOP3XX_TIMER_REG(0x0018)
+#define IOP3XX_TU_WDTCR		(volatile u32 *)IOP3XX_TIMER_REG(0x001c)
+#define IOP_TMR_EN	    0x02
+#define IOP_TMR_RELOAD	    0x04
+#define IOP_TMR_PRIVILEGED 0x08
+#define IOP_TMR_RATIO_1_1  0x00
+
+/* Watchdog timer definitions */
+#define IOP_WDTCR_EN_ARM        0x1e1e1e1e
+#define IOP_WDTCR_EN            0xe1e1e1e1
+/* iop3xx does not support stopping the watchdog, so we just re-arm */
+#define IOP_WDTCR_DIS_ARM	(IOP_WDTCR_EN_ARM)
+#define IOP_WDTCR_DIS		(IOP_WDTCR_EN)
+
+/* Application accelerator unit  */
+#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
+#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
+
+/* I2C bus interface unit  */
+#define IOP3XX_ICR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1680)
+#define IOP3XX_ISR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1684)
+#define IOP3XX_ISAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1688)
+#define IOP3XX_IDBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x168c)
+#define IOP3XX_IBMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1694)
+#define IOP3XX_ICR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
+#define IOP3XX_ISR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
+#define IOP3XX_ISAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
+#define IOP3XX_IDBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
+#define IOP3XX_IBMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
+
+
+/*
+ * IOP3XX I/O and Mem space regions for PCI autoconfiguration
+ */
+#define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
+
+#define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
+#define IOP3XX_PCI_LOWER_IO_PA		0x90000000
+#define IOP3XX_PCI_LOWER_IO_VA		0xfe000000
+#define IOP3XX_PCI_LOWER_IO_BA		0x90000000
+#define IOP3XX_PCI_UPPER_IO_PA		(IOP3XX_PCI_LOWER_IO_PA +\
+					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
+#define IOP3XX_PCI_UPPER_IO_VA		(IOP3XX_PCI_LOWER_IO_VA +\
+					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
+#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
+					IOP3XX_PCI_LOWER_IO_PA) +\
+					IOP3XX_PCI_LOWER_IO_VA)
+
+
+#ifndef __ASSEMBLY__
+void iop3xx_map_io(void);
+void iop_init_cp6_handler(void);
+void iop_init_time(unsigned long tickrate);
+unsigned long iop_gettimeoffset(void);
+
+static inline void write_tmr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
+}
+
+static inline void write_tmr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
+}
+
+static inline u32 read_tcr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline u32 read_tcr1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline void write_trr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
+}
+
+static inline void write_trr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
+}
+
+static inline void write_tisr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
+}
+
+static inline u32 read_wdtcr(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
+	return val;
+}
+static inline void write_wdtcr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
+}
+
+extern unsigned long get_iop_tick_rate(void);
+
+/* only iop13xx has these registers, we define these to present a
+ * common register interface for the iop_wdt driver.
+ */
+#define IOP_RCSR_WDT	(0)
+static inline u32 read_rcsr(void)
+{
+	return 0;
+}
+static inline void write_wdtsr(u32 val)
+{
+	do { } while (0);
+}
+
+extern struct platform_device iop3xx_dma_0_channel;
+extern struct platform_device iop3xx_dma_1_channel;
+extern struct platform_device iop3xx_aau_channel;
+extern struct platform_device iop3xx_i2c0_device;
+extern struct platform_device iop3xx_i2c1_device;
+
+#endif
+
+
+#endif
diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
new file mode 100644
index 00000000000..cb7e3611bcb
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iop_adma.h
@@ -0,0 +1,116 @@
+/*
+ * Copyright © 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef IOP_ADMA_H
+#define IOP_ADMA_H
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
+#define IOP_ADMA_SLOT_SIZE 32
+#define IOP_ADMA_THRESHOLD 4
+
+/**
+ * struct iop_adma_device - internal representation of an ADMA device
+ * @pdev: Platform device
+ * @id: HW ADMA Device selector
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
+ * @common: embedded struct dma_device
+ */
+struct iop_adma_device {
+	struct platform_device *pdev;
+	int id;
+	dma_addr_t dma_desc_pool;
+	void *dma_desc_pool_virt;
+	struct dma_device common;
+};
+
+/**
+ * struct iop_adma_chan - internal representation of an ADMA device
+ * @pending: allows batching of hardware operations
+ * @completed_cookie: identifier for the most recently completed operation
+ * @lock: serializes enqueue/dequeue operations to the slot pool
+ * @mmr_base: memory mapped register base
+ * @chain: device chain view of the descriptors
+ * @device: parent device
+ * @common: common dmaengine channel object members
+ * @last_used: place holder for allocation to continue from where it left off
+ * @all_slots: complete domain of slots usable by the channel
+ * @slots_allocated: records the actual size of the descriptor slot pool
+ * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs
+ */
+struct iop_adma_chan {
+	int pending;
+	dma_cookie_t completed_cookie;
+	spinlock_t lock; /* protects the descriptor slot pool */
+	void __iomem *mmr_base;
+	struct list_head chain;
+	struct iop_adma_device *device;
+	struct dma_chan common;
+	struct iop_adma_desc_slot *last_used;
+	struct list_head all_slots;
+	int slots_allocated;
+	struct tasklet_struct irq_tasklet;
+};
+
+/**
+ * struct iop_adma_desc_slot - IOP-ADMA software descriptor
+ * @slot_node: node on the iop_adma_chan.all_slots list
+ * @chain_node: node on the op_adma_chan.chain list
+ * @hw_desc: virtual address of the hardware descriptor chain
+ * @phys: hardware address of the hardware descriptor chain
+ * @group_head: first operation in a transaction
+ * @slot_cnt: total slots used in an transaction (group of operations)
+ * @slots_per_op: number of slots per operation
+ * @idx: pool index
+ * @unmap_src_cnt: number of xor sources
+ * @unmap_len: transaction bytecount
+ * @async_tx: support for the async_tx api
+ * @group_list: list of slots that make up a multi-descriptor transaction
+ *	for example transfer lengths larger than the supported hw max
+ * @xor_check_result: result of zero sum
+ * @crc32_result: result crc calculation
+ */
+struct iop_adma_desc_slot {
+	struct list_head slot_node;
+	struct list_head chain_node;
+	void *hw_desc;
+	struct iop_adma_desc_slot *group_head;
+	u16 slot_cnt;
+	u16 slots_per_op;
+	u16 idx;
+	u16 unmap_src_cnt;
+	size_t unmap_len;
+	struct dma_async_tx_descriptor async_tx;
+	union {
+		u32 *xor_check_result;
+		u32 *crc32_result;
+	};
+};
+
+struct iop_adma_platform_data {
+	int hw_id;
+	dma_cap_mask_t cap_mask;
+	size_t pool_size;
+};
+
+#define to_iop_sw_desc(addr_hw_desc) \
+	container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc)
+#define iop_hw_desc_slot_idx(hw_desc, idx) \
+	( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) )
+#endif
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
new file mode 100644
index 00000000000..74b5fff7f57
--- /dev/null
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/arm/hardware/it8152.h
+ *
+ * Copyright Compulab Ltd., 2006,2007
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * ITE 8152 companion chip register definitions
+ */
+
+#ifndef __ASM_HARDWARE_IT8152_H
+#define __ASM_HARDWARE_IT8152_H
+extern unsigned long it8152_base_address;
+
+#define IT8152_IO_BASE			(it8152_base_address + 0x03e00000)
+#define IT8152_CFGREG_BASE		(it8152_base_address + 0x03f00000)
+
+#define __REG_IT8152(x)			(it8152_base_address + (x))
+
+#define IT8152_PCI_CFG_ADDR		__REG_IT8152(0x3f00800)
+#define IT8152_PCI_CFG_DATA		__REG_IT8152(0x3f00804)
+
+#define IT8152_INTC_LDCNIRR		__REG_IT8152(0x3f00300)
+#define IT8152_INTC_LDPNIRR		__REG_IT8152(0x3f00304)
+#define IT8152_INTC_LDCNIMR		__REG_IT8152(0x3f00308)
+#define IT8152_INTC_LDPNIMR		__REG_IT8152(0x3f0030C)
+#define IT8152_INTC_LDNITR		__REG_IT8152(0x3f00310)
+#define IT8152_INTC_LDNIAR		__REG_IT8152(0x3f00314)
+#define IT8152_INTC_LPCNIRR		__REG_IT8152(0x3f00320)
+#define IT8152_INTC_LPPNIRR		__REG_IT8152(0x3f00324)
+#define IT8152_INTC_LPCNIMR		__REG_IT8152(0x3f00328)
+#define IT8152_INTC_LPPNIMR		__REG_IT8152(0x3f0032C)
+#define IT8152_INTC_LPNITR		__REG_IT8152(0x3f00330)
+#define IT8152_INTC_LPNIAR		__REG_IT8152(0x3f00334)
+#define IT8152_INTC_PDCNIRR		__REG_IT8152(0x3f00340)
+#define IT8152_INTC_PDPNIRR		__REG_IT8152(0x3f00344)
+#define IT8152_INTC_PDCNIMR		__REG_IT8152(0x3f00348)
+#define IT8152_INTC_PDPNIMR		__REG_IT8152(0x3f0034C)
+#define IT8152_INTC_PDNITR		__REG_IT8152(0x3f00350)
+#define IT8152_INTC_PDNIAR		__REG_IT8152(0x3f00354)
+#define IT8152_INTC_INTC_TYPER		__REG_IT8152(0x3f003FC)
+
+#define IT8152_GPIO_GPDR		__REG_IT8152(0x3f00500)
+
+/*
+  Interrupt controller per register summary:
+  ---------------------------------------
+  LCDNIRR:
+  IT8152_LD_IRQ(8) PCICLK stop
+  IT8152_LD_IRQ(7) MCLK ready
+  IT8152_LD_IRQ(6) s/w
+  IT8152_LD_IRQ(5) UART
+  IT8152_LD_IRQ(4) GPIO
+  IT8152_LD_IRQ(3) TIMER 4
+  IT8152_LD_IRQ(2) TIMER 3
+  IT8152_LD_IRQ(1) TIMER 2
+  IT8152_LD_IRQ(0) TIMER 1
+
+  LPCNIRR:
+  IT8152_LP_IRQ(x) serial IRQ x
+
+  PCIDNIRR:
+  IT8152_PD_IRQ(14) PCISERR
+  IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR)
+  IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR)
+  IT8152_PD_IRQ(11) PCI INTD
+  IT8152_PD_IRQ(10) PCI INTC
+  IT8152_PD_IRQ(9)  PCI INTB
+  IT8152_PD_IRQ(8)  PCI INTA
+  IT8152_PD_IRQ(7)  serial INTD
+  IT8152_PD_IRQ(6)  serial INTC
+  IT8152_PD_IRQ(5)  serial INTB
+  IT8152_PD_IRQ(4)  serial INTA
+  IT8152_PD_IRQ(3)  serial IRQ IOCHK (IOCHKR)
+  IT8152_PD_IRQ(2)  chaining DMA (CDMAR)
+  IT8152_PD_IRQ(1)  USB (USBR)
+  IT8152_PD_IRQ(0)  Audio controller (ACR)
+ */
+/* frequently used interrupts */
+#define IT8152_PCISERR		IT8152_PD_IRQ(14)
+#define IT8152_H2PTADR		IT8152_PD_IRQ(13)
+#define IT8152_H2PMAR		IT8152_PD_IRQ(12)
+#define IT8152_PCI_INTD		IT8152_PD_IRQ(11)
+#define IT8152_PCI_INTC		IT8152_PD_IRQ(10)
+#define IT8152_PCI_INTB		IT8152_PD_IRQ(9)
+#define IT8152_PCI_INTA		IT8152_PD_IRQ(8)
+#define IT8152_CDMA_INT		IT8152_PD_IRQ(2)
+#define IT8152_USB_INT		IT8152_PD_IRQ(1)
+#define IT8152_AUDIO_INT	IT8152_PD_IRQ(0)
+
+struct pci_dev;
+struct pci_sys_data;
+
+extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
+extern void it8152_init_irq(void);
+extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
+
+#endif /* __ASM_HARDWARE_IT8152_H */
diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h
new file mode 100644
index 00000000000..7ec91168a57
--- /dev/null
+++ b/arch/arm/include/asm/hardware/linkup-l1110.h
@@ -0,0 +1,48 @@
+/*
+*
+* Definitions for H3600 Handheld Computer
+*
+* Copyright 2001 Compaq Computer Corporation.
+*
+* Use consistent with the GNU GPL is permitted,
+* provided that this copyright notice is
+* preserved in its entirety in all copies and derived works.
+*
+* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+* FITNESS FOR ANY PARTICULAR PURPOSE.
+*
+* Author: Jamey Hicks.
+*
+*/
+
+/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
+
+/* PC Card Status Register */
+#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
+#define LINKUP_PRS_S2	(1 << 1)
+#define LINKUP_PRS_S3	(1 << 2)
+#define LINKUP_PRS_S4	(1 << 3)
+#define LINKUP_PRS_BVD1	(1 << 4)
+#define LINKUP_PRS_BVD2	(1 << 5)
+#define LINKUP_PRS_VS1	(1 << 6)
+#define LINKUP_PRS_VS2	(1 << 7)
+#define LINKUP_PRS_RDY	(1 << 8)
+#define LINKUP_PRS_CD1	(1 << 9)
+#define LINKUP_PRS_CD2	(1 << 10)
+
+/* PC Card Command Register */
+#define LINKUP_PRC_S1	(1 << 0)
+#define LINKUP_PRC_S2	(1 << 1)
+#define LINKUP_PRC_S3	(1 << 2)
+#define LINKUP_PRC_S4	(1 << 3)
+#define LINKUP_PRC_RESET (1 << 4)
+#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
+#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
+#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
+#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
+#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
+
+struct linkup_l1110 {
+	volatile short prc;
+};
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
new file mode 100644
index 00000000000..954b1be991b
--- /dev/null
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/include/asm/hardware/locomo.h
+ *
+ * This file contains the definitions for the LoCoMo G/A Chip
+ *
+ * (C) Copyright 2004 John Lenz
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on sa1111.h
+ */
+#ifndef _ASM_ARCH_LOCOMO
+#define _ASM_ARCH_LOCOMO
+
+#define locomo_writel(val,addr)	({ *(volatile u16 *)(addr) = (val); })
+#define locomo_readl(addr)	(*(volatile u16 *)(addr))
+
+/* LOCOMO version */
+#define LOCOMO_VER	0x00
+
+/* Pin status */
+#define LOCOMO_ST	0x04
+
+/* Pin status */
+#define LOCOMO_C32K	0x08
+
+/* Interrupt controller */
+#define LOCOMO_ICR	0x0C
+
+/* MCS decoder for boot selecting */
+#define LOCOMO_MCSX0	0x10
+#define LOCOMO_MCSX1	0x14
+#define LOCOMO_MCSX2	0x18
+#define LOCOMO_MCSX3	0x1c
+
+/* Touch panel controller */
+#define LOCOMO_ASD	0x20		/* AD start delay */
+#define LOCOMO_HSD	0x28		/* HSYS delay */
+#define LOCOMO_HSC	0x2c		/* HSYS period */
+#define LOCOMO_TADC	0x30		/* tablet ADC clock */
+
+
+/* Long time timer */
+#define LOCOMO_LTC	0xd8		/* LTC interrupt setting */
+#define LOCOMO_LTINT	0xdc		/* LTC interrupt */
+
+/* DAC control signal for LCD (COMADJ ) */
+#define LOCOMO_DAC		0xe0
+/* DAC control */
+#define	LOCOMO_DAC_SCLOEB	0x08	/* SCL pin output data       */
+#define	LOCOMO_DAC_TEST		0x04	/* Test bit                  */
+#define	LOCOMO_DAC_SDA		0x02	/* SDA pin level (read-only) */
+#define	LOCOMO_DAC_SDAOEB	0x01	/* SDA pin output data       */
+
+/* SPI interface */
+#define LOCOMO_SPI	0x60
+#define LOCOMO_SPIMD	0x00		/* SPI mode setting */
+#define LOCOMO_SPICT	0x04		/* SPI mode control */
+#define LOCOMO_SPIST	0x08		/* SPI status */
+#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
+#define	LOCOMO_SPI_REND	(1 << 2)	/* Receive end bit */
+#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
+#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */
+
+#define LOCOMO_SPIIS	0x10		/* SPI interrupt status */
+#define LOCOMO_SPIWE	0x14		/* SPI interrupt status write enable */
+#define LOCOMO_SPIIE	0x18		/* SPI interrupt enable */
+#define LOCOMO_SPIIR	0x1c		/* SPI interrupt request */
+#define LOCOMO_SPITD	0x20		/* SPI transfer data write */
+#define LOCOMO_SPIRD	0x24		/* SPI receive data read */
+#define LOCOMO_SPITS	0x28		/* SPI transfer data shift */
+#define LOCOMO_SPIRS	0x2C		/* SPI receive data shift */
+
+/* GPIO */
+#define LOCOMO_GPD		0x90	/* GPIO direction */
+#define LOCOMO_GPE		0x94	/* GPIO input enable */
+#define LOCOMO_GPL		0x98	/* GPIO level */
+#define LOCOMO_GPO		0x9c	/* GPIO out data setting */
+#define LOCOMO_GRIE		0xa0	/* GPIO rise detection */
+#define LOCOMO_GFIE		0xa4	/* GPIO fall detection */
+#define LOCOMO_GIS		0xa8	/* GPIO edge detection status */
+#define LOCOMO_GWE		0xac	/* GPIO status write enable */
+#define LOCOMO_GIE		0xb0	/* GPIO interrupt enable */
+#define LOCOMO_GIR		0xb4	/* GPIO interrupt request */
+#define	LOCOMO_GPIO(Nb)		(0x01 << (Nb))
+#define LOCOMO_GPIO_RTS		LOCOMO_GPIO(0)
+#define LOCOMO_GPIO_CTS		LOCOMO_GPIO(1)
+#define LOCOMO_GPIO_DSR		LOCOMO_GPIO(2)
+#define LOCOMO_GPIO_DTR		LOCOMO_GPIO(3)
+#define LOCOMO_GPIO_LCD_VSHA_ON	LOCOMO_GPIO(4)
+#define LOCOMO_GPIO_LCD_VSHD_ON	LOCOMO_GPIO(5)
+#define LOCOMO_GPIO_LCD_VEE_ON	LOCOMO_GPIO(6)
+#define LOCOMO_GPIO_LCD_MOD	LOCOMO_GPIO(7)
+#define LOCOMO_GPIO_DAC_ON	LOCOMO_GPIO(8)
+#define LOCOMO_GPIO_FL_VR	LOCOMO_GPIO(9)
+#define LOCOMO_GPIO_DAC_SDATA	LOCOMO_GPIO(10)
+#define LOCOMO_GPIO_DAC_SCK	LOCOMO_GPIO(11)
+#define LOCOMO_GPIO_DAC_SLOAD	LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT  LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER  LOCOMO_GPIO(15)
+
+/* Start the definitions of the devices.  Each device has an initial
+ * base address and a series of offsets from that base address. */
+
+/* Keyboard controller */
+#define LOCOMO_KEYBOARD		0x40
+#define LOCOMO_KIB		0x00	/* KIB level */
+#define LOCOMO_KSC		0x04	/* KSTRB control */
+#define LOCOMO_KCMD		0x08	/* KSTRB command */
+#define LOCOMO_KIC		0x0c	/* Key interrupt */
+
+/* Front light adjustment controller */
+#define LOCOMO_FRONTLIGHT	0xc8
+#define LOCOMO_ALS		0x00	/* Adjust light cycle */
+#define LOCOMO_ALD		0x04	/* Adjust light duty */
+
+#define LOCOMO_ALC_EN		0x8000
+
+/* Backlight controller: TFT signal */
+#define LOCOMO_BACKLIGHT	0x38
+#define LOCOMO_TC		0x00		/* TFT control signal */
+#define LOCOMO_CPSD		0x04		/* CPS delay */
+
+/* Audio controller */
+#define LOCOMO_AUDIO		0x54
+#define LOCOMO_ACC		0x00	/* Audio clock */
+#define LOCOMO_PAIF		0xD0	/* PCM audio interface */
+/* Audio clock */
+#define	LOCOMO_ACC_XON		0x80
+#define	LOCOMO_ACC_XEN		0x40
+#define	LOCOMO_ACC_XSEL0	0x00
+#define	LOCOMO_ACC_XSEL1	0x20
+#define	LOCOMO_ACC_MCLKEN	0x10
+#define	LOCOMO_ACC_64FSEN	0x08
+#define	LOCOMO_ACC_CLKSEL000	0x00	/* mclk  2 */
+#define	LOCOMO_ACC_CLKSEL001	0x01	/* mclk  3 */
+#define	LOCOMO_ACC_CLKSEL010	0x02	/* mclk  4 */
+#define	LOCOMO_ACC_CLKSEL011	0x03	/* mclk  6 */
+#define	LOCOMO_ACC_CLKSEL100	0x04	/* mclk  8 */
+#define	LOCOMO_ACC_CLKSEL101	0x05	/* mclk 12 */
+/* PCM audio interface */
+#define	LOCOMO_PAIF_SCINV	0x20
+#define	LOCOMO_PAIF_SCEN	0x10
+#define	LOCOMO_PAIF_LRCRST	0x08
+#define	LOCOMO_PAIF_LRCEVE	0x04
+#define	LOCOMO_PAIF_LRCINV	0x02
+#define	LOCOMO_PAIF_LRCEN	0x01
+
+/* LED controller */
+#define LOCOMO_LED		0xe8
+#define LOCOMO_LPT0		0x00
+#define LOCOMO_LPT1		0x04
+/* LED control */
+#define LOCOMO_LPT_TOFH		0x80
+#define LOCOMO_LPT_TOFL		0x08
+#define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
+#define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
+
+extern struct bus_type locomo_bus_type;
+
+#define LOCOMO_DEVID_KEYBOARD	0
+#define LOCOMO_DEVID_FRONTLIGHT	1
+#define LOCOMO_DEVID_BACKLIGHT	2
+#define LOCOMO_DEVID_AUDIO	3
+#define LOCOMO_DEVID_LED	4
+#define LOCOMO_DEVID_UART	5
+#define LOCOMO_DEVID_SPI	6
+
+struct locomo_dev {
+	struct device	dev;
+	unsigned int	devid;
+	unsigned int	irq[1];
+
+	void		*mapbase;
+	unsigned long	length;
+
+	u64		dma_mask;
+};
+
+#define LOCOMO_DEV(_d)	container_of((_d), struct locomo_dev, dev)
+
+#define locomo_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define locomo_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
+
+struct locomo_driver {
+	struct device_driver	drv;
+	unsigned int		devid;
+	int (*probe)(struct locomo_dev *);
+	int (*remove)(struct locomo_dev *);
+	int (*suspend)(struct locomo_dev *, pm_message_t);
+	int (*resume)(struct locomo_dev *);
+};
+
+#define LOCOMO_DRV(_d)	container_of((_d), struct locomo_driver, drv)
+
+#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
+
+void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
+
+int locomo_driver_register(struct locomo_driver *);
+void locomo_driver_unregister(struct locomo_driver *);
+
+/* GPIO control functions */
+void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir);
+int locomo_gpio_read_level(struct device *dev, unsigned int bits);
+int locomo_gpio_read_output(struct device *dev, unsigned int bits);
+void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
+
+/* M62332 control function */
+void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
+
+/* Frontlight control */
+void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h
new file mode 100644
index 00000000000..42ba7c167d1
--- /dev/null
+++ b/arch/arm/include/asm/hardware/memc.h
@@ -0,0 +1,26 @@
+/*
+ *  arch/arm/include/asm/hardware/memc.h
+ *
+ *  Copyright (C) Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VDMA_ALIGNMENT	PAGE_SIZE
+#define VDMA_XFERSIZE	16
+#define VDMA_INIT	0
+#define VDMA_START	1
+#define VDMA_END	2
+
+#ifndef __ASSEMBLY__
+extern void memc_write(unsigned int reg, unsigned long val);
+
+#define video_set_dma(start,end,offset)				\
+do {								\
+	memc_write (VDMA_START, (start >> 2));			\
+	memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);	\
+	memc_write (VDMA_INIT, (offset >> 2));			\
+} while (0)
+
+#endif
diff --git a/arch/arm/include/asm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h
new file mode 100644
index 00000000000..2811c7e2cfd
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pci_v3.h
@@ -0,0 +1,186 @@
+/*
+ *  arch/arm/include/asm/hardware/pci_v3.h
+ *
+ *  Internal header file PCI V3 chip
+ *
+ *  Copyright (C) ARM Limited
+ *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef ASM_ARM_HARDWARE_PCI_V3_H
+#define ASM_ARM_HARDWARE_PCI_V3_H
+
+/* -------------------------------------------------------------------------------
+ *  V3 Local Bus to PCI Bridge definitions
+ * -------------------------------------------------------------------------------
+ *  Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
+ *  All V3 register names are prefaced by V3_ to avoid clashing with any other
+ *  PCI definitions.  Their names match the user's manual.
+ * 
+ *  I'm assuming that I20 is disabled.
+ * 
+ */
+#define V3_PCI_VENDOR                   0x00000000
+#define V3_PCI_DEVICE                   0x00000002
+#define V3_PCI_CMD                      0x00000004
+#define V3_PCI_STAT                     0x00000006
+#define V3_PCI_CC_REV                   0x00000008
+#define V3_PCI_HDR_CFG                  0x0000000C
+#define V3_PCI_IO_BASE                  0x00000010
+#define V3_PCI_BASE0                    0x00000014
+#define V3_PCI_BASE1                    0x00000018
+#define V3_PCI_SUB_VENDOR               0x0000002C
+#define V3_PCI_SUB_ID                   0x0000002E
+#define V3_PCI_ROM                      0x00000030
+#define V3_PCI_BPARAM                   0x0000003C
+#define V3_PCI_MAP0                     0x00000040
+#define V3_PCI_MAP1                     0x00000044
+#define V3_PCI_INT_STAT                 0x00000048
+#define V3_PCI_INT_CFG                  0x0000004C 
+#define V3_LB_BASE0                     0x00000054
+#define V3_LB_BASE1                     0x00000058
+#define V3_LB_MAP0                      0x0000005E
+#define V3_LB_MAP1                      0x00000062
+#define V3_LB_BASE2                     0x00000064
+#define V3_LB_MAP2                      0x00000066
+#define V3_LB_SIZE                      0x00000068
+#define V3_LB_IO_BASE                   0x0000006E
+#define V3_FIFO_CFG                     0x00000070
+#define V3_FIFO_PRIORITY                0x00000072
+#define V3_FIFO_STAT                    0x00000074
+#define V3_LB_ISTAT                     0x00000076
+#define V3_LB_IMASK                     0x00000077
+#define V3_SYSTEM                       0x00000078
+#define V3_LB_CFG                       0x0000007A
+#define V3_PCI_CFG                      0x0000007C
+#define V3_DMA_PCI_ADR0                 0x00000080
+#define V3_DMA_PCI_ADR1                 0x00000090
+#define V3_DMA_LOCAL_ADR0               0x00000084
+#define V3_DMA_LOCAL_ADR1               0x00000094
+#define V3_DMA_LENGTH0                  0x00000088
+#define V3_DMA_LENGTH1                  0x00000098
+#define V3_DMA_CSR0                     0x0000008B
+#define V3_DMA_CSR1                     0x0000009B
+#define V3_DMA_CTLB_ADR0                0x0000008C
+#define V3_DMA_CTLB_ADR1                0x0000009C
+#define V3_DMA_DELAY                    0x000000E0
+#define V3_MAIL_DATA                    0x000000C0
+#define V3_PCI_MAIL_IEWR                0x000000D0
+#define V3_PCI_MAIL_IERD                0x000000D2
+#define V3_LB_MAIL_IEWR                 0x000000D4
+#define V3_LB_MAIL_IERD                 0x000000D6
+#define V3_MAIL_WR_STAT                 0x000000D8
+#define V3_MAIL_RD_STAT                 0x000000DA
+#define V3_QBA_MAP                      0x000000DC
+
+/*  PCI COMMAND REGISTER bits
+ */
+#define V3_COMMAND_M_FBB_EN             (1 << 9)
+#define V3_COMMAND_M_SERR_EN            (1 << 8)
+#define V3_COMMAND_M_PAR_EN             (1 << 6)
+#define V3_COMMAND_M_MASTER_EN          (1 << 2)
+#define V3_COMMAND_M_MEM_EN             (1 << 1)
+#define V3_COMMAND_M_IO_EN              (1 << 0)
+
+/*  SYSTEM REGISTER bits
+ */
+#define V3_SYSTEM_M_RST_OUT             (1 << 15)
+#define V3_SYSTEM_M_LOCK                (1 << 14)
+
+/*  PCI_CFG bits
+ */
+#define V3_PCI_CFG_M_I2O_EN		(1 << 15)
+#define V3_PCI_CFG_M_IO_REG_DIS		(1 << 14)
+#define V3_PCI_CFG_M_IO_DIS		(1 << 13)
+#define V3_PCI_CFG_M_EN3V		(1 << 12)
+#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
+#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
+#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
+
+/*  PCI_BASE register bits (PCI -> Local Bus)
+ */
+#define V3_PCI_BASE_M_ADR_BASE          0xFFF00000
+#define V3_PCI_BASE_M_ADR_BASEL         0x000FFF00
+#define V3_PCI_BASE_M_PREFETCH          (1 << 3)
+#define V3_PCI_BASE_M_TYPE              (3 << 1)
+#define V3_PCI_BASE_M_IO                (1 << 0)
+
+/*  PCI MAP register bits (PCI -> Local bus)
+ */
+#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
+#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
+#define V3_PCI_MAP_M_ROM_SIZE           (3 << 10)
+#define V3_PCI_MAP_M_SWAP               (3 << 8)
+#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
+#define V3_PCI_MAP_M_REG_EN             (1 << 1)
+#define V3_PCI_MAP_M_ENABLE             (1 << 0)
+
+/*
+ *  LB_BASE0,1 register bits (Local bus -> PCI)
+ */
+#define V3_LB_BASE_ADR_BASE		0xfff00000
+#define V3_LB_BASE_SWAP			(3 << 8)
+#define V3_LB_BASE_ADR_SIZE		(15 << 4)
+#define V3_LB_BASE_PREFETCH		(1 << 3)
+#define V3_LB_BASE_ENABLE		(1 << 0)
+
+#define V3_LB_BASE_ADR_SIZE_1MB		(0 << 4)
+#define V3_LB_BASE_ADR_SIZE_2MB		(1 << 4)
+#define V3_LB_BASE_ADR_SIZE_4MB		(2 << 4)
+#define V3_LB_BASE_ADR_SIZE_8MB		(3 << 4)
+#define V3_LB_BASE_ADR_SIZE_16MB	(4 << 4)
+#define V3_LB_BASE_ADR_SIZE_32MB	(5 << 4)
+#define V3_LB_BASE_ADR_SIZE_64MB	(6 << 4)
+#define V3_LB_BASE_ADR_SIZE_128MB	(7 << 4)
+#define V3_LB_BASE_ADR_SIZE_256MB	(8 << 4)
+#define V3_LB_BASE_ADR_SIZE_512MB	(9 << 4)
+#define V3_LB_BASE_ADR_SIZE_1GB		(10 << 4)
+#define V3_LB_BASE_ADR_SIZE_2GB		(11 << 4)
+
+#define v3_addr_to_lb_base(a)	((a) & V3_LB_BASE_ADR_BASE)
+
+/*
+ *  LB_MAP0,1 register bits (Local bus -> PCI)
+ */
+#define V3_LB_MAP_MAP_ADR		0xfff0
+#define V3_LB_MAP_TYPE			(7 << 1)
+#define V3_LB_MAP_AD_LOW_EN		(1 << 0)
+
+#define V3_LB_MAP_TYPE_IACK		(0 << 1)
+#define V3_LB_MAP_TYPE_IO		(1 << 1)
+#define V3_LB_MAP_TYPE_MEM		(3 << 1)
+#define V3_LB_MAP_TYPE_CONFIG		(5 << 1)
+#define V3_LB_MAP_TYPE_MEM_MULTIPLE	(6 << 1)
+
+#define v3_addr_to_lb_map(a)	(((a) >> 16) & V3_LB_MAP_MAP_ADR)
+
+/*
+ *  LB_BASE2 register bits (Local bus -> PCI IO)
+ */
+#define V3_LB_BASE2_ADR_BASE		0xff00
+#define V3_LB_BASE2_SWAP		(3 << 6)
+#define V3_LB_BASE2_ENABLE		(1 << 0)
+
+#define v3_addr_to_lb_base2(a)	(((a) >> 16) & V3_LB_BASE2_ADR_BASE)
+
+/*
+ *  LB_MAP2 register bits (Local bus -> PCI IO)
+ */
+#define V3_LB_MAP2_MAP_ADR		0xff00
+
+#define v3_addr_to_lb_map2(a)	(((a) >> 16) & V3_LB_MAP2_MAP_ADR)
+
+#endif
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
new file mode 100644
index 00000000000..5da2595759e
--- /dev/null
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -0,0 +1,581 @@
+/*
+ * arch/arm/include/asm/hardware/sa1111.h
+ *
+ * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
+ *
+ * This file contains definitions for the SA-1111 Companion Chip.
+ * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.)
+ *
+ * Macro that calculates real address for registers in the SA-1111
+ */
+
+#ifndef _ASM_ARCH_SA1111
+#define _ASM_ARCH_SA1111
+
+#include <mach/bitfield.h>
+
+/*
+ * The SA1111 is always located at virtual 0xf4000000, and is always
+ * "native" endian.
+ */
+
+#define SA1111_VBASE		0xf4000000
+
+/* Don't use these! */
+#define SA1111_p2v( x )         ((x) - SA1111_BASE + SA1111_VBASE)
+#define SA1111_v2p( x )         ((x) - SA1111_VBASE + SA1111_BASE)
+
+#ifndef __ASSEMBLY__
+#define _SA1111(x)	((x) + sa1111->resource.start)
+#endif
+
+#define sa1111_writel(val,addr)	__raw_writel(val, addr)
+#define sa1111_readl(addr)	__raw_readl(addr)
+
+/*
+ * 26 bits of the SA-1110 address bus are available to the SA-1111.
+ * Use these when feeding target addresses to the DMA engines.
+ */
+
+#define SA1111_ADDR_WIDTH	(26)
+#define SA1111_ADDR_MASK	((1<<SA1111_ADDR_WIDTH)-1)
+#define SA1111_DMA_ADDR(x)	((x)&SA1111_ADDR_MASK)
+
+/*
+ * Don't ask the (SAC) DMA engines to move less than this amount.
+ */
+
+#define SA1111_SAC_DMA_MIN_XFER	(0x800)
+
+/*
+ * System Bus Interface (SBI)
+ *
+ * Registers
+ *    SKCR	Control Register
+ *    SMCR	Shared Memory Controller Register
+ *    SKID	ID Register
+ */
+#define SA1111_SKCR	0x0000
+#define SA1111_SMCR	0x0004
+#define SA1111_SKID	0x0008
+
+#define SKCR_PLL_BYPASS	(1<<0)
+#define SKCR_RCLKEN	(1<<1)
+#define SKCR_SLEEP	(1<<2)
+#define SKCR_DOZE	(1<<3)
+#define SKCR_VCO_OFF	(1<<4)
+#define SKCR_SCANTSTEN	(1<<5)
+#define SKCR_CLKTSTEN	(1<<6)
+#define SKCR_RDYEN	(1<<7)
+#define SKCR_SELAC	(1<<8)
+#define SKCR_OPPC	(1<<9)
+#define SKCR_PLLTSTEN	(1<<10)
+#define SKCR_USBIOTSTEN	(1<<11)
+/*
+ * Don't believe the specs!  Take them, throw them outside.  Leave them
+ * there for a week.  Spit on them.  Walk on them.  Stamp on them.
+ * Pour gasoline over them and finally burn them.  Now think about coding.
+ *  - The October 1999 errata (278260-007) says its bit 13, 1 to enable.
+ *  - The Feb 2001 errata (278260-010) says that the previous errata
+ *    (278260-009) is wrong, and its bit actually 12, fixed in spec
+ *    278242-003.
+ *  - The SA1111 manual (278242) says bit 12, but 0 to enable.
+ *  - Reality is bit 13, 1 to enable.
+ *      -- rmk
+ */
+#define SKCR_OE_EN	(1<<13)
+
+#define SMCR_DTIM	(1<<0)
+#define SMCR_MBGE	(1<<1)
+#define SMCR_DRAC_0	(1<<2)
+#define SMCR_DRAC_1	(1<<3)
+#define SMCR_DRAC_2	(1<<4)
+#define SMCR_DRAC	Fld(3, 2)
+#define SMCR_CLAT	(1<<5)
+
+#define SKID_SIREV_MASK	(0x000000f0)
+#define SKID_MTREV_MASK (0x0000000f)
+#define SKID_ID_MASK	(0xffffff00)
+#define SKID_SA1111_ID	(0x690cc200)
+
+/*
+ * System Controller
+ *
+ * Registers
+ *    SKPCR	Power Control Register
+ *    SKCDR	Clock Divider Register
+ *    SKAUD	Audio Clock Divider Register
+ *    SKPMC	PS/2 Mouse Clock Divider Register
+ *    SKPTC	PS/2 Track Pad Clock Divider Register
+ *    SKPEN0	PWM0 Enable Register
+ *    SKPWM0	PWM0 Clock Register
+ *    SKPEN1	PWM1 Enable Register
+ *    SKPWM1	PWM1 Clock Register
+ */
+#define SA1111_SKPCR	0x0200
+#define SA1111_SKCDR	0x0204
+#define SA1111_SKAUD	0x0208
+#define SA1111_SKPMC	0x020c
+#define SA1111_SKPTC	0x0210
+#define SA1111_SKPEN0	0x0214
+#define SA1111_SKPWM0	0x0218
+#define SA1111_SKPEN1	0x021c
+#define SA1111_SKPWM1	0x0220
+
+#define SKPCR_UCLKEN	(1<<0)
+#define SKPCR_ACCLKEN	(1<<1)
+#define SKPCR_I2SCLKEN	(1<<2)
+#define SKPCR_L3CLKEN	(1<<3)
+#define SKPCR_SCLKEN	(1<<4)
+#define SKPCR_PMCLKEN	(1<<5)
+#define SKPCR_PTCLKEN	(1<<6)
+#define SKPCR_DCLKEN	(1<<7)
+#define SKPCR_PWMCLKEN	(1<<8)
+
+/*
+ * USB Host controller
+ */
+#define SA1111_USB		0x0400
+
+/*
+ * Offsets from SA1111_USB_BASE
+ */
+#define SA1111_USB_STATUS	0x0118
+#define SA1111_USB_RESET	0x011c
+#define SA1111_USB_IRQTEST	0x0120
+
+#define USB_RESET_FORCEIFRESET	(1 << 0)
+#define USB_RESET_FORCEHCRESET	(1 << 1)
+#define USB_RESET_CLKGENRESET	(1 << 2)
+#define USB_RESET_SIMSCALEDOWN	(1 << 3)
+#define USB_RESET_USBINTTEST	(1 << 4)
+#define USB_RESET_SLEEPSTBYEN	(1 << 5)
+#define USB_RESET_PWRSENSELOW	(1 << 6)
+#define USB_RESET_PWRCTRLLOW	(1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
+#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
+#define USB_STATUS_NIRQHCIM       (1 <<  9)
+#define USB_STATUS_NHCIMFCLR      (1 << 10)
+#define USB_STATUS_USBPWRSENSE    (1 << 11)
+
+/*
+ * Serial Audio Controller
+ *
+ * Registers
+ *    SACR0             Serial Audio Common Control Register
+ *    SACR1             Serial Audio Alternate Mode (I2C/MSB) Control Register
+ *    SACR2             Serial Audio AC-link Control Register
+ *    SASR0             Serial Audio I2S/MSB Interface & FIFO Status Register
+ *    SASR1             Serial Audio AC-link Interface & FIFO Status Register
+ *    SASCR             Serial Audio Status Clear Register
+ *    L3_CAR            L3 Control Bus Address Register
+ *    L3_CDR            L3 Control Bus Data Register
+ *    ACCAR             AC-link Command Address Register
+ *    ACCDR             AC-link Command Data Register
+ *    ACSAR             AC-link Status Address Register
+ *    ACSDR             AC-link Status Data Register
+ *    SADTCS            Serial Audio DMA Transmit Control/Status Register
+ *    SADTSA            Serial Audio DMA Transmit Buffer Start Address A
+ *    SADTCA            Serial Audio DMA Transmit Buffer Count Register A
+ *    SADTSB            Serial Audio DMA Transmit Buffer Start Address B
+ *    SADTCB            Serial Audio DMA Transmit Buffer Count Register B
+ *    SADRCS            Serial Audio DMA Receive Control/Status Register
+ *    SADRSA            Serial Audio DMA Receive Buffer Start Address A
+ *    SADRCA            Serial Audio DMA Receive Buffer Count Register A
+ *    SADRSB            Serial Audio DMA Receive Buffer Start Address B
+ *    SADRCB            Serial Audio DMA Receive Buffer Count Register B
+ *    SAITR             Serial Audio Interrupt Test Register
+ *    SADR              Serial Audio Data Register (16 x 32-bit)
+ */
+
+#define SA1111_SERAUDIO		0x0600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_SACR0		0x00
+#define SA1111_SACR1		0x04
+#define SA1111_SACR2		0x08
+#define SA1111_SASR0		0x0c
+#define SA1111_SASR1		0x10
+#define SA1111_SASCR		0x18
+#define SA1111_L3_CAR		0x1c
+#define SA1111_L3_CDR		0x20
+#define SA1111_ACCAR		0x24
+#define SA1111_ACCDR		0x28
+#define SA1111_ACSAR		0x2c
+#define SA1111_ACSDR		0x30
+#define SA1111_SADTCS		0x34
+#define SA1111_SADTSA		0x38
+#define SA1111_SADTCA		0x3c
+#define SA1111_SADTSB		0x40
+#define SA1111_SADTCB		0x44
+#define SA1111_SADRCS		0x48
+#define SA1111_SADRSA		0x4c
+#define SA1111_SADRCA		0x50
+#define SA1111_SADRSB		0x54
+#define SA1111_SADRCB		0x58
+#define SA1111_SAITR		0x5c
+#define SA1111_SADR		0x80
+
+#ifndef CONFIG_ARCH_PXA
+
+#define SACR0_ENB	(1<<0)
+#define SACR0_BCKD	(1<<2)
+#define SACR0_RST	(1<<3)
+
+#define SACR1_AMSL	(1<<0)
+#define SACR1_L3EN	(1<<1)
+#define SACR1_L3MB	(1<<2)
+#define SACR1_DREC	(1<<3)
+#define SACR1_DRPL	(1<<4)
+#define SACR1_ENLBF	(1<<5)
+
+#define SACR2_TS3V	(1<<0)
+#define SACR2_TS4V	(1<<1)
+#define SACR2_WKUP	(1<<2)
+#define SACR2_DREC	(1<<3)
+#define SACR2_DRPL	(1<<4)
+#define SACR2_ENLBF	(1<<5)
+#define SACR2_RESET	(1<<6)
+
+#define SASR0_TNF	(1<<0)
+#define SASR0_RNE	(1<<1)
+#define SASR0_BSY	(1<<2)
+#define SASR0_TFS	(1<<3)
+#define SASR0_RFS	(1<<4)
+#define SASR0_TUR	(1<<5)
+#define SASR0_ROR	(1<<6)
+#define SASR0_L3WD	(1<<16)
+#define SASR0_L3RD	(1<<17)
+
+#define SASR1_TNF	(1<<0)
+#define SASR1_RNE	(1<<1)
+#define SASR1_BSY	(1<<2)
+#define SASR1_TFS	(1<<3)
+#define SASR1_RFS	(1<<4)
+#define SASR1_TUR	(1<<5)
+#define SASR1_ROR	(1<<6)
+#define SASR1_CADT	(1<<16)
+#define SASR1_SADR	(1<<17)
+#define SASR1_RSTO	(1<<18)
+#define SASR1_CLPM	(1<<19)
+#define SASR1_CRDY	(1<<20)
+#define SASR1_RS3V	(1<<21)
+#define SASR1_RS4V	(1<<22)
+
+#define SASCR_TUR	(1<<5)
+#define SASCR_ROR	(1<<6)
+#define SASCR_DTS	(1<<16)
+#define SASCR_RDD	(1<<17)
+#define SASCR_STO	(1<<18)
+
+#define SADTCS_TDEN	(1<<0)
+#define SADTCS_TDIE	(1<<1)
+#define SADTCS_TDBDA	(1<<3)
+#define SADTCS_TDSTA	(1<<4)
+#define SADTCS_TDBDB	(1<<5)
+#define SADTCS_TDSTB	(1<<6)
+#define SADTCS_TBIU	(1<<7)
+
+#define SADRCS_RDEN	(1<<0)
+#define SADRCS_RDIE	(1<<1)
+#define SADRCS_RDBDA	(1<<3)
+#define SADRCS_RDSTA	(1<<4)
+#define SADRCS_RDBDB	(1<<5)
+#define SADRCS_RDSTB	(1<<6)
+#define SADRCS_RBIU	(1<<7)
+
+#define SAD_CS_DEN	(1<<0)
+#define SAD_CS_DIE	(1<<1)	/* Not functional on metal 1 */
+#define SAD_CS_DBDA	(1<<3)	/* Not functional on metal 1 */
+#define SAD_CS_DSTA	(1<<4)
+#define SAD_CS_DBDB	(1<<5)	/* Not functional on metal 1 */
+#define SAD_CS_DSTB	(1<<6)
+#define SAD_CS_BIU	(1<<7)	/* Not functional on metal 1 */
+
+#define SAITR_TFS	(1<<0)
+#define SAITR_RFS	(1<<1)
+#define SAITR_TUR	(1<<2)
+#define SAITR_ROR	(1<<3)
+#define SAITR_CADT	(1<<4)
+#define SAITR_SADR	(1<<5)
+#define SAITR_RSTO	(1<<6)
+#define SAITR_TDBDA	(1<<8)
+#define SAITR_TDBDB	(1<<9)
+#define SAITR_RDBDA	(1<<10)
+#define SAITR_RDBDB	(1<<11)
+
+#endif  /* !CONFIG_ARCH_PXA */
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ *    PA_DDR		GPIO Block A Data Direction
+ *    PA_DRR/PA_DWR	GPIO Block A Data Value Register (read/write)
+ *    PA_SDR		GPIO Block A Sleep Direction
+ *    PA_SSR		GPIO Block A Sleep State
+ *    PB_DDR		GPIO Block B Data Direction
+ *    PB_DRR/PB_DWR	GPIO Block B Data Value Register (read/write)
+ *    PB_SDR		GPIO Block B Sleep Direction
+ *    PB_SSR		GPIO Block B Sleep State
+ *    PC_DDR		GPIO Block C Data Direction
+ *    PC_DRR/PC_DWR	GPIO Block C Data Value Register (read/write)
+ *    PC_SDR		GPIO Block C Sleep Direction
+ *    PC_SSR		GPIO Block C Sleep State
+ */
+
+#define _PA_DDR		_SA1111( 0x1000 )
+#define _PA_DRR		_SA1111( 0x1004 )
+#define _PA_DWR		_SA1111( 0x1004 )
+#define _PA_SDR		_SA1111( 0x1008 )
+#define _PA_SSR		_SA1111( 0x100c )
+#define _PB_DDR		_SA1111( 0x1010 )
+#define _PB_DRR		_SA1111( 0x1014 )
+#define _PB_DWR		_SA1111( 0x1014 )
+#define _PB_SDR		_SA1111( 0x1018 )
+#define _PB_SSR		_SA1111( 0x101c )
+#define _PC_DDR		_SA1111( 0x1020 )
+#define _PC_DRR		_SA1111( 0x1024 )
+#define _PC_DWR		_SA1111( 0x1024 )
+#define _PC_SDR		_SA1111( 0x1028 )
+#define _PC_SSR		_SA1111( 0x102c )
+
+#define SA1111_GPIO	0x1000
+
+#define SA1111_GPIO_PADDR	(0x000)
+#define SA1111_GPIO_PADRR	(0x004)
+#define SA1111_GPIO_PADWR	(0x004)
+#define SA1111_GPIO_PASDR	(0x008)
+#define SA1111_GPIO_PASSR	(0x00c)
+#define SA1111_GPIO_PBDDR	(0x010)
+#define SA1111_GPIO_PBDRR	(0x014)
+#define SA1111_GPIO_PBDWR	(0x014)
+#define SA1111_GPIO_PBSDR	(0x018)
+#define SA1111_GPIO_PBSSR	(0x01c)
+#define SA1111_GPIO_PCDDR	(0x020)
+#define SA1111_GPIO_PCDRR	(0x024)
+#define SA1111_GPIO_PCDWR	(0x024)
+#define SA1111_GPIO_PCSDR	(0x028)
+#define SA1111_GPIO_PCSSR	(0x02c)
+
+#define GPIO_A0		(1 << 0)
+#define GPIO_A1		(1 << 1)
+#define GPIO_A2		(1 << 2)
+#define GPIO_A3		(1 << 3)
+
+#define GPIO_B0		(1 << 8)
+#define GPIO_B1		(1 << 9)
+#define GPIO_B2		(1 << 10)
+#define GPIO_B3		(1 << 11)
+#define GPIO_B4		(1 << 12)
+#define GPIO_B5		(1 << 13)
+#define GPIO_B6		(1 << 14)
+#define GPIO_B7		(1 << 15)
+
+#define GPIO_C0		(1 << 16)
+#define GPIO_C1		(1 << 17)
+#define GPIO_C2		(1 << 18)
+#define GPIO_C3		(1 << 19)
+#define GPIO_C4		(1 << 20)
+#define GPIO_C5		(1 << 21)
+#define GPIO_C6		(1 << 22)
+#define GPIO_C7		(1 << 23)
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ *    INTTEST0		Test register 0
+ *    INTTEST1		Test register 1
+ *    INTEN0		Interrupt Enable register 0
+ *    INTEN1		Interrupt Enable register 1
+ *    INTPOL0		Interrupt Polarity selection 0
+ *    INTPOL1		Interrupt Polarity selection 1
+ *    INTTSTSEL		Interrupt source selection
+ *    INTSTATCLR0	Interrupt Status/Clear 0
+ *    INTSTATCLR1	Interrupt Status/Clear 1
+ *    INTSET0		Interrupt source set 0
+ *    INTSET1		Interrupt source set 1
+ *    WAKE_EN0		Wake-up source enable 0
+ *    WAKE_EN1		Wake-up source enable 1
+ *    WAKE_POL0		Wake-up polarity selection 0
+ *    WAKE_POL1		Wake-up polarity selection 1
+ */
+#define SA1111_INTC		0x1600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_INTTEST0		0x0000
+#define SA1111_INTTEST1		0x0004
+#define SA1111_INTEN0		0x0008
+#define SA1111_INTEN1		0x000c
+#define SA1111_INTPOL0		0x0010
+#define SA1111_INTPOL1		0x0014
+#define SA1111_INTTSTSEL	0x0018
+#define SA1111_INTSTATCLR0	0x001c
+#define SA1111_INTSTATCLR1	0x0020
+#define SA1111_INTSET0		0x0024
+#define SA1111_INTSET1		0x0028
+#define SA1111_WAKEEN0		0x002c
+#define SA1111_WAKEEN1		0x0030
+#define SA1111_WAKEPOL0		0x0034
+#define SA1111_WAKEPOL1		0x0038
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers
+ *    PS2CR		Control Register
+ *    PS2STAT		Status Register
+ *    PS2DATA		Transmit/Receive Data register
+ *    PS2CLKDIV		Clock Division Register
+ *    PS2PRECNT		Clock Precount Register
+ *    PS2TEST1		Test register 1
+ *    PS2TEST2		Test register 2
+ *    PS2TEST3		Test register 3
+ *    PS2TEST4		Test register 4
+ */
+
+#define SA1111_KBD		0x0a00
+#define SA1111_MSE		0x0c00
+
+/*
+ * These are offsets from the above bases.
+ */
+#define SA1111_PS2CR		0x0000
+#define SA1111_PS2STAT		0x0004
+#define SA1111_PS2DATA		0x0008
+#define SA1111_PS2CLKDIV	0x000c
+#define SA1111_PS2PRECNT	0x0010
+
+#define PS2CR_ENA		0x08
+#define PS2CR_FKD		0x02
+#define PS2CR_FKC		0x01
+
+#define PS2STAT_STP		0x0100
+#define PS2STAT_TXE		0x0080
+#define PS2STAT_TXB		0x0040
+#define PS2STAT_RXF		0x0020
+#define PS2STAT_RXB		0x0010
+#define PS2STAT_ENA		0x0008
+#define PS2STAT_RXP		0x0004
+#define PS2STAT_KBD		0x0002
+#define PS2STAT_KBC		0x0001
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ *    PCSR	Status Register
+ *    PCCR	Control Register
+ *    PCSSR	Sleep State Register
+ */
+
+#define SA1111_PCMCIA	0x1600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_PCCR	0x0000
+#define SA1111_PCSSR	0x0004
+#define SA1111_PCSR	0x0008
+
+#define PCSR_S0_READY	(1<<0)
+#define PCSR_S1_READY	(1<<1)
+#define PCSR_S0_DETECT	(1<<2)
+#define PCSR_S1_DETECT	(1<<3)
+#define PCSR_S0_VS1	(1<<4)
+#define PCSR_S0_VS2	(1<<5)
+#define PCSR_S1_VS1	(1<<6)
+#define PCSR_S1_VS2	(1<<7)
+#define PCSR_S0_WP	(1<<8)
+#define PCSR_S1_WP	(1<<9)
+#define PCSR_S0_BVD1	(1<<10)
+#define PCSR_S0_BVD2	(1<<11)
+#define PCSR_S1_BVD1	(1<<12)
+#define PCSR_S1_BVD2	(1<<13)
+
+#define PCCR_S0_RST	(1<<0)
+#define PCCR_S1_RST	(1<<1)
+#define PCCR_S0_FLT	(1<<2)
+#define PCCR_S1_FLT	(1<<3)
+#define PCCR_S0_PWAITEN	(1<<4)
+#define PCCR_S1_PWAITEN	(1<<5)
+#define PCCR_S0_PSE	(1<<6)
+#define PCCR_S1_PSE	(1<<7)
+
+#define PCSSR_S0_SLEEP	(1<<0)
+#define PCSSR_S1_SLEEP	(1<<1)
+
+
+
+
+extern struct bus_type sa1111_bus_type;
+
+#define SA1111_DEVID_SBI	0
+#define SA1111_DEVID_SK		1
+#define SA1111_DEVID_USB	2
+#define SA1111_DEVID_SAC	3
+#define SA1111_DEVID_SSP	4
+#define SA1111_DEVID_PS2	5
+#define SA1111_DEVID_GPIO	6
+#define SA1111_DEVID_INT	7
+#define SA1111_DEVID_PCMCIA	8
+
+struct sa1111_dev {
+	struct device	dev;
+	unsigned int	devid;
+	struct resource	res;
+	void __iomem	*mapbase;
+	unsigned int	skpcr_mask;
+	unsigned int	irq[6];
+	u64		dma_mask;
+};
+
+#define SA1111_DEV(_d)	container_of((_d), struct sa1111_dev, dev)
+
+#define sa1111_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define sa1111_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
+
+struct sa1111_driver {
+	struct device_driver	drv;
+	unsigned int		devid;
+	int (*probe)(struct sa1111_dev *);
+	int (*remove)(struct sa1111_dev *);
+	int (*suspend)(struct sa1111_dev *, pm_message_t);
+	int (*resume)(struct sa1111_dev *);
+};
+
+#define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
+
+#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
+
+/*
+ * These frob the SKPCR register.
+ */
+void sa1111_enable_device(struct sa1111_dev *);
+void sa1111_disable_device(struct sa1111_dev *);
+
+unsigned int sa1111_pll_clock(struct sa1111_dev *);
+
+#define SA1111_AUDIO_ACLINK	0
+#define SA1111_AUDIO_I2S	1
+
+void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode);
+int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate);
+int sa1111_get_audio_rate(struct sa1111_dev *sadev);
+
+int sa1111_check_dma_bug(dma_addr_t addr);
+
+int sa1111_driver_register(struct sa1111_driver *);
+void sa1111_driver_unregister(struct sa1111_driver *);
+
+void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir);
+void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
+void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
+
+#endif  /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
new file mode 100644
index 00000000000..dfb8330599f
--- /dev/null
+++ b/arch/arm/include/asm/hardware/scoop.h
@@ -0,0 +1,69 @@
+/*
+ *  Definitions for the SCOOP interface found on various Sharp PDAs
+ *
+ *  Copyright (c) 2004 Richard Purdie
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define SCOOP_MCR  0x00
+#define SCOOP_CDR  0x04
+#define SCOOP_CSR  0x08
+#define SCOOP_CPR  0x0C
+#define SCOOP_CCR  0x10
+#define SCOOP_IRR  0x14
+#define SCOOP_IRM  0x14
+#define SCOOP_IMR  0x18
+#define SCOOP_ISR  0x1C
+#define SCOOP_GPCR 0x20
+#define SCOOP_GPWR 0x24
+#define SCOOP_GPRR 0x28
+
+#define SCOOP_GPCR_PA22	( 1 << 12 )
+#define SCOOP_GPCR_PA21	( 1 << 11 )
+#define SCOOP_GPCR_PA20	( 1 << 10 )
+#define SCOOP_GPCR_PA19	( 1 << 9 )
+#define SCOOP_GPCR_PA18	( 1 << 8 )
+#define SCOOP_GPCR_PA17	( 1 << 7 )
+#define SCOOP_GPCR_PA16	( 1 << 6 )
+#define SCOOP_GPCR_PA15	( 1 << 5 )
+#define SCOOP_GPCR_PA14	( 1 << 4 )
+#define SCOOP_GPCR_PA13	( 1 << 3 )
+#define SCOOP_GPCR_PA12	( 1 << 2 )
+#define SCOOP_GPCR_PA11	( 1 << 1 )
+
+struct scoop_config {
+	unsigned short io_out;
+	unsigned short io_dir;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
+	int gpio_base;
+};
+
+/* Structure for linking scoop devices to PCMCIA sockets */
+struct scoop_pcmcia_dev {
+	struct device *dev;     /* Pointer to this socket's scoop device */
+	int	irq;                /* irq for socket */
+	int cd_irq;
+	const char *cd_irq_str;
+	unsigned char keep_vs;
+	unsigned char keep_rd;
+};
+
+struct scoop_pcmcia_config {
+	struct scoop_pcmcia_dev *devs;
+	int num_devs;
+	void (*pcmcia_init)(void);
+	void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr);
+};
+
+extern struct scoop_pcmcia_config *platform_scoop_config;
+
+void reset_scoop(struct device *dev);
+unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit);
+unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit);
+unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
+void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h
new file mode 100644
index 00000000000..2d00db22b98
--- /dev/null
+++ b/arch/arm/include/asm/hardware/sharpsl_pm.h
@@ -0,0 +1,106 @@
+/*
+ * SharpSL Battery/PM Driver
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/interrupt.h>
+
+struct sharpsl_charger_machinfo {
+	void (*init)(void);
+	void (*exit)(void);
+	int gpio_acin;
+	int gpio_batfull;
+	int batfull_irq;
+	int gpio_batlock;
+	int gpio_fatal;
+	void (*discharge)(int);
+	void (*discharge1)(int);
+	void (*charge)(int);
+	void (*measure_temp)(int);
+	void (*presuspend)(void);
+	void (*postsuspend)(void);
+	void (*earlyresume)(void);
+	unsigned long (*read_devdata)(int);
+#define SHARPSL_BATT_VOLT       1
+#define SHARPSL_BATT_TEMP       2
+#define SHARPSL_ACIN_VOLT       3
+#define SHARPSL_STATUS_ACIN     4
+#define SHARPSL_STATUS_LOCK     5
+#define SHARPSL_STATUS_CHRGFULL 6
+#define SHARPSL_STATUS_FATAL    7
+	unsigned long (*charger_wakeup)(void);
+	int (*should_wakeup)(unsigned int resume_on_alarm);
+	void (*backlight_limit)(int);
+	int (*backlight_get_status) (void);
+	int charge_on_volt;
+	int charge_on_temp;
+	int charge_acin_high;
+	int charge_acin_low;
+	int fatal_acin_volt;
+	int fatal_noacin_volt;
+	int bat_levels;
+	struct battery_thresh *bat_levels_noac;
+	struct battery_thresh *bat_levels_acin;
+	struct battery_thresh *bat_levels_noac_bl;
+	struct battery_thresh *bat_levels_acin_bl;
+	int status_high_acin;
+	int status_low_acin;
+	int status_high_noac;
+	int status_low_noac;
+};
+
+struct battery_thresh {
+	int voltage;
+	int percentage;
+};
+
+struct battery_stat {
+	int ac_status;         /* APM AC Present/Not Present */
+	int mainbat_status;    /* APM Main Battery Status */
+	int mainbat_percent;   /* Main Battery Percentage Charge */
+	int mainbat_voltage;   /* Main Battery Voltage */
+};
+
+struct sharpsl_pm_status {
+	struct device *dev;
+	struct timer_list ac_timer;
+	struct timer_list chrg_full_timer;
+
+	int charge_mode;
+#define CHRG_ERROR    (-1)
+#define CHRG_OFF      (0)
+#define CHRG_ON       (1)
+#define CHRG_DONE     (2)
+
+	unsigned int flags;
+#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
+#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
+#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
+#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
+#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
+
+	int full_count;
+	unsigned long charge_start_time;
+	struct sharpsl_charger_machinfo *machinfo;
+	struct battery_stat battstat;
+};
+
+extern struct sharpsl_pm_status sharpsl_pm;
+
+
+#define SHARPSL_LED_ERROR  2
+#define SHARPSL_LED_ON     1
+#define SHARPSL_LED_OFF    0
+
+void sharpsl_battery_kick(void);
+void sharpsl_pm_led(int val);
+irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
+irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
+irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
+
diff --git a/arch/arm/include/asm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h
new file mode 100644
index 00000000000..3b42e181997
--- /dev/null
+++ b/arch/arm/include/asm/hardware/ssp.h
@@ -0,0 +1,28 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SSP_H
+#define SSP_H
+
+struct ssp_state {
+	unsigned int	cr0;
+	unsigned int	cr1;
+};
+
+int ssp_write_word(u16 data);
+int ssp_read_word(u16 *data);
+int ssp_flush(void);
+void ssp_enable(void);
+void ssp_disable(void);
+void ssp_save_state(struct ssp_state *ssp);
+void ssp_restore_state(struct ssp_state *ssp);
+int ssp_init(void);
+void ssp_exit(void);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h
new file mode 100644
index 00000000000..b442d65c659
--- /dev/null
+++ b/arch/arm/include/asm/hardware/uengine.h
@@ -0,0 +1,62 @@
+/*
+ * Generic library functions for the microengines found on the Intel
+ * IXP2000 series of network processors.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __IXP2000_UENGINE_H
+#define __IXP2000_UENGINE_H
+
+extern u32 ixp2000_uengine_mask;
+
+struct ixp2000_uengine_code
+{
+	u32	cpu_model_bitmask;
+	u8	cpu_min_revision;
+	u8	cpu_max_revision;
+
+	u32	uengine_parameters;
+
+	struct ixp2000_reg_value {
+		int	reg;
+		u32	value;
+	} *initial_reg_values;
+
+	int	num_insns;
+	u8	*insns;
+};
+
+u32 ixp2000_uengine_csr_read(int uengine, int offset);
+void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
+void ixp2000_uengine_reset(u32 uengine_mask);
+void ixp2000_uengine_set_mode(int uengine, u32 mode);
+void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
+void ixp2000_uengine_init_context(int uengine, int context, int pc);
+void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
+void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
+int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
+
+#define IXP2000_UENGINE_8_CONTEXTS		0x00000000
+#define IXP2000_UENGINE_4_CONTEXTS		0x80000000
+#define IXP2000_UENGINE_PRN_UPDATE_EVERY	0x40000000
+#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS	0x00000000
+#define IXP2000_UENGINE_NN_FROM_SELF		0x00100000
+#define IXP2000_UENGINE_NN_FROM_PREVIOUS	0x00000000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3	0x000c0000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2	0x00080000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1	0x00040000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0	0x00000000
+#define IXP2000_UENGINE_LM_ADDR1_GLOBAL		0x00020000
+#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT	0x00000000
+#define IXP2000_UENGINE_LM_ADDR0_GLOBAL		0x00010000
+#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT	0x00000000
+
+
+#endif
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
new file mode 100644
index 00000000000..263f2c362a3
--- /dev/null
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -0,0 +1,45 @@
+/*
+ *  arch/arm/include/asm/hardware/vic.h
+ *
+ *  Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_HARDWARE_VIC_H
+#define __ASM_ARM_HARDWARE_VIC_H
+
+#define VIC_IRQ_STATUS			0x00
+#define VIC_FIQ_STATUS			0x04
+#define VIC_RAW_STATUS			0x08
+#define VIC_INT_SELECT			0x0c	/* 1 = FIQ, 0 = IRQ */
+#define VIC_INT_ENABLE			0x10	/* 1 = enable, 0 = disable */
+#define VIC_INT_ENABLE_CLEAR		0x14
+#define VIC_INT_SOFT			0x18
+#define VIC_INT_SOFT_CLEAR		0x1c
+#define VIC_PROTECT			0x20
+#define VIC_VECT_ADDR			0x30
+#define VIC_DEF_VECT_ADDR		0x34
+
+#define VIC_VECT_ADDR0			0x100	/* 0 to 15 */
+#define VIC_VECT_CNTL0			0x200	/* 0 to 15 */
+#define VIC_ITCR			0x300	/* VIC test control register */
+
+#define VIC_VECT_CNTL_ENABLE		(1 << 5)
+
+#ifndef __ASSEMBLY__
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h
new file mode 100644
index 00000000000..90831f6f5f5
--- /dev/null
+++ b/arch/arm/include/asm/hw_irq.h
@@ -0,0 +1,27 @@
+/*
+ * Nothing to see here yet
+ */
+#ifndef _ARCH_ARM_HW_IRQ_H
+#define _ARCH_ARM_HW_IRQ_H
+
+static inline void ack_bad_irq(int irq)
+{
+	extern unsigned long irq_err_count;
+	irq_err_count++;
+}
+
+/*
+ * Obsolete inline function for calling irq descriptor handlers.
+ */
+static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc)
+{
+	desc->handle_irq(irq, desc);
+}
+
+void set_irq_flags(unsigned int irq, unsigned int flags);
+
+#define IRQF_VALID	(1 << 0)
+#define IRQF_PROBE	(1 << 1)
+#define IRQF_NOAUTOEN	(1 << 2)
+
+#endif
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
new file mode 100644
index 00000000000..81f4c899a55
--- /dev/null
+++ b/arch/arm/include/asm/hwcap.h
@@ -0,0 +1,29 @@
+#ifndef __ASMARM_HWCAP_H
+#define __ASMARM_HWCAP_H
+
+/*
+ * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
+ */
+#define HWCAP_SWP	1
+#define HWCAP_HALF	2
+#define HWCAP_THUMB	4
+#define HWCAP_26BIT	8	/* Play it safe */
+#define HWCAP_FAST_MULT	16
+#define HWCAP_FPA	32
+#define HWCAP_VFP	64
+#define HWCAP_EDSP	128
+#define HWCAP_JAVA	256
+#define HWCAP_IWMMXT	512
+#define HWCAP_CRUNCH	1024
+#define HWCAP_THUMBEE	2048
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP	(elf_hwcap)
+extern unsigned int elf_hwcap;
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/ide.h b/arch/arm/include/asm/ide.h
new file mode 100644
index 00000000000..b507ce8e501
--- /dev/null
+++ b/arch/arm/include/asm/ide.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/include/asm/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the ARM architecture specific IDE code.
+ */
+
+#ifndef __ASMARM_IDE_H
+#define __ASMARM_IDE_H
+
+#ifdef __KERNEL__
+
+#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
+#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
+#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
+#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMARM_IDE_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
new file mode 100644
index 00000000000..71934856fc2
--- /dev/null
+++ b/arch/arm/include/asm/io.h
@@ -0,0 +1,290 @@
+/*
+ *  arch/arm/include/asm/io.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
+ *			constant addresses and variable addresses.
+ *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
+ *			specific IO header files.
+ *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
+ *  04-Apr-1999	PJB	Added check_signature.
+ *  12-Dec-1999	RMK	More cleanups
+ *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
+ *  05-Oct-2004 BJD     Moved memory string functions to use void __iomem
+ */
+#ifndef __ASM_ARM_IO_H
+#define __ASM_ARM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+
+extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
+#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
+#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
+
+#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
+#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
+#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
+
+/*
+ * Architecture ioremap implementation.
+ */
+#define MT_DEVICE		0
+#define MT_DEVICE_NONSHARED	1
+#define MT_DEVICE_CACHED	2
+#define MT_DEVICE_IXP2000	3
+#define MT_DEVICE_WC		4
+/*
+ * types 5 onwards can be found in asm/mach/map.h and are undefined
+ * for ioremap
+ */
+
+/*
+ * __arm_ioremap takes CPU physical address.
+ * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
+ */
+extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
+extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
+extern void __iounmap(volatile void __iomem *addr);
+
+/*
+ * Bad read/write accesses...
+ */
+extern void __readwrite_bug(const char *fn);
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+#include <mach/io.h>
+
+/*
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerous
+ * ARM documents:
+ *
+ *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
+ *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions.  Note that
+ * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+ */
+#ifdef __io
+#define outb(v,p)		__raw_writeb(v,__io(p))
+#define outw(v,p)		__raw_writew((__force __u16) \
+					cpu_to_le16(v),__io(p))
+#define outl(v,p)		__raw_writel((__force __u32) \
+					cpu_to_le32(v),__io(p))
+
+#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __v; })
+#define inw(p)	({ __u16 __v = le16_to_cpu((__force __le16) \
+			__raw_readw(__io(p))); __v; })
+#define inl(p)	({ __u32 __v = le32_to_cpu((__force __le32) \
+			__raw_readl(__io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
+#define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
+#define outsl(p,d,l)		__raw_writesl(__io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(__io(p),d,l)
+#define insw(p,d,l)		__raw_readsw(__io(p),d,l)
+#define insl(p,d,l)		__raw_readsl(__io(p),d,l)
+#endif
+
+#define outb_p(val,port)	outb((val),(port))
+#define outw_p(val,port)	outw((val),(port))
+#define outl_p(val,port)	outl((val),(port))
+#define inb_p(port)		inb((port))
+#define inw_p(port)		inw((port))
+#define inl_p(port)		inl((port))
+
+#define outsb_p(port,from,len)	outsb(port,from,len)
+#define outsw_p(port,from,len)	outsw(port,from,len)
+#define outsl_p(port,from,len)	outsl(port,from,len)
+#define insb_p(port,to,len)	insb(port,to,len)
+#define insw_p(port,to,len)	insw(port,to,len)
+#define insl_p(port,to,len)	insl(port,to,len)
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t);
+extern void _memcpy_toio(volatile void __iomem *, const void *, size_t);
+extern void _memset_io(volatile void __iomem *, int, size_t);
+
+#define mmiowb()
+
+/*
+ *  Memory access primitives
+ *  ------------------------
+ *
+ * These perform PCI memory accesses via an ioremap region.  They don't
+ * take an address as such, but a cookie.
+ *
+ * Again, this are defined to perform little endian accesses.  See the
+ * IO port primitives for more information.
+ */
+#ifdef __mem_pci
+#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
+					__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
+					__raw_readl(__mem_pci(c))); __v; })
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
+#define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
+#define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
+
+#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
+#define writew(v,c)		__raw_writew((__force __u16) \
+					cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c)		__raw_writel((__force __u32) \
+					cpu_to_le32(v),__mem_pci(c))
+
+#define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
+#define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
+#define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
+
+#define memset_io(c,v,l)	_memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l)	_memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l)	_memcpy_toio(__mem_pci(c),(a),(l))
+
+#elif !defined(readb)
+
+#define readb(c)			(__readwrite_bug("readb"),0)
+#define readw(c)			(__readwrite_bug("readw"),0)
+#define readl(c)			(__readwrite_bug("readl"),0)
+#define writeb(v,c)			__readwrite_bug("writeb")
+#define writew(v,c)			__readwrite_bug("writew")
+#define writel(v,c)			__readwrite_bug("writel")
+
+#define check_signature(io,sig,len)	(0)
+
+#endif	/* __mem_pci */
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * Documentation/IO-mapping.txt.
+ *
+ */
+#ifndef __arch_ioremap
+#define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
+#define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
+#define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE_WC)
+#define iounmap(cookie)			__iounmap(cookie)
+#else
+#define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
+#define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
+#define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE_WC)
+#define iounmap(cookie)			__arch_iounmap(cookie)
+#endif
+
+/*
+ * io{read,write}{8,16,32} macros
+ */
+#ifndef ioread8
+#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
+#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
+#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
+
+#define iowrite8(v,p)	__raw_writeb(v, p)
+#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
+#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
+
+#define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
+#define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
+#define ioread32_rep(p,d,c)	__raw_readsl(p,d,c)
+
+#define iowrite8_rep(p,s,c)	__raw_writesb(p,s,c)
+#define iowrite16_rep(p,s,c)	__raw_writesw(p,s,c)
+#define iowrite32_rep(p,s,c)	__raw_writesl(p,s,c)
+
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *addr);
+#endif
+
+struct pci_dev;
+
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+
+/*
+ * can the hardware map this into one segment or not, given no other
+ * constraints.
+ */
+#define BIOVEC_MERGEABLE(vec1, vec2)	\
+	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
+
+#ifdef CONFIG_MMU
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range(unsigned long addr, size_t size);
+extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/*
+ * Register ISA memory and port locations for glibc iopl/inb/outb
+ * emulation.
+ */
+extern void register_isa_ports(unsigned int mmio, unsigned int io,
+			       unsigned int io_shift);
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_ARM_IO_H */
diff --git a/arch/arm/include/asm/ioctl.h b/arch/arm/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/arm/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
new file mode 100644
index 00000000000..a91d8a1523c
--- /dev/null
+++ b/arch/arm/include/asm/ioctls.h
@@ -0,0 +1,84 @@
+#ifndef __ASM_ARM_IOCTLS_H
+#define __ASM_ARM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..97683975f7d
--- /dev/null
+++ b/arch/arm/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASMARM_IPCBUF_H
+#define __ASMARM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASMARM_IPCBUF_H */
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
new file mode 100644
index 00000000000..d6786090d02
--- /dev/null
+++ b/arch/arm/include/asm/irq.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_ARM_IRQ_H
+#define __ASM_ARM_IRQ_H
+
+#include <mach/irqs.h>
+
+#ifndef irq_canonicalize
+#define irq_canonicalize(i)	(i)
+#endif
+
+#ifndef NR_IRQS
+#define NR_IRQS	128
+#endif
+
+/*
+ * Use this value to indicate lack of interrupt
+ * capability
+ */
+#ifndef NO_IRQ
+#define NO_IRQ	((unsigned int)(-1))
+#endif
+
+#ifndef __ASSEMBLY__
+struct irqaction;
+extern void migrate_irqs(void);
+#endif
+
+#endif
+
diff --git a/arch/arm/include/asm/irq_regs.h b/arch/arm/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/arm/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h
new file mode 100644
index 00000000000..6d09974e664
--- /dev/null
+++ b/arch/arm/include/asm/irqflags.h
@@ -0,0 +1,132 @@
+#ifndef __ASM_ARM_IRQFLAGS_H
+#define __ASM_ARM_IRQFLAGS_H
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+/*
+ * CPU interrupt mask handling.
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+
+#define raw_local_irq_save(x)					\
+	({							\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_save\n"	\
+	"cpsid	i"						\
+	: "=r" (x) : : "memory", "cc");				\
+	})
+
+#define raw_local_irq_enable()  __asm__("cpsie i	@ __sti" : : : "memory", "cc")
+#define raw_local_irq_disable() __asm__("cpsid i	@ __cli" : : : "memory", "cc")
+#define local_fiq_enable()  __asm__("cpsie f	@ __stf" : : : "memory", "cc")
+#define local_fiq_disable() __asm__("cpsid f	@ __clf" : : : "memory", "cc")
+
+#else
+
+/*
+ * Save the current interrupt enable state & disable IRQs
+ */
+#define raw_local_irq_save(x)					\
+	({							\
+		unsigned long temp;				\
+		(void) (&temp == &x);				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_save\n"	\
+"	orr	%1, %0, #128\n"					\
+"	msr	cpsr_c, %1"					\
+	: "=r" (x), "=r" (temp)					\
+	:							\
+	: "memory", "cc");					\
+	})
+	
+/*
+ * Enable IRQs
+ */
+#define raw_local_irq_enable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_enable\n"	\
+"	bic	%0, %0, #128\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Disable IRQs
+ */
+#define raw_local_irq_disable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_disable\n"	\
+"	orr	%0, %0, #128\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Enable FIQs
+ */
+#define local_fiq_enable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ stf\n"		\
+"	bic	%0, %0, #64\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Disable FIQs
+ */
+#define local_fiq_disable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ clf\n"		\
+"	orr	%0, %0, #64\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+#endif
+
+/*
+ * Save the current interrupt enable state.
+ */
+#define raw_local_save_flags(x)					\
+	({							\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_save_flags"	\
+	: "=r" (x) : : "memory", "cc");				\
+	})
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define raw_local_irq_restore(x)				\
+	__asm__ __volatile__(					\
+	"msr	cpsr_c, %0		@ local_irq_restore\n"	\
+	:							\
+	: "r" (x)						\
+	: "memory", "cc")
+
+#define raw_irqs_disabled_flags(flags)	\
+({					\
+	(int)((flags) & PSR_I_BIT);	\
+})
+
+#endif
+#endif
diff --git a/arch/arm/include/asm/kdebug.h b/arch/arm/include/asm/kdebug.h
new file mode 100644
index 00000000000..6ece1b03766
--- /dev/null
+++ b/arch/arm/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
new file mode 100644
index 00000000000..df15a0dc228
--- /dev/null
+++ b/arch/arm/include/asm/kexec.h
@@ -0,0 +1,31 @@
+#ifndef _ARM_KEXEC_H
+#define _ARM_KEXEC_H
+
+#ifdef CONFIG_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+
+#define KEXEC_CONTROL_PAGE_SIZE	4096
+
+#define KEXEC_ARCH KEXEC_ARCH_ARM
+
+#define KEXEC_ARM_ATAGS_OFFSET  0x1000
+#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
+
+#ifndef __ASSEMBLY__
+
+struct kimage;
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+                                        struct pt_regs *oldregs) { }
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_KEXEC */
+
+#endif /* _ARM_KEXEC_H */
diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h
new file mode 100644
index 00000000000..67af4b84198
--- /dev/null
+++ b/arch/arm/include/asm/kgdb.h
@@ -0,0 +1,104 @@
+/*
+ * ARM KGDB support
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ *
+ */
+
+#ifndef __ARM_KGDB_H__
+#define __ARM_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/*
+ * GDB assumes that we're a user process being debugged, so
+ * it will send us an SWI command to write into memory as the
+ * debug trap. When an SWI occurs, the next instruction addr is
+ * placed into R14_svc before jumping to the vector trap.
+ * This doesn't work for kernel debugging as we are already in SVC
+ * we would loose the kernel's LR, which is a bad thing. This
+ * is  bad thing.
+ *
+ * By doing this as an undefined instruction trap, we force a mode
+ * switch from SVC to UND mode, allowing us to save full kernel state.
+ *
+ * We also define a KGDB_COMPILED_BREAK which can be used to compile
+ * in breakpoints. This is important for things like sysrq-G and for
+ * the initial breakpoint from trap_init().
+ *
+ * Note to ARM HW designers: Add real trap support like SH && PPC to
+ * make our lives much much simpler. :)
+ */
+#define BREAK_INSTR_SIZE	4
+#define GDB_BREAKINST		0xef9f0001
+#define KGDB_BREAKINST		0xe7ffdefe
+#define KGDB_COMPILED_BREAK	0xe7ffdeff
+#define CACHE_FLUSH_IS_SAFE	1
+
+#ifndef	__ASSEMBLY__
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".word 0xe7ffdeff");
+}
+
+extern void kgdb_handle_bus_error(void);
+extern int kgdb_fault_expected;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * From Kevin Hilman:
+ *
+ * gdb is expecting the following registers layout.
+ *
+ * r0-r15: 1 long word each
+ * f0-f7:  unused, 3 long words each !!
+ * fps:    unused, 1 long word
+ * cpsr:   1 long word
+ *
+ * Even though f0-f7 and fps are not used, they need to be
+ * present in the registers sent for correct processing in
+ * the host-side gdb.
+ *
+ * In particular, it is crucial that CPSR is in the right place,
+ * otherwise gdb will not be able to correctly interpret stepping over
+ * conditional branches.
+ */
+#define _GP_REGS		16
+#define _FP_REGS		8
+#define _EXTRA_REGS		2
+#define GDB_MAX_REGS		(_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
+
+#define KGDB_MAX_NO_CPUS	1
+#define BUFMAX			400
+#define NUMREGBYTES		(GDB_MAX_REGS << 2)
+#define NUMCRITREGBYTES		(32 << 2)
+
+#define _R0			0
+#define _R1			1
+#define _R2			2
+#define _R3			3
+#define _R4			4
+#define _R5			5
+#define _R6			6
+#define _R7			7
+#define _R8			8
+#define _R9			9
+#define _R10			10
+#define _FP			11
+#define _IP			12
+#define _SPT			13
+#define _LR			14
+#define _PC			15
+#define _CPSR			(GDB_MAX_REGS - 1)
+
+/*
+ * So that we can denote the end of a frame for tracing,
+ * in the simple case:
+ */
+#define CFI_END_FRAME(func)	__CFI_END_FRAME(_PC, _SPT, func)
+
+#endif /* __ASM_KGDB_H__ */
diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
new file mode 100644
index 00000000000..45def13ee17
--- /dev/null
+++ b/arch/arm/include/asm/kmap_types.h
@@ -0,0 +1,24 @@
+#ifndef __ARM_KMAP_TYPES_H
+#define __ARM_KMAP_TYPES_H
+
+/*
+ * This is the "bare minimum".  AIO seems to require this.
+ */
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
new file mode 100644
index 00000000000..a5d0d99ad38
--- /dev/null
+++ b/arch/arm/include/asm/kprobes.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/include/asm/kprobes.h
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _ARM_KPROBES_H
+#define _ARM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			2
+#define MAX_STACK_SIZE			64	/* 32 would probably be OK */
+
+/*
+ * This undefined instruction must be unique and
+ * reserved solely for kprobes' use.
+ */
+#define KPROBE_BREAKPOINT_INSTRUCTION	0xe7f001f8
+
+#define regs_return_value(regs)		((regs)->ARM_r0)
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+typedef u32 kprobe_opcode_t;
+
+struct kprobe;
+typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
+
+/* Architecture specific copy of original instruction. */
+struct arch_specific_insn {
+	kprobe_opcode_t		*insn;
+	kprobe_insn_handler_t	*insn_handler;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned int status;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	struct prev_kprobe prev_kprobe;
+	struct pt_regs jprobe_saved_regs;
+	char jprobes_stack[MAX_STACK_SIZE];
+};
+
+void arch_remove_kprobe(struct kprobe *);
+void kretprobe_trampoline(void);
+
+int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
+int kprobe_exceptions_notify(struct notifier_block *self,
+			     unsigned long val, void *data);
+
+enum kprobe_insn {
+	INSN_REJECTED,
+	INSN_GOOD,
+	INSN_GOOD_NO_SLOT
+};
+
+enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
+					struct arch_specific_insn *);
+void __init arm_kprobe_decode_init(void);
+
+#endif /* _ARM_KPROBES_H */
diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h
new file mode 100644
index 00000000000..c545739f39b
--- /dev/null
+++ b/arch/arm/include/asm/leds.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/include/asm/leds.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Event-driven interface for LEDs on machines
+ *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
+ */
+#ifndef ASM_ARM_LEDS_H
+#define ASM_ARM_LEDS_H
+
+
+typedef enum {
+	led_idle_start,
+	led_idle_end,
+	led_timer,
+	led_start,
+	led_stop,
+	led_claim,		/* override idle & timer leds */
+	led_release,		/* restore idle & timer leds */
+	led_start_timer_mode,
+	led_stop_timer_mode,
+	led_green_on,
+	led_green_off,
+	led_amber_on,
+	led_amber_off,
+	led_red_on,
+	led_red_off,
+	led_blue_on,
+	led_blue_off,
+	/*
+	 * I want this between led_timer and led_start, but
+	 * someone has decided to export this to user space
+	 */
+	led_halted
+} led_event_t;
+
+/* Use this routine to handle LEDs */
+
+#ifdef CONFIG_LEDS
+extern void (*leds_event)(led_event_t);
+#else
+#define leds_event(e)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/limits.h b/arch/arm/include/asm/limits.h
new file mode 100644
index 00000000000..08d8c660080
--- /dev/null
+++ b/arch/arm/include/asm/limits.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_PIPE_H
+#define __ASM_PIPE_H
+
+#ifndef PAGE_SIZE
+#include <asm/page.h>
+#endif
+
+#define PIPE_BUF	PAGE_SIZE
+
+#endif
+
diff --git a/arch/arm/include/asm/linkage.h b/arch/arm/include/asm/linkage.h
new file mode 100644
index 00000000000..5a25632b1bc
--- /dev/null
+++ b/arch/arm/include/asm/linkage.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#define ENDPROC(name) \
+  .type name, %function; \
+  END(name)
+
+#endif
diff --git a/arch/arm/include/asm/local.h b/arch/arm/include/asm/local.h
new file mode 100644
index 00000000000..c11c530f74d
--- /dev/null
+++ b/arch/arm/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/arm/include/asm/locks.h b/arch/arm/include/asm/locks.h
new file mode 100644
index 00000000000..ef4c897772d
--- /dev/null
+++ b/arch/arm/include/asm/locks.h
@@ -0,0 +1,274 @@
+/*
+ *  arch/arm/include/asm/locks.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Interrupt safe locking assembler. 
+ */
+#ifndef __ASM_PROC_LOCKS_H
+#define __ASM_PROC_LOCKS_H
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+#define __down_op(ptr,fail)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op\n"				\
+"1:	ldrex	lr, [%0]\n"			\
+"	sub	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movmi	ip, %0\n"			\
+"	blmi	" #fail				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __down_op_ret(ptr,fail)			\
+	({					\
+		unsigned int ret;		\
+	__asm__ __volatile__(			\
+	"@ down_op_ret\n"			\
+"1:	ldrex	lr, [%1]\n"			\
+"	sub	lr, lr, %2\n"			\
+"	strex	ip, lr, [%1]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movmi	ip, %1\n"			\
+"	movpl	ip, #0\n"			\
+"	blmi	" #fail "\n"			\
+"	mov	%0, ip"				\
+	: "=&r" (ret)				\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	ret;					\
+	})
+
+#define __up_op(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op\n"				\
+"1:	ldrex	lr, [%0]\n"			\
+"	add	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	cmp	lr, #0\n"			\
+"	movle	ip, %0\n"			\
+"	blle	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+/*
+ * The value 0x01000000 supports up to 128 processors and
+ * lots of processes.  BIAS must be chosen such that sub'ing
+ * BIAS once per CPU will result in the long remaining
+ * negative.
+ */
+#define RW_LOCK_BIAS      0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+#define __down_op_write(ptr,fail)		\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op_write\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	sub	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movne	ip, %0\n"			\
+"	blne	" #fail				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __up_op_write(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op_write\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	movcs	ip, %0\n"			\
+"	blcs	" #wake				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	})
+
+#define __down_op_read(ptr,fail)		\
+	__down_op(ptr, fail)
+
+#define __up_op_read(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	add	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	moveq	ip, %0\n"			\
+"	bleq	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+#else
+
+#define __down_op(ptr,fail)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op\n"				\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	subs	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movmi	ip, %0\n"			\
+"	blmi	" #fail				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __down_op_ret(ptr,fail)			\
+	({					\
+		unsigned int ret;		\
+	__asm__ __volatile__(			\
+	"@ down_op_ret\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%1]\n"			\
+"	subs	lr, lr, %2\n"			\
+"	str	lr, [%1]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movmi	ip, %1\n"			\
+"	movpl	ip, #0\n"			\
+"	blmi	" #fail "\n"			\
+"	mov	%0, ip"				\
+	: "=&r" (ret)				\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	ret;					\
+	})
+
+#define __up_op(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op\n"				\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movle	ip, %0\n"			\
+"	blle	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+/*
+ * The value 0x01000000 supports up to 128 processors and
+ * lots of processes.  BIAS must be chosen such that sub'ing
+ * BIAS once per CPU will result in the long remaining
+ * negative.
+ */
+#define RW_LOCK_BIAS      0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+#define __down_op_write(ptr,fail)		\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op_write\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	subs	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movne	ip, %0\n"			\
+"	blne	" #fail				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __up_op_write(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op_write\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movcs	ip, %0\n"			\
+"	blcs	" #wake				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __down_op_read(ptr,fail)		\
+	__down_op(ptr, fail)
+
+#define __up_op_read(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	moveq	ip, %0\n"			\
+"	bleq	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
new file mode 100644
index 00000000000..c59842dc7cb
--- /dev/null
+++ b/arch/arm/include/asm/mach/arch.h
@@ -0,0 +1,60 @@
+/*
+ *  arch/arm/include/asm/mach/arch.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct tag;
+struct meminfo;
+struct sys_timer;
+
+struct machine_desc {
+	/*
+	 * Note! The first four elements are used
+	 * by assembler code in head.S, head-common.S
+	 */
+	unsigned int		nr;		/* architecture number	*/
+	unsigned int		phys_io;	/* start of physical io	*/
+	unsigned int		io_pg_offst;	/* byte offset for io 
+						 * page tabe entry	*/
+
+	const char		*name;		/* architecture name	*/
+	unsigned long		boot_params;	/* tagged list		*/
+
+	unsigned int		video_start;	/* start of video RAM	*/
+	unsigned int		video_end;	/* end of video RAM	*/
+
+	unsigned int		reserve_lp0 :1;	/* never has lp0	*/
+	unsigned int		reserve_lp1 :1;	/* never has lp1	*/
+	unsigned int		reserve_lp2 :1;	/* never has lp2	*/
+	unsigned int		soft_reboot :1;	/* soft reboot		*/
+	void			(*fixup)(struct machine_desc *,
+					 struct tag *, char **,
+					 struct meminfo *);
+	void			(*map_io)(void);/* IO mapping function	*/
+	void			(*init_irq)(void);
+	struct sys_timer	*timer;		/* system tick timer	*/
+	void			(*init_machine)(void);
+};
+
+/*
+ * Set of macros to define architecture features.  This is built into
+ * a table by the linker.
+ */
+#define MACHINE_START(_type,_name)			\
+static const struct machine_desc __mach_desc_##_type	\
+ __used							\
+ __attribute__((__section__(".arch.info.init"))) = {	\
+	.nr		= MACH_TYPE_##_type,		\
+	.name		= _name,
+
+#define MACHINE_END				\
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
new file mode 100644
index 00000000000..fc7278ea714
--- /dev/null
+++ b/arch/arm/include/asm/mach/dma.h
@@ -0,0 +1,57 @@
+/*
+ *  arch/arm/include/asm/mach/dma.h
+ *
+ *  Copyright (C) 1998-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This header file describes the interface between the generic DMA handler
+ *  (dma.c) and the architecture-specific DMA backends (dma-*.c)
+ */
+
+struct dma_struct;
+typedef struct dma_struct dma_t;
+
+struct dma_ops {
+	int	(*request)(dmach_t, dma_t *);		/* optional */
+	void	(*free)(dmach_t, dma_t *);		/* optional */
+	void	(*enable)(dmach_t, dma_t *);		/* mandatory */
+	void 	(*disable)(dmach_t, dma_t *);		/* mandatory */
+	int	(*residue)(dmach_t, dma_t *);		/* optional */
+	int	(*setspeed)(dmach_t, dma_t *, int);	/* optional */
+	char	*type;
+};
+
+struct dma_struct {
+	void		*addr;		/* single DMA address		*/
+	unsigned long	count;		/* single DMA size		*/
+	struct scatterlist buf;		/* single DMA			*/
+	int		sgcount;	/* number of DMA SG		*/
+	struct scatterlist *sg;		/* DMA Scatter-Gather List	*/
+
+	unsigned int	active:1;	/* Transfer active		*/
+	unsigned int	invalid:1;	/* Address/Count changed	*/
+
+	dmamode_t	dma_mode;	/* DMA mode			*/
+	int		speed;		/* DMA speed			*/
+
+	unsigned int	lock;		/* Device is allocated		*/
+	const char	*device_id;	/* Device name			*/
+
+	unsigned int	dma_base;	/* Controller base address	*/
+	int		dma_irq;	/* Controller IRQ		*/
+	struct scatterlist cur_sg;	/* Current controller buffer	*/
+	unsigned int	state;
+
+	struct dma_ops	*d_ops;
+};
+
+/* Prototype: void arch_dma_init(dma)
+ * Purpose  : Initialise architecture specific DMA
+ * Params   : dma - pointer to array of DMA structures
+ */
+extern void arch_dma_init(dma_t *dma);
+
+extern void isa_init_dma(dma_t *dma);
diff --git a/arch/arm/include/asm/mach/flash.h b/arch/arm/include/asm/mach/flash.h
new file mode 100644
index 00000000000..4ca69fe2c85
--- /dev/null
+++ b/arch/arm/include/asm/mach/flash.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/include/asm/mach/flash.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_MACH_FLASH_H
+#define ASMARM_MACH_FLASH_H
+
+struct mtd_partition;
+struct mtd_info;
+
+/*
+ * map_name:	the map probe function name
+ * name:	flash device name (eg, as used with mtdparts=)
+ * width:	width of mapped device
+ * init:	method called at driver/device initialisation
+ * exit:	method called at driver/device removal
+ * set_vpp:	method called to enable or disable VPP
+ * mmcontrol:	method called to enable or disable Sync. Burst Read in OneNAND
+ * parts:	optional array of mtd_partitions for static partitioning
+ * nr_parts:	number of mtd_partitions for static partitoning
+ */
+struct flash_platform_data {
+	const char	*map_name;
+	const char	*name;
+	unsigned int	width;
+	int		(*init)(void);
+	void		(*exit)(void);
+	void		(*set_vpp)(int on);
+	void		(*mmcontrol)(struct mtd_info *mtd, int sync_read);
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/irda.h b/arch/arm/include/asm/mach/irda.h
new file mode 100644
index 00000000000..38f77b5e56c
--- /dev/null
+++ b/arch/arm/include/asm/mach/irda.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/include/asm/mach/irda.h
+ *
+ *  Copyright (C) 2004 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRDA_H
+#define __ASM_ARM_MACH_IRDA_H
+
+struct irda_platform_data {
+	int (*startup)(struct device *);
+	void (*shutdown)(struct device *);
+	int (*set_power)(struct device *, unsigned int state);
+	void (*set_speed)(struct device *, unsigned int speed);
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
new file mode 100644
index 00000000000..acac5302e4e
--- /dev/null
+++ b/arch/arm/include/asm/mach/irq.h
@@ -0,0 +1,34 @@
+/*
+ *  arch/arm/include/asm/mach/irq.h
+ *
+ *  Copyright (C) 1995-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRQ_H
+#define __ASM_ARM_MACH_IRQ_H
+
+#include <linux/irq.h>
+
+struct seq_file;
+
+/*
+ * This is internal.  Do not use it.
+ */
+extern void (*init_arch_irq)(void);
+extern void init_FIQ(void);
+extern int show_fiq_list(struct seq_file *, void *);
+
+/*
+ * This is for easy migration, but should be changed in the source
+ */
+#define do_bad_IRQ(irq,desc)				\
+do {							\
+	spin_lock(&desc->lock);				\
+	handle_bad_irq(irq, desc);			\
+	spin_unlock(&desc->lock);			\
+} while(0)
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
new file mode 100644
index 00000000000..9eb936e49cc
--- /dev/null
+++ b/arch/arm/include/asm/mach/map.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/include/asm/map.h
+ *
+ *  Copyright (C) 1999-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Page table mapping constructs and function prototypes
+ */
+#include <asm/io.h>
+
+struct map_desc {
+	unsigned long virtual;
+	unsigned long pfn;
+	unsigned long length;
+	unsigned int type;
+};
+
+/* types 0-4 are defined in asm/io.h */
+#define MT_CACHECLEAN		5
+#define MT_MINICLEAN		6
+#define MT_LOW_VECTORS		7
+#define MT_HIGH_VECTORS		8
+#define MT_MEMORY		9
+#define MT_ROM			10
+
+#define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
+#define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
+
+#ifdef CONFIG_MMU
+extern void iotable_init(struct map_desc *, int);
+#else
+#define iotable_init(map,num)	do { } while (0)
+#endif
diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
new file mode 100644
index 00000000000..4da332b0314
--- /dev/null
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -0,0 +1,15 @@
+/*
+ *  arch/arm/include/asm/mach/mmc.h
+ */
+#ifndef ASMARM_MACH_MMC_H
+#define ASMARM_MACH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct mmc_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	u32 (*translate_vdd)(struct device *, unsigned int);
+	unsigned int (*status)(struct device *);
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
new file mode 100644
index 00000000000..32da1ae17e0
--- /dev/null
+++ b/arch/arm/include/asm/mach/pci.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/include/asm/mach/pci.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct pci_sys_data;
+struct pci_bus;
+
+struct hw_pci {
+	struct list_head buses;
+	int		nr_controllers;
+	int		(*setup)(int nr, struct pci_sys_data *);
+	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+	void		(*preinit)(void);
+	void		(*postinit)(void);
+	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);
+	int		(*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+};
+
+/*
+ * Per-controller structure
+ */
+struct pci_sys_data {
+	struct list_head node;
+	int		busnr;		/* primary bus number			*/
+	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
+	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
+	struct pci_bus	*bus;		/* PCI bus				*/
+	struct resource *resource[3];	/* Primary PCI bus resources		*/
+					/* Bridge swizzling			*/
+	u8		(*swizzle)(struct pci_dev *, u8 *);
+					/* IRQ mapping				*/
+	int		(*map_irq)(struct pci_dev *, u8, u8);
+	struct hw_pci	*hw;
+};
+
+/*
+ * This is the standard PCI-PCI bridge swizzling algorithm.
+ */
+u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp);
+
+/*
+ * Call this with your hw_pci struct to initialise the PCI system.
+ */
+void pci_common_init(struct hw_pci *);
+
+/*
+ * PCI controllers
+ */
+extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
+extern void iop3xx_pci_preinit(void);
+extern void iop3xx_pci_preinit_cond(void);
+
+extern int dc21285_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
+extern void dc21285_preinit(void);
+extern void dc21285_postinit(void);
+
+extern int via82c505_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
+extern void via82c505_init(void *sysdata);
+
+extern int pci_v3_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
+extern void pci_v3_preinit(void);
+extern void pci_v3_postinit(void);
diff --git a/arch/arm/include/asm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h
new file mode 100644
index 00000000000..ea6d063923b
--- /dev/null
+++ b/arch/arm/include/asm/mach/serial_at91.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/include/asm/mach/serial_at91.h
+ *
+ *  Based on serial_sa1100.h  by Nicolas Pitre
+ *
+ *  Copyright (C) 2002 ATMEL Rousset
+ *
+ *  Low level machine dependent UART functions.
+ */
+
+struct uart_port;
+
+/*
+ * This is a temporary structure for registering these
+ * functions; it is intended to be discarded after boot.
+ */
+struct atmel_port_fns {
+	void	(*set_mctrl)(struct uart_port *, u_int);
+	u_int	(*get_mctrl)(struct uart_port *);
+	void	(*enable_ms)(struct uart_port *);
+	void	(*pm)(struct uart_port *, u_int, u_int);
+	int	(*set_wake)(struct uart_port *, u_int);
+	int	(*open)(struct uart_port *);
+	void	(*close)(struct uart_port *);
+};
+
+#if defined(CONFIG_SERIAL_ATMEL)
+void atmel_register_uart_fns(struct atmel_port_fns *fns);
+#else
+#define atmel_register_uart_fns(fns) do { } while (0)
+#endif
+
+
diff --git a/arch/arm/include/asm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h
new file mode 100644
index 00000000000..d09064bf95a
--- /dev/null
+++ b/arch/arm/include/asm/mach/serial_sa1100.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/include/asm/mach/serial_sa1100.h
+ *
+ *  Author: Nicolas Pitre
+ *
+ * Moved and changed lots, Russell King
+ *
+ * Low level machine dependent UART functions.
+ */
+
+struct uart_port;
+struct uart_info;
+
+/*
+ * This is a temporary structure for registering these
+ * functions; it is intended to be discarded after boot.
+ */
+struct sa1100_port_fns {
+	void	(*set_mctrl)(struct uart_port *, u_int);
+	u_int	(*get_mctrl)(struct uart_port *);
+	void	(*pm)(struct uart_port *, u_int, u_int);
+	int	(*set_wake)(struct uart_port *, u_int);
+};
+
+#ifdef CONFIG_SERIAL_SA1100
+void sa1100_register_uart_fns(struct sa1100_port_fns *fns);
+void sa1100_register_uart(int idx, int port);
+#else
+#define sa1100_register_uart_fns(fns) do { } while (0)
+#define sa1100_register_uart(idx,port) do { } while (0)
+#endif
diff --git a/arch/arm/include/asm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h
new file mode 100644
index 00000000000..7a24ecf0422
--- /dev/null
+++ b/arch/arm/include/asm/mach/sharpsl_param.h
@@ -0,0 +1,37 @@
+/*
+ * Hardware parameter area specific to Sharp SL series devices
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct sharpsl_param_info {
+  unsigned int comadj_keyword;
+  unsigned int comadj;
+
+  unsigned int uuid_keyword;
+  unsigned char uuid[16];
+
+  unsigned int touch_keyword;
+  unsigned int touch_xp;
+  unsigned int touch_yp;
+  unsigned int touch_xd;
+  unsigned int touch_yd;
+
+  unsigned int adadj_keyword;
+  unsigned int adadj;
+
+  unsigned int phad_keyword;
+  unsigned int phadadj;
+} __attribute__((packed));
+
+
+extern struct sharpsl_param_info sharpsl_param;
+extern void sharpsl_save_param(void);
+
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
new file mode 100644
index 00000000000..b2cc1fcd040
--- /dev/null
+++ b/arch/arm/include/asm/mach/time.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/include/asm/mach/time.h
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_TIME_H
+#define __ASM_ARM_MACH_TIME_H
+
+#include <linux/sysdev.h>
+
+/*
+ * This is our kernel timer structure.
+ *
+ * - init
+ *   Initialise the kernels jiffy timer source, claim interrupt
+ *   using setup_irq.  This is called early on during initialisation
+ *   while interrupts are still disabled on the local CPU.
+ * - suspend
+ *   Suspend the kernel jiffy timer source, if necessary.  This
+ *   is called with interrupts disabled, after all normal devices
+ *   have been suspended.  If no action is required, set this to
+ *   NULL.
+ * - resume
+ *   Resume the kernel jiffy timer source, if necessary.  This
+ *   is called with interrupts disabled before any normal devices
+ *   are resumed.  If no action is required, set this to NULL.
+ * - offset
+ *   Return the timer offset in microseconds since the last timer
+ *   interrupt.  Note: this must take account of any unprocessed
+ *   timer interrupt which may be pending.
+ */
+struct sys_timer {
+	struct sys_device	dev;
+	void			(*init)(void);
+	void			(*suspend)(void);
+	void			(*resume)(void);
+#ifndef CONFIG_GENERIC_TIME
+	unsigned long		(*offset)(void);
+#endif
+};
+
+extern struct sys_timer *system_timer;
+extern void timer_tick(void);
+
+/*
+ * Kernel time keeping support.
+ */
+struct timespec;
+extern int (*set_rtc)(void);
+extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
+extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
+
+#endif
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
new file mode 100644
index 00000000000..270902c353f
--- /dev/null
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/include/asm/mach/udc_pxa2xx.h
+ *
+ * This supports machine-specific differences in how the PXA2xx
+ * USB Device Controller (UDC) is wired.
+ *
+ * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
+ * linux/arch/mach-ixp4xx/<machine>.c and used in
+ * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
+ */
+
+struct pxa2xx_udc_mach_info {
+        int  (*udc_is_connected)(void);		/* do we see host? */
+        void (*udc_command)(int cmd);
+#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
+#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
+
+	/* Boards following the design guidelines in the developer's manual,
+	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
+	 * VBUS IRQ and omit the methods above.  Store the GPIO number
+	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
+	 * Note that sometimes the signals go through inverters...
+	 */
+	bool	gpio_vbus_inverted;
+	u16	gpio_vbus;			/* high == vbus present */
+	bool	gpio_pullup_inverted;
+	u16	gpio_pullup;			/* high == pullup activated */
+};
+
diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..e1ca48a9e97
--- /dev/null
+++ b/arch/arm/include/asm/mc146818rtc.h
@@ -0,0 +1,28 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
new file mode 100644
index 00000000000..bf7c737c922
--- /dev/null
+++ b/arch/arm/include/asm/memory.h
@@ -0,0 +1,328 @@
+/*
+ *  arch/arm/include/asm/memory.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *  modification for nommu, Hyok S. Choi, 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_ARM_MEMORY_H
+#define __ASM_ARM_MEMORY_H
+
+/*
+ * Allow for constants defined here to be used from assembly code
+ * by prepending the UL suffix only with actual C code compilation.
+ */
+#ifndef __ASSEMBLY__
+#define UL(x) (x##UL)
+#else
+#define UL(x) (x)
+#endif
+
+#include <linux/compiler.h>
+#include <mach/memory.h>
+#include <asm/sizes.h>
+
+#ifdef CONFIG_MMU
+
+#ifndef TASK_SIZE
+/*
+ * TASK_SIZE - the maximum size of a user space task.
+ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
+ */
+#define TASK_SIZE		UL(0xbf000000)
+#define TASK_UNMAPPED_BASE	UL(0x40000000)
+#endif
+
+/*
+ * The maximum size of a 26-bit user space task.
+ */
+#define TASK_SIZE_26		UL(0x04000000)
+
+/*
+ * Page offset: 3GB
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		UL(0xc0000000)
+#endif
+
+/*
+ * The module space lives between the addresses given by TASK_SIZE
+ * and PAGE_OFFSET - it must be within 32MB of the kernel text.
+ */
+#define MODULE_END		(PAGE_OFFSET)
+#define MODULE_START		(MODULE_END - 16*1048576)
+
+#if TASK_SIZE > MODULE_START
+#error Top of user space clashes with start of module space
+#endif
+
+/*
+ * The XIP kernel gets mapped at the bottom of the module vm area.
+ * Since we use sections to map it, this macro replaces the physical address
+ * with its virtual address while keeping offset from the base section.
+ */
+#define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
+
+/*
+ * Allow 16MB-aligned ioremap pages
+ */
+#define IOREMAP_MAX_ORDER	24
+
+#else /* CONFIG_MMU */
+
+/*
+ * The limitation of user task size can grow up to the end of free ram region.
+ * It is difficult to define and perhaps will never meet the original meaning
+ * of this define that was meant to.
+ * Fortunately, there is no reference for this in noMMU mode, for now.
+ */
+#ifndef TASK_SIZE
+#define TASK_SIZE		(CONFIG_DRAM_SIZE)
+#endif
+
+#ifndef TASK_UNMAPPED_BASE
+#define TASK_UNMAPPED_BASE	UL(0x00000000)
+#endif
+
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET 		(CONFIG_DRAM_BASE)
+#endif
+
+#ifndef END_MEM
+#define END_MEM     		(CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
+#endif
+
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		(PHYS_OFFSET)
+#endif
+
+/*
+ * The module can be at any place in ram in nommu mode.
+ */
+#define MODULE_END		(END_MEM)
+#define MODULE_START		(PHYS_OFFSET)
+
+#endif /* !CONFIG_MMU */
+
+/*
+ * Size of DMA-consistent memory region.  Must be multiple of 2M,
+ * between 2MB and 14MB inclusive.
+ */
+#ifndef CONSISTENT_DMA_SIZE
+#define CONSISTENT_DMA_SIZE SZ_2M
+#endif
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#ifndef __virt_to_phys
+#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
+
+/*
+ * Convert a physical address to a Page Frame Number and back
+ */
+#define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
+#define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The DMA mask corresponding to the maximum bus address allocatable
+ * using GFP_DMA.  The default here places no restriction on DMA
+ * allocations.  This must be the smallest DMA mask in the system,
+ * so a successful GFP_DMA allocation will always satisfy this.
+ */
+#ifndef ISA_DMA_THRESHOLD
+#define ISA_DMA_THRESHOLD	(0xffffffffULL)
+#endif
+
+#ifndef arch_adjust_zones
+#define arch_adjust_zones(node,size,holes) do { } while (0)
+#endif
+
+/*
+ * Amount of memory reserved for the vmalloc() area, and minimum
+ * address for vmalloc mappings.
+ */
+extern unsigned long vmalloc_reserve;
+
+#define VMALLOC_MIN		(void *)(VMALLOC_END - vmalloc_reserve)
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * These are *only* valid on the kernel direct mapped RAM memory.
+ * Note: Drivers should NOT use these.  They are the wrong
+ * translation for translating DMA addresses.  Use the driver
+ * DMA support - see dma-mapping.h.
+ */
+static inline unsigned long virt_to_phys(void *x)
+{
+	return __virt_to_phys((unsigned long)(x));
+}
+
+static inline void *phys_to_virt(unsigned long x)
+{
+	return (void *)(__phys_to_virt((unsigned long)(x)));
+}
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+/*
+ * Virtual <-> DMA view memory address translations
+ * Again, these are *only* valid on the kernel direct mapped RAM
+ * memory.  Use of these is *deprecated* (and that doesn't mean
+ * use the __ prefixed forms instead.)  See dma-mapping.h.
+ */
+static inline __deprecated unsigned long virt_to_bus(void *x)
+{
+	return __virt_to_bus((unsigned long)x);
+}
+
+static inline __deprecated void *bus_to_virt(unsigned long x)
+{
+	return (void *)__bus_to_virt(x);
+}
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE().  It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ *  page_to_pfn(page)	convert a struct page * to a PFN number
+ *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
+ *  pfn_valid(pfn)	indicates whether a PFN number is valid
+ *
+ *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(k)	indicates whether a virtual address is valid
+ */
+#ifndef CONFIG_DISCONTIGMEM
+
+#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
+
+#ifndef CONFIG_SPARSEMEM
+#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
+
+#define PHYS_TO_NID(addr)	(0)
+
+#else /* CONFIG_DISCONTIGMEM */
+
+/*
+ * This is more complex.  We have a set of mem_map arrays spread
+ * around in memory.
+ */
+#include <linux/numa.h>
+
+#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
+#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
+
+#define pfn_valid(pfn)						\
+	({							\
+		unsigned int nid = PFN_TO_NID(pfn);		\
+		int valid = nid < MAX_NUMNODES;			\
+		if (valid) {					\
+			pg_data_t *node = NODE_DATA(nid);	\
+			valid = (pfn - node->node_start_pfn) <	\
+				node->node_spanned_pages;	\
+		}						\
+		valid;						\
+	})
+
+#define virt_to_page(kaddr)					\
+	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
+
+#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
+
+/*
+ * Common discontigmem stuff.
+ *  PHYS_TO_NID is used by the ARM kernel/setup.c
+ */
+#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+#ifdef NODE_MEM_SIZE_BITS
+#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) \
+	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn) \
+	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
+
+#endif /* NODE_MEM_SIZE_BITS */
+
+#endif /* !CONFIG_DISCONTIGMEM */
+
+/*
+ * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * Optional coherency support.  Currently used only by selected
+ * Intel XSC3-based systems.
+ */
+#ifndef arch_is_coherent
+#define arch_is_coherent()		0
+#endif
+
+#endif
+
+#include <asm-generic/memory_model.h>
+
+#endif
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
new file mode 100644
index 00000000000..54570d2e95b
--- /dev/null
+++ b/arch/arm/include/asm/mman.h
@@ -0,0 +1,17 @@
+#ifndef __ARM_MMAN_H__
+#define __ARM_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __ARM_MMAN_H__ */
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
new file mode 100644
index 00000000000..53099d4ee42
--- /dev/null
+++ b/arch/arm/include/asm/mmu.h
@@ -0,0 +1,33 @@
+#ifndef __ARM_MMU_H
+#define __ARM_MMU_H
+
+#ifdef CONFIG_MMU
+
+typedef struct {
+#ifdef CONFIG_CPU_HAS_ASID
+	unsigned int id;
+#endif
+	unsigned int kvm_seq;
+} mm_context_t;
+
+#ifdef CONFIG_CPU_HAS_ASID
+#define ASID(mm)	((mm)->context.id & 255)
+#else
+#define ASID(mm)	(0)
+#endif
+
+#else
+
+/*
+ * From nommu.h:
+ *  Copyright (C) 2002, David McCullough <davidm@snapgear.com>
+ *  modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
+ */
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
new file mode 100644
index 00000000000..a301e446007
--- /dev/null
+++ b/arch/arm/include/asm/mmu_context.h
@@ -0,0 +1,117 @@
+/*
+ *  arch/arm/include/asm/mmu_context.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ASM_ARM_MMU_CONTEXT_H
+#define __ASM_ARM_MMU_CONTEXT_H
+
+#include <linux/compiler.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm-generic/mm_hooks.h>
+
+void __check_kvm_seq(struct mm_struct *mm);
+
+#ifdef CONFIG_CPU_HAS_ASID
+
+/*
+ * On ARMv6, we have the following structure in the Context ID:
+ *
+ * 31                         7          0
+ * +-------------------------+-----------+
+ * |      process ID         |   ASID    |
+ * +-------------------------+-----------+
+ * |              context ID             |
+ * +-------------------------------------+
+ *
+ * The ASID is used to tag entries in the CPU caches and TLBs.
+ * The context ID is used by debuggers and trace logic, and
+ * should be unique within all running processes.
+ */
+#define ASID_BITS		8
+#define ASID_MASK		((~0) << ASID_BITS)
+#define ASID_FIRST_VERSION	(1 << ASID_BITS)
+
+extern unsigned int cpu_last_asid;
+
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void __new_context(struct mm_struct *mm);
+
+static inline void check_context(struct mm_struct *mm)
+{
+	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
+		__new_context(mm);
+
+	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+		__check_kvm_seq(mm);
+}
+
+#define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
+
+#else
+
+static inline void check_context(struct mm_struct *mm)
+{
+	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+		__check_kvm_seq(mm);
+}
+
+#define init_new_context(tsk,mm)	0
+
+#endif
+
+#define destroy_context(mm)		do { } while(0)
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm:  describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned.  No registers are touched.  We avoid
+ * calling the CPU specific function when the mm hasn't
+ * actually changed.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+#ifdef CONFIG_MMU
+	unsigned int cpu = smp_processor_id();
+
+#ifdef CONFIG_SMP
+	/* check for possible thread migration */
+	if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+		__flush_icache_all();
+#endif
+	if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
+		check_context(next);
+		cpu_switch_mm(next->pgd, next);
+		if (cache_is_vivt())
+			cpu_clear(cpu, prev->cpu_vm_mask);
+	}
+#endif
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+#define activate_mm(prev,next)	switch_mm(prev, next, NULL)
+
+#endif
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
new file mode 100644
index 00000000000..ae63a4fd28c
--- /dev/null
+++ b/arch/arm/include/asm/mmzone.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/include/asm/mmzone.h
+ *
+ *  1999-12-29	Nicolas Pitre		Created
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_MMZONE_H
+#define __ASM_MMZONE_H
+
+/*
+ * Currently defined in arch/arm/mm/discontig.c
+ */
+extern pg_data_t discontig_node_data[];
+
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(&discontig_node_data[nid])
+
+/*
+ * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
+ */
+#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
+
+#include <mach/memory.h>
+
+#endif
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
new file mode 100644
index 00000000000..24b168dc31a
--- /dev/null
+++ b/arch/arm/include/asm/module.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_ARM_MODULE_H
+#define _ASM_ARM_MODULE_H
+
+struct mod_arch_specific
+{
+	int foo;
+};
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+
+/*
+ * Include the ARM architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC	"ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+#endif /* _ASM_ARM_MODULE_H */
diff --git a/arch/arm/include/asm/msgbuf.h b/arch/arm/include/asm/msgbuf.h
new file mode 100644
index 00000000000..33b35b946ea
--- /dev/null
+++ b/arch/arm/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASMARM_MSGBUF_H
+#define _ASMARM_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASMARM_MSGBUF_H */
diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h
new file mode 100644
index 00000000000..d8fbe2d9b8b
--- /dev/null
+++ b/arch/arm/include/asm/mtd-xip.h
@@ -0,0 +1,24 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARM_MTD_XIP_H__
+#define __ARM_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#include <mach/mtd-xip.h>
+
+/* fill instruction prefetch */
+#define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)
+
+#endif /* __ARM_MTD_XIP_H__ */
diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h
new file mode 100644
index 00000000000..93226cf23ae
--- /dev/null
+++ b/arch/arm/include/asm/mutex.h
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/include/asm/mutex.h
+ *
+ * ARM optimized mutex locking primitives
+ *
+ * Please look into asm-generic/mutex-xchg.h for a formal definition.
+ */
+#ifndef _ASM_MUTEX_H
+#define _ASM_MUTEX_H
+
+#if __LINUX_ARM_ARCH__ < 6
+/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */
+# include <asm-generic/mutex-xchg.h>
+#else
+
+/*
+ * Attempting to lock a mutex on ARMv6+ can be done with a bastardized
+ * atomic decrement (it is not a reliable atomic decrement but it satisfies
+ * the defined semantics for our purpose, while being smaller and faster
+ * than a real atomic decrement or atomic swap.  The idea is to attempt
+ * decrementing the lock value only once.  If once decremented it isn't zero,
+ * or if its store-back fails due to a dispute on the exclusive store, we
+ * simply bail out immediately through the slow path where the lock will be
+ * reattempted until it succeeds.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ (
+
+		"ldrex	%0, [%2]	\n\t"
+		"sub	%0, %0, #1	\n\t"
+		"strex	%1, %0, [%2]	"
+
+		: "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__res |= __ex_flag;
+	if (unlikely(__res != 0))
+		fail_fn(count);
+}
+
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ (
+
+		"ldrex	%0, [%2]	\n\t"
+		"sub	%0, %0, #1	\n\t"
+		"strex	%1, %0, [%2]	"
+
+		: "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__res |= __ex_flag;
+	if (unlikely(__res != 0))
+		__res = fail_fn(count);
+	return __res;
+}
+
+/*
+ * Same trick is used for the unlock fast path. However the original value,
+ * rather than the result, is used to test for success in order to have
+ * better generated assembly.
+ */
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res, __orig;
+
+	__asm__ (
+
+		"ldrex	%0, [%3]	\n\t"
+		"add	%1, %0, #1	\n\t"
+		"strex	%2, %1, [%3]	"
+
+		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__orig |= __ex_flag;
+	if (unlikely(__orig != 0))
+		fail_fn(count);
+}
+
+/*
+ * If the unlock was done on a contended lock, or if the unlock simply fails
+ * then the mutex remains locked.
+ */
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/*
+ * For __mutex_fastpath_trylock we use another construct which could be
+ * described as a "single value cmpxchg".
+ *
+ * This provides the needed trylock semantics like cmpxchg would, but it is
+ * lighter and less generic than a true cmpxchg implementation.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res, __orig;
+
+	__asm__ (
+
+		"1: ldrex	%0, [%3]	\n\t"
+		"subs		%1, %0, #1	\n\t"
+		"strexeq	%2, %1, [%3]	\n\t"
+		"movlt		%0, #0		\n\t"
+		"cmpeq		%2, #0		\n\t"
+		"bgt		1b		"
+
+		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&count->counter)
+		: "cc", "memory" );
+
+	return __orig;
+}
+
+#endif
+#endif
diff --git a/arch/arm/include/asm/nwflash.h b/arch/arm/include/asm/nwflash.h
new file mode 100644
index 00000000000..04e5a557a88
--- /dev/null
+++ b/arch/arm/include/asm/nwflash.h
@@ -0,0 +1,9 @@
+#ifndef _FLASH_H
+#define _FLASH_H
+
+#define FLASH_MINOR		 160	/* MAJOR is 10 - miscdevice */
+#define CMD_WRITE_DISABLE	 0
+#define CMD_WRITE_ENABLE	 0x28
+#define CMD_WRITE_BASE64K_ENABLE 0x47
+
+#endif /* _FLASH_H */
diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
new file mode 100644
index 00000000000..3574c0deb37
--- /dev/null
+++ b/arch/arm/include/asm/page-nommu.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/include/asm/page-nommu.h
+ *
+ *  Copyright (C) 2004 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASMARM_PAGE_NOMMU_H
+#define _ASMARM_PAGE_NOMMU_H
+
+#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13
+#define KTHREAD_SIZE (8192)
+#else
+#define KTHREAD_SIZE PAGE_SIZE
+#endif
+ 
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t[2];
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	((x)[0])
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgprot(x)     (x)
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
new file mode 100644
index 00000000000..cf2e2680daa
--- /dev/null
+++ b/arch/arm/include/asm/page.h
@@ -0,0 +1,199 @@
+/*
+ *  arch/arm/include/asm/page.h
+ *
+ *  Copyright (C) 1995-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PAGE_H
+#define _ASMARM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT		12
+#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_MMU
+
+#include "page-nommu.h"
+
+#else
+
+#include <asm/glue.h>
+
+/*
+ *	User Space Model
+ *	================
+ *
+ *	This section selects the correct set of functions for dealing with
+ *	page-based copying and clearing for user space for the particular
+ *	processor(s) we're building for.
+ *
+ *	We have the following to choose from:
+ *	  v3		- ARMv3
+ *	  v4wt		- ARMv4 with writethrough cache, without minicache
+ *	  v4wb		- ARMv4 with writeback cache, without minicache
+ *	  v4_mc		- ARMv4 with minicache
+ *	  xscale	- Xscale
+ *	  xsc3		- XScalev3
+ */
+#undef _USER
+#undef MULTI_USER
+
+#ifdef CONFIG_CPU_COPY_V3
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v3
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V4WT
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4wt
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V4WB
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4wb
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_FEROCEON
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER feroceon
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER xscale_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER xsc3_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V6
+# define MULTI_USER 1
+#endif
+
+#if !defined(_USER) && !defined(MULTI_USER)
+#error Unknown user operations model
+#endif
+
+struct cpu_user_fns {
+	void (*cpu_clear_user_page)(void *p, unsigned long user);
+	void (*cpu_copy_user_page)(void *to, const void *from,
+				   unsigned long user);
+};
+
+#ifdef MULTI_USER
+extern struct cpu_user_fns cpu_user;
+
+#define __cpu_clear_user_page	cpu_user.cpu_clear_user_page
+#define __cpu_copy_user_page	cpu_user.cpu_copy_user_page
+
+#else
+
+#define __cpu_clear_user_page	__glue(_USER,_clear_user_page)
+#define __cpu_copy_user_page	__glue(_USER,_copy_user_page)
+
+extern void __cpu_clear_user_page(void *p, unsigned long user);
+extern void __cpu_copy_user_page(void *to, const void *from,
+				 unsigned long user);
+#endif
+
+#define clear_user_page(addr,vaddr,pg)	 __cpu_clear_user_page(addr, vaddr)
+#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
+
+#define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
+extern void copy_page(void *to, const void *from);
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd[2]; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd[0])
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t[2];
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	((x)[0])
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+#endif /* CONFIG_MMU */
+
+typedef struct page *pgtable_t;
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
+#include <asm-generic/page.h>
+
+#endif
diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h
new file mode 100644
index 00000000000..8b24bf94c06
--- /dev/null
+++ b/arch/arm/include/asm/param.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/include/asm/param.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PARAM_H
+#define __ASM_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#else
+# define HZ		100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+/* max length of hostname */
+#define MAXHOSTNAMELEN  64
+
+#endif
+
diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h
new file mode 100644
index 00000000000..26e94b09035
--- /dev/null
+++ b/arch/arm/include/asm/parport.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/include/asm/parport.h: ARM-specific parport initialisation
+ *
+ *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef __ASMARM_PARPORT_H
+#define __ASMARM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
new file mode 100644
index 00000000000..918d0cbbf06
--- /dev/null
+++ b/arch/arm/include/asm/pci.h
@@ -0,0 +1,91 @@
+#ifndef ASMARM_PCI_H
+#define ASMARM_PCI_H
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
+
+#define pcibios_scan_all_fns(a, b)	0
+
+#ifdef CONFIG_PCI_HOST_ITE8152
+/* ITE bridge requires setting latency timer to avoid early bus access
+   termination by PIC bus mater devices
+*/
+extern void pcibios_set_master(struct pci_dev *dev);
+#else
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+#endif
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+/*
+ * Whether pci_unmap_{single,page} is a nop depends upon the
+ * configuration.
+ */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                               enum pci_mmap_state mmap_state, int write_combine);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			 struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+/*
+ * Dummy implementation; always return 0.
+ */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+ 
+#endif
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
new file mode 100644
index 00000000000..b4e32d8ec07
--- /dev/null
+++ b/arch/arm/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARM_PERCPU
+#define __ARM_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
new file mode 100644
index 00000000000..3dcd64bf182
--- /dev/null
+++ b/arch/arm/include/asm/pgalloc.h
@@ -0,0 +1,136 @@
+/*
+ *  arch/arm/include/asm/pgalloc.h
+ *
+ *  Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGALLOC_H
+#define _ASMARM_PGALLOC_H
+
+#include <asm/domain.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#define check_pgt_cache()		do { } while (0)
+
+#ifdef CONFIG_MMU
+
+#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
+#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
+
+/*
+ * Since we have only two-level page tables, these are trivial
+ */
+#define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(mm, pmd)		do { } while (0)
+#define pgd_populate(mm,pmd,pte)	BUG()
+
+extern pgd_t *get_pgd_slow(struct mm_struct *mm);
+extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
+
+#define pgd_alloc(mm)			get_pgd_slow(mm)
+#define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
+
+/*
+ * Allocate one PTE table.
+ *
+ * This actually allocates two hardware PTE tables, but we wrap this up
+ * into one table thus:
+ *
+ *  +------------+
+ *  |  h/w pt 0  |
+ *  +------------+
+ *  |  h/w pt 1  |
+ *  +------------+
+ *  | Linux pt 0 |
+ *  +------------+
+ *  | Linux pt 1 |
+ *  +------------+
+ */
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte;
+
+	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	if (pte) {
+		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
+		pte += PTRS_PER_PTE;
+	}
+
+	return pte;
+}
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+	if (pte) {
+		void *page = page_address(pte);
+		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		pgtable_page_ctor(pte);
+	}
+
+	return pte;
+}
+
+/*
+ * Free one PTE table.
+ */
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	if (pte) {
+		pte -= PTRS_PER_PTE;
+		free_page((unsigned long)pte);
+	}
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_page(pte);
+}
+
+static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
+{
+	pmdp[0] = __pmd(pmdval);
+	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+	flush_pmd_entry(pmdp);
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte.  This pmd is part
+ * of the mm address space.
+ *
+ * Ensure that we always set both PMD entries.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+	unsigned long pte_ptr = (unsigned long)ptep;
+
+	/*
+	 * The pmd must be loaded with the physical
+	 * address of the PTE table
+	 */
+	pte_ptr -= PTRS_PER_PTE * sizeof(void *);
+	__pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
+{
+	__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif /* CONFIG_MMU */
+
+#endif
diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h
new file mode 100644
index 00000000000..fd1521d5cb9
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-hwdef.h
@@ -0,0 +1,90 @@
+/*
+ *  arch/arm/include/asm/pgtable-hwdef.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_HWDEF_H
+#define _ASMARM_PGTABLE_HWDEF_H
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1 descriptor (PMD)
+ *   - common
+ */
+#define PMD_TYPE_MASK		(3 << 0)
+#define PMD_TYPE_FAULT		(0 << 0)
+#define PMD_TYPE_TABLE		(1 << 0)
+#define PMD_TYPE_SECT		(2 << 0)
+#define PMD_BIT4		(1 << 4)
+#define PMD_DOMAIN(x)		((x) << 5)
+#define PMD_PROTECTION		(1 << 9)	/* v5 */
+/*
+ *   - section
+ */
+#define PMD_SECT_BUFFERABLE	(1 << 2)
+#define PMD_SECT_CACHEABLE	(1 << 3)
+#define PMD_SECT_XN		(1 << 4)	/* v6 */
+#define PMD_SECT_AP_WRITE	(1 << 10)
+#define PMD_SECT_AP_READ	(1 << 11)
+#define PMD_SECT_TEX(x)		((x) << 12)	/* v5 */
+#define PMD_SECT_APX		(1 << 15)	/* v6 */
+#define PMD_SECT_S		(1 << 16)	/* v6 */
+#define PMD_SECT_nG		(1 << 17)	/* v6 */
+#define PMD_SECT_SUPER		(1 << 18)	/* v6 */
+
+#define PMD_SECT_UNCACHED	(0)
+#define PMD_SECT_BUFFERED	(PMD_SECT_BUFFERABLE)
+#define PMD_SECT_WT		(PMD_SECT_CACHEABLE)
+#define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
+#define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
+
+/*
+ *   - coarse table (not used)
+ */
+
+/*
+ * + Level 2 descriptor (PTE)
+ *   - common
+ */
+#define PTE_TYPE_MASK		(3 << 0)
+#define PTE_TYPE_FAULT		(0 << 0)
+#define PTE_TYPE_LARGE		(1 << 0)
+#define PTE_TYPE_SMALL		(2 << 0)
+#define PTE_TYPE_EXT		(3 << 0)	/* v5 */
+#define PTE_BUFFERABLE		(1 << 2)
+#define PTE_CACHEABLE		(1 << 3)
+
+/*
+ *   - extended small page/tiny page
+ */
+#define PTE_EXT_XN		(1 << 0)	/* v6 */
+#define PTE_EXT_AP_MASK		(3 << 4)
+#define PTE_EXT_AP0		(1 << 4)
+#define PTE_EXT_AP1		(2 << 4)
+#define PTE_EXT_AP_UNO_SRO	(0 << 4)
+#define PTE_EXT_AP_UNO_SRW	(PTE_EXT_AP0)
+#define PTE_EXT_AP_URO_SRW	(PTE_EXT_AP1)
+#define PTE_EXT_AP_URW_SRW	(PTE_EXT_AP1|PTE_EXT_AP0)
+#define PTE_EXT_TEX(x)		((x) << 6)	/* v5 */
+#define PTE_EXT_APX		(1 << 9)	/* v6 */
+#define PTE_EXT_COHERENT	(1 << 9)	/* XScale3 */
+#define PTE_EXT_SHARED		(1 << 10)	/* v6 */
+#define PTE_EXT_NG		(1 << 11)	/* v6 */
+
+/*
+ *   - small page
+ */
+#define PTE_SMALL_AP_MASK	(0xff << 4)
+#define PTE_SMALL_AP_UNO_SRO	(0x00 << 4)
+#define PTE_SMALL_AP_UNO_SRW	(0x55 << 4)
+#define PTE_SMALL_AP_URO_SRW	(0xaa << 4)
+#define PTE_SMALL_AP_URW_SRW	(0xff << 4)
+
+#endif
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
new file mode 100644
index 00000000000..b011f2e939a
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -0,0 +1,118 @@
+/*
+ *  arch/arm/include/asm/pgtable-nommu.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 2004  Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_NOMMU_H
+#define _ASMARM_PGTABLE_NOMMU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *)0)
+/* FIXME */
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PGDIR_SHIFT		21
+
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+/* FIXME */
+
+#define PAGE_NONE	__pgprot(0)
+#define PAGE_SHARED	__pgprot(0)
+#define PAGE_COPY	__pgprot(0)
+#define PAGE_READONLY	__pgprot(0)
+#define PAGE_KERNEL	__pgprot(0)
+
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+
+typedef pte_t *pte_addr_t;
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot)	__pgprot(0)
+#define pgprot_writecombine(prot) __pgprot(0)
+
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+#define io_remap_page_range	remap_page_range
+#define io_remap_pfn_range	remap_pfn_range
+
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#define FIRST_USER_ADDRESS      (0)
+
+#include <asm-generic/pgtable.h>
+
+#else 
+
+/*
+ * dummy tlb and user structures.
+ */
+#define v3_tlb_fns	(0)
+#define v4_tlb_fns	(0)
+#define v4wb_tlb_fns	(0)
+#define v4wbi_tlb_fns	(0)
+#define v6wbi_tlb_fns	(0)
+#define v7wbi_tlb_fns	(0)
+
+#define v3_user_fns	(0)
+#define v4_user_fns	(0)
+#define v4_mc_user_fns	(0)
+#define v4wb_user_fns	(0)
+#define v4wt_user_fns	(0)
+#define v6_user_fns	(0)
+#define xscale_mc_user_fns (0)
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
new file mode 100644
index 00000000000..8e21ef15bd7
--- /dev/null
+++ b/arch/arm/include/asm/pgtable.h
@@ -0,0 +1,401 @@
+/*
+ *  arch/arm/include/asm/pgtable.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_H
+#define _ASMARM_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+#include <asm/proc-fns.h>
+
+#ifndef CONFIG_MMU
+
+#include "pgtable-nommu.h"
+
+#else
+
+#include <asm/memory.h>
+#include <mach/vmalloc.h>
+#include <asm/pgtable-hwdef.h>
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * Note that platforms may override VMALLOC_START, but they must provide
+ * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
+ * which may not overlap IO space.
+ */
+#ifndef VMALLOC_START
+#define VMALLOC_OFFSET		(8*1024*1024)
+#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#endif
+
+/*
+ * Hardware-wise, we have a two level page table structure, where the first
+ * level has 4096 entries, and the second level has 256 entries.  Each entry
+ * is one 32-bit word.  Most of the bits in the second level entry are used
+ * by hardware, and there aren't any "accessed" and "dirty" bits.
+ *
+ * Linux on the other hand has a three level page table structure, which can
+ * be wrapped to fit a two level page table structure easily - using the PGD
+ * and PTE only.  However, Linux also expects one "PTE" table per page, and
+ * at least a "dirty" bit.
+ *
+ * Therefore, we tweak the implementation slightly - we tell Linux that we
+ * have 2048 entries in the first level, each of which is 8 bytes (iow, two
+ * hardware pointers to the second level.)  The second level contains two
+ * hardware PTE tables arranged contiguously, followed by Linux versions
+ * which contain the state information Linux needs.  We, therefore, end up
+ * with 512 entries in the "PTE" level.
+ *
+ * This leads to the page tables having the following layout:
+ *
+ *    pgd             pte
+ * |        |
+ * +--------+ +0
+ * |        |-----> +------------+ +0
+ * +- - - - + +4    |  h/w pt 0  |
+ * |        |-----> +------------+ +1024
+ * +--------+ +8    |  h/w pt 1  |
+ * |        |       +------------+ +2048
+ * +- - - - +       | Linux pt 0 |
+ * |        |       +------------+ +3072
+ * +--------+       | Linux pt 1 |
+ * |        |       +------------+ +4096
+ *
+ * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
+ * PTE_xxx for definitions of bits appearing in the "h/w pt".
+ *
+ * PMD_xxx definitions refer to bits in the first level page table.
+ *
+ * The "dirty" bit is emulated by only granting hardware write permission
+ * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
+ * means that a write to a clean page will cause a permission fault, and
+ * the Linux MM layer will mark the page dirty via handle_pte_fault().
+ * For the hardware to notice the permission change, the TLB entry must
+ * be flushed, and ptep_set_access_flags() does that for us.
+ *
+ * The "accessed" or "young" bit is emulated by a similar method; we only
+ * allow accesses to the page if the "young" bit is set.  Accesses to the
+ * page will cause a fault, and handle_pte_fault() will set the young bit
+ * for us as long as the page is marked present in the corresponding Linux
+ * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
+ * up to date.
+ *
+ * However, when the "young" bit is cleared, we deny access to the page
+ * by clearing the hardware PTE.  Currently Linux does not flush the TLB
+ * for us in this case, which means the TLB will retain the transation
+ * until either the TLB entry is evicted under pressure, or a context
+ * switch which changes the user space mapping occurs.
+ */
+#define PTRS_PER_PTE		512
+#define PTRS_PER_PMD		1
+#define PTRS_PER_PGD		2048
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PMD_SHIFT		21
+#define PGDIR_SHIFT		21
+
+#define LIBRARY_TEXT_START	0x0c000000
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pmd_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
+#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
+#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+#endif /* !__ASSEMBLY__ */
+
+#define PMD_SIZE		(1UL << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE-1))
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+/*
+ * This is the lowest virtual address we can permit any user space
+ * mapping to be mapped at.  This is particularly important for
+ * non-high vector CPUs.
+ */
+#define FIRST_USER_ADDRESS	PAGE_SIZE
+
+#define FIRST_USER_PGD_NR	1
+#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT		20
+#define SECTION_SIZE		(1UL << SECTION_SHIFT)
+#define SECTION_MASK		(~(SECTION_SIZE-1))
+
+/*
+ * ARMv6 supersection address mask and size definitions.
+ */
+#define SUPERSECTION_SHIFT	24
+#define SUPERSECTION_SIZE	(1UL << SUPERSECTION_SHIFT)
+#define SUPERSECTION_MASK	(~(SUPERSECTION_SIZE-1))
+
+/*
+ * "Linux" PTE definitions.
+ *
+ * We keep two sets of PTEs - the hardware and the linux version.
+ * This allows greater flexibility in the way we map the Linux bits
+ * onto the hardware tables, and allows us to have YOUNG and DIRTY
+ * bits.
+ *
+ * The PTE table pointer refers to the hardware entries; the "Linux"
+ * entries are stored 1024 bytes below.
+ */
+#define L_PTE_PRESENT		(1 << 0)
+#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
+#define L_PTE_YOUNG		(1 << 1)
+#define L_PTE_BUFFERABLE	(1 << 2)	/* matches PTE */
+#define L_PTE_CACHEABLE		(1 << 3)	/* matches PTE */
+#define L_PTE_USER		(1 << 4)
+#define L_PTE_WRITE		(1 << 5)
+#define L_PTE_EXEC		(1 << 6)
+#define L_PTE_DIRTY		(1 << 7)
+#define L_PTE_SHARED		(1 << 10)	/* shared(v6), coherent(xsc3) */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The pgprot_* and protection_map entries will be fixed up in runtime
+ * to include the cachable and bufferable bits based on memory policy,
+ * as well as any architecture dependent bits like global/ASID and SMP
+ * shared mapping bits.
+ */
+#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
+#define _L_PTE_READ	L_PTE_USER | L_PTE_EXEC
+
+extern pgprot_t		pgprot_user;
+extern pgprot_t		pgprot_kernel;
+
+#define PAGE_NONE	pgprot_user
+#define PAGE_COPY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
+#define PAGE_SHARED	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
+				 L_PTE_WRITE)
+#define PAGE_READONLY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
+#define PAGE_KERNEL	pgprot_kernel
+
+#define __PAGE_NONE	__pgprot(_L_PTE_DEFAULT)
+#define __PAGE_COPY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define __PAGE_SHARED	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
+#define __PAGE_READONLY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version.  These get translated into the best that the
+ * architecture can perform.  Note that on most ARM hardware:
+ *  1) We cannot do execute protection
+ *  2) If we could do execute protection, then read is implied
+ *  3) write implies read permissions
+ */
+#define __P000  __PAGE_NONE
+#define __P001  __PAGE_READONLY
+#define __P010  __PAGE_COPY
+#define __P011  __PAGE_COPY
+#define __P100  __PAGE_READONLY
+#define __P101  __PAGE_READONLY
+#define __P110  __PAGE_COPY
+#define __P111  __PAGE_COPY
+
+#define __S000  __PAGE_NONE
+#define __S001  __PAGE_READONLY
+#define __S010  __PAGE_SHARED
+#define __S011  __PAGE_SHARED
+#define __S100  __PAGE_READONLY
+#define __S101  __PAGE_READONLY
+#define __S110  __PAGE_SHARED
+#define __S111  __PAGE_SHARED
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
+#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
+#define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#define set_pte_at(mm,addr,ptep,pteval) do { \
+	set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
+ } while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_special(pte)	(0)
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
+#define PTE_BIT_FUNC(fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
+PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
+PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
+PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
+PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
+PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define pmd_present(pmd)	(pmd_val(pmd))
+#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		pmdpd[0] = pmdps[0];	\
+		pmdpd[1] = pmdps[1];	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		pmdp[0] = __pmd(0);	\
+		pmdp[1] = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+static inline pte_t *pmd_page_vaddr(pmd_t pmd)
+{
+	unsigned long ptr;
+
+	ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
+	ptr += PTRS_PER_PTE * sizeof(void *);
+
+	return __va(ptr);
+}
+
+#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+
+/*
+ * Permanent address of a page. We never have highmem, so this is trivial.
+ */
+#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_present(pgd)	(1)
+#define pgd_clear(pgdp)		do { } while (0)
+#define set_pgd(pgd,pgdp)	do { } while (0)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir, addr)	((pmd_t *)(dir))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
+	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* Encode and decode a swap entry.
+ *
+ * We support up to 32GB of swap on 4k machines
+ */
+#define __swp_type(x)		(((x).val >> 2) & 0x7f)
+#define __swp_offset(x)		((x).val >> 9)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr)	(1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own arch_get_unmapped_area to cope with VIPT caches.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+		remap_pfn_range(vma, from, pfn, size, prot)
+
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/arch/arm/include/asm/poll.h b/arch/arm/include/asm/poll.h
new file mode 100644
index 00000000000..c98509d3149
--- /dev/null
+++ b/arch/arm/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
new file mode 100644
index 00000000000..2446d23bfdb
--- /dev/null
+++ b/arch/arm/include/asm/posix_types.h
@@ -0,0 +1,77 @@
+/*
+ *  arch/arm/include/asm/posix_types.h
+ *
+ *  Copyright (C) 1996-1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ARCH_ARM_POSIX_TYPES_H
+#define __ARCH_ARM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned short		__kernel_uid_t;
+typedef unsigned short		__kernel_gid_t;
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+typedef long			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_timer_t;
+typedef int			__kernel_clockid_t;
+typedef int			__kernel_daddr_t;
+typedef char *			__kernel_caddr_t;
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+typedef unsigned short		__kernel_old_uid_t;
+typedef unsigned short		__kernel_old_gid_t;
+typedef unsigned short		__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef	__FD_SET
+#define __FD_SET(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fdsetp) \
+		((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) \
+		(memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp))))
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
new file mode 100644
index 00000000000..db80203b68e
--- /dev/null
+++ b/arch/arm/include/asm/proc-fns.h
@@ -0,0 +1,241 @@
+/*
+ *  arch/arm/include/asm/proc-fns.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCFNS_H
+#define __ASM_PROCFNS_H
+
+#ifdef __KERNEL__
+
+
+/*
+ * Work out if we need multiple CPU support
+ */
+#undef MULTI_CPU
+#undef CPU_NAME
+
+/*
+ * CPU_NAME - the prefix for CPU related functions
+ */
+
+#ifdef CONFIG_CPU_32
+# ifdef CONFIG_CPU_ARM610
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm6
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM7TDMI
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm7tdmi
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM710
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm7
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM720T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm720
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM740T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm740
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM9TDMI
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm9tdmi
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM920T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm920
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM922T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm922
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM925T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm925
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM926T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm926
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM940T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm940
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM946E
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm946
+#  endif
+# endif
+# ifdef CONFIG_CPU_SA110
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_sa110
+#  endif
+# endif
+# ifdef CONFIG_CPU_SA1100
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_sa1100
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1020
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1020
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1020E
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1020e
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1022
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1022
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1026
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1026
+#  endif
+# endif
+# ifdef CONFIG_CPU_XSCALE
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_xscale
+#  endif
+# endif
+# ifdef CONFIG_CPU_XSC3
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_xsc3
+#  endif
+# endif
+# ifdef CONFIG_CPU_FEROCEON
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_feroceon
+#  endif
+# endif
+# ifdef CONFIG_CPU_V6
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_v6
+#  endif
+# endif
+# ifdef CONFIG_CPU_V7
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_v7
+#  endif
+# endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifndef MULTI_CPU
+#include <asm/cpu-single.h>
+#else
+#include <asm/cpu-multi32.h>
+#endif
+
+#include <asm/memory.h>
+
+#ifdef CONFIG_MMU
+
+#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
+
+#define cpu_get_pgd()	\
+	({						\
+		unsigned long pg;			\
+		__asm__("mrc	p15, 0, %0, c2, c0, 0"	\
+			 : "=r" (pg) : : "cc");		\
+		pg &= ~0x3fff;				\
+		(pgd_t *)phys_to_virt(pg);		\
+	})
+
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_PROCFNS_H */
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
new file mode 100644
index 00000000000..517a4d6ffc7
--- /dev/null
+++ b/arch/arm/include/asm/processor.h
@@ -0,0 +1,131 @@
+/*
+ *  arch/arm/include/asm/processor.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_PROCESSOR_H
+#define __ASM_ARM_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
+			 TASK_SIZE : TASK_SIZE_26)
+#define STACK_TOP_MAX	TASK_SIZE
+#endif
+
+union debug_insn {
+	u32	arm;
+	u16	thumb;
+};
+
+struct debug_entry {
+	u32			address;
+	union debug_insn	insn;
+};
+
+struct debug_info {
+	int			nsaved;
+	struct debug_entry	bp[2];
+};
+
+struct thread_struct {
+							/* fault info	  */
+	unsigned long		address;
+	unsigned long		trap_no;
+	unsigned long		error_code;
+							/* debugging	  */
+	struct debug_info	debug;
+};
+
+#define INIT_THREAD  {	}
+
+#ifdef CONFIG_MMU
+#define nommu_start_thread(regs) do { } while (0)
+#else
+#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data
+#endif
+
+#define start_thread(regs,pc,sp)					\
+({									\
+	unsigned long *stack = (unsigned long *)sp;			\
+	set_fs(USER_DS);						\
+	memzero(regs->uregs, sizeof(regs->uregs));			\
+	if (current->personality & ADDR_LIMIT_32BIT)			\
+		regs->ARM_cpsr = USR_MODE;				\
+	else								\
+		regs->ARM_cpsr = USR26_MODE;				\
+	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
+		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_pc = pc & ~1;		/* pc */			\
+	regs->ARM_sp = sp;		/* sp */			\
+	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
+	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
+	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
+	nommu_start_thread(regs);					\
+})
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax()			barrier()
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk)	task_pt_regs(tsk)->ARM_pc
+#define KSTK_ESP(tsk)	task_pt_regs(tsk)->ARM_sp
+
+/*
+ * Prefetching support - only ARMv5.
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *ptr)
+{
+	__asm__ __volatile__(
+		"pld\t%a0"
+		:
+		: "p" (ptr)
+		: "cc");
+}
+
+#define ARCH_HAS_PREFETCHW
+#define prefetchw(ptr)	prefetch(ptr)
+
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define spin_lock_prefetch(x) do { } while (0)
+
+#endif
+
+#endif
+
+#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/arch/arm/include/asm/procinfo.h b/arch/arm/include/asm/procinfo.h
new file mode 100644
index 00000000000..ca52e584ef7
--- /dev/null
+++ b/arch/arm/include/asm/procinfo.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/include/asm/procinfo.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCINFO_H
+#define __ASM_PROCINFO_H
+
+#ifdef __KERNEL__
+
+struct cpu_tlb_fns;
+struct cpu_user_fns;
+struct cpu_cache_fns;
+struct processor;
+
+/*
+ * Note!  struct processor is always defined if we're
+ * using MULTI_CPU, otherwise this entry is unused,
+ * but still exists.
+ *
+ * NOTE! The following structure is defined by assembly
+ * language, NOT C code.  For more information, check:
+ *  arch/arm/mm/proc-*.S and arch/arm/kernel/head.S
+ */
+struct proc_info_list {
+	unsigned int		cpu_val;
+	unsigned int		cpu_mask;
+	unsigned long		__cpu_mm_mmu_flags;	/* used by head.S */
+	unsigned long		__cpu_io_mmu_flags;	/* used by head.S */
+	unsigned long		__cpu_flush;		/* used by head.S */
+	const char		*arch_name;
+	const char		*elf_name;
+	unsigned int		elf_hwcap;
+	const char		*cpu_name;
+	struct processor	*proc;
+	struct cpu_tlb_fns	*tlb;
+	struct cpu_user_fns	*user;
+	struct cpu_cache_fns	*cache;
+};
+
+#else	/* __KERNEL__ */
+#include <asm/elf.h>
+#warning "Please include asm/elf.h instead"
+#endif	/* __KERNEL__ */
+#endif
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
new file mode 100644
index 00000000000..b415c0e8545
--- /dev/null
+++ b/arch/arm/include/asm/ptrace.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/include/asm/ptrace.h
+ *
+ *  Copyright (C) 1996-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_PTRACE_H
+#define __ASM_ARM_PTRACE_H
+
+#include <asm/hwcap.h>
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+/* PTRACE_ATTACH is 16 */
+/* PTRACE_DETACH is 17 */
+#define PTRACE_GETWMMXREGS	18
+#define PTRACE_SETWMMXREGS	19
+/* 20 is unused */
+#define PTRACE_OLDSETOPTIONS	21
+#define PTRACE_GET_THREAD_AREA	22
+#define PTRACE_SET_SYSCALL	23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETCRUNCHREGS	25
+#define PTRACE_SETCRUNCHREGS	26
+
+/*
+ * PSR bits
+ */
+#define USR26_MODE	0x00000000
+#define FIQ26_MODE	0x00000001
+#define IRQ26_MODE	0x00000002
+#define SVC26_MODE	0x00000003
+#define USR_MODE	0x00000010
+#define FIQ_MODE	0x00000011
+#define IRQ_MODE	0x00000012
+#define SVC_MODE	0x00000013
+#define ABT_MODE	0x00000017
+#define UND_MODE	0x0000001b
+#define SYSTEM_MODE	0x0000001f
+#define MODE32_BIT	0x00000010
+#define MODE_MASK	0x0000001f
+#define PSR_T_BIT	0x00000020
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_J_BIT	0x01000000
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+#define PCMASK		0
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.  Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+struct pt_regs {
+	long uregs[18];
+};
+
+#define ARM_cpsr	uregs[16]
+#define ARM_pc		uregs[15]
+#define ARM_lr		uregs[14]
+#define ARM_sp		uregs[13]
+#define ARM_ip		uregs[12]
+#define ARM_fp		uregs[11]
+#define ARM_r10		uregs[10]
+#define ARM_r9		uregs[9]
+#define ARM_r8		uregs[8]
+#define ARM_r7		uregs[7]
+#define ARM_r6		uregs[6]
+#define ARM_r5		uregs[5]
+#define ARM_r4		uregs[4]
+#define ARM_r3		uregs[3]
+#define ARM_r2		uregs[2]
+#define ARM_r1		uregs[1]
+#define ARM_r0		uregs[0]
+#define ARM_ORIG_r0	uregs[17]
+
+#ifdef __KERNEL__
+
+#define user_mode(regs)	\
+	(((regs)->ARM_cpsr & 0xf) == 0)
+
+#ifdef CONFIG_ARM_THUMB
+#define thumb_mode(regs) \
+	(((regs)->ARM_cpsr & PSR_T_BIT))
+#else
+#define thumb_mode(regs) (0)
+#endif
+
+#define isa_mode(regs) \
+	((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \
+	 (((regs)->ARM_cpsr & PSR_T_BIT) >> 5))
+
+#define processor_mode(regs) \
+	((regs)->ARM_cpsr & MODE_MASK)
+
+#define interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & PSR_F_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+	if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) {
+		regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
+		return 1;
+	}
+
+	/*
+	 * Force CPSR to something logical...
+	 */
+	regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT;
+	if (!(elf_hwcap & HWCAP_26BIT))
+		regs->ARM_cpsr |= USR_MODE;
+
+	return 0;
+}
+
+#define pc_pointer(v) \
+	((v) & ~PCMASK)
+
+#define instruction_pointer(regs) \
+	(pc_pointer((regs)->ARM_pc))
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#define predicate(x)		((x) & 0xf0000000)
+#define PREDICATE_ALWAYS	0xe0000000
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
diff --git a/arch/arm/include/asm/resource.h b/arch/arm/include/asm/resource.h
new file mode 100644
index 00000000000..734b581b5b6
--- /dev/null
+++ b/arch/arm/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_RESOURCE_H
+#define _ARM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
new file mode 100644
index 00000000000..ca0a37d0340
--- /dev/null
+++ b/arch/arm/include/asm/scatterlist.h
@@ -0,0 +1,27 @@
+#ifndef _ASMARM_SCATTERLIST_H
+#define _ASMARM_SCATTERLIST_H
+
+#include <asm/memory.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;		/* buffer offset		 */
+	dma_addr_t	dma_address;	/* dma address			 */
+	unsigned int	length;		/* length			 */
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h
new file mode 100644
index 00000000000..2b8c5160388
--- /dev/null
+++ b/arch/arm/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/arm/include/asm/segment.h b/arch/arm/include/asm/segment.h
new file mode 100644
index 00000000000..9e24c21f630
--- /dev/null
+++ b/arch/arm/include/asm/segment.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_ARM_SEGMENT_H
+#define __ASM_ARM_SEGMENT_H
+
+#define __KERNEL_CS   0x0
+#define __KERNEL_DS   0x0
+
+#define __USER_CS     0x1
+#define __USER_DS     0x1
+
+#endif /* __ASM_ARM_SEGMENT_H */
+
diff --git a/arch/arm/include/asm/sembuf.h b/arch/arm/include/asm/sembuf.h
new file mode 100644
index 00000000000..1c028395428
--- /dev/null
+++ b/arch/arm/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASMARM_SEMBUF_H
+#define _ASMARM_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASMARM_SEMBUF_H */
diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h
new file mode 100644
index 00000000000..ebb049091e2
--- /dev/null
+++ b/arch/arm/include/asm/serial.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/include/asm/serial.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   15-10-1996	RMK	Created
+ */
+
+#ifndef __ASM_SERIAL_H
+#define __ASM_SERIAL_H
+
+#define BASE_BAUD	(1843200 / 16)
+
+#endif
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
new file mode 100644
index 00000000000..7bbf105463f
--- /dev/null
+++ b/arch/arm/include/asm/setup.h
@@ -0,0 +1,226 @@
+/*
+ *  linux/include/asm/setup.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Structure passed to kernel to tell it about the
+ *  hardware it's running on.  See Documentation/arm/Setup
+ *  for more info.
+ */
+#ifndef __ASMARM_SETUP_H
+#define __ASMARM_SETUP_H
+
+#include <asm/types.h>
+
+#define COMMAND_LINE_SIZE 1024
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	__u32 size;
+	__u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	__u32 flags;		/* bit 0 = read-only */
+	__u32 pagesize;
+	__u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+
+struct tag_mem32 {
+	__u32	size;
+	__u32	start;	/* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT	0x54410003
+
+struct tag_videotext {
+	__u8		x;
+	__u8		y;
+	__u16		video_page;
+	__u8		video_mode;
+	__u8		video_cols;
+	__u16		video_ega_bx;
+	__u8		video_lines;
+	__u8		video_isvga;
+	__u16		video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK	0x54410004
+
+struct tag_ramdisk {
+	__u32 flags;	/* bit 0 = load, bit 1 = prompt */
+	__u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
+	__u32 start;	/* starting block of floppy-based RAM disk image */
+};
+
+/* describes where the compressed ramdisk image lives (virtual address) */
+/*
+ * this one accidentally used virtual addresses - as such,
+ * it's deprecated.
+ */
+#define ATAG_INITRD	0x54410005
+
+/* describes where the compressed ramdisk image lives (physical address) */
+#define ATAG_INITRD2	0x54420005
+
+struct tag_initrd {
+	__u32 start;	/* physical start address */
+	__u32 size;	/* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL	0x54410006
+
+struct tag_serialnr {
+	__u32 low;
+	__u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION	0x54410007
+
+struct tag_revision {
+	__u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB	0x54410008
+
+struct tag_videolfb {
+	__u16		lfb_width;
+	__u16		lfb_height;
+	__u16		lfb_depth;
+	__u16		lfb_linelength;
+	__u32		lfb_base;
+	__u32		lfb_size;
+	__u8		red_size;
+	__u8		red_pos;
+	__u8		green_size;
+	__u8		green_pos;
+	__u8		blue_size;
+	__u8		blue_pos;
+	__u8		rsvd_size;
+	__u8		rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410009
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* acorn RiscPC specific information */
+#define ATAG_ACORN	0x41000101
+
+struct tag_acorn {
+	__u32 memc_control_reg;
+	__u32 vram_pages;
+	__u8 sounddefault;
+	__u8 adfsdrives;
+};
+
+/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+#define ATAG_MEMCLK	0x41000402
+
+struct tag_memclk {
+	__u32 fmemclk;
+};
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core		core;
+		struct tag_mem32	mem;
+		struct tag_videotext	videotext;
+		struct tag_ramdisk	ramdisk;
+		struct tag_initrd	initrd;
+		struct tag_serialnr	serialnr;
+		struct tag_revision	revision;
+		struct tag_videolfb	videolfb;
+		struct tag_cmdline	cmdline;
+
+		/*
+		 * Acorn specific
+		 */
+		struct tag_acorn	acorn;
+
+		/*
+		 * DC21285 specific
+		 */
+		struct tag_memclk	memclk;
+	} u;
+};
+
+struct tagtable {
+	__u32 tag;
+	int (*parse)(const struct tag *);
+};
+
+#define tag_member_present(tag,member)				\
+	((unsigned long)(&((struct tag *)0L)->member + 1)	\
+		<= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((__u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)		\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+#ifdef __KERNEL__
+
+#define __tag __used __attribute__((__section__(".taglist.init")))
+#define __tagtable(tag, fn) \
+static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+/*
+ * Memory map description
+ */
+#ifdef CONFIG_ARCH_LH7A40X
+# define NR_BANKS 16
+#else
+# define NR_BANKS 8
+#endif
+
+struct membank {
+	unsigned long start;
+	unsigned long size;
+	int           node;
+};
+
+struct meminfo {
+	int nr_banks;
+	struct membank bank[NR_BANKS];
+};
+
+/*
+ * Early command line parameters.
+ */
+struct early_params {
+	const char *arg;
+	void (*fn)(char **p);
+};
+
+#define __early_param(name,fn)					\
+static struct early_params __early_##fn __used			\
+__attribute__((__section__(".early_param.init"))) = { name, fn }
+
+#endif  /*  __KERNEL__  */
+
+#endif
diff --git a/arch/arm/include/asm/shmbuf.h b/arch/arm/include/asm/shmbuf.h
new file mode 100644
index 00000000000..2e5c67ba1c9
--- /dev/null
+++ b/arch/arm/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASMARM_SHMBUF_H
+#define _ASMARM_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASMARM_SHMBUF_H */
diff --git a/arch/arm/include/asm/shmparam.h b/arch/arm/include/asm/shmparam.h
new file mode 100644
index 00000000000..a5223b3a9bf
--- /dev/null
+++ b/arch/arm/include/asm/shmparam.h
@@ -0,0 +1,16 @@
+#ifndef _ASMARM_SHMPARAM_H
+#define _ASMARM_SHMPARAM_H
+
+/*
+ * This should be the size of the virtually indexed cache/ways,
+ * or page size, whichever is greater since the cache aliases
+ * every size/ways bytes.
+ */
+#define	SHMLBA	(4 * PAGE_SIZE)		 /* attach addr a multiple of this */
+
+/*
+ * Enforce SHMLBA in shmat
+ */
+#define __ARCH_FORCE_SHMLBA
+
+#endif /* _ASMARM_SHMPARAM_H */
diff --git a/arch/arm/include/asm/sigcontext.h b/arch/arm/include/asm/sigcontext.h
new file mode 100644
index 00000000000..fc0b80b6a6f
--- /dev/null
+++ b/arch/arm/include/asm/sigcontext.h
@@ -0,0 +1,34 @@
+#ifndef _ASMARM_SIGCONTEXT_H
+#define _ASMARM_SIGCONTEXT_H
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+	unsigned long trap_no;
+	unsigned long error_code;
+	unsigned long oldmask;
+	unsigned long arm_r0;
+	unsigned long arm_r1;
+	unsigned long arm_r2;
+	unsigned long arm_r3;
+	unsigned long arm_r4;
+	unsigned long arm_r5;
+	unsigned long arm_r6;
+	unsigned long arm_r7;
+	unsigned long arm_r8;
+	unsigned long arm_r9;
+	unsigned long arm_r10;
+	unsigned long arm_fp;
+	unsigned long arm_ip;
+	unsigned long arm_sp;
+	unsigned long arm_lr;
+	unsigned long arm_pc;
+	unsigned long arm_cpsr;
+	unsigned long fault_address;
+};
+
+
+#endif
diff --git a/arch/arm/include/asm/siginfo.h b/arch/arm/include/asm/siginfo.h
new file mode 100644
index 00000000000..5e21852e603
--- /dev/null
+++ b/arch/arm/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _ASMARM_SIGINFO_H
+#define _ASMARM_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h
new file mode 100644
index 00000000000..d0fb487aba4
--- /dev/null
+++ b/arch/arm/include/asm/signal.h
@@ -0,0 +1,164 @@
+#ifndef _ASMARM_SIGNAL_H
+#define _ASMARM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+#define SIGSWI		32
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
+ *			is running in 26-bit.
+ * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_THIRTYTWO	0x02000000
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
new file mode 100644
index 00000000000..503843db156
--- /dev/null
+++ b/arch/arm/include/asm/sizes.h
@@ -0,0 +1,56 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Size definitions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h                       1
+
+/* handy sizes */
+#define SZ_16				0x00000010
+#define SZ_256				0x00000100
+#define SZ_512				0x00000200
+
+#define SZ_1K                           0x00000400
+#define SZ_4K                           0x00001000
+#define SZ_8K                           0x00002000
+#define SZ_16K                          0x00004000
+#define SZ_64K                          0x00010000
+#define SZ_128K                         0x00020000
+#define SZ_256K                         0x00040000
+#define SZ_512K                         0x00080000
+
+#define SZ_1M                           0x00100000
+#define SZ_2M                           0x00200000
+#define SZ_4M                           0x00400000
+#define SZ_8M                           0x00800000
+#define SZ_16M                          0x01000000
+#define SZ_32M                          0x02000000
+#define SZ_64M                          0x04000000
+#define SZ_128M                         0x08000000
+#define SZ_256M                         0x10000000
+#define SZ_512M                         0x20000000
+
+#define SZ_1G                           0x40000000
+#define SZ_2G                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
new file mode 100644
index 00000000000..727b5c042e5
--- /dev/null
+++ b/arch/arm/include/asm/smp.h
@@ -0,0 +1,147 @@
+/*
+ *  arch/arm/include/asm/smp.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_SMP_H
+#define __ASM_ARM_SMP_H
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/thread_info.h>
+
+#include <mach/smp.h>
+
+#ifndef CONFIG_SMP
+# error "<asm/smp.h> included in non-SMP build"
+#endif
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+/*
+ * at the moment, there's not a big penalty for changing CPUs
+ * (the >big< penalty is running SMP in the first place)
+ */
+#define PROC_CHANGE_PENALTY		15
+
+struct seq_file;
+
+/*
+ * generate IPI list text
+ */
+extern void show_ipi_list(struct seq_file *p);
+
+/*
+ * Called from assembly code, this handles an IPI.
+ */
+asmlinkage void do_IPI(struct pt_regs *regs);
+
+/*
+ * Setup the SMP cpu_possible_map
+ */
+extern void smp_init_cpus(void);
+
+/*
+ * Move global data into per-processor storage.
+ */
+extern void smp_store_cpu_info(unsigned int cpuid);
+
+/*
+ * Raise an IPI cross call on CPUs in callmap.
+ */
+extern void smp_cross_call(cpumask_t callmap);
+
+/*
+ * Broadcast a timer interrupt to the other CPUs.
+ */
+extern void smp_send_timer(void);
+
+/*
+ * Broadcast a clock event to other CPUs.
+ */
+extern void smp_timer_broadcast(cpumask_t mask);
+
+/*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+extern int boot_secondary(unsigned int cpu, struct task_struct *);
+
+/*
+ * Called from platform specific assembly code, this is the
+ * secondary CPU entry point.
+ */
+asmlinkage void secondary_start_kernel(void);
+
+/*
+ * Perform platform specific initialisation of the specified CPU.
+ */
+extern void platform_secondary_init(unsigned int cpu);
+
+/*
+ * Initial data for bringing up a secondary CPU.
+ */
+struct secondary_data {
+	unsigned long pgdir;
+	void *stack;
+};
+extern struct secondary_data secondary_data;
+
+extern int __cpu_disable(void);
+extern int mach_cpu_disable(unsigned int cpu);
+
+extern void __cpu_die(unsigned int cpu);
+extern void cpu_die(void);
+
+extern void platform_cpu_die(unsigned int cpu);
+extern int platform_cpu_kill(unsigned int cpu);
+extern void platform_cpu_enable(unsigned int cpu);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ * Local timer interrupt handling function (can be IPI'ed).
+ */
+extern void local_timer_interrupt(void);
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+/*
+ * Stop a local timer interrupt.
+ */
+extern void local_timer_stop(unsigned int cpu);
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ
+ */
+extern int local_timer_ack(void);
+
+#else
+
+static inline void local_timer_stop(unsigned int cpu)
+{
+}
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+extern void local_timer_setup(unsigned int cpu);
+
+/*
+ * show local interrupt info
+ */
+extern void show_local_irqs(struct seq_file *);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
new file mode 100644
index 00000000000..6817be9573a
--- /dev/null
+++ b/arch/arm/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef _ASMARM_SOCKET_H
+#define _ASMARM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/sockios.h b/arch/arm/include/asm/sockios.h
new file mode 100644
index 00000000000..a2588a2512d
--- /dev/null
+++ b/arch/arm/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ARCH_ARM_SOCKIOS_H
+#define __ARCH_ARM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif
diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
new file mode 100644
index 00000000000..277158191a0
--- /dev/null
+++ b/arch/arm/include/asm/sparsemem.h
@@ -0,0 +1,10 @@
+#ifndef ASMARM_SPARSEMEM_H
+#define ASMARM_SPARSEMEM_H
+
+#include <asm/memory.h>
+
+#define MAX_PHYSADDR_BITS	32
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	NODE_MEM_SIZE_BITS
+
+#endif
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
new file mode 100644
index 00000000000..2b41ebbfa7f
--- /dev/null
+++ b/arch/arm/include/asm/spinlock.h
@@ -0,0 +1,224 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#if __LINUX_ARM_ARCH__ < 6
+#error SMP not supported on pre-ARMv6 CPUs
+#endif
+
+/*
+ * ARMv6 Spin-locking.
+ *
+ * We exclusively read the old value.  If it is zero, we may have
+ * won the lock, so we try exclusively storing it.  A memory barrier
+ * is required after we get a lock, and before we release it, because
+ * V6 CPUs are assumed to have weakly ordered memory.
+ *
+ * Unlocked value: 0
+ * Locked value: 1
+ */
+
+#define __raw_spin_is_locked(x)		((x)->lock != 0)
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfene\n"
+#endif
+"	strexeq	%0, %2, [%1]\n"
+"	teqeq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&lock->lock), "r" (1)
+	: "cc");
+
+	smp_mb();
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+"	strexeq	%0, %2, [%1]"
+	: "=&r" (tmp)
+	: "r" (&lock->lock), "r" (1)
+	: "cc");
+
+	if (tmp == 0) {
+		smp_mb();
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	smp_mb();
+
+	__asm__ __volatile__(
+"	str	%1, [%0]\n"
+#ifdef CONFIG_CPU_32v6K
+"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
+"	sev"
+#endif
+	:
+	: "r" (&lock->lock), "r" (0)
+	: "cc");
+}
+
+/*
+ * RWLOCKS
+ *
+ *
+ * Write locks are easy - we just set bit 31.  When unlocking, we can
+ * just write zero since the lock is exclusively held.
+ */
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfene\n"
+#endif
+"	strexeq	%0, %2, [%1]\n"
+"	teq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&rw->lock), "r" (0x80000000)
+	: "cc");
+
+	smp_mb();
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+"	strexeq	%0, %2, [%1]"
+	: "=&r" (tmp)
+	: "r" (&rw->lock), "r" (0x80000000)
+	: "cc");
+
+	if (tmp == 0) {
+		smp_mb();
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	smp_mb();
+
+	__asm__ __volatile__(
+	"str	%1, [%0]\n"
+#ifdef CONFIG_CPU_32v6K
+"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
+"	sev\n"
+#endif
+	:
+	: "r" (&rw->lock), "r" (0)
+	: "cc");
+}
+
+/* write_can_lock - would write_trylock() succeed? */
+#define __raw_write_can_lock(x)		((x)->lock == 0)
+
+/*
+ * Read locks are a bit more hairy:
+ *  - Exclusively load the lock value.
+ *  - Increment it.
+ *  - Store new lock value if positive, and we still own this location.
+ *    If the value is negative, we've already failed.
+ *  - If we failed to store the value, we want a negative result.
+ *  - If we failed, try again.
+ * Unlocking is similarly hairy.  We may have multiple read locks
+ * currently active.  However, we know we won't have any write
+ * locks.
+ */
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, tmp2;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	adds	%0, %0, #1\n"
+"	strexpl	%1, %0, [%2]\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfemi\n"
+#endif
+"	rsbpls	%0, %1, #0\n"
+"	bmi	1b"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc");
+
+	smp_mb();
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, tmp2;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, #1\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+#ifdef CONFIG_CPU_32v6K
+"\n	cmp	%0, #0\n"
+"	mcreq   p15, 0, %0, c7, c10, 4\n"
+"	seveq"
+#endif
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, tmp2 = 1;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	adds	%0, %0, #1\n"
+"	strexpl	%1, %0, [%2]\n"
+	: "=&r" (tmp), "+r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc");
+
+	smp_mb();
+	return tmp2 == 0;
+}
+
+/* read_can_lock - would read_trylock() succeed? */
+#define __raw_read_can_lock(x)		((x)->lock < 0x80000000)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..43e83f6d2ee
--- /dev/null
+++ b/arch/arm/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/arm/include/asm/stat.h b/arch/arm/include/asm/stat.h
new file mode 100644
index 00000000000..42c0c13999d
--- /dev/null
+++ b/arch/arm/include/asm/stat.h
@@ -0,0 +1,87 @@
+#ifndef _ASMARM_STAT_H
+#define _ASMARM_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#define STAT_HAVE_NSEC 
+
+struct stat {
+#if defined(__ARMEB__)
+	unsigned short st_dev;
+	unsigned short __pad1;
+#else
+	unsigned long  st_dev;
+#endif
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+#if defined(__ARMEB__)
+	unsigned short st_rdev;
+	unsigned short __pad2;
+#else
+	unsigned long  st_rdev;
+#endif
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ * Note: The kernel zero's the padded region because glibc might read them
+ * in the hope that the kernel has stretched to using larger sizes.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char   __pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif
diff --git a/arch/arm/include/asm/statfs.h b/arch/arm/include/asm/statfs.h
new file mode 100644
index 00000000000..a02e6a8c3d7
--- /dev/null
+++ b/arch/arm/include/asm/statfs.h
@@ -0,0 +1,42 @@
+#ifndef _ASMARM_STATFS_H
+#define _ASMARM_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+# include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+struct statfs {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u32 f_blocks;
+	__u32 f_bfree;
+	__u32 f_bavail;
+	__u32 f_files;
+	__u32 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+/*
+ * With EABI there is 4 bytes of padding added to this structure.
+ * Let's pack it so the padding goes away to simplify dual ABI support.
+ * Note that user space does NOT have to pack this structure.
+ */
+struct statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+} __attribute__ ((packed,aligned(4)));
+
+#endif
diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h
new file mode 100644
index 00000000000..e50c4a39b69
--- /dev/null
+++ b/arch/arm/include/asm/string.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_ARM_STRING_H
+#define __ASM_ARM_STRING_H
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+
+#define __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#define __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMZERO
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, __kernel_size_t);
+
+extern void __memzero(void *ptr, __kernel_size_t n);
+
+#define memset(p,v,n)							\
+	({								\
+	 	void *__p = (p); size_t __n = n;			\
+		if ((__n) != 0) {					\
+			if (__builtin_constant_p((v)) && (v) == 0)	\
+				__memzero((__p),(__n));			\
+			else						\
+				memset((__p),(v),(__n));		\
+		}							\
+		(__p);							\
+	})
+
+#define memzero(p,n) 							\
+	({ 								\
+	 	void *__p = (p); size_t __n = n;			\
+	 	if ((__n) != 0) 					\
+	 		__memzero((__p),(__n)); 			\
+	 	(__p); 							\
+	 })
+
+#endif
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
new file mode 100644
index 00000000000..cf0d0bdee74
--- /dev/null
+++ b/arch/arm/include/asm/suspend.h
@@ -0,0 +1,4 @@
+#ifndef _ASMARM_SUSPEND_H
+#define _ASMARM_SUSPEND_H
+
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
new file mode 100644
index 00000000000..514af792a59
--- /dev/null
+++ b/arch/arm/include/asm/system.h
@@ -0,0 +1,388 @@
+#ifndef __ASM_ARM_SYSTEM_H
+#define __ASM_ARM_SYSTEM_H
+
+#ifdef __KERNEL__
+
+#include <asm/memory.h>
+
+#define CPU_ARCH_UNKNOWN	0
+#define CPU_ARCH_ARMv3		1
+#define CPU_ARCH_ARMv4		2
+#define CPU_ARCH_ARMv4T		3
+#define CPU_ARCH_ARMv5		4
+#define CPU_ARCH_ARMv5T		5
+#define CPU_ARCH_ARMv5TE	6
+#define CPU_ARCH_ARMv5TEJ	7
+#define CPU_ARCH_ARMv6		8
+#define CPU_ARCH_ARMv7		9
+
+/*
+ * CR1 bits (CP#15 CR1)
+ */
+#define CR_M	(1 << 0)	/* MMU enable				*/
+#define CR_A	(1 << 1)	/* Alignment abort enable		*/
+#define CR_C	(1 << 2)	/* Dcache enable			*/
+#define CR_W	(1 << 3)	/* Write buffer enable			*/
+#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
+#define CR_D	(1 << 5)	/* 32-bit data address range		*/
+#define CR_L	(1 << 6)	/* Implementation defined		*/
+#define CR_B	(1 << 7)	/* Big endian				*/
+#define CR_S	(1 << 8)	/* System MMU protection		*/
+#define CR_R	(1 << 9)	/* ROM MMU protection			*/
+#define CR_F	(1 << 10)	/* Implementation defined		*/
+#define CR_Z	(1 << 11)	/* Implementation defined		*/
+#define CR_I	(1 << 12)	/* Icache enable			*/
+#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
+#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
+#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
+#define CR_DT	(1 << 16)
+#define CR_IT	(1 << 18)
+#define CR_ST	(1 << 19)
+#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
+#define CR_U	(1 << 22)	/* Unaligned access operation		*/
+#define CR_XP	(1 << 23)	/* Extended page tables			*/
+#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
+
+#define CPUID_ID	0
+#define CPUID_CACHETYPE	1
+#define CPUID_TCM	2
+#define CPUID_TLBTYPE	3
+
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences.  Apparently we can't trust
+ * the compiler from one version to another so a bit of paranoia won't hurt.
+ * This string is meant to be concatenated with the inline asm string and
+ * will cause compilation to stop on mismatch.
+ * (for details, see gcc PR 15089)
+ */
+#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/stringify.h>
+#include <linux/irqflags.h>
+
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg)							\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
+/*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant.  Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline unsigned int read_cpuid_id(void) __attribute_const__;
+
+static inline unsigned int read_cpuid_id(void)
+{
+	return read_cpuid(CPUID_ID);
+}
+
+#define __exception	__attribute__((section(".exception.text")))
+
+struct thread_info;
+struct task_struct;
+
+/* information about the system we're running on */
+extern unsigned int system_rev;
+extern unsigned int system_serial_low;
+extern unsigned int system_serial_high;
+extern unsigned int mem_fclk_21285;
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, int err)
+		__attribute__((noreturn));
+
+struct siginfo;
+void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
+		unsigned long err, unsigned long trap);
+
+void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+				       struct pt_regs *),
+		     int sig, const char *name);
+
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern asmlinkage void __backtrace(void);
+extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+struct mm_struct;
+extern void show_pte(struct mm_struct *mm, unsigned long addr);
+extern void __show_regs(struct pt_regs *);
+
+extern int cpu_architecture(void);
+extern void cpu_init(void);
+
+void arm_machine_restart(char mode);
+extern void (*arm_pm_restart)(char str);
+
+/*
+ * Intel's XScale3 core supports some v6 features (supersections, L2)
+ * but advertises itself as v5 as it does not support the v6 ISA.  For
+ * this reason, we need a way to explicitly test for this type of CPU.
+ */
+#ifndef CONFIG_CPU_XSC3
+#define cpu_is_xsc3()	0
+#else
+static inline int cpu_is_xsc3(void)
+{
+	extern unsigned int processor_id;
+
+	if ((processor_id & 0xffffe000) == 0x69056000)
+		return 1;
+
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
+#define	cpu_is_xscale()	0
+#else
+#define	cpu_is_xscale()	1
+#endif
+
+#define UDBG_UNDEFINED	(1 << 0)
+#define UDBG_SYSCALL	(1 << 1)
+#define UDBG_BADABORT	(1 << 2)
+#define UDBG_SEGV	(1 << 3)
+#define UDBG_BUS	(1 << 4)
+
+extern unsigned int user_debug;
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high()	(cr_alignment & CR_V)
+#else
+#define vectors_high()	(0)
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+#define isb() __asm__ __volatile__ ("isb" : : : "memory")
+#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
+#define dmb() __asm__ __volatile__ ("dmb" : : : "memory")
+#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+				    : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory")
+#else
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#endif
+
+#ifndef CONFIG_SMP
+#define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#else
+#define mb()		dmb()
+#define rmb()		dmb()
+#define wmb()		dmb()
+#define smp_mb()	dmb()
+#define smp_rmb()	dmb()
+#define smp_wmb()	dmb()
+#endif
+#define read_barrier_depends()		do { } while(0)
+#define smp_read_barrier_depends()	do { } while(0)
+
+#define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
+extern unsigned long cr_alignment;	/* defined in entry-armv.S */
+
+static inline unsigned int get_cr(void)
+{
+	unsigned int val;
+	asm("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val) : : "cc");
+	return val;
+}
+
+static inline void set_cr(unsigned int val)
+{
+	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
+	  : : "r" (val) : "cc");
+	isb();
+}
+
+#ifndef CONFIG_SMP
+extern void adjust_cr(unsigned long mask, unsigned long set);
+#endif
+
+#define CPACC_FULL(n)		(3 << (n * 2))
+#define CPACC_SVC(n)		(1 << (n * 2))
+#define CPACC_DISABLE(n)	(0 << (n * 2))
+
+static inline unsigned int get_copro_access(void)
+{
+	unsigned int val;
+	asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access"
+	  : "=r" (val) : : "cc");
+	return val;
+}
+
+static inline void set_copro_access(unsigned int val)
+{
+	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
+	  : : "r" (val) : "cc");
+	isb();
+}
+
+/*
+ * switch_mm() may do a full cache flush over the context switch,
+ * so enable interrupts over the context switch to avoid high
+ * latency.
+ */
+#define __ARCH_WANT_INTERRUPTS_ON_CTXSW
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.  schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
+ */
+extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
+
+#define switch_to(prev,next,last)					\
+do {									\
+	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\
+} while (0)
+
+#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
+/*
+ * On the StrongARM, "swp" is terminally broken since it bypasses the
+ * cache totally.  This means that the cache becomes inconsistent, and,
+ * since we use normal loads/stores as well, this is really bad.
+ * Typically, this causes oopsen in filp_close, but could have other,
+ * more disasterous effects.  There are two work-arounds:
+ *  1. Disable interrupts and emulate the atomic swap
+ *  2. Clean the cache, perform atomic swap, flush the cache
+ *
+ * We choose (1) since its the "easiest" to achieve here and is not
+ * dependent on the processor type.
+ *
+ * NOTE that this solution won't work on an SMP system, so explcitly
+ * forbid it here.
+ */
+#define swp_is_buggy
+#endif
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	extern void __bad_xchg(volatile void *, int);
+	unsigned long ret;
+#ifdef swp_is_buggy
+	unsigned long flags;
+#endif
+#if __LINUX_ARM_ARCH__ >= 6
+	unsigned int tmp;
+#endif
+
+	switch (size) {
+#if __LINUX_ARM_ARCH__ >= 6
+	case 1:
+		asm volatile("@	__xchg1\n"
+		"1:	ldrexb	%0, [%3]\n"
+		"	strexb	%1, %2, [%3]\n"
+		"	teq	%1, #0\n"
+		"	bne	1b"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	case 4:
+		asm volatile("@	__xchg4\n"
+		"1:	ldrex	%0, [%3]\n"
+		"	strex	%1, %2, [%3]\n"
+		"	teq	%1, #0\n"
+		"	bne	1b"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+#elif defined(swp_is_buggy)
+#ifdef CONFIG_SMP
+#error SMP is not supported on this platform
+#endif
+	case 1:
+		raw_local_irq_save(flags);
+		ret = *(volatile unsigned char *)ptr;
+		*(volatile unsigned char *)ptr = x;
+		raw_local_irq_restore(flags);
+		break;
+
+	case 4:
+		raw_local_irq_save(flags);
+		ret = *(volatile unsigned long *)ptr;
+		*(volatile unsigned long *)ptr = x;
+		raw_local_irq_restore(flags);
+		break;
+#else
+	case 1:
+		asm volatile("@	__xchg1\n"
+		"	swpb	%0, %1, [%2]"
+			: "=&r" (ret)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	case 4:
+		asm volatile("@	__xchg4\n"
+		"	swp	%0, %1, [%2]"
+			: "=&r" (ret)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+#endif
+	default:
+		__bad_xchg(ptr, size), ret = 0;
+		break;
+	}
+
+	return ret;
+}
+
+extern void disable_hlt(void);
+extern void enable_hlt(void);
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h
new file mode 100644
index 00000000000..f784d11f40b
--- /dev/null
+++ b/arch/arm/include/asm/termbits.h
@@ -0,0 +1,197 @@
+#ifndef __ASM_ARM_TERMBITS_H
+#define __ASM_ARM_TERMBITS_H
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* input baud rate */
+#define CMSPAR    010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	   16
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif	/* __ASM_ARM_TERMBITS_H */
diff --git a/arch/arm/include/asm/termios.h b/arch/arm/include/asm/termios.h
new file mode 100644
index 00000000000..293e3f1bc3f
--- /dev/null
+++ b/arch/arm/include/asm/termios.h
@@ -0,0 +1,92 @@
+#ifndef __ASM_ARM_TERMIOS_H
+#define __ASM_ARM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) {		\
+	unsigned short __tmp;					\
+	get_user(__tmp,&(termio)->x);				\
+	*(unsigned short *) &(termios)->x = __tmp;		\
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_ARM_TERMIOS_H */
diff --git a/arch/arm/include/asm/therm.h b/arch/arm/include/asm/therm.h
new file mode 100644
index 00000000000..f002f0197d7
--- /dev/null
+++ b/arch/arm/include/asm/therm.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor
+ *  DS1620 thermometer driver (as used in the Rebel.com NetWinder)
+ */
+#ifndef __ASM_THERM_H
+#define __ASM_THERM_H
+
+/* ioctl numbers for /dev/therm */
+#define CMD_SET_THERMOSTATE	0x53
+#define CMD_GET_THERMOSTATE	0x54
+#define CMD_GET_STATUS		0x56
+#define CMD_GET_TEMPERATURE	0x57
+#define CMD_SET_THERMOSTATE2	0x58
+#define CMD_GET_THERMOSTATE2	0x59
+#define CMD_GET_TEMPERATURE2	0x5a
+#define CMD_GET_FAN		0x5b
+#define CMD_SET_FAN		0x5c
+
+#define FAN_OFF			0
+#define FAN_ON			1
+#define FAN_ALWAYS_ON		2
+
+struct therm {
+	int hi;
+	int lo;
+};
+
+#endif
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
new file mode 100644
index 00000000000..e56fa48e4ae
--- /dev/null
+++ b/arch/arm/include/asm/thread_info.h
@@ -0,0 +1,153 @@
+/*
+ *  arch/arm/include/asm/thread_info.h
+ *
+ *  Copyright (C) 2002 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_THREAD_INFO_H
+#define __ASM_ARM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/fpstate.h>
+
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192
+#define THREAD_START_SP		(THREAD_SIZE - 8)
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <asm/types.h>
+#include <asm/domain.h>
+
+typedef unsigned long mm_segment_t;
+
+struct cpu_context_save {
+	__u32	r4;
+	__u32	r5;
+	__u32	r6;
+	__u32	r7;
+	__u32	r8;
+	__u32	r9;
+	__u32	sl;
+	__u32	fp;
+	__u32	sp;
+	__u32	pc;
+	__u32	extra[2];		/* Xscale 'acc' register, etc */
+};
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * __switch_to() assumes cpu_context follows immediately after cpu_domain.
+ */
+struct thread_info {
+	unsigned long		flags;		/* low level flags */
+	int			preempt_count;	/* 0 => preemptable, <0 => bug */
+	mm_segment_t		addr_limit;	/* address limit */
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	__u32			cpu;		/* cpu */
+	__u32			cpu_domain;	/* cpu domain */
+	struct cpu_context_save	cpu_context;	/* cpu context */
+	__u32			syscall;	/* syscall number */
+	__u8			used_cp[16];	/* thread used copro */
+	unsigned long		tp_value;
+	struct crunch_state	crunchstate;
+	union fp_state		fpstate __attribute__((aligned(8)));
+	union vfp_state		vfpstate;
+#ifdef CONFIG_ARM_THUMBEE
+	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
+#endif
+	struct restart_block	restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.preempt_count	= 1,						\
+	.addr_limit	= KERNEL_DS,					\
+	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
+			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
+			  domain_val(DOMAIN_IO, DOMAIN_CLIENT),		\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall,			\
+	},								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm ("sp");
+	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+#define thread_saved_pc(tsk)	\
+	((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
+#define thread_saved_fp(tsk)	\
+	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
+
+extern void crunch_task_disable(struct thread_info *);
+extern void crunch_task_copy(struct thread_info *, void *);
+extern void crunch_task_restore(struct thread_info *, void *);
+extern void crunch_task_release(struct thread_info *);
+
+extern void iwmmxt_task_disable(struct thread_info *);
+extern void iwmmxt_task_copy(struct thread_info *, void *);
+extern void iwmmxt_task_restore(struct thread_info *, void *);
+extern void iwmmxt_task_release(struct thread_info *);
+extern void iwmmxt_task_switch(struct thread_info *);
+
+#endif
+
+/*
+ * We use bit 30 of the preempt_count to indicate that kernel
+ * preemption is occurring.  See <asm/hardirq.h>.
+ */
+#define PREEMPT_ACTIVE	0x40000000
+
+/*
+ * thread information flags:
+ *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SIGPENDING	- signal pending
+ *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
+ *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
+ */
+#define TIF_SIGPENDING		0
+#define TIF_NEED_RESCHED	1
+#define TIF_SYSCALL_TRACE	8
+#define TIF_POLLING_NRFLAG	16
+#define TIF_USING_IWMMXT	17
+#define TIF_MEMDIE		18
+#define TIF_FREEZE		19
+
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+/*
+ * Change these and you break ASM code in entry-common.S
+ */
+#define _TIF_WORK_MASK		0x000000ff
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h
new file mode 100644
index 00000000000..f27379d7f72
--- /dev/null
+++ b/arch/arm/include/asm/thread_notify.h
@@ -0,0 +1,48 @@
+/*
+ *  arch/arm/include/asm/thread_notify.h
+ *
+ *  Copyright (C) 2006 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_THREAD_NOTIFY_H
+#define ASMARM_THREAD_NOTIFY_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <linux/notifier.h>
+#include <asm/thread_info.h>
+
+static inline int thread_register_notifier(struct notifier_block *n)
+{
+	extern struct atomic_notifier_head thread_notify_head;
+	return atomic_notifier_chain_register(&thread_notify_head, n);
+}
+
+static inline void thread_unregister_notifier(struct notifier_block *n)
+{
+	extern struct atomic_notifier_head thread_notify_head;
+	atomic_notifier_chain_unregister(&thread_notify_head, n);
+}
+
+static inline void thread_notify(unsigned long rc, struct thread_info *thread)
+{
+	extern struct atomic_notifier_head thread_notify_head;
+	atomic_notifier_call_chain(&thread_notify_head, rc, thread);
+}
+
+#endif
+
+/*
+ * These are the reason codes for the thread notifier.
+ */
+#define THREAD_NOTIFY_FLUSH	0
+#define THREAD_NOTIFY_RELEASE	1
+#define THREAD_NOTIFY_SWITCH	2
+
+#endif
+#endif
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
new file mode 100644
index 00000000000..3be8de3adab
--- /dev/null
+++ b/arch/arm/include/asm/timex.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/include/asm/timex.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Architecture Specific TIME specifications
+ */
+#ifndef _ASMARM_TIMEX_H
+#define _ASMARM_TIMEX_H
+
+#include <mach/timex.h>
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
new file mode 100644
index 00000000000..857f1dfac79
--- /dev/null
+++ b/arch/arm/include/asm/tlb.h
@@ -0,0 +1,94 @@
+/*
+ *  arch/arm/include/asm/tlb.h
+ *
+ *  Copyright (C) 2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Experimentation shows that on a StrongARM, it appears to be faster
+ *  to use the "invalidate whole tlb" rather than "invalidate single
+ *  tlb" for this.
+ *
+ *  This appears true for both the process fork+exit case, as well as
+ *  the munmap-large-area case.
+ */
+#ifndef __ASMARM_TLB_H
+#define __ASMARM_TLB_H
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#ifndef CONFIG_MMU
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#else /* !CONFIG_MMU */
+
+#include <asm/pgalloc.h>
+
+/*
+ * TLB handling.  This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		fullmm;
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	tlb->fullmm = full_mm_flush;
+
+	return tlb;
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	if (tlb->fullmm)
+		flush_tlb_mm(tlb->mm);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+
+/*
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush.  When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
+ */
+static inline void
+tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+}
+
+static inline void
+tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+}
+
+#define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
+#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+
+#define tlb_migrate_finish(mm)		do { } while (0)
+
+#endif /* CONFIG_MMU */
+#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
new file mode 100644
index 00000000000..b543a054a17
--- /dev/null
+++ b/arch/arm/include/asm/tlbflush.h
@@ -0,0 +1,503 @@
+/*
+ *  arch/arm/include/asm/tlbflush.h
+ *
+ *  Copyright (C) 1999-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_TLBFLUSH_H
+#define _ASMARM_TLBFLUSH_H
+
+
+#ifndef CONFIG_MMU
+
+#define tlb_flush(tlb)	((void) tlb)
+
+#else /* CONFIG_MMU */
+
+#include <asm/glue.h>
+
+#define TLB_V3_PAGE	(1 << 0)
+#define TLB_V4_U_PAGE	(1 << 1)
+#define TLB_V4_D_PAGE	(1 << 2)
+#define TLB_V4_I_PAGE	(1 << 3)
+#define TLB_V6_U_PAGE	(1 << 4)
+#define TLB_V6_D_PAGE	(1 << 5)
+#define TLB_V6_I_PAGE	(1 << 6)
+
+#define TLB_V3_FULL	(1 << 8)
+#define TLB_V4_U_FULL	(1 << 9)
+#define TLB_V4_D_FULL	(1 << 10)
+#define TLB_V4_I_FULL	(1 << 11)
+#define TLB_V6_U_FULL	(1 << 12)
+#define TLB_V6_D_FULL	(1 << 13)
+#define TLB_V6_I_FULL	(1 << 14)
+
+#define TLB_V6_U_ASID	(1 << 16)
+#define TLB_V6_D_ASID	(1 << 17)
+#define TLB_V6_I_ASID	(1 << 18)
+
+#define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
+#define TLB_DCLEAN	(1 << 30)
+#define TLB_WB		(1 << 31)
+
+/*
+ *	MMU TLB Model
+ *	=============
+ *
+ *	We have the following to choose from:
+ *	  v3    - ARMv3
+ *	  v4    - ARMv4 without write buffer
+ *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
+ *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
+ *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
+ *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
+ *	  v7wbi - identical to v6wbi
+ */
+#undef _TLB
+#undef MULTI_TLB
+
+#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V3
+# define v3_possible_flags	v3_tlb_flags
+# define v3_always_flags	v3_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v3
+# endif
+#else
+# define v3_possible_flags	0
+# define v3_always_flags	(-1UL)
+#endif
+
+#define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WT
+# define v4_possible_flags	v4_tlb_flags
+# define v4_always_flags	v4_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4
+# endif
+#else
+# define v4_possible_flags	0
+# define v4_always_flags	(-1UL)
+#endif
+
+#define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WBI
+# define v4wbi_possible_flags	v4wbi_tlb_flags
+# define v4wbi_always_flags	v4wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wbi
+# endif
+#else
+# define v4wbi_possible_flags	0
+# define v4wbi_always_flags	(-1UL)
+#endif
+
+#define fr_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FEROCEON
+# define fr_possible_flags	fr_tlb_flags
+# define fr_always_flags	fr_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wbi
+# endif
+#else
+# define fr_possible_flags	0
+# define fr_always_flags	(-1UL)
+#endif
+
+#define v4wb_tlb_flags	(TLB_WB | TLB_DCLEAN | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WB
+# define v4wb_possible_flags	v4wb_tlb_flags
+# define v4wb_always_flags	v4wb_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wb
+# endif
+#else
+# define v4wb_possible_flags	0
+# define v4wb_always_flags	(-1UL)
+#endif
+
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
+			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
+			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
+			 TLB_V6_I_ASID | TLB_V6_D_ASID)
+
+#ifdef CONFIG_CPU_TLB_V6
+# define v6wbi_possible_flags	v6wbi_tlb_flags
+# define v6wbi_always_flags	v6wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v6wbi
+# endif
+#else
+# define v6wbi_possible_flags	0
+# define v6wbi_always_flags	(-1UL)
+#endif
+
+#ifdef CONFIG_CPU_TLB_V7
+# define v7wbi_possible_flags	v6wbi_tlb_flags
+# define v7wbi_always_flags	v6wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v7wbi
+# endif
+#else
+# define v7wbi_possible_flags	0
+# define v7wbi_always_flags	(-1UL)
+#endif
+
+#ifndef _TLB
+#error Unknown TLB model
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+struct cpu_tlb_fns {
+	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
+	void (*flush_kern_range)(unsigned long, unsigned long);
+	unsigned long tlb_flags;
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_TLB
+
+#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
+#define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
+
+#else
+
+#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
+#define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
+
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+
+#endif
+
+extern struct cpu_tlb_fns cpu_tlb;
+
+#define __cpu_tlb_flags			cpu_tlb.tlb_flags
+
+/*
+ *	TLB Management
+ *	==============
+ *
+ *	The arch/arm/mm/tlb-*.S files implement these methods.
+ *
+ *	The TLB specific code is expected to perform whatever tests it
+ *	needs to determine if it should invalidate the TLB for each
+ *	call.  Start addresses are inclusive and end addresses are
+ *	exclusive; it is safe to round these addresses down.
+ *
+ *	flush_tlb_all()
+ *
+ *		Invalidate the entire TLB.
+ *
+ *	flush_tlb_mm(mm)
+ *
+ *		Invalidate all TLB entries in a particular address
+ *		space.
+ *		- mm	- mm_struct describing address space
+ *
+ *	flush_tlb_range(mm,start,end)
+ *
+ *		Invalidate a range of TLB entries in the specified
+ *		address space.
+ *		- mm	- mm_struct describing address space
+ *		- start - start address (may not be aligned)
+ *		- end	- end address (exclusive, may not be aligned)
+ *
+ *	flush_tlb_page(vaddr,vma)
+ *
+ *		Invalidate the specified page in the specified address range.
+ *		- vaddr - virtual address (may not be aligned)
+ *		- vma	- vma_struct describing address range
+ *
+ *	flush_kern_tlb_page(kaddr)
+ *
+ *		Invalidate the TLB entry for the specified page.  The address
+ *		will be in the kernels virtual memory space.  Current uses
+ *		only require the D-TLB to be invalidated.
+ *		- kaddr - Kernel virtual memory address
+ */
+
+/*
+ * We optimise the code below by:
+ *  - building a set of TLB flags that might be set in __cpu_tlb_flags
+ *  - building a set of TLB flags that will always be set in __cpu_tlb_flags
+ *  - if we're going to need __cpu_tlb_flags, access it once and only once
+ *
+ * This allows us to build optimal assembly for the single-CPU type case,
+ * and as close to optimal given the compiler constrants for multi-CPU
+ * case.  We could do better for the multi-CPU case if the compiler
+ * implemented the "%?" method, but this has been discontinued due to too
+ * many people getting it wrong.
+ */
+#define possible_tlb_flags	(v3_possible_flags | \
+				 v4_possible_flags | \
+				 v4wbi_possible_flags | \
+				 fr_possible_flags | \
+				 v4wb_possible_flags | \
+				 v6wbi_possible_flags | \
+				 v7wbi_possible_flags)
+
+#define always_tlb_flags	(v3_always_flags & \
+				 v4_always_flags & \
+				 v4wbi_always_flags & \
+				 fr_always_flags & \
+				 v4wb_always_flags & \
+				 v6wbi_always_flags & \
+				 v7wbi_always_flags)
+
+#define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
+
+static inline void local_flush_tlb_all(void)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (tlb_flag(TLB_V3_FULL))
+		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL))
+		asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL))
+		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
+		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
+}
+
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	const int zero = 0;
+	const int asid = ASID(mm);
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+		if (tlb_flag(TLB_V3_FULL))
+			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_U_FULL))
+			asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_D_FULL))
+			asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_I_FULL))
+			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	}
+
+	if (tlb_flag(TLB_V6_U_ASID))
+		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V6_D_ASID))
+		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V6_I_ASID))
+		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
+}
+
+static inline void
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		if (tlb_flag(TLB_V3_PAGE))
+			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_U_PAGE))
+			asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_D_PAGE))
+			asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_I_PAGE))
+			asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+		if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	}
+
+	if (tlb_flag(TLB_V6_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V6_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V6_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
+}
+
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	kaddr &= PAGE_MASK;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (tlb_flag(TLB_V3_PAGE))
+		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+	if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+	if (tlb_flag(TLB_V6_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V6_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V6_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
+}
+
+/*
+ *	flush_pmd_entry
+ *
+ *	Flush a PMD entry (word aligned, or double-word aligned) to
+ *	RAM if the TLB for the CPU we are running on requires this.
+ *	This is typically used when we are creating PMD entries.
+ *
+ *	clean_pmd_entry
+ *
+ *	Clean (but don't drain the write buffer) if the CPU requires
+ *	these operations.  This is typically used when we are removing
+ *	PMD entries.
+ */
+static inline void flush_pmd_entry(pmd_t *pmd)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_DCLEAN))
+		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_L2CLEAN_FR))
+		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+}
+
+static inline void clean_pmd_entry(pmd_t *pmd)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_DCLEAN))
+		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_L2CLEAN_FR))
+		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
+			: : "r" (pmd) : "cc");
+}
+
+#undef tlb_flag
+#undef always_tlb_flags
+#undef possible_tlb_flags
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define local_flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
+#define local_flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
+
+#ifndef CONFIG_SMP
+#define flush_tlb_all		local_flush_tlb_all
+#define flush_tlb_mm		local_flush_tlb_mm
+#define flush_tlb_page		local_flush_tlb_page
+#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
+#define flush_tlb_range		local_flush_tlb_range
+#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
+#else
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
+extern void flush_tlb_kernel_page(unsigned long kaddr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+#endif
+
+/*
+ * if PG_dcache_dirty is set for the page, we need to ensure that any
+ * cache entries for the kernels virtual memory range are written
+ * back to the page.
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+
+#endif
+
+#endif /* CONFIG_MMU */
+
+#endif
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
new file mode 100644
index 00000000000..accbd7cad9b
--- /dev/null
+++ b/arch/arm/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_ARM_TOPOLOGY_H
+#define _ASM_ARM_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
new file mode 100644
index 00000000000..aa399aec568
--- /dev/null
+++ b/arch/arm/include/asm/traps.h
@@ -0,0 +1,29 @@
+#ifndef _ASMARM_TRAP_H
+#define _ASMARM_TRAP_H
+
+#include <linux/list.h>
+
+struct undef_hook {
+	struct list_head node;
+	u32 instr_mask;
+	u32 instr_val;
+	u32 cpsr_mask;
+	u32 cpsr_val;
+	int (*fn)(struct pt_regs *regs, unsigned int instr);
+};
+
+void register_undef_hook(struct undef_hook *hook);
+void unregister_undef_hook(struct undef_hook *hook);
+
+static inline int in_exception_text(unsigned long ptr)
+{
+	extern char __exception_text_start[];
+	extern char __exception_text_end[];
+
+	return ptr >= (unsigned long)&__exception_text_start &&
+	       ptr < (unsigned long)&__exception_text_end;
+}
+
+extern void __init early_trap_init(void);
+
+#endif
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
new file mode 100644
index 00000000000..345df01534a
--- /dev/null
+++ b/arch/arm/include/asm/types.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_ARM_TYPES_H
+#define __ASM_ARM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
+
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
new file mode 100644
index 00000000000..d0f51ff900b
--- /dev/null
+++ b/arch/arm/include/asm/uaccess.h
@@ -0,0 +1,444 @@
+/*
+ *  arch/arm/include/asm/uaccess.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_UACCESS_H
+#define _ASMARM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/errno.h>
+#include <asm/memory.h>
+#include <asm/domain.h>
+#include <asm/system.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These two are intentionally not defined anywhere - if the kernel
+ * code generates any references to them, that's a bug.
+ */
+extern int __get_user_bad(void);
+extern int __put_user_bad(void);
+
+/*
+ * Note that this is actually 0x1,0000,0000
+ */
+#define KERNEL_DS	0x00000000
+#define get_ds()	(KERNEL_DS)
+
+#ifdef CONFIG_MMU
+
+#define USER_DS		TASK_SIZE
+#define get_fs()	(current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
+}
+
+#define segment_eq(a,b)	((a) == (b))
+
+#define __addr_ok(addr) ({ \
+	unsigned long flag; \
+	__asm__("cmp %2, %0; movlo %0, #0" \
+		: "=&r" (flag) \
+		: "0" (current_thread_info()->addr_limit), "r" (addr) \
+		: "cc"); \
+	(flag == 0); })
+
+/* We use 33-bit arithmetic here... */
+#define __range_ok(addr,size) ({ \
+	unsigned long flag, roksum; \
+	__chk_user_ptr(addr);	\
+	__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
+		: "=&r" (flag), "=&r" (roksum) \
+		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
+		: "cc"); \
+	flag; })
+
+/*
+ * Single-value transfer routines.  They automatically use the right
+ * size if we just have the right pointer type.  Note that the functions
+ * which read from user space (*get_*) need to take care not to leak
+ * kernel data even if the calling code is buggy and fails to check
+ * the return value.  This means zeroing out the destination variable
+ * or buffer on error.  Normally this is done out of line by the
+ * fixup code, but there are a few places where it intrudes on the
+ * main code path.  When we only write to user space, there is no
+ * problem.
+ */
+extern int __get_user_1(void *);
+extern int __get_user_2(void *);
+extern int __get_user_4(void *);
+
+#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		"bl	__get_user_" #__s				\
+		: "=&r" (__e), "=r" (__r2)				\
+		: "0" (__p)						\
+		: __i, "cc")
+
+#define get_user(x,p)							\
+	({								\
+		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __r2 asm("r2");			\
+		register int __e asm("r0");				\
+		switch (sizeof(*(__p))) {				\
+		case 1:							\
+			__get_user_x(__r2, __p, __e, 1, "lr");		\
+	       		break;						\
+		case 2:							\
+			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			break;						\
+		case 4:							\
+	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			break;						\
+		default: __e = __get_user_bad(); break;			\
+		}							\
+		x = (typeof(*(p))) __r2;				\
+		__e;							\
+	})
+
+extern int __put_user_1(void *, unsigned int);
+extern int __put_user_2(void *, unsigned int);
+extern int __put_user_4(void *, unsigned int);
+extern int __put_user_8(void *, unsigned long long);
+
+#define __put_user_x(__r2,__p,__e,__s)					\
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		"bl	__put_user_" #__s				\
+		: "=&r" (__e)						\
+		: "0" (__p), "r" (__r2)					\
+		: "ip", "lr", "cc")
+
+#define put_user(x,p)							\
+	({								\
+		register const typeof(*(p)) __r2 asm("r2") = (x);	\
+		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register int __e asm("r0");				\
+		switch (sizeof(*(__p))) {				\
+		case 1:							\
+			__put_user_x(__r2, __p, __e, 1);		\
+			break;						\
+		case 2:							\
+			__put_user_x(__r2, __p, __e, 2);		\
+			break;						\
+		case 4:							\
+			__put_user_x(__r2, __p, __e, 4);		\
+			break;						\
+		case 8:							\
+			__put_user_x(__r2, __p, __e, 8);		\
+			break;						\
+		default: __e = __put_user_bad(); break;			\
+		}							\
+		__e;							\
+	})
+
+#else /* CONFIG_MMU */
+
+/*
+ * uClinux has only one addr space, so has simplified address limits.
+ */
+#define USER_DS			KERNEL_DS
+
+#define segment_eq(a,b)		(1)
+#define __addr_ok(addr)		(1)
+#define __range_ok(addr,size)	(0)
+#define get_fs()		(KERNEL_DS)
+
+static inline void set_fs(mm_segment_t fs)
+{
+}
+
+#define get_user(x,p)	__get_user(x,p)
+#define put_user(x,p)	__put_user(x,p)
+
+#endif /* CONFIG_MMU */
+
+#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
+
+/*
+ * The "__xxx" versions of the user access functions do not verify the
+ * address space - it must have been done previously with a separate
+ * "access_ok()" call.
+ *
+ * The "xxx_error" versions set the third argument to EFAULT if an
+ * error occurs, and leave it unchanged on success.  Note that these
+ * versions are void (ie, don't return a value as such).
+ */
+#define __get_user(x,ptr)						\
+({									\
+	long __gu_err = 0;						\
+	__get_user_err((x),(ptr),__gu_err);				\
+	__gu_err;							\
+})
+
+#define __get_user_error(x,ptr,err)					\
+({									\
+	__get_user_err((x),(ptr),err);					\
+	(void) 0;							\
+})
+
+#define __get_user_err(x,ptr,err)					\
+do {									\
+	unsigned long __gu_addr = (unsigned long)(ptr);			\
+	unsigned long __gu_val;						\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
+	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
+	case 4:	__get_user_asm_word(__gu_val,__gu_addr,err);	break;	\
+	default: (__gu_val) = __get_user_bad();				\
+	}								\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+} while (0)
+
+#define __get_user_asm_byte(x,addr,err)				\
+	__asm__ __volatile__(					\
+	"1:	ldrbt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	mov	%1, #0\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err), "=&r" (x)					\
+	: "r" (addr), "i" (-EFAULT)				\
+	: "cc")
+
+#ifndef __ARMEB__
+#define __get_user_asm_half(x,__gu_addr,err)			\
+({								\
+	unsigned long __b1, __b2;				\
+	__get_user_asm_byte(__b1, __gu_addr, err);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	(x) = __b1 | (__b2 << 8);				\
+})
+#else
+#define __get_user_asm_half(x,__gu_addr,err)			\
+({								\
+	unsigned long __b1, __b2;				\
+	__get_user_asm_byte(__b1, __gu_addr, err);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	(x) = (__b1 << 8) | __b2;				\
+})
+#endif
+
+#define __get_user_asm_word(x,addr,err)				\
+	__asm__ __volatile__(					\
+	"1:	ldrt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	mov	%1, #0\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err), "=&r" (x)					\
+	: "r" (addr), "i" (-EFAULT)				\
+	: "cc")
+
+#define __put_user(x,ptr)						\
+({									\
+	long __pu_err = 0;						\
+	__put_user_err((x),(ptr),__pu_err);				\
+	__pu_err;							\
+})
+
+#define __put_user_error(x,ptr,err)					\
+({									\
+	__put_user_err((x),(ptr),err);					\
+	(void) 0;							\
+})
+
+#define __put_user_err(x,ptr,err)					\
+do {									\
+	unsigned long __pu_addr = (unsigned long)(ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
+	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
+	case 4: __put_user_asm_word(__pu_val,__pu_addr,err);	break;	\
+	case 8:	__put_user_asm_dword(__pu_val,__pu_addr,err);	break;	\
+	default: __put_user_bad();					\
+	}								\
+} while (0)
+
+#define __put_user_asm_byte(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strbt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err)						\
+	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
+	: "cc")
+
+#ifndef __ARMEB__
+#define __put_user_asm_half(x,__pu_addr,err)			\
+({								\
+	unsigned long __temp = (unsigned long)(x);		\
+	__put_user_asm_byte(__temp, __pu_addr, err);		\
+	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
+})
+#else
+#define __put_user_asm_half(x,__pu_addr,err)			\
+({								\
+	unsigned long __temp = (unsigned long)(x);		\
+	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
+	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
+})
+#endif
+
+#define __put_user_asm_word(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err)						\
+	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
+	: "cc")
+
+#ifndef __ARMEB__
+#define	__reg_oper0	"%R2"
+#define	__reg_oper1	"%Q2"
+#else
+#define	__reg_oper0	"%Q2"
+#define	__reg_oper1	"%R2"
+#endif
+
+#define __put_user_asm_dword(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
+	"2:	strt	" __reg_oper0 ", [%1], #0\n"		\
+	"3:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"4:	mov	%0, %3\n"				\
+	"	b	3b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 4b\n"				\
+	"	.long	2b, 4b\n"				\
+	"	.previous"					\
+	: "+r" (err), "+r" (__pu_addr)				\
+	: "r" (x), "i" (-EFAULT)				\
+	: "cc")
+
+
+#ifdef CONFIG_MMU
+extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+#else
+#define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
+#define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
+#define __clear_user(addr,n)		(memset((void __force *)addr, 0, n), 0)
+#endif
+
+extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
+extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
+
+static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else /* security hole - plug it */
+		memzero(to, n);
+	return n;
+}
+
+static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __clear_user(to, n);
+	return n;
+}
+
+static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	long res = -EFAULT;
+	if (access_ok(VERIFY_READ, src, 1))
+		res = __strncpy_from_user(dst, src, count);
+	return res;
+}
+
+#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
+
+static inline long __must_check strnlen_user(const char __user *s, long n)
+{
+	unsigned long res = 0;
+
+	if (__addr_ok(s))
+		res = __strnlen_user(s, n);
+
+	return res;
+}
+
+#endif /* _ASMARM_UACCESS_H */
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
new file mode 100644
index 00000000000..bf65e9f4525
--- /dev/null
+++ b/arch/arm/include/asm/ucontext.h
@@ -0,0 +1,103 @@
+#ifndef _ASMARM_UCONTEXT_H
+#define _ASMARM_UCONTEXT_H
+
+#include <asm/fpstate.h>
+
+/*
+ * struct sigcontext only has room for the basic registers, but struct
+ * ucontext now has room for all registers which need to be saved and
+ * restored.  Coprocessor registers are stored in uc_regspace.  Each
+ * coprocessor's saved state should start with a documented 32-bit magic
+ * number, followed by a 32-bit word giving the coproccesor's saved size.
+ * uc_regspace may be expanded if necessary, although this takes some
+ * coordination with glibc.
+ */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;
+	/* Allow for uc_sigmask growth.  Glibc uses a 1024-bit sigset_t.  */
+	int		  __unused[32 - (sizeof (sigset_t) / sizeof (int))];
+	/* Last for extensibility.  Eight byte aligned because some
+	   coprocessors require eight byte alignment.  */
+ 	unsigned long	  uc_regspace[128] __attribute__((__aligned__(8)));
+};
+
+#ifdef __KERNEL__
+
+/*
+ * Coprocessor save state.  The magic values and specific
+ * coprocessor's layouts are part of the userspace ABI.  Each one of
+ * these should be a multiple of eight bytes and aligned to eight
+ * bytes, to prevent unpredictable padding in the signal frame.
+ */
+
+#ifdef CONFIG_CRUNCH
+#define CRUNCH_MAGIC		0x5065cf03
+#define CRUNCH_STORAGE_SIZE	(CRUNCH_SIZE + 8)
+
+struct crunch_sigframe {
+	unsigned long	magic;
+	unsigned long	size;
+	struct crunch_state	storage;
+} __attribute__((__aligned__(8)));
+#endif
+
+#ifdef CONFIG_IWMMXT
+/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */
+#define IWMMXT_MAGIC		0x12ef842a
+#define IWMMXT_STORAGE_SIZE	(IWMMXT_SIZE + 8)
+
+struct iwmmxt_sigframe {
+	unsigned long	magic;
+	unsigned long	size;
+	struct iwmmxt_struct storage;
+} __attribute__((__aligned__(8)));
+#endif /* CONFIG_IWMMXT */
+
+#ifdef CONFIG_VFP
+#if __LINUX_ARM_ARCH__ < 6
+/* For ARM pre-v6, we use fstmiax and fldmiax.  This adds one extra
+ * word after the registers, and a word of padding at the end for
+ * alignment.  */
+#define VFP_MAGIC		0x56465001
+#define VFP_STORAGE_SIZE	152
+#else
+#define VFP_MAGIC		0x56465002
+#define VFP_STORAGE_SIZE	144
+#endif
+
+struct vfp_sigframe
+{
+	unsigned long		magic;
+	unsigned long		size;
+	union vfp_state		storage;
+};
+#endif /* CONFIG_VFP */
+
+/*
+ * Auxiliary signal frame.  This saves stuff like FP state.
+ * The layout of this structure is not part of the user ABI,
+ * because the config options aren't.  uc_regspace is really
+ * one of these.
+ */
+struct aux_sigframe {
+#ifdef CONFIG_CRUNCH
+	struct crunch_sigframe	crunch;
+#endif
+#ifdef CONFIG_IWMMXT
+	struct iwmmxt_sigframe	iwmmxt;
+#endif
+#if 0 && defined CONFIG_VFP /* Not yet saved.  */
+	struct vfp_sigframe	vfp;
+#endif
+	/* Something that isn't a valid magic number for any coprocessor.  */
+	unsigned long		end_magic;
+} __attribute__((__aligned__(8)));
+
+#endif
+
+#endif /* !_ASMARM_UCONTEXT_H */
diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
new file mode 100644
index 00000000000..44593a89490
--- /dev/null
+++ b/arch/arm/include/asm/unaligned.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_ARM_UNALIGNED_H
+#define _ASM_ARM_UNALIGNED_H
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+/*
+ * Select endianness
+ */
+#ifndef __ARMEB__
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+#else
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+#endif
+
+#endif /* _ASM_ARM_UNALIGNED_H */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
new file mode 100644
index 00000000000..010618487cf
--- /dev/null
+++ b/arch/arm/include/asm/unistd.h
@@ -0,0 +1,456 @@
+/*
+ *  arch/arm/include/asm/unistd.h
+ *
+ *  Copyright (C) 2001-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
+ * no matter what the change is.  Thanks!
+ */
+#ifndef __ASM_ARM_UNISTD_H
+#define __ASM_ARM_UNISTD_H
+
+#define __NR_OABI_SYSCALL_BASE	0x900000
+
+#if defined(__thumb__) || defined(__ARM_EABI__)
+#define __NR_SYSCALL_BASE	0
+#else
+#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
+#endif
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
+#define __NR_exit			(__NR_SYSCALL_BASE+  1)
+#define __NR_fork			(__NR_SYSCALL_BASE+  2)
+#define __NR_read			(__NR_SYSCALL_BASE+  3)
+#define __NR_write			(__NR_SYSCALL_BASE+  4)
+#define __NR_open			(__NR_SYSCALL_BASE+  5)
+#define __NR_close			(__NR_SYSCALL_BASE+  6)
+					/* 7 was sys_waitpid */
+#define __NR_creat			(__NR_SYSCALL_BASE+  8)
+#define __NR_link			(__NR_SYSCALL_BASE+  9)
+#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
+#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
+#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
+#define __NR_time			(__NR_SYSCALL_BASE+ 13)
+#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
+#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
+#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
+					/* 17 was sys_break */
+					/* 18 was sys_stat */
+#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
+#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
+#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
+#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
+#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
+#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
+#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
+#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
+#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
+					/* 28 was sys_fstat */
+#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
+#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
+					/* 31 was sys_stty */
+					/* 32 was sys_gtty */
+#define __NR_access			(__NR_SYSCALL_BASE+ 33)
+#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
+					/* 35 was sys_ftime */
+#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
+#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
+#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
+#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
+#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
+#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
+#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
+#define __NR_times			(__NR_SYSCALL_BASE+ 43)
+					/* 44 was sys_prof */
+#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
+#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
+#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
+					/* 48 was sys_signal */
+#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
+#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
+#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
+#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
+					/* 53 was sys_lock */
+#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
+#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
+					/* 56 was sys_mpx */
+#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
+					/* 58 was sys_ulimit */
+					/* 59 was sys_olduname */
+#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
+#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
+#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
+#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
+#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
+#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
+#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
+#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
+					/* 68 was sys_sgetmask */
+					/* 69 was sys_ssetmask */
+#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
+#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
+#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
+#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
+#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
+#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
+#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
+#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
+#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
+#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
+#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
+#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
+#define __NR_select			(__NR_SYSCALL_BASE+ 82)
+#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
+					/* 84 was sys_lstat */
+#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
+#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
+#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
+#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
+#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
+#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
+#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
+#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
+#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
+#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
+#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
+#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
+#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
+					/* 98 was sys_profil */
+#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
+#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
+					/* 101 was sys_ioperm */
+#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
+#define __NR_syslog			(__NR_SYSCALL_BASE+103)
+#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
+#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
+#define __NR_stat			(__NR_SYSCALL_BASE+106)
+#define __NR_lstat			(__NR_SYSCALL_BASE+107)
+#define __NR_fstat			(__NR_SYSCALL_BASE+108)
+					/* 109 was sys_uname */
+					/* 110 was sys_iopl */
+#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
+					/* 112 was sys_idle */
+#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
+#define __NR_wait4			(__NR_SYSCALL_BASE+114)
+#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
+#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
+#define __NR_ipc			(__NR_SYSCALL_BASE+117)
+#define __NR_fsync			(__NR_SYSCALL_BASE+118)
+#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
+#define __NR_clone			(__NR_SYSCALL_BASE+120)
+#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
+#define __NR_uname			(__NR_SYSCALL_BASE+122)
+					/* 123 was sys_modify_ldt */
+#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
+#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
+#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
+					/* 127 was sys_create_module */
+#define __NR_init_module		(__NR_SYSCALL_BASE+128)
+#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
+					/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
+#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
+#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
+#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
+#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
+#define __NR_personality		(__NR_SYSCALL_BASE+136)
+					/* 137 was sys_afs_syscall */
+#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
+#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
+#define __NR__llseek			(__NR_SYSCALL_BASE+140)
+#define __NR_getdents			(__NR_SYSCALL_BASE+141)
+#define __NR__newselect			(__NR_SYSCALL_BASE+142)
+#define __NR_flock			(__NR_SYSCALL_BASE+143)
+#define __NR_msync			(__NR_SYSCALL_BASE+144)
+#define __NR_readv			(__NR_SYSCALL_BASE+145)
+#define __NR_writev			(__NR_SYSCALL_BASE+146)
+#define __NR_getsid			(__NR_SYSCALL_BASE+147)
+#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
+#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
+#define __NR_mlock			(__NR_SYSCALL_BASE+150)
+#define __NR_munlock			(__NR_SYSCALL_BASE+151)
+#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
+#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
+#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
+#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
+#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
+#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
+#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
+#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
+#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
+#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
+#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
+#define __NR_mremap			(__NR_SYSCALL_BASE+163)
+#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
+#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
+					/* 166 was sys_vm86 */
+					/* 167 was sys_query_module */
+#define __NR_poll			(__NR_SYSCALL_BASE+168)
+#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
+#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
+#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
+#define __NR_prctl			(__NR_SYSCALL_BASE+172)
+#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
+#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
+#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
+#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
+#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
+#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
+#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
+#define __NR_pread64			(__NR_SYSCALL_BASE+180)
+#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
+#define __NR_chown			(__NR_SYSCALL_BASE+182)
+#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
+#define __NR_capget			(__NR_SYSCALL_BASE+184)
+#define __NR_capset			(__NR_SYSCALL_BASE+185)
+#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
+#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
+					/* 188 reserved */
+					/* 189 reserved */
+#define __NR_vfork			(__NR_SYSCALL_BASE+190)
+#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
+#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
+#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
+#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
+#define __NR_stat64			(__NR_SYSCALL_BASE+195)
+#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
+#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
+#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
+#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
+#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
+#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
+#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
+#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
+#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
+#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
+#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
+#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
+#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
+#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
+#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
+#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
+#define __NR_chown32			(__NR_SYSCALL_BASE+212)
+#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
+#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
+#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
+#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
+#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
+#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
+#define __NR_mincore			(__NR_SYSCALL_BASE+219)
+#define __NR_madvise			(__NR_SYSCALL_BASE+220)
+#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
+					/* 222 for tux */
+					/* 223 is unused */
+#define __NR_gettid			(__NR_SYSCALL_BASE+224)
+#define __NR_readahead			(__NR_SYSCALL_BASE+225)
+#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
+#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
+#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
+#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
+#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
+#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
+#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
+#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
+#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
+#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
+#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
+#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
+#define __NR_tkill			(__NR_SYSCALL_BASE+238)
+#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
+#define __NR_futex			(__NR_SYSCALL_BASE+240)
+#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
+#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
+#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
+#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
+#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
+#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
+#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
+#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
+#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
+#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
+#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
+#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
+#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
+					/* 254 for set_thread_area */
+					/* 255 for get_thread_area */
+#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
+#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
+#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
+#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
+#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
+#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
+#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
+#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
+#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
+#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
+#define __NR_waitid			(__NR_SYSCALL_BASE+280)
+#define __NR_socket			(__NR_SYSCALL_BASE+281)
+#define __NR_bind			(__NR_SYSCALL_BASE+282)
+#define __NR_connect			(__NR_SYSCALL_BASE+283)
+#define __NR_listen			(__NR_SYSCALL_BASE+284)
+#define __NR_accept			(__NR_SYSCALL_BASE+285)
+#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
+#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
+#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
+#define __NR_send			(__NR_SYSCALL_BASE+289)
+#define __NR_sendto			(__NR_SYSCALL_BASE+290)
+#define __NR_recv			(__NR_SYSCALL_BASE+291)
+#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
+#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
+#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
+#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
+#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
+#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
+#define __NR_semop			(__NR_SYSCALL_BASE+298)
+#define __NR_semget			(__NR_SYSCALL_BASE+299)
+#define __NR_semctl			(__NR_SYSCALL_BASE+300)
+#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
+#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
+#define __NR_msgget			(__NR_SYSCALL_BASE+303)
+#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
+#define __NR_shmat			(__NR_SYSCALL_BASE+305)
+#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
+#define __NR_shmget			(__NR_SYSCALL_BASE+307)
+#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
+#define __NR_add_key			(__NR_SYSCALL_BASE+309)
+#define __NR_request_key		(__NR_SYSCALL_BASE+310)
+#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
+#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
+#define __NR_vserver			(__NR_SYSCALL_BASE+313)
+#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
+#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
+#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
+#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
+#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
+#define __NR_mbind			(__NR_SYSCALL_BASE+319)
+#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
+#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
+#define __NR_openat			(__NR_SYSCALL_BASE+322)
+#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
+#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
+#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
+#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
+#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
+#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
+#define __NR_renameat			(__NR_SYSCALL_BASE+329)
+#define __NR_linkat			(__NR_SYSCALL_BASE+330)
+#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
+#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
+#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
+#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
+					/* 335 for pselect6 */
+					/* 336 for ppoll */
+#define __NR_unshare			(__NR_SYSCALL_BASE+337)
+#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
+#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
+#define __NR_splice			(__NR_SYSCALL_BASE+340)
+#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
+#define __NR_sync_file_range2		__NR_arm_sync_file_range
+#define __NR_tee			(__NR_SYSCALL_BASE+342)
+#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
+#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
+#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
+					/* 346 for epoll_pwait */
+#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
+#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
+#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
+#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
+#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
+#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
+#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
+#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
+#define __NR_signalfd4			(__NR_SYSCALL_BASE+355)
+#define __NR_eventfd2			(__NR_SYSCALL_BASE+356)
+#define __NR_epoll_create1		(__NR_SYSCALL_BASE+357)
+#define __NR_dup3			(__NR_SYSCALL_BASE+358)
+#define __NR_pipe2			(__NR_SYSCALL_BASE+359)
+#define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
+
+/*
+ * The following SWIs are ARM private.
+ */
+#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
+#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
+#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
+#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
+#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
+#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
+
+/*
+ * The following syscalls are obsolete and no longer available for EABI.
+ */
+#if defined(__ARM_EABI__) && !defined(__KERNEL__)
+#undef __NR_time
+#undef __NR_umount
+#undef __NR_stime
+#undef __NR_alarm
+#undef __NR_utime
+#undef __NR_getrlimit
+#undef __NR_select
+#undef __NR_readdir
+#undef __NR_mmap
+#undef __NR_socketcall
+#undef __NR_syscall
+#undef __NR_ipc
+#endif
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_SOCKETCALL
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+/*
+ * Unimplemented (or alternatively implemented) syscalls
+ */
+#define __IGNORE_fadvise64_64		1
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
new file mode 100644
index 00000000000..825c1e7c582
--- /dev/null
+++ b/arch/arm/include/asm/user.h
@@ -0,0 +1,84 @@
+#ifndef _ARM_USER_H
+#define _ARM_USER_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+struct user_fp {
+	struct fp_reg {
+		unsigned int sign1:1;
+		unsigned int unused:15;
+		unsigned int sign2:1;
+		unsigned int exponent:14;
+		unsigned int j:1;
+		unsigned int mantissa1:31;
+		unsigned int mantissa0:32;
+	} fpregs[8];
+	unsigned int fpsr:32;
+	unsigned int fpcr:32;
+	unsigned char ftype[8];
+	unsigned int init_flag;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct pt_regs regs;		/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+  struct user_fp u_fp;		/* FP state */
+  struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
+  				/* the FP registers. */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ARM_USER_H */
diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h
new file mode 100644
index 00000000000..f4ab34fd4f7
--- /dev/null
+++ b/arch/arm/include/asm/vfp.h
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/include/asm/vfp.h
+ *
+ * VFP register definitions.
+ * First, the standard VFP set.
+ */
+
+#define FPSID			cr0
+#define FPSCR			cr1
+#define MVFR1			cr6
+#define MVFR0			cr7
+#define FPEXC			cr8
+#define FPINST			cr9
+#define FPINST2			cr10
+
+/* FPSID bits */
+#define FPSID_IMPLEMENTER_BIT	(24)
+#define FPSID_IMPLEMENTER_MASK	(0xff << FPSID_IMPLEMENTER_BIT)
+#define FPSID_SOFTWARE		(1<<23)
+#define FPSID_FORMAT_BIT	(21)
+#define FPSID_FORMAT_MASK	(0x3  << FPSID_FORMAT_BIT)
+#define FPSID_NODOUBLE		(1<<20)
+#define FPSID_ARCH_BIT		(16)
+#define FPSID_ARCH_MASK		(0xF  << FPSID_ARCH_BIT)
+#define FPSID_PART_BIT		(8)
+#define FPSID_PART_MASK		(0xFF << FPSID_PART_BIT)
+#define FPSID_VARIANT_BIT	(4)
+#define FPSID_VARIANT_MASK	(0xF  << FPSID_VARIANT_BIT)
+#define FPSID_REV_BIT		(0)
+#define FPSID_REV_MASK		(0xF  << FPSID_REV_BIT)
+
+/* FPEXC bits */
+#define FPEXC_EX		(1 << 31)
+#define FPEXC_EN		(1 << 30)
+#define FPEXC_DEX		(1 << 29)
+#define FPEXC_FP2V		(1 << 28)
+#define FPEXC_VV		(1 << 27)
+#define FPEXC_TFV		(1 << 26)
+#define FPEXC_LENGTH_BIT	(8)
+#define FPEXC_LENGTH_MASK	(7 << FPEXC_LENGTH_BIT)
+#define FPEXC_IDF		(1 << 7)
+#define FPEXC_IXF		(1 << 4)
+#define FPEXC_UFF		(1 << 3)
+#define FPEXC_OFF		(1 << 2)
+#define FPEXC_DZF		(1 << 1)
+#define FPEXC_IOF		(1 << 0)
+#define FPEXC_TRAP_MASK		(FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF)
+
+/* FPSCR bits */
+#define FPSCR_DEFAULT_NAN	(1<<25)
+#define FPSCR_FLUSHTOZERO	(1<<24)
+#define FPSCR_ROUND_NEAREST	(0<<22)
+#define FPSCR_ROUND_PLUSINF	(1<<22)
+#define FPSCR_ROUND_MINUSINF	(2<<22)
+#define FPSCR_ROUND_TOZERO	(3<<22)
+#define FPSCR_RMODE_BIT		(22)
+#define FPSCR_RMODE_MASK	(3 << FPSCR_RMODE_BIT)
+#define FPSCR_STRIDE_BIT	(20)
+#define FPSCR_STRIDE_MASK	(3 << FPSCR_STRIDE_BIT)
+#define FPSCR_LENGTH_BIT	(16)
+#define FPSCR_LENGTH_MASK	(7 << FPSCR_LENGTH_BIT)
+#define FPSCR_IOE		(1<<8)
+#define FPSCR_DZE		(1<<9)
+#define FPSCR_OFE		(1<<10)
+#define FPSCR_UFE		(1<<11)
+#define FPSCR_IXE		(1<<12)
+#define FPSCR_IDE		(1<<15)
+#define FPSCR_IOC		(1<<0)
+#define FPSCR_DZC		(1<<1)
+#define FPSCR_OFC		(1<<2)
+#define FPSCR_UFC		(1<<3)
+#define FPSCR_IXC		(1<<4)
+#define FPSCR_IDC		(1<<7)
+
+/* MVFR0 bits */
+#define MVFR0_A_SIMD_BIT	(0)
+#define MVFR0_A_SIMD_MASK	(0xf << MVFR0_A_SIMD_BIT)
+
+/* Bit patterns for decoding the packaged operation descriptors */
+#define VFPOPDESC_LENGTH_BIT	(9)
+#define VFPOPDESC_LENGTH_MASK	(0x07 << VFPOPDESC_LENGTH_BIT)
+#define VFPOPDESC_UNUSED_BIT	(24)
+#define VFPOPDESC_UNUSED_MASK	(0xFF << VFPOPDESC_UNUSED_BIT)
+#define VFPOPDESC_OPDESC_MASK	(~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK))
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
new file mode 100644
index 00000000000..422f3cc204a
--- /dev/null
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/include/asm/vfpmacros.h
+ *
+ * Assembler-only file containing VFP macros and register definitions.
+ */
+#include "vfp.h"
+
+@ Macros to allow building with old toolkits (with no VFP support)
+	.macro	VFPFMRX, rd, sysreg, cond
+	MRC\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMRX	\rd, \sysreg
+	.endm
+
+	.macro	VFPFMXR, sysreg, rd, cond
+	MCR\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMXR	\sysreg, \rd
+	.endm
+
+	@ read all the working registers back into the VFP
+	.macro	VFPFLDMIA, base, tmp
+#if __LINUX_ARM_ARCH__ < 6
+	LDC	p11, cr0, [\base],#33*4		    @ FLDMIAX \base!, {d0-d15}
+#else
+	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
+#endif
+#ifdef CONFIG_VFPv3
+	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
+	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
+	cmp	\tmp, #2			    @ 32 x 64bit registers?
+	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#endif
+	.endm
+
+	@ write all the working registers out of the VFP
+	.macro	VFPFSTMIA, base, tmp
+#if __LINUX_ARM_ARCH__ < 6
+	STC	p11, cr0, [\base],#33*4		    @ FSTMIAX \base!, {d0-d15}
+#else
+	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
+#endif
+#ifdef CONFIG_VFPv3
+	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
+	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
+	cmp	\tmp, #2			    @ 32 x 64bit registers?
+	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#endif
+	.endm
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
new file mode 100644
index 00000000000..6a3cd2a2f67
--- /dev/null
+++ b/arch/arm/include/asm/vga.h
@@ -0,0 +1,12 @@
+#ifndef ASMARM_VGA_H
+#define ASMARM_VGA_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))
+
+#define vga_readb(x)	(*((volatile unsigned char *)x))
+#define vga_writeb(x,y)	(*((volatile unsigned char *)y) = (x))
+
+#endif
diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h
new file mode 100644
index 00000000000..7604673dc42
--- /dev/null
+++ b/arch/arm/include/asm/xor.h
@@ -0,0 +1,141 @@
+/*
+ *  arch/arm/include/asm/xor.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm-generic/xor.h>
+
+#define __XOR(a1, a2) a1 ^= a2
+
+#define GET_BLOCK_2(dst) \
+	__asm__("ldmia	%0, {%1, %2}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2) \
+		: "0" (dst))
+
+#define GET_BLOCK_4(dst) \
+	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
+		: "0" (dst))
+
+#define XOR_BLOCK_2(src) \
+	__asm__("ldmia	%0!, {%1, %2}" \
+		: "=r" (src), "=r" (b1), "=r" (b2) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2);
+
+#define XOR_BLOCK_4(src) \
+	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
+		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
+
+#define PUT_BLOCK_2(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2))
+
+#define PUT_BLOCK_4(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
+
+static void
+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		XOR_BLOCK_4(p3);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		XOR_BLOCK_2(p5);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static struct xor_block_template xor_block_arm4regs = {
+	.name	= "arm4regs",
+	.do_2	= xor_arm4regs_2,
+	.do_3	= xor_arm4regs_3,
+	.do_4	= xor_arm4regs_4,
+	.do_5	= xor_arm4regs_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES			\
+	do {					\
+		xor_speed(&xor_block_arm4regs);	\
+		xor_speed(&xor_block_8regs);	\
+		xor_speed(&xor_block_32regs);	\
+	} while (0)
diff --git a/arch/arm/kernel/.gitignore b/arch/arm/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/arm/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index eb9092ca800..1d296fc8494 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 30a67a5a40a..09a061cb783 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -262,10 +262,10 @@
 /* 250 */	CALL(sys_epoll_create)
 		CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
 		CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
-	 	CALL(sys_remap_file_pages)
+		CALL(sys_remap_file_pages)
 		CALL(sys_ni_syscall)	/* sys_set_thread_area */
 /* 255 */	CALL(sys_ni_syscall)	/* sys_get_thread_area */
- 		CALL(sys_set_tid_address)
+		CALL(sys_set_tid_address)
 		CALL(sys_timer_create)
 		CALL(sys_timer_settime)
 		CALL(sys_timer_gettime)
@@ -364,6 +364,12 @@
 		CALL(sys_fallocate)
 		CALL(sys_timerfd_settime)
 		CALL(sys_timerfd_gettime)
+/* 355 */	CALL(sys_signalfd4)
+		CALL(sys_eventfd2)
+		CALL(sys_epoll_create1)
+		CALL(sys_dup3)
+		CALL(sys_pipe2)
+/* 360 */	CALL(sys_inotify_init1)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S
index a26886758c6..0ec9bb48fab 100644
--- a/arch/arm/kernel/crunch-bits.S
+++ b/arch/arm/kernel/crunch-bits.S
@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 /*
  * We can't use hex constants here due to a bug in gas.
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 627d79414c9..3b6a1c293ee 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -15,7 +15,7 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/thread_notify.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5617566477b..9550ff0ddde 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -80,7 +80,7 @@
 #endif	/* CONFIG_CPU_V6 */
 
 #else
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
 /*
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 8bfd299bfe7..7a50575a8d4 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -46,7 +46,7 @@
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/mach/irq.h>
@@ -783,7 +783,7 @@ static void ecard_proc_init(void)
 
 #define ec_set_resource(ec,nr,st,sz)				\
 	do {							\
-		(ec)->resource[nr].name = ec->dev.bus_id;	\
+		(ec)->resource[nr].name = dev_name(&ec->dev);	\
 		(ec)->resource[nr].start = st;			\
 		(ec)->resource[nr].end = (st) + (sz) - 1;	\
 		(ec)->resource[nr].flags = IORESOURCE_MEM;	\
@@ -853,8 +853,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 	for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
 		if (ec->resource[i].flags &&
 		    request_resource(&iomem_resource, &ec->resource[i])) {
-			printk(KERN_ERR "%s: resource(s) not available\n",
-				ec->dev.bus_id);
+			dev_err(&ec->dev, "resource(s) not available\n");
 			ec->resource[i].end -= ec->resource[i].start;
 			ec->resource[i].start = 0;
 			ec->resource[i].flags = 0;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7dca225752c..617e509d60d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -18,7 +18,7 @@
 #include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 
 #include "entry-header.S"
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 84694e88b42..060d7e2e9f6 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -10,7 +10,7 @@
 
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 
 #include "entry-header.S"
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 7e9c00a8a41..1c3c6ea5f9e 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -181,7 +181,7 @@ ENTRY(lookup_processor_type)
 	ldmfd	sp!, {r4 - r7, r9, pc}
 
 /*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
 	.long	__proc_info_begin
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 5d78ffb8a9a..27329bd3203 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 
 #include <asm/assembler.h>
-#include <asm/mach-types.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 11dcd52e51b..f88efb135b7 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -38,6 +38,7 @@
 #include <linux/proc_fs.h>
 
 #include <asm/system.h>
+#include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
 /*
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
new file mode 100644
index 00000000000..ba8ccfede96
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,199 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:  George Davis <davis_g@mvista.com>
+ *           Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/kgdb.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	int regno;
+
+	/* Initialize all to zero. */
+	for (regno = 0; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	gdb_regs[_R0]		= kernel_regs->ARM_r0;
+	gdb_regs[_R1]		= kernel_regs->ARM_r1;
+	gdb_regs[_R2]		= kernel_regs->ARM_r2;
+	gdb_regs[_R3]		= kernel_regs->ARM_r3;
+	gdb_regs[_R4]		= kernel_regs->ARM_r4;
+	gdb_regs[_R5]		= kernel_regs->ARM_r5;
+	gdb_regs[_R6]		= kernel_regs->ARM_r6;
+	gdb_regs[_R7]		= kernel_regs->ARM_r7;
+	gdb_regs[_R8]		= kernel_regs->ARM_r8;
+	gdb_regs[_R9]		= kernel_regs->ARM_r9;
+	gdb_regs[_R10]		= kernel_regs->ARM_r10;
+	gdb_regs[_FP]		= kernel_regs->ARM_fp;
+	gdb_regs[_IP]		= kernel_regs->ARM_ip;
+	gdb_regs[_SPT]		= kernel_regs->ARM_sp;
+	gdb_regs[_LR]		= kernel_regs->ARM_lr;
+	gdb_regs[_PC]		= kernel_regs->ARM_pc;
+	gdb_regs[_CPSR]		= kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	kernel_regs->ARM_r0	= gdb_regs[_R0];
+	kernel_regs->ARM_r1	= gdb_regs[_R1];
+	kernel_regs->ARM_r2	= gdb_regs[_R2];
+	kernel_regs->ARM_r3	= gdb_regs[_R3];
+	kernel_regs->ARM_r4	= gdb_regs[_R4];
+	kernel_regs->ARM_r5	= gdb_regs[_R5];
+	kernel_regs->ARM_r6	= gdb_regs[_R6];
+	kernel_regs->ARM_r7	= gdb_regs[_R7];
+	kernel_regs->ARM_r8	= gdb_regs[_R8];
+	kernel_regs->ARM_r9	= gdb_regs[_R9];
+	kernel_regs->ARM_r10	= gdb_regs[_R10];
+	kernel_regs->ARM_fp	= gdb_regs[_FP];
+	kernel_regs->ARM_ip	= gdb_regs[_IP];
+	kernel_regs->ARM_sp	= gdb_regs[_SPT];
+	kernel_regs->ARM_lr	= gdb_regs[_LR];
+	kernel_regs->ARM_pc	= gdb_regs[_PC];
+	kernel_regs->ARM_cpsr	= gdb_regs[_CPSR];
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+	struct pt_regs *thread_regs;
+	int regno;
+
+	/* Just making sure... */
+	if (task == NULL)
+		return;
+
+	/* Initialize to zero */
+	for (regno = 0; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	/* Otherwise, we have only some registers from switch_to() */
+	thread_regs		= task_pt_regs(task);
+	gdb_regs[_R0]		= thread_regs->ARM_r0;
+	gdb_regs[_R1]		= thread_regs->ARM_r1;
+	gdb_regs[_R2]		= thread_regs->ARM_r2;
+	gdb_regs[_R3]		= thread_regs->ARM_r3;
+	gdb_regs[_R4]		= thread_regs->ARM_r4;
+	gdb_regs[_R5]		= thread_regs->ARM_r5;
+	gdb_regs[_R6]		= thread_regs->ARM_r6;
+	gdb_regs[_R7]		= thread_regs->ARM_r7;
+	gdb_regs[_R8]		= thread_regs->ARM_r8;
+	gdb_regs[_R9]		= thread_regs->ARM_r9;
+	gdb_regs[_R10]		= thread_regs->ARM_r10;
+	gdb_regs[_FP]		= thread_regs->ARM_fp;
+	gdb_regs[_IP]		= thread_regs->ARM_ip;
+	gdb_regs[_SPT]		= thread_regs->ARM_sp;
+	gdb_regs[_LR]		= thread_regs->ARM_lr;
+	gdb_regs[_PC]		= thread_regs->ARM_pc;
+	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+			       int err_code, char *remcom_in_buffer,
+			       char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	unsigned long addr;
+	char *ptr;
+
+	switch (remcom_in_buffer[0]) {
+	case 'D':
+	case 'k':
+	case 'c':
+		/*
+		 * Try to read optional parameter, pc unchanged if no parm.
+		 * If this was a compiled breakpoint, we need to move
+		 * to the next instruction or we will just breakpoint
+		 * over and over again.
+		 */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->ARM_pc = addr;
+		else if (compiled_break == 1)
+			linux_regs->ARM_pc += 4;
+
+		compiled_break = 0;
+
+		return 0;
+	}
+
+	return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+	compiled_break = 1;
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+	.instr_mask		= 0xffffffff,
+	.instr_val		= KGDB_BREAKINST,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+	.instr_mask		= 0xffffffff,
+	.instr_val		= KGDB_COMPILED_BREAK,
+	.fn			= kgdb_compiled_brk_fn
+};
+
+/**
+ *	kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *	This function will handle the initalization of any architecture
+ *	specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+	register_undef_hook(&kgdb_brkpt_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+	return 0;
+}
+
+/**
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_undef_hook(&kgdb_brkpt_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+}
+
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+	.gdb_bpt_instr		= {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+	.gdb_bpt_instr		= {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 5ee39e10c8d..d28513f14d0 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	}
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	return (void *)orig_ret_address;
 }
 
-/* Called with kretprobe_lock held. */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index db8f54a3451..fae5beb3c3d 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -71,7 +71,7 @@ void machine_kexec(struct kimage *image)
 
 
 	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	cpu_proc_fin();
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 79b7e5cf541..a68259a0ccc 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 199b3680118..3fd88233706 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -51,7 +51,7 @@ extern void setup_mm_for_reboot(char mode);
 
 static volatile int hlt_counter;
 
-#include <asm/arch/system.h>
+#include <mach/system.h>
 
 void disable_hlt(void)
 {
@@ -162,7 +162,7 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 		leds_event(led_idle_start);
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		leds_event(led_idle_end);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b7b0720bc1b..2ca7038b67a 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/traps.h>
 
 #include "compat.h"
 #include "atags.h"
@@ -80,6 +81,8 @@ EXPORT_SYMBOL(system_serial_high);
 unsigned int elf_hwcap;
 EXPORT_SYMBOL(elf_hwcap);
 
+unsigned long __initdata vmalloc_reserve = 128 << 20;
+
 
 #ifdef MULTI_CPU
 struct processor processor;
@@ -500,6 +503,17 @@ static void __init early_mem(char **p)
 __early_param("mem=", early_mem);
 
 /*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static void __init early_vmalloc(char **arg)
+{
+	vmalloc_reserve = memparse(*arg, arg);
+}
+__early_param("vmalloc=", early_vmalloc);
+
+/*
  * Initial parsing of the command line.
  */
 static void __init parse_cmdline(char **cmdline_p, char *from)
@@ -853,6 +867,7 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &dummy_con;
 #endif
 #endif
+	early_trap_init();
 }
 
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 5a7c09564d1..e9842f6767f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -100,7 +100,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 * a 1:1 mapping for the physical address of the kernel.
 	 */
 	pgd = pgd_alloc(&init_mm);
-	pmd = pmd_offset(pgd, PHYS_OFFSET);
+	pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
 	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
 		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
 
@@ -139,7 +139,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
-	*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
+	*pmd = __pmd(0);
 	pgd_free(&init_mm, pgd);
 
 	if (ret) {
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index cc5145b28e7..368d171754c 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -130,7 +130,9 @@ static const struct leds_evt_name evt_names[] = {
 	{ "red",   led_red_on,   led_red_off   },
 };
 
-static ssize_t leds_store(struct sys_device *dev, const char *buf, size_t size)
+static ssize_t leds_store(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	int ret = -EINVAL, len = strcspn(buf, " ");
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 5595fdd75e8..872f1f8fbb5 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -288,14 +288,28 @@ void unregister_undef_hook(struct undef_hook *hook)
 	spin_unlock_irqrestore(&undef_lock, flags);
 }
 
+static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+{
+	struct undef_hook *hook;
+	unsigned long flags;
+	int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL;
+
+	spin_lock_irqsave(&undef_lock, flags);
+	list_for_each_entry(hook, &undef_hook, node)
+		if ((instr & hook->instr_mask) == hook->instr_val &&
+		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val)
+			fn = hook->fn;
+	spin_unlock_irqrestore(&undef_lock, flags);
+
+	return fn ? fn(regs, instr) : 1;
+}
+
 asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 {
 	unsigned int correction = thumb_mode(regs) ? 2 : 4;
 	unsigned int instr;
-	struct undef_hook *hook;
 	siginfo_t info;
 	void __user *pc;
-	unsigned long flags;
 
 	/*
 	 * According to the ARM ARM, PC is 2 or 4 bytes ahead,
@@ -325,17 +339,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	}
 #endif
 
-	spin_lock_irqsave(&undef_lock, flags);
-	list_for_each_entry(hook, &undef_hook, node) {
-		if ((instr & hook->instr_mask) == hook->instr_val &&
-		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
-			if (hook->fn(regs, instr) == 0) {
-				spin_unlock_irqrestore(&undef_lock, flags);
-				return;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&undef_lock, flags);
+	if (call_undef_hook(regs, instr) == 0)
+		return;
 
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
@@ -708,6 +713,11 @@ EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
 {
+	return;
+}
+
+void __init early_trap_init(void)
+{
 	unsigned long vectors = CONFIG_VECTORS_BASE;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S
index c55aaa2a208..8678eb2b7a6 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/lib/ecard.S
@@ -12,7 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define CPSR2SPSR(rt) \
 		mrs	rt, cpsr; \
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 1dd8ea4f9a9..2034d4dbe6a 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -20,7 +20,7 @@
  *		r2, r3 contains the zero-extended value
  *		lr corrupted
  *
- * No other registers must be altered.  (see include/asm-arm/uaccess.h
+ * No other registers must be altered.  (see <asm/uaccess.h>
  * for specific ASM register usage).
  *
  * Note that ADDR_LIMIT is either 0 or 0xc0000000.
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 4ef90418514..9aaf7c72065 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 1607a29f49b..cd34503e424 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 .Loutsw_bad_alignment:
 		adr	r0, .Loutsw_bad_align_msg
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 8620afe54f7..08ec7dffa52 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -20,7 +20,7 @@
  * Outputs:	r0 is the error code
  *		lr corrupted
  *
- * No other registers must be altered.  (see include/asm-arm/uaccess.h
+ * No other registers must be altered.  (see <asm/uaccess.h>
  * for specific ASM register usage).
  *
  * Note that ADDR_LIMIT is either 0 or 0xc0000000
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index ff6ece487ff..67c2bf4774b 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -29,7 +29,7 @@ ENTRY(sha_transform)
 	stmfd	sp!, {r4 - r8, lr}
 
 	@ for (i = 0; i < 16; i++)
-	@         W[i] = be32_to_cpu(in[i]); */
+	@         W[i] = be32_to_cpu(in[i]);
 
 #ifdef __ARMEB__
 	mov	r4, r0
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 83f57da3184..81a3ecc0d10 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -20,14 +20,14 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/aaed2000.h>
+#include <mach/aaed2000.h>
 
 #include "core.h"
 
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index b016be2b0e3..dfb26bc23d1 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,7 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
diff --git a/arch/arm/mach-aaec2000/include/mach/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
new file mode 100644
index 00000000000..bc729c42f84
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
@@ -0,0 +1,207 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaec2000.h
+ *
+ *  AAEC-2000 registers definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Chip selects */
+#define AAEC_CS0	0x00000000
+#define AAEC_CS1	0x10000000
+#define AAEC_CS2	0x20000000
+#define AAEC_CS3	0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE	AAEC_CS0
+#define AAEC_FLASH_SIZE	SZ_64M
+
+/* Interrupt controller */
+#define IRQ_BASE	__REG(0x80000500)
+#define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
+#define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */
+#define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */
+#define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE	__REG(0x80000600)
+#define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR	__REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR	__REG(0x8000060c) /* Control Register */
+#define UART1_SR	__REG(0x80000610) /* Status Register */
+#define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE	__REG(0x80000700)
+#define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR	__REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR	__REG(0x8000070c) /* Control Register */
+#define UART2_SR	__REG(0x80000710) /* Status Register */
+#define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE	__REG(0x80000800)
+#define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR	__REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR	__REG(0x8000080c) /* Control Register */
+#define UART3_SR	__REG(0x80000810) /* Status Register */
+#define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR		0x00
+#define UART_LCR	0x04
+#define UART_BRCR	0x08
+#define UART_CR		0x0c
+#define UART_SR		0x10
+#define UART_INT	0x14
+#define UART_INTM	0x18
+#define UART_INTRES	0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK	(1 << 0) /* Send Break */
+#define UART_LCR_PEN	(1 << 1) /* Parity Enable */
+#define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN	(1 << 0) /* UART Enable */
+#define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP	(1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS	(1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS	(1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS	(1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS	(1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE	__REG(0x80000c00)
+#define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */
+#define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */
+#define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */
+#define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE	__REG(0x80000d00)
+#define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */
+#define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */
+#define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */
+#define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE	__REG(0x80000e00)
+#define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */
+#define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */
+#define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */
+#define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start Timer) */
+#define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
+
+/* Power and State Control */
+#define POWER_BASE	__REG(0x80000400)
+#define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI	__REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
+
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS	0x80000e00
+
+#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS	0x80003000
+
+#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
new file mode 100644
index 00000000000..f821295ca71
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaed2000.h
+ *
+ *  AAED-2000 specific bits definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE	AAEC_CS3
+#define EXT_GPIO_VBASE	0xf8100000
+#define EXT_GPIO_LENGTH	0x00001000
+
+#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
new file mode 100644
index 00000000000..0b6351d7c38
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -0,0 +1,37 @@
+/*  arch/arm/mach-aaec2000/include/mach/debug-macro.S
+ *
+ *  Debugging macro include header
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include "hardware.h"
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000		@ physical
+		movne	\rx, #io_p2v(0x80000000)	@ virtual
+		orr	\rx, \rx, #0x00000800
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 7)
+		beq	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#if 0
+1001:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 5)
+		beq	1001b
+#endif
+		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h
new file mode 100644
index 00000000000..2da846c72fe
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/dma.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
new file mode 100644
index 00000000000..c8fb3446900
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/entry-macro.S
+ *
+ *  Low-level IRQ helper for aaec-2000 based platforms
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xf8000000
+		add	r4, r4, #0x00000500
+		mov	\base, r4
+		ldr	\irqstat, [\base, #0]
+		cmp	\irqstat, #0
+		bne	1001f
+		ldr	\irqnr, =NR_IRQS+1
+		b       1003f
+1001:		mov	\irqnr, #0
+1002:		ands	\tmp, \irqstat, #1
+		mov	\irqstat, \irqstat, LSR #1
+		add	\irqnr, \irqnr, #1
+		beq	1002b
+		sub	\irqnr, \irqnr, #1
+1003:
+		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h
new file mode 100644
index 00000000000..965a6f6672d
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/hardware.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/aaec2000.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE	0x80000000
+#define VIO_APB_BASE	0xf8000000
+#define IO_APB_LENGTH	0x2000
+#define PIO_AHB_BASE	0x80002000
+#define VIO_AHB_BASE	0xf8002000
+#define IO_AHB_LENGTH	0x2000
+
+#define VIO_BASE    VIO_APB_BASE
+#define PIO_BASE    PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x)   (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x)    io_p2v(x)
+#define __PREG(x)   io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
new file mode 100644
index 00000000000..c87c24de111
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/io.h
+ *
+ *  Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h
new file mode 100644
index 00000000000..bf45c6d2f29
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/irqs.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ	3  /* Media Changed Interrupt */
+#define INT_SC		4  /* Sound Codec Interrupt */
+#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
+#define INT_TICK	11 /* 64Hz Tick Interrupt */
+#define INT_UART1	12 /* UART1 Interrupt */
+#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD		14 /* LCD Interrupt */
+#define INT_SSI		15 /* SSI End of Transfer Interrupt */
+#define INT_UART3	16 /* UART3 Interrupt */
+#define INT_SCI		17 /* SCI Interrupt */
+#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC		19 /* MMC Interrupt */
+#define INT_USB		20 /* USB Interrupt */
+#define INT_DMA		21 /* DMA Interrupt */
+#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI		27 /* BMI Interrupt */
+
+#define NR_IRQS		(INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
new file mode 100644
index 00000000000..56ae900a482
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/memory.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#define PHYS_OFFSET	UL(0xf0000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * The nodes are the followings:
+ *
+ *   node 0: 0xf000.0000 - 0xf3ff.ffff
+ *   node 1: 0xf400.0000 - 0xf7ff.ffff
+ *   node 2: 0xf800.0000 - 0xfbff.ffff
+ *   node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
new file mode 100644
index 00000000000..8f4115d734c
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/mach-aaed2000/include/mach/system.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h
new file mode 100644
index 00000000000..6c8edf4a882
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/timex.h
+ *
+ *  AAEC-2000 Architecture timex specification
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		508000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h
new file mode 100644
index 00000000000..381ecad1a1b
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/uncompress.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+        do {
+		serial_port = _UART3_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART1_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART2_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while ((UART(UART_SR) & UART_SR_TxFF))
+		barrier();
+
+	/* send the character out. */
+	UART(UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
new file mode 100644
index 00000000000..551f68f666b
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/vmalloc.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5bad6b9b00d..a048b92cb40 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
-config MTD_NAND_AT91_BUSWIDTH_16
+config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
 	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
 	help
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 933fa8f55cb..638948c1677 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -17,10 +17,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91cap9.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 747b9dedab8..abb4aac8fa9 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -20,11 +20,11 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -376,8 +376,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -395,7 +395,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91cap9_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -404,7 +404,7 @@ static struct platform_device at91cap9_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -445,7 +445,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91cap9_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d688c1dbd92..28594fcc88e 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -14,9 +14,9 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_st.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index de19bee83f7..9338825cfcd 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -17,10 +17,10 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -368,8 +368,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -382,7 +382,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91rm9200_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned int csa;
 
@@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91rm9200_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 50392ff7151..a72e798a2a4 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -26,7 +26,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 380f12a1220..accb69ec478 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -15,11 +15,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 86cba4ac29b..7774d17dde7 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -16,12 +16,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -283,8 +283,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -302,7 +302,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9260_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -311,7 +311,7 @@ static struct platform_device at91sam9260_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -373,7 +373,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91sam9260_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 35bf6fd5251..7b51a59ae8b 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ec1891375df..6b89172310c 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,11 +20,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -198,8 +198,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -211,8 +211,8 @@ static struct resource nand_resources[] = {
 	}
 };
 
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
+static struct platform_device atmel_nand_device = {
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 052074a9f2d..80bfab5680e 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8a81f76f020..c93992f55dc 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -19,11 +19,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -352,8 +352,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -371,7 +371,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9263_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91sam9263_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 5cecbd7de6a..122fd77ed58 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -17,7 +17,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_pit.h>
+#include <mach/at91_pit.h>
 
 
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 902c79893ec..556bddf35b4 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -14,11 +14,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index ae28101e754..620886341fb 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -16,11 +16,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91sam9rl_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -194,8 +194,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -212,8 +212,8 @@ static struct resource nand_resources[] = {
 	}
 };
 
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
+static struct platform_device atmel_nand_device = {
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -222,7 +222,7 @@ static struct platform_device at91_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa;
 
@@ -259,11 +259,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index f44647738ee..ad3ec85b279 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -14,9 +14,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/at91x40.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/timex.h>
+#include <mach/at91x40.h>
+#include <mach/at91_st.h>
+#include <mach/timex.h>
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index eddc882f1b4..869b5e28d19 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -23,10 +23,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/time.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/at91_tc.h>
+#include <mach/at91_tc.h>
 
 /*
  *	3 counter/timer units present.
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 2d3d4b6f7b0..9b27d167bff 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index b22a1a00405..cdddca54b93 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return cam60_nand_partition;
 }
 
-static struct at91_nand_data __initdata cam60_nand_data = {
+static struct atmel_nand_data __initdata cam60_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	// .det_pin	= ... not there
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 8a2a958639d..196199552eb 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -33,7 +33,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,10 +42,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -181,14 +181,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return cap9adk_nand_partitions;
 }
 
-static struct at91_nand_data __initdata cap9adk_nand_data = {
+static struct atmel_nand_data __initdata cap9adk_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 //	.rdy_pin	= ... not connected
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void)
 	/* Serial */
 	at91_add_device_serial();
 	/* USB Host */
-	set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usbh(&cap9adk_usbh_data);
 	/* USB HS */
-	set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usba(&cap9adk_usba_udc_data);
 	/* SPI */
 	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* LCD Controller */
-	set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_lcdc(&cap9adk_lcdc_data);
 	/* AC97 */
 	at91_add_device_ac97(&cap9adk_ac97_data);
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 9854fc3dd1f..afa1ff0e957 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 81f1ebb4e96..cb7c9a8fa48 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index bb1a5474dda..8db8bd8babd 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index dab958d2592..43e1aa7ecef 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -147,7 +147,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return dk_nand_partition;
 }
 
-static struct at91_nand_data __initdata dk_nand_data = {
+static struct atmel_nand_data __initdata dk_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	.det_pin	= AT91_PIN_PB1,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 0c1e3858e7d..1f9d3cb64c5 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -24,10 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 #include "generic.h"
 
 static void __init at91eb01_map_io(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 3fe054e0056..528656761ff 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index e77fad44383..bfeee8a2af2 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 74aa4325eab..60626e7a349 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index cf1b7b2f76f..a87956c0a74 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index cb065febd95..fe9b9913fa3 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,10 +34,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -105,7 +105,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return kb9202_nand_partition;
 }
 
-static struct at91_nand_data __initdata kb9202_nand_data = {
+static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	// .det_pin	= ... not there
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 6acb55c09ae..dbc912d633c 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,9 +36,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 99b4ec3818d..4c28413426c 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -140,14 +140,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 8f76af5e219..e4910cb26c1 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -141,14 +141,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4d1d9c77708..cb20e70b3b0 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -28,7 +28,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -178,14 +178,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 08382c0df22..1a9963b811c 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,9 +44,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -183,14 +183,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b4cd5d0ed59..b1d11960a73 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -32,7 +32,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -187,14 +187,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 45617c20124..d4eba5c0ce0 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -26,7 +26,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -35,8 +35,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -143,13 +143,13 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 }
 
 /* det_pin is not connected */
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b6a70fc735c..c6dce49c388 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,9 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -96,7 +96,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 837aedf8ffe..f9d0b65da40 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -114,14 +114,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 95800d32bd4..673e5c27214 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -127,14 +127,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 7079050ab88..36b380aad00 100755..100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,9 +42,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -180,7 +180,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return yl9200_nand_partition;
 }
 
-static struct at91_nand_data __initdata yl9200_nand_data = {
+static struct atmel_nand_data __initdata yl9200_nand_data = {
 	.ale		= 6,
 	.cle		= 7,
 	// .det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 464bdbbf74d..f5c2847161f 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -24,11 +24,10 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/mach-types.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index ee4964abcaf..8392d5b517f 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/at91_pio.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
new file mode 100644
index 00000000000..8e7ed5c9081
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_adc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Analog-to-Digital Converter (ADC) registers.
+ * Based on AT91SAM9260 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ADC_H
+#define AT91_ADC_H
+
+#define AT91_ADC_CR		0x00		/* Control Register */
+#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
+#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
+
+#define AT91_ADC_MR		0x04		/* Mode Register */
+#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
+#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
+#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
+#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
+#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
+#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
+#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
+#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
+#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
+#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
+#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
+#define			AT91_ADC_STARTUP_(x)	((x) << 16)
+#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
+#define			AT91_ADC_SHTIM_(x)	((x) << 24)
+
+#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
+#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
+#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
+#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
+
+#define AT91_ADC_SR		0x1C		/* Status Register */
+#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
+#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
+#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
+#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
+#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
+#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
+
+#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
+#define		AT91_ADC_LDATA		(0x3ff)
+
+#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
+
+#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
+#define		AT91_ADC_DATA		(0x3ff)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
new file mode 100644
index 00000000000..03566799d3b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
+#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
+#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
+#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
+#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
+#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
+#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
+
+#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
+#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
+#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
+#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
+#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
+#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
+#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
+
+#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
+#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
+#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
+#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
+#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
+
+#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
new file mode 100644
index 00000000000..6dcaa771687
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#ifdef AT91_DBGU
+#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
+#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
+#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
+#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
+#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
+#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
+#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
+#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
+#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
+#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
+#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
+#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
+#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
+
+#endif /* AT91_DBGU */
+
+/*
+ * Some AT91 parts that don't have full DEBUG units still support the ID
+ * and extensions register.
+ */
+#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
+#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
+#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
+#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
+#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
+#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
+#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
+#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
+#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
+#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
+#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
+#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
+#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
+#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
+#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
+#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
+#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
+#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
+#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
+#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
+#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
new file mode 100644
index 00000000000..550d503a1bc
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_mci.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * MultiMedia Card Interface (MCI) registers.
+ * Based on AT91RM9200 datasheet revision F.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_MCI_H
+#define AT91_MCI_H
+
+#define AT91_MCI_CR		0x00		/* Control Register */
+#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
+#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
+#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
+#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
+#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define AT91_MCI_MR		0x04		/* Mode Register */
+#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
+#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
+#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
+#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
+#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
+#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
+
+#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
+#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
+#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
+#define		AT91_MCI_DTOMUL_1		(0 <<  4)
+#define		AT91_MCI_DTOMUL_16		(1 <<  4)
+#define		AT91_MCI_DTOMUL_128		(2 <<  4)
+#define		AT91_MCI_DTOMUL_256		(3 <<  4)
+#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
+#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
+#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
+#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
+
+#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
+#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
+#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
+
+#define AT91_MCI_ARGR		0x10		/* Argument Register */
+
+#define AT91_MCI_CMDR		0x14		/* Command Register */
+#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
+#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
+#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
+#define			AT91_MCI_RSPTYP_48	(1 <<  6)
+#define			AT91_MCI_RSPTYP_136	(2 <<  6)
+#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
+#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
+#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
+#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
+#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
+#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
+#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
+#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
+#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
+#define			AT91_MCI_TRCMD_NONE	(0 << 16)
+#define			AT91_MCI_TRCMD_START	(1 << 16)
+#define			AT91_MCI_TRCMD_STOP	(2 << 16)
+#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
+#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
+#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
+#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
+#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+
+#define AT91_MCI_BLKR		0x18		/* Block Register */
+#define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
+#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
+
+#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
+#define AT91_MCR_RDR		0x30		/* Receive Data Register */
+#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
+
+#define AT91_MCI_SR		0x40		/* Status Register */
+#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
+#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
+#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
+#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
+#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
+#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
+#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
+#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
+#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
+#define		AT91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B */
+#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
+#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
+#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
+#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
+#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
+#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
+#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
+#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
+#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
+#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
+#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
+
+#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
+#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
+#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
new file mode 100644
index 00000000000..c6a31bf8a5c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER		0x00	/* Enable Register */
+#define PIO_PDR		0x04	/* Disable Register */
+#define PIO_PSR		0x08	/* Status Register */
+#define PIO_OER		0x10	/* Output Enable Register */
+#define PIO_ODR		0x14	/* Output Disable Register */
+#define PIO_OSR		0x18	/* Output Status Register */
+#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
+#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
+#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
+#define PIO_SODR	0x30	/* Set Output Data Register */
+#define PIO_CODR	0x34	/* Clear Output Data Register */
+#define PIO_ODSR	0x38	/* Output Data Status Register */
+#define PIO_PDSR	0x3c	/* Pin Data Status Register */
+#define PIO_IER		0x40	/* Interrupt Enable Register */
+#define PIO_IDR		0x44	/* Interrupt Disable Register */
+#define PIO_IMR		0x48	/* Interrupt Mask Register */
+#define PIO_ISR		0x4c	/* Interrupt Status Register */
+#define PIO_MDER	0x50	/* Multi-driver Enable Register */
+#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
+#define PIO_MDSR	0x58	/* Multi-driver Status Register */
+#define PIO_PUDR	0x60	/* Pull-up Disable Register */
+#define PIO_PUER	0x64	/* Pull-up Enable Register */
+#define PIO_PUSR	0x68	/* Pull-up Status Register */
+#define PIO_ASR		0x70	/* Peripheral A Select Register */
+#define PIO_BSR		0x74	/* Peripheral B Select Register */
+#define PIO_ABSR	0x78	/* AB Status Register */
+#define PIO_OWER	0xa0	/* Output Write Enable Register */
+#define PIO_OWDR	0xa4	/* Output Write Disable Register */
+#define PIO_OWSR	0xa8	/* Output Write Status Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
new file mode 100644
index 00000000000..0448ac36ead
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
+#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
+#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
+#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
+
+#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
+#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
+
+#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
+#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
+#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
+#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
new file mode 100644
index 00000000000..2e3f2894b70
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -0,0 +1,111 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
+#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
+
+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+
+#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
+#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
+#define			AT91_PMC_USBDIV_1		(0 << 28)
+#define			AT91_PMC_USBDIV_2		(1 << 28)
+#define			AT91_PMC_USBDIV_4		(2 << 28)
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+
+#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_2			(1 << 2)
+#define			AT91_PMC_PRES_4			(2 << 2)
+#define			AT91_PMC_PRES_8			(3 << 2)
+#define			AT91_PMC_PRES_16		(4 << 2)
+#define			AT91_PMC_PRES_32		(5 << 2)
+#define			AT91_PMC_PRES_64		(6 << 2)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
+#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
+#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
+#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
+#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
+#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
+#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
+#define			AT91_PMC_PDIV_1			(0 << 12)
+#define			AT91_PMC_PDIV_2			(1 << 12)
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+
+#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
+#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
new file mode 100644
index 00000000000..7cd1b39aaa4
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
+#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
+#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
+#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
+#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
+#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
+#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
+#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
+#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
+#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
+#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
new file mode 100644
index 00000000000..e56f4701a3e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
+#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
+#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
+#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
+#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
+#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
+#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
+#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
+#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
+#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
+
+#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
+#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+
+#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
+#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
+#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
+#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
+#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
+
+#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
+#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
+#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
+#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
+#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
+#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
+
+#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
+#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
+#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
+#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
+
+#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
+#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
+#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
+
+#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
+#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
+#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
+#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
+#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
+#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
+
+#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
+#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
+#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
+#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
+
+#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
+#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
+#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
+#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
+#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
new file mode 100644
index 00000000000..71782e5d215
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtt.h
+ *
+ * Real-time Timer (RTT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#define AT91_RTT_MR		0x00			/* Real-time Mode Register */
+#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
+#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
+#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
+#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
+
+#define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
+#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
+
+#define AT91_RTT_VR		0x08			/* Real-time Value Register */
+#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
+
+#define AT91_RTT_SR		0x0c			/* Real-time Status Register */
+#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
+#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
new file mode 100644
index 00000000000..60be5ae624f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_shdwc.h
+ *
+ * Shutdown Controller (SHDWC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWC_H
+#define AT91_SHDWC_H
+
+#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
+#define		AT91_SHDW_SHDW		(1    << 0)		/* Shut Down command */
+#define		AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
+#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
+#define			AT91_SHDW_WKMODE0_NONE		0
+#define			AT91_SHDW_WKMODE0_HIGH		1
+#define			AT91_SHDW_WKMODE0_LOW		2
+#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
+#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
+#define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
+#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
+
+#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
+#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
+#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
+#define		AT91_SHDW_RTCWK		(1 << 17)		/* Real-time Clock Wake-up [SAM9RL] */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
new file mode 100644
index 00000000000..2f6ba0c5636
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_spi.h
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h
new file mode 100644
index 00000000000..a81114c11c7
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_ssc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SSC_H
+#define AT91_SSC_H
+
+#define AT91_SSC_CR		0x00	/* Control Register */
+#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
+#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
+#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
+#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
+#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
+
+#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
+#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
+
+#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
+#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
+#define			AT91_SSC_CKS_DIV		(0 << 0)
+#define			AT91_SSC_CKS_CLOCK		(1 << 0)
+#define			AT91_SSC_CKS_PIN		(2 << 0)
+#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
+#define			AT91_SSC_CKO_NONE		(0 << 2)
+#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
+#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
+#define			AT91_SSC_CKI_FALLING		(0 << 5)
+#define			AT91_SSC_CK_RISING		(1 << 5)
+#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
+#define			AT91_SSC_CKG_NONE		(0 << 6)
+#define			AT91_SSC_CKG_RFLOW		(1 << 6)
+#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
+#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
+#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
+#define			AT91_SSC_START_TX_RX		(1 << 8)
+#define			AT91_SSC_START_LOW_RF		(2 << 8)
+#define			AT91_SSC_START_HIGH_RF		(3 << 8)
+#define			AT91_SSC_START_FALLING_RF	(4 << 8)
+#define			AT91_SSC_START_RISING_RF	(5 << 8)
+#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
+#define			AT91_SSC_START_EDGE_RF		(7 << 8)
+#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
+#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
+#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
+
+#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
+#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
+#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
+#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
+#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
+#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
+#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
+#define			AT91_SSC_FSOS_NONE		(0 << 20)
+#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
+#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
+#define			AT91_SSC_FSOS_LOW		(3 << 20)
+#define			AT91_SSC_FSOS_HIGH		(4 << 20)
+#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
+#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
+#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
+#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
+
+#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
+#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
+#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
+#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
+#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
+#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
+
+#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
+#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
+
+#define AT91_SSC_SR		0x40	/* Status Register */
+#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
+#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
+#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
+#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
+#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
+#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
+#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
+#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
+#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
+#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
+#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
+#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
+#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
+#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
+
+#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
+#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
+#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
new file mode 100644
index 00000000000..8847173e410
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_st.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
+#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
+
+#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
+#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
+
+#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
+#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
+#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
+#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
+
+#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
+#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
+
+#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
+#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
+#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
+#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
+#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
+
+#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
+#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
+#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
+
+#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
+#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
+
+#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
+#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/include/mach/at91_tc.h
new file mode 100644
index 00000000000..46a317fd716
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_tc.h
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TC_H
+#define AT91_TC_H
+
+#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
+#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
+
+#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
+#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
+#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
+#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
+#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
+#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
+#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
+#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
+#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
+#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
+#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
+#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
+#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
+#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
+#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
+#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
+
+
+#define AT91_TC_CCR		0x00		/* Channel Control Register */
+#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
+#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
+#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
+
+#define AT91_TC_CMR		0x04		/* Channel Mode Register */
+#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
+#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
+#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
+#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
+#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
+#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
+#define			AT91_TC_XC0			(5 << 0)
+#define			AT91_TC_XC1			(6 << 0)
+#define			AT91_TC_XC2			(7 << 0)
+#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
+#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
+#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
+#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
+#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
+#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
+#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
+#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
+#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
+
+#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
+#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
+#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
+#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
+#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
+#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
+#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
+#define			AT91_TC_EEVT_TIOB		(0 << 10)
+#define			AT91_TC_EEVT_XC0		(1 << 10)
+#define			AT91_TC_EEVT_XC1		(2 << 10)
+#define			AT91_TC_EEVT_XC2		(3 << 10)
+#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
+#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
+#define			AT91_TC_WAVESEL_UP		(0 << 13)
+#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
+#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
+#define			AT91_TC_ACPA_NONE		(0 << 16)
+#define			AT91_TC_ACPA_SET		(1 << 16)
+#define			AT91_TC_ACPA_CLEAR		(2 << 16)
+#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
+#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
+#define			AT91_TC_ACPC_NONE		(0 << 18)
+#define			AT91_TC_ACPC_SET		(1 << 18)
+#define			AT91_TC_ACPC_CLEAR		(2 << 18)
+#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
+#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
+#define			AT91_TC_AEEVT_NONE		(0 << 20)
+#define			AT91_TC_AEEVT_SET		(1 << 20)
+#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
+#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
+#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
+#define			AT91_TC_ASWTRG_NONE		(0 << 22)
+#define			AT91_TC_ASWTRG_SET		(1 << 22)
+#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
+#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
+#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
+#define			AT91_TC_BCPB_NONE		(0 << 24)
+#define			AT91_TC_BCPB_SET		(1 << 24)
+#define			AT91_TC_BCPB_CLEAR		(2 << 24)
+#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
+#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
+#define			AT91_TC_BCPC_NONE		(0 << 26)
+#define			AT91_TC_BCPC_SET		(1 << 26)
+#define			AT91_TC_BCPC_CLEAR		(2 << 26)
+#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
+#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
+#define			AT91_TC_BEEVT_NONE		(0 << 28)
+#define			AT91_TC_BEEVT_SET		(1 << 28)
+#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
+#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
+#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
+#define			AT91_TC_BSWTRG_NONE		(0 << 30)
+#define			AT91_TC_BSWTRG_SET		(1 << 30)
+#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
+#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
+
+#define AT91_TC_CV		0x10		/* Counter Value */
+#define AT91_TC_RA		0x14		/* Register A */
+#define AT91_TC_RB		0x18		/* Register B */
+#define AT91_TC_RC		0x1c		/* Register C */
+
+#define AT91_TC_SR		0x20		/* Status Register */
+#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
+#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
+#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
+#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
+#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
+#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
+#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
+#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
+#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
+#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
+#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
+
+#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h
new file mode 100644
index 00000000000..bb2880f6ba3
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_twi.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_twi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Two-wire Interface (TWI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TWI_H
+#define AT91_TWI_H
+
+#define	AT91_TWI_CR		0x00		/* Control Register */
+#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
+#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
+#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
+#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
+#define		AT91_TWI_SVEN		(1 <<  4)	/* Slave Transfer Enable [SAM9260 only] */
+#define		AT91_TWI_SVDIS		(1 <<  5)	/* Slave Transfer Disable [SAM9260 only] */
+#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
+#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
+#define			AT91_TWI_IADRSZ_NO		(0 << 8)
+#define			AT91_TWI_IADRSZ_1		(1 << 8)
+#define			AT91_TWI_IADRSZ_2		(2 << 8)
+#define			AT91_TWI_IADRSZ_3		(3 << 8)
+#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
+#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
+
+#define	AT91_TWI_SMR		0x08		/* Slave Mode Register [SAM9260 only] */
+#define		AT91_TWI_SADR		(0x7f << 16)	/* Slave Address */
+
+#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
+
+#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
+#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
+#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
+#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
+
+#define	AT91_TWI_SR		0x20		/* Status Register */
+#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
+#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
+#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
+#define		AT91_TWI_SVREAD		(1 <<  3)	/* Slave Read [SAM9260 only] */
+#define		AT91_TWI_SVACC		(1 <<  4)	/* Slave Access [SAM9260 only] */
+#define		AT91_TWI_GACC		(1 <<  5)	/* General Call Access [SAM9260 only] */
+#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
+#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
+#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
+#define		AT91_TWI_ARBLST		(1 <<  9)	/* Arbitration Lost [SAM9260 only] */
+#define		AT91_TWI_SCLWS		(1 << 10)	/* Clock Wait State [SAM9260 only] */
+#define		AT91_TWI_EOSACC		(1 << 11)	/* End of Slave Address [SAM9260 only] */
+
+#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
+#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
+#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
+#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
+#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
+
+#endif
+
diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
new file mode 100644
index 00000000000..973b4526a98
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_wdt.h
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
+#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
+#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
+#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
+#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
+#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
+#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
+#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
+#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
+#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
+#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+
+#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
+#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
+#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
new file mode 100644
index 00000000000..4a4b64135a9
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0		8	/* USART 0 */
+#define AT91CAP9_ID_US1		9	/* USART 1 */
+#define AT91CAP9_ID_US2		10	/* USART 2 */
+#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN		13	/* CAN */
+#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
+#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC	22	/* Ethernet */
+#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
+#define AT91CAP9_ID_DMA		27	/* DMA Controller */
+#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP		29	/* USB Host Port */
+#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS		0xfff78000
+#define AT91CAP9_BASE_TCB0		0xfff7c000
+#define AT91CAP9_BASE_TC0		0xfff7c000
+#define AT91CAP9_BASE_TC1		0xfff7c040
+#define AT91CAP9_BASE_TC2		0xfff7c080
+#define AT91CAP9_BASE_MCI0		0xfff80000
+#define AT91CAP9_BASE_MCI1		0xfff84000
+#define AT91CAP9_BASE_TWI		0xfff88000
+#define AT91CAP9_BASE_US0		0xfff8c000
+#define AT91CAP9_BASE_US1		0xfff90000
+#define AT91CAP9_BASE_US2		0xfff94000
+#define AT91CAP9_BASE_SSC0		0xfff98000
+#define AT91CAP9_BASE_SSC1		0xfff9c000
+#define AT91CAP9_BASE_AC97C		0xfffa0000
+#define AT91CAP9_BASE_SPI0		0xfffa4000
+#define AT91CAP9_BASE_SPI1		0xfffa8000
+#define AT91CAP9_BASE_CAN		0xfffac000
+#define AT91CAP9_BASE_PWMC		0xfffb8000
+#define AT91CAP9_BASE_EMAC		0xfffbc000
+#define AT91CAP9_BASE_ADC		0xfffc0000
+#define AT91CAP9_BASE_ISI		0xfffc4000
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91CAP9_BASE_US0
+#define AT91_USART1	AT91CAP9_BASE_US1
+#define AT91_USART2	AT91CAP9_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
new file mode 100644
index 00000000000..bca878f3bd8
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+ *
+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_DDRSDR_H
+#define AT91CAP9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
+#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_DDRSDRC_MODE_NORMAL		0
+#define			AT91_DDRSDRC_MODE_NOP		1
+#define			AT91_DDRSDRC_MODE_PRECHARGE	2
+#define			AT91_DDRSDRC_MODE_LMR		3
+#define			AT91_DDRSDRC_MODE_REFRESH	4
+#define			AT91_DDRSDRC_MODE_EXT_LMR	5
+#define			AT91_DDRSDRC_MODE_DEEP		6
+
+#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
+#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
+#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
+#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
+#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
+#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
+#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
+#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
+#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
+#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
+#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_DDRSDRC_NR_11	(0 << 2)
+#define			AT91_DDRSDRC_NR_12	(1 << 2)
+#define			AT91_DDRSDRC_NR_13	(2 << 2)
+#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
+#define			AT91_DDRSDRC_CAS_2	(2 << 4)
+#define			AT91_DDRSDRC_CAS_3	(3 << 4)
+#define			AT91_DDRSDRC_CAS_25	(6 << 4)
+#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
+#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
+
+#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
+#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
+#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
+#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
+#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
+#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
+#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
+#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
+#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
+#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
+#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
+#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
+
+#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
+#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_DDRSDRC_LPCB_DISABLE		0
+#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
+#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
+#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
+#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
+#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
+#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_DDRSDRC_MD_SDR		0
+#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91_DDRSDRC_MD_DDR		2
+#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
+
+#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
+#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
+#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
+#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
+#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
+#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
+#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
+#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
new file mode 100644
index 00000000000..4b9d4aff4b4
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
@@ -0,0 +1,137 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_UDPHS	(AT91_MATRIX + 0x118)	/* USBHS Special Function Register [AT91CAP9 only] */
+#define		AT91_MATRIX_SELECT_UDPHS	(0 << 31)	/* select High Speed UDP */
+#define		AT91_MATRIX_SELECT_UDP		(1 << 31)	/* select standard UDP */
+#define		AT91_MATRIX_UDPHS_BYPASS_LOCK	(1 << 30)	/* bypass lock bit */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
new file mode 100644
index 00000000000..78983155a07
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_H
+#define AT91RM9200_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91RM9200_ID_US0	6	/* USART 0 */
+#define AT91RM9200_ID_US1	7	/* USART 1 */
+#define AT91RM9200_ID_US2	8	/* USART 2 */
+#define AT91RM9200_ID_US3	9	/* USART 3 */
+#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP	11	/* USB Device Port */
+#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
+#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
+#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
+#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
+#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
+#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
+#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
+#define AT91RM9200_ID_UHP	23	/* USB Host port */
+#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
+
+
+/*
+ * Peripheral physical base addresses.
+ */
+#define AT91RM9200_BASE_TCB0	0xfffa0000
+#define AT91RM9200_BASE_TC0	0xfffa0000
+#define AT91RM9200_BASE_TC1	0xfffa0040
+#define AT91RM9200_BASE_TC2	0xfffa0080
+#define AT91RM9200_BASE_TCB1	0xfffa4000
+#define AT91RM9200_BASE_TC3	0xfffa4000
+#define AT91RM9200_BASE_TC4	0xfffa4040
+#define AT91RM9200_BASE_TC5	0xfffa4080
+#define AT91RM9200_BASE_UDP	0xfffb0000
+#define AT91RM9200_BASE_MCI	0xfffb4000
+#define AT91RM9200_BASE_TWI	0xfffb8000
+#define AT91RM9200_BASE_EMAC	0xfffbc000
+#define AT91RM9200_BASE_US0	0xfffc0000
+#define AT91RM9200_BASE_US1	0xfffc4000
+#define AT91RM9200_BASE_US2	0xfffc8000
+#define AT91RM9200_BASE_US3	0xfffcc000
+#define AT91RM9200_BASE_SSC0	0xfffd0000
+#define AT91RM9200_BASE_SSC1	0xfffd4000
+#define AT91RM9200_BASE_SSC2	0xfffd8000
+#define AT91RM9200_BASE_SPI	0xfffe0000
+#define AT91_BASE_SYS		0xfffff000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
+#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
+#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
+
+#define AT91_USART0	AT91RM9200_BASE_US0
+#define AT91_USART1	AT91RM9200_BASE_US1
+#define AT91_USART2	AT91RM9200_BASE_US2
+#define AT91_USART3	AT91RM9200_BASE_US3
+
+#define AT91_MATRIX	0	/* not supported */
+
+/*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
new file mode 100644
index 00000000000..b8260cd8041
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_emac.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Ethernet MAC registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_EMAC_H
+#define AT91RM9200_EMAC_H
+
+#define	AT91_EMAC_CTL		0x00	/* Control Register */
+#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
+#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
+#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
+#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
+#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
+#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
+#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
+#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
+#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
+
+#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
+#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
+#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
+#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
+#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
+#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
+#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
+#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
+#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
+#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
+#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
+#define		AT91_EMAC_CLK_DIV8		(0 << 10)
+#define		AT91_EMAC_CLK_DIV16		(1 << 10)
+#define		AT91_EMAC_CLK_DIV32		(2 << 10)
+#define		AT91_EMAC_CLK_DIV64		(3 << 10)
+#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
+#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
+
+#define	AT91_EMAC_SR		0x08	/* Status Register */
+#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
+#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
+#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
+
+#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
+
+#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
+#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
+#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
+
+#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
+#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
+#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
+#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
+#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
+#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
+#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
+
+#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
+
+#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
+#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
+#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
+#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
+
+#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
+#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
+#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
+#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
+#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
+#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
+#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
+#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
+#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
+#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
+#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
+#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
+
+#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
+#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
+#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
+
+#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
+#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
+#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
+#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
+#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
+#define			AT91_EMAC_RW_W		(1 << 28)
+#define			AT91_EMAC_RW_R		(2 << 28)
+#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
+
+/*
+ * Statistics Registers.
+ */
+#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
+#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
+#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
+#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
+#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
+#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
+#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
+#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
+#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
+#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
+#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
+#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
+#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
+#define AT91_EMAC_CDE		0x74	/* Code Error */
+#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
+#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
+#define AT91_EMAC_USF		0x80	/* Undersize Frame */
+#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
+
+/*
+ * Address Registers.
+ */
+#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
+#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
+#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
+#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
+#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
+#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
+#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
+#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
+#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
+#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
new file mode 100644
index 00000000000..d34e4ed8934
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -0,0 +1,160 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
+#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
+
+#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
+#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
+#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
+#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
+#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
+#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
+#define			AT91_MC_ABTSZ_WORD		(2 << 8)
+#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
+#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
+#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
+#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
+#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
+#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
+#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
+#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
+#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
+#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
+#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
+#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
+
+#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
+#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
+#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
+#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
+#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
+#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
+#define			AT91_EBI_CS0A_SMC		(0 << 0)
+#define			AT91_EBI_CS0A_BFC		(1 << 0)
+#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
+#define			AT91_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
+#define			AT91_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
+#define			AT91_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
+#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
+#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
+#define			AT91_SMC_NWS_(x)	((x) << 0)
+#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
+#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
+#define			AT91_SMC_TDF_(x)	((x) << 8)
+#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
+#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
+#define			AT91_SMC_DBW_16		(1 << 13)
+#define			AT91_SMC_DBW_8		(2 << 13)
+#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
+#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
+#define			AT91_SMC_ACSS_STD	(0 << 16)
+#define			AT91_SMC_ACSS_1		(1 << 16)
+#define			AT91_SMC_ACSS_2		(2 << 16)
+#define			AT91_SMC_ACSS_3		(3 << 16)
+#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
+#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
+#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
+#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
+#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
+#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
+#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
+#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
+#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 4)
+#define			AT91_SDRAMC_DBW_16	(1 << 4)
+
+#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
+#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
+#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
+#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
+#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
+#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
+#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
+#define			AT91_BFC_BFCOM_BURST	(2 << 0)
+#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
+#define			AT91_BFC_BFCC_MCK	(1 << 2)
+#define			AT91_BFC_BFCC_DIV2	(2 << 2)
+#define			AT91_BFC_BFCC_DIV4	(3 << 2)
+#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
+#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
+#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
+#define			AT91_BFC_PAGES_16	(1 << 8)
+#define			AT91_BFC_PAGES_32	(2 << 8)
+#define			AT91_BFC_PAGES_64	(3 << 8)
+#define			AT91_BFC_PAGES_128	(4 << 8)
+#define			AT91_BFC_PAGES_256	(5 << 8)
+#define			AT91_BFC_PAGES_512	(6 << 8)
+#define			AT91_BFC_PAGES_1024	(7 << 8)
+#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
+#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
+#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
+#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
+#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
new file mode 100644
index 00000000000..43c396b9b4c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * Includes also definitions for AT91SAM9XE and AT91SAM9G families
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0	6	/* USART 0 */
+#define AT91SAM9260_ID_US1	7	/* USART 1 */
+#define AT91SAM9260_ID_US2	8	/* USART 2 */
+#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP	20	/* USB Host port */
+#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
+#define AT91SAM9260_ID_US3	23	/* USART 3 */
+#define AT91SAM9260_ID_US4	24	/* USART 4 */
+#define AT91SAM9260_ID_US5	25	/* USART 5 */
+#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0		0xfffa0000
+#define AT91SAM9260_BASE_TC0		0xfffa0000
+#define AT91SAM9260_BASE_TC1		0xfffa0040
+#define AT91SAM9260_BASE_TC2		0xfffa0080
+#define AT91SAM9260_BASE_UDP		0xfffa4000
+#define AT91SAM9260_BASE_MCI		0xfffa8000
+#define AT91SAM9260_BASE_TWI		0xfffac000
+#define AT91SAM9260_BASE_US0		0xfffb0000
+#define AT91SAM9260_BASE_US1		0xfffb4000
+#define AT91SAM9260_BASE_US2		0xfffb8000
+#define AT91SAM9260_BASE_SSC		0xfffbc000
+#define AT91SAM9260_BASE_ISI		0xfffc0000
+#define AT91SAM9260_BASE_EMAC		0xfffc4000
+#define AT91SAM9260_BASE_SPI0		0xfffc8000
+#define AT91SAM9260_BASE_SPI1		0xfffcc000
+#define AT91SAM9260_BASE_US3		0xfffd0000
+#define AT91SAM9260_BASE_US4		0xfffd4000
+#define AT91SAM9260_BASE_US5		0xfffd8000
+#define AT91SAM9260_BASE_TCB1		0xfffdc000
+#define AT91SAM9260_BASE_TC3		0xfffdc000
+#define AT91SAM9260_BASE_TC4		0xfffdc040
+#define AT91SAM9260_BASE_TC5		0xfffdc080
+#define AT91SAM9260_BASE_ADC		0xfffe0000
+#define AT91_BASE_SYS			0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9260_BASE_US0
+#define AT91_USART1	AT91SAM9260_BASE_US1
+#define AT91_USART2	AT91SAM9260_BASE_US2
+#define AT91_USART3	AT91SAM9260_BASE_US3
+#define AT91_USART4	AT91SAM9260_BASE_US4
+#define AT91_USART5	AT91SAM9260_BASE_US5
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
+
+#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+
+#define AT91SAM9G20_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9G20_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9G20_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9G20_SRAM0_SIZE	SZ_16K		/* Internal SRAM 0 size (16Kb) */
+#define AT91SAM9G20_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9G20_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9G20_UHP_BASE	0x00500000	/* USB Host controller */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
new file mode 100644
index 00000000000..f027de5df95
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
new file mode 100644
index 00000000000..3a348ca2077
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9261.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0	6	/* USART 0 */
+#define AT91SAM9261_ID_US1	7	/* USART 1 */
+#define AT91SAM9261_ID_US2	8	/* USART 2 */
+#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP	20	/* USB Host port */
+#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
+#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0		0xfffa0000
+#define AT91SAM9261_BASE_TC0		0xfffa0000
+#define AT91SAM9261_BASE_TC1		0xfffa0040
+#define AT91SAM9261_BASE_TC2		0xfffa0080
+#define AT91SAM9261_BASE_UDP		0xfffa4000
+#define AT91SAM9261_BASE_MCI		0xfffa8000
+#define AT91SAM9261_BASE_TWI		0xfffac000
+#define AT91SAM9261_BASE_US0		0xfffb0000
+#define AT91SAM9261_BASE_US1		0xfffb4000
+#define AT91SAM9261_BASE_US2		0xfffb8000
+#define AT91SAM9261_BASE_SSC0		0xfffbc000
+#define AT91SAM9261_BASE_SSC1		0xfffc0000
+#define AT91SAM9261_BASE_SSC2		0xfffc4000
+#define AT91SAM9261_BASE_SPI0		0xfffc8000
+#define AT91SAM9261_BASE_SPI1		0xfffcc000
+#define AT91_BASE_SYS			0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9261_BASE_US0
+#define AT91_USART1	AT91SAM9261_BASE_US1
+#define AT91_USART2	AT91SAM9261_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
+#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
new file mode 100644
index 00000000000..db62b1f1830
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
+#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define			AT91_MATRIX_ITCM_64		(7 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
+#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
new file mode 100644
index 00000000000..2091f1e42d4
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0	7	/* USART 0 */
+#define AT91SAM9263_ID_US1	8	/* USART 1 */
+#define AT91SAM9263_ID_US2	9	/* USART 2 */
+#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN	12	/* CAN */
+#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
+#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
+#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
+#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
+#define AT91SAM9263_ID_UHP	29	/* USB Host port */
+#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP		0xfff78000
+#define AT91SAM9263_BASE_TCB0		0xfff7c000
+#define AT91SAM9263_BASE_TC0		0xfff7c000
+#define AT91SAM9263_BASE_TC1		0xfff7c040
+#define AT91SAM9263_BASE_TC2		0xfff7c080
+#define AT91SAM9263_BASE_MCI0		0xfff80000
+#define AT91SAM9263_BASE_MCI1		0xfff84000
+#define AT91SAM9263_BASE_TWI		0xfff88000
+#define AT91SAM9263_BASE_US0		0xfff8c000
+#define AT91SAM9263_BASE_US1		0xfff90000
+#define AT91SAM9263_BASE_US2		0xfff94000
+#define AT91SAM9263_BASE_SSC0		0xfff98000
+#define AT91SAM9263_BASE_SSC1		0xfff9c000
+#define AT91SAM9263_BASE_AC97C		0xfffa0000
+#define AT91SAM9263_BASE_SPI0		0xfffa4000
+#define AT91SAM9263_BASE_SPI1		0xfffa8000
+#define AT91SAM9263_BASE_CAN		0xfffac000
+#define AT91SAM9263_BASE_PWMC		0xfffb8000
+#define AT91SAM9263_BASE_EMAC		0xfffbc000
+#define AT91SAM9263_BASE_ISI		0xfffc4000
+#define AT91SAM9263_BASE_2DGE		0xfffc8000
+#define AT91_BASE_SYS			0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9263_BASE_US0
+#define AT91_USART1	AT91SAM9263_BASE_US1
+#define AT91_USART2	AT91SAM9263_BASE_US2
+
+#define AT91_SMC	AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
+#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
+#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
new file mode 100644
index 00000000000..9b3efd3eb2f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
new file mode 100644
index 00000000000..1921181c63c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+ *
+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SDRAMC_H
+#define AT91SAM9_SDRAMC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		0
+#define			AT91_SDRAMC_MODE_NOP		1
+#define			AT91_SDRAMC_MODE_PRECHARGE	2
+#define			AT91_SDRAMC_MODE_LMR		3
+#define			AT91_SDRAMC_MODE_REFRESH	4
+#define			AT91_SDRAMC_MODE_EXT_LMR	5
+#define			AT91_SDRAMC_MODE_DEEP		6
+
+#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_1	(1 << 5)
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define			AT91_SDRAMC_CAS_3	(3 << 5)
+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 7)
+#define			AT91_SDRAMC_DBW_16	(1 << 7)
+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_SDRAMC_LPCB_DISABLE		0
+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strength */
+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_SDRAMC_MD_SDRAM		0
+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
new file mode 100644
index 00000000000..ec6ad1338b5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_smc.h
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SMC_H
+#define AT91SAM9_SMC_H
+
+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
+
+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
+
+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
+#define			AT91_SMC_BAT_SELECT		(0 << 8)
+#define			AT91_SMC_BAT_WRITE		(1 << 8)
+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
+#define			AT91_SMC_DBW_8			(0 << 12)
+#define			AT91_SMC_DBW_16			(1 << 12)
+#define			AT91_SMC_DBW_32			(2 << 12)
+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
+#define			AT91_SMC_TDF_(x)		((x) << 16)
+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
+#define			AT91_SMC_PS_4			(0 << 28)
+#define			AT91_SMC_PS_8			(1 << 28)
+#define			AT91_SMC_PS_16			(2 << 28)
+#define			AT91_SMC_PS_32			(3 << 28)
+
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
new file mode 100644
index 00000000000..fc2de6c09c8
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller */
+#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0	6	/* USART 0 */
+#define AT91SAM9RL_ID_US1	7	/* USART 1 */
+#define AT91SAM9RL_ID_US2	8	/* USART 2 */
+#define AT91SAM9RL_ID_US3	9	/* USART 3 */
+#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
+#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
+#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
+#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0	0xfffa0000
+#define AT91SAM9RL_BASE_TC0	0xfffa0000
+#define AT91SAM9RL_BASE_TC1	0xfffa0040
+#define AT91SAM9RL_BASE_TC2	0xfffa0080
+#define AT91SAM9RL_BASE_MCI	0xfffa4000
+#define AT91SAM9RL_BASE_TWI0	0xfffa8000
+#define AT91SAM9RL_BASE_TWI1	0xfffac000
+#define AT91SAM9RL_BASE_US0	0xfffb0000
+#define AT91SAM9RL_BASE_US1	0xfffb4000
+#define AT91SAM9RL_BASE_US2	0xfffb8000
+#define AT91SAM9RL_BASE_US3	0xfffbc000
+#define AT91SAM9RL_BASE_SSC0	0xfffc0000
+#define AT91SAM9RL_BASE_SSC1	0xfffc4000
+#define AT91SAM9RL_BASE_PWMC	0xfffc8000
+#define AT91SAM9RL_BASE_SPI	0xfffcc000
+#define AT91SAM9RL_BASE_TSC	0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
+#define AT91SAM9RL_BASE_AC97C	0xfffd8000
+#define AT91_BASE_SYS		0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9RL_BASE_US0
+#define AT91_USART1	AT91SAM9RL_BASE_US1
+#define AT91_USART2	AT91SAM9RL_BASE_US2
+#define AT91_USART3	AT91SAM9RL_BASE_US3
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9RL_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
new file mode 100644
index 00000000000..5f9149071fe
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
new file mode 100644
index 00000000000..d34cdb8abdc
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91x40.h
+ *
+ * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91X40_H
+#define AT91X40_H
+
+/*
+ *	IRQ list.
+ */
+#define AT91_ID_FIQ		0	/* FIQ */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91X40_ID_USART0	2	/* USART port 0 */
+#define AT91X40_ID_USART1	3	/* USART port 1 */
+#define AT91X40_ID_TC0		4	/* Timer/Counter 0 */
+#define AT91X40_ID_TC1		5	/* Timer/Counter 1*/
+#define AT91X40_ID_TC2		6	/* Timer/Counter 2*/
+#define AT91X40_ID_WD		7	/* Watchdog? */
+#define AT91X40_ID_PIOA		8	/* Parallel IO Controller A */
+
+#define AT91X40_ID_IRQ0		16	/* External IRQ 0 */
+#define AT91X40_ID_IRQ1		17	/* External IRQ 1 */
+#define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_BASE_SYS	0xffc00000
+
+#define AT91_EBI	(0xffe00000 - AT91_BASE_SYS)	/* External Bus Interface */
+#define AT91_SF		(0xfff00000 - AT91_BASE_SYS)	/* Special Function */
+#define AT91_USART1	(0xfffcc000 - AT91_BASE_SYS)	/* USART 1 */
+#define AT91_USART0	(0xfffd0000 - AT91_BASE_SYS)	/* USART 0 */
+#define AT91_TC		(0xfffe0000 - AT91_BASE_SYS)	/* Timer Counter */
+#define AT91_PIOA	(0xffff0000 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PS		(0xffff4000 - AT91_BASE_SYS)	/* Power Save */
+#define AT91_WD		(0xffff8000 - AT91_BASE_SYS)	/* Watchdog Timer */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+
+/*
+ * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
+ * But it does have a chip identify register and extension ID, so define at
+ * least these here.
+ */
+#define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
+#define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
+
+#endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
new file mode 100644
index 00000000000..acd60f2a072
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-at91/include/mach/board.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers.  For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+
+ /* USB Device */
+struct at91_udc_data {
+	u8	vbus_pin;		/* high == host powering us */
+	u8	pullup_pin;		/* active == D+ pulled up */
+	u8	pullup_active_low;	/* true == pullup_pin is active low */
+};
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
+ /* Compact Flash */
+struct at91_cf_data {
+	u8	irq_pin;		/* I/O IRQ */
+	u8	det_pin;		/* Card detect */
+	u8	vcc_pin;		/* power switching */
+	u8	rst_pin;		/* card reset */
+	u8	chipselect;		/* EBI Chip Select number */
+};
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+struct at91_mmc_data {
+	u8		det_pin;	/* card detect IRQ */
+	unsigned	slot_b:1;	/* uses Slot B */
+	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
+	u8		wp_pin;		/* (SD) writeprotect detect */
+	u8		vcc_pin;	/* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
+
+ /* Ethernet (EMAC & MACB) */
+struct at91_eth_data {
+	u32		phy_mask;
+	u8		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#define eth_platform_data	at91_eth_data
+#endif
+
+ /* USB Host */
+struct at91_usbh_data {
+	u8		ports;		/* number of ports on root hub */
+	u8		vbus_pin[];	/* port power-control pin */
+};
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+ /* NAND / SmartMedia */
+struct atmel_nand_data {
+	u8		enable_pin;	/* chip enable */
+	u8		det_pin;	/* card detect */
+	u8		rdy_pin;	/* ready/busy */
+	u8		ale;		/* address line number connected to ALE */
+	u8		cle;		/* address line number connected to CLE */
+	u8		bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition* (*partition_info)(int, int*);
+};
+extern void __init at91_add_device_nand(struct atmel_nand_data *data);
+
+ /* I2C*/
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+#define ATMEL_UART_CTS	0x01
+#define ATMEL_UART_RTS	0x02
+#define ATMEL_UART_DSR	0x04
+#define ATMEL_UART_DTR	0x08
+#define ATMEL_UART_DCD	0x10
+#define ATMEL_UART_RI	0x20
+
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
+extern void __init at91_set_serial_console(unsigned portnr);
+
+struct at91_uart_config {
+	unsigned short	console_tty;	/* tty number of serial console */
+	unsigned short	nr_tty;		/* number of serial tty's */
+	short		tty_map[];	/* map UART to tty number */
+};
+extern struct platform_device *atmel_default_console_device;
+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+extern void __init at91_add_device_serial(void);
+
+/*
+ * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
+ * platform devices.  Their SSC ID is part of their configuration data,
+ * along with information about which SSC signals they should use.
+ */
+#define ATMEL_SSC_TK	0x01
+#define ATMEL_SSC_TF	0x02
+#define ATMEL_SSC_TD	0x04
+#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK	0x10
+#define ATMEL_SSC_RF	0x20
+#define ATMEL_SSC_RD	0x40
+#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
+
+ /* LCD Controller */
+struct atmel_lcdfb_info;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+
+ /* AC97 */
+struct atmel_ac97_data {
+	u8		reset_pin;	/* reset */
+};
+extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+
+ /* ISI */
+extern void __init at91_add_device_isi(void);
+
+ /* LEDs */
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
new file mode 100644
index 00000000000..dbfd9f73f80
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/mach-at91/include/mach/cpu.h
+ *
+ *  Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200	0x09290780
+#define ARCH_ID_AT91SAM9260	0x019803a0
+#define ARCH_ID_AT91SAM9261	0x019703a0
+#define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G20	0x019905a0
+#define ARCH_ID_AT91SAM9RL64	0x019b03a0
+#define ARCH_ID_AT91CAP9	0x039A03A0
+
+#define ARCH_ID_AT91SAM9XE128	0x329973a0
+#define ARCH_ID_AT91SAM9XE256	0x329a93a0
+#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
+
+#define ARCH_ID_AT91M40800	0x14080044
+#define ARCH_ID_AT91R40807	0x44080746
+#define ARCH_ID_AT91M40807	0x14080745
+#define ARCH_ID_AT91R40008	0x44000840
+
+static inline unsigned long at91_cpu_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#define ARCH_FAMILY_AT91X92	0x09200000
+#define ARCH_FAMILY_AT91SAM9	0x01900000
+#define ARCH_FAMILY_AT91SAM9XE	0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
+#else
+#define cpu_is_at91sam9xe()	(0)
+#define cpu_is_at91sam9260()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9G20
+#define cpu_is_at91sam9g20()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
+#else
+#define cpu_is_at91sam9g20()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9RL
+#define cpu_is_at91sam9rl()	(at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
+#else
+#define cpu_is_at91sam9rl()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91CAP9
+#define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#else
+#define cpu_is_at91cap9()	(0)
+#endif
+
+/*
+ * Since this is ARM, we will never run on any AVR32 CPU. But these
+ * definitions may reduce clutter in common drivers.
+ */
+#define cpu_is_at32ap7000()	(0)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
new file mode 100644
index 00000000000..29052ba66ad
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/debug-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1						@ MMU enabled?
+	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
+	beq	1001b
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
+	beq	1001b
+	.endm
+
diff --git a/arch/arm/mach-at91/include/mach/dma.h b/arch/arm/mach-at91/include/mach/dma.h
new file mode 100644
index 00000000000..e4f90c17761
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-at91/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
new file mode 100644
index 00000000000..7ab68f97222
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/entry-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/at91_aic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
+	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
+	.endm
+
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
new file mode 100644
index 00000000000..76d76e2fa69
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -0,0 +1,252 @@
+/*
+ * arch/arm/mach-at91/include/mach/gpio.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <asm/irq.h>
+
+#define PIN_BASE		NR_AIC_IRQS
+
+#define MAX_GPIO_BANKS		5
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+
+/*-------------------------------------------------------------------------*/
+
+/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
+ * eventually be removed (along with this errno.h inclusion), and the
+ * gpio request/free calls should probably be implemented.
+ */
+
+#include <asm/errno.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return at91_get_gpio_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	at91_set_gpio_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
new file mode 100644
index 00000000000..da0b681c652
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-at91/include/mach/hardware.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+#include <mach/at91rm9200.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#include <mach/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <mach/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <mach/at91sam9263.h>
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+#include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9.h>
+#elif defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+
+#ifdef CONFIG_MMU
+/*
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000.  (544Kb)
+ */
+#define AT91_IO_PHYS_BASE	0xFFF78000
+#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+#else
+/*
+ * Identity mapping for the non MMU case.
+ */
+#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
+#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
+#endif
+
+#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+
+ /* Convert a physical IO address to virtual IO address */
+#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+/*
+ * Virtual to Physical Address mapping for IO devices.
+ */
+#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_MAX		SZ_1M
+#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+
+/* Serial ports */
+#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0	0x10000000
+#define AT91_CHIPSELECT_1	0x20000000
+#define AT91_CHIPSELECT_2	0x30000000
+#define AT91_CHIPSELECT_3	0x40000000
+#define AT91_CHIPSELECT_4	0x50000000
+#define AT91_CHIPSELECT_5	0x60000000
+#define AT91_CHIPSELECT_6	0x70000000
+#define AT91_CHIPSELECT_7	0x80000000
+
+/* SDRAM */
+#ifdef CONFIG_DRAM_BASE
+#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
+#else
+#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
+#endif
+
+/* Clocks */
+#define AT91_SLOW_CLOCK		32768		/* slow clock */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
new file mode 100644
index 00000000000..1611bd03f52
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	__raw_writel(value, addr + reg_offset);
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
new file mode 100644
index 00000000000..bda29ccbcd9
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/irqs.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <asm/io.h>
+#include <mach/at91_aic.h>
+
+#define NR_AIC_IRQS 32
+
+
+/*
+ * Acknowledge interrupt with AIC after interrupt has been handled.
+ *   (by kernel/irq.c)
+ */
+#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+
+
+/*
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+ * We make provision for 5 banks of GPIO.
+ */
+#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
+
+/* FIQ is AIC source 0. */
+#define FIQ_START AT91_ID_FIQ
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h
new file mode 100644
index 00000000000..9dd1b8c79b0
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/memory.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+#define PHYS_OFFSET	(AT91_SDRAM_BASE)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
new file mode 100644
index 00000000000..e712658d966
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/system.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/at91_st.h>
+#include <mach/at91_dbgu.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+
+	/*
+	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
+	 * Unlike disabling the processor clock via the PMC (above)
+	 *  this allows the processor to be woken via JTAG.
+	 */
+	cpu_do_idle();
+}
+
+void (*at91_arch_reset)(void);
+
+static inline void arch_reset(char mode)
+{
+	/* call the CPU-specific reset function */
+	if (at91_arch_reset)
+		(at91_arch_reset)();
+}
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
new file mode 100644
index 00000000000..d84c9948bec
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-at91/include/mach/timex.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <mach/hardware.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+
+#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
+
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+
+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
+#define AT91SAM9_MASTER_CLOCK	90000000
+#else
+#define AT91SAM9_MASTER_CLOCK	99300000
+#endif
+
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK	99300000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#if defined(CONFIG_MACH_USB_A9263)
+#define AT91SAM9_MASTER_CLOCK	90000000
+#else
+#define AT91SAM9_MASTER_CLOCK	99959500
+#endif
+
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+
+#define AT91SAM9_MASTER_CLOCK	100000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G20)
+
+#define AT91SAM9_MASTER_CLOCK	132096000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+
+#define AT91CAP9_MASTER_CLOCK	100000000
+#define CLOCK_TICK_RATE		(AT91CAP9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91X40)
+
+#define AT91X40_MASTER_CLOCK	40000000
+#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
new file mode 100644
index 00000000000..0410d548e9b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-at91/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <linux/atmel_serial.h>
+
+#if defined(CONFIG_AT91_EARLY_DBGU)
+#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
+#elif defined(CONFIG_AT91_EARLY_USART0)
+#define UART_OFFSET AT91_USART0
+#elif defined(CONFIG_AT91_EARLY_USART1)
+#define UART_OFFSET AT91_USART1
+#elif defined(CONFIG_AT91_EARLY_USART2)
+#define UART_OFFSET AT91_USART2
+#elif defined(CONFIG_AT91_EARLY_USART3)
+#define UART_OFFSET AT91_USART3
+#elif defined(CONFIG_AT91_EARLY_USART4)
+#define UART_OFFSET AT91_USART4
+#elif defined(CONFIG_AT91_EARLY_USART5)
+#define UART_OFFSET AT91_USART5
+#endif
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+#ifdef UART_OFFSET
+	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+
+	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+		barrier();
+	__raw_writel(c, sys + ATMEL_US_THR);
+#endif
+}
+
+static inline void flush(void)
+{
+#ifdef UART_OFFSET
+	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+
+	/* wait for transmission to complete */
+	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+		barrier();
+#endif
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
new file mode 100644
index 00000000000..8eb459f3f5b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-at91/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 78a5cdb746d..da3494a5342 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -25,9 +25,8 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 #include <asm/setup.h>
 
 #include <asm/mach/arch.h>
@@ -56,19 +55,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
 	unsigned int smr, srctype;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		srctype = AT91_AIC_SRCTYPE_HIGH;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_LOW;
 		else
 			return -EINVAL;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_FALLING;
 		else
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 9cdcda500fe..fec03c59ff9 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -13,9 +13,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/mach-types.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 8ab4feb1ec5..ec2fe4ca1e2 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -23,16 +23,15 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_pmc.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 #ifdef CONFIG_ARCH_AT91RM9200
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -42,7 +41,7 @@
 #define sdram_selfrefresh_disable()	do {} while (0)
 
 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9_ddrsdr.h>
+#include <mach/at91cap9_ddrsdr.h>
 
 static u32 saved_lpr;
 
@@ -59,7 +58,7 @@ static inline void sdram_selfrefresh_enable(void)
 #define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
 
 #else
-#include <asm/arch/at91sam9_sdramc.h>
+#include <mach/at91sam9_sdramc.h>
 
 #ifdef CONFIG_ARCH_AT91SAM9263
 /*
@@ -92,8 +91,8 @@ static inline void sdram_selfrefresh_enable(void)
  */
 #if defined(AT91_SHDWC)
 
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 static void __init show_reset_status(void)
 {
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index c13ca6c56ba..474616dcd7a 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
 #include <asm/setup.h>
@@ -33,7 +33,7 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 831df007f6c..aa02aa5a01f 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index e2b2c5ac8a8..8ada2018497 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -27,7 +27,7 @@
 
 #include <linux/kernel.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 0d52e085125..c58e32ec4c5 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 3792ab4f099..7122b3d2104 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/initrd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
new file mode 100644
index 00000000000..1588a365f61
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -0,0 +1,78 @@
+/*
+ * AUTCPU12 specific defines
+ *
+ * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_AUTCPU12_H
+#define __ASM_ARCH_AUTCPU12_H
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2
+ * (nCS2). This is the mapping for it.
+ */
+#define AUTCPU12_PHYS_CS8900A		CS2_PHYS_BASE		/* physical */
+#define AUTCPU12_VIRT_CS8900A		(0xfe000000)		/* virtual */
+
+/*
+ * The flash bank is wired to chip select 0
+ */
+#define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
+
+/* offset for device specific information structure */
+#define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
+/*
+* Videomemory is the internal SRAM (CS 6)	
+*/
+#define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
+#define AUTCPU12_VIRT_VIDEO		(0xfd000000)
+
+/*
+* All special IO's are tied to CS1
+*/
+#define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
+
+#define AUTCPU12_PHYS_NVRAM            	CS1_PHYS_BASE +0x02000000  /* physical */
+
+#define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
+
+#define AUTCPU12_PHYS_SMC              	CS1_PHYS_BASE +0x06000000  /* physical */
+
+#define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
+
+#define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
+
+#define AUTCPU12_PHYS_IO               	CS1_PHYS_BASE +0x0C000000  /* physical */
+
+#define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
+
+/* 
+* defines for smartmedia card access 
+*/
+#define AUTCPU12_SMC_RDY		(1<<2)
+#define AUTCPU12_SMC_ALE		(1<<3)
+#define AUTCPU12_SMC_CLE  		(1<<4)
+#define AUTCPU12_SMC_PORT_OFFSET	PBDR
+#define AUTCPU12_SMC_SELECT_OFFSET 	0x10
+/*
+* defines for lcd contrast 
+*/
+#define AUTCPU12_DPOT_PORT_OFFSET	PEDR
+#define	AUTCPU12_DPOT_CS		(1<<0)
+#define AUTCPU12_DPOT_CLK    		(1<<1)
+#define	AUTCPU12_DPOT_UD		(1<<2)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
new file mode 100644
index 00000000000..64baf9f8740
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -0,0 +1,46 @@
+/* arch/arm/mach-clps711x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/clps7111.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #CLPS7111_PHYS_BASE
+		movne	\rx, #CLPS7111_VIRT_BASE
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+		add	\rx, \rx, #0x0000	@ UART1
+#else
+		add	\rx, \rx, #0x1000	@ UART2
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0480]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 11		@ UBUSYx
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+		tst	\rx, #0x1000		@ UART2 does not have CTS here
+		bne	1002f
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 8		@ CTS
+		bne	1001b
+1002:
+		.endm
+
diff --git a/arch/arm/mach-clps711x/include/mach/dma.h b/arch/arm/mach-clps711x/include/mach/dma.h
new file mode 100644
index 00000000000..0d620e86953
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..90fa2f70489
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for CLPS711X-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
+#error INTSR stride != INTMR stride
+#endif
+
+		.macro	get_irqnr_and_base, irqnr, stat, base, mask
+		mov	\base, #CLPS7111_BASE
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #4
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+		movs	\stat, \stat, lsr #4
+		bne	1001f
+
+		add	\base, \base, #INTSR2 - INTSR1
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #16
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+
+1001:		tst	\stat, #255
+		addeq	\irqnr, \irqnr, #8
+		moveq	\stat, \stat, lsr #8
+		tst	\stat, #15
+		addeq	\irqnr, \irqnr, #4
+		moveq	\stat, \stat, lsr #4
+		tst	\stat, #3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\stat, \stat, lsr #2
+		tst	\stat, #1
+		addeq	\irqnr, \irqnr, #1
+		moveq	\stat, \stat, lsr #1
+		tst	\stat, #1			@ bit 0 should be set
+		.endm
+
+
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
new file mode 100644
index 00000000000..4c3e101b96c
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -0,0 +1,237 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Prospector P720T.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define CLPS7111_VIRT_BASE	0xff000000
+#define CLPS7111_BASE		CLPS7111_VIRT_BASE
+
+/*
+ * The physical addresses that the external chip select signals map to is
+ * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
+ * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
+ * processors are in use.
+ */
+#ifndef CONFIG_EP72XX_ROM_BOOT
+#define CS0_PHYS_BASE		(0x00000000)
+#define CS1_PHYS_BASE		(0x10000000)
+#define CS2_PHYS_BASE		(0x20000000)
+#define CS3_PHYS_BASE		(0x30000000)
+#define CS4_PHYS_BASE		(0x40000000)
+#define CS5_PHYS_BASE		(0x50000000)
+#define CS6_PHYS_BASE		(0x60000000)
+#define CS7_PHYS_BASE		(0x70000000)
+#else
+#define CS0_PHYS_BASE		(0x70000000)
+#define CS1_PHYS_BASE		(0x60000000)
+#define CS2_PHYS_BASE		(0x50000000)
+#define CS3_PHYS_BASE		(0x40000000)
+#define CS4_PHYS_BASE		(0x30000000)
+#define CS5_PHYS_BASE		(0x20000000)
+#define CS6_PHYS_BASE		(0x10000000)
+#define CS7_PHYS_BASE		(0x00000000)
+#endif
+
+#if defined (CONFIG_ARCH_EP7211)
+
+#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7211_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7211.h>
+
+#elif defined (CONFIG_ARCH_EP7212)
+
+#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7212_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7212.h>
+
+#endif
+
+#define SYSPLD_VIRT_BASE	0xfe000000
+#define SYSPLD_BASE		SYSPLD_VIRT_BASE
+
+#ifndef __ASSEMBLER__
+
+#define PCIO_BASE		IO_BASE
+
+#endif
+
+
+#if  defined (CONFIG_ARCH_AUTCPU12)
+
+#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CS89712_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+#endif
+
+
+#if defined (CONFIG_ARCH_CDB89712)
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+/* dynamic ioremap() areas */
+#define FLASH_START      0x00000000
+#define FLASH_SIZE       0x800000
+#define FLASH_WIDTH      4
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+
+/* static cdb89712_map_io() areas */
+#define REGISTER_START   0x80000000
+#define REGISTER_SIZE    0x4000
+#define REGISTER_BASE    0xff000000
+
+#define ETHER_START      0x20000000
+#define ETHER_SIZE       0x1000
+#define ETHER_BASE       0xfe000000
+
+#endif
+
+
+#if defined (CONFIG_ARCH_EDB7211)
+
+/*
+ * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
+ * and repeat across it. This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
+
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
+ * (nCS2). This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
+#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
+#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
+
+#endif /* CONFIG_ARCH_EDB7211 */
+
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the EDB7211.
+ */
+#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
+#define EDB_PD2_LCDEN		(1<<2)
+#define EDB_PD3_LCDBL		(1<<3)
+
+
+#if defined (CONFIG_ARCH_CEIVA)
+
+#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CEIVA_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
+#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
+
+#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
+#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
+
+#define CEIVA_FLASH_SIZE        0x100000
+#define CEIVA_FLASH_WIDTH       2
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+/*
+ * SED1355 LCD controller
+ */
+#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
+#define CEIVA_VIRT_SED1355	(0xfc000000)
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
+ */
+
+// Reset line to SED1355 (must be high to operate)
+#define CEIVA_PD1_LCDRST	(1<<1)
+// LCD panel enable (set to one, to enable LCD)
+#define CEIVA_PD4_LCDEN		(1<<4)
+// Backlight (set to one, to turn on backlight
+#define CEIVA_PD5_LCDBL		(1<<5)
+
+/*
+ * Relevant bits in port B, which report the status of the buttons.
+ */
+
+// White button
+#define CEIVA_PB4_WHT_BTN	(1<<4)
+// Black button
+#define CEIVA_PB0_BLK_BTN	(1<<0)
+#endif // #if defined (CONFIG_ARCH_CEIVA)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/io.h b/arch/arm/mach-clps711x/include/mach/io.h
new file mode 100644
index 00000000000..4c844008767
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/io.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+/*
+ * We don't support ins[lb]/outs[lb].  Make them fault.
+ */
+#define __raw_readsb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_readsl(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesl(p,d,l)	do { *(int *)0 = 0; } while (0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
new file mode 100644
index 00000000000..30b7e97285a
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/irqs.h
@@ -0,0 +1,53 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/irqs.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Interrupts from INTSR1
+ */
+#define IRQ_CSINT			4
+#define IRQ_EINT1			5
+#define IRQ_EINT2			6
+#define IRQ_EINT3			7
+#define IRQ_TC1OI			8
+#define IRQ_TC2OI			9
+#define IRQ_RTCMI			10
+#define IRQ_TINT			11
+#define IRQ_UTXINT1			12
+#define IRQ_URXINT1			13
+#define IRQ_UMSINT			14
+#define IRQ_SSEOTI			15
+
+#define INT1_IRQS			(0x0000fff0)
+#define INT1_ACK_IRQS			(0x00004f10)
+
+/*
+ * Interrupts from INTSR2
+ */
+#define IRQ_KBDINT			(16+0)	/* bit 0 */
+#define IRQ_SS2RX			(16+1)	/* bit 1 */
+#define IRQ_SS2TX			(16+2)	/* bit 2 */
+#define IRQ_UTXINT2			(16+12)	/* bit 12 */
+#define IRQ_URXINT2			(16+13)	/* bit 13 */
+
+#define INT2_IRQS			(0x30070000)
+#define INT2_ACK_IRQS			(0x00010000)
+
+#define NR_IRQS                         30
+
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
new file mode 100644
index 00000000000..71c2fa70c8e
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -0,0 +1,94 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+
+#if defined(CONFIG_ARCH_CDB89712)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#elif defined (CONFIG_ARCH_AUTCPU12)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#else
+
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
+
+
+/*
+ * Like the SA1100, the EDB7211 has a large gap between physical RAM
+ * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
+ * discontiguous physical memory.  In 2.4, we can use the standard
+ * Linux NUMA support.
+ *
+ * This is not necessary for EP7211 implementations with only one used
+ * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
+ */
+
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1).  However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much more convenient to use Linux's NUMA support to implement
+ * our memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS	24
+
+#endif
+
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
new file mode 100644
index 00000000000..f7f4c120189
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -0,0 +1,121 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/syspld.h
+ *
+ *  System Control PLD register definitions.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSPLD_H
+#define __ASM_ARCH_SYSPLD_H
+
+#define SYSPLD_PHYS_BASE	(0x10000000)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
+#else
+#define SYSPLD_REG(type,off)	(off)
+#endif
+
+#define PLD_INT		SYSPLD_REG(u32, 0x000000)
+#define PLD_INT_PENIRQ		(1 << 5)
+#define PLD_INT_UCB_IRQ		(1 << 1)
+#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
+
+#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
+#define PLD_PWR_EXT		(1 << 5)
+#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
+#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
+#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
+#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
+
+#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
+#define PLD_KBD_WAKE		(1 << 1)
+#define PLD_KBD_EN		(1 << 0)
+
+#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
+#define PLD_SPI_EN		(1 << 0)
+
+#define PLD_IO		SYSPLD_REG(u32, 0x000010)
+#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
+#define PLD_IO_USER		(1 << 5)	/* user defined switch */
+#define PLD_IO_LED3		(1 << 4)
+#define PLD_IO_LED2		(1 << 3)
+#define PLD_IO_LED1		(1 << 2)
+#define PLD_IO_LED0		(1 << 1)
+#define PLD_IO_LEDEN		(1 << 0)
+
+#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
+#define PLD_IRDA_EN		(1 << 0)
+
+#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
+#define PLD_COM2_EN		(1 << 0)
+
+#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
+#define PLD_COM1_EN		(1 << 0)
+
+#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
+#define PLD_AUD_DIV1		(1 << 6)
+#define PLD_AUD_DIV0		(1 << 5)
+#define PLD_AUD_CLK_SEL1	(1 << 4)
+#define PLD_AUD_CLK_SEL0	(1 << 3)
+#define PLD_AUD_MIC_PWR		(1 << 2)
+#define PLD_AUD_MIC_GAIN	(1 << 1)
+#define PLD_AUD_CODEC_EN	(1 << 0)
+
+#define PLD_CF		SYSPLD_REG(u32, 0x000024)
+#define PLD_CF2_SLEEP		(1 << 5)
+#define PLD_CF1_SLEEP		(1 << 4)
+#define PLD_CF2_nPDREQ		(1 << 3)
+#define PLD_CF1_nPDREQ		(1 << 2)
+#define PLD_CF2_nIRQ		(1 << 1)
+#define PLD_CF1_nIRQ		(1 << 0)
+
+#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
+#define PLD_SDC_INT_EN		(1 << 2)
+#define PLD_SDC_WP		(1 << 1)
+#define PLD_SDC_CD		(1 << 0)
+
+#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
+
+#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
+#define PLD_CODEC_IRQ3		(1 << 4)
+#define PLD_CODEC_IRQ2		(1 << 3)
+#define PLD_CODEC_IRQ1		(1 << 2)
+#define PLD_CODEC_EN		(1 << 0)
+
+#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
+#define PLD_BRITE_UP		(1 << 1)
+#define PLD_BRITE_DN		(1 << 0)
+
+#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
+#define PLD_LCDEN_EN		(1 << 0)
+
+#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
+
+#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
+#define PLD_TCH_PENIRQ		(1 << 1)
+#define PLD_TCH_EN		(1 << 0)
+
+#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
+#define PLD_GPIO2		(1 << 2)
+#define PLD_GPIO1		(1 << 1)
+#define PLD_GPIO0		(1 << 0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
new file mode 100644
index 00000000000..a8eade40317
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/system.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov	r0, r0\n\
+	mov	r0, r0");
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
new file mode 100644
index 00000000000..8fe283ccd1f
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/time.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <asm/leds.h>
+#include <asm/hardware/clps7111.h>
+
+extern void clps711x_setup_timer(void);
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+p720t_timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_leds();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	clps711x_setup_timer();
+	timer_irq.handler = p720t_timer_interrupt;
+	setup_irq(IRQ_TC2OI, &timer_irq);
+}
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
new file mode 100644
index 00000000000..ac8823ccff9
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/timex.h
+ *
+ *  Prospector 720T architecture timex specifications
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
new file mode 100644
index 00000000000..7164310dea7
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -0,0 +1,59 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+#undef CLPS7111_BASE
+#define CLPS7111_BASE CLPS7111_PHYS_BASE
+
+#define __raw_readl(p)		(*(unsigned long *)(p))
+#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
+
+#ifdef CONFIG_DEBUG_CLPS711X_UART2
+#define SYSFLGx	SYSFLG2
+#define UARTDRx	UARTDR2
+#else
+#define SYSFLGx	SYSFLG1
+#define UARTDRx	UARTDR1
+#endif
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+		barrier();
+	clps_writel(c, UARTDRx);
+}
+
+static inline void flush(void)
+{
+	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..ea6cc7beff2
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index ca102960f52..38623cfcac5 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -21,7 +21,7 @@
 #include <linux/list.h>
 
 #include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index a00f77ef8df..a7b4591205a 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -25,7 +25,7 @@
 #include <linux/bootmem.h>
 
 #include <asm/sizes.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index 4915b352496..262c3c36145 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index c8ecd2480c2..f51f97d4f21 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index e5dc33f1f95..ef1fcd17189 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -22,7 +22,7 @@
 #include <linux/irq.h>
 #include <linux/sched.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index 2ac63671ea5..cc1b82179e8 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -21,7 +21,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-clps7500/include/mach/acornfb.h b/arch/arm/mach-clps7500/include/mach/acornfb.h
new file mode 100644
index 00000000000..aea6330c974
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/acornfb.h
@@ -0,0 +1,33 @@
+#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119)
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+			  struct fb_var_screeninfo *var)
+{
+	u_int bandwidth;
+  
+	vidc->control |= VIDC20_CTRL_PIX_CK;
+
+	/* Calculate bandwidth */
+	bandwidth = var->pixclock * 8 / var->bits_per_pixel;
+
+	/* Encode bandwidth as VIDC20 setting */
+	if (bandwidth > 16667*2)
+		vidc->control |= VIDC20_CTRL_FIFO_16;
+	else if (bandwidth > 13333*2)
+		vidc->control |= VIDC20_CTRL_FIFO_20;
+	else if (bandwidth > 11111*2)
+		vidc->control |= VIDC20_CTRL_FIFO_24;
+	else
+		vidc->control |= VIDC20_CTRL_FIFO_28;
+
+	vidc->pll_ctl  = 0x2020;
+}
+
+#ifdef CONFIG_CHRONTEL_7003
+#define acornfb_default_control()	VIDC20_CTRL_PIX_HCLK
+#else
+#define acornfb_default_control()	VIDC20_CTRL_PIX_VCLK
+#endif
+
+#define acornfb_default_econtrol()	VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK
diff --git a/arch/arm/mach-clps7500/include/mach/debug-macro.S b/arch/arm/mach-clps7500/include/mach/debug-macro.S
new file mode 100644
index 00000000000..af4104e7e84
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-clps7500/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-clps7500/include/mach/dma.h b/arch/arm/mach-clps7500/include/mach/dma.h
new file mode 100644
index 00000000000..63fcde50549
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/dma.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#define DMA_S0			0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-clps7500/include/mach/entry-macro.S b/arch/arm/mach-clps7500/include/mach/entry-macro.S
new file mode 100644
index 00000000000..4e7e5414409
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h
new file mode 100644
index 00000000000..d66578a3371
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/hardware.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/hardware.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ *
+ * This file contains the hardware definitions of the 
+ * CL7500 evaluation board.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+#include <asm/hardware/iomd.h>
+
+#ifdef __ASSEMBLY__
+#define IOMEM(x) x
+#else
+#define IOMEM(x) ((void __iomem *)(x))
+#endif
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define ISA_START		0x0c000000	/* ISA */
+#define ISA_SIZE		0x00010000
+#define ISA_BASE		0xe1000000
+
+#define FLASH_START		0x01000000	/* XXX */
+#define FLASH_SIZE		0x01000000
+#define FLASH_BASE		0xe2000000
+
+#define LED_START		0x0302B000
+#define LED_SIZE		0x00001000
+#define LED_BASE		0xe3000000
+#define LED_ADDRESS		(LED_BASE + 0xa00)
+
+/* Let's define SCREEN_START for CL7500, even though it's a lie. */
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define VIDC_BASE		(void __iomem *)0xe0400000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+/* in/out bias for the ISA slot region */
+#define ISASLOT_IO		0x80400000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/io.h b/arch/arm/mach-clps7500/include/mach/io.h
new file mode 100644
index 00000000000..2ff2860889e
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/io.h
@@ -0,0 +1,255 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port << 2));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port << 2));			\
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)								\
+	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)			__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
new file mode 100644
index 00000000000..e8da3c58df7
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irq.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irq.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
+ *
+ * Changelog:
+ *   10-10-1996	RMK	Brought up to date with arch-sa110eval
+ *   22-08-1998	RMK	Restructured IRQ routines
+ *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
+ */
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline int fixup_irq(unsigned int irq)
+{
+	if (irq == IRQ_ISA) {
+		int isabits = *((volatile unsigned int *)0xe002b700);
+		if (isabits == 0) {
+			printk("Spurious ISA IRQ!\n");
+			return irq;
+		}
+		irq = IRQ_ISA_BASE;
+		while (!(isabits & 1)) {
+			irq++;
+			isabits >>= 1;
+		}
+	}
+
+	return irq;
+}
diff --git a/arch/arm/mach-clps7500/include/mach/irqs.h b/arch/arm/mach-clps7500/include/mach/irqs.h
new file mode 100644
index 00000000000..bee66b487f5
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irqs.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irqs.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+#define IRQ_INT2		0
+#define IRQ_INT1		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_FORCE		7
+#define IRQ_INT8		8
+#define IRQ_ISA			9
+#define IRQ_INT6		10
+#define IRQ_INT5		11
+#define IRQ_INT4		12
+#define IRQ_INT3		13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define IRQ_IOP0		24
+#define IRQ_IOP1		25
+#define IRQ_IOP2		26
+#define IRQ_IOP3		27
+#define IRQ_IOP4		28
+#define IRQ_IOP5		29
+#define IRQ_IOP6		30
+#define IRQ_IOP7		31
+
+#define IRQ_MOUSERX		40
+#define IRQ_MOUSETX		41
+#define IRQ_ADC			42
+#define IRQ_EVENT1		43
+#define IRQ_EVENT2		44
+
+#define IRQ_ISA_BASE		48
+#define IRQ_ISA_3		48
+#define IRQ_ISA_4		49
+#define IRQ_ISA_5		50
+#define IRQ_ISA_7		51
+#define IRQ_ISA_9		52
+#define IRQ_ISA_10		53
+#define IRQ_ISA_11		54
+#define IRQ_ISA_14		55	
+
+#define FIQ_INT9		0
+#define FIQ_INT5		1
+#define FIQ_INT6		4
+#define FIQ_INT8		6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
new file mode 100644
index 00000000000..3326aa99d3e
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/memory.h
+ *
+ * Copyright (c) 1996,1997,1998 Russell King.
+ *
+ * Changelog:
+ *  20-Oct-1996	RMK	Created
+ *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
+ *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
+ *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
+ *  21-Mar-1999	RMK	Renamed to memory.h
+ *		RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
new file mode 100644
index 00000000000..624fc2830ae
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/system.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nexus Electronics Ltd.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	iomd_writeb(0, IOMD_SUSMODE);
+}
+
+#define arch_reset(mode)			\
+	do {					\
+		iomd_writeb(0, IOMD_ROMCR0);	\
+		cpu_reset(0);			\
+	} while (0)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/timex.h b/arch/arm/mach-clps7500/include/mach/timex.h
new file mode 100644
index 00000000000..dfaa9b42575
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/timex.h
+ *
+ * CL7500 architecture timex specifications
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+/*
+ * On the ARM7500, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/arch/arm/mach-clps7500/include/mach/uncompress.h b/arch/arm/mach-clps7500/include/mach/uncompress.h
new file mode 100644
index 00000000000..d7d0af4b49f
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
+ */
+#define BASE 0x03010000
+#define SERBASE (BASE + (0x2f8 << 2))
+
+static inline void putc(char c)
+{
+	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
+		barrier();
+
+	*((volatile unsigned int *)(SERBASE)) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	int baud = 3686400 / (9600 * 32);
+
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
+	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
+	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
+	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps7500/include/mach/vmalloc.h b/arch/arm/mach-clps7500/include/mach/vmalloc.h
new file mode 100644
index 00000000000..8fc5406d1b6
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 9e4024c4965..13435578781 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -20,13 +20,13 @@
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /* other misc. init functions */
 void __init davinci_psc_init(void);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index c6b94f60e0b..d46c69b55aa 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,10 +17,10 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/psc.h>
+#include <mach/psc.h>
 #include "clock.h"
 
 /* PLL/Reset register offsets */
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 9c67886e718..c9cb4f09b18 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
new file mode 100644
index 00000000000..38bdd49bc18
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-davinci/include/mach/clock.h
+ *
+ * Clock control driver for DaVinci - header file
+ *
+ * Authors: Vladimir Barinov <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
+#define __ASM_ARCH_DAVINCI_CLOCK_H
+
+struct clk;
+
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern int davinci_clk_init(void);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
new file mode 100644
index 00000000000..a97dfbb15e5
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -0,0 +1,19 @@
+/*
+ * Header for code common to all DaVinci machines.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
+#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
+
+struct sys_timer;
+
+extern struct sys_timer davinci_timer;
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
new file mode 100644
index 00000000000..e6c0f0d5d06
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/*
+ * Debugging macro for DaVinci
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+		.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x01000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00c20000   @ UART 0
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-davinci/include/mach/dma.h b/arch/arm/mach-davinci/include/mach/dma.h
new file mode 100644
index 00000000000..8e2f2d0ba66
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dma.h
@@ -0,0 +1,16 @@
+/*
+ * DaVinci DMA definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS			0xffffffff
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
new file mode 100644
index 00000000000..039b84f933b
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Low-level IRQ helper macros for TI DaVinci-based platforms
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr \tmp, [\base, #0x14]
+		mov \tmp, \tmp, lsr #2
+		sub \irqnr, \tmp, #1
+		cmp \tmp, #0
+		.endm
+
+		.macro	irq_prio_table
+		.endm
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
new file mode 100644
index 00000000000..ec151ccf1e8
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -0,0 +1,159 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__DAVINCI_GPIO_H
+#define	__DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
+ * for later updates, code should write GPIO(N) or:
+ *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
+ *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
+ *
+ * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
+ * for now, that's != GPIO(N)
+ */
+#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
+#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
+#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
+
+struct gpio_controller {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct gpio_controller *__iomem
+__gpio_to_controller(unsigned gpio)
+{
+	void *__iomem ptr;
+
+	if (gpio < 32)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+	else if (gpio < 64)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+	else if (gpio < DAVINCI_N_GPIO)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+	else
+		ptr = NULL;
+	return ptr;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+/* The get/set/clear functions will inline when called with constant
+ * parameters, for low-overhead bitbanging.  Illegal constant parameters
+ * cause link-time errors.
+ *
+ * Otherwise, calls with variable parameters use outlined functions.
+ */
+extern int __error_inval_gpio(void);
+
+extern void __gpio_set(unsigned gpio, int value);
+extern int __gpio_get(unsigned gpio);
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(value)) {
+		struct gpio_controller	*__iomem g;
+		u32			mask;
+
+		if (gpio >= DAVINCI_N_GPIO)
+			__error_inval_gpio();
+
+		g = __gpio_to_controller(gpio);
+		mask = __gpio_mask(gpio);
+		if (value)
+			__raw_writel(mask, &g->set_data);
+		else
+			__raw_writel(mask, &g->clr_data);
+		return;
+	}
+
+	__gpio_set(gpio, value);
+}
+
+/* Returns zero or nonzero; works for gpios configured as inputs OR
+ * as outputs.
+ *
+ * NOTE: changes in reported values are synchronized to the GPIO clock.
+ * This is most easily seen after calling gpio_set_value() and then immediatly
+ * gpio_get_value(), where the gpio_get_value() would return the old value
+ * until the GPIO clock ticks and the new value gets latched.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	struct gpio_controller *__iomem g;
+
+	if (!__builtin_constant_p(gpio))
+		return __gpio_get(gpio);
+
+	if (gpio >= DAVINCI_N_GPIO)
+		return __error_inval_gpio();
+
+	g = __gpio_to_controller(gpio);
+	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+}
+
+/* powerup default direction is IN */
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h>	/* cansleep wrappers */
+
+extern int gpio_request(unsigned gpio, const char *tag);
+extern void gpio_free(unsigned gpio);
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return DAVINCI_N_AINTC_IRQ + gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - DAVINCI_N_AINTC_IRQ;
+}
+
+#endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
new file mode 100644
index 00000000000..a2e8969afac
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -0,0 +1,52 @@
+/*
+ * Common hardware definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Base register addresses
+ */
+#define DAVINCI_DMA_3PCC_BASE			(0x01C00000)
+#define DAVINCI_DMA_3PTC0_BASE			(0x01C10000)
+#define DAVINCI_DMA_3PTC1_BASE			(0x01C10400)
+#define DAVINCI_I2C_BASE			(0x01C21000)
+#define DAVINCI_PWM0_BASE			(0x01C22000)
+#define DAVINCI_PWM1_BASE			(0x01C22400)
+#define DAVINCI_PWM2_BASE			(0x01C22800)
+#define DAVINCI_SYSTEM_MODULE_BASE		(0x01C40000)
+#define DAVINCI_PLL_CNTRL0_BASE			(0x01C40800)
+#define DAVINCI_PLL_CNTRL1_BASE			(0x01C40C00)
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE		(0x01C41000)
+#define DAVINCI_SYSTEM_DFT_BASE			(0x01C42000)
+#define DAVINCI_IEEE1394_BASE			(0x01C60000)
+#define DAVINCI_USB_OTG_BASE			(0x01C64000)
+#define DAVINCI_CFC_ATA_BASE			(0x01C66000)
+#define DAVINCI_SPI_BASE			(0x01C66800)
+#define DAVINCI_GPIO_BASE			(0x01C67000)
+#define DAVINCI_UHPI_BASE			(0x01C67800)
+#define DAVINCI_VPSS_REGS_BASE			(0x01C70000)
+#define DAVINCI_EMAC_CNTRL_REGS_BASE		(0x01C80000)
+#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE	(0x01C81000)
+#define DAVINCI_EMAC_WRAPPER_RAM_BASE		(0x01C82000)
+#define DAVINCI_MDIO_CNTRL_REGS_BASE		(0x01C84000)
+#define DAVINCI_IMCOP_BASE			(0x01CC0000)
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE		(0x01E00000)
+#define DAVINCI_VLYNQ_BASE			(0x01E01000)
+#define DAVINCI_MCBSP_BASE			(0x01E02000)
+#define DAVINCI_MMC_SD_BASE			(0x01E10000)
+#define DAVINCI_MS_BASE				(0x01E20000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	(0x02000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE	(0x04000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE	(0x06000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE	(0x08000000)
+#define DAVINCI_VLYNQ_REMOTE_BASE		(0x0C000000)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
new file mode 100644
index 00000000000..e2f54168abd
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -0,0 +1,21 @@
+/*
+ * DaVinci I2C controller platfrom_device info
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+*/
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+/* All frequencies are expressed in kHz */
+struct davinci_i2c_platform_data {
+	unsigned int	bus_freq;	/* standard bus frequency */
+	unsigned int	bus_delay;	/* transaction delay */
+};
+
+#endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
new file mode 100644
index 00000000000..e7accb91086
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -0,0 +1,79 @@
+/*
+ * DaVinci IO address definitions
+ *
+ * Copied from include/asm/arm/arch-omap/io.h
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+#define IO_PHYS		0x01c00000
+#define IO_OFFSET	0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE		0x00400000
+#define IO_VIRT		(IO_PHYS + IO_OFFSET)
+#define io_p2v(pa)	((pa) + IO_OFFSET)
+#define io_v2p(va)	((va) - IO_OFFSET)
+#define IO_ADDRESS(x)	io_p2v(x)
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define PCIO_BASE               0
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the DaVinci IO region
+ *
+ * NOTE: - Use davinci_read/write[bwl] for physical register addresses
+ *	 - Use __raw_read/write[bwl]() for virtual register addresses
+ *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ *	 - DO NOT use hardcoded virtual addresses to allow changing the
+ *	   IO address space again if needed
+ */
+#define davinci_readb(a)	(*(volatile unsigned char  *)IO_ADDRESS(a))
+#define davinci_readw(a)	(*(volatile unsigned short *)IO_ADDRESS(a))
+#define davinci_readl(a)	(*(volatile unsigned int   *)IO_ADDRESS(a))
+
+#define davinci_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
+#define davinci_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define davinci_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+
+/* 16 bit uses LDRH/STRH, base +/- offset_8 */
+typedef struct { volatile u16 offset[256]; } __regbase16;
+#define __REGV16(vaddr)		((__regbase16 *)((vaddr)&~0xff)) \
+					->offset[((vaddr)&0xff)>>1]
+#define __REG16(paddr)          __REGV16(io_p2v(paddr))
+
+/* 8/32 bit uses LDR/STR, base +/- offset_12 */
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+#define __REGV8(vaddr)		((__regbase8  *)((vaddr)&~4095)) \
+					->offset[((vaddr)&4095)>>0]
+#define __REG8(paddr)		__REGV8(io_p2v(paddr))
+
+typedef struct { volatile u32 offset[4096]; } __regbase32;
+#define __REGV32(vaddr)		((__regbase32 *)((vaddr)&~4095)) \
+					->offset[((vaddr)&4095)>>2]
+
+#define __REG(paddr)		__REGV32(io_p2v(paddr))
+#else
+
+#define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
+
+#endif /* __ASSEMBLER__ */
+#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
new file mode 100644
index 00000000000..f4c5ca6da9f
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -0,0 +1,105 @@
+/*
+ * DaVinci interrupt controller definitions
+ *
+ *  Copyright (C) 2006 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* Base address */
+#define DAVINCI_ARM_INTC_BASE 0x01C48000
+
+/* Interrupt lines */
+#define IRQ_VDINT0       0
+#define IRQ_VDINT1       1
+#define IRQ_VDINT2       2
+#define IRQ_HISTINT      3
+#define IRQ_H3AINT       4
+#define IRQ_PRVUINT      5
+#define IRQ_RSZINT       6
+#define IRQ_VFOCINT      7
+#define IRQ_VENCINT      8
+#define IRQ_ASQINT       9
+#define IRQ_IMXINT       10
+#define IRQ_VLCDINT      11
+#define IRQ_USBINT       12
+#define IRQ_EMACINT      13
+
+#define IRQ_CCINT0       16
+#define IRQ_CCERRINT     17
+#define IRQ_TCERRINT0    18
+#define IRQ_TCERRINT     19
+#define IRQ_PSCIN        20
+
+#define IRQ_IDE          22
+#define IRQ_HPIINT       23
+#define IRQ_MBXINT       24
+#define IRQ_MBRINT       25
+#define IRQ_MMCINT       26
+#define IRQ_SDIOINT      27
+#define IRQ_MSINT        28
+#define IRQ_DDRINT       29
+#define IRQ_AEMIFINT     30
+#define IRQ_VLQINT       31
+#define IRQ_TINT0_TINT12 32
+#define IRQ_TINT0_TINT34 33
+#define IRQ_TINT1_TINT12 34
+#define IRQ_TINT1_TINT34 35
+#define IRQ_PWMINT0      36
+#define IRQ_PWMINT1      37
+#define IRQ_PWMINT2      38
+#define IRQ_I2C          39
+#define IRQ_UARTINT0     40
+#define IRQ_UARTINT1     41
+#define IRQ_UARTINT2     42
+#define IRQ_SPINT0       43
+#define IRQ_SPINT1       44
+
+#define IRQ_DSP2ARM0     46
+#define IRQ_DSP2ARM1     47
+#define IRQ_GPIO0        48
+#define IRQ_GPIO1        49
+#define IRQ_GPIO2        50
+#define IRQ_GPIO3        51
+#define IRQ_GPIO4        52
+#define IRQ_GPIO5        53
+#define IRQ_GPIO6        54
+#define IRQ_GPIO7        55
+#define IRQ_GPIOBNK0     56
+#define IRQ_GPIOBNK1     57
+#define IRQ_GPIOBNK2     58
+#define IRQ_GPIOBNK3     59
+#define IRQ_GPIOBNK4     60
+#define IRQ_COMMTX       61
+#define IRQ_COMMRX       62
+#define IRQ_EMUINT       63
+
+#define DAVINCI_N_AINTC_IRQ	64
+#define DAVINCI_N_GPIO		71
+
+#define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
+
+#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
new file mode 100644
index 00000000000..dd1625c23cf
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -0,0 +1,64 @@
+/*
+ * DaVinci memory space definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+#include <asm/page.h>
+#include <asm/sizes.h>
+
+/**************************************************************************
+ * Definitions
+ **************************************************************************/
+#define DAVINCI_DDR_BASE    0x80000000
+#define DAVINCI_IRAM_BASE   0x00008000 /* ARM Internal RAM */
+
+#define PHYS_OFFSET DAVINCI_DDR_BASE
+
+/*
+ * Increase size of DMA-consistent memory region
+ */
+#define CONSISTENT_DMA_SIZE (14<<20)
+
+#ifndef __ASSEMBLY__
+/*
+ * Restrict DMA-able region to workaround silicon bug.  The bug
+ * restricts buffers available for DMA to video hardware to be
+ * below 128M
+ */
+static inline void
+__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+	unsigned int sz = (128<<20) >> PAGE_SHIFT;
+
+	if (node != 0)
+		sz = 0;
+
+	size[1] = size[0] - sz;
+	size[0] = sz;
+}
+
+#define arch_adjust_zones(node, zone_size, holes) \
+        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
+
+#endif
+
+/*
+ * Bus address is physical address
+ */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
new file mode 100644
index 00000000000..c24b6782804
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -0,0 +1,55 @@
+/*
+ * DaVinci pin multiplexing defines
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define DAVINCI_MUX_AEAW0	0
+#define DAVINCI_MUX_AEAW1	1
+#define DAVINCI_MUX_AEAW2	2
+#define DAVINCI_MUX_AEAW3	3
+#define DAVINCI_MUX_AEAW4	4
+#define DAVINCI_MUX_AECS4	10
+#define DAVINCI_MUX_AECS5	11
+#define DAVINCI_MUX_VLYNQWD0	12
+#define DAVINCI_MUX_VLYNQWD1	13
+#define DAVINCI_MUX_VLSCREN	14
+#define DAVINCI_MUX_VLYNQEN	15
+#define DAVINCI_MUX_HDIREN	16
+#define DAVINCI_MUX_ATAEN	17
+#define DAVINCI_MUX_RGB666	22
+#define DAVINCI_MUX_RGB888	23
+#define DAVINCI_MUX_LOEEN	24
+#define DAVINCI_MUX_LFLDEN	25
+#define DAVINCI_MUX_CWEN	26
+#define DAVINCI_MUX_CFLDEN	27
+#define DAVINCI_MUX_HPIEN	29
+#define DAVINCI_MUX_1394EN	30
+#define DAVINCI_MUX_EMACEN	31
+
+#define DAVINCI_MUX_LEVEL2	32
+#define DAVINCI_MUX_UART0	(DAVINCI_MUX_LEVEL2 + 0)
+#define DAVINCI_MUX_UART1	(DAVINCI_MUX_LEVEL2 + 1)
+#define DAVINCI_MUX_UART2	(DAVINCI_MUX_LEVEL2 + 2)
+#define DAVINCI_MUX_U2FLO	(DAVINCI_MUX_LEVEL2 + 3)
+#define DAVINCI_MUX_PWM0	(DAVINCI_MUX_LEVEL2 + 4)
+#define DAVINCI_MUX_PWM1	(DAVINCI_MUX_LEVEL2 + 5)
+#define DAVINCI_MUX_PWM2	(DAVINCI_MUX_LEVEL2 + 6)
+#define DAVINCI_MUX_I2C		(DAVINCI_MUX_LEVEL2 + 7)
+#define DAVINCI_MUX_SPI		(DAVINCI_MUX_LEVEL2 + 8)
+#define DAVINCI_MUX_MSTK	(DAVINCI_MUX_LEVEL2 + 9)
+#define DAVINCI_MUX_ASP		(DAVINCI_MUX_LEVEL2 + 10)
+#define DAVINCI_MUX_CLK0	(DAVINCI_MUX_LEVEL2 + 16)
+#define DAVINCI_MUX_CLK1	(DAVINCI_MUX_LEVEL2 + 17)
+#define DAVINCI_MUX_TIMIN	(DAVINCI_MUX_LEVEL2 + 18)
+
+extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
+
+#endif /* __ASM_ARCH_MUX_H */
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
new file mode 100644
index 00000000000..4977aa071e1
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -0,0 +1,76 @@
+/*
+ *  DaVinci Power & Sleep Controller (PSC) defines
+ *
+ *  Copyright (C) 2006 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_PSC_H
+#define __ASM_ARCH_PSC_H
+
+/* Power and Sleep Controller (PSC) Domains */
+#define DAVINCI_GPSC_ARMDOMAIN      0
+#define DAVINCI_GPSC_DSPDOMAIN      1
+
+#define DAVINCI_LPSC_VPSSMSTR       0
+#define DAVINCI_LPSC_VPSSSLV        1
+#define DAVINCI_LPSC_TPCC           2
+#define DAVINCI_LPSC_TPTC0          3
+#define DAVINCI_LPSC_TPTC1          4
+#define DAVINCI_LPSC_EMAC           5
+#define DAVINCI_LPSC_EMAC_WRAPPER   6
+#define DAVINCI_LPSC_MDIO           7
+#define DAVINCI_LPSC_IEEE1394       8
+#define DAVINCI_LPSC_USB            9
+#define DAVINCI_LPSC_ATA            10
+#define DAVINCI_LPSC_VLYNQ          11
+#define DAVINCI_LPSC_UHPI           12
+#define DAVINCI_LPSC_DDR_EMIF       13
+#define DAVINCI_LPSC_AEMIF          14
+#define DAVINCI_LPSC_MMC_SD         15
+#define DAVINCI_LPSC_MEMSTICK       16
+#define DAVINCI_LPSC_McBSP          17
+#define DAVINCI_LPSC_I2C            18
+#define DAVINCI_LPSC_UART0          19
+#define DAVINCI_LPSC_UART1          20
+#define DAVINCI_LPSC_UART2          21
+#define DAVINCI_LPSC_SPI            22
+#define DAVINCI_LPSC_PWM0           23
+#define DAVINCI_LPSC_PWM1           24
+#define DAVINCI_LPSC_PWM2           25
+#define DAVINCI_LPSC_GPIO           26
+#define DAVINCI_LPSC_TIMER0         27
+#define DAVINCI_LPSC_TIMER1         28
+#define DAVINCI_LPSC_TIMER2         29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS  30
+#define DAVINCI_LPSC_ARM            31
+#define DAVINCI_LPSC_SCR2           32
+#define DAVINCI_LPSC_SCR3           33
+#define DAVINCI_LPSC_SCR4           34
+#define DAVINCI_LPSC_CROSSBAR       35
+#define DAVINCI_LPSC_CFG27          36
+#define DAVINCI_LPSC_CFG3           37
+#define DAVINCI_LPSC_CFG5           38
+#define DAVINCI_LPSC_GEM            39
+#define DAVINCI_LPSC_IMCOP          40
+
+#endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
new file mode 100644
index 00000000000..fb8cb229bfd
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci serial device definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <mach/io.h>
+
+#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
+
+#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
new file mode 100644
index 00000000000..84ff77aeb73
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * DaVinci system defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+extern void davinci_watchdog_reset(void);
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode)
+{
+	davinci_watchdog_reset();
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
new file mode 100644
index 00000000000..52827567841
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ * DaVinci timer defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* The source frequency for the timers is the 27MHz clock */
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
new file mode 100644
index 00000000000..8c165def37b
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * Serial port stubs for kernel decompress status messages
+ *
+ *  Author:     Anant Gole
+ * (C) Copyright (C) 2006, Texas Instruments, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+/* PORT_16C550A, in polled non-fifo mode */
+
+static void putc(char c)
+{
+	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+
+	while (!(uart[UART_LSR] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	while (!(uart[UART_LSR] & UART_LSR_THRE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
new file mode 100644
index 00000000000..b98bd9e92fd
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * DaVinci vmalloc definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/memory.h>
+#include <mach/io.h>
+
+/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
+#define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 47787ff84a6..5bb66b61c1a 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -17,7 +17,7 @@
 #include <asm/memory.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 extern void davinci_check_revision(void);
 
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 1333d84d2e4..12ca9f29f84 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -23,7 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 92d26bd305b..8ff9d8aca60 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -11,9 +11,9 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 /* System control register offsets */
 #define PINMUX0         0x00
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1334416559a..aa2fc375a32 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,9 +23,9 @@
 #include <linux/init.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/psc.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
 
 /* PSC register offsets */
 #define EPCPR		0x070
@@ -70,9 +70,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
 
-	if (id < 0)
-		return;
-
 	mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
 	if (enable)
 		mdctl |= 0x00000003;	/* Enable Module */
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 8368c93c788..caf101e2cc6 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -29,9 +29,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/serial.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/serial.h>
+#include <mach/irqs.h>
 
 #define UART_DAVINCI_PWREMU 0x0c
 
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index e96a3dcdc1a..206e80d4171 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -17,13 +17,13 @@
 #include <linux/spinlock.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/errno.h>
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 static struct clock_event_device clockevent_davinci;
 
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 7710e14b526..65cc7c27191 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -15,7 +15,7 @@
 #include <linux/serial_8250.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
new file mode 100644
index 00000000000..1dde8227f3a
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-ebsa110/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+**/
+
+		.macro	addruart,rx
+		mov	\rx, #0xf0000000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ebsa110/include/mach/dma.h b/arch/arm/mach-ebsa110/include/mach/dma.h
new file mode 100644
index 00000000000..780a04c8bbe
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/dma.h
@@ -0,0 +1,11 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 DMA definitions
+ */
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
new file mode 100644
index 00000000000..cc3e5992f6b
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for ebsa110 platform.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+
+
+#define IRQ_STAT		0xff000000	/* read */
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #IRQ_STAT
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
+	ldrb	\stat, [\base]			@ get interrupts
+	mov	\irqnr, #0
+	tst	\stat, #15
+	addeq	\irqnr, \irqnr, #4
+	moveq	\stat, \stat, lsr #4
+	tst	\stat, #3
+	addeq	\irqnr, \irqnr, #2
+	moveq	\stat, \stat, lsr #2
+	tst	\stat, #1
+	addeq	\irqnr, \irqnr, #1
+	moveq	\stat, \stat, lsr #1
+	tst	\stat, #1			@ bit 0 should be set
+	.endm
+
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
new file mode 100644
index 00000000000..4b2fb774390
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the EBSA-110.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
+ * f0000e60 - f0000e64	398 - 399
+ * f0000de0 - f0000dfc	378 - 37f  lp0
+ * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f00014f1             a79        pnp write data
+ * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
+ * f00004f1		279        pnp address
+ * f0000440 - f000046c  220 - 236  eth0
+ * f0000405		203        pnp read data
+ */
+
+#define ISAMEM_PHYS		0xe0000000
+#define ISAMEM_SIZE		0x10000000
+
+#define ISAIO_PHYS		0xf0000000
+#define ISAIO_SIZE		PGDIR_SIZE
+
+#define TRICK0_PHYS		0xf2000000
+#define TRICK1_PHYS		0xf2400000
+#define TRICK2_PHYS		0xf2800000
+#define TRICK3_PHYS		0xf2c00000
+#define TRICK4_PHYS		0xf3000000
+#define TRICK5_PHYS		0xf3400000
+#define TRICK6_PHYS		0xf3800000
+#define TRICK7_PHYS		0xf3c00000
+
+#define ISAMEM_BASE		0xe0000000
+#define ISAIO_BASE		0xf0000000
+
+#define PIT_BASE		0xfc000000
+#define SOFT_BASE		0xfd000000
+
+/*
+ * RAM definitions
+ */
+#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
+
+#endif
+
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
new file mode 100644
index 00000000000..f68daa632af
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/io.h
@@ -0,0 +1,92 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/io.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+u8 __inb8(unsigned int port);
+void __outb8(u8  val, unsigned int port);
+
+u8 __inb16(unsigned int port);
+void __outb16(u8  val, unsigned int port);
+
+u16 __inw(unsigned int port);
+void __outw(u16 val, unsigned int port);
+
+u32 __inl(unsigned int port);
+void __outl(u32 val, unsigned int port);
+
+u8  __readb(const volatile void __iomem *addr);
+u16 __readw(const volatile void __iomem *addr);
+u32 __readl(const volatile void __iomem *addr);
+
+void __writeb(u8  val, void __iomem *addr);
+void __writew(u16 val, void __iomem *addr);
+void __writel(u32 val, void __iomem *addr);
+
+/*
+ * Argh, someone forgot the IOCS16 line.  We therefore have to handle
+ * the byte stearing by selecting the correct byte IO functions here.
+ */
+#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
+#define inb(p) 			__inb16(p)
+#define outb(v,p)		__outb16(v,p)
+#else
+#define inb(p)			__inb8(p)
+#define outb(v,p)		__outb8(v,p)
+#endif
+
+#define inw(p)			__inw(p)
+#define outw(v,p)		__outw(v,p)
+
+#define inl(p)			__inl(p)
+#define outl(v,p)		__outl(v,p)
+
+#define readb(b)		__readb(b)
+#define readw(b)		__readw(b)
+#define readl(b)		__readl(b)
+#define readb_relaxed(addr)	readb(addr)
+#define readw_relaxed(addr)	readw(addr)
+#define readl_relaxed(addr)	readl(addr)
+
+#define writeb(v,b)		__writeb(v,b)
+#define writew(v,b)		__writew(v,b)
+#define writel(v,b)		__writel(v,b)
+
+static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
+					   unsigned int flags)
+{
+	return (void __iomem *)cookie;
+}
+
+#define __arch_ioremap		__arch_ioremap
+#define __arch_iounmap(cookie)	do { } while (0)
+
+extern void insb(unsigned int port, void *buf, int sz);
+extern void insw(unsigned int port, void *buf, int sz);
+extern void insl(unsigned int port, void *buf, int sz);
+
+extern void outsb(unsigned int port, const void *buf, int sz);
+extern void outsw(unsigned int port, const void *buf, int sz);
+extern void outsl(unsigned int port, const void *buf, int sz);
+
+/* can't support writesb atm */
+extern void writesw(void __iomem *addr, const void *data, int wordlen);
+extern void writesl(void __iomem *addr, const void *data, int longlen);
+
+/* can't support readsb atm */
+extern void readsw(const void __iomem *addr, void *data, int wordlen);
+extern void readsl(const void __iomem *addr, void *data, int longlen);
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
new file mode 100644
index 00000000000..a8f3771bc06
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define NR_IRQS			8
+
+#define IRQ_EBSA110_PRINTER	0
+#define IRQ_EBSA110_COM1	1
+#define IRQ_EBSA110_COM2	2
+#define IRQ_EBSA110_ETHERNET	3
+#define IRQ_EBSA110_TIMER0	4
+#define IRQ_EBSA110_TIMER1	5
+#define IRQ_EBSA110_PCMCIA	6
+#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
new file mode 100644
index 00000000000..eea4b75b657
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * We keep this 1:1 so that we don't interfere
+ * with the PCMCIA memory regions
+ */
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+/*
+ * Cache flushing area - SRAM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
new file mode 100644
index 00000000000..350a028997e
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/system.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static inline void arch_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
+#define arch_reset(mode)	cpu_reset(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
new file mode 100644
index 00000000000..4fb43b22a10
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 architecture timex specifications
+ */
+
+/*
+ * On the EBSA, the clock ticks at weird rates.
+ * This is therefore not used to calculate the
+ * divisor.
+ */
+#define CLOCK_TICK_RATE		47894000
+
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
new file mode 100644
index 00000000000..32041509fbf
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+
+#define SERIAL_BASE	((unsigned char *)0xf0000be0)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned char v, *base = SERIAL_BASE;
+
+	do {
+		v = base[UART_LSR << 2];
+		barrier();
+	} while (!(v & UART_LSR_THRE));
+
+	base[UART_TX << 2] = c;
+}
+
+static inline void flush(void)
+{
+	unsigned char v, *base = SERIAL_BASE;
+
+	do {
+		v = base[UART_LSR << 2];
+		barrier();
+	} while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
+		 (UART_LSR_TEMT|UART_LSR_THRE));
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
new file mode 100644
index 00000000000..9b44c19e95e
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index 6b2380e153e..53748f5462e 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,7 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 3bc8c5e708e..6a6ea57c2a4 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index ac5d5818eb7..aa1fb352fb8 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index f62c35500bb..6062e47f204 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 struct clk {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1d7bca6aa44..f99f4366939 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,7 +36,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -46,7 +46,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
@@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 		ep93xx_gpio_update_int_params(port);
 	}
@@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 
 	gpio_int_unmasked[port] &= ~port_mask;
@@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	gpio_direction_input(gpio);
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		gpio_int_type1[port] |= port_mask;
 		/* set initial polarity based on current input level */
 		if (gpio_get_value(gpio))
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index 0315615b74d..97550c0ad7b 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 62e064bab1d..99b01d44bf1 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index d6a5698da91..9fb72d01a36 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index e310e4d7299..87267a574f5 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 249ca9e57bc..7e373950be4 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 7ca0e6170a4..08a7c9bfb68 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 694590a451c..9b41ec1f089 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index dc2e4c00d98..0f3fb87ca4b 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..802858bc809
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/debug-macro.S
+ * Debugging macro include header
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
+		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
+		orr	\rx, \rx, #0x000c0000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 00000000000..d0fa9656e92
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..96b85e2c2c0
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/entry-macro.S
+ * IRQ demultiplexing for EP93xx
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
+		orr	\base, \base, #0x000b0000
+		mov	\irqnr, #0
+		ldr	\irqstat, [\base]		@ lower 32 interrupts
+		cmp	\irqstat, #0
+		bne	1001f
+
+		eor	\base, \base, #0x00070000
+		ldr	\irqstat, [\base]		@ upper 32 interrupts
+		cmp	\irqstat, #0
+		beq	1002f
+		mov	\irqnr, #0x20
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:
+		.endm
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
new file mode 100644
index 00000000000..9f4458c8e07
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_REGS_H
+#define __ASM_ARCH_EP93XX_REGS_H
+
+/*
+ * EP93xx linux memory map:
+ *
+ * virt		phys		size
+ * fe800000			5M		per-platform mappings
+ * fed00000	80800000	2M		APB
+ * fef00000	80000000	1M		AHB
+ */
+
+#define EP93XX_AHB_PHYS_BASE		0x80000000
+#define EP93XX_AHB_VIRT_BASE		0xfef00000
+#define EP93XX_AHB_SIZE			0x00100000
+
+#define EP93XX_APB_PHYS_BASE		0x80800000
+#define EP93XX_APB_VIRT_BASE		0xfed00000
+#define EP93XX_APB_SIZE			0x00200000
+
+
+/* AHB peripherals */
+#define EP93XX_DMA_BASE			(EP93XX_AHB_VIRT_BASE + 0x00000000)
+
+#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+
+#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+
+#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
+
+#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
+
+#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
+
+#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
+
+
+/* APB peripherals */
+#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
+
+#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
+#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
+#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
+#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
+#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
+#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
+#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
+#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
+#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
+#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
+#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
+#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
+#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
+#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
+#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+
+#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+
+#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+
+#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+
+#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
+
+#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
+
+#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
+
+#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
+
+#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
+#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
+#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
+#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
+#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
+#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
+#define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
+#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
+
+#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
new file mode 100644
index 00000000000..21fe2b922aa
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
new file mode 100644
index 00000000000..f7020414c5d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gpio.h
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/* GPIO port A.  */
+#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
+
+/* GPIO port B.  */
+#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
+
+/* GPIO port C.  */
+#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
+#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
+
+/* GPIO port D.  */
+#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
+#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
+
+/* GPIO port E.  */
+#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
+
+/* GPIO port F.  */
+#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
+#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
+
+/* GPIO port G.  */
+#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
+
+/* GPIO port H.  */
+#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
+#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+/*
+ * Map GPIO A0..A7  (0..7)  to irq 64..71,
+ *          B0..B7  (7..15) to irq 72..79, and
+ *          F0..F7 (16..24) to irq 80..87.
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
+		return 64 + gpio;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - gpio_to_irq(0);
+}
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
new file mode 100644
index 00000000000..529807d182b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/hardware.h
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "ep93xx-regs.h"
+
+#define pcibios_assign_all_busses()	0
+
+#include "platform.h"
+
+#include "gesbc9312.h"
+#include "ts72xx.h"
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
new file mode 100644
index 00000000000..1ab9a90ad33
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/io.h
+ */
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(p)			((void __iomem *)(p))
+#define __mem_pci(p)		(p)
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h
new file mode 100644
index 00000000000..ff98390bbf0
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/irqs.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/irqs.h
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_COMMRX		2
+#define IRQ_EP93XX_COMMTX		3
+#define IRQ_EP93XX_TIMER1		4
+#define IRQ_EP93XX_TIMER2		5
+#define IRQ_EP93XX_AACINTR		6
+#define IRQ_EP93XX_DMAM2P0		7
+#define IRQ_EP93XX_DMAM2P1		8
+#define IRQ_EP93XX_DMAM2P2		9
+#define IRQ_EP93XX_DMAM2P3		10
+#define IRQ_EP93XX_DMAM2P4		11
+#define IRQ_EP93XX_DMAM2P5		12
+#define IRQ_EP93XX_DMAM2P6		13
+#define IRQ_EP93XX_DMAM2P7		14
+#define IRQ_EP93XX_DMAM2P8		15
+#define IRQ_EP93XX_DMAM2P9		16
+#define IRQ_EP93XX_DMAM2M0		17
+#define IRQ_EP93XX_DMAM2M1		18
+#define IRQ_EP93XX_GPIO0MUX		19
+#define IRQ_EP93XX_GPIO1MUX		20
+#define IRQ_EP93XX_GPIO2MUX		21
+#define IRQ_EP93XX_GPIO3MUX		22
+#define IRQ_EP93XX_UART1RX		23
+#define IRQ_EP93XX_UART1TX		24
+#define IRQ_EP93XX_UART2RX		25
+#define IRQ_EP93XX_UART2TX		26
+#define IRQ_EP93XX_UART3RX		27
+#define IRQ_EP93XX_UART3TX		28
+#define IRQ_EP93XX_KEY			29
+#define IRQ_EP93XX_TOUCH		30
+#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
+
+#define IRQ_EP93XX_EXT0			32
+#define IRQ_EP93XX_EXT1			33
+#define IRQ_EP93XX_EXT2			34
+#define IRQ_EP93XX_64HZ			35
+#define IRQ_EP93XX_WATCHDOG		36
+#define IRQ_EP93XX_RTC			37
+#define IRQ_EP93XX_IRDA			38
+#define IRQ_EP93XX_ETHERNET		39
+#define IRQ_EP93XX_EXT3			40
+#define IRQ_EP93XX_PROG			41
+#define IRQ_EP93XX_1HZ			42
+#define IRQ_EP93XX_VSYNC		43
+#define IRQ_EP93XX_VIDEO_FIFO		44
+#define IRQ_EP93XX_SSP1RX		45
+#define IRQ_EP93XX_SSP1TX		46
+#define IRQ_EP93XX_GPIO4MUX		47
+#define IRQ_EP93XX_GPIO5MUX		48
+#define IRQ_EP93XX_GPIO6MUX		49
+#define IRQ_EP93XX_GPIO7MUX		50
+#define IRQ_EP93XX_TIMER3		51
+#define IRQ_EP93XX_UART1		52
+#define IRQ_EP93XX_SSP			53
+#define IRQ_EP93XX_UART2		54
+#define IRQ_EP93XX_UART3		55
+#define IRQ_EP93XX_USB			56
+#define IRQ_EP93XX_ETHERNET_PME		57
+#define IRQ_EP93XX_DSP			58
+#define IRQ_EP93XX_GPIO_AB		59
+#define IRQ_EP93XX_SAI			60
+#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
+
+#define NR_EP93XX_IRQS			(64 + 24)
+
+#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS		32
+
+#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
new file mode 100644
index 00000000000..f1b63359075
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __bus_to_virt(x)	__phys_to_virt(x)
+#define __virt_to_bus(x)	__virt_to_phys(x)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
new file mode 100644
index 00000000000..b5c182473f5
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/platform.h
+ */
+
+#ifndef __ASSEMBLY__
+
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
+
+struct ep93xx_eth_data
+{
+	unsigned char	dev_addr[6];
+	unsigned char	phy_id;
+};
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
new file mode 100644
index 00000000000..67789d0f329
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/system.h
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	u32 devicecfg;
+
+	local_irq_disable();
+
+	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
new file mode 100644
index 00000000000..6b3503b01fa
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/timex.h
+ */
+
+#define CLOCK_TICK_RATE		983040
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
new file mode 100644
index 00000000000..30b318aa1a1
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ts72xx.h
+ */
+
+/*
+ * TS72xx memory map:
+ *
+ * virt		phys		size
+ * febff000	22000000	4K	model number register
+ * febfe000	22400000	4K	options register
+ * febfd000	22800000	4K	options register #2
+ * febfc000	[67]0000000	4K	NAND data register
+ * febfb000	[67]0400000	4K	NAND control register
+ * febfa000	[67]0800000	4K	NAND busy register
+ * febf9000	10800000	4K	TS-5620 RTC index register
+ * febf8000	11700000	4K	TS-5620 RTC data register
+ */
+
+#define TS72XX_MODEL_PHYS_BASE		0x22000000
+#define TS72XX_MODEL_VIRT_BASE		0xfebff000
+#define TS72XX_MODEL_SIZE		0x00001000
+
+#define TS72XX_MODEL_TS7200		0x00
+#define TS72XX_MODEL_TS7250		0x01
+#define TS72XX_MODEL_TS7260		0x02
+
+
+#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
+#define TS72XX_OPTIONS_VIRT_BASE	0xfebfe000
+#define TS72XX_OPTIONS_SIZE		0x00001000
+
+#define TS72XX_OPTIONS_COM2_RS485	0x02
+#define TS72XX_OPTIONS_MAX197		0x01
+
+
+#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
+#define TS72XX_OPTIONS2_VIRT_BASE	0xfebfd000
+#define TS72XX_OPTIONS2_SIZE		0x00001000
+
+#define TS72XX_OPTIONS2_TS9420		0x04
+#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
+
+
+#define TS72XX_NOR_PHYS_BASE		0x60000000
+#define TS72XX_NOR2_PHYS_BASE		0x62000000
+
+#define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
+#define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
+#define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
+#define TS72XX_NAND_DATA_SIZE		0x00001000
+
+#define TS72XX_NAND1_CONTROL_PHYS_BASE	0x60400000
+#define TS72XX_NAND2_CONTROL_PHYS_BASE	0x70400000
+#define TS72XX_NAND_CONTROL_VIRT_BASE	0xfebfb000
+#define TS72XX_NAND_CONTROL_SIZE	0x00001000
+
+#define TS72XX_NAND1_BUSY_PHYS_BASE	0x60800000
+#define TS72XX_NAND2_BUSY_PHYS_BASE	0x70800000
+#define TS72XX_NAND_BUSY_VIRT_BASE	0xfebfa000
+#define TS72XX_NAND_BUSY_SIZE		0x00001000
+
+
+#define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
+#define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
+#define TS72XX_RTC_INDEX_SIZE		0x00001000
+
+#define TS72XX_RTC_DATA_VIRT_BASE	0xfebf8000
+#define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
+#define TS72XX_RTC_DATA_SIZE		0x00001000
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+static inline int board_is_ts7200(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+}
+
+static inline int board_is_ts7250(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+}
+
+static inline int board_is_ts7260(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+}
+
+static inline int is_max197_installed(void)
+{
+	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+					TS72XX_OPTIONS_MAX197);
+}
+
+static inline int is_ts9420_installed(void)
+{
+	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+					TS72XX_OPTIONS2_TS9420);
+}
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
new file mode 100644
index 00000000000..1fd2f17de32
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <mach/ep93xx-regs.h>
+
+static unsigned char __raw_readb(unsigned int ptr)
+{
+	return *((volatile unsigned char *)ptr);
+}
+
+static unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+
+#define PHYS_UART1_DATA		0x808c0000
+#define PHYS_UART1_FLAG		0x808c0018
+#define UART1_FLAG_TXFF		0x20
+
+static inline void putc(int c)
+{
+	int i;
+
+	for (i = 0; i < 1000; i++) {
+		/* Transmit fifo not full?  */
+		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+			break;
+	}
+
+	__raw_writeb(c, PHYS_UART1_DATA);
+}
+
+static inline void flush(void)
+{
+}
+
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static void ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+
+static void arch_decomp_setup(void)
+{
+	ethernet_reset();
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..aed21cd3fe2
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f28c1294cae..de047a5c811 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 3a4bf90ba83..c3cbff126d0 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -20,7 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/m48t86.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index 35eb232a649..ae3e1c8c758 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -18,6 +18,9 @@ static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
 static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
+	if (dev->irq >= 255)
+		return -1;	/* not a valid interrupt. */
+
 	if (dev->irq >= 128)
 		return dev->irq & 0x1f;
 
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index 09c1fbc5187..4e10090cd87 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
new file mode 100644
index 00000000000..4329b812357
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -0,0 +1,57 @@
+/* arch/arm/mach-footbridge/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/dec21285.h>
+
+#ifndef CONFIG_DEBUG_DC21285_PORT
+	/* For NetWinder debugging */
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x7c000000	@ physical
+		movne	\rx, #0xff000000	@ virtual
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+#define UART_SHIFT	0
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
+
+#else
+	/* For EBSA285 debugging */
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x42000000
+		movne	\rx, #dc21285_high
+		.if	dc21285_low
+		orrne	\rx, \rx, #dc21285_low
+		.endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x160]	@ UARTDR
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
+		tst	\rd, #1 << 3
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/dma.h b/arch/arm/mach-footbridge/include/mach/dma.h
new file mode 100644
index 00000000000..62afd213eff
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/dma.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/dma.h
+ *
+ *  Architecture DMA routines
+ *
+ *  Copyright (C) 1998,1999 Russell King
+ *  Copyright (C) 1998,1999 Philip Blundell
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * The 21285 has two internal DMA channels; we call these 8 and 9.
+ * On CATS hardware we have an additional eight ISA dma channels
+ * numbered 0..7.
+ */
+#define _ISA_DMA(x)		(0+(x))
+#define _DC21285_DMA(x)		(8+(x))
+
+#define MAX_DMA_CHANNELS	10
+
+#define DMA_FLOPPY		_ISA_DMA(2)
+#define DMA_ISA_CASCADE		_ISA_DMA(4)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
new file mode 100644
index 00000000000..d3847be0c66
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for footbridge-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #dc21285_high
+		.if	dc21285_low
+		orr	\base, \base, #dc21285_low
+		.endif
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #0x180]	@ get interrupts
+
+		mov	\irqnr, #IRQ_SDRAMPARITY
+		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_RX
+		movne	\irqnr, #IRQ_CONRX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA1
+		movne	\irqnr, #IRQ_DMA1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA2
+		movne	\irqnr, #IRQ_DMA2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN0
+		movne	\irqnr, #IRQ_IN0
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN1
+		movne	\irqnr, #IRQ_IN1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN2
+		movne	\irqnr, #IRQ_IN2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN3
+		movne	\irqnr, #IRQ_IN3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI
+		movne	\irqnr, #IRQ_PCI
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
+		movne	\irqnr, #IRQ_DOORBELLHOST
+		bne     1001f
+
+		tst	\irqstat, #IRQ_MASK_I2OINPOST
+		movne	\irqnr, #IRQ_I2OINPOST
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER1
+		movne	\irqnr, #IRQ_TIMER1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER2
+		movne	\irqnr, #IRQ_TIMER2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER3
+		movne	\irqnr, #IRQ_TIMER3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_TX
+		movne	\irqnr, #IRQ_CONTX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_ABORT
+		movne	\irqnr, #IRQ_PCI_ABORT
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_SERR
+		movne	\irqnr, #IRQ_PCI_SERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
+		movne	\irqnr, #IRQ_DISCARD_TIMER
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_DPERR
+		movne	\irqnr, #IRQ_PCI_DPERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_PERR
+		movne	\irqnr, #IRQ_PCI_PERR
+1001:
+		.endm
+
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
new file mode 100644
index 00000000000..ffaea90486f
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -0,0 +1,105 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/hardware.h
+ *
+ *  Copyright (C) 1998-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the EBSA-285.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+/*   Virtual      Physical	Size
+ * 0xff800000	0x40000000	1MB	X-Bus
+ * 0xff000000	0x7c000000	1MB	PCI I/O space
+ * 0xfe000000	0x42000000	1MB	CSR
+ * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
+ * 0xfc000000	0x79000000	1MB	PCI IACK/special space
+ * 0xfb000000	0x7a000000	16MB	PCI Config type 1
+ * 0xfa000000	0x7b000000	16MB	PCI Config type 0
+ * 0xf9000000	0x50000000	1MB	Cache flush
+ * 0xf0000000	0x80000000	16MB	ISA memory
+ */
+#define XBUS_SIZE		0x00100000
+#define XBUS_BASE		0xff800000
+
+#define PCIO_SIZE		0x00100000
+#define PCIO_BASE		0xff000000
+
+#define ARMCSR_SIZE		0x00100000
+#define ARMCSR_BASE		0xfe000000
+
+#define WFLUSH_SIZE		0x00100000
+#define WFLUSH_BASE		0xfd000000
+
+#define PCIIACK_SIZE		0x00100000
+#define PCIIACK_BASE		0xfc000000
+
+#define PCICFG1_SIZE		0x01000000
+#define PCICFG1_BASE		0xfb000000
+
+#define PCICFG0_SIZE		0x01000000
+#define PCICFG0_BASE		0xfa000000
+
+#define PCIMEM_SIZE		0x01000000
+#define PCIMEM_BASE		0xf0000000
+
+#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_LED_AMBER		(1 << 0)
+#define XBUS_LED_GREEN		(1 << 1)
+#define XBUS_LED_RED		(1 << 2)
+#define XBUS_LED_TOGGLE		(1 << 8)
+
+#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
+#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
+#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
+#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
+
+#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
+
+
+/* PIC irq control */
+#define PIC_LO			0x20
+#define PIC_MASK_LO		0x21
+#define PIC_HI			0xA0
+#define PIC_MASK_HI		0xA1
+
+/* GPIO pins */
+#define GPIO_CCLK		0x800
+#define GPIO_DSCLK		0x400
+#define GPIO_E2CLK		0x200
+#define GPIO_IOLOAD		0x100
+#define GPIO_RED_LED		0x080
+#define GPIO_WDTIMER		0x040
+#define GPIO_DATA		0x020
+#define GPIO_IOCLK		0x010
+#define GPIO_DONE		0x008
+#define GPIO_FAN		0x004
+#define GPIO_GREEN_LED		0x002
+#define GPIO_RESET		0x001
+
+/* CPLD pins */
+#define CPLD_DS_ENABLE		8
+#define CPLD_7111_DISABLE	4
+#define CPLD_UNMUTE		2
+#define CPLD_FLASH_WR_ENABLE	1
+
+#ifndef __ASSEMBLY__
+extern void gpio_modify_op(int mask, int set);
+extern void gpio_modify_io(int mask, int in);
+extern int  gpio_read(void);
+extern void cpld_modify(int mask, int set);
+#endif
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM 	0x81000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
new file mode 100644
index 00000000000..a7b06623999
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/io.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Modifications:
+ *   06-12-1997	RMK	Created.
+ *   07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * Translation of various region addresses to virtual addresses
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#if 1
+#define __mem_pci(a)		(a)
+#else
+
+static inline void __iomem *___mem_pci(void __iomem *p)
+{
+	unsigned long a = (unsigned long)p;
+	BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
+	return p;
+}
+
+#define __mem_pci(a)		___mem_pci(a)
+#endif
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h
new file mode 100644
index 00000000000..400551e43e4
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/irqs.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/irqs.h
+ *
+ * Copyright (C) 1998 Russell King
+ * Copyright (C) 1998 Phil Blundell
+ *
+ * Changelog:
+ *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
+ *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
+ */
+#include <asm/mach-types.h>
+
+#define NR_IRQS			36
+#define NR_DC21285_IRQS		16
+
+#define _ISA_IRQ(x)		(0 + (x))
+#define _ISA_INR(x)		((x) - 0)
+#define _DC21285_IRQ(x)		(16 + (x))
+#define _DC21285_INR(x)		((x) - 16)
+
+/*
+ * This is a list of all interrupts that the 21285
+ * can generate and we handle.
+ */
+#define IRQ_CONRX		_DC21285_IRQ(0)
+#define IRQ_CONTX		_DC21285_IRQ(1)
+#define IRQ_TIMER1		_DC21285_IRQ(2)
+#define IRQ_TIMER2		_DC21285_IRQ(3)
+#define IRQ_TIMER3		_DC21285_IRQ(4)
+#define IRQ_IN0			_DC21285_IRQ(5)
+#define IRQ_IN1			_DC21285_IRQ(6)
+#define IRQ_IN2			_DC21285_IRQ(7)
+#define IRQ_IN3			_DC21285_IRQ(8)
+#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
+#define IRQ_DMA1		_DC21285_IRQ(10)
+#define IRQ_DMA2		_DC21285_IRQ(11)
+#define IRQ_PCI			_DC21285_IRQ(12)
+#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
+#define IRQ_I2OINPOST		_DC21285_IRQ(14)
+#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
+#define IRQ_PCI_SERR		_DC21285_IRQ(16)
+#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
+#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
+#define IRQ_PCI_PERR		_DC21285_IRQ(19)
+
+#define IRQ_ISA_TIMER		_ISA_IRQ(0)
+#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
+#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
+#define IRQ_ISA_UART2		_ISA_IRQ(3)
+#define IRQ_ISA_UART		_ISA_IRQ(4)
+#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
+#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
+#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
+#define IRQ_ISA_2		_ISA_IRQ(9)
+#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
+#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
+#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
+
+#define IRQ_MASK_UART_RX	(1 << 2)
+#define IRQ_MASK_UART_TX	(1 << 3)
+#define IRQ_MASK_TIMER1		(1 << 4)
+#define IRQ_MASK_TIMER2		(1 << 5)
+#define IRQ_MASK_TIMER3		(1 << 6)
+#define IRQ_MASK_IN0		(1 << 8)
+#define IRQ_MASK_IN1		(1 << 9)
+#define IRQ_MASK_IN2		(1 << 10)
+#define IRQ_MASK_IN3		(1 << 11)
+#define IRQ_MASK_DOORBELLHOST	(1 << 15)
+#define IRQ_MASK_DMA1		(1 << 16)
+#define IRQ_MASK_DMA2		(1 << 17)
+#define IRQ_MASK_PCI		(1 << 18)
+#define IRQ_MASK_SDRAMPARITY	(1 << 24)
+#define IRQ_MASK_I2OINPOST	(1 << 25)
+#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
+#define IRQ_MASK_PCI_SERR	(1 << 23)
+#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
+#define IRQ_MASK_PCI_DPERR	(1 << 28)
+#define IRQ_MASK_PCI_PERR	(1 << 31)
+
+/*
+ * Netwinder interrupt allocations
+ */
+#define IRQ_NETWINDER_ETHER10	IRQ_IN0
+#define IRQ_NETWINDER_ETHER100	IRQ_IN1
+#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
+#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
+#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
+#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
+#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
+#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
+
+#undef RTC_IRQ
+#define RTC_IRQ		IRQ_ISA_RTC_ALARM
+#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
+#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
+#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
+
+#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
new file mode 100644
index 00000000000..e9cae99dd1f
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -0,0 +1,67 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
+ *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
+ *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
+ *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
+ *			Renamed to memory.h
+ *			Moved PAGE_OFFSET and TASK_SIZE here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#if defined(CONFIG_FOOTBRIDGE_ADDIN)
+/*
+ * If we may be using add-in footbridge mode, then we must
+ * use the out-of-line translation that makes use of the
+ * PCI BAR
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long __virt_to_bus(unsigned long);
+extern unsigned long __bus_to_virt(unsigned long);
+#endif
+
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+
+#define __virt_to_bus(x)	((x) - 0xe0000000)
+#define __bus_to_virt(x)	((x) + 0xe0000000)
+
+#else
+
+#error "Undefined footbridge mode"
+
+#endif
+
+/* Task size and page offset at 3GB */
+#define TASK_SIZE		UL(0xbf000000)
+#define PAGE_OFFSET		UL(0xc0000000)
+
+/*
+ * Cache flushing area.
+ */
+#define FLUSH_BASE		0xf9000000
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#define FLUSH_BASE_PHYS		0x50000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
new file mode 100644
index 00000000000..01c9f407f49
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -0,0 +1,69 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/dec21285.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/*
+		 * Jump into the ROM
+		 */
+		cpu_reset(0x41000000);
+	} else {
+		if (machine_is_netwinder()) {
+			/* open up the SuperIO chip
+			 */
+			outb(0x87, 0x370);
+			outb(0x87, 0x370);
+
+			/* aux function group 1 (logical device 7)
+			 */
+			outb(0x07, 0x370);
+			outb(0x07, 0x371);
+
+			/* set GP16 for WD-TIMER output
+			 */
+			outb(0xe6, 0x370);
+			outb(0x00, 0x371);
+
+			/* set a RED LED and toggle WD_TIMER for rebooting
+			 */
+			outb(0xc4, 0x338);
+		} else {
+			/* 
+			 * Force the watchdog to do a CPU reset.
+			 *
+			 * After making sure that the watchdog is disabled
+			 * (so we can change the timer registers) we first
+			 * enable the timer to autoreload itself.  Next, the
+			 * timer interval is set really short and any
+			 * current interrupt request is cleared (so we can
+			 * see an edge transition).  Finally, TIMER4 is
+			 * enabled as the watchdog.
+			 */
+			*CSR_SA110_CNTL &= ~(1 << 13);
+			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+					   TIMER_CNTL_AUTORELOAD |
+					   TIMER_CNTL_DIV16;
+			*CSR_TIMER4_LOAD = 0x2;
+			*CSR_TIMER4_CLR  = 0;
+			*CSR_SA110_CNTL |= (1 << 13);
+		}
+	}
+}
diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
new file mode 100644
index 00000000000..d0fea9d6d4a
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/timex.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA285 architecture timex specifications
+ */
+
+/*
+ * We assume a constant here; this satisfies the maths in linux/timex.h
+ * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
+ * this must be a constant.
+ */
+#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
new file mode 100644
index 00000000000..5dfa4428734
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/mach-types.h>
+
+/*
+ * Note! This could cause problems on the NetWinder
+ */
+#define DC21285_BASE ((volatile unsigned int *)0x42000160)
+#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
+
+static inline void putc(char c)
+{
+	if (machine_is_netwinder()) {
+		while ((SER0_BASE[5] & 0x60) != 0x60)
+			barrier();
+		SER0_BASE[0] = c;
+	} else {
+		while (DC21285_BASE[6] & 8);
+		DC21285_BASE[0] = c;
+	}
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
new file mode 100644
index 00000000000..d0958d860a3
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 79443ffc891..7132e522c36 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -21,7 +21,7 @@
 
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/dec21285.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
index 8e9cac5a213..d91a4f4a32d 100644
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ b/arch/arm/mach-footbridge/netwinder-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index d5cfcda385d..004819ea85c 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/time.h
+ *  arch/arm/mach-footbridge/include/mach/time.h
  *
  *  Copyright (C) 1998 Russell King.
  *  Copyright (C) 1998 Phil Blundell
@@ -23,7 +23,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/bcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach/time.h>
@@ -49,12 +49,12 @@ static unsigned long __init get_isa_cmos_time(void)
 	} while (sec != CMOS_READ(RTC_SECONDS));
 
 	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 	if ((year += 1900) < 1970)
 		year += 100;
@@ -76,7 +76,7 @@ static int set_isa_cmos_time(void)
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
+		cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -92,8 +92,8 @@ static int set_isa_cmos_time(void)
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
 		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
 		}
 		CMOS_WRITE(real_seconds,RTC_SECONDS);
 		CMOS_WRITE(real_minutes,RTC_MINUTES);
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 45144ad2bed..b5f9741ae13 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -23,11 +23,11 @@
 #include <asm/pgtable.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/dma.h>
 
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index c2a431f482f..24df2a349a9 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include "common.h"
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index c627fa124eb..53e1f62f2e7 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <linux/device.h>
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 407cd4c0aa8..78be457dc32 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index bf2acdce62e..56161d55cf4 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 static struct resource cirrus_resources[] = {
diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h
new file mode 100644
index 00000000000..079b279e124
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/boards.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-h720x/include/mach/boards.h
+ *
+ * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the board specific defines for various devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
+#error Do not include this file directly. Include asm/hardware.h instead !
+#endif
+
+/* Hynix H7202 developer board specific device defines */
+#ifdef CONFIG_ARCH_H7202
+
+/* FLASH */
+#define FLASH_VIRT		0xd0000000
+#define FLASH_PHYS		0x00000000
+#define FLASH_SIZE		0x02000000
+
+/* onboard LAN controller */
+# define ETH0_PHYS		0x08000000
+
+/* Touch screen defines */
+/* GPIO Port */
+#define PEN_GPIO		GPIO_B_VIRT
+/* Bitmask for pen down interrupt */
+#define PEN_INT_BIT		(1<<7)
+/* Bitmask for pen up interrupt */
+#define PEN_ENA_BIT		(1<<6)
+/* pen up interrupt */
+#define IRQ_PEN			IRQ_MUX_GPIOB(7)
+
+#endif
+
+/* Hynix H7201 developer board specific device defines */
+#if defined (CONFIG_ARCH_H7201)
+/* ROM DISK SPACE */
+#define ROM_DISK_BASE           0xc1800000
+#define ROM_DISK_START          0x41800000
+#define ROM_DISK_SIZE           0x00700000
+
+/* SRAM DISK SPACE */
+#define SRAM_DISK_BASE          0xf1000000
+#define SRAM_DISK_START         0x04000000
+#define SRAM_DISK_SIZE          0x00400000
+#endif
+
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
new file mode 100644
index 00000000000..6294a1344dd
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-h720x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ    io_virt, IO_BASE
+		.equ    io_phys, IO_START
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1  	       @ MMU enabled?
+		moveq   \rx, #io_phys	       @ physical base address
+		movne   \rx, #io_virt	       @ virtual address
+		add     \rx, \rx, #0x00020000   @ UART1
+		.endm
+
+		.macro  senduart,rd,rx
+		str     \rd, [\rx, #0x0]        @ UARTDR
+
+		.endm
+
+		.macro  waituart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
+		bne     1001b
+		.endm
+
+		.macro  busyuart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
+		bne     1001b
+		.endm
diff --git a/arch/arm/mach-h720x/include/mach/dma.h b/arch/arm/mach-h720x/include/mach/dma.h
new file mode 100644
index 00000000000..0a9d86ee84f
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-h720x/include/mach/dma.h
+ *
+ * Architecture DMA routes
+ *
+ * Copyright (C) 1997.1998 Russell King
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#if defined (CONFIG_CPU_H7201)
+#define MAX_DMA_CHANNELS	3
+#elif defined (CONFIG_CPU_H7202)
+#define MAX_DMA_CHANNELS	4
+#else
+#error processor definition missmatch
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..6d3b917c4a1
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-h720x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hynix HMS720x based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
+		@ we could use the id register on H7202, but this is not
+		@ properly updated when we come back from asm_do_irq
+		@ without a previous return from interrupt
+		@ (see loops below in irq_svc, irq_usr)
+		@ We see unmasked pending ints only, as the masked pending ints
+		@ are not visible here
+
+		mov     \base, #0xf0000000	       @ base register
+		orr     \base, \base, #0x24000	       @ irqbase
+		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
+#if defined (CONFIG_CPU_H7201)
+		ldr	\tmp, =0x001fffff
+#else
+		mvn     \tmp, #0xc0000000
+#endif
+		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
+		mov     \irqnr, #0
+
+		mov     \tmp, #0xff00
+		orr     \tmp, \tmp, #0xff
+		tst     \irqstat, \tmp
+		addeq   \irqnr, \irqnr, #16
+		moveq   \irqstat, \irqstat, lsr #16
+		tst     \irqstat, #255
+		addeq   \irqnr, \irqnr, #8
+		moveq   \irqstat, \irqstat, lsr #8
+		tst     \irqstat, #15
+		addeq   \irqnr, \irqnr, #4
+		moveq   \irqstat, \irqstat, lsr #4
+		tst     \irqstat, #3
+		addeq   \irqnr, \irqnr, #2
+		moveq   \irqstat, \irqstat, lsr #2
+		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tst     \irqstat, #1		       @ bit 0 should be set
+		.endm
+
+		.macro  irq_prio_table
+		.endm
+
+#else
+#error hynix processor selection missmatch
+#endif
+
diff --git a/arch/arm/mach-h720x/include/mach/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h
new file mode 100644
index 00000000000..611b4947ccf
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/h7201-regs.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-h720x/include/mach/h7201-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
+#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
+
+/*
+ * PCMCIA
+ */
+#define PCMCIA0_ATT_BASE        0xe5000000
+#define PCMCIA0_ATT_SIZE        0x00200000
+#define PCMCIA0_ATT_START       0x20000000
+#define PCMCIA0_MEM_BASE        0xe5200000
+#define PCMCIA0_MEM_SIZE        0x00200000
+#define PCMCIA0_MEM_START       0x24000000
+#define PCMCIA0_IO_BASE         0xe5400000
+#define PCMCIA0_IO_SIZE         0x00200000
+#define PCMCIA0_IO_START        0x28000000
+
+#define PCMCIA1_ATT_BASE        0xe5600000
+#define PCMCIA1_ATT_SIZE        0x00200000
+#define PCMCIA1_ATT_START       0x30000000
+#define PCMCIA1_MEM_BASE        0xe5800000
+#define PCMCIA1_MEM_SIZE        0x00200000
+#define PCMCIA1_MEM_START       0x34000000
+#define PCMCIA1_IO_BASE         0xe5a00000
+#define PCMCIA1_IO_SIZE         0x00200000
+#define PCMCIA1_IO_START        0x38000000
+
+#define PRIME3C_BASE            0xf0050000
+#define PRIME3C_SIZE            0x00001000
+#define PRIME3C_START           0x10000000
+
+/* VGA Controller */
+#define VGA_RAMBASE 		0x50
+#define VGA_TIMING0 		0x60
+#define VGA_TIMING1 		0x64
+#define VGA_TIMING2 		0x68
+#define VGA_TIMING3 		0x6c
+
+#define LCD_CTRL_VGA_ENABLE   	0x00000100
+#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
+#define LCD_CTRL_VGA_4BPP    	0x00000000
+#define LCD_CTRL_VGA_8BPP    	0x00000200
+#define LCD_CTRL_VGA_16BPP   	0x00000300
+#define LCD_CTRL_SHARE_DMA    	0x00000800
+#define LCD_CTRL_VDE          	0x00100000
+#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
+#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
+
+#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)
diff --git a/arch/arm/mach-h720x/include/mach/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h
new file mode 100644
index 00000000000..17c12eb3499
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/h7202-regs.h
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-h720x/include/mach/h7202-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_OFS		0x2d000
+#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
+#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
+#define SERIAL3_OFS		0x2e000
+#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
+#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
+
+/* Matrix Keyboard Controller */
+#define KBD_VIRT		(IO_VIRT + 0x22000)
+#define KBD_KBCR		0x00
+#define KBD_KBSC		0x04
+#define KBD_KBTR		0x08
+#define KBD_KBVR0		0x0C
+#define KBD_KBVR1		0x10
+#define KBD_KBSR		0x18
+
+#define KBD_KBCR_SCANENABLE	(1 << 7)
+#define KBD_KBCR_NPOWERDOWN	(1 << 2)
+#define KBD_KBCR_CLKSEL_MASK	(3)
+#define KBD_KBCR_CLKSEL_PCLK2	0x0
+#define KBD_KBCR_CLKSEL_PCLK128	0x1
+#define KBD_KBCR_CLKSEL_PCLK256	0x2
+#define KBD_KBCR_CLKSEL_PCLK512	0x3
+
+#define KBD_KBSR_INTR		(1 << 0)
+#define KBD_KBSR_WAKEUP		(1 << 1)
+
+/* USB device controller */
+
+#define USBD_BASE		(IO_VIRT + 0x12000)
+#define USBD_LENGTH		0x3C
+
+#define USBD_GCTRL		0x00
+#define USBD_EPCTRL		0x04
+#define USBD_INTMASK		0x08
+#define USBD_INTSTAT		0x0C
+#define USBD_PWR		0x10
+#define USBD_DMARXTX		0x14
+#define USBD_DEVID		0x18
+#define USBD_DEVCLASS		0x1C
+#define USBD_INTCLASS		0x20
+#define USBD_SETUP0		0x24
+#define USBD_SETUP1		0x28
+#define USBD_ENDP0RD		0x2C
+#define USBD_ENDP0WT		0x30
+#define USBD_ENDP1RD		0x34
+#define USBD_ENDP2WT		0x38
+
+/* PS/2 port */
+#define PSDATA 0x00
+#define PSSTAT 0x04
+#define PSSTAT_TXEMPTY (1<<0)
+#define PSSTAT_TXBUSY (1<<1)
+#define PSSTAT_RXFULL (1<<2)
+#define PSSTAT_RXBUSY (1<<3)
+#define PSSTAT_CLKIN (1<<4)
+#define PSSTAT_DATAIN (1<<5)
+#define PSSTAT_PARITY (1<<6)
+
+#define PSCONF 0x08
+#define PSCONF_ENABLE (1<<0)
+#define PSCONF_TXINTEN (1<<2)
+#define PSCONF_RXINTEN (1<<3)
+#define PSCONF_FORCECLKLOW (1<<4)
+#define PSCONF_FORCEDATLOW (1<<5)
+#define PSCONF_LCE (1<<6)
+
+#define PSINTR 0x0C
+#define PSINTR_TXINT (1<<0)
+#define PSINTR_RXINT (1<<1)
+#define PSINTR_PAR (1<<2)
+#define PSINTR_RXTO (1<<3)
+#define PSINTR_TXTO (1<<4)
+
+#define PSTDLO 0x10 /* clk low before start transmission */
+#define PSTPRI 0x14 /* PRI clock */
+#define PSTXMT 0x18 /* maximum transmission time */
+#define PSTREC 0x20 /* maximum receive time */
+#define PSPWDN 0x3c
+
+/* ADC converter */
+#define ADC_BASE 		(IO_VIRT + 0x29000)
+#define ADC_CR 			0x00
+#define ADC_TSCTRL 		0x04
+#define ADC_BT_CTRL 		0x08
+#define ADC_MC_CTRL		0x0C
+#define ADC_STATUS		0x10
+
+/* ADC control register bits */
+#define ADC_CR_PW_CTRL 		0x80
+#define ADC_CR_DIRECTC		0x04
+#define ADC_CR_CONTIME_NO	0x00
+#define ADC_CR_CONTIME_2	0x04
+#define ADC_CR_CONTIME_4	0x08
+#define ADC_CR_CONTIME_ADE	0x0c
+#define ADC_CR_LONGCALTIME	0x01
+
+/* ADC touch panel register bits */
+#define ADC_TSCTRL_ENABLE 	0x80
+#define ADC_TSCTRL_INTR   	0x40
+#define	ADC_TSCTRL_SWBYPSS	0x20
+#define ADC_TSCTRL_SWINVT	0x10
+#define ADC_TSCTRL_S400   	0x03
+#define ADC_TSCTRL_S200   	0x02
+#define ADC_TSCTRL_S100   	0x01
+#define ADC_TSCTRL_S50    	0x00
+
+/* ADC Interrupt Status Register bits */
+#define ADC_STATUS_TS_BIT	0x80
+#define ADC_STATUS_MBT_BIT	0x40
+#define ADC_STATUS_BBT_BIT	0x20
+#define ADC_STATUS_MIC_BIT	0x10
+
+/* Touch data registers */
+#define ADC_TS_X0X1  		0x30
+#define ADC_TS_X2X3		0x34
+#define ADC_TS_Y0Y1		0x38
+#define ADC_TS_Y2Y3  		0x3c
+#define ADC_TS_X4X5  		0x40
+#define ADC_TS_X6X7  		0x44
+#define ADC_TS_Y4Y5		0x48
+#define ADC_TS_Y6Y7		0x50
+
+/* battery data */
+#define ADC_MB_DATA		0x54
+#define ADC_BB_DATA		0x58
+
+/* Sound data register */
+#define ADC_SD_DAT0 		0x60
+#define ADC_SD_DAT1		0x64
+#define ADC_SD_DAT2		0x68
+#define ADC_SD_DAT3		0x6c
+#define ADC_SD_DAT4		0x70
+#define ADC_SD_DAT5		0x74
+#define ADC_SD_DAT6		0x78
+#define ADC_SD_DAT7		0x7c
diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
new file mode 100644
index 00000000000..6c19156e2a4
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/hardware.h
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-h720x/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define IOCLK (3686400L)
+
+/* Onchip peripherals */
+
+#define IO_VIRT			0xf0000000	/* IO peripherals */
+#define IO_PHYS			0x80000000
+#define IO_SIZE			0x00050000
+
+#ifdef CONFIG_CPU_H7202
+#include "h7202-regs.h"
+#elif defined CONFIG_CPU_H7201
+#include "h7201-regs.h"
+#else
+#error machine definition mismatch
+#endif
+
+/* Macro to access the CPU IO */
+#define CPU_IO(x) (*(volatile u32*)(x))
+
+/* Macro to access general purpose regs (base, offset) */
+#define CPU_REG(x,y) CPU_IO(x+y)
+
+/* Macro to access irq related regs */
+#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
+
+/* CPU registers */
+/* general purpose I/O */
+#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
+#define GPIO_A_VIRT		(GPIO_VIRT(0))
+#define GPIO_B_VIRT		(GPIO_VIRT(1))
+#define GPIO_C_VIRT		(GPIO_VIRT(2))
+#define GPIO_D_VIRT		(GPIO_VIRT(3))
+#define GPIO_E_VIRT		(GPIO_VIRT(4))
+#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
+
+#define AMULSEL_USIN2	(1<<5)
+#define AMULSEL_USOUT2	(1<<6)
+#define AMULSEL_USIN3	(1<<13)
+#define AMULSEL_USOUT3	(1<<14)
+#define AMULSEL_IRDIN	(1<<15)
+#define AMULSEL_IRDOUT	(1<<7)
+
+/* Register offsets general purpose I/O */
+#define GPIO_DATA		0x00
+#define GPIO_DIR		0x04
+#define GPIO_MASK		0x08
+#define GPIO_STAT		0x0C
+#define GPIO_EDGE		0x10
+#define GPIO_CLR		0x14
+#define GPIO_POL		0x18
+#define GPIO_EN			0x1C
+
+/*interrupt controller */
+#define IRQC_VIRT		(IO_VIRT + 0x24000)
+/* register offset interrupt controller */
+#define IRQC_IER		0x00
+#define IRQC_ISR		0x04
+
+/* timer unit */
+#define TIMER_VIRT		(IO_VIRT + 0x25000)
+/* Register offsets timer unit */
+#define TM0_PERIOD   		0x00
+#define TM0_COUNT    		0x08
+#define TM0_CTRL     		0x10
+#define TM1_PERIOD   		0x20
+#define TM1_COUNT    		0x28
+#define TM1_CTRL     		0x30
+#define TM2_PERIOD   		0x40
+#define TM2_COUNT    		0x48
+#define TM2_CTRL     		0x50
+#define TIMER_TOPCTRL		0x60
+#define TIMER_TOPSTAT		0x64
+#define T64_COUNTL		0x80
+#define T64_COUNTH		0x84
+#define T64_CTRL		0x88
+#define T64_BASEL		0x94
+#define T64_BASEH		0x98
+/* Bitmaks timer unit TOPSTAT reg */
+#define TSTAT_T0INT		0x1
+#define TSTAT_T1INT		0x2
+#define TSTAT_T2INT		0x4
+#define TSTAT_T3INT		0x8
+/* Bit description of TMx_CTRL register */
+#define TM_START  		0x1
+#define TM_REPEAT 		0x2
+#define TM_RESET  		0x4
+/* Bit description of TIMER_CTRL register */
+#define ENABLE_TM0_INTR  	0x1
+#define ENABLE_TM1_INTR  	0x2
+#define ENABLE_TM2_INTR  	0x4
+#define TIMER_ENABLE_BIT 	0x8
+#define ENABLE_TIMER64   	0x10
+#define ENABLE_TIMER64_INT	0x20
+
+/* PMU & PLL */
+#define PMU_BASE 		(IO_VIRT + 0x1000)
+#define PMU_MODE		0x00
+#define PMU_STAT   		0x20
+#define PMU_PLL_CTRL 		0x28
+
+/* PMU Mode bits */
+#define PMU_MODE_SLOW		0x00
+#define PMU_MODE_RUN		0x01
+#define PMU_MODE_IDLE		0x02
+#define PMU_MODE_SLEEP		0x03
+#define PMU_MODE_INIT		0x04
+#define PMU_MODE_DEEPSLEEP	0x07
+#define PMU_MODE_WAKEUP		0x08
+
+/* PMU ... */
+#define PLL_2_EN		0x8000
+#define PLL_1_EN		0x4000
+#define PLL_3_MUTE		0x0080
+
+/* Control bits for PMU/ PLL */
+#define PMU_WARMRESET		0x00010000
+#define PLL_CTRL_MASK23		0x000080ff
+
+/* LCD Controller */
+#define LCD_BASE 		(IO_VIRT + 0x10000)
+#define LCD_CTRL 		0x00
+#define LCD_STATUS		0x04
+#define LCD_STATUS_M		0x08
+#define LCD_INTERRUPT		0x0C
+#define LCD_DBAR		0x10
+#define LCD_DCAR		0x14
+#define LCD_TIMING0 		0x20
+#define LCD_TIMING1 		0x24
+#define LCD_TIMING2 		0x28
+#define LCD_TEST		0x40
+
+/* LCD Control Bits */
+#define LCD_CTRL_LCD_ENABLE   	0x00000001
+/* Bits per pixel */
+#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
+#define LCD_CTRL_LCD_4BPP    	0x00000000
+#define LCD_CTRL_LCD_8BPP    	0x00000002
+#define LCD_CTRL_LCD_16BPP   	0x00000004
+#define LCD_CTRL_LCD_BW		0x00000008
+#define LCD_CTRL_LCD_TFT	0x00000010
+#define LCD_CTRL_BGR		0x00001000
+#define LCD_CTRL_LCD_VCOMP	0x00080000
+#define LCD_CTRL_LCD_MONO8	0x00200000
+#define LCD_CTRL_LCD_PWR	0x00400000
+#define LCD_CTRL_LCD_BLE	0x00800000
+#define LCD_CTRL_LDBUSEN	0x01000000
+
+/* Palette */
+#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
+
+/* Serial ports */
+#define SERIAL0_OFS		0x20000
+#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
+#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
+
+#define SERIAL1_OFS		0x21000
+#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
+#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
+
+#define SERIAL_ENABLE		0x30
+#define SERIAL_ENABLE_EN	(1<<0)
+
+/* General defines to pacify gcc */
+#define PCIO_BASE 		(0)	/* for inb, outb and friends */
+#define PCIO_VIRT		PCIO_BASE
+
+#define __ASM_ARCH_HARDWARE_INCMACH_H
+#include "boards.h"
+#undef __ASM_ARCH_HARDWARE_INCMACH_H
+
+#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-h720x/include/mach/io.h b/arch/arm/mach-h720x/include/mach/io.h
new file mode 100644
index 00000000000..1dab74ce88c
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/io.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-h720x/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *
+ *  09-19-2001	JJKIM
+ *  		Created from arch/arm/mach-l7200/include/mach/io.h
+ *
+ *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
+ *  		re-unified header files for h720x
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h
new file mode 100644
index 00000000000..430a92b492f
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-h720x/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#if defined (CONFIG_CPU_H7201)
+
+#define IRQ_PMU		0		/* 0x000001 */
+#define IRQ_DMA		1 		/* 0x000002 */
+#define IRQ_LCD		2		/* 0x000004 */
+#define IRQ_VGA		3 		/* 0x000008 */
+#define IRQ_PCMCIA1 	4 		/* 0x000010 */
+#define IRQ_PCMCIA2 	5 		/* 0x000020 */
+#define IRQ_AFE		6 		/* 0x000040 */
+#define IRQ_AIC		7 		/* 0x000080 */
+#define IRQ_KEYBOARD 	8 		/* 0x000100 */
+#define IRQ_TIMER0	9 		/* 0x000200 */
+#define IRQ_RTC		10		/* 0x000400 */
+#define IRQ_SOUND	11		/* 0x000800 */
+#define IRQ_USB		12		/* 0x001000 */
+#define IRQ_IrDA 	13		/* 0x002000 */
+#define IRQ_UART0	14		/* 0x004000 */
+#define IRQ_UART1	15		/* 0x008000 */
+#define IRQ_SPI		16		/* 0x010000 */
+#define IRQ_GPIOA 	17		/* 0x020000 */
+#define IRQ_GPIOB	18		/* 0x040000 */
+#define IRQ_GPIOC	19		/* 0x080000 */
+#define IRQ_GPIOD	20		/* 0x100000 */
+#define IRQ_CommRX	21		/* 0x200000 */
+#define IRQ_CommTX	22		/* 0x400000 */
+#define IRQ_Soft	23		/* 0x800000 */
+
+#define NR_GLBL_IRQS	24
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
+			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
+
+
+#elif defined (CONFIG_CPU_H7202)
+
+#define IRQ_PMU		0		/* 0x00000001 */
+#define IRQ_DMA		1		/* 0x00000002 */
+#define IRQ_LCD		2		/* 0x00000004 */
+#define IRQ_SOUND	3		/* 0x00000008 */
+#define IRQ_I2S		4		/* 0x00000010 */
+#define IRQ_USB 	5		/* 0x00000020 */
+#define IRQ_MMC 	6		/* 0x00000040 */
+#define IRQ_RTC 	7		/* 0x00000080 */
+#define IRQ_UART0 	8		/* 0x00000100 */
+#define IRQ_UART1 	9		/* 0x00000200 */
+#define IRQ_UART2 	10		/* 0x00000400 */
+#define IRQ_UART3 	11		/* 0x00000800 */
+#define IRQ_KBD 	12		/* 0x00001000 */
+#define IRQ_PS2 	13		/* 0x00002000 */
+#define IRQ_AIC 	14		/* 0x00004000 */
+#define IRQ_TIMER0 	15		/* 0x00008000 */
+#define IRQ_TIMERX 	16		/* 0x00010000 */
+#define IRQ_WDT 	17		/* 0x00020000 */
+#define IRQ_CAN0 	18		/* 0x00040000 */
+#define IRQ_CAN1 	19		/* 0x00080000 */
+#define IRQ_EXT0 	20		/* 0x00100000 */
+#define IRQ_EXT1 	21		/* 0x00200000 */
+#define IRQ_GPIOA 	22		/* 0x00400000 */
+#define IRQ_GPIOB 	23		/* 0x00800000 */
+#define IRQ_GPIOC 	24		/* 0x01000000 */
+#define IRQ_GPIOD 	25		/* 0x02000000 */
+#define IRQ_GPIOE 	26		/* 0x04000000 */
+#define IRQ_COMMRX 	27		/* 0x08000000 */
+#define IRQ_COMMTX 	28		/* 0x10000000 */
+#define IRQ_SMC 	29		/* 0x20000000 */
+#define IRQ_Soft 	30		/* 0x40000000 */
+#define IRQ_RESERVED1 	31		/* 0x80000000 */
+#define NR_GLBL_IRQS	32
+
+#define NR_TIMERX_IRQS	3
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
+#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
+#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
+#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
+#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
+
+#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
+			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
+			(1<<IRQ_TIMERX)
+
+#else
+#error cpu definition mismatch
+#endif
+
+/* decode irq number to register number */
+#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
+#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
new file mode 100644
index 00000000000..cb26f49cc4e
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-h720x/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Jungjun Kim
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Page offset:
+ *    ( 0xc0000000UL )
+ */
+#define PHYS_OFFSET	UL(0x40000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ *
+ * There is something to do here later !, Mar 2000, Jungjun Kim
+ */
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
new file mode 100644
index 00000000000..e4a7c760d52
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <mach/hardware.h>
+
+static void arch_idle(void)
+{
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+	nop();
+	nop();
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+	nop();
+	nop();
+}
+
+
+static __inline__ void arch_reset(char mode)
+{
+	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/arch/arm/mach-h720x/include/mach/timex.h
new file mode 100644
index 00000000000..3f2f447ff36
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-h720x/include/mach/timex.h
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX
+#define __ASM_ARCH_TIMEX
+
+#define CLOCK_TICK_RATE		3686400
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
new file mode 100644
index 00000000000..d6623234f61
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-h720x/include/mach/uncompress.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/hardware.h>
+
+#define LSR 	0x14
+#define TEMPTY 	0x40
+
+static inline void putc(int c)
+{
+	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
+
+	/* wait until transmit buffer is empty */
+	while((p[LSR] & TEMPTY) == 0x0)
+		barrier();
+
+	/* write next character */
+	*p = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..ff1460d6841
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-h720x/include/mach/vmalloc.h
+ */
+
+#ifndef __ARCH_ARM_VMALLOC_H
+#define __ARCH_ARM_VMALLOC_H
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+
+#endif
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 6a90fe5578d..4b4230db376 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 
 #include <asm/io.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imx-regs.h>
 
 /*
  * Very simple approach: We can't disable clocks, so we do
@@ -172,24 +172,29 @@ found:
 
 	return clk;
 }
+EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_put);
 
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
+EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->get_rate();
 }
+EXPORT_SYMBOL(clk_get_rate);
 
 int imx_clocks_init(void)
 {
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index be0809b33e0..434b4ca0af6 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -36,7 +36,7 @@
 #include <linux/err.h>
 #include <asm/system.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index ee1c6f06ff6..c10810c936b 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -30,9 +30,9 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/imx-dma.h>
 
 struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 98ddd8a6d05..fa72174dd95 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -29,13 +29,13 @@
 #include <linux/string.h>
 
 #include <asm/errno.h>
-#include <asm/arch/imxfb.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/imx-regs.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
 
@@ -251,7 +251,6 @@ void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
 {
 	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
 }
-EXPORT_SYMBOL(set_imx_fb_info);
 
 static struct resource imxfb_resources[] = {
 	[0] = {
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..87802bbfe63
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/debug-macro.S
@@ -0,0 +1,34 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00000000	@ physical
+		movne	\rx, #0xe0000000	@ virtual
+		orreq	\rx, \rx, #0x00200000	@ physical
+		orr	\rx, \rx, #0x00006000	@ UART1 offset
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
new file mode 100644
index 00000000000..621ff2c730f
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma.h
@@ -0,0 +1,56 @@
+/*
+ *  linux/include/asm-arm/imxads/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} imx_dma_prio;
+
+#define DMA_REQ_UART3_T        2
+#define DMA_REQ_UART3_R        3
+#define DMA_REQ_SSI2_T         4
+#define DMA_REQ_SSI2_R         5
+#define DMA_REQ_CSI_STAT       6
+#define DMA_REQ_CSI_R          7
+#define DMA_REQ_MSHC           8
+#define DMA_REQ_DSPA_DCT_DOUT  9
+#define DMA_REQ_DSPA_DCT_DIN  10
+#define DMA_REQ_DSPA_MAC      11
+#define DMA_REQ_EXT           12
+#define DMA_REQ_SDHC          13
+#define DMA_REQ_SPI1_R        14
+#define DMA_REQ_SPI1_T        15
+#define DMA_REQ_SSI_T         16
+#define DMA_REQ_SSI_R         17
+#define DMA_REQ_ASP_DAC       18
+#define DMA_REQ_ASP_ADC       19
+#define DMA_REQ_USP_EP(x)    (20+(x))
+#define DMA_REQ_SPI2_R        26
+#define DMA_REQ_SPI2_T        27
+#define DMA_REQ_UART2_T       28
+#define DMA_REQ_UART2_R       29
+#define DMA_REQ_UART1_T       30
+#define DMA_REQ_UART1_R       31
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..e4db679f776
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-imx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for iMX-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#define AITC_NIVECSR   0x40
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
+		@ Load offset & priority of the highest priority
+		@ interrupt pending.
+		ldr	\irqstat, [\base, #AITC_NIVECSR]
+		@ Shift off the priority leaving the offset or
+		@ "interrupt number", use arithmetic shift to
+		@ transform illegal source (0xffff) as -1
+		mov	\irqnr, \irqstat, asr #16
+		adds	\tmp, \irqnr, #1
+		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
new file mode 100644
index 00000000000..6e3d795f226
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -0,0 +1,102 @@
+#ifndef _IMX_GPIO_H
+
+#include <mach/imx-regs.h>
+
+#define IMX_GPIO_ALLOC_MODE_NORMAL	0
+#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
+#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
+#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
+#define IMX_GPIO_ALLOC_MODE_RELEASE	8
+
+extern int imx_gpio_request(unsigned gpio, const char *label);
+
+extern void imx_gpio_free(unsigned gpio);
+
+extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+					int alloc_mode, const char *label);
+
+extern int imx_gpio_direction_input(unsigned gpio);
+
+extern int imx_gpio_direction_output(unsigned gpio, int value);
+
+extern void __imx_gpio_set_value(unsigned gpio, int value);
+
+static inline int imx_gpio_get_value(unsigned gpio)
+{
+	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
+}
+
+static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	if(value)
+		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
+	else
+		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
+	raw_local_irq_restore(flags);
+}
+
+static inline void imx_gpio_set_value(unsigned gpio, int value)
+{
+	if(__builtin_constant_p(gpio))
+		imx_gpio_set_value_inline(gpio, value);
+	else
+		__imx_gpio_set_value(gpio, value);
+}
+
+extern int imx_gpio_to_irq(unsigned gpio);
+
+extern int imx_irq_to_gpio(unsigned irq);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
+ * to allow future extension of GPIO logic.
+ */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return imx_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	imx_gpio_free(gpio);
+}
+
+static inline  int gpio_direction_input(unsigned gpio)
+{
+	return imx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return imx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return imx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	imx_gpio_set_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return imx_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return imx_irq_to_gpio(irq);
+}
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
new file mode 100644
index 00000000000..c73e9e724c7
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/hardware.h
@@ -0,0 +1,91 @@
+/*
+ *  arch/arm/mach-imx/include/mach/hardware.h
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include "imx-regs.h"
+
+#ifndef __ASSEMBLY__
+# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
+
+# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#endif
+
+/*
+ * Memory map
+ */
+
+#define IMX_IO_PHYS		0x00200000
+#define IMX_IO_SIZE		0x00100000
+#define IMX_IO_BASE		0xe0000000
+
+#define IMX_CS0_PHYS		0x10000000
+#define IMX_CS0_SIZE		0x02000000
+#define IMX_CS0_VIRT		0xe8000000
+
+#define IMX_CS1_PHYS		0x12000000
+#define IMX_CS1_SIZE		0x01000000
+#define IMX_CS1_VIRT		0xea000000
+
+#define IMX_CS2_PHYS		0x13000000
+#define IMX_CS2_SIZE		0x01000000
+#define IMX_CS2_VIRT		0xeb000000
+
+#define IMX_CS3_PHYS		0x14000000
+#define IMX_CS3_SIZE		0x01000000
+#define IMX_CS3_VIRT		0xec000000
+
+#define IMX_CS4_PHYS		0x15000000
+#define IMX_CS4_SIZE		0x01000000
+#define IMX_CS4_VIRT		0xed000000
+
+#define IMX_CS5_PHYS		0x16000000
+#define IMX_CS5_SIZE		0x01000000
+#define IMX_CS5_VIRT		0xee000000
+
+#define IMX_FB_VIRT		0xF1000000
+#define IMX_FB_SIZE		(256*1024)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
+#ifndef __ASSEMBLY__
+/*
+ * Handy routine to set GPIO functions
+ */
+extern void imx_gpio_mode( int gpio_mode );
+
+#endif
+
+#define MAXIRQNUM                       62
+#define MAXFIQNUM                       62
+#define MAXSWINUM                       62
+
+/*
+ * Use SDRAM for memory
+ */
+#define MEM_SIZE		0x01000000
+
+#ifdef CONFIG_ARCH_MX1ADS
+#include "mx1ads.h"
+#endif
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
new file mode 100644
index 00000000000..44d89c35539
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imx-dma.h
@@ -0,0 +1,94 @@
+/*
+ *  linux/include/asm-arm/imxads/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <asm/dma.h>
+
+#ifndef __ASM_ARCH_IMX_DMA_H
+#define __ASM_ARCH_IMX_DMA_H
+
+#define IMX_DMA_CHANNELS  11
+
+/*
+ * struct imx_dma_channel - i.MX specific DMA extension
+ * @name: name specified by DMA client
+ * @irq_handler: client callback for end of transfer
+ * @err_handler: client callback for error condition
+ * @data: clients context data for callbacks
+ * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
+ * @sg: pointer to the actual read/written chunk for scatter-gather emulation
+ * @sgbc: counter of processed bytes in the actual read/written chunk
+ * @resbytes: total residual number of bytes to transfer
+ *            (it can be lower or same as sum of SG mapped chunk sizes)
+ * @sgcount: number of chunks to be read/written
+ *
+ * Structure is used for IMX DMA processing. It would be probably good
+ * @struct dma_struct in the future for external interfacing and use
+ * @struct imx_dma_channel only as extension to it.
+ */
+
+struct imx_dma_channel {
+	const char *name;
+	void (*irq_handler) (int, void *);
+	void (*err_handler) (int, void *, int errcode);
+	void *data;
+	dmamode_t  dma_mode;
+	struct scatterlist *sg;
+	unsigned int sgbc;
+	unsigned int sgcount;
+	unsigned int resbytes;
+	int dma_num;
+};
+
+extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
+
+#define IMX_DMA_ERR_BURST     1
+#define IMX_DMA_ERR_REQUEST   2
+#define IMX_DMA_ERR_TRANSFER  4
+#define IMX_DMA_ERR_BUFFER    8
+
+/* The type to distinguish channel numbers parameter from ordinal int type */
+typedef int imx_dmach_t;
+
+int
+imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
+		unsigned int dma_length, unsigned int dev_addr, dmamode_t dmamode);
+
+int
+imx_dma_setup_sg(imx_dmach_t dma_ch,
+		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
+		 unsigned int dev_addr, dmamode_t dmamode);
+
+int
+imx_dma_setup_handlers(imx_dmach_t dma_ch,
+		void (*irq_handler) (int, void *),
+		void (*err_handler) (int, void *, int), void *data);
+
+void imx_dma_enable(imx_dmach_t dma_ch);
+
+void imx_dma_disable(imx_dmach_t dma_ch);
+
+int imx_dma_request(imx_dmach_t dma_ch, const char *name);
+
+void imx_dma_free(imx_dmach_t dma_ch);
+
+imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
+
+
+#endif	/* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
new file mode 100644
index 00000000000..fb9de273387
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imx-regs.h
@@ -0,0 +1,482 @@
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+/* ------------------------------------------------------------------------
+ *  Motorola IMX system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ *  Register BASEs, based on OFFSETs
+ *
+ */
+#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
+#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
+#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
+#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
+#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
+#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
+#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
+#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
+#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
+#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
+#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
+#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
+#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
+#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
+#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
+#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
+#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
+#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
+#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
+#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
+#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
+#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
+#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
+#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
+
+/* PLL registers */
+#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
+#define CSCR_SPLL_RESTART	(1<<22)
+#define CSCR_MPLL_RESTART	(1<<21)
+#define CSCR_SYSTEM_SEL		(1<<16)
+#define CSCR_BCLK_DIV		(0xf<<10)
+#define CSCR_MPU_PRESC		(1<<15)
+#define CSCR_SPEN		(1<<1)
+#define CSCR_MPEN		(1<<0)
+
+#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
+#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
+#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
+#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
+#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
+
+/*
+ *  GPIO Module and I/O Multiplexer
+ *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
+#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
+#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
+#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
+#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
+#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
+#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
+#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
+#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
+#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
+#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
+#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
+#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
+#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
+#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
+#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
+#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
+
+#define GPIO_PORT_MAX  3
+
+#define GPIO_PIN_MASK 0x1f
+#define GPIO_PORT_MASK (0x3 << 5)
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORTA (0<<5)
+#define GPIO_PORTB (1<<5)
+#define GPIO_PORTC (2<<5)
+#define GPIO_PORTD (3<<5)
+
+#define GPIO_OUT   (1<<7)
+#define GPIO_IN    (0<<7)
+#define GPIO_PUEN  (1<<8)
+
+#define GPIO_PF    (0<<9)
+#define GPIO_AF    (1<<9)
+
+#define GPIO_OCR_SHIFT 10
+#define GPIO_OCR_MASK (3<<10)
+#define GPIO_AIN   (0<<10)
+#define GPIO_BIN   (1<<10)
+#define GPIO_CIN   (2<<10)
+#define GPIO_DR    (3<<10)
+
+#define GPIO_AOUT_SHIFT 12
+#define GPIO_AOUT_MASK (3<<12)
+#define GPIO_AOUT     (0<<12)
+#define GPIO_AOUT_ISR (1<<12)
+#define GPIO_AOUT_0   (2<<12)
+#define GPIO_AOUT_1   (3<<12)
+
+#define GPIO_BOUT_SHIFT 14
+#define GPIO_BOUT_MASK (3<<14)
+#define GPIO_BOUT      (0<<14)
+#define GPIO_BOUT_ISR  (1<<14)
+#define GPIO_BOUT_0    (2<<14)
+#define GPIO_BOUT_1    (3<<14)
+
+#define GPIO_GIUS      (1<<16)
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
+#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
+#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
+#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
+#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
+#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
+#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
+#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
+#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
+#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
+#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
+#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
+#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
+#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
+#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
+#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
+#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
+#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
+#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
+#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
+#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
+#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
+#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
+#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
+#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
+#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
+#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
+#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
+#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
+#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
+#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
+#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
+#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
+#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
+#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
+#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
+#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
+#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
+#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
+#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
+#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
+#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
+#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
+#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
+#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
+#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
+#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
+#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
+#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
+#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
+#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
+#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
+#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
+#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
+#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
+#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
+#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
+#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
+#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
+#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
+#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
+#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
+#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
+#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
+#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
+#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
+#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
+#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
+#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
+#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
+#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
+#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
+#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
+#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
+#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
+#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
+#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
+#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
+#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
+#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
+#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
+#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
+#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
+#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
+#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
+#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
+#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
+#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
+#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
+#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
+#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
+#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
+#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
+#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
+#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
+#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
+#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
+#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
+#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
+#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
+#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
+#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
+#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
+#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
+#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
+#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
+#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
+#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
+#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
+#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
+#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
+#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
+#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
+#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
+#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
+#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
+#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
+#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
+#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
+#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
+#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
+#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
+#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
+#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
+#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
+#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
+#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
+#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
+#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
+
+/*
+ * PWM controller
+ */
+#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
+#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
+#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
+#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
+
+#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
+#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
+#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
+#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
+#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
+#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
+#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
+#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
+#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
+#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
+#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
+
+#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
+#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
+#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
+
+/*
+ *  DMA Controller
+ */
+#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
+#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
+#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
+#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
+#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
+#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
+#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
+#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
+#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
+#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
+#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
+#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
+#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
+#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
+#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
+#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
+#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
+#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
+#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
+#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
+#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
+#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
+
+#define DCR_DRST           (1<<1)
+#define DCR_DEN            (1<<0)
+#define DBTOCR_EN          (1<<15)
+#define DBTOCR_CNT(x)      ((x) & 0x7fff )
+#define CNTR_CNT(x)        ((x) & 0xffffff )
+#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
+#define CCR_DMOD_2D        ( 0x1 << 12 )
+#define CCR_DMOD_FIFO      ( 0x2 << 12 )
+#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
+#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
+#define CCR_SMOD_2D        ( 0x1 << 10 )
+#define CCR_SMOD_FIFO      ( 0x2 << 10 )
+#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
+#define CCR_MDIR_DEC       (1<<9)
+#define CCR_MSEL_B         (1<<8)
+#define CCR_DSIZ_32        ( 0x0 << 6 )
+#define CCR_DSIZ_8         ( 0x1 << 6 )
+#define CCR_DSIZ_16        ( 0x2 << 6 )
+#define CCR_SSIZ_32        ( 0x0 << 4 )
+#define CCR_SSIZ_8         ( 0x1 << 4 )
+#define CCR_SSIZ_16        ( 0x2 << 4 )
+#define CCR_REN            (1<<3)
+#define CCR_RPT            (1<<2)
+#define CCR_FRC            (1<<1)
+#define CCR_CEN            (1<<0)
+#define RTOR_EN            (1<<15)
+#define RTOR_CLK           (1<<14)
+#define RTOR_PSC           (1<<13)
+
+/*
+ *  Interrupt controller
+ */
+
+#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
+#define INTCNTL_FIAD       (1<<19)
+#define INTCNTL_NIAD       (1<<20)
+
+#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
+#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
+#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
+#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
+#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
+
+/*
+ *  General purpose timers
+ */
+#define IMX_TCTL(x)        __REG( 0x00 + (x))
+#define TCTL_SWR           (1<<15)
+#define TCTL_FRR           (1<<8)
+#define TCTL_CAP_RIS       (1<<6)
+#define TCTL_CAP_FAL       (2<<6)
+#define TCTL_CAP_RIS_FAL   (3<<6)
+#define TCTL_OM            (1<<5)
+#define TCTL_IRQEN         (1<<4)
+#define TCTL_CLK_PCLK1     (1<<1)
+#define TCTL_CLK_PCLK1_16  (2<<1)
+#define TCTL_CLK_TIN       (3<<1)
+#define TCTL_CLK_32        (4<<1)
+#define TCTL_TEN           (1<<0)
+
+#define IMX_TPRER(x)       __REG( 0x04 + (x))
+#define IMX_TCMP(x)        __REG( 0x08 + (x))
+#define IMX_TCR(x)         __REG( 0x0C + (x))
+#define IMX_TCN(x)         __REG( 0x10 + (x))
+#define IMX_TSTAT(x)       __REG( 0x14 + (x))
+#define TSTAT_CAPT         (1<<1)
+#define TSTAT_COMP         (1<<0)
+
+/*
+ * LCD Controller
+ */
+
+#define LCDC_SSA	__REG(IMX_LCDC_BASE+0x00)
+
+#define LCDC_SIZE	__REG(IMX_LCDC_BASE+0x04)
+#define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
+#define SIZE_YMAX(y)    ( (y) & 0x1ff )
+
+#define LCDC_VPW	__REG(IMX_LCDC_BASE+0x08)
+#define VPW_VPW(x)	( (x) & 0x3ff )
+
+#define LCDC_CPOS	__REG(IMX_LCDC_BASE+0x0C)
+#define CPOS_CC1        (1<<31)
+#define CPOS_CC0        (1<<30)
+#define CPOS_OP         (1<<28)
+#define CPOS_CXP(x)     (((x) & 3ff) << 16)
+#define CPOS_CYP(y)     ((y) & 0x1ff)
+
+#define LCDC_LCWHB	__REG(IMX_LCDC_BASE+0x10)
+#define LCWHB_BK_EN     (1<<31)
+#define LCWHB_CW(w)     (((w) & 0x1f) << 24)
+#define LCWHB_CH(h)     (((h) & 0x1f) << 16)
+#define LCWHB_BD(x)     ((x) & 0xff)
+
+#define LCDC_LCHCC	__REG(IMX_LCDC_BASE+0x14)
+#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+
+#define LCDC_PCR	__REG(IMX_LCDC_BASE+0x18)
+#define PCR_TFT         (1<<31)
+#define PCR_COLOR       (1<<30)
+#define PCR_PBSIZ_1     (0<<28)
+#define PCR_PBSIZ_2     (1<<28)
+#define PCR_PBSIZ_4     (2<<28)
+#define PCR_PBSIZ_8     (3<<28)
+#define PCR_BPIX_1      (0<<25)
+#define PCR_BPIX_2      (1<<25)
+#define PCR_BPIX_4      (2<<25)
+#define PCR_BPIX_8      (3<<25)
+#define PCR_BPIX_12     (4<<25)
+#define PCR_BPIX_16     (4<<25)
+#define PCR_PIXPOL      (1<<24)
+#define PCR_FLMPOL      (1<<23)
+#define PCR_LPPOL       (1<<22)
+#define PCR_CLKPOL      (1<<21)
+#define PCR_OEPOL       (1<<20)
+#define PCR_SCLKIDLE    (1<<19)
+#define PCR_END_SEL     (1<<18)
+#define PCR_END_BYTE_SWAP (1<<17)
+#define PCR_REV_VS      (1<<16)
+#define PCR_ACD_SEL     (1<<15)
+#define PCR_ACD(x)      (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL    (1<<7)
+#define PCR_SHARP       (1<<6)
+#define PCR_PCD(x)      ((x) & 0x3f)
+
+#define LCDC_HCR	__REG(IMX_LCDC_BASE+0x1C)
+#define HCR_H_WIDTH(x)  (((x) & 0x3f) << 26)
+#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
+#define HCR_H_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_VCR	__REG(IMX_LCDC_BASE+0x20)
+#define VCR_V_WIDTH(x)  (((x) & 0x3f) << 26)
+#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
+#define VCR_V_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_POS	__REG(IMX_LCDC_BASE+0x24)
+#define POS_POS(x)      ((x) & 1f)
+
+#define LCDC_LSCR1	__REG(IMX_LCDC_BASE+0x28)
+#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x)            (((x) & 0xf))
+
+#define LCDC_PWMR	__REG(IMX_LCDC_BASE+0x2C)
+#define PWMR_CLS(x)     (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK      (1<<15)
+#define PWMR_SCR1       (1<<10)
+#define PWMR_SCR0       (1<<9)
+#define PWMR_CC_EN      (1<<8)
+#define PWMR_PW(x)      ((x) & 0xff)
+
+#define LCDC_DMACR	__REG(IMX_LCDC_BASE+0x30)
+#define DMACR_BURST     (1<<31)
+#define DMACR_HM(x)     (((x) & 0xf) << 16)
+#define DMACR_TM(x)     ((x) &0xf)
+
+#define LCDC_RMCR	__REG(IMX_LCDC_BASE+0x34)
+#define RMCR_LCDC_EN		(1<<1)
+#define RMCR_SELF_REF		(1<<0)
+
+#define LCDC_LCDICR	__REG(IMX_LCDC_BASE+0x38)
+#define LCDICR_INT_SYN  (1<<2)
+#define LCDICR_INT_CON  (1)
+
+#define LCDC_LCDISR	__REG(IMX_LCDC_BASE+0x40)
+#define LCDISR_UDR_ERR (1<<3)
+#define LCDISR_ERR_RES (1<<2)
+#define LCDISR_EOF     (1<<1)
+#define LCDISR_BOF     (1<<0)
+
+#endif				// _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
new file mode 100644
index 00000000000..d54eb1d4802
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imx-uart.h
@@ -0,0 +1,12 @@
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+	int (*init)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
+	unsigned int flags;
+};
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
new file mode 100644
index 00000000000..3ed9ec8b9f0
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imxfb.h
@@ -0,0 +1,37 @@
+/*
+ * This structure describes the machine which we are running on.
+ */
+struct imxfb_mach_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_int		nonstd;
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		pcr;
+	u_int		pwmr;
+	u_int		lscr1;
+	u_int		dmacr;
+
+	u_char * fixed_screen_cpu;
+	dma_addr_t fixed_screen_dma;
+
+	void (*lcd_power)(int);
+	void (*backlight_power)(int);
+};
+void set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info);
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
new file mode 100644
index 00000000000..c50c5fa6fb8
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/io.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
new file mode 100644
index 00000000000..eb8d5bd05d5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <mach/hardware.h>
+
+/*
+ *  IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT                 0
+#define CSI_INT                     6
+#define DSPA_MAC_INT                7
+#define DSPA_INT                    8
+#define COMP_INT                    9
+#define MSHC_XINT                   10
+#define GPIO_INT_PORTA              11
+#define GPIO_INT_PORTB              12
+#define GPIO_INT_PORTC              13
+#define LCDC_INT                    14
+#define SIM_INT                     15
+#define SIM_DATA_INT                16
+#define RTC_INT                     17
+#define RTC_SAMINT                  18
+#define UART2_MINT_PFERR            19
+#define UART2_MINT_RTS              20
+#define UART2_MINT_DTR              21
+#define UART2_MINT_UARTC            22
+#define UART2_MINT_TX               23
+#define UART2_MINT_RX               24
+#define UART1_MINT_PFERR            25
+#define UART1_MINT_RTS              26
+#define UART1_MINT_DTR              27
+#define UART1_MINT_UARTC            28
+#define UART1_MINT_TX               29
+#define UART1_MINT_RX               30
+#define VOICE_DAC_INT               31
+#define VOICE_ADC_INT               32
+#define PEN_DATA_INT                33
+#define PWM_INT                     34
+#define SDHC_INT                    35
+#define I2C_INT                     39
+#define CSPI_INT                    41
+#define SSI_TX_INT                  42
+#define SSI_TX_ERR_INT              43
+#define SSI_RX_INT                  44
+#define SSI_RX_ERR_INT              45
+#define TOUCH_INT                   46
+#define USBD_INT0                   47
+#define USBD_INT1                   48
+#define USBD_INT2                   49
+#define USBD_INT3                   50
+#define USBD_INT4                   51
+#define USBD_INT5                   52
+#define USBD_INT6                   53
+#define BTSYS_INT                   55
+#define BTTIM_INT                   56
+#define BTWUI_INT                   57
+#define TIM2_INT                    58
+#define TIM1_INT                    59
+#define DMA_ERR                     60
+#define DMA_INT                     61
+#define GPIO_INT_PORTD              62
+
+#define IMX_IRQS                         (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ *       the following pins are connected to the outside
+ *       world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ *   - mapping the interrupts without holes would get
+ *     far more complicated
+ *   - Motorola could well decide to bring some processor
+ *     with more pins connected
+ */
+
+#define IRQ_GPIOA(x)  (IMX_IRQS + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
new file mode 100644
index 00000000000..5c453063c0e
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-imx/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET	UL(0x08000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x)	(x - PHYS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
new file mode 100644
index 00000000000..4712f354dcc
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mmc.h
@@ -0,0 +1,15 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct device;
+
+struct imxmmc_platform_data {
+	int (*card_present)(struct device *);
+	int (*get_ro)(struct device *);
+};
+
+extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
new file mode 100644
index 00000000000..def05d510eb
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx1ads.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-imx/include/mach/mx1ads.h
+ *
+ * Copyright (C) 2004 Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_MX1ADS_H
+#define __ASM_ARCH_MX1ADS_H
+
+/* ------------------------------------------------------------------------ */
+/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
+/* ------------------------------------------------------------------------ */
+
+#define MX1ADS_FLASH_PHYS		0x10000000
+#define MX1ADS_FLASH_SIZE		(16*1024*1024)
+
+#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
+
+#define CLK32 32000
+
+#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
new file mode 100644
index 00000000000..4186430feec
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/spi_imx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/mach-imx/include/mach/spi_imx.h
+ *
+ * Copyright (C) 2006 SWAPP
+ *	Andrea Paterniani <a.paterniani@swapp-eng.it>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef SPI_IMX_H_
+#define SPI_IMX_H_
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *	SPI slaves, and are numbered from zero to num_chipselects - 1.
+ *	each slave has a chipselect signal, but it's common that not
+ *	every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+*/
+struct spi_imx_master {
+	u8 num_chipselect;
+	u8 enable_dma:1;
+};
+/*-------------------------------------------------------------------------*/
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct spi_imx_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ * @enable_loopback : used for test purpouse to internally connect RX and TX
+ *	sections.
+ * @enable_dma : enables dma transfer (provided that controller driver has
+ *	dma enabled too).
+ * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
+ * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
+ * @cs_control : function pointer to board-specific function to assert/deassert
+ *	I/O port to control HW generation of devices chip-select.
+*/
+struct spi_imx_chip {
+	u8	enable_loopback:1;
+	u8	enable_dma:1;
+	u8	ins_ss_pulse:1;
+	u16	bclk_wait:15;
+	void (*cs_control)(u32 control);
+};
+
+/* Chip-select state */
+#define SPI_CS_ASSERT			(1 << 0)
+#define SPI_CS_DEASSERT			(1 << 1)
+/*-------------------------------------------------------------------------*/
+
+
+#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
new file mode 100644
index 00000000000..adee7e51bab
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void
+arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void
+arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-imx/include/mach/timex.h
new file mode 100644
index 00000000000..e22ba789546
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ *  linux/include/asm-arm/imx/timex.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		(16000000)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
new file mode 100644
index 00000000000..70523e67a8f
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/uncompress.h
@@ -0,0 +1,71 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define UART1_BASE 0x206000
+#define UART2_BASE 0x207000
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = UART1_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		serial_port = UART2_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		return;
+	} while(0);
+
+	while (!(UART(USR2) & USR2_TXFE))
+		barrier();
+
+	UART(TXR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..7d7cb0bde3e
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-imx/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index e6695c4e623..798f221eb3b 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -27,7 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
@@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 	reg = irq >> 5;
 	bit = 1 << (irq % 32);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
 		   GPIOs set to alternate function during probe */
 		/* TODO: support probe */
@@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 //                      return 0;
 //              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
 //                      return 0;
-//              type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
 	GIUS(reg) |= bit;
@@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 
 	DEBUG_IRQ("setting type of irq %d to ", _irq);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		irq_type = 0x0;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		irq_type = 0x1;
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		irq_type = 0x3;
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		irq_type = 0x2;
 	}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index 79236404aec..af81621f689 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -13,7 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index 9635d5812bc..87fa1ff43b0 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -25,8 +25,8 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
 #include <linux/interrupt.h>
 #include "generic.h"
 
@@ -125,7 +125,7 @@ static struct platform_device *devices[] __initdata = {
 	&imx_uart2_device,
 };
 
-#ifdef CONFIG_MMC_IMX
+#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
 static int mx1ads_mmc_card_present(struct device *dev)
 {
 	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
@@ -143,7 +143,7 @@ mx1ads_init(void)
 #ifdef CONFIG_LEDS
 	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
 #endif
-#ifdef CONFIG_MMC_IMX
+#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
 	/* SD/MMC card detect */
 	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
 	imx_set_mmc_info(&mx1ads_mmc_info);
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 5a41e96e858..08be3875c59 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -19,7 +19,7 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 7fbbc17f8e8..8bacf6d4d09 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,11 +20,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 71c58bff304..7c49d55e6b2 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
  *
- *  $Id: cpu.c,v 1.6 2002/07/18 13:58:51 rmk Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -20,7 +18,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 62e653a3ea1..3c8383dbe9e 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -23,8 +23,8 @@
 
 #include <asm/io.h>
 #include <asm/hardware/icst525.h>
-#include <asm/arch/lm.h>
-#include <asm/arch/impd1.h>
+#include <mach/lm.h>
+#include <mach/impd1.h>
 #include <asm/sizes.h>
 
 #include "clock.h"
@@ -393,9 +393,7 @@ static int impd1_probe(struct lm_device *dev)
 		if (!d)
 			continue;
 
-		snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
-			 "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-
+		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
 		d->dev.parent	= &dev->dev;
 		d->res.start	= dev->resource.start + idev->offset;
 		d->res.end	= d->res.start + SZ_4K - 1;
@@ -407,8 +405,7 @@ static int impd1_probe(struct lm_device *dev)
 
 		ret = amba_device_register(d, &dev->resource);
 		if (ret) {
-			printk("unable to register device %s: %d\n",
-				d->dev.bus_id, ret);
+			dev_err(&d->dev, "unable to register device: %d\n", ret);
 			kfree(d);
 		}
 	}
diff --git a/arch/arm/mach-integrator/include/mach/bits.h b/arch/arm/mach-integrator/include/mach/bits.h
new file mode 100644
index 00000000000..09b024e0496
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/bits.h
@@ -0,0 +1,61 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Bit field definitions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __bits_h
+#define __bits_h                        1
+
+#define BIT0                            0x00000001
+#define BIT1                            0x00000002
+#define BIT2                            0x00000004
+#define BIT3                            0x00000008
+#define BIT4                            0x00000010
+#define BIT5                            0x00000020
+#define BIT6                            0x00000040
+#define BIT7                            0x00000080
+#define BIT8                            0x00000100
+#define BIT9                            0x00000200
+#define BIT10                           0x00000400
+#define BIT11                           0x00000800
+#define BIT12                           0x00001000
+#define BIT13                           0x00002000
+#define BIT14                           0x00004000
+#define BIT15                           0x00008000
+#define BIT16                           0x00010000
+#define BIT17                           0x00020000
+#define BIT18                           0x00040000
+#define BIT19                           0x00080000
+#define BIT20                           0x00100000
+#define BIT21                           0x00200000
+#define BIT22                           0x00400000
+#define BIT23                           0x00800000
+#define BIT24                           0x01000000
+#define BIT25                           0x02000000
+#define BIT26                           0x04000000
+#define BIT27                           0x08000000
+#define BIT28                           0x10000000
+#define BIT29                           0x20000000
+#define BIT30                           0x40000000
+#define BIT31                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
new file mode 100644
index 00000000000..1ab353e2359
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -0,0 +1,36 @@
+/*
+ * update the core module control register.
+ */
+void cm_control(u32, u32);
+
+#define CM_CTRL_LED			(1 << 0)
+#define CM_CTRL_nMBDET			(1 << 1)
+#define CM_CTRL_REMAP			(1 << 2)
+#define CM_CTRL_RESET			(1 << 3)
+
+/*
+ * Integrator/AP,PP2 specific
+ */
+#define CM_CTRL_HIGHVECTORS		(1 << 4)
+#define CM_CTRL_BIGENDIAN		(1 << 5)
+#define CM_CTRL_FASTBUS			(1 << 6)
+#define CM_CTRL_SYNC			(1 << 7)
+
+/*
+ * ARM926/946/966 Integrator/CP specific
+ */
+#define CM_CTRL_LCDBIASEN		(1 << 8)
+#define CM_CTRL_LCDBIASUP		(1 << 9)
+#define CM_CTRL_LCDBIASDN		(1 << 10)
+#define CM_CTRL_LCDMUXSEL_MASK		(7 << 11)
+#define CM_CTRL_LCDMUXSEL_GENLCD	(1 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA_16BPP	(2 << 11)
+#define CM_CTRL_LCDMUXSEL_SHARPLCD	(3 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA_8421BPP	(4 << 11)
+#define CM_CTRL_LCDEN0			(1 << 14)
+#define CM_CTRL_LCDEN1			(1 << 15)
+#define CM_CTRL_STATIC1			(1 << 16)
+#define CM_CTRL_STATIC2			(1 << 17)
+#define CM_CTRL_STATIC			(1 << 18)
+#define CM_CTRL_n24BITEN		(1 << 19)
+#define CM_CTRL_EBIWP			(1 << 20)
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
new file mode 100644
index 00000000000..d347d659ea3
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-integrator/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x16000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x16000000 >> 4
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-integrator/include/mach/dma.h b/arch/arm/mach-integrator/include/mach/dma.h
new file mode 100644
index 00000000000..fbebe85a2db
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
new file mode 100644
index 00000000000..7649c57acb5
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-integrator/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Integrator platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* FIXME: should not be using soo many LDRs here */
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
+		mov	\irqnr, #IRQ_PIC_START
+		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
+		teq	\irqstat, #0
+		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
+		moveq	\irqnr, #IRQ_CIC_START
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+		.endm
+
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
new file mode 100644
index 00000000000..1251319ef9a
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -0,0 +1,48 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 // VA of IO 
+#define IO_SIZE			0x0B000000                 // How much?
+#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
+
+#define PCIO_BASE		PCI_IO_VADDR
+#define PCIMEM_BASE		PCI_MEMORY_VADDR
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x6000
+#define PCIBIOS_MIN_MEM 	0x00100000
+
+#endif
+
diff --git a/arch/arm/mach-integrator/include/mach/impd1.h b/arch/arm/mach-integrator/include/mach/impd1.h
new file mode 100644
index 00000000000..d75de4b1423
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/impd1.h
@@ -0,0 +1,18 @@
+#define IMPD1_OSC1	0x00
+#define IMPD1_OSC2	0x04
+#define IMPD1_LOCK	0x08
+#define IMPD1_LEDS	0x0c
+#define IMPD1_INT	0x10
+#define IMPD1_SW	0x14
+#define IMPD1_CTRL	0x18
+
+#define IMPD1_CTRL_DISP_LCD	(0 << 0)
+#define IMPD1_CTRL_DISP_VGA	(1 << 0)
+#define IMPD1_CTRL_DISP_LCD1	(2 << 0)
+#define IMPD1_CTRL_DISP_ENABLE	(1 << 2)
+#define IMPD1_CTRL_DISP_MASK	(7 << 0)
+
+struct device;
+
+void impd1_tweak_control(struct device *dev, u32 mask, u32 val);
+
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
new file mode 100644
index 00000000000..f21bb5493dd
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/io.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR        0xe8000000
+#define PCI_CONFIG_VADDR        0xec000000
+#define PCI_V3_VADDR            0xed000000
+#define PCI_IO_VADDR            0xee000000
+
+#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
new file mode 100644
index 00000000000..1fbe6d19022
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* 
+ *  Interrupt numbers
+ */
+#define IRQ_PIC_START			0
+#define IRQ_SOFTINT			0
+#define IRQ_UARTINT0			1
+#define IRQ_UARTINT1			2
+#define IRQ_KMIINT0			3
+#define IRQ_KMIINT1			4
+#define IRQ_TIMERINT0			5
+#define IRQ_TIMERINT1			6
+#define IRQ_TIMERINT2			7
+#define IRQ_RTCINT			8
+#define IRQ_AP_EXPINT0			9
+#define IRQ_AP_EXPINT1			10
+#define IRQ_AP_EXPINT2			11
+#define IRQ_AP_EXPINT3			12
+#define IRQ_AP_PCIINT0			13
+#define IRQ_AP_PCIINT1			14
+#define IRQ_AP_PCIINT2			15
+#define IRQ_AP_PCIINT3			16
+#define IRQ_AP_V3INT			17
+#define IRQ_AP_CPINT0			18
+#define IRQ_AP_CPINT1			19
+#define IRQ_AP_LBUSTIMEOUT 		20
+#define IRQ_AP_APCINT			21
+#define IRQ_CP_CLCDCINT			22
+#define IRQ_CP_MMCIINT0			23
+#define IRQ_CP_MMCIINT1			24
+#define IRQ_CP_AACIINT			25
+#define IRQ_CP_CPPLDINT			26
+#define IRQ_CP_ETHINT			27
+#define IRQ_CP_TSPENINT			28
+#define IRQ_PIC_END			31
+
+#define IRQ_CIC_START			32
+#define IRQ_CM_SOFTINT			32
+#define IRQ_CM_COMMRX			33
+#define IRQ_CM_COMMTX			34
+#define IRQ_CIC_END			34
+
+/*
+ * IntegratorCP only
+ */
+#define IRQ_SIC_START			35
+#define IRQ_SIC_CP_SOFTINT		35
+#define IRQ_SIC_CP_RI0			36
+#define IRQ_SIC_CP_RI1			37
+#define IRQ_SIC_CP_CARDIN		38
+#define IRQ_SIC_CP_LMINT0		39
+#define IRQ_SIC_CP_LMINT1		40
+#define IRQ_SIC_CP_LMINT2		41
+#define IRQ_SIC_CP_LMINT3		42
+#define IRQ_SIC_CP_LMINT4		43
+#define IRQ_SIC_CP_LMINT5		44
+#define IRQ_SIC_CP_LMINT6		45
+#define IRQ_SIC_CP_LMINT7		46
+#define IRQ_SIC_END			46
+
+#define NR_IRQS                         47
+
diff --git a/arch/arm/mach-integrator/include/mach/lm.h b/arch/arm/mach-integrator/include/mach/lm.h
new file mode 100644
index 00000000000..28186b6f2c0
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/lm.h
@@ -0,0 +1,23 @@
+
+struct lm_device {
+	struct device		dev;
+	struct resource		resource;
+	unsigned int		irq;
+	unsigned int		id;
+};
+
+struct lm_driver {
+	struct device_driver	drv;
+	int			(*probe)(struct lm_device *);
+	void			(*remove)(struct lm_device *);
+	int			(*suspend)(struct lm_device *, pm_message_t);
+	int			(*resume)(struct lm_device *);
+};
+
+int lm_driver_register(struct lm_driver *drv);
+void lm_driver_unregister(struct lm_driver *drv);
+
+int lm_device_register(struct lm_device *dev);
+
+#define lm_get_drvdata(lm)	dev_get_drvdata(&(lm)->dev)
+#define lm_set_drvdata(lm,d)	dev_set_drvdata(&(lm)->dev, d)
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
new file mode 100644
index 00000000000..be7e63c21d2
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define BUS_OFFSET	UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
+#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
new file mode 100644
index 00000000000..028b87839c0
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -0,0 +1,467 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/**************************************************************************
+ * * Copyright © ARM Limited 1998.  All rights reserved.
+ * ***********************************************************************/
+/* ************************************************************************
+ *
+ *   Integrator address map
+ *
+ * 	NOTE: This is a multi-hosted header file for use with uHAL and
+ * 	      supported debuggers.
+ *
+ * ***********************************************************************/
+
+#ifndef __address_h
+#define __address_h                     1
+
+/* ========================================================================
+ *  Integrator definitions
+ * ========================================================================
+ * ------------------------------------------------------------------------
+ *  Memory definitions
+ * ------------------------------------------------------------------------
+ *  Integrator memory map
+ *
+ */
+#define INTEGRATOR_BOOT_ROM_LO          0x00000000
+#define INTEGRATOR_BOOT_ROM_HI          0x20000000
+#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
+#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
+
+/*
+ *  New Core Modules have different amounts of SSRAM, the amount of SSRAM
+ *  fitted can be found in HDR_STAT.
+ *
+ *  The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
+ *  the minimum amount of SSRAM fitted on any core module.
+ *
+ *  New Core Modules also alias the SSRAM.
+ *
+ */
+#define INTEGRATOR_SSRAM_BASE           0x00000000
+#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
+#define INTEGRATOR_SSRAM_SIZE           SZ_256K
+
+#define INTEGRATOR_FLASH_BASE           0x24000000
+#define INTEGRATOR_FLASH_SIZE           SZ_32M
+
+#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
+#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
+
+/*
+ *  SDRAM is a SIMM therefore the size is not known.
+ *
+ */
+#define INTEGRATOR_SDRAM_BASE           0x00040000
+
+#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
+#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
+#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
+#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
+#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
+
+/*
+ *  Logic expansion modules
+ *
+ */
+#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
+#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
+#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
+
+/* ------------------------------------------------------------------------
+ *  Integrator header card registers
+ * ------------------------------------------------------------------------
+ *
+ */
+#define INTEGRATOR_HDR_ID_OFFSET        0x00
+#define INTEGRATOR_HDR_PROC_OFFSET      0x04
+#define INTEGRATOR_HDR_OSC_OFFSET       0x08
+#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
+#define INTEGRATOR_HDR_STAT_OFFSET      0x10
+#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
+#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
+#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
+#define INTEGRATOR_HDR_IC_OFFSET        0x40
+#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
+#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
+
+#define INTEGRATOR_HDR_BASE             0x10000000
+#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
+#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
+#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
+#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
+#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
+#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
+#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
+#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
+#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
+#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
+#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
+
+#define INTEGRATOR_HDR_CTRL_LED         0x01
+#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
+#define INTEGRATOR_HDR_CTRL_REMAP       0x04
+#define INTEGRATOR_HDR_CTRL_RESET       0x08
+#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
+#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
+#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
+#define INTEGRATOR_HDR_CTRL_SYNC        0x80
+
+#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
+#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
+#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
+#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
+#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
+#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
+#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
+#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
+#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
+#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
+#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
+#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
+#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
+#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
+#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
+#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
+#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
+#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
+#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
+#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
+#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
+#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
+#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
+#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
+#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
+#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
+#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
+#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
+#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
+#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
+#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
+#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
+
+#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
+#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
+#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
+#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
+#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
+#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
+#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
+#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
+#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
+#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
+#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
+
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
+
+#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
+
+
+/* ------------------------------------------------------------------------
+ *  Integrator system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ *  System Controller
+ *
+ */
+#define INTEGRATOR_SC_ID_OFFSET         0x00
+#define INTEGRATOR_SC_OSC_OFFSET        0x04
+#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
+#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
+#define INTEGRATOR_SC_DEC_OFFSET        0x10
+#define INTEGRATOR_SC_ARB_OFFSET        0x14
+#define INTEGRATOR_SC_PCIENABLE_OFFSET  0x18
+#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
+
+#define INTEGRATOR_SC_BASE              0x11000000
+#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
+#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
+#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
+#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
+#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
+#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
+#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
+#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
+
+#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
+#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
+#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
+#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
+#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
+#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
+
+#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
+#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
+#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
+
+#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
+#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
+#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
+#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
+#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
+#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
+#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
+
+/*
+ *  External Bus Interface
+ *
+ */
+#define INTEGRATOR_EBI_BASE             0x12000000
+
+#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
+#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
+#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
+#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
+#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
+
+#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
+#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
+#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
+#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
+#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
+
+#define INTEGRATOR_EBI_8_BIT            0x00
+#define INTEGRATOR_EBI_16_BIT           0x01
+#define INTEGRATOR_EBI_32_BIT           0x02
+#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
+#define INTEGRATOR_EBI_SYNC             0x08
+#define INTEGRATOR_EBI_WS_2             0x00
+#define INTEGRATOR_EBI_WS_3             0x10
+#define INTEGRATOR_EBI_WS_4             0x20
+#define INTEGRATOR_EBI_WS_5             0x30
+#define INTEGRATOR_EBI_WS_6             0x40
+#define INTEGRATOR_EBI_WS_7             0x50
+#define INTEGRATOR_EBI_WS_8             0x60
+#define INTEGRATOR_EBI_WS_9             0x70
+#define INTEGRATOR_EBI_WS_10            0x80
+#define INTEGRATOR_EBI_WS_11            0x90
+#define INTEGRATOR_EBI_WS_12            0xA0
+#define INTEGRATOR_EBI_WS_13            0xB0
+#define INTEGRATOR_EBI_WS_14            0xC0
+#define INTEGRATOR_EBI_WS_15            0xD0
+#define INTEGRATOR_EBI_WS_16            0xE0
+#define INTEGRATOR_EBI_WS_17            0xF0
+
+
+#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
+#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
+#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
+#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
+#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
+#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
+#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
+
+/*
+ *  LED's & Switches
+ *
+ */
+#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
+#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
+#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
+
+#define INTEGRATOR_DBG_BASE             0x1A000000
+#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
+#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
+#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
+
+
+#if defined(CONFIG_ARCH_INTEGRATOR_AP)
+#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
+#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
+#define INTEGRATOR_GPIO_BASE            0xC9000000	 /*  GPIO */
+#endif
+
+/* ------------------------------------------------------------------------
+ *  KMI keyboard/mouse definitions
+ * ------------------------------------------------------------------------
+ */
+/* PS2 Keyboard interface */
+#define KMI0_BASE                       INTEGRATOR_KBD_BASE
+
+/* PS2 Mouse interface */
+#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
+
+/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
+
+/* ------------------------------------------------------------------------
+ *  Where in the memory map does PCI live?
+ * ------------------------------------------------------------------------
+ *  This represents a fairly liberal usage of address space.  Even though
+ *  the V3 only has two windows (therefore we need to map stuff on the fly),
+ *  we maintain the same addresses, even if they're not mapped.
+ *
+ */
+#define PHYS_PCI_MEM_BASE               0x40000000   /* 512M to xxx */
+/*  unused 256M from A0000000-AFFFFFFF might be used for I2O ???
+ */
+#define PHYS_PCI_IO_BASE                0x60000000   /* 16M to xxx */
+/*  unused (128-16)M from B1000000-B7FFFFFF
+ */
+#define PHYS_PCI_CONFIG_BASE            0x61000000   /* 16M to xxx */
+/*  unused ((128-16)M - 64K) from XXX
+ */
+#define PHYS_PCI_V3_BASE                0x62000000
+
+#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
+
+/* 'export' these to UHAL */
+#define UHAL_PCI_IO                     PCI_IO_BASE
+#define UHAL_PCI_MEM                    PCI_MEM_BASE
+#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
+#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
+#define UHAL_PCI_MAX_SLOT               20
+
+/* ========================================================================
+ *  Start of uHAL definitions
+ * ========================================================================
+ */
+
+/* ------------------------------------------------------------------------
+ *  Integrator Interrupt Controllers
+ * ------------------------------------------------------------------------
+ *
+ *  Offsets from interrupt controller base
+ *
+ *  System Controller interrupt controller base is
+ *
+ * 	INTEGRATOR_IC_BASE + (header_number << 6)
+ *
+ *  Core Module interrupt controller base is
+ *
+ * 	INTEGRATOR_HDR_IC
+ *
+ */
+#define IRQ_STATUS                      0
+#define IRQ_RAW_STATUS                  0x04
+#define IRQ_ENABLE                      0x08
+#define IRQ_ENABLE_SET                  0x08
+#define IRQ_ENABLE_CLEAR                0x0C
+
+#define INT_SOFT_SET                    0x10
+#define INT_SOFT_CLEAR                  0x14
+
+#define FIQ_STATUS                      0x20
+#define FIQ_RAW_STATUS                  0x24
+#define FIQ_ENABLE                      0x28
+#define FIQ_ENABLE_SET                  0x28
+#define FIQ_ENABLE_CLEAR                0x2C
+
+
+/* ------------------------------------------------------------------------
+ *  Interrupts
+ * ------------------------------------------------------------------------
+ *
+ *
+ *  Each Core Module has two interrupts controllers, one on the core module
+ *  itself and one in the system controller on the motherboard.  The
+ *  READ_INT macro in target.s reads both interrupt controllers and returns
+ *  a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
+ *  and bits 24 to 31 are from the core module.
+ *
+ *  The following definitions relate to the bitmask returned by READ_INT.
+ *
+ */
+
+/* ------------------------------------------------------------------------
+ *  LED's - The header LED is not accessible via the uHAL API
+ * ------------------------------------------------------------------------
+ *
+ */
+#define GREEN_LED                       0x01
+#define YELLOW_LED                      0x02
+#define RED_LED                         0x04
+#define GREEN_LED_2                     0x08
+#define ALL_LEDS                        0x0F
+
+#define LED_BANK                        INTEGRATOR_DBG_LEDS
+
+/*
+ *  Memory definitions - run uHAL out of SSRAM.
+ *
+ */
+#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
+
+/*
+ *  Application Flash
+ *
+ */
+#define FLASH_BASE                      INTEGRATOR_FLASH_BASE
+#define FLASH_SIZE                      INTEGRATOR_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/*
+ *  Boot Flash
+ *
+ */
+#define EPROM_BASE                      INTEGRATOR_BOOT_ROM_HI
+#define EPROM_SIZE                      INTEGRATOR_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/*
+ *  Clean base - dummy
+ *
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ *  Timer definitions
+ *
+ *  Only use timer 1 & 2
+ *  (both run at 24MHz and will need the clock divider set to 16).
+ *
+ *  Timer 0 runs at bus frequency and therefore could vary and currently
+ *  uHAL can't handle that.
+ *
+ */
+
+#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
+#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
+#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  24
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define INTEGRATOR_CSR_BASE             0x10000000
+#define INTEGRATOR_CSR_SIZE             0x10000000
+
+#endif
+
+/* 	END */
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
new file mode 100644
index 00000000000..c485345c8c7
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -0,0 +1,44 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/cm.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h
new file mode 100644
index 00000000000..1dcb42028c8
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/timex.h
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * ??
+ */
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
new file mode 100644
index 00000000000..30452f00a16
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
+#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
+#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
new file mode 100644
index 00000000000..e87ab0b37bd
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index df37e93c6fc..6e472b5f8f2 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -28,14 +28,14 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 913f64b2240..6b99e9c258b 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,15 +20,15 @@
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
 
-#include <asm/arch/cm.h>
-#include <asm/arch/lm.h>
+#include <mach/cm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index f1436e683b4..7bc6881434e 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -25,12 +25,12 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 
 static int saved_leds;
 
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index 622cdc4212d..f52c7af31ea 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -12,7 +12,7 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #define to_lm_device(d)	container_of(d, struct lm_device, dev)
 #define to_lm_driver(d)	container_of(d, struct lm_driver, drv)
@@ -81,8 +81,10 @@ int lm_device_register(struct lm_device *dev)
 	dev->dev.release = lm_device_release;
 	dev->dev.bus = &lm_bustype;
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "lm%d", dev->id);
-	dev->resource.name = dev->dev.bus_id;
+	ret = dev_set_name(&dev->dev, "lm%d", dev->id);
+	if (ret)
+		return ret;
+	dev->resource.name = dev_name(&dev->dev);
 
 	ret = request_resource(&iomem_resource, &dev->resource);
 	if (ret == 0) {
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index c07f497000c..9f2b1ea8fb2 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -28,7 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
new file mode 100644
index 00000000000..60019c8e646
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -0,0 +1,537 @@
+/*
+ * Copyright(c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _ADMA_H
+#define _ADMA_H
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop_adma.h>
+
+#define ADMA_ACCR(chan)	(chan->mmr_base + 0x0)
+#define ADMA_ACSR(chan)	(chan->mmr_base + 0x4)
+#define ADMA_ADAR(chan)	(chan->mmr_base + 0x8)
+#define ADMA_IIPCR(chan)	(chan->mmr_base + 0x18)
+#define ADMA_IIPAR(chan)	(chan->mmr_base + 0x1c)
+#define ADMA_IIPUAR(chan)	(chan->mmr_base + 0x20)
+#define ADMA_ANDAR(chan)	(chan->mmr_base + 0x24)
+#define ADMA_ADCR(chan)	(chan->mmr_base + 0x28)
+#define ADMA_CARMD(chan)	(chan->mmr_base + 0x2c)
+#define ADMA_ABCR(chan)	(chan->mmr_base + 0x30)
+#define ADMA_DLADR(chan)	(chan->mmr_base + 0x34)
+#define ADMA_DUADR(chan)	(chan->mmr_base + 0x38)
+#define ADMA_SLAR(src, chan)	(chan->mmr_base + (0x3c + (src << 3)))
+#define ADMA_SUAR(src, chan)	(chan->mmr_base + (0x40 + (src << 3)))
+
+struct iop13xx_adma_src {
+	u32 src_addr;
+	union {
+		u32 upper_src_addr;
+		struct {
+			unsigned int pq_upper_src_addr:24;
+			unsigned int pq_dmlt:8;
+		};
+	};
+};
+
+struct iop13xx_adma_desc_ctrl {
+	unsigned int int_en:1;
+	unsigned int xfer_dir:2;
+	unsigned int src_select:4;
+	unsigned int zero_result:1;
+	unsigned int block_fill_en:1;
+	unsigned int crc_gen_en:1;
+	unsigned int crc_xfer_dis:1;
+	unsigned int crc_seed_fetch_dis:1;
+	unsigned int status_write_back_en:1;
+	unsigned int endian_swap_en:1;
+	unsigned int reserved0:2;
+	unsigned int pq_update_xfer_en:1;
+	unsigned int dual_xor_en:1;
+	unsigned int pq_xfer_en:1;
+	unsigned int p_xfer_dis:1;
+	unsigned int reserved1:10;
+	unsigned int relax_order_en:1;
+	unsigned int no_snoop_en:1;
+};
+
+struct iop13xx_adma_byte_count {
+	unsigned int byte_count:24;
+	unsigned int host_if:3;
+	unsigned int reserved:2;
+	unsigned int zero_result_err_q:1;
+	unsigned int zero_result_err:1;
+	unsigned int tx_complete:1;
+};
+
+struct iop13xx_adma_desc_hw {
+	u32 next_desc;
+	union {
+		u32 desc_ctrl;
+		struct iop13xx_adma_desc_ctrl desc_ctrl_field;
+	};
+	union {
+		u32 crc_addr;
+		u32 block_fill_data;
+		u32 q_dest_addr;
+	};
+	union {
+		u32 byte_count;
+		struct iop13xx_adma_byte_count byte_count_field;
+	};
+	union {
+		u32 dest_addr;
+		u32 p_dest_addr;
+	};
+	union {
+		u32 upper_dest_addr;
+		u32 pq_upper_dest_addr;
+	};
+	struct iop13xx_adma_src src[1];
+};
+
+struct iop13xx_adma_desc_dual_xor {
+	u32 next_desc;
+	u32 desc_ctrl;
+	u32 reserved;
+	u32 byte_count;
+	u32 h_dest_addr;
+	u32 h_upper_dest_addr;
+	u32 src0_addr;
+	u32 upper_src0_addr;
+	u32 src1_addr;
+	u32 upper_src1_addr;
+	u32 h_src_addr;
+	u32 h_upper_src_addr;
+	u32 d_src_addr;
+	u32 d_upper_src_addr;
+	u32 d_dest_addr;
+	u32 d_upper_dest_addr;
+};
+
+struct iop13xx_adma_desc_pq_update {
+	u32 next_desc;
+	u32 desc_ctrl;
+	u32 reserved;
+	u32 byte_count;
+	u32 p_dest_addr;
+	u32 p_upper_dest_addr;
+	u32 src0_addr;
+	u32 upper_src0_addr;
+	u32 src1_addr;
+	u32 upper_src1_addr;
+	u32 p_src_addr;
+	u32 p_upper_src_addr;
+	u32 q_src_addr;
+	struct {
+		unsigned int q_upper_src_addr:24;
+		unsigned int q_dmlt:8;
+	};
+	u32 q_dest_addr;
+	u32 q_upper_dest_addr;
+};
+
+static inline int iop_adma_get_max_xor(void)
+{
+	return 16;
+}
+
+static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
+{
+	return __raw_readl(ADMA_ADAR(chan));
+}
+
+static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
+						u32 next_desc_addr)
+{
+	__raw_writel(next_desc_addr, ADMA_ANDAR(chan));
+}
+
+#define ADMA_STATUS_BUSY (1 << 13)
+
+static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
+{
+	if (__raw_readl(ADMA_ACSR(chan)) &
+		ADMA_STATUS_BUSY)
+		return 1;
+	else
+		return 0;
+}
+
+static inline int
+iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
+{
+	return 1;
+}
+#define iop_desc_is_aligned(x, y) 1
+
+static inline int
+iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
+
+static inline int
+iop_chan_memset_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+static inline int
+iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	static const char slot_count_table[] = { 1, 2, 2, 2,
+						 2, 3, 3, 3,
+						 3, 4, 4, 4,
+						 4, 5, 5, 5,
+						};
+	*slots_per_op = slot_count_table[src_cnt - 1];
+	return *slots_per_op;
+}
+
+#define ADMA_MAX_BYTE_COUNT	(16 * 1024 * 1024)
+#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
+
+static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->dest_addr;
+}
+
+static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->byte_count_field.byte_count;
+}
+
+static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					int src_idx)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->src[src_idx].src_addr;
+}
+
+static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->desc_ctrl_field.src_select + 1;
+}
+
+static inline void
+iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+}
+
+static inline void
+iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.block_fill_en = 1;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+}
+
+/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
+static inline void
+iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+
+}
+#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
+
+/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
+static inline int
+iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+		       unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.zero_result = 1;
+	u_desc_ctrl.field.status_write_back_en = 1;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+
+	return 1;
+}
+
+static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					u32 byte_count)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->byte_count = byte_count;
+}
+
+static inline void
+iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+	int slots_per_op = desc->slots_per_op;
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+	int i = 0;
+
+	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		hw_desc->byte_count = len;
+	} else {
+		do {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			i += slots_per_op;
+		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
+
+		if (len) {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = len;
+		}
+	}
+}
+
+
+static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					dma_addr_t addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->dest_addr = addr;
+	hw_desc->upper_dest_addr = 0;
+}
+
+static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
+					dma_addr_t addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->src[0].src_addr = addr;
+	hw_desc->src[0].upper_src_addr = 0;
+}
+
+static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
+					int src_idx, dma_addr_t addr)
+{
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+	int i = 0;
+
+	do {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iter->src[src_idx].src_addr = addr;
+		iter->src[src_idx].upper_src_addr = 0;
+		slot_cnt -= slots_per_op;
+		if (slot_cnt) {
+			i += slots_per_op;
+			addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
+		}
+	} while (slot_cnt);
+}
+
+static inline void
+iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
+	struct iop_adma_chan *chan)
+{
+	iop_desc_init_memcpy(desc, 1);
+	iop_desc_set_byte_count(desc, chan, 0);
+	iop_desc_set_dest_addr(desc, chan, 0);
+	iop_desc_set_memcpy_src_addr(desc, 0);
+}
+
+#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
+
+static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
+					u32 next_desc_addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	BUG_ON(hw_desc->next_desc);
+	hw_desc->next_desc = next_desc_addr;
+}
+
+static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->next_desc;
+}
+
+static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->next_desc = 0;
+}
+
+static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
+						u32 val)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->block_fill_data = val;
+}
+
+static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
+	struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
+
+	BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
+
+	if (desc_ctrl.pq_xfer_en)
+		return byte_count.zero_result_err_q;
+	else
+		return byte_count.zero_result_err;
+}
+
+static inline void iop_chan_append(struct iop_adma_chan *chan)
+{
+	u32 adma_accr;
+
+	adma_accr = __raw_readl(ADMA_ACCR(chan));
+	adma_accr |= 0x2;
+	__raw_writel(adma_accr, ADMA_ACCR(chan));
+}
+
+static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
+{
+	return __raw_readl(ADMA_ACSR(chan));
+}
+
+static inline void iop_chan_disable(struct iop_adma_chan *chan)
+{
+	u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
+	adma_chan_ctrl &= ~0x1;
+	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
+}
+
+static inline void iop_chan_enable(struct iop_adma_chan *chan)
+{
+	u32 adma_chan_ctrl;
+
+	adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
+	adma_chan_ctrl |= 0x1;
+	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
+}
+
+static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 12);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 11);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline int
+iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(9, &status);
+}
+
+static inline int
+iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(5, &status);
+}
+
+static inline int
+iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(4, &status);
+}
+
+static inline int
+iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(3, &status);
+}
+
+static inline int
+iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+#endif /* _ADMA_H */
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..9037d2e8557
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+	.macro	addruart, rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ mmu enabled?
+	moveq	\rx, #0xff000000	@ physical
+	orreq	\rx, \rx, #0x00d80000
+	movne	\rx, #0xfe000000	@ virtual
+	orrne	\rx, \rx, #0x00e80000
+	orr	\rx, \rx, #0x00002300
+	orr	\rx, \rx, #0x00000040
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop13xx/include/mach/dma.h b/arch/arm/mach-iop13xx/include/mach/dma.h
new file mode 100644
index 00000000000..d79846fbb39
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+#ifndef _IOP13XX_DMA_H
+#define _IOP13XX_DMA_H
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..a624a7870c6
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
@@ -0,0 +1,45 @@
+/*
+ * iop13xx low level irq macros
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+	.macro  disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	.endm
+
+	/*
+	 * Note: a 1-cycle window exists where iintvec will return the value
+	 * of iintbase, so we explicitly check for "bad zeros"
+	 */
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc	p6, 0, \irqnr, c3, c2, 0  	@ Read IINTVEC
+	cmp	\irqnr, #0
+	mrceq	p6, 0, \irqnr, c3, c2, 0  	@ Re-read on potentially bad zero
+	adds	\irqstat, \irqnr, #1	  	@ Check for 0xffffffff
+	movne	\irqnr, \irqnr, lsr #2	  	@ Convert to irqnr
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop13xx/include/mach/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h
new file mode 100644
index 00000000000..8e1d5628984
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/hardware.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+#include <asm/types.h>
+
+#define pcibios_assign_all_busses() 1
+
+#ifndef __ASSEMBLY__
+extern unsigned long iop13xx_pcibios_min_io;
+extern unsigned long iop13xx_pcibios_min_mem;
+extern u16 iop13xx_dev_id(void);
+extern void iop13xx_set_atu_mmr_bases(void);
+#endif
+
+#define PCIBIOS_MIN_IO      (iop13xx_pcibios_min_io)
+#define PCIBIOS_MIN_MEM     (iop13xx_pcibios_min_mem)
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop13xx.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq81340.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
new file mode 100644
index 00000000000..a6e0f9e6ddc
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/io.h
@@ -0,0 +1,41 @@
+/*
+ * iop13xx custom ioremap implementation
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __iop13xx_io(a)
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (a)
+
+extern void __iomem * __iop13xx_io(unsigned long io_addr);
+extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop13xx_iounmap(void __iomem *addr);
+
+extern u32 iop13xx_atue_mem_base;
+extern u32 iop13xx_atux_mem_base;
+extern size_t iop13xx_atue_mem_size;
+extern size_t iop13xx_atux_mem_size;
+
+#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop13xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
new file mode 100644
index 00000000000..52b7fab7ef6
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
@@ -0,0 +1,526 @@
+#ifndef _IOP13XX_HW_H_
+#define _IOP13XX_HW_H_
+
+#ifndef __ASSEMBLY__
+/* The ATU offsets can change based on the strapping */
+extern u32 iop13xx_atux_pmmr_offset;
+extern u32 iop13xx_atue_pmmr_offset;
+void iop13xx_init_irq(void);
+void iop13xx_map_io(void);
+void iop13xx_platform_init(void);
+void iop13xx_add_tpmi_devices(void);
+void iop13xx_init_irq(void);
+
+/* CPUID CP6 R0 Page 0 */
+static inline int iop13xx_cpu_id(void)
+{
+	int id;
+	asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id));
+	return id;
+}
+
+/* WDTCR CP6 R7 Page 9 */
+static inline u32 read_wdtcr(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val));
+	return val;
+}
+static inline void write_wdtcr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val));
+}
+
+/* WDTSR CP6 R8 Page 9 */
+static inline u32 read_wdtsr(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val));
+	return val;
+}
+static inline void write_wdtsr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val));
+}
+
+/* RCSR - Reset Cause Status Register  */
+static inline u32 read_rcsr(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val));
+	return val;
+}
+
+extern unsigned long get_iop_tick_rate(void);
+#endif
+
+/*
+ * IOP13XX I/O and Mem space regions for PCI autoconfiguration
+ */
+#define IOP13XX_MAX_RAM_SIZE    0x80000000UL  /* 2GB */
+#define IOP13XX_PCI_OFFSET	 IOP13XX_MAX_RAM_SIZE
+
+/* PCI MAP
+ * bus range		cpu phys	cpu virt	note
+ * 0x0000.0000 + 2GB	(n/a)		(n/a)		inbound, 1:1 mapping with Physical RAM
+ * 0x8000.0000 + 928M	0x1.8000.0000   (ioremap)	PCIX outbound memory window
+ * 0x8000.0000 + 928M	0x2.8000.0000   (ioremap)	PCIE outbound memory window
+ *
+ * IO MAP
+ * 0x1000 + 64K	0x0.fffb.1000	0xfec6.1000	PCIX outbound i/o window
+ * 0x1000 + 64K	0x0.fffd.1000	0xfed7.1000	PCIE outbound i/o window
+ */
+#define IOP13XX_PCIX_IO_WINDOW_SIZE   0x10000UL
+#define IOP13XX_PCIX_LOWER_IO_PA      0xfffb0000UL
+#define IOP13XX_PCIX_LOWER_IO_VA      0xfec60000UL
+#define IOP13XX_PCIX_LOWER_IO_BA      0x0UL /* OIOTVR */
+#define IOP13XX_PCIX_IO_BUS_OFFSET    0x1000UL
+#define IOP13XX_PCIX_UPPER_IO_PA      (IOP13XX_PCIX_LOWER_IO_PA +\
+				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_UPPER_IO_VA      (IOP13XX_PCIX_LOWER_IO_VA +\
+				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+					   (IOP13XX_PCIX_LOWER_IO_PA\
+					   - IOP13XX_PCIX_LOWER_IO_VA))
+
+#define IOP13XX_PCIX_MEM_PHYS_OFFSET  0x100000000ULL
+#define IOP13XX_PCIX_MEM_WINDOW_SIZE  0x3a000000UL
+#define IOP13XX_PCIX_LOWER_MEM_BA     (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
+#define IOP13XX_PCIX_LOWER_MEM_PA     (IOP13XX_PCIX_MEM_PHYS_OFFSET +\
+				       IOP13XX_PCIX_LOWER_MEM_BA)
+#define IOP13XX_PCIX_UPPER_MEM_PA     (IOP13XX_PCIX_LOWER_MEM_PA +\
+				       IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_UPPER_MEM_BA     (IOP13XX_PCIX_LOWER_MEM_BA +\
+				       IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+
+#define IOP13XX_PCIX_MEM_COOKIE        0x80000000UL
+#define IOP13XX_PCIX_LOWER_MEM_RA      IOP13XX_PCIX_MEM_COOKIE
+#define IOP13XX_PCIX_UPPER_MEM_RA      (IOP13XX_PCIX_LOWER_MEM_RA +\
+					IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_MEM_OFFSET        (IOP13XX_PCIX_MEM_COOKIE -\
+					IOP13XX_PCIX_LOWER_MEM_BA)
+
+/* PCI-E ranges */
+#define IOP13XX_PCIE_IO_WINDOW_SIZE   	 0x10000UL
+#define IOP13XX_PCIE_LOWER_IO_PA      	 0xfffd0000UL
+#define IOP13XX_PCIE_LOWER_IO_VA      	 0xfed70000UL
+#define IOP13XX_PCIE_LOWER_IO_BA      	 0x0UL  /* OIOTVR */
+#define IOP13XX_PCIE_IO_BUS_OFFSET	 0x1000UL
+#define IOP13XX_PCIE_UPPER_IO_PA      	 (IOP13XX_PCIE_LOWER_IO_PA +\
+					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_IO_VA      	 (IOP13XX_PCIE_LOWER_IO_VA +\
+					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_IO_BA      	 (IOP13XX_PCIE_LOWER_IO_BA +\
+					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+					   (IOP13XX_PCIE_LOWER_IO_PA\
+					   - IOP13XX_PCIE_LOWER_IO_VA))
+
+#define IOP13XX_PCIE_MEM_PHYS_OFFSET  	 0x200000000ULL
+#define IOP13XX_PCIE_MEM_WINDOW_SIZE  	 0x3a000000UL
+#define IOP13XX_PCIE_LOWER_MEM_BA     	 (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
+#define IOP13XX_PCIE_LOWER_MEM_PA     	 (IOP13XX_PCIE_MEM_PHYS_OFFSET +\
+					 IOP13XX_PCIE_LOWER_MEM_BA)
+#define IOP13XX_PCIE_UPPER_MEM_PA     	 (IOP13XX_PCIE_LOWER_MEM_PA +\
+					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_MEM_BA     	 (IOP13XX_PCIE_LOWER_MEM_BA +\
+					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+
+/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */
+#define IOP13XX_PCIE_MEM_COOKIE       	 0xc0000000UL
+#define IOP13XX_PCIE_LOWER_MEM_RA     	 IOP13XX_PCIE_MEM_COOKIE
+#define IOP13XX_PCIE_UPPER_MEM_RA     	 (IOP13XX_PCIE_LOWER_MEM_RA +\
+					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_MEM_OFFSET       	 (IOP13XX_PCIE_MEM_COOKIE -\
+					 IOP13XX_PCIE_LOWER_MEM_BA)
+
+/* PBI Ranges */
+#define IOP13XX_PBI_LOWER_MEM_PA	  0xf0000000UL
+#define IOP13XX_PBI_MEM_WINDOW_SIZE	  0x04000000UL
+#define IOP13XX_PBI_MEM_COOKIE		  0xfa000000UL
+#define IOP13XX_PBI_LOWER_MEM_RA	  IOP13XX_PBI_MEM_COOKIE
+#define IOP13XX_PBI_UPPER_MEM_RA	  (IOP13XX_PBI_LOWER_MEM_RA +\
+					  IOP13XX_PBI_MEM_WINDOW_SIZE - 1)
+
+/*
+ * IOP13XX chipset registers
+ */
+#define IOP13XX_PMMR_PHYS_MEM_BASE	   0xffd80000UL  /* PMMR phys. address */
+#define IOP13XX_PMMR_VIRT_MEM_BASE	   0xfee80000UL  /* PMMR phys. address */
+#define IOP13XX_PMMR_MEM_WINDOW_SIZE	   0x80000
+#define IOP13XX_PMMR_UPPER_MEM_VA	   (IOP13XX_PMMR_VIRT_MEM_BASE +\
+					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PMMR_UPPER_MEM_PA	   (IOP13XX_PMMR_PHYS_MEM_BASE +\
+					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PMMR_VIRT_TO_PHYS(addr)   (u32) ((u32) addr +\
+					   (IOP13XX_PMMR_PHYS_MEM_BASE\
+					   - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_PMMR_PHYS_TO_VIRT(addr)   (u32) ((u32) addr -\
+					   (IOP13XX_PMMR_PHYS_MEM_BASE\
+					   - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_REG_ADDR32(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR16(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR8(reg)      	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR32_PHYS(reg)      (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR16_PHYS(reg)      (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR8_PHYS(reg)       (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_PMMR_SIZE		   0x00080000
+
+/*=================== Defines for Platform Devices =====================*/
+#define IOP13XX_UART0_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
+#define IOP13XX_UART1_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
+#define IOP13XX_UART0_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
+#define IOP13XX_UART1_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
+
+#define IOP13XX_I2C0_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
+#define IOP13XX_I2C1_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
+#define IOP13XX_I2C2_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540)
+#define IOP13XX_I2C0_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500)
+#define IOP13XX_I2C1_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520)
+#define IOP13XX_I2C2_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540)
+
+/* ATU selection flags */
+/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */
+#define IOP13XX_INIT_ATU_DEFAULT     (0)
+#define IOP13XX_INIT_ATU_ATUX	      (1 << 0)
+#define IOP13XX_INIT_ATU_ATUE	      (1 << 1)
+#define IOP13XX_INIT_ATU_NONE	      (1 << 2)
+
+/* UART selection flags */
+/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */
+#define IOP13XX_INIT_UART_DEFAULT    (0)
+#define IOP13XX_INIT_UART_0	      (1 << 0)
+#define IOP13XX_INIT_UART_1	      (1 << 1)
+
+/* I2C selection flags */
+/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */
+#define IOP13XX_INIT_I2C_DEFAULT     (0)
+#define IOP13XX_INIT_I2C_0	      (1 << 0)
+#define IOP13XX_INIT_I2C_1	      (1 << 1)
+#define IOP13XX_INIT_I2C_2	      (1 << 2)
+
+/* ADMA selection flags */
+/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */
+#define IOP13XX_INIT_ADMA_DEFAULT     (0)
+#define IOP13XX_INIT_ADMA_0           (1 << 0)
+#define IOP13XX_INIT_ADMA_1           (1 << 1)
+#define IOP13XX_INIT_ADMA_2           (1 << 2)
+
+/* Platform devices */
+#define IQ81340_NUM_UART     		2
+#define IQ81340_NUM_I2C      		3
+#define IQ81340_NUM_PHYS_MAP_FLASH	1
+#define IQ81340_NUM_ADMA     		3
+#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \
+				IQ81340_NUM_I2C + \
+				IQ81340_NUM_PHYS_MAP_FLASH + \
+				IQ81340_NUM_ADMA)
+
+/*========================== PMMR offsets for key registers ============*/
+#define IOP13XX_ATU0_PMMR_OFFSET   	0x00048000
+#define IOP13XX_ATU1_PMMR_OFFSET   	0x0004c000
+#define IOP13XX_ATU2_PMMR_OFFSET   	0x0004d000
+#define IOP13XX_ADMA0_PMMR_OFFSET  	0x00000000
+#define IOP13XX_ADMA1_PMMR_OFFSET  	0x00000200
+#define IOP13XX_ADMA2_PMMR_OFFSET  	0x00000400
+#define IOP13XX_PBI_PMMR_OFFSET    	0x00001580
+#define IOP13XX_MU_PMMR_OFFSET		0x00004000
+#define IOP13XX_ESSR0_PMMR_OFFSET  	0x00002188
+#define IOP13XX_ESSR0			IOP13XX_REG_ADDR32(0x00002188)
+
+#define IOP13XX_ESSR0_IFACE_MASK   	0x00004000  /* Interface PCI-X / PCI-E */
+#define IOP13XX_CONTROLLER_ONLY    	(1 << 14)
+#define IOP13XX_INTERFACE_SEL_PCIX 	(1 << 15)
+
+#define IOP13XX_PMON_PMMR_OFFSET	0x0001A000
+#define IOP13XX_PMON_BASE		(IOP13XX_PMMR_VIRT_MEM_BASE +\
+					IOP13XX_PMON_PMMR_OFFSET)
+#define IOP13XX_PMON_PHYSBASE		(IOP13XX_PMMR_PHYS_MEM_BASE +\
+					IOP13XX_PMON_PMMR_OFFSET)
+
+#define IOP13XX_PMON_CMD0		(IOP13XX_PMON_BASE + 0x0)
+#define IOP13XX_PMON_EVR0		(IOP13XX_PMON_BASE + 0x4)
+#define IOP13XX_PMON_STS0		(IOP13XX_PMON_BASE + 0x8)
+#define IOP13XX_PMON_DATA0		(IOP13XX_PMON_BASE + 0xC)
+
+#define IOP13XX_PMON_CMD3		(IOP13XX_PMON_BASE + 0x30)
+#define IOP13XX_PMON_EVR3		(IOP13XX_PMON_BASE + 0x34)
+#define IOP13XX_PMON_STS3		(IOP13XX_PMON_BASE + 0x38)
+#define IOP13XX_PMON_DATA3		(IOP13XX_PMON_BASE + 0x3C)
+
+#define IOP13XX_PMON_CMD7		(IOP13XX_PMON_BASE + 0x70)
+#define IOP13XX_PMON_EVR7		(IOP13XX_PMON_BASE + 0x74)
+#define IOP13XX_PMON_STS7		(IOP13XX_PMON_BASE + 0x78)
+#define IOP13XX_PMON_DATA7		(IOP13XX_PMON_BASE + 0x7C)
+
+#define IOP13XX_PMONEN			(IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040)
+#define IOP13XX_PMONSTAT		(IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044)
+
+/*================================ATU===================================*/
+#define IOP13XX_ATUX_OFFSET(ofs)	IOP13XX_REG_ADDR32(\
+					iop13xx_atux_pmmr_offset + (ofs))
+
+#define IOP13XX_ATUX_DID		IOP13XX_REG_ADDR16(\
+					iop13xx_atux_pmmr_offset + 0x2)
+
+#define IOP13XX_ATUX_ATUCMD		IOP13XX_REG_ADDR16(\
+					iop13xx_atux_pmmr_offset + 0x4)
+#define IOP13XX_ATUX_ATUSR		IOP13XX_REG_ADDR16(\
+					iop13xx_atux_pmmr_offset + 0x6)
+
+#define IOP13XX_ATUX_IABAR0   		IOP13XX_ATUX_OFFSET(0x10)
+#define IOP13XX_ATUX_IAUBAR0  		IOP13XX_ATUX_OFFSET(0x14)
+#define IOP13XX_ATUX_IABAR1   		IOP13XX_ATUX_OFFSET(0x18)
+#define IOP13XX_ATUX_IAUBAR1  		IOP13XX_ATUX_OFFSET(0x1c)
+#define IOP13XX_ATUX_IABAR2   		IOP13XX_ATUX_OFFSET(0x20)
+#define IOP13XX_ATUX_IAUBAR2  		IOP13XX_ATUX_OFFSET(0x24)
+#define IOP13XX_ATUX_IALR0    		IOP13XX_ATUX_OFFSET(0x40)
+#define IOP13XX_ATUX_IATVR0   		IOP13XX_ATUX_OFFSET(0x44)
+#define IOP13XX_ATUX_IAUTVR0  		IOP13XX_ATUX_OFFSET(0x48)
+#define IOP13XX_ATUX_IALR1    		IOP13XX_ATUX_OFFSET(0x4c)
+#define IOP13XX_ATUX_IATVR1   		IOP13XX_ATUX_OFFSET(0x50)
+#define IOP13XX_ATUX_IAUTVR1  		IOP13XX_ATUX_OFFSET(0x54)
+#define IOP13XX_ATUX_IALR2    		IOP13XX_ATUX_OFFSET(0x58)
+#define IOP13XX_ATUX_IATVR2   		IOP13XX_ATUX_OFFSET(0x5c)
+#define IOP13XX_ATUX_IAUTVR2  		IOP13XX_ATUX_OFFSET(0x60)
+#define IOP13XX_ATUX_ATUCR    		IOP13XX_ATUX_OFFSET(0x70)
+#define IOP13XX_ATUX_PCSR     		IOP13XX_ATUX_OFFSET(0x74)
+#define IOP13XX_ATUX_ATUISR   		IOP13XX_ATUX_OFFSET(0x78)
+#define IOP13XX_ATUX_PCIXSR   		IOP13XX_ATUX_OFFSET(0xD4)
+#define IOP13XX_ATUX_IABAR3   		IOP13XX_ATUX_OFFSET(0x200)
+#define IOP13XX_ATUX_IAUBAR3  		IOP13XX_ATUX_OFFSET(0x204)
+#define IOP13XX_ATUX_IALR3    		IOP13XX_ATUX_OFFSET(0x208)
+#define IOP13XX_ATUX_IATVR3   		IOP13XX_ATUX_OFFSET(0x20c)
+#define IOP13XX_ATUX_IAUTVR3  		IOP13XX_ATUX_OFFSET(0x210)
+
+#define IOP13XX_ATUX_OIOBAR   		IOP13XX_ATUX_OFFSET(0x300)
+#define IOP13XX_ATUX_OIOWTVR  		IOP13XX_ATUX_OFFSET(0x304)
+#define IOP13XX_ATUX_OUMBAR0  		IOP13XX_ATUX_OFFSET(0x308)
+#define IOP13XX_ATUX_OUMWTVR0 		IOP13XX_ATUX_OFFSET(0x30c)
+#define IOP13XX_ATUX_OUMBAR1  		IOP13XX_ATUX_OFFSET(0x310)
+#define IOP13XX_ATUX_OUMWTVR1 		IOP13XX_ATUX_OFFSET(0x314)
+#define IOP13XX_ATUX_OUMBAR2  		IOP13XX_ATUX_OFFSET(0x318)
+#define IOP13XX_ATUX_OUMWTVR2 		IOP13XX_ATUX_OFFSET(0x31c)
+#define IOP13XX_ATUX_OUMBAR3  		IOP13XX_ATUX_OFFSET(0x320)
+#define IOP13XX_ATUX_OUMWTVR3 		IOP13XX_ATUX_OFFSET(0x324)
+#define IOP13XX_ATUX_OUDMABAR 		IOP13XX_ATUX_OFFSET(0x328)
+#define IOP13XX_ATUX_OUMSIBAR 		IOP13XX_ATUX_OFFSET(0x32c)
+#define IOP13XX_ATUX_OCCAR    		IOP13XX_ATUX_OFFSET(0x330)
+#define IOP13XX_ATUX_OCCDR    		IOP13XX_ATUX_OFFSET(0x334)
+
+#define IOP13XX_ATUX_ATUCR_OUT_EN		(1 << 1)
+#define IOP13XX_ATUX_PCSR_CENTRAL_RES		(1 << 25)
+#define IOP13XX_ATUX_PCSR_P_RSTOUT		(1 << 21)
+#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY		(1 << 15)
+#define IOP13XX_ATUX_PCSR_IN_Q_BUSY		(1 << 14)
+#define IOP13XX_ATUX_PCSR_FREQ_OFFSET		(16)
+
+#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR	(1 << 18)
+#define IOP13XX_ATUX_STAT_VPD_ADDR		(1 << 17)
+#define IOP13XX_ATUX_STAT_INT_PAR_ERR		(1 << 16)
+#define IOP13XX_ATUX_STAT_CFG_WRITE		(1 << 15)
+#define IOP13XX_ATUX_STAT_ERR_COR		(1 << 14)
+#define IOP13XX_ATUX_STAT_TX_SCEM		(1 << 13)
+#define IOP13XX_ATUX_STAT_REC_SCEM		(1 << 12)
+#define IOP13XX_ATUX_STAT_POWER_TRAN	 	(1 << 11)
+#define IOP13XX_ATUX_STAT_TX_SERR		(1 << 10)
+#define IOP13XX_ATUX_STAT_DET_PAR_ERR	 	(1 << 9	)
+#define IOP13XX_ATUX_STAT_BIST			(1 << 8	)
+#define IOP13XX_ATUX_STAT_INT_REC_MABORT 	(1 << 7	)
+#define IOP13XX_ATUX_STAT_REC_SERR		(1 << 4	)
+#define IOP13XX_ATUX_STAT_EXT_REC_MABORT 	(1 << 3	)
+#define IOP13XX_ATUX_STAT_EXT_REC_TABORT 	(1 << 2	)
+#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT 	(1 << 1	)
+#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR	(1 << 0	)
+
+#define IOP13XX_ATUX_PCIXSR_BUS_NUM	(8)
+#define IOP13XX_ATUX_PCIXSR_DEV_NUM	(3)
+#define IOP13XX_ATUX_PCIXSR_FUNC_NUM	(0)
+
+#define IOP13XX_ATUX_IALR_DISABLE  	0x00000001
+#define IOP13XX_ATUX_OUMBAR_ENABLE 	0x80000000
+
+#define IOP13XX_ATUE_OFFSET(ofs)	IOP13XX_REG_ADDR32(\
+					iop13xx_atue_pmmr_offset + (ofs))
+
+#define IOP13XX_ATUE_DID		IOP13XX_REG_ADDR16(\
+					iop13xx_atue_pmmr_offset + 0x2)
+#define IOP13XX_ATUE_ATUCMD		IOP13XX_REG_ADDR16(\
+					iop13xx_atue_pmmr_offset + 0x4)
+#define IOP13XX_ATUE_ATUSR		IOP13XX_REG_ADDR16(\
+					iop13xx_atue_pmmr_offset + 0x6)
+
+#define IOP13XX_ATUE_IABAR0		IOP13XX_ATUE_OFFSET(0x10)
+#define IOP13XX_ATUE_IAUBAR0		IOP13XX_ATUE_OFFSET(0x14)
+#define IOP13XX_ATUE_IABAR1		IOP13XX_ATUE_OFFSET(0x18)
+#define IOP13XX_ATUE_IAUBAR1		IOP13XX_ATUE_OFFSET(0x1c)
+#define IOP13XX_ATUE_IABAR2		IOP13XX_ATUE_OFFSET(0x20)
+#define IOP13XX_ATUE_IAUBAR2		IOP13XX_ATUE_OFFSET(0x24)
+#define IOP13XX_ATUE_IALR0		IOP13XX_ATUE_OFFSET(0x40)
+#define IOP13XX_ATUE_IATVR0		IOP13XX_ATUE_OFFSET(0x44)
+#define IOP13XX_ATUE_IAUTVR0		IOP13XX_ATUE_OFFSET(0x48)
+#define IOP13XX_ATUE_IALR1		IOP13XX_ATUE_OFFSET(0x4c)
+#define IOP13XX_ATUE_IATVR1		IOP13XX_ATUE_OFFSET(0x50)
+#define IOP13XX_ATUE_IAUTVR1		IOP13XX_ATUE_OFFSET(0x54)
+#define IOP13XX_ATUE_IALR2		IOP13XX_ATUE_OFFSET(0x58)
+#define IOP13XX_ATUE_IATVR2		IOP13XX_ATUE_OFFSET(0x5c)
+#define IOP13XX_ATUE_IAUTVR2		IOP13XX_ATUE_OFFSET(0x60)
+#define IOP13XX_ATUE_PE_LSTS		IOP13XX_REG_ADDR16(\
+					iop13xx_atue_pmmr_offset + 0xe2)
+#define IOP13XX_ATUE_OIOWTVR		IOP13XX_ATUE_OFFSET(0x304)
+#define IOP13XX_ATUE_OUMBAR0		IOP13XX_ATUE_OFFSET(0x308)
+#define IOP13XX_ATUE_OUMWTVR0		IOP13XX_ATUE_OFFSET(0x30c)
+#define IOP13XX_ATUE_OUMBAR1		IOP13XX_ATUE_OFFSET(0x310)
+#define IOP13XX_ATUE_OUMWTVR1		IOP13XX_ATUE_OFFSET(0x314)
+#define IOP13XX_ATUE_OUMBAR2		IOP13XX_ATUE_OFFSET(0x318)
+#define IOP13XX_ATUE_OUMWTVR2		IOP13XX_ATUE_OFFSET(0x31c)
+#define IOP13XX_ATUE_OUMBAR3		IOP13XX_ATUE_OFFSET(0x320)
+#define IOP13XX_ATUE_OUMWTVR3		IOP13XX_ATUE_OFFSET(0x324)
+
+#define IOP13XX_ATUE_ATUCR		IOP13XX_ATUE_OFFSET(0x70)
+#define IOP13XX_ATUE_PCSR		IOP13XX_ATUE_OFFSET(0x74)
+#define IOP13XX_ATUE_ATUISR		IOP13XX_ATUE_OFFSET(0x78)
+#define IOP13XX_ATUE_OIOBAR		IOP13XX_ATUE_OFFSET(0x300)
+#define IOP13XX_ATUE_OCCAR		IOP13XX_ATUE_OFFSET(0x32c)
+#define IOP13XX_ATUE_OCCDR		IOP13XX_ATUE_OFFSET(0x330)
+
+#define IOP13XX_ATUE_PIE_STS		IOP13XX_ATUE_OFFSET(0x384)
+#define IOP13XX_ATUE_PIE_MSK		IOP13XX_ATUE_OFFSET(0x388)
+
+#define IOP13XX_ATUE_ATUCR_IVM		(1 << 6)
+#define IOP13XX_ATUE_ATUCR_OUT_EN	(1 << 1)
+#define IOP13XX_ATUE_OCCAR_BUS_NUM	(24)
+#define IOP13XX_ATUE_OCCAR_DEV_NUM	(19)
+#define IOP13XX_ATUE_OCCAR_FUNC_NUM	(16)
+#define IOP13XX_ATUE_OCCAR_EXT_REG	(8)
+#define IOP13XX_ATUE_OCCAR_REG		(2)
+
+#define IOP13XX_ATUE_PCSR_BUS_NUM	(24)
+#define IOP13XX_ATUE_PCSR_DEV_NUM	(19)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM	(16)
+#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY	(1 << 15)
+#define IOP13XX_ATUE_PCSR_IN_Q_BUSY	(1 << 14)
+#define IOP13XX_ATUE_PCSR_END_POINT	(1 << 13)
+#define IOP13XX_ATUE_PCSR_LLRB_BUSY	(1 << 12)
+
+#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK		(0xff)
+#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK		(0x1f)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK	(0x7)
+
+#define IOP13XX_ATUE_PCSR_CORE_RESET		(8)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM		(16)
+
+#define IOP13XX_ATUE_LSTS_TRAINING		(1 << 11)
+#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG		(1 << 28)
+#define IOP13XX_ATUE_STAT_PME			(1 << 27)
+#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG		(1 << 26)
+#define IOP13XX_ATUE_STAT_IVM			(1 << 25)
+#define IOP13XX_ATUE_STAT_BIST			(1 << 24)
+#define IOP13XX_ATUE_STAT_CFG_WRITE		(1 << 18)
+#define IOP13XX_ATUE_STAT_VPD_ADDR		(1 << 17)
+#define IOP13XX_ATUE_STAT_POWER_TRAN		(1 << 16)
+#define IOP13XX_ATUE_STAT_HALT_ON_ERROR	(1 << 13)
+#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR		(1 << 12)
+#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG		(1 << 11)
+#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR	(1 << 10)
+#define IOP13XX_ATUE_STAT_ERR_COR		(1 << 9	)
+#define IOP13XX_ATUE_STAT_ERR_UNCOR		(1 << 8	)
+#define IOP13XX_ATUE_STAT_CRS			(1 << 7	)
+#define IOP13XX_ATUE_STAT_LNK_DWN		(1 << 6	)
+#define IOP13XX_ATUE_STAT_INT_REC_MABORT	(1 << 5	)
+#define IOP13XX_ATUE_STAT_DET_PAR_ERR		(1 << 4	)
+#define IOP13XX_ATUE_STAT_EXT_REC_MABORT	(1 << 3	)
+#define IOP13XX_ATUE_STAT_SIG_TABORT		(1 << 2	)
+#define IOP13XX_ATUE_STAT_EXT_REC_TABORT	(1 << 1	)
+#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR	(1 << 0	)
+
+#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ	(1 << 31)
+#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT		(1 << 30)
+#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP		(1 << 29)
+#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR			(1 << 28)
+#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ		(1 << 20)
+#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR		(1 << 19)
+#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP		(1 << 18)
+#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW	(1 << 17)
+#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP		(1 << 16)
+#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT		(1 << 15)
+#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT		(1 << 14)
+#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR		(1 << 13)
+#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP		(1 << 12)
+#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR		(1 << 4	)
+#define IOP13XX_ATUE_ESTAT_TRAINING_ERR		(1 << 0	)
+
+#define IOP13XX_ATUE_IALR_DISABLE   		(0x00000001)
+#define IOP13XX_ATUE_OUMBAR_ENABLE  		(0x80000000)
+#define IOP13XX_ATU_OUMBAR_FUNC_NUM  		(28)
+#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK  	(0x7)
+/*=======================================================================*/
+
+/*============================MESSAGING UNIT=============================*/
+#define IOP13XX_MU_OFFSET(ofs)	IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
+							(ofs))
+
+#define IOP13XX_MU_IMR0	IOP13XX_MU_OFFSET(0x10)
+#define IOP13XX_MU_IMR1	IOP13XX_MU_OFFSET(0x14)
+#define IOP13XX_MU_OMR0	IOP13XX_MU_OFFSET(0x18)
+#define IOP13XX_MU_OMR1	IOP13XX_MU_OFFSET(0x1C)
+#define IOP13XX_MU_IDR	       	IOP13XX_MU_OFFSET(0x20)
+#define IOP13XX_MU_IISR	IOP13XX_MU_OFFSET(0x24)
+#define IOP13XX_MU_IIMR	IOP13XX_MU_OFFSET(0x28)
+#define IOP13XX_MU_ODR	       	IOP13XX_MU_OFFSET(0x2C)
+#define IOP13XX_MU_OISR	IOP13XX_MU_OFFSET(0x30)
+#define IOP13XX_MU_OIMR	IOP13XX_MU_OFFSET(0x34)
+#define IOP13XX_MU_IRCSR      	IOP13XX_MU_OFFSET(0x38)
+#define IOP13XX_MU_ORCSR      	IOP13XX_MU_OFFSET(0x3C)
+#define IOP13XX_MU_MIMR	IOP13XX_MU_OFFSET(0x48)
+#define IOP13XX_MU_MUCR	IOP13XX_MU_OFFSET(0x50)
+#define IOP13XX_MU_QBAR	IOP13XX_MU_OFFSET(0x54)
+#define IOP13XX_MU_MUBAR      	IOP13XX_MU_OFFSET(0x84)
+
+#define IOP13XX_MU_WINDOW_SIZE	(8 * 1024)
+#define IOP13XX_MU_BASE_PHYS	(0xff000000)
+#define IOP13XX_MU_BASE_PCI	(0xff000000)
+#define IOP13XX_MU_MIMR_PCI	(IOP13XX_MU_BASE_PCI + 0x48)
+#define IOP13XX_MU_MIMR_CORE_SELECT (15)
+/*=======================================================================*/
+
+/*==============================ADMA UNITS===============================*/
+#define IOP13XX_ADMA_PHYS_BASE(chan)	IOP13XX_REG_ADDR32_PHYS((chan << 9))
+#define IOP13XX_ADMA_UPPER_PA(chan)	(IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
+
+/*==============================XSI BRIDGE===============================*/
+#define IOP13XX_XBG_BECSR		IOP13XX_REG_ADDR32(0x178c)
+#define IOP13XX_XBG_BERAR		IOP13XX_REG_ADDR32(0x1790)
+#define IOP13XX_XBG_BERUAR		IOP13XX_REG_ADDR32(0x1794)
+#define is_atue_occdr_error(x) 	((__raw_readl(IOP13XX_XBG_BERAR) == \
+					IOP13XX_PMMR_VIRT_TO_PHYS(\
+					IOP13XX_ATUE_OCCDR))\
+					&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
+#define is_atux_occdr_error(x) 	((__raw_readl(IOP13XX_XBG_BERAR) == \
+					IOP13XX_PMMR_VIRT_TO_PHYS(\
+					IOP13XX_ATUX_OCCDR))\
+					&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
+/*=======================================================================*/
+
+#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\
+							(ofs))
+
+#define IOP13XX_PBI_CR	       		IOP13XX_PBI_OFFSET(0x0)
+#define IOP13XX_PBI_SR	       		IOP13XX_PBI_OFFSET(0x4)
+#define IOP13XX_PBI_BAR0      		IOP13XX_PBI_OFFSET(0x8)
+#define IOP13XX_PBI_LR0       		IOP13XX_PBI_OFFSET(0xc)
+#define IOP13XX_PBI_BAR1      		IOP13XX_PBI_OFFSET(0x10)
+#define IOP13XX_PBI_LR1       		IOP13XX_PBI_OFFSET(0x14)
+
+#define IOP13XX_PROCESSOR_FREQ		IOP13XX_REG_ADDR32(0x2180)
+
+/* Watchdog timer definitions */
+#define IOP_WDTCR_EN_ARM  	0x1e1e1e1e
+#define IOP_WDTCR_EN      	0xe1e1e1e1
+#define IOP_WDTCR_DIS_ARM 	0x1f1f1f1f
+#define IOP_WDTCR_DIS     	0xf1f1f1f1
+#define IOP_RCSR_WDT		(1 << 5) /* reset caused by watchdog timer */
+#define IOP13XX_WDTSR_WRITE_EN	(1 << 31) /* used to speed up reset requests */
+#define IOP13XX_WDTCR_IB_RESET	(1 << 0)
+
+#endif /* _IOP13XX_HW_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/iq81340.h b/arch/arm/mach-iop13xx/include/mach/iq81340.h
new file mode 100644
index 00000000000..ba2cf931e9c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/iq81340.h
@@ -0,0 +1,28 @@
+#ifndef _IQ81340_H_
+#define _IQ81340_H_
+
+#define IQ81340_PCE_BAR0    IOP13XX_PBI_LOWER_MEM_RA
+#define IQ81340_PCE_BAR1    (IQ81340_PCE_BAR0 + 0x02000000)
+
+#define IQ81340_FLASHBASE   IQ81340_PCE_BAR0	/* Flash */
+
+#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a))
+
+#define IQ81340_PRD_CODE    IQ81340_PCE_BAR1_OFFSET(0)
+#define IQ81340_BRD_STEP    IQ81340_PCE_BAR1_OFFSET(0x10000)
+#define IQ81340_CPLD_REV    IQ81340_PCE_BAR1_OFFSET(0x20000)
+#define IQ81340_LED	     IQ81340_PCE_BAR1_OFFSET(0x30000)
+#define IQ81340_LHEX	     IQ81340_PCE_BAR1_OFFSET(0x40000)
+#define IQ81340_RHEX	     IQ81340_PCE_BAR1_OFFSET(0x50000)
+#define IQ81340_BUZZER	     IQ81340_PCE_BAR1_OFFSET(0x60000)
+#define IQ81340_32K_NVRAM   IQ81340_PCE_BAR1_OFFSET(0x70000)
+#define IQ81340_256K_NVRAM  IQ81340_PCE_BAR1_OFFSET(0x80000)
+#define IQ81340_ROTARY_SW   IQ81340_PCE_BAR1_OFFSET(0xd0000)
+#define IQ81340_BATT_STAT   IQ81340_PCE_BAR1_OFFSET(0xf0000)
+#define IQ81340_CMP_FLSH    IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */
+
+#define PBI_CF_IDE_BASE     (IQ81340_CMP_FLSH)
+#define PBI_CF_BAR_ADDR     (IOP13XX_PBI_BAR1)
+
+
+#endif	/* _IQ81340_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h
new file mode 100644
index 00000000000..054e7acb5bf
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/irqs.h
@@ -0,0 +1,196 @@
+#ifndef _IOP13XX_IRQS_H_
+#define _IOP13XX_IRQS_H_
+
+#ifndef __ASSEMBLER__
+#include <linux/types.h>
+
+/* INTPND0 CP6 R0 Page 3
+ */
+static inline u32 read_intpnd_0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val));
+	return val;
+}
+
+/* INTPND1 CP6 R1 Page 3
+ */
+static inline u32 read_intpnd_1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val));
+	return val;
+}
+
+/* INTPND2 CP6 R2 Page 3
+ */
+static inline u32 read_intpnd_2(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val));
+	return val;
+}
+
+/* INTPND3 CP6 R3 Page 3
+ */
+static inline u32 read_intpnd_3(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val));
+	return val;
+}
+#endif
+
+#define INTBASE 0
+#define INTSIZE_4 1
+
+/*
+ * iop34x chipset interrupts
+ */
+#define IOP13XX_IRQ(x)		(IOP13XX_IRQ_OFS + (x))
+
+/*
+ * On IRQ or FIQ register
+ */
+#define IRQ_IOP13XX_ADMA0_EOT	(0)
+#define IRQ_IOP13XX_ADMA0_EOC	(1)
+#define IRQ_IOP13XX_ADMA1_EOT	(2)
+#define IRQ_IOP13XX_ADMA1_EOC	(3)
+#define IRQ_IOP13XX_ADMA2_EOT	(4)
+#define IRQ_IOP13XX_ADMA2_EOC	(5)
+#define IRQ_IOP134_WATCHDOG	(6)
+#define IRQ_IOP13XX_RSVD_7	(7)
+#define IRQ_IOP13XX_TIMER0	(8)
+#define IRQ_IOP13XX_TIMER1	(9)
+#define IRQ_IOP13XX_I2C_0	(10)
+#define IRQ_IOP13XX_I2C_1	(11)
+#define IRQ_IOP13XX_MSG	(12)
+#define IRQ_IOP13XX_MSGIBQ	(13)
+#define IRQ_IOP13XX_ATU_IM	(14)
+#define IRQ_IOP13XX_ATU_BIST	(15)
+#define IRQ_IOP13XX_PPMU	(16)
+#define IRQ_IOP13XX_COREPMU	(17)
+#define IRQ_IOP13XX_CORECACHE	(18)
+#define IRQ_IOP13XX_RSVD_19	(19)
+#define IRQ_IOP13XX_RSVD_20	(20)
+#define IRQ_IOP13XX_RSVD_21	(21)
+#define IRQ_IOP13XX_RSVD_22	(22)
+#define IRQ_IOP13XX_RSVD_23	(23)
+#define IRQ_IOP13XX_XINT0	(24)
+#define IRQ_IOP13XX_XINT1	(25)
+#define IRQ_IOP13XX_XINT2	(26)
+#define IRQ_IOP13XX_XINT3	(27)
+#define IRQ_IOP13XX_XINT4	(28)
+#define IRQ_IOP13XX_XINT5	(29)
+#define IRQ_IOP13XX_XINT6	(30)
+#define IRQ_IOP13XX_XINT7	(31)
+				      /* IINTSRC1 bit */
+#define IRQ_IOP13XX_XINT8	(32)  /* 0  */
+#define IRQ_IOP13XX_XINT9	(33)  /* 1  */
+#define IRQ_IOP13XX_XINT10	(34)  /* 2  */
+#define IRQ_IOP13XX_XINT11	(35)  /* 3  */
+#define IRQ_IOP13XX_XINT12	(36)  /* 4  */
+#define IRQ_IOP13XX_XINT13	(37)  /* 5  */
+#define IRQ_IOP13XX_XINT14	(38)  /* 6  */
+#define IRQ_IOP13XX_XINT15	(39)  /* 7  */
+#define IRQ_IOP13XX_RSVD_40	(40)  /* 8  */
+#define IRQ_IOP13XX_RSVD_41	(41)  /* 9  */
+#define IRQ_IOP13XX_RSVD_42	(42)  /* 10 */
+#define IRQ_IOP13XX_RSVD_43	(43)  /* 11 */
+#define IRQ_IOP13XX_RSVD_44	(44)  /* 12 */
+#define IRQ_IOP13XX_RSVD_45	(45)  /* 13 */
+#define IRQ_IOP13XX_RSVD_46	(46)  /* 14 */
+#define IRQ_IOP13XX_RSVD_47	(47)  /* 15 */
+#define IRQ_IOP13XX_RSVD_48	(48)  /* 16 */
+#define IRQ_IOP13XX_RSVD_49	(49)  /* 17 */
+#define IRQ_IOP13XX_RSVD_50	(50)  /* 18 */
+#define IRQ_IOP13XX_UART0	(51)  /* 19 */
+#define IRQ_IOP13XX_UART1	(52)  /* 20 */
+#define IRQ_IOP13XX_PBIE	(53)  /* 21 */
+#define IRQ_IOP13XX_ATU_CRW	(54)  /* 22 */
+#define IRQ_IOP13XX_ATU_ERR	(55)  /* 23 */
+#define IRQ_IOP13XX_MCU_ERR	(56)  /* 24 */
+#define IRQ_IOP13XX_ADMA0_ERR	(57)  /* 25 */
+#define IRQ_IOP13XX_ADMA1_ERR	(58)  /* 26 */
+#define IRQ_IOP13XX_ADMA2_ERR	(59)  /* 27 */
+#define IRQ_IOP13XX_RSVD_60	(60)  /* 28 */
+#define IRQ_IOP13XX_RSVD_61	(61)  /* 29 */
+#define IRQ_IOP13XX_MSG_ERR	(62)  /* 30 */
+#define IRQ_IOP13XX_RSVD_63	(63)  /* 31 */
+				      /* IINTSRC2 bit */
+#define IRQ_IOP13XX_INTERPROC	(64)  /* 0  */
+#define IRQ_IOP13XX_RSVD_65	(65)  /* 1  */
+#define IRQ_IOP13XX_RSVD_66	(66)  /* 2  */
+#define IRQ_IOP13XX_RSVD_67	(67)  /* 3  */
+#define IRQ_IOP13XX_RSVD_68	(68)  /* 4  */
+#define IRQ_IOP13XX_RSVD_69	(69)  /* 5  */
+#define IRQ_IOP13XX_RSVD_70	(70)  /* 6  */
+#define IRQ_IOP13XX_RSVD_71	(71)  /* 7  */
+#define IRQ_IOP13XX_RSVD_72	(72)  /* 8  */
+#define IRQ_IOP13XX_RSVD_73	(73)  /* 9  */
+#define IRQ_IOP13XX_RSVD_74	(74)  /* 10 */
+#define IRQ_IOP13XX_RSVD_75	(75)  /* 11 */
+#define IRQ_IOP13XX_RSVD_76	(76)  /* 12 */
+#define IRQ_IOP13XX_RSVD_77	(77)  /* 13 */
+#define IRQ_IOP13XX_RSVD_78	(78)  /* 14 */
+#define IRQ_IOP13XX_RSVD_79	(79)  /* 15 */
+#define IRQ_IOP13XX_RSVD_80	(80)  /* 16 */
+#define IRQ_IOP13XX_RSVD_81	(81)  /* 17 */
+#define IRQ_IOP13XX_RSVD_82	(82)  /* 18 */
+#define IRQ_IOP13XX_RSVD_83	(83)  /* 19 */
+#define IRQ_IOP13XX_RSVD_84	(84)  /* 20 */
+#define IRQ_IOP13XX_RSVD_85	(85)  /* 21 */
+#define IRQ_IOP13XX_RSVD_86	(86)  /* 22 */
+#define IRQ_IOP13XX_RSVD_87	(87)  /* 23 */
+#define IRQ_IOP13XX_RSVD_88	(88)  /* 24 */
+#define IRQ_IOP13XX_RSVD_89	(89)  /* 25 */
+#define IRQ_IOP13XX_RSVD_90	(90)  /* 26 */
+#define IRQ_IOP13XX_RSVD_91	(91)  /* 27 */
+#define IRQ_IOP13XX_RSVD_92	(92)  /* 28 */
+#define IRQ_IOP13XX_RSVD_93	(93)  /* 29 */
+#define IRQ_IOP13XX_SIB_ERR	(94)  /* 30 */
+#define IRQ_IOP13XX_SRAM_ERR	(95)  /* 31 */
+				      /* IINTSRC3 bit */
+#define IRQ_IOP13XX_I2C_2	(96)  /* 0  */
+#define IRQ_IOP13XX_ATUE_BIST	(97)  /* 1  */
+#define IRQ_IOP13XX_ATUE_CRW	(98)  /* 2  */
+#define IRQ_IOP13XX_ATUE_ERR	(99)  /* 3  */
+#define IRQ_IOP13XX_IMU	(100) /* 4  */
+#define IRQ_IOP13XX_RSVD_101	(101) /* 5  */
+#define IRQ_IOP13XX_RSVD_102	(102) /* 6  */
+#define IRQ_IOP13XX_TPMI0_OUT	(103) /* 7  */
+#define IRQ_IOP13XX_TPMI1_OUT	(104) /* 8  */
+#define IRQ_IOP13XX_TPMI2_OUT	(105) /* 9  */
+#define IRQ_IOP13XX_TPMI3_OUT	(106) /* 10 */
+#define IRQ_IOP13XX_ATUE_IMA	(107) /* 11 */
+#define IRQ_IOP13XX_ATUE_IMB	(108) /* 12 */
+#define IRQ_IOP13XX_ATUE_IMC	(109) /* 13 */
+#define IRQ_IOP13XX_ATUE_IMD	(110) /* 14 */
+#define IRQ_IOP13XX_MU_MSI_TB	(111) /* 15 */
+#define IRQ_IOP13XX_RSVD_112	(112) /* 16 */
+#define IRQ_IOP13XX_INBD_MSI	(113) /* 17 */
+#define IRQ_IOP13XX_RSVD_114	(114) /* 18 */
+#define IRQ_IOP13XX_RSVD_115	(115) /* 19 */
+#define IRQ_IOP13XX_RSVD_116	(116) /* 20 */
+#define IRQ_IOP13XX_RSVD_117	(117) /* 21 */
+#define IRQ_IOP13XX_RSVD_118	(118) /* 22 */
+#define IRQ_IOP13XX_RSVD_119	(119) /* 23 */
+#define IRQ_IOP13XX_RSVD_120	(120) /* 24 */
+#define IRQ_IOP13XX_RSVD_121	(121) /* 25 */
+#define IRQ_IOP13XX_RSVD_122	(122) /* 26 */
+#define IRQ_IOP13XX_RSVD_123	(123) /* 27 */
+#define IRQ_IOP13XX_RSVD_124	(124) /* 28 */
+#define IRQ_IOP13XX_RSVD_125	(125) /* 29 */
+#define IRQ_IOP13XX_RSVD_126	(126) /* 30 */
+#define IRQ_IOP13XX_HPI	(127) /* 31 */
+
+#ifdef CONFIG_PCI_MSI
+#define IRQ_IOP13XX_MSI_0	(IRQ_IOP13XX_HPI + 1)
+#define NR_IOP13XX_IRQS 	(IRQ_IOP13XX_MSI_0 + 128)
+#else
+#define NR_IOP13XX_IRQS	(IRQ_IOP13XX_HPI + 1)
+#endif
+
+#define NR_IRQS		NR_IOP13XX_IRQS
+
+#endif /* _IOP13XX_IRQ_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
new file mode 100644
index 00000000000..e8b59d8f1bb
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define TASK_SIZE  	UL(0x3f000000)
+#define PAGE_OFFSET	UL(0x40000000)
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_ARCH_IOP13XX)
+#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
+#define IOP13XX_PMMR_V_END   (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
+#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+
+/* RAM has 1:1 mapping on the PCIe/x Busses */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)    (__phys_to_virt(x))
+
+#define virt_to_lbus(x) 					   \
+(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) &&		   \
+((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? 			   \
+((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
+((x) - PAGE_OFFSET + PHYS_OFFSET))
+
+#define lbus_to_virt(x)                                            \
+(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
+((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
+((x) - PHYS_OFFSET + PAGE_OFFSET))
+
+/* Device is an lbus device if it is on the platform bus of the IOP13XX */
+#define is_lbus_device(dev) (dev &&\
+			     (strncmp(dev->bus->name, "platform", 8) == 0))
+
+#define __arch_page_to_dma(dev, page)					\
+({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
+(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr) \
+({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr) \
+({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
+
+#endif /* CONFIG_ARCH_IOP13XX */
+#endif /* !ASSEMBLY */
+
+#define PFN_TO_NID(addr)	(0)
+
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/msi.h b/arch/arm/mach-iop13xx/include/mach/msi.h
new file mode 100644
index 00000000000..b80c5ae17e9
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/msi.h
@@ -0,0 +1,11 @@
+#ifndef _IOP13XX_MSI_H_
+#define _IOP13XX_MSI_H_
+#ifdef CONFIG_PCI_MSI
+void iop13xx_msi_init(void);
+#else
+static inline void iop13xx_msi_init(void)
+{
+	return;
+}
+#endif
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
new file mode 100644
index 00000000000..17b5515af8b
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -0,0 +1,57 @@
+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
+			       PCI_STATUS_SIG_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_MASTER_ABORT | \
+			       PCI_STATUS_SIG_SYSTEM_ERROR | \
+	 		       PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
+				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
+				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
+				    IOP13XX_ATUE_STAT_ERR_COR |	       \
+				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
+				    IOP13XX_ATUE_STAT_CRS |	       \
+				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
+				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
+				    IOP13XX_ATUX_STAT_REC_SCEM |       \
+				    IOP13XX_ATUX_STAT_TX_SERR |	       \
+				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_REC_SERR |       \
+				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
new file mode 100644
index 00000000000..c7127f416e1
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/system.h
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/iop13xx.h>
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Reset the internal bus (warning both cores are reset)
+	 */
+	write_wdtcr(IOP_WDTCR_EN_ARM);
+	write_wdtcr(IOP_WDTCR_EN);
+	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+	write_wdtcr(0x1000);
+
+	for(;;);
+}
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
new file mode 100644
index 00000000000..49213d9d7ca
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -0,0 +1,107 @@
+#ifndef _IOP13XX_TIME_H_
+#define _IOP13XX_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0
+
+#define IOP_TMR_EN	    0x02
+#define IOP_TMR_RELOAD	    0x04
+#define IOP_TMR_PRIVILEGED 0x08
+#define IOP_TMR_RATIO_1_1  0x00
+
+#define IOP13XX_XSI_FREQ_RATIO_MASK	(3 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_2   	(0 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_3	(1 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_4	(2 << 19)
+#define IOP13XX_CORE_FREQ_MASK		(7 << 16)
+#define IOP13XX_CORE_FREQ_600		(0 << 16)
+#define IOP13XX_CORE_FREQ_667		(1 << 16)
+#define IOP13XX_CORE_FREQ_800		(2 << 16)
+#define IOP13XX_CORE_FREQ_933		(3 << 16)
+#define IOP13XX_CORE_FREQ_1000		(4 << 16)
+#define IOP13XX_CORE_FREQ_1200		(5 << 16)
+
+void iop_init_time(unsigned long tickrate);
+unsigned long iop_gettimeoffset(void);
+
+static inline unsigned long iop13xx_core_freq(void)
+{
+	unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ);
+	freq &= IOP13XX_CORE_FREQ_MASK;
+	switch (freq) {
+	case IOP13XX_CORE_FREQ_600:
+		return 600000000;
+	case IOP13XX_CORE_FREQ_667:
+		return 667000000;
+	case IOP13XX_CORE_FREQ_800:
+		return 800000000;
+	case IOP13XX_CORE_FREQ_933:
+		return 933000000;
+	case IOP13XX_CORE_FREQ_1000:
+		return 1000000000;
+	case IOP13XX_CORE_FREQ_1200:
+		return 1200000000;
+	default:
+		printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
+			__FUNCTION__);
+	}
+
+	return 800000000;
+}
+
+static inline unsigned long iop13xx_xsi_bus_ratio(void)
+{
+	unsigned long  ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ);
+	ratio &= IOP13XX_XSI_FREQ_RATIO_MASK;
+	switch (ratio) {
+	case IOP13XX_XSI_FREQ_RATIO_2:
+		return 2;
+	case IOP13XX_XSI_FREQ_RATIO_3:
+		return 3;
+	case IOP13XX_XSI_FREQ_RATIO_4:
+		return 4;
+	default:
+		printk("%s: warning unknown ratio, defaulting to 2\n",
+			__FUNCTION__);
+	}
+
+	return 2;
+}
+
+static inline void write_tmr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
+}
+
+static inline void write_tmr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (val));
+}
+
+static inline u32 read_tcr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c9, 0" : "=r" (val));
+	return val;
+}
+
+static inline u32 read_tcr1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
+	return val;
+}
+
+static inline void write_trr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
+}
+
+static inline void write_trr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (val));
+}
+
+static inline void write_tisr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (val));
+}
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
new file mode 100644
index 00000000000..5b1f1c8a827
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/timex.h
@@ -0,0 +1,3 @@
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
new file mode 100644
index 00000000000..fa4f80522fa
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -0,0 +1,23 @@
+#include <asm/types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop13xx/include/mach/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..c5345674034
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+#ifndef _VMALLOC_H_
+#define _VMALLOC_H_
+#define VMALLOC_END 	0xfa000000UL
+#endif
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 5b22fdeca52..26cfa318142 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop13xx_io(unsigned long io_addr)
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 77b24cd1d88..5051c03d437 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index e8522b3b816..bc443073a8e 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu;
 
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index 69f07b25b3c..0d099ca87bd 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -23,10 +23,9 @@
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/msi.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msi.h>
 
 /* INTCTL0 CP6 R0 Page 4
  */
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 7825c1aaa27..673b0db2203 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -21,11 +21,11 @@
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 
 #define IOP13XX_PCI_DEBUG 0
 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 246f6d47872..b17ccc8cb47 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/physmap.h>
 #endif
 #include <asm/mach/map.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/iop_adma.h>
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 4877597c875..3ad4696ade4 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
@@ -31,7 +31,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static void __init em7210_timer_init(void)
 {
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index d4fca75ce54..45d61276d23 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -34,7 +34,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <asm/page.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * GLAN Tank timer tick configuration.
diff --git a/arch/arm/mach-iop32x/include/mach/adma.h b/arch/arm/mach-iop32x/include/mach/adma.h
new file mode 100644
index 00000000000..5ed92037dd1
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/adma.h
@@ -0,0 +1,5 @@
+#ifndef IOP32X_ADMA_H
+#define IOP32X_ADMA_H
+#include <asm/hardware/iop3xx-adma.h>
+#endif
+
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
new file mode 100644
index 00000000000..58b01664ffb
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rx
+		mov	\rx, #0xfe000000	@ physical as well as virtual
+		orr	\rx, \rx, #0x00800000	@ location of the UART
+		.endm
+
+#define UART_SHIFT	0
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop32x/include/mach/dma.h b/arch/arm/mach-iop32x/include/mach/dma.h
new file mode 100644
index 00000000000..f8bd817f205
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..b02fb56bafc
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP32x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop32x.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
+	cmp     \irqstat, #0
+	clzne   \irqnr, \irqstat
+	rsbne   \irqnr, \irqnr, #31
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop32x/include/mach/glantank.h b/arch/arm/mach-iop32x/include/mach/glantank.h
new file mode 100644
index 00000000000..958eb91c091
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/glantank.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/glantank.h
+ *
+ * IO-Data GLAN Tank board registers
+ */
+
+#ifndef __GLANTANK_H
+#define __GLANTANK_H
+
+#define GLANTANK_UART		0xfe800000	/* UART */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
new file mode 100644
index 00000000000..708f4ec9db1
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_IOP32X_GPIO_H
+#define __ASM_ARCH_IOP32X_GPIO_H
+
+#include <asm/hardware/iop3xx-gpio.h>
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h
new file mode 100644
index 00000000000..d559c4e6095
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000. The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses. See
+ * arch/arm/plat-iop/pci.c.
+ */
+#define pcibios_assign_all_busses() 1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+
+#ifndef __ASSEMBLY__
+void iop32x_init_irq(void);
+#endif
+
+
+/*
+ * Generic chipset bits
+ */
+#include "iop32x.h"
+
+/*
+ * Board specific bits
+ */
+#include "glantank.h"
+#include "iq80321.h"
+#include "iq31244.h"
+#include "n2100.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
new file mode 100644
index 00000000000..ce54705ba3d
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/io.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a)		(a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
new file mode 100644
index 00000000000..abd9eb49f10
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iop32x.h
+ *
+ * Intel IOP32X Chip definitions
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP32X_H
+#define __IOP32X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
+#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ physical ram on top of pci in the memory map
+ */
+#define IOP32X_MAX_RAM_SIZE            0x40000000UL
+#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
+#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq31244.h b/arch/arm/mach-iop32x/include/mach/iq31244.h
new file mode 100644
index 00000000000..6b6b369e781
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq31244.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iq31244.h
+ *
+ * Intel IQ31244 evaluation board registers
+ */
+
+#ifndef __IQ31244_H
+#define __IQ31244_H
+
+#define IQ31244_UART		0xfe800000	/* UART #1 */
+#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq80321.h b/arch/arm/mach-iop32x/include/mach/iq80321.h
new file mode 100644
index 00000000000..498819b737e
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq80321.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iq80321.h
+ *
+ * Intel IQ80321 evaluation board registers
+ */
+
+#ifndef __IQ80321_H
+#define __IQ80321_H
+
+#define IQ80321_UART		0xfe800000	/* UART #1 */
+#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
new file mode 100644
index 00000000000..33573e09914
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/irqs.h
+ *
+ * Author:	Rory Bolt <rorybolt@pacbell.net>
+ * Copyright:	(C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80321 chipset interrupts
+ */
+#define IRQ_IOP32X_DMA0_EOT	0
+#define IRQ_IOP32X_DMA0_EOC	1
+#define IRQ_IOP32X_DMA1_EOT	2
+#define IRQ_IOP32X_DMA1_EOC	3
+#define IRQ_IOP32X_AA_EOT	6
+#define IRQ_IOP32X_AA_EOC	7
+#define IRQ_IOP32X_CORE_PMON	8
+#define IRQ_IOP32X_TIMER0	9
+#define IRQ_IOP32X_TIMER1	10
+#define IRQ_IOP32X_I2C_0	11
+#define IRQ_IOP32X_I2C_1	12
+#define IRQ_IOP32X_MESSAGING	13
+#define IRQ_IOP32X_ATU_BIST	14
+#define IRQ_IOP32X_PERFMON	15
+#define IRQ_IOP32X_CORE_PMU	16
+#define IRQ_IOP32X_BIU_ERR	17
+#define IRQ_IOP32X_ATU_ERR	18
+#define IRQ_IOP32X_MCU_ERR	19
+#define IRQ_IOP32X_DMA0_ERR	20
+#define IRQ_IOP32X_DMA1_ERR	21
+#define IRQ_IOP32X_AA_ERR	23
+#define IRQ_IOP32X_MSG_ERR	24
+#define IRQ_IOP32X_SSP		25
+#define IRQ_IOP32X_XINT0	27
+#define IRQ_IOP32X_XINT1	28
+#define IRQ_IOP32X_XINT2	29
+#define IRQ_IOP32X_XINT3	30
+#define IRQ_IOP32X_HPI		31
+
+#define NR_IRQS			32
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
new file mode 100644
index 00000000000..42cd4bf3148
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/n2100.h b/arch/arm/mach-iop32x/include/mach/n2100.h
new file mode 100644
index 00000000000..40b8a532b06
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/n2100.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/n2100.h
+ *
+ * Thecus N2100 board registers
+ */
+
+#ifndef __N2100_H
+#define __N2100_H
+
+#define N2100_UART		0xfe800000	/* UART */
+
+#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
+#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
+#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
+#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
+#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
new file mode 100644
index 00000000000..20f923e54f4
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	if (machine_is_n2100()) {
+		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
+		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+		while (1)
+			;
+	}
+
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-iop32x/include/mach/time.h b/arch/arm/mach-iop32x/include/mach/time.h
new file mode 100644
index 00000000000..0f28c994962
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/time.h
@@ -0,0 +1,4 @@
+#ifndef _IOP32X_TIME_H_
+#define _IOP32X_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP32X_TIMER0
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
new file mode 100644
index 00000000000..a541afced3c
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/timex.h
+ *
+ * IOP32x architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
new file mode 100644
index 00000000000..b247551b6f5
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u8 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80321())
+		uart_base = (volatile u8 *)IQ80321_UART;
+	else if (machine_is_iq31244() || machine_is_em7210())
+		uart_base = (volatile u8 *)IQ31244_UART;
+	else
+		uart_base = (volatile u8 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..85ceb09d85f
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 4a89823bceb..082818aaa20 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -26,7 +26,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -36,7 +36,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 1da3c911edd..d735539808b 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -23,7 +23,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80321 timer tick configuration.
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 55cf0162e8c..ba59b2d17db 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop32x_mask;
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2741063bf36..3173f9c5835 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -17,6 +17,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/f75375s.h>
+#include <linux/leds-pca9532.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -29,7 +30,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -39,7 +40,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * N2100 timer tick configuration.
@@ -206,6 +207,53 @@ static struct f75375s_platform_data n2100_f75375s = {
 	.pwm_enable = { 0, 0 },
 };
 
+static struct pca9532_platform_data n2100_leds = {
+	.leds = {
+	{	.name = "n2100:red:satafail0",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:satafail1",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:blue:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{ 	.type = PCA9532_TYPE_NONE },
+
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:red:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+
+	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
+	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
+	{	.type = PCA9532_TYPE_NONE },
+	{	.type = PCA9532_TYPE_NONE },
+
+	{	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:orange:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "N2100 beeper"  ,
+		.state =  PCA9532_OFF,
+		.type = PCA9532_TYPE_N2100_BEEP,
+	},
+	},
+	.psc = { 0, 0 },
+	.pwm = { 0, 0 },
+};
+
 static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -214,6 +262,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 		I2C_BOARD_INFO("f75375", 0x2e),
 		.platform_data = &n2100_f75375s,
 	},
+	{
+		I2C_BOARD_INFO("pca9532", 0x60),
+		.platform_data = &n2100_leds,
+	},
 };
 
 /*
diff --git a/arch/arm/mach-iop33x/include/mach/adma.h b/arch/arm/mach-iop33x/include/mach/adma.h
new file mode 100644
index 00000000000..4b92f795f90
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/adma.h
@@ -0,0 +1,5 @@
+#ifndef IOP33X_ADMA_H
+#define IOP33X_ADMA_H
+#include <asm/hardware/iop3xx-adma.h>
+#endif
+
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
new file mode 100644
index 00000000000..a60c9ef05cc
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ mmu enabled?
+		moveq	\rx, #0xff000000	@ physical
+		movne	\rx, #0xfe000000	@ virtual
+		orr	\rx, \rx, #0x00ff0000
+		orr	\rx, \rx, #0x0000f700
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop33x/include/mach/dma.h b/arch/arm/mach-iop33x/include/mach/dma.h
new file mode 100644
index 00000000000..d8b42232931
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..4e1f7282b35
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP33x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop33x.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
+	cmp     \irqstat, #0
+	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
+	adds    \irqnr, \irqstat, #1
+	movne   \irqnr, \irqstat, lsr #2
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop33x/include/mach/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
new file mode 100644
index 00000000000..ddd55bba9bb
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_IOP33X_GPIO_H
+#define __ASM_ARCH_IOP33X_GPIO_H
+
+#include <asm/hardware/iop3xx-gpio.h>
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
new file mode 100644
index 00000000000..8c10e430655
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000.  The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses.  See
+ * arch/arm/mach-iop3xx/iop3xx-pci.c
+ */
+#define pcibios_assign_all_busses()	1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+
+#ifndef __ASSEMBLY__
+void iop33x_init_irq(void);
+
+extern struct platform_device iop33x_uart0_device;
+extern struct platform_device iop33x_uart1_device;
+#endif
+
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop33x.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80331.h"
+#include "iq80332.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
new file mode 100644
index 00000000000..15887463121
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/io.h
+ *
+ * Copyright (C) 2001  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a)		(a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
new file mode 100644
index 00000000000..24567316ec8
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iop33x.h
+ *
+ * Intel IOP33X Chip definitions
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2003, 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP33X_H
+#define __IOP33X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
+#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* UARTs  */
+#define IOP33X_UART0_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
+#define IOP33X_UART0_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
+#define IOP33X_UART1_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
+#define IOP33X_UART1_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ pci on top of physical ram in memory map
+ */
+#define IOP33X_MAX_RAM_SIZE		0x80000000UL
+#define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
+#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80331.h b/arch/arm/mach-iop33x/include/mach/iq80331.h
new file mode 100644
index 00000000000..fe406b0127f
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80331.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80331.h
+ *
+ * Intel IQ80331 evaluation board registers
+ */
+
+#ifndef __IQ80331_H
+#define __IQ80331_H
+
+#define IQ80331_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80331_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80331_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80331_BATT_STAT	0xce8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80332.h b/arch/arm/mach-iop33x/include/mach/iq80332.h
new file mode 100644
index 00000000000..8325d71f2ed
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80332.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80332.h
+ *
+ * Intel IQ80332 evaluation board registers
+ */
+
+#ifndef __IQ80332_H
+#define __IQ80332_H
+
+#define IQ80332_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80332_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80332_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80332_BATT_STAT	0xce8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h
new file mode 100644
index 00000000000..707628a600a
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/irqs.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/irqs.h
+ *
+ * Author:	Dave Jiang (dave.jiang@intel.com)
+ * Copyright:	(C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80331 chipset interrupts
+ */
+#define IRQ_IOP33X_DMA0_EOT	0
+#define IRQ_IOP33X_DMA0_EOC	1
+#define IRQ_IOP33X_DMA1_EOT	2
+#define IRQ_IOP33X_DMA1_EOC	3
+#define IRQ_IOP33X_AA_EOT	6
+#define IRQ_IOP33X_AA_EOC	7
+#define IRQ_IOP33X_TIMER0	8
+#define IRQ_IOP33X_TIMER1	9
+#define IRQ_IOP33X_I2C_0	10
+#define IRQ_IOP33X_I2C_1	11
+#define IRQ_IOP33X_MSG		12
+#define IRQ_IOP33X_MSGIBQ	13
+#define IRQ_IOP33X_ATU_BIST	14
+#define IRQ_IOP33X_PERFMON	15
+#define IRQ_IOP33X_CORE_PMU	16
+#define IRQ_IOP33X_XINT0	24
+#define IRQ_IOP33X_XINT1	25
+#define IRQ_IOP33X_XINT2	26
+#define IRQ_IOP33X_XINT3	27
+#define IRQ_IOP33X_XINT8	32
+#define IRQ_IOP33X_XINT9	33
+#define IRQ_IOP33X_XINT10	34
+#define IRQ_IOP33X_XINT11	35
+#define IRQ_IOP33X_XINT12	36
+#define IRQ_IOP33X_XINT13	37
+#define IRQ_IOP33X_XINT14	38
+#define IRQ_IOP33X_XINT15	39
+#define IRQ_IOP33X_UART0	51
+#define IRQ_IOP33X_UART1	52
+#define IRQ_IOP33X_PBIE		53
+#define IRQ_IOP33X_ATU_CRW	54
+#define IRQ_IOP33X_ATU_ERR	55
+#define IRQ_IOP33X_MCU_ERR	56
+#define IRQ_IOP33X_DMA0_ERR	57
+#define IRQ_IOP33X_DMA1_ERR	58
+#define IRQ_IOP33X_AA_ERR	60
+#define IRQ_IOP33X_MSG_ERR	62
+#define IRQ_IOP33X_HPI		63
+
+#define NR_IRQS			64
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
new file mode 100644
index 00000000000..2cef0bbb354
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
new file mode 100644
index 00000000000..7bf3bfb4944
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-iop33x/include/mach/time.h b/arch/arm/mach-iop33x/include/mach/time.h
new file mode 100644
index 00000000000..4ac4d7664f8
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/time.h
@@ -0,0 +1,4 @@
+#ifndef _IOP33X_TIME_H_
+#define _IOP33X_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
new file mode 100644
index 00000000000..c75760844d4
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/timex.h
+ *
+ * IOP3xx architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
new file mode 100644
index 00000000000..b42423f6330
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u32 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80331() || machine_is_iq80332())
+		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
+	else
+		uart_base = (volatile u32 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..f9f99dea9bc
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index de39fd77857..c7d99f9fafe 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80331 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 4904fd78445..af616c5f4fb 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80332 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index f09dd054b9c..abb4ea2ed4f 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop33x_mask0;
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
index ac297cd0276..8c21870fa80 100644
--- a/arch/arm/mach-iop33x/uart.c
+++ b/arch/arm/mach-iop33x/uart.c
@@ -24,9 +24,8 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #define IOP33X_UART_XTAL 33334000
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 81cdc826720..a6a4f93085f 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -39,7 +39,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 static DEFINE_SPINLOCK(ixp2000_slowport_lock);
 static unsigned long ixp2000_slowport_irq_flags;
@@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
 	/*
 	 * Then, set the proper trigger type.
 	 */
-	if (type & IRQT_FALLING)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= 1 << line;
 	else
 		GPIO_IRQ_falling_edge &= ~(1 << line);
-	if (type & IRQT_RISING)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= 1 << line;
 	else
 		GPIO_IRQ_rising_edge &= ~(1 << line);
-	if (type & IRQT_LOW)
+	if (type & IRQ_TYPE_LEVEL_LOW)
 		GPIO_IRQ_level_low |= 1 << line;
 	else
 		GPIO_IRQ_level_low &= ~(1 << line);
-	if (type & IRQT_HIGH)
+	if (type & IRQ_TYPE_LEVEL_HIGH)
 		GPIO_IRQ_level_high |= 1 << line;
 	else
 		GPIO_IRQ_level_high &= ~(1 << line);
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 9c49435d42c..c62ed655c1a 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -38,7 +38,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
new file mode 100644
index 00000000000..904ff56d224
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -0,0 +1,27 @@
+/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro  addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xc0000000	@ Physical base
+		movne	\rx, #0xfe000000	@ virtual base
+		orrne	\rx, \rx, #0x00f00000
+		orr	\rx, \rx, #0x00030000
+#ifdef	__ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp2000/include/mach/dma.h b/arch/arm/mach-ixp2000/include/mach/dma.h
new file mode 100644
index 00000000000..26063d60f62
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/dma.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-ixp2000/include/mach/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h
new file mode 100644
index 00000000000..9ce3690061d
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/enp2611.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/enp2611.h
+ *
+ * Register and other defines for Radisys ENP-2611
+ *
+ * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
+ * original version carries the following notices:
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ENP2611_H
+#define __ENP2611_H
+
+#define ENP2611_CALEB_PHYS_BASE		0xc5000000
+#define ENP2611_CALEB_VIRT_BASE		0xfe000000
+#define ENP2611_CALEB_SIZE		0x00100000
+
+#define ENP2611_PM3386_0_PHYS_BASE	0xc6000000
+#define ENP2611_PM3386_0_VIRT_BASE	0xfe100000
+#define ENP2611_PM3386_0_SIZE		0x00100000
+
+#define ENP2611_PM3386_1_PHYS_BASE	0xc6400000
+#define ENP2611_PM3386_1_VIRT_BASE	0xfe200000
+#define ENP2611_PM3386_1_SIZE		0x00100000
+
+#define ENP2611_GPIO_SCL		7
+#define ENP2611_GPIO_SDA		6
+
+#define IRQ_ENP2611_THERMAL		IRQ_IXP2000_GPIO4
+#define IRQ_ENP2611_OPTION_BOARD	IRQ_IXP2000_GPIO3
+#define IRQ_ENP2611_CALEB		IRQ_IXP2000_GPIO2
+#define IRQ_ENP2611_PM3386_1		IRQ_IXP2000_GPIO1
+#define IRQ_ENP2611_PM3386_0		IRQ_IXP2000_GPIO0
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
new file mode 100644
index 00000000000..5850ffc8c75
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP2000-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/irqs.h>
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\irqnr, #0x0              @clear out irqnr as default
+                mov	\base, #0xfe000000
+		orr	\base, \base, #0x00e00000
+		orr	\base, \base, #0x08
+		ldr	\irqstat, [\base]         @ get interrupts
+
+		cmp	\irqstat, #0
+		beq	1001f
+
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		subs    \irqnr, \base, \irqnr
+
+		/*
+		 * We handle PCIA and PCIB here so we don't have an
+		 * extra layer of code just to check these two bits.
+		 */
+		cmp	\irqnr, #IRQ_IXP2000_PCI
+		bne	1001f
+
+		mov	\base, #0xfe000000
+		orr	\base, \base, #0x00c00000
+		orr	\base, \base, #0x00000100
+		orr	\base, \base, #0x00000058
+		ldr	\irqstat, [\base]
+
+		mov	\tmp, #(1<<26)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIA
+		bne	1001f
+
+		mov	\tmp, #(1<<27)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIB
+
+1001:
+		.endm
+
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio.h
new file mode 100644
index 00000000000..4a88d2c33da
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/gpio.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software, you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * IXP2000 GPIO in/out, edge/level detection for IRQs:
+ * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
+ * or both Falling-edge and Rising-edge.  
+ * This must be called *before* the corresponding IRQ is registerd.
+ * Use this instead of directly setting the GPIO registers.
+ * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+
+#define GPIO_IN				0
+#define GPIO_OUT			1
+
+#define IXP2000_GPIO_LOW		0
+#define IXP2000_GPIO_HIGH		1
+
+extern void gpio_line_config(int line, int direction);
+
+static inline int gpio_line_get(int line)
+{
+	return (((*IXP2000_GPIO_PLR) >> line) & 1);
+}
+
+static inline void gpio_line_set(int line, int value)
+{
+	if (value == IXP2000_GPIO_HIGH) {
+		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+	} else if (value == IXP2000_GPIO_LOW) {
+		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+	}
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h
new file mode 100644
index 00000000000..f033de4e749
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/hardware.h
+ *
+ * Hardware definitions for IXP2400/2800 based systems
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2001-2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+/*
+ * This needs to be platform-specific?
+ */
+#define PCIBIOS_MIN_IO          0x00000000
+#define PCIBIOS_MIN_MEM         0x00000000
+
+#include "ixp2000-regs.h"	/* Chipset Registers */
+
+#define pcibios_assign_all_busses() 0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific bits
+ */
+#include "enp2611.h"		/* ENP-2611 */
+#include "ixdp2x00.h"		/* IXDP2400/2800 */
+#include "ixdp2x01.h"		/* IXDP2401/2801 */
+
+#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h
new file mode 100644
index 00000000000..859e584914d
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/io.h
@@ -0,0 +1,134 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002  Intel Corp.
+ * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __mem_pci(a)		(a)
+
+/*
+ * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
+ * transactions the other way round (MEM transactions don't have this
+ * issue), so if we want to support those models, we need to override
+ * the standard I/O functions.
+ *
+ * B0 and later have a bit that can be set to 1 to get the proper
+ * behavior for I/O transactions, which then allows us to use the
+ * standard I/O functions.  This is what we do if the user does not
+ * explicitly ask for support for pre-B0.
+ */
+#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
+#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+
+#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
+#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
+
+#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
+#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
+#define outl(v,p)		__raw_writel((v),___io(p))
+
+#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
+#define inw(p)		\
+	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
+#define inl(p)		\
+	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
+#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
+#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
+#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
+#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
+
+#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
+
+#define ioread8(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readb(alignb(p));		\
+		} else {					\
+			__v = __raw_readb(p);			\
+		}						\
+								\
+		__v;						\
+	})							\
+
+#define ioread16(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readw(alignw(p));		\
+		} else {					\
+			__v = le16_to_cpu(__raw_readw(p));	\
+		}						\
+								\
+		__v;						\
+	})
+
+#define ioread32(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readl(p);			\
+		} else {					\
+			__v = le32_to_cpu(__raw_readl(p));	\
+		}						\
+								\
+		 __v;						\
+	})
+
+#define iowrite8(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writeb((v), alignb(p));		\
+		} else {					\
+			__raw_writeb((v), p);			\
+		}						\
+	})
+
+#define iowrite16(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writew((v), alignw(p));		\
+		} else {					\
+			__raw_writew(cpu_to_le16(v), p);	\
+		}						\
+	})
+
+#define iowrite32(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writel((v), p);			\
+		} else {					\
+			__raw_writel(cpu_to_le32(v), p);	\
+		}						\
+	})
+
+#define ioport_map(port, nr)	___io(port)
+
+#define ioport_unmap(addr)
+#else
+#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h
new file mode 100644
index 00000000000..bee96bcafdc
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/irqs.h
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/irqs.h
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IRQS_H
+#define _IRQS_H
+
+/*
+ * Do NOT add #ifdef MACHINE_FOO in here.
+ * Simpy add your machine IRQs here and increase NR_IRQS if needed to
+ * hold your machine's IRQ table.
+ */
+
+/*
+ * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
+ * register has those bit reserved. We just mark those interrupts
+ * as invalid and this allows us to do mask/unmask with a single
+ * shift operation instead of having to map the IRQ number to
+ * a HW IRQ number.
+ */
+#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
+#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
+#define	IRQ_IXP2000_UART		2
+#define	IRQ_IXP2000_GPIO		3
+#define	IRQ_IXP2000_TIMER1     		4
+#define	IRQ_IXP2000_TIMER2     		5
+#define	IRQ_IXP2000_TIMER3     		6
+#define	IRQ_IXP2000_TIMER4     		7
+#define	IRQ_IXP2000_PMU        		8               
+#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
+#define	IRQ_IXP2000_DMA1      		10
+#define	IRQ_IXP2000_DMA2      		11
+#define	IRQ_IXP2000_DMA3      		12
+#define	IRQ_IXP2000_PCI_DOORBELL	13
+#define	IRQ_IXP2000_ME_ATTN       	14 
+#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
+#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
+#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
+#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
+#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
+#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
+#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
+#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
+#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
+
+/* define generic GPIOs */
+#define IRQ_IXP2000_GPIO0		32
+#define IRQ_IXP2000_GPIO1		33
+#define IRQ_IXP2000_GPIO2		34
+#define IRQ_IXP2000_GPIO3		35
+#define IRQ_IXP2000_GPIO4		36
+#define IRQ_IXP2000_GPIO5		37
+#define IRQ_IXP2000_GPIO6		38
+#define IRQ_IXP2000_GPIO7		39
+
+/* split off the 2 PCI sources */
+#define IRQ_IXP2000_PCIA		40
+#define IRQ_IXP2000_PCIB		41
+
+/* Int sources from IRQ_ERROR_STATUS */
+#define IRQ_IXP2000_DRAM0_MIN_ERR	42
+#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
+#define IRQ_IXP2000_DRAM1_MIN_ERR	44
+#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
+#define IRQ_IXP2000_DRAM2_MIN_ERR	46
+#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
+/* 48-57 reserved */
+#define IRQ_IXP2000_SRAM0_ERR		58
+#define IRQ_IXP2000_SRAM1_ERR		59
+#define IRQ_IXP2000_SRAM2_ERR		60
+#define IRQ_IXP2000_SRAM3_ERR		61
+/* 62-65 reserved */
+#define IRQ_IXP2000_MEDIA_ERR		66
+#define IRQ_IXP2000_PCI_ERR			67
+#define IRQ_IXP2000_SP_INT			68
+
+#define NR_IXP2000_IRQS				69
+
+#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
+
+#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
+
+#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
+#define IXP2000_VALID_ERR_IRQ_MASK (\
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
+
+/*
+ * This allows for all the on-chip sources plus up to 32 CPLD based
+ * IRQs. Should be more than enough.
+ */
+#define	IXP2000_BOARD_IRQS		32
+#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
+
+
+/* 
+ * IXDP2400 specific IRQs
+ */
+#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
+#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
+#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
+#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
+#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
+#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
+#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
+#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
+
+#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
+#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
+
+/* IXDP2800 specific IRQs */
+#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
+#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
+
+#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
+#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
+
+/* 
+ * IRQs on both IXDP2x01 boards
+ */
+#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
+#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
+#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
+#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
+#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
+#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
+#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
+#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
+#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
+#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
+#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
+#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
+#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
+
+#define IXDP2X01_VALID_IRQ_MASK ( \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
+
+/* 
+ * IXDP2401 specific IRQs
+ */
+#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
+
+#define	IXDP2401_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
+
+/*
+ * IXDP2801-specific IRQs
+ */
+#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
+#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
+
+#define	IXDP2801_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
+
+#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
+
+#endif /*_IRQS_H*/
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
new file mode 100644
index 00000000000..5df8479d948
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
+ *
+ * Register and other defines for IXDP2[48]00 platforms
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXDP2X00_H_
+#define _IXDP2X00_H_
+
+/*
+ * On board CPLD memory map
+ */
+#define IXDP2X00_PHYS_CPLD_BASE		0xc7000000
+#define IXDP2X00_VIRT_CPLD_BASE		0xfe000000
+#define IXDP2X00_CPLD_SIZE		0x00100000
+
+
+#define IXDP2X00_CPLD_REG(x)  	\
+	(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
+
+/*
+ * IXDP2400 CPLD registers
+ */
+#define IXDP2400_CPLD_SYSLED		IXDP2X00_CPLD_REG(0x0)  
+#define IXDP2400_CPLD_DISP_DATA		IXDP2X00_CPLD_REG(0x4)
+#define IXDP2400_CPLD_CLOCK_SPEED	IXDP2X00_CPLD_REG(0x8)
+#define IXDP2400_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0xc)
+#define IXDP2400_CPLD_REV		IXDP2X00_CPLD_REG(0x10)
+#define IXDP2400_CPLD_SYS_CLK_M		IXDP2X00_CPLD_REG(0x14)
+#define IXDP2400_CPLD_SYS_CLK_N		IXDP2X00_CPLD_REG(0x18)
+#define IXDP2400_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x48)
+
+/*
+ * IXDP2800 CPLD registers
+ */
+#define IXDP2800_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0x0)
+#define IXDP2800_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x140)
+
+
+#define	IXDP2X00_GPIO_I2C_ENABLE	0x02
+#define	IXDP2X00_GPIO_SCL		0x07
+#define	IXDP2X00_GPIO_SDA		0x06
+
+/*
+ * PCI devfns for on-board devices. We need these to be able to
+ * properly translate IRQs and for device removal.
+ */
+#define	IXDP2400_SLAVE_ENET_DEVFN	0x18	/* Bus 1 */
+#define	IXDP2400_MASTER_ENET_DEVFN	0x20	/* Bus 1 */
+#define	IXDP2400_MEDIA_DEVFN		0x28	/* Bus 1 */
+#define	IXDP2400_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
+
+#define	IXDP2800_SLAVE_ENET_DEVFN	0x20	/* Bus 1 */
+#define	IXDP2800_MASTER_ENET_DEVFN	0x18	/* Bus 1 */
+#define	IXDP2800_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
+
+#define	IXDP2X00_P2P_DEVFN		0x20	/* Bus 0 */
+#define	IXDP2X00_21555_DEVFN		0x30	/* Bus 0 */
+#define IXDP2X00_SLAVE_NPU_DEVFN	0x28	/* Bus 1 */
+#define	IXDP2X00_PMC_DEVFN		0x38	/* Bus 1 */
+#define IXDP2X00_MASTER_NPU_DEVFN	0x38	/* Bus 1 */
+
+#ifndef __ASSEMBLY__
+/*
+ * The master NPU is always PCI master.
+ */
+static inline unsigned int ixdp2x00_master_npu(void)
+{
+	return !!ixp2000_is_pcimaster();
+}
+
+/*
+ * Helper functions used by ixdp2400 and ixdp2800 specific code
+ */
+void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
+void ixdp2x00_slave_pci_postinit(void);
+void ixdp2x00_init_machine(void);
+void ixdp2x00_map_io(void);
+
+#endif
+
+#endif /*_IXDP2X00_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
new file mode 100644
index 00000000000..4c1f04083e5
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
+ *
+ * Platform definitions for IXDP2X01 && IXDP2801 systems
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ *
+ * Based on original code Copyright (c) 2002-2003 Intel Corporation
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __IXDP2X01_H__
+#define __IXDP2X01_H__
+
+#define	IXDP2X01_PHYS_CPLD_BASE		0xc6024000
+#define	IXDP2X01_VIRT_CPLD_BASE		0xfe000000
+#define	IXDP2X01_CPLD_REGION_SIZE	0x00100000
+
+#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
+#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
+
+#define IXDP2X01_UART1_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x40)
+#define IXDP2X01_UART1_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x40)
+
+#define IXDP2X01_UART2_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x60)
+#define IXDP2X01_UART2_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x60)
+
+#define IXDP2X01_CS8900_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x80)
+#define IXDP2X01_CS8900_VIRT_END	(IXDP2X01_CS8900_VIRT_BASE + 16)
+
+#define IXDP2X01_CPLD_RESET_REG         IXDP2X01_CPLD_VIRT_REG(0x00)
+#define IXDP2X01_INT_MASK_SET_REG	IXDP2X01_CPLD_VIRT_REG(0x08)
+#define IXDP2X01_INT_STAT_REG		IXDP2X01_CPLD_VIRT_REG(0x0C)
+#define IXDP2X01_INT_RAW_REG		IXDP2X01_CPLD_VIRT_REG(0x10) 
+#define IXDP2X01_INT_MASK_CLR_REG	IXDP2X01_INT_RAW_REG
+#define IXDP2X01_INT_SIM_REG		IXDP2X01_CPLD_VIRT_REG(0x14)
+
+#define IXDP2X01_CPLD_FLASH_REG		IXDP2X01_CPLD_VIRT_REG(0x20)
+
+#define IXDP2X01_CPLD_FLASH_INTERN 	0x8000
+#define IXDP2X01_CPLD_FLASH_BANK_MASK 	0xF
+#define IXDP2X01_FLASH_WINDOW_BITS 	25
+#define IXDP2X01_FLASH_WINDOW_SIZE 	(1 << IXDP2X01_FLASH_WINDOW_BITS)
+#define IXDP2X01_FLASH_WINDOW_MASK 	(IXDP2X01_FLASH_WINDOW_SIZE - 1)
+
+#define	IXDP2X01_UART_CLK		1843200
+
+#define	IXDP2X01_GPIO_I2C_ENABLE	0x02
+#define	IXDP2X01_GPIO_SCL		0x07
+#define	IXDP2X01_GPIO_SDA		0x06
+
+#endif /* __IXDP2x01_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
new file mode 100644
index 00000000000..19d80379a3e
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
@@ -0,0 +1,457 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
+ *
+ * Chipset register definitions for IXP2400/2800 based systems.
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXP2000_REGS_H_
+#define _IXP2000_REGS_H_
+
+/*
+ * IXP2000 linux memory map:
+ *
+ * virt		phys		size
+ * fb000000	db000000	16M		PCI CFG1
+ * fc000000	da000000	16M		PCI CFG0
+ * fd000000	d8000000	16M		PCI I/O
+ * fe[0-7]00000			8M		per-platform mappings
+ * fe900000	80000000	1M		SRAM #0 (first MB)
+ * fea00000	cb400000	1M		SCRATCH ring get/put
+ * feb00000	c8000000	1M		MSF
+ * fec00000	df000000	1M		PCI CSRs
+ * fed00000	de000000	1M		PCI CREG
+ * fee00000	d6000000	1M		INTCTL
+ * fef00000	c0000000	1M		CAP
+ */
+
+/* 
+ * Static I/O regions.
+ *
+ * Most of the registers are clumped in 4K regions spread throughout
+ * the 0xc0000000 -> 0xc0100000 address range, but we just map in
+ * the whole range using a single 1 MB section instead of small
+ * 4K pages.  This has two advantages for us:
+ *
+ * 1) We use only one TLB entry for large number of on-chip I/O devices.
+ *
+ * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
+ *    as required per erratum #66.  We accomplish this by using a
+ *    new MT_IXP2000_DEVICE memory type with the bits set as required.
+ *
+ * CAP stands for CSR Access Proxy.
+ *
+ * If you change the virtual address of this mapping, please propagate
+ * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
+ * address of the UART located in this region.
+ */
+
+#define	IXP2000_CAP_PHYS_BASE		0xc0000000
+#define	IXP2000_CAP_VIRT_BASE		0xfef00000
+#define	IXP2000_CAP_SIZE		0x00100000
+
+/*
+ * Addresses for specific on-chip peripherals.
+ */
+#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
+#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
+#define	IXP2000_UART_PHYS_BASE		0xc0030000
+#define	IXP2000_UART_VIRT_BASE		0xfef30000
+#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
+#define	IXP2000_UENGINE_CSR_VIRT_BASE	0xfef18000
+#define	IXP2000_GPIO_VIRT_BASE		0xfef10000
+
+/*
+ * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
+ * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
+ * entry-macro.S, so if you ever change these please propagate
+ * the change.
+ */
+#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
+#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
+#define	IXP2000_INTCTL_SIZE		0x00100000
+
+#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
+#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
+#define	IXP2000_PCI_CREG_SIZE		0x00100000
+
+#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
+#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
+#define	IXP2000_PCI_CSR_SIZE		0x00100000
+
+#define IXP2000_MSF_PHYS_BASE		0xc8000000
+#define IXP2000_MSF_VIRT_BASE		0xfeb00000
+#define IXP2000_MSF_SIZE		0x00100000
+
+#define IXP2000_SCRATCH_RING_PHYS_BASE	0xcb400000
+#define IXP2000_SCRATCH_RING_VIRT_BASE	0xfea00000
+#define IXP2000_SCRATCH_RING_SIZE	0x00100000
+
+#define IXP2000_SRAM0_PHYS_BASE		0x80000000
+#define IXP2000_SRAM0_VIRT_BASE		0xfe900000
+#define IXP2000_SRAM0_SIZE		0x00100000
+
+#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
+#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
+#define IXP2000_PCI_IO_SIZE     	0x01000000
+
+#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
+#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
+#define IXP2000_PCI_CFG0_SIZE   	0x01000000
+
+#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
+#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
+#define IXP2000_PCI_CFG1_SIZE		0x01000000
+
+/* 
+ * Timers
+ */
+#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
+/* Timer control */
+#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
+#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
+#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
+#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
+/* Store initial value */
+#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
+#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
+#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
+#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
+/* Read current value */
+#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
+#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
+#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
+#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
+/* Clear associated timer interrupt */
+#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
+#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
+#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
+#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
+/* Timer watchdog enable for T4 */
+#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
+
+#define	WDT_ENABLE			0x00000001
+#define	TIMER_DIVIDER_256		0x00000008
+#define	TIMER_ENABLE			0x00000080
+#define	IRQ_MASK_TIMER1         	(1 << 4)
+
+/*
+ * Interrupt controller registers
+ */
+#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
+#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
+#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
+#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
+#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
+#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
+#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
+#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
+#define IXP2000_IRQ_THD_STATUS_A_0	IXP2000_INTCTL_REG(0xe0)
+#define IXP2000_IRQ_THD_STATUS_A_1	IXP2000_INTCTL_REG(0xe4)
+#define IXP2000_IRQ_THD_STATUS_A_2	IXP2000_INTCTL_REG(0xe8)
+#define IXP2000_IRQ_THD_STATUS_A_3	IXP2000_INTCTL_REG(0xec)
+#define IXP2000_IRQ_THD_STATUS_B_0	IXP2000_INTCTL_REG(0x100)
+#define IXP2000_IRQ_THD_STATUS_B_1	IXP2000_INTCTL_REG(0x104)
+#define IXP2000_IRQ_THD_STATUS_B_2	IXP2000_INTCTL_REG(0x108)
+#define IXP2000_IRQ_THD_STATUS_B_3	IXP2000_INTCTL_REG(0x10c)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
+
+/*
+ * Mask of valid IRQs in the 32-bit IRQ register. We use
+ * this to mark certain IRQs as being invalid.
+ */
+#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
+
+/*
+ * PCI config register access from core
+ */
+#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
+#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
+#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
+#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
+#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
+
+/*
+ * PCI CSRs
+ */
+#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
+
+/*
+ * PCI outbound interrupts
+ */
+#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
+#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
+/*
+ * PCI communications
+ */
+#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
+#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
+#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
+#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
+#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
+#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
+#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
+#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
+
+/*
+ * DMA engines
+ */
+#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
+#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
+#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
+#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
+#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
+#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
+#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
+#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
+#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
+#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
+#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
+#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
+#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
+#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
+#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
+#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
+#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
+#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
+#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
+/*
+ * Size masks for BARs
+ */
+#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
+#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
+/*
+ * Control and uEngine related
+ */
+#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
+#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
+#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
+#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
+#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
+#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
+/*
+ * Inbound PCI interrupt control
+ */
+#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
+#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
+
+#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
+#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Central function bit */
+#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
+
+/* These are from the IRQ register in the PCI ISR register */
+#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
+#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
+#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
+#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
+#define PCI_CONTROL_IEE			(1 << 17)	/* I/O cycle Endian swap Enable */
+
+#define IXP2000_PCI_RST_REL		(1 << 2)
+#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
+#define CFG_PCI_BOOT_HOST		(1 << 2)
+#define CFG_BOOT_PROM			(1 << 1)
+
+/*
+ * SlowPort CSRs
+ *
+ * The slowport is used to access things like flash, SONET framer control
+ * ports, slave microprocessors, CPLDs, and others of chip memory mapped
+ * peripherals.
+ */
+#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
+
+#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
+#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
+#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
+#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
+#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
+#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
+#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
+#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
+#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
+#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
+#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
+
+/*
+ * CCR values.  
+ * The CCR configures the clock division for the slowport interface.
+ */
+#define	SLOWPORT_CCR_DIV_1		0x00
+#define	SLOWPORT_CCR_DIV_2		0x01
+#define	SLOWPORT_CCR_DIV_4		0x02
+#define	SLOWPORT_CCR_DIV_6		0x03
+#define	SLOWPORT_CCR_DIV_8		0x04
+#define	SLOWPORT_CCR_DIV_10		0x05
+#define	SLOWPORT_CCR_DIV_12		0x06
+#define	SLOWPORT_CCR_DIV_14		0x07
+#define	SLOWPORT_CCR_DIV_16		0x08
+#define	SLOWPORT_CCR_DIV_18		0x09
+#define	SLOWPORT_CCR_DIV_20		0x0a
+#define	SLOWPORT_CCR_DIV_22		0x0b
+#define	SLOWPORT_CCR_DIV_24		0x0c
+#define	SLOWPORT_CCR_DIV_26		0x0d
+#define	SLOWPORT_CCR_DIV_28		0x0e
+#define	SLOWPORT_CCR_DIV_30		0x0f
+
+/*
+ * PCR values.  PCR configure the mode of the interface.
+ */
+#define	SLOWPORT_MODE_FLASH		0x00
+#define	SLOWPORT_MODE_LUCENT		0x01
+#define	SLOWPORT_MODE_PMC_SIERRA	0x02
+#define	SLOWPORT_MODE_INTEL_UP		0x03
+#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
+
+/*
+ * ADC values.  Defines data and address bus widths.
+ */
+#define	SLOWPORT_ADDR_WIDTH_8		0x00
+#define	SLOWPORT_ADDR_WIDTH_16		0x01
+#define	SLOWPORT_ADDR_WIDTH_24		0x02
+#define	SLOWPORT_ADDR_WIDTH_32		0x03
+#define	SLOWPORT_DATA_WIDTH_8		0x00
+#define	SLOWPORT_DATA_WIDTH_16		0x10
+#define	SLOWPORT_DATA_WIDTH_24		0x20
+#define	SLOWPORT_DATA_WIDTH_32		0x30
+
+/*
+ * Masks and shifts for various fields in the WTC and RTC registers.
+ */
+#define	SLOWPORT_WRTC_MASK_HD		0x0003
+#define	SLOWPORT_WRTC_MASK_PW		0x003c
+#define	SLOWPORT_WRTC_MASK_SU		0x03c0
+
+#define	SLOWPORT_WRTC_SHIFT_HD		0x00
+#define	SLOWPORT_WRTC_SHIFT_SU		0x02
+#define	SLOWPORT_WRTC_SHFIT_PW		0x06
+
+
+/*
+ * GPIO registers & GPIO interface.
+ */
+#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
+#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
+#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
+#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
+#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
+#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
+#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
+#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
+#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
+#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
+#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
+#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
+#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
+#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
+#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
+#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
+#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
+#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
+
+/*
+ * "Global" registers...whatever that's supposed to mean.
+ */
+#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
+#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
+
+#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
+#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
+#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
+#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
+#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
+#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
+#define IXP2000_MAJ_REV_MASK	      	0x000000F0
+#define IXP2000_MIN_REV_MASK	      	0x0000000F
+#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
+
+#define IXP2000_PRODUCT_ID		GLOBAL_REG(0x00)
+#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
+#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
+#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
+#define IXP2000_RESET1      		GLOBAL_REG(0x10)
+#define IXP2000_CCR            		GLOBAL_REG(0x14)
+#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
+
+#define	RSTALL				(1 << 16)
+#define	WDT_RESET_ENABLE		0x01000000
+
+
+/*
+ * MSF registers.  The IXP2400 and IXP2800 have somewhat different MSF
+ * units, but the registers that differ between the two don't overlap,
+ * so we can have one register list for both.
+ */
+#define IXP2000_MSF_REG(x)			((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
+#define IXP2000_MSF_RX_CONTROL			IXP2000_MSF_REG(0x0000)
+#define IXP2000_MSF_TX_CONTROL			IXP2000_MSF_REG(0x0004)
+#define IXP2000_MSF_INTERRUPT_STATUS		IXP2000_MSF_REG(0x0008)
+#define IXP2000_MSF_INTERRUPT_ENABLE		IXP2000_MSF_REG(0x000c)
+#define IXP2000_MSF_CSIX_TYPE_MAP		IXP2000_MSF_REG(0x0010)
+#define IXP2000_MSF_FC_EGRESS_STATUS		IXP2000_MSF_REG(0x0014)
+#define IXP2000_MSF_FC_INGRESS_STATUS		IXP2000_MSF_REG(0x0018)
+#define IXP2000_MSF_HWM_CONTROL			IXP2000_MSF_REG(0x0024)
+#define IXP2000_MSF_FC_STATUS_OVERRIDE		IXP2000_MSF_REG(0x0028)
+#define IXP2000_MSF_CLOCK_CONTROL		IXP2000_MSF_REG(0x002c)
+#define IXP2000_MSF_RX_PORT_MAP			IXP2000_MSF_REG(0x0040)
+#define IXP2000_MSF_RBUF_ELEMENT_DONE		IXP2000_MSF_REG(0x0044)
+#define IXP2000_MSF_RX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0	IXP2000_MSF_REG(0x0050)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1	IXP2000_MSF_REG(0x0054)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2	IXP2000_MSF_REG(0x0058)
+#define IXP2000_MSF_TX_SEQUENCE_0		IXP2000_MSF_REG(0x0060)
+#define IXP2000_MSF_TX_SEQUENCE_1		IXP2000_MSF_REG(0x0064)
+#define IXP2000_MSF_TX_SEQUENCE_2		IXP2000_MSF_REG(0x0068)
+#define IXP2000_MSF_TX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_TX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_RX_UP_CONTROL_0		IXP2000_MSF_REG(0x0080)
+#define IXP2000_MSF_RX_UP_CONTROL_1		IXP2000_MSF_REG(0x0084)
+#define IXP2000_MSF_RX_UP_CONTROL_2		IXP2000_MSF_REG(0x0088)
+#define IXP2000_MSF_RX_UP_CONTROL_3		IXP2000_MSF_REG(0x008c)
+#define IXP2000_MSF_TX_UP_CONTROL_0		IXP2000_MSF_REG(0x0090)
+#define IXP2000_MSF_TX_UP_CONTROL_1		IXP2000_MSF_REG(0x0094)
+#define IXP2000_MSF_TX_UP_CONTROL_2		IXP2000_MSF_REG(0x0098)
+#define IXP2000_MSF_TX_UP_CONTROL_3		IXP2000_MSF_REG(0x009c)
+#define IXP2000_MSF_TRAIN_DATA			IXP2000_MSF_REG(0x00a0)
+#define IXP2000_MSF_TRAIN_CALENDAR		IXP2000_MSF_REG(0x00a4)
+#define IXP2000_MSF_TRAIN_FLOW_CONTROL		IXP2000_MSF_REG(0x00a8)
+#define IXP2000_MSF_TX_CALENDAR_0		IXP2000_MSF_REG(0x1000)
+#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS	IXP2000_MSF_REG(0x1400)
+
+
+#endif				/* _IXP2000_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
new file mode 100644
index 00000000000..241529a7c52
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/memory.h
+ *
+ * Copyright (c) 2002 Intel Corp.
+ * Copyright (c) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#include <mach/ixp2000-regs.h>
+
+#define __virt_to_bus(v) \
+	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+
+#define __bus_to_virt(b) \
+	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+
+#endif
+
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
new file mode 100644
index 00000000000..42182c79ed9
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+/*
+ * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
+ * XCB=101 instead, but that makes all I/O accesses bufferable.  This
+ * is not a problem in general, but we do have to be slightly more
+ * careful because I/O writes are no longer automatically flushed out
+ * of the write buffer.
+ *
+ * In cases where we want to make sure that a write has been flushed
+ * out of the write buffer before we proceed, for example when masking
+ * a device interrupt before re-enabling IRQs in CPSR, we can use this
+ * function, ixp2000_reg_wrb, which performs a write, a readback, and
+ * issues a dummy instruction dependent on the value of the readback
+ * (mov rX, rX) to make sure that the readback has completed before we
+ * continue.
+ */
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	unsigned long dummy;
+
+	*((volatile unsigned long *)reg) = val;
+
+	dummy = *((volatile unsigned long *)reg);
+	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+/*
+ * Boards may multiplex different devices on the 2nd channel of 
+ * the slowport interface that each need different configuration 
+ * settings.  For example, the IXDP2400 uses channel 2 on the interface 
+ * to access the CPLD, the switch fabric card, and the media card.  Each
+ * one needs a different mode so drivers must save/restore the mode 
+ * before and after each operation.  
+ *
+ * acquire_slowport(&your_config);
+ * ...
+ * do slowport operations
+ * ...
+ * release_slowport();
+ *
+ * Note that while you have the slowport, you are holding a spinlock,
+ * so your code should be written as if you explicitly acquired a lock.
+ *
+ * The configuration only affects device 2 on the slowport, so the
+ * MTD map driver does not acquire/release the slowport.  
+ */
+struct slowport_cfg {
+	unsigned long CCR;	/* Clock divide */
+	unsigned long WTC;	/* Write Timing Control */
+	unsigned long RTC;	/* Read Timing Control */
+	unsigned long PCR;	/* Protocol Control Register */
+	unsigned long ADC;	/* Address/Data Width Control */
+};
+
+
+void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
+void ixp2000_release_slowport(struct slowport_cfg *);
+
+/*
+ * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
+ * tweaking of addresses in the MTD driver.
+ */
+static inline unsigned ixp2000_has_broken_slowport(void)
+{
+	unsigned long id = *IXP2000_PRODUCT_ID;
+	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
+				      IXP2000_MIN_PROD_TYPE_MASK);
+	return (((id_prod ==
+		  /* fixed in IXP2400-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2800-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2850-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
+}
+
+static inline unsigned int ixp2000_has_flash(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
+}
+
+static inline unsigned int ixp2000_is_pcimaster(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
+}
+
+void ixp2000_map_io(void);
+void ixp2000_uart_init(void);
+void ixp2000_init_irq(void);
+void ixp2000_init_time(unsigned long);
+unsigned long ixp2000_gettimeoffset(void);
+
+struct pci_sys_data;
+
+u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
+void ixp2000_pci_preinit(void);
+int ixp2000_pci_setup(int, struct pci_sys_data*);
+struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
+int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
+int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
+
+/*
+ * Several of the IXP2000 systems have banked flash so we need to extend the
+ * flash_platform_data structure with some private pointers
+ */
+struct ixp2000_flash_data {
+	struct flash_platform_data *platform_data;
+	int nr_banks;
+	unsigned long (*bank_setup)(unsigned long);
+};
+
+struct ixp2000_i2c_pins {
+	unsigned long sda_pin;
+	unsigned long scl_pin;
+};
+
+
+#endif /*  !__ASSEMBLY__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
new file mode 100644
index 00000000000..2e9c68f95a2
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyricht (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	/*
+	 * Reset flash banking register so that we are pointing at
+	 * RedBoot bank.
+	 */
+	if (machine_is_ixdp2401()) {
+		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+						| IXDP2X01_CPLD_FLASH_INTERN));
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
+	}
+
+	/*
+	 * On IXDP2801 we need to write this magic sequence to the CPLD
+	 * to cause a complete reset of the CPU and all external devices
+	 * and move the flash bank register back to 0.
+	 */
+	if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
+		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
+		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
+	}
+
+	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
+}
diff --git a/arch/arm/mach-ixp2000/include/mach/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h
new file mode 100644
index 00000000000..835e659f93d
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/timex.h
+ *
+ * IXP2000 architecture timex specifications
+ */
+
+
+/*
+ * Default clock is 50MHz APB, but platform code can override this
+ */
+#define CLOCK_TICK_RATE	50000000
+
+
diff --git a/arch/arm/mach-ixp2000/include/mach/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h
new file mode 100644
index 00000000000..ce363087df7
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/uncompress.h
+ *
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_BASE	0xc0030000
+
+#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
+
+#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
+#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
+#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
+#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
+#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
+#define UARTLCR         PHYS(0x0c)      /* Control reg */
+#define UARTSR          PHYS(0x14)      /* Status reg */
+
+
+static inline void putc(int c)
+{
+	int j = 0x1000;
+
+	while (--j && !(*UARTSR & UART_LSR_THRE))
+		barrier();
+
+	*UARTDR = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
new file mode 100644
index 00000000000..d195e35aed3
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/vmalloc.h
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END	    0xfb000000
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index ce7c15c7300..c673b9ef9f6 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 14f09b80ab7..6715b50829a 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 73c651e83d9..5a781fd9757 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
@@ -41,7 +41,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/arch.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 
 /*************************************************************************
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index d3d730d2fc2..78a2341dee2 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 03f4cf7f9de..03d916fbe53 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 5fea5a13293..68b4ac5b248 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -32,8 +32,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -126,23 +125,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type) {
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index d3a779a7a35..1c06bfc5a7e 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..905db318872
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/ixp23xx.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ mmu enabled?
+		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
+		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
+#ifdef __ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp23xx/include/mach/dma.h b/arch/arm/mach-ixp23xx/include/mach/dma.h
new file mode 100644
index 00000000000..8886544b93f
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..3f5338a7bbd
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
+		ldr	\irqnr, [\irqnr]	@ get interrupt number
+		cmp	\irqnr, #0x0		@ spurious interrupt ?
+		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
+		subne	\irqnr, \irqnr, #1	@ convert to 0 based
+
+#if 0
+		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
+		bne	1001f
+		mov	\irqnr, #IRQ_IXP23XX_INTA
+
+		ldr	\irqnr, =0xf5000030
+
+		mov	\tmp, #(1<<26)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTB
+
+		mov	\tmp, #(1<<27)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTA
+1001:
+#endif
+		.endm
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
new file mode 100644
index 00000000000..c3192009a88
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/hardware.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ * Copyricht (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Hardware definitions for IXP23XX based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* PCI IO info */
+#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0xe0000000
+
+#include "ixp23xx.h"
+
+#define pcibios_assign_all_busses()	0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific headers
+ */
+#include "ixdp2351.h"
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
new file mode 100644
index 00000000000..305ea1808c7
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2003-2005 Intel Corp.
+ * Copyright (C) 2005 MontaVista Software, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
+#define __mem_pci(a)	(a)
+
+#include <linux/kernel.h>	/* For BUG */
+
+static inline void __iomem *
+ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
+{
+	if (addr >= IXP23XX_PCI_MEM_START &&
+		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
+		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
+			return NULL;
+
+		return (void __iomem *)
+ 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
+	}
+
+	return __arm_ioremap(addr, size, mtype);
+}
+
+static inline void
+ixp23xx_iounmap(void __iomem *addr)
+{
+	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
+	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
+		return;
+
+	__iounmap(addr);
+}
+
+#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
+#define __arch_iounmap(a)	ixp23xx_iounmap(a)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h
new file mode 100644
index 00000000000..3af33a04b8a
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/irqs.h
@@ -0,0 +1,223 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/irqs.h
+ *
+ * IRQ definitions for IXP23XX based systems
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright (C) 2003-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
+#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
+
+
+#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
+#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
+#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
+#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
+#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
+#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
+#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
+#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
+#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
+#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
+#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
+#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
+#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
+#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
+#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
+#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
+#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
+#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
+#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
+#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
+#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
+#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
+#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
+#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
+#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
+#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
+#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
+#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
+#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
+#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
+#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
+#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
+#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
+#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
+#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
+#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
+#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
+#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
+#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
+#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
+#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
+#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
+
+#define NUM_IXP23XX_RAW_IRQS		120
+
+#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
+#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
+
+#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
+
+/*
+ * We default to 32 per-board IRQs. Increase this number if you need
+ * more, but keep it realistic.
+ */
+#define NR_IXP23XX_MACH_IRQS 		32
+
+#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
+
+#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
+
+
+/*
+ * IXDP2351-specific interrupts
+ */
+
+/*
+ * External PCI interrupts signaled through INTB
+ *
+ */
+#define IXDP2351_INTB_IRQ_BASE 		0
+#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
+#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
+#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
+#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
+#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
+#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
+#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
+#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
+#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
+
+#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
+#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
+#define IXDP2351_INTB_IRQ_VALID		0x01FF
+#define IXDP2351_INTB_IRQ_NUM 		16
+
+/*
+ * Other external interrupts signaled through INTA
+ */
+#define IXDP2351_INTA_IRQ_BASE 		16
+#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
+#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
+#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
+#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
+#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
+#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
+#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
+#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
+#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
+#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
+#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
+#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
+#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
+#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
+
+#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
+#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
+#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
+#define IXDP2351_INTA_IRQ_NUM 		16
+
+
+/*
+ * ADI RoadRunner IRQs
+ */
+#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
+#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
+#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
+#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
+
+/*
+ * Put new board definitions here
+ */
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
new file mode 100644
index 00000000000..663951027de
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
+ *
+ * Register and other defines for IXDP2351
+ *
+ * Copyright (c) 2002-2004 Intel Corp.
+ * Copytight (c) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_IXDP2351_H
+#define __ASM_ARCH_IXDP2351_H
+
+/*
+ * NP module memory map
+ */
+#define IXDP2351_NP_PHYS_BASE		(IXP23XX_EXP_BUS_CS4_BASE)
+#define IXDP2351_NP_PHYS_SIZE		0x00100000
+#define IXDP2351_NP_VIRT_BASE		0xeff00000
+
+#define IXDP2351_VIRT_CS8900_BASE	(IXDP2351_NP_VIRT_BASE)
+#define IXDP2351_VIRT_CS8900_END	(IXDP2351_VIRT_CS8900_BASE + 16)
+
+#define IXDP2351_VIRT_NP_CPLD_BASE 	(IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
+
+#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
+
+#define IXDP2351_NP_CPLD_RESET1_REG	IXDP2351_NP_CPLD_REG(0x00)
+#define IXDP2351_NP_CPLD_LED_REG	IXDP2351_NP_CPLD_REG(0x02)
+#define IXDP2351_NP_CPLD_VERSION_REG	IXDP2351_NP_CPLD_REG(0x04)
+
+/*
+ * Base board module memory map
+ */
+
+#define IXDP2351_BB_BASE_PHYS		(IXP23XX_EXP_BUS_CS5_BASE)
+#define IXDP2351_BB_SIZE		0x01000000
+#define IXDP2351_BB_BASE_VIRT		(0xee000000)
+
+#define IXDP2351_BB_AREA_BASE(offset)	(IXDP2351_BB_BASE_VIRT + offset)
+
+#define IXDP2351_VIRT_NVRAM_BASE	IXDP2351_BB_AREA_BASE(0x0)
+#define IXDP2351_NVRAM_SIZE		(0x20000)
+
+#define IXDP2351_VIRT_MB_IXF1104_BASE	IXDP2351_BB_AREA_BASE(0x00020000)
+#define IXDP2351_VIRT_ADD_UART_BASE	IXDP2351_BB_AREA_BASE(0x000240C0)
+#define IXDP2351_VIRT_FIC_BASE		IXDP2351_BB_AREA_BASE(0x00200000)
+#define IXDP2351_VIRT_DB0_BASE		IXDP2351_BB_AREA_BASE(0x00400000)
+#define IXDP2351_VIRT_DB1_BASE		IXDP2351_BB_AREA_BASE(0x00600000)
+#define IXDP2351_VIRT_CPLD_BASE		IXDP2351_BB_AREA_BASE(0x00024000)
+
+/*
+ * On board CPLD registers
+ */
+#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
+
+#define IXDP2351_CPLD_RESET0_REG	IXDP2351_CPLD_BB_REG(0x00)
+#define IXDP2351_CPLD_RESET1_REG	IXDP2351_CPLD_BB_REG(0x04)
+
+#define IXDP2351_CPLD_RESET1_MAGIC 	0x55AA
+#define IXDP2351_CPLD_RESET1_ENABLE 	0x8000
+
+#define IXDP2351_CPLD_FPGA_CONFIG_REG	IXDP2351_CPLD_BB_REG(0x08)
+#define IXDP2351_CPLD_INTB_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x10)
+#define IXDP2351_CPLD_INTA_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x14)
+#define IXDP2351_CPLD_INTB_STAT_REG	IXDP2351_CPLD_BB_REG(0x18)
+#define IXDP2351_CPLD_INTA_STAT_REG	IXDP2351_CPLD_BB_REG(0x1C)
+#define IXDP2351_CPLD_INTB_RAW_REG	IXDP2351_CPLD_BB_REG(0x20)	/* read */
+#define IXDP2351_CPLD_INTA_RAW_REG	IXDP2351_CPLD_BB_REG(0x24)	/* read */
+#define IXDP2351_CPLD_INTB_MASK_CLR_REG	IXDP2351_CPLD_INTB_RAW_REG	/* write */
+#define IXDP2351_CPLD_INTA_MASK_CLR_REG	IXDP2351_CPLD_INTA_RAW_REG	/* write */
+#define IXDP2351_CPLD_INTB_SIM_REG	IXDP2351_CPLD_BB_REG(0x28)
+#define IXDP2351_CPLD_INTA_SIM_REG	IXDP2351_CPLD_BB_REG(0x2C)
+	/* Interrupt bits are defined in irqs.h */
+#define IXDP2351_CPLD_BB_GBE0_REG	IXDP2351_CPLD_BB_REG(0x30)
+#define IXDP2351_CPLD_BB_GBE1_REG	IXDP2351_CPLD_BB_REG(0x34)
+
+/* #define IXDP2351_CPLD_BB_MISC_REG	IXDP2351_CPLD_REG(0x1C) */
+/* #define IXDP2351_CPLD_BB_MISC_REV_MASK	0xFF		*/
+/* #define IXDP2351_CPLD_BB_GDXCS0_REG	IXDP2351_CPLD_REG(0x24) */
+/* #define IXDP2351_CPLD_BB_GDXCS1_REG	IXDP2351_CPLD_REG(0x28) */
+/* #define IXDP2351_CPLD_BB_CLOCK_REG	IXDP2351_CPLD_REG(0x04) */
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
new file mode 100644
index 00000000000..6d02481b1d6
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
@@ -0,0 +1,298 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
+ *
+ * Register definitions for IXP23XX
+ *
+ * Copyright (C) 2003-2005 Intel Corporation.
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IXP23XX_H
+#define __ASM_ARCH_IXP23XX_H
+
+/*
+ * IXP2300 linux memory map:
+ *
+ * virt		phys		size
+ * fffd0000	a0000000	64K		XSI2CPP_CSR
+ * fffc0000	c4000000	4K		EXP_CFG
+ * fff00000	c8000000	64K		PERIPHERAL
+ * fe000000	1c0000000	16M		CAP_CSR
+ * fd000000	1c8000000	16M		MSF_CSR
+ * fb000000			16M		---
+ * fa000000	1d8000000	32M		PCI_IO
+ * f8000000	1da000000	32M		PCI_CFG
+ * f6000000	1de000000	32M		PCI_CREG
+ * f4000000			32M		---
+ * f0000000	1e0000000	64M		PCI_MEM
+ * e[c-f]000000					per-platform mappings
+ */
+
+
+/****************************************************************************
+ * Static mappings.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_CSR_PHYS	0xa0000000
+#define IXP23XX_XSI2CPP_CSR_VIRT	0xfffd0000
+#define IXP23XX_XSI2CPP_CSR_SIZE	0x00010000
+
+#define IXP23XX_EXP_CFG_PHYS		0xc4000000
+#define IXP23XX_EXP_CFG_VIRT		0xfffc0000
+#define IXP23XX_EXP_CFG_SIZE		0x00001000
+
+#define IXP23XX_PERIPHERAL_PHYS		0xc8000000
+#define IXP23XX_PERIPHERAL_VIRT		0xfff00000
+#define IXP23XX_PERIPHERAL_SIZE		0x00010000
+
+#define IXP23XX_CAP_CSR_PHYS		0x1c0000000ULL
+#define IXP23XX_CAP_CSR_VIRT		0xfe000000
+#define IXP23XX_CAP_CSR_SIZE		0x01000000
+
+#define IXP23XX_MSF_CSR_PHYS		0x1c8000000ULL
+#define IXP23XX_MSF_CSR_VIRT		0xfd000000
+#define IXP23XX_MSF_CSR_SIZE		0x01000000
+
+#define IXP23XX_PCI_IO_PHYS		0x1d8000000ULL
+#define IXP23XX_PCI_IO_VIRT		0xfa000000
+#define IXP23XX_PCI_IO_SIZE		0x02000000
+
+#define IXP23XX_PCI_CFG_PHYS		0x1da000000ULL
+#define IXP23XX_PCI_CFG_VIRT		0xf8000000
+#define IXP23XX_PCI_CFG_SIZE		0x02000000
+#define IXP23XX_PCI_CFG0_VIRT		IXP23XX_PCI_CFG_VIRT
+#define IXP23XX_PCI_CFG1_VIRT		(IXP23XX_PCI_CFG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_CREG_PHYS		0x1de000000ULL
+#define IXP23XX_PCI_CREG_VIRT		0xf6000000
+#define IXP23XX_PCI_CREG_SIZE		0x02000000
+#define IXP23XX_PCI_CSR_VIRT		(IXP23XX_PCI_CREG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_MEM_START		0xe0000000
+#define IXP23XX_PCI_MEM_PHYS		0x1e0000000ULL
+#define IXP23XX_PCI_MEM_VIRT		0xf0000000
+#define IXP23XX_PCI_MEM_SIZE		0x04000000
+
+
+/****************************************************************************
+ * XSI2CPP CSRs.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_REG(x)		((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
+#define IXP23XX_CPP2XSI_CURR_XFER_REG3	IXP23XX_XSI2CPP_REG(0xf8)
+#define IXP23XX_CPP2XSI_ADDR_31		(1 << 19)
+#define IXP23XX_CPP2XSI_PSH_OFF		(1 << 20)
+#define IXP23XX_CPP2XSI_COH_OFF		(1 << 21)
+
+
+/****************************************************************************
+ * Expansion Bus Config.
+ ****************************************************************************/
+#define IXP23XX_EXP_CFG_REG(x)		((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
+#define IXP23XX_EXP_CS0			IXP23XX_EXP_CFG_REG(0x00)
+#define IXP23XX_EXP_CS1			IXP23XX_EXP_CFG_REG(0x04)
+#define IXP23XX_EXP_CS2			IXP23XX_EXP_CFG_REG(0x08)
+#define IXP23XX_EXP_CS3			IXP23XX_EXP_CFG_REG(0x0c)
+#define IXP23XX_EXP_CS4			IXP23XX_EXP_CFG_REG(0x10)
+#define IXP23XX_EXP_CS5			IXP23XX_EXP_CFG_REG(0x14)
+#define IXP23XX_EXP_CS6			IXP23XX_EXP_CFG_REG(0x18)
+#define IXP23XX_EXP_CS7			IXP23XX_EXP_CFG_REG(0x1c)
+#define IXP23XX_FLASH_WRITABLE		(0x2)
+#define IXP23XX_FLASH_BUS8		(0x1)
+
+#define IXP23XX_EXP_CFG0		IXP23XX_EXP_CFG_REG(0x20)
+#define IXP23XX_EXP_CFG1		IXP23XX_EXP_CFG_REG(0x24)
+#define IXP23XX_EXP_CFG0_MEM_MAP		(1 << 31)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL 	(3 << 22)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN	(1 << 21)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL		(3 << 19)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_EN		(1 << 18)
+#define IXP23XX_EXP_CFG0_PCI_SWIN		(3 << 16)
+#define IXP23XX_EXP_CFG0_PCI_DWIN		(3 << 14)
+#define IXP23XX_EXP_CFG0_PCI33_MODE		(1 << 13)
+#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL		(1 << 12)
+#define IXP23XX_EXP_CFG0_CPP_DIV_SEL		(1 << 5)
+#define IXP23XX_EXP_CFG0_XSI_NOT_PRES		(1 << 4)
+#define IXP23XX_EXP_CFG0_PROM_BOOT		(1 << 3)
+#define IXP23XX_EXP_CFG0_PCI_ARB		(1 << 2)
+#define IXP23XX_EXP_CFG0_PCI_HOST		(1 << 1)
+#define IXP23XX_EXP_CFG0_FLASH_WIDTH		(1 << 0)
+
+#define IXP23XX_EXP_UNIT_FUSE		IXP23XX_EXP_CFG_REG(0x28)
+#define IXP23XX_EXP_MSF_MUX		IXP23XX_EXP_CFG_REG(0x30)
+#define IXP23XX_EXP_CFG_FUSE		IXP23XX_EXP_CFG_REG(0x34)
+
+#define IXP23XX_EXP_BUS_PHYS		0x90000000
+#define IXP23XX_EXP_BUS_WINDOW_SIZE	0x01000000
+
+#define IXP23XX_EXP_BUS_CS0_BASE	(IXP23XX_EXP_BUS_PHYS + 0x00000000)
+#define IXP23XX_EXP_BUS_CS1_BASE	(IXP23XX_EXP_BUS_PHYS + 0x01000000)
+#define IXP23XX_EXP_BUS_CS2_BASE	(IXP23XX_EXP_BUS_PHYS + 0x02000000)
+#define IXP23XX_EXP_BUS_CS3_BASE	(IXP23XX_EXP_BUS_PHYS + 0x03000000)
+#define IXP23XX_EXP_BUS_CS4_BASE	(IXP23XX_EXP_BUS_PHYS + 0x04000000)
+#define IXP23XX_EXP_BUS_CS5_BASE	(IXP23XX_EXP_BUS_PHYS + 0x05000000)
+#define IXP23XX_EXP_BUS_CS6_BASE	(IXP23XX_EXP_BUS_PHYS + 0x06000000)
+#define IXP23XX_EXP_BUS_CS7_BASE	(IXP23XX_EXP_BUS_PHYS + 0x07000000)
+
+
+/****************************************************************************
+ * Peripherals.
+ ****************************************************************************/
+#define IXP23XX_UART1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x0000)
+#define IXP23XX_UART2_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x1000)
+#define IXP23XX_PMU_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x2000)
+#define IXP23XX_INTC_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x3000)
+#define IXP23XX_GPIO_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x4000)
+#define IXP23XX_TIMER_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x5000)
+#define IXP23XX_NPE0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x6000)
+#define IXP23XX_DSR_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x7000)
+#define IXP23XX_NPE1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x8000)
+#define IXP23XX_ETH0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x9000)
+#define IXP23XX_ETH1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xA000)
+#define IXP23XX_GIG0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xB000)
+#define IXP23XX_GIG1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xC000)
+#define IXP23XX_DDRS_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xD000)
+
+#define IXP23XX_UART1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x0000)
+#define IXP23XX_UART2_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x1000)
+#define IXP23XX_PMU_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x2000)
+#define IXP23XX_INTC_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x3000)
+#define IXP23XX_GPIO_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x4000)
+#define IXP23XX_TIMER_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x5000)
+#define IXP23XX_NPE0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x6000)
+#define IXP23XX_DSR_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x7000)
+#define IXP23XX_NPE1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x8000)
+#define IXP23XX_ETH0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x9000)
+#define IXP23XX_ETH1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xA000)
+#define IXP23XX_GIG0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xB000)
+#define IXP23XX_GIG1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xC000)
+#define IXP23XX_DDRS_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xD000)
+
+
+/****************************************************************************
+ * Interrupt controller.
+ ****************************************************************************/
+#define IXP23XX_INTC_REG(x)		 ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
+#define IXP23XX_INTR_ST1		IXP23XX_INTC_REG(0x00)
+#define IXP23XX_INTR_ST2		IXP23XX_INTC_REG(0x04)
+#define IXP23XX_INTR_ST3		IXP23XX_INTC_REG(0x08)
+#define IXP23XX_INTR_ST4		IXP23XX_INTC_REG(0x0c)
+#define IXP23XX_INTR_EN1		IXP23XX_INTC_REG(0x10)
+#define IXP23XX_INTR_EN2		IXP23XX_INTC_REG(0x14)
+#define IXP23XX_INTR_EN3		IXP23XX_INTC_REG(0x18)
+#define IXP23XX_INTR_EN4		IXP23XX_INTC_REG(0x1c)
+#define IXP23XX_INTR_SEL1		IXP23XX_INTC_REG(0x20)
+#define IXP23XX_INTR_SEL2		IXP23XX_INTC_REG(0x24)
+#define IXP23XX_INTR_SEL3		IXP23XX_INTC_REG(0x28)
+#define IXP23XX_INTR_SEL4		IXP23XX_INTC_REG(0x2c)
+#define IXP23XX_INTR_IRQ_ST1		IXP23XX_INTC_REG(0x30)
+#define IXP23XX_INTR_IRQ_ST2		IXP23XX_INTC_REG(0x34)
+#define IXP23XX_INTR_IRQ_ST3		IXP23XX_INTC_REG(0x38)
+#define IXP23XX_INTR_IRQ_ST4		IXP23XX_INTC_REG(0x3c)
+#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET	0x54
+
+
+/****************************************************************************
+ * GPIO.
+ ****************************************************************************/
+#define IXP23XX_GPIO_REG(x)		((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
+#define IXP23XX_GPIO_GPOUTR		IXP23XX_GPIO_REG(0x00)
+#define IXP23XX_GPIO_GPOER		IXP23XX_GPIO_REG(0x04)
+#define IXP23XX_GPIO_GPINR		IXP23XX_GPIO_REG(0x08)
+#define IXP23XX_GPIO_GPISR		IXP23XX_GPIO_REG(0x0c)
+#define IXP23XX_GPIO_GPIT1R		IXP23XX_GPIO_REG(0x10)
+#define IXP23XX_GPIO_GPIT2R		IXP23XX_GPIO_REG(0x14)
+#define IXP23XX_GPIO_GPCLKR		IXP23XX_GPIO_REG(0x18)
+#define IXP23XX_GPIO_GPDBSELR 		IXP23XX_GPIO_REG(0x1c)
+
+#define IXP23XX_GPIO_STYLE_MASK		0x7
+#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP23XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP23XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP23XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP23XX_GPIO_STYLE_TRANSITIONAL	0x4
+
+#define IXP23XX_GPIO_STYLE_SIZE		3
+
+
+/****************************************************************************
+ * Timer.
+ ****************************************************************************/
+#define IXP23XX_TIMER_REG(x)		((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
+#define IXP23XX_TIMER_CONT		IXP23XX_TIMER_REG(0x00)
+#define IXP23XX_TIMER1_TIMESTAMP	IXP23XX_TIMER_REG(0x04)
+#define IXP23XX_TIMER1_RELOAD		IXP23XX_TIMER_REG(0x08)
+#define IXP23XX_TIMER2_TIMESTAMP	IXP23XX_TIMER_REG(0x0c)
+#define IXP23XX_TIMER2_RELOAD		IXP23XX_TIMER_REG(0x10)
+#define IXP23XX_TIMER_WDOG		IXP23XX_TIMER_REG(0x14)
+#define IXP23XX_TIMER_WDOG_EN		IXP23XX_TIMER_REG(0x18)
+#define IXP23XX_TIMER_WDOG_KEY		IXP23XX_TIMER_REG(0x1c)
+#define IXP23XX_TIMER_WDOG_KEY_MAGIC	0x482e
+#define IXP23XX_TIMER_STATUS		IXP23XX_TIMER_REG(0x20)
+#define IXP23XX_TIMER_SOFT_RESET	IXP23XX_TIMER_REG(0x24)
+#define IXP23XX_TIMER_SOFT_RESET_EN	IXP23XX_TIMER_REG(0x28)
+
+#define IXP23XX_TIMER_ENABLE		(1 << 0)
+#define IXP23XX_TIMER_ONE_SHOT		(1 << 1)
+/* Low order bits of reload value ignored */
+#define IXP23XX_TIMER_RELOAD_MASK	(0x3)
+#define IXP23XX_TIMER_DISABLED		(0x0)
+#define IXP23XX_TIMER1_INT_PEND		(1 << 0)
+#define IXP23XX_TIMER2_INT_PEND		(1 << 1)
+#define IXP23XX_TIMER_STATUS_TS_PEND	(1 << 2)
+#define IXP23XX_TIMER_STATUS_WDOG_PEND	(1 << 3)
+#define IXP23XX_TIMER_STATUS_WARM_RESET	(1 << 4)
+
+
+/****************************************************************************
+ * CAP CSRs.
+ ****************************************************************************/
+#define IXP23XX_GLOBAL_REG(x)		((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
+#define IXP23XX_PRODUCT_ID		IXP23XX_GLOBAL_REG(0x00)
+#define IXP23XX_MISC_CONTROL		IXP23XX_GLOBAL_REG(0x04)
+#define IXP23XX_MSF_CLK_CNTRL		IXP23XX_GLOBAL_REG(0x08)
+#define IXP23XX_RESET0			IXP23XX_GLOBAL_REG(0x0c)
+#define IXP23XX_RESET1			IXP23XX_GLOBAL_REG(0x10)
+#define IXP23XX_STRAP_OPTIONS		IXP23XX_GLOBAL_REG(0x18)
+
+#define IXP23XX_ENABLE_WATCHDOG		(1 << 24)
+#define IXP23XX_SHPC_INIT_COMP		(1 << 21)
+#define IXP23XX_RST_ALL			(1 << 16)
+#define IXP23XX_RESET_PCI		(1 << 2)
+#define IXP23XX_PCI_UNIT_RESET		(1 << 1)
+#define IXP23XX_XSCALE_RESET		(1 << 0)
+
+#define IXP23XX_UENGINE_CSR_VIRT_BASE	(IXP23XX_CAP_CSR_VIRT + 0x18000)
+
+
+/****************************************************************************
+ * PCI CSRs.
+ ****************************************************************************/
+#define IXP23XX_PCI_CREG(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
+#define IXP23XX_PCI_CMDSTAT		IXP23XX_PCI_CREG(0x04)
+#define IXP23XX_PCI_SRAM_BAR		IXP23XX_PCI_CREG(0x14)
+#define IXP23XX_PCI_SDRAM_BAR		IXP23XX_PCI_CREG(0x18)
+
+
+#define IXP23XX_PCI_CSR(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
+#define IXP23XX_PCI_OUT_INT_STATUS	IXP23XX_PCI_CSR(0x0030)
+#define IXP23XX_PCI_OUT_INT_MASK	IXP23XX_PCI_CSR(0x0034)
+#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
+#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
+#define IXP23XX_PCI_CONTROL		IXP23XX_PCI_CSR(0x013c)
+#define IXP23XX_PCI_ADDR_EXT		IXP23XX_PCI_CSR(0x0140)
+#define IXP23XX_PCI_ME_PUSH_STATUS	IXP23XX_PCI_CSR(0x0148)
+#define IXP23XX_PCI_ME_PUSH_EN		IXP23XX_PCI_CSR(0x014c)
+#define IXP23XX_PCI_ERR_STATUS		IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERROR_STATUS	IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERR_ENABLE		IXP23XX_PCI_CSR(0x0154)
+#define IXP23XX_PCI_XSCALE_INT_STATUS	IXP23XX_PCI_CSR(0x0158)
+#define IXP23XX_PCI_XSCALE_INT_ENABLE	IXP23XX_PCI_CSR(0x015c)
+#define IXP23XX_PCI_CPP_ADDR_BITS	IXP23XX_PCI_CSR(0x0160)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
new file mode 100644
index 00000000000..9d40115f7eb
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/memory.h
+ *
+ * Copyright (c) 2003-2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		(0x00000000)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#ifndef __ASSEMBLY__
+
+#define __virt_to_bus(v)						\
+	({ unsigned int ret;						\
+	ret = ((__virt_to_phys(v) - 0x00000000) +			\
+	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
+	ret; })
+
+#define __bus_to_virt(b)						\
+	({ unsigned int data;						\
+	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
+	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+
+#define arch_is_coherent()	1
+
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
new file mode 100644
index 00000000000..db9d9416e5e
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+struct pci_sys_data;
+
+void ixp23xx_map_io(void);
+void ixp23xx_init_irq(void);
+void ixp23xx_sys_init(void);
+int ixp23xx_pci_setup(int, struct pci_sys_data *);
+void ixp23xx_pci_preinit(void);
+struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
+void ixp23xx_pci_slave_init(void);
+
+extern struct sys_timer ixp23xx_timer;
+
+#define IXP23XX_UART_XTAL		14745600
+
+#ifndef __ASSEMBLY__
+/*
+ * Is system memory on the XSI or CPP bus?
+ */
+static inline unsigned ixp23xx_cpp_boot(void)
+{
+	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
+}
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
new file mode 100644
index 00000000000..d57c3fc10f1
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/system.h
+ *
+ * Copyright (C) 2003 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle();
+#endif
+}
+
+static inline void arch_reset(char mode)
+{
+	/* First try machine specific support */
+	if (machine_is_ixdp2351()) {
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+		(void) *IXDP2351_CPLD_RESET1_REG;
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+	}
+
+	/* Use on-chip reset capability */
+	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h
new file mode 100644
index 00000000000..b61dafc884a
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/time.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/time.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h
new file mode 100644
index 00000000000..e341e9cf9c3
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/timex.h
+ *
+ * XScale architecture timex specifications
+ */
+
+#define CLOCK_TICK_RATE 75000000
diff --git a/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
new file mode 100644
index 00000000000..8b4c358d2c0
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/ixp23xx.h>
+#include <linux/serial_reg.h>
+
+#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
+
+static inline void putc(char c)
+{
+	int j;
+
+	for (j = 0; j < 0x1000; j++) {
+		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..dd519f678d1
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * NPU mappings end at 0xf0000000 and we allocate 64MB for board
+ * specific static I/O.
+ */
+
+#define VMALLOC_END	(0xec000000)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index 5c5d4d66dee..b6e0bfa44df 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -34,7 +34,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 227f808dc0e..701d60aa0ef 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -31,8 +31,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 extern int (*external_fault) (unsigned long, struct pt_regs *);
 
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index f0f70ba1e46..6d38d769761 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -33,7 +33,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
@@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 
 static void __init roadrunner_pci_preinit(void)
 {
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp23xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 3f867691d9f..08d65dcdb5f 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -25,15 +25,15 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init avila_pci_preinit(void)
 {
-	set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index e38f45fa58a..797995ce18b 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 64be341109b..192538a0457 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -32,7 +32,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 /*
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3781b3db9f4..58bd2842a6f 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -29,8 +29,8 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch/udc.h>
-#include <asm/hardware.h>
+#include <mach/udc.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
@@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type){
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index ad2e5b97966..efddf01ed17 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -20,15 +20,15 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/pci.h>
 
 void __init coyote_pci_preinit(void)
 {
-	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
-	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 13f8a7ac3ba..aab1954e274 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -19,7 +19,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 9db7e1f4201..926d15f885f 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -25,12 +25,12 @@
 
 void __init dsmg600_pci_preinit(void)
 {
-	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index f19f3f6feda..ca12a9ca083 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -25,9 +25,9 @@
 
 void __init fsg_pci_preinit(void)
 {
-	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 0db3a909ae6..501dfdcc39f 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -64,7 +64,7 @@ static struct platform_device fsg_i2c_gpio = {
 
 static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
 	{
-		I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
@@ -179,7 +179,6 @@ static void __init fsg_init(void)
 {
 	DECLARE_MAC_BUF(mac_buf);
 	uint8_t __iomem *f;
-	int i;
 
 	ixp4xx_sys_init();
 
@@ -228,6 +227,7 @@ static void __init fsg_init(void)
 	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
 	if (f) {
 #ifdef __ARMEB__
+		int i;
 		for (i = 0; i < 6; i++) {
 			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
 			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index 6abf568322d..7e93a0975c4 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -23,14 +23,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init gateway7001_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 37876832e14..59b73a0ddfa 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -22,7 +22,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 49dec786880..7b8a2c32384 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -28,8 +28,8 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/hardware.h>
+#include <mach/gtwx5715.h>
 #include <asm/mach/pci.h>
 
 /*
@@ -41,10 +41,10 @@
  */
 void __init gtwx5715_pci_preinit(void)
 {
-	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index dc6725bda3c..25c21d6665e 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -32,12 +32,12 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/gtwx5715.h>
 
 /*
  * Xscale UART registers are 32 bits wide with only the least
diff --git a/arch/arm/mach-ixp4xx/include/mach/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h
new file mode 100644
index 00000000000..1640cb61972
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/avila.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/avila.h
+ *
+ * Gateworks Avila platform specific definitions
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp425.h
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	AVILA_SDA_PIN		7
+#define	AVILA_SCL_PIN		6
+
+/*
+ * AVILA PCI IRQs
+ */
+#define AVILA_PCI_MAX_DEV	4
+#define LOFT_PCI_MAX_DEV    6
+#define AVILA_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define AVILA_PCI_INTA_PIN	11
+#define AVILA_PCI_INTB_PIN	10
+#define AVILA_PCI_INTC_PIN	9
+#define AVILA_PCI_INTD_PIN	8
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h
new file mode 100644
index 00000000000..717ac6d16f5
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/coyote.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/coyote.h
+ *
+ * ADI Engineering platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define	COYOTE_PCI_SLOT0_PIN	6
+#define	COYOTE_PCI_SLOT1_PIN	11
+
+#define	COYOTE_PCI_SLOT0_DEVID	14
+#define	COYOTE_PCI_SLOT1_DEVID	15
+
+#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
+#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
+#define	COYOTE_IDE_REGION_SIZE	0x1000
+
+#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
+#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
+#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
new file mode 100644
index 00000000000..ff8aa2393bf
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/cpu.h
+ *
+ * IXP4XX cpu type detection
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H__
+#define __ASM_ARCH_CPU_H__
+
+extern unsigned int processor_id;
+/* Processor id value in CP15 Register 0 */
+#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
+#define IXP435_PROCESSOR_ID_VALUE	0x69054040
+#define IXP465_PROCESSOR_ID_VALUE	0x69054200
+#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
+
+#define cpu_is_ixp42x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP425_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP435_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP465_PROCESSOR_ID_VALUE)
+
+static inline u32 ixp4xx_read_feature_bits(void)
+{
+	unsigned int val = ~*IXP4XX_EXP_CFG2;
+	val &= ~IXP4XX_FEATURE_RESERVED;
+	if (!cpu_is_ixp46x())
+		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
+
+	return val;
+}
+
+static inline void ixp4xx_write_feature_bits(u32 value)
+{
+	*IXP4XX_EXP_CFG2 = ~value;
+}
+
+#endif  /* _ASM_ARCH_CPU_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..7c6a6912acd
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx, #0xc8000000
+                movne   \rx, #0xff000000
+		orrne	\rx, \rx, #0x00b00000
+                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
+						@ byte writes used - Big Endian.
+                .endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp4xx/include/mach/dma.h b/arch/arm/mach-ixp4xx/include/mach/dma.h
new file mode 100644
index 00000000000..00c5070c020
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/dma.h
+ *
+ * Copyright (C) 2001-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/device.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
new file mode 100644
index 00000000000..dc087a34a26
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
@@ -0,0 +1,52 @@
+/*
+ * DSM-G600 platform specific definitions
+ *
+ * Copyright (C) 2006 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (C) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define DSMG600_SDA_PIN		5
+#define DSMG600_SCL_PIN		4
+
+/*
+ * DSMG600 PCI IRQs
+ */
+#define DSMG600_PCI_MAX_DEV	4
+#define DSMG600_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define DSMG600_PCI_INTA_PIN	11
+#define DSMG600_PCI_INTB_PIN	10
+#define DSMG600_PCI_INTC_PIN	9
+#define DSMG600_PCI_INTD_PIN	8
+#define DSMG600_PCI_INTE_PIN	7
+#define DSMG600_PCI_INTF_PIN	6
+
+/* DSM-G600 Timer Setting */
+#define DSMG600_FREQ 66000000
+
+/* Buttons */
+
+#define DSMG600_PB_GPIO		15	/* power button */
+#define DSMG600_RB_GPIO		3	/* reset button */
+
+/* Power control */
+
+#define DSMG600_PO_GPIO		2	/* power off */
+
+/* LEDs */
+
+#define DSMG600_LED_PWR_GPIO	0
+#define DSMG600_LED_WLAN_GPIO	14
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..f2e14e94ed1
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP4xx-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get interrupts
+		cmp	\irqstat, #0
+		beq	1001f				@ upper IRQ?
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		sub     \irqnr, \base, \irqnr
+		b	1002f				@ lower IRQ being
+							@ handled
+
+1001:
+		/*
+		 * IXP465/IXP435 has an upper IRQ status register
+		 */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get upper interrupts
+		mov	\irqnr, #63
+		clz	\irqstat, \irqstat
+ 		cmp	\irqstat, #32
+		subne	\irqnr, \irqnr, \irqstat
+#endif
+1002:
+		.endm
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/fsg.h b/arch/arm/mach-ixp4xx/include/mach/fsg.h
new file mode 100644
index 00000000000..1f02b7e22a1
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/fsg.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/fsg.h
+ *
+ * Freecom FSG-3 platform specific definitions
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * Based on coyote.h by
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define FSG_SDA_PIN		12
+#define FSG_SCL_PIN		13
+
+/*
+ * FSG PCI IRQs
+ */
+#define FSG_PCI_MAX_DEV		3
+#define FSG_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN	6
+#define FSG_PCI_INTB_PIN	7
+#define FSG_PCI_INTC_PIN	5
+
+/* Buttons */
+
+#define FSG_SB_GPIO		4	/* sync button */
+#define FSG_RB_GPIO		9	/* reset button */
+#define FSG_UB_GPIO		10	/* usb button */
+
+/* LEDs */
+
+#define FSG_LED_WLAN_BIT	0
+#define FSG_LED_WAN_BIT		1
+#define FSG_LED_SATA_BIT	2
+#define FSG_LED_USB_BIT		4
+#define FSG_LED_RING_BIT	5
+#define FSG_LED_SYNC_BIT	7
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
new file mode 100644
index 00000000000..9fbde177920
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gpio.h
+ *
+ * IXP4XX GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
+ * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_IXP4XX_GPIO_H
+#define __ASM_ARCH_IXP4XX_GPIO_H
+
+#include <mach/hardware.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	return;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	gpio_line_config(gpio, IXP4XX_GPIO_IN);
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
+	return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	int value;
+
+	gpio_line_get(gpio, &value);
+
+	return value;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+#include <asm-generic/gpio.h>			/* cansleep wrappers */
+
+extern int gpio_to_irq(int gpio);
+extern int irq_to_gpio(int gpio);
+
+#endif
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
new file mode 100644
index 00000000000..5d5e201cac7
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
+ *
+ * Gemtek GTWX5715 Gateway (Linksys WRV54G)
+ *
+ * Copyright 2004 (c) George T. Joseph
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+#include "irqs.h"
+
+#define GTWX5715_GPIO0	0
+#define GTWX5715_GPIO1	1
+#define GTWX5715_GPIO2	2
+#define GTWX5715_GPIO3	3
+#define GTWX5715_GPIO4	4
+#define GTWX5715_GPIO5	5
+#define GTWX5715_GPIO6	6
+#define GTWX5715_GPIO7	7
+#define GTWX5715_GPIO8	8
+#define GTWX5715_GPIO9	9
+#define GTWX5715_GPIO10	10
+#define GTWX5715_GPIO11	11
+#define GTWX5715_GPIO12	12
+#define GTWX5715_GPIO13	13
+#define GTWX5715_GPIO14	14
+
+#define GTWX5715_GPIO0_IRQ			IRQ_IXP4XX_GPIO0
+#define GTWX5715_GPIO1_IRQ			IRQ_IXP4XX_GPIO1
+#define GTWX5715_GPIO2_IRQ			IRQ_IXP4XX_GPIO2
+#define GTWX5715_GPIO3_IRQ			IRQ_IXP4XX_GPIO3
+#define GTWX5715_GPIO4_IRQ			IRQ_IXP4XX_GPIO4
+#define GTWX5715_GPIO5_IRQ			IRQ_IXP4XX_GPIO5
+#define GTWX5715_GPIO6_IRQ			IRQ_IXP4XX_GPIO6
+#define GTWX5715_GPIO7_IRQ			IRQ_IXP4XX_GPIO7
+#define GTWX5715_GPIO8_IRQ			IRQ_IXP4XX_GPIO8
+#define GTWX5715_GPIO9_IRQ			IRQ_IXP4XX_GPIO9
+#define GTWX5715_GPIO10_IRQ		IRQ_IXP4XX_GPIO10
+#define GTWX5715_GPIO11_IRQ		IRQ_IXP4XX_GPIO11
+#define GTWX5715_GPIO12_IRQ		IRQ_IXP4XX_GPIO12
+#define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
+#define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
+
+/* PCI controller GPIO to IRQ pin mappings
+
+			INTA	INTB
+SLOT 0	10		11
+SLOT 1	11		10
+
+*/
+
+#define	GTWX5715_PCI_SLOT0_DEVID	0
+#define	GTWX5715_PCI_SLOT0_INTA_GPIO	GTWX5715_GPIO10
+#define	GTWX5715_PCI_SLOT0_INTB_GPIO	GTWX5715_GPIO11
+#define	GTWX5715_PCI_SLOT0_INTA_IRQ	GTWX5715_GPIO10_IRQ
+#define	GTWX5715_PCI_SLOT0_INTB_IRQ	GTWX5715_GPIO11_IRQ
+
+#define	GTWX5715_PCI_SLOT1_DEVID	1
+#define	GTWX5715_PCI_SLOT1_INTA_GPIO	GTWX5715_GPIO11
+#define	GTWX5715_PCI_SLOT1_INTB_GPIO	GTWX5715_GPIO10
+#define	GTWX5715_PCI_SLOT1_INTA_IRQ	GTWX5715_GPIO11_IRQ
+#define	GTWX5715_PCI_SLOT1_INTB_IRQ	GTWX5715_GPIO10_IRQ
+
+#define GTWX5715_PCI_SLOT_COUNT			2
+#define GTWX5715_PCI_INT_PIN_COUNT		2
+
+/*
+ * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
+ * and operate as an SPI type interface.  The details of the interface
+ * are available on Kendin/Micrel's web site.
+ */
+
+#define GTWX5715_KSSPI_SELECT	GTWX5715_GPIO5
+#define GTWX5715_KSSPI_TXD		GTWX5715_GPIO6
+#define GTWX5715_KSSPI_CLOCK	GTWX5715_GPIO7
+#define GTWX5715_KSSPI_RXD		GTWX5715_GPIO12
+
+/*
+ * The "reset" button is wired to GPIO 3.
+ * The GPIO is brought "low" when the button is pushed.
+ */
+
+#define GTWX5715_BUTTON_GPIO	GTWX5715_GPIO3
+#define GTWX5715_BUTTON_IRQ	GTWX5715_GPIO3_IRQ
+
+/*
+ *  Board Label      Front Label
+ *  LED1             Power
+ *  LED2             Wireless-G
+ *  LED3             not populated but could be
+ *  LED4             Internet
+ *  LED5 - LED8      Controlled by KS8995M Switch
+ *  LED9             DMZ
+ */
+
+#define GTWX5715_LED1_GPIO		GTWX5715_GPIO2
+#define GTWX5715_LED2_GPIO		GTWX5715_GPIO9
+#define GTWX5715_LED3_GPIO		GTWX5715_GPIO8
+#define GTWX5715_LED4_GPIO		GTWX5715_GPIO1
+#define GTWX5715_LED9_GPIO		GTWX5715_GPIO4
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
new file mode 100644
index 00000000000..f58a43a2396
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/hardware.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Hardware definitions for IXP4xx based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+#define PCIBIOS_MIN_IO		0x00001000
+#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define	HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses()	1
+
+/* Register locations and bits */
+#include "ixp4xx-regs.h"
+
+#ifndef __ASSEMBLER__
+#include <mach/cpu.h>
+#endif
+
+/* Platform helper functions and definitions */
+#include "platform.h"
+
+/* Platform specific details */
+#include "ixdp425.h"
+#include "avila.h"
+#include "coyote.h"
+#include "prpmc1100.h"
+#include "nslu2.h"
+#include "nas100d.h"
+#include "dsmg600.h"
+#include "fsg.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
new file mode 100644
index 00000000000..319948e31be
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -0,0 +1,569 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/io.h
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002-2005  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <linux/bitops.h>
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff0000
+
+extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
+extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
+
+
+/*
+ * IXP4xx provides two methods of accessing PCI memory space:
+ *
+ * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+ *    To access PCI via this space, we simply ioremap() the BAR
+ *    into the kernel and we can use the standard read[bwl]/write[bwl]
+ *    macros. This is the preffered method due to speed but it
+ *    limits the system to just 64MB of PCI memory. This can be 
+ *    problamatic if using video cards and other memory-heavy
+ *    targets.
+ *
+ * 2) If > 64MB of memory space is required, the IXP4xx can be configured
+ *    to use indirect registers to access PCI (as we do below for I/O
+ *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
+ *    of memory on the bus. The disadvantage of this is that every 
+ *    PCI access requires three local register accesses plus a spinlock,
+ *    but in some cases the performance hit is acceptable. In addition,
+ *    you cannot mmap() PCI devices in this case.
+ *
+ */
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+
+#define __mem_pci(a)		(a)
+
+#else
+
+#include <linux/mm.h>
+
+/*
+ * In the case of using indirect PCI, we simply return the actual PCI
+ * address and our read/write implementation use that to drive the 
+ * access registers. If something outside of PCI is ioremap'd, we
+ * fallback to the default.
+ */
+static inline void __iomem *
+__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
+{
+	if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
+		return __arm_ioremap(addr, size, mtype);
+
+	return (void __iomem *)addr;
+}
+
+static inline void
+__ixp4xx_iounmap(void __iomem *addr)
+{
+	if ((__force u32)addr >= VMALLOC_START)
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(a, s, f)		__ixp4xx_ioremap(a, s, f)
+#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
+
+#define	writeb(v, p)			__ixp4xx_writeb(v, p)
+#define	writew(v, p)			__ixp4xx_writew(v, p)
+#define	writel(v, p)			__ixp4xx_writel(v, p)
+
+#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
+#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
+#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
+	
+#define	readb(p)			__ixp4xx_readb(p)
+#define	readw(p)			__ixp4xx_readw(p)
+#define	readl(p)			__ixp4xx_readl(p)
+	
+#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
+#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
+#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
+
+static inline void 
+__ixp4xx_writeb(u8 value, volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writeb(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
+{
+	while (count--)
+		writeb(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writew(u16 value, volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writew(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
+{
+	while (count--)
+		writew(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writel(u32 value, volatile void __iomem *p)
+{
+	u32 addr = (__force u32)p;
+	if (addr >= VMALLOC_START) {
+		__raw_writel(value, p);
+		return;
+	}
+
+	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
+}
+
+static inline void
+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
+{
+	while (count--)
+		writel(*vaddr++, bus_addr);
+}
+
+static inline unsigned char 
+__ixp4xx_readb(const volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readb(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readb(bus_addr);
+}
+
+static inline unsigned short 
+__ixp4xx_readw(const volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readw(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readw(bus_addr);
+}
+
+static inline unsigned long 
+__ixp4xx_readl(const volatile void __iomem *p)
+{
+	u32 addr = (__force u32)p;
+	u32 data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readl(p);
+
+	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readl(bus_addr);
+}
+
+
+/*
+ * We can use the built-in functions b/c they end up calling writeb/readb
+ */
+#define memset_io(c,v,l)		_memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
+
+#endif
+
+#ifndef CONFIG_PCI
+
+#define	__io(v)		v
+
+#else
+
+/*
+ * IXP4xx does not have a transparent cpu -> PCI I/O translation
+ * window.  Instead, it has a set of registers that must be tweaked
+ * with the proper byte lanes, command types, and address for the
+ * transaction.  This means that we need to override the default
+ * I/O functions.
+ */
+#define	outb(p, v)			__ixp4xx_outb(p, v)
+#define	outw(p, v)			__ixp4xx_outw(p, v)
+#define	outl(p, v)			__ixp4xx_outl(p, v)
+	
+#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
+#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
+#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
+
+#define	inb(p)				__ixp4xx_inb(p)
+#define	inw(p)				__ixp4xx_inw(p)
+#define	inl(p)				__ixp4xx_inl(p)
+
+#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
+#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
+#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
+
+
+static inline void 
+__ixp4xx_outb(u8 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
+{
+	while (count--)
+		outb(*vaddr++, io_addr);
+}
+
+static inline void 
+__ixp4xx_outw(u16 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
+{
+	while (count--)
+		outw(cpu_to_le16(*vaddr++), io_addr);
+}
+
+static inline void 
+__ixp4xx_outl(u32 value, u32 addr)
+{
+	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
+}
+
+static inline void 
+__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
+{
+	while (count--)
+		outl(*vaddr++, io_addr);
+}
+
+static inline u8 
+__ixp4xx_inb(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void 
+__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inb(io_addr);
+}
+
+static inline u16 
+__ixp4xx_inw(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = le16_to_cpu(inw(io_addr));
+}
+
+static inline u32 
+__ixp4xx_inl(u32 addr)
+{
+	u32 data;
+	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inl(io_addr);
+}
+
+#define PIO_OFFSET      0x10000UL
+#define PIO_MASK        0x0ffffUL
+
+#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
+					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
+static inline unsigned int
+__ixp4xx_ioread8(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inb(port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return (unsigned int)__raw_readb(port);
+#else
+		return (unsigned int)__ixp4xx_readb(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insb(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsb(addr, vaddr, count);
+#else
+		__ixp4xx_readsb(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread16(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inw(port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return le16_to_cpu(__raw_readw((u32)port));
+#else
+		return (unsigned int)__ixp4xx_readw(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insw(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsw(addr, vaddr, count);
+#else
+		__ixp4xx_readsw(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread32(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inl(port & PIO_MASK);
+	else {
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return le32_to_cpu((__force __le32)__raw_readl(addr));
+#else
+		return (unsigned int)__ixp4xx_readl(addr);
+#endif
+	}
+}
+
+static inline void
+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insl(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsl(addr, vaddr, count);
+#else
+		__ixp4xx_readsl(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8(u8 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outb(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writeb(value, port);
+#else
+		__ixp4xx_writeb(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsb(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesb(addr, vaddr, count);
+#else
+		__ixp4xx_writesb(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16(u16 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outw(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writew(cpu_to_le16(value), addr);
+#else
+		__ixp4xx_writew(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsw(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesw(addr, vaddr, count);
+#else
+		__ixp4xx_writesw(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32(u32 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outl(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writel((u32 __force)cpu_to_le32(value), addr);
+#else
+		__ixp4xx_writel(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsl(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesl(addr, vaddr, count);
+#else
+		__ixp4xx_writesl(addr, vaddr, count);
+#endif
+}
+
+#define	ioread8(p)			__ixp4xx_ioread8(p)
+#define	ioread16(p)			__ixp4xx_ioread16(p)
+#define	ioread32(p)			__ixp4xx_ioread32(p)
+
+#define	ioread8_rep(p, v, c)		__ixp4xx_ioread8_rep(p, v, c)
+#define	ioread16_rep(p, v, c)		__ixp4xx_ioread16_rep(p, v, c)
+#define	ioread32_rep(p, v, c)		__ixp4xx_ioread32_rep(p, v, c)
+
+#define	iowrite8(v,p)			__ixp4xx_iowrite8(v,p)
+#define	iowrite16(v,p)			__ixp4xx_iowrite16(v,p)
+#define	iowrite32(v,p)			__ixp4xx_iowrite32(v,p)
+
+#define	iowrite8_rep(p, v, c)		__ixp4xx_iowrite8_rep(p, v, c)
+#define	iowrite16_rep(p, v, c)		__ixp4xx_iowrite16_rep(p, v, c)
+#define	iowrite32_rep(p, v, c)		__ixp4xx_iowrite32_rep(p, v, c)
+
+#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
+#define	ioport_unmap(addr)
+#endif	// !CONFIG_PCI
+
+#endif	//  __ASM_ARM_ARCH_IO_H
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h
new file mode 100644
index 00000000000..f4d74de1566
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/irqs.h 
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+
+#define IRQ_IXP4XX_NPEA		0
+#define IRQ_IXP4XX_NPEB		1
+#define IRQ_IXP4XX_NPEC		2
+#define IRQ_IXP4XX_QM1		3
+#define IRQ_IXP4XX_QM2		4
+#define IRQ_IXP4XX_TIMER1	5
+#define IRQ_IXP4XX_GPIO0	6
+#define IRQ_IXP4XX_GPIO1	7
+#define IRQ_IXP4XX_PCI_INT	8
+#define IRQ_IXP4XX_PCI_DMA1	9
+#define IRQ_IXP4XX_PCI_DMA2	10
+#define IRQ_IXP4XX_TIMER2	11
+#define IRQ_IXP4XX_USB		12
+#define IRQ_IXP4XX_UART2	13
+#define IRQ_IXP4XX_TIMESTAMP	14
+#define IRQ_IXP4XX_UART1	15
+#define IRQ_IXP4XX_WDOG		16
+#define IRQ_IXP4XX_AHB_PMU	17
+#define IRQ_IXP4XX_XSCALE_PMU	18
+#define IRQ_IXP4XX_GPIO2	19
+#define IRQ_IXP4XX_GPIO3	20
+#define IRQ_IXP4XX_GPIO4	21
+#define IRQ_IXP4XX_GPIO5	22
+#define IRQ_IXP4XX_GPIO6	23
+#define IRQ_IXP4XX_GPIO7	24
+#define IRQ_IXP4XX_GPIO8	25
+#define IRQ_IXP4XX_GPIO9	26
+#define IRQ_IXP4XX_GPIO10	27
+#define IRQ_IXP4XX_GPIO11	28
+#define IRQ_IXP4XX_GPIO12	29
+#define IRQ_IXP4XX_SW_INT1	30
+#define IRQ_IXP4XX_SW_INT2	31
+#define IRQ_IXP4XX_USB_HOST	32
+#define IRQ_IXP4XX_I2C		33
+#define IRQ_IXP4XX_SSP		34
+#define IRQ_IXP4XX_TSYNC	35
+#define IRQ_IXP4XX_EAU_DONE	36
+#define IRQ_IXP4XX_SHA_DONE	37
+#define IRQ_IXP4XX_SWCP_PE	58
+#define IRQ_IXP4XX_QM_PE	60
+#define IRQ_IXP4XX_MCU_ECC	61
+#define IRQ_IXP4XX_EXP_PE	62
+
+/*
+ * Only first 32 sources are valid if running on IXP42x systems
+ */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+#define NR_IRQS			64
+#else
+#define NR_IRQS			32
+#endif
+
+#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
+
+/*
+ * IXDP425 board IRQs
+ */
+#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * Gateworks Avila board IRQs
+ */
+#define	IRQ_AVILA_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_AVILA_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_AVILA_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_AVILA_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+
+/*
+ * PrPMC1100 Board IRQs
+ */
+#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * ADI Coyote Board IRQs
+ */
+#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
+#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
+#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
+/*
+ * NSLU2 board IRQs
+ */
+#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
+#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
+#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
+
+/*
+ * NAS100D board IRQs
+ */
+#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
+
+/*
+ * D-Link DSM-G600 RevA board IRQs
+ */
+#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
+#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
+
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
+#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
+#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixdp425.h b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
new file mode 100644
index 00000000000..2cafe65ebfe
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/ixdp425.h
+ *
+ * IXDP425 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	IXDP425_SDA_PIN		7
+#define	IXDP425_SCL_PIN		6
+
+/*
+ * IXDP425 PCI IRQs
+ */
+#define IXDP425_PCI_MAX_DEV	4
+#define IXDP425_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define IXDP425_PCI_INTA_PIN	11
+#define IXDP425_PCI_INTB_PIN	10
+#define	IXDP425_PCI_INTC_PIN	9
+#define	IXDP425_PCI_INTD_PIN	8
+
+/* NAND Flash pins */
+#define	IXDP425_NAND_NCE_PIN	12
+
+#define	IXDP425_NAND_CMD_BYTE	0x01
+#define	IXDP425_NAND_ADDR_BYTE	0x02
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
new file mode 100644
index 00000000000..ad9c888dd85
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -0,0 +1,638 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+ *
+ * Register definitions for IXP4xx chipset. This file contains 
+ * register location and bit definitions only. Platform specific 
+ * definitions and helper function declarations are in platform.h 
+ * and machine-name.h.
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_ARM_IXP4XX_H_
+#define _ASM_ARM_IXP4XX_H_
+
+/*
+ * IXP4xx Linux Memory Map:
+ *
+ * Phy		Size		Virt		Description
+ * =========================================================================
+ *
+ * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
+ *
+ * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
+ *
+ * 0x50000000	0x10000000	ioremap'd	EXP BUS
+ *
+ * 0x6000000	0x00004000	ioremap'd	QMgr
+ *
+ * 0xC0000000	0x00001000	0xffbff000	PCI CFG
+ *
+ * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
+ *
+ * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
+ */
+
+/*
+ * Queue Manager
+ */
+#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
+#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
+
+/*
+ * Expansion BUS Configuration registers
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
+#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
+#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * PCI Config registers
+ */
+#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
+#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
+#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * Peripheral space
+ */
+#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
+
+/*
+ * Debug UART
+ *
+ * This is basically a remap of UART1 into a region that is section
+ * aligned so that it * can be used with the low-level debug code.
+ */
+#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
+#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
+#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
+
+#define IXP4XX_EXP_CS0_OFFSET	0x00
+#define IXP4XX_EXP_CS1_OFFSET   0x04
+#define IXP4XX_EXP_CS2_OFFSET   0x08
+#define IXP4XX_EXP_CS3_OFFSET   0x0C
+#define IXP4XX_EXP_CS4_OFFSET   0x10
+#define IXP4XX_EXP_CS5_OFFSET   0x14
+#define IXP4XX_EXP_CS6_OFFSET   0x18
+#define IXP4XX_EXP_CS7_OFFSET   0x1C
+#define IXP4XX_EXP_CFG0_OFFSET	0x20
+#define IXP4XX_EXP_CFG1_OFFSET	0x24
+#define IXP4XX_EXP_CFG2_OFFSET	0x28
+#define IXP4XX_EXP_CFG3_OFFSET	0x2C
+
+/*
+ * Expansion Bus Controller registers.
+ */
+#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+
+#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
+#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
+#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
+#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
+#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
+#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
+#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
+#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
+
+#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
+#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
+#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
+#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
+
+
+/*
+ * Peripheral Space Register Region Base Addresses
+ */
+#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
+#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
+#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
+#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
+#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
+#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
+
+
+#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
+#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
+#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
+#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
+#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
+#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
+#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
+#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
+#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
+
+/*
+ * Constants to make it easy to access  Interrupt Controller registers
+ */
+#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
+#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
+#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
+#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
+#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
+#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
+#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
+
+/*
+ * IXP465-only
+ */
+#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
+#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
+#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
+#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
+#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
+#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
+
+
+/*
+ * Interrupt Controller Register Definitions.
+ */
+
+#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
+
+#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
+#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
+#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
+#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
+#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
+#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
+#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
+#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
+#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
+#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
+#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
+#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
+#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
+#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
+                                                                                
+/*
+ * Constants to make it easy to access GPIO registers
+ */
+#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
+#define IXP4XX_GPIO_GPOER_OFFSET        0x04
+#define IXP4XX_GPIO_GPINR_OFFSET        0x08
+#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
+#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
+#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
+#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
+#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
+
+/* 
+ * GPIO Register Definitions.
+ * [Only perform 32bit reads/writes]
+ */
+#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
+
+#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
+#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
+#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
+#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
+#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
+#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
+#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
+#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
+
+/*
+ * GPIO register bit definitions
+ */
+
+/* Interrupt styles
+ */
+#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
+
+/* 
+ * Mask used to clear interrupt styles 
+ */
+#define IXP4XX_GPIO_STYLE_CLEAR		0x7
+#define IXP4XX_GPIO_STYLE_SIZE		3
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
+#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
+#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
+#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
+#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
+#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
+#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
+#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
+#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
+
+/*
+ * Operating System Timer Register Definitions.
+ */
+
+#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
+
+#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
+#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
+#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
+#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
+#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
+#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
+#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
+#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
+#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
+
+/*
+ * Timer register values and bit definitions 
+ */
+#define IXP4XX_OST_ENABLE		0x00000001
+#define IXP4XX_OST_ONE_SHOT		0x00000002
+/* Low order bits of reload value ignored */
+#define IXP4XX_OST_RELOAD_MASK		0x00000003
+#define IXP4XX_OST_DISABLED		0x00000000
+#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
+#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
+#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
+#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
+#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
+
+#define	IXP4XX_WDT_KEY			0x0000482E
+
+#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
+#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
+#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
+
+
+/*
+ * Constants to make it easy to access PCI Control/Status registers
+ */
+#define PCI_NP_AD_OFFSET            0x00
+#define PCI_NP_CBE_OFFSET           0x04
+#define PCI_NP_WDATA_OFFSET         0x08
+#define PCI_NP_RDATA_OFFSET         0x0c
+#define PCI_CRP_AD_CBE_OFFSET       0x10
+#define PCI_CRP_WDATA_OFFSET        0x14
+#define PCI_CRP_RDATA_OFFSET        0x18
+#define PCI_CSR_OFFSET              0x1c
+#define PCI_ISR_OFFSET              0x20
+#define PCI_INTEN_OFFSET            0x24
+#define PCI_DMACTRL_OFFSET          0x28
+#define PCI_AHBMEMBASE_OFFSET       0x2c
+#define PCI_AHBIOBASE_OFFSET        0x30
+#define PCI_PCIMEMBASE_OFFSET       0x34
+#define PCI_AHBDOORBELL_OFFSET      0x38
+#define PCI_PCIDOORBELL_OFFSET      0x3C
+#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
+#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
+#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
+#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
+#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
+#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
+
+/*
+ * PCI Control/Status Registers
+ */
+#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
+
+#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
+#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+
+/*
+ * PCI register values and bit definitions 
+ */
+
+/* CSR bit definitions */
+#define PCI_CSR_HOST    	0x00000001
+#define PCI_CSR_ARBEN   	0x00000002
+#define PCI_CSR_ADS     	0x00000004
+#define PCI_CSR_PDS     	0x00000008
+#define PCI_CSR_ABE     	0x00000010
+#define PCI_CSR_DBT     	0x00000020
+#define PCI_CSR_ASE     	0x00000100
+#define PCI_CSR_IC      	0x00008000
+
+/* ISR (Interrupt status) Register bit definitions */
+#define PCI_ISR_PSE     	0x00000001
+#define PCI_ISR_PFE     	0x00000002
+#define PCI_ISR_PPE     	0x00000004
+#define PCI_ISR_AHBE    	0x00000008
+#define PCI_ISR_APDC    	0x00000010
+#define PCI_ISR_PADC    	0x00000020
+#define PCI_ISR_ADB     	0x00000040
+#define PCI_ISR_PDB     	0x00000080
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define PCI_INTEN_PSE   	0x00000001
+#define PCI_INTEN_PFE   	0x00000002
+#define PCI_INTEN_PPE   	0x00000004
+#define PCI_INTEN_AHBE  	0x00000008
+#define PCI_INTEN_APDC  	0x00000010
+#define PCI_INTEN_PADC  	0x00000020
+#define PCI_INTEN_ADB   	0x00000040
+#define PCI_INTEN_PDB   	0x00000080
+
+/*
+ * Shift value for byte enable on NP cmd/byte enable register
+ */
+#define IXP4XX_PCI_NP_CBE_BESL		4
+
+/*
+ * PCI commands supported by NP access unit
+ */
+#define NP_CMD_IOREAD			0x2
+#define NP_CMD_IOWRITE			0x3
+#define NP_CMD_CONFIGREAD		0xa
+#define NP_CMD_CONFIGWRITE		0xb
+#define NP_CMD_MEMREAD			0x6
+#define	NP_CMD_MEMWRITE			0x7
+
+/*
+ * Constants for CRP access into local config space
+ */
+#define CRP_AD_CBE_BESL         20
+#define CRP_AD_CBE_WRITE	0x00010000
+
+
+/*
+ * USB Device Controller
+ *
+ * These are used by the USB gadget driver, so they don't follow the
+ * IXP4XX_ naming convetions.
+ *
+ */
+# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
+
+/* UDC Undocumented - Reserved1 */
+#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
+/* UDC Undocumented - Reserved2 */
+#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
+/* UDC Undocumented - Reserved3 */
+#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
+/* UDC Control Register */
+#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
+/* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
+/* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
+/* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
+/* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
+/* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
+/* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
+/* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
+/* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
+/* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
+/* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
+/* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
+/* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
+/* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
+/* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
+/* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
+/* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
+/* UDC Frame Number Register High */
+#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
+/* UDC Frame Number Register Low */
+#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
+/* UDC Byte Count Reg 2 */
+#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
+/* UDC Byte Count Reg 4 */
+#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
+/* UDC Byte Count Reg 7 */
+#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
+/* UDC Byte Count Reg 9 */
+#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
+/* UDC Byte Count Reg 12 */
+#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
+/* UDC Byte Count Reg 14 */
+#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
+/* UDC Endpoint 0 Data Register */
+#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
+/* UDC Endpoint 1 Data Register */
+#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
+/* UDC Endpoint 2 Data Register */
+#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
+/* UDC Endpoint 3 Data Register */
+#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
+/* UDC Endpoint 4 Data Register */
+#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
+/* UDC Endpoint 5 Data Register */
+#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
+/* UDC Endpoint 6 Data Register */
+#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
+/* UDC Endpoint 7 Data Register */
+#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
+/* UDC Endpoint 8 Data Register */
+#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
+/* UDC Endpoint 9 Data Register */
+#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
+/* UDC Endpoint 10 Data Register */
+#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
+/* UDC Endpoint 11 Data Register */
+#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
+/* UDC Endpoint 12 Data Register */
+#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
+/* UDC Endpoint 13 Data Register */
+#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
+/* UDC Endpoint 14 Data Register */
+#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
+/* UDC Endpoint 15 Data Register */
+#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
+/* UDC Interrupt Control Register 0 */
+#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
+/* UDC Interrupt Control Register 1 */
+#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
+/* UDC Status Interrupt Register 0 */
+#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
+/* UDC Status Interrupt Register 1 */
+#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
+
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/* "fuse" bits of IXP_EXP_CFG2 */
+#define IXP4XX_FEATURE_RCOMP		(1 << 0)
+#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
+#define IXP4XX_FEATURE_HASH		(1 << 2)
+#define IXP4XX_FEATURE_AES		(1 << 3)
+#define IXP4XX_FEATURE_DES		(1 << 4)
+#define IXP4XX_FEATURE_HDLC		(1 << 5)
+#define IXP4XX_FEATURE_AAL		(1 << 6)
+#define IXP4XX_FEATURE_HSS		(1 << 7)
+#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
+#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
+#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
+#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
+#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
+#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
+#define IXP4XX_FEATURE_PCI		(1 << 14)
+#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
+#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
+#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
+#define IXP4XX_FEATURE_RSA		(1 << 21)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
+#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
+
+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
+				    IXP4XX_FEATURE_USB_HOST |		\
+				    IXP4XX_FEATURE_NPEA_ETH |		\
+				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
+				    IXP4XX_FEATURE_RSA |		\
+				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
new file mode 100644
index 00000000000..c4d2830ac98
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/memory.h
+ *
+ * Copyright (c) 2001-2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
+
+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	ixp4xx_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (SZ_64M - 1)
+
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * These are dummies for now.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/nas100d.h b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
new file mode 100644
index 00000000000..3771d62a974
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/nas100d.h
+ *
+ * NAS100D platform specific definitions
+ *
+ * Copyright (c) 2005 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define NAS100D_SDA_PIN		5
+#define NAS100D_SCL_PIN		6
+
+/*
+ * NAS100D PCI IRQs
+ */
+#define NAS100D_PCI_MAX_DEV	3
+#define NAS100D_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NAS100D_PCI_INTA_PIN	11
+#define NAS100D_PCI_INTB_PIN	10
+#define NAS100D_PCI_INTC_PIN	9
+#define NAS100D_PCI_INTD_PIN	8
+#define NAS100D_PCI_INTE_PIN	7
+
+/* Buttons */
+
+#define NAS100D_PB_GPIO         14   /* power button */
+#define NAS100D_RB_GPIO         4    /* reset button */
+
+/* Power control */
+
+#define NAS100D_PO_GPIO         12   /* power off */
+
+/* LEDs */
+
+#define NAS100D_LED_WLAN_GPIO	0
+#define NAS100D_LED_DISK_GPIO	3
+#define NAS100D_LED_PWR_GPIO	15
diff --git a/arch/arm/mach-ixp4xx/include/mach/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h
new file mode 100644
index 00000000000..37d0511689d
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -0,0 +1,39 @@
+#ifndef __IXP4XX_NPE_H
+#define __IXP4XX_NPE_H
+
+#include <linux/kernel.h>
+
+extern const char *npe_names[];
+
+struct npe_regs {
+	u32 exec_addr, exec_data, exec_status_cmd, exec_count;
+	u32 action_points[4];
+	u32 watchpoint_fifo, watch_count;
+	u32 profile_count;
+	u32 messaging_status, messaging_control;
+	u32 mailbox_status, /*messaging_*/ in_out_fifo;
+};
+
+struct npe {
+	struct resource *mem_res;
+	struct npe_regs __iomem *regs;
+	u32 regs_phys;
+	int id;
+	int valid;
+};
+
+
+static inline const char *npe_name(struct npe *npe)
+{
+	return npe_names[npe->id];
+}
+
+int npe_running(struct npe *npe);
+int npe_send_message(struct npe *npe, const void *msg, const char *what);
+int npe_recv_message(struct npe *npe, void *msg, const char *what);
+int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
+struct npe *npe_request(int id);
+void npe_release(struct npe *npe);
+
+#endif /* __IXP4XX_NPE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/nslu2.h b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
new file mode 100644
index 00000000000..85d00adbfb9
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/nslu2.h
+ *
+ * NSLU2 platform specific definitions
+ *
+ * Author: Mark Rakes <mrakes AT mac.com>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define NSLU2_SDA_PIN		7
+#define NSLU2_SCL_PIN		6
+
+/*
+ * NSLU2 PCI IRQs
+ */
+#define NSLU2_PCI_MAX_DEV	3
+#define NSLU2_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NSLU2_PCI_INTA_PIN	11
+#define NSLU2_PCI_INTB_PIN	10
+#define NSLU2_PCI_INTC_PIN	9
+#define NSLU2_PCI_INTD_PIN	8
+
+/* NSLU2 Timer */
+#define NSLU2_FREQ 66000000
+
+/* Buttons */
+
+#define NSLU2_PB_GPIO		5	/* power button */
+#define NSLU2_PO_GPIO		8	/* power off */
+#define NSLU2_RB_GPIO		12	/* reset button */
+
+/* Buzzer */
+
+#define NSLU2_GPIO_BUZZ		4
+
+/* LEDs */
+
+#define NSLU2_LED_RED_GPIO	0
+#define NSLU2_LED_GRN_GPIO	1
+#define NSLU2_LED_DISK1_GPIO	3
+#define NSLU2_LED_DISK2_GPIO	2
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
new file mode 100644
index 00000000000..e824c02c825
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/platform.h
+ *
+ * Constants and functions that are useful to IXP4xx platform-specific code
+ * and device drivers.
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#ifndef	__ARMEB__
+#define	REG_OFFSET	0
+#else
+#define	REG_OFFSET	3
+#endif
+
+/*
+ * Expansion bus memory regions
+ */
+#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
+
+/*
+ * The expansion bus on the IXP4xx can be configured for either 16 or
+ * 32MB windows and the CS offset for each region changes based on the
+ * current configuration. This means that we cannot simply hardcode
+ * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
+ * as setup by the bootloader to determine our window size.
+ */
+extern unsigned long ixp4xx_exp_bus_size;
+
+#define	IXP4XX_EXP_BUS_BASE(region)\
+		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
+
+#define IXP4XX_EXP_BUS_END(region)\
+		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
+
+/* Those macros can be used to adjust timing and configure
+ * other features for each region.
+ */
+
+#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
+#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
+#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
+#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
+#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
+#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
+#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
+
+#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
+#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
+#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
+#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
+#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
+#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
+#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
+
+#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
+#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
+#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
+
+#define IXP4XX_FLASH_WRITABLE	(0x2)
+#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
+#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
+#define IXP4XX_UART_XTAL        	14745600
+
+/*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+ * passed as platform_data.
+ */
+struct ixp4xx_pata_data {
+	volatile u32	*cs0_cfg;
+	volatile u32	*cs1_cfg;
+	unsigned long	cs0_bits;
+	unsigned long	cs1_bits;
+	void __iomem	*cs0;
+	void __iomem	*cs1;
+};
+
+struct sys_timer;
+
+#define IXP4XX_ETH_NPEA		0x00
+#define IXP4XX_ETH_NPEB		0x10
+#define IXP4XX_ETH_NPEC		0x20
+
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+	u8 phy;		/* MII PHY ID, 0 - 31 */
+	u8 rxq;		/* configurable, currently 0 - 31 only */
+	u8 txreadyq;
+	u8 hwaddr[6];
+};
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+	int (*set_clock)(int port, unsigned int clock_type);
+	int (*open)(int port, void *pdev,
+		    void (*set_carrier_cb)(void *pdev, int carrier));
+	void (*close)(int port, void *pdev);
+	u8 txreadyq;
+};
+
+/*
+ * Frequency of clock used for primary clocksource
+ */
+extern unsigned long ixp4xx_timer_freq;
+
+/*
+ * Functions used by platform-level setup code
+ */
+extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_irq(void);
+extern void ixp4xx_sys_init(void);
+extern void ixp4xx_timer_init(void);
+extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_pci_preinit(void);
+struct pci_sys_data;
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW			0
+#define IXP4XX_GPIO_HIGH		1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+static inline void gpio_line_config(u8 line, u32 direction)
+{
+	if (direction == IXP4XX_GPIO_IN)
+		*IXP4XX_GPIO_GPOER |= (1 << line);
+	else
+		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static inline void gpio_line_get(u8 line, int *value)
+{
+	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static inline void gpio_line_set(u8 line, int value)
+{
+	if (value == IXP4XX_GPIO_HIGH)
+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+	else if (value == IXP4XX_GPIO_LOW)
+	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
+
+#endif // __ASSEMBLY__
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
new file mode 100644
index 00000000000..17274a2e3de
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
+ *
+ * Motorolla PrPMC1100 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define	PRPMC1100_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define	PRPMC1100_PCI_MIN_DEVID	10
+#define	PRPMC1100_PCI_MAX_DEVID	16
+#define	PRPMC1100_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define PRPMC1100_PCI_INTA_PIN	11
+#define PRPMC1100_PCI_INTB_PIN	10
+#define	PRPMC1100_PCI_INTC_PIN	9
+#define	PRPMC1100_PCI_INTD_PIN	8
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
new file mode 100644
index 00000000000..1e52b95cede
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef IXP4XX_QMGR_H
+#define IXP4XX_QMGR_H
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#define HALF_QUEUES	32
+#define QUEUES		64	/* only 32 lower queues currently supported */
+#define MAX_QUEUE_LENGTH 4	/* in dwords */
+
+#define QUEUE_STAT1_EMPTY		1 /* queue status bits */
+#define QUEUE_STAT1_NEARLY_EMPTY	2
+#define QUEUE_STAT1_NEARLY_FULL		4
+#define QUEUE_STAT1_FULL		8
+#define QUEUE_STAT2_UNDERFLOW		1
+#define QUEUE_STAT2_OVERFLOW		2
+
+#define QUEUE_WATERMARK_0_ENTRIES	0
+#define QUEUE_WATERMARK_1_ENTRY		1
+#define QUEUE_WATERMARK_2_ENTRIES	2
+#define QUEUE_WATERMARK_4_ENTRIES	3
+#define QUEUE_WATERMARK_8_ENTRIES	4
+#define QUEUE_WATERMARK_16_ENTRIES	5
+#define QUEUE_WATERMARK_32_ENTRIES	6
+#define QUEUE_WATERMARK_64_ENTRIES	7
+
+/* queue interrupt request conditions */
+#define QUEUE_IRQ_SRC_EMPTY		0
+#define QUEUE_IRQ_SRC_NEARLY_EMPTY	1
+#define QUEUE_IRQ_SRC_NEARLY_FULL	2
+#define QUEUE_IRQ_SRC_FULL		3
+#define QUEUE_IRQ_SRC_NOT_EMPTY		4
+#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY	5
+#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL	6
+#define QUEUE_IRQ_SRC_NOT_FULL		7
+
+struct qmgr_regs {
+	u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
+	u32 stat1[4];		/* 0x400 - 0x40F */
+	u32 stat2[2];		/* 0x410 - 0x417 */
+	u32 statne_h;		/* 0x418 - queue nearly empty */
+	u32 statf_h;		/* 0x41C - queue full */
+	u32 irqsrc[4];		/* 0x420 - 0x42F IRC source */
+	u32 irqen[2];		/* 0x430 - 0x437 IRQ enabled */
+	u32 irqstat[2];		/* 0x438 - 0x43F - IRQ access only */
+	u32 reserved[1776];
+	u32 sram[2048];		/* 0x2000 - 0x3FFF - config and buffer */
+};
+
+void qmgr_set_irq(unsigned int queue, int src,
+		  void (*handler)(void *pdev), void *pdev);
+void qmgr_enable_irq(unsigned int queue);
+void qmgr_disable_irq(unsigned int queue);
+
+/* request_ and release_queue() must be called from non-IRQ context */
+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
+		       unsigned int nearly_empty_watermark,
+		       unsigned int nearly_full_watermark);
+void qmgr_release_queue(unsigned int queue);
+
+
+static inline void qmgr_put_entry(unsigned int queue, u32 val)
+{
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	__raw_writel(val, &qmgr_regs->acc[queue][0]);
+}
+
+static inline u32 qmgr_get_entry(unsigned int queue)
+{
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	return __raw_readl(&qmgr_regs->acc[queue][0]);
+}
+
+static inline int qmgr_get_stat1(unsigned int queue)
+{
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
+		>> ((queue & 7) << 2)) & 0xF;
+}
+
+static inline int qmgr_get_stat2(unsigned int queue)
+{
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
+		>> ((queue & 0xF) << 1)) & 0x3;
+}
+
+static inline int qmgr_stat_empty(unsigned int queue)
+{
+	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+}
+
+static inline int qmgr_stat_nearly_empty(unsigned int queue)
+{
+	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+}
+
+static inline int qmgr_stat_nearly_full(unsigned int queue)
+{
+	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+}
+
+static inline int qmgr_stat_full(unsigned int queue)
+{
+	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+}
+
+static inline int qmgr_stat_underflow(unsigned int queue)
+{
+	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+}
+
+static inline int qmgr_stat_overflow(unsigned int queue)
+{
+	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+}
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
new file mode 100644
index 00000000000..92a7e8ddf69
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle(0);
+#endif
+}
+
+
+static inline void arch_reset(char mode)
+{
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+
+		/* set the "key" register to enable access to
+		 * "timer" and "enable" registers
+		 */
+		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+		/* write 0 to the timer register for an immediate reset */
+		*IXP4XX_OSWT = 0;
+
+		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+	}
+}
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
new file mode 100644
index 00000000000..89ce3ee8469
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/timex.h
+ * 
+ */
+
+#include <mach/hardware.h>
+
+/*
+ * We use IXP425 General purpose timer for our timer needs, it runs at 
+ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+ * timer register ignores the bottom 2 bits of the LATCH value.
+ */
+#define FREQ 66666666
+#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
new file mode 100644
index 00000000000..80d6da2eafa
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
new file mode 100644
index 00000000000..2db0078a8cf
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_UNCOMPRESS_H_
+#define _ARCH_UNCOMPRESS_H_
+
+#include "ixp4xx-regs.h"
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static volatile u32* uart_base;
+
+static inline void putc(int c)
+{
+	/* Check THRE and TEMT bits before we transmit the character.
+	 */
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+
+	*uart_base = c;
+}
+
+static void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	/*
+	 * Some boards are using UART2 as console
+	 */
+	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+			 machine_is_gateway7001() || machine_is_wg302v2())
+		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+	else
+		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+}
+
+/*
+ * arch_id is a variable in decompress_kernel()
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..7b3580b53ad
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xFF000000)
+
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 40879600481..64c29aacaac 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -22,15 +22,15 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init ixdp425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 44584afb34a..9b2d2ec14c8 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -24,7 +24,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index d1e75b7dc3b..4ed7ac61492 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -19,14 +19,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init ixdpg425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 63a23fa4aab..c73a94d0ca2 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/arch/npe.h>
+#include <mach/npe.h>
 
 #define DEBUG_MSG			0
 #define DEBUG_FW			0
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index fab94eaecee..c6cb069a5a8 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -12,7 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/arch/qmgr.h>
+#include <mach/qmgr.h>
 
 #define DEBUG		0
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index b8ebaf4a9c8..1088426fdce 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -24,11 +24,11 @@
 
 void __init nas100d_pci_preinit(void)
 {
-	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 04661fef97f..4429b8448b6 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -24,9 +24,9 @@
 
 void __init nslu2_pci_preinit(void)
 {
-	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 6588f2c758e..9b59ed03b15 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -23,14 +23,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init wg302v2_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index f7e09ad804e..7ea782021d1 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index a39f0f3c473..c79f492072f 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5938a3b33cd..189f16f3619 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -15,15 +15,17 @@
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
 #include <asm/page.h>
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/kirkwood.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -196,6 +198,37 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 
 
 /*****************************************************************************
+ * SPI
+ ****************************************************************************/
+static struct orion_spi_info kirkwood_spi_plat_data = {
+	.tclk		= KIRKWOOD_TCLK,
+};
+
+static struct resource kirkwood_spi_resources[] = {
+	{
+		.start	= SPI_PHYS_BASE,
+		.end	= SPI_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_spi = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.resource	= kirkwood_spi_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_spi_plat_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_spi_resources),
+};
+
+void __init kirkwood_spi_init()
+{
+	platform_device_register(&kirkwood_spi);
+}
+
+
+/*****************************************************************************
  * UART0
  ****************************************************************************/
 static struct plat_serial8250_port kirkwood_uart0_data[] = {
@@ -284,6 +317,212 @@ void __init kirkwood_uart1_init(void)
 
 
 /*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
+	.dram		= &kirkwood_mbus_dram_info,
+};
+
+static u64 kirkwood_xor_dmamask = DMA_32BIT_MASK;
+
+
+/*****************************************************************************
+ * XOR0
+ ****************************************************************************/
+static struct resource kirkwood_xor0_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= XOR0_PHYS_BASE,
+		.end	= XOR0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= XOR0_HIGH_PHYS_BASE,
+		.end	= XOR0_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_xor0_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data = &kirkwood_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_xor0_shared_resources),
+	.resource	= kirkwood_xor0_shared_resources,
+};
+
+static struct resource kirkwood_xor00_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_00,
+		.end	= IRQ_KIRKWOOD_XOR_00,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor00_data = {
+	.shared		= &kirkwood_xor0_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor00_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor00_resources),
+	.resource	= kirkwood_xor00_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor00_data,
+	},
+};
+
+static struct resource kirkwood_xor01_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_01,
+		.end	= IRQ_KIRKWOOD_XOR_01,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor01_data = {
+	.shared		= &kirkwood_xor0_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor01_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor01_resources),
+	.resource	= kirkwood_xor01_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor01_data,
+	},
+};
+
+void __init kirkwood_xor0_init(void)
+{
+	platform_device_register(&kirkwood_xor0_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor00_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor00_data.cap_mask);
+	platform_device_register(&kirkwood_xor00_channel);
+
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor01_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, kirkwood_xor01_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor01_data.cap_mask);
+	platform_device_register(&kirkwood_xor01_channel);
+}
+
+
+/*****************************************************************************
+ * XOR1
+ ****************************************************************************/
+static struct resource kirkwood_xor1_shared_resources[] = {
+	{
+		.name	= "xor 1 low",
+		.start	= XOR1_PHYS_BASE,
+		.end	= XOR1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 1 high",
+		.start	= XOR1_HIGH_PHYS_BASE,
+		.end	= XOR1_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_xor1_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data = &kirkwood_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(kirkwood_xor1_shared_resources),
+	.resource	= kirkwood_xor1_shared_resources,
+};
+
+static struct resource kirkwood_xor10_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_10,
+		.end	= IRQ_KIRKWOOD_XOR_10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor10_data = {
+	.shared		= &kirkwood_xor1_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor10_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor10_resources),
+	.resource	= kirkwood_xor10_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor10_data,
+	},
+};
+
+static struct resource kirkwood_xor11_resources[] = {
+	[0] = {
+		.start	= IRQ_KIRKWOOD_XOR_11,
+		.end	= IRQ_KIRKWOOD_XOR_11,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data kirkwood_xor11_data = {
+	.shared		= &kirkwood_xor1_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor11_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(kirkwood_xor11_resources),
+	.resource	= kirkwood_xor11_resources,
+	.dev		= {
+		.dma_mask		= &kirkwood_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&kirkwood_xor11_data,
+	},
+};
+
+void __init kirkwood_xor1_init(void)
+{
+	platform_device_register(&kirkwood_xor1_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor10_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor10_data.cap_mask);
+	platform_device_register(&kirkwood_xor10_channel);
+
+	dma_cap_set(DMA_MEMCPY, kirkwood_xor11_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, kirkwood_xor11_data.cap_mask);
+	dma_cap_set(DMA_XOR, kirkwood_xor11_data.cap_mask);
+	platform_device_register(&kirkwood_xor11_channel);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 static void kirkwood_timer_init(void)
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5dee2f6b40a..69cd113af03 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -33,8 +33,11 @@ void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_pcie_init(void);
 void kirkwood_rtc_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_spi_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
 
 extern struct sys_timer kirkwood_timer;
 
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d5c482c628e..610fb24d8ae 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
new file mode 100644
index 00000000000..c0cc5b5c82a
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/kirkwood.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
+	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-kirkwood/include/mach/dma.h b/arch/arm/mach-kirkwood/include/mach/dma.h
new file mode 100644
index 00000000000..40a8c178f10
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
new file mode 100644
index 00000000000..83e0cba77b3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/kirkwood.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
+
+	@ if no low interrupts set, check high interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	mov	\irqnr, #63
+	ands	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+1001:	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
new file mode 100644
index 00000000000..cde85283f7d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
new file mode 100644
index 00000000000..be07be0ef52
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "kirkwood.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
new file mode 100644
index 00000000000..6fd05838c72
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "kirkwood.h"	/* need GPIO_MAX */
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM	0
+#define IRQ_KIRKWOOD_BRIDGE	1
+#define IRQ_KIRKWOOD_HOST2CPU	2
+#define IRQ_KIRKWOOD_CPU2HOST	3
+#define IRQ_KIRKWOOD_XOR_00	5
+#define IRQ_KIRKWOOD_XOR_01	6
+#define IRQ_KIRKWOOD_XOR_10	7
+#define IRQ_KIRKWOOD_XOR_11	8
+#define IRQ_KIRKWOOD_PCIE	9
+#define IRQ_KIRKWOOD_GE00_SUM	11
+#define IRQ_KIRKWOOD_GE01_SUM	15
+#define IRQ_KIRKWOOD_USB	19
+#define IRQ_KIRKWOOD_SATA	21
+#define IRQ_KIRKWOOD_CRYPTO	22
+#define IRQ_KIRKWOOD_SPI	23
+#define IRQ_KIRKWOOD_I2S	24
+#define IRQ_KIRKWOOD_TS_0	26
+#define IRQ_KIRKWOOD_SDIO	28
+#define IRQ_KIRKWOOD_TWSI	29
+#define IRQ_KIRKWOOD_AVB	30
+#define IRQ_KIRKWOOD_TDMI	31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0	33
+#define IRQ_KIRKWOOD_UART_1	34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START	64
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
new file mode 100644
index 00000000000..5c69992295e
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ *  88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000	PCIe Memory space
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe I/O space
+ * f3000000	NAND controller address window
+ *
+ * virt		phys		size
+ * fee00000	f1000000	1M	on-chip peripheral registers
+ * fef00000	f2000000	1M	PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
+						* is the minimal window size
+						*/
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
+#define KIRKWOOD_REGS_SIZE		SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define   CPU_RESET		0x00000002
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF	0x0000
+#define   IRQ_MASK_LOW_OFF	0x0004
+#define   IRQ_CAUSE_HIGH_OFF	0x0010
+#define   IRQ_MASK_HIGH_OFF	0x0014
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define   L2_WRITETHROUGH	0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60800)
+#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60800)
+#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60900)
+#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60900)
+#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
+#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
+#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
+#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
+
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX		50
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
new file mode 100644
index 00000000000..b5fb34bdccd
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
new file mode 100644
index 00000000000..8510f6cfdab
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/kirkwood.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
new file mode 100644
index 00000000000..f77ef4a32c5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define KIRKWOOD_TCLK		166666667
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
new file mode 100644
index 00000000000..75d5497df3a
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
new file mode 100644
index 00000000000..8f48260dcda
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 302bb2cf666..5790643ffe0 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init kirkwood_init_irq(void)
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 8282d0ff84b..2195fa31f6b 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6cf642c504d..a3012d44597 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -18,10 +18,13 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 #define RD88F6192_GPIO_USB_VBUS		10
@@ -34,6 +37,21 @@ static struct mv_sata_platform_data rd88f6192_sata_data = {
 	.n_ports	= 2,
 };
 
+static const struct flash_platform_data rd88F6192_spi_slave_data = {
+	.type		= "m25p128",
+};
+
+static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &rd88F6192_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
 static void __init rd88f6192_init(void)
 {
 	/*
@@ -45,7 +63,12 @@ static void __init rd88f6192_init(void)
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6192_sata_data);
+	spi_register_board_info(rd88F6192_spi_slave_info,
+				ARRAY_SIZE(rd88F6192_spi_slave_info));
+	kirkwood_spi_init();
 	kirkwood_uart0_init();
+	kirkwood_xor0_init();
+	kirkwood_xor1_init();
 }
 
 static int __init rd88f6192_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index e1f8de2c74a..d96487a0f18 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -18,11 +18,12 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/kirkwood.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 
 static struct mtd_partition rd88f6281_nand_parts[] = {
@@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = {
 
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv_sata_platform_data rd88f6281_sata_data = {
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 05ac2bd0402..0468e93b7d3 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -18,7 +18,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/devices.h>
+#include <mach/devices.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index 407d255e42b..c6c08e80023 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -25,13 +25,13 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-sys.h>
-#include <asm/arch/regs-misc.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-misc.h>
 
 
 static struct __initdata map_desc ks8695_io_desc[] = {
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 3db2ec61d06..4bd251482c8 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -22,9 +22,9 @@
 
 #include <linux/platform_device.h>
 
-#include <asm/arch/regs-wan.h>
-#include <asm/arch/regs-lan.h>
-#include <asm/arch/regs-hpna.h>
+#include <mach/regs-wan.h>
+#include <mach/regs-lan.h>
+#include <mach/regs-hpna.h>
 
 
 /* --------------------------------------------------------------------
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index 5e46191c0af..3624e65cd89 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio.h>
 
 /*
  * Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
new file mode 100644
index 00000000000..3782c355949
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-uart.h>
+
+	.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =KS8695_UART_PA		@ physical base address
+		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
+	.endm
+
+	.macro	senduart, rd, rx
+		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
+		beq	1001b
+	.endm
+
+	.macro	waituart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
+		beq	1001b
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
new file mode 100644
index 00000000000..2744fecb429
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/devices.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H
+#define __ASM_ARCH_DEVICES_H
+
+#include <linux/pci.h>
+
+ /* Ethernet */
+extern void __init ks8695_add_device_wan(void);
+extern void __init ks8695_add_device_lan(void);
+extern void __init ks8695_add_device_hpna(void);
+
+ /* LEDs */
+extern short ks8695_leds_cpu;
+extern short ks8695_leds_timer;
+extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
+
+ /* PCI */
+#define KS8695_MODE_PCI		0
+#define KS8695_MODE_MINIPCI	1
+#define KS8695_MODE_CARDBUS	2
+
+struct ks8695_pci_cfg {
+	short mode;
+	int (*map_irq)(struct pci_dev *, u8, u8);
+};
+extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
new file mode 100644
index 00000000000..56120628008
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/dma.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/dma.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
new file mode 100644
index 00000000000..b4fe0c11c6c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * Low-level IRQ helper macros for KS8695
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
+
+		teq	\irqstat, #0
+		beq	1001f
+
+		mov	\irqnr, #0
+
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
new file mode 100644
index 00000000000..73c84168761
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/gpio.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H_
+#define __ASM_ARCH_GPIO_H_
+
+#define KS8695_GPIO_0		0
+#define KS8695_GPIO_1		1
+#define KS8695_GPIO_2		2
+#define KS8695_GPIO_3		3
+#define KS8695_GPIO_4		4
+#define KS8695_GPIO_5		5
+#define KS8695_GPIO_6		6
+#define KS8695_GPIO_7		7
+#define KS8695_GPIO_8		8
+#define KS8695_GPIO_9		9
+#define KS8695_GPIO_10		10
+#define KS8695_GPIO_11		11
+#define KS8695_GPIO_12		12
+#define KS8695_GPIO_13		13
+#define KS8695_GPIO_14		14
+#define KS8695_GPIO_15		15
+
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/*
+ * Configure the GPIO line as an input.
+ */
+int __init_or_module gpio_direction_input(unsigned int pin);
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
+
+/*
+ * Set the state of an output GPIO line.
+ */
+void gpio_set_value(unsigned int pin, unsigned int state);
+
+/*
+ * Read the state of a GPIO line.
+ */
+int gpio_get_value(unsigned int pin);
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+int gpio_to_irq(unsigned int pin);
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq);
+
+
+#include <asm-generic/gpio.h>
+
+static inline int gpio_request(unsigned int pin, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned int pin)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
new file mode 100644
index 00000000000..1d640d075b7
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Memory Map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical RAM address.
+ */
+#define KS8695_SDRAM_PA		0x00000000
+
+
+/*
+ * We map an entire MiB with the System Configuration Registers in even
+ * though only 64KiB is needed. This makes it easier for use with the
+ * head debug code as the initial MMU setup only deals in L1 sections.
+ */
+#define KS8695_IO_PA		0x03F00000
+#define KS8695_IO_VA		0xF0000000
+#define KS8695_IO_SIZE		SZ_1M
+
+#define KS8695_PCIMEM_PA	0x60000000
+#define KS8695_PCIMEM_SIZE	SZ_512M
+
+#define KS8695_PCIIO_PA		0x80000000
+#define KS8695_PCIIO_SIZE	SZ_64K
+
+
+/*
+ * PCI support
+ */
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h
new file mode 100644
index 00000000000..f364f24ffe1
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/io.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
new file mode 100644
index 00000000000..86fc9e6ce40
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/irqs.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/irqs.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define NR_IRQS				32
+
+/*
+ * IRQ definitions
+ */
+#define KS8695_IRQ_COMM_RX		0
+#define KS8695_IRQ_COMM_TX		1
+#define KS8695_IRQ_EXTERN0		2
+#define KS8695_IRQ_EXTERN1		3
+#define KS8695_IRQ_EXTERN2		4
+#define KS8695_IRQ_EXTERN3		5
+#define KS8695_IRQ_TIMER0		6
+#define KS8695_IRQ_TIMER1		7
+#define KS8695_IRQ_UART_TX		8
+#define KS8695_IRQ_UART_RX		9
+#define KS8695_IRQ_UART_LINE_STATUS	10
+#define KS8695_IRQ_UART_MODEM_STATUS	11
+#define KS8695_IRQ_LAN_RX_STOP		12
+#define KS8695_IRQ_LAN_TX_STOP		13
+#define KS8695_IRQ_LAN_RX_BUF		14
+#define KS8695_IRQ_LAN_TX_BUF		15
+#define KS8695_IRQ_LAN_RX_STATUS	16
+#define KS8695_IRQ_LAN_TX_STATUS	17
+#define KS8695_IRQ_HPNA_RX_STOP		18
+#define KS8695_IRQ_HPNA_TX_STOP		19
+#define KS8695_IRQ_HPNA_RX_BUF		20
+#define KS8695_IRQ_HPNA_TX_BUF		21
+#define KS8695_IRQ_HPNA_RX_STATUS	22
+#define KS8695_IRQ_HPNA_TX_STATUS	23
+#define KS8695_IRQ_BUS_ERROR		24
+#define KS8695_IRQ_WAN_RX_STOP		25
+#define KS8695_IRQ_WAN_TX_STOP		26
+#define KS8695_IRQ_WAN_RX_BUF		27
+#define KS8695_IRQ_WAN_TX_BUF		28
+#define KS8695_IRQ_WAN_RX_STATUS	29
+#define KS8695_IRQ_WAN_TX_STATUS	30
+#define KS8695_IRQ_WAN_LINK		31
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
new file mode 100644
index 00000000000..dadbe66cb75
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/memory.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 Memory definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical SRAM offset.
+ */
+#define PHYS_OFFSET		KS8695_SDRAM_PA
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PCI
+
+/* PCI mappings */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
+#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
+
+/* Platform-bus mapping */
+extern struct bus_type platform_bus_type;
+#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
+#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
+					__phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
+					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
+
+#else
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
new file mode 100644
index 00000000000..0df6fe61d1c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-gpio.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ *
+ * KS8695 - GPIO control registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_GPIO_H
+#define KS8695_GPIO_H
+
+#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
+#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
+#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
+
+
+#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
+#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
+#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
+
+
+/* Port Mode Register */
+#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
+
+/* Port Control Register */
+#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
+#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
+#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
+#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
+#define IOPC_IOEINT3_MODE(x)	((x) << 12)
+#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
+#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
+#define IOPC_IOEINT2_MODE(x)	((x) << 8)
+#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
+#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
+#define IOPC_IOEINT1_MODE(x)	((x) << 4)
+#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
+#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
+#define IOPC_IOEINT0_MODE(x)	((x) << 0)
+
+ /* Trigger Modes */
+#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
+#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
+#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
+#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
+#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
+
+/* Port Data Register */
+#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
new file mode 100644
index 00000000000..815ce5c2e3b
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - HPNA Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_HPNA_H
+#define KS8695_HPNA_H
+
+#define KS8695_HPNA_OFFSET	(0xF0000 + 0xA000)
+#define KS8695_HPNA_VA		(KS8695_IO_VA + KS8695_HPNA_OFFSET)
+#define KS8695_HPNA_PA		(KS8695_IO_PA + KS8695_HPNA_OFFSET)
+
+
+/*
+ * HPNA registers
+ */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
new file mode 100644
index 00000000000..352b7e8704d
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-irq.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-irq.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - IRQ registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_IRQ_H
+#define KS8695_IRQ_H
+
+#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
+#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
+#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
+
+
+/*
+ * Interrupt Controller registers
+ */
+#define KS8695_INTMC		(0x00)		/* Mode Control Register */
+#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
+#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
+#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
+#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
+#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
+#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
+#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
+#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
+#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
+#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
+#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
+#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
+#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
new file mode 100644
index 00000000000..9ef409901e7
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-lan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - LAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_LAN_H
+#define KS8695_LAN_H
+
+#define KS8695_LAN_OFFSET	(0xF0000 + 0x8000)
+#define KS8695_LAN_VA		(KS8695_IO_VA + KS8695_LAN_OFFSET)
+#define KS8695_LAN_PA		(KS8695_IO_PA + KS8695_LAN_OFFSET)
+
+
+/*
+ * LAN registers
+ */
+#define KS8695_LMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_LMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_LMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_LMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_LTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_LMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define LMDTXC_LMTRST		(1    << 31)	/* Soft Reset */
+#define LMDTXC_LMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define LMDTXC_LMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define LMDTXC_LMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define LMDTXC_LMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define LMDTXC_LMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define LMDTXC_LMTLB		(1    <<  8)	/* Loopback mode */
+#define LMDTXC_LMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define LMDTXC_LMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define LMDTXC_LMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define LMDRXC_LMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define LMDRXC_LMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define LMDRXC_LMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define LMDRXC_LMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define LMDRXC_LMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define LMDRXC_LMRB		(1    <<  6)	/* Receive Broadcast */
+#define LMDRXC_LMRM		(1    <<  5)	/* Receive Multicast */
+#define LMDRXC_LMRU		(1    <<  4)	/* Receive Unicast */
+#define LMDRXC_LMRERR		(1    <<  3)	/* Receive Error Frame */
+#define LMDRXC_LMRA		(1    <<  2)	/* Receive All */
+#define LMDRXC_LMRE		(1    <<  1)	/* RX Enable */
+
+/* Additional Station Address High */
+#define LMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/include/mach/regs-mem.h
new file mode 100644
index 00000000000..55806bc68ce
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-mem.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Memory Controller registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MEM_H
+#define KS8695_MEM_H
+
+#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
+#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
+#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
+
+
+/*
+ * Memory Controller Registers
+ */
+#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
+#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
+#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
+#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
+#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
+#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
+#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
+#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
+#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
+#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
+#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
+
+
+/* External I/O Access Control Registers */
+#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
+#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
+#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
+#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
+
+/* ROM/SRAM/Flash Control Register */
+#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
+#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
+#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
+#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
+#define		PMC_NORMAL		(0 << 0)
+#define		PMC_4WORD		(1 << 0)
+#define		PMC_8WORD		(2 << 0)
+#define		PMC_16WORD		(3 << 0)
+
+/* External I/O and ROM/SRAM/Flash General Register */
+#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
+#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
+#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
+#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
+#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
+#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
+
+/* SDRAM Control Register */
+#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
+#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
+#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
+
+/* SDRAM General Control Register */
+#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
+#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
+
+/* SDRAM Buffer Control Register */
+#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
+#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
+#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
+#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
+#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
+#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
+#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
+#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
+
+/* SDRAM Refresh Timer Register */
+#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
new file mode 100644
index 00000000000..2740c52494a
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-misc.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-misc.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Miscellaneous Registers
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MISC_H
+#define KS8695_MISC_H
+
+#define KS8695_MISC_OFFSET	(0xF0000 + 0xEA00)
+#define KS8695_MISC_VA		(KS8695_IO_VA + KS8695_MISC_OFFSET)
+#define KS8695_MISC_PA		(KS8695_IO_PA + KS8695_MISC_OFFSET)
+
+
+/*
+ * Miscellaneous registers
+ */
+#define KS8695_DID		(0x00)		/* Device ID */
+#define KS8695_RID		(0x04)		/* Revision ID */
+#define KS8695_HMC		(0x08)		/* HPNA Miscellaneous Control [KS8695 only] */
+#define KS8695_WMC		(0x0c)		/* WAN Miscellaneous Control */
+#define KS8695_WPPM		(0x10)		/* WAN PHY Power Management */
+#define KS8695_PPS		(0x1c)		/* PHY PowerSave */
+
+/* Device ID Register */
+#define DID_ID			(0xffff << 0)	/* Device ID */
+
+/* Revision ID Register */
+#define RID_SUBID		(0xf << 4)	/* Sub-Device ID */
+#define RID_REVISION		(0xf << 0)	/* Revision ID */
+
+/* HPNA Miscellaneous Control Register */
+#define HMC_HSS			(1 << 1)	/* Speed */
+#define HMC_HDS			(1 << 0)	/* Duplex */
+
+/* WAN Miscellaneous Control Register */
+#define WMC_WANC		(1 << 30)	/* Auto-negotiation complete */
+#define WMC_WANR		(1 << 29)	/* Auto-negotiation restart */
+#define WMC_WANAP		(1 << 28)	/* Advertise Pause */
+#define WMC_WANA100F		(1 << 27)	/* Advertise 100 FDX */
+#define WMC_WANA100H		(1 << 26)	/* Advertise 100 HDX */
+#define WMC_WANA10F		(1 << 25)	/* Advertise 10 FDX */
+#define WMC_WANA10H		(1 << 24)	/* Advertise 10 HDX */
+#define WMC_WLS			(1 << 23)	/* Link status */
+#define WMC_WDS			(1 << 22)	/* Duplex status */
+#define WMC_WSS			(1 << 21)	/* Speed status */
+#define WMC_WLPP		(1 << 20)	/* Link Partner Pause */
+#define WMC_WLP100F		(1 << 19)	/* Link Partner 100 FDX */
+#define WMC_WLP100H		(1 << 18)	/* Link Partner 100 HDX */
+#define WMC_WLP10F		(1 << 17)	/* Link Partner 10 FDX */
+#define WMC_WLP10H		(1 << 16)	/* Link Partner 10 HDX */
+#define WMC_WAND		(1 << 15)	/* Auto-negotiation disable */
+#define WMC_WANF100		(1 << 14)	/* Force 100 */
+#define WMC_WANFF		(1 << 13)	/* Force FDX */
+#define WMC_WLED1S		(7 <<  4)	/* LED1 Select */
+#define		WLED1S_SPEED		(0 << 4)
+#define		WLED1S_LINK		(1 << 4)
+#define		WLED1S_DUPLEX		(2 << 4)
+#define		WLED1S_COLLISION	(3 << 4)
+#define		WLED1S_ACTIVITY		(4 << 4)
+#define		WLED1S_FDX_COLLISION	(5 << 4)
+#define		WLED1S_LINK_ACTIVITY	(6 << 4)
+#define WMC_WLED0S		(7 << 0)	/* LED0 Select */
+#define		WLED0S_SPEED		(0 << 0)
+#define		WLED0S_LINK		(1 << 0)
+#define		WLED0S_DUPLEX		(2 << 0)
+#define		WLED0S_COLLISION	(3 << 0)
+#define		WLED0S_ACTIVITY		(4 << 0)
+#define		WLED0S_FDX_COLLISION	(5 << 0)
+#define		WLED0S_LINK_ACTIVITY	(6 << 0)
+
+/* WAN PHY Power Management Register */
+#define WPPM_WLPBK		(1 << 14)	/* Local Loopback */
+#define WPPM_WRLPKB		(1 << 13)	/* Remove Loopback */
+#define WPPM_WPI		(1 << 12)	/* PHY isolate */
+#define WPPM_WFL		(1 << 10)	/* Force link */
+#define WPPM_MDIXS		(1 << 9)	/* MDIX Status */
+#define WPPM_FEF		(1 << 8)	/* Far End Fault */
+#define WPPM_AMDIXP		(1 << 7)	/* Auto MDIX Parameter */
+#define WPPM_TXDIS		(1 << 6)	/* Disable transmitter */
+#define WPPM_DFEF		(1 << 5)	/* Disable Far End Fault */
+#define WPPM_PD			(1 << 4)	/* Power Down */
+#define WPPM_DMDX		(1 << 3)	/* Disable Auto MDI/MDIX */
+#define WPPM_FMDX		(1 << 2)	/* Force MDIX */
+#define WPPM_LPBK		(1 << 1)	/* MAX Loopback */
+
+/* PHY Power Save Register */
+#define PPS_PPSM		(1 << 0)	/* PHY Power Save Mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/include/mach/regs-pci.h
new file mode 100644
index 00000000000..75a9db6edbd
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-pci.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-pci.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - PCI bridge registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KS8695_PCI_OFFSET	(0xF0000 + 0x2000)
+#define KS8695_PCI_VA		(KS8695_IO_VA + KS8695_PCI_OFFSET)
+#define KS8695_PCI_PA		(KS8695_IO_PA + KS8695_PCI_OFFSET)
+
+
+#define KS8695_CRCFID		(0x000)		/* Configuration: Identification */
+#define KS8695_CRCFCS		(0x004)		/* Configuration: Command and Status */
+#define KS8695_CRCFRV		(0x008)		/* Configuration: Revision */
+#define KS8695_CRCFLT		(0x00C)		/* Configuration: Latency Timer */
+#define KS8695_CRCBMA		(0x010)		/* Configuration: Base Memory Address */
+#define KS8695_CRCSID		(0x02C)		/* Configuration: Subsystem ID */
+#define KS8695_CRCFIT		(0x03C)		/* Configuration: Interrupt */
+#define KS8695_PBCA		(0x100)		/* Bridge Configuration Address */
+#define KS8695_PBCD		(0x104)		/* Bridge Configuration Data */
+#define KS8695_PBM		(0x200)		/* Bridge Mode */
+#define KS8695_PBCS		(0x204)		/* Bridge Control and Status */
+#define KS8695_PMBA		(0x208)		/* Bridge Memory Base Address */
+#define KS8695_PMBAC		(0x20C)		/* Bridge Memory Base Address Control */
+#define KS8695_PMBAM		(0x210)		/* Bridge Memory Base Address Mask */
+#define KS8695_PMBAT		(0x214)		/* Bridge Memory Base Address Translation */
+#define KS8695_PIOBA		(0x218)		/* Bridge I/O Base Address */
+#define KS8695_PIOBAC		(0x21C)		/* Bridge I/O Base Address Control */
+#define KS8695_PIOBAM		(0x220)		/* Bridge I/O Base Address Mask */
+#define KS8695_PIOBAT		(0x224)		/* Bridge I/O Base Address Translation */
+
+
+/* Configuration: Identification */
+
+/* Configuration: Command and Status */
+
+/* Configuration: Revision */
+
+
+
+#define CFRV_GUEST		(1 << 23)
+
+#define PBCA_TYPE1		(1)
+#define PBCA_ENABLE		(1 << 31)
+
+
diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
new file mode 100644
index 00000000000..56d12e8de89
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-switch.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Switch Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SWITCH_H
+#define KS8695_SWITCH_H
+
+#define KS8695_SWITCH_OFFSET	(0xF0000 + 0xe800)
+#define KS8695_SWITCH_VA	(KS8695_IO_VA + KS8695_SWITCH_OFFSET)
+#define KS8695_SWITCH_PA	(KS8695_IO_PA + KS8695_SWITCH_OFFSET)
+
+
+/*
+ * Switch registers
+ */
+#define KS8695_SEC0		(0x00)		/* Switch Engine Control 0 */
+#define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
+#define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
+
+#define KS8695_P(x)_C(z)	(0xc0 + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
+
+#define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
+#define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */
+#define KS8695_SEIAC		(0x50)		/* Indirect Access Control */
+#define KS8695_SEIADH2		(0x54)		/* Indirect Access Data High 2 */
+#define KS8695_SEIADH1		(0x58)		/* Indirect Access Data High 1 */
+#define KS8695_SEIADL		(0x5c)		/* Indirect Access Data Low */
+#define KS8695_SEAFC		(0x60)		/* Advance Feature Control */
+#define KS8695_SEDSCPH		(0x64)		/* TOS Priority High */
+#define KS8695_SEDSCPL		(0x68)		/* TOS Priority Low */
+#define KS8695_SEMAH		(0x6c)		/* Switch Engine MAC Address High */
+#define KS8695_SEMAL		(0x70)		/* Switch Engine MAC Address Low */
+#define KS8695_LPPM12		(0x74)		/* Port 1 & 2 PHY Power Management */
+#define KS8695_LPPM34		(0x78)		/* Port 3 & 4 PHY Power Management */
+
+
+/* Switch Engine Control 0 */
+#define SEC0_LLED1S		(7 << 25)	/* LED1 Select */
+#define		LLED1S_SPEED		(0 << 25)
+#define		LLED1S_LINK		(1 << 25)
+#define		LLED1S_DUPLEX		(2 << 25)
+#define		LLED1S_COLLISION	(3 << 25)
+#define		LLED1S_ACTIVITY		(4 << 25)
+#define		LLED1S_FDX_COLLISION	(5 << 25)
+#define		LLED1S_LINK_ACTIVITY	(6 << 25)
+#define SEC0_LLED0S		(7 << 22)	/* LED0 Select */
+#define		LLED0S_SPEED		(0 << 22)
+#define		LLED0S_LINK		(1 << 22)
+#define		LLED0S_DUPLEX		(2 << 22)
+#define		LLED0S_COLLISION	(3 << 22)
+#define		LLED0S_ACTIVITY		(4 << 22)
+#define		LLED0S_FDX_COLLISION	(5 << 22)
+#define		LLED0S_LINK_ACTIVITY	(6 << 22)
+#define SEC0_ENABLE		(1 << 0)	/* Enable Switch */
+
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/include/mach/regs-sys.h
new file mode 100644
index 00000000000..57c20be0c12
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-sys.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-sys.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - System control registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SYS_H
+#define KS8695_SYS_H
+
+#define KS8695_SYS_OFFSET	(0xF0000 + 0x0000)
+#define KS8695_SYS_VA		(KS8695_IO_VA + KS8695_SYS_OFFSET)
+#define KS8695_SYS_PA		(KS8695_IO_PA + KS8695_SYS_OFFSET)
+
+
+#define KS8695_SYSCFG		(0x00)		/* System Configuration Register */
+#define KS8695_CLKCON		(0x04)		/* System Clock and Bus Control Register */
+
+
+/* System Configuration Register */
+#define SYSCFG_SPRBP		(0x3ff << 16)	/* Register Bank Base Pointer */
+
+/* System Clock and Bus Control Register */
+#define CLKCON_SFMODE		(1 << 8)	/* System Fast Mode for Simulation */
+#define CLKCON_SCDC		(7 << 0)	/* System Clock Divider Select */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
new file mode 100644
index 00000000000..e620cda99d2
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-timer.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-timer.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Timer registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_TIMER_H
+#define KS8695_TIMER_H
+
+#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
+#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
+
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON		(0x00)		/* Timer Control Register */
+#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
+#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
+#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
+#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
+
+
+/* Timer Control Register */
+#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
+#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
new file mode 100644
index 00000000000..8581fbc6245
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-uart.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - UART register and bit definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef KS8695_UART_H
+#define KS8695_UART_H
+
+#define KS8695_UART_OFFSET	(0xF0000 + 0xE000)
+#define KS8695_UART_VA		(KS8695_IO_VA + KS8695_UART_OFFSET)
+#define KS8695_UART_PA		(KS8695_IO_PA + KS8695_UART_OFFSET)
+
+
+/*
+ * UART registers
+ */
+#define KS8695_URRB	(0x00)		/* Receive Buffer Register */
+#define KS8695_URTH	(0x04)		/* Transmit Holding Register */
+#define KS8695_URFC	(0x08)		/* FIFO Control Register */
+#define KS8695_URLC	(0x0C)		/* Line Control Register */
+#define KS8695_URMC	(0x10)		/* Modem Control Register */
+#define KS8695_URLS	(0x14)		/* Line Status Register */
+#define KS8695_URMS	(0x18)		/* Modem Status Register */
+#define KS8695_URBD	(0x1C)		/* Baud Rate Divisor Register */
+#define KS8695_USR	(0x20)		/* Status Register */
+
+
+/* FIFO Control Register */
+#define URFC_URFRT	(3 << 6)	/* Receive FIFO Trigger Level */
+#define		URFC_URFRT_1	(0 << 6)
+#define		URFC_URFRT_4	(1 << 6)
+#define		URFC_URFRT_8	(2 << 6)
+#define		URFC_URFRT_14	(3 << 6)
+#define URFC_URTFR	(1 << 2)	/* Transmit FIFO Reset */
+#define URFC_URRFR	(1 << 1)	/* Receive FIFO Reset */
+#define URFC_URFE	(1 << 0)	/* FIFO Enable */
+
+/* Line Control Register */
+#define URLC_URSBC	(1 << 6)	/* Set Break Condition */
+#define URLC_PARITY	(7 << 3)	/* Parity */
+#define		URPE_NONE	(0 << 3)
+#define		URPE_ODD	(1 << 3)
+#define		URPE_EVEN	(3 << 3)
+#define		URPE_MARK	(5 << 3)
+#define		URPE_SPACE	(7 << 3)
+#define URLC_URSB	(1 << 2)	/* Stop Bits */
+#define URLC_URCL	(3 << 0)	/* Character Length */
+#define		URCL_5		(0 << 0)
+#define		URCL_6		(1 << 0)
+#define		URCL_7		(2 << 0)
+#define		URCL_8		(3 << 0)
+
+/* Modem Control Register */
+#define URMC_URLB	(1 << 4)	/* Loop-back mode */
+#define URMC_UROUT2	(1 << 3)	/* OUT2 signal */
+#define URMC_UROUT1	(1 << 2)	/* OUT1 signal */
+#define URMC_URRTS	(1 << 1)	/* Request to Send */
+#define URMC_URDTR	(1 << 0)	/* Data Terminal Ready */
+
+/* Line Status Register */
+#define URLS_URRFE	(1 << 7)	/* Receive FIFO Error */
+#define URLS_URTE	(1 << 6)	/* Transmit Empty */
+#define URLS_URTHRE	(1 << 5)	/* Transmit Holding Register Empty */
+#define URLS_URBI	(1 << 4)	/* Break Interrupt */
+#define URLS_URFE	(1 << 3)	/* Framing Error */
+#define URLS_URPE	(1 << 2)	/* Parity Error */
+#define URLS_URROE	(1 << 1)	/* Receive Overrun Error */
+#define URLS_URDR	(1 << 0)	/* Receive Data Ready */
+
+/* Modem Status Register */
+#define URMS_URDCD	(1 << 7)	/* Data Carrier Detect */
+#define URMS_URRI	(1 << 6)	/* Ring Indicator */
+#define URMS_URDSR	(1 << 5)	/* Data Set Ready */
+#define URMS_URCTS	(1 << 4)	/* Clear to Send */
+#define URMS_URDDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define URMS_URTERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define URMS_URDDST	(1 << 1)	/* Delta Data Set Ready */
+#define URMS_URDCTS	(1 << 0)	/* Delta Clear to Send */
+
+/* Status Register */
+#define USR_UTI		(1 << 0)	/* Timeout Indication */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
new file mode 100644
index 00000000000..eb494ec6e95
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - WAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_WAN_H
+#define KS8695_WAN_H
+
+#define KS8695_WAN_OFFSET	(0xF0000 + 0x6000)
+#define KS8695_WAN_VA		(KS8695_IO_VA + KS8695_WAN_OFFSET)
+#define KS8695_WAN_PA		(KS8695_IO_PA + KS8695_WAN_OFFSET)
+
+
+/*
+ * WAN registers
+ */
+#define KS8695_WMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_WMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_WMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_WMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_WTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_WMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define WMDTXC_WMTRST		(1    << 31)	/* Soft Reset */
+#define WMDTXC_WMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define WMDTXC_WMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define WMDTXC_WMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define WMDTXC_WMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define WMDTXC_WMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define WMDTXC_WMTLB		(1    <<  8)	/* Loopback mode */
+#define WMDTXC_WMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define WMDTXC_WMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define WMDTXC_WMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define WMDRXC_WMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define WMDRXC_WMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define WMDRXC_WMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define WMDRXC_WMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define WMDRXC_WMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define WMDRXC_WMRB		(1    <<  6)	/* Receive Broadcast */
+#define WMDRXC_WMRM		(1    <<  5)	/* Receive Multicast */
+#define WMDRXC_WMRU		(1    <<  4)	/* Receive Unicast */
+#define WMDRXC_WMRERR		(1    <<  3)	/* Receive Error Frame */
+#define WMDRXC_WMRA		(1    <<  2)	/* Receive All */
+#define WMDRXC_WMRE		(1    <<  0)	/* RX Enable */
+
+/* Additional Station Address High */
+#define WMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
new file mode 100644
index 00000000000..2a6f9186905
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/regs-timer.h>
+
+static void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks,
+	 */
+	cpu_do_idle();
+
+}
+
+static void arch_reset(char mode)
+{
+	unsigned int reg;
+
+	if (mode == 's')
+		cpu_reset(0);
+
+	/* disable timer0 */
+	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* enable watchdog mode */
+	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+	/* re-enable timer0 */
+	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
new file mode 100644
index 00000000000..4682e350369
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/timex.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - Time Parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* timers are derived from MCLK, which is 25MHz */
+#define CLOCK_TICK_RATE 25000000
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
new file mode 100644
index 00000000000..0eee37a6907
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Kernel uncompressor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <mach/regs-uart.h>
+
+static void putc(char c)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+		barrier();
+
+	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+}
+
+static inline void flush(void)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
new file mode 100644
index 00000000000..744ac66be3a
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 Ben Dooks
+ * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * KS8695 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 4c3ab43e104..e5e71f4dbb8 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 static void ks8695_irq_mask(unsigned int irqno)
 {
@@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
 	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
 
 	switch (type) {
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			mode = IOPC_TM_HIGH;
 			level_triggered = 1;
 			break;
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			mode = IOPC_TM_LOW;
 			level_triggered = 1;
 			break;
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			mode = IOPC_TM_RISING;
 			break;
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			mode = IOPC_TM_FALLING;
 			break;
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			mode = IOPC_TM_EDGE;
 			break;
 		default:
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index d61762ae50d..184ef74e4be 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -12,10 +12,9 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/mach-types.h>
 #include <asm/leds.h>
-#include <asm/arch/devices.h>
-#include <asm/arch/gpio.h>
+#include <mach/devices.h>
+#include <mach/gpio.h>
 
 
 static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 3f4e0330cb1..1746c67af17 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -31,10 +31,10 @@
 #include <asm/io.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/devices.h>
-#include <asm/arch/regs-pci.h>
+#include <mach/devices.h>
+#include <mach/regs-pci.h>
 
 
 static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 02f766b3121..940888dffc1 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -28,8 +28,8 @@
 #include <asm/io.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-timer.h>
+#include <mach/regs-irq.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index 561a0fe7095..50d23246d4f 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -13,7 +13,7 @@
 #include <asm/types.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
new file mode 100644
index 00000000000..4671558cdd5
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/aux_reg.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-l7200/include/mach/aux_reg.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   08-02-2000	SJH	Created file
+ */
+#ifndef _ASM_ARCH_AUXREG_H
+#define _ASM_ARCH_AUXREG_H
+
+#include <mach/hardware.h>
+
+#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
+
+/*
+ * Auxillary register values
+ */
+#define AUX_CLEAR		0x00000000
+#define AUX_DIAG_LED_ON		0x00000002
+#define AUX_RTS_UART1		0x00000004
+#define AUX_DTR_UART1		0x00000008
+#define AUX_KBD_COLUMN_12_HIGH	0x00000010
+#define AUX_KBD_COLUMN_12_OFF	0x00000020
+#define AUX_KBD_COLUMN_13_HIGH	0x00000040
+#define AUX_KBD_COLUMN_13_OFF	0x00000080
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 00000000000..34eed2a63e6
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ	io_virt, IO_BASE
+		.equ	io_phys, IO_START
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #io_phys		@ physical base address
+		movne	\rx, #io_virt		@ virtual address
+		add	\rx, \rx, #0x00044000	@ UART1
+@		add	\rx, \rx, #0x00045000	@ UART2
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-l7200/include/mach/dma.h b/arch/arm/mach-l7200/include/mach/dma.h
new file mode 100644
index 00000000000..c7e48bd4590
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/dma.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-l7200/include/mach/dma.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  08-29-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS         0xd0000000
+
+#define DMA_S0                  0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
new file mode 100644
index 00000000000..1726d91fc1d
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-l7200/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for L7200-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.equ	irq_base_addr,	IO_BASE_2
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
+		add	\irqstat, \irqstat, #0x00001000		@ Status reg
+		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
+		mov     \irqnr, #0
+1001:		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tsteq   \irqnr, #32
+		beq     1001b
+		teq     \irqnr, #32
+		.endm
+
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
new file mode 100644
index 00000000000..2b7086a26b8
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gp_timers.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-l7200/include/mach/gp_timers.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   07-28-2000	SJH	Created file
+ *   08-02-2000	SJH	Used structure for registers
+ */
+#ifndef _ASM_ARCH_GPTIMERS_H
+#define _ASM_ARCH_GPTIMERS_H
+
+#include <mach/hardware.h>
+
+/*
+ * Layout of L7200 general purpose timer registers
+ */
+struct GPT_Regs {
+	unsigned int TIMERLOAD;
+	unsigned int TIMERVALUE;
+	unsigned int TIMERCONTROL;
+	unsigned int TIMERCLEAR;
+};
+
+#define GPT_BASE		(IO_BASE_2 + 0x3000)
+#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
+#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
+
+/*
+ * General register values
+ */
+#define	GPT_PRESCALE_1		0x00000000
+#define	GPT_PRESCALE_16		0x00000004
+#define	GPT_PRESCALE_256	0x00000008
+#define GPT_MODE_FREERUN	0x00000000
+#define GPT_MODE_PERIODIC	0x00000040
+#define GPT_ENABLE		0x00000080
+#define GPT_BZTOG		0x00000100
+#define GPT_BZMOD		0x00000200
+#define GPT_LOAD_MASK 		0x0000ffff
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
new file mode 100644
index 00000000000..c7b0a5d7b8b
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gpio.h
@@ -0,0 +1,105 @@
+/****************************************************************************/
+/*
+ *      arch/arm/mach-l7200/include/mach/gpio.h
+ *
+ *      Registers and  helper functions for the L7200 Link-Up Systems
+ *      GPIO.
+ *
+ *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
+#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
+
+/* Offsets from the start of the GPIO for all the registers. */
+#define PADR_OFF     0x000
+#define PADDR_OFF    0x004
+#define PASBSR_OFF   0x008
+#define PAEENR_OFF   0x00c
+#define PAESNR_OFF   0x010
+#define PAESTR_OFF   0x014
+#define PAIMR_OFF    0x018
+#define PAINT_OFF    0x01c
+
+#define PBDR_OFF     0x020
+#define PBDDR_OFF    0x024
+#define PBSBSR_OFF   0x028
+#define PBIMR_OFF    0x038
+#define PBINT_OFF    0x03c
+
+#define PCDR_OFF     0x040
+#define PCDDR_OFF    0x044
+#define PCSBSR_OFF   0x048
+#define PCIMR_OFF    0x058
+#define PCINT_OFF    0x05c
+
+#define PDDR_OFF     0x060
+#define PDDDR_OFF    0x064
+#define PDSBSR_OFF   0x068
+#define PDEENR_OFF   0x06c
+#define PDESNR_OFF   0x070
+#define PDESTR_OFF   0x074
+#define PDIMR_OFF    0x078
+#define PDINT_OFF    0x07c
+
+#define PEDR_OFF     0x080
+#define PEDDR_OFF    0x084
+#define PESBSR_OFF   0x088
+#define PEEENR_OFF   0x08c
+#define PEESNR_OFF   0x090
+#define PEESTR_OFF   0x094
+#define PEIMR_OFF    0x098
+#define PEINT_OFF    0x09c
+
+/* Define the GPIO registers for use by device drivers and the kernel. */
+#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
+#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
+#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
+#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
+#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
+#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
+#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
+#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
+
+#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
+#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
+#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
+#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
+#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
+
+#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
+#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
+#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
+#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
+#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
+
+#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
+#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
+#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
+#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
+#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
+#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
+#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
+#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
+
+#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
+#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
+#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
+#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
+#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
+#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
+#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
+#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
+
+#define VEE_EN         0x02
+#define BACKLIGHT_EN   0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
new file mode 100644
index 00000000000..c31909cfc25
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-l7200/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the 
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ *   02-01-2000	 RS	Created L7200 version, derived from rpc code
+ *   03-21-2000	SJH	Cleaned up file
+ *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
+ *   04-25-2000	SJH	Removed unused symbols and such
+ *   05-05-2000	SJH	Complete rewrite
+ *   07-31-2000	SJH	Added undocumented debug auxillary port to
+ *			get at last two columns for keyboard driver
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START		0xf0000000
+#define RAM_SIZE		0x02000000
+#define RAM_BASE		0xc0000000
+
+#define IO_START		0x80000000      /* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			0xd0000000
+
+#define IO_START_2		0x90000000      /* I/O */
+#define IO_SIZE_2		0x01000000
+#define IO_BASE_2		0xd1000000
+
+#define AUX_START		0x1a000000      /* AUX PORT */
+#define AUX_SIZE 		0x01000000
+#define AUX_BASE		0xd2000000
+
+#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
+#define FLASH1_SIZE 		0x01000000
+#define FLASH1_BASE		0xd3000000
+
+#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
+#define FLASH2_SIZE 		0x01000000
+#define FLASH2_BASE		0xd4000000
+
+#define ISA_START		0x20000000	/* ISA */
+#define ISA_SIZE		0x20000000
+#define ISA_BASE		0xe0000000
+
+#define PCIO_BASE		IO_BASE
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
new file mode 100644
index 00000000000..d432ba9e5df
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-l7200/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
+ *  08-31-2000	SJH	Added in IO functions necessary for new drivers
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * There are not real ISA nor PCI buses, so we fake it.
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
new file mode 100644
index 00000000000..7edffd713c5
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-l7200/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000 RS	Create l7200 version
+ *   03-28-2000 SJH	Removed unused interrupt
+ *   07-28-2000 SJH	Added pseudo-keyboard interrupt
+ */
+
+/*
+ * NOTE: The second timer (Timer 2) is used as the keyboard
+ *       interrupt when the keyboard driver is enabled.
+ */
+
+#define NR_IRQS          32
+
+#define IRQ_STWDOG        0   /* Watchdog timer */
+#define IRQ_PROG          1   /* Programmable interrupt */
+#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
+#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
+#define IRQ_GCTC1         4   /* Timer 1 */
+#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
+#define IRQ_DMA           6   /* DMA controller */
+#define IRQ_CLCD          7   /* Color LCD controller */
+#define IRQ_SM_RX         8   /* Smart card */
+#define IRQ_SM_TX         9   /* Smart cart */
+#define IRQ_SM_RST       10   /* Smart card */
+#define IRQ_SIB          11   /* Serial Interface Bus */
+#define IRQ_MMC          12   /* MultiMediaCard */
+#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
+#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
+#define IRQ_SPI          15   /* SPI slave */
+#define IRQ_UART_1       16   /* UART 1 */
+#define IRQ_UART_2       17   /* UART 2 */
+#define IRQ_IRDA         18   /* IRDA */
+#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
+#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
+#define IRQ_GPIO         21   /* General Purpose IO */
+#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
+#define IRQ_M2M          23   /* Memory to memory DMA  */
+#define IRQ_RESERVED     24   /* RESERVED, don't use */
+#define IRQ_INTF         25   /* External active low interrupt */
+#define IRQ_INT0         26   /* External active low interrupt */
+#define IRQ_INT1         27   /* External active low interrupt */
+#define IRQ_INT2         28   /* External active low interrupt */
+#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
+#define IRQ_BAT_LO       30   /* Low batery or external power */
+#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START	64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
new file mode 100644
index 00000000000..f338cf3ffd9
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *
+ * Changelog:
+ *  03-13-2000	SJH	Created
+ *  04-13-2000  RS      Changed bus macros for new addr
+ *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset on the L7200 SDB.
+ */
+#define PHYS_OFFSET     UL(0xf0000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
new file mode 100644
index 00000000000..3959871e836
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmpcon.h
@@ -0,0 +1,46 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/pmpcon.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   DC/DC converter register.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
+
+/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
+
+#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
+#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
+
+
+#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
+
+#define PWM2_50CYCLE 0x800
+#define CONTRAST     0x9
+
+#define PWM1H (CONTRAST)
+#define PWM1L (CONTRAST << 4)
+
+#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
+	
+/* PMPCON = 0x811;   // too light and fuzzy
+ * PMPCON = 0x844;   
+ * PMPCON = 0x866;   // better color poor depth
+ * PMPCON = 0x888;   // Darker but better depth 
+ * PMPCON = 0x899;   // Darker even better depth
+ * PMPCON = 0x8aa;   // too dark even better depth
+ * PMPCON = 0X8cc;   // Way too dark
+ */
+
+/* As CONTRAST value increases the greater the depth perception and
+ * the darker the colors.
+ */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
new file mode 100644
index 00000000000..a2da7aedf20
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmu.h
@@ -0,0 +1,125 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/pmu.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   Power Management Unit (PMU).
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
+#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
+
+
+/* Define the PMU registers for use by device drivers and the kernel. */
+
+typedef struct {
+     unsigned int CURRENT;  /* Current configuration register */
+     unsigned int NEXT;     /* Next configuration register */
+     unsigned int reserved;
+     unsigned int RUN;      /* Run configuration register */
+     unsigned int COMM;     /* Configuration command register */
+     unsigned int SDRAM;    /* SDRAM configuration bypass register */
+} pmu_interface;
+
+#define PMU ((volatile pmu_interface *)(PMU_BASE))
+
+
+/* Macro's for reading the common register fields. */
+
+#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
+#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
+#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
+#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
+#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
+#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
+#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
+#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
+#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
+#define GET_FASTBUS(reg)  (reg & 0x1)
+
+/* CFG_NEXT register */
+
+#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
+#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
+#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
+#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
+
+/* Useful field values that can be used to construct the
+ * CFG_NEXT and CFG_RUN registers.
+ */
+
+#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
+#define NOCHANGE_STALL   1<<25
+#define CHANGE_NOSTALL   2<<25
+#define CHANGE_STALL     3<<25
+
+#define INTRET           1<<17
+#define OSCEN            1<<16
+#define OSCMUX           1<<15
+
+/* PLL frequencies */
+
+#define PLLMUL_0         0<<9         /*  3.6864 MHz */
+#define PLLMUL_1         1<<9         /*  ?????? MHz */
+#define PLLMUL_5         5<<9         /*  18.432 MHz */
+#define PLLMUL_10       10<<9         /*  36.864 MHz */
+#define PLLMUL_18       18<<9         /*  ?????? MHz */
+#define PLLMUL_20       20<<9         /*  73.728 MHz */
+#define PLLMUL_32       32<<9         /*  ?????? MHz */
+#define PLLMUL_35       35<<9         /* 129.024 MHz */
+#define PLLMUL_36       36<<9         /*  ?????? MHz */
+#define PLLMUL_39       39<<9         /*  ?????? MHz */
+#define PLLMUL_40       40<<9         /* 147.456 MHz */
+
+/* Clock recovery times */
+
+#define CRCLOCK_1        1<<18
+#define CRCLOCK_2        2<<18
+#define CRCLOCK_4        4<<18
+#define CRCLOCK_8        8<<18
+#define CRCLOCK_16      16<<18
+#define CRCLOCK_32      32<<18
+#define CRCLOCK_63      63<<18
+#define CRCLOCK_127    127<<18
+
+#define PLLEN            1<<8
+#define PLLMUX           1<<7
+#define SDR_STOP         1<<6
+#define SYSCLKEN         1<<5
+
+#define BCLK_DIV_4       2<<3
+#define BCLK_DIV_2       1<<3
+#define BCLK_DIV_1       0<<3
+
+#define SDRB_SEL         1<<2
+#define SDRF_SEL         1<<1
+#define FASTBUS          1<<0
+
+
+/* CFG_SDRAM */
+
+#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
+#define SDRREFACK        1<<1  /* Read-only */
+#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
+#define SDRSTOPACK       1<<3  /* Read-only */
+#define PICEN            1<<4  /* Enable Co-procesor */
+#define PICTEST          1<<5
+
+#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
+#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
+#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
+#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
+#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
+#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
new file mode 100644
index 00000000000..adc05e5f837
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial.h
+ *
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-20-2000  SJH     Created
+ *  03-26-2000  SJH     Added flags for serial ports
+ *  03-27-2000  SJH     Corrected BASE_BAUD value
+ *  04-14-2000  RS      Made register addr dependent on IO_BASE
+ *  05-03-2000  SJH     Complete rewrite
+ *  05-09-2000	SJH	Stripped out architecture specific serial stuff
+ *                      and placed it in a separate file
+ *  07-28-2000	SJH	Moved base baud rate variable
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD	3686400
+
+/*
+ * Standard COM flags
+ */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS		\
+	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
+	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
+	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
+
+#define EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
new file mode 100644
index 00000000000..645f1c5e568
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial_l7200.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial_l7200.h
+ *
+ * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-09-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_SERIAL_L7200_H
+#define __ASM_ARCH_SERIAL_L7200_H
+
+#include <mach/memory.h>
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * UART base register addresses
+ */
+#define UART1_BASE	(IO_BASE + 0x00044000)
+#define UART2_BASE	(IO_BASE + 0x00045000)
+
+/*
+ * UART register offsets
+ */
+#define UARTDR			0x00	/* Tx/Rx data */
+#define RXSTAT			0x04	/* Rx status */
+#define H_UBRLCR		0x08	/* mode register high */
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
+#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
+#define UARTCON			0x14	/* control register */
+#define UARTFLG			0x18	/* flag register */
+#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
+#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
+
+/*
+ * UART baud rate register values
+ */
+#define BR_110			0x827
+#define BR_1200			0x06e
+#define BR_2400			0x05f
+#define BR_4800			0x02f
+#define BR_9600			0x017
+#define BR_14400		0x00f
+#define BR_19200		0x00b
+#define BR_38400		0x005
+#define BR_57600		0x003
+#define BR_76800 		0x002
+#define BR_115200		0x001
+
+/*
+ * Receiver status register (RXSTAT) mask values
+ */
+#define RXSTAT_NO_ERR		0x00	/* No error */
+#define RXSTAT_FRM_ERR		0x01	/* Framing error */
+#define RXSTAT_PAR_ERR		0x02	/* Parity error */
+#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
+
+/*
+ * High byte of UART bit rate and line control register (H_UBRLCR) values
+ */
+#define UBRLCR_BRK		0x01	/* generate break on tx */
+#define UBRLCR_PEN		0x02	/* enable parity */
+#define UBRLCR_PDIS		0x00	/* disable parity */
+#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
+#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
+#define UBRLCR_FIFO		0x10	/* enable FIFO */
+#define UBRLCR_LEN5		0x60	/* word length5 */
+#define UBRLCR_LEN6		0x40	/* word length6 */
+#define UBRLCR_LEN7		0x20	/* word length7 */
+#define UBRLCR_LEN8		0x00	/* word length8 */
+
+/*
+ * UART control register (UARTCON) values
+ */
+#define UARTCON_UARTEN		0x01	/* Enable UART */
+#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
+
+/*
+ * UART flag register (UARTFLG) mask values
+ */
+#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
+#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
+#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
+#define UARTFLG_DCD		0x04	/* Data carrier detect */
+#define UARTFLG_DSR		0x02	/* Data set ready */
+#define UARTFLG_CTS		0x01	/* Clear to send */
+
+/*
+ * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
+ */
+#define UART_TXINT		0x01	/* TX interrupt */
+#define UART_RXINT		0x02	/* RX interrupt */
+#define UART_RXERRINT		0x04	/* RX error interrupt */
+#define UART_MSINT		0x08	/* Modem Status interrupt */
+#define UART_UDINT		0x10	/* UART Disabled interrupt */
+#define UART_ALLIRQS		0x1f	/* All interrupts */
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
new file mode 100644
index 00000000000..965728712cf
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sib.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/sib.h
+ *
+ *  Registers and helper functions for the Serial Interface Bus.
+ *
+ *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
+#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
+
+/* Offsets from the start of the SIB for all the registers. */
+
+/* Define the SIB registers for use by device drivers and the kernel. */
+
+typedef struct
+{
+     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
+     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
+     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
+     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
+     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
+     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
+     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
+} SIB_Interface;
+
+#define SIB ((volatile SIB_Interface *) (SIB_BASE))
+
+/* MCCR */
+
+#define INTERNAL_FREQ   9216000  /* Hertz */
+#define AUDIO_FREQ         5000  /* Hertz */
+#define TELECOM_FREQ       5000  /* Hertz */
+
+#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
+#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
+
+#define MCCR_ASD57      AUDIO_DIVIDE
+#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
+#define MCCR_MCE        (1 << 16)             /* SIB enable */
+#define MCCR_ECS        (1 << 17)             /* External Clock Select */
+#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
+#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
+
+
+#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
+#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
+#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
+#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
+#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
+#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
+#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
+#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
+#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
+#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
+#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
+#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
+#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
+#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
+
+/* MCDR0 */
+
+#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
+#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
+
+/* MCDR1 */
+
+#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
+#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
+
+
+/* MCSR */
+
+#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
+#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
+#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
+#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
+
+#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
+
+
+#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
+#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
+#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
+#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
+#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
+#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
+#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
+#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
+#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
+#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
+#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
+#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
+#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
+#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
+#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
+#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
+
+/* MCDR2 */
+
+#define MCDR2_rW               (1 << 16)
+
+#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
+#define MCDR2_WRITE_COMPLETE   GET_CWC
+
+#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
+#define MCDR2_READ_COMPLETE      GET_CRC
+#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
new file mode 100644
index 00000000000..2d7722be60e
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -0,0 +1,67 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/sys-clock.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   System clocks.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
+
+/* Define the interface to the SYS_CLOCK */
+
+typedef struct
+{
+     unsigned int ENABLE;
+     unsigned int ESYNC;
+     unsigned int SELECT;
+} sys_clock_interface;
+
+#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
+
+//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
+//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
+//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
+
+/* SYS_CLOCK -> ENABLE */
+
+#define SYN_EN          1<<0
+#define B18M_EN         1<<1
+#define CLK3M6_EN       1<<2
+#define BUART_EN        1<<3
+#define CLK18MU_EN      1<<4
+#define FIR_EN          1<<5
+#define MIRN_EN         1<<6
+#define UARTM_EN        1<<7
+#define SIBADC_EN       1<<8
+#define ALTD_EN         1<<9
+#define CLCLK_EN        1<<10
+
+/* SYS_CLOCK -> SELECT */
+
+#define CLK18M_DIV      1<<0
+#define MIR_SEL         1<<1
+#define SSP_SEL         1<<4
+#define MM_DIV          1<<5
+#define MM_SEL          1<<6
+#define ADC_SEL_2       0<<7
+#define ADC_SEL_4       1<<7
+#define ADC_SEL_8       3<<7
+#define ADC_SEL_16      7<<7
+#define ADC_SEL_32      0x0f<<7
+#define ADC_SEL_64      0x1f<<7
+#define ADC_SEL_128     0x3f<<7
+#define ALTD_SEL        1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
new file mode 100644
index 00000000000..5272abee0d0
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/system.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog
+ *  03-21-2000  SJH	Created
+ *  04-26-2000  SJH	Fixed functions
+ *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
+ *  05-31-2000  SJH	Properly implemented 'arch_idle'
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
new file mode 100644
index 00000000000..061771c2c2b
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/time.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-l7200/include/mach/time.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000	RS	Created l7200 version, derived from rpc code
+ *   05-03-2000	SJH	Complete rewrite
+ */
+#ifndef _ASM_ARCH_TIME_H
+#define _ASM_ARCH_TIME_H
+
+#include <mach/irqs.h>
+
+/*
+ * RTC base register address
+ */
+#define RTC_BASE	(IO_BASE_2 + 0x2000)
+
+/*
+ * RTC registers
+ */
+#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
+#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
+#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
+#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
+
+/*
+ * RTCCR register values
+ */
+#define RTC_RATE_32	0x00      /* 32 Hz tick */
+#define RTC_RATE_64	0x10      /* 64 Hz tick */
+#define RTC_RATE_128	0x20      /* 128 Hz tick */
+#define RTC_RATE_256	0x30      /* 256 Hz tick */
+#define RTC_EN_ALARM	0x01      /* Enable alarm */
+#define RTC_EN_TIC	0x04      /* Enable counter */
+#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
+
+/*
+ * Handler for RTC timer interrupt
+ */
+static irqreturn_t
+timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up RTC timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	timer_irq.handler = timer_interrupt;
+
+	setup_irq(IRQ_RTC_TICK, &timer_irq);
+
+	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
new file mode 100644
index 00000000000..ffc96a63b5a
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-l7200/include/mach/timex.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * 04-21-2000  RS Created file
+ * 05-03-2000 SJH Tick rate was wrong
+ *
+ */
+
+/*
+ * On the ARM720T, clock ticks are set to 128 Hz.
+ *
+ * NOTE: The actual RTC value is set in 'time.h' which
+ *       must be changed when choosing a different tick
+ *       rate. The value of HZ in 'param.h' must also
+ *       be changed to match below.
+ */
+#define CLOCK_TICK_RATE		128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
new file mode 100644
index 00000000000..591c962bb31
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-l7200/include/mach/uncompress.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-01-2000	SJH	Created
+ *  05-13-2000	SJH	Filled in function bodies
+ *  07-26-2000	SJH	Removed hard coded baud rate
+ */
+
+#include <mach/hardware.h>
+
+#define IO_UART  IO_START + 0x00044000
+
+#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
+#define __raw_readb(p)		(*(volatile unsigned char *)(p))
+
+static inline void putc(int c)
+{
+	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
+	      __raw_readb(IO_UART + 0x18) & 0x08)
+		barrier();
+
+	__raw_writeb(c, IO_UART + 0x00);
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
+	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
+	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
new file mode 100644
index 00000000000..85f0abbf15f
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-l7200/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 2ef7d0097b3..551b9726182 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index fe64946f9e1..e373fb8e269 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index 1992db4c252..a2a543258fc 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -17,14 +17,13 @@
 
 //#include <linux/module.h>
 //#include <linux/time.h>
-//#include <asm/hardware.h>
 
 //#include <asm/mach/time.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 7530a95c15a..4fb23ac6b5a 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -9,8 +9,8 @@
  */
 
 #include <linux/cpufreq.h>
-#include <asm/hardware.h>
-#include <asm/arch/clocks.h>
+#include <mach/hardware.h>
+#include <mach/clocks.h>
 #include <linux/err.h>
 
 struct module;
diff --git a/arch/arm/mach-lh7a40x/include/mach/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h
new file mode 100644
index 00000000000..fe2e0255c08
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/clocks.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-lh7a40x/include/mach/clocks.h
+ *
+ *  Copyright (C) 2004 Marc Singer
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CLOCKS_H
+#define __ASM_ARCH_CLOCKS_H
+
+unsigned int fclkfreq_get (void);
+unsigned int hclkfreq_get (void);
+unsigned int pclkfreq_get (void);
+
+#endif  /* _ASM_ARCH_CLOCKS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h
new file mode 100644
index 00000000000..55c6edbc2df
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/constants.h
@@ -0,0 +1,91 @@
+/* arch/arm/mach-lh7a40x/include/mach/constants.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CONSTANTS_H
+#define __ASM_ARCH_CONSTANTS_H
+
+
+/* Addressing constants */
+
+	/* SoC CPU IO addressing */
+#define IO_PHYS			(0x80000000)
+#define IO_VIRT			(0xf8000000)
+#define IO_SIZE			(0x0000B000)
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_PHYS		(0x20000000)
+# define CPLD_VIRT		(0xf2000000)
+# define CPLD_SIZE		PAGE_SIZE
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define IOBARRIER_PHYS		0x10000000 /* Second bank, fastest timing */
+# define IOBARRIER_VIRT		0xf0000000
+# define IOBARRIER_SIZE		PAGE_SIZE
+
+# define CF_PHYS		0x60200000
+# define CF_VIRT		0xf6020000
+# define CF_SIZE		(8*1024)
+
+	/* The IO mappings for the LPD CPLD are, unfortunately, sparse.  */
+# define CPLDX_PHYS(x)		(0x70000000 | ((x) << 20))
+# define CPLDX_VIRT(x)		(0xf7000000 | ((x) << 16))
+# define CPLD00_PHYS		CPLDX_PHYS (0x00) /* Wired LAN */
+# define CPLD00_VIRT		CPLDX_VIRT (0x00)
+# define CPLD00_SIZE		PAGE_SIZE
+# define CPLD02_PHYS		CPLDX_PHYS (0x02)
+# define CPLD02_VIRT		CPLDX_VIRT (0x02)
+# define CPLD02_SIZE		PAGE_SIZE
+# define CPLD06_PHYS		CPLDX_PHYS (0x06)
+# define CPLD06_VIRT		CPLDX_VIRT (0x06)
+# define CPLD06_SIZE		PAGE_SIZE
+# define CPLD08_PHYS		CPLDX_PHYS (0x08)
+# define CPLD08_VIRT		CPLDX_VIRT (0x08)
+# define CPLD08_SIZE		PAGE_SIZE
+# define CPLD0A_PHYS		CPLDX_PHYS (0x0a)
+# define CPLD0A_VIRT		CPLDX_VIRT (0x0a)
+# define CPLD0A_SIZE		PAGE_SIZE
+# define CPLD0C_PHYS		CPLDX_PHYS (0x0c)
+# define CPLD0C_VIRT		CPLDX_VIRT (0x0c)
+# define CPLD0C_SIZE		PAGE_SIZE
+# define CPLD0E_PHYS		CPLDX_PHYS (0x0e)
+# define CPLD0E_VIRT		CPLDX_VIRT (0x0e)
+# define CPLD0E_SIZE		PAGE_SIZE
+# define CPLD10_PHYS		CPLDX_PHYS (0x10)
+# define CPLD10_VIRT		CPLDX_VIRT (0x10)
+# define CPLD10_SIZE		PAGE_SIZE
+# define CPLD12_PHYS		CPLDX_PHYS (0x12)
+# define CPLD12_VIRT		CPLDX_VIRT (0x12)
+# define CPLD12_SIZE		PAGE_SIZE
+# define CPLD14_PHYS		CPLDX_PHYS (0x14)
+# define CPLD14_VIRT		CPLDX_VIRT (0x14)
+# define CPLD14_SIZE		PAGE_SIZE
+# define CPLD16_PHYS		CPLDX_PHYS (0x16)
+# define CPLD16_VIRT		CPLDX_VIRT (0x16)
+# define CPLD16_SIZE		PAGE_SIZE
+# define CPLD18_PHYS		CPLDX_PHYS (0x18)
+# define CPLD18_VIRT		CPLDX_VIRT (0x18)
+# define CPLD18_SIZE		PAGE_SIZE
+# define CPLD1A_PHYS		CPLDX_PHYS (0x1a)
+# define CPLD1A_VIRT		CPLDX_VIRT (0x1a)
+# define CPLD1A_SIZE		PAGE_SIZE
+#endif
+
+	/* Timing constants */
+
+#define	XTAL_IN			14745600	/* 14.7456 MHz crystal */
+#define PLL_CLOCK		(XTAL_IN * 21)	/* 309 MHz PLL clock */
+#define MAX_HCLK_KHZ		100000		/* HCLK max limit ~100MHz */
+#define HCLK			(99993600)
+//#define HCLK			(119808000)
+
+#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
new file mode 100644
index 00000000000..85141ed5383
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+	@ It is not known if this will be appropriate for every 40x
+	@ board.
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1                 @ MMU enabled?
+		mov     \rx, #0x00000700        @ offset from base
+		orreq   \rx, \rx, #0x80000000   @ physical base
+		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.endm
+
+		.macro  senduart,rd,rx
+		strb    \rd, [\rx]              @ DATA
+		.endm
+
+		.macro  busyuart,rd,rx          @ spin while busy
+1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
+		bne     1001b                   @ yes, spin
+		.endm
+
+		.macro  waituart,rd,rx          @ wait for Tx FIFO room
+1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
+		bne     1001b                   @ yes, spin
+		.endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h
new file mode 100644
index 00000000000..baa3f8dbd04
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/dma.h
@@ -0,0 +1,86 @@
+/* arch/arm/mach-lh7a40x/include/mach/dma.h
+ *
+ *  Copyright (C) 2005 Marc Singer
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+typedef enum {
+	DMA_M2M0	= 0,
+	DMA_M2M1	= 1,
+	DMA_M2P0	= 2,	/* Tx */
+	DMA_M2P1	= 3,	/* Rx */
+	DMA_M2P2	= 4,	/* Tx */
+	DMA_M2P3	= 5,	/* Rx */
+	DMA_M2P4	= 6,	/* Tx - AC97 */
+	DMA_M2P5	= 7,	/* Rx - AC97 */
+	DMA_M2P6	= 8,	/* Tx */
+	DMA_M2P7	= 9,	/* Rx */
+} dma_device_t;
+
+#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
+
+#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
+#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
+
+#define DMAC_GIR_MMI1		(1<<11)
+#define DMAC_GIR_MMI0		(1<<10)
+#define DMAC_GIR_MPI8		(1<<9)
+#define DMAC_GIR_MPI9		(1<<8)
+#define DMAC_GIR_MPI6		(1<<7)
+#define DMAC_GIR_MPI7		(1<<6)
+#define DMAC_GIR_MPI4		(1<<5)
+#define DMAC_GIR_MPI5		(1<<4)
+#define DMAC_GIR_MPI2		(1<<3)
+#define DMAC_GIR_MPI3		(1<<2)
+#define DMAC_GIR_MPI0		(1<<1)
+#define DMAC_GIR_MPI1		(1<<0)
+
+#define DMAC_M2P0		0x0000
+#define DMAC_M2P1		0x0040
+#define DMAC_M2P2		0x0080
+#define DMAC_M2P3		0x00c0
+#define DMAC_M2P4		0x0240
+#define DMAC_M2P5		0x0200
+#define DMAC_M2P6		0x02c0
+#define DMAC_M2P7		0x0280
+#define DMAC_M2P8		0x0340
+#define DMAC_M2P9		0x0300
+#define DMAC_M2M0		0x0100
+#define DMAC_M2M1		0x0140
+
+#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
+#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
+#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
+#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
+#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
+#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
+#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
+#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
+#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
+#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
+#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
+
+#define DMAC_PCONTROL_ENABLE	(1<<4)
+
+#define DMAC_PORT_USB		0
+#define DMAC_PORT_SDMMC		1
+#define DMAC_PORT_AC97_1	2
+#define DMAC_PORT_AC97_2	3
+#define DMAC_PORT_AC97_3	4
+#define DMAC_PORT_UART1		6
+#define DMAC_PORT_UART2		7
+#define DMAC_PORT_UART3		8
+
+#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
+#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
+
+#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
+#define DMAC_PSTATUS_STALLRINT	 (1<<0)
+
+#define DMAC_INT_CHE		 (1<<3)
+#define DMAC_INT_NFB		 (1<<1)
+#define DMAC_INT_STALL		 (1<<0)
diff --git a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..069bb4cefff
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-lh7a40x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for LH7A40x platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+/* In order to allow there to be support for both of the processor
+   classes at the same time, we make a hack here that isn't very
+   pretty.  At startup, the link pointed to with the
+   branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
+   detected as a lh7a404.
+
+   *** FIXME: we should clean this up so that there is only one
+	      implementation for each CPU's design.
+
+*/
+
+#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+branch_irq_lh7a400: b 1000f
+
+@ Implementation of the LH7A404 get_irqnr_and_base.
+
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+		b	1009f
+
+@ Implementation of the LH7A400 get_irqnr_and_base.
+
+1000:		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+
+1009:
+               .endm
+
+
+
+#elif defined (CONFIG_ARCH_LH7A400)
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+1009:
+               .endm
+
+#elif defined(CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+1009:
+               .endm
+#endif
+
+
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
new file mode 100644
index 00000000000..48e827d2fa5
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -0,0 +1,62 @@
+/* arch/arm/mach-lh7a40x/include/mach/hardware.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ]
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
+
+#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
+#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
+
+#ifdef __ASSEMBLY__
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#else
+
+# if 0
+#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+# else
+/*
+ * This __REG() version gives the same results as the one above,  except
+ * that we are fooling gcc somehow so it generates far better and smaller
+ * assembly code for access to contigous registers.  It's a shame that gcc
+ * doesn't guess this by itself.
+ */
+#include <asm/types.h>
+typedef struct { volatile u32 offset[4096]; } __regbase;
+# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
+# define __REG(x)	__REGP(io_p2v(x))
+typedef struct { volatile u16 offset[4096]; } __regbase16;
+# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
+# define __REG16(x)	__REGP16(io_p2v(x))
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
+# define __REG8(x)	__REGP8(io_p2v(x))
+#endif
+
+/* Let's kick gcc's ass again... */
+# define __REG2(x,y)	\
+	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
+				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#endif
+
+#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
+
+#include "registers.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
new file mode 100644
index 00000000000..031d26f9163
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/io.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-lh7a40x/include/mach/io.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* No ISA or PCI bus on this machine. */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h
new file mode 100644
index 00000000000..0f9b8367593
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/irqs.h
@@ -0,0 +1,200 @@
+/* arch/arm/mach-lh7a40x/include/mach/irqs.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/* It is to be seen whether or not we can build a kernel for more than
+ * one board.  For the time being, these macros assume that we cannot.
+ * Thus, it is OK to ifdef machine/board specific IRQ assignments.
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define FIQ_START	80
+
+#if defined (CONFIG_ARCH_LH7A400)
+
+  /* FIQs */
+
+# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
+# define IRQ_BLINT	1	/* Battery Low */
+# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
+# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
+
+  /* IRQs */
+
+# define IRQ_CSINT	4	/* Audio Codec (ACI) */
+# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
+# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
+# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
+# define IRQ_T1UI	8	/* Timer 1 underflow */
+# define IRQ_T2UI	9	/* Timer 2 underflow */
+# define IRQ_RTCMI	10
+# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
+# define IRQ_UART1INTR	12
+# define IRQ_UART2INTR	13
+# define IRQ_LCDINTR	14
+# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
+# define IRQ_UART3INTR	16
+# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
+# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
+# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
+# define IRQ_USBINTR	20
+# define IRQ_DMAINTR	21
+# define IRQ_T3UI	22	/* Timer 3 underflow */
+# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
+# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
+# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
+# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
+# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
+
+# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
+
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+
+# define IRQ_BROWN	0	/* Brownout */
+# define IRQ_WDTINTR	1	/* Watchdog Timer */
+# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
+# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
+# define IRQ_T1UI	4	/* Timer 1 underflow */
+# define IRQ_T2UI	5	/* Timer 2 underflow */
+# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
+# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
+# define IRQ_DMAM2P1	8
+# define IRQ_DMAM2P2	9
+# define IRQ_DMAM2P3	10
+# define IRQ_DMAM2P4	11
+# define IRQ_DMAM2P5	12
+# define IRQ_DMAM2P6	13
+# define IRQ_DMAM2P7	14
+# define IRQ_DMAM2P8	15
+# define IRQ_DMAM2P9	16
+# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
+# define IRQ_DMAM2M1	18
+# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
+# define IRQ_GPIO1INTR	20
+# define IRQ_GPIO2INTR	21
+# define IRQ_GPIO3INTR	22
+# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
+# define IRQ_SOFT_V1_24	24
+# define IRQ_SOFT_V1_25	25
+# define IRQ_SOFT_V1_26	26
+# define IRQ_SOFT_V1_27	27
+# define IRQ_SOFT_V1_28	28
+# define IRQ_SOFT_V1_29	29
+# define IRQ_SOFT_V1_30	30
+# define IRQ_SOFT_V1_31	31
+
+# define IRQ_BLINT	32	/* Battery Low */
+# define IRQ_BMIINTR	33	/* Battery Monitor */
+# define IRQ_MCINTR	34	/* Media Change */
+# define IRQ_TINTR	35	/* 64Hz Tick */
+# define IRQ_WEINT	36	/* Watchdog Expired */
+# define IRQ_RTCMI	37	/* Real-time Clock Match */
+# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
+# define IRQ_UART1ERR	39	/* UART1 Error */
+# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
+# define IRQ_UART2ERR	41	/* UART2 Error */
+# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
+# define IRQ_UART3ERR	43	/* UART3 Error */
+# define IRQ_SCIINTR	44	/* Smart Card */
+# define IRQ_TSCINTR	45	/* Touchscreen */
+# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
+# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
+# define IRQ_GPIO5INTR	48
+# define IRQ_GPIO6INTR	49
+# define IRQ_GPIO7INTR	50
+# define IRQ_T3UI	51	/* Timer 3 underflow */
+# define IRQ_LCDINTR	52	/* LCD Controller */
+# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
+# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
+# define IRQ_USBINTR	55	/* USB Device Port */
+# define IRQ_USHINTR	56	/* USB Host Port */
+# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
+# define IRQ_SOFT_V2_26	58
+# define IRQ_SOFT_V2_27	59
+# define IRQ_SOFT_V2_28	60
+# define IRQ_SOFT_V2_29	61
+# define IRQ_SOFT_V2_30	62
+# define IRQ_SOFT_V2_31	63
+
+# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- IRQ_GPIO0INTR)
+
+			/* Vector Address constants */
+# define VA_VECTORED	0x100	/* Set for vectored interrupt */
+# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
+# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
+
+#endif
+
+  /* IRQ aliases */
+
+#if !defined (IRQ_GPIO0INTR)
+# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
+#endif
+#define IRQ_TICK	IRQ_TINTR
+#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
+#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
+#define IRQ_USB		IRQ_USBINTR	/* USB device */
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
+# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
+# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
+# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
+# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
+#endif
+
+  /* System specific IRQs */
+
+#define IRQ_BOARD_START NR_IRQ_CPU
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		5
+# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
+# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
+# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
+# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
+# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		2
+# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
+# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400)
+# define IRQ_TOUCH		IRQ_LPD7A400_TS
+#endif
+
+#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
new file mode 100644
index 00000000000..f7107b4c197
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -0,0 +1,76 @@
+/* arch/arm/mach-lh7a40x/include/mach/memory.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ *
+ *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define KVADDR_TO_NID(addr) \
+  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
+   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
+# else  /* 2 banks per node */
+#  define KVADDR_TO_NID(addr) \
+      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
+# endif
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define PFN_TO_NID(pfn) \
+  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
+ | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
+# else  /* 2 banks per node */
+#  define PFN_TO_NID(pfn) \
+    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
+#endif
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
+# else  /* 2 banks per node */
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
+# endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h
new file mode 100644
index 00000000000..ea44396383a
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/registers.h
@@ -0,0 +1,224 @@
+/* arch/arm/mach-lh7a40x/include/mach/registers.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#ifndef __ASM_ARCH_REGISTERS_H
+#define __ASM_ARCH_REGISTERS_H
+
+
+	/* Physical register base addresses */
+
+#define AC97C_PHYS	(0x80000000)	/* AC97 Controller */
+#define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
+#define USB_PHYS	(0x80000200)	/* USB Client */
+#define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
+#define CSC_PHYS	(0x80000400)	/* Clock/State Controller  */
+#define INTC_PHYS	(0x80000500)	/* Interrupt Controller */
+#define UART1_PHYS	(0x80000600)	/* UART1 Controller */
+#define SIR_PHYS	(0x80000600)	/* IR Controller, same are UART1 */
+#define UART2_PHYS	(0x80000700)	/* UART2 Controller */
+#define UART3_PHYS	(0x80000800)	/* UART3 Controller */
+#define DCDC_PHYS	(0x80000900)	/* DC to DC Controller */
+#define ACI_PHYS	(0x80000a00)	/* Audio Codec Interface */
+#define SSP_PHYS	(0x80000b00)	/* Synchronous ... */
+#define TIMER_PHYS	(0x80000c00)	/* Timer Controller */
+#define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
+#define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
+#define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
+#define HRTFTC_PHYS	(0x80001000)	/* High-res TFT Controller (LH7A400) */
+#define ALI_PHYS	(0x80001000)	/* Advanced LCD Interface (LH7A404) */
+#define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
+#define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
+#define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
+#define DMAC_PHYS	(0x80002800)	/* DMA Controller */
+#define CLCDC_PHYS	(0x80003000)	/* Color LCD Controller */
+
+	/* Physical registers of the LH7A404 */
+
+#define ADC_PHYS	(0x80001300)	/* A/D & Touchscreen Controller */
+#define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
+#define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
+#define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */
+
+/*#define KBD_PHYS	(0x80000e00) */
+/*#define LCDICP_PHYS	(0x80001000) */
+
+
+	/* Clock/State Controller register */
+
+#define CSC_PWRSR	__REG(CSC_PHYS + 0x00) /* Reset register & ID */
+#define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
+#define CSC_CLKSET	__REG(CSC_PHYS + 0x20) /* Clock speed control */
+#define CSC_USBDRESET	__REG(CSC_PHYS + 0x4c) /* USB Device resets */
+
+#define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
+#define CSC_PWRCNT_DMAC_M2M1_EN	(1<<27)
+#define CSC_PWRCNT_DMAC_M2M0_EN	(1<<26)
+#define CSC_PWRCNT_DMAC_M2P8_EN	(1<<25)
+#define CSC_PWRCNT_DMAC_M2P9_EN	(1<<24)
+#define CSC_PWRCNT_DMAC_M2P6_EN	(1<<23)
+#define CSC_PWRCNT_DMAC_M2P7_EN	(1<<22)
+#define CSC_PWRCNT_DMAC_M2P4_EN	(1<<21)
+#define CSC_PWRCNT_DMAC_M2P5_EN	(1<<20)
+#define CSC_PWRCNT_DMAC_M2P2_EN	(1<<19)
+#define CSC_PWRCNT_DMAC_M2P3_EN	(1<<18)
+#define CSC_PWRCNT_DMAC_M2P0_EN	(1<<17)
+#define CSC_PWRCNT_DMAC_M2P1_EN	(1<<16)
+
+#define CSC_PWRSR_CHIPMAN_SHIFT	(24)
+#define CSC_PWRSR_CHIPMAN_MASK	(0xff)
+#define CSC_PWRSR_CHIPID_SHIFT	(16)
+#define CSC_PWRSR_CHIPID_MASK	(0xff)
+
+#define CSC_USBDRESET_APBRESETREG	(1<<1)
+#define CSC_USBDRESET_IORESETREG	(1<<0)
+
+	/* Interrupt Controller registers */
+
+#define INTC_INTSR	__REG(INTC_PHYS + 0x00)	/* Status */
+#define INTC_INTRSR	__REG(INTC_PHYS + 0x04)	/* Raw Status */
+#define INTC_INTENS	__REG(INTC_PHYS + 0x08)	/* Enable Set */
+#define INTC_INTENC	__REG(INTC_PHYS + 0x0c)	/* Enable Clear */
+
+
+	/* Vectored Interrupted Controller registers */
+
+#define VIC1_IRQSTATUS	__REG(VIC1_PHYS + 0x00)
+#define VIC1_FIQSTATUS	__REG(VIC1_PHYS + 0x04)
+#define VIC1_RAWINTR	__REG(VIC1_PHYS + 0x08)
+#define VIC1_INTSEL	__REG(VIC1_PHYS + 0x0c)
+#define VIC1_INTEN	__REG(VIC1_PHYS + 0x10)
+#define VIC1_INTENCLR	__REG(VIC1_PHYS + 0x14)
+#define VIC1_SOFTINT	__REG(VIC1_PHYS + 0x18)
+#define VIC1_SOFTINTCLR	__REG(VIC1_PHYS + 0x1c)
+#define VIC1_PROTECT	__REG(VIC1_PHYS + 0x20)
+#define VIC1_VECTADDR	__REG(VIC1_PHYS + 0x30)
+#define VIC1_NVADDR	__REG(VIC1_PHYS + 0x34)
+#define VIC1_VAD0	__REG(VIC1_PHYS + 0x100)
+#define VIC1_VECTCNTL0	__REG(VIC1_PHYS + 0x200)
+#define VIC2_IRQSTATUS	__REG(VIC2_PHYS + 0x00)
+#define VIC2_FIQSTATUS	__REG(VIC2_PHYS + 0x04)
+#define VIC2_RAWINTR	__REG(VIC2_PHYS + 0x08)
+#define VIC2_INTSEL	__REG(VIC2_PHYS + 0x0c)
+#define VIC2_INTEN	__REG(VIC2_PHYS + 0x10)
+#define VIC2_INTENCLR	__REG(VIC2_PHYS + 0x14)
+#define VIC2_SOFTINT	__REG(VIC2_PHYS + 0x18)
+#define VIC2_SOFTINTCLR	__REG(VIC2_PHYS + 0x1c)
+#define VIC2_PROTECT	__REG(VIC2_PHYS + 0x20)
+#define VIC2_VECTADDR	__REG(VIC2_PHYS + 0x30)
+#define VIC2_NVADDR	__REG(VIC2_PHYS + 0x34)
+#define VIC2_VAD0	__REG(VIC2_PHYS + 0x100)
+#define VIC2_VECTCNTL0	__REG(VIC2_PHYS + 0x200)
+
+#define VIC_CNTL_ENABLE	(0x20)
+
+	/* USB Host registers (Open HCI compatible) */
+
+#define USBH_CMDSTATUS	__REG(USBH_PHYS + 0x08)
+
+
+	/* GPIO registers */
+
+#define GPIO_INTTYPE1	__REG(GPIO_PHYS + 0x4c)	/* Interrupt Type 1 (Edge) */
+#define GPIO_INTTYPE2	__REG(GPIO_PHYS + 0x50)	/* Interrupt Type 2 */
+#define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
+#define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
+#define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
+#define GPIO_PINMUX	__REG(GPIO_PHYS + 0x2c)
+#define GPIO_PADD	__REG(GPIO_PHYS + 0x10)
+#define GPIO_PAD	__REG(GPIO_PHYS + 0x00)
+#define GPIO_PCD	__REG(GPIO_PHYS + 0x08)
+#define GPIO_PCDD	__REG(GPIO_PHYS + 0x18)
+#define GPIO_PEDD	__REG(GPIO_PHYS + 0x24)
+#define GPIO_PED	__REG(GPIO_PHYS + 0x20)
+
+
+	/* Static Memory Controller registers */
+
+#define SMC_BCR0	__REG(SMC_PHYS + 0x00)	/* Bank 0 Configuration */
+#define SMC_BCR1	__REG(SMC_PHYS + 0x04)	/* Bank 1 Configuration */
+#define SMC_BCR2	__REG(SMC_PHYS + 0x08)	/* Bank 2 Configuration */
+#define SMC_BCR3	__REG(SMC_PHYS + 0x0C)	/* Bank 3 Configuration */
+#define SMC_BCR6	__REG(SMC_PHYS + 0x18)	/* Bank 6 Configuration */
+#define SMC_BCR7	__REG(SMC_PHYS + 0x1c)	/* Bank 7 Configuration */
+
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_RD_OPT_DIP_SW	__REG16(CPLD_PHYS + 0x00) /* Read Option SW */
+# define CPLD_WR_IO_BRD_CTL	__REG16(CPLD_PHYS + 0x00) /* Write Control */
+# define CPLD_RD_PB_KEYS	__REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
+# define CPLD_LATCHED_INTS	__REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
+# define CPLD_CL_INT		__REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
+# define CPLD_BOOT_MMC_STATUS	__REG16(CPLD_PHYS + 0x06) /* R/O */
+# define CPLD_RD_KPD_ROW_SENSE	__REG16(CPLD_PHYS + 0x08)
+# define CPLD_WR_PB_INT_MASK	__REG16(CPLD_PHYS + 0x08)
+# define CPLD_RD_BRD_DISP_SW	__REG16(CPLD_PHYS + 0x0a)
+# define CPLD_WR_EXT_INT_MASK	__REG16(CPLD_PHYS + 0x0a)
+# define CPLD_LCD_PWR_CNTL	__REG16(CPLD_PHYS + 0x0c)
+# define CPLD_SEVEN_SEG		__REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
+
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define CPLD_CONTROL		__REG16(CPLD02_PHYS)
+# define CPLD_SPI_DATA		__REG16(CPLD06_PHYS)
+# define CPLD_SPI_CONTROL	__REG16(CPLD08_PHYS)
+# define CPLD_SPI_EEPROM	__REG16(CPLD0A_PHYS)
+# define CPLD_INTERRUPTS	__REG16(CPLD0C_PHYS) /* IRQ mask/status */
+# define CPLD_BOOT_MODE		__REG16(CPLD0E_PHYS)
+# define CPLD_FLASH		__REG16(CPLD10_PHYS)
+# define CPLD_POWER_MGMT	__REG16(CPLD12_PHYS)
+# define CPLD_REVISION		__REG16(CPLD14_PHYS)
+# define CPLD_GPIO_EXT		__REG16(CPLD16_PHYS)
+# define CPLD_GPIO_DATA		__REG16(CPLD18_PHYS)
+# define CPLD_GPIO_DIR		__REG16(CPLD1A_PHYS)
+
+#endif
+
+	/* Timer registers */
+
+#define TIMER_LOAD1	__REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
+#define TIMER_VALUE1	__REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
+#define TIMER_CONTROL1	__REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
+#define TIMER_EOI1	__REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
+
+#define TIMER_LOAD2	__REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
+#define TIMER_VALUE2	__REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
+#define TIMER_CONTROL2	__REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
+#define TIMER_EOI2	__REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
+
+#define TIMER_BUZZCON	__REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
+
+#define TIMER_LOAD3	__REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
+#define TIMER_VALUE3	__REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
+#define TIMER_CONTROL3	__REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
+#define TIMER_EOI3	__REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
+
+#define TIMER_C_ENABLE		(1<<7)
+#define TIMER_C_PERIODIC	(1<<6)
+#define TIMER_C_FREERUNNING	(0)
+#define TIMER_C_2KHZ		(0x00)		/* 1.986 kHz */
+#define TIMER_C_508KHZ		(0x08)
+
+	/* GPIO registers */
+
+#define GPIO_PFDD		__REG(GPIO_PHYS + 0x34)	/* PF direction */
+#define GPIO_INTTYPE1		__REG(GPIO_PHYS + 0x4c)	/* IRQ edge or lvl  */
+#define GPIO_INTTYPE2		__REG(GPIO_PHYS + 0x50)	/* IRQ activ hi/lo */
+#define GPIO_GPIOFEOI		__REG(GPIO_PHYS + 0x54)	/* GPIOF end of IRQ */
+#define GPIO_GPIOFINTEN		__REG(GPIO_PHYS + 0x58)	/* GPIOF IRQ enable */
+#define GPIO_INTSTATUS		__REG(GPIO_PHYS + 0x5c)	/* GPIOF IRQ latch */
+#define GPIO_RAWINTSTATUS	__REG(GPIO_PHYS + 0x60)	/* GPIOF IRQ raw */
+
+
+#endif  /* _ASM_ARCH_REGISTERS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h
new file mode 100644
index 00000000000..509916182e3
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/ssp.h
@@ -0,0 +1,70 @@
+/* ssp.h
+
+   written by Marc Singer
+   6 Dec 2004
+
+   Copyright (C) 2004 Marc Singer
+
+   -----------
+   DESCRIPTION
+   -----------
+
+   This SSP header is available throughout the kernel, for this
+   machine/architecture, because drivers that use it may be dispersed.
+
+   This file was cloned from the 7952x implementation.  It would be
+   better to share them, but we're taking an easier approach for the
+   time being.
+
+*/
+
+#if !defined (__SSP_H__)
+#    define   __SSP_H__
+
+/* ----- Includes */
+
+/* ----- Types */
+
+struct ssp_driver {
+	int  (*init)		(void);
+	void (*exit)		(void);
+	void (*acquire)		(void);
+	void (*release)		(void);
+	int  (*configure)	(int device, int mode, int speed,
+				 int frame_size_write, int frame_size_read);
+	void (*chip_select)	(int enable);
+	void (*set_callbacks)   (void* handle,
+				 irqreturn_t (*callback_tx)(void*),
+				 irqreturn_t (*callback_rx)(void*));
+	void (*enable)		(void);
+	void (*disable)		(void);
+//	int  (*save_state)	(void*);
+//	void (*restore_state)	(void*);
+	int  (*read)		(void);
+	int  (*write)		(u16 data);
+	int  (*write_read)	(u16 data);
+	void (*flush)		(void);
+	void (*write_async)	(void* pv, size_t cb);
+	size_t (*write_pos)	(void);
+};
+
+	/* These modes are only available on the LH79524 */
+#define SSP_MODE_SPI		(1)
+#define SSP_MODE_SSI		(2)
+#define SSP_MODE_MICROWIRE	(3)
+#define SSP_MODE_I2S		(4)
+
+	/* CPLD SPI devices */
+#define DEVICE_EEPROM	0	/* Configuration eeprom */
+#define DEVICE_MAC	1	/* MAC eeprom (LPD79524) */
+#define DEVICE_CODEC	2	/* Audio codec */
+#define DEVICE_TOUCH	3	/* Touch screen (LPD79520) */
+
+/* ----- Globals */
+
+/* ----- Prototypes */
+
+//extern struct ssp_driver lh79520_i2s_driver;
+extern struct ssp_driver lh7a400_cpld_ssp_driver;
+
+#endif  /* __SSP_H__ */
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
new file mode 100644
index 00000000000..fa46bb1ef07
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-lh7a40x/include/mach/system.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle ();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset (0);
+}
diff --git a/arch/arm/mach-lh7a40x/include/mach/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h
new file mode 100644
index 00000000000..08028cef1b3
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/timex.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-lh7a40x/include/mach/timex.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
+
+/*
+#define CLOCK_TICK_RATE		3686400
+*/
diff --git a/arch/arm/mach-lh7a40x/include/mach/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
new file mode 100644
index 00000000000..55b80d479eb
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-lh7a40x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/registers.h>
+
+#ifndef UART_R_DATA
+# define UART_R_DATA	(0x00)
+#endif
+#ifndef UART_R_STATUS
+# define UART_R_STATUS	(0x10)
+#endif
+#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
+
+	/* Access UART with physical addresses before MMU is setup */
+#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
+#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
+
+static inline void putc(int ch)
+{
+	while (UART_STATUS & nTxRdy)
+		barrier();
+	UART_DATA = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+	/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..3fbd49490bb
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index 9472bbebd8a..1ad3afcf6b3 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 9b28389035e..12b045b688c 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 66e1ed3961e..0d5063ebda1 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -13,10 +13,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
index df6e38ed425..a7f5027b2f7 100644
--- a/arch/arm/mach-lh7a40x/lcd-panel.h
+++ b/arch/arm/mach-lh7a40x/lcd-panel.h
@@ -1,5 +1,4 @@
 /* lcd-panel.h
-     $Id$
 
    written by Marc Singer
    18 Jul 2005
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
index a10830186da..51fbef9601b 100644
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -46,9 +46,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/ssp.h>
+#include <mach/ssp.h>
 
 //#define TALK
 
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index e50e60b3385..7fe9e06cf66 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -14,7 +14,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index ba25e56ade5..70ca56bb6f3 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
index 410f50399dd..c0d2d9d12e7 100644
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -18,9 +18,9 @@
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/loki.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/loki.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
new file mode 100644
index 00000000000..a8c20bd2f95
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-loki/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/loki.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =LOKI_REGS_PHYS_BASE
+	ldrne	\rx, =LOKI_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-loki/include/mach/dma.h b/arch/arm/mach-loki/include/mach/dma.h
new file mode 100644
index 00000000000..40a8c178f10
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
new file mode 100644
index 00000000000..332af38ec13
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-loki/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/loki.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_OFF]
+	mov	\irqnr, #0
+	ands	\irqstat, \irqstat, \tmp
+	clzne	\irqnr, \irqstat
+	rsbne	\irqnr, \irqnr, #31
+	.endm
diff --git a/arch/arm/mach-loki/include/mach/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h
new file mode 100644
index 00000000000..d7bfc8f1772
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/hardware.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-loki/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "loki.h"
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/io.h b/arch/arm/mach-loki/include/mach/io.h
new file mode 100644
index 00000000000..a373cd582c8
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-loki/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "loki.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
+					+ LOKI_PCIE0_IO_VIRT_BASE);
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h
new file mode 100644
index 00000000000..9fbd3326867
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/irqs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-loki/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "loki.h"	/* need GPIO_MAX */
+
+/*
+ * Interrupt Controller
+ */
+#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
+#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
+#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
+#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
+#define IRQ_LOKI_COM_A_ERR		6
+#define IRQ_LOKI_COM_A_IN		7
+#define IRQ_LOKI_COM_A_OUT		8
+#define IRQ_LOKI_COM_B_ERR		9
+#define IRQ_LOKI_COM_B_IN		10
+#define IRQ_LOKI_COM_B_OUT		11
+#define IRQ_LOKI_DMA_A			12
+#define IRQ_LOKI_DMA_B			13
+#define IRQ_LOKI_SAS_A			14
+#define IRQ_LOKI_SAS_B			15
+#define IRQ_LOKI_DDR			16
+#define IRQ_LOKI_XOR			17
+#define IRQ_LOKI_BRIDGE			18
+#define IRQ_LOKI_PCIE_A_ERR		20
+#define IRQ_LOKI_PCIE_A_INT		21
+#define IRQ_LOKI_PCIE_B_ERR		22
+#define IRQ_LOKI_PCIE_B_INT		23
+#define IRQ_LOKI_GBE_A_INT		24
+#define IRQ_LOKI_GBE_B_INT		25
+#define IRQ_LOKI_DEV_ERR		26
+#define IRQ_LOKI_UART0			27
+#define IRQ_LOKI_UART1			28
+#define IRQ_LOKI_TWSI			29
+#define IRQ_LOKI_GPIO_23_0		30
+#define IRQ_LOKI_GPIO_25_24		31
+
+/*
+ * Loki General Purpose Pins
+ */
+#define IRQ_LOKI_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h
new file mode 100644
index 00000000000..c00af6ba557
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/loki.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-loki/include/mach/loki.h
+ *
+ * Generic definitions for Marvell Loki (88RC8480) SoC flavors
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_LOKI_H
+#define __ASM_ARCH_LOKI_H
+
+/*
+ * Marvell Loki (88RC8480) address maps.
+ *
+ * phys
+ * d0000000	on-chip peripheral registers
+ * e0000000	PCIe 0 Memory space
+ * e8000000	PCIe 1 Memory space
+ * f0000000	PCIe 0 I/O space
+ * f0100000	PCIe 1 I/O space
+ *
+ * virt		phys		size
+ * fed00000	d0000000	1M	on-chip peripheral registers
+ * fee00000	f0000000	64K	PCIe 0 I/O space
+ * fef00000	f0100000	64K	PCIe 1 I/O space
+ */
+
+#define LOKI_REGS_PHYS_BASE		0xd0000000
+#define LOKI_REGS_VIRT_BASE		0xfed00000
+#define LOKI_REGS_SIZE			SZ_1M
+
+#define LOKI_PCIE0_IO_PHYS_BASE		0xf0000000
+#define LOKI_PCIE0_IO_VIRT_BASE		0xfee00000
+#define LOKI_PCIE0_IO_BUS_BASE		0x00000000
+#define LOKI_PCIE0_IO_SIZE		SZ_64K
+
+#define LOKI_PCIE1_IO_PHYS_BASE		0xf0100000
+#define LOKI_PCIE1_IO_VIRT_BASE		0xfef00000
+#define LOKI_PCIE1_IO_BUS_BASE		0x00000000
+#define LOKI_PCIE1_IO_SIZE		SZ_64K
+
+#define LOKI_PCIE0_MEM_PHYS_BASE	0xe0000000
+#define LOKI_PCIE0_MEM_SIZE		SZ_128M
+
+#define LOKI_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define LOKI_PCIE1_MEM_SIZE		SZ_128M
+
+/*
+ * Register Map
+ */
+#define DEV_BUS_PHYS_BASE	(LOKI_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x10000)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+
+#define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
+#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	0x0004
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_OFF		0x0000
+#define   IRQ_MASK_OFF		0x0004
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+
+#define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
+
+#define PCIE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x40000)
+
+#define SAS0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x80000)
+
+#define SAS1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x90000)
+
+#define GE0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xa0000)
+#define GE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xa0000)
+
+#define GE1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xb0000)
+#define GE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xb0000)
+
+#define DDR_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xf0000)
+#define DDR_REG(x)		(DDR_VIRT_BASE | (x))
+
+
+#define GPIO_MAX		8
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h
new file mode 100644
index 00000000000..a39533ab489
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-loki/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
new file mode 100644
index 00000000000..8db1147d4ec
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-loki/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/loki.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/timex.h b/arch/arm/mach-loki/include/mach/timex.h
new file mode 100644
index 00000000000..9df21091529
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-loki/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define LOKI_TCLK		180000000
diff --git a/arch/arm/mach-loki/include/mach/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h
new file mode 100644
index 00000000000..90b2a7e65da
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-loki/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/loki.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
new file mode 100644
index 00000000000..8dc3bfcbf9f
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-loki/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
index d839af91fe0..5a487930cb2 100644
--- a/arch/arm/mach-loki/irq.c
+++ b/arch/arm/mach-loki/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init loki_init_irq(void)
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index d1b9e6e6253..2cc9ac9b488 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -19,7 +19,7 @@
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 #include "common.h"
 
 #define LB88RC8480_FLASH_BOOT_CS_BASE	0xf8000000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 86dfb2b5261..995afc4ade4 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -19,14 +19,14 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 #include <asm/delay.h>
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
index 3f5d3362f88..3a511368a5d 100644
--- a/arch/arm/mach-msm/common.c
+++ b/arch/arm/mach-msm/common.c
@@ -28,9 +28,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 struct flash_platform_data msm_nand_data = {
 	.parts		= 0,
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 8b0f339b327..9de08265d97 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -15,7 +15,7 @@
 
 #include <asm/io.h>
 #include <linux/interrupt.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
 
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
index 2b1cb7f1694..6a94f052713 100644
--- a/arch/arm/mach-msm/idle.S
+++ b/arch/arm/mach-msm/idle.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/idle.S
+/* arch/arm/mach-msm/include/mach/idle.S
  *
  * Idle processing for MSM7K - work around bugs with SWFI.
  *
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
new file mode 100644
index 00000000000..a7639493c09
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -0,0 +1,37 @@
+/* arch/arm/mach-msm/include/mach/board.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_BOARD_H
+#define __ASM_ARCH_MSM_BOARD_H
+
+#include <linux/types.h>
+
+/* platform device data structures */
+
+struct msm_mddi_platform_data
+{
+	void (*panel_power)(int on);
+	unsigned has_vsync_irq:1;
+};
+
+/* common init routines for use by arch/arm/mach-msm/board-*.c */
+
+void __init msm_add_devices(void);
+void __init msm_map_common_io(void);
+void __init msm_init_irq(void);
+void __init msm_init_gpio(void);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
new file mode 100644
index 00000000000..528eef4b605
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-msm7200/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+	.macro	addruart,rx
+	@ see if the MMU is enabled and select appropriate base address
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1
+	ldreq	\rx, =MSM_UART1_PHYS
+	ldrne	\rx, =MSM_UART1_BASE
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #0x0C]
+	.endm
+
+	.macro	waituart,rd,rx
+	@ wait for TX_READY
+1:	ldr	\rd, [\rx, #0x08]
+	tst	\rd, #0x04
+	beq	1b
+	.endm
+
+	.macro	busyuart,rd,rx
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
new file mode 100644
index 00000000000..ad1c87f86d1
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -0,0 +1,151 @@
+/* arch/arm/mach-msm/include/mach/dma.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_DMA_H
+
+#include <linux/list.h>
+#include <mach/msm_iomap.h>
+
+struct msm_dmov_cmd {
+	struct list_head list;
+	unsigned int cmdptr;
+	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
+/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+};
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
+/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
+
+
+
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+/* only security domain 3 is available to the ARM11
+ * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
+ */
+
+#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
+#define DMOV_CMD_LIST         (0 << 29) /* does not work */
+#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
+#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
+#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
+#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
+
+#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
+#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
+#define DMOV_RSLT_ERROR       (1 << 3)
+#define DMOV_RSLT_FLUSH       (1 << 2)
+#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
+#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
+
+#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
+#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
+#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
+#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
+#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
+#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
+
+#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
+#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
+#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
+#define DMOV_STATUS_RSLT_VALID       (1 << 1)
+#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
+
+#define DMOV_ISR              DMOV_SD3(0x380, 0)
+
+#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
+#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
+#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
+#define DMOV_CONFIG_IRQ_EN             (1 << 0)
+
+/* channel assignments */
+
+#define DMOV_NAND_CHAN        7
+#define DMOV_NAND_CRCI_CMD    5
+#define DMOV_NAND_CRCI_DATA   4
+
+#define DMOV_SDC1_CHAN        8
+#define DMOV_SDC1_CRCI        6
+
+#define DMOV_SDC2_CHAN        8
+#define DMOV_SDC2_CRCI        7
+
+#define DMOV_TSIF_CHAN        10
+#define DMOV_TSIF_CRCI        10
+
+#define DMOV_USB_CHAN         11
+
+/* no client rate control ifc (eg, ram) */
+#define DMOV_NONE_CRCI        0
+
+
+/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
+ * is going to walk a list of 32bit pointers as described below.  Each
+ * pointer points to a *array* of dmov_s, etc structs.  The last pointer
+ * in the list is marked with CMD_PTR_LP.  The last struct in each array
+ * is marked with CMD_LC (see below).
+ */
+#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
+#define CMD_PTR_LP          (1 << 31) /* last pointer */
+#define CMD_PTR_PT          (3 << 29) /* ? */
+
+/* Single Item Mode */
+typedef struct {
+	unsigned cmd;
+	unsigned src;
+	unsigned dst;
+	unsigned len;
+} dmov_s;
+
+/* Scatter/Gather Mode */
+typedef struct {
+	unsigned cmd;
+	unsigned src_dscr;
+	unsigned dst_dscr;
+	unsigned _reserved;
+} dmov_sg;
+
+/* bits for the cmd field of the above structures */
+
+#define CMD_LC      (1 << 31)  /* last command */
+#define CMD_FR      (1 << 22)  /* force result -- does not work? */
+#define CMD_OCU     (1 << 21)  /* other channel unblock */
+#define CMD_OCB     (1 << 20)  /* other channel block */
+#define CMD_TCB     (1 << 19)  /* ? */
+#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
+#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
+
+#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
+#define CMD_MODE_SG         (1 << 0) /* untested */
+#define CMD_MODE_IND_SG     (2 << 0) /* untested */
+#define CMD_MODE_BOX        (3 << 0) /* untested */
+
+#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
+#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
+#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
+
+#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
+#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
+#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
+
+#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
+#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
new file mode 100644
index 00000000000..d2259486bcb
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-msm7200/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/msm_iomap.h>
+
+ 	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	mov	\base, #MSM_VIC_BASE
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ 0xD0 has irq# or old irq# if the irq has been handled
+	@ 0xD4 has irq# or -1 if none pending *but* if you just
+	@ read 0xD4 you never get the first irq for some reason
+	ldr	\irqnr, [\base, #0xD0]
+	ldr	\irqnr, [\base, #0xD4]
+	cmp	\irqnr, #0xffffffff
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h
new file mode 100644
index 00000000000..2d126091ae4
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-msm/include/mach/hardware.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HARDWARE_H
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
new file mode 100644
index 00000000000..c6a2feb268b
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-msm/include/mach/io.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __arch_ioremap __msm_ioremap
+#define __arch_iounmap __iounmap
+
+void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)         __io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
new file mode 100644
index 00000000000..9dd4cf8a269
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -0,0 +1,90 @@
+/* arch/arm/mach-msm/include/mach/irqs.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_H
+#define __ASM_ARCH_MSM_IRQS_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221     */
+
+#define INT_A9_M2A_0         0
+#define INT_A9_M2A_1         1
+#define INT_A9_M2A_2         2
+#define INT_A9_M2A_3         3
+#define INT_A9_M2A_4         4
+#define INT_A9_M2A_5         5
+#define INT_A9_M2A_6         6
+#define INT_GP_TIMER_EXP     7
+#define INT_DEBUG_TIMER_EXP  8
+#define INT_UART1            9
+#define INT_UART2            10
+#define INT_UART3            11
+#define INT_UART1_RX         12
+#define INT_UART2_RX         13
+#define INT_UART3_RX         14
+#define INT_USB_OTG          15
+#define INT_MDDI_PRI         16
+#define INT_MDDI_EXT         17
+#define INT_MDDI_CLIENT      18
+#define INT_MDP              19
+#define INT_GRAPHICS         20
+#define INT_ADM_AARM         21
+#define INT_ADSP_A11         22
+#define INT_ADSP_A9_A11      23
+#define INT_SDC1_0           24
+#define INT_SDC1_1           25
+#define INT_SDC2_0           26
+#define INT_SDC2_1           27
+#define INT_KEYSENSE         28
+#define INT_TCHSCRN_SSBI     29
+#define INT_TCHSCRN1         30
+#define INT_TCHSCRN2         31
+
+#define INT_GPIO_GROUP1      (32 + 0)
+#define INT_GPIO_GROUP2      (32 + 1)
+#define INT_PWB_I2C          (32 + 2)
+#define INT_SOFTRESET        (32 + 3)
+#define INT_NAND_WR_ER_DONE  (32 + 4)
+#define INT_NAND_OP_DONE     (32 + 5)
+#define INT_PBUS_ARM11       (32 + 6)
+#define INT_AXI_MPU_SMI      (32 + 7)
+#define INT_AXI_MPU_EBI1     (32 + 8)
+#define INT_AD_HSSD          (32 + 9)
+#define INT_ARM11_PMU        (32 + 10)
+#define INT_ARM11_DMA        (32 + 11)
+#define INT_TSIF_IRQ         (32 + 12)
+#define INT_UART1DM_IRQ      (32 + 13)
+#define INT_UART1DM_RX       (32 + 14)
+#define INT_USB_HS           (32 + 15)
+#define INT_SDC3_0           (32 + 16)
+#define INT_SDC3_1           (32 + 17)
+#define INT_SDC4_0           (32 + 18)
+#define INT_SDC4_1           (32 + 19)
+#define INT_UART2DM_RX       (32 + 20)
+#define INT_UART2DM_IRQ      (32 + 21)
+
+/* 22-31 are reserved */
+
+#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+
+#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
new file mode 100644
index 00000000000..63fd47f2e62
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-msm/include/mach/memory.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET		UL(0x10000000)
+
+/* bus address and physical addresses are identical */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
new file mode 100644
index 00000000000..e221f58ceea
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -0,0 +1,104 @@
+/* arch/arm/mach-msm/include/mach/msm_iomap.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_H
+#define __ASM_ARCH_MSM_IOMAP_H
+
+#include <asm/sizes.h>
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE          0xE0000000
+#define MSM_VIC_PHYS          0xC0000000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          0xE0001000
+#define MSM_CSR_PHYS          0xC0100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_GPT_PHYS          MSM_CSR_PHYS
+#define MSM_GPT_BASE          MSM_CSR_BASE
+#define MSM_GPT_SIZE          SZ_4K
+
+#define MSM_DMOV_BASE         0xE0002000
+#define MSM_DMOV_PHYS         0xA9700000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_UART1_BASE        0xE0003000
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_BASE        0xE0004000
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_BASE        0xE0005000
+#define MSM_UART3_PHYS        0xA9C00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#define MSM_I2C_BASE          0xE0006000
+#define MSM_I2C_PHYS          0xA9900000
+#define MSM_I2C_SIZE          SZ_4K
+
+#define MSM_GPIO1_BASE        0xE0007000
+#define MSM_GPIO1_PHYS        0xA9200000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        0xE0008000
+#define MSM_GPIO2_PHYS        0xA9300000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_HSUSB_BASE        0xE0009000
+#define MSM_HSUSB_PHYS        0xA0800000
+#define MSM_HSUSB_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      0xE000A000
+#define MSM_CLK_CTL_PHYS      0xA8600000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_PMDH_BASE         0xE000B000
+#define MSM_PMDH_PHYS         0xAA600000
+#define MSM_PMDH_SIZE         SZ_4K
+
+#define MSM_EMDH_BASE         0xE000C000
+#define MSM_EMDH_PHYS         0xAA700000
+#define MSM_EMDH_SIZE         SZ_4K
+
+#define MSM_MDP_BASE          0xE0010000
+#define MSM_MDP_PHYS          0xAA200000
+#define MSM_MDP_SIZE          0x000F0000
+
+#define MSM_SHARED_RAM_BASE   0xE0100000
+#define MSM_SHARED_RAM_PHYS   0x01F00000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
new file mode 100644
index 00000000000..f05ad2e0f23
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-msm/include/mach/system.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+
+void arch_idle(void);
+
+static inline void arch_reset(char mode)
+{
+	for (;;) ;  /* depends on IPC w/ other core */
+}
diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h
new file mode 100644
index 00000000000..a62e6b215ae
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/timex.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-msm/include/mach/timex.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_TIMEX_H
+#define __ASM_ARCH_MSM_TIMEX_H
+
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
new file mode 100644
index 00000000000..026e8955ace
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -0,0 +1,36 @@
+/* arch/arm/mach-msm/include/mach/uncompress.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include "hardware.h"
+
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
new file mode 100644
index 00000000000..05f81fd8623
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-msm/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_VMALLOC_H
+#define __ASM_ARCH_MSM_VMALLOC_H
+
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
+#endif
+
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index c39edb994a8..5976200de99 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -19,13 +19,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define MSM_DEVICE(name) { \
 		.virtual = MSM_##name##_BASE, \
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 24158040b78..66901baf8c8 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -21,11 +21,11 @@
 #include <linux/timer.h>
 
 #include <linux/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/io.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #define VIC_REG(off) (MSM_VIC_BASE + (off))
 
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index bd4732d1ab3..9f02d7dca98 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d27b83b7bf6..953a26c469c 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -17,11 +17,11 @@
 #include <linux/ata_platform.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/mv78xx0.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/mv78xx0.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 0c93d19193d..a2d0c978360 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "common.h"
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
new file mode 100644
index 00000000000..a06442fbd34
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/mv78xx0.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
+	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mv78xx0/include/mach/dma.h b/arch/arm/mach-mv78xx0/include/mach/dma.h
new file mode 100644
index 00000000000..40a8c178f10
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
new file mode 100644
index 00000000000..ed4a46bcd3b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell MV78xx0 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/mv78xx0.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
new file mode 100644
index 00000000000..5d887557e12
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "mv78xx0.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h
new file mode 100644
index 00000000000..450e0e1ad09
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "mv78xx0.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
+					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
new file mode 100644
index 00000000000..995d7fb8d06
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "mv78xx0.h"	/* need GPIO_MAX */
+
+/*
+ * MV78xx0 Low Interrupt Controller
+ */
+#define IRQ_MV78XX0_ERR		0
+#define IRQ_MV78XX0_SPI		1
+#define IRQ_MV78XX0_I2C_0	2
+#define IRQ_MV78XX0_I2C_1	3
+#define IRQ_MV78XX0_IDMA_0	4
+#define IRQ_MV78XX0_IDMA_1	5
+#define IRQ_MV78XX0_IDMA_2	6
+#define IRQ_MV78XX0_IDMA_3	7
+#define IRQ_MV78XX0_TIMER_0	8
+#define IRQ_MV78XX0_TIMER_1	9
+#define IRQ_MV78XX0_TIMER_2	10
+#define IRQ_MV78XX0_TIMER_3	11
+#define IRQ_MV78XX0_UART_0	12
+#define IRQ_MV78XX0_UART_1	13
+#define IRQ_MV78XX0_UART_2	14
+#define IRQ_MV78XX0_UART_3	15
+#define IRQ_MV78XX0_USB_0	16
+#define IRQ_MV78XX0_USB_1	17
+#define IRQ_MV78XX0_USB_2	18
+#define IRQ_MV78XX0_CRYPTO	19
+#define IRQ_MV78XX0_SDIO_0	20
+#define IRQ_MV78XX0_SDIO_1	21
+#define IRQ_MV78XX0_XOR_0	22
+#define IRQ_MV78XX0_XOR_1	23
+#define IRQ_MV78XX0_I2S_0	24
+#define IRQ_MV78XX0_I2S_1	25
+#define IRQ_MV78XX0_SATA	26
+#define IRQ_MV78XX0_TDMI	27
+
+/*
+ * MV78xx0 High Interrupt Controller
+ */
+#define IRQ_MV78XX0_PCIE_00	32
+#define IRQ_MV78XX0_PCIE_01	33
+#define IRQ_MV78XX0_PCIE_02	34
+#define IRQ_MV78XX0_PCIE_03	35
+#define IRQ_MV78XX0_PCIE_10	36
+#define IRQ_MV78XX0_PCIE_11	37
+#define IRQ_MV78XX0_PCIE_12	38
+#define IRQ_MV78XX0_PCIE_13	39
+#define IRQ_MV78XX0_GE00_SUM	40
+#define IRQ_MV78XX0_GE00_RX	41
+#define IRQ_MV78XX0_GE00_TX	42
+#define IRQ_MV78XX0_GE00_MISC	43
+#define IRQ_MV78XX0_GE01_SUM	44
+#define IRQ_MV78XX0_GE01_RX	45
+#define IRQ_MV78XX0_GE01_TX	46
+#define IRQ_MV78XX0_GE01_MISC	47
+#define IRQ_MV78XX0_GE10_SUM	48
+#define IRQ_MV78XX0_GE10_RX	49
+#define IRQ_MV78XX0_GE10_TX	50
+#define IRQ_MV78XX0_GE10_MISC	51
+#define IRQ_MV78XX0_GE11_SUM	52
+#define IRQ_MV78XX0_GE11_RX	53
+#define IRQ_MV78XX0_GE11_TX	54
+#define IRQ_MV78XX0_GE11_MISC	55
+#define IRQ_MV78XX0_GPIO_0_7	56
+#define IRQ_MV78XX0_GPIO_8_15	57
+#define IRQ_MV78XX0_GPIO_16_23	58
+#define IRQ_MV78XX0_GPIO_24_31	59
+#define IRQ_MV78XX0_DB_IN	60
+#define IRQ_MV78XX0_DB_OUT	61
+
+/*
+ * MV78XX0 General Purpose Pins
+ */
+#define IRQ_MV78XX0_GPIO_START	64
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
new file mode 100644
index 00000000000..9e47a140ff7
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
new file mode 100644
index 00000000000..ad664178d6e
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+ *
+ * Generic definitions for Marvell MV78xx0 SoC flavors:
+ *  MV781x0 and MV782x0.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MV78XX0_H
+#define __ASM_ARCH_MV78XX0_H
+
+/*
+ * Marvell MV78xx0 address maps.
+ *
+ * phys
+ * c0000000	PCIe Memory space
+ * f0800000	PCIe #0 I/O space
+ * f0900000	PCIe #1 I/O space
+ * f0a00000	PCIe #2 I/O space
+ * f0b00000	PCIe #3 I/O space
+ * f0c00000	PCIe #4 I/O space
+ * f0d00000	PCIe #5 I/O space
+ * f0e00000	PCIe #6 I/O space
+ * f0f00000	PCIe #7 I/O space
+ * f1000000	on-chip peripheral registers
+ *
+ * virt		phys		size
+ * fe400000	f102x000	16K	core-specific peripheral registers
+ * fe700000	f0800000	1M	PCIe #0 I/O space
+ * fe800000	f0900000	1M	PCIe #1 I/O space
+ * fe900000	f0a00000	1M	PCIe #2 I/O space
+ * fea00000	f0b00000	1M	PCIe #3 I/O space
+ * feb00000	f0c00000	1M	PCIe #4 I/O space
+ * fec00000	f0d00000	1M	PCIe #5 I/O space
+ * fed00000	f0e00000	1M	PCIe #6 I/O space
+ * fee00000	f0f00000	1M	PCIe #7 I/O space
+ * fef00000	f1000000	1M	on-chip peripheral registers
+ */
+#define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
+#define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
+#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_SIZE		SZ_16K
+
+#define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_SIZE		SZ_1M
+
+#define MV78XX0_REGS_PHYS_BASE		0xf1000000
+#define MV78XX0_REGS_VIRT_BASE		0xfef00000
+#define MV78XX0_REGS_SIZE		SZ_1M
+
+#define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
+#define MV78XX0_PCIE_MEM_SIZE		0x30000000
+
+/*
+ * Core-specific peripheral registers.
+ */
+#define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define   L2_WRITETHROUGH	0x00020000
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF	0x0004
+#define   IRQ_CAUSE_HIGH_OFF	0x0008
+#define   IRQ_MASK_LOW_OFF	0x0010
+#define   IRQ_MASK_HIGH_OFF	0x0014
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1700)
+
+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
+
+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
+
+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
+
+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
+
+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
+
+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
+
+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
+
+
+#define GPIO_MAX		32
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
new file mode 100644
index 00000000000..7d517940883
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/mv78xx0.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
new file mode 100644
index 00000000000..0e8c443c723
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
new file mode 100644
index 00000000000..365264298e7
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/mv78xx0.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
new file mode 100644
index 00000000000..1c4954386a8
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 60f4ee4d453..28248d37b99 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <asm/arch/mv78xx0.h>
-#include <asm/plat-orion/irq.h>
+#include <mach/mv78xx0.h>
+#include <plat/irq.h>
 #include "common.h"
 
 void __init mv78xx0_init_irq(void)
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index b78e1443159..430ea84d587 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 struct pcie_port {
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 0a29ef29c73..c69896d011a 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -22,10 +22,9 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/common.h>
+#include <mach/clock.h>
+#include <mach/common.h>
 #include <asm/div64.h>
-#include <asm/mach-types.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d6b5c2e3377..239308fe665 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
index a40a9b950ce..94644cd0a0f 100644
--- a/arch/arm/mach-mx2/crm_regs.h
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -20,7 +20,7 @@
 #ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 #define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /* Register offsets */
 #define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a1f44c3c531..bd0559d5933 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -32,7 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Resource definition for the MXC IrDA
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 07875cf00de..dea6521d4d5 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -20,7 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a9ff01fff13..4ce56ef4d8d 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,16 +23,16 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <asm/arch/common.h>
-#include <asm/hardware.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx1-mx2.h>
-#include <asm/arch/board-mx27ads.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1-mx2.h>
+#include <mach/board-mx27ads.h>
 
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a9a28f58e71..1028f453cfc 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -21,12 +21,12 @@
 #include <linux/mtd/physmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
-#include <asm/arch/common.h>
-#include <asm/hardware.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx1-mx2.h>
 #include <asm/mach/time.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/board-pcm038.h>
+#include <mach/imx-uart.h>
+#include <mach/board-pcm038.h>
 
 /*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 028ac4d3368..a560cd6ad23 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,8 +17,7 @@
  */
 
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 
 /*
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 570c02b8e5d..e31fd44f794 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -20,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 99304645299..7b8269719d1 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2f3635943e7..9f14a871ee7 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 5c0320fce5b..e08c6a8ac56 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -21,8 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index adc51feefc1..3dda1fe23cb 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,9 +21,9 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
 
 /*
  * IOMUX register (base) addresses
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 41dad485ded..30d842bd4d6 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,10 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /*!
  * @file mm.c
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index eba3e0cd428..60fb4e0d5ac 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -23,14 +23,14 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board-mx31ads.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
 
 /*!
  * @file mx31ads.c
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 1372c1a1fc3..d363a6e79f8 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -23,15 +23,15 @@
 #include <linux/kernel.h>
 #include <linux/memory.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <asm/arch/board-mx31lite.h>
+#include <mach/board-mx31lite.h>
 
 /*
  * This file contains the board-specific initialization routines.
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index a34ae6de266..df8582a6231 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -23,15 +23,15 @@
 #include <linux/mtd/physmap.h>
 #include <linux/memory.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx3.h>
-#include <asm/arch/board-pcm037.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-pcm037.h>
 
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
@@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = {
 };
 
 static struct imxuart_platform_data uart_pdata = {
-	.flags = 0,
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index ef0ab6115c0..24c79650f9f 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -23,8 +23,8 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/netx-regs.h>
-#include <asm/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/hardware.h>
 
 struct clk {};
 
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index fd7537f7d11..1b40483ea75 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -22,11 +22,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 #include <asm/io.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
 static struct map_desc netx_io_desc[] __initdata = {
@@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type)
 
 	irq = _irq - NETX_IRQ_HIF_CHAINED(0);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		val |= (1 << 26) << irq;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		val |= (1 << 26) << irq;
 	}
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..11b9d5b4639
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-netx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00100000		@ physical
+		movne	\rx, #io_p2v(0x00100000)	@ virtual
+		orr	\rx, \rx, #0x00000a00
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x18]
+		tst	\rd, #(1 << 3)
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]
+		tst	\rd, #(1 << 3)
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-netx/include/mach/dma.h b/arch/arm/mach-netx/include/mach/dma.h
new file mode 100644
index 00000000000..690b3ebc43a
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-netx/include/mach/dma.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define MAX_DMA_CHANNELS 0
+#define MAX_DMA_ADDRESS ~0
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..a1952a0feda
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-netx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hilscher netX based platforms
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\base, #io_p2v(0x00100000)
+		add	\base, \base, #0x000ff000
+
+		ldr	\irqstat, [\base, #0]
+		clz	\irqnr, \irqstat
+		rsb     \irqnr, \irqnr, #31
+		cmp	\irqstat, #0
+		.endm
+
diff --git a/arch/arm/mach-netx/include/mach/eth.h b/arch/arm/mach-netx/include/mach/eth.h
new file mode 100644
index 00000000000..88af1ac28ea
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/eth.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-netx/include/mach/eth.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef ASMARM_ARCH_ETH_H
+#define ASMARM_ARCH_ETH_H
+
+struct netxeth_platform_data {
+	unsigned int xcno;	/* number of xmac/xpec engine this eth uses */
+};
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h
new file mode 100644
index 00000000000..517a2bd3784
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/hardware.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-netx/include/mach/hardware.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define NETX_IO_PHYS	0x00100000
+#define NETX_IO_VIRT	0xe0000000
+#define NETX_IO_SIZE	0x00100000
+
+#define SRAM_INTERNAL_PHYS_0 0x00000
+#define SRAM_INTERNAL_PHYS_1 0x08000
+#define SRAM_INTERNAL_PHYS_2 0x10000
+#define SRAM_INTERNAL_PHYS_3 0x18000
+#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
+
+#define XPEC_MEM_SIZE 0x4000
+#define XMAC_MEM_SIZE 0x1000
+#define SRAM_MEM_SIZE 0x8000
+
+#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
+#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/io.h b/arch/arm/mach-netx/include/mach/io.h
new file mode 100644
index 00000000000..468b92a8258
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-netx/include/mach/io.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)            (a)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h
new file mode 100644
index 00000000000..6ce914d54a3
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/irqs.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-netx/include/mach/irqs.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define NETX_IRQ_VIC_START   0
+#define NETX_IRQ_SOFTINT     0
+#define NETX_IRQ_TIMER0      1
+#define NETX_IRQ_TIMER1      2
+#define NETX_IRQ_TIMER2      3
+#define NETX_IRQ_SYSTIME_NS  4
+#define NETX_IRQ_SYSTIME_S   5
+#define NETX_IRQ_GPIO_15     6
+#define NETX_IRQ_WATCHDOG    7
+#define NETX_IRQ_UART0       8
+#define NETX_IRQ_UART1       9
+#define NETX_IRQ_UART2      10
+#define NETX_IRQ_USB        11
+#define NETX_IRQ_SPI        12
+#define NETX_IRQ_I2C        13
+#define NETX_IRQ_LCD        14
+#define NETX_IRQ_HIF        15
+#define NETX_IRQ_GPIO_0_14  16
+#define NETX_IRQ_XPEC0      17
+#define NETX_IRQ_XPEC1      18
+#define NETX_IRQ_XPEC2      19
+#define NETX_IRQ_XPEC3      20
+#define NETX_IRQ_XPEC(no)   (17 + (no))
+#define NETX_IRQ_MSYNC0     21
+#define NETX_IRQ_MSYNC1     22
+#define NETX_IRQ_MSYNC2     23
+#define NETX_IRQ_MSYNC3     24
+#define NETX_IRQ_IRQ_PHY    25
+#define NETX_IRQ_ISO_AREA   26
+/* int 27 is reserved */
+/* int 28 is reserved */
+#define NETX_IRQ_TIMER3     29
+#define NETX_IRQ_TIMER4     30
+/* int 31 is reserved */
+
+#define NETX_IRQS 32
+
+/* for multiplexed irqs on gpio 0..14 */
+#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
+#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
+
+/* Host interface interrupts */
+#define NETX_IRQ_HIF_CHAINED(x)    (NETX_IRQ_GPIO_LAST + 1 + (x))
+#define NETX_IRQ_HIF_PIO35         NETX_IRQ_HIF_CHAINED(0)
+#define NETX_IRQ_HIF_PIO36         NETX_IRQ_HIF_CHAINED(1)
+#define NETX_IRQ_HIF_PIO40         NETX_IRQ_HIF_CHAINED(2)
+#define NETX_IRQ_HIF_PIO47         NETX_IRQ_HIF_CHAINED(3)
+#define NETX_IRQ_HIF_PIO72         NETX_IRQ_HIF_CHAINED(4)
+#define NETX_IRQ_HIF_LAST          NETX_IRQ_HIF_CHAINED(4)
+
+#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
new file mode 100644
index 00000000000..53745a1378d
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-netx/include/mach/memory.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)         __virt_to_phys(x)
+#define __bus_to_virt(x)         __phys_to_virt(x)
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
new file mode 100644
index 00000000000..5104a00d40f
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/netx-regs.h
@@ -0,0 +1,410 @@
+/*
+ * arch/arm/mach-netx/include/mach/netx-regs.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_NETX_REGS_H
+#define __ASM_ARCH_NETX_REGS_H
+
+/* offsets relative to the beginning of the io space */
+#define NETX_OFS_SYSTEM  0x00000
+#define NETX_OFS_MEMCR   0x00100
+#define NETX_OFS_DPMAS   0x03000
+#define NETX_OFS_GPIO    0x00800
+#define NETX_OFS_PIO     0x00900
+#define NETX_OFS_UART0   0x00a00
+#define NETX_OFS_UART1   0x00a40
+#define NETX_OFS_UART2   0x00a80
+#define NETX_OF_MIIMU    0x00b00
+#define NETX_OFS_SPI     0x00c00
+#define NETX_OFS_I2C     0x00d00
+#define NETX_OFS_SYSTIME 0x01100
+#define NETX_OFS_RTC     0x01200
+#define NETX_OFS_EXTBUS  0x03600
+#define NETX_OFS_LCD     0x04000
+#define NETX_OFS_USB     0x20000
+#define NETX_OFS_XMAC0   0x60000
+#define NETX_OFS_XMAC1   0x61000
+#define NETX_OFS_XMAC2   0x62000
+#define NETX_OFS_XMAC3   0x63000
+#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
+#define NETX_OFS_PFIFO   0x64000
+#define NETX_OFS_XPEC0   0x70000
+#define NETX_OFS_XPEC1   0x74000
+#define NETX_OFS_XPEC2   0x78000
+#define NETX_OFS_XPEC3   0x7c000
+#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
+#define NETX_OFS_VIC     0xff000
+
+/* physical addresses */
+#define NETX_PA_SYSTEM   (NETX_IO_PHYS + NETX_OFS_SYSTEM)
+#define NETX_PA_MEMCR    (NETX_IO_PHYS + NETX_OFS_MEMCR)
+#define NETX_PA_DPMAS    (NETX_IO_PHYS + NETX_OFS_DPMAS)
+#define NETX_PA_GPIO     (NETX_IO_PHYS + NETX_OFS_GPIO)
+#define NETX_PA_PIO      (NETX_IO_PHYS + NETX_OFS_PIO)
+#define NETX_PA_UART0    (NETX_IO_PHYS + NETX_OFS_UART0)
+#define NETX_PA_UART1    (NETX_IO_PHYS + NETX_OFS_UART1)
+#define NETX_PA_UART2    (NETX_IO_PHYS + NETX_OFS_UART2)
+#define NETX_PA_MIIMU    (NETX_IO_PHYS + NETX_OF_MIIMU)
+#define NETX_PA_SPI      (NETX_IO_PHYS + NETX_OFS_SPI)
+#define NETX_PA_I2C      (NETX_IO_PHYS + NETX_OFS_I2C)
+#define NETX_PA_SYSTIME  (NETX_IO_PHYS + NETX_OFS_SYSTIME)
+#define NETX_PA_RTC      (NETX_IO_PHYS + NETX_OFS_RTC)
+#define NETX_PA_EXTBUS   (NETX_IO_PHYS + NETX_OFS_EXTBUS)
+#define NETX_PA_LCD      (NETX_IO_PHYS + NETX_OFS_LCD)
+#define NETX_PA_USB      (NETX_IO_PHYS + NETX_OFS_USB)
+#define NETX_PA_XMAC0    (NETX_IO_PHYS + NETX_OFS_XMAC0)
+#define NETX_PA_XMAC1    (NETX_IO_PHYS + NETX_OFS_XMAC1)
+#define NETX_PA_XMAC2    (NETX_IO_PHYS + NETX_OFS_XMAC2)
+#define NETX_PA_XMAC3    (NETX_IO_PHYS + NETX_OFS_XMAC3)
+#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
+#define NETX_PA_PFIFO    (NETX_IO_PHYS + NETX_OFS_PFIFO)
+#define NETX_PA_XPEC0    (NETX_IO_PHYS + NETX_OFS_XPEC0)
+#define NETX_PA_XPEC1    (NETX_IO_PHYS + NETX_OFS_XPEC1)
+#define NETX_PA_XPEC2    (NETX_IO_PHYS + NETX_OFS_XPEC2)
+#define NETX_PA_XPEC3    (NETX_IO_PHYS + NETX_OFS_XPEC3)
+#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
+#define NETX_PA_VIC      (NETX_IO_PHYS + NETX_OFS_VIC)
+
+/* virual addresses */
+#define NETX_VA_SYSTEM   (NETX_IO_VIRT + NETX_OFS_SYSTEM)
+#define NETX_VA_MEMCR    (NETX_IO_VIRT + NETX_OFS_MEMCR)
+#define NETX_VA_DPMAS    (NETX_IO_VIRT + NETX_OFS_DPMAS)
+#define NETX_VA_GPIO     (NETX_IO_VIRT + NETX_OFS_GPIO)
+#define NETX_VA_PIO      (NETX_IO_VIRT + NETX_OFS_PIO)
+#define NETX_VA_UART0    (NETX_IO_VIRT + NETX_OFS_UART0)
+#define NETX_VA_UART1    (NETX_IO_VIRT + NETX_OFS_UART1)
+#define NETX_VA_UART2    (NETX_IO_VIRT + NETX_OFS_UART2)
+#define NETX_VA_MIIMU    (NETX_IO_VIRT + NETX_OF_MIIMU)
+#define NETX_VA_SPI      (NETX_IO_VIRT + NETX_OFS_SPI)
+#define NETX_VA_I2C      (NETX_IO_VIRT + NETX_OFS_I2C)
+#define NETX_VA_SYSTIME  (NETX_IO_VIRT + NETX_OFS_SYSTIME)
+#define NETX_VA_RTC      (NETX_IO_VIRT + NETX_OFS_RTC)
+#define NETX_VA_EXTBUS   (NETX_IO_VIRT + NETX_OFS_EXTBUS)
+#define NETX_VA_LCD      (NETX_IO_VIRT + NETX_OFS_LCD)
+#define NETX_VA_USB      (NETX_IO_VIRT + NETX_OFS_USB)
+#define NETX_VA_XMAC0    (NETX_IO_VIRT + NETX_OFS_XMAC0)
+#define NETX_VA_XMAC1    (NETX_IO_VIRT + NETX_OFS_XMAC1)
+#define NETX_VA_XMAC2    (NETX_IO_VIRT + NETX_OFS_XMAC2)
+#define NETX_VA_XMAC3    (NETX_IO_VIRT + NETX_OFS_XMAC3)
+#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
+#define NETX_VA_PFIFO    (NETX_IO_VIRT + NETX_OFS_PFIFO)
+#define NETX_VA_XPEC0    (NETX_IO_VIRT + NETX_OFS_XPEC0)
+#define NETX_VA_XPEC1    (NETX_IO_VIRT + NETX_OFS_XPEC1)
+#define NETX_VA_XPEC2    (NETX_IO_VIRT + NETX_OFS_XPEC2)
+#define NETX_VA_XPEC3    (NETX_IO_VIRT + NETX_OFS_XPEC3)
+#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
+#define NETX_VA_VIC      (NETX_IO_VIRT + NETX_OFS_VIC)
+
+/*********************************
+ * System functions              *
+ *********************************/
+
+/* Registers */
+#define NETX_SYSTEM_REG(ofs)            __io(NETX_VA_SYSTEM + (ofs))
+#define NETX_SYSTEM_BOO_SR          NETX_SYSTEM_REG(0x00)
+#define NETX_SYSTEM_IOC_CR          NETX_SYSTEM_REG(0x04)
+#define NETX_SYSTEM_IOC_MR          NETX_SYSTEM_REG(0x08)
+
+/* FIXME: Docs are not consistent */
+/* #define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x08) */
+#define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x0c)
+
+#define NETX_SYSTEM_PHY_CONTROL     NETX_SYSTEM_REG(0x10)
+#define NETX_SYSTEM_REV             NETX_SYSTEM_REG(0x34)
+#define NETX_SYSTEM_IOC_ACCESS_KEY  NETX_SYSTEM_REG(0x70)
+#define NETX_SYSTEM_WDG_TR          NETX_SYSTEM_REG(0x200)
+#define NETX_SYSTEM_WDG_CTR         NETX_SYSTEM_REG(0x204)
+#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
+#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
+
+/* Bits */
+#define NETX_SYSTEM_RES_CR_RSTIN         (1<<0)
+#define NETX_SYSTEM_RES_CR_WDG_RES       (1<<1)
+#define NETX_SYSTEM_RES_CR_HOST_RES      (1<<2)
+#define NETX_SYSTEM_RES_CR_FIRMW_RES     (1<<3)
+#define NETX_SYSTEM_RES_CR_XPEC0_RES     (1<<4)
+#define NETX_SYSTEM_RES_CR_XPEC1_RES     (1<<5)
+#define NETX_SYSTEM_RES_CR_XPEC2_RES     (1<<6)
+#define NETX_SYSTEM_RES_CR_XPEC3_RES     (1<<7)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG0    (1<<20)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG1    (1<<21)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG2    (1<<22)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG3    (1<<23)
+#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN  (1<<24)
+#define NETX_SYSTEM_RES_CR_RSTOUT        (1<<25)
+#define NETX_SYSTEM_RES_CR_EN_RSTOUT     (1<<26)
+
+#define PHY_CONTROL_RESET            (1<<31)
+#define PHY_CONTROL_SIM_BYP          (1<<30)
+#define PHY_CONTROL_CLK_XLATIN       (1<<29)
+#define PHY_CONTROL_PHY1_EN          (1<<21)
+#define PHY_CONTROL_PHY1_NP_MSG_CODE
+#define PHY_CONTROL_PHY1_AUTOMDIX    (1<<17)
+#define PHY_CONTROL_PHY1_FIXMODE     (1<<16)
+#define PHY_CONTROL_PHY1_MODE(mode)  (((mode) & 0x7) << 13)
+#define PHY_CONTROL_PHY0_EN          (1<<12)
+#define PHY_CONTROL_PHY0_NP_MSG_CODE
+#define PHY_CONTROL_PHY0_AUTOMDIX    (1<<8)
+#define PHY_CONTROL_PHY0_FIXMODE     (1<<7)
+#define PHY_CONTROL_PHY0_MODE(mode)  (((mode) & 0x7) << 4)
+#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
+
+#define PHY_MODE_10BASE_T_HALF      0
+#define PHY_MODE_10BASE_T_FULL      1
+#define PHY_MODE_100BASE_TX_FX_FULL 2
+#define PHY_MODE_100BASE_TX_FX_HALF 3
+#define PHY_MODE_100BASE_TX_HALF    4
+#define PHY_MODE_REPEATER           5
+#define PHY_MODE_POWER_DOWN         6
+#define PHY_MODE_ALL                7
+
+/* Bits */
+#define VECT_CNTL_ENABLE               (1 << 5)
+
+/*******************************
+ * GPIO and timer module       *
+ *******************************/
+
+/* Registers */
+#define NETX_GPIO_REG(ofs)                     __io(NETX_VA_GPIO + (ofs))
+#define NETX_GPIO_CFG(gpio)                NETX_GPIO_REG(0x0  + ((gpio)<<2))
+#define NETX_GPIO_THRESHOLD_CAPTURE(gpio)  NETX_GPIO_REG(0x40 + ((gpio)<<2))
+#define NETX_GPIO_COUNTER_CTRL(counter)    NETX_GPIO_REG(0x80 + ((counter)<<2))
+#define NETX_GPIO_COUNTER_MAX(counter)     NETX_GPIO_REG(0x94 + ((counter)<<2))
+#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
+#define NETX_GPIO_IRQ_ENABLE               NETX_GPIO_REG(0xbc)
+#define NETX_GPIO_IRQ_DISABLE              NETX_GPIO_REG(0xc0)
+#define NETX_GPIO_SYSTIME_NS_CMP           NETX_GPIO_REG(0xc4)
+#define NETX_GPIO_LINE                     NETX_GPIO_REG(0xc8)
+#define NETX_GPIO_IRQ                      NETX_GPIO_REG(0xd0)
+
+/* Bits */
+#define NETX_GPIO_CFG_IOCFG_GP_INPUT                 (0x0)
+#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT                (0x1)
+#define NETX_GPIO_CFG_IOCFG_GP_UART                  (0x2)
+#define NETX_GPIO_CFG_INV                            (1<<2)
+#define NETX_GPIO_CFG_MODE_INPUT_READ                (0<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL  (3<<3)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER0             (0<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER1             (1<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER2             (2<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER3             (3<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER4             (4<<5)
+#define NETX_GPIO_CFG_COUNT_REF_SYSTIME              (7<<5)
+
+#define NETX_GPIO_COUNTER_CTRL_RUN                   (1<<0)
+#define NETX_GPIO_COUNTER_CTRL_SYM                   (1<<1)
+#define NETX_GPIO_COUNTER_CTRL_ONCE                  (1<<2)
+#define NETX_GPIO_COUNTER_CTRL_IRQ_EN                (1<<3)
+#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT             (1<<4)
+#define NETX_GPIO_COUNTER_CTRL_RST_EN                (1<<5)
+#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT             (1<<6)
+#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
+
+#define GPIO_BIT(gpio)                     (1<<(gpio))
+#define COUNTER_BIT(counter)               ((1<<16)<<(counter))
+
+/*******************************
+ * PIO                         *
+ *******************************/
+
+/* Registers */
+#define NETX_PIO_REG(ofs)        __io(NETX_VA_PIO + (ofs))
+#define NETX_PIO_INPIO       NETX_PIO_REG(0x0)
+#define NETX_PIO_OUTPIO      NETX_PIO_REG(0x4)
+#define NETX_PIO_OEPIO       NETX_PIO_REG(0x8)
+
+/*******************************
+ * MII Unit                    *
+ *******************************/
+
+/* Registers */
+#define NETX_MIIMU           __io(NETX_VA_MIIMU)
+
+/* Bits */
+#define MIIMU_SNRDY        (1<<0)
+#define MIIMU_PREAMBLE     (1<<1)
+#define MIIMU_OPMODE_WRITE (1<<2)
+#define MIIMU_MDC_PERIOD   (1<<3)
+#define MIIMU_PHY_NRES     (1<<4)
+#define MIIMU_RTA          (1<<5)
+#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
+#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
+#define MIIMU_DATA(data)   (((data) & 0xffff) << 16)
+
+/*******************************
+ * xmac / xpec                 *
+ *******************************/
+
+/* XPEC register offsets relative to NETX_VA_XPEC(no) */
+#define NETX_XPEC_R0_OFS           0x00
+#define NETX_XPEC_R1_OFS           0x04
+#define NETX_XPEC_R2_OFS           0x08
+#define NETX_XPEC_R3_OFS           0x0c
+#define NETX_XPEC_R4_OFS           0x10
+#define NETX_XPEC_R5_OFS           0x14
+#define NETX_XPEC_R6_OFS           0x18
+#define NETX_XPEC_R7_OFS           0x1c
+#define NETX_XPEC_RANGE01_OFS      0x20
+#define NETX_XPEC_RANGE23_OFS      0x24
+#define NETX_XPEC_RANGE45_OFS      0x28
+#define NETX_XPEC_RANGE67_OFS      0x2c
+#define NETX_XPEC_PC_OFS           0x48
+#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
+#define NETX_XPEC_IRQ_OFS          0x8c
+#define NETX_XPEC_SYSTIME_NS_OFS   0x90
+#define NETX_XPEC_FIFO_DATA_OFS    0x94
+#define NETX_XPEC_SYSTIME_S_OFS    0x98
+#define NETX_XPEC_ADC_OFS          0x9c
+#define NETX_XPEC_URX_COUNT_OFS    0x40
+#define NETX_XPEC_UTX_COUNT_OFS    0x44
+#define NETX_XPEC_PC_OFS           0x48
+#define NETX_XPEC_ZERO_OFS         0x4c
+#define NETX_XPEC_STATCFG_OFS      0x50
+#define NETX_XPEC_EC_MASKA_OFS     0x54
+#define NETX_XPEC_EC_MASKB_OFS     0x58
+#define NETX_XPEC_EC_MASK0_OFS     0x5c
+#define NETX_XPEC_EC_MASK8_OFS     0x7c
+#define NETX_XPEC_EC_MASK9_OFS     0x80
+#define NETX_XPEC_XPU_HOLD_PC_OFS  0x100
+#define NETX_XPEC_RAM_START_OFS    0x2000
+
+/* Bits */
+#define XPU_HOLD_PC (1<<0)
+
+/* XMAC register offsets relative to NETX_VA_XMAC(no) */
+#define NETX_XMAC_RPU_PROGRAM_START_OFS       0x000
+#define NETX_XMAC_RPU_PROGRAM_END_OFS         0x3ff
+#define NETX_XMAC_TPU_PROGRAM_START_OFS       0x400
+#define NETX_XMAC_TPU_PROGRAM_END_OFS         0x7ff
+#define NETX_XMAC_RPU_HOLD_PC_OFS             0xa00
+#define NETX_XMAC_TPU_HOLD_PC_OFS             0xa04
+#define NETX_XMAC_STATUS_SHARED0_OFS          0x840
+#define NETX_XMAC_CONFIG_SHARED0_OFS          0x844
+#define NETX_XMAC_STATUS_SHARED1_OFS          0x848
+#define NETX_XMAC_CONFIG_SHARED1_OFS          0x84c
+#define NETX_XMAC_STATUS_SHARED2_OFS          0x850
+#define NETX_XMAC_CONFIG_SHARED2_OFS          0x854
+#define NETX_XMAC_STATUS_SHARED3_OFS          0x858
+#define NETX_XMAC_CONFIG_SHARED3_OFS          0x85c
+
+#define RPU_HOLD_PC            (1<<15)
+#define TPU_HOLD_PC            (1<<15)
+
+/*******************************
+ * Pointer FIFO                *
+ *******************************/
+
+/* Registers */
+#define NETX_PFIFO_REG(ofs)               __io(NETX_VA_PFIFO + (ofs))
+#define NETX_PFIFO_BASE(pfifo)        NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
+#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
+#define NETX_PFIFO_RESET              NETX_PFIFO_REG(0x100)
+#define NETX_PFIFO_FULL               NETX_PFIFO_REG(0x104)
+#define NETX_PFIFO_EMPTY              NETX_PFIFO_REG(0x108)
+#define NETX_PFIFO_OVEFLOW            NETX_PFIFO_REG(0x10c)
+#define NETX_PFIFO_UNDERRUN           NETX_PFIFO_REG(0x110)
+#define NETX_PFIFO_FILL_LEVEL(pfifo)  NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
+#define NETX_PFIFO_XPEC_ISR(xpec)     NETX_PFIFO_REG(0x400 + ((xpec) << 2))
+
+/*******************************
+ * Dual Port Memory            *
+ *******************************/
+
+/* Registers */
+#define NETX_DPMAS_REG(ofs)               __io(NETX_VA_DPMAS + (ofs))
+#define NETX_DPMAS_SYS_STAT           NETX_DPMAS_REG(0x4d8)
+#define NETX_DPMAS_INT_STAT           NETX_DPMAS_REG(0x4e0)
+#define NETX_DPMAS_INT_EN             NETX_DPMAS_REG(0x4f0)
+#define NETX_DPMAS_IF_CONF0           NETX_DPMAS_REG(0x608)
+#define NETX_DPMAS_IF_CONF1           NETX_DPMAS_REG(0x60c)
+#define NETX_DPMAS_EXT_CONFIG(cs)     NETX_DPMAS_REG(0x610 + 4 * (cs))
+#define NETX_DPMAS_IO_MODE0           NETX_DPMAS_REG(0x620) /* I/O 32..63 */
+#define NETX_DPMAS_DRV_EN0            NETX_DPMAS_REG(0x624)
+#define NETX_DPMAS_DATA0              NETX_DPMAS_REG(0x628)
+#define NETX_DPMAS_IO_MODE1           NETX_DPMAS_REG(0x630) /* I/O 64..84 */
+#define NETX_DPMAS_DRV_EN1            NETX_DPMAS_REG(0x634)
+#define NETX_DPMAS_DATA1              NETX_DPMAS_REG(0x638)
+
+/* Bits */
+#define NETX_DPMAS_INT_EN_GLB_EN         (1<<31)
+#define NETX_DPMAS_INT_EN_MEM_LCK        (1<<30)
+#define NETX_DPMAS_INT_EN_WDG            (1<<29)
+#define NETX_DPMAS_INT_EN_PIO72          (1<<28)
+#define NETX_DPMAS_INT_EN_PIO47          (1<<27)
+#define NETX_DPMAS_INT_EN_PIO40          (1<<26)
+#define NETX_DPMAS_INT_EN_PIO36          (1<<25)
+#define NETX_DPMAS_INT_EN_PIO35          (1<<24)
+
+#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS  (1<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT  (2<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_IO       (4<<28)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP  (1<<14)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD  (2<<14)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
+
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
+
+#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
+#define NETX_EXT_CONFIG_TADRHOLD(x)  (((x) & 0x7) << 26)
+#define NETX_EXT_CONFIG_TCSON(x)     (((x) & 0x7) << 23)
+#define NETX_EXT_CONFIG_TRDON(x)     (((x) & 0x7) << 20)
+#define NETX_EXT_CONFIG_TWRON(x)     (((x) & 0x7)  << 17)
+#define NETX_EXT_CONFIG_TWROFF(x)    (((x) & 0x1f) << 12)
+#define NETX_EXT_CONFIG_TRDWRCYC(x)  (((x) & 0x1f) << 7)
+#define NETX_EXT_CONFIG_WAIT_POL     (1<<6)
+#define NETX_EXT_CONFIG_WAIT_EN      (1<<5)
+#define NETX_EXT_CONFIG_NRD_MODE     (1<<4)
+#define NETX_EXT_CONFIG_DS_MODE      (1<<3)
+#define NETX_EXT_CONFIG_NWR_MODE     (1<<2)
+#define NETX_EXT_CONFIG_16BIT        (1<<1)
+#define NETX_EXT_CONFIG_CS_ENABLE    (1<<0)
+
+#define NETX_DPMAS_IO_MODE0_WRL   (1<<13)
+#define NETX_DPMAS_IO_MODE0_WAIT  (1<<14)
+#define NETX_DPMAS_IO_MODE0_READY (1<<15)
+#define NETX_DPMAS_IO_MODE0_CS0   (1<<19)
+#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
+
+#define NETX_DPMAS_IO_MODE1_CS2           (1<<15)
+#define NETX_DPMAS_IO_MODE1_CS1           (1<<16)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR   (0<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36  (3<<30)
+
+/*******************************
+ * I2C                         *
+ *******************************/
+#define NETX_I2C_REG(ofs)	__io(NETX_VA_I2C, (ofs))
+#define NETX_I2C_CTRL	NETX_I2C_REG(0x0)
+#define NETX_I2C_DATA	NETX_I2C_REG(0x4)
+
+#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/arch/arm/mach-netx/include/mach/param.h b/arch/arm/mach-netx/include/mach/param.h
new file mode 100644
index 00000000000..a771459206a
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/param.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-netx/include/mach/param.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-netx/include/mach/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h
new file mode 100644
index 00000000000..42c59068f8d
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/pfifo.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-netx/include/mach/pfifo.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+#ifndef ASM_ARCH_PFIFO_H
+#define ASM_ARCH_PFIFO_H
+
+static inline int pfifo_push(int no, unsigned int pointer)
+{
+	writel(pointer, NETX_PFIFO_BASE(no));
+	return 0;
+}
+
+static inline unsigned int pfifo_pop(int no)
+{
+	return readl(NETX_PFIFO_BASE(no));
+}
+
+static inline int pfifo_fill_level(int no)
+{
+
+	return readl(NETX_PFIFO_FILL_LEVEL(no));
+}
+
+static inline int pfifo_full(int no)
+{
+	return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
+}
+
+static inline int pfifo_empty(int no)
+{
+	return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
+}
+
+int pfifo_request(unsigned int pfifo_mask);
+void pfifo_free(unsigned int pfifo_mask);
+
+#endif /* ASM_ARCH_PFIFO_H */
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
new file mode 100644
index 00000000000..27d8ef8e8e2
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-netx/include/mach/system.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include "netx-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
+	       NETX_SYSTEM_RES_CR);
+}
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h
new file mode 100644
index 00000000000..1120dd0ba39
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-netx/include/mach/timex.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 100000000
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
new file mode 100644
index 00000000000..84f91284f61
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-netx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+#define REG(x) (*(volatile unsigned long *)(x))
+
+#define UART1_BASE 0x100a00
+#define UART2_BASE 0x100a80
+
+#define UART_DR 0x0
+
+#define UART_CR 0x14
+#define CR_UART_EN (1<<0)
+
+#define UART_FR 0x18
+#define FR_BUSY (1<<3)
+#define FR_TXFF (1<<5)
+
+static void putc(char c)
+{
+	unsigned long base;
+
+	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+		base = UART1_BASE;
+	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+		base = UART2_BASE;
+	else
+		return;
+
+	while (REG(base + UART_FR) & FR_TXFF);
+	REG(base + UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base;
+
+	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+		base = UART1_BASE;
+	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+		base = UART2_BASE;
+	else
+		return;
+
+	while (REG(base + UART_FR) & FR_BUSY);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..25d5cc676e0
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-netx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-netx/include/mach/xc.h b/arch/arm/mach-netx/include/mach/xc.h
new file mode 100644
index 00000000000..0c0011d4fc2
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/xc.h
@@ -0,0 +1,42 @@
+/*
+ *  arch/arm/mach-netx/include/mach/xc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_XC_H
+#define __ASM_ARCH_XC_H
+
+struct xc {
+	int no;
+	unsigned int type;
+	unsigned int version;
+	void __iomem *xpec_base;
+	void __iomem *xmac_base;
+	void __iomem *sram_base;
+	int irq;
+	struct device *dev;
+};
+
+int xc_reset(struct xc *x);
+int xc_stop(struct xc* x);
+int xc_start(struct xc *x);
+int xc_running(struct xc *x);
+int xc_request_firmware(struct xc* x);
+struct xc* request_xc(int xcno, struct device *dev);
+void free_xc(struct xc *x);
+
+#endif /* __ASM_ARCH_XC_H */
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index e4a133d6284..c9b174bc8cc 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 7e26c42d1ac..15b54c62d60 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 53e10a9849f..1061c01ff67 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
index 44dea61a9de..19ae0a72bea 100644
--- a/arch/arm/mach-netx/pfifo.c
+++ b/arch/arm/mach-netx/pfifo.c
@@ -22,9 +22,9 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
 
 static DEFINE_MUTEX(pfifo_lock);
 
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index ea07b54afa5..ac8e5bfed69 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -22,10 +22,10 @@
 #include <linux/irq.h>
 #include <linux/clocksource.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 
 /*
  * IRQ handler for the timer
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index ca9c5b61283..04c34e82fe6 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -23,10 +23,10 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
 
-#include <asm/arch/xc.h>
+#include <mach/xc.h>
 
 static DEFINE_MUTEX(xc_lock);
 
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index a494b71c019..a22a608a7ab 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -13,12 +13,12 @@
 #include <asm/mach/map.h>
 #include <asm/gpio.h>
 
-#include <asm/arch-ns9xxx/board.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
-#include <asm/arch-ns9xxx/regs-mem.h>
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+#include <mach/board.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-bbu.h>
+#include <mach/regs-board-a9m9750dev.h>
 
 #include "board-a9m9750dev.h"
 
diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index f8639161068..44ed20d4a38 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/semaphore.h>
 
-#include <asm/semaphore.h>
 #include "clock.h"
 
 static LIST_HEAD(clocks);
diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c
index cabfb879dda..377330c1b25 100644
--- a/arch/arm/mach-ns9xxx/gpio-ns9360.c
+++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c
@@ -14,8 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/regs-bbu.h>
+#include <mach/processor-ns9360.h>
 
 #include "gpio-ns9360.h"
 
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index b3c963b0c8f..804c3007596 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -13,9 +13,9 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 
-#include <asm/arch-ns9xxx/gpio.h>
-#include <asm/arch-ns9xxx/processor.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/gpio.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
 #include <asm/bug.h>
 #include <asm/types.h>
 #include <asm/bitops.h>
diff --git a/arch/arm/mach-ns9xxx/include/mach/board.h b/arch/arm/mach-ns9xxx/include/mach/board.h
new file mode 100644
index 00000000000..f7e9196eb9a
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/board.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/board.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <asm/mach-types.h>
+
+#define board_is_a9m9750dev()	(0			\
+		|| machine_is_cc9p9360dev()		\
+		|| machine_is_cc9p9750dev()		\
+		)
+
+#define board_is_a9mvali()	(0			\
+		|| machine_is_cc9p9360val() 		\
+		|| machine_is_cc9p9750val()		\
+		)
+
+#define board_is_jscc9p9210()	(0			\
+		|| machine_is_cc9p9210js()		\
+		)
+
+#define board_is_jscc9p9215()	(0			\
+		|| machine_is_cc9p9215js()		\
+		)
+
+#define board_is_jscc9p9360()	(0			\
+		|| machine_is_cc9p9360js()		\
+		)
+
+#define board_is_uncbas()	(0			\
+		|| machine_is_cc7ucamry()		\
+		)
+
+#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
new file mode 100644
index 00000000000..c9530fba00a
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+
+#include <mach/regs-board-a9m9750dev.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
+		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/dma.h b/arch/arm/mach-ns9xxx/include/mach/dma.h
new file mode 100644
index 00000000000..3f50d8c9e5c
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/dma.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/dma.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/entry-macro.S b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
new file mode 100644
index 00000000000..71ca0319b54
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/regs-sys-common.h>
+
+		.macro	get_irqnr_preamble, base, tmp
+		ldr	\base, =SYS_ISRADDR
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
+		cmp	\irqstat, #0
+		ldrne	\irqnr, [\base]
+		.endm
+
+		.macro	disable_fiq
+		.endm
diff --git a/arch/arm/mach-ns9xxx/include/mach/gpio.h b/arch/arm/mach-ns9xxx/include/mach/gpio.h
new file mode 100644
index 00000000000..5eb34903257
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/gpio.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/gpio.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+
+int gpio_request(unsigned gpio, const char *label);
+
+void gpio_free(unsigned gpio);
+
+int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
+
+int gpio_direction_input(unsigned gpio);
+
+int gpio_direction_output(unsigned gpio, int value);
+
+int gpio_get_value(unsigned gpio);
+
+void gpio_set_value(unsigned gpio, int value);
+
+/*
+ * ns9xxx can use gpio pins to trigger an irq, but it's not generic
+ * enough to be supported by the gpio_to_irq/irq_to_gpio interface
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+/* get the cansleep() stubs */
+#include <asm-generic/gpio.h>
+
+#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/hardware.h b/arch/arm/mach-ns9xxx/include/mach/hardware.h
new file mode 100644
index 00000000000..6dbb2030f56
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/hardware.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/memory.h>
+
+/*
+ * NetSilicon NS9xxx internal mapping:
+ *
+ * physical                <--> virtual
+ * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
+ * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
+ */
+#define io_p2v(x)	(0xf0000000 \
+			 + (((x) & 0xf0000000) >> 4) \
+			 + ((x) & 0x00ffffff))
+
+#define io_v2p(x)	((((x) & 0x0f000000) << 4) \
+			 + ((x) & 0x00ffffff))
+
+#define __REGSHIFT(mask)	((mask) & (-(mask)))
+
+#define __REGBIT(bit)		((u32)1 << (bit))
+#define __REGBITS(hbit, lbit)	((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
+#define __REGVAL(mask, value)	(((value) * __REGSHIFT(mask)) & (mask))
+
+#ifndef __ASSEMBLY__
+
+#  define __REG(x)	((void __iomem __force *)io_p2v((x)))
+#  define __REG2(x, y)	((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
+
+#  define __REGSET(var, field, value)					\
+	((var) = (((var) & ~((field) & ~(value))) | (value)))
+
+#  define REGSET(var, reg, field, value)				\
+	__REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
+
+#  define REGSET_IDX(var, reg, field, idx, value)			\
+	__REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
+
+#  define REGSETIM(var, reg, field, value)				\
+	__REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
+
+#  define REGSETIM_IDX(var, reg, field, idx, value)			\
+	__REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
+
+#  define __REGGET(var, field)						\
+	(((var) & (field)))
+
+#  define REGGET(var, reg, field)					\
+	 __REGGET(var, reg ## _ ## field)
+
+#  define REGGET_IDX(var, reg, field, idx)				\
+	 __REGGET(var, reg ## _ ## field((idx)))
+
+#  define REGGETIM(var, reg, field)					\
+	 __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
+
+#  define REGGETIM_IDX(var, reg, field, idx)				\
+	 __REGGET(var, reg ## _ ## field((idx))) /			\
+	 __REGSHIFT(reg ## _ ## field((idx)))
+
+#else
+
+#  define __REG(x)	io_p2v(x)
+#  define __REG2(x, y)	io_p2v((x) + 4 * (y))
+
+#endif
+
+#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/io.h b/arch/arm/mach-ns9xxx/include/mach/io.h
new file mode 100644
index 00000000000..027bf649645
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/io.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT  0xffffffff /* XXX */
+
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)    (a)
+#define __mem_isa(a)    (IO_BASE + (a))
+
+#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/irqs.h b/arch/arm/mach-ns9xxx/include/mach/irqs.h
new file mode 100644
index 00000000000..13483949e21
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/irqs.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* NetSilicon 9360 */
+#define IRQ_NS9XXX_WATCHDOG	0
+#define IRQ_NS9XXX_AHBBUSERR	1
+#define IRQ_NS9360_BBUSAGG	2
+/* irq 3 is reserved for NS9360 */
+#define IRQ_NS9XXX_ETHRX	4
+#define IRQ_NS9XXX_ETHTX	5
+#define IRQ_NS9XXX_ETHPHY	6
+#define IRQ_NS9360_LCD		7
+#define IRQ_NS9360_SERBRX	8
+#define IRQ_NS9360_SERBTX	9
+#define IRQ_NS9360_SERARX	10
+#define IRQ_NS9360_SERATX	11
+#define IRQ_NS9360_SERCRX	12
+#define IRQ_NS9360_SERCTX	13
+#define IRQ_NS9360_I2C		14
+#define IRQ_NS9360_BBUSDMA	15
+#define IRQ_NS9360_TIMER0	16
+#define IRQ_NS9360_TIMER1	17
+#define IRQ_NS9360_TIMER2	18
+#define IRQ_NS9360_TIMER3	19
+#define IRQ_NS9360_TIMER4	20
+#define IRQ_NS9360_TIMER5	21
+#define IRQ_NS9360_TIMER6	22
+#define IRQ_NS9360_TIMER7	23
+#define IRQ_NS9360_RTC		24
+#define IRQ_NS9360_USBHOST	25
+#define IRQ_NS9360_USBDEVICE	26
+#define IRQ_NS9360_IEEE1284	27
+#define IRQ_NS9XXX_EXT0		28
+#define IRQ_NS9XXX_EXT1		29
+#define IRQ_NS9XXX_EXT2		30
+#define IRQ_NS9XXX_EXT3		31
+
+#define BBUS_IRQ(irq)	(32 + irq)
+
+#define IRQ_BBUS_DMA		BBUS_IRQ(0)
+#define IRQ_BBUS_SERBRX		BBUS_IRQ(2)
+#define IRQ_BBUS_SERBTX		BBUS_IRQ(3)
+#define IRQ_BBUS_SERARX		BBUS_IRQ(4)
+#define IRQ_BBUS_SERATX		BBUS_IRQ(5)
+#define IRQ_BBUS_SERCRX		BBUS_IRQ(6)
+#define IRQ_BBUS_SERCTX		BBUS_IRQ(7)
+#define IRQ_BBUS_SERDRX		BBUS_IRQ(8)
+#define IRQ_BBUS_SERDTX		BBUS_IRQ(9)
+#define IRQ_BBUS_I2C		BBUS_IRQ(10)
+#define IRQ_BBUS_1284		BBUS_IRQ(11)
+#define IRQ_BBUS_UTIL		BBUS_IRQ(12)
+#define IRQ_BBUS_RTC		BBUS_IRQ(13)
+#define IRQ_BBUS_USBHST		BBUS_IRQ(14)
+#define IRQ_BBUS_USBDEV		BBUS_IRQ(15)
+#define IRQ_BBUS_AHBDMA1	BBUS_IRQ(24)
+#define IRQ_BBUS_AHBDMA2	BBUS_IRQ(25)
+
+/*
+ * these Interrupts are specific for the a9m9750dev board.
+ * They are generated by an FPGA that interrupts the CPU on
+ * IRQ_NS9360_EXT2
+ */
+#define FPGA_IRQ(irq)	(64 + irq)
+
+#define IRQ_FPGA_UARTA		FPGA_IRQ(0)
+#define IRQ_FPGA_UARTB		FPGA_IRQ(1)
+#define IRQ_FPGA_UARTC		FPGA_IRQ(2)
+#define IRQ_FPGA_UARTD		FPGA_IRQ(3)
+#define IRQ_FPGA_TOUCH		FPGA_IRQ(4)
+#define IRQ_FPGA_CF		FPGA_IRQ(5)
+#define IRQ_FPGA_CAN0		FPGA_IRQ(6)
+#define IRQ_FPGA_CAN1		FPGA_IRQ(7)
+
+#define NR_IRQS	72
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h
new file mode 100644
index 00000000000..649ee6235b9
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/memory.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* x in [0..3] */
+#define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
+
+#define NS9XXX_CS0STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS1STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS2STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS3STAT_LENGTH	UL(0x1000)
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ns9xxx/include/mach/module.h b/arch/arm/mach-ns9xxx/include/mach/module.h
new file mode 100644
index 00000000000..f851a6b7da6
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/module.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/module.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_MODULE_H
+#define __ASM_ARCH_MODULE_H
+
+#include <asm/mach-types.h>
+
+#define module_is_cc7ucamry()	(0			\
+		|| machine_is_cc7ucamry()		\
+		)
+
+#define module_is_cc9c()	(0			\
+		|| machine_is_cc9c()			\
+		)
+
+#define module_is_cc9p9210()	(0			\
+		|| machine_is_cc9p9210()		\
+		|| machine_is_cc9p9210js()		\
+		)
+
+#define module_is_cc9p9215()	(0			\
+		|| machine_is_cc9p9215()		\
+		|| machine_is_cc9p9215js()		\
+		)
+
+#define module_is_cc9p9360()	(0			\
+		|| machine_is_a9m9360()			\
+		|| machine_is_cc9p9360dev()		\
+		|| machine_is_cc9p9360js()		\
+		|| machine_is_cc9p9360val()		\
+		)
+
+#define module_is_cc9p9750()	(0			\
+		|| machine_is_a9m9750()			\
+		|| machine_is_cc9p9750dev()		\
+		|| machine_is_cc9p9750js()		\
+		|| machine_is_cc9p9750val()		\
+		)
+
+#define module_is_ccw9c()	(0			\
+		|| machine_is_ccw9c()			\
+		)
+
+#define module_is_inc20otter()	(0			\
+		|| machine_is_inc20otter()		\
+		)
+
+#define module_is_otter()	(0			\
+		|| machine_is_otter()			\
+		)
+
+#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
new file mode 100644
index 00000000000..f41deda5129
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSORNS9360_H
+#define __ASM_ARCH_PROCESSORNS9360_H
+
+#include <linux/init.h>
+
+void ns9360_reset(char mode);
+
+unsigned long ns9360_systemclock(void) __attribute__((const));
+
+static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
+static inline unsigned long ns9360_cpuclock(void)
+{
+	return ns9360_systemclock() / 2;
+}
+
+void __init ns9360_map_io(void);
+
+extern struct sys_timer ns9360_timer;
+
+int ns9360_gpio_configure(unsigned gpio, int inv, int func);
+
+#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor.h b/arch/arm/mach-ns9xxx/include/mach/processor.h
new file mode 100644
index 00000000000..9f77f746a38
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSOR_H
+#define __ASM_ARCH_PROCESSOR_H
+
+#include <mach/module.h>
+
+#define processor_is_ns9210()	(0			\
+		|| module_is_cc7ucamry()		\
+		|| module_is_cc9p9210()			\
+		|| module_is_inc20otter()		\
+		|| module_is_otter()			\
+		)
+
+#define processor_is_ns9215()	(0			\
+		|| module_is_cc9p9215()			\
+		)
+
+#define processor_is_ns9360()	(0			\
+		|| module_is_cc9p9360()			\
+		|| module_is_cc9c()			\
+		|| module_is_ccw9c()			\
+		)
+
+#define processor_is_ns9750()	(0			\
+		|| module_is_cc9p9750()			\
+		)
+
+#define processor_is_ns921x()	(0			\
+		|| processor_is_ns9210()		\
+		|| processor_is_ns9215()		\
+		)
+
+#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
new file mode 100644
index 00000000000..af227c058fb
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBBU_H
+#define __ASM_ARCH_REGSBBU_H
+
+#include <mach/hardware.h>
+
+/* BBus Utility */
+
+/* GPIO Configuration Registers block 1 */
+/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
+ * at 0 for each block.  That is, BBU_GCONFb1(0) is GPIO Configuration Register
+ * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
+#define BBU_GCONFb1(x)	__REG2(0x90600010, (x))
+#define BBU_GCONFb2(x)	__REG2(0x90600100, (x))
+
+#define BBU_GCONFx_DIR(m)	__REGBIT(3 + (((m) & 7) << 2))
+#define BBU_GCONFx_DIR_INPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 0)
+#define BBU_GCONFx_DIR_OUTPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 1)
+#define BBU_GCONFx_INV(m)	__REGBIT(2 + (((m) & 7) << 2))
+#define BBU_GCONFx_INV_NO(m)		__REGVAL(BBU_GCONFx_INV(m), 0)
+#define BBU_GCONFx_INV_YES(m)		__REGVAL(BBU_GCONFx_INV(m), 1)
+#define BBU_GCONFx_FUNC(m)	__REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
+#define BBU_GCONFx_FUNC_0(m)		__REGVAL(BBU_GCONFx_FUNC(m), 0)
+#define BBU_GCONFx_FUNC_1(m)		__REGVAL(BBU_GCONFx_FUNC(m), 1)
+#define BBU_GCONFx_FUNC_2(m)		__REGVAL(BBU_GCONFx_FUNC(m), 2)
+#define BBU_GCONFx_FUNC_3(m)		__REGVAL(BBU_GCONFx_FUNC(m), 3)
+
+#define BBU_GCTRL1	__REG(0x90600030)
+#define BBU_GCTRL2	__REG(0x90600034)
+#define BBU_GCTRL3	__REG(0x90600120)
+
+#define BBU_GSTAT1	__REG(0x90600040)
+#define BBU_GSTAT2	__REG(0x90600044)
+#define BBU_GSTAT3	__REG(0x90600130)
+
+#endif /* ifndef __ASM_ARCH_REGSBBU_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
new file mode 100644
index 00000000000..cd1593693f5
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
+#define __ASM_ARCH_REGSBOARDA9M9750_H
+
+#include <mach/hardware.h>
+
+#define FPGA_UARTA_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+#define FPGA_UARTB_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
+#define FPGA_UARTC_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
+#define FPGA_UARTD_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
+
+#define FPGA_IER	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
+#define FPGA_ISR	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
+
+#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-mem.h b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
new file mode 100644
index 00000000000..f1625bf8cdc
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
@@ -0,0 +1,135 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSMEM_H
+#define __ASM_ARCH_REGSMEM_H
+
+#include <mach/hardware.h>
+
+/* Memory Module */
+
+/* Control register */
+#define MEM_CTRL	__REG(0xa0700000)
+
+/* Status register */
+#define MEM_STAT	__REG(0xa0700004)
+
+/* Configuration register */
+#define MEM_CONF	__REG(0xa0700008)
+
+/* Dynamic Memory Control register */
+#define MEM_DMCTRL	__REG(0xa0700020)
+
+/* Dynamic Memory Refresh Timer */
+#define MEM_DMRT	__REG(0xa0700024)
+
+/* Dynamic Memory Read Configuration register */
+#define MEM_DMRC	__REG(0xa0700028)
+
+/* Dynamic Memory Precharge Command Period (tRP) */
+#define MEM_DMPCP	__REG(0xa0700030)
+
+/* Dynamic Memory Active to Precharge Command Period (tRAS) */
+#define MEM_DMAPCP	__REG(0xa0700034)
+
+/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
+#define MEM_DMSRET	__REG(0xa0700038)
+
+/* Dynamic Memory Last Data Out to Active Time (tAPR) */
+#define MEM_DMLDOAT	__REG(0xa070003c)
+
+/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
+#define MEM_DMDIACT	__REG(0xa0700040)
+
+/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
+#define MEM_DMWRT	__REG(0xa0700044)
+
+/* Dynamic Memory Active to Active Command Period (tRC) */
+#define MEM_DMAACP	__REG(0xa0700048)
+
+/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
+#define MEM_DMARP	__REG(0xa070004c)
+
+/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
+#define MEM_DMESRAC	__REG(0xa0700050)
+
+/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
+#define MEM_DMABAABT	__REG(0xa0700054)
+
+/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
+#define MEM_DMLMACT	__REG(0xa0700058)
+
+/* Static Memory Extended Wait */
+#define MEM_SMEW	__REG(0xa0700080)
+
+/* Dynamic Memory Configuration Register x */
+#define MEM_DMCONF(x) 	__REG2(0xa0700100, (x) << 3)
+
+/* Dynamic Memory RAS and CAS Delay x */
+#define MEM_DMRCD(x)	__REG2(0xa0700104, (x) << 3)
+
+/* Static Memory Configuration Register x */
+#define MEM_SMC(x)	__REG2(0xa0700200, (x) << 3)
+
+/* Static Memory Configuration Register x: Write protect */
+#define MEM_SMC_PSMC		__REGBIT(20)
+#define MEM_SMC_PSMC_OFF		__REGVAL(MEM_SMC_PSMC, 0)
+#define MEM_SMC_PSMC_ON			__REGVAL(MEM_SMC_PSMC, 1)
+
+/* Static Memory Configuration Register x: Buffer enable */
+#define MEM_SMC_BSMC		__REGBIT(19)
+#define MEM_SMC_BSMC_OFF		__REGVAL(MEM_SMC_BSMC, 0)
+#define MEM_SMC_BSMC_ON			__REGVAL(MEM_SMC_BSMC, 1)
+
+/* Static Memory Configuration Register x: Extended Wait */
+#define MEM_SMC_EW		__REGBIT(8)
+#define MEM_SMC_EW_OFF			__REGVAL(MEM_SMC_EW, 0)
+#define MEM_SMC_EW_ON			__REGVAL(MEM_SMC_EW, 1)
+
+/* Static Memory Configuration Register x: Byte lane state */
+#define MEM_SMC_PB		__REGBIT(7)
+#define MEM_SMC_PB_0			__REGVAL(MEM_SMC_PB, 0)
+#define MEM_SMC_PB_1			__REGVAL(MEM_SMC_PB, 1)
+
+/* Static Memory Configuration Register x: Chip select polarity */
+#define MEM_SMC_PC		__REGBIT(6)
+#define MEM_SMC_PC_AL			__REGVAL(MEM_SMC_PC, 0)
+#define MEM_SMC_PC_AH			__REGVAL(MEM_SMC_PC, 1)
+
+/* static memory configuration register x: page mode*/
+#define MEM_SMC_PM		__REGBIT(3)
+#define MEM_SMC_PM_DIS			__REGVAL(MEM_SMC_PM, 0)
+#define MEM_SMC_PM_ASYNC		__REGVAL(MEM_SMC_PM, 1)
+
+/* static memory configuration register x: Memory width */
+#define MEM_SMC_MW		__REGBITS(1, 0)
+#define MEM_SMC_MW_8			__REGVAL(MEM_SMC_MW, 0)
+#define MEM_SMC_MW_16			__REGVAL(MEM_SMC_MW, 1)
+#define MEM_SMC_MW_32			__REGVAL(MEM_SMC_MW, 2)
+
+/* Static Memory Write Enable Delay x */
+#define MEM_SMWED(x)	__REG2(0xa0700204, (x) << 3)
+
+/* Static Memory Output Enable Delay x */
+#define MEM_SMOED(x)	__REG2(0xa0700208, (x) << 3)
+
+/* Static Memory Read Delay x */
+#define MEM_SMRD(x)	__REG2(0xa070020c, (x) << 3)
+
+/* Static Memory Page Mode Read Delay 0 */
+#define MEM_SMPMRD(x)	__REG2(0xa0700210, (x) << 3)
+
+/* Static Memory Write Delay */
+#define MEM_SMWD(x)	__REG2(0xa0700214, (x) << 3)
+
+/* Static Memory Turn Round Delay x */
+#define MEM_SWT(x)	__REG2(0xa0700218, (x) << 3)
+
+#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
new file mode 100644
index 00000000000..14f91dfd573
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGSSYSCOMMON_H
+#define __ASM_ARCH_REGSSYSCOMMON_H
+#include <mach/hardware.h>
+
+/* Interrupt Vector Address Register Level x */
+#define SYS_IVA(x)	__REG2(0xa09000c4, (x))
+
+/* Interrupt Configuration registers */
+#define SYS_IC(x)	__REG2(0xa0900144, (x))
+
+/* ISRADDR */
+#define SYS_ISRADDR     __REG(0xa0900164)
+
+/* Interrupt Status Active */
+#define SYS_ISA		__REG(0xa0900168)
+
+/* Interrupt Status Raw */
+#define SYS_ISR		__REG(0xa090016c)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
new file mode 100644
index 00000000000..8ff254d9901
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSSYSNS9360_H
+#define __ASM_ARCH_REGSSYSNS9360_H
+
+#include <mach/hardware.h>
+
+/* System Control Module */
+
+/* AHB Arbiter Gen Configuration */
+#define SYS_AHBAGENCONF	__REG(0xa0900000)
+
+/* BRC */
+#define SYS_BRC(x)	__REG2(0xa0900004, (x))
+
+/* Timer x Reload Count register */
+#define SYS_TRC(x)	__REG2(0xa0900044, (x))
+
+/* Timer x Read register */
+#define SYS_TR(x)	__REG2(0xa0900084, (x))
+
+/* Timer Interrupt Status register */
+#define SYS_TIS		__REG(0xa0900170)
+
+/* PLL Configuration register */
+#define SYS_PLL		__REG(0xa0900188)
+
+/* PLL FS status */
+#define SYS_PLL_FS		__REGBITS(24, 23)
+
+/* PLL ND status */
+#define SYS_PLL_ND		__REGBITS(20, 16)
+
+/* PLL Configuration register: PLL SW change */
+#define SYS_PLL_SWC		__REGBIT(15)
+#define SYS_PLL_SWC_NO			__REGVAL(SYS_PLL_SWC, 0)
+#define SYS_PLL_SWC_YES			__REGVAL(SYS_PLL_SWC, 1)
+
+/* Timer x Control register */
+#define SYS_TC(x)	__REG2(0xa0900190, (x))
+
+/* Timer x Control register: Timer enable */
+#define SYS_TCx_TEN		__REGBIT(15)
+#define SYS_TCx_TEN_DIS			__REGVAL(SYS_TCx_TEN, 0)
+#define SYS_TCx_TEN_EN			__REGVAL(SYS_TCx_TEN, 1)
+
+/* Timer x Control register: CPU debug mode */
+#define SYS_TCx_TDBG		__REGBIT(10)
+#define SYS_TCx_TDBG_CONT		__REGVAL(SYS_TCx_TDBG, 0)
+#define SYS_TCx_TDBG_STOP		__REGVAL(SYS_TCx_TDBG, 1)
+
+/* Timer x Control register: Interrupt clear */
+#define SYS_TCx_INTC		__REGBIT(9)
+#define SYS_TCx_INTC_UNSET		__REGVAL(SYS_TCx_INTC, 0)
+#define SYS_TCx_INTC_SET		__REGVAL(SYS_TCx_INTC, 1)
+
+/* Timer x Control register: Timer clock select */
+#define SYS_TCx_TLCS		__REGBITS(8, 6)
+#define SYS_TCx_TLCS_CPU		__REGVAL(SYS_TCx_TLCS, 0)	/* CPU clock */
+#define SYS_TCx_TLCS_DIV2		__REGVAL(SYS_TCx_TLCS, 1)	/* CPU clock / 2 */
+#define SYS_TCx_TLCS_DIV4		__REGVAL(SYS_TCx_TLCS, 2)	/* CPU clock / 4 */
+#define SYS_TCx_TLCS_DIV8		__REGVAL(SYS_TCx_TLCS, 3)	/* CPU clock / 8 */
+#define SYS_TCx_TLCS_DIV16		__REGVAL(SYS_TCx_TLCS, 4)	/* CPU clock / 16 */
+#define SYS_TCx_TLCS_DIV32		__REGVAL(SYS_TCx_TLCS, 5)	/* CPU clock / 32 */
+#define SYS_TCx_TLCS_DIV64		__REGVAL(SYS_TCx_TLCS, 6)	/* CPU clock / 64 */
+#define SYS_TCx_TLCS_EXT		__REGVAL(SYS_TCx_TLCS, 7)
+
+/* Timer x Control register: Timer mode */
+#define SYS_TCx_TM		__REGBITS(5, 4)
+#define SYS_TCx_TM_IEE			__REGVAL(SYS_TCx_TM, 0)		/* Internal timer or external event */
+#define SYS_TCx_TM_ELL			__REGVAL(SYS_TCx_TM, 1)		/* External low-level, gated timer */
+#define SYS_TCx_TM_EHL			__REGVAL(SYS_TCx_TM, 2)		/* External high-level, gated timer */
+#define SYS_TCx_TM_CONCAT		__REGVAL(SYS_TCx_TM, 3)		/* Concatenate the lower timer. */
+
+/* Timer x Control register: Interrupt select */
+#define SYS_TCx_INTS		__REGBIT(3)
+#define SYS_TCx_INTS_DIS		__REGVAL(SYS_TCx_INTS, 0)
+#define SYS_TCx_INTS_EN			__REGVAL(SYS_TCx_INTS, 1)
+
+/* Timer x Control register: Up/down select */
+#define SYS_TCx_UDS		__REGBIT(2)
+#define SYS_TCx_UDS_UP			__REGVAL(SYS_TCx_UDS, 0)
+#define SYS_TCx_UDS_DOWN		__REGVAL(SYS_TCx_UDS, 1)
+
+/* Timer x Control register: 32- or 16-bit timer */
+#define SYS_TCx_TSZ		__REGBIT(1)
+#define SYS_TCx_TSZ_16			__REGVAL(SYS_TCx_TSZ, 0)
+#define SYS_TCx_TSZ_32			__REGVAL(SYS_TCx_TSZ, 1)
+
+/* Timer x Control register: Reload enable */
+#define SYS_TCx_REN		__REGBIT(0)
+#define SYS_TCx_REN_DIS			__REGVAL(SYS_TCx_REN, 0)
+#define SYS_TCx_REN_EN			__REGVAL(SYS_TCx_REN, 1)
+
+/* System Memory Chip Select x Dynamic Memory Base */
+#define SYS_SMCSDMB(x)	__REG2(0xa09001d0, (x) << 1)
+
+/* System Memory Chip Select x Dynamic Memory Mask */
+#define SYS_SMCSDMM(x)	__REG2(0xa09001d4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base */
+#define SYS_SMCSSMB(x)	__REG2(0xa09001f0, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base: Chip select x base */
+#define SYS_SMCSSMB_CSxB	__REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask */
+#define SYS_SMCSSMM(x)	__REG2(0xa09001f4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
+#define SYS_SMCSSMM_CSxM	__REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
+#define SYS_SMCSSMM_CSEx	__REGBIT(0)
+#define SYS_SMCSSMM_CSEx_DIS		__REGVAL(SYS_SMCSSMM_CSEx, 0)
+#define SYS_SMCSSMM_CSEx_EN		__REGVAL(SYS_SMCSSMM_CSEx, 1)
+
+/* General purpose, user-defined ID register */
+#define SYS_GENID	__REG(0xa0900210)
+
+/* External Interrupt x Control register */
+#define SYS_EIC(x)	__REG2(0xa0900214, (x))
+
+/* External Interrupt x Control register: Status */
+#define SYS_EIC_STS		__REGBIT(3)
+
+/* External Interrupt x Control register: Clear */
+#define SYS_EIC_CLR		__REGBIT(2)
+
+/* External Interrupt x Control register: Polarity */
+#define SYS_EIC_PLTY		__REGBIT(1)
+#define SYS_EIC_PLTY_AH			__REGVAL(SYS_EIC_PLTY, 0)
+#define SYS_EIC_PLTY_AL			__REGVAL(SYS_EIC_PLTY, 1)
+
+/* External Interrupt x Control register: Level edge */
+#define SYS_EIC_LVEDG		__REGBIT(0)
+#define SYS_EIC_LVEDG_LEVEL		__REGVAL(SYS_EIC_LVEDG, 0)
+#define SYS_EIC_LVEDG_EDGE		__REGVAL(SYS_EIC_LVEDG, 1)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
new file mode 100644
index 00000000000..e2068c57415
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/system.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+#ifdef CONFIG_PROCESSOR_NS9360
+	if (processor_is_ns9360())
+		ns9360_reset(mode);
+	else
+#endif
+		BUG();
+
+	BUG();
+}
+
+#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/timex.h b/arch/arm/mach-ns9xxx/include/mach/timex.h
new file mode 100644
index 00000000000..734a8d8bd57
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/timex.h
+ *
+ * Copyright (C) 2005-2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h.
+ * See there for an explanation.
+ */
+#define CLOCK_TICK_RATE         12000000
+
+#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
new file mode 100644
index 00000000000..5dbc3c5167c
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+
+#define __REG(x)	((void __iomem __force *)(x))
+
+static void putc_dummy(char c, void __iomem *base)
+{
+	/* nothing */
+}
+
+static void putc_ns9360(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (__raw_readl(base + 8) & (1 << 3)) {
+			__raw_writeb(c, base + 16);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+}
+
+static void putc_a9m9750dev(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (__raw_readb(base + 5) & (1 << 5)) {
+			__raw_writeb(c, base);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+
+}
+
+static void putc_ns921x(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (!(__raw_readl(base) & (1 << 11))) {
+			__raw_writeb(c, base + 0x0028);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+}
+
+#define MSCS __REG(0xA0900184)
+
+#define NS9360_UARTA	__REG(0x90200040)
+#define NS9360_UARTB	__REG(0x90200000)
+#define NS9360_UARTC	__REG(0x90300000)
+#define NS9360_UARTD	__REG(0x90300040)
+
+#define NS9360_UART_ENABLED(base)					\
+		(__raw_readl(NS9360_UARTA) & (1 << 31))
+
+#define A9M9750DEV_UARTA	__REG(0x40000000)
+
+#define NS921XSYS_CLOCK	__REG(0xa090017c)
+#define NS921X_UARTA	__REG(0x90010000)
+#define NS921X_UARTB	__REG(0x90018000)
+#define NS921X_UARTC	__REG(0x90020000)
+#define NS921X_UARTD	__REG(0x90028000)
+
+#define NS921X_UART_ENABLED(base)					\
+		(__raw_readl((base) + 0x1000) & (1 << 29))
+
+static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
+{
+	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
+		/* ns9360 or ns9750 */
+		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTA;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTB;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTC;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTD;
+			return;
+		} else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
+			*putc = putc_a9m9750dev;
+			*base = A9M9750DEV_UARTA;
+			return;
+		}
+	} else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
+		/* ns921x */
+		u32 clock = __raw_readl(NS921XSYS_CLOCK);
+
+		if ((clock & (1 << 1)) &&
+				NS921X_UART_ENABLED(NS921X_UARTA)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTA;
+			return;
+		} else if ((clock & (1 << 2)) &&
+				NS921X_UART_ENABLED(NS921X_UARTB)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTB;
+			return;
+		} else if ((clock & (1 << 3)) &&
+				NS921X_UART_ENABLED(NS921X_UARTC)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTC;
+			return;
+		} else if ((clock & (1 << 4)) &&
+				NS921X_UART_ENABLED(NS921X_UARTD)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTD;
+			return;
+		}
+	}
+
+	*putc = putc_dummy;
+}
+
+void (*myputc)(char, void __iomem *);
+void __iomem *base;
+
+static void putc(char c)
+{
+	myputc(c, base);
+}
+
+static void arch_decomp_setup(void)
+{
+	autodetect(&myputc, &base);
+}
+#define arch_decomp_wdog()
+
+static void flush(void)
+{
+	/* nothing */
+}
+
+#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
new file mode 100644
index 00000000000..fe964d3bcc4
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END     (0xf0000000)
+
+#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index ca85d24cf39..38260d5f849 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -12,10 +12,9 @@
 #include <linux/kernel_stat.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-#include <asm/arch-ns9xxx/regs-sys-common.h>
-#include <asm/arch-ns9xxx/irqs.h>
-#include <asm/arch-ns9xxx/board.h>
+#include <mach/regs-sys-common.h>
+#include <mach/irqs.h>
+#include <mach/board.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
index 9623fff6b3b..2858417d8d8 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-a9m9750dev.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
index fcc815bdd29..729f68da429 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-jscc9p9360.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
index 5aa5d9baf8c..795b15e8982 100644
--- a/arch/arm/mach-ns9xxx/plat-serial8250.c
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
-#include <asm/arch-ns9xxx/board.h>
+#include <mach/regs-board-a9m9750dev.h>
+#include <mach/board.h>
 
 #define DRIVER_NAME "serial8250"
 
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
index 2bee0b7fccb..abee8338735 100644
--- a/arch/arm/mach-ns9xxx/processor-ns9360.c
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -14,8 +14,8 @@
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
 
 void ns9360_reset(char mode)
 {
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 4d573c9793e..a63424d083d 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -15,10 +15,10 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
-#include <asm/arch-ns9xxx/irqs.h>
-#include <asm/arch/system.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/irqs.h>
+#include <mach/system.h>
 #include "generic.h"
 
 #define TIMER_CLOCKSOURCE 0
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8b102ad59c1..2e618391cc5 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -17,18 +17,18 @@
 #include <linux/input.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board-ams-delta.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 1bdb66638e2..db789461fca 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -20,21 +20,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/board-fsample.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/board-fsample.h>
 
 static int fsample_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c711bf23f7b..7d267020537 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -17,16 +17,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 6fdc78406b2..ab9ee5820c4 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 4b444fdaafe..3b65914b914 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -29,7 +29,7 @@
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -37,16 +37,16 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio-switch.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio-switch.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 66ecc437928..36085819098 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7fbaa8d648c..2ced6d9984d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -31,7 +31,7 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -39,18 +39,18 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpioexpander.h>
+#include <mach/irqs.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO	48
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 4b8ae3ee0d0..cbc11be5cd2 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -24,21 +24,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 3f39e0e79c9..38d9783ac6d 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -20,21 +20,21 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/dsp_common.h>
-#include <asm/arch/aic23.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/lcd_mipid.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/dsp_common.h>
+#include <mach/aic23.h>
+#include <mach/omapfb.h>
+#include <mach/lcd_mipid.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 845c66371ca..3e766e49f7c 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,7 +39,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -47,12 +47,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/usb.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/usb.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
 		return;
 	}
 	/* the CF I/O IRQ is really active-low */
-	set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -340,7 +340,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <asm/arch/keypad.h>
+#include <mach/keypad.h>
 
 static const int osk_keymap[] = {
 	/* KEY(col, row, code) */
@@ -483,7 +483,7 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	gpio_request(4, "ts_int");
 	gpio_direction_input(4);
-	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
 
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
@@ -494,7 +494,7 @@ static void __init osk_mistral_init(void)
 		int ret = 0;
 
 		gpio_direction_input(OMAP_MPUIO(2));
-		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
+		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index a4d20127a60..b58043644a6 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -27,23 +27,23 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 2a033689f9f..40f9860a09d 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -23,24 +23,24 @@
 #include <linux/mtd/partitions.h>
 #include <linux/leds.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/led.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/led.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e020c277460..e719294250b 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -26,23 +26,23 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id)
 	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
 		printk(KERN_INFO "PM: Power cable connected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_FALLING);
+				IRQ_TYPE_EDGE_FALLING);
 	} else {
 		printk(KERN_INFO "PM: Power cable disconnected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_RISING);
+				IRQ_TYPE_EDGE_RISING);
 	}
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 94bc0745ab2..b715917bfda 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -20,20 +20,20 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 8c93d47719e..0be4ebaa284 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,9 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index e473fa6d4a5..130bcc6fd08 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,22 +26,22 @@
 #include <linux/i2c.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
-#include <asm/arch/keypad.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
+#include <mach/keypad.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 5c00b3f39cd..213b4878710 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,17 +22,17 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
@@ -186,10 +186,10 @@ static void __init voiceblue_init(void)
 	omap_request_gpio(13);
 	omap_request_gpio(14);
 	omap_request_gpio(15);
-	set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
 
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4ea2933f887..5965cf09f8c 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -21,10 +21,10 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/cpu.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index da8a3ac47e1..ab708d4c597 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,15 +14,14 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0cf62ef5ecb..4449d86095f 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -22,13 +22,13 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)
 {
@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
 	 */
 	omap_request_gpio(13);
 	omap_set_gpio_direction(13, 1);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 81c4e738506..2b9750b200c 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,8 +15,8 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
 extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 1da9d59a034..0ec6c1ec425 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,11 +41,11 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 8976fbb21f7..610f51f1874 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -14,13 +14,13 @@
 #include <linux/sched.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index e7835d6f53a..9b99c289462 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -3,7 +3,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 754383dde80..98e789622df 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -5,11 +5,11 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 3f9dcac4fd4..6cdad93c4a0 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -9,8 +9,8 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index bad1e7152d8..af44eab1ed2 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -13,8 +13,8 @@
 #include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_ARM2DSP1		0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 2d2c2522b04..2baeaeb0c90 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,11 +17,11 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/dsp_common.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
@@ -159,6 +159,7 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP730
 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP730_MCBSP1_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -167,6 +168,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP730_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -184,6 +186,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP1510_MCBSP1_BASE,
 		.virt_base	= OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -193,6 +196,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 		},
 	{
+		.phys_base	= OMAP1510_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1510_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -201,6 +205,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP1510_MCBSP3_BASE,
 		.virt_base	= OMAP1510_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -219,6 +224,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP1610_MCBSP1_BASE,
 		.virt_base	= OMAP1610_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -228,6 +234,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP1610_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1610_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -236,6 +243,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP1610_MCBSP3_BASE,
 		.virt_base	= OMAP1610_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e207bf7cb85..898516e362e 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 742f79e73bd..63c4ea18b1c 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -47,17 +47,16 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/cpu.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/dmtimer.h>
+
+#include <mach/cpu.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/tc.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/dmtimer.h>
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 10a4fe88b2f..0e25a996bb4 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,12 +22,12 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
 #ifdef CONFIG_PM
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 #endif
 
 static struct clk * uart1_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 68f5b39030b..f3eac932092 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -34,8 +34,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 		.text
 
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 126d252062d..261cdc48228 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -10,8 +10,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 	.text
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 5d2b270935a..e54708595ec 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,7 +45,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index fbbdb806c95..e67760189d1 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,13 +46,13 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 struct sys_timer omap_timer;
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1682eb77c46..b72ca13b3ac 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -22,17 +22,17 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
@@ -103,7 +103,7 @@ static struct resource sdp2430_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 620fa0f120e..989ad152d7f 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,19 +29,19 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/led.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/control.h>
+#include <mach/gpio.h>
+#include <mach/led.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -337,17 +337,17 @@ static void __init apollon_sw_init(void)
 	omap_request_gpio(SW_DOWN_GPIO58);
 	omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
 
-	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
 				IRQF_SHARED, "enter sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
 				IRQF_SHARED, "up sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
 				IRQF_SHARED, "down sw",
 				&apollon_sw_interrupt))
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index df8be081e15..9ba097868e7 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,16 +20,16 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0d28f6897c8..9e2624ca70a 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -22,24 +22,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/gpmc.h>
+#include <mach/control.h>
+#include <mach/gpio.h>
+#include <mach/gpioexpander.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/irda.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 15675bce801..1d891e4a693 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -25,9 +25,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/cpu.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/cpu.h>
 #include <asm/div64.h>
 
 #include "memory.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 3cd37cb57c5..626e5fa93b6 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index aa567876651..295e671e9cf 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -28,8 +28,8 @@
 #include <linux/io.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 4263099b1ad..3ff74952f83 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -26,8 +26,8 @@
 #include <linux/io.h>
 #include <linux/limits.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 05757eb032b..ec664457a11 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #include "clock.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 51f70300996..5f3aad97784 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,8 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/control.h>
+#include <mach/common.h>
+#include <mach/control.h>
 
 static void __iomem *omap2_ctrl_base;
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index b603bc5f8e5..7a7f0255907 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,15 +14,15 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 #if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 
@@ -142,7 +142,7 @@ static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX)
 
-#include <asm/arch/mcspi.h>
+#include <mach/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index dbf68dc50ae..f51d69bc457 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -18,7 +18,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpmc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index dff4b16cead..a5d4526ac4d 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,8 +17,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/cpu.h>
+#include <mach/control.h>
+#include <mach/cpu.h>
 
 #if defined(CONFIG_ARCH_OMAP2420)
 #define TAP_BASE	io_p2v(0x48014000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 69c8174f3aa..987351f07d7 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,8 +21,8 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
 
 extern void omap_sram_init(void);
 extern int omap2_clk_init(void);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index f064f725e72..9ef15b31d8f 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 4799561c5a9..a480b96948e 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_REVISION		0x00
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 17cf199d113..b261f1f80b5 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,10 +17,10 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
 
 struct mcbsp_internal_clk {
 	struct clk clk;
@@ -134,6 +134,7 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP24XX
 static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP24XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -143,6 +144,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP24XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
@@ -161,6 +163,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP34XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -170,6 +173,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP34XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 73cadb2c75c..6b49cc9cbdc 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,9 +24,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "prm.h"
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8f98b20f30a..443d07fef7f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -29,8 +29,8 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
+#include <mach/control.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d6c9de82ca0..8671e1079ab 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -30,12 +30,11 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/pm.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/pm.h>
 
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index fd92a80f38f..f945156d558 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -18,8 +18,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/prcm.h>
+#include <mach/common.h>
+#include <mach/prcm.h>
 
 #include "clock.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1b1fe4f6e03..1a8bbd09406 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,7 +15,7 @@
  */
 #undef DEBUG
 
-#include <asm/arch/sdrc.h>
+#include <mach/sdrc.h>
 
 #ifndef __ASSEMBLER__
 extern void __iomem *omap2_sdrc_base;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e9c367fc9f6..adc8a26a8fb 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -20,8 +20,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static struct clk * uart1_ick = NULL;
 static struct clk * uart1_fck = NULL;
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 46ccb9b8b58..87a706fd5f8 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -23,8 +23,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 4c274510f3e..af4bd349022 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index a3fa48dc08c..84363e269e8 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 557603f9931..589393bedad 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -34,7 +34,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 80bb42eb508..10ef464d6be 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,9 +15,9 @@
 
 #include <linux/usb/musb.h>
 
-#include <asm/arch/gpmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 
 static u8		async_cs, sync_cs;
@@ -317,7 +317,6 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 		printk(error, 6, status);
 		return -ENODEV;
 	}
-	data->multipoint = 1;
 	tusb_device.dev.platform_data = data;
 
 	/* REVISIT let the driver know what DMA channels work */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 6f0dbda6c44..bea37972120 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index faf4e321191..7b11e552bc5 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -24,11 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -355,6 +356,103 @@ void __init orion5x_uart1_init(void)
 
 
 /*****************************************************************************
+ * XOR engine
+ ****************************************************************************/
+static struct resource orion5x_xor_shared_resources[] = {
+	{
+		.name	= "xor low",
+		.start	= ORION5X_XOR_PHYS_BASE,
+		.end	= ORION5X_XOR_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor high",
+		.start	= ORION5X_XOR_PHYS_BASE + 0x200,
+		.end	= ORION5X_XOR_PHYS_BASE + 0x2ff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device orion5x_xor_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(orion5x_xor_shared_resources),
+	.resource	= orion5x_xor_shared_resources,
+};
+
+static u64 orion5x_xor_dmamask = DMA_32BIT_MASK;
+
+static struct resource orion5x_xor0_resources[] = {
+	[0] = {
+		.start	= IRQ_ORION5X_XOR0,
+		.end	= IRQ_ORION5X_XOR0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data orion5x_xor0_data = {
+	.shared		= &orion5x_xor_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor0_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(orion5x_xor0_resources),
+	.resource	= orion5x_xor0_resources,
+	.dev		= {
+		.dma_mask		= &orion5x_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&orion5x_xor0_data,
+	},
+};
+
+static struct resource orion5x_xor1_resources[] = {
+	[0] = {
+		.start	= IRQ_ORION5X_XOR1,
+		.end	= IRQ_ORION5X_XOR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data orion5x_xor1_data = {
+	.shared		= &orion5x_xor_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor1_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(orion5x_xor1_resources),
+	.resource	= orion5x_xor1_resources,
+	.dev		= {
+		.dma_mask		= &orion5x_xor_dmamask,
+		.coherent_dma_mask	= DMA_64BIT_MASK,
+		.platform_data		= (void *)&orion5x_xor1_data,
+	},
+};
+
+void __init orion5x_xor_init(void)
+{
+	platform_device_register(&orion5x_xor_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, orion5x_xor0_data.cap_mask);
+	dma_cap_set(DMA_XOR, orion5x_xor0_data.cap_mask);
+	platform_device_register(&orion5x_xor0_channel);
+
+	dma_cap_set(DMA_MEMCPY, orion5x_xor1_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, orion5x_xor1_data.cap_mask);
+	dma_cap_set(DMA_XOR, orion5x_xor1_data.cap_mask);
+	platform_device_register(&orion5x_xor1_channel);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 static void orion5x_timer_init(void)
@@ -382,6 +480,8 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
 			*dev_name = "MV88F5281-D2";
 		} else if (*rev == MV88F5281_REV_D1) {
 			*dev_name = "MV88F5281-D1";
+		} else if (*rev == MV88F5281_REV_D0) {
+			*dev_name = "MV88F5281-D0";
 		} else {
 			*dev_name = "MV88F5281-Rev-Unsupported";
 		}
@@ -416,6 +516,15 @@ void __init orion5x_init(void)
 	 * Setup Orion address map
 	 */
 	orion5x_setup_cpu_mbus_bridge();
+
+	/*
+	 * Don't issue "Wait for Interrupt" instruction if we are
+	 * running on D0 5281 silicon.
+	 */
+	if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
+		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
+		disable_hlt();
+	}
 }
 
 /*
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f72cf0e7754..0bd195551a2 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -32,6 +32,7 @@ void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
+void orion5x_xor_init(void);
 
 /*
  * PCIe/PCI functions.
@@ -40,6 +41,7 @@ struct pci_bus;
 struct pci_sys_data;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_disable(void);
 void orion5x_pci_set_cardbus_mode(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 88405e74e5e..ff13e9060b1 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -24,8 +24,8 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/orion5x.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3791ca6f001..b38c65ccfb1 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -25,7 +25,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -245,12 +245,8 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
 static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("g760a", 0x3e),
-#if 0
-	/* this entry requires the new-style driver model lm75 driver,
-	 * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
 	}, {
-		I2C_BOARD_INFO("g751", 0x48),
-#endif
+		I2C_BOARD_INFO("lm75", 0x48),
 	}, {
 		I2C_BOARD_INFO("m41t80", 0x68),
 	},
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index d09797990f4..cd8a16f67d2 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 
 static DEFINE_SPINLOCK(gpio_lock);
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
new file mode 100644
index 00000000000..c7f808bfe27
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/orion5x.h>
+
+	.macro  addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
+	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-orion5x/include/mach/dma.h b/arch/arm/mach-orion5x/include/mach/dma.h
new file mode 100644
index 00000000000..40a8c178f10
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..4351937035c
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Orion platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/orion5x.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =MAIN_IRQ_CAUSE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #0]		@ main cause
+	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
+	mov	\irqnr, #0			@ default irqnr
+	@ find cause bits that are unmasked
+	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
+	clzne	\irqnr,	\irqstat		@ calc irqnr
+	rsbne	\irqnr, \irqnr, #31
+	.endm
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
new file mode 100644
index 00000000000..65dc136a86f
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern int gpio_request(unsigned pin, const char *label);
+extern void gpio_free(unsigned pin);
+extern int gpio_direction_input(unsigned pin);
+extern int gpio_direction_output(unsigned pin, int value);
+extern int gpio_get_value(unsigned pin);
+extern void gpio_set_value(unsigned pin, int value);
+extern void orion5x_gpio_set_blink(unsigned pin, int blink);
+extern void gpio_display(void);		/* debug */
+
+static inline int gpio_to_irq(int pin)
+{
+	return pin + IRQ_ORION5X_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	return irq - IRQ_ORION5X_GPIO_START;
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
new file mode 100644
index 00000000000..e51aaf4bf2b
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "orion5x.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x00001000
+#define PCIBIOS_MIN_MEM		0x01000000
+#define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 00000000000..f24b2513f7f
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "orion5x.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+	void __iomem *retval;
+	unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
+	if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
+	    size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
+		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
+	} else {
+		retval = __arm_ioremap(paddr, size, mtype);
+	}
+
+	return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
+		__iounmap(addr);
+}
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
+#define __arch_iounmap(a)	__arch_iounmap(a)
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+/*****************************************************************************
+ * Helpers to access Orion registers
+ ****************************************************************************/
+/*
+ * These are not preempt-safe.  Locks, if needed, must be taken
+ * care of by the caller.
+ */
+#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
+#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/include/mach/irqs.h
new file mode 100644
index 00000000000..d5b0fbf6b96
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/irqs.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/irqs.h
+ *
+ * IRQ definitions for Orion SoC
+ *
+ *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ *  This file is licensed under the terms of the GNU General Public
+ *  License version 2. This program is licensed "as is" without any
+ *  warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "orion5x.h"	/* need GPIO_MAX */
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION5X_BRIDGE		0
+#define IRQ_ORION5X_DOORBELL_H2C	1
+#define IRQ_ORION5X_DOORBELL_C2H	2
+#define IRQ_ORION5X_UART0		3
+#define IRQ_ORION5X_UART1		4
+#define IRQ_ORION5X_I2C			5
+#define IRQ_ORION5X_GPIO_0_7		6
+#define IRQ_ORION5X_GPIO_8_15		7
+#define IRQ_ORION5X_GPIO_16_23		8
+#define IRQ_ORION5X_GPIO_24_31		9
+#define IRQ_ORION5X_PCIE0_ERR		10
+#define IRQ_ORION5X_PCIE0_INT		11
+#define IRQ_ORION5X_USB1_CTRL		12
+#define IRQ_ORION5X_DEV_BUS_ERR		14
+#define IRQ_ORION5X_PCI_ERR		15
+#define IRQ_ORION5X_USB_BR_ERR		16
+#define IRQ_ORION5X_USB0_CTRL		17
+#define IRQ_ORION5X_ETH_RX		18
+#define IRQ_ORION5X_ETH_TX		19
+#define IRQ_ORION5X_ETH_MISC		20
+#define IRQ_ORION5X_ETH_SUM		21
+#define IRQ_ORION5X_ETH_ERR		22
+#define IRQ_ORION5X_IDMA_ERR		23
+#define IRQ_ORION5X_IDMA_0		24
+#define IRQ_ORION5X_IDMA_1		25
+#define IRQ_ORION5X_IDMA_2		26
+#define IRQ_ORION5X_IDMA_3		27
+#define IRQ_ORION5X_CESA		28
+#define IRQ_ORION5X_SATA		29
+#define IRQ_ORION5X_XOR0		30
+#define IRQ_ORION5X_XOR1		31
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION5X_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
new file mode 100644
index 00000000000..54dd76b013f
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/memory.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/memory.h
+ *
+ * Marvell Orion memory definitions
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
new file mode 100644
index 00000000000..61eb74a8886
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -0,0 +1,167 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/orion5x.h
+ *
+ * Generic definitions of Orion SoC flavors:
+ *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_ORION5X_H
+#define __ASM_ARCH_ORION5X_H
+
+/*****************************************************************************
+ * Orion Address Maps
+ *
+ * phys
+ * e0000000	PCIe MEM space
+ * e8000000	PCI MEM space
+ * f0000000	PCIe WA space (Orion-1/Orion-NAS only)
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe I/O space
+ * f2100000	PCI I/O space
+ * f4000000	device bus mappings (boot)
+ * fa000000	device bus mappings (cs0)
+ * fa800000	device bus mappings (cs2)
+ * fc000000	device bus mappings (cs0/cs1)
+ *
+ * virt		phys		size
+ * fdd00000	f1000000	1M	on-chip peripheral registers
+ * fde00000	f2000000	1M	PCIe I/O space
+ * fdf00000	f2100000	1M	PCI I/O space
+ * fe000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
+ ****************************************************************************/
+#define ORION5X_REGS_PHYS_BASE		0xf1000000
+#define ORION5X_REGS_VIRT_BASE		0xfdd00000
+#define ORION5X_REGS_SIZE		SZ_1M
+
+#define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
+#define ORION5X_PCIE_IO_VIRT_BASE	0xfde00000
+#define ORION5X_PCIE_IO_BUS_BASE	0x00000000
+#define ORION5X_PCIE_IO_SIZE		SZ_1M
+
+#define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
+#define ORION5X_PCI_IO_VIRT_BASE	0xfdf00000
+#define ORION5X_PCI_IO_BUS_BASE		0x00100000
+#define ORION5X_PCI_IO_SIZE		SZ_1M
+
+/* Relevant only for Orion-1/Orion-NAS */
+#define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
+#define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
+#define ORION5X_PCIE_WA_SIZE		SZ_16M
+
+#define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
+#define ORION5X_PCIE_MEM_SIZE		SZ_128M
+
+#define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
+#define ORION5X_PCI_MEM_SIZE		SZ_128M
+
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID	0x5181
+#define MV88F5181_REV_B1	3
+#define MV88F5181L_REV_A0	8
+#define MV88F5181L_REV_A1	9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID	0x5182
+#define MV88F5182_REV_A2	2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID	0x5281
+#define MV88F5281_REV_D0	4
+#define MV88F5281_REV_D1	5
+#define MV88F5281_REV_D2	6
+
+/*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
+#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
+
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
+#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
+
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
+
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
+
+#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
+#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_REG(x)		(ORION5X_XOR_VIRT_BASE | (x))
+
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
+
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
+
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
+#define GPIO_OUT		ORION5X_DEV_BUS_REG(0x100)
+#define GPIO_IO_CONF		ORION5X_DEV_BUS_REG(0x104)
+#define GPIO_BLINK_EN		ORION5X_DEV_BUS_REG(0x108)
+#define GPIO_IN_POL		ORION5X_DEV_BUS_REG(0x10c)
+#define GPIO_DATA_IN		ORION5X_DEV_BUS_REG(0x110)
+#define GPIO_EDGE_CAUSE		ORION5X_DEV_BUS_REG(0x114)
+#define GPIO_EDGE_MASK		ORION5X_DEV_BUS_REG(0x118)
+#define GPIO_LEVEL_MASK		ORION5X_DEV_BUS_REG(0x11c)
+#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
+#define GPIO_MAX		32
+
+/***************************************************************************
+ * Orion CPU Bridge Registers
+ **************************************************************************/
+#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
+#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
+#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
+#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
+#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
+#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
+#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
+#define  BRIDGE_INT_TIMER0	0x0002
+#define  BRIDGE_INT_TIMER1	0x0004
+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
+#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
new file mode 100644
index 00000000000..08e43075789
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/system.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable and issue soft reset
+	 */
+	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(CPU_SOFT_RESET, 1);
+}
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
new file mode 100644
index 00000000000..e82e44db762
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/timex.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define ORION5X_TCLK		166666667
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
new file mode 100644
index 00000000000..4322dba468a
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/uncompress.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/orion5x.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
new file mode 100644
index 00000000000..7147a297e97
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END       0xfd800000
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e2a0084ab4a..2545ff9e583 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -15,8 +15,8 @@
 #include <linux/irq.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/irq.h>
+#include <mach/orion5x.h>
+#include <plat/irq.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 	desc = irq_desc + irq;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		/*
@@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (cause & (1 << pin)) {
 			irq = gpio_to_irq(pin);
 			desc = irq_desc + irq;
-			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 				/* Swap polarity (race with GPIO line) */
 				u32 polarity = readl(GPIO_IN_POL);
 				polarity ^= 1 << pin;
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 84feac4a1fe..e321ec33183 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -24,8 +24,8 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <mach/orion5x.h>
+#include <plat/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -146,8 +146,10 @@ static struct hw_pci kurobox_pro_pci __initdata = {
 
 static int __init kurobox_pro_pci_init(void)
 {
-	if (machine_is_kurobox_pro())
+	if (machine_is_kurobox_pro()) {
+		orion5x_pci_disable();
 		pci_common_init(&kurobox_pro_pci);
+	}
 
 	return 0;
 }
@@ -356,6 +358,7 @@ static void __init kurobox_pro_init(void)
 	orion5x_sata_init(&kurobox_pro_sata_data);
 	orion5x_uart0_init();
 	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
 				   KUROBOX_PRO_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index a48cadb0159..c04ab0e16ea 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 7ce9e407d9d..53ff1893b88 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -25,7 +25,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -239,6 +239,7 @@ static void __init mss2_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&mss2_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
 	platform_device_register(&mss2_nor_flash);
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 55f3b0fdef8..978d4d59939 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -203,6 +203,7 @@ static void __init mv2120_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&mv2120_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
 	platform_device_register(&mv2120_nor_flash);
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 256a4f68093..a7b7d77b1b0 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -14,7 +14,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -541,6 +541,13 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
 
+static int orion5x_pci_disabled __initdata;
+
+void __init orion5x_pci_disable(void)
+{
+	orion5x_pci_disabled = 1;
+}
+
 void __init orion5x_pci_set_cardbus_mode(void)
 {
 	orion5x_pci_cardbus_mode = 1;
@@ -553,7 +560,7 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
 	if (nr == 0) {
 		orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
 		ret = pcie_setup(sys);
-	} else if (nr == 1) {
+	} else if (nr == 1 && !orion5x_pci_disabled) {
 		orion5x_pci_set_bus_nr(sys->busnr);
 		ret = pci_setup(sys);
 	}
@@ -567,7 +574,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys
 
 	if (nr == 0) {
 		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
-	} else if (nr == 1) {
+	} else if (nr == 1 && !orion5x_pci_disabled) {
 		bus = pci_scan_bus(sys->busnr, &pci_ops, sys);
 	} else {
 		bus = NULL;
@@ -584,7 +591,7 @@ int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCIe endpoint?
 	 */
-	if (bus < orion5x_pci_local_bus_nr())
+	if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
 		return IRQ_ORION5X_PCIE0_INT;
 
 	return -1;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index d50e3650a09..e72fe1e065e 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -15,12 +15,13 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init rd88f5181l_fxo_init(void)
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index b56447d32e1..a1fe3257320 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -15,13 +15,14 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 10ae6286426..4c3bcd76ac8 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -24,7 +24,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
 	if (gpio_request(pin, "PCI IntA") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
 	if (gpio_request(pin, "PCI IntB") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -292,6 +292,7 @@ static void __init rd88f5182_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&rd88f5182_sata_data);
 	orion5x_uart0_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
 				   RD88F5182_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index a9cef9703d5..9d689051419 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -26,7 +26,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);
@@ -207,12 +207,12 @@ static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
 
 static struct gpio_keys_button qnap_ts209_buttons[] = {
 	{
-		.code		= KEY_RESTART,
+		.code		= KEY_COPY,
 		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
 		.desc		= "USB Copy Button",
 		.active_low	= 1,
 	}, {
-		.code		= KEY_POWER,
+		.code		= KEY_RESTART,
 		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
 		.desc		= "Reset Button",
 		.active_low	= 1,
@@ -287,6 +287,10 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Configure peripherals.
 	 */
+	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+				   QNAP_TS209_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts209_nor_flash);
+
 	orion5x_ehci0_init();
 	orion5x_ehci1_init();
 	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
@@ -296,10 +300,8 @@ static void __init qnap_ts209_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&qnap_ts209_sata_data);
 	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-				   QNAP_TS209_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts209_nor_flash);
+	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	platform_device_register(&qnap_ts209_button_device);
 
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 32f0ff073b7..d85588ac7ef 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -3,6 +3,9 @@
  *
  * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
  *
+ * Copyright (C) 2008  Sylver Bruneau <sylver.bruneau@gmail.com>
+ * Copyright (C) 2008  Martin Michlmayr <tbm@cyrius.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -16,6 +19,7 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
@@ -24,7 +28,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
@@ -162,16 +166,59 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
 };
 
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+static struct gpio_led ts409_led_pins[] = {
+	{
+		.name		= "ts409:red:sata1",
+		.gpio		= 4,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata2",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata3",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata4",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data ts409_led_data = {
+	.leds		= ts409_led_pins,
+	.num_leds	= ARRAY_SIZE(ts409_led_pins),
+};
+
+static struct platform_device ts409_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &ts409_led_data,
+	},
+};
+
 /****************************************************************************
  * GPIO Attached Keys
  *     Power button is attached to the PIC microcontroller
  ****************************************************************************/
 
+#define QNAP_TS409_GPIO_KEY_RESET	14
 #define QNAP_TS409_GPIO_KEY_MEDIA	15
 
 static struct gpio_keys_button qnap_ts409_buttons[] = {
 	{
 		.code		= KEY_RESTART,
+		.gpio		= QNAP_TS409_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_COPY,
 		.gpio		= QNAP_TS409_GPIO_KEY_MEDIA,
 		.desc		= "USB Copy Button",
 		.active_low	= 1,
@@ -231,6 +278,10 @@ static void __init qnap_ts409_init(void)
 	/*
 	 * Configure peripherals.
 	 */
+	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
+				   QNAP_TS409_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts409_nor_flash);
+
 	orion5x_ehci0_init();
 	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
 				 qnap_ts409_partitions[5].offset,
@@ -238,10 +289,7 @@ static void __init qnap_ts409_init(void)
 	orion5x_eth_init(&qnap_tsx09_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
-				   QNAP_TS409_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts409_nor_flash);
+	orion5x_uart1_init();
 
 	platform_device_register(&qnap_ts409_button_device);
 
@@ -255,6 +303,7 @@ static void __init qnap_ts409_init(void)
 	if (qnap_ts409_i2c_rtc.irq == 0)
 		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */
 	pm_power_off = qnap_tsx09_power_off;
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 77e9f351f07..ae0a5dccd2a 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -256,6 +256,7 @@ static void __init ts78xx_init(void)
 	orion5x_sata_init(&ts78xx_sata_data);
 	orion5x_uart0_init();
 	orion5x_uart1_init();
+	orion5x_xor_init();
 
 	orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
 				   TS78XX_NOR_BOOT_SIZE);
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1af093ff8cf..b6bc43e07ee 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -14,11 +14,12 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = {
 
 static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wnr854t_init(void)
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index aeab55c6a82..b10da17b3fb 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -14,11 +14,12 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = {
 
 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wrt350n_v2_init(void)
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index a5268c3ac5a..24d036a24a7 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,10 +21,10 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include "clock.h"
 
 /*forward declaration*/
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 429c796938b..3ba46ede9bb 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -26,7 +26,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/irq.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dma.h>
+#include <mach/irq.h>
+#include <mach/clock.h>
+#include <mach/dma.h>
 
 struct resource spipnx_0_resources[] = {
 	{
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index fe152e82590..833c56be734 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -23,12 +23,12 @@
 #include <linux/clk.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/dma-mapping.h>
 #include <asm/io.h>
 #include <asm/mach/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index ef179cab80e..fb51f7279e9 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -18,8 +18,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/gpio.h>
 
 /* register definitions */
 #define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 6f308827c4f..87c093286ff 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -14,8 +14,8 @@
 #include <linux/i2c-pnx.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/i2c.h>
+#include <mach/platform.h>
+#include <mach/i2c.h>
 
 static int set_clock_run(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
new file mode 100644
index 00000000000..8d2a5ef52c9
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clock.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/clock.h
+ *
+ * Clock control driver for PNX4008 - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_CLOCK_H__
+#define __PNX4008_CLOCK_H__
+
+struct module;
+struct clk;
+
+#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
+#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
+#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
+#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
+#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
+#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
+#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
+#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
+#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
+#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
+#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
+#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
+#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
+#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
+#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
+#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
+#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
+#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
+#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
+#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
+#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
+#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
+#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
+
+#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
+#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
+#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
+#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
+#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
+
+#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
+
+#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
+
+#define CLK_RATE_13MHZ 13000
+#define CLK_RATE_1MHZ 1000
+#define CLK_RATE_208MHZ 208000
+#define CLK_RATE_48MHZ 48000
+#define CLK_RATE_32KHZ 32
+
+#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
new file mode 100644
index 00000000000..6d1407f319f
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		mov	\rx, #0x00090000
+		addeq	\rx, \rx, #0x40000000
+		addne	\rx, \rx, #0xf4000000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
new file mode 100644
index 00000000000..5442d04fc57
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/dma.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/dma.h
+ *
+ *  PNX4008 DMA header file
+ *
+ *  Author:	Vitaly Wool
+ *  Copyright:	MontaVista Software Inc. (c) 2005
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "platform.h"
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	8
+
+#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
+#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
+#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
+#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
+#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
+#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
+#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
+#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
+#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
+#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
+#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
+#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
+#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
+
+enum {
+	WIDTH_BYTE = 0,
+	WIDTH_HWORD,
+	WIDTH_WORD
+};
+
+enum {
+	FC_MEM2MEM_DMA,
+	FC_MEM2PER_DMA,
+	FC_PER2MEM_DMA,
+	FC_PER2PER_DMA,
+	FC_PER2PER_DPER,
+	FC_MEM2PER_PER,
+	FC_PER2MEM_PER,
+	FC_PER2PER_SPER
+};
+
+enum {
+	DMA_INT_UNKNOWN = 0,
+	DMA_ERR_INT = 1,
+	DMA_TC_INT = 2,
+};
+
+enum {
+	DMA_BUFFER_ALLOCATED = 1,
+	DMA_HAS_LL = 2,
+};
+
+enum {
+	PER_CAM_DMA_1 = 0,
+	PER_NDF_FLASH = 1,
+	PER_MBX_SLAVE_FIFO = 2,
+	PER_SPI2_REC_XMIT = 3,
+	PER_MS_SD_RX_XMIT = 4,
+	PER_HS_UART_1_XMIT = 5,
+	PER_HS_UART_1_RX = 6,
+	PER_HS_UART_2_XMIT = 7,
+	PER_HS_UART_2_RX = 8,
+	PER_HS_UART_7_XMIT = 9,
+	PER_HS_UART_7_RX = 10,
+	PER_SPI1_REC_XMIT = 11,
+	PER_MLC_NDF_SREC = 12,
+	PER_CAM_DMA_2 = 13,
+	PER_PRNG_INFIFO = 14,
+	PER_PRNG_OUTFIFO = 15,
+};
+
+struct pnx4008_dma_ch_ctrl {
+	int tc_mask;
+	int cacheable;
+	int bufferable;
+	int priv_mode;
+	int di;
+	int si;
+	int dest_ahb1;
+	int src_ahb1;
+	int dwidth;
+	int swidth;
+	int dbsize;
+	int sbsize;
+	int tr_size;
+};
+
+struct pnx4008_dma_ch_config {
+	int halt;
+	int active;
+	int lock;
+	int itc;
+	int ie;
+	int flow_cntrl;
+	int dest_per;
+	int src_per;
+};
+
+struct pnx4008_dma_ll {
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	u32 next_dma;
+	unsigned long ch_ctrl;
+	struct pnx4008_dma_ll *next;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+struct pnx4008_dma_config {
+	int is_ll;
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	unsigned long ch_ctrl;
+	unsigned long ch_cfg;
+	struct pnx4008_dma_ll *ll;
+	u32 ll_dma;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
+extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
+extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
+
+extern int pnx4008_request_channel(char *, int,
+				   void (*)(int, int, void *),
+				   void *);
+extern void pnx4008_free_channel(int);
+extern int pnx4008_config_dma(int, int, int);
+extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
+				    unsigned long *);
+extern int pnx4008_dma_parse_control(unsigned long,
+				     struct pnx4008_dma_ch_ctrl *);
+extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
+				   unsigned long *);
+extern int pnx4008_dma_parse_config(unsigned long,
+				    struct pnx4008_dma_ch_config *);
+extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
+extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
+extern int pnx4008_dma_ch_enable(int);
+extern int pnx4008_dma_ch_disable(int);
+extern int pnx4008_dma_ch_enabled(int);
+extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
+					 struct pnx4008_dma_ch_ctrl *);
+extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
+				       struct pnx4008_dma_ch_ctrl *);
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
new file mode 100644
index 00000000000..8003037578e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PNX4008-based platforms
+ *
+ * 2005-2006 (c) MontaVista Software, Inc.
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "platform.h"
+
+#define IO_BASE         0xF0000000
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#define INTRC_MASK			0x00
+#define INTRC_RAW_STAT			0x04
+#define INTRC_STAT			0x08
+#define INTRC_POLAR			0x0C
+#define INTRC_ACT_TYPE			0x10
+#define INTRC_TYPE			0x14
+
+#define SIC1_BASE_INT   32
+#define SIC2_BASE_INT   64
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* decode the MIC interrupt numbers */
+		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+		ldr	\irqstat, [\base, #INTRC_STAT]
+
+		cmp	\irqstat,#1<<16
+		movhs	\irqnr,#16
+		movlo	\irqnr,#0
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+/* was there an interrupt ? if not then drop out with EQ status */
+		teq	\irqstat,#0
+		beq	1003f
+
+/* and now check for extended IRQ reasons */
+		cmp	\irqnr,#1
+		bls	1003f
+		cmp	\irqnr,#30
+		blo	1002f
+
+/* IRQ 31,30  : High priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
+/* set the base IRQ number */
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		moveq  \irqnr,#SIC1_BASE_INT
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		movne   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		and	\irqstat,\irqstat,\tmp
+		b	1004f
+
+1003:
+/* IRQ 1,0  : Low priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
+/* read the correct SIC */
+/* set the base IRQ number  */
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		movne   \irqnr,#SIC1_BASE_INT
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		moveq   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		bic	\irqstat,\irqstat,\tmp
+
+1004:
+
+		cmp	\irqstat,#1<<16
+		addhs	\irqnr,\irqnr,#16
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+
+/* is irqstat not zero */
+
+1002:
+/* we assert that irqstat is not equal to zero and return ne status if true*/
+		teq	\irqstat,#0
+1003:
+		.endm
+
+
+		.macro	irq_prio_table
+		.endm
+
+
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio.h
new file mode 100644
index 00000000000..9591467eb9e
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/gpio.h
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/gpio.h
+ *
+ * PNX4008 GPIO driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _PNX4008_GPIO_H_
+#define _PNX4008_GPIO_H_
+
+
+/* Block numbers */
+#define GPIO_IN		(0)
+#define GPIO_OUT		(0x100)
+#define GPIO_BID		(0x200)
+#define GPIO_RAM		(0x300)
+#define GPIO_MUX		(0x400)
+
+#define GPIO_TYPE_MASK(K) ((K) & 0x700)
+
+/* INPUT GPIOs */
+/* GPI */
+#define GPI_00		(GPIO_IN | 0)
+#define GPI_01		(GPIO_IN | 1)
+#define GPI_02   	(GPIO_IN | 2)
+#define GPI_03 	 	(GPIO_IN | 3)
+#define GPI_04   	(GPIO_IN | 4)
+#define GPI_05   	(GPIO_IN | 5)
+#define GPI_06   	(GPIO_IN | 6)
+#define GPI_07   	(GPIO_IN | 7)
+#define GPI_08   	(GPIO_IN | 8)
+#define GPI_09   	(GPIO_IN | 9)
+#define U1_RX 		(GPIO_IN | 15)
+#define U2_HTCS 	(GPIO_IN | 16)
+#define U2_RX	 	(GPIO_IN | 17)
+#define U3_RX		(GPIO_IN | 18)
+#define U4_RX		(GPIO_IN | 19)
+#define U5_RX		(GPIO_IN | 20)
+#define U6_IRRX 	(GPIO_IN | 21)
+#define U7_HCTS 	(GPIO_IN | 22)
+#define U7_RX		(GPIO_IN | 23)
+/* MISC IN */
+#define SPI1_DATIN	(GPIO_IN | 25)
+#define DISP_SYNC	(GPIO_IN | 26)
+#define SPI2_DATIN	(GPIO_IN | 27)
+#define GPI_11  	(GPIO_IN | 28)
+
+#define GPIO_IN_MASK   0x1eff83ff
+
+/* OUTPUT GPIOs */
+/* GPO */
+#define GPO_00		(GPIO_OUT | 0)
+#define GPO_01   	(GPIO_OUT | 1)
+#define GPO_02   	(GPIO_OUT | 2)
+#define GPO_03 	 	(GPIO_OUT | 3)
+#define GPO_04   	(GPIO_OUT | 4)
+#define GPO_05   	(GPIO_OUT | 5)
+#define GPO_06   	(GPIO_OUT | 6)
+#define GPO_07   	(GPIO_OUT | 7)
+#define GPO_08		(GPIO_OUT | 8)
+#define GPO_09   	(GPIO_OUT | 9)
+#define GPO_10   	(GPIO_OUT | 10)
+#define GPO_11 	 	(GPIO_OUT | 11)
+#define GPO_12   	(GPIO_OUT | 12)
+#define GPO_13   	(GPIO_OUT | 13)
+#define GPO_14   	(GPIO_OUT | 14)
+#define GPO_15   	(GPIO_OUT | 15)
+#define GPO_16  	(GPIO_OUT | 16)
+#define GPO_17 	 	(GPIO_OUT | 17)
+#define GPO_18   	(GPIO_OUT | 18)
+#define GPO_19   	(GPIO_OUT | 19)
+#define GPO_20   	(GPIO_OUT | 20)
+#define GPO_21   	(GPIO_OUT | 21)
+#define GPO_22   	(GPIO_OUT | 22)
+#define GPO_23   	(GPIO_OUT | 23)
+
+#define GPIO_OUT_MASK   0xffffff
+
+/* BIDIRECTIONAL GPIOs */
+/* RAM pins */
+#define RAM_D19		(GPIO_RAM | 0)
+#define RAM_D20  	(GPIO_RAM | 1)
+#define RAM_D21  	(GPIO_RAM | 2)
+#define RAM_D22 	(GPIO_RAM | 3)
+#define RAM_D23  	(GPIO_RAM | 4)
+#define RAM_D24  	(GPIO_RAM | 5)
+#define RAM_D25  	(GPIO_RAM | 6)
+#define RAM_D26  	(GPIO_RAM | 7)
+#define RAM_D27		(GPIO_RAM | 8)
+#define RAM_D28  	(GPIO_RAM | 9)
+#define RAM_D29  	(GPIO_RAM | 10)
+#define RAM_D30 	(GPIO_RAM | 11)
+#define RAM_D31  	(GPIO_RAM | 12)
+
+#define GPIO_RAM_MASK   0x1fff
+
+/* I/O pins */
+#define GPIO_00  	(GPIO_BID | 25)
+#define GPIO_01 	(GPIO_BID | 26)
+#define GPIO_02  	(GPIO_BID | 27)
+#define GPIO_03  	(GPIO_BID | 28)
+#define GPIO_04 	(GPIO_BID | 29)
+#define GPIO_05  	(GPIO_BID | 30)
+
+#define GPIO_BID_MASK   0x7e000000
+
+/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
+#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
+
+#define GPIO_MUX_MASK   0x8
+
+/* Extraction/assembly macros */
+#define GPIO_BIT_MASK(K) ((K) & 0x1F)
+#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
+#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
+#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
+#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
+#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
+#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+#define SE_USB_OTG_ATX_INT_N    19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT        17
+#define SE_KEY_IRQ              16
+#define SE_DSP_SLAVEPORT_INT    15
+#define SE_DSP_GPIO1_INT        14
+#define SE_DSP_GPIO0_INT        13
+#define SE_DSP_AHB_INT          12
+/*11-6 unused*/
+#define SE_GPIO_05_INT          5
+#define SE_GPIO_04_INT          4
+#define SE_GPIO_03_INT          3
+#define SE_GPIO_02_INT          2
+#define SE_GPIO_01_INT          1
+#define SE_GPIO_00_INT          0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern int pnx4008_gpio_register_pin(unsigned short pin);
+extern int pnx4008_gpio_unregister_pin(unsigned short pin);
+extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
+extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
+extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
+extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
+
+static inline void start_int_umask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+#endif				/* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
new file mode 100644
index 00000000000..7b98b828d36
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/* Start of virtual addresses for IO devices */
+#define IO_BASE         0xF0000000
+
+/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
new file mode 100644
index 00000000000..259ac53abf4
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/i2c.h
@@ -0,0 +1,64 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H__
+#define __ASM_ARCH_I2C_H__
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+#define HCLK_MHZ		13
+#define I2C_CHIP_NAME		"PNX4008-I2C"
+
+#endif				/* __ASM_ARCH_I2C_H___ */
diff --git a/arch/arm/mach-pnx4008/include/mach/io.h b/arch/arm/mach-pnx4008/include/mach/io.h
new file mode 100644
index 00000000000..c6206f25839
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/io.h
@@ -0,0 +1,21 @@
+
+/*
+ *  arch/arm/mach-pnx4008/include/mach/io.h
+ *
+ * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
new file mode 100644
index 00000000000..2a690ca3387
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irq.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ * this one is used in entry-arnv.S as well so it cannot contain C code
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __PNX4008_IRQ_H__
+#define __PNX4008_IRQ_H__
+
+#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+
+/* Manual: Chapter 20, page 195 */
+
+#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
+
+#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
+#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
+#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
+#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
+#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
+#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern void __init pnx4008_init_irq(void);
+
+#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
new file mode 100644
index 00000000000..f6b33cf23ae
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irqs.h
@@ -0,0 +1,215 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irqs.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_IRQS_h__
+#define __PNX4008_IRQS_h__
+
+#define NR_IRQS         96
+
+/*Manual: table 259, page 199*/
+
+/*SUB2 Interrupt Routing (SIC2)*/
+
+#define SIC2_BASE_INT   64
+
+#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
+#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
+#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
+#define GPI_06_INT         92
+#define GPI_05_INT         91
+#define GPI_04_INT         90
+#define GPI_03_INT         89
+#define GPI_02_INT         88
+#define GPI_01_INT         87
+#define GPI_00_INT         86
+#define BT_CLKREQ_INT      85
+#define SPI1_DATIN_INT     84
+#define U5_RX_INT          83
+#define SDIO_INT_N         82
+#define CAM_HS_INT         81
+#define CAM_VS_INT         80
+#define GPI_07_INT         79
+#define DISP_SYNC_INT      78
+#define DSP_INT8           77
+#define U7_HCTS_INT        76
+#define GPI_10_INT         75
+#define GPI_09_INT         74
+#define GPI_08_INT         73
+#define DSP_INT7           72
+#define U2_HCTS_INT        71
+#define SPI2_DATIN_INT     70
+#define GPIO_05_INT        69
+#define GPIO_04_INT        68
+#define GPIO_03_INT        67
+#define GPIO_02_INT        66
+#define GPIO_01_INT        65
+#define GPIO_00_INT        64
+
+/*Manual: table 258, page 198*/
+
+/*SUB1 Interrupt Routing (SIC1)*/
+
+#define SIC1_BASE_INT   32
+
+#define USB_I2C_INT        63
+#define USB_DEV_HP_INT     62
+#define USB_DEV_LP_INT     61
+#define USB_DEV_DMA_INT    60
+#define USB_HOST_INT       59
+#define USB_OTG_ATX_INT_N  58
+#define USB_OTG_TIMER_INT  57
+#define SW_INT             56
+#define SPI1_INT           55
+#define KEY_IRQ            54
+#define DSP_M_INT          53
+#define RTC_INT            52
+#define I2C_1_INT          51
+#define I2C_2_INT          50
+#define PLL1_LOCK_INT      49
+#define PLL2_LOCK_INT      48
+#define PLL3_LOCK_INT      47
+#define PLL4_LOCK_INT      46
+#define PLL5_LOCK_INT      45
+#define SPI2_INT           44
+#define DSP_INT1           43
+#define DSP_INT2           42
+#define DSP_TDM_INT2       41
+#define TS_AUX_INT         40
+#define TS_IRQ             39
+#define TS_P_INT           38
+#define UOUT1_TO_PAD_INT   37
+#define GPI_11_INT         36
+#define DSP_INT4           35
+#define JTAG_COMM_RX_INT   34
+#define JTAG_COMM_TX_INT   33
+#define DSP_INT3           32
+
+/*Manual: table 257, page 197*/
+
+/*MAIN Interrupt Routing*/
+
+#define MAIN_BASE_INT   0
+
+#define SUB2_FIQ_N         31	/*active low */
+#define SUB1_FIQ_N         30	/*active low */
+#define JPEG_INT           29
+#define DMA_INT            28
+#define MSTIMER_INT        27
+#define IIR1_INT           26
+#define IIR2_INT           25
+#define IIR7_INT           24
+#define DSP_TDM_INT0       23
+#define DSP_TDM_INT1       22
+#define DSP_P_INT          21
+#define DSP_INT0           20
+#define DUM_INT            19
+#define UOUT0_TO_PAD_INT   18
+#define MP4_ENC_INT        17
+#define MP4_DEC_INT        16
+#define SD0_INT            15
+#define MBX_INT            14
+#define SD1_INT            13
+#define MS_INT_N           12
+#define FLASH_INT          11 /*NAND*/
+#define IIR6_INT           10
+#define IIR5_INT           9
+#define IIR4_INT           8
+#define IIR3_INT           7
+#define WATCH_INT          6
+#define HSTIMER_INT        5
+#define ARCH_TIMER_IRQ     HSTIMER_INT
+#define CAM_INT            4
+#define PRNG_INT           3
+#define CRYPTO_INT         2
+#define SUB2_IRQ_N         1	/*active low */
+#define SUB1_IRQ_N         0	/*active low */
+
+#define PNX4008_IRQ_TYPES \
+{                                           /*IRQ #'s: */         \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
+}
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+
+#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
new file mode 100644
index 00000000000..5789a2d16f5
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/memory.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/memory.h
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     (0x80000000)
+
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
new file mode 100644
index 00000000000..6ea02f2176b
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/param.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define HZ 100
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
new file mode 100644
index 00000000000..368c2c10a30
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/platform.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/platform.h
+ *
+ * PNX4008 Base addresses - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+
+#ifndef __ASM_ARCH_PLATFORM_H__
+#define __ASM_ARCH_PLATFORM_H__
+
+#define PNX4008_IRAM_BASE		0x08000000
+#define PNX4008_IRAM_SIZE		0x00010000
+#define PNX4008_YUV_SLAVE_BASE		0x10000000
+#define PNX4008_DUM_SLAVE_BASE		0x18000000
+#define PNX4008_NDF_FLASH_BASE		0x20020000
+#define PNX4008_SPI1_BASE		0x20088000
+#define PNX4008_SPI2_BASE		0x20090000
+#define PNX4008_SD_CONFIG_BASE		0x20098000
+#define PNX4008_FLASH_DATA		0x200B0000
+#define PNX4008_MLC_FLASH_BASE		0x200B8000
+#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
+#define PNX4008_DMA_CONFIG_BASE		0x31000000
+#define PNX4008_USB_CONFIG_BASE		0x31020000
+#define PNX4008_SDRAM_CFG_BASE		0x31080000
+#define PNX4008_AHB2FAB_BASE		0x40000000
+#define PNX4008_PWRMAN_BASE		0x40004000
+#define PNX4008_INTCTRLMIC_BASE		0x40008000
+#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
+#define PNX4008_INTCTRLSIC2_BASE	0x40010000
+#define PNX4008_HSUART1_BASE		0x40014000
+#define PNX4008_HSUART2_BASE		0x40018000
+#define PNX4008_HSUART7_BASE		0x4001C000
+#define PNX4008_RTC_BASE		0x40024000
+#define PNX4008_PIO_BASE		0x40028000
+#define PNX4008_MSTIMER_BASE		0x40034000
+#define PNX4008_HSTIMER_BASE		0x40038000
+#define PNX4008_WDOG_BASE		0x4003C000
+#define PNX4008_DEBUG_BASE		0x40040000
+#define PNX4008_TOUCH1_BASE		0x40048000
+#define PNX4008_KEYSCAN_BASE		0x40050000
+#define PNX4008_UARTCTRL_BASE		0x40054000
+#define PNX4008_PWM_BASE		0x4005C000
+#define PNX4008_UART3_BASE		0x40080000
+#define PNX4008_UART4_BASE		0x40088000
+#define PNX4008_UART5_BASE		0x40090000
+#define PNX4008_UART6_BASE		0x40098000
+#define PNX4008_I2C1_BASE		0x400A0000
+#define PNX4008_I2C2_BASE		0x400A8000
+#define PNX4008_MAGICGATE_BASE		0x400B0000
+#define PNX4008_DUMCONF_BASE		0x400B8000
+#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
+#define PNX4008_DSP_BASE		0x400C0000
+#define PNX4008_PROFCOUNTER_BASE	0x400C8000
+#define PNX4008_CRYPTO_BASE		0x400D0000
+#define PNX4008_CAMIFCONF_BASE		0x400D8000
+#define PNX4008_YUV2RGB_BASE		0x400E0000
+#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
new file mode 100644
index 00000000000..2fa685bff85
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/pm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/pm.h
+ *
+ * PNX4008 Power Management Routiness - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_PNX4008_PM_H
+#define __ASM_ARCH_PNX4008_PM_H
+
+#ifndef __ASSEMBLER__
+#include "irq.h"
+#include "irqs.h"
+#include "clock.h"
+
+extern void pnx4008_pm_idle(void);
+extern void pnx4008_pm_suspend(void);
+extern unsigned int pnx4008_cpu_suspend_sz;
+extern void pnx4008_cpu_suspend(void);
+extern unsigned int pnx4008_cpu_standby_sz;
+extern void pnx4008_cpu_standby(void);
+
+extern int pnx4008_startup_pll(struct clk *);
+extern int pnx4008_shutdown_pll(struct clk *);
+
+#endif				/* ASSEMBLER */
+#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
new file mode 100644
index 00000000000..8985a4622b8
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/system.h
+ *
+ * Copyright (C) 2003 Philips Semiconductors
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
new file mode 100644
index 00000000000..956fbd8e977
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PNX4008_TIMEX_H
+#define __PNX4008_TIMEX_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define CLOCK_TICK_RATE		1000000
+
+#define TICKS2USECS(x)	(x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT        1
+#define RESET_COUNT0   (1<<1)
+#define STOP_COUNT0    (1<<2)
+#define MR1_INT        (1<<3)
+#define RESET_COUNT1   (1<<4)
+#define STOP_COUNT1    (1<<5)
+#define MR2_INT        (1<<6)
+#define RESET_COUNT2   (1<<7)
+#define STOP_COUNT2    (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB     1
+#define RESET_COUNT    (1<<1)
+#define DEBUG_EN       (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT     1
+#define MATCH1_INT     (1<<1)
+#define MATCH2_INT     (1<<2)
+#define RTC_TICK0      (1<<4)
+#define RTC_TICK1      (1<<5)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
new file mode 100644
index 00000000000..bb4751ee253
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART5_BASE 0x40090000
+
+#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
+#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
+
+static __inline__ void putc(char c)
+{
+	while (UART5_FR & (1 << 5))
+		barrier();
+
+	UART5_DR = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
new file mode 100644
index 00000000000..2ad398378ae
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/vmalloc.h
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 968d0b02759..5c4f55af5d4 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,17 +23,16 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
 
 static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
 
@@ -56,28 +55,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq)
 static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
 {
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/*rising edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*falling edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*low level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/* high level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
 
-	/* IRQT_BOTHEDGE is not supported */
+	/* IRQ_TYPE_EDGE_BOTH is not supported */
 	default:
 		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
 		return -1;
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 40116d25434..f970906d884 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -20,10 +20,9 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/cacheflush.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/clock.h>
+#include <mach/pm.h>
+#include <mach/clock.h>
 
 #define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
 
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index 95a1b3f964a..9be84bbb30e 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -15,14 +15,14 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/platform.h>
-#include <asm/hardware.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
 
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #define UART_3		0
 #define UART_4		1
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
index fea1e17a365..f4eed495d29 100644
--- a/arch/arm/mach-pnx4008/sleep.S
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -13,7 +13,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
 #define PWR_CTRL_REG_OFFS 0x44
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 6d4ca8fc0cb..180975244f9 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -24,7 +24,7 @@
 #include <linux/irq.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 914bb33dab9..e8ee7ec9ff6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,18 +16,24 @@ config CPU_PXA310
 config CPU_PXA320
 	bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+	bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
 
-menu "Select target boards"
-
 config ARCH_GUMSTIX
 	bool "Gumstix XScale boards"
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+	bool "Basix, Connex, ws-200ax, ws-400ax systems"
+	depends on ARCH_GUMSTIX
+	select PXA25x
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -58,6 +64,57 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
+
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -70,10 +127,19 @@ config MACH_E330
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e330 family PDA.
 
+config MACH_E350
+	bool "Toshiba e350"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
+
 config MACH_E740
 	bool "Toshiba e740"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e740 family PDA.
@@ -82,6 +148,7 @@ config MACH_E750
 	bool "Toshiba e750"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e750 family PDA.
@@ -98,6 +165,7 @@ config MACH_E800
 	bool "Toshiba e800"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
@@ -106,6 +174,10 @@ config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	select PXA27x
 
+config MACH_TRIZEPS4_CONXS
+	bool "ConXS Eval Board"
+	depends on MACH_TRIZEPS4
+
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
@@ -115,7 +187,7 @@ config MACH_COLIBRI
 	select PXA27x
 
 config MACH_ZYLONITE
-	bool "PXA3xx Development Platform"
+	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
 	select HAVE_PWM
 
@@ -124,6 +196,16 @@ config MACH_LITTLETON
 	select PXA3xx
 	select PXA_SSP
 
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
+	select PXA930
+
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
+	select PXA930
+
 config MACH_ARMCORE
 	bool "CompuLab CM-X270 modules"
 	select PXA27x
@@ -131,7 +213,6 @@ config MACH_ARMCORE
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	depends on ARCH_PXA
 	select PXA27x
 	select IWMMXT
 
@@ -139,18 +220,26 @@ config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
+	select PXA_SSP
 
-endmenu
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+	select HAVE_PWM
 
-choice
-	prompt "Used baseboard"
-	depends on MACH_PCM027
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
-
-endchoice
+	depends on MACH_PCM027
 
 choice
 	prompt "display on pcm990"
@@ -167,88 +256,45 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
-if ARCH_GUMSTIX
-
-choice
-	prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-	bool "Basix, Connex, ws-200ax, ws-400ax systems"
-	select PXA25x
-
-endchoice
-
-endif
 
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
 
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
 
-choice
-	prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_CONXS
-	bool "ConXS Eval Board"
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_ANY
-	bool "another Board"
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
 
-endchoice
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
 
-endif
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
 
 endmenu
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select SHARP_LOCOMO
-	select PXA_SSP
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-
 config PXA25x
 	bool
 	help
@@ -288,4 +334,13 @@ config PXA_PWM
 	default BACKLIGHT_PWM
 	help
 	  Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4..99ecbe7f850 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
-				   time.o gpio.o
+				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
 
@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
+obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
@@ -36,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
+obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
+obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
+obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
@@ -44,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -59,3 +68,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 254892ac30c..5c67b188a3b 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -19,7 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
-#include <asm/arch/akita.h>
+#include <mach/akita.h>
 
 /* MAX7310 Regiser Map */
 #define MAX7310_INPUT    0x00
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index b4d04955dcb..ca8e2053815 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,9 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/hardware.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-	pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
 	CKEN |= 1 << clk->cken;
@@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
 	.disable	= clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-	{
-		.name		= "GPIO27_CLK",
-		.ops		= &clk_gpio27_ops,
-		.rate		= 3686400,
-	},
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
 	int i;
@@ -149,9 +126,27 @@ void clks_register(struct clk *clks, size_t num)
 	mutex_unlock(&clocks_mutex);
 }
 
-static int __init clk_init(void)
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev)
 {
-	clks_register(common_clks, ARRAY_SIZE(common_clks));
+	struct clk *r = clk_lookup(dev, id);
+	struct clk *new;
+
+	if (!r)
+		return -ENODEV;
+
+	new = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	if (!new)
+		return -ENOMEM;
+
+	new->name = alias;
+	new->dev = alias_dev;
+	new->other = r;
+
+	mutex_lock(&clocks_mutex);
+	list_add(&new->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+
 	return 0;
 }
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 83cbfaba485..73be795fe3b 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,3 +1,5 @@
+#include <linux/list.h>
+
 struct clk;
 
 struct clkops {
@@ -47,9 +49,45 @@ struct clk {
 		.other	= _other,			\
 	}
 
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+	{                                               \
+		.name   = _name,                        \
+		.dev    = _dev,                         \
+		.ops    = _ops,                         \
+		.rate   = _rate,                        \
+		.delay	= _delay,			\
+	}
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev);
+
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 319c9ff3ab9..2d5bcea1e52 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
 	if (machine_is_armcore()) {
-		pr_info("Adjusting zones for CM-x270\n");
+		pr_info("Adjusting zones for CM-X270\n");
 
 		/*
 		 * Only adjust if > 64M on current system
@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+	GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
 
 	it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
 {
 	it8152_init_irq();
-	pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-	set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-	set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-				cmx270_it8152_irq_demux);
+	cmx270_it8152_irq_gpio = irq_gpio;
+
+	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/*
 	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-x270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-x270.
+	  but defining a platform for each possible base of CM-X270 is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X270.
 	*/
 	/* ATXBASE PCI slot */
 	if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a..48f532f4cb5 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
 extern void __cmx270_pci_suspend(void);
 extern void __cmx270_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
 #else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
 #endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 01b9964acec..af003a26953 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,44 +9,156 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/bitfield.h>
 
 #include <asm/hardware/it8152.h>
 
 #include "generic.h"
 #include "cm-x270-pci.h"
 
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE	(0xe8000000)
+#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
+
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
 #define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
 
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ		(10)
+#define GPIO22_IT8152_IRQ	(22)
+#define GPIO83_MMC_IRQ		(83)
+#define GPIO95_GFXIRQ		(95)
+
+#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER	(105)
+
+static unsigned long cmx270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
+	GPIO53_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO89_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO10_GPIO,	/* DM9000 interrupt */
+	GPIO83_GPIO,	/* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
 	[0] = {
 		.start = DM9000_PHYS_BASE,
 		.end   = DM9000_PHYS_BASE + 4,
@@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9k_resource),
-	.resource	= cmx270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
+	.resource	= cmx270_dm9000_resource,
 	.dev		= {
-		.platform_data = &cmx270_dm9k_platdata,
+		.platform_data = &cmx270_dm9000_platdata,
 	}
 };
 
-/* touchscreen controller */
+static void __init cmx270_init_dm9000(void)
+{
+	platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx270_ts_device = {
 	.name		= "ucb1400_ts",
 	.id		= -1,
 };
 
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+	platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
 	[0] = {
 		.start = RTC_PHYS_BASE,
@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
 	}
 };
 
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+	platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+	[0] = {
+		.name = "cm-x270:red",
+		.default_trigger = "nand-disk",
+		.gpio = 93,
+		.active_low = 1,
+	},
+	[1] = {
+		.name = "cm-x270:green",
+		.default_trigger = "heartbeat",
+		.gpio = 94,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx270_leds),
+	.leds = cmx270_leds,
+};
+
 static struct platform_device cmx270_led_device = {
-	.name		= "cm-x270-led",
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx270_gpio_led_pdata,
+	},
 };
 
+static void __init cmx270_init_leds(void)
+{
+	platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
 	/* frame buffer memory including ODFB and External SDRAM */
 	[0] = {
-		.start = MARATHON_PHYS,
-		.end   = MARATHON_PHYS + 0x02000000,
+		.start = PXA_CS2_PHYS,
+		.end   = PXA_CS2_PHYS + 0x01ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 	/* Marathon registers */
 	[1] = {
-		.start = MARATHON_PHYS + 0x03fe0000,
-		.end   = MARATHON_PHYS + 0x03ffffff,
+		.start = PXA_CS2_PHYS + 0x03fe0000,
+		.end   = PXA_CS2_PHYS + 0x03ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
 	.id		= -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-	.name = "pata_cm_x270",
-	.id = -1,
-	.dev		= {
-		.dma_mask	= &ata_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&cmx270_device_dm9k,
-	&cmx270_rtc_device,
-	&cmx270_2700G,
-	&cmx270_led_device,
-	&cmx270_ts_device,
-	&cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* IDE/general purpose space */
-		.virtual	= CMX270_IDE104_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IDE104_PHYS),
-		.length		= SZ_64M - SZ_8M,
-		.type		= MT_DEVICE
-	},
-	[1] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IT8152_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
+static void __init cmx270_init_2700G(void)
+{
+	platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /*
   Display definitions
   keep these for backwards compatibility, although symbolic names (as
@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
 */
 __setup("monitor=", cmx270_set_display);
 
+static void __init cmx270_init_display(void)
+{
+	set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cmx270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.init		= cmx270_ohci_init,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+	pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
 			   irq_handler_t cmx270_detect_int,
 			   void *data)
 {
 	int err;
 
-	/*
-	 * setup GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* SB-X270 uses GPIO105 as SD power enable */
-	pxa_gpio_mode(105 | GPIO_OUT);
+	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+	if (err) {
+		dev_warn(dev, "power gpio unavailable\n");
+		return err;
+	}
 
-	/* card detect IRQ on GPIO 83 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+	gpio_direction_output(GPIO105_MMC_POWER, 0);
 
 	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-		       " request MMC card detect IRQ\n");
+	if (err) {
+		gpio_free(GPIO105_MMC_POWER);
+		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+			" request MMC card detect IRQ\n");
+	}
 
 	return err;
 }
@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data *p_d = dev->platform_data;
 
 	if ((1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		GPCR(105) = GPIO_bit(105);
+		dev_dbg(dev, "power on\n");
+		gpio_set_value(GPIO105_MMC_POWER, 0);
 	} else {
-		GPSR(105) = GPIO_bit(105);
-		printk(KERN_DEBUG "%s: off\n", __func__);
+		gpio_set_value(GPIO105_MMC_POWER, 1);
+		dev_dbg(dev, "power off\n");
 	}
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CMX270_MMC_IRQ, data);
+	gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
 	.exit		= cmx270_mci_exit,
 };
 
+static void __init cmx270_init_mmc(void)
+{
+	pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
 static int __init cmx270_pm_init(void) { return 0; }
 #endif
 
-static void __init cmx270_init(void)
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
 {
-	cmx270_pm_init();
-
-	set_pxa_fb_info(cmx270_display);
-
-	/* register CM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&cmx270_mci_platform_data);
-	pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-	/* This enables the STUART */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+static void __init cmx270_init(void)
+{
+	cmx270_pm_init();
 
-	/* This enables the BTUART  */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+	cmx270_init_dm9000();
+	cmx270_init_rtc();
+	cmx270_init_display();
+	cmx270_init_mmc();
+	cmx270_init_ohci();
+	cmx270_init_ac97();
+	cmx270_init_touchscreen();
+	cmx270_init_leds();
+	cmx270_init_2700G();
 }
 
 static void __init cmx270_init_irq(void)
 {
 	pxa27x_init_irq();
 
+	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
 
-	cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+	[0] = { /* PCI bridge */
+		.virtual	= CMX270_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
 
-	/* Setup interrupt for dm9000 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-	set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 
-	/* Setup interrupt for 2700G */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-	set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+	it8152_base_address = CMX270_IT8152_VIRT;
 }
-
+#else
 static void __init cmx270_map_io(void)
 {
 	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 }
-
+#endif
 
 MACHINE_START(ARMCORE, "Compulab CM-x270")
 	.boot_params	= 0xa0000100,
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 574839d7c13..abce13c846c 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -21,16 +21,16 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/colibri.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b37671b7188..e703a8d209e 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,14 +35,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/corgi.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -465,6 +466,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
 	else
 		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
@@ -531,6 +533,7 @@ static void __init corgi_init(void)
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &corgi_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 9328df37afd..311baf149b0 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -20,12 +20,12 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e91c0f26c41..35bbfccd2df 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/corgi.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index eccc45d21f7..8e2f2215c4b 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -16,13 +16,13 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
 #include "sharpsl.h"
 
 static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index fb9ba1ab282..6f5569bac13 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -37,9 +37,9 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a6f2390ce66..35736fc0863 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,17 +4,19 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/camera.h>
-#include <asm/arch/audio.h>
+#include <mach/gpio.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/camera.h>
+#include <mach/audio.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -830,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+	[0] = {
+		.start	= 0x43100000,
+		.end	= 0x43100053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NAND,
+		.end	= IRQ_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for Data DMA */
+		.start	= 97,
+		.end	= 97,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for Command DMA */
+		.start	= 99,
+		.end	= 99,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+	.name		= "pxa3xx-nand",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa3xx_nand_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
+	.resource	= pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_alloc("pxa2xx-spi", id);
+	if (pd == NULL) {
+		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+		       id);
+		return;
+	}
+
+	pd->dev.platform_data = info;
+	platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index b852eb18daa..887c738f591 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -31,4 +31,6 @@ extern struct platform_device pxa25x_device_pwm1;
 extern struct platform_device pxa27x_device_pwm0;
 extern struct platform_device pxa27x_device_pwm1;
 
+extern struct platform_device pxa3xx_device_nand;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 3215316d7b0..c0be17e0ab8 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -20,10 +20,10 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
new file mode 100644
index 00000000000..263884165f5
--- /dev/null
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -0,0 +1,56 @@
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+	if (!machine_is_e400())
+		return -ENODEV;
+
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
new file mode 100644
index 00000000000..26bd599af17
--- /dev/null
+++ b/arch/arm/mach-pxa/e740_lcd.c
@@ -0,0 +1,123 @@
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+	int ret;
+
+	if (!machine_is_e740())
+		return -ENODEV;
+
+	return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
new file mode 100644
index 00000000000..75edc3b5390
--- /dev/null
+++ b/arch/arm/mach-pxa/e750_lcd.c
@@ -0,0 +1,109 @@
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+	if (!machine_is_e750())
+		return -ENODEV;
+
+	return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
new file mode 100644
index 00000000000..e6aeab0ebc2
--- /dev/null
+++ b/arch/arm/mach-pxa/e800_lcd.c
@@ -0,0 +1,159 @@
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+		.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+	if (!machine_is_e800())
+		return -ENODEV;
+
+	return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1bf68074992..7a0a681a584 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD		(105)
-#define EM_X270_ETHIRQ		IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ		IRQ_GPIO(13)
+#define GPIO41_ETHIRQ		(41)
+#define GPIO13_MMC_CD		(13)
+#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS	(11)
+#define GPIO56_NAND_RB	(56)
+
+static unsigned long em_x270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* QCI */
+	GPIO84_CIF_FV,
+	GPIO25_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO22_KP_MKOUT_7,
+
+	/* SSP1 */
+	GPIO26_SSP1_RXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO57_SSP1_TXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* power controls */
+	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO41_GPIO,	/* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
 		.start = PXA_CS2_PHYS,
 		.end   = PXA_CS2_PHYS + 3,
@@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9k_resource),
-	.resource	= em_x270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
+	.resource	= em_x270_dm9000_resource,
 	.dev		= {
-		.platform_data = &em_x270_dm9k_platdata,
+		.platform_data = &em_x270_dm9000_platdata,
 	}
 };
 
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-	.name		= "wm97xx-ts",
-	.id		= -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+	platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
 	[0] = {
 		.start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
 	}
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS	(11)
-#define GPIO_NAND_RB	(56)
+static void __init em_x270_init_rtc(void)
+{
+	platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-	GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
 	dsb();
 
-	GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+	return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
 	}
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&em_x270_dm9k,
-	&em_x270_ts,
-	&em_x270_rtc,
-	&em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+	int err;
 
+	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		return;
+	}
+
+	gpio_direction_output(GPIO11_NAND_CS, 1);
+
+	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		gpio_free(GPIO11_NAND_CS);
+		return;
+	}
+
+	gpio_direction_input(GPIO56_NAND_RB);
+
+	platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.init		= em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err;
-
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* EM-X270 uses GPIO13 as SD power enable */
-	pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-	err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			      "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
 		       __func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	free_irq(EM_X270_MMC_IRQ, data);
+	int irq = gpio_to_irq(GPIO13_MMC_CD);
+	free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.exit		= em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+	pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
 	.pixclock	= 50000,
 	.bpp		= 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
 	.modes		= &em_x270_lcd_mode,
 	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lccr0		= LCCR0_PAS,
-	.lccr3		= LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-	/* setup LCD */
 	set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
 
-	/* register EM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 3,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= em_x270_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+	pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
 
-	/* setup STUART GPIOs */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "sleep/wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_PWR,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
 
-	/* setup BTUART GPIOs */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
 
-	/* Setup interrupt for dm9000 */
-	set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &em_x270_gpio_keys_data,
+	},
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+	platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+	em_x270_init_dm9000();
+	em_x270_init_rtc();
+	em_x270_init_nand();
+	em_x270_init_lcd();
+	em_x270_init_mmc();
+	em_x270_init_ohci();
+	em_x270_init_keypad();
+	em_x270_init_gpio_keys();
+	em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93c876..001a252bd51 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -10,18 +10,78 @@
  *
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include "generic.h"
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
-                      struct tag *tags, char **cmdline, struct meminfo *mi)
+	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
@@ -32,70 +92,95 @@ static void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+}
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+}
+
 /* e-series machine definitions */
 
 #ifdef CONFIG_MACH_E330
 MACHINE_START(E330, "Toshiba e330")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E750
 MACHINE_START(E750, "Toshiba e750")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E400
 MACHINE_START(E400, "Toshiba e400")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E800
 MACHINE_START(E800, "Toshiba e800")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
new file mode 100644
index 00000000000..d622c04c0d4
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -0,0 +1,57 @@
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <mach/udc.h>
+#include <mach/eseries-gpio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+	if (machine_is_e330() || machine_is_e350() ||
+	    machine_is_e740() || machine_is_e750() ||
+	    machine_is_e400())
+		pxa_set_udc_info(&e7xx_udc_mach_info);
+	else if (machine_is_e800())
+		pxa_set_udc_info(&e800_udc_mach_info);
+
+	return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 00000000000..cc3d850cc0b
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &ezx_backlight_data,
+	},
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+	.pixclock		= 150000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+	.modes		= &mode_ezx_old,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+	.pixclock		= 192308,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 32,
+	.depth			= 18,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+	.modes		= &mode_72r89803y01,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+	/* PWM backlight */
+	GPIO16_PWM0_OUT,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* For A780 support (connected with Neptune GSM chip) */
+	GPIO30_USB_P3_2,	/* ICL_TXENB */
+	GPIO31_USB_P3_6,	/* ICL_VPOUT */
+	GPIO90_USB_P3_5,	/* ICL_VPIN */
+	GPIO91_USB_P3_1,	/* ICL_XRXD */
+	GPIO56_USB_P3_4,	/* ICL_VMOUT */
+	GPIO113_USB_P3_3,	/* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa_set_i2c_info(NULL);
+	if (machine_is_ezx_a780() || machine_is_ezx_e680())
+		set_pxa_fb_info(&ezx_fb_info_1);
+	else
+		set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+		char **cmdline, struct meminfo *mi)
+{
+	/* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+	 * 16MB one at 0xAC000000
+	 */
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (32*1024*1024);
+	mi->bank[1].start = 0xac000000;
+	mi->bank[1].node = 1;
+	mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ca053226fba..ceaed007636 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,15 +20,25 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 
+void clear_reset_status(unsigned int mask)
+{
+	if (cpu_is_pxa2xx())
+		pxa2xx_clear_reset_status(mask);
+
+	if (cpu_is_pxa3xx())
+		pxa3xx_clear_reset_status(mask);
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 5bb7ae75783..041c048320e 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -47,12 +47,20 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void);
 #define pxa27x_get_memclk_frequency_10khz()	(0)
 #endif
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
 extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
 #define pxa3xx_get_memclk_frequency_10khz()	(0)
+static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
 extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 7d3e16970be..07acc1b2385 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/sysdev.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index bdf23975403..c0092472fa5 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -34,13 +34,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/gumstix.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/gumstix.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 2637633f916..5aa0270d560 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -25,18 +25,18 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/idp.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/idp.h>
+#include <mach/pxafb.h>
+#include <mach/bitfield.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
new file mode 100644
index 00000000000..5d8cc1d9cb1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/akita.h
@@ -0,0 +1,32 @@
+/*
+ * Hardware specific definitions for SL-C1000 (Akita)
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/* Akita IO Expander GPIOs */
+
+#define AKITA_IOEXP_RESERVED_7      (1 << 7)
+#define AKITA_IOEXP_IR_ON           (1 << 6)
+#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
+#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
+#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
+#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
+#define AKITA_IOEXP_RESERVED_1      (1 << 1)
+#define AKITA_IOEXP_RESERVED_0      (1 << 0)
+
+/* Direction Bitfield  0=output  1=input */
+#define AKITA_IOEXP_IO_DIR	0
+/* Default Values */
+#define AKITA_IOEXP_IO_OUT	(AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
+
+extern struct platform_device akitaioexp_device;
+
+void akita_set_ioexp(struct device *dev, unsigned char bitmask);
+void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
+
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
new file mode 100644
index 00000000000..f82f96dd105
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_ARCH_AUDIO_H__
+#define __ASM_ARCH_AUDIO_H__
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+typedef struct {
+	int (*startup)(struct snd_pcm_substream *, void *);
+	void (*shutdown)(struct snd_pcm_substream *, void *);
+	void (*suspend)(void *);
+	void (*resume)(void *);
+	void *priv;
+} pxa2xx_audio_ops_t;
+
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
new file mode 100644
index 00000000000..f1f0e3387d9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ *	FILE    	bitfield.h
+ *
+ *	Version 	1.1
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	April 1998 (April 1997)
+ *	System  	Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size      	Size of the bit field, in number of bits.
+ *    Shft      	Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld       	Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize     	Size of the bit field, in number of bits.
+ *    FShft     	Shift value of the bit field with respect to bit 0.
+ *    FMsk      	Mask for the bit field.
+ *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
+ *    F1stBit   	First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value     	Bit-field value.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt    	Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+                	(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data      	Data containing the bit-field to be extracted.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr     	Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
new file mode 100644
index 00000000000..39516ced8b1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -0,0 +1,48 @@
+/*
+    camera.h - PXA camera driver header file
+
+    Copyright (C) 2003, Intel Corporation
+    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER	1
+#define PXA_CAMERA_DATAWIDTH_4	2
+#define PXA_CAMERA_DATAWIDTH_5	4
+#define PXA_CAMERA_DATAWIDTH_8	8
+#define PXA_CAMERA_DATAWIDTH_9	0x10
+#define PXA_CAMERA_DATAWIDTH_10	0x20
+#define PXA_CAMERA_PCLK_EN	0x40
+#define PXA_CAMERA_MCLK_EN	0x80
+#define PXA_CAMERA_PCP		0x100
+#define PXA_CAMERA_HSP		0x200
+#define PXA_CAMERA_VSP		0x400
+
+struct pxacamera_platform_data {
+	int (*init)(struct device *);
+	int (*power)(struct device *, int);
+	int (*reset)(struct device *, int);
+
+	unsigned long flags;
+	unsigned long mclk_10khz;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
new file mode 100644
index 00000000000..2ae373fb567
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -0,0 +1,19 @@
+#ifndef _COLIBRI_H_
+#define _COLIBRI_H_
+
+/* physical memory regions */
+#define COLIBRI_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define COLIBRI_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
+
+/* virtual memory regions */
+#define COLIBRI_DISK_VIRT	0xF0000000	/* Disk On Chip region */
+
+/* size of flash */
+#define COLIBRI_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000		114
+#define COLIBRI_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+
+#endif /* _COLIBRI_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
new file mode 100644
index 00000000000..bf856503baf
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -0,0 +1,109 @@
+/*
+ * Hardware specific definitions for SL-C7xx series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_CORGI_H
+#define __ASM_ARCH_CORGI_H  1
+
+
+/*
+ * Corgi (Non Standard) GPIO Definitions
+ */
+#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
+#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
+#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
+#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
+#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
+#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
+#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
+#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
+#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
+#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
+#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
+#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
+#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
+#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
+#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
+#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
+#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
+#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transciever */
+#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
+#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
+#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
+#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
+#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
+#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
+#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
+
+
+/*
+ * Corgi Keyboard Definitions
+ */
+#define CORGI_KEY_STROBE_NUM		(12)
+#define CORGI_KEY_SENSE_NUM			(8)
+#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
+#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
+#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
+#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
+#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
+#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
+#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
+#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
+#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
+#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
+#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
+#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
+
+
+/*
+ * Corgi Interrupts
+ */
+#define CORGI_IRQ_GPIO_KEY_INT		IRQ_GPIO(0)
+#define CORGI_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define CORGI_IRQ_GPIO_WAKEUP		IRQ_GPIO(3)
+#define CORGI_IRQ_GPIO_AK_INT		IRQ_GPIO(4)
+#define CORGI_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define CORGI_IRQ_GPIO_nSD_INT		IRQ_GPIO(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(11)
+#define CORGI_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL	IRQ_GPIO(16)	/* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a)	IRQ_GPIO(58+(a))	/* Keyboard Sense lines */
+
+
+/*
+ * Corgi SCOOP GPIOs and Config
+ */
+#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
+#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
+#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
+#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
+#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
+#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
+#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
+#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
+#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
+
+#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
+			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
+			CORGI_SCP_MIC_BIAS )
+#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
+
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device corgiscoop_device;
+extern struct platform_device corgissp_device;
+
+#endif /* __ASM_ARCH_CORGI_H  */
+
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
new file mode 100644
index 00000000000..55d6a175ab1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-pxa/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x40000000		@ physical
+		movne	\rx, #io_p2v(0x40000000)	@ virtual
+		orr	\rx, \rx, #0x00100000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
new file mode 100644
index 00000000000..955bfe60606
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/dma.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
+#endif
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int num_ch);
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
new file mode 100644
index 00000000000..de16c12d523
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-pxa/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PXA-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
+		mov	\tmp, \tmp, lsr #13
+		and	\tmp, \tmp, #0x7		@ Core G
+		cmp	\tmp, #1
+		bhi	1004f
+
+		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
+		add	\base, \base, #0x00d00000
+		ldr	\irqstat, [\base, #0]		@ ICIP
+		ldr	\irqnr, [\base, #4]		@ ICMR
+		b	1002f
+
+1004:
+		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
+		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1003f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+		add	\irqnr, \irqnr, #32
+		b	1001f
+1003:
+		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
+		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
+1002:
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1001f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+1001:
+		.endm
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
new file mode 100644
index 00000000000..4c90b131027
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -0,0 +1,50 @@
+/*
+ *  eseries-gpio.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+/* e-series power button */
+#define GPIO_ESERIES_POWERBTN     0
+
+/* UDC GPIO definitions */
+#define GPIO_E7XX_USB_DISC       13
+#define GPIO_E7XX_USB_PULLUP      3
+
+#define GPIO_E800_USB_DISC        4
+#define GPIO_E800_USB_PULLUP     84
+
+/* e740 PCMCIA GPIO definitions */
+/* Note: PWR1 seems to be inverted */
+#define GPIO_E740_PCMCIA_CD0      8
+#define GPIO_E740_PCMCIA_CD1     44
+#define GPIO_E740_PCMCIA_RDY0    11
+#define GPIO_E740_PCMCIA_RDY1     6
+#define GPIO_E740_PCMCIA_RST0    27
+#define GPIO_E740_PCMCIA_RST1    24
+#define GPIO_E740_PCMCIA_PWR0    20
+#define GPIO_E740_PCMCIA_PWR1    23
+
+/* e750 PCMCIA GPIO definitions */
+#define GPIO_E750_PCMCIA_CD0      8
+#define GPIO_E750_PCMCIA_RDY0    12
+#define GPIO_E750_PCMCIA_RST0    27
+#define GPIO_E750_PCMCIA_PWR0    20
+
+/* e800 PCMCIA GPIO definitions */
+#define GPIO_E800_PCMCIA_RST0    69
+#define GPIO_E800_PCMCIA_RST1    72
+#define GPIO_E800_PCMCIA_PWR0    20
+#define GPIO_E800_PCMCIA_PWR1    73
+
+/* e7xx IrDA power control */
+#define GPIO_E7XX_IR_ON          38
+
+/* ASIC related GPIOs */
+#define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
new file mode 100644
index 00000000000..f2a93d5e31d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
@@ -0,0 +1,27 @@
+/*
+ *  eseries-irq.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
+#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
+
+#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
+#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
+#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
+#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
+#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
+#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
+
+#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
+#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
+
+#define TMIO_SD_IRQ     IRQ_TMIO(1)
+#define TMIO_USB_IRQ    IRQ_TMIO(2)
+
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
new file mode 100644
index 00000000000..2c538d8c362
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gpio.h
+ *
+ * PXA GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_PXA_GPIO_H
+#define __ASM_ARCH_PXA_GPIO_H
+
+#include <mach/pxa-regs.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <asm-generic/gpio.h>
+
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space.
+ */
+#define NR_BUILTIN_GPIO 128
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+		return GPLR(gpio) & GPIO_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+		if (value)
+			GPSR(gpio) = GPIO_bit(gpio);
+		else
+			GPCR(gpio) = GPIO_bit(gpio);
+	} else {
+		__gpio_set_value(gpio, value);
+	}
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
+#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
new file mode 100644
index 00000000000..42ee1956750
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -0,0 +1,96 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET          7
+#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the original gumstix,
+this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#ifdef CONFIG_ARCH_GUMSTIX_ORIG
+
+#define GPIO_GUMSTIX_USB_GPIOn		81
+#define GPIO_GUMSTIX_USB_GPIOx		83
+
+#else
+
+#define GPIO_GUMSTIX_USB_GPIOn		35
+#define GPIO_GUMSTIX_USB_GPIOx		41
+
+#endif
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST		80
+#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST		52
+#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0		36
+#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1		27
+#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET			8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1			4
+#define GPIO4_nSTSCHG			GPIO4_nBVD1
+#define GPIO11_nCD			11
+#define GPIO26_PRDY_nBSY		26
+#define GUMSTIX_S0_nSTSCHG_IRQ		IRQ_GPIO(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ		IRQ_GPIO(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1			18
+#define GPIO18_nSTSCHG			GPIO18_nBVD1
+#define GPIO36_nCD			36
+#define GPIO27_PRDY_nBSY		27
+#define GUMSTIX_S1_nSTSCHG_IRQ		IRQ_GPIO(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ		IRQ_GPIO(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 00000000000..e89df4d0d23
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,235 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/hardware.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE		0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xff000000
+#define UNCACHED_ADDR		UNCACHED_PHYS_0
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)	\
+	(*(volatile u32 *)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PXA25x
+#define __cpu_is_pxa21x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xf3f;	\
+		_id == 0x212;				\
+	})
+
+#define __cpu_is_pxa255(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;   \
+		_id == 0x2d0;                           \
+	 })
+
+#define __cpu_is_pxa25x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x2d0 || _id == 0x290;		\
+	})
+#else
+#define __cpu_is_pxa21x(id)	(0)
+#define __cpu_is_pxa255(id)	(0)
+#define __cpu_is_pxa25x(id)	(0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#define __cpu_is_pxa27x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x411;				\
+	})
+#else
+#define __cpu_is_pxa27x(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x688;				\
+	 })
+#else
+#define __cpu_is_pxa300(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x689;				\
+	 })
+#else
+#define __cpu_is_pxa310(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x603 || _id == 0x682;		\
+	 })
+#else
+#define __cpu_is_pxa320(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x683;		\
+	 })
+#else
+#define __cpu_is_pxa930(id)	(0)
+#endif
+
+#define cpu_is_pxa21x()					\
+	({						\
+		__cpu_is_pxa21x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa255()                                 \
+	({                                              \
+		__cpu_is_pxa255(read_cpuid_id());       \
+	})
+
+#define cpu_is_pxa25x()					\
+	({						\
+		__cpu_is_pxa25x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa27x()					\
+	({						\
+		__cpu_is_pxa27x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa300()					\
+	({						\
+		__cpu_is_pxa300(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa310()					\
+	({						\
+		__cpu_is_pxa310(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa320()					\
+	({						\
+		__cpu_is_pxa320(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa930()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa930(id);			\
+	 })
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ * == 0x3 for pxa300/pxa310/pxa320
+ */
+#define __cpu_is_pxa2xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id <= 0x2;				\
+	 })
+
+#define __cpu_is_pxa3xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id == 0x3;				\
+	 })
+
+#define cpu_is_pxa2xx()					\
+	({						\
+		__cpu_is_pxa2xx(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa3xx()					\
+	({						\
+		__cpu_is_pxa3xx(read_cpuid_id());	\
+	 })
+
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
+/*
+ * Return GPIO level, nonzero means high, zero is low
+ */
+extern int pxa_gpio_get_value(unsigned gpio);
+
+/*
+ * Set output GPIO level
+ */
+extern void pxa_gpio_set_value(unsigned gpio, int value);
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+
+#endif
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+#define pcibios_assign_all_busses()	1
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
new file mode 100644
index 00000000000..80596b01344
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -0,0 +1,77 @@
+/*
+ *  i2c_pxa.h
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef _I2C_PXA_H_
+#define _I2C_PXA_H_
+
+#if 0
+#define DEF_TIMEOUT             3
+#else
+/* need a longer timeout if we're dealing with the fact we may well be
+ * looking at a multi-master environment
+*/
+#define DEF_TIMEOUT             32
+#endif
+
+#define BUS_ERROR               (-EREMOTEIO)
+#define XFER_NAKED              (-ECONNREFUSED)
+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
+
+/* ICR initialize bit values
+*
+*  15. FM       0 (100 Khz operation)
+*  14. UR       0 (No unit reset)
+*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
+*                                       matching its slave address)
+*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
+*                                       in master mode)
+*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
+*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
+*  9.  IRFIE    1 (Enable interrupts from full buffer received)
+*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
+*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
+*  6.  IUE      0 (Disable unit until we change settings)
+*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
+*  4.  MA       0 (Only send stop with the ICR stop bit)
+*  3.  TB       0 (We are not transmitting a byte initially)
+*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
+*  1.  STOP     0 (Do not send a STOP)
+*  0.  START    0 (Do not send a START)
+*
+*/
+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+
+/* I2C status register init values
+ *
+ * 10. BED      1 (Clear bus error detected)
+ * 9.  SAD      1 (Clear slave address detected)
+ * 7.  IRF      1 (Clear IDBR Receive Full)
+ * 6.  ITE      1 (Clear IDBR Transmit Empty)
+ * 5.  ALD      1 (Clear Arbitration Loss Detected)
+ * 4.  SSD      1 (Clear Slave Stop Detected)
+ */
+#define I2C_ISR_INIT	0x7FF  /* status register init */
+
+struct i2c_slave_client;
+
+struct i2c_pxa_platform_data {
+	unsigned int		slave_addr;
+	struct i2c_slave_client	*slave;
+	unsigned int		class;
+	int			use_pio;
+};
+
+extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+
+#ifdef CONFIG_PXA27x
+extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
new file mode 100644
index 00000000000..5eff96fcc94
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -0,0 +1,199 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ *             Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ *             <http://www.vibren.com> <http://bec-systems.com>
+ *             Changes for 2.6 kernel.
+ */
+
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+
+#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
+#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT	(0xf0000000)
+#define IDP_COREVOLT_SIZE	(1*1024*1024)
+
+#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE		(1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+#  define __CPLD_REG(x)		CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0	(1 << 0)
+#define PCC0_PWR1	(1 << 1)
+#define PCC0_PWR2	(1 << 2)
+#define PCC0_PWR3	(1 << 3)
+#define PCC1_PWR0	(1 << 4)
+#define PCC1_PWR1	(1 << 5)
+#define PCC1_PWR2	(1 << 6)
+#define PCC1_PWR3	(1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET	(1 << 6)
+#define PCC1_RESET	(1 << 7)
+#define PCC0_ENABLE	(1 << 0)
+#define PCC1_ENABLE	(1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
+#define _PCC_RESET	(1 << 6)
+#define _PCC_IRQ	(1 << 5)
+#define _PCC_INPACK	(1 << 4)
+#define PCC_BVD2	(1 << 3)
+#define PCC_BVD1	(1 << 2)
+#define PCC_VS2		(1 << 1)
+#define PCC_VS1		(1 << 0)
+
+#define PCC_DETECT(x)	(GPLR(7 + (x)) & GPIO_bit(7 + (x)))
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
+#define IDE_IRQ				IRQ_GPIO(21)
+
+#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
+
+#define ETHERNET_IRQ			IRQ_GPIO(4)
+#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
+
+#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
+
+#define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
+#define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED	(1<<5)
+#define IDP_BUSY_LED	(1<<6)
+
+#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS	7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US			100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+	IDP_CPLD_KB_COL_LOW = outputs;\
+	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 00000000000..600fd4f7660
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
new file mode 100644
index 00000000000..0a50c3c763d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irda.h
@@ -0,0 +1,23 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF		1
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+
+struct pxaficp_platform_data {
+	int transceiver_cap;
+	void (*transceiver_mode)(struct device *dev, int mode);
+	int (*startup)(struct device *dev);
+	void (*shutdown)(struct device *dev);
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
new file mode 100644
index 00000000000..108b5db9b2a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -0,0 +1,265 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/irqs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define PXA_IRQ(x)	(x)
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
+#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
+#endif
+
+#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
+#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
+#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
+#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
+#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
+#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
+#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
+#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
+#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
+#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
+#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
+#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
+#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
+#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
+#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
+#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
+#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
+#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
+#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
+#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
+#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
+#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
+#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
+#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
+#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
+#endif
+
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
+#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
+#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
+#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
+#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
+#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
+#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
+#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	(64)
+#define PXA_GPIO_IRQ_NUM	(128)
+
+#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
+#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
+#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#elif defined(CONFIG_ARCH_LUBBOCK) || \
+      defined(CONFIG_MACH_LOGICPD_PXA270) || \
+      defined(CONFIG_MACH_TOSA) || \
+      defined(CONFIG_MACH_MAINSTONE) || \
+      defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_ARCH_PXA_ESERIES) || \
+      defined(CONFIG_MACH_MAGICIAN)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define NR_IRQS			(IRQ_BOARD_START + 32)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
+#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ		LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
+#define LPD270_AC97_IRQ		LPD270_IRQ(4)
+
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#if NR_IRQS < (IT8152_LAST_IRQ+1)
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif
+
+#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
new file mode 100644
index 00000000000..79d209b826f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define LITTLETON_ETH_PHYS	0x30000000
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
new file mode 100644
index 00000000000..f89fb715266
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lpd270.h
+ *
+ * Author:	Lennert Buytenhek
+ * Created:	Feb 10, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_LPD270_H
+#define __ASM_ARCH_LPD270_H
+
+#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
+#define LPD270_CPLD_VIRT	0xf0000000
+#define LPD270_CPLD_SIZE	0x00100000
+
+#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
+
+/* CPLD registers  */
+#define LPD270_CPLD_REG(x)	((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
+#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
+#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
+#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
+#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
+#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
+#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
+#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
+#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
+
+#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
+#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
+#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
new file mode 100644
index 00000000000..4cb24154a5a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/lubbock.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
+
+#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
+#define LUBBOCK_FPGA_VIRT	(0xf0000000)
+#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
+#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
+#else
+#  define __LUB_REG(x)		LUB_P2V(x)
+#endif
+
+/* FPGA register virtual addresses */
+#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
+#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
+#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
+#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
+#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
+#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
+#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
+#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
new file mode 100644
index 00000000000..38d68d99f58
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -0,0 +1,117 @@
+/*
+ * GPIO and IRQ definitions for HTC Magician PDA phones
+ *
+ * Copyright (c) 2007 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MAGICIAN_H_
+#define _MAGICIAN_H_
+
+#include <mach/irqs.h>
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER		0
+#define GPIO9_MAGICIAN_UNKNOWN			9
+#define GPIO10_MAGICIAN_GSM_IRQ			10
+#define GPIO11_MAGICIAN_GSM_OUT1		11
+#define GPIO13_MAGICIAN_CPLD_IRQ		13
+#define GPIO18_MAGICIAN_UNKNOWN			18
+#define GPIO22_MAGICIAN_VIBRA_EN		22
+#define GPIO26_MAGICIAN_GSM_POWER		26
+#define GPIO27_MAGICIAN_USBC_PUEN		27
+#define GPIO30_MAGICIAN_nCHARGE_EN		30
+#define GPIO37_MAGICIAN_KEY_HANGUP		37
+#define GPIO38_MAGICIAN_KEY_CONTACTS		38
+#define GPIO40_MAGICIAN_GSM_OUT2		40
+#define GPIO48_MAGICIAN_UNKNOWN			48
+#define GPIO56_MAGICIAN_UNKNOWN			56
+#define GPIO57_MAGICIAN_CAM_RESET		57
+#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
+#define GPIO83_MAGICIAN_nIR_EN			83
+#define GPIO86_MAGICIAN_GSM_RESET		86
+#define GPIO87_MAGICIAN_GSM_SELECT		87
+#define GPIO90_MAGICIAN_KEY_CALENDAR		90
+#define GPIO91_MAGICIAN_KEY_CAMERA		91
+#define GPIO93_MAGICIAN_KEY_UP			93
+#define GPIO94_MAGICIAN_KEY_DOWN		94
+#define GPIO95_MAGICIAN_KEY_LEFT		95
+#define GPIO96_MAGICIAN_KEY_RIGHT		96
+#define GPIO97_MAGICIAN_KEY_ENTER		97
+#define GPIO98_MAGICIAN_KEY_RECORD		98
+#define GPIO99_MAGICIAN_HEADPHONE_IN		99
+#define GPIO100_MAGICIAN_KEY_VOL_UP		100
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
+#define GPIO102_MAGICIAN_KEY_PHONE		102
+#define GPIO103_MAGICIAN_LED_KP			103
+#define GPIO104_MAGICIAN_LCD_POWER_1 		104
+#define GPIO105_MAGICIAN_LCD_POWER_2		105
+#define GPIO106_MAGICIAN_LCD_POWER_3		106
+#define GPIO107_MAGICIAN_DS1WM_IRQ		107
+#define GPIO108_MAGICIAN_GSM_READY		108
+#define GPIO114_MAGICIAN_UNKNOWN		114
+#define GPIO115_MAGICIAN_nPEN_IRQ		115
+#define GPIO116_MAGICIAN_nCAM_EN		116
+#define GPIO119_MAGICIAN_UNKNOWN		119
+#define GPIO120_MAGICIAN_UNKNOWN		120
+
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO(reg,bit) \
+	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_CHARGE_EN		MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
+#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
+
+#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
new file mode 100644
index 00000000000..3461c4302ff
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -0,0 +1,120 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/mainstone.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Nov 14, 2002
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_MAINSTONE_H
+#define ASM_ARCH_MAINSTONE_H
+
+#define MST_ETH_PHYS		PXA_CS4_PHYS
+
+#define MST_FPGA_PHYS		PXA_CS2_PHYS
+#define MST_FPGA_VIRT		(0xf0000000)
+#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
+#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
+#else
+# define __MST_REG(x)		MST_P2V(x)
+#endif
+
+/* board level registers in the FPGA */
+
+#define MST_LEDDAT1		__MST_REG(0x08000010)
+#define MST_LEDDAT2		__MST_REG(0x08000014)
+#define MST_LEDCTRL		__MST_REG(0x08000040)
+#define MST_GPSWR		__MST_REG(0x08000060)
+#define MST_MSCWR1		__MST_REG(0x08000080)
+#define MST_MSCWR2		__MST_REG(0x08000084)
+#define MST_MSCWR3		__MST_REG(0x08000088)
+#define MST_MSCRD		__MST_REG(0x08000090)
+#define MST_INTMSKENA		__MST_REG(0x080000c0)
+#define MST_INTSETCLR		__MST_REG(0x080000d0)
+#define MST_PCMCIA0		__MST_REG(0x080000e0)
+#define MST_PCMCIA1		__MST_REG(0x080000e4)
+
+#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
+#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
+#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
+#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
+#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
+#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
+#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
+#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
+#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
+
+#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
+#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
+#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
+#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
+#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
+
+#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
+#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
+#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
+#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
+#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
+
+#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
+#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
+#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
+#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
+#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
+#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
+#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
+
+#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
+#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
+#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
+
+#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
+#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
+#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
+#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
+#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
+#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
+#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
+#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
+#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
+#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
+
+#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
+#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
+#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
+#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
+#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
+#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
+#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
+#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
+#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
+#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
+#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
+#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
+#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
+#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
+
+#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
+#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
+#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
+#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
+#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
+#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
+#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
+#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
+
+#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
+#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
+#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
+#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
+#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
+#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
new file mode 100644
index 00000000000..552eb7fa657
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/memory.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * The nodes are matched with the physical SDRAM banks as follows:
+ *
+ * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
+ * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
+ * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
+ * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
+ *
+ * This needs a node mem size of 26 bits.
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+void cmx270_pci_adjust_zones(int node, unsigned long *size,
+			     unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	cmx270_pci_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
new file mode 100644
index 00000000000..6c8e72238bf
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -0,0 +1,161 @@
+#ifndef __ASM_ARCH_MFP_PXA25X_H
+#define __ASM_ARCH_MFP_PXA25X_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
+#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
+#define GPIO5_GPIO		MFP_CFG_IN(GPIO5, AF0)
+#define GPIO6_GPIO		MFP_CFG_IN(GPIO6, AF0)
+#define GPIO7_GPIO		MFP_CFG_IN(GPIO7, AF0)
+#define GPIO8_GPIO		MFP_CFG_IN(GPIO8, AF0)
+
+#define GPIO1_RST		MFP_CFG_IN(GPIO1, AF1)
+
+/* Crystal and Clock Signals */
+#define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO70_RTC_CLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
+#define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
+#define GPIO12_32KHz		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+#define GPIO72_32kHz		MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO19_DREQ_1		MFP_CFG_IN(GPIO19, AF1)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO13_MBGNT		MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
+#define GPIO73_MBGNT		MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
+#define GPIO14_MBREQ		MFP_CFG_IN(GPIO14, AF1)
+#define GPIO66_MBREQ		MFP_CFG_IN(GPIO66, AF1)
+
+/* PC CARD */
+#define GPIO52_nPCE_1		MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
+#define GPIO53_nPCE_2		MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO54_nPSKTSEL		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+
+/* FFUART */
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* HWUART */
+#define GPIO42_HWUART_RXD	MFP_CFG_IN(GPIO42, AF3)
+#define GPIO43_HWUART_TXD	MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
+#define GPIO44_HWUART_CTS	MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_HWUART_RTS	MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
+#define GPIO48_HWUART_TXD	MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
+#define GPIO49_HWUART_RXD	MFP_CFG_IN(GPIO49, AF1)
+#define GPIO50_HWUART_CTS	MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_HWUART_RTS	MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1 */
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO32_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO32, AF1)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO32_I2S_SYSCLK	MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+
+/* SSP 2 - NSSP */
+#define GPIO81_SSP2_CLK_OUT 	MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO81_SSP2_CLK_IN  	MFP_CFG_IN(GPIO81, AF1)
+#define GPIO82_SSP2_FRM_OUT 	MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
+#define GPIO82_SSP2_FRM_IN  	MFP_CFG_IN(GPIO82, AF1)
+#define GPIO83_SSP2_TXD      	MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
+#define GPIO83_SSP2_RXD      	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_SSP2_TXD      	MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
+#define GPIO84_SSP2_RXD      	MFP_CFG_IN(GPIO84, AF2)
+
+/* MMC */
+#define GPIO6_MMC_CLK		MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
+#define GPIO8_MMC_CS0		MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
+#define GPIO9_MMC_CS1		MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO34_MMC_CS0		MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
+#define GPIO39_MMC_CS1		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO53_MMC_CLK		MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_MMC_CLK		MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
+#define GPIO69_MMC_CLK		MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
+#define GPIO67_MMC_CS0		MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
+#define GPIO68_MMC_CS1		MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_ACBIAS	MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+
+#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
new file mode 100644
index 00000000000..122bdbd5318
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -0,0 +1,433 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE:  for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
new file mode 100644
index 00000000000..3e9211591e2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <mach/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ *  MFP_PIN(x)
+ *  MFP_AFx
+ *  MFP_LPM_DRIVE_{LOW, HIGH}
+ *  MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit     23 - Input/Output (PXA2xx specific)
+ * bit     24 - Wakeup Enable(PXA2xx specific)
+ */
+
+#define MFP_DIR_IN		(0x0 << 23)
+#define MFP_DIR_OUT		(0x1 << 23)
+#define MFP_DIR_MASK		(0x1 << 23)
+#define MFP_DIR(x)		(((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE:  pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
new file mode 100644
index 00000000000..bc1fb33a6e7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -0,0 +1,575 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
+#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
+#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
+#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
+#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
+#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
+#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
+#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
+#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
+#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
+#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
+#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
+#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
+#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
+#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
+#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
+#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
+#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
+#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
+#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
+#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
+#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
+#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
+#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
+#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
+#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
+#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
+#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
+#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
+#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
+#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
+#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
+#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
+#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
+#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
+#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
+#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
+#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
+#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
+#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
+#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
+#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
+#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
+#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
+#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
+#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
+#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
+#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
+#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
+#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
+#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
+#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
+#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
+#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
+#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
+#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
+#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
+#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
+#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
+#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
+#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
+#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
+#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
+#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
+#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
+#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
+#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
+#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
+#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
+#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
+#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
+#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
+#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
+#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
+#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
+#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
+#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
+#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
+#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
+#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
+#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
+#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
+#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
+#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
+#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
+#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
+#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
+#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
+#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
+#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
+#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
+#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
+#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
+#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
+#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
+#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
+#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
+#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
+#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
+#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
+#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
+#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
+#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
+#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
+#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
+#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
+#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
+#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
+#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
+#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
+#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
+#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
+#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
+#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
+#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
+#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
+#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
new file mode 100644
index 00000000000..74990510cf3
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK	MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM		MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK	MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM		MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+
+#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
new file mode 100644
index 00000000000..1f6b35c015d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
@@ -0,0 +1,252 @@
+#ifndef __ASM_ARCH_MFP_PXA3XX_H
+#define __ASM_ARCH_MFP_PXA3XX_H
+
+#define MFPR_BASE	(0x40e10000)
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* PXA3xx common MFP configurations - processor specific ones defined
+ * in mfp-pxa300.h and mfp-pxa320.h
+ */
+#define GPIO0_GPIO		MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO		MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO		MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO		MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO		MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO		MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO		MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO		MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO		MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO		MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO		MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO		MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO		MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO		MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO		MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO		MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO		MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO		MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO		MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO		MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO		MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO		MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO		MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO		MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO		MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO		MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO		MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO		MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO		MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
+
+#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
+
+#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
+
+#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
+
+#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO		MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO		MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO		MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO		MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO		MFP_CFG(GPIO127, AF0)
+
+#define GPIO0_2_GPIO		MFP_CFG(GPIO0_2, AF0)
+#define GPIO1_2_GPIO		MFP_CFG(GPIO1_2, AF0)
+#define GPIO2_2_GPIO		MFP_CFG(GPIO2_2, AF0)
+#define GPIO3_2_GPIO		MFP_CFG(GPIO3_2, AF0)
+#define GPIO4_2_GPIO		MFP_CFG(GPIO4_2, AF0)
+#define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
+#define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
+
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by pxa3xx_mfp_init_addr()
+ *
+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
+ * structure, which represents a range of MFP pins from "start" to
+ * "end", with the offset begining at "offset", to define a single
+ * pin, let "end" = -1
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct pxa3xx_mfp_addr_map {
+	unsigned int	start;
+	unsigned int	end;
+	unsigned long	offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+	{ MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+	{ MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
+
+/*
+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
+ * to the MFPR register
+ */
+unsigned long pxa3xx_mfp_read(int mfp);
+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
+
+/*
+ * pxa3xx_mfp_config - configure the MFPR registers
+ *
+ * used by board specific initialization code
+ */
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
+
+/*
+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
+ * index and MFPR register offset
+ *
+ * used by processor specific code
+ */
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
+void __init pxa3xx_init_mfp(void);
+#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
new file mode 100644
index 00000000000..fabd9b4df82
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -0,0 +1,491 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+
+/* Chip Select */
+#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
new file mode 100644
index 00000000000..8769567b389
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#define mfp_to_gpio(m)	((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 3mA (MFP_DS03X)
+ * 		  low power mode = default
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)		((x) & 0x3ff)
+
+#define MFP_AF0			(0x0 << 10)
+#define MFP_AF1			(0x1 << 10)
+#define MFP_AF2			(0x2 << 10)
+#define MFP_AF3			(0x3 << 10)
+#define MFP_AF4			(0x4 << 10)
+#define MFP_AF5			(0x5 << 10)
+#define MFP_AF6			(0x6 << 10)
+#define MFP_AF7			(0x7 << 10)
+#define MFP_AF_MASK		(0x7 << 10)
+#define MFP_AF(x)		(((x) >> 10) & 0x7)
+
+#define MFP_DS01X		(0x0 << 13)
+#define MFP_DS02X		(0x1 << 13)
+#define MFP_DS03X		(0x2 << 13)
+#define MFP_DS04X		(0x3 << 13)
+#define MFP_DS06X		(0x4 << 13)
+#define MFP_DS08X		(0x5 << 13)
+#define MFP_DS10X		(0x6 << 13)
+#define MFP_DS13X		(0x7 << 13)
+#define MFP_DS_MASK		(0x7 << 13)
+#define MFP_DS(x)		(((x) >> 13) & 0x7)
+
+#define MFP_LPM_INPUT		(0x0 << 16)
+#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
+#define MFP_LPM_PULL_LOW	(0x3 << 16)
+#define MFP_LPM_PULL_HIGH	(0x4 << 16)
+#define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_STATE_MASK	(0x7 << 16)
+#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE	(0x0 << 19)
+#define MFP_LPM_EDGE_RISE	(0x1 << 19)
+#define MFP_LPM_EDGE_FALL	(0x2 << 19)
+#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
+#define MFP_LPM_EDGE_MASK	(0x3 << 19)
+#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE		(0x0 << 21)
+#define MFP_PULL_LOW		(0x1 << 21)
+#define MFP_PULL_HIGH		(0x2 << 21)
+#define MFP_PULL_BOTH		(0x3 << 21)
+#define MFP_PULL_MASK		(0x3 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
new file mode 100644
index 00000000000..6d1304c9270
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -0,0 +1,23 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+struct pxamci_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	unsigned long detect_delay;		/* delay in jiffies before detecting cards after interrupt */
+	int (*init)(struct device *, irq_handler_t , void *);
+	int (*get_ro)(struct device *);
+	void (*setpower)(struct device *, unsigned int);
+	void (*exit)(struct device *, void *);
+};
+
+extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
new file mode 100644
index 00000000000..4d452fcb150
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -0,0 +1,35 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_PXA_MTD_XIP_H__
+#define __ARCH_PXA_MTD_XIP_H__
+
+#include <mach/pxa-regs.h>
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+
+#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
new file mode 100644
index 00000000000..e848a47128c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
@@ -0,0 +1,20 @@
+#ifndef ASMARM_ARCH_OHCI_H
+#define ASMARM_ARCH_OHCI_H
+
+struct device;
+
+struct pxaohci_platform_data {
+	int (*init)(struct device *);
+	void (*exit)(struct device *);
+
+	int port_mode;
+#define PMM_NPS_MODE           1
+#define PMM_GLOBAL_MODE        2
+#define PMM_PERPORT_MODE       3
+
+	int power_budget;
+};
+
+extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
new file mode 100644
index 00000000000..1e8bccbda51
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -0,0 +1,106 @@
+/*
+ * GPIOs and interrupts for Palm T|X Handheld Computer
+ *
+ * Based on palmld-gpio.h by Alex Osborne
+ *
+ * Authors:	Marek Vasut <marek.vasut@gmail.com>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTX_H_
+#define _INCLUDE_PALMTX_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTX_GPIO_RESET		1
+
+#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
+#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
+#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
+
+/* SD/MMC */
+#define GPIO_NR_PALMTX_SD_DETECT_N		14
+#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
+#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMTX_WM9712_IRQ		27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTX_IR_DISABLE		40
+
+/* USB */
+#define GPIO_NR_PALMTX_USB_DETECT_N		13
+#define GPIO_NR_PALMTX_USB_POWER		95
+#define GPIO_NR_PALMTX_USB_PULLUP		93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTX_BL_POWER			84
+#define GPIO_NR_PALMTX_LCD_POWER		96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMTX_BORDER_SWITCH		98
+#define GPIO_NR_PALMTX_BORDER_SELECT		22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMTX_BT_POWER			17
+#define GPIO_NR_PALMTX_BT_RESET			83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
+#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
+#define GPIO_NR_PALMTX_PCMCIA_RESET		79
+#define GPIO_NR_PALMTX_PCMCIA_READY		116
+
+/* NAND Flash ... this GPIO may be incorrect! */
+#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMTX_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses  */
+#define PALMTX_PCMCIA_PHYS	0x28000000
+#define PALMTX_PCMCIA_VIRT	0xf0000000
+#define PALMTX_PCMCIA_SIZE	0x100000
+
+#define PALMTX_PHYS_RAM_START	0xa0000000
+#define PALMTX_PHYS_IO_START	0x40000000
+
+#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
+#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME			21
+
+
+/* BATTERY */
+#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMTX_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
+
+#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTX_MAX_INTENSITY		0xFE
+#define PALMTX_DEFAULT_INTENSITY	0x7E
+#define PALMTX_LIMIT_MASK		0x7F
+#define PALMTX_PRESCALER		0x3F
+#define PALMTX_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
new file mode 100644
index 00000000000..4dcd2e8baa6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO	0
+#define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC		0x51	/* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM	0x54	/* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO	52
+#define PCM027_ETH_IRQ		IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS		PXA_CS5_PHYS
+#define PCM027_ETH_SIZE		(1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO	114
+#define PCM027_CAN_IRQ		IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS		0x22000000
+#define PCM027_CAN_SIZE		0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO	27
+#define PCM027_EGPIO_IRQ	IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS		24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS	0x00000000
+#define PCM027_FLASH_SIZE	0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU		90
+#define PCM027_LED_HEARD_BEAT	91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
new file mode 100644
index 00000000000..8a4383b776d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/pcm027.h>
+
+/*
+ * definitions relevant only when the PCM-990
+ * development base board is in use
+ */
+
+/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
+#define PCM990_CTRL_INT_IRQ_GPIO	9
+#define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
+#define PCM990_CTRL_BASE		0xea000000
+#define PCM990_CTRL_SIZE		(1*1024*1024)
+
+#define PCM990_CTRL_PWR_IRQ_GPIO	14
+#define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+/* visible CPLD (U7) registers */
+#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
+#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
+#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
+#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
+
+#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
+#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
+#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
+#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
+
+#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
+#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
+#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
+#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
+
+#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
+#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
+#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
+#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
+#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
+
+#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
+#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
+
+#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
+#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
+#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
+#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
+#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
+
+#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
+#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
+#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
+#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
+
+#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
+#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
+#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
+#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
+#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
+
+#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
+#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
+#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
+#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
+#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
+
+#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
+#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
+#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
+#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
+
+#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
+#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
+#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
+
+#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
+#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
+#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
+#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
+#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
+
+#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
+#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __PCM990_CTRL_REG(x) \
+		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
+#else
+#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
+#endif
+
+#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
+#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
+#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
+#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
+#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
+#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
+#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
+#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
+#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
+#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
+
+
+/*
+ * IDE
+ */
+#define PCM990_IDE_IRQ_GPIO	13
+#define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
+#define PCM990_IDE_PLD_BASE	0xee000000
+#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
+
+/* visible CPLD (U6) registers */
+#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
+#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
+#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
+
+#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
+#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
+#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
+#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
+
+#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
+#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
+#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
+#define PCM990_IDE_RDY		0x0008	/* RDY */
+
+#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
+#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
+#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
+#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
+
+#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
+#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
+#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
+#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
+
+#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
+#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define  __PCM990_IDE_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
+#else
+# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
+#endif
+
+#define PCM990_IDE0 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
+#define PCM990_IDE1 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
+#define PCM990_IDE2 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
+#define PCM990_IDE3 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
+#define PCM990_IDE4 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
+
+/*
+ * Compact Flash
+ */
+#define PCM990_CF_IRQ_GPIO	11
+#define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_CD_GPIO	12
+#define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
+#define PCM990_CF_PLD_BASE	0xef000000
+#define PCM990_CF_PLD_SIZE	(1*1024*1024)
+#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
+#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
+
+/* visible CPLD (U6) registers */
+#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
+#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
+#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
+#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
+#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
+
+#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
+#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
+#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
+
+#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
+#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
+#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
+#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
+
+#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
+#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
+#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
+#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
+#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
+
+#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
+#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
+#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
+#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
+#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
+
+#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
+#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
+#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
+#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
+#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
+
+#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
+#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
+#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
+
+#ifndef __ASSEMBLY__
+#  define  __PCM990_CF_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
+#else
+#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
+#endif
+
+#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
+#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
+#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
+#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
+#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
+#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
+#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
+
+/*
+ * Wolfson AC97 Touch
+ */
+#define PCM990_AC97_IRQ_GPIO	10
+#define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+/*
+ * MMC phyCORE
+ */
+#define PCM990_MMC0_IRQ_GPIO	9
+#define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+
+/*
+ * USB phyCore
+ */
+#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
+#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
new file mode 100644
index 00000000000..261e5bc958d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/suspend.h>
+
+struct pxa_cpu_pm_fns {
+	int	save_count;
+	void	(*save)(unsigned long *);
+	void	(*restore)(unsigned long *);
+	int	(*valid)(suspend_state_t state);
+	void	(*enter)(suspend_state_t state);
+};
+
+extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
+
+/* sleep.S */
+extern void pxa25x_cpu_suspend(unsigned int);
+extern void pxa27x_cpu_suspend(unsigned int);
+extern void pxa_cpu_resume(void);
+
+extern int pxa_pm_enter(suspend_state_t state);
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
new file mode 100644
index 00000000000..67debc47e8c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-pxa/include/mach/poodle.h
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on:
+ *   arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   Update to 2.6 John Lenz
+ */
+#ifndef __ASM_ARCH_POODLE_H
+#define __ASM_ARCH_POODLE_H  1
+
+/*
+ * GPIOs
+ */
+/* PXA GPIOs */
+#define POODLE_GPIO_ON_KEY		(0)
+#define POODLE_GPIO_AC_IN		(1)
+#define POODLE_GPIO_CO			16
+#define POODLE_GPIO_TP_INT		(5)
+#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
+#define POODLE_GPIO_GA_INT		(10)
+#define POODLE_GPIO_IR_ON		(22)
+#define POODLE_GPIO_HP_IN		(4)
+#define POODLE_GPIO_CF_IRQ		(17)
+#define POODLE_GPIO_CF_CD		(14)
+#define POODLE_GPIO_CF_STSCHG		(14)
+#define POODLE_GPIO_SD_PWR		(33)
+#define POODLE_GPIO_SD_PWR1		(3)
+#define POODLE_GPIO_nSD_CLK		(6)
+#define POODLE_GPIO_nSD_WP		(7)
+#define POODLE_GPIO_nSD_INT		(8)
+#define POODLE_GPIO_nSD_DETECT		(9)
+#define POODLE_GPIO_MAIN_BAT_LOW	(13)
+#define POODLE_GPIO_BAT_COVER		(13)
+#define POODLE_GPIO_USB_PULLUP		(20)
+#define POODLE_GPIO_ADC_TEMP_ON		(21)
+#define POODLE_GPIO_BYPASS_ON		(36)
+#define POODLE_GPIO_CHRG_ON		(38)
+#define POODLE_GPIO_CHRG_FULL		(16)
+#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
+
+/* PXA GPIOs */
+#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
+
+/* SCOOP GPIOs */
+#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
+#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
+#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
+#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
+#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
+#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
+
+#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
+#define POODLE_SCOOP_IO_OUT	( 0 )
+
+#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
+#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
+#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
+#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
+#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
+
+extern struct platform_device poodle_locomo_device;
+
+#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
new file mode 100644
index 00000000000..12288ca3cbb
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -0,0 +1,1070 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa-regs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA_REGS_H
+#define __PXA_REGS_H
+
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS	0x00000000
+#define PXA_CS1_PHYS	0x04000000
+#define PXA_CS2_PHYS	0x08000000
+#define PXA_CS3_PHYS	0x0C000000
+#define PXA_CS4_PHYS	0x10000000
+#define PXA_CS5_PHYS	0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
+                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
+                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
+
+
+
+/*
+ * DMA Controller
+ */
+
+#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
+#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
+#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
+#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
+#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
+#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
+#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
+#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
+#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
+#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
+#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
+#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
+#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
+#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
+#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
+#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
+
+#define DCSR(x)		__REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#ifdef CONFIG_PXA27x
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
+#endif
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
+#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
+
+#define DRCMR(n)	(*(((n) < 64) ? \
+			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
+			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
+
+#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15		__REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
+#define DRCMR16		__REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
+#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23		__REG(0x4000015c)  /* Reserved */
+#define DRCMR24		__REG(0x40000160)  /* Reserved */
+#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29		__REG(0x40000174)  /* Reserved */
+#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34		__REG(0x40000188)  /* Reserved */
+#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39		__REG(0x4000019C)  /* Reserved */
+#define DRCMR66		__REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
+#define DRCMR67		__REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
+#define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
+
+#define DRCMRRXSADR	DRCMR2
+#define DRCMRTXSADR	DRCMR3
+#define DRCMRRXBTRBR	DRCMR4
+#define DRCMRTXBTTHR	DRCMR5
+#define DRCMRRXFFRBR	DRCMR6
+#define DRCMRTXFFTHR	DRCMR7
+#define DRCMRRXMCDR	DRCMR8
+#define DRCMRRXMODR	DRCMR9
+#define DRCMRTXMODR	DRCMR10
+#define DRCMRRXPCDR	DRCMR11
+#define DRCMRTXPCDR	DRCMR12
+#define DRCMRRXSSDR	DRCMR13
+#define DRCMRTXSSDR	DRCMR14
+#define DRCMRRXSS2DR   DRCMR15
+#define DRCMRTXSS2DR   DRCMR16
+#define DRCMRRXICDR	DRCMR17
+#define DRCMRTXICDR	DRCMR18
+#define DRCMRRXSTRBR	DRCMR19
+#define DRCMRTXSTTHR	DRCMR20
+#define DRCMRRXMMC	DRCMR21
+#define DRCMRTXMMC	DRCMR22
+#define DRCMRRXSS3DR   DRCMR66
+#define DRCMRTXSS3DR   DRCMR67
+#define DRCMRUDC(x)	DRCMR((x) + 24)
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
+#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
+#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
+#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
+#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
+#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
+#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
+#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
+#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
+#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
+#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
+#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
+#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
+#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
+#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
+#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
+#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
+#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
+#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
+#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
+#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
+#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
+#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
+#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
+#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
+#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
+#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
+#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
+#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
+#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
+#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
+#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
+#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
+#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
+#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
+#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
+#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
+#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
+#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
+#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
+#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
+#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
+#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
+#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
+#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
+#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
+#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
+#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x)	__REG2(0x40000200, (x) << 4)
+#define DSADR(x)	__REG2(0x40000204, (x) << 4)
+#define DTADR(x)	__REG2(0x40000208, (x) << 4)
+#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART		FFRBR
+#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART		BTRBR
+#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART		STRBR
+#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
+#define STMSR		__REG(0x40700018)  /* Reserved */
+#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART		HWRBR
+#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
+#define IER_UUE		(1 << 6)	/* UART Unit Enable */
+#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
+#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
+#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
+#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
+#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
+#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
+#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
+#define IIR_TOD		(1 << 3)	/* Time Out Detected */
+#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
+#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
+#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
+
+#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
+#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
+#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
+#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
+#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1	(0)
+#define FCR_ITL_8	(FCR_ITL1)
+#define FCR_ITL_16	(FCR_ITL2)
+#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
+#define LCR_SB		(1 << 6)	/* Set Break */
+#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
+#define LCR_EPS		(1 << 4)	/* Even Parity Select */
+#define LCR_PEN		(1 << 3)	/* Parity Enable */
+#define LCR_STB		(1 << 2)	/* Stop Bit */
+#define LCR_WLS1	(1 << 1)	/* Word Length Select */
+#define LCR_WLS0	(1 << 0)	/* Word Length Select */
+
+#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
+#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
+#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
+#define LSR_BI		(1 << 4)	/* Break Interrupt */
+#define LSR_FE		(1 << 3)	/* Framing Error */
+#define LSR_PE		(1 << 2)	/* Parity Error */
+#define LSR_OE		(1 << 1)	/* Overrun Error */
+#define LSR_DR		(1 << 0)	/* Data Ready */
+
+#define MCR_LOOP	(1 << 4)
+#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
+#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
+#define MCR_RTS		(1 << 1)	/* Request to Send */
+#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
+
+#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
+#define MSR_RI		(1 << 6)	/* Ring Indicator */
+#define MSR_DSR		(1 << 5)	/* Data Set Ready */
+#define MSR_CTS		(1 << 4)	/* Clear To Send */
+#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
+#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
+#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
+#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
+#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
+#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
+
+
+/*
+ * I2C registers
+ */
+
+#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
+#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
+#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
+#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
+#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
+
+#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
+#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
+#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
+
+#define ICR_START	(1 << 0)	   /* start bit */
+#define ICR_STOP	(1 << 1)	   /* stop bit */
+#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
+#define ICR_TB		(1 << 3)	   /* transfer byte bit */
+#define ICR_MA		(1 << 4)	   /* master abort */
+#define ICR_SCLE	(1 << 5)	   /* master clock enable */
+#define ICR_IUE		(1 << 6)	   /* unit enable */
+#define ICR_GCD		(1 << 7)	   /* general call disable */
+#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
+#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
+#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
+#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
+#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
+#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
+#define ICR_UR		(1 << 14)	   /* unit reset */
+
+#define ISR_RWM		(1 << 0)	   /* read/write mode */
+#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
+#define ISR_UB		(1 << 2)	   /* unit busy */
+#define ISR_IBB		(1 << 3)	   /* bus busy */
+#define ISR_SSD		(1 << 4)	   /* slave stop detected */
+#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
+#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
+#define ISR_IRF		(1 << 7)	   /* rx buffer full */
+#define ISR_GCAD	(1 << 8)	   /* general call address detected */
+#define ISR_SAD		(1 << 9)	   /* slave address detected */
+#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
+
+
+/*
+ * Serial Audio Controller
+ */
+
+#define SACR0		__REG(0x40400000)  /* Global Control Register */
+#define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR		__REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
+#define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
+#define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
+#define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
+#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
+#define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
+#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
+#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
+#define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
+#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
+#define SACR1_AMSL	(1 << 0)	/* Specify Alternate Mode */
+
+#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
+#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
+#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
+#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
+#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
+#define SASR0_BSY	(1 << 2)	/* I2S Busy */
+#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
+#define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
+
+#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		__REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		__REG(0x4050000C)  /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
+#endif
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		__REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		__REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		__REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		__REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		__REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
+
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define FICP		__REG(0x40800000)  /* Start of FICP area */
+#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
+#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
+#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
+
+#define ICCR0_AME	(1 << 7)	/* Address match enable */
+#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
+#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
+#define ICCR0_RXE	(1 << 4)	/* Receive enable */
+#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
+#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
+#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
+#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
+
+#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
+#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
+#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
+#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
+#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE	(1 << 5)	/* Framing error */
+#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
+#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
+#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
+#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
+#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
+
+#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
+#define ICSR1_CRE	(1 << 5)	/* CRC error */
+#define ICSR1_EOF	(1 << 4)	/* End of frame */
+#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
+#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
+#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
+#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		__REG(0x40900000)  /* RTC Count Register */
+#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR		__REG(0x40900008)  /* RTC Status Register */
+#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0		__REG(0x40A00000)  /* */
+#define OSMR1		__REG(0x40A00004)  /* */
+#define OSMR2		__REG(0x40A00008)  /* */
+#define OSMR3		__REG(0x40A0000C)  /* */
+#define OSMR4		__REG(0x40A00080)  /* */
+#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		__REG(0x40A000C0)  /* */
+#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
+#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
+#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+
+#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
+#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
+
+#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+/* Interrupt Controller */
+
+#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
+#else
+
+#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#endif
+
+/*
+ * Power Manager - see pxa2xx-regs.h
+ */
+
+/*
+ * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
+ */
+
+/*
+ * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
+ */
+
+/*
+ * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ */
+
+#ifdef CONFIG_PXA27x
+
+/* Camera Interface */
+#define CICR0		__REG(0x50000000)
+#define CICR1		__REG(0x50000004)
+#define CICR2		__REG(0x50000008)
+#define CICR3		__REG(0x5000000C)
+#define CICR4		__REG(0x50000010)
+#define CISR		__REG(0x50000014)
+#define CIFR		__REG(0x50000018)
+#define CITOR		__REG(0x5000001C)
+#define CIBR0		__REG(0x50000028)
+#define CIBR1		__REG(0x50000030)
+#define CIBR2		__REG(0x50000038)
+
+#define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
+#define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
+#define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
+#define CICR0_ENB	(1 << 28)	/* Camera interface enable */
+#define CICR0_DIS	(1 << 27)	/* Camera interface disable */
+#define CICR0_SIM	(0x7 << 24)	/* Sensor interface mode mask */
+#define CICR0_TOM	(1 << 9)	/* Time-out mask */
+#define CICR0_RDAVM	(1 << 8)	/* Receive-data-available mask */
+#define CICR0_FEM	(1 << 7)	/* FIFO-empty mask */
+#define CICR0_EOLM	(1 << 6)	/* End-of-line mask */
+#define CICR0_PERRM	(1 << 5)	/* Parity-error mask */
+#define CICR0_QDM	(1 << 4)	/* Quick-disable mask */
+#define CICR0_CDM	(1 << 3)	/* Disable-done mask */
+#define CICR0_SOFM	(1 << 2)	/* Start-of-frame mask */
+#define CICR0_EOFM	(1 << 1)	/* End-of-frame mask */
+#define CICR0_FOM	(1 << 0)	/* FIFO-overrun mask */
+
+#define CICR1_TBIT	(1 << 31)	/* Transparency bit */
+#define CICR1_RGBT_CONV	(0x3 << 29)	/* RGBT conversion mask */
+#define CICR1_PPL	(0x7ff << 15)	/* Pixels per line mask */
+#define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
+#define CICR1_RGB_F	(1 << 11)	/* RGB format */
+#define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
+#define CICR1_RGB_BPP	(0x7 << 7)	/* RGB bis per pixel mask */
+#define CICR1_RAW_BPP	(0x3 << 5)	/* Raw bis per pixel mask */
+#define CICR1_COLOR_SP	(0x3 << 3)	/* Color space mask */
+#define CICR1_DW	(0x7 << 0)	/* Data width mask */
+
+#define CICR2_BLW	(0xff << 24)	/* Beginning-of-line pixel clock
+					   wait count mask */
+#define CICR2_ELW	(0xff << 16)	/* End-of-line pixel clock
+					   wait count mask */
+#define CICR2_HSW	(0x3f << 10)	/* Horizontal sync pulse width mask */
+#define CICR2_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR2_FSW	(0x7 << 0)	/* Frame stabilization
+					   wait count mask */
+
+#define CICR3_BFW	(0xff << 24)	/* Beginning-of-frame line clock
+					   wait count mask */
+#define CICR3_EFW	(0xff << 16)	/* End-of-frame line clock
+					   wait count mask */
+#define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
+#define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR3_LPF	(0x7ff << 0)	/* Lines per frame mask */
+
+#define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
+#define CICR4_PCP	(1 << 22)	/* Pixel clock polarity */
+#define CICR4_HSP	(1 << 21)	/* Horizontal sync polarity */
+#define CICR4_VSP	(1 << 20)	/* Vertical sync polarity */
+#define CICR4_MCLK_EN	(1 << 19)	/* MCLK enable */
+#define CICR4_FR_RATE	(0x7 << 8)	/* Frame rate mask */
+#define CICR4_DIV	(0xff << 0)	/* Clock divisor mask */
+
+#define CISR_FTO	(1 << 15)	/* FIFO time-out */
+#define CISR_RDAV_2	(1 << 14)	/* Channel 2 receive data available */
+#define CISR_RDAV_1	(1 << 13)	/* Channel 1 receive data available */
+#define CISR_RDAV_0	(1 << 12)	/* Channel 0 receive data available */
+#define CISR_FEMPTY_2	(1 << 11)	/* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1	(1 << 10)	/* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0	(1 << 9)	/* Channel 0 FIFO empty */
+#define CISR_EOL	(1 << 8)	/* End of line */
+#define CISR_PAR_ERR	(1 << 7)	/* Parity error */
+#define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
+#define CISR_CDD	(1 << 5)	/* Camera interface disable done */
+#define CISR_SOF	(1 << 4)	/* Start of frame */
+#define CISR_EOF	(1 << 3)	/* End of frame */
+#define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
+#define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */
+#define CISR_IFO_0	(1 << 0)	/* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2	(0x7f << 23)	/* FIFO 2 level mask */
+#define CIFR_FLVL1	(0x7f << 16)	/* FIFO 1 level mask */
+#define CIFR_FLVL0	(0xff << 8)	/* FIFO 0 level mask */
+#define CIFR_THL_0	(0x3 << 4)	/* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F	(1 << 3)	/* Reset input FIFOs */
+#define CIFR_FEN2	(1 << 2)	/* FIFO enable for channel 2 */
+#define CIFR_FEN1	(1 << 1)	/* FIFO enable for channel 1 */
+#define CIFR_FEN0	(1 << 0)	/* FIFO enable for channel 0 */
+
+#define SRAM_SIZE		0x40000 /* 4x64K  */
+
+#define SRAM_MEM_PHYS		0x5C000000
+
+#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
+#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
+
+#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
+#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
+#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
+#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
+
+#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
+#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
+#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
+#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
+
+#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
+#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
+#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
+#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
+
+#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
+#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
+#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
+#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
+
+#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
+#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
+#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
+#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
+
+#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
+
+#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
+#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
+#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
+
+#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
+#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
+#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
+
+#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
+#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
+#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
+
+#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
+#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
+#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
+
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS	(0x4C000000)
+#define UHCREV		__REG(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON		__REG(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS		__REG(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS		__REG(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE		__REG(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD		__REG(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA		__REG(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED		__REG(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED		__REG(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED		__REG(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED		__REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED		__REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD	__REG(0x4C000030) /* UHC Done Head */
+#define UHCFMI		__REG(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR		__REG(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
+#define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
+
+#define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2	__REG(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3	__REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT		__REG(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
+#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
+#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
+#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
+
+#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
+#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
+#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
+#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
+#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
+#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
+#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
+#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
+
+#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
+#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
+					   Interrupt Enable*/
+#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
+
+#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
+
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE		0x1
+#define PWRMODE_STANDBY		0x2
+#define PWRMODE_SLEEP		0x3
+#define PWRMODE_DEEPSLEEP	0x7
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
new file mode 100644
index 00000000000..1b80a4805a6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_ARCH_PXA25X_UDC_H
+#define _ASM_ARCH_PXA25X_UDC_H
+
+#ifdef _ASM_ARCH_PXA27X_UDC_H
+#error "You can't include both PXA25x and PXA27x UDC support"
+#endif
+
+#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
+#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
+#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
+
+#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
+#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
+#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
+#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
+#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
+#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
+#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
+#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
+#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
+#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
+#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
+#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
+#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
+#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
+#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
+#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
+#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
+#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
+#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
+#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
+#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
+#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
+#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
+#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
+#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
new file mode 100644
index 00000000000..ab1443f8bd8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_ARCH_PXA27X_UDC_H
+#define _ASM_ARCH_PXA27X_UDC_H
+
+#ifdef _ASM_ARCH_PXA25X_UDC_H
+#error You cannot include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDCCR           __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
+#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
+					   Protocol Port Support */
+#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
+					   Support */
+#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
+					   Enable */
+#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
+#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
+#define UDCCR_ACN_S	11
+#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
+#define UDCCR_AIN_S	8
+#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
+					   Setting Number */
+#define UDCCR_AAISN_S	5
+#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
+					   Configuration */
+#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
+					   Error */
+#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
+#define UDCCR_UDA	(1 << 1)	/* UDC Active */
+#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
+
+#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
+#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
+#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
+
+#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
+#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
+#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
+#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
+#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
+
+#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
+					   Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
+					   Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
+					   Interrupt Enable */
+
+#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
+#define UP3OCR		  __REG(0x40600024)  /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
+#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
+#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
+#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS(x)		((x & 7) << 24)	/* Single-Ended Output Select */
+
+#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
+#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
+#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
+#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
+#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
+#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
+#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST	(1 << 5)	/* Force STALL */
+#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
+#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
+#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
+#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
+
+#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
+#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
+#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
+#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
+#define UDCCONR_CN_S	(25)
+#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
+#define UDCCONR_IN_S	(22)
+#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
+#define UDCCONR_AISN_S	(19)
+#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
+#define UDCCONR_EN_S	(15)
+#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
+#define UDCCONR_ET_S	(13)
+#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
+#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
+#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
+#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
+#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
+#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
+#define UDCCONR_MPS_S	(2)
+#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
+#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDC_FNR_MASK     (0x7ff)
+
+#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK    (0x3ff)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
new file mode 100644
index 00000000000..d5a48a96dea
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
+#define __ASM_ARCH_PXA27x_KEYPAD_H
+
+#include <linux/input.h>
+
+#define MAX_MATRIX_KEY_ROWS	(8)
+#define MAX_MATRIX_KEY_COLS	(8)
+
+/* pxa3xx keypad platform specific parameters
+ *
+ * NOTE:
+ * 1. direct_key_num indicates the number of keys in the direct keypad
+ *    _plus_ the number of rotary-encoder sensor inputs,  this can be
+ *    left as 0 if only rotary encoders are enabled,  the driver will
+ *    automatically calculate this
+ *
+ * 2. direct_key_map is the key code map for the direct keys, if rotary
+ *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
+ *
+ * 3. rotary can be either interpreted as a relative input event (e.g.
+ *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
+ *
+ * 4. matrix key and direct key will use the same debounce_interval by
+ *    default, which should be sufficient in most cases
+ */
+struct pxa27x_keypad_platform_data {
+
+	/* code map for the matrix keys */
+	unsigned int	matrix_key_rows;
+	unsigned int	matrix_key_cols;
+	unsigned int	*matrix_key_map;
+	int		matrix_key_map_size;
+
+	/* direct keys */
+	int		direct_key_num;
+	unsigned int	direct_key_map[8];
+
+	/* rotary encoders 0 */
+	int		enable_rotary0;
+	int		rotary0_rel_code;
+	int		rotary0_up_key;
+	int		rotary0_down_key;
+
+	/* rotary encoders 1 */
+	int		enable_rotary1;
+	int		rotary1_rel_code;
+	int		rotary1_up_key;
+	int		rotary1_down_key;
+
+	/* key debounce interval */
+	unsigned int	debounce_interval;
+};
+
+#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
+
+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
new file mode 100644
index 00000000000..6ef1dd09970
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -0,0 +1,368 @@
+#ifndef __ASM_ARCH_PXA2XX_GPIO_H
+#define __ASM_ARCH_PXA2XX_GPIO_H
+
+#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST		1	/* reset */
+#define GPIO6_MMCCLK		6	/* MMC Clock */
+#define GPIO7_48MHz		7	/* 48 MHz clock output */
+#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
+#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
+#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
+#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
+#define GPIO12_32KHz		12	/* 32 kHz out */
+#define GPIO12_CIF_DD_7		12	/* Camera data pin 7 */
+#define GPIO13_MBGNT		13	/* memory controller grant */
+#define GPIO14_MBREQ		14	/* alternate bus master request */
+#define GPIO15_nCS_1		15	/* chip select 1 */
+#define GPIO16_PWM0		16	/* PWM0 output */
+#define GPIO17_PWM1		17	/* PWM1 output */
+#define GPIO17_CIF_DD_6		17	/* Camera data pin 6 */
+#define GPIO18_RDY		18	/* Ext. Bus Ready */
+#define GPIO19_DREQ1		19	/* External DMA Request */
+#define GPIO20_DREQ0		20	/* External DMA Request */
+#define GPIO23_SCLK		23	/* SSP clock */
+#define GPIO23_CIF_MCLK		23	/* Camera Master Clock */
+#define GPIO24_SFRM		24	/* SSP Frame */
+#define GPIO24_CIF_FV		24	/* Camera frame start signal */
+#define GPIO25_STXD		25	/* SSP transmit */
+#define GPIO25_CIF_LV		25	/* Camera line start signal */
+#define GPIO26_SRXD		26	/* SSP receive */
+#define GPIO26_CIF_PCLK		26	/* Camera Pixel Clock */
+#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
+#define GPIO27_CIF_DD_0		27	/* Camera data pin 0 */
+#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
+#define GPIO31_SYNC		31	/* AC97/I2S sync */
+#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
+#define GPIO32_SYSCLK		32	/* I2S System Clock */
+#define GPIO32_MMCCLK		32	/* MMC Clock (PXA270) */
+#define GPIO33_nCS_5		33	/* chip select 5 */
+#define GPIO34_FFRXD		34	/* FFUART receive */
+#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
+#define GPIO35_FFCTS		35	/* FFUART Clear to send */
+#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
+#define GPIO37_FFDSR		37	/* FFUART data set ready */
+#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
+#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
+#define GPIO39_FFTXD		39	/* FFUART transmit data */
+#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
+#define GPIO41_FFRTS		41	/* FFUART request to send */
+#define GPIO42_BTRXD		42	/* BTUART receive data */
+#define GPIO42_HWRXD		42	/* HWUART receive data */
+#define GPIO42_CIF_MCLK		42	/* Camera Master Clock */
+#define GPIO43_BTTXD		43	/* BTUART transmit data */
+#define GPIO43_HWTXD		43	/* HWUART transmit data */
+#define GPIO43_CIF_FV		43	/* Camera frame start signal */
+#define GPIO44_BTCTS		44	/* BTUART clear to send */
+#define GPIO44_HWCTS		44	/* HWUART clear to send */
+#define GPIO44_CIF_LV		44	/* Camera line start signal */
+#define GPIO45_BTRTS		45	/* BTUART request to send */
+#define GPIO45_HWRTS		45	/* HWUART request to send */
+#define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
+#define GPIO45_CIF_PCLK		45	/* Camera Pixel Clock */
+#define GPIO46_ICPRXD		46	/* ICP receive data */
+#define GPIO46_STRXD		46	/* STD_UART receive data */
+#define GPIO47_ICPTXD		47	/* ICP transmit data */
+#define GPIO47_STTXD		47	/* STD_UART transmit data */
+#define GPIO47_CIF_DD_0		47	/* Camera data pin 0 */
+#define GPIO48_nPOE		48	/* Output Enable for Card Space */
+#define GPIO48_CIF_DD_5		48	/* Camera data pin 5 */
+#define GPIO49_nPWE		49	/* Write Enable for Card Space */
+#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
+#define GPIO50_CIF_DD_3		50	/* Camera data pin 3 */
+#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
+#define GPIO51_CIF_DD_2		51	/* Camera data pin 2 */
+#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
+#define GPIO52_CIF_DD_4		52	/* Camera data pin 4 */
+#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
+#define GPIO53_MMCCLK		53	/* MMC Clock */
+#define GPIO53_CIF_MCLK		53	/* Camera Master Clock */
+#define GPIO54_MMCCLK		54	/* MMC Clock */
+#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
+#define GPIO54_nPCE_2		54	/* Card Enable for Card Space (PXA27x) */
+#define GPIO54_CIF_PCLK		54	/* Camera Pixel Clock */
+#define GPIO55_nPREG		55	/* Card Address bit 26 */
+#define GPIO55_CIF_DD_1		55	/* Camera data pin 1 */
+#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
+#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0		58	/* LCD data pin 0 */
+#define GPIO59_LDD_1		59	/* LCD data pin 1 */
+#define GPIO60_LDD_2		60	/* LCD data pin 2 */
+#define GPIO61_LDD_3		61	/* LCD data pin 3 */
+#define GPIO62_LDD_4		62	/* LCD data pin 4 */
+#define GPIO63_LDD_5		63	/* LCD data pin 5 */
+#define GPIO64_LDD_6		64	/* LCD data pin 6 */
+#define GPIO65_LDD_7		65	/* LCD data pin 7 */
+#define GPIO66_LDD_8		66	/* LCD data pin 8 */
+#define GPIO66_MBREQ		66	/* alternate bus master req */
+#define GPIO67_LDD_9		67	/* LCD data pin 9 */
+#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
+#define GPIO68_LDD_10		68	/* LCD data pin 10 */
+#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
+#define GPIO69_LDD_11		69	/* LCD data pin 11 */
+#define GPIO69_MMCCLK		69	/* MMC_CLK */
+#define GPIO70_LDD_12		70	/* LCD data pin 12 */
+#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13		71	/* LCD data pin 13 */
+#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14		72	/* LCD data pin 14 */
+#define GPIO72_32kHz		72	/* 32 kHz clock */
+#define GPIO73_LDD_15		73	/* LCD data pin 15 */
+#define GPIO73_MBGNT		73	/* Memory controller grant */
+#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
+#define GPIO75_LCD_LCLK		75	/* LCD line clock */
+#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
+#define GPIO78_nCS_2		78	/* chip select 2 */
+#define GPIO79_nCS_3		79	/* chip select 3 */
+#define GPIO80_nCS_4		80	/* chip select 4 */
+#define GPIO81_NSCLK		81	/* NSSP clock */
+#define GPIO81_CIF_DD_0		81	/* Camera data pin 0 */
+#define GPIO82_NSFRM		82	/* NSSP Frame */
+#define GPIO82_CIF_DD_5		82	/* Camera data pin 5 */
+#define GPIO83_NSTXD		83	/* NSSP transmit */
+#define GPIO83_CIF_DD_4		83	/* Camera data pin 4 */
+#define GPIO84_NSRXD		84	/* NSSP receive */
+#define GPIO84_CIF_FV		84	/* Camera frame start signal */
+#define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
+#define GPIO85_CIF_LV		85	/* Camera line start signal */
+#define GPIO90_CIF_DD_4		90	/* Camera data pin 4 */
+#define GPIO91_CIF_DD_5		91	/* Camera data pin 5 */
+#define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
+#define GPIO93_CIF_DD_6		93	/* Camera data pin 6 */
+#define GPIO94_CIF_DD_5		94	/* Camera data pin 5 */
+#define GPIO95_CIF_DD_4		95	/* Camera data pin 4 */
+#define GPIO96_FFRXD		96	/* FFUART recieve */
+#define GPIO98_FFRTS		98	/* FFUART request to send */
+#define GPIO98_CIF_DD_0		98	/* Camera data pin 0 */
+#define GPIO99_FFTXD		99	/* FFUART transmit data */
+#define GPIO100_FFCTS		100	/* FFUART Clear to send */
+#define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
+#define GPIO103_CIF_DD_3	103	/* Camera data pin 3 */
+#define GPIO104_CIF_DD_2	104	/* Camera data pin 2 */
+#define GPIO105_CIF_DD_1	105	/* Camera data pin 1 */
+#define GPIO106_CIF_DD_9	106	/* Camera data pin 9 */
+#define GPIO107_CIF_DD_8	107	/* Camera data pin 8 */
+#define GPIO108_CIF_DD_7	108	/* Camera data pin 7 */
+#define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
+#define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
+#define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
+#define GPIO111_MMCDAT3		111	/* MMC DAT3 (PXA27x) */
+#define GPIO111_MMCCS1		111	/* MMC Chip Select 1 (PXA27x) */
+#define GPIO112_MMCCMD		112	/* MMC CMD (PXA27x) */
+#define GPIO113_I2S_SYSCLK	113	/* I2S System Clock (PXA27x) */
+#define GPIO113_AC97_RESET_N	113	/* AC97 NRESET on (PXA27x) */
+#define GPIO114_CIF_DD_1	114	/* Camera data pin 1 */
+#define GPIO115_CIF_DD_3	115	/* Camera data pin 3 */
+#define GPIO116_CIF_DD_2	116	/* Camera data pin 2 */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN			0x000
+#define GPIO_OUT		0x080
+#define GPIO_ALT_FN_1_IN	0x100
+#define GPIO_ALT_FN_1_OUT	0x180
+#define GPIO_ALT_FN_2_IN	0x200
+#define GPIO_ALT_FN_2_OUT	0x280
+#define GPIO_ALT_FN_3_IN	0x300
+#define GPIO_ALT_FN_3_OUT	0x380
+#define GPIO_MD_MASK_NR		0x07f
+#define GPIO_MD_MASK_DIR	0x080
+#define GPIO_MD_MASK_FN		0x300
+#define GPIO_DFLT_LOW		0x400
+#define GPIO_DFLT_HIGH		0x800
+
+#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO7_48MHz_MD		( 7 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_CIF_DD_7_MD	(12 | GPIO_ALT_FN_2_IN)
+#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_CIF_DD_6_MD	(17 | GPIO_ALT_FN_2_IN)
+#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_CIF_MCLK_MD	(23 | GPIO_ALT_FN_1_OUT)
+#define GPIO23_SCLK_MD		(23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_CIF_FV_MD	(24 | GPIO_ALT_FN_1_OUT)
+#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_CIF_LV_MD	(25 | GPIO_ALT_FN_1_OUT)
+#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
+#define GPIO26_CIF_PCLK_MD	(26 | GPIO_ALT_FN_2_IN)
+#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
+#define GPIO27_CIF_DD_0_MD	(27 | GPIO_ALT_FN_3_IN)
+#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_IN_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
+#define GPIO28_BITCLK_OUT_I2S_MD	(28 | GPIO_ALT_FN_1_OUT)
+#define GPIO29_SDATA_IN_AC97_MD	(29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD	(30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
+#define GPIO32_SYSCLK_I2S_MD	(32 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_MMCCLK_MD	(32 | GPIO_ALT_FN_2_OUT)
+#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
+#define GPIO35_KP_MKOUT6_MD	(35 | GPIO_ALT_FN_2_OUT)
+#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_KP_MKOUT7_MD	(41 | GPIO_ALT_FN_1_OUT)
+#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
+#define GPIO42_CIF_MCLK_MD	(42 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD		(43 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_CIF_FV_MD	(43 | GPIO_ALT_FN_3_OUT)
+#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD		(44 | GPIO_ALT_FN_3_IN)
+#define GPIO44_CIF_LV_MD	(44 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_CIF_PCLK_MD	(45 | GPIO_ALT_FN_3_IN)
+#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD		(45 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_SYSCLK_AC97_MD	(45 | GPIO_ALT_FN_1_OUT)
+#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_CIF_DD_0_MD	(47 | GPIO_ALT_FN_1_IN)
+#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_CIF_DD_5_MD	(48 | GPIO_ALT_FN_1_IN)
+#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD		(48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD		(49 | GPIO_ALT_FN_1_IN)
+#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD		(50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
+#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_HWRTS_MD		(51 | GPIO_ALT_FN_1_OUT)
+#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
+#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_CIF_DD_4_MD	(52 | GPIO_ALT_FN_1_IN)
+#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
+#define GPIO53_CIF_MCLK_MD	(53 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_nPCE_2_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_CIF_PCLK_MD	(54 | GPIO_ALT_FN_3_IN)
+#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_CIF_DD_1_MD	(55 | GPIO_ALT_FN_1_IN)
+#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nPCE_2_MD	(78 | GPIO_ALT_FN_1_OUT)
+#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_pSKTSEL_MD	(79 | GPIO_ALT_FN_1_OUT)
+#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
+#define GPIO81_NSSP_CLK_OUT	(81 | GPIO_ALT_FN_1_OUT)
+#define GPIO81_NSSP_CLK_IN	(81 | GPIO_ALT_FN_1_IN)
+#define GPIO81_CIF_DD_0_MD	(81 | GPIO_ALT_FN_2_IN)
+#define GPIO82_NSSP_FRM_OUT	(82 | GPIO_ALT_FN_1_OUT)
+#define GPIO82_NSSP_FRM_IN	(82 | GPIO_ALT_FN_1_IN)
+#define GPIO82_CIF_DD_5_MD	(82 | GPIO_ALT_FN_3_IN)
+#define GPIO83_NSSP_TX		(83 | GPIO_ALT_FN_1_OUT)
+#define GPIO83_NSSP_RX		(83 | GPIO_ALT_FN_2_IN)
+#define GPIO83_CIF_DD_4_MD	(83 | GPIO_ALT_FN_3_IN)
+#define GPIO84_NSSP_TX		(84 | GPIO_ALT_FN_1_OUT)
+#define GPIO84_NSSP_RX		(84 | GPIO_ALT_FN_2_IN)
+#define GPIO84_CIF_FV_MD	(84 | GPIO_ALT_FN_3_IN)
+#define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
+#define GPIO85_CIF_LV_MD	(85 | GPIO_ALT_FN_3_IN)
+#define GPIO86_nPCE_1_MD	(86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD	(88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD	(89 | GPIO_ALT_FN_2_OUT)
+#define GPIO90_CIF_DD_4_MD	(90 | GPIO_ALT_FN_3_IN)
+#define GPIO91_CIF_DD_5_MD	(91 | GPIO_ALT_FN_3_IN)
+#define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
+#define GPIO93_CIF_DD_6_MD	(93 | GPIO_ALT_FN_2_IN)
+#define GPIO94_CIF_DD_5_MD	(94 | GPIO_ALT_FN_2_IN)
+#define GPIO95_CIF_DD_4_MD	(95 | GPIO_ALT_FN_2_IN)
+#define GPIO95_KP_MKIN6_MD	(95 | GPIO_ALT_FN_3_IN)
+#define GPIO96_KP_DKIN3_MD	(96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD		(96 | GPIO_ALT_FN_3_IN)
+#define GPIO97_KP_MKIN3_MD	(97 | GPIO_ALT_FN_3_IN)
+#define GPIO98_CIF_DD_0_MD	(98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD		(98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD		(99 | GPIO_ALT_FN_3_OUT)
+#define GPIO100_KP_MKIN0_MD	(100 | GPIO_ALT_FN_1_IN)
+#define GPIO101_KP_MKIN1_MD	(101 | GPIO_ALT_FN_1_IN)
+#define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_KP_MKIN2_MD	(102 | GPIO_ALT_FN_1_IN)
+#define GPIO103_CIF_DD_3_MD	(103 | GPIO_ALT_FN_1_IN)
+#define GPIO103_KP_MKOUT0_MD	(103 | GPIO_ALT_FN_2_OUT)
+#define GPIO104_CIF_DD_2_MD	(104 | GPIO_ALT_FN_1_IN)
+#define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
+#define GPIO104_KP_MKOUT1_MD	(104 | GPIO_ALT_FN_2_OUT)
+#define GPIO105_CIF_DD_1_MD	(105 | GPIO_ALT_FN_1_IN)
+#define GPIO105_KP_MKOUT2_MD	(105 | GPIO_ALT_FN_2_OUT)
+#define GPIO106_CIF_DD_9_MD	(106 | GPIO_ALT_FN_1_IN)
+#define GPIO106_KP_MKOUT3_MD	(106 | GPIO_ALT_FN_2_OUT)
+#define GPIO107_CIF_DD_8_MD	(107 | GPIO_ALT_FN_1_IN)
+#define GPIO107_KP_MKOUT4_MD	(107 | GPIO_ALT_FN_2_OUT)
+#define GPIO108_CIF_DD_7_MD	(108 | GPIO_ALT_FN_1_IN)
+#define GPIO108_KP_MKOUT5_MD	(108 | GPIO_ALT_FN_2_OUT)
+#define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS0_MD	(110 | GPIO_ALT_FN_1_OUT)
+#define GPIO111_MMCDAT3_MD	(111 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS1_MD	(111 | GPIO_ALT_FN_1_OUT)
+#define GPIO112_MMCCMD_MD	(112 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_I2S_SYSCLK_MD	(113 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_AC97_RESET_N_MD	(113 | GPIO_ALT_FN_2_OUT)
+#define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_IN)
+#define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
+
+#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
new file mode 100644
index 00000000000..806ecfea44b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -0,0 +1,246 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ *
+ *  Taken from pxa-regs.h by Russell King
+ *
+ *  Author:	Nicolas Pitre
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+/*
+ * Memory controller
+ */
+
+#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
+#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
+#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
+#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
+#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
+#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+
+#ifdef CONFIG_PXA27x
+
+#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
+#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
+#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
+#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
+#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+#endif
+
+
+/*
+ * Power Manager
+ */
+
+#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
+#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
+
+#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
+#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
+#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
+#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
+#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
+#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
+#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
+#define PCMD0	__REG(0x40F00080 + 0 * 4)
+#define PCMD1	__REG(0x40F00080 + 1 * 4)
+#define PCMD2	__REG(0x40F00080 + 2 * 4)
+#define PCMD3	__REG(0x40F00080 + 3 * 4)
+#define PCMD4	__REG(0x40F00080 + 4 * 4)
+#define PCMD5	__REG(0x40F00080 + 5 * 4)
+#define PCMD6	__REG(0x40F00080 + 6 * 4)
+#define PCMD7	__REG(0x40F00080 + 7 * 4)
+#define PCMD8	__REG(0x40F00080 + 8 * 4)
+#define PCMD9	__REG(0x40F00080 + 9 * 4)
+#define PCMD10	__REG(0x40F00080 + 10 * 4)
+#define PCMD11	__REG(0x40F00080 + 11 * 4)
+#define PCMD12	__REG(0x40F00080 + 12 * 4)
+#define PCMD13	__REG(0x40F00080 + 13 * 4)
+#define PCMD14	__REG(0x40F00080 + 14 * 4)
+#define PCMD15	__REG(0x40F00080 + 15 * 4)
+#define PCMD16	__REG(0x40F00080 + 16 * 4)
+#define PCMD17	__REG(0x40F00080 + 17 * 4)
+#define PCMD18	__REG(0x40F00080 + 18 * 4)
+#define PCMD19	__REG(0x40F00080 + 19 * 4)
+#define PCMD20	__REG(0x40F00080 + 20 * 4)
+#define PCMD21	__REG(0x40F00080 + 21 * 4)
+#define PCMD22	__REG(0x40F00080 + 22 * 4)
+#define PCMD23	__REG(0x40F00080 + 23 * 4)
+#define PCMD24	__REG(0x40F00080 + 24 * 4)
+#define PCMD25	__REG(0x40F00080 + 25 * 4)
+#define PCMD26	__REG(0x40F00080 + 26 * 4)
+#define PCMD27	__REG(0x40F00080 + 27 * 4)
+#define PCMD28	__REG(0x40F00080 + 28 * 4)
+#define PCMD29	__REG(0x40F00080 + 29 * 4)
+#define PCMD30	__REG(0x40F00080 + 30 * 4)
+#define PCMD31	__REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC	(1<<12)
+#define PCMD_DCE	(1<<11)
+#define PCMD_LC	(1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
+				   bit 9 should be 0 all day. */
+#define PVCR_VCSA	(0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN	(0x1 << 6)
+
+#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO		(1 << 15)	/* RDH Override */
+#define PCFR_PO		(1 << 14)	/* PH Override */
+#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
+#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
+#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
+#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
+#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
+#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
+#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
+#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
+#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
+#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
+#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
+#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
+#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
+#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
+#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
+#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
+#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
+#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
+#define CKEN_USB	(11)	/* USB Unit Clock Enable */
+#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
+#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
+#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
+#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
+#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
+#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
+#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
+#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
+#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
+#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
+#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
+#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
new file mode 100644
index 00000000000..2206cb61a9f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PXA2XX_SPI_H_
+#define PXA2XX_SPI_H_
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout;
+	u8 enable_loopback;
+	void (*cs_control)(u32 command);
+};
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#endif /*PXA2XX_SPI_H_*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
new file mode 100644
index 00000000000..39eb68319e2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -0,0 +1,183 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+
+#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
+
+
+/*
+ * Service Power Management Unit (MPMU)
+ */
+#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
+#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
+#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
+#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
+#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
+#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
+#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
+#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
+#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
+
+/*
+ * Slave Power Managment Unit
+ */
+#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
+#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
+#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
+#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
+#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
+#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH		(1 << 31)
+#define ASCR_D1S		(1 << 2)
+#define ASCR_D2S		(1 << 1)
+#define ASCR_D3S		(1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR		(1 << 3)
+#define ARSR_LPMR		(1 << 2)
+#define ARSR_WDT		(1 << 1)
+#define ARSR_HWR		(1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC		(1 << 31)	/* RTC */
+#define ADXER_WOST		(1 << 30)	/* OS Timer */
+#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
+#define ADXER_WUSBH		(1 << 28)	/* USB host */
+#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
+#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
+#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
+#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
+#define ADXER_WKP		(1 << 21)	/* Keypad */
+#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
+#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
+#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
+#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
+#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
+#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
+#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
+#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
+#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
+#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
+#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
+#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
+#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
+#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
+#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
+#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
+#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2			(1 << 8)
+#define ADXR_R5			(1 << 5)
+#define ADXR_R4			(1 << 4)
+#define ADXR_R3			(1 << 3)
+#define ADXR_R2			(1 << 2)
+#define ADXR_R1			(1 << 1)
+#define ADXR_R0			(1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
+#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
+#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
+#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1	0x01
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
+#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
+#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
+#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
+#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
+#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD	1	/* < LCD Clock Enable */
+#define CKEN_USBH	2	/* < USB host clock enable */
+#define CKEN_CAMERA	3	/* < Camera interface clock enable */
+#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
+#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
+#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT	11	/* < Boot rom clock enable */
+#define CKEN_MMC1	12	/* < MMC1 Clock enable */
+#define CKEN_MMC2	13	/* < MMC2 clock enable */
+#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
+#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
+#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
+#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
+#define CKEN_TPM	19	/* < TPM clock enable */
+#define CKEN_UDC	20	/* < UDC clock enable */
+#define CKEN_BTUART	21	/* < BTUART clock enable */
+#define CKEN_FFUART	22	/* < FFUART clock enable */
+#define CKEN_STUART	23	/* < STUART clock enable */
+#define CKEN_AC97	24	/* < AC97 clock enable */
+#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1	26	/* < SSP1 clock enable */
+#define CKEN_SSP2	27	/* < SSP2 clock enable */
+#define CKEN_SSP3	28	/* < SSP3 clock enable */
+#define CKEN_SSP4	29	/* < SSP4 clock enable */
+#define CKEN_MSL0	30	/* < MSL0 clock enable */
+#define CKEN_PWM0	32	/* < PWM[0] clock enable */
+#define CKEN_PWM1	33	/* < PWM[1] clock enable */
+#define CKEN_I2C	36	/* < I2C clock enable */
+#define CKEN_INTC	38	/* < Interrupt controller clock enable */
+#define CKEN_GPIO	39	/* < GPIO clock enable */
+#define CKEN_1WIRE	40	/* < 1-wire clock enable */
+#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
+#define CKEN_MINI_IM	48	/* < Mini-IM */
+#define CKEN_MINI_LCD	49	/* < Mini LCD */
+
+#if defined(CONFIG_CPU_PXA310)
+#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
+#define CKEN_MVED	43	/* < MVED clock enable */
+#endif
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
+#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
new file mode 100644
index 00000000000..eb4b190b665
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_platform_data {
+
+	/* the data flash bus is shared between the Static Memory
+	 * Controller and the Data Flash Controller,  the arbiter
+	 * controls the ownership of the bus
+	 */
+	int	enable_arbiter;
+
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+};
+
+extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
new file mode 100644
index 00000000000..8e591118371
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -0,0 +1,153 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ *  Support for the xscale frame buffer.
+ *
+ *  Author:     Jean-Frederic Clere
+ *  Created:    Sep 22, 2003
+ *  Copyright:  jfclere@sinix.net
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ *   STN  - for passive matrix
+ *   DSTN - for dual scan passive matrix
+ *   TFT  - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit     18 : for output enable polarity
+ * bit     19 : for pixel clock edge
+ * bit     20 : for output pixel format when base is RGBT16
+ */
+#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_UNKNOWN	0
+#define LCD_TYPE_MONO_STN	1
+#define LCD_TYPE_MONO_DSTN	2
+#define LCD_TYPE_COLOR_STN	3
+#define LCD_TYPE_COLOR_DSTN	4
+#define LCD_TYPE_COLOR_TFT	5
+#define LCD_TYPE_SMART_PANEL	6
+#define LCD_TYPE_MAX		7
+
+#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH	(0 << 18)
+#define LCD_BIAS_ACTIVE_LOW	(1 << 18)
+#define LCD_PCLK_EDGE_RISE	(0 << 19)
+#define LCD_PCLK_EDGE_FALL	(1 << 19)
+#define LCD_ALTERNATE_MAPPING	(1 << 20)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_int		cmap_greyscale:1,
+			depth:8,
+			unused:23;
+
+	/* Parallel Mode Timing */
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+	 * Note:
+	 * 1. all parameters in nanosecond (ns)
+	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+	 *    in pxa27x and pxa3xx, initialize them to the same value or
+	 *    the larger one will be used
+	 * 3. same to {rd,wr}_pulse_width
+	 */
+	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
+	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
+	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
+	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+	struct pxafb_mode_info *modes;
+	unsigned int num_modes;
+
+	unsigned int	lcd_conn;
+
+	u_int		fixed_modes:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	/* The following should be defined in LCCR0
+	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
+	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
+	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
+	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
+	 *
+	 * The following should not be defined in LCCR0:
+	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+	 */
+	u_int		lccr0;
+	/* The following should be defined in LCCR3
+	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
+	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+	 *      LCCR3_Acb(X)                    AB Bias pin frequency
+	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
+	 *
+	 * The following should not be defined in LCCR3
+	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+	 */
+	u_int		lccr3;
+	/* The following should be defined in LCCR4
+	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+	 *
+	 * All other bits in LCCR4 should be left alone.
+	 */
+	u_int		lccr4;
+	void (*pxafb_backlight_power)(int);
+	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+	void (*smart_update)(struct fb_info *);
+};
+void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
new file mode 100644
index 00000000000..c689c4ea769
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -0,0 +1,180 @@
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+#include <mach/bitfield.h>
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
+#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
+#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
+#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
+#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
+#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
+#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
+#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
+#define LCSR		(0x038)	/* LCD Controller Status Register */
+#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
+#define TMEDCR		(0x044)	/* TMED Control Register */
+
+#define CMDCR		(0x100)	/* Command Control Register */
+#define PRSR		(0x104)	/* Panel Read Status Register */
+
+#define LCCR3_1BPP	(0 << 24)
+#define LCCR3_2BPP	(1 << 24)
+#define LCCR3_4BPP	(2 << 24)
+#define LCCR3_8BPP	(3 << 24)
+#define LCCR3_16BPP	(4 << 24)
+#define LCCR3_18BPP	(5 << 24)
+#define LCCR3_18BPP_P	(6 << 24)
+#define LCCR3_19BPP	(7 << 24)
+#define LCCR3_19BPP_P	(1 << 29)
+#define LCCR3_24BPP	((1 << 29) | (1 << 24))
+#define LCCR3_25BPP	((1 << 29) | (2 << 24))
+
+#define LCCR3_PDFOR_0	(0 << 30)
+#define LCCR3_PDFOR_1	(1 << 30)
+#define LCCR3_PDFOR_2	(2 << 30)
+#define LCCR3_PDFOR_3	(3 << 30)
+
+#define LCCR4_PAL_FOR_0	(0 << 15)
+#define LCCR4_PAL_FOR_1	(1 << 15)
+#define LCCR4_PAL_FOR_2	(2 << 15)
+#define LCCR4_PAL_FOR_MASK	(3 << 15)
+
+#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
+#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
+#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
+#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
+#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
+#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
+#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
+
+#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
+#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
+#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
+
+#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
+#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
+#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
+#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
+#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
+#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
+#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
+#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
+#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
+#define LCCR0_PDD_S	12
+#define LCCR0_BM	(1 << 20)	/* Branch mask */
+#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
+#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
+#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
+#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
+#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
+
+#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S	16
+#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
+#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
+#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
+
+#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
+
+#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
+#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
+
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
+
+#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
+#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+#define LCSR_RD_ST	(1 << 11)	/* read status */
+#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
+/* smartpanel related */
+#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
+#define PRSR_A0		(1 << 8)	/* Read Data Source */
+#define PRSR_ST_OK	(1 << 9)	/* Status OK */
+#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
+
+#define SMART_CMD_A0			 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
+#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
+#define SMART_CMD_NOOP			 (0x4 << 9)
+#define SMART_CMD_INTERRUPT		 (0x5 << 9)
+
+#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
new file mode 100644
index 00000000000..3c04cde2cf1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -0,0 +1,127 @@
+#ifndef __ASM_ARCH_REGS_SSP_H
+#define __ASM_ARCH_REGS_SSP_H
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0		(0x00)  /* SSP Control Register 0 */
+#define SSCR1		(0x04)  /* SSP Control Register 1 */
+#define SSSR		(0x08)  /* SSP Status Register */
+#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
+#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
+
+#define SSTO		(0x28)  /* SSP Time Out Register */
+#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
+#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
+#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
+#define SSTSS		(0x38)  /* SSP Timeslot Status */
+#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
+
+#if defined(CONFIG_PXA3xx)
+#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
+#endif
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
+#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
+#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National	(0x2 << 4)	/* National Microwire */
+#define SSCR0_ECS	(1 << 6)	/* External clock select */
+#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+
+#if defined(CONFIG_PXA25x)
+#define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+
+#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
+#define SSCR0_NCS	(1 << 21)	/* Network clock select */
+#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
+#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
+#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
+#endif
+
+#if defined(CONFIG_PXA3xx)
+#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
+#endif
+
+#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
+#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
+#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
+#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
+#define SSSR_BSY	(1 << 4)	/* SSP Busy */
+#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
+#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
+#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+
+#define SSCR0_TIM		(1 << 23)	/* Transmit FIFO Under Run Interrupt Mask */
+#define SSCR0_RIM		(1 << 22)	/* Receive FIFO Over Run interrupt Mask */
+#define SSCR0_NCS		(1 << 21)	/* Network Clock Select */
+#define SSCR0_EDSS		(1 << 20)	/* Extended Data Size Select */
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
+#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
+#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
+#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
+#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
+#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
+#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
+#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
+#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
+#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
+#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
+#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
+#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
+
+#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
+#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
+#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
+#define SSSR_EOC		(1 << 20)	/* End Of Chain */
+#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
+#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
+
+#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
+#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
+#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
+#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
+#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
+#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
+
+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#if defined(CONFIG_PXA3xx)
+#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+#endif
+
+
+#endif /* __ASM_ARCH_REGS_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
new file mode 100644
index 00000000000..9489a48871a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Low Power/Sleep Exit */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+extern void clear_reset_status(unsigned int mask);
+
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
new file mode 100644
index 00000000000..3b1d4a72d4d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/sharpsl.h
@@ -0,0 +1,34 @@
+/*
+ * SharpSL SSP Driver
+ */
+
+unsigned long corgi_ssp_ads7846_putget(unsigned long);
+unsigned long corgi_ssp_ads7846_get(void);
+void corgi_ssp_ads7846_put(unsigned long data);
+void corgi_ssp_ads7846_lock(void);
+void corgi_ssp_ads7846_unlock(void);
+void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
+void corgi_ssp_blduty_set(int duty);
+int corgi_ssp_max1111_get(unsigned long data);
+
+/*
+ * SharpSL Touchscreen Driver
+ */
+
+struct corgits_machinfo {
+	unsigned long (*get_hsync_invperiod)(void);
+	void (*put_hsync)(void);
+	void (*wait_hsync)(void);
+};
+
+
+/*
+ * SharpSL Backlight
+ */
+extern void corgibl_limit_intensity(int limit);
+
+
+/*
+ * SharpSL Battery/PM Driver
+ */
+extern void sharpsl_battery_kick(void);
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
new file mode 100644
index 00000000000..bd14365f7ed
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -0,0 +1,158 @@
+/*
+ * Hardware specific definitions for SL-Cx000 series of PDAs
+ *
+ * Copyright (c) 2005 Alexander Wykes
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_SPITZ_H
+#define __ASM_ARCH_SPITZ_H  1
+#endif
+
+#include <linux/fb.h>
+
+/* Spitz/Akita GPIOs */
+
+#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
+#define SPITZ_GPIO_RESET           (1)
+#define SPITZ_GPIO_nSD_DETECT      (9)
+#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
+#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
+#define SPITZ_GPIO_ADS7846_CS      (14)
+#define SPITZ_GPIO_SYNC            (16)
+#define SPITZ_GPIO_MAX1111_CS      (20)
+#define SPITZ_GPIO_FATAL_BAT       (21)
+#define SPITZ_GPIO_HSYNC           (22)
+#define SPITZ_GPIO_nSD_CLK         (32)
+#define SPITZ_GPIO_USB_DEVICE      (35)
+#define SPITZ_GPIO_USB_HOST        (37)
+#define SPITZ_GPIO_USB_CONNECT     (41)
+#define SPITZ_GPIO_LCDCON_CS       (53)
+#define SPITZ_GPIO_nPCE            (54)
+#define SPITZ_GPIO_nSD_WP          (81)
+#define SPITZ_GPIO_ON_RESET        (89)
+#define SPITZ_GPIO_BAT_COVER       (90)
+#define SPITZ_GPIO_CF_CD           (94)
+#define SPITZ_GPIO_ON_KEY          (95)
+#define SPITZ_GPIO_SWA             (97)
+#define SPITZ_GPIO_SWB             (96)
+#define SPITZ_GPIO_CHRG_FULL       (101)
+#define SPITZ_GPIO_CO              (101)
+#define SPITZ_GPIO_CF_IRQ          (105)
+#define SPITZ_GPIO_AC_IN           (115)
+#define SPITZ_GPIO_HP_IN           (116)
+
+/* Spitz Only GPIOs */
+
+#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
+#define SPITZ_GPIO_CF2_CD          (93)
+
+
+/* Spitz/Akita Keyboard Definitions */
+
+#define SPITZ_KEY_STROBE_NUM         (11)
+#define SPITZ_KEY_SENSE_NUM          (7)
+#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
+#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
+#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
+#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
+#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
+#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
+#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
+#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
+
+#define SPITZ_GPIO_KEY_STROBE0       88
+#define SPITZ_GPIO_KEY_STROBE1       23
+#define SPITZ_GPIO_KEY_STROBE2       24
+#define SPITZ_GPIO_KEY_STROBE3       25
+#define SPITZ_GPIO_KEY_STROBE4       26
+#define SPITZ_GPIO_KEY_STROBE5       27
+#define SPITZ_GPIO_KEY_STROBE6       52
+#define SPITZ_GPIO_KEY_STROBE7       103
+#define SPITZ_GPIO_KEY_STROBE8       107
+#define SPITZ_GPIO_KEY_STROBE9       108
+#define SPITZ_GPIO_KEY_STROBE10      114
+
+#define SPITZ_GPIO_KEY_SENSE0        12
+#define SPITZ_GPIO_KEY_SENSE1        17
+#define SPITZ_GPIO_KEY_SENSE2        91
+#define SPITZ_GPIO_KEY_SENSE3        34
+#define SPITZ_GPIO_KEY_SENSE4        36
+#define SPITZ_GPIO_KEY_SENSE5        38
+#define SPITZ_GPIO_KEY_SENSE6        39
+
+
+/* Spitz Scoop Device (No. 1) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
+#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
+#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
+#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
+#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
+#define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_SUS_SET     0
+
+/* Spitz Scoop Device (No. 2) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
+#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
+#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+
+#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+#define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+
+
+/* Spitz IRQ Definitions */
+
+#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device spitzscoop_device;
+extern struct platform_device spitzscoop2_device;
+extern struct platform_device spitzssp_device;
+extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
new file mode 100644
index 00000000000..a012882c9ee
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -0,0 +1,83 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver supports the following PXA CPU/SSP ports:-
+ *
+ *       PXA250     SSP
+ *       PXA255     SSP, NSSP
+ *       PXA26x     SSP, NSSP, ASSP
+ *       PXA27x     SSP1, SSP2, SSP3
+ *       PXA3xx     SSP1, SSP2, SSP3, SSP4
+ */
+
+#ifndef __ASM_ARCH_SSP_H
+#define __ASM_ARCH_SSP_H
+
+#include <linux/list.h>
+
+enum pxa_ssp_type {
+	SSP_UNDEFINED = 0,
+	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+	PXA27x_SSP,
+};
+
+struct ssp_device {
+	struct platform_device *pdev;
+	struct list_head	node;
+
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+	unsigned long	phys_base;
+
+	const char	*label;
+	int		port_id;
+	int		type;
+	int		use_count;
+	int		irq;
+	int		drcmr_rx;
+	int		drcmr_tx;
+};
+
+/*
+ * SSP initialisation flags
+ */
+#define SSP_NO_IRQ	0x1		/* don't register an irq handler in SSP driver */
+
+struct ssp_state {
+	u32	cr0;
+	u32 cr1;
+	u32 to;
+	u32 psp;
+};
+
+struct ssp_dev {
+	struct ssp_device *ssp;
+	u32 port;
+	u32 mode;
+	u32 flags;
+	u32 psp_flags;
+	u32 speed;
+	int irq;
+};
+
+int ssp_write_word(struct ssp_dev *dev, u32 data);
+int ssp_read_word(struct ssp_dev *dev, u32 *data);
+int ssp_flush(struct ssp_dev *dev);
+void ssp_enable(struct ssp_dev *dev);
+void ssp_disable(struct ssp_dev *dev);
+void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
+void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
+int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
+void ssp_exit(struct ssp_dev *dev);
+
+struct ssp_device *ssp_request(int port, const char *label);
+void ssp_free(struct ssp_device *);
+#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
new file mode 100644
index 00000000000..0f381e69299
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pxa/include/mach/system.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/proc-fns.h>
+#include "hardware.h"
+#include "pxa2xx-regs.h"
+#include "pxa-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+
+void arch_reset(char mode);
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
new file mode 100644
index 00000000000..b05fc6683c4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-pxa/include/mach/timex.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#if defined(CONFIG_PXA25x)
+/* PXA250/210 timer base */
+#define CLOCK_TICK_RATE 3686400
+#elif defined(CONFIG_PXA27x)
+/* PXA27x timer base */
+#ifdef CONFIG_MACH_MAINSTONE
+#define CLOCK_TICK_RATE 3249600
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
new file mode 100644
index 00000000000..a72803f0461
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -0,0 +1,198 @@
+/*
+ * Hardware specific definitions for Sharp SL-C6000x series of PDAs
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_ARCH_TOSA_H_
+#define _ASM_ARCH_TOSA_H_ 1
+
+/*  TOSA Chip selects  */
+#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
+/* Internel Scoop */
+#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
+/* Jacket Scoop */
+#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
+
+/*
+ * SCOOP2 internal GPIOs
+ */
+#define TOSA_SCOOP_GPIO_BASE		NR_BUILTIN_GPIO
+#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
+#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
+#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
+#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
+#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
+#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
+#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
+#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
+#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
+
+/* GPIO Direction   1 : output mode / 0:input mode */
+#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
+		TOSA_SCOOP_AUD_PWR_ON)
+
+/*
+ * SCOOP2 jacket GPIOs
+ */
+#define TOSA_SCOOP_JC_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
+#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
+#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
+#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
+#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
+#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
+#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
+#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
+#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
+
+/* GPIO Direction   1 : output mode / 0:input mode */
+#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
+
+/*
+ * TC6393XB GPIOs
+ */
+#define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
+#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
+
+#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
+#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
+#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
+#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
+#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
+#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
+#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
+#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
+#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
+#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
+#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
+#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
+
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 			0x00
+#define TG_TPOSCTL 			0x01
+#define TG_DUTYCTL 			0x02
+#define TG_GPOSR 			0x03
+#define TG_GPODR1 			0x04
+#define TG_GPODR2 			0x05
+#define TG_PINICTL 			0x06
+#define TG_HPOSCTL 			0x07
+
+/*
+ * PXA GPIOs
+ */
+#define TOSA_GPIO_POWERON		(0)
+#define TOSA_GPIO_RESET			(1)
+#define TOSA_GPIO_AC_IN			(2)
+#define TOSA_GPIO_RECORD_BTN		(3)
+#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
+#define TOSA_GPIO_USB_IN		(5)
+#define TOSA_GPIO_JACKET_DETECT		(7)
+#define TOSA_GPIO_nSD_DETECT		(9)
+#define TOSA_GPIO_nSD_INT		(10)
+#define TOSA_GPIO_TC6393XB_CLK		(11)
+#define TOSA_GPIO_BAT1_CRG		(12)
+#define TOSA_GPIO_CF_CD			(13)
+#define TOSA_GPIO_BAT0_CRG		(14)
+#define TOSA_GPIO_TC6393XB_INT		(15)
+#define TOSA_GPIO_BAT0_LOW		(17)
+#define TOSA_GPIO_TC6393XB_RDY		(18)
+#define TOSA_GPIO_ON_RESET		(19)
+#define TOSA_GPIO_EAR_IN		(20)
+#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
+#define TOSA_GPIO_ON_KEY		(22)
+#define TOSA_GPIO_VGA_LINE		(27)
+#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
+#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
+#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
+#define TOSA_GPIO_IRDA_TX		(47)
+#define TOSA_GPIO_TG_SPI_SCLK		(81)
+#define TOSA_GPIO_TG_SPI_CS		(82)
+#define TOSA_GPIO_TG_SPI_MOSI		(83)
+#define TOSA_GPIO_BAT1_LOW		(84)
+
+#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
+
+#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
+
+#define TOSA_KEY_STROBE_NUM		(11)
+#define TOSA_KEY_SENSE_NUM		(7)
+
+#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
+#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
+#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
+#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
+#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
+#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
+#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
+#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
+#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
+#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
+#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
+
+/*
+ * Interrupts
+ */
+#define TOSA_IRQ_GPIO_WAKEUP        	IRQ_GPIO(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN         	IRQ_GPIO(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN    	IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC          	IRQ_GPIO(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN        	IRQ_GPIO(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT 	IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT       	IRQ_GPIO(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT    	IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393XB_INT    	IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY        	IRQ_GPIO(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE      	IRQ_GPIO(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT        	IRQ_GPIO(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ     	IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED    	IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW      	IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	IRQ_GPIO(69+(a))
+
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+
+#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
+
+#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
+#define TOSA_KEY_RECORD		KEY_YEN
+#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
+#define TOSA_KEY_CANCEL		KEY_ESC
+#define TOSA_KEY_CENTER		KEY_HIRAGANA
+#define TOSA_KEY_OK		KEY_HENKAN
+#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
+#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
+#define TOSA_KEY_LIGHT		KEY_MUHENKAN
+#define TOSA_KEY_MENU		KEY_HANJA
+#define TOSA_KEY_FN		KEY_RIGHTALT
+#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
+#else
+#define TOSA_KEY_RECORD		KEY_RECORD
+#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
+#define TOSA_KEY_CANCEL		KEY_CANCEL
+#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
+#define TOSA_KEY_OK		KEY_OK
+#define TOSA_KEY_CALENDAR	KEY_CALENDAR
+#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
+#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
+#define TOSA_KEY_MENU		KEY_MENU
+#define TOSA_KEY_FN		KEY_FN
+#define TOSA_KEY_MAIL		KEY_MAIL
+#endif
+
+#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h
new file mode 100644
index 00000000000..efc3c3d3b75
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa_bt.h
@@ -0,0 +1,22 @@
+/*
+ * Tosa bluetooth built-in chip control.
+ *
+ * Later it may be shared with some other platforms.
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef TOSA_BT_H
+#define TOSA_BT_H
+
+struct tosa_bt_data {
+	int gpio_pwr;
+	int gpio_reset;
+};
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
new file mode 100644
index 00000000000..641d0ec110b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -0,0 +1,106 @@
+/************************************************************************
+ * Include file for TRIZEPS4 SoM and ConXS eval-board
+ * Copyright (c) Jürgen Schindele
+ * 2006
+ ************************************************************************/
+
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS4_H_
+#define _TRIPEPS4_H_
+
+/* physical memory regions */
+#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
+#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
+#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
+
+#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)			/* Logic chip on ConXS-Board CSFR register */
+#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)	/* Logic chip on ConXS-Board BOCR register */
+#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)	/* Logic chip on ConXS-Board IRCR register*/
+#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)	/* Logic chip on ConXS-Board UPSR register*/
+#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)	/* Logic chip on ConXS-Board DICR register*/
+
+/* virtual memory regions */
+#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
+
+#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
+#define TRIZEPS4_CFSR_VIRT	0xF0100000
+#define TRIZEPS4_BOCR_VIRT	0xF0200000
+#define TRIZEPS4_DICR_VIRT	0xF0300000
+#define TRIZEPS4_IRCR_VIRT	0xF0400000
+#define TRIZEPS4_UPSR_VIRT	0xF0500000
+
+/* size of flash */
+#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000		101
+#define TRIZEPS4_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+
+/* UCB1400 audio / TS-controller */
+#define GPIO_UCB1400		1
+#define TRIZEPS4_UCB1400_IRQ	IRQ_GPIO(GPIO_UCB1400)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD		11		/* PCMCIA Card Detect */
+#define TRIZEPS4_CD_IRQ		IRQ_GPIO(GPIO_PCD)
+#define GPIO_PRDY		13		/* READY / nINT */
+#define TRIZEPS4_READY_NINT	IRQ_GPIO(GPIO_PRDY)
+
+/* MMC socket */
+#define GPIO_MMC_DET		12
+#define TRIZEPS4_MMC_IRQ	IRQ_GPIO(GPIO_MMC_DET)
+
+/* LEDS using tx2 / rx2 */
+#define GPIO_SYS_BUSY_LED	46
+#define GPIO_HEARTBEAT_LED	47
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC		0
+#define TRIZEPS4_PIC_IRQ	IRQ_GPIO(GPIO_PIC)
+
+#define CFSR_P2V(x)		((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x)		((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+
+#define BCR_P2V(x)		((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x)		((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+
+#define DCR_P2V(x)		((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x)		((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#ifndef __ASSEMBLY__
+#define ConXS_CFSR		(*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
+#define ConXS_BCR		(*((volatile unsigned short *)BCR_P2V(0x0E000000)))
+#define ConXS_DCR		(*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+#else
+#define ConXS_CFSR		CFSR_P2V(0x0C000000)
+#define ConXS_BCR		BCR_P2V(0x0E000000)
+#define ConXS_DCR		DCR_P2V(0x0F800000)
+#endif
+
+#define ConXS_CFSR_BVD_MASK	0x0003
+#define ConXS_CFSR_BVD1		(1 << 0)
+#define ConXS_CFSR_BVD2		(1 << 1)
+#define ConXS_CFSR_VS_MASK	0x000C
+#define ConXS_CFSR_VS1		(1 << 2)
+#define ConXS_CFSR_VS2		(1 << 3)
+#define ConXS_CFSR_VS_5V	(0x3 << 2)
+#define ConXS_CFSR_VS_3V3	0x0
+
+#define ConXS_BCR_S0_POW_EN0	(1 << 0)
+#define ConXS_BCR_S0_POW_EN1	(1 << 1)
+#define ConXS_BCR_L_DISP	(1 << 4)
+#define ConXS_BCR_CF_BUF_EN	(1 << 5)
+#define ConXS_BCR_CF_RESET	(1 << 7)
+#define ConXS_BCR_S0_VCC_3V3	0x1
+#define ConXS_BCR_S0_VCC_5V0	0x2
+#define ConXS_BCR_S0_VPP_12V	0x4
+#define ConXS_BCR_S0_VPP_3V3	0x8
+
+#define ConXS_IRCR_MODE		(1 << 0)
+#define ConXS_IRCR_SD		(1 << 1)
+
+#endif /* _TRIPEPS4_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h
new file mode 100644
index 00000000000..2f82332e81a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-pxa/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
new file mode 100644
index 00000000000..21e3e890af9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-pxa/include/mach/uncompress.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#define __REG(x)       ((volatile unsigned long *)x)
+
+static volatile unsigned long *UART = FFUART;
+
+static inline void putc(char c)
+{
+	if (!(UART[UART_IER] & IER_UUE))
+		return;
+	while (!(UART[UART_LSR] & LSR_TDRQ))
+		barrier();
+	UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_littleton())
+		UART = STUART;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
new file mode 100644
index 00000000000..e90c5eeb81d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-pxa/include/mach/vmalloc.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
new file mode 100644
index 00000000000..0d35ca04731
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define ZYLONITE_ETH_PHYS	0x14000000
+
+#define EXT_GPIO(x)		(128 + (x))
+
+/* the following variables are processor specific and initialized
+ * by the corresponding zylonite_pxa3xx_init()
+ */
+struct platform_mmc_slot {
+	int gpio_cd;
+	int gpio_wp;
+};
+
+extern struct platform_mmc_slot zylonite_mmc_slot[];
+
+extern int gpio_eth_irq;
+extern int gpio_debug_led1;
+extern int gpio_debug_led2;
+
+extern int wm9713_irq;
+
+extern int lcd_id;
+extern int lcd_orientation;
+
+#ifdef CONFIG_CPU_PXA300
+extern void zylonite_pxa300_init(void);
+#else
+static inline void zylonite_pxa300_init(void)
+{
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
+}
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+extern void zylonite_pxa320_init(void);
+#else
+static inline void zylonite_pxa320_init(void)
+{
+	if (cpu_is_pxa320())
+		panic("%s: PXA320 not supported\n", __FUNCTION__);
+}
+#endif
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fbff557bb22..5e95c5372fe 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,10 +17,10 @@
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 38aa9270540..18b20d46941 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -14,12 +14,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/idp.h>
+#include <mach/pxa-regs.h>
+#include <mach/idp.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index afbc6698e27..1a258029c33 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -13,11 +13,11 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 065293eb0d8..95e06b84963 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -12,12 +12,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
index 21880daabaf..3bc29007df3 100644
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -12,14 +12,14 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/types.h>
 #include <asm/leds.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb..58f3402a037 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,25 +20,27 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/littleton.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/ssp.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+#include <mach/littleton.h>
 
 #include "generic.h"
 
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &littleton_smc91x_info,
+	},
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)		((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+	pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
 
 	littleton_init_lcd();
 	littleton_init_keypad();
+	littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index cc1c4fa0614..b7038948d1d 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -29,7 +29,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -38,15 +38,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/lpd270.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/lpd270.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a3fae413920..4ffdff2d9ff 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,15 +21,16 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,17 +41,18 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/lubbock.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long lubbock_pin_config[] __initdata = {
@@ -151,7 +153,7 @@ static void __init lubbock_init_irq(void)
 	}
 
 	set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -223,15 +225,7 @@ static struct platform_device sa1111_device = {
  * for the temperature sensors.
  */
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 0,
-};
-
-static struct platform_device pxa_ssp = {
-	.name		= "pxa2xx-spi",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &pxa_ssp_master_info,
-	},
+	.num_chipselect	= 1,
 };
 
 static int lubbock_ads7846_pendown_state(void)
@@ -292,11 +286,18 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &lubbock_smc91x_info,
+	},
 };
 
 static struct resource flash_resources[] = {
@@ -367,7 +368,6 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
-	&pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -471,6 +471,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		LUB_MISC_WR |= 1 << 4;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	local_irq_restore(flags);
 }
 
@@ -485,6 +486,7 @@ static void __init lubbock_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 
+	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
@@ -501,6 +503,7 @@ static void __init lubbock_init(void)
 	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 01b2fa79021..143f28adaf9 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,34 +17,32 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/magician.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/magician.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
 	/* SDRAM and Static Memory I/O Signals */
 	GPIO20_nSDCS_2,
@@ -134,6 +132,7 @@ static unsigned long magician_pin_config[] = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
@@ -399,6 +398,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 
 static struct platform_device backlight = {
 	.name = "pwm-backlight",
+	.id   = -1,
 	.dev  = {
 		.parent        = &pxa27x_device_pwm0.dev,
 		.platform_data = &backlight_data,
@@ -511,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+	ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+	if (ret)
+		goto err_chg_en;
+	ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+	if (!ret)
+		ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+	if (ret)
+		goto err_nchg_en;
+
+	return 0;
+
+err_nchg_en:
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+	return ret;
+}
+
 static int magician_is_ac_online(void)
 {
 	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -527,14 +558,24 @@ static void magician_set_charge(int flags)
 	gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
 	"ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
 	.is_ac_online    = magician_is_ac_online,
 	.is_usb_online   = magician_is_usb_online,
 	.set_charge      = magician_set_charge,
+	.exit            = power_supply_exit,
 	.supplied_to     = magician_supplicants,
 	.num_supplicants = ARRAY_SIZE(magician_supplicants),
 };
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2e9e7c4da8..d44af761564 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,12 +26,13 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,17 +41,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/mainstone.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
-	GPIO93_KP_DKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO94_KP_DKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO95_KP_DKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO93_KP_DKIN_0,
+	GPIO94_KP_DKIN_1,
+	GPIO95_KP_DKIN_2,
 	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
@@ -190,7 +191,7 @@ static void __init mainstone_init_irq(void)
 	MST_INTSETCLR = 0;
 
 	set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &mainstone_smc91x_info,
+	},
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -455,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
 	} else {
@@ -513,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.init		= mainstone_ohci_init,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
 	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index d1cdb4ecb0b..925575f10ac 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,10 +18,10 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
 
 #include "generic.h"
 
@@ -39,6 +39,28 @@ struct gpio_desc {
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
 
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+	unsigned mask = GPIO_bit(gpio);
+
+	/* low power state */
+	switch (lpm) {
+	case MFP_LPM_DRIVE_HIGH:
+		PGSR(gpio) |= mask;
+		break;
+	case MFP_LPM_DRIVE_LOW:
+		PGSR(gpio) &= ~mask;
+		break;
+	case MFP_LPM_INPUT:
+		break;
+	default:
+		pr_warning("%s: invalid low power state for GPIO%d\n",
+				__func__, gpio);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
 	unsigned long gafr, mask = GPIO_bit(gpio);
@@ -57,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	else
 		GPDR(gpio) &= ~mask;
 
-	/* low power state */
-	switch (c & MFP_LPM_STATE_MASK) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(gpio) |= mask;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(gpio) &= ~mask;
-		break;
-	case MFP_LPM_INPUT:
-		break;
-	default:
-		pr_warning("%s: invalid low power state for GPIO%d\n",
-				__func__, gpio);
+	if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
 		return -EINVAL;
-	}
 
 	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
 	 * configurations of those pins not able to wakeup
@@ -91,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+	int gpio = mfp_to_gpio(mfp);
+
+	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+		return -1;
+	}
+
+	return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
 	unsigned long flags;
@@ -99,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
 	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-		gpio = mfp_to_gpio(MFP_PIN(*c));
-
-		if (!gpio_desc[gpio].valid) {
-			pr_warning("%s: GPIO%d is invalid pin\n",
-				__func__, gpio);
+		gpio = __mfp_validate(MFP_PIN(*c));
+		if (gpio < 0)
 			continue;
-		}
 
 		local_irq_save(flags);
 
@@ -116,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 	}
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+	unsigned long flags;
+	int gpio;
+
+	gpio = __mfp_validate(mfp);
+	if (gpio < 0)
+		return;
+
+	local_irq_save(flags);
+	__mfp_config_lpm(gpio, lpm);
+	local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
 	struct gpio_desc *d;
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 3a5b0fcbaf1..eb197a6e8e9 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-#include <asm/arch/pxa3xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/pxa3xx-regs.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 00000000000..fe924a23deb
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,416 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Alex Osborne <ato@meshy.org>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO13_GPIO,
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		return err;
+	}
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+	if (err)
+		goto pwr_err;
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto ro_err;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+ro_err:
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmtx_mci_power,
+	.get_ro		= palmtx_mci_get_ro,
+	.init 		= palmtx_mci_init,
+	.exit		= palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmtx_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+	.buttons	= palmtx_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtx_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMTX_MAX_INTENSITY,
+	.dft_brightness	= PALMTX_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTX_PERIOD_NS,
+	.init		= palmtx_backlight_init,
+	.notify		= palmtx_backlight_notify,
+	.exit		= palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmtx_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+	udelay(50);
+	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.udc_command		= palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+
+	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+
+	return 0;
+
+err_cs_usb:
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+	return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmtx_is_ac_online,
+	.is_usb_online   = palmtx_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmtx_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+	.modes		= palmtx_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmtx_pxa_keys,
+#endif
+	&palmtx_backlight,
+	&power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+	.virtual	= PALMTX_PCMCIA_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+	.length		= PALMTX_PCMCIA_SIZE,
+	.type		= MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+	set_pxa_fb_info(&palmtx_lcd_screen);
+	pxa_set_mci_info(&palmtx_mci_platform_data);
+	pxa_set_udc_info(&palmtx_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtx_ficp_platform_data);
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+	.phys_io	= PALMTX_PHYS_IO_START,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= palmtx_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb0aee..730b9f6ede1 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,15 +24,17 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/pcm027.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pcm027.h>
 #include "generic.h"
 
 /*
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+	.base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "max7301",
+		.platform_data	= &max7301_info,
+		.max_speed_hz	= 13000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
 	.width  = 4,
 };
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
 	pcm990_baseboard_init();
 #endif
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 5d87c7c866e..420c9b3813f 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -22,25 +22,40 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/ide.h>
 #include <linux/i2c.h>
 #include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/camera.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pcm990_baseboard.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pcm990_baseboard.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa27x.h>
 
 #include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	/* USB */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	/* PWM0 */
+	GPIO16_PWM0_OUT,
+};
 
 /*
  * pcm990_lcd_power - control power supply to the LCD
@@ -277,16 +292,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
 	int err;
 
-	/*
-	 * enable GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
 	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
 			     "MMC card detect", data);
 	if (err)
@@ -333,8 +338,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-	pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-	pxa_gpio_mode(PCM990_USB_PWR_EN);
 	/*
 	 * disable USB port 2 and 3
 	 * power sense is active low
@@ -361,23 +364,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+	/* CIF */
+	GPIO98_CIF_DD_0,
+	GPIO105_CIF_DD_1,
+	GPIO104_CIF_DD_2,
+	GPIO103_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO94_CIF_DD_5,
+	GPIO93_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+	GPIO107_CIF_DD_8,
+	GPIO106_CIF_DD_9,
+	GPIO42_CIF_MCLK,
+	GPIO45_CIF_PCLK,
+	GPIO43_CIF_FV,
+	GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-	pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-	pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-	pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-	pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-	pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-	pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-	pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-	pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-	pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-	pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-	pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-	pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-	pxa_gpio_mode(GPIO43_CIF_FV_MD);
-	pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	return 0;
 }
 
@@ -449,8 +456,10 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
 	/* register CPLD access */
-	iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
@@ -458,7 +467,6 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
 	set_pxa_fb_info(&pcm990_fbinfo);
 #endif
-	pxa_gpio_mode(GPIO16_PWM0_MD);
 	platform_device_register(&pcm990_backlight_device);
 
 	/* MMC */
@@ -473,9 +481,8 @@ void __init pcm990_baseboard_init(void)
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-	i2c_register_board_info(0, pcm990_i2c_devices,
-		ARRAY_SIZE(pcm990_i2c_devices));
+	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-	printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 7d4debbdcca..1b539e67557 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,12 +16,12 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 #include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f81c10cafd4..3f5f484549b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -21,7 +21,7 @@
 #include <linux/pm.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -31,16 +31,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/poodle.h>
+#include <mach/pxafb.h>
+#include <mach/sharpsl.h>
+#include <mach/ssp.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -267,6 +268,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
 	} else {
 		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
@@ -386,6 +388,7 @@ static void __init poodle_init(void)
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &poodle_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index ce28cd9fed1..316cd986da5 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,7 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 4cd50e3005e..305452b56e9 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,13 +23,14 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
 	.getrate	= clk_pxa25x_lcd_getrate,
 };
 
+static unsigned long gpio12_config_32k[] = {
+	GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+	GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+	.enable         = clk_gpio12_enable,
+	.disable        = clk_gpio12_disable,
+};
+
+static unsigned long gpio11_config_3m6[] = {
+	GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+	GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+	.enable         = clk_gpio11_enable,
+	.disable        = clk_gpio11_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -119,8 +166,7 @@ static struct clk pxa25x_hwuart_clk =
 ;
 
 /*
- * PXA 2xx clock declarations. Order is important (see aliases below)
- * Please be careful not to disrupt the ordering.
+ * PXA 2xx clock declarations.
  */
 static struct clk pxa25x_clks[] = {
 	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
@@ -128,6 +174,8 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
 	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
 	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+	INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
+	INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
 
@@ -145,8 +193,6 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
-static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
-
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -293,10 +339,13 @@ static int __init pxa25x_init(void)
 	int i, ret = 0;
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa255())
 		clks_register(&pxa25x_hwuart_clk, 1);
 
 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
 
 		if ((ret = pxa_init_dma(16)))
@@ -317,11 +366,9 @@ static int __init pxa25x_init(void)
 	}
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa255())
 		ret = platform_device_register(&pxa_device_hwuart);
 
-	clks_register(&gpio7_clk, 1);
-
 	return ret;
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d5d14ea33f2..f9f6a9c31f4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -18,16 +18,17 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/i2c.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -384,6 +385,9 @@ static int __init pxa27x_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa27x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
 
 		if ((ret = pxa_init_dma(32)))
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index d4f6415e841..73d04d81c75 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -14,9 +14,18 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 
-#include <asm/arch/mfp-pxa2xx.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+
+void pxa2xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with RCSR */
+	RCSR = mask;
+}
 
 static unsigned long pxa2xx_mfp_fir[] = {
 	GPIO46_FICP_RXD,
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d3877f21..9adc7fc4618 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,9 +15,15 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp-pxa300.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
 
 static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
@@ -79,15 +85,28 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct clk common_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
+static struct clk pxa310_clks[] = {
+#ifdef CONFIG_CPU_PXA310
+	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+#endif
+};
+
 static int __init pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(common_clks));
 	}
 
-	if (cpu_is_pxa310())
+	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa310_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb8f8d..016eb18f01a 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,10 +15,16 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa320.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
 
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
@@ -74,16 +80,17 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static void __init pxa320_init_mfp(void)
-{
-	pxa3xx_init_mfp();
-	pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
+static struct clk pxa320_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
 
 static int __init pxa320_init(void)
 {
-	if (cpu_is_pxa320())
-		pxa320_init_mfp();
+	if (cpu_is_pxa320()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa320_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 15685d2b8f8..03cbc38103e 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,12 +22,13 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/ssp.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/ssp.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,12 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void)
 	return (clk / 10000);
 }
 
+void pxa3xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
+	ARSR = mask;
+}
+
 /*
  * Return the current AC97 clock frequency.
  */
@@ -144,7 +151,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
 	return hsio_clk;
 }
 
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -154,7 +161,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
 		CKENB |= mask;
 }
 
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -164,7 +171,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
 		CKENB &= ~mask;
 }
 
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
 	.enable		= clk_pxa3xx_cken_enable,
 	.disable	= clk_pxa3xx_cken_disable,
 };
@@ -196,24 +203,6 @@ static const struct clkops clk_pout_ops = {
 	.disable	= clk_pout_disable,
 };
 
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= _ops,				\
-		.cken	= CKEN_##_cken,			\
-	}
-
 static struct clk pxa3xx_clks[] = {
 	{
 		.name           = "CLK_POUT",
@@ -244,7 +233,6 @@ static struct clk pxa3xx_clks[] = {
 
 	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
 	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
 
 #ifdef CONFIG_PM
@@ -551,6 +539,9 @@ static int __init pxa3xx_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa3xx()) {
+
+		reset_status = ARSR;
+
 		/*
 		 * clear RDH bit every time after reset
 		 *
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 00000000000..13e6bfdfff6
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <mach/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR(GPIO0, 0x02e0),
+	MFP_ADDR(GPIO1, 0x02dc),
+	MFP_ADDR(GPIO2, 0x02e8),
+	MFP_ADDR(GPIO3, 0x02d8),
+	MFP_ADDR(GPIO4, 0x02e4),
+	MFP_ADDR(GPIO5, 0x02ec),
+	MFP_ADDR(GPIO6, 0x02f8),
+	MFP_ADDR(GPIO7, 0x02fc),
+	MFP_ADDR(GPIO8, 0x0300),
+	MFP_ADDR(GPIO9, 0x02d4),
+	MFP_ADDR(GPIO10, 0x02f4),
+	MFP_ADDR(GPIO11, 0x02f0),
+	MFP_ADDR(GPIO12, 0x0304),
+	MFP_ADDR(GPIO13, 0x0310),
+	MFP_ADDR(GPIO14, 0x0308),
+	MFP_ADDR(GPIO15, 0x030c),
+	MFP_ADDR(GPIO16, 0x04e8),
+	MFP_ADDR(GPIO17, 0x04f4),
+	MFP_ADDR(GPIO18, 0x04f8),
+	MFP_ADDR(GPIO19, 0x04fc),
+	MFP_ADDR(GPIO20, 0x0518),
+	MFP_ADDR(GPIO21, 0x051c),
+	MFP_ADDR(GPIO22, 0x04ec),
+	MFP_ADDR(GPIO23, 0x0500),
+	MFP_ADDR(GPIO24, 0x04f0),
+	MFP_ADDR(GPIO25, 0x0504),
+	MFP_ADDR(GPIO26, 0x0510),
+	MFP_ADDR(GPIO27, 0x0514),
+	MFP_ADDR(GPIO28, 0x0520),
+	MFP_ADDR(GPIO29, 0x0600),
+	MFP_ADDR(GPIO30, 0x0618),
+	MFP_ADDR(GPIO31, 0x0610),
+	MFP_ADDR(GPIO32, 0x060c),
+	MFP_ADDR(GPIO33, 0x061c),
+	MFP_ADDR(GPIO34, 0x0620),
+	MFP_ADDR(GPIO35, 0x0628),
+	MFP_ADDR(GPIO36, 0x062c),
+	MFP_ADDR(GPIO37, 0x0630),
+	MFP_ADDR(GPIO38, 0x0634),
+	MFP_ADDR(GPIO39, 0x0638),
+	MFP_ADDR(GPIO40, 0x063c),
+	MFP_ADDR(GPIO41, 0x0614),
+	MFP_ADDR(GPIO42, 0x0624),
+	MFP_ADDR(GPIO43, 0x0608),
+	MFP_ADDR(GPIO44, 0x0604),
+	MFP_ADDR(GPIO45, 0x050c),
+	MFP_ADDR(GPIO46, 0x0508),
+	MFP_ADDR(GPIO47, 0x02bc),
+	MFP_ADDR(GPIO48, 0x02b4),
+	MFP_ADDR(GPIO49, 0x02b8),
+	MFP_ADDR(GPIO50, 0x02c8),
+	MFP_ADDR(GPIO51, 0x02c0),
+	MFP_ADDR(GPIO52, 0x02c4),
+	MFP_ADDR(GPIO53, 0x02d0),
+	MFP_ADDR(GPIO54, 0x02cc),
+	MFP_ADDR(GPIO55, 0x029c),
+	MFP_ADDR(GPIO56, 0x02a0),
+	MFP_ADDR(GPIO57, 0x0294),
+	MFP_ADDR(GPIO58, 0x0298),
+	MFP_ADDR(GPIO59, 0x02a4),
+	MFP_ADDR(GPIO60, 0x02a8),
+	MFP_ADDR(GPIO61, 0x02b0),
+	MFP_ADDR(GPIO62, 0x02ac),
+	MFP_ADDR(GPIO63, 0x0640),
+	MFP_ADDR(GPIO64, 0x065c),
+	MFP_ADDR(GPIO65, 0x0648),
+	MFP_ADDR(GPIO66, 0x0644),
+	MFP_ADDR(GPIO67, 0x0674),
+	MFP_ADDR(GPIO68, 0x0658),
+	MFP_ADDR(GPIO69, 0x0654),
+	MFP_ADDR(GPIO70, 0x0660),
+	MFP_ADDR(GPIO71, 0x0668),
+	MFP_ADDR(GPIO72, 0x0664),
+	MFP_ADDR(GPIO73, 0x0650),
+	MFP_ADDR(GPIO74, 0x066c),
+	MFP_ADDR(GPIO75, 0x064c),
+	MFP_ADDR(GPIO76, 0x0670),
+	MFP_ADDR(GPIO77, 0x0678),
+	MFP_ADDR(GPIO78, 0x067c),
+	MFP_ADDR(GPIO79, 0x0694),
+	MFP_ADDR(GPIO80, 0x069c),
+	MFP_ADDR(GPIO81, 0x06a0),
+	MFP_ADDR(GPIO82, 0x06a4),
+	MFP_ADDR(GPIO83, 0x0698),
+	MFP_ADDR(GPIO84, 0x06bc),
+	MFP_ADDR(GPIO85, 0x06b4),
+	MFP_ADDR(GPIO86, 0x06b0),
+	MFP_ADDR(GPIO87, 0x06c0),
+	MFP_ADDR(GPIO88, 0x06c4),
+	MFP_ADDR(GPIO89, 0x06ac),
+	MFP_ADDR(GPIO90, 0x0680),
+	MFP_ADDR(GPIO91, 0x0684),
+	MFP_ADDR(GPIO92, 0x0688),
+	MFP_ADDR(GPIO93, 0x0690),
+	MFP_ADDR(GPIO94, 0x068c),
+	MFP_ADDR(GPIO95, 0x06a8),
+	MFP_ADDR(GPIO96, 0x06b8),
+	MFP_ADDR(GPIO97, 0x0410),
+	MFP_ADDR(GPIO98, 0x0418),
+	MFP_ADDR(GPIO99, 0x041c),
+	MFP_ADDR(GPIO100, 0x0414),
+	MFP_ADDR(GPIO101, 0x0408),
+	MFP_ADDR(GPIO102, 0x0324),
+	MFP_ADDR(GPIO103, 0x040c),
+	MFP_ADDR(GPIO104, 0x0400),
+	MFP_ADDR(GPIO105, 0x0328),
+	MFP_ADDR(GPIO106, 0x0404),
+
+	MFP_ADDR(nXCVREN, 0x0204),
+	MFP_ADDR(DF_CLE_nOE, 0x020c),
+	MFP_ADDR(DF_nADV1_ALE, 0x0218),
+	MFP_ADDR(DF_SCLK_E, 0x0214),
+	MFP_ADDR(DF_SCLK_S, 0x0210),
+	MFP_ADDR(nBE0, 0x021c),
+	MFP_ADDR(nBE1, 0x0220),
+	MFP_ADDR(DF_nADV2_ALE, 0x0224),
+	MFP_ADDR(DF_INT_RnB, 0x0228),
+	MFP_ADDR(DF_nCS0, 0x022c),
+	MFP_ADDR(DF_nCS1, 0x0230),
+	MFP_ADDR(nLUA, 0x0254),
+	MFP_ADDR(nLLA, 0x0258),
+	MFP_ADDR(DF_nWE, 0x0234),
+	MFP_ADDR(DF_nRE_nOE, 0x0238),
+	MFP_ADDR(DF_ADDR0, 0x024c),
+	MFP_ADDR(DF_ADDR1, 0x0250),
+	MFP_ADDR(DF_ADDR2, 0x025c),
+	MFP_ADDR(DF_ADDR3, 0x0260),
+	MFP_ADDR(DF_IO0, 0x023c),
+	MFP_ADDR(DF_IO1, 0x0240),
+	MFP_ADDR(DF_IO2, 0x0244),
+	MFP_ADDR(DF_IO3, 0x0248),
+	MFP_ADDR(DF_IO4, 0x0264),
+	MFP_ADDR(DF_IO5, 0x0268),
+	MFP_ADDR(DF_IO6, 0x026c),
+	MFP_ADDR(DF_IO7, 0x0270),
+	MFP_ADDR(DF_IO8, 0x0274),
+	MFP_ADDR(DF_IO9, 0x0278),
+	MFP_ADDR(DF_IO10, 0x027c),
+	MFP_ADDR(DF_IO11, 0x0280),
+	MFP_ADDR(DF_IO12, 0x0284),
+	MFP_ADDR(DF_IO13, 0x0288),
+	MFP_ADDR(DF_IO14, 0x028c),
+	MFP_ADDR(DF_IO15, 0x0290),
+
+	MFP_ADDR(GSIM_UIO, 0x0314),
+	MFP_ADDR(GSIM_UCLK, 0x0318),
+	MFP_ADDR(GSIM_UDET, 0x031c),
+	MFP_ADDR(GSIM_nURST, 0x0320),
+
+	MFP_ADDR(PMIC_INT, 0x06c8),
+
+	MFP_ADDR(RDY, 0x0200),
+
+	MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+	if (cpu_is_pxa930()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+	}
+
+	return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 00000000000..9996c612c3d
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,98 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
+
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+	int rc;
+
+	rc = gpio_request(gpio, "reset generator");
+	if (rc) {
+		printk(KERN_ERR "Can't request reset_gpio\n");
+		goto out;
+	}
+
+	rc = gpio_direction_input(gpio);
+	if (rc) {
+		printk(KERN_ERR "Can't configure reset_gpio for input\n");
+		gpio_free(gpio);
+		goto out;
+	}
+
+out:
+	if (!rc)
+		reset_gpio = gpio;
+
+	return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+	BUG_ON(reset_gpio == -1);
+
+	/* drive it low */
+	gpio_direction_output(reset_gpio, 0);
+	mdelay(2);
+	/* rising edge or drive high */
+	gpio_set_value(reset_gpio, 1);
+	mdelay(2);
+	/* falling edge */
+	gpio_set_value(reset_gpio, 0);
+
+	/* give it some time */
+	mdelay(10);
+
+	WARN_ON(1);
+	/* fallback */
+	do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+	/* Initialize the watchdog and let it fire */
+	OWER = OWER_WME;
+	OSSR = OSSR_M3;
+	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+	clear_reset_status(RESET_STATUS_ALL);
+
+	switch (mode) {
+	case 's':
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+		break;
+	case 'h':
+		do_hw_reset();
+		break;
+	case 'g':
+		do_gpio_reset();
+		break;
+	}
+}
+
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 00000000000..e7ea91ce7f0
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/saar.c
+ *
+ *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (SAAR_ETH_PHYS + 0x300),
+		.end	= (SAAR_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &saar_smc91x_info,
+	},
+};
+
+static void __init saar_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = saar_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 34cd585075b..e804ae09370 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -22,12 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
 #include "sharpsl.h"
 
 struct battery_thresh spitz_battery_levels_acin[] = {
@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void)
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void)
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 784716eb7fc..a62c8375eb5 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,10 +13,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
 #define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd9b43..b569f3b4cf3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,17 +35,20 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/reset.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -450,6 +453,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
 	else
 		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
@@ -459,6 +463,7 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
 		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
 	else
 		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
@@ -529,11 +534,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -547,6 +548,7 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+	init_gpio_reset(SPITZ_GPIO_ON_RESET);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
@@ -573,6 +575,7 @@ static void __init common_init(void)
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
 	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
+	pxa_set_i2c_info(NULL);
 }
 
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 360354084ae..8a40505dfd2 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 0bb31982fb6..9bd93c5f28b 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
  *  IO-based SSP applications and allows easy port setup for DMA access.
  *
  *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- *  Revision history:
- *   22nd Aug 2003 Initial version.
- *   20th Dec 2004 Added ssp_config for changing port config without
- *                 closing the port.
- *    4th Aug 2005 Added option to disable irq handler registration and
- *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -38,10 +31,10 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/hardware.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
 
@@ -285,7 +278,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
 			goto out_region;
 		dev->irq = ssp->irq;
 	} else
-		dev->irq = 0;
+		dev->irq = NO_IRQ;
 
 	/* turn on SSP port clock */
 	clk_enable(ssp->clk);
@@ -306,7 +299,8 @@ void ssp_exit(struct ssp_dev *dev)
 	struct ssp_device *ssp = dev->ssp;
 
 	ssp_disable(dev);
-	free_irq(dev->irq, dev);
+	if (dev->irq != NO_IRQ)
+		free_irq(dev->irq, dev);
 	clk_disable(ssp->clk);
 	ssp_free(ssp);
 }
@@ -360,6 +354,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 		dev_err(&pdev->dev, "failed to allocate memory");
 		return -ENOMEM;
 	}
+	ssp->pdev = pdev;
 
 	ssp->clk = clk_get(&pdev->dev, "SSPCLK");
 	if (IS_ERR(ssp->clk)) {
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 40bb70eff3f..f3821cfda72 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -11,10 +11,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 		.text
 
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 00000000000..589d32b4fc4
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (TAVOREVB_ETH_PHYS + 0x300),
+		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &tavorevb_smc91x_info,
+	},
+};
+
+static void __init tavorevb_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7b7c0179795..b0d6b32654c 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -17,12 +17,12 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 /*
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 00000000000..fb0294bd431
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <mach/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 0);
+	gpio_set_value(data->gpio_pwr, 1);
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(20);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(10);
+	gpio_set_value(data->gpio_pwr, 0);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+	pr_info("BT_RADIO going: %s\n",
+			state == RFKILL_STATE_ON ? "on" : "off");
+
+	if (state == RFKILL_STATE_ON) {
+		pr_info("TOSA_BT: going ON\n");
+		tosa_bt_on(data);
+	} else {
+		pr_info("TOSA_BT: going OFF\n");
+		tosa_bt_off(data);
+	}
+	return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+	int rc;
+	struct rfkill *rfk;
+
+	struct tosa_bt_data *data = dev->dev.platform_data;
+
+	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+	if (rc)
+		goto err_reset;
+	rc = gpio_direction_output(data->gpio_reset, 0);
+	if (rc)
+		goto err_reset_dir;
+	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+	if (rc)
+		goto err_pwr;
+	rc = gpio_direction_output(data->gpio_pwr, 0);
+	if (rc)
+		goto err_pwr_dir;
+
+	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	if (!rfk) {
+		rc = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfk->name = "tosa-bt";
+	rfk->toggle_radio = tosa_bt_toggle_radio;
+	rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+	rfk->led_trigger.name = "tosa-bt";
+#endif
+
+	rc = rfkill_register(rfk);
+	if (rc)
+		goto err_rfkill;
+
+	platform_set_drvdata(dev, rfk);
+
+	return 0;
+
+err_rfkill:
+	if (rfk)
+		rfkill_free(rfk);
+	rfk = NULL;
+err_rfk_alloc:
+	tosa_bt_off(data);
+err_pwr_dir:
+	gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+	gpio_free(data->gpio_reset);
+err_reset:
+	return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+	struct tosa_bt_data *data = dev->dev.platform_data;
+	struct rfkill *rfk = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (rfk)
+		rfkill_unregister(rfk);
+	rfk = NULL;
+
+	tosa_bt_off(data);
+
+	gpio_free(data->gpio_pwr);
+	gpio_free(data->gpio_reset);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+	.probe = tosa_bt_probe,
+	.remove = __devexit_p(tosa_bt_remove),
+
+	.driver = {
+		.name = "tosa-bt",
+		.owner = THIS_MODULE,
+	},
+};
+
+
+static int __init tosa_bt_init(void)
+{
+	return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+	platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f57991..9f3ef9eb32e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,36 +18,39 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long tosa_pin_config[] = {
@@ -86,7 +89,7 @@ static unsigned long tosa_pin_config[] = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 	GPIO9_GPIO, /* Detect */
-	// GPIO10 nSD_INT
+	GPIO10_GPIO, /* nSD_INT */
 
 	/* CF */
 	GPIO13_GPIO, /* CD_IRQ */
@@ -124,34 +127,34 @@ static unsigned long tosa_pin_config[] = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* IrDA */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
 	/* Keybd */
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
 	GPIO82_SSP2_FRM_OUT,
 	GPIO83_SSP2_TXD,
+
+	/* IrDA is managed in other way */
+	GPIO46_GPIO,
+	GPIO47_GPIO,
 };
 
 /*
@@ -249,6 +252,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
 	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+		goto err_gpio_detect;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+	if (err)
+		goto err_gpio_detect_dir;
+
 	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"MMC/SD card detect", data);
@@ -257,7 +269,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 		goto err_irq;
 	}
 
-	err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
 		goto err_gpio_wp;
@@ -266,7 +278,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_wp_dir;
 
-	err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
 		goto err_gpio_pwr;
@@ -275,8 +287,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_pwr_dir;
 
+	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+		goto err_gpio_int;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+	if (err)
+		goto err_gpio_int_dir;
+
 	return 0;
 
+err_gpio_int_dir:
+	gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
 	gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -285,6 +309,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+	gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
 	return err;
 }
 
@@ -306,9 +333,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+	gpio_free(TOSA_GPIO_nSD_INT);
 	gpio_free(TOSA_GPIO_PWR_ON);
 	gpio_free(TOSA_GPIO_SD_WP);
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +351,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	} else {
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+	}
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
 	int ret;
 
+	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+	if (ret)
+		goto err_tx;
+	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	if (ret)
+		goto err_tx_dir;
+
 	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
 	if (ret)
-		return ret;
+		goto err_pwr;
 
 	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
 	if (ret)
-		gpio_free(TOSA_GPIO_IR_POWERDWN);
+		goto err_pwr_dir;
 
-	return ret;
-	}
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+	return 0;
+
+err_pwr_dir:
 	gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+	gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+	return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-	gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+	gpio_free(TOSA_GPIO_IR_POWERDWN);
+	gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +410,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 };
 
 /*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+	gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+	"jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+	.init			= tosa_power_init,
+	.is_ac_online		= tosa_power_ac_online,
+	.exit			= tosa_power_exit,
+	.supplied_to		= tosa_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device tosa_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &tosa_power_data,
+	.resource		= tosa_power_resource,
+	.num_resources		= ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
  * Tosa Keyboard
  */
 static struct platform_device tosakbd_device = {
@@ -403,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
 		.wakeup	= 1,
 		.active_low = 1,
 	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= TOSA_GPIO_EAR_IN,
+		.desc	= "HeadPhone insert",
+		.active_low = 1,
+		.debounce_interval = 300,
+	},
 };
 
 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@@ -439,7 +566,7 @@ static struct gpio_led tosa_gpio_leds[] = {
 	},
 	{
 		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "none",
+		.default_trigger	= "tosa-bt",
 		.gpio			= TOSA_GPIO_BT_LED,
 	},
 };
@@ -457,21 +584,184 @@ static struct platform_device tosaled_device = {
 	},
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+	[0] = {
+		.start	= TOSA_LCDC_PHYS,
+		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+
+	[1] = {
+		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+	if (rc)
+		goto err_req_pclr;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+	if (rc)
+		goto err_req_suspend;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	if (rc)
+		goto err_req_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	if (rc)
+		goto err_dir_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	if (rc)
+		goto err_dir_suspend;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+	if (rc)
+		goto err_dir_pclr;
+
+	mdelay(1);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+	mdelay(10);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+	return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+	return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+	mdelay(10);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+	mdelay(10);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+	{
+		.name	= "smf",
+		.offset	= 0,
+		.size	= 7 * 1024 * 1024,
+	},
+	{
+		.name	= "root",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 28 * 1024 * 1024,
+	},
+	{
+		.name	= "home",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
+	.partition	= tosa_nand_partition,
+	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+	.scr_pll2cr	= 0x0cc1,
+	.scr_gper	= 0x3300,
+	.scr_gpo_dsr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+	.scr_gpo_doecr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+	.irq_base	= IRQ_BOARD_START,
+	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+
+	.enable		= tosa_tc6393xb_enable,
+	.disable	= tosa_tc6393xb_disable,
+	.suspend	= tosa_tc6393xb_suspend,
+	.resume		= tosa_tc6393xb_resume,
+
+	.nand_data	= &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+	.name	= "tc6393xb",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_tc6393xb_setup,
+	},
+	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
+	.resource	= tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
+	.gpio_reset	= TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+	.name	= "tosa-bt",
+	.id	= -1,
+	.dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
+	&tc6393xb_device,
+	&tosa_power_device,
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
+	&tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
 {
-	gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
-	gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -485,10 +775,14 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+	int dummy;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+	init_gpio_reset(TOSA_GPIO_ON_RESET);
+
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
 
@@ -497,12 +791,18 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
+	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
+	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 61e24402308..3ed757e6bcc 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -31,7 +31,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,15 +40,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= TRIZEPS4_ETH_IRQ,
 		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= (IORESOURCE_IRQ | IRQT_RISING),
+		.flags	= (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
 	},
 };
 
@@ -254,6 +254,7 @@ static void board_irda_mode(struct device *dev, int mode)
 		/* Fast mode */
 		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		trizeps_conxs_ircr |= ConXS_IRCR_SD;
 	} else {
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 66b446ca273..0cb65b5772f 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,16 +19,18 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/zylonite.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -37,6 +39,8 @@
 struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 
 int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
 
 int wm9713_irq;
 
@@ -56,13 +60,57 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata zylonite_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &zylonite_smc91x_info,
+	},
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+	[0] = {
+		.name			= "zylonite:yellow:1",
+		.default_trigger	= "heartbeat",
+	},
+	[1] = {
+		.name			= "zylonite:yellow:2",
+		.default_trigger	= "default-on",
+	},
 };
 
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+	.leds		= zylonite_debug_leds,
+	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &zylonite_debug_leds_info,
+	}
+};
+
+static void __init zylonite_init_leds(void)
+{
+	zylonite_debug_leds[0].gpio = gpio_debug_led1;
+	zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+	platform_device_register(&zylonite_device_leds);
+}
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
 	.pwm_id		= 3,
@@ -259,7 +307,7 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int zylonite_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
@@ -324,6 +372,57 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= zylonite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+	pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -342,6 +441,8 @@ static void __init zylonite_init(void)
 	zylonite_init_lcd();
 	zylonite_init_mmc();
 	zylonite_init_keypad();
+	zylonite_init_nand();
+	zylonite_init_leds();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 6f7ae972b8d..095f5c64823 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,10 +16,13 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/zylonite.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/i2c.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
@@ -109,6 +112,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO12_MMC2_DAT3,
 	GPIO13_MMC2_CLK,
 	GPIO14_MMC2_CMD,
+
+	/* Standard I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -192,6 +199,39 @@ static void __init zylonite_detect_lcd_panel(void)
 		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
 }
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+	[0] = {
+		.gpio_base	= 128,
+	},
+	[1] = {
+		.gpio_base	= 144,
+	},
+};
+
+struct i2c_board_info zylonite_i2c_board_info[] = {
+	{
+		.type		= "pca9539",
+		.addr		= 0x74,
+		.platform_data	= &gpio_exp[0],
+		.irq		= IRQ_GPIO(18),
+	}, {
+		.type		= "pca9539",
+		.addr		= 0x75,
+		.platform_data	= &gpio_exp[1],
+		.irq		= IRQ_GPIO(19),
+	},
+};
+
+static void __init zylonite_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
 void __init zylonite_pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -207,6 +247,8 @@ void __init zylonite_pxa300_init(void)
 
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+		zylonite_init_i2c();
 	}
 
 	if (cpu_is_pxa300()) {
@@ -222,4 +264,8 @@ void __init zylonite_pxa300_init(void)
 		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
 		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
+
+	/* GPIOs for Debug LEDs */
+	gpio_debug_led1 = EXT_GPIO(25);
+	gpio_debug_led2 = EXT_GPIO(26);
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b4fc34919a..9879d7da2df 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mfp-pxa320.h>
-#include <asm/arch/zylonite.h>
+#include <mach/gpio.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
@@ -116,6 +116,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO27_MMC2_DAT3,
 	GPIO28_MMC2_CLK,
 	GPIO29_MMC2_CMD,
+
+	/* Debug LEDs */
+	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 #define NUM_LCD_DETECT_PINS	7
@@ -189,6 +193,8 @@ void __init zylonite_pxa320_init(void)
 
 		/* GPIO pin assignment */
 		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
+		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
+		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 131990d196f..4f9c84ab781 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,7 +29,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
new file mode 100644
index 00000000000..8d699fd324d
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_EB_H
+#define __ASM_ARCH_BOARD_EB_H
+
+#include <mach/platform.h>
+
+/*
+ * RealView EB + ARM11MPCore peripheral addresses
+ */
+#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
+#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
+#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
+
+#define REALVIEW_EB_FLASH_BASE		0x40000000
+#define REALVIEW_EB_FLASH_SIZE		SZ_64M
+#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
+#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	0x10100700
+#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
+#else
+#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	0x1F000700
+#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
+#endif
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_EB_PROC_MASK		0xFF000000
+#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
+#define REALVIEW_EB_PROC_ARM9		0x02000000
+#define REALVIEW_EB_PROC_ARM11		0x04000000
+#define REALVIEW_EB_PROC_ARM11MP	0x06000000
+
+#define check_eb_proc(proc_type)						\
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
+	 == proc_type)
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP
+#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
+#else
+#define core_tile_eb11mp()	0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
new file mode 100644
index 00000000000..858eea7b1ad
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB1176_H
+#define __ASM_ARCH_BOARD_PB1176_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
+#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
+#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
+#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
+#define REALVIEW_PB1176_FLASH_BASE		0x30000000
+#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+
+#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
+#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
+#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
+#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
+#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
+#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
+#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
+#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
+#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
+#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
+#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
+#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
+#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
+#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
+
+/*
+ * PCI regions
+ */
+#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
+#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
+#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
+#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
+#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
+#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
+
+#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
+
+#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
+#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
+#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
+#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
+#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
new file mode 100644
index 00000000000..ecd80e58631
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -0,0 +1,186 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB11MP_H
+#define __ASM_ARCH_BOARD_PB11MP_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
+#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
+#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
+#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
+#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
+#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
+#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
+#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
+#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
+#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
+#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
+
+/*
+ * PB11MPCore PCI regions
+ */
+#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Testchip peripheral and fpga gic regions
+ */
+#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
+#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
+#define REALVIEW_TC11MP_TWD_BASE		0x1F000700
+#define REALVIEW_TC11MP_TWD_SIZE		0x00000100
+#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
+#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
new file mode 100644
index 00000000000..7196bcadff0
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf0000000	@ virtual base
+		orr	\rx, \rx, #0x00009000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h
new file mode 100644
index 00000000000..f1a5a1a1095
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-realview/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
new file mode 100644
index 00000000000..340a5c27694
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
new file mode 100644
index 00000000000..79a93b3dfca
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/mach-realview/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the RealView boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h
new file mode 100644
index 00000000000..aa069424d31
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/io.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-realview/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
new file mode 100644
index 00000000000..02a918529db
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+
+#define IRQ_GIC_START		32
+
+#ifndef NR_IRQS
+#error "NR_IRQS not defined by the board-specific files"
+#endif
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
new file mode 100644
index 00000000000..0e673483a14
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
new file mode 100644
index 00000000000..4034b54950c
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-realview/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+/*
+ * Memory definitions
+ */
+#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define REALVIEW_BOOT_ROM_HI          0x30000000
+#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
+#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
+
+#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
+#define REALVIEW_SSRAM_SIZE           SZ_2M
+
+/* 
+ *  SDRAM
+ */
+#define REALVIEW_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  RealView Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define REALVIEW_SYS_ID_OFFSET               0x00
+#define REALVIEW_SYS_SW_OFFSET               0x04
+#define REALVIEW_SYS_LED_OFFSET              0x08
+#define REALVIEW_SYS_OSC0_OFFSET             0x0C
+
+#define REALVIEW_SYS_OSC1_OFFSET             0x10
+#define REALVIEW_SYS_OSC2_OFFSET             0x14
+#define REALVIEW_SYS_OSC3_OFFSET             0x18
+#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
+
+#define REALVIEW_SYS_LOCK_OFFSET             0x20
+#define REALVIEW_SYS_100HZ_OFFSET            0x24
+#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
+#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
+#define REALVIEW_SYS_FLAGS_OFFSET            0x30
+#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
+#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
+#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
+#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
+#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
+#define REALVIEW_SYS_PCICTL_OFFSET           0x44
+#define REALVIEW_SYS_MCI_OFFSET              0x48
+#define REALVIEW_SYS_FLASH_OFFSET            0x4C
+#define REALVIEW_SYS_CLCD_OFFSET             0x50
+#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
+#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
+#define REALVIEW_SYS_24MHz_OFFSET            0x5C
+#define REALVIEW_SYS_MISC_OFFSET             0x60
+#define REALVIEW_SYS_IOSEL_OFFSET            0x70
+#define REALVIEW_SYS_PROCID_OFFSET           0x84
+#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
+#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
+#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
+#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
+#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
+
+#define REALVIEW_SYS_BASE                    0x10000000
+#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
+#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
+#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
+#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
+#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
+
+#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
+#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
+#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
+#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
+#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
+#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
+#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
+#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
+#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
+#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
+#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
+#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
+#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
+#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
+#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
+#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
+#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
+#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
+#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
+#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
+#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
+#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
+#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
+#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
+#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
+#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  RealView control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * REALVIEW_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * REALVIEW_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
+#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * REALVIEW_SYS_FLASH
+ */
+#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * REALVIEW_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * RealView common peripheral addresses
+ */
+#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
+#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
+#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
+#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
+#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
+#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
+#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
+#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
+#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
+#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
+
+/* PCI space */
+#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
+#define REALVIEW_PCI_CFG_BASE	      0x42000000
+#define REALVIEW_PCI_MEM_BASE0        0x44000000
+#define REALVIEW_PCI_MEM_BASE1        0x50000000
+#define REALVIEW_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define REALVIEW_PCI_BASE_SIZE	       0x01000000
+#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
+#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define REALVIEW_DOC_BASE             0x2C000000
+#define REALVIEW_DOC_SIZE             (16 << 20)
+#define REALVIEW_DOC_PAGE_SIZE        512
+#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define REALVIEW_SYS_LED0             (1 << 0)
+#define REALVIEW_SYS_LED1             (1 << 1)
+#define REALVIEW_SYS_LED2             (1 << 2)
+#define REALVIEW_SYS_LED3             (1 << 3)
+#define REALVIEW_SYS_LED4             (1 << 4)
+#define REALVIEW_SYS_LED5             (1 << 5)
+#define REALVIEW_SYS_LED6             (1 << 6)
+#define REALVIEW_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  REALVIEW_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
+#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
+#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      REALVIEW_FLASH_BASE
+#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
+#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define REALVIEW_REFCLK	0
+#define REALVIEW_TIMCLK	1
+
+#define REALVIEW_TIMER1_EnSel	15
+#define REALVIEW_TIMER2_EnSel	17
+#define REALVIEW_TIMER3_EnSel	19
+#define REALVIEW_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define REALVIEW_CSR_BASE             0x10000000
+#define REALVIEW_CSR_SIZE             0x10000000
+
+#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
new file mode 100644
index 00000000000..d55802d645a
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/scu.h
@@ -0,0 +1,13 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+/*
+ * SCU registers
+ */
+#define SCU_CTRL		0x00
+#define SCU_CONFIG		0x04
+#define SCU_CPU_STATUS		0x08
+#define SCU_INVALIDATE		0x0c
+#define SCU_FPGA_REVISION	0x10
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
new file mode 100644
index 00000000000..515819efd04
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -0,0 +1,30 @@
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+
+#include <asm/hardware/gic.h>
+
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(cpumask_t callmap)
+{
+	gic_raise_softirq(callmap, 1);
+}
+
+/*
+ * Do nothing on MPcore.
+ */
+static inline void smp_cross_call_done(cpumask_t callmap)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
new file mode 100644
index 00000000000..4d3c8f3f805
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -0,0 +1,51 @@
+/*
+ *  arch/arm/mach-realview/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h
new file mode 100644
index 00000000000..4eeb069373c
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-realview/include/mach/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
new file mode 100644
index 00000000000..79f50f218e7
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/mach-realview/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+	if (machine_is_realview_eb())
+		return REALVIEW_EB_UART0_BASE;
+	else if (machine_is_realview_pb11mp())
+		return REALVIEW_PB11MP_UART0_BASE;
+	else if (machine_is_realview_pb1176())
+		return REALVIEW_PB1176_UART0_BASE;
+	else
+		return 0;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
new file mode 100644
index 00000000000..48cbcc873db
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-realview/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 50604360479..82fa1f26e02 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -20,7 +20,7 @@
 
 #include <asm/hardware/arm_twd.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 8e813ed5751..1907d22f4fe 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -15,13 +15,13 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/scu.h>
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/scu.h>
 
 extern void realview_secondary_startup(void);
 
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 5782d83fd88..19a9968fc5b 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -38,8 +38,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-eb.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index cf7f576a586..0986cbd1594 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb1176.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb1176.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index f7ce1c5a178..f4e7135e3eb 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb11mp.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 596379a4cf8..4b19fe48419 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -20,7 +20,7 @@
 #include <asm/fiq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 #include <asm/mach/dma.h>
diff --git a/arch/arm/mach-rpc/include/mach/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
new file mode 100644
index 00000000000..395d76288ff
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/acornfb.h
@@ -0,0 +1,140 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/acornfb.h
+ *
+ *  Copyright (C) 1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  AcornFB architecture specific code
+ */
+
+#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
+
+static inline int
+acornfb_valid_pixrate(struct fb_var_screeninfo *var)
+{
+	u_long limit;
+
+	if (!var->pixclock)
+		return 0;
+
+	/*
+	 * Limits below are taken from RISC OS bandwidthlimit file
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			limit = 6578;
+		else
+			limit = 13157;
+	} else {
+		limit = 26315;
+	}
+
+	return acornfb_bandwidth(var) >= limit;
+}
+
+/*
+ * Try to find the best PLL parameters for the pixel clock.
+ * This algorithm seems to give best predictable results,
+ * and produces the same values as detailed in the VIDC20
+ * data sheet.
+ */
+static inline u_int
+acornfb_vidc20_find_pll(u_int pixclk)
+{
+	u_int r, best_r = 2, best_v = 2;
+	int best_d = 0x7fffffff;
+
+	for (r = 2; r <= 32; r++) {
+		u_int rr, v, p;
+		int d;
+
+		rr = 41667 * r;
+
+		v = (rr + pixclk / 2) / pixclk;
+
+		if (v > 32 || v < 2)
+			continue;
+
+		p = (rr + v / 2) / v;
+
+		d = pixclk - p;
+
+		if (d < 0)
+			d = -d;
+
+		if (d < best_d) {
+			best_d = d;
+			best_v = v - 1;
+			best_r = r - 1;
+		}
+
+		if (d == 0)
+			break;
+	}
+
+	return best_v << 8 | best_r;
+}
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+			  struct fb_var_screeninfo *var)
+{
+	u_int div;
+
+	/* Select pixel-clock divisor to keep PLL in range */
+	div = var->pixclock / 9090; /*9921*/
+
+	/* Limit divisor */
+	if (div == 0)
+		div = 1;
+	if (div > 8)
+		div = 8;
+
+	/* Encode divisor to VIDC20 setting */
+	switch (div) {
+	case 1:	vidc->control |= VIDC20_CTRL_PIX_CK;  break;
+	case 2:	vidc->control |= VIDC20_CTRL_PIX_CK2; break;
+	case 3:	vidc->control |= VIDC20_CTRL_PIX_CK3; break;
+	case 4:	vidc->control |= VIDC20_CTRL_PIX_CK4; break;
+	case 5:	vidc->control |= VIDC20_CTRL_PIX_CK5; break;
+	case 6:	vidc->control |= VIDC20_CTRL_PIX_CK6; break;
+	case 7:	vidc->control |= VIDC20_CTRL_PIX_CK7; break;
+	case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
+	}
+
+	/*
+	 * With VRAM, the FIFO can be set to the highest possible setting
+	 * because there are no latency considerations for other memory
+	 * accesses. However, in 64 bit bus mode the FIFO preload value
+	 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
+	 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
+	 * FIFO preload value).
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	} else {
+		unsigned long bandwidth = acornfb_bandwidth(var);
+
+		/* Encode bandwidth as VIDC20 setting */
+		if (bandwidth > 33334)		/* < 30.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_16;
+		else if (bandwidth > 26666)	/* < 37.5MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_20;
+		else if (bandwidth > 22222)	/* < 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else				/* > 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	}
+
+	/* Find the PLL values */
+	vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
+}
+
+#define acornfb_default_control()	(VIDC20_CTRL_PIX_VCLK)
+#define acornfb_default_econtrol()	(VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
new file mode 100644
index 00000000000..b2a939ffdcd
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-rpc/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x03000000
+		movne	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000fe0
+		.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-rpc/include/mach/dma.h b/arch/arm/mach-rpc/include/mach/dma.h
new file mode 100644
index 00000000000..360b56f8f29
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/dma.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/dma.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+#define MAX_DMA_CHANNELS	8
+
+#define DMA_0			0
+#define DMA_1			1
+#define DMA_2			2
+#define DMA_3			3
+#define DMA_S0			4
+#define DMA_S1			5
+#define DMA_VIRTUAL_FLOPPY	6
+#define DMA_VIRTUAL_SOUND	7
+
+#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
new file mode 100644
index 00000000000..4e7e5414409
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
new file mode 100644
index 00000000000..dde6b3c0e29
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -0,0 +1,83 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the RiscPC series machines.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
+#else
+#define IOMEM(x) x
+#endif /* __ASSEMBLY__ */
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_SIZE		0x10000000
+#define RAM_START		0x10000000
+
+#define EASI_SIZE		0x08000000	/* EASI I/O */
+#define EASI_START		0x08000000
+#define EASI_BASE		0xe5000000
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define UNCACHEABLE_ADDR	0xdf010000
+
+/*
+ * IO Addresses
+ */
+#define VIDC_BASE		IOMEM(0xe0400000)
+#define EXPMASK_BASE		0xe0360000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+#define IO_EC_EASI_BASE		0x81400000
+#define IO_EC_IOC4_BASE		0x8009c000
+#define IO_EC_IOC_BASE		0x80090000
+#define IO_EC_MEMC8_BASE	0x8000ac00
+#define IO_EC_MEMC_BASE		0x80000000
+
+#define NETSLOT_BASE		0x0302b000
+#define NETSLOT_SIZE		0x00001000
+
+#define PODSLOT_IOC0_BASE	0x03240000
+#define PODSLOT_IOC4_BASE	0x03270000
+#define PODSLOT_IOC_SIZE	(1 << 14)
+#define PODSLOT_MEMC_BASE	0x03000000
+#define PODSLOT_MEMC_SIZE	(1 << 14)
+#define PODSLOT_EASI_BASE	0x08000000
+#define PODSLOT_EASI_SIZE	(1 << 24)
+
+#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
new file mode 100644
index 00000000000..9f0553b7ec2
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -0,0 +1,258 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/io.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions.
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline void __iomem *__deprecated __ioaddr(unsigned int port)
+{
+	void __iomem *ret;
+	if (__PORT_PCIO(port))
+		ret = PCIO_BASE;
+	else
+		ret = IO_BASE;
+	return ret + (port << 2);
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)		__ioaddr(port)
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	((unsigned long)__ioaddr((port)))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
new file mode 100644
index 00000000000..4ce6ca97f66
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define IRQ_PRINTER		0
+#define IRQ_BATLOW		1
+#define IRQ_FLOPPYINDEX		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_IMMEDIATE		7
+#define IRQ_EXPCARDFIQ		8
+#define IRQ_HARDDISK		9
+#define IRQ_SERIALPORT		10
+#define IRQ_FLOPPYDISK		12
+#define IRQ_EXPANSIONCARD	13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define FIQ_FLOPPYDATA		0
+#define FIQ_ECONET		2
+#define FIQ_SERIALPORT		4
+#define FIQ_EXPANSIONCARD	6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
+
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
new file mode 100644
index 00000000000..05425d558ee
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
+ *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
new file mode 100644
index 00000000000..54d6e3f2d31
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	iomd_writeb(0, IOMD_ROMCR0);
+
+	/*
+	 * Jump into the ROM
+	 */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
new file mode 100644
index 00000000000..dd75e7387bb
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  RiscPC architecture timex specifications
+ */
+
+/*
+ * On the RiscPC, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
new file mode 100644
index 00000000000..baa9c866d7b
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -0,0 +1,198 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VIDMEM ((char *)SCREEN_START)
+ 
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+int video_size_row;
+unsigned char bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+	unsigned long page_size;
+	unsigned long nr_pages;
+	unsigned long ramdisk_size;
+	unsigned long mountrootrdonly;
+	unsigned long rootdev;
+	unsigned long video_num_cols;
+	unsigned long video_num_rows;
+	unsigned long video_x;
+	unsigned long video_y;
+	unsigned long memc_control_reg;
+	unsigned char sounddefault;
+	unsigned char adfsdrives;
+	unsigned char bytes_per_char_h;
+	unsigned char bytes_per_char_v;
+	unsigned long unused[256/4-11];
+};
+
+static const unsigned long palette_4[16] = {
+	0x00000000,
+	0x000000cc,
+	0x0000cc00,             /* Green   */
+	0x0000cccc,             /* Yellow  */
+	0x00cc0000,             /* Blue    */
+	0x00cc00cc,             /* Magenta */
+	0x00cccc00,             /* Cyan    */
+	0x00cccccc,             /* White   */
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff
+};
+
+#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
+#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
+
+/*
+ * params_phys is a linker defined symbol - see
+ * arch/arm/boot/compressed/Makefile
+ */
+extern __attribute__((pure)) struct param_struct *params(void);
+#define params (params())
+
+#ifndef STANDALONE_DEBUG 
+static unsigned long video_num_cols;
+static unsigned long video_num_rows;
+static unsigned long video_x;
+static unsigned long video_y;
+static unsigned char bytes_per_char_v;
+static int white;
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	extern void ll_write_char(char *, char c, char white);
+	int x,y;
+	char *ptr;
+
+	x = video_x;
+	y = video_y;
+
+	if (c == '\n') {
+		if (++y >= video_num_rows)
+			y--;
+	} else if (c == '\r') {
+		x = 0;
+	} else {
+		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
+		ll_write_char(ptr, c, white);
+		if (++x >= video_num_cols) {
+			x = 0;
+			if ( ++y >= video_num_rows ) {
+				y--;
+			}
+		}
+	}
+
+	video_x = x;
+	video_y = y;
+}
+
+static inline void flush(void)
+{
+}
+
+static void error(char *x);
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+	int i;
+	struct tag *t = (struct tag *)params;
+	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
+
+	if (t->hdr.tag == ATAG_CORE)
+	{
+		for (; t->hdr.size; t = tag_next(t))
+		{
+			if (t->hdr.tag == ATAG_VIDEOTEXT)
+			{
+				video_num_rows = t->u.videotext.video_lines;
+				video_num_cols = t->u.videotext.video_cols;
+				bytes_per_char_h = t->u.videotext.video_points;
+				bytes_per_char_v = t->u.videotext.video_points;
+				video_x = t->u.videotext.x;
+				video_y = t->u.videotext.y;
+			}
+
+			if (t->hdr.tag == ATAG_MEM)
+			{
+				page_size = PAGE_SIZE;
+				nr_pages += (t->u.mem.size / PAGE_SIZE);
+			}
+		}
+	}
+	else
+	{
+		nr_pages = params->nr_pages;
+		page_size = params->page_size;
+		video_num_rows = params->video_num_rows;
+		video_num_cols = params->video_num_cols;
+		video_x = params->video_x;
+		video_y = params->video_y;
+		bytes_per_char_h = params->bytes_per_char_h;
+		bytes_per_char_v = params->bytes_per_char_v;
+	}
+
+	video_size_row = video_num_cols * bytes_per_char_h;
+	
+	if (bytes_per_char_h == 4)
+		for (i = 0; i < 256; i++)
+			con_charconvtable[i] =
+				(i & 128 ? 1 << 0  : 0) |
+				(i & 64  ? 1 << 4  : 0) |
+				(i & 32  ? 1 << 8  : 0) |
+				(i & 16  ? 1 << 12 : 0) |
+				(i & 8   ? 1 << 16 : 0) |
+				(i & 4   ? 1 << 20 : 0) |
+				(i & 2   ? 1 << 24 : 0) |
+				(i & 1   ? 1 << 28 : 0);
+	else
+		for (i = 0; i < 16; i++)
+			con_charconvtable[i] =
+				(i & 8   ? 1 << 0  : 0) |
+				(i & 4   ? 1 << 8  : 0) |
+				(i & 2   ? 1 << 16 : 0) |
+				(i & 1   ? 1 << 24 : 0);
+
+
+	palette_setpixel(0);
+	if (bytes_per_char_h == 1) {
+		palette_write (0);
+		palette_write (0x00ffffff);
+		for (i = 2; i < 256; i++)
+			palette_write (0);
+		white = 1;
+	} else {
+		for (i = 0; i < 256; i++)
+			palette_write (i < 16 ? palette_4[i] : 0);
+		white = 7;
+	}
+
+	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
new file mode 100644
index 00000000000..9a96fd69e70
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index eca558c6bf5..ce8470fea88 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -22,7 +22,7 @@
 #include <asm/elf.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/domain.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 758e160410e..148d0ddef3e 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
new file mode 100644
index 00000000000..1535540edc8
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -0,0 +1,66 @@
+/* arch/arm/mach-s3c2400/include/mach/map.h
+ *
+ * Copyright 2003,2007  Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Copyright 2003, Lucas Correia Villa Real
+ *
+ * S3C2400 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C2400_PA_MEMCTRL	(0x14000000)
+#define S3C2400_PA_USBHOST	(0x14200000)
+#define S3C2400_PA_IRQ		(0x14400000)
+#define S3C2400_PA_DMA		(0x14600000)
+#define S3C2400_PA_CLKPWR	(0x14800000)
+#define S3C2400_PA_LCD		(0x14A00000)
+#define S3C2400_PA_UART		(0x15000000)
+#define S3C2400_PA_TIMER	(0x15100000)
+#define S3C2400_PA_USBDEV	(0x15200140)
+#define S3C2400_PA_WATCHDOG	(0x15300000)
+#define S3C2400_PA_IIC		(0x15400000)
+#define S3C2400_PA_IIS		(0x15508000)
+#define S3C2400_PA_GPIO		(0x15600000)
+#define S3C2400_PA_RTC		(0x15700040)
+#define S3C2400_PA_ADC		(0x15800000)
+#define S3C2400_PA_SPI		(0x15900000)
+
+#define S3C2400_PA_MMC		(0x15A00000)
+#define S3C2400_SZ_MMC		SZ_1M
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2400_CS0	(0x00000000)
+#define S3C2400_CS1	(0x02000000)
+#define S3C2400_CS2	(0x04000000)
+#define S3C2400_CS3	(0x06000000)
+#define S3C2400_CS4	(0x08000000)
+#define S3C2400_CS5	(0x0A000000)
+#define S3C2400_CS6	(0x0C000000)
+#define S3C2400_CS7	(0x0E000000)
+
+#define S3C2400_SDRAM_PA    (S3C2400_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ		S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL	S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST	S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA		S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR	S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD		S3C2400_PA_LCD
+#define S3C24XX_PA_UART		S3C2400_PA_UART
+#define S3C24XX_PA_TIMER	S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV	S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG	S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC		S3C2400_PA_IIC
+#define S3C24XX_PA_IIS		S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO		S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC		S3C2400_PA_RTC
+#define S3C24XX_PA_ADC		S3C2400_PA_ADC
+#define S3C24XX_PA_SPI		S3C2400_PA_SPI
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
new file mode 100644
index 00000000000..8f4878e4f59
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2400/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x0C000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
index df95fe37cdc..298ececfa36 100644
--- a/arch/arm/mach-s3c2410/bast-ide.c
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -24,9 +24,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 /* IDE ports */
 
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 76a7cb15f3b..c66021b5fa4 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -28,15 +28,15 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/regs-irq.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 #include <asm/plat-s3c24xx/irq.h>
 
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 2bfaa610202..1322851d1ac 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8f12e855ef5..8730797749e 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/dma.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 01e795d1146..c6eefb1d590 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -26,11 +26,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 			   unsigned int config)
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 3c48886521e..5a6bc56f186 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,9 +16,9 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
 
 #define DRV_NAME              "h1940-bt"
 
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
new file mode 100644
index 00000000000..1b614d5a81f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ANUBISCPLD_H
+#define __ASM_ARCH_ANUBISCPLD_H
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL		(0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK		(0x7)
+
+#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
new file mode 100644
index 00000000000..a2a328134e3
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  ANUBIS - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ANUBISIRQ_H
+#define __ASM_ARCH_ANUBISIRQ_H
+
+#define IRQ_IDE0       IRQ_EINT2
+#define IRQ_IDE1       IRQ_EINT3
+#define IRQ_ASIX       IRQ_EINT1
+
+#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
new file mode 100644
index 00000000000..c9deb3a5b2c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_ANUBISMAP_H
+#define __ASM_ARCH_ANUBISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
+#define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
+
+#define ANUBIS_VA_IDREG	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
+#define ANUBIS_PA_IDREG	    (ANUBIS_PA_CPLD + (3<<23))
+
+#define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC	    ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
+
+#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h
new file mode 100644
index 00000000000..de0e8da48bc
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/audio.h
@@ -0,0 +1,45 @@
+/* arch/arm/mach-s3c2410/include/mach/audio.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Audio platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_AUDIO_H
+#define __ASM_ARCH_AUDIO_H __FILE__
+
+/* struct s3c24xx_iis_ops
+ *
+ * called from the s3c24xx audio core to deal with the architecture
+ * or the codec's setup and control.
+ *
+ * the pointer to itself is passed through in case the caller wants to
+ * embed this in an larger structure for easy reference to it's context.
+*/
+
+struct s3c24xx_iis_ops {
+	struct module *owner;
+
+	int	(*startup)(struct s3c24xx_iis_ops *me);
+	void	(*shutdown)(struct s3c24xx_iis_ops *me);
+	int	(*suspend)(struct s3c24xx_iis_ops *me);
+	int	(*resume)(struct s3c24xx_iis_ops *me);
+
+	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+};
+
+struct s3c24xx_platdata_iis {
+	const char		*codec_clk;
+	struct s3c24xx_iis_ops	*ops;
+	int			(*match_dev)(struct device *dev);
+};
+
+#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
new file mode 100644
index 00000000000..20493b04836
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -0,0 +1,53 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTCPLD_H
+#define __ASM_ARCH_BASTCPLD_H
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
+#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
+#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
+#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND       (0x04)
+#define BAST_CPLD_CTLR2_IDERST      (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT	    (0x01)
+#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
+#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
+#define BAST_CPLD_DMA0_SECIDE      (1<<0)
+#define BAST_CPLD_DMA0_ISA15       (2<<0)
+#define BAST_CPLD_DMA0_ISA36       (3<<0)
+
+#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
+#define BAST_CPLD_DMA1_SECIDE      (1<<2)
+#define BAST_CPLD_DMA1_ISA15       (2<<2)
+#define BAST_CPLD_DMA1_ISA36       (3<<2)
+
+#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
new file mode 100644
index 00000000000..501c202b53c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTIRQ_H
+#define __ASM_ARCH_BASTIRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC      IRQ_EINT18
+#define IRQ_IDE0       IRQ_EINT16
+#define IRQ_IDE1       IRQ_EINT17
+#define IRQ_PCSERIAL1  IRQ_EINT15
+#define IRQ_PCSERIAL2  IRQ_EINT14
+#define IRQ_PCPARALLEL IRQ_EINT13
+#define IRQ_ASIX       IRQ_EINT11
+#define IRQ_DM9000     IRQ_EINT10
+#define IRQ_ISA	       IRQ_EINT9
+#define IRQ_SMALERT    IRQ_EINT8
+
+#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
new file mode 100644
index 00000000000..c2c5baf0734
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-map.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_BASTMAP_H
+#define __ASM_ARCH_BASTMAP_H
+
+#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
+#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
+#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
+#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
+#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1     (0x8800000)
+#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1     (0x8000000)
+#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1    (0x9800000)
+#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1    (0x9000000)
+#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2     (0xA800000)
+#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2     (0xA000000)
+#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2    (0xB800000)
+#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2    (0xB000000)
+#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
+
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO	  (0x00000000)
+#define BAST_PA_ASIXNET	  (0x01000000)
+#define BAST_PA_SUPERIO	  (0x01800000)
+#define BAST_PA_IDEPRI	  (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC	  (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM	  (0x04000000)
+#define BAST_PA_DM9000	  (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+/*  */
+
+#define BAST_ASIXNET_CS  BAST_VAM_CS5
+#define BAST_IDE_CS	 BAST_VAM_CS5
+#define BAST_DM9000_CS	 BAST_VAM_CS4
+
+#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
new file mode 100644
index 00000000000..61684cb8ce5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -0,0 +1,40 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * Machine BAST - Power Management chip
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTPMU_H
+#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
+
+#define BASTPMU_REG_IDENT	(0x00)
+#define BASTPMU_REG_VERSION	(0x01)
+#define BASTPMU_REG_DDCCTRL	(0x02)
+#define BASTPMU_REG_POWER	(0x03)
+#define BASTPMU_REG_RESET	(0x04)
+#define BASTPMU_REG_GWO		(0x05)
+#define BASTPMU_REG_WOL		(0x06)
+#define BASTPMU_REG_WOR		(0x07)
+#define BASTPMU_REG_UID		(0x09)
+
+#define BASTPMU_EEPROM		(0xC0)
+
+#define BASTPMU_EEP_UID		(BASTPMU_EEPROM + 0)
+#define BASTPMU_EEP_WOL		(BASTPMU_EEPROM + 8)
+#define BASTPMU_EEP_WOR		(BASTPMU_EEPROM + 9)
+
+#define BASTPMU_IDENT_0		0x53
+#define BASTPMU_IDENT_1		0x42
+#define BASTPMU_IDENT_2		0x50
+#define BASTPMU_IDENT_3		0x4d
+
+#define BASTPMU_RESET_GUARD	(0x55)
+
+#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
new file mode 100644
index 00000000000..682df23087a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -0,0 +1,102 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <asm/plat-s3c/regs-serial.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+#define SHIFT_2440TXF (14-9)
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C24XX_PA_UART
+		ldrne	\rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+	.macro fifo_full_s3c24xx rd, rx
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	1004f
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+1004:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		moveq	\rd, \rd, lsr #SHIFT_2440TXF
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+	.macro  fifo_full_s3c2410 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+/* fifo level reading */
+
+	.macro fifo_level_s3c24xx rd, rx
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	10000f
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+
+10000:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+	.endm
+
+	.macro fifo_level_s3c2410 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+	.endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
+#define fifo_full  fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
+#define fifo_full  fifo_full_s3c24xx
+#define fifo_level fifo_level_s3c24xx
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <asm/plat-s3c/debug-macro.S>
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
new file mode 100644
index 00000000000..891b53cd69b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -0,0 +1,453 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C241XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/sysdev.h>
+#include <mach/hardware.h>
+
+/*
+ * This is the maximum DMA address(physical address) that can be DMAd to.
+ *
+ */
+#define MAX_DMA_ADDRESS		0x40000000
+#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
+
+/* We use `virtual` dma channels to hide the fact we have only a limited
+ * number of DMA channels, and not of all of them (dependant on the device)
+ * can be attached to any DMA source. We therefore let the DMA core handle
+ * the allocation of hardware channels to clients.
+*/
+
+enum dma_ch {
+	DMACH_XD0,
+	DMACH_XD1,
+	DMACH_SDI,
+	DMACH_SPI0,
+	DMACH_SPI1,
+	DMACH_UART0,
+	DMACH_UART1,
+	DMACH_UART2,
+	DMACH_TIMER,
+	DMACH_I2S_IN,
+	DMACH_I2S_OUT,
+	DMACH_PCM_IN,
+	DMACH_PCM_OUT,
+	DMACH_MIC_IN,
+	DMACH_USB_EP1,
+	DMACH_USB_EP2,
+	DMACH_USB_EP3,
+	DMACH_USB_EP4,
+	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
+	DMACH_UART1_SRC2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,		/* s3c2443 has extra uart */
+	DMACH_UART3_SRC2,
+	DMACH_MAX,		/* the end entry */
+};
+
+#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
+
+/* we have 4 dma channels */
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS		(4)
+#else
+#define S3C2410_DMA_CHANNELS		(6)
+#endif
+
+/* types */
+
+enum s3c2410_dma_state {
+	S3C2410_DMA_IDLE,
+	S3C2410_DMA_RUNNING,
+	S3C2410_DMA_PAUSED
+};
+
+
+/* enum s3c2410_dma_loadst
+ *
+ * This represents the state of the DMA engine, wrt to the loaded / running
+ * transfers. Since we don't have any way of knowing exactly the state of
+ * the DMA transfers, we need to know the state to make decisions on wether
+ * we can
+ *
+ * S3C2410_DMA_NONE
+ *
+ * There are no buffers loaded (the channel should be inactive)
+ *
+ * S3C2410_DMA_1LOADED
+ *
+ * There is one buffer loaded, however it has not been confirmed to be
+ * loaded by the DMA engine. This may be because the channel is not
+ * yet running, or the DMA driver decided that it was too costly to
+ * sit and wait for it to happen.
+ *
+ * S3C2410_DMA_1RUNNING
+ *
+ * The buffer has been confirmed running, and not finisged
+ *
+ * S3C2410_DMA_1LOADED_1RUNNING
+ *
+ * There is a buffer waiting to be loaded by the DMA engine, and one
+ * currently running.
+*/
+
+enum s3c2410_dma_loadst {
+	S3C2410_DMALOAD_NONE,
+	S3C2410_DMALOAD_1LOADED,
+	S3C2410_DMALOAD_1RUNNING,
+	S3C2410_DMALOAD_1LOADED_1RUNNING,
+};
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+/* flags */
+
+#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
+					    * waiting for reloads */
+#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
+
+/* dma buffer */
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+/* s3c2410_dma_buf_s
+ *
+ * internally used buffer structure to describe a queued or running
+ * buffer.
+*/
+
+struct s3c2410_dma_buf;
+struct s3c2410_dma_buf {
+	struct s3c2410_dma_buf	*next;
+	int			 magic;		/* magic */
+	int			 size;		/* buffer size in bytes */
+	dma_addr_t		 data;		/* start of DMA data */
+	dma_addr_t		 ptr;		/* where the DMA got to [1] */
+	void			*id;		/* client's id */
+};
+
+/* [1] is this updated for both recv/send modes? */
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+struct s3c2410_dma_stats {
+	unsigned long		loads;
+	unsigned long		timeout_longest;
+	unsigned long		timeout_shortest;
+	unsigned long		timeout_avg;
+	unsigned long		timeout_failed;
+};
+
+struct s3c2410_dma_map;
+
+/* struct s3c2410_dma_chan
+ *
+ * full state information for each DMA channel
+*/
+
+struct s3c2410_dma_chan {
+	/* channel state flags and information */
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 irq_claimed; /* irq claimed for channel */
+	unsigned char		 irq_enabled; /* irq enabled for channel */
+	unsigned char		 xfer_unit;   /* size of an transfer */
+
+	/* channel state */
+
+	enum s3c2410_dma_state	 state;
+	enum s3c2410_dma_loadst	 load_state;
+	struct s3c2410_dma_client *client;
+
+	/* channel configuration */
+	enum s3c2410_dmasrc	 source;
+	unsigned long		 dev_addr;
+	unsigned long		 load_timeout;
+	unsigned int		 flags;		/* channel flags */
+	unsigned int		 hw_cfg;	/* last hw config */
+
+	struct s3c24xx_dma_map	*map;		/* channel hw maps */
+
+	/* channel's hardware position and configuration */
+	void __iomem		*regs;		/* channels registers */
+	void __iomem		*addr_reg;	/* data address register */
+	unsigned int		 irq;		/* channel irq */
+	unsigned long		 dcon;		/* default value of DCON */
+
+	/* driver handles */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* stats gathering */
+	struct s3c2410_dma_stats *stats;
+	struct s3c2410_dma_stats  stats_store;
+
+	/* buffer list and information */
+	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
+	struct s3c2410_dma_buf	*next;		/* next buffer to load */
+	struct s3c2410_dma_buf	*end;		/* end of queue */
+
+	/* system device */
+	struct sys_device	dev;
+};
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+/* note, we don't really use dma_device_t at the moment */
+typedef unsigned long dma_device_t;
+
+/* functions --------------------------------------------------------------- */
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(dmach_t channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(dmach_t channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 int hwcfg, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(dmach_t channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC       (0x00)
+#define S3C2410_DMA_DISRCC      (0x04)
+#define S3C2410_DMA_DIDST       (0x08)
+#define S3C2410_DMA_DIDSTC      (0x0C)
+#define S3C2410_DMA_DCON        (0x10)
+#define S3C2410_DMA_DSTAT       (0x14)
+#define S3C2410_DMA_DCSRC       (0x18)
+#define S3C2410_DMA_DCDST       (0x1C)
+#define S3C2410_DMA_DMASKTRIG   (0x20)
+#define S3C2412_DMA_DMAREQSEL	(0x24)
+#define S3C2443_DMA_DMAREQSEL	(0x24)
+
+#define S3C2410_DISRCC_INC	(1<<0)
+#define S3C2410_DISRCC_APB	(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP   (1<<2)
+#define S3C2410_DMASKTRIG_ON     (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND     (0<<31)
+#define S3C2410_DCON_HANDSHAKE  (1<<31)
+#define S3C2410_DCON_SYNC_PCLK  (0<<30)
+#define S3C2410_DCON_SYNC_HCLK  (1<<30)
+
+#define S3C2410_DCON_INTREQ     (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
+#define S3C2410_DCON_CH0_UART0	(1<<24)
+#define S3C2410_DCON_CH0_SDI	(2<<24)
+#define S3C2410_DCON_CH0_TIMER	(3<<24)
+#define S3C2410_DCON_CH0_USBEP1	(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
+#define S3C2410_DCON_CH1_UART1	(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
+#define S3C2410_DCON_CH1_SPI	(3<<24)
+#define S3C2410_DCON_CH1_USBEP2	(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
+#define S3C2410_DCON_CH2_SDI	(2<<24)
+#define S3C2410_DCON_CH2_TIMER	(3<<24)
+#define S3C2410_DCON_CH2_USBEP3	(4<<24)
+
+#define S3C2410_DCON_CH3_UART2	(0<<24)
+#define S3C2410_DCON_CH3_SDI	(1<<24)
+#define S3C2410_DCON_CH3_SPI	(2<<24)
+#define S3C2410_DCON_CH3_TIMER	(3<<24)
+#define S3C2410_DCON_CH3_USBEP4	(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT   (24)
+#define S3C2410_DCON_SRCMASK	(7<<24)
+
+#define S3C2410_DCON_BYTE       (0<<20)
+#define S3C2410_DCON_HALFWORD   (1<<20)
+#define S3C2410_DCON_WORD       (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD   (1<<22)
+#define S3C2410_DCON_HWTRIG     (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT	(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
+#define S3C2440_DCON_CH0_PCMIN	(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
+#define S3C2440_DCON_CH1_SDI	(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN	(5<<24)
+#define S3C2440_DCON_CH2_MICIN	(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN	(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
new file mode 100644
index 00000000000..473b3cd37d9
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S3C2410-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* We have a problem that the INTOFFSET register does not always
+ * show one interrupt. Occasionally we get two interrupts through
+ * the prioritiser, and this causes the INTOFFSET register to show
+ * what looks like the logical-or of the two interrupt numbers.
+ *
+ * Thanks to Klaus, Shannon, et al for helping to debug this problem
+*/
+
+#define INTPND		(0x10)
+#define INTOFFSET	(0x14)
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\base, #S3C24XX_VA_IRQ
+
+		@@ try the interrupt offset register, since it is there
+
+		ldr	\irqstat, [ \base, #INTPND ]
+		teq	\irqstat, #0
+		beq	1002f
+		ldr	\irqnr, [ \base, #INTOFFSET ]
+		mov	\tmp, #1
+		tst	\irqstat, \tmp, lsl \irqnr
+		bne	1001f
+
+		@@ the number specified is not a valid irq, so try
+		@@ and work it out for ourselves
+
+		mov	\irqnr, #0		@@ start here
+
+		@@ work out which irq (if any) we got
+
+		movs	\tmp, \irqstat, lsl#16
+		addeq	\irqnr, \irqnr, #16
+		moveq	\irqstat, \irqstat, lsr#16
+		tst	\irqstat, #0xff
+		addeq	\irqnr, \irqnr, #8
+		moveq	\irqstat, \irqstat, lsr#8
+		tst	\irqstat, #0xf
+		addeq	\irqnr, \irqnr, #4
+		moveq	\irqstat, \irqstat, lsr#4
+		tst	\irqstat, #0x3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\irqstat, \irqstat, lsr#2
+		tst	\irqstat, #0x1
+		addeq	\irqnr, \irqnr, #1
+
+		@@ we have the value
+1001:
+		adds	\irqnr, \irqnr, #IRQ_EINT0
+1002:
+		@@ exit here, Z flag unset if IRQ
+
+	.endm
+
+		/* currently don't need an disable_fiq macro */
+
+		.macro	disable_fiq
+		.endm
diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h
new file mode 100644
index 00000000000..eee0654eb8f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/fb.h
@@ -0,0 +1,74 @@
+/* arch/arm/mach-s3c2410/include/mach/fb.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+#include <mach/regs-lcd.h>
+
+struct s3c2410fb_hw {
+	unsigned long	lcdcon1;
+	unsigned long	lcdcon2;
+	unsigned long	lcdcon3;
+	unsigned long	lcdcon4;
+	unsigned long	lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+	/* LCD type */
+	unsigned type;
+
+	/* Screen size */
+	unsigned short width;
+	unsigned short height;
+
+	/* Screen info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned pixclock;		/* pixclock in picoseconds */
+	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
+
+	/* lcd configuration registers */
+	unsigned long	lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+	struct s3c2410fb_display *displays;	/* attached diplays info */
+	unsigned num_displays;			/* number of defined displays */
+	unsigned default_display;
+
+	/* GPIOs */
+
+	unsigned long	gpcup;
+	unsigned long	gpcup_mask;
+	unsigned long	gpccon;
+	unsigned long	gpccon_mask;
+	unsigned long	gpdup;
+	unsigned long	gpdup_mask;
+	unsigned long	gpdcon;
+	unsigned long	gpdcon_mask;
+
+	/* lpc3600 control register */
+	unsigned long	lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
new file mode 100644
index 00000000000..3b52b86498a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
new file mode 100644
index 00000000000..d8a832729a8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  iPAQ H1940 series - latch definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_LATCH_H
+#define __ASM_ARCH_H1940_LATCH_H
+
+
+#ifndef __ASSEMBLY__
+#define H1940_LATCH		((void __force __iomem *)0xF8000000)
+#else
+#define H1940_LATCH		0xF8000000
+#endif
+
+#define H1940_PA_LATCH		(S3C2410_CS2)
+
+/* SD layer latch */
+
+#define H1940_LATCH_SDQ1		(1<<16)
+#define H1940_LATCH_LCD_P1		(1<<17)
+#define H1940_LATCH_LCD_P2		(1<<18)
+#define H1940_LATCH_LCD_P3		(1<<19)
+#define H1940_LATCH_MAX1698_nSHUTDOWN	(1<<20)		/* LCD backlight */
+#define H1940_LATCH_LED_RED		(1<<21)
+#define H1940_LATCH_SDQ7		(1<<22)
+#define H1940_LATCH_USB_DP		(1<<23)
+
+/* CPU layer latch */
+
+#define H1940_LATCH_UDA_POWER		(1<<24)
+#define H1940_LATCH_AUDIO_POWER		(1<<25)
+#define H1940_LATCH_SM803_ENABLE	(1<<26)
+#define H1940_LATCH_LCD_P4		(1<<27)
+#define H1940_LATCH_CPUQ5		(1<<28)		/* untraced */
+#define H1940_LATCH_BLUETOOTH_POWER	(1<<29)		/* active high */
+#define H1940_LATCH_LED_GREEN		(1<<30)
+#define H1940_LATCH_LED_FLASH		(1<<31)
+
+/* default settings */
+
+#define H1940_LATCH_DEFAULT		\
+	H1940_LATCH_LCD_P4		| \
+	H1940_LATCH_SM803_ENABLE	| \
+	H1940_LATCH_SDQ1		| \
+	H1940_LATCH_LCD_P1		| \
+	H1940_LATCH_LCD_P2		| \
+	H1940_LATCH_LCD_P3		| \
+	H1940_LATCH_MAX1698_nSHUTDOWN   | \
+	H1940_LATCH_CPUQ5
+
+/* control functions */
+
+extern void h1940_latch_control(unsigned int clear, unsigned int set);
+
+#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h
new file mode 100644
index 00000000000..4559784129c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/h1940.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c2410/include/mach/h1940.h
+ *
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * H1940 definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_H
+#define __ASM_ARCH_H1940_H
+
+#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT		(0x30081000)
+#define H1940_SUSPEND_CHECK		(0x30080000)
+
+extern void h1940_pm_return(void);
+
+#endif /* __ASM_ARCH_H1940_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
new file mode 100644
index 00000000000..74d5a1a4024
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -0,0 +1,137 @@
+/* arch/arm/mach-s3c2410/include/mach/hardware.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irq2pin
+ *
+ * turn the given irq number into the corresponding GPIO number
+ *
+ * returns:
+ *	< 0 = no pin
+ *	>=0 = gpio pin number
+*/
+
+extern int s3c2410_gpio_irq2pin(unsigned int irq);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
+
+#endif /* CONFIG_CPU_S3C2412 */
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+/* machine specific hardware definitions should go after this */
+
+/* currently here until moved into config (todo) */
+#define CONFIG_NO_MULTIWORD_IO
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c2410/include/mach/idle.h
new file mode 100644
index 00000000000..e9ddd706b16
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/idle.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/idle.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU Idle controls
+*/
+
+#ifndef __ASM_ARCH_IDLE_H
+#define __ASM_ARCH_IDLE_H __FILE__
+
+/* This allows the over-ride of the default idle code, in case there
+ * is any other things to be done over idle (like DVS)
+*/
+
+extern void (*s3c24xx_idle)(void);
+
+extern void s3c24xx_default_idle(void);
+
+#endif /* __ASM_ARCH_IDLE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
new file mode 100644
index 00000000000..9813dbf2ae4
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -0,0 +1,218 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *	     (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
+ * and are translated to the start of IO.  Note that all addresses are
+ * not shifted left!
+ */
+
+#define __PORT_PCIO(x)	((x) < (1<<28))
+
+#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
+#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+
+#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
+static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
+{ \
+	unsigned long temp;				      \
+	__asm__ __volatile__(				      \
+	"cmp	%2, #(1<<28)\n\t"			      \
+	"mov	%0, %2\n\t"				      \
+	"addcc	%0, %0, %3\n\t"				      \
+	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
+	: "=&r" (temp)					      \
+	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
+	: "cc");					      \
+}
+
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{									\
+	unsigned long temp, value;					\
+	__asm__ __volatile__(						\
+	"cmp	%2, #(1<<28)\n\t"					\
+	"mov	%0, %2\n\t"						\
+	"addcc	%0, %0, %3\n\t"						\
+	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
+	: "=&r" (temp), "=r" (value)					\
+	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
+	: "cc");							\
+	return (unsigned sz)value;					\
+}
+
+static inline void __iomem *__ioaddr (unsigned long port)
+{
+	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr) \
+	DECLARE_DYN_OUT(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)						\
+({									\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, %2]	@ outbc"			\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, #0]	@ outbc"			\
+		: : "r" (value), "r" ((port)));				\
+})
+
+#define __inbc(port)							\
+({									\
+	unsigned char result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, %2]	@ inbc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, #0]	@ inbc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outwc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256)			\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			     "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, #0]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + (port)));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"strh	%0, [%1, #0]	@ outwc"			\
+		: : "r" (v), "r" ((port)));				\
+})
+
+#define __inwc(port)							\
+({									\
+	unsigned short result;						\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256 )			\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE),				\
+			  "Jr" ((port)));				\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			  "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, #0]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port))));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"ldrh	%0, [%1, #0]	@ inwc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outlc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, %2]	@ outlc"			\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, #0]	@ outlc"			\
+		: : "r" (v), "r" ((port)));		\
+})
+
+#define __inlc(port)							\
+({									\
+	unsigned long result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, %2]	@ inlc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, #0]	@ inlc"				\
+		: "=r" (result) : "r" ((port)));		\
+	result;								\
+})
+
+#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+
+#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
+#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
+#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
new file mode 100644
index 00000000000..950c71bf148
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -0,0 +1,166 @@
+/* arch/arm/mach-s3c2410/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET	 (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
+#define IRQ_EINT1      S3C2410_IRQ(1)
+#define IRQ_EINT2      S3C2410_IRQ(2)
+#define IRQ_EINT3      S3C2410_IRQ(3)
+#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
+#define IRQ_EINT8t23   S3C2410_IRQ(5)
+#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
+#define IRQ_BATT_FLT   S3C2410_IRQ(7)
+#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
+#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
+#define IRQ_TIMER0     S3C2410_IRQ(10)
+#define IRQ_TIMER1     S3C2410_IRQ(11)
+#define IRQ_TIMER2     S3C2410_IRQ(12)
+#define IRQ_TIMER3     S3C2410_IRQ(13)
+#define IRQ_TIMER4     S3C2410_IRQ(14)
+#define IRQ_UART2      S3C2410_IRQ(15)
+#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
+#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
+#define IRQ_DMA1       S3C2410_IRQ(18)
+#define IRQ_DMA2       S3C2410_IRQ(19)
+#define IRQ_DMA3       S3C2410_IRQ(20)
+#define IRQ_SDI	       S3C2410_IRQ(21)
+#define IRQ_SPI0       S3C2410_IRQ(22)
+#define IRQ_UART1      S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
+#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
+#define IRQ_USBD       S3C2410_IRQ(25)
+#define IRQ_USBH       S3C2410_IRQ(26)
+#define IRQ_IIC	       S3C2410_IRQ(27)
+#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
+#define IRQ_SPI1       S3C2410_IRQ(29)
+#define IRQ_RTC	       S3C2410_IRQ(30)
+#define IRQ_ADCPARENT  S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
+#define IRQ_EINT5      S3C2410_IRQ(33)
+#define IRQ_EINT6      S3C2410_IRQ(34)
+#define IRQ_EINT7      S3C2410_IRQ(35)
+#define IRQ_EINT8      S3C2410_IRQ(36)
+#define IRQ_EINT9      S3C2410_IRQ(37)
+#define IRQ_EINT10     S3C2410_IRQ(38)
+#define IRQ_EINT11     S3C2410_IRQ(39)
+#define IRQ_EINT12     S3C2410_IRQ(40)
+#define IRQ_EINT13     S3C2410_IRQ(41)
+#define IRQ_EINT14     S3C2410_IRQ(42)
+#define IRQ_EINT15     S3C2410_IRQ(43)
+#define IRQ_EINT16     S3C2410_IRQ(44)
+#define IRQ_EINT17     S3C2410_IRQ(45)
+#define IRQ_EINT18     S3C2410_IRQ(46)
+#define IRQ_EINT19     S3C2410_IRQ(47)
+#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
+#define IRQ_EINT21     S3C2410_IRQ(49)
+#define IRQ_EINT22     S3C2410_IRQ(50)
+#define IRQ_EINT23     S3C2410_IRQ(51)
+
+
+#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+
+#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
+#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+
+#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
+
+#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
+#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
+#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
+
+#define IRQ_TC			S3C2410_IRQSUB(9)
+#define IRQ_ADC			S3C2410_IRQSUB(10)
+
+/* extra irqs for s3c2412 */
+
+#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
+
+#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
+#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
+#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
+#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
+#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
+
+#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
+#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#endif
+
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START		IRQ_EINT0
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
new file mode 100644
index 00000000000..d8a7672519b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - LEDs GPIO connector
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_LEDSGPIO_H
+#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
+
+#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
+#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
+
+struct s3c24xx_led_platdata {
+	unsigned int		 gpio;
+	unsigned int		 flags;
+
+	char			*name;
+	char			*def_trigger;
+};
+
+#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
new file mode 100644
index 00000000000..64bf7e94a5b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -0,0 +1,178 @@
+/* arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include <asm/plat-s3c/map.h>
+
+#define S3C2410_ADDR(x)		S3C_ADDR(x)
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
+#define S3C2410_PA_IRQ	   (0x4A000000)
+#define S3C24XX_SZ_IRQ	   SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* DMA controller */
+#define S3C2410_PA_DMA	   (0x4B000000)
+#define S3C24XX_SZ_DMA	   SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
+#define S3C2410_PA_CLKPWR  (0x4C000000)
+#define S3C24XX_SZ_CLKPWR  SZ_1M
+
+/* LCD controller */
+#define S3C2410_PA_LCD	   (0x4D000000)
+#define S3C24XX_SZ_LCD	   SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND	   (0x4E000000)
+#define S3C24XX_SZ_NAND	   SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART	   S3C_VA_UART
+#define S3C2410_PA_UART	   (0x50000000)
+#define S3C24XX_SZ_UART	   SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER   S3C_VA_TIMER
+#define S3C2410_PA_TIMER   (0x51000000)
+#define S3C24XX_SZ_TIMER   SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV  (0x52000000)
+#define S3C24XX_SZ_USBDEV  SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC	   (0x54000000)
+#define S3C24XX_SZ_IIC	   SZ_1M
+
+/* IIS controller */
+#define S3C2410_PA_IIS	   (0x55000000)
+#define S3C24XX_SZ_IIS	   SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO	   (0x56000000)
+#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO	   SZ_1M
+
+/* RTC */
+#define S3C2410_PA_RTC	   (0x57000000)
+#define S3C24XX_SZ_RTC	   SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC	   (0x58000000)
+#define S3C24XX_SZ_ADC	   SZ_1M
+
+/* SPI */
+#define S3C2410_PA_SPI	   (0x59000000)
+#define S3C24XX_SZ_SPI	   SZ_1M
+
+/* SDI */
+#define S3C2410_PA_SDI	   (0x5A000000)
+#define S3C24XX_SZ_SDI	   SZ_1M
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF   (0x4F000000)
+#define S3C2440_SZ_CAMIF   SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97	   (0x5B000000)
+#define S3C2440_SZ_AC97	   SZ_1M
+
+/* S3C2443 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC   (0x4A800000)
+#define S3C2443_SZ_HSMMC   (256)
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA    (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA      S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD      S3C2410_PA_LCD
+#define S3C24XX_PA_UART     S3C2410_PA_UART
+#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC      S3C2410_PA_IIC
+#define S3C24XX_PA_IIS      S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC      S3C2410_PA_RTC
+#define S3C24XX_PA_ADC      S3C2410_PA_ADC
+#define S3C24XX_PA_SPI      S3C2410_PA_SPI
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
new file mode 100644
index 00000000000..93782628a78
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-s3c2410/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x30000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
new file mode 100644
index 00000000000..e9e36b0abba
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_OSIRISCPLD_H
+#define __ASM_ARCH_OSIRISCPLD_H
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL		(0x3)
+#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
+#define OSIRIS_CTRL0_PCMCIA		(1<<4)
+#define OSIRIS_CTRL0_FIX8		(1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
+
+#define OSIRIS_CTRL1_FIX8		(1<<0)
+
+#define OSIRIS_ID_REVMASK		(0x7)
+
+#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
new file mode 100644
index 00000000000..639eff523d4
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -0,0 +1,42 @@
+/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
+ *
+ * (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_OSIRISMAP_H
+#define __ASM_ARCH_OSIRISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
+
+#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
+#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
+
+#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
+#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
+
+#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
+#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
+#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
+#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
+
+#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c2410/include/mach/otom-map.h
new file mode 100644
index 00000000000..f9277a52c14
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/otom-map.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/otom-map.h
+ *
+ * (c) 2005 Guillaume GOURAT / NexVision
+ *          guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __ASM_ARCH_OTOMMAP_H
+#define __ASM_ARCH_OTOMMAP_H
+
+#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
+
+#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
new file mode 100644
index 00000000000..b3f90aa7807
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -0,0 +1,197 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE	     (1<<2)
+#define S3C2410_CLKCON_POWER	     (1<<3)
+#define S3C2410_CLKCON_NAND	     (1<<4)
+#define S3C2410_CLKCON_LCDC	     (1<<5)
+#define S3C2410_CLKCON_USBH	     (1<<6)
+#define S3C2410_CLKCON_USBD	     (1<<7)
+#define S3C2410_CLKCON_PWMT	     (1<<8)
+#define S3C2410_CLKCON_SDI	     (1<<9)
+#define S3C2410_CLKCON_UART0	     (1<<10)
+#define S3C2410_CLKCON_UART1	     (1<<11)
+#define S3C2410_CLKCON_UART2	     (1<<12)
+#define S3C2410_CLKCON_GPIO	     (1<<13)
+#define S3C2410_CLKCON_RTC	     (1<<14)
+#define S3C2410_CLKCON_ADC	     (1<<15)
+#define S3C2410_CLKCON_IIC	     (1<<16)
+#define S3C2410_CLKCON_IIS	     (1<<17)
+#define S3C2410_CLKCON_SPI	     (1<<18)
+
+#define S3C2410_PLLCON_MDIVSHIFT     12
+#define S3C2410_PLLCON_PDIVSHIFT     4
+#define S3C2410_PLLCON_SDIVSHIFT     0
+#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
+#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
+#define S3C2410_PLLCON_SDIVMASK	     3
+
+/* DCLKCON register addresses in gpio.h */
+
+#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
+#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
+#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
+#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
+#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
+
+#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
+#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
+#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
+#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
+#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
+
+#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
+
+#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
+#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
+#define S3C2410_CLKSLOW_SLOW		(1<<4)
+#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2410_PLLCON_MDIVMASK;
+	pdiv &= S3C2410_PLLCON_PDIVMASK;
+	sdiv &= S3C2410_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+/* extra registers */
+#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA        (1<<19)
+#define S3C2440_CLKCON_AC97          (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
+#define S3C2440_CLKDIVN_UCLK         (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
+#define S3C2440_CAMDIVN_DVSEN        (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
+
+#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+
+#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
+#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
+
+#define S3C2412_PLLCON_OFF		(1<<20)
+
+#define S3C2412_CLKDIVN_PDIVN		(1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
+#define S3C2412_CLKDIVN_DVSEN		(1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
+#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
+
+#define S3C2412_CLKCON_WDT		(1<<28)
+#define S3C2412_CLKCON_SPI		(1<<27)
+#define S3C2412_CLKCON_IIS		(1<<26)
+#define S3C2412_CLKCON_IIC		(1<<25)
+#define S3C2412_CLKCON_ADC		(1<<24)
+#define S3C2412_CLKCON_RTC		(1<<23)
+#define S3C2412_CLKCON_GPIO		(1<<22)
+#define S3C2412_CLKCON_UART2		(1<<21)
+#define S3C2412_CLKCON_UART1		(1<<20)
+#define S3C2412_CLKCON_UART0		(1<<19)
+#define S3C2412_CLKCON_SDI		(1<<18)
+#define S3C2412_CLKCON_PWMT		(1<<17)
+#define S3C2412_CLKCON_USBD		(1<<16)
+#define S3C2412_CLKCON_CAMCLK		(1<<15)
+#define S3C2412_CLKCON_UARTCLK		(1<<14)
+/* missing 13 */
+#define S3C2412_CLKCON_USB_HOST48	(1<<12)
+#define S3C2412_CLKCON_USB_DEV48	(1<<11)
+#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
+#define S3C2412_CLKCON_HCLKx2		(1<<9)
+#define S3C2412_CLKCON_SDRAM		(1<<8)
+/* missing 7 */
+#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
+#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
+#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
+#define S3C2412_CLKCON_DMA3		(1<<3)
+#define S3C2412_CLKCON_DMA2		(1<<2)
+#define S3C2412_CLKCON_DMA1		(1<<1)
+#define S3C2412_CLKCON_DMA0		(1<<0)
+
+/* clock sourec controls */
+
+#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
+#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
+#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
+#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
+#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
+#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
+#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
+#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
+#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
+
+#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
+
+#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
new file mode 100644
index 00000000000..3c3853cd3cf
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -0,0 +1,184 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440/S3C2412 Signal Drive Strength Control
+*/
+
+
+#ifndef __ASM_ARCH_REGS_DSC_H
+#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
+
+#if defined(CONFIG_CPU_S3C2412)
+#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
+#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
+#endif
+
+#if defined(CONFIG_CPU_S3C244X)
+
+#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
+#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
+
+#define S3C2440_SELECT_DSC0 (0)
+#define S3C2440_SELECT_DSC1 (1<<31)
+
+#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
+
+#define S3C2440_DSC0_DISABLE	(1<<31)
+
+#define S3C2440_DSC0_ADDR       (S3C2440_SELECT_DSC0 | 8)
+#define S3C2440_DSC0_ADDR_12mA  (0<<8)
+#define S3C2440_DSC0_ADDR_10mA  (1<<8)
+#define S3C2440_DSC0_ADDR_8mA   (2<<8)
+#define S3C2440_DSC0_ADDR_6mA   (3<<8)
+#define S3C2440_DSC0_ADDR_MASK  (3<<8)
+
+/* D24..D31 */
+#define S3C2440_DSC0_DATA3      (S3C2440_SELECT_DSC0 | 6)
+#define S3C2440_DSC0_DATA3_12mA (0<<6)
+#define S3C2440_DSC0_DATA3_10mA (1<<6)
+#define S3C2440_DSC0_DATA3_8mA  (2<<6)
+#define S3C2440_DSC0_DATA3_6mA  (3<<6)
+#define S3C2440_DSC0_DATA3_MASK (3<<6)
+
+/* D16..D23 */
+#define S3C2440_DSC0_DATA2      (S3C2440_SELECT_DSC0 | 4)
+#define S3C2440_DSC0_DATA2_12mA (0<<4)
+#define S3C2440_DSC0_DATA2_10mA (1<<4)
+#define S3C2440_DSC0_DATA2_8mA  (2<<4)
+#define S3C2440_DSC0_DATA2_6mA  (3<<4)
+#define S3C2440_DSC0_DATA2_MASK (3<<4)
+
+/* D8..D15 */
+#define S3C2440_DSC0_DATA1      (S3C2440_SELECT_DSC0 | 2)
+#define S3C2440_DSC0_DATA1_12mA (0<<2)
+#define S3C2440_DSC0_DATA1_10mA (1<<2)
+#define S3C2440_DSC0_DATA1_8mA  (2<<2)
+#define S3C2440_DSC0_DATA1_6mA  (3<<2)
+#define S3C2440_DSC0_DATA1_MASK (3<<2)
+
+/* D0..D7 */
+#define S3C2440_DSC0_DATA0      (S3C2440_SELECT_DSC0 | 0)
+#define S3C2440_DSC0_DATA0_12mA (0<<0)
+#define S3C2440_DSC0_DATA0_10mA (1<<0)
+#define S3C2440_DSC0_DATA0_8mA  (2<<0)
+#define S3C2440_DSC0_DATA0_6mA  (3<<0)
+#define S3C2440_DSC0_DATA0_MASK (3<<0)
+
+#define S3C2440_DSC1_SCK1       (S3C2440_SELECT_DSC1 | 28)
+#define S3C2440_DSC1_SCK1_12mA  (0<<28)
+#define S3C2440_DSC1_SCK1_10mA  (1<<28)
+#define S3C2440_DSC1_SCK1_8mA   (2<<28)
+#define S3C2440_DSC1_SCK1_6mA   (3<<28)
+#define S3C2440_DSC1_SCK1_MASK  (3<<28)
+
+#define S3C2440_DSC1_SCK0       (S3C2440_SELECT_DSC1 | 26)
+#define S3C2440_DSC1_SCK0_12mA  (0<<26)
+#define S3C2440_DSC1_SCK0_10mA  (1<<26)
+#define S3C2440_DSC1_SCK0_8mA   (2<<26)
+#define S3C2440_DSC1_SCK0_6mA   (3<<26)
+#define S3C2440_DSC1_SCK0_MASK  (3<<26)
+
+#define S3C2440_DSC1_SCKE       (S3C2440_SELECT_DSC1 | 24)
+#define S3C2440_DSC1_SCKE_10mA  (0<<24)
+#define S3C2440_DSC1_SCKE_8mA   (1<<24)
+#define S3C2440_DSC1_SCKE_6mA   (2<<24)
+#define S3C2440_DSC1_SCKE_4mA   (3<<24)
+#define S3C2440_DSC1_SCKE_MASK  (3<<24)
+
+/* SDRAM nRAS/nCAS */
+#define S3C2440_DSC1_SDR        (S3C2440_SELECT_DSC1 | 22)
+#define S3C2440_DSC1_SDR_10mA   (0<<22)
+#define S3C2440_DSC1_SDR_8mA    (1<<22)
+#define S3C2440_DSC1_SDR_6mA    (2<<22)
+#define S3C2440_DSC1_SDR_4mA    (3<<22)
+#define S3C2440_DSC1_SDR_MASK   (3<<22)
+
+/* NAND Flash Controller */
+#define S3C2440_DSC1_NFC        (S3C2440_SELECT_DSC1 | 20)
+#define S3C2440_DSC1_NFC_10mA   (0<<20)
+#define S3C2440_DSC1_NFC_8mA    (1<<20)
+#define S3C2440_DSC1_NFC_6mA    (2<<20)
+#define S3C2440_DSC1_NFC_4mA    (3<<20)
+#define S3C2440_DSC1_NFC_MASK   (3<<20)
+
+/* nBE[0..3] */
+#define S3C2440_DSC1_nBE        (S3C2440_SELECT_DSC1 | 18)
+#define S3C2440_DSC1_nBE_10mA   (0<<18)
+#define S3C2440_DSC1_nBE_8mA    (1<<18)
+#define S3C2440_DSC1_nBE_6mA    (2<<18)
+#define S3C2440_DSC1_nBE_4mA    (3<<18)
+#define S3C2440_DSC1_nBE_MASK   (3<<18)
+
+#define S3C2440_DSC1_WOE        (S3C2440_SELECT_DSC1 | 16)
+#define S3C2440_DSC1_WOE_10mA   (0<<16)
+#define S3C2440_DSC1_WOE_8mA    (1<<16)
+#define S3C2440_DSC1_WOE_6mA    (2<<16)
+#define S3C2440_DSC1_WOE_4mA    (3<<16)
+#define S3C2440_DSC1_WOE_MASK   (3<<16)
+
+#define S3C2440_DSC1_CS7        (S3C2440_SELECT_DSC1 | 14)
+#define S3C2440_DSC1_CS7_10mA   (0<<14)
+#define S3C2440_DSC1_CS7_8mA    (1<<14)
+#define S3C2440_DSC1_CS7_6mA    (2<<14)
+#define S3C2440_DSC1_CS7_4mA    (3<<14)
+#define S3C2440_DSC1_CS7_MASK   (3<<14)
+
+#define S3C2440_DSC1_CS6        (S3C2440_SELECT_DSC1 | 12)
+#define S3C2440_DSC1_CS6_10mA   (0<<12)
+#define S3C2440_DSC1_CS6_8mA    (1<<12)
+#define S3C2440_DSC1_CS6_6mA    (2<<12)
+#define S3C2440_DSC1_CS6_4mA    (3<<12)
+#define S3C2440_DSC1_CS6_MASK   (3<<12)
+
+#define S3C2440_DSC1_CS5        (S3C2440_SELECT_DSC1 | 10)
+#define S3C2440_DSC1_CS5_10mA   (0<<10)
+#define S3C2440_DSC1_CS5_8mA    (1<<10)
+#define S3C2440_DSC1_CS5_6mA    (2<<10)
+#define S3C2440_DSC1_CS5_4mA    (3<<10)
+#define S3C2440_DSC1_CS5_MASK   (3<<10)
+
+#define S3C2440_DSC1_CS4        (S3C2440_SELECT_DSC1 | 8)
+#define S3C2440_DSC1_CS4_10mA   (0<<8)
+#define S3C2440_DSC1_CS4_8mA    (1<<8)
+#define S3C2440_DSC1_CS4_6mA    (2<<8)
+#define S3C2440_DSC1_CS4_4mA    (3<<8)
+#define S3C2440_DSC1_CS4_MASK   (3<<8)
+
+#define S3C2440_DSC1_CS3        (S3C2440_SELECT_DSC1 | 6)
+#define S3C2440_DSC1_CS3_10mA   (0<<6)
+#define S3C2440_DSC1_CS3_8mA    (1<<6)
+#define S3C2440_DSC1_CS3_6mA    (2<<6)
+#define S3C2440_DSC1_CS3_4mA    (3<<6)
+#define S3C2440_DSC1_CS3_MASK   (3<<6)
+
+#define S3C2440_DSC1_CS2        (S3C2440_SELECT_DSC1 | 4)
+#define S3C2440_DSC1_CS2_10mA   (0<<4)
+#define S3C2440_DSC1_CS2_8mA    (1<<4)
+#define S3C2440_DSC1_CS2_6mA    (2<<4)
+#define S3C2440_DSC1_CS2_4mA    (3<<4)
+#define S3C2440_DSC1_CS2_MASK   (3<<4)
+
+#define S3C2440_DSC1_CS1        (S3C2440_SELECT_DSC1 | 2)
+#define S3C2440_DSC1_CS1_10mA   (0<<2)
+#define S3C2440_DSC1_CS1_8mA    (1<<2)
+#define S3C2440_DSC1_CS1_6mA    (2<<2)
+#define S3C2440_DSC1_CS1_4mA    (3<<2)
+#define S3C2440_DSC1_CS1_MASK   (3<<2)
+
+#define S3C2440_DSC1_CS0        (S3C2440_SELECT_DSC1 | 0)
+#define S3C2440_DSC1_CS0_10mA   (0<<0)
+#define S3C2440_DSC1_CS0_8mA    (1<<0)
+#define S3C2440_DSC1_CS0_6mA    (2<<0)
+#define S3C2440_DSC1_CS0_4mA    (3<<0)
+#define S3C2440_DSC1_CS0_MASK   (3<<0)
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#endif	/* __ASM_ARCH_REGS_DSC_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
new file mode 100644
index 00000000000..528080ceac4
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -0,0 +1,1163 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ *		           http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 GPIO register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA   (32*0)
+#define S3C2410_GPIO_BANKB   (32*1)
+#define S3C2410_GPIO_BANKC   (32*2)
+#define S3C2410_GPIO_BANKD   (32*3)
+#define S3C2410_GPIO_BANKE   (32*4)
+#define S3C2410_GPIO_BANKF   (32*5)
+#define S3C2410_GPIO_BANKG   (32*6)
+#define S3C2410_GPIO_BANKH   (32*7)
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
+#define S3C24XX_MISCCR        S3C2400_MISCCR
+#else
+#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
+#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
+#endif /* CONFIG_CPU_S3C2400 */
+
+
+/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
+
+#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
+#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
+#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
+                                 (2 * (S3C2400_BANKNUM(pin)-2)))
+
+#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
+                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
+                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
+
+
+#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
+#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
+#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
+#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
+#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
+
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
+
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ *          S3C2400: 18bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
+#define S3C2410_GPA0_OUT     (0<<0)
+#define S3C2410_GPA0_ADDR0   (1<<0)
+
+#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
+#define S3C2410_GPA1_OUT     (0<<1)
+#define S3C2410_GPA1_ADDR16  (1<<1)
+
+#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
+#define S3C2410_GPA2_OUT     (0<<2)
+#define S3C2410_GPA2_ADDR17  (1<<2)
+
+#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
+#define S3C2410_GPA3_OUT     (0<<3)
+#define S3C2410_GPA3_ADDR18  (1<<3)
+
+#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
+#define S3C2410_GPA4_OUT     (0<<4)
+#define S3C2410_GPA4_ADDR19  (1<<4)
+
+#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
+#define S3C2410_GPA5_OUT     (0<<5)
+#define S3C2410_GPA5_ADDR20  (1<<5)
+
+#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
+#define S3C2410_GPA6_OUT     (0<<6)
+#define S3C2410_GPA6_ADDR21  (1<<6)
+
+#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
+#define S3C2410_GPA7_OUT     (0<<7)
+#define S3C2410_GPA7_ADDR22  (1<<7)
+
+#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
+#define S3C2410_GPA8_OUT     (0<<8)
+#define S3C2410_GPA8_ADDR23  (1<<8)
+
+#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
+#define S3C2410_GPA9_OUT     (0<<9)
+#define S3C2410_GPA9_ADDR24  (1<<9)
+
+#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
+#define S3C2410_GPA10_OUT    (0<<10)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2400_GPA10_SCKE   (1<<10)
+
+#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
+#define S3C2410_GPA11_OUT    (0<<11)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2400_GPA11_nCAS0  (1<<11)
+
+#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
+#define S3C2410_GPA12_OUT    (0<<12)
+#define S3C2410_GPA12_nGCS1  (1<<12)
+#define S3C2400_GPA12_nCAS1  (1<<12)
+
+#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
+#define S3C2410_GPA13_OUT    (0<<13)
+#define S3C2410_GPA13_nGCS2  (1<<13)
+#define S3C2400_GPA13_nGCS1  (1<<13)
+
+#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
+#define S3C2410_GPA14_OUT    (0<<14)
+#define S3C2410_GPA14_nGCS3  (1<<14)
+#define S3C2400_GPA14_nGCS2  (1<<14)
+
+#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
+#define S3C2410_GPA15_OUT    (0<<15)
+#define S3C2410_GPA15_nGCS4  (1<<15)
+#define S3C2400_GPA15_nGCS3  (1<<15)
+
+#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
+#define S3C2410_GPA16_OUT    (0<<16)
+#define S3C2410_GPA16_nGCS5  (1<<16)
+#define S3C2400_GPA16_nGCS4  (1<<16)
+
+#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
+#define S3C2410_GPA17_OUT    (0<<17)
+#define S3C2410_GPA17_CLE    (1<<17)
+#define S3C2400_GPA17_nGCS5  (1<<17)
+
+#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
+#define S3C2410_GPA18_OUT    (0<<18)
+#define S3C2410_GPA18_ALE    (1<<18)
+
+#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
+#define S3C2410_GPA19_OUT    (0<<19)
+#define S3C2410_GPA19_nFWE   (1<<19)
+
+#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
+#define S3C2410_GPA20_OUT    (0<<20)
+#define S3C2410_GPA20_nFRE   (1<<20)
+
+#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
+#define S3C2410_GPA21_OUT    (0<<21)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+
+#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
+#define S3C2410_GPA22_OUT    (0<<22)
+#define S3C2410_GPA22_nFCE   (1<<22)
+
+/* 0x08 and 0x0c are reserved on S3C2410 */
+
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=special function, 11=reserved
+
+ * S3C2400:
+ * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=data, 11=special function
+
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
+
+#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
+#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
+#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
+
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
+
+#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
+#define S3C2410_GPB0_INP     (0x00 << 0)
+#define S3C2410_GPB0_OUTP    (0x01 << 0)
+#define S3C2410_GPB0_TOUT0   (0x02 << 0)
+#define S3C2400_GPB0_DATA16  (0x02 << 0)
+
+#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
+#define S3C2410_GPB1_INP     (0x00 << 2)
+#define S3C2410_GPB1_OUTP    (0x01 << 2)
+#define S3C2410_GPB1_TOUT1   (0x02 << 2)
+#define S3C2400_GPB1_DATA17  (0x02 << 2)
+
+#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
+#define S3C2410_GPB2_INP     (0x00 << 4)
+#define S3C2410_GPB2_OUTP    (0x01 << 4)
+#define S3C2410_GPB2_TOUT2   (0x02 << 4)
+#define S3C2400_GPB2_DATA18  (0x02 << 4)
+#define S3C2400_GPB2_TCLK1   (0x03 << 4)
+
+#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
+#define S3C2410_GPB3_INP     (0x00 << 6)
+#define S3C2410_GPB3_OUTP    (0x01 << 6)
+#define S3C2410_GPB3_TOUT3   (0x02 << 6)
+#define S3C2400_GPB3_DATA19  (0x02 << 6)
+#define S3C2400_GPB3_TXD1    (0x03 << 6)
+
+#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
+#define S3C2410_GPB4_INP     (0x00 << 8)
+#define S3C2410_GPB4_OUTP    (0x01 << 8)
+#define S3C2410_GPB4_TCLK0   (0x02 << 8)
+#define S3C2400_GPB4_DATA20  (0x02 << 8)
+#define S3C2410_GPB4_MASK    (0x03 << 8)
+#define S3C2400_GPB4_RXD1    (0x03 << 8)
+#define S3C2400_GPB4_MASK    (0x03 << 8)
+
+#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
+#define S3C2410_GPB5_INP     (0x00 << 10)
+#define S3C2410_GPB5_OUTP    (0x01 << 10)
+#define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2443_GPB5_XBACK   (0x03 << 10)
+#define S3C2400_GPB5_DATA21  (0x02 << 10)
+#define S3C2400_GPB5_nCTS1   (0x03 << 10)
+
+#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
+#define S3C2410_GPB6_INP     (0x00 << 12)
+#define S3C2410_GPB6_OUTP    (0x01 << 12)
+#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2443_GPB6_XBREQ   (0x03 << 12)
+#define S3C2400_GPB6_DATA22  (0x02 << 12)
+#define S3C2400_GPB6_nRTS1   (0x03 << 12)
+
+#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
+#define S3C2410_GPB7_INP     (0x00 << 14)
+#define S3C2410_GPB7_OUTP    (0x01 << 14)
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1  (0x03 << 14)
+#define S3C2400_GPB7_DATA23  (0x02 << 14)
+
+#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
+#define S3C2410_GPB8_INP     (0x00 << 16)
+#define S3C2410_GPB8_OUTP    (0x01 << 16)
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+#define S3C2400_GPB8_DATA24  (0x02 << 16)
+
+#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
+#define S3C2410_GPB9_INP     (0x00 << 18)
+#define S3C2410_GPB9_OUTP    (0x01 << 18)
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0  (0x03 << 18)
+#define S3C2400_GPB9_DATA25  (0x02 << 18)
+#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
+
+#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
+#define S3C2410_GPB10_INP    (0x00 << 20)
+#define S3C2410_GPB10_OUTP   (0x01 << 20)
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
+#define S3C2400_GPB10_DATA26 (0x02 << 20)
+#define S3C2400_GPB10_nSS    (0x03 << 20)
+
+#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
+#define S3C2400_GPB11_INP    (0x00 << 22)
+#define S3C2400_GPB11_OUTP   (0x01 << 22)
+#define S3C2400_GPB11_DATA27 (0x02 << 22)
+
+#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
+#define S3C2400_GPB12_INP    (0x00 << 24)
+#define S3C2400_GPB12_OUTP   (0x01 << 24)
+#define S3C2400_GPB12_DATA28 (0x02 << 24)
+
+#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
+#define S3C2400_GPB13_INP    (0x00 << 26)
+#define S3C2400_GPB13_OUTP   (0x01 << 26)
+#define S3C2400_GPB13_DATA29 (0x02 << 26)
+
+#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
+#define S3C2400_GPB14_INP    (0x00 << 28)
+#define S3C2400_GPB14_OUTP   (0x01 << 28)
+#define S3C2400_GPB14_DATA30 (0x02 << 28)
+
+#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
+#define S3C2400_GPB15_INP    (0x00 << 30)
+#define S3C2400_GPB15_OUTP   (0x01 << 30)
+#define S3C2400_GPB15_DATA31 (0x02 << 30)
+
+#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
+#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
+#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
+
+#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
+#define S3C2410_GPC0_INP	(0x00 << 0)
+#define S3C2410_GPC0_OUTP	(0x01 << 0)
+#define S3C2410_GPC0_LEND	(0x02 << 0)
+#define S3C2400_GPC0_VD0 	(0x02 << 0)
+
+#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
+#define S3C2410_GPC1_INP	(0x00 << 2)
+#define S3C2410_GPC1_OUTP	(0x01 << 2)
+#define S3C2410_GPC1_VCLK	(0x02 << 2)
+#define S3C2400_GPC1_VD1 	(0x02 << 2)
+
+#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
+#define S3C2410_GPC2_INP	(0x00 << 4)
+#define S3C2410_GPC2_OUTP	(0x01 << 4)
+#define S3C2410_GPC2_VLINE	(0x02 << 4)
+#define S3C2400_GPC2_VD2  	(0x02 << 4)
+
+#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
+#define S3C2410_GPC3_INP	(0x00 << 6)
+#define S3C2410_GPC3_OUTP	(0x01 << 6)
+#define S3C2410_GPC3_VFRAME	(0x02 << 6)
+#define S3C2400_GPC3_VD3   	(0x02 << 6)
+
+#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
+#define S3C2410_GPC4_INP	(0x00 << 8)
+#define S3C2410_GPC4_OUTP	(0x01 << 8)
+#define S3C2410_GPC4_VM		(0x02 << 8)
+#define S3C2400_GPC4_VD4	(0x02 << 8)
+
+#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
+#define S3C2410_GPC5_INP	(0x00 << 10)
+#define S3C2410_GPC5_OUTP	(0x01 << 10)
+#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
+#define S3C2400_GPC5_VD5   	(0x02 << 10)
+
+#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
+#define S3C2410_GPC6_INP	(0x00 << 12)
+#define S3C2410_GPC6_OUTP	(0x01 << 12)
+#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
+#define S3C2400_GPC6_VD6   	(0x02 << 12)
+
+#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
+#define S3C2410_GPC7_INP	(0x00 << 14)
+#define S3C2410_GPC7_OUTP	(0x01 << 14)
+#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
+#define S3C2400_GPC7_VD7   	(0x02 << 14)
+
+#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
+#define S3C2410_GPC8_INP	(0x00 << 16)
+#define S3C2410_GPC8_OUTP	(0x01 << 16)
+#define S3C2410_GPC8_VD0	(0x02 << 16)
+#define S3C2400_GPC8_VD8	(0x02 << 16)
+
+#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
+#define S3C2410_GPC9_INP	(0x00 << 18)
+#define S3C2410_GPC9_OUTP	(0x01 << 18)
+#define S3C2410_GPC9_VD1	(0x02 << 18)
+#define S3C2400_GPC9_VD9	(0x02 << 18)
+
+#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
+#define S3C2410_GPC10_INP	(0x00 << 20)
+#define S3C2410_GPC10_OUTP	(0x01 << 20)
+#define S3C2410_GPC10_VD2	(0x02 << 20)
+#define S3C2400_GPC10_VD10	(0x02 << 20)
+
+#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
+#define S3C2410_GPC11_INP	(0x00 << 22)
+#define S3C2410_GPC11_OUTP	(0x01 << 22)
+#define S3C2410_GPC11_VD3	(0x02 << 22)
+#define S3C2400_GPC11_VD11	(0x02 << 22)
+
+#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
+#define S3C2410_GPC12_INP	(0x00 << 24)
+#define S3C2410_GPC12_OUTP	(0x01 << 24)
+#define S3C2410_GPC12_VD4	(0x02 << 24)
+#define S3C2400_GPC12_VD12	(0x02 << 24)
+
+#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
+#define S3C2410_GPC13_INP	(0x00 << 26)
+#define S3C2410_GPC13_OUTP	(0x01 << 26)
+#define S3C2410_GPC13_VD5	(0x02 << 26)
+#define S3C2400_GPC13_VD13	(0x02 << 26)
+
+#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
+#define S3C2410_GPC14_INP	(0x00 << 28)
+#define S3C2410_GPC14_OUTP	(0x01 << 28)
+#define S3C2410_GPC14_VD6	(0x02 << 28)
+#define S3C2400_GPC14_VD14	(0x02 << 28)
+
+#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
+#define S3C2410_GPC15_INP	(0x00 << 30)
+#define S3C2410_GPC15_OUTP	(0x01 << 30)
+#define S3C2410_GPC15_VD7	(0x02 << 30)
+#define S3C2400_GPC15_VD15	(0x02 << 30)
+
+#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+ *
+ * S3C2400: Port D consists of 11 GPIO/Special function
+ *
+ * almost identical setup to port c
+*/
+
+#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
+
+#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
+#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
+#define S3C2410_GPD0_INP	(0x00 << 0)
+#define S3C2410_GPD0_OUTP	(0x01 << 0)
+#define S3C2410_GPD0_VD8	(0x02 << 0)
+#define S3C2400_GPD0_VFRAME	(0x02 << 0)
+#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
+
+#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
+#define S3C2410_GPD1_INP	(0x00 << 2)
+#define S3C2410_GPD1_OUTP	(0x01 << 2)
+#define S3C2410_GPD1_VD9	(0x02 << 2)
+#define S3C2400_GPD1_VM		(0x02 << 2)
+#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
+
+#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
+#define S3C2410_GPD2_INP	(0x00 << 4)
+#define S3C2410_GPD2_OUTP	(0x01 << 4)
+#define S3C2410_GPD2_VD10	(0x02 << 4)
+#define S3C2400_GPD2_VLINE	(0x02 << 4)
+
+#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
+#define S3C2410_GPD3_INP	(0x00 << 6)
+#define S3C2410_GPD3_OUTP	(0x01 << 6)
+#define S3C2410_GPD3_VD11	(0x02 << 6)
+#define S3C2400_GPD3_VCLK	(0x02 << 6)
+
+#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
+#define S3C2410_GPD4_INP	(0x00 << 8)
+#define S3C2410_GPD4_OUTP	(0x01 << 8)
+#define S3C2410_GPD4_VD12	(0x02 << 8)
+#define S3C2400_GPD4_LEND	(0x02 << 8)
+
+#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
+#define S3C2410_GPD5_INP	(0x00 << 10)
+#define S3C2410_GPD5_OUTP	(0x01 << 10)
+#define S3C2410_GPD5_VD13	(0x02 << 10)
+#define S3C2400_GPD5_TOUT0	(0x02 << 10)
+
+#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
+#define S3C2410_GPD6_INP	(0x00 << 12)
+#define S3C2410_GPD6_OUTP	(0x01 << 12)
+#define S3C2410_GPD6_VD14	(0x02 << 12)
+#define S3C2400_GPD6_TOUT1	(0x02 << 12)
+
+#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
+#define S3C2410_GPD7_INP	(0x00 << 14)
+#define S3C2410_GPD7_OUTP	(0x01 << 14)
+#define S3C2410_GPD7_VD15	(0x02 << 14)
+#define S3C2400_GPD7_TOUT2	(0x02 << 14)
+
+#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
+#define S3C2410_GPD8_INP	(0x00 << 16)
+#define S3C2410_GPD8_OUTP	(0x01 << 16)
+#define S3C2410_GPD8_VD16	(0x02 << 16)
+#define S3C2400_GPD8_TOUT3	(0x02 << 16)
+
+#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
+#define S3C2410_GPD9_INP	(0x00 << 18)
+#define S3C2410_GPD9_OUTP	(0x01 << 18)
+#define S3C2410_GPD9_VD17	(0x02 << 18)
+#define S3C2400_GPD9_TCLK0	(0x02 << 18)
+#define S3C2410_GPD9_MASK       (0x03 << 18)
+
+#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
+#define S3C2410_GPD10_INP	(0x00 << 20)
+#define S3C2410_GPD10_OUTP	(0x01 << 20)
+#define S3C2410_GPD10_VD18	(0x02 << 20)
+#define S3C2400_GPD10_nWAIT	(0x02 << 20)
+
+#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
+#define S3C2410_GPD11_INP	(0x00 << 22)
+#define S3C2410_GPD11_OUTP	(0x01 << 22)
+#define S3C2410_GPD11_VD19	(0x02 << 22)
+
+#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
+#define S3C2410_GPD12_INP	(0x00 << 24)
+#define S3C2410_GPD12_OUTP	(0x01 << 24)
+#define S3C2410_GPD12_VD20	(0x02 << 24)
+
+#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
+#define S3C2410_GPD13_INP	(0x00 << 26)
+#define S3C2410_GPD13_OUTP	(0x01 << 26)
+#define S3C2410_GPD13_VD21	(0x02 << 26)
+
+#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
+#define S3C2410_GPD14_INP	(0x00 << 28)
+#define S3C2410_GPD14_OUTP	(0x01 << 28)
+#define S3C2410_GPD14_VD22	(0x02 << 28)
+#define S3C2410_GPD14_nSS1	(0x03 << 28)
+
+#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
+#define S3C2410_GPD15_INP	(0x00 << 30)
+#define S3C2410_GPD15_OUTP	(0x01 << 30)
+#define S3C2410_GPD15_VD23	(0x02 << 30)
+#define S3C2410_GPD15_nSS0	(0x03 << 30)
+
+#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+ *
+ * S3C2400:
+ * Port E consists of 12 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+*/
+
+#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
+
+#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
+#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
+#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
+
+#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
+#define S3C2410_GPE0_INP       (0x00 << 0)
+#define S3C2410_GPE0_OUTP      (0x01 << 0)
+#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
+#define S3C2400_GPE0_EINT0     (0x02 << 0)
+#define S3C2410_GPE0_MASK      (0x03 << 0)
+
+#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
+#define S3C2410_GPE1_INP       (0x00 << 2)
+#define S3C2410_GPE1_OUTP      (0x01 << 2)
+#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
+#define S3C2400_GPE1_EINT1     (0x02 << 2)
+#define S3C2400_GPE1_nSS       (0x03 << 2)
+#define S3C2410_GPE1_MASK      (0x03 << 2)
+
+#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
+#define S3C2410_GPE2_INP       (0x00 << 4)
+#define S3C2410_GPE2_OUTP      (0x01 << 4)
+#define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
+#define S3C2400_GPE2_EINT2     (0x02 << 4)
+#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
+
+#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
+#define S3C2410_GPE3_INP       (0x00 << 6)
+#define S3C2410_GPE3_OUTP      (0x01 << 6)
+#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
+#define S3C2400_GPE3_EINT3     (0x02 << 6)
+#define S3C2400_GPE3_nCTS1     (0x03 << 6)
+#define S3C2410_GPE3_nSS0      (0x03 << 6)
+#define S3C2410_GPE3_MASK      (0x03 << 6)
+
+#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
+#define S3C2410_GPE4_INP       (0x00 << 8)
+#define S3C2410_GPE4_OUTP      (0x01 << 8)
+#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
+#define S3C2400_GPE4_EINT4     (0x02 << 8)
+#define S3C2400_GPE4_nRTS1     (0x03 << 8)
+#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
+#define S3C2410_GPE4_MASK      (0x03 << 8)
+
+#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
+#define S3C2410_GPE5_INP       (0x00 << 10)
+#define S3C2410_GPE5_OUTP      (0x01 << 10)
+#define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
+#define S3C2400_GPE5_EINT5     (0x02 << 10)
+#define S3C2400_GPE5_TCLK1     (0x03 << 10)
+
+#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
+#define S3C2410_GPE6_INP       (0x00 << 12)
+#define S3C2410_GPE6_OUTP      (0x01 << 12)
+#define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2400_GPE6_EINT6     (0x02 << 12)
+
+#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
+#define S3C2410_GPE7_INP       (0x00 << 14)
+#define S3C2410_GPE7_OUTP      (0x01 << 14)
+#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
+#define S3C2400_GPE7_EINT7     (0x02 << 14)
+
+#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
+#define S3C2410_GPE8_INP       (0x00 << 16)
+#define S3C2410_GPE8_OUTP      (0x01 << 16)
+#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
+#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
+
+#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
+#define S3C2410_GPE9_INP       (0x00 << 18)
+#define S3C2410_GPE9_OUTP      (0x01 << 18)
+#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
+#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
+#define S3C2400_GPE9_nXBACK    (0x03 << 18)
+
+#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
+#define S3C2410_GPE10_INP      (0x00 << 20)
+#define S3C2410_GPE10_OUTP     (0x01 << 20)
+#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
+#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
+
+#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
+#define S3C2410_GPE11_INP      (0x00 << 22)
+#define S3C2410_GPE11_OUTP     (0x01 << 22)
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
+#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
+
+#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
+#define S3C2410_GPE12_INP      (0x00 << 24)
+#define S3C2410_GPE12_OUTP     (0x01 << 24)
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
+#define S3C2410_GPE13_INP      (0x00 << 26)
+#define S3C2410_GPE13_OUTP     (0x01 << 26)
+#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
+
+#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
+#define S3C2410_GPE14_INP      (0x00 << 28)
+#define S3C2410_GPE14_OUTP     (0x01 << 28)
+#define S3C2410_GPE14_IICSCL   (0x02 << 28)
+#define S3C2410_GPE14_MASK     (0x03 << 28)
+
+#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
+#define S3C2410_GPE15_INP      (0x00 << 30)
+#define S3C2410_GPE15_OUTP     (0x01 << 30)
+#define S3C2410_GPE15_IICSDA   (0x02 << 30)
+#define S3C2410_GPE15_MASK     (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
+#define S3C2440_GPE2_ACRESET   (0x03 << 4)
+#define S3C2440_GPE3_ACIN      (0x03 << 6)
+#define S3C2440_GPE4_ACOUT     (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port F consists of 7 GPIO/Special function
+ *
+ * GPIO/serial/misc pins
+*/
+
+#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
+
+#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
+#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
+#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
+
+#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
+#define S3C2410_GPF0_INP    (0x00 << 0)
+#define S3C2410_GPF0_OUTP   (0x01 << 0)
+#define S3C2410_GPF0_EINT0  (0x02 << 0)
+#define S3C2400_GPF0_RXD0   (0x02 << 0)
+
+#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
+#define S3C2410_GPF1_INP    (0x00 << 2)
+#define S3C2410_GPF1_OUTP   (0x01 << 2)
+#define S3C2410_GPF1_EINT1  (0x02 << 2)
+#define S3C2400_GPF1_RXD1   (0x02 << 2)
+#define S3C2400_GPF1_IICSDA (0x03 << 2)
+
+#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
+#define S3C2410_GPF2_INP    (0x00 << 4)
+#define S3C2410_GPF2_OUTP   (0x01 << 4)
+#define S3C2410_GPF2_EINT2  (0x02 << 4)
+#define S3C2400_GPF2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
+#define S3C2410_GPF3_INP    (0x00 << 6)
+#define S3C2410_GPF3_OUTP   (0x01 << 6)
+#define S3C2410_GPF3_EINT3  (0x02 << 6)
+#define S3C2400_GPF3_TXD1   (0x02 << 6)
+#define S3C2400_GPF3_IICSCL (0x03 << 6)
+
+#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
+#define S3C2410_GPF4_INP    (0x00 << 8)
+#define S3C2410_GPF4_OUTP   (0x01 << 8)
+#define S3C2410_GPF4_EINT4  (0x02 << 8)
+#define S3C2400_GPF4_nRTS0  (0x02 << 8)
+#define S3C2400_GPF4_nXBACK (0x03 << 8)
+
+#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
+#define S3C2410_GPF5_INP    (0x00 << 10)
+#define S3C2410_GPF5_OUTP   (0x01 << 10)
+#define S3C2410_GPF5_EINT5  (0x02 << 10)
+#define S3C2400_GPF5_nCTS0  (0x02 << 10)
+#define S3C2400_GPF5_nXBREQ (0x03 << 10)
+
+#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
+#define S3C2410_GPF6_INP    (0x00 << 12)
+#define S3C2410_GPF6_OUTP   (0x01 << 12)
+#define S3C2410_GPF6_EINT6  (0x02 << 12)
+#define S3C2400_GPF6_CLKOUT (0x02 << 12)
+
+#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
+#define S3C2410_GPF7_INP    (0x00 << 14)
+#define S3C2410_GPF7_OUTP   (0x01 << 14)
+#define S3C2410_GPF7_EINT7  (0x02 << 14)
+
+#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port G consists of 10 GPIO/Special function
+*/
+
+#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
+
+#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
+#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
+#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
+
+#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
+#define S3C2410_GPG0_INP      (0x00 << 0)
+#define S3C2410_GPG0_OUTP     (0x01 << 0)
+#define S3C2410_GPG0_EINT8    (0x02 << 0)
+#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
+
+#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
+#define S3C2410_GPG1_INP      (0x00 << 2)
+#define S3C2410_GPG1_OUTP     (0x01 << 2)
+#define S3C2410_GPG1_EINT9    (0x02 << 2)
+#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
+
+#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
+#define S3C2410_GPG2_INP      (0x00 << 4)
+#define S3C2410_GPG2_OUTP     (0x01 << 4)
+#define S3C2410_GPG2_EINT10   (0x02 << 4)
+#define S3C2410_GPG2_nSS0     (0x03 << 4)
+#define S3C2400_GPG2_CDCLK    (0x02 << 4)
+
+#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
+#define S3C2410_GPG3_INP      (0x00 << 6)
+#define S3C2410_GPG3_OUTP     (0x01 << 6)
+#define S3C2410_GPG3_EINT11   (0x02 << 6)
+#define S3C2410_GPG3_nSS1     (0x03 << 6)
+#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
+#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
+
+#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
+#define S3C2410_GPG4_INP      (0x00 << 8)
+#define S3C2410_GPG4_OUTP     (0x01 << 8)
+#define S3C2410_GPG4_EINT12   (0x02 << 8)
+#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
+#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
+
+#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
+#define S3C2410_GPG5_INP      (0x00 << 10)
+#define S3C2410_GPG5_OUTP     (0x01 << 10)
+#define S3C2410_GPG5_EINT13   (0x02 << 10)
+#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
+#define S3C2400_GPG5_IICSDA   (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
+
+#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
+#define S3C2410_GPG6_INP      (0x00 << 12)
+#define S3C2410_GPG6_OUTP     (0x01 << 12)
+#define S3C2410_GPG6_EINT14   (0x02 << 12)
+#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
+#define S3C2400_GPG6_IICSCL   (0x03 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
+#define S3C2410_GPG7_INP      (0x00 << 14)
+#define S3C2410_GPG7_OUTP     (0x01 << 14)
+#define S3C2410_GPG7_EINT15   (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
+#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
+#define S3C2400_GPG7_IICSDA   (0x03 << 14)
+
+#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
+#define S3C2410_GPG8_INP      (0x00 << 16)
+#define S3C2410_GPG8_OUTP     (0x01 << 16)
+#define S3C2410_GPG8_EINT16   (0x02 << 16)
+#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
+#define S3C2400_GPG8_IICSCL   (0x03 << 16)
+
+#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
+#define S3C2410_GPG9_INP      (0x00 << 18)
+#define S3C2410_GPG9_OUTP     (0x01 << 18)
+#define S3C2410_GPG9_EINT17   (0x02 << 18)
+#define S3C2400_GPG9_SPICLK   (0x02 << 18)
+#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
+
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
+#define S3C2410_GPG10_INP     (0x00 << 20)
+#define S3C2410_GPG10_OUTP    (0x01 << 20)
+#define S3C2410_GPG10_EINT18  (0x02 << 20)
+
+#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
+#define S3C2410_GPG11_INP     (0x00 << 22)
+#define S3C2410_GPG11_OUTP    (0x01 << 22)
+#define S3C2410_GPG11_EINT19  (0x02 << 22)
+#define S3C2410_GPG11_TCLK1   (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
+
+#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
+#define S3C2410_GPG12_INP     (0x00 << 24)
+#define S3C2410_GPG12_OUTP    (0x01 << 24)
+#define S3C2410_GPG12_EINT20  (0x02 << 24)
+#define S3C2410_GPG12_XMON    (0x03 << 24)
+#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
+
+#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
+#define S3C2410_GPG13_INP     (0x00 << 26)
+#define S3C2410_GPG13_OUTP    (0x01 << 26)
+#define S3C2410_GPG13_EINT21  (0x02 << 26)
+#define S3C2410_GPG13_nXPON   (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
+
+#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
+#define S3C2410_GPG14_INP     (0x00 << 28)
+#define S3C2410_GPG14_OUTP    (0x01 << 28)
+#define S3C2410_GPG14_EINT22  (0x02 << 28)
+#define S3C2410_GPG14_YMON    (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
+
+#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
+#define S3C2410_GPG15_INP     (0x00 << 30)
+#define S3C2410_GPG15_OUTP    (0x01 << 30)
+#define S3C2410_GPG15_EINT23  (0x02 << 30)
+#define S3C2410_GPG15_nYPON   (0x03 << 30)
+#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
+
+#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
+#define S3C2410_GPH0_INP    (0x00 << 0)
+#define S3C2410_GPH0_OUTP   (0x01 << 0)
+#define S3C2410_GPH0_nCTS0  (0x02 << 0)
+
+#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
+#define S3C2410_GPH1_INP    (0x00 << 2)
+#define S3C2410_GPH1_OUTP   (0x01 << 2)
+#define S3C2410_GPH1_nRTS0  (0x02 << 2)
+
+#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
+#define S3C2410_GPH2_INP    (0x00 << 4)
+#define S3C2410_GPH2_OUTP   (0x01 << 4)
+#define S3C2410_GPH2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
+#define S3C2410_GPH3_INP    (0x00 << 6)
+#define S3C2410_GPH3_OUTP   (0x01 << 6)
+#define S3C2410_GPH3_RXD0   (0x02 << 6)
+
+#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
+#define S3C2410_GPH4_INP    (0x00 << 8)
+#define S3C2410_GPH4_OUTP   (0x01 << 8)
+#define S3C2410_GPH4_TXD1   (0x02 << 8)
+
+#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
+#define S3C2410_GPH5_INP    (0x00 << 10)
+#define S3C2410_GPH5_OUTP   (0x01 << 10)
+#define S3C2410_GPH5_RXD1   (0x02 << 10)
+
+#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
+#define S3C2410_GPH6_INP    (0x00 << 12)
+#define S3C2410_GPH6_OUTP   (0x01 << 12)
+#define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2410_GPH6_nRTS1  (0x03 << 12)
+
+#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
+#define S3C2410_GPH7_INP    (0x00 << 14)
+#define S3C2410_GPH7_OUTP   (0x01 << 14)
+#define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2410_GPH7_nCTS1  (0x03 << 14)
+
+#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
+#define S3C2410_GPH8_INP    (0x00 << 16)
+#define S3C2410_GPH8_OUTP   (0x01 << 16)
+#define S3C2410_GPH8_UCLK   (0x02 << 16)
+
+#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
+#define S3C2410_GPH9_INP      (0x00 << 18)
+#define S3C2410_GPH9_OUTP     (0x01 << 18)
+#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
+#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+
+#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
+#define S3C2410_GPH10_INP     (0x00 << 20)
+#define S3C2410_GPH10_OUTP    (0x01 << 20)
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
+/* miscellaneous control */
+#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
+#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
+#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
+
+#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
+#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
+#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
+
+#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
+#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
+#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
+#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
+
+#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
+#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
+
+#define S3C2410_MISCCR_USBDEV	    (0<<3)
+#define S3C2410_MISCCR_USBHOST	    (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
+
+#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
+
+#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
+#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
+
+#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
+
+/* values for S3C2410_EXTINT0/1/2 */
+#define S3C2410_EXTINT_LOWLEV	 (0x00)
+#define S3C2410_EXTINT_HILEV	 (0x01)
+#define S3C2410_EXTINT_FALLEDGE	 (0x02)
+#define S3C2410_EXTINT_RISEEDGE	 (0x04)
+#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
+
+/* interrupt filtering conrrol for EINT16..EINT23 */
+#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
+
+#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK		(0x00)
+#define S3C2410_EINTFLT_EXTCLK		(1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ * These move between s3c2410 and s3c2412 style systems.
+ */
+
+#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
+
+#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
+#define S3C2410_GSTATUS0_NCON	   (1<<2)
+#define S3C2410_GSTATUS0_RnB	   (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
+#define S3C2410_GSTATUS1_2410	   (0x32410000)
+#define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2440	   (0x32440000)
+#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+
+#define S3C2410_GSTATUS2_WTRESET   (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
+#define S3C2410_GSTATUS2_PONRESET  (1<<0)
+
+/* open drain control register */
+#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
+
+#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
+#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
+#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
+#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
+#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
+#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
+#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
+#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
+#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
+#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
+#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
+#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
+
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
+#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
+#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
+
+#define S3C2412_SLPCON_ALL_LOW	(0x0)
+#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
+#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
+#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
+
+#endif	/* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
new file mode 100644
index 00000000000..1202ca5e99f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
@@ -0,0 +1,106 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 GPIO J register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIOJ_H
+#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
+
+/* Port J consists of 13 GPIO/Camera pins
+ *
+ * GPJCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 Camera
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2440_GPIO_BANKJ  (416)
+
+#define S3C2440_GPJCON	    S3C2410_GPIOREG(0xd0)
+#define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
+#define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
+
+#define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
+
+#define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
+#define S3C2440_GPJ0_INP        (0x00 << 0)
+#define S3C2440_GPJ0_OUTP       (0x01 << 0)
+#define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
+
+#define S3C2440_GPJ1            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
+#define S3C2440_GPJ1_INP        (0x00 << 2)
+#define S3C2440_GPJ1_OUTP       (0x01 << 2)
+#define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
+
+#define S3C2440_GPJ2            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
+#define S3C2440_GPJ2_INP        (0x00 << 4)
+#define S3C2440_GPJ2_OUTP       (0x01 << 4)
+#define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
+
+#define S3C2440_GPJ3            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
+#define S3C2440_GPJ3_INP        (0x00 << 6)
+#define S3C2440_GPJ3_OUTP       (0x01 << 6)
+#define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
+
+#define S3C2440_GPJ4            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
+#define S3C2440_GPJ4_INP        (0x00 << 8)
+#define S3C2440_GPJ4_OUTP       (0x01 << 8)
+#define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
+
+#define S3C2440_GPJ5            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
+#define S3C2440_GPJ5_INP        (0x00 << 10)
+#define S3C2440_GPJ5_OUTP       (0x01 << 10)
+#define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
+
+#define S3C2440_GPJ6            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
+#define S3C2440_GPJ6_INP        (0x00 << 12)
+#define S3C2440_GPJ6_OUTP       (0x01 << 12)
+#define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
+
+#define S3C2440_GPJ7            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
+#define S3C2440_GPJ7_INP        (0x00 << 14)
+#define S3C2440_GPJ7_OUTP       (0x01 << 14)
+#define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
+
+#define S3C2440_GPJ8            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
+#define S3C2440_GPJ8_INP        (0x00 << 16)
+#define S3C2440_GPJ8_OUTP       (0x01 << 16)
+#define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
+
+#define S3C2440_GPJ9            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
+#define S3C2440_GPJ9_INP        (0x00 << 18)
+#define S3C2440_GPJ9_OUTP       (0x01 << 18)
+#define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
+
+#define S3C2440_GPJ10           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
+#define S3C2440_GPJ10_INP       (0x00 << 20)
+#define S3C2440_GPJ10_OUTP      (0x01 << 20)
+#define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
+
+#define S3C2440_GPJ11           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
+#define S3C2440_GPJ11_INP       (0x00 << 22)
+#define S3C2440_GPJ11_OUTP      (0x01 << 22)
+#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
+
+#define S3C2440_GPJ12           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
+#define S3C2440_GPJ12_INP       (0x00 << 24)
+#define S3C2440_GPJ12_OUTP      (0x01 << 24)
+#define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
+
+#define S3C2443_GPJ13		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
+#define S3C2443_GPJ14		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
+#define S3C2443_GPJ15		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
+
+#endif	/* __ASM_ARCH_REGS_GPIOJ_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
new file mode 100644
index 00000000000..de86ee8812b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -0,0 +1,43 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
+
+#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
new file mode 100644
index 00000000000..ee8f040aff5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
@@ -0,0 +1,162 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H
+
+#define S3C2410_LCDREG(x)	(x)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
+#define S3C2410_LCDCON1_MMODE	   (1<<7)
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
+#define S3C2410_LCDCON1_STN2GREY   (1<<1)
+#define S3C2410_LCDCON1_STN4GREY   (2<<1)
+#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
+#define S3C2410_LCDCON1_STN12BPP   (4<<1)
+
+#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
+
+#define S3C2410_LCDCON1_ENVID	   (1)
+
+#define S3C2410_LCDCON1_MODEMASK    0x1E
+
+#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
+#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
+#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
+
+#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
+#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
+
+/* LDCCON4 changes for STN mode on the S3C2412 */
+
+#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
+
+#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
+#define S3C2410_LCDCON5_FRM565	    (1<<11)
+#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
+#define S3C2410_LCDCON5_INVVLINE    (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
+#define S3C2410_LCDCON5_INVVD	    (1<<7)
+#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
+#define S3C2410_LCDCON5_INVPWREN    (1<<5)
+#define S3C2410_LCDCON5_INVLEND	    (1<<4)
+#define S3C2410_LCDCON5_PWREN	    (1<<3)
+#define S3C2410_LCDCON5_ENLEND	    (1<<2)
+#define S3C2410_LCDCON5_BSWP	    (1<<1)
+#define S3C2410_LCDCON5_HWSWP	    (1<<0)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x)	((x) << 21)
+#define S3C2410_LCDBASEU(x)	(x)
+
+#define S3C2410_OFFSIZE(x)	((x) << 11)
+#define S3C2410_PAGEWIDTH(x)	(x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
+
+#define S3C2410_TPAL_EN		(1<<24)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
+#define S3C2410_LCDINT_FIWSEL	(1<<2)
+#define	S3C2410_LCDINT_FRSYNC	(1<<1)
+#define S3C2410_LCDINT_FICNT	(1<<0)
+
+/* s3c2442 extra stn registers */
+
+#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
+#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
+#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
+#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
+
+#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
+
+/* S3C2412 registers */
+
+#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
+
+#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
+#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
+#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
+
+#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
+
+#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
+#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
+#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
+#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
+
+#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
+#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
+#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
+
+#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
+
+/* general registers */
+
+/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
+ * are available. */
+
+#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
+#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
+
+#define S3C24XX_LCDINTPND	(0x00)
+#define S3C24XX_LCDSRCPND	(0x04)
+#define S3C24XX_LCDINTMSK	(0x08)
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
new file mode 100644
index 00000000000..57759804e2f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -0,0 +1,220 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+*/
+
+#ifndef __ASM_ARM_MEMREGS_H
+#define __ASM_ARM_MEMREGS_H
+
+#ifndef S3C2410_MEMREG
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+/* bus width, and wait state control */
+#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
+
+/* bank zero config - note, pinstrapped from OM pins! */
+#define S3C2410_BWSCON_DW0_16		(1<<1)
+#define S3C2410_BWSCON_DW0_32		(2<<1)
+
+/* bank one configs */
+#define S3C2410_BWSCON_DW1_8		(0<<4)
+#define S3C2410_BWSCON_DW1_16		(1<<4)
+#define S3C2410_BWSCON_DW1_32		(2<<4)
+#define S3C2410_BWSCON_WS1		(1<<6)
+#define S3C2410_BWSCON_ST1		(1<<7)
+
+/* bank 2 configurations */
+#define S3C2410_BWSCON_DW2_8		(0<<8)
+#define S3C2410_BWSCON_DW2_16		(1<<8)
+#define S3C2410_BWSCON_DW2_32		(2<<8)
+#define S3C2410_BWSCON_WS2		(1<<10)
+#define S3C2410_BWSCON_ST2		(1<<11)
+
+/* bank 3 configurations */
+#define S3C2410_BWSCON_DW3_8		(0<<12)
+#define S3C2410_BWSCON_DW3_16		(1<<12)
+#define S3C2410_BWSCON_DW3_32		(2<<12)
+#define S3C2410_BWSCON_WS3		(1<<14)
+#define S3C2410_BWSCON_ST3		(1<<15)
+
+/* bank 4 configurations */
+#define S3C2410_BWSCON_DW4_8		(0<<16)
+#define S3C2410_BWSCON_DW4_16		(1<<16)
+#define S3C2410_BWSCON_DW4_32		(2<<16)
+#define S3C2410_BWSCON_WS4		(1<<18)
+#define S3C2410_BWSCON_ST4		(1<<19)
+
+/* bank 5 configurations */
+#define S3C2410_BWSCON_DW5_8		(0<<20)
+#define S3C2410_BWSCON_DW5_16		(1<<20)
+#define S3C2410_BWSCON_DW5_32		(2<<20)
+#define S3C2410_BWSCON_WS5		(1<<22)
+#define S3C2410_BWSCON_ST5		(1<<23)
+
+/* bank 6 configurations */
+#define S3C2410_BWSCON_DW6_8		(0<<24)
+#define S3C2410_BWSCON_DW6_16		(1<<24)
+#define S3C2410_BWSCON_DW6_32		(2<<24)
+#define S3C2410_BWSCON_WS6		(1<<26)
+#define S3C2410_BWSCON_ST6		(1<<27)
+
+/* bank 7 configurations */
+#define S3C2410_BWSCON_DW7_8		(0<<28)
+#define S3C2410_BWSCON_DW7_16		(1<<28)
+#define S3C2410_BWSCON_DW7_32		(2<<28)
+#define S3C2410_BWSCON_WS7		(1<<30)
+#define S3C2410_BWSCON_ST7		(1<<31)
+
+/* memory set (rom, ram) */
+#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
+#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
+#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
+#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
+#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
+#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
+#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
+#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
+
+/* bank configuration registers */
+
+#define S3C2410_BANKCON_PMCnorm		(0x00)
+#define S3C2410_BANKCON_PMC4		(0x01)
+#define S3C2410_BANKCON_PMC8		(0x02)
+#define S3C2410_BANKCON_PMC16		(0x03)
+
+/* bank configurations for banks 0..7, note banks
+ * 6 and 7 have differnt configurations depending on
+ * the memory type bits */
+
+#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
+#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
+#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
+#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
+#define S3C2410_BANKCON_Tacp_SHIFT	(2)
+
+#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
+#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
+#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
+#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
+#define S3C2410_BANKCON_Tcah_SHIFT	(4)
+
+#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
+#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
+#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
+#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
+#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
+
+#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
+#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
+#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
+#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
+#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
+#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
+#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
+#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
+#define S3C2410_BANKCON_Tacc_SHIFT	(8)
+
+#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
+#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
+#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
+#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
+#define S3C2410_BANKCON_Tcos_SHIFT	(11)
+
+#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
+#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
+#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
+#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
+#define S3C2410_BANKCON_Tacs_SHIFT	(13)
+
+#define S3C2410_BANKCON_SRAM		(0x0 << 15)
+#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
+#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
+
+/* next bits only for EDO DRAM in 6,7 */
+#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
+
+/* CAS pulse width */
+#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
+#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
+
+/* CAS pre-charge */
+#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
+#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
+
+/* control column address select */
+#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
+#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
+#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
+#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
+
+/* next bits only for SDRAM in 6,7 */
+#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
+#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
+#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
+
+/* control column address select */
+#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
+#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
+#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
+
+#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
+#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
+#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
+#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
+
+/* refresh control */
+
+#define S3C2410_REFRESH_REFEN		(1<<23)
+#define S3C2410_REFRESH_SELF		(1<<22)
+#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
+
+#define S3C2410_REFRESH_TRP_MASK	(3<<20)
+#define S3C2410_REFRESH_TRP_2clk	(0<<20)
+#define S3C2410_REFRESH_TRP_3clk	(1<<20)
+#define S3C2410_REFRESH_TRP_4clk	(2<<20)
+
+#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
+#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
+#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
+#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
+#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
+
+#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
+#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
+#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
+#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
+#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
+
+
+/* mode select register(s) */
+
+#define  S3C2410_MRSRB_CL1		(0x00 << 4)
+#define  S3C2410_MRSRB_CL2		(0x02 << 4)
+#define  S3C2410_MRSRB_CL3		(0x03 << 4)
+
+/* bank size register */
+#define S3C2410_BANKSIZE_128M		(0x2 << 0)
+#define S3C2410_BANKSIZE_64M		(0x1 << 0)
+#define S3C2410_BANKSIZE_32M		(0x0 << 0)
+#define S3C2410_BANKSIZE_16M		(0x7 << 0)
+#define S3C2410_BANKSIZE_8M		(0x6 << 0)
+#define S3C2410_BANKSIZE_4M		(0x5 << 0)
+#define S3C2410_BANKSIZE_2M		(0x4 << 0)
+#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
+#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
+#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
+#define S3C2410_BANKSIZE_BURST		(1<<7)
+
+#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
new file mode 100644
index 00000000000..2d36353f57d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -0,0 +1,40 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-power.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX power control register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON	S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG		S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0		S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1		S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2		S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3		S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ			(1<<0)
+#define S3C2412_PWRCFG_BATF_IGNORE		(2<<0)
+#define S3C2412_PWRCFG_BATF_SLEEP		(3<<0)
+#define S3C2412_PWRCFG_BATF_MASK		(3<<0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3<<6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ		(1<<8)
+#define S3C2412_PWRCFG_NAND_NORST		(1<<9)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
new file mode 100644
index 00000000000..a4bf2712317
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2412_MEM
+#define __ASM_ARM_REGS_S3C2412_MEM
+
+#ifndef S3C2412_MEMREG
+#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
+#define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
+#define S3C2412_BANKCON2		S3C2412_MEMREG(0x08)
+#define S3C2412_BANKCON3		S3C2412_MEMREG(0x0C)
+
+#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
+#define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
+
+#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
new file mode 100644
index 00000000000..aa69dc79bc3
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
+ *
+ * Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_H
+#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
+
+#define S3C2412_SWRST		(S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET	(0x533C2412)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif	/* __ASM_ARCH_REGS_S3C2412_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
new file mode 100644
index 00000000000..6026d091a2f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -0,0 +1,195 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2443 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT	16
+#define S3C2443_PLLCON_PDIVSHIFT	8
+#define S3C2443_PLLCON_SDIVSHIFT	0
+#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK		(3)
+
+#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
+
+#define S3C2443_SWRST_RESET		(0x533c2443)
+
+#define S3C2443_PLLCON_OFF		(1<<24)
+
+#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
+#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
+#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
+
+#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
+#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
+#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
+
+#define S3C2443_CLKDIV0_DVS		(1<<13)
+#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
+
+#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
+#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
+
+/* S3C2443_CLKDIV1 */
+
+#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
+#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
+
+#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
+#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
+
+#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
+#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
+
+#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
+#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
+
+#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
+#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
+
+#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0		(1<<0)
+#define S3C2443_HCLKCON_DMA1		(1<<1)
+#define S3C2443_HCLKCON_DMA2		(1<<2)
+#define S3C2443_HCLKCON_DMA3		(1<<3)
+#define S3C2443_HCLKCON_DMA4		(1<<4)
+#define S3C2443_HCLKCON_DMA5		(1<<5)
+#define S3C2443_HCLKCON_CAMIF		(1<<8)
+#define S3C2443_HCLKCON_DISP		(1<<9)
+#define S3C2443_HCLKCON_LCDC		(1<<10)
+#define S3C2443_HCLKCON_USBH		(1<<11)
+#define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2443_HCLKCON_HSMMC		(1<<16)
+#define S3C2443_HCLKCON_CFC		(1<<17)
+#define S3C2443_HCLKCON_SSMC		(1<<18)
+#define S3C2443_HCLKCON_DRAMC		(1<<19)
+
+#define S3C2443_PCLKCON_UART0		(1<<0)
+#define S3C2443_PCLKCON_UART1		(1<<1)
+#define S3C2443_PCLKCON_UART2		(1<<2)
+#define S3C2443_PCLKCON_UART3		(1<<3)
+#define S3C2443_PCLKCON_IIC		(1<<4)
+#define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_ADC		(1<<7)
+#define S3C2443_PCLKCON_AC97		(1<<8)
+#define S3C2443_PCLKCON_IIS		(1<<9)
+#define S3C2443_PCLKCON_PWMT		(1<<10)
+#define S3C2443_PCLKCON_WDT		(1<<11)
+#define S3C2443_PCLKCON_RTC		(1<<12)
+#define S3C2443_PCLKCON_GPIO		(1<<13)
+#define S3C2443_PCLKCON_SPI0		(1<<14)
+#define S3C2443_PCLKCON_SPI1		(1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK		(1<<16)
+#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
+#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
+#define S3C2443_SCLKCON_CAMCLK		(1<<11)
+#define S3C2443_SCLKCON_DISPCLK		(1<<10)
+#define S3C2443_SCLKCON_I2SCLK		(1<<9)
+#define S3C2443_SCLKCON_UARTCLK		(1<<8)
+#define S3C2443_SCLKCON_USBHOST		(1<<1)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
new file mode 100644
index 00000000000..cbf2d8884e3
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
@@ -0,0 +1,127 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 MMC/SDIO register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_SDI
+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
+
+#define S3C2410_SDICON                (0x00)
+#define S3C2410_SDIPRE                (0x04)
+#define S3C2410_SDICMDARG             (0x08)
+#define S3C2410_SDICMDCON             (0x0C)
+#define S3C2410_SDICMDSTAT            (0x10)
+#define S3C2410_SDIRSP0               (0x14)
+#define S3C2410_SDIRSP1               (0x18)
+#define S3C2410_SDIRSP2               (0x1C)
+#define S3C2410_SDIRSP3               (0x20)
+#define S3C2410_SDITIMER              (0x24)
+#define S3C2410_SDIBSIZE              (0x28)
+#define S3C2410_SDIDCON               (0x2C)
+#define S3C2410_SDIDCNT               (0x30)
+#define S3C2410_SDIDSTA               (0x34)
+#define S3C2410_SDIFSTA               (0x38)
+
+#define S3C2410_SDIDATA               (0x3C)
+#define S3C2410_SDIIMSK               (0x40)
+
+#define S3C2440_SDIDATA               (0x40)
+#define S3C2440_SDIIMSK               (0x3C)
+
+#define S3C2440_SDICON_SDRESET        (1<<8)
+#define S3C2440_SDICON_MMCCLOCK       (1<<5)
+#define S3C2410_SDICON_BYTEORDER      (1<<4)
+#define S3C2410_SDICON_SDIOIRQ        (1<<3)
+#define S3C2410_SDICON_RWAITEN        (1<<2)
+#define S3C2410_SDICON_FIFORESET      (1<<1)
+#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
+
+#define S3C2410_SDICMDCON_ABORT       (1<<12)
+#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
+#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
+#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
+#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
+#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
+#define S3C2410_SDICMDCON_INDEX       (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
+#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
+#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
+#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
+#define S3C2410_SDICMDSTAT_INDEX      (0xff)
+
+#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
+#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
+#define S3C2440_SDIDCON_DS_WORD       (2<<22)
+#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
+#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
+#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
+#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
+#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
+#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
+#define S3C2410_SDIDCON_DMAEN         (1<<15)
+#define S3C2410_SDIDCON_STOP          (1<<14)
+#define S3C2440_SDIDCON_DATSTART      (1<<14)
+#define S3C2410_SDIDCON_DATMODE	      (3<<12)
+#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
+
+/* constants for S3C2410_SDIDCON_DATMODE */
+#define S3C2410_SDIDCON_XFER_READY    (0<<12)
+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
+#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
+#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK   (0xFFF)
+#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
+
+#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
+#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
+#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
+#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
+#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
+#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
+#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
+#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
+#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
+#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
+
+#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
+#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
+#define S3C2410_SDIFSTA_TFDET          (1<<13)
+#define S3C2410_SDIFSTA_RFDET          (1<<12)
+#define S3C2410_SDIFSTA_TFHALF         (1<<11)
+#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
+#define S3C2410_SDIFSTA_RFLAST         (1<<9)
+#define S3C2410_SDIFSTA_RFFULL         (1<<8)
+#define S3C2410_SDIFSTA_RFHALF         (1<<7)
+#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
+#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
+#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
+#define S3C2410_SDIIMSK_READWAIT       (1<<13)
+#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
+#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
+#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
+#define S3C2410_SDIIMSK_DATACRC        (1<<9)
+#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
+#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
+#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
+#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
+#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
+#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
+#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
+#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
+#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
+
+#endif /* __ASM_ARM_REGS_SDI */
diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
new file mode 100644
index 00000000000..f8c9387b049
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/reset.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-s3c2410/include/mach/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
new file mode 100644
index 00000000000..3fe8be9ca11
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPIGPIO_H
+#define __ASM_ARCH_SPIGPIO_H __FILE__
+
+struct s3c2410_spigpio_info {
+	unsigned long		 pin_clk;
+	unsigned long		 pin_mosi;
+	unsigned long		 pin_miso;
+
+	int			 bus_num;
+
+	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+};
+
+
+#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
new file mode 100644
index 00000000000..921b13b4f0a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/include/mach/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info {
+	unsigned long		 pin_cs;	/* simple gpio cs */
+	unsigned int		 num_cs;	/* total chipselects */
+	int			 bus_num;       /* bus number to use. */
+
+	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
new file mode 100644
index 00000000000..ec2defebf0d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c/regs-watchdog.h>
+#include <mach/regs-clock.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+
+extern void (*s3c24xx_reset_hook)(void);
+
+static void
+arch_reset(char mode)
+{
+	struct clk *wdtclk;
+
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+
+	if (s3c24xx_reset_hook)
+		s3c24xx_reset_hook();
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	wdtclk = clk_get(NULL, "watchdog");
+	if (!IS_ERR(wdtclk)) {
+		clk_enable(wdtclk);
+	} else
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+
+	/* we'll take a jump through zero as a poor second */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
new file mode 100644
index 00000000000..e9f676bc011
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -0,0 +1,58 @@
+/* arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <mach/map.h>
+#include <mach/idle.h>
+#include <mach/reset.h>
+
+#include <mach/regs-clock.h>
+
+void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
+
+void s3c24xx_default_idle(void)
+{
+	unsigned long tmp;
+	int i;
+
+	/* idle the system by using the idle mode which will wait for an
+	 * interrupt to happen before restarting the system.
+	 */
+
+	/* Warning: going into idle state upsets jtag scanning */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+
+	/* the samsung port seems to do a loop and then unset idle.. */
+	for (i = 0; i < 50; i++) {
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+	}
+
+	/* this bit is not cleared on re-start... */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+}
+
+static void arch_idle(void)
+{
+	if (s3c24xx_idle != NULL)
+		(s3c24xx_idle)();
+	else
+		s3c24xx_default_idle();
+}
+
+#include <mach/system-reset.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
new file mode 100644
index 00000000000..2a425ed0a7e
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+
+#define CLOCK_TICK_RATE 12000000
+
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
new file mode 100644
index 00000000000..708e47459ff
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -0,0 +1,52 @@
+/* arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * Copyright (c) 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/regs-gpio.h>
+#include <mach/map.h>
+
+/* working in physical space... */
+#undef S3C2410_GPIOREG
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+
+#include <asm/plat-s3c/uncompress.h>
+
+static inline int is_arm926(void)
+{
+	unsigned int cpuid;
+
+	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
+
+	return ((cpuid & 0xff0) == 0x260);
+}
+
+static void arch_detect_cpu(void)
+{
+	unsigned int cpuid;
+
+	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+	cpuid &= S3C2410_GSTATUS1_IDMASK;
+
+	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
+	    cpuid == S3C2410_GSTATUS1_2442) {
+		fifo_mask = S3C2440_UFSTAT_TXMASK;
+		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+	} else {
+		fifo_mask = S3C2410_UFSTAT_TXMASK;
+		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
+	}
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/usb-control.h b/arch/arm/mach-s3c2410/include/mach/usb-control.h
new file mode 100644
index 00000000000..cd91d1591f3
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/usb-control.h
@@ -0,0 +1,41 @@
+/* arch/arm/mach-s3c2410/include/mach/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - usb port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
+
+#define S3C_HCDFLG_USED	(1)
+
+struct s3c2410_hcd_port {
+	unsigned char	flags;
+	unsigned char	power;
+	unsigned char	oc_status;
+	unsigned char	oc_changed;
+};
+
+struct s3c2410_hcd_info {
+	struct usb_hcd		*hcd;
+	struct s3c2410_hcd_port	port[2];
+
+	void		(*power_control)(int port, int to);
+	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
+	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+	if (info->report_oc != NULL) {
+		(info->report_oc)(info, ports);
+	}
+}
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
new file mode 100644
index 00000000000..315b0078a34
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
new file mode 100644
index 00000000000..e4119913d7c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VR1000CPLD_H
+#define __ASM_ARCH_VR1000CPLD_H
+
+#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
+
+#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
new file mode 100644
index 00000000000..f53f85b4ad8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VR1000IRQ_H
+#define __ASM_ARCH_VR1000IRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC	     IRQ_EINT19
+#define IRQ_IDE0	     IRQ_EINT16
+#define IRQ_IDE1	     IRQ_EINT17
+#define IRQ_VR1000_SERIAL    IRQ_EINT12
+#define IRQ_VR1000_DM9000A   IRQ_EINT10
+#define IRQ_VR1000_DM9000N   IRQ_EINT9
+#define IRQ_SMALERT	     IRQ_EINT8
+
+#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
new file mode 100644
index 00000000000..99612fcc4eb
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
@@ -0,0 +1,110 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_VR1000MAP_H
+#define __ASM_ARCH_VR1000MAP_H
+
+#include <mach/bast-map.h>
+
+#define VR1000_IOADDR(x) BAST_IOADDR(x)
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
+#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
+#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
+#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
+#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI	   (0x02000000)
+#define VR1000_PA_IDEPRIAUX	   (0x02800000)
+#define VR1000_PA_IDESEC	   (0x03000000)
+#define VR1000_PA_IDESECAUX	   (0x03800000)
+#define VR1000_PA_DM9000	   (0x05000000)
+
+#define VR1000_PA_SERIAL	   (0x11800000)
+#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS	 VR1000_VAM_CS4
+
+#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index a67a0685664..f0de3c23ce7 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -42,15 +42,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 965f2712970..24c6334fac8 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -29,24 +29,24 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -562,7 +562,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&bast_sio,
 };
 
-static struct clk *bast_clocks[] = {
+static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7c1145e87c1..e35933a46d1 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,19 +25,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
 
-#include <asm/arch/h1940.h>
-#include <asm/arch/h1940-latch.h>
-#include <asm/arch/fb.h>
+#include <mach/h1940.h>
+#include <mach/h1940-latch.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 43c2e915c5b..80fe2ed0775 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -26,15 +26,15 @@
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fb.h>
-#include <asm/arch/leds-gpio.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/fb.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 717af40e447..606ee15911b 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -22,15 +22,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/otom-map.h>
+#include <mach/otom-map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index a1caf4b0ada..7d34844debd 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -42,19 +42,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/spi.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 226550504c8..b88939d7228 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2004 by FS Forth-Systeme GmbH
  * All rights reserved.
  *
- * $Id: mach-smdk2410.c,v 1.1 2004/05/11 14:15:38 mpietrek Exp $
  * @Author: Jonas Dietsche
  *
  * This program is free software; you can redistribute it and/or
@@ -42,7 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index d90d445ccfb..ec87306a8c2 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -39,7 +39,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 9a0965ac5e1..fbc0213d548 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -30,19 +30,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/vr1000-map.h>
-#include <asm/arch/vr1000-irq.h>
-#include <asm/arch/vr1000-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/vr1000-map.h>
+#include <mach/vr1000-irq.h>
+#include <mach/vr1000-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
@@ -344,7 +344,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&vr1000_led3,
 };
 
-static struct clk *vr1000_clocks[] = {
+static struct clk *vr1000_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index f44e21b9c3b..598d130633d 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -26,10 +26,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-cpld.h>
 
+#include "nor-simtec.h"
 
 static void simtec_nor_vpp(struct map_info *map, int vpp)
 {
@@ -50,7 +51,7 @@ static void simtec_nor_vpp(struct map_info *map, int vpp)
 	local_irq_restore(flags);
 }
 
-struct physmap_flash_data simtec_nor_pdata = {
+static struct physmap_flash_data simtec_nor_pdata = {
 	.width		= 2,
 	.set_vpp	= simtec_nor_vpp,
 	.nr_parts	= 0,
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S
index 7d66de7ff7d..c93bf2db9f4 100644
--- a/arch/arm/mach-s3c2410/pm-h1940.S
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -20,10 +20,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 	.text
 	.global	h1940_pm_return
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 3b3a7db4e0d..ba43ff9e816 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -26,13 +26,13 @@
 #include <linux/time.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
+#include <mach/regs-gpio.h>
+#include <mach/h1940.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 0e7991940f8..5d977f9c88a 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -24,11 +24,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 8a9c5a2bb25..be37f221a17 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 	/* s3c2410_cpu_suspend
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6aec86a5da5..4dacf8a1750 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -26,12 +26,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/usb-control.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/usb-control.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 1157b5a1626..af4b2ce516f 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 1dd86499356..22fc04a3b53 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
index 8e55c3a2eab..f7afece7fc3 100644
--- a/arch/arm/mach-s3c2412/gpio.c
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -20,9 +20,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index cc1917bf952..ac62b79044f 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -25,15 +25,15 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-power.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-power.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/irq.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 7f592471348..ad980a1690c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -26,9 +26,6 @@
 
 #include <linux/spi/spi.h>
 
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -37,12 +34,12 @@
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/spi-gpio.h>
+#include <mach/fb.h>
 
 #include <asm/mach-types.h>
 
@@ -398,7 +395,7 @@ static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
-	.bus_num	= 0,
+	.bus_num	= 1,
 	.pin_clk	= S3C2410_GPG8,
 	.pin_mosi	= S3C2410_GPB8,
 	.chip_select	= jive_lcd_spi_chipselect,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index b126a530daa..80affb1ee4c 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -24,7 +24,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/setup.h>
 #include <asm/io.h>
@@ -33,12 +33,12 @@
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
+#include <mach/idle.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2412.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 32982547cd6..7a08b378991 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -27,18 +27,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index d4ffb2d9807..737523a4e03 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -19,14 +19,14 @@
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 98a0de924c2..d278010b9f6 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -25,22 +25,22 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/reset.h>
-#include <asm/arch/idle.h>
+#include <mach/reset.h>
+#include <mach/idle.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/regs-s3c2412.h>
+#include <mach/regs-s3c2412.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
index db32cac4199..c82418ed714 100644
--- a/arch/arm/mach-s3c2412/sleep.S
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -22,10 +22,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 
 	.text
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 184d804934c..95567e6daea 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 0b1260827ac..cdd4e6e79ac 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 2995ff5681b..c0c67438d0a 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -20,12 +20,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index a87608bc1a0..276b823f4e2 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 09af8b23500..441f4bc0947 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -27,19 +27,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/anubis-map.h>
-#include <asm/arch/anubis-irq.h>
-#include <asm/arch/anubis-cpld.h>
+#include <mach/anubis-map.h>
+#include <mach/anubis-irq.h>
+#include <mach/anubis-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
@@ -414,7 +414,7 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&anubis_device_sm501,
 };
 
-static struct clk *anubis_clocks[] = {
+static struct clk *anubis_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index f5e3c7f2763..f0f0cc6afcf 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -27,14 +27,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index afe0d7b7e38..1a5e7027b41 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -29,13 +29,13 @@
 #include <asm/mach/irq.h>
 
 #include <asm/setup.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index af996b0e91e..8b83f93b610 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -25,18 +25,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/osiris-map.h>
-#include <asm/arch/osiris-cpld.h>
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
@@ -341,7 +341,7 @@ static struct platform_device *osiris_devices[] __initdata = {
 	&osiris_pcmcia,
 };
 
-static struct clk *osiris_clocks[] = {
+static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_dclk0,
 	&s3c24xx_dclk1,
 	&s3c24xx_clkout0,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bac40c4878a..e0b07e6a0a1 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -33,18 +33,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/h1940.h>
+#include <mach/h1940.h>
 #include <asm/plat-s3c/nand.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 4552828bf80..327c8f37198 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 90e1da61fbc..d6b9a92d284 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -25,7 +25,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 2d030d439fe..569b5c3d334 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 17f064fabda..6a8d7cced4a 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -34,10 +34,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
+#include <mach/regs-s3c2443-clock.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index f6c006d4297..c1ff03aebfd 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index f9ad498a6fc..9674de7223f 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 8cd93130ef3..e3c0d587bd1 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 9ce490560af..37793f924b5 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -25,12 +25,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
-#include <asm/arch/reset.h>
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/reset.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8e0244631d6..8a5546e6d54 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -46,9 +46,6 @@ led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o
 # LEDs support
 obj-$(CONFIG_LEDS) += $(led-y)
 
-# SA1110 USB client support
-#obj-$(CONFIG_SA1100_USB)		+= usb/
-
 # Miscelaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index be06d668a3c..55e64477a87 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/irda.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/mcp.h>
+#include <mach/assabet.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 842d9e6dc5f..3efefbdd252 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -23,10 +23,10 @@
 #include <linux/mtd/partitions.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -34,7 +34,7 @@
 #include <asm/hardware/sa1111.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 31afe50d7cd..fd3ad9cfc91 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -28,8 +28,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/cerf.h>
-#include <asm/arch/mcp.h>
+#include <mach/cerf.h>
+#include <mach/mcp.h>
 #include "generic.h"
 
 static struct resource cerfuart2_resources[] = {
@@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = {
 static void __init cerf_init_irq(void)
 {
 	sa1100_init_irq();
-	set_irq_type(CERF_ETH_IRQ, IRQT_RISING);
+	set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
 }
 
 static struct map_desc cerf_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index fc97fe57ee6..43c30f84abf 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,7 +11,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Very simple clock implementation - we only have one clock to
@@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
 }
 
 static struct clk clk_gpio27 = {
-	.name		= "GPIO27_CLK",
+	.name		= "SA1111_CLK",
 	.rate		= 3686400,
 	.enable		= clk_gpio27_enable,
 	.disable	= clk_gpio27_disable,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2f772a3965c..fe289997cfa 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,11 +26,11 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -40,7 +40,7 @@
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index 94620be7bfa..b1161fc8060 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -24,11 +24,10 @@
 #include <linux/platform_device.h>
 
 #include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 #include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/sharpsl_pm.h>
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 343368aa82d..da3a898a6d6 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,7 +88,7 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 36b47ff5af1..029dbfbbafc 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2001 Russell King
  *
- *  $Id: cpu-sa1110.c,v 1.9 2002/07/06 16:53:18 rmk Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -26,7 +24,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index e5080286060..f990a3e8584 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -18,7 +18,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
 
@@ -76,7 +76,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
  * 	address of the hardware registers for that channel as the channel
  * 	identifier. This identifier is written to the location pointed by
  * 	@dma_regs. The list of possible values for @device are listed into
- * 	linux/include/asm-arm/arch-sa1100/dma.h as a dma_device_t enum.
+ * 	arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
  *
  * 	Note that reading from a port and writing to the same port are
  * 	actually considered as two different streams requiring separate
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 0c2fa1c4fb4..b422526f6d8 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -18,10 +18,10 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>	/* just for sched_clock() - funny that */
 #include <linux/platform_device.h>
+#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
@@ -31,6 +31,9 @@
 
 #include "generic.h"
 
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
 #define NR_FREQS	16
 
 /*
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
index 372f1f4f54a..0d3829a8c2c 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/arch/arm/mach-sa1100/gpio.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "generic.h"
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 8473c37b77d..af25a78d705 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -30,7 +30,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -41,14 +41,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
 
 #if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
-#include <asm/arch/h3600_gpio.h>
+#include <mach/h3600_gpio.h>
 #endif
 
 #ifdef CONFIG_SA1100_H3800
-#include <asm/arch/h3600_asic.h>
+#include <mach/h3600_asic.h>
 #endif
 
 #include "generic.h"
@@ -681,7 +681,7 @@ static struct ipaq_model_ops h3800_model_ops __initdata = {
 
 #define MAX_ASIC_ISR_LOOPS    20
 
-/* The order of these is important - see #include <asm/arch/irqs.h> */
+/* The order of these is important - see #include <mach/irqs.h> */
 static u32 kpio_irq_mask[] = {
 	KPIO_KEY_ALL,
 	KPIO_SPI_INT,
@@ -834,7 +834,7 @@ static void __init h3800_init_irq(void)
 		set_irq_chip(irq, &h3800_gpio_irqchip);
 	}
 #endif
-	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
+	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 046b213efd5..e7056c0b562 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
new file mode 100644
index 00000000000..62aaf04a390
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -0,0 +1,2072 @@
+/*
+ *	FILE    	SA-1100.h
+ *
+ *	Version 	1.2
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	January 1998 (April 1997)
+ *	System  	StrongARM SA-1100
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of constants related to the StrongARM
+ *	        	SA-1100 microprocessor (Advanced RISC Machine (ARM)
+ *	        	architecture version 4). This file is based on the
+ *	        	StrongARM SA-1100 data sheet version 2.2.
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1100.h
+#endif
+
+#include "bitfield.h"
+
+/*
+ * SA1100 CS line to physical address
+ */
+
+#define SA1100_CS0_PHYS	0x00000000
+#define SA1100_CS1_PHYS	0x08000000
+#define SA1100_CS2_PHYS	0x10000000
+#define SA1100_CS3_PHYS	0x18000000
+#define SA1100_CS4_PHYS	0x40000000
+#define SA1100_CS5_PHYS	0x48000000
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
+                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
+                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
+
+
+/*
+ * Universal Serial Bus (USB) Device Controller (UDC) control registers
+ *
+ * Registers
+ *    Ser0UDCCR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control Register (read/write).
+ *    Ser0UDCAR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Address Register (read/write).
+ *    Ser0UDCOMP	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Output Maximum Packet size register
+ *              	(read/write).
+ *    Ser0UDCIMP	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Input Maximum Packet size register
+ *              	(read/write).
+ *    Ser0UDCCS0	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 0
+ *              	(read/write).
+ *    Ser0UDCCS1	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 1
+ *              	(output, read/write).
+ *    Ser0UDCCS2	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 2
+ *              	(input, read/write).
+ *    Ser0UDCD0 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Data register end-point 0
+ *              	(read/write).
+ *    Ser0UDCWC 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Write Count register end-point 0
+ *              	(read).
+ *    Ser0UDCDR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Data Register (read/write).
+ *    Ser0UDCSR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Status Register (read/write).
+ */
+
+#define Ser0UDCCR	__REG(0x80000000)  /* Ser. port 0 UDC Control Reg. */
+#define Ser0UDCAR	__REG(0x80000004)  /* Ser. port 0 UDC Address Reg. */
+#define Ser0UDCOMP	__REG(0x80000008)  /* Ser. port 0 UDC Output Maximum Packet size reg. */
+#define Ser0UDCIMP	__REG(0x8000000C)  /* Ser. port 0 UDC Input Maximum Packet size reg. */
+#define Ser0UDCCS0	__REG(0x80000010)  /* Ser. port 0 UDC Control/Status reg. end-point 0 */
+#define Ser0UDCCS1	__REG(0x80000014)  /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
+#define Ser0UDCCS2	__REG(0x80000018)  /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
+#define Ser0UDCD0	__REG(0x8000001C)  /* Ser. port 0 UDC Data reg. end-point 0 */
+#define Ser0UDCWC	__REG(0x80000020)  /* Ser. port 0 UDC Write Count reg. end-point 0 */
+#define Ser0UDCDR	__REG(0x80000028)  /* Ser. port 0 UDC Data Reg. */
+#define Ser0UDCSR	__REG(0x80000030)  /* Ser. port 0 UDC Status Reg. */
+
+#define UDCCR_UDD	0x00000001	/* UDC Disable                     */
+#define UDCCR_UDA	0x00000002	/* UDC Active (read)               */
+#define UDCCR_RESIM	0x00000004	/* Resume Interrupt Mask, per errata */
+#define UDCCR_EIM	0x00000008	/* End-point 0 Interrupt Mask      */
+                	        	/* (disable)                       */
+#define UDCCR_RIM	0x00000010	/* Receive Interrupt Mask          */
+                	        	/* (disable)                       */
+#define UDCCR_TIM	0x00000020	/* Transmit Interrupt Mask         */
+                	        	/* (disable)                       */
+#define UDCCR_SRM	0x00000040	/* Suspend/Resume interrupt Mask   */
+                	        	/* (disable)                       */
+#define UDCCR_SUSIM	UDCCR_SRM	/* Per errata, SRM just masks suspend */
+#define UDCCR_REM	0x00000080	/* REset interrupt Mask (disable)  */
+
+#define UDCAR_ADD	Fld (7, 0)	/* function ADDress                */
+
+#define UDCOMP_OUTMAXP	Fld (8, 0)	/* OUTput MAXimum Packet size - 1  */
+                	        	/* [byte]                          */
+#define UDCOMP_OutMaxPkt(Size)  	/* Output Maximum Packet size      */ \
+                	        	/* [1..256 byte]                   */ \
+                	(((Size) - 1) << FShft (UDCOMP_OUTMAXP))
+
+#define UDCIMP_INMAXP	Fld (8, 0)	/* INput MAXimum Packet size - 1   */
+                	        	/* [byte]                          */
+#define UDCIMP_InMaxPkt(Size)   	/* Input Maximum Packet size       */ \
+                	        	/* [1..256 byte]                   */ \
+                	(((Size) - 1) << FShft (UDCIMP_INMAXP))
+
+#define UDCCS0_OPR	0x00000001	/* Output Packet Ready (read)      */
+#define UDCCS0_IPR	0x00000002	/* Input Packet Ready              */
+#define UDCCS0_SST	0x00000004	/* Sent STall                      */
+#define UDCCS0_FST	0x00000008	/* Force STall                     */
+#define UDCCS0_DE	0x00000010	/* Data End                        */
+#define UDCCS0_SE	0x00000020	/* Setup End (read)                */
+#define UDCCS0_SO	0x00000040	/* Serviced Output packet ready    */
+                	        	/* (write)                         */
+#define UDCCS0_SSE	0x00000080	/* Serviced Setup End (write)      */
+
+#define UDCCS1_RFS	0x00000001	/* Receive FIFO 12-bytes or more   */
+                	        	/* Service request (read)          */
+#define UDCCS1_RPC	0x00000002	/* Receive Packet Complete         */
+#define UDCCS1_RPE	0x00000004	/* Receive Packet Error (read)     */
+#define UDCCS1_SST	0x00000008	/* Sent STall                      */
+#define UDCCS1_FST	0x00000010	/* Force STall                     */
+#define UDCCS1_RNE	0x00000020	/* Receive FIFO Not Empty (read)   */
+
+#define UDCCS2_TFS	0x00000001	/* Transmit FIFO 8-bytes or less   */
+                	        	/* Service request (read)          */
+#define UDCCS2_TPC	0x00000002	/* Transmit Packet Complete        */
+#define UDCCS2_TPE	0x00000004	/* Transmit Packet Error (read)    */
+#define UDCCS2_TUR	0x00000008	/* Transmit FIFO Under-Run         */
+#define UDCCS2_SST	0x00000010	/* Sent STall                      */
+#define UDCCS2_FST	0x00000020	/* Force STall                     */
+
+#define UDCD0_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+
+#define UDCWC_WC	Fld (4, 0)	/* Write Count                     */
+
+#define UDCDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+
+#define UDCSR_EIR	0x00000001	/* End-point 0 Interrupt Request   */
+#define UDCSR_RIR	0x00000002	/* Receive Interrupt Request       */
+#define UDCSR_TIR	0x00000004	/* Transmit Interrupt Request      */
+#define UDCSR_SUSIR	0x00000008	/* SUSpend Interrupt Request       */
+#define UDCSR_RESIR	0x00000010	/* RESume Interrupt Request        */
+#define UDCSR_RSTIR	0x00000020	/* ReSeT Interrupt Request         */
+
+
+/*
+ * Universal Asynchronous Receiver/Transmitter (UART) control registers
+ *
+ * Registers
+ *    Ser1UTCR0 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser1UTCR1 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser1UTCR2 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser1UTCR3 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser1UTDR  	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser1UTSR0 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser1UTSR1 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ *    Ser2UTCR0 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser2UTCR1 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser2UTCR2 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser2UTCR3 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser2UTCR4 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 4
+ *              	(read/write).
+ *    Ser2UTDR  	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser2UTSR0 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser2UTSR1 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ *    Ser3UTCR0 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser3UTCR1 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser3UTCR2 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser3UTCR3 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser3UTDR  	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser3UTSR0 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser3UTSR1 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fua, Tua  	Frequency, period of the UART communication.
+ */
+
+#define _UTCR0(Nb)	__REG(0x80010000 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 0 [1..3] */
+#define _UTCR1(Nb)	__REG(0x80010004 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 1 [1..3] */
+#define _UTCR2(Nb)	__REG(0x80010008 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 2 [1..3] */
+#define _UTCR3(Nb)	__REG(0x8001000C + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 3 [1..3] */
+#define _UTCR4(Nb)	__REG(0x80010010 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 4 [2] */
+#define _UTDR(Nb)	__REG(0x80010014 + ((Nb) - 1)*0x00020000)  /* UART Data Reg. [1..3] */
+#define _UTSR0(Nb)	__REG(0x8001001C + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 0 [1..3] */
+#define _UTSR1(Nb)	__REG(0x80010020 + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 1 [1..3] */
+
+#define Ser1UTCR0	_UTCR0 (1)	/* Ser. port 1 UART Control Reg. 0 */
+#define Ser1UTCR1	_UTCR1 (1)	/* Ser. port 1 UART Control Reg. 1 */
+#define Ser1UTCR2	_UTCR2 (1)	/* Ser. port 1 UART Control Reg. 2 */
+#define Ser1UTCR3	_UTCR3 (1)	/* Ser. port 1 UART Control Reg. 3 */
+#define Ser1UTDR	_UTDR (1)	/* Ser. port 1 UART Data Reg.      */
+#define Ser1UTSR0	_UTSR0 (1)	/* Ser. port 1 UART Status Reg. 0  */
+#define Ser1UTSR1	_UTSR1 (1)	/* Ser. port 1 UART Status Reg. 1  */
+
+#define Ser2UTCR0	_UTCR0 (2)	/* Ser. port 2 UART Control Reg. 0 */
+#define Ser2UTCR1	_UTCR1 (2)	/* Ser. port 2 UART Control Reg. 1 */
+#define Ser2UTCR2	_UTCR2 (2)	/* Ser. port 2 UART Control Reg. 2 */
+#define Ser2UTCR3	_UTCR3 (2)	/* Ser. port 2 UART Control Reg. 3 */
+#define Ser2UTCR4	_UTCR4 (2)	/* Ser. port 2 UART Control Reg. 4 */
+#define Ser2UTDR	_UTDR (2)	/* Ser. port 2 UART Data Reg.      */
+#define Ser2UTSR0	_UTSR0 (2)	/* Ser. port 2 UART Status Reg. 0  */
+#define Ser2UTSR1	_UTSR1 (2)	/* Ser. port 2 UART Status Reg. 1  */
+
+#define Ser3UTCR0	_UTCR0 (3)	/* Ser. port 3 UART Control Reg. 0 */
+#define Ser3UTCR1	_UTCR1 (3)	/* Ser. port 3 UART Control Reg. 1 */
+#define Ser3UTCR2	_UTCR2 (3)	/* Ser. port 3 UART Control Reg. 2 */
+#define Ser3UTCR3	_UTCR3 (3)	/* Ser. port 3 UART Control Reg. 3 */
+#define Ser3UTDR	_UTDR (3)	/* Ser. port 3 UART Data Reg.      */
+#define Ser3UTSR0	_UTSR0 (3)	/* Ser. port 3 UART Status Reg. 0  */
+#define Ser3UTSR1	_UTSR1 (3)	/* Ser. port 3 UART Status Reg. 1  */
+
+/* Those are still used in some places */
+#define _Ser1UTCR0	__PREG(Ser1UTCR0)
+#define _Ser2UTCR0	__PREG(Ser2UTCR0)
+#define _Ser3UTCR0	__PREG(Ser3UTCR0)
+
+/* Register offsets */
+#define UTCR0		0x00
+#define UTCR1		0x04
+#define UTCR2		0x08
+#define UTCR3		0x0c
+#define UTDR		0x14
+#define UTSR0		0x1c
+#define UTSR1		0x20
+
+#define UTCR0_PE	0x00000001	/* Parity Enable                   */
+#define UTCR0_OES	0x00000002	/* Odd/Even parity Select          */
+#define UTCR0_OddPar	(UTCR0_OES*0)	/*  Odd Parity                     */
+#define UTCR0_EvenPar	(UTCR0_OES*1)	/*  Even Parity                    */
+#define UTCR0_SBS	0x00000004	/* Stop Bit Select                 */
+#define UTCR0_1StpBit	(UTCR0_SBS*0)	/*  1 Stop Bit per frame           */
+#define UTCR0_2StpBit	(UTCR0_SBS*1)	/*  2 Stop Bits per frame          */
+#define UTCR0_DSS	0x00000008	/* Data Size Select                */
+#define UTCR0_7BitData	(UTCR0_DSS*0)	/*  7-Bit Data                     */
+#define UTCR0_8BitData	(UTCR0_DSS*1)	/*  8-Bit Data                     */
+#define UTCR0_SCE	0x00000010	/* Sample Clock Enable             */
+                	        	/* (ser. port 1: GPIO [18],        */
+                	        	/* ser. port 3: GPIO [20])         */
+#define UTCR0_RCE	0x00000020	/* Receive Clock Edge select       */
+#define UTCR0_RcRsEdg	(UTCR0_RCE*0)	/*  Receive clock Rising-Edge      */
+#define UTCR0_RcFlEdg	(UTCR0_RCE*1)	/*  Receive clock Falling-Edge     */
+#define UTCR0_TCE	0x00000040	/* Transmit Clock Edge select      */
+#define UTCR0_TrRsEdg	(UTCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
+#define UTCR0_TrFlEdg	(UTCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
+#define UTCR0_Ser2IrDA	        	/* Ser. port 2 IrDA settings       */ \
+                	(UTCR0_1StpBit + UTCR0_8BitData)
+
+#define UTCR1_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
+#define UTCR2_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
+                	        	/* fua = fxtl/(16*(BRD[11:0] + 1)) */
+                	        	/* Tua = 16*(BRD [11:0] + 1)*Txtl  */
+#define UTCR1_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
+                	 FShft (UTCR1_BRD))
+#define UTCR2_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
+                	 FShft (UTCR2_BRD))
+                	        	/*  fua = fxtl/(16*Floor (Div/16)) */
+                	        	/*  Tua = 16*Floor (Div/16)*Txtl   */
+#define UTCR1_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
+                	 FShft (UTCR1_BRD))
+#define UTCR2_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
+                	 FShft (UTCR2_BRD))
+                	        	/*  fua = fxtl/(16*Ceil (Div/16))  */
+                	        	/*  Tua = 16*Ceil (Div/16)*Txtl    */
+
+#define UTCR3_RXE	0x00000001	/* Receive Enable                  */
+#define UTCR3_TXE	0x00000002	/* Transmit Enable                 */
+#define UTCR3_BRK	0x00000004	/* BReaK mode                      */
+#define UTCR3_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Interrupt Enable           */
+#define UTCR3_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define UTCR3_LBM	0x00000020	/* Look-Back Mode                  */
+#define UTCR3_Ser2IrDA	        	/* Ser. port 2 IrDA settings (RIE, */ \
+                	        	/* TIE, LBM can be set or cleared) */ \
+                	(UTCR3_RXE + UTCR3_TXE)
+
+#define UTCR4_HSE	0x00000001	/* Hewlett-Packard Serial InfraRed */
+                	        	/* (HP-SIR) modulation Enable      */
+#define UTCR4_NRZ	(UTCR4_HSE*0)	/*  Non-Return to Zero modulation  */
+#define UTCR4_HPSIR	(UTCR4_HSE*1)	/*  HP-SIR modulation              */
+#define UTCR4_LPM	0x00000002	/* Low-Power Mode                  */
+#define UTCR4_Z3_16Bit	(UTCR4_LPM*0)	/*  Zero pulse = 3/16 Bit time     */
+#define UTCR4_Z1_6us	(UTCR4_LPM*1)	/*  Zero pulse = 1.6 us            */
+
+#define UTDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define UTDR_PRE	0x00000100	/*  receive PaRity Error (read)    */
+#define UTDR_FRE	0x00000200	/*  receive FRaming Error (read)   */
+#define UTDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define UTSR0_TFS	0x00000001	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define UTSR0_RFS	0x00000002	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Service request (read)     */
+#define UTSR0_RID	0x00000004	/* Receiver IDle                   */
+#define UTSR0_RBB	0x00000008	/* Receive Beginning of Break      */
+#define UTSR0_REB	0x00000010	/* Receive End of Break            */
+#define UTSR0_EIF	0x00000020	/* Error In FIFO (read)            */
+
+#define UTSR1_TBY	0x00000001	/* Transmitter BusY (read)         */
+#define UTSR1_RNE	0x00000002	/* Receive FIFO Not Empty (read)   */
+#define UTSR1_TNF	0x00000004	/* Transmit FIFO Not Full (read)   */
+#define UTSR1_PRE	0x00000008	/* receive PaRity Error (read)     */
+#define UTSR1_FRE	0x00000010	/* receive FRaming Error (read)    */
+#define UTSR1_ROR	0x00000020	/* Receive FIFO Over-Run (read)    */
+
+
+/*
+ * Synchronous Data Link Controller (SDLC) control registers
+ *
+ * Registers
+ *    Ser1SDCR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 0 (read/write).
+ *    Ser1SDCR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 1 (read/write).
+ *    Ser1SDCR2 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 2 (read/write).
+ *    Ser1SDCR3 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 3 (read/write).
+ *    Ser1SDCR4 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 4 (read/write).
+ *    Ser1SDDR  	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Data Register (read/write).
+ *    Ser1SDSR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Status Register 0 (read/write).
+ *    Ser1SDSR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Status Register 1 (read/write).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fsd, Tsd  	Frequency, period of the SDLC communication.
+ */
+
+#define Ser1SDCR0	__REG(0x80020060)  /* Ser. port 1 SDLC Control Reg. 0 */
+#define Ser1SDCR1	__REG(0x80020064)  /* Ser. port 1 SDLC Control Reg. 1 */
+#define Ser1SDCR2	__REG(0x80020068)  /* Ser. port 1 SDLC Control Reg. 2 */
+#define Ser1SDCR3	__REG(0x8002006C)  /* Ser. port 1 SDLC Control Reg. 3 */
+#define Ser1SDCR4	__REG(0x80020070)  /* Ser. port 1 SDLC Control Reg. 4 */
+#define Ser1SDDR	__REG(0x80020078)  /* Ser. port 1 SDLC Data Reg.      */
+#define Ser1SDSR0	__REG(0x80020080)  /* Ser. port 1 SDLC Status Reg. 0  */
+#define Ser1SDSR1	__REG(0x80020084)  /* Ser. port 1 SDLC Status Reg. 1  */
+
+#define SDCR0_SUS	0x00000001	/* SDLC/UART Select                */
+#define SDCR0_SDLC	(SDCR0_SUS*0)	/*  SDLC mode (TXD1 & RXD1)        */
+#define SDCR0_UART	(SDCR0_SUS*1)	/*  UART mode (TXD1 & RXD1)        */
+#define SDCR0_SDF	0x00000002	/* Single/Double start Flag select */
+#define SDCR0_SglFlg	(SDCR0_SDF*0)	/*  Single start Flag              */
+#define SDCR0_DblFlg	(SDCR0_SDF*1)	/*  Double start Flag              */
+#define SDCR0_LBM	0x00000004	/* Look-Back Mode                  */
+#define SDCR0_BMS	0x00000008	/* Bit Modulation Select           */
+#define SDCR0_FM0	(SDCR0_BMS*0)	/*  Freq. Modulation zero (0)      */
+#define SDCR0_NRZ	(SDCR0_BMS*1)	/*  Non-Return to Zero modulation  */
+#define SDCR0_SCE	0x00000010	/* Sample Clock Enable (GPIO [16]) */
+#define SDCR0_SCD	0x00000020	/* Sample Clock Direction select   */
+                	        	/* (GPIO [16])                     */
+#define SDCR0_SClkIn	(SDCR0_SCD*0)	/*  Sample Clock Input             */
+#define SDCR0_SClkOut	(SDCR0_SCD*1)	/*  Sample Clock Output            */
+#define SDCR0_RCE	0x00000040	/* Receive Clock Edge select       */
+#define SDCR0_RcRsEdg	(SDCR0_RCE*0)	/*  Receive clock Rising-Edge      */
+#define SDCR0_RcFlEdg	(SDCR0_RCE*1)	/*  Receive clock Falling-Edge     */
+#define SDCR0_TCE	0x00000080	/* Transmit Clock Edge select      */
+#define SDCR0_TrRsEdg	(SDCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
+#define SDCR0_TrFlEdg	(SDCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
+
+#define SDCR1_AAF	0x00000001	/* Abort After Frame enable        */
+                	        	/* (GPIO [17])                     */
+#define SDCR1_TXE	0x00000002	/* Transmit Enable                 */
+#define SDCR1_RXE	0x00000004	/* Receive Enable                  */
+#define SDCR1_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Interrupt Enable           */
+#define SDCR1_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define SDCR1_AME	0x00000020	/* Address Match Enable            */
+#define SDCR1_TUS	0x00000040	/* Transmit FIFO Under-run Select  */
+#define SDCR1_EFrmURn	(SDCR1_TUS*0)	/*  End Frame on Under-Run         */
+#define SDCR1_AbortURn	(SDCR1_TUS*1)	/*  Abort on Under-Run             */
+#define SDCR1_RAE	0x00000080	/* Receive Abort interrupt Enable  */
+
+#define SDCR2_AMV	Fld (8, 0)	/* Address Match Value             */
+
+#define SDCR3_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
+#define SDCR4_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
+                	        	/* fsd = fxtl/(16*(BRD[11:0] + 1)) */
+                	        	/* Tsd = 16*(BRD[11:0] + 1)*Txtl   */
+#define SDCR3_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
+                	 FShft (SDCR3_BRD))
+#define SDCR4_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
+                	 FShft (SDCR4_BRD))
+                	        	/*  fsd = fxtl/(16*Floor (Div/16)) */
+                	        	/*  Tsd = 16*Floor (Div/16)*Txtl   */
+#define SDCR3_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
+                	 FShft (SDCR3_BRD))
+#define SDCR4_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
+                	 FShft (SDCR4_BRD))
+                	        	/*  fsd = fxtl/(16*Ceil (Div/16))  */
+                	        	/*  Tsd = 16*Ceil (Div/16)*Txtl    */
+
+#define SDDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define SDDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
+#define SDDR_CRE	0x00000200	/*  receive CRC Error (read)       */
+#define SDDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define SDSR0_EIF	0x00000001	/* Error In FIFO (read)            */
+#define SDSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
+#define SDSR0_RAB	0x00000004	/* Receive ABort                   */
+#define SDSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define SDSR0_RFS	0x00000010	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Service request (read)     */
+
+#define SDSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
+#define SDSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
+#define SDSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define SDSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
+#define SDSR1_RTD	0x00000010	/* Receive Transition Detected     */
+#define SDSR1_EOF	0x00000020	/* receive End-Of-Frame (read)     */
+#define SDSR1_CRE	0x00000040	/* receive CRC Error (read)        */
+#define SDSR1_ROR	0x00000080	/* Receive FIFO Over-Run (read)    */
+
+
+/*
+ * High-Speed Serial to Parallel controller (HSSP) control registers
+ *
+ * Registers
+ *    Ser2HSCR0 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 0 (read/write).
+ *    Ser2HSCR1 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 1 (read/write).
+ *    Ser2HSDR  	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Data Register (read/write).
+ *    Ser2HSSR0 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Status Register 0 (read/write).
+ *    Ser2HSSR1 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Status Register 1 (read).
+ *    Ser2HSCR2 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 2 (read/write).
+ *              	[The HSCR2 register is only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ */
+
+#define Ser2HSCR0	__REG(0x80040060)  /* Ser. port 2 HSSP Control Reg. 0 */
+#define Ser2HSCR1	__REG(0x80040064)  /* Ser. port 2 HSSP Control Reg. 1 */
+#define Ser2HSDR	__REG(0x8004006C)  /* Ser. port 2 HSSP Data Reg.      */
+#define Ser2HSSR0	__REG(0x80040074)  /* Ser. port 2 HSSP Status Reg. 0  */
+#define Ser2HSSR1	__REG(0x80040078)  /* Ser. port 2 HSSP Status Reg. 1  */
+#define Ser2HSCR2	__REG(0x90060028)  /* Ser. port 2 HSSP Control Reg. 2 */
+
+#define HSCR0_ITR	0x00000001	/* IrDA Transmission Rate          */
+#define HSCR0_UART	(HSCR0_ITR*0)	/*  UART mode (115.2 kb/s if IrDA) */
+#define HSCR0_HSSP	(HSCR0_ITR*1)	/*  HSSP mode (4 Mb/s)             */
+#define HSCR0_LBM	0x00000002	/* Look-Back Mode                  */
+#define HSCR0_TUS	0x00000004	/* Transmit FIFO Under-run Select  */
+#define HSCR0_EFrmURn	(HSCR0_TUS*0)	/*  End Frame on Under-Run         */
+#define HSCR0_AbortURn	(HSCR0_TUS*1)	/*  Abort on Under-Run             */
+#define HSCR0_TXE	0x00000008	/* Transmit Enable                 */
+#define HSCR0_RXE	0x00000010	/* Receive Enable                  */
+#define HSCR0_RIE	0x00000020	/* Receive FIFO 2/5-to-3/5-full or */
+                	        	/* more Interrupt Enable           */
+#define HSCR0_TIE	0x00000040	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define HSCR0_AME	0x00000080	/* Address Match Enable            */
+
+#define HSCR1_AMV	Fld (8, 0)	/* Address Match Value             */
+
+#define HSDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define HSDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
+#define HSDR_CRE	0x00000200	/*  receive CRC Error (read)       */
+#define HSDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define HSSR0_EIF	0x00000001	/* Error In FIFO (read)            */
+#define HSSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
+#define HSSR0_RAB	0x00000004	/* Receive ABort                   */
+#define HSSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define HSSR0_RFS	0x00000010	/* Receive FIFO 2/5-to-3/5-full or */
+                	        	/* more Service request (read)     */
+#define HSSR0_FRE	0x00000020	/* receive FRaming Error           */
+
+#define HSSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
+#define HSSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
+#define HSSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define HSSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
+#define HSSR1_EOF	0x00000010	/* receive End-Of-Frame (read)     */
+#define HSSR1_CRE	0x00000020	/* receive CRC Error (read)        */
+#define HSSR1_ROR	0x00000040	/* Receive FIFO Over-Run (read)    */
+
+#define HSCR2_TXP	0x00040000	/* Transmit data Polarity (TXD_2)  */
+#define HSCR2_TrDataL	(HSCR2_TXP*0)	/*  Transmit Data active Low       */
+                	        	/*  (inverted)                     */
+#define HSCR2_TrDataH	(HSCR2_TXP*1)	/*  Transmit Data active High      */
+                	        	/*  (non-inverted)                 */
+#define HSCR2_RXP	0x00080000	/* Receive data Polarity (RXD_2)   */
+#define HSCR2_RcDataL	(HSCR2_RXP*0)	/*  Receive Data active Low        */
+                	        	/*  (inverted)                     */
+#define HSCR2_RcDataH	(HSCR2_RXP*1)	/*  Receive Data active High       */
+                	        	/*  (non-inverted)                 */
+
+
+/*
+ * Multi-media Communications Port (MCP) control registers
+ *
+ * Registers
+ *    Ser4MCCR0 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Control Register 0 (read/write).
+ *    Ser4MCDR0 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 0 (audio, read/write).
+ *    Ser4MCDR1 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 1 (telecom, read/write).
+ *    Ser4MCDR2 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 2 (CODEC registers, read/write).
+ *    Ser4MCSR  	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Status Register (read/write).
+ *    Ser4MCCR1 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Control Register 1 (read/write).
+ *              	[The MCCR1 register is only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ *
+ * Clocks
+ *    fmc, Tmc  	Frequency, period of the MCP communication (10 MHz,
+ *              	12 MHz, or GPIO [21]).
+ *    faud, Taud	Frequency, period of the audio sampling.
+ *    ftcm, Ttcm	Frequency, period of the telecom sampling.
+ */
+
+#define Ser4MCCR0	__REG(0x80060000)  /* Ser. port 4 MCP Control Reg. 0 */
+#define Ser4MCDR0	__REG(0x80060008)  /* Ser. port 4 MCP Data Reg. 0 (audio) */
+#define Ser4MCDR1	__REG(0x8006000C)  /* Ser. port 4 MCP Data Reg. 1 (telecom) */
+#define Ser4MCDR2	__REG(0x80060010)  /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */
+#define Ser4MCSR	__REG(0x80060018)  /* Ser. port 4 MCP Status Reg. */
+#define Ser4MCCR1	__REG(0x90060030)  /* Ser. port 4 MCP Control Reg. 1 */
+
+#define MCCR0_ASD	Fld (7, 0)	/* Audio Sampling rate Divisor/32  */
+                	        	/* [6..127]                        */
+                	        	/* faud = fmc/(32*ASD)             */
+                	        	/* Taud = 32*ASD*Tmc               */
+#define MCCR0_AudSmpDiv(Div)    	/*  Audio Sampling rate Divisor    */ \
+                	        	/*  [192..4064]                    */ \
+                	((Div)/32 << FShft (MCCR0_ASD))
+                	        	/*  faud = fmc/(32*Floor (Div/32)) */
+                	        	/*  Taud = 32*Floor (Div/32)*Tmc   */
+#define MCCR0_CeilAudSmpDiv(Div)	/*  Ceil. of AudSmpDiv [192..4064] */ \
+                	(((Div) + 31)/32 << FShft (MCCR0_ASD))
+                	        	/*  faud = fmc/(32*Ceil (Div/32))  */
+                	        	/*  Taud = 32*Ceil (Div/32)*Tmc    */
+#define MCCR0_TSD	Fld (7, 8)	/* Telecom Sampling rate           */
+                	        	/* Divisor/32 [16..127]            */
+                	        	/* ftcm = fmc/(32*TSD)             */
+                	        	/* Ttcm = 32*TSD*Tmc               */
+#define MCCR0_TcmSmpDiv(Div)    	/*  Telecom Sampling rate Divisor  */ \
+                	        	/*  [512..4064]                    */ \
+                	((Div)/32 << FShft (MCCR0_TSD))
+                	        	/*  ftcm = fmc/(32*Floor (Div/32)) */
+                	        	/*  Ttcm = 32*Floor (Div/32)*Tmc   */
+#define MCCR0_CeilTcmSmpDiv(Div)	/*  Ceil. of TcmSmpDiv [512..4064] */ \
+                	(((Div) + 31)/32 << FShft (MCCR0_TSD))
+                	        	/*  ftcm = fmc/(32*Ceil (Div/32))  */
+                	        	/*  Ttcm = 32*Ceil (Div/32)*Tmc    */
+#define MCCR0_MCE	0x00010000	/* MCP Enable                      */
+#define MCCR0_ECS	0x00020000	/* External Clock Select           */
+#define MCCR0_IntClk	(MCCR0_ECS*0)	/*  Internal Clock (10 or 12 MHz)  */
+#define MCCR0_ExtClk	(MCCR0_ECS*1)	/*  External Clock (GPIO [21])     */
+#define MCCR0_ADM	0x00040000	/* A/D (audio/telecom) data        */
+                	        	/* sampling/storing Mode           */
+#define MCCR0_VldBit	(MCCR0_ADM*0)	/*  Valid Bit storing mode         */
+#define MCCR0_SmpCnt	(MCCR0_ADM*1)	/*  Sampling Counter storing mode  */
+#define MCCR0_TTE	0x00080000	/* Telecom Transmit FIFO 1/2-full  */
+                	        	/* or less interrupt Enable        */
+#define MCCR0_TRE	0x00100000	/* Telecom Receive FIFO 1/2-full   */
+                	        	/* or more interrupt Enable        */
+#define MCCR0_ATE	0x00200000	/* Audio Transmit FIFO 1/2-full    */
+                	        	/* or less interrupt Enable        */
+#define MCCR0_ARE	0x00400000	/* Audio Receive FIFO 1/2-full or  */
+                	        	/* more interrupt Enable           */
+#define MCCR0_LBM	0x00800000	/* Look-Back Mode                  */
+#define MCCR0_ECP	Fld (2, 24)	/* External Clock Prescaler - 1    */
+#define MCCR0_ExtClkDiv(Div)    	/*  External Clock Divisor [1..4]  */ \
+                	(((Div) - 1) << FShft (MCCR0_ECP))
+
+#define MCDR0_DATA	Fld (12, 4)	/* receive/transmit audio DATA     */
+                	        	/* FIFOs                           */
+
+#define MCDR1_DATA	Fld (14, 2)	/* receive/transmit telecom DATA   */
+                	        	/* FIFOs                           */
+
+                	        	/* receive/transmit CODEC reg.     */
+                	        	/* FIFOs:                          */
+#define MCDR2_DATA	Fld (16, 0)	/*  reg. DATA                      */
+#define MCDR2_RW	0x00010000	/*  reg. Read/Write (transmit)     */
+#define MCDR2_Rd	(MCDR2_RW*0)	/*   reg. Read                     */
+#define MCDR2_Wr	(MCDR2_RW*1)	/*   reg. Write                    */
+#define MCDR2_ADD	Fld (4, 17)	/*  reg. ADDress                   */
+
+#define MCSR_ATS	0x00000001	/* Audio Transmit FIFO 1/2-full    */
+                	        	/* or less Service request (read)  */
+#define MCSR_ARS	0x00000002	/* Audio Receive FIFO 1/2-full or  */
+                	        	/* more Service request (read)     */
+#define MCSR_TTS	0x00000004	/* Telecom Transmit FIFO 1/2-full  */
+                	        	/* or less Service request (read)  */
+#define MCSR_TRS	0x00000008	/* Telecom Receive FIFO 1/2-full   */
+                	        	/* or more Service request (read)  */
+#define MCSR_ATU	0x00000010	/* Audio Transmit FIFO Under-run   */
+#define MCSR_ARO	0x00000020	/* Audio Receive FIFO Over-run     */
+#define MCSR_TTU	0x00000040	/* Telecom Transmit FIFO Under-run */
+#define MCSR_TRO	0x00000080	/* Telecom Receive FIFO Over-run   */
+#define MCSR_ANF	0x00000100	/* Audio transmit FIFO Not Full    */
+                	        	/* (read)                          */
+#define MCSR_ANE	0x00000200	/* Audio receive FIFO Not Empty    */
+                	        	/* (read)                          */
+#define MCSR_TNF	0x00000400	/* Telecom transmit FIFO Not Full  */
+                	        	/* (read)                          */
+#define MCSR_TNE	0x00000800	/* Telecom receive FIFO Not Empty  */
+                	        	/* (read)                          */
+#define MCSR_CWC	0x00001000	/* CODEC register Write Completed  */
+                	        	/* (read)                          */
+#define MCSR_CRC	0x00002000	/* CODEC register Read Completed   */
+                	        	/* (read)                          */
+#define MCSR_ACE	0x00004000	/* Audio CODEC Enabled (read)      */
+#define MCSR_TCE	0x00008000	/* Telecom CODEC Enabled (read)    */
+
+#define MCCR1_CFS	0x00100000	/* Clock Freq. Select              */
+#define MCCR1_F12MHz	(MCCR1_CFS*0)	/*  Freq. (fmc) = ~ 12 MHz         */
+                	        	/*  (11.981 MHz)                   */
+#define MCCR1_F10MHz	(MCCR1_CFS*1)	/*  Freq. (fmc) = ~ 10 MHz         */
+                	        	/*  (9.585 MHz)                    */
+
+
+/*
+ * Synchronous Serial Port (SSP) control registers
+ *
+ * Registers
+ *    Ser4SSCR0 	Serial port 4 Synchronous Serial Port (SSP) Control
+ *              	Register 0 (read/write).
+ *    Ser4SSCR1 	Serial port 4 Synchronous Serial Port (SSP) Control
+ *              	Register 1 (read/write).
+ *              	[Bits SPO and SP are only implemented in versions 2.0
+ *              	(rev. = 8) and higher of the StrongARM SA-1100.]
+ *    Ser4SSDR  	Serial port 4 Synchronous Serial Port (SSP) Data
+ *              	Register (read/write).
+ *    Ser4SSSR  	Serial port 4 Synchronous Serial Port (SSP) Status
+ *              	Register (read/write).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fss, Tss  	Frequency, period of the SSP communication.
+ */
+
+#define Ser4SSCR0	__REG(0x80070060)  /* Ser. port 4 SSP Control Reg. 0 */
+#define Ser4SSCR1	__REG(0x80070064)  /* Ser. port 4 SSP Control Reg. 1 */
+#define Ser4SSDR	__REG(0x8007006C)  /* Ser. port 4 SSP Data Reg. */
+#define Ser4SSSR	__REG(0x80070074)  /* Ser. port 4 SSP Status Reg. */
+
+#define SSCR0_DSS	Fld (4, 0)	/* Data Size - 1 Select [3..15]    */
+#define SSCR0_DataSize(Size)    	/*  Data Size Select [4..16]       */ \
+                	(((Size) - 1) << FShft (SSCR0_DSS))
+#define SSCR0_FRF	Fld (2, 4)	/* FRame Format                    */
+#define SSCR0_Motorola	        	/*  Motorola Serial Peripheral     */ \
+                	        	/*  Interface (SPI) format         */ \
+                	(0 << FShft (SSCR0_FRF))
+#define SSCR0_TI	        	/*  Texas Instruments Synchronous  */ \
+                	        	/*  Serial format                  */ \
+                	(1 << FShft (SSCR0_FRF))
+#define SSCR0_National	        	/*  National Microwire format      */ \
+                	(2 << FShft (SSCR0_FRF))
+#define SSCR0_SSE	0x00000080	/* SSP Enable                      */
+#define SSCR0_SCR	Fld (8, 8)	/* Serial Clock Rate divisor/2 - 1 */
+                	        	/* fss = fxtl/(2*(SCR + 1))        */
+                	        	/* Tss = 2*(SCR + 1)*Txtl          */
+#define SSCR0_SerClkDiv(Div)    	/*  Serial Clock Divisor [2..512]  */ \
+                	(((Div) - 2)/2 << FShft (SSCR0_SCR))
+                	        	/*  fss = fxtl/(2*Floor (Div/2))   */
+                	        	/*  Tss = 2*Floor (Div/2)*Txtl     */
+#define SSCR0_CeilSerClkDiv(Div)	/*  Ceil. of SerClkDiv [2..512]    */ \
+                	(((Div) - 1)/2 << FShft (SSCR0_SCR))
+                	        	/*  fss = fxtl/(2*Ceil (Div/2))    */
+                	        	/*  Tss = 2*Ceil (Div/2)*Txtl      */
+
+#define SSCR1_RIE	0x00000001	/* Receive FIFO 1/2-full or more   */
+                	        	/* Interrupt Enable                */
+#define SSCR1_TIE	0x00000002	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define SSCR1_LBM	0x00000004	/* Look-Back Mode                  */
+#define SSCR1_SPO	0x00000008	/* Sample clock (SCLK) POlarity    */
+#define SSCR1_SClkIactL	(SSCR1_SPO*0)	/*  Sample Clock Inactive Low      */
+#define SSCR1_SClkIactH	(SSCR1_SPO*1)	/*  Sample Clock Inactive High     */
+#define SSCR1_SP	0x00000010	/* Sample clock (SCLK) Phase       */
+#define SSCR1_SClk1P	(SSCR1_SP*0)	/*  Sample Clock active 1 Period   */
+                	        	/*  after frame (SFRM, 1st edge)   */
+#define SSCR1_SClk1_2P	(SSCR1_SP*1)	/*  Sample Clock active 1/2 Period */
+                	        	/*  after frame (SFRM, 1st edge)   */
+#define SSCR1_ECS	0x00000020	/* External Clock Select           */
+#define SSCR1_IntClk	(SSCR1_ECS*0)	/*  Internal Clock                 */
+#define SSCR1_ExtClk	(SSCR1_ECS*1)	/*  External Clock (GPIO [19])     */
+
+#define SSDR_DATA	Fld (16, 0)	/* receive/transmit DATA FIFOs     */
+
+#define SSSR_TNF	0x00000002	/* Transmit FIFO Not Full (read)   */
+#define SSSR_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define SSSR_BSY	0x00000008	/* SSP BuSY (read)                 */
+#define SSSR_TFS	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define SSSR_RFS	0x00000020	/* Receive FIFO 1/2-full or more   */
+                	        	/* Service request (read)          */
+#define SSSR_ROR	0x00000040	/* Receive FIFO Over-Run           */
+
+
+/*
+ * Operating System (OS) timer control registers
+ *
+ * Registers
+ *    OSMR0     	Operating System (OS) timer Match Register 0
+ *              	(read/write).
+ *    OSMR1     	Operating System (OS) timer Match Register 1
+ *              	(read/write).
+ *    OSMR2     	Operating System (OS) timer Match Register 2
+ *              	(read/write).
+ *    OSMR3     	Operating System (OS) timer Match Register 3
+ *              	(read/write).
+ *    OSCR      	Operating System (OS) timer Counter Register
+ *              	(read/write).
+ *    OSSR      	Operating System (OS) timer Status Register
+ *              	(read/write).
+ *    OWER      	Operating System (OS) timer Watch-dog Enable Register
+ *              	(read/write).
+ *    OIER      	Operating System (OS) timer Interrupt Enable Register
+ *              	(read/write).
+ */
+
+#define OSMR0  		__REG(0x90000000)  /* OS timer Match Reg. 0 */
+#define OSMR1  		__REG(0x90000004)  /* OS timer Match Reg. 1 */
+#define OSMR2  		__REG(0x90000008)  /* OS timer Match Reg. 2 */
+#define OSMR3  		__REG(0x9000000c)  /* OS timer Match Reg. 3 */
+#define OSCR   	__REG(0x90000010)  /* OS timer Counter Reg. */
+#define OSSR   	__REG(0x90000014	)  /* OS timer Status Reg. */
+#define OWER   	__REG(0x90000018	)  /* OS timer Watch-dog Enable Reg. */
+#define OIER   	__REG(0x9000001C	)  /* OS timer Interrupt Enable Reg. */
+
+#define OSSR_M(Nb)	        	/* Match detected [0..3]           */ \
+                	(0x00000001 << (Nb))
+#define OSSR_M0 	OSSR_M (0)	/* Match detected 0                */
+#define OSSR_M1 	OSSR_M (1)	/* Match detected 1                */
+#define OSSR_M2 	OSSR_M (2)	/* Match detected 2                */
+#define OSSR_M3 	OSSR_M (3)	/* Match detected 3                */
+
+#define OWER_WME	0x00000001	/* Watch-dog Match Enable          */
+                	        	/* (set only)                      */
+
+#define OIER_E(Nb)	        	/* match interrupt Enable [0..3]   */ \
+                	(0x00000001 << (Nb))
+#define OIER_E0 	OIER_E (0)	/* match interrupt Enable 0        */
+#define OIER_E1 	OIER_E (1)	/* match interrupt Enable 1        */
+#define OIER_E2 	OIER_E (2)	/* match interrupt Enable 2        */
+#define OIER_E3 	OIER_E (3)	/* match interrupt Enable 3        */
+
+
+/*
+ * Real-Time Clock (RTC) control registers
+ *
+ * Registers
+ *    RTAR      	Real-Time Clock (RTC) Alarm Register (read/write).
+ *    RCNR      	Real-Time Clock (RTC) CouNt Register (read/write).
+ *    RTTR      	Real-Time Clock (RTC) Trim Register (read/write).
+ *    RTSR      	Real-Time Clock (RTC) Status Register (read/write).
+ *
+ * Clocks
+ *    frtx, Trtx	Frequency, period of the real-time clock crystal
+ *              	(32.768 kHz nominal).
+ *    frtc, Trtc	Frequency, period of the real-time clock counter
+ *              	(1 Hz nominal).
+ */
+
+#define RTAR		__REG(0x90010000)  /* RTC Alarm Reg. */
+#define RCNR		__REG(0x90010004)  /* RTC CouNt Reg. */
+#define RTTR		__REG(0x90010008)  /* RTC Trim Reg. */
+#define RTSR		__REG(0x90010010)  /* RTC Status Reg. */
+
+#define RTTR_C  	Fld (16, 0)	/* clock divider Count - 1         */
+#define RTTR_D  	Fld (10, 16)	/* trim Delete count               */
+                	        	/* frtc = (1023*(C + 1) - D)*frtx/ */
+                	        	/*        (1023*(C + 1)^2)         */
+                	        	/* Trtc = (1023*(C + 1)^2)*Trtx/   */
+                	        	/*        (1023*(C + 1) - D)       */
+
+#define RTSR_AL 	0x00000001	/* ALarm detected                  */
+#define RTSR_HZ 	0x00000002	/* 1 Hz clock detected             */
+#define RTSR_ALE	0x00000004	/* ALarm interrupt Enable          */
+#define RTSR_HZE	0x00000008	/* 1 Hz clock interrupt Enable     */
+
+
+/*
+ * Power Manager (PM) control registers
+ *
+ * Registers
+ *    PMCR      	Power Manager (PM) Control Register (read/write).
+ *    PSSR      	Power Manager (PM) Sleep Status Register (read/write).
+ *    PSPR      	Power Manager (PM) Scratch-Pad Register (read/write).
+ *    PWER      	Power Manager (PM) Wake-up Enable Register
+ *              	(read/write).
+ *    PCFR      	Power Manager (PM) general ConFiguration Register
+ *              	(read/write).
+ *    PPCR      	Power Manager (PM) Phase-Locked Loop (PLL)
+ *              	Configuration Register (read/write).
+ *    PGSR      	Power Manager (PM) General-Purpose Input/Output (GPIO)
+ *              	Sleep state Register (read/write, see GPIO pins).
+ *    POSR      	Power Manager (PM) Oscillator Status Register (read).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define PMCR		__REG(0x90020000)  /* PM Control Reg. */
+#define PSSR		__REG(0x90020004)  /* PM Sleep Status Reg. */
+#define PSPR		__REG(0x90020008)  /* PM Scratch-Pad Reg. */
+#define PWER		__REG(0x9002000C)  /* PM Wake-up Enable Reg. */
+#define PCFR		__REG(0x90020010)  /* PM general ConFiguration Reg. */
+#define PPCR		__REG(0x90020014)  /* PM PLL Configuration Reg. */
+#define PGSR		__REG(0x90020018)  /* PM GPIO Sleep state Reg. */
+#define POSR		__REG(0x9002001C)  /* PM Oscillator Status Reg. */
+
+#define PMCR_SF 	0x00000001	/* Sleep Force (set only)          */
+
+#define PSSR_SS 	0x00000001	/* Software Sleep                  */
+#define PSSR_BFS	0x00000002	/* Battery Fault Status            */
+                	        	/* (BATT_FAULT)                    */
+#define PSSR_VFS	0x00000004	/* Vdd Fault Status (VDD_FAULT)    */
+#define PSSR_DH 	0x00000008	/* DRAM control Hold               */
+#define PSSR_PH 	0x00000010	/* Peripheral control Hold         */
+
+#define PWER_GPIO(Nb)	GPIO_GPIO (Nb)	/* GPIO [0..27] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_GPIO16	PWER_GPIO (16)	/* GPIO [16] wake-up enable        */
+#define PWER_GPIO17	PWER_GPIO (17)	/* GPIO [17] wake-up enable        */
+#define PWER_GPIO18	PWER_GPIO (18)	/* GPIO [18] wake-up enable        */
+#define PWER_GPIO19	PWER_GPIO (19)	/* GPIO [19] wake-up enable        */
+#define PWER_GPIO20	PWER_GPIO (20)	/* GPIO [20] wake-up enable        */
+#define PWER_GPIO21	PWER_GPIO (21)	/* GPIO [21] wake-up enable        */
+#define PWER_GPIO22	PWER_GPIO (22)	/* GPIO [22] wake-up enable        */
+#define PWER_GPIO23	PWER_GPIO (23)	/* GPIO [23] wake-up enable        */
+#define PWER_GPIO24	PWER_GPIO (24)	/* GPIO [24] wake-up enable        */
+#define PWER_GPIO25	PWER_GPIO (25)	/* GPIO [25] wake-up enable        */
+#define PWER_GPIO26	PWER_GPIO (26)	/* GPIO [26] wake-up enable        */
+#define PWER_GPIO27	PWER_GPIO (27)	/* GPIO [27] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+#define PCFR_OPDE	0x00000001	/* Oscillator Power-Down Enable    */
+#define PCFR_ClkRun	(PCFR_OPDE*0)	/*  Clock Running in sleep mode    */
+#define PCFR_ClkStp	(PCFR_OPDE*1)	/*  Clock Stopped in sleep mode    */
+#define PCFR_FP 	0x00000002	/* Float PCMCIA pins               */
+#define PCFR_PCMCIANeg	(PCFR_FP*0)	/*  PCMCIA pins Negated (1)        */
+#define PCFR_PCMCIAFlt	(PCFR_FP*1)	/*  PCMCIA pins Floating           */
+#define PCFR_FS 	0x00000004	/* Float Static memory pins        */
+#define PCFR_StMemNeg	(PCFR_FS*0)	/*  Static Memory pins Negated (1) */
+#define PCFR_StMemFlt	(PCFR_FS*1)	/*  Static Memory pins Floating    */
+#define PCFR_FO 	0x00000008	/* Force RTC oscillator            */
+                	        	/* (32.768 kHz) enable On          */
+
+#define PPCR_CCF	Fld (5, 0)	/* CPU core Clock (CCLK) Freq.     */
+#define PPCR_Fx16	        	/*  Freq. x 16 (fcpu = 16*fxtl)    */ \
+                	(0x00 << FShft (PPCR_CCF))
+#define PPCR_Fx20	        	/*  Freq. x 20 (fcpu = 20*fxtl)    */ \
+                	(0x01 << FShft (PPCR_CCF))
+#define PPCR_Fx24	        	/*  Freq. x 24 (fcpu = 24*fxtl)    */ \
+                	(0x02 << FShft (PPCR_CCF))
+#define PPCR_Fx28	        	/*  Freq. x 28 (fcpu = 28*fxtl)    */ \
+                	(0x03 << FShft (PPCR_CCF))
+#define PPCR_Fx32	        	/*  Freq. x 32 (fcpu = 32*fxtl)    */ \
+                	(0x04 << FShft (PPCR_CCF))
+#define PPCR_Fx36	        	/*  Freq. x 36 (fcpu = 36*fxtl)    */ \
+                	(0x05 << FShft (PPCR_CCF))
+#define PPCR_Fx40	        	/*  Freq. x 40 (fcpu = 40*fxtl)    */ \
+                	(0x06 << FShft (PPCR_CCF))
+#define PPCR_Fx44	        	/*  Freq. x 44 (fcpu = 44*fxtl)    */ \
+                	(0x07 << FShft (PPCR_CCF))
+#define PPCR_Fx48	        	/*  Freq. x 48 (fcpu = 48*fxtl)    */ \
+                	(0x08 << FShft (PPCR_CCF))
+#define PPCR_Fx52	        	/*  Freq. x 52 (fcpu = 52*fxtl)    */ \
+                	(0x09 << FShft (PPCR_CCF))
+#define PPCR_Fx56	        	/*  Freq. x 56 (fcpu = 56*fxtl)    */ \
+                	(0x0A << FShft (PPCR_CCF))
+#define PPCR_Fx60	        	/*  Freq. x 60 (fcpu = 60*fxtl)    */ \
+                	(0x0B << FShft (PPCR_CCF))
+#define PPCR_Fx64	        	/*  Freq. x 64 (fcpu = 64*fxtl)    */ \
+                	(0x0C << FShft (PPCR_CCF))
+#define PPCR_Fx68	        	/*  Freq. x 68 (fcpu = 68*fxtl)    */ \
+                	(0x0D << FShft (PPCR_CCF))
+#define PPCR_Fx72	        	/*  Freq. x 72 (fcpu = 72*fxtl)    */ \
+                	(0x0E << FShft (PPCR_CCF))
+#define PPCR_Fx76	        	/*  Freq. x 76 (fcpu = 76*fxtl)    */ \
+                	(0x0F << FShft (PPCR_CCF))
+                	        	/*  3.6864 MHz crystal (fxtl):     */
+#define PPCR_F59_0MHz	PPCR_Fx16	/*   Freq. (fcpu) =  59.0 MHz      */
+#define PPCR_F73_7MHz	PPCR_Fx20	/*   Freq. (fcpu) =  73.7 MHz      */
+#define PPCR_F88_5MHz	PPCR_Fx24	/*   Freq. (fcpu) =  88.5 MHz      */
+#define PPCR_F103_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 103.2 MHz      */
+#define PPCR_F118_0MHz	PPCR_Fx32	/*   Freq. (fcpu) = 118.0 MHz      */
+#define PPCR_F132_7MHz	PPCR_Fx36	/*   Freq. (fcpu) = 132.7 MHz      */
+#define PPCR_F147_5MHz	PPCR_Fx40	/*   Freq. (fcpu) = 147.5 MHz      */
+#define PPCR_F162_2MHz	PPCR_Fx44	/*   Freq. (fcpu) = 162.2 MHz      */
+#define PPCR_F176_9MHz	PPCR_Fx48	/*   Freq. (fcpu) = 176.9 MHz      */
+#define PPCR_F191_7MHz	PPCR_Fx52	/*   Freq. (fcpu) = 191.7 MHz      */
+#define PPCR_F206_4MHz	PPCR_Fx56	/*   Freq. (fcpu) = 206.4 MHz      */
+#define PPCR_F221_2MHz	PPCR_Fx60	/*   Freq. (fcpu) = 221.2 MHz      */
+#define PPCR_F239_6MHz	PPCR_Fx64	/*   Freq. (fcpu) = 239.6 MHz      */
+#define PPCR_F250_7MHz	PPCR_Fx68	/*   Freq. (fcpu) = 250.7 MHz      */
+#define PPCR_F265_4MHz	PPCR_Fx72	/*   Freq. (fcpu) = 265.4 MHz      */
+#define PPCR_F280_2MHz	PPCR_Fx76	/*   Freq. (fcpu) = 280.2 MHz      */
+                	        	/*  3.5795 MHz crystal (fxtl):     */
+#define PPCR_F57_3MHz	PPCR_Fx16	/*   Freq. (fcpu) =  57.3 MHz      */
+#define PPCR_F71_6MHz	PPCR_Fx20	/*   Freq. (fcpu) =  71.6 MHz      */
+#define PPCR_F85_9MHz	PPCR_Fx24	/*   Freq. (fcpu) =  85.9 MHz      */
+#define PPCR_F100_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 100.2 MHz      */
+#define PPCR_F114_5MHz	PPCR_Fx32	/*   Freq. (fcpu) = 114.5 MHz      */
+#define PPCR_F128_9MHz	PPCR_Fx36	/*   Freq. (fcpu) = 128.9 MHz      */
+#define PPCR_F143_2MHz	PPCR_Fx40	/*   Freq. (fcpu) = 143.2 MHz      */
+#define PPCR_F157_5MHz	PPCR_Fx44	/*   Freq. (fcpu) = 157.5 MHz      */
+#define PPCR_F171_8MHz	PPCR_Fx48	/*   Freq. (fcpu) = 171.8 MHz      */
+#define PPCR_F186_1MHz	PPCR_Fx52	/*   Freq. (fcpu) = 186.1 MHz      */
+#define PPCR_F200_5MHz	PPCR_Fx56	/*   Freq. (fcpu) = 200.5 MHz      */
+#define PPCR_F214_8MHz	PPCR_Fx60	/*   Freq. (fcpu) = 214.8 MHz      */
+#define PPCR_F229_1MHz	PPCR_Fx64	/*   Freq. (fcpu) = 229.1 MHz      */
+#define PPCR_F243_4MHz	PPCR_Fx68	/*   Freq. (fcpu) = 243.4 MHz      */
+#define PPCR_F257_7MHz	PPCR_Fx72	/*   Freq. (fcpu) = 257.7 MHz      */
+#define PPCR_F272_0MHz	PPCR_Fx76	/*   Freq. (fcpu) = 272.0 MHz      */
+
+#define POSR_OOK	0x00000001	/* RTC Oscillator (32.768 kHz) OK  */
+
+
+/*
+ * Reset Controller (RC) control registers
+ *
+ * Registers
+ *    RSRR      	Reset Controller (RC) Software Reset Register
+ *              	(read/write).
+ *    RCSR      	Reset Controller (RC) Status Register (read/write).
+ */
+
+#define RSRR		__REG(0x90030000)  /* RC Software Reset Reg. */
+#define RCSR		__REG(0x90030004)  /* RC Status Reg. */
+
+#define RSRR_SWR	0x00000001	/* SoftWare Reset (set only)       */
+
+#define RCSR_HWR	0x00000001	/* HardWare Reset                  */
+#define RCSR_SWR	0x00000002	/* SoftWare Reset                  */
+#define RCSR_WDR	0x00000004	/* Watch-Dog Reset                 */
+#define RCSR_SMR	0x00000008	/* Sleep-Mode Reset                */
+
+
+/*
+ * Test unit control registers
+ *
+ * Registers
+ *    TUCR      	Test Unit Control Register (read/write).
+ */
+
+#define TUCR		__REG(0x90030008)  /* Test Unit Control Reg. */
+
+#define TUCR_TIC	0x00000040	/* TIC mode                        */
+#define TUCR_TTST	0x00000080	/* Trim TeST mode                  */
+#define TUCR_RCRC	0x00000100	/* Richard's Cyclic Redundancy     */
+                	        	/* Check                           */
+#define TUCR_PMD	0x00000200	/* Power Management Disable        */
+#define TUCR_MR 	0x00000400	/* Memory Request mode             */
+#define TUCR_NoMB	(TUCR_MR*0)	/*  No Memory Bus request & grant  */
+#define TUCR_MBGPIO	(TUCR_MR*1)	/*  Memory Bus request (MBREQ) &   */
+                	        	/*  grant (MBGNT) on GPIO [22:21]  */
+#define TUCR_CTB	Fld (3, 20)	/* Clock Test Bits                 */
+#define TUCR_FDC	0x00800000	/* RTC Force Delete Count          */
+#define TUCR_FMC	0x01000000	/* Force Michelle's Control mode   */
+#define TUCR_TMC	0x02000000	/* RTC Trimmer Multiplexer Control */
+#define TUCR_DPS	0x04000000	/* Disallow Pad Sleep              */
+#define TUCR_TSEL	Fld (3, 29)	/* clock Test SELect on GPIO [27]  */
+#define TUCR_32_768kHz	        	/*  32.768 kHz osc. on GPIO [27]   */ \
+                	(0 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHz	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
+                	(1 << FShft (TUCR_TSEL))
+#define TUCR_VDD	        	/*  VDD ring osc./16 on GPIO [27]  */ \
+                	(2 << FShft (TUCR_TSEL))
+#define TUCR_96MHzPLL	        	/*  96 MHz PLL/4 on GPIO [27]      */ \
+                	(3 << FShft (TUCR_TSEL))
+#define TUCR_Clock	        	/*  internal (fcpu/2) & 32.768 kHz */ \
+                	        	/*  Clocks on GPIO [26:27]         */ \
+                	(4 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHzA	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
+                	        	/*  (Alternative)                  */ \
+                	(5 << FShft (TUCR_TSEL))
+#define TUCR_MainPLL	        	/*  Main PLL/16 on GPIO [27]       */ \
+                	(6 << FShft (TUCR_TSEL))
+#define TUCR_VDDL	        	/*  VDDL ring osc./4 on GPIO [27]  */ \
+                	(7 << FShft (TUCR_TSEL))
+
+
+/*
+ * General-Purpose Input/Output (GPIO) control registers
+ *
+ * Registers
+ *    GPLR      	General-Purpose Input/Output (GPIO) Pin Level
+ *              	Register (read).
+ *    GPDR      	General-Purpose Input/Output (GPIO) Pin Direction
+ *              	Register (read/write).
+ *    GPSR      	General-Purpose Input/Output (GPIO) Pin output Set
+ *              	Register (write).
+ *    GPCR      	General-Purpose Input/Output (GPIO) Pin output Clear
+ *              	Register (write).
+ *    GRER      	General-Purpose Input/Output (GPIO) Rising-Edge
+ *              	detect Register (read/write).
+ *    GFER      	General-Purpose Input/Output (GPIO) Falling-Edge
+ *              	detect Register (read/write).
+ *    GEDR      	General-Purpose Input/Output (GPIO) Edge Detect
+ *              	status Register (read/write).
+ *    GAFR      	General-Purpose Input/Output (GPIO) Alternate
+ *              	Function Register (read/write).
+ *
+ * Clock
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define GPLR		__REG(0x90040000)  /* GPIO Pin Level Reg.             */
+#define GPDR		__REG(0x90040004)  /* GPIO Pin Direction Reg.         */
+#define GPSR		__REG(0x90040008)  /* GPIO Pin output Set Reg.        */
+#define GPCR		__REG(0x9004000C)  /* GPIO Pin output Clear Reg.      */
+#define GRER		__REG(0x90040010)  /* GPIO Rising-Edge detect Reg.    */
+#define GFER		__REG(0x90040014)  /* GPIO Falling-Edge detect Reg.   */
+#define GEDR		__REG(0x90040018)  /* GPIO Edge Detect status Reg.    */
+#define GAFR		__REG(0x9004001C)  /* GPIO Alternate Function Reg.    */
+
+#define GPIO_MIN	(0)
+#define GPIO_MAX	(27)
+
+#define GPIO_GPIO(Nb)	        	/* GPIO [0..27]                    */ \
+                	(0x00000001 << (Nb))
+#define GPIO_GPIO0	GPIO_GPIO (0)	/* GPIO  [0]                       */
+#define GPIO_GPIO1	GPIO_GPIO (1)	/* GPIO  [1]                       */
+#define GPIO_GPIO2	GPIO_GPIO (2)	/* GPIO  [2]                       */
+#define GPIO_GPIO3	GPIO_GPIO (3)	/* GPIO  [3]                       */
+#define GPIO_GPIO4	GPIO_GPIO (4)	/* GPIO  [4]                       */
+#define GPIO_GPIO5	GPIO_GPIO (5)	/* GPIO  [5]                       */
+#define GPIO_GPIO6	GPIO_GPIO (6)	/* GPIO  [6]                       */
+#define GPIO_GPIO7	GPIO_GPIO (7)	/* GPIO  [7]                       */
+#define GPIO_GPIO8	GPIO_GPIO (8)	/* GPIO  [8]                       */
+#define GPIO_GPIO9	GPIO_GPIO (9)	/* GPIO  [9]                       */
+#define GPIO_GPIO10	GPIO_GPIO (10)	/* GPIO [10]                       */
+#define GPIO_GPIO11	GPIO_GPIO (11)	/* GPIO [11]                       */
+#define GPIO_GPIO12	GPIO_GPIO (12)	/* GPIO [12]                       */
+#define GPIO_GPIO13	GPIO_GPIO (13)	/* GPIO [13]                       */
+#define GPIO_GPIO14	GPIO_GPIO (14)	/* GPIO [14]                       */
+#define GPIO_GPIO15	GPIO_GPIO (15)	/* GPIO [15]                       */
+#define GPIO_GPIO16	GPIO_GPIO (16)	/* GPIO [16]                       */
+#define GPIO_GPIO17	GPIO_GPIO (17)	/* GPIO [17]                       */
+#define GPIO_GPIO18	GPIO_GPIO (18)	/* GPIO [18]                       */
+#define GPIO_GPIO19	GPIO_GPIO (19)	/* GPIO [19]                       */
+#define GPIO_GPIO20	GPIO_GPIO (20)	/* GPIO [20]                       */
+#define GPIO_GPIO21	GPIO_GPIO (21)	/* GPIO [21]                       */
+#define GPIO_GPIO22	GPIO_GPIO (22)	/* GPIO [22]                       */
+#define GPIO_GPIO23	GPIO_GPIO (23)	/* GPIO [23]                       */
+#define GPIO_GPIO24	GPIO_GPIO (24)	/* GPIO [24]                       */
+#define GPIO_GPIO25	GPIO_GPIO (25)	/* GPIO [25]                       */
+#define GPIO_GPIO26	GPIO_GPIO (26)	/* GPIO [26]                       */
+#define GPIO_GPIO27	GPIO_GPIO (27)	/* GPIO [27]                       */
+
+#define GPIO_LDD(Nb)	        	/* LCD Data [8..15] (O)            */ \
+                	GPIO_GPIO ((Nb) - 6)
+#define GPIO_LDD8	GPIO_LDD (8)	/* LCD Data  [8] (O)               */
+#define GPIO_LDD9	GPIO_LDD (9)	/* LCD Data  [9] (O)               */
+#define GPIO_LDD10	GPIO_LDD (10)	/* LCD Data [10] (O)               */
+#define GPIO_LDD11	GPIO_LDD (11)	/* LCD Data [11] (O)               */
+#define GPIO_LDD12	GPIO_LDD (12)	/* LCD Data [12] (O)               */
+#define GPIO_LDD13	GPIO_LDD (13)	/* LCD Data [13] (O)               */
+#define GPIO_LDD14	GPIO_LDD (14)	/* LCD Data [14] (O)               */
+#define GPIO_LDD15	GPIO_LDD (15)	/* LCD Data [15] (O)               */
+                	        	/* ser. port 4:                    */
+#define GPIO_SSP_TXD	GPIO_GPIO (10)	/*  SSP Transmit Data (O)          */
+#define GPIO_SSP_RXD	GPIO_GPIO (11)	/*  SSP Receive Data (I)           */
+#define GPIO_SSP_SCLK	GPIO_GPIO (12)	/*  SSP Sample CLocK (O)           */
+#define GPIO_SSP_SFRM	GPIO_GPIO (13)	/*  SSP Sample FRaMe (O)           */
+                	        	/* ser. port 1:                    */
+#define GPIO_UART_TXD	GPIO_GPIO (14)	/*  UART Transmit Data (O)         */
+#define GPIO_UART_RXD	GPIO_GPIO (15)	/*  UART Receive Data (I)          */
+#define GPIO_SDLC_SCLK	GPIO_GPIO (16)	/*  SDLC Sample CLocK (I/O)        */
+#define GPIO_SDLC_AAF	GPIO_GPIO (17)	/*  SDLC Abort After Frame (O)     */
+#define GPIO_UART_SCLK1	GPIO_GPIO (18)	/*  UART Sample CLocK 1 (I)        */
+                	        	/* ser. port 4:                    */
+#define GPIO_SSP_CLK	GPIO_GPIO (19)	/*  SSP external CLocK (I)         */
+                	        	/* ser. port 3:                    */
+#define GPIO_UART_SCLK3	GPIO_GPIO (20)	/*  UART Sample CLocK 3 (I)        */
+                	        	/* ser. port 4:                    */
+#define GPIO_MCP_CLK	GPIO_GPIO (21)	/*  MCP CLocK (I)                  */
+                	        	/* test controller:                */
+#define GPIO_TIC_ACK	GPIO_GPIO (21)	/*  TIC ACKnowledge (O)            */
+#define GPIO_MBGNT	GPIO_GPIO (21)	/*  Memory Bus GraNT (O)           */
+#define GPIO_TREQA	GPIO_GPIO (22)	/*  TIC REQuest A (I)              */
+#define GPIO_MBREQ	GPIO_GPIO (22)	/*  Memory Bus REQuest (I)         */
+#define GPIO_TREQB	GPIO_GPIO (23)	/*  TIC REQuest B (I)              */
+#define GPIO_1Hz	GPIO_GPIO (25)	/* 1 Hz clock (O)                  */
+#define GPIO_RCLK	GPIO_GPIO (26)	/* internal (R) CLocK (O, fcpu/2)  */
+#define GPIO_32_768kHz	GPIO_GPIO (27)	/* 32.768 kHz clock (O, RTC)       */
+
+#define GPDR_In 	0       	/* Input                           */
+#define GPDR_Out	1       	/* Output                          */
+
+
+/*
+ * Interrupt Controller (IC) control registers
+ *
+ * Registers
+ *    ICIP      	Interrupt Controller (IC) Interrupt ReQuest (IRQ)
+ *              	Pending register (read).
+ *    ICMR      	Interrupt Controller (IC) Mask Register (read/write).
+ *    ICLR      	Interrupt Controller (IC) Level Register (read/write).
+ *    ICCR      	Interrupt Controller (IC) Control Register
+ *              	(read/write).
+ *              	[The ICCR register is only implemented in versions 2.0
+ *              	(rev. = 8) and higher of the StrongARM SA-1100.]
+ *    ICFP      	Interrupt Controller (IC) Fast Interrupt reQuest
+ *              	(FIQ) Pending register (read).
+ *    ICPR      	Interrupt Controller (IC) Pending Register (read).
+ *              	[The ICPR register is active low (inverted) in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it is active high (non-inverted) in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ */
+
+#define ICIP		__REG(0x90050000)  /* IC IRQ Pending reg.             */
+#define ICMR		__REG(0x90050004)  /* IC Mask Reg.                    */
+#define ICLR		__REG(0x90050008)  /* IC Level Reg.                   */
+#define ICCR		__REG(0x9005000C)  /* IC Control Reg.                 */
+#define ICFP		__REG(0x90050010)  /* IC FIQ Pending reg.             */
+#define ICPR		__REG(0x90050020)  /* IC Pending Reg.                 */
+
+#define IC_GPIO(Nb)	        	/* GPIO [0..10]                    */ \
+                	(0x00000001 << (Nb))
+#define IC_GPIO0	IC_GPIO (0)	/* GPIO  [0]                       */
+#define IC_GPIO1	IC_GPIO (1)	/* GPIO  [1]                       */
+#define IC_GPIO2	IC_GPIO (2)	/* GPIO  [2]                       */
+#define IC_GPIO3	IC_GPIO (3)	/* GPIO  [3]                       */
+#define IC_GPIO4	IC_GPIO (4)	/* GPIO  [4]                       */
+#define IC_GPIO5	IC_GPIO (5)	/* GPIO  [5]                       */
+#define IC_GPIO6	IC_GPIO (6)	/* GPIO  [6]                       */
+#define IC_GPIO7	IC_GPIO (7)	/* GPIO  [7]                       */
+#define IC_GPIO8	IC_GPIO (8)	/* GPIO  [8]                       */
+#define IC_GPIO9	IC_GPIO (9)	/* GPIO  [9]                       */
+#define IC_GPIO10	IC_GPIO (10)	/* GPIO [10]                       */
+#define IC_GPIO11_27	0x00000800	/* GPIO [11:27] (ORed)             */
+#define IC_LCD  	0x00001000	/* LCD controller                  */
+#define IC_Ser0UDC	0x00002000	/* Ser. port 0 UDC                 */
+#define IC_Ser1SDLC	0x00004000	/* Ser. port 1 SDLC                */
+#define IC_Ser1UART	0x00008000	/* Ser. port 1 UART                */
+#define IC_Ser2ICP	0x00010000	/* Ser. port 2 ICP                 */
+#define IC_Ser3UART	0x00020000	/* Ser. port 3 UART                */
+#define IC_Ser4MCP	0x00040000	/* Ser. port 4 MCP                 */
+#define IC_Ser4SSP	0x00080000	/* Ser. port 4 SSP                 */
+#define IC_DMA(Nb)	        	/* DMA controller channel [0..5]   */ \
+                	(0x00100000 << (Nb))
+#define IC_DMA0 	IC_DMA (0)	/* DMA controller channel 0        */
+#define IC_DMA1 	IC_DMA (1)	/* DMA controller channel 1        */
+#define IC_DMA2 	IC_DMA (2)	/* DMA controller channel 2        */
+#define IC_DMA3 	IC_DMA (3)	/* DMA controller channel 3        */
+#define IC_DMA4 	IC_DMA (4)	/* DMA controller channel 4        */
+#define IC_DMA5 	IC_DMA (5)	/* DMA controller channel 5        */
+#define IC_OST(Nb)	        	/* OS Timer match [0..3]           */ \
+                	(0x04000000 << (Nb))
+#define IC_OST0 	IC_OST (0)	/* OS Timer match 0                */
+#define IC_OST1 	IC_OST (1)	/* OS Timer match 1                */
+#define IC_OST2 	IC_OST (2)	/* OS Timer match 2                */
+#define IC_OST3 	IC_OST (3)	/* OS Timer match 3                */
+#define IC_RTC1Hz	0x40000000	/* RTC 1 Hz clock                  */
+#define IC_RTCAlrm	0x80000000	/* RTC Alarm                       */
+
+#define ICLR_IRQ	0       	/* Interrupt ReQuest               */
+#define ICLR_FIQ	1       	/* Fast Interrupt reQuest          */
+
+#define ICCR_DIM	0x00000001	/* Disable Idle-mode interrupt     */
+                	        	/* Mask                            */
+#define ICCR_IdleAllInt	(ICCR_DIM*0)	/*  Idle-mode All Interrupt enable */
+                	        	/*  (ICMR ignored)                 */
+#define ICCR_IdleMskInt	(ICCR_DIM*1)	/*  Idle-mode non-Masked Interrupt */
+                	        	/*  enable (ICMR used)             */
+
+
+/*
+ * Peripheral Pin Controller (PPC) control registers
+ *
+ * Registers
+ *    PPDR      	Peripheral Pin Controller (PPC) Pin Direction
+ *              	Register (read/write).
+ *    PPSR      	Peripheral Pin Controller (PPC) Pin State Register
+ *              	(read/write).
+ *    PPAR      	Peripheral Pin Controller (PPC) Pin Assignment
+ *              	Register (read/write).
+ *    PSDR      	Peripheral Pin Controller (PPC) Sleep-mode pin
+ *              	Direction Register (read/write).
+ *    PPFR      	Peripheral Pin Controller (PPC) Pin Flag Register
+ *              	(read).
+ */
+
+#define PPDR		__REG(0x90060000)  /* PPC Pin Direction Reg.          */
+#define PPSR		__REG(0x90060004)  /* PPC Pin State Reg.              */
+#define PPAR		__REG(0x90060008)  /* PPC Pin Assignment Reg.         */
+#define PSDR		__REG(0x9006000C)  /* PPC Sleep-mode pin Direction Reg. */
+#define PPFR		__REG(0x90060010)  /* PPC Pin Flag Reg.               */
+
+#define PPC_LDD(Nb)	        	/* LCD Data [0..7]                 */ \
+                	(0x00000001 << (Nb))
+#define PPC_LDD0	PPC_LDD (0)	/* LCD Data [0]                    */
+#define PPC_LDD1	PPC_LDD (1)	/* LCD Data [1]                    */
+#define PPC_LDD2	PPC_LDD (2)	/* LCD Data [2]                    */
+#define PPC_LDD3	PPC_LDD (3)	/* LCD Data [3]                    */
+#define PPC_LDD4	PPC_LDD (4)	/* LCD Data [4]                    */
+#define PPC_LDD5	PPC_LDD (5)	/* LCD Data [5]                    */
+#define PPC_LDD6	PPC_LDD (6)	/* LCD Data [6]                    */
+#define PPC_LDD7	PPC_LDD (7)	/* LCD Data [7]                    */
+#define PPC_L_PCLK	0x00000100	/* LCD Pixel CLocK                 */
+#define PPC_L_LCLK	0x00000200	/* LCD Line CLocK                  */
+#define PPC_L_FCLK	0x00000400	/* LCD Frame CLocK                 */
+#define PPC_L_BIAS	0x00000800	/* LCD AC BIAS                     */
+                	        	/* ser. port 1:                    */
+#define PPC_TXD1	0x00001000	/*  SDLC/UART Transmit Data 1      */
+#define PPC_RXD1	0x00002000	/*  SDLC/UART Receive Data 1       */
+                	        	/* ser. port 2:                    */
+#define PPC_TXD2	0x00004000	/*  IPC Transmit Data 2            */
+#define PPC_RXD2	0x00008000	/*  IPC Receive Data 2             */
+                	        	/* ser. port 3:                    */
+#define PPC_TXD3	0x00010000	/*  UART Transmit Data 3           */
+#define PPC_RXD3	0x00020000	/*  UART Receive Data 3            */
+                	        	/* ser. port 4:                    */
+#define PPC_TXD4	0x00040000	/*  MCP/SSP Transmit Data 4        */
+#define PPC_RXD4	0x00080000	/*  MCP/SSP Receive Data 4         */
+#define PPC_SCLK	0x00100000	/*  MCP/SSP Sample CLocK           */
+#define PPC_SFRM	0x00200000	/*  MCP/SSP Sample FRaMe           */
+
+#define PPDR_In 	0       	/* Input                           */
+#define PPDR_Out	1       	/* Output                          */
+
+                	        	/* ser. port 1:                    */
+#define PPAR_UPR	0x00001000	/*  UART Pin Reassignment          */
+#define PPAR_UARTTR	(PPAR_UPR*0)	/*   UART on TXD_1 & RXD_1         */
+#define PPAR_UARTGPIO	(PPAR_UPR*1)	/*   UART on GPIO [14:15]          */
+                	        	/* ser. port 4:                    */
+#define PPAR_SPR	0x00040000	/*  SSP Pin Reassignment           */
+#define PPAR_SSPTRSS	(PPAR_SPR*0)	/*   SSP on TXD_C, RXD_C, SCLK_C,  */
+                	        	/*   & SFRM_C                      */
+#define PPAR_SSPGPIO	(PPAR_SPR*1)	/*   SSP on GPIO [10:13]           */
+
+#define PSDR_OutL	0       	/* Output Low in sleep mode        */
+#define PSDR_Flt	1       	/* Floating (input) in sleep mode  */
+
+#define PPFR_LCD	0x00000001	/* LCD controller                  */
+#define PPFR_SP1TX	0x00001000	/* Ser. Port 1 SDLC/UART Transmit  */
+#define PPFR_SP1RX	0x00002000	/* Ser. Port 1 SDLC/UART Receive   */
+#define PPFR_SP2TX	0x00004000	/* Ser. Port 2 ICP Transmit        */
+#define PPFR_SP2RX	0x00008000	/* Ser. Port 2 ICP Receive         */
+#define PPFR_SP3TX	0x00010000	/* Ser. Port 3 UART Transmit       */
+#define PPFR_SP3RX	0x00020000	/* Ser. Port 3 UART Receive        */
+#define PPFR_SP4	0x00040000	/* Ser. Port 4 MCP/SSP             */
+#define PPFR_PerEn	0       	/* Peripheral Enabled              */
+#define PPFR_PPCEn	1       	/* PPC Enabled                     */
+
+
+/*
+ * Dynamic Random-Access Memory (DRAM) control registers
+ *
+ * Registers
+ *    MDCNFG    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	CoNFiGuration register (read/write).
+ *    MDCAS0    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 0
+ *              	(read/write).
+ *    MDCAS1    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 1
+ *              	(read/write).
+ *    MDCAS2    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 2
+ *              	(read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fcas, Tcas	Frequency, period of the DRAM CAS shift registers.
+ */
+
+#define MDCNFG		__REG(0xA0000000)  /*  DRAM CoNFiGuration reg. */
+#define MDCAS0		__REG(0xA0000004)  /* DRAM CAS shift reg. 0 */
+#define MDCAS1		__REG(0xA0000008)  /* DRAM CAS shift reg. 1 */
+#define MDCAS2		__REG(0xA000000c)  /* DRAM CAS shift reg. 2 */
+
+/* SA1100 MDCNFG values */
+#define MDCNFG_DE(Nb)	        	/* DRAM Enable bank [0..3]         */ \
+                	(0x00000001 << (Nb))
+#define MDCNFG_DE0	MDCNFG_DE (0)	/* DRAM Enable bank 0              */
+#define MDCNFG_DE1	MDCNFG_DE (1)	/* DRAM Enable bank 1              */
+#define MDCNFG_DE2	MDCNFG_DE (2)	/* DRAM Enable bank 2              */
+#define MDCNFG_DE3	MDCNFG_DE (3)	/* DRAM Enable bank 3              */
+#define MDCNFG_DRAC	Fld (2, 4)	/* DRAM Row Address Count - 9      */
+#define MDCNFG_RowAdd(Add)      	/*  Row Address count [9..12]      */ \
+                	(((Add) - 9) << FShft (MDCNFG_DRAC))
+#define MDCNFG_CDB2	0x00000040	/* shift reg. Clock Divide By 2    */
+                	        	/* (fcas = fcpu/2)                 */
+#define MDCNFG_TRP	Fld (4, 7)	/* Time RAS Pre-charge - 1 [Tmem]  */
+#define MDCNFG_PrChrg(Tcpu)     	/*  Pre-Charge time [2..32 Tcpu]   */ \
+                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_CeilPrChrg(Tcpu) 	/*  Ceil. of PrChrg [2..32 Tcpu]   */ \
+                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_TRASR	Fld (4, 11)	/* Time RAS Refresh - 1 [Tmem]     */
+#define MDCNFG_Ref(Tcpu)        	/*  Refresh time [2..32 Tcpu]      */ \
+                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_CeilRef(Tcpu)    	/*  Ceil. of Ref [2..32 Tcpu]      */ \
+                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_TDL	Fld (2, 15)	/* Time Data Latch [Tcpu]          */
+#define MDCNFG_DataLtch(Tcpu)   	/*  Data Latch delay [0..3 Tcpu]   */ \
+                	((Tcpu) << FShft (MDCNFG_TDL))
+#define MDCNFG_DRI	Fld (15, 17)	/* min. DRAM Refresh Interval/4    */
+                	        	/* [Tmem]                          */
+#define MDCNFG_RefInt(Tcpu)     	/*  min. Refresh Interval          */ \
+                	        	/*  [0..262136 Tcpu]               */ \
+                	((Tcpu)/8 << FShft (MDCNFG_DRI))
+
+/* SA1110 MDCNFG values */
+#define MDCNFG_SA1110_DE0	0x00000001	/* DRAM Enable bank 0        */
+#define MDCNFG_SA1110_DE1	0x00000002 	/* DRAM Enable bank 1        */
+#define MDCNFG_SA1110_DTIM0	0x00000004	/* DRAM timing type 0/1      */
+#define MDCNFG_SA1110_DWID0	0x00000008	/* DRAM bus width 0/1        */
+#define MDCNFG_SA1110_DRAC0	Fld(3, 4)	/* DRAM row addr bit count   */
+                	        		/* bank 0/1                  */
+#define MDCNFG_SA1110_CDB20	0x00000080	/* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP0	Fld(3, 8)	/* RAS precharge 0/1         */
+#define MDCNFG_SA1110_TDL0	Fld(2, 12)	/* Data input latch after CAS*/
+                	        		/* deassertion 0/1           */
+#define MDCNFG_SA1110_TWR0	Fld(2, 14)	/* SDRAM write recovery 0/1  */
+#define MDCNFG_SA1110_DE2	0x00010000	/* DRAM Enable bank 0        */
+#define MDCNFG_SA1110_DE3	0x00020000 	/* DRAM Enable bank 1        */
+#define MDCNFG_SA1110_DTIM2	0x00040000	/* DRAM timing type 0/1      */
+#define MDCNFG_SA1110_DWID2	0x00080000	/* DRAM bus width 0/1        */
+#define MDCNFG_SA1110_DRAC2	Fld(3, 20)	/* DRAM row addr bit count   */
+                	        		/* bank 0/1                  */
+#define MDCNFG_SA1110_CDB22	0x00800000	/* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP2	Fld(3, 24)	/* RAS precharge 0/1         */
+#define MDCNFG_SA1110_TDL2	Fld(2, 28)	/* Data input latch after CAS*/
+                	        		/* deassertion 0/1           */
+#define MDCNFG_SA1110_TWR2	Fld(2, 30)	/* SDRAM write recovery 0/1  */
+
+
+/*
+ * Static memory control registers
+ *
+ * Registers
+ *    MSC0      	Memory system: Static memory Control register 0
+ *              	(read/write).
+ *    MSC1      	Memory system: Static memory Control register 1
+ *              	(read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ */
+
+#define MSC0		__REG(0xa0000010)  /* Static memory Control reg. 0 */
+#define MSC1		__REG(0xa0000014)  /* Static memory Control reg. 1 */
+#define MSC2		__REG(0xa000002c)  /* Static memory Control reg. 2, not contiguous   */
+
+#define MSC_Bnk(Nb)	        	/* static memory Bank [0..3]       */ \
+                	Fld (16, ((Nb) Modulo 2)*16)
+#define MSC0_Bnk0	MSC_Bnk (0)	/* static memory Bank 0            */
+#define MSC0_Bnk1	MSC_Bnk (1)	/* static memory Bank 1            */
+#define MSC1_Bnk2	MSC_Bnk (2)	/* static memory Bank 2            */
+#define MSC1_Bnk3	MSC_Bnk (3)	/* static memory Bank 3            */
+
+#define MSC_RT  	Fld (2, 0)	/* ROM/static memory Type          */
+#define MSC_NonBrst	        	/*  Non-Burst static memory        */ \
+                	(0 << FShft (MSC_RT))
+#define MSC_SRAM	        	/*  32-bit byte-writable SRAM      */ \
+                	(1 << FShft (MSC_RT))
+#define MSC_Brst4	        	/*  Burst-of-4 static memory       */ \
+                	(2 << FShft (MSC_RT))
+#define MSC_Brst8	        	/*  Burst-of-8 static memory       */ \
+                	(3 << FShft (MSC_RT))
+#define MSC_RBW 	0x0004  	/* ROM/static memory Bus Width     */
+#define MSC_32BitStMem	(MSC_RBW*0)	/*  32-Bit Static Memory           */
+#define MSC_16BitStMem	(MSC_RBW*1)	/*  16-Bit Static Memory           */
+#define MSC_RDF 	Fld (5, 3)	/* ROM/static memory read Delay    */
+                	        	/* First access - 1(.5) [Tmem]     */
+#define MSC_1stRdAcc(Tcpu)      	/*  1st Read Access time (burst    */ \
+                	        	/*  static memory) [3..65 Tcpu]    */ \
+                	((((Tcpu) - 3)/2) << FShft (MSC_RDF))
+#define MSC_Ceil1stRdAcc(Tcpu)  	/*  Ceil. of 1stRdAcc [3..65 Tcpu] */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_RdAcc(Tcpu)	        	/*  Read Access time (non-burst    */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_CeilRdAcc(Tcpu)     	/*  Ceil. of RdAcc [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDF))
+#define MSC_RDN 	Fld (5, 8)	/* ROM/static memory read Delay    */
+                	        	/* Next access - 1 [Tmem]          */
+#define MSC_NxtRdAcc(Tcpu)      	/*  Next Read Access time (burst   */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilNxtRdAcc(Tcpu)  	/*  Ceil. of NxtRdAcc [2..64 Tcpu] */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_WrAcc(Tcpu)	        	/*  Write Access time (non-burst   */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilWrAcc(Tcpu)     	/*  Ceil. of WrAcc [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_RRR 	Fld (3, 13)	/* ROM/static memory RecoveRy      */
+                	        	/* time/2 [Tmem]                   */
+#define MSC_Rec(Tcpu)	        	/*  Recovery time [0..28 Tcpu]     */ \
+                	(((Tcpu)/4) << FShft (MSC_RRR))
+#define MSC_CeilRec(Tcpu)       	/*  Ceil. of Rec [0..28 Tcpu]      */ \
+                	((((Tcpu) + 3)/4) << FShft (MSC_RRR))
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) control
+ * register
+ *
+ * Register
+ *    MECR      	Memory system: Expansion memory bus (PCMCIA)
+ *              	Configuration Register (read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fbclk, Tbclk	Frequency, period of the PCMCIA clock (BCLK).
+ */
+
+                	        	/* Memory system:                  */
+#define MECR		__REG(0xA0000018)  /*  Expansion memory bus (PCMCIA) Configuration Reg.             */
+
+#define MECR_PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	Fld (15, (Nb)*16)
+#define MECR_PCMCIA0	MECR_PCMCIA (0)	/* PCMCIA 0                        */
+#define MECR_PCMCIA1	MECR_PCMCIA (1)	/* PCMCIA 1                        */
+
+#define MECR_BSIO	Fld (5, 0)	/* BCLK Select I/O - 1 [Tmem]      */
+#define MECR_IOClk(Tcpu)        	/*  I/O Clock [2..64 Tcpu]         */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
+#define MECR_CeilIOClk(Tcpu)    	/*  Ceil. of IOClk [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
+#define MECR_BSA	Fld (5, 5)	/* BCLK Select Attribute - 1       */
+                	        	/* [Tmem]                          */
+#define MECR_AttrClk(Tcpu)      	/*  Attribute Clock [2..64 Tcpu]   */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSA))
+#define MECR_CeilAttrClk(Tcpu)  	/*  Ceil. of AttrClk [2..64 Tcpu]  */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSA))
+#define MECR_BSM	Fld (5, 10)	/* BCLK Select Memory - 1 [Tmem]   */
+#define MECR_MemClk(Tcpu)       	/*  Memory Clock [2..64 Tcpu]      */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSM))
+#define MECR_CeilMemClk(Tcpu)   	/*  Ceil. of MemClk [2..64 Tcpu]   */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSM))
+
+/*
+ * On SA1110 only
+ */
+
+#define MDREFR		__REG(0xA000001C)
+
+#define MDREFR_TRASR		Fld (4, 0)
+#define MDREFR_DRI		Fld (12, 4)
+#define MDREFR_E0PIN		(1 << 16)
+#define MDREFR_K0RUN		(1 << 17)
+#define MDREFR_K0DB2		(1 << 18)
+#define MDREFR_E1PIN		(1 << 20)
+#define MDREFR_K1RUN		(1 << 21)
+#define MDREFR_K1DB2		(1 << 22)
+#define MDREFR_K2RUN		(1 << 25)
+#define MDREFR_K2DB2		(1 << 26)
+#define MDREFR_EAPD		(1 << 28)
+#define MDREFR_KAPD		(1 << 29)
+#define MDREFR_SLFRSH		(1 << 31)
+
+
+/*
+ * Direct Memory Access (DMA) control registers
+ *
+ * Registers
+ *    DDAR0     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 0 (read/write).
+ *    DCSR0     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 0 (read/write).
+ *    DBSA0     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 0 (read/write).
+ *    DBTA0     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 0 (read/write).
+ *    DBSB0     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 0 (read/write).
+ *    DBTB0     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 0 (read/write).
+ *
+ *    DDAR1     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 1 (read/write).
+ *    DCSR1     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 1 (read/write).
+ *    DBSA1     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 1 (read/write).
+ *    DBTA1     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 1 (read/write).
+ *    DBSB1     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 1 (read/write).
+ *    DBTB1     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 1 (read/write).
+ *
+ *    DDAR2     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 2 (read/write).
+ *    DCSR2     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 2 (read/write).
+ *    DBSA2     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 2 (read/write).
+ *    DBTA2     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 2 (read/write).
+ *    DBSB2     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 2 (read/write).
+ *    DBTB2     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 2 (read/write).
+ *
+ *    DDAR3     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 3 (read/write).
+ *    DCSR3     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 3 (read/write).
+ *    DBSA3     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 3 (read/write).
+ *    DBTA3     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 3 (read/write).
+ *    DBSB3     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 3 (read/write).
+ *    DBTB3     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 3 (read/write).
+ *
+ *    DDAR4     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 4 (read/write).
+ *    DCSR4     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 4 (read/write).
+ *    DBSA4     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 4 (read/write).
+ *    DBTA4     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 4 (read/write).
+ *    DBSB4     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 4 (read/write).
+ *    DBTB4     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 4 (read/write).
+ *
+ *    DDAR5     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 5 (read/write).
+ *    DCSR5     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 5 (read/write).
+ *    DBSA5     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 5 (read/write).
+ *    DBTA5     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 5 (read/write).
+ *    DBSB5     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 5 (read/write).
+ *    DBTB5     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 5 (read/write).
+ */
+
+#define DMASp   	0x00000020	/* DMA control reg. Space [byte]   */
+
+#define DDAR(Nb)	__REG(0xB0000000 + (Nb)*DMASp)  /* DMA Device Address Reg. channel [0..5] */
+#define SetDCSR(Nb)	__REG(0xB0000004 + (Nb)*DMASp)  /* Set DMA Control & Status Reg. channel [0..5] (write) */
+#define ClrDCSR(Nb)	__REG(0xB0000008 + (Nb)*DMASp)  /* Clear DMA Control & Status Reg. channel [0..5] (write) */
+#define RdDCSR(Nb)	__REG(0xB000000C + (Nb)*DMASp)  /* Read DMA Control & Status Reg. channel [0..5] (read) */
+#define DBSA(Nb)	__REG(0xB0000010 + (Nb)*DMASp)  /* DMA Buffer Start address reg. A channel [0..5] */
+#define DBTA(Nb)	__REG(0xB0000014 + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. A channel [0..5] */
+#define DBSB(Nb)	__REG(0xB0000018 + (Nb)*DMASp)  /* DMA Buffer Start address reg. B channel [0..5] */
+#define DBTB(Nb)	__REG(0xB000001C + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. B channel [0..5] */
+
+#define DDAR_RW 	0x00000001	/* device data Read/Write          */
+#define DDAR_DevWr	(DDAR_RW*0)	/*  Device data Write              */
+                	        	/*  (memory -> device)             */
+#define DDAR_DevRd	(DDAR_RW*1)	/*  Device data Read               */
+                	        	/*  (device -> memory)             */
+#define DDAR_E  	0x00000002	/* big/little Endian device        */
+#define DDAR_LtlEnd	(DDAR_E*0)	/*  Little Endian device           */
+#define DDAR_BigEnd	(DDAR_E*1)	/*  Big Endian device              */
+#define DDAR_BS 	0x00000004	/* device Burst Size               */
+#define DDAR_Brst4	(DDAR_BS*0)	/*  Burst-of-4 device              */
+#define DDAR_Brst8	(DDAR_BS*1)	/*  Burst-of-8 device              */
+#define DDAR_DW 	0x00000008	/* device Data Width               */
+#define DDAR_8BitDev	(DDAR_DW*0)	/*  8-Bit Device                   */
+#define DDAR_16BitDev	(DDAR_DW*1)	/*  16-Bit Device                  */
+#define DDAR_DS 	Fld (4, 4)	/* Device Select                   */
+#define DDAR_Ser0UDCTr	        	/*  Ser. port 0 UDC Transmit       */ \
+                	(0x0 << FShft (DDAR_DS))
+#define DDAR_Ser0UDCRc	        	/*  Ser. port 0 UDC Receive        */ \
+                	(0x1 << FShft (DDAR_DS))
+#define DDAR_Ser1SDLCTr	        	/*  Ser. port 1 SDLC Transmit      */ \
+                	(0x2 << FShft (DDAR_DS))
+#define DDAR_Ser1SDLCRc	        	/*  Ser. port 1 SDLC Receive       */ \
+                	(0x3 << FShft (DDAR_DS))
+#define DDAR_Ser1UARTTr	        	/*  Ser. port 1 UART Transmit      */ \
+                	(0x4 << FShft (DDAR_DS))
+#define DDAR_Ser1UARTRc	        	/*  Ser. port 1 UART Receive       */ \
+                	(0x5 << FShft (DDAR_DS))
+#define DDAR_Ser2ICPTr	        	/*  Ser. port 2 ICP Transmit       */ \
+                	(0x6 << FShft (DDAR_DS))
+#define DDAR_Ser2ICPRc	        	/*  Ser. port 2 ICP Receive        */ \
+                	(0x7 << FShft (DDAR_DS))
+#define DDAR_Ser3UARTTr	        	/*  Ser. port 3 UART Transmit      */ \
+                	(0x8 << FShft (DDAR_DS))
+#define DDAR_Ser3UARTRc	        	/*  Ser. port 3 UART Receive       */ \
+                	(0x9 << FShft (DDAR_DS))
+#define DDAR_Ser4MCP0Tr	        	/*  Ser. port 4 MCP 0 Transmit     */ \
+                	        	/*  (audio)                        */ \
+                	(0xA << FShft (DDAR_DS))
+#define DDAR_Ser4MCP0Rc	        	/*  Ser. port 4 MCP 0 Receive      */ \
+                	        	/*  (audio)                        */ \
+                	(0xB << FShft (DDAR_DS))
+#define DDAR_Ser4MCP1Tr	        	/*  Ser. port 4 MCP 1 Transmit     */ \
+                	        	/*  (telecom)                      */ \
+                	(0xC << FShft (DDAR_DS))
+#define DDAR_Ser4MCP1Rc	        	/*  Ser. port 4 MCP 1 Receive      */ \
+                	        	/*  (telecom)                      */ \
+                	(0xD << FShft (DDAR_DS))
+#define DDAR_Ser4SSPTr	        	/*  Ser. port 4 SSP Transmit       */ \
+                	(0xE << FShft (DDAR_DS))
+#define DDAR_Ser4SSPRc	        	/*  Ser. port 4 SSP Receive        */ \
+                	(0xF << FShft (DDAR_DS))
+#define DDAR_DA 	Fld (24, 8)	/* Device Address                  */
+#define DDAR_DevAdd(Add)        	/*  Device Address                 */ \
+                	(((Add) & 0xF0000000) | \
+                	 (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
+#define DDAR_Ser0UDCWr	        	/* Ser. port 0 UDC Write           */ \
+                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
+#define DDAR_Ser0UDCRd	        	/* Ser. port 0 UDC Read            */ \
+                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
+#define DDAR_Ser1UARTWr	        	/* Ser. port 1 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
+#define DDAR_Ser1UARTRd	        	/* Ser. port 1 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
+#define DDAR_Ser1SDLCWr	        	/* Ser. port 1 SDLC Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
+#define DDAR_Ser1SDLCRd	        	/* Ser. port 1 SDLC Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
+#define DDAR_Ser2UARTWr	        	/* Ser. port 2 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
+#define DDAR_Ser2UARTRd	        	/* Ser. port 2 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
+#define DDAR_Ser2HSSPWr	        	/* Ser. port 2 HSSP Write          */ \
+                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
+#define DDAR_Ser2HSSPRd	        	/* Ser. port 2 HSSP Read           */ \
+                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
+#define DDAR_Ser3UARTWr	        	/* Ser. port 3 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
+#define DDAR_Ser3UARTRd	        	/* Ser. port 3 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
+#define DDAR_Ser4MCP0Wr	        	/* Ser. port 4 MCP 0 Write (audio) */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
+#define DDAR_Ser4MCP0Rd	        	/* Ser. port 4 MCP 0 Read (audio)  */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
+#define DDAR_Ser4MCP1Wr	        	/* Ser. port 4 MCP 1 Write         */ \
+                	        	/* (telecom)                       */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
+#define DDAR_Ser4MCP1Rd	        	/* Ser. port 4 MCP 1 Read          */ \
+                	        	/* (telecom)                       */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
+#define DDAR_Ser4SSPWr	        	/* Ser. port 4 SSP Write (16 bits) */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
+#define DDAR_Ser4SSPRd	        	/* Ser. port 4 SSP Read (16 bits)  */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
+
+#define DCSR_RUN	0x00000001	/* DMA RUNing                      */
+#define DCSR_IE 	0x00000002	/* DMA Interrupt Enable            */
+#define DCSR_ERROR	0x00000004	/* DMA ERROR                       */
+#define DCSR_DONEA	0x00000008	/* DONE DMA transfer buffer A      */
+#define DCSR_STRTA	0x00000010	/* STaRTed DMA transfer buffer A   */
+#define DCSR_DONEB	0x00000020	/* DONE DMA transfer buffer B      */
+#define DCSR_STRTB	0x00000040	/* STaRTed DMA transfer buffer B   */
+#define DCSR_BIU	0x00000080	/* DMA Buffer In Use               */
+#define DCSR_BufA	(DCSR_BIU*0)	/*  DMA Buffer A in use            */
+#define DCSR_BufB	(DCSR_BIU*1)	/*  DMA Buffer B in use            */
+
+#define DBT_TC  	Fld (13, 0)	/* Transfer Count                  */
+#define DBTA_TCA	DBT_TC  	/* Transfer Count buffer A         */
+#define DBTB_TCB	DBT_TC  	/* Transfer Count buffer B         */
+
+
+/*
+ * Liquid Crystal Display (LCD) control registers
+ *
+ * Registers
+ *    LCCR0     	Liquid Crystal Display (LCD) Control Register 0
+ *              	(read/write).
+ *              	[Bits LDM, BAM, and ERM are only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ *    LCSR      	Liquid Crystal Display (LCD) Status Register
+ *              	(read/write).
+ *              	[Bit LDD can be only read in versions 1.0 (rev. = 1)
+ *              	and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
+ *              	read and written (cleared) in versions 2.0 (rev. = 8)
+ *              	and higher.]
+ *    DBAR1     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Base Address Register channel 1 (read/write).
+ *    DCAR1     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Current Address Register channel 1 (read).
+ *    DBAR2     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Base Address Register channel 2 (read/write).
+ *    DCAR2     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Current Address Register channel 2 (read).
+ *    LCCR1     	Liquid Crystal Display (LCD) Control Register 1
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ *    LCCR2     	Liquid Crystal Display (LCD) Control Register 2
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ *    LCCR3     	Liquid Crystal Display (LCD) Control Register 3
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher. Bit PCP is only
+ *              	implemented in versions 2.0 (rev. = 8) and higher of
+ *              	the StrongARM SA-1100.]
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fpix, Tpix	Frequency, period of the pixel clock.
+ *    fln, Tln  	Frequency, period of the line clock.
+ *    fac, Tac  	Frequency, period of the AC bias clock.
+ */
+
+#define LCD_PEntrySp	2       	/* LCD Palette Entry Space [byte]  */
+#define LCD_4BitPSp	        	/* LCD 4-Bit pixel Palette Space   */ \
+                	        	/* [byte]                          */ \
+                	(16*LCD_PEntrySp)
+#define LCD_8BitPSp	        	/* LCD 8-Bit pixel Palette Space   */ \
+                	        	/* [byte]                          */ \
+                	(256*LCD_PEntrySp)
+#define LCD_12_16BitPSp	        	/* LCD 12/16-Bit pixel             */ \
+                	        	/* dummy-Palette Space [byte]      */ \
+                	(16*LCD_PEntrySp)
+
+#define LCD_PGrey	Fld (4, 0)	/* LCD Palette entry Grey value    */
+#define LCD_PBlue	Fld (4, 0)	/* LCD Palette entry Blue value    */
+#define LCD_PGreen	Fld (4, 4)	/* LCD Palette entry Green value   */
+#define LCD_PRed	Fld (4, 8)	/* LCD Palette entry Red value     */
+#define LCD_PBS 	Fld (2, 12)	/* LCD Pixel Bit Size              */
+#define LCD_4Bit	        	/*  LCD 4-Bit pixel mode           */ \
+                	(0 << FShft (LCD_PBS))
+#define LCD_8Bit	        	/*  LCD 8-Bit pixel mode           */ \
+                	(1 << FShft (LCD_PBS))
+#define LCD_12_16Bit	        	/*  LCD 12/16-Bit pixel mode       */ \
+                	(2 << FShft (LCD_PBS))
+
+#define LCD_Int0_0	0x0     	/* LCD Intensity =   0.0% =  0     */
+#define LCD_Int11_1	0x1     	/* LCD Intensity =  11.1% =  1/9   */
+#define LCD_Int20_0	0x2     	/* LCD Intensity =  20.0% =  1/5   */
+#define LCD_Int26_7	0x3     	/* LCD Intensity =  26.7% =  4/15  */
+#define LCD_Int33_3	0x4     	/* LCD Intensity =  33.3% =  3/9   */
+#define LCD_Int40_0	0x5     	/* LCD Intensity =  40.0% =  2/5   */
+#define LCD_Int44_4	0x6     	/* LCD Intensity =  44.4% =  4/9   */
+#define LCD_Int50_0	0x7     	/* LCD Intensity =  50.0% =  1/2   */
+#define LCD_Int55_6	0x8     	/* LCD Intensity =  55.6% =  5/9   */
+#define LCD_Int60_0	0x9     	/* LCD Intensity =  60.0% =  3/5   */
+#define LCD_Int66_7	0xA     	/* LCD Intensity =  66.7% =  6/9   */
+#define LCD_Int73_3	0xB     	/* LCD Intensity =  73.3% = 11/15  */
+#define LCD_Int80_0	0xC     	/* LCD Intensity =  80.0% =  4/5   */
+#define LCD_Int88_9	0xD     	/* LCD Intensity =  88.9% =  8/9   */
+#define LCD_Int100_0	0xE     	/* LCD Intensity = 100.0% =  1     */
+#define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
+                	        	/* (Alternative)                   */
+
+#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
+#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
+#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
+#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
+#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
+#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
+
+#define LCCR0_LEN	0x00000001	/* LCD ENable                      */
+#define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display             */
+#define LCCR0_SDS	0x00000004	/* Single/Dual panel display       */
+                	        	/* Select                          */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display           */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display             */
+#define LCCR0_LDM	0x00000008	/* LCD Disable done (LDD)          */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_BAM	0x00000010	/* Base Address update (BAU)       */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_ERM	0x00000020	/* LCD ERror (BER, IOL, IUL, IOU,  */
+                	        	/* IUU, OOL, OUL, OOU, and OUU)    */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_PAS	0x00000080	/* Passive/Active display Select   */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN)          */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT)           */
+#define LCCR0_BLE	0x00000100	/* Big/Little Endian select        */
+#define LCCR0_LtlEnd	(LCCR0_BLE*0)	/*  Little Endian frame buffer     */
+#define LCCR0_BigEnd	(LCCR0_BLE*1)	/*  Big Endian frame buffer        */
+#define LCCR0_DPD	0x00000200	/* Double Pixel Data (monochrome   */
+                	        	/* display mode)                   */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome       */
+                	        	/*  display                        */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome       */
+                	        	/*  display                        */
+#define LCCR0_PDD	Fld (8, 12)	/* Palette DMA request Delay       */
+                	        	/* [Tmem]                          */
+#define LCCR0_DMADel(Tcpu)      	/*  palette DMA request Delay      */ \
+                	        	/*  [0..510 Tcpu]                  */ \
+                	((Tcpu)/2 << FShft (LCCR0_PDD))
+
+#define LCSR_LDD	0x00000001	/* LCD Disable Done                */
+#define LCSR_BAU	0x00000002	/* Base Address Update (read)      */
+#define LCSR_BER	0x00000004	/* Bus ERror                       */
+#define LCSR_ABC	0x00000008	/* AC Bias clock Count             */
+#define LCSR_IOL	0x00000010	/* Input FIFO Over-run Lower       */
+                	        	/* panel                           */
+#define LCSR_IUL	0x00000020	/* Input FIFO Under-run Lower      */
+                	        	/* panel                           */
+#define LCSR_IOU	0x00000040	/* Input FIFO Over-run Upper       */
+                	        	/* panel                           */
+#define LCSR_IUU	0x00000080	/* Input FIFO Under-run Upper      */
+                	        	/* panel                           */
+#define LCSR_OOL	0x00000100	/* Output FIFO Over-run Lower      */
+                	        	/* panel                           */
+#define LCSR_OUL	0x00000200	/* Output FIFO Under-run Lower     */
+                	        	/* panel                           */
+#define LCSR_OOU	0x00000400	/* Output FIFO Over-run Upper      */
+                	        	/* panel                           */
+#define LCSR_OUU	0x00000800	/* Output FIFO Under-run Upper     */
+                	        	/* panel                           */
+
+#define LCCR1_PPL	Fld (6, 4)	/* Pixels Per Line/16 - 1          */
+#define LCCR1_DisWdth(Pixel)    	/*  Display Width [16..1024 pix.]  */ \
+                	(((Pixel) - 16)/16 << FShft (LCCR1_PPL))
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization      */
+                	        	/* pulse Width - 1 [Tpix] (L_LCLK) */
+#define LCCR1_HorSnchWdth(Tpix) 	/*  Horizontal Synchronization     */ \
+                	        	/*  pulse Width [1..64 Tpix]       */ \
+                	(((Tpix) - 1) << FShft (LCCR1_HSW))
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait    */
+                	        	/* count - 1 [Tpix]                */
+#define LCCR1_EndLnDel(Tpix)    	/*  End-of-Line Delay              */ \
+                	        	/*  [1..256 Tpix]                  */ \
+                	(((Tpix) - 1) << FShft (LCCR1_ELW))
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock   */
+                	        	/* Wait count - 1 [Tpix]           */
+#define LCCR1_BegLnDel(Tpix)    	/*  Beginning-of-Line Delay        */ \
+                	        	/*  [1..256 Tpix]                  */ \
+                	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1              */
+#define LCCR2_DisHght(Line)     	/*  Display Height [1..1024 lines] */ \
+                	(((Line) - 1) << FShft (LCCR2_LPP))
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse  */
+                	        	/* Width - 1 [Tln] (L_FCLK)        */
+#define LCCR2_VrtSnchWdth(Tln)  	/*  Vertical Synchronization pulse */ \
+                	        	/*  Width [1..64 Tln]              */ \
+                	(((Tln) - 1) << FShft (LCCR2_VSW))
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait    */
+                	        	/* count [Tln]                     */
+#define LCCR2_EndFrmDel(Tln)    	/*  End-of-Frame Delay             */ \
+                	        	/*  [0..255 Tln]                   */ \
+                	((Tln) << FShft (LCCR2_EFW))
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock   */
+                	        	/* Wait count [Tln]                */
+#define LCCR2_BegFrmDel(Tln)    	/*  Beginning-of-Frame Delay       */ \
+                	        	/*  [0..255 Tln]                   */ \
+                	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor/2 - 2       */
+                	        	/* [1..255] (L_PCLK)               */
+                	        	/* fpix = fcpu/(2*(PCD + 2))       */
+                	        	/* Tpix = 2*(PCD + 2)*Tcpu         */
+#define LCCR3_PixClkDiv(Div)    	/*  Pixel Clock Divisor [6..514]   */ \
+                	(((Div) - 4)/2 << FShft (LCCR3_PCD))
+                	        	/*  fpix = fcpu/(2*Floor (Div/2))  */
+                	        	/*  Tpix = 2*Floor (Div/2)*Tcpu    */
+#define LCCR3_CeilPixClkDiv(Div)	/*  Ceil. of PixClkDiv [6..514]    */ \
+                	(((Div) - 3)/2 << FShft (LCCR3_PCD))
+                	        	/*  fpix = fcpu/(2*Ceil (Div/2))   */
+                	        	/*  Tpix = 2*Ceil (Div/2)*Tcpu     */
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias clock half period - 1   */
+                	        	/* [Tln] (L_BIAS)                  */
+#define LCCR3_ACBsDiv(Div)      	/*  AC Bias clock Divisor [2..512] */ \
+                	(((Div) - 2)/2 << FShft (LCCR3_ACB))
+                	        	/*  fac = fln/(2*Floor (Div/2))    */
+                	        	/*  Tac = 2*Floor (Div/2)*Tln      */
+#define LCCR3_CeilACBsDiv(Div)  	/*  Ceil. of ACBsDiv [2..512]      */ \
+                	(((Div) - 1)/2 << FShft (LCCR3_ACB))
+                	        	/*  fac = fln/(2*Ceil (Div/2))     */
+                	        	/*  Tac = 2*Ceil (Div/2)*Tln       */
+#define LCCR3_API	Fld (4, 16)	/* AC bias Pin transitions per     */
+                	        	/* Interrupt                       */
+#define LCCR3_ACBsCntOff        	/*  AC Bias clock transition Count */ \
+                	        	/*  Off                            */ \
+                	(0 << FShft (LCCR3_API))
+#define LCCR3_ACBsCnt(Trans)    	/*  AC Bias clock transition Count */ \
+                	        	/*  [1..15]                        */ \
+                	((Trans) << FShft (LCCR3_API))
+#define LCCR3_VSP	0x00100000	/* Vertical Synchronization pulse  */
+                	        	/* Polarity (L_FCLK)               */
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  Vertical Synchronization pulse */
+                	        	/*  active High                    */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  Vertical Synchronization pulse */
+                	        	/*  active Low                     */
+#define LCCR3_HSP	0x00200000	/* Horizontal Synchronization      */
+                	        	/* pulse Polarity (L_LCLK)         */
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  Horizontal Synchronization     */
+                	        	/*  pulse active High              */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  Horizontal Synchronization     */
+                	        	/*  pulse active Low               */
+#define LCCR3_PCP	0x00400000	/* Pixel Clock Polarity (L_PCLK)   */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge        */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge       */
+#define LCCR3_OEP	0x00800000	/* Output Enable Polarity (L_BIAS, */
+                	        	/* active display mode)            */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High      */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low       */
+
+#ifndef __ASSEMBLY__
+extern unsigned int processor_id;
+#endif
+
+#define CPU_REVISION	(processor_id & 15)
+#define CPU_SA1110_A0	(0)
+#define CPU_SA1110_B0	(4)
+#define CPU_SA1110_B1	(5)
+#define CPU_SA1110_B2	(6)
+#define CPU_SA1110_B4	(8)
+
+#define CPU_SA1100_ID	(0x4401a110)
+#define CPU_SA1100_MASK	(0xfffffff0)
+#define CPU_SA1110_ID	(0x6901b110)
+#define CPU_SA1110_MASK	(0xfffffff0)
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
new file mode 100644
index 00000000000..5d2ad7db991
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1101.h
@@ -0,0 +1,925 @@
+/*
+ * SA-1101.h
+ *
+ * Copyright (c) Peter Danielsson 1999
+ *
+ * Definition of constants related to the sa1101
+ * support chip for the sa1100
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1101.h
+#endif
+
+#ifndef SA1101_BASE
+#error You must define SA-1101 physical base address
+#endif
+
+#ifndef LANGUAGE
+# ifdef __ASSEMBLY__
+#  define LANGUAGE Assembly
+# else
+#  define LANGUAGE C
+# endif
+#endif
+
+/*
+ * We have mapped the sa1101 depending on the value of SA1101_BASE.
+ * It then appears from 0xf4000000.
+ */
+
+#define SA1101_p2v( x )         ((x) - SA1101_BASE + 0xf4000000)
+#define SA1101_v2p( x )         ((x) - 0xf4000000  + SA1101_BASE)
+
+#ifndef SA1101_p2v
+#define SA1101_p2v(PhAdd)  (PhAdd)
+#endif
+
+#include <mach/bitfield.h>
+
+#define C               0
+#define Assembly        1
+
+
+/*
+ * Memory map
+ */
+
+#define __SHMEM_CONTROL0	0x00000000
+#define __SYSTEM_CONTROL1	0x00000400
+#define __ARBITER		0x00020000
+#define __SYSTEM_CONTROL2	0x00040000
+#define __SYSTEM_CONTROL3	0x00060000
+#define __PARALLEL_PORT		0x00080000
+#define __VIDMEM_CONTROL	0x00100000
+#define __UPDATE_FIFO		0x00120000
+#define __SHMEM_CONTROL1	0x00140000
+#define __INTERRUPT_CONTROL	0x00160000
+#define __USB_CONTROL		0x00180000
+#define __TRACK_INTERFACE	0x001a0000
+#define __MOUSE_INTERFACE	0x001b0000
+#define __KEYPAD_INTERFACE	0x001c0000
+#define __PCMCIA_INTERFACE	0x001e0000
+#define	__VGA_CONTROL		0x00200000
+#define __GPIO_INTERFACE	0x00300000
+
+/*
+ * Macro that calculates real address for registers in the SA-1101
+ */
+
+#define _SA1101( x )    ((x) + SA1101_BASE)
+
+/*
+ * Interface and shared memory controller registers
+ *
+ * Registers
+ *	SKCR		SA-1101 control register (read/write)
+ *	SMCR		Shared Memory Controller Register
+ *	SNPR		Snoop Register
+ */
+
+#define _SKCR		_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
+#define _SMCR		_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
+#define _SNPR		_SA1101( 0x00140400 ) /* Snoop Reg. */
+
+#if LANGUAGE == C
+#define SKCR		(*((volatile Word *) SA1101_p2v (_SKCR)))
+#define SMCR		(*((volatile Word *) SA1101_p2v (_SMCR)))
+#define SNPR		(*((volatile Word *) SA1101_p2v (_SNPR)))
+
+#define SKCR_PLLEn	  0x0001	  /* Enable On-Chip PLL */
+#define SKCR_BCLKEn	  0x0002	  /* Enables BCLK */
+#define SKCR_Sleep	  0x0004	  /* Sleep Mode */
+#define SKCR_IRefEn	  0x0008	  /* DAC Iref input enable */
+#define SKCR_VCOON	  0x0010	  /* VCO bias */
+#define SKCR_ScanTestEn	  0x0020	  /* Enables scan test */
+#define SKCR_ClockTestEn  0x0040	  /* Enables clock test */
+
+#define SMCR_DCAC	  Fld(2,0)	  /* Number of column address bits */
+#define SMCR_DRAC	  Fld(2,2)	  /* Number of row address bits */
+#define SMCR_ArbiterBias  0x0008	  /* favor video or USB */
+#define SMCR_TopVidMem	  Fld(4,5)	  /* Top 4 bits of vidmem addr. */
+
+#define SMCR_ColAdrBits( x )		  /* col. addr bits 8..11 */ \
+	(( (x) - 8 ) << FShft (SMCR_DCAC))
+#define SMCR_RowAdrBits( x )		  /* row addr bits 9..12 */\
+	(( (x) - 9 ) << FShft (SMCR_DRAC))
+
+#define SNPR_VFBstart	  Fld(12,0)	/* Video frame buffer addr */
+#define SNPR_VFBsize	  Fld(11,12)	/* Video frame buffer size */
+#define SNPR_WholeBank	  (1 << 23)	/* Whole bank bit */
+#define SNPR_BankSelect	  Fld(2,27)	/* Bank select */
+#define SNPR_SnoopEn	  (1 << 31)	/* Enable snoop operation */
+
+#define SNPR_Set_VFBsize( x )   /* set frame buffer size (in kb) */ \
+	( (x) << FShft (SNPR_VFBsize))
+#define SNPR_Select_Bank(x)     /* select bank 0 or 1 */  \
+	(( (x) + 1 ) << FShft (SNPR_BankSelect ))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Video Memory Controller
+ *
+ * Registers
+ *    VMCCR	Configuration register
+ *    VMCAR	VMC address register
+ *    VMCDR	VMC data register
+ *
+ */
+
+#define _VMCCR		_SA1101( 0x00100000 )	/* Configuration register */
+#define _VMCAR		_SA1101( 0x00101000 )	/* VMC address register */
+#define _VMCDR		_SA1101( 0x00101400 )	/* VMC data register */
+
+#if LANGUAGE == C
+#define VMCCR		(*((volatile Word *) SA1101_p2v (_VMCCR)))
+#define VMCAR		(*((volatile Word *) SA1101_p2v (_VMCAR)))
+#define VMCDR		(*((volatile Word *) SA1101_p2v (_VMCDR)))
+
+#define VMCCR_RefreshEn	    0x0000	  /* Enable memory refresh */
+#define VMCCR_Config	    0x0001	  /* DRAM size */
+#define VMCCR_RefPeriod	    Fld(2,3)	  /* Refresh period */
+#define VMCCR_StaleDataWait Fld(4,5)	  /* Stale FIFO data timeout counter */
+#define VMCCR_SleepState    (1<<9)	  /* State of interface pins in sleep*/
+#define VMCCR_RefTest	    (1<<10)	  /* refresh test */
+#define VMCCR_RefLow	    Fld(6,11)	  /* refresh low counter */
+#define VMCCR_RefHigh	    Fld(7,17)	  /* refresh high counter */
+#define VMCCR_SDTCTest	    Fld(7,24)	  /* stale data timeout counter */
+#define VMCCR_ForceSelfRef  (1<<31)	  /* Force self refresh */
+
+#endif LANGUAGE == C
+
+
+/* Update FIFO
+ *
+ * Registers
+ *    UFCR	Update FIFO Control Register
+ *    UFSR	Update FIFO Status Register
+ *    UFLVLR	update FIFO level register
+ *    UFDR	update FIFO data register
+ */
+
+#define _UFCR	_SA1101(0x00120000)   /* Update FIFO Control Reg. */
+#define _UFSR	_SA1101(0x00120400)   /* Update FIFO Status Reg. */	
+#define _UFLVLR	_SA1101(0x00120800)   /* Update FIFO level reg. */
+#define _UFDR	_SA1101(0x00120c00)   /* Update FIFO data reg. */
+
+#if LANGUAGE == C
+
+#define UFCR 	(*((volatile Word *) SA1101_p2v (_UFCR)))
+#define UFSR	(*((volatile Word *) SA1101_p2v (_UFSR)))
+#define UFLVLR	(*((volatile Word *) SA1101_p2v (_UFLVLR))) 
+#define UFDR	(*((volatile Word *) SA1101_p2v (_UFDR)))
+
+
+#define UFCR_FifoThreshhold	Fld(7,0)	/* Level for FifoGTn flag */
+
+#define UFSR_FifoGTnFlag	0x01		/* FifoGTn flag */#define UFSR_FifoEmpty		0x80		/* FIFO is empty */
+
+#endif /* LANGUAGE == C */
+
+/* System Controller
+ *
+ * Registers
+ *    SKPCR	Power Control Register
+ *    SKCDR	Clock Divider Register
+ *    DACDR1	DAC1 Data register
+ *    DACDR2	DAC2 Data register
+ */
+
+#define _SKPCR		_SA1101(0x00000400)
+#define _SKCDR		_SA1101(0x00040000)
+#define _DACDR1		_SA1101(0x00060000)
+#define _DACDR2		_SA1101(0x00060400)
+
+#if LANGUAGE == C
+#define SKPCR 	(*((volatile Word *) SA1101_p2v (_SKPCR)))
+#define SKCDR	(*((volatile Word *) SA1101_p2v (_SKCDR)))
+#define DACDR1	(*((volatile Word *) SA1101_p2v (_DACDR1)))
+#define DACDR2	(*((volatile Word *) SA1101_p2v (_DACDR2)))
+
+#define SKPCR_UCLKEn	     0x01    /* USB Enable */
+#define SKPCR_PCLKEn	     0x02    /* PS/2 Enable */
+#define SKPCR_ICLKEn	     0x04    /* Interrupt Controller Enable */
+#define SKPCR_VCLKEn	     0x08    /* Video Controller Enable */
+#define SKPCR_PICLKEn	     0x10    /* parallel port Enable */
+#define SKPCR_DCLKEn	     0x20    /* DACs Enable */
+#define SKPCR_nKPADEn	     0x40    /* Multiplexer */
+
+#define SKCDR_PLLMul	     Fld(7,0)	/* PLL Multiplier */
+#define SKCDR_VCLKEn	     Fld(2,7)	/* Video controller clock divider */
+#define SKDCR_BCLKEn	     (1<<9)	/* BCLK Divider */
+#define SKDCR_UTESTCLKEn     (1<<10)	/* Route USB clock during test mode */
+#define SKDCR_DivRValue	     Fld(6,11)	/* Input clock divider for PLL */
+#define SKDCR_DivNValue	     Fld(5,17)	/* Output clock divider for PLL */
+#define SKDCR_PLLRSH	     Fld(3,22)	/* PLL bandwidth control */
+#define SKDCR_ChargePump     (1<<25)	/* Charge pump control */
+#define SKDCR_ClkTestMode    (1<<26)	/* Clock output test mode */
+#define SKDCR_ClkTestEn	     (1<<27)	/* Test clock generator */
+#define SKDCR_ClkJitterCntl  Fld(3,28)	/* video clock jitter compensation */
+
+#define DACDR_DACCount	     Fld(8,0)	/* Count value */
+#define DACDR1_DACCount	     DACDR_DACCount
+#define DACDR2_DACCount	     DACDR_DACCount
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Parallel Port Interface
+ *
+ * Registers
+ *    IEEE_Config	IEEE mode selection and programmable attributes
+ *    IEEE_Control	Controls the states of IEEE port control outputs
+ *    IEEE_Data		Forward transfer data register
+ *    IEEE_Addr		Forward transfer address register
+ *    IEEE_Status	Port IO signal status register
+ *    IEEE_IntStatus	Port interrupts status register
+ *    IEEE_FifoLevels   Rx and Tx FIFO interrupt generation levels
+ *    IEEE_InitTime	Forward timeout counter initial value
+ *    IEEE_TimerStatus	Forward timeout counter current value
+ *    IEEE_FifoReset	Reset forward transfer FIFO
+ *    IEEE_ReloadValue	Counter reload value
+ *    IEEE_TestControl	Control testmode
+ *    IEEE_TestDataIn	Test data register
+ *    IEEE_TestDataInEn	Enable test data
+ *    IEEE_TestCtrlIn	Test control signals
+ *    IEEE_TestCtrlInEn	Enable test control signals
+ *    IEEE_TestDataStat	Current data bus value
+ *
+ */
+
+/*
+ * The control registers are defined as offsets from a base address 
+ */
+ 
+#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
+
+#define _IEEE_Config	    _IEEE( 0x0000 )
+#define _IEEE_Control	    _IEEE( 0x0400 )
+#define _IEEE_Data	    _IEEE( 0x4000 )
+#define _IEEE_Addr	    _IEEE( 0x0800 )
+#define _IEEE_Status	    _IEEE( 0x0c00 )
+#define _IEEE_IntStatus	    _IEEE( 0x1000 )
+#define _IEEE_FifoLevels    _IEEE( 0x1400 )
+#define _IEEE_InitTime	    _IEEE( 0x1800 )
+#define _IEEE_TimerStatus   _IEEE( 0x1c00 )
+#define _IEEE_FifoReset	    _IEEE( 0x2000 )
+#define _IEEE_ReloadValue   _IEEE( 0x3c00 )
+#define _IEEE_TestControl   _IEEE( 0x2400 )
+#define _IEEE_TestDataIn    _IEEE( 0x2800 )
+#define _IEEE_TestDataInEn  _IEEE( 0x2c00 )
+#define _IEEE_TestCtrlIn    _IEEE( 0x3000 )
+#define _IEEE_TestCtrlInEn  _IEEE( 0x3400 )
+#define _IEEE_TestDataStat  _IEEE( 0x3800 )
+ 
+
+#if LANGUAGE == C
+#define IEEE_Config	    (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
+#define IEEE_Control	    (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
+#define IEEE_Data	    (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
+#define IEEE_Addr	    (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
+#define IEEE_Status	    (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
+#define IEEE_IntStatus	    (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
+#define IEEE_FifoLevels	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
+#define IEEE_InitTime	    (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
+#define IEEE_TimerStatus    (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
+#define IEEE_FifoReset	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
+#define IEEE_ReloadValue    (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
+#define IEEE_TestControl    (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
+#define IEEE_TestDataIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
+#define IEEE_TestDataInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
+#define IEEE_TestCtrlIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
+#define IEEE_TestCtrlInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
+#define IEEE_TestDataStat   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
+
+
+#define IEEE_Config_M	    Fld(3,0)	 /* Mode select */
+#define IEEE_Config_D	    0x04	 /* FIFO access enable */
+#define IEEE_Config_B	    0x08	 /* 9-bit word enable */
+#define IEEE_Config_T	    0x10	 /* Data transfer enable */
+#define IEEE_Config_A	    0x20	 /* Data transfer direction */
+#define IEEE_Config_E	    0x40	 /* Timer enable */
+#define IEEE_Control_A	    0x08	 /* AutoFd output */
+#define IEEE_Control_E	    0x04	 /* Selectin output */
+#define IEEE_Control_T	    0x02	 /* Strobe output */
+#define IEEE_Control_I	    0x01	 /* Port init output */
+#define IEEE_Data_C	    (1<<31)	 /* Byte count */
+#define IEEE_Data_Db	    Fld(9,16)	 /* Data byte 2 */
+#define IEEE_Data_Da	    Fld(9,0)	 /* Data byte 1 */
+#define IEEE_Addr_A	    Fld(8,0)	 /* forward address transfer byte */
+#define IEEE_Status_A	    0x0100	 /* nAutoFd port output status */
+#define IEEE_Status_E	    0x0080	 /* nSelectIn port output status */
+#define IEEE_Status_T	    0x0040	 /* nStrobe port output status */
+#define IEEE_Status_I	    0x0020	 /* nInit port output status */
+#define IEEE_Status_B	    0x0010	 /* Busy port inout status */
+#define IEEE_Status_S	    0x0008	 /* Select port input status */
+#define IEEE_Status_K	    0x0004	 /* nAck port input status */
+#define IEEE_Status_F	    0x0002	 /* nFault port input status */
+#define IEEE_Status_R	    0x0001	 /* pError port input status */
+
+#define IEEE_IntStatus_IntReqDat	 0x0100
+#define IEEE_IntStatus_IntReqEmp	 0x0080
+#define IEEE_IntStatus_IntReqInt	 0x0040
+#define IEEE_IntStatus_IntReqRav	 0x0020
+#define IEEE_IntStatus_IntReqTim	 0x0010
+#define IEEE_IntStatus_RevAddrComp	 0x0008
+#define IEEE_IntStatus_RevDataComp	 0x0004
+#define IEEE_IntStatus_FwdAddrComp	 0x0002
+#define IEEE_IntStatus_FwdDataComp	 0x0001
+#define IEEE_FifoLevels_RevFifoLevel	 2
+#define IEEE_FifoLevels_FwdFifoLevel	 1
+#define IEEE_InitTime_TimValInit	 Fld(22,0)
+#define IEEE_TimerStatus_TimValStat	 Fld(22,0)
+#define IEEE_ReloadValue_Reload		 Fld(4,0)
+
+#define IEEE_TestControl_RegClk		 0x04
+#define IEEE_TestControl_ClockSelect	 Fld(2,1)
+#define IEEE_TestControl_TimerTestModeEn 0x01
+#define IEEE_TestCtrlIn_PError		 0x10
+#define IEEE_TestCtrlIn_nFault		 0x08
+#define IEEE_TestCtrlIn_nAck		 0x04
+#define IEEE_TestCtrlIn_PSel		 0x02
+#define IEEE_TestCtrlIn_Busy		 0x01
+
+#endif /* LANGUAGE == C */
+
+/*
+ * VGA Controller
+ *
+ * Registers
+ *    VideoControl	Video Control Register
+ *    VgaTiming0	VGA Timing Register 0
+ *    VgaTiming1	VGA Timing Register 1
+ *    VgaTiming2	VGA Timing Register 2
+ *    VgaTiming3	VGA Timing Register 3
+ *    VgaBorder		VGA Border Color Register
+ *    VgaDBAR		VGADMA Base Address Register
+ *    VgaDCAR		VGADMA Channel Current Address Register
+ *    VgaStatus		VGA Status Register
+ *    VgaInterruptMask	VGA Interrupt Mask Register
+ *    VgaPalette	VGA Palette Registers
+ *    DacControl	DAC Control Register
+ *    VgaTest		VGA Controller Test Register
+ */
+
+#define _VGA( x )	_SA1101( ( x ) + __VGA_CONTROL )
+
+#define _VideoControl	    _VGA( 0x0000 )
+#define _VgaTiming0	    _VGA( 0x0400 )
+#define _VgaTiming1	    _VGA( 0x0800 )
+#define _VgaTiming2	    _VGA( 0x0c00 )
+#define _VgaTiming3	    _VGA( 0x1000 )
+#define _VgaBorder	    _VGA( 0x1400 )
+#define _VgaDBAR	    _VGA( 0x1800 )
+#define _VgaDCAR	    _VGA( 0x1c00 )
+#define _VgaStatus	    _VGA( 0x2000 )
+#define _VgaInterruptMask   _VGA( 0x2400 )
+#define _VgaPalette	    _VGA( 0x40000 )
+#define _DacControl	    _VGA( 0x3000 )
+#define _VgaTest	    _VGA( 0x2c00 )
+
+#if (LANGUAGE == C)
+#define VideoControl   (*((volatile Word *) SA1101_p2v (_VideoControl)))
+#define VgaTiming0     (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
+#define VgaTiming1     (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
+#define VgaTiming2     (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
+#define VgaTiming3     (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
+#define VgaBorder      (*((volatile Word *) SA1101_p2v (_VgaBorder)))
+#define VgaDBAR	       (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
+#define VgaDCAR	       (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
+#define VgaStatus      (*((volatile Word *) SA1101_p2v (_VgaStatus)))
+#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
+#define VgaPalette     (*((volatile Word *) SA1101_p2v (_VgaPalette)))
+#define DacControl     (*((volatile Word *) SA1101_p2v (_DacControl)))
+#define VgaTest        (*((volatile Word *) SA1101_p2v (_VgaTest)))
+
+#define VideoControl_VgaEn    0x00000000
+#define VideoControl_BGR      0x00000001
+#define VideoControl_VCompVal Fld(2,2)
+#define VideoControl_VgaReq   Fld(4,4)
+#define VideoControl_VBurstL  Fld(4,8)
+#define VideoControl_VMode    (1<<12)
+#define VideoControl_PalRead  (1<<13)
+
+#define VgaTiming0_PPL	      Fld(6,2)
+#define VgaTiming0_HSW	      Fld(8,8)
+#define VgaTiming0_HFP	      Fld(8,16)
+#define VgaTiming0_HBP	      Fld(8,24)
+
+#define VgaTiming1_LPS	      Fld(10,0)
+#define VgaTiming1_VSW	      Fld(6,10)
+#define VgaTiming1_VFP	      Fld(8,16)
+#define VgaTiming1_VBP	      Fld(8,24)
+
+#define VgaTiming2_IVS	      0x01
+#define VgaTiming2_IHS	      0x02
+#define VgaTiming2_CVS	      0x04
+#define VgaTiming2_CHS	      0x08
+
+#define VgaTiming3_HBS	      Fld(8,0)
+#define VgaTiming3_HBE	      Fld(8,8)
+#define VgaTiming3_VBS	      Fld(8,16)
+#define VgaTiming3_VBE	      Fld(8,24)
+
+#define VgaBorder_BCOL	      Fld(24,0)
+
+#define VgaStatus_VFUF	      0x01
+#define VgaStatus_VNext	      0x02
+#define VgaStatus_VComp	      0x04
+
+#define VgaInterruptMask_VFUFMask   0x00
+#define VgaInterruptMask_VNextMask  0x01
+#define VgaInterruptMask_VCompMask  0x02
+
+#define VgaPalette_R	      Fld(8,0)
+#define VgaPalette_G	      Fld(8,8)
+#define VgaPalette_B	      Fld(8,16)
+
+#define DacControl_DACON      0x0001
+#define DacControl_COMPON     0x0002
+#define DacControl_PEDON      0x0004
+#define DacControl_RTrim      Fld(5,4)
+#define DacControl_GTrim      Fld(5,9)
+#define DacControl_BTrim      Fld(5,14)
+
+#define VgaTest_TDAC	      0x00
+#define VgaTest_Datatest      Fld(4,1)
+#define VgaTest_DACTESTDAC    0x10
+#define VgaTest_DACTESTOUT    Fld(3,5)
+
+#endif /* LANGUAGE == C */
+
+/*
+ * USB Host Interface Controller
+ *
+ * Registers
+ *    Revision
+ *    Control
+ *    CommandStatus
+ *    InterruptStatus
+ *    InterruptEnable
+ *    HCCA
+ *    PeriodCurrentED
+ *    ControlHeadED
+ *    BulkHeadED
+ *    BulkCurrentED
+ *    DoneHead
+ *    FmInterval
+ *    FmRemaining
+ *    FmNumber
+ *    PeriodicStart
+ *    LSThreshold
+ *    RhDescriptorA
+ *    RhDescriptorB
+ *    RhStatus
+ *    RhPortStatus
+ *    USBStatus
+ *    USBReset
+ *    USTAR
+ *    USWER
+ *    USRFR
+ *    USNFR
+ *    USTCSR
+ *    USSR
+ *    
+ */
+
+#define _USB( x )	_SA1101( ( x ) + __USB_CONTROL )
+
+
+#define _Revision	  _USB( 0x0000 )
+#define _Control	  _USB( 0x0888 )
+#define _CommandStatus	  _USB( 0x0c00 )
+#define _InterruptStatus  _USB( 0x1000 )
+#define _InterruptEnable  _USB( 0x1400 )
+#define _HCCA		  _USB( 0x1800 )
+#define _PeriodCurrentED  _USB( 0x1c00 )
+#define _ControlHeadED	  _USB( 0x2000 )
+#define _BulkHeadED	  _USB( 0x2800 )
+#define _BulkCurrentED	  _USB( 0x2c00 )
+#define _DoneHead	  _USB( 0x3000 )
+#define _FmInterval	  _USB( 0x3400 )
+#define _FmRemaining	  _USB( 0x3800 )
+#define _FmNumber	  _USB( 0x3c00 )
+#define _PeriodicStart	  _USB( 0x4000 )
+#define _LSThreshold	  _USB( 0x4400 )
+#define _RhDescriptorA	  _USB( 0x4800 )
+#define _RhDescriptorB	  _USB( 0x4c00 )
+#define _RhStatus	  _USB( 0x5000 )
+#define _RhPortStatus	  _USB( 0x5400 )
+#define _USBStatus	  _USB( 0x11800 )
+#define _USBReset	  _USB( 0x11c00 )
+
+#define _USTAR		  _USB( 0x10400 )
+#define _USWER		  _USB( 0x10800 )
+#define _USRFR		  _USB( 0x10c00 )
+#define _USNFR		  _USB( 0x11000 )
+#define _USTCSR		  _USB( 0x11400 )
+#define _USSR		  _USB( 0x11800 )
+
+
+#if (LANGUAGE == C)
+
+#define Revision	(*((volatile Word *) SA1101_p2v (_Revision)))
+#define Control		(*((volatile Word *) SA1101_p2v (_Control)))
+#define CommandStatus	(*((volatile Word *) SA1101_p2v (_CommandStatus)))
+#define InterruptStatus	(*((volatile Word *) SA1101_p2v (_InterruptStatus)))
+#define InterruptEnable	(*((volatile Word *) SA1101_p2v (_InterruptEnable)))
+#define HCCA		(*((volatile Word *) SA1101_p2v (_HCCA)))
+#define PeriodCurrentED	(*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
+#define ControlHeadED	(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
+#define BulkHeadED	(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
+#define BulkCurrentED	(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
+#define DoneHead	(*((volatile Word *) SA1101_p2v (_DoneHead)))
+#define FmInterval	(*((volatile Word *) SA1101_p2v (_FmInterval)))
+#define FmRemaining	(*((volatile Word *) SA1101_p2v (_FmRemaining)))
+#define FmNumber	(*((volatile Word *) SA1101_p2v (_FmNumber)))
+#define PeriodicStart	(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
+#define LSThreshold	(*((volatile Word *) SA1101_p2v (_LSThreshold)))
+#define RhDescriptorA	(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
+#define RhDescriptorB	(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
+#define RhStatus	(*((volatile Word *) SA1101_p2v (_RhStatus)))
+#define RhPortStatus	(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
+#define USBStatus	(*((volatile Word *) SA1101_p2v (_USBStatus)))
+#define USBReset	(*((volatile Word *) SA1101_p2v (_USBReset)))
+#define USTAR		(*((volatile Word *) SA1101_p2v (_USTAR)))
+#define USWER		(*((volatile Word *) SA1101_p2v (_USWER)))
+#define USRFR		(*((volatile Word *) SA1101_p2v (_USRFR)))
+#define USNFR		(*((volatile Word *) SA1101_p2v (_USNFR)))
+#define USTCSR		(*((volatile Word *) SA1101_p2v (_USTCSR)))
+#define USSR		(*((volatile Word *) SA1101_p2v (_USSR)))
+
+
+#define USBStatus_IrqHciRmtWkp	     (1<<7)
+#define USBStatus_IrqHciBuffAcc	     (1<<8)
+#define USBStatus_nIrqHciM	     (1<<9)
+#define USBStatus_nHciMFClr	     (1<<10)
+
+#define USBReset_ForceIfReset	     0x01
+#define USBReset_ForceHcReset	     0x02
+#define USBReset_ClkGenReset	     0x04
+
+#define USTCR_RdBstCntrl	     Fld(3,0)
+#define USTCR_ByteEnable	     Fld(4,3)
+#define USTCR_WriteEn		     (1<<7)
+#define USTCR_FifoCir		     (1<<8)
+#define USTCR_TestXferSel	     (1<<9)
+#define USTCR_FifoCirAtEnd	     (1<<10)
+#define USTCR_nSimScaleDownClk	     (1<<11)
+
+#define USSR_nAppMDEmpty	     0x01
+#define USSR_nAppMDFirst	     0x02
+#define USSR_nAppMDLast		     0x04
+#define USSR_nAppMDFull		     0x08
+#define USSR_nAppMAFull		     0x10
+#define USSR_XferReq		     0x20
+#define USSR_XferEnd		     0x40
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ *    INTTEST0		Test register 0
+ *    INTTEST1		Test register 1
+ *    INTENABLE0	Interrupt Enable register 0
+ *    INTENABLE1	Interrupt Enable register 1
+ *    INTPOL0		Interrupt Polarity selection 0
+ *    INTPOL1		Interrupt Polarity selection 1
+ *    INTTSTSEL		Interrupt source selection
+ *    INTSTATCLR0	Interrupt Status 0
+ *    INTSTATCLR1	Interrupt Status 1
+ *    INTSET0		Interrupt Set 0
+ *    INTSET1		Interrupt Set 1
+ */
+
+#define _INT( x )	_SA1101( ( x ) + __INTERRUPT_CONTROL)
+
+#define _INTTEST0	_INT( 0x1000 )
+#define _INTTEST1	_INT( 0x1400 )
+#define _INTENABLE0	_INT( 0x2000 )
+#define _INTENABLE1	_INT( 0x2400 )
+#define _INTPOL0	_INT( 0x3000 )
+#define _INTPOL1	_INT( 0x3400 )
+#define _INTTSTSEL     	_INT( 0x5000 )
+#define _INTSTATCLR0	_INT( 0x6000 )
+#define _INTSTATCLR1	_INT( 0x6400 )
+#define _INTSET0	_INT( 0x7000 )
+#define _INTSET1	_INT( 0x7400 )
+
+#if ( LANGUAGE == C )
+#define INTTEST0	(*((volatile Word *) SA1101_p2v (_INTTEST0)))
+#define INTTEST1	(*((volatile Word *) SA1101_p2v (_INTTEST1)))
+#define INTENABLE0	(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
+#define INTENABLE1	(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
+#define INTPOL0		(*((volatile Word *) SA1101_p2v (_INTPOL0)))
+#define INTPOL1		(*((volatile Word *) SA1101_p2v (_INTPOL1)))
+#define INTTSTSEL	(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
+#define INTSTATCLR0	(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
+#define INTSTATCLR1	(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
+#define INTSET0		(*((volatile Word *) SA1101_p2v (_INTSET0)))
+#define INTSET1		(*((volatile Word *) SA1101_p2v (_INTSET1)))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers   (prefix kbd applies to trackpad interface, mse to mouse)
+ *    KBDCR		Control Register
+ *    KBDSTAT		Status Register
+ *    KBDDATA		Transmit/Receive Data register
+ *    KBDCLKDIV		Clock Division Register
+ *    KBDPRECNT		Clock Precount Register
+ *    KBDTEST1		Test register 1
+ *    KBDTEST2		Test register 2
+ *    KBDTEST3		Test register 3
+ *    KBDTEST4		Test register 4
+ *    MSECR	
+ *    MSESTAT
+ *    MSEDATA
+ *    MSECLKDIV
+ *    MSEPRECNT
+ *    MSETEST1
+ *    MSETEST2
+ *    MSETEST3
+ *    MSETEST4
+ *     
+ */
+
+#define _KBD( x )	_SA1101( ( x ) + __TRACK_INTERFACE )
+#define _MSE( x )	_SA1101( ( x ) + __MOUSE_INTERFACE )
+
+#define _KBDCR		_KBD( 0x0000 )
+#define _KBDSTAT	_KBD( 0x0400 )
+#define _KBDDATA	_KBD( 0x0800 )
+#define _KBDCLKDIV	_KBD( 0x0c00 )
+#define _KBDPRECNT	_KBD( 0x1000 )
+#define	_KBDTEST1	_KBD( 0x2000 )
+#define _KBDTEST2	_KBD( 0x2400 )
+#define _KBDTEST3	_KBD( 0x2800 )
+#define _KBDTEST4	_KBD( 0x2c00 )
+#define _MSECR		_MSE( 0x0000 )
+#define _MSESTAT	_MSE( 0x0400 )
+#define _MSEDATA	_MSE( 0x0800 )
+#define _MSECLKDIV	_MSE( 0x0c00 )
+#define _MSEPRECNT	_MSE( 0x1000 )
+#define	_MSETEST1	_MSE( 0x2000 )
+#define _MSETEST2	_MSE( 0x2400 )
+#define _MSETEST3	_MSE( 0x2800 )
+#define _MSETEST4	_MSE( 0x2c00 )
+
+#if ( LANGUAGE == C )
+
+#define KBDCR	    (*((volatile Word *) SA1101_p2v (_KBDCR)))
+#define KBDSTAT	    (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
+#define KBDDATA	    (*((volatile Word *) SA1101_p2v (_KBDDATA)))
+#define KBDCLKDIV   (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
+#define KBDPRECNT   (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
+#define KBDTEST1    (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
+#define KBDTEST2    (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
+#define KBDTEST3    (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
+#define KBDTEST4    (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
+#define MSECR	    (*((volatile Word *) SA1101_p2v (_MSECR)))
+#define MSESTAT	    (*((volatile Word *) SA1101_p2v (_MSESTAT)))
+#define MSEDATA	    (*((volatile Word *) SA1101_p2v (_MSEDATA)))
+#define MSECLKDIV   (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
+#define MSEPRECNT   (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
+#define MSETEST1    (*((volatile Word *) SA1101_p2v (_MSETEST1)))
+#define MSETEST2    (*((volatile Word *) SA1101_p2v (_MSETEST2)))
+#define MSETEST3    (*((volatile Word *) SA1101_p2v (_MSETEST3)))
+#define MSETEST4    (*((volatile Word *) SA1101_p2v (_MSETEST4)))
+
+
+#define KBDCR_ENA		 0x08
+#define KBDCR_FKD		 0x02
+#define KBDCR_FKC		 0x01
+
+#define KBDSTAT_TXE		 0x80
+#define KBDSTAT_TXB		 0x40
+#define KBDSTAT_RXF		 0x20
+#define KBDSTAT_RXB		 0x10
+#define KBDSTAT_ENA		 0x08
+#define KBDSTAT_RXP		 0x04
+#define KBDSTAT_KBD		 0x02
+#define KBDSTAT_KBC		 0x01
+
+#define KBDCLKDIV_DivVal	 Fld(4,0)
+
+#define MSECR_ENA		 0x08
+#define MSECR_FKD		 0x02
+#define MSECR_FKC		 0x01
+
+#define MSESTAT_TXE		 0x80
+#define MSESTAT_TXB		 0x40
+#define MSESTAT_RXF		 0x20
+#define MSESTAT_RXB		 0x10
+#define MSESTAT_ENA		 0x08
+#define MSESTAT_RXP		 0x04	
+#define MSESTAT_MSD		 0x02
+#define MSESTAT_MSC		 0x01
+
+#define MSECLKDIV_DivVal	 Fld(4,0)
+
+#define KBDTEST1_CD		 0x80
+#define KBDTEST1_RC1		 0x40
+#define KBDTEST1_MC		 0x20
+#define KBDTEST1_C		 Fld(2,3)
+#define KBDTEST1_T2		 0x40
+#define KBDTEST1_T1		 0x20
+#define KBDTEST1_T0		 0x10
+#define KBDTEST2_TICBnRES	 0x08
+#define KBDTEST2_RKC		 0x04
+#define KBDTEST2_RKD		 0x02
+#define KBDTEST2_SEL		 0x01
+#define KBDTEST3_ms_16		 0x80
+#define KBDTEST3_us_64		 0x40
+#define KBDTEST3_us_16		 0x20
+#define KBDTEST3_DIV8		 0x10
+#define KBDTEST3_DIn		 0x08
+#define KBDTEST3_CIn		 0x04
+#define KBDTEST3_KD		 0x02
+#define KBDTEST3_KC		 0x01
+#define KBDTEST4_BC12		 0x80
+#define KBDTEST4_BC11		 0x40
+#define KBDTEST4_TRES		 0x20
+#define KBDTEST4_CLKOE		 0x10
+#define KBDTEST4_CRES		 0x08
+#define KBDTEST4_RXB		 0x04
+#define KBDTEST4_TXB		 0x02
+#define KBDTEST4_SRX		 0x01
+
+#define MSETEST1_CD		 0x80
+#define MSETEST1_RC1		 0x40
+#define MSETEST1_MC		 0x20
+#define MSETEST1_C		 Fld(2,3)
+#define MSETEST1_T2		 0x40
+#define MSETEST1_T1		 0x20
+#define MSETEST1_T0		 0x10
+#define MSETEST2_TICBnRES	 0x08
+#define MSETEST2_RKC		 0x04
+#define MSETEST2_RKD		 0x02
+#define MSETEST2_SEL		 0x01
+#define MSETEST3_ms_16		 0x80
+#define MSETEST3_us_64		 0x40
+#define MSETEST3_us_16		 0x20
+#define MSETEST3_DIV8		 0x10
+#define MSETEST3_DIn		 0x08
+#define MSETEST3_CIn		 0x04
+#define MSETEST3_KD		 0x02
+#define MSETEST3_KC		 0x01
+#define MSETEST4_BC12		 0x80
+#define MSETEST4_BC11		 0x40
+#define MSETEST4_TRES		 0x20
+#define MSETEST4_CLKOE		 0x10
+#define MSETEST4_CRES		 0x08
+#define MSETEST4_RXB		 0x04
+#define MSETEST4_TXB		 0x02
+#define MSETEST4_SRX		 0x01
+
+#endif  /* LANGUAGE == C */
+
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ *    PADWR	Port A Data Write Register
+ *    PBDWR	Port B Data Write Register
+ *    PADRR	Port A Data Read Register
+ *    PBDRR	Port B Data Read Register
+ *    PADDR	Port A Data Direction Register
+ *    PBDDR	Port B Data Direction Register
+ *    PASSR	Port A Sleep State Register
+ *    PBSSR	Port B Sleep State Register
+ *
+ */
+
+#define _PIO( x )      _SA1101( ( x ) + __GPIO_INTERFACE )
+
+#define _PADWR	       _PIO( 0x0000 )
+#define _PBDWR	       _PIO( 0x0400 )
+#define _PADRR	       _PIO( 0x0000 )
+#define _PBDRR	       _PIO( 0x0400 )
+#define _PADDR	       _PIO( 0x0800 )
+#define _PBDDR	       _PIO( 0x0c00 )
+#define _PASSR	       _PIO( 0x1000 )
+#define _PBSSR	       _PIO( 0x1400 )
+
+
+#if ( LANGUAGE == C )
+
+
+#define PADWR	    (*((volatile Word *) SA1101_p2v (_PADWR)))
+#define PBDWR	    (*((volatile Word *) SA1101_p2v (_PBDWR)))
+#define PADRR	    (*((volatile Word *) SA1101_p2v (_PADRR)))
+#define PBDRR	    (*((volatile Word *) SA1101_p2v (_PBDRR)))
+#define PADDR	    (*((volatile Word *) SA1101_p2v (_PADDR)))
+#define PBDDR	    (*((volatile Word *) SA1101_p2v (_PBDDR)))
+#define PASSR	    (*((volatile Word *) SA1101_p2v (_PASSR)))
+#define PBSSR	    (*((volatile Word *) SA1101_p2v (_PBSSR)))
+
+#endif
+
+
+
+/*
+ * Keypad Interface
+ *
+ * Registers
+ *    PXDWR
+ *    PXDRR
+ *    PYDWR
+ *    PYDRR
+ *
+ */
+
+#define _KEYPAD( x )	_SA1101( ( x ) + __KEYPAD_INTERFACE ) 
+
+#define _PXDWR	   _KEYPAD( 0x0000 )
+#define _PXDRR	   _KEYPAD( 0x0000 )
+#define _PYDWR	   _KEYPAD( 0x0400 )
+#define _PYDRR	   _KEYPAD( 0x0400 )
+
+#if ( LANGUAGE == C )
+
+
+#define PXDWR	    (*((volatile Word *) SA1101_p2v (_PXDWR)))
+#define PXDRR	    (*((volatile Word *) SA1101_p2v (_PXDRR)))
+#define PYDWR	    (*((volatile Word *) SA1101_p2v (_PYDWR)))
+#define PYDRR	    (*((volatile Word *) SA1101_p2v (_PYDRR)))
+
+#endif
+
+
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ *    PCSR	Status Register
+ *    PCCR	Control Register
+ *    PCSSR	Sleep State Register
+ *
+ */
+
+#define _CARD( x )	_SA1101( ( x ) + __PCMCIA_INTERFACE )
+
+#define _PCSR	   _CARD( 0x0000 )
+#define _PCCR	   _CARD( 0x0400 )
+#define _PCSSR	   _CARD( 0x0800 )
+
+#if ( LANGUAGE == C )
+#define PCSR    (*((volatile Word *) SA1101_p2v (_PCSR)))
+#define PCCR	(*((volatile Word *) SA1101_p2v (_PCCR)))
+#define PCSSR	(*((volatile Word *) SA1101_p2v (_PCSSR)))
+
+#define PCSR_S0_ready		0x0001
+#define PCSR_S1_ready		0x0002
+#define PCSR_S0_detected	0x0004
+#define PCSR_S1_detected	0x0008
+#define PCSR_S0_VS1		0x0010
+#define PCSR_S0_VS2		0x0020
+#define PCSR_S1_VS1		0x0040
+#define PCSR_S1_VS2		0x0080
+#define PCSR_S0_WP		0x0100
+#define PCSR_S1_WP		0x0200
+#define PCSR_S0_BVD1_nSTSCHG	0x0400
+#define PCSR_S0_BVD2_nSPKR	0x0800
+#define PCSR_S1_BVD1_nSTSCHG	0x1000
+#define PCSR_S1_BVD2_nSPKR	0x2000
+
+#define PCCR_S0_VPP0		0x0001
+#define PCCR_S0_VPP1		0x0002
+#define PCCR_S0_VCC0		0x0004
+#define PCCR_S0_VCC1		0x0008
+#define PCCR_S1_VPP0		0x0010
+#define PCCR_S1_VPP1		0x0020
+#define PCCR_S1_VCC0		0x0040
+#define PCCR_S1_VCC1		0x0080
+#define PCCR_S0_reset		0x0100
+#define PCCR_S1_reset		0x0200
+#define PCCR_S0_float		0x0400
+#define PCCR_S1_float		0x0800
+
+#define PCSSR_S0_VCC0		0x0001
+#define PCSSR_S0_VCC1		0x0002
+#define PCSSR_S0_VPP0		0x0004
+#define PCSSR_S0_VPP1		0x0008
+#define PCSSR_S0_control	0x0010
+#define PCSSR_S1_VCC0		0x0020
+#define PCSSR_S1_VCC1		0x0040
+#define PCSSR_S1_VPP0		0x0080
+#define PCSSR_S1_VPP1		0x0100
+#define PCSSR_S1_control	0x0200
+
+#endif
+
+#undef C
+#undef Assembly
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h
new file mode 100644
index 00000000000..c38f60915cb
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1111.h
@@ -0,0 +1,5 @@
+/*
+ * Moved to new location
+ */
+#warning using old SA-1111.h - update to <asm/hardware/sa1111.h>
+#include <asm/hardware/sa1111.h>
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
new file mode 100644
index 00000000000..3959b20d5d1
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/assabet.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_ASSABET_H
+#define __ASM_ARCH_ASSABET_H
+
+
+/* System Configuration Register flags */
+
+#define ASSABET_SCR_SDRAM_LOW	(1<<2)	/* SDRAM size (low bit) */
+#define ASSABET_SCR_SDRAM_HIGH	(1<<3)	/* SDRAM size (high bit) */
+#define ASSABET_SCR_FLASH_LOW	(1<<4)	/* Flash size (low bit) */
+#define ASSABET_SCR_FLASH_HIGH	(1<<5)	/* Flash size (high bit) */
+#define ASSABET_SCR_GFX		(1<<8)	/* Graphics Accelerator (0 = present) */
+#define ASSABET_SCR_SA1111	(1<<9)	/* Neponset (0 = present) */
+
+#define ASSABET_SCR_INIT	-1
+
+extern unsigned long SCR_value;
+
+#ifdef CONFIG_ASSABET_NEPONSET
+#define machine_has_neponset()  ((SCR_value & ASSABET_SCR_SA1111) == 0)
+#else
+#define machine_has_neponset()	(0)
+#endif
+
+/* Board Control Register */
+
+#define ASSABET_BCR_BASE  0xf1000000
+#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
+
+#define ASSABET_BCR_CF_PWR	(1<<0)	/* Compact Flash Power (1 = 3.3v, 0 = off) */
+#define ASSABET_BCR_CF_RST	(1<<1)	/* Compact Flash Reset (1 = power up reset) */
+#define ASSABET_BCR_GFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
+#define ASSABET_BCR_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define ASSABET_BCR_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
+#define ASSABET_BCR_IRDA_MD0	(1<<4)	/* Range/Power select */
+#define ASSABET_BCR_IRDA_MD1	(1<<5)	/* Range/Power select */
+#define ASSABET_BCR_STEREO_LB	(1<<6)	/* Stereo Loopback */
+#define ASSABET_BCR_CF_BUS_OFF	(1<<7)	/* Compact Flash bus (0 = on, 1 = off (float)) */
+#define ASSABET_BCR_AUDIO_ON	(1<<8)	/* Audio power on */
+#define ASSABET_BCR_LIGHT_ON	(1<<9)	/* Backlight */
+#define ASSABET_BCR_LCD_12RGB	(1<<10)	/* 0 = 16RGB, 1 = 12RGB */
+#define ASSABET_BCR_LCD_ON	(1<<11)	/* LCD power on */
+#define ASSABET_BCR_RS232EN	(1<<12)	/* RS232 transceiver enable */
+#define ASSABET_BCR_LED_RED	(1<<13)	/* D9 (0 = on, 1 = off) */
+#define ASSABET_BCR_LED_GREEN	(1<<14)	/* D8 (0 = on, 1 = off) */
+#define ASSABET_BCR_VIB_ON	(1<<15)	/* Vibration motor (quiet alert) */
+#define ASSABET_BCR_COM_DTR	(1<<16)	/* COMport Data Terminal Ready */
+#define ASSABET_BCR_COM_RTS	(1<<17)	/* COMport Request To Send */
+#define ASSABET_BCR_RAD_WU	(1<<18)	/* Radio wake up interrupt */
+#define ASSABET_BCR_SMB_EN	(1<<19)	/* System management bus enable */
+#define ASSABET_BCR_TV_IR_DEC	(1<<20)	/* TV IR Decode Enable (not implemented) */
+#define ASSABET_BCR_QMUTE	(1<<21)	/* Quick Mute */
+#define ASSABET_BCR_RAD_ON	(1<<22)	/* Radio Power On */
+#define ASSABET_BCR_SPK_OFF	(1<<23)	/* 1 = Speaker amplifier power off */
+
+#ifdef CONFIG_SA1100_ASSABET
+extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
+#else
+#define ASSABET_BCR_frob(x,y)	do { } while (0)
+#endif
+
+#define ASSABET_BCR_set(x)	ASSABET_BCR_frob((x), (x))
+#define ASSABET_BCR_clear(x)	ASSABET_BCR_frob((x), 0)
+
+#define ASSABET_BSR_BASE	0xf1000000
+#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
+
+#define ASSABET_BSR_RS232_VALID	(1 << 24)
+#define ASSABET_BSR_COM_DCD	(1 << 25)
+#define ASSABET_BSR_COM_CTS	(1 << 26)
+#define ASSABET_BSR_COM_DSR	(1 << 27)
+#define ASSABET_BSR_RAD_CTS	(1 << 28)
+#define ASSABET_BSR_RAD_DSR	(1 << 29)
+#define ASSABET_BSR_RAD_DCD	(1 << 30)
+#define ASSABET_BSR_RAD_RI	(1 << 31)
+
+
+/* GPIOs for which the generic definition doesn't say much */
+#define ASSABET_GPIO_RADIO_IRQ		GPIO_GPIO (14)	/* Radio interrupt request  */
+#define ASSABET_GPIO_PS_MODE_SYNC	GPIO_GPIO (16)	/* Power supply mode/sync   */
+#define ASSABET_GPIO_STEREO_64FS_CLK	GPIO_GPIO (19)	/* SSP UDA1341 clock input  */
+#define ASSABET_GPIO_CF_IRQ		GPIO_GPIO (21)	/* CF IRQ   */
+#define ASSABET_GPIO_CF_CD		GPIO_GPIO (22)	/* CF CD */
+#define ASSABET_GPIO_CF_BVD2		GPIO_GPIO (24)	/* CF BVD */
+#define ASSABET_GPIO_GFX_IRQ		GPIO_GPIO (24)	/* Graphics IRQ */
+#define ASSABET_GPIO_CF_BVD1		GPIO_GPIO (25)	/* CF BVD */
+#define ASSABET_GPIO_BATT_LOW		GPIO_GPIO (26)	/* Low battery */
+#define ASSABET_GPIO_RCLK		GPIO_GPIO (26)	/* CCLK/2  */
+
+#define ASSABET_IRQ_GPIO_CF_IRQ		IRQ_GPIO21
+#define ASSABET_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define ASSABET_IRQ_GPIO_CF_BVD2	IRQ_GPIO24
+#define ASSABET_IRQ_GPIO_CF_BVD1	IRQ_GPIO25
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
new file mode 100644
index 00000000000..44d2e1bfc04
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/badge4.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/badge4.h
+ *
+ *   Tim Connors <connors@hpl.hp.com>
+ *   Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <mach/hardware.h> instead"
+#endif
+
+#define BADGE4_SA1111_BASE		(0x48000000)
+
+/* GPIOs on the BadgePAD 4 */
+#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
+
+#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
+#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
+#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
+#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
+#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
+#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
+#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
+#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
+#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
+#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
+#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
+#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
+
+#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
+#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
+
+#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
+#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
+
+#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
+#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
+#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
+#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
+
+#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
+#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
+
+#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
+
+#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
+
+#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
+
+#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
+
+#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
+
+/* Interrupts on the BadgePAD 4 */
+#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
+
+
+/* PCM5ENV Usage tracking */
+
+#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
+#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
+#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
+#define BADGE4_5V_USB			(1<<2)
+#define BADGE4_5V_INITIALLY		(1<<3)
+
+#ifndef __ASSEMBLY__
+extern void badge4_set_5V(unsigned subsystem, int on);
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/bitfield.h b/arch/arm/mach-sa1100/include/mach/bitfield.h
new file mode 100644
index 00000000000..f1f0e3387d9
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ *	FILE    	bitfield.h
+ *
+ *	Version 	1.1
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	April 1998 (April 1997)
+ *	System  	Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size      	Size of the bit field, in number of bits.
+ *    Shft      	Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld       	Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize     	Size of the bit field, in number of bits.
+ *    FShft     	Shift value of the bit field with respect to bit 0.
+ *    FMsk      	Mask for the bit field.
+ *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
+ *    F1stBit   	First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value     	Bit-field value.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt    	Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+                	(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data      	Data containing the bit-field to be extracted.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr     	Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
new file mode 100644
index 00000000000..c3ac3d0f946
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/cerf.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/cerf.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Apr-2003 : Removed some old PDA crud [FB]
+ */
+#ifndef _INCLUDE_CERF_H_
+#define _INCLUDE_CERF_H_
+
+
+#define CERF_ETH_IO			0xf0000000
+#define CERF_ETH_IRQ IRQ_GPIO26
+
+#define CERF_GPIO_CF_BVD2		GPIO_GPIO (19)
+#define CERF_GPIO_CF_BVD1		GPIO_GPIO (20)
+#define CERF_GPIO_CF_RESET		GPIO_GPIO (21)
+#define CERF_GPIO_CF_IRQ		GPIO_GPIO (22)
+#define CERF_GPIO_CF_CD			GPIO_GPIO (23)
+
+#define CERF_IRQ_GPIO_CF_BVD2		IRQ_GPIO19
+#define CERF_IRQ_GPIO_CF_BVD1		IRQ_GPIO20
+#define CERF_IRQ_GPIO_CF_IRQ		IRQ_GPIO22
+#define CERF_IRQ_GPIO_CF_CD		IRQ_GPIO23
+
+#endif // _INCLUDE_CERF_H_
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
new file mode 100644
index 00000000000..69e962416e3
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+
+#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
+#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
+#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
+#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_LB_VOL_CHG )
+#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_CHARGE_ON )
+
+/* GPIOs for which the generic definition doesn't say much */
+
+#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
+#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
+#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
+#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
+#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
+#define COLLIE_GPIO_CO			GPIO_GPIO (20)
+#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
+#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
+#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
+#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
+#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
+#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
+
+#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
+#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
+#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
+#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
+#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
+#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
+#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
+#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
+#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
+#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
new file mode 100644
index 00000000000..1f0634d9270
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/mach-sa1100/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <mach/hardware.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		movne	\rx, #0xf8000000	@ virtual address
+
+		@ We probe for the active serial port here, coherently with
+		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
+		@ We assume r1 can be clobbered.
+
+		@ see if Ser3 is active
+		add	\rx, \rx, #0x00050000
+		ldr	r1, [\rx, #UTCR3]
+		tst	r1, #UTCR3_TXE
+
+		@ if Ser3 is inactive, then try Ser1
+		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if Ser1 is inactive, then try Ser2
+		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if all ports are inactive, then there is nothing we can do
+		moveq	pc, lr
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UTDR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TNF
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TBY
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
new file mode 100644
index 00000000000..dda1b351310
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/dma.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/dma.h
+ *
+ * Generic SA1100 DMA support
+ *
+ * Copyright (C) 2000 Nicolas Pitre
+ *
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "hardware.h"
+
+
+/*
+ * The SA1100 has six internal DMA channels.
+ */
+#define SA1100_DMA_CHANNELS	6
+
+/*
+ * Maximum physical DMA buffer size
+ */
+#define MAX_DMA_SIZE		0x1fff
+#define CUT_DMA_SIZE		0x1000
+
+/*
+ * All possible SA1100 devices a DMA channel can be attached to.
+ */
+typedef enum {
+	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
+	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
+	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
+	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
+	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
+	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
+	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
+	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
+	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
+	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
+	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
+	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
+	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
+	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
+	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
+	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
+	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
+	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
+} dma_device_t;
+
+typedef struct {
+	volatile u_long DDAR;
+	volatile u_long SetDCSR;
+	volatile u_long ClrDCSR;
+	volatile u_long RdDCSR;
+	volatile dma_addr_t DBSA;
+	volatile u_long DBTA;
+	volatile dma_addr_t DBSB;
+	volatile u_long DBTB;
+} dma_regs_t;
+
+typedef void (*dma_callback_t)(void *data);
+
+/*
+ * DMA function prototypes
+ */
+
+extern int sa1100_request_dma( dma_device_t device, const char *device_id,
+			       dma_callback_t callback, void *data,
+			       dma_regs_t **regs );
+extern void sa1100_free_dma( dma_regs_t *regs );
+extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
+extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
+extern void sa1100_reset_dma(dma_regs_t *regs);
+
+/**
+ * 	sa1100_stop_dma - stop DMA in progress
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This stops DMA without clearing buffer pointers. Unlike
+ * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
+ * 	or sa1100_get_dma_pos().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_resume_dma - resume DMA on a stopped channel
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This resumes DMA on a channel previously stopped with
+ * 	sa1100_stop_dma().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_clear_dma - clear DMA pointers
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This clear any DMA state so the DMA engine is ready to restart
+ * 	with new buffers through sa1100_start_dma(). Any buffers in flight
+ * 	are discarded.
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
new file mode 100644
index 00000000000..6aa13c46c5d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SA1100-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #0xfa000000		@ ICIP = 0xfa050000
+		add	\base, \base, #0x00050000
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base]		@ get irqs
+		ldr	\irqnr, [\base, #4]		@ ICMR = 0xfa050004
+		ands	\irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0
+		beq	1001f
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+		.endm
+
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
new file mode 100644
index 00000000000..582a0c92da5
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/gpio.h
+ *
+ * SA1100 GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_SA1100_GPIO_H
+#define __ASM_ARCH_SA1100_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		return GPLR & GPIO_GPIO(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		if (value)
+			GPSR = GPIO_GPIO(gpio);
+		else
+			GPCR = GPIO_GPIO(gpio);
+	else
+		__gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep	__gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	if (gpio < 11)
+		return IRQ_GPIO0 + gpio;
+	else
+		return IRQ_GPIO11 - 11 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	if (irq < IRQ_GPIO11_27)
+		return irq - IRQ_GPIO0;
+	else
+		return irq - IRQ_GPIO11 + 11;
+}
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
new file mode 100644
index 00000000000..3ca0ecf095e
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -0,0 +1,169 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_H_
+#define _INCLUDE_H3600_H_
+
+typedef int __bitwise pm_request_t;
+
+#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
+#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
+
+/* generalized support for H3xxx series Compaq Pocket PC's */
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS     (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS    SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS    SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT     0xf0000000
+#define H3600_BANK_2_VIRT    0xf1000000
+#define H3600_BANK_4_VIRT    0xf3800000
+
+/*
+   Machine-independent GPIO definitions
+   --- these are common across all current iPAQ platforms
+*/
+
+#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
+
+#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
+#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
+
+/* UDA1341 L3 Interface */
+#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
+#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
+#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
+
+#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
+#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
+#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
+
+#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
+#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
+#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
+#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
+
+#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
+#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
+#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
+#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
+#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
+#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
+#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
+#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
+
+
+#ifndef __ASSEMBLY__
+
+enum ipaq_egpio_type {
+	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
+	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
+	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
+	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
+	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
+	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
+	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
+	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
+	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
+	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
+	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
+	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
+	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
+};
+
+struct ipaq_model_ops {
+	const char     *generic_name;
+	void	      (*control)(enum ipaq_egpio_type, int);
+	unsigned long (*read)(void);
+	void	      (*blank_callback)(int blank);
+	int	      (*pm_callback)(int req);	    /* Primary model callback */
+	int	      (*pm_callback_aux)(int req);  /* Secondary callback (used by HAL modules) */
+};
+
+extern struct ipaq_model_ops ipaq_model_ops;
+
+static __inline__ const char * h3600_generic_name(void)
+{
+	return ipaq_model_ops.generic_name;
+}
+
+static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,level);
+}
+
+static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,0);
+}
+
+static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,1);
+}
+
+static __inline__ unsigned long read_h3600_egpio(void)
+{
+	if (ipaq_model_ops.read)
+		return ipaq_model_ops.read();
+	return 0;
+}
+
+static __inline__ int  h3600_register_blank_callback(void (*f)(int))
+{
+	ipaq_model_ops.blank_callback = f;
+	return 0;
+}
+
+static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
+{
+	ipaq_model_ops.blank_callback = NULL;
+}
+
+
+static __inline__ int  h3600_register_pm_callback(int (*f)(int))
+{
+	ipaq_model_ops.pm_callback_aux = f;
+	return 0;
+}
+
+static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
+{
+	ipaq_model_ops.pm_callback_aux = NULL;
+}
+
+static __inline__ int h3600_power_management(int req)
+{
+	if (ipaq_model_ops.pm_callback)
+		return ipaq_model_ops.pm_callback(req);
+	return 0;
+}
+
+#endif /* ASSEMBLY */
+
+#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
new file mode 100644
index 00000000000..62b0b787968
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -0,0 +1,540 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_GPIO_H_
+#define _INCLUDE_H3600_GPIO_H_
+
+/*
+ * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
+ * This file contains machine-specific definitions
+ */
+
+#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
+/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
+#define GPIO_H3100_BT_ON		GPIO_GPIO (2)
+#define GPIO_H3100_GPIO3		GPIO_GPIO (3)
+#define GPIO_H3100_QMUTE		GPIO_GPIO (4)
+#define GPIO_H3100_LCD_3V_ON		GPIO_GPIO (5)
+#define GPIO_H3100_AUD_ON		GPIO_GPIO (6)
+#define GPIO_H3100_AUD_PWR_ON		GPIO_GPIO (7)
+#define GPIO_H3100_IR_ON		GPIO_GPIO (8)
+#define GPIO_H3100_IR_FSEL		GPIO_GPIO (9)
+
+/* for H3600, audio sample rate clock generator */
+#define GPIO_H3600_CLK_SET0		GPIO_GPIO (12)
+#define GPIO_H3600_CLK_SET1		GPIO_GPIO (13)
+
+#define GPIO_H3600_ACTION_BUTTON	GPIO_GPIO (18)
+#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
+#define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
+#define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
+
+/* H3800 specific pins */
+#define GPIO_H3800_AC_IN                GPIO_GPIO (12)
+#define GPIO_H3800_COM_DSR              GPIO_GPIO (13)
+#define GPIO_H3800_MMC_INT              GPIO_GPIO (18)
+#define GPIO_H3800_NOPT_IND             GPIO_GPIO (20)   /* Almost exactly the same as GPIO_H3600_OPT_DET */
+#define GPIO_H3800_OPT_BAT_FAULT        GPIO_GPIO (22)
+#define GPIO_H3800_CLK_OUT              GPIO_GPIO (27)
+
+/****************************************************/
+
+#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
+#define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
+
+#define IRQ_GPIO_H3800_MMC_INT          IRQ_GPIO18
+#define IRQ_GPIO_H3800_NOPT_IND         IRQ_GPIO20 /* almost same as OPT_DET */
+
+/* H3100 / 3600 EGPIO pins */
+#define EGPIO_H3600_VPP_ON		(1 << 0)
+#define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
+#define EGPIO_H3600_OPT_RESET		(1 << 2)   /* reset the attached option pack.  active high. */
+#define EGPIO_H3600_CODEC_NRESET	(1 << 3)   /* reset the onboard UDA1341.  active low. */
+#define EGPIO_H3600_OPT_NVRAM_ON	(1 << 4)   /* apply power to optionpack nvram, active high. */
+#define EGPIO_H3600_OPT_ON		(1 << 5)   /* full power to option pack.  active high. */
+#define EGPIO_H3600_LCD_ON		(1 << 6)   /* enable 3.3V to LCD.  active high. */
+#define EGPIO_H3600_RS232_ON		(1 << 7)   /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define EGPIO_H3600_LCD_PCI		(1 << 8)   /* LCD control IC enable.  active high. */
+#define EGPIO_H3600_IR_ON		(1 << 9)   /* apply power to IR module.  active high. */
+#define EGPIO_H3600_AUD_AMP_ON		(1 << 10)  /* apply power to audio power amp.  active high. */
+#define EGPIO_H3600_AUD_PWR_ON		(1 << 11)  /* apply power to reset of audio circuit.  active high. */
+#define EGPIO_H3600_QMUTE		(1 << 12)  /* mute control for onboard UDA1341.  active high. */
+#define EGPIO_H3600_IR_FSEL		(1 << 13)  /* IR speed select: 1->fast, 0->slow */
+#define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
+#define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
+
+/********************* H3800, ASIC #2 ********************/
+
+#define _H3800_ASIC2_Base            (H3600_EGPIO_VIRT)
+#define H3800_ASIC2_OFFSET(s,x,y)    \
+    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
+#define H3800_ASIC2_NOFFSET(s,x,n,y) \
+    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
+
+#define _H3800_ASIC2_GPIO_Base                 0x0000
+#define _H3800_ASIC2_GPIO_Direction            0x0000    /* R/W, 16 bits 1:input, 0:output */
+#define _H3800_ASIC2_GPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
+#define _H3800_ASIC2_GPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
+#define _H3800_ASIC2_GPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
+#define _H3800_ASIC2_GPIO_InterruptClear       0x0010    /* W,   12 bits */
+#define _H3800_ASIC2_GPIO_InterruptFlag        0x0010    /* R,   12 bits - reads int status */
+#define _H3800_ASIC2_GPIO_Data                 0x0014    /* R/W, 16 bits */
+#define _H3800_ASIC2_GPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
+#define _H3800_ASIC2_GPIO_InterruptEnable      0x001c    /* R/W, 12 bits 1:enable interrupt */
+#define _H3800_ASIC2_GPIO_Alternate            0x003c    /* R/W, 12+1 bits - set alternate functions */
+
+#define H3800_ASIC2_GPIO_Direction          H3800_ASIC2_OFFSET( u16, GPIO, Direction )
+#define H3800_ASIC2_GPIO_InterruptType      H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
+#define H3800_ASIC2_GPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
+#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
+#define H3800_ASIC2_GPIO_InterruptClear     H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
+#define H3800_ASIC2_GPIO_InterruptFlag      H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
+#define H3800_ASIC2_GPIO_Data               H3800_ASIC2_OFFSET( u16, GPIO, Data )
+#define H3800_ASIC2_GPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
+#define H3800_ASIC2_GPIO_InterruptEnable    H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
+#define H3800_ASIC2_GPIO_Alternate          H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
+
+#define GPIO_H3800_ASIC2_IN_Y1_N          (1 << 0)   /* Output: Touchscreen Y1 */
+#define GPIO_H3800_ASIC2_IN_X0            (1 << 1)   /* Output: Touchscreen X0 */
+#define GPIO_H3800_ASIC2_IN_Y0            (1 << 2)   /* Output: Touchscreen Y0 */
+#define GPIO_H3800_ASIC2_IN_X1_N          (1 << 3)   /* Output: Touchscreen X1 */
+#define GPIO_H3800_ASIC2_BT_RST           (1 << 4)   /* Output: Bluetooth reset */
+#define GPIO_H3800_ASIC2_PEN_IRQ          (1 << 5)   /* Input : Pen down        */
+#define GPIO_H3800_ASIC2_SD_DETECT        (1 << 6)   /* Input : SD detect */
+#define GPIO_H3800_ASIC2_EAR_IN_N         (1 << 7)   /* Input : Audio jack plug inserted */
+#define GPIO_H3800_ASIC2_OPT_PCM_RESET    (1 << 8)   /* Output: */
+#define GPIO_H3800_ASIC2_OPT_RESET        (1 << 9)   /* Output: */
+#define GPIO_H3800_ASIC2_USB_DETECT_N     (1 << 10)  /* Input : */
+#define GPIO_H3800_ASIC2_SD_CON_SLT       (1 << 11)  /* Input : */
+
+#define _H3800_ASIC2_KPIO_Base                 0x0200
+#define _H3800_ASIC2_KPIO_Direction            0x0000    /* R/W, 12 bits 1:input, 0:output */
+#define _H3800_ASIC2_KPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
+#define _H3800_ASIC2_KPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
+#define _H3800_ASIC2_KPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
+#define _H3800_ASIC2_KPIO_InterruptClear       0x0010    /* W,   20 bits - 8 special */
+#define _H3800_ASIC2_KPIO_InterruptFlag        0x0010    /* R,   20 bits - 8 special - reads int status */
+#define _H3800_ASIC2_KPIO_Data                 0x0014    /* R/W, 16 bits */
+#define _H3800_ASIC2_KPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
+#define _H3800_ASIC2_KPIO_InterruptEnable      0x001c    /* R/W, 20 bits - 8 special */
+#define _H3800_ASIC2_KPIO_Alternate            0x003c    /* R/W, 6 bits */
+
+#define H3800_ASIC2_KPIO_Direction          H3800_ASIC2_OFFSET( u16, KPIO, Direction )
+#define H3800_ASIC2_KPIO_InterruptType      H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
+#define H3800_ASIC2_KPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
+#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
+#define H3800_ASIC2_KPIO_InterruptClear     H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
+#define H3800_ASIC2_KPIO_InterruptFlag      H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
+#define H3800_ASIC2_KPIO_Data               H3800_ASIC2_OFFSET( u16, KPIO, Data )
+#define H3800_ASIC2_KPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
+#define H3800_ASIC2_KPIO_InterruptEnable    H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
+#define H3800_ASIC2_KPIO_Alternate          H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
+
+#define H3800_ASIC2_KPIO_SPI_INT        ( 1 << 16 )
+#define H3800_ASIC2_KPIO_OWM_INT        ( 1 << 17 )
+#define H3800_ASIC2_KPIO_ADC_INT        ( 1 << 18 )
+#define H3800_ASIC2_KPIO_UART_0_INT     ( 1 << 19 )
+#define H3800_ASIC2_KPIO_UART_1_INT     ( 1 << 20 )
+#define H3800_ASIC2_KPIO_TIMER_0_INT    ( 1 << 21 )
+#define H3800_ASIC2_KPIO_TIMER_1_INT    ( 1 << 22 )
+#define H3800_ASIC2_KPIO_TIMER_2_INT    ( 1 << 23 )
+
+#define KPIO_H3800_ASIC2_RECORD_BTN_N     (1 << 0)   /* Record button */
+#define KPIO_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Keypad */
+#define KPIO_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* */
+#define KPIO_H3800_ASIC2_KEY_LEFT_N       (1 << 6)   /* */
+#define KPIO_H3800_ASIC2_KEY_RIGHT_N      (1 << 7)   /* */
+#define KPIO_H3800_ASIC2_KEY_AP1_N        (1 << 8)   /* Old "Calendar" */
+#define KPIO_H3800_ASIC2_KEY_AP2_N        (1 << 9)   /* Old "Schedule" */
+#define KPIO_H3800_ASIC2_KEY_AP3_N        (1 << 10)  /* Old "Q"        */
+#define KPIO_H3800_ASIC2_KEY_AP4_N        (1 << 11)  /* Old "Undo"     */
+
+/* Alternate KPIO functions (set by default) */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Action key */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* J1 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* J2 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* J3 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* J4 of keypad input */
+
+#define _H3800_ASIC2_SPI_Base                  0x0400
+#define _H3800_ASIC2_SPI_Control               0x0000    /* R/W 8 bits */
+#define _H3800_ASIC2_SPI_Data                  0x0004    /* R/W 8 bits */
+#define _H3800_ASIC2_SPI_ChipSelectDisabled    0x0008    /* W   8 bits */
+
+#define H3800_ASIC2_SPI_Control             H3800_ASIC2_OFFSET( u8, SPI, Control )
+#define H3800_ASIC2_SPI_Data                H3800_ASIC2_OFFSET( u8, SPI, Data )
+#define H3800_ASIC2_SPI_ChipSelectDisabled  H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
+
+#define _H3800_ASIC2_PWM_0_Base                0x0600
+#define _H3800_ASIC2_PWM_1_Base                0x0700
+#define _H3800_ASIC2_PWM_TimeBase              0x0000    /* R/W 6 bits */
+#define _H3800_ASIC2_PWM_PeriodTime            0x0004    /* R/W 12 bits */
+#define _H3800_ASIC2_PWM_DutyTime              0x0008    /* R/W 12 bits */
+
+#define H3800_ASIC2_PWM_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 0, TimeBase )
+#define H3800_ASIC2_PWM_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
+#define H3800_ASIC2_PWM_0_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
+
+#define H3800_ASIC2_PWM_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 1, TimeBase )
+#define H3800_ASIC2_PWM_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
+#define H3800_ASIC2_PWM_1_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
+
+#define H3800_ASIC2_PWM_TIMEBASE_MASK             0xf    /* Low 4 bits sets time base, max = 8 */
+#define H3800_ASIC2_PWM_TIMEBASE_ENABLE    ( 1 << 4 )    /* Enable clock */
+#define H3800_ASIC2_PWM_TIMEBASE_CLEAR     ( 1 << 5 )    /* Clear the PWM */
+
+#define _H3800_ASIC2_LED_0_Base                0x0800
+#define _H3800_ASIC2_LED_1_Base                0x0880
+#define _H3800_ASIC2_LED_2_Base                0x0900
+#define _H3800_ASIC2_LED_TimeBase              0x0000    /* R/W  7 bits */
+#define _H3800_ASIC2_LED_PeriodTime            0x0004    /* R/W 12 bits */
+#define _H3800_ASIC2_LED_DutyTime              0x0008    /* R/W 12 bits */
+#define _H3800_ASIC2_LED_AutoStopCount         0x000c    /* R/W 16 bits */
+
+#define H3800_ASIC2_LED_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 0, TimeBase )
+#define H3800_ASIC2_LED_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
+#define H3800_ASIC2_LED_0_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
+#define H3800_ASIC2_LED_0_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
+
+#define H3800_ASIC2_LED_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 1, TimeBase )
+#define H3800_ASIC2_LED_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
+#define H3800_ASIC2_LED_1_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
+#define H3800_ASIC2_LED_1_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
+
+#define H3800_ASIC2_LED_2_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 2, TimeBase )
+#define H3800_ASIC2_LED_2_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
+#define H3800_ASIC2_LED_2_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
+#define H3800_ASIC2_LED_2_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
+
+#define H3800_ASIC2_LED_TIMEBASE_MASK            0x0f    /* Low 4 bits sets time base, max = 13 */
+#define H3800_ASIC2_LED_TIMEBASE_BLINK     ( 1 << 4 )    /* Enable blinking */
+#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP  ( 1 << 5 )
+#define H3800_ASIC2_LED_TIMEBASE_ALWAYS    ( 1 << 6 )    /* Enable blink always */
+
+#define _H3800_ASIC2_UART_0_Base               0x0A00
+#define _H3800_ASIC2_UART_1_Base               0x0C00
+#define _H3800_ASIC2_UART_Receive              0x0000    /* R    8 bits */
+#define _H3800_ASIC2_UART_Transmit             0x0000    /*   W  8 bits */
+#define _H3800_ASIC2_UART_IntEnable            0x0004    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_IntVerify            0x0008    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_FIFOControl          0x000c    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_LineControl          0x0010    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_ModemStatus          0x0014    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_LineStatus           0x0018    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_ScratchPad           0x001c    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_DivisorLatchL        0x0020    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_DivisorLatchH        0x0024    /* R/W  8 bits */
+
+#define H3800_ASIC2_UART_0_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 0, Receive )
+#define H3800_ASIC2_UART_0_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 0, Transmit )
+#define H3800_ASIC2_UART_0_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntEnable )
+#define H3800_ASIC2_UART_0_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntVerify )
+#define H3800_ASIC2_UART_0_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, FIFOControl )
+#define H3800_ASIC2_UART_0_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, LineControl )
+#define H3800_ASIC2_UART_0_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 0, ModemStatus )
+#define H3800_ASIC2_UART_0_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 0, LineStatus )
+#define H3800_ASIC2_UART_0_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 0, ScratchPad )
+#define H3800_ASIC2_UART_0_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchL )
+#define H3800_ASIC2_UART_0_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchH )
+
+#define H3800_ASIC2_UART_1_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 1, Receive )
+#define H3800_ASIC2_UART_1_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 1, Transmit )
+#define H3800_ASIC2_UART_1_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntEnable )
+#define H3800_ASIC2_UART_1_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntVerify )
+#define H3800_ASIC2_UART_1_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, FIFOControl )
+#define H3800_ASIC2_UART_1_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, LineControl )
+#define H3800_ASIC2_UART_1_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 1, ModemStatus )
+#define H3800_ASIC2_UART_1_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 1, LineStatus )
+#define H3800_ASIC2_UART_1_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 1, ScratchPad )
+#define H3800_ASIC2_UART_1_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchL )
+#define H3800_ASIC2_UART_1_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchH )
+
+#define _H3800_ASIC2_TIMER_Base                0x0E00
+#define _H3800_ASIC2_TIMER_Command             0x0000    /* R/W  8 bits */
+
+#define H3800_ASIC2_TIMER_Command           H3800_ASIC2_OFFSET( u8, Timer, Command )
+
+#define H3800_ASIC2_TIMER_GAT_0            ( 1 << 0 )    /* Gate enable, counter 0 */
+#define H3800_ASIC2_TIMER_GAT_1            ( 1 << 1 )    /* Gate enable, counter 1 */
+#define H3800_ASIC2_TIMER_GAT_2            ( 1 << 2 )    /* Gate enable, counter 2 */
+#define H3800_ASIC2_TIMER_CLK_0            ( 1 << 3 )    /* Clock enable, counter 0 */
+#define H3800_ASIC2_TIMER_CLK_1            ( 1 << 4 )    /* Clock enable, counter 1 */
+#define H3800_ASIC2_TIMER_CLK_2            ( 1 << 5 )    /* Clock enable, counter 2 */
+#define H3800_ASIC2_TIMER_MODE_0           ( 1 << 6 )    /* Mode 0 enable, counter 0 */
+#define H3800_ASIC2_TIMER_MODE_1           ( 1 << 7 )    /* Mode 0 enable, counter 1 */
+
+#define _H3800_ASIC2_CLOCK_Base                0x1000
+#define _H3800_ASIC2_CLOCK_Enable              0x0000    /* R/W  18 bits */
+
+#define H3800_ASIC2_CLOCK_Enable            H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
+
+#define H3800_ASIC2_CLOCK_AUDIO_1              0x0001    /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_2              0x0002    /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_3              0x0004    /* Enable 5.6 MHz clock for 11 kHZ sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_4              0x0008    /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
+#define H3800_ASIC2_CLOCK_ADC              ( 1 << 4 )    /* 1.024 MHz clock to ADC */
+#define H3800_ASIC2_CLOCK_SPI              ( 1 << 5 )    /* 4.096 MHz clock to SPI */
+#define H3800_ASIC2_CLOCK_OWM              ( 1 << 6 )    /* 4.096 MHz clock to OWM */
+#define H3800_ASIC2_CLOCK_PWM              ( 1 << 7 )    /* 2.048 MHz clock to PWM */
+#define H3800_ASIC2_CLOCK_UART_1           ( 1 << 8 )    /* 24.576 MHz clock to UART1 (turn off bit 16) */
+#define H3800_ASIC2_CLOCK_UART_0           ( 1 << 9 )    /* 24.576 MHz clock to UART0 (turn off bit 17) */
+#define H3800_ASIC2_CLOCK_SD_1             ( 1 << 10 )   /* 16.934 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_2             ( 2 << 10 )   /* 24.576 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_3             ( 3 << 10 )   /* 33.869 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_4             ( 4 << 10 )   /* 49.152 MHz to SD */
+#define H3800_ASIC2_CLOCK_EX0              ( 1 << 13 )   /* Enable 32.768 kHz crystal */
+#define H3800_ASIC2_CLOCK_EX1              ( 1 << 14 )   /* Enable 24.576 MHz crystal */
+#define H3800_ASIC2_CLOCK_EX2              ( 1 << 15 )   /* Enable 33.869 MHz crystal */
+#define H3800_ASIC2_CLOCK_SLOW_UART_1      ( 1 << 16 )   /* Enable 3.686 MHz to UART1 (turn off bit 8) */
+#define H3800_ASIC2_CLOCK_SLOW_UART_0      ( 1 << 17 )   /* Enable 3.686 MHz to UART0 (turn off bit 9) */
+
+#define _H3800_ASIC2_ADC_Base                  0x1200
+#define _H3800_ASIC2_ADC_Multiplexer           0x0000    /* R/W 4 bits - low 3 bits set channel */
+#define _H3800_ASIC2_ADC_ControlStatus         0x0004    /* R/W 8 bits */
+#define _H3800_ASIC2_ADC_Data                  0x0008    /* R   10 bits */
+
+#define H3800_ASIC2_ADC_Multiplexer       H3800_ASIC2_OFFSET(  u8, ADC, Multiplexer )
+#define H3800_ASIC2_ADC_ControlStatus     H3800_ASIC2_OFFSET(  u8, ADC, ControlStatus )
+#define H3800_ASIC2_ADC_Data              H3800_ASIC2_OFFSET( u16, ADC, Data )
+
+#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK         0x07    /* Low 3 bits sets channel.  max = 4 */
+#define H3600_ASIC2_ADC_MUX_CLKEN          ( 1 << 3 )    /* Enable clock */
+
+#define H3600_ASIC2_ADC_CSR_ADPS_MASK            0x0f    /* Low 4 bits sets prescale, max = 8 */
+#define H3600_ASIC2_ADC_CSR_FREE_RUN       ( 1 << 4 )
+#define H3600_ASIC2_ADC_CSR_INT_ENABLE     ( 1 << 5 )
+#define H3600_ASIC2_ADC_CSR_START          ( 1 << 6 )    /* Set to start conversion.  Goes to 0 when done */
+#define H3600_ASIC2_ADC_CSR_ENABLE         ( 1 << 7 )    /* 1:power up ADC, 0:power down */
+
+
+#define _H3800_ASIC2_INTR_Base                 0x1600
+#define _H3800_ASIC2_INTR_MaskAndFlag          0x0000    /* R/(W) 8bits */
+#define _H3800_ASIC2_INTR_ClockPrescale        0x0004    /* R/(W) 5bits */
+#define _H3800_ASIC2_INTR_TimerSet             0x0008    /* R/(W) 8bits */
+
+#define H3800_ASIC2_INTR_MaskAndFlag      H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
+#define H3800_ASIC2_INTR_ClockPrescale    H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
+#define H3800_ASIC2_INTR_TimerSet         H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
+
+#define H3800_ASIC2_INTR_GLOBAL_MASK       ( 1 << 0 )    /* Global interrupt mask */
+#define H3800_ASIC2_INTR_POWER_ON_RESET    ( 1 << 1 )    /* 01: Power on reset (bits 1 & 2 ) */
+#define H3800_ASIC2_INTR_EXTERNAL_RESET    ( 2 << 1 )    /* 10: External reset (bits 1 & 2 ) */
+#define H3800_ASIC2_INTR_MASK_UART_0       ( 1 << 4 )
+#define H3800_ASIC2_INTR_MASK_UART_1       ( 1 << 5 )
+#define H3800_ASIC2_INTR_MASK_TIMER        ( 1 << 6 )
+#define H3800_ASIC2_INTR_MASK_OWM          ( 1 << 7 )
+
+#define H3800_ASIC2_INTR_CLOCK_PRESCALE          0x0f    /* 4 bits, max 14 */
+#define H3800_ASIC2_INTR_SET               ( 1 << 4 )    /* Time base enable */
+
+
+#define _H3800_ASIC2_OWM_Base                  0x1800
+#define _H3800_ASIC2_OWM_Command               0x0000    /* R/W 4 bits command register */
+#define _H3800_ASIC2_OWM_Data                  0x0004    /* R/W 8 bits, transmit / receive buffer */
+#define _H3800_ASIC2_OWM_Interrupt             0x0008    /* R/W Command register */
+#define _H3800_ASIC2_OWM_InterruptEnable       0x000c    /* R/W Command register */
+#define _H3800_ASIC2_OWM_ClockDivisor          0x0010    /* R/W 5 bits of divisor and pre-scale */
+
+#define H3800_ASIC2_OWM_Command            H3800_ASIC2_OFFSET( u8, OWM, Command )
+#define H3800_ASIC2_OWM_Data               H3800_ASIC2_OFFSET( u8, OWM, Data )
+#define H3800_ASIC2_OWM_Interrupt          H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
+#define H3800_ASIC2_OWM_InterruptEnable    H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
+#define H3800_ASIC2_OWM_ClockDivisor       H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
+
+#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 )    /* Set to force reset on 1-wire bus */
+#define H3800_ASIC2_OWM_CMD_SRA            ( 1 << 1 )    /* Set to switch to Search ROM accelerator mode */
+#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT      ( 1 << 2 )    /* Write only - forces bus low */
+#define H3800_ASIC2_OWM_CMD_DQ_INPUT       ( 1 << 3 )    /* Read only - reflects state of bus */
+
+#define H3800_ASIC2_OWM_INT_PD             ( 1 << 0 )    /* Presence detect */
+#define H3800_ASIC2_OWM_INT_PDR            ( 1 << 1 )    /* Presence detect result */
+#define H3800_ASIC2_OWM_INT_TBE            ( 1 << 2 )    /* Transmit buffer empty */
+#define H3800_ASIC2_OWM_INT_TEMT           ( 1 << 3 )    /* Transmit shift register empty */
+#define H3800_ASIC2_OWM_INT_RBF            ( 1 << 4 )    /* Receive buffer full */
+
+#define H3800_ASIC2_OWM_INTEN_EPD          ( 1 << 0 )    /* Enable receive buffer full interrupt */
+#define H3800_ASIC2_OWM_INTEN_IAS          ( 1 << 1 )    /* Enable transmit shift register empty interrupt */
+#define H3800_ASIC2_OWM_INTEN_ETBE         ( 1 << 2 )    /* Enable transmit buffer empty interrupt */
+#define H3800_ASIC2_OWM_INTEN_ETMT         ( 1 << 3 )    /* INTR active state */
+#define H3800_ASIC2_OWM_INTEN_ERBF         ( 1 << 4 )    /* Enable presence detect interrupt */
+
+#define _H3800_ASIC2_FlashCtl_Base             0x1A00
+
+/****************************************************/
+/* H3800, ASIC #1
+ * This ASIC is accesed through ASIC #2, and
+ * mapped into the 1c00 - 1f00 region
+ */
+
+#define H3800_ASIC1_OFFSET(s,x,y)   \
+     (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
+
+#define _H3800_ASIC1_MMC_Base             0x1c00
+
+#define _H3800_ASIC1_MMC_StartStopClock     0x00    /* R/W 8bit                                  */
+#define _H3800_ASIC1_MMC_Status             0x02    /* R   See below, default 0x0040             */
+#define _H3800_ASIC1_MMC_ClockRate          0x04    /* R/W 8bit, low 3 bits are clock divisor    */
+#define _H3800_ASIC1_MMC_SPIRegister        0x08    /* R/W 8bit, see below                       */
+#define _H3800_ASIC1_MMC_CmdDataCont        0x0a    /* R/W 8bit, write to start MMC adapter      */
+#define _H3800_ASIC1_MMC_ResponseTimeout    0x0c    /* R/W 8bit, clocks before response timeout  */
+#define _H3800_ASIC1_MMC_ReadTimeout        0x0e    /* R/W 16bit, clocks before received data timeout */
+#define _H3800_ASIC1_MMC_BlockLength        0x10    /* R/W 10bit */
+#define _H3800_ASIC1_MMC_NumOfBlocks        0x12    /* R/W 16bit, in block mode, number of blocks  */
+#define _H3800_ASIC1_MMC_InterruptMask      0x1a    /* R/W 8bit */
+#define _H3800_ASIC1_MMC_CommandNumber      0x1c    /* R/W 6 bits */
+#define _H3800_ASIC1_MMC_ArgumentH          0x1e    /* R/W 16 bits  */
+#define _H3800_ASIC1_MMC_ArgumentL          0x20    /* R/W 16 bits */
+#define _H3800_ASIC1_MMC_ResFifo            0x22    /* R   8 x 16 bits - contains response FIFO */
+#define _H3800_ASIC1_MMC_BufferPartFull     0x28    /* R/W 8 bits */
+
+#define H3800_ASIC1_MMC_StartStopClock    H3800_ASIC1_OFFSET(  u8, MMC, StartStopClock )
+#define H3800_ASIC1_MMC_Status            H3800_ASIC1_OFFSET( u16, MMC, Status )
+#define H3800_ASIC1_MMC_ClockRate         H3800_ASIC1_OFFSET(  u8, MMC, ClockRate )
+#define H3800_ASIC1_MMC_SPIRegister       H3800_ASIC1_OFFSET(  u8, MMC, SPIRegister )
+#define H3800_ASIC1_MMC_CmdDataCont       H3800_ASIC1_OFFSET(  u8, MMC, CmdDataCont )
+#define H3800_ASIC1_MMC_ResponseTimeout   H3800_ASIC1_OFFSET(  u8, MMC, ResponseTimeout )
+#define H3800_ASIC1_MMC_ReadTimeout       H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
+#define H3800_ASIC1_MMC_BlockLength       H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
+#define H3800_ASIC1_MMC_NumOfBlocks       H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
+#define H3800_ASIC1_MMC_InterruptMask     H3800_ASIC1_OFFSET(  u8, MMC, InterruptMask )
+#define H3800_ASIC1_MMC_CommandNumber     H3800_ASIC1_OFFSET(  u8, MMC, CommandNumber )
+#define H3800_ASIC1_MMC_ArgumentH         H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
+#define H3800_ASIC1_MMC_ArgumentL         H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
+#define H3800_ASIC1_MMC_ResFifo           H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
+#define H3800_ASIC1_MMC_BufferPartFull    H3800_ASIC1_OFFSET(  u8, MMC, BufferPartFull )
+
+#define H3800_ASIC1_MMC_STOP_CLOCK                   (1 << 0)   /* Write to "StartStopClock" register */
+#define H3800_ASIC1_MMC_START_CLOCK                  (1 << 1)
+
+#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT          (1 << 0)
+#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT      (1 << 1)
+#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR       (1 << 2)
+#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR        (1 << 3)
+#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR        (1 << 4)  /* SPI data token error received */
+#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR    (1 << 5)
+#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY            (1 << 6)
+#define H3800_ASIC1_MMC_STATUS_FIFO_FULL             (1 << 7)
+#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE          (1 << 8)  /* MultiMediaCard clock stopped */
+#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE    (1 << 11) /* Write operation, indicates transfer finished */
+#define H3800_ASIC1_MMC_STATUS_END_PROGRAM           (1 << 12) /* End write and read operations */
+#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE  (1 << 13) /* End command response */
+
+#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE           (1 << 0)  /* Enables SPI mode */
+#define H3800_ASIC1_MMC_SPI_REG_CRC_ON               (1 << 1)  /* 1:turn on CRC    */
+#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE        (1 << 2)  /* 1:turn on SPI CS */
+#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK      0x38      /* Bits 3,4,5 are the SPI CS relative address */
+
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE  0x00
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1           0x01
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2           0x02
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3           0x03
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE         (1 << 2)  /* This command contains a data transfer */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE               (1 << 3)  /* This data transfer is a write */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE         (1 << 4)  /* This data transfer is in stream mode */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT            (1 << 5)  /* Busy signal expected after current cmd */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE          (1 << 6)  /* Enables the 80 bits for initializing card */
+
+#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE       (1 << 0)
+#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE             (1 << 1)
+#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE     (1 << 2)
+#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY             (1 << 3)
+
+#define H3800_ASIC1_MMC_BUFFER_PART_FULL                  (1 << 0)
+
+/********* GPIO **********/
+
+#define _H3800_ASIC1_GPIO_Base        0x1e00
+
+#define _H3800_ASIC1_GPIO_Mask          0x30    /* R/W 0:don't mask, 1:mask interrupt */
+#define _H3800_ASIC1_GPIO_Direction     0x32    /* R/W 0:input, 1:output              */
+#define _H3800_ASIC1_GPIO_Out           0x34    /* R/W 0:output low, 1:output high    */
+#define _H3800_ASIC1_GPIO_TriggerType   0x36    /* R/W 0:level, 1:edge                */
+#define _H3800_ASIC1_GPIO_EdgeTrigger   0x38    /* R/W 0:falling, 1:rising            */
+#define _H3800_ASIC1_GPIO_LevelTrigger  0x3A    /* R/W 0:low, 1:high level detect     */
+#define _H3800_ASIC1_GPIO_LevelStatus   0x3C    /* R/W 0:none, 1:detect               */
+#define _H3800_ASIC1_GPIO_EdgeStatus    0x3E    /* R/W 0:none, 1:detect               */
+#define _H3800_ASIC1_GPIO_State         0x40    /* R   See masks below  (default 0)         */
+#define _H3800_ASIC1_GPIO_Reset         0x42    /* R/W See masks below  (default 0x04)      */
+#define _H3800_ASIC1_GPIO_SleepMask     0x44    /* R/W 0:don't mask, 1:mask trigger in sleep mode  */
+#define _H3800_ASIC1_GPIO_SleepDir      0x46    /* R/W direction 0:input, 1:output in sleep mode    */
+#define _H3800_ASIC1_GPIO_SleepOut      0x48    /* R/W level 0:low, 1:high in sleep mode           */
+#define _H3800_ASIC1_GPIO_Status        0x4A    /* R   Pin status                                  */
+#define _H3800_ASIC1_GPIO_BattFaultDir  0x4C    /* R/W direction 0:input, 1:output in batt_fault   */
+#define _H3800_ASIC1_GPIO_BattFaultOut  0x4E    /* R/W level 0:low, 1:high in batt_fault           */
+
+#define H3800_ASIC1_GPIO_Mask         H3800_ASIC1_OFFSET( u16, GPIO, Mask )
+#define H3800_ASIC1_GPIO_Direction    H3800_ASIC1_OFFSET( u16, GPIO, Direction )
+#define H3800_ASIC1_GPIO_Out          H3800_ASIC1_OFFSET( u16, GPIO, Out )
+#define H3800_ASIC1_GPIO_TriggerType  H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
+#define H3800_ASIC1_GPIO_EdgeTrigger  H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
+#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
+#define H3800_ASIC1_GPIO_LevelStatus  H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
+#define H3800_ASIC1_GPIO_EdgeStatus   H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
+#define H3800_ASIC1_GPIO_State        H3800_ASIC1_OFFSET(  u8, GPIO, State )
+#define H3800_ASIC1_GPIO_Reset        H3800_ASIC1_OFFSET(  u8, GPIO, Reset )
+#define H3800_ASIC1_GPIO_SleepMask    H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
+#define H3800_ASIC1_GPIO_SleepDir     H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
+#define H3800_ASIC1_GPIO_SleepOut     H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
+#define H3800_ASIC1_GPIO_Status       H3800_ASIC1_OFFSET( u16, GPIO, Status )
+#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
+#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
+
+#define H3800_ASIC1_GPIO_STATE_MASK            (1 << 0)
+#define H3800_ASIC1_GPIO_STATE_DIRECTION       (1 << 1)
+#define H3800_ASIC1_GPIO_STATE_OUT             (1 << 2)
+#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE    (1 << 3)
+#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER    (1 << 4)
+#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER   (1 << 5)
+
+#define H3800_ASIC1_GPIO_RESET_SOFTWARE        (1 << 0)
+#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP      (1 << 1)
+#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON    (1 << 2)
+
+/* These are all outputs */
+#define GPIO_H3800_ASIC1_IR_ON_N          (1 << 0)   /* Apply power to the IR Module */
+#define GPIO_H3800_ASIC1_SD_PWR_ON        (1 << 1)   /* Secure Digital power on */
+#define GPIO_H3800_ASIC1_RS232_ON         (1 << 2)   /* Turn on power to the RS232 chip ? */
+#define GPIO_H3800_ASIC1_PULSE_GEN        (1 << 3)   /* Goes to speaker / earphone */
+#define GPIO_H3800_ASIC1_CH_TIMER         (1 << 4)   /* */
+#define GPIO_H3800_ASIC1_LCD_5V_ON        (1 << 5)   /* Enables LCD_5V */
+#define GPIO_H3800_ASIC1_LCD_ON           (1 << 6)   /* Enables LCD_3V */
+#define GPIO_H3800_ASIC1_LCD_PCI          (1 << 7)   /* Connects to PDWN on LCD controller */
+#define GPIO_H3800_ASIC1_VGH_ON           (1 << 8)   /* Drives VGH on the LCD (+9??) */
+#define GPIO_H3800_ASIC1_VGL_ON           (1 << 9)   /* Drivers VGL on the LCD (-6??) */
+#define GPIO_H3800_ASIC1_FL_PWR_ON        (1 << 10)  /* Frontlight power on */
+#define GPIO_H3800_ASIC1_BT_PWR_ON        (1 << 11)  /* Bluetooth power on */
+#define GPIO_H3800_ASIC1_SPK_ON           (1 << 12)  /* */
+#define GPIO_H3800_ASIC1_EAR_ON_N         (1 << 13)  /* */
+#define GPIO_H3800_ASIC1_AUD_PWR_ON       (1 << 14)  /* */
+
+/* Write enable for the flash */
+
+#define _H3800_ASIC1_FlashWP_Base         0x1F00
+#define _H3800_ASIC1_FlashWP_VPP_ON         0x00    /* R   1: write, 0: protect */
+#define H3800_ASIC1_FlashWP_VPP_ON       H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
+
+#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
new file mode 100644
index 00000000000..5976435f42c
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/hardware.h
+ *
+ * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware definitions for SA1100 architecture
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for SA1111 added.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define UNCACHEABLE_ADDR	0xfa050000
+
+
+/*
+ * SA1100 internal I/O mappings
+ *
+ * We have the following mapping:
+ *      phys            virt
+ *      80000000        f8000000
+ *      90000000        fa000000
+ *      a0000000        fc000000
+ *      b0000000        fe000000
+ */
+
+#define VIO_BASE        0xf8000000	/* virtual start of IO space */
+#define VIO_SHIFT       3		/* x = IO space shrink power */
+#define PIO_START       0x80000000	/* physical start of IO space */
+
+#define io_p2v( x )             \
+   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+#define io_v2p( x )             \
+   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
+# define __PREG(x)	(io_v2p((unsigned long)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#include "SA-1100.h"
+
+#ifdef CONFIG_SA1101
+#include "SA-1101.h"
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/include/mach/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h
new file mode 100644
index 00000000000..4c99c8f5e61
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/ide.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/ide.h
+ *
+ * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
+ *
+ * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *              Get rid of the special ide_init_hwif_ports() functions
+ *              and make a generalised function that can be used by all
+ *              architectures.
+ */
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#error "This code is broken and needs update to match with current ide support"
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+				       unsigned long ctrl_port, int *irq)
+{
+	unsigned long reg = data_port;
+	int i;
+	int regincr = 1;
+
+	/* The Empeg board has the first two address lines unused */
+	if (machine_is_empeg())
+		regincr = 1 << 2;
+
+	/* The LART doesn't use A0 for IDE */
+	if (machine_is_lart())
+		regincr = 1 << 1;
+
+	memset(hw, 0, sizeof(*hw));
+
+	for (i = 0; i <= 7; i++) {
+		hw->io_ports_array[i] = reg;
+		reg += regincr;
+	}
+
+	hw->io_ports.ctl_addr = ctrl_port;
+
+	if (irq)
+		*irq = 0;
+}
+
+/*
+ * This registers the standard ports for this architecture with the IDE
+ * driver.
+ */
+static __inline__ void
+ide_init_default_hwifs(void)
+{
+    if (machine_is_lart()) {
+#ifdef CONFIG_SA1100_LART
+        hw_regs_t hw;
+
+        /* Enable GPIO as interrupt line */
+        GPDR &= ~LART_GPIO_IDE;
+	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
+
+        /* set PCMCIA interface timing */
+        MECR = 0x00060006;
+
+        /* init the interface */
+	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
+        hw.irq = LART_IRQ_IDE;
+        ide_register_hw(&hw);
+#endif
+    }
+}
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
new file mode 100644
index 00000000000..0c070a6149b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many 
+ * drivers out there that might just work if we fake them...
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
new file mode 100644
index 00000000000..0cb36609b3a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
+ * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
+ *
+ * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
+ */
+
+#define	IRQ_GPIO0		0
+#define	IRQ_GPIO1		1
+#define	IRQ_GPIO2		2
+#define	IRQ_GPIO3		3
+#define	IRQ_GPIO4		4
+#define	IRQ_GPIO5		5
+#define	IRQ_GPIO6		6
+#define	IRQ_GPIO7		7
+#define	IRQ_GPIO8		8
+#define	IRQ_GPIO9		9
+#define	IRQ_GPIO10		10
+#define	IRQ_GPIO11_27		11
+#define	IRQ_LCD  		12	/* LCD controller           */
+#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
+#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
+#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
+#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
+#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
+#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
+#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
+#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
+#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
+#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
+#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
+#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
+#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
+#define	IRQ_OST0 		26	/* OS Timer match 0         */
+#define	IRQ_OST1 		27	/* OS Timer match 1         */
+#define	IRQ_OST2 		28	/* OS Timer match 2         */
+#define	IRQ_OST3 		29	/* OS Timer match 3         */
+#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
+#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
+
+#define	IRQ_GPIO11		32
+#define	IRQ_GPIO12		33
+#define	IRQ_GPIO13		34
+#define	IRQ_GPIO14		35
+#define	IRQ_GPIO15		36
+#define	IRQ_GPIO16		37
+#define	IRQ_GPIO17		38
+#define	IRQ_GPIO18		39
+#define	IRQ_GPIO19		40
+#define	IRQ_GPIO20		41
+#define	IRQ_GPIO21		42
+#define	IRQ_GPIO22		43
+#define	IRQ_GPIO23		44
+#define	IRQ_GPIO24		45
+#define	IRQ_GPIO25		46
+#define	IRQ_GPIO26		47
+#define	IRQ_GPIO27		48
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.  IRQs 49 to 64 are available.
+ */
+#define IRQ_BOARD_START		49
+#define IRQ_BOARD_END		65
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SA1100_H3800)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
+#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
+#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
+#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
+#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
+#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
+#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
+#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
+#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
+#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
+#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
+#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
+#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
+#define H3800_KPIO_IRQ_COUNT    9
+
+#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
+#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
+#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
+#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
+#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
+#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
+#define H3800_GPIO_IRQ_COUNT    5
diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
new file mode 100644
index 00000000000..cc6b4bfcecf
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/jornada720.h
+ *
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
+ *
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *  Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ /* HP Jornada 7xx microprocessor commands */
+#define GETBATTERYDATA		0xc0
+#define GETSCANKEYCODE		0x90
+#define GETTOUCHSAMPLES		0xa0
+#define GETCONTRAST		0xD0
+#define SETCONTRAST		0xD1
+#define GETBRIGHTNESS		0xD2
+#define SETBRIGHTNESS		0xD3
+#define CONTRASTOFF		0xD8
+#define BRIGHTNESSOFF		0xD9
+#define PWMOFF			0xDF
+#define TXDUMMY			0x11
+#define ERRORCODE		0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
diff --git a/arch/arm/mach-sa1100/include/mach/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h
new file mode 100644
index 00000000000..8a5482d908d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/lart.h
@@ -0,0 +1,13 @@
+#ifndef _INCLUDE_LART_H
+#define _INCLUDE_LART_H
+
+#define LART_GPIO_ETH0			GPIO_GPIO0
+#define LART_IRQ_ETH0			IRQ_GPIO0
+
+#define LART_GPIO_IDE			GPIO_GPIO1
+#define LART_IRQ_IDE			IRQ_GPIO1
+
+#define LART_GPIO_UCB1200		GPIO_GPIO18
+#define LART_IRQ_UCB1200		IRQ_GPIO18
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
new file mode 100644
index 00000000000..fb8b09a57ad
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-sa1100/include/mach/mcp.h
+ *
+ *  Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ARCH_MCP_H
+#define __ASM_ARM_ARCH_MCP_H
+
+#include <linux/types.h>
+
+struct mcp_plat_data {
+	u32 mccr0;
+	u32 mccr1;
+	unsigned int sclk_rate;
+};
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
new file mode 100644
index 00000000000..29f639e2afc
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/memory.h
+ *
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset is 0xc0000000 on the SA1100
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SA1111
+void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	sa1111_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
+
+#endif
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * On the SA1100, bus addresses are equivalent to physical addresses.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much convenient to use Linux's NUMA support to implement our 
+ * memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS	27
+
+/*
+ * Cache flushing area - SA1100 zero bank
+ */
+#define FLUSH_BASE_PHYS		0xe0000000
+#define FLUSH_BASE		0xf5000000
+#define FLUSH_BASE_MINICACHE	0xf5100000
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
new file mode 100644
index 00000000000..eaa09e86ad1
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -0,0 +1,24 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_SA1100_MTD_XIP_H__
+#define __ARCH_SA1100_MTD_XIP_H__
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
new file mode 100644
index 00000000000..d3f044f92c0
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/neponset.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_NEPONSET_H
+#define __ASM_ARCH_NEPONSET_H
+
+/*
+ * Neponset definitions: 
+ */
+
+#define NEPONSET_CPLD_BASE      (0x10000000)
+#define Nep_p2v( x )            ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
+#define Nep_v2p( x )            ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
+
+#define _IRR                    0x10000024      /* Interrupt Reason Register */
+#define _AUD_CTL                0x100000c0      /* Audio controls (RW)       */
+#define _MDM_CTL_0              0x100000b0      /* Modem control 0 (RW)      */
+#define _MDM_CTL_1              0x100000b4      /* Modem control 1 (RW)      */
+#define _NCR_0	                0x100000a0      /* Control Register (RW)     */
+#define _KP_X_OUT               0x10000090      /* Keypad row write (RW)     */
+#define _KP_Y_IN                0x10000080      /* Keypad column read (RO)   */
+#define _SWPK                   0x10000020      /* Switch pack (RO)          */
+#define _WHOAMI                 0x10000000      /* System ID Register (RO)   */
+
+#define _LEDS                   0x10000010      /* LEDs [31:0] (WO)          */
+
+#define IRR                     (*((volatile u_char *) Nep_p2v(_IRR)))
+#define AUD_CTL                 (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
+#define MDM_CTL_0               (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
+#define MDM_CTL_1               (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
+#define NCR_0			(*((volatile u_char *) Nep_p2v(_NCR_0)))
+#define KP_X_OUT                (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
+#define KP_Y_IN                 (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
+#define SWPK                    (*((volatile u_char *) Nep_p2v(_SWPK)))
+#define WHOAMI                  (*((volatile u_char *) Nep_p2v(_WHOAMI)))
+
+#define LEDS                    (*((volatile Word   *) Nep_p2v(_LEDS)))
+
+#define IRR_ETHERNET		(1<<0)
+#define IRR_USAR		(1<<1)
+#define IRR_SA1111		(1<<2)
+
+#define AUD_SEL_1341            (1<<0)
+#define AUD_MUTE_1341           (1<<1)
+
+#define MDM_CTL0_RTS1		(1 << 0)
+#define MDM_CTL0_DTR1		(1 << 1)
+#define MDM_CTL0_RTS2		(1 << 2)
+#define MDM_CTL0_DTR2		(1 << 3)
+
+#define MDM_CTL1_CTS1		(1 << 0)
+#define MDM_CTL1_DSR1		(1 << 1)
+#define MDM_CTL1_DCD1		(1 << 2)
+#define MDM_CTL1_CTS2		(1 << 3)
+#define MDM_CTL1_DSR2		(1 << 4)
+#define MDM_CTL1_DCD2		(1 << 5)
+
+#define NCR_GP01_OFF		(1<<0)
+#define NCR_TP_PWR_EN		(1<<1)
+#define NCR_MS_PWR_EN		(1<<2)
+#define NCR_ENET_OSC_EN		(1<<3)
+#define NCR_SPI_KB_WK_UP	(1<<4)
+#define NCR_A0VPP		(1<<5)
+#define NCR_A1VPP		(1<<6)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h
new file mode 100644
index 00000000000..f61957e6842
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#include "hardware.h"
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Exit from Low Power/Sleep */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+static inline void clear_reset_status(unsigned int mask)
+{
+	RCSR = mask;
+}
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
new file mode 100644
index 00000000000..ec27d6e1214
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -0,0 +1,43 @@
+#ifndef _INCLUDE_SHANNON_H
+#define _INCLUDE_SHANNON_H
+
+/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
+ * written by <forsyth@vitanuova.com> */
+
+#define SHANNON_GPIO_SPI_FLASH		GPIO_GPIO (0)	/* Output - Driven low, enables SPI to flash */
+#define SHANNON_GPIO_SPI_DSP		GPIO_GPIO (1)	/* Output - Driven low, enables SPI to DSP */
+/* lcd lower = GPIO 2-9 */
+#define SHANNON_GPIO_SPI_OUTPUT		GPIO_GPIO (10)	/* Output - SPI output to DSP */
+#define SHANNON_GPIO_SPI_INPUT		GPIO_GPIO (11)	/* Input  - SPI input from DSP */
+#define SHANNON_GPIO_SPI_CLOCK		GPIO_GPIO (12)	/* Output - Clock for SPI */
+#define SHANNON_GPIO_SPI_FRAME		GPIO_GPIO (13)	/* Output - Frame marker - not used */
+#define SHANNON_GPIO_SPI_RTS		GPIO_GPIO (14)	/* Input  - SPI Ready to Send */
+#define SHANNON_IRQ_GPIO_SPI_RTS	IRQ_GPIO14
+#define SHANNON_GPIO_SPI_CTS		GPIO_GPIO (15)	/* Output - SPI Clear to Send */
+#define SHANNON_GPIO_IRQ_CODEC		GPIO_GPIO (16)	/* in, irq from ucb1200 */
+#define SHANNON_IRQ_GPIO_IRQ_CODEC	IRQ_GPIO16
+#define SHANNON_GPIO_DSP_RESET		GPIO_GPIO (17)	/* Output - Drive low to reset the DSP */
+#define SHANNON_GPIO_CODEC_RESET	GPIO_GPIO (18)	/* Output - Drive low to reset the UCB1x00 */
+#define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
+#define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
+#define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
+#define SHANNON_GPIO_DISP_EN		GPIO_GPIO (22)	/* out */
+/* XXX GPIO 23 unaccounted for */
+#define SHANNON_GPIO_EJECT_0		GPIO_GPIO (24)	/* in */
+#define SHANNON_IRQ_GPIO_EJECT_0	IRQ_GPIO24
+#define SHANNON_GPIO_EJECT_1		GPIO_GPIO (25)	/* in */
+#define SHANNON_IRQ_GPIO_EJECT_1	IRQ_GPIO25
+#define SHANNON_GPIO_RDY_0		GPIO_GPIO (26)	/* in */
+#define SHANNON_IRQ_GPIO_RDY_0		IRQ_GPIO26
+#define SHANNON_GPIO_RDY_1		GPIO_GPIO (27)	/* in */
+#define SHANNON_IRQ_GPIO_RDY_1		IRQ_GPIO27
+
+/* MCP UCB codec GPIO pins... */
+
+#define SHANNON_UCB_GPIO_BACKLIGHT	9
+#define SHANNON_UCB_GPIO_BRIGHT_MASK  	7
+#define SHANNON_UCB_GPIO_BRIGHT		6
+#define SHANNON_UCB_GPIO_CONTRAST_MASK	0x3f
+#define SHANNON_UCB_GPIO_CONTRAST	0
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
new file mode 100644
index 00000000000..9296c4513ce
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -0,0 +1,112 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/simpad.h
+ *
+ * based of assabet.h same as HUW_Webpanel
+ *
+ * This file contains the hardware specific definitions for SIMpad
+ *
+ * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
+ */
+
+#ifndef __ASM_ARCH_SIMPAD_H
+#define __ASM_ARCH_SIMPAD_H
+
+
+#define GPIO_UART1_RTS	GPIO_GPIO14
+#define GPIO_UART1_DTR	GPIO_GPIO7
+#define GPIO_UART1_CTS	GPIO_GPIO8
+#define GPIO_UART1_DCD	GPIO_GPIO23
+#define GPIO_UART1_DSR	GPIO_GPIO6
+
+#define GPIO_UART3_RTS	GPIO_GPIO12
+#define GPIO_UART3_DTR	GPIO_GPIO16
+#define GPIO_UART3_CTS	GPIO_GPIO13
+#define GPIO_UART3_DCD	GPIO_GPIO18
+#define GPIO_UART3_DSR	GPIO_GPIO17
+
+#define GPIO_POWER_BUTTON	GPIO_GPIO0
+#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
+
+#define IRQ_UART1_CTS	IRQ_GPIO15
+#define IRQ_UART1_DCD	GPIO_GPIO23
+#define IRQ_UART1_DSR	GPIO_GPIO6
+#define IRQ_UART3_CTS	GPIO_GPIO13
+#define IRQ_UART3_DCD	GPIO_GPIO18
+#define IRQ_UART3_DSR	GPIO_GPIO17
+
+#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
+#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
+
+
+/*---  PCMCIA  ---*/
+#define GPIO_CF_CD              GPIO_GPIO24
+#define GPIO_CF_IRQ             GPIO_GPIO1
+#define IRQ_GPIO_CF_IRQ         IRQ_GPIO1
+#define IRQ_GPIO_CF_CD          IRQ_GPIO24
+
+/*--- SmartCard ---*/
+#define GPIO_SMART_CARD		GPIO_GPIO10
+#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
+
+// CS3 Latch is write only, a shadow is necessary
+
+#define CS3BUSTYPE unsigned volatile long
+#define CS3_BASE        0xf1000000
+
+#define VCC_5V_EN       0x0001 // For 5V PCMCIA
+#define VCC_3V_EN       0x0002 // FOR 3.3V PCMCIA
+#define EN1             0x0004 // This is only for EPROM's
+#define EN0             0x0008 // Both should be enable for 3.3V or 5V
+#define DISPLAY_ON      0x0010
+#define PCMCIA_BUFF_DIS 0x0020
+#define MQ_RESET        0x0040
+#define PCMCIA_RESET    0x0080
+#define DECT_POWER_ON   0x0100
+#define IRDA_SD         0x0200 // Shutdown for powersave
+#define RS232_ON        0x0400
+#define SD_MEDIAQ       0x0800 // Shutdown for powersave
+#define LED2_ON         0x1000
+#define IRDA_MODE       0x2000 // Fast/Slow IrDA mode
+#define ENABLE_5V       0x4000 // Enable 5V circuit
+#define RESET_SIMCARD   0x8000
+
+#define RS232_ENABLE    0x0440
+#define PCMCIAMASK      0x402f
+
+
+struct simpad_battery {
+	unsigned char ac_status;	/* line connected yes/no */
+	unsigned char status;		/* battery loading yes/no */
+	unsigned char percentage;	/* percentage loaded */
+	unsigned short life;		/* life till empty */
+};
+
+/* These should match the apm_bios.h definitions */
+#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
+#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
+#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
+#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
+
+/* These bitfields are rarely "or'd" together */
+#define SIMPAD_BATT_STATUS_HIGH          0x01
+#define SIMPAD_BATT_STATUS_LOW           0x02
+#define SIMPAD_BATT_STATUS_CRITICAL      0x04
+#define SIMPAD_BATT_STATUS_CHARGING      0x08
+#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
+#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
+#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
+#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
+#define SIMPAD_BATT_STATUS_NOBATT        0x80
+#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
+
+extern int simpad_get_battery(struct simpad_battery* );
+
+#endif // __ASM_ARCH_SIMPAD_H
+
+
+
+
+
+
+
+
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
new file mode 100644
index 00000000000..63755ca5b1b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+		RSRR = RSRR_SWR;
+	}
+}
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
new file mode 100644
index 00000000000..7a5d017b58b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/timex.h
@@ -0,0 +1,12 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/timex.h
+ *
+ * SA1100 architecture timex specifications
+ *
+ * Copyright (C) 1998 
+ */
+
+/*
+ * SA1100 timer
+ */
+#define CLOCK_TICK_RATE		3686400
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
new file mode 100644
index 00000000000..714160b03d7
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/uncompress.h
+ *
+ * (C) 1999 Nicolas Pitre <nico@cam.org>
+ *
+ * Reorganised to be machine independent.
+ */
+
+#include "hardware.h"
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+
+#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = _Ser3UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser1UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser2UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while (!(UART(UTSR1) & UTSR1_TNF))
+		barrier();
+
+	/* send the character out. */
+	UART(UTDR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Nothing to do for these
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
new file mode 100644
index 00000000000..ec8fdc5a360
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index fa0403af7ee..86369a8f0ce 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -16,7 +16,7 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
 #include "generic.h"
@@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
 	else
 		mask = GPIO11_27_MASK(irq);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		GPIO_IRQ_rising_edge |= mask;
 	} else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		GPIO_IRQ_falling_edge |= mask;
 	} else
 		GPIO_IRQ_falling_edge &= ~mask;
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 52ac37d1e23..81848aa9642 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <video/s1d13xxxfb.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 395c39bed7d..28cf3696797 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -20,9 +20,9 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
+#include <mach/jornada720.h>
 #include <asm/hardware/ssp.h>
-#include <asm/arch/jornada720.h>
 
 static DEFINE_SPINLOCK(jornada_ssp_lock);
 static unsigned long jornada_ssp_flags;
@@ -109,12 +109,12 @@ EXPORT_SYMBOL(jornada_ssp_inout);
  * jornada_ssp_start - enable mcu
  *
  */
-int jornada_ssp_start()
+void jornada_ssp_start(void)
 {
 	spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
 	GPCR = GPIO_GPIO25;
 	udelay(50);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_start);
 
@@ -122,11 +122,11 @@ EXPORT_SYMBOL(jornada_ssp_start);
  * jornada_ssp_end - disable mcu and turn off lock
  *
  */
-int jornada_ssp_end()
+void jornada_ssp_end(void)
 {
 	GPSR = GPIO_GPIO25;
 	spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_end);
 
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 07d3a696ae7..0cd52692d2f 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,14 +6,14 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
index ee978898987..64e9b4b11b5 100644
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ b/arch/arm/mach-sa1100/leds-assabet.c
@@ -11,10 +11,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
index 280929be972..cf1e38458b8 100644
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ b/arch/arm/mach-sa1100/leds-badge4.c
@@ -12,7 +12,7 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
index f38eeddbef1..259b48e0be8 100644
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ b/arch/arm/mach-sa1100/leds-cerf.c
@@ -5,7 +5,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index 7e91cc90b5a..2bce137462e 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
index 2d27d76cfc6..0505a1fdcdb 100644
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ b/arch/arm/mach-sa1100/leds-lart.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c
index def090a8738..d50f4eeaa12 100644
--- a/arch/arm/mach-sa1100/leds-simpad.c
+++ b/arch/arm/mach-sa1100/leds-simpad.c
@@ -5,10 +5,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 9f1ed150930..4856a6bd248 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -10,14 +10,14 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/neponset.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/sizes.h>
 
@@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
 	/*
 	 * Install handler for GPIO25.
 	 */
-	set_irq_type(IRQ_GPIO25, IRQT_RISING);
+	set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
 
 	/*
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index c7bf7e0038f..83be1c6c5f8 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,7 +11,7 @@
 
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -143,7 +143,7 @@ static void __init pleb_map_io(void)
 
 	GPDR &= ~GPIO_ETH0_IRQ;
 
-	set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING);
+	set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
 }
 
 MACHINE_START(PLEB, "PLEB")
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 1693d447a22..111cce67ad2 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -27,7 +27,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 8acab7b1e4c..9ccdd09cf69 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,7 +9,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -17,8 +17,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/shannon.h>
+#include <mach/mcp.h>
+#include <mach/shannon.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index a9ae1b581aa..8dd63531795 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -22,8 +22,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/simpad.h>
+#include <mach/mcp.h>
+#include <mach/simpad.h>
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 5a84062f92a..171441f9671 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -18,7 +18,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 06206ceb312..641f361c56f 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -20,7 +20,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
 
 #define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index a9799cb35b7..24c0a4bae85 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -16,7 +16,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define MIN_OSCR_DELTA 2
 
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
new file mode 100644
index 00000000000..0836cb78b29
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/* arch/arm/mach-shark/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+		mov	\rd, #0
+1001:		add	\rd, \rd, #1
+		teq	\rd, #0x10000
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-shark/include/mach/dma.h b/arch/arm/mach-shark/include/mach/dma.h
new file mode 100644
index 00000000000..c0a29bd2a74
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/dma.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-shark/include/mach/dma.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Use only the lowest 4MB, nothing else works.
+ * The rest is not DMAable. See dev /  .properties
+ * in OpenFirmware.
+ */
+#define MAX_DMA_ADDRESS		0xC0400000
+#define MAX_DMA_CHANNELS	8
+#define DMA_ISA_CASCADE         4
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
new file mode 100644
index 00000000000..e2853c0a333
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-shark/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Shark platform
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xe0000000
+
+		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
+		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	43f
+		and	\irqnr, \irqnr, #7
+		teq	\irqnr, #2
+		bne	44f
+43:		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
+		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	44f
+		and	\irqnr, \irqnr, #7
+		add	\irqnr, \irqnr, #8
+44:		teq	\irqstat, #0
+		.endm
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
new file mode 100644
index 00000000000..cb0ee2943c1
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/hardware.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/hardware.h
+ * Copyright (C) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Mapping areas
+ */
+#define IO_BASE			0xe0000000
+
+#else
+
+#define IO_BASE			0
+
+#endif
+
+#define IO_SIZE			0x08000000
+#define IO_START		0x40000000
+#define ROMCARD_SIZE		0x08000000
+#define ROMCARD_START		0x10000000
+
+#define PCIO_BASE		0xe0000000
+
+
+/* defines for the Framebuffer */
+#define FB_START		0x06000000
+#define FB_SIZE			0x01000000
+
+#define UNCACHEABLE_ADDR        0xdf010000
+
+#define SEQUOIA_LED_GREEN       (1<<6)
+#define SEQUOIA_LED_AMBER       (1<<5)
+#define SEQUOIA_LED_BACK        (1<<7)
+
+#define pcibios_assign_all_busses()     1
+
+#define PCIBIOS_MIN_IO          0x6000
+#define PCIBIOS_MIN_MEM         0x50000000
+#define PCIMEM_BASE		0xe8000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
new file mode 100644
index 00000000000..92475922c06
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-shark/include/mach/io.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/io.h
+ * Copyright (C) 1997,1998 Russell King
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
+
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port));			\
+}
+
+#define __mem_pci(addr) (addr)
+
+/*
+ * Translated address IO functions
+ *
+ * IO address has already been translated to a virtual address
+ */
+#define outb_t(v,p)								\
+	(*(volatile unsigned char *)(p) = (v))
+
+#define inb_t(p)								\
+	(*(volatile unsigned char *)(p))
+
+#define outl_t(v,p)								\
+	(*(volatile unsigned long *)(p) = (v))
+
+#define inl_t(p)								\
+	(*(volatile unsigned long *)(p))
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
new file mode 100644
index 00000000000..0586acd7cdd
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-shark/include/mach/irqs.h
+ *
+ * by Alexander Schulz
+ */
+
+#define NR_IRQS			16
+
+#define IRQ_ISA_KEYBOARD	 1
+#define RTC_IRQ			 8
+#define I8042_KBD_IRQ		 1
+#define I8042_AUX_IRQ		12
+#define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
new file mode 100644
index 00000000000..b7874ad9f9f
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-shark/include/mach/memory.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/memory.h
+ * Copyright (c) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     UL(0x08000000)
+
+#ifndef __ASSEMBLY__
+
+static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
+{
+  if (node != 0) return;
+  /* Only the first 4 MB (=1024 Pages) are usable for DMA */
+  zone_size[1] = zone_size[0] - 1024;
+  zone_size[0] = 1024;
+  zhole_size[1] = zhole_size[0];
+  zhole_size[0] = 0;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+	__arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
+
+#endif
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * Cache flushing area
+ */
+#define FLUSH_BASE_PHYS		0x80000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
new file mode 100644
index 00000000000..85aceef6f87
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-shark/include/mach/system.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+
+static void arch_reset(char mode)
+{
+	short temp;
+	local_irq_disable();
+	/* Reset the Machine via pc[3] of the sequoia chipset */
+	outw(0x09,0x24);
+	temp=inw(0x26);
+	temp = temp | (1<<3) | (1<<10);
+	outw(0x09,0x24);
+	outw(temp,0x26);
+
+}
+
+static inline void arch_idle(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
new file mode 100644
index 00000000000..bb6eeaebed8
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-shark/include/mach/timex.h
+ *
+ * by Alexander Schulz
+ */
+
+#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
new file mode 100644
index 00000000000..3725e163341
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/uncompress.h
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-footbridge/include/mach/uncompress.h
+ * Copyright (C) 1996,1997,1998 Russell King
+ */
+
+#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
+
+static inline void putc(int c)
+{
+	int t;
+
+	SERIAL_BASE[0] = c;
+	t=0x10000;
+	while (t--);
+}
+
+static inline void flush(void)
+{
+}
+
+#ifdef DEBUG
+static void putn(unsigned long z)
+{
+	int i;
+	char x;
+
+	putc('0');
+	putc('x');
+	for (i=0;i<8;i++) {
+		x='0'+((z>>((7-i)*4))&0xf);
+		if (x>'9') x=x-'0'+'A'-10;
+		putc(x);
+	}
+}
+
+static void putr()
+{
+	putc('\n');
+	putc('\r');
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
new file mode 100644
index 00000000000..f6c6837c545
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-shark/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 5b0c6af44ec..44b0811b400 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -4,7 +4,7 @@
  * by Alexander Schulz
  *
  * derived from linux/arch/ppc/kernel/i8259.c and:
- * include/asm-arm/arch-ebsa110/irq.h
+ * arch/arm/mach-ebsa110/include/mach/irq.h
  * Copyright (C) 1996-1998 Russell King
  */
 
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 5386a81f796..b1896471aa3 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -21,7 +21,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a7dd09436cb..b638f10411e 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,10 +28,10 @@
 #include <linux/amba/clcd.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/cnt32_to_63.h>
 
-#include <asm/cnt32_to_63.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
new file mode 100644
index 00000000000..b4ac00eacf6
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-versatile/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf1000000	@ virtual base
+		orr	\rx, \rx, #0x001F0000
+		orr	\rx, \rx, #0x00001000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/dma.h b/arch/arm/mach-versatile/include/mach/dma.h
new file mode 100644
index 00000000000..0aabf12c883
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
new file mode 100644
index 00000000000..8c802098058
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-versatile/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Versatile platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
+		mov	\irqnr, #0
+		teq	\irqstat, #0
+		beq	1003f
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+
+@		clz	\irqnr, \irqstat
+@1003:		/* EQ will be set if we reach MAXIRQNUM */
+		.endm
+
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
new file mode 100644
index 00000000000..7aa906c9315
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Versatile boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * PCI space virtual addresses
+ */
+#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
+#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
+
+#if 0
+#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
+#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
+#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
+
+#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
+#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
+#endif
+
+/* CIK guesswork */
+#define PCIBIOS_MIN_IO			0x44000000
+#define PCIBIOS_MIN_MEM			0x50000000
+
+#define pcibios_assign_all_busses()     1
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 00000000000..c0b9dd1d025
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,32 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
new file mode 100644
index 00000000000..216a1312e62
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -0,0 +1,211 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/platform.h>
+
+/* 
+ *  IRQ interrupts definitions are the same as the INT definitions
+ *  held within platform.h
+ */
+#define IRQ_VIC_START		0
+#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
+#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
+#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
+#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
+#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
+#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
+#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
+#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
+#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
+#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
+#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
+#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
+#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
+#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
+#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
+#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
+#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
+#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
+#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
+#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
+#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
+#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
+#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
+#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
+#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
+#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
+#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
+#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
+#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
+#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
+#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
+#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
+#define IRQ_VIC_END		(IRQ_VIC_START + 31)
+
+#define IRQMASK_WDOGINT		INTMASK_WDOGINT
+#define IRQMASK_SOFTINT		INTMASK_SOFTINT
+#define IRQMASK_COMMRx 		INTMASK_COMMRx
+#define IRQMASK_COMMTx 		INTMASK_COMMTx
+#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define IRQMASK_RTCINT 		INTMASK_RTCINT
+#define IRQMASK_SSPINT 		INTMASK_SSPINT
+#define IRQMASK_UARTINT0	INTMASK_UARTINT0
+#define IRQMASK_UARTINT1	INTMASK_UARTINT1
+#define IRQMASK_UARTINT2	INTMASK_UARTINT2
+#define IRQMASK_SCIINT 		INTMASK_SCIINT
+#define IRQMASK_CLCDINT		INTMASK_CLCDINT
+#define IRQMASK_DMAINT 		INTMASK_DMAINT
+#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define IRQMASK_MBXINT 		INTMASK_MBXINT
+#define IRQMASK_GNDINT 		INTMASK_GNDINT
+#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/* 
+ *  FIQ interrupts definitions are the same as the INT definitions.
+ */
+#define FIQ_WDOGINT		INT_WDOGINT
+#define FIQ_SOFTINT		INT_SOFTINT
+#define FIQ_COMMRx		INT_COMMRx
+#define FIQ_COMMTx		INT_COMMTx
+#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
+#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
+#define FIQ_GPIOINT0		INT_GPIOINT0
+#define FIQ_GPIOINT1		INT_GPIOINT1
+#define FIQ_GPIOINT2		INT_GPIOINT2
+#define FIQ_GPIOINT3		INT_GPIOINT3
+#define FIQ_RTCINT		INT_RTCINT
+#define FIQ_SSPINT		INT_SSPINT
+#define FIQ_UARTINT0		INT_UARTINT0
+#define FIQ_UARTINT1		INT_UARTINT1
+#define FIQ_UARTINT2		INT_UARTINT2
+#define FIQ_SCIINT		INT_SCIINT
+#define FIQ_CLCDINT		INT_CLCDINT
+#define FIQ_DMAINT		INT_DMAINT
+#define FIQ_PWRFAILINT 		INT_PWRFAILINT
+#define FIQ_MBXINT		INT_MBXINT
+#define FIQ_GNDINT		INT_GNDINT
+#define FIQ_VICSOURCE21		INT_VICSOURCE21
+#define FIQ_VICSOURCE22		INT_VICSOURCE22
+#define FIQ_VICSOURCE23		INT_VICSOURCE23
+#define FIQ_VICSOURCE24		INT_VICSOURCE24
+#define FIQ_VICSOURCE25		INT_VICSOURCE25
+#define FIQ_VICSOURCE26		INT_VICSOURCE26
+#define FIQ_VICSOURCE27		INT_VICSOURCE27
+#define FIQ_VICSOURCE28		INT_VICSOURCE28
+#define FIQ_VICSOURCE29		INT_VICSOURCE29
+#define FIQ_VICSOURCE30		INT_VICSOURCE30
+#define FIQ_VICSOURCE31		INT_VICSOURCE31
+
+
+#define FIQMASK_WDOGINT		INTMASK_WDOGINT
+#define FIQMASK_SOFTINT		INTMASK_SOFTINT
+#define FIQMASK_COMMRx 		INTMASK_COMMRx
+#define FIQMASK_COMMTx 		INTMASK_COMMTx
+#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define FIQMASK_RTCINT 		INTMASK_RTCINT
+#define FIQMASK_SSPINT 		INTMASK_SSPINT
+#define FIQMASK_UARTINT0	INTMASK_UARTINT0
+#define FIQMASK_UARTINT1	INTMASK_UARTINT1
+#define FIQMASK_UARTINT2	INTMASK_UARTINT2
+#define FIQMASK_SCIINT 		INTMASK_SCIINT
+#define FIQMASK_CLCDINT		INTMASK_CLCDINT
+#define FIQMASK_DMAINT 		INTMASK_DMAINT
+#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define FIQMASK_MBXINT 		INTMASK_MBXINT
+#define FIQMASK_GNDINT 		INTMASK_GNDINT
+#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/*
+ * Secondary interrupt controller
+ */
+#define IRQ_SIC_START		32
+#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
+#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
+#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
+#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
+#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
+#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
+#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
+#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
+#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
+#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
+#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
+#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
+#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
+#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
+#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
+#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
+#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
+#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
+#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
+#define IRQ_SIC_END		63
+
+#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
+#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
+#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
+#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
+#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
+#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
+#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
+#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
+#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
+#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
+#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
+#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
+#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
+#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
+#define SIC_IRQMASK_USB		SIC_INTMASK_USB
+#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
+#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
+#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
+#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
+
+#define NR_IRQS			64
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
new file mode 100644
index 00000000000..b6315c0602a
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
new file mode 100644
index 00000000000..27cbe6a3f22
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -0,0 +1,510 @@
+/*
+ * arch/arm/mach-versatile/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __address_h
+#define __address_h                     1
+
+/*
+ * Memory definitions
+ */
+#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define VERSATILE_BOOT_ROM_HI          0x30000000
+#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
+#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
+
+#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
+#define VERSATILE_SSRAM_SIZE           SZ_2M
+
+#define VERSATILE_FLASH_BASE           0x34000000
+#define VERSATILE_FLASH_SIZE           SZ_64M
+
+/* 
+ *  SDRAM
+ */
+#define VERSATILE_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define VERSATILE_SYS_ID_OFFSET               0x00
+#define VERSATILE_SYS_SW_OFFSET               0x04
+#define VERSATILE_SYS_LED_OFFSET              0x08
+#define VERSATILE_SYS_OSC0_OFFSET             0x0C
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x10
+#define VERSATILE_SYS_OSC2_OFFSET             0x14
+#define VERSATILE_SYS_OSC3_OFFSET             0x18
+#define VERSATILE_SYS_OSC4_OFFSET             0x1C
+#elif defined(CONFIG_MACH_VERSATILE_AB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x1C
+#endif
+
+#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
+
+#define VERSATILE_SYS_LOCK_OFFSET             0x20
+#define VERSATILE_SYS_100HZ_OFFSET            0x24
+#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
+#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
+#define VERSATILE_SYS_FLAGS_OFFSET            0x30
+#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
+#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
+#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
+#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
+#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
+#define VERSATILE_SYS_PCICTL_OFFSET           0x44
+#define VERSATILE_SYS_MCI_OFFSET              0x48
+#define VERSATILE_SYS_FLASH_OFFSET            0x4C
+#define VERSATILE_SYS_CLCD_OFFSET             0x50
+#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
+#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
+#define VERSATILE_SYS_24MHz_OFFSET            0x5C
+#define VERSATILE_SYS_MISC_OFFSET             0x60
+#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
+#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
+#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
+#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
+#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
+
+#define VERSATILE_SYS_BASE                    0x10000000
+#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
+#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
+#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
+#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
+#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
+#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
+#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
+#endif
+
+#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
+#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
+#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
+#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
+#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
+#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
+#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
+#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
+#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
+#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
+#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
+#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
+#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
+#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
+#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
+#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
+#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
+#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
+#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
+#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
+#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for VERSATILE_SYS_RESET_CTRL
+ */
+#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
+#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
+#define VERSATILE_SYS_CTRL_RESET_POR          0x05
+#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
+
+#define VERSATILE_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * VERSATILE_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * VERSATILE_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
+#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * VERSATILE_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
+#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
+#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
+#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
+#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
+#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
+#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
+#define VERSATILE_SCI1_BASE            0x1000A000
+#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
+	/* 0x1000C000 - 0x1000CFFF = reserved */
+#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
+#define VERSATILE_USB_BASE             0x10020000	/* USB */
+	/* 0x10030000 - 0x100FFFFF = reserved */
+#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
+#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
+#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
+#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
+#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
+#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
+                                                /* 0x10000000 - 0x100FFFFF */
+#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
+#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
+#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
+#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
+#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
+#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
+#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
+#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
+#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
+#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
+	/* 0x101E9000 - reserved */
+#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
+#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
+#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
+#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
+#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
+
+#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
+#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
+#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
+
+/* PCI space */
+#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
+#define VERSATILE_PCI_CFG_BASE	       0x42000000
+#define VERSATILE_PCI_MEM_BASE0        0x44000000
+#define VERSATILE_PCI_MEM_BASE1        0x50000000
+#define VERSATILE_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define VERSATILE_PCI_BASE_SIZE	       0x01000000
+#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
+#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define VERSATILE_DOC_BASE             0x2C000000
+#define VERSATILE_DOC_SIZE             (16 << 20)
+#define VERSATILE_DOC_PAGE_SIZE        512
+#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define VERSATILE_SYS_LED0             (1 << 0)
+#define VERSATILE_SYS_LED1             (1 << 1)
+#define VERSATILE_SYS_LED2             (1 << 2)
+#define VERSATILE_SYS_LED3             (1 << 3)
+#define VERSATILE_SYS_LED4             (1 << 4)
+#define VERSATILE_SYS_LED5             (1 << 5)
+#define VERSATILE_SYS_LED6             (1 << 6)
+#define VERSATILE_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  VERSATILE_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
+#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
+#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Interrupt Controller - control registers
+ * ------------------------------------------------------------------------
+ * 
+ *  Offsets from interrupt controller base 
+ * 
+ *  System Controller interrupt controller base is
+ * 
+ * 	VERSATILE_IC_BASE
+ * 
+ *  Core Module interrupt controller base is
+ * 
+ * 	VERSATILE_SYS_IC 
+ * 
+ */
+/* VIC definitions in include/asm-arm/hardware/vic.h */
+
+#define SIC_IRQ_STATUS                  0
+#define SIC_IRQ_RAW_STATUS              0x04
+#define SIC_IRQ_ENABLE                  0x08
+#define SIC_IRQ_ENABLE_SET              0x08
+#define SIC_IRQ_ENABLE_CLEAR            0x0C
+#define SIC_INT_SOFT_SET                0x10
+#define SIC_INT_SOFT_CLEAR              0x14
+#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
+#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
+#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (primary)
+ * ------------------------------------------------------------------------
+ */
+
+#define INT_WDOGINT                     0	/* Watchdog timer */
+#define INT_SOFTINT                     1	/* Software interrupt */
+#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
+#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
+#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
+#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
+#define INT_GPIOINT0                    6	/* GPIO 0 */
+#define INT_GPIOINT1                    7	/* GPIO 1 */
+#define INT_GPIOINT2                    8	/* GPIO 2 */
+#define INT_GPIOINT3                    9	/* GPIO 3 */
+#define INT_RTCINT                      10	/* Real Time Clock */
+#define INT_SSPINT                      11	/* Synchronous Serial Port */
+#define INT_UARTINT0                    12	/* UART 0 on development chip */
+#define INT_UARTINT1                    13	/* UART 1 on development chip */
+#define INT_UARTINT2                    14	/* UART 2 on development chip */
+#define INT_SCIINT                      15	/* Smart Card Interface */
+#define INT_CLCDINT                     16	/* CLCD controller */
+#define INT_DMAINT                      17	/* DMA controller */
+#define INT_PWRFAILINT                  18	/* Power failure */
+#define INT_MBXINT                      19	/* Graphics processor */
+#define INT_GNDINT                      20	/* Reserved */
+	/* External interrupt signals from logic tiles or secondary controller */
+#define INT_VICSOURCE21                 21	/* Disk on Chip */
+#define INT_VICSOURCE22                 22	/* MCI0A */
+#define INT_VICSOURCE23                 23	/* MCI1A */
+#define INT_VICSOURCE24                 24	/* AACI */
+#define INT_VICSOURCE25                 25	/* Ethernet */
+#define INT_VICSOURCE26                 26	/* USB */
+#define INT_VICSOURCE27                 27	/* PCI 0 */
+#define INT_VICSOURCE28                 28	/* PCI 1 */
+#define INT_VICSOURCE29                 29	/* PCI 2 */
+#define INT_VICSOURCE30                 30	/* PCI 3 */
+#define INT_VICSOURCE31                 31	/* SIC source */
+
+/* 
+ *  Interrupt bit positions
+ * 
+ */
+#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
+#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
+#define INTMASK_COMMRx                  (1 << INT_COMMRx)
+#define INTMASK_COMMTx                  (1 << INT_COMMTx)
+#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
+#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
+#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
+#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
+#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
+#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
+#define INTMASK_RTCINT                  (1 << INT_RTCINT)
+#define INTMASK_SSPINT                  (1 << INT_SSPINT)
+#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
+#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
+#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
+#define INTMASK_SCIINT                  (1 << INT_SCIINT)
+#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
+#define INTMASK_DMAINT                  (1 << INT_DMAINT)
+#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
+#define INTMASK_MBXINT                  (1 << INT_MBXINT)
+#define INTMASK_GNDINT                  (1 << INT_GNDINT)
+#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
+#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
+#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
+#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
+#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
+#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
+#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
+#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
+#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
+#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
+#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
+
+
+#define VERSATILE_SC_VALID_INT               0x003FFFFF
+
+#define MAXIRQNUM                       31
+#define MAXFIQNUM                       31
+#define MAXSWINUM                       31
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (secondary)
+ * ------------------------------------------------------------------------
+ */
+#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
+#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
+#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
+#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
+#define SIC_INT_SCI3                    5	/* Smart Card interface */
+#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
+#define SIC_INT_CLCD                    7	/* Character LCD */
+#define SIC_INT_TOUCH                   8	/* Touchscreen */
+#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
+	/* 10:20 - reserved */
+#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
+#define SIC_INT_MMCI0A                  22	/* MMC 0A */
+#define SIC_INT_MMCI1A                  23	/* MMC 1A */
+#define SIC_INT_AACI                    24	/* Audio Codec */
+#define SIC_INT_ETH                     25	/* Ethernet controller */
+#define SIC_INT_USB                     26	/* USB controller */
+#define SIC_INT_PCI0                    27
+#define SIC_INT_PCI1                    28
+#define SIC_INT_PCI2                    29
+#define SIC_INT_PCI3                    30
+
+
+#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
+#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
+#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
+#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
+#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
+#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
+#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
+#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
+#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
+#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
+#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
+#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
+#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
+#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
+#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
+#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
+#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
+#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
+#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      VERSATILE_FLASH_BASE
+#define FLASH_SIZE                      VERSATILE_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      VERSATILE_BOOT_ROM_HI
+#define EPROM_SIZE                      VERSATILE_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK	0
+#define VERSATILE_TIMCLK	1
+
+#define VERSATILE_TIMER1_EnSel	15
+#define VERSATILE_TIMER2_EnSel	17
+#define VERSATILE_TIMER3_EnSel	19
+#define VERSATILE_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define VERSATILE_CSR_BASE             0x10000000
+#define VERSATILE_CSR_SIZE             0x10000000
+
+#ifdef CONFIG_MACH_VERSATILE_AB
+/*
+ * IB2 Versatile/AB expansion board definitions
+ */
+#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
+#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
+
+/* VICINTSOURCE27 */
+#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
+#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
+#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
+
+#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
+#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
+#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
+#endif
+
+#endif
+
+/* 	END */
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
new file mode 100644
index 00000000000..91fa559c7cc
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	u32 val;
+
+	val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
+	val |= 0x105;
+
+	__raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
+	__raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
+	__raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
+}
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
new file mode 100644
index 00000000000..426199b1add
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/timex.h
+ *
+ *  Versatile architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
new file mode 100644
index 00000000000..3dd0048afb3
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
new file mode 100644
index 00000000000..427e3612db5
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index ca829015943..36f23f89650 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -22,7 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index b257ef78ef4..76375c64413 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index be439bb9d45..1725f019fc8 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 3a6c8ec34cd..ed15f876c72 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -187,7 +187,7 @@ config CPU_ARM926T
 		ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
 		ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
 		ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
-		ARCH_NS9XXX || ARCH_DAVINCI
+		ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
 	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
 		ARCH_OMAP730 || ARCH_OMAP16XX || \
 		ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
@@ -742,3 +742,11 @@ config CACHE_L2X0
 	select OUTER_CACHE
 	help
 	  This option enables the L2x0 PrimeCell.
+
+config CACHE_XSC3L2
+	bool "Enable the L2 cache on XScale3"
+	depends on CPU_XSC3
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the L2 cache on XScale3.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index f64b92557b1..2e27a8c8372 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -76,3 +76,5 @@ obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
+obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
+
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 20eec4ba173..7b5a25d8157 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -14,7 +14,7 @@
 
 #include <linux/init.h>
 #include <asm/cacheflush.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <plat/cache-feroceon-l2.h>
 
 
 /*
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index e1994788cf0..3b3639eb7ca 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index b2908063ed6..33926c9fcda 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 9bcabd86c6f..51a9b0b273b 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -13,7 +13,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
new file mode 100644
index 00000000000..158bd96763d
--- /dev/null
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -0,0 +1,182 @@
+/*
+ * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+#define CR_L2	(1 << 26)
+
+#define CACHE_LINE_SIZE		32
+#define CACHE_LINE_SHIFT	5
+#define CACHE_WAY_PER_SET	8
+
+#define CACHE_WAY_SIZE(l2ctype)	(8192 << (((l2ctype) >> 8) & 0xf))
+#define CACHE_SET_SIZE(l2ctype)	(CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT)
+
+static inline int xsc3_l2_present(void)
+{
+	unsigned long l2ctype;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	return !!(l2ctype & 0xf8);
+}
+
+static inline void xsc3_l2_clean_mva(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
+}
+
+static inline void xsc3_l2_clean_pa(unsigned long addr)
+{
+	xsc3_l2_clean_mva(__phys_to_virt(addr));
+}
+
+static inline void xsc3_l2_inv_mva(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
+}
+
+static inline void xsc3_l2_inv_pa(unsigned long addr)
+{
+	xsc3_l2_inv_mva(__phys_to_virt(addr));
+}
+
+static inline void xsc3_l2_inv_all(void)
+{
+	unsigned long l2ctype, set_way;
+	int set, way;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
+		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
+			set_way = (way << 29) | (set << 5);
+			__asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way));
+		}
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
+{
+	if (start == 0 && end == -1ul) {
+		xsc3_l2_inv_all();
+		return;
+	}
+
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1));
+		xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
+		xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start != end) {
+		xsc3_l2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		xsc3_l2_clean_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+/*
+ * optimize L2 flush all operation by set/way format
+ */
+static inline void xsc3_l2_flush_all(void)
+{
+	unsigned long l2ctype, set_way;
+	int set, way;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
+		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
+			set_way = (way << 29) | (set << 5);
+			__asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way));
+		}
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
+{
+	if (start == 0 && end == -1ul) {
+		xsc3_l2_flush_all();
+		return;
+	}
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		xsc3_l2_clean_pa(start);
+		xsc3_l2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static int __init xsc3_l2_init(void)
+{
+	if (!cpu_is_xsc3() || !xsc3_l2_present())
+		return 0;
+
+	if (!(get_cr() & CR_L2)) {
+		pr_info("XScale3 L2 cache enabled.\n");
+		adjust_cr(CR_L2, CR_L2);
+		xsc3_l2_inv_all();
+	}
+
+	outer_cache.inv_range = xsc3_l2_inv_range;
+	outer_cache.clean_range = xsc3_l2_clean_range;
+	outer_cache.flush_range = xsc3_l2_flush_range;
+
+	return 0;
+}
+core_initcall(xsc3_l2_init);
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 333a82a3717..db7b3e38ef1 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -274,6 +274,11 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
+	void *memory;
+
+	if (dma_alloc_from_coherent(dev, size, handle, &memory))
+		return memory;
+
 	if (arch_is_coherent()) {
 		void *virt;
 
@@ -362,6 +367,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 
 	WARN_ON(irqs_disabled());
 
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+
 	if (arch_is_coherent()) {
 		kfree(cpu_addr);
 		return;
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
index 1e560218950..c8c0c4b0f0a 100644
--- a/arch/arm/mm/discontig.c
+++ b/arch/arm/mm/discontig.c
@@ -21,26 +21,24 @@
  * Our node_data structure for discontiguous memory.
  */
 
-static bootmem_data_t node_bootmem_data[MAX_NUMNODES];
-
 pg_data_t discontig_node_data[MAX_NUMNODES] = {
-  { .bdata = &node_bootmem_data[0] },
-  { .bdata = &node_bootmem_data[1] },
-  { .bdata = &node_bootmem_data[2] },
-  { .bdata = &node_bootmem_data[3] },
+  { .bdata = &bootmem_node_data[0] },
+  { .bdata = &bootmem_node_data[1] },
+  { .bdata = &bootmem_node_data[2] },
+  { .bdata = &bootmem_node_data[3] },
 #if MAX_NUMNODES == 16
-  { .bdata = &node_bootmem_data[4] },
-  { .bdata = &node_bootmem_data[5] },
-  { .bdata = &node_bootmem_data[6] },
-  { .bdata = &node_bootmem_data[7] },
-  { .bdata = &node_bootmem_data[8] },
-  { .bdata = &node_bootmem_data[9] },
-  { .bdata = &node_bootmem_data[10] },
-  { .bdata = &node_bootmem_data[11] },
-  { .bdata = &node_bootmem_data[12] },
-  { .bdata = &node_bootmem_data[13] },
-  { .bdata = &node_bootmem_data[14] },
-  { .bdata = &node_bootmem_data[15] },
+  { .bdata = &bootmem_node_data[4] },
+  { .bdata = &bootmem_node_data[5] },
+  { .bdata = &bootmem_node_data[6] },
+  { .bdata = &bootmem_node_data[7] },
+  { .bdata = &bootmem_node_data[8] },
+  { .bdata = &bootmem_node_data[9] },
+  { .bdata = &bootmem_node_data[10] },
+  { .bdata = &bootmem_node_data[11] },
+  { .bdata = &bootmem_node_data[12] },
+  { .bdata = &bootmem_node_data[13] },
+  { .bdata = &bootmem_node_data[14] },
+  { .bdata = &bootmem_node_data[15] },
 #endif
 };
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index fbfa2605844..a8ec97b4752 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte, entry;
-	int ret = 0;
+	int ret;
 
 	pgd = pgd_offset(vma->vm_mm, address);
 	if (pgd_none(*pgd))
@@ -55,15 +55,19 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	entry = *pte;
 
 	/*
+	 * If this page is present, it's actually being shared.
+	 */
+	ret = pte_present(entry);
+
+	/*
 	 * If this page isn't present, or is already setup to
 	 * fault (ie, is old), we can safely ignore any issues.
 	 */
-	if (pte_present(entry) && pte_val(entry) & shared_pte_mask) {
+	if (ret && pte_val(entry) & shared_pte_mask) {
 		flush_cache_page(vma, address, pte_pfn(entry));
 		pte_val(entry) &= ~shared_pte_mask;
 		set_pte_at(vma->vm_mm, address, pte, entry);
 		flush_tlb_page(vma, address);
-		ret = 1;
 	}
 	pte_unmap(pte);
 	return ret;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b657f1719af..30a69d67d67 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -156,9 +156,9 @@ static int __init check_initrd(struct meminfo *mi)
 	}
 
 	if (initrd_node == -1) {
-		printk(KERN_ERR "initrd (0x%08lx - 0x%08lx) extends beyond "
+		printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond "
 		       "physical memory - disabling initrd\n",
-		       phys_initrd_start, end);
+		       phys_initrd_start, phys_initrd_size);
 		phys_initrd_start = phys_initrd_size = 0;
 	}
 #endif
@@ -239,25 +239,33 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
 			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
 
+	/*
+	 * Reserve any special node zero regions.
+	 */
+	if (node == 0)
+		reserve_node_zero(pgdat);
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*
 	 * If the initrd is in this node, reserve its memory.
 	 */
 	if (node == initrd_node) {
-		reserve_bootmem_node(pgdat, phys_initrd_start,
-				     phys_initrd_size, BOOTMEM_DEFAULT);
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
+		int res = reserve_bootmem_node(pgdat, phys_initrd_start,
+				     phys_initrd_size, BOOTMEM_EXCLUSIVE);
+
+		if (res == 0) {
+			initrd_start = __phys_to_virt(phys_initrd_start);
+			initrd_end = initrd_start + phys_initrd_size;
+		} else {
+			printk(KERN_ERR
+				"INITRD: 0x%08lx+0x%08lx overlaps in-use "
+				"memory region - disabling initrd\n",
+				phys_initrd_start, phys_initrd_size);
+		}
 	}
 #endif
 
 	/*
-	 * Finally, reserve any node zero regions.
-	 */
-	if (node == 0)
-		reserve_node_zero(pgdat);
-
-	/*
 	 * initialise the zones within this node.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
@@ -284,7 +292,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	 */
 	arch_adjust_zones(node, zone_size, zhole_size);
 
-	free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+	free_area_init_node(node, zone_size, start_pfn, zhole_size);
 
 	return end_pfn;
 }
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 303a7ff6bfd..b81dbf9ffb7 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -259,7 +259,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
  * caller shouldn't need to know that small detail.
  *
  * 'flags' are the extra L_PTE_ flags that you want to specify for this
- * mapping.  See include/asm-arm/proc-armv/pgtable.h for more information.
+ * mapping.  See <asm/pgtable.h> for more information.
  */
 void __iomem *
 __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 2d6d682c206..a713e40e1f1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -211,6 +211,12 @@ static struct mem_type mem_types[] = {
 				  PMD_SECT_TEX(1),
 		.domain		= DOMAIN_IO,
 	},
+	[MT_DEVICE_WC] = {	/* ioremap_wc */
+		.prot_pte	= PROT_PTE_DEVICE,
+		.prot_l1	= PMD_TYPE_TABLE,
+		.prot_sect	= PROT_SECT_DEVICE,
+		.domain		= DOMAIN_IO,
+	},
 	[MT_CACHECLEAN] = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 		.domain    = DOMAIN_KERNEL,
@@ -273,6 +279,20 @@ static void __init build_mem_type_table(void)
 	}
 
 	/*
+	 * On non-Xscale3 ARMv5-and-older systems, use CB=01
+	 * (Uncached/Buffered) for ioremap_wc() mappings.  On XScale3
+	 * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable
+	 * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
+	 */
+	if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
+		mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+	} else {
+		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE;
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+	}
+
+	/*
 	 * ARMv5 and lower, bit 4 must be set for page tables.
 	 * (was: cache "update-able on write" bit on ARM610)
 	 * However, Xscale cores require this bit to be cleared.
@@ -568,6 +588,55 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 		create_mapping(io_desc + i);
 }
 
+static int __init check_membank_valid(struct membank *mb)
+{
+	/*
+	 * Check whether this memory region has non-zero size.
+	 */
+	if (mb->size == 0)
+		return 0;
+
+	/*
+	 * Check whether this memory region would entirely overlap
+	 * the vmalloc area.
+	 */
+	if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
+		printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+			"(vmalloc region overlap).\n",
+			mb->start, mb->start + mb->size - 1);
+		return 0;
+	}
+
+	/*
+	 * Check whether this memory region would partially overlap
+	 * the vmalloc area.
+	 */
+	if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
+	    phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
+		unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
+
+		printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+			"to -%.8lx (vmalloc region overlap).\n",
+			mb->start, mb->start + mb->size - 1,
+			mb->start + newsize - 1);
+		mb->size = newsize;
+	}
+
+	return 1;
+}
+
+static void __init sanity_check_meminfo(struct meminfo *mi)
+{
+	int i;
+	int j;
+
+	for (i = 0, j = 0; i < mi->nr_banks; i++) {
+		if (check_membank_valid(&mi->bank[i]))
+			mi->bank[j++] = mi->bank[i];
+	}
+	mi->nr_banks = j;
+}
+
 static inline void prepare_page_table(struct meminfo *mi)
 {
 	unsigned long addr;
@@ -753,6 +822,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
 	void *zero_page;
 
 	build_mem_type_table();
+	sanity_check_meminfo(mi);
 	prepare_page_table(mi);
 	bootmem_init(mi);
 	devicemaps_init(mdesc);
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index d64f8e6f75a..eda733d3045 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -231,7 +231,7 @@ cpu_arm720_name:
 		.align
 
 /*
- * See linux/include/asm-arm/procinfo.h for a definition of this structure.
+ * See <asm/procinfo.h> for a definition of this structure.
  */
 	
 		.section ".proc.info.init", #alloc, #execinstr
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 1a3d63df8e9..551244d5ca1 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -15,6 +15,7 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
+#include "proc-macros.S"
 
 /* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
 #define CACHE_DLINESIZE	16
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 82d579ac9b9..6168c6160de 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -17,6 +17,7 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
+#include "proc-macros.S"
 
 /*
  * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 9818195dbf1..bbe10576c86 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -18,7 +18,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index c5fe27ad289..871ba018252 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -23,7 +23,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 3533741a76f..7bd9e7197f6 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/page.h>
@@ -52,11 +52,6 @@
 #define CACHESIZE	32768
 
 /*
- * Run with L2 enabled.
- */
-#define L2_CACHE_ENABLE	1
-
-/*
  * This macro is used to wait for a CP15 write and is needed when we
  * have to ensure that the last operation to the coprocessor was
  * completed before continuing with operation.
@@ -265,12 +260,9 @@ ENTRY(xsc3_dma_inv_range)
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	tst	r1, #CACHELINESIZE - 1
 	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D line
-	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 line
 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D line
-	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -288,7 +280,6 @@ ENTRY(xsc3_dma_inv_range)
 ENTRY(xsc3_dma_clean_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -306,8 +297,6 @@ ENTRY(xsc3_dma_clean_range)
 ENTRY(xsc3_dma_flush_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
-	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -347,9 +336,7 @@ ENTRY(cpu_xsc3_switch_mm)
 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
-#ifdef L2_CACHE_ENABLE
 	orr	r0, r0, #0x18			@ cache the page table in L2
-#endif
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	cpwait_ret lr, ip
@@ -378,12 +365,10 @@ ENTRY(cpu_xsc3_set_pte_ext)
 	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
 						@ combined with user -> user r/w
 
-#if L2_CACHE_ENABLE
 	@ If it's cacheable, it needs to be in L2 also.
 	eor	ip, r1, #L_PTE_CACHEABLE
 	tst	ip, #L_PTE_CACHEABLE
 	orreq	r2, r2, #PTE_EXT_TEX(0x5)
-#endif
 
 	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
 	movne	r2, #0				@ no -> fault
@@ -408,9 +393,7 @@ __xsc3_setup:
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
-#if L2_CACHE_ENABLE
 	orr	r4, r4, #0x18			@ cache the page table in L2
-#endif
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 
 	mov	r0, #0				@ don't allow CP access
@@ -418,9 +401,7 @@ __xsc3_setup:
 
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
 	and	r0, r0, #2			@ preserve bit P bit setting
-#if L2_CACHE_ENABLE
 	orr	r0, r0, #(1 << 10)		@ enable L2 for LLR cache
-#endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 
 	adr	r5, xsc3_crval
@@ -429,9 +410,6 @@ __xsc3_setup:
 	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
 	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
 						@ ...I Z..S .... .... (uc)
-#if L2_CACHE_ENABLE
-	orr 	r0, r0, #0x04000000		@ L2 enable
-#endif
 	mov	pc, lr
 
 	.size	__xsc3_setup, . - __xsc3_setup
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 4a4d02c0911..386cbd13eaf 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -69,7 +69,7 @@ typedef union tagFPREG {
  * This structure is exported to user space.  Do not re-order.
  * Only add new stuff to the end, and do not change the size of
  * any element.  Elements of this structure are used by user
- * space, and must match struct user_fp in include/asm-arm/user.h.
+ * space, and must match struct user_fp in <asm/user.h>.
  * We include the byte offsets below for documentation purposes.
  *
  * The size of this structure and FPREG are checked by fpmodule.c
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 4458705021e..92db6e035c6 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index 53c5e9a52eb..f7242082161 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <asm/hardware/iop3xx.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
 #include <asm/hardware/iop_adma.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index e99909bdba7..6dcbcc4ad41 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -25,9 +25,8 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index 498675d028d..39dcfb4bdc7 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index d9bc15a69e5..54708bf9cb1 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -21,10 +21,9 @@
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/pci.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 
 // #define DEBUG
 
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6fe481ff4fd..c53fefb6aac 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,13 +18,13 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static unsigned long ticks_per_jiffy;
 static unsigned long ticks_per_usec;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 1aa86fd60d7..0a38f0b396e 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -37,9 +37,8 @@
 #include <linux/proc_fs.h>
 #include <linux/semaphore.h>
 #include <linux/string.h>
-#include <linux/version.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 4a7736717d8..733e0acac91 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/bug.h>
 
 static struct mxc_gpio_port *mxc_gpio_ports;
@@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	void __iomem *reg = port->base;
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQT_BOTHEDGE */
+	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
 		return -EINVAL;
 	}
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
new file mode 100644
index 00000000000..61e66dac90e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
+
+/* external interrupt multiplexer */
+#define MXC_EXP_IO_BASE		(MXC_GPIO_BASE + MXC_MAX_GPIO_LINES)
+
+#define MXC_VIRTUAL_INTS_BASE	(MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
+#define MXC_SDIO1_CARD_IRQ	MXC_VIRTUAL_INTS_BASE
+#define MXC_SDIO2_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 1)
+#define MXC_SDIO3_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 2)
+
+#define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
+				MXC_MAX_VIRTUAL_INTS)
+
+/*
+ * MXC UART EVB board level configurations
+ */
+
+#define MXC_LL_EXTUART_PADDR	(CS4_BASE_ADDR + 0x20000)
+#define MXC_LL_EXTUART_VADDR	(CS4_BASE_ADDR_VIRT + 0x20000)
+#define MXC_LL_EXTUART_16BIT_BUS
+
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * @name Memory Size parameters
+ */
+
+/*
+ * Size of SDRAM memory
+ */
+#define SDRAM_MEM_SIZE          SZ_128M
+
+/*
+ * PBC Controller parameters
+ */
+
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xEB000000
+#define PBC_REG_ADDR(offset)    (PBC_BASE_ADDRESS + (offset))
+
+/*
+ * PBC Interupt name definitions
+ */
+#define PBC_GPIO1_0  0
+#define PBC_GPIO1_1  1
+#define PBC_GPIO1_2  2
+#define PBC_GPIO1_3  3
+#define PBC_GPIO1_4  4
+#define PBC_GPIO1_5  5
+
+#define PBC_INTR_MAX_NUM 6
+#define PBC_INTR_SHARED_MAX_NUM 8
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 2 set address.
+ */
+#define PBC_BCTRL2_SET_REG      PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 2 clear address.
+ */
+#define PBC_BCTRL2_CLEAR_REG    PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL3_SET_REG      PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 clear address.
+ */
+#define PBC_BCTRL3_CLEAR_REG    PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL4_SET_REG      PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 4 clear address.
+ */
+#define PBC_BCTRL4_CLEAR_REG    PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
+/*PBC_ADDR_SH
+ * PBC Board status register 1.
+ */
+#define PBC_BSTAT1_REG          PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
+/*
+ * PBC Board interrupt status register.
+ */
+#define PBC_INTSTATUS_REG       PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
+/*
+ * PBC Board interrupt current status register.
+ */
+#define PBC_INTCURR_STATUS_REG  PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
+/*
+ * PBC Interrupt mask register set address.
+ */
+#define PBC_INTMASK_SET_REG     PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
+/*
+ * PBC Interrupt mask register clear address.
+ */
+#define PBC_INTMASK_CLEAR_REG   PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
+/*
+ * External UART A.
+ */
+#define PBC_SC16C652_UARTA_REG  PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Status.
+ */
+#define PBC_UART_STATUS_REG     PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Control Set.
+ */
+#define PBC_UCTRL_SET_REG       PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Control Clear.
+ */
+#define PBC_UCTRL_CLR_REG       PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller IO base address.
+ */
+#define PBC_CS8900A_IOBASE_REG  PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller Memory base address.
+ */
+#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller DMA base address.
+ */
+#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
+
+/* PBC Board Version Register bit definition */
+#define PBC_VERSION_ADS         0x8000	/* Bit15=1 means version for ads */
+#define PBC_VERSION_EVB_REVB    0x4000	/* BIT14=1 means version for evb revb */
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_ERST         0x0001	/* Ethernet Reset */
+#define PBC_BCTRL1_URST         0x0002	/* Reset External UART controller */
+#define PBC_BCTRL1_FRST         0x0004	/* FEC Reset */
+#define PBC_BCTRL1_ESLEEP       0x0010	/* Enable ethernet Sleep */
+#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
+
+/* PBC Board Control Register 2 bit definitions */
+#define PBC_BCTRL2_VCC_EN       0x0004	/*   Enable VCC */
+#define PBC_BCTRL2_VPP_EN       0x0008	/*   Enable Vpp */
+#define PBC_BCTRL2_ATAFEC_EN    0X0010
+#define PBC_BCTRL2_ATAFEC_SEL   0X0020
+#define PBC_BCTRL2_ATA_EN       0X0040
+#define PBC_BCTRL2_IRDA_SD      0X0080
+#define PBC_BCTRL2_IRDA_EN      0X0100
+#define PBC_BCTRL2_CCTL10       0X0200
+#define PBC_BCTRL2_CCTL11       0X0400
+
+/* PBC Board Control Register 3 bit definitions */
+#define PBC_BCTRL3_HSH_EN       0X0020
+#define PBC_BCTRL3_FSH_MOD      0X0040
+#define PBC_BCTRL3_OTG_HS_EN    0X0080
+#define PBC_BCTRL3_OTG_VBUS_EN  0X0100
+#define PBC_BCTRL3_FSH_VBUS_EN  0X0200
+#define PBC_BCTRL3_USB_OTG_ON   0X0800
+#define PBC_BCTRL3_USB_FSH_ON   0X1000
+
+/* PBC Board Control Register 4 bit definitions */
+#define PBC_BCTRL4_REGEN_SEL    0X0001
+#define PBC_BCTRL4_USER_OFF     0X0002
+#define PBC_BCTRL4_VIB_EN       0X0004
+#define PBC_BCTRL4_PWRGT1_EN    0X0008
+#define PBC_BCTRL4_PWRGT2_EN    0X0010
+#define PBC_BCTRL4_STDBY_PRI    0X0020
+
+#ifndef __ASSEMBLY__
+/*
+ * Enumerations for SD cards and memory stick card. This corresponds to
+ * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
+ */
+enum mxc_card_no {
+	MXC_CARD_SD2 = 0,
+	MXC_CARD_SD3,
+	MXC_CARD_MS,
+	MXC_CARD_SD1,
+	MXC_CARD_MIN = MXC_CARD_SD2,
+	MXC_CARD_MAX = MXC_CARD_SD1,
+};
+#endif
+
+#define MXC_CPLD_VER_1_50       0x01
+
+/*
+ * PBC BSTAT Register bit definitions
+ */
+#define PBC_BSTAT_PRI_INT       0X0001
+#define PBC_BSTAT_USB_BYP       0X0002
+#define PBC_BSTAT_ATA_IOCS16    0X0004
+#define PBC_BSTAT_ATA_CBLID     0X0008
+#define PBC_BSTAT_ATA_DASP      0X0010
+#define PBC_BSTAT_PWR_RDY       0X0020
+#define PBC_BSTAT_SD3_WP        0X0100
+#define PBC_BSTAT_SD2_WP        0X0200
+#define PBC_BSTAT_SD1_WP        0X0400
+#define PBC_BSTAT_SD3_DET       0X0800
+#define PBC_BSTAT_SD2_DET       0X1000
+#define PBC_BSTAT_SD1_DET       0X2000
+#define PBC_BSTAT_MS_DET        0X4000
+#define PBC_BSTAT_SD3_DET_BIT   11
+#define PBC_BSTAT_SD2_DET_BIT   12
+#define PBC_BSTAT_SD1_DET_BIT   13
+#define PBC_BSTAT_MS_DET_BIT    14
+#define MXC_BSTAT_BIT(n)        ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
+				 ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
+				 ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
+				 ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
+					0x0))))
+
+/*
+ * PBC UART Control Register bit definitions
+ */
+#define PBC_UCTRL_DCE_DCD       0X0001
+#define PBC_UCTRL_DCE_DSR       0X0002
+#define PBC_UCTRL_DCE_RI        0X0004
+#define PBC_UCTRL_DTE_DTR       0X0100
+
+/*
+ * PBC UART Status Register bit definitions
+ */
+#define PBC_USTAT_DTE_DCD       0X0001
+#define PBC_USTAT_DTE_DSR       0X0002
+#define PBC_USTAT_DTE_RI        0X0004
+#define PBC_USTAT_DCE_DTR       0X0100
+
+/*
+ * PBC Interupt mask register bit definitions
+ */
+#define PBC_INTR_SD3_R_EN_BIT   4
+#define PBC_INTR_SD2_R_EN_BIT   0
+#define PBC_INTR_SD1_R_EN_BIT   6
+#define PBC_INTR_MS_R_EN_BIT    5
+#define PBC_INTR_SD3_EN_BIT     13
+#define PBC_INTR_SD2_EN_BIT     12
+#define PBC_INTR_MS_EN_BIT      14
+#define PBC_INTR_SD1_EN_BIT     15
+
+#define PBC_INTR_SD2_R_EN       0x0001
+#define PBC_INTR_LOW_BAT        0X0002
+#define PBC_INTR_OTG_FSOVER     0X0004
+#define PBC_INTR_FSH_OVER       0X0008
+#define PBC_INTR_SD3_R_EN       0x0010
+#define PBC_INTR_MS_R_EN        0x0020
+#define PBC_INTR_SD1_R_EN       0x0040
+#define PBC_INTR_FEC_INT        0X0080
+#define PBC_INTR_ENET_INT       0X0100
+#define PBC_INTR_OTGFS_INT      0X0200
+#define PBC_INTR_XUART_INT      0X0400
+#define PBC_INTR_CCTL12         0X0800
+#define PBC_INTR_SD2_EN         0x1000
+#define PBC_INTR_SD3_EN         0x2000
+#define PBC_INTR_MS_EN          0x4000
+#define PBC_INTR_SD1_EN         0x8000
+
+
+
+/* For interrupts like xuart, enet etc */
+#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX27_PIN_TIN)
+#define MXC_MAX_EXP_IO_LINES    16
+
+/*
+ * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
+ *
+ */
+#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
+#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
+#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
+#define EXPIO_INT_FEC           (MXC_EXP_IO_BASE + 7)
+#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
+#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_CCTL12_INT    (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_SD2_EN        (MXC_EXP_IO_BASE + 12)
+#define EXPIO_INT_SD3_EN        (MXC_EXP_IO_BASE + 13)
+#define EXPIO_INT_MS_EN         (MXC_EXP_IO_BASE + 14)
+#define EXPIO_INT_SD1_EN        (MXC_EXP_IO_BASE + 15)
+
+/*
+ * This is System IRQ used by CS8900A for interrupt generation
+ * taken from platform.h
+ */
+#define CS8900AIRQ              EXPIO_INT_ENET_INT
+/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
+#define CS8900A_BASE_ADDRESS    (PBC_CS8900A_IOBASE_REG + 0x300)
+
+#define MXC_PMIC_INT_LINE       IOMUX_TO_IRQ(MX27_PIN_TOUT)
+
+/*
+* This is used to detect if the CPLD version is for mx27 evb board rev-a
+*/
+#define PBC_CPLD_VERSION_IS_REVA() \
+	((__raw_readw(PBC_VERSION_REG) & \
+	(PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
+	== 0)
+
+/* This is used to active or inactive ata signal in CPLD .
+ *  It is dependent with hardware
+ */
+#define PBC_ATA_SIGNAL_ACTIVE() \
+	__raw_writew(           \
+		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
+		PBC_BCTRL2_CLEAR_REG)
+
+#define PBC_ATA_SIGNAL_INACTIVE() \
+	__raw_writew(  \
+		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
+		PBC_BCTRL2_SET_REG)
+
+#define MXC_BD_LED1             (1 << 5)
+#define MXC_BD_LED2             (1 << 6)
+#define MXC_BD_LED_ON(led) \
+	__raw_writew(led, PBC_BCTRL1_SET_REG)
+#define MXC_BD_LED_OFF(led) \
+	__raw_writew(led, PBC_BCTRL1_CLEAR_REG)
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
+#endif				/* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
new file mode 100644
index 00000000000..1bc6fb0f9a8
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
+/* Offsets for the PBC Controller register */
+
+/* PBC Board status register offset */
+#define PBC_BSTAT               0x000002
+
+/* PBC Board control register 1 set address */
+#define PBC_BCTRL1_SET          0x000004
+
+/* PBC Board control register 1 clear address */
+#define PBC_BCTRL1_CLEAR        0x000006
+
+/* PBC Board control register 2 set address */
+#define PBC_BCTRL2_SET          0x000008
+
+/* PBC Board control register 2 clear address */
+#define PBC_BCTRL2_CLEAR        0x00000A
+
+/* PBC Board control register 3 set address */
+#define PBC_BCTRL3_SET          0x00000C
+
+/* PBC Board control register 3 clear address */
+#define PBC_BCTRL3_CLEAR        0x00000E
+
+/* PBC Board control register 4 set address */
+#define PBC_BCTRL4_SET          0x000010
+
+/* PBC Board control register 4 clear address */
+#define PBC_BCTRL4_CLEAR        0x000012
+
+/* PBC Board status register 1 */
+#define PBC_BSTAT1              0x000014
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+/* Ethernet Controller IO base address */
+#define PBC_CS8900A_IOBASE      0x020000
+
+/* Ethernet Controller Memory base address */
+#define PBC_CS8900A_MEMBASE     0x021000
+
+/* Ethernet Controller DMA base address */
+#define PBC_CS8900A_DMABASE     0x022000
+
+/* External chip select 0 */
+#define PBC_XCS0                0x040000
+
+/* LCD Display enable */
+#define PBC_LCD_EN_B            0x060000
+
+/* Code test debug enable */
+#define PBC_CODE_B              0x070000
+
+/* PSRAM memory select */
+#define PBC_PSRAM_B             0x5000000
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTCURR_STATUS_REG	(PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_FSH_OVR	(MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_RES4		(MXC_EXP_IO_BASE + 4)
+#define EXPIO_INT_RES5		(MXC_EXP_IO_BASE + 5)
+#define EXPIO_INT_RES6		(MXC_EXP_IO_BASE + 6)
+#define EXPIO_INT_RES7		(MXC_EXP_IO_BASE + 7)
+#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_OTG_FS_INT	(MXC_EXP_IO_BASE + 9)
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_SYNTH_IRQ	(MXC_EXP_IO_BASE + 12)
+#define EXPIO_INT_CE_INT1	(MXC_EXP_IO_BASE + 13)
+#define EXPIO_INT_CE_INT2	(MXC_EXP_IO_BASE + 14)
+#define EXPIO_INT_RES15		(MXC_EXP_IO_BASE + 15)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
new file mode 100644
index 00000000000..e4e5cf5ad7d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+
+/*
+ * Memory Size parameters
+ */
+
+/*
+ * Size of SDRAM memory
+ */
+#define SDRAM_MEM_SIZE		SZ_128M
+/*
+ * Size of MBX buffer memory
+ */
+#define MXC_MBX_MEM_SIZE	SZ_16M
+/*
+ * Size of memory available to kernel
+ */
+#define MEM_SIZE		(SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
new file mode 100644
index 00000000000..82232ba3c8f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
+#define __ASM_ARCH_MXC_BOARD_PCM037_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
new file mode 100644
index 00000000000..750c62afd90
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
+#define __ASM_ARCH_MXC_BOARD_PCM038_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside pcm038_init().
+ *
+ * This example here is for the development board. Refer pcm970-baseboard.c
+ */
+
+extern void pcm970_baseboard_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
new file mode 100644
index 00000000000..24caa2b7c91
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_CLOCK_H__
+#define __ASM_ARCH_MXC_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/list.h>
+
+struct module;
+
+struct clk {
+	struct list_head node;
+	struct module *owner;
+	const char *name;
+	int id;
+	/* Source clock this clk depends on */
+	struct clk *parent;
+	/* Secondary clock to enable/disable with this clock */
+	struct clk *secondary;
+	/* Reference count of clock enable/disable */
+	__s8 usecount;
+	/* Register bit position for clock's enable/disable control. */
+	u8 enable_shift;
+	/* Register address for clock's enable/disable control. */
+	u32 enable_reg;
+	u32 flags;
+	/* get the current clock rate (always a fresh value) */
+	unsigned long (*get_rate) (struct clk *);
+	/* Function ptr to set the clock to a new rate. The rate must match a
+	   supported rate returned from round_rate. Leave blank if clock is not
+	   programmable */
+	int (*set_rate) (struct clk *, unsigned long);
+	/* Function ptr to round the requested clock rate to the nearest
+	   supported rate that is less than or equal to the requested rate. */
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	/* Function ptr to enable the clock. Leave blank if clock can not
+	   be gated. */
+	int (*enable) (struct clk *);
+	/* Function ptr to disable the clock. Leave blank if clock can not
+	   be gated. */
+	void (*disable) (struct clk *);
+	/* Function ptr to set the parent clock of the clock. */
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
new file mode 100644
index 00000000000..a6d2e24aab1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_COMMON_H__
+#define __ASM_ARCH_MXC_COMMON_H__
+
+extern void mxc_map_io(void);
+extern void mxc_init_irq(void);
+extern void mxc_timer_init(const char *clk_timer);
+extern int mxc_clocks_init(unsigned long fref);
+extern int mxc_register_gpios(void);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
new file mode 100644
index 00000000000..b9907bebba3
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -0,0 +1,49 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_MACH_MX31ADS
+#include <mach/board-mx31ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM037
+#include <mach/board-pcm037.h>
+#endif
+#ifdef CONFIG_MACH_MX31LITE
+#include <mach/board-mx31lite.h>
+#endif
+#ifdef CONFIG_MACH_MX27ADS
+#include <mach/board-mx27ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM038
+#include <mach/board-pcm038.h>
+#endif
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
+		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
new file mode 100644
index 00000000000..c822d569a05
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/dma.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_DMA_H__
+#define __ASM_ARCH_MXC_DMA_H__
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
new file mode 100644
index 00000000000..b542433afb1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+	@ this macro disables fast irq (not implemented)
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	@ this macro checks which interrupt occured
+	@ and returns its number in irqnr
+	@ and returns if an interrupt occured in irqstat
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+	@ Load offset & priority of the highest priority
+	@ interrupt pending from AVIC_NIVECSR
+	ldr	\irqstat, [\base, #0x40]
+	@ Shift to get the decoded IRQ number, using ASR so
+	@ 'no interrupt pending' becomes 0xffffffff
+	mov	\irqnr, \irqstat, asr #16
+	@ set zero flag if IRQ + 1 == 0
+	adds	\tmp, \irqnr, #1
+	.endm
+
+	@ irq priority table (not used)
+	.macro	irq_prio_table
+	.endm
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
new file mode 100644
index 00000000000..65eedc0d196
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_GPIO_H__
+#define __ASM_ARCH_MXC_GPIO_H__
+
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+/* use gpiolib dispatchers */
+#define gpio_get_value		__gpio_get_value
+#define gpio_set_value		__gpio_set_value
+#define gpio_cansleep		__gpio_cansleep
+
+#define gpio_to_irq(gpio)	(MXC_MAX_INT_LINES + (gpio))
+#define irq_to_gpio(irq)	((irq) - MXC_MAX_INT_LINES)
+
+struct mxc_gpio_port {
+	void __iomem *base;
+	int irq;
+	int virtual_irq_start;
+	struct gpio_chip chip;
+};
+
+int mxc_gpio_init(struct mxc_gpio_port*, int);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
new file mode 100644
index 00000000000..3caadeeda70
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#define __ASM_ARCH_MXC_HARDWARE_H__
+
+#include <asm/sizes.h>
+
+#ifdef CONFIG_ARCH_MX3
+# include <mach/mx31.h>
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+# ifdef CONFIG_MACH_MX27
+#  include <mach/mx27.h>
+# endif
+#endif
+
+#include <mach/mxc.h>
+
+#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iim.h b/arch/arm/plat-mxc/include/mach/iim.h
new file mode 100644
index 00000000000..315bffadafd
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iim.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_IIM_H__
+#define __ASM_ARCH_MXC_IIM_H__
+
+/* Register offsets */
+#define MXC_IIMSTAT             0x0000
+#define MXC_IIMSTATM            0x0004
+#define MXC_IIMERR              0x0008
+#define MXC_IIMEMASK            0x000C
+#define MXC_IIMFCTL             0x0010
+#define MXC_IIMUA               0x0014
+#define MXC_IIMLA               0x0018
+#define MXC_IIMSDAT             0x001C
+#define MXC_IIMPREV             0x0020
+#define MXC_IIMSREV             0x0024
+#define MXC_IIMPRG_P            0x0028
+#define MXC_IIMSCS0             0x002C
+#define MXC_IIMSCS1             0x0030
+#define MXC_IIMSCS2             0x0034
+#define MXC_IIMSCS3             0x0038
+#define MXC_IIMFBAC0            0x0800
+#define MXC_IIMJAC              0x0804
+#define MXC_IIMHWV1             0x0808
+#define MXC_IIMHWV2             0x080C
+#define MXC_IIMHAB0             0x0810
+#define MXC_IIMHAB1             0x0814
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMMAC              0x0814
+#define MXC_IIMPREV_FUSE        0x0818
+#define MXC_IIMSREV_FUSE        0x081C
+#define MXC_IIMSJC_CHALL_0      0x0820
+#define MXC_IIMSJC_CHALL_7      0x083C
+#define MXC_IIMFB0UC17          0x0840
+#define MXC_IIMFB0UC255         0x0BFC
+#define MXC_IIMFBAC1            0x0C00
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMSUID             0x0C04
+#define MXC_IIMKEY0             0x0C04
+#define MXC_IIMKEY20            0x0C54
+#define MXC_IIMSJC_RESP_0       0x0C58
+#define MXC_IIMSJC_RESP_7       0x0C74
+#define MXC_IIMFB1UC30          0x0C78
+#define MXC_IIMFB1UC255         0x0FFC
+
+/* Bit definitions */
+
+#define MXC_IIMHWV1_WLOCK               (0x1 << 7)
+#define MXC_IIMHWV1_MCU_ENDIAN          (0x1 << 6)
+#define MXC_IIMHWV1_DSP_ENDIAN          (0x1 << 5)
+#define MXC_IIMHWV1_BOOT_INT            (0x1 << 4)
+#define MXC_IIMHWV1_SCC_DISABLE         (0x1 << 3)
+#define MXC_IIMHWV1_HANTRO_DISABLE      (0x1 << 2)
+#define MXC_IIMHWV1_MEMSTICK_DIS        (0x1 << 1)
+
+#define MXC_IIMHWV2_WLOCK               (0x1 << 7)
+#define MXC_IIMHWV2_BP_SDMA             (0x1 << 6)
+#define MXC_IIMHWV2_SCM_DCM             (0x1 << 5)
+
+#endif /* __ASM_ARCH_MXC_IIM_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
new file mode 100644
index 00000000000..83fb72c4048
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+	int (*init)(struct platform_device *pdev);
+	int (*exit)(struct platform_device *pdev);
+	unsigned int flags;
+};
+
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
new file mode 100644
index 00000000000..65b6810124c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IO_H__
+#define __ASM_ARCH_MXC_IO_H__
+
+/* Allow IO space to be anywhere in the memory */
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* io address mapping macro */
+#define __io(a)			((void __iomem *)(a))
+
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
new file mode 100644
index 00000000000..076d37b38eb
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
@@ -0,0 +1,372 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef _MXC_GPIO_MX1_MX2_H
+#define _MXC_GPIO_MX1_MX2_H
+
+#include <linux/io.h>
+
+#define MXC_GPIO_ALLOC_MODE_NORMAL	0
+#define MXC_GPIO_ALLOC_MODE_NO_ALLOC	1
+#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC	2
+#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY	4
+#define MXC_GPIO_ALLOC_MODE_RELEASE	8
+
+/*
+ *  GPIO Module and I/O Multiplexer
+ *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
+#define MXC_DDIR(x)    (0x00 + ((x) << 8))
+#define MXC_OCR1(x)    (0x04 + ((x) << 8))
+#define MXC_OCR2(x)    (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x)      (0x1c + ((x) << 8))
+#define MXC_GIUS(x)    (0x20 + ((x) << 8))
+#define MXC_SSR(x)     (0x24 + ((x) << 8))
+#define MXC_ICR1(x)    (0x28 + ((x) << 8))
+#define MXC_ICR2(x)    (0x2c + ((x) << 8))
+#define MXC_IMR(x)     (0x30 + ((x) << 8))
+#define MXC_ISR(x)     (0x34 + ((x) << 8))
+#define MXC_GPR(x)     (0x38 + ((x) << 8))
+#define MXC_SWR(x)     (0x3c + ((x) << 8))
+#define MXC_PUEN(x)    (0x40 + ((x) << 8))
+
+#ifdef CONFIG_ARCH_MX1
+# define GPIO_PORT_MAX  3
+#endif
+#ifdef CONFIG_ARCH_MX2
+# define GPIO_PORT_MAX  5
+#endif
+
+#ifndef GPIO_PORT_MAX
+# error "GPIO config port count unknown!"
+#endif
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT   (1 << 8)
+#define GPIO_IN    (0 << 8)
+#define GPIO_PUEN  (1 << 9)
+
+#define GPIO_PF    (1 << 10)
+#define GPIO_AF    (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
+
+extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+					int alloc_mode, const char *label);
+
+/*-------------------------------------------------------------------------*/
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#ifdef CONFIG_ARCH_MX1
+#define PA0_AIN_SPI2_CLK     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC  (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1)
+#define PA1_PF_TIN           (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0          (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
+#define PA3_PF_CSI_MCLK      (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0        (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1        (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2        (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3        (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4        (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5        (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6       (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7       (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC    (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC    (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK   (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
+#define PA16_PF_I2C_SCL      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
+#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0           (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4          (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5          (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16          (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17          (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18          (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19          (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20          (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21          (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22          (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23          (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK  (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO        (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1       (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9)
+#define PB9_AF_MS_PI1        (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2      (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10)
+#define PB10_AF_MS_SCLKI     (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3      (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO      (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK       (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0     (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS        (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS     (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK    (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT    (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
+#define PB17_AF_SSI_TXDAT    (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
+#define PB18_AF_SSI_TXFS     (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK    (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE     (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE      (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PFUSBD_RCV      (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND  (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP      (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM      (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO     (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO     (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
+#define PB29_PF_UART2_RTS    (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
+#define PB30_PF_UART2_TXD    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
+#define PB31_PF_UART2_RXD    (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
+#define PC3_PF_SSI_RXFS      (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK     (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT     (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
+#define PC6_PF_SSI_TXDAT     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
+#define PC7_PF_SSI_TXFS      (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK     (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_UART1_RTS    (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
+#define PC11_PF_UART1_TXD    (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_UART1_RXD    (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
+#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK    (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS      (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO    (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI    (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI    (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
+#define PC25_BIN_UART3_DSR   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
+#define PC26_AOUT_UART3_DTR  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
+#define PC28_BIN_UART3_CTS   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
+#define PC29_AOUT_UART3_RTS  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX    (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX   (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PD6_PF_LSCLK         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
+#define PD7_PF_REV           (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR     (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
+#define PD7_AIN_SPI2_SCLK    (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS           (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD     (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
+#define PD8_AIN_SPI2_SS      (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS            (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI      (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
+#define PD9_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR      (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
+#define PD10_AF_UART2_DSR    (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
+#define PD10_AIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
+#define PD12_PF_ACD_OE       (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
+#define PD13_PF_LP_HSYNC     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
+#define PD14_PF_FLM_VSYNC    (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
+#define PD15_PF_LD0          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
+#define PD16_PF_LD1          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
+#define PD17_PF_LD2          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_LD3          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD19_PF_LD4          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
+#define PD20_PF_LD5          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
+#define PD21_PF_LD6          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
+#define PD22_PF_LD7          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
+#define PD23_PF_LD8          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
+#define PD24_PF_LD9          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
+#define PD25_PF_LD10         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
+#define PD26_PF_LD11         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
+#define PD27_PF_LD12         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
+#define PD28_PF_LD13         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
+#define PD29_PF_LD14         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
+#define PD30_PF_LD15         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
+#define PD31_PF_TMR2OUT      (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31)
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
+#define PA6_PF_LD0		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
+#define PA7_PF_LD1		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
+#define PA8_PF_LD2		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
+#define PA9_PF_LD3		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
+#define PA10_PF_LD4		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
+#define PA11_PF_LD5		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
+#define PA12_PF_LD6		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
+#define PA13_PF_LD7		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
+#define PA14_PF_LD8		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
+#define PA15_PF_LD9		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
+#define PA16_PF_LD10		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
+#define PA17_PF_LD11		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
+#define PA18_PF_LD12		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
+#define PA19_PF_LD13		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
+#define PA20_PF_LD14		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
+#define PA21_PF_LD15		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
+#define PA22_PF_LD16		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
+#define PA23_PF_LD17		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
+#define PA24_PF_REV		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
+#define PA25_PF_CLS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
+#define PA26_PF_PS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
+#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
+#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
+#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
+#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
+#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
+#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
+#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
+#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
+#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 11)
+#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
+#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
+#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
+#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 13)
+#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
+#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
+#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
+#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
+#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
+#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
+#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
+#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 19)
+#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
+#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
+#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
+#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 21)
+#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_PF | 26)
+#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
+#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
+#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 31)
+#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 5)
+#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 6)
+#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 16)
+#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 17)
+#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 18)
+#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 19)
+#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 20)
+#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 21)
+#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 22)
+#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 23)
+#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 24)
+#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 25)
+#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 26)
+#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 27)
+#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 28)
+#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 29)
+#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 30)
+#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 31)
+#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
+#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
+#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
+#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
+#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
+#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
+#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
+#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
+#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
+#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
+#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
+#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
+#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
+#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
+#define PD14_AOUT_FEC_CLR	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
+#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
+#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
+#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 25)
+#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 26)
+#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 27)
+#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 28)
+#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 29)
+#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_IN | GPIO_PF  | 30)
+#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 31)
+#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
+#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
+#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
+#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 7)
+#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
+#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 9)
+#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
+#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 11)
+#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
+#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 13)
+#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
+#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
+#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_IN  | GPIO_AF | 18)
+#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
+#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
+#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
+#endif
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5)
+
+#define IRQ_GPIOA(x)  (MXC_MAX_INT_LINES + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
new file mode 100644
index 00000000000..7509e7692f0
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -0,0 +1,501 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MX31_IOMUX_H__
+#define __MACH_MX31_IOMUX_H__
+
+#include <linux/types.h>
+
+/*
+ * various IOMUX output functions
+ */
+
+#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
+#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
+#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
+#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
+#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
+#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
+#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
+#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
+#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
+#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
+#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
+#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * various IOMUX pad functions
+ */
+enum iomux_pad_config {
+	PAD_CTL_NOLOOPBACK	= 0x0 << 9,
+	PAD_CTL_LOOPBACK	= 0x1 << 9,
+	PAD_CTL_PKE_NONE	= 0x0 << 8,
+	PAD_CTL_PKE_ENABLE	= 0x1 << 8,
+	PAD_CTL_PUE_KEEPER	= 0x0 << 7,
+	PAD_CTL_PUE_PUD		= 0x1 << 7,
+	PAD_CTL_100K_PD		= 0x0 << 5,
+	PAD_CTL_100K_PU		= 0x1 << 5,
+	PAD_CTL_47K_PU		= 0x2 << 5,
+	PAD_CTL_22K_PU		= 0x3 << 5,
+	PAD_CTL_HYS_CMOS	= 0x0 << 4,
+	PAD_CTL_HYS_SCHMITZ	= 0x1 << 4,
+	PAD_CTL_ODE_CMOS	= 0x0 << 3,
+	PAD_CTL_ODE_OpenDrain	= 0x1 << 3,
+	PAD_CTL_DRV_NORMAL	= 0x0 << 1,
+	PAD_CTL_DRV_HIGH	= 0x1 << 1,
+	PAD_CTL_DRV_MAX		= 0x2 << 1,
+	PAD_CTL_SRE_SLOW	= 0x0 << 0,
+	PAD_CTL_SRE_FAST	= 0x1 << 0
+};
+
+/*
+ * various IOMUX general purpose functions
+ */
+enum iomux_gp_func {
+	MUX_PGP_FIRI			= 1 << 0,
+	MUX_DDR_MODE			= 1 << 1,
+	MUX_PGP_CSPI_BB			= 1 << 2,
+	MUX_PGP_ATA_1			= 1 << 3,
+	MUX_PGP_ATA_2			= 1 << 4,
+	MUX_PGP_ATA_3			= 1 << 5,
+	MUX_PGP_ATA_4			= 1 << 6,
+	MUX_PGP_ATA_5			= 1 << 7,
+	MUX_PGP_ATA_6			= 1 << 8,
+	MUX_PGP_ATA_7			= 1 << 9,
+	MUX_PGP_ATA_8			= 1 << 10,
+	MUX_PGP_UH2			= 1 << 11,
+	MUX_SDCTL_CSD0_SEL		= 1 << 12,
+	MUX_SDCTL_CSD1_SEL		= 1 << 13,
+	MUX_CSPI1_UART3			= 1 << 14,
+	MUX_EXTDMAREQ2_MBX_SEL		= 1 << 15,
+	MUX_TAMPER_DETECT_EN		= 1 << 16,
+	MUX_PGP_USB_4WIRE		= 1 << 17,
+	MUX_PGB_USB_COMMON		= 1 << 18,
+	MUX_SDHC_MEMSTICK1		= 1 << 19,
+	MUX_SDHC_MEMSTICK2		= 1 << 20,
+	MUX_PGP_SPLL_BYP		= 1 << 21,
+	MUX_PGP_UPLL_BYP		= 1 << 22,
+	MUX_PGP_MSHC1_CLK_SEL		= 1 << 23,
+	MUX_PGP_MSHC2_CLK_SEL		= 1 << 24,
+	MUX_CSPI3_UART5_SEL		= 1 << 25,
+	MUX_PGP_ATA_9			= 1 << 26,
+	MUX_PGP_USB_SUSPEND		= 1 << 27,
+	MUX_PGP_USB_OTG_LOOPBACK	= 1 << 28,
+	MUX_PGP_USB_HS1_LOOPBACK	= 1 << 29,
+	MUX_PGP_USB_HS2_LOOPBACK	= 1 << 30,
+	MUX_CLKO_DDR_MODE		= 1 << 31,
+};
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void iomux_config_gpr(enum iomux_gp_func , bool);
+
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
+
+#define IOMUX_PADNUM_MASK	0x1ff
+#define IOMUX_GPIONUM_SHIFT	9
+#define IOMUX_GPIONUM_MASK	(0xff << IOMUX_GPIONUM_SHIFT)
+#define IOMUX_MODE_SHIFT	17
+#define IOMUX_MODE_MASK	(0xff << IOMUX_MODE_SHIFT)
+
+#define IOMUX_PIN(gpionum, padnum) \
+	(((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
+	 (padnum & IOMUX_PADNUM_MASK))
+
+#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
+
+#define IOMUX_TO_GPIO(iomux_pin) \
+	((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
+#define IOMUX_TO_IRQ(iomux_pin) \
+	(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
+	MXC_GPIO_INT_BASE)
+
+/*
+ * This enumeration is constructed based on the Section
+ * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
+ * value is constructed based on the rules described above.
+ */
+
+enum iomux_pins {
+	MX31_PIN_TTM_PAD	= IOMUX_PIN(0xff,   0),
+	MX31_PIN_CSPI3_SPI_RDY	= IOMUX_PIN(0xff,   1),
+	MX31_PIN_CSPI3_SCLK	= IOMUX_PIN(0xff,   2),
+	MX31_PIN_CSPI3_MISO	= IOMUX_PIN(0xff,   3),
+	MX31_PIN_CSPI3_MOSI	= IOMUX_PIN(0xff,   4),
+	MX31_PIN_CLKSS		= IOMUX_PIN(0xff,   5),
+	MX31_PIN_CE_CONTROL	= IOMUX_PIN(0xff,   6),
+	MX31_PIN_ATA_RESET_B	= IOMUX_PIN(95,     7),
+	MX31_PIN_ATA_DMACK	= IOMUX_PIN(94,     8),
+	MX31_PIN_ATA_DIOW	= IOMUX_PIN(93,     9),
+	MX31_PIN_ATA_DIOR	= IOMUX_PIN(92,    10),
+	MX31_PIN_ATA_CS1	= IOMUX_PIN(91,    11),
+	MX31_PIN_ATA_CS0	= IOMUX_PIN(90,    12),
+	MX31_PIN_SD1_DATA3	= IOMUX_PIN(63,    13),
+	MX31_PIN_SD1_DATA2	= IOMUX_PIN(62,    14),
+	MX31_PIN_SD1_DATA1	= IOMUX_PIN(61,    15),
+	MX31_PIN_SD1_DATA0	= IOMUX_PIN(60,    16),
+	MX31_PIN_SD1_CLK	= IOMUX_PIN(59,    17),
+	MX31_PIN_SD1_CMD	= IOMUX_PIN(58,    18),
+	MX31_PIN_D3_SPL		= IOMUX_PIN(0xff,  19),
+	MX31_PIN_D3_CLS		= IOMUX_PIN(0xff,  20),
+	MX31_PIN_D3_REV		= IOMUX_PIN(0xff,  21),
+	MX31_PIN_CONTRAST	= IOMUX_PIN(0xff,  22),
+	MX31_PIN_VSYNC3		= IOMUX_PIN(0xff,  23),
+	MX31_PIN_READ		= IOMUX_PIN(0xff,  24),
+	MX31_PIN_WRITE		= IOMUX_PIN(0xff,  25),
+	MX31_PIN_PAR_RS		= IOMUX_PIN(0xff,  26),
+	MX31_PIN_SER_RS		= IOMUX_PIN(89,    27),
+	MX31_PIN_LCS1		= IOMUX_PIN(88,    28),
+	MX31_PIN_LCS0		= IOMUX_PIN(87,    29),
+	MX31_PIN_SD_D_CLK	= IOMUX_PIN(86,    30),
+	MX31_PIN_SD_D_IO	= IOMUX_PIN(85,    31),
+	MX31_PIN_SD_D_I		= IOMUX_PIN(84,    32),
+	MX31_PIN_DRDY0		= IOMUX_PIN(0xff,  33),
+	MX31_PIN_FPSHIFT	= IOMUX_PIN(0xff,  34),
+	MX31_PIN_HSYNC		= IOMUX_PIN(0xff,  35),
+	MX31_PIN_VSYNC0		= IOMUX_PIN(0xff,  36),
+	MX31_PIN_LD17		= IOMUX_PIN(0xff,  37),
+	MX31_PIN_LD16		= IOMUX_PIN(0xff,  38),
+	MX31_PIN_LD15		= IOMUX_PIN(0xff,  39),
+	MX31_PIN_LD14		= IOMUX_PIN(0xff,  40),
+	MX31_PIN_LD13		= IOMUX_PIN(0xff,  41),
+	MX31_PIN_LD12		= IOMUX_PIN(0xff,  42),
+	MX31_PIN_LD11		= IOMUX_PIN(0xff,  43),
+	MX31_PIN_LD10		= IOMUX_PIN(0xff,  44),
+	MX31_PIN_LD9		= IOMUX_PIN(0xff,  45),
+	MX31_PIN_LD8		= IOMUX_PIN(0xff,  46),
+	MX31_PIN_LD7		= IOMUX_PIN(0xff,  47),
+	MX31_PIN_LD6		= IOMUX_PIN(0xff,  48),
+	MX31_PIN_LD5		= IOMUX_PIN(0xff,  49),
+	MX31_PIN_LD4		= IOMUX_PIN(0xff,  50),
+	MX31_PIN_LD3		= IOMUX_PIN(0xff,  51),
+	MX31_PIN_LD2		= IOMUX_PIN(0xff,  52),
+	MX31_PIN_LD1		= IOMUX_PIN(0xff,  53),
+	MX31_PIN_LD0		= IOMUX_PIN(0xff,  54),
+	MX31_PIN_USBH2_DATA1	= IOMUX_PIN(0xff,  55),
+	MX31_PIN_USBH2_DATA0	= IOMUX_PIN(0xff,  56),
+	MX31_PIN_USBH2_NXT	= IOMUX_PIN(0xff,  57),
+	MX31_PIN_USBH2_STP	= IOMUX_PIN(0xff,  58),
+	MX31_PIN_USBH2_DIR	= IOMUX_PIN(0xff,  59),
+	MX31_PIN_USBH2_CLK	= IOMUX_PIN(0xff,  60),
+	MX31_PIN_USBOTG_DATA7	= IOMUX_PIN(0xff,  61),
+	MX31_PIN_USBOTG_DATA6	= IOMUX_PIN(0xff,  62),
+	MX31_PIN_USBOTG_DATA5	= IOMUX_PIN(0xff,  63),
+	MX31_PIN_USBOTG_DATA4	= IOMUX_PIN(0xff,  64),
+	MX31_PIN_USBOTG_DATA3	= IOMUX_PIN(0xff,  65),
+	MX31_PIN_USBOTG_DATA2	= IOMUX_PIN(0xff,  66),
+	MX31_PIN_USBOTG_DATA1	= IOMUX_PIN(0xff,  67),
+	MX31_PIN_USBOTG_DATA0	= IOMUX_PIN(0xff,  68),
+	MX31_PIN_USBOTG_NXT	= IOMUX_PIN(0xff,  69),
+	MX31_PIN_USBOTG_STP	= IOMUX_PIN(0xff,  70),
+	MX31_PIN_USBOTG_DIR	= IOMUX_PIN(0xff,  71),
+	MX31_PIN_USBOTG_CLK	= IOMUX_PIN(0xff,  72),
+	MX31_PIN_USB_BYP	= IOMUX_PIN(31,    73),
+	MX31_PIN_USB_OC		= IOMUX_PIN(30,    74),
+	MX31_PIN_USB_PWR	= IOMUX_PIN(29,    75),
+	MX31_PIN_SJC_MOD	= IOMUX_PIN(0xff,  76),
+	MX31_PIN_DE_B		= IOMUX_PIN(0xff,  77),
+	MX31_PIN_TRSTB		= IOMUX_PIN(0xff,  78),
+	MX31_PIN_TDO		= IOMUX_PIN(0xff,  79),
+	MX31_PIN_TDI		= IOMUX_PIN(0xff,  80),
+	MX31_PIN_TMS		= IOMUX_PIN(0xff,  81),
+	MX31_PIN_TCK		= IOMUX_PIN(0xff,  82),
+	MX31_PIN_RTCK		= IOMUX_PIN(0xff,  83),
+	MX31_PIN_KEY_COL7	= IOMUX_PIN(57,    84),
+	MX31_PIN_KEY_COL6	= IOMUX_PIN(56,    85),
+	MX31_PIN_KEY_COL5	= IOMUX_PIN(55,    86),
+	MX31_PIN_KEY_COL4	= IOMUX_PIN(54,    87),
+	MX31_PIN_KEY_COL3	= IOMUX_PIN(0xff,  88),
+	MX31_PIN_KEY_COL2	= IOMUX_PIN(0xff,  89),
+	MX31_PIN_KEY_COL1	= IOMUX_PIN(0xff,  90),
+	MX31_PIN_KEY_COL0	= IOMUX_PIN(0xff,  91),
+	MX31_PIN_KEY_ROW7	= IOMUX_PIN(53,    92),
+	MX31_PIN_KEY_ROW6	= IOMUX_PIN(52,    93),
+	MX31_PIN_KEY_ROW5	= IOMUX_PIN(51,    94),
+	MX31_PIN_KEY_ROW4	= IOMUX_PIN(50,    95),
+	MX31_PIN_KEY_ROW3	= IOMUX_PIN(0xff,  96),
+	MX31_PIN_KEY_ROW2	= IOMUX_PIN(0xff,  97),
+	MX31_PIN_KEY_ROW1	= IOMUX_PIN(0xff,  98),
+	MX31_PIN_KEY_ROW0	= IOMUX_PIN(0xff,  99),
+	MX31_PIN_BATT_LINE	= IOMUX_PIN(49,   100),
+	MX31_PIN_CTS2		= IOMUX_PIN(0xff, 101),
+	MX31_PIN_RTS2		= IOMUX_PIN(0xff, 102),
+	MX31_PIN_TXD2		= IOMUX_PIN(28,   103),
+	MX31_PIN_RXD2		= IOMUX_PIN(27,   104),
+	MX31_PIN_DTR_DCE2	= IOMUX_PIN(48,   105),
+	MX31_PIN_DCD_DTE1	= IOMUX_PIN(47,   106),
+	MX31_PIN_RI_DTE1	= IOMUX_PIN(46,   107),
+	MX31_PIN_DSR_DTE1	= IOMUX_PIN(45,   108),
+	MX31_PIN_DTR_DTE1	= IOMUX_PIN(44,   109),
+	MX31_PIN_DCD_DCE1	= IOMUX_PIN(43,   110),
+	MX31_PIN_RI_DCE1	= IOMUX_PIN(42,   111),
+	MX31_PIN_DSR_DCE1	= IOMUX_PIN(41,   112),
+	MX31_PIN_DTR_DCE1	= IOMUX_PIN(40,   113),
+	MX31_PIN_CTS1		= IOMUX_PIN(39,   114),
+	MX31_PIN_RTS1		= IOMUX_PIN(38,   115),
+	MX31_PIN_TXD1		= IOMUX_PIN(37,   116),
+	MX31_PIN_RXD1		= IOMUX_PIN(36,   117),
+	MX31_PIN_CSPI2_SPI_RDY	= IOMUX_PIN(0xff, 118),
+	MX31_PIN_CSPI2_SCLK	= IOMUX_PIN(0xff, 119),
+	MX31_PIN_CSPI2_SS2	= IOMUX_PIN(0xff, 120),
+	MX31_PIN_CSPI2_SS1	= IOMUX_PIN(0xff, 121),
+	MX31_PIN_CSPI2_SS0	= IOMUX_PIN(0xff, 122),
+	MX31_PIN_CSPI2_MISO	= IOMUX_PIN(0xff, 123),
+	MX31_PIN_CSPI2_MOSI	= IOMUX_PIN(0xff, 124),
+	MX31_PIN_CSPI1_SPI_RDY	= IOMUX_PIN(0xff, 125),
+	MX31_PIN_CSPI1_SCLK	= IOMUX_PIN(0xff, 126),
+	MX31_PIN_CSPI1_SS2	= IOMUX_PIN(0xff, 127),
+	MX31_PIN_CSPI1_SS1	= IOMUX_PIN(0xff, 128),
+	MX31_PIN_CSPI1_SS0	= IOMUX_PIN(0xff, 129),
+	MX31_PIN_CSPI1_MISO	= IOMUX_PIN(0xff, 130),
+	MX31_PIN_CSPI1_MOSI	= IOMUX_PIN(0xff, 131),
+	MX31_PIN_SFS6		= IOMUX_PIN(26,   132),
+	MX31_PIN_SCK6		= IOMUX_PIN(25,   133),
+	MX31_PIN_SRXD6		= IOMUX_PIN(24,   134),
+	MX31_PIN_STXD6		= IOMUX_PIN(23,   135),
+	MX31_PIN_SFS5		= IOMUX_PIN(0xff, 136),
+	MX31_PIN_SCK5		= IOMUX_PIN(0xff, 137),
+	MX31_PIN_SRXD5		= IOMUX_PIN(22,   138),
+	MX31_PIN_STXD5		= IOMUX_PIN(21,   139),
+	MX31_PIN_SFS4		= IOMUX_PIN(0xff, 140),
+	MX31_PIN_SCK4		= IOMUX_PIN(0xff, 141),
+	MX31_PIN_SRXD4		= IOMUX_PIN(20,   142),
+	MX31_PIN_STXD4		= IOMUX_PIN(19,   143),
+	MX31_PIN_SFS3		= IOMUX_PIN(0xff, 144),
+	MX31_PIN_SCK3		= IOMUX_PIN(0xff, 145),
+	MX31_PIN_SRXD3		= IOMUX_PIN(18,   146),
+	MX31_PIN_STXD3		= IOMUX_PIN(17,   147),
+	MX31_PIN_I2C_DAT	= IOMUX_PIN(0xff, 148),
+	MX31_PIN_I2C_CLK	= IOMUX_PIN(0xff, 149),
+	MX31_PIN_CSI_PIXCLK	= IOMUX_PIN(83,   150),
+	MX31_PIN_CSI_HSYNC	= IOMUX_PIN(82,   151),
+	MX31_PIN_CSI_VSYNC	= IOMUX_PIN(81,   152),
+	MX31_PIN_CSI_MCLK	= IOMUX_PIN(80,   153),
+	MX31_PIN_CSI_D15	= IOMUX_PIN(79,   154),
+	MX31_PIN_CSI_D14	= IOMUX_PIN(78,   155),
+	MX31_PIN_CSI_D13	= IOMUX_PIN(77,   156),
+	MX31_PIN_CSI_D12	= IOMUX_PIN(76,   157),
+	MX31_PIN_CSI_D11	= IOMUX_PIN(75,   158),
+	MX31_PIN_CSI_D10	= IOMUX_PIN(74,   159),
+	MX31_PIN_CSI_D9		= IOMUX_PIN(73,   160),
+	MX31_PIN_CSI_D8		= IOMUX_PIN(72,   161),
+	MX31_PIN_CSI_D7		= IOMUX_PIN(71,   162),
+	MX31_PIN_CSI_D6		= IOMUX_PIN(70,   163),
+	MX31_PIN_CSI_D5		= IOMUX_PIN(69,   164),
+	MX31_PIN_CSI_D4		= IOMUX_PIN(68,   165),
+	MX31_PIN_M_GRANT	= IOMUX_PIN(0xff, 166),
+	MX31_PIN_M_REQUEST	= IOMUX_PIN(0xff, 167),
+	MX31_PIN_PC_POE		= IOMUX_PIN(0xff, 168),
+	MX31_PIN_PC_RW_B	= IOMUX_PIN(0xff, 169),
+	MX31_PIN_IOIS16		= IOMUX_PIN(0xff, 170),
+	MX31_PIN_PC_RST		= IOMUX_PIN(0xff, 171),
+	MX31_PIN_PC_BVD2	= IOMUX_PIN(0xff, 172),
+	MX31_PIN_PC_BVD1	= IOMUX_PIN(0xff, 173),
+	MX31_PIN_PC_VS2		= IOMUX_PIN(0xff, 174),
+	MX31_PIN_PC_VS1		= IOMUX_PIN(0xff, 175),
+	MX31_PIN_PC_PWRON	= IOMUX_PIN(0xff, 176),
+	MX31_PIN_PC_READY	= IOMUX_PIN(0xff, 177),
+	MX31_PIN_PC_WAIT_B	= IOMUX_PIN(0xff, 178),
+	MX31_PIN_PC_CD2_B	= IOMUX_PIN(0xff, 179),
+	MX31_PIN_PC_CD1_B	= IOMUX_PIN(0xff, 180),
+	MX31_PIN_D0		= IOMUX_PIN(0xff, 181),
+	MX31_PIN_D1		= IOMUX_PIN(0xff, 182),
+	MX31_PIN_D2		= IOMUX_PIN(0xff, 183),
+	MX31_PIN_D3		= IOMUX_PIN(0xff, 184),
+	MX31_PIN_D4		= IOMUX_PIN(0xff, 185),
+	MX31_PIN_D5		= IOMUX_PIN(0xff, 186),
+	MX31_PIN_D6		= IOMUX_PIN(0xff, 187),
+	MX31_PIN_D7		= IOMUX_PIN(0xff, 188),
+	MX31_PIN_D8		= IOMUX_PIN(0xff, 189),
+	MX31_PIN_D9		= IOMUX_PIN(0xff, 190),
+	MX31_PIN_D10		= IOMUX_PIN(0xff, 191),
+	MX31_PIN_D11		= IOMUX_PIN(0xff, 192),
+	MX31_PIN_D12		= IOMUX_PIN(0xff, 193),
+	MX31_PIN_D13		= IOMUX_PIN(0xff, 194),
+	MX31_PIN_D14		= IOMUX_PIN(0xff, 195),
+	MX31_PIN_D15		= IOMUX_PIN(0xff, 196),
+	MX31_PIN_NFRB		= IOMUX_PIN(16,   197),
+	MX31_PIN_NFCE_B		= IOMUX_PIN(15,   198),
+	MX31_PIN_NFWP_B		= IOMUX_PIN(14,   199),
+	MX31_PIN_NFCLE		= IOMUX_PIN(13,   200),
+	MX31_PIN_NFALE		= IOMUX_PIN(12,   201),
+	MX31_PIN_NFRE_B		= IOMUX_PIN(11,   202),
+	MX31_PIN_NFWE_B		= IOMUX_PIN(10,   203),
+	MX31_PIN_SDQS3		= IOMUX_PIN(0xff, 204),
+	MX31_PIN_SDQS2		= IOMUX_PIN(0xff, 205),
+	MX31_PIN_SDQS1		= IOMUX_PIN(0xff, 206),
+	MX31_PIN_SDQS0		= IOMUX_PIN(0xff, 207),
+	MX31_PIN_SDCLK_B	= IOMUX_PIN(0xff, 208),
+	MX31_PIN_SDCLK		= IOMUX_PIN(0xff, 209),
+	MX31_PIN_SDCKE1		= IOMUX_PIN(0xff, 210),
+	MX31_PIN_SDCKE0		= IOMUX_PIN(0xff, 211),
+	MX31_PIN_SDWE		= IOMUX_PIN(0xff, 212),
+	MX31_PIN_CAS		= IOMUX_PIN(0xff, 213),
+	MX31_PIN_RAS		= IOMUX_PIN(0xff, 214),
+	MX31_PIN_RW		= IOMUX_PIN(0xff, 215),
+	MX31_PIN_BCLK		= IOMUX_PIN(0xff, 216),
+	MX31_PIN_LBA		= IOMUX_PIN(0xff, 217),
+	MX31_PIN_ECB		= IOMUX_PIN(0xff, 218),
+	MX31_PIN_CS5		= IOMUX_PIN(0xff, 219),
+	MX31_PIN_CS4		= IOMUX_PIN(0xff, 220),
+	MX31_PIN_CS3		= IOMUX_PIN(0xff, 221),
+	MX31_PIN_CS2		= IOMUX_PIN(0xff, 222),
+	MX31_PIN_CS1		= IOMUX_PIN(0xff, 223),
+	MX31_PIN_CS0		= IOMUX_PIN(0xff, 224),
+	MX31_PIN_OE		= IOMUX_PIN(0xff, 225),
+	MX31_PIN_EB1		= IOMUX_PIN(0xff, 226),
+	MX31_PIN_EB0		= IOMUX_PIN(0xff, 227),
+	MX31_PIN_DQM3		= IOMUX_PIN(0xff, 228),
+	MX31_PIN_DQM2		= IOMUX_PIN(0xff, 229),
+	MX31_PIN_DQM1		= IOMUX_PIN(0xff, 230),
+	MX31_PIN_DQM0		= IOMUX_PIN(0xff, 231),
+	MX31_PIN_SD31		= IOMUX_PIN(0xff, 232),
+	MX31_PIN_SD30		= IOMUX_PIN(0xff, 233),
+	MX31_PIN_SD29		= IOMUX_PIN(0xff, 234),
+	MX31_PIN_SD28		= IOMUX_PIN(0xff, 235),
+	MX31_PIN_SD27		= IOMUX_PIN(0xff, 236),
+	MX31_PIN_SD26		= IOMUX_PIN(0xff, 237),
+	MX31_PIN_SD25		= IOMUX_PIN(0xff, 238),
+	MX31_PIN_SD24		= IOMUX_PIN(0xff, 239),
+	MX31_PIN_SD23		= IOMUX_PIN(0xff, 240),
+	MX31_PIN_SD22		= IOMUX_PIN(0xff, 241),
+	MX31_PIN_SD21		= IOMUX_PIN(0xff, 242),
+	MX31_PIN_SD20		= IOMUX_PIN(0xff, 243),
+	MX31_PIN_SD19		= IOMUX_PIN(0xff, 244),
+	MX31_PIN_SD18		= IOMUX_PIN(0xff, 245),
+	MX31_PIN_SD17		= IOMUX_PIN(0xff, 246),
+	MX31_PIN_SD16		= IOMUX_PIN(0xff, 247),
+	MX31_PIN_SD15		= IOMUX_PIN(0xff, 248),
+	MX31_PIN_SD14		= IOMUX_PIN(0xff, 249),
+	MX31_PIN_SD13		= IOMUX_PIN(0xff, 250),
+	MX31_PIN_SD12		= IOMUX_PIN(0xff, 251),
+	MX31_PIN_SD11		= IOMUX_PIN(0xff, 252),
+	MX31_PIN_SD10		= IOMUX_PIN(0xff, 253),
+	MX31_PIN_SD9		= IOMUX_PIN(0xff, 254),
+	MX31_PIN_SD8		= IOMUX_PIN(0xff, 255),
+	MX31_PIN_SD7		= IOMUX_PIN(0xff, 256),
+	MX31_PIN_SD6		= IOMUX_PIN(0xff, 257),
+	MX31_PIN_SD5		= IOMUX_PIN(0xff, 258),
+	MX31_PIN_SD4		= IOMUX_PIN(0xff, 259),
+	MX31_PIN_SD3		= IOMUX_PIN(0xff, 260),
+	MX31_PIN_SD2		= IOMUX_PIN(0xff, 261),
+	MX31_PIN_SD1		= IOMUX_PIN(0xff, 262),
+	MX31_PIN_SD0		= IOMUX_PIN(0xff, 263),
+	MX31_PIN_SDBA0		= IOMUX_PIN(0xff, 264),
+	MX31_PIN_SDBA1		= IOMUX_PIN(0xff, 265),
+	MX31_PIN_A25		= IOMUX_PIN(0xff, 266),
+	MX31_PIN_A24		= IOMUX_PIN(0xff, 267),
+	MX31_PIN_A23		= IOMUX_PIN(0xff, 268),
+	MX31_PIN_A22		= IOMUX_PIN(0xff, 269),
+	MX31_PIN_A21		= IOMUX_PIN(0xff, 270),
+	MX31_PIN_A20		= IOMUX_PIN(0xff, 271),
+	MX31_PIN_A19		= IOMUX_PIN(0xff, 272),
+	MX31_PIN_A18		= IOMUX_PIN(0xff, 273),
+	MX31_PIN_A17		= IOMUX_PIN(0xff, 274),
+	MX31_PIN_A16		= IOMUX_PIN(0xff, 275),
+	MX31_PIN_A14		= IOMUX_PIN(0xff, 276),
+	MX31_PIN_A15		= IOMUX_PIN(0xff, 277),
+	MX31_PIN_A13		= IOMUX_PIN(0xff, 278),
+	MX31_PIN_A12		= IOMUX_PIN(0xff, 279),
+	MX31_PIN_A11		= IOMUX_PIN(0xff, 280),
+	MX31_PIN_MA10		= IOMUX_PIN(0xff, 281),
+	MX31_PIN_A10		= IOMUX_PIN(0xff, 282),
+	MX31_PIN_A9		= IOMUX_PIN(0xff, 283),
+	MX31_PIN_A8		= IOMUX_PIN(0xff, 284),
+	MX31_PIN_A7		= IOMUX_PIN(0xff, 285),
+	MX31_PIN_A6		= IOMUX_PIN(0xff, 286),
+	MX31_PIN_A5		= IOMUX_PIN(0xff, 287),
+	MX31_PIN_A4		= IOMUX_PIN(0xff, 288),
+	MX31_PIN_A3		= IOMUX_PIN(0xff, 289),
+	MX31_PIN_A2		= IOMUX_PIN(0xff, 290),
+	MX31_PIN_A1		= IOMUX_PIN(0xff, 291),
+	MX31_PIN_A0		= IOMUX_PIN(0xff, 292),
+	MX31_PIN_VPG1		= IOMUX_PIN(0xff, 293),
+	MX31_PIN_VPG0		= IOMUX_PIN(0xff, 294),
+	MX31_PIN_DVFS1		= IOMUX_PIN(0xff, 295),
+	MX31_PIN_DVFS0		= IOMUX_PIN(0xff, 296),
+	MX31_PIN_VSTBY		= IOMUX_PIN(0xff, 297),
+	MX31_PIN_POWER_FAIL	= IOMUX_PIN(0xff, 298),
+	MX31_PIN_CKIL		= IOMUX_PIN(0xff, 299),
+	MX31_PIN_BOOT_MODE4	= IOMUX_PIN(0xff, 300),
+	MX31_PIN_BOOT_MODE3	= IOMUX_PIN(0xff, 301),
+	MX31_PIN_BOOT_MODE2	= IOMUX_PIN(0xff, 302),
+	MX31_PIN_BOOT_MODE1	= IOMUX_PIN(0xff, 303),
+	MX31_PIN_BOOT_MODE0	= IOMUX_PIN(0xff, 304),
+	MX31_PIN_CLKO		= IOMUX_PIN(0xff, 305),
+	MX31_PIN_POR_B		= IOMUX_PIN(0xff, 306),
+	MX31_PIN_RESET_IN_B	= IOMUX_PIN(0xff, 307),
+	MX31_PIN_CKIH		= IOMUX_PIN(0xff, 308),
+	MX31_PIN_SIMPD0		= IOMUX_PIN(35,   309),
+	MX31_PIN_SRX0		= IOMUX_PIN(34,   310),
+	MX31_PIN_STX0		= IOMUX_PIN(33,   311),
+	MX31_PIN_SVEN0		= IOMUX_PIN(32,   312),
+	MX31_PIN_SRST0		= IOMUX_PIN(67,   313),
+	MX31_PIN_SCLK0		= IOMUX_PIN(66,   314),
+	MX31_PIN_GPIO3_1	= IOMUX_PIN(65,   315),
+	MX31_PIN_GPIO3_0	= IOMUX_PIN(64,   316),
+	MX31_PIN_GPIO1_6	= IOMUX_PIN( 6,   317),
+	MX31_PIN_GPIO1_5	= IOMUX_PIN( 5,   318),
+	MX31_PIN_GPIO1_4	= IOMUX_PIN( 4,   319),
+	MX31_PIN_GPIO1_3	= IOMUX_PIN( 3,   320),
+	MX31_PIN_GPIO1_2	= IOMUX_PIN( 2,   321),
+	MX31_PIN_GPIO1_1	= IOMUX_PIN( 1,   322),
+	MX31_PIN_GPIO1_0	= IOMUX_PIN( 0,   323),
+	MX31_PIN_PWMO		= IOMUX_PIN( 9,   324),
+	MX31_PIN_WATCHDOG_RST	= IOMUX_PIN(0xff, 325),
+	MX31_PIN_COMPARE	= IOMUX_PIN( 8,   326),
+	MX31_PIN_CAPTURE	= IOMUX_PIN( 7,   327),
+};
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MX31_PIN_(pin name)__(function)
+ */
+#define MX31_PIN_CSPI3_MOSI__RXD3	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_MISO__TXD3	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins, u32);
+
+#endif
+
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
new file mode 100644
index 00000000000..228c4f68ccd
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -0,0 +1,16 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IRQS_H__
+#define __ASM_ARCH_MXC_IRQS_H__
+
+#include <mach/hardware.h>
+
+#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
new file mode 100644
index 00000000000..d7a8d3ebed5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MEMORY_H__
+#define __ASM_ARCH_MXC_MEMORY_H__
+
+#include <mach/hardware.h>
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * This macro is used to translate the virtual address to an address
+ * suitable to be passed to set_dma_addr()
+ */
+#define __virt_to_bus(a)	__virt_to_phys(a)
+
+/*
+ * Used to convert an address for DMA operations to an address that the
+ * kernel can use.
+ */
+#define __bus_to_virt(a)	__phys_to_virt(a)
+
+#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
new file mode 100644
index 00000000000..212ecc24662
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -0,0 +1,302 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX27_H__
+#define __ASM_ARCH_MXC_MX27_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* IRAM */
+#define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
+
+/* Register offests */
+#define AIPI_BASE_ADDR          0x10000000
+#define AIPI_BASE_ADDR_VIRT     0xF4000000
+#define AIPI_SIZE               SZ_1M
+
+#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
+#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
+#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
+#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
+#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
+#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
+#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
+#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
+#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
+#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
+#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
+#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
+#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
+#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
+#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
+#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
+#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
+#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
+#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
+#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
+#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
+#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
+
+#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
+#define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
+#define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
+#define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
+#define UART5_BASE_ADDR         (AIPI_BASE_ADDR + 0x1B000)
+#define UART6_BASE_ADDR         (AIPI_BASE_ADDR + 0x1C000)
+#define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
+#define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
+#define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
+
+#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
+#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
+#define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
+#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
+/* for mx27*/
+#define OTG_BASE_ADDR           USBOTG_BASE_ADDR
+#define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
+#define EMMA_BASE_ADDR          (AIPI_BASE_ADDR + 0x26400)
+#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
+#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
+#define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
+
+#define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
+#define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
+#define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
+#define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
+#define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
+
+#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
+#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
+
+/* ROMP and AVIC */
+#define ROMP_BASE_ADDR          0x10041000
+
+#define AVIC_BASE_ADDR          0x10040000
+
+#define SAHB1_BASE_ADDR         0x80000000
+#define SAHB1_BASE_ADDR_VIRT    0xF4100000
+#define SAHB1_SIZE              SZ_1M
+
+#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
+#define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
+
+/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
+#define X_MEMC_BASE_ADDR        0xD8000000
+#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
+#define X_MEMC_SIZE             SZ_1M
+
+#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
+#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
+#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
+
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR		0xA0000000
+#define CSD1_BASE_ADDR		0xB0000000
+
+#define CS0_BASE_ADDR           0xC0000000
+#define CS1_BASE_ADDR           0xC8000000
+#define CS2_BASE_ADDR           0xD0000000
+#define CS3_BASE_ADDR           0xD2000000
+#define CS4_BASE_ADDR           0xD4000000
+#define CS5_BASE_ADDR           0xD6000000
+#define PCMCIA_MEM_BASE_ADDR    0xDC000000
+
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
+		AIPI_IO_ADDRESS(x) : \
+	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+		SAHB1_IO_ADDRESS(x) : \
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
+
+/* define the address mapping macros: in physical address order */
+#define AIPI_IO_ADDRESS(x)  \
+	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)	AIPI_IO_ADDRESS(x)
+
+#define SAHB1_IO_ADDRESS(x)  \
+	(((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* fixed interrput numbers */
+#define MXC_INT_CCM		63
+#define MXC_INT_IIM		62
+#define MXC_INT_LCDC		61
+#define MXC_INT_SLCDC		60
+#define MXC_INT_SAHARA		59
+#define MXC_INT_SCC_SCM		58
+#define MXC_INT_SCC_SMN		57
+#define MXC_INT_USB3		56
+#define MXC_INT_USB2		55
+#define MXC_INT_USB1		54
+#define MXC_INT_VPU		53
+#define MXC_INT_EMMAPP		52
+#define MXC_INT_EMMAPRP		51
+#define MXC_INT_FEC		50
+#define MXC_INT_UART5		49
+#define MXC_INT_UART6		48
+#define MXC_INT_DMACH15		47
+#define MXC_INT_DMACH14		46
+#define MXC_INT_DMACH13		45
+#define MXC_INT_DMACH12		44
+#define MXC_INT_DMACH11		43
+#define MXC_INT_DMACH10		42
+#define MXC_INT_DMACH9		41
+#define MXC_INT_DMACH8		40
+#define MXC_INT_DMACH7		39
+#define MXC_INT_DMACH6		38
+#define MXC_INT_DMACH5		37
+#define MXC_INT_DMACH4		36
+#define MXC_INT_DMACH3		35
+#define MXC_INT_DMACH2		34
+#define MXC_INT_DMACH1		33
+#define MXC_INT_DMACH0		32
+#define MXC_INT_CSI		31
+#define MXC_INT_ATA		30
+#define MXC_INT_NANDFC		29
+#define MXC_INT_PCMCIA		28
+#define MXC_INT_WDOG		27
+#define MXC_INT_GPT1		26
+#define MXC_INT_GPT2		25
+#define MXC_INT_GPT3		24
+#define MXC_INT_GPT		INT_GPT1
+#define MXC_INT_PWM		23
+#define MXC_INT_RTC		22
+#define MXC_INT_KPP		21
+#define MXC_INT_UART1		20
+#define MXC_INT_UART2		19
+#define MXC_INT_UART3		18
+#define MXC_INT_UART4		17
+#define MXC_INT_CSPI1		16
+#define MXC_INT_CSPI2		15
+#define MXC_INT_SSI1		14
+#define MXC_INT_SSI2		13
+#define MXC_INT_I2C		12
+#define MXC_INT_SDHC1		11
+#define MXC_INT_SDHC2		10
+#define MXC_INT_SDHC3		9
+#define MXC_INT_GPIO		8
+#define MXC_INT_SDHC		7
+#define MXC_INT_CSPI3		6
+#define MXC_INT_RTIC		5
+#define MXC_INT_GPT4		4
+#define MXC_INT_GPT5		3
+#define MXC_INT_GPT6		2
+#define MXC_INT_I2C2		1
+
+/* fixed DMA request numbers */
+#define DMA_REQ_NFC             37
+#define DMA_REQ_SDHC3           36
+#define DMA_REQ_UART6_RX        35
+#define DMA_REQ_UART6_TX        34
+#define DMA_REQ_UART5_RX        33
+#define DMA_REQ_UART5_TX        32
+#define DMA_REQ_CSI_RX          31
+#define DMA_REQ_CSI_STAT        30
+#define DMA_REQ_ATA_RCV         29
+#define DMA_REQ_ATA_TX          28
+#define DMA_REQ_UART1_TX        27
+#define DMA_REQ_UART1_RX        26
+#define DMA_REQ_UART2_TX        25
+#define DMA_REQ_UART2_RX        24
+#define DMA_REQ_UART3_TX        23
+#define DMA_REQ_UART3_RX        22
+#define DMA_REQ_UART4_TX        21
+#define DMA_REQ_UART4_RX        20
+#define DMA_REQ_CSPI1_TX        19
+#define DMA_REQ_CSPI1_RX        18
+#define DMA_REQ_CSPI2_TX        17
+#define DMA_REQ_CSPI2_RX        16
+#define DMA_REQ_SSI1_TX1        15
+#define DMA_REQ_SSI1_RX1        14
+#define DMA_REQ_SSI1_TX0        13
+#define DMA_REQ_SSI1_RX0        12
+#define DMA_REQ_SSI2_TX1        11
+#define DMA_REQ_SSI2_RX1        10
+#define DMA_REQ_SSI2_TX0        9
+#define DMA_REQ_SSI2_RX0        8
+#define DMA_REQ_SDHC1           7
+#define DMA_REQ_SDHC2           6
+#define DMA_REQ_MSHC            4
+#define DMA_REQ_EXT             3
+#define DMA_REQ_CSPI3_TX        2
+#define DMA_REQ_CSPI3_RX        1
+
+/* silicon revisions specific to i.MX27 */
+#define CHIP_REV_1_0		0x00
+#define CHIP_REV_2_0		0x01
+
+#ifndef __ASSEMBLY__
+extern int mx27_revision(void);
+#endif
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x1C
+#define GPIO_GDIR	 	0x00
+#define GPIO_PSR	 	0x24
+#define GPIO_ICR1	 	0x28
+#define GPIO_ICR2	 	0x2C
+#define GPIO_IMR	 	0x30
+#define GPIO_ISR	 	0x34
+#define GPIO_INT_LOW_LEV	0x3
+#define GPIO_INT_HIGH_LEV	0x2
+#define GPIO_INT_RISE_EDGE 	0x0
+#define GPIO_INT_FALL_EDGE	0x1
+#define GPIO_INT_NONE		0x4
+
+/* Mandatory defines used globally */
+
+/* this is an i.MX27 CPU */
+#define cpu_is_mx27()		(1)
+
+/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
+#define ARCH_NR_GPIOS		(192 + 16)
+
+/* OS clock tick rate */
+#define CLOCK_TICK_RATE         13300000
+
+/* Start of RAM */
+#define PHYS_OFFSET		SDRAM_BASE_ADDR
+
+/* max interrupt lines count */
+#define NR_IRQS			256
+
+/* count of internal interrupt sources */
+#define MXC_MAX_INT_LINES	64
+
+#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
new file mode 100644
index 00000000000..a7373e4a56c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -0,0 +1,384 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*!
+ * defines the hardware clock tick rate
+ */
+#define CLOCK_TICK_RATE		16625000
+
+/*
+ * MX31 memory map:
+ *
+ * Virt		Phys		Size	What
+ * ---------------------------------------------------------------------------
+ * F8000000	1FFC0000	16K	IRAM
+ * F9000000	30000000	256M	L2CC
+ * FC000000	43F00000	1M	AIPS 1
+ * FC100000	50000000	1M	SPBA
+ * FC200000	53F00000	1M	AIPS 2
+ * FC500000	60000000	128M	ROMPATCH
+ * FC400000	68000000	128M	AVIC
+ *         	70000000	256M	IPU (MAX M2)
+ *         	80000000	256M	CSD0 SDRAM/DDR
+ *         	90000000	256M	CSD1 SDRAM/DDR
+ *         	A0000000	128M	CS0 Flash
+ *         	A8000000	128M	CS1 Flash
+ *         	B0000000	32M	CS2
+ *         	B2000000	32M	CS3
+ * F4000000	B4000000	32M	CS4
+ *         	B6000000	32M	CS5
+ * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
+ *         	C0000000	64M	PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR		0xA0000000
+#define CS1_BASE_ADDR		0xA8000000
+#define CS2_BASE_ADDR		0xB0000000
+#define CS3_BASE_ADDR		0xB2000000
+
+#define CS4_BASE_ADDR		0xB4000000
+#define CS4_BASE_ADDR_VIRT	0xF4000000
+#define CS4_SIZE		SZ_32M
+
+#define CS5_BASE_ADDR		0xB6000000
+#define PCMCIA_MEM_BASE_ADDR	0xBC000000
+
+/*
+ * IRAM
+ */
+#define IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define IRAM_BASE_ADDR_VIRT	0xF8000000
+#define IRAM_SIZE		SZ_16K
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR		0x30000000
+#define L2CC_BASE_ADDR_VIRT	0xF9000000
+#define L2CC_SIZE		SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR		0x43F00000
+#define AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define AIPS1_SIZE		SZ_1M
+
+#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
+#define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
+#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
+#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
+#define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
+#define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
+#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 	0x50000000
+#define SPBA0_BASE_ADDR_VIRT	0xFC100000
+#define SPBA0_SIZE		SZ_1M
+
+#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
+#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
+#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
+#define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
+#define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
+#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
+#define MSHC2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR		0x53F00000
+#define AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define AIPS2_SIZE		SZ_1M
+#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
+#define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
+#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
+#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
+#define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
+#define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
+#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
+#define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
+#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR		0x60000000
+#define ROMP_BASE_ADDR_VIRT	0xFC500000
+#define ROMP_SIZE		SZ_1M
+
+#define AVIC_BASE_ADDR		0x68000000
+#define AVIC_BASE_ADDR_VIRT	0xFC400000
+#define AVIC_SIZE		SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR	0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
+#define X_MEMC_SIZE		SZ_64K
+
+#define NFC_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x0000)
+#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR	0x70000000
+#define CSD0_BASE_ADDR		0x80000000
+#define CSD1_BASE_ADDR		0x90000000
+#define CS0_BASE_ADDR		0xA0000000
+#define CS1_BASE_ADDR		0xA8000000
+#define CS2_BASE_ADDR		0xB0000000
+#define CS3_BASE_ADDR		0xB2000000
+
+#define CS4_BASE_ADDR		0xB4000000
+#define CS4_BASE_ADDR_VIRT	0xF4000000
+#define CS4_SIZE		SZ_32M
+
+#define CS5_BASE_ADDR		0xB6000000
+#define PCMCIA_MEM_BASE_ADDR	0xBC000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
+	((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
+	((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+	0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+
+#define IRAM_IO_ADDRESS(x)  \
+	(((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
+
+#define L2CC_IO_ADDRESS(x)  \
+	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x)  \
+	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x)  \
+	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x)  \
+	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x)  \
+	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)  \
+	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */
+#define PHYS_OFFSET             CSD0_BASE_ADDR
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_PEN_ADS7843	0
+#define MXC_INT_RESV1		1
+#define MXC_INT_CS8900A		2
+#define MXC_INT_I2C3		3
+#define MXC_INT_I2C2		4
+#define MXC_INT_MPEG4_ENCODER	5
+#define MXC_INT_RTIC		6
+#define MXC_INT_FIRI		7
+#define MXC_INT_MMC_SDHC2	8
+#define MXC_INT_MMC_SDHC1	9
+#define MXC_INT_I2C		10
+#define MXC_INT_SSI2		11
+#define MXC_INT_SSI1		12
+#define MXC_INT_CSPI2		13
+#define MXC_INT_CSPI1		14
+#define MXC_INT_ATA		15
+#define MXC_INT_MBX		16
+#define MXC_INT_CSPI3		17
+#define MXC_INT_UART3		18
+#define MXC_INT_IIM		19
+#define MXC_INT_SIM2		20
+#define MXC_INT_SIM1		21
+#define MXC_INT_RNGA		22
+#define MXC_INT_EVTMON		23
+#define MXC_INT_KPP		24
+#define MXC_INT_RTC		25
+#define MXC_INT_PWM		26
+#define MXC_INT_EPIT2		27
+#define MXC_INT_EPIT1		28
+#define MXC_INT_GPT		29
+#define MXC_INT_RESV30		30
+#define MXC_INT_RESV31		31
+#define MXC_INT_UART2		32
+#define MXC_INT_NANDFC		33
+#define MXC_INT_SDMA		34
+#define MXC_INT_USB1		35
+#define MXC_INT_USB2		36
+#define MXC_INT_USB3		37
+#define MXC_INT_USB4		38
+#define MXC_INT_MSHC1		39
+#define MXC_INT_MSHC2		40
+#define MXC_INT_IPU_ERR		41
+#define MXC_INT_IPU_SYN		42
+#define MXC_INT_RESV43		43
+#define MXC_INT_RESV44		44
+#define MXC_INT_UART1		45
+#define MXC_INT_UART4		46
+#define MXC_INT_UART5		47
+#define MXC_INT_ECT		48
+#define MXC_INT_SCC_SCM		49
+#define MXC_INT_SCC_SMN		50
+#define MXC_INT_GPIO2		51
+#define MXC_INT_GPIO1		52
+#define MXC_INT_CCM		53
+#define MXC_INT_PCMCIA		54
+#define MXC_INT_WDOG		55
+#define MXC_INT_GPIO3		56
+#define MXC_INT_RESV57		57
+#define MXC_INT_EXT_POWER	58
+#define MXC_INT_EXT_TEMPER	59
+#define MXC_INT_EXT_SENSOR60	60
+#define MXC_INT_EXT_SENSOR61	61
+#define MXC_INT_EXT_WDOG	62
+#define MXC_INT_EXT_TV		63
+
+#define MXC_MAX_INT_LINES	64
+
+#define MXC_GPIO_INT_BASE	MXC_MAX_INT_LINES
+#define MXC_MAX_GPIO_LINES      (GPIO_NUM_PIN * GPIO_PORT_NUM)
+#define MXC_MAX_VIRTUAL_INTS	16
+
+#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS)
+
+/*!
+ * Number of GPIO port as defined in the IC Spec
+ */
+#define GPIO_PORT_NUM		3
+/*!
+ * Number of GPIO pins per port
+ */
+#define GPIO_NUM_PIN		32
+
+#define PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0		0x10
+#define CHIP_REV_1_1		0x11
+#define CHIP_REV_1_2		0x12
+#define CHIP_REV_1_3		0x13
+#define CHIP_REV_2_0		0x20
+#define CHIP_REV_2_1		0x21
+#define CHIP_REV_2_2		0x22
+#define CHIP_REV_2_3		0x23
+#define CHIP_REV_3_0		0x30
+#define CHIP_REV_3_1		0x31
+#define CHIP_REV_3_2		0x32
+
+#define SYSTEM_REV_MIN		CHIP_REV_1_0
+#define SYSTEM_REV_NUM		3
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x00
+#define GPIO_GDIR	 	0x04
+#define GPIO_PSR	 	0x08
+#define GPIO_ICR1	 	0x0C
+#define GPIO_ICR2	 	0x10
+#define GPIO_IMR	 	0x14
+#define GPIO_ISR	 	0x18
+#define GPIO_INT_LOW_LEV	0x0
+#define GPIO_INT_HIGH_LEV	0x1
+#define GPIO_INT_RISE_EDGE	0x2
+#define GPIO_INT_FALL_EDGE	0x3
+#define GPIO_INT_NONE		0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS		96
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+/* this is a i.MX31 CPU */
+#define cpu_is_mx31()		(1)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+	return system_rev;
+}
+#endif
+
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
new file mode 100644
index 00000000000..332eda4dbd3
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_H__
+#define __ASM_ARCH_MXC_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* clean up all things that are not used */
+#ifndef CONFIG_ARCH_MX3
+# define cpu_is_mx31() (0)
+#endif
+
+#ifndef CONFIG_MACH_MX27
+# define cpu_is_mx27() (0)
+#endif
+
+#endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
new file mode 100644
index 00000000000..130aebfbe16
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -0,0 +1,158 @@
+/*
+ * mxc_timer.h
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_TIMER_H
+#define __PLAT_MXC_TIMER_H
+
+#include <linux/clk.h>
+#include <mach/hardware.h>
+
+#ifdef CONFIG_ARCH_IMX
+#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
+#define TIMER_INTERRUPT		TIM1_INT
+
+#define TCTL_VAL		TCTL_CLK_PCLK1
+#define TCTL_IRQEN		(1<<4)
+#define TCTL_FRR		(1<<8)
+#define TCTL_CLK_PCLK1		(1<<1)
+#define TCTL_CLK_PCLK1_4	(2<<1)
+#define TCTL_CLK_TIN		(3<<1)
+#define TCTL_CLK_32		(4<<1)
+
+#define MXC_TCTL   0x00
+#define MXC_TPRER  0x04
+#define MXC_TCMP   0x08
+#define MXC_TCR    0x0c
+#define MXC_TCN    0x10
+#define MXC_TSTAT  0x14
+#define TSTAT_CAPT		(1<<1)
+#define TSTAT_COMP		(1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+				TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_IMX */
+
+#ifdef CONFIG_ARCH_MX2
+#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT		MXC_INT_GPT1
+
+#define MXC_TCTL   0x00
+#define TCTL_VAL		TCTL_CLK_PCLK1
+#define TCTL_CLK_PCLK1		(1<<1)
+#define TCTL_CLK_PCLK1_4	(2<<1)
+#define TCTL_IRQEN		(1<<4)
+#define TCTL_FRR		(1<<8)
+#define MXC_TPRER  0x04
+#define MXC_TCMP   0x08
+#define MXC_TCR    0x0c
+#define MXC_TCN    0x10
+#define MXC_TSTAT  0x14
+#define TSTAT_CAPT		(1<<1)
+#define TSTAT_COMP		(1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+				TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX2 */
+
+#ifdef CONFIG_ARCH_MX3
+#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT		MXC_INT_GPT
+
+#define MXC_TCTL   0x00
+#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
+#define TCTL_CLK_IPG		(1<<6)
+#define TCTL_FRR		(1<<9)
+#define TCTL_WAITEN		(1<<3)
+
+#define MXC_TPRER  0x04
+#define MXC_TSTAT  0x08
+#define TSTAT_OF1		(1<<0)
+#define TSTAT_OF2		(1<<1)
+#define TSTAT_OF3		(1<<2)
+#define TSTAT_IF1		(1<<3)
+#define TSTAT_IF2		(1<<4)
+#define TSTAT_ROV		(1<<5)
+#define MXC_IR     0x0c
+#define MXC_TCMP   0x10
+#define MXC_TCMP2  0x14
+#define MXC_TCMP3  0x18
+#define MXC_TCR    0x1c
+#define MXC_TCN    0x24
+
+static inline void gpt_irq_disable(void)
+{
+	__raw_writel(0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_acknowledge(void)
+{
+	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX3 */
+
+#define TCTL_SWR		(1<<15)
+#define TCTL_CC			(1<<10)
+#define TCTL_OM			(1<<9)
+#define TCTL_CAP_RIS		(1<<6)
+#define TCTL_CAP_FAL		(2<<6)
+#define TCTL_CAP_RIS_FAL	(3<<6)
+#define TCTL_CAP_ENA		(1<<5)
+#define TCTL_TEN		(1<<0)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
new file mode 100644
index 00000000000..bbfc37465fc
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -0,0 +1,34 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_SYSTEM_H__
+#define __ASM_ARCH_MXC_SYSTEM_H__
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
new file mode 100644
index 00000000000..0b0af0253e9
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_TIMEX_H__
+#define __ASM_ARCH_MXC_TIMEX_H__
+
+#include <mach/hardware.h>	/* for CLOCK_TICK_RATE */
+
+#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
new file mode 100644
index 00000000000..de6fe036598
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/plat-mxc/include/mach/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
+#define __ASM_ARCH_MXC_UNCOMPRESS_H__
+
+#define __MXC_BOOT_UNCOMPRESS
+
+#include <mach/hardware.h>
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+static void putc(int ch)
+{
+	static unsigned long serial_port = 0;
+
+	if (unlikely(serial_port == 0)) {
+		do {
+			serial_port = UART1_BASE_ADDR;
+			if (UART(UCR1) & UCR1_UARTEN)
+				break;
+			serial_port = UART2_BASE_ADDR;
+			if (UART(UCR1) & UCR1_UARTEN)
+				break;
+			return;
+		} while (0);
+	}
+
+	while (!(UART(USR2) & USR2_TXFE))
+		barrier();
+
+	UART(TXR) = ch;
+}
+
+#define flush() do { } while (0)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
new file mode 100644
index 00000000000..62d97623412
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ *  Copyright (C) 2000 Russell King.
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_VMALLOC_H__
+#define __ASM_ARCH_MXC_VMALLOC_H__
+
+/* vmalloc ending address */
+#define VMALLOC_END       0xF4000000
+
+#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index 1985571eb40..d97387aa9a4 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -30,9 +30,9 @@
 #include <linux/string.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/iomux-mx1-mx2.h>
 
 void mxc_gpio_mode(int gpio_mode)
 {
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 1fbe01da692..1053b666c67 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -19,7 +19,7 @@
 
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 3bf86343fdf..fd28f5194f7 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -26,10 +26,10 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/time.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mxc_timer.h>
+#include <mach/common.h>
+#include <mach/mxc_timer.h>
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c2e741de020..197974defbe 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -10,7 +10,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -26,7 +25,7 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 8d04929a3c7..f4dff423ae7 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -19,20 +19,20 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index d719c15daa5..ae1de308aaa 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index f455233af08..5b73bb27445 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,11 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9128a80d228..9422dee7de8 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -13,13 +13,13 @@
 #include <linux/leds.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 81002b722da..01da719a745 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,17 +14,18 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+#include <mach/mcbsp.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define	OMAP_MMC1_BASE		0x4809c000
-#define OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x1fc)
+#define	OMAP_MMC1_INT		INT_24XX_MMC_IRQ
+
+#define	OMAP_MMC2_BASE		0x480b4000
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x1fc)
+#define	OMAP_MMC2_INT		INT_24XX_MMC2_IRQ
+
 #else
+
 #define	OMAP_MMC1_BASE		0xfffb7800
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x7f)
 #define OMAP_MMC1_INT		INT_MMC
-#endif
+
 #define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x7f)
+#define	OMAP_MMC2_INT		INT_1610_MMC2
+
+#endif
 
-static struct omap_mmc_conf mmc1_conf;
+static struct omap_mmc_platform_data mmc1_data;
 
 static u64 mmc1_dmamask = 0xffffffff;
 
 static struct resource mmc1_resources[] = {
 	{
 		.start		= OMAP_MMC1_BASE,
-		.end		= OMAP_MMC1_BASE + 0x7f,
+		.end		= OMAP_MMC1_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = {
 	.id		= 1,
 	.dev = {
 		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
+		.platform_data	= &mmc1_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 	.resource	= mmc1_resources,
 };
 
-#ifdef	CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
 
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
 
 static u64 mmc2_dmamask = 0xffffffff;
 
 static struct resource mmc2_resources[] = {
 	{
 		.start		= OMAP_MMC2_BASE,
-		.end		= OMAP_MMC2_BASE + 0x7f,
+		.end		= OMAP_MMC2_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_1610_MMC2,
+		.start		= OMAP_MMC2_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = {
 	.id		= 2,
 	.dev = {
 		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
+		.platform_data	= &mmc2_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc2_resources),
 	.resource	= mmc2_resources,
 };
 #endif
 
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
 {
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
 		return;
 
-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
+	if (mmc_conf->mmc[0].enabled) {
 		if (cpu_is_omap24xx()) {
 			omap_cfg_reg(H18_24XX_MMC_CMD);
 			omap_cfg_reg(H15_24XX_MMC_CLKI);
@@ -292,7 +300,7 @@ static void __init omap_init_mmc(void)
 				omap_cfg_reg(P20_1710_MMC_DATDIR0);
 			}
 		}
-		if (mmc->wire4) {
+		if (mmc_conf->mmc[0].wire4) {
 			if (cpu_is_omap24xx()) {
 				omap_cfg_reg(H14_24XX_MMC_DAT1);
 				omap_cfg_reg(E19_24XX_MMC_DAT2);
@@ -303,25 +311,22 @@ static void __init omap_init_mmc(void)
 			} else {
 				omap_cfg_reg(MMC_DAT1);
 				/* NOTE:  DAT2 can be on W10 (here) or M15 */
-				if (!mmc->nomux)
+				if (!mmc_conf->mmc[0].nomux)
 					omap_cfg_reg(MMC_DAT2);
 				omap_cfg_reg(MMC_DAT3);
 			}
 		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
 	}
 
 #ifdef	CONFIG_ARCH_OMAP16XX
 	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
+	if (mmc_conf->mmc[1].enabled) {
+		if (!mmc_conf->mmc[1].nomux) {
 			omap_cfg_reg(Y8_1610_MMC2_CMD);
 			omap_cfg_reg(Y10_1610_MMC2_CLK);
 			omap_cfg_reg(R18_1610_MMC2_CLKIN);
 			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
+			if (mmc_conf->mmc[1].wire4) {
 				omap_cfg_reg(V8_1610_MMC2_DAT1);
 				omap_cfg_reg(W15_1610_MMC2_DAT2);
 				omap_cfg_reg(R10_1610_MMC2_DAT3);
@@ -337,14 +342,55 @@ static void __init omap_init_mmc(void)
 		if (cpu_is_omap1710())
 			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
 				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
+	}
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+	const struct omap_mmc_config	*mmc_conf;
+
+	/* NOTE:  assumes MMC was never (wrongly) enabled */
+	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+	if (!mmc_conf)
+		return;
+
+	omap_init_mmc_conf(mmc_conf);
+
+	if (mmc_conf->mmc[0].enabled) {
+		mmc1_data.conf = mmc_conf->mmc[0];
+		(void) platform_device_register(&mmc_omap_device1);
+	}
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	if (mmc_conf->mmc[1].enabled) {
+		mmc2_data.conf = mmc_conf->mmc[1];
 		(void) platform_device_register(&mmc_omap_device2);
 	}
 #endif
-	return;
 }
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+	switch (host) {
+	case 1:
+		mmc1_data = *info;
+		break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	case 2:
+		mmc2_data = *info;
+		break;
+#endif
+	default:
+		BUG();
+	}
+}
+
 #else
 static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
 #endif
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index fac8e994f58..a63b644ad30 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -28,10 +28,10 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index f22506af0e6..743a4abcd85 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,10 +32,10 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <asm/hardware.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/hardware.h>
+#include <mach/dmtimer.h>
 #include <asm/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /* register offsets */
 #define _OMAP_TIMER_ID_OFFSET		0x00
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 7854f19b77c..17a92a31e74 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -23,18 +23,18 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
+#include <mach/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
@@ -182,7 +182,7 @@ void __init omapfb_reserve_sdram(void)
 		return;
 
 	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_boot_start;
+	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
 	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
 	reserved = 0;
 	for (i = 0; ; i++) {
@@ -340,5 +340,3 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 
 
 #endif
-
-
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 1903a3491ee..9e1341ebc14 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <asm/mach/irq.h>
 
 #include <asm/io.h>
@@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 	u32 gpio_bit = 1 << gpio;
 
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & __IRQT_LOWLVL);
+		trigger & IRQ_TYPE_LEVEL_LOW);
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & __IRQT_HIGHLVL);
+		trigger & IRQ_TYPE_LEVEL_HIGH);
 	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & __IRQT_RISEDGE);
+		trigger & IRQ_TYPE_EDGE_RISING);
 	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & __IRQT_FALEDGE);
+		trigger & IRQ_TYPE_EDGE_FALLING);
 
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		if (trigger != 0)
@@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 		gpio &= 0x07;
 		l = __raw_readl(reg);
 		l &= ~(3 << (gpio << 1));
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 2 << (gpio << 1);
-		if (trigger & __IRQT_FALEDGE)
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l |= 1 << (gpio << 1);
 		if (trigger)
 			/* Enable wake-up during idle for dynamic tick */
@@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
 	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
 	_set_gpio_irqenable(bank, gpio, 0);
 	_clear_gpio_irqstatus(bank, gpio);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -924,7 +924,7 @@ int omap_request_gpio(int gpio)
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
 	 */
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {
@@ -1488,6 +1488,9 @@ static int __init _omap_gpio_init(void)
 		bank->chip.set = gpio_set;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP16XX
+			bank->chip.dev = &omap_mpuio_device.dev;
+#endif
 			bank->chip.base = OMAP_MPUIO(0);
 		} else {
 			bank->chip.label = "gpio";
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 7990ab185bb..0e6d147ab6f 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,8 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
new file mode 100644
index 00000000000..5ccedac7752
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/aic23.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/plat-omap/include/mach/aic23.h
+ *
+ * Hardware definitions for TI TLV320AIC23 audio codec
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_AIC23_H
+#define __ASM_ARCH_AIC23_H
+
+// Codec TLV320AIC23
+#define LEFT_LINE_VOLUME_ADDR		0x00
+#define RIGHT_LINE_VOLUME_ADDR		0x01
+#define LEFT_CHANNEL_VOLUME_ADDR	0x02
+#define RIGHT_CHANNEL_VOLUME_ADDR	0x03
+#define ANALOG_AUDIO_CONTROL_ADDR	0x04
+#define DIGITAL_AUDIO_CONTROL_ADDR	0x05
+#define POWER_DOWN_CONTROL_ADDR		0x06
+#define DIGITAL_AUDIO_FORMAT_ADDR	0x07
+#define SAMPLE_RATE_CONTROL_ADDR	0x08
+#define DIGITAL_INTERFACE_ACT_ADDR	0x09
+#define RESET_CONTROL_ADDR		0x0F
+
+// Left (right) line input volume control register
+#define LRS_ENABLED			0x0100
+#define LIM_MUTED			0x0080
+#define LIV_DEFAULT			0x0017
+#define LIV_MAX				0x001f
+#define LIV_MIN				0x0000
+
+// Left (right) channel headphone volume control register
+#define LZC_ON				0x0080
+#define LHV_DEFAULT			0x0079
+#define LHV_MAX				0x007f
+#define LHV_MIN				0x0000
+
+// Analog audio path control register
+#define STA_REG(x)			((x)<<6)
+#define STE_ENABLED			0x0020
+#define DAC_SELECTED			0x0010
+#define BYPASS_ON			0x0008
+#define INSEL_MIC			0x0004
+#define MICM_MUTED			0x0002
+#define MICB_20DB			0x0001
+
+// Digital audio path control register
+#define DACM_MUTE			0x0008
+#define DEEMP_32K			0x0002
+#define DEEMP_44K			0x0004
+#define DEEMP_48K			0x0006
+#define ADCHP_ON			0x0001
+
+// Power control down register
+#define DEVICE_POWER_OFF	  	0x0080
+#define CLK_OFF				0x0040
+#define OSC_OFF				0x0020
+#define OUT_OFF				0x0010
+#define DAC_OFF				0x0008
+#define ADC_OFF				0x0004
+#define MIC_OFF				0x0002
+#define LINE_OFF			0x0001
+
+// Digital audio interface register
+#define MS_MASTER			0x0040
+#define LRSWAP_ON			0x0020
+#define LRP_ON				0x0010
+#define IWL_16				0x0000
+#define IWL_20				0x0004
+#define IWL_24				0x0008
+#define IWL_32				0x000C
+#define FOR_I2S				0x0002
+#define FOR_DSP				0x0003
+
+// Sample rate control register
+#define CLKOUT_HALF			0x0080
+#define CLKIN_HALF			0x0040
+#define BOSR_384fs			0x0002 // BOSR_272fs when in USB mode
+#define USB_CLK_ON			0x0001
+#define SR_MASK                         0xf
+#define CLKOUT_SHIFT                    7
+#define CLKIN_SHIFT                     6
+#define SR_SHIFT                        2
+#define BOSR_SHIFT                      1
+
+// Digital interface register
+#define ACT_ON				0x0001
+
+#define TLV320AIC23ID1                  (0x1a)	// cs low
+#define TLV320AIC23ID2                  (0x1b)	// cs high
+
+void aic23_power_up(void);
+void aic23_power_down(void);
+
+#endif /* __ASM_ARCH_AIC23_H */
diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h
new file mode 100644
index 00000000000..8d160f17137
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/blizzard.h
@@ -0,0 +1,12 @@
+#ifndef _BLIZZARD_H
+#define _BLIZZARD_H
+
+struct blizzard_platform_data {
+	void		(*power_up)(struct device *dev);
+	void		(*power_down)(struct device *dev);
+	unsigned long	(*get_clock_rate)(struct device *dev);
+
+	unsigned	te_connected : 1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
new file mode 100644
index 00000000000..cf1dc022394
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-2430sdp.h
+ *
+ * Hardware definitions for TI OMAP2430 SDP board.
+ *
+ * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_2430SDP_H
+#define __ASM_ARCH_OMAP_2430SDP_H
+
+/* Placeholder for 2430SDP specific defines */
+#define OMAP24XX_ETHR_START		 0x08000300
+#define OMAP24XX_ETHR_GPIO_IRQ		149
+#define SDP2430_CS0_BASE		0x04000000
+
+#define TWL4030_IRQNUM			INT_24XX_SYS_NIRQ
+
+#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h
new file mode 100644
index 00000000000..51b102dc906
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-ams-delta.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMS_DELTA_LATCH1_PHYS		0x01000000
+#define AMS_DELTA_LATCH1_VIRT		0xEA000000
+#define AMS_DELTA_MODEM_PHYS		0x04000000
+#define AMS_DELTA_MODEM_VIRT		0xEB000000
+#define AMS_DELTA_LATCH2_PHYS		0x08000000
+#define AMS_DELTA_LATCH2_VIRT		0xEC000000
+
+#define AMS_DELTA_LATCH1_LED_CAMERA	0x01
+#define AMS_DELTA_LATCH1_LED_ADVERT	0x02
+#define AMS_DELTA_LATCH1_LED_EMAIL	0x04
+#define AMS_DELTA_LATCH1_LED_HANDSFREE	0x08
+#define AMS_DELTA_LATCH1_LED_VOICEMAIL	0x10
+#define AMS_DELTA_LATCH1_LED_VOICE	0x20
+
+#define AMS_DELTA_LATCH2_LCD_VBLEN	0x0001
+#define AMS_DELTA_LATCH2_LCD_NDISP	0x0002
+#define AMS_DELTA_LATCH2_NAND_NCE	0x0004
+#define AMS_DELTA_LATCH2_NAND_NRE	0x0008
+#define AMS_DELTA_LATCH2_NAND_NWP	0x0010
+#define AMS_DELTA_LATCH2_NAND_NWE	0x0020
+#define AMS_DELTA_LATCH2_NAND_ALE	0x0040
+#define AMS_DELTA_LATCH2_NAND_CLE	0x0080
+#define AMD_DELTA_LATCH2_KEYBRD_PWR	0x0100
+#define AMD_DELTA_LATCH2_KEYBRD_DATA	0x0200
+#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
+#define AMS_DELTA_LATCH2_MODEM_NRESET	0x1000
+#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
+#define AMS_DELTA_GPIO_PIN_CONFIG	11
+#define AMS_DELTA_GPIO_PIN_NAND_RB	12
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch1_write(u8 mask, u8 value);
+void ams_delta_latch2_write(u16 mask, u16 value);
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
new file mode 100644
index 00000000000..d6f2a8e963d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-apollon.h
+ *
+ * Hardware definitions for Samsung OMAP24XX Apollon board.
+ *
+ * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_APOLLON_H
+#define __ASM_ARCH_OMAP_APOLLON_H
+
+extern void apollon_mmc_init(void);
+
+/* Placeholder for APOLLON specific defines */
+#define APOLLON_ETHR_GPIO_IRQ		74
+
+#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
new file mode 100644
index 00000000000..cb3c5ae1277
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-fsample.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-fsample.h
+ *
+ * Board-specific goodies for TI F-Sample.
+ *
+ * Copyright (C) 2006 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
+#define __ASM_ARCH_OMAP_FSAMPLE_H
+
+/* fsample is pretty close to p2-sample */
+#include <mach/board-perseus2.h>
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
new file mode 100644
index 00000000000..2a050e9be65
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h2.h
+ *
+ * Hardware definitions for TI OMAP1610 H2 board.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H2_H
+#define __ASM_ARCH_OMAP_H2_H
+
+/* Placeholder for H2 specific defines */
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START		0x04000300
+
+extern void h2_mmc_init(void);
+extern void h2_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /*  __ASM_ARCH_OMAP_H2_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
new file mode 100644
index 00000000000..14909dc7858
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h3.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H3_H
+#define __ASM_ARCH_OMAP_H3_H
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START		0x04000300
+
+extern void h3_mmc_init(void);
+extern void h3_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
new file mode 100644
index 00000000000..1470cd3e519
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h4.h
+ *
+ * Hardware definitions for TI OMAP1610 H4 board.
+ *
+ * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H4_H
+#define __ASM_ARCH_OMAP_H4_H
+
+/* Placeholder for H4 specific defines */
+#define OMAP24XX_ETHR_GPIO_IRQ		92
+#endif /*  __ASM_ARCH_OMAP_H4_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
new file mode 100644
index 00000000000..5ae3e79b9f9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-innovator.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-innovator.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
+#define __ASM_ARCH_OMAP_INNOVATOR_H
+
+#if defined (CONFIG_ARCH_OMAP15XX)
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
+#endif
+
+#define OMAP1510P1_IMIF_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
+
+#ifndef __ASSEMBLY__
+void fpga_write(unsigned char val, int reg);
+unsigned char fpga_read(int reg);
+#endif
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#if defined (CONFIG_ARCH_OMAP16XX)
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START	0x04000300
+
+#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
new file mode 100644
index 00000000000..2abbe001af8
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-nokia.h
@@ -0,0 +1,54 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ *  Information structures for Nokia-specific board config data
+ *
+ *  Copyright (C) 2005	Nokia Corporation
+ */
+
+#ifndef _OMAP_BOARD_NOKIA_H
+#define _OMAP_BOARD_NOKIA_H
+
+#include <linux/types.h>
+
+#define OMAP_TAG_NOKIA_BT	0x4e01
+#define OMAP_TAG_WLAN_CX3110X	0x4e02
+#define OMAP_TAG_CBUS		0x4e03
+#define OMAP_TAG_EM_ASIC_BB5	0x4e04
+
+
+#define BT_CHIP_CSR		1
+#define BT_CHIP_TI		2
+
+#define BT_SYSCLK_12		1
+#define BT_SYSCLK_38_4		2
+
+struct omap_bluetooth_config {
+	u8    chip_type;
+	u8    bt_wakeup_gpio;
+	u8    host_wakeup_gpio;
+	u8    reset_gpio;
+	u8    bt_uart;
+	u8    bd_addr[6];
+	u8    bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+	u8  chip_type;
+	s16 power_gpio;
+	s16 irq_gpio;
+	s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+	s16 clk_gpio;
+	s16 dat_gpio;
+	s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+	s16 retu_irq_gpio;
+	s16 tahvo_irq_gpio;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
new file mode 100644
index 00000000000..3850cb1f220
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-osk.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-osk.h
+ *
+ * Hardware definitions for TI OMAP5912 OSK board.
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_OSK_H
+#define __ASM_ARCH_OMAP_OSK_H
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
+#endif /*  __ASM_ARCH_OMAP_OSK_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
new file mode 100644
index 00000000000..6906cdebbcf
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmte.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten E device.
+ *
+ * Maintainters :	http://palmtelinux.sf.net
+ *			palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTE_H
+#define __OMAP_BOARD_PALMTE_H
+
+#define PALMTE_USBDETECT_GPIO	0
+#define PALMTE_USB_OR_DC_GPIO	1
+#define PALMTE_TSC_GPIO		4
+#define PALMTE_PINTDAV_GPIO	6
+#define PALMTE_MMC_WP_GPIO	8
+#define PALMTE_MMC_POWER_GPIO	9
+#define PALMTE_HDQ_GPIO		11
+#define PALMTE_HEADPHONES_GPIO	14
+#define PALMTE_SPEAKER_GPIO	15
+#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
+
+#endif	/* __OMAP_BOARD_PALMTE_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
new file mode 100644
index 00000000000..e79f382b593
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmtt.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten|T device.
+ *
+ * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTT_H
+#define __OMAP_BOARD_PALMTT_H
+
+#define PALMTT_USBDETECT_GPIO	0
+#define PALMTT_CABLE_GPIO	1
+#define PALMTT_LED_GPIO		3
+#define PALMTT_PENIRQ_GPIO	6
+#define PALMTT_MMC_WP_GPIO	8
+#define PALMTT_HDQ_GPIO		11
+
+#endif	/* __OMAP_BOARD_PALMTT_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
new file mode 100644
index 00000000000..b1d7d579b31
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmz71.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmz71.h
+ *
+ * Hardware definitions for the Palm Zire71 device.
+ *
+ * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMZ71_H
+#define __OMAP_BOARD_PALMZ71_H
+
+#define PALMZ71_USBDETECT_GPIO	0
+#define PALMZ71_PENIRQ_GPIO	6
+#define PALMZ71_MMC_WP_GPIO	8
+#define PALMZ71_HDQ_GPIO 	11
+
+#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
+
+#endif	/* __OMAP_BOARD_PALMZ71_H */
diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
new file mode 100644
index 00000000000..c06c3d717d5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-perseus2.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-perseus2.h
+ *
+ *  Copyright 2003 by Texas Instruments Incorporated
+ *    OMAP730 / Perseus2 support by Jean Pihet
+ *
+ * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
+ * Author: RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
+#define __ASM_ARCH_OMAP_PERSEUS2_H
+
+#include <mach/fpga.h>
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE		D256M_1X16_4B
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h
new file mode 100644
index 00000000000..355adbdaae3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-sx1.h
@@ -0,0 +1,52 @@
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL	0x2B
+
+#define SOFIA_I2C_ADDR		0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG	0x03
+
+#define	SOFIA_USB_POWER		0x01
+#define	SOFIA_MMC_POWER		0x04
+#define	SOFIA_BLUETOOTH_POWER	0x08
+#define	SOFIA_MMILIGHT_POWER	0x20
+
+#define SOFIA_POWER2_REG	0x04
+#define SOFIA_BACKLIGHT_REG	0x06
+#define SOFIA_KEYLIGHT_REG	0x07
+#define SOFIA_DIMMING_REG	0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
new file mode 100644
index 00000000000..ed6d346ee12
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+extern void voiceblue_reset(void);
+
+#endif /*  __ASM_ARCH_VOICEBLUE_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
new file mode 100644
index 00000000000..54445642f35
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -0,0 +1,186 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <mach/gpio-switch.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_MMC		0x4f02
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB		0x4f04
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_UART		0x4f07
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_mmc_conf {
+	unsigned enabled:1;
+	/* nomux means "standard" muxing is wrong on this board, and that
+	 * board-specific code handled it before common init logic.
+	 */
+	unsigned nomux:1;
+	/* switch pin can be for card detect (default) or card cover */
+	unsigned cover:1;
+	/* 4 wire signaling is optional, and is only used for SD/SDIO */
+	unsigned wire4:1;
+	s16 power_pin;
+	s16 switch_pin;
+	s16 wp_pin;
+};
+
+struct omap_mmc_config {
+	struct omap_mmc_conf mmc[2];
+};
+
+struct omap_serial_console_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_camera_sensor_config {
+	u16 reset_gpio;
+	int (*power_on)(void * data);
+	int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+	int default_intensity;
+	int (*set_power)(struct device *dev, int state);
+	int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+	u32 start;
+	u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+	const char *name;
+	int intensity_timer;
+	int blink_timer;
+	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	int flags:4;
+	int type:4;
+	int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+
+#include <mach/board-nokia.h>
+
+struct omap_board_config_entry {
+	u16 tag;
+	u16 len;
+	u8  data[0];
+};
+
+struct omap_board_config_kernel {
+	u16 tag;
+	const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+	((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
new file mode 100644
index 00000000000..92f7c7238fc
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/plat-omap/include/mach/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+struct clk;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+struct clksel_rate {
+	u8			div;
+	u32			val;
+	u8			flags;
+};
+
+struct clksel {
+	struct clk		 *parent;
+	const struct clksel_rate *rates;
+};
+
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+	u16			last_rounded_m;
+	u8			last_rounded_n;
+	unsigned long		last_rounded_rate;
+	unsigned int		rate_tolerance;
+	u16			max_multiplier;
+	u8			max_divider;
+	u32			max_tolerance;
+#  if defined(CONFIG_ARCH_OMAP3)
+	u8			modes;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+	void __iomem		*autoidle_reg;
+	u32			autoidle_mask;
+	void __iomem		*idlest_reg;
+	u8			idlest_bit;
+#  endif
+};
+
+#endif
+
+struct clk {
+	struct list_head	node;
+	struct module		*owner;
+	const char		*name;
+	int			id;
+	struct clk		*parent;
+	unsigned long		rate;
+	__u32			flags;
+	void __iomem		*enable_reg;
+	__u8			enable_bit;
+	__s8			usecount;
+	void			(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	u8			fixed_div;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	struct dpll_data	*dpll_data;
+#else
+	__u8			rate_offset;
+	__u8			src_offset;
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
+};
+
+struct cpufreq_frequency_table;
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	struct clk *	(*clk_get_parent)(struct clk *clk);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+	void		(*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
+};
+
+extern unsigned int mpurate;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+extern int clk_get_usecount(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+
+/* Clock flags */
+#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
+#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
+#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
+#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
+#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
+#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL	(1 << 7)
+#define CLOCK_NO_IDLE_PARENT	(1 << 8)
+#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
+#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
+#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+/* bits 13-20 are currently free */
+#define CLOCK_IN_OMAP310	(1 << 21)
+#define CLOCK_IN_OMAP730	(1 << 22)
+#define CLOCK_IN_OMAP1510	(1 << 23)
+#define CLOCK_IN_OMAP16XX	(1 << 24)
+#define CLOCK_IN_OMAP242X	(1 << 25)
+#define CLOCK_IN_OMAP243X	(1 << 26)
+#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
+#define PARENT_CONTROLS_CLOCK	(1 << 28)
+#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
+#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
+
+/* Clksel_rate flags */
+#define DEFAULT_RATE		(1 << 0)
+#define RATE_IN_242X		(1 << 1)
+#define RATE_IN_243X		(1 << 2)
+#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
+#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
+
+#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
+
+
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
+#define CORE_CLK_SRC_32K		0
+#define CORE_CLK_SRC_DPLL		1
+#define CORE_CLK_SRC_DPLL_X2		2
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
new file mode 100644
index 00000000000..06093112b66
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/plat-omap/include/mach/common.h
+ *
+ * Header for code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
+#define __ARCH_ARM_MACH_OMAP_COMMON_H
+
+#include <linux/i2c.h>
+
+struct sys_timer;
+
+extern void omap_map_common_io(void);
+extern struct sys_timer omap_timer;
+extern void omap_serial_init(void);
+#ifdef CONFIG_I2C_OMAP
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
+#endif
+
+/* IO bases for various OMAP processors */
+struct omap_globals {
+	void __iomem	*tap;		/* Control module ID code */
+	void __iomem	*sdrc;		/* SDRAM Controller */
+	void __iomem	*sms;		/* SDRAM Memory Scheduler */
+	void __iomem	*ctrl;		/* System Control Module */
+	void __iomem	*prm;		/* Power and Reset Management */
+	void __iomem	*cm;		/* Clock Management */
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
new file mode 100644
index 00000000000..e3fd62d9a99
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -0,0 +1,189 @@
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
+/*
+ * arch/arm/plat-omap/include/mach/control.h
+ *
+ * OMAP2/3 System Control Module definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+#define OMAP242X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE		0x000
+#define OMAP2_CONTROL_PADCONFS		0x030
+#define OMAP2_CONTROL_GENERAL		0x270
+#define OMAP343X_CONTROL_MEM_WKUP	0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file.  Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
+#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
+#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
+#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
+#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
+#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
+#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+extern void __iomem *omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+#else
+#define omap_ctrl_base_get()		0
+#define omap_ctrl_readb(x)		0
+#define omap_ctrl_readw(x)		0
+#define omap_ctrl_readl(x)		0
+#define omap_ctrl_writeb(x, y)		WARN_ON(1)
+#define omap_ctrl_writew(x, y)		WARN_ON(1)
+#define omap_ctrl_writel(x, y)		WARN_ON(1)
+#endif
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_CONTROL_H */
+
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
new file mode 100644
index 00000000000..05aee0eda34
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -0,0 +1,402 @@
+/*
+ * arch/arm/plat-omap/include/mach/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+struct omap_chip_id {
+	u8 oc;
+};
+
+#define OMAP_CHIP_INIT(x)	{ .oc = x }
+
+extern unsigned int system_rev;
+
+#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3430
+# endif
+#endif
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():	True for OMAP2430
+ * cpu_is_omap343x():	True for OMAP3430
+ */
+#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap242x()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap343x()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  undef  cpu_is_omap242x
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap24xx()		is_omap24xx()
+#  define cpu_is_omap242x()		is_omap242x()
+#  define cpu_is_omap243x()		is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()		is_omap34xx()
+#  define cpu_is_omap343x()		is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap330():	True for OMAP330
+ * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ * cpu_is_omap2420():	True for OMAP2420
+ * cpu_is_omap2422():	True for OMAP2422
+ * cpu_is_omap2423():	True for OMAP2423
+ * cpu_is_omap2430():	True for OMAP2430
+ * cpu_is_omap3430():	True for OMAP3430
+ */
+#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap730()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+#define cpu_is_omap2420()		0
+#define cpu_is_omap2422()		0
+#define cpu_is_omap2423()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap3430()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		is_omap730()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		1
+# endif
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()		is_omap2420()
+# define cpu_is_omap2422()		is_omap2422()
+# define cpu_is_omap2423()		is_omap2423()
+# define cpu_is_omap2430()		is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap3430
+# define cpu_is_omap3430()		is_omap3430()
+#endif
+
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
+				cpu_is_omap16xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+/*
+ * Macros to detect silicon revision of OMAP2/3 processors.
+ * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
+ * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
+ * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
+ * get_sil_rev:			return the silicon rev value.
+ */
+#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
+#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
+
+#define is_sil_rev_greater_than(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) > get_sil_revision(rev)))
+
+#define is_sil_rev_less_than(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) < get_sil_revision(rev)))
+
+#define is_sil_rev_equal_to(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) == get_sil_revision(rev)))
+
+#define get_sil_rev() \
+		get_sil_revision(system_rev)
+
+/* Various silicon macros defined here */
+#define OMAP2420_REV_ES1_0	0x24200000
+#define OMAP2420_REV_ES2_0	0x24201000
+#define OMAP2430_REV_ES1_0	0x24300000
+#define OMAP3430_REV_ES1_0	0x34300000
+#define OMAP3430_REV_ES2_0	0x34301000
+#define OMAP3430_REV_ES2_1	0x34302000
+#define OMAP3430_REV_ES2_2	0x34303000
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420       (1 << 0)
+#define CHIP_IS_OMAP2430       (1 << 1)
+#define CHIP_IS_OMAP3430       (1 << 2)
+#define CHIP_IS_OMAP3430ES1    (1 << 3)
+#define CHIP_IS_OMAP3430ES2    (1 << 4)
+
+#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+int omap_chip_is(struct omap_chip_id oci);
+
+
+/*
+ * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define DEVICE_TYPE_TEST	0
+#define DEVICE_TYPE_EMU		1
+#define DEVICE_TYPE_SEC		2
+#define DEVICE_TYPE_GP		3
+#define DEVICE_TYPE_BAD		4
+
+#define get_device_type()	((system_rev & 0x700) >> 8)
+#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
+#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
+#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
+#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
+#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
+
+void omap2_check_revision(void);
+
+#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
new file mode 100644
index 00000000000..1b0039bdeb4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/plat-omap/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+#ifdef CONFIG_ARCH_OMAP1
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		orr	\rx, \rx, #0x00009000	@ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+
+#elif  CONFIG_ARCH_OMAP2
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00004000	@ UART 3
+#endif
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
new file mode 100644
index 00000000000..54fe9665b18
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -0,0 +1,570 @@
+/*
+ *  arch/arm/plat-omap/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Hardware registers for omap1 */
+#define OMAP1_DMA_BASE			(0xfffed800)
+
+#define OMAP1_DMA_GCR			0x400
+#define OMAP1_DMA_GSCR			0x404
+#define OMAP1_DMA_GRST			0x408
+#define OMAP1_DMA_HW_ID			0x442
+#define OMAP1_DMA_PCH2_ID		0x444
+#define OMAP1_DMA_PCH0_ID		0x446
+#define OMAP1_DMA_PCH1_ID		0x448
+#define OMAP1_DMA_PCHG_ID		0x44a
+#define OMAP1_DMA_PCHD_ID		0x44c
+#define OMAP1_DMA_CAPS_0_U		0x44e
+#define OMAP1_DMA_CAPS_0_L		0x450
+#define OMAP1_DMA_CAPS_1_U		0x452
+#define OMAP1_DMA_CAPS_1_L		0x454
+#define OMAP1_DMA_CAPS_2		0x456
+#define OMAP1_DMA_CAPS_3		0x458
+#define OMAP1_DMA_CAPS_4		0x45a
+#define OMAP1_DMA_PCH2_SR		0x460
+#define OMAP1_DMA_PCH0_SR		0x480
+#define OMAP1_DMA_PCH1_SR		0x482
+#define OMAP1_DMA_PCHD_SR		0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION		0x00
+#define OMAP_DMA4_GCR			0x78
+#define OMAP_DMA4_IRQSTATUS_L0		0x08
+#define OMAP_DMA4_IRQSTATUS_L1		0x0c
+#define OMAP_DMA4_IRQSTATUS_L2		0x10
+#define OMAP_DMA4_IRQSTATUS_L3		0x14
+#define OMAP_DMA4_IRQENABLE_L0		0x18
+#define OMAP_DMA4_IRQENABLE_L1		0x1c
+#define OMAP_DMA4_IRQENABLE_L2		0x20
+#define OMAP_DMA4_IRQENABLE_L3		0x24
+#define OMAP_DMA4_SYSSTATUS		0x28
+#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
+#define OMAP_DMA4_CAPS_0		0x64
+#define OMAP_DMA4_CAPS_2		0x6c
+#define OMAP_DMA4_CAPS_3		0x70
+#define OMAP_DMA4_CAPS_4		0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT	17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap1 */
+#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
+#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
+#define OMAP1_DMA_CCEN(n)		0
+#define OMAP1_DMA_CCFN(n)		0
+
+/* Channel specific registers only on omap2 */
+#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION		0
+#define OMAP1_DMA_IRQSTATUS_L0		0
+#define OMAP1_DMA_IRQENABLE_L0		0
+#define OMAP1_DMA_OCP_SYSCONFIG		0
+#define OMAP_DMA4_HW_ID			0
+#define OMAP_DMA4_CAPS_0_L		0
+#define OMAP_DMA4_CAPS_0_U		0
+#define OMAP_DMA4_CAPS_1_L		0
+#define OMAP_DMA4_CAPS_1_U		0
+#define OMAP_DMA4_GSCR			0
+#define OMAP_DMA4_CPC(n)		0
+
+#define OMAP_DMA4_LCH_CTRL(n)		0
+#define OMAP_DMA4_COLOR_L(n)		0
+#define OMAP_DMA4_COLOR_U(n)		0
+#define OMAP_DMA4_CCR2(n)		0
+#define OMAP1_DMA_CSSA(n)		0
+#define OMAP1_DMA_CDSA(n)		0
+#define OMAP_DMA4_CSSA_L(n)		0
+#define OMAP_DMA4_CSSA_U(n)		0
+#define OMAP_DMA4_CDSA_L(n)		0
+#define OMAP_DMA4_CDSA_U(n)		0
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE		0
+#define OMAP_DMA_MCSI1_TX		1
+#define OMAP_DMA_MCSI1_RX		2
+#define OMAP_DMA_I2C_RX			3
+#define OMAP_DMA_I2C_TX			4
+#define OMAP_DMA_EXT_NDMA_REQ		5
+#define OMAP_DMA_EXT_NDMA_REQ2		6
+#define OMAP_DMA_UWIRE_TX		7
+#define OMAP_DMA_MCBSP1_TX		8
+#define OMAP_DMA_MCBSP1_RX		9
+#define OMAP_DMA_MCBSP3_TX		10
+#define OMAP_DMA_MCBSP3_RX		11
+#define OMAP_DMA_UART1_TX		12
+#define OMAP_DMA_UART1_RX		13
+#define OMAP_DMA_UART2_TX		14
+#define OMAP_DMA_UART2_RX		15
+#define OMAP_DMA_MCBSP2_TX		16
+#define OMAP_DMA_MCBSP2_RX		17
+#define OMAP_DMA_UART3_TX		18
+#define OMAP_DMA_UART3_RX		19
+#define OMAP_DMA_CAMERA_IF_RX		20
+#define OMAP_DMA_MMC_TX			21
+#define OMAP_DMA_MMC_RX			22
+#define OMAP_DMA_NAND			23
+#define OMAP_DMA_IRQ_LCD_LINE		24
+#define OMAP_DMA_MEMORY_STICK		25
+#define OMAP_DMA_USB_W2FC_RX0		26
+#define OMAP_DMA_USB_W2FC_RX1		27
+#define OMAP_DMA_USB_W2FC_RX2		28
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_TX1		30
+#define OMAP_DMA_USB_W2FC_TX2		31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN		32
+#define OMAP_DMA_SPI_TX			33
+#define OMAP_DMA_SPI_RX			34
+#define OMAP_DMA_CRYPTO_HASH		35
+#define OMAP_DMA_CCP_ATTN		36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
+#define OMAP_DMA_MMC2_TX		54
+#define OMAP_DMA_MMC2_RX		55
+#define OMAP_DMA_CRYPTO_DES_OUT		56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE		0
+#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
+#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
+#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
+#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
+#define OMAP_DMA_DROP_IRQ		(1 << 1)
+#define OMAP_DMA_HALF_IRQ		(1 << 2)
+#define OMAP_DMA_FRAME_IRQ		(1 << 3)
+#define OMAP_DMA_LAST_IRQ		(1 << 4)
+#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
+#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP2_DMA_PKT_IRQ		(1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
+
+#define OMAP_DMA_DATA_TYPE_S8		0x00
+#define OMAP_DMA_DATA_TYPE_S16		0x01
+#define OMAP_DMA_DATA_TYPE_S32		0x02
+
+#define OMAP_DMA_SYNC_ELEMENT		0x00
+#define OMAP_DMA_SYNC_FRAME		0x01
+#define OMAP_DMA_SYNC_BLOCK		0x02
+#define OMAP_DMA_SYNC_PACKET		0x03
+
+#define OMAP_DMA_SRC_SYNC		0x01
+#define OMAP_DMA_DST_SYNC		0x00
+
+#define OMAP_DMA_PORT_EMIFF		0x00
+#define OMAP_DMA_PORT_EMIFS		0x01
+#define OMAP_DMA_PORT_OCP_T1		0x02
+#define OMAP_DMA_PORT_TIPB		0x03
+#define OMAP_DMA_PORT_OCP_T2		0x04
+#define OMAP_DMA_PORT_MPUI		0x05
+
+#define OMAP_DMA_AMODE_CONSTANT		0x00
+#define OMAP_DMA_AMODE_POST_INC		0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH		0x10
+#define DMA_DEFAULT_ARB_RATE		0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
+#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75		(0x01 << 14)
+#define DMA_THREAD_FIFO_25		(0x02 << 14)
+#define DMA_THREAD_FIFO_50		(0x03 << 14)
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN		0x1
+#define OMAP_DMA_DYNAMIC_CHAIN		0x2
+#define OMAP_DMA_CHAIN_ACTIVE		0x1
+#define OMAP_DMA_CHAIN_INACTIVE		0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH		0x1
+#define DMA_CH_PRIO_LOW			0x0 /* Def */
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+enum omap_dma_burst_mode {
+	OMAP_DMA_DATA_BURST_DIS = 0,
+	OMAP_DMA_DATA_BURST_4,
+	OMAP_DMA_DATA_BURST_8,
+	OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+	OMAP_DMA_LITTLE_ENDIAN = 0,
+	OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+	OMAP_DMA_COLOR_DIS = 0,
+	OMAP_DMA_CONSTANT_FILL,
+	OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+	OMAP_DMA_WRITE_NON_POSTED = 0,
+	OMAP_DMA_WRITE_POSTED,
+	OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+	OMAP_DMA_LCH_2D = 0,
+	OMAP_DMA_LCH_G,
+	OMAP_DMA_LCH_P,
+	OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+	int data_type;		/* data type 8,16,32 */
+	int elem_count;		/* number of elements in a frame */
+	int frame_count;	/* number of frames in a element */
+
+	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int src_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long src_start;	/* source address : physical */
+	int src_ei;		/* source element index */
+	int src_fi;		/* source frame index */
+
+	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int dst_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long dst_start;	/* source address : physical */
+	int dst_ei;		/* source element index */
+	int dst_fi;		/* source frame index */
+
+	int trigger;		/* trigger attached if the channel is
+					synchronized */
+	int sync_mode;		/* sycn on element, frame , block or packet */
+	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
+
+	int ie;			/* interrupt enabled */
+
+	unsigned char read_prio;/* read priority */
+	unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+					 int elem_count, int frame_count,
+					 int sync_mode,
+					 int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+				    u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+				    unsigned long src_start,
+				    int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+					enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+				     unsigned long dest_start,
+				     int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+					 enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+				struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+				       int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+				 unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+				  void (*callback) (int chain_id, u16 ch_status,
+						    void *data),
+				  int *chain_id, int no_of_chans,
+				  int chain_mode,
+				  struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+				     int dest_start, int elem_count,
+				     int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+					struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
new file mode 100644
index 00000000000..6dc70313821
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/plat-omap/include/mach/dmtimer.h
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK			0x00
+#define OMAP_TIMER_SRC_32_KHZ			0x01
+#define OMAP_TIMER_SRC_EXT_CLK			0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
+#define OMAP_TIMER_INT_MATCH			(1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE			0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
+
+struct omap_dm_timer;
+struct clk;
+
+int omap_dm_timer_init(void);
+
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+void omap_dm_timer_free(struct omap_dm_timer *timer);
+void omap_dm_timer_enable(struct omap_dm_timer *timer);
+void omap_dm_timer_disable(struct omap_dm_timer *timer);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer);
+void omap_dm_timer_start(struct omap_dm_timer *timer);
+void omap_dm_timer_stop(struct omap_dm_timer *timer);
+
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+
+int omap_dm_timers_active(void);
+
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h
new file mode 100644
index 00000000000..da97736f3ef
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dsp_common.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1)
+ *
+ * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef ASM_ARCH_DSP_COMMON_H
+#define ASM_ARCH_DSP_COMMON_H
+
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK)
+extern void omap_dsp_request_mpui(void);
+extern void omap_dsp_release_mpui(void);
+extern int omap_dsp_request_mem(void);
+extern int omap_dsp_release_mem(void);
+#else
+static inline int omap_dsp_request_mem(void)
+{
+	return 0;
+}
+#define omap_dsp_release_mem()	do {} while (0)
+#endif
+
+#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
new file mode 100644
index 00000000000..9e62cf03027
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/eac.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/plat-omap/include/mach2/eac.h
+ *
+ * Defines for Enhanced Audio Controller
+ *
+ * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
+#define __ASM_ARM_ARCH_OMAP2_EAC_H
+
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <sound/core.h>
+
+/* master codec clock source */
+#define EAC_MCLK_EXT_MASK	0x100
+enum eac_mclk_src {
+	EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
+	EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
+	EAC_MCLK_EXT_12288000,
+	EAC_MCLK_EXT_2x11289600,
+	EAC_MCLK_EXT_2x12288000,
+};
+
+/* codec port interface mode */
+enum eac_codec_mode {
+	EAC_CODEC_PCM,
+	EAC_CODEC_AC97,
+	EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
+	EAC_CODEC_I2S_SLAVE,
+};
+
+/* configuration structure for I2S mode */
+struct eac_i2s_conf {
+	/* if enabled, then first data slot (left channel) is signaled as
+	 * positive level of frame sync EAC.AC_FS */
+	unsigned	polarity_changed_mode:1;
+	/* if enabled, then serial data starts one clock cycle after the
+	 * of EAC.AC_FS for first audio slot */
+	unsigned	sync_delay_enable:1;
+};
+
+/* configuration structure for EAC codec port */
+struct eac_codec {
+	enum eac_mclk_src	mclk_src;
+
+	enum eac_codec_mode	codec_mode;
+	union {
+		struct eac_i2s_conf	i2s;
+	} codec_conf;
+
+	int		default_rate; /* audio sampling rate */
+
+	int		(* set_power)(void *private_data, int dac, int adc);
+	int		(* register_controls)(void *private_data,
+					      struct snd_card *card);
+	const char 	*short_name;
+
+	void		*private_data;
+};
+
+/* structure for passing platform dependent data to the EAC driver */
+struct eac_platform_data {
+        int	(* init)(struct device *eac_dev);
+	void	(* cleanup)(struct device *eac_dev);
+	/* these callbacks are used to configure & control external MCLK
+	 * source. NULL if not used */
+	int	(* enable_ext_clocks)(struct device *eac_dev);
+	void	(* disable_ext_clocks)(struct device *eac_dev);
+};
+
+extern void omap_init_eac(struct eac_platform_data *pdata);
+
+extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
+extern void eac_unregister_codec(struct device *eac_dev);
+
+extern int eac_set_mode(struct device *eac_dev, int play, int rec);
+
+#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
new file mode 100644
index 00000000000..d4e9043bf20
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#if defined(CONFIG_ARCH_OMAP730) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ		INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#include <mach/omap24xx.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP2_VA_IC_BASE
+		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+		cmp	\irqnr, #0x0
+2222:
+		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
+
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
new file mode 100644
index 00000000000..c92e4b42b28
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
+extern void omap1510_fpga_init_irq(void);
+#else
+#define omap1510_fpga_init_irq()	(0)
+#endif
+
+#define fpga_read(reg)			__raw_readb(reg)
+#define fpga_write(val, reg)		__raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE		0xE8000000	/* VA */
+#define H2P2_DBG_FPGA_SIZE		SZ_4K		/* SIZE */
+#define H2P2_DBG_FPGA_START		0x04000000	/* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
+#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
+
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+	/* offset 0x00 */
+	u16		smc91x[8];
+	/* offset 0x10 */
+	u16		fpga_rev;
+	u16		board_rev;
+	u16		gpio_outputs;
+	u16		leds;
+	/* offset 0x18 */
+	u16		misc_inputs;
+	u16		lan_status;
+	u16		lan_reset;
+	u16		reserved0;
+	/* offset 0x20 */
+	u16		ps2_data;
+	u16		ps2_ctrl;
+	/* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
+#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE			0xE8000000	/* Virtual */
+#define OMAP1510_FPGA_SIZE			SZ_4K
+#define OMAP1510_FPGA_START			0x08000000	/* Physical */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE		0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
+#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
+#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
+#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h
new file mode 100644
index 00000000000..10da0e07c0c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio-switch.h
@@ -0,0 +1,54 @@
+/*
+ * GPIO switch definitions
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
+#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
+
+#include <linux/types.h>
+
+/* Cover:
+ *	high -> closed
+ *	low  -> open
+ * Connection:
+ *	high -> connected
+ *	low  -> disconnected
+ * Activity:
+ *	high -> active
+ *	low  -> inactive
+ *
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
+#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY		0x0002
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED		0x0001
+#define OMAP_GPIO_SWITCH_FLAG_OUTPUT		0x0002
+
+struct omap_gpio_switch {
+	const char *name;
+	s16 gpio;
+	unsigned flags:4;
+	unsigned type:4;
+
+	/* Time in ms to debounce when transitioning from
+	 * inactive state to active state. */
+	u16 debounce_rising;
+	/* Same for transition from active to inactive state. */
+	u16 debounce_falling;
+
+	/* notify board-specific code about state changes */
+	void (* notify)(void *data, int state);
+	void *notify_data;
+};
+
+/* Call at init time only */
+extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
+					int count);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
new file mode 100644
index 00000000000..94ce2780e8e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
+
+#ifdef CONFIG_ARCH_OMAP730
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x02
+#define OMAP_MPUIO_IO_CNTL		0x04
+#define OMAP_MPUIO_KBR_LATCH		0x08
+#define OMAP_MPUIO_KBC			0x0a
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
+#define OMAP_MPUIO_KBD_INT		0x10
+#define OMAP_MPUIO_GPIO_INT		0x12
+#define OMAP_MPUIO_KBD_MASKIT		0x14
+#define OMAP_MPUIO_GPIO_MASKIT		0x16
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
+#define OMAP_MPUIO_LATCH		0x1a
+#else
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x04
+#define OMAP_MPUIO_IO_CNTL		0x08
+#define OMAP_MPUIO_KBR_LATCH		0x10
+#define OMAP_MPUIO_KBC			0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
+#define OMAP_MPUIO_KBD_INT		0x20
+#define OMAP_MPUIO_GPIO_INT		0x24
+#define OMAP_MPUIO_KBD_MASKIT		0x28
+#define OMAP_MPUIO_GPIO_MASKIT		0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
+#define OMAP_MPUIO_LATCH		0x34
+#endif
+
+#define OMAP34XX_NR_GPIOS		6
+
+#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
+				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
+				 IH_GPIO_BASE + (nr))
+
+extern int omap_gpio_init(void);	/* Call from board init only */
+extern int omap_request_gpio(int gpio);
+extern void omap_free_gpio(int gpio);
+extern void omap_set_gpio_direction(int gpio, int is_input);
+extern void omap_set_gpio_dataout(int gpio, int enable);
+extern int omap_get_gpio_datain(int gpio);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
+		return OMAP_GPIO_IRQ(gpio);
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
+		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
+	return irq - IH_GPIO_BASE;
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
new file mode 100644
index 00000000000..90444a0d6b1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpioexpander.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpioexpander.h
+ *
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
+#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
+
+/* Function Prototypes for GPIO Expander functions */
+
+#ifdef CONFIG_GPIOEXPANDER_OMAP
+int read_gpio_expa(u8 *, int);
+int write_gpio_expa(u8 , int);
+#else
+static inline int read_gpio_expa(u8 *val, int addr)
+{
+	return 0;
+}
+static inline int write_gpio_expa(u8 val, int addr)
+{
+	return 0;
+}
+#endif
+
+#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
new file mode 100644
index 00000000000..6a8e07ffc2d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -0,0 +1,96 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+#define GPMC_CS_CONFIG1		0x00
+#define GPMC_CS_CONFIG2		0x04
+#define GPMC_CS_CONFIG3		0x08
+#define GPMC_CS_CONFIG4		0x0c
+#define GPMC_CS_CONFIG5		0x10
+#define GPMC_CS_CONFIG6		0x14
+#define GPMC_CS_CONFIG7		0x18
+#define GPMC_CS_NAND_COMMAND	0x1c
+#define GPMC_CS_NAND_ADDRESS	0x20
+#define GPMC_CS_NAND_DATA	0x24
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+
+/*
+ * Note that all values in this struct are in nanoseconds, while
+ * the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+	/* Minimum clock period for synchronous mode */
+	u16 sync_clk;
+
+	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+	u16 cs_on;		/* Assertion time */
+	u16 cs_rd_off;		/* Read deassertion time */
+	u16 cs_wr_off;		/* Write deassertion time */
+
+	/* ADV signal timings corresponding to GPMC_CONFIG3 */
+	u16 adv_on;		/* Assertion time */
+	u16 adv_rd_off;		/* Read deassertion time */
+	u16 adv_wr_off;		/* Write deassertion time */
+
+	/* WE signals timings corresponding to GPMC_CONFIG4 */
+	u16 we_on;		/* WE assertion time */
+	u16 we_off;		/* WE deassertion time */
+
+	/* OE signals timings corresponding to GPMC_CONFIG4 */
+	u16 oe_on;		/* OE assertion time */
+	u16 oe_off;		/* OE deassertion time */
+
+	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+	u16 page_burst_access;	/* Multiple access word delay */
+	u16 access;		/* Start-cycle to first data valid delay */
+	u16 rd_cycle;		/* Total read cycle time */
+	u16 wr_cycle;		/* Total write cycle time */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
+extern unsigned long gpmc_get_fclk_period(void);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_cs_set_reserved(int cs, int reserved);
+extern int gpmc_cs_reserved(int cs);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
new file mode 100644
index 00000000000..07f5d7f2152
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -0,0 +1,355 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <mach/cpu.h>
+#endif
+#include <mach/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap730.h"
+#include "omap1510.h"
+#include "omap24xx.h"
+#include "omap16xx.h"
+#include "omap34xx.h"
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_2430SDP
+#include "board-2430sdp.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_APOLLON
+#include "board-apollon.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+#include "board-palmte.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMZ71
+#include "board-palmz71.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTT
+#include "board-palmtt.h"
+#endif
+
+#ifdef CONFIG_MACH_SX1
+#include "board-sx1.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
new file mode 100644
index 00000000000..577f492f2d3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -0,0 +1,12 @@
+#ifndef _HWA742_H
+#define _HWA742_H
+
+struct hwa742_platform_data {
+	void		(*power_up)(struct device *dev);
+	void		(*power_down)(struct device *dev);
+	unsigned long	(*get_clock_rate)(struct device *dev);
+
+	unsigned	te_connected:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
new file mode 100644
index 00000000000..2a30b7d88cd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define PCIO_BASE	0
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#define IO_PHYS		0xFFFB0000
+#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_SIZE		0x40000
+#define IO_VIRT		(IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define io_p2v(pa)	((pa) - IO_OFFSET)
+#define io_v2p(va)	((va) + IO_OFFSET)
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
+#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
+#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
+#define L4_WK_243X_VIRT		0xd9000000
+#define L4_WK_243X_SIZE		SZ_1M
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
+#define OMAP243X_GPMC_VIRT	0xFE000000
+#define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT	0xFD000000
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT	0xFC000000
+#define OMAP243X_SMS_SIZE	SZ_1M
+
+#endif
+
+#define IO_OFFSET	0x90000000
+#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_24XX_VIRT	0xe0000000
+#define DSP_MEM_24XX_SIZE	0x28000
+#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_24XX_VIRT	0xe1000000
+#define DSP_IPI_24XX_SIZE	SZ_4K
+#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_24XX_VIRT	0xe2000000
+#define DSP_MMU_24XX_SIZE	SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
+#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
+#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_SIZE		SZ_1M
+
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_SIZE	SZ_1M
+
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT	0xe4000000
+#define L4_EMU_34XX_SIZE	SZ_64M
+
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_SIZE	SZ_1M
+
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_SIZE	SZ_1M
+
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_34XX_VIRT	0xe0000000
+#define DSP_MEM_34XX_SIZE	0x28000
+#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_34XX_VIRT	0xe1000000
+#define DSP_IPI_34XX_SIZE	SZ_4K
+#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT	0xe2000000
+#define DSP_MMU_34XX_SIZE	SZ_4K
+
+#endif
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the OMAP IO region
+ *
+ * NOTE: - Use omap_read/write[bwl] for physical register addresses
+ *	 - Use __raw_read/write[bwl]() for virtual register addresses
+ *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ *	 - DO NOT use hardcoded virtual addresses to allow changing the
+ *	   IO address space again if needed
+ */
+#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
+#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
+#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
+
+#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
+#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
new file mode 100644
index 00000000000..8372a00d8e0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irda.h
+ *
+ *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL		1	/* Selects IrDA */
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+#define IR_MIRMODE	8
+
+struct omap_irda_config {
+	int transceiver_cap;
+	int (*transceiver_mode)(struct device *dev, int mode);
+	int (*select_irda)(struct device *dev, int state);
+	/* Very specific to the needs of some platforms (h3,h4)
+	 * having calls which can sleep in irda_set_speed.
+	 */
+	struct delayed_work gpio_expa;
+	int rx_channel;
+	int tx_channel;
+	unsigned long dest_start;
+	unsigned long src_start;
+	int tx_trigger;
+	int rx_trigger;
+	int mode;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
new file mode 100644
index 00000000000..17248bbf3f2
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -0,0 +1,332 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_DMA_LCD		25
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	0
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_730_IH2_FIQ		0
+#define INT_730_IH2_IRQ		1
+#define INT_730_USB_NON_ISO	2
+#define INT_730_USB_ISO		3
+#define INT_730_ICR		4
+#define INT_730_EAC		5
+#define INT_730_GPIO_BANK1	6
+#define INT_730_GPIO_BANK2	7
+#define INT_730_GPIO_BANK3	8
+#define INT_730_McBSP2TX	10
+#define INT_730_McBSP2RX	11
+#define INT_730_McBSP2RX_OVF	12
+#define INT_730_LCD_LINE	14
+#define INT_730_GSM_PROTECT	15
+#define INT_730_TIMER3		16
+#define INT_730_GPIO_BANK5	17
+#define INT_730_GPIO_BANK6	18
+#define INT_730_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_730_HW_ERRORS	(0 + IH2_BASE)
+#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_730_CFCD		(2 + IH2_BASE)
+#define INT_730_CFIREQ		(3 + IH2_BASE)
+#define INT_730_I2C		(4 + IH2_BASE)
+#define INT_730_PCC		(5 + IH2_BASE)
+#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_730_SPI_100K_1	(7 + IH2_BASE)
+#define INT_730_SYREN_SPI	(8 + IH2_BASE)
+#define INT_730_VLYNQ		(9 + IH2_BASE)
+#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_730_McBSP1TX	(11 + IH2_BASE)
+#define INT_730_McBSP1RX	(12 + IH2_BASE)
+#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_730_MCSI		(16 + IH2_BASE)
+#define INT_730_uWireTX		(17 + IH2_BASE)
+#define INT_730_uWireRX		(18 + IH2_BASE)
+#define INT_730_SMC_CD		(19 + IH2_BASE)
+#define INT_730_SMC_IREQ	(20 + IH2_BASE)
+#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_730_TIMER32K	(22 + IH2_BASE)
+#define INT_730_MMC_SDIO	(23 + IH2_BASE)
+#define INT_730_UPLD		(24 + IH2_BASE)
+#define INT_730_USB_HHC_1	(27 + IH2_BASE)
+#define INT_730_USB_HHC_2	(28 + IH2_BASE)
+#define INT_730_USB_GENI	(29 + IH2_BASE)
+#define INT_730_USB_OTG		(30 + IH2_BASE)
+#define INT_730_CAMERA_IF	(31 + IH2_BASE)
+#define INT_730_RNG		(32 + IH2_BASE)
+#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_730_SHA1_MD5	(36 + IH2_BASE)
+#define INT_730_SPI_100K_2	(37 + IH2_BASE)
+#define INT_730_RNG_IDLE	(38 + IH2_BASE)
+#define INT_730_MPUIO		(39 + IH2_BASE)
+#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_730_DMA_CH6		(53 + IH2_BASE)
+#define INT_730_DMA_CH7		(54 + IH2_BASE)
+#define INT_730_DMA_CH8		(55 + IH2_BASE)
+#define INT_730_DMA_CH9		(56 + IH2_BASE)
+#define INT_730_DMA_CH10	(57 + IH2_BASE)
+#define INT_730_DMA_CH11	(58 + IH2_BASE)
+#define INT_730_DMA_CH12	(59 + IH2_BASE)
+#define INT_730_DMA_CH13	(60 + IH2_BASE)
+#define INT_730_DMA_CH14	(61 + IH2_BASE)
+#define INT_730_DMA_CH15	(62 + IH2_BASE)
+#define INT_730_NAND		(63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ	7
+#define INT_24XX_SDMA_IRQ0	12
+#define INT_24XX_SDMA_IRQ1	13
+#define INT_24XX_SDMA_IRQ2	14
+#define INT_24XX_SDMA_IRQ3	15
+#define INT_24XX_CAM_IRQ	24
+#define INT_24XX_DSS_IRQ	25
+#define INT_24XX_MAIL_U0_MPU	26
+#define INT_24XX_DSP_UMA	27
+#define INT_24XX_DSP_MMU	28
+#define INT_24XX_GPIO_BANK1	29
+#define INT_24XX_GPIO_BANK2	30
+#define INT_24XX_GPIO_BANK3	31
+#define INT_24XX_GPIO_BANK4	32
+#define INT_24XX_GPIO_BANK5	33
+#define INT_24XX_MAIL_U3_MPU	34
+#define INT_24XX_GPTIMER1	37
+#define INT_24XX_GPTIMER2	38
+#define INT_24XX_GPTIMER3	39
+#define INT_24XX_GPTIMER4	40
+#define INT_24XX_GPTIMER5	41
+#define INT_24XX_GPTIMER6	42
+#define INT_24XX_GPTIMER7	43
+#define INT_24XX_GPTIMER8	44
+#define INT_24XX_GPTIMER9	45
+#define INT_24XX_GPTIMER10	46
+#define INT_24XX_GPTIMER11	47
+#define INT_24XX_GPTIMER12	48
+#define INT_24XX_I2C1_IRQ	56
+#define INT_24XX_I2C2_IRQ	57
+#define INT_24XX_MCBSP1_IRQ_TX	59
+#define INT_24XX_MCBSP1_IRQ_RX	60
+#define INT_24XX_MCBSP2_IRQ_TX	62
+#define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_UART1_IRQ	72
+#define INT_24XX_UART2_IRQ	73
+#define INT_24XX_UART3_IRQ	74
+#define INT_24XX_USB_IRQ_GEN	75
+#define INT_24XX_USB_IRQ_NISO	76
+#define INT_24XX_USB_IRQ_ISO	77
+#define INT_24XX_USB_IRQ_HGEN	78
+#define INT_24XX_USB_IRQ_HSOF	79
+#define INT_24XX_USB_IRQ_OTG	80
+#define INT_24XX_MMC_IRQ	83
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
+#ifdef	CONFIG_TWL4030_CORE
+#define	TWL4030_BASE_NR_IRQS	8
+#define	TWL4030_PWR_NR_IRQS	8
+#else
+#define	TWL4030_BASE_NR_IRQS	0
+#define	TWL4030_PWR_NR_IRQS	0
+#endif
+#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
+#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
+#ifdef	CONFIG_TWL4030_GPIO
+#define TWL4030_GPIO_NR_IRQS	18
+#else
+#define	TWL4030_GPIO_NR_IRQS	0
+#endif
+#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS			TWL4030_GPIO_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#ifndef __ASSEMBLY__
+extern void omap_init_irq(void);
+#endif
+
+#include <mach/hardware.h>
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
new file mode 100644
index 00000000000..232923aaf61
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/plat-omap/include/mach/keypad.h
+ *
+ *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+struct omap_kp_platform_data {
+	int rows;
+	int cols;
+	int *keymap;
+	unsigned int keymapsize;
+	unsigned int rep:1;
+	unsigned long delay;
+	unsigned int dbounce:1;
+	/* specific to OMAP242x*/
+	unsigned int *row_gpios;
+	unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. */
+#define GROUP_0		(0 << 16)
+#define GROUP_1		(1 << 16)
+#define GROUP_2		(2 << 16)
+#define GROUP_3		(3 << 16)
+#define GROUP_MASK	GROUP_3
+
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
new file mode 100644
index 00000000000..f8fbc4801e5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/lcd_mipid.h
@@ -0,0 +1,24 @@
+#ifndef __LCD_MIPID_H
+#define __LCD_MIPID_H
+
+enum mipid_test_num {
+	MIPID_TEST_RGB_LINES,
+};
+
+enum mipid_test_result {
+	MIPID_TEST_SUCCESS,
+	MIPID_TEST_INVALID,
+	MIPID_TEST_FAILED,
+};
+
+#ifdef __KERNEL__
+
+struct mipid_platform_data {
+	int	nreset_gpio;
+	int	data_lines;
+	void	(*shutdown)(struct mipid_platform_data *pdata);
+};
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/mach/led.h
new file mode 100644
index 00000000000..25e451e7e2f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/led.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/plat-omap/include/mach/led.h
+ *
+ *  Copyright (C) 2006 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_LED_H
+#define ASMARM_ARCH_LED_H
+
+struct omap_led_config {
+	struct led_classdev	cdev;
+	s16			gpio;
+};
+
+struct omap_led_platform_data {
+	s16			nr_leds;
+	struct omap_led_config	*leds;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
new file mode 100644
index 00000000000..7cbed9332e1
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
@@ -0,0 +1,73 @@
+/* mailbox.h */
+
+#ifndef MAILBOX_H
+#define MAILBOX_H
+
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+
+typedef u32 mbox_msg_t;
+typedef void (mbox_receiver_t)(mbox_msg_t msg);
+struct omap_mbox;
+
+typedef int __bitwise omap_mbox_irq_t;
+#define IRQ_TX ((__force omap_mbox_irq_t) 1)
+#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+
+typedef int __bitwise omap_mbox_type_t;
+#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
+#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
+
+struct omap_mbox_ops {
+	omap_mbox_type_t	type;
+	int		(*startup)(struct omap_mbox *mbox);
+	void		(*shutdown)(struct omap_mbox *mbox);
+	/* fifo */
+	mbox_msg_t	(*fifo_read)(struct omap_mbox *mbox);
+	void		(*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
+	int		(*fifo_empty)(struct omap_mbox *mbox);
+	int		(*fifo_full)(struct omap_mbox *mbox);
+	/* irq */
+	void		(*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+};
+
+struct omap_mbox_queue {
+	spinlock_t		lock;
+	struct request_queue	*queue;
+	struct work_struct	work;
+	int	(*callback)(void *);
+	struct omap_mbox	*mbox;
+};
+
+struct omap_mbox {
+	char			*name;
+	unsigned int		irq;
+
+	struct omap_mbox_queue	*txq, *rxq;
+
+	struct omap_mbox_ops	*ops;
+
+	mbox_msg_t		seq_snd, seq_rcv;
+
+	struct device		dev;
+
+	struct omap_mbox	*next;
+	void			*priv;
+
+	void			(*err_notify)(void);
+};
+
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *);
+void omap_mbox_init_seq(struct omap_mbox *);
+
+struct omap_mbox *omap_mbox_get(const char *);
+void omap_mbox_put(struct omap_mbox *);
+
+int omap_mbox_register(struct omap_mbox *);
+int omap_mbox_unregister(struct omap_mbox *);
+
+#endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
new file mode 100644
index 00000000000..8fdb95e26fc
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -0,0 +1,382 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
+#include <mach/clock.h>
+
+#define OMAP730_MCBSP1_BASE	0xfffb1000
+#define OMAP730_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
+#define OMAP24XX_MCBSP1_BASE	0x48074000
+#define OMAP24XX_MCBSP2_BASE	0x48076000
+
+#define OMAP34XX_MCBSP1_BASE	0x48074000
+#define OMAP34XX_MCBSP2_BASE	0x49022000
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x02
+#define OMAP_MCBSP_REG_DXR2	0x04
+#define OMAP_MCBSP_REG_DXR1	0x06
+#define OMAP_MCBSP_REG_SPCR2	0x08
+#define OMAP_MCBSP_REG_SPCR1	0x0a
+#define OMAP_MCBSP_REG_RCR2	0x0c
+#define OMAP_MCBSP_REG_RCR1	0x0e
+#define OMAP_MCBSP_REG_XCR2	0x10
+#define OMAP_MCBSP_REG_XCR1	0x12
+#define OMAP_MCBSP_REG_SRGR2	0x14
+#define OMAP_MCBSP_REG_SRGR1	0x16
+#define OMAP_MCBSP_REG_MCR2	0x18
+#define OMAP_MCBSP_REG_MCR1	0x1a
+#define OMAP_MCBSP_REG_RCERA	0x1c
+#define OMAP_MCBSP_REG_RCERB	0x1e
+#define OMAP_MCBSP_REG_XCERA	0x20
+#define OMAP_MCBSP_REG_XCERB	0x22
+#define OMAP_MCBSP_REG_PCR0	0x24
+#define OMAP_MCBSP_REG_RCERC	0x26
+#define OMAP_MCBSP_REG_RCERD	0x28
+#define OMAP_MCBSP_REG_XCERC	0x2A
+#define OMAP_MCBSP_REG_XCERD	0x2C
+#define OMAP_MCBSP_REG_RCERE	0x2E
+#define OMAP_MCBSP_REG_RCERF	0x30
+#define OMAP_MCBSP_REG_XCERE	0x32
+#define OMAP_MCBSP_REG_XCERF	0x34
+#define OMAP_MCBSP_REG_RCERG	0x36
+#define OMAP_MCBSP_REG_RCERH	0x38
+#define OMAP_MCBSP_REG_XCERG	0x3A
+#define OMAP_MCBSP_REG_XCERH	0x3C
+
+#define OMAP_MAX_MCBSP_COUNT	3
+#define MAX_MCBSP_CLOCKS	3
+
+#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP		OMAP_MCBSP1
+#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
+#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x04
+#define OMAP_MCBSP_REG_DXR2	0x08
+#define OMAP_MCBSP_REG_DXR1	0x0C
+#define OMAP_MCBSP_REG_SPCR2	0x10
+#define OMAP_MCBSP_REG_SPCR1	0x14
+#define OMAP_MCBSP_REG_RCR2	0x18
+#define OMAP_MCBSP_REG_RCR1	0x1C
+#define OMAP_MCBSP_REG_XCR2	0x20
+#define OMAP_MCBSP_REG_XCR1	0x24
+#define OMAP_MCBSP_REG_SRGR2	0x28
+#define OMAP_MCBSP_REG_SRGR1	0x2C
+#define OMAP_MCBSP_REG_MCR2	0x30
+#define OMAP_MCBSP_REG_MCR1	0x34
+#define OMAP_MCBSP_REG_RCERA	0x38
+#define OMAP_MCBSP_REG_RCERB	0x3C
+#define OMAP_MCBSP_REG_XCERA	0x40
+#define OMAP_MCBSP_REG_XCERB	0x44
+#define OMAP_MCBSP_REG_PCR0	0x48
+#define OMAP_MCBSP_REG_RCERC	0x4C
+#define OMAP_MCBSP_REG_RCERD	0x50
+#define OMAP_MCBSP_REG_XCERC	0x54
+#define OMAP_MCBSP_REG_XCERD	0x58
+#define OMAP_MCBSP_REG_RCERE	0x5C
+#define OMAP_MCBSP_REG_RCERF	0x60
+#define OMAP_MCBSP_REG_XCERE	0x64
+#define OMAP_MCBSP_REG_XCERF	0x68
+#define OMAP_MCBSP_REG_RCERG	0x6C
+#define OMAP_MCBSP_REG_RCERH	0x70
+#define OMAP_MCBSP_REG_XCERG	0x74
+#define OMAP_MCBSP_REG_XCERH	0x78
+
+#define OMAP_MAX_MCBSP_COUNT	2
+#define MAX_MCBSP_CLOCKS	2
+
+#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP		OMAP_MCBSP2
+#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
+#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
+
+#endif
+
+#define OMAP_MCBSP_READ(base, reg)		__raw_readw((base) + OMAP_MCBSP_REG_##reg)
+#define OMAP_MCBSP_WRITE(base, reg, val)	__raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
+
+
+/************************** McBSP SPCR1 bit definitions ***********************/
+#define RRST			0x0001
+#define RRDY			0x0002
+#define RFULL			0x0004
+#define RSYNC_ERR		0x0008
+#define RINTM(value)		((value)<<4)	/* bits 4:5 */
+#define ABIS			0x0040
+#define DXENA			0x0080
+#define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
+#define RJUST(value)		((value)<<13)	/* bits 13:14 */
+#define DLB			0x8000
+
+/************************** McBSP SPCR2 bit definitions ***********************/
+#define XRST		0x0001
+#define XRDY		0x0002
+#define XEMPTY		0x0004
+#define XSYNC_ERR	0x0008
+#define XINTM(value)	((value)<<4)		/* bits 4:5 */
+#define GRST		0x0040
+#define FRST		0x0080
+#define SOFT		0x0100
+#define FREE		0x0200
+
+/************************** McBSP PCR bit definitions *************************/
+#define CLKRP		0x0001
+#define CLKXP		0x0002
+#define FSRP		0x0004
+#define FSXP		0x0008
+#define DR_STAT		0x0010
+#define DX_STAT		0x0020
+#define CLKS_STAT	0x0040
+#define SCLKME		0x0080
+#define CLKRM		0x0100
+#define CLKXM		0x0200
+#define FSRM		0x0400
+#define FSXM		0x0800
+#define RIOEN		0x1000
+#define XIOEN		0x2000
+#define IDLE_EN		0x4000
+
+/************************** McBSP RCR1 bit definitions ************************/
+#define RWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/************************** McBSP XCR1 bit definitions ************************/
+#define XWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/*************************** McBSP RCR2 bit definitions ***********************/
+#define RDATDLY(value)		(value)		/* Bits 0:1 */
+#define RFIG			0x0004
+#define RCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define RWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define RPHASE			0x8000
+
+/*************************** McBSP XCR2 bit definitions ***********************/
+#define XDATDLY(value)		(value)		/* Bits 0:1 */
+#define XFIG			0x0004
+#define XCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define XWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define XPHASE			0x8000
+
+/************************* McBSP SRGR1 bit definitions ************************/
+#define CLKGDV(value)		(value)		/* Bits 0:7 */
+#define FWID(value)		((value)<<8)	/* Bits 8:15 */
+
+/************************* McBSP SRGR2 bit definitions ************************/
+#define FPER(value)		(value)		/* Bits 0:11 */
+#define FSGM			0x1000
+#define CLKSM			0x2000
+#define CLKSP			0x4000
+#define GSYNC			0x8000
+
+/************************* McBSP MCR1 bit definitions *************************/
+#define RMCM			0x0001
+#define RCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define RPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define RPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+/************************* McBSP MCR2 bit definitions *************************/
+#define XMCM(value)		(value)		/* Bits 0:1 */
+#define XCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+
+/* we don't do multichannel for now */
+struct omap_mcbsp_reg_cfg {
+	u16 spcr2;
+	u16 spcr1;
+	u16 rcr2;
+	u16 rcr1;
+	u16 xcr2;
+	u16 xcr1;
+	u16 srgr2;
+	u16 srgr1;
+	u16 mcr2;
+	u16 mcr1;
+	u16 pcr0;
+	u16 rcerc;
+	u16 rcerd;
+	u16 xcerc;
+	u16 xcerd;
+	u16 rcere;
+	u16 rcerf;
+	u16 xcere;
+	u16 xcerf;
+	u16 rcerg;
+	u16 rcerh;
+	u16 xcerg;
+	u16 xcerh;
+};
+
+typedef enum {
+	OMAP_MCBSP1 = 0,
+	OMAP_MCBSP2,
+	OMAP_MCBSP3,
+} omap_mcbsp_id;
+
+typedef int __bitwise omap_mcbsp_io_type_t;
+#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
+#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
+
+typedef enum {
+	OMAP_MCBSP_WORD_8 = 0,
+	OMAP_MCBSP_WORD_12,
+	OMAP_MCBSP_WORD_16,
+	OMAP_MCBSP_WORD_20,
+	OMAP_MCBSP_WORD_24,
+	OMAP_MCBSP_WORD_32,
+} omap_mcbsp_word_length;
+
+typedef enum {
+	OMAP_MCBSP_CLK_RISING = 0,
+	OMAP_MCBSP_CLK_FALLING,
+} omap_mcbsp_clk_polarity;
+
+typedef enum {
+	OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
+	OMAP_MCBSP_FS_ACTIVE_LOW,
+} omap_mcbsp_fs_polarity;
+
+typedef enum {
+	OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
+	OMAP_MCBSP_CLK_STP_MODE_DELAY,
+} omap_mcbsp_clk_stp_mode;
+
+
+/******* SPI specific mode **********/
+typedef enum {
+	OMAP_MCBSP_SPI_MASTER = 0,
+	OMAP_MCBSP_SPI_SLAVE,
+} omap_mcbsp_spi_mode;
+
+struct omap_mcbsp_spi_cfg {
+	omap_mcbsp_spi_mode		spi_mode;
+	omap_mcbsp_clk_polarity		rx_clock_polarity;
+	omap_mcbsp_clk_polarity		tx_clock_polarity;
+	omap_mcbsp_fs_polarity		fsx_polarity;
+	u8				clk_div;
+	omap_mcbsp_clk_stp_mode		clk_stp_mode;
+	omap_mcbsp_word_length		word_length;
+};
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+	void (*request)(unsigned int);
+	void (*free)(unsigned int);
+	int (*check)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+	unsigned long phys_base;
+	u32 virt_base;
+	u8 dma_rx_sync, dma_tx_sync;
+	u16 rx_irq, tx_irq;
+	struct omap_mcbsp_ops *ops;
+	char const *clk_name;
+};
+
+struct omap_mcbsp {
+	struct device *dev;
+	unsigned long phys_base;
+	u32 io_base;
+	u8 id;
+	u8 free;
+	omap_mcbsp_word_length rx_word_length;
+	omap_mcbsp_word_length tx_word_length;
+
+	omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+	/* IRQ based TX/RX */
+	int rx_irq;
+	int tx_irq;
+
+	/* DMA stuff */
+	u8 dma_rx_sync;
+	short dma_rx_lch;
+	u8 dma_tx_sync;
+	short dma_tx_lch;
+
+	/* Completion queues */
+	struct completion tx_irq_completion;
+	struct completion rx_irq_completion;
+	struct completion tx_dma_completion;
+	struct completion rx_dma_completion;
+
+	/* Protect the field .free, while checking if the mcbsp is in use */
+	spinlock_t lock;
+	struct omap_mcbsp_platform_data *pdata;
+	struct clk *clk;
+};
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+					int size);
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+int omap_mcbsp_request(unsigned int id);
+void omap_mcbsp_free(unsigned int id);
+void omap_mcbsp_start(unsigned int id);
+void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_xmit_word(unsigned int id, u32 word);
+u32 omap_mcbsp_recv_word(unsigned int id);
+
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
+
+
+/* SPI specific API */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
+
+/* Polled read/write functions */
+int omap_mcbsp_pollread(unsigned int id, u16 * buf);
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h
new file mode 100644
index 00000000000..1254e4945b6
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mcspi.h
@@ -0,0 +1,15 @@
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+struct omap2_mcspi_platform_config {
+	unsigned short	num_cs;
+};
+
+struct omap2_mcspi_device_config {
+	unsigned turbo_mode:1;
+
+	/* Do we want one channel enabled at the same time? */
+	unsigned single_channel:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
new file mode 100644
index 00000000000..a325caf80d0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -0,0 +1,104 @@
+/*
+ * arch/arm/plat-omap/include/mach/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#define PHYS_OFFSET		UL(0x10000000)
+#elif defined(CONFIG_ARCH_OMAP2)
+#define PHYS_OFFSET		UL(0x80000000)
+#endif
+
+/*
+ * Conversion between SDRAM and fake PCI bus, used by USB
+ * NOTE: Physical address must be converted to Local Bus address
+ *	 on OMAP-1510 only
+ */
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	UL(0x30000000)
+
+#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+
+#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
+					(dma_addr_t)virt_to_lbus(page_address(page)) : \
+					(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
+						lbus_to_virt(addr) : \
+						__bus_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
+					   (dma_addr_t) (is_lbus_device(dev) ? \
+						virt_to_lbus(__addr) : \
+						__virt_to_bus(__addr)); })
+
+#endif	/* CONFIG_ARCH_OMAP15XX */
+
+/* Override the ARM default */
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+
+#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
+#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
+#endif
+
+#define CONSISTENT_DMA_SIZE \
+	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
+
+#endif
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h
new file mode 100644
index 00000000000..3122bf68c7c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/menelaus.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/plat-omap/include/mach/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+struct device;
+
+struct menelaus_platform_data {
+	int (* late_init)(struct device *dev);
+};
+
+extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+					  void *data);
+extern void menelaus_unregister_mmc_callback(void);
+extern int menelaus_set_mmc_opendrain(int slot, int enable);
+extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
+
+extern int menelaus_set_vmem(unsigned int mV);
+extern int menelaus_set_vio(unsigned int mV);
+extern int menelaus_set_vmmc(unsigned int mV);
+extern int menelaus_set_vaux(unsigned int mV);
+extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
+extern int menelaus_set_slot_sel(int enable);
+extern int menelaus_get_slot_pin_states(void);
+extern int menelaus_set_vcore_sw(unsigned int mV);
+extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
+
+#define EN_VPLL_SLEEP	(1 << 7)
+#define EN_VMMC_SLEEP	(1 << 6)
+#define EN_VAUX_SLEEP	(1 << 5)
+#define EN_VIO_SLEEP	(1 << 4)
+#define EN_VMEM_SLEEP	(1 << 3)
+#define EN_DC3_SLEEP	(1 << 2)
+#define EN_DC2_SLEEP	(1 << 1)
+#define EN_VC_SLEEP	(1 << 0)
+
+extern int menelaus_set_regulator_sleep(int enable, u32 val);
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus()	1
+#else
+#define omap_has_menelaus()	0
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
new file mode 100644
index 00000000000..fc15d13058f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -0,0 +1,74 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/board.h>
+
+#define OMAP_MMC_MAX_SLOTS	2
+
+struct omap_mmc_platform_data {
+	struct omap_mmc_conf	conf;
+
+	/* number of slots on board */
+	unsigned nr_slots:2;
+
+	/* set if your board has components or wiring that limits the
+	 * maximum frequency on the MMC bus */
+	unsigned int max_freq;
+
+	/* switch the bus to a new slot */
+	int (* switch_slot)(struct device *dev, int slot);
+	/* initialize board-specific MMC functionality, can be NULL if
+	 * not supported */
+	int (* init)(struct device *dev);
+	void (* cleanup)(struct device *dev);
+	void (* shutdown)(struct device *dev);
+
+	/* To handle board related suspend/resume functionality for MMC */
+	int (*suspend)(struct device *dev, int slot);
+	int (*resume)(struct device *dev, int slot);
+
+	struct omap_mmc_slot_data {
+		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
+		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
+		int (* get_ro)(struct device *dev, int slot);
+
+		/* return MMC cover switch state, can be NULL if not supported.
+		 *
+		 * possible return values:
+		 *   0 - open
+		 *   1 - closed
+		 */
+		int (* get_cover_state)(struct device *dev, int slot);
+
+		const char *name;
+		u32 ocr_mask;
+
+		/* Card detection IRQs */
+		int card_detect_irq;
+		int (* card_detect)(int irq);
+
+		unsigned int ban_openended:1;
+
+	} slots[OMAP_MMC_MAX_SLOTS];
+};
+
+extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
new file mode 100644
index 00000000000..5cee7e16a1b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -0,0 +1,61 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ *
+ * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#define OMAP_MPU_TIMER_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET	0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n)					\
+((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+	(n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+	return timer->read_tim;
+}
+
+#define xip_irqpending()	\
+	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approxmation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
+#else
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
new file mode 100644
index 00000000000..614b2c1327c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -0,0 +1,615 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
+					.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_730(mux_reg, mode_offset, mode)		\
+	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode,			\
+				pull_en, pull_mode, dbg)	\
+{								\
+	.name		= desc,					\
+	.debug		= dbg,					\
+	.mux_reg	= reg_offset,				\
+	.mask		= mode,					\
+	.pull_val	= pull_en,				\
+	.pu_pd_val	= pull_mode,				\
+},
+
+
+#define PULL_DISABLED	0
+#define PULL_ENABLED	1
+
+#define PULL_DOWN	0
+#define PULL_UP		1
+
+struct pin_config {
+	char *name;
+	unsigned char busy;
+	unsigned char debug;
+
+	const char *mux_reg_name;
+	const unsigned int mux_reg;
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+};
+
+enum omap730_index {
+	/* OMAP 730 keyboard */
+	E2_730_KBR0,
+	J7_730_KBR1,
+	E1_730_KBR2,
+	F3_730_KBR3,
+	D2_730_KBR4,
+	C2_730_KBC0,
+	D3_730_KBC1,
+	E4_730_KBC2,
+	F4_730_KBC3,
+	E3_730_KBC4,
+
+	/* USB */
+	AA17_730_USB_DM,
+	W16_730_USB_PU_EN,
+	W17_730_USB_VBUSI,
+};
+
+enum omap1xxx_index {
+	/* UART1 (BT_UART_GATING)*/
+	UART1_TX = 0,
+	UART1_RTS,
+
+	/* UART2 (COM_UART_GATING)*/
+	UART2_TX,
+	UART2_RX,
+	UART2_CTS,
+	UART2_RTS,
+
+	/* UART3 (GIGA_UART_GATING) */
+	UART3_TX,
+	UART3_RX,
+	UART3_CTS,
+	UART3_RTS,
+	UART3_CLKREQ,
+	UART3_BCLK,	/* 12MHz clock out */
+	Y15_1610_UART3_RTS,
+
+	/* PWT & PWL */
+	PWT,
+	PWL,
+
+	/* USB master generic */
+	R18_USB_VBUS,
+	R18_1510_USB_GPIO0,
+	W4_USB_PUEN,
+	W4_USB_CLKO,
+	W4_USB_HIGHZ,
+	W4_GPIO58,
+
+	/* USB1 master */
+	USB1_SUSP,
+	USB1_SEO,
+	W13_1610_USB1_SE0,
+	USB1_TXEN,
+	USB1_TXD,
+	USB1_VP,
+	USB1_VM,
+	USB1_RCV,
+	USB1_SPEED,
+	R13_1610_USB1_SPEED,
+	R13_1710_USB1_SE0,
+
+	/* USB2 master */
+	USB2_SUSP,
+	USB2_VP,
+	USB2_TXEN,
+	USB2_VM,
+	USB2_RCV,
+	USB2_SEO,
+	USB2_TXD,
+
+	/* OMAP-1510 GPIO */
+	R18_1510_GPIO0,
+	R19_1510_GPIO1,
+	M14_1510_GPIO2,
+
+	/* OMAP1610 GPIO */
+	P18_1610_GPIO3,
+	Y15_1610_GPIO17,
+
+	/* OMAP-1710 GPIO */
+	R18_1710_GPIO0,
+	V2_1710_GPIO10,
+	N21_1710_GPIO14,
+	W15_1710_GPIO40,
+
+	/* MPUIO */
+	MPUIO2,
+	N15_1610_MPUIO2,
+	MPUIO4,
+	MPUIO5,
+	T20_1610_MPUIO5,
+	W11_1610_MPUIO6,
+	V10_1610_MPUIO7,
+	W11_1610_MPUIO9,
+	V10_1610_MPUIO10,
+	W10_1610_MPUIO11,
+	E20_1610_MPUIO13,
+	U20_1610_MPUIO14,
+	E19_1610_MPUIO15,
+
+	/* MCBSP2 */
+	MCBSP2_CLKR,
+	MCBSP2_CLKX,
+	MCBSP2_DR,
+	MCBSP2_DX,
+	MCBSP2_FSR,
+	MCBSP2_FSX,
+
+	/* MCBSP3 */
+	MCBSP3_CLKX,
+
+	/* Misc ballouts */
+	BALLOUT_V8_ARMIO3,
+	N20_HDQ,
+
+	/* OMAP-1610 MMC2 */
+	W8_1610_MMC2_DAT0,
+	V8_1610_MMC2_DAT1,
+	W15_1610_MMC2_DAT2,
+	R10_1610_MMC2_DAT3,
+	Y10_1610_MMC2_CLK,
+	Y8_1610_MMC2_CMD,
+	V9_1610_MMC2_CMDDIR,
+	V5_1610_MMC2_DATDIR0,
+	W19_1610_MMC2_DATDIR1,
+	R18_1610_MMC2_CLKIN,
+
+	/* OMAP-1610 External Trace Interface */
+	M19_1610_ETM_PSTAT0,
+	L15_1610_ETM_PSTAT1,
+	L18_1610_ETM_PSTAT2,
+	L19_1610_ETM_D0,
+	J19_1610_ETM_D6,
+	J18_1610_ETM_D7,
+
+	/* OMAP16XX GPIO */
+	P20_1610_GPIO4,
+	V9_1610_GPIO7,
+	W8_1610_GPIO9,
+	N20_1610_GPIO11,
+	N19_1610_GPIO13,
+	P10_1610_GPIO22,
+	V5_1610_GPIO24,
+	AA20_1610_GPIO_41,
+	W19_1610_GPIO48,
+	M7_1610_GPIO62,
+	V14_16XX_GPIO37,
+	R9_16XX_GPIO18,
+	L14_16XX_GPIO49,
+
+	/* OMAP-1610 uWire */
+	V19_1610_UWIRE_SCLK,
+	U18_1610_UWIRE_SDI,
+	W21_1610_UWIRE_SDO,
+	N14_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS3,
+	N15_1610_UWIRE_CS1,
+
+	/* OMAP-1610 SPI */
+	U19_1610_SPIF_SCK,
+	U18_1610_SPIF_DIN,
+	P20_1610_SPIF_DIN,
+	W21_1610_SPIF_DOUT,
+	R18_1610_SPIF_DOUT,
+	N14_1610_SPIF_CS0,
+	N15_1610_SPIF_CS1,
+	T19_1610_SPIF_CS2,
+	P15_1610_SPIF_CS3,
+
+	/* OMAP-1610 Flash */
+	L3_1610_FLASH_CS2B_OE,
+	M8_1610_FLASH_CS2B_WE,
+
+	/* First MMC */
+	MMC_CMD,
+	MMC_DAT1,
+	MMC_DAT2,
+	MMC_DAT0,
+	MMC_CLK,
+	MMC_DAT3,
+
+	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
+	M15_1710_MMC_CLKI,
+	P19_1710_MMC_CMDDIR,
+	P20_1710_MMC_DATDIR0,
+
+	/* OMAP-1610 USB0 alternate pin configuration */
+	W9_USB0_TXEN,
+	AA9_USB0_VP,
+	Y5_USB0_RCV,
+	R9_USB0_VM,
+	V6_USB0_TXD,
+	W5_USB0_SE0,
+	V9_USB0_SPEED,
+	V9_USB0_SUSP,
+
+	/* USB2 */
+	W9_USB2_TXEN,
+	AA9_USB2_VP,
+	Y5_USB2_RCV,
+	R9_USB2_VM,
+	V6_USB2_TXD,
+	W5_USB2_SE0,
+
+	/* 16XX UART */
+	R13_1610_UART1_TX,
+	V14_16XX_UART1_RX,
+	R14_1610_UART1_CTS,
+	AA15_1610_UART1_RTS,
+	R9_16XX_UART2_RX,
+	L14_16XX_UART3_RX,
+
+	/* I2C OMAP-1610 */
+	I2C_SCL,
+	I2C_SDA,
+
+	/* Keypad */
+	F18_1610_KBC0,
+	D20_1610_KBC1,
+	D19_1610_KBC2,
+	E18_1610_KBC3,
+	C21_1610_KBC4,
+	G18_1610_KBR0,
+	F19_1610_KBR1,
+	H14_1610_KBR2,
+	E20_1610_KBR3,
+	E19_1610_KBR4,
+	N19_1610_KBR5,
+
+	/* Power management */
+	T20_1610_LOW_PWR,
+
+	/* MCLK Settings */
+	V5_1710_MCLK_ON,
+	V5_1710_MCLK_OFF,
+	R10_1610_MCLK_ON,
+	R10_1610_MCLK_OFF,
+
+	/* CompactFlash controller */
+	P11_1610_CF_CD2,
+	R11_1610_CF_IOIS16,
+	V10_1610_CF_IREQ,
+	W10_1610_CF_RESET,
+	W11_1610_CF_CD1,
+
+	/* parallel camera */
+	J15_1610_CAM_LCLK,
+	J18_1610_CAM_D7,
+	J19_1610_CAM_D6,
+	J14_1610_CAM_D5,
+	K18_1610_CAM_D4,
+	K19_1610_CAM_D3,
+	K15_1610_CAM_D2,
+	K14_1610_CAM_D1,
+	L19_1610_CAM_D0,
+	L18_1610_CAM_VS,
+	L15_1610_CAM_HS,
+	M19_1610_CAM_RSTZ,
+	Y15_1610_CAM_OUTCLK,
+
+	/* serial camera */
+	H19_1610_CAM_EXCLK,
+	Y12_1610_CCP_CLKP,
+	W13_1610_CCP_CLKM,
+	W14_1610_CCP_DATAP,
+	Y14_1610_CCP_DATAM,
+
+};
+
+enum omap24xx_index {
+	/* 24xx I2C */
+	M19_24XX_I2C1_SCL,
+	L15_24XX_I2C1_SDA,
+	J15_24XX_I2C2_SCL,
+	H19_24XX_I2C2_SDA,
+
+	/* 24xx Menelaus interrupt */
+	W19_24XX_SYS_NIRQ,
+
+	/* 24xx clock */
+	W14_24XX_SYS_CLKOUT,
+
+	/* 24xx GPMC chipselects, wait pin monitoring */
+	E2_GPMC_NCS2,
+	L2_GPMC_NCS7,
+	L3_GPMC_WAIT0,
+	N7_GPMC_WAIT1,
+	M1_GPMC_WAIT2,
+	P1_GPMC_WAIT3,
+
+	/* 242X McBSP */
+	Y15_24XX_MCBSP2_CLKX,
+	R14_24XX_MCBSP2_FSX,
+	W15_24XX_MCBSP2_DR,
+	V15_24XX_MCBSP2_DX,
+
+	/* 24xx GPIO */
+	M21_242X_GPIO11,
+	P21_242X_GPIO12,
+	AA10_242X_GPIO13,
+	AA6_242X_GPIO14,
+	AA4_242X_GPIO15,
+	Y11_242X_GPIO16,
+	AA12_242X_GPIO17,
+	AA8_242X_GPIO58,
+	Y20_24XX_GPIO60,
+	W4__24XX_GPIO74,
+	N15_24XX_GPIO85,
+	M15_24XX_GPIO92,
+	P20_24XX_GPIO93,
+	P18_24XX_GPIO95,
+	M18_24XX_GPIO96,
+	L14_24XX_GPIO97,
+	J15_24XX_GPIO99,
+	V14_24XX_GPIO117,
+	P14_24XX_GPIO125,
+
+	/* 242x DBG GPIO */
+	V4_242X_GPIO49,
+	W2_242X_GPIO50,
+	U4_242X_GPIO51,
+	V3_242X_GPIO52,
+	V2_242X_GPIO53,
+	V6_242X_GPIO53,
+	T4_242X_GPIO54,
+	Y4_242X_GPIO54,
+	T3_242X_GPIO55,
+	U2_242X_GPIO56,
+
+	/* 24xx external DMA requests */
+	AA10_242X_DMAREQ0,
+	AA6_242X_DMAREQ1,
+	E4_242X_DMAREQ2,
+	G4_242X_DMAREQ3,
+	D3_242X_DMAREQ4,
+	E3_242X_DMAREQ5,
+
+	/* UART3 */
+	K15_24XX_UART3_TX,
+	K14_24XX_UART3_RX,
+
+	/* MMC/SDIO */
+	G19_24XX_MMC_CLKO,
+	H18_24XX_MMC_CMD,
+	F20_24XX_MMC_DAT0,
+	H14_24XX_MMC_DAT1,
+	E19_24XX_MMC_DAT2,
+	D19_24XX_MMC_DAT3,
+	F19_24XX_MMC_DAT_DIR0,
+	E20_24XX_MMC_DAT_DIR1,
+	F18_24XX_MMC_DAT_DIR2,
+	E18_24XX_MMC_DAT_DIR3,
+	G18_24XX_MMC_CMD_DIR,
+	H15_24XX_MMC_CLKI,
+
+	/* Full speed USB */
+	J20_24XX_USB0_PUEN,
+	J19_24XX_USB0_VP,
+	K20_24XX_USB0_VM,
+	J18_24XX_USB0_RCV,
+	K19_24XX_USB0_TXEN,
+	J14_24XX_USB0_SE0,
+	K18_24XX_USB0_DAT,
+
+	N14_24XX_USB1_SE0,
+	W12_24XX_USB1_SE0,
+	P15_24XX_USB1_DAT,
+	R13_24XX_USB1_DAT,
+	W20_24XX_USB1_TXEN,
+	P13_24XX_USB1_TXEN,
+	V19_24XX_USB1_RCV,
+	V12_24XX_USB1_RCV,
+
+	AA10_24XX_USB2_SE0,
+	Y11_24XX_USB2_DAT,
+	AA12_24XX_USB2_TXEN,
+	AA6_24XX_USB2_RCV,
+	AA4_24XX_USB2_TLLSE0,
+
+	/* Keypad GPIO*/
+	T19_24XX_KBR0,
+	R19_24XX_KBR1,
+	V18_24XX_KBR2,
+	M21_24XX_KBR3,
+	E5__24XX_KBR4,
+	M18_24XX_KBR5,
+	R20_24XX_KBC0,
+	M14_24XX_KBC1,
+	H19_24XX_KBC2,
+	V17_24XX_KBC3,
+	P21_24XX_KBC4,
+	L14_24XX_KBC5,
+	N19_24XX_KBC6,
+
+	/* 24xx Menelaus Keypad GPIO */
+	B3__24XX_KBR5,
+	AA4_24XX_KBC2,
+	B13_24XX_KBC6,
+
+	/* 2430 USB */
+	AD9_2430_USB0_PUEN,
+	Y11_2430_USB0_VP,
+	AD7_2430_USB0_VM,
+	AE7_2430_USB0_RCV,
+	AD4_2430_USB0_TXEN,
+	AF9_2430_USB0_SE0,
+	AE6_2430_USB0_DAT,
+	AD24_2430_USB1_SE0,
+	AB24_2430_USB1_RCV,
+	Y25_2430_USB1_TXEN,
+	AA26_2430_USB1_DAT,
+
+	/* 2430 HS-USB */
+	AD9_2430_USB0HS_DATA3,
+	Y11_2430_USB0HS_DATA4,
+	AD7_2430_USB0HS_DATA5,
+	AE7_2430_USB0HS_DATA6,
+	AD4_2430_USB0HS_DATA2,
+	AF9_2430_USB0HS_DATA0,
+	AE6_2430_USB0HS_DATA1,
+	AE8_2430_USB0HS_CLK,
+	AD8_2430_USB0HS_DIR,
+	AE5_2430_USB0HS_STP,
+	AE9_2430_USB0HS_NXT,
+	AC7_2430_USB0HS_DATA7,
+
+	/* 2430 McBSP */
+	AC10_2430_MCBSP2_FSX,
+	AD16_2430_MCBSP2_CLX,
+	AE13_2430_MCBSP2_DX,
+	AD13_2430_MCBSP2_DR,
+	AC10_2430_MCBSP2_FSX_OFF,
+	AD16_2430_MCBSP2_CLX_OFF,
+	AE13_2430_MCBSP2_DX_OFF,
+	AD13_2430_MCBSP2_DR_OFF,
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/mach/nand.h
new file mode 100644
index 00000000000..631a7bed1ee
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/nand.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_nand_platform_data {
+	unsigned int		options;
+	int			cs;
+	int			gpio_irq;
+	struct mtd_partition	*parts;
+	int			nr_parts;
+	int			(*nand_setup)(void __iomem *);
+	int			(*dev_ready)(struct omap_nand_platform_data *);
+	int			dma_channel;
+	void __iomem		*gpmc_cs_baseaddr;
+	void __iomem		*gpmc_baseaddr;
+};
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h
new file mode 100644
index 00000000000..bdf30a0f87f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-alsa.h
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
+ *
+ * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
+ *
+ * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
+ *
+ * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
+ * Written by Daniel Petrini, David Cohen, Anderson Briglia
+ *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History
+ *  -------
+ *
+ *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
+ *  					original version based in sa1100 driver
+ *  					and omap oss driver.
+ */
+
+#ifndef __OMAP_ALSA_H
+#define __OMAP_ALSA_H
+
+#include <mach/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <mach/mcbsp.h>
+#include <linux/platform_device.h>
+
+#define DMA_BUF_SIZE	(1024 * 8)
+
+/*
+ * Buffer management for alsa and dma
+ */
+struct audio_stream {
+	char *id;		/* identification string */
+	int stream_id;		/* numeric identification */
+	int dma_dev;		/* dma number of that device */
+	int *lch;		/* Chain of channels this stream is linked to */
+	char started;		/* to store if the chain was started or not */
+	int dma_q_head;		/* DMA Channel Q Head */
+	int dma_q_tail;		/* DMA Channel Q Tail */
+	char dma_q_count;	/* DMA Channel Q Count */
+	int active:1;		/* we are using this stream for transfer now */
+	int period;		/* current transfer period */
+	int periods;		/* current count of periods registerd in the DMA engine */
+	spinlock_t dma_lock;	/* for locking in DMA operations */
+	struct snd_pcm_substream *stream;	/* the pcm stream */
+	unsigned linked:1;	/* dma channels linked */
+	int offset;		/* store start position of the last period in the alsa buffer */
+	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
+	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
+};
+
+/*
+ * Alsa card structure for aic23
+ */
+struct snd_card_omap_codec {
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	long samplerate;
+	struct audio_stream s[2];	/* playback & capture */
+};
+
+/* Codec specific information and function pointers.
+ * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
+ * are responsible for defining the function pointers.
+ */
+struct omap_alsa_codec_config {
+	char 	*name;
+	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
+	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
+	struct	snd_pcm_hardware *snd_omap_alsa_playback;
+	struct	snd_pcm_hardware *snd_omap_alsa_capture;
+	void	(*codec_configure_dev)(void);
+	void	(*codec_set_samplerate)(long);
+	void	(*codec_clock_setup)(void);
+	int	(*codec_clock_on)(void);
+	int 	(*codec_clock_off)(void);
+	int	(*get_default_samplerate)(void);
+};
+
+/*********** Mixer function prototypes *************************/
+int snd_omap_mixer(struct snd_card_omap_codec *);
+void snd_omap_init_mixer(void);
+
+#ifdef CONFIG_PM
+void snd_omap_suspend_mixer(void);
+void snd_omap_resume_mixer(void);
+#endif
+
+int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
+int snd_omap_alsa_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
+int snd_omap_alsa_resume(struct platform_device *pdev);
+#else
+#define snd_omap_alsa_suspend	NULL
+#define snd_omap_alsa_resume	NULL
+#endif
+
+void callback_omap_alsa_sound_dma(void *);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
new file mode 100644
index 00000000000..505a38af8b2
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -0,0 +1,48 @@
+/* arch/arm/plat-omap/include/mach/omap1510.h
+ *
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE	0xE0000000
+#define OMAP1510_DSP_SIZE	0x28000
+#define OMAP1510_DSP_START	0xE0000000
+
+#define OMAP1510_DSPREG_BASE	0xE1000000
+#define OMAP1510_DSPREG_SIZE	SZ_128K
+#define OMAP1510_DSPREG_START	0xE1000000
+
+#endif /*  __ASM_ARCH_OMAP15XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
new file mode 100644
index 00000000000..c6c93afb278
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -0,0 +1,197 @@
+/* arch/arm/plat-omap/include/mach/omap16xx.h
+ *
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE	0xE0000000
+#define OMAP16XX_DSP_SIZE	0x28000
+#define OMAP16XX_DSP_START	0xE0000000
+
+#define OMAP16XX_DSPREG_BASE	0xE1000000
+#define OMAP16XX_DSPREG_SIZE	SZ_128K
+#define OMAP16XX_DSPREG_START	0xE1000000
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
+
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE		 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Maping through MPU bus */
+#define UART3_RHR               (OMAP_UART3_BASE + 0)
+#define UART3_THR               (OMAP_UART3_BASE + 0)
+#define UART3_DLL               (OMAP_UART3_BASE + 0)
+#define UART3_IER               (OMAP_UART3_BASE + 4)
+#define UART3_DLH               (OMAP_UART3_BASE + 4)
+#define UART3_IIR               (OMAP_UART3_BASE + 8)
+#define UART3_FCR               (OMAP_UART3_BASE + 8)
+#define UART3_EFR               (OMAP_UART3_BASE + 8)
+#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
+/* Mailbox */
+#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
new file mode 100644
index 00000000000..bb8319d66e9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -0,0 +1,107 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP24XX_H
+#define __ASM_ARCH_OMAP24XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE		0x48000000
+#define L4_WK_243X_BASE		0x49000000
+#define L3_24XX_BASE		0x68000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
+#define OMAP24XX_IVA_INTC_BASE	0x40000000
+#define IRQ_SIR_IRQ		0x0040
+
+#define OMAP2420_CTRL_BASE	L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE	0x68008000
+
+#define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE	(L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE	OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE	0x6C000000
+#define OMAP243X_SDRC_BASE	0x6D000000
+#define OMAP243X_GPMC_BASE	0x6E000000
+#define OMAP243X_SCM_BASE	(L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE	OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE	(L4_24XX_BASE + 0x000ac000)
+
+/* DSP SS */
+#define OMAP2420_DSP_BASE	0x58000000
+#define OMAP2420_DSP_MEM_BASE	(OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE	(OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE	(OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE	0x5C000000
+#define OMAP243X_DSP_MEM_BASE	(OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE	(OMAP243X_DSP_BASE + 0x1000000)
+
+/* Mailbox */
+#define OMAP24XX_MAILBOX_BASE	(L4_24XX_BASE + 0x94000)
+
+/* Camera */
+#define OMAP24XX_CAMERA_BASE	(L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE	(L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE	(OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE	(OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
+#define OMAP2_CM_BASE		OMAP2420_CM_BASE
+#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
+#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#elif defined(CONFIG_ARCH_OMAP2430)
+
+#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
+#define OMAP2_CM_BASE		OMAP2430_CM_BASE
+#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
+#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#endif
+
+#endif /* __ASM_ARCH_OMAP24XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
new file mode 100644
index 00000000000..8e0479fff05
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_OMAP34XX_H
+#define __ASM_ARCH_OMAP34XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE		0x48000000
+#define L4_WK_34XX_BASE		0x48300000
+#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
+#define L4_PER_34XX_BASE	0x49000000
+#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
+#define L4_EMU_34XX_BASE	0x54000000
+#define L4_EMU_BASE		L4_EMU_34XX_BASE
+#define L3_34XX_BASE		0x68000000
+#define L3_OMAP_BASE		L3_34XX_BASE
+
+#define OMAP3430_32KSYNCT_BASE	0x48320000
+#define OMAP3430_CM_BASE	0x48004800
+#define OMAP3430_PRM_BASE	0x48306800
+#define OMAP343X_SMS_BASE	0x6C000000
+#define OMAP343X_SDRC_BASE	0x6D000000
+#define OMAP34XX_GPMC_BASE	0x6E000000
+#define OMAP343X_SCM_BASE	0x48002000
+#define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE	0x48200000
+#define OMAP34XX_IVA_INTC_BASE	0x40000000
+#define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
+#define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
+
+
+#if defined(CONFIG_ARCH_OMAP3430)
+
+#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
+#define OMAP2_CM_BASE			OMAP3430_CM_BASE
+#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+
+#endif
+
+#define OMAP34XX_DSP_BASE	0x58000000
+#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
+#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
+#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
+#endif /* __ASM_ARCH_OMAP34XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h
new file mode 100644
index 00000000000..14272bc1a6f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap730.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap730.h
+ *
+ * Hardware definitions for TI OMAP730 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP730_H
+#define __ASM_ARCH_OMAP730_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP730_DSP_BASE	0xE0000000
+#define OMAP730_DSP_SIZE	0x50000
+#define OMAP730_DSP_START	0xE0000000
+
+#define OMAP730_DSPREG_BASE	0xE1000000
+#define OMAP730_DSPREG_SIZE	SZ_128K
+#define OMAP730_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_CONFIG_BASE	0xfffe1000
+#define OMAP730_IO_CONF_0	0xfffe1070
+#define OMAP730_IO_CONF_1	0xfffe1074
+#define OMAP730_IO_CONF_2	0xfffe1078
+#define OMAP730_IO_CONF_3	0xfffe107c
+#define OMAP730_IO_CONF_4	0xfffe1080
+#define OMAP730_IO_CONF_5	0xfffe1084
+#define OMAP730_IO_CONF_6	0xfffe1088
+#define OMAP730_IO_CONF_7	0xfffe108c
+#define OMAP730_IO_CONF_8	0xfffe1090
+#define OMAP730_IO_CONF_9	0xfffe1094
+#define OMAP730_IO_CONF_10	0xfffe1098
+#define OMAP730_IO_CONF_11	0xfffe109c
+#define OMAP730_IO_CONF_12	0xfffe10a0
+#define OMAP730_IO_CONF_13	0xfffe10a4
+
+#define OMAP730_MODE_1		0xfffe1010
+#define OMAP730_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP730_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_FLASH_CFG_0	0xfffecc10
+#define OMAP730_FLASH_ACFG_0	0xfffecc50
+#define OMAP730_FLASH_CFG_1	0xfffecc14
+#define OMAP730_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_ICR_BASE	0xfffbb800
+#define OMAP730_DSP_M_CTL	0xfffbb804
+#define OMAP730_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP730_PCC_UPLD_CTRL		(OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP730_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
new file mode 100644
index 00000000000..cae037d1307
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -0,0 +1,395 @@
+/*
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_EVENT_READY	1
+#define OMAPFB_EVENT_DISABLED	2
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  reserved1;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+#include <mach/board.h>
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK		0x003f
+
+#define OMAP_LCDC_PANEL_TFT		0x0100
+
+#define OMAPFB_PLANE_XRES_MIN		8
+#define OMAPFB_PLANE_YRES_MIN		8
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+	const char	*name;
+	int		config;		/* TFT/STN, signal inversion */
+	int		bpp;		/* Pixel format in fb mem */
+	int		data_lines;	/* Lines on LCD HW interface */
+
+	int		x_res, y_res;
+	int		pixel_clock;	/* In kHz */
+	int		hsw;		/* Horizontal synchronization
+					   pulse width */
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		vsw;		/* Vertical synchronization
+					   pulse width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		acb;		/* ac-bias pin frequency */
+	int		pcd;		/* pixel clock divider.
+					   Obsolete use pixel_clock instead */
+
+	int		(*init)		(struct lcd_panel *panel,
+					 struct omapfb_device *fbdev);
+	void		(*cleanup)	(struct lcd_panel *panel);
+	int		(*enable)	(struct lcd_panel *panel);
+	void		(*disable)	(struct lcd_panel *panel);
+	unsigned long	(*get_caps)	(struct lcd_panel *panel);
+	int		(*set_bklight_level)(struct lcd_panel *panel,
+					     unsigned int level);
+	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
+	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
+	int		(*run_test)	(struct lcd_panel *panel, int test_num);
+};
+
+struct extif_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];		/* set by extif->convert_timings */
+
+	int converted;
+};
+
+struct lcd_ctrl_extif {
+	int  (*init)		(struct omapfb_device *fbdev);
+	void (*cleanup)		(void);
+	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
+	unsigned long (*get_max_tx_rate)(void);
+	int  (*convert_timings)	(struct extif_timings *timings);
+	void (*set_timings)	(const struct extif_timings *timings);
+	void (*set_bits_per_cycle)(int bpc);
+	void (*write_command)	(const void *buf, unsigned int len);
+	void (*read_data)	(void *buf, unsigned int len);
+	void (*write_data)	(const void *buf, unsigned int len);
+	void (*transfer_area)	(int width, int height,
+				 void (callback)(void * data), void *data);
+	int  (*setup_tearsync)	(unsigned pin_cnt,
+				 unsigned hs_pulse_time, unsigned vs_pulse_time,
+				 int hs_pol_inv, int vs_pol_inv, int div);
+	int  (*enable_tearsync) (int enable, unsigned line);
+
+	unsigned long		max_transmit_size;
+};
+
+struct omapfb_notifier_block {
+	struct notifier_block	nb;
+	void			*data;
+	int			plane_idx;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+					  unsigned long event,
+					  void *fbi);
+
+struct omapfb_mem_region {
+	dma_addr_t	paddr;
+	void		*vaddr;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	unsigned	alloc:1;	/* allocated by the driver */
+	unsigned	map:1;		/* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+	int				region_cnt;
+	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+};
+
+struct lcd_ctrl {
+	const char	*name;
+	void		*data;
+
+	int		(*init)		  (struct omapfb_device *fbdev,
+					   int ext_mode,
+					   struct omapfb_mem_desc *req_md);
+	void		(*cleanup)	  (void);
+	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
+	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
+	int		(*set_update_mode)(enum omapfb_update_mode mode);
+	enum omapfb_update_mode (*get_update_mode)(void);
+	int		(*setup_plane)	  (int plane, int channel_out,
+					   unsigned long offset,
+					   int screen_width,
+					   int pos_x, int pos_y, int width,
+					   int height, int color_mode);
+	int		(*setup_mem)	  (int plane, size_t size,
+					   int mem_type, unsigned long *paddr);
+	int		(*mmap)		  (struct fb_info *info,
+					   struct vm_area_struct *vma);
+	int		(*set_scale)	  (int plane,
+					   int orig_width, int orig_height,
+					   int out_width, int out_height);
+	int		(*enable_plane)	  (int plane, int enable);
+	int		(*update_window)  (struct fb_info *fbi,
+					   struct omapfb_update_window *win,
+					   void (*callback)(void *),
+					   void *callback_data);
+	void		(*sync)		  (void);
+	void		(*suspend)	  (void);
+	void		(*resume)	  (void);
+	int		(*run_test)	  (int test_num);
+	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+					   u16 blue, u16 transp,
+					   int update_hw_mem);
+	int		(*set_color_key)  (struct omapfb_color_key *ck);
+	int		(*get_color_key)  (struct omapfb_color_key *ck);
+};
+
+enum omapfb_state {
+	OMAPFB_DISABLED	= 0,
+	OMAPFB_SUSPENDED= 99,
+	OMAPFB_ACTIVE	= 100
+};
+
+struct omapfb_plane_struct {
+	int				idx;
+	struct omapfb_plane_info	info;
+	enum omapfb_color_format	color_mode;
+	struct omapfb_device		*fbdev;
+};
+
+struct omapfb_device {
+	int			state;
+	int                     ext_lcdc;               /* Using external
+                                                           LCD controller */
+	struct mutex		rqueue_mutex;
+
+	int			palette_size;
+	u32			pseudo_palette[17];
+
+	struct lcd_panel	*panel;			/* LCD panel */
+	struct lcd_ctrl         *ctrl;			/* LCD controller */
+	struct lcd_ctrl		*int_ctrl;		/* internal LCD ctrl */
+	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+							   interface */
+	struct device		*dev;
+	struct fb_var_screeninfo	new_var;	/* for mode changes */
+
+	struct omapfb_mem_desc		mem_desc;
+	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
+};
+
+struct omapfb_platform_data {
+	struct omap_lcd_config		lcd;
+	struct omapfb_mem_desc		mem_desc;
+	void				*ctrl_platform_data;
+};
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_register_panel(struct lcd_panel *panel);
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+				  unsigned long event);
+extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
+				   omapfb_notifier_callback_t callback,
+				   void *callback_data);
+extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
+extern int  omapfb_update_window_async(struct fb_info *fbi,
+				       struct omapfb_update_window *win,
+				       void (*callback)(void *),
+				       void *callback_data);
+
+/* in arch/arm/plat-omap/fb.c */
+extern void omapfb_set_ctrl_platform_data(void *pdata);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
new file mode 100644
index 00000000000..d57f20226b2
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_onenand_platform_data {
+	int			cs;
+	int			gpio_irq;
+	struct mtd_partition	*parts;
+	int			nr_parts;
+	int                     (*onenand_setup)(void __iomem *);
+	int			dma_channel;
+};
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/mach/param.h
new file mode 100644
index 00000000000..1eb4dc32697
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/param.h
@@ -0,0 +1,8 @@
+/*
+ *  arch/arm/plat-omap/include/mach/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ	CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
new file mode 100644
index 00000000000..bfa09325a5f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -0,0 +1,356 @@
+/*
+ * arch/arm/plat-omap/include/mach/pm.h
+ *
+ * Header file for OMAP Power Management Routines
+ *
+ * Author: MontaVista Software, Inc.
+ *	   support@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_PM_H
+#define __ASM_ARCH_OMAP_PM_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Register and offset definitions to be used in PM assembler code
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
+#define ARM_IDLECT1_ASM_OFFSET		0x04
+#define ARM_IDLECT2_ASM_OFFSET		0x08
+
+#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
+#define EMIFS_CONFIG_ASM_OFFSET		0x0c
+#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
+
+/*
+ * ----------------------------------------------------------------------------
+ * Power management bitmasks
+ * ----------------------------------------------------------------------------
+ */
+#define IDLE_WAIT_CYCLES		0x00000fff
+#define PERIPHERAL_ENABLE		0x2
+
+#define SELF_REFRESH_MODE		0x0c000001
+#define IDLE_EMIFS_REQUEST		0xc
+#define MODEM_32K_EN			0x1
+#define PER_EN				0x1
+
+#define CPU_SUSPEND_SIZE		200
+#define ULPD_LOW_PWR_EN			0x0001
+#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
+#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
+#define ULPD_POWER_CTRL_REG_VAL		0x0219
+
+#define DSP_IDLE_DELAY			10
+#define DSP_IDLE			0x0040
+#define DSP_RST				0x0004
+#define DSP_ENABLE			0x0002
+#define SUFFICIENT_DSP_RESET_TIME	1000
+#define DEFAULT_MPUI_CONFIG		0x05cf
+#define ENABLE_XORCLK			0x2
+#define DSP_CLOCK_ENABLE		0x2000
+#define DSP_IDLE_MODE			0x2
+#define TC_IDLE_REQUEST			(0x0000000c)
+
+#define IRQ_LEVEL2			(1<<0)
+#define IRQ_KEYBOARD			(1<<1)
+#define IRQ_UART2			(1<<15)
+
+#define PDE_BIT				0x08
+#define PWD_EN_BIT			0x04
+#define EN_PERCK_BIT			0x04
+
+#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
+#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
+#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
+#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
+
+/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
+#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
+#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP1610_IDLECT3_VAL		0x3f
+#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
+#define OMAP1610_IDLECT3		0xfffece24
+#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
+
+#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP730_IDLECT3_VAL		0x3f
+#define OMAP730_IDLECT3		0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+
+#if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP15XX) && \
+	!defined(CONFIG_ARCH_OMAP16XX) && \
+	!defined(CONFIG_ARCH_OMAP24XX)
+#error "Power management for this processor not implemented yet"
+#endif
+
+#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+/**
+ * clk_deny_idle - Prevents the clock from being idled during MPU idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+/**
+ * clk_allow_idle - Counters previous clk_deny_idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+extern void omap_pm_idle(void);
+extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap1510_cpu_suspend(unsigned short, unsigned short);
+extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap730_idle_loop_suspend(void);
+extern void omap1510_idle_loop_suspend(void);
+extern void omap1610_idle_loop_suspend(void);
+extern void omap24xx_idle_loop_suspend(void);
+
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+extern void omap_serial_wake_trigger(int enable);
+#else
+#define omap_serial_wakeup_init()	{}
+#define omap_serial_wake_trigger(x)	{}
+#endif	/* CONFIG_OMAP_SERIAL_WAKE */
+
+#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
+#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
+#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
+#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
+#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
+#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
+
+#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
+#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+
+#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
+#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+
+/*
+ * List of global OMAP registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+
+enum arm_save_state {
+	ARM_SLEEP_SAVE_START = 0,
+	/*
+	 * MPU control registers 32 bits
+	 */
+	ARM_SLEEP_SAVE_ARM_CKCTL,
+	ARM_SLEEP_SAVE_ARM_IDLECT1,
+	ARM_SLEEP_SAVE_ARM_IDLECT2,
+	ARM_SLEEP_SAVE_ARM_IDLECT3,
+	ARM_SLEEP_SAVE_ARM_EWUPCT,
+	ARM_SLEEP_SAVE_ARM_RSTCT1,
+	ARM_SLEEP_SAVE_ARM_RSTCT2,
+	ARM_SLEEP_SAVE_ARM_SYSST,
+	ARM_SLEEP_SAVE_SIZE
+};
+
+enum dsp_save_state {
+	DSP_SLEEP_SAVE_START = 0,
+	/*
+	 * DSP registers 16 bits
+	 */
+	DSP_SLEEP_SAVE_DSP_IDLECT2,
+	DSP_SLEEP_SAVE_SIZE
+};
+
+enum ulpd_save_state {
+	ULPD_SLEEP_SAVE_START = 0,
+	/*
+	 * ULPD registers 16 bits
+	 */
+	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
+	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
+	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
+	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
+	ULPD_SLEEP_SAVE_SIZE
+};
+
+enum mpui1510_save_state {
+	MPUI1510_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
+#if defined(CONFIG_ARCH_OMAP15XX)
+	MPUI1510_SLEEP_SAVE_SIZE
+#else
+	MPUI1510_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui730_save_state {
+	MPUI730_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI730_SLEEP_SAVE_MPUI_CTRL,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+	MPUI730_SLEEP_SAVE_SIZE
+#else
+	MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui1610_save_state {
+	MPUI1610_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
+#if defined(CONFIG_ARCH_OMAP16XX)
+	MPUI1610_SLEEP_SAVE_SIZE
+#else
+	MPUI1610_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum omap24xx_save_state {
+	OMAP24XX_SLEEP_SAVE_START = 0,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
+	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
+	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
+	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
+	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
+	OMAP24XX_SLEEP_SAVE_SIZE
+};
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
new file mode 100644
index 00000000000..56eba0fd6f6
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/plat-omap/include/mach/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+u32 omap_prcm_get_reset_sources(void);
+
+#endif
+
+
+
+
+
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
new file mode 100644
index 00000000000..787b7acec54
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -0,0 +1,75 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG		0x010
+#define SDRC_DLLA_CTRL		0x060
+#define SDRC_DLLA_STATUS	0x064
+#define SDRC_DLLB_CTRL		0x068
+#define SDRC_DLLB_STATUS	0x06C
+#define SDRC_POWER		0x070
+#define SDRC_MR_0		0x084
+#define SDRC_RFR_CTRL_0		0x0a4
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration.	A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+
+#define OMAP242X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG		0x010
+/* REVISIT: fill in other SMS registers here */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
new file mode 100644
index 00000000000..cc6bfa51ccb
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/serial.h
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#if defined(CONFIG_ARCH_OMAP1)
+/* OMAP1 serial ports */
+#define OMAP_UART1_BASE		0xfffb0000
+#define OMAP_UART2_BASE		0xfffb0800
+#define OMAP_UART3_BASE		0xfffb9800
+#elif defined(CONFIG_ARCH_OMAP2)
+/* OMAP2 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x4806e000
+#endif
+
+#define OMAP_MAX_NR_PORTS	3
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+#define is_omap_port(p)	({int __ret = 0;			\
+			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
+				__ret = 1;			\
+			__ret;					\
+			})
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
new file mode 100644
index 00000000000..e0932344998
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern int __init omap_sram_init(void);
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
new file mode 100644
index 00000000000..06a28c7b98d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset()		do {} while (0)
+#endif
+
+extern void omap_prcm_arch_reset(char mode);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void omap1_arch_reset(char mode)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
+				 DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	if (machine_is_voiceblue())
+		voiceblue_reset();
+	else
+		omap_writew(1, ARM_RSTCT1);
+}
+
+static inline void arch_reset(char mode)
+{
+	if (!cpu_is_omap24xx())
+		omap1_arch_reset(mode);
+	else
+		omap_prcm_arch_reset(mode);
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/mach/tc.h
new file mode 100644
index 00000000000..d2fcd789bb9
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/tc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE		0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
+#define EMIFF_MRS		(TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
+#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
+#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
+#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
+#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
+#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define	OMAP_CS0_PHYS		0x00000000
+#define	OMAP_CS0_SIZE		SZ_64M
+
+#define	OMAP_CS1_PHYS		0x04000000
+#define	OMAP_CS1_SIZE		SZ_64M
+
+#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
+#define	OMAP_CS1A_SIZE		SZ_32M
+
+#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define	OMAP_CS1B_SIZE		SZ_32M
+
+#define	OMAP_CS2_PHYS		0x08000000
+#define	OMAP_CS2_SIZE		SZ_64M
+
+#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
+#define	OMAP_CS2A_SIZE		SZ_32M
+
+#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define	OMAP_CS2B_SIZE		SZ_32M
+
+#define	OMAP_CS3_PHYS		0x0c000000
+#define	OMAP_CS3_SIZE		SZ_64M
+
+#ifndef	__ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
+#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
+#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
+
+#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif	/* __ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/mach/timex.h
new file mode 100644
index 00000000000..6d35767bc48
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timex.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/timex.h
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author:  Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
+#define __ASM_ARCH_OMAP_TIMEX_H
+
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
+#else
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+#endif
+
+#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
new file mode 100644
index 00000000000..0814c5f210c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/uncompress.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+unsigned int system_rev;
+
+#define UART_OMAP_MDR1		0x08	/* mode definition register */
+#define OMAP_ID_730		0x355F
+#define ID_MASK			0x7fff
+#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+
+static void putc(int c)
+{
+	volatile u8 * uart = 0;
+	int shift = 2;
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+	return;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
+	uart = (volatile u8 *)(OMAP_UART3_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
+	uart = (volatile u8 *)(OMAP_UART2_BASE);
+#else
+	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+	/* Determine which serial port to use */
+	do {
+		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
+		unsigned int omap_id = omap_get_id();
+
+		if (omap_id == OMAP_ID_730)
+			shift = 0;
+
+		if (check_port(uart, shift))
+			break;
+		/* Silent boot if no serial ports are enabled. */
+		return;
+	} while (0);
+#endif /* CONFIG_ARCH_OMAP1 */
+#endif
+
+	/*
+	 * Now, xmit each character
+	 */
+	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
new file mode 100644
index 00000000000..a56a610950c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -0,0 +1,141 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef	__ASM_ARCH_OMAP_USB_H
+#define	__ASM_ARCH_OMAP_USB_H
+
+#include <mach/board.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define OMAP1_OTG_BASE			0xfffb0400
+#define OMAP1_UDC_BASE			0xfffb4000
+#define OMAP1_OHCI_BASE			0xfffba000
+
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP2_UDC_BASE			0x4805e200
+#define OMAP2_OTG_BASE			0x4805e300
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OTG_BASE			OMAP1_OTG_BASE
+#define UDC_BASE			OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
+
+#else
+
+#define OTG_BASE			OMAP2_OTG_BASE
+#define UDC_BASE			OMAP2_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV				(OTG_BASE + 0x00)
+#define OTG_SYSCON_1			(OTG_BASE + 0x04)
+#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
+#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
+#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
+#	define	 OTG_IDLE_EN		(1 << 15)
+#	define	 HST_IDLE_EN		(1 << 14)
+#	define	 DEV_IDLE_EN		(1 << 13)
+#	define	 OTG_RESET_DONE		(1 << 2)
+#	define	 OTG_SOFT_RESET		(1 << 1)
+#define OTG_SYSCON_2			(OTG_BASE + 0x08)
+#	define	 OTG_EN			(1 << 31)
+#	define	 USBX_SYNCHRO		(1 << 30)
+#	define	 OTG_MST16		(1 << 29)
+#	define	 SRP_GPDATA		(1 << 28)
+#	define	 SRP_GPDVBUS		(1 << 27)
+#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
+#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
+#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
+#	define	 SRP_DPW		(1 << 14)
+#	define	 SRP_DATA		(1 << 13)
+#	define	 SRP_VBUS		(1 << 12)
+#	define	 OTG_PADEN		(1 << 10)
+#	define	 HMC_PADEN		(1 << 9)
+#	define	 UHOST_EN		(1 << 8)
+#	define	 HMC_TLLSPEED		(1 << 7)
+#	define	 HMC_TLLATTACH		(1 << 6)
+#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
+#define OTG_CTRL			(OTG_BASE + 0x0c)
+#	define	 OTG_USB2_EN		(1 << 29)
+#	define	 OTG_USB2_DP		(1 << 28)
+#	define	 OTG_USB2_DM		(1 << 27)
+#	define	 OTG_USB1_EN		(1 << 26)
+#	define	 OTG_USB1_DP		(1 << 25)
+#	define	 OTG_USB1_DM		(1 << 24)
+#	define	 OTG_USB0_EN		(1 << 23)
+#	define	 OTG_USB0_DP		(1 << 22)
+#	define	 OTG_USB0_DM		(1 << 21)
+#	define	 OTG_ASESSVLD		(1 << 20)
+#	define	 OTG_BSESSEND		(1 << 19)
+#	define	 OTG_BSESSVLD		(1 << 18)
+#	define	 OTG_VBUSVLD		(1 << 17)
+#	define	 OTG_ID			(1 << 16)
+#	define	 OTG_DRIVER_SEL		(1 << 15)
+#	define	 OTG_A_SETB_HNPEN	(1 << 12)
+#	define	 OTG_A_BUSREQ		(1 << 11)
+#	define	 OTG_B_HNPEN		(1 << 9)
+#	define	 OTG_B_BUSREQ		(1 << 8)
+#	define	 OTG_BUSDROP		(1 << 7)
+#	define	 OTG_PULLDOWN		(1 << 5)
+#	define	 OTG_PULLUP		(1 << 4)
+#	define	 OTG_DRV_VBUS		(1 << 3)
+#	define	 OTG_PD_VBUS		(1 << 2)
+#	define	 OTG_PU_VBUS		(1 << 1)
+#	define	 OTG_PU_ID		(1 << 0)
+#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
+#	define	 DRIVER_SWITCH		(1 << 15)
+#	define	 A_VBUS_ERR		(1 << 13)
+#	define	 A_REQ_TMROUT		(1 << 12)
+#	define	 A_SRP_DETECT		(1 << 11)
+#	define	 B_HNP_FAIL		(1 << 10)
+#	define	 B_SRP_TMROUT		(1 << 9)
+#	define	 B_SRP_DONE		(1 << 8)
+#	define	 B_SRP_STARTED		(1 << 7)
+#	define	 OPRT_CHG		(1 << 0)
+#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
+	// same bits as in IRQ_EN
+#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
+#	define	 OTGVPD			(1 << 14)
+#	define	 OTGVPU			(1 << 13)
+#	define	 OTGPUID		(1 << 12)
+#	define	 USB2VDR		(1 << 10)
+#	define	 USB2PDEN		(1 << 9)
+#	define	 USB2PUEN		(1 << 8)
+#	define	 USB1VDR		(1 << 6)
+#	define	 USB1PDEN		(1 << 5)
+#	define	 USB1PUEN		(1 << 4)
+#	define	 USB0VDR		(1 << 2)
+#	define	 USB0PDEN		(1 << 1)
+#	define	 USB0PUEN		(1 << 0)
+#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
+#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
+#	define	CONF_USB2_UNI_R		(1 << 8)
+#	define	CONF_USB1_UNI_R		(1 << 7)
+#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
+#	define	CONF_USB0_ISOLATE_R	(1 << 3)
+#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
+#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
+
+/* OMAP2 */
+#	define	USB_UNIDIR			0x0
+#	define	USB_UNIDIR_TLL			0x1
+#	define	USB_BIDIR			0x2
+#	define	USB_BIDIR_TLL			0x3
+#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
+#	define	USBT2TLL5PI		(1 << 17)
+#	define	USB0PUENACTLOI		(1 << 16)
+#	define	USBSTANDBYCTRL		(1 << 15)
+
+#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
new file mode 100644
index 00000000000..dc104cd9619
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/plat-omap/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 6f33f58bca4..1d7aec1a691 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -31,7 +31,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/arch/mailbox.h>
+#include <mach/mailbox.h>
 #include "mailbox.h"
 
 static struct omap_mbox *mboxes;
@@ -334,7 +334,7 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 	}
 
 	mbox->dev.class = &omap_mbox_class;
-	strlcpy(mbox->dev.bus_id, mbox->name, KOBJ_NAME_LEN);
+	dev_set_name(&mbox->dev, "%s", mbox->name);
 	dev_set_drvdata(&mbox->dev, mbox);
 
 	ret = device_register(&mbox->dev);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index c7f74064696..014d26574bb 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
 
@@ -651,7 +651,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
 	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
 				 src_port,
 				 OMAP_DMA_AMODE_CONSTANT,
-				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+				 mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1,
 				 0, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
@@ -712,7 +712,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
 	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
 				src_port,
 				OMAP_DMA_AMODE_CONSTANT,
-				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+				mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1,
 				0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
@@ -830,6 +830,7 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp[id].dma_tx_lch = -1;
 	mcbsp[id].dma_rx_lch = -1;
 
+	mcbsp[id].phys_base = pdata->phys_base;
 	mcbsp[id].io_base = pdata->virt_base;
 	/* Default I/O is IRQ based */
 	mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6f3f459731c..847df208c46 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index b5d307026c8..8bdbf979a25 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -33,7 +33,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 554ee58e129..ac67eeb6ca6 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/board.h>
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 2699c16d4da..777485e0636 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,12 +31,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
diff --git a/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h b/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
new file mode 100644
index 00000000000..06f982d5569
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init feroceon_l2_init(int l2_wt_override);
diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h
new file mode 100644
index 00000000000..64343051095
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/ehci-orion.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-orion/include/plat/ehci-orion.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_EHCI_ORION_H
+#define __PLAT_EHCI_ORION_H
+
+#include <linux/mbus.h>
+
+struct orion_ehci_data {
+	struct mbus_dram_target_info	*dram;
+};
+
+
+#endif
diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h
new file mode 100644
index 00000000000..f05eeab9496
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/irq.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/plat-orion/include/plat/irq.h
+ *
+ * Marvell Orion SoC IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_IRQ_H
+#define __PLAT_IRQ_H
+
+void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
+
+
+#endif
diff --git a/arch/arm/plat-orion/include/plat/mv_xor.h b/arch/arm/plat-orion/include/plat/mv_xor.h
new file mode 100644
index 00000000000..bd5f3bdb4ae
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/mv_xor.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/plat-orion/include/plat/mv_xor.h
+ *
+ * Marvell XOR platform device data definition file.
+ */
+
+#ifndef __PLAT_MV_XOR_H
+#define __PLAT_MV_XOR_H
+
+#include <linux/dmaengine.h>
+#include <linux/mbus.h>
+
+#define MV_XOR_SHARED_NAME	"mv_xor_shared"
+#define MV_XOR_NAME		"mv_xor"
+
+struct mbus_dram_target_info;
+
+struct mv_xor_platform_shared_data {
+	struct mbus_dram_target_info	*dram;
+};
+
+struct mv_xor_platform_data {
+	struct platform_device		*shared;
+	int				hw_id;
+	dma_cap_mask_t			cap_mask;
+	size_t				pool_size;
+};
+
+
+#endif
diff --git a/arch/arm/plat-orion/include/plat/orion_nand.h b/arch/arm/plat-orion/include/plat/orion_nand.h
new file mode 100644
index 00000000000..d6a4cfa3778
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/orion_nand.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/plat-orion/include/plat/orion_nand.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_ORION_NAND_H
+#define __PLAT_ORION_NAND_H
+
+/*
+ * Device bus NAND private data
+ */
+struct orion_nand_data {
+	struct mtd_partition *parts;
+	u32 nr_parts;
+	u8 ale;		/* address line number connected to ALE */
+	u8 cle;		/* address line number connected to CLE */
+	u8 width;	/* buswidth */
+	u8 chip_delay;
+};
+
+
+#endif
diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h
new file mode 100644
index 00000000000..3ebfef72b4e
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/pcie.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/plat-orion/include/plat/pcie.h
+ *
+ * Marvell Orion SoC PCIe handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PCIE_H
+#define __PLAT_PCIE_H
+
+u32 orion_pcie_dev_id(void __iomem *base);
+u32 orion_pcie_rev(void __iomem *base);
+int orion_pcie_link_up(void __iomem *base);
+int orion_pcie_x4_mode(void __iomem *base);
+int orion_pcie_get_local_bus_nr(void __iomem *base);
+void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_setup(void __iomem *base,
+		      struct mbus_dram_target_info *dram);
+int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
+		       u32 devfn, int where, int size, u32 *val);
+int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus,
+			   u32 devfn, int where, int size, u32 *val);
+int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus,
+			  u32 devfn, int where, int size, u32 *val);
+int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus,
+		       u32 devfn, int where, int size, u32 val);
+
+
+#endif
diff --git a/arch/arm/plat-orion/include/plat/time.h b/arch/arm/plat-orion/include/plat/time.h
new file mode 100644
index 00000000000..c06ca35f361
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/time.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/plat-orion/include/plat/time.h
+ *
+ * Marvell Orion SoC time handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_TIME_H
+#define __PLAT_TIME_H
+
+void orion_time_init(unsigned int irq, unsigned int tclk);
+
+
+#endif
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index fe66a183516..3f9d34fc738 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
 
 static void orion_irq_mask(u32 irq)
 {
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index ca32c60e14d..883902fead8 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -12,7 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
 
 /*
  * PCIe unit register offsets.
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 93c4ef9f006..544d6b327f3 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5e28c217b8c..0af3872fb76 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,7 @@ config PLAT_S3C24XX
 	depends on ARCH_S3C2410
 	default y if ARCH_S3C2410
 	select NO_IOPORT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 3ac8d8d781b..54d4b8e2263 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -40,12 +40,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 398c7ac2529..1863a1b1bc4 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -31,12 +31,12 @@
 #include <asm/mach/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index f5699cadb0c..89ce60eabd5 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -30,7 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/delay.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/system-reset.h>
+#include <mach/system-reset.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
@@ -169,9 +169,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
 	IODESC_ENT(UART)
 };
 
-
-static struct cpu_table *
-s3c_lookup_cpu(unsigned long idcode)
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
 {
 	struct cpu_table *tab;
 	int count;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index eea3b32ff79..d6fb76578b1 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -23,8 +23,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/fb.h>
-#include <asm/hardware.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 60f162dc4fa..08c2aaf14c4 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -29,12 +29,12 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
 #include <asm/mach/dma.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 
@@ -1304,7 +1304,7 @@ struct sysdev_class dma_sysclass = {
 
 /* kmem cache implementation */
 
-static void s3c2410_dma_cache_ctor(struct kmem_cache *c, void *p)
+static void s3c2410_dma_cache_ctor(void *p)
 {
 	memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ee99dcc7f0b..dd27334e3d7 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -27,11 +27,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
 {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 825d8d0c5ca..3caec6bad3e 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 struct s3c24xx_gpio_chip {
 	struct gpio_chip	chip;
@@ -39,7 +39,7 @@ static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
  * drivers themsevles.
  */
 
-int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	void __iomem *base = ourchip->base;
@@ -58,7 +58,7 @@ int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
-int s3c24xx_gpiolib_output(struct gpio_chip *chip,
+static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
 				  unsigned offset, int value)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
@@ -86,7 +86,8 @@ int s3c24xx_gpiolib_output(struct gpio_chip *chip,
 	return 0;
 }
 
-void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
+static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	void __iomem *base = ourchip->base;
@@ -104,7 +105,7 @@ void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
 	local_irq_restore(flags);
 }
 
-int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	unsigned long val;
@@ -150,8 +151,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
 	return 0;
 }
 
-
-struct s3c24xx_gpio_chip gpios[] = {
+static struct s3c24xx_gpio_chip gpios[] = {
 	[0] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
 		.chip	= {
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index ae2c5d7efc9..36cefe17683 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -56,14 +56,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
@@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
 	/* Set the external interrupt to pointed trigger type */
 	switch (type)
 	{
-		case IRQT_NOEDGE:
+		case IRQ_TYPE_NONE:
 			printk(KERN_WARNING "No edge setting!\n");
 			break;
 
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			newvalue = S3C2410_EXTINT_RISEEDGE;
 			break;
 
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			newvalue = S3C2410_EXTINT_FALLEDGE;
 			break;
 
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			newvalue = S3C2410_EXTINT_BOTHEDGE;
 			break;
 
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			newvalue = S3C2410_EXTINT_LOWLEV;
 			break;
 
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			newvalue = S3C2410_EXTINT_HILEV;
 			break;
 
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index cb0b3a4ccf1..e6705014b2a 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -24,12 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index bf5581a9aee..fc4b731a949 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -37,14 +37,14 @@
 #include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
 
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 2cda3e3c678..306cc9c6f9e 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -18,11 +18,11 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
@@ -89,7 +89,7 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
 
 /* TODO - add set rate calls. */
 
-struct clk clk_timer_scaler[] = {
+static struct clk clk_timer_scaler[] = {
 	[0]	= {
 		.name		= "pwm-scaler0",
 		.id		= -1,
@@ -102,7 +102,7 @@ struct clk clk_timer_scaler[] = {
 	},
 };
 
-struct clk clk_timer_tclk[] = {
+static struct clk clk_timer_tclk[] = {
 	[0]	= {
 		.name		= "pwm-tclk0",
 		.id		= -1,
@@ -232,7 +232,7 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-struct pwm_tdiv_clk clk_timer_tdiv[] = {
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
 	[0]	= {
 		.clk	= {
 			.name		= "pwm-tdiv",
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 18c4bdc49a0..7a92c938542 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/pwm.h>
 
+#include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c/regs-timer.h>
 
 struct pwm_device {
@@ -38,7 +39,7 @@ struct pwm_device {
 	unsigned char		 pwm_id;
 };
 
-#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg)
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
 
 static struct clk *clk_scaler[2];
 
@@ -168,7 +169,7 @@ void pwm_disable(struct pwm_device *pwm)
 
 EXPORT_SYMBOL(pwm_disable);
 
-unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
 {
 	unsigned long tin_parent_rate;
 	unsigned int div;
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index faf3e0f9f4e..8a5fffde663 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 2dbb2606d44..f3dc38cf1de 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 2f01af5f64c..281b4804ed3 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -25,15 +25,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index a646cbe8244..4981a08b6eb 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 766473b3f98..b471a21ae2e 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -32,9 +32,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 #include <asm/plat-s3c/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 #include <asm/mach/time.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index c2a4993a724..1dbaa29ac4d 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -6,4 +6,5 @@
 
 include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
+	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0be5630ff56..56281c030a7 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jul 7 16:25:39 2008
+# Last update: Wed Aug 13 21:56:02 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -843,7 +843,7 @@ borzoi			MACH_BORZOI		BORZOI			831
 gecko			MACH_GECKO		GECKO			832
 ds101			MACH_DS101		DS101			833
 omap_palmtt2		MACH_OMAP_PALMTT2	OMAP_PALMTT2		834
-xscale_palmld		MACH_XSCALE_PALMLD	XSCALE_PALMLD		835
+palmld			MACH_PALMLD		PALMLD			835
 cc9c			MACH_CC9C		CC9C			836
 sbc1670			MACH_SBC1670		SBC1670			837
 ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
@@ -852,7 +852,7 @@ ml696k			MACH_ML696K		ML696K			840
 arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
 osiris			MACH_OSIRIS		OSIRIS			842
 maestro			MACH_MAESTRO		MAESTRO			843
-tunge2			MACH_TUNGE2		TUNGE2			844
+palmte2			MACH_PALMTE2		PALMTE2			844
 ixbbm			MACH_IXBBM		IXBBM			845
 mx27ads			MACH_MX27ADS		MX27ADS			846
 ax8004			MACH_AX8004		AX8004			847
@@ -916,7 +916,7 @@ nxdb500			MACH_NXDB500		NXDB500			905
 apf9328			MACH_APF9328		APF9328			906
 omap_wipoq		MACH_OMAP_WIPOQ		OMAP_WIPOQ		907
 omap_twip		MACH_OMAP_TWIP		OMAP_TWIP		908
-palmtreo650		MACH_PALMTREO650	PALMTREO650		909
+palmt650		MACH_PALMT650		PALMT650		909
 acumen			MACH_ACUMEN		ACUMEN			910
 xp100			MACH_XP100		XP100			911
 fs2410			MACH_FS2410		FS2410			912
@@ -1096,7 +1096,7 @@ atc6			MACH_ATC6		ATC6			1086
 multmdw			MACH_MULTMDW		MULTMDW			1087
 mba2440			MACH_MBA2440		MBA2440			1088
 ecsd			MACH_ECSD		ECSD			1089
-zire31			MACH_ZIRE31		ZIRE31			1090
+palmz31			MACH_PALMZ31		PALMZ31			1090
 fsg			MACH_FSG		FSG			1091
 razor101		MACH_RAZOR101		RAZOR101		1092
 opera_tdm		MACH_OPERA_TDM		OPERA_TDM		1093
@@ -1810,5 +1810,54 @@ kriss_sensor		MACH_KRISS_SENSOR	KRISS_SENSOR		1819
 pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
-gprisc4			MACH_GPRISC4		GPRISC4			1823
+gprisc3			MACH_GPRISC4		GPRISC4			1823
 stamp9260		MACH_STAMP9260		STAMP9260		1824
+smdk6430		MACH_SMDK6430		SMDK6430		1825
+smdkc100		MACH_SMDKC100		SMDKC100		1826
+tavorevb		MACH_TAVOREVB		TAVOREVB		1827
+saar			MACH_SAAR		SAAR			1828
+deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
+at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
+linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
+hit_b0			MACH_HIT_B0		HIT_B0			1832
+adx_rmu			MACH_ADX_RMU		ADX_RMU			1833
+xg_cpe_main		MACH_XG_CPE_MAIN	XG_CPE_MAIN		1834
+edb9407a		MACH_EDB9407A		EDB9407A		1835
+dtb9608			MACH_DTB9608		DTB9608			1836
+em104v1			MACH_EM104V1		EM104V1			1837
+demo			MACH_DEMO		DEMO			1838
+logi9260		MACH_LOGI9260		LOGI9260		1839
+mx31_exm32		MACH_MX31_EXM32		MX31_EXM32		1840
+usb_a9g20		MACH_USB_A9G20		USB_A9G20		1841
+picproje2008		MACH_PICPROJE2008	PICPROJE2008		1842
+cs_e9315		MACH_CS_E9315		CS_E9315		1843
+qil_a9g20		MACH_QIL_A9G20		QIL_A9G20		1844
+sha_pon020		MACH_SHA_PON020		SHA_PON020		1845
+nad			MACH_NAD		NAD			1846
+sbc35_a9260		MACH_SBC35_A9260	SBC35_A9260		1847
+sbc35_a9g20		MACH_SBC35_A9G20	SBC35_A9G20		1848
+davinci_beginning	MACH_DAVINCI_BEGINNING	DAVINCI_BEGINNING	1849
+uwc			MACH_UWC		UWC			1850
+mxlads			MACH_MXLADS		MXLADS			1851
+htcnike			MACH_HTCNIKE		HTCNIKE			1852
+deister_pxa270		MACH_DEISTER_PXA270	DEISTER_PXA270		1853
+cme9210js		MACH_CME9210JS		CME9210JS		1854
+cc9p9360		MACH_CC9P9360		CC9P9360		1855
+mocha			MACH_MOCHA		MOCHA			1856
+wapd170ag		MACH_WAPD170AG		WAPD170AG		1857
+linkstation_mini	MACH_LINKSTATION_MINI	LINKSTATION_MINI	1858
+afeb9260		MACH_AFEB9260		AFEB9260		1859
+w90x900			MACH_W90X900		W90X900			1860
+w90x700			MACH_W90X700		W90X700			1861
+kt300ip			MACH_KT300IP		KT300IP			1862
+kt300ip_g20		MACH_KT300IP_G20	KT300IP_G20		1863
+srcm			MACH_SRCM		SRCM			1864
+wlnx_9260		MACH_WLNX_9260		WLNX_9260		1865
+openmoko_gta03		MACH_OPENMOKO_GTA03	OPENMOKO_GTA03		1866
+osprey2			MACH_OSPREY2		OSPREY2			1867
+kbio9260		MACH_KBIO9260		KBIO9260		1868
+ginza			MACH_GINZA		GINZA			1869
+a636n			MACH_A636N		A636N			1870
+imx27ipcam		MACH_IMX27IPCAM		IMX27IPCAM		1871
+nenoc			MACH_NEMOC		NEMOC			1872
+geneva			MACH_GENEVA		GENEVA			1873
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 45d63c98601..7c239a91627 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,6 +10,7 @@ config AVR32
 	# With EMBEDDED=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
 	select EMBEDDED
+	select HAVE_CLK
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	help
@@ -87,7 +88,7 @@ config PLATFORM_AT32AP
 	select SUBARCH_AVR32B
 	select MMU
 	select PERFORMANCE_COUNTERS
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
 
 #
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 17a3529341d..c9e1f0b47fd 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -23,9 +23,14 @@ KBUILD_AFLAGS	+= $(cpuflags-y)
 
 CHECKFLAGS	+= -D__avr32__ -D__BIG_ENDIAN
 
+machine-$(CONFIG_PLATFORM_AT32AP) := at32ap
+machdirs	:= $(patsubst %,arch/avr32/mach-%/, $(machine-y))
+
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
+
 head-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/head.o
 head-y					+= arch/avr32/kernel/head.o
-core-$(CONFIG_PLATFORM_AT32AP)		+= arch/avr32/mach-at32ap/
+core-y					+= $(machdirs)
 core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
 core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
@@ -34,20 +39,6 @@ core-y					+= arch/avr32/mm/
 drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
 libs-y					+= arch/avr32/lib/
 
-archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
-
-include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-avr32
-	$(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch
-else
-	$(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch
-endif
-	@touch $@
-
-archprepare: include/asm-avr32/.arch
-
 CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
 
 BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
index b07ae63aa54..55ccc9ce489 100644
--- a/arch/avr32/boards/atngw100/flash.c
+++ b/arch/avr32/boards/atngw100/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index c7fe94d03a1..b8286f1ce85 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -23,10 +23,10 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {
@@ -47,7 +47,7 @@ static struct eth_platform_data __initdata eth_data[2];
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
 		.modalias	= "mtd_dataflash",
-		.max_speed_hz	= 10000000,
+		.max_speed_hz	= 8000000,
 		.chip_select	= 0,
 	},
 };
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index af90b00100f..8dc48214f0b 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
 	bool "ATSTK1004"
 	select CPU_AT32AP7002
 
+config BOARD_ATSTK1006
+	bool "ATSTK1006"
+	select CPU_AT32AP7000
+
 endchoice
 
 
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index beead86462e..edecee03742 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
 obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
 obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
+obj-$(CONFIG_BOARD_ATSTK1006)	+= atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index e11659b732f..dfc3443e23a 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
 /*
- * ATSTK1002 daughterboard-specific init code
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
  *
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2007 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,10 +21,12 @@
 
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <asm/atmel-mci.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -35,6 +37,74 @@ unsigned long at32_board_osc_rates[3] = {
 	[2] = 12000000,	/* 12 MHz on osc1 */
 };
 
+/*
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
+ * have the AT32AP7000 chip on board; the difference is that the
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
+ * none.)
+ *
+ * The RAM difference is handled by the boot loader, so the only
+ * difference we end up handling here is the NAND flash.
+ */
+#ifdef CONFIG_BOARD_ATSTK1006
+#include <linux/mtd/partitions.h>
+#include <mach/smc.h>
+
+static struct smc_timing nand_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 10,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 30,
+	.nrd_pulse		= 15,
+	.ncs_write_pulse	= 30,
+	.nwe_pulse		= 15,
+
+	.read_cycle		= 30,
+	.write_cycle		= 30,
+
+	.ncs_read_recover	= 0,
+	.nrd_recover		= 15,
+	.ncs_write_recover	= 0,
+	/* WE# high -> RE# low min 60 ns */
+	.nwe_recover		= 50,
+};
+
+static struct smc_config nand_config __initdata = {
+	.bus_width		= 1,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.nwait_mode		= 0,
+	.byte_write		= 0,
+	.tdf_cycles		= 2,
+	.tdf_mode		= 0,
+};
+
+static struct mtd_partition nand_partitions[] = {
+	{
+		.name		= "main",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(nand_partitions);
+	return nand_partitions;
+}
+
+static struct atmel_nand_data atstk1006_nand_data __initdata = {
+	.cle		= 21,
+	.ale		= 22,
+	.rdy_pin	= GPIO_PIN_PB(30),
+	.enable_pin	= GPIO_PIN_PB(29),
+	.partition_info	= nand_part_info,
+};
+#endif
+
 struct eth_addr {
 	u8 addr[6];
 };
@@ -192,6 +262,21 @@ void __init setup_board(void)
 	at32_setup_serial_console(0);
 }
 
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+
+/* MMC card detect requires MACB0 *NOT* be used */
+#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(14),	/* gpio30/sdcd */
+	.wp_pin		= GPIO_PIN_PC(15),	/* gpio31/sdwp */
+};
+#define MCI_PDATA	&mci0_data
+#else
+#define MCI_PDATA	NULL
+#endif	/* SW6 for sd{cd,wp} routing */
+
+#endif	/* SW2 for MMC signal routing */
+
 static int __init atstk1002_init(void)
 {
 	/*
@@ -218,6 +303,12 @@ static int __init atstk1002_init(void)
 
 	at32_add_system_devices();
 
+#ifdef CONFIG_BOARD_ATSTK1006
+	smc_set_timing(&nand_config, &nand_timing);
+	smc_set_configuration(3, &nand_config);
+	at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
@@ -234,8 +325,8 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-	at32_add_device_mci(0, NULL);
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+	at32_add_device_mci(0, MCI_PDATA);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index ea109f435a8..0cf664174c1 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -20,10 +20,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -154,7 +154,7 @@ static int __init atstk1003_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0);
+	at32_add_device_mci(0, NULL);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index c7236df74d7..50a5273e591 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -22,10 +22,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -137,7 +137,7 @@ static int __init atstk1004_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0);
+	at32_add_device_mci(0, NULL);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
 			     fbmem_start, fbmem_size, 0);
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
index 3d0a102ad45..6e4d561977f 100644
--- a/arch/avr32/boards/atstk1000/flash.c
+++ b/arch/avr32/boards/atstk1000/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 8bedf93876a..2d6b560115d 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -18,9 +18,9 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
diff --git a/arch/avr32/boot/images/.gitignore b/arch/avr32/boot/images/.gitignore
new file mode 100644
index 00000000000..64ea9d0141d
--- /dev/null
+++ b/arch/avr32/boot/images/.gitignore
@@ -0,0 +1,4 @@
+uImage
+uImage.srec
+vmlinux.cso
+sfdwarf.log
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 119edb839ac..541520912c5 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:59 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 16:00:47 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -78,10 +78,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -98,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,6 +149,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -160,6 +168,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -174,6 +183,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -205,10 +220,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -222,6 +233,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -339,8 +351,10 @@ CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -499,7 +513,6 @@ CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,21 +620,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -646,27 +673,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -685,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -716,10 +749,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -740,7 +769,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -759,21 +788,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -783,6 +815,7 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -821,10 +854,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -844,6 +880,19 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
@@ -921,6 +970,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -931,17 +981,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1017,6 +1066,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1037,6 +1088,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1101,6 +1153,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1141,12 +1197,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index c6d02eac879..69fce6b6a78 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:30:20 2008
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 16:02:27 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -77,10 +77,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -91,12 +97,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -130,6 +137,7 @@ CONFIG_BOARD_ATSTK1000=y
 CONFIG_BOARD_ATSTK1002=y
 # CONFIG_BOARD_ATSTK1003 is not set
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -150,6 +158,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -168,6 +177,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -182,6 +192,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -213,10 +229,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -230,6 +242,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -284,6 +297,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -474,6 +488,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -483,7 +498,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -625,21 +639,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -664,27 +692,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -703,6 +736,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -754,6 +788,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -761,15 +798,7 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -783,37 +812,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -836,7 +839,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -855,21 +858,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -879,7 +885,9 @@ CONFIG_LEDS_CLASS=m
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -918,10 +926,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -941,18 +952,31 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
 # CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
+CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1018,6 +1042,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1028,13 +1053,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1104,6 +1128,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1124,6 +1150,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1188,6 +1215,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1228,12 +1259,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 5a4ae6b5d28..5477ed3183b 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:33:05 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:34:44 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -80,10 +80,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -93,12 +99,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -132,6 +139,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 CONFIG_BOARD_ATSTK1003=y
 # CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -152,6 +160,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -170,6 +179,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
@@ -184,6 +194,12 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -215,10 +231,6 @@ CONFIG_CPU_FREQ_AT32AP=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,6 +461,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -458,7 +471,6 @@ CONFIG_PATA_AT32=m
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -575,21 +587,35 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+CONFIG_AT24=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -614,27 +640,32 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -653,6 +684,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -684,15 +716,7 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -706,37 +730,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -759,7 +757,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -778,21 +776,24 @@ CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-CONFIG_MMC=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD Card Drivers
 #
-CONFIG_MMC_BLOCK=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
+CONFIG_MMC_TEST=m
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -802,7 +803,9 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -841,10 +844,13 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -864,8 +870,20 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
-CONFIG_UIO=m
-# CONFIG_UIO_SMX is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -943,6 +961,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1011,6 +1030,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1029,6 +1050,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1056,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
@@ -1063,6 +1086,7 @@ CONFIG_CRC7=m
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index a0912fb7c92..69e6c0d08ce 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon May 26 13:34:57 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:38:56 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -69,10 +69,16 @@ CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 # CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -97,6 +103,7 @@ CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATSTK1002 is not set
 # CONFIG_BOARD_ATSTK1003 is not set
 CONFIG_BOARD_ATSTK1004=y
+# CONFIG_BOARD_ATSTK1006 is not set
 # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
 # CONFIG_BOARD_ATSTK100X_SPI1 is not set
 # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@@ -115,6 +122,7 @@ CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
 # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
 # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
 # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@@ -133,6 +141,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 # CONFIG_NMI_DEBUGGING is not set
@@ -147,6 +156,8 @@ CONFIG_CMDLINE=""
 #
 # Power management options
 #
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
@@ -164,10 +175,6 @@ CONFIG_CMDLINE=""
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -390,24 +397,28 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# I2C GPIO expanders:
 #
 
 #
-# I2C GPIO expanders:
+# PCI GPIO expanders:
 #
 
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -426,6 +437,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -477,6 +489,9 @@ CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
@@ -484,10 +499,6 @@ CONFIG_LCD_LTV350QV=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -507,7 +518,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -525,6 +536,7 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -547,6 +559,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -566,6 +580,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_AT32AP700X=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -620,6 +635,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -638,12 +654,14 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
new file mode 100644
index 00000000000..8b6e54c9946
--- /dev/null
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -0,0 +1,1304 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 15:40:26 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_ATSTK1002 is not set
+# CONFIG_BOARD_ATSTK1003 is not set
+# CONFIG_BOARD_ATSTK1004 is not set
+CONFIG_BOARD_ATSTK1006=y
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_QUICKLIST=y
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_AT32=m
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=m
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_DW_DMAC=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
new file mode 100644
index 00000000000..3136628ba8d
--- /dev/null
+++ b/arch/avr32/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y	+= cachectl.h
diff --git a/arch/avr32/include/asm/a.out.h b/arch/avr32/include/asm/a.out.h
new file mode 100644
index 00000000000..e46375a34a7
--- /dev/null
+++ b/arch/avr32/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_AVR32_A_OUT_H
+#define __ASM_AVR32_A_OUT_H
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* __ASM_AVR32_A_OUT_H */
diff --git a/arch/avr32/include/asm/addrspace.h b/arch/avr32/include/asm/addrspace.h
new file mode 100644
index 00000000000..366794858ec
--- /dev/null
+++ b/arch/avr32/include/asm/addrspace.h
@@ -0,0 +1,43 @@
+/*
+ * Defitions for the address spaces of the AVR32 CPUs. Heavily based on
+ * include/asm-sh/addrspace.h
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ADDRSPACE_H
+#define __ASM_AVR32_ADDRSPACE_H
+
+#ifdef CONFIG_MMU
+
+/* Memory segments when segmentation is enabled */
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+/* Returns the privileged segment base of a given address */
+#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
+
+/* Returns the physical address of a PnSEG (n=1,2) address */
+#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
+
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
+				      | P1SEG))
+#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
+				      | P2SEG))
+#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
+				      | P3SEG))
+#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
+				      | P4SEG))
+
+#endif /* CONFIG_MMU */
+
+#endif /* __ASM_AVR32_ADDRSPACE_H */
diff --git a/arch/avr32/include/asm/asm.h b/arch/avr32/include/asm/asm.h
new file mode 100644
index 00000000000..a2c64f404b9
--- /dev/null
+++ b/arch/avr32/include/asm/asm.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ASM_H__
+#define __ASM_AVR32_ASM_H__
+
+#include <asm/sysreg.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#define mask_interrupts		ssrf	SYSREG_GM_OFFSET
+#define mask_exceptions		ssrf	SYSREG_EM_OFFSET
+#define unmask_interrupts	csrf	SYSREG_GM_OFFSET
+#define unmask_exceptions	csrf	SYSREG_EM_OFFSET
+
+#ifdef CONFIG_FRAME_POINTER
+	.macro	save_fp
+	st.w	--sp, r7
+	.endm
+	.macro	restore_fp
+	ld.w	r7, sp++
+	.endm
+	.macro	zero_fp
+	mov	r7, 0
+	.endm
+#else
+	.macro	save_fp
+	.endm
+	.macro	restore_fp
+	.endm
+	.macro	zero_fp
+	.endm
+#endif
+	.macro	get_thread_info reg
+	mov	\reg, sp
+	andl	\reg, ~(THREAD_SIZE - 1) & 0xffff
+	.endm
+
+	/* Save and restore registers */
+	.macro	save_min sr, tmp=lr
+	pushm	lr
+	mfsr	\tmp, \sr
+	zero_fp
+	st.w	--sp, \tmp
+	.endm
+
+	.macro	restore_min sr, tmp=lr
+	ld.w	\tmp, sp++
+	mtsr	\sr, \tmp
+	popm	lr
+	.endm
+
+	.macro	save_half sr, tmp=lr
+	save_fp
+	pushm	r8-r9,r10,r11,r12,lr
+	zero_fp
+	mfsr	\tmp, \sr
+	st.w	--sp, \tmp
+	.endm
+
+	.macro	restore_half sr, tmp=lr
+	ld.w	\tmp, sp++
+	mtsr	\sr, \tmp
+	popm	r8-r9,r10,r11,r12,lr
+	restore_fp
+	.endm
+
+	.macro	save_full_user sr, tmp=lr
+	stmts	--sp, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr
+	st.w	--sp, lr
+	zero_fp
+	mfsr	\tmp, \sr
+	st.w	--sp, \tmp
+	.endm
+
+	.macro	restore_full_user sr, tmp=lr
+	ld.w	\tmp, sp++
+	mtsr	\sr, \tmp
+	ld.w	lr, sp++
+	ldmts	sp++, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr
+	.endm
+
+	/* uaccess macros */
+	.macro branch_if_kernel scratch, label
+	get_thread_info \scratch
+	ld.w	\scratch, \scratch[TI_flags]
+	bld	\scratch, TIF_USERSPACE
+	brcc	\label
+	.endm
+
+	.macro ret_if_privileged scratch, addr, size, ret
+	sub	\scratch, \size, 1
+	add	\scratch, \addr
+	retcs	\ret
+	retmi	\ret
+	.endm
+
+#endif /* __ASM_AVR32_ASM_H__ */
diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
new file mode 100644
index 00000000000..c2ea6e1c9aa
--- /dev/null
+++ b/arch/avr32/include/asm/atmel-mci.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_AVR32_ATMEL_MCI_H
+#define __ASM_AVR32_ATMEL_MCI_H
+
+struct mci_platform_data {
+	int			detect_pin;
+	int			wp_pin;
+};
+
+#endif /* __ASM_AVR32_ATMEL_MCI_H */
diff --git a/arch/avr32/include/asm/atomic.h b/arch/avr32/include/asm/atomic.h
new file mode 100644
index 00000000000..7ef3862a73d
--- /dev/null
+++ b/arch/avr32/include/asm/atomic.h
@@ -0,0 +1,201 @@
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc.
+ *
+ * But use these as seldom as possible since they are slower than
+ * regular operations.
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ATOMIC_H
+#define __ASM_AVR32_ATOMIC_H
+
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+#define ATOMIC_INIT(i)  { (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+/*
+ * atomic_sub_return - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v. Returns the resulting value.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	int result;
+
+	asm volatile(
+		"/* atomic_sub_return */\n"
+		"1:	ssrf	5\n"
+		"	ld.w	%0, %2\n"
+		"	sub	%0, %3\n"
+		"	stcond	%1, %0\n"
+		"	brne	1b"
+		: "=&r"(result), "=o"(v->counter)
+		: "m"(v->counter), "rKs21"(i)
+		: "cc");
+
+	return result;
+}
+
+/*
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v. Returns the resulting value.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int result;
+
+	if (__builtin_constant_p(i) && (i >= -1048575) && (i <= 1048576))
+		result = atomic_sub_return(-i, v);
+	else
+		asm volatile(
+			"/* atomic_add_return */\n"
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %1\n"
+			"	add	%0, %3\n"
+			"	stcond	%2, %0\n"
+			"	brne	1b"
+			: "=&r"(result), "=o"(v->counter)
+			: "m"(v->counter), "r"(i)
+			: "cc", "memory");
+
+	return result;
+}
+
+/*
+ * atomic_sub_unless - sub unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * If the atomic value v is not equal to u, this function subtracts a
+ * from v, and returns non zero. If v is equal to u then it returns
+ * zero. This is done as an atomic operation.
+*/
+static inline int atomic_sub_unless(atomic_t *v, int a, int u)
+{
+	int tmp, result = 0;
+
+	asm volatile(
+		"/* atomic_sub_unless */\n"
+		"1:	ssrf	5\n"
+		"	ld.w	%0, %3\n"
+		"	cp.w	%0, %5\n"
+		"	breq	1f\n"
+		"	sub	%0, %4\n"
+		"	stcond	%2, %0\n"
+		"	brne	1b\n"
+		"	mov	%1, 1\n"
+		"1:"
+		: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+		: "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
+		: "cc", "memory");
+
+	return result;
+}
+
+/*
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * If the atomic value v is not equal to u, this function adds a to v,
+ * and returns non zero. If v is equal to u then it returns zero. This
+ * is done as an atomic operation.
+*/
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int tmp, result;
+
+	if (__builtin_constant_p(a) && (a >= -1048575) && (a <= 1048576))
+		result = atomic_sub_unless(v, -a, u);
+	else {
+		result = 0;
+		asm volatile(
+			"/* atomic_add_unless */\n"
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %3\n"
+			"	cp.w	%0, %5\n"
+			"	breq	1f\n"
+			"	add	%0, %4\n"
+			"	stcond	%2, %0\n"
+			"	brne	1b\n"
+			"	mov	%1, 1\n"
+			"1:"
+			: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+			: "m"(v->counter), "r"(a), "ir"(u), "1"(result)
+			: "cc", "memory");
+	}
+
+	return result;
+}
+
+/*
+ * atomic_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static inline int atomic_sub_if_positive(int i, atomic_t *v)
+{
+	int result;
+
+	asm volatile(
+		"/* atomic_sub_if_positive */\n"
+		"1:	ssrf	5\n"
+		"	ld.w	%0, %2\n"
+		"	sub	%0, %3\n"
+		"	brlt	1f\n"
+		"	stcond	%1, %0\n"
+		"	brne	1b\n"
+		"1:"
+		: "=&r"(result), "=o"(v->counter)
+		: "m"(v->counter), "ir"(i)
+		: "cc", "memory");
+
+	return result;
+}
+
+#define atomic_xchg(v, new)	(xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, o, n)	(cmpxchg(&((v)->counter), (o), (n)))
+
+#define atomic_sub(i, v)	(void)atomic_sub_return(i, v)
+#define atomic_add(i, v)	(void)atomic_add_return(i, v)
+#define atomic_dec(v)		atomic_sub(1, (v))
+#define atomic_inc(v)		atomic_add(1, (v))
+
+#define atomic_dec_return(v)	atomic_sub_return(1, v)
+#define atomic_inc_return(v)	atomic_add_return(1, v)
+
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
+#define atomic_add_negative(i, v) (atomic_add_return(i, v) < 0)
+
+#define atomic_inc_not_zero(v)	atomic_add_unless(v, 1, 0)
+#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v)
+
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /*  __ASM_AVR32_ATOMIC_H */
diff --git a/arch/avr32/include/asm/auxvec.h b/arch/avr32/include/asm/auxvec.h
new file mode 100644
index 00000000000..d5dd435bf8f
--- /dev/null
+++ b/arch/avr32/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_AVR32_AUXVEC_H
+#define __ASM_AVR32_AUXVEC_H
+
+#endif /* __ASM_AVR32_AUXVEC_H */
diff --git a/arch/avr32/include/asm/bitops.h b/arch/avr32/include/asm/bitops.h
new file mode 100644
index 00000000000..1a50b69b1a1
--- /dev/null
+++ b/arch/avr32/include/asm/bitops.h
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_BITOPS_H
+#define __ASM_AVR32_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm/byteorder.h>
+#include <asm/system.h>
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long tmp;
+
+	if (__builtin_constant_p(nr)) {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %2\n"
+			"	sbr	%0, %3\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p)
+			: "m"(*p), "i"(nr)
+			: "cc");
+	} else {
+		unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %2\n"
+			"	or	%0, %3\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p)
+			: "m"(*p), "r"(mask)
+			: "cc");
+	}
+}
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long tmp;
+
+	if (__builtin_constant_p(nr)) {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %2\n"
+			"	cbr	%0, %3\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p)
+			: "m"(*p), "i"(nr)
+			: "cc");
+	} else {
+		unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %2\n"
+			"	andn	%0, %3\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p)
+			: "m"(*p), "r"(mask)
+			: "cc");
+	}
+}
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+	unsigned long tmp;
+
+	asm volatile(
+		"1:	ssrf	5\n"
+		"	ld.w	%0, %2\n"
+		"	eor	%0, %3\n"
+		"	stcond	%1, %0\n"
+		"	brne	1b"
+		: "=&r"(tmp), "=o"(*p)
+		: "m"(*p), "r"(mask)
+		: "cc");
+}
+
+/*
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+	unsigned long tmp, old;
+
+	if (__builtin_constant_p(nr)) {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %3\n"
+			"	mov	%2, %0\n"
+			"	sbr	%0, %4\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p), "=&r"(old)
+			: "m"(*p), "i"(nr)
+			: "memory", "cc");
+	} else {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%2, %3\n"
+			"	or	%0, %2, %4\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p), "=&r"(old)
+			: "m"(*p), "r"(mask)
+			: "memory", "cc");
+	}
+
+	return (old & mask) != 0;
+}
+
+/*
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+	unsigned long tmp, old;
+
+	if (__builtin_constant_p(nr)) {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %3\n"
+			"	mov	%2, %0\n"
+			"	cbr	%0, %4\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p), "=&r"(old)
+			: "m"(*p), "i"(nr)
+			: "memory", "cc");
+	} else {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %3\n"
+			"	mov	%2, %0\n"
+			"	andn	%0, %4\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p), "=&r"(old)
+			: "m"(*p), "r"(mask)
+			: "memory", "cc");
+	}
+
+	return (old & mask) != 0;
+}
+
+/*
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+	unsigned long tmp, old;
+
+	asm volatile(
+		"1:	ssrf	5\n"
+		"	ld.w	%2, %3\n"
+		"	eor	%0, %2, %4\n"
+		"	stcond	%1, %0\n"
+		"	brne	1b"
+		: "=&r"(tmp), "=o"(*p), "=&r"(old)
+		: "m"(*p), "r"(mask)
+		: "memory", "cc");
+
+	return (old & mask) != 0;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/* Find First bit Set */
+static inline unsigned long __ffs(unsigned long word)
+{
+	unsigned long result;
+
+	asm("brev %1\n\t"
+	    "clz %0,%1"
+	    : "=r"(result), "=&r"(word)
+	    : "1"(word));
+	return result;
+}
+
+/* Find First Zero */
+static inline unsigned long ffz(unsigned long word)
+{
+	return __ffs(~word);
+}
+
+/* Find Last bit Set */
+static inline int fls(unsigned long word)
+{
+	unsigned long result;
+
+	asm("clz %0,%1" : "=r"(result) : "r"(word));
+	return 32 - result;
+}
+
+unsigned long find_first_zero_bit(const unsigned long *addr,
+				  unsigned long size);
+unsigned long find_next_zero_bit(const unsigned long *addr,
+				 unsigned long size,
+				 unsigned long offset);
+unsigned long find_first_bit(const unsigned long *addr,
+			     unsigned long size);
+unsigned long find_next_bit(const unsigned long *addr,
+				 unsigned long size,
+				 unsigned long offset);
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ *
+ * The difference is that bit numbering starts at 1, and if no bit is set,
+ * the function returns 0.
+ */
+static inline int ffs(unsigned long word)
+{
+	if(word == 0)
+		return 0;
+	return __ffs(word) + 1;
+}
+
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __ASM_AVR32_BITOPS_H */
diff --git a/arch/avr32/include/asm/bug.h b/arch/avr32/include/asm/bug.h
new file mode 100644
index 00000000000..331d45bab18
--- /dev/null
+++ b/arch/avr32/include/asm/bug.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_BUG_H
+#define __ASM_AVR32_BUG_H
+
+#ifdef CONFIG_BUG
+
+/*
+ * According to our Chief Architect, this compact opcode is very
+ * unlikely to ever be implemented.
+ */
+#define AVR32_BUG_OPCODE	0x5df0
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.long	%1\n"					\
+		"	.short	%2\n"					\
+		"	.short	%3\n"					\
+		"	.org	2b + %4\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(AVR32_BUG_OPCODE), "i"(__FILE__),			\
+		  "i"(__LINE__), "i"(flags),				\
+		  "i"(sizeof(struct bug_entry)))
+
+#else
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.short	%1\n"					\
+		"	.org	2b + %2\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(AVR32_BUG_OPCODE), "i"(flags),			\
+		  "i"(sizeof(struct bug_entry)))
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()								\
+	do {								\
+		_BUG_OR_WARN(0);					\
+		for (;;);						\
+	} while (0)
+
+#define WARN_ON(condition)							\
+	({								\
+		int __ret_warn_on = !!(condition);			\
+		if (unlikely(__ret_warn_on))				\
+			_BUG_OR_WARN(BUGFLAG_WARNING);			\
+		unlikely(__ret_warn_on);				\
+	})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* __ASM_AVR32_BUG_H */
diff --git a/arch/avr32/include/asm/bugs.h b/arch/avr32/include/asm/bugs.h
new file mode 100644
index 00000000000..7635e770622
--- /dev/null
+++ b/arch/avr32/include/asm/bugs.h
@@ -0,0 +1,15 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *      void check_bugs(void);
+ */
+#ifndef __ASM_AVR32_BUGS_H
+#define __ASM_AVR32_BUGS_H
+
+static void __init check_bugs(void)
+{
+	cpu_data->loops_per_jiffy = loops_per_jiffy;
+}
+
+#endif /* __ASM_AVR32_BUGS_H */
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
new file mode 100644
index 00000000000..d77b48ba733
--- /dev/null
+++ b/arch/avr32/include/asm/byteorder.h
@@ -0,0 +1,31 @@
+/*
+ * AVR32 endian-conversion functions.
+ */
+#ifndef __ASM_AVR32_BYTEORDER_H
+#define __ASM_AVR32_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __CHECKER__
+extern unsigned long __builtin_bswap_32(unsigned long x);
+extern unsigned short __builtin_bswap_16(unsigned short x);
+#endif
+
+/*
+ * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends
+ * the result.
+ */
+#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
+#define __arch__swab32(x) __builtin_bswap_32(x)
+#define __arch__swab16(x) __builtin_bswap_16(x)
+#endif
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/arch/avr32/include/asm/cache.h b/arch/avr32/include/asm/cache.h
new file mode 100644
index 00000000000..d3cf35ab11a
--- /dev/null
+++ b/arch/avr32/include/asm/cache.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_AVR32_CACHE_H
+#define __ASM_AVR32_CACHE_H
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+#ifndef __ASSEMBLER__
+struct cache_info {
+	unsigned int ways;
+	unsigned int sets;
+	unsigned int linesz;
+};
+#endif /* __ASSEMBLER */
+
+/* Cache operation constants */
+#define ICACHE_FLUSH		0x00
+#define ICACHE_INVALIDATE	0x01
+#define ICACHE_LOCK		0x02
+#define ICACHE_UNLOCK		0x03
+#define ICACHE_PREFETCH		0x04
+
+#define DCACHE_FLUSH		0x08
+#define DCACHE_LOCK		0x09
+#define DCACHE_UNLOCK		0x0a
+#define DCACHE_INVALIDATE	0x0b
+#define DCACHE_CLEAN		0x0c
+#define DCACHE_CLEAN_INVAL	0x0d
+
+#endif /* __ASM_AVR32_CACHE_H */
diff --git a/arch/avr32/include/asm/cachectl.h b/arch/avr32/include/asm/cachectl.h
new file mode 100644
index 00000000000..4faf1ce6006
--- /dev/null
+++ b/arch/avr32/include/asm/cachectl.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_AVR32_CACHECTL_H
+#define __ASM_AVR32_CACHECTL_H
+
+/*
+ * Operations that can be performed through the cacheflush system call
+ */
+
+/* Clean the data cache, then invalidate the icache */
+#define CACHE_IFLUSH	0
+
+#endif /* __ASM_AVR32_CACHECTL_H */
diff --git a/arch/avr32/include/asm/cacheflush.h b/arch/avr32/include/asm/cacheflush.h
new file mode 100644
index 00000000000..670674749b2
--- /dev/null
+++ b/arch/avr32/include/asm/cacheflush.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_CACHEFLUSH_H
+#define __ASM_AVR32_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+#define CACHE_OP_ICACHE_INVALIDATE	0x01
+#define CACHE_OP_DCACHE_INVALIDATE	0x0b
+#define CACHE_OP_DCACHE_CLEAN		0x0c
+#define CACHE_OP_DCACHE_CLEAN_INVAL	0x0d
+
+/*
+ * Invalidate any cacheline containing virtual address vaddr without
+ * writing anything back to memory.
+ *
+ * Note that this function may corrupt unrelated data structures when
+ * applied on buffers that are not cacheline aligned in both ends.
+ */
+static inline void invalidate_dcache_line(void *vaddr)
+{
+	asm volatile("cache %0[0], %1"
+		     :
+		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_INVALIDATE)
+		     : "memory");
+}
+
+/*
+ * Make sure any cacheline containing virtual address vaddr is written
+ * to memory.
+ */
+static inline void clean_dcache_line(void *vaddr)
+{
+	asm volatile("cache %0[0], %1"
+		     :
+		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN)
+		     : "memory");
+}
+
+/*
+ * Make sure any cacheline containing virtual address vaddr is written
+ * to memory and then invalidate it.
+ */
+static inline void flush_dcache_line(void *vaddr)
+{
+	asm volatile("cache %0[0], %1"
+		     :
+		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN_INVAL)
+		     : "memory");
+}
+
+/*
+ * Invalidate any instruction cacheline containing virtual address
+ * vaddr.
+ */
+static inline void invalidate_icache_line(void *vaddr)
+{
+	asm volatile("cache %0[0], %1"
+		     :
+		     : "r"(vaddr), "n"(CACHE_OP_ICACHE_INVALIDATE)
+		     : "memory");
+}
+
+/*
+ * Applies the above functions on all lines that are touched by the
+ * specified virtual address range.
+ */
+void invalidate_dcache_region(void *start, size_t len);
+void clean_dcache_region(void *start, size_t len);
+void flush_dcache_region(void *start, size_t len);
+void invalidate_icache_region(void *start, size_t len);
+
+/*
+ * Make sure any pending writes are completed before continuing.
+ */
+#define flush_write_buffer() asm volatile("sync 0" : : : "memory")
+
+/*
+ * The following functions are called when a virtual mapping changes.
+ * We do not need to flush anything in this case.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+/*
+ * I think we need to implement this one to be able to reliably
+ * execute pages from RAMDISK. However, if we implement the
+ * flush_dcache_*() functions, it might not be needed anymore.
+ *
+ * #define flush_icache_page(vma, page)		do { } while (0)
+ */
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+/*
+ * These are (I think) related to D-cache aliasing.  We might need to
+ * do something here, but only for certain configurations.  No such
+ * configurations exist at this time.
+ */
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(page)		do { } while (0)
+#define flush_dcache_mmap_unlock(page)		do { } while (0)
+
+/*
+ * These are for I/D cache coherency. In this case, we do need to
+ * flush with all configurations.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+
+extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		unsigned long vaddr, void *dst, const void *src,
+		unsigned long len);
+
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+		struct page *page, unsigned long vaddr, void *dst,
+		const void *src, unsigned long len)
+{
+	memcpy(dst, src, len);
+}
+
+#endif /* __ASM_AVR32_CACHEFLUSH_H */
diff --git a/arch/avr32/include/asm/checksum.h b/arch/avr32/include/asm/checksum.h
new file mode 100644
index 00000000000..4ddbfd2486a
--- /dev/null
+++ b/arch/avr32/include/asm/checksum.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_CHECKSUM_H
+#define __ASM_AVR32_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+__wsum csum_partial_copy_generic(const void *src, void *dst, int len,
+				       __wsum sum, int *src_err_ptr,
+				       int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+static inline
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+				       int len, __wsum sum)
+{
+	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
+}
+
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					  int len, __wsum sum, int *err_ptr)
+{
+	return csum_partial_copy_generic((const void __force *)src, dst, len,
+					 sum, err_ptr, NULL);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum, tmp;
+
+	__asm__ __volatile__(
+		"	ld.w	%0, %1++\n"
+		"	ld.w	%3, %1++\n"
+		"	sub	%2, 4\n"
+		"	add	%0, %3\n"
+		"	ld.w	%3, %1++\n"
+		"	adc	%0, %0, %3\n"
+		"	ld.w	%3, %1++\n"
+		"	adc	%0, %0, %3\n"
+		"	acr	%0\n"
+		"1:	ld.w	%3, %1++\n"
+		"	add	%0, %3\n"
+		"	acr	%0\n"
+		"	sub	%2, 1\n"
+		"	brne	1b\n"
+		"	lsl	%3, %0, 16\n"
+		"	andl	%0, 0\n"
+		"	mov	%2, 0xffff\n"
+		"	add	%0, %3\n"
+		"	adc	%0, %0, %2\n"
+		"	com	%0\n"
+		"	lsr	%0, 16\n"
+		: "=r"(sum), "=r"(iph), "=r"(ihl), "=r"(tmp)
+		: "1"(iph), "2"(ihl)
+		: "memory", "cc");
+	return (__force __sum16)sum;
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	asm("	bfextu	%1, %0, 0, 16\n"
+	    "	lsr	%0, 16\n"
+	    "	add	%0, %1\n"
+	    "	bfextu	%1, %0, 16, 16\n"
+	    "	add	%0, %1"
+	    : "=&r"(sum), "=&r"(tmp)
+	    : "0"(sum));
+
+	return (__force __sum16)~sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned short len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	asm("	add	%0, %1\n"
+	    "	adc	%0, %0, %2\n"
+	    "	adc	%0, %0, %3\n"
+	    "	acr	%0"
+	    : "=r"(sum)
+	    : "r"(daddr), "r"(saddr), "r"(len + proto),
+	      "0"(sum)
+	    : "cc");
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+    return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* __ASM_AVR32_CHECKSUM_H */
diff --git a/arch/avr32/include/asm/cputime.h b/arch/avr32/include/asm/cputime.h
new file mode 100644
index 00000000000..e87e0f81cbe
--- /dev/null
+++ b/arch/avr32/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_CPUTIME_H
+#define __ASM_AVR32_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ASM_AVR32_CPUTIME_H */
diff --git a/arch/avr32/include/asm/current.h b/arch/avr32/include/asm/current.h
new file mode 100644
index 00000000000..c7b0549eab8
--- /dev/null
+++ b/arch/avr32/include/asm/current.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_AVR32_CURRENT_H
+#define __ASM_AVR32_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+inline static struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current get_current()
+
+#endif /* __ASM_AVR32_CURRENT_H */
diff --git a/arch/avr32/include/asm/delay.h b/arch/avr32/include/asm/delay.h
new file mode 100644
index 00000000000..a0ed9a9839a
--- /dev/null
+++ b/arch/avr32/include/asm/delay.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_AVR32_DELAY_H
+#define __ASM_AVR32_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/avr32/lib/delay.c
+ */
+
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long xloops);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
+	__udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+#endif /* __ASM_AVR32_DELAY_H */
diff --git a/arch/avr32/include/asm/device.h b/arch/avr32/include/asm/device.h
new file mode 100644
index 00000000000..d8f9872b0e2
--- /dev/null
+++ b/arch/avr32/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/avr32/include/asm/div64.h b/arch/avr32/include/asm/div64.h
new file mode 100644
index 00000000000..d7ddd4fdeca
--- /dev/null
+++ b/arch/avr32/include/asm/div64.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_DIV64_H
+#define __ASM_AVR32_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#endif /* __ASM_AVR32_DIV64_H */
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..0399359ab5d
--- /dev/null
+++ b/arch/avr32/include/asm/dma-mapping.h
@@ -0,0 +1,349 @@
+#ifndef __ASM_AVR32_DMA_MAPPING_H
+#define __ASM_AVR32_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	int direction);
+
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ */
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	/* Fix when needed. I really don't know of any limitations */
+	return 1;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+/*
+ * dma_map_single can't fail as it is implemented now.
+ */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t addr)
+{
+	return 0;
+}
+
+/**
+ * dma_alloc_coherent - allocate consistent memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, unbuffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_coherent
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_coherent
+ * @cpu_addr: CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_coherent().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void dma_free_coherent(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t handle);
+
+/**
+ * dma_alloc_writecombine - allocate write-combining memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, buffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *dma_alloc_writecombine(struct device *dev, size_t size,
+				    dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_writecombine
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_writecombine
+ * @cpu_addr: CPU-view address returned from dma_alloc_writecombine
+ * @handle: device-view address returned from dma_alloc_writecombine
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_writecombine().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void dma_free_writecombine(struct device *dev, size_t size,
+				  void *cpu_addr, dma_addr_t handle);
+
+/**
+ * dma_map_single - map a single buffer for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @cpu_addr: CPU direct mapped address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_single() or dma_sync_single().
+ */
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	dma_cache_sync(dev, cpu_addr, size, direction);
+	return virt_to_bus(cpu_addr);
+}
+
+/**
+ * dma_unmap_single - unmap a single buffer previously mapped
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+
+}
+
+/**
+ * dma_map_page - map a portion of a page for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_page() or dma_sync_single().
+ */
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	return dma_map_single(dev, page_address(page) + offset,
+			      size, direction);
+}
+
+/**
+ * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scatter-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+		char *virt;
+
+		sg[i].dma_address = page_to_bus(sg_page(&sg[i])) + sg[i].offset;
+		virt = sg_virt(&sg[i]);
+		dma_cache_sync(dev, virt, sg[i].length, direction);
+	}
+
+	return nents;
+}
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a set of streaming mode DMA translations.
+ * Again, CPU read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+
+}
+
+/**
+ * dma_sync_single_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a single streaming mode DMA
+ * translation after a transfer.
+ *
+ * If you perform a dma_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the DMA mapping,
+ * you must call this function before doing so.  At the next point you
+ * give the DMA address back to the card, you must first perform a
+ * dma_sync_single_for_device, and then the device again owns the
+ * buffer.
+ */
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			size_t size, enum dma_data_direction direction)
+{
+	/*
+	 * No need to do anything since the CPU isn't supposed to
+	 * touch this memory after we flushed it at mapping- or
+	 * sync-for-device time.
+	 */
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+			   size_t size, enum dma_data_direction direction)
+{
+	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction direction)
+{
+	/* just sync everything, that's all the pci API can do */
+	dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	/* just sync everything, that's all the pci API can do */
+	dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
+}
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as dma_sync_single_for_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+		    int nents, enum dma_data_direction direction)
+{
+	/*
+	 * No need to do anything since the CPU isn't supposed to
+	 * touch this memory after we flushed it at mapping- or
+	 * sync-for-device time.
+	 */
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+		       int nents, enum dma_data_direction direction)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, direction);
+	}
+}
+
+/* Now for the API extensions over the pci_ one */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
+{
+	return 1;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return boot_cpu_data.dcache.linesz;
+}
+
+#endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/arch/avr32/include/asm/dma.h b/arch/avr32/include/asm/dma.h
new file mode 100644
index 00000000000..9e91205590a
--- /dev/null
+++ b/arch/avr32/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_AVR32_DMA_H
+#define __ASM_AVR32_DMA_H
+
+/* The maximum address that we can perform a DMA transfer to on this platform.
+ * Not really applicable to AVR32, but some functions need it. */
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#endif /* __ASM_AVR32_DMA_H */
diff --git a/arch/avr32/include/asm/elf.h b/arch/avr32/include/asm/elf.h
new file mode 100644
index 00000000000..64ce40ee1d5
--- /dev/null
+++ b/arch/avr32/include/asm/elf.h
@@ -0,0 +1,108 @@
+#ifndef __ASM_AVR32_ELF_H
+#define __ASM_AVR32_ELF_H
+
+/* AVR32 relocation numbers */
+#define R_AVR32_NONE		0
+#define R_AVR32_32		1
+#define R_AVR32_16		2
+#define R_AVR32_8		3
+#define R_AVR32_32_PCREL	4
+#define R_AVR32_16_PCREL	5
+#define R_AVR32_8_PCREL		6
+#define R_AVR32_DIFF32		7
+#define R_AVR32_DIFF16		8
+#define R_AVR32_DIFF8		9
+#define R_AVR32_GOT32		10
+#define R_AVR32_GOT16		11
+#define R_AVR32_GOT8		12
+#define R_AVR32_21S		13
+#define R_AVR32_16U		14
+#define R_AVR32_16S		15
+#define R_AVR32_8S		16
+#define R_AVR32_8S_EXT		17
+#define R_AVR32_22H_PCREL	18
+#define R_AVR32_18W_PCREL	19
+#define R_AVR32_16B_PCREL	20
+#define R_AVR32_16N_PCREL	21
+#define R_AVR32_14UW_PCREL	22
+#define R_AVR32_11H_PCREL	23
+#define R_AVR32_10UW_PCREL	24
+#define R_AVR32_9H_PCREL	25
+#define R_AVR32_9UW_PCREL	26
+#define R_AVR32_HI16		27
+#define R_AVR32_LO16		28
+#define R_AVR32_GOTPC		29
+#define R_AVR32_GOTCALL		30
+#define R_AVR32_LDA_GOT		31
+#define R_AVR32_GOT21S		32
+#define R_AVR32_GOT18SW		33
+#define R_AVR32_GOT16S		34
+#define R_AVR32_GOT7UW		35
+#define R_AVR32_32_CPENT	36
+#define R_AVR32_CPCALL		37
+#define R_AVR32_16_CP		38
+#define R_AVR32_9W_CP		39
+#define R_AVR32_RELATIVE	40
+#define R_AVR32_GLOB_DAT	41
+#define R_AVR32_JMP_SLOT	42
+#define R_AVR32_ALIGN		43
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof (elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ( (x)->e_machine == EM_AVR32 )
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_AVR32
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+
+#endif /* __ASM_AVR32_ELF_H */
diff --git a/arch/avr32/include/asm/emergency-restart.h b/arch/avr32/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..3e7e014776b
--- /dev/null
+++ b/arch/avr32/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
+#define __ASM_AVR32_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */
diff --git a/arch/avr32/include/asm/errno.h b/arch/avr32/include/asm/errno.h
new file mode 100644
index 00000000000..558a7249f06
--- /dev/null
+++ b/arch/avr32/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_ERRNO_H
+#define __ASM_AVR32_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* __ASM_AVR32_ERRNO_H */
diff --git a/arch/avr32/include/asm/fb.h b/arch/avr32/include/asm/fb.h
new file mode 100644
index 00000000000..41baf84ad40
--- /dev/null
+++ b/arch/avr32/include/asm/fb.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
+				      & ~_PAGE_CACHABLE)
+				     | (_PAGE_BUFFER | _PAGE_DIRTY));
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/avr32/include/asm/fcntl.h b/arch/avr32/include/asm/fcntl.h
new file mode 100644
index 00000000000..14c0c4402b1
--- /dev/null
+++ b/arch/avr32/include/asm/fcntl.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_FCNTL_H
+#define __ASM_AVR32_FCNTL_H
+
+#include <asm-generic/fcntl.h>
+
+#endif /* __ASM_AVR32_FCNTL_H */
diff --git a/arch/avr32/include/asm/futex.h b/arch/avr32/include/asm/futex.h
new file mode 100644
index 00000000000..10419f14a68
--- /dev/null
+++ b/arch/avr32/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_FUTEX_H
+#define __ASM_AVR32_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif /* __ASM_AVR32_FUTEX_H */
diff --git a/arch/avr32/include/asm/gpio.h b/arch/avr32/include/asm/gpio.h
new file mode 100644
index 00000000000..b771f710596
--- /dev/null
+++ b/arch/avr32/include/asm/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_GPIO_H
+#define __ASM_AVR32_GPIO_H
+
+#include <mach/gpio.h>
+
+#endif /* __ASM_AVR32_GPIO_H */
diff --git a/arch/avr32/include/asm/hardirq.h b/arch/avr32/include/asm/hardirq.h
new file mode 100644
index 00000000000..267354356f6
--- /dev/null
+++ b/arch/avr32/include/asm/hardirq.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_AVR32_HARDIRQ_H
+#define __ASM_AVR32_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+void ack_bad_irq(unsigned int irq);
+
+/* Standard mappings for irq_cpustat_t above */
+#include <linux/irq_cpustat.h>
+
+#endif /* __ASSEMBLY__ */
+
+#define HARDIRQ_BITS	12
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* __ASM_AVR32_HARDIRQ_H */
diff --git a/arch/avr32/include/asm/hw_irq.h b/arch/avr32/include/asm/hw_irq.h
new file mode 100644
index 00000000000..218b0a6bfd1
--- /dev/null
+++ b/arch/avr32/include/asm/hw_irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_AVR32_HW_IRQ_H
+#define __ASM_AVR32_HW_IRQ_H
+
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+{
+	/* Nothing to do */
+}
+
+#endif /* __ASM_AVR32_HW_IRQ_H */
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
new file mode 100644
index 00000000000..a520f77ead9
--- /dev/null
+++ b/arch/avr32/include/asm/io.h
@@ -0,0 +1,312 @@
+#ifndef __ASM_AVR32_IO_H
+#define __ASM_AVR32_IO_H
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <mach/io.h>
+
+/* virt_to_phys will only work when address is in P1 or P2 */
+static __inline__ unsigned long virt_to_phys(volatile void *address)
+{
+	return PHYSADDR(address);
+}
+
+static __inline__ void * phys_to_virt(unsigned long address)
+{
+	return (void *)P1SEGADDR(address);
+}
+
+#define cached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
+#define uncached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
+#define phys_to_cached(addr)	((void *)P1SEGADDR(addr))
+#define phys_to_uncached(addr)	((void *)P2SEGADDR(addr))
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+
+extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
+{
+	*(volatile u8 __force *)addr = v;
+}
+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
+{
+	*(volatile u16 __force *)addr = v;
+}
+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
+{
+	*(volatile u32 __force *)addr = v;
+}
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 __force *)addr;
+}
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(const volatile u16 __force *)addr;
+}
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(const volatile u32 __force *)addr;
+}
+
+/* Convert I/O port address to virtual address */
+#ifndef __io
+# define __io(p)	((void *)phys_to_uncached(p))
+#endif
+
+/*
+ * Not really sure about the best way to slow down I/O on
+ * AVR32. Defining it as a no-op until we have an actual test case.
+ */
+#define SLOW_DOWN_IO	do { } while (0)
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwl, type)				\
+static inline void							\
+pfx##write##bwl(type val, volatile void __iomem *addr)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
+	__val = pfx##ioswab##bwl(__addr, val);				\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+}									\
+									\
+static inline type pfx##read##bwl(const volatile void __iomem *addr)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	return pfx##ioswab##bwl(__addr, __val);				\
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow)			\
+static inline void pfx##out##bwl##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __io(__swizzle_addr_##bwl(port));			\
+	__val = pfx##ioswab##bwl(__addr, val);				\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwl##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __io(__swizzle_addr_##bwl(port));			\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return pfx##ioswab##bwl(__addr, __val);				\
+}
+
+#define __BUILD_MEMORY_PFX(bus, bwl, type)				\
+	__BUILD_MEMORY_SINGLE(bus, bwl, type)
+
+#define BUILDIO_MEM(bwl, type)						\
+	__BUILD_MEMORY_PFX(, bwl, type)					\
+	__BUILD_MEMORY_PFX(__mem_, bwl, type)
+
+#define __BUILD_IOPORT_PFX(bus, bwl, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwl, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwl, type)					\
+	__BUILD_IOPORT_PFX(, bwl, type)					\
+	__BUILD_IOPORT_PFX(__mem_, bwl, type)
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+
+#define readb_relaxed			readb
+#define readw_relaxed			readw
+#define readl_relaxed			readl
+
+#define __BUILD_MEMORY_STRING(bwl, type)				\
+static inline void writes##bwl(volatile void __iomem *addr,		\
+			       const void *data, unsigned int count)	\
+{									\
+	const type *__data = data;					\
+									\
+	while (count--)							\
+		__mem_write##bwl(*__data++, addr);			\
+}									\
+									\
+static inline void reads##bwl(const volatile void __iomem *addr,	\
+			      void *data, unsigned int count)		\
+{									\
+	type *__data = data;						\
+									\
+	while (count--)							\
+		*__data++ = __mem_read##bwl(addr);			\
+}
+
+#define __BUILD_IOPORT_STRING(bwl, type)				\
+static inline void outs##bwl(unsigned long port, const void *data,	\
+			     unsigned int count)			\
+{									\
+	const type *__data = data;					\
+									\
+	while (count--)							\
+		__mem_out##bwl(*__data++, port);			\
+}									\
+									\
+static inline void ins##bwl(unsigned long port, void *data,		\
+			   unsigned int count)				\
+{									\
+	type *__data = data;						\
+									\
+	while (count--)							\
+		*__data++ = __mem_in##bwl(port);			\
+}
+
+#define BUILDSTRING(bwl, type)						\
+	__BUILD_MEMORY_STRING(bwl, type)				\
+	__BUILD_IOPORT_STRING(bwl, type)
+
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
+
+/*
+ * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
+ */
+#ifndef ioread8
+
+#define ioread8(p)		((unsigned int)readb(p))
+
+#define ioread16(p)		((unsigned int)readw(p))
+#define ioread16be(p)		((unsigned int)__raw_readw(p))
+
+#define ioread32(p)		((unsigned int)readl(p))
+#define ioread32be(p)		((unsigned int)__raw_readl(p))
+
+#define iowrite8(v,p)		writeb(v, p)
+
+#define iowrite16(v,p)		writew(v, p)
+#define iowrite16be(v,p)	__raw_writew(v, p)
+
+#define iowrite32(v,p)		writel(v, p)
+#define iowrite32be(v,p)	__raw_writel(v, p)
+
+#define ioread8_rep(p,d,c)	readsb(p,d,c)
+#define ioread16_rep(p,d,c)	readsw(p,d,c)
+#define ioread32_rep(p,d,c)	readsl(p,d,c)
+
+#define iowrite8_rep(p,s,c)	writesb(p,s,c)
+#define iowrite16_rep(p,s,c)	writesw(p,s,c)
+#define iowrite32_rep(p,s,c)	writesl(p,s,c)
+
+#endif
+
+static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
+				 unsigned long count)
+{
+	memcpy(to, (const void __force *)from, count);
+}
+
+static inline void  memcpy_toio(volatile void __iomem *to, const void * from,
+				unsigned long count)
+{
+	memcpy((void __force *)to, from, count);
+}
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val,
+			     unsigned long count)
+{
+	memset((void __force *)addr, val, count);
+}
+
+#define mmiowb()
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+extern void __iomem *__ioremap(unsigned long offset, size_t size,
+			       unsigned long flags);
+extern void __iounmap(void __iomem *addr);
+
+/*
+ * ioremap	-   map bus memory into CPU space
+ * @offset	bus address of the memory
+ * @size	size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to make
+ * bus memory CPU accessible via the readb/.../writel functions and
+ * the other mmio helpers. The returned address is not guaranteed to
+ * be usable directly as a virtual address.
+ */
+#define ioremap(offset, size)			\
+	__ioremap((offset), (size), 0)
+
+#define ioremap_nocache(offset, size)		\
+	__ioremap((offset), (size), 0)
+
+#define iounmap(addr)				\
+	__iounmap(addr)
+
+#define cached(addr) P1SEGADDR(addr)
+#define uncached(addr) P2SEGADDR(addr)
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+#define page_to_bus page_to_phys
+#define bus_to_page phys_to_page
+
+/*
+ * Create a virtual mapping cookie for an IO port range.  There exists
+ * no such thing as port-based I/O on AVR32, so a regular ioremap()
+ * should do what we need.
+ */
+#define ioport_map(port, nr)	ioremap(port, nr)
+#define ioport_unmap(port)	iounmap(port)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif /* __ASM_AVR32_IO_H */
diff --git a/arch/avr32/include/asm/ioctl.h b/arch/avr32/include/asm/ioctl.h
new file mode 100644
index 00000000000..c8472c1398e
--- /dev/null
+++ b/arch/avr32/include/asm/ioctl.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_IOCTL_H
+#define __ASM_AVR32_IOCTL_H
+
+#include <asm-generic/ioctl.h>
+
+#endif /* __ASM_AVR32_IOCTL_H */
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
new file mode 100644
index 00000000000..0cf2c0a4502
--- /dev/null
+++ b/arch/avr32/include/asm/ioctls.h
@@ -0,0 +1,87 @@
+#ifndef __ASM_AVR32_IOCTLS_H
+#define __ASM_AVR32_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/arch/avr32/include/asm/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..1552c9698f5
--- /dev/null
+++ b/arch/avr32/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_AVR32_IPCBUF_H
+#define __ASM_AVR32_IPCBUF_H
+
+/*
+* The user_ipc_perm structure for AVR32 architecture.
+* Note extra padding because this structure is passed back and forth
+* between kernel and user space.
+*
+* Pad space is left for:
+* - 32-bit mode_t and seq
+* - 2 miscellaneous 32-bit values
+*/
+
+struct ipc64_perm
+{
+        __kernel_key_t          key;
+        __kernel_uid32_t        uid;
+        __kernel_gid32_t        gid;
+        __kernel_uid32_t        cuid;
+        __kernel_gid32_t        cgid;
+        __kernel_mode_t         mode;
+        unsigned short          __pad1;
+        unsigned short          seq;
+        unsigned short          __pad2;
+        unsigned long           __unused1;
+        unsigned long           __unused2;
+};
+
+#endif /* __ASM_AVR32_IPCBUF_H */
diff --git a/arch/avr32/include/asm/irq.h b/arch/avr32/include/asm/irq.h
new file mode 100644
index 00000000000..6fa8913f854
--- /dev/null
+++ b/arch/avr32/include/asm/irq.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_AVR32_IRQ_H
+#define __ASM_AVR32_IRQ_H
+
+#define NR_INTERNAL_IRQS	64
+
+#include <mach/irq.h>
+
+#ifndef NR_IRQS
+#define NR_IRQS			(NR_INTERNAL_IRQS)
+#endif
+
+#define irq_canonicalize(i)	(i)
+
+#ifndef __ASSEMBLER__
+int nmi_enable(void);
+void nmi_disable(void);
+
+/*
+ * Returns a bitmask of pending interrupts in a group.
+ */
+extern unsigned long intc_get_pending(unsigned int group);
+#endif
+
+#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/arch/avr32/include/asm/irq_regs.h b/arch/avr32/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/avr32/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/avr32/include/asm/irqflags.h b/arch/avr32/include/asm/irqflags.h
new file mode 100644
index 00000000000..93570daac38
--- /dev/null
+++ b/arch/avr32/include/asm/irqflags.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_IRQFLAGS_H
+#define __ASM_AVR32_IRQFLAGS_H
+
+#include <asm/sysreg.h>
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	return sysreg_read(SR);
+}
+
+#define raw_local_save_flags(x)					\
+	do { (x) = __raw_local_save_flags(); } while (0)
+
+/*
+ * This will restore ALL status register flags, not only the interrupt
+ * mask flag.
+ *
+ * The empty asm statement informs the compiler of this fact while
+ * also serving as a barrier.
+ */
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	sysreg_write(SR, flags);
+	asm volatile("" : : : "memory", "cc");
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory");
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory");
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags & SYSREG_BIT(GM)) != 0;
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+
+#define raw_local_irq_save(flags)				\
+	do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* __ASM_AVR32_IRQFLAGS_H */
diff --git a/arch/avr32/include/asm/kdebug.h b/arch/avr32/include/asm/kdebug.h
new file mode 100644
index 00000000000..ca4f9542365
--- /dev/null
+++ b/arch/avr32/include/asm/kdebug.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_AVR32_KDEBUG_H
+#define __ASM_AVR32_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_BREAKPOINT,
+	DIE_SSTEP,
+	DIE_NMI,
+};
+
+#endif /* __ASM_AVR32_KDEBUG_H */
diff --git a/arch/avr32/include/asm/kmap_types.h b/arch/avr32/include/asm/kmap_types.h
new file mode 100644
index 00000000000..b7f5c687010
--- /dev/null
+++ b/arch/avr32/include/asm/kmap_types.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_AVR32_KMAP_TYPES_H
+#define __ASM_AVR32_KMAP_TYPES_H
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_PTE2,
+D(10)	KM_IRQ0,
+D(11)	KM_IRQ1,
+D(12)	KM_SOFTIRQ0,
+D(13)	KM_SOFTIRQ1,
+D(14)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* __ASM_AVR32_KMAP_TYPES_H */
diff --git a/arch/avr32/include/asm/kprobes.h b/arch/avr32/include/asm/kprobes.h
new file mode 100644
index 00000000000..996cb656474
--- /dev/null
+++ b/arch/avr32/include/asm/kprobes.h
@@ -0,0 +1,35 @@
+/*
+ * Kernel Probes (KProbes)
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_KPROBES_H
+#define __ASM_AVR32_KPROBES_H
+
+#include <linux/types.h>
+
+typedef u16	kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0xd673	/* breakpoint */
+#define MAX_INSN_SIZE		2
+
+#define kretprobe_blacklist_size 0
+
+#define arch_remove_kprobe(p)	do { } while (0)
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	kprobe_opcode_t	insn[MAX_INSN_SIZE];
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+
+#define flush_insn_slot(p)	do { } while (0)
+
+#endif /* __ASM_AVR32_KPROBES_H */
diff --git a/arch/avr32/include/asm/linkage.h b/arch/avr32/include/asm/linkage.h
new file mode 100644
index 00000000000..f7b285e910d
--- /dev/null
+++ b/arch/avr32/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .balign 2
+#define __ALIGN_STR ".balign 2"
+
+#endif /* __ASM_LINKAGE_H */
diff --git a/arch/avr32/include/asm/local.h b/arch/avr32/include/asm/local.h
new file mode 100644
index 00000000000..1c1619694da
--- /dev/null
+++ b/arch/avr32/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_LOCAL_H
+#define __ASM_AVR32_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __ASM_AVR32_LOCAL_H */
diff --git a/arch/avr32/include/asm/mach/serial_at91.h b/arch/avr32/include/asm/mach/serial_at91.h
new file mode 100644
index 00000000000..55b317a8906
--- /dev/null
+++ b/arch/avr32/include/asm/mach/serial_at91.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/mach/serial_at91.h
+ *
+ *  Based on serial_sa1100.h  by Nicolas Pitre
+ *
+ *  Copyright (C) 2002 ATMEL Rousset
+ *
+ *  Low level machine dependent UART functions.
+ */
+
+struct uart_port;
+
+/*
+ * This is a temporary structure for registering these
+ * functions; it is intended to be discarded after boot.
+ */
+struct atmel_port_fns {
+	void	(*set_mctrl)(struct uart_port *, u_int);
+	u_int	(*get_mctrl)(struct uart_port *);
+	void	(*enable_ms)(struct uart_port *);
+	void	(*pm)(struct uart_port *, u_int, u_int);
+	int	(*set_wake)(struct uart_port *, u_int);
+	int	(*open)(struct uart_port *);
+	void	(*close)(struct uart_port *);
+};
+
+#if defined(CONFIG_SERIAL_ATMEL)
+void atmel_register_uart_fns(struct atmel_port_fns *fns);
+#else
+#define atmel_register_uart_fns(fns) do { } while (0)
+#endif
+
+
diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/asm/mman.h
new file mode 100644
index 00000000000..648f91e7187
--- /dev/null
+++ b/arch/avr32/include/asm/mman.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_AVR32_MMAN_H__
+#define __ASM_AVR32_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __ASM_AVR32_MMAN_H__ */
diff --git a/arch/avr32/include/asm/mmu.h b/arch/avr32/include/asm/mmu.h
new file mode 100644
index 00000000000..60c2d2650d3
--- /dev/null
+++ b/arch/avr32/include/asm/mmu.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_AVR32_MMU_H
+#define __ASM_AVR32_MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#define MMU_ITLB_ENTRIES	64
+#define MMU_DTLB_ENTRIES	64
+
+#endif /* __ASM_AVR32_MMU_H */
diff --git a/arch/avr32/include/asm/mmu_context.h b/arch/avr32/include/asm/mmu_context.h
new file mode 100644
index 00000000000..27ff2340710
--- /dev/null
+++ b/arch/avr32/include/asm/mmu_context.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * ASID handling taken from SH implementation.
+ *   Copyright (C) 1999 Niibe Yutaka
+ *   Copyright (C) 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_MMU_CONTEXT_H
+#define __ASM_AVR32_MMU_CONTEXT_H
+
+#include <asm/tlbflush.h>
+#include <asm/sysreg.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * The MMU "context" consists of two things:
+ *    (a) TLB cache version
+ *    (b) ASID (Address Space IDentifier)
+ */
+#define MMU_CONTEXT_ASID_MASK		0x000000ff
+#define MMU_CONTEXT_VERSION_MASK	0xffffff00
+#define MMU_CONTEXT_FIRST_VERSION       0x00000100
+#define NO_CONTEXT			0
+
+#define MMU_NO_ASID			0x100
+
+/* Virtual Page Number mask */
+#define MMU_VPN_MASK	0xfffff000
+
+/* Cache of MMU context last used */
+extern unsigned long mmu_context_cache;
+
+/*
+ * Get MMU context if needed
+ */
+static inline void
+get_mmu_context(struct mm_struct *mm)
+{
+	unsigned long mc = mmu_context_cache;
+
+	if (((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0)
+		/* It's up to date, do nothing */
+		return;
+
+	/* It's old, we need to get new context with new version */
+	mc = ++mmu_context_cache;
+	if (!(mc & MMU_CONTEXT_ASID_MASK)) {
+		/*
+		 * We have exhausted all ASIDs of this version.
+		 * Flush the TLB and start new cycle.
+		 */
+		flush_tlb_all();
+		/*
+		 * Fix version. Note that we avoid version #0
+		 * to distinguish NO_CONTEXT.
+		 */
+		if (!mc)
+			mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
+	}
+	mm->context = mc;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+				       struct mm_struct *mm)
+{
+	mm->context = NO_CONTEXT;
+	return 0;
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	/* Do nothing */
+}
+
+static inline void set_asid(unsigned long asid)
+{
+	/* XXX: We're destroying TLBEHI[8:31] */
+	sysreg_write(TLBEHI, asid & MMU_CONTEXT_ASID_MASK);
+	cpu_sync_pipeline();
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long asid;
+
+	asid = sysreg_read(TLBEHI);
+	return asid & MMU_CONTEXT_ASID_MASK;
+}
+
+static inline void activate_context(struct mm_struct *mm)
+{
+	get_mmu_context(mm);
+	set_asid(mm->context & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+				 struct mm_struct *next,
+				 struct task_struct *tsk)
+{
+	if (likely(prev != next)) {
+		unsigned long __pgdir = (unsigned long)next->pgd;
+
+		sysreg_write(PTBR, __pgdir);
+		activate_context(next);
+	}
+}
+
+#define deactivate_mm(tsk,mm) do { } while(0)
+
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+
+static inline void enable_mmu(void)
+{
+	sysreg_write(MMUCR, (SYSREG_BIT(MMUCR_S)
+			     | SYSREG_BIT(E)
+			     | SYSREG_BIT(MMUCR_I)));
+	nop(); nop(); nop(); nop(); nop(); nop(); nop(); nop();
+
+	if (mmu_context_cache == NO_CONTEXT)
+		mmu_context_cache = MMU_CONTEXT_FIRST_VERSION;
+
+	set_asid(mmu_context_cache & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void disable_mmu(void)
+{
+	sysreg_write(MMUCR, SYSREG_BIT(MMUCR_S));
+}
+
+#endif /* __ASM_AVR32_MMU_CONTEXT_H */
diff --git a/arch/avr32/include/asm/module.h b/arch/avr32/include/asm/module.h
new file mode 100644
index 00000000000..451444538a1
--- /dev/null
+++ b/arch/avr32/include/asm/module.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_AVR32_MODULE_H
+#define __ASM_AVR32_MODULE_H
+
+struct mod_arch_syminfo {
+	unsigned long got_offset;
+	int got_initialized;
+};
+
+struct mod_arch_specific {
+	/* Starting offset of got in the module core memory. */
+	unsigned long got_offset;
+	/* Size of the got. */
+	unsigned long got_size;
+	/* Number of symbols in syminfo. */
+	int nsyms;
+	/* Additional symbol information (got offsets). */
+	struct mod_arch_syminfo *syminfo;
+};
+
+#define Elf_Shdr		Elf32_Shdr
+#define Elf_Sym			Elf32_Sym
+#define Elf_Ehdr		Elf32_Ehdr
+
+#define MODULE_PROC_FAMILY "AVR32v1"
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* __ASM_AVR32_MODULE_H */
diff --git a/arch/avr32/include/asm/msgbuf.h b/arch/avr32/include/asm/msgbuf.h
new file mode 100644
index 00000000000..ac18bc4da7f
--- /dev/null
+++ b/arch/avr32/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_AVR32_MSGBUF_H
+#define __ASM_AVR32_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_AVR32_MSGBUF_H */
diff --git a/arch/avr32/include/asm/mutex.h b/arch/avr32/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/avr32/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/avr32/include/asm/numnodes.h b/arch/avr32/include/asm/numnodes.h
new file mode 100644
index 00000000000..0b864d7ce33
--- /dev/null
+++ b/arch/avr32/include/asm/numnodes.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_AVR32_NUMNODES_H
+#define __ASM_AVR32_NUMNODES_H
+
+/* Max 4 nodes */
+#define NODES_SHIFT	2
+
+#endif /* __ASM_AVR32_NUMNODES_H */
diff --git a/arch/avr32/include/asm/ocd.h b/arch/avr32/include/asm/ocd.h
new file mode 100644
index 00000000000..6bef0949023
--- /dev/null
+++ b/arch/avr32/include/asm/ocd.h
@@ -0,0 +1,543 @@
+/*
+ * AVR32 OCD Interface and register definitions
+ *
+ * Copyright (C) 2004-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_OCD_H
+#define __ASM_AVR32_OCD_H
+
+/* OCD Register offsets. Abbreviations used below:
+ *
+ *      BP      Breakpoint
+ *      Comm    Communication
+ *      DT      Data Trace
+ *      PC      Program Counter
+ *      PID     Process ID
+ *      R/W     Read/Write
+ *      WP      Watchpoint
+ */
+#define OCD_DID				0x0000  /* Device ID */
+#define OCD_DC				0x0008  /* Development Control */
+#define OCD_DS				0x0010  /* Development Status */
+#define OCD_RWCS			0x001c  /* R/W Access Control */
+#define OCD_RWA				0x0024  /* R/W Access Address */
+#define OCD_RWD				0x0028  /* R/W Access Data */
+#define OCD_WT				0x002c  /* Watchpoint Trigger */
+#define OCD_DTC				0x0034  /* Data Trace Control */
+#define OCD_DTSA0			0x0038  /* DT Start Addr Channel 0 */
+#define OCD_DTSA1			0x003c  /* DT Start Addr Channel 1 */
+#define OCD_DTEA0			0x0048  /* DT End Addr Channel 0 */
+#define OCD_DTEA1			0x004c  /* DT End Addr Channel 1 */
+#define OCD_BWC0A			0x0058  /* PC BP/WP Control 0A */
+#define OCD_BWC0B			0x005c  /* PC BP/WP Control 0B */
+#define OCD_BWC1A			0x0060  /* PC BP/WP Control 1A */
+#define OCD_BWC1B			0x0064  /* PC BP/WP Control 1B */
+#define OCD_BWC2A			0x0068  /* PC BP/WP Control 2A */
+#define OCD_BWC2B			0x006c  /* PC BP/WP Control 2B */
+#define OCD_BWC3A			0x0070  /* Data BP/WP Control 3A */
+#define OCD_BWC3B			0x0074  /* Data BP/WP Control 3B */
+#define OCD_BWA0A			0x0078  /* PC BP/WP Address 0A */
+#define OCD_BWA0B			0x007c  /* PC BP/WP Address 0B */
+#define OCD_BWA1A			0x0080  /* PC BP/WP Address 1A */
+#define OCD_BWA1B			0x0084  /* PC BP/WP Address 1B */
+#define OCD_BWA2A			0x0088  /* PC BP/WP Address 2A */
+#define OCD_BWA2B			0x008c  /* PC BP/WP Address 2B */
+#define OCD_BWA3A			0x0090  /* Data BP/WP Address 3A */
+#define OCD_BWA3B			0x0094  /* Data BP/WP Address 3B */
+#define OCD_NXCFG			0x0100  /* Nexus Configuration */
+#define OCD_DINST			0x0104  /* Debug Instruction */
+#define OCD_DPC				0x0108  /* Debug Program Counter */
+#define OCD_CPUCM			0x010c  /* CPU Control Mask */
+#define OCD_DCCPU			0x0110  /* Debug Comm CPU */
+#define OCD_DCEMU			0x0114  /* Debug Comm Emulator */
+#define OCD_DCSR			0x0118  /* Debug Comm Status */
+#define OCD_PID				0x011c  /* Ownership Trace PID */
+#define OCD_EPC0			0x0120  /* Event Pair Control 0 */
+#define OCD_EPC1			0x0124  /* Event Pair Control 1 */
+#define OCD_EPC2			0x0128  /* Event Pair Control 2 */
+#define OCD_EPC3			0x012c  /* Event Pair Control 3 */
+#define OCD_AXC				0x0130  /* AUX port Control */
+
+/* Bits in DID */
+#define OCD_DID_MID_START		1
+#define OCD_DID_MID_SIZE		11
+#define OCD_DID_PN_START		12
+#define OCD_DID_PN_SIZE			16
+#define OCD_DID_RN_START		28
+#define OCD_DID_RN_SIZE			4
+
+/* Bits in DC */
+#define OCD_DC_TM_START			0
+#define OCD_DC_TM_SIZE			2
+#define OCD_DC_EIC_START		3
+#define OCD_DC_EIC_SIZE			2
+#define OCD_DC_OVC_START		5
+#define OCD_DC_OVC_SIZE			3
+#define OCD_DC_SS_BIT			8
+#define OCD_DC_DBR_BIT			12
+#define OCD_DC_DBE_BIT			13
+#define OCD_DC_EOS_START		20
+#define OCD_DC_EOS_SIZE			2
+#define OCD_DC_SQA_BIT			22
+#define OCD_DC_IRP_BIT			23
+#define OCD_DC_IFM_BIT			24
+#define OCD_DC_TOZ_BIT			25
+#define OCD_DC_TSR_BIT			26
+#define OCD_DC_RID_BIT			27
+#define OCD_DC_ORP_BIT			28
+#define OCD_DC_MM_BIT			29
+#define OCD_DC_RES_BIT			30
+#define OCD_DC_ABORT_BIT		31
+
+/* Bits in DS */
+#define OCD_DS_SSS_BIT			0
+#define OCD_DS_SWB_BIT			1
+#define OCD_DS_HWB_BIT			2
+#define OCD_DS_HWE_BIT			3
+#define OCD_DS_STP_BIT			4
+#define OCD_DS_DBS_BIT			5
+#define OCD_DS_BP_START			8
+#define OCD_DS_BP_SIZE			8
+#define OCD_DS_INC_BIT			24
+#define OCD_DS_BOZ_BIT			25
+#define OCD_DS_DBA_BIT			26
+#define OCD_DS_EXB_BIT			27
+#define OCD_DS_NTBF_BIT			28
+
+/* Bits in RWCS */
+#define OCD_RWCS_DV_BIT			0
+#define OCD_RWCS_ERR_BIT		1
+#define OCD_RWCS_CNT_START		2
+#define OCD_RWCS_CNT_SIZE		14
+#define OCD_RWCS_CRC_BIT		19
+#define OCD_RWCS_NTBC_START		20
+#define OCD_RWCS_NTBC_SIZE		2
+#define OCD_RWCS_NTE_BIT		22
+#define OCD_RWCS_NTAP_BIT		23
+#define OCD_RWCS_WRAPPED_BIT		24
+#define OCD_RWCS_CCTRL_START		25
+#define OCD_RWCS_CCTRL_SIZE		2
+#define OCD_RWCS_SZ_START		27
+#define OCD_RWCS_SZ_SIZE		3
+#define OCD_RWCS_RW_BIT			30
+#define OCD_RWCS_AC_BIT			31
+
+/* Bits in RWA */
+#define OCD_RWA_RWA_START		0
+#define OCD_RWA_RWA_SIZE		32
+
+/* Bits in RWD */
+#define OCD_RWD_RWD_START		0
+#define OCD_RWD_RWD_SIZE		32
+
+/* Bits in WT */
+#define OCD_WT_DTE_START		20
+#define OCD_WT_DTE_SIZE			3
+#define OCD_WT_DTS_START		23
+#define OCD_WT_DTS_SIZE			3
+#define OCD_WT_PTE_START		26
+#define OCD_WT_PTE_SIZE			3
+#define OCD_WT_PTS_START		29
+#define OCD_WT_PTS_SIZE			3
+
+/* Bits in DTC */
+#define OCD_DTC_T0WP_BIT		0
+#define OCD_DTC_T1WP_BIT		1
+#define OCD_DTC_ASID0EN_BIT		2
+#define OCD_DTC_ASID0_START		3
+#define OCD_DTC_ASID0_SIZE		8
+#define OCD_DTC_ASID1EN_BIT		11
+#define OCD_DTC_ASID1_START		12
+#define OCD_DTC_ASID1_SIZE		8
+#define OCD_DTC_RWT1_START		28
+#define OCD_DTC_RWT1_SIZE		2
+#define OCD_DTC_RWT0_START		30
+#define OCD_DTC_RWT0_SIZE		2
+
+/* Bits in DTSA0 */
+#define OCD_DTSA0_DTSA_START		0
+#define OCD_DTSA0_DTSA_SIZE		32
+
+/* Bits in DTSA1 */
+#define OCD_DTSA1_DTSA_START		0
+#define OCD_DTSA1_DTSA_SIZE		32
+
+/* Bits in DTEA0 */
+#define OCD_DTEA0_DTEA_START		0
+#define OCD_DTEA0_DTEA_SIZE		32
+
+/* Bits in DTEA1 */
+#define OCD_DTEA1_DTEA_START		0
+#define OCD_DTEA1_DTEA_SIZE		32
+
+/* Bits in BWC0A */
+#define OCD_BWC0A_ASIDEN_BIT		0
+#define OCD_BWC0A_ASID_START		1
+#define OCD_BWC0A_ASID_SIZE		8
+#define OCD_BWC0A_EOC_BIT		14
+#define OCD_BWC0A_AME_BIT		25
+#define OCD_BWC0A_BWE_START		30
+#define OCD_BWC0A_BWE_SIZE		2
+
+/* Bits in BWC0B */
+#define OCD_BWC0B_ASIDEN_BIT		0
+#define OCD_BWC0B_ASID_START		1
+#define OCD_BWC0B_ASID_SIZE		8
+#define OCD_BWC0B_EOC_BIT		14
+#define OCD_BWC0B_AME_BIT		25
+#define OCD_BWC0B_BWE_START		30
+#define OCD_BWC0B_BWE_SIZE		2
+
+/* Bits in BWC1A */
+#define OCD_BWC1A_ASIDEN_BIT		0
+#define OCD_BWC1A_ASID_START		1
+#define OCD_BWC1A_ASID_SIZE		8
+#define OCD_BWC1A_EOC_BIT		14
+#define OCD_BWC1A_AME_BIT		25
+#define OCD_BWC1A_BWE_START		30
+#define OCD_BWC1A_BWE_SIZE		2
+
+/* Bits in BWC1B */
+#define OCD_BWC1B_ASIDEN_BIT		0
+#define OCD_BWC1B_ASID_START		1
+#define OCD_BWC1B_ASID_SIZE		8
+#define OCD_BWC1B_EOC_BIT		14
+#define OCD_BWC1B_AME_BIT		25
+#define OCD_BWC1B_BWE_START		30
+#define OCD_BWC1B_BWE_SIZE		2
+
+/* Bits in BWC2A */
+#define OCD_BWC2A_ASIDEN_BIT		0
+#define OCD_BWC2A_ASID_START		1
+#define OCD_BWC2A_ASID_SIZE		8
+#define OCD_BWC2A_EOC_BIT		14
+#define OCD_BWC2A_AMB_START		20
+#define OCD_BWC2A_AMB_SIZE		5
+#define OCD_BWC2A_AME_BIT		25
+#define OCD_BWC2A_BWE_START		30
+#define OCD_BWC2A_BWE_SIZE		2
+
+/* Bits in BWC2B */
+#define OCD_BWC2B_ASIDEN_BIT		0
+#define OCD_BWC2B_ASID_START		1
+#define OCD_BWC2B_ASID_SIZE		8
+#define OCD_BWC2B_EOC_BIT		14
+#define OCD_BWC2B_AME_BIT		25
+#define OCD_BWC2B_BWE_START		30
+#define OCD_BWC2B_BWE_SIZE		2
+
+/* Bits in BWC3A */
+#define OCD_BWC3A_ASIDEN_BIT		0
+#define OCD_BWC3A_ASID_START		1
+#define OCD_BWC3A_ASID_SIZE		8
+#define OCD_BWC3A_SIZE_START		9
+#define OCD_BWC3A_SIZE_SIZE		3
+#define OCD_BWC3A_EOC_BIT		14
+#define OCD_BWC3A_BWO_START		16
+#define OCD_BWC3A_BWO_SIZE		2
+#define OCD_BWC3A_BME_START		20
+#define OCD_BWC3A_BME_SIZE		4
+#define OCD_BWC3A_BRW_START		28
+#define OCD_BWC3A_BRW_SIZE		2
+#define OCD_BWC3A_BWE_START		30
+#define OCD_BWC3A_BWE_SIZE		2
+
+/* Bits in BWC3B */
+#define OCD_BWC3B_ASIDEN_BIT		0
+#define OCD_BWC3B_ASID_START		1
+#define OCD_BWC3B_ASID_SIZE		8
+#define OCD_BWC3B_SIZE_START		9
+#define OCD_BWC3B_SIZE_SIZE		3
+#define OCD_BWC3B_EOC_BIT		14
+#define OCD_BWC3B_BWO_START		16
+#define OCD_BWC3B_BWO_SIZE		2
+#define OCD_BWC3B_BME_START		20
+#define OCD_BWC3B_BME_SIZE		4
+#define OCD_BWC3B_BRW_START		28
+#define OCD_BWC3B_BRW_SIZE		2
+#define OCD_BWC3B_BWE_START		30
+#define OCD_BWC3B_BWE_SIZE		2
+
+/* Bits in BWA0A */
+#define OCD_BWA0A_BWA_START		0
+#define OCD_BWA0A_BWA_SIZE		32
+
+/* Bits in BWA0B */
+#define OCD_BWA0B_BWA_START		0
+#define OCD_BWA0B_BWA_SIZE		32
+
+/* Bits in BWA1A */
+#define OCD_BWA1A_BWA_START		0
+#define OCD_BWA1A_BWA_SIZE		32
+
+/* Bits in BWA1B */
+#define OCD_BWA1B_BWA_START		0
+#define OCD_BWA1B_BWA_SIZE		32
+
+/* Bits in BWA2A */
+#define OCD_BWA2A_BWA_START		0
+#define OCD_BWA2A_BWA_SIZE		32
+
+/* Bits in BWA2B */
+#define OCD_BWA2B_BWA_START		0
+#define OCD_BWA2B_BWA_SIZE		32
+
+/* Bits in BWA3A */
+#define OCD_BWA3A_BWA_START		0
+#define OCD_BWA3A_BWA_SIZE		32
+
+/* Bits in BWA3B */
+#define OCD_BWA3B_BWA_START		0
+#define OCD_BWA3B_BWA_SIZE		32
+
+/* Bits in NXCFG */
+#define OCD_NXCFG_NXARCH_START		0
+#define OCD_NXCFG_NXARCH_SIZE		4
+#define OCD_NXCFG_NXOCD_START		4
+#define OCD_NXCFG_NXOCD_SIZE		4
+#define OCD_NXCFG_NXPCB_START		8
+#define OCD_NXCFG_NXPCB_SIZE		4
+#define OCD_NXCFG_NXDB_START		12
+#define OCD_NXCFG_NXDB_SIZE		4
+#define OCD_NXCFG_MXMSEO_BIT		16
+#define OCD_NXCFG_NXMDO_START		17
+#define OCD_NXCFG_NXMDO_SIZE		4
+#define OCD_NXCFG_NXPT_BIT		21
+#define OCD_NXCFG_NXOT_BIT		22
+#define OCD_NXCFG_NXDWT_BIT		23
+#define OCD_NXCFG_NXDRT_BIT		24
+#define OCD_NXCFG_NXDTC_START		25
+#define OCD_NXCFG_NXDTC_SIZE		3
+#define OCD_NXCFG_NXDMA_BIT		28
+
+/* Bits in DINST */
+#define OCD_DINST_DINST_START		0
+#define OCD_DINST_DINST_SIZE		32
+
+/* Bits in CPUCM */
+#define OCD_CPUCM_BEM_BIT		1
+#define OCD_CPUCM_FEM_BIT		2
+#define OCD_CPUCM_REM_BIT		3
+#define OCD_CPUCM_IBEM_BIT		4
+#define OCD_CPUCM_IEEM_BIT		5
+
+/* Bits in DCCPU */
+#define OCD_DCCPU_DATA_START		0
+#define OCD_DCCPU_DATA_SIZE		32
+
+/* Bits in DCEMU */
+#define OCD_DCEMU_DATA_START		0
+#define OCD_DCEMU_DATA_SIZE		32
+
+/* Bits in DCSR */
+#define OCD_DCSR_CPUD_BIT		0
+#define OCD_DCSR_EMUD_BIT		1
+
+/* Bits in PID */
+#define OCD_PID_PROCESS_START		0
+#define OCD_PID_PROCESS_SIZE		32
+
+/* Bits in EPC0 */
+#define OCD_EPC0_RNG_START		0
+#define OCD_EPC0_RNG_SIZE		2
+#define OCD_EPC0_CE_BIT			4
+#define OCD_EPC0_ECNT_START		16
+#define OCD_EPC0_ECNT_SIZE		16
+
+/* Bits in EPC1 */
+#define OCD_EPC1_RNG_START		0
+#define OCD_EPC1_RNG_SIZE		2
+#define OCD_EPC1_ATB_BIT		5
+#define OCD_EPC1_AM_BIT			6
+
+/* Bits in EPC2 */
+#define OCD_EPC2_RNG_START		0
+#define OCD_EPC2_RNG_SIZE		2
+#define OCD_EPC2_DB_START		2
+#define OCD_EPC2_DB_SIZE		2
+
+/* Bits in EPC3 */
+#define OCD_EPC3_RNG_START		0
+#define OCD_EPC3_RNG_SIZE		2
+#define OCD_EPC3_DWE_BIT		2
+
+/* Bits in AXC */
+#define OCD_AXC_DIV_START		0
+#define OCD_AXC_DIV_SIZE		4
+#define OCD_AXC_AXE_BIT			8
+#define OCD_AXC_AXS_BIT			9
+#define OCD_AXC_DDR_BIT			10
+#define OCD_AXC_LS_BIT			11
+#define OCD_AXC_REX_BIT			12
+#define OCD_AXC_REXTEN_BIT		13
+
+/* Constants for DC:EIC */
+#define OCD_EIC_PROGRAM_AND_DATA_TRACE	0
+#define OCD_EIC_BREAKPOINT		1
+#define OCD_EIC_NOP			2
+
+/* Constants for DC:OVC */
+#define OCD_OVC_OVERRUN			0
+#define OCD_OVC_DELAY_CPU_BTM		1
+#define OCD_OVC_DELAY_CPU_DTM		2
+#define OCD_OVC_DELAY_CPU_BTM_DTM	3
+
+/* Constants for DC:EOS */
+#define OCD_EOS_NOP			0
+#define OCD_EOS_DEBUG_MODE		1
+#define OCD_EOS_BREAKPOINT_WATCHPOINT	2
+#define OCD_EOS_THQ			3
+
+/* Constants for RWCS:NTBC */
+#define OCD_NTBC_OVERWRITE		0
+#define OCD_NTBC_DISABLE		1
+#define OCD_NTBC_BREAKPOINT		2
+
+/* Constants for RWCS:CCTRL */
+#define OCD_CCTRL_AUTO			0
+#define OCD_CCTRL_CACHED		1
+#define OCD_CCTRL_UNCACHED		2
+
+/* Constants for RWCS:SZ */
+#define OCD_SZ_BYTE			0
+#define OCD_SZ_HALFWORD			1
+#define OCD_SZ_WORD			2
+
+/* Constants for WT:PTS */
+#define OCD_PTS_DISABLED		0
+#define OCD_PTS_PROGRAM_0B		1
+#define OCD_PTS_PROGRAM_1A		2
+#define OCD_PTS_PROGRAM_1B		3
+#define OCD_PTS_PROGRAM_2A		4
+#define OCD_PTS_PROGRAM_2B		5
+#define OCD_PTS_DATA_3A			6
+#define OCD_PTS_DATA_3B			7
+
+/* Constants for DTC:RWT1 */
+#define OCD_RWT1_NO_TRACE		0
+#define OCD_RWT1_DATA_READ		1
+#define OCD_RWT1_DATA_WRITE		2
+#define OCD_RWT1_DATA_READ_WRITE	3
+
+/* Constants for DTC:RWT0 */
+#define OCD_RWT0_NO_TRACE		0
+#define OCD_RWT0_DATA_READ		1
+#define OCD_RWT0_DATA_WRITE		2
+#define OCD_RWT0_DATA_READ_WRITE	3
+
+/* Constants for BWC0A:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC0B:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC1A:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC1B:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC2A:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC2B:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC3A:SIZE */
+#define OCD_SIZE_BYTE_ACCESS		4
+#define OCD_SIZE_HALFWORD_ACCESS	5
+#define OCD_SIZE_WORD_ACCESS		6
+#define OCD_SIZE_DOUBLE_WORD_ACCESS	7
+
+/* Constants for BWC3A:BRW */
+#define OCD_BRW_READ_BREAK		0
+#define OCD_BRW_WRITE_BREAK		1
+#define OCD_BRW_ANY_ACCES_BREAK		2
+
+/* Constants for BWC3A:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC3B:SIZE */
+#define OCD_SIZE_BYTE_ACCESS		4
+#define OCD_SIZE_HALFWORD_ACCESS	5
+#define OCD_SIZE_WORD_ACCESS		6
+#define OCD_SIZE_DOUBLE_WORD_ACCESS	7
+
+/* Constants for BWC3B:BRW */
+#define OCD_BRW_READ_BREAK		0
+#define OCD_BRW_WRITE_BREAK		1
+#define OCD_BRW_ANY_ACCES_BREAK		2
+
+/* Constants for BWC3B:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for EPC0:RNG */
+#define OCD_RNG_DISABLED		0
+#define OCD_RNG_EXCLUSIVE		1
+#define OCD_RNG_INCLUSIVE		2
+
+/* Constants for EPC1:RNG */
+#define OCD_RNG_DISABLED		0
+#define OCD_RNG_EXCLUSIVE		1
+#define OCD_RNG_INCLUSIVE		2
+
+/* Constants for EPC2:RNG */
+#define OCD_RNG_DISABLED		0
+#define OCD_RNG_EXCLUSIVE		1
+#define OCD_RNG_INCLUSIVE		2
+
+/* Constants for EPC2:DB */
+#define OCD_DB_DISABLED			0
+#define OCD_DB_CHAINED_B		1
+#define OCD_DB_CHAINED_A		2
+#define OCD_DB_AHAINED_A_AND_B		3
+
+/* Constants for EPC3:RNG */
+#define OCD_RNG_DISABLED		0
+#define OCD_RNG_EXCLUSIVE		1
+#define OCD_RNG_INCLUSIVE		2
+
+#ifndef __ASSEMBLER__
+
+/* Register access macros */
+static inline unsigned long __ocd_read(unsigned int reg)
+{
+	return __builtin_mfdr(reg);
+}
+
+static inline void __ocd_write(unsigned int reg, unsigned long value)
+{
+	__builtin_mtdr(reg, value);
+}
+
+#define ocd_read(reg)			__ocd_read(OCD_##reg)
+#define ocd_write(reg, value)		__ocd_write(OCD_##reg, value)
+
+struct task_struct;
+
+void ocd_enable(struct task_struct *child);
+void ocd_disable(struct task_struct *child);
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __ASM_AVR32_OCD_H */
diff --git a/arch/avr32/include/asm/page.h b/arch/avr32/include/asm/page.h
new file mode 100644
index 00000000000..f805d1cb11b
--- /dev/null
+++ b/arch/avr32/include/asm/page.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PAGE_H
+#define __ASM_AVR32_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PTE_MASK	PAGE_MASK
+
+#ifndef __ASSEMBLY__
+
+#include <asm/addrspace.h>
+
+extern void clear_page(void *to);
+extern void copy_page(void *to, void *from);
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)		((x).pte)
+#define pgd_val(x)		((x).pgd)
+#define pgprot_val(x)		((x).pgprot)
+
+#define __pte(x)		((pte_t) { (x) })
+#define __pgd(x)		((pgd_t) { (x) })
+#define __pgprot(x)		((pgprot_t) { (x) })
+
+/* FIXME: These should be removed soon */
+extern unsigned long memory_start, memory_end;
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+	unsigned lz;
+
+	size = (size - 1) >> PAGE_SHIFT;
+	asm("clz %0, %1" : "=r"(lz) : "r"(size));
+	return 32 - lz;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The hardware maps the virtual addresses 0x80000000 -> 0x9fffffff
+ * permanently to the physical addresses 0x00000000 -> 0x1fffffff when
+ * segmentation is enabled. We want to make use of this in order to
+ * minimize TLB pressure.
+ */
+#define PAGE_OFFSET		(0x80000000UL)
+
+/*
+ * ALSA uses virt_to_page() on DMA pages, which I'm not entirely sure
+ * is a good idea. Anyway, we can't simply subtract PAGE_OFFSET here
+ * in that case, so we'll have to mask out the three most significant
+ * bits of the address instead...
+ *
+ * What's the difference between __pa() and virt_to_phys() anyway?
+ */
+#define __pa(x)		PHYSADDR(x)
+#define __va(x)		((void *)(P1SEGADDR(x)))
+
+#define MAP_NR(addr)	(((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
+
+#define phys_to_page(phys)	(pfn_to_page(phys >> PAGE_SHIFT))
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+
+#define PHYS_PFN_OFFSET		(CONFIG_PHYS_OFFSET >> PAGE_SHIFT)
+
+#define pfn_to_page(pfn)	(mem_map + ((pfn) - PHYS_PFN_OFFSET))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + PHYS_PFN_OFFSET)
+#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE |	\
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#define HIGHMEM_START		0x20000000UL
+
+#endif /* __ASM_AVR32_PAGE_H */
diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h
new file mode 100644
index 00000000000..34bc8d4c3b2
--- /dev/null
+++ b/arch/avr32/include/asm/param.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_AVR32_PARAM_H
+#define __ASM_AVR32_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif
+
+#ifndef HZ
+# define HZ		100
+#endif
+
+/* TODO: Should be configurable */
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+# define NOGROUP	(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64
+
+#endif /* __ASM_AVR32_PARAM_H */
diff --git a/arch/avr32/include/asm/pci.h b/arch/avr32/include/asm/pci.h
new file mode 100644
index 00000000000..a32a0237201
--- /dev/null
+++ b/arch/avr32/include/asm/pci.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_AVR32_PCI_H__
+#define __ASM_AVR32_PCI_H__
+
+/* We don't support PCI yet, but some drivers require this file anyway */
+
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#include <asm-generic/pci-dma-compat.h>
+
+#endif /* __ASM_AVR32_PCI_H__ */
diff --git a/arch/avr32/include/asm/percpu.h b/arch/avr32/include/asm/percpu.h
new file mode 100644
index 00000000000..69227b4cd0d
--- /dev/null
+++ b/arch/avr32/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_PERCPU_H
+#define __ASM_AVR32_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_AVR32_PERCPU_H */
diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
new file mode 100644
index 00000000000..64082132394
--- /dev/null
+++ b/arch/avr32/include/asm/pgalloc.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PGALLOC_H
+#define __ASM_AVR32_PGALLOC_H
+
+#include <linux/quicklist.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#define QUICK_PGD	0	/* Preserve kernel mappings over free */
+#define QUICK_PT	1	/* Zero on free */
+
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+				       pmd_t *pmd, pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				    pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void pgd_ctor(void *x)
+{
+	pgd_t *pgd = x;
+
+	memcpy(pgd + USER_PTRS_PER_PGD,
+		swapper_pg_dir + USER_PTRS_PER_PGD,
+		(PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
+/*
+ * Allocate and free page tables
+ */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(QUICK_PGD, NULL, pgd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					 unsigned long address)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+	if (!pg)
+		return NULL;
+
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(QUICK_PT, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	quicklist_free_page(QUICK_PT, NULL, pte);
+}
+
+#define __pte_free_tlb(tlb,pte)				\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), pte);			\
+} while (0)
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(QUICK_PGD, NULL, 25, 16);
+	quicklist_trim(QUICK_PT, NULL, 25, 16);
+}
+
+#endif /* __ASM_AVR32_PGALLOC_H */
diff --git a/arch/avr32/include/asm/pgtable-2level.h b/arch/avr32/include/asm/pgtable-2level.h
new file mode 100644
index 00000000000..425dd567b5b
--- /dev/null
+++ b/arch/avr32/include/asm/pgtable-2level.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PGTABLE_2LEVEL_H
+#define __ASM_AVR32_PGTABLE_2LEVEL_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/*
+ * Traditional 2-level paging structure
+ */
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+
+#define PTRS_PER_PTE	1024
+
+#ifndef __ASSEMBLY__
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep, pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define pte_pfn(x)		((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PGTABLE_2LEVEL_H */
diff --git a/arch/avr32/include/asm/pgtable.h b/arch/avr32/include/asm/pgtable.h
new file mode 100644
index 00000000000..fecdda16f44
--- /dev/null
+++ b/arch/avr32/include/asm/pgtable.h
@@ -0,0 +1,377 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PGTABLE_H
+#define __ASM_AVR32_PGTABLE_H
+
+#include <asm/addrspace.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Use two-level page tables just as the i386 (without PAE)
+ */
+#include <asm/pgtable-2level.h>
+
+/*
+ * The following code might need some cleanup when the values are
+ * final...
+ */
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init(void);
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used for
+ * zero-mapped memory areas etc.
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr) (empty_zero_page)
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8 MiB value just means that there will be a 8 MiB "hole"
+ * after the uncached physical memory (P2 segment) until the vmalloc
+ * area starts. That means that any out-of-bounds memory accesses will
+ * hopefully be caught; we don't know if the end of the P1/P2 segments
+ * are actually used for anything, but it is anyway safer to let the
+ * MMU catch these kinds of errors than to rely on the memory bus.
+ *
+ * A "hole" of the same size is added to the end of the P3 segment as
+ * well. It might seem wasteful to use 16 MiB of virtual address space
+ * on this, but we do have 512 MiB of it...
+ *
+ * The vmalloc() routines leave a hole of 4 KiB between each vmalloced
+ * area for the same reason.
+ */
+#define VMALLOC_OFFSET	(8 * 1024 * 1024)
+#define VMALLOC_START	(P3SEG + VMALLOC_OFFSET)
+#define VMALLOC_END	(P4SEG - VMALLOC_OFFSET)
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Page flags. Some of these flags are not directly supported by
+ * hardware, so we have to emulate them.
+ */
+#define _TLBEHI_BIT_VALID	9
+#define _TLBEHI_VALID		(1 << _TLBEHI_BIT_VALID)
+
+#define _PAGE_BIT_WT		0  /* W-bit   : write-through */
+#define _PAGE_BIT_DIRTY		1  /* D-bit   : page changed */
+#define _PAGE_BIT_SZ0		2  /* SZ0-bit : Size of page */
+#define _PAGE_BIT_SZ1		3  /* SZ1-bit : Size of page */
+#define _PAGE_BIT_EXECUTE	4  /* X-bit   : execute access allowed */
+#define _PAGE_BIT_RW		5  /* AP0-bit : write access allowed */
+#define _PAGE_BIT_USER		6  /* AP1-bit : user space access allowed */
+#define _PAGE_BIT_BUFFER	7  /* B-bit   : bufferable */
+#define _PAGE_BIT_GLOBAL	8  /* G-bit   : global (ignore ASID) */
+#define _PAGE_BIT_CACHABLE	9  /* C-bit   : cachable */
+
+/* If we drop support for 1K pages, we get two extra bits */
+#define _PAGE_BIT_PRESENT	10
+#define _PAGE_BIT_ACCESSED	11 /* software: page was accessed */
+
+/* The following flags are only valid when !PRESENT */
+#define _PAGE_BIT_FILE		0 /* software: pagecache or swap? */
+
+#define _PAGE_WT		(1 << _PAGE_BIT_WT)
+#define _PAGE_DIRTY		(1 << _PAGE_BIT_DIRTY)
+#define _PAGE_EXECUTE		(1 << _PAGE_BIT_EXECUTE)
+#define _PAGE_RW		(1 << _PAGE_BIT_RW)
+#define _PAGE_USER		(1 << _PAGE_BIT_USER)
+#define _PAGE_BUFFER		(1 << _PAGE_BIT_BUFFER)
+#define _PAGE_GLOBAL		(1 << _PAGE_BIT_GLOBAL)
+#define _PAGE_CACHABLE		(1 << _PAGE_BIT_CACHABLE)
+
+/* Software flags */
+#define _PAGE_ACCESSED		(1 << _PAGE_BIT_ACCESSED)
+#define _PAGE_PRESENT		(1 << _PAGE_BIT_PRESENT)
+#define _PAGE_FILE		(1 << _PAGE_BIT_FILE)
+
+/*
+ * Page types, i.e. sizes. _PAGE_TYPE_NONE corresponds to what is
+ * usually called _PAGE_PROTNONE on other architectures.
+ *
+ * XXX: Find out if _PAGE_PROTNONE is equivalent with !_PAGE_USER. If
+ * so, we can encode all possible page sizes (although we can't really
+ * support 1K pages anyway due to the _PAGE_PRESENT and _PAGE_ACCESSED
+ * bits)
+ *
+ */
+#define _PAGE_TYPE_MASK		((1 << _PAGE_BIT_SZ0) | (1 << _PAGE_BIT_SZ1))
+#define _PAGE_TYPE_NONE		(0 << _PAGE_BIT_SZ0)
+#define _PAGE_TYPE_SMALL	(1 << _PAGE_BIT_SZ0)
+#define _PAGE_TYPE_MEDIUM	(2 << _PAGE_BIT_SZ0)
+#define _PAGE_TYPE_LARGE	(3 << _PAGE_BIT_SZ0)
+
+/*
+ * Mask which drop software flags. We currently can't handle more than
+ * 512 MiB of physical memory, so we can use bits 29-31 for other
+ * stuff.  With a fixed 4K page size, we can use bits 10-11 as well as
+ * bits 2-3 (SZ)
+ */
+#define _PAGE_FLAGS_HARDWARE_MASK	0xfffff3ff
+
+#define _PAGE_FLAGS_CACHE_MASK	(_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
+
+/* Flags that may be modified by software */
+#define _PAGE_CHG_MASK		(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
+				 | _PAGE_FLAGS_CACHE_MASK)
+
+#define _PAGE_FLAGS_READ	(_PAGE_CACHABLE	| _PAGE_BUFFER)
+#define _PAGE_FLAGS_WRITE	(_PAGE_FLAGS_READ | _PAGE_RW | _PAGE_DIRTY)
+
+#define _PAGE_NORMAL(x)	__pgprot((x) | _PAGE_PRESENT | _PAGE_TYPE_SMALL	\
+				 | _PAGE_ACCESSED)
+
+#define PAGE_NONE	(_PAGE_ACCESSED | _PAGE_TYPE_NONE)
+#define PAGE_READ	(_PAGE_FLAGS_READ | _PAGE_USER)
+#define PAGE_EXEC	(_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_USER)
+#define PAGE_WRITE	(_PAGE_FLAGS_WRITE | _PAGE_USER)
+#define PAGE_KERNEL	_PAGE_NORMAL(_PAGE_FLAGS_WRITE | _PAGE_EXECUTE | _PAGE_GLOBAL)
+#define PAGE_KERNEL_RO	_PAGE_NORMAL(_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_GLOBAL)
+
+#define _PAGE_P(x)	_PAGE_NORMAL((x) & ~(_PAGE_RW | _PAGE_DIRTY))
+#define _PAGE_S(x)	_PAGE_NORMAL(x)
+
+#define PAGE_COPY	_PAGE_P(PAGE_WRITE | PAGE_READ)
+#define PAGE_SHARED	_PAGE_S(PAGE_WRITE | PAGE_READ)
+
+#ifndef __ASSEMBLY__
+/*
+ * The hardware supports flags for write- and execute access. Read is
+ * always allowed if the page is loaded into the TLB, so the "-w-",
+ * "--x" and "-wx" mappings are implemented as "rw-", "r-x" and "rwx",
+ * respectively.
+ *
+ * The "---" case is handled by software; the page will simply not be
+ * loaded into the TLB if the page type is _PAGE_TYPE_NONE.
+ */
+
+#define __P000	__pgprot(PAGE_NONE)
+#define __P001	_PAGE_P(PAGE_READ)
+#define __P010	_PAGE_P(PAGE_WRITE)
+#define __P011	_PAGE_P(PAGE_WRITE | PAGE_READ)
+#define __P100	_PAGE_P(PAGE_EXEC)
+#define __P101	_PAGE_P(PAGE_EXEC | PAGE_READ)
+#define __P110	_PAGE_P(PAGE_EXEC | PAGE_WRITE)
+#define __P111	_PAGE_P(PAGE_EXEC | PAGE_WRITE | PAGE_READ)
+
+#define __S000	__pgprot(PAGE_NONE)
+#define __S001	_PAGE_S(PAGE_READ)
+#define __S010	_PAGE_S(PAGE_WRITE)
+#define __S011	_PAGE_S(PAGE_WRITE | PAGE_READ)
+#define __S100	_PAGE_S(PAGE_EXEC)
+#define __S101	_PAGE_S(PAGE_EXEC | PAGE_READ)
+#define __S110	_PAGE_S(PAGE_EXEC | PAGE_WRITE)
+#define __S111	_PAGE_S(PAGE_EXEC | PAGE_WRITE | PAGE_READ)
+
+#define pte_none(x)	(!pte_val(x))
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+
+#define pte_clear(mm,addr,xp)					\
+	do {							\
+		set_pte_at(mm, addr, xp, __pte(0));		\
+	} while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_RW;
+}
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_DIRTY;
+}
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_ACCESSED;
+}
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_FILE;
+}
+
+/* Mutator functions for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW));
+	return pte;
+}
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY));
+	return pte;
+}
+static inline pte_t pte_mkold(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED));
+	return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW));
+	return pte;
+}
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY));
+	return pte;
+}
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED));
+	return pte;
+}
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return pte;
+}
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x))
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	set_pmd(pmdp, __pmd(0));
+}
+
+#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
+
+/*
+ * Permanent address of a page. We don't support highmem, so this is
+ * trivial.
+ */
+#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
+#define pte_page(x)	(pfn_to_page(pte_pfn(x)))
+
+/*
+ * Mark the prot value as uncacheable and unbufferable
+ */
+#define pgprot_noncached(prot)						\
+	__pgprot(pgprot_val(prot) & ~(_PAGE_BUFFER | _PAGE_CACHABLE))
+
+/*
+ * Mark the prot value as uncacheable but bufferable
+ */
+#define pgprot_writecombine(prot)					\
+	__pgprot((pgprot_val(prot) & ~_PAGE_CACHABLE) | _PAGE_BUFFER)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK)
+			    | pgprot_val(newprot)));
+	return pte;
+}
+
+#define page_pte(page)	page_pte_prot(page, __pgprot(0))
+
+#define pmd_page_vaddr(pmd)	pmd_val(pmd)
+#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT)	\
+				 & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)				\
+	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_kernel(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address)
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct * vma,
+			     unsigned long address, pte_t pte);
+
+/*
+ * Encode and decode a swap entry
+ *
+ * Constraints:
+ *   _PAGE_FILE at bit 0
+ *   _PAGE_TYPE_* at bits 2-3 (for emulating _PAGE_PROTNONE)
+ *   _PAGE_PRESENT at bit 10
+ *
+ * We encode the type into bits 4-9 and offset into bits 11-31. This
+ * gives us a 21 bits offset, or 2**21 * 4K = 8G usable swap space per
+ * device, and 64 possible types.
+ *
+ * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
+ *       and _PAGE_PROTNONE bits
+ */
+#define __swp_type(x)		(((x).val >> 4) & 0x3f)
+#define __swp_offset(x)		((x).val >> 11)
+#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 11) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+/*
+ * Encode and decode a nonlinear file mapping entry. We have to
+ * preserve _PAGE_FILE and _PAGE_PRESENT here. _PAGE_TYPE_* isn't
+ * necessary, since _PAGE_FILE implies !_PAGE_PROTNONE (?)
+ */
+#define PTE_FILE_MAX_BITS	30
+#define pte_to_pgoff(pte)	(((pte_val(pte) >> 1) & 0x1ff)		\
+				 | ((pte_val(pte) >> 11) << 9))
+#define pgoff_to_pte(off)	((pte_t) { ((((off) & 0x1ff) << 1)	\
+					    | (((off) >> 9) << 11)	\
+					    | _PAGE_FILE) })
+
+typedef pte_t *pte_addr_t;
+
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/* No page table caches to initialize (?) */
+#define pgtable_cache_init()	do { } while(0)
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PGTABLE_H */
diff --git a/arch/avr32/include/asm/poll.h b/arch/avr32/include/asm/poll.h
new file mode 100644
index 00000000000..c98509d3149
--- /dev/null
+++ b/arch/avr32/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/avr32/include/asm/posix_types.h b/arch/avr32/include/asm/posix_types.h
new file mode 100644
index 00000000000..fe0c0c01438
--- /dev/null
+++ b/arch/avr32/include/asm/posix_types.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_POSIX_TYPES_H
+#define __ASM_AVR32_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int             __kernel_timer_t;
+typedef int             __kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short  __kernel_uid16_t;
+typedef unsigned short  __kernel_gid16_t;
+typedef unsigned int    __kernel_uid32_t;
+typedef unsigned int    __kernel_gid32_t;
+
+typedef unsigned short  __kernel_old_uid_t;
+typedef unsigned short  __kernel_old_gid_t;
+typedef unsigned short  __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+typedef struct {
+    int     val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef  __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+    unsigned long __tmp = __fd / __NFDBITS;
+    unsigned long __rem = __fd % __NFDBITS;
+    __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef  __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+    unsigned long __tmp = __fd / __NFDBITS;
+    unsigned long __rem = __fd % __NFDBITS;
+    __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef  __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+    unsigned long __tmp = __fd / __NFDBITS;
+    unsigned long __rem = __fd % __NFDBITS;
+    return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef  __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+    unsigned long *__tmp = __p->fds_bits;
+    int __i;
+
+    if (__builtin_constant_p(__FDSET_LONGS)) {
+        switch (__FDSET_LONGS) {
+            case 16:
+                __tmp[ 0] = 0; __tmp[ 1] = 0;
+                __tmp[ 2] = 0; __tmp[ 3] = 0;
+                __tmp[ 4] = 0; __tmp[ 5] = 0;
+                __tmp[ 6] = 0; __tmp[ 7] = 0;
+                __tmp[ 8] = 0; __tmp[ 9] = 0;
+                __tmp[10] = 0; __tmp[11] = 0;
+                __tmp[12] = 0; __tmp[13] = 0;
+                __tmp[14] = 0; __tmp[15] = 0;
+                return;
+
+            case 8:
+                __tmp[ 0] = 0; __tmp[ 1] = 0;
+                __tmp[ 2] = 0; __tmp[ 3] = 0;
+                __tmp[ 4] = 0; __tmp[ 5] = 0;
+                __tmp[ 6] = 0; __tmp[ 7] = 0;
+                return;
+
+            case 4:
+                __tmp[ 0] = 0; __tmp[ 1] = 0;
+                __tmp[ 2] = 0; __tmp[ 3] = 0;
+                return;
+        }
+    }
+    __i = __FDSET_LONGS;
+    while (__i) {
+        __i--;
+        *__tmp = 0;
+        __tmp++;
+    }
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* __ASM_AVR32_POSIX_TYPES_H */
diff --git a/arch/avr32/include/asm/processor.h b/arch/avr32/include/asm/processor.h
new file mode 100644
index 00000000000..49a88f5a9d2
--- /dev/null
+++ b/arch/avr32/include/asm/processor.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PROCESSOR_H
+#define __ASM_AVR32_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define TASK_SIZE	0x80000000
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+#endif
+
+#ifndef __ASSEMBLY__
+
+static inline void *current_text_addr(void)
+{
+	register void *pc asm("pc");
+	return pc;
+}
+
+enum arch_type {
+	ARCH_AVR32A,
+	ARCH_AVR32B,
+	ARCH_MAX
+};
+
+enum cpu_type {
+	CPU_MORGAN,
+	CPU_AT32AP,
+	CPU_MAX
+};
+
+enum tlb_config {
+	TLB_NONE,
+	TLB_SPLIT,
+	TLB_UNIFIED,
+	TLB_INVALID
+};
+
+#define AVR32_FEATURE_RMW	(1 << 0)
+#define AVR32_FEATURE_DSP	(1 << 1)
+#define AVR32_FEATURE_SIMD	(1 << 2)
+#define AVR32_FEATURE_OCD	(1 << 3)
+#define AVR32_FEATURE_PCTR	(1 << 4)
+#define AVR32_FEATURE_JAVA	(1 << 5)
+#define AVR32_FEATURE_FPU	(1 << 6)
+
+struct avr32_cpuinfo {
+	struct clk *clk;
+	unsigned long loops_per_jiffy;
+	enum arch_type arch_type;
+	enum cpu_type cpu_type;
+	unsigned short arch_revision;
+	unsigned short cpu_revision;
+	enum tlb_config tlb_config;
+	unsigned long features;
+	u32 device_id;
+
+	struct cache_info icache;
+	struct cache_info dcache;
+};
+
+static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 1) & 0x7f;
+}
+static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 12) & 0xffff;
+}
+static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 28) & 0x0f;
+}
+
+extern struct avr32_cpuinfo boot_cpu_data;
+
+#ifdef CONFIG_SMP
+extern struct avr32_cpuinfo cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's
+ */
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+
+#define cpu_relax()		barrier()
+#define cpu_sync_pipeline()	asm volatile("sub pc, -2" : : : "memory")
+
+struct cpu_context {
+	unsigned long sr;
+	unsigned long pc;
+	unsigned long ksp;	/* Kernel stack pointer */
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+};
+
+/* This struct contains the CPU context as stored by switch_to() */
+struct thread_struct {
+	struct cpu_context cpu_context;
+	unsigned long single_step_addr;
+	u16 single_step_insn;
+};
+
+#define INIT_THREAD {						\
+	.cpu_context = {					\
+		.ksp = sizeof(init_stack) + (long)&init_stack,	\
+	},							\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp)	 \
+	do {					 \
+		set_fs(USER_DS);		 \
+		memset(regs, 0, sizeof(*regs));	 \
+		regs->sr = MODE_USER;		 \
+		regs->pc = new_pc & ~1;		 \
+		regs->sp = new_sp;		 \
+	} while(0)
+
+struct task_struct;
+
+/* Free all resources held by a thread */
+extern void release_thread(struct task_struct *);
+
+/* Create a kernel thread without removing it from tasklists */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while(0)
+
+/* Return saved PC of a blocked thread */
+#define thread_saved_pc(tsk)    ((tsk)->thread.cpu_context.pc)
+
+struct pt_regs;
+extern unsigned long get_wchan(struct task_struct *p);
+extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl);
+extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
+			       struct pt_regs *regs, const char *log_lvl);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk)	((tsk)->thread.cpu_context.pc)
+#define KSTK_ESP(tsk)	((tsk)->thread.cpu_context.ksp)
+
+#define ARCH_HAS_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	const char *c = x;
+	asm volatile("pref %0" : : "r"(c));
+}
+#define PREFETCH_STRIDE	L1_CACHE_BYTES
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PROCESSOR_H */
diff --git a/arch/avr32/include/asm/ptrace.h b/arch/avr32/include/asm/ptrace.h
new file mode 100644
index 00000000000..9e2d44f4e0f
--- /dev/null
+++ b/arch/avr32/include/asm/ptrace.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PTRACE_H
+#define __ASM_AVR32_PTRACE_H
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+
+/*
+ * Status Register bits
+ */
+#define SR_H		0x20000000
+#define SR_J		0x10000000
+#define SR_DM		0x08000000
+#define SR_D		0x04000000
+#define MODE_NMI	0x01c00000
+#define MODE_EXCEPTION	0x01800000
+#define MODE_INT3	0x01400000
+#define MODE_INT2	0x01000000
+#define MODE_INT1	0x00c00000
+#define MODE_INT0	0x00800000
+#define MODE_SUPERVISOR	0x00400000
+#define MODE_USER	0x00000000
+#define MODE_MASK	0x01c00000
+#define SR_EM		0x00200000
+#define SR_I3M		0x00100000
+#define SR_I2M		0x00080000
+#define SR_I1M		0x00040000
+#define SR_I0M		0x00020000
+#define SR_GM		0x00010000
+
+#define SR_H_BIT	29
+#define SR_J_BIT	28
+#define SR_DM_BIT	27
+#define SR_D_BIT	26
+#define MODE_SHIFT	22
+#define SR_EM_BIT	21
+#define SR_I3M_BIT	20
+#define SR_I2M_BIT	19
+#define SR_I1M_BIT	18
+#define SR_I0M_BIT	17
+#define SR_GM_BIT	16
+
+/* The user-visible part */
+#define SR_L		0x00000020
+#define SR_Q		0x00000010
+#define SR_V		0x00000008
+#define SR_N		0x00000004
+#define SR_Z		0x00000002
+#define SR_C		0x00000001
+
+#define SR_L_BIT	5
+#define SR_Q_BIT	4
+#define SR_V_BIT	3
+#define SR_N_BIT	2
+#define SR_Z_BIT	1
+#define SR_C_BIT	0
+
+/*
+ * The order is defined by the stmts instruction. r0 is stored first,
+ * so it gets the highest address.
+ *
+ * Registers 0-12 are general-purpose registers (r12 is normally used for
+ * the function return value).
+ * Register 13 is the stack pointer
+ * Register 14 is the link register
+ * Register 15 is the program counter (retrieved from the RAR sysreg)
+ */
+#define FRAME_SIZE_FULL 72
+#define REG_R12_ORIG	68
+#define REG_R0		64
+#define REG_R1		60
+#define REG_R2		56
+#define REG_R3		52
+#define REG_R4		48
+#define REG_R5		44
+#define REG_R6		40
+#define REG_R7		36
+#define REG_R8		32
+#define REG_R9		28
+#define REG_R10		24
+#define REG_R11		20
+#define REG_R12		16
+#define REG_SP		12
+#define REG_LR		 8
+
+#define FRAME_SIZE_MIN	 8
+#define REG_PC		 4
+#define REG_SR		 0
+
+#ifndef __ASSEMBLY__
+struct pt_regs {
+	/* These are always saved */
+	unsigned long sr;
+	unsigned long pc;
+
+	/* These are sometimes saved */
+	unsigned long lr;
+	unsigned long sp;
+	unsigned long r12;
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+
+	/* Only saved on system call */
+	unsigned long r12_orig;
+};
+
+#ifdef __KERNEL__
+
+#include <asm/ocd.h>
+
+#define arch_ptrace_attach(child)       ocd_enable(child)
+
+#define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
+#define instruction_pointer(regs)       ((regs)->pc)
+#define profile_pc(regs)                instruction_pointer(regs)
+
+extern void show_regs (struct pt_regs *);
+
+static __inline__ int valid_user_regs(struct pt_regs *regs)
+{
+	/*
+	 * Some of the Java bits might be acceptable if/when we
+	 * implement some support for that stuff...
+	 */
+	if ((regs->sr & 0xffff0000) == 0)
+		return 1;
+
+	/*
+	 * Force status register flags to be sane and report this
+	 * illegal behaviour...
+	 */
+	regs->sr &= 0x0000ffff;
+	return 0;
+}
+
+
+#endif /* __KERNEL__ */
+
+#endif /* ! __ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PTRACE_H */
diff --git a/arch/avr32/include/asm/resource.h b/arch/avr32/include/asm/resource.h
new file mode 100644
index 00000000000..c6dd101472b
--- /dev/null
+++ b/arch/avr32/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_RESOURCE_H
+#define __ASM_AVR32_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* __ASM_AVR32_RESOURCE_H */
diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
new file mode 100644
index 00000000000..377320e3bd1
--- /dev/null
+++ b/arch/avr32/include/asm/scatterlist.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_AVR32_SCATTERLIST_H
+#define __ASM_AVR32_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+   unsigned long	sg_magic;
+#endif
+    unsigned long	page_link;
+    unsigned int	offset;
+    dma_addr_t		dma_address;
+    unsigned int	length;
+};
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* __ASM_AVR32_SCATTERLIST_H */
diff --git a/arch/avr32/include/asm/sections.h b/arch/avr32/include/asm/sections.h
new file mode 100644
index 00000000000..aa14252e418
--- /dev/null
+++ b/arch/avr32/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_SECTIONS_H
+#define __ASM_AVR32_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* __ASM_AVR32_SECTIONS_H */
diff --git a/arch/avr32/include/asm/sembuf.h b/arch/avr32/include/asm/sembuf.h
new file mode 100644
index 00000000000..e472216e0c9
--- /dev/null
+++ b/arch/avr32/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_AVR32_SEMBUF_H
+#define __ASM_AVR32_SEMBUF_H
+
+/*
+* The semid64_ds structure for AVR32 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+        struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
+        __kernel_time_t sem_otime;              /* last semop time */
+        unsigned long   __unused1;
+        __kernel_time_t sem_ctime;              /* last change time */
+        unsigned long   __unused2;
+        unsigned long   sem_nsems;              /* no. of semaphores in array */
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#endif /* __ASM_AVR32_SEMBUF_H */
diff --git a/arch/avr32/include/asm/serial.h b/arch/avr32/include/asm/serial.h
new file mode 100644
index 00000000000..5ecaebc22b0
--- /dev/null
+++ b/arch/avr32/include/asm/serial.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/avr32/include/asm/setup.h b/arch/avr32/include/asm/setup.h
new file mode 100644
index 00000000000..ff5b7cf6be4
--- /dev/null
+++ b/arch/avr32/include/asm/setup.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * Based on linux/include/asm-arm/setup.h
+ *   Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SETUP_H__
+#define __ASM_AVR32_SETUP_H__
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+
+/* Magic number indicating that a tag table is present */
+#define ATAG_MAGIC	0xa2a25441
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Generic memory range, used by several tags.
+ *
+ *   addr is always physical.
+ *   size is measured in bytes.
+ *   next is for use by the OS, e.g. for grouping regions into
+ *        linked lists.
+ */
+struct tag_mem_range {
+	u32			addr;
+	u32			size;
+	struct tag_mem_range *	next;
+};
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	u32 size;
+	u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	u32 flags;
+	u32 pagesize;
+	u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+/* ATAG_MEM uses tag_mem_range */
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410003
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* Ramdisk image (may be compressed) */
+#define ATAG_RDIMG	0x54410004
+/* ATAG_RDIMG uses tag_mem_range */
+
+/* Information about various clocks present in the system */
+#define ATAG_CLOCK	0x54410005
+
+struct tag_clock {
+	u32	clock_id;	/* Which clock are we talking about? */
+	u32	clock_flags;	/* Special features */
+	u64	clock_hz;	/* Clock speed in Hz */
+};
+
+/* The clock types we know about */
+#define CLOCK_BOOTCPU	0
+
+/* Memory reserved for the system (e.g. the bootloader) */
+#define ATAG_RSVD_MEM	0x54410006
+/* ATAG_RSVD_MEM uses tag_mem_range */
+
+/* Ethernet information */
+
+#define ATAG_ETHERNET	0x54410007
+
+struct tag_ethernet {
+	u8	mac_index;
+	u8	mii_phy_addr;
+	u8	hw_address[6];
+};
+
+#define ETH_INVALID_PHY	0xff
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core core;
+		struct tag_mem_range mem_range;
+		struct tag_cmdline cmdline;
+		struct tag_clock clock;
+		struct tag_ethernet ethernet;
+	} u;
+};
+
+struct tagtable {
+	u32	tag;
+	int	(*parse)(struct tag *);
+};
+
+#define __tag __used __attribute__((__section__(".taglist.init")))
+#define __tagtable(tag, fn)						\
+	static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+#define tag_member_present(tag,member)					\
+	((unsigned long)(&((struct tag *)0L)->member + 1)		\
+	 <= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)						\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+extern struct tag *bootloader_tags;
+
+extern resource_size_t fbmem_start;
+extern resource_size_t fbmem_size;
+
+void setup_processor(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif  /*  __KERNEL__  */
+
+#endif /* __ASM_AVR32_SETUP_H__ */
diff --git a/arch/avr32/include/asm/shmbuf.h b/arch/avr32/include/asm/shmbuf.h
new file mode 100644
index 00000000000..c62fba41739
--- /dev/null
+++ b/arch/avr32/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_AVR32_SHMBUF_H
+#define __ASM_AVR32_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_AVR32_SHMBUF_H */
diff --git a/arch/avr32/include/asm/shmparam.h b/arch/avr32/include/asm/shmparam.h
new file mode 100644
index 00000000000..3681266c77f
--- /dev/null
+++ b/arch/avr32/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_SHMPARAM_H
+#define __ASM_AVR32_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE	/* attach addr a multiple of this */
+
+#endif /* __ASM_AVR32_SHMPARAM_H */
diff --git a/arch/avr32/include/asm/sigcontext.h b/arch/avr32/include/asm/sigcontext.h
new file mode 100644
index 00000000000..e04062b5f39
--- /dev/null
+++ b/arch/avr32/include/asm/sigcontext.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SIGCONTEXT_H
+#define __ASM_AVR32_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long	sr;
+	unsigned long	pc;
+	unsigned long	lr;
+	unsigned long	sp;
+	unsigned long	r12;
+	unsigned long	r11;
+	unsigned long	r10;
+	unsigned long	r9;
+	unsigned long	r8;
+	unsigned long	r7;
+	unsigned long	r6;
+	unsigned long	r5;
+	unsigned long	r4;
+	unsigned long	r3;
+	unsigned long	r2;
+	unsigned long	r1;
+	unsigned long	r0;
+};
+
+#endif /* __ASM_AVR32_SIGCONTEXT_H */
diff --git a/arch/avr32/include/asm/siginfo.h b/arch/avr32/include/asm/siginfo.h
new file mode 100644
index 00000000000..5ee93f40a8a
--- /dev/null
+++ b/arch/avr32/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _AVR32_SIGINFO_H
+#define _AVR32_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h
new file mode 100644
index 00000000000..caffefeeba1
--- /dev/null
+++ b/arch/avr32/include/asm/signal.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SIGNAL_H
+#define __ASM_AVR32_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	(_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_ONSTACK		indicates that a registered stack_t will be used.
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+		__sighandler_t _sa_handler;
+		void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
new file mode 100644
index 00000000000..35863f26092
--- /dev/null
+++ b/arch/avr32/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_AVR32_SOCKET_H
+#define __ASM_AVR32_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/include/asm/sockios.h b/arch/avr32/include/asm/sockios.h
new file mode 100644
index 00000000000..0802d742f97
--- /dev/null
+++ b/arch/avr32/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_AVR32_SOCKIOS_H
+#define __ASM_AVR32_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* __ASM_AVR32_SOCKIOS_H */
diff --git a/arch/avr32/include/asm/stat.h b/arch/avr32/include/asm/stat.h
new file mode 100644
index 00000000000..e72881e1023
--- /dev/null
+++ b/arch/avr32/include/asm/stat.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_STAT_H
+#define __ASM_AVR32_STAT_H
+
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+struct stat {
+        unsigned long st_dev;
+        unsigned long st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned long  st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_blksize;
+        unsigned long  st_blocks;
+        unsigned long  st_atime;
+        unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+        unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+        unsigned long  st_ctime_nsec;
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat64 {
+	unsigned long long st_dev;
+
+	unsigned long long st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long st_rdev;
+
+	long long	st_size;
+	unsigned long	__pad1;		/* align 64-bit st_blocks */
+	unsigned long	st_blksize;
+
+	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* __ASM_AVR32_STAT_H */
diff --git a/arch/avr32/include/asm/statfs.h b/arch/avr32/include/asm/statfs.h
new file mode 100644
index 00000000000..2961bd18c50
--- /dev/null
+++ b/arch/avr32/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_STATFS_H
+#define __ASM_AVR32_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* __ASM_AVR32_STATFS_H */
diff --git a/arch/avr32/include/asm/string.h b/arch/avr32/include/asm/string.h
new file mode 100644
index 00000000000..c91a623cd58
--- /dev/null
+++ b/arch/avr32/include/asm/string.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_STRING_H
+#define __ASM_AVR32_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *b, int c, size_t len);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *to, const void *from, size_t len);
+
+#endif /* __ASM_AVR32_STRING_H */
diff --git a/arch/avr32/include/asm/sysreg.h b/arch/avr32/include/asm/sysreg.h
new file mode 100644
index 00000000000..d4e0950170c
--- /dev/null
+++ b/arch/avr32/include/asm/sysreg.h
@@ -0,0 +1,291 @@
+/*
+ * AVR32 System Registers
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SYSREG_H
+#define __ASM_AVR32_SYSREG_H
+
+/* sysreg register offsets */
+#define SYSREG_SR				0x0000
+#define SYSREG_EVBA				0x0004
+#define SYSREG_ACBA				0x0008
+#define SYSREG_CPUCR				0x000c
+#define SYSREG_ECR				0x0010
+#define SYSREG_RSR_SUP				0x0014
+#define SYSREG_RSR_INT0				0x0018
+#define SYSREG_RSR_INT1				0x001c
+#define SYSREG_RSR_INT2				0x0020
+#define SYSREG_RSR_INT3				0x0024
+#define SYSREG_RSR_EX				0x0028
+#define SYSREG_RSR_NMI				0x002c
+#define SYSREG_RSR_DBG				0x0030
+#define SYSREG_RAR_SUP				0x0034
+#define SYSREG_RAR_INT0				0x0038
+#define SYSREG_RAR_INT1				0x003c
+#define SYSREG_RAR_INT2				0x0040
+#define SYSREG_RAR_INT3				0x0044
+#define SYSREG_RAR_EX				0x0048
+#define SYSREG_RAR_NMI				0x004c
+#define SYSREG_RAR_DBG				0x0050
+#define SYSREG_JECR				0x0054
+#define SYSREG_JOSP				0x0058
+#define SYSREG_JAVA_LV0				0x005c
+#define SYSREG_JAVA_LV1				0x0060
+#define SYSREG_JAVA_LV2				0x0064
+#define SYSREG_JAVA_LV3				0x0068
+#define SYSREG_JAVA_LV4				0x006c
+#define SYSREG_JAVA_LV5				0x0070
+#define SYSREG_JAVA_LV6				0x0074
+#define SYSREG_JAVA_LV7				0x0078
+#define SYSREG_JTBA				0x007c
+#define SYSREG_JBCR				0x0080
+#define SYSREG_CONFIG0				0x0100
+#define SYSREG_CONFIG1				0x0104
+#define SYSREG_COUNT				0x0108
+#define SYSREG_COMPARE				0x010c
+#define SYSREG_TLBEHI				0x0110
+#define SYSREG_TLBELO				0x0114
+#define SYSREG_PTBR				0x0118
+#define SYSREG_TLBEAR				0x011c
+#define SYSREG_MMUCR				0x0120
+#define SYSREG_TLBARLO				0x0124
+#define SYSREG_TLBARHI				0x0128
+#define SYSREG_PCCNT				0x012c
+#define SYSREG_PCNT0				0x0130
+#define SYSREG_PCNT1				0x0134
+#define SYSREG_PCCR				0x0138
+#define SYSREG_BEAR				0x013c
+#define SYSREG_SABAL				0x0300
+#define SYSREG_SABAH				0x0304
+#define SYSREG_SABD				0x0308
+
+/* Bitfields in SR */
+#define SYSREG_SR_C_OFFSET			0
+#define SYSREG_SR_C_SIZE			1
+#define SYSREG_Z_OFFSET				1
+#define SYSREG_Z_SIZE				1
+#define SYSREG_SR_N_OFFSET			2
+#define SYSREG_SR_N_SIZE			1
+#define SYSREG_SR_V_OFFSET			3
+#define SYSREG_SR_V_SIZE			1
+#define SYSREG_Q_OFFSET				4
+#define SYSREG_Q_SIZE				1
+#define SYSREG_L_OFFSET				5
+#define SYSREG_L_SIZE				1
+#define SYSREG_T_OFFSET				14
+#define SYSREG_T_SIZE				1
+#define SYSREG_SR_R_OFFSET			15
+#define SYSREG_SR_R_SIZE			1
+#define SYSREG_GM_OFFSET			16
+#define SYSREG_GM_SIZE				1
+#define SYSREG_I0M_OFFSET			17
+#define SYSREG_I0M_SIZE				1
+#define SYSREG_I1M_OFFSET			18
+#define SYSREG_I1M_SIZE				1
+#define SYSREG_I2M_OFFSET			19
+#define SYSREG_I2M_SIZE				1
+#define SYSREG_I3M_OFFSET			20
+#define SYSREG_I3M_SIZE				1
+#define SYSREG_EM_OFFSET			21
+#define SYSREG_EM_SIZE				1
+#define SYSREG_MODE_OFFSET			22
+#define SYSREG_MODE_SIZE			3
+#define SYSREG_M0_OFFSET			22
+#define SYSREG_M0_SIZE				1
+#define SYSREG_M1_OFFSET			23
+#define SYSREG_M1_SIZE				1
+#define SYSREG_M2_OFFSET			24
+#define SYSREG_M2_SIZE				1
+#define SYSREG_SR_D_OFFSET			26
+#define SYSREG_SR_D_SIZE			1
+#define SYSREG_DM_OFFSET			27
+#define SYSREG_DM_SIZE				1
+#define SYSREG_SR_J_OFFSET			28
+#define SYSREG_SR_J_SIZE			1
+#define SYSREG_H_OFFSET				29
+#define SYSREG_H_SIZE				1
+
+/* Bitfields in CPUCR */
+#define SYSREG_BI_OFFSET			0
+#define SYSREG_BI_SIZE				1
+#define SYSREG_BE_OFFSET			1
+#define SYSREG_BE_SIZE				1
+#define SYSREG_FE_OFFSET			2
+#define SYSREG_FE_SIZE				1
+#define SYSREG_RE_OFFSET			3
+#define SYSREG_RE_SIZE				1
+#define SYSREG_IBE_OFFSET			4
+#define SYSREG_IBE_SIZE				1
+#define SYSREG_IEE_OFFSET			5
+#define SYSREG_IEE_SIZE				1
+
+/* Bitfields in CONFIG0 */
+#define SYSREG_CONFIG0_R_OFFSET			0
+#define SYSREG_CONFIG0_R_SIZE			1
+#define SYSREG_CONFIG0_D_OFFSET			1
+#define SYSREG_CONFIG0_D_SIZE			1
+#define SYSREG_CONFIG0_S_OFFSET			2
+#define SYSREG_CONFIG0_S_SIZE			1
+#define SYSREG_CONFIG0_O_OFFSET			3
+#define SYSREG_CONFIG0_O_SIZE			1
+#define SYSREG_CONFIG0_P_OFFSET			4
+#define SYSREG_CONFIG0_P_SIZE			1
+#define SYSREG_CONFIG0_J_OFFSET			5
+#define SYSREG_CONFIG0_J_SIZE			1
+#define SYSREG_CONFIG0_F_OFFSET			6
+#define SYSREG_CONFIG0_F_SIZE			1
+#define SYSREG_MMUT_OFFSET			7
+#define SYSREG_MMUT_SIZE			3
+#define SYSREG_AR_OFFSET			10
+#define SYSREG_AR_SIZE				3
+#define SYSREG_AT_OFFSET			13
+#define SYSREG_AT_SIZE				3
+#define SYSREG_PROCESSORREVISION_OFFSET		16
+#define SYSREG_PROCESSORREVISION_SIZE		8
+#define SYSREG_PROCESSORID_OFFSET		24
+#define SYSREG_PROCESSORID_SIZE			8
+
+/* Bitfields in CONFIG1 */
+#define SYSREG_DASS_OFFSET			0
+#define SYSREG_DASS_SIZE			3
+#define SYSREG_DLSZ_OFFSET			3
+#define SYSREG_DLSZ_SIZE			3
+#define SYSREG_DSET_OFFSET			6
+#define SYSREG_DSET_SIZE			4
+#define SYSREG_IASS_OFFSET			10
+#define SYSREG_IASS_SIZE			3
+#define SYSREG_ILSZ_OFFSET			13
+#define SYSREG_ILSZ_SIZE			3
+#define SYSREG_ISET_OFFSET			16
+#define SYSREG_ISET_SIZE			4
+#define SYSREG_DMMUSZ_OFFSET			20
+#define SYSREG_DMMUSZ_SIZE			6
+#define SYSREG_IMMUSZ_OFFSET			26
+#define SYSREG_IMMUSZ_SIZE			6
+
+/* Bitfields in TLBEHI */
+#define SYSREG_ASID_OFFSET			0
+#define SYSREG_ASID_SIZE			8
+#define SYSREG_TLBEHI_I_OFFSET			8
+#define SYSREG_TLBEHI_I_SIZE			1
+#define SYSREG_TLBEHI_V_OFFSET			9
+#define SYSREG_TLBEHI_V_SIZE			1
+#define SYSREG_VPN_OFFSET			10
+#define SYSREG_VPN_SIZE				22
+
+/* Bitfields in TLBELO */
+#define SYSREG_W_OFFSET				0
+#define SYSREG_W_SIZE				1
+#define SYSREG_TLBELO_D_OFFSET			1
+#define SYSREG_TLBELO_D_SIZE			1
+#define SYSREG_SZ_OFFSET			2
+#define SYSREG_SZ_SIZE				2
+#define SYSREG_AP_OFFSET			4
+#define SYSREG_AP_SIZE				3
+#define SYSREG_B_OFFSET				7
+#define SYSREG_B_SIZE				1
+#define SYSREG_G_OFFSET				8
+#define SYSREG_G_SIZE				1
+#define SYSREG_TLBELO_C_OFFSET			9
+#define SYSREG_TLBELO_C_SIZE			1
+#define SYSREG_PFN_OFFSET			10
+#define SYSREG_PFN_SIZE				22
+
+/* Bitfields in MMUCR */
+#define SYSREG_E_OFFSET				0
+#define SYSREG_E_SIZE				1
+#define SYSREG_M_OFFSET				1
+#define SYSREG_M_SIZE				1
+#define SYSREG_MMUCR_I_OFFSET			2
+#define SYSREG_MMUCR_I_SIZE			1
+#define SYSREG_MMUCR_N_OFFSET			3
+#define SYSREG_MMUCR_N_SIZE			1
+#define SYSREG_MMUCR_S_OFFSET			4
+#define SYSREG_MMUCR_S_SIZE			1
+#define SYSREG_DLA_OFFSET			8
+#define SYSREG_DLA_SIZE				6
+#define SYSREG_DRP_OFFSET			14
+#define SYSREG_DRP_SIZE				6
+#define SYSREG_ILA_OFFSET			20
+#define SYSREG_ILA_SIZE				6
+#define SYSREG_IRP_OFFSET			26
+#define SYSREG_IRP_SIZE				6
+
+/* Bitfields in PCCR */
+#define SYSREG_PCCR_E_OFFSET			0
+#define SYSREG_PCCR_E_SIZE			1
+#define SYSREG_PCCR_R_OFFSET			1
+#define SYSREG_PCCR_R_SIZE			1
+#define SYSREG_PCCR_C_OFFSET			2
+#define SYSREG_PCCR_C_SIZE			1
+#define SYSREG_PCCR_S_OFFSET			3
+#define SYSREG_PCCR_S_SIZE			1
+#define SYSREG_IEC_OFFSET			4
+#define SYSREG_IEC_SIZE				1
+#define SYSREG_IE0_OFFSET			5
+#define SYSREG_IE0_SIZE				1
+#define SYSREG_IE1_OFFSET			6
+#define SYSREG_IE1_SIZE				1
+#define SYSREG_FC_OFFSET			8
+#define SYSREG_FC_SIZE				1
+#define SYSREG_F0_OFFSET			9
+#define SYSREG_F0_SIZE				1
+#define SYSREG_F1_OFFSET			10
+#define SYSREG_F1_SIZE				1
+#define SYSREG_CONF0_OFFSET			12
+#define SYSREG_CONF0_SIZE			6
+#define SYSREG_CONF1_OFFSET			18
+#define SYSREG_CONF1_SIZE			6
+
+/* Constants for ECR */
+#define ECR_UNRECOVERABLE			0
+#define ECR_TLB_MULTIPLE			1
+#define ECR_BUS_ERROR_WRITE			2
+#define ECR_BUS_ERROR_READ			3
+#define ECR_NMI					4
+#define ECR_ADDR_ALIGN_X			5
+#define ECR_PROTECTION_X			6
+#define ECR_DEBUG				7
+#define ECR_ILLEGAL_OPCODE			8
+#define ECR_UNIMPL_INSTRUCTION			9
+#define ECR_PRIVILEGE_VIOLATION			10
+#define ECR_FPE					11
+#define ECR_COPROC_ABSENT			12
+#define ECR_ADDR_ALIGN_R			13
+#define ECR_ADDR_ALIGN_W			14
+#define ECR_PROTECTION_R			15
+#define ECR_PROTECTION_W			16
+#define ECR_DTLB_MODIFIED			17
+#define ECR_TLB_MISS_X				20
+#define ECR_TLB_MISS_R				24
+#define ECR_TLB_MISS_W				28
+
+/* Bit manipulation macros */
+#define SYSREG_BIT(name)				\
+	(1 << SYSREG_##name##_OFFSET)
+#define SYSREG_BF(name,value)				\
+	(((value) & ((1 << SYSREG_##name##_SIZE) - 1))	\
+	 << SYSREG_##name##_OFFSET)
+#define SYSREG_BFEXT(name,value)\
+	(((value) >> SYSREG_##name##_OFFSET)		\
+	 & ((1 << SYSREG_##name##_SIZE) - 1))
+#define SYSREG_BFINS(name,value,old)			\
+	(((old) & ~(((1 << SYSREG_##name##_SIZE) - 1)	\
+		    << SYSREG_##name##_OFFSET))		\
+	 | SYSREG_BF(name,value))
+
+/* Register access macros */
+#ifdef __CHECKER__
+extern unsigned long __builtin_mfsr(unsigned long reg);
+extern void __builtin_mtsr(unsigned long reg, unsigned long value);
+#endif
+
+#define sysreg_read(reg)		__builtin_mfsr(SYSREG_##reg)
+#define sysreg_write(reg, value)	__builtin_mtsr(SYSREG_##reg, value)
+
+#endif /* __ASM_AVR32_SYSREG_H */
diff --git a/arch/avr32/include/asm/system.h b/arch/avr32/include/asm/system.h
new file mode 100644
index 00000000000..9702c2213e1
--- /dev/null
+++ b/arch/avr32/include/asm/system.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SYSTEM_H
+#define __ASM_AVR32_SYSTEM_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+#include <asm/ptrace.h>
+#include <asm/sysreg.h>
+
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define nop() asm volatile("nop")
+
+#define mb()			asm volatile("" : : : "memory")
+#define rmb()			mb()
+#define wmb()			asm volatile("sync 0" : : : "memory")
+#define read_barrier_depends()  do { } while(0)
+#define set_mb(var, value)      do { var = value; mb(); } while(0)
+
+/*
+ * Help PathFinder and other Nexus-compliant debuggers keep track of
+ * the current PID by emitting an Ownership Trace Message each time we
+ * switch task.
+ */
+#ifdef CONFIG_OWNERSHIP_TRACE
+#include <asm/ocd.h>
+#define finish_arch_switch(prev)			\
+	do {						\
+		ocd_write(PID, prev->pid);		\
+		ocd_write(PID, current->pid);		\
+	} while(0)
+#endif
+
+/*
+ * switch_to(prev, next, last) should switch from task `prev' to task
+ * `next'. `prev' will never be the same as `next'.
+ *
+ * We just delegate everything to the __switch_to assembly function,
+ * which is implemented in arch/avr32/kernel/switch_to.S
+ *
+ * mb() tells GCC not to cache `current' across this call.
+ */
+struct cpu_context;
+struct task_struct;
+extern struct task_struct *__switch_to(struct task_struct *,
+				       struct cpu_context *,
+				       struct cpu_context *);
+#define switch_to(prev, next, last)					\
+	do {								\
+		last = __switch_to(prev, &prev->thread.cpu_context + 1,	\
+				   &next->thread.cpu_context);		\
+	} while (0)
+
+#ifdef CONFIG_SMP
+# error "The AVR32 port does not support SMP"
+#else
+# define smp_mb()		barrier()
+# define smp_rmb()		barrier()
+# define smp_wmb()		barrier()
+# define smp_read_barrier_depends() do { } while(0)
+#endif
+
+#include <linux/irqflags.h>
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
+{
+	u32 ret;
+
+	asm volatile("xchg %[ret], %[m], %[val]"
+			: [ret] "=&r"(ret), "=m"(*m)
+			: "m"(*m), [m] "r"(m), [val] "r"(val)
+			: "memory");
+	return ret;
+}
+
+static inline unsigned long __xchg(unsigned long x,
+				       volatile void *ptr,
+				       int size)
+{
+	switch(size) {
+	case 4:
+		return xchg_u32(x, ptr);
+	default:
+		__xchg_called_with_bad_pointer();
+		return x;
+	}
+}
+
+static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
+					  unsigned long new)
+{
+	__u32 ret;
+
+	asm volatile(
+		"1:	ssrf	5\n"
+		"	ld.w	%[ret], %[m]\n"
+		"	cp.w	%[ret], %[old]\n"
+		"	brne	2f\n"
+		"	stcond	%[m], %[new]\n"
+		"	brne	1b\n"
+		"2:\n"
+		: [ret] "=&r"(ret), [m] "=m"(*m)
+		: "m"(m), [old] "ir"(old), [new] "r"(new)
+		: "memory", "cc");
+	return ret;
+}
+
+extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels(
+        volatile int * m, unsigned long old, unsigned long new);
+#define __cmpxchg_u64 __cmpxchg_u64_unsupported_on_32bit_kernels
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+	}
+
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr, old, new)					\
+	((typeof(*(ptr)))__cmpxchg((ptr), (unsigned long)(old),	\
+				   (unsigned long)(new),	\
+				   sizeof(*(ptr))))
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+#define cmpxchg_local(ptr, old, new)					\
+	((typeof(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(old),	\
+				   (unsigned long)(new),		\
+				   sizeof(*(ptr))))
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+struct pt_regs;
+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err);
+void _exception(long signr, struct pt_regs *regs, int code,
+		unsigned long addr);
+
+#define arch_align_stack(x)	(x)
+
+#endif /* __ASM_AVR32_SYSTEM_H */
diff --git a/arch/avr32/include/asm/termbits.h b/arch/avr32/include/asm/termbits.h
new file mode 100644
index 00000000000..db2daab31fd
--- /dev/null
+++ b/arch/avr32/include/asm/termbits.h
@@ -0,0 +1,195 @@
+#ifndef __ASM_AVR32_TERMBITS_H
+#define __ASM_AVR32_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ASM_AVR32_TERMBITS_H */
diff --git a/arch/avr32/include/asm/termios.h b/arch/avr32/include/asm/termios.h
new file mode 100644
index 00000000000..0152aba3515
--- /dev/null
+++ b/arch/avr32/include/asm/termios.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TERMIOS_H
+#define __ASM_AVR32_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+#include <asm-generic/termios.h>
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_AVR32_TERMIOS_H */
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
new file mode 100644
index 00000000000..294b25f9323
--- /dev/null
+++ b/arch/avr32/include/asm/thread_info.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_THREAD_INFO_H
+#define __ASM_AVR32_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;
+	__s32			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	__u32			rar_saved;	/* return address... */
+	__u32			rsr_saved;	/* ...and status register
+						   saved by debug handler
+						   when setting up
+						   trampoline */
+	struct restart_block	restart_block;
+	__u8			supervisor_stack[0];
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.cpu		= 0,						\
+	.preempt_count	= 1,						\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall				\
+	}								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * Get the thread information struct from C.
+ * We do the usual trick and use the lower end of the stack for this
+ */
+static inline struct thread_info *current_thread_info(void)
+{
+	unsigned long addr = ~(THREAD_SIZE - 1);
+
+	asm("and %0, sp" : "=r"(addr) : "0"(addr));
+	return (struct thread_info *)addr;
+}
+
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x40000000
+
+/*
+ * Thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_SIGPENDING          1       /* signal pending */
+#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_BREAKPOINT		4	/* enter monitor mode on return */
+#define TIF_SINGLE_STEP		5	/* single step in progress */
+#define TIF_MEMDIE		6
+#define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
+#define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
+#define TIF_FREEZE		29
+#define TIF_DEBUG		30	/* debugging enabled */
+#define TIF_USERSPACE		31      /* true if FS sets userspace */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_SINGLE_STEP	(1 << TIF_SINGLE_STEP)
+#define _TIF_MEMDIE		(1 << TIF_MEMDIE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+
+/* Note: The masks below must never span more than 16 bits! */
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK				\
+	((1 << TIF_SIGPENDING)			\
+	 | (1 << TIF_NEED_RESCHED)		\
+	 | (1 << TIF_POLLING_NRFLAG)		\
+	 | (1 << TIF_BREAKPOINT)		\
+	 | (1 << TIF_RESTORE_SIGMASK))
+
+/* work to do on any return to userspace */
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
+/* work to do on return from debug mode */
+#define _TIF_DBGWORK_MASK	(_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
+
+#endif /* __ASM_AVR32_THREAD_INFO_H */
diff --git a/arch/avr32/include/asm/timex.h b/arch/avr32/include/asm/timex.h
new file mode 100644
index 00000000000..187dcf38b21
--- /dev/null
+++ b/arch/avr32/include/asm/timex.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TIMEX_H
+#define __ASM_AVR32_TIMEX_H
+
+/*
+ * This is the frequency of the timer used for Linux's timer interrupt.
+ * The value should be defined as accurate as possible or under certain
+ * circumstances Linux timekeeping might become inaccurate or fail.
+ *
+ * For many system the exact clockrate of the timer isn't known but due to
+ * the way this value is used we can get away with a wrong value as long
+ * as this value is:
+ *
+ *  - a multiple of HZ
+ *  - a divisor of the actual rate
+ *
+ * 500000 is a good such cheat value.
+ *
+ * The obscure number 1193182 is the same as used by the original i8254
+ * time in legacy PC hardware; the chip is never found in AVR32 systems.
+ */
+#define CLOCK_TICK_RATE		500000	/* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif /* __ASM_AVR32_TIMEX_H */
diff --git a/arch/avr32/include/asm/tlb.h b/arch/avr32/include/asm/tlb.h
new file mode 100644
index 00000000000..5c55f9ce7c7
--- /dev/null
+++ b/arch/avr32/include/asm/tlb.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TLB_H
+#define __ASM_AVR32_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+	flush_cache_range(vma, vma->vm_start, vma->vm_end)
+
+#define tlb_end_vma(tlb, vma) \
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while(0)
+
+/*
+ * Flush whole TLB for MM
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+/*
+ * For debugging purposes
+ */
+extern void show_dtlb_entry(unsigned int index);
+extern void dump_dtlb(void);
+
+#endif /* __ASM_AVR32_TLB_H */
diff --git a/arch/avr32/include/asm/tlbflush.h b/arch/avr32/include/asm/tlbflush.h
new file mode 100644
index 00000000000..bf90a786f6b
--- /dev/null
+++ b/arch/avr32/include/asm/tlbflush.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TLBFLUSH_H
+#define __ASM_AVR32_TLBFLUSH_H
+
+#include <asm/mmu.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes' TLB entries
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLBs
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void flush_tlb(void);
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#endif /* __ASM_AVR32_TLBFLUSH_H */
diff --git a/arch/avr32/include/asm/topology.h b/arch/avr32/include/asm/topology.h
new file mode 100644
index 00000000000..5b766cbb480
--- /dev/null
+++ b/arch/avr32/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_TOPOLOGY_H
+#define __ASM_AVR32_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* __ASM_AVR32_TOPOLOGY_H */
diff --git a/arch/avr32/include/asm/traps.h b/arch/avr32/include/asm/traps.h
new file mode 100644
index 00000000000..6a8fb944f41
--- /dev/null
+++ b/arch/avr32/include/asm/traps.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TRAPS_H
+#define __ASM_AVR32_TRAPS_H
+
+#include <linux/list.h>
+
+struct undef_hook {
+	struct list_head node;
+	u32 insn_mask;
+	u32 insn_val;
+	int (*fn)(struct pt_regs *regs, u32 insn);
+};
+
+void register_undef_hook(struct undef_hook *hook);
+void unregister_undef_hook(struct undef_hook *hook);
+
+#endif /* __ASM_AVR32_TRAPS_H */
diff --git a/arch/avr32/include/asm/types.h b/arch/avr32/include/asm/types.h
new file mode 100644
index 00000000000..9cefda6f534
--- /dev/null
+++ b/arch/avr32/include/asm/types.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TYPES_H
+#define __ASM_AVR32_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+
+#endif /* __ASM_AVR32_TYPES_H */
diff --git a/arch/avr32/include/asm/uaccess.h b/arch/avr32/include/asm/uaccess.h
new file mode 100644
index 00000000000..ed092395215
--- /dev/null
+++ b/arch/avr32/include/asm/uaccess.h
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_UACCESS_H
+#define __ASM_AVR32_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+typedef struct {
+	unsigned int is_user_space;
+} mm_segment_t;
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons (Data Segment Register?), these macros are misnamed.
+ */
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define segment_eq(a,b)	((a).is_user_space == (b).is_user_space)
+
+#define USER_ADDR_LIMIT 0x80000000
+
+#define KERNEL_DS	MAKE_MM_SEG(0)
+#define USER_DS		MAKE_MM_SEG(1)
+
+#define get_ds()	(KERNEL_DS)
+
+static inline mm_segment_t get_fs(void)
+{
+	return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE));
+}
+
+static inline void set_fs(mm_segment_t s)
+{
+	if (s.is_user_space)
+		set_thread_flag(TIF_USERSPACE);
+	else
+		clear_thread_flag(TIF_USERSPACE);
+}
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * We do the following checks:
+ *   1. Is the access from kernel space?
+ *   2. Does (addr + size) set the carry bit?
+ *   3. Is (addr + size) a negative number (i.e. >= 0x80000000)?
+ *
+ * If yes on the first check, access is granted.
+ * If no on any of the others, access is denied.
+ */
+#define __range_ok(addr, size)						\
+	(test_thread_flag(TIF_USERSPACE)				\
+	 && (((unsigned long)(addr) >= 0x80000000)			\
+	     || ((unsigned long)(size) > 0x80000000)			\
+	     || (((unsigned long)(addr) + (unsigned long)(size)) > 0x80000000)))
+
+#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
+
+/* Generic arbitrary sized copy. Return the number of bytes NOT copied */
+extern __kernel_size_t __copy_user(void *to, const void *from,
+				   __kernel_size_t n);
+
+extern __kernel_size_t copy_to_user(void __user *to, const void *from,
+				    __kernel_size_t n);
+extern __kernel_size_t copy_from_user(void *to, const void __user *from,
+				      __kernel_size_t n);
+
+static inline __kernel_size_t __copy_to_user(void __user *to, const void *from,
+					     __kernel_size_t n)
+{
+	return __copy_user((void __force *)to, from, n);
+}
+static inline __kernel_size_t __copy_from_user(void *to,
+					       const void __user *from,
+					       __kernel_size_t n)
+{
+	return __copy_user(to, (const void __force *)from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/*
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr)	\
+	__put_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr) \
+	__get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+	__put_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+	__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+extern int __get_user_bad(void);
+extern int __put_user_bad(void);
+
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	unsigned long __gu_val = 0;					\
+	int __gu_err = 0;						\
+									\
+	switch (size) {							\
+	case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break;	\
+	case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break;	\
+	case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break;	\
+	default: __gu_err = __get_user_bad(); break;			\
+	}								\
+									\
+	x = (typeof(*(ptr)))__gu_val;					\
+	__gu_err;							\
+})
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	unsigned long __gu_val = 0;					\
+	const typeof(*(ptr)) __user * __gu_addr = (ptr);		\
+	int __gu_err = 0;						\
+									\
+	if (access_ok(VERIFY_READ, __gu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__get_user_asm("ub", __gu_val, __gu_addr,	\
+				       __gu_err);			\
+			break;						\
+		case 2:							\
+			__get_user_asm("uh", __gu_val, __gu_addr,	\
+				       __gu_err);			\
+			break;						\
+		case 4:							\
+			__get_user_asm("w", __gu_val, __gu_addr,	\
+				       __gu_err);			\
+			break;						\
+		default:						\
+			__gu_err = __get_user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__gu_err = -EFAULT;					\
+	}								\
+	x = (typeof(*(ptr)))__gu_val;					\
+	__gu_err;							\
+})
+
+#define __get_user_asm(suffix, __gu_val, ptr, __gu_err)			\
+	asm volatile(							\
+		"1:	ld." suffix "	%1, %3			\n"	\
+		"2:						\n"	\
+		"	.section .fixup, \"ax\"			\n"	\
+		"3:	mov	%0, %4				\n"	\
+		"	rjmp	2b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table, \"a\"		\n"	\
+		"	.long	1b, 3b				\n"	\
+		"	.previous				\n"	\
+		: "=r"(__gu_err), "=r"(__gu_val)			\
+		: "0"(__gu_err), "m"(*(ptr)), "i"(-EFAULT))
+
+#define __put_user_nocheck(x, ptr, size)				\
+({									\
+	typeof(*(ptr)) __pu_val;					\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	switch (size) {							\
+	case 1: __put_user_asm("b", ptr, __pu_val, __pu_err); break;	\
+	case 2: __put_user_asm("h", ptr, __pu_val, __pu_err); break;	\
+	case 4: __put_user_asm("w", ptr, __pu_val, __pu_err); break;	\
+	case 8: __put_user_asm("d", ptr, __pu_val, __pu_err); break;	\
+	default: __pu_err = __put_user_bad(); break;			\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	typeof(*(ptr)) __pu_val;					\
+	typeof(*(ptr)) __user *__pu_addr = (ptr);			\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__put_user_asm("b", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 2:							\
+			__put_user_asm("h", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 4:							\
+			__put_user_asm("w", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 8:							\
+			__put_user_asm("d", __pu_addr, __pu_val,		\
+				       __pu_err);			\
+			break;						\
+		default:						\
+			__pu_err = __put_user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__pu_err = -EFAULT;					\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_asm(suffix, ptr, __pu_val, __gu_err)			\
+	asm volatile(							\
+		"1:	st." suffix "	%1, %3			\n"	\
+		"2:						\n"	\
+		"	.section .fixup, \"ax\"			\n"	\
+		"3:	mov	%0, %4				\n"	\
+		"	rjmp	2b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table, \"a\"		\n"	\
+		"	.long	1b, 3b				\n"	\
+		"	.previous				\n"	\
+		: "=r"(__gu_err), "=m"(*(ptr))				\
+		: "0"(__gu_err), "r"(__pu_val), "i"(-EFAULT))
+
+extern __kernel_size_t clear_user(void __user *addr, __kernel_size_t size);
+extern __kernel_size_t __clear_user(void __user *addr, __kernel_size_t size);
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+
+extern long strnlen_user(const char __user *__s, long __n);
+extern long __strnlen_user(const char __user *__s, long __n);
+
+#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+#endif /* __ASM_AVR32_UACCESS_H */
diff --git a/arch/avr32/include/asm/ucontext.h b/arch/avr32/include/asm/ucontext.h
new file mode 100644
index 00000000000..ac7259c2a79
--- /dev/null
+++ b/arch/avr32/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_AVR32_UCONTEXT_H
+#define __ASM_AVR32_UCONTEXT_H
+
+struct ucontext {
+	unsigned long		uc_flags;
+	struct ucontext	*	uc_link;
+	stack_t			uc_stack;
+	struct sigcontext	uc_mcontext;
+	sigset_t		uc_sigmask;
+};
+
+#endif /* __ASM_AVR32_UCONTEXT_H */
diff --git a/arch/avr32/include/asm/unaligned.h b/arch/avr32/include/asm/unaligned.h
new file mode 100644
index 00000000000..04187729047
--- /dev/null
+++ b/arch/avr32/include/asm/unaligned.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_AVR32_UNALIGNED_H
+#define _ASM_AVR32_UNALIGNED_H
+
+/*
+ * AVR32 can handle some unaligned accesses, depending on the
+ * implementation.  The AVR32 AP implementation can handle unaligned
+ * words, but halfwords must be halfword-aligned, and doublewords must
+ * be word-aligned.
+ *
+ * However, swapped word loads must be word-aligned so we can't
+ * optimize word loads in general.
+ */
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_AVR32_UNALIGNED_H */
diff --git a/arch/avr32/include/asm/unistd.h b/arch/avr32/include/asm/unistd.h
new file mode 100644
index 00000000000..89861a27543
--- /dev/null
+++ b/arch/avr32/include/asm/unistd.h
@@ -0,0 +1,345 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_UNISTD_H
+#define __ASM_AVR32_UNISTD_H
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_umask		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_lchown		 17
+#define __NR_lseek		 18
+#define __NR__llseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount2		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_pause		 28
+#define __NR_utime		 29
+#define __NR_stat		 30
+#define __NR_fstat		 31
+#define __NR_lstat		 32
+#define __NR_access		 33
+#define __NR_chroot		 34
+#define __NR_sync		 35
+#define __NR_fsync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_clone		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_getcwd		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_setfsuid		 52
+#define __NR_setfsgid		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_setpgid		 56
+#define __NR_mremap		 57
+#define __NR_setresuid		 58
+#define __NR_getresuid		 59
+#define __NR_setreuid		 60
+#define __NR_setregid		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_rt_sigaction	 67
+#define __NR_rt_sigreturn	 68
+#define __NR_rt_sigprocmask	 69
+#define __NR_rt_sigpending	 70
+#define __NR_rt_sigtimedwait	 71
+#define __NR_rt_sigqueueinfo	 72
+#define __NR_rt_sigsuspend	 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* SuS compliant getrlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_fchdir		 84
+#define __NR_readlink		 85
+#define __NR_pread		 86
+#define __NR_pwrite		 87
+#define __NR_swapon		 88
+#define __NR_reboot		 89
+#define __NR_mmap2		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_wait4		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_vhangup		101
+#define __NR_sigaltstack	102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_swapoff		106
+#define __NR_sysinfo		107
+/* 108 was __NR_ipc for a little while */
+#define __NR_sendfile		109
+#define __NR_setdomainname	110
+#define __NR_uname		111
+#define __NR_adjtimex		112
+#define __NR_mprotect		113
+#define __NR_vfork		114
+#define __NR_init_module	115
+#define __NR_delete_module	116
+#define __NR_quotactl		117
+#define __NR_getpgid		118
+#define __NR_bdflush		119
+#define __NR_sysfs		120
+#define __NR_personality	121
+#define __NR_afs_syscall	122 /* Syscall for Andrew File System */
+#define __NR_getdents		123
+#define __NR_flock		124
+#define __NR_msync		125
+#define __NR_readv		126
+#define __NR_writev		127
+#define __NR_getsid		128
+#define __NR_fdatasync		129
+#define __NR__sysctl		130
+#define __NR_mlock		131
+#define __NR_munlock		132
+#define __NR_mlockall		133
+#define __NR_munlockall		134
+#define __NR_sched_setparam		135
+#define __NR_sched_getparam		136
+#define __NR_sched_setscheduler		137
+#define __NR_sched_getscheduler		138
+#define __NR_sched_yield		139
+#define __NR_sched_get_priority_max	140
+#define __NR_sched_get_priority_min	141
+#define __NR_sched_rr_get_interval	142
+#define __NR_nanosleep		143
+#define __NR_poll		144
+#define __NR_nfsservctl		145
+#define __NR_setresgid		146
+#define __NR_getresgid		147
+#define __NR_prctl              148
+#define __NR_socket		149
+#define __NR_bind		150
+#define __NR_connect		151
+#define __NR_listen		152
+#define __NR_accept		153
+#define __NR_getsockname	154
+#define __NR_getpeername	155
+#define __NR_socketpair		156
+#define __NR_send		157
+#define __NR_recv		158
+#define __NR_sendto		159
+#define __NR_recvfrom		160
+#define __NR_shutdown		161
+#define __NR_setsockopt		162
+#define __NR_getsockopt		163
+#define __NR_sendmsg		164
+#define __NR_recvmsg		165
+#define __NR_truncate64		166
+#define __NR_ftruncate64	167
+#define __NR_stat64		168
+#define __NR_lstat64		169
+#define __NR_fstat64		170
+#define __NR_pivot_root		171
+#define __NR_mincore		172
+#define __NR_madvise		173
+#define __NR_getdents64		174
+#define __NR_fcntl64		175
+#define __NR_gettid		176
+#define __NR_readahead		177
+#define __NR_setxattr		178
+#define __NR_lsetxattr		179
+#define __NR_fsetxattr		180
+#define __NR_getxattr		181
+#define __NR_lgetxattr		182
+#define __NR_fgetxattr		183
+#define __NR_listxattr		184
+#define __NR_llistxattr		185
+#define __NR_flistxattr		186
+#define __NR_removexattr	187
+#define __NR_lremovexattr	188
+#define __NR_fremovexattr	189
+#define __NR_tkill		190
+#define __NR_sendfile64		191
+#define __NR_futex		192
+#define __NR_sched_setaffinity	193
+#define __NR_sched_getaffinity	194
+#define __NR_capget		195
+#define __NR_capset		196
+#define __NR_io_setup		197
+#define __NR_io_destroy		198
+#define __NR_io_getevents	199
+#define __NR_io_submit		200
+#define __NR_io_cancel		201
+#define __NR_fadvise64		202
+#define __NR_exit_group		203
+#define __NR_lookup_dcookie	204
+#define __NR_epoll_create	205
+#define __NR_epoll_ctl		206
+#define __NR_epoll_wait		207
+#define __NR_remap_file_pages	208
+#define __NR_set_tid_address	209
+
+#define __NR_timer_create	210
+#define __NR_timer_settime	211
+#define __NR_timer_gettime	212
+#define __NR_timer_getoverrun	213
+#define __NR_timer_delete	214
+#define __NR_clock_settime	215
+#define __NR_clock_gettime	216
+#define __NR_clock_getres	217
+#define __NR_clock_nanosleep	218
+#define __NR_statfs64		219
+#define __NR_fstatfs64		220
+#define __NR_tgkill		221
+				/* 222 reserved for tux */
+#define __NR_utimes		223
+#define __NR_fadvise64_64	224
+
+#define __NR_cacheflush		225
+
+#define __NR_vserver		226
+#define __NR_mq_open		227
+#define __NR_mq_unlink		228
+#define __NR_mq_timedsend	229
+#define __NR_mq_timedreceive	230
+#define __NR_mq_notify		231
+#define __NR_mq_getsetattr	232
+#define __NR_kexec_load		233
+#define __NR_waitid		234
+#define __NR_add_key		235
+#define __NR_request_key	236
+#define __NR_keyctl		237
+#define __NR_ioprio_set		238
+#define __NR_ioprio_get		239
+#define __NR_inotify_init	240
+#define __NR_inotify_add_watch	241
+#define __NR_inotify_rm_watch	242
+#define __NR_openat		243
+#define __NR_mkdirat		244
+#define __NR_mknodat		245
+#define __NR_fchownat		246
+#define __NR_futimesat		247
+#define __NR_fstatat64		248
+#define __NR_unlinkat		249
+#define __NR_renameat		250
+#define __NR_linkat		251
+#define __NR_symlinkat		252
+#define __NR_readlinkat		253
+#define __NR_fchmodat		254
+#define __NR_faccessat		255
+#define __NR_pselect6		256
+#define __NR_ppoll		257
+#define __NR_unshare		258
+#define __NR_set_robust_list	259
+#define __NR_get_robust_list	260
+#define __NR_splice		261
+#define __NR_sync_file_range	262
+#define __NR_tee		263
+#define __NR_vmsplice		264
+#define __NR_epoll_pwait	265
+
+#define __NR_msgget		266
+#define __NR_msgsnd		267
+#define __NR_msgrcv		268
+#define __NR_msgctl		269
+#define __NR_semget		270
+#define __NR_semop		271
+#define __NR_semctl		272
+#define __NR_semtimedop		273
+#define __NR_shmat		274
+#define __NR_shmget		275
+#define __NR_shmdt		276
+#define __NR_shmctl		277
+
+#define __NR_utimensat		278
+#define __NR_signalfd		279
+/* 280 was __NR_timerfd */
+#define __NR_eventfd		281
+
+#ifdef __KERNEL__
+#define NR_syscalls		282
+
+/* Old stuff */
+#define __IGNORE_uselib
+#define __IGNORE_mmap
+
+/* NUMA stuff */
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+
+/* SMP stuff */
+#define __IGNORE_getcpu
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_AVR32_UNISTD_H */
diff --git a/arch/avr32/include/asm/user.h b/arch/avr32/include/asm/user.h
new file mode 100644
index 00000000000..7e9152f81f5
--- /dev/null
+++ b/arch/avr32/include/asm/user.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Note: We may not need these definitions for AVR32, as we don't
+ * support a.out.
+ */
+#ifndef __ASM_AVR32_USER_H
+#define __ASM_AVR32_USER_H
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+
+struct user_fpu_struct {
+	/* We have no FPU (yet) */
+};
+
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __ASM_AVR32_USER_H */
diff --git a/arch/avr32/include/asm/xor.h b/arch/avr32/include/asm/xor.h
new file mode 100644
index 00000000000..99c87aa0af4
--- /dev/null
+++ b/arch/avr32/include/asm/xor.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_XOR_H
+#define _ASM_XOR_H
+
+#include <asm-generic/xor.h>
+
+#endif
diff --git a/arch/avr32/kernel/.gitignore b/arch/avr32/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/avr32/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/avr32/kernel/asm-offsets.c b/arch/avr32/kernel/asm-offsets.c
index e4796c67a83..d6a8193a1d2 100644
--- a/arch/avr32/kernel/asm-offsets.c
+++ b/arch/avr32/kernel/asm-offsets.c
@@ -4,6 +4,8 @@
  * to extract and format the required data.
  */
 
+#include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
 
@@ -17,4 +19,8 @@ void foo(void)
 	OFFSET(TI_rar_saved, thread_info, rar_saved);
 	OFFSET(TI_rsr_saved, thread_info, rsr_saved);
 	OFFSET(TI_restart_block, thread_info, restart_block);
+	BLANK();
+	OFFSET(TSK_active_mm, task_struct, active_mm);
+	BLANK();
+	OFFSET(MM_pgd, mm_struct, pgd);
 }
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 84a7d44edc6..11e310c567a 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -58,6 +58,7 @@ EXPORT_SYMBOL(find_first_zero_bit);
 EXPORT_SYMBOL(find_next_zero_bit);
 EXPORT_SYMBOL(find_first_bit);
 EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_le_bit);
 EXPORT_SYMBOL(generic_find_next_zero_le_bit);
 
 /* I/O primitives (lib/io-*.S) */
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
index b8409caeb23..e84faffbbec 100644
--- a/arch/avr32/kernel/cpu.c
+++ b/arch/avr32/kernel/cpu.c
@@ -26,14 +26,16 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
  * XXX: If/when a SMP-capable implementation of AVR32 will ever be
  * made, we must make sure that the code executes on the correct CPU.
  */
-static ssize_t show_pc0event(struct sys_device *dev, char *buf)
+static ssize_t show_pc0event(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f);
 }
-static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc0event(struct sys_device *dev,
+			struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -46,15 +48,17 @@ static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc0count(struct sys_device *dev, char *buf)
+static ssize_t show_pc0count(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pcnt0;
 
 	pcnt0 = sysreg_read(PCNT0);
 	return sprintf(buf, "%lu\n", pcnt0);
 }
-static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
-			      size_t count)
+static ssize_t store_pc0count(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				const char *buf, size_t count)
 {
 	unsigned long val;
 	char *endp;
@@ -67,14 +71,16 @@ static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pc1event(struct sys_device *dev, char *buf)
+static ssize_t show_pc1event(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f);
 }
-static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1event(struct sys_device *dev,
+			      struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -87,14 +93,16 @@ static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc1count(struct sys_device *dev, char *buf)
+static ssize_t show_pc1count(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pcnt1;
 
 	pcnt1 = sysreg_read(PCNT1);
 	return sprintf(buf, "%lu\n", pcnt1);
 }
-static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1count(struct sys_device *dev,
+				struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -108,14 +116,16 @@ static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pccycles(struct sys_device *dev, char *buf)
+static ssize_t show_pccycles(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccnt;
 
 	pccnt = sysreg_read(PCCNT);
 	return sprintf(buf, "%lu\n", pccnt);
 }
-static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
+static ssize_t store_pccycles(struct sys_device *dev,
+				struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -129,14 +139,16 @@ static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pcenable(struct sys_device *dev, char *buf)
+static ssize_t show_pcenable(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "%c\n", (pccr & 1)?'1':'0');
 }
-static ssize_t store_pcenable(struct sys_device *dev, const char *buf,
+static ssize_t store_pcenable(struct sys_device *dev,
+			      struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long pccr, val;
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 2b398cae110..33d49377b8b 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -334,9 +334,64 @@ save_full_context_ex:
 
 	/* Low-level exception handlers */
 handle_critical:
+	/*
+	 * AT32AP700x errata:
+	 *
+	 * After a Java stack overflow or underflow trap, any CPU
+	 * memory access may cause erratic behavior. This will happen
+	 * when the four least significant bits of the JOSP system
+	 * register contains any value between 9 and 15 (inclusive).
+	 *
+	 * Possible workarounds:
+	 *   - Don't use the Java Extension Module
+	 *   - Ensure that the stack overflow and underflow trap
+	 *     handlers do not do any memory access or trigger any
+	 *     exceptions before the overflow/underflow condition is
+	 *     cleared (by incrementing or decrementing the JOSP)
+	 *   - Make sure that JOSP does not contain any problematic
+	 *     value before doing any exception or interrupt
+	 *     processing.
+	 *   - Set up a critical exception handler which writes a
+	 *     known-to-be-safe value, e.g. 4, to JOSP before doing
+	 *     any further processing.
+	 *
+	 * We'll use the last workaround for now since we cannot
+	 * guarantee that user space processes don't use Java mode.
+	 * Non-well-behaving userland will be terminated with extreme
+	 * prejudice.
+	 */
+#ifdef CONFIG_CPU_AT32AP700X
+	/*
+	 * There's a chance we can't touch memory, so temporarily
+	 * borrow PTBR to save the stack pointer while we fix things
+	 * up...
+	 */
+	mtsr	SYSREG_PTBR, sp
+	mov	sp, 4
+	mtsr	SYSREG_JOSP, sp
+	mfsr	sp, SYSREG_PTBR
+	sub	pc, -2
+
+	/* Push most of pt_regs on stack. We'll do the rest later */
 	sub	sp, 4
-	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	pushm	r0-r12
+
+	/* PTBR mirrors current_thread_info()->task->active_mm->pgd */
+	get_thread_info r0
+	ld.w	r1, r0[TI_task]
+	ld.w	r2, r1[TSK_active_mm]
+	ld.w	r3, r2[MM_pgd]
+	mtsr	SYSREG_PTBR, r3
+#else
+	sub	sp, 4
+	pushm	r0-r12
+#endif
+	sub	r0, sp, -(14 * 4)
+	mov	r1, lr
+	mfsr	r2, SYSREG_RAR_EX
+	mfsr	r3, SYSREG_RSR_EX
+	pushm	r0-r3
+
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
 	rcall	do_critical_exception
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 6cf9df17627..2c08ac992ac 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -18,7 +18,7 @@
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
 
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
@@ -31,7 +31,7 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			cpu_idle_sleep();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index ce48c14f434..d8e623c426c 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -26,8 +26,8 @@
 #include <asm/setup.h>
 #include <asm/sysreg.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
+#include <mach/board.h>
+#include <mach/init.h>
 
 extern int root_mountflags;
 
diff --git a/arch/avr32/kernel/stacktrace.c b/arch/avr32/kernel/stacktrace.c
index f4bdb448049..c09f0d8dd67 100644
--- a/arch/avr32/kernel/stacktrace.c
+++ b/arch/avr32/kernel/stacktrace.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 
 register unsigned long current_frame_pointer asm("r7");
 
diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S
index 890286a1e62..673178e235f 100644
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@@ -109,3 +109,12 @@ __sys_epoll_pwait:
 	rcall	sys_epoll_pwait
 	sub	sp, -4
 	popm	pc
+
+	.global __sys_sync_file_range
+	.type	__sys_sync_file_range,@function
+__sys_sync_file_range:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_sync_file_range
+	sub	sp, -4
+	popm	pc
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index 478bda4c4a0..7ee0057613b 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -275,7 +275,7 @@ sys_call_table:
 	.long	sys_set_robust_list
 	.long	sys_get_robust_list	/* 260 */
 	.long	__sys_splice
-	.long	sys_sync_file_range
+	.long	__sys_sync_file_range
 	.long	sys_tee
 	.long	sys_vmsplice
 	.long	__sys_epoll_pwait	/* 265 */
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index abd954fb7ba..283481d74a5 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -15,7 +15,7 @@
 
 #include <asm/sysreg.h>
 
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 
 static cycle_t read_cycle_count(void)
@@ -43,6 +43,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evdev = dev_id;
 
+	if (unlikely(!(intc_get_pending(0) & 1)))
+		return IRQ_NONE;
+
 	/*
 	 * Disable the interrupt until the clockevent subsystem
 	 * reprograms it.
@@ -55,7 +58,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	/* Oprofile uses the same irq as the timer, so allow it to be shared */
+	.flags		= IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED,
 	.name		= "avr32_comparator",
 };
 
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index b835c4c0136..0d987373bc0 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -116,15 +116,15 @@ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
 	switch (ret) {
 	case NOTIFY_OK:
 	case NOTIFY_STOP:
-		return;
+		break;
 	case NOTIFY_BAD:
 		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
 	default:
+		printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+		nmi_disable();
 		break;
 	}
-
-	printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
-	nmi_disable();
+	nmi_exit();
 }
 
 asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S
index c6b91dee857..997b33b2288 100644
--- a/arch/avr32/lib/findbit.S
+++ b/arch/avr32/lib/findbit.S
@@ -123,6 +123,36 @@ ENTRY(find_next_bit)
 	brgt	1b
 	retal	r11
 
+ENTRY(generic_find_next_le_bit)
+	lsr	r8, r10, 5
+	sub	r9, r11, r10
+	retle	r11
+
+	lsl	r8, 2
+	add	r12, r8
+	andl	r10, 31, COH
+	breq	1f
+
+	/* offset is not word-aligned. Handle the first (32 - r10) bits */
+	ldswp.w	r8, r12[0]
+	sub	r12, -4
+	lsr	r8, r8, r10
+	brne	.L_found
+
+	/* r9 = r9 - (32 - r10) = r9 + r10 - 32 */
+	add	r9, r10
+	sub	r9, 32
+	retle	r11
+
+	/* Main loop. offset must be word-aligned */
+1:	ldswp.w	r8, r12[0]
+	cp.w	r8, 0
+	brne	.L_found
+	sub	r12, -4
+	sub	r9, 32
+	brgt	1b
+	retal	r11
+
 ENTRY(generic_find_next_zero_le_bit)
 	lsr	r8, r10, 5
 	sub	r9, r11, r10
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index d5018e2eed2..514c9a9b009 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,4 +1,5 @@
 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
+obj-y				+= hmatrix.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
 obj-$(CONFIG_PM)		+= pm.o
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 021d5121718..e01dbe4ebb4 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -7,10 +7,12 @@
  */
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dw_dmac.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
@@ -18,15 +20,15 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
-#include <asm/arch/sram.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/hmatrix.h>
+#include <mach/portmux.h>
+#include <mach/sram.h>
 
 #include <video/atmel_lcdc.h>
 
 #include "clock.h"
-#include "hmatrix.h"
 #include "pio.h"
 #include "pm.h"
 
@@ -594,6 +596,17 @@ static void __init genclk_init_parent(struct clk *clk)
 	clk->parent = parent;
 }
 
+static struct dw_dma_platform_data dw_dmac0_data = {
+	.nr_channels	= 3,
+};
+
+static struct resource dw_dmac0_resource[] = {
+	PBMEM(0xff200000),
+	IRQ(2),
+};
+DEFINE_DEV_DATA(dw_dmac, 0);
+DEV_CLK(hclk, dw_dmac0, hsb, 10);
+
 /* --------------------------------------------------------------------
  *  System peripherals
  * -------------------------------------------------------------------- */
@@ -708,22 +721,11 @@ static struct clk pico_clk = {
 	.users		= 1,
 };
 
-static struct resource dmaca0_resource[] = {
-	{
-		.start	= 0xff200000,
-		.end	= 0xff20ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(2),
-};
-DEFINE_DEV(dmaca, 0);
-DEV_CLK(hclk, dmaca0, hsb, 10);
-
 /* --------------------------------------------------------------------
  * HMATRIX
  * -------------------------------------------------------------------- */
 
-static struct clk hmatrix_clk = {
+struct clk at32_hmatrix_clk = {
 	.name		= "hmatrix_clk",
 	.parent		= &pbb_clk,
 	.mode		= pbb_clk_mode,
@@ -731,12 +733,6 @@ static struct clk hmatrix_clk = {
 	.index		= 2,
 	.users		= 1,
 };
-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
-
-#define hmatrix_readl(reg)					\
-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-#define hmatrix_writel(reg,value)				\
-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
 
 /*
  * Set bits in the HMATRIX Special Function Register (SFR) used by the
@@ -746,13 +742,7 @@ static struct clk hmatrix_clk = {
  */
 static inline void set_ebi_sfr_bits(u32 mask)
 {
-	u32 sfr;
-
-	clk_enable(&hmatrix_clk);
-	sfr = hmatrix_readl(SFR4);
-	sfr |= mask;
-	hmatrix_writel(SFR4, sfr);
-	clk_disable(&hmatrix_clk);
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask);
 }
 
 /* --------------------------------------------------------------------
@@ -831,7 +821,7 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&at32_eic0_device);
 	platform_device_register(&smc0_device);
 	platform_device_register(&pdc_device);
-	platform_device_register(&dmaca0_device);
+	platform_device_register(&dw_dmac0_device);
 
 	platform_device_register(&at32_tcb0_device);
 	platform_device_register(&at32_tcb1_device);
@@ -1284,7 +1274,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct mci_platform_data	_data;
 	struct platform_device		*pdev;
-	struct dw_dma_slave		*dws;
 
 	if (id != 0)
 		return NULL;
@@ -1299,7 +1288,9 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 
 	if (!data) {
 		data = &_data;
-		memset(data, 0, sizeof(struct mci_platform_data));
+		memset(data, -1, sizeof(struct mci_platform_data));
+		data->detect_pin = GPIO_PIN_NONE;
+		data->wp_pin = GPIO_PIN_NONE;
 	}
 
 	if (platform_device_add_data(pdev, data,
@@ -1313,12 +1304,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
-	if (data) {
-		if (data->detect_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->detect_pin, 0);
-		if (data->wp_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->wp_pin, 0);
-	}
+	if (gpio_is_valid(data->detect_pin))
+		at32_select_gpio(data->detect_pin, 0);
+	if (gpio_is_valid(data->wp_pin))
+		at32_select_gpio(data->wp_pin, 0);
 
 	atmel_mci0_pclk.dev = &pdev->dev;
 
@@ -1778,7 +1767,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
 		break;
 	case 5:
 		ret = platform_device_add_resources(pdev,
@@ -1788,7 +1777,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 			return ret;
 
 		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
 		break;
 	default:
 		return -EINVAL;
@@ -1852,11 +1841,11 @@ at32_add_device_cf(unsigned int id, unsigned int extint,
 	if (at32_init_ide_or_cf(pdev, data->cs, extint))
 		goto fail;
 
-	if (data->detect_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->detect_pin))
 		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-	if (data->reset_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->reset_pin))
 		at32_select_gpio(data->reset_pin, 0);
-	if (data->vcc_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->vcc_pin))
 		at32_select_gpio(data->vcc_pin, 0);
 	/* READY is used as extint, so we can't select it as gpio */
 
@@ -1870,6 +1859,58 @@ fail:
 #endif
 
 /* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+	{
+		.start	= 0x0c000000,
+		.end	= 0x0fffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xfff03c00,
+		.end	= 0xfff03fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+	struct platform_device *pdev;
+
+	if (id != 0 || !data)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_nand", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_resources(pdev, smc_cs3_resource,
+				ARRAY_SIZE(smc_cs3_resource)))
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct atmel_nand_data)))
+		goto fail;
+
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
+	if (data->enable_pin)
+		at32_select_gpio(data->enable_pin,
+				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	if (data->rdy_pin)
+		at32_select_gpio(data->rdy_pin, 0);
+	if (data->det_pin)
+		at32_select_gpio(data->det_pin, 0);
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
  * AC97C
  * -------------------------------------------------------------------- */
 static struct resource atmel_ac97c0_resource[] __initdata = {
@@ -1884,9 +1925,11 @@ static struct clk atmel_ac97c0_pclk = {
 	.index		= 10,
 };
 
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+struct platform_device *__init
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 {
 	struct platform_device *pdev;
+	struct ac97c_platform_data _data;
 
 	if (id != 0)
 		return NULL;
@@ -1897,19 +1940,37 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id)
 
 	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
 				ARRAY_SIZE(atmel_ac97c0_resource)))
-		goto err_add_resources;
+		goto fail;
+
+	if (!data) {
+		data = &_data;
+		memset(data, 0, sizeof(struct ac97c_platform_data));
+		data->reset_pin = GPIO_PIN_NONE;
+	}
 
-	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+	data->dma_rx_periph_id = 3;
+	data->dma_tx_periph_id = 4;
+	data->dma_controller_id = 0;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct ac97c_platform_data)))
+		goto fail;
+
+	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
+	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
+	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
+	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
+
+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
+	if (data->reset_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->reset_pin, 0);
 
 	atmel_ac97c0_pclk.dev = &pdev->dev;
 
 	platform_device_add(pdev);
 	return pdev;
 
-err_add_resources:
+fail:
 	platform_device_put(pdev);
 	return NULL;
 }
@@ -2024,7 +2085,7 @@ struct clk *at32_clock_list[] = {
 	&pbb_clk,
 	&at32_pm_pclk,
 	&at32_intc0_pclk,
-	&hmatrix_clk,
+	&at32_hmatrix_clk,
 	&ebi_clk,
 	&hramc_clk,
 	&sdramc_clk,
@@ -2032,7 +2093,7 @@ struct clk *at32_clock_list[] = {
 	&smc0_mck,
 	&pdc_hclk,
 	&pdc_pclk,
-	&dmaca0_hclk,
+	&dw_dmac0_hclk,
 	&pico_clk,
 	&pio0_mck,
 	&pio1_mck,
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 4642117cc9a..6c27ddac5ad 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -16,6 +16,8 @@
 #include <linux/device.h>
 #include <linux/string.h>
 
+#include <mach/chip.h>
+
 #include "clock.h"
 
 static DEFINE_SPINLOCK(clk_lock);
diff --git a/arch/avr32/mach-at32ap/hmatrix.c b/arch/avr32/mach-at32ap/hmatrix.c
new file mode 100644
index 00000000000..48f5ede7746
--- /dev/null
+++ b/arch/avr32/mach-at32ap/hmatrix.c
@@ -0,0 +1,88 @@
+/*
+ * High-Speed Bus Matrix helper functions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/chip.h>
+#include <mach/hmatrix.h>
+
+static inline void __hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	__raw_writel(value, (void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+static inline u32 __hmatrix_read_reg(unsigned long offset)
+{
+	return __raw_readl((void __iomem __force *)(HMATRIX_BASE + offset));
+}
+
+/**
+ * hmatrix_write_reg - write HMATRIX configuration register
+ * @offset: register offset
+ * @value: value to be written to the register at @offset
+ */
+void hmatrix_write_reg(unsigned long offset, u32 value)
+{
+	clk_enable(&at32_hmatrix_clk);
+	__hmatrix_write_reg(offset, value);
+	__hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_read_reg - read HMATRIX configuration register
+ * @offset: register offset
+ *
+ * Returns the value of the register at @offset.
+ */
+u32 hmatrix_read_reg(unsigned long offset)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(offset);
+	clk_disable(&at32_hmatrix_clk);
+
+	return value;
+}
+
+/**
+ * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be set in the SFR
+ */
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value |= mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}
+
+/**
+ * hmatrix_sfr_set_bits - clear bits in a slave's Special Function Register
+ * @slave_id: operate on the SFR belonging to this slave
+ * @mask: mask of bits to be cleared in the SFR
+ */
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask)
+{
+	u32 value;
+
+	clk_enable(&at32_hmatrix_clk);
+	value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	value &= ~mask;
+	__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
+	__hmatrix_read_reg(HMATRIX_SFR(slave_id));
+	clk_disable(&at32_hmatrix_clk);
+}
diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h
deleted file mode 100644
index d10bfb60d68..00000000000
--- a/arch/avr32/mach-at32ap/hmatrix.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Register definitions for High-Speed Bus Matrix
- */
-#ifndef __HMATRIX_H
-#define __HMATRIX_H
-
-/* HMATRIX register offsets */
-#define HMATRIX_MCFG0				0x0000
-#define HMATRIX_MCFG1				0x0004
-#define HMATRIX_MCFG2				0x0008
-#define HMATRIX_MCFG3				0x000c
-#define HMATRIX_MCFG4				0x0010
-#define HMATRIX_MCFG5				0x0014
-#define HMATRIX_MCFG6				0x0018
-#define HMATRIX_MCFG7				0x001c
-#define HMATRIX_MCFG8				0x0020
-#define HMATRIX_MCFG9				0x0024
-#define HMATRIX_MCFG10				0x0028
-#define HMATRIX_MCFG11				0x002c
-#define HMATRIX_MCFG12				0x0030
-#define HMATRIX_MCFG13				0x0034
-#define HMATRIX_MCFG14				0x0038
-#define HMATRIX_MCFG15				0x003c
-#define HMATRIX_SCFG0				0x0040
-#define HMATRIX_SCFG1				0x0044
-#define HMATRIX_SCFG2				0x0048
-#define HMATRIX_SCFG3				0x004c
-#define HMATRIX_SCFG4				0x0050
-#define HMATRIX_SCFG5				0x0054
-#define HMATRIX_SCFG6				0x0058
-#define HMATRIX_SCFG7				0x005c
-#define HMATRIX_SCFG8				0x0060
-#define HMATRIX_SCFG9				0x0064
-#define HMATRIX_SCFG10				0x0068
-#define HMATRIX_SCFG11				0x006c
-#define HMATRIX_SCFG12				0x0070
-#define HMATRIX_SCFG13				0x0074
-#define HMATRIX_SCFG14				0x0078
-#define HMATRIX_SCFG15				0x007c
-#define HMATRIX_PRAS0				0x0080
-#define HMATRIX_PRBS0				0x0084
-#define HMATRIX_PRAS1				0x0088
-#define HMATRIX_PRBS1				0x008c
-#define HMATRIX_PRAS2				0x0090
-#define HMATRIX_PRBS2				0x0094
-#define HMATRIX_PRAS3				0x0098
-#define HMATRIX_PRBS3				0x009c
-#define HMATRIX_PRAS4				0x00a0
-#define HMATRIX_PRBS4				0x00a4
-#define HMATRIX_PRAS5				0x00a8
-#define HMATRIX_PRBS5				0x00ac
-#define HMATRIX_PRAS6				0x00b0
-#define HMATRIX_PRBS6				0x00b4
-#define HMATRIX_PRAS7				0x00b8
-#define HMATRIX_PRBS7				0x00bc
-#define HMATRIX_PRAS8				0x00c0
-#define HMATRIX_PRBS8				0x00c4
-#define HMATRIX_PRAS9				0x00c8
-#define HMATRIX_PRBS9				0x00cc
-#define HMATRIX_PRAS10				0x00d0
-#define HMATRIX_PRBS10				0x00d4
-#define HMATRIX_PRAS11				0x00d8
-#define HMATRIX_PRBS11				0x00dc
-#define HMATRIX_PRAS12				0x00e0
-#define HMATRIX_PRBS12				0x00e4
-#define HMATRIX_PRAS13				0x00e8
-#define HMATRIX_PRBS13				0x00ec
-#define HMATRIX_PRAS14				0x00f0
-#define HMATRIX_PRBS14				0x00f4
-#define HMATRIX_PRAS15				0x00f8
-#define HMATRIX_PRBS15				0x00fc
-#define HMATRIX_MRCR				0x0100
-#define HMATRIX_SFR0				0x0110
-#define HMATRIX_SFR1				0x0114
-#define HMATRIX_SFR2				0x0118
-#define HMATRIX_SFR3				0x011c
-#define HMATRIX_SFR4				0x0120
-#define HMATRIX_SFR5				0x0124
-#define HMATRIX_SFR6				0x0128
-#define HMATRIX_SFR7				0x012c
-#define HMATRIX_SFR8				0x0130
-#define HMATRIX_SFR9				0x0134
-#define HMATRIX_SFR10				0x0138
-#define HMATRIX_SFR11				0x013c
-#define HMATRIX_SFR12				0x0140
-#define HMATRIX_SFR13				0x0144
-#define HMATRIX_SFR14				0x0148
-#define HMATRIX_SFR15				0x014c
-
-/* Bitfields in MCFGx */
-#define HMATRIX_ULBT_OFFSET			0
-#define HMATRIX_ULBT_SIZE			3
-
-/* Bitfields in SCFGx */
-#define HMATRIX_SLOT_CYCLE_OFFSET		0
-#define HMATRIX_SLOT_CYCLE_SIZE			8
-#define HMATRIX_DEFMSTR_TYPE_OFFSET		16
-#define HMATRIX_DEFMSTR_TYPE_SIZE		2
-#define HMATRIX_FIXED_DEFMSTR_OFFSET		18
-#define HMATRIX_FIXED_DEFMSTR_SIZE		4
-#define HMATRIX_ARBT_OFFSET			24
-#define HMATRIX_ARBT_SIZE			2
-
-/* Bitfields in PRASx */
-#define HMATRIX_M0PR_OFFSET			0
-#define HMATRIX_M0PR_SIZE			4
-#define HMATRIX_M1PR_OFFSET			4
-#define HMATRIX_M1PR_SIZE			4
-#define HMATRIX_M2PR_OFFSET			8
-#define HMATRIX_M2PR_SIZE			4
-#define HMATRIX_M3PR_OFFSET			12
-#define HMATRIX_M3PR_SIZE			4
-#define HMATRIX_M4PR_OFFSET			16
-#define HMATRIX_M4PR_SIZE			4
-#define HMATRIX_M5PR_OFFSET			20
-#define HMATRIX_M5PR_SIZE			4
-#define HMATRIX_M6PR_OFFSET			24
-#define HMATRIX_M6PR_SIZE			4
-#define HMATRIX_M7PR_OFFSET			28
-#define HMATRIX_M7PR_SIZE			4
-
-/* Bitfields in PRBSx */
-#define HMATRIX_M8PR_OFFSET			0
-#define HMATRIX_M8PR_SIZE			4
-#define HMATRIX_M9PR_OFFSET			4
-#define HMATRIX_M9PR_SIZE			4
-#define HMATRIX_M10PR_OFFSET			8
-#define HMATRIX_M10PR_SIZE			4
-#define HMATRIX_M11PR_OFFSET			12
-#define HMATRIX_M11PR_SIZE			4
-#define HMATRIX_M12PR_OFFSET			16
-#define HMATRIX_M12PR_SIZE			4
-#define HMATRIX_M13PR_OFFSET			20
-#define HMATRIX_M13PR_SIZE			4
-#define HMATRIX_M14PR_OFFSET			24
-#define HMATRIX_M14PR_SIZE			4
-#define HMATRIX_M15PR_OFFSET			28
-#define HMATRIX_M15PR_SIZE			4
-
-/* Bitfields in SFR4 */
-#define HMATRIX_CS1A_OFFSET			1
-#define HMATRIX_CS1A_SIZE			1
-#define HMATRIX_CS3A_OFFSET			3
-#define HMATRIX_CS3A_SIZE			1
-#define HMATRIX_CS4A_OFFSET			4
-#define HMATRIX_CS4A_SIZE			1
-#define HMATRIX_CS5A_OFFSET			5
-#define HMATRIX_CS5A_SIZE			1
-#define HMATRIX_DBPUC_OFFSET			8
-#define HMATRIX_DBPUC_SIZE			1
-
-/* Constants for ULBT */
-#define HMATRIX_ULBT_INFINITE			0
-#define HMATRIX_ULBT_SINGLE			1
-#define HMATRIX_ULBT_FOUR_BEAT			2
-#define HMATRIX_ULBT_EIGHT_BEAT			3
-#define HMATRIX_ULBT_SIXTEEN_BEAT		4
-
-/* Constants for DEFMSTR_TYPE */
-#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT		0
-#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT	1
-#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT	2
-
-/* Constants for ARBT */
-#define HMATRIX_ARBT_ROUND_ROBIN		0
-#define HMATRIX_ARBT_FIXED_PRIORITY		1
-
-/* Bit manipulation macros */
-#define HMATRIX_BIT(name)					\
-	(1 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BF(name,value)					\
-	(((value) & ((1 << HMATRIX_##name##_SIZE) - 1))		\
-	 << HMATRIX_##name##_OFFSET)
-#define HMATRIX_BFEXT(name,value)				\
-	(((value) >> HMATRIX_##name##_OFFSET)			\
-	 & ((1 << HMATRIX_##name##_SIZE) - 1))
-#define HMATRIX_BFINS(name,value,old)				\
-	(((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1)		\
-		    << HMATRIX_##name##_OFFSET))		\
-	 | HMATRIX_BF(name,value))
-
-#endif /* __HMATRIX_H */
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index fa427ed4278..2875c11be95 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -14,7 +14,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 #include "hsmc.h"
 
@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
 {
 	return platform_driver_register(&hsmc_driver);
 }
-arch_initcall(hsmc_init);
+core_initcall(hsmc_init);
diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
new file mode 100644
index 00000000000..1e9852d65cc
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
@@ -0,0 +1,86 @@
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP700X_H__
+#define __ASM_ARCH_AT32AP700X_H__
+
+#define GPIO_PERIPH_A	0
+#define GPIO_PERIPH_B	1
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE	(0)
+#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
+
+#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
+
+
+/*
+ * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
+ */
+#define DMAC_MCI_RX		0
+#define DMAC_MCI_TX		1
+#define DMAC_DAC_TX		2
+#define DMAC_AC97_A_RX		3
+#define DMAC_AC97_A_TX		4
+#define DMAC_AC97_B_RX		5
+#define DMAC_AC97_B_TX		6
+#define DMAC_DMAREQ_0		7
+#define DMAC_DMAREQ_1		8
+#define DMAC_DMAREQ_2		9
+#define DMAC_DMAREQ_3		10
+
+/* HSB master IDs */
+#define HMATRIX_MASTER_CPU_DCACHE		0
+#define HMATRIX_MASTER_CPU_ICACHE		1
+#define HMATRIX_MASTER_PDC			2
+#define HMATRIX_MASTER_ISI			3
+#define HMATRIX_MASTER_USBA			4
+#define HMATRIX_MASTER_LCDC			5
+#define HMATRIX_MASTER_MACB0			6
+#define HMATRIX_MASTER_MACB1			7
+#define HMATRIX_MASTER_DMACA_M0			8
+#define HMATRIX_MASTER_DMACA_M1			9
+
+/* HSB slave IDs */
+#define HMATRIX_SLAVE_SRAM0			0
+#define HMATRIX_SLAVE_SRAM1			1
+#define HMATRIX_SLAVE_PBA			2
+#define HMATRIX_SLAVE_PBB			3
+#define HMATRIX_SLAVE_EBI			4
+#define HMATRIX_SLAVE_USBA			5
+#define HMATRIX_SLAVE_LCDC			6
+#define HMATRIX_SLAVE_DMACA			7
+
+/* Bits in HMATRIX SFR4 (EBI) */
+#define HMATRIX_EBI_SDRAM_ENABLE		(1 << 1)
+#define HMATRIX_EBI_NAND_ENABLE			(1 << 3)
+#define HMATRIX_EBI_CF0_ENABLE			(1 << 4)
+#define HMATRIX_EBI_CF1_ENABLE			(1 << 5)
+#define HMATRIX_EBI_PULLUP_DISABLE		(1 << 8)
+
+/*
+ * Base addresses of controllers that may be accessed early by
+ * platform code.
+ */
+#define PM_BASE		0xfff00000
+#define HMATRIX_BASE	0xfff00800
+#define SDRAMC_BASE	0xfff03800
+
+#endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
new file mode 100644
index 00000000000..e60e9076544
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -0,0 +1,121 @@
+/*
+ * Platform data definitions.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/types.h>
+
+#define GPIO_PIN_NONE	(-1)
+
+/*
+ * Clock rates for various on-board oscillators. The number of entries
+ * in this array is chip-dependent.
+ */
+extern unsigned long at32_board_osc_rates[];
+  
+/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+void at32_add_system_devices(void);
+
+#define ATMEL_MAX_UART	4
+extern struct platform_device *atmel_default_console_device;
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+void at32_map_usart(unsigned int hw_id, unsigned int line);
+struct platform_device *at32_add_device_usart(unsigned int id);
+
+struct eth_platform_data {
+	u32	phy_mask;
+	u8	is_rmii;
+};
+struct platform_device *
+at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+
+struct spi_board_info;
+struct platform_device *
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+
+struct atmel_lcdfb_info;
+struct platform_device *
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+		     unsigned long fbmem_start, unsigned long fbmem_len,
+		     unsigned int pin_config);
+
+struct usba_platform_data;
+struct platform_device *
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+
+struct ide_platform_data {
+	u8      cs;
+};
+struct platform_device *
+at32_add_device_ide(unsigned int id, unsigned int extint,
+		    struct ide_platform_data *data);
+
+/* mask says which PWM channels to mux */
+struct platform_device *at32_add_device_pwm(u32 mask);
+
+/* depending on what's hooked up, not all SSC pins will be used */
+#define	ATMEL_SSC_TK		0x01
+#define	ATMEL_SSC_TF		0x02
+#define	ATMEL_SSC_TD		0x04
+#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define	ATMEL_SSC_RK		0x10
+#define	ATMEL_SSC_RF		0x20
+#define	ATMEL_SSC_RD		0x40
+#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+struct platform_device *
+at32_add_device_ssc(unsigned int id, unsigned int flags);
+
+struct i2c_board_info;
+struct platform_device *at32_add_device_twi(unsigned int id,
+					    struct i2c_board_info *b,
+					    unsigned int n);
+
+struct mci_platform_data;
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
+struct ac97c_platform_data {
+	unsigned short dma_rx_periph_id;
+	unsigned short dma_tx_periph_id;
+	unsigned short dma_controller_id;
+	int reset_pin;
+};
+struct platform_device *
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
+
+struct platform_device *at32_add_device_abdac(unsigned int id);
+struct platform_device *at32_add_device_psif(unsigned int id);
+
+struct cf_platform_data {
+	int	detect_pin;
+	int	reset_pin;
+	int	vcc_pin;
+	int	ready_pin;
+	u8	cs;
+};
+struct platform_device *
+at32_add_device_cf(unsigned int id, unsigned int extint,
+		struct cf_platform_data *data);
+
+/* NAND / SmartMedia */
+struct atmel_nand_data {
+	int	enable_pin;	/* chip enable */
+	int	det_pin;	/* card detect */
+	int	rdy_pin;	/* ready/busy */
+	u8	ale;		/* address line number connected to ALE */
+	u8	cle;		/* address line number connected to CLE */
+	u8	bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+};
+struct platform_device *
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
+
+#endif /* __ASM_ARCH_BOARD_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h
new file mode 100644
index 00000000000..5efca6da6ac
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/chip.h
@@ -0,0 +1,19 @@
+/*
+ * AVR32 chip-specific definitions
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_CHIP_H__
+#define __ASM_AVR32_ARCH_CHIP_H__
+
+#if defined(CONFIG_CPU_AT32AP700X)
+# include <mach/at32ap700x.h>
+#else
+# error Unknown chip type selected
+#endif
+
+#endif /* __ASM_AVR32_ARCH_CHIP_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
new file mode 100644
index 00000000000..44d0bfa1f40
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
@@ -0,0 +1,35 @@
+/*
+ * AVR32 and (fake) AT91 CPU identification
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+/*
+ * Only AT32AP7000 is defined for now. We can identify the specific
+ * chip at runtime, but I'm not sure if it's really worth it.
+ */
+#ifdef CONFIG_CPU_AT32AP700X
+# define cpu_is_at32ap7000()	(1)
+#else
+# define cpu_is_at32ap7000()	(0)
+#endif
+
+/*
+ * Since this is AVR32, we will never run on any AT91 CPU. But these
+ * definitions may reduce clutter in common drivers.
+ */
+#define cpu_is_at91rm9200()	(0)
+#define cpu_is_at91sam9xe()	(0)
+#define cpu_is_at91sam9260()	(0)
+#define cpu_is_at91sam9261()	(0)
+#define cpu_is_at91sam9263()	(0)
+#define cpu_is_at91sam9rl()	(0)
+#define cpu_is_at91cap9()	(0)
+
+#endif /* __ASM_ARCH_CPU_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/gpio.h b/arch/avr32/mach-at32ap/include/mach/gpio.h
new file mode 100644
index 00000000000..0180f584ef0
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/gpio.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_AVR32_ARCH_GPIO_H
+#define __ASM_AVR32_ARCH_GPIO_H
+
+#include <linux/compiler.h>
+#include <asm/irq.h>
+
+
+/* Some GPIO chips can manage IRQs; some can't.  The exact numbers can
+ * be changed if needed, but for the moment they're not configurable.
+ */
+#define ARCH_NR_GPIOS	(NR_GPIO_IRQS + 2 * 32)
+
+
+/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	if (gpio < NR_GPIO_IRQS)
+		return gpio + GPIO_IRQ_BASE;
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return irq - GPIO_IRQ_BASE;
+}
+
+#endif /* __ASM_AVR32_ARCH_GPIO_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
new file mode 100644
index 00000000000..7a368f227eb
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h
@@ -0,0 +1,55 @@
+/*
+ * High-Speed Bus Matrix configuration registers
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __HMATRIX_H
+#define __HMATRIX_H
+
+extern struct clk at32_hmatrix_clk;
+
+void hmatrix_write_reg(unsigned long offset, u32 value);
+u32 hmatrix_read_reg(unsigned long offset);
+
+void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
+void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
+
+/* Master Configuration register */
+#define HMATRIX_MCFG(m)			(0x0000 + 4 * (m))
+/* Undefined length burst limit */
+# define HMATRIX_MCFG_ULBT_INFINITE	0	/* Infinite length */
+# define HMATRIX_MCFG_ULBT_SINGLE	1	/* Single Access */
+# define HMATRIX_MCFG_ULBT_FOUR_BEAT	2	/* Four beat */
+# define HMATRIX_MCFG_ULBT_EIGHT_BEAT	3	/* Eight beat */
+# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT	4	/* Sixteen beat */
+
+/* Slave Configuration register */
+#define HMATRIX_SCFG(s)			(0x0040 + 4 * (s))
+# define HMATRIX_SCFG_SLOT_CYCLE(x)	((x) <<  0)	/* Max burst cycles */
+# define HMATRIX_SCFG_DEFMSTR_NONE	(  0 << 16)	/* No default master */
+# define HMATRIX_SCFG_DEFMSTR_LAST	(  1 << 16)	/* Last def master */
+# define HMATRIX_SCFG_DEFMSTR_FIXED	(  2 << 16)	/* Fixed def master */
+# define HMATRIX_SCFG_FIXED_DEFMSTR(m)	((m) << 18)	/* Fixed master ID */
+# define HMATRIX_SCFG_ARBT_ROUND_ROBIN	(  0 << 24)	/* RR arbitration */
+# define HMATRIX_SCFG_ARBT_FIXED_PRIO	(  1 << 24)	/* Fixed priority */
+
+/* Slave Priority register A (master 0..7) */
+#define HMATRIX_PRAS(s)			(0x0080 + 8 * (s))
+# define HMATRIX_PRAS_PRIO(m, p)	((p) << ((m) * 4))
+
+/* Slave Priority register A (master 8..15) */
+#define HMATRIX_PRBS(s)			(0x0084 + 8 * (s))
+# define HMATRIX_PRBS_PRIO(m, p)	((p) << (((m) - 8) * 4))
+
+/* Master Remap Control Register */
+#define HMATRIX_MRCR				0x0100
+# define HMATRIX_MRCR_REMAP(m)		(  1 << (m))	/* Remap master m */
+
+/* Special Function Register. Bit definitions are chip-specific */
+#define HMATRIX_SFR(s)			(0x0110 + 4 * (s))
+
+#endif /* __HMATRIX_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h
new file mode 100644
index 00000000000..bc40e3d4615
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/init.h
@@ -0,0 +1,18 @@
+/*
+ * AT32AP platform initialization calls.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_AT32AP_INIT_H__
+#define __ASM_AVR32_AT32AP_INIT_H__
+
+void setup_platform(void);
+void setup_board(void);
+
+void at32_setup_serial_console(unsigned int usart_id);
+
+#endif /* __ASM_AVR32_AT32AP_INIT_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h
new file mode 100644
index 00000000000..4ec6abc68ea
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/io.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
+#define __ASM_AVR32_ARCH_AT32AP_IO_H
+
+/* For "bizarre" halfword swapping */
+#include <linux/byteorder/swabb.h>
+
+#if defined(CONFIG_AP700X_32_BIT_SMC)
+# define __swizzle_addr_b(addr)	(addr ^ 3UL)
+# define __swizzle_addr_w(addr)	(addr ^ 2UL)
+# define __swizzle_addr_l(addr)	(addr)
+# define ioswabb(a, x)		(x)
+# define ioswabw(a, x)		(x)
+# define ioswabl(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define __mem_ioswabw(a, x)	swab16(x)
+# define __mem_ioswabl(a, x)	swab32(x)
+#elif defined(CONFIG_AP700X_16_BIT_SMC)
+# define __swizzle_addr_b(addr)	(addr ^ 1UL)
+# define __swizzle_addr_w(addr)	(addr)
+# define __swizzle_addr_l(addr)	(addr)
+# define ioswabb(a, x)		(x)
+# define ioswabw(a, x)		(x)
+# define ioswabl(a, x)		swahw32(x)
+# define __mem_ioswabb(a, x)	(x)
+# define __mem_ioswabw(a, x)	swab16(x)
+# define __mem_ioswabl(a, x)	swahb32(x)
+#else
+# define __swizzle_addr_b(addr)	(addr)
+# define __swizzle_addr_w(addr)	(addr)
+# define __swizzle_addr_l(addr)	(addr)
+# define ioswabb(a, x)		(x)
+# define ioswabw(a, x)		swab16(x)
+# define ioswabl(a, x)		swab32(x)
+# define __mem_ioswabb(a, x)	(x)
+# define __mem_ioswabw(a, x)	(x)
+# define __mem_ioswabl(a, x)	(x)
+#endif
+
+#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h
new file mode 100644
index 00000000000..608e350368c
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/irq.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_AVR32_ARCH_IRQ_H
+#define __ASM_AVR32_ARCH_IRQ_H
+
+#define EIM_IRQ_BASE	NR_INTERNAL_IRQS
+#define NR_EIM_IRQS	32
+#define AT32_EXTINT(n)	(EIM_IRQ_BASE + (n))
+
+#define GPIO_IRQ_BASE	(EIM_IRQ_BASE + NR_EIM_IRQS)
+#define NR_GPIO_CTLR	(5 /*internal*/ + 1 /*external*/)
+#define NR_GPIO_IRQS	(NR_GPIO_CTLR * 32)
+
+#define NR_IRQS		(GPIO_IRQ_BASE + NR_GPIO_IRQS)
+
+#endif /* __ASM_AVR32_ARCH_IRQ_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h
new file mode 100644
index 00000000000..979b355b77b
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/pm.h
@@ -0,0 +1,51 @@
+/*
+ * AVR32 AP Power Management.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_PM_H
+#define __ASM_AVR32_ARCH_PM_H
+
+/* Possible arguments to the "sleep" instruction */
+#define CPU_SLEEP_IDLE		0
+#define CPU_SLEEP_FROZEN	1
+#define CPU_SLEEP_STANDBY	2
+#define CPU_SLEEP_STOP		3
+#define CPU_SLEEP_STATIC	5
+
+#ifndef __ASSEMBLY__
+extern void cpu_enter_idle(void);
+extern void cpu_enter_standby(unsigned long sdramc_base);
+
+extern bool disable_idle_sleep;
+
+static inline void cpu_disable_idle_sleep(void)
+{
+	disable_idle_sleep = true;
+}
+
+static inline void cpu_enable_idle_sleep(void)
+{
+	disable_idle_sleep = false;
+}
+
+static inline void cpu_idle_sleep(void)
+{
+	/*
+	 * If we're using the COUNT and COMPARE registers for
+	 * timekeeping, we can't use the IDLE state.
+	 */
+	if (disable_idle_sleep)
+		cpu_relax();
+	else
+		cpu_enter_idle();
+}
+
+void intc_set_suspend_handler(unsigned long offset);
+#endif
+
+#endif /* __ASM_AVR32_ARCH_PM_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
new file mode 100644
index 00000000000..b1abe6b4e4e
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
@@ -0,0 +1,29 @@
+/*
+ * AT32 portmux interface.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PORTMUX_H__
+#define __ASM_ARCH_PORTMUX_H__
+
+/*
+ * Set up pin multiplexing, called from board init only.
+ *
+ * The following flags determine the initial state of the pin.
+ */
+#define AT32_GPIOF_PULLUP	0x00000001	/* (not-OUT) Enable pull-up */
+#define AT32_GPIOF_OUTPUT	0x00000002	/* (OUT) Enable output driver */
+#define AT32_GPIOF_HIGH		0x00000004	/* (OUT) Set output high */
+#define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
+#define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
+
+void at32_select_periph(unsigned int pin, unsigned int periph,
+			unsigned long flags);
+void at32_select_gpio(unsigned int pin, unsigned long flags);
+void at32_reserve_pin(unsigned int pin);
+
+#endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/smc.h b/arch/avr32/mach-at32ap/include/mach/smc.h
new file mode 100644
index 00000000000..c98eea44a70
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/smc.h
@@ -0,0 +1,113 @@
+/*
+ * Static Memory Controller for AT32 chips
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Inspired by the OMAP2 General-Purpose Memory Controller interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_AT32AP_SMC_H
+#define __ARCH_AT32AP_SMC_H
+
+/*
+ * All timing parameters are in nanoseconds.
+ */
+struct smc_timing {
+	/* Delay from address valid to assertion of given strobe */
+	int ncs_read_setup;
+	int nrd_setup;
+	int ncs_write_setup;
+	int nwe_setup;
+
+	/* Pulse length of given strobe */
+	int ncs_read_pulse;
+	int nrd_pulse;
+	int ncs_write_pulse;
+	int nwe_pulse;
+
+	/* Total cycle length of given operation */
+	int read_cycle;
+	int write_cycle;
+
+	/* Minimal recovery times, will extend cycle if needed */
+	int ncs_read_recover;
+	int nrd_recover;
+	int ncs_write_recover;
+	int nwe_recover;
+};
+
+/*
+ * All timing parameters are in clock cycles.
+ */
+struct smc_config {
+
+	/* Delay from address valid to assertion of given strobe */
+	u8		ncs_read_setup;
+	u8		nrd_setup;
+	u8		ncs_write_setup;
+	u8		nwe_setup;
+
+	/* Pulse length of given strobe */
+	u8		ncs_read_pulse;
+	u8		nrd_pulse;
+	u8		ncs_write_pulse;
+	u8		nwe_pulse;
+
+	/* Total cycle length of given operation */
+	u8		read_cycle;
+	u8		write_cycle;
+
+	/* Bus width in bytes */
+	u8		bus_width;
+
+	/*
+	 * 0: Data is sampled on rising edge of NCS
+	 * 1: Data is sampled on rising edge of NRD
+	 */
+	unsigned int	nrd_controlled:1;
+
+	/*
+	 * 0: Data is driven on falling edge of NCS
+	 * 1: Data is driven on falling edge of NWR
+	 */
+	unsigned int	nwe_controlled:1;
+
+	/*
+	 * 0: NWAIT is disabled
+	 * 1: Reserved
+	 * 2: NWAIT is frozen mode
+	 * 3: NWAIT in ready mode
+	 */
+	unsigned int	nwait_mode:2;
+
+	/*
+	 * 0: Byte select access type
+	 * 1: Byte write access type
+	 */
+	unsigned int	byte_write:1;
+
+	/*
+	 * Number of clock cycles before data is released after
+	 * the rising edge of the read controlling signal
+	 *
+	 * Total cycles from SMC is tdf_cycles + 1
+	 */
+	unsigned int	tdf_cycles:4;
+
+	/*
+	 * 0: TDF optimization disabled
+	 * 1: TDF optimization enabled
+	 */
+	unsigned int	tdf_mode:1;
+};
+
+extern void smc_set_timing(struct smc_config *config,
+			   const struct smc_timing *timing);
+
+extern int smc_set_configuration(int cs, const struct smc_config *config);
+extern struct smc_config *smc_get_configuration(int cs);
+
+#endif /* __ARCH_AT32AP_SMC_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/sram.h b/arch/avr32/mach-at32ap/include/mach/sram.h
new file mode 100644
index 00000000000..4838dae7601
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/sram.h
@@ -0,0 +1,30 @@
+/*
+ * Simple SRAM allocator
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_SRAM_H
+#define __ASM_AVR32_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+extern struct gen_pool *sram_pool;
+
+static inline unsigned long sram_alloc(size_t len)
+{
+	if (!sram_pool)
+		return 0UL;
+
+	return gen_pool_alloc(sram_pool, len);
+}
+
+static inline void sram_free(unsigned long addr, size_t len)
+{
+	return gen_pool_free(sram_pool, addr, len);
+}
+
+#endif /* __ASM_AVR32_ARCH_SRAM_H */
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 60da03ba711..405ee6bad4c 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -17,7 +17,7 @@
 #include <asm/gpio.h>
 #include <asm/io.h>
 
-#include <asm/arch/portmux.h>
+#include <mach/portmux.h>
 
 #include "pio.h"
 
@@ -360,6 +360,8 @@ static int __init pio_probe(struct platform_device *pdev)
 	pio->chip.label = pio->name;
 	pio->chip.base = pdev->id * 32;
 	pio->chip.ngpio = 32;
+	pio->chip.dev = &pdev->dev;
+	pio->chip.owner = THIS_MODULE;
 
 	pio->chip.direction_input = direction_input;
 	pio->chip.get = gpio_get;
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
index 0a53ad314ff..17503b0ed6c 100644
--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -10,7 +10,7 @@
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 #include "pm.h"
 #include "sdramc.h"
@@ -134,7 +134,7 @@ pm_standby:
 	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
 	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
 	sync	0			/* flush write buffer */
-	st.w	r12[SDRAMC_LPR], r11	/* put SDRAM in self-refresh mode */
+	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
 	ld.w	r11, r12[SDRAMC_LPR]
 	unmask_interrupts
 	sleep	CPU_SLEEP_FROZEN
diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c
index 0b764320135..f021edfeaab 100644
--- a/arch/avr32/mach-at32ap/pm.c
+++ b/arch/avr32/mach-at32ap/pm.c
@@ -14,11 +14,9 @@
 #include <asm/cacheflush.h>
 #include <asm/sysreg.h>
 
-#include <asm/arch/pm.h>
-#include <asm/arch/sram.h>
-
-/* FIXME: This is only valid for AP7000 */
-#define SDRAMC_BASE	0xfff03800
+#include <mach/chip.h>
+#include <mach/pm.h>
+#include <mach/sram.h>
 
 #include "sdramc.h"
 
diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
index 694d521edc2..532a3732c21 100644
--- a/arch/avr32/mach-at32ap/pm.h
+++ b/arch/avr32/mach-at32ap/pm.h
@@ -4,14 +4,6 @@
 #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
 #define __ARCH_AVR32_MACH_AT32AP_PM_H__
 
-/*
- * We can reduce the code size a bit by using a constant here. Since
- * this file is only used on AVR32 AP CPUs with segmentation enabled,
- * it's safe to not use ioremap. Generic drivers should of course
- * never do this.
- */
-#define AT32_PM_BASE	0xfff00000
-
 /* PM register offsets */
 #define PM_MCCTRL				0x0000
 #define PM_CKSEL				0x0004
@@ -113,8 +105,8 @@
 
 /* Register access macros */
 #define pm_readl(reg)							\
-	__raw_readl((void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
 #define pm_writel(reg,value)						\
-	__raw_writel((value), (void __iomem __force *)AT32_PM_BASE + PM_##reg)
+	__raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
 
 #endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 3f90a87527b..fa92ff6d95f 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -38,45 +38,6 @@ EXPORT_SYMBOL(empty_zero_page);
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, cached = 0;
-	int slab = 0, free = 0, shared = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		struct page *page, *end;
-
-		page = pgdat->node_mem_map;
-		end = page + pgdat->node_spanned_pages;
-
-		do {
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
-	}
-
-	printk ("%d pages of RAM\n", total);
-	printk ("%d free pages\n", free);
-	printk ("%d reserved pages\n", reserved);
-	printk ("%d slab pages\n", slab);
-	printk ("%d pages shared\n", shared);
-	printk ("%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  *
@@ -119,8 +80,7 @@ void __init paging_init(void)
 		unsigned long zones_size[MAX_NR_ZONES];
 		unsigned long low, start_pfn;
 
-		start_pfn = pgdat->bdata->node_boot_start;
-		start_pfn >>= PAGE_SHIFT;
+		start_pfn = pgdat->bdata->node_min_pfn;
 		low = pgdat->bdata->node_low_pfn;
 
 		memset(zones_size, 0, sizeof(zones_size));
@@ -129,7 +89,7 @@ void __init paging_init(void)
 		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
 		       nid, start_pfn, low);
 
-		free_area_init_node(nid, pgdat, zones_size, start_pfn, NULL);
+		free_area_init_node(nid, zones_size, start_pfn, NULL);
 
 		printk("Node %u: mem_map starts at %p\n",
 		       pgdat->node_id, pgdat->node_mem_map);
diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c
index 3437c82434a..f03b79f0e0a 100644
--- a/arch/avr32/mm/ioremap.c
+++ b/arch/avr32/mm/ioremap.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/io.h>
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b87634e75f2..4154ff1101f 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -234,7 +234,7 @@ config MEM_MT48LC16M16A2TG_75
 	bool
 	depends on (BFIN533_EZKIT || BFIN561_EZKIT \
 		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
-		|| H8606_HVSISTEMAS)
+		|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -249,7 +249,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X)
+	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
 source "arch/blackfin/mach-bf527/Kconfig"
@@ -292,7 +292,7 @@ config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	default "10000000" if BFIN532_IP0X
@@ -310,25 +310,6 @@ config BFIN_KERNEL_CLOCK
 	  are also not changed, and the Bootloader does 100% of the hardware
 	  configuration.
 
-config MEM_SIZE
-	int "SDRAM Memory Size in MBytes"
-	depends on BFIN_KERNEL_CLOCK
-	default 64
-
-config MEM_ADD_WIDTH
-	int "Memory Address Width"
-	depends on BFIN_KERNEL_CLOCK
-	depends on (!BF54x)
-	range 8 11
-	default  9 if BFIN533_EZKIT
-	default  9 if BFIN561_EZKIT
-	default  9 if H8606_HVSISTEMAS
-	default 10 if BFIN527_EZKIT
-	default 10 if BFIN537_STAMP
-	default 11 if BFIN533_STAMP
-	default 10 if PNAV10
-	default 10 if BFIN532_IP0X
-
 config PLL_BYPASS
 	bool "Bypass PLL"
 	depends on BFIN_KERNEL_CLOCK
@@ -349,10 +330,9 @@ config VCO_MULT
 	default "45" if BFIN533_STAMP
 	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
 	default "22" if BFIN533_BLUETECHNIX_CM
-	default "20" if BFIN537_BLUETECHNIX_CM
-	default "20" if BFIN561_BLUETECHNIX_CM
+	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
-	default "16" if H8606_HVSISTEMAS
+	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP)
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -390,7 +370,7 @@ config SCLK_DIV
 
 config MAX_MEM_SIZE
 	int "Max SDRAM Memory Size in MBytes"
-	depends on !BFIN_KERNEL_CLOCK && !MPU
+	depends on !MPU
 	default 512
 	help
 	  This is the max memory size that the kernel will create CPLB
@@ -642,6 +622,33 @@ config CPLB_SWITCH_TAB_L1
 	  If enabled, the CPLB Switch Tables are linked
 	  into L1 data memory. (less latency)
 
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+	bool "ins[bwl] low overhead, higher interrupt latency"
+	default y
+	help
+	  Reads on the Blackfin are speculative. In Blackfin terms, this means
+	  they can be interrupted at any time (even after they have been issued
+	  on to the external bus), and re-issued after the interrupt occurs.
+	  For memory - this is not a big deal, since memory does not change if
+	  it sees a read.
+
+	  If a FIFO is sitting on the end of the read, it will see two reads,
+	  when the core only sees one since the FIFO receives both the read
+	  which is cancelled (and not delivered to the core) and the one which
+	  is re-issued (which is delivered to the core).
+
+	  To solve this, interrupts are turned off before reads occur to
+	  I/O space. This option controls which the overhead/latency of
+	  controlling interrupts during this time
+	   "n" turns interrupts off every read
+		(higher overhead, but lower interrupt latency)
+	   "y" turns interrupts off every loop
+		(low overhead, but longer interrupt latency)
+
+	  default behavior is to leave this set to on (type "Y"). If you are experiencing
+	  interrupt latency issues, it is safe and OK to turn this off.
+
 endmenu
 
 
@@ -748,14 +755,6 @@ config BFIN_WT
 
 endchoice
 
-config L1_MAX_PIECE
-	int "Set the max L1 SRAM pieces"
-	default 16
-	help
-	  Set the max memory pieces for the L1 SRAM allocation algorithm.
-	  Min value is 16. Max value is 1024.
-
-
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n
@@ -856,6 +855,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 
 config PCI
 	bool "PCI support"
+	depends on BROKEN
 	help
 	  Support for PCI bus.
 
@@ -873,8 +873,8 @@ config HOTPLUG
 	  plugged into slots found on all modern laptop computers.  Another
 	  example, used on modern desktops as well as laptops, is USB.
 
-	  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-	  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	  Enable HOTPLUG and build a modular kernel.  Get agent software
+	  (from <http://linux-hotplug.sourceforge.net/>) and install it.
 	  Then your kernel will automatically call out to a user mode "policy
 	  agent" (/sbin/hotplug) to load modules and set up software needed
 	  to use devices as you hotplug them.
@@ -899,7 +899,7 @@ config ARCH_SUSPEND_POSSIBLE
 	depends on !SMP
 
 choice
-	prompt "Default Power Saving Mode"
+	prompt "Standby Power Saving Mode"
 	depends on PM
 	default PM_BFIN_SLEEP_DEEPER
 config  PM_BFIN_SLEEP_DEEPER
@@ -918,6 +918,8 @@ config  PM_BFIN_SLEEP_DEEPER
 	  normal during Sleep Deeper, due to the reduced SCLK frequency.
 	  When in the sleep mode, system DMA access to L1 memory is not supported.
 
+	  If unsure, select "Sleep Deeper".
+
 config  PM_BFIN_SLEEP
 	bool "Sleep"
 	help
@@ -925,15 +927,17 @@ config  PM_BFIN_SLEEP
 	  dissipation by disabling the clock to the processor core (CCLK).
 	  The PLL and system clock (SCLK), however, continue to operate in
 	  this mode. Typically an external event or RTC activity will wake
-	  up the processor. When in the sleep mode,
-	  system DMA access to L1 memory is not supported.
+	  up the processor. When in the sleep mode, system DMA access to L1
+	  memory is not supported.
+
+	  If unsure, select "Sleep Deeper".
 endchoice
 
 config PM_WAKEUP_BY_GPIO
-	bool "Cause Wakeup Event by GPIO"
+	bool "Allow Wakeup from Standby by GPIO"
 
 config PM_WAKEUP_GPIO_NUMBER
-	int "Wakeup GPIO number"
+	int "GPIO number"
 	range 0 47
 	depends on PM_WAKEUP_BY_GPIO
 	default 2 if BFIN537_STAMP
@@ -954,6 +958,22 @@ config  PM_WAKEUP_GPIO_POLAR_EDGE_B
 	bool "Both EDGE"
 endchoice
 
+comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
+	depends on PM
+
+config PM_BFIN_WAKE_PH6
+	bool "Allow Wake-Up from on-chip PHY or PH6 GP"
+	depends on PM && (BF52x || BF534 || BF536 || BF537)
+	default n
+	help
+	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_GP
+	bool "Allow Wake-Up from GPIOs"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index c61bdebb997..c468624d55f 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -154,13 +154,6 @@ config EARLY_PRINTK
 	  all of this lives in the init section and is thrown away after the
 	  kernel boots completely.
 
-config DUAL_CORE_TEST_MODULE
-	tristate "Dual Core Test Module"
-	depends on (BF561)
-	default n
-	help
-	  Say Y here to build-in dual core test module for dual core test.
-
 config CPLB_INFO
 	bool "Display the CPLB information"
 	help
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 3cbe16caad4..eac0533d6e4 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -6,8 +6,9 @@
 # for more details.
 #
 
-
-CROSS_COMPILE    ?= bfin-uclinux-
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE    := bfin-uclinux-
+endif
 LDFLAGS_vmlinux  := -X
 OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
 GZFLAGS          := -9
@@ -97,36 +98,20 @@ libs-y   += arch/$(ARCH)/lib/
 
 drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 
+machdirs	:= $(patsubst %,arch/blackfin/mach-%/, $(machine-y))
 
+KBUILD_CFLAGS += -Iarch/$(ARCH)/include/
+KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include
 
-#	Update machine arch symlinks if something which affects
-#	them changed.  We use .mach to indicate when they were updated
-#	last, otherwise make uses the target directory mtime.
-
-       show_mach_symlink = :
- quiet_show_mach_symlink = echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
-silent_show_mach_symlink = :
-include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@$($(quiet)show_mach_symlink)
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-$(ARCH)
-	$(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
-else
-	$(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach
-endif
-	@touch $@
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
 
 CLEAN_FILES += \
-	include/asm-$(ARCH)/asm-offsets.h \
+	arch/$(ARCH)/include/asm/asm-offsets.h \
 	arch/$(ARCH)/kernel/asm-offsets.s \
-	include/asm-$(ARCH)/mach \
-	include/asm-$(ARCH)/.mach
 
-archprepare: include/asm-blackfin/.mach
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
 BOOT_TARGETS = vmImage
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 5e6fb9d8e50..66854a83c0d 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.24.7
-# Fri May 16 10:02:29 2008
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -290,7 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -430,7 +429,58 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -689,8 +739,11 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_VT is not set
+CONFIG_SIMPLE_GPIO=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -872,8 +925,36 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_BFIN_T350MCQB=y
+# CONFIG_FB_BFIN_7393 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_LTV350QV=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
 
 #
 # Display device support
@@ -881,9 +962,99 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_LOGO_BLACKFIN_CLUT224=y
+
+#
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SPI devices
+#
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BLACKFIN_AD1836_TDM is not set
+# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
+# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set
+# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SSM2602=m
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+CONFIG_SND_SOC_AD1980=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 8d817ba0194..6bc11db1269 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_BFIN533_EZKIT=y
 # CONFIG_BFIN533_STAMP is not set
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=27000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,13 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -250,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -293,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -321,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -367,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -393,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -428,6 +422,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -457,6 +452,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -465,14 +461,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -492,6 +485,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -548,20 +542,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -571,10 +553,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -582,32 +562,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -624,15 +601,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -647,7 +616,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -672,13 +640,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -706,28 +673,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -748,22 +698,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -780,72 +745,27 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -862,10 +782,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -875,8 +791,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -885,22 +803,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -945,7 +850,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -971,10 +875,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -983,10 +889,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1006,17 +909,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1057,21 +955,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1079,6 +972,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1098,11 +992,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1113,6 +1003,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 20d598d17bd..d77d991a1f6 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC64M4A2FB_7E=y
 # CONFIG_BFIN533_EZKIT is not set
 CONFIG_BFIN533_STAMP=y
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=11059200
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,14 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=11
-CONFIG_ENET_FLASH_PIN=0
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -251,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -294,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -322,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -368,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -394,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -429,6 +422,9 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -458,6 +454,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -466,14 +463,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -493,6 +487,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -524,11 +519,7 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
+CONFIG_MTD_BFIN_ASYNC=m
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -555,20 +546,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -578,10 +557,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -589,32 +566,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -631,15 +605,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -654,7 +620,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -667,14 +632,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 
 #
 # Hardware I/O ports
@@ -687,15 +646,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -723,28 +680,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -764,6 +704,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -771,14 +712,15 @@ CONFIG_I2C_ALGOBIT=m
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -801,14 +743,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -816,12 +755,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -836,13 +775,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -852,6 +794,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -863,24 +819,20 @@ CONFIG_HWMON=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -895,7 +847,7 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -905,9 +857,14 @@ CONFIG_NTSC=y
 # CONFIG_PAL_YCBCR is not set
 CONFIG_ADV7393_1XMEM=y
 # CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -941,6 +898,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 CONFIG_SND_BLACKFIN_AD1836=m
@@ -953,69 +914,43 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
 #
-# CONFIG_SND_SOC is not set
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 
 #
-# Open Sound System
+# SoC Audio support for SuperH
 #
-# CONFIG_SOUND_PRIME is not set
+CONFIG_SND_SOC_AD1980=m
 
 #
-# HID Devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1035,6 +970,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1042,6 +978,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1053,8 +990,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1063,22 +1002,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1123,7 +1049,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1149,10 +1074,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1161,10 +1088,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1184,17 +1108,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1235,21 +1154,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1257,6 +1171,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1276,11 +1191,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1291,6 +1202,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index b5189c8ba26..5fd7c4b143d 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +132,6 @@ CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -197,12 +187,14 @@ CONFIG_IRQ_PROG_INTA=12
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -216,13 +208,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -258,12 +254,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -301,17 +299,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -329,7 +323,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -375,6 +371,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -401,10 +398,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -436,6 +429,10 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR1=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -465,6 +462,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -473,14 +471,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -500,6 +495,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -572,20 +568,8 @@ CONFIG_MTD_NAND_IDS=m
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -595,10 +579,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -606,22 +588,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -635,21 +613,24 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +647,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +662,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -702,14 +674,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 
 #
 # Hardware I/O ports
@@ -722,15 +688,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -766,28 +730,11 @@ CONFIG_CAN4LINUX=y
 # CONFIG_CAN_MCF5282 is not set
 # CONFIG_CAN_UNCTWINCAN is not set
 CONFIG_CAN_BLACKFIN=m
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -809,6 +756,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -816,14 +764,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_AD5252=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -846,14 +795,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -861,12 +807,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -881,13 +827,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -897,6 +846,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -913,21 +876,15 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -942,7 +899,8 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_HITACHI_TX09 is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -956,10 +914,18 @@ CONFIG_FB_BF537_LQ035=m
 CONFIG_LQ035_SLAVE_ADDR=0x58
 # CONFIG_FB_BFIN_LANDSCAPE is not set
 # CONFIG_FB_BFIN_BGR is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_HITACHI_TX09 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CORGI=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -993,6 +959,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 CONFIG_SND_BLACKFIN_AD1836=m
@@ -1005,6 +975,10 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
@@ -1016,9 +990,14 @@ CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_BF5xx=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
 CONFIG_SND_SOC_AD1980=m
 
 #
@@ -1026,59 +1005,18 @@ CONFIG_SND_SOC_AD1980=m
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_NO_DUMMY_DELAY is not set
+# CONFIG_DUMMY_DELAY_BANK0 is not set
+# CONFIG_DUMMY_DELAY_BANK1 is not set
+# CONFIG_DUMMY_DELAY_BANK2 is not set
+# CONFIG_DUMMY_DELAY_BANK3 is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1098,6 +1036,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1105,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1116,8 +1056,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1126,22 +1068,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1186,7 +1115,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1212,10 +1140,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1224,10 +1154,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1247,17 +1174,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1298,21 +1220,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1320,6 +1237,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1339,11 +1257,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1354,6 +1268,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 1ff2ff4b49a..390669e8668 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -365,7 +365,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -468,7 +468,60 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+# CONFIG_BFIN_SIR0 is not set
+# CONFIG_BFIN_SIR2 is not set
+CONFIG_BFIN_SIR3=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -575,6 +628,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BF5XX=y
 CONFIG_MTD_NAND_BF5XX_HWECC=y
+# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
@@ -766,7 +820,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
@@ -1071,6 +1125,7 @@ CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SPORT_NUM=0
 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
 CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
@@ -1133,7 +1188,7 @@ CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
+CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_LOGLEVEL=0
 
@@ -1312,7 +1367,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index b4a20c89081..976a4d7ba17 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -140,7 +131,6 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BFIN_DUAL_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_SPORT0_ERROR=7
@@ -233,12 +223,14 @@ CONFIG_IRQ_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=30000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -252,13 +244,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -294,12 +290,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -341,17 +339,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -367,9 +361,15 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -405,6 +405,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -431,10 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -466,6 +463,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -495,6 +493,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -503,14 +502,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -530,6 +526,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -590,20 +587,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -613,10 +598,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -624,32 +607,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +646,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +661,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -714,13 +685,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -748,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -789,22 +743,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -821,91 +790,33 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -950,7 +861,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -976,10 +886,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -988,10 +900,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1011,17 +920,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1062,21 +966,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1084,6 +983,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1104,11 +1004,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1119,6 +1015,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
new file mode 100644
index 00000000000..2921f9952d5
--- /dev/null
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -0,0 +1,1195 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.2
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+CONFIG_BF532=y
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
+CONFIG_BLACKSTAMP=y
+# CONFIG_GENERIC_BF533_BOARD is not set
+
+#
+# BF533/2/1 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_UART_ERROR=7
+CONFIG_SPORT0_ERROR=7
+CONFIG_SPI_ERROR=7
+CONFIG_SPORT1_ERROR=7
+CONFIG_PPI_ERROR=7
+CONFIG_DMA_ERROR=7
+CONFIG_PLLWAKE_ERROR=7
+CONFIG_RTC_ERROR=8
+CONFIG_DMA0_PPI=8
+CONFIG_DMA1_SPORT0RX=9
+CONFIG_DMA2_SPORT0TX=9
+CONFIG_DMA3_SPORT1RX=9
+CONFIG_DMA4_SPORT1TX=9
+CONFIG_DMA5_SPI=10
+CONFIG_DMA6_UARTRX=10
+CONFIG_DMA7_UARTTX=10
+CONFIG_TIMER0=11
+CONFIG_TIMER1=11
+CONFIG_TIMER2=11
+CONFIG_PFA=12
+CONFIG_PFB=12
+CONFIG_MEMDMA0=13
+CONFIG_MEMDMA1=13
+CONFIG_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+# CONFIG_PLL_BYPASS is not set
+# CONFIG_CLKIN_HALF is not set
+CONFIG_VCO_MULT=16
+CONFIG_CCLK_DIV_1=y
+# CONFIG_CCLK_DIV_2 is not set
+# CONFIG_CCLK_DIV_4 is not set
+# CONFIG_CCLK_DIV_8 is not set
+CONFIG_SCLK_DIV=3
+CONFIG_MAX_MEM_SIZE=64
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Memory Setup
+#
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+# CONFIG_RAMKERNEL is not set
+CONFIG_ROMKERNEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xAAC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# Possible Suspend Mem / Hibernate Wake-Up Sources
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+CONFIG_BF5xx_PPI=y
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SPI=y
+# CONFIG_SPI_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
new file mode 100644
index 00000000000..0799aa9bba9
--- /dev/null
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -0,0 +1,1185 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Fri Jul 18 18:00:41 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+CONFIG_BF527=y
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF52x=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_BLUETECHNIX_CM=y
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC0
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_BLACKFIN_TWI=m
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CPLB_INFO is not set
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 560890fe0d3..09deea44480 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -291,7 +292,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -617,8 +618,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -778,7 +778,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -866,11 +866,11 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 9f66d2de100..219fc345a5f 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -299,7 +300,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -351,7 +352,10 @@ CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -645,8 +649,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +809,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +897,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 2694d06c5bd..9873d586fc7 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -298,8 +299,8 @@ CONFIG_C_AMBEN_ALL=y
 #
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0xFFC3
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_2=0xFFC2
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -628,8 +629,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +806,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +894,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 90207251c53..0e3605fdb7b 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -363,7 +363,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -744,8 +744,8 @@ CONFIG_BFIN_OTP=y
 #
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
-CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
 # CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_BFIN_UART1_CTSRTS is not set
@@ -1149,7 +1149,7 @@ CONFIG_RTC_DRV_BFIN=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1332,7 +1332,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index daf00906c1e..59c7cdbee90 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -35,7 +35,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 CONFIG_FAIR_GROUP_SCHED=y
@@ -341,7 +342,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -631,8 +632,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -756,7 +756,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -830,12 +830,12 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 679c7483ea7..ba0bee90b7e 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -967,7 +967,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 4384a670a8b..285d2241df2 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -1066,7 +1066,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 87622ad9df4..bffca7de65d 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -294,7 +294,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x33B0
 CONFIG_BANK_2=0x33B0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -1080,7 +1080,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 951ea041257..b1309f878fc 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -1067,7 +1067,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
new file mode 100644
index 00000000000..c482ee171f9
--- /dev/null
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -0,0 +1,693 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Thu Jul 31 00:53:15 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+CONFIG_BF537=y
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+# CONFIG_BFIN537_STAMP is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+CONFIG_BFIN537_BLUETECHNIX_TCM=y
+# CONFIG_PNAV10 is not set
+# CONFIG_CAMSIG_MINOTAUR is not set
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=32
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_CACHELINE_ALIGNED_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/include/asm/.gitignore b/arch/blackfin/include/asm/.gitignore
new file mode 100644
index 00000000000..7858564a446
--- /dev/null
+++ b/arch/blackfin/include/asm/.gitignore
@@ -0,0 +1 @@
++mach
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
new file mode 100644
index 00000000000..606ecfdcc96
--- /dev/null
+++ b/arch/blackfin/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+unifdef-y += fixed_code.h
diff --git a/arch/blackfin/include/asm/a.out.h b/arch/blackfin/include/asm/a.out.h
new file mode 100644
index 00000000000..6c3d652ebd3
--- /dev/null
+++ b/arch/blackfin/include/asm/a.out.h
@@ -0,0 +1,19 @@
+#ifndef __BFIN_A_OUT_H__
+#define __BFIN_A_OUT_H__
+
+struct exec {
+	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file, in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif				/* __BFIN_A_OUT_H__ */
diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h
new file mode 100644
index 00000000000..7cf50871860
--- /dev/null
+++ b/arch/blackfin/include/asm/atomic.h
@@ -0,0 +1,144 @@
+#ifndef __ARCH_BLACKFIN_ATOMIC__
+#define __ARCH_BLACKFIN_ATOMIC__
+
+#include <asm/system.h>	/* local_irq_XXX() */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * Generally we do not concern about SMP BFIN systems, so we don't have
+ * to deal with that.
+ *
+ * Tony Kou (tonyko@lineo.ca)   Lineo Inc.   2001
+ */
+
+typedef struct {
+	int counter;
+} atomic_t;
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+	long flags;
+
+	local_irq_save(flags);
+	v->counter += i;
+	local_irq_restore(flags);
+}
+
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+	long flags;
+
+	local_irq_save(flags);
+	v->counter -= i;
+	local_irq_restore(flags);
+
+}
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+	int __temp = 0;
+	long flags;
+
+	local_irq_save(flags);
+	v->counter += i;
+	__temp = v->counter;
+	local_irq_restore(flags);
+
+
+	return __temp;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+	int __temp = 0;
+	long flags;
+
+	local_irq_save(flags);
+	v->counter -= i;
+	__temp = v->counter;
+	local_irq_restore(flags);
+
+	return __temp;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t * v)
+{
+	long flags;
+
+	local_irq_save(flags);
+	v->counter++;
+	local_irq_restore(flags);
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#define atomic_add_unless(v, a, u)				\
+({								\
+	int c, old;						\
+	c = atomic_read(v);					\
+	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+		c = old;					\
+	c != (u);						\
+})
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static __inline__ void atomic_dec(volatile atomic_t * v)
+{
+	long flags;
+
+	local_irq_save(flags);
+	v->counter--;
+	local_irq_restore(flags);
+}
+
+static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t * v)
+{
+	long flags;
+
+	local_irq_save(flags);
+	v->counter &= ~mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void atomic_set_mask(unsigned int mask, atomic_t * v)
+{
+	long flags;
+
+	local_irq_save(flags);
+	v->counter |= mask;
+	local_irq_restore(flags);
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+#include <asm-generic/atomic.h>
+
+#endif				/* __ARCH_BLACKFIN_ATOMIC __ */
diff --git a/arch/blackfin/include/asm/auxvec.h b/arch/blackfin/include/asm/auxvec.h
new file mode 100644
index 00000000000..215506cd87b
--- /dev/null
+++ b/arch/blackfin/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMBFIN_AUXVEC_H
+#define __ASMBFIN_AUXVEC_H
+
+#endif
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
new file mode 100644
index 00000000000..7ba70de66f2
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -0,0 +1,117 @@
+/*
+ * File:         include/asm-blackfin/bfin-global.h
+ * Based on:
+ * Author: *
+ * Created:
+ * Description:  Global extern defines for blackfin
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _BFIN_GLOBAL_H_
+#define _BFIN_GLOBAL_H_
+
+#ifndef __ASSEMBLY__
+
+#include <asm-generic/sections.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+#if defined(CONFIG_DMA_UNCACHED_4M)
+# define DMA_UNCACHED_REGION (4 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_2M)
+# define DMA_UNCACHED_REGION (2 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_1M)
+# define DMA_UNCACHED_REGION (1024 * 1024)
+#else
+# define DMA_UNCACHED_REGION (0)
+#endif
+
+extern unsigned long get_cclk(void);
+extern unsigned long get_sclk(void);
+extern unsigned long sclk_to_usecs(unsigned long sclk);
+extern unsigned long usecs_to_sclk(unsigned long usecs);
+
+extern void dump_bfin_process(struct pt_regs *regs);
+extern void dump_bfin_mem(struct pt_regs *regs);
+extern void dump_bfin_trace_buffer(void);
+
+/* init functions only */
+extern int init_arch_irq(void);
+extern void bfin_icache_init(void);
+extern void bfin_dcache_init(void);
+extern void init_exception_vectors(void);
+extern void program_IAR(void);
+
+extern void bfin_reset(void);
+extern asmlinkage void lower_to_irq14(void);
+extern asmlinkage void bfin_return_from_exception(void);
+extern asmlinkage void evt14_softirq(void);
+extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
+extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
+
+extern void *l1_data_A_sram_alloc(size_t);
+extern void *l1_data_B_sram_alloc(size_t);
+extern void *l1_inst_sram_alloc(size_t);
+extern void *l1_data_sram_alloc(size_t);
+extern void *l1_data_sram_zalloc(size_t);
+extern void *l2_sram_alloc(size_t);
+extern void *l2_sram_zalloc(size_t);
+extern int l1_data_A_sram_free(const void*);
+extern int l1_data_B_sram_free(const void*);
+extern int l1_inst_sram_free(const void*);
+extern int l1_data_sram_free(const void*);
+extern int l2_sram_free(const void *);
+extern int sram_free(const void*);
+
+#define L1_INST_SRAM		0x00000001
+#define L1_DATA_A_SRAM		0x00000002
+#define L1_DATA_B_SRAM		0x00000004
+#define L1_DATA_SRAM		0x00000006
+#define L2_SRAM			0x00000008
+extern void *sram_alloc_with_lsl(size_t, unsigned long);
+extern int sram_free_with_lsl(const void*);
+
+extern const char bfin_board_name[];
+
+extern unsigned long bfin_sic_iwr[];
+extern unsigned vr_wakeup;
+extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
+extern unsigned long _ramstart, _ramend, _rambase;
+extern unsigned long memory_start, memory_end, physical_mem_end;
+extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[],
+	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
+	_ebss_l2[], _l2_lma_start[];
+
+/* only used when CONFIG_MTD_UCLINUX */
+extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+#ifdef CONFIG_BFIN_ICACHE_LOCK
+extern void cache_grab_lock(int way);
+extern void cache_lock(int way);
+#endif
+
+#endif
+
+#endif				/* _BLACKFIN_H_ */
diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
new file mode 100644
index 00000000000..9fa19158e38
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -0,0 +1,137 @@
+/************************************************************
+
+* Copyright (C) 2006-2008, Analog Devices. All Rights Reserved
+*
+* FILE bfin5xx_spi.h
+* PROGRAMMER(S): Luke Yang (Analog Devices Inc.)
+*
+*
+* DATE OF CREATION: March. 10th 2006
+*
+* SYNOPSIS:
+*
+* DESCRIPTION: header file for SPI controller driver for Blackfin5xx.
+**************************************************************
+
+* MODIFICATION HISTORY:
+* March 10, 2006  bfin5xx_spi.h Created. (Luke Yang)
+
+************************************************************/
+
+#ifndef _SPI_CHANNEL_H_
+#define _SPI_CHANNEL_H_
+
+#define SPI_READ              0
+#define SPI_WRITE             1
+
+#define SPI_CTRL_OFF            0x0
+#define SPI_FLAG_OFF            0x4
+#define SPI_STAT_OFF            0x8
+#define SPI_TXBUFF_OFF          0xc
+#define SPI_RXBUFF_OFF          0x10
+#define SPI_BAUD_OFF            0x14
+#define SPI_SHAW_OFF            0x18
+
+
+#define BIT_CTL_ENABLE      0x4000
+#define BIT_CTL_OPENDRAIN   0x2000
+#define BIT_CTL_MASTER      0x1000
+#define BIT_CTL_POLAR       0x0800
+#define BIT_CTL_PHASE       0x0400
+#define BIT_CTL_BITORDER    0x0200
+#define BIT_CTL_WORDSIZE    0x0100
+#define BIT_CTL_MISOENABLE  0x0020
+#define BIT_CTL_RXMOD       0x0000
+#define BIT_CTL_TXMOD       0x0001
+#define BIT_CTL_TIMOD_DMA_TX 0x0003
+#define BIT_CTL_TIMOD_DMA_RX 0x0002
+#define BIT_CTL_SENDOPT     0x0004
+#define BIT_CTL_TIMOD       0x0003
+
+#define BIT_STAT_SPIF       0x0001
+#define BIT_STAT_MODF       0x0002
+#define BIT_STAT_TXE        0x0004
+#define BIT_STAT_TXS        0x0008
+#define BIT_STAT_RBSY       0x0010
+#define BIT_STAT_RXS        0x0020
+#define BIT_STAT_TXCOL      0x0040
+#define BIT_STAT_CLR        0xFFFF
+
+#define BIT_STU_SENDOVER    0x0001
+#define BIT_STU_RECVFULL    0x0020
+
+#define CFG_SPI_ENABLE      1
+#define CFG_SPI_DISABLE     0
+
+#define CFG_SPI_OUTENABLE   1
+#define CFG_SPI_OUTDISABLE  0
+
+#define CFG_SPI_ACTLOW      1
+#define CFG_SPI_ACTHIGH     0
+
+#define CFG_SPI_PHASESTART  1
+#define CFG_SPI_PHASEMID    0
+
+#define CFG_SPI_MASTER      1
+#define CFG_SPI_SLAVE       0
+
+#define CFG_SPI_SENELAST    0
+#define CFG_SPI_SENDZERO    1
+
+#define CFG_SPI_RCVFLUSH    1
+#define CFG_SPI_RCVDISCARD  0
+
+#define CFG_SPI_LSBFIRST    1
+#define CFG_SPI_MSBFIRST    0
+
+#define CFG_SPI_WORDSIZE16  1
+#define CFG_SPI_WORDSIZE8   0
+
+#define CFG_SPI_MISOENABLE   1
+#define CFG_SPI_MISODISABLE  0
+
+#define CFG_SPI_READ      0x00
+#define CFG_SPI_WRITE     0x01
+#define CFG_SPI_DMAREAD   0x02
+#define CFG_SPI_DMAWRITE  0x03
+
+#define CFG_SPI_CSCLEARALL  0
+#define CFG_SPI_CHIPSEL1    1
+#define CFG_SPI_CHIPSEL2    2
+#define CFG_SPI_CHIPSEL3    3
+#define CFG_SPI_CHIPSEL4    4
+#define CFG_SPI_CHIPSEL5    5
+#define CFG_SPI_CHIPSEL6    6
+#define CFG_SPI_CHIPSEL7    7
+
+#define CFG_SPI_CS1VALUE    1
+#define CFG_SPI_CS2VALUE    2
+#define CFG_SPI_CS3VALUE    3
+#define CFG_SPI_CS4VALUE    4
+#define CFG_SPI_CS5VALUE    5
+#define CFG_SPI_CS6VALUE    6
+#define CFG_SPI_CS7VALUE    7
+
+#define CMD_SPI_SET_BAUDRATE  2
+#define CMD_SPI_GET_SYSTEMCLOCK   25
+#define CMD_SPI_SET_WRITECONTINUOUS     26
+
+/* device.platform_data for SSP controller devices */
+struct bfin5xx_spi_master {
+	u16 num_chipselect;
+	u8 enable_dma;
+	u16 pin_req[4];
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct bfin5xx_spi_chip {
+	u16 ctl_reg;
+	u8 enable_dma;
+	u8 bits_per_word;
+	u8 cs_change_per_word;
+	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
+};
+
+#endif /* _SPI_CHANNEL_H_ */
diff --git a/arch/blackfin/include/asm/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h
new file mode 100644
index 00000000000..fccbb595464
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_simple_timer.h
@@ -0,0 +1,13 @@
+#ifndef _bfin_simple_timer_h_
+#define _bfin_simple_timer_h_
+
+#include <linux/ioctl.h>
+
+#define BFIN_SIMPLE_TIMER_IOCTL_MAGIC 't'
+
+#define BFIN_SIMPLE_TIMER_SET_PERIOD _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  2)
+#define BFIN_SIMPLE_TIMER_START      _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  6)
+#define BFIN_SIMPLE_TIMER_STOP       _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC,  8)
+#define BFIN_SIMPLE_TIMER_READ       _IO (BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10)
+
+#endif
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
new file mode 100644
index 00000000000..c76ed8def30
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -0,0 +1,175 @@
+/*
+ * File:         include/asm-blackfin/bfin_sport.h
+ * Based on:
+ * Author:       Roy Huang (roy.huang@analog.com)
+ *
+ * Created:      Thu Aug. 24 2006
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __BFIN_SPORT_H__
+#define __BFIN_SPORT_H__
+
+#define SPORT_MAJOR	237
+#define SPORT_NR_DEVS	2
+
+/* Sport mode: it can be set to TDM, i2s or others */
+#define NORM_MODE	0x0
+#define TDM_MODE	0x1
+#define I2S_MODE	0x2
+
+/* Data format, normal, a-law or u-law */
+#define NORM_FORMAT	0x0
+#define ALAW_FORMAT	0x2
+#define ULAW_FORMAT	0x3
+struct sport_register;
+
+/* Function driver which use sport must initialize the structure */
+struct sport_config {
+	/*TDM (multichannels), I2S or other mode */
+	unsigned int mode:3;
+
+	/* if TDM mode is selected, channels must be set */
+	int channels;		/* Must be in 8 units */
+	unsigned int frame_delay:4;	/* Delay between frame sync pulse and first bit */
+
+	/* I2S mode */
+	unsigned int right_first:1;	/* Right stereo channel first */
+
+	/* In mormal mode, the following item need to be set */
+	unsigned int lsb_first:1;	/* order of transmit or receive data */
+	unsigned int fsync:1;	/* Frame sync required */
+	unsigned int data_indep:1;	/* data independent frame sync generated */
+	unsigned int act_low:1;	/* Active low TFS */
+	unsigned int late_fsync:1;	/* Late frame sync */
+	unsigned int tckfe:1;
+	unsigned int sec_en:1;	/* Secondary side enabled */
+
+	/* Choose clock source */
+	unsigned int int_clk:1;	/* Internal or external clock */
+
+	/* If external clock is used, the following fields are ignored */
+	int serial_clk;
+	int fsync_clk;
+
+	unsigned int data_format:2;	/*Normal, u-law or a-law */
+
+	int word_len;		/* How length of the word in bits, 3-32 bits */
+	int dma_enabled;
+};
+
+struct sport_register {
+	unsigned short tcr1;
+	unsigned short reserved0;
+	unsigned short tcr2;
+	unsigned short reserved1;
+	unsigned short tclkdiv;
+	unsigned short reserved2;
+	unsigned short tfsdiv;
+	unsigned short reserved3;
+	unsigned long tx;
+	unsigned long reserved_l0;
+	unsigned long rx;
+	unsigned long reserved_l1;
+	unsigned short rcr1;
+	unsigned short reserved4;
+	unsigned short rcr2;
+	unsigned short reserved5;
+	unsigned short rclkdiv;
+	unsigned short reserved6;
+	unsigned short rfsdiv;
+	unsigned short reserved7;
+	unsigned short stat;
+	unsigned short reserved8;
+	unsigned short chnl;
+	unsigned short reserved9;
+	unsigned short mcmc1;
+	unsigned short reserved10;
+	unsigned short mcmc2;
+	unsigned short reserved11;
+	unsigned long mtcs0;
+	unsigned long mtcs1;
+	unsigned long mtcs2;
+	unsigned long mtcs3;
+	unsigned long mrcs0;
+	unsigned long mrcs1;
+	unsigned long mrcs2;
+	unsigned long mrcs3;
+};
+
+#define SPORT_IOC_MAGIC		'P'
+#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+
+/* Test purpose */
+#define ENABLE_AD73311		_IOWR('P', 0x02, int)
+
+struct sport_dev {
+	struct cdev cdev;	/* Char device structure */
+
+	int sport_num;
+
+	int dma_rx_chan;
+	int dma_tx_chan;
+
+	int rx_irq;
+	unsigned char *rx_buf;	/* Buffer store the received data */
+	int rx_len;		/* How many bytes will be received */
+	int rx_received;	/* How many bytes has been received */
+
+	int tx_irq;
+	const unsigned char *tx_buf;
+	int tx_len;
+	int tx_sent;
+
+	int sport_err_irq;
+
+	struct mutex mutex;	/* mutual exclusion semaphore */
+	struct task_struct *task;
+
+	wait_queue_head_t waitq;
+	int	wait_con;
+	struct sport_register *regs;
+	struct sport_config config;
+};
+
+#define SPORT_TCR1	0
+#define	SPORT_TCR2	1
+#define	SPORT_TCLKDIV	2
+#define	SPORT_TFSDIV	3
+#define	SPORT_RCR1	8
+#define	SPORT_RCR2	9
+#define SPORT_RCLKDIV	10
+#define	SPORT_RFSDIV	11
+#define SPORT_CHANNEL	13
+#define SPORT_MCMC1	14
+#define SPORT_MCMC2	15
+#define SPORT_MTCS0	16
+#define SPORT_MTCS1	17
+#define SPORT_MTCS2	18
+#define SPORT_MTCS3	19
+#define SPORT_MRCS0	20
+#define SPORT_MRCS1	21
+#define SPORT_MRCS2	22
+#define SPORT_MRCS3	23
+
+#endif				/*__BFIN_SPORT_H__*/
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
new file mode 100644
index 00000000000..b39a175c79c
--- /dev/null
+++ b/arch/blackfin/include/asm/bitops.h
@@ -0,0 +1,218 @@
+#ifndef _BLACKFIN_BITOPS_H
+#define _BLACKFIN_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>	/* swab32 */
+#include <asm/system.h>		/* save_flags */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+static __inline__ void set_bit(int nr, volatile unsigned long *addr)
+{
+	int *a = (int *)addr;
+	int mask;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a |= mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void __set_bit(int nr, volatile unsigned long *addr)
+{
+	int *a = (int *)addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a |= mask;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
+{
+	int *a = (int *)addr;
+	int mask;
+	unsigned long flags;
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a &= ~mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	int *a = (int *)addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a &= ~mask;
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long *addr)
+{
+	int mask, flags;
+	unsigned long *ADDR = (unsigned long *)addr;
+
+	ADDR += nr >> 5;
+	mask = 1 << (nr & 31);
+	local_irq_save(flags);
+	*ADDR ^= mask;
+	local_irq_restore(flags);
+}
+
+static __inline__ void __change_bit(int nr, volatile unsigned long *addr)
+{
+	int mask;
+	unsigned long *ADDR = (unsigned long *)addr;
+
+	ADDR += nr >> 5;
+	mask = 1 << (nr & 31);
+	*ADDR ^= mask;
+}
+
+static __inline__ int test_and_set_bit(int nr, void *addr)
+{
+	int mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *)addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static __inline__ int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	int mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *)addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	return retval;
+}
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *)addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	int mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *)addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	return retval;
+}
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	int mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *)addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static __inline__ int __test_and_change_bit(int nr,
+					    volatile unsigned long *addr)
+{
+	int mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *)addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	return retval;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const void *addr)
+{
+	return ((1UL << (nr & 31)) &
+		(((const volatile unsigned int *)addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const void *addr)
+{
+	int *a = (int *)addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#include <asm-generic/bitops/minix.h>
+
+#endif				/* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif				/* _BLACKFIN_BITOPS_H */
diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h
new file mode 100644
index 00000000000..8749b0e321a
--- /dev/null
+++ b/arch/blackfin/include/asm/blackfin.h
@@ -0,0 +1,92 @@
+/*
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _BLACKFIN_H_
+#define _BLACKFIN_H_
+
+#define LO(con32) ((con32) & 0xFFFF)
+#define lo(con32) ((con32) & 0xFFFF)
+#define HI(con32) (((con32) >> 16) & 0xFFFF)
+#define hi(con32) (((con32) >> 16) & 0xFFFF)
+
+#include <mach/anomaly.h>
+
+#ifndef __ASSEMBLY__
+
+/* SSYNC implementation for C file */
+static inline void SSYNC(void)
+{
+	int _tmp;
+	if (ANOMALY_05000312)
+		__asm__ __volatile__(
+			"cli %0;"
+			"nop;"
+			"nop;"
+			"ssync;"
+			"sti %0;"
+			: "=d" (_tmp)
+		);
+	else if (ANOMALY_05000244)
+		__asm__ __volatile__(
+			"nop;"
+			"nop;"
+			"nop;"
+			"ssync;"
+		);
+	else
+		__asm__ __volatile__("ssync;");
+}
+
+/* CSYNC implementation for C file */
+static inline void CSYNC(void)
+{
+	int _tmp;
+	if (ANOMALY_05000312)
+		__asm__ __volatile__(
+			"cli %0;"
+			"nop;"
+			"nop;"
+			"csync;"
+			"sti %0;"
+			: "=d" (_tmp)
+		);
+	else if (ANOMALY_05000244)
+		__asm__ __volatile__(
+			"nop;"
+			"nop;"
+			"nop;"
+			"csync;"
+		);
+	else
+		__asm__ __volatile__("csync;");
+}
+
+#else  /* __ASSEMBLY__ */
+
+/* SSYNC & CSYNC implementations for assembly files */
+
+#define ssync(x) SSYNC(x)
+#define csync(x) CSYNC(x)
+
+#if ANOMALY_05000312
+#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
+#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
+
+#elif ANOMALY_05000244
+#define SSYNC(scratch) nop; nop; nop; SSYNC;
+#define CSYNC(scratch) nop; nop; nop; CSYNC;
+
+#else
+#define SSYNC(scratch) SSYNC;
+#define CSYNC(scratch) CSYNC;
+
+#endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */
+
+#endif /* __ASSEMBLY__ */
+
+#include <mach/blackfin.h>
+#include <asm/bfin-global.h>
+
+#endif				/* _BLACKFIN_H_ */
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
new file mode 100644
index 00000000000..6d3e11b1fc5
--- /dev/null
+++ b/arch/blackfin/include/asm/bug.h
@@ -0,0 +1,17 @@
+#ifndef _BLACKFIN_BUG_H
+#define _BLACKFIN_BUG_H
+
+#ifdef CONFIG_BUG
+#define HAVE_ARCH_BUG
+
+#define BUG() do { \
+	dump_bfin_trace_buffer(); \
+	printk(KERN_EMERG "BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
+	panic("BUG!"); \
+} while (0)
+
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/blackfin/include/asm/bugs.h b/arch/blackfin/include/asm/bugs.h
new file mode 100644
index 00000000000..9093c9c1fb8
--- /dev/null
+++ b/arch/blackfin/include/asm/bugs.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-blackfin/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h
new file mode 100644
index 00000000000..6a673d42da1
--- /dev/null
+++ b/arch/blackfin/include/asm/byteorder.h
@@ -0,0 +1,48 @@
+#ifndef _BLACKFIN_BYTEORDER_H
+#define _BLACKFIN_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u32 ___arch__swahb32(__u32 xx)
+{
+	__u32 tmp;
+	__asm__("%1 = %0 >> 8 (V);\n\t"
+		"%0 = %0 << 8 (V);\n\t"
+		"%0 = %0 | %1;\n\t"
+		: "+d"(xx), "=&d"(tmp));
+	return xx;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swahw32(__u32 xx)
+{
+	__u32 rv;
+	__asm__("%0 = PACK(%1.L, %1.H);\n\t": "=d"(rv): "d"(xx));
+	return rv;
+}
+
+#define __arch__swahb32(x) ___arch__swahb32(x)
+#define __arch__swahw32(x) ___arch__swahw32(x)
+#define __arch__swab32(x) ___arch__swahb32(___arch__swahw32(x))
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 xx)
+{
+	__u32 xw = xx;
+	__asm__("%0 <<= 8;\n	%0.L = %0.L + %0.H (NS);\n": "+d"(xw));
+	return (__u16)xw;
+}
+
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#endif
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/little_endian.h>
+
+#endif				/* _BLACKFIN_BYTEORDER_H */
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
new file mode 100644
index 00000000000..023d72133b5
--- /dev/null
+++ b/arch/blackfin/include/asm/cache.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-blackfin/cache.h
+ */
+#ifndef __ARCH_BLACKFIN_CACHE_H
+#define __ARCH_BLACKFIN_CACHE_H
+
+/*
+ * Bytes per L1 cache line
+ * Blackfin loads 32 bytes for cache
+ */
+#define L1_CACHE_SHIFT	5
+#define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
+#define SMP_CACHE_BYTES	L1_CACHE_BYTES
+
+/*
+ * Put cacheline_aliged data to L1 data memory
+ */
+#ifdef CONFIG_CACHELINE_ALIGNED_L1
+#define __cacheline_aligned				\
+	  __attribute__((__aligned__(L1_CACHE_BYTES),	\
+		__section__(".data_l1.cacheline_aligned")))
+#endif
+
+/*
+ * largest L1 which this arch supports
+ */
+#define L1_CACHE_SHIFT_MAX	5
+
+#endif
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
new file mode 100644
index 00000000000..d81a77545a0
--- /dev/null
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -0,0 +1,90 @@
+/*
+ * File:         include/asm-blackfin/cacheflush.h
+ * Based on:	 include/asm-m68knommu/cacheflush.h
+ * Author:       LG Soft India
+ *               Copyright (C) 2004 Analog Devices Inc.
+ * Created:      Tue Sep 21 2004
+ * Description:  Blackfin low-level cache routines adapted from the i386
+ * 		 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BLACKFIN_CACHEFLUSH_H
+#define _BLACKFIN_CACHEFLUSH_H
+
+#include <asm/cplb.h>
+
+extern void blackfin_icache_dcache_flush_range(unsigned int, unsigned int);
+extern void blackfin_icache_flush_range(unsigned int, unsigned int);
+extern void blackfin_dcache_flush_range(unsigned int, unsigned int);
+extern void blackfin_dcache_invalidate_range(unsigned int, unsigned int);
+extern void blackfin_dflush_page(void *);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+static inline void flush_icache_range(unsigned start, unsigned end)
+{
+#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_ICACHE)
+
+# if defined(CONFIG_BFIN_WT)
+	blackfin_icache_flush_range((start), (end));
+# else
+	blackfin_icache_dcache_flush_range((start), (end));
+# endif
+
+#else
+
+# if defined(CONFIG_BFIN_ICACHE)
+	blackfin_icache_flush_range((start), (end));
+# endif
+# if defined(CONFIG_BFIN_DCACHE)
+	blackfin_dcache_flush_range((start), (end));
+# endif
+
+#endif
+}
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_range ((unsigned) (dst), (unsigned) (dst) + (len)); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	memcpy(dst, src, len)
+
+#if defined(CONFIG_BFIN_DCACHE)
+# define invalidate_dcache_range(start,end)	blackfin_dcache_invalidate_range((start), (end))
+#else
+# define invalidate_dcache_range(start,end)	do { } while (0)
+#endif
+#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB)
+# define flush_dcache_range(start,end)		blackfin_dcache_flush_range((start), (end))
+# define flush_dcache_page(page)			blackfin_dflush_page(page_address(page))
+#else
+# define flush_dcache_range(start,end)		do { } while (0)
+# define flush_dcache_page(page)			do { } while (0)
+#endif
+
+#endif				/* _BLACKFIN_ICACHEFLUSH_H */
diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
new file mode 100644
index 00000000000..35f841bce57
--- /dev/null
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -0,0 +1,328 @@
+ /*
+  * File:        include/asm-blackfin/mach-common/cdef_LPBlackfin.h
+  * Based on:
+  * Author:      unknown
+  *              COPYRIGHT 2005 Analog Devices
+  * Created:     ?
+  * Description:
+  *
+  * Modified:
+  *
+  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2, or (at your option)
+  * any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program; see the file COPYING.
+  * If not, write to the Free Software Foundation,
+  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+  */
+
+#ifndef _CDEF_LPBLACKFIN_H
+#define _CDEF_LPBLACKFIN_H
+
+/*#if !defined(__ADSPLPBLACKFIN__)
+#warning cdef_LPBlackfin.h should only be included for 532 compatible chips.
+#endif
+*/
+#include <asm/def_LPBlackfin.h>
+
+/*Cache & SRAM Memory*/
+#define bfin_read_SRAM_BASE_ADDRESS()        bfin_read32(SRAM_BASE_ADDRESS)
+#define bfin_write_SRAM_BASE_ADDRESS(val)    bfin_write32(SRAM_BASE_ADDRESS,val)
+#define bfin_read_DMEM_CONTROL()             bfin_read32(DMEM_CONTROL)
+#define bfin_write_DMEM_CONTROL(val)         bfin_write32(DMEM_CONTROL,val)
+#define bfin_read_DCPLB_STATUS()             bfin_read32(DCPLB_STATUS)
+#define bfin_write_DCPLB_STATUS(val)         bfin_write32(DCPLB_STATUS,val)
+#define bfin_read_DCPLB_FAULT_ADDR()         bfin_read32(DCPLB_FAULT_ADDR)
+#define bfin_write_DCPLB_FAULT_ADDR(val)     bfin_write32(DCPLB_FAULT_ADDR,val)
+/*
+#define MMR_TIMEOUT            0xFFE00010
+*/
+#define bfin_read_DCPLB_ADDR0()              bfin_read32(DCPLB_ADDR0)
+#define bfin_write_DCPLB_ADDR0(val)          bfin_write32(DCPLB_ADDR0,val)
+#define bfin_read_DCPLB_ADDR1()              bfin_read32(DCPLB_ADDR1)
+#define bfin_write_DCPLB_ADDR1(val)          bfin_write32(DCPLB_ADDR1,val)
+#define bfin_read_DCPLB_ADDR2()              bfin_read32(DCPLB_ADDR2)
+#define bfin_write_DCPLB_ADDR2(val)          bfin_write32(DCPLB_ADDR2,val)
+#define bfin_read_DCPLB_ADDR3()              bfin_read32(DCPLB_ADDR3)
+#define bfin_write_DCPLB_ADDR3(val)          bfin_write32(DCPLB_ADDR3,val)
+#define bfin_read_DCPLB_ADDR4()              bfin_read32(DCPLB_ADDR4)
+#define bfin_write_DCPLB_ADDR4(val)          bfin_write32(DCPLB_ADDR4,val)
+#define bfin_read_DCPLB_ADDR5()              bfin_read32(DCPLB_ADDR5)
+#define bfin_write_DCPLB_ADDR5(val)          bfin_write32(DCPLB_ADDR5,val)
+#define bfin_read_DCPLB_ADDR6()              bfin_read32(DCPLB_ADDR6)
+#define bfin_write_DCPLB_ADDR6(val)          bfin_write32(DCPLB_ADDR6,val)
+#define bfin_read_DCPLB_ADDR7()              bfin_read32(DCPLB_ADDR7)
+#define bfin_write_DCPLB_ADDR7(val)          bfin_write32(DCPLB_ADDR7,val)
+#define bfin_read_DCPLB_ADDR8()              bfin_read32(DCPLB_ADDR8)
+#define bfin_write_DCPLB_ADDR8(val)          bfin_write32(DCPLB_ADDR8,val)
+#define bfin_read_DCPLB_ADDR9()              bfin_read32(DCPLB_ADDR9)
+#define bfin_write_DCPLB_ADDR9(val)          bfin_write32(DCPLB_ADDR9,val)
+#define bfin_read_DCPLB_ADDR10()             bfin_read32(DCPLB_ADDR10)
+#define bfin_write_DCPLB_ADDR10(val)         bfin_write32(DCPLB_ADDR10,val)
+#define bfin_read_DCPLB_ADDR11()             bfin_read32(DCPLB_ADDR11)
+#define bfin_write_DCPLB_ADDR11(val)         bfin_write32(DCPLB_ADDR11,val)
+#define bfin_read_DCPLB_ADDR12()             bfin_read32(DCPLB_ADDR12)
+#define bfin_write_DCPLB_ADDR12(val)         bfin_write32(DCPLB_ADDR12,val)
+#define bfin_read_DCPLB_ADDR13()             bfin_read32(DCPLB_ADDR13)
+#define bfin_write_DCPLB_ADDR13(val)         bfin_write32(DCPLB_ADDR13,val)
+#define bfin_read_DCPLB_ADDR14()             bfin_read32(DCPLB_ADDR14)
+#define bfin_write_DCPLB_ADDR14(val)         bfin_write32(DCPLB_ADDR14,val)
+#define bfin_read_DCPLB_ADDR15()             bfin_read32(DCPLB_ADDR15)
+#define bfin_write_DCPLB_ADDR15(val)         bfin_write32(DCPLB_ADDR15,val)
+#define bfin_read_DCPLB_DATA0()              bfin_read32(DCPLB_DATA0)
+#define bfin_write_DCPLB_DATA0(val)          bfin_write32(DCPLB_DATA0,val)
+#define bfin_read_DCPLB_DATA1()              bfin_read32(DCPLB_DATA1)
+#define bfin_write_DCPLB_DATA1(val)          bfin_write32(DCPLB_DATA1,val)
+#define bfin_read_DCPLB_DATA2()              bfin_read32(DCPLB_DATA2)
+#define bfin_write_DCPLB_DATA2(val)          bfin_write32(DCPLB_DATA2,val)
+#define bfin_read_DCPLB_DATA3()              bfin_read32(DCPLB_DATA3)
+#define bfin_write_DCPLB_DATA3(val)          bfin_write32(DCPLB_DATA3,val)
+#define bfin_read_DCPLB_DATA4()              bfin_read32(DCPLB_DATA4)
+#define bfin_write_DCPLB_DATA4(val)          bfin_write32(DCPLB_DATA4,val)
+#define bfin_read_DCPLB_DATA5()              bfin_read32(DCPLB_DATA5)
+#define bfin_write_DCPLB_DATA5(val)          bfin_write32(DCPLB_DATA5,val)
+#define bfin_read_DCPLB_DATA6()              bfin_read32(DCPLB_DATA6)
+#define bfin_write_DCPLB_DATA6(val)          bfin_write32(DCPLB_DATA6,val)
+#define bfin_read_DCPLB_DATA7()              bfin_read32(DCPLB_DATA7)
+#define bfin_write_DCPLB_DATA7(val)          bfin_write32(DCPLB_DATA7,val)
+#define bfin_read_DCPLB_DATA8()              bfin_read32(DCPLB_DATA8)
+#define bfin_write_DCPLB_DATA8(val)          bfin_write32(DCPLB_DATA8,val)
+#define bfin_read_DCPLB_DATA9()              bfin_read32(DCPLB_DATA9)
+#define bfin_write_DCPLB_DATA9(val)          bfin_write32(DCPLB_DATA9,val)
+#define bfin_read_DCPLB_DATA10()             bfin_read32(DCPLB_DATA10)
+#define bfin_write_DCPLB_DATA10(val)         bfin_write32(DCPLB_DATA10,val)
+#define bfin_read_DCPLB_DATA11()             bfin_read32(DCPLB_DATA11)
+#define bfin_write_DCPLB_DATA11(val)         bfin_write32(DCPLB_DATA11,val)
+#define bfin_read_DCPLB_DATA12()             bfin_read32(DCPLB_DATA12)
+#define bfin_write_DCPLB_DATA12(val)         bfin_write32(DCPLB_DATA12,val)
+#define bfin_read_DCPLB_DATA13()             bfin_read32(DCPLB_DATA13)
+#define bfin_write_DCPLB_DATA13(val)         bfin_write32(DCPLB_DATA13,val)
+#define bfin_read_DCPLB_DATA14()             bfin_read32(DCPLB_DATA14)
+#define bfin_write_DCPLB_DATA14(val)         bfin_write32(DCPLB_DATA14,val)
+#define bfin_read_DCPLB_DATA15()             bfin_read32(DCPLB_DATA15)
+#define bfin_write_DCPLB_DATA15(val)         bfin_write32(DCPLB_DATA15,val)
+#define bfin_read_DTEST_COMMAND()            bfin_read32(DTEST_COMMAND)
+#define bfin_write_DTEST_COMMAND(val)        bfin_write32(DTEST_COMMAND,val)
+/*
+#define DTEST_INDEX            0xFFE00304
+*/
+#define bfin_read_DTEST_DATA0()              bfin_read32(DTEST_DATA0)
+#define bfin_write_DTEST_DATA0(val)          bfin_write32(DTEST_DATA0,val)
+#define bfin_read_DTEST_DATA1()              bfin_read32(DTEST_DATA1)
+#define bfin_write_DTEST_DATA1(val)          bfin_write32(DTEST_DATA1,val)
+/*
+#define DTEST_DATA2            0xFFE00408
+#define DTEST_DATA3            0xFFE0040C
+*/
+#define bfin_read_IMEM_CONTROL()             bfin_read32(IMEM_CONTROL)
+#define bfin_write_IMEM_CONTROL(val)         bfin_write32(IMEM_CONTROL,val)
+#define bfin_read_ICPLB_STATUS()             bfin_read32(ICPLB_STATUS)
+#define bfin_write_ICPLB_STATUS(val)         bfin_write32(ICPLB_STATUS,val)
+#define bfin_read_ICPLB_FAULT_ADDR()         bfin_read32(ICPLB_FAULT_ADDR)
+#define bfin_write_ICPLB_FAULT_ADDR(val)     bfin_write32(ICPLB_FAULT_ADDR,val)
+#define bfin_read_ICPLB_ADDR0()              bfin_read32(ICPLB_ADDR0)
+#define bfin_write_ICPLB_ADDR0(val)          bfin_write32(ICPLB_ADDR0,val)
+#define bfin_read_ICPLB_ADDR1()              bfin_read32(ICPLB_ADDR1)
+#define bfin_write_ICPLB_ADDR1(val)          bfin_write32(ICPLB_ADDR1,val)
+#define bfin_read_ICPLB_ADDR2()              bfin_read32(ICPLB_ADDR2)
+#define bfin_write_ICPLB_ADDR2(val)          bfin_write32(ICPLB_ADDR2,val)
+#define bfin_read_ICPLB_ADDR3()              bfin_read32(ICPLB_ADDR3)
+#define bfin_write_ICPLB_ADDR3(val)          bfin_write32(ICPLB_ADDR3,val)
+#define bfin_read_ICPLB_ADDR4()              bfin_read32(ICPLB_ADDR4)
+#define bfin_write_ICPLB_ADDR4(val)          bfin_write32(ICPLB_ADDR4,val)
+#define bfin_read_ICPLB_ADDR5()              bfin_read32(ICPLB_ADDR5)
+#define bfin_write_ICPLB_ADDR5(val)          bfin_write32(ICPLB_ADDR5,val)
+#define bfin_read_ICPLB_ADDR6()              bfin_read32(ICPLB_ADDR6)
+#define bfin_write_ICPLB_ADDR6(val)          bfin_write32(ICPLB_ADDR6,val)
+#define bfin_read_ICPLB_ADDR7()              bfin_read32(ICPLB_ADDR7)
+#define bfin_write_ICPLB_ADDR7(val)          bfin_write32(ICPLB_ADDR7,val)
+#define bfin_read_ICPLB_ADDR8()              bfin_read32(ICPLB_ADDR8)
+#define bfin_write_ICPLB_ADDR8(val)          bfin_write32(ICPLB_ADDR8,val)
+#define bfin_read_ICPLB_ADDR9()              bfin_read32(ICPLB_ADDR9)
+#define bfin_write_ICPLB_ADDR9(val)          bfin_write32(ICPLB_ADDR9,val)
+#define bfin_read_ICPLB_ADDR10()             bfin_read32(ICPLB_ADDR10)
+#define bfin_write_ICPLB_ADDR10(val)         bfin_write32(ICPLB_ADDR10,val)
+#define bfin_read_ICPLB_ADDR11()             bfin_read32(ICPLB_ADDR11)
+#define bfin_write_ICPLB_ADDR11(val)         bfin_write32(ICPLB_ADDR11,val)
+#define bfin_read_ICPLB_ADDR12()             bfin_read32(ICPLB_ADDR12)
+#define bfin_write_ICPLB_ADDR12(val)         bfin_write32(ICPLB_ADDR12,val)
+#define bfin_read_ICPLB_ADDR13()             bfin_read32(ICPLB_ADDR13)
+#define bfin_write_ICPLB_ADDR13(val)         bfin_write32(ICPLB_ADDR13,val)
+#define bfin_read_ICPLB_ADDR14()             bfin_read32(ICPLB_ADDR14)
+#define bfin_write_ICPLB_ADDR14(val)         bfin_write32(ICPLB_ADDR14,val)
+#define bfin_read_ICPLB_ADDR15()             bfin_read32(ICPLB_ADDR15)
+#define bfin_write_ICPLB_ADDR15(val)         bfin_write32(ICPLB_ADDR15,val)
+#define bfin_read_ICPLB_DATA0()              bfin_read32(ICPLB_DATA0)
+#define bfin_write_ICPLB_DATA0(val)          bfin_write32(ICPLB_DATA0,val)
+#define bfin_read_ICPLB_DATA1()              bfin_read32(ICPLB_DATA1)
+#define bfin_write_ICPLB_DATA1(val)          bfin_write32(ICPLB_DATA1,val)
+#define bfin_read_ICPLB_DATA2()              bfin_read32(ICPLB_DATA2)
+#define bfin_write_ICPLB_DATA2(val)          bfin_write32(ICPLB_DATA2,val)
+#define bfin_read_ICPLB_DATA3()              bfin_read32(ICPLB_DATA3)
+#define bfin_write_ICPLB_DATA3(val)          bfin_write32(ICPLB_DATA3,val)
+#define bfin_read_ICPLB_DATA4()              bfin_read32(ICPLB_DATA4)
+#define bfin_write_ICPLB_DATA4(val)          bfin_write32(ICPLB_DATA4,val)
+#define bfin_read_ICPLB_DATA5()              bfin_read32(ICPLB_DATA5)
+#define bfin_write_ICPLB_DATA5(val)          bfin_write32(ICPLB_DATA5,val)
+#define bfin_read_ICPLB_DATA6()              bfin_read32(ICPLB_DATA6)
+#define bfin_write_ICPLB_DATA6(val)          bfin_write32(ICPLB_DATA6,val)
+#define bfin_read_ICPLB_DATA7()              bfin_read32(ICPLB_DATA7)
+#define bfin_write_ICPLB_DATA7(val)          bfin_write32(ICPLB_DATA7,val)
+#define bfin_read_ICPLB_DATA8()              bfin_read32(ICPLB_DATA8)
+#define bfin_write_ICPLB_DATA8(val)          bfin_write32(ICPLB_DATA8,val)
+#define bfin_read_ICPLB_DATA9()              bfin_read32(ICPLB_DATA9)
+#define bfin_write_ICPLB_DATA9(val)          bfin_write32(ICPLB_DATA9,val)
+#define bfin_read_ICPLB_DATA10()             bfin_read32(ICPLB_DATA10)
+#define bfin_write_ICPLB_DATA10(val)         bfin_write32(ICPLB_DATA10,val)
+#define bfin_read_ICPLB_DATA11()             bfin_read32(ICPLB_DATA11)
+#define bfin_write_ICPLB_DATA11(val)         bfin_write32(ICPLB_DATA11,val)
+#define bfin_read_ICPLB_DATA12()             bfin_read32(ICPLB_DATA12)
+#define bfin_write_ICPLB_DATA12(val)         bfin_write32(ICPLB_DATA12,val)
+#define bfin_read_ICPLB_DATA13()             bfin_read32(ICPLB_DATA13)
+#define bfin_write_ICPLB_DATA13(val)         bfin_write32(ICPLB_DATA13,val)
+#define bfin_read_ICPLB_DATA14()             bfin_read32(ICPLB_DATA14)
+#define bfin_write_ICPLB_DATA14(val)         bfin_write32(ICPLB_DATA14,val)
+#define bfin_read_ICPLB_DATA15()             bfin_read32(ICPLB_DATA15)
+#define bfin_write_ICPLB_DATA15(val)         bfin_write32(ICPLB_DATA15,val)
+#define bfin_read_ITEST_COMMAND()            bfin_read32(ITEST_COMMAND)
+#define bfin_write_ITEST_COMMAND(val)        bfin_write32(ITEST_COMMAND,val)
+#if 0
+#define ITEST_INDEX            0xFFE01304   /* Instruction Test Index Register */
+#endif
+#define bfin_read_ITEST_DATA0()              bfin_read32(ITEST_DATA0)
+#define bfin_write_ITEST_DATA0(val)          bfin_write32(ITEST_DATA0,val)
+#define bfin_read_ITEST_DATA1()              bfin_read32(ITEST_DATA1)
+#define bfin_write_ITEST_DATA1(val)          bfin_write32(ITEST_DATA1,val)
+
+/* Event/Interrupt Registers*/
+
+#define bfin_read_EVT0()                     bfin_read32(EVT0)
+#define bfin_write_EVT0(val)                 bfin_write32(EVT0,val)
+#define bfin_read_EVT1()                     bfin_read32(EVT1)
+#define bfin_write_EVT1(val)                 bfin_write32(EVT1,val)
+#define bfin_read_EVT2()                     bfin_read32(EVT2)
+#define bfin_write_EVT2(val)                 bfin_write32(EVT2,val)
+#define bfin_read_EVT3()                     bfin_read32(EVT3)
+#define bfin_write_EVT3(val)                 bfin_write32(EVT3,val)
+#define bfin_read_EVT4()                     bfin_read32(EVT4)
+#define bfin_write_EVT4(val)                 bfin_write32(EVT4,val)
+#define bfin_read_EVT5()                     bfin_read32(EVT5)
+#define bfin_write_EVT5(val)                 bfin_write32(EVT5,val)
+#define bfin_read_EVT6()                     bfin_read32(EVT6)
+#define bfin_write_EVT6(val)                 bfin_write32(EVT6,val)
+#define bfin_read_EVT7()                     bfin_read32(EVT7)
+#define bfin_write_EVT7(val)                 bfin_write32(EVT7,val)
+#define bfin_read_EVT8()                     bfin_read32(EVT8)
+#define bfin_write_EVT8(val)                 bfin_write32(EVT8,val)
+#define bfin_read_EVT9()                     bfin_read32(EVT9)
+#define bfin_write_EVT9(val)                 bfin_write32(EVT9,val)
+#define bfin_read_EVT10()                    bfin_read32(EVT10)
+#define bfin_write_EVT10(val)                bfin_write32(EVT10,val)
+#define bfin_read_EVT11()                    bfin_read32(EVT11)
+#define bfin_write_EVT11(val)                bfin_write32(EVT11,val)
+#define bfin_read_EVT12()                    bfin_read32(EVT12)
+#define bfin_write_EVT12(val)                bfin_write32(EVT12,val)
+#define bfin_read_EVT13()                    bfin_read32(EVT13)
+#define bfin_write_EVT13(val)                bfin_write32(EVT13,val)
+#define bfin_read_EVT14()                    bfin_read32(EVT14)
+#define bfin_write_EVT14(val)                bfin_write32(EVT14,val)
+#define bfin_read_EVT15()                    bfin_read32(EVT15)
+#define bfin_write_EVT15(val)                bfin_write32(EVT15,val)
+#define bfin_read_IMASK()                    bfin_read32(IMASK)
+#define bfin_write_IMASK(val)                bfin_write32(IMASK,val)
+#define bfin_read_IPEND()                    bfin_read32(IPEND)
+#define bfin_write_IPEND(val)                bfin_write32(IPEND,val)
+#define bfin_read_ILAT()                     bfin_read32(ILAT)
+#define bfin_write_ILAT(val)                 bfin_write32(ILAT,val)
+
+/*Core Timer Registers*/
+#define bfin_read_TCNTL()                    bfin_read32(TCNTL)
+#define bfin_write_TCNTL(val)                bfin_write32(TCNTL,val)
+#define bfin_read_TPERIOD()                  bfin_read32(TPERIOD)
+#define bfin_write_TPERIOD(val)              bfin_write32(TPERIOD,val)
+#define bfin_read_TSCALE()                   bfin_read32(TSCALE)
+#define bfin_write_TSCALE(val)               bfin_write32(TSCALE,val)
+#define bfin_read_TCOUNT()                   bfin_read32(TCOUNT)
+#define bfin_write_TCOUNT(val)               bfin_write32(TCOUNT,val)
+
+/*Debug/MP/Emulation Registers*/
+#define bfin_read_DSPID()                    bfin_read32(DSPID)
+#define bfin_write_DSPID(val)                bfin_write32(DSPID,val)
+#define bfin_read_DBGCTL()                   bfin_read32(DBGCTL)
+#define bfin_write_DBGCTL(val)               bfin_write32(DBGCTL,val)
+#define bfin_read_DBGSTAT()                  bfin_read32(DBGSTAT)
+#define bfin_write_DBGSTAT(val)              bfin_write32(DBGSTAT,val)
+#define bfin_read_EMUDAT()                   bfin_read32(EMUDAT)
+#define bfin_write_EMUDAT(val)               bfin_write32(EMUDAT,val)
+
+/*Trace Buffer Registers*/
+#define bfin_read_TBUFCTL()                  bfin_read32(TBUFCTL)
+#define bfin_write_TBUFCTL(val)              bfin_write32(TBUFCTL,val)
+#define bfin_read_TBUFSTAT()                 bfin_read32(TBUFSTAT)
+#define bfin_write_TBUFSTAT(val)             bfin_write32(TBUFSTAT,val)
+#define bfin_read_TBUF()                     bfin_read32(TBUF)
+#define bfin_write_TBUF(val)                 bfin_write32(TBUF,val)
+
+/*Watch Point Control Registers*/
+#define bfin_read_WPIACTL()                  bfin_read32(WPIACTL)
+#define bfin_write_WPIACTL(val)              bfin_write32(WPIACTL,val)
+#define bfin_read_WPIA0()                    bfin_read32(WPIA0)
+#define bfin_write_WPIA0(val)                bfin_write32(WPIA0,val)
+#define bfin_read_WPIA1()                    bfin_read32(WPIA1)
+#define bfin_write_WPIA1(val)                bfin_write32(WPIA1,val)
+#define bfin_read_WPIA2()                    bfin_read32(WPIA2)
+#define bfin_write_WPIA2(val)                bfin_write32(WPIA2,val)
+#define bfin_read_WPIA3()                    bfin_read32(WPIA3)
+#define bfin_write_WPIA3(val)                bfin_write32(WPIA3,val)
+#define bfin_read_WPIA4()                    bfin_read32(WPIA4)
+#define bfin_write_WPIA4(val)                bfin_write32(WPIA4,val)
+#define bfin_read_WPIA5()                    bfin_read32(WPIA5)
+#define bfin_write_WPIA5(val)                bfin_write32(WPIA5,val)
+#define bfin_read_WPIACNT0()                 bfin_read32(WPIACNT0)
+#define bfin_write_WPIACNT0(val)             bfin_write32(WPIACNT0,val)
+#define bfin_read_WPIACNT1()                 bfin_read32(WPIACNT1)
+#define bfin_write_WPIACNT1(val)             bfin_write32(WPIACNT1,val)
+#define bfin_read_WPIACNT2()                 bfin_read32(WPIACNT2)
+#define bfin_write_WPIACNT2(val)             bfin_write32(WPIACNT2,val)
+#define bfin_read_WPIACNT3()                 bfin_read32(WPIACNT3)
+#define bfin_write_WPIACNT3(val)             bfin_write32(WPIACNT3,val)
+#define bfin_read_WPIACNT4()                 bfin_read32(WPIACNT4)
+#define bfin_write_WPIACNT4(val)             bfin_write32(WPIACNT4,val)
+#define bfin_read_WPIACNT5()                 bfin_read32(WPIACNT5)
+#define bfin_write_WPIACNT5(val)             bfin_write32(WPIACNT5,val)
+#define bfin_read_WPDACTL()                  bfin_read32(WPDACTL)
+#define bfin_write_WPDACTL(val)              bfin_write32(WPDACTL,val)
+#define bfin_read_WPDA0()                    bfin_read32(WPDA0)
+#define bfin_write_WPDA0(val)                bfin_write32(WPDA0,val)
+#define bfin_read_WPDA1()                    bfin_read32(WPDA1)
+#define bfin_write_WPDA1(val)                bfin_write32(WPDA1,val)
+#define bfin_read_WPDACNT0()                 bfin_read32(WPDACNT0)
+#define bfin_write_WPDACNT0(val)             bfin_write32(WPDACNT0,val)
+#define bfin_read_WPDACNT1()                 bfin_read32(WPDACNT1)
+#define bfin_write_WPDACNT1(val)             bfin_write32(WPDACNT1,val)
+#define bfin_read_WPSTAT()                   bfin_read32(WPSTAT)
+#define bfin_write_WPSTAT(val)               bfin_write32(WPSTAT,val)
+
+/*Performance Monitor Registers*/
+#define bfin_read_PFCTL()                    bfin_read32(PFCTL)
+#define bfin_write_PFCTL(val)                bfin_write32(PFCTL,val)
+#define bfin_read_PFCNTR0()                  bfin_read32(PFCNTR0)
+#define bfin_write_PFCNTR0(val)              bfin_write32(PFCNTR0,val)
+#define bfin_read_PFCNTR1()                  bfin_read32(PFCNTR1)
+#define bfin_write_PFCNTR1(val)              bfin_write32(PFCNTR1,val)
+
+/*
+#define IPRIO                  0xFFE02110
+*/
+
+#endif				/* _CDEF_LPBLACKFIN_H */
diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h
new file mode 100644
index 00000000000..6f6af2b8e9e
--- /dev/null
+++ b/arch/blackfin/include/asm/checksum.h
@@ -0,0 +1,100 @@
+#ifndef _BFIN_CHECKSUM_H
+#define _BFIN_CHECKSUM_H
+
+/*
+ * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com
+ *
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy(const void *src, void *dst,
+			       int len, __wsum sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					  int len, __wsum sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy((src), (dst), (len), (sum))
+
+__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl);
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	while (sum >> 16)
+		sum = (sum & 0xffff) + (sum >> 16);
+	return ((~(sum << 16)) >> 16);
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		   unsigned short proto, __wsum sum)
+{
+
+	__asm__ ("%0 = %0 + %1;\n\t"
+		 "CC = AC0;\n\t"
+		 "if !CC jump 4;\n\t"
+		 "%0 = %0 + %4;\n\t"
+		 "%0 = %0 + %2;\n\t"
+		 "CC = AC0;\n\t"
+                 "if !CC jump 4;\n\t"
+                 "%0 = %0 + %4;\n\t"
+ 		 "%0 = %0 + %3;\n\t"
+		 "CC = AC0;\n\t"
+                 "if !CC jump 4;\n\t"
+                 "%0 = %0 + %4;\n\t"
+                 "NOP;\n\t"
+ 		 : "=d" (sum)
+		 : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum));
+
+	return (sum);
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#endif				/* _BFIN_CHECKSUM_H */
diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h
new file mode 100644
index 00000000000..033bba92d61
--- /dev/null
+++ b/arch/blackfin/include/asm/clocks.h
@@ -0,0 +1,70 @@
+/*
+ * File:         include/asm-blackfin/mach-common/clocks.h
+ * Based on:     include/asm-blackfin/mach-bf537/bf537.h
+ * Author:	 Robin Getz <rgetz@blackfin.uclinux.org>
+ *
+ * Created:      25Jul07
+ * Description:  Common Clock definitions for various kernel files
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _BFIN_CLOCKS_H
+#define _BFIN_CLOCKS_H
+
+#ifdef CONFIG_CCLK_DIV_1
+# define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
+# define CONFIG_CCLK_DIV 1
+#endif
+
+#ifdef CONFIG_CCLK_DIV_2
+# define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
+# define CONFIG_CCLK_DIV 2
+#endif
+
+#ifdef CONFIG_CCLK_DIV_4
+# define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
+# define CONFIG_CCLK_DIV 4
+#endif
+
+#ifdef CONFIG_CCLK_DIV_8
+# define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
+# define CONFIG_CCLK_DIV 8
+#endif
+
+#ifndef CONFIG_PLL_BYPASS
+# ifndef CONFIG_CLKIN_HALF
+#  define CONFIG_VCO_HZ   (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
+# else
+#  define CONFIG_VCO_HZ   ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
+# endif
+
+# define CONFIG_CCLK_HZ  (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
+# define CONFIG_SCLK_HZ  (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
+
+#else
+# define CONFIG_VCO_HZ   (CONFIG_CLKIN_HZ)
+# define CONFIG_CCLK_HZ  (CONFIG_CLKIN_HZ)
+# define CONFIG_SCLK_HZ  (CONFIG_CLKIN_HZ)
+# define CONFIG_VCO_MULT 0
+#endif
+
+#endif
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
new file mode 100644
index 00000000000..c0e630edfb9
--- /dev/null
+++ b/arch/blackfin/include/asm/context.S
@@ -0,0 +1,355 @@
+/*
+ * File:         arch/blackfin/kernel/context.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+/*
+ * NOTE!  The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
+/*
+ * Code to save processor context.
+ *  We even save the register which are preserved by a function call
+ *	 - r4, r5, r6, r7, p3, p4, p5
+ */
+.macro save_context_with_interrupts
+	[--sp] = SYSCFG;
+
+	[--sp] = P0;	/*orig_p0*/
+	[--sp] = R0;	/*orig_r0*/
+
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+
+	[--sp] = r0;	/* Skip reserved */
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+	[--sp] = r0;	/* Skip IPEND as well. */
+	/* Switch to other method of keeping interrupts disabled.  */
+#ifdef CONFIG_DEBUG_HWERR
+	r0 = 0x3f;
+	sti r0;
+#else
+	cli r0;
+#endif
+	[--sp] = RETI;  /*orig_pc*/
+	/* Clear all L registers.  */
+	r0 = 0 (x);
+	l0 = r0;
+	l1 = r0;
+	l2 = r0;
+	l3 = r0;
+.endm
+
+.macro save_context_syscall
+	[--sp] = SYSCFG;
+
+	[--sp] = P0;	/*orig_p0*/
+	[--sp] = R0;	/*orig_r0*/
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+
+	[--sp] = r0;	/* Skip reserved */
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+	[--sp] = r0;	/* Skip IPEND as well. */
+	[--sp] = RETI;  /*orig_pc*/
+	/* Clear all L registers.  */
+	r0 = 0 (x);
+	l0 = r0;
+	l1 = r0;
+	l2 = r0;
+	l3 = r0;
+.endm
+
+.macro save_context_no_interrupts
+	[--sp] = SYSCFG;
+	[--sp] = P0;	/* orig_p0 */
+	[--sp] = R0;	/* orig_r0 */
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+
+#ifdef CONFIG_KGDB
+	fp     = 0(Z);
+	r1     = sp;
+	r1    += 60;
+	r1    += 60;
+	r1    += 60;
+	[--sp] = r1;
+#else
+	[--sp] = r0;	/* Skip reserved */
+#endif
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+#ifdef CONFIG_KGDB
+	r1.l = lo(IPEND);
+	r1.h = hi(IPEND);
+	[--sp] = r1;
+#else
+	[--sp] = r0;	/* Skip IPEND as well. */
+#endif
+	[--sp] = r0;  /*orig_pc*/
+	/* Clear all L registers.  */
+	r0 = 0 (x);
+	l0 = r0;
+	l1 = r0;
+	l2 = r0;
+	l3 = r0;
+.endm
+
+.macro restore_context_no_interrupts
+	sp += 4;	/* Skip orig_pc */
+	sp += 4;	/* Skip IPEND */
+	SEQSTAT = [sp++];
+	RETE = [sp++];
+	RETN = [sp++];
+	RETX = [sp++];
+	r0 = [sp++];
+	RETI = r0;	/* Restore RETI indirectly when in exception */
+	RETS = [sp++];
+
+	sp += 4;	/* Skip Reserved */
+
+	ASTAT = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	sp += 4;
+	fp = [sp++];
+
+	( R7 : 0, P5 : 0) = [ SP ++ ];
+	sp += 8;	/* Skip orig_r0/orig_p0 */
+	SYSCFG = [sp++];
+.endm
+
+.macro restore_context_with_interrupts
+	sp += 4;	/* Skip orig_pc */
+	sp += 4;	/* Skip IPEND */
+	SEQSTAT = [sp++];
+	RETE = [sp++];
+	RETN = [sp++];
+	RETX = [sp++];
+	RETI = [sp++];
+	RETS = [sp++];
+
+	p0.h = _irq_flags;
+	p0.l = _irq_flags;
+	r0 = [p0];
+	sti r0;
+
+	sp += 4;	/* Skip Reserved */
+
+	ASTAT = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	sp += 4;
+	fp = [sp++];
+
+	( R7 : 0, P5 : 0) = [ SP ++ ];
+	sp += 8;	/* Skip orig_r0/orig_p0 */
+	csync;
+	SYSCFG = [sp++];
+	csync;
+.endm
+
diff --git a/arch/blackfin/include/asm/cplb-mpu.h b/arch/blackfin/include/asm/cplb-mpu.h
new file mode 100644
index 00000000000..75c67b99d60
--- /dev/null
+++ b/arch/blackfin/include/asm/cplb-mpu.h
@@ -0,0 +1,61 @@
+/*
+ * File:         include/asm-blackfin/cplbinit.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef __ASM_BFIN_CPLB_MPU_H
+#define __ASM_BFIN_CPLB_MPU_H
+
+struct cplb_entry {
+	unsigned long data, addr;
+};
+
+struct mem_region {
+	unsigned long start, end;
+	unsigned long dcplb_data;
+	unsigned long icplb_data;
+};
+
+extern struct cplb_entry dcplb_tbl[MAX_CPLBS];
+extern struct cplb_entry icplb_tbl[MAX_CPLBS];
+extern int first_switched_icplb;
+extern int first_mask_dcplb;
+extern int first_switched_dcplb;
+
+extern int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot;
+extern int nr_cplb_flush;
+
+extern int page_mask_order;
+extern int page_mask_nelts;
+
+extern unsigned long *current_rwx_mask;
+
+extern void flush_switched_cplbs(void);
+extern void set_mask_dcplbs(unsigned long *);
+
+extern void __noreturn panic_cplb_error(int seqstat, struct pt_regs *);
+
+#endif /* __ASM_BFIN_CPLB_MPU_H */
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
new file mode 100644
index 00000000000..05d6f05fb74
--- /dev/null
+++ b/arch/blackfin/include/asm/cplb.h
@@ -0,0 +1,110 @@
+/*
+ * File:         include/asm-blackfin/cplb.h
+ * Based on:     include/asm-blackfin/mach-bf537/bf537.h
+ * Author:       Robin Getz <rgetz@blackfin.uclinux.org>
+ *
+ * Created:      2000
+ * Description:  Common CPLB definitions for CPLB init
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _CPLB_H
+#define _CPLB_H
+
+#include <asm/blackfin.h>
+#include <mach/anomaly.h>
+
+#define SDRAM_IGENERIC    (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
+#define SDRAM_IKERNEL     (SDRAM_IGENERIC | CPLB_LOCK)
+#define L1_IMEMORY        (               CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define SDRAM_INON_CHBL   (               CPLB_USER_RD | CPLB_VALID)
+
+/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/
+
+#if ANOMALY_05000158
+#define ANOMALY_05000158_WORKAROUND             0x200
+#else
+#define ANOMALY_05000158_WORKAROUND             0x0
+#endif
+
+#define CPLB_COMMON	(CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+
+#ifdef CONFIG_BFIN_WB         /*Write Back Policy */
+#define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_COMMON)
+#else                           /*Write Through */
+#define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW  | CPLB_COMMON)
+#endif
+
+#define L1_DMEMORY       (CPLB_LOCK | CPLB_COMMON)
+#define L2_MEMORY        (CPLB_COMMON)
+#define SDRAM_DNON_CHBL  (CPLB_COMMON)
+#define SDRAM_EBIU       (CPLB_COMMON)
+#define SDRAM_OOPS       (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
+
+#define SIZE_1K 0x00000400      /* 1K */
+#define SIZE_4K 0x00001000      /* 4K */
+#define SIZE_1M 0x00100000      /* 1M */
+#define SIZE_4M 0x00400000      /* 4M */
+
+#ifdef CONFIG_MPU
+#define MAX_CPLBS 16
+#else
+#define MAX_CPLBS (16 * 2)
+#endif
+
+#define ASYNC_MEMORY_CPLB_COVERAGE	((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
+				 ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M)
+
+#define CPLB_ENABLE_ICACHE_P	0
+#define CPLB_ENABLE_DCACHE_P	1
+#define CPLB_ENABLE_DCACHE2_P	2
+#define CPLB_ENABLE_CPLBS_P	3	/* Deprecated! */
+#define CPLB_ENABLE_ICPLBS_P	4
+#define CPLB_ENABLE_DCPLBS_P	5
+
+#define CPLB_ENABLE_ICACHE	(1<<CPLB_ENABLE_ICACHE_P)
+#define CPLB_ENABLE_DCACHE	(1<<CPLB_ENABLE_DCACHE_P)
+#define CPLB_ENABLE_DCACHE2	(1<<CPLB_ENABLE_DCACHE2_P)
+#define CPLB_ENABLE_CPLBS	(1<<CPLB_ENABLE_CPLBS_P)
+#define CPLB_ENABLE_ICPLBS	(1<<CPLB_ENABLE_ICPLBS_P)
+#define CPLB_ENABLE_DCPLBS	(1<<CPLB_ENABLE_DCPLBS_P)
+#define CPLB_ENABLE_ANY_CPLBS	CPLB_ENABLE_CPLBS | \
+				CPLB_ENABLE_ICPLBS | \
+				CPLB_ENABLE_DCPLBS
+
+#define CPLB_RELOADED		0x0000
+#define CPLB_NO_UNLOCKED	0x0001
+#define CPLB_NO_ADDR_MATCH	0x0002
+#define CPLB_PROT_VIOL		0x0003
+#define CPLB_UNKNOWN_ERR	0x0004
+
+#define CPLB_DEF_CACHE		CPLB_L1_CHBL | CPLB_WT
+#define CPLB_CACHE_ENABLED	CPLB_L1_CHBL | CPLB_DIRTY
+
+#define CPLB_I_PAGE_MGMT	CPLB_LOCK | CPLB_VALID
+#define CPLB_D_PAGE_MGMT	CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID
+#define CPLB_DNOCACHE		CPLB_ALL_ACCESS | CPLB_VALID
+#define CPLB_DDOCACHE		CPLB_DNOCACHE | CPLB_DEF_CACHE
+#define CPLB_INOCACHE   	CPLB_USER_RD | CPLB_VALID
+#define CPLB_IDOCACHE   	CPLB_INOCACHE | CPLB_L1_CHBL
+
+#endif				/* _CPLB_H */
diff --git a/arch/blackfin/include/asm/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h
new file mode 100644
index 00000000000..0eb1c1b685a
--- /dev/null
+++ b/arch/blackfin/include/asm/cplbinit.h
@@ -0,0 +1,95 @@
+/*
+ * File:         include/asm-blackfin/cplbinit.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __ASM_CPLBINIT_H__
+#define __ASM_CPLBINIT_H__
+
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+
+#ifdef CONFIG_MPU
+
+#include <asm/cplb-mpu.h>
+
+#else
+
+#define INITIAL_T 0x1
+#define SWITCH_T  0x2
+#define I_CPLB    0x4
+#define D_CPLB    0x8
+
+#define IN_KERNEL 1
+
+enum
+{ZERO_P, L1I_MEM, L1D_MEM, SDRAM_KERN , SDRAM_RAM_MTD, SDRAM_DMAZ, RES_MEM, ASYNC_MEM, L2_MEM};
+
+struct cplb_desc {
+	u32 start; /* start address */
+	u32 end; /* end address */
+	u32 psize; /* prefered size if any otherwise 1MB or 4MB*/
+	u16 attr;/* attributes */
+	u16 i_conf;/* I-CPLB DATA */
+	u16 d_conf;/* D-CPLB DATA */
+	u16 valid;/* valid */
+	const s8 name[30];/* name */
+};
+
+struct cplb_tab {
+  u_long *tab;
+	u16 pos;
+	u16 size;
+};
+
+extern u_long icplb_table[];
+extern u_long dcplb_table[];
+
+/* Till here we are discussing about the static memory management model.
+ * However, the operating envoronments commonly define more CPLB
+ * descriptors to cover the entire addressable memory than will fit into
+ * the available on-chip 16 CPLB MMRs. When this happens, the below table
+ * will be used which will hold all the potentially required CPLB descriptors
+ *
+ * This is how Page descriptor Table is implemented in uClinux/Blackfin.
+ */
+
+extern u_long ipdt_table[];
+extern u_long dpdt_table[];
+#ifdef CONFIG_CPLB_INFO
+extern u_long ipdt_swapcount_table[];
+extern u_long dpdt_swapcount_table[];
+#endif
+
+#endif /* CONFIG_MPU */
+
+extern unsigned long reserved_mem_dcache_on;
+extern unsigned long reserved_mem_icache_on;
+
+extern void generate_cpl_tables(void);
+
+#endif
diff --git a/arch/blackfin/include/asm/cpumask.h b/arch/blackfin/include/asm/cpumask.h
new file mode 100644
index 00000000000..b20a8e9012c
--- /dev/null
+++ b/arch/blackfin/include/asm/cpumask.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BLACKFIN_CPUMASK_H
+#define _ASM_BLACKFIN_CPUMASK_H
+
+#include <asm-generic/cpumask.h>
+
+#endif				/* _ASM_BLACKFIN_CPUMASK_H */
diff --git a/arch/blackfin/include/asm/cputime.h b/arch/blackfin/include/asm/cputime.h
new file mode 100644
index 00000000000..2b19705f988
--- /dev/null
+++ b/arch/blackfin/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __BLACKFIN_CPUTIME_H
+#define __BLACKFIN_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif				/* __BLACKFIN_CPUTIME_H */
diff --git a/arch/blackfin/include/asm/current.h b/arch/blackfin/include/asm/current.h
new file mode 100644
index 00000000000..31918d29122
--- /dev/null
+++ b/arch/blackfin/include/asm/current.h
@@ -0,0 +1,23 @@
+#ifndef _BLACKFIN_CURRENT_H
+#define _BLACKFIN_CURRENT_H
+/*
+ *	current.h
+ *	(C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
+ *
+ *	rather than dedicate a register (as the m68k source does), we
+ *	just keep a global,  we should probably just change it all to be
+ *	current and lose _current_task.
+ */
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void) __attribute__ ((__const__));
+static inline struct task_struct *get_current(void)
+{
+	return (current_thread_info()->task);
+}
+
+#define	current	(get_current())
+
+#endif				/* _BLACKFIN_CURRENT_H */
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
new file mode 100644
index 00000000000..6341eebff3d
--- /dev/null
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -0,0 +1,712 @@
+ /*
+  * File:        include/asm-blackfin/mach-common/def_LPBlackfin.h
+  * Based on:
+  * Author:      unknown
+  *              COPYRIGHT 2005 Analog Devices
+  * Created:     ?
+  * Description:
+  *
+  * Modified:
+  *
+  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2, or (at your option)
+  * any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program; see the file COPYING.
+  * If not, write to the Free Software Foundation,
+  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+  */
+
+/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */
+
+#ifndef _DEF_LPBLACKFIN_H
+#define _DEF_LPBLACKFIN_H
+
+#include <mach/anomaly.h>
+
+#define MK_BMSK_(x) (1<<x)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+#if ANOMALY_05000198
+# define NOP_PAD_ANOMALY_05000198 "nop;"
+#else
+# define NOP_PAD_ANOMALY_05000198
+#endif
+
+#define bfin_read8(addr) ({ \
+	uint32_t __v; \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"%0 = b[%1] (z);" \
+		: "=d" (__v) \
+		: "a" (addr) \
+	); \
+	__v; })
+
+#define bfin_read16(addr) ({ \
+	uint32_t __v; \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"%0 = w[%1] (z);" \
+		: "=d" (__v) \
+		: "a" (addr) \
+	); \
+	__v; })
+
+#define bfin_read32(addr) ({ \
+	uint32_t __v; \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"%0 = [%1];" \
+		: "=d" (__v) \
+		: "a" (addr) \
+	); \
+	__v; })
+
+#define bfin_write8(addr, val) \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"b[%0] = %1;" \
+		: \
+		: "a" (addr), "d" ((uint8_t)(val)) \
+		: "memory" \
+	)
+
+#define bfin_write16(addr, val) \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"w[%0] = %1;" \
+		: \
+		: "a" (addr), "d" ((uint16_t)(val)) \
+		: "memory" \
+	)
+
+#define bfin_write32(addr, val) \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000198 \
+		"[%0] = %1;" \
+		: \
+		: "a" (addr), "d" (val) \
+		: "memory" \
+	)
+
+#endif /* __ASSEMBLY__ */
+
+/**************************************************
+ * System Register Bits
+ **************************************************/
+
+/**************************************************
+ * ASTAT register
+ **************************************************/
+
+/* definitions of ASTAT bit positions*/
+
+/*Result of last ALU0 or shifter operation is zero*/
+#define ASTAT_AZ_P         0x00000000
+/*Result of last ALU0 or shifter operation is negative*/
+#define ASTAT_AN_P         0x00000001
+/*Condition Code, used for holding comparison results*/
+#define ASTAT_CC_P         0x00000005
+/*Quotient Bit*/
+#define ASTAT_AQ_P         0x00000006
+/*Rounding mode, set for biased, clear for unbiased*/
+#define ASTAT_RND_MOD_P    0x00000008
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_P        0x0000000C
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_COPY_P   0x00000002
+/*Result of last ALU1 operation generated a carry*/
+#define ASTAT_AC1_P        0x0000000D
+/*Result of last ALU0 or MAC0 operation overflowed, sticky for MAC*/
+#define ASTAT_AV0_P        0x00000010
+/*Sticky version of ASTAT_AV0 */
+#define ASTAT_AV0S_P       0x00000011
+/*Result of last MAC1 operation overflowed, sticky for MAC*/
+#define ASTAT_AV1_P        0x00000012
+/*Sticky version of ASTAT_AV1 */
+#define ASTAT_AV1S_P       0x00000013
+/*Result of last ALU0 or MAC0 operation overflowed*/
+#define ASTAT_V_P          0x00000018
+/*Result of last ALU0 or MAC0 operation overflowed*/
+#define ASTAT_V_COPY_P     0x00000003
+/*Sticky version of ASTAT_V*/
+#define ASTAT_VS_P         0x00000019
+
+/* Masks */
+
+/*Result of last ALU0 or shifter operation is zero*/
+#define ASTAT_AZ           MK_BMSK_(ASTAT_AZ_P)
+/*Result of last ALU0 or shifter operation is negative*/
+#define ASTAT_AN           MK_BMSK_(ASTAT_AN_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0          MK_BMSK_(ASTAT_AC0_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC0_COPY     MK_BMSK_(ASTAT_AC0_COPY_P)
+/*Result of last ALU0 operation generated a carry*/
+#define ASTAT_AC1          MK_BMSK_(ASTAT_AC1_P)
+/*Result of last ALU0 or MAC0 operation overflowed, sticky for MAC*/
+#define ASTAT_AV0          MK_BMSK_(ASTAT_AV0_P)
+/*Result of last MAC1 operation overflowed, sticky for MAC*/
+#define ASTAT_AV1          MK_BMSK_(ASTAT_AV1_P)
+/*Condition Code, used for holding comparison results*/
+#define ASTAT_CC           MK_BMSK_(ASTAT_CC_P)
+/*Quotient Bit*/
+#define ASTAT_AQ           MK_BMSK_(ASTAT_AQ_P)
+/*Rounding mode, set for biased, clear for unbiased*/
+#define ASTAT_RND_MOD      MK_BMSK_(ASTAT_RND_MOD_P)
+/*Overflow Bit*/
+#define ASTAT_V            MK_BMSK_(ASTAT_V_P)
+/*Overflow Bit*/
+#define ASTAT_V_COPY       MK_BMSK_(ASTAT_V_COPY_P)
+
+/**************************************************
+ *   SEQSTAT register
+ **************************************************/
+
+/* Bit Positions  */
+#define SEQSTAT_EXCAUSE0_P      0x00000000	/* Last exception cause bit 0 */
+#define SEQSTAT_EXCAUSE1_P      0x00000001	/* Last exception cause bit 1 */
+#define SEQSTAT_EXCAUSE2_P      0x00000002	/* Last exception cause bit 2 */
+#define SEQSTAT_EXCAUSE3_P      0x00000003	/* Last exception cause bit 3 */
+#define SEQSTAT_EXCAUSE4_P      0x00000004	/* Last exception cause bit 4 */
+#define SEQSTAT_EXCAUSE5_P      0x00000005	/* Last exception cause bit 5 */
+#define SEQSTAT_IDLE_REQ_P      0x0000000C	/* Pending idle mode request,
+						 * set by IDLE instruction.
+						 */
+#define SEQSTAT_SFTRESET_P      0x0000000D	/* Indicates whether the last
+						 * reset was a software reset
+						 * (=1)
+						 */
+#define SEQSTAT_HWERRCAUSE0_P   0x0000000E	/* Last hw error cause bit 0 */
+#define SEQSTAT_HWERRCAUSE1_P   0x0000000F	/* Last hw error cause bit 1 */
+#define SEQSTAT_HWERRCAUSE2_P   0x00000010	/* Last hw error cause bit 2 */
+#define SEQSTAT_HWERRCAUSE3_P   0x00000011	/* Last hw error cause bit 3 */
+#define SEQSTAT_HWERRCAUSE4_P   0x00000012	/* Last hw error cause bit 4 */
+/* Masks */
+/* Exception cause */
+#define SEQSTAT_EXCAUSE        (MK_BMSK_(SEQSTAT_EXCAUSE0_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE1_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE2_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE3_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE4_P) | \
+                                MK_BMSK_(SEQSTAT_EXCAUSE5_P) | \
+                                0)
+
+/* Indicates whether the last reset was a software reset (=1) */
+#define SEQSTAT_SFTRESET       (MK_BMSK_(SEQSTAT_SFTRESET_P))
+
+/* Last hw error cause */
+#define SEQSTAT_HWERRCAUSE     (MK_BMSK_(SEQSTAT_HWERRCAUSE0_P) | \
+                                MK_BMSK_(SEQSTAT_HWERRCAUSE1_P) | \
+                                MK_BMSK_(SEQSTAT_HWERRCAUSE2_P) | \
+                                MK_BMSK_(SEQSTAT_HWERRCAUSE3_P) | \
+                                MK_BMSK_(SEQSTAT_HWERRCAUSE4_P) | \
+                                0)
+
+/* Translate bits to something useful */
+
+/* Last hw error cause */
+#define SEQSTAT_HWERRCAUSE_SHIFT         (14)
+#define SEQSTAT_HWERRCAUSE_SYSTEM_MMR    (0x02 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_EXTERN_ADDR   (0x03 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_PERF_FLOW     (0x12 << SEQSTAT_HWERRCAUSE_SHIFT)
+#define SEQSTAT_HWERRCAUSE_RAISE_5       (0x18 << SEQSTAT_HWERRCAUSE_SHIFT)
+
+/**************************************************
+ *   SYSCFG register
+ **************************************************/
+
+/* Bit Positions */
+#define SYSCFG_SSSTEP_P     0x00000000	/* Supervisor single step, when
+					 * set it forces an exception
+					 * for each instruction executed
+					 */
+#define SYSCFG_CCEN_P       0x00000001	/* Enable cycle counter (=1) */
+#define SYSCFG_SNEN_P       0x00000002	/* Self nesting Interrupt Enable */
+
+/* Masks */
+
+/* Supervisor single step, when set it forces an exception for each
+ *instruction executed
+ */
+#define SYSCFG_SSSTEP         MK_BMSK_(SYSCFG_SSSTEP_P )
+/* Enable cycle counter (=1) */
+#define SYSCFG_CCEN           MK_BMSK_(SYSCFG_CCEN_P )
+/* Self Nesting Interrupt Enable */
+#define SYSCFG_SNEN	       MK_BMSK_(SYSCFG_SNEN_P)
+/* Backward-compatibility for typos in prior releases */
+#define SYSCFG_SSSSTEP         SYSCFG_SSSTEP
+#define SYSCFG_CCCEN           SYSCFG_CCEN
+
+/****************************************************
+ * Core MMR Register Map
+ ****************************************************/
+
+/* Data Cache & SRAM Memory  (0xFFE00000 - 0xFFE00404) */
+
+#define SRAM_BASE_ADDRESS  0xFFE00000	/* SRAM Base Address Register */
+#define DMEM_CONTROL       0xFFE00004	/* Data memory control */
+#define DCPLB_STATUS       0xFFE00008	/* Data Cache Programmable Look-Aside
+					 * Buffer Status
+					 */
+#define DCPLB_FAULT_STATUS 0xFFE00008	/* "" (older define) */
+#define DCPLB_FAULT_ADDR   0xFFE0000C	/* Data Cache Programmable Look-Aside
+					 * Buffer Fault Address
+					 */
+#define DCPLB_ADDR0        0xFFE00100	/* Data Cache Protection Lookaside
+					 * Buffer 0
+					 */
+#define DCPLB_ADDR1        0xFFE00104	/* Data Cache Protection Lookaside
+					 * Buffer 1
+					 */
+#define DCPLB_ADDR2        0xFFE00108	/* Data Cache Protection Lookaside
+					 * Buffer 2
+					 */
+#define DCPLB_ADDR3        0xFFE0010C	/* Data Cacheability Protection
+					 * Lookaside Buffer 3
+					 */
+#define DCPLB_ADDR4        0xFFE00110	/* Data Cacheability Protection
+					 * Lookaside Buffer 4
+					 */
+#define DCPLB_ADDR5        0xFFE00114	/* Data Cacheability Protection
+					 * Lookaside Buffer 5
+					 */
+#define DCPLB_ADDR6        0xFFE00118	/* Data Cacheability Protection
+					 * Lookaside Buffer 6
+					 */
+#define DCPLB_ADDR7        0xFFE0011C	/* Data Cacheability Protection
+					 * Lookaside Buffer 7
+					 */
+#define DCPLB_ADDR8        0xFFE00120	/* Data Cacheability Protection
+					 * Lookaside Buffer 8
+					 */
+#define DCPLB_ADDR9        0xFFE00124	/* Data Cacheability Protection
+					 * Lookaside Buffer 9
+					 */
+#define DCPLB_ADDR10       0xFFE00128	/* Data Cacheability Protection
+					 * Lookaside Buffer 10
+					 */
+#define DCPLB_ADDR11       0xFFE0012C	/* Data Cacheability Protection
+					 * Lookaside Buffer 11
+					 */
+#define DCPLB_ADDR12       0xFFE00130	/* Data Cacheability Protection
+					 * Lookaside Buffer 12
+					 */
+#define DCPLB_ADDR13       0xFFE00134	/* Data Cacheability Protection
+					 * Lookaside Buffer 13
+					 */
+#define DCPLB_ADDR14       0xFFE00138	/* Data Cacheability Protection
+					 * Lookaside Buffer 14
+					 */
+#define DCPLB_ADDR15       0xFFE0013C	/* Data Cacheability Protection
+					 * Lookaside Buffer 15
+					 */
+#define DCPLB_DATA0        0xFFE00200	/* Data Cache 0 Status */
+#define DCPLB_DATA1        0xFFE00204	/* Data Cache 1 Status */
+#define DCPLB_DATA2        0xFFE00208	/* Data Cache 2 Status */
+#define DCPLB_DATA3        0xFFE0020C	/* Data Cache 3 Status */
+#define DCPLB_DATA4        0xFFE00210	/* Data Cache 4 Status */
+#define DCPLB_DATA5        0xFFE00214	/* Data Cache 5 Status */
+#define DCPLB_DATA6        0xFFE00218	/* Data Cache 6 Status */
+#define DCPLB_DATA7        0xFFE0021C	/* Data Cache 7 Status */
+#define DCPLB_DATA8        0xFFE00220	/* Data Cache 8 Status */
+#define DCPLB_DATA9        0xFFE00224	/* Data Cache 9 Status */
+#define DCPLB_DATA10       0xFFE00228	/* Data Cache 10 Status */
+#define DCPLB_DATA11       0xFFE0022C	/* Data Cache 11 Status */
+#define DCPLB_DATA12       0xFFE00230	/* Data Cache 12 Status */
+#define DCPLB_DATA13       0xFFE00234	/* Data Cache 13 Status */
+#define DCPLB_DATA14       0xFFE00238	/* Data Cache 14 Status */
+#define DCPLB_DATA15       0xFFE0023C	/* Data Cache 15 Status */
+#define DCPLB_DATA16       0xFFE00240	/* Extra Dummy entry */
+
+#define DTEST_COMMAND      0xFFE00300	/* Data Test Command Register */
+#define DTEST_DATA0        0xFFE00400	/* Data Test Data Register */
+#define DTEST_DATA1        0xFFE00404	/* Data Test Data Register */
+
+/* Instruction Cache & SRAM Memory  (0xFFE01004 - 0xFFE01404) */
+
+#define IMEM_CONTROL       0xFFE01004	/* Instruction Memory Control */
+#define ICPLB_STATUS       0xFFE01008	/* Instruction Cache miss status */
+#define CODE_FAULT_STATUS  0xFFE01008	/* "" (older define) */
+#define ICPLB_FAULT_ADDR   0xFFE0100C	/* Instruction Cache miss address */
+#define CODE_FAULT_ADDR    0xFFE0100C	/* "" (older define) */
+#define ICPLB_ADDR0        0xFFE01100	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 0
+					 */
+#define ICPLB_ADDR1        0xFFE01104	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 1
+					 */
+#define ICPLB_ADDR2        0xFFE01108	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 2
+					 */
+#define ICPLB_ADDR3        0xFFE0110C	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 3
+					 */
+#define ICPLB_ADDR4        0xFFE01110	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 4
+					 */
+#define ICPLB_ADDR5        0xFFE01114	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 5
+					 */
+#define ICPLB_ADDR6        0xFFE01118	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 6
+					 */
+#define ICPLB_ADDR7        0xFFE0111C	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 7
+					 */
+#define ICPLB_ADDR8        0xFFE01120	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 8
+					 */
+#define ICPLB_ADDR9        0xFFE01124	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 9
+					 */
+#define ICPLB_ADDR10       0xFFE01128	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 10
+					 */
+#define ICPLB_ADDR11       0xFFE0112C	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 11
+					 */
+#define ICPLB_ADDR12       0xFFE01130	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 12
+					 */
+#define ICPLB_ADDR13       0xFFE01134	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 13
+					 */
+#define ICPLB_ADDR14       0xFFE01138	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 14
+					 */
+#define ICPLB_ADDR15       0xFFE0113C	/* Instruction Cacheability
+					 * Protection Lookaside Buffer 15
+					 */
+#define ICPLB_DATA0        0xFFE01200	/* Instruction Cache 0 Status */
+#define ICPLB_DATA1        0xFFE01204	/* Instruction Cache 1 Status */
+#define ICPLB_DATA2        0xFFE01208	/* Instruction Cache 2 Status */
+#define ICPLB_DATA3        0xFFE0120C	/* Instruction Cache 3 Status */
+#define ICPLB_DATA4        0xFFE01210	/* Instruction Cache 4 Status */
+#define ICPLB_DATA5        0xFFE01214	/* Instruction Cache 5 Status */
+#define ICPLB_DATA6        0xFFE01218	/* Instruction Cache 6 Status */
+#define ICPLB_DATA7        0xFFE0121C	/* Instruction Cache 7 Status */
+#define ICPLB_DATA8        0xFFE01220	/* Instruction Cache 8 Status */
+#define ICPLB_DATA9        0xFFE01224	/* Instruction Cache 9 Status */
+#define ICPLB_DATA10       0xFFE01228	/* Instruction Cache 10 Status */
+#define ICPLB_DATA11       0xFFE0122C	/* Instruction Cache 11 Status */
+#define ICPLB_DATA12       0xFFE01230	/* Instruction Cache 12 Status */
+#define ICPLB_DATA13       0xFFE01234	/* Instruction Cache 13 Status */
+#define ICPLB_DATA14       0xFFE01238	/* Instruction Cache 14 Status */
+#define ICPLB_DATA15       0xFFE0123C	/* Instruction Cache 15 Status */
+#define ITEST_COMMAND      0xFFE01300	/* Instruction Test Command Register */
+#define ITEST_DATA0        0xFFE01400	/* Instruction Test Data Register */
+#define ITEST_DATA1        0xFFE01404	/* Instruction Test Data Register */
+
+/* Event/Interrupt Controller Registers   (0xFFE02000 - 0xFFE02110) */
+
+#define EVT0               0xFFE02000	/* Event Vector 0 ESR Address */
+#define EVT1               0xFFE02004	/* Event Vector 1 ESR Address */
+#define EVT2               0xFFE02008	/* Event Vector 2 ESR Address */
+#define EVT3               0xFFE0200C	/* Event Vector 3 ESR Address */
+#define EVT4               0xFFE02010	/* Event Vector 4 ESR Address */
+#define EVT5               0xFFE02014	/* Event Vector 5 ESR Address */
+#define EVT6               0xFFE02018	/* Event Vector 6 ESR Address */
+#define EVT7               0xFFE0201C	/* Event Vector 7 ESR Address */
+#define EVT8               0xFFE02020	/* Event Vector 8 ESR Address */
+#define EVT9               0xFFE02024	/* Event Vector 9 ESR Address */
+#define EVT10              0xFFE02028	/* Event Vector 10 ESR Address */
+#define EVT11              0xFFE0202C	/* Event Vector 11 ESR Address */
+#define EVT12              0xFFE02030	/* Event Vector 12 ESR Address */
+#define EVT13              0xFFE02034	/* Event Vector 13 ESR Address */
+#define EVT14              0xFFE02038	/* Event Vector 14 ESR Address */
+#define EVT15              0xFFE0203C	/* Event Vector 15 ESR Address */
+#define IMASK              0xFFE02104	/* Interrupt Mask Register */
+#define IPEND              0xFFE02108	/* Interrupt Pending Register */
+#define ILAT               0xFFE0210C	/* Interrupt Latch Register */
+#define IPRIO              0xFFE02110	/* Core Interrupt Priority Register */
+
+/* Core Timer Registers     (0xFFE03000 - 0xFFE0300C) */
+
+#define TCNTL              0xFFE03000	/* Core Timer Control Register */
+#define TPERIOD            0xFFE03004	/* Core Timer Period Register */
+#define TSCALE             0xFFE03008	/* Core Timer Scale Register */
+#define TCOUNT             0xFFE0300C	/* Core Timer Count Register */
+
+/* Debug/MP/Emulation Registers     (0xFFE05000 - 0xFFE05008) */
+#define DSPID              0xFFE05000	/* DSP Processor ID Register for
+					 * MP implementations
+					 */
+
+#define DBGSTAT            0xFFE05008	/* Debug Status Register */
+
+/* Trace Buffer Registers     (0xFFE06000 - 0xFFE06100) */
+
+#define TBUFCTL            0xFFE06000	/* Trace Buffer Control Register */
+#define TBUFSTAT           0xFFE06004	/* Trace Buffer Status Register */
+#define TBUF               0xFFE06100	/* Trace Buffer */
+
+/* Watchpoint Control Registers (0xFFE07000 - 0xFFE07200) */
+
+/* Watchpoint Instruction Address Control Register */
+#define WPIACTL            0xFFE07000
+/* Watchpoint Instruction Address Register 0 */
+#define WPIA0              0xFFE07040
+/* Watchpoint Instruction Address Register 1 */
+#define WPIA1              0xFFE07044
+/* Watchpoint Instruction Address Register 2 */
+#define WPIA2              0xFFE07048
+/* Watchpoint Instruction Address Register 3 */
+#define WPIA3              0xFFE0704C
+/* Watchpoint Instruction Address Register 4 */
+#define WPIA4              0xFFE07050
+/* Watchpoint Instruction Address Register 5 */
+#define WPIA5              0xFFE07054
+/* Watchpoint Instruction Address Count Register 0 */
+#define WPIACNT0           0xFFE07080
+/* Watchpoint Instruction Address Count Register 1 */
+#define WPIACNT1           0xFFE07084
+/* Watchpoint Instruction Address Count Register 2 */
+#define WPIACNT2           0xFFE07088
+/* Watchpoint Instruction Address Count Register 3 */
+#define WPIACNT3           0xFFE0708C
+/* Watchpoint Instruction Address Count Register 4 */
+#define WPIACNT4           0xFFE07090
+/* Watchpoint Instruction Address Count Register 5 */
+#define WPIACNT5           0xFFE07094
+/* Watchpoint Data Address Control Register */
+#define WPDACTL            0xFFE07100
+/* Watchpoint Data Address Register 0 */
+#define WPDA0              0xFFE07140
+/* Watchpoint Data Address Register 1 */
+#define WPDA1              0xFFE07144
+/* Watchpoint Data Address Count Value Register 0 */
+#define WPDACNT0           0xFFE07180
+/* Watchpoint Data Address Count Value Register 1 */
+#define WPDACNT1           0xFFE07184
+/* Watchpoint Status Register */
+#define WPSTAT             0xFFE07200
+
+/* Performance Monitor Registers    (0xFFE08000 - 0xFFE08104) */
+
+/* Performance Monitor Control Register */
+#define PFCTL              0xFFE08000
+/* Performance Monitor Counter Register 0 */
+#define PFCNTR0            0xFFE08100
+/* Performance Monitor Counter Register 1 */
+#define PFCNTR1            0xFFE08104
+
+/****************************************************
+ * Core MMR Register Bits
+ ****************************************************/
+
+/**************************************************
+ * EVT registers (ILAT, IMASK, and IPEND).
+ **************************************************/
+
+/* Bit Positions */
+#define EVT_EMU_P        0x00000000	/* Emulator interrupt bit position */
+#define EVT_RST_P        0x00000001	/* Reset interrupt bit position */
+#define EVT_NMI_P        0x00000002	/* Non Maskable interrupt bit position */
+#define EVT_EVX_P        0x00000003	/* Exception bit position */
+#define EVT_IRPTEN_P     0x00000004	/* Global interrupt enable bit position */
+#define EVT_IVHW_P       0x00000005	/* Hardware Error interrupt bit position */
+#define EVT_IVTMR_P      0x00000006	/* Timer interrupt bit position */
+#define EVT_IVG7_P       0x00000007	/* IVG7 interrupt bit position */
+#define EVT_IVG8_P       0x00000008	/* IVG8 interrupt bit position */
+#define EVT_IVG9_P       0x00000009	/* IVG9 interrupt bit position */
+#define EVT_IVG10_P      0x0000000a	/* IVG10 interrupt bit position */
+#define EVT_IVG11_P      0x0000000b	/* IVG11 interrupt bit position */
+#define EVT_IVG12_P      0x0000000c	/* IVG12 interrupt bit position */
+#define EVT_IVG13_P      0x0000000d	/* IVG13 interrupt bit position */
+#define EVT_IVG14_P      0x0000000e	/* IVG14 interrupt bit position */
+#define EVT_IVG15_P      0x0000000f	/* IVG15 interrupt bit position */
+
+/* Masks */
+#define EVT_EMU       MK_BMSK_(EVT_EMU_P   )	/* Emulator interrupt mask */
+#define EVT_RST       MK_BMSK_(EVT_RST_P   )	/* Reset interrupt mask */
+#define EVT_NMI       MK_BMSK_(EVT_NMI_P   )	/* Non Maskable interrupt mask */
+#define EVT_EVX       MK_BMSK_(EVT_EVX_P   )	/* Exception mask */
+#define EVT_IRPTEN    MK_BMSK_(EVT_IRPTEN_P)	/* Global interrupt enable mask */
+#define EVT_IVHW      MK_BMSK_(EVT_IVHW_P  )	/* Hardware Error interrupt mask */
+#define EVT_IVTMR     MK_BMSK_(EVT_IVTMR_P )	/* Timer interrupt mask */
+#define EVT_IVG7      MK_BMSK_(EVT_IVG7_P  )	/* IVG7 interrupt mask */
+#define EVT_IVG8      MK_BMSK_(EVT_IVG8_P  )	/* IVG8 interrupt mask */
+#define EVT_IVG9      MK_BMSK_(EVT_IVG9_P  )	/* IVG9 interrupt mask */
+#define EVT_IVG10     MK_BMSK_(EVT_IVG10_P )	/* IVG10 interrupt mask */
+#define EVT_IVG11     MK_BMSK_(EVT_IVG11_P )	/* IVG11 interrupt mask */
+#define EVT_IVG12     MK_BMSK_(EVT_IVG12_P )	/* IVG12 interrupt mask */
+#define EVT_IVG13     MK_BMSK_(EVT_IVG13_P )	/* IVG13 interrupt mask */
+#define EVT_IVG14     MK_BMSK_(EVT_IVG14_P )	/* IVG14 interrupt mask */
+#define EVT_IVG15     MK_BMSK_(EVT_IVG15_P )	/* IVG15 interrupt mask */
+
+/**************************************************
+ *  DMEM_CONTROL Register
+ **************************************************/
+/* Bit Positions */
+#define ENDM_P			0x00	/* (doesn't really exist) Enable
+					 *Data Memory L1
+					 */
+#define DMCTL_ENDM_P		ENDM_P	/* "" (older define) */
+
+#define ENDCPLB_P		0x01	/* Enable DCPLBS */
+#define DMCTL_ENDCPLB_P		ENDCPLB_P	/* "" (older define) */
+#define DMC0_P			0x02	/* L1 Data Memory Configure bit 0 */
+#define DMCTL_DMC0_P		DMC0_P	/* "" (older define) */
+#define DMC1_P			0x03	/* L1 Data Memory Configure bit 1 */
+#define DMCTL_DMC1_P		DMC1_P	/* "" (older define) */
+#define DCBS_P			0x04	/* L1 Data Cache Bank Select */
+#define PORT_PREF0_P		0x12	/* DAG0 Port Preference */
+#define PORT_PREF1_P		0x13	/* DAG1 Port Preference */
+
+/* Masks */
+#define ENDM               0x00000001	/* (doesn't really exist) Enable
+					 * Data Memory L1
+					 */
+#define ENDCPLB            0x00000002	/* Enable DCPLB */
+#define ASRAM_BSRAM        0x00000000
+#define ACACHE_BSRAM       0x00000008
+#define ACACHE_BCACHE      0x0000000C
+#define DCBS               0x00000010	/*  L1 Data Cache Bank Select */
+#define PORT_PREF0	   0x00001000	/* DAG0 Port Preference */
+#define PORT_PREF1	   0x00002000	/* DAG1 Port Preference */
+
+/* IMEM_CONTROL Register */
+/* Bit Positions */
+#define ENIM_P			0x00	/* Enable L1 Code Memory  */
+#define IMCTL_ENIM_P            0x00	/* "" (older define) */
+#define ENICPLB_P		0x01	/* Enable ICPLB */
+#define IMCTL_ENICPLB_P		0x01	/* "" (older define) */
+#define IMC_P			0x02	/* Enable  */
+#define IMCTL_IMC_P		0x02	/* Configure L1 code memory as
+					 * cache (0=SRAM)
+					 */
+#define ILOC0_P			0x03	/* Lock Way 0 */
+#define ILOC1_P			0x04	/* Lock Way 1 */
+#define ILOC2_P			0x05	/* Lock Way 2 */
+#define ILOC3_P			0x06	/* Lock Way 3 */
+#define LRUPRIORST_P		0x0D	/* Least Recently Used Replacement
+					 * Priority
+					 */
+/* Masks */
+#define ENIM               0x00000001	/* Enable L1 Code Memory */
+#define ENICPLB            0x00000002	/* Enable ICPLB */
+#define IMC                0x00000004	/* Configure L1 code memory as
+					 * cache (0=SRAM)
+					 */
+#define ILOC0		   0x00000008	/* Lock Way 0 */
+#define ILOC1		   0x00000010	/* Lock Way 1 */
+#define ILOC2		   0x00000020	/* Lock Way 2 */
+#define ILOC3		   0x00000040	/* Lock Way 3 */
+#define LRUPRIORST	   0x00002000	/* Least Recently Used Replacement
+					 * Priority
+					 */
+
+/* TCNTL Masks */
+#define TMPWR              0x00000001	/* Timer Low Power Control,
+					 * 0=low power mode, 1=active state
+					 */
+#define TMREN              0x00000002	/* Timer enable, 0=disable, 1=enable */
+#define TAUTORLD           0x00000004	/* Timer auto reload */
+#define TINT               0x00000008	/* Timer generated interrupt 0=no
+					 * interrupt has been generated,
+					 * 1=interrupt has been generated
+					 * (sticky)
+					 */
+
+/* DCPLB_DATA and ICPLB_DATA Registers */
+/* Bit Positions */
+#define CPLB_VALID_P       0x00000000	/* 0=invalid entry, 1=valid entry */
+#define CPLB_LOCK_P        0x00000001	/* 0=entry may be replaced, 1=entry
+					 * locked
+					 */
+#define CPLB_USER_RD_P     0x00000002	/* 0=no read access, 1=read access
+					 * allowed (user mode)
+					 */
+/* Masks */
+#define CPLB_VALID         0x00000001	/* 0=invalid entry, 1=valid entry */
+#define CPLB_LOCK          0x00000002	/* 0=entry may be replaced, 1=entry
+					 * locked
+					 */
+#define CPLB_USER_RD       0x00000004	/* 0=no read access, 1=read access
+					 * allowed (user mode)
+					 */
+
+#define PAGE_SIZE_1KB      0x00000000	/* 1 KB page size */
+#define PAGE_SIZE_4KB      0x00010000	/* 4 KB page size */
+#define PAGE_SIZE_1MB      0x00020000	/* 1 MB page size */
+#define PAGE_SIZE_4MB      0x00030000	/* 4 MB page size */
+#define CPLB_L1SRAM        0x00000020	/* 0=SRAM mapped in L1, 0=SRAM not
+					 * mapped to L1
+					 */
+#define CPLB_PORTPRIO	   0x00000200	/* 0=low priority port, 1= high
+					 * priority port
+					 */
+#define CPLB_L1_CHBL       0x00001000	/* 0=non-cacheable in L1, 1=cacheable
+					 * in L1
+					 */
+/* ICPLB_DATA only */
+#define CPLB_LRUPRIO	   0x00000100	/* 0=can be replaced by any line,
+					 * 1=priority for non-replacement
+					 */
+/* DCPLB_DATA only */
+#define CPLB_USER_WR       0x00000008	/* 0=no write access, 0=write
+					 * access allowed (user mode)
+					 */
+#define CPLB_SUPV_WR       0x00000010	/* 0=no write access, 0=write
+					 * access allowed (supervisor mode)
+					 */
+#define CPLB_DIRTY         0x00000080	/* 1=dirty, 0=clean */
+#define CPLB_L1_AOW	   0x00008000	/* 0=do not allocate cache lines on
+					 * write-through writes,
+					 * 1= allocate cache lines on
+					 * write-through writes.
+					 */
+#define CPLB_WT            0x00004000	/* 0=write-back, 1=write-through */
+
+#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR
+
+/* TBUFCTL Masks */
+#define TBUFPWR            0x0001
+#define TBUFEN             0x0002
+#define TBUFOVF            0x0004
+#define TBUFCMPLP_SINGLE   0x0008
+#define TBUFCMPLP_DOUBLE   0x0010
+#define TBUFCMPLP          (TBUFCMPLP_SINGLE | TBUFCMPLP_DOUBLE)
+
+/* TBUFSTAT Masks */
+#define TBUFCNT            0x001F
+
+/* ITEST_COMMAND and DTEST_COMMAND Registers */
+/* Masks */
+#define TEST_READ	   0x00000000	/* Read Access */
+#define TEST_WRITE	   0x00000002	/* Write Access */
+#define TEST_TAG	   0x00000000	/* Access TAG */
+#define TEST_DATA	   0x00000004	/* Access DATA */
+#define TEST_DW0	   0x00000000	/* Select Double Word 0 */
+#define TEST_DW1	   0x00000008	/* Select Double Word 1 */
+#define TEST_DW2	   0x00000010	/* Select Double Word 2 */
+#define TEST_DW3	   0x00000018	/* Select Double Word 3 */
+#define TEST_MB0	   0x00000000	/* Select Mini-Bank 0 */
+#define TEST_MB1	   0x00010000	/* Select Mini-Bank 1 */
+#define TEST_MB2	   0x00020000	/* Select Mini-Bank 2 */
+#define TEST_MB3	   0x00030000	/* Select Mini-Bank 3 */
+#define TEST_SET(x)	   ((x << 5) & 0x03E0)	/* Set Index 0->31 */
+#define TEST_WAY0	   0x00000000	/* Access Way0 */
+#define TEST_WAY1	   0x04000000	/* Access Way1 */
+/* ITEST_COMMAND only */
+#define TEST_WAY2	   0x08000000	/* Access Way2 */
+#define TEST_WAY3	   0x0C000000	/* Access Way3 */
+/* DTEST_COMMAND only */
+#define TEST_BNKSELA	   0x00000000	/* Access SuperBank A */
+#define TEST_BNKSELB	   0x00800000	/* Access SuperBank B */
+
+#endif				/* _DEF_LPBLACKFIN_H */
diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h
new file mode 100644
index 00000000000..0889c3abb59
--- /dev/null
+++ b/arch/blackfin/include/asm/delay.h
@@ -0,0 +1,62 @@
+/*
+ * delay.h - delay functions
+ *
+ * Copyright (c) 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_DELAY_H__
+#define __ASM_DELAY_H__
+
+#include <mach/anomaly.h>
+
+static inline void __delay(unsigned long loops)
+{
+	if (ANOMALY_05000312) {
+		/* Interrupted loads to loop registers -> bad */
+		unsigned long tmp;
+		__asm__ __volatile__(
+			"[--SP] = LC0;"
+			"[--SP] = LT0;"
+			"[--SP] = LB0;"
+			"LSETUP (1f,1f) LC0 = %1;"
+			"1: NOP;"
+			/* We take advantage of the fact that LC0 is 0 at
+			 * the end of the loop.  Otherwise we'd need some
+			 * NOPs after the CLI here.
+			 */
+			"CLI %0;"
+			"LB0 = [SP++];"
+			"LT0 = [SP++];"
+			"LC0 = [SP++];"
+			"STI %0;"
+			: "=d" (tmp)
+			: "a" (loops)
+		);
+	} else
+		__asm__ __volatile__ (
+			"LSETUP(1f, 1f) LC0 = %0;"
+			"1: NOP;"
+			:
+			: "a" (loops)
+			: "LT0", "LB0", "LC0"
+		);
+}
+
+#include <linux/param.h>	/* needed for HZ */
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+static inline void udelay(unsigned long usecs)
+{
+	extern unsigned long loops_per_jiffy;
+	__delay(usecs * loops_per_jiffy / (1000000 / HZ));
+}
+
+#endif
diff --git a/arch/blackfin/include/asm/device.h b/arch/blackfin/include/asm/device.h
new file mode 100644
index 00000000000..d8f9872b0e2
--- /dev/null
+++ b/arch/blackfin/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/blackfin/include/asm/div64.h b/arch/blackfin/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/blackfin/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..1a13c2fc366
--- /dev/null
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -0,0 +1,83 @@
+#ifndef _BLACKFIN_DMA_MAPPING_H
+#define _BLACKFIN_DMA_MAPPING_H
+
+#include <asm/scatterlist.h>
+
+void dma_alloc_init(unsigned long start, unsigned long end);
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t gfp);
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+		       dma_addr_t dma_handle);
+
+/*
+ * Now for the API extensions over the pci_ one
+ */
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+#define dma_mapping_error
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+				 enum dma_data_direction direction);
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+/*
+ * Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+			  enum dma_data_direction direction);
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
+	       enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, dma_addr, size, dir);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction direction);
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		      int nhwentries, enum dma_data_direction direction);
+
+#endif				/* _BLACKFIN_DMA_MAPPING_H */
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
new file mode 100644
index 00000000000..6509733bb0f
--- /dev/null
+++ b/arch/blackfin/include/asm/dma.h
@@ -0,0 +1,205 @@
+/*
+ * File:         include/asm-blackfin/simple_bf533_dma.h
+ * Based on:     none - original work
+ * Author:       LG Soft India
+ *               Copyright (C) 2004-2005 Analog Devices Inc.
+ * Created:      Tue Sep 21 2004
+ * Description:  This file contains the major Data structures and constants
+ * 		 used for DMA Implementation in BF533
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BLACKFIN_DMA_H_
+#define _BLACKFIN_DMA_H_
+
+#include <asm/io.h>
+#include <linux/slab.h>
+#include <asm/irq.h>
+#include <asm/signal.h>
+
+#include <linux/kernel.h>
+#include <mach/dma.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <asm/blackfin.h>
+
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/*****************************************************************************
+*        Generic DMA  Declarations
+*
+****************************************************************************/
+enum dma_chan_status {
+	DMA_CHANNEL_FREE,
+	DMA_CHANNEL_REQUESTED,
+	DMA_CHANNEL_ENABLED,
+};
+
+/*-------------------------
+ * config reg bits value
+ *-------------------------*/
+#define DATA_SIZE_8 		0
+#define DATA_SIZE_16 		1
+#define DATA_SIZE_32 		2
+
+#define DMA_FLOW_STOP 		0
+#define DMA_FLOW_AUTO 		1
+#define DMA_FLOW_ARRAY 		4
+#define DMA_FLOW_SMALL 		6
+#define DMA_FLOW_LARGE 		7
+
+#define DIMENSION_LINEAR    0
+#define DIMENSION_2D           1
+
+#define DIR_READ     0
+#define DIR_WRITE    1
+
+#define INTR_DISABLE   0
+#define INTR_ON_BUF    2
+#define INTR_ON_ROW    3
+
+#define DMA_NOSYNC_KEEP_DMA_BUF	0
+#define DMA_SYNC_RESTART	1
+
+struct dmasg {
+	unsigned long next_desc_addr;
+	unsigned long start_addr;
+	unsigned short cfg;
+	unsigned short x_count;
+	short x_modify;
+	unsigned short y_count;
+	short y_modify;
+} __attribute__((packed));
+
+struct dma_register {
+	unsigned long next_desc_ptr;	/* DMA Next Descriptor Pointer register */
+	unsigned long start_addr;	/* DMA Start address  register */
+
+	unsigned short cfg;	/* DMA Configuration register */
+	unsigned short dummy1;	/* DMA Configuration register */
+
+	unsigned long reserved;
+
+	unsigned short x_count;	/* DMA x_count register */
+	unsigned short dummy2;
+
+	short x_modify;	/* DMA x_modify register */
+	unsigned short dummy3;
+
+	unsigned short y_count;	/* DMA y_count register */
+	unsigned short dummy4;
+
+	short y_modify;	/* DMA y_modify register */
+	unsigned short dummy5;
+
+	unsigned long curr_desc_ptr;	/* DMA Current Descriptor Pointer
+					   register */
+	unsigned long curr_addr_ptr;	/* DMA Current Address Pointer
+						   register */
+	unsigned short irq_status;	/* DMA irq status register */
+	unsigned short dummy6;
+
+	unsigned short peripheral_map;	/* DMA peripheral map register */
+	unsigned short dummy7;
+
+	unsigned short curr_x_count;	/* DMA Current x-count register */
+	unsigned short dummy8;
+
+	unsigned long reserved2;
+
+	unsigned short curr_y_count;	/* DMA Current y-count register */
+	unsigned short dummy9;
+
+	unsigned long reserved3;
+
+};
+
+typedef irqreturn_t(*dma_interrupt_t) (int irq, void *dev_id);
+
+struct dma_channel {
+	struct mutex dmalock;
+	char *device_id;
+	enum dma_chan_status chan_status;
+	struct dma_register *regs;
+	struct dmasg *sg;		/* large mode descriptor */
+	unsigned int ctrl_num;	/* controller number */
+	dma_interrupt_t irq_callback;
+	void *data;
+	unsigned int dma_enable_flag;
+	unsigned int loopback_flag;
+#ifdef CONFIG_PM
+	unsigned short saved_peripheral_map;
+#endif
+};
+
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void);
+void blackfin_dma_resume(void);
+#endif
+
+/*******************************************************************************
+*	DMA API's
+*******************************************************************************/
+/* functions to set register mode */
+void set_dma_start_addr(unsigned int channel, unsigned long addr);
+void set_dma_next_desc_addr(unsigned int channel, unsigned long addr);
+void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr);
+void set_dma_x_count(unsigned int channel, unsigned short x_count);
+void set_dma_x_modify(unsigned int channel, short x_modify);
+void set_dma_y_count(unsigned int channel, unsigned short y_count);
+void set_dma_y_modify(unsigned int channel, short y_modify);
+void set_dma_config(unsigned int channel, unsigned short config);
+unsigned short set_bfin_dma_config(char direction, char flow_mode,
+				   char intr_mode, char dma_mode, char width,
+				   char syncmode);
+void set_dma_curr_addr(unsigned int channel, unsigned long addr);
+
+/* get curr status for polling */
+unsigned short get_dma_curr_irqstat(unsigned int channel);
+unsigned short get_dma_curr_xcount(unsigned int channel);
+unsigned short get_dma_curr_ycount(unsigned int channel);
+unsigned long get_dma_next_desc_ptr(unsigned int channel);
+unsigned long get_dma_curr_desc_ptr(unsigned int channel);
+unsigned long get_dma_curr_addr(unsigned int channel);
+
+/* set large DMA mode descriptor */
+void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg);
+
+/* check if current channel is in use */
+int dma_channel_active(unsigned int channel);
+
+/* common functions must be called in any mode */
+void free_dma(unsigned int channel);
+int dma_channel_active(unsigned int channel); /* check if a channel is in use */
+void disable_dma(unsigned int channel);
+void enable_dma(unsigned int channel);
+int request_dma(unsigned int channel, char *device_id);
+int set_dma_callback(unsigned int channel, dma_interrupt_t callback,
+		     void *data);
+void dma_disable_irq(unsigned int channel);
+void dma_enable_irq(unsigned int channel);
+void clear_dma_irqstat(unsigned int channel);
+void *dma_memcpy(void *dest, const void *src, size_t count);
+void *safe_dma_memcpy(void *dest, const void *src, size_t count);
+
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL];
+
+#endif
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
new file mode 100644
index 00000000000..96e8208f929
--- /dev/null
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -0,0 +1,57 @@
+/*
+ * include/asm-blackfin/dpmc.h -  Miscellaneous IOCTL commands for Dynamic Power
+ *   			 	Management Controller Driver.
+ * Copyright (C) 2004-2008 Analog Device Inc.
+ *
+ */
+#ifndef _BLACKFIN_DPMC_H_
+#define _BLACKFIN_DPMC_H_
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void do_hibernate(int wakeup);
+void set_dram_srfs(void);
+void unset_dram_srfs(void);
+
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+
+struct bfin_dpmc_platform_data {
+	const unsigned int *tuple_tab;
+	unsigned short tabsize;
+	unsigned short vr_settling_time; /* in us */
+};
+
+#else
+
+#define PM_PUSH(x) \
+	R0 = [P0 + (x - SRAM_BASE_ADDRESS)];\
+	[--SP] =  R0;\
+
+#define PM_POP(x) \
+	R0 = [SP++];\
+	[P0 + (x - SRAM_BASE_ADDRESS)] = R0;\
+
+#define PM_SYS_PUSH(x) \
+	R0 = [P0 + (x - PLL_CTL)];\
+	[--SP] =  R0;\
+
+#define PM_SYS_POP(x) \
+	R0 = [SP++];\
+	[P0 + (x - PLL_CTL)] = R0;\
+
+#define PM_SYS_PUSH16(x) \
+	R0 = w[P0 + (x - PLL_CTL)];\
+	[--SP] =  R0;\
+
+#define PM_SYS_POP16(x) \
+	R0 = [SP++];\
+	w[P0 + (x - PLL_CTL)] = R0;\
+
+#endif
+#endif	/* __KERNEL__ */
+
+#endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/arch/blackfin/include/asm/early_printk.h b/arch/blackfin/include/asm/early_printk.h
new file mode 100644
index 00000000000..110f1c1f845
--- /dev/null
+++ b/arch/blackfin/include/asm/early_printk.h
@@ -0,0 +1,28 @@
+/*
+ * File:         include/asm-blackfin/early_printk.h
+ * Author:       Robin Getz <rgetz@blackfin.uclinux.org
+ *
+ * Created:      14Aug2007
+ * Description:  function prototpyes for early printk
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifdef CONFIG_EARLY_PRINTK
+extern int setup_early_printk(char *);
+#else
+#define setup_early_printk(fmt) do { } while (0)
+#endif /* CONFIG_EARLY_PRINTK */
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
new file mode 100644
index 00000000000..67a03a8a353
--- /dev/null
+++ b/arch/blackfin/include/asm/elf.h
@@ -0,0 +1,127 @@
+/* Changes made by  LG Soft Oct 2004*/
+
+#ifndef __ASMBFIN_ELF_H
+#define __ASMBFIN_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* Processor specific flags for the ELF header e_flags field.  */
+#define EF_BFIN_PIC		0x00000001	/* -fpic */
+#define EF_BFIN_FDPIC		0x00000002	/* -mfdpic */
+#define EF_BFIN_CODE_IN_L1	0x00000010	/* --code-in-l1 */
+#define EF_BFIN_DATA_IN_L1	0x00000020	/* --data-in-l1 */
+#define EF_BFIN_CODE_IN_L2	0x00000040	/* --code-in-l2 */
+#define EF_BFIN_DATA_IN_L2	0x00000080	/* --data-in-l2 */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_bfinfp_struct elf_fpregset_t;
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_BLACKFIN)
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_BFIN_FDPIC /* && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS) */)
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_BFIN_PIC)
+
+/* EM_BLACKFIN defined in linux/elf.h	*/
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_BLACKFIN
+
+#define ELF_PLAT_INIT(_r)	_r->p1 = 0
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr)	\
+do {											\
+	_regs->r7	= 0;						\
+	_regs->p0	= _exec_map_addr;				\
+	_regs->p1	= _interp_map_addr;				\
+	_regs->p2	= _dynamic_addr;				\
+} while(0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
+#define ELF_EXEC_PAGESIZE	4096
+
+#define	R_unused0	0	/* relocation type 0 is not defined */
+#define R_pcrel5m2	1	/*LSETUP part a */
+#define R_unused1	2	/* relocation type 2 is not defined */
+#define R_pcrel10	3	/* type 3, if cc jump <target>  */
+#define R_pcrel12_jump	4	/* type 4, jump <target> */
+#define R_rimm16	5	/* type 0x5, rN = <target> */
+#define R_luimm16	6	/* # 0x6, preg.l=<target> Load imm 16 to lower half */
+#define R_huimm16  	7	/* # 0x7, preg.h=<target> Load imm 16 to upper half */
+#define R_pcrel12_jump_s 8	/* # 0x8 jump.s <target> */
+#define R_pcrel24_jump_x 9	/* # 0x9 jump.x <target> */
+#define R_pcrel24       10	/* # 0xa call <target> , not expandable */
+#define R_unusedb       11	/* # 0xb not generated */
+#define R_unusedc       12	/* # 0xc  not used */
+#define R_pcrel24_jump_l 13	/*0xd jump.l <target> */
+#define R_pcrel24_call_x 14	/* 0xE, call.x <target> if <target> is above 24 bit limit call through P1 */
+#define R_var_eq_symb    15	/* 0xf, linker should treat it same as 0x12 */
+#define R_byte_data      16	/* 0x10, .byte var = symbol */
+#define R_byte2_data     17	/* 0x11, .byte2 var = symbol */
+#define R_byte4_data     18	/* 0x12, .byte4 var = symbol and .var var=symbol */
+#define R_pcrel11        19	/* 0x13, lsetup part b */
+#define R_unused14      20	/* 0x14, undefined */
+#define R_unused15       21	/* not generated by VDSP 3.5 */
+
+/* arithmetic relocations */
+#define R_push		 0xE0
+#define R_const		 0xE1
+#define R_add		 0xE2
+#define R_sub		 0xE3
+#define R_mult		 0xE4
+#define R_div		 0xE5
+#define R_mod		 0xE6
+#define R_lshift	 0xE7
+#define R_rshift	 0xE8
+#define R_and		 0xE9
+#define R_or		 0xEA
+#define R_xor		 0xEB
+#define R_land		 0xEC
+#define R_lor		 0xED
+#define R_len		 0xEE
+#define R_neg		 0xEF
+#define R_comp		 0xF0
+#define R_page		 0xF1
+#define R_hwpage	 0xF2
+#define R_addr		 0xF3
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+        memcpy((char *) &pr_reg, (char *)regs,  \
+               sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif
diff --git a/arch/blackfin/include/asm/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..27f6c785d10
--- /dev/null
+++ b/arch/blackfin/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif				/* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h
new file mode 100644
index 00000000000..c4f721e0d00
--- /dev/null
+++ b/arch/blackfin/include/asm/entry.h
@@ -0,0 +1,61 @@
+#ifndef __BFIN_ENTRY_H
+#define __BFIN_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+
+#define	LFLUSH_I_AND_D	0x00000808
+#define	LSIGTRAP	5
+
+/* process bits for task_struct.flags */
+#define	PF_TRACESYS_OFF	3
+#define	PF_TRACESYS_BIT	5
+#define	PF_PTRACED_OFF	3
+#define	PF_PTRACED_BIT	4
+#define	PF_DTRACE_OFF	1
+#define	PF_DTRACE_BIT	5
+
+/*
+ * NOTE!  The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
+/* This one is used for exceptions, emulation, and NMI.  It doesn't push
+   RETI and doesn't do cli.  */
+#define SAVE_ALL_SYS		save_context_no_interrupts
+/* This is used for all normal interrupts.  It saves a minimum of registers
+   to the stack, loads the IRQ number, and jumps to common code.  */
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+									\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R0 = (N);								\
+    jump __common_int_entry;
+
+/* For timer interrupts, we need to save IPEND, since the user_mode
+	   macro accesses it to determine where to account time.  */
+#define TIMER_INTERRUPT_ENTRY(N)					\
+    [--sp] = SYSCFG;							\
+									\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    jump __common_int_entry;
+
+/* This one pushes RETI without using CLI.  Interrupts are enabled.  */
+#define SAVE_CONTEXT_SYSCALL	save_context_syscall
+#define SAVE_CONTEXT		save_context_with_interrupts
+
+#define RESTORE_ALL_SYS		restore_context_no_interrupts
+#define RESTORE_CONTEXT		restore_context_with_interrupts
+
+#endif				/* __ASSEMBLY__ */
+#endif				/* __BFIN_ENTRY_H */
diff --git a/arch/blackfin/include/asm/errno.h b/arch/blackfin/include/asm/errno.h
new file mode 100644
index 00000000000..164e4f39bb5
--- /dev/null
+++ b/arch/blackfin/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef _BFIN_ERRNO_H
+#define _BFIN_ERRNO_H
+
+#include<asm-generic/errno.h>
+
+#endif				/* _BFIN_ERRNO_H */
diff --git a/arch/blackfin/include/asm/fb.h b/arch/blackfin/include/asm/fb.h
new file mode 100644
index 00000000000..c7df3803099
--- /dev/null
+++ b/arch/blackfin/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/asm/fcntl.h
new file mode 100644
index 00000000000..9c403712785
--- /dev/null
+++ b/arch/blackfin/include/asm/fcntl.h
@@ -0,0 +1,13 @@
+#ifndef _BFIN_FCNTL_H
+#define _BFIN_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h
new file mode 100644
index 00000000000..32c4d495d84
--- /dev/null
+++ b/arch/blackfin/include/asm/fixed_code.h
@@ -0,0 +1,46 @@
+/* This file defines the fixed addresses where userspace programs can find
+   atomic code sequences.  */
+
+#ifndef __BFIN_ASM_FIXED_CODE_H__
+#define __BFIN_ASM_FIXED_CODE_H__
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+#include <linux/ptrace.h>
+extern asmlinkage void finish_atomic_sections(struct pt_regs *regs);
+extern char fixed_code_start;
+extern char fixed_code_end;
+extern int atomic_xchg32(void);
+extern int atomic_cas32(void);
+extern int atomic_add32(void);
+extern int atomic_sub32(void);
+extern int atomic_ior32(void);
+extern int atomic_and32(void);
+extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
+extern void sigreturn_stub(void);
+#endif
+#endif
+
+#define FIXED_CODE_START	0x400
+
+#define SIGRETURN_STUB		0x400
+
+#define ATOMIC_SEQS_START	0x410
+
+#define ATOMIC_XCHG32		0x410
+#define ATOMIC_CAS32		0x420
+#define ATOMIC_ADD32		0x430
+#define ATOMIC_SUB32		0x440
+#define ATOMIC_IOR32		0x450
+#define ATOMIC_AND32		0x460
+#define ATOMIC_XOR32		0x470
+
+#define ATOMIC_SEQS_END		0x480
+
+#define SAFE_USER_INSTRUCTION   0x480
+
+#define FIXED_CODE_END		0x490
+
+#endif
diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h
new file mode 100644
index 00000000000..e70074e05f4
--- /dev/null
+++ b/arch/blackfin/include/asm/flat.h
@@ -0,0 +1,58 @@
+/*
+ * include/asm-blackfin/flat.h -- uClinux flat-format executables
+ *
+ * Copyright (C) 2003,
+ *
+ */
+
+#ifndef __BLACKFIN_FLAT_H__
+#define __BLACKFIN_FLAT_H__
+
+#include <asm/unaligned.h>
+
+#define	flat_stack_align(sp)	/* nothing needed */
+#define	flat_argvp_envp_on_stack()		0
+#define	flat_old_ram_flag(flags)		(flags)
+
+extern unsigned long bfin_get_addr_from_rp (unsigned long *ptr,
+					unsigned long relval,
+					unsigned long flags,
+					unsigned long *persistent);
+
+extern void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr,
+		                unsigned long relval);
+
+/* The amount by which a relocation can exceed the program image limits
+   without being regarded as an error.  */
+
+#define	flat_reloc_valid(reloc, size)	((reloc) <= (size))
+
+#define	flat_get_addr_from_rp(rp, relval, flags, persistent)	\
+	bfin_get_addr_from_rp(rp, relval, flags, persistent)
+#define	flat_put_addr_at_rp(rp, val, relval)	\
+	bfin_put_addr_at_rp(rp, val, relval)
+
+/* Convert a relocation entry into an address.  */
+static inline unsigned long
+flat_get_relocate_addr (unsigned long relval)
+{
+	return relval & 0x03ffffff; /* Mask out top 6 bits */
+}
+
+static inline int flat_set_persistent(unsigned long relval,
+				      unsigned long *persistent)
+{
+	int type = (relval >> 26) & 7;
+	if (type == 3) {
+		*persistent = relval << 16;
+		return 1;
+	}
+	return 0;
+}
+
+static inline int flat_addr_absolute(unsigned long relval)
+{
+	return (relval & (1 << 29)) != 0;
+}
+
+#endif				/* __BLACKFIN_FLAT_H__ */
diff --git a/arch/blackfin/include/asm/futex.h b/arch/blackfin/include/asm/futex.h
new file mode 100644
index 00000000000..6a332a9f099
--- /dev/null
+++ b/arch/blackfin/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
new file mode 100644
index 00000000000..ad33ac271fd
--- /dev/null
+++ b/arch/blackfin/include/asm/gpio.h
@@ -0,0 +1,456 @@
+/*
+ * File:         arch/blackfin/kernel/bfin_gpio.h
+ * Based on:
+ * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+/*
+*  Number     BF537/6/4    BF561    BF533/2/1
+*             BF527/5/2
+*
+*  GPIO_0       PF0         PF0        PF0
+*  GPIO_1       PF1         PF1        PF1
+*  GPIO_2       PF2         PF2        PF2
+*  GPIO_3       PF3         PF3        PF3
+*  GPIO_4       PF4         PF4        PF4
+*  GPIO_5       PF5         PF5        PF5
+*  GPIO_6       PF6         PF6        PF6
+*  GPIO_7       PF7         PF7        PF7
+*  GPIO_8       PF8         PF8        PF8
+*  GPIO_9       PF9         PF9        PF9
+*  GPIO_10      PF10        PF10       PF10
+*  GPIO_11      PF11        PF11       PF11
+*  GPIO_12      PF12        PF12       PF12
+*  GPIO_13      PF13        PF13       PF13
+*  GPIO_14      PF14        PF14       PF14
+*  GPIO_15      PF15        PF15       PF15
+*  GPIO_16      PG0         PF16
+*  GPIO_17      PG1         PF17
+*  GPIO_18      PG2         PF18
+*  GPIO_19      PG3         PF19
+*  GPIO_20      PG4         PF20
+*  GPIO_21      PG5         PF21
+*  GPIO_22      PG6         PF22
+*  GPIO_23      PG7         PF23
+*  GPIO_24      PG8         PF24
+*  GPIO_25      PG9         PF25
+*  GPIO_26      PG10        PF26
+*  GPIO_27      PG11        PF27
+*  GPIO_28      PG12        PF28
+*  GPIO_29      PG13        PF29
+*  GPIO_30      PG14        PF30
+*  GPIO_31      PG15        PF31
+*  GPIO_32      PH0         PF32
+*  GPIO_33      PH1         PF33
+*  GPIO_34      PH2         PF34
+*  GPIO_35      PH3         PF35
+*  GPIO_36      PH4         PF36
+*  GPIO_37      PH5         PF37
+*  GPIO_38      PH6         PF38
+*  GPIO_39      PH7         PF39
+*  GPIO_40      PH8         PF40
+*  GPIO_41      PH9         PF41
+*  GPIO_42      PH10        PF42
+*  GPIO_43      PH11        PF43
+*  GPIO_44      PH12        PF44
+*  GPIO_45      PH13        PF45
+*  GPIO_46      PH14        PF46
+*  GPIO_47      PH15        PF47
+*/
+
+#ifndef __ARCH_BLACKFIN_GPIO_H__
+#define __ARCH_BLACKFIN_GPIO_H__
+
+#define gpio_bank(x) ((x) >> 4)
+#define gpio_bit(x)  (1<<((x) & 0xF))
+#define gpio_sub_n(x) ((x) & 0xF)
+
+#define GPIO_BANKSIZE 16
+
+#define	GPIO_0	0
+#define	GPIO_1	1
+#define	GPIO_2	2
+#define	GPIO_3	3
+#define	GPIO_4	4
+#define	GPIO_5	5
+#define	GPIO_6	6
+#define	GPIO_7	7
+#define	GPIO_8	8
+#define	GPIO_9	9
+#define	GPIO_10	10
+#define	GPIO_11	11
+#define	GPIO_12	12
+#define	GPIO_13	13
+#define	GPIO_14	14
+#define	GPIO_15	15
+#define	GPIO_16	16
+#define	GPIO_17	17
+#define	GPIO_18	18
+#define	GPIO_19	19
+#define	GPIO_20	20
+#define	GPIO_21	21
+#define	GPIO_22	22
+#define	GPIO_23	23
+#define	GPIO_24	24
+#define	GPIO_25	25
+#define	GPIO_26	26
+#define	GPIO_27	27
+#define	GPIO_28	28
+#define	GPIO_29	29
+#define	GPIO_30	30
+#define	GPIO_31	31
+#define	GPIO_32	32
+#define	GPIO_33	33
+#define	GPIO_34	34
+#define	GPIO_35	35
+#define	GPIO_36	36
+#define	GPIO_37	37
+#define	GPIO_38	38
+#define	GPIO_39	39
+#define	GPIO_40	40
+#define	GPIO_41	41
+#define	GPIO_42	42
+#define	GPIO_43	43
+#define	GPIO_44	44
+#define	GPIO_45	45
+#define	GPIO_46	46
+#define	GPIO_47	47
+
+
+#define PERIPHERAL_USAGE 1
+#define GPIO_USAGE 0
+
+#ifdef BF533_FAMILY
+#define MAX_BLACKFIN_GPIOS 16
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+
+#endif
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#define MAX_BLACKFIN_GPIOS 48
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+#define	GPIO_PG0	16
+#define	GPIO_PG1	17
+#define	GPIO_PG2	18
+#define	GPIO_PG3	19
+#define	GPIO_PG4	20
+#define	GPIO_PG5	21
+#define	GPIO_PG6	22
+#define	GPIO_PG7	23
+#define	GPIO_PG8	24
+#define	GPIO_PG9	25
+#define	GPIO_PG10      	26
+#define	GPIO_PG11      	27
+#define	GPIO_PG12      	28
+#define	GPIO_PG13      	29
+#define	GPIO_PG14      	30
+#define	GPIO_PG15      	31
+#define	GPIO_PH0	32
+#define	GPIO_PH1	33
+#define	GPIO_PH2	34
+#define	GPIO_PH3	35
+#define	GPIO_PH4	36
+#define	GPIO_PH5	37
+#define	GPIO_PH6	38
+#define	GPIO_PH7	39
+#define	GPIO_PH8	40
+#define	GPIO_PH9	41
+#define	GPIO_PH10      	42
+#define	GPIO_PH11      	43
+#define	GPIO_PH12      	44
+#define	GPIO_PH13      	45
+#define	GPIO_PH14      	46
+#define	GPIO_PH15      	47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#endif
+
+#ifdef BF548_FAMILY
+#include <mach/gpio.h>
+#endif
+
+#ifdef BF561_FAMILY
+#define MAX_BLACKFIN_GPIOS 48
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+#define	GPIO_PF16	16
+#define	GPIO_PF17	17
+#define	GPIO_PF18	18
+#define	GPIO_PF19	19
+#define	GPIO_PF20	20
+#define	GPIO_PF21	21
+#define	GPIO_PF22	22
+#define	GPIO_PF23	23
+#define	GPIO_PF24	24
+#define	GPIO_PF25	25
+#define	GPIO_PF26	26
+#define	GPIO_PF27	27
+#define	GPIO_PF28	28
+#define	GPIO_PF29	29
+#define	GPIO_PF30	30
+#define	GPIO_PF31	31
+#define	GPIO_PF32	32
+#define	GPIO_PF33	33
+#define	GPIO_PF34	34
+#define	GPIO_PF35	35
+#define	GPIO_PF36	36
+#define	GPIO_PF37	37
+#define	GPIO_PF38	38
+#define	GPIO_PF39	39
+#define	GPIO_PF40	40
+#define	GPIO_PF41	41
+#define	GPIO_PF42	42
+#define	GPIO_PF43	43
+#define	GPIO_PF44	44
+#define	GPIO_PF45	45
+#define	GPIO_PF46	46
+#define	GPIO_PF47	47
+
+#define PORT_FIO0 GPIO_0
+#define PORT_FIO1 GPIO_16
+#define PORT_FIO2 GPIO_32
+#endif
+
+#ifndef __ASSEMBLY__
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin General Purpose Ports Access Functions
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: These functions abstract direct register access
+*              to Blackfin processor General Purpose
+*              Ports Regsiters
+*
+* CAUTION: These functions do not belong to the GPIO Driver API
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+#ifndef BF548_FAMILY
+void set_gpio_dir(unsigned, unsigned short);
+void set_gpio_inen(unsigned, unsigned short);
+void set_gpio_polar(unsigned, unsigned short);
+void set_gpio_edge(unsigned, unsigned short);
+void set_gpio_both(unsigned, unsigned short);
+void set_gpio_data(unsigned, unsigned short);
+void set_gpio_maska(unsigned, unsigned short);
+void set_gpio_maskb(unsigned, unsigned short);
+void set_gpio_toggle(unsigned);
+void set_gpiop_dir(unsigned, unsigned short);
+void set_gpiop_inen(unsigned, unsigned short);
+void set_gpiop_polar(unsigned, unsigned short);
+void set_gpiop_edge(unsigned, unsigned short);
+void set_gpiop_both(unsigned, unsigned short);
+void set_gpiop_data(unsigned, unsigned short);
+void set_gpiop_maska(unsigned, unsigned short);
+void set_gpiop_maskb(unsigned, unsigned short);
+unsigned short get_gpio_dir(unsigned);
+unsigned short get_gpio_inen(unsigned);
+unsigned short get_gpio_polar(unsigned);
+unsigned short get_gpio_edge(unsigned);
+unsigned short get_gpio_both(unsigned);
+unsigned short get_gpio_maska(unsigned);
+unsigned short get_gpio_maskb(unsigned);
+unsigned short get_gpio_data(unsigned);
+unsigned short get_gpiop_dir(unsigned);
+unsigned short get_gpiop_inen(unsigned);
+unsigned short get_gpiop_polar(unsigned);
+unsigned short get_gpiop_edge(unsigned);
+unsigned short get_gpiop_both(unsigned);
+unsigned short get_gpiop_maska(unsigned);
+unsigned short get_gpiop_maskb(unsigned);
+unsigned short get_gpiop_data(unsigned);
+
+struct gpio_port_t {
+	unsigned short data;
+	unsigned short dummy1;
+	unsigned short data_clear;
+	unsigned short dummy2;
+	unsigned short data_set;
+	unsigned short dummy3;
+	unsigned short toggle;
+	unsigned short dummy4;
+	unsigned short maska;
+	unsigned short dummy5;
+	unsigned short maska_clear;
+	unsigned short dummy6;
+	unsigned short maska_set;
+	unsigned short dummy7;
+	unsigned short maska_toggle;
+	unsigned short dummy8;
+	unsigned short maskb;
+	unsigned short dummy9;
+	unsigned short maskb_clear;
+	unsigned short dummy10;
+	unsigned short maskb_set;
+	unsigned short dummy11;
+	unsigned short maskb_toggle;
+	unsigned short dummy12;
+	unsigned short dir;
+	unsigned short dummy13;
+	unsigned short polar;
+	unsigned short dummy14;
+	unsigned short edge;
+	unsigned short dummy15;
+	unsigned short both;
+	unsigned short dummy16;
+	unsigned short inen;
+};
+#endif
+
+#ifdef CONFIG_PM
+
+unsigned int bfin_pm_standby_setup(void);
+void bfin_pm_standby_restore(void);
+
+void bfin_gpio_pm_hibernate_restore(void);
+void bfin_gpio_pm_hibernate_suspend(void);
+
+#ifndef CONFIG_BF54x
+#define PM_WAKE_RISING	0x1
+#define PM_WAKE_FALLING	0x2
+#define PM_WAKE_HIGH	0x4
+#define PM_WAKE_LOW	0x8
+#define PM_WAKE_BOTH_EDGES	(PM_WAKE_RISING | PM_WAKE_FALLING)
+#define PM_WAKE_IGNORE	0xF0
+
+int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
+void gpio_pm_wakeup_free(unsigned gpio);
+
+struct gpio_port_s {
+	unsigned short data;
+	unsigned short maska;
+	unsigned short maskb;
+	unsigned short dir;
+	unsigned short polar;
+	unsigned short edge;
+	unsigned short both;
+	unsigned short inen;
+
+	unsigned short fer;
+	unsigned short reserved;
+	unsigned short mux;
+};
+#endif /*CONFIG_BF54x*/
+#endif /*CONFIG_PM*/
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int gpio_request(unsigned, const char *);
+void gpio_free(unsigned);
+
+void gpio_set_value(unsigned gpio, int arg);
+int gpio_get_value(unsigned gpio);
+
+#ifndef BF548_FAMILY
+#define gpio_set_value(gpio, value)	set_gpio_data(gpio, value)
+#endif
+
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+#include <asm/irq.h>
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return (gpio + GPIO_IRQ_BASE);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return (irq - GPIO_IRQ_BASE);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ARCH_BLACKFIN_GPIO_H__ */
diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
new file mode 100644
index 00000000000..0520d2aac8f
--- /dev/null
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -0,0 +1,191 @@
+/*
+ * gptimers.h - Blackfin General Purpose Timer structs/defines/prototypes
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ * Copyright (C) 2005 John DeHority
+ * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de)
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef _BLACKFIN_TIMERS_H_
+#define _BLACKFIN_TIMERS_H_
+
+#include <linux/types.h>
+#include <asm/blackfin.h>
+
+/*
+ * BF537/BF527: 8 timers:
+ */
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+# define MAX_BLACKFIN_GPTIMERS 8
+# define TIMER0_GROUP_REG      TIMER_ENABLE
+#endif
+/*
+ * BF54x: 11 timers (BF542: 8 timers):
+ */
+#if defined(BF548_FAMILY)
+# ifdef CONFIG_BF542
+#  define MAX_BLACKFIN_GPTIMERS 8
+# else
+#  define MAX_BLACKFIN_GPTIMERS 11
+#  define TIMER8_GROUP_REG      TIMER_ENABLE1
+# endif
+# define TIMER0_GROUP_REG       TIMER_ENABLE0
+#endif
+/*
+ * BF561: 12 timers:
+ */
+#if defined(CONFIG_BF561)
+# define MAX_BLACKFIN_GPTIMERS 12
+# define TIMER0_GROUP_REG      TMRS8_ENABLE
+# define TIMER8_GROUP_REG      TMRS4_ENABLE
+#endif
+/*
+ * All others: 3 timers:
+ */
+#if !defined(MAX_BLACKFIN_GPTIMERS)
+# define MAX_BLACKFIN_GPTIMERS 3
+# define TIMER0_GROUP_REG      TIMER_ENABLE
+#endif
+
+#define BLACKFIN_GPTIMER_IDMASK ((1UL << MAX_BLACKFIN_GPTIMERS) - 1)
+#define BFIN_TIMER_OCTET(x) ((x) >> 3)
+
+/* used in masks for timer_enable() and timer_disable() */
+#define TIMER0bit  0x0001  /*  0001b */
+#define TIMER1bit  0x0002  /*  0010b */
+#define TIMER2bit  0x0004  /*  0100b */
+#define TIMER3bit  0x0008
+#define TIMER4bit  0x0010
+#define TIMER5bit  0x0020
+#define TIMER6bit  0x0040
+#define TIMER7bit  0x0080
+#define TIMER8bit  0x0100
+#define TIMER9bit  0x0200
+#define TIMER10bit 0x0400
+#define TIMER11bit 0x0800
+
+#define TIMER0_id   0
+#define TIMER1_id   1
+#define TIMER2_id   2
+#define TIMER3_id   3
+#define TIMER4_id   4
+#define TIMER5_id   5
+#define TIMER6_id   6
+#define TIMER7_id   7
+#define TIMER8_id   8
+#define TIMER9_id   9
+#define TIMER10_id 10
+#define TIMER11_id 11
+
+/* associated timers for ppi framesync: */
+
+#if defined(CONFIG_BF561)
+# define FS0_1_TIMER_ID   TIMER8_id
+# define FS0_2_TIMER_ID   TIMER9_id
+# define FS1_1_TIMER_ID   TIMER10_id
+# define FS1_2_TIMER_ID   TIMER11_id
+# define FS0_1_TIMER_BIT  TIMER8bit
+# define FS0_2_TIMER_BIT  TIMER9bit
+# define FS1_1_TIMER_BIT  TIMER10bit
+# define FS1_2_TIMER_BIT  TIMER11bit
+# undef FS1_TIMER_ID
+# undef FS2_TIMER_ID
+# undef FS1_TIMER_BIT
+# undef FS2_TIMER_BIT
+#else
+# define FS1_TIMER_ID  TIMER0_id
+# define FS2_TIMER_ID  TIMER1_id
+# define FS1_TIMER_BIT TIMER0bit
+# define FS2_TIMER_BIT TIMER1bit
+#endif
+
+/*
+ * Timer Configuration Register Bits
+ */
+#define TIMER_ERR           0xC000
+#define TIMER_ERR_OVFL      0x4000
+#define TIMER_ERR_PROG_PER  0x8000
+#define TIMER_ERR_PROG_PW   0xC000
+#define TIMER_EMU_RUN       0x0200
+#define	TIMER_TOGGLE_HI     0x0100
+#define	TIMER_CLK_SEL       0x0080
+#define TIMER_OUT_DIS       0x0040
+#define TIMER_TIN_SEL       0x0020
+#define TIMER_IRQ_ENA       0x0010
+#define TIMER_PERIOD_CNT    0x0008
+#define TIMER_PULSE_HI      0x0004
+#define TIMER_MODE          0x0003
+#define TIMER_MODE_PWM      0x0001
+#define TIMER_MODE_WDTH     0x0002
+#define TIMER_MODE_EXT_CLK  0x0003
+
+/*
+ * Timer Status Register Bits
+ */
+#define TIMER_STATUS_TIMIL0  0x0001
+#define TIMER_STATUS_TIMIL1  0x0002
+#define TIMER_STATUS_TIMIL2  0x0004
+#define TIMER_STATUS_TIMIL3  0x00000008
+#define TIMER_STATUS_TIMIL4  0x00010000
+#define TIMER_STATUS_TIMIL5  0x00020000
+#define TIMER_STATUS_TIMIL6  0x00040000
+#define TIMER_STATUS_TIMIL7  0x00080000
+#define TIMER_STATUS_TIMIL8  0x0001
+#define TIMER_STATUS_TIMIL9  0x0002
+#define TIMER_STATUS_TIMIL10 0x0004
+#define TIMER_STATUS_TIMIL11 0x0008
+
+#define TIMER_STATUS_TOVF0   0x0010	/* timer 0 overflow error */
+#define TIMER_STATUS_TOVF1   0x0020
+#define TIMER_STATUS_TOVF2   0x0040
+#define TIMER_STATUS_TOVF3   0x00000080
+#define TIMER_STATUS_TOVF4   0x00100000
+#define TIMER_STATUS_TOVF5   0x00200000
+#define TIMER_STATUS_TOVF6   0x00400000
+#define TIMER_STATUS_TOVF7   0x00800000
+#define TIMER_STATUS_TOVF8   0x0010
+#define TIMER_STATUS_TOVF9   0x0020
+#define TIMER_STATUS_TOVF10  0x0040
+#define TIMER_STATUS_TOVF11  0x0080
+
+/*
+ * Timer Slave Enable Status : write 1 to clear
+ */
+#define TIMER_STATUS_TRUN0  0x1000
+#define TIMER_STATUS_TRUN1  0x2000
+#define TIMER_STATUS_TRUN2  0x4000
+#define TIMER_STATUS_TRUN3  0x00008000
+#define TIMER_STATUS_TRUN4  0x10000000
+#define TIMER_STATUS_TRUN5  0x20000000
+#define TIMER_STATUS_TRUN6  0x40000000
+#define TIMER_STATUS_TRUN7  0x80000000
+#define TIMER_STATUS_TRUN   0xF000F000
+#define TIMER_STATUS_TRUN8  0x1000
+#define TIMER_STATUS_TRUN9  0x2000
+#define TIMER_STATUS_TRUN10 0x4000
+#define TIMER_STATUS_TRUN11 0x8000
+
+/* The actual gptimer API */
+
+void     set_gptimer_pwidth    (int timer_id, uint32_t width);
+uint32_t get_gptimer_pwidth    (int timer_id);
+void     set_gptimer_period    (int timer_id, uint32_t period);
+uint32_t get_gptimer_period    (int timer_id);
+uint32_t get_gptimer_count     (int timer_id);
+uint16_t get_gptimer_intr      (int timer_id);
+void     clear_gptimer_intr    (int timer_id);
+uint16_t get_gptimer_over      (int timer_id);
+void     clear_gptimer_over    (int timer_id);
+void     set_gptimer_config    (int timer_id, uint16_t config);
+uint16_t get_gptimer_config    (int timer_id);
+void     set_gptimer_pulse_hi  (int timer_id);
+void     clear_gptimer_pulse_hi(int timer_id);
+void     enable_gptimers       (uint16_t mask);
+void     disable_gptimers      (uint16_t mask);
+uint16_t get_enabled_gptimers  (void);
+uint32_t get_gptimer_status    (int group);
+void     set_gptimer_status    (int group, uint32_t value);
+
+#endif
diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
new file mode 100644
index 00000000000..b6b19f1b9da
--- /dev/null
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -0,0 +1,45 @@
+#ifndef __BFIN_HARDIRQ_H
+#define __BFIN_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int __syscall_count;
+	struct task_struct *__ksoftirqd_task;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+/*
+ * We put the hardirq and softirq counter into the preemption
+ * counter. The bitmask has the following meaning:
+ *
+ * - bits 0-7 are the preemption count (max preemption depth: 256)
+ * - bits 8-15 are the softirq count (max # of softirqs: 256)
+ * - bits 16-23 are the hardirq count (max # of hardirqs: 256)
+ *
+ * - ( bit 26 is the PREEMPT_ACTIVE flag. )
+ *
+ * PREEMPT_MASK: 0x000000ff
+ * HARDIRQ_MASK: 0x0000ff00
+ * SOFTIRQ_MASK: 0x00ff0000
+ */
+
+#if NR_IRQS > 256
+#define HARDIRQ_BITS	9
+#else
+#define HARDIRQ_BITS	8
+#endif
+
+#ifdef NR_IRQS
+# if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+# endif
+#endif
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
+
+#endif
diff --git a/arch/blackfin/include/asm/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h
new file mode 100644
index 00000000000..5b51eaec012
--- /dev/null
+++ b/arch/blackfin/include/asm/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_BFIN_HW_IRQ_H
+#define __ASM_BFIN_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
new file mode 100644
index 00000000000..cbbf7ffdbbf
--- /dev/null
+++ b/arch/blackfin/include/asm/io.h
@@ -0,0 +1,212 @@
+#ifndef _BFIN_IO_H
+#define _BFIN_IO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+#include <linux/compiler.h>
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the bfin architecture, we just read/write the
+ * memory location directly.
+ */
+#ifndef __ASSEMBLY__
+
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+	unsigned int val;
+	int tmp;
+
+	__asm__ __volatile__ ("cli %1;\n\t"
+			"NOP; NOP; SSYNC;\n\t"
+			"%0 = b [%2] (z);\n\t"
+			"sti %1;\n\t"
+			: "=d"(val), "=d"(tmp): "a"(addr)
+			);
+
+	return (unsigned char) val;
+}
+
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+	unsigned int val;
+	int tmp;
+
+	__asm__ __volatile__ ("cli %1;\n\t"
+			"NOP; NOP; SSYNC;\n\t"
+			"%0 = w [%2] (z);\n\t"
+			"sti %1;\n\t"
+		      	: "=d"(val), "=d"(tmp): "a"(addr)
+			);
+
+	return (unsigned short) val;
+}
+
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+	unsigned int val;
+	int tmp;
+
+	__asm__ __volatile__ ("cli %1;\n\t"
+			"NOP; NOP; SSYNC;\n\t"
+			"%0 = [%2];\n\t"
+			"sti %1;\n\t"
+		      	: "=d"(val), "=d"(tmp): "a"(addr)
+			);
+	return val;
+}
+
+#endif /*  __ASSEMBLY__ */
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+#define inb(addr)    readb(addr)
+#define inw(addr)    readw(addr)
+#define inl(addr)    readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define ioread8_rep(a,d,c)	insb(a,d,c)
+#define ioread16_rep(a,d,c)	insw(a,d,c)
+#define ioread32_rep(a,d,c)	insl(a,d,c)
+#define iowrite8_rep(a,s,c)	outsb(a,s,c)
+#define iowrite16_rep(a,s,c)	outsw(a,s,c)
+#define iowrite32_rep(a,s,c)	outsl(a,s,c)
+
+#define ioread8(X)			readb(X)
+#define ioread16(X)			readw(X)
+#define ioread32(X)			readl(X)
+#define iowrite8(val,X)			writeb(val,X)
+#define iowrite16(val,X)		writew(val,X)
+#define iowrite32(val,X)		writel(val,X)
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_NOCACHE_SER		1
+
+#ifndef __ASSEMBLY__
+
+extern void outsb(unsigned long port, const void *addr, unsigned long count);
+extern void outsw(unsigned long port, const void *addr, unsigned long count);
+extern void outsw_8(unsigned long port, const void *addr, unsigned long count);
+extern void outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern void insb(unsigned long port, void *addr, unsigned long count);
+extern void insw(unsigned long port, void *addr, unsigned long count);
+extern void insw_8(unsigned long port, void *addr, unsigned long count);
+extern void insl(unsigned long port, void *addr, unsigned long count);
+extern void insl_16(unsigned long port, void *addr, unsigned long count);
+
+extern void dma_outsb(unsigned long port, const void *addr, unsigned short count);
+extern void dma_outsw(unsigned long port, const void *addr, unsigned short count);
+extern void dma_outsl(unsigned long port, const void *addr, unsigned short count);
+
+extern void dma_insb(unsigned long port, void *addr, unsigned short count);
+extern void dma_insw(unsigned long port, void *addr, unsigned short count);
+extern void dma_insl(unsigned long port, void *addr, unsigned short count);
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+static inline void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
+				int cacheflag)
+{
+	return (void __iomem *)physaddr;
+}
+
+/*
+ * Unmap a ioremap()ed region again
+ */
+static inline void iounmap(void *addr)
+{
+}
+
+/*
+ * __iounmap unmaps nearly everything, so be careful
+ * it doesn't free currently pointer/page tables anymore but it
+ * wans't used anyway and might be added later.
+ */
+static inline void __iounmap(void *addr, unsigned long size)
+{
+}
+
+/*
+ * Set new cache mode for some kernel address space.
+ * The caller must push data for that range itself, if such data may already
+ * be in the cache.
+ */
+static inline void kernel_set_cachemode(void *addr, unsigned long size,
+					int cmode)
+{
+}
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void __iomem *ioremap_nocache(unsigned long physaddr,
+					    unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+extern void blkfin_inv_cache_all(void);
+
+#endif
+
+#define	ioport_map(port, nr)		((void __iomem*)(port))
+#define	ioport_unmap(addr)
+
+/* Pages to physical address... */
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
+
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _BFIN_IO_H */
diff --git a/arch/blackfin/include/asm/ioctl.h b/arch/blackfin/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/blackfin/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/blackfin/include/asm/ioctls.h b/arch/blackfin/include/asm/ioctls.h
new file mode 100644
index 00000000000..895e3173165
--- /dev/null
+++ b/arch/blackfin/include/asm/ioctls.h
@@ -0,0 +1,87 @@
+#ifndef __ARCH_BFIN_IOCTLS_H__
+#define __ARCH_BFIN_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT	0x5426	/* For debugging only */
+#define TIOCSBRK	0x5427	/* BSD compatibility */
+#define TIOCCBRK	0x5428	/* BSD compatibility */
+#define TIOCGSID	0x5429	/* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+/* Get Pty Number (of pty-mux device) */
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
+#define TIOCSPTLCK	_IOW('T', 0x31, int)	/* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450	/* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458	/* For debugging only */
+#define TIOCSERGETLSR   0x5459	/* Get line status register */
+#define TIOCSERGETMULTI 0x545A	/* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B	/* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif				/* __ARCH_BFIN_IOCTLS_H__ */
diff --git a/arch/blackfin/include/asm/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..8f0899cdf4d
--- /dev/null
+++ b/arch/blackfin/include/asm/ipcbuf.h
@@ -0,0 +1,30 @@
+/* Changes origined from m68k version.    Lineo Inc.  May 2001   */
+
+#ifndef __BFIN_IPCBUF_H__
+#define __BFIN_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+	__kernel_key_t key;
+	__kernel_uid32_t uid;
+	__kernel_gid32_t gid;
+	__kernel_uid32_t cuid;
+	__kernel_gid32_t cgid;
+	__kernel_mode_t mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	unsigned long __unused1;
+	unsigned long __unused2;
+};
+
+#endif				/* __BFIN_IPCBUF_H__ */
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
new file mode 100644
index 00000000000..89f59e18af9
--- /dev/null
+++ b/arch/blackfin/include/asm/irq.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Changed by HuTao Apr18, 2003
+ *
+ * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
+ * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
+ *
+ * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
+ * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
+ * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
+ */
+
+#ifndef _BFIN_IRQ_H_
+#define _BFIN_IRQ_H_
+
+#include <mach/irq.h>
+#include <asm/ptrace.h>
+
+/*******************************************************************************
+ *****   INTRODUCTION ***********
+ *   On the Blackfin, the interrupt structure allows remmapping of the hardware
+ *   levels.
+ * - I'm going to assume that the H/W level is going to stay at the default
+ *   settings. If someone wants to go through and abstart this out, feel free
+ *   to mod the interrupt numbering scheme.
+ * - I'm abstracting the interrupts so that uClinux does not know anything
+ *   about the H/W levels. If you want to change the H/W AND keep the abstracted
+ *   levels that uClinux sees, you should be able to do most of it here.
+ * - I've left the "abstract" numbering sparce in case someone wants to pull the
+ *   interrupts apart (just the TX/RX for the various devices)
+ *******************************************************************************/
+
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
+
+/*
+ * Machine specific interrupt sources.
+ *
+ * Adding an interrupt service routine for a source with this bit
+ * set indicates a special machine specific interrupt source.
+ * The machine specific files define these sources.
+ *
+ * The IRQ_MACHSPEC bit is now gone - the only thing it did was to
+ * introduce unnecessary overhead.
+ *
+ * All interrupt handling is actually machine specific so it is better
+ * to use function pointers, as used by the Sparc port, and select the
+ * interrupt handling functions when initializing the kernel. This way
+ * we save some unnecessary overhead at run-time.
+ *                                                      01/11/97 - Jes
+ */
+
+extern void ack_bad_irq(unsigned int irq);
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+/* count of spurious interrupts */
+/* extern volatile unsigned int num_spurious; */
+
+#ifndef NO_IRQ
+#define NO_IRQ ((unsigned int)(-1))
+#endif
+
+#define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
+
+#endif				/* _BFIN_IRQ_H_ */
diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h
new file mode 100644
index 00000000000..139b5208f9d
--- /dev/null
+++ b/arch/blackfin/include/asm/irq_handler.h
@@ -0,0 +1,33 @@
+#ifndef _IRQ_HANDLER_H
+#define _IRQ_HANDLER_H
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+
+/* BASE LEVEL interrupt handler routines */
+asmlinkage void evt_exception(void);
+asmlinkage void trap(void);
+asmlinkage void evt_ivhw(void);
+asmlinkage void evt_timer(void);
+asmlinkage void evt_nmi(void);
+asmlinkage void evt_evt7(void);
+asmlinkage void evt_evt8(void);
+asmlinkage void evt_evt9(void);
+asmlinkage void evt_evt10(void);
+asmlinkage void evt_evt11(void);
+asmlinkage void evt_evt12(void);
+asmlinkage void evt_evt13(void);
+asmlinkage void evt_soft_int1(void);
+asmlinkage void evt_system_call(void);
+asmlinkage void init_exception_buff(void);
+asmlinkage void trap_c(struct pt_regs *fp);
+asmlinkage void ex_replaceable(void);
+asmlinkage void early_trap(void);
+
+extern void *ex_table[];
+extern void return_from_exception(void);
+
+extern int bfin_request_exception(unsigned int exception, void (*handler)(void));
+extern int bfin_free_exception(unsigned int exception, void (*handler)(void));
+
+#endif
diff --git a/arch/blackfin/include/asm/irq_regs.h b/arch/blackfin/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/blackfin/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/blackfin/include/asm/kdebug.h b/arch/blackfin/include/asm/kdebug.h
new file mode 100644
index 00000000000..6ece1b03766
--- /dev/null
+++ b/arch/blackfin/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h
new file mode 100644
index 00000000000..0f73847fd6b
--- /dev/null
+++ b/arch/blackfin/include/asm/kgdb.h
@@ -0,0 +1,184 @@
+/*
+ * File:         include/asm-blackfin/kgdb.h
+ * Based on:
+ * Author:       Sonic Zhang
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:          $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
+ *
+ * Modified:
+ *               Copyright 2005-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __ASM_BLACKFIN_KGDB_H__
+#define __ASM_BLACKFIN_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/* gdb locks */
+#define KGDB_MAX_NO_CPUS 8
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+/* Longer buffer is needed to list all threads */
+#define BUFMAX 2048
+
+/*
+ *  Note that this register image is different from
+ *  the register image that Linux produces at interrupt time.
+ *  
+ *  Linux's register image is defined by struct pt_regs in ptrace.h.
+ */
+enum regnames {
+  /* Core Registers */
+  BFIN_R0 = 0,
+  BFIN_R1,
+  BFIN_R2,
+  BFIN_R3,
+  BFIN_R4,
+  BFIN_R5,
+  BFIN_R6,
+  BFIN_R7,
+  BFIN_P0,
+  BFIN_P1,
+  BFIN_P2,
+  BFIN_P3,
+  BFIN_P4,
+  BFIN_P5,
+  BFIN_SP,
+  BFIN_FP,
+  BFIN_I0,
+  BFIN_I1,
+  BFIN_I2,
+  BFIN_I3,
+  BFIN_M0,
+  BFIN_M1,
+  BFIN_M2,
+  BFIN_M3,
+  BFIN_B0,
+  BFIN_B1,
+  BFIN_B2,
+  BFIN_B3,
+  BFIN_L0,
+  BFIN_L1,
+  BFIN_L2,
+  BFIN_L3,
+  BFIN_A0_DOT_X,
+  BFIN_A0_DOT_W,
+  BFIN_A1_DOT_X,
+  BFIN_A1_DOT_W,
+  BFIN_ASTAT,
+  BFIN_RETS,
+  BFIN_LC0,
+  BFIN_LT0,
+  BFIN_LB0,
+  BFIN_LC1,
+  BFIN_LT1,
+  BFIN_LB1,
+  BFIN_CYCLES,
+  BFIN_CYCLES2,
+  BFIN_USP,
+  BFIN_SEQSTAT,
+  BFIN_SYSCFG,
+  BFIN_RETI,
+  BFIN_RETX,
+  BFIN_RETN,
+  BFIN_RETE,
+  
+  /* Pseudo Registers */
+  BFIN_PC,
+  BFIN_CC,
+  BFIN_EXTRA1,		/* Address of .text section.  */
+  BFIN_EXTRA2,		/* Address of .data section.  */
+  BFIN_EXTRA3,		/* Address of .bss section.  */
+  BFIN_FDPIC_EXEC, 
+  BFIN_FDPIC_INTERP,
+
+  /* MMRs */
+  BFIN_IPEND,
+
+  /* LAST ENTRY SHOULD NOT BE CHANGED.  */
+  BFIN_NUM_REGS		/* The number of all registers.  */
+};
+
+/* Number of bytes of registers.  */
+#define NUMREGBYTES BFIN_NUM_REGS*4
+
+#define BREAKPOINT() asm("   EXCPT 2;");
+#define BREAK_INSTR_SIZE       2
+#define HW_BREAKPOINT_NUM		6
+
+/* Instruction watchpoint address control register bits mask */
+#define WPPWR		0x1
+#define WPIREN01	0x2
+#define WPIRINV01	0x4
+#define WPIAEN0		0x8
+#define WPIAEN1		0x10
+#define WPICNTEN0	0x20
+#define WPICNTEN1	0x40
+#define EMUSW0		0x80
+#define EMUSW1		0x100
+#define WPIREN23	0x200
+#define WPIRINV23	0x400
+#define WPIAEN2		0x800
+#define WPIAEN3		0x1000
+#define WPICNTEN2	0x2000
+#define WPICNTEN3	0x4000
+#define EMUSW2		0x8000
+#define EMUSW3		0x10000
+#define WPIREN45	0x20000
+#define WPIRINV45	0x40000
+#define WPIAEN4		0x80000
+#define WPIAEN5		0x100000
+#define WPICNTEN4	0x200000
+#define WPICNTEN5	0x400000
+#define EMUSW4		0x800000
+#define EMUSW5		0x1000000
+#define WPAND		0x2000000
+
+/* Data watchpoint address control register bits mask */
+#define WPDREN01	0x1
+#define WPDRINV01	0x2
+#define WPDAEN0		0x4
+#define WPDAEN1		0x8
+#define WPDCNTEN0	0x10
+#define WPDCNTEN1	0x20
+#define WPDSRC0		0xc0
+#define WPDACC0		0x300
+#define WPDSRC1		0xc00
+#define WPDACC1		0x3000
+
+/* Watchpoint status register bits mask */
+#define STATIA0		0x1
+#define STATIA1		0x2
+#define STATIA2		0x4
+#define STATIA3		0x8
+#define STATIA4		0x10
+#define STATIA5		0x20
+#define STATDA0		0x40
+#define STATDA1		0x80
+
+extern void kgdb_print(const char *fmt, ...);
+extern void init_kgdb_uart(void);
+
+#endif
diff --git a/arch/blackfin/include/asm/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h
new file mode 100644
index 00000000000..e215f710497
--- /dev/null
+++ b/arch/blackfin/include/asm/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/blackfin/include/asm/l1layout.h b/arch/blackfin/include/asm/l1layout.h
new file mode 100644
index 00000000000..c13ded77782
--- /dev/null
+++ b/arch/blackfin/include/asm/l1layout.h
@@ -0,0 +1,31 @@
+/*
+ * l1layout.h
+ * Defines a layout of L1 scratchpad memory that userspace can rely on.
+ */
+
+#ifndef _L1LAYOUT_H_
+#define _L1LAYOUT_H_
+
+#include <asm/blackfin.h>
+
+#ifndef __ASSEMBLY__
+
+/* Data that is "mapped" into the process VM at the start of the L1 scratch
+   memory, so that each process can access it at a fixed address.  Used for
+   stack checking.  */
+struct l1_scratch_task_info
+{
+	/* Points to the start of the stack.  */
+	void *stack_start;
+	/* Not updated by the kernel; a user process can modify this to
+	   keep track of the lowest address of the stack pointer during its
+	   runtime.  */
+	void *lowest_sp;
+};
+
+/* A pointer to the structure in memory.  */
+#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)L1_SCRATCH_START)
+
+#endif
+
+#endif
diff --git a/arch/blackfin/include/asm/linkage.h b/arch/blackfin/include/asm/linkage.h
new file mode 100644
index 00000000000..5a822bb790f
--- /dev/null
+++ b/arch/blackfin/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
diff --git a/arch/blackfin/include/asm/local.h b/arch/blackfin/include/asm/local.h
new file mode 100644
index 00000000000..75afffbc642
--- /dev/null
+++ b/arch/blackfin/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef __BLACKFIN_LOCAL_H
+#define __BLACKFIN_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif				/* __BLACKFIN_LOCAL_H */
diff --git a/arch/blackfin/include/asm/mem_map.h b/arch/blackfin/include/asm/mem_map.h
new file mode 100644
index 00000000000..88d04a70770
--- /dev/null
+++ b/arch/blackfin/include/asm/mem_map.h
@@ -0,0 +1,12 @@
+/*
+ * mem_map.h
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _MEM_MAP_H_
+#define _MEM_MAP_H_
+
+#include <mach/mem_map.h>
+
+#endif				/* _MEM_MAP_H_ */
diff --git a/arch/blackfin/include/asm/mman.h b/arch/blackfin/include/asm/mman.h
new file mode 100644
index 00000000000..b58f5ad3f02
--- /dev/null
+++ b/arch/blackfin/include/asm/mman.h
@@ -0,0 +1,43 @@
+#ifndef __BFIN_MMAN_H__
+#define __BFIN_MMAN_H__
+
+#define PROT_READ	0x1	/* page can be read */
+#define PROT_WRITE	0x2	/* page can be written */
+#define PROT_EXEC	0x4	/* page can be executed */
+#define PROT_SEM	0x8	/* page may be used for atomic ops */
+#define PROT_NONE	0x0	/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01	/* Share changes */
+#define MAP_PRIVATE	0x02	/* Changes are private */
+#define MAP_TYPE	0x0f	/* Mask for type of mapping */
+#define MAP_FIXED	0x10	/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20	/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100	/* stack-like segment */
+#define MAP_DENYWRITE	0x0800	/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000	/* mark it as an executable */
+#define MAP_LOCKED	0x2000	/* pages are locked */
+#define MAP_NORESERVE	0x4000	/* don't check for reservations */
+#define MAP_POPULATE	0x8000	/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000	/* do not block on IO */
+
+#define MS_ASYNC	1	/* sync memory asynchronously */
+#define MS_INVALIDATE	2	/* invalidate the caches */
+#define MS_SYNC		4	/* synchronous memory sync */
+
+#define MCL_CURRENT	1	/* lock all current mappings */
+#define MCL_FUTURE	2	/* lock all future mappings */
+
+#define MADV_NORMAL	0x0	/* default page-in behavior */
+#define MADV_RANDOM	0x1	/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2	/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3	/* pre-fault pages */
+#define MADV_DONTNEED	0x4	/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif				/* __BFIN_MMAN_H__ */
diff --git a/arch/blackfin/include/asm/mmu.h b/arch/blackfin/include/asm/mmu.h
new file mode 100644
index 00000000000..757e43906ed
--- /dev/null
+++ b/arch/blackfin/include/asm/mmu.h
@@ -0,0 +1,32 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+struct sram_list_struct {
+	struct sram_list_struct *next;
+	void *addr;
+	size_t length;
+};
+
+typedef struct {
+	struct vm_list_struct *vmlist;
+	unsigned long end_brk;
+	unsigned long stack_start;
+
+	/* Points to the location in SDRAM where the L1 stack is normally
+	   saved, or NULL if the stack is always in SDRAM.  */
+	void *l1_stack_save;
+
+	struct sram_list_struct *sram_list;
+
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	unsigned long	exec_fdpic_loadmap;
+	unsigned long	interp_fdpic_loadmap;
+#endif
+#ifdef CONFIG_MPU
+	unsigned long *page_rwx_mask;
+#endif
+} mm_context_t;
+
+#endif
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
new file mode 100644
index 00000000000..8529552a981
--- /dev/null
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -0,0 +1,183 @@
+/*
+ * File:         include/asm-blackfin/mmu_context.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __BLACKFIN_MMU_CONTEXT_H__
+#define __BLACKFIN_MMU_CONTEXT_H__
+
+#include <linux/gfp.h>
+#include <linux/sched.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/cplbinit.h>
+
+extern void *current_l1_stack_save;
+extern int nr_l1stack_tasks;
+extern void *l1_stack_base;
+extern unsigned long l1_stack_len;
+
+extern int l1sram_free(const void*);
+extern void *l1sram_alloc_max(void*);
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/* Called when creating a new context during fork() or execve().  */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+#ifdef CONFIG_MPU
+	unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order);
+	mm->context.page_rwx_mask = (unsigned long *)p;
+	memset(mm->context.page_rwx_mask, 0,
+	       page_mask_nelts * 3 * sizeof(long));
+#endif
+	return 0;
+}
+
+static inline void free_l1stack(void)
+{
+	nr_l1stack_tasks--;
+	if (nr_l1stack_tasks == 0)
+		l1sram_free(l1_stack_base);
+}
+static inline void destroy_context(struct mm_struct *mm)
+{
+	struct sram_list_struct *tmp;
+
+	if (current_l1_stack_save == mm->context.l1_stack_save)
+		current_l1_stack_save = NULL;
+	if (mm->context.l1_stack_save)
+		free_l1stack();
+
+	while ((tmp = mm->context.sram_list)) {
+		mm->context.sram_list = tmp->next;
+		sram_free(tmp->addr);
+		kfree(tmp);
+	}
+#ifdef CONFIG_MPU
+	if (current_rwx_mask == mm->context.page_rwx_mask)
+		current_rwx_mask = NULL;
+	free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order);
+#endif
+}
+
+static inline unsigned long
+alloc_l1stack(unsigned long length, unsigned long *stack_base)
+{
+	if (nr_l1stack_tasks == 0) {
+		l1_stack_base = l1sram_alloc_max(&l1_stack_len);
+		if (!l1_stack_base)
+			return 0;
+	}
+
+	if (l1_stack_len < length) {
+		if (nr_l1stack_tasks == 0)
+			l1sram_free(l1_stack_base);
+		return 0;
+	}
+	*stack_base = (unsigned long)l1_stack_base;
+	nr_l1stack_tasks++;
+	return l1_stack_len;
+}
+
+static inline int
+activate_l1stack(struct mm_struct *mm, unsigned long sp_base)
+{
+	if (current_l1_stack_save)
+		memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
+	mm->context.l1_stack_save = current_l1_stack_save = (void*)sp_base;
+	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+	return 1;
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+#define activate_mm(prev, next) switch_mm(prev, next, NULL)
+
+static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+			     struct task_struct *tsk)
+{
+	if (prev_mm == next_mm)
+		return;
+#ifdef CONFIG_MPU
+	if (prev_mm->context.page_rwx_mask == current_rwx_mask) {
+		flush_switched_cplbs();
+		set_mask_dcplbs(next_mm->context.page_rwx_mask);
+	}
+#endif
+
+	/* L1 stack switching.  */
+	if (!next_mm->context.l1_stack_save)
+		return;
+	if (next_mm->context.l1_stack_save == current_l1_stack_save)
+		return;
+	if (current_l1_stack_save) {
+		memcpy(current_l1_stack_save, l1_stack_base, l1_stack_len);
+	}
+	current_l1_stack_save = next_mm->context.l1_stack_save;
+	memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len);
+}
+
+#ifdef CONFIG_MPU
+static inline void protect_page(struct mm_struct *mm, unsigned long addr,
+				unsigned long flags)
+{
+	unsigned long *mask = mm->context.page_rwx_mask;
+	unsigned long page = addr >> 12;
+	unsigned long idx = page >> 5;
+	unsigned long bit = 1 << (page & 31);
+
+	if (flags & VM_MAYREAD)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+	mask += page_mask_nelts;
+	if (flags & VM_MAYWRITE)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+	mask += page_mask_nelts;
+	if (flags & VM_MAYEXEC)
+		mask[idx] |= bit;
+	else
+		mask[idx] &= ~bit;
+}
+
+static inline void update_protections(struct mm_struct *mm)
+{
+	if (mm->context.page_rwx_mask == current_rwx_mask) {
+		flush_switched_cplbs();
+		set_mask_dcplbs(mm->context.page_rwx_mask);
+	}
+}
+#endif
+
+#endif
diff --git a/arch/blackfin/include/asm/module.h b/arch/blackfin/include/asm/module.h
new file mode 100644
index 00000000000..e3128df139d
--- /dev/null
+++ b/arch/blackfin/include/asm/module.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_BFIN_MODULE_H
+#define _ASM_BFIN_MODULE_H
+
+#define MODULE_SYMBOL_PREFIX "_"
+
+#define Elf_Shdr        Elf32_Shdr
+#define Elf_Sym         Elf32_Sym
+#define Elf_Ehdr        Elf32_Ehdr
+
+struct mod_arch_specific {
+	Elf_Shdr	*text_l1;
+	Elf_Shdr	*data_a_l1;
+	Elf_Shdr	*bss_a_l1;
+	Elf_Shdr	*data_b_l1;
+	Elf_Shdr	*bss_b_l1;
+	Elf_Shdr	*text_l2;
+	Elf_Shdr	*data_l2;
+	Elf_Shdr	*bss_l2;
+};
+#endif				/* _ASM_BFIN_MODULE_H */
diff --git a/arch/blackfin/include/asm/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h
new file mode 100644
index 00000000000..6fcbe8cd801
--- /dev/null
+++ b/arch/blackfin/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _BFIN_MSGBUF_H
+#define _BFIN_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for bfin architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long __unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long __unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long __unused3;
+	unsigned long msg_cbytes;	/* current number of bytes on queue */
+	unsigned long msg_qnum;	/* number of messages in queue */
+	unsigned long msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long __unused4;
+	unsigned long __unused5;
+};
+
+#endif				/* _BFIN_MSGBUF_H */
diff --git a/arch/blackfin/include/asm/mutex.h b/arch/blackfin/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/blackfin/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
new file mode 100644
index 00000000000..afbaafa793f
--- /dev/null
+++ b/arch/blackfin/include/asm/nand.h
@@ -0,0 +1,47 @@
+/* linux/include/asm-blackfin/nand.h
+ *
+ * Copyright (c) 2007 Analog Devices, Inc.
+ *	Bryan Wu <bryan.wu@analog.com>
+ *
+ * BF5XX - NAND flash controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* struct bf5xx_nand_platform
+ *
+ * define a interface between platfrom board specific code and
+ * bf54x NFC driver.
+ *
+ * nr_partitions = number of partitions pointed to be partitoons (or zero)
+ * partitions	 = mtd partition list
+ */
+
+#define NFC_PG_SIZE_256		0
+#define NFC_PG_SIZE_512		1
+#define NFC_PG_SIZE_OFFSET	9
+
+#define NFC_NWIDTH_8		0
+#define NFC_NWIDTH_16		1
+#define NFC_NWIDTH_OFFSET	8
+
+#define NFC_RDDLY_OFFSET	4
+#define NFC_WRDLY_OFFSET	0
+
+#define NFC_STAT_NBUSY		1
+
+struct bf5xx_nand_platform {
+	/* NAND chip information */
+	unsigned short		page_size;
+	unsigned short		data_width;
+
+	/* RD/WR strobe delay timing information, all times in SCLK cycles */
+	unsigned short		rd_dly;
+	unsigned short		wr_dly;
+
+	/* NAND MTD partition information */
+	int                     nr_partitions;
+	struct mtd_partition    *partitions;
+};
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
new file mode 100644
index 00000000000..344f6a8c1f2
--- /dev/null
+++ b/arch/blackfin/include/asm/page.h
@@ -0,0 +1,88 @@
+#ifndef _BLACKFIN_PAGE_H
+#define _BLACKFIN_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	12
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE	(1 << PAGE_SHIFT)
+#else
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr,pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr,pg)	copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct {
+	unsigned long pte;
+} pte_t;
+typedef struct {
+	unsigned long pmd[16];
+} pmd_t;
+typedef struct {
+	unsigned long pgd;
+} pgd_t;
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif				/* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+#include <asm/io.h>
+
+#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
+#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
+
+#define MAP_NR(addr)		(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+#define VALID_PAGE(page)	((page - mem_map) < max_mapnr)
+
+#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
+
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
+
+#include <asm-generic/page.h>
+
+#endif				/* __ASSEMBLY__ */
+
+#endif				/* _BLACKFIN_PAGE_H */
diff --git a/arch/blackfin/include/asm/page_offset.h b/arch/blackfin/include/asm/page_offset.h
new file mode 100644
index 00000000000..cbaff24b4b2
--- /dev/null
+++ b/arch/blackfin/include/asm/page_offset.h
@@ -0,0 +1,6 @@
+
+/* This handles the memory map.. */
+
+#ifdef CONFIG_BLACKFIN
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
diff --git a/arch/blackfin/include/asm/param.h b/arch/blackfin/include/asm/param.h
new file mode 100644
index 00000000000..41564a6347f
--- /dev/null
+++ b/arch/blackfin/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _BLACKFIN_PARAM_H
+#define _BLACKFIN_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ 		CONFIG_HZ
+#define	USER_HZ		100
+#define	CLOCKS_PER_SEC	(USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif				/* _BLACKFIN_PARAM_H */
diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h
new file mode 100644
index 00000000000..61277358c86
--- /dev/null
+++ b/arch/blackfin/include/asm/pci.h
@@ -0,0 +1,148 @@
+/* Changed from asm-m68k version, Lineo Inc. 	May 2001	*/
+
+#ifndef _ASM_BFIN_PCI_H
+#define _ASM_BFIN_PCI_H
+
+#include <asm/scatterlist.h>
+
+/*
+ *
+ * Written by Wout Klaren.
+ */
+
+/* Added by Chang Junxiao */
+#define PCIBIOS_MIN_IO 0x00001000
+#define PCIBIOS_MIN_MEM 0x10000000
+
+#define PCI_DMA_BUS_IS_PHYS       (1)
+struct pci_ops;
+
+/*
+ * Structure with hardware dependent information and functions of the
+ * PCI bus.
+ */
+struct pci_bus_info {
+
+	/*
+	 * Resources of the PCI bus.
+	 */
+	struct resource mem_space;
+	struct resource io_space;
+
+	/*
+	 * System dependent functions.
+	 */
+	struct pci_ops *bfin_pci_ops;
+	void (*fixup) (int pci_modify);
+	void (*conf_device) (unsigned char bus, unsigned char device_fn);
+};
+
+#define pcibios_assign_all_busses()	0
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+
+	/* No special bus mastering setup handling */
+}
+static inline void pcibios_penalize_isa_irq(int irq)
+{
+
+	/* We don't do dynamic PCI IRQ allocation */
+}
+static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
+					size_t size, int direction)
+{
+	if (direction == PCI_DMA_NONE)
+		BUG();
+
+	 /* return virt_to_bus(ptr); */
+	return (dma_addr_t) ptr;
+}
+
+/* Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+				    size_t size, int direction)
+{
+	if (direction == PCI_DMA_NONE)
+		BUG();
+
+	/* Nothing to do */
+}
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+			     int nents, int direction)
+{
+	if (direction == PCI_DMA_NONE)
+		BUG();
+	return nents;
+}
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+				int nents, int direction)
+{
+	if (direction == PCI_DMA_NONE)
+		BUG();
+
+	/* Nothing to do */
+}
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, the
+ * device again owns the buffer.
+ */
+static inline void pci_dma_sync_single(struct pci_dev *hwdev,
+				       dma_addr_t dma_handle, size_t size,
+				       int direction)
+{
+	if (direction == PCI_DMA_NONE)
+		BUG();
+
+	/* Nothing to do */
+}
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list,
+ * same rules and usage.
+ */
+static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
+				   struct scatterlist *sg, int nelems,
+				   int direction)
+{
+	if (direction == PCI_DMA_NONE)
+		BUG();
+
+	/* Nothing to do */
+}
+
+#endif				/* _ASM_BFIN_PCI_H */
diff --git a/arch/blackfin/include/asm/percpu.h b/arch/blackfin/include/asm/percpu.h
new file mode 100644
index 00000000000..78dd61f6b39
--- /dev/null
+++ b/arch/blackfin/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_BLACKFIN_PERCPU__
+#define __ARCH_BLACKFIN_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif				/* __ARCH_BLACKFIN_PERCPU__ */
diff --git a/arch/blackfin/include/asm/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h
new file mode 100644
index 00000000000..c686e0542fd
--- /dev/null
+++ b/arch/blackfin/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef _BLACKFIN_PGALLOC_H
+#define _BLACKFIN_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif				/* _BLACKFIN_PGALLOC_H */
diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h
new file mode 100644
index 00000000000..f11684e4ade
--- /dev/null
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -0,0 +1,96 @@
+#ifndef _BLACKFIN_PGTABLE_H
+#define _BLACKFIN_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <asm/page.h>
+#include <asm/def_LPBlackfin.h>
+
+typedef pte_t *pte_addr_t;
+/*
+* Trivial page table functions.
+*/
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+
+#define pmd_offset(a, b)	((void *)0)
+#define pmd_none(x)		(!pmd_val(x))
+#define pmd_present(x)		(pmd_val(x))
+#define pmd_clear(xp)		do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x)		(pmd_val(x) & ~PAGE_MASK)
+
+#define kern_addr_valid(addr) (1)
+
+#define PAGE_NONE		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_SHARED		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_COPY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_READONLY		__pgprot(0)	/* these mean nothing to NO_MM */
+#define PAGE_KERNEL		__pgprot(0)	/* these mean nothing to NO_MM */
+
+extern void paging_init(void);
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte)
+{
+	return 0;
+}
+
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+/*
+ * Page assess control based on Blackfin CPLB management
+ */
+#define _PAGE_RD	(CPLB_USER_RD)
+#define _PAGE_WR	(CPLB_USER_WR)
+#define _PAGE_USER	(CPLB_USER_RD | CPLB_USER_WR)
+#define _PAGE_ACCESSED	CPLB_ALL_ACCESS
+#define _PAGE_DIRTY	(CPLB_DIRTY)
+
+#define PTE_BIT_FUNC(fn, op) \
+	static inline pte_t pte_##fn(pte_t _pte) { _pte.pte op; return _pte; }
+
+PTE_BIT_FUNC(rdprotect, &= ~_PAGE_RD);
+PTE_BIT_FUNC(mkread, |= _PAGE_RD);
+PTE_BIT_FUNC(wrprotect, &= ~_PAGE_WR);
+PTE_BIT_FUNC(mkwrite, |= _PAGE_WR);
+PTE_BIT_FUNC(exprotect, &= ~_PAGE_USER);
+PTE_BIT_FUNC(mkexec, |= _PAGE_USER);
+PTE_BIT_FUNC(mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED);
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+extern unsigned int kobjsize(const void *objp);
+
+#define swapper_pg_dir ((pgd_t *) 0)
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+#define io_remap_pfn_range      remap_pfn_range
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#include <asm-generic/pgtable.h>
+
+#endif				/* _BLACKFIN_PGTABLE_H */
diff --git a/arch/blackfin/include/asm/poll.h b/arch/blackfin/include/asm/poll.h
new file mode 100644
index 00000000000..94cc2636e0e
--- /dev/null
+++ b/arch/blackfin/include/asm/poll.h
@@ -0,0 +1,24 @@
+#ifndef __BFIN_POLL_H
+#define __BFIN_POLL_H
+
+#define POLLIN		  1
+#define POLLPRI		  2
+#define POLLOUT		  4
+#define POLLERR		  8
+#define POLLHUP		 16
+#define POLLNVAL	 32
+#define POLLRDNORM	 64
+#define POLLWRNORM	POLLOUT
+#define POLLRDBAND	128
+#define POLLWRBAND	256
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+#define POLLRDHUP       0x2000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif				/* __BFIN_POLL_H */
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
new file mode 100644
index 00000000000..88eb5c07cc2
--- /dev/null
+++ b/arch/blackfin/include/asm/portmux.h
@@ -0,0 +1,1188 @@
+/*
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _PORTMUX_H_
+#define _PORTMUX_H_
+
+#define P_IDENT(x)	((x) & 0x1FF)
+#define P_FUNCT(x)	(((x) & 0x3) << 9)
+#define P_FUNCT2MUX(x)	(((x) >> 9) & 0x3)
+#define P_DEFINED	0x8000
+#define P_UNDEF		0x4000
+#define P_MAYSHARE	0x2000
+#define P_DONTCARE	0x1000
+
+
+int peripheral_request(unsigned short per, const char *label);
+void peripheral_free(unsigned short per);
+int peripheral_request_list(const unsigned short per[], const char *label);
+void peripheral_free_list(const unsigned short per[]);
+
+#include <asm/gpio.h>
+#include <mach/portmux.h>
+
+#ifndef P_SPORT2_TFS
+#define P_SPORT2_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DTSEC
+#define P_SPORT2_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DTPRI
+#define P_SPORT2_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT2_TSCLK
+#define P_SPORT2_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT2_RFS
+#define P_SPORT2_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DRSEC
+#define P_SPORT2_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DRPRI
+#define P_SPORT2_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT2_RSCLK
+#define P_SPORT2_RSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT3_TFS
+#define P_SPORT3_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DTSEC
+#define P_SPORT3_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DTPRI
+#define P_SPORT3_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT3_TSCLK
+#define P_SPORT3_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT3_RFS
+#define P_SPORT3_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DRSEC
+#define P_SPORT3_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DRPRI
+#define P_SPORT3_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT3_RSCLK
+#define P_SPORT3_RSCLK P_UNDEF
+#endif
+
+#ifndef P_TMR4
+#define P_TMR4 P_UNDEF
+#endif
+
+#ifndef P_TMR5
+#define P_TMR5 P_UNDEF
+#endif
+
+#ifndef P_TMR6
+#define P_TMR6 P_UNDEF
+#endif
+
+#ifndef P_TMR7
+#define P_TMR7 P_UNDEF
+#endif
+
+#ifndef P_TWI1_SCL
+#define P_TWI1_SCL P_UNDEF
+#endif
+
+#ifndef P_TWI1_SDA
+#define P_TWI1_SDA P_UNDEF
+#endif
+
+#ifndef P_UART3_RTS
+#define P_UART3_RTS P_UNDEF
+#endif
+
+#ifndef P_UART3_CTS
+#define P_UART3_CTS P_UNDEF
+#endif
+
+#ifndef P_UART2_TX
+#define P_UART2_TX P_UNDEF
+#endif
+
+#ifndef P_UART2_RX
+#define P_UART2_RX P_UNDEF
+#endif
+
+#ifndef P_UART3_TX
+#define P_UART3_TX P_UNDEF
+#endif
+
+#ifndef P_UART3_RX
+#define P_UART3_RX P_UNDEF
+#endif
+
+#ifndef P_SPI2_SS
+#define P_SPI2_SS P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL1
+#define P_SPI2_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL2
+#define P_SPI2_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL3
+#define P_SPI2_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL4
+#define P_SPI2_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL5
+#define P_SPI2_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL6
+#define P_SPI2_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL7
+#define P_SPI2_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SCK
+#define P_SPI2_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI2_MOSI
+#define P_SPI2_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI2_MISO
+#define P_SPI2_MISO P_UNDEF
+#endif
+
+#ifndef P_TMR0
+#define P_TMR0 P_UNDEF
+#endif
+
+#ifndef P_TMR1
+#define P_TMR1 P_UNDEF
+#endif
+
+#ifndef P_TMR2
+#define P_TMR2 P_UNDEF
+#endif
+
+#ifndef P_TMR3
+#define P_TMR3 P_UNDEF
+#endif
+
+#ifndef P_SPORT0_TFS
+#define P_SPORT0_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DTSEC
+#define P_SPORT0_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DTPRI
+#define P_SPORT0_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT0_TSCLK
+#define P_SPORT0_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT0_RFS
+#define P_SPORT0_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DRSEC
+#define P_SPORT0_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DRPRI
+#define P_SPORT0_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT0_RSCLK
+#define P_SPORT0_RSCLK P_UNDEF
+#endif
+
+#ifndef P_SD_D0
+#define P_SD_D0 P_UNDEF
+#endif
+
+#ifndef P_SD_D1
+#define P_SD_D1 P_UNDEF
+#endif
+
+#ifndef P_SD_D2
+#define P_SD_D2 P_UNDEF
+#endif
+
+#ifndef P_SD_D3
+#define P_SD_D3 P_UNDEF
+#endif
+
+#ifndef P_SD_CLK
+#define P_SD_CLK P_UNDEF
+#endif
+
+#ifndef P_SD_CMD
+#define P_SD_CMD P_UNDEF
+#endif
+
+#ifndef P_MMCLK
+#define P_MMCLK P_UNDEF
+#endif
+
+#ifndef P_MBCLK
+#define P_MBCLK P_UNDEF
+#endif
+
+#ifndef P_PPI1_D0
+#define P_PPI1_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D1
+#define P_PPI1_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D2
+#define P_PPI1_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D3
+#define P_PPI1_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D4
+#define P_PPI1_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D5
+#define P_PPI1_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D6
+#define P_PPI1_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D7
+#define P_PPI1_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D8
+#define P_PPI1_D8 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D9
+#define P_PPI1_D9 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D10
+#define P_PPI1_D10 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D11
+#define P_PPI1_D11 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D12
+#define P_PPI1_D12 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D13
+#define P_PPI1_D13 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D14
+#define P_PPI1_D14 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D15
+#define P_PPI1_D15 P_UNDEF
+#endif
+
+#ifndef P_HOST_D8
+#define P_HOST_D8 P_UNDEF
+#endif
+
+#ifndef P_HOST_D9
+#define P_HOST_D9 P_UNDEF
+#endif
+
+#ifndef P_HOST_D10
+#define P_HOST_D10 P_UNDEF
+#endif
+
+#ifndef P_HOST_D11
+#define P_HOST_D11 P_UNDEF
+#endif
+
+#ifndef P_HOST_D12
+#define P_HOST_D12 P_UNDEF
+#endif
+
+#ifndef P_HOST_D13
+#define P_HOST_D13 P_UNDEF
+#endif
+
+#ifndef P_HOST_D14
+#define P_HOST_D14 P_UNDEF
+#endif
+
+#ifndef P_HOST_D15
+#define P_HOST_D15 P_UNDEF
+#endif
+
+#ifndef P_HOST_D0
+#define P_HOST_D0 P_UNDEF
+#endif
+
+#ifndef P_HOST_D1
+#define P_HOST_D1 P_UNDEF
+#endif
+
+#ifndef P_HOST_D2
+#define P_HOST_D2 P_UNDEF
+#endif
+
+#ifndef P_HOST_D3
+#define P_HOST_D3 P_UNDEF
+#endif
+
+#ifndef P_HOST_D4
+#define P_HOST_D4 P_UNDEF
+#endif
+
+#ifndef P_HOST_D5
+#define P_HOST_D5 P_UNDEF
+#endif
+
+#ifndef P_HOST_D6
+#define P_HOST_D6 P_UNDEF
+#endif
+
+#ifndef P_HOST_D7
+#define P_HOST_D7 P_UNDEF
+#endif
+
+#ifndef P_SPORT1_TFS
+#define P_SPORT1_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DTSEC
+#define P_SPORT1_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DTPRI
+#define P_SPORT1_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT1_TSCLK
+#define P_SPORT1_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT1_RFS
+#define P_SPORT1_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DRSEC
+#define P_SPORT1_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DRPRI
+#define P_SPORT1_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT1_RSCLK
+#define P_SPORT1_RSCLK P_UNDEF
+#endif
+
+#ifndef P_PPI2_D0
+#define P_PPI2_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D1
+#define P_PPI2_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D2
+#define P_PPI2_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D3
+#define P_PPI2_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D4
+#define P_PPI2_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D5
+#define P_PPI2_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D6
+#define P_PPI2_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D7
+#define P_PPI2_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D18
+#define P_PPI0_D18 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D19
+#define P_PPI0_D19 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D20
+#define P_PPI0_D20 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D21
+#define P_PPI0_D21 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D22
+#define P_PPI0_D22 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D23
+#define P_PPI0_D23 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW0
+#define P_KEY_ROW0 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW1
+#define P_KEY_ROW1 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW2
+#define P_KEY_ROW2 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW3
+#define P_KEY_ROW3 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL0
+#define P_KEY_COL0 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL1
+#define P_KEY_COL1 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL2
+#define P_KEY_COL2 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL3
+#define P_KEY_COL3 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SCK
+#define P_SPI0_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI0_MISO
+#define P_SPI0_MISO P_UNDEF
+#endif
+
+#ifndef P_SPI0_MOSI
+#define P_SPI0_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI0_SS
+#define P_SPI0_SS P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL1
+#define P_SPI0_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL2
+#define P_SPI0_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL3
+#define P_SPI0_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL4
+#define P_SPI0_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL5
+#define P_SPI0_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL6
+#define P_SPI0_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL7
+#define P_SPI0_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_UART0_TX
+#define P_UART0_TX P_UNDEF
+#endif
+
+#ifndef P_UART0_RX
+#define P_UART0_RX P_UNDEF
+#endif
+
+#ifndef P_UART1_RTS
+#define P_UART1_RTS P_UNDEF
+#endif
+
+#ifndef P_UART1_CTS
+#define P_UART1_CTS P_UNDEF
+#endif
+
+#ifndef P_PPI1_CLK
+#define P_PPI1_CLK P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS1
+#define P_PPI1_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS2
+#define P_PPI1_FS2 P_UNDEF
+#endif
+
+#ifndef P_TWI0_SCL
+#define P_TWI0_SCL P_UNDEF
+#endif
+
+#ifndef P_TWI0_SDA
+#define P_TWI0_SDA P_UNDEF
+#endif
+
+#ifndef P_KEY_COL7
+#define P_KEY_COL7 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW6
+#define P_KEY_ROW6 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL6
+#define P_KEY_COL6 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW5
+#define P_KEY_ROW5 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL5
+#define P_KEY_COL5 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW4
+#define P_KEY_ROW4 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL4
+#define P_KEY_COL4 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW7
+#define P_KEY_ROW7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D0
+#define P_PPI0_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D1
+#define P_PPI0_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D2
+#define P_PPI0_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D3
+#define P_PPI0_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D4
+#define P_PPI0_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D5
+#define P_PPI0_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D6
+#define P_PPI0_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D7
+#define P_PPI0_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D8
+#define P_PPI0_D8 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D9
+#define P_PPI0_D9 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D10
+#define P_PPI0_D10 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D11
+#define P_PPI0_D11 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D12
+#define P_PPI0_D12 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D13
+#define P_PPI0_D13 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D14
+#define P_PPI0_D14 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D15
+#define P_PPI0_D15 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D0A
+#define P_ATAPI_D0A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D1A
+#define P_ATAPI_D1A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D2A
+#define P_ATAPI_D2A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D3A
+#define P_ATAPI_D3A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D4A
+#define P_ATAPI_D4A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D5A
+#define P_ATAPI_D5A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D6A
+#define P_ATAPI_D6A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D7A
+#define P_ATAPI_D7A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D8A
+#define P_ATAPI_D8A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D9A
+#define P_ATAPI_D9A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D10A
+#define P_ATAPI_D10A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D11A
+#define P_ATAPI_D11A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D12A
+#define P_ATAPI_D12A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D13A
+#define P_ATAPI_D13A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D14A
+#define P_ATAPI_D14A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D15A
+#define P_ATAPI_D15A P_UNDEF
+#endif
+
+#ifndef P_PPI0_CLK
+#define P_PPI0_CLK P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS1
+#define P_PPI0_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS2
+#define P_PPI0_FS2 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D16
+#define P_PPI0_D16 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D17
+#define P_PPI0_D17 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL1
+#define P_SPI1_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL2
+#define P_SPI1_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL3
+#define P_SPI1_SSEL3 P_UNDEF
+#endif
+
+
+#ifndef P_SPI1_SSEL4
+#define P_SPI1_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL5
+#define P_SPI1_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL6
+#define P_SPI1_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL7
+#define P_SPI1_SSEL7 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SCK
+#define P_SPI1_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI1_MISO
+#define P_SPI1_MISO P_UNDEF
+#endif
+
+#ifndef P_SPI1_MOSI
+#define P_SPI1_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI1_SS
+#define P_SPI1_SS P_UNDEF
+#endif
+
+#ifndef P_CAN0_TX
+#define P_CAN0_TX P_UNDEF
+#endif
+
+#ifndef P_CAN0_RX
+#define P_CAN0_RX P_UNDEF
+#endif
+
+#ifndef P_CAN1_TX
+#define P_CAN1_TX P_UNDEF
+#endif
+
+#ifndef P_CAN1_RX
+#define P_CAN1_RX P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A0A
+#define P_ATAPI_A0A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A1A
+#define P_ATAPI_A1A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A2A
+#define P_ATAPI_A2A P_UNDEF
+#endif
+
+#ifndef P_HOST_CE
+#define P_HOST_CE P_UNDEF
+#endif
+
+#ifndef P_HOST_RD
+#define P_HOST_RD P_UNDEF
+#endif
+
+#ifndef P_HOST_WR
+#define P_HOST_WR P_UNDEF
+#endif
+
+#ifndef P_MTXONB
+#define P_MTXONB P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS2
+#define P_PPI2_FS2 P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS1
+#define P_PPI2_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI2_CLK
+#define P_PPI2_CLK P_UNDEF
+#endif
+
+#ifndef P_CNT_CZM
+#define P_CNT_CZM P_UNDEF
+#endif
+
+#ifndef P_UART1_TX
+#define P_UART1_TX P_UNDEF
+#endif
+
+#ifndef P_UART1_RX
+#define P_UART1_RX P_UNDEF
+#endif
+
+#ifndef P_ATAPI_RESET
+#define P_ATAPI_RESET P_UNDEF
+#endif
+
+#ifndef P_HOST_ADDR
+#define P_HOST_ADDR P_UNDEF
+#endif
+
+#ifndef P_HOST_ACK
+#define P_HOST_ACK P_UNDEF
+#endif
+
+#ifndef P_MTX
+#define P_MTX P_UNDEF
+#endif
+
+#ifndef P_MRX
+#define P_MRX P_UNDEF
+#endif
+
+#ifndef P_MRXONB
+#define P_MRXONB P_UNDEF
+#endif
+
+#ifndef P_A4
+#define P_A4 P_UNDEF
+#endif
+
+#ifndef P_A5
+#define P_A5 P_UNDEF
+#endif
+
+#ifndef P_A6
+#define P_A6 P_UNDEF
+#endif
+
+#ifndef P_A7
+#define P_A7 P_UNDEF
+#endif
+
+#ifndef P_A8
+#define P_A8 P_UNDEF
+#endif
+
+#ifndef P_A9
+#define P_A9 P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS3
+#define P_PPI1_FS3 P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS3
+#define P_PPI2_FS3 P_UNDEF
+#endif
+
+#ifndef P_TMR8
+#define P_TMR8 P_UNDEF
+#endif
+
+#ifndef P_TMR9
+#define P_TMR9 P_UNDEF
+#endif
+
+#ifndef P_TMR10
+#define P_TMR10 P_UNDEF
+#endif
+#ifndef P_TMR11
+#define P_TMR11 P_UNDEF
+#endif
+
+#ifndef P_DMAR0
+#define P_DMAR0 P_UNDEF
+#endif
+
+#ifndef P_DMAR1
+#define P_DMAR1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS3
+#define P_PPI0_FS3 P_UNDEF
+#endif
+
+#ifndef P_CNT_CDG
+#define P_CNT_CDG P_UNDEF
+#endif
+
+#ifndef P_CNT_CUD
+#define P_CNT_CUD P_UNDEF
+#endif
+
+#ifndef P_A10
+#define P_A10 P_UNDEF
+#endif
+
+#ifndef P_A11
+#define P_A11 P_UNDEF
+#endif
+
+#ifndef P_A12
+#define P_A12 P_UNDEF
+#endif
+
+#ifndef P_A13
+#define P_A13 P_UNDEF
+#endif
+
+#ifndef P_A14
+#define P_A14 P_UNDEF
+#endif
+
+#ifndef P_A15
+#define P_A15 P_UNDEF
+#endif
+
+#ifndef P_A16
+#define P_A16 P_UNDEF
+#endif
+
+#ifndef P_A17
+#define P_A17 P_UNDEF
+#endif
+
+#ifndef P_A18
+#define P_A18 P_UNDEF
+#endif
+
+#ifndef P_A19
+#define P_A19 P_UNDEF
+#endif
+
+#ifndef P_A20
+#define P_A20 P_UNDEF
+#endif
+
+#ifndef P_A21
+#define P_A21 P_UNDEF
+#endif
+
+#ifndef P_A22
+#define P_A22 P_UNDEF
+#endif
+
+#ifndef P_A23
+#define P_A23 P_UNDEF
+#endif
+
+#ifndef P_A24
+#define P_A24 P_UNDEF
+#endif
+
+#ifndef P_A25
+#define P_A25 P_UNDEF
+#endif
+
+#ifndef P_NOR_CLK
+#define P_NOR_CLK P_UNDEF
+#endif
+
+#ifndef  P_TMRCLK
+#define  P_TMRCLK P_UNDEF
+#endif
+
+#ifndef P_AMC_ARDY_NOR_WAIT
+#define P_AMC_ARDY_NOR_WAIT P_UNDEF
+#endif
+
+#ifndef P_NAND_CE
+#define P_NAND_CE P_UNDEF
+#endif
+
+#ifndef P_NAND_RB
+#define P_NAND_RB P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DIOR
+#define P_ATAPI_DIOR P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DIOW
+#define P_ATAPI_DIOW P_UNDEF
+#endif
+
+#ifndef P_ATAPI_CS0
+#define P_ATAPI_CS0 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_CS1
+#define P_ATAPI_CS1 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DMACK
+#define P_ATAPI_DMACK P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DMARQ
+#define P_ATAPI_DMARQ P_UNDEF
+#endif
+
+#ifndef P_ATAPI_INTRQ
+#define P_ATAPI_INTRQ P_UNDEF
+#endif
+
+#ifndef P_ATAPI_IORDY
+#define P_ATAPI_IORDY P_UNDEF
+#endif
+
+#ifndef P_AMC_BR
+#define P_AMC_BR P_UNDEF
+#endif
+
+#ifndef P_AMC_BG
+#define P_AMC_BG P_UNDEF
+#endif
+
+#ifndef P_AMC_BGH
+#define P_AMC_BGH P_UNDEF
+#endif
+
+/* EMAC */
+
+#ifndef P_MII0_ETxD0
+#define P_MII0_ETxD0 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD1
+#define P_MII0_ETxD1 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD2
+#define P_MII0_ETxD2 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD3
+#define P_MII0_ETxD3 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxEN
+#define P_MII0_ETxEN P_UNDEF
+#endif
+
+#ifndef P_MII0_TxCLK
+#define P_MII0_TxCLK P_UNDEF
+#endif
+
+#ifndef P_MII0_PHYINT
+#define P_MII0_PHYINT P_UNDEF
+#endif
+
+#ifndef P_MII0_COL
+#define P_MII0_COL P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD0
+#define P_MII0_ERxD0 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD1
+#define P_MII0_ERxD1 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD2
+#define P_MII0_ERxD2 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD3
+#define P_MII0_ERxD3 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxDV
+#define P_MII0_ERxDV P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxCLK
+#define P_MII0_ERxCLK P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxER
+#define P_MII0_ERxER P_UNDEF
+#endif
+
+#ifndef P_MII0_CRS
+#define P_MII0_CRS P_UNDEF
+#endif
+
+#ifndef P_RMII0_REF_CLK
+#define P_RMII0_REF_CLK P_UNDEF
+#endif
+
+#ifndef P_RMII0_MDINT
+#define P_RMII0_MDINT P_UNDEF
+#endif
+
+#ifndef P_RMII0_CRS_DV
+#define P_RMII0_CRS_DV P_UNDEF
+#endif
+
+#ifndef P_MDC
+#define P_MDC P_UNDEF
+#endif
+
+#ifndef P_MDIO
+#define P_MDIO P_UNDEF
+#endif
+
+#endif				/* _PORTMUX_H_ */
diff --git a/arch/blackfin/include/asm/posix_types.h b/arch/blackfin/include/asm/posix_types.h
new file mode 100644
index 00000000000..23aa1f8c1bd
--- /dev/null
+++ b/arch/blackfin/include/asm/posix_types.h
@@ -0,0 +1,61 @@
+#ifndef __ARCH_BFIN_POSIX_TYPES_H
+#define __ARCH_BFIN_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned int __kernel_ipc_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char *__kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+	int val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef	__FD_SET
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef	__FD_CLR
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef	__FD_ISSET
+#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif				/* defined(__KERNEL__) */
+
+#endif
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
new file mode 100644
index 00000000000..6f3995b119d
--- /dev/null
+++ b/arch/blackfin/include/asm/processor.h
@@ -0,0 +1,158 @@
+#ifndef __ASM_BFIN_PROCESSOR_H
+#define __ASM_BFIN_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <asm/blackfin.h>
+#include <asm/segment.h>
+#include <linux/compiler.h>
+
+static inline unsigned long rdusp(void)
+{
+	unsigned long usp;
+
+	__asm__ __volatile__("%0 = usp;\n\t":"=da"(usp));
+	return usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+	__asm__ __volatile__("usp = %0;\n\t"::"da"(usp));
+}
+
+/*
+ * User space process size: 1st byte beyond user address space.
+ * Fairly meaningless on nommu.  Parts of user programs can be scattered
+ * in a lot of places, so just disable this by setting it to 0xFFFFFFFF.
+ */
+#define TASK_SIZE	0xFFFFFFFF
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#endif
+
+#define TASK_UNMAPPED_BASE	0
+
+struct thread_struct {
+	unsigned long ksp;	/* kernel stack pointer */
+	unsigned long usp;	/* user stack pointer */
+	unsigned short seqstat;	/* saved status register */
+	unsigned long esp0;	/* points to SR of stack frame pt_regs */
+	unsigned long pc;	/* instruction pointer */
+	void *        debuggerinfo;
+};
+
+#define INIT_THREAD  {						\
+	sizeof(init_stack) + (unsigned long) init_stack, 0,	\
+	PS_S, 0, 0						\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp)					\
+do {									\
+	set_fs(USER_DS);						\
+	(_regs)->pc = (_pc);						\
+	if (current->mm)						\
+		(_regs)->p5 = current->mm->start_data;			\
+	task_thread_info(current)->l1_task_info.stack_start		\
+		= (void *)current->mm->context.stack_start;		\
+	task_thread_info(current)->l1_task_info.lowest_sp = (void *)(_usp); \
+	memcpy(L1_SCRATCH_TASK_INFO, &task_thread_info(current)->l1_task_info, \
+		sizeof(*L1_SCRATCH_TASK_INFO));				\
+	wrusp(_usp);							\
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)							\
+    ({									\
+	unsigned long eip = 0;						\
+	if ((tsk)->thread.esp0 > PAGE_SIZE &&				\
+	    MAP_NR((tsk)->thread.esp0) < max_mapnr)			\
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc;	\
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    	barrier()
+
+/* Get the Silicon Revision of the chip */
+static inline uint32_t __pure bfin_revid(void)
+{
+	/* stored in the upper 4 bits */
+	uint32_t revid = bfin_read_CHIPID() >> 28;
+
+#ifdef CONFIG_BF52x
+	/* ANOMALY_05000357
+	 * Incorrect Revision Number in DSPID Register
+	 */
+	if (revid == 0)
+		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
+		case 0x0010:
+			revid = 0;
+			break;
+		case 0x2796:
+			revid = 1;
+			break;
+		default:
+			revid = 0xFFFF;
+			break;
+		}
+#endif
+	return revid;
+}
+
+static inline uint32_t __pure bfin_compiled_revid(void)
+{
+#if defined(CONFIG_BF_REV_0_0)
+	return 0;
+#elif defined(CONFIG_BF_REV_0_1)
+	return 1;
+#elif defined(CONFIG_BF_REV_0_2)
+	return 2;
+#elif defined(CONFIG_BF_REV_0_3)
+	return 3;
+#elif defined(CONFIG_BF_REV_0_4)
+	return 4;
+#elif defined(CONFIG_BF_REV_0_5)
+	return 5;
+#elif defined(CONFIG_BF_REV_ANY)
+	return 0xffff;
+#else
+	return -1;
+#endif
+}
+
+#endif
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
new file mode 100644
index 00000000000..a45a80e54ad
--- /dev/null
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -0,0 +1,168 @@
+#ifndef _BFIN_PTRACE_H
+#define _BFIN_PTRACE_H
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *       0 - 7 are data registers R0-R7
+ *       8 - 15 are address registers P0-P7
+ *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
+ *      32 - 33 A registers A0 & A1
+ *      34 -    status register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *      32-33 --- Low 32-bit of A0&1
+ *      34-35 --- High 8-bit of A0&1
+ */
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long orig_pc;
+	long ipend;
+	long seqstat;
+	long rete;
+	long retn;
+	long retx;
+	long pc;		/* PC == RETI */
+	long rets;
+	long reserved;		/* Used as scratch during system calls */
+	long astat;
+	long lb1;
+	long lb0;
+	long lt1;
+	long lt0;
+	long lc1;
+	long lc0;
+	long a1w;
+	long a1x;
+	long a0w;
+	long a0x;
+	long b3;
+	long b2;
+	long b1;
+	long b0;
+	long l3;
+	long l2;
+	long l1;
+	long l0;
+	long m3;
+	long m2;
+	long m1;
+	long m0;
+	long i3;
+	long i2;
+	long i1;
+	long i0;
+	long usp;
+	long fp;
+	long p5;
+	long p4;
+	long p3;
+	long p2;
+	long p1;
+	long p0;
+	long r7;
+	long r6;
+	long r5;
+	long r4;
+	long r3;
+	long r2;
+	long r1;
+	long r0;
+	long orig_r0;
+	long orig_p0;
+	long syscfg;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13	/* ptrace signal  */
+
+#define PTRACE_GETFDPIC           31
+#define PTRACE_GETFDPIC_EXEC      0
+#define PTRACE_GETFDPIC_INTERP    1
+
+#define PS_S  (0x0002)
+
+#ifdef __KERNEL__
+
+/* user_mode returns true if only one bit is set in IPEND, other than the
+   master interrupt enable.  */
+#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+
+#endif  /*  __KERNEL__  */
+
+#endif				/* __ASSEMBLY__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
+
+#define PT_R0 204
+#define PT_R1 200
+#define PT_R2 196
+#define PT_R3 192
+#define PT_R4 188
+#define PT_R5 184
+#define PT_R6 180
+#define PT_R7 176
+#define PT_P0 172
+#define PT_P1 168
+#define PT_P2 164
+#define PT_P3 160
+#define PT_P4 156
+#define PT_P5 152
+#define PT_FP 148
+#define PT_USP 144
+#define PT_I0 140
+#define PT_I1 136
+#define PT_I2 132
+#define PT_I3 128
+#define PT_M0 124
+#define PT_M1 120
+#define PT_M2 116
+#define PT_M3 112
+#define PT_L0 108
+#define PT_L1 104
+#define PT_L2 100
+#define PT_L3 96
+#define PT_B0 92
+#define PT_B1 88
+#define PT_B2 84
+#define PT_B3 80
+#define PT_A0X 76
+#define PT_A0W 72
+#define PT_A1X 68
+#define PT_A1W 64
+#define PT_LC0 60
+#define PT_LC1 56
+#define PT_LT0 52
+#define PT_LT1 48
+#define PT_LB0 44
+#define PT_LB1 40
+#define PT_ASTAT 36
+#define PT_RESERVED 32
+#define PT_RETS 28
+#define PT_PC 24
+#define PT_RETX 20
+#define PT_RETN 16
+#define PT_RETE 12
+#define PT_SEQSTAT 8
+#define PT_IPEND 4
+
+#define PT_SYSCFG 216
+#define PT_TEXT_ADDR 220
+#define PT_TEXT_END_ADDR 224
+#define PT_DATA_ADDR 228
+#define PT_FDPIC_EXEC 232
+#define PT_FDPIC_INTERP 236
+
+#endif				/* _BFIN_PTRACE_H */
diff --git a/arch/blackfin/include/asm/reboot.h b/arch/blackfin/include/asm/reboot.h
new file mode 100644
index 00000000000..6d448b5f598
--- /dev/null
+++ b/arch/blackfin/include/asm/reboot.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-blackfin/reboot.h - shutdown/reboot header
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_REBOOT_H__
+#define __ASM_REBOOT_H__
+
+/* optional board specific hooks */
+extern void native_machine_restart(char *cmd);
+extern void native_machine_halt(void);
+extern void native_machine_power_off(void);
+
+/* common reboot workarounds */
+extern void bfin_gpio_reset_spi0_ssel1(void);
+
+#endif
diff --git a/arch/blackfin/include/asm/resource.h b/arch/blackfin/include/asm/resource.h
new file mode 100644
index 00000000000..091355ab349
--- /dev/null
+++ b/arch/blackfin/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef _BFIN_RESOURCE_H
+#define _BFIN_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif				/* _BFIN_RESOURCE_H */
diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h
new file mode 100644
index 00000000000..04f448711cd
--- /dev/null
+++ b/arch/blackfin/include/asm/scatterlist.h
@@ -0,0 +1,28 @@
+#ifndef _BLACKFIN_SCATTERLIST_H
+#define _BLACKFIN_SCATTERLIST_H
+
+#include <linux/mm.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+	dma_addr_t dma_address;
+	unsigned int length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#define ISA_DMA_THRESHOLD	(0xffffffff)
+
+#endif				/* !(_BLACKFIN_SCATTERLIST_H) */
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
new file mode 100644
index 00000000000..1443c3353a8
--- /dev/null
+++ b/arch/blackfin/include/asm/sections.h
@@ -0,0 +1,7 @@
+#ifndef _BLACKFIN_SECTIONS_H
+#define _BLACKFIN_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/blackfin/include/asm/segment.h b/arch/blackfin/include/asm/segment.h
new file mode 100644
index 00000000000..02cfd09b5a9
--- /dev/null
+++ b/arch/blackfin/include/asm/segment.h
@@ -0,0 +1,7 @@
+#ifndef _BFIN_SEGMENT_H
+#define _BFIN_SEGMENT_H
+
+#define KERNEL_DS   (0x5)
+#define USER_DS     (0x1)
+
+#endif				/* _BFIN_SEGMENT_H */
diff --git a/arch/blackfin/include/asm/sembuf.h b/arch/blackfin/include/asm/sembuf.h
new file mode 100644
index 00000000000..18deb5c7fa5
--- /dev/null
+++ b/arch/blackfin/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _BFIN_SEMBUF_H
+#define _BFIN_SEMBUF_H
+
+/*
+ * The semid64_ds structure for bfin architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t sem_otime;	/* last semop time */
+	unsigned long __unused1;
+	__kernel_time_t sem_ctime;	/* last change time */
+	unsigned long __unused2;
+	unsigned long sem_nsems;	/* no. of semaphores in array */
+	unsigned long __unused3;
+	unsigned long __unused4;
+};
+
+#endif				/* _BFIN_SEMBUF_H */
diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h
new file mode 100644
index 00000000000..994dd869558
--- /dev/null
+++ b/arch/blackfin/include/asm/serial.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-blackfin/serial.h
+ */
+
+#define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH
diff --git a/arch/blackfin/include/asm/setup.h b/arch/blackfin/include/asm/setup.h
new file mode 100644
index 00000000000..01c8c6cbe6f
--- /dev/null
+++ b/arch/blackfin/include/asm/setup.h
@@ -0,0 +1,17 @@
+/*
+** asm/setup.h -- Definition of the Linux/bfin setup information
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Copyright Lineo, Inc 2001          Tony Kou
+**
+*/
+
+#ifndef _BFIN_SETUP_H
+#define _BFIN_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif				/* _BFIN_SETUP_H */
diff --git a/arch/blackfin/include/asm/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h
new file mode 100644
index 00000000000..612436303e8
--- /dev/null
+++ b/arch/blackfin/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _BFIN_SHMBUF_H
+#define _BFIN_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for bfin architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm shm_perm;	/* operation perms */
+	size_t shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t shm_atime;	/* last attach time */
+	unsigned long __unused1;
+	__kernel_time_t shm_dtime;	/* last detach time */
+	unsigned long __unused2;
+	__kernel_time_t shm_ctime;	/* last change time */
+	unsigned long __unused3;
+	__kernel_pid_t shm_cpid;	/* pid of creator */
+	__kernel_pid_t shm_lpid;	/* pid of last operator */
+	unsigned long shm_nattch;	/* no. of current attaches */
+	unsigned long __unused4;
+	unsigned long __unused5;
+};
+
+struct shminfo64 {
+	unsigned long shmmax;
+	unsigned long shmmin;
+	unsigned long shmmni;
+	unsigned long shmseg;
+	unsigned long shmall;
+	unsigned long __unused1;
+	unsigned long __unused2;
+	unsigned long __unused3;
+	unsigned long __unused4;
+};
+
+#endif				/* _BFIN_SHMBUF_H */
diff --git a/arch/blackfin/include/asm/shmparam.h b/arch/blackfin/include/asm/shmparam.h
new file mode 100644
index 00000000000..3c03906b766
--- /dev/null
+++ b/arch/blackfin/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _BFIN_SHMPARAM_H
+#define _BFIN_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE	/* attach addr a multiple of this */
+
+#endif				/* _BFIN_SHMPARAM_H */
diff --git a/arch/blackfin/include/asm/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h
new file mode 100644
index 00000000000..ce00b03c277
--- /dev/null
+++ b/arch/blackfin/include/asm/sigcontext.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_BLACKFIN_SIGCONTEXT_H
+#define _ASM_BLACKFIN_SIGCONTEXT_H
+
+/* Add new entries at the end of the structure only.  */
+struct sigcontext {
+	unsigned long sc_r0;
+	unsigned long sc_r1;
+	unsigned long sc_r2;
+	unsigned long sc_r3;
+	unsigned long sc_r4;
+	unsigned long sc_r5;
+	unsigned long sc_r6;
+	unsigned long sc_r7;
+	unsigned long sc_p0;
+	unsigned long sc_p1;
+	unsigned long sc_p2;
+	unsigned long sc_p3;
+	unsigned long sc_p4;
+	unsigned long sc_p5;
+	unsigned long sc_usp;
+	unsigned long sc_a0w;
+	unsigned long sc_a1w;
+	unsigned long sc_a0x;
+	unsigned long sc_a1x;
+	unsigned long sc_astat;
+	unsigned long sc_rets;
+	unsigned long sc_pc;
+	unsigned long sc_retx;
+	unsigned long sc_fp;
+	unsigned long sc_i0;
+	unsigned long sc_i1;
+	unsigned long sc_i2;
+	unsigned long sc_i3;
+	unsigned long sc_m0;
+	unsigned long sc_m1;
+	unsigned long sc_m2;
+	unsigned long sc_m3;
+	unsigned long sc_l0;
+	unsigned long sc_l1;
+	unsigned long sc_l2;
+	unsigned long sc_l3;
+	unsigned long sc_b0;
+	unsigned long sc_b1;
+	unsigned long sc_b2;
+	unsigned long sc_b3;
+	unsigned long sc_lc0;
+	unsigned long sc_lc1;
+	unsigned long sc_lt0;
+	unsigned long sc_lt1;
+	unsigned long sc_lb0;
+	unsigned long sc_lb1;
+	unsigned long sc_seqstat;
+};
+
+#endif
diff --git a/arch/blackfin/include/asm/siginfo.h b/arch/blackfin/include/asm/siginfo.h
new file mode 100644
index 00000000000..eca4565cea3
--- /dev/null
+++ b/arch/blackfin/include/asm/siginfo.h
@@ -0,0 +1,35 @@
+#ifndef _BFIN_SIGINFO_H
+#define _BFIN_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#define UID16_SIGINFO_COMPAT_NEEDED
+
+#define si_uid16	_sifields._kill._uid
+
+#define ILL_ILLPARAOP	(__SI_FAULT|2)	/* illegal opcode combine ********** */
+#define ILL_ILLEXCPT	(__SI_FAULT|4)	/* unrecoverable exception ********** */
+#define ILL_CPLB_VI	(__SI_FAULT|9)	/* D/I CPLB protect violation ******** */
+#define ILL_CPLB_MISS	(__SI_FAULT|10)	/* D/I CPLB miss ******** */
+#define ILL_CPLB_MULHIT	(__SI_FAULT|11)	/* D/I CPLB multiple hit ******** */
+
+/*
+ * SIGBUS si_codes
+ */
+#define BUS_OPFETCH	(__SI_FAULT|4)	/* error from instruction fetch ******** */
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_STEP	(__SI_FAULT|1)	/* single-step breakpoint************* */
+#define TRAP_TRACEFLOW	(__SI_FAULT|2)	/* trace buffer overflow ************* */
+#define TRAP_WATCHPT	(__SI_FAULT|3)	/* watchpoint match      ************* */
+#define TRAP_ILLTRAP	(__SI_FAULT|4)	/* illegal trap          ************* */
+
+/*
+ * SIGSEGV si_codes
+ */
+#define SEGV_STACKFLOW	(__SI_FAULT|3)	/* stack overflow */
+
+#endif
diff --git a/arch/blackfin/include/asm/signal.h b/arch/blackfin/include/asm/signal.h
new file mode 100644
index 00000000000..87951d25145
--- /dev/null
+++ b/arch/blackfin/include/asm/signal.h
@@ -0,0 +1,160 @@
+#ifndef _BLACKFIN_SIGNAL_H
+#define _BLACKFIN_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;	/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif				/* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002	/* not supported yet */
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer) (void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer) (void);
+	sigset_t sa_mask;	/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+		__sighandler_t _sa_handler;
+		void (*_sa_sigaction) (int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer) (void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif				/* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _BLACKFIN_SIGNAL_H */
diff --git a/arch/blackfin/include/asm/socket.h b/arch/blackfin/include/asm/socket.h
new file mode 100644
index 00000000000..2ca702e44d4
--- /dev/null
+++ b/arch/blackfin/include/asm/socket.h
@@ -0,0 +1,56 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif				/* _ASM_SOCKET_H */
diff --git a/arch/blackfin/include/asm/sockios.h b/arch/blackfin/include/asm/sockios.h
new file mode 100644
index 00000000000..426b89bfaa8
--- /dev/null
+++ b/arch/blackfin/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ARCH_BFIN_SOCKIOS__
+#define __ARCH_BFIN_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906	/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907	/* Get stamp (timespec) */
+
+#endif				/* __ARCH_BFIN_SOCKIOS__ */
diff --git a/arch/blackfin/include/asm/spinlock.h b/arch/blackfin/include/asm/spinlock.h
new file mode 100644
index 00000000000..64e908a5064
--- /dev/null
+++ b/arch/blackfin/include/asm/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __BFIN_SPINLOCK_H
+#define __BFIN_SPINLOCK_H
+
+#error blackfin architecture does not support SMP spin lock yet
+
+#endif
diff --git a/arch/blackfin/include/asm/stat.h b/arch/blackfin/include/asm/stat.h
new file mode 100644
index 00000000000..d2b6f11ec23
--- /dev/null
+++ b/arch/blackfin/include/asm/stat.h
@@ -0,0 +1,63 @@
+#ifndef _BFIN_STAT_H
+#define _BFIN_STAT_H
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long st_size;
+	unsigned long st_blksize;
+	unsigned long st_blocks;
+	unsigned long st_atime;
+	unsigned long __unused1;
+	unsigned long st_mtime;
+	unsigned long __unused2;
+	unsigned long st_ctime;
+	unsigned long __unused3;
+	unsigned long __unused4;
+	unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long st_dev;
+	unsigned char __pad1[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long __st_ino;
+
+	unsigned int st_mode;
+	unsigned int st_nlink;
+
+	unsigned long st_uid;
+	unsigned long st_gid;
+
+	unsigned long long st_rdev;
+	unsigned char __pad2[4];
+
+	long long st_size;
+	unsigned long st_blksize;
+
+	long long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long st_atime;
+	unsigned long st_atime_nsec;
+
+	unsigned long st_mtime;
+	unsigned long st_mtime_nsec;
+
+	unsigned long st_ctime;
+	unsigned long st_ctime_nsec;
+
+	unsigned long long st_ino;
+};
+
+#endif				/* _BFIN_STAT_H */
diff --git a/arch/blackfin/include/asm/statfs.h b/arch/blackfin/include/asm/statfs.h
new file mode 100644
index 00000000000..350672091ba
--- /dev/null
+++ b/arch/blackfin/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _BFIN_STATFS_H
+#define _BFIN_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif				/* _BFIN_STATFS_H */
diff --git a/arch/blackfin/include/asm/string.h b/arch/blackfin/include/asm/string.h
new file mode 100644
index 00000000000..321f4d96e4a
--- /dev/null
+++ b/arch/blackfin/include/asm/string.h
@@ -0,0 +1,137 @@
+#ifndef _BLACKFIN_STRING_H_
+#define _BLACKFIN_STRING_H_
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__		/* only set these up for kernel code */
+
+#define __HAVE_ARCH_STRCPY
+extern inline char *strcpy(char *dest, const char *src)
+{
+	char *xdest = dest;
+	char temp = 0;
+
+	__asm__ __volatile__ (
+		"1:"
+		"%2 = B [%1++] (Z);"
+		"B [%0++] = %2;"
+		"CC = %2;"
+		"if cc jump 1b (bp);"
+		: "+&a" (dest), "+&a" (src), "=&d" (temp)
+		:
+		: "memory", "CC");
+
+	return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+extern inline char *strncpy(char *dest, const char *src, size_t n)
+{
+	char *xdest = dest;
+	char temp = 0;
+
+	if (n == 0)
+		return xdest;
+
+	__asm__ __volatile__ (
+		"1:"
+		"%3 = B [%1++] (Z);"
+		"B [%0++] = %3;"
+		"CC = %3;"
+		"if ! cc jump 2f;"
+		"%2 += -1;"
+		"CC = %2 == 0;"
+		"if ! cc jump 1b (bp);"
+		"jump 4f;"
+		"2:"
+		/* if src is shorter than n, we need to null pad bytes now */
+		"%3 = 0;"
+		"3:"
+		"%2 += -1;"
+		"CC = %2 == 0;"
+		"if cc jump 4f;"
+		"B [%0++] = %3;"
+		"jump 3b;"
+		"4:"
+		: "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp)
+		:
+		: "memory", "CC");
+
+	return xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+extern inline int strcmp(const char *cs, const char *ct)
+{
+	/* need to use int's here so the char's in the assembly don't get
+	 * sign extended incorrectly when we don't want them to be
+	 */
+	int __res1, __res2;
+
+	__asm__ __volatile__ (
+		"1:"
+		"%2 = B[%0++] (Z);"      /* get *cs */
+		"%3 = B[%1++] (Z);"      /* get *ct */
+		"CC = %2 == %3;"         /* compare a byte */
+		"if ! cc jump 2f;"       /* not equal, break out */
+		"CC = %2;"               /* at end of cs? */
+		"if cc jump 1b (bp);"    /* no, keep going */
+		"jump.s 3f;"             /* strings are equal */
+		"2:"
+		"%2 = %2 - %3;"          /* *cs - *ct */
+		"3:"
+		: "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2)
+		:
+		: "memory", "CC");
+
+	return __res1;
+}
+
+#define __HAVE_ARCH_STRNCMP
+extern inline int strncmp(const char *cs, const char *ct, size_t count)
+{
+	/* need to use int's here so the char's in the assembly don't get
+	 * sign extended incorrectly when we don't want them to be
+	 */
+	int __res1, __res2;
+
+	if (!count)
+		return 0;
+
+	__asm__ __volatile__ (
+		"1:"
+		"%3 = B[%0++] (Z);"      /* get *cs */
+		"%4 = B[%1++] (Z);"      /* get *ct */
+		"CC = %3 == %4;"         /* compare a byte */
+		"if ! cc jump 3f;"       /* not equal, break out */
+		"CC = %3;"               /* at end of cs? */
+		"if ! cc jump 4f;"       /* yes, all done */
+		"%2 += -1;"              /* no, adjust count */
+		"CC = %2 == 0;"
+		"if ! cc jump 1b;"       /* more to do, keep going */
+		"2:"
+		"%3 = 0;"                /* strings are equal */
+		"jump.s 4f;"
+		"3:"
+		"%3 = %3 - %4;"          /* *cs - *ct */
+		"4:"
+		: "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2)
+		:
+		: "memory", "CC");
+
+	return __res1;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *s, int c, size_t count);
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *d, const void *s, size_t count);
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *, const void *, __kernel_size_t);
+#define	__HAVE_ARCH_MEMCHR
+extern void *memchr(const void *s, int c, size_t n);
+#define	__HAVE_ARCH_MEMMOVE
+extern void *memmove(void *dest, const void *src, size_t count);
+
+#endif /*__KERNEL__*/
+#endif				/* _BLACKFIN_STRING_H_ */
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
new file mode 100644
index 00000000000..8f1627d8bf0
--- /dev/null
+++ b/arch/blackfin/include/asm/system.h
@@ -0,0 +1,221 @@
+/*
+ * File:        include/asm/system.h
+ * Based on:
+ * Author:      Tony Kou (tonyko@lineo.ca)
+ *              Copyright (c) 2002 Arcturus Networks Inc.
+ *                    (www.arcturusnetworks.com)
+ *              Copyright (c) 2003 Metrowerks (www.metrowerks.com)
+ *              Copyright (c) 2004 Analog Device Inc.
+ * Created:     25Jan2001 - Tony Kou
+ * Description: system.h include file
+ *
+ * Modified:     22Sep2006 - Robin Getz
+ *                - move include blackfin.h down, so I can get access to
+ *                   irq functions in other include files.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BLACKFIN_SYSTEM_H
+#define _BLACKFIN_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+#include <mach/anomaly.h>
+
+/*
+ * Interrupt configuring macros.
+ */
+
+extern unsigned long irq_flags;
+
+#define local_irq_enable() \
+	__asm__ __volatile__( \
+		"sti %0;" \
+		: \
+		: "d" (irq_flags) \
+	)
+
+#define local_irq_disable() \
+	do { \
+		int __tmp_dummy; \
+		__asm__ __volatile__( \
+			"cli %0;" \
+			: "=d" (__tmp_dummy) \
+		); \
+	} while (0)
+
+#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
+# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
+#else
+# define NOP_PAD_ANOMALY_05000244
+#endif
+
+#define idle_with_irq_disabled() \
+	__asm__ __volatile__( \
+		NOP_PAD_ANOMALY_05000244 \
+		".align 8;" \
+		"sti %0;" \
+		"idle;" \
+		: \
+		: "d" (irq_flags) \
+	)
+
+#ifdef CONFIG_DEBUG_HWERR
+# define __save_and_cli(x) \
+	__asm__ __volatile__( \
+		"cli %0;" \
+		"sti %1;" \
+		: "=&d" (x) \
+		: "d" (0x3F) \
+	)
+#else
+# define __save_and_cli(x) \
+	__asm__ __volatile__( \
+		"cli %0;" \
+		: "=&d" (x) \
+	)
+#endif
+
+#define local_save_flags(x) \
+	__asm__ __volatile__( \
+		"cli %0;" \
+		"sti %0;" \
+		: "=d" (x) \
+	)
+
+#ifdef CONFIG_DEBUG_HWERR
+#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
+#else
+#define irqs_enabled_from_flags(x) ((x) != 0x1f)
+#endif
+
+#define local_irq_restore(x) \
+	do { \
+		if (irqs_enabled_from_flags(x)) \
+			local_irq_enable(); \
+	} while (0)
+
+/* For spinlocks etc */
+#define local_irq_save(x) __save_and_cli(x)
+
+#define	irqs_disabled()				\
+({						\
+	unsigned long flags;			\
+	local_save_flags(flags);		\
+	!irqs_enabled_from_flags(flags);	\
+})
+
+/*
+ * Force strict CPU ordering.
+ */
+#define nop()  asm volatile ("nop;\n\t"::)
+#define mb()   asm volatile (""   : : :"memory")
+#define rmb()  asm volatile (""   : : :"memory")
+#define wmb()  asm volatile (""   : : :"memory")
+#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
+
+#define read_barrier_depends() 		do { } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy {
+	unsigned long a[100];
+};
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+				   int size)
+{
+	unsigned long tmp = 0;
+	unsigned long flags = 0;
+
+	local_irq_save(flags);
+
+	switch (size) {
+	case 1:
+		__asm__ __volatile__
+			("%0 = b%2 (z);\n\t"
+			 "b%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	case 2:
+		__asm__ __volatile__
+			("%0 = w%2 (z);\n\t"
+			 "w%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	case 4:
+		__asm__ __volatile__
+			("%0 = %2;\n\t"
+			 "%2 = %1;\n\t"
+			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	}
+	local_irq_restore(flags);
+	return tmp;
+}
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#define prepare_to_switch()     do { } while(0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+
+#include <asm/blackfin.h>
+
+asmlinkage struct task_struct *resume(struct task_struct *prev, struct task_struct *next);
+
+#define switch_to(prev,next,last) \
+do {    \
+	memcpy (&task_thread_info(prev)->l1_task_info, L1_SCRATCH_TASK_INFO, \
+		sizeof *L1_SCRATCH_TASK_INFO); \
+	memcpy (L1_SCRATCH_TASK_INFO, &task_thread_info(next)->l1_task_info, \
+		sizeof *L1_SCRATCH_TASK_INFO); \
+	(last) = resume (prev, next);   \
+} while (0)
+
+#endif				/* _BLACKFIN_SYSTEM_H */
diff --git a/arch/blackfin/include/asm/termbits.h b/arch/blackfin/include/asm/termbits.h
new file mode 100644
index 00000000000..f37feb7cf89
--- /dev/null
+++ b/arch/blackfin/include/asm/termbits.h
@@ -0,0 +1,198 @@
+#ifndef __ARCH_BFIN_TERMBITS_H__
+#define __ARCH_BFIN_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;	/* input mode flags */
+	tcflag_t c_oflag;	/* output mode flags */
+	tcflag_t c_cflag;	/* control mode flags */
+	tcflag_t c_lflag;	/* local mode flags */
+	cc_t c_line;		/* line discipline */
+	cc_t c_cc[NCCS];	/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;               /* input mode flags */
+	tcflag_t c_oflag;               /* output mode flags */
+	tcflag_t c_cflag;               /* control mode flags */
+	tcflag_t c_lflag;               /* local mode flags */
+	cc_t c_line;                    /* line discipline */
+	cc_t c_cc[NCCS];                /* control characters */
+	speed_t c_ispeed;               /* input speed */
+	speed_t c_ospeed;               /* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;               /* input mode flags */
+	tcflag_t c_oflag;               /* output mode flags */
+	tcflag_t c_cflag;               /* control mode flags */
+	tcflag_t c_lflag;               /* local mode flags */
+	cc_t c_line;                    /* line discipline */
+	cc_t c_cc[NCCS];                /* control characters */
+	speed_t c_ispeed;               /* input speed */
+	speed_t c_ospeed;               /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define BOTHER	0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR	  010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000	/* flow control */
+
+#define IBSHIFT	16	/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif				/* __ARCH_BFIN_TERMBITS_H__ */
diff --git a/arch/blackfin/include/asm/termios.h b/arch/blackfin/include/asm/termios.h
new file mode 100644
index 00000000000..d50d063c605
--- /dev/null
+++ b/arch/blackfin/include/asm/termios.h
@@ -0,0 +1,94 @@
+#ifndef __BFIN_TERMIOS_H__
+#define __BFIN_TERMIOS_H__
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;	/* input mode flags */
+	unsigned short c_oflag;	/* output mode flags */
+	unsigned short c_cflag;	/* control mode flags */
+	unsigned short c_lflag;	/* local mode flags */
+	unsigned char c_line;	/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+	copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+	copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+	copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+	copy_to_user(u, k, sizeof(struct termios))
+
+#endif				/* __KERNEL__ */
+
+#endif				/* __BFIN_TERMIOS_H__ */
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
new file mode 100644
index 00000000000..642769329d1
--- /dev/null
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -0,0 +1,135 @@
+/*
+ * File:         include/asm-blackfin/thread_info.h
+ * Based on:     include/asm-m68knommu/thread_info.h
+ * Author:       LG Soft India
+ *               Copyright (C) 2004-2005 Analog Devices Inc.
+ * Created:      Tue Sep 21 2004
+ * Description:  Blackfin low-level thread information
+ * Modified:
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+#include <asm/entry.h>
+#include <asm/l1layout.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+
+/* Thread Align Mask to reach to the top of the stack
+ * for any process
+ */
+#define ALIGN_PAGE_MASK         0xffffe000
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192	/* 2 pages */
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_segment_t;
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+
+struct thread_info {
+	struct task_struct *task;	/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long flags;	/* low level flags */
+	int cpu;		/* cpu we're on */
+	int preempt_count;	/* 0 => preemptable, <0 => BUG */
+	mm_segment_t addr_limit;	/* address limit */
+	struct restart_block restart_block;
+	struct l1_scratch_task_info l1_task_info;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count  = 1,                    \
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* Given a task stack pointer, you can find its corresponding
+ * thread_info structure just by masking it to the THREAD_SIZE
+ * boundary (currently 8K as you can see above).
+ */
+__attribute_const__
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+      __asm__("%0 = sp;": "=&d"(ti):
+	);
+	return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
+}
+
+#endif				/* __ASSEMBLY__ */
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK		0
+#define TI_EXECDOMAIN	4
+#define TI_FLAGS	8
+#define TI_CPU		12
+#define TI_PREEMPT	16
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE              4
+#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_FREEZE              6       /* is freezing for suspend */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_FREEZE             (1<<TIF_FREEZE)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _ASM_THREAD_INFO_H */
diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h
new file mode 100644
index 00000000000..ddc43ce3853
--- /dev/null
+++ b/arch/blackfin/include/asm/time.h
@@ -0,0 +1,40 @@
+/*
+ * asm-blackfin/time.h:
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ASM_BLACKFIN_TIME_H
+#define _ASM_BLACKFIN_TIME_H
+
+/*
+ * The way that the Blackfin core timer works is:
+ *  - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE)
+ *  - Every time TSCALE ticks, a 32bit is counted down (TCOUNT)
+ *
+ * If you take the fastest clock (1ns, or 1GHz to make the math work easier)
+ *    10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter
+ *    (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need
+ *    to use TSCALE, and program it to zero (which is pass CCLK through).
+ *    If you feel like using it, try to keep HZ * TIMESCALE to some
+ *    value that divides easy (like power of 2).
+ */
+
+#ifndef CONFIG_CPU_FREQ
+#define TIME_SCALE 1
+#define __bfin_cycles_off (0)
+#define __bfin_cycles_mod (0)
+#else
+/*
+ * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
+ * Whenever we change the Core Clock frequency changes we immediately
+ * adjust the Core Timer Presale Register. This way we don't lose time.
+ */
+#define TIME_SCALE 4
+extern unsigned long long __bfin_cycles_off;
+extern unsigned int __bfin_cycles_mod;
+#endif
+
+#endif
diff --git a/arch/blackfin/include/asm/timex.h b/arch/blackfin/include/asm/timex.h
new file mode 100644
index 00000000000..22b0806161b
--- /dev/null
+++ b/arch/blackfin/include/asm/timex.h
@@ -0,0 +1,23 @@
+/*
+ * asm-blackfin/timex.h: cpu cycles!
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ASM_BLACKFIN_TIMEX_H
+#define _ASM_BLACKFIN_TIMEX_H
+
+#define CLOCK_TICK_RATE	1000000	/* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	unsigned long tmp, tmp2;
+	__asm__("%0 = cycles; %1 = cycles2;" : "=d"(tmp), "=d"(tmp2));
+	return tmp | ((cycles_t)tmp2 << 32);
+}
+
+#endif
diff --git a/arch/blackfin/include/asm/tlb.h b/arch/blackfin/include/asm/tlb.h
new file mode 100644
index 00000000000..89a12ee916d
--- /dev/null
+++ b/arch/blackfin/include/asm/tlb.h
@@ -0,0 +1,16 @@
+#ifndef _BLACKFIN_TLB_H
+#define _BLACKFIN_TLB_H
+
+#define tlb_start_vma(tlb, vma)	do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)	do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb)		flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif				/* _BLACKFIN_TLB_H */
diff --git a/arch/blackfin/include/asm/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h
new file mode 100644
index 00000000000..277b400924b
--- /dev/null
+++ b/arch/blackfin/include/asm/tlbflush.h
@@ -0,0 +1,56 @@
+#ifndef _BLACKFIN_TLBFLUSH_H
+#define _BLACKFIN_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long addr)
+{
+	BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+				   unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+	BUG();
+}
+
+#endif
diff --git a/arch/blackfin/include/asm/topology.h b/arch/blackfin/include/asm/topology.h
new file mode 100644
index 00000000000..acee2398789
--- /dev/null
+++ b/arch/blackfin/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BLACKFIN_TOPOLOGY_H
+#define _ASM_BLACKFIN_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif				/* _ASM_BLACKFIN_TOPOLOGY_H */
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
new file mode 100644
index 00000000000..312b596b973
--- /dev/null
+++ b/arch/blackfin/include/asm/trace.h
@@ -0,0 +1,94 @@
+/*
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _BLACKFIN_TRACE_
+#define _BLACKFIN_TRACE_
+
+/* Normally, we use ON, but you can't turn on software expansion until
+ * interrupts subsystem is ready
+ */
+
+#define BFIN_TRACE_INIT ((CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION << 4) | 0x03)
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+#define BFIN_TRACE_ON   (BFIN_TRACE_INIT | (CONFIG_DEBUG_BFIN_HWTRACE_EXPAND << 2))
+#else
+#define BFIN_TRACE_ON   (BFIN_TRACE_INIT)
+#endif
+
+#ifndef __ASSEMBLY__
+extern unsigned long trace_buff_offset;
+extern unsigned long software_trace_buff[];
+
+/* Trace Macros for C files */
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+
+#define trace_buffer_save(x) \
+	do { \
+		(x) = bfin_read_TBUFCTL(); \
+		bfin_write_TBUFCTL((x) & ~TBUFEN); \
+	} while (0)
+
+#define trace_buffer_restore(x) \
+	do { \
+		bfin_write_TBUFCTL((x));        \
+	} while (0)
+#else /* DEBUG_BFIN_HWTRACE_ON */
+
+#define trace_buffer_save(x)
+#define trace_buffer_restore(x)
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
+#else
+/* Trace Macros for Assembly files */
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+
+#define trace_buffer_stop(preg, dreg)	\
+	preg.L = LO(TBUFCTL);		\
+	preg.H = HI(TBUFCTL);		\
+	dreg = 0x1;			\
+	[preg] = dreg;
+
+#define trace_buffer_init(preg, dreg) \
+	preg.L = LO(TBUFCTL);         \
+	preg.H = HI(TBUFCTL);         \
+	dreg = BFIN_TRACE_INIT;       \
+	[preg] = dreg;
+
+#define trace_buffer_save(preg, dreg) \
+	preg.L = LO(TBUFCTL); \
+	preg.H = HI(TBUFCTL); \
+	dreg = [preg]; \
+	[--sp] = dreg; \
+	dreg = 0x1; \
+	[preg] = dreg;
+
+#define trace_buffer_restore(preg, dreg) \
+	preg.L = LO(TBUFCTL); \
+	preg.H = HI(TBUFCTL); \
+	dreg = [sp++]; \
+	[preg] = dreg;
+
+#else /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
+#define trace_buffer_stop(preg, dreg)
+#define trace_buffer_init(preg, dreg)
+#define trace_buffer_save(preg, dreg)
+#define trace_buffer_restore(preg, dreg)
+
+#endif /* CONFIG_DEBUG_BFIN_HWTRACE_ON */
+
+#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+# define DEBUG_HWTRACE_SAVE(preg, dreg)    trace_buffer_save(preg, dreg)
+# define DEBUG_HWTRACE_RESTORE(preg, dreg) trace_buffer_restore(preg, dreg)
+#else
+# define DEBUG_HWTRACE_SAVE(preg, dreg)
+# define DEBUG_HWTRACE_RESTORE(preg, dreg)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif				/* _BLACKFIN_TRACE_ */
diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h
new file mode 100644
index 00000000000..f0e5f940d9c
--- /dev/null
+++ b/arch/blackfin/include/asm/traps.h
@@ -0,0 +1,131 @@
+/*
+ *  linux/include/asm/traps.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ *  Lineo, Inc    Jul 2001    Tony Kou
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _BFIN_TRAPS_H
+#define _BFIN_TRAPS_H
+
+#define VEC_SYS		(0)
+#define VEC_EXCPT01	(1)
+#define VEC_EXCPT02	(2)
+#define VEC_EXCPT03	(3)
+#define VEC_EXCPT04	(4)
+#define VEC_EXCPT05	(5)
+#define VEC_EXCPT06	(6)
+#define VEC_EXCPT07	(7)
+#define VEC_EXCPT08	(8)
+#define VEC_EXCPT09	(9)
+#define VEC_EXCPT10	(10)
+#define VEC_EXCPT11	(11)
+#define VEC_EXCPT12	(12)
+#define VEC_EXCPT13	(13)
+#define VEC_EXCPT14	(14)
+#define VEC_EXCPT15	(15)
+#define VEC_STEP	(16)
+#define VEC_OVFLOW	(17)
+#define VEC_UNDEF_I	(33)
+#define VEC_ILGAL_I	(34)
+#define VEC_CPLB_VL	(35)
+#define VEC_MISALI_D	(36)
+#define VEC_UNCOV	(37)
+#define VEC_CPLB_M	(38)
+#define VEC_CPLB_MHIT	(39)
+#define VEC_WATCH	(40)
+#define VEC_ISTRU_VL	(41)	/*ADSP-BF535 only (MH) */
+#define VEC_MISALI_I	(42)
+#define VEC_CPLB_I_VL	(43)
+#define VEC_CPLB_I_M	(44)
+#define VEC_CPLB_I_MHIT	(45)
+#define VEC_ILL_RES	(46)	/* including unvalid supervisor mode insn */
+/* The hardware reserves (63) for future use - we use it to tell our
+ * normal exception handling code we have a hardware error
+ */
+#define VEC_HWERR	(63)
+
+#ifndef __ASSEMBLY__
+
+#define HWC_x2(level) \
+	"System MMR Error\n" \
+	level " - An error occurred due to an invalid access to an System MMR location\n" \
+	level "   Possible reason: a 32-bit register is accessed with a 16-bit instruction\n" \
+	level "   or a 16-bit register is accessed with a 32-bit instruction.\n"
+#define HWC_x3(level) \
+	"External Memory Addressing Error\n"
+#define HWC_x12(level) \
+	"Performance Monitor Overflow\n"
+#define HWC_x18(level) \
+	"RAISE 5 instruction\n" \
+	level "    Software issued a RAISE 5 instruction to invoke the Hardware\n"
+#define HWC_default(level) \
+	 "Reserved\n"
+#define EXC_0x03(level) \
+	"Application stack overflow\n" \
+	level " - Please increase the stack size of the application using elf2flt -s option,\n" \
+	level "   and/or reduce the stack use of the application.\n"
+#define EXC_0x10(level) \
+	"Single step\n" \
+	level " - When the processor is in single step mode, every instruction\n" \
+	level "   generates an exception. Primarily used for debugging.\n"
+#define EXC_0x11(level) \
+	"Exception caused by a trace buffer full condition\n" \
+	level " - The processor takes this exception when the trace\n" \
+	level "   buffer overflows (only when enabled by the Trace Unit Control register).\n"
+#define EXC_0x21(level) \
+	"Undefined instruction\n" \
+	level " - May be used to emulate instructions that are not defined for\n" \
+	level "   a particular processor implementation.\n"
+#define EXC_0x22(level) \
+	"Illegal instruction combination\n" \
+	level " - See section for multi-issue rules in the ADSP-BF53x Blackfin\n" \
+	level "   Processor Instruction Set Reference.\n"
+#define EXC_0x23(level) \
+	"Data access CPLB protection violation\n" \
+	level " - Attempted read or write to Supervisor resource,\n" \
+	level "   or illegal data memory access. \n"
+#define EXC_0x24(level) \
+	"Data access misaligned address violation\n" \
+	level " - Attempted misaligned data memory or data cache access.\n"
+#define EXC_0x25(level) \
+	"Unrecoverable event\n" \
+	level " - For example, an exception generated while processing a previous exception.\n"
+#define EXC_0x26(level) \
+	"Data access CPLB miss\n" \
+	level " - Used by the MMU to signal a CPLB miss on a data access.\n"
+#define EXC_0x27(level) \
+	"Data access multiple CPLB hits\n" \
+	level " - More than one CPLB entry matches data fetch address.\n"
+#define EXC_0x28(level) \
+	"Program Sequencer Exception caused by an emulation watchpoint match\n" \
+	level " - There is a watchpoint match, and one of the EMUSW\n" \
+	level "   bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
+#define EXC_0x2A(level) \
+	"Instruction fetch misaligned address violation\n" \
+	level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \
+	level "   exception, the return address provided in RETX is the destination address which is\n" \
+	level "   misaligned, rather than the address of the offending instruction.\n"
+#define EXC_0x2B(level) \
+	"CPLB protection violation\n" \
+	level " - Illegal instruction fetch access (memory protection violation).\n"
+#define EXC_0x2C(level) \
+	"Instruction fetch CPLB miss\n" \
+	level " - CPLB miss on an instruction fetch.\n"
+#define EXC_0x2D(level) \
+	"Instruction fetch multiple CPLB hits\n" \
+	level " - More than one CPLB entry matches instruction fetch address.\n"
+#define EXC_0x2E(level) \
+	"Illegal use of supervisor resource\n" \
+	level " - Attempted to use a Supervisor register or instruction from User mode.\n" \
+	level "   Supervisor resources are registers and instructions that are reserved\n" \
+	level "   for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n" \
+	level "   only instructions.\n"
+
+#endif				/* __ASSEMBLY__ */
+#endif				/* _BFIN_TRAPS_H */
diff --git a/arch/blackfin/include/asm/types.h b/arch/blackfin/include/asm/types.h
new file mode 100644
index 00000000000..8441cbc2bf9
--- /dev/null
+++ b/arch/blackfin/include/asm/types.h
@@ -0,0 +1,36 @@
+#ifndef _BFIN_TYPES_H
+#define _BFIN_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif				/* __ASSEMBLY__ */
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif				/* __ASSEMBLY__ */
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _BFIN_TYPES_H */
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
new file mode 100644
index 00000000000..d928b809905
--- /dev/null
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -0,0 +1,271 @@
+/* Changes made by Lineo Inc.    May 2001
+ *
+ * Based on: include/asm-m68knommu/uaccess.h
+ */
+
+#ifndef __BLACKFIN_UACCESS_H
+#define __BLACKFIN_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+#ifdef CONFIG_ACCESS_CHECK
+# include <asm/bfin-global.h>
+#endif
+
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+}
+
+#define segment_eq(a,b) ((a) == (b))
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size))
+
+static inline int is_in_rom(unsigned long addr)
+{
+	/*
+	 * What we are really trying to do is determine if addr is
+	 * in an allocated kernel memory region. If not then assume
+	 * we cannot free it or otherwise de-allocate it. Ideally
+	 * we could restrict this to really being in a ROM or flash,
+	 * but that would need to be done on a board by board basis,
+	 * not globally.
+	 */
+	if ((addr < _ramstart) || (addr >= _ramend))
+		return (1);
+
+	/* Default case, not in ROM */
+	return (0);
+}
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ */
+
+#ifndef CONFIG_ACCESS_CHECK
+static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; }
+#else
+#ifdef CONFIG_ACCESS_OK_L1
+extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text));
+#else
+extern int _access_ok(unsigned long addr, unsigned long size);
+#endif
+#endif
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x,p)						\
+	({							\
+		int _err = 0;					\
+		typeof(*(p)) _x = (x);				\
+		typeof(*(p)) *_p = (p);				\
+		if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\
+			_err = -EFAULT;				\
+		}						\
+		else {						\
+		switch (sizeof (*(_p))) {			\
+		case 1:						\
+			__put_user_asm(_x, _p, B);		\
+			break;					\
+		case 2:						\
+			__put_user_asm(_x, _p, W);		\
+			break;					\
+		case 4:						\
+			__put_user_asm(_x, _p,  );		\
+			break;					\
+		case 8: {					\
+			long _xl, _xh;				\
+			_xl = ((long *)&_x)[0];			\
+			_xh = ((long *)&_x)[1];			\
+			__put_user_asm(_xl, ((long *)_p)+0, );	\
+			__put_user_asm(_xh, ((long *)_p)+1, );	\
+		} break;					\
+		default:					\
+			_err = __put_user_bad();		\
+			break;					\
+		}						\
+		}						\
+		_err;						\
+	})
+
+#define __put_user(x,p) put_user(x,p)
+static inline int bad_user_access_length(void)
+{
+	panic("bad_user_access_length");
+	return -1;
+}
+
+#define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\
+                           __FILE__, __LINE__, __func__),\
+                           bad_user_access_length(), (-EFAULT))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define __put_user_asm(x,p,bhw)				\
+	__asm__ (#bhw"[%1] = %0;\n\t"			\
+		 : /* no outputs */			\
+		 :"d" (x),"a" (__ptr(p)) : "memory")
+
+#define get_user(x,p)							\
+	({								\
+		int _err = 0;						\
+		typeof(*(p)) *_p = (p);					\
+		if (!access_ok(VERIFY_READ, _p, sizeof(*(_p)))) {	\
+			_err = -EFAULT;					\
+		}							\
+		else {							\
+		switch (sizeof(*(_p))) {				\
+		case 1:							\
+			__get_user_asm(x, _p, B,(Z));			\
+			break;						\
+		case 2:							\
+			__get_user_asm(x, _p, W,(Z));			\
+			break;						\
+		case 4:							\
+			__get_user_asm(x, _p,  , );			\
+			break;						\
+		case 8: {						\
+			unsigned long _xl, _xh;				\
+			__get_user_asm(_xl, ((unsigned long *)_p)+0,  , ); \
+			__get_user_asm(_xh, ((unsigned long *)_p)+1,  , ); \
+			((unsigned long *)&x)[0] = _xl;			\
+			((unsigned long *)&x)[1] = _xh;			\
+		} break;						\
+		default:						\
+			x = 0;						\
+			printk(KERN_INFO "get_user_bad: %s:%d %s\n",    \
+			       __FILE__, __LINE__, __func__);	\
+			_err = __get_user_bad();			\
+			break;						\
+		}							\
+		}							\
+		_err;							\
+	})
+
+#define __get_user(x,p) get_user(x,p)
+
+#define __get_user_bad() (bad_user_access_length(), (-EFAULT))
+
+#define __get_user_asm(x,p,bhw,option)				\
+	{							\
+		unsigned long _tmp;				\
+		__asm__ ("%0 =" #bhw "[%1]"#option";\n\t"	\
+			 : "=d" (_tmp)				\
+			 : "a" (__ptr(p)));			\
+		(x) = (__typeof__(*(p))) _tmp;			\
+	}
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\
+				                 return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\
+                                                   return retval; })
+
+static inline long copy_from_user(void *to,
+				  const void __user * from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		memcpy(to, from, n);
+	else
+		return n;
+	return 0;
+}
+
+static inline long copy_to_user(void *to,
+				const void __user * from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		memcpy(to, from, n);
+	else
+		return n;
+	return 0;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long strncpy_from_user(char *dst,
+                                     const char *src, long count)
+{
+	char *tmp;
+	if (!access_ok(VERIFY_READ, src, 1))
+		return -EFAULT;
+	strncpy(dst, src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--) ;
+	return (tmp - dst);
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+	return (strlen(src) + 1);
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long __clear_user(void *to, unsigned long n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
+#define clear_user(to, n) __clear_user(to, n)
+
+#endif				/* _BLACKFIN_UACCESS_H */
diff --git a/arch/blackfin/include/asm/ucontext.h b/arch/blackfin/include/asm/ucontext.h
new file mode 100644
index 00000000000..4a4e3856beb
--- /dev/null
+++ b/arch/blackfin/include/asm/ucontext.h
@@ -0,0 +1,17 @@
+/** Changes made by Tony Kou   Lineo Inc.    May 2001
+ *
+ *  Based on: include/m68knommu/ucontext.h
+ */
+
+#ifndef _BLACKFIN_UCONTEXT_H
+#define _BLACKFIN_UCONTEXT_H
+
+struct ucontext {
+	unsigned long uc_flags;	/* the others are necessary */
+	struct ucontext *uc_link;
+	stack_t uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif				/* _BLACKFIN_UCONTEXT_H */
diff --git a/arch/blackfin/include/asm/unaligned.h b/arch/blackfin/include/asm/unaligned.h
new file mode 100644
index 00000000000..fd8a1d63494
--- /dev/null
+++ b/arch/blackfin/include/asm/unaligned.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_BLACKFIN_UNALIGNED_H
+#define _ASM_BLACKFIN_UNALIGNED_H
+
+#include <linux/unaligned/le_struct.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+
+#endif /* _ASM_BLACKFIN_UNALIGNED_H */
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
new file mode 100644
index 00000000000..1e57b636e0b
--- /dev/null
+++ b/arch/blackfin/include/asm/unistd.h
@@ -0,0 +1,438 @@
+#ifndef __ASM_BFIN_UNISTD_H
+#define __ASM_BFIN_UNISTD_H
+/*
+ * This file contains the system call numbers.
+ */
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+				/* 7 __NR_waitpid obsolete */
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+				/* 17 __NR_break obsolete */
+				/* 18 __NR_oldstat obsolete */
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+				/* 22 __NR_umount obsolete */
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+				/* 28 __NR_oldfstat obsolete */
+#define __NR_pause		 29
+				/* 30 __NR_utime obsolete */
+				/* 31 __NR_stty obsolete */
+				/* 32 __NR_gtty obsolete */
+#define __NR_access		 33
+#define __NR_nice		 34
+				/* 35 __NR_ftime obsolete */
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+				/* 44 __NR_prof obsolete */
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+				/* 48 __NR_signal obsolete */
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+				/* 53 __NR_lock obsolete */
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+				/* 56 __NR_mpx obsolete */
+#define __NR_setpgid		 57
+				/* 58 __NR_ulimit obsolete */
+				/* 59 __NR_oldolduname obsolete */
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+				/* 67 __NR_sigaction obsolete */
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+				/* 72 __NR_sigsuspend obsolete */
+				/* 73 __NR_sigpending obsolete */
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+				/* 76 __NR_old_getrlimit obsolete */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+				/* 82 __NR_select obsolete */
+#define __NR_symlink		 83
+				/* 84 __NR_oldlstat obsolete */
+#define __NR_readlink		 85
+				/* 86 __NR_uselib obsolete */
+				/* 87 __NR_swapon obsolete */
+#define __NR_reboot		 88
+				/* 89 __NR_readdir obsolete */
+				/* 90 __NR_mmap obsolete */
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+				/* 98 __NR_profil obsolete */
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+				/* 101 __NR_ioperm */
+				/* 102 __NR_socketcall obsolete */
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+				/* 109 __NR_olduname obsolete */
+				/* 110 __NR_iopl obsolete */
+#define __NR_vhangup		111
+				/* 112 __NR_idle obsolete */
+				/* 113 __NR_vm86old */
+#define __NR_wait4		114
+				/* 115 __NR_swapoff obsolete */
+#define __NR_sysinfo		116
+				/* 117 __NR_ipc oboslete */
+#define __NR_fsync		118
+				/* 119 __NR_sigreturn obsolete */
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+				/* 123 __NR_modify_ldt obsolete */
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+				/* 126 __NR_sigprocmask obsolete */
+				/* 127 __NR_create_module obsolete */
+#define __NR_init_module	128
+#define __NR_delete_module	129
+				/* 130 __NR_get_kernel_syms obsolete */
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+				/* 135 was sysfs */
+#define __NR_personality	136
+				/* 137 __NR_afs_syscall */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+				/* 142 __NR__newselect obsolete */
+#define __NR_flock		143
+				/* 144 __NR_msync obsolete */
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+				/* 150 __NR_mlock */
+				/* 151 __NR_munlock */
+				/* 152 __NR_mlockall */
+				/* 153 __NR_munlockall */
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+				/* 166 __NR_vm86 */
+				/* 167 __NR_query_module */
+				/* 168 __NR_poll */
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread		180
+#define __NR_pwrite		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+				/* 188 __NR_getpmsg */
+				/* 189 __NR_putpmsg */
+#define __NR_vfork		190
+#define __NR_getrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+				/* 218 __NR_mincore */
+				/* 219 __NR_madvise */
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+				/* 222 reserved for TUX */
+				/* 223 reserved for TUX */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+				/* 243 __NR_set_thread_area */
+				/* 244 __NR_get_thread_area */
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+				/* 250 __NR_alloc_hugepages */
+				/* 251 __NR_free_hugepages */
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie     253
+#define __NR_bfin_spinlock      254
+
+#define __NR_epoll_create	255
+#define __NR_epoll_ctl		256
+#define __NR_epoll_wait		257
+				/* 258 __NR_remap_file_pages */
+#define __NR_set_tid_address	259
+#define __NR_timer_create	260
+#define __NR_timer_settime	261
+#define __NR_timer_gettime	262
+#define __NR_timer_getoverrun	263
+#define __NR_timer_delete	264
+#define __NR_clock_settime	265
+#define __NR_clock_gettime	266
+#define __NR_clock_getres	267
+#define __NR_clock_nanosleep	268
+#define __NR_statfs64		269
+#define __NR_fstatfs64		270
+#define __NR_tgkill		271
+#define __NR_utimes		272
+#define __NR_fadvise64_64	273
+				/* 274 __NR_vserver */
+				/* 275 __NR_mbind */
+				/* 276 __NR_get_mempolicy */
+				/* 277 __NR_set_mempolicy */
+#define __NR_mq_open 		278
+#define __NR_mq_unlink		279
+#define __NR_mq_timedsend	280
+#define __NR_mq_timedreceive	281
+#define __NR_mq_notify		282
+#define __NR_mq_getsetattr	283
+#define __NR_kexec_load		284
+#define __NR_waitid		285
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+				/* 294 __NR_migrate_pages */
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+
+/* Blackfin private syscalls */
+#define __NR_sram_alloc		311
+#define __NR_sram_free		312
+#define __NR_dma_memcpy		313
+
+/* socket syscalls */
+#define __NR_accept		314
+#define __NR_bind		315
+#define __NR_connect		316
+#define __NR_getpeername	317
+#define __NR_getsockname	318
+#define __NR_getsockopt		319
+#define __NR_listen		320
+#define __NR_recv		321
+#define __NR_recvfrom		322
+#define __NR_recvmsg		323
+#define __NR_send		324
+#define __NR_sendmsg		325
+#define __NR_sendto		326
+#define __NR_setsockopt		327
+#define __NR_shutdown		328
+#define __NR_socket		329
+#define __NR_socketpair		330
+
+/* sysv ipc syscalls */
+#define __NR_semctl		331
+#define __NR_semget		332
+#define __NR_semop		333
+#define __NR_msgctl		334
+#define __NR_msgget		335
+#define __NR_msgrcv		336
+#define __NR_msgsnd		337
+#define __NR_shmat		338
+#define __NR_shmctl		339
+#define __NR_shmdt		340
+#define __NR_shmget		341
+
+#define __NR_splice		342
+#define __NR_sync_file_range	343
+#define __NR_tee		344
+#define __NR_vmsplice		345
+
+#define __NR_epoll_pwait	346
+#define __NR_utimensat		347
+#define __NR_signalfd		348
+#define __NR_timerfd_create	349
+#define __NR_eventfd		350
+#define __NR_pread64		351
+#define __NR_pwrite64		352
+#define __NR_fadvise64		353
+#define __NR_set_robust_list	354
+#define __NR_get_robust_list	355
+#define __NR_fallocate		356
+#define __NR_semtimedop		357
+#define __NR_timerfd_settime	358
+#define __NR_timerfd_gettime	359
+#define __NR_signalfd4		360
+#define __NR_eventfd2		361
+#define __NR_epoll_create1	362
+#define __NR_dup3		363
+#define __NR_pipe2		364
+#define __NR_inotify_init1	365
+
+#define __NR_syscall		366
+#define NR_syscalls		__NR_syscall
+
+/* Old optional stuff no one actually uses */
+#define __IGNORE_sysfs
+#define __IGNORE_uselib
+
+/* Implement the newer interfaces */
+#define __IGNORE_mmap
+#define __IGNORE_poll
+#define __IGNORE_select
+#define __IGNORE_utime
+
+/* Not relevant on no-mmu */
+#define __IGNORE_swapon
+#define __IGNORE_swapoff
+#define __IGNORE_msync
+#define __IGNORE_mlock
+#define __IGNORE_munlock
+#define __IGNORE_mlockall
+#define __IGNORE_munlockall
+#define __IGNORE_mincore
+#define __IGNORE_madvise
+#define __IGNORE_remap_file_pages
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+#define __IGNORE_getcpu
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t_" #x "\n\t.set\t_" #x ",_sys_ni_syscall");
+
+#endif	/* __KERNEL__ */
+
+#endif				/* __ASM_BFIN_UNISTD_H */
diff --git a/arch/blackfin/include/asm/user.h b/arch/blackfin/include/asm/user.h
new file mode 100644
index 00000000000..afe6a0e1f7c
--- /dev/null
+++ b/arch/blackfin/include/asm/user.h
@@ -0,0 +1,89 @@
+#ifndef _BFIN_USER_H
+#define _BFIN_USER_H
+
+/* Changes by Tony Kou   Lineo, Inc.  July, 2001
+ *
+ * Based include/asm-m68knommu/user.h
+ *
+ */
+
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+struct user_bfinfp_struct {
+};
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+   is still the layout used by user (the new pt_regs doesn't have
+   all registers). */
+struct user_regs_struct {
+	long r0, r1, r2, r3, r4, r5, r6, r7;
+	long p0, p1, p2, p3, p4, p5, usp, fp;
+	long i0, i1, i2, i3;
+	long l0, l1, l2, l3;
+	long b0, b1, b2, b3;
+	long m0, m1, m2, m3;
+	long a0w, a1w;
+	long a0x, a1x;
+	unsigned long rets;
+	unsigned long astat;
+	unsigned long pc;
+	unsigned long orig_p0;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+
+	struct user_regs_struct regs;	/* Where the registers are actually stored */
+
+/* The rest of this junk is to help gdb figure out what goes where */
+	unsigned long int u_tsize;	/* Text segment size (pages). */
+	unsigned long int u_dsize;	/* Data segment size (pages). */
+	unsigned long int u_ssize;	/* Stack segment size (pages). */
+	unsigned long start_code;	/* Starting virtual address of text. */
+	unsigned long start_stack;	/* Starting virtual address of stack area.
+					   This is actually the bottom of the stack,
+					   the top of the stack is always found in the
+					   esp register.  */
+	long int signal;	/* Signal that caused the core dump. */
+	int reserved;		/* No longer used */
+	unsigned long u_ar0;
+	/* Used by gdb to help find the values for */
+	/* the registers. */
+	unsigned long magic;	/* To uniquely identify a core file */
+	char u_comm[32];	/* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 6140cd69c78..606adc78aa8 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -18,6 +18,5 @@ endif
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_BFIN_DMA_5XX)           += bfin_dma_5xx.o
-obj-$(CONFIG_DUAL_CORE_TEST_MODULE)  += dualcore_test.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index d54f19085f3..93229b3d6e3 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -472,6 +472,40 @@ unsigned long get_dma_curr_addr(unsigned int channel)
 }
 EXPORT_SYMBOL(get_dma_curr_addr);
 
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void)
+{
+	int i;
+
+#ifdef CONFIG_BF561	/* IMDMA channels doesn't have a PERIPHERAL_MAP */
+	for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) {
+#else
+	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
+#endif
+		if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
+			printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
+			return -EBUSY;
+		}
+
+		dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
+	}
+
+	return 0;
+}
+
+void blackfin_dma_resume(void)
+{
+	int i;
+
+#ifdef CONFIG_BF561	/* IMDMA channels doesn't have a PERIPHERAL_MAP */
+	for (i = 0; i <= CH_MEM_STREAM3_SRC; i++)
+#else
+	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++)
+#endif
+		dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+}
+#endif
+
 static void *__dma_memcpy(void *dest, const void *src, size_t size)
 {
 	int direction;	/* 1 - address decrease, 0 - address increase */
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index b6d89d1644c..ecbd141e0ef 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -186,7 +186,10 @@ static struct str_ident {
 	char name[RESOURCE_LABEL_SIZE];
 } str_ident[MAX_RESOURCES];
 
-#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
+#if defined(CONFIG_PM)
+#if defined(CONFIG_BF54x)
+static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
+#else
 static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
 static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -206,7 +209,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INT
 #ifdef BF561_FAMILY
 static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
 #endif
-
+#endif
 #endif /* CONFIG_PM */
 
 #if defined(BF548_FAMILY)
@@ -667,7 +670,7 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
 	return 0;
 }
 
-u32 bfin_pm_setup(void)
+u32 bfin_pm_standby_setup(void)
 {
 	u16 bank, mask, i, gpio;
 
@@ -679,7 +682,7 @@ u32 bfin_pm_setup(void)
 		gpio_bankb[bank]->maskb = 0;
 
 		if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
 			gpio_bank_saved[bank].fer   = *port_fer[bank];
 #endif
 			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
@@ -715,7 +718,7 @@ u32 bfin_pm_setup(void)
 	return 0;
 }
 
-void bfin_pm_restore(void)
+void bfin_pm_standby_restore(void)
 {
 	u16 bank, mask, i;
 
@@ -724,7 +727,7 @@ void bfin_pm_restore(void)
 		bank = gpio_bank(i);
 
 		if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
 			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
 #endif
 			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
@@ -743,8 +746,111 @@ void bfin_pm_restore(void)
 	AWA_DUMMY_READ(maskb);
 }
 
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+			gpio_bank_saved[bank].fer   = *port_fer[bank];
+#ifdef BF527_FAMILY
+			gpio_bank_saved[bank].mux   = *port_mux[bank];
+#else
+			if (bank == 0)
+				gpio_bank_saved[bank].mux   = bfin_read_PORT_MUX();
+#endif
+#endif
+			gpio_bank_saved[bank].data  = gpio_bankb[bank]->data;
+			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
+			gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
+			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
+			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
+			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+			gpio_bank_saved[bank].maska  = gpio_bankb[bank]->maska;
+	}
+
+	AWA_DUMMY_READ(maska);
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#ifdef BF527_FAMILY
+			*port_mux[bank] = gpio_bank_saved[bank].mux;
+#else
+			if (bank == 0)
+				bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+#endif
+			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
+#endif
+			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
+			gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
+			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
+			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
+			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+
+			gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
+							| gpio_bank_saved[bank].dir;
+
+			gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+	}
+	AWA_DUMMY_READ(maska);
+}
+
+
 #endif
 #else /* BF548_FAMILY */
+#ifdef CONFIG_PM
+
+u32 bfin_pm_standby_setup(void)
+{
+	return 0;
+}
+
+void bfin_pm_standby_restore(void)
+{
+
+}
+
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+			gpio_bank_saved[bank].fer  = gpio_array[bank]->port_fer;
+			gpio_bank_saved[bank].mux  = gpio_array[bank]->port_mux;
+			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+			gpio_bank_saved[bank].inen  = gpio_array[bank]->port_inen;
+			gpio_bank_saved[bank].dir   = gpio_array[bank]->port_dir_set;
+	}
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			bank = gpio_bank(i);
+
+			gpio_array[bank]->port_mux  = gpio_bank_saved[bank].mux;
+			gpio_array[bank]->port_fer  = gpio_bank_saved[bank].fer;
+			gpio_array[bank]->port_inen  = gpio_bank_saved[bank].inen;
+			gpio_array[bank]->port_dir_set   = gpio_bank_saved[bank].dir;
+			gpio_array[bank]->port_set = gpio_bank_saved[bank].data
+							| gpio_bank_saved[bank].dir;
+	}
+}
+#endif
 
 unsigned short get_gpio_dir(unsigned gpio)
 {
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
index 9eecfa40318..a8b712a24c5 100644
--- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
@@ -25,7 +25,7 @@
 #include <asm/cplbinit.h>
 
 #if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
 {
 	unsigned long ctrl;
 	int i;
@@ -43,7 +43,7 @@ void bfin_icache_init(void)
 #endif
 
 #if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
 {
 	unsigned long ctrl;
 	int i;
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
index 8a18399f607..bd0831592c2 100644
--- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
@@ -25,7 +25,7 @@
 #include <asm/cplbinit.h>
 
 #if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
 {
 	unsigned long *table = icplb_table;
 	unsigned long ctrl;
@@ -47,7 +47,7 @@ void bfin_icache_init(void)
 #endif
 
 #if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
 {
 	unsigned long *table = dcplb_table;
 	unsigned long ctrl;
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
index 2788532de72..ecbabc0a1fe 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
+++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
@@ -125,6 +125,6 @@ ENTRY(__cplb_hdr)
 	SP += -12;
 	call _panic_cplb_error;
 	SP += 12;
-	JUMP _handle_bad_cplb;
+	JUMP.L _handle_bad_cplb;
 
 ENDPROC(__cplb_hdr)
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 6be0c50122e..728f708d398 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -26,11 +26,7 @@
 #include <asm/cplb.h>
 #include <asm/cplbinit.h>
 
-#ifdef CONFIG_MAX_MEM_SIZE
-# define CPLB_MEM CONFIG_MAX_MEM_SIZE
-#else
-# define CPLB_MEM CONFIG_MEM_SIZE
-#endif
+#define CPLB_MEM CONFIG_MAX_MEM_SIZE
 
 /*
 * Number of required data CPLB switchtable entries
@@ -168,17 +164,13 @@ static struct cplb_desc cplb_data[] = {
 		.name = "Asynchronous Memory Banks",
 	},
 	{
-#ifdef L2_START
 		.start = L2_START,
 		.end = L2_START + L2_LENGTH,
 		.psize = SIZE_1M,
 		.attr = SWITCH_T | I_CPLB | D_CPLB,
 		.i_conf = L2_MEMORY,
 		.d_conf = L2_MEMORY,
-		.valid = 1,
-#else
-		.valid = 0,
-#endif
+		.valid = (L2_LENGTH > 0),
 		.name = "L2 Memory",
 	},
 	{
diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c
deleted file mode 100644
index 0fcba74840b..00000000000
--- a/arch/blackfin/kernel/dualcore_test.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * File:         arch/blackfin/kernel/dualcore_test.c
- * Based on:
- * Author:
- *
- * Created:
- * Description:  Small test code for CoreB on a BF561
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-static int *testarg = (int *)0xfeb00000;
-
-static int test_init(void)
-{
-	*testarg = 1;
-	printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
-	       *testarg, testarg);
-	return 0;
-}
-
-static void test_exit(void)
-{
-	printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg);
-}
-
-module_init(test_init);
-module_exit(test_exit);
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 65f4e67a65c..faea88ebb2e 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -32,7 +32,7 @@
 #include <asm/errno.h>
 #include <asm/asm-offsets.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 #ifdef CONFIG_EXCPT_IRQ_SYSC_L1
 .section .l1.text
@@ -64,6 +64,11 @@ ENDPROC(_ret_from_fork)
 
 ENTRY(_sys_fork)
 	r0 = -EINVAL;
+#if (ANOMALY_05000371)
+	nop;
+	nop;
+	nop;
+#endif
 	rts;
 ENDPROC(_sys_fork)
 
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index a9c15515bfd..a1f9641a642 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -203,6 +203,8 @@ struct hw_breakpoint {
 
 int kgdb_arch_init(void)
 {
+	debugger_step = 0;
+
 	kgdb_remove_all_hw_break();
 	return 0;
 }
@@ -368,6 +370,7 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 	char *ptr;
 	int newPC;
 	int wp_status;
+	int i;
 
 	switch (remcom_in_buffer[0]) {
 	case 'c':
@@ -392,7 +395,18 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
 			linux_regs->syscfg |= 0x1;
-			debugger_step = 1;
+			debugger_step = linux_regs->ipend;
+			debugger_step >>= 6;
+			for (i = 10; i > 0; i--, debugger_step >>= 1)
+				if (debugger_step & 1)
+					break;
+			/* i indicate event priority of current stopped instruction
+			 * user space instruction is 0, IVG15 is 1, IVTMR is 10.
+			 * debugger_step > 0 means in single step mode
+			 */
+			debugger_step = i + 1;
+		} else {
+			debugger_step = 0;
 		}
 
 		wp_status = bfin_read_WPSTAT();
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 14a42848f37..e1bebc80a5b 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -173,7 +173,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 	for (s = sechdrs; s < sechdrs_end; ++s) {
 		if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
@@ -188,7 +188,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		}
 		if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
@@ -203,7 +203,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		}
 		if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
 		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
@@ -242,6 +242,51 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			s->sh_flags &= ~SHF_ALLOC;
 			s->sh_addr = (unsigned long)dest;
 		}
+		if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) ||
+		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.text_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+				       "module %s: L2 SRAM allocation failed\n",
+				       mod->name);
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
+		if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) ||
+		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.data_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+					"module %s: L2 SRAM allocation failed\n",
+					mod->name);
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
+		if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
+		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.bss_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+					"module %s: L2 SRAM allocation failed\n",
+					mod->name);
+				return -1;
+			}
+			memset(dest, 0, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
 	}
 	return 0;
 }
@@ -411,9 +456,10 @@ module_finalize(const Elf_Ehdr * hdr,
 			continue;
 
 		if ((sechdrs[i].sh_type == SHT_RELA) &&
-		    ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
+		    ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) ||
+		    (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
 		    ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
-			 (hdr->e_flags & FLG_CODE_IN_L1)))) {
+			(hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) {
 			apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
 					   symindex, i, mod);
 		}
@@ -423,14 +469,12 @@ module_finalize(const Elf_Ehdr * hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-	if (mod->arch.text_l1)
-		l1_inst_sram_free((void *)mod->arch.text_l1);
-	if (mod->arch.data_a_l1)
-		l1_data_sram_free((void *)mod->arch.data_a_l1);
-	if (mod->arch.bss_a_l1)
-		l1_data_sram_free((void *)mod->arch.bss_a_l1);
-	if (mod->arch.data_b_l1)
-		l1_data_B_sram_free((void *)mod->arch.data_b_l1);
-	if (mod->arch.bss_b_l1)
-		l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
+	l1_inst_sram_free(mod->arch.text_l1);
+	l1_data_A_sram_free(mod->arch.data_a_l1);
+	l1_data_A_sram_free(mod->arch.bss_a_l1);
+	l1_data_B_sram_free(mod->arch.data_b_l1);
+	l1_data_B_sram_free(mod->arch.bss_b_l1);
+	l2_sram_free(mod->arch.text_l2);
+	l2_sram_free(mod->arch.data_l2);
+	l2_sram_free(mod->arch.bss_l2);
 }
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 53c2cd25544..77800dd83e5 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -105,7 +105,7 @@ void cpu_idle(void)
 #endif
 		if (!idle)
 			idle = default_idle;
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index f51ab088098..bf1a51d8e60 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -220,6 +220,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				copied = sizeof(tmp);
 			} else
 #endif
+#if L1_DATA_A_LENGTH != 0
+			if (addr + add >= L1_DATA_A_START
+			    && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+				copied = sizeof(tmp);
+			} else
+#endif
+#if L1_DATA_B_LENGTH != 0
+			if (addr + add >= L1_DATA_B_START
+			    && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+				copied = sizeof(tmp);
+			} else
+#endif
 			if (addr + add >= FIXED_CODE_START
 			    && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
 				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
@@ -290,6 +304,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				copied = sizeof(data);
 			} else
 #endif
+#if L1_DATA_A_LENGTH != 0
+			if (addr + add >= L1_DATA_A_START
+			    && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy((void *)(addr + add), &data, sizeof(data));
+				copied = sizeof(data);
+			} else
+#endif
+#if L1_DATA_B_LENGTH != 0
+			if (addr + add >= L1_DATA_B_START
+			    && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy((void *)(addr + add), &data, sizeof(data));
+				copied = sizeof(data);
+			} else
+#endif
 			if (addr + add >= FIXED_CODE_START
 			    && addr + add + sizeof(data) <= FIXED_CODE_END) {
 				memcpy((void *)(addr + add), &data, sizeof(data));
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8efea004aec..7a82d10b4eb 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -52,6 +52,7 @@ EXPORT_SYMBOL(mtd_size);
 #endif
 
 char __initdata command_line[COMMAND_LINE_SIZE];
+unsigned int __initdata *__retx;
 
 /* boot memmap, for parsing "memmap=" */
 #define BFIN_MEMMAP_MAX		128 /* number of entries in bfin_memmap */
@@ -104,6 +105,7 @@ void __init bf53x_relocate_l1_mem(void)
 	unsigned long l1_code_length;
 	unsigned long l1_data_a_length;
 	unsigned long l1_data_b_length;
+	unsigned long l2_length;
 
 	l1_code_length = _etext_l1 - _stext_l1;
 	if (l1_code_length > L1_CODE_LENGTH)
@@ -129,6 +131,15 @@ void __init bf53x_relocate_l1_mem(void)
 	/* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
 	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
+
+	if (L2_LENGTH != 0) {
+		l2_length = _ebss_l2 - _stext_l2;
+		if (l2_length > L2_LENGTH)
+			panic("L2 SRAM Overflow\n");
+
+		/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+		dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+	}
 }
 
 /* add_memory_region to memmap */
@@ -664,11 +675,8 @@ static __init void setup_bootmem_allocator(void)
 })
 static inline int __init get_mem_size(void)
 {
-#ifdef CONFIG_MEM_SIZE
-	return CONFIG_MEM_SIZE;
-#else
-# if defined(EBIU_SDBCTL)
-#  if defined(BF561_FAMILY)
+#if defined(EBIU_SDBCTL)
+# if defined(BF561_FAMILY)
 	int ret = 0;
 	u32 sdbctl = bfin_read_EBIU_SDBCTL();
 	ret += EBSZ_TO_MEG(sdbctl >>  0);
@@ -676,10 +684,10 @@ static inline int __init get_mem_size(void)
 	ret += EBSZ_TO_MEG(sdbctl >> 16);
 	ret += EBSZ_TO_MEG(sdbctl >> 24);
 	return ret;
-#  else
+# else
 	return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
-#  endif
-# elif defined(EBIU_DDRCTL1)
+# endif
+#elif defined(EBIU_DDRCTL1)
 	u32 ddrctl = bfin_read_EBIU_DDRCTL1();
 	int ret = 0;
 	switch (ddrctl & 0xc0000) {
@@ -693,8 +701,9 @@ static inline int __init get_mem_size(void)
 		case DEVWD_8:  ret *= 2;
 		case DEVWD_16: break;
 	}
+	if ((ddrctl & 0xc000) == 0x4000)
+		ret *= 2;
 	return ret;
-# endif
 #endif
 	BUG();
 }
@@ -730,6 +739,16 @@ void __init setup_arch(char **cmdline_p)
 
 	memory_setup();
 
+	/* Initialize Async memory banks */
+	bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
+	bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
+	bfin_write_EBIU_AMGCTL(AMGCTLVAL);
+#ifdef CONFIG_EBIU_MBSCTLVAL
+	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
+	bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
+	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
+#endif
+
 	cclk = get_cclk();
 	sclk = get_sclk();
 
@@ -763,8 +782,15 @@ void __init setup_arch(char **cmdline_p)
 
 	_bfin_swrst = bfin_read_SWRST();
 
+	/* If we double fault, reset the system - otherwise we hang forever */
+	bfin_write_SWRST(DOUBLE_FAULT);
+
 	if (_bfin_swrst & RESET_DOUBLE)
-		printk(KERN_INFO "Recovering from Double Fault event\n");
+		/*
+		 * don't decode the address, since you don't know if this
+		 * kernel's symbol map is the same as the crashing kernel
+		 */
+		printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
 	else if (_bfin_swrst & RESET_WDOG)
 		printk(KERN_INFO "Recovering from Watchdog event\n");
 	else if (_bfin_swrst & RESET_SOFTWARE)
@@ -842,38 +868,55 @@ static int __init topology_init(void)
 
 subsys_initcall(topology_init);
 
+/* Get the voltage input multiplier */
+static u_long cached_vco_pll_ctl, cached_vco;
 static u_long get_vco(void)
 {
 	u_long msel;
-	u_long vco;
 
-	msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
+	u_long pll_ctl = bfin_read_PLL_CTL();
+	if (pll_ctl == cached_vco_pll_ctl)
+		return cached_vco;
+	else
+		cached_vco_pll_ctl = pll_ctl;
+
+	msel = (pll_ctl >> 9) & 0x3F;
 	if (0 == msel)
 		msel = 64;
 
-	vco = CONFIG_CLKIN_HZ;
-	vco >>= (1 & bfin_read_PLL_CTL());	/* DF bit */
-	vco = msel * vco;
-	return vco;
+	cached_vco = CONFIG_CLKIN_HZ;
+	cached_vco >>= (1 & pll_ctl);	/* DF bit */
+	cached_vco *= msel;
+	return cached_vco;
 }
 
 /* Get the Core clock */
+static u_long cached_cclk_pll_div, cached_cclk;
 u_long get_cclk(void)
 {
 	u_long csel, ssel;
+
 	if (bfin_read_PLL_STAT() & 0x1)
 		return CONFIG_CLKIN_HZ;
 
 	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_cclk_pll_div)
+		return cached_cclk;
+	else
+		cached_cclk_pll_div = ssel;
+
 	csel = ((ssel >> 4) & 0x03);
 	ssel &= 0xf;
 	if (ssel && ssel < (1 << csel))	/* SCLK > CCLK */
-		return get_vco() / ssel;
-	return get_vco() >> csel;
+		cached_cclk = get_vco() / ssel;
+	else
+		cached_cclk = get_vco() >> csel;
+	return cached_cclk;
 }
 EXPORT_SYMBOL(get_cclk);
 
 /* Get the System clock */
+static u_long cached_sclk_pll_div, cached_sclk;
 u_long get_sclk(void)
 {
 	u_long ssel;
@@ -881,13 +924,20 @@ u_long get_sclk(void)
 	if (bfin_read_PLL_STAT() & 0x1)
 		return CONFIG_CLKIN_HZ;
 
-	ssel = (bfin_read_PLL_DIV() & 0xf);
+	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_sclk_pll_div)
+		return cached_sclk;
+	else
+		cached_sclk_pll_div = ssel;
+
+	ssel &= 0xf;
 	if (0 == ssel) {
 		printk(KERN_WARNING "Invalid System Clock\n");
 		ssel = 1;
 	}
 
-	return get_vco() / ssel;
+	cached_sclk = get_vco() / ssel;
+	return cached_sclk;
 }
 EXPORT_SYMBOL(get_sclk);
 
@@ -916,7 +966,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	uint32_t revid;
 
 	u_long cclk = 0, sclk = 0;
-	u_int dcache_size = 0, dsup_banks = 0;
+	u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
 
 	cpu = CPU;
 	mmu = "none";
@@ -985,12 +1035,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 	/* Is it turned on? */
-	if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)))
+	if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
 		dcache_size = 0;
 
+	if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
+		icache_size = 0;
+
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
 		"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
-		BFIN_ICACHESIZE / 1024, dcache_size,
+		icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
 		"wb"
 #elif defined CONFIG_BFIN_WT
@@ -1000,14 +1053,18 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, "%s\n", cache);
 
-	seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
-		   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	if (icache_size)
+		seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
+			   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	else
+		seq_printf(m, "icache setup\t: off\n");
+
 	seq_printf(m,
 		   "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
 		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
 		   BFIN_DLINES);
 #ifdef CONFIG_BFIN_ICACHE_LOCK
-	switch (read_iloc()) {
+	switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) {
 	case WAY0_L:
 		seq_printf(m, "Way0 Locked-Down\n");
 		break;
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index f061f518162..9a9d5083acf 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -69,8 +69,6 @@ void __init trap_init(void)
 
 unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
-int kstack_depth_to_print = 48;
-
 static void decode_address(char *buf, unsigned long address)
 {
 	struct vm_list_struct *vml;
@@ -163,6 +161,9 @@ static void decode_address(char *buf, unsigned long address)
 				if (!in_atomic)
 					mmput(mm);
 
+				if (!strlen(buf))
+					sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name);
+
 				goto done;
 			}
 
@@ -173,7 +174,7 @@ static void decode_address(char *buf, unsigned long address)
 	}
 
 	/* we were unable to find this address anywhere */
-	sprintf(buf, "<0x%p> /* unknown address */", (void *)address);
+	sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address);
 
 done:
 	write_unlock_irqrestore(&tasklist_lock, flags);
@@ -494,7 +495,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	BUG_ON(sig == 0);
 
 	if (sig != SIGTRAP) {
-		unsigned long stack;
+		unsigned long *stack;
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -508,14 +509,23 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		else
 #endif
 			dump_bfin_trace_buffer();
-		show_stack(current, &stack);
+
 		if (oops_in_progress) {
+			/* Dump the current kernel stack */
+			printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			show_stack(current, NULL);
+
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
 			printk(KERN_EMERG "Please turn on "
 			       "CONFIG_ACCESS_CHECK\n");
 #endif
 			panic("Kernel exception");
+		} else {
+			/* Dump the user space stack */
+			stack = (unsigned long *)rdusp();
+			printk(KERN_NOTICE "Userspace Stack\n");
+			show_stack(NULL, stack);
 		}
 	}
 
@@ -532,11 +542,114 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
 
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on sucess, false on bad address
+ */
+bool get_instruction(unsigned short *val, unsigned short *address)
+{
+
+	unsigned long addr;
+
+	addr = (unsigned long)address;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	/* Check that things do not wrap around */
+	if (addr > (addr + 2))
+		return false;
+
+	/*
+	 * Since we are in exception context, we need to do a little address checking
+	 * We need to make sure we are only accessing valid memory, and
+	 * we don't read something in the async space that can hang forever
+	 */
+	if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
+#if L2_LENGTH != 0
+	    (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
+#endif
+	    (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
+#if L1_DATA_A_LENGTH != 0
+	    (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
+#endif
+#if L1_DATA_B_LENGTH != 0
+	    (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
+#endif
+	    (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
+	    (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
+	       addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
+	       addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
+	       addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
+	      addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
+		*val = *address;
+		return true;
+	}
+
+#if L1_CODE_LENGTH != 0
+	if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
+		dma_memcpy(val, address, 2);
+		return true;
+	}
+#endif
+
+
+	return false;
+}
+
+/* 
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * These are the normal instructions which cause change of flow, which
+ * would be at the source of the trace buffer
+ */
+void decode_instruction(unsigned short *address)
+{
+	unsigned short opcode;
+
+	if (get_instruction(&opcode, address)) {
+		if (opcode == 0x0010)
+			printk("RTS");
+		else if (opcode == 0x0011)
+			printk("RTI");
+		else if (opcode == 0x0012)
+			printk("RTX");
+		else if (opcode >= 0x0050 && opcode <= 0x0057)
+			printk("JUMP (P%i)", opcode & 7);
+		else if (opcode >= 0x0060 && opcode <= 0x0067)
+			printk("CALL (P%i)", opcode & 7);
+		else if (opcode >= 0x0070 && opcode <= 0x0077)
+			printk("CALL (PC+P%i)", opcode & 7);
+		else if (opcode >= 0x0080 && opcode <= 0x0087)
+			printk("JUMP (PC+P%i)", opcode & 7);
+		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
+			printk("IF !CC JUMP");
+		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
+			printk("IF CC JUMP");
+		else if (opcode >= 0x2000 && opcode <= 0x2fff)
+			printk("JUMP.S");
+		else if (opcode >= 0xe080 && opcode <= 0xe0ff)
+			printk("LSETUP");
+		else if (opcode >= 0xe200 && opcode <= 0xe2ff)
+			printk("JUMP.L");
+		else if (opcode >= 0xe300 && opcode <= 0xe3ff)
+			printk("CALL pcrel");
+		else
+			printk("0x%04x", opcode);
+	}
+
+}
+
 void dump_bfin_trace_buffer(void)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int tflags, i = 0;
 	char buf[150];
+	unsigned short *addr;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
 	int j, index;
 #endif
@@ -545,18 +658,25 @@ void dump_bfin_trace_buffer(void)
 
 	printk(KERN_NOTICE "Hardware Trace:\n");
 
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
 	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
 		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
 			decode_address(buf, (unsigned long)bfin_read_TBUF());
 			printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-			decode_address(buf, (unsigned long)bfin_read_TBUF());
-			printk(KERN_NOTICE "     Source : %s\n", buf);
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			printk(KERN_NOTICE "     Source : %s ", buf);
+			decode_instruction(addr);
+			printk("\n");
 		}
 	}
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
 	if (trace_buff_offset)
-		index = trace_buff_offset/4 - 1;
+		index = trace_buff_offset / 4;
 	else
 		index = EXPAND_LEN;
 
@@ -568,7 +688,9 @@ void dump_bfin_trace_buffer(void)
 		if (index < 0 )
 			index = EXPAND_LEN;
 		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "     Source : %s\n", buf);
+		printk(KERN_NOTICE "     Source : %s ", buf);
+		decode_instruction((unsigned short *)software_trace_buff[index]);
+		printk("\n");
 		index -= 1;
 		if (index < 0)
 			index = EXPAND_LEN;
@@ -582,59 +704,151 @@ void dump_bfin_trace_buffer(void)
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
-static void show_trace(struct task_struct *tsk, unsigned long *sp)
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+bool is_bfin_call(unsigned short *addr)
 {
-	unsigned long addr;
+	unsigned short opcode = 0, *ins_addr;
+	ins_addr = (unsigned short *)addr;
 
-	printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		/*
-		 * If the address is either in the text segment of the
-		 * kernel, or in the region which contains vmalloc'ed
-		 * memory, it *may* be the address of a calling
-		 * routine; if so, print it so that someone tracing
-		 * down the cause of the crash will be able to figure
-		 * out the call path that was taken.
-		 */
-		if (kernel_text_address(addr))
-			print_ip_sym(addr);
-	}
+	if (!get_instruction(&opcode, ins_addr))
+		return false;
 
-	printk(KERN_NOTICE "\n");
-}
+	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+	    (opcode >= 0x0070 && opcode <= 0x0077))
+		return true;
+
+	ins_addr--;
+	if (!get_instruction(&opcode, ins_addr))
+		return false;
+
+	if (opcode >= 0xE300 && opcode <= 0xE3FF)
+		return true;
 
+	return false;
+
+}
 void show_stack(struct task_struct *task, unsigned long *stack)
 {
-	unsigned long *endstack, addr;
-	int i;
+	unsigned int *addr, *endstack, *fp = 0, *frame;
+	unsigned short *ins_addr;
+	char buf[150];
+	unsigned int i, j, ret_addr, frame_no = 0;
 
-	/* Cannot call dump_bfin_trace_buffer() here as show_stack() is
-	 * called externally in some places in the kernel.
+	/*
+	 * If we have been passed a specific stack, use that one otherwise
+	 *    if we have been passed a task structure, use that, otherwise
+	 *    use the stack of where the variable "stack" exists
 	 */
 
-	if (!stack) {
-		if (task)
+	if (stack == NULL) {
+		if (task) {
+			/* We know this is a kernel stack, so this is the start/end */
 			stack = (unsigned long *)task->thread.ksp;
-		else
+			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+		} else {
+			/* print out the existing stack info */
 			stack = (unsigned long *)&stack;
+			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+		}
+	} else
+		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+	decode_address(buf, (unsigned int)stack);
+	printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+	addr = (unsigned int *)((unsigned int)stack & ~0x3F);
+
+	/* First thing is to look for a frame pointer */
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		addr < endstack; addr++, i++) {
+		if (*addr & 0x1)
+			continue;
+		ins_addr = (unsigned short *)*addr;
+		ins_addr--;
+		if (is_bfin_call(ins_addr))
+			fp = addr - 1;
+
+		if (fp) {
+			/* Let's check to see if it is a frame pointer */
+			while (fp >= (addr - 1) && fp < endstack && fp)
+				fp = (unsigned int *)*fp;
+			if (fp == 0 || fp == endstack) {
+				fp = addr - 1;
+				break;
+			}
+			fp = 0;
+		}
 	}
+	if (fp) {
+		frame = fp;
+		printk(" FP: (0x%p)\n", fp);
+	} else
+		frame = 0;
 
-	addr = (unsigned long)stack;
-	endstack = (unsigned long *)PAGE_ALIGN(addr);
+	/*
+	 * Now that we think we know where things are, we
+	 * walk the stack again, this time printing things out
+	 * incase there is no frame pointer, we still look for
+	 * valid return addresses
+	 */
 
-	printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (stack + 1 > endstack)
-			break;
-		if (i % 8 == 0)
-			printk("\n" KERN_NOTICE "       ");
-		printk(" %08lx", *stack++);
+	/* First time print out data, next time, print out symbols */
+	for (j = 0; j <= 1; j++) {
+		if (j)
+			printk(KERN_NOTICE "Return addresses in stack:\n");
+		else
+			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+		fp = frame;
+		frame_no = 0;
+
+		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		     addr <= endstack; addr++, i++) {
+
+			ret_addr = 0;
+			if (!j && i % 8 == 0)
+				printk("\n" KERN_NOTICE "%p:",addr);
+
+			/* if it is an odd address, or zero, just skip it */
+			if (*addr & 0x1 || !*addr)
+				goto print;
+
+			ins_addr = (unsigned short *)*addr;
+
+			/* Go back one instruction, and see if it is a CALL */
+			ins_addr--;
+			ret_addr = is_bfin_call(ins_addr);
+ print:
+			if (!j && stack == (unsigned long *)addr)
+				printk("[%08x]", *addr);
+			else if (ret_addr)
+				if (j) {
+					decode_address(buf, (unsigned int)*addr);
+					if (frame == addr) {
+						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+						continue;
+					}
+					printk(KERN_NOTICE "    address : %s\n", buf);
+				} else
+					printk("<%08x>", *addr);
+			else if (fp == addr) {
+				if (j)
+					frame = addr+1;
+				else
+					printk("(%08x)", *addr);
+
+				fp = (unsigned int *)*addr;
+				frame_no++;
+
+			} else if (!j)
+				printk(" %08x ", *addr);
+		}
+		if (!j)
+			printk("\n");
 	}
-	printk("\n");
 
-	show_trace(task, stack);
 }
 
 void dump_stack(void)
@@ -715,19 +929,9 @@ void dump_bfin_mem(struct pt_regs *fp)
 		if (!((unsigned long)addr & 0xF))
 			printk("\n" KERN_NOTICE "0x%p: ", addr);
 
-		if (get_user(val, addr)) {
-			if (addr >= (unsigned short *)L1_CODE_START &&
-			    addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) {
-				dma_memcpy(&val, addr, sizeof(val));
-				sprintf(buf, "%04x", val);
-			} else if (addr >= (unsigned short *)FIXED_CODE_START &&
-				addr <= (unsigned short *)memory_start) {
-				val = bfin_read16(addr);
-				sprintf(buf, "%04x", val);
-			} else {
+		if (get_instruction(&val, addr)) {
 				val = 0;
 				sprintf(buf, "????");
-			}
 		} else
 			sprintf(buf, "%04x", val);
 
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 3ecc64cab3b..7d12c6692a6 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -83,6 +83,7 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
 		*(.l1.bss.B)
 #endif
+		. = ALIGN(4);
 		___bss_stop = .;
 	}
 
@@ -101,6 +102,11 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
 		*(.l1.data.B)
 #endif
+#if !L2_LENGTH
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+		*(.l2.data)
+#endif
 
 		DATA_DATA
 		*(.data.*)
@@ -182,14 +188,13 @@ SECTIONS
 		*(.l1.data)
 		__edata_l1 = .;
 
-		. = ALIGN(4);
-		__sbss_l1 = .;
-		*(.l1.bss)
-
 		. = ALIGN(32);
 		*(.data_l1.cacheline_aligned)
 
 		. = ALIGN(4);
+		__sbss_l1 = .;
+		*(.l1.bss)
+		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
 
@@ -203,11 +208,35 @@ SECTIONS
 		. = ALIGN(4);
 		__sbss_b_l1 = .;
 		*(.l1.bss.B)
-
 		. = ALIGN(4);
 		__ebss_b_l1 = .;
 	}
 
+	__l2_lma_start = .;
+
+	.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
+	{
+		. = ALIGN(4);
+		__stext_l2 = .;
+		*(.l2.text)
+		. = ALIGN(4);
+		__etext_l2 = .;
+
+		. = ALIGN(4);
+		__sdata_l2 = .;
+		*(.l2.data)
+		__edata_l2 = .;
+
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+
+		. = ALIGN(4);
+		__sbss_l2 = .;
+		*(.l2.bss)
+		. = ALIGN(4);
+		__ebss_l2 = .;
+	}
+
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
 	 */
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index eba2343b1b5..d60554dce87 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -33,7 +33,28 @@
 
 .align 2
 
+/*
+ * Reads on the Blackfin are speculative. In Blackfin terms, this means they
+ * can be interrupted at any time (even after they have been issued on to the
+ * external bus), and re-issued after the interrupt occurs.
+ *
+ * If a FIFO is sitting on the end of the read, it will see two reads,
+ * when the core only sees one. The FIFO receives the read which is cancelled,
+ * and not delivered to the core.
+ *
+ * To solve this, interrupts are turned off before reads occur to I/O space.
+ * There are 3 versions of all these functions
+ *  - turns interrupts off every read (higher overhead, but lower latency)
+ *  - turns interrupts off every loop (low overhead, but longer latency)
+ *  - DMA version, which do not suffer from this issue. DMA versions have
+ *      different name (prefixed by dma_ ), and are located in
+ *      ../kernel/bfin_dma_5xx.c
+ * Using the dma related functions are recommended for transfering large
+ * buffers in/out of FIFOs.
+ */
+
 ENTRY(_insl)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -46,9 +67,26 @@ ENTRY(_insl)
 .Llong_loop_e: 	NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = [P0];
+	[P1++] = R0;
+.Llong_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insl)
 
 ENTRY(_insw)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -61,9 +99,26 @@ ENTRY(_insw)
 .Lword_loop_e: 	NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = W[P0];
+	W[P1++] = R0;
+.Lword_loop_e:
+	STI R3;
+	RTS;
+
+#endif
 ENDPROC(_insw)
 
 ENTRY(_insw_8)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -78,9 +133,29 @@ ENTRY(_insw_8)
 .Lword8_loop_e: NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = W[P0];
+	B[P1++] = R0;
+	R0 = R0 >> 8;
+	B[P1++] = R0;
+	NOP;
+.Lword8_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insw_8)
 
 ENTRY(_insb)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -93,9 +168,26 @@ ENTRY(_insb)
 .Lbyte_loop_e:  NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;        /* P0 = port */
+	P1 = R1;        /* P1 = address */
+	P2 = R2;        /* P2 = count */
+	SSYNC;
+	LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = B[P0];
+	B[P1++] = R0;
+.Lbyte_loop_e:
+	STI R3;
+
+	RTS;
+#endif
 ENDPROC(_insb)
 
 ENTRY(_insl_16)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
 	P0 = R0;	/* P0 = port */
 	cli R3;
 	P1 = R1;	/* P1 = address */
@@ -110,4 +202,21 @@ ENTRY(_insl_16)
 .Llong16_loop_e:  NOP;
 	sti R3;
 	RTS;
+#else
+	P0 = R0;	/* P0 = port */
+	P1 = R1;	/* P1 = address */
+	P2 = R2;	/* P2 = count */
+	SSYNC;
+	LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2;
+.Llong16_loop_s:
+	CLI R3;
+	NOP; NOP; NOP;
+	R0 = [P0];
+	W[P1++] = R0;
+	R0 = R0 >> 16;
+	W[P1++] = R0;
+.Llong16_loop_e:
+	STI R3;
+	RTS;
+#endif
 ENDPROC(_insl_16)
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index 6a570ad0374..8bf9e58f014 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -9,4 +9,9 @@ config BFIN527_EZKIT
 	help
 	  BF527-EZKIT-LITE board support.
 
+config BFIN527_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF527"
+	help
+	  CM-BF527 support for EVAL- and DEV-Board.
+
 endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 7277d35ef11..7ba7d256bbb 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
new file mode 100644
index 00000000000..d22bc777371
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -0,0 +1,965 @@
+/*
+ * File:         arch/blackfin/mach-bf527/boards/cm-bf527.c
+ * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/etherdevice.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/sl811.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#include <linux/usb/musb.h>
+#endif
+#include <asm/cplb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM-BF527";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#define ISP1761_BASE       0x203C0000
+#define ISP1761_IRQ        IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+	[0] = {
+		.name	= "isp1761-regs",
+		.start  = ISP1761_BASE + 0x00000000,
+		.end    = ISP1761_BASE + 0x000fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = ISP1761_IRQ,
+		.end    = ISP1761_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_isp1761_device = {
+	.name           = "isp1761",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+	.resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+	&bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+	return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+	platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.multipoint	= 0,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "linux kernel(nand)",
+		.offset = 0,
+		.size = 4 * SIZE_1M,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.page_size = NFC_PG_SIZE_256,
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = 6, /* Card Detect PF6 */
+		.end = 6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x203FB800,
+		.end	= 0x203FB800 + 8,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+	{
+		.start = 0x20340000,
+		.end = 0x20340000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20340004,
+		.end = 0x20340004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_USB_SL811_BFIN_IRQ,
+		.end = CONFIG_USB_SL811_BFIN_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+	.potpg = 10,
+	.power = 250,       /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+	.port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+	.name = "sl811-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &sl811_priv,
+	},
+	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
+	.resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20360000,
+		.end = 0x20360000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20360004,
+		.end = 0x20360004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+	.ctl_reg	= 0x4, /* send zero */
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+	.cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836-spi",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+	{
+		.modalias = "ad9960-spi",
+		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &ad9960_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_PBX)
+	{
+		.modalias = "fxs-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J11_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "fxo-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J19_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.controller_data = &spi_wm8731_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+	.name = "bfin-adv7393",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+		.type = "pcf8574_lcd",
+	},
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.type = "pcf8574_keypad",
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+	&bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+	&sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+	&musb_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+	&dm9000_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	&bfin_fb_adv7393_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init stamp_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_gpio_reset_spi0_ssel1();
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 5958eecefcf..762f754c06c 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -177,15 +176,15 @@ static struct platform_device bf52x_t350mcqb_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -217,12 +216,12 @@ static struct platform_device ezkit_flash_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
 	},
@@ -323,10 +322,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB800 + 4,
+		.end	= 0x203FB800 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
@@ -455,12 +459,12 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -820,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -991,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -1017,10 +980,6 @@ static int __init stamp_init(void)
 
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
index 57bdb3ba2fe..28c48619120 100644
--- a/arch/blackfin/mach-bf527/head.S
+++ b/arch/blackfin/mach-bf527/head.S
@@ -30,295 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-
-#if defined(CONFIG_BF527)
-	p0.h = hi(EMAC_SYSTAT);
-	p0.l = lo(EMAC_SYSTAT);
-	R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
-	R0.l = 0xFFFF;
-	[P0] = R0;
-	SSYNC;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(UART1_LCR);
-	p0.l = lo(UART1_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(UART1_DLL);
-	p0.l = lo(UART1_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(UART1_DLH);
-	p0.l = lo(UART1_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(UART1_GCTL);
-	p0.l = lo(UART1_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -398,12 +116,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
@@ -426,13 +138,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR0);
-	p0.l = lo(SIC_IWR0);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
new file mode 100644
index 00000000000..b7b166f4f06
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -0,0 +1,104 @@
+/*
+ * File: include/asm-blackfin/mach-bf527/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ *  - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* New Feature: EMAC TX DMA Word Alignment */
+#define ANOMALY_05000285 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (1)
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (1)
+/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
+#define ANOMALY_05000341 (1)
+/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
+#define ANOMALY_05000342 (1)
+/* USB Calibration Value Is Not Initialized */
+#define ANOMALY_05000346 (1)
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
+#define ANOMALY_05000347 (1)
+/* Security Features Are Not Functional */
+#define ANOMALY_05000348 (__SILICON_REVISION__ < 1)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (1)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000364 (__SILICON_REVISION__ > 0)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* New Feature: Higher Default CCLK Rate */
+#define ANOMALY_05000368 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* Authentication Fails To Initiate */
+#define ANOMALY_05000376 (__SILICON_REVISION__ > 0)
+/* Data Read From L3 Memory by USB DMA May be Corrupted */
+#define ANOMALY_05000380 (1)
+/* USB Full-speed Mode not Fully Tested */
+#define ANOMALY_05000381 (1)
+/* New Feature: Boot from OTP Memory */
+#define ANOMALY_05000385 (1)
+/* New Feature: bfrom_SysControl() Routine */
+#define ANOMALY_05000386 (1)
+/* New Feature: Programmable Preboot Settings */
+#define ANOMALY_05000387 (1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (1)
+/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (1)
+/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (1)
+/* New Feature: Log Buffer Functionality */
+#define ANOMALY_05000394 (1)
+/* New Feature: Hook Routine Functionality */
+#define ANOMALY_05000395 (1)
+/* New Feature: Header Indirect Bit */
+#define ANOMALY_05000396 (1)
+/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */
+#define ANOMALY_05000397 (1)
+/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */
+#define ANOMALY_05000398 (1)
+/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */
+#define ANOMALY_05000399 (1)
+/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
+#define ANOMALY_05000401 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000363 (0)
+
+#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
new file mode 100644
index 00000000000..056eb4b9cd2
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -0,0 +1,127 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/bf527.h
+ * Based on:	include/asm-blackfin/mach-bf537/bf537.h
+ * Author:	Michael Hennerich (michael.hennerich@analog.com)
+ *
+ * Created:
+ * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __MACH_BF527_H__
+#define __MACH_BF527_H__
+
+#define SUPPORTED_REVID 2
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR	0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#ifdef CONFIG_BF527
+#define CPU "BF527"
+#endif
+#ifdef CONFIG_BF525
+#define CPU "BF525"
+#endif
+#ifdef CONFIG_BF522
+#define CPU "BF522"
+#endif
+#ifndef CPU
+#define	CPU "UNKNOWN"
+#define CPUID 0x0
+#endif
+
+#endif				/* __MACH_BF527_H__  */
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
new file mode 100644
index 00000000000..2526b6ed6fa
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -0,0 +1,195 @@
+/*
+ * file:        include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	blackfin serial driver head file
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
+#define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_THR), v)
+#define UART_PUT_DLL(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_DLL), v)
+#define UART_PUT_IER(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_IER), v)
+#define UART_SET_IER(uart, v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart, v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
+#define UART_PUT_DLH(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_DLH), v)
+#define UART_PUT_LCR(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_LCR), v)
+#define UART_PUT_GCTL(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL), v)
+
+#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+# define CONFIG_SERIAL_BFIN_CTSRTS
+
+# ifndef CONFIG_UART0_CTS_PIN
+#  define CONFIG_UART0_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART0_RTS_PIN
+#  define CONFIG_UART0_RTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_CTS_PIN
+#  define CONFIG_UART1_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_RTS_PIN
+#  define CONFIG_UART1_RTS_PIN -1
+# endif
+#endif
+/*
+ * The pin configuration is different from schematic
+ */
+struct bfin_serial_port {
+	struct uart_port port;
+	unsigned int old_status;
+	unsigned int lsr;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	int tx_done;
+	int tx_count;
+	struct circ_buf rx_dma_buf;
+	struct timer_list rx_dma_timer;
+	int rx_dma_nrows;
+	unsigned int tx_dma_channel;
+	unsigned int rx_dma_channel;
+	struct work_struct tx_dma_workqueue;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	struct timer_list cts_timer;
+	int cts_pin;
+	int rts_pin;
+#endif
+};
+
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+	uart->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+	uart->lsr = 0;
+	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
+struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+struct bfin_serial_res {
+	unsigned long uart_base_addr;
+	int uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	unsigned int uart_tx_dma_channel;
+	unsigned int uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	int uart_cts_pin;
+	int uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+	 0xFFC00400,
+	 IRQ_UART0_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	 CH_UART0_TX,
+	 CH_UART0_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	 CONFIG_UART0_CTS_PIN,
+	 CONFIG_UART0_RTS_PIN,
+#endif
+	 },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+	 0xFFC02000,
+	 IRQ_UART1_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	 CH_UART1_TX,
+	 CH_UART1_RX,
+#endif
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	 CONFIG_UART1_CTS_PIN,
+	 CONFIG_UART1_RTS_PIN,
+#endif
+	 },
+#endif
+};
+
+int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+
+#define DRIVER_NAME "bfin-uart"
+
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	peripheral_request(P_UART1_TX, DRIVER_NAME);
+	peripheral_request(P_UART1_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	if (uart->cts_pin >= 0) {
+		gpio_request(uart->cts_pin, DRIVER_NAME);
+		gpio_direction_input(uart->cts_pin);
+	}
+
+	if (uart->rts_pin >= 0) {
+		gpio_request(uart->rts_pin, DRIVER_NAME);
+		gpio_direction_output(uart->rts_pin, 0);
+	}
+#endif
+}
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
new file mode 100644
index 00000000000..cfd8ad4f1f2
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
@@ -0,0 +1,142 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART0_RX,
+	CH_UART0_RX,
+	CH_UART0_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+	0xFFC02000,
+	IRQ_UART1_RX,
+	CH_UART1_RX,
+	CH_UART1_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR1
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
new file mode 100644
index 00000000000..297821e2d79
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -0,0 +1,93 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF527_FAMILY
+
+#include "bf527.h"
+#include "mem_map.h"
+#include "defBF522.h"
+#include "anomaly.h"
+
+#if defined(CONFIG_BF527) || defined(CONFIG_BF526)
+#include "defBF527.h"
+#endif
+
+#if defined(CONFIG_BF525) || defined(CONFIG_BF524)
+#include "defBF525.h"
+#endif
+
+#if !defined(__ASSEMBLY__)
+#include "cdefBF522.h"
+
+#if defined(CONFIG_BF527) || defined(CONFIG_BF526)
+#include "cdefBF527.h"
+#endif
+
+#if defined(CONFIG_BF525) || defined(CONFIG_BF524)
+#include "cdefBF525.h"
+#endif
+#endif
+
+/* UART_IIR Register */
+#define STATUS(x)	((x << 1) & 0x06)
+#define STATUS_P1	0x02
+#define STATUS_P0	0x01
+
+#define BFIN_UART_NR_PORTS	2
+
+#define OFFSET_THR              0x00	/* Transmit Holding register            */
+#define OFFSET_RBR              0x00	/* Receive Buffer register              */
+#define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
+#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
+#define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
+#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
+#define OFFSET_LCR              0x0C	/* Line Control Register                */
+#define OFFSET_MCR              0x10	/* Modem Control Register               */
+#define OFFSET_LSR              0x14	/* Line Status Register                 */
+#define OFFSET_MSR              0x18	/* Modem Status Register                */
+#define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
+#define OFFSET_GCTL             0x24	/* Global Control Register              */
+
+/* DPMC*/
+#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
+#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
+#define STOPCK_OFF STOPCK
+
+/* PLL_DIV Masks													*/
+#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
+#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
+#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
+#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
+
+#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
new file mode 100644
index 00000000000..663c2bbdfd9
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
@@ -0,0 +1,46 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/cdefbf522.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF522_H
+#define _CDEF_BF522_H
+
+/* include all Core registers and bit definitions */
+#include "defBF522.h"
+
+/* include core specific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
+
+/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
+#include "cdefBF52x_base.h"
+
+#endif /* _CDEF_BF522_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
new file mode 100644
index 00000000000..00377eb59b7
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -0,0 +1,461 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/cdefbf525.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF525_H
+#define _CDEF_BF525_H
+
+/* include all Core registers and bit definitions */
+#include "defBF525.h"
+
+/* include core specific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
+
+/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
+#include "cdefBF52x_base.h"
+
+/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()			bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)		bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()			bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)		bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()			bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)		bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()			bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)		bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()			bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)		bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()			bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)		bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()			bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)		bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()		bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)		bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()			bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)		bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()			bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)		bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()		bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)		bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()		bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)		bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()		bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endpoint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
+#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
+
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endpoint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+
+/* USB Endpoint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+
+/* USB Endpoint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+
+/* USB Endpoint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+
+/* USB Endpoint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+
+/* USB Endpoint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+
+/* USB Endpoint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+
+/* USB Endpoint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+#endif /* _CDEF_BF525_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
new file mode 100644
index 00000000000..fca8db70811
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -0,0 +1,626 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/cdefbf527.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF527_H
+#define _CDEF_BF527_H
+
+/* include all Core registers and bit definitions */
+#include "defBF527.h"
+
+/* include core specific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
+
+/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
+#include "cdefBF52x_base.h"
+
+/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
+
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
+
+#define bfin_read_EMAC_OPMODE()			bfin_read32(EMAC_OPMODE)
+#define bfin_write_EMAC_OPMODE(val)		bfin_write32(EMAC_OPMODE, val)
+#define bfin_read_EMAC_ADDRLO()			bfin_read32(EMAC_ADDRLO)
+#define bfin_write_EMAC_ADDRLO(val)		bfin_write32(EMAC_ADDRLO, val)
+#define bfin_read_EMAC_ADDRHI()			bfin_read32(EMAC_ADDRHI)
+#define bfin_write_EMAC_ADDRHI(val)		bfin_write32(EMAC_ADDRHI, val)
+#define bfin_read_EMAC_HASHLO()			bfin_read32(EMAC_HASHLO)
+#define bfin_write_EMAC_HASHLO(val)		bfin_write32(EMAC_HASHLO, val)
+#define bfin_read_EMAC_HASHHI()			bfin_read32(EMAC_HASHHI)
+#define bfin_write_EMAC_HASHHI(val)		bfin_write32(EMAC_HASHHI, val)
+#define bfin_read_EMAC_STAADD()			bfin_read32(EMAC_STAADD)
+#define bfin_write_EMAC_STAADD(val)		bfin_write32(EMAC_STAADD, val)
+#define bfin_read_EMAC_STADAT()			bfin_read32(EMAC_STADAT)
+#define bfin_write_EMAC_STADAT(val)		bfin_write32(EMAC_STADAT, val)
+#define bfin_read_EMAC_FLC()			bfin_read32(EMAC_FLC)
+#define bfin_write_EMAC_FLC(val)		bfin_write32(EMAC_FLC, val)
+#define bfin_read_EMAC_VLAN1()			bfin_read32(EMAC_VLAN1)
+#define bfin_write_EMAC_VLAN1(val)		bfin_write32(EMAC_VLAN1, val)
+#define bfin_read_EMAC_VLAN2()			bfin_read32(EMAC_VLAN2)
+#define bfin_write_EMAC_VLAN2(val)		bfin_write32(EMAC_VLAN2, val)
+#define bfin_read_EMAC_WKUP_CTL()		bfin_read32(EMAC_WKUP_CTL)
+#define bfin_write_EMAC_WKUP_CTL(val)		bfin_write32(EMAC_WKUP_CTL, val)
+#define bfin_read_EMAC_WKUP_FFMSK0()		bfin_read32(EMAC_WKUP_FFMSK0)
+#define bfin_write_EMAC_WKUP_FFMSK0(val)	bfin_write32(EMAC_WKUP_FFMSK0, val)
+#define bfin_read_EMAC_WKUP_FFMSK1()		bfin_read32(EMAC_WKUP_FFMSK1)
+#define bfin_write_EMAC_WKUP_FFMSK1(val)	bfin_write32(EMAC_WKUP_FFMSK1, val)
+#define bfin_read_EMAC_WKUP_FFMSK2()		bfin_read32(EMAC_WKUP_FFMSK2)
+#define bfin_write_EMAC_WKUP_FFMSK2(val)	bfin_write32(EMAC_WKUP_FFMSK2, val)
+#define bfin_read_EMAC_WKUP_FFMSK3()		bfin_read32(EMAC_WKUP_FFMSK3)
+#define bfin_write_EMAC_WKUP_FFMSK3(val)	bfin_write32(EMAC_WKUP_FFMSK3, val)
+#define bfin_read_EMAC_WKUP_FFCMD()		bfin_read32(EMAC_WKUP_FFCMD)
+#define bfin_write_EMAC_WKUP_FFCMD(val)		bfin_write32(EMAC_WKUP_FFCMD, val)
+#define bfin_read_EMAC_WKUP_FFOFF()		bfin_read32(EMAC_WKUP_FFOFF)
+#define bfin_write_EMAC_WKUP_FFOFF(val)		bfin_write32(EMAC_WKUP_FFOFF, val)
+#define bfin_read_EMAC_WKUP_FFCRC0()		bfin_read32(EMAC_WKUP_FFCRC0)
+#define bfin_write_EMAC_WKUP_FFCRC0(val)	bfin_write32(EMAC_WKUP_FFCRC0, val)
+#define bfin_read_EMAC_WKUP_FFCRC1()		bfin_read32(EMAC_WKUP_FFCRC1)
+#define bfin_write_EMAC_WKUP_FFCRC1(val)	bfin_write32(EMAC_WKUP_FFCRC1, val)
+
+#define bfin_read_EMAC_SYSCTL()			bfin_read32(EMAC_SYSCTL)
+#define bfin_write_EMAC_SYSCTL(val)		bfin_write32(EMAC_SYSCTL, val)
+#define bfin_read_EMAC_SYSTAT()			bfin_read32(EMAC_SYSTAT)
+#define bfin_write_EMAC_SYSTAT(val)		bfin_write32(EMAC_SYSTAT, val)
+#define bfin_read_EMAC_RX_STAT()		bfin_read32(EMAC_RX_STAT)
+#define bfin_write_EMAC_RX_STAT(val)		bfin_write32(EMAC_RX_STAT, val)
+#define bfin_read_EMAC_RX_STKY()		bfin_read32(EMAC_RX_STKY)
+#define bfin_write_EMAC_RX_STKY(val)		bfin_write32(EMAC_RX_STKY, val)
+#define bfin_read_EMAC_RX_IRQE()		bfin_read32(EMAC_RX_IRQE)
+#define bfin_write_EMAC_RX_IRQE(val)		bfin_write32(EMAC_RX_IRQE, val)
+#define bfin_read_EMAC_TX_STAT()		bfin_read32(EMAC_TX_STAT)
+#define bfin_write_EMAC_TX_STAT(val)		bfin_write32(EMAC_TX_STAT, val)
+#define bfin_read_EMAC_TX_STKY()		bfin_read32(EMAC_TX_STKY)
+#define bfin_write_EMAC_TX_STKY(val)		bfin_write32(EMAC_TX_STKY, val)
+#define bfin_read_EMAC_TX_IRQE()		bfin_read32(EMAC_TX_IRQE)
+#define bfin_write_EMAC_TX_IRQE(val)		bfin_write32(EMAC_TX_IRQE, val)
+
+#define bfin_read_EMAC_MMC_CTL()		bfin_read32(EMAC_MMC_CTL)
+#define bfin_write_EMAC_MMC_CTL(val)		bfin_write32(EMAC_MMC_CTL, val)
+#define bfin_read_EMAC_MMC_RIRQS()		bfin_read32(EMAC_MMC_RIRQS)
+#define bfin_write_EMAC_MMC_RIRQS(val)		bfin_write32(EMAC_MMC_RIRQS, val)
+#define bfin_read_EMAC_MMC_RIRQE()		bfin_read32(EMAC_MMC_RIRQE)
+#define bfin_write_EMAC_MMC_RIRQE(val)		bfin_write32(EMAC_MMC_RIRQE, val)
+#define bfin_read_EMAC_MMC_TIRQS()		bfin_read32(EMAC_MMC_TIRQS)
+#define bfin_write_EMAC_MMC_TIRQS(val)		bfin_write32(EMAC_MMC_TIRQS, val)
+#define bfin_read_EMAC_MMC_TIRQE()		bfin_read32(EMAC_MMC_TIRQE)
+#define bfin_write_EMAC_MMC_TIRQE(val)		bfin_write32(EMAC_MMC_TIRQE, val)
+
+#define bfin_read_EMAC_RXC_OK()			bfin_read32(EMAC_RXC_OK)
+#define bfin_write_EMAC_RXC_OK(val)		bfin_write32(EMAC_RXC_OK, val)
+#define bfin_read_EMAC_RXC_FCS()		bfin_read32(EMAC_RXC_FCS)
+#define bfin_write_EMAC_RXC_FCS(val)		bfin_write32(EMAC_RXC_FCS, val)
+#define bfin_read_EMAC_RXC_ALIGN()		bfin_read32(EMAC_RXC_ALIGN)
+#define bfin_write_EMAC_RXC_ALIGN(val)		bfin_write32(EMAC_RXC_ALIGN, val)
+#define bfin_read_EMAC_RXC_OCTET()		bfin_read32(EMAC_RXC_OCTET)
+#define bfin_write_EMAC_RXC_OCTET(val)		bfin_write32(EMAC_RXC_OCTET, val)
+#define bfin_read_EMAC_RXC_DMAOVF()		bfin_read32(EMAC_RXC_DMAOVF)
+#define bfin_write_EMAC_RXC_DMAOVF(val)		bfin_write32(EMAC_RXC_DMAOVF, val)
+#define bfin_read_EMAC_RXC_UNICST()		bfin_read32(EMAC_RXC_UNICST)
+#define bfin_write_EMAC_RXC_UNICST(val)		bfin_write32(EMAC_RXC_UNICST, val)
+#define bfin_read_EMAC_RXC_MULTI()		bfin_read32(EMAC_RXC_MULTI)
+#define bfin_write_EMAC_RXC_MULTI(val)		bfin_write32(EMAC_RXC_MULTI, val)
+#define bfin_read_EMAC_RXC_BROAD()		bfin_read32(EMAC_RXC_BROAD)
+#define bfin_write_EMAC_RXC_BROAD(val)		bfin_write32(EMAC_RXC_BROAD, val)
+#define bfin_read_EMAC_RXC_LNERRI()		bfin_read32(EMAC_RXC_LNERRI)
+#define bfin_write_EMAC_RXC_LNERRI(val)		bfin_write32(EMAC_RXC_LNERRI, val)
+#define bfin_read_EMAC_RXC_LNERRO()		bfin_read32(EMAC_RXC_LNERRO)
+#define bfin_write_EMAC_RXC_LNERRO(val)		bfin_write32(EMAC_RXC_LNERRO, val)
+#define bfin_read_EMAC_RXC_LONG()		bfin_read32(EMAC_RXC_LONG)
+#define bfin_write_EMAC_RXC_LONG(val)		bfin_write32(EMAC_RXC_LONG, val)
+#define bfin_read_EMAC_RXC_MACCTL()		bfin_read32(EMAC_RXC_MACCTL)
+#define bfin_write_EMAC_RXC_MACCTL(val)		bfin_write32(EMAC_RXC_MACCTL, val)
+#define bfin_read_EMAC_RXC_OPCODE()		bfin_read32(EMAC_RXC_OPCODE)
+#define bfin_write_EMAC_RXC_OPCODE(val)		bfin_write32(EMAC_RXC_OPCODE, val)
+#define bfin_read_EMAC_RXC_PAUSE()		bfin_read32(EMAC_RXC_PAUSE)
+#define bfin_write_EMAC_RXC_PAUSE(val)		bfin_write32(EMAC_RXC_PAUSE, val)
+#define bfin_read_EMAC_RXC_ALLFRM()		bfin_read32(EMAC_RXC_ALLFRM)
+#define bfin_write_EMAC_RXC_ALLFRM(val)		bfin_write32(EMAC_RXC_ALLFRM, val)
+#define bfin_read_EMAC_RXC_ALLOCT()		bfin_read32(EMAC_RXC_ALLOCT)
+#define bfin_write_EMAC_RXC_ALLOCT(val)		bfin_write32(EMAC_RXC_ALLOCT, val)
+#define bfin_read_EMAC_RXC_TYPED()		bfin_read32(EMAC_RXC_TYPED)
+#define bfin_write_EMAC_RXC_TYPED(val)		bfin_write32(EMAC_RXC_TYPED, val)
+#define bfin_read_EMAC_RXC_SHORT()		bfin_read32(EMAC_RXC_SHORT)
+#define bfin_write_EMAC_RXC_SHORT(val)		bfin_write32(EMAC_RXC_SHORT, val)
+#define bfin_read_EMAC_RXC_EQ64()		bfin_read32(EMAC_RXC_EQ64)
+#define bfin_write_EMAC_RXC_EQ64(val)		bfin_write32(EMAC_RXC_EQ64, val)
+#define bfin_read_EMAC_RXC_LT128()		bfin_read32(EMAC_RXC_LT128)
+#define bfin_write_EMAC_RXC_LT128(val)		bfin_write32(EMAC_RXC_LT128, val)
+#define bfin_read_EMAC_RXC_LT256()		bfin_read32(EMAC_RXC_LT256)
+#define bfin_write_EMAC_RXC_LT256(val)		bfin_write32(EMAC_RXC_LT256, val)
+#define bfin_read_EMAC_RXC_LT512()		bfin_read32(EMAC_RXC_LT512)
+#define bfin_write_EMAC_RXC_LT512(val)		bfin_write32(EMAC_RXC_LT512, val)
+#define bfin_read_EMAC_RXC_LT1024()		bfin_read32(EMAC_RXC_LT1024)
+#define bfin_write_EMAC_RXC_LT1024(val)		bfin_write32(EMAC_RXC_LT1024, val)
+#define bfin_read_EMAC_RXC_GE1024()		bfin_read32(EMAC_RXC_GE1024)
+#define bfin_write_EMAC_RXC_GE1024(val)		bfin_write32(EMAC_RXC_GE1024, val)
+
+#define bfin_read_EMAC_TXC_OK()			bfin_read32(EMAC_TXC_OK)
+#define bfin_write_EMAC_TXC_OK(val)		bfin_write32(EMAC_TXC_OK, val)
+#define bfin_read_EMAC_TXC_1COL()		bfin_read32(EMAC_TXC_1COL)
+#define bfin_write_EMAC_TXC_1COL(val)		bfin_write32(EMAC_TXC_1COL, val)
+#define bfin_read_EMAC_TXC_GT1COL()		bfin_read32(EMAC_TXC_GT1COL)
+#define bfin_write_EMAC_TXC_GT1COL(val)		bfin_write32(EMAC_TXC_GT1COL, val)
+#define bfin_read_EMAC_TXC_OCTET()		bfin_read32(EMAC_TXC_OCTET)
+#define bfin_write_EMAC_TXC_OCTET(val)		bfin_write32(EMAC_TXC_OCTET, val)
+#define bfin_read_EMAC_TXC_DEFER()		bfin_read32(EMAC_TXC_DEFER)
+#define bfin_write_EMAC_TXC_DEFER(val)		bfin_write32(EMAC_TXC_DEFER, val)
+#define bfin_read_EMAC_TXC_LATECL()		bfin_read32(EMAC_TXC_LATECL)
+#define bfin_write_EMAC_TXC_LATECL(val)		bfin_write32(EMAC_TXC_LATECL, val)
+#define bfin_read_EMAC_TXC_XS_COL()		bfin_read32(EMAC_TXC_XS_COL)
+#define bfin_write_EMAC_TXC_XS_COL(val)		bfin_write32(EMAC_TXC_XS_COL, val)
+#define bfin_read_EMAC_TXC_DMAUND()		bfin_read32(EMAC_TXC_DMAUND)
+#define bfin_write_EMAC_TXC_DMAUND(val)		bfin_write32(EMAC_TXC_DMAUND, val)
+#define bfin_read_EMAC_TXC_CRSERR()		bfin_read32(EMAC_TXC_CRSERR)
+#define bfin_write_EMAC_TXC_CRSERR(val)		bfin_write32(EMAC_TXC_CRSERR, val)
+#define bfin_read_EMAC_TXC_UNICST()		bfin_read32(EMAC_TXC_UNICST)
+#define bfin_write_EMAC_TXC_UNICST(val)		bfin_write32(EMAC_TXC_UNICST, val)
+#define bfin_read_EMAC_TXC_MULTI()		bfin_read32(EMAC_TXC_MULTI)
+#define bfin_write_EMAC_TXC_MULTI(val)		bfin_write32(EMAC_TXC_MULTI, val)
+#define bfin_read_EMAC_TXC_BROAD()		bfin_read32(EMAC_TXC_BROAD)
+#define bfin_write_EMAC_TXC_BROAD(val)		bfin_write32(EMAC_TXC_BROAD, val)
+#define bfin_read_EMAC_TXC_XS_DFR()		bfin_read32(EMAC_TXC_XS_DFR)
+#define bfin_write_EMAC_TXC_XS_DFR(val)		bfin_write32(EMAC_TXC_XS_DFR, val)
+#define bfin_read_EMAC_TXC_MACCTL()		bfin_read32(EMAC_TXC_MACCTL)
+#define bfin_write_EMAC_TXC_MACCTL(val)		bfin_write32(EMAC_TXC_MACCTL, val)
+#define bfin_read_EMAC_TXC_ALLFRM()		bfin_read32(EMAC_TXC_ALLFRM)
+#define bfin_write_EMAC_TXC_ALLFRM(val)		bfin_write32(EMAC_TXC_ALLFRM, val)
+#define bfin_read_EMAC_TXC_ALLOCT()		bfin_read32(EMAC_TXC_ALLOCT)
+#define bfin_write_EMAC_TXC_ALLOCT(val)		bfin_write32(EMAC_TXC_ALLOCT, val)
+#define bfin_read_EMAC_TXC_EQ64()		bfin_read32(EMAC_TXC_EQ64)
+#define bfin_write_EMAC_TXC_EQ64(val)		bfin_write32(EMAC_TXC_EQ64, val)
+#define bfin_read_EMAC_TXC_LT128()		bfin_read32(EMAC_TXC_LT128)
+#define bfin_write_EMAC_TXC_LT128(val)		bfin_write32(EMAC_TXC_LT128, val)
+#define bfin_read_EMAC_TXC_LT256()		bfin_read32(EMAC_TXC_LT256)
+#define bfin_write_EMAC_TXC_LT256(val)		bfin_write32(EMAC_TXC_LT256, val)
+#define bfin_read_EMAC_TXC_LT512()		bfin_read32(EMAC_TXC_LT512)
+#define bfin_write_EMAC_TXC_LT512(val)		bfin_write32(EMAC_TXC_LT512, val)
+#define bfin_read_EMAC_TXC_LT1024()		bfin_read32(EMAC_TXC_LT1024)
+#define bfin_write_EMAC_TXC_LT1024(val)		bfin_write32(EMAC_TXC_LT1024, val)
+#define bfin_read_EMAC_TXC_GE1024()		bfin_read32(EMAC_TXC_GE1024)
+#define bfin_write_EMAC_TXC_GE1024(val)		bfin_write32(EMAC_TXC_GE1024, val)
+#define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
+#define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()			bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)		bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()			bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)		bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()			bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)		bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()			bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)		bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()			bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)		bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()			bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)		bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()			bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)		bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()		bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)		bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()			bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)		bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()			bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)		bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()		bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)		bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()		bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)		bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()		bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endpoint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
+#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
+
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endpoint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+
+/* USB Endpoint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+
+/* USB Endpoint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+
+/* USB Endpoint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+
+/* USB Endpoint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+
+/* USB Endpoint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+
+/* USB Endpoint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+
+/* USB Endpoint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+#endif /* _CDEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
new file mode 100644
index 00000000000..9a814b9a12b
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -0,0 +1,1204 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/cdefBF52x_base.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF52X_H
+#define _CDEF_BF52X_H
+
+#include <asm/system.h>
+#include <asm/blackfin.h>
+
+#include "defBF52x_base.h"
+
+/* Include core specific register pointer definitions 								*/
+#include <asm/cdef_LPBlackfin.h>
+
+/* ==== begin from cdefBF534.h ==== */
+
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define bfin_read_PLL_CTL()			bfin_read16(PLL_CTL)
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_DIV()			bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)			bfin_write16(PLL_DIV, val)
+#define bfin_read_VR_CTL()			bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_STAT()			bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)		bfin_write16(PLL_STAT, val)
+#define bfin_read_PLL_LOCKCNT()			bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)		bfin_write16(PLL_LOCKCNT, val)
+#define bfin_read_CHIPID()			bfin_read32(CHIPID)
+#define bfin_write_CHIPID(val)			bfin_write32(CHIPID, val)
+
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define bfin_read_SWRST()			bfin_read16(SWRST)
+#define bfin_write_SWRST(val)			bfin_write16(SWRST, val)
+#define bfin_read_SYSCR()			bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)			bfin_write16(SYSCR, val)
+
+#define bfin_read_SIC_RVECT()			bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)		bfin_write32(SIC_RVECT, val)
+#define bfin_read_SIC_IMASK0()			bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val)		bfin_write32(SIC_IMASK0, val)
+#define bfin_read_SIC_IMASK(x)			bfin_read32(SIC_IMASK0 + (x << 6))
+#define bfin_write_SIC_IMASK(x, val)		bfin_write32((SIC_IMASK0 + (x << 6)), val)
+
+#define bfin_read_SIC_IAR0()			bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)		bfin_write32(SIC_IAR0, val)
+#define bfin_read_SIC_IAR1()			bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)		bfin_write32(SIC_IAR1, val)
+#define bfin_read_SIC_IAR2()			bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)		bfin_write32(SIC_IAR2, val)
+#define bfin_read_SIC_IAR3()			bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)		bfin_write32(SIC_IAR3, val)
+
+#define bfin_read_SIC_ISR0()			bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val)		bfin_write32(SIC_ISR0, val)
+#define bfin_read_SIC_ISR(x)			bfin_read32(SIC_ISR0 + (x << 6))
+#define bfin_write_SIC_ISR(x, val)		bfin_write32((SIC_ISR0 + (x << 6)), val)
+
+#define bfin_read_SIC_IWR0()			bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val)		bfin_write32(SIC_IWR0, val)
+#define bfin_read_SIC_IWR(x)			bfin_read32(SIC_IWR0 + (x << 6))
+#define bfin_write_SIC_IWR(x, val)		bfin_write32((SIC_IWR0 + (x << 6)), val)
+
+/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
+
+#define bfin_read_SIC_IMASK1()			bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val)		bfin_write32(SIC_IMASK1, val)
+#define bfin_read_SIC_IAR4()			bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val)		bfin_write32(SIC_IAR4, val)
+#define bfin_read_SIC_IAR5()			bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val)		bfin_write32(SIC_IAR5, val)
+#define bfin_read_SIC_IAR6()			bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val)		bfin_write32(SIC_IAR6, val)
+#define bfin_read_SIC_IAR7()			bfin_read32(SIC_IAR7)
+#define bfin_write_SIC_IAR7(val)		bfin_write32(SIC_IAR7, val)
+#define bfin_read_SIC_ISR1()			bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val)		bfin_write32(SIC_ISR1, val)
+#define bfin_read_SIC_IWR1()			bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val)		bfin_write32(SIC_IWR1, val)
+
+/* Watchdog Timer		(0xFFC00200 - 0xFFC002FF)									*/
+#define bfin_read_WDOG_CTL()			bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)		bfin_write16(WDOG_CTL, val)
+#define bfin_read_WDOG_CNT()			bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)		bfin_write32(WDOG_CNT, val)
+#define bfin_read_WDOG_STAT()			bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)		bfin_write32(WDOG_STAT, val)
+
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define bfin_read_RTC_STAT()			bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)		bfin_write32(RTC_STAT, val)
+#define bfin_read_RTC_ICTL()			bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)		bfin_write16(RTC_ICTL, val)
+#define bfin_read_RTC_ISTAT()			bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)		bfin_write16(RTC_ISTAT, val)
+#define bfin_read_RTC_SWCNT()			bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)		bfin_write16(RTC_SWCNT, val)
+#define bfin_read_RTC_ALARM()			bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)		bfin_write32(RTC_ALARM, val)
+#define bfin_read_RTC_FAST()			bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val)		bfin_write16(RTC_FAST, val)
+#define bfin_read_RTC_PREN()			bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)		bfin_write16(RTC_PREN, val)
+
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define bfin_read_UART0_THR()			bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val)		bfin_write16(UART0_THR, val)
+#define bfin_read_UART0_RBR()			bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val)		bfin_write16(UART0_RBR, val)
+#define bfin_read_UART0_DLL()			bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val)		bfin_write16(UART0_DLL, val)
+#define bfin_read_UART0_IER()			bfin_read16(UART0_IER)
+#define bfin_write_UART0_IER(val)		bfin_write16(UART0_IER, val)
+#define bfin_read_UART0_DLH()			bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val)		bfin_write16(UART0_DLH, val)
+#define bfin_read_UART0_IIR()			bfin_read16(UART0_IIR)
+#define bfin_write_UART0_IIR(val)		bfin_write16(UART0_IIR, val)
+#define bfin_read_UART0_LCR()			bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val)		bfin_write16(UART0_LCR, val)
+#define bfin_read_UART0_MCR()			bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val)		bfin_write16(UART0_MCR, val)
+#define bfin_read_UART0_LSR()			bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val)		bfin_write16(UART0_LSR, val)
+#define bfin_read_UART0_MSR()			bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val)		bfin_write16(UART0_MSR, val)
+#define bfin_read_UART0_SCR()			bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val)		bfin_write16(UART0_SCR, val)
+#define bfin_read_UART0_GCTL()			bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)		bfin_write16(UART0_GCTL, val)
+
+
+/* SPI Controller		(0xFFC00500 - 0xFFC005FF)									*/
+#define bfin_read_SPI_CTL()			bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)			bfin_write16(SPI_CTL, val)
+#define bfin_read_SPI_FLG()			bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)			bfin_write16(SPI_FLG, val)
+#define bfin_read_SPI_STAT()			bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)		bfin_write16(SPI_STAT, val)
+#define bfin_read_SPI_TDBR()			bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)		bfin_write16(SPI_TDBR, val)
+#define bfin_read_SPI_RDBR()			bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)		bfin_write16(SPI_RDBR, val)
+#define bfin_read_SPI_BAUD()			bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)		bfin_write16(SPI_BAUD, val)
+#define bfin_read_SPI_SHADOW()			bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)		bfin_write16(SPI_SHADOW, val)
+
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define bfin_read_TIMER0_CONFIG()		bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)		bfin_write16(TIMER0_CONFIG, val)
+#define bfin_read_TIMER0_COUNTER()		bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)		bfin_write32(TIMER0_COUNTER, val)
+#define bfin_read_TIMER0_PERIOD()		bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)		bfin_write32(TIMER0_PERIOD, val)
+#define bfin_read_TIMER0_WIDTH()		bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)		bfin_write32(TIMER0_WIDTH, val)
+
+#define bfin_read_TIMER1_CONFIG()		bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)		bfin_write16(TIMER1_CONFIG, val)
+#define bfin_read_TIMER1_COUNTER()		bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)		bfin_write32(TIMER1_COUNTER, val)
+#define bfin_read_TIMER1_PERIOD()		bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)		bfin_write32(TIMER1_PERIOD, val)
+#define bfin_read_TIMER1_WIDTH()		bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)		bfin_write32(TIMER1_WIDTH, val)
+
+#define bfin_read_TIMER2_CONFIG()		bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)		bfin_write16(TIMER2_CONFIG, val)
+#define bfin_read_TIMER2_COUNTER()		bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)		bfin_write32(TIMER2_COUNTER, val)
+#define bfin_read_TIMER2_PERIOD()		bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)		bfin_write32(TIMER2_PERIOD, val)
+#define bfin_read_TIMER2_WIDTH()		bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)		bfin_write32(TIMER2_WIDTH, val)
+
+#define bfin_read_TIMER3_CONFIG()		bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)		bfin_write16(TIMER3_CONFIG, val)
+#define bfin_read_TIMER3_COUNTER()		bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)		bfin_write32(TIMER3_COUNTER, val)
+#define bfin_read_TIMER3_PERIOD()		bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)		bfin_write32(TIMER3_PERIOD, val)
+#define bfin_read_TIMER3_WIDTH()		bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)		bfin_write32(TIMER3_WIDTH, val)
+
+#define bfin_read_TIMER4_CONFIG()		bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)		bfin_write16(TIMER4_CONFIG, val)
+#define bfin_read_TIMER4_COUNTER()		bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)		bfin_write32(TIMER4_COUNTER, val)
+#define bfin_read_TIMER4_PERIOD()		bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)		bfin_write32(TIMER4_PERIOD, val)
+#define bfin_read_TIMER4_WIDTH()		bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)		bfin_write32(TIMER4_WIDTH, val)
+
+#define bfin_read_TIMER5_CONFIG()		bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)		bfin_write16(TIMER5_CONFIG, val)
+#define bfin_read_TIMER5_COUNTER()		bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)		bfin_write32(TIMER5_COUNTER, val)
+#define bfin_read_TIMER5_PERIOD()		bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)		bfin_write32(TIMER5_PERIOD, val)
+#define bfin_read_TIMER5_WIDTH()		bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)		bfin_write32(TIMER5_WIDTH, val)
+
+#define bfin_read_TIMER6_CONFIG()		bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)		bfin_write16(TIMER6_CONFIG, val)
+#define bfin_read_TIMER6_COUNTER()		bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)		bfin_write32(TIMER6_COUNTER, val)
+#define bfin_read_TIMER6_PERIOD()		bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)		bfin_write32(TIMER6_PERIOD, val)
+#define bfin_read_TIMER6_WIDTH()		bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)		bfin_write32(TIMER6_WIDTH, val)
+
+#define bfin_read_TIMER7_CONFIG()		bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)		bfin_write16(TIMER7_CONFIG, val)
+#define bfin_read_TIMER7_COUNTER()		bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)		bfin_write32(TIMER7_COUNTER, val)
+#define bfin_read_TIMER7_PERIOD()		bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)		bfin_write32(TIMER7_PERIOD, val)
+#define bfin_read_TIMER7_WIDTH()		bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)		bfin_write32(TIMER7_WIDTH, val)
+
+#define bfin_read_TIMER_ENABLE()		bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)		bfin_write16(TIMER_ENABLE, val)
+#define bfin_read_TIMER_DISABLE()		bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)		bfin_write16(TIMER_DISABLE, val)
+#define bfin_read_TIMER_STATUS()		bfin_read32(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)		bfin_write32(TIMER_STATUS, val)
+
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)								*/
+#define bfin_read_PORTFIO()			bfin_read16(PORTFIO)
+#define bfin_write_PORTFIO(val)			bfin_write16(PORTFIO, val)
+#define bfin_read_PORTFIO_CLEAR()		bfin_read16(PORTFIO_CLEAR)
+#define bfin_write_PORTFIO_CLEAR(val)		bfin_write16(PORTFIO_CLEAR, val)
+#define bfin_read_PORTFIO_SET()			bfin_read16(PORTFIO_SET)
+#define bfin_write_PORTFIO_SET(val)		bfin_write16(PORTFIO_SET, val)
+#define bfin_read_PORTFIO_TOGGLE()		bfin_read16(PORTFIO_TOGGLE)
+#define bfin_write_PORTFIO_TOGGLE(val)		bfin_write16(PORTFIO_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKA()		bfin_read16(PORTFIO_MASKA)
+#define bfin_write_PORTFIO_MASKA(val)		bfin_write16(PORTFIO_MASKA, val)
+#define bfin_read_PORTFIO_MASKA_CLEAR()		bfin_read16(PORTFIO_MASKA_CLEAR)
+#define bfin_write_PORTFIO_MASKA_CLEAR(val)	bfin_write16(PORTFIO_MASKA_CLEAR, val)
+#define bfin_read_PORTFIO_MASKA_SET()		bfin_read16(PORTFIO_MASKA_SET)
+#define bfin_write_PORTFIO_MASKA_SET(val)	bfin_write16(PORTFIO_MASKA_SET, val)
+#define bfin_read_PORTFIO_MASKA_TOGGLE()	bfin_read16(PORTFIO_MASKA_TOGGLE)
+#define bfin_write_PORTFIO_MASKA_TOGGLE(val)	bfin_write16(PORTFIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKB()		bfin_read16(PORTFIO_MASKB)
+#define bfin_write_PORTFIO_MASKB(val)		bfin_write16(PORTFIO_MASKB, val)
+#define bfin_read_PORTFIO_MASKB_CLEAR()		bfin_read16(PORTFIO_MASKB_CLEAR)
+#define bfin_write_PORTFIO_MASKB_CLEAR(val)	bfin_write16(PORTFIO_MASKB_CLEAR, val)
+#define bfin_read_PORTFIO_MASKB_SET()		bfin_read16(PORTFIO_MASKB_SET)
+#define bfin_write_PORTFIO_MASKB_SET(val)	bfin_write16(PORTFIO_MASKB_SET, val)
+#define bfin_read_PORTFIO_MASKB_TOGGLE()	bfin_read16(PORTFIO_MASKB_TOGGLE)
+#define bfin_write_PORTFIO_MASKB_TOGGLE(val)	bfin_write16(PORTFIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTFIO_DIR()			bfin_read16(PORTFIO_DIR)
+#define bfin_write_PORTFIO_DIR(val)		bfin_write16(PORTFIO_DIR, val)
+#define bfin_read_PORTFIO_POLAR()		bfin_read16(PORTFIO_POLAR)
+#define bfin_write_PORTFIO_POLAR(val)		bfin_write16(PORTFIO_POLAR, val)
+#define bfin_read_PORTFIO_EDGE()		bfin_read16(PORTFIO_EDGE)
+#define bfin_write_PORTFIO_EDGE(val)		bfin_write16(PORTFIO_EDGE, val)
+#define bfin_read_PORTFIO_BOTH()		bfin_read16(PORTFIO_BOTH)
+#define bfin_write_PORTFIO_BOTH(val)		bfin_write16(PORTFIO_BOTH, val)
+#define bfin_read_PORTFIO_INEN()		bfin_read16(PORTFIO_INEN)
+#define bfin_write_PORTFIO_INEN(val)		bfin_write16(PORTFIO_INEN, val)
+
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)								*/
+#define bfin_read_SPORT0_TCR1()			bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)		bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()			bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)		bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()		bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)		bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()		bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)		bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()			bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)		bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()			bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)		bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_TX32()			bfin_read32(SPORT0_TX32)
+#define bfin_write_SPORT0_TX32(val)		bfin_write32(SPORT0_TX32, val)
+#define bfin_read_SPORT0_RX32()			bfin_read32(SPORT0_RX32)
+#define bfin_write_SPORT0_RX32(val)		bfin_write32(SPORT0_RX32, val)
+#define bfin_read_SPORT0_TX16()			bfin_read16(SPORT0_TX16)
+#define bfin_write_SPORT0_TX16(val)		bfin_write16(SPORT0_TX16, val)
+#define bfin_read_SPORT0_RX16()			bfin_read16(SPORT0_RX16)
+#define bfin_write_SPORT0_RX16(val)		bfin_write16(SPORT0_RX16, val)
+#define bfin_read_SPORT0_RCR1()			bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)		bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()			bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)		bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()		bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)		bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()		bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)		bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()			bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)		bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()			bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)		bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()		bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)		bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()		bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)		bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()		bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)		bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()		bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)		bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()		bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)		bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()		bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)		bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()		bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)		bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()		bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)		bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()		bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)		bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()		bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)		bfin_write32(SPORT0_MRCS3, val)
+
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)								*/
+#define bfin_read_SPORT1_TCR1()			bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)		bfin_write16(SPORT1_TCR1, val)
+#define bfin_read_SPORT1_TCR2()			bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)		bfin_write16(SPORT1_TCR2, val)
+#define bfin_read_SPORT1_TCLKDIV()		bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)		bfin_write16(SPORT1_TCLKDIV, val)
+#define bfin_read_SPORT1_TFSDIV()		bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)		bfin_write16(SPORT1_TFSDIV, val)
+#define bfin_read_SPORT1_TX()			bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)		bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX()			bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)		bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_TX32()			bfin_read32(SPORT1_TX32)
+#define bfin_write_SPORT1_TX32(val)		bfin_write32(SPORT1_TX32, val)
+#define bfin_read_SPORT1_RX32()			bfin_read32(SPORT1_RX32)
+#define bfin_write_SPORT1_RX32(val)		bfin_write32(SPORT1_RX32, val)
+#define bfin_read_SPORT1_TX16()			bfin_read16(SPORT1_TX16)
+#define bfin_write_SPORT1_TX16(val)		bfin_write16(SPORT1_TX16, val)
+#define bfin_read_SPORT1_RX16()			bfin_read16(SPORT1_RX16)
+#define bfin_write_SPORT1_RX16(val)		bfin_write16(SPORT1_RX16, val)
+#define bfin_read_SPORT1_RCR1()			bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)		bfin_write16(SPORT1_RCR1, val)
+#define bfin_read_SPORT1_RCR2()			bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)		bfin_write16(SPORT1_RCR2, val)
+#define bfin_read_SPORT1_RCLKDIV()		bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)		bfin_write16(SPORT1_RCLKDIV, val)
+#define bfin_read_SPORT1_RFSDIV()		bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)		bfin_write16(SPORT1_RFSDIV, val)
+#define bfin_read_SPORT1_STAT()			bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)		bfin_write16(SPORT1_STAT, val)
+#define bfin_read_SPORT1_CHNL()			bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)		bfin_write16(SPORT1_CHNL, val)
+#define bfin_read_SPORT1_MCMC1()		bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)		bfin_write16(SPORT1_MCMC1, val)
+#define bfin_read_SPORT1_MCMC2()		bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)		bfin_write16(SPORT1_MCMC2, val)
+#define bfin_read_SPORT1_MTCS0()		bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)		bfin_write32(SPORT1_MTCS0, val)
+#define bfin_read_SPORT1_MTCS1()		bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)		bfin_write32(SPORT1_MTCS1, val)
+#define bfin_read_SPORT1_MTCS2()		bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)		bfin_write32(SPORT1_MTCS2, val)
+#define bfin_read_SPORT1_MTCS3()		bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)		bfin_write32(SPORT1_MTCS3, val)
+#define bfin_read_SPORT1_MRCS0()		bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)		bfin_write32(SPORT1_MRCS0, val)
+#define bfin_read_SPORT1_MRCS1()		bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)		bfin_write32(SPORT1_MRCS1, val)
+#define bfin_read_SPORT1_MRCS2()		bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)		bfin_write32(SPORT1_MRCS2, val)
+#define bfin_read_SPORT1_MRCS3()		bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)		bfin_write32(SPORT1_MRCS3, val)
+
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)							*/
+#define bfin_read_EBIU_AMGCTL()			bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)		bfin_write16(EBIU_AMGCTL, val)
+#define bfin_read_EBIU_AMBCTL0()		bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)		bfin_write32(EBIU_AMBCTL0, val)
+#define bfin_read_EBIU_AMBCTL1()		bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)		bfin_write32(EBIU_AMBCTL1, val)
+#define bfin_read_EBIU_SDGCTL()			bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)		bfin_write32(EBIU_SDGCTL, val)
+#define bfin_read_EBIU_SDBCTL()			bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)		bfin_write16(EBIU_SDBCTL, val)
+#define bfin_read_EBIU_SDRRC()			bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)		bfin_write16(EBIU_SDRRC, val)
+#define bfin_read_EBIU_SDSTAT()			bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)		bfin_write16(EBIU_SDSTAT, val)
+
+
+/* DMA Traffic Control Registers													*/
+#define bfin_read_DMA_TC_PER()			bfin_read16(DMA_TC_PER)
+#define bfin_write_DMA_TC_PER(val)		bfin_write16(DMA_TC_PER, val)
+#define bfin_read_DMA_TC_CNT()			bfin_read16(DMA_TC_CNT)
+#define bfin_write_DMA_TC_CNT(val)		bfin_write16(DMA_TC_CNT, val)
+
+/* Alternate deprecated register names (below) provided for backwards code compatibility */
+#define bfin_read_DMA_TCPER()			bfin_read16(DMA_TCPER)
+#define bfin_write_DMA_TCPER(val)		bfin_write16(DMA_TCPER, val)
+#define bfin_read_DMA_TCCNT()			bfin_read16(DMA_TCCNT)
+#define bfin_write_DMA_TCCNT(val)		bfin_write16(DMA_TCCNT, val)
+
+/* DMA Controller																	*/
+#define bfin_read_DMA0_CONFIG()			bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)		bfin_write16(DMA0_CONFIG, val)
+#define bfin_read_DMA0_NEXT_DESC_PTR()		bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val)	bfin_write32(DMA0_NEXT_DESC_PTR, val)
+#define bfin_read_DMA0_START_ADDR()		bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val)		bfin_write32(DMA0_START_ADDR, val)
+#define bfin_read_DMA0_X_COUNT()		bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)		bfin_write16(DMA0_X_COUNT, val)
+#define bfin_read_DMA0_Y_COUNT()		bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)		bfin_write16(DMA0_Y_COUNT, val)
+#define bfin_read_DMA0_X_MODIFY()		bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)		bfin_write16(DMA0_X_MODIFY, val)
+#define bfin_read_DMA0_Y_MODIFY()		bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)		bfin_write16(DMA0_Y_MODIFY, val)
+#define bfin_read_DMA0_CURR_DESC_PTR()		bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val)	bfin_write32(DMA0_CURR_DESC_PTR, val)
+#define bfin_read_DMA0_CURR_ADDR()		bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val)		bfin_write32(DMA0_CURR_ADDR, val)
+#define bfin_read_DMA0_CURR_X_COUNT()		bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)	bfin_write16(DMA0_CURR_X_COUNT, val)
+#define bfin_read_DMA0_CURR_Y_COUNT()		bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)	bfin_write16(DMA0_CURR_Y_COUNT, val)
+#define bfin_read_DMA0_IRQ_STATUS()		bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)		bfin_write16(DMA0_IRQ_STATUS, val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()		bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)	bfin_write16(DMA0_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA1_CONFIG()			bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)		bfin_write16(DMA1_CONFIG, val)
+#define bfin_read_DMA1_NEXT_DESC_PTR()		bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val)	bfin_write32(DMA1_NEXT_DESC_PTR, val)
+#define bfin_read_DMA1_START_ADDR()		bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val)		bfin_write32(DMA1_START_ADDR, val)
+#define bfin_read_DMA1_X_COUNT()		bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)		bfin_write16(DMA1_X_COUNT, val)
+#define bfin_read_DMA1_Y_COUNT()		bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)		bfin_write16(DMA1_Y_COUNT, val)
+#define bfin_read_DMA1_X_MODIFY()		bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)		bfin_write16(DMA1_X_MODIFY, val)
+#define bfin_read_DMA1_Y_MODIFY()		bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)		bfin_write16(DMA1_Y_MODIFY, val)
+#define bfin_read_DMA1_CURR_DESC_PTR()		bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val)	bfin_write32(DMA1_CURR_DESC_PTR, val)
+#define bfin_read_DMA1_CURR_ADDR()		bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val)		bfin_write32(DMA1_CURR_ADDR, val)
+#define bfin_read_DMA1_CURR_X_COUNT()		bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)	bfin_write16(DMA1_CURR_X_COUNT, val)
+#define bfin_read_DMA1_CURR_Y_COUNT()		bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)	bfin_write16(DMA1_CURR_Y_COUNT, val)
+#define bfin_read_DMA1_IRQ_STATUS()		bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)		bfin_write16(DMA1_IRQ_STATUS, val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()		bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)	bfin_write16(DMA1_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA2_CONFIG()			bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)		bfin_write16(DMA2_CONFIG, val)
+#define bfin_read_DMA2_NEXT_DESC_PTR()		bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val)	bfin_write32(DMA2_NEXT_DESC_PTR, val)
+#define bfin_read_DMA2_START_ADDR()		bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val)		bfin_write32(DMA2_START_ADDR, val)
+#define bfin_read_DMA2_X_COUNT()		bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)		bfin_write16(DMA2_X_COUNT, val)
+#define bfin_read_DMA2_Y_COUNT()		bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)		bfin_write16(DMA2_Y_COUNT, val)
+#define bfin_read_DMA2_X_MODIFY()		bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)		bfin_write16(DMA2_X_MODIFY, val)
+#define bfin_read_DMA2_Y_MODIFY()		bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)		bfin_write16(DMA2_Y_MODIFY, val)
+#define bfin_read_DMA2_CURR_DESC_PTR()		bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val)	bfin_write32(DMA2_CURR_DESC_PTR, val)
+#define bfin_read_DMA2_CURR_ADDR()		bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val)		bfin_write32(DMA2_CURR_ADDR, val)
+#define bfin_read_DMA2_CURR_X_COUNT()		bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)	bfin_write16(DMA2_CURR_X_COUNT, val)
+#define bfin_read_DMA2_CURR_Y_COUNT()		bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)	bfin_write16(DMA2_CURR_Y_COUNT, val)
+#define bfin_read_DMA2_IRQ_STATUS()		bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)		bfin_write16(DMA2_IRQ_STATUS, val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()		bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)	bfin_write16(DMA2_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA3_CONFIG()			bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)		bfin_write16(DMA3_CONFIG, val)
+#define bfin_read_DMA3_NEXT_DESC_PTR()		bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val)	bfin_write32(DMA3_NEXT_DESC_PTR, val)
+#define bfin_read_DMA3_START_ADDR()		bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val)		bfin_write32(DMA3_START_ADDR, val)
+#define bfin_read_DMA3_X_COUNT()		bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)		bfin_write16(DMA3_X_COUNT, val)
+#define bfin_read_DMA3_Y_COUNT()		bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)		bfin_write16(DMA3_Y_COUNT, val)
+#define bfin_read_DMA3_X_MODIFY()		bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)		bfin_write16(DMA3_X_MODIFY, val)
+#define bfin_read_DMA3_Y_MODIFY()		bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)		bfin_write16(DMA3_Y_MODIFY, val)
+#define bfin_read_DMA3_CURR_DESC_PTR()		bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val)	bfin_write32(DMA3_CURR_DESC_PTR, val)
+#define bfin_read_DMA3_CURR_ADDR()		bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val)		bfin_write32(DMA3_CURR_ADDR, val)
+#define bfin_read_DMA3_CURR_X_COUNT()		bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)	bfin_write16(DMA3_CURR_X_COUNT, val)
+#define bfin_read_DMA3_CURR_Y_COUNT()		bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)	bfin_write16(DMA3_CURR_Y_COUNT, val)
+#define bfin_read_DMA3_IRQ_STATUS()		bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)		bfin_write16(DMA3_IRQ_STATUS, val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()		bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)	bfin_write16(DMA3_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA4_CONFIG()			bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)		bfin_write16(DMA4_CONFIG, val)
+#define bfin_read_DMA4_NEXT_DESC_PTR()		bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val)	bfin_write32(DMA4_NEXT_DESC_PTR, val)
+#define bfin_read_DMA4_START_ADDR()		bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val)		bfin_write32(DMA4_START_ADDR, val)
+#define bfin_read_DMA4_X_COUNT()		bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)		bfin_write16(DMA4_X_COUNT, val)
+#define bfin_read_DMA4_Y_COUNT()		bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)		bfin_write16(DMA4_Y_COUNT, val)
+#define bfin_read_DMA4_X_MODIFY()		bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)		bfin_write16(DMA4_X_MODIFY, val)
+#define bfin_read_DMA4_Y_MODIFY()		bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)		bfin_write16(DMA4_Y_MODIFY, val)
+#define bfin_read_DMA4_CURR_DESC_PTR()		bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val)	bfin_write32(DMA4_CURR_DESC_PTR, val)
+#define bfin_read_DMA4_CURR_ADDR()		bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val)		bfin_write32(DMA4_CURR_ADDR, val)
+#define bfin_read_DMA4_CURR_X_COUNT()		bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)	bfin_write16(DMA4_CURR_X_COUNT, val)
+#define bfin_read_DMA4_CURR_Y_COUNT()		bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)	bfin_write16(DMA4_CURR_Y_COUNT, val)
+#define bfin_read_DMA4_IRQ_STATUS()		bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)		bfin_write16(DMA4_IRQ_STATUS, val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()		bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)	bfin_write16(DMA4_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA5_CONFIG()			bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)		bfin_write16(DMA5_CONFIG, val)
+#define bfin_read_DMA5_NEXT_DESC_PTR()		bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val)	bfin_write32(DMA5_NEXT_DESC_PTR, val)
+#define bfin_read_DMA5_START_ADDR()		bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val)		bfin_write32(DMA5_START_ADDR, val)
+#define bfin_read_DMA5_X_COUNT()		bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)		bfin_write16(DMA5_X_COUNT, val)
+#define bfin_read_DMA5_Y_COUNT()		bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)		bfin_write16(DMA5_Y_COUNT, val)
+#define bfin_read_DMA5_X_MODIFY()		bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)		bfin_write16(DMA5_X_MODIFY, val)
+#define bfin_read_DMA5_Y_MODIFY()		bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)		bfin_write16(DMA5_Y_MODIFY, val)
+#define bfin_read_DMA5_CURR_DESC_PTR()		bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val)	bfin_write32(DMA5_CURR_DESC_PTR, val)
+#define bfin_read_DMA5_CURR_ADDR()		bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val)		bfin_write32(DMA5_CURR_ADDR, val)
+#define bfin_read_DMA5_CURR_X_COUNT()		bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)	bfin_write16(DMA5_CURR_X_COUNT, val)
+#define bfin_read_DMA5_CURR_Y_COUNT()		bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)	bfin_write16(DMA5_CURR_Y_COUNT, val)
+#define bfin_read_DMA5_IRQ_STATUS()		bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)		bfin_write16(DMA5_IRQ_STATUS, val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()		bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)	bfin_write16(DMA5_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA6_CONFIG()			bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)		bfin_write16(DMA6_CONFIG, val)
+#define bfin_read_DMA6_NEXT_DESC_PTR()		bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val)	bfin_write32(DMA6_NEXT_DESC_PTR, val)
+#define bfin_read_DMA6_START_ADDR()		bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val)		bfin_write32(DMA6_START_ADDR, val)
+#define bfin_read_DMA6_X_COUNT()		bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)		bfin_write16(DMA6_X_COUNT, val)
+#define bfin_read_DMA6_Y_COUNT()		bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)		bfin_write16(DMA6_Y_COUNT, val)
+#define bfin_read_DMA6_X_MODIFY()		bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)		bfin_write16(DMA6_X_MODIFY, val)
+#define bfin_read_DMA6_Y_MODIFY()		bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)		bfin_write16(DMA6_Y_MODIFY, val)
+#define bfin_read_DMA6_CURR_DESC_PTR()		bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val)	bfin_write32(DMA6_CURR_DESC_PTR, val)
+#define bfin_read_DMA6_CURR_ADDR()		bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val)		bfin_write32(DMA6_CURR_ADDR, val)
+#define bfin_read_DMA6_CURR_X_COUNT()		bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)	bfin_write16(DMA6_CURR_X_COUNT, val)
+#define bfin_read_DMA6_CURR_Y_COUNT()		bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)	bfin_write16(DMA6_CURR_Y_COUNT, val)
+#define bfin_read_DMA6_IRQ_STATUS()		bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)		bfin_write16(DMA6_IRQ_STATUS, val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()		bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)	bfin_write16(DMA6_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA7_CONFIG()			bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)		bfin_write16(DMA7_CONFIG, val)
+#define bfin_read_DMA7_NEXT_DESC_PTR()		bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val)	bfin_write32(DMA7_NEXT_DESC_PTR, val)
+#define bfin_read_DMA7_START_ADDR()		bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val)		bfin_write32(DMA7_START_ADDR, val)
+#define bfin_read_DMA7_X_COUNT()		bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)		bfin_write16(DMA7_X_COUNT, val)
+#define bfin_read_DMA7_Y_COUNT()		bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)		bfin_write16(DMA7_Y_COUNT, val)
+#define bfin_read_DMA7_X_MODIFY()		bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)		bfin_write16(DMA7_X_MODIFY, val)
+#define bfin_read_DMA7_Y_MODIFY()		bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)		bfin_write16(DMA7_Y_MODIFY, val)
+#define bfin_read_DMA7_CURR_DESC_PTR()		bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val)	bfin_write32(DMA7_CURR_DESC_PTR, val)
+#define bfin_read_DMA7_CURR_ADDR()		bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val)		bfin_write32(DMA7_CURR_ADDR, val)
+#define bfin_read_DMA7_CURR_X_COUNT()		bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)	bfin_write16(DMA7_CURR_X_COUNT, val)
+#define bfin_read_DMA7_CURR_Y_COUNT()		bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)	bfin_write16(DMA7_CURR_Y_COUNT, val)
+#define bfin_read_DMA7_IRQ_STATUS()		bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)		bfin_write16(DMA7_IRQ_STATUS, val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()		bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)	bfin_write16(DMA7_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA8_CONFIG()			bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)		bfin_write16(DMA8_CONFIG, val)
+#define bfin_read_DMA8_NEXT_DESC_PTR()		bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val)	bfin_write32(DMA8_NEXT_DESC_PTR, val)
+#define bfin_read_DMA8_START_ADDR()		bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val)		bfin_write32(DMA8_START_ADDR, val)
+#define bfin_read_DMA8_X_COUNT()		bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)		bfin_write16(DMA8_X_COUNT, val)
+#define bfin_read_DMA8_Y_COUNT()		bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)		bfin_write16(DMA8_Y_COUNT, val)
+#define bfin_read_DMA8_X_MODIFY()		bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val)		bfin_write16(DMA8_X_MODIFY, val)
+#define bfin_read_DMA8_Y_MODIFY()		bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val)		bfin_write16(DMA8_Y_MODIFY, val)
+#define bfin_read_DMA8_CURR_DESC_PTR()		bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val)	bfin_write32(DMA8_CURR_DESC_PTR, val)
+#define bfin_read_DMA8_CURR_ADDR()		bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val)		bfin_write32(DMA8_CURR_ADDR, val)
+#define bfin_read_DMA8_CURR_X_COUNT()		bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val)	bfin_write16(DMA8_CURR_X_COUNT, val)
+#define bfin_read_DMA8_CURR_Y_COUNT()		bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val)	bfin_write16(DMA8_CURR_Y_COUNT, val)
+#define bfin_read_DMA8_IRQ_STATUS()		bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val)		bfin_write16(DMA8_IRQ_STATUS, val)
+#define bfin_read_DMA8_PERIPHERAL_MAP()		bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val)	bfin_write16(DMA8_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA9_CONFIG()			bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)		bfin_write16(DMA9_CONFIG, val)
+#define bfin_read_DMA9_NEXT_DESC_PTR()		bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val)	bfin_write32(DMA9_NEXT_DESC_PTR, val)
+#define bfin_read_DMA9_START_ADDR()		bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val)		bfin_write32(DMA9_START_ADDR, val)
+#define bfin_read_DMA9_X_COUNT()		bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)		bfin_write16(DMA9_X_COUNT, val)
+#define bfin_read_DMA9_Y_COUNT()		bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)		bfin_write16(DMA9_Y_COUNT, val)
+#define bfin_read_DMA9_X_MODIFY()		bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val)		bfin_write16(DMA9_X_MODIFY, val)
+#define bfin_read_DMA9_Y_MODIFY()		bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val)		bfin_write16(DMA9_Y_MODIFY, val)
+#define bfin_read_DMA9_CURR_DESC_PTR()		bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val)	bfin_write32(DMA9_CURR_DESC_PTR, val)
+#define bfin_read_DMA9_CURR_ADDR()		bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val)		bfin_write32(DMA9_CURR_ADDR, val)
+#define bfin_read_DMA9_CURR_X_COUNT()		bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val)	bfin_write16(DMA9_CURR_X_COUNT, val)
+#define bfin_read_DMA9_CURR_Y_COUNT()		bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val)	bfin_write16(DMA9_CURR_Y_COUNT, val)
+#define bfin_read_DMA9_IRQ_STATUS()		bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val)		bfin_write16(DMA9_IRQ_STATUS, val)
+#define bfin_read_DMA9_PERIPHERAL_MAP()		bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val)	bfin_write16(DMA9_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA10_CONFIG()		bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)		bfin_write16(DMA10_CONFIG, val)
+#define bfin_read_DMA10_NEXT_DESC_PTR()		bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val)	bfin_write32(DMA10_NEXT_DESC_PTR, val)
+#define bfin_read_DMA10_START_ADDR()		bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val)	bfin_write32(DMA10_START_ADDR, val)
+#define bfin_read_DMA10_X_COUNT()		bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)		bfin_write16(DMA10_X_COUNT, val)
+#define bfin_read_DMA10_Y_COUNT()		bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)		bfin_write16(DMA10_Y_COUNT, val)
+#define bfin_read_DMA10_X_MODIFY()		bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val)		bfin_write16(DMA10_X_MODIFY, val)
+#define bfin_read_DMA10_Y_MODIFY()		bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val)		bfin_write16(DMA10_Y_MODIFY, val)
+#define bfin_read_DMA10_CURR_DESC_PTR()		bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val)	bfin_write32(DMA10_CURR_DESC_PTR, val)
+#define bfin_read_DMA10_CURR_ADDR()		bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val)		bfin_write32(DMA10_CURR_ADDR, val)
+#define bfin_read_DMA10_CURR_X_COUNT()		bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val)	bfin_write16(DMA10_CURR_X_COUNT, val)
+#define bfin_read_DMA10_CURR_Y_COUNT()		bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val)	bfin_write16(DMA10_CURR_Y_COUNT, val)
+#define bfin_read_DMA10_IRQ_STATUS()		bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val)	bfin_write16(DMA10_IRQ_STATUS, val)
+#define bfin_read_DMA10_PERIPHERAL_MAP()	bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val)	bfin_write16(DMA10_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA11_CONFIG()		bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)		bfin_write16(DMA11_CONFIG, val)
+#define bfin_read_DMA11_NEXT_DESC_PTR()		bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val)	bfin_write32(DMA11_NEXT_DESC_PTR, val)
+#define bfin_read_DMA11_START_ADDR()		bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val)	bfin_write32(DMA11_START_ADDR, val)
+#define bfin_read_DMA11_X_COUNT()		bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)		bfin_write16(DMA11_X_COUNT, val)
+#define bfin_read_DMA11_Y_COUNT()		bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)		bfin_write16(DMA11_Y_COUNT, val)
+#define bfin_read_DMA11_X_MODIFY()		bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val)		bfin_write16(DMA11_X_MODIFY, val)
+#define bfin_read_DMA11_Y_MODIFY()		bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val)		bfin_write16(DMA11_Y_MODIFY, val)
+#define bfin_read_DMA11_CURR_DESC_PTR()		bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val)	bfin_write32(DMA11_CURR_DESC_PTR, val)
+#define bfin_read_DMA11_CURR_ADDR()		bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val)		bfin_write32(DMA11_CURR_ADDR, val)
+#define bfin_read_DMA11_CURR_X_COUNT()		bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val)	bfin_write16(DMA11_CURR_X_COUNT, val)
+#define bfin_read_DMA11_CURR_Y_COUNT()		bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val)	bfin_write16(DMA11_CURR_Y_COUNT, val)
+#define bfin_read_DMA11_IRQ_STATUS()		bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val)	bfin_write16(DMA11_IRQ_STATUS, val)
+#define bfin_read_DMA11_PERIPHERAL_MAP()	bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val)	bfin_write16(DMA11_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_D0_CONFIG()		bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)		bfin_write16(MDMA_D0_CONFIG, val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()	bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val)	bfin_write32(MDMA_D0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D0_START_ADDR()		bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)	bfin_write32(MDMA_D0_START_ADDR, val)
+#define bfin_read_MDMA_D0_X_COUNT()		bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)		bfin_write16(MDMA_D0_X_COUNT, val)
+#define bfin_read_MDMA_D0_Y_COUNT()		bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)		bfin_write16(MDMA_D0_Y_COUNT, val)
+#define bfin_read_MDMA_D0_X_MODIFY()		bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)	bfin_write16(MDMA_D0_X_MODIFY, val)
+#define bfin_read_MDMA_D0_Y_MODIFY()		bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)	bfin_write16(MDMA_D0_Y_MODIFY, val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()	bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val)	bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D0_CURR_ADDR()		bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)	bfin_write32(MDMA_D0_CURR_ADDR, val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()	bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val)	bfin_write16(MDMA_D0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()	bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val)	bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()		bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)	bfin_write16(MDMA_D0_IRQ_STATUS, val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()	bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D0_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_S0_CONFIG()		bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)		bfin_write16(MDMA_S0_CONFIG, val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()	bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val)	bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S0_START_ADDR()		bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)	bfin_write32(MDMA_S0_START_ADDR, val)
+#define bfin_read_MDMA_S0_X_COUNT()		bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)		bfin_write16(MDMA_S0_X_COUNT, val)
+#define bfin_read_MDMA_S0_Y_COUNT()		bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)		bfin_write16(MDMA_S0_Y_COUNT, val)
+#define bfin_read_MDMA_S0_X_MODIFY()		bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)	bfin_write16(MDMA_S0_X_MODIFY, val)
+#define bfin_read_MDMA_S0_Y_MODIFY()		bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)	bfin_write16(MDMA_S0_Y_MODIFY, val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()	bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val)	bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S0_CURR_ADDR()		bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)	bfin_write32(MDMA_S0_CURR_ADDR, val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()	bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val)	bfin_write16(MDMA_S0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()	bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val)	bfin_write16(MDMA_S0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()		bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)	bfin_write16(MDMA_S0_IRQ_STATUS, val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()	bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S0_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_D1_CONFIG()		bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)		bfin_write16(MDMA_D1_CONFIG, val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()	bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val)	bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D1_START_ADDR()		bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)	bfin_write32(MDMA_D1_START_ADDR, val)
+#define bfin_read_MDMA_D1_X_COUNT()		bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)		bfin_write16(MDMA_D1_X_COUNT, val)
+#define bfin_read_MDMA_D1_Y_COUNT()		bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)		bfin_write16(MDMA_D1_Y_COUNT, val)
+#define bfin_read_MDMA_D1_X_MODIFY()		bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)	bfin_write16(MDMA_D1_X_MODIFY, val)
+#define bfin_read_MDMA_D1_Y_MODIFY()		bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)	bfin_write16(MDMA_D1_Y_MODIFY, val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()	bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val)	bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D1_CURR_ADDR()		bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)	bfin_write32(MDMA_D1_CURR_ADDR, val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()	bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val)	bfin_write16(MDMA_D1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()	bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val)	bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()		bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)	bfin_write16(MDMA_D1_IRQ_STATUS, val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()	bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D1_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_S1_CONFIG()		bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)		bfin_write16(MDMA_S1_CONFIG, val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()	bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val)	bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S1_START_ADDR()		bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)	bfin_write32(MDMA_S1_START_ADDR, val)
+#define bfin_read_MDMA_S1_X_COUNT()		bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)		bfin_write16(MDMA_S1_X_COUNT, val)
+#define bfin_read_MDMA_S1_Y_COUNT()		bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)		bfin_write16(MDMA_S1_Y_COUNT, val)
+#define bfin_read_MDMA_S1_X_MODIFY()		bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)	bfin_write16(MDMA_S1_X_MODIFY, val)
+#define bfin_read_MDMA_S1_Y_MODIFY()		bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)	bfin_write16(MDMA_S1_Y_MODIFY, val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()	bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val)	bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S1_CURR_ADDR()		bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)	bfin_write32(MDMA_S1_CURR_ADDR, val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()	bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val)	bfin_write16(MDMA_S1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()	bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val)	bfin_write16(MDMA_S1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()		bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)	bfin_write16(MDMA_S1_IRQ_STATUS, val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()	bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S1_PERIPHERAL_MAP, val)
+
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)							*/
+#define bfin_read_PPI_CONTROL()			bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)		bfin_write16(PPI_CONTROL, val)
+#define bfin_read_PPI_STATUS()			bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)		bfin_write16(PPI_STATUS, val)
+#define bfin_read_PPI_DELAY()			bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)		bfin_write16(PPI_DELAY, val)
+#define bfin_read_PPI_COUNT()			bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)		bfin_write16(PPI_COUNT, val)
+#define bfin_read_PPI_FRAME()			bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)		bfin_write16(PPI_FRAME, val)
+
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)								*/
+#define bfin_read_PORTGIO()			bfin_read16(PORTGIO)
+#define bfin_write_PORTGIO(val)			bfin_write16(PORTGIO, val)
+#define bfin_read_PORTGIO_CLEAR()		bfin_read16(PORTGIO_CLEAR)
+#define bfin_write_PORTGIO_CLEAR(val)		bfin_write16(PORTGIO_CLEAR, val)
+#define bfin_read_PORTGIO_SET()			bfin_read16(PORTGIO_SET)
+#define bfin_write_PORTGIO_SET(val)		bfin_write16(PORTGIO_SET, val)
+#define bfin_read_PORTGIO_TOGGLE()		bfin_read16(PORTGIO_TOGGLE)
+#define bfin_write_PORTGIO_TOGGLE(val)		bfin_write16(PORTGIO_TOGGLE, val)
+#define bfin_read_PORTGIO_MASKA()		bfin_read16(PORTGIO_MASKA)
+#define bfin_write_PORTGIO_MASKA(val)		bfin_write16(PORTGIO_MASKA, val)
+#define bfin_read_PORTGIO_MASKA_CLEAR()		bfin_read16(PORTGIO_MASKA_CLEAR)
+#define bfin_write_PORTGIO_MASKA_CLEAR(val)	bfin_write16(PORTGIO_MASKA_CLEAR, val)
+#define bfin_read_PORTGIO_MASKA_SET()		bfin_read16(PORTGIO_MASKA_SET)
+#define bfin_write_PORTGIO_MASKA_SET(val)	bfin_write16(PORTGIO_MASKA_SET, val)
+#define bfin_read_PORTGIO_MASKA_TOGGLE()	bfin_read16(PORTGIO_MASKA_TOGGLE)
+#define bfin_write_PORTGIO_MASKA_TOGGLE(val)	bfin_write16(PORTGIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTGIO_MASKB()		bfin_read16(PORTGIO_MASKB)
+#define bfin_write_PORTGIO_MASKB(val)		bfin_write16(PORTGIO_MASKB, val)
+#define bfin_read_PORTGIO_MASKB_CLEAR()		bfin_read16(PORTGIO_MASKB_CLEAR)
+#define bfin_write_PORTGIO_MASKB_CLEAR(val)	bfin_write16(PORTGIO_MASKB_CLEAR, val)
+#define bfin_read_PORTGIO_MASKB_SET()		bfin_read16(PORTGIO_MASKB_SET)
+#define bfin_write_PORTGIO_MASKB_SET(val)	bfin_write16(PORTGIO_MASKB_SET, val)
+#define bfin_read_PORTGIO_MASKB_TOGGLE()	bfin_read16(PORTGIO_MASKB_TOGGLE)
+#define bfin_write_PORTGIO_MASKB_TOGGLE(val)	bfin_write16(PORTGIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTGIO_DIR()			bfin_read16(PORTGIO_DIR)
+#define bfin_write_PORTGIO_DIR(val)		bfin_write16(PORTGIO_DIR, val)
+#define bfin_read_PORTGIO_POLAR()		bfin_read16(PORTGIO_POLAR)
+#define bfin_write_PORTGIO_POLAR(val)		bfin_write16(PORTGIO_POLAR, val)
+#define bfin_read_PORTGIO_EDGE()		bfin_read16(PORTGIO_EDGE)
+#define bfin_write_PORTGIO_EDGE(val)		bfin_write16(PORTGIO_EDGE, val)
+#define bfin_read_PORTGIO_BOTH()		bfin_read16(PORTGIO_BOTH)
+#define bfin_write_PORTGIO_BOTH(val)		bfin_write16(PORTGIO_BOTH, val)
+#define bfin_read_PORTGIO_INEN()		bfin_read16(PORTGIO_INEN)
+#define bfin_write_PORTGIO_INEN(val)		bfin_write16(PORTGIO_INEN, val)
+
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)								*/
+#define bfin_read_PORTHIO()			bfin_read16(PORTHIO)
+#define bfin_write_PORTHIO(val)			bfin_write16(PORTHIO, val)
+#define bfin_read_PORTHIO_CLEAR()		bfin_read16(PORTHIO_CLEAR)
+#define bfin_write_PORTHIO_CLEAR(val)		bfin_write16(PORTHIO_CLEAR, val)
+#define bfin_read_PORTHIO_SET()			bfin_read16(PORTHIO_SET)
+#define bfin_write_PORTHIO_SET(val)		bfin_write16(PORTHIO_SET, val)
+#define bfin_read_PORTHIO_TOGGLE()		bfin_read16(PORTHIO_TOGGLE)
+#define bfin_write_PORTHIO_TOGGLE(val)		bfin_write16(PORTHIO_TOGGLE, val)
+#define bfin_read_PORTHIO_MASKA()		bfin_read16(PORTHIO_MASKA)
+#define bfin_write_PORTHIO_MASKA(val)		bfin_write16(PORTHIO_MASKA, val)
+#define bfin_read_PORTHIO_MASKA_CLEAR()		bfin_read16(PORTHIO_MASKA_CLEAR)
+#define bfin_write_PORTHIO_MASKA_CLEAR(val)	bfin_write16(PORTHIO_MASKA_CLEAR, val)
+#define bfin_read_PORTHIO_MASKA_SET()		bfin_read16(PORTHIO_MASKA_SET)
+#define bfin_write_PORTHIO_MASKA_SET(val)	bfin_write16(PORTHIO_MASKA_SET, val)
+#define bfin_read_PORTHIO_MASKA_TOGGLE()	bfin_read16(PORTHIO_MASKA_TOGGLE)
+#define bfin_write_PORTHIO_MASKA_TOGGLE(val)	bfin_write16(PORTHIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTHIO_MASKB()		bfin_read16(PORTHIO_MASKB)
+#define bfin_write_PORTHIO_MASKB(val)		bfin_write16(PORTHIO_MASKB, val)
+#define bfin_read_PORTHIO_MASKB_CLEAR()		bfin_read16(PORTHIO_MASKB_CLEAR)
+#define bfin_write_PORTHIO_MASKB_CLEAR(val)	bfin_write16(PORTHIO_MASKB_CLEAR, val)
+#define bfin_read_PORTHIO_MASKB_SET()		bfin_read16(PORTHIO_MASKB_SET)
+#define bfin_write_PORTHIO_MASKB_SET(val)	bfin_write16(PORTHIO_MASKB_SET, val)
+#define bfin_read_PORTHIO_MASKB_TOGGLE()	bfin_read16(PORTHIO_MASKB_TOGGLE)
+#define bfin_write_PORTHIO_MASKB_TOGGLE(val)	bfin_write16(PORTHIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTHIO_DIR()			bfin_read16(PORTHIO_DIR)
+#define bfin_write_PORTHIO_DIR(val)		bfin_write16(PORTHIO_DIR, val)
+#define bfin_read_PORTHIO_POLAR()		bfin_read16(PORTHIO_POLAR)
+#define bfin_write_PORTHIO_POLAR(val)		bfin_write16(PORTHIO_POLAR, val)
+#define bfin_read_PORTHIO_EDGE()		bfin_read16(PORTHIO_EDGE)
+#define bfin_write_PORTHIO_EDGE(val)		bfin_write16(PORTHIO_EDGE, val)
+#define bfin_read_PORTHIO_BOTH()		bfin_read16(PORTHIO_BOTH)
+#define bfin_write_PORTHIO_BOTH(val)		bfin_write16(PORTHIO_BOTH, val)
+#define bfin_read_PORTHIO_INEN()		bfin_read16(PORTHIO_INEN)
+#define bfin_write_PORTHIO_INEN(val)		bfin_write16(PORTHIO_INEN, val)
+
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define bfin_read_UART1_THR()			bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val)		bfin_write16(UART1_THR, val)
+#define bfin_read_UART1_RBR()			bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val)		bfin_write16(UART1_RBR, val)
+#define bfin_read_UART1_DLL()			bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val)		bfin_write16(UART1_DLL, val)
+#define bfin_read_UART1_IER()			bfin_read16(UART1_IER)
+#define bfin_write_UART1_IER(val)		bfin_write16(UART1_IER, val)
+#define bfin_read_UART1_DLH()			bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val)		bfin_write16(UART1_DLH, val)
+#define bfin_read_UART1_IIR()			bfin_read16(UART1_IIR)
+#define bfin_write_UART1_IIR(val)		bfin_write16(UART1_IIR, val)
+#define bfin_read_UART1_LCR()			bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val)		bfin_write16(UART1_LCR, val)
+#define bfin_read_UART1_MCR()			bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val)		bfin_write16(UART1_MCR, val)
+#define bfin_read_UART1_LSR()			bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val)		bfin_write16(UART1_LSR, val)
+#define bfin_read_UART1_MSR()			bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val)		bfin_write16(UART1_MSR, val)
+#define bfin_read_UART1_SCR()			bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val)		bfin_write16(UART1_SCR, val)
+#define bfin_read_UART1_GCTL()			bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)		bfin_write16(UART1_GCTL, val)
+
+/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF52x processor) */
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)								*/
+#define bfin_read_PORTF_FER()			bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val)		bfin_write16(PORTF_FER, val)
+#define bfin_read_PORTG_FER()			bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val)		bfin_write16(PORTG_FER, val)
+#define bfin_read_PORTH_FER()			bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val)		bfin_write16(PORTH_FER, val)
+#define bfin_read_PORT_MUX()			bfin_read16(PORT_MUX)
+#define bfin_write_PORT_MUX(val)		bfin_write16(PORT_MUX, val)
+
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)								*/
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+/* ==== end from cdefBF534.h ==== */
+
+/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
+
+#define bfin_read_PORTF_MUX()			bfin_read16(PORTF_MUX)
+#define bfin_write_PORTF_MUX(val)		bfin_write16(PORTF_MUX, val)
+#define bfin_read_PORTG_MUX()			bfin_read16(PORTG_MUX)
+#define bfin_write_PORTG_MUX(val)		bfin_write16(PORTG_MUX, val)
+#define bfin_read_PORTH_MUX()			bfin_read16(PORTH_MUX)
+#define bfin_write_PORTH_MUX(val)		bfin_write16(PORTH_MUX, val)
+
+#define bfin_read_PORTF_DRIVE()			bfin_read16(PORTF_DRIVE)
+#define bfin_write_PORTF_DRIVE(val)		bfin_write16(PORTF_DRIVE, val)
+#define bfin_read_PORTG_DRIVE()			bfin_read16(PORTG_DRIVE)
+#define bfin_write_PORTG_DRIVE(val)		bfin_write16(PORTG_DRIVE, val)
+#define bfin_read_PORTH_DRIVE()			bfin_read16(PORTH_DRIVE)
+#define bfin_write_PORTH_DRIVE(val)		bfin_write16(PORTH_DRIVE, val)
+#define bfin_read_PORTF_SLEW()			bfin_read16(PORTF_SLEW)
+#define bfin_write_PORTF_SLEW(val)		bfin_write16(PORTF_SLEW, val)
+#define bfin_read_PORTG_SLEW()			bfin_read16(PORTG_SLEW)
+#define bfin_write_PORTG_SLEW(val)		bfin_write16(PORTG_SLEW, val)
+#define bfin_read_PORTH_SLEW()			bfin_read16(PORTH_SLEW)
+#define bfin_write_PORTH_SLEW(val)		bfin_write16(PORTH_SLEW, val)
+#define bfin_read_PORTF_HYSTERISIS()		bfin_read16(PORTF_HYSTERISIS)
+#define bfin_write_PORTF_HYSTERISIS(val)	bfin_write16(PORTF_HYSTERISIS, val)
+#define bfin_read_PORTG_HYSTERISIS()		bfin_read16(PORTG_HYSTERISIS)
+#define bfin_write_PORTG_HYSTERISIS(val)	bfin_write16(PORTG_HYSTERISIS, val)
+#define bfin_read_PORTH_HYSTERISIS()		bfin_read16(PORTH_HYSTERISIS)
+#define bfin_write_PORTH_HYSTERISIS(val)	bfin_write16(PORTH_HYSTERISIS, val)
+#define bfin_read_MISCPORT_DRIVE()		bfin_read16(MISCPORT_DRIVE)
+#define bfin_write_MISCPORT_DRIVE(val)		bfin_write16(MISCPORT_DRIVE, val)
+#define bfin_read_MISCPORT_SLEW()		bfin_read16(MISCPORT_SLEW)
+#define bfin_write_MISCPORT_SLEW(val)		bfin_write16(MISCPORT_SLEW, val)
+#define bfin_read_MISCPORT_HYSTERISIS()		bfin_read16(MISCPORT_HYSTERISIS)
+#define bfin_write_MISCPORT_HYSTERISIS(val)	bfin_write16(MISCPORT_HYSTERISIS, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()		bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)		bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()			bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)		bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()		bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)		bfin_write16(HOST_TIMEOUT, val)
+
+/* Counter Registers */
+
+#define bfin_read_CNT_CONFIG()			bfin_read16(CNT_CONFIG)
+#define bfin_write_CNT_CONFIG(val)		bfin_write16(CNT_CONFIG, val)
+#define bfin_read_CNT_IMASK()			bfin_read16(CNT_IMASK)
+#define bfin_write_CNT_IMASK(val)		bfin_write16(CNT_IMASK, val)
+#define bfin_read_CNT_STATUS()			bfin_read16(CNT_STATUS)
+#define bfin_write_CNT_STATUS(val)		bfin_write16(CNT_STATUS, val)
+#define bfin_read_CNT_COMMAND()			bfin_read16(CNT_COMMAND)
+#define bfin_write_CNT_COMMAND(val)		bfin_write16(CNT_COMMAND, val)
+#define bfin_read_CNT_DEBOUNCE()		bfin_read16(CNT_DEBOUNCE)
+#define bfin_write_CNT_DEBOUNCE(val)		bfin_write16(CNT_DEBOUNCE, val)
+#define bfin_read_CNT_COUNTER()			bfin_read32(CNT_COUNTER)
+#define bfin_write_CNT_COUNTER(val)		bfin_write32(CNT_COUNTER, val)
+#define bfin_read_CNT_MAX()			bfin_read32(CNT_MAX)
+#define bfin_write_CNT_MAX(val)			bfin_write32(CNT_MAX, val)
+#define bfin_read_CNT_MIN()			bfin_read32(CNT_MIN)
+#define bfin_write_CNT_MIN(val)			bfin_write32(CNT_MIN, val)
+
+/* OTP/FUSE Registers */
+
+#define bfin_read_OTP_CONTROL()			bfin_read16(OTP_CONTROL)
+#define bfin_write_OTP_CONTROL(val)		bfin_write16(OTP_CONTROL, val)
+#define bfin_read_OTP_BEN()			bfin_read16(OTP_BEN)
+#define bfin_write_OTP_BEN(val)			bfin_write16(OTP_BEN, val)
+#define bfin_read_OTP_STATUS()			bfin_read16(OTP_STATUS)
+#define bfin_write_OTP_STATUS(val)		bfin_write16(OTP_STATUS, val)
+#define bfin_read_OTP_TIMING()			bfin_read32(OTP_TIMING)
+#define bfin_write_OTP_TIMING(val)		bfin_write32(OTP_TIMING, val)
+
+/* Security Registers */
+
+#define bfin_read_SECURE_SYSSWT()		bfin_read32(SECURE_SYSSWT)
+#define bfin_write_SECURE_SYSSWT(val)		bfin_write32(SECURE_SYSSWT, val)
+#define bfin_read_SECURE_CONTROL()		bfin_read16(SECURE_CONTROL)
+#define bfin_write_SECURE_CONTROL(val)		bfin_write16(SECURE_CONTROL, val)
+#define bfin_read_SECURE_STATUS()		bfin_read16(SECURE_STATUS)
+#define bfin_write_SECURE_STATUS(val)		bfin_write16(SECURE_STATUS, val)
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define bfin_read_OTP_DATA0()			bfin_read32(OTP_DATA0)
+#define bfin_write_OTP_DATA0(val)		bfin_write32(OTP_DATA0, val)
+#define bfin_read_OTP_DATA1()			bfin_read32(OTP_DATA1)
+#define bfin_write_OTP_DATA1(val)		bfin_write32(OTP_DATA1, val)
+#define bfin_read_OTP_DATA2()			bfin_read32(OTP_DATA2)
+#define bfin_write_OTP_DATA2(val)		bfin_write32(OTP_DATA2, val)
+#define bfin_read_OTP_DATA3()			bfin_read32(OTP_DATA3)
+#define bfin_write_OTP_DATA3(val)		bfin_write32(OTP_DATA3, val)
+
+/* NFC Registers */
+
+#define bfin_read_NFC_CTL()			bfin_read16(NFC_CTL)
+#define bfin_write_NFC_CTL(val)			bfin_write16(NFC_CTL, val)
+#define bfin_read_NFC_STAT()			bfin_read16(NFC_STAT)
+#define bfin_write_NFC_STAT(val)		bfin_write16(NFC_STAT, val)
+#define bfin_read_NFC_IRQSTAT()			bfin_read16(NFC_IRQSTAT)
+#define bfin_write_NFC_IRQSTAT(val)		bfin_write16(NFC_IRQSTAT, val)
+#define bfin_read_NFC_IRQMASK()			bfin_read16(NFC_IRQMASK)
+#define bfin_write_NFC_IRQMASK(val)		bfin_write16(NFC_IRQMASK, val)
+#define bfin_read_NFC_ECC0()			bfin_read16(NFC_ECC0)
+#define bfin_write_NFC_ECC0(val)		bfin_write16(NFC_ECC0, val)
+#define bfin_read_NFC_ECC1()			bfin_read16(NFC_ECC1)
+#define bfin_write_NFC_ECC1(val)		bfin_write16(NFC_ECC1, val)
+#define bfin_read_NFC_ECC2()			bfin_read16(NFC_ECC2)
+#define bfin_write_NFC_ECC2(val)		bfin_write16(NFC_ECC2, val)
+#define bfin_read_NFC_ECC3()			bfin_read16(NFC_ECC3)
+#define bfin_write_NFC_ECC3(val)		bfin_write16(NFC_ECC3, val)
+#define bfin_read_NFC_COUNT()			bfin_read16(NFC_COUNT)
+#define bfin_write_NFC_COUNT(val)		bfin_write16(NFC_COUNT, val)
+#define bfin_read_NFC_RST()			bfin_read16(NFC_RST)
+#define bfin_write_NFC_RST(val)			bfin_write16(NFC_RST, val)
+#define bfin_read_NFC_PGCTL()			bfin_read16(NFC_PGCTL)
+#define bfin_write_NFC_PGCTL(val)		bfin_write16(NFC_PGCTL, val)
+#define bfin_read_NFC_READ()			bfin_read16(NFC_READ)
+#define bfin_write_NFC_READ(val)		bfin_write16(NFC_READ, val)
+#define bfin_read_NFC_ADDR()			bfin_read16(NFC_ADDR)
+#define bfin_write_NFC_ADDR(val)		bfin_write16(NFC_ADDR, val)
+#define bfin_read_NFC_CMD()			bfin_read16(NFC_CMD)
+#define bfin_write_NFC_CMD(val)			bfin_write16(NFC_CMD, val)
+#define bfin_read_NFC_DATA_WR()			bfin_read16(NFC_DATA_WR)
+#define bfin_write_NFC_DATA_WR(val)		bfin_write16(NFC_DATA_WR, val)
+#define bfin_read_NFC_DATA_RD()			bfin_read16(NFC_DATA_RD)
+#define bfin_write_NFC_DATA_RD(val)		bfin_write16(NFC_DATA_RD, val)
+
+#endif /* _CDEF_BF52X_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h
new file mode 100644
index 00000000000..0a8cdcdf0b4
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h
@@ -0,0 +1,42 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/defBF522.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF522_H
+#define _DEF_BF522_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
+
+/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
+#include "defBF52x_base.h"
+
+#endif /* _DEF_BF522_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
new file mode 100644
index 00000000000..5cd7576fef7
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -0,0 +1,713 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/defBF525.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF525_H
+#define _DEF_BF525_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
+
+/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
+#include "defBF52x_base.h"
+
+/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03800   /* Function address register */
+#define                        USB_POWER  0xffc03804   /* Power management register */
+#define                       USB_INTRTX  0xffc03808   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc0380c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03810   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03814   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03818   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc0381c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03820   /* USB frame number */
+#define                        USB_INDEX  0xffc03824   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03828   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc0382c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03830   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03840   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03848   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc0384c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03854   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc0385c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03860   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03868   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03880   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03888   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03890   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03898   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc038a0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc038a8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc038b0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc038b8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03900   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03904   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03908   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03948   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc0394c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03950   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03954   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03958   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc039e0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc039e4   /* Register used to set some calibration values */
+
+#define                  USB_APHY_CNTRL2  0xffc039e8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define                     USB_PHY_TEST  0xffc039ec   /* Used for reducing simulation time and simplifies FIFO testability */
+
+#define                  USB_PLLOSC_CTRL  0xffc039f0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc039f4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03a00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03a04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03a08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03a0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03a10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03a14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03a18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03a1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03a20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+#define               USB_EP_NI0_TXCOUNT  0xffc03a28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+
+/* USB Endpoint 1 Control Registers */
+
+#define                USB_EP_NI1_TXMAXP  0xffc03a40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03a44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03a48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03a4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03a50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03a54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03a58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03a5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03a60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+#define               USB_EP_NI1_TXCOUNT  0xffc03a68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+
+/* USB Endpoint 2 Control Registers */
+
+#define                USB_EP_NI2_TXMAXP  0xffc03a80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03a84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03a88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03a8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03a90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03a94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03a98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03a9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03aa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+#define               USB_EP_NI2_TXCOUNT  0xffc03aa8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+
+/* USB Endpoint 3 Control Registers */
+
+#define                USB_EP_NI3_TXMAXP  0xffc03ac0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ac4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ac8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03acc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ad0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ad4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ad8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03adc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ae0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+#define               USB_EP_NI3_TXCOUNT  0xffc03ae8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+
+/* USB Endpoint 4 Control Registers */
+
+#define                USB_EP_NI4_TXMAXP  0xffc03b00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03b04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03b08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03b0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03b10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03b14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03b18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03b1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03b20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+#define               USB_EP_NI4_TXCOUNT  0xffc03b28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+
+/* USB Endpoint 5 Control Registers */
+
+#define                USB_EP_NI5_TXMAXP  0xffc03b40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03b44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03b48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03b4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03b50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03b54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03b58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03b5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03b60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+#define               USB_EP_NI5_TXCOUNT  0xffc03b68   /* Number of bytes to be written to the endpoint5 Tx FIFO */
+
+/* USB Endpoint 6 Control Registers */
+
+#define                USB_EP_NI6_TXMAXP  0xffc03b80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03b84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03b88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03b8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03b90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03b94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03b98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03b9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03ba0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+#define               USB_EP_NI6_TXCOUNT  0xffc03ba8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+
+/* USB Endpoint 7 Control Registers */
+
+#define                USB_EP_NI7_TXMAXP  0xffc03bc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03bc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03bc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03bcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03bd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03bd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03bd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03bdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03bf0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03bf8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+
+#define                USB_DMA_INTERRUPT  0xffc03c00   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc03c04   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc03c08   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc03c0c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc03c10   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc03c14   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc03c24   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc03c28   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc03c2c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc03c30   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc03c34   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc03c44   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc03c48   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc03c4c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc03c50   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc03c54   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc03c64   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc03c68   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc03c6c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc03c70   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc03c74   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc03c84   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc03c88   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc03c8c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc03c90   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc03c94   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc03ca4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc03ca8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc03cac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc03cb0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc03cb4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc03cc4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc03cc8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc03ccc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc03cd0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc03cd4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc03ce4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc03ce8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc03cec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc03cf0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc03cf4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define          nENABLE_SUSPENDM  0x0       
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define             nSUSPEND_MODE  0x0       
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define              nRESUME_MODE  0x0       
+#define                     RESET  0x8        /* Reset indicator */
+#define                    nRESET  0x0       
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                  nHS_MODE  0x0       
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                nHS_ENABLE  0x0       
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                nSOFT_CONN  0x0       
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+#define               nISO_UPDATE  0x0       
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                   nEP0_TX  0x0       
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                   nEP1_TX  0x0       
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                   nEP2_TX  0x0       
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                   nEP3_TX  0x0       
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                   nEP4_TX  0x0       
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                   nEP5_TX  0x0       
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                   nEP6_TX  0x0       
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+#define                   nEP7_TX  0x0       
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                   nEP1_RX  0x0       
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                   nEP2_RX  0x0       
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                   nEP3_RX  0x0       
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                   nEP4_RX  0x0       
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                   nEP5_RX  0x0       
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                   nEP6_RX  0x0       
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+#define                   nEP7_RX  0x0       
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                 nEP0_TX_E  0x0       
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                 nEP1_TX_E  0x0       
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                 nEP2_TX_E  0x0       
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                 nEP3_TX_E  0x0       
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                 nEP4_TX_E  0x0       
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                 nEP5_TX_E  0x0       
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                 nEP6_TX_E  0x0       
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+#define                 nEP7_TX_E  0x0       
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                 nEP1_RX_E  0x0       
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                 nEP2_RX_E  0x0       
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                 nEP3_RX_E  0x0       
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                 nEP4_RX_E  0x0       
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                 nEP5_RX_E  0x0       
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                 nEP6_RX_E  0x0       
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+#define                 nEP7_RX_E  0x0       
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                nSUSPEND_B  0x0       
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define                 nRESUME_B  0x0       
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define         nRESET_OR_BABLE_B  0x0       
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    nSOF_B  0x0       
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                   nCONN_B  0x0       
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define                 nDISCON_B  0x0       
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define            nSESSION_REQ_B  0x0       
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+#define             nVBUS_ERROR_B  0x0       
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define               nSUSPEND_BE  0x0       
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define                nRESUME_BE  0x0       
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define        nRESET_OR_BABLE_BE  0x0       
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   nSOF_BE  0x0       
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                  nCONN_BE  0x0       
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define                nDISCON_BE  0x0       
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define           nSESSION_REQ_BE  0x0       
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+#define            nVBUS_ERROR_BE  0x0       
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define               nGLOBAL_ENA  0x0       
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define               nEP1_TX_ENA  0x0       
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define               nEP2_TX_ENA  0x0       
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define               nEP3_TX_ENA  0x0       
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define               nEP4_TX_ENA  0x0       
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define               nEP5_TX_ENA  0x0       
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define               nEP6_TX_ENA  0x0       
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define               nEP7_TX_ENA  0x0       
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define               nEP1_RX_ENA  0x0       
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define               nEP2_RX_ENA  0x0       
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define               nEP3_RX_ENA  0x0       
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define               nEP4_RX_ENA  0x0       
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define               nEP5_RX_ENA  0x0       
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define               nEP6_RX_ENA  0x0       
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+#define               nEP7_RX_ENA  0x0       
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  nSESSION  0x0       
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 nHOST_REQ  0x0       
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                nHOST_MODE  0x0       
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                    nVBUS0  0x0       
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                    nVBUS1  0x0       
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                    nLSDEV  0x0       
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                    nFSDEV  0x0       
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+#define                 nB_DEVICE  0x0       
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            nDRIVE_VBUS_ON  0x0       
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           nDRIVE_VBUS_OFF  0x0       
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define          nCHRG_VBUS_START  0x0       
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define            nCHRG_VBUS_END  0x0       
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define       nDISCHRG_VBUS_START  0x0       
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+#define         nDISCHRG_VBUS_END  0x0       
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        nDRIVE_VBUS_ON_ENA  0x0       
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       nDRIVE_VBUS_OFF_ENA  0x0       
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define      nCHRG_VBUS_START_ENA  0x0       
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define        nCHRG_VBUS_END_ENA  0x0       
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define   nDISCHRG_VBUS_START_ENA  0x0       
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+#define     nDISCHRG_VBUS_END_ENA  0x0       
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                 nRXPKTRDY  0x0       
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                 nTXPKTRDY  0x0       
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define               nSTALL_SENT  0x0       
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  nDATAEND  0x0       
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 nSETUPEND  0x0       
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define                nSENDSTALL  0x0       
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define        nSERVICED_RXPKTRDY  0x0       
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define        nSERVICED_SETUPEND  0x0       
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define                nFLUSHFIFO  0x0       
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define         nSTALL_RECEIVED_H  0x0       
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define               nSETUPPKT_H  0x0       
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  nERROR_H  0x0       
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define                 nREQPKT_H  0x0       
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define              nSTATUSPKT_H  0x0       
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+#define            nNAK_TIMEOUT_H  0x0       
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define               nTXPKTRDY_T  0x0       
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define         nFIFO_NOT_EMPTY_T  0x0       
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               nUNDERRUN_T  0x0       
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              nFLUSHFIFO_T  0x0       
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define             nSTALL_SEND_T  0x0       
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define             nSTALL_SENT_T  0x0       
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define       nCLEAR_DATATOGGLE_T  0x0       
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define               nINCOMPTX_T  0x0       
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define             nDMAREQMODE_T  0x0       
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define       nFORCE_DATATOGGLE_T  0x0       
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define             nDMAREQ_ENA_T  0x0       
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                    nISO_T  0x0       
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                nAUTOSET_T  0x0       
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define                 nERROR_TH  0x0       
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define        nSTALL_RECEIVED_TH  0x0       
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+#define           nNAK_TIMEOUT_TH  0x0       
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               nRXPKTRDY_R  0x0       
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define              nFIFO_FULL_R  0x0       
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define                nOVERRUN_R  0x0       
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define              nDATAERROR_R  0x0       
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              nFLUSHFIFO_R  0x0       
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define             nSTALL_SEND_R  0x0       
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define             nSTALL_SENT_R  0x0       
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define       nCLEAR_DATATOGGLE_R  0x0       
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define               nINCOMPRX_R  0x0       
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define             nDMAREQMODE_R  0x0       
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define                nDISNYET_R  0x0       
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define             nDMAREQ_ENA_R  0x0       
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define                    nISO_R  0x0       
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define              nAUTOCLEAR_R  0x0       
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 nERROR_RH  0x0       
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define                nREQPKT_RH  0x0       
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define        nSTALL_RECEIVED_RH  0x0       
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define              nINCOMPRX_RH  0x0       
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define            nDMAREQMODE_RH  0x0       
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+#define               nAUTOREQ_RH  0x0       
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                 nDMA0_INT  0x0       
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                 nDMA1_INT  0x0       
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                 nDMA2_INT  0x0       
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                 nDMA3_INT  0x0       
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                 nDMA4_INT  0x0       
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                 nDMA5_INT  0x0       
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                 nDMA6_INT  0x0       
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+#define                 nDMA7_INT  0x0       
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                  nDMA_ENA  0x0       
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                nDIRECTION  0x0       
+#define                      MODE  0x4        /* DMA Bus error */
+#define                     nMODE  0x0       
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                  nINT_ENA  0x0       
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+#define                 nBUSERROR  0x0       
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+#endif /* _DEF_BF525_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
new file mode 100644
index 00000000000..f040f364afa
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -0,0 +1,1090 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/defBF527.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF527_H
+#define _DEF_BF527_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
+
+/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
+#include "defBF52x_base.h"
+
+/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
+
+#define EMAC_OPMODE             0xFFC03000       /* Operating Mode Register                              */
+#define EMAC_ADDRLO             0xFFC03004       /* Address Low (32 LSBs) Register                       */
+#define EMAC_ADDRHI             0xFFC03008       /* Address High (16 MSBs) Register                      */
+#define EMAC_HASHLO             0xFFC0300C       /* Multicast Hash Table Low (Bins 31-0) Register        */
+#define EMAC_HASHHI             0xFFC03010       /* Multicast Hash Table High (Bins 63-32) Register      */
+#define EMAC_STAADD             0xFFC03014       /* Station Management Address Register                  */
+#define EMAC_STADAT             0xFFC03018       /* Station Management Data Register                     */
+#define EMAC_FLC                0xFFC0301C       /* Flow Control Register                                */
+#define EMAC_VLAN1              0xFFC03020       /* VLAN1 Tag Register                                   */
+#define EMAC_VLAN2              0xFFC03024       /* VLAN2 Tag Register                                   */
+#define EMAC_WKUP_CTL           0xFFC0302C       /* Wake-Up Control/Status Register                      */
+#define EMAC_WKUP_FFMSK0        0xFFC03030       /* Wake-Up Frame Filter 0 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK1        0xFFC03034       /* Wake-Up Frame Filter 1 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK2        0xFFC03038       /* Wake-Up Frame Filter 2 Byte Mask Register            */
+#define EMAC_WKUP_FFMSK3        0xFFC0303C       /* Wake-Up Frame Filter 3 Byte Mask Register            */
+#define EMAC_WKUP_FFCMD         0xFFC03040       /* Wake-Up Frame Filter Commands Register               */
+#define EMAC_WKUP_FFOFF         0xFFC03044       /* Wake-Up Frame Filter Offsets Register                */
+#define EMAC_WKUP_FFCRC0        0xFFC03048       /* Wake-Up Frame Filter 0,1 CRC-16 Register             */
+#define EMAC_WKUP_FFCRC1        0xFFC0304C       /* Wake-Up Frame Filter 2,3 CRC-16 Register             */
+
+#define EMAC_SYSCTL             0xFFC03060       /* EMAC System Control Register                         */
+#define EMAC_SYSTAT             0xFFC03064       /* EMAC System Status Register                          */
+#define EMAC_RX_STAT            0xFFC03068       /* RX Current Frame Status Register                     */
+#define EMAC_RX_STKY            0xFFC0306C       /* RX Sticky Frame Status Register                      */
+#define EMAC_RX_IRQE            0xFFC03070       /* RX Frame Status Interrupt Enables Register           */
+#define EMAC_TX_STAT            0xFFC03074       /* TX Current Frame Status Register                     */
+#define EMAC_TX_STKY            0xFFC03078       /* TX Sticky Frame Status Register                      */
+#define EMAC_TX_IRQE            0xFFC0307C       /* TX Frame Status Interrupt Enables Register           */
+
+#define EMAC_MMC_CTL            0xFFC03080       /* MMC Counter Control Register                         */
+#define EMAC_MMC_RIRQS          0xFFC03084       /* MMC RX Interrupt Status Register                     */
+#define EMAC_MMC_RIRQE          0xFFC03088       /* MMC RX Interrupt Enables Register                    */
+#define EMAC_MMC_TIRQS          0xFFC0308C       /* MMC TX Interrupt Status Register                     */
+#define EMAC_MMC_TIRQE          0xFFC03090       /* MMC TX Interrupt Enables Register                    */
+
+#define EMAC_RXC_OK             0xFFC03100       /* RX Frame Successful Count                            */
+#define EMAC_RXC_FCS            0xFFC03104       /* RX Frame FCS Failure Count                           */
+#define EMAC_RXC_ALIGN          0xFFC03108       /* RX Alignment Error Count                             */
+#define EMAC_RXC_OCTET          0xFFC0310C       /* RX Octets Successfully Received Count                */
+#define EMAC_RXC_DMAOVF         0xFFC03110       /* Internal MAC Sublayer Error RX Frame Count           */
+#define EMAC_RXC_UNICST         0xFFC03114       /* Unicast RX Frame Count                               */
+#define EMAC_RXC_MULTI          0xFFC03118       /* Multicast RX Frame Count                             */
+#define EMAC_RXC_BROAD          0xFFC0311C       /* Broadcast RX Frame Count                             */
+#define EMAC_RXC_LNERRI         0xFFC03120       /* RX Frame In Range Error Count                        */
+#define EMAC_RXC_LNERRO         0xFFC03124       /* RX Frame Out Of Range Error Count                    */
+#define EMAC_RXC_LONG           0xFFC03128       /* RX Frame Too Long Count                              */
+#define EMAC_RXC_MACCTL         0xFFC0312C       /* MAC Control RX Frame Count                           */
+#define EMAC_RXC_OPCODE         0xFFC03130       /* Unsupported Op-Code RX Frame Count                   */
+#define EMAC_RXC_PAUSE          0xFFC03134       /* MAC Control Pause RX Frame Count                     */
+#define EMAC_RXC_ALLFRM         0xFFC03138       /* Overall RX Frame Count                               */
+#define EMAC_RXC_ALLOCT         0xFFC0313C       /* Overall RX Octet Count                               */
+#define EMAC_RXC_TYPED          0xFFC03140       /* Type/Length Consistent RX Frame Count                */
+#define EMAC_RXC_SHORT          0xFFC03144       /* RX Frame Fragment Count - Byte Count x < 64          */
+#define EMAC_RXC_EQ64           0xFFC03148       /* Good RX Frame Count - Byte Count x = 64              */
+#define EMAC_RXC_LT128          0xFFC0314C       /* Good RX Frame Count - Byte Count  64 < x < 128       */
+#define EMAC_RXC_LT256          0xFFC03150       /* Good RX Frame Count - Byte Count 128 <= x < 256      */
+#define EMAC_RXC_LT512          0xFFC03154       /* Good RX Frame Count - Byte Count 256 <= x < 512      */
+#define EMAC_RXC_LT1024         0xFFC03158       /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
+#define EMAC_RXC_GE1024         0xFFC0315C       /* Good RX Frame Count - Byte Count x >= 1024           */
+
+#define EMAC_TXC_OK             0xFFC03180       /* TX Frame Successful Count                             */
+#define EMAC_TXC_1COL           0xFFC03184       /* TX Frames Successful After Single Collision Count     */
+#define EMAC_TXC_GT1COL         0xFFC03188       /* TX Frames Successful After Multiple Collisions Count  */
+#define EMAC_TXC_OCTET          0xFFC0318C       /* TX Octets Successfully Received Count                 */
+#define EMAC_TXC_DEFER          0xFFC03190       /* TX Frame Delayed Due To Busy Count                    */
+#define EMAC_TXC_LATECL         0xFFC03194       /* Late TX Collisions Count                              */
+#define EMAC_TXC_XS_COL         0xFFC03198       /* TX Frame Failed Due To Excessive Collisions Count     */
+#define EMAC_TXC_DMAUND         0xFFC0319C       /* Internal MAC Sublayer Error TX Frame Count            */
+#define EMAC_TXC_CRSERR         0xFFC031A0       /* Carrier Sense Deasserted During TX Frame Count        */
+#define EMAC_TXC_UNICST         0xFFC031A4       /* Unicast TX Frame Count                                */
+#define EMAC_TXC_MULTI          0xFFC031A8       /* Multicast TX Frame Count                              */
+#define EMAC_TXC_BROAD          0xFFC031AC       /* Broadcast TX Frame Count                              */
+#define EMAC_TXC_XS_DFR         0xFFC031B0       /* TX Frames With Excessive Deferral Count               */
+#define EMAC_TXC_MACCTL         0xFFC031B4       /* MAC Control TX Frame Count                            */
+#define EMAC_TXC_ALLFRM         0xFFC031B8       /* Overall TX Frame Count                                */
+#define EMAC_TXC_ALLOCT         0xFFC031BC       /* Overall TX Octet Count                                */
+#define EMAC_TXC_EQ64           0xFFC031C0       /* Good TX Frame Count - Byte Count x = 64               */
+#define EMAC_TXC_LT128          0xFFC031C4       /* Good TX Frame Count - Byte Count  64 < x < 128        */
+#define EMAC_TXC_LT256          0xFFC031C8       /* Good TX Frame Count - Byte Count 128 <= x < 256       */
+#define EMAC_TXC_LT512          0xFFC031CC       /* Good TX Frame Count - Byte Count 256 <= x < 512       */
+#define EMAC_TXC_LT1024         0xFFC031D0       /* Good TX Frame Count - Byte Count 512 <= x < 1024      */
+#define EMAC_TXC_GE1024         0xFFC031D4       /* Good TX Frame Count - Byte Count x >= 1024            */
+#define EMAC_TXC_ABORT          0xFFC031D8       /* Total TX Frames Aborted Count                         */
+
+/* Listing for IEEE-Supported Count Registers */
+
+#define FramesReceivedOK                EMAC_RXC_OK        /* RX Frame Successful Count                            */
+#define FrameCheckSequenceErrors        EMAC_RXC_FCS       /* RX Frame FCS Failure Count                           */
+#define AlignmentErrors                 EMAC_RXC_ALIGN     /* RX Alignment Error Count                             */
+#define OctetsReceivedOK                EMAC_RXC_OCTET     /* RX Octets Successfully Received Count                */
+#define FramesLostDueToIntMACRcvError   EMAC_RXC_DMAOVF    /* Internal MAC Sublayer Error RX Frame Count           */
+#define UnicastFramesReceivedOK         EMAC_RXC_UNICST    /* Unicast RX Frame Count                               */
+#define MulticastFramesReceivedOK       EMAC_RXC_MULTI     /* Multicast RX Frame Count                             */
+#define BroadcastFramesReceivedOK       EMAC_RXC_BROAD     /* Broadcast RX Frame Count                             */
+#define InRangeLengthErrors             EMAC_RXC_LNERRI    /* RX Frame In Range Error Count                        */
+#define OutOfRangeLengthField           EMAC_RXC_LNERRO    /* RX Frame Out Of Range Error Count                    */
+#define FrameTooLongErrors              EMAC_RXC_LONG      /* RX Frame Too Long Count                              */
+#define MACControlFramesReceived        EMAC_RXC_MACCTL    /* MAC Control RX Frame Count                           */
+#define UnsupportedOpcodesReceived      EMAC_RXC_OPCODE    /* Unsupported Op-Code RX Frame Count                   */
+#define PAUSEMACCtrlFramesReceived      EMAC_RXC_PAUSE     /* MAC Control Pause RX Frame Count                     */
+#define FramesReceivedAll               EMAC_RXC_ALLFRM    /* Overall RX Frame Count                               */
+#define OctetsReceivedAll               EMAC_RXC_ALLOCT    /* Overall RX Octet Count                               */
+#define TypedFramesReceived             EMAC_RXC_TYPED     /* Type/Length Consistent RX Frame Count                */
+#define FramesLenLt64Received           EMAC_RXC_SHORT     /* RX Frame Fragment Count - Byte Count x < 64          */
+#define FramesLenEq64Received           EMAC_RXC_EQ64      /* Good RX Frame Count - Byte Count x = 64              */
+#define FramesLen65_127Received         EMAC_RXC_LT128     /* Good RX Frame Count - Byte Count  64 < x < 128       */
+#define FramesLen128_255Received        EMAC_RXC_LT256     /* Good RX Frame Count - Byte Count 128 <= x < 256      */
+#define FramesLen256_511Received        EMAC_RXC_LT512     /* Good RX Frame Count - Byte Count 256 <= x < 512      */
+#define FramesLen512_1023Received       EMAC_RXC_LT1024    /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
+#define FramesLen1024_MaxReceived       EMAC_RXC_GE1024    /* Good RX Frame Count - Byte Count x >= 1024           */
+
+#define FramesTransmittedOK             EMAC_TXC_OK        /* TX Frame Successful Count                            */
+#define SingleCollisionFrames           EMAC_TXC_1COL      /* TX Frames Successful After Single Collision Count    */
+#define MultipleCollisionFrames         EMAC_TXC_GT1COL    /* TX Frames Successful After Multiple Collisions Count */
+#define OctetsTransmittedOK             EMAC_TXC_OCTET     /* TX Octets Successfully Received Count                */
+#define FramesWithDeferredXmissions     EMAC_TXC_DEFER     /* TX Frame Delayed Due To Busy Count                   */
+#define LateCollisions                  EMAC_TXC_LATECL    /* Late TX Collisions Count                             */
+#define FramesAbortedDueToXSColls       EMAC_TXC_XS_COL    /* TX Frame Failed Due To Excessive Collisions Count    */
+#define FramesLostDueToIntMacXmitError  EMAC_TXC_DMAUND    /* Internal MAC Sublayer Error TX Frame Count           */
+#define CarrierSenseErrors              EMAC_TXC_CRSERR    /* Carrier Sense Deasserted During TX Frame Count       */
+#define UnicastFramesXmittedOK          EMAC_TXC_UNICST    /* Unicast TX Frame Count                               */
+#define MulticastFramesXmittedOK        EMAC_TXC_MULTI     /* Multicast TX Frame Count                             */
+#define BroadcastFramesXmittedOK        EMAC_TXC_BROAD     /* Broadcast TX Frame Count                             */
+#define FramesWithExcessiveDeferral     EMAC_TXC_XS_DFR    /* TX Frames With Excessive Deferral Count              */
+#define MACControlFramesTransmitted     EMAC_TXC_MACCTL    /* MAC Control TX Frame Count                           */
+#define FramesTransmittedAll            EMAC_TXC_ALLFRM    /* Overall TX Frame Count                               */
+#define OctetsTransmittedAll            EMAC_TXC_ALLOCT    /* Overall TX Octet Count                               */
+#define FramesLenEq64Transmitted        EMAC_TXC_EQ64      /* Good TX Frame Count - Byte Count x = 64              */
+#define FramesLen65_127Transmitted      EMAC_TXC_LT128     /* Good TX Frame Count - Byte Count  64 < x < 128       */
+#define FramesLen128_255Transmitted     EMAC_TXC_LT256     /* Good TX Frame Count - Byte Count 128 <= x < 256      */
+#define FramesLen256_511Transmitted     EMAC_TXC_LT512     /* Good TX Frame Count - Byte Count 256 <= x < 512      */
+#define FramesLen512_1023Transmitted    EMAC_TXC_LT1024    /* Good TX Frame Count - Byte Count 512 <= x < 1024     */
+#define FramesLen1024_MaxTransmitted    EMAC_TXC_GE1024    /* Good TX Frame Count - Byte Count x >= 1024           */
+#define TxAbortedFrames                 EMAC_TXC_ABORT     /* Total TX Frames Aborted Count                        */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+
+/************************  ETHERNET 10/100 CONTROLLER MASKS  ************************/
+
+/* EMAC_OPMODE Masks */
+
+#define	RE                 0x00000001     /* Receiver Enable                                    */
+#define	ASTP               0x00000002     /* Enable Automatic Pad Stripping On RX Frames        */
+#define	HU                 0x00000010     /* Hash Filter Unicast Address                        */
+#define	HM                 0x00000020     /* Hash Filter Multicast Address                      */
+#define	PAM                0x00000040     /* Pass-All-Multicast Mode Enable                     */
+#define	PR                 0x00000080     /* Promiscuous Mode Enable                            */
+#define	IFE                0x00000100     /* Inverse Filtering Enable                           */
+#define	DBF                0x00000200     /* Disable Broadcast Frame Reception                  */
+#define	PBF                0x00000400     /* Pass Bad Frames Enable                             */
+#define	PSF                0x00000800     /* Pass Short Frames Enable                           */
+#define	RAF                0x00001000     /* Receive-All Mode                                   */
+#define	TE                 0x00010000     /* Transmitter Enable                                 */
+#define	DTXPAD             0x00020000     /* Disable Automatic TX Padding                       */
+#define	DTXCRC             0x00040000     /* Disable Automatic TX CRC Generation                */
+#define	DC                 0x00080000     /* Deferral Check                                     */
+#define	BOLMT              0x00300000     /* Back-Off Limit                                     */
+#define	BOLMT_10           0x00000000     /*		10-bit range                            */
+#define	BOLMT_8            0x00100000     /*		8-bit range                             */
+#define	BOLMT_4            0x00200000     /*		4-bit range                             */
+#define	BOLMT_1            0x00300000     /*		1-bit range                             */
+#define	DRTY               0x00400000     /* Disable TX Retry On Collision                      */
+#define	LCTRE              0x00800000     /* Enable TX Retry On Late Collision                  */
+#define	RMII               0x01000000     /* RMII/MII* Mode                                     */
+#define	RMII_10            0x02000000     /* Speed Select for RMII Port (10MBit/100MBit*)       */
+#define	FDMODE             0x04000000     /* Duplex Mode Enable (Full/Half*)                    */
+#define	LB                 0x08000000     /* Internal Loopback Enable                           */
+#define	DRO                0x10000000     /* Disable Receive Own Frames (Half-Duplex Mode)      */
+
+/* EMAC_STAADD Masks */
+
+#define	STABUSY            0x00000001     /* Initiate Station Mgt Reg Access / STA Busy Stat    */
+#define	STAOP              0x00000002     /* Station Management Operation Code (Write/Read*)    */
+#define	STADISPRE          0x00000004     /* Disable Preamble Generation                        */
+#define	STAIE              0x00000008     /* Station Mgt. Transfer Done Interrupt Enable        */
+#define	REGAD              0x000007C0     /* STA Register Address                               */
+#define	PHYAD              0x0000F800     /* PHY Device Address                                 */
+
+#define	SET_REGAD(x) (((x)&0x1F)<<  6 )   /* Set STA Register Address                           */
+#define	SET_PHYAD(x) (((x)&0x1F)<< 11 )   /* Set PHY Device Address                             */
+
+/* EMAC_STADAT Mask */
+
+#define	STADATA            0x0000FFFF     /* Station Management Data                            */
+
+/* EMAC_FLC Masks */
+
+#define	FLCBUSY            0x00000001     /* Send Flow Ctrl Frame / Flow Ctrl Busy Status       */
+#define	FLCE               0x00000002     /* Flow Control Enable                                */
+#define	PCF                0x00000004     /* Pass Control Frames                                */
+#define	BKPRSEN            0x00000008     /* Enable Backpressure                                */
+#define	FLCPAUSE           0xFFFF0000     /* Pause Time                                         */
+
+#define	SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time                                   */
+
+/* EMAC_WKUP_CTL Masks */
+
+#define	CAPWKFRM           0x00000001    /* Capture Wake-Up Frames                              */
+#define	MPKE               0x00000002    /* Magic Packet Enable                                 */
+#define	RWKE               0x00000004    /* Remote Wake-Up Frame Enable                         */
+#define	GUWKE              0x00000008    /* Global Unicast Wake Enable                          */
+#define	MPKS               0x00000020    /* Magic Packet Received Status                        */
+#define	RWKS               0x00000F00    /* Wake-Up Frame Received Status, Filters 3:0          */
+
+/* EMAC_WKUP_FFCMD Masks */
+
+#define	WF0_E              0x00000001    /* Enable Wake-Up Filter 0                              */
+#define	WF0_T              0x00000008    /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*)      */
+#define	WF1_E              0x00000100    /* Enable Wake-Up Filter 1                              */
+#define	WF1_T              0x00000800    /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*)      */
+#define	WF2_E              0x00010000    /* Enable Wake-Up Filter 2                              */
+#define	WF2_T              0x00080000    /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*)      */
+#define	WF3_E              0x01000000    /* Enable Wake-Up Filter 3                              */
+#define	WF3_T              0x08000000    /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*)      */
+
+/* EMAC_WKUP_FFOFF Masks */
+
+#define	WF0_OFF            0x000000FF    /* Wake-Up Filter 0 Pattern Offset                      */
+#define	WF1_OFF            0x0000FF00    /* Wake-Up Filter 1 Pattern Offset                      */
+#define	WF2_OFF            0x00FF0000    /* Wake-Up Filter 2 Pattern Offset                      */
+#define	WF3_OFF            0xFF000000    /* Wake-Up Filter 3 Pattern Offset                      */
+
+#define	SET_WF0_OFF(x) (((x)&0xFF)<<  0 ) /* Set Wake-Up Filter 0 Byte Offset                    */
+#define	SET_WF1_OFF(x) (((x)&0xFF)<<  8 ) /* Set Wake-Up Filter 1 Byte Offset                    */
+#define	SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset                    */
+#define	SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset                    */
+/* Set ALL Offsets */
+#define	SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks */
+
+#define	WF0_CRC           0x0000FFFF    /* Wake-Up Filter 0 Pattern CRC                           */
+#define	WF1_CRC           0xFFFF0000    /* Wake-Up Filter 1 Pattern CRC                           */
+
+#define	SET_WF0_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 0 Target CRC                   */
+#define	SET_WF1_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 1 Target CRC                   */
+
+/* EMAC_WKUP_FFCRC1 Masks */
+
+#define	WF2_CRC           0x0000FFFF    /* Wake-Up Filter 2 Pattern CRC                           */
+#define	WF3_CRC           0xFFFF0000    /* Wake-Up Filter 3 Pattern CRC                           */
+
+#define	SET_WF2_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 2 Target CRC                   */
+#define	SET_WF3_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 3 Target CRC                   */
+
+/* EMAC_SYSCTL Masks */
+
+#define	PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
+#define	RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
+#define	RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
+#define	TXDWA             0x00000010    /* Transmit Frame DMA Word Alignment (Odd/Even*)          */
+#define	MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
+
+#define	SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
+
+/* EMAC_SYSTAT Masks */
+
+#define	PHYINT            0x00000001    /* PHY_INT Interrupt Status                               */
+#define	MMCINT            0x00000002    /* MMC Counter Interrupt Status                           */
+#define	RXFSINT           0x00000004    /* RX Frame-Status Interrupt Status                       */
+#define	TXFSINT           0x00000008    /* TX Frame-Status Interrupt Status                       */
+#define	WAKEDET           0x00000010    /* Wake-Up Detected Status                                */
+#define	RXDMAERR          0x00000020    /* RX DMA Direction Error Status                          */
+#define	TXDMAERR          0x00000040    /* TX DMA Direction Error Status                          */
+#define	STMDONE           0x00000080    /* Station Mgt. Transfer Done Interrupt Status            */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
+
+#define	RX_FRLEN          0x000007FF    /* Frame Length In Bytes                                  */
+#define	RX_COMP           0x00001000    /* RX Frame Complete                                      */
+#define	RX_OK             0x00002000    /* RX Frame Received With No Errors                       */
+#define	RX_LONG           0x00004000    /* RX Frame Too Long Error                                */
+#define	RX_ALIGN          0x00008000    /* RX Frame Alignment Error                               */
+#define	RX_CRC            0x00010000    /* RX Frame CRC Error                                     */
+#define	RX_LEN            0x00020000    /* RX Frame Length Error                                  */
+#define	RX_FRAG           0x00040000    /* RX Frame Fragment Error                                */
+#define	RX_ADDR           0x00080000    /* RX Frame Address Filter Failed Error                   */
+#define	RX_DMAO           0x00100000    /* RX Frame DMA Overrun Error                             */
+#define	RX_PHY            0x00200000    /* RX Frame PHY Error                                     */
+#define	RX_LATE           0x00400000    /* RX Frame Late Collision Error                          */
+#define	RX_RANGE          0x00800000    /* RX Frame Length Field Out of Range Error               */
+#define	RX_MULTI          0x01000000    /* RX Multicast Frame Indicator                           */
+#define	RX_BROAD          0x02000000    /* RX Broadcast Frame Indicator                           */
+#define	RX_CTL            0x04000000    /* RX Control Frame Indicator                             */
+#define	RX_UCTL           0x08000000    /* Unsupported RX Control Frame Indicator                 */
+#define	RX_TYPE           0x10000000    /* RX Typed Frame Indicator                               */
+#define	RX_VLAN1          0x20000000    /* RX VLAN1 Frame Indicator                               */
+#define	RX_VLAN2          0x40000000    /* RX VLAN2 Frame Indicator                               */
+#define	RX_ACCEPT         0x80000000    /* RX Frame Accepted Indicator                            */
+
+/*  EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks  */
+
+#define	TX_COMP           0x00000001    /* TX Frame Complete                                      */
+#define	TX_OK             0x00000002    /* TX Frame Sent With No Errors                           */
+#define	TX_ECOLL          0x00000004    /* TX Frame Excessive Collision Error                     */
+#define	TX_LATE           0x00000008    /* TX Frame Late Collision Error                          */
+#define	TX_DMAU           0x00000010    /* TX Frame DMA Underrun Error (STAT)                     */
+#define	TX_MACE           0x00000010    /* Internal MAC Error Detected (STKY and IRQE)            */
+#define	TX_EDEFER         0x00000020    /* TX Frame Excessive Deferral Error                      */
+#define	TX_BROAD          0x00000040    /* TX Broadcast Frame Indicator                           */
+#define	TX_MULTI          0x00000080    /* TX Multicast Frame Indicator                           */
+#define	TX_CCNT           0x00000F00    /* TX Frame Collision Count                               */
+#define	TX_DEFER          0x00001000    /* TX Frame Deferred Indicator                            */
+#define	TX_CRS            0x00002000    /* TX Frame Carrier Sense Not Asserted Error              */
+#define	TX_LOSS           0x00004000    /* TX Frame Carrier Lost During TX Error                  */
+#define	TX_RETRY          0x00008000    /* TX Frame Successful After Retry                        */
+#define	TX_FRLEN          0x07FF0000    /* TX Frame Length (Bytes)                                */
+
+/* EMAC_MMC_CTL Masks */
+#define	RSTC              0x00000001    /* Reset All Counters                                     */
+#define	CROLL             0x00000002    /* Counter Roll-Over Enable                               */
+#define	CCOR              0x00000004    /* Counter Clear-On-Read Mode Enable                      */
+#define	MMCE              0x00000008    /* Enable MMC Counter Operation                           */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
+#define	RX_OK_CNT         0x00000001    /* RX Frames Received With No Errors                      */
+#define	RX_FCS_CNT        0x00000002    /* RX Frames W/Frame Check Sequence Errors                */
+#define	RX_ALIGN_CNT      0x00000004    /* RX Frames With Alignment Errors                        */
+#define	RX_OCTET_CNT      0x00000008    /* RX Octets Received OK                                  */
+#define	RX_LOST_CNT       0x00000010    /* RX Frames Lost Due To Internal MAC RX Error            */
+#define	RX_UNI_CNT        0x00000020    /* Unicast RX Frames Received OK                          */
+#define	RX_MULTI_CNT      0x00000040    /* Multicast RX Frames Received OK                        */
+#define	RX_BROAD_CNT      0x00000080    /* Broadcast RX Frames Received OK                        */
+#define	RX_IRL_CNT        0x00000100    /* RX Frames With In-Range Length Errors                  */
+#define	RX_ORL_CNT        0x00000200    /* RX Frames With Out-Of-Range Length Errors              */
+#define	RX_LONG_CNT       0x00000400    /* RX Frames With Frame Too Long Errors                   */
+#define	RX_MACCTL_CNT     0x00000800    /* MAC Control RX Frames Received                         */
+#define	RX_OPCODE_CTL     0x00001000    /* Unsupported Op-Code RX Frames Received                 */
+#define	RX_PAUSE_CNT      0x00002000    /* PAUSEMAC Control RX Frames Received                    */
+#define	RX_ALLF_CNT       0x00004000    /* All RX Frames Received                                 */
+#define	RX_ALLO_CNT       0x00008000    /* All RX Octets Received                                 */
+#define	RX_TYPED_CNT      0x00010000    /* Typed RX Frames Received                               */
+#define	RX_SHORT_CNT      0x00020000    /* RX Frame Fragments (< 64 Bytes) Received               */
+#define	RX_EQ64_CNT       0x00040000    /* 64-Byte RX Frames Received                             */
+#define	RX_LT128_CNT      0x00080000    /* 65-127-Byte RX Frames Received                         */
+#define	RX_LT256_CNT      0x00100000    /* 128-255-Byte RX Frames Received                        */
+#define	RX_LT512_CNT      0x00200000    /* 256-511-Byte RX Frames Received                        */
+#define	RX_LT1024_CNT     0x00400000    /* 512-1023-Byte RX Frames Received                       */
+#define	RX_GE1024_CNT     0x00800000    /* 1024-Max-Byte RX Frames Received                       */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks  */
+
+#define	TX_OK_CNT         0x00000001    /* TX Frames Sent OK                                      */
+#define	TX_SCOLL_CNT      0x00000002    /* TX Frames With Single Collisions                       */
+#define	TX_MCOLL_CNT      0x00000004    /* TX Frames With Multiple Collisions                     */
+#define	TX_OCTET_CNT      0x00000008    /* TX Octets Sent OK                                      */
+#define	TX_DEFER_CNT      0x00000010    /* TX Frames With Deferred Transmission                   */
+#define	TX_LATE_CNT       0x00000020    /* TX Frames With Late Collisions                         */
+#define	TX_ABORTC_CNT     0x00000040    /* TX Frames Aborted Due To Excess Collisions             */
+#define	TX_LOST_CNT       0x00000080    /* TX Frames Lost Due To Internal MAC TX Error            */
+#define	TX_CRS_CNT        0x00000100    /* TX Frames With Carrier Sense Errors                    */
+#define	TX_UNI_CNT        0x00000200    /* Unicast TX Frames Sent                                 */
+#define	TX_MULTI_CNT      0x00000400    /* Multicast TX Frames Sent                               */
+#define	TX_BROAD_CNT      0x00000800    /* Broadcast TX Frames Sent                               */
+#define	TX_EXDEF_CTL      0x00001000    /* TX Frames With Excessive Deferral                      */
+#define	TX_MACCTL_CNT     0x00002000    /* MAC Control TX Frames Sent                             */
+#define	TX_ALLF_CNT       0x00004000    /* All TX Frames Sent                                     */
+#define	TX_ALLO_CNT       0x00008000    /* All TX Octets Sent                                     */
+#define	TX_EQ64_CNT       0x00010000    /* 64-Byte TX Frames Sent                                 */
+#define	TX_LT128_CNT      0x00020000    /* 65-127-Byte TX Frames Sent                             */
+#define	TX_LT256_CNT      0x00040000    /* 128-255-Byte TX Frames Sent                            */
+#define	TX_LT512_CNT      0x00080000    /* 256-511-Byte TX Frames Sent                            */
+#define	TX_LT1024_CNT     0x00100000    /* 512-1023-Byte TX Frames Sent                           */
+#define	TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
+#define	TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03800   /* Function address register */
+#define                        USB_POWER  0xffc03804   /* Power management register */
+#define                       USB_INTRTX  0xffc03808   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc0380c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03810   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03814   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03818   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc0381c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03820   /* USB frame number */
+#define                        USB_INDEX  0xffc03824   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03828   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc0382c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03830   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03840   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03848   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc0384c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03854   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc0385c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03860   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03868   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03880   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03888   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03890   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03898   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc038a0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc038a8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc038b0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc038b8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03900   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03904   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03908   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03948   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc0394c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03950   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03954   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03958   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc039e0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc039e4   /* Register used to set some calibration values */
+
+#define                  USB_APHY_CNTRL2  0xffc039e8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define                     USB_PHY_TEST  0xffc039ec   /* Used for reducing simulation time and simplifies FIFO testability */
+
+#define                  USB_PLLOSC_CTRL  0xffc039f0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc039f4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03a00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03a04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03a08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03a0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03a10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03a14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03a18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03a1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03a20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+#define               USB_EP_NI0_TXCOUNT  0xffc03a28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+
+/* USB Endpoint 1 Control Registers */
+
+#define                USB_EP_NI1_TXMAXP  0xffc03a40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03a44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03a48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03a4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03a50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03a54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03a58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03a5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03a60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+#define               USB_EP_NI1_TXCOUNT  0xffc03a68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+
+/* USB Endpoint 2 Control Registers */
+
+#define                USB_EP_NI2_TXMAXP  0xffc03a80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03a84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03a88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03a8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03a90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03a94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03a98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03a9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03aa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+#define               USB_EP_NI2_TXCOUNT  0xffc03aa8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+
+/* USB Endpoint 3 Control Registers */
+
+#define                USB_EP_NI3_TXMAXP  0xffc03ac0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ac4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ac8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03acc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ad0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ad4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ad8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03adc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ae0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+#define               USB_EP_NI3_TXCOUNT  0xffc03ae8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+
+/* USB Endpoint 4 Control Registers */
+
+#define                USB_EP_NI4_TXMAXP  0xffc03b00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03b04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03b08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03b0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03b10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03b14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03b18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03b1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03b20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+#define               USB_EP_NI4_TXCOUNT  0xffc03b28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+
+/* USB Endpoint 5 Control Registers */
+
+#define                USB_EP_NI5_TXMAXP  0xffc03b40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03b44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03b48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03b4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03b50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03b54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03b58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03b5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03b60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+#define               USB_EP_NI5_TXCOUNT  0xffc03b68   /* Number of bytes to be written to the endpoint5 Tx FIFO */
+
+/* USB Endpoint 6 Control Registers */
+
+#define                USB_EP_NI6_TXMAXP  0xffc03b80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03b84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03b88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03b8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03b90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03b94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03b98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03b9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03ba0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+#define               USB_EP_NI6_TXCOUNT  0xffc03ba8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+
+/* USB Endpoint 7 Control Registers */
+
+#define                USB_EP_NI7_TXMAXP  0xffc03bc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03bc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03bc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03bcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03bd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03bd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03bd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03bdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03bf0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03bf8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+
+#define                USB_DMA_INTERRUPT  0xffc03c00   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc03c04   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc03c08   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc03c0c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc03c10   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc03c14   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc03c24   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc03c28   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc03c2c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc03c30   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc03c34   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc03c44   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc03c48   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc03c4c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc03c50   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc03c54   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc03c64   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc03c68   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc03c6c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc03c70   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc03c74   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc03c84   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc03c88   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc03c8c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc03c90   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc03c94   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc03ca4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc03ca8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc03cac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc03cb0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc03cb4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc03cc4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc03cc8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc03ccc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc03cd0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc03cd4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc03ce4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc03ce8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc03cec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc03cf0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc03cf4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define          nENABLE_SUSPENDM  0x0       
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define             nSUSPEND_MODE  0x0       
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define              nRESUME_MODE  0x0       
+#define                     RESET  0x8        /* Reset indicator */
+#define                    nRESET  0x0       
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                  nHS_MODE  0x0       
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                nHS_ENABLE  0x0       
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                nSOFT_CONN  0x0       
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+#define               nISO_UPDATE  0x0       
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                   nEP0_TX  0x0       
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                   nEP1_TX  0x0       
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                   nEP2_TX  0x0       
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                   nEP3_TX  0x0       
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                   nEP4_TX  0x0       
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                   nEP5_TX  0x0       
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                   nEP6_TX  0x0       
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+#define                   nEP7_TX  0x0       
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                   nEP1_RX  0x0       
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                   nEP2_RX  0x0       
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                   nEP3_RX  0x0       
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                   nEP4_RX  0x0       
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                   nEP5_RX  0x0       
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                   nEP6_RX  0x0       
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+#define                   nEP7_RX  0x0       
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                 nEP0_TX_E  0x0       
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                 nEP1_TX_E  0x0       
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                 nEP2_TX_E  0x0       
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                 nEP3_TX_E  0x0       
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                 nEP4_TX_E  0x0       
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                 nEP5_TX_E  0x0       
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                 nEP6_TX_E  0x0       
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+#define                 nEP7_TX_E  0x0       
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                 nEP1_RX_E  0x0       
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                 nEP2_RX_E  0x0       
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                 nEP3_RX_E  0x0       
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                 nEP4_RX_E  0x0       
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                 nEP5_RX_E  0x0       
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                 nEP6_RX_E  0x0       
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+#define                 nEP7_RX_E  0x0       
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                nSUSPEND_B  0x0       
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define                 nRESUME_B  0x0       
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define         nRESET_OR_BABLE_B  0x0       
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    nSOF_B  0x0       
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                   nCONN_B  0x0       
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define                 nDISCON_B  0x0       
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define            nSESSION_REQ_B  0x0       
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+#define             nVBUS_ERROR_B  0x0       
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define               nSUSPEND_BE  0x0       
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define                nRESUME_BE  0x0       
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define        nRESET_OR_BABLE_BE  0x0       
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   nSOF_BE  0x0       
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                  nCONN_BE  0x0       
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define                nDISCON_BE  0x0       
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define           nSESSION_REQ_BE  0x0       
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+#define            nVBUS_ERROR_BE  0x0       
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define               nGLOBAL_ENA  0x0       
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define               nEP1_TX_ENA  0x0       
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define               nEP2_TX_ENA  0x0       
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define               nEP3_TX_ENA  0x0       
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define               nEP4_TX_ENA  0x0       
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define               nEP5_TX_ENA  0x0       
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define               nEP6_TX_ENA  0x0       
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define               nEP7_TX_ENA  0x0       
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define               nEP1_RX_ENA  0x0       
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define               nEP2_RX_ENA  0x0       
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define               nEP3_RX_ENA  0x0       
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define               nEP4_RX_ENA  0x0       
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define               nEP5_RX_ENA  0x0       
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define               nEP6_RX_ENA  0x0       
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+#define               nEP7_RX_ENA  0x0       
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  nSESSION  0x0       
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 nHOST_REQ  0x0       
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                nHOST_MODE  0x0       
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                    nVBUS0  0x0       
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                    nVBUS1  0x0       
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                    nLSDEV  0x0       
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                    nFSDEV  0x0       
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+#define                 nB_DEVICE  0x0       
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            nDRIVE_VBUS_ON  0x0       
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           nDRIVE_VBUS_OFF  0x0       
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define          nCHRG_VBUS_START  0x0       
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define            nCHRG_VBUS_END  0x0       
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define       nDISCHRG_VBUS_START  0x0       
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+#define         nDISCHRG_VBUS_END  0x0       
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        nDRIVE_VBUS_ON_ENA  0x0       
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       nDRIVE_VBUS_OFF_ENA  0x0       
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define      nCHRG_VBUS_START_ENA  0x0       
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define        nCHRG_VBUS_END_ENA  0x0       
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define   nDISCHRG_VBUS_START_ENA  0x0       
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+#define     nDISCHRG_VBUS_END_ENA  0x0       
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                 nRXPKTRDY  0x0       
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                 nTXPKTRDY  0x0       
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define               nSTALL_SENT  0x0       
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  nDATAEND  0x0       
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 nSETUPEND  0x0       
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define                nSENDSTALL  0x0       
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define        nSERVICED_RXPKTRDY  0x0       
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define        nSERVICED_SETUPEND  0x0       
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define                nFLUSHFIFO  0x0       
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define         nSTALL_RECEIVED_H  0x0       
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define               nSETUPPKT_H  0x0       
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  nERROR_H  0x0       
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define                 nREQPKT_H  0x0       
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define              nSTATUSPKT_H  0x0       
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+#define            nNAK_TIMEOUT_H  0x0       
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define               nTXPKTRDY_T  0x0       
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define         nFIFO_NOT_EMPTY_T  0x0       
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               nUNDERRUN_T  0x0       
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              nFLUSHFIFO_T  0x0       
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define             nSTALL_SEND_T  0x0       
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define             nSTALL_SENT_T  0x0       
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define       nCLEAR_DATATOGGLE_T  0x0       
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define               nINCOMPTX_T  0x0       
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define             nDMAREQMODE_T  0x0       
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define       nFORCE_DATATOGGLE_T  0x0       
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define             nDMAREQ_ENA_T  0x0       
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                    nISO_T  0x0       
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                nAUTOSET_T  0x0       
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define                 nERROR_TH  0x0       
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define        nSTALL_RECEIVED_TH  0x0       
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+#define           nNAK_TIMEOUT_TH  0x0       
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               nRXPKTRDY_R  0x0       
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define              nFIFO_FULL_R  0x0       
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define                nOVERRUN_R  0x0       
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define              nDATAERROR_R  0x0       
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              nFLUSHFIFO_R  0x0       
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define             nSTALL_SEND_R  0x0       
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define             nSTALL_SENT_R  0x0       
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define       nCLEAR_DATATOGGLE_R  0x0       
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define               nINCOMPRX_R  0x0       
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define             nDMAREQMODE_R  0x0       
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define                nDISNYET_R  0x0       
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define             nDMAREQ_ENA_R  0x0       
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define                    nISO_R  0x0       
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define              nAUTOCLEAR_R  0x0       
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 nERROR_RH  0x0       
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define                nREQPKT_RH  0x0       
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define        nSTALL_RECEIVED_RH  0x0       
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define              nINCOMPRX_RH  0x0       
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define            nDMAREQMODE_RH  0x0       
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+#define               nAUTOREQ_RH  0x0       
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                 nDMA0_INT  0x0       
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                 nDMA1_INT  0x0       
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                 nDMA2_INT  0x0       
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                 nDMA3_INT  0x0       
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                 nDMA4_INT  0x0       
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                 nDMA5_INT  0x0       
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                 nDMA6_INT  0x0       
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+#define                 nDMA7_INT  0x0       
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                  nDMA_ENA  0x0       
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                nDIRECTION  0x0       
+#define                      MODE  0x4        /* DMA Bus error */
+#define                     nMODE  0x0       
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                  nINT_ENA  0x0       
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+#define                 nBUSERROR  0x0       
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+#endif /* _DEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
new file mode 100644
index 00000000000..6ac2ed7026e
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -0,0 +1,2005 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/defBF52x_base.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF52X_H
+#define _DEF_BF52X_H
+
+
+/* ************************************************************** */
+/*   SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x    */
+/* ************************************************************** */
+
+/* ==== begin from defBF534.h ==== */
+
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define PLL_CTL				0xFFC00000	/* PLL Control Register						*/
+#define PLL_DIV				0xFFC00004	/* PLL Divide Register						*/
+#define VR_CTL				0xFFC00008	/* Voltage Regulator Control Register		*/
+#define PLL_STAT			0xFFC0000C	/* PLL Status Register						*/
+#define PLL_LOCKCNT			0xFFC00010	/* PLL Lock Count Register					*/
+#define CHIPID        0xFFC00014  /* Device ID Register */
+
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define SWRST				0xFFC00100	/* Software Reset Register					*/
+#define SYSCR				0xFFC00104	/* System Configuration Register			*/
+#define SIC_RVECT			0xFFC00108	/* Interrupt Reset Vector Address Register	*/
+
+#define SIC_IMASK0			0xFFC0010C	/* Interrupt Mask Register					*/
+#define SIC_IAR0			0xFFC00110	/* Interrupt Assignment Register 0			*/
+#define SIC_IAR1			0xFFC00114	/* Interrupt Assignment Register 1			*/
+#define SIC_IAR2			0xFFC00118	/* Interrupt Assignment Register 2			*/
+#define SIC_IAR3			0xFFC0011C	/* Interrupt Assignment Register 3			*/
+#define SIC_ISR0				0xFFC00120	/* Interrupt Status Register				*/
+#define SIC_IWR0				0xFFC00124	/* Interrupt Wakeup Register				*/
+
+/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
+#define SIC_IMASK1                      0xFFC0014C     /* Interrupt Mask register of SIC2 */
+#define SIC_IAR4                        0xFFC00150     /* Interrupt Assignment register4 */
+#define SIC_IAR5                        0xFFC00154     /* Interrupt Assignment register5 */
+#define SIC_IAR6                        0xFFC00158     /* Interrupt Assignment register6 */
+#define SIC_IAR7                        0xFFC0015C     /* Interrupt Assignment register7 */
+#define SIC_ISR1                        0xFFC00160     /* Interrupt Statur register */
+#define SIC_IWR1                        0xFFC00164     /* Interrupt Wakeup register */
+
+
+/* Watchdog Timer			(0xFFC00200 - 0xFFC002FF)								*/
+#define WDOG_CTL			0xFFC00200	/* Watchdog Control Register				*/
+#define WDOG_CNT			0xFFC00204	/* Watchdog Count Register					*/
+#define WDOG_STAT			0xFFC00208	/* Watchdog Status Register					*/
+
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define RTC_STAT			0xFFC00300	/* RTC Status Register						*/
+#define RTC_ICTL			0xFFC00304	/* RTC Interrupt Control Register			*/
+#define RTC_ISTAT			0xFFC00308	/* RTC Interrupt Status Register			*/
+#define RTC_SWCNT			0xFFC0030C	/* RTC Stopwatch Count Register				*/
+#define RTC_ALARM			0xFFC00310	/* RTC Alarm Time Register					*/
+#define RTC_FAST			0xFFC00314	/* RTC Prescaler Enable Register			*/
+#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Alternate Macro		*/
+
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define UART0_THR			0xFFC00400	/* Transmit Holding register				*/
+#define UART0_RBR			0xFFC00400	/* Receive Buffer register					*/
+#define UART0_DLL			0xFFC00400	/* Divisor Latch (Low-Byte)					*/
+#define UART0_IER			0xFFC00404	/* Interrupt Enable Register				*/
+#define UART0_DLH			0xFFC00404	/* Divisor Latch (High-Byte)				*/
+#define UART0_IIR			0xFFC00408	/* Interrupt Identification Register		*/
+#define UART0_LCR			0xFFC0040C	/* Line Control Register					*/
+#define UART0_MCR			0xFFC00410	/* Modem Control Register					*/
+#define UART0_LSR			0xFFC00414	/* Line Status Register						*/
+#define UART0_MSR			0xFFC00418	/* Modem Status Register					*/
+#define UART0_SCR			0xFFC0041C	/* SCR Scratch Register						*/
+#define UART0_GCTL			0xFFC00424	/* Global Control Register					*/
+
+
+/* SPI Controller			(0xFFC00500 - 0xFFC005FF)								*/
+#define SPI0_REGBASE			0xFFC00500
+#define SPI_CTL				0xFFC00500	/* SPI Control Register						*/
+#define SPI_FLG				0xFFC00504	/* SPI Flag register						*/
+#define SPI_STAT			0xFFC00508	/* SPI Status register						*/
+#define SPI_TDBR			0xFFC0050C	/* SPI Transmit Data Buffer Register		*/
+#define SPI_RDBR			0xFFC00510	/* SPI Receive Data Buffer Register			*/
+#define SPI_BAUD			0xFFC00514	/* SPI Baud rate Register					*/
+#define SPI_SHADOW			0xFFC00518	/* SPI_RDBR Shadow Register					*/
+
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define TIMER0_CONFIG		0xFFC00600	/* Timer 0 Configuration Register			*/
+#define TIMER0_COUNTER		0xFFC00604	/* Timer 0 Counter Register					*/
+#define TIMER0_PERIOD		0xFFC00608	/* Timer 0 Period Register					*/
+#define TIMER0_WIDTH		0xFFC0060C	/* Timer 0 Width Register					*/
+
+#define TIMER1_CONFIG		0xFFC00610	/* Timer 1 Configuration Register  			*/
+#define TIMER1_COUNTER		0xFFC00614	/* Timer 1 Counter Register        			*/
+#define TIMER1_PERIOD		0xFFC00618	/* Timer 1 Period Register         			*/
+#define TIMER1_WIDTH		0xFFC0061C	/* Timer 1 Width Register          			*/
+
+#define TIMER2_CONFIG		0xFFC00620	/* Timer 2 Configuration Register  			*/
+#define TIMER2_COUNTER		0xFFC00624	/* Timer 2 Counter Register        			*/
+#define TIMER2_PERIOD		0xFFC00628	/* Timer 2 Period Register         			*/
+#define TIMER2_WIDTH		0xFFC0062C	/* Timer 2 Width Register          			*/
+
+#define TIMER3_CONFIG		0xFFC00630	/* Timer 3 Configuration Register			*/
+#define TIMER3_COUNTER		0xFFC00634	/* Timer 3 Counter Register					*/
+#define TIMER3_PERIOD		0xFFC00638	/* Timer 3 Period Register					*/
+#define TIMER3_WIDTH		0xFFC0063C	/* Timer 3 Width Register					*/
+
+#define TIMER4_CONFIG		0xFFC00640	/* Timer 4 Configuration Register  			*/
+#define TIMER4_COUNTER		0xFFC00644	/* Timer 4 Counter Register        			*/
+#define TIMER4_PERIOD		0xFFC00648	/* Timer 4 Period Register         			*/
+#define TIMER4_WIDTH		0xFFC0064C	/* Timer 4 Width Register          			*/
+
+#define TIMER5_CONFIG		0xFFC00650	/* Timer 5 Configuration Register  			*/
+#define TIMER5_COUNTER		0xFFC00654	/* Timer 5 Counter Register        			*/
+#define TIMER5_PERIOD		0xFFC00658	/* Timer 5 Period Register         			*/
+#define TIMER5_WIDTH		0xFFC0065C	/* Timer 5 Width Register          			*/
+
+#define TIMER6_CONFIG		0xFFC00660	/* Timer 6 Configuration Register  			*/
+#define TIMER6_COUNTER		0xFFC00664	/* Timer 6 Counter Register        			*/
+#define TIMER6_PERIOD		0xFFC00668	/* Timer 6 Period Register         			*/
+#define TIMER6_WIDTH		0xFFC0066C	/* Timer 6 Width Register          			*/
+
+#define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register  			*/
+#define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register        			*/
+#define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register         			*/
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/
+
+#define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register					*/
+#define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register					*/
+#define TIMER_STATUS		0xFFC00688	/* Timer Status Register					*/
+
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)												*/
+#define PORTFIO					0xFFC00700	/* Port F I/O Pin State Specify Register				*/
+#define PORTFIO_CLEAR			0xFFC00704	/* Port F I/O Peripheral Interrupt Clear Register		*/
+#define PORTFIO_SET				0xFFC00708	/* Port F I/O Peripheral Interrupt Set Register			*/
+#define PORTFIO_TOGGLE			0xFFC0070C	/* Port F I/O Pin State Toggle Register					*/
+#define PORTFIO_MASKA			0xFFC00710	/* Port F I/O Mask State Specify Interrupt A Register	*/
+#define PORTFIO_MASKA_CLEAR		0xFFC00714	/* Port F I/O Mask Disable Interrupt A Register			*/
+#define PORTFIO_MASKA_SET		0xFFC00718	/* Port F I/O Mask Enable Interrupt A Register			*/
+#define PORTFIO_MASKA_TOGGLE	0xFFC0071C	/* Port F I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTFIO_MASKB			0xFFC00720	/* Port F I/O Mask State Specify Interrupt B Register	*/
+#define PORTFIO_MASKB_CLEAR		0xFFC00724	/* Port F I/O Mask Disable Interrupt B Register			*/
+#define PORTFIO_MASKB_SET		0xFFC00728	/* Port F I/O Mask Enable Interrupt B Register			*/
+#define PORTFIO_MASKB_TOGGLE	0xFFC0072C	/* Port F I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTFIO_DIR				0xFFC00730	/* Port F I/O Direction Register						*/
+#define PORTFIO_POLAR			0xFFC00734	/* Port F I/O Source Polarity Register					*/
+#define PORTFIO_EDGE			0xFFC00738	/* Port F I/O Source Sensitivity Register				*/
+#define PORTFIO_BOTH			0xFFC0073C	/* Port F I/O Set on BOTH Edges Register				*/
+#define PORTFIO_INEN			0xFFC00740	/* Port F I/O Input Enable Register 					*/
+
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)										*/
+#define SPORT0_TCR1			0xFFC00800	/* SPORT0 Transmit Configuration 1 Register			*/
+#define SPORT0_TCR2			0xFFC00804	/* SPORT0 Transmit Configuration 2 Register			*/
+#define SPORT0_TCLKDIV		0xFFC00808	/* SPORT0 Transmit Clock Divider					*/
+#define SPORT0_TFSDIV		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider				*/
+#define SPORT0_TX			0xFFC00810	/* SPORT0 TX Data Register							*/
+#define SPORT0_RX			0xFFC00818	/* SPORT0 RX Data Register							*/
+#define SPORT0_RCR1			0xFFC00820	/* SPORT0 Transmit Configuration 1 Register			*/
+#define SPORT0_RCR2			0xFFC00824	/* SPORT0 Transmit Configuration 2 Register			*/
+#define SPORT0_RCLKDIV		0xFFC00828	/* SPORT0 Receive Clock Divider						*/
+#define SPORT0_RFSDIV		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider				*/
+#define SPORT0_STAT			0xFFC00830	/* SPORT0 Status Register							*/
+#define SPORT0_CHNL			0xFFC00834	/* SPORT0 Current Channel Register					*/
+#define SPORT0_MCMC1		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1	*/
+#define SPORT0_MCMC2		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2	*/
+#define SPORT0_MTCS0		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0	*/
+#define SPORT0_MTCS1		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1	*/
+#define SPORT0_MTCS2		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2	*/
+#define SPORT0_MTCS3		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3	*/
+#define SPORT0_MRCS0		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0	*/
+#define SPORT0_MRCS1		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1	*/
+#define SPORT0_MRCS2		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2	*/
+#define SPORT0_MRCS3		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3	*/
+
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)										*/
+#define SPORT1_TCR1			0xFFC00900	/* SPORT1 Transmit Configuration 1 Register			*/
+#define SPORT1_TCR2			0xFFC00904	/* SPORT1 Transmit Configuration 2 Register			*/
+#define SPORT1_TCLKDIV		0xFFC00908	/* SPORT1 Transmit Clock Divider					*/
+#define SPORT1_TFSDIV		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider				*/
+#define SPORT1_TX			0xFFC00910	/* SPORT1 TX Data Register							*/
+#define SPORT1_RX			0xFFC00918	/* SPORT1 RX Data Register							*/
+#define SPORT1_RCR1			0xFFC00920	/* SPORT1 Transmit Configuration 1 Register			*/
+#define SPORT1_RCR2			0xFFC00924	/* SPORT1 Transmit Configuration 2 Register			*/
+#define SPORT1_RCLKDIV		0xFFC00928	/* SPORT1 Receive Clock Divider						*/
+#define SPORT1_RFSDIV		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider				*/
+#define SPORT1_STAT			0xFFC00930	/* SPORT1 Status Register							*/
+#define SPORT1_CHNL			0xFFC00934	/* SPORT1 Current Channel Register					*/
+#define SPORT1_MCMC1		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1	*/
+#define SPORT1_MCMC2		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2	*/
+#define SPORT1_MTCS0		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0	*/
+#define SPORT1_MTCS1		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1	*/
+#define SPORT1_MTCS2		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2	*/
+#define SPORT1_MTCS3		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3	*/
+#define SPORT1_MRCS0		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0	*/
+#define SPORT1_MRCS1		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1	*/
+#define SPORT1_MRCS2		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2	*/
+#define SPORT1_MRCS3		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3	*/
+
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)								*/
+#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register	*/
+#define EBIU_AMBCTL0		0xFFC00A04	/* Asynchronous Memory Bank Control Register 0	*/
+#define EBIU_AMBCTL1		0xFFC00A08	/* Asynchronous Memory Bank Control Register 1	*/
+#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register				*/
+#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register					*/
+#define EBIU_SDRRC			0xFFC00A18	/* SDRAM Refresh Rate Control Register			*/
+#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register						*/
+
+
+/* DMA Traffic Control Registers													*/
+#define DMA_TC_PER			0xFFC00B0C	/* Traffic Control Periods Register			*/
+#define DMA_TC_CNT			0xFFC00B10	/* Traffic Control Current Counts Register	*/
+
+/* Alternate deprecated register names (below) provided for backwards code compatibility */
+#define DMA_TCPER			0xFFC00B0C	/* Traffic Control Periods Register			*/
+#define DMA_TCCNT			0xFFC00B10	/* Traffic Control Current Counts Register	*/
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF)															*/
+#define DMA0_NEXT_DESC_PTR		0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register		*/
+#define DMA0_START_ADDR			0xFFC00C04	/* DMA Channel 0 Start Address Register					*/
+#define DMA0_CONFIG				0xFFC00C08	/* DMA Channel 0 Configuration Register					*/
+#define DMA0_X_COUNT			0xFFC00C10	/* DMA Channel 0 X Count Register						*/
+#define DMA0_X_MODIFY			0xFFC00C14	/* DMA Channel 0 X Modify Register						*/
+#define DMA0_Y_COUNT			0xFFC00C18	/* DMA Channel 0 Y Count Register						*/
+#define DMA0_Y_MODIFY			0xFFC00C1C	/* DMA Channel 0 Y Modify Register						*/
+#define DMA0_CURR_DESC_PTR		0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register	*/
+#define DMA0_CURR_ADDR			0xFFC00C24	/* DMA Channel 0 Current Address Register				*/
+#define DMA0_IRQ_STATUS			0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register				*/
+#define DMA0_PERIPHERAL_MAP		0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register				*/
+#define DMA0_CURR_X_COUNT		0xFFC00C30	/* DMA Channel 0 Current X Count Register				*/
+#define DMA0_CURR_Y_COUNT		0xFFC00C38	/* DMA Channel 0 Current Y Count Register				*/
+
+#define DMA1_NEXT_DESC_PTR		0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register		*/
+#define DMA1_START_ADDR			0xFFC00C44	/* DMA Channel 1 Start Address Register					*/
+#define DMA1_CONFIG				0xFFC00C48	/* DMA Channel 1 Configuration Register					*/
+#define DMA1_X_COUNT			0xFFC00C50	/* DMA Channel 1 X Count Register						*/
+#define DMA1_X_MODIFY			0xFFC00C54	/* DMA Channel 1 X Modify Register						*/
+#define DMA1_Y_COUNT			0xFFC00C58	/* DMA Channel 1 Y Count Register						*/
+#define DMA1_Y_MODIFY			0xFFC00C5C	/* DMA Channel 1 Y Modify Register						*/
+#define DMA1_CURR_DESC_PTR		0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register	*/
+#define DMA1_CURR_ADDR			0xFFC00C64	/* DMA Channel 1 Current Address Register				*/
+#define DMA1_IRQ_STATUS			0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register				*/
+#define DMA1_PERIPHERAL_MAP		0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register				*/
+#define DMA1_CURR_X_COUNT		0xFFC00C70	/* DMA Channel 1 Current X Count Register				*/
+#define DMA1_CURR_Y_COUNT		0xFFC00C78	/* DMA Channel 1 Current Y Count Register				*/
+
+#define DMA2_NEXT_DESC_PTR		0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register		*/
+#define DMA2_START_ADDR			0xFFC00C84	/* DMA Channel 2 Start Address Register					*/
+#define DMA2_CONFIG				0xFFC00C88	/* DMA Channel 2 Configuration Register					*/
+#define DMA2_X_COUNT			0xFFC00C90	/* DMA Channel 2 X Count Register						*/
+#define DMA2_X_MODIFY			0xFFC00C94	/* DMA Channel 2 X Modify Register						*/
+#define DMA2_Y_COUNT			0xFFC00C98	/* DMA Channel 2 Y Count Register						*/
+#define DMA2_Y_MODIFY			0xFFC00C9C	/* DMA Channel 2 Y Modify Register						*/
+#define DMA2_CURR_DESC_PTR		0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register	*/
+#define DMA2_CURR_ADDR			0xFFC00CA4	/* DMA Channel 2 Current Address Register				*/
+#define DMA2_IRQ_STATUS			0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register				*/
+#define DMA2_PERIPHERAL_MAP		0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register				*/
+#define DMA2_CURR_X_COUNT		0xFFC00CB0	/* DMA Channel 2 Current X Count Register				*/
+#define DMA2_CURR_Y_COUNT		0xFFC00CB8	/* DMA Channel 2 Current Y Count Register				*/
+
+#define DMA3_NEXT_DESC_PTR		0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register		*/
+#define DMA3_START_ADDR			0xFFC00CC4	/* DMA Channel 3 Start Address Register					*/
+#define DMA3_CONFIG				0xFFC00CC8	/* DMA Channel 3 Configuration Register					*/
+#define DMA3_X_COUNT			0xFFC00CD0	/* DMA Channel 3 X Count Register						*/
+#define DMA3_X_MODIFY			0xFFC00CD4	/* DMA Channel 3 X Modify Register						*/
+#define DMA3_Y_COUNT			0xFFC00CD8	/* DMA Channel 3 Y Count Register						*/
+#define DMA3_Y_MODIFY			0xFFC00CDC	/* DMA Channel 3 Y Modify Register						*/
+#define DMA3_CURR_DESC_PTR		0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register	*/
+#define DMA3_CURR_ADDR			0xFFC00CE4	/* DMA Channel 3 Current Address Register				*/
+#define DMA3_IRQ_STATUS			0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register				*/
+#define DMA3_PERIPHERAL_MAP		0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register				*/
+#define DMA3_CURR_X_COUNT		0xFFC00CF0	/* DMA Channel 3 Current X Count Register				*/
+#define DMA3_CURR_Y_COUNT		0xFFC00CF8	/* DMA Channel 3 Current Y Count Register				*/
+
+#define DMA4_NEXT_DESC_PTR		0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register		*/
+#define DMA4_START_ADDR			0xFFC00D04	/* DMA Channel 4 Start Address Register					*/
+#define DMA4_CONFIG				0xFFC00D08	/* DMA Channel 4 Configuration Register					*/
+#define DMA4_X_COUNT			0xFFC00D10	/* DMA Channel 4 X Count Register						*/
+#define DMA4_X_MODIFY			0xFFC00D14	/* DMA Channel 4 X Modify Register						*/
+#define DMA4_Y_COUNT			0xFFC00D18	/* DMA Channel 4 Y Count Register						*/
+#define DMA4_Y_MODIFY			0xFFC00D1C	/* DMA Channel 4 Y Modify Register						*/
+#define DMA4_CURR_DESC_PTR		0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register	*/
+#define DMA4_CURR_ADDR			0xFFC00D24	/* DMA Channel 4 Current Address Register				*/
+#define DMA4_IRQ_STATUS			0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register				*/
+#define DMA4_PERIPHERAL_MAP		0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register				*/
+#define DMA4_CURR_X_COUNT		0xFFC00D30	/* DMA Channel 4 Current X Count Register				*/
+#define DMA4_CURR_Y_COUNT		0xFFC00D38	/* DMA Channel 4 Current Y Count Register				*/
+
+#define DMA5_NEXT_DESC_PTR		0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register		*/
+#define DMA5_START_ADDR			0xFFC00D44	/* DMA Channel 5 Start Address Register					*/
+#define DMA5_CONFIG				0xFFC00D48	/* DMA Channel 5 Configuration Register					*/
+#define DMA5_X_COUNT			0xFFC00D50	/* DMA Channel 5 X Count Register						*/
+#define DMA5_X_MODIFY			0xFFC00D54	/* DMA Channel 5 X Modify Register						*/
+#define DMA5_Y_COUNT			0xFFC00D58	/* DMA Channel 5 Y Count Register						*/
+#define DMA5_Y_MODIFY			0xFFC00D5C	/* DMA Channel 5 Y Modify Register						*/
+#define DMA5_CURR_DESC_PTR		0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register	*/
+#define DMA5_CURR_ADDR			0xFFC00D64	/* DMA Channel 5 Current Address Register				*/
+#define DMA5_IRQ_STATUS			0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register				*/
+#define DMA5_PERIPHERAL_MAP		0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register				*/
+#define DMA5_CURR_X_COUNT		0xFFC00D70	/* DMA Channel 5 Current X Count Register				*/
+#define DMA5_CURR_Y_COUNT		0xFFC00D78	/* DMA Channel 5 Current Y Count Register				*/
+
+#define DMA6_NEXT_DESC_PTR		0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register		*/
+#define DMA6_START_ADDR			0xFFC00D84	/* DMA Channel 6 Start Address Register					*/
+#define DMA6_CONFIG				0xFFC00D88	/* DMA Channel 6 Configuration Register					*/
+#define DMA6_X_COUNT			0xFFC00D90	/* DMA Channel 6 X Count Register						*/
+#define DMA6_X_MODIFY			0xFFC00D94	/* DMA Channel 6 X Modify Register						*/
+#define DMA6_Y_COUNT			0xFFC00D98	/* DMA Channel 6 Y Count Register						*/
+#define DMA6_Y_MODIFY			0xFFC00D9C	/* DMA Channel 6 Y Modify Register						*/
+#define DMA6_CURR_DESC_PTR		0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register	*/
+#define DMA6_CURR_ADDR			0xFFC00DA4	/* DMA Channel 6 Current Address Register				*/
+#define DMA6_IRQ_STATUS			0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register				*/
+#define DMA6_PERIPHERAL_MAP		0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register				*/
+#define DMA6_CURR_X_COUNT		0xFFC00DB0	/* DMA Channel 6 Current X Count Register				*/
+#define DMA6_CURR_Y_COUNT		0xFFC00DB8	/* DMA Channel 6 Current Y Count Register				*/
+
+#define DMA7_NEXT_DESC_PTR		0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register		*/
+#define DMA7_START_ADDR			0xFFC00DC4	/* DMA Channel 7 Start Address Register					*/
+#define DMA7_CONFIG				0xFFC00DC8	/* DMA Channel 7 Configuration Register					*/
+#define DMA7_X_COUNT			0xFFC00DD0	/* DMA Channel 7 X Count Register						*/
+#define DMA7_X_MODIFY			0xFFC00DD4	/* DMA Channel 7 X Modify Register						*/
+#define DMA7_Y_COUNT			0xFFC00DD8	/* DMA Channel 7 Y Count Register						*/
+#define DMA7_Y_MODIFY			0xFFC00DDC	/* DMA Channel 7 Y Modify Register						*/
+#define DMA7_CURR_DESC_PTR		0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register	*/
+#define DMA7_CURR_ADDR			0xFFC00DE4	/* DMA Channel 7 Current Address Register				*/
+#define DMA7_IRQ_STATUS			0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register				*/
+#define DMA7_PERIPHERAL_MAP		0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register				*/
+#define DMA7_CURR_X_COUNT		0xFFC00DF0	/* DMA Channel 7 Current X Count Register				*/
+#define DMA7_CURR_Y_COUNT		0xFFC00DF8	/* DMA Channel 7 Current Y Count Register				*/
+
+#define DMA8_NEXT_DESC_PTR		0xFFC00E00	/* DMA Channel 8 Next Descriptor Pointer Register		*/
+#define DMA8_START_ADDR			0xFFC00E04	/* DMA Channel 8 Start Address Register					*/
+#define DMA8_CONFIG				0xFFC00E08	/* DMA Channel 8 Configuration Register					*/
+#define DMA8_X_COUNT			0xFFC00E10	/* DMA Channel 8 X Count Register						*/
+#define DMA8_X_MODIFY			0xFFC00E14	/* DMA Channel 8 X Modify Register						*/
+#define DMA8_Y_COUNT			0xFFC00E18	/* DMA Channel 8 Y Count Register						*/
+#define DMA8_Y_MODIFY			0xFFC00E1C	/* DMA Channel 8 Y Modify Register						*/
+#define DMA8_CURR_DESC_PTR		0xFFC00E20	/* DMA Channel 8 Current Descriptor Pointer Register	*/
+#define DMA8_CURR_ADDR			0xFFC00E24	/* DMA Channel 8 Current Address Register				*/
+#define DMA8_IRQ_STATUS			0xFFC00E28	/* DMA Channel 8 Interrupt/Status Register				*/
+#define DMA8_PERIPHERAL_MAP		0xFFC00E2C	/* DMA Channel 8 Peripheral Map Register				*/
+#define DMA8_CURR_X_COUNT		0xFFC00E30	/* DMA Channel 8 Current X Count Register				*/
+#define DMA8_CURR_Y_COUNT		0xFFC00E38	/* DMA Channel 8 Current Y Count Register				*/
+
+#define DMA9_NEXT_DESC_PTR		0xFFC00E40	/* DMA Channel 9 Next Descriptor Pointer Register		*/
+#define DMA9_START_ADDR			0xFFC00E44	/* DMA Channel 9 Start Address Register					*/
+#define DMA9_CONFIG				0xFFC00E48	/* DMA Channel 9 Configuration Register					*/
+#define DMA9_X_COUNT			0xFFC00E50	/* DMA Channel 9 X Count Register						*/
+#define DMA9_X_MODIFY			0xFFC00E54	/* DMA Channel 9 X Modify Register						*/
+#define DMA9_Y_COUNT			0xFFC00E58	/* DMA Channel 9 Y Count Register						*/
+#define DMA9_Y_MODIFY			0xFFC00E5C	/* DMA Channel 9 Y Modify Register						*/
+#define DMA9_CURR_DESC_PTR		0xFFC00E60	/* DMA Channel 9 Current Descriptor Pointer Register	*/
+#define DMA9_CURR_ADDR			0xFFC00E64	/* DMA Channel 9 Current Address Register				*/
+#define DMA9_IRQ_STATUS			0xFFC00E68	/* DMA Channel 9 Interrupt/Status Register				*/
+#define DMA9_PERIPHERAL_MAP		0xFFC00E6C	/* DMA Channel 9 Peripheral Map Register				*/
+#define DMA9_CURR_X_COUNT		0xFFC00E70	/* DMA Channel 9 Current X Count Register				*/
+#define DMA9_CURR_Y_COUNT		0xFFC00E78	/* DMA Channel 9 Current Y Count Register				*/
+
+#define DMA10_NEXT_DESC_PTR		0xFFC00E80	/* DMA Channel 10 Next Descriptor Pointer Register		*/
+#define DMA10_START_ADDR		0xFFC00E84	/* DMA Channel 10 Start Address Register				*/
+#define DMA10_CONFIG			0xFFC00E88	/* DMA Channel 10 Configuration Register				*/
+#define DMA10_X_COUNT			0xFFC00E90	/* DMA Channel 10 X Count Register						*/
+#define DMA10_X_MODIFY			0xFFC00E94	/* DMA Channel 10 X Modify Register						*/
+#define DMA10_Y_COUNT			0xFFC00E98	/* DMA Channel 10 Y Count Register						*/
+#define DMA10_Y_MODIFY			0xFFC00E9C	/* DMA Channel 10 Y Modify Register						*/
+#define DMA10_CURR_DESC_PTR		0xFFC00EA0	/* DMA Channel 10 Current Descriptor Pointer Register	*/
+#define DMA10_CURR_ADDR			0xFFC00EA4	/* DMA Channel 10 Current Address Register				*/
+#define DMA10_IRQ_STATUS		0xFFC00EA8	/* DMA Channel 10 Interrupt/Status Register				*/
+#define DMA10_PERIPHERAL_MAP	0xFFC00EAC	/* DMA Channel 10 Peripheral Map Register				*/
+#define DMA10_CURR_X_COUNT		0xFFC00EB0	/* DMA Channel 10 Current X Count Register				*/
+#define DMA10_CURR_Y_COUNT		0xFFC00EB8	/* DMA Channel 10 Current Y Count Register				*/
+
+#define DMA11_NEXT_DESC_PTR		0xFFC00EC0	/* DMA Channel 11 Next Descriptor Pointer Register		*/
+#define DMA11_START_ADDR		0xFFC00EC4	/* DMA Channel 11 Start Address Register				*/
+#define DMA11_CONFIG			0xFFC00EC8	/* DMA Channel 11 Configuration Register				*/
+#define DMA11_X_COUNT			0xFFC00ED0	/* DMA Channel 11 X Count Register						*/
+#define DMA11_X_MODIFY			0xFFC00ED4	/* DMA Channel 11 X Modify Register						*/
+#define DMA11_Y_COUNT			0xFFC00ED8	/* DMA Channel 11 Y Count Register						*/
+#define DMA11_Y_MODIFY			0xFFC00EDC	/* DMA Channel 11 Y Modify Register						*/
+#define DMA11_CURR_DESC_PTR		0xFFC00EE0	/* DMA Channel 11 Current Descriptor Pointer Register	*/
+#define DMA11_CURR_ADDR			0xFFC00EE4	/* DMA Channel 11 Current Address Register				*/
+#define DMA11_IRQ_STATUS		0xFFC00EE8	/* DMA Channel 11 Interrupt/Status Register				*/
+#define DMA11_PERIPHERAL_MAP	0xFFC00EEC	/* DMA Channel 11 Peripheral Map Register				*/
+#define DMA11_CURR_X_COUNT		0xFFC00EF0	/* DMA Channel 11 Current X Count Register				*/
+#define DMA11_CURR_Y_COUNT		0xFFC00EF8	/* DMA Channel 11 Current Y Count Register				*/
+
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC00F00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register		*/
+#define MDMA_D0_START_ADDR		0xFFC00F04	/* MemDMA Stream 0 Destination Start Address Register				*/
+#define MDMA_D0_CONFIG			0xFFC00F08	/* MemDMA Stream 0 Destination Configuration Register				*/
+#define MDMA_D0_X_COUNT			0xFFC00F10	/* MemDMA Stream 0 Destination X Count Register						*/
+#define MDMA_D0_X_MODIFY		0xFFC00F14	/* MemDMA Stream 0 Destination X Modify Register					*/
+#define MDMA_D0_Y_COUNT			0xFFC00F18	/* MemDMA Stream 0 Destination Y Count Register						*/
+#define MDMA_D0_Y_MODIFY		0xFFC00F1C	/* MemDMA Stream 0 Destination Y Modify Register					*/
+#define MDMA_D0_CURR_DESC_PTR	0xFFC00F20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register	*/
+#define MDMA_D0_CURR_ADDR		0xFFC00F24	/* MemDMA Stream 0 Destination Current Address Register				*/
+#define MDMA_D0_IRQ_STATUS		0xFFC00F28	/* MemDMA Stream 0 Destination Interrupt/Status Register			*/
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC00F2C	/* MemDMA Stream 0 Destination Peripheral Map Register				*/
+#define MDMA_D0_CURR_X_COUNT	0xFFC00F30	/* MemDMA Stream 0 Destination Current X Count Register				*/
+#define MDMA_D0_CURR_Y_COUNT	0xFFC00F38	/* MemDMA Stream 0 Destination Current Y Count Register				*/
+
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC00F40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register			*/
+#define MDMA_S0_START_ADDR		0xFFC00F44	/* MemDMA Stream 0 Source Start Address Register					*/
+#define MDMA_S0_CONFIG			0xFFC00F48	/* MemDMA Stream 0 Source Configuration Register					*/
+#define MDMA_S0_X_COUNT			0xFFC00F50	/* MemDMA Stream 0 Source X Count Register							*/
+#define MDMA_S0_X_MODIFY		0xFFC00F54	/* MemDMA Stream 0 Source X Modify Register							*/
+#define MDMA_S0_Y_COUNT			0xFFC00F58	/* MemDMA Stream 0 Source Y Count Register							*/
+#define MDMA_S0_Y_MODIFY		0xFFC00F5C	/* MemDMA Stream 0 Source Y Modify Register							*/
+#define MDMA_S0_CURR_DESC_PTR	0xFFC00F60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register		*/
+#define MDMA_S0_CURR_ADDR		0xFFC00F64	/* MemDMA Stream 0 Source Current Address Register					*/
+#define MDMA_S0_IRQ_STATUS		0xFFC00F68	/* MemDMA Stream 0 Source Interrupt/Status Register					*/
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC00F6C	/* MemDMA Stream 0 Source Peripheral Map Register					*/
+#define MDMA_S0_CURR_X_COUNT	0xFFC00F70	/* MemDMA Stream 0 Source Current X Count Register					*/
+#define MDMA_S0_CURR_Y_COUNT	0xFFC00F78	/* MemDMA Stream 0 Source Current Y Count Register					*/
+
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC00F80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register		*/
+#define MDMA_D1_START_ADDR		0xFFC00F84	/* MemDMA Stream 1 Destination Start Address Register				*/
+#define MDMA_D1_CONFIG			0xFFC00F88	/* MemDMA Stream 1 Destination Configuration Register				*/
+#define MDMA_D1_X_COUNT			0xFFC00F90	/* MemDMA Stream 1 Destination X Count Register						*/
+#define MDMA_D1_X_MODIFY		0xFFC00F94	/* MemDMA Stream 1 Destination X Modify Register					*/
+#define MDMA_D1_Y_COUNT			0xFFC00F98	/* MemDMA Stream 1 Destination Y Count Register						*/
+#define MDMA_D1_Y_MODIFY		0xFFC00F9C	/* MemDMA Stream 1 Destination Y Modify Register					*/
+#define MDMA_D1_CURR_DESC_PTR	0xFFC00FA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register	*/
+#define MDMA_D1_CURR_ADDR		0xFFC00FA4	/* MemDMA Stream 1 Destination Current Address Register				*/
+#define MDMA_D1_IRQ_STATUS		0xFFC00FA8	/* MemDMA Stream 1 Destination Interrupt/Status Register			*/
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC00FAC	/* MemDMA Stream 1 Destination Peripheral Map Register				*/
+#define MDMA_D1_CURR_X_COUNT	0xFFC00FB0	/* MemDMA Stream 1 Destination Current X Count Register				*/
+#define MDMA_D1_CURR_Y_COUNT	0xFFC00FB8	/* MemDMA Stream 1 Destination Current Y Count Register				*/
+
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC00FC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register			*/
+#define MDMA_S1_START_ADDR		0xFFC00FC4	/* MemDMA Stream 1 Source Start Address Register					*/
+#define MDMA_S1_CONFIG			0xFFC00FC8	/* MemDMA Stream 1 Source Configuration Register					*/
+#define MDMA_S1_X_COUNT			0xFFC00FD0	/* MemDMA Stream 1 Source X Count Register							*/
+#define MDMA_S1_X_MODIFY		0xFFC00FD4	/* MemDMA Stream 1 Source X Modify Register							*/
+#define MDMA_S1_Y_COUNT			0xFFC00FD8	/* MemDMA Stream 1 Source Y Count Register							*/
+#define MDMA_S1_Y_MODIFY		0xFFC00FDC	/* MemDMA Stream 1 Source Y Modify Register							*/
+#define MDMA_S1_CURR_DESC_PTR	0xFFC00FE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register		*/
+#define MDMA_S1_CURR_ADDR		0xFFC00FE4	/* MemDMA Stream 1 Source Current Address Register					*/
+#define MDMA_S1_IRQ_STATUS		0xFFC00FE8	/* MemDMA Stream 1 Source Interrupt/Status Register					*/
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC00FEC	/* MemDMA Stream 1 Source Peripheral Map Register					*/
+#define MDMA_S1_CURR_X_COUNT	0xFFC00FF0	/* MemDMA Stream 1 Source Current X Count Register					*/
+#define MDMA_S1_CURR_Y_COUNT	0xFFC00FF8	/* MemDMA Stream 1 Source Current Y Count Register					*/
+
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)				*/
+#define PPI_CONTROL			0xFFC01000	/* PPI Control Register			*/
+#define PPI_STATUS			0xFFC01004	/* PPI Status Register			*/
+#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register	*/
+#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register		*/
+#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register	*/
+
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
+#define TWI0_REGBASE			0xFFC01400
+#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
+#define TWI_CONTROL			0xFFC01404	/* TWI Control Register						*/
+#define TWI_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
+#define TWI_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
+#define TWI_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
+#define TWI_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
+#define TWI_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
+#define TWI_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
+#define TWI_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
+#define TWI_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
+#define TWI_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
+#define TWI_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
+#define TWI_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
+#define TWI_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
+#define TWI_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
+#define TWI_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
+
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
+#define PORTGIO					0xFFC01500	/* Port G I/O Pin State Specify Register				*/
+#define PORTGIO_CLEAR			0xFFC01504	/* Port G I/O Peripheral Interrupt Clear Register		*/
+#define PORTGIO_SET				0xFFC01508	/* Port G I/O Peripheral Interrupt Set Register			*/
+#define PORTGIO_TOGGLE			0xFFC0150C	/* Port G I/O Pin State Toggle Register					*/
+#define PORTGIO_MASKA			0xFFC01510	/* Port G I/O Mask State Specify Interrupt A Register	*/
+#define PORTGIO_MASKA_CLEAR		0xFFC01514	/* Port G I/O Mask Disable Interrupt A Register			*/
+#define PORTGIO_MASKA_SET		0xFFC01518	/* Port G I/O Mask Enable Interrupt A Register			*/
+#define PORTGIO_MASKA_TOGGLE	0xFFC0151C	/* Port G I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTGIO_MASKB			0xFFC01520	/* Port G I/O Mask State Specify Interrupt B Register	*/
+#define PORTGIO_MASKB_CLEAR		0xFFC01524	/* Port G I/O Mask Disable Interrupt B Register			*/
+#define PORTGIO_MASKB_SET		0xFFC01528	/* Port G I/O Mask Enable Interrupt B Register			*/
+#define PORTGIO_MASKB_TOGGLE	0xFFC0152C	/* Port G I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTGIO_DIR				0xFFC01530	/* Port G I/O Direction Register						*/
+#define PORTGIO_POLAR			0xFFC01534	/* Port G I/O Source Polarity Register					*/
+#define PORTGIO_EDGE			0xFFC01538	/* Port G I/O Source Sensitivity Register				*/
+#define PORTGIO_BOTH			0xFFC0153C	/* Port G I/O Set on BOTH Edges Register				*/
+#define PORTGIO_INEN			0xFFC01540	/* Port G I/O Input Enable Register						*/
+
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)												*/
+#define PORTHIO					0xFFC01700	/* Port H I/O Pin State Specify Register				*/
+#define PORTHIO_CLEAR			0xFFC01704	/* Port H I/O Peripheral Interrupt Clear Register		*/
+#define PORTHIO_SET				0xFFC01708	/* Port H I/O Peripheral Interrupt Set Register			*/
+#define PORTHIO_TOGGLE			0xFFC0170C	/* Port H I/O Pin State Toggle Register					*/
+#define PORTHIO_MASKA			0xFFC01710	/* Port H I/O Mask State Specify Interrupt A Register	*/
+#define PORTHIO_MASKA_CLEAR		0xFFC01714	/* Port H I/O Mask Disable Interrupt A Register			*/
+#define PORTHIO_MASKA_SET		0xFFC01718	/* Port H I/O Mask Enable Interrupt A Register			*/
+#define PORTHIO_MASKA_TOGGLE	0xFFC0171C	/* Port H I/O Mask Toggle Enable Interrupt A Register	*/
+#define PORTHIO_MASKB			0xFFC01720	/* Port H I/O Mask State Specify Interrupt B Register	*/
+#define PORTHIO_MASKB_CLEAR		0xFFC01724	/* Port H I/O Mask Disable Interrupt B Register			*/
+#define PORTHIO_MASKB_SET		0xFFC01728	/* Port H I/O Mask Enable Interrupt B Register			*/
+#define PORTHIO_MASKB_TOGGLE	0xFFC0172C	/* Port H I/O Mask Toggle Enable Interrupt B Register	*/
+#define PORTHIO_DIR				0xFFC01730	/* Port H I/O Direction Register						*/
+#define PORTHIO_POLAR			0xFFC01734	/* Port H I/O Source Polarity Register					*/
+#define PORTHIO_EDGE			0xFFC01738	/* Port H I/O Source Sensitivity Register				*/
+#define PORTHIO_BOTH			0xFFC0173C	/* Port H I/O Set on BOTH Edges Register				*/
+#define PORTHIO_INEN			0xFFC01740	/* Port H I/O Input Enable Register						*/
+
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define UART1_THR			0xFFC02000	/* Transmit Holding register			*/
+#define UART1_RBR			0xFFC02000	/* Receive Buffer register				*/
+#define UART1_DLL			0xFFC02000	/* Divisor Latch (Low-Byte)				*/
+#define UART1_IER			0xFFC02004	/* Interrupt Enable Register			*/
+#define UART1_DLH			0xFFC02004	/* Divisor Latch (High-Byte)			*/
+#define UART1_IIR			0xFFC02008	/* Interrupt Identification Register	*/
+#define UART1_LCR			0xFFC0200C	/* Line Control Register				*/
+#define UART1_MCR			0xFFC02010	/* Modem Control Register				*/
+#define UART1_LSR			0xFFC02014	/* Line Status Register					*/
+#define UART1_MSR			0xFFC02018	/* Modem Status Register				*/
+#define UART1_SCR			0xFFC0201C	/* SCR Scratch Register					*/
+#define UART1_GCTL			0xFFC02024	/* Global Control Register				*/
+
+
+/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)											*/
+#define PORTF_FER			0xFFC03200	/* Port F Function Enable Register (Alternate/Flag*)	*/
+#define PORTG_FER			0xFFC03204	/* Port G Function Enable Register (Alternate/Flag*)	*/
+#define PORTH_FER			0xFFC03208	/* Port H Function Enable Register (Alternate/Flag*)	*/
+#define BFIN_PORT_MUX			0xFFC0320C	/* Port Multiplexer Control Register					*/
+
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)										*/
+#define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register					*/
+#define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register				*/
+#define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register				*/
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register		*/
+#define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register	*/
+#define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register				*/
+#define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register				*/
+
+#define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register					*/
+#define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register				*/
+#define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register				*/
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register		*/
+#define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register	*/
+#define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register				*/
+#define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register				*/
+
+/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
+#define PORTF_MUX               0xFFC03210      /* Port F mux control */
+#define PORTG_MUX               0xFFC03214      /* Port G mux control */
+#define PORTH_MUX               0xFFC03218      /* Port H mux control */
+#define PORTF_DRIVE             0xFFC03220      /* Port F drive strength control */
+#define PORTG_DRIVE             0xFFC03224      /* Port G drive strength control */
+#define PORTH_DRIVE             0xFFC03228      /* Port H drive strength control */
+#define PORTF_SLEW              0xFFC03230      /* Port F slew control */
+#define PORTG_SLEW              0xFFC03234      /* Port G slew control */
+#define PORTH_SLEW              0xFFC03238      /* Port H slew control */
+#define PORTF_HYSTERISIS        0xFFC03240      /* Port F Schmitt trigger control */
+#define PORTG_HYSTERISIS        0xFFC03244      /* Port G Schmitt trigger control */
+#define PORTH_HYSTERISIS        0xFFC03248      /* Port H Schmitt trigger control */
+#define MISCPORT_DRIVE          0xFFC03280      /* Misc Port drive strength control */
+#define MISCPORT_SLEW           0xFFC03284      /* Misc Port slew control */
+#define MISCPORT_HYSTERISIS     0xFFC03288      /* Misc Port Schmitt trigger control */
+
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+/*
+** ********************* PLL AND RESET MASKS ****************************************/
+/* PLL_CTL Masks																	*/
+#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
+#define PLL_OFF			0x0002	/* PLL Not Powered									*/
+#define STOPCK			0x0008	/* Core Clock Off									*/
+#define PDWN			0x0020	/* Enter Deep Sleep Mode							*/
+#define	IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches			*/
+#define	OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals			*/
+#define BYPASS			0x0100	/* Bypass the PLL									*/
+#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors			*/
+/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
+#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
+
+/* PLL_DIV Masks														*/
+#define SSEL			0x000F	/* System Select						*/
+#define	CSEL			0x0030	/* Core Select							*/
+#define CSEL_DIV1		0x0000	/* 		CCLK = VCO / 1					*/
+#define CSEL_DIV2		0x0010	/* 		CCLK = VCO / 2					*/
+#define	CSEL_DIV4		0x0020	/* 		CCLK = VCO / 4					*/
+#define	CSEL_DIV8		0x0030	/* 		CCLK = VCO / 8					*/
+/* PLL_DIV Macros														*/
+#define SET_SSEL(x)		((x)&0xF)		/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
+
+/* VR_CTL Masks	*/
+#define	FREQ			0x3000	/* Switching Oscillator Frequency For Regulator	*/
+#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
+
+#define	VLEV			0x00F0	/* Internal Voltage Level					*/
+#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
+#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
+#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
+#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
+#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
+#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
+#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
+#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
+#define	VLEV_125		0x00E0	/* 		VLEV = 1.25 V (-5% - +10% Accuracy)	*/
+#define	VLEV_130		0x00F0	/* 		VLEV = 1.30 V (-5% - +10% Accuracy)	*/
+
+#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
+#define	USBWE			0x0200	/* Enable USB Wakeup From Hibernate			*/
+#define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
+#define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
+#define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
+#define	SCKELOW		0x8000	/* Enable Drive CKE Low During Reset		*/
+
+/* PLL_STAT Masks																	*/
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled	*/
+#define	FULL_ON				0x0002	/* Processor In Full On Mode					*/
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled	*/
+#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached					*/
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SWRST Masks																		*/
+#define SYSTEM_RESET		0x0007	/* Initiates A System Software Reset			*/
+#define	DOUBLE_FAULT		0x0008	/* Core Double Fault Causes Reset				*/
+#define RESET_DOUBLE		0x2000	/* SW Reset Generated By Core Double-Fault		*/
+#define RESET_WDOG			0x4000	/* SW Reset Generated By Watchdog Timer			*/
+#define RESET_SOFTWARE		0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/
+
+/* SYSCR Masks																				*/
+#define BMODE				0x0007	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
+#define	NOBOOT				0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/
+
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
+/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK										*/
+
+#if 0
+#define IRQ_PLL_WAKEUP	0x00000001	/* PLL Wakeup Interrupt			 					*/
+
+#define IRQ_ERROR1      0x00000002  /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
+#define IRQ_ERROR2      0x00000004  /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
+#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/
+#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/
+#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/
+#define IRQ_DMA4		0x00000040	/* DMA Channel 4 (SPORT0 TX) Interrupt 				*/
+#define IRQ_DMA5		0x00000080	/* DMA Channel 5 (SPORT1 RX) Interrupt 				*/
+
+#define IRQ_DMA6		0x00000100	/* DMA Channel 6 (SPORT1 TX) Interrupt 		 		*/
+#define IRQ_TWI			0x00000200	/* TWI Interrupt									*/
+#define IRQ_DMA7		0x00000400	/* DMA Channel 7 (SPI) Interrupt 					*/
+#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/
+#define IRQ_DMA9		0x00001000	/* DMA Channel 9 (UART0 TX) Interrupt 				*/
+#define IRQ_DMA10		0x00002000	/* DMA Channel 10 (UART1 RX) Interrupt 				*/
+#define IRQ_DMA11		0x00004000	/* DMA Channel 11 (UART1 TX) Interrupt 				*/
+#define IRQ_CAN_RX		0x00008000	/* CAN Receive Interrupt 							*/
+
+#define IRQ_CAN_TX		0x00010000	/* CAN Transmit Interrupt  							*/
+#define IRQ_DMA1		0x00020000	/* DMA Channel 1 (Ethernet RX) Interrupt 			*/
+#define IRQ_PFA_PORTH	0x00020000	/* PF Port H (PF47:32) Interrupt A 					*/
+#define IRQ_DMA2		0x00040000	/* DMA Channel 2 (Ethernet TX) Interrupt 			*/
+#define IRQ_PFB_PORTH	0x00040000	/* PF Port H (PF47:32) Interrupt B 					*/
+#define IRQ_TIMER0		0x00080000	/* Timer 0 Interrupt								*/
+#define IRQ_TIMER1		0x00100000	/* Timer 1 Interrupt 								*/
+#define IRQ_TIMER2		0x00200000	/* Timer 2 Interrupt 								*/
+#define IRQ_TIMER3		0x00400000	/* Timer 3 Interrupt 								*/
+#define IRQ_TIMER4		0x00800000	/* Timer 4 Interrupt 								*/
+
+#define IRQ_TIMER5		0x01000000	/* Timer 5 Interrupt 								*/
+#define IRQ_TIMER6		0x02000000	/* Timer 6 Interrupt 								*/
+#define IRQ_TIMER7		0x04000000	/* Timer 7 Interrupt 								*/
+#define IRQ_PFA_PORTFG	0x08000000	/* PF Ports F&G (PF31:0) Interrupt A 				*/
+#define IRQ_PFB_PORTF	0x80000000	/* PF Port F (PF15:0) Interrupt B 					*/
+#define IRQ_DMA12		0x20000000	/* DMA Channels 12 (MDMA1 Source) RX Interrupt 		*/
+#define IRQ_DMA13		0x20000000	/* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
+#define IRQ_DMA14		0x40000000	/* DMA Channels 14 (MDMA0 Source) RX Interrupt 		*/
+#define IRQ_DMA15		0x40000000	/* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
+#define IRQ_WDOG		0x80000000	/* Software Watchdog Timer Interrupt 				*/
+#define IRQ_PFB_PORTG	0x10000000	/* PF Port G (PF31:16) Interrupt B 					*/
+#endif
+
+/* SIC_IAR0 Macros															*/
+#define P0_IVG(x)		(((x)&0xF)-7)			/* Peripheral #0 assigned IVG #x 	*/
+#define P1_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #1 assigned IVG #x 	*/
+#define P2_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #2 assigned IVG #x 	*/
+#define P3_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #3 assigned IVG #x	*/
+#define P4_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #4 assigned IVG #x	*/
+#define P5_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #5 assigned IVG #x	*/
+#define P6_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #6 assigned IVG #x	*/
+#define P7_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #7 assigned IVG #x	*/
+
+/* SIC_IAR1 Macros															*/
+#define P8_IVG(x)		(((x)&0xF)-7)			/* Peripheral #8 assigned IVG #x 	*/
+#define P9_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #9 assigned IVG #x 	*/
+#define P10_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #10 assigned IVG #x	*/
+#define P11_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #11 assigned IVG #x 	*/
+#define P12_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #12 assigned IVG #x	*/
+#define P13_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #13 assigned IVG #x	*/
+#define P14_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #14 assigned IVG #x	*/
+#define P15_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #15 assigned IVG #x	*/
+
+/* SIC_IAR2 Macros															*/
+#define P16_IVG(x)		(((x)&0xF)-7)			/* Peripheral #16 assigned IVG #x	*/
+#define P17_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #17 assigned IVG #x	*/
+#define P18_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #18 assigned IVG #x	*/
+#define P19_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #19 assigned IVG #x	*/
+#define P20_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #20 assigned IVG #x	*/
+#define P21_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #21 assigned IVG #x	*/
+#define P22_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #22 assigned IVG #x	*/
+#define P23_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #23 assigned IVG #x	*/
+
+/* SIC_IAR3 Macros															*/
+#define P24_IVG(x)		(((x)&0xF)-7)			/* Peripheral #24 assigned IVG #x	*/
+#define P25_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #25 assigned IVG #x	*/
+#define P26_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #26 assigned IVG #x	*/
+#define P27_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #27 assigned IVG #x	*/
+#define P28_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #28 assigned IVG #x	*/
+#define P29_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #29 assigned IVG #x	*/
+#define P30_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #30 assigned IVG #x	*/
+#define P31_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #31 assigned IVG #x	*/
+
+
+/* SIC_IMASK Masks																		*/
+#define SIC_UNMASK_ALL	0x00000000					/* Unmask all peripheral interrupts	*/
+#define SIC_MASK_ALL	0xFFFFFFFF					/* Mask all peripheral interrupts	*/
+#define SIC_MASK(x)		(1 << ((x)&0x1F))					/* Mask Peripheral #x interrupt		*/
+#define SIC_UNMASK(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Unmask Peripheral #x interrupt	*/
+
+/* SIC_IWR Masks																		*/
+#define IWR_DISABLE_ALL	0x00000000					/* Wakeup Disable all peripherals	*/
+#define IWR_ENABLE_ALL	0xFFFFFFFF					/* Wakeup Enable all peripherals	*/
+#define IWR_ENABLE(x)	(1 << ((x)&0x1F))					/* Wakeup Enable Peripheral #x		*/
+#define IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F))) 	/* Wakeup Disable Peripheral #x		*/
+
+
+/* ********* WATCHDOG TIMER MASKS ******************** */
+
+/* Watchdog Timer WDOG_CTL Register Masks */
+
+#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
+#define WDEV_RESET 0x0000 /* generate reset event on roll over */
+#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
+#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
+#define WDEV_NONE 0x0006 /* no event on roll over */
+#define WDEN 0x0FF0 /* enable watchdog */
+#define WDDIS 0x0AD0 /* disable watchdog */
+#define WDRO 0x8000 /* watchdog rolled over latch */
+
+/* depreciated WDOG_CTL Register Masks for legacy code */
+
+
+#define ICTL WDEV
+#define ENABLE_RESET WDEV_RESET
+#define WDOG_RESET WDEV_RESET
+#define ENABLE_NMI WDEV_NMI
+#define WDOG_NMI WDEV_NMI
+#define ENABLE_GPI WDEV_GPI
+#define WDOG_GPI WDEV_GPI
+#define DISABLE_EVT WDEV_NONE
+#define WDOG_NONE WDEV_NONE
+
+#define TMR_EN WDEN
+#define TMR_DIS WDDIS
+#define TRO WDRO
+#define ICTL_P0 0x01
+ #define ICTL_P1 0x02
+#define TRO_P 0x0F
+
+
+
+/* ***************  REAL TIME CLOCK MASKS  **************************/
+/* RTC_STAT and RTC_ALARM Masks										*/
+#define	RTC_SEC				0x0000003F	/* Real-Time Clock Seconds	*/
+#define	RTC_MIN				0x00000FC0	/* Real-Time Clock Minutes	*/
+#define	RTC_HR				0x0001F000	/* Real-Time Clock Hours	*/
+#define	RTC_DAY				0xFFFE0000	/* Real-Time Clock Days		*/
+
+/* RTC_ALARM Macro			z=day		y=hr	x=min	w=sec		*/
+#define SET_ALARM(z,y,x,w)	((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
+
+/* RTC_ICTL and RTC_ISTAT Masks																		*/
+#define	STOPWATCH			0x0001		/* Stopwatch Interrupt Enable								*/
+#define	ALARM				0x0002		/* Alarm Interrupt Enable									*/
+#define	SECOND				0x0004		/* Seconds (1 Hz) Interrupt Enable							*/
+#define	MINUTE				0x0008		/* Minutes Interrupt Enable									*/
+#define	HOUR				0x0010		/* Hours Interrupt Enable									*/
+#define	DAY					0x0020		/* 24 Hours (Days) Interrupt Enable							*/
+#define	DAY_ALARM			0x0040		/* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable	*/
+#define	WRITE_PENDING		0x4000		/* Write Pending Status										*/
+#define	WRITE_COMPLETE		0x8000		/* Write Complete Interrupt Enable							*/
+
+/* RTC_FAST / RTC_PREN Mask												*/
+#define PREN				0x0001	/* Enable Prescaler, RTC Runs @1 Hz	*/
+
+
+/* ************** UART CONTROLLER MASKS *************************/
+/* UARTx_LCR Masks												*/
+#define WLS(x)		(((x)-5) & 0x03)	/* Word Length Select */
+#define STB			0x04				/* Stop Bits			*/
+#define PEN			0x08				/* Parity Enable		*/
+#define EPS			0x10				/* Even Parity Select	*/
+#define STP			0x20				/* Stick Parity			*/
+#define SB			0x40				/* Set Break			*/
+#define DLAB		0x80				/* Divisor Latch Access	*/
+
+/* UARTx_MCR Mask										*/
+#define LOOP_ENA	0x10	/* Loopback Mode Enable */
+#define LOOP_ENA_P	0x04
+
+/* UARTx_LSR Masks										*/
+#define DR			0x01	/* Data Ready				*/
+#define OE			0x02	/* Overrun Error			*/
+#define PE			0x04	/* Parity Error				*/
+#define FE			0x08	/* Framing Error			*/
+#define BI			0x10	/* Break Interrupt			*/
+#define THRE		0x20	/* THR Empty				*/
+#define TEMT		0x40	/* TSR and UART_THR Empty	*/
+
+/* UARTx_IER Masks															*/
+#define ERBFI		0x01		/* Enable Receive Buffer Full Interrupt		*/
+#define ETBEI		0x02		/* Enable Transmit Buffer Empty Interrupt	*/
+#define ELSI		0x04		/* Enable RX Status Interrupt				*/
+
+/* UARTx_IIR Masks														*/
+#define NINT		0x01		/* Pending Interrupt					*/
+#define IIR_TX_READY    0x02		/* UART_THR empty                               */
+#define IIR_RX_READY    0x04		/* Receive data ready                           */
+#define IIR_LINE_CHANGE 0x06		/* Receive line status    			*/
+#define IIR_STATUS	0x06		/* Highest Priority Pending Interrupt	*/
+
+/* UARTx_GCTL Masks													*/
+#define UCEN		0x01		/* Enable UARTx Clocks				*/
+#define IREN		0x02		/* Enable IrDA Mode					*/
+#define TPOLC		0x04		/* IrDA TX Polarity Change			*/
+#define RPOLC		0x08		/* IrDA RX Polarity Change			*/
+#define FPE			0x10		/* Force Parity Error On Transmit	*/
+#define FFE			0x20		/* Force Framing Error On Transmit	*/
+
+
+/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  ****************************/
+/* SPI_CTL Masks																	*/
+#define	TIMOD		0x0003		/* Transfer Initiate Mode							*/
+#define RDBR_CORE	0x0000		/* 		RDBR Read Initiates, IRQ When RDBR Full		*/
+#define	TDBR_CORE	0x0001		/* 		TDBR Write Initiates, IRQ When TDBR Empty	*/
+#define RDBR_DMA	0x0002		/* 		DMA Read, DMA Until FIFO Empty				*/
+#define TDBR_DMA	0x0003		/* 		DMA Write, DMA Until FIFO Full				*/
+#define SZ			0x0004		/* Send Zero (When TDBR Empty, Send Zero/Last*)		*/
+#define GM			0x0008		/* Get More (When RDBR Full, Overwrite/Discard*)	*/
+#define PSSE		0x0010		/* Slave-Select Input Enable						*/
+#define EMISO		0x0020		/* Enable MISO As Output							*/
+#define SIZE		0x0100		/* Size of Words (16/8* Bits)						*/
+#define LSBF		0x0200		/* LSB First										*/
+#define CPHA		0x0400		/* Clock Phase										*/
+#define CPOL		0x0800		/* Clock Polarity									*/
+#define MSTR		0x1000		/* Master/Slave*									*/
+#define WOM			0x2000		/* Write Open Drain Master							*/
+#define SPE			0x4000		/* SPI Enable										*/
+
+/* SPI_FLG Masks																	*/
+#define FLS1		0x0002		/* Enables SPI_FLOUT1 as SPI Slave-Select Output	*/
+#define FLS2		0x0004		/* Enables SPI_FLOUT2 as SPI Slave-Select Output	*/
+#define FLS3		0x0008		/* Enables SPI_FLOUT3 as SPI Slave-Select Output	*/
+#define FLS4		0x0010		/* Enables SPI_FLOUT4 as SPI Slave-Select Output	*/
+#define FLS5		0x0020		/* Enables SPI_FLOUT5 as SPI Slave-Select Output	*/
+#define FLS6		0x0040		/* Enables SPI_FLOUT6 as SPI Slave-Select Output	*/
+#define FLS7		0x0080		/* Enables SPI_FLOUT7 as SPI Slave-Select Output	*/
+#define FLG1		0xFDFF		/* Activates SPI_FLOUT1 							*/
+#define FLG2		0xFBFF		/* Activates SPI_FLOUT2								*/
+#define FLG3		0xF7FF		/* Activates SPI_FLOUT3								*/
+#define FLG4		0xEFFF		/* Activates SPI_FLOUT4								*/
+#define FLG5		0xDFFF		/* Activates SPI_FLOUT5								*/
+#define FLG6		0xBFFF		/* Activates SPI_FLOUT6								*/
+#define FLG7		0x7FFF		/* Activates SPI_FLOUT7								*/
+
+/* SPI_STAT Masks																				*/
+#define SPIF		0x0001		/* SPI Finished (Single-Word Transfer Complete)					*/
+#define MODF		0x0002		/* Mode Fault Error (Another Device Tried To Become Master)		*/
+#define TXE			0x0004		/* Transmission Error (Data Sent With No New Data In TDBR)		*/
+#define TXS			0x0008		/* SPI_TDBR Data Buffer Status (Full/Empty*)					*/
+#define RBSY		0x0010		/* Receive Error (Data Received With RDBR Full)					*/
+#define RXS			0x0020		/* SPI_RDBR Data Buffer Status (Full/Empty*)					*/
+#define TXCOL		0x0040		/* Transmit Collision Error (Corrupt Data May Have Been Sent)	*/
+
+
+/*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
+/* TIMER_ENABLE Masks													*/
+#define TIMEN0			0x0001		/* Enable Timer 0					*/
+#define TIMEN1			0x0002		/* Enable Timer 1					*/
+#define TIMEN2			0x0004		/* Enable Timer 2					*/
+#define TIMEN3			0x0008		/* Enable Timer 3					*/
+#define TIMEN4			0x0010		/* Enable Timer 4					*/
+#define TIMEN5			0x0020		/* Enable Timer 5					*/
+#define TIMEN6			0x0040		/* Enable Timer 6					*/
+#define TIMEN7			0x0080		/* Enable Timer 7					*/
+
+/* TIMER_DISABLE Masks													*/
+#define TIMDIS0			TIMEN0		/* Disable Timer 0					*/
+#define TIMDIS1			TIMEN1		/* Disable Timer 1					*/
+#define TIMDIS2			TIMEN2		/* Disable Timer 2					*/
+#define TIMDIS3			TIMEN3		/* Disable Timer 3					*/
+#define TIMDIS4			TIMEN4		/* Disable Timer 4					*/
+#define TIMDIS5			TIMEN5		/* Disable Timer 5					*/
+#define TIMDIS6			TIMEN6		/* Disable Timer 6					*/
+#define TIMDIS7			TIMEN7		/* Disable Timer 7					*/
+
+/* TIMER_STATUS Masks													*/
+#define TIMIL0			0x00000001	/* Timer 0 Interrupt				*/
+#define TIMIL1			0x00000002	/* Timer 1 Interrupt				*/
+#define TIMIL2			0x00000004	/* Timer 2 Interrupt				*/
+#define TIMIL3			0x00000008	/* Timer 3 Interrupt				*/
+#define TOVF_ERR0		0x00000010	/* Timer 0 Counter Overflow			*/
+#define TOVF_ERR1		0x00000020	/* Timer 1 Counter Overflow			*/
+#define TOVF_ERR2		0x00000040	/* Timer 2 Counter Overflow			*/
+#define TOVF_ERR3		0x00000080	/* Timer 3 Counter Overflow			*/
+#define TRUN0			0x00001000	/* Timer 0 Slave Enable Status		*/
+#define TRUN1			0x00002000	/* Timer 1 Slave Enable Status		*/
+#define TRUN2			0x00004000	/* Timer 2 Slave Enable Status		*/
+#define TRUN3			0x00008000	/* Timer 3 Slave Enable Status		*/
+#define TIMIL4			0x00010000	/* Timer 4 Interrupt				*/
+#define TIMIL5			0x00020000	/* Timer 5 Interrupt				*/
+#define TIMIL6			0x00040000	/* Timer 6 Interrupt				*/
+#define TIMIL7			0x00080000	/* Timer 7 Interrupt				*/
+#define TOVF_ERR4		0x00100000	/* Timer 4 Counter Overflow			*/
+#define TOVF_ERR5		0x00200000	/* Timer 5 Counter Overflow			*/
+#define TOVF_ERR6		0x00400000	/* Timer 6 Counter Overflow			*/
+#define TOVF_ERR7		0x00800000	/* Timer 7 Counter Overflow			*/
+#define TRUN4			0x10000000	/* Timer 4 Slave Enable Status		*/
+#define TRUN5			0x20000000	/* Timer 5 Slave Enable Status		*/
+#define TRUN6			0x40000000	/* Timer 6 Slave Enable Status		*/
+#define TRUN7			0x80000000	/* Timer 7 Slave Enable Status		*/
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+
+/* TIMERx_CONFIG Masks													*/
+#define PWM_OUT			0x0001	/* Pulse-Width Modulation Output Mode	*/
+#define WDTH_CAP		0x0002	/* Width Capture Input Mode				*/
+#define EXT_CLK			0x0003	/* External Clock Mode					*/
+#define PULSE_HI		0x0004	/* Action Pulse (Positive/Negative*)	*/
+#define PERIOD_CNT		0x0008	/* Period Count							*/
+#define IRQ_ENA			0x0010	/* Interrupt Request Enable				*/
+#define TIN_SEL			0x0020	/* Timer Input Select					*/
+#define OUT_DIS			0x0040	/* Output Pad Disable					*/
+#define CLK_SEL			0x0080	/* Timer Clock Select					*/
+#define TOGGLE_HI		0x0100	/* PWM_OUT PULSE_HI Toggle Mode			*/
+#define EMU_RUN			0x0200	/* Emulation Behavior Select			*/
+#define ERR_TYP			0xC000	/* Error Type							*/
+
+
+/* ******************   GPIO PORTS F, G, H MASKS  ***********************/
+/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks 				*/
+/* Port F Masks 														*/
+#define PF0		0x0001
+#define PF1		0x0002
+#define PF2		0x0004
+#define PF3		0x0008
+#define PF4		0x0010
+#define PF5		0x0020
+#define PF6		0x0040
+#define PF7		0x0080
+#define PF8		0x0100
+#define PF9		0x0200
+#define PF10	0x0400
+#define PF11	0x0800
+#define PF12	0x1000
+#define PF13	0x2000
+#define PF14	0x4000
+#define PF15	0x8000
+
+/* Port G Masks															*/
+#define PG0		0x0001
+#define PG1		0x0002
+#define PG2		0x0004
+#define PG3		0x0008
+#define PG4		0x0010
+#define PG5		0x0020
+#define PG6		0x0040
+#define PG7		0x0080
+#define PG8		0x0100
+#define PG9		0x0200
+#define PG10	0x0400
+#define PG11	0x0800
+#define PG12	0x1000
+#define PG13	0x2000
+#define PG14	0x4000
+#define PG15	0x8000
+
+/* Port H Masks															*/
+#define PH0		0x0001
+#define PH1		0x0002
+#define PH2		0x0004
+#define PH3		0x0008
+#define PH4		0x0010
+#define PH5		0x0020
+#define PH6		0x0040
+#define PH7		0x0080
+#define PH8		0x0100
+#define PH9		0x0200
+#define PH10	0x0400
+#define PH11	0x0800
+#define PH12	0x1000
+#define PH13	0x2000
+#define PH14	0x4000
+#define PH15	0x8000
+
+
+/* *******************  SERIAL PORT MASKS  **************************************/
+/* SPORTx_TCR1 Masks															*/
+#define TSPEN		0x0001		/* Transmit Enable								*/
+#define ITCLK		0x0002		/* Internal Transmit Clock Select				*/
+#define DTYPE_NORM	0x0004		/* Data Format Normal							*/
+#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
+#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
+#define TLSBIT		0x0010		/* Transmit Bit Order							*/
+#define ITFS		0x0200		/* Internal Transmit Frame Sync Select			*/
+#define TFSR		0x0400		/* Transmit Frame Sync Required Select			*/
+#define DITFS		0x0800		/* Data-Independent Transmit Frame Sync Select	*/
+#define LTFS		0x1000		/* Low Transmit Frame Sync Select				*/
+#define LATFS		0x2000		/* Late Transmit Frame Sync Select				*/
+#define TCKFE		0x4000		/* Clock Falling Edge Select					*/
+
+/* SPORTx_TCR2 Masks and Macro													*/
+#define SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length (2 - 31)				*/
+#define TXSE		0x0100		/* TX Secondary Enable							*/
+#define TSFSE		0x0200		/* Transmit Stereo Frame Sync Enable			*/
+#define TRFST		0x0400		/* Left/Right Order (1 = Right Channel 1st)		*/
+
+/* SPORTx_RCR1 Masks															*/
+#define RSPEN		0x0001		/* Receive Enable 								*/
+#define IRCLK		0x0002		/* Internal Receive Clock Select 				*/
+#define DTYPE_NORM	0x0004		/* Data Format Normal							*/
+#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
+#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
+#define RLSBIT		0x0010		/* Receive Bit Order							*/
+#define IRFS		0x0200		/* Internal Receive Frame Sync Select 			*/
+#define RFSR		0x0400		/* Receive Frame Sync Required Select 			*/
+#define LRFS		0x1000		/* Low Receive Frame Sync Select 				*/
+#define LARFS		0x2000		/* Late Receive Frame Sync Select 				*/
+#define RCKFE		0x4000		/* Clock Falling Edge Select 					*/
+
+/* SPORTx_RCR2 Masks															*/
+#define SLEN(x)		((x)&0x1F)	/* SPORT RX Word Length (2 - 31)				*/
+#define RXSE		0x0100		/* RX Secondary Enable							*/
+#define RSFSE		0x0200		/* RX Stereo Frame Sync Enable					*/
+#define RRFST		0x0400		/* Right-First Data Order 						*/
+
+/* SPORTx_STAT Masks															*/
+#define RXNE		0x0001		/* Receive FIFO Not Empty Status				*/
+#define RUVF		0x0002		/* Sticky Receive Underflow Status				*/
+#define ROVF		0x0004		/* Sticky Receive Overflow Status				*/
+#define TXF			0x0008		/* Transmit FIFO Full Status					*/
+#define TUVF		0x0010		/* Sticky Transmit Underflow Status				*/
+#define TOVF		0x0020		/* Sticky Transmit Overflow Status				*/
+#define TXHRE		0x0040		/* Transmit Hold Register Empty					*/
+
+/* SPORTx_MCMC1 Macros															*/
+#define SP_WOFF(x)	((x) & 0x3FF) 	/* Multichannel Window Offset Field			*/
+
+/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits						*/
+#define SP_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1	*/
+
+/* SPORTx_MCMC2 Masks															*/
+#define REC_BYPASS	0x0000		/* Bypass Mode (No Clock Recovery)				*/
+#define REC_2FROM4	0x0002		/* Recover 2 MHz Clock from 4 MHz Clock			*/
+#define REC_8FROM16	0x0003		/* Recover 8 MHz Clock from 16 MHz Clock		*/
+#define MCDTXPE		0x0004 		/* Multichannel DMA Transmit Packing			*/
+#define MCDRXPE		0x0008 		/* Multichannel DMA Receive Packing				*/
+#define MCMEN		0x0010 		/* Multichannel Frame Mode Enable				*/
+#define FSDR		0x0080 		/* Multichannel Frame Sync to Data Relationship	*/
+#define MFD_0		0x0000		/* Multichannel Frame Delay = 0					*/
+#define MFD_1		0x1000		/* Multichannel Frame Delay = 1					*/
+#define MFD_2		0x2000		/* Multichannel Frame Delay = 2					*/
+#define MFD_3		0x3000		/* Multichannel Frame Delay = 3					*/
+#define MFD_4		0x4000		/* Multichannel Frame Delay = 4					*/
+#define MFD_5		0x5000		/* Multichannel Frame Delay = 5					*/
+#define MFD_6		0x6000		/* Multichannel Frame Delay = 6					*/
+#define MFD_7		0x7000		/* Multichannel Frame Delay = 7					*/
+#define MFD_8		0x8000		/* Multichannel Frame Delay = 8					*/
+#define MFD_9		0x9000		/* Multichannel Frame Delay = 9					*/
+#define MFD_10		0xA000		/* Multichannel Frame Delay = 10				*/
+#define MFD_11		0xB000		/* Multichannel Frame Delay = 11				*/
+#define MFD_12		0xC000		/* Multichannel Frame Delay = 12				*/
+#define MFD_13		0xD000		/* Multichannel Frame Delay = 13				*/
+#define MFD_14		0xE000		/* Multichannel Frame Delay = 14				*/
+#define MFD_15		0xF000		/* Multichannel Frame Delay = 15				*/
+
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001		/* Enable CLKOUT									*/
+#define	AMBEN_NONE		0x0000		/* All Banks Disabled								*/
+#define AMBEN_B0		0x0002		/* Enable Async Memory Bank 0 only					*/
+#define AMBEN_B0_B1		0x0004		/* Enable Async Memory Banks 0 & 1 only				*/
+#define AMBEN_B0_B1_B2	0x0006		/* Enable Async Memory Banks 0, 1, and 2			*/
+#define AMBEN_ALL		0x0008		/* Enable Async Memory Banks (all) 0, 1, 2, and 3	*/
+
+/* EBIU_AMBCTL0 Masks																	*/
+#define B0RDYEN			0x00000001  /* Bank 0 (B0) RDY Enable							*/
+#define B0RDYPOL		0x00000002  /* B0 RDY Active High								*/
+#define B0TT_1			0x00000004  /* B0 Transition Time (Read to Write) = 1 cycle		*/
+#define B0TT_2			0x00000008  /* B0 Transition Time (Read to Write) = 2 cycles	*/
+#define B0TT_3			0x0000000C  /* B0 Transition Time (Read to Write) = 3 cycles	*/
+#define B0TT_4			0x00000000  /* B0 Transition Time (Read to Write) = 4 cycles	*/
+#define B0ST_1			0x00000010  /* B0 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B0ST_2			0x00000020  /* B0 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B0ST_3			0x00000030  /* B0 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B0ST_4			0x00000000  /* B0 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B0HT_1			0x00000040  /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B0HT_2			0x00000080  /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B0HT_3			0x000000C0  /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B0HT_0			0x00000000  /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B0RAT_1			0x00000100  /* B0 Read Access Time = 1 cycle					*/
+#define B0RAT_2			0x00000200  /* B0 Read Access Time = 2 cycles					*/
+#define B0RAT_3			0x00000300  /* B0 Read Access Time = 3 cycles					*/
+#define B0RAT_4			0x00000400  /* B0 Read Access Time = 4 cycles					*/
+#define B0RAT_5			0x00000500  /* B0 Read Access Time = 5 cycles					*/
+#define B0RAT_6			0x00000600  /* B0 Read Access Time = 6 cycles					*/
+#define B0RAT_7			0x00000700  /* B0 Read Access Time = 7 cycles					*/
+#define B0RAT_8			0x00000800  /* B0 Read Access Time = 8 cycles					*/
+#define B0RAT_9			0x00000900  /* B0 Read Access Time = 9 cycles					*/
+#define B0RAT_10		0x00000A00  /* B0 Read Access Time = 10 cycles					*/
+#define B0RAT_11		0x00000B00  /* B0 Read Access Time = 11 cycles					*/
+#define B0RAT_12		0x00000C00  /* B0 Read Access Time = 12 cycles					*/
+#define B0RAT_13		0x00000D00  /* B0 Read Access Time = 13 cycles					*/
+#define B0RAT_14		0x00000E00  /* B0 Read Access Time = 14 cycles					*/
+#define B0RAT_15		0x00000F00  /* B0 Read Access Time = 15 cycles					*/
+#define B0WAT_1			0x00001000  /* B0 Write Access Time = 1 cycle					*/
+#define B0WAT_2			0x00002000  /* B0 Write Access Time = 2 cycles					*/
+#define B0WAT_3			0x00003000  /* B0 Write Access Time = 3 cycles					*/
+#define B0WAT_4			0x00004000  /* B0 Write Access Time = 4 cycles					*/
+#define B0WAT_5			0x00005000  /* B0 Write Access Time = 5 cycles					*/
+#define B0WAT_6			0x00006000  /* B0 Write Access Time = 6 cycles					*/
+#define B0WAT_7			0x00007000  /* B0 Write Access Time = 7 cycles					*/
+#define B0WAT_8			0x00008000  /* B0 Write Access Time = 8 cycles					*/
+#define B0WAT_9			0x00009000  /* B0 Write Access Time = 9 cycles					*/
+#define B0WAT_10		0x0000A000  /* B0 Write Access Time = 10 cycles					*/
+#define B0WAT_11		0x0000B000  /* B0 Write Access Time = 11 cycles					*/
+#define B0WAT_12		0x0000C000  /* B0 Write Access Time = 12 cycles					*/
+#define B0WAT_13		0x0000D000  /* B0 Write Access Time = 13 cycles					*/
+#define B0WAT_14		0x0000E000  /* B0 Write Access Time = 14 cycles					*/
+#define B0WAT_15		0x0000F000  /* B0 Write Access Time = 15 cycles					*/
+
+#define B1RDYEN			0x00010000  /* Bank 1 (B1) RDY Enable                       	*/
+#define B1RDYPOL		0x00020000  /* B1 RDY Active High                           	*/
+#define B1TT_1			0x00040000  /* B1 Transition Time (Read to Write) = 1 cycle 	*/
+#define B1TT_2			0x00080000  /* B1 Transition Time (Read to Write) = 2 cycles	*/
+#define B1TT_3			0x000C0000  /* B1 Transition Time (Read to Write) = 3 cycles	*/
+#define B1TT_4			0x00000000  /* B1 Transition Time (Read to Write) = 4 cycles	*/
+#define B1ST_1			0x00100000  /* B1 Setup Time (AOE to Read/Write) = 1 cycle  	*/
+#define B1ST_2			0x00200000  /* B1 Setup Time (AOE to Read/Write) = 2 cycles 	*/
+#define B1ST_3			0x00300000  /* B1 Setup Time (AOE to Read/Write) = 3 cycles 	*/
+#define B1ST_4			0x00000000  /* B1 Setup Time (AOE to Read/Write) = 4 cycles 	*/
+#define B1HT_1			0x00400000  /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle 	*/
+#define B1HT_2			0x00800000  /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B1HT_3			0x00C00000  /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B1HT_0			0x00000000  /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B1RAT_1			0x01000000  /* B1 Read Access Time = 1 cycle					*/
+#define B1RAT_2			0x02000000  /* B1 Read Access Time = 2 cycles					*/
+#define B1RAT_3			0x03000000  /* B1 Read Access Time = 3 cycles					*/
+#define B1RAT_4			0x04000000  /* B1 Read Access Time = 4 cycles					*/
+#define B1RAT_5			0x05000000  /* B1 Read Access Time = 5 cycles					*/
+#define B1RAT_6			0x06000000  /* B1 Read Access Time = 6 cycles					*/
+#define B1RAT_7			0x07000000  /* B1 Read Access Time = 7 cycles					*/
+#define B1RAT_8			0x08000000  /* B1 Read Access Time = 8 cycles					*/
+#define B1RAT_9			0x09000000  /* B1 Read Access Time = 9 cycles					*/
+#define B1RAT_10		0x0A000000  /* B1 Read Access Time = 10 cycles					*/
+#define B1RAT_11		0x0B000000  /* B1 Read Access Time = 11 cycles					*/
+#define B1RAT_12		0x0C000000  /* B1 Read Access Time = 12 cycles					*/
+#define B1RAT_13		0x0D000000  /* B1 Read Access Time = 13 cycles					*/
+#define B1RAT_14		0x0E000000  /* B1 Read Access Time = 14 cycles					*/
+#define B1RAT_15		0x0F000000  /* B1 Read Access Time = 15 cycles					*/
+#define B1WAT_1			0x10000000  /* B1 Write Access Time = 1 cycle					*/
+#define B1WAT_2			0x20000000  /* B1 Write Access Time = 2 cycles					*/
+#define B1WAT_3			0x30000000  /* B1 Write Access Time = 3 cycles					*/
+#define B1WAT_4			0x40000000  /* B1 Write Access Time = 4 cycles					*/
+#define B1WAT_5			0x50000000  /* B1 Write Access Time = 5 cycles					*/
+#define B1WAT_6			0x60000000  /* B1 Write Access Time = 6 cycles					*/
+#define B1WAT_7			0x70000000  /* B1 Write Access Time = 7 cycles					*/
+#define B1WAT_8			0x80000000  /* B1 Write Access Time = 8 cycles					*/
+#define B1WAT_9			0x90000000  /* B1 Write Access Time = 9 cycles					*/
+#define B1WAT_10		0xA0000000  /* B1 Write Access Time = 10 cycles					*/
+#define B1WAT_11		0xB0000000  /* B1 Write Access Time = 11 cycles					*/
+#define B1WAT_12		0xC0000000  /* B1 Write Access Time = 12 cycles					*/
+#define B1WAT_13		0xD0000000  /* B1 Write Access Time = 13 cycles					*/
+#define B1WAT_14		0xE0000000  /* B1 Write Access Time = 14 cycles					*/
+#define B1WAT_15		0xF0000000  /* B1 Write Access Time = 15 cycles					*/
+
+/* EBIU_AMBCTL1 Masks																	*/
+#define B2RDYEN			0x00000001  /* Bank 2 (B2) RDY Enable							*/
+#define B2RDYPOL		0x00000002  /* B2 RDY Active High								*/
+#define B2TT_1			0x00000004  /* B2 Transition Time (Read to Write) = 1 cycle		*/
+#define B2TT_2			0x00000008  /* B2 Transition Time (Read to Write) = 2 cycles	*/
+#define B2TT_3			0x0000000C  /* B2 Transition Time (Read to Write) = 3 cycles	*/
+#define B2TT_4			0x00000000  /* B2 Transition Time (Read to Write) = 4 cycles	*/
+#define B2ST_1			0x00000010  /* B2 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B2ST_2			0x00000020  /* B2 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B2ST_3			0x00000030  /* B2 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B2ST_4			0x00000000  /* B2 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B2HT_1			0x00000040  /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B2HT_2			0x00000080  /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B2HT_3			0x000000C0  /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B2HT_0			0x00000000  /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B2RAT_1			0x00000100  /* B2 Read Access Time = 1 cycle					*/
+#define B2RAT_2			0x00000200  /* B2 Read Access Time = 2 cycles					*/
+#define B2RAT_3			0x00000300  /* B2 Read Access Time = 3 cycles					*/
+#define B2RAT_4			0x00000400  /* B2 Read Access Time = 4 cycles					*/
+#define B2RAT_5			0x00000500  /* B2 Read Access Time = 5 cycles					*/
+#define B2RAT_6			0x00000600  /* B2 Read Access Time = 6 cycles					*/
+#define B2RAT_7			0x00000700  /* B2 Read Access Time = 7 cycles					*/
+#define B2RAT_8			0x00000800  /* B2 Read Access Time = 8 cycles					*/
+#define B2RAT_9			0x00000900  /* B2 Read Access Time = 9 cycles					*/
+#define B2RAT_10		0x00000A00  /* B2 Read Access Time = 10 cycles					*/
+#define B2RAT_11		0x00000B00  /* B2 Read Access Time = 11 cycles					*/
+#define B2RAT_12		0x00000C00  /* B2 Read Access Time = 12 cycles					*/
+#define B2RAT_13		0x00000D00  /* B2 Read Access Time = 13 cycles					*/
+#define B2RAT_14		0x00000E00  /* B2 Read Access Time = 14 cycles					*/
+#define B2RAT_15		0x00000F00  /* B2 Read Access Time = 15 cycles					*/
+#define B2WAT_1			0x00001000  /* B2 Write Access Time = 1 cycle					*/
+#define B2WAT_2			0x00002000  /* B2 Write Access Time = 2 cycles					*/
+#define B2WAT_3			0x00003000  /* B2 Write Access Time = 3 cycles					*/
+#define B2WAT_4			0x00004000  /* B2 Write Access Time = 4 cycles					*/
+#define B2WAT_5			0x00005000  /* B2 Write Access Time = 5 cycles					*/
+#define B2WAT_6			0x00006000  /* B2 Write Access Time = 6 cycles					*/
+#define B2WAT_7			0x00007000  /* B2 Write Access Time = 7 cycles					*/
+#define B2WAT_8			0x00008000  /* B2 Write Access Time = 8 cycles					*/
+#define B2WAT_9			0x00009000  /* B2 Write Access Time = 9 cycles					*/
+#define B2WAT_10		0x0000A000  /* B2 Write Access Time = 10 cycles					*/
+#define B2WAT_11		0x0000B000  /* B2 Write Access Time = 11 cycles					*/
+#define B2WAT_12		0x0000C000  /* B2 Write Access Time = 12 cycles					*/
+#define B2WAT_13		0x0000D000  /* B2 Write Access Time = 13 cycles					*/
+#define B2WAT_14		0x0000E000  /* B2 Write Access Time = 14 cycles					*/
+#define B2WAT_15		0x0000F000  /* B2 Write Access Time = 15 cycles					*/
+
+#define B3RDYEN			0x00010000  /* Bank 3 (B3) RDY Enable							*/
+#define B3RDYPOL		0x00020000  /* B3 RDY Active High								*/
+#define B3TT_1			0x00040000  /* B3 Transition Time (Read to Write) = 1 cycle		*/
+#define B3TT_2			0x00080000  /* B3 Transition Time (Read to Write) = 2 cycles	*/
+#define B3TT_3			0x000C0000  /* B3 Transition Time (Read to Write) = 3 cycles	*/
+#define B3TT_4			0x00000000  /* B3 Transition Time (Read to Write) = 4 cycles	*/
+#define B3ST_1			0x00100000  /* B3 Setup Time (AOE to Read/Write) = 1 cycle		*/
+#define B3ST_2			0x00200000  /* B3 Setup Time (AOE to Read/Write) = 2 cycles		*/
+#define B3ST_3			0x00300000  /* B3 Setup Time (AOE to Read/Write) = 3 cycles		*/
+#define B3ST_4			0x00000000  /* B3 Setup Time (AOE to Read/Write) = 4 cycles		*/
+#define B3HT_1			0x00400000  /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle		*/
+#define B3HT_2			0x00800000  /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles	*/
+#define B3HT_3			0x00C00000  /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles	*/
+#define B3HT_0			0x00000000  /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles	*/
+#define B3RAT_1			0x01000000  /* B3 Read Access Time = 1 cycle					*/
+#define B3RAT_2			0x02000000  /* B3 Read Access Time = 2 cycles					*/
+#define B3RAT_3			0x03000000  /* B3 Read Access Time = 3 cycles					*/
+#define B3RAT_4			0x04000000  /* B3 Read Access Time = 4 cycles					*/
+#define B3RAT_5			0x05000000  /* B3 Read Access Time = 5 cycles					*/
+#define B3RAT_6			0x06000000  /* B3 Read Access Time = 6 cycles					*/
+#define B3RAT_7			0x07000000  /* B3 Read Access Time = 7 cycles					*/
+#define B3RAT_8			0x08000000  /* B3 Read Access Time = 8 cycles					*/
+#define B3RAT_9			0x09000000  /* B3 Read Access Time = 9 cycles					*/
+#define B3RAT_10		0x0A000000  /* B3 Read Access Time = 10 cycles					*/
+#define B3RAT_11		0x0B000000  /* B3 Read Access Time = 11 cycles					*/
+#define B3RAT_12		0x0C000000  /* B3 Read Access Time = 12 cycles					*/
+#define B3RAT_13		0x0D000000  /* B3 Read Access Time = 13 cycles					*/
+#define B3RAT_14		0x0E000000  /* B3 Read Access Time = 14 cycles					*/
+#define B3RAT_15		0x0F000000  /* B3 Read Access Time = 15 cycles					*/
+#define B3WAT_1			0x10000000  /* B3 Write Access Time = 1 cycle					*/
+#define B3WAT_2			0x20000000  /* B3 Write Access Time = 2 cycles					*/
+#define B3WAT_3			0x30000000  /* B3 Write Access Time = 3 cycles					*/
+#define B3WAT_4			0x40000000  /* B3 Write Access Time = 4 cycles					*/
+#define B3WAT_5			0x50000000  /* B3 Write Access Time = 5 cycles					*/
+#define B3WAT_6			0x60000000  /* B3 Write Access Time = 6 cycles					*/
+#define B3WAT_7			0x70000000  /* B3 Write Access Time = 7 cycles					*/
+#define B3WAT_8			0x80000000  /* B3 Write Access Time = 8 cycles					*/
+#define B3WAT_9			0x90000000  /* B3 Write Access Time = 9 cycles					*/
+#define B3WAT_10		0xA0000000  /* B3 Write Access Time = 10 cycles					*/
+#define B3WAT_11		0xB0000000  /* B3 Write Access Time = 11 cycles					*/
+#define B3WAT_12		0xC0000000  /* B3 Write Access Time = 12 cycles					*/
+#define B3WAT_13		0xD0000000  /* B3 Write Access Time = 13 cycles					*/
+#define B3WAT_14		0xE0000000  /* B3 Write Access Time = 14 cycles					*/
+#define B3WAT_15		0xF0000000  /* B3 Write Access Time = 15 cycles					*/
+
+
+/* **********************  SDRAM CONTROLLER MASKS  **********************************************/
+/* EBIU_SDGCTL Masks																			*/
+#define SCTLE			0x00000001	/* Enable SDRAM Signals										*/
+#define CL_2			0x00000008	/* SDRAM CAS Latency = 2 cycles								*/
+#define CL_3			0x0000000C	/* SDRAM CAS Latency = 3 cycles								*/
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle										*/
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles									*/
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles									*/
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles									*/
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles									*/
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles									*/
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles									*/
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles									*/
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles									*/
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles									*/
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles									*/
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles									*/
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles									*/
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles									*/
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles									*/
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle										*/
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles										*/
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles										*/
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles										*/
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles										*/
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles										*/
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles										*/
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle										*/
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles									*/
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles									*/
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles									*/
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles									*/
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles									*/
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles									*/
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle										*/
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles										*/
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles										*/
+#define PUPSD			0x00200000	/* Power-Up Start Delay (15 SCLK Cycles Delay)				*/
+#define PSM				0x00400000	/* Power-Up Sequence (Mode Register Before/After* Refresh)	*/
+#define PSS				0x00800000	/* Enable Power-Up Sequence on Next SDRAM Access			*/
+#define SRFS			0x01000000	/* Enable SDRAM Self-Refresh Mode							*/
+#define EBUFE			0x02000000	/* Enable External Buffering Timing							*/
+#define FBBRW			0x04000000	/* Enable Fast Back-To-Back Read To Write					*/
+#define EMREN			0x10000000	/* Extended Mode Register Enable							*/
+#define TCSR			0x20000000	/* Temp-Compensated Self-Refresh Value (85/45* Deg C)		*/
+#define CDDBG			0x40000000	/* Tristate SDRAM Controls During Bus Grant					*/
+
+/* EBIU_SDBCTL Masks																		*/
+#define EBE				0x0001		/* Enable SDRAM External Bank							*/
+#define EBSZ_16			0x0000		/* SDRAM External Bank Size = 16MB	*/
+#define EBSZ_32			0x0002		/* SDRAM External Bank Size = 32MB	*/
+#define EBSZ_64			0x0004		/* SDRAM External Bank Size = 64MB	*/
+#define EBSZ_128		0x0006		/* SDRAM External Bank Size = 128MB		*/
+#define EBSZ_256		0x0008		/* SDRAM External Bank Size = 256MB 	*/
+#define EBSZ_512		0x000A		/* SDRAM External Bank Size = 512MB		*/
+#define EBCAW_8			0x0000		/* SDRAM External Bank Column Address Width = 8 Bits	*/
+#define EBCAW_9			0x0010		/* SDRAM External Bank Column Address Width = 9 Bits	*/
+#define EBCAW_10		0x0020		/* SDRAM External Bank Column Address Width = 10 Bits	*/
+#define EBCAW_11		0x0030		/* SDRAM External Bank Column Address Width = 11 Bits	*/
+
+/* EBIU_SDSTAT Masks														*/
+#define SDCI			0x0001		/* SDRAM Controller Idle 				*/
+#define SDSRA			0x0002		/* SDRAM Self-Refresh Active			*/
+#define SDPUA			0x0004		/* SDRAM Power-Up Active 				*/
+#define SDRS			0x0008		/* SDRAM Will Power-Up On Next Access	*/
+#define SDEASE			0x0010		/* SDRAM EAB Sticky Error Status		*/
+#define BGSTAT			0x0020		/* Bus Grant Status						*/
+
+
+/* **************************  DMA CONTROLLER MASKS  ********************************/
+/* DMAx_CONFIG, MDMA_yy_CONFIG Masks												*/
+#define DMAEN			0x0001		/* DMA Channel Enable							*/
+#define WNR				0x0002		/* Channel Direction (W/R*)						*/
+#define WDSIZE_8		0x0000		/* Transfer Word Size = 8						*/
+#define WDSIZE_16		0x0004		/* Transfer Word Size = 16						*/
+#define WDSIZE_32		0x0008		/* Transfer Word Size = 32						*/
+#define DMA2D			0x0010		/* DMA Mode (2D/1D*)							*/
+#define RESTART			0x0020		/* DMA Buffer Clear								*/
+#define DI_SEL			0x0040		/* Data Interrupt Timing Select					*/
+#define DI_EN			0x0080		/* Data Interrupt Enable						*/
+#define NDSIZE_0		0x0000		/* Next Descriptor Size = 0 (Stop/Autobuffer)	*/
+#define NDSIZE_1		0x0100		/* Next Descriptor Size = 1						*/
+#define NDSIZE_2		0x0200		/* Next Descriptor Size = 2						*/
+#define NDSIZE_3		0x0300		/* Next Descriptor Size = 3						*/
+#define NDSIZE_4		0x0400		/* Next Descriptor Size = 4						*/
+#define NDSIZE_5		0x0500		/* Next Descriptor Size = 5						*/
+#define NDSIZE_6		0x0600		/* Next Descriptor Size = 6						*/
+#define NDSIZE_7		0x0700		/* Next Descriptor Size = 7						*/
+#define NDSIZE_8		0x0800		/* Next Descriptor Size = 8						*/
+#define NDSIZE_9		0x0900		/* Next Descriptor Size = 9						*/
+#define NDSIZE	        	0x0900	/* Next Descriptor Size */
+#define DMAFLOW	        	0x7000	/* Flow Control */
+#define DMAFLOW_STOP		0x0000		/* Stop Mode									*/
+#define DMAFLOW_AUTO		0x1000		/* Autobuffer Mode								*/
+#define DMAFLOW_ARRAY		0x4000		/* Descriptor Array Mode						*/
+#define DMAFLOW_SMALL		0x6000		/* Small Model Descriptor List Mode				*/
+#define DMAFLOW_LARGE		0x7000		/* Large Model Descriptor List Mode				*/
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
+#define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)	*/
+#define PMAP			0xF000	/* Peripheral Mapped To This Channel				*/
+#define PMAP_PPI		0x0000	/* 		PPI Port DMA								*/
+#define	PMAP_EMACRX		0x1000	/* 		Ethernet Receive DMA						*/
+#define PMAP_EMACTX		0x2000	/* 		Ethernet Transmit DMA						*/
+#define PMAP_SPORT0RX	0x3000	/* 		SPORT0 Receive DMA							*/
+#define PMAP_SPORT0TX	0x4000	/* 		SPORT0 Transmit DMA							*/
+#define PMAP_SPORT1RX	0x5000	/* 		SPORT1 Receive DMA							*/
+#define PMAP_SPORT1TX	0x6000	/* 		SPORT1 Transmit DMA							*/
+#define PMAP_SPI		0x7000	/* 		SPI Port DMA								*/
+#define PMAP_UART0RX	0x8000	/* 		UART0 Port Receive DMA						*/
+#define PMAP_UART0TX	0x9000	/* 		UART0 Port Transmit DMA						*/
+#define	PMAP_UART1RX	0xA000	/* 		UART1 Port Receive DMA						*/
+#define	PMAP_UART1TX	0xB000	/* 		UART1 Port Transmit DMA						*/
+
+/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks						*/
+#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status	*/
+#define DMA_ERR			0x0002	/* DMA Error Interrupt Status		*/
+#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator	*/
+#define DMA_RUN			0x0008	/* DMA Channel Running Indicator	*/
+
+
+/*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
+/*  PPI_CONTROL Masks													*/
+#define PORT_EN			0x0001		/* PPI Port Enable					*/
+#define PORT_DIR		0x0002		/* PPI Port Direction				*/
+#define XFR_TYPE		0x000C		/* PPI Transfer Type				*/
+#define PORT_CFG		0x0030		/* PPI Port Configuration			*/
+#define FLD_SEL			0x0040		/* PPI Active Field Select			*/
+#define PACK_EN			0x0080		/* PPI Packing Mode					*/
+#define DMA32			0x0100		/* PPI 32-bit DMA Enable			*/
+#define SKIP_EN			0x0200		/* PPI Skip Element Enable			*/
+#define SKIP_EO			0x0400		/* PPI Skip Even/Odd Elements		*/
+#define DLEN_8			0x0000		/* Data Length = 8 Bits				*/
+#define DLEN_10			0x0800		/* Data Length = 10 Bits			*/
+#define DLEN_11			0x1000		/* Data Length = 11 Bits			*/
+#define DLEN_12			0x1800		/* Data Length = 12 Bits			*/
+#define DLEN_13			0x2000		/* Data Length = 13 Bits			*/
+#define DLEN_14			0x2800		/* Data Length = 14 Bits			*/
+#define DLEN_15			0x3000		/* Data Length = 15 Bits			*/
+#define DLEN_16			0x3800		/* Data Length = 16 Bits			*/
+#define DLENGTH			0x3800		/* PPI Data Length  */
+#define POLC			0x4000		/* PPI Clock Polarity				*/
+#define POLS			0x8000		/* PPI Frame Sync Polarity			*/
+
+/* PPI_STATUS Masks														*/
+#define FLD				0x0400		/* Field Indicator					*/
+#define FT_ERR			0x0800		/* Frame Track Error				*/
+#define OVR				0x1000		/* FIFO Overflow Error				*/
+#define UNDR			0x2000		/* FIFO Underrun Error				*/
+#define ERR_DET			0x4000		/* Error Detected Indicator			*/
+#define ERR_NCOR		0x8000		/* Error Not Corrected Indicator	*/
+
+
+/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
+#define	CLKLOW(x)	((x) & 0xFF)		/* Periods Clock Is Held Low			*/
+#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low			*/
+
+/* TWI_PRESCALE Masks															*/
+#define	PRESCALE	0x007F		/* SCLKs Per Internal Time Reference (10MHz)	*/
+#define	TWI_ENA		0x0080		/* TWI Enable									*/
+#define	SCCB		0x0200		/* SCCB Compatibility Enable					*/
+
+/* TWI_SLAVE_CTRL Masks															*/
+#define	SEN			0x0001		/* Slave Enable									*/
+#define	SADD_LEN	0x0002		/* Slave Address Length							*/
+#define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
+#define	NAK			0x0008		/* NAK/ACK* Generated At Conclusion Of Transfer */
+#define	GEN			0x0010		/* General Call Adrress Matching Enabled		*/
+
+/* TWI_SLAVE_STAT Masks															*/
+#define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
+#define GCALL		0x0002		/* General Call Indicator						*/
+
+/* TWI_MASTER_CTRL Masks													*/
+#define	MEN			0x0001		/* Master Mode Enable						*/
+#define	MADD_LEN	0x0002		/* Master Address Length					*/
+#define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*)		*/
+#define	FAST		0x0008		/* Use Fast Mode Timing Specs				*/
+#define	STOP		0x0010		/* Issue Stop Condition						*/
+#define	RSTART		0x0020		/* Repeat Start or Stop* At End Of Transfer	*/
+#define	DCNT		0x3FC0		/* Data Bytes To Transfer					*/
+#define	SDAOVR		0x4000		/* Serial Data Override						*/
+#define	SCLOVR		0x8000		/* Serial Clock Override					*/
+
+/* TWI_MASTER_STAT Masks														*/
+#define	MPROG		0x0001		/* Master Transfer In Progress					*/
+#define	LOSTARB		0x0002		/* Lost Arbitration Indicator (Xfer Aborted)	*/
+#define	ANAK		0x0004		/* Address Not Acknowledged						*/
+#define	DNAK		0x0008		/* Data Not Acknowledged						*/
+#define	BUFRDERR	0x0010		/* Buffer Read Error							*/
+#define	BUFWRERR	0x0020		/* Buffer Write Error							*/
+#define	SDASEN		0x0040		/* Serial Data Sense							*/
+#define	SCLSEN		0x0080		/* Serial Clock Sense							*/
+#define	BUSBUSY		0x0100		/* Bus Busy Indicator							*/
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
+#define	SINIT		0x0001		/* Slave Transfer Initiated	*/
+#define	SCOMP		0x0002		/* Slave Transfer Complete	*/
+#define	SERR		0x0004		/* Slave Transfer Error		*/
+#define	SOVF		0x0008		/* Slave Overflow			*/
+#define	MCOMP		0x0010		/* Master Transfer Complete	*/
+#define	MERR		0x0020		/* Master Transfer Error	*/
+#define	XMTSERV		0x0040		/* Transmit FIFO Service	*/
+#define	RCVSERV		0x0080		/* Receive FIFO Service		*/
+
+/* TWI_FIFO_CTRL Masks												*/
+#define	XMTFLUSH	0x0001		/* Transmit Buffer Flush			*/
+#define	RCVFLUSH	0x0002		/* Receive Buffer Flush				*/
+#define	XMTINTLEN	0x0004		/* Transmit Buffer Interrupt Length	*/
+#define	RCVINTLEN	0x0008		/* Receive Buffer Interrupt Length	*/
+
+/* TWI_FIFO_STAT Masks															*/
+#define	XMTSTAT		0x0003		/* Transmit FIFO Status							*/
+#define	XMT_EMPTY	0x0000		/* 		Transmit FIFO Empty						*/
+#define	XMT_HALF	0x0001		/* 		Transmit FIFO Has 1 Byte To Write		*/
+#define	XMT_FULL	0x0003		/* 		Transmit FIFO Full (2 Bytes To Write)	*/
+
+#define	RCVSTAT		0x000C		/* Receive FIFO Status							*/
+#define	RCV_EMPTY	0x0000		/* 		Receive FIFO Empty						*/
+#define	RCV_HALF	0x0004		/* 		Receive FIFO Has 1 Byte To Read			*/
+#define	RCV_FULL	0x000C		/* 		Receive FIFO Full (2 Bytes To Read)		*/
+
+
+/* Omit CAN masks from defBF534.h */
+
+/*  *******************  PIN CONTROL REGISTER MASKS  ************************/
+/* PORT_MUX Masks															*/
+#define	PJSE			0x0001			/* Port J SPI/SPORT Enable			*/
+#define	PJSE_SPORT		0x0000			/* 		Enable TFS0/DT0PRI			*/
+#define	PJSE_SPI		0x0001			/* 		Enable SPI_SSEL3:2			*/
+
+#define	PJCE(x)			(((x)&0x3)<<1)	/* Port J CAN/SPI/SPORT Enable		*/
+#define	PJCE_SPORT		0x0000			/* 		Enable DR0SEC/DT0SEC		*/
+#define	PJCE_CAN		0x0002			/* 		Enable CAN RX/TX			*/
+#define	PJCE_SPI		0x0004			/* 		Enable SPI_SSEL7			*/
+
+#define	PFDE			0x0008			/* Port F DMA Request Enable		*/
+#define	PFDE_UART		0x0000			/* 		Enable UART0 RX/TX			*/
+#define	PFDE_DMA		0x0008			/* 		Enable DMAR1:0				*/
+
+#define	PFTE			0x0010			/* Port F Timer Enable				*/
+#define	PFTE_UART		0x0000			/*		Enable UART1 RX/TX			*/
+#define	PFTE_TIMER		0x0010			/* 		Enable TMR7:6				*/
+
+#define	PFS6E			0x0020			/* Port F SPI SSEL 6 Enable			*/
+#define	PFS6E_TIMER		0x0000			/*		Enable TMR5					*/
+#define	PFS6E_SPI		0x0020			/* 		Enable SPI_SSEL6			*/
+
+#define	PFS5E			0x0040			/* Port F SPI SSEL 5 Enable			*/
+#define	PFS5E_TIMER		0x0000			/*		Enable TMR4					*/
+#define	PFS5E_SPI		0x0040			/* 		Enable SPI_SSEL5			*/
+
+#define	PFS4E			0x0080			/* Port F SPI SSEL 4 Enable			*/
+#define	PFS4E_TIMER		0x0000			/*		Enable TMR3					*/
+#define	PFS4E_SPI		0x0080			/* 		Enable SPI_SSEL4			*/
+
+#define	PFFE			0x0100			/* Port F PPI Frame Sync Enable		*/
+#define	PFFE_TIMER		0x0000			/* 		Enable TMR2					*/
+#define	PFFE_PPI		0x0100			/* 		Enable PPI FS3				*/
+
+#define	PGSE			0x0200			/* Port G SPORT1 Secondary Enable	*/
+#define	PGSE_PPI		0x0000			/* 		Enable PPI D9:8				*/
+#define	PGSE_SPORT		0x0200			/* 		Enable DR1SEC/DT1SEC		*/
+
+#define	PGRE			0x0400			/* Port G SPORT1 Receive Enable		*/
+#define	PGRE_PPI		0x0000			/* 		Enable PPI D12:10			*/
+#define	PGRE_SPORT		0x0400			/* 		Enable DR1PRI/RFS1/RSCLK1	*/
+
+#define	PGTE			0x0800			/* Port G SPORT1 Transmit Enable	*/
+#define	PGTE_PPI		0x0000			/* 		Enable PPI D15:13			*/
+#define	PGTE_SPORT		0x0800			/* 		Enable DT1PRI/TFS1/TSCLK1	*/
+
+
+/*  ******************  HANDSHAKE DMA (HDMA) MASKS  *********************/
+/* HDMAx_CTL Masks														*/
+#define	HMDMAEN		0x0001	/* Enable Handshake DMA 0/1					*/
+#define	REP			0x0002	/* HDMA Request Polarity					*/
+#define	UTE			0x0004	/* Urgency Threshold Enable					*/
+#define	OIE			0x0010	/* Overflow Interrupt Enable				*/
+#define	BDIE		0x0020	/* Block Done Interrupt Enable				*/
+#define	MBDI		0x0040	/* Mask Block Done IRQ If Pending ECNT		*/
+#define	DRQ			0x0300	/* HDMA Request Type						*/
+#define	DRQ_NONE	0x0000	/* 		No Request							*/
+#define	DRQ_SINGLE	0x0100	/* 		Channels Request Single				*/
+#define	DRQ_MULTI	0x0200	/* 		Channels Request Multi (Default)	*/
+#define	DRQ_URGENT	0x0300	/* 		Channels Request Multi Urgent		*/
+#define	RBC			0x1000	/* Reload BCNT With IBCNT					*/
+#define	PS			0x2000	/* HDMA Pin Status							*/
+#define	OI			0x4000	/* Overflow Interrupt Generated				*/
+#define	BDI			0x8000	/* Block Done Interrupt Generated			*/
+
+/* entry addresses of the user-callable Boot ROM functions */
+
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
+#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
+#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
+#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
+#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define	PGDE_UART   PFDE_UART
+#define	PGDE_DMA    PFDE_DMA
+#define	CKELOW		SCKELOW
+
+/* ==== end from defBF534.h ==== */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03400   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03404   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03408   /* HOST Acknowledge Mode Timeout Register */
+
+/* Counter Registers */
+
+#define                       CNT_CONFIG  0xffc03500   /* Configuration Register */
+#define                        CNT_IMASK  0xffc03504   /* Interrupt Mask Register */
+#define                       CNT_STATUS  0xffc03508   /* Status Register */
+#define                      CNT_COMMAND  0xffc0350c   /* Command Register */
+#define                     CNT_DEBOUNCE  0xffc03510   /* Debounce Register */
+#define                      CNT_COUNTER  0xffc03514   /* Counter Register */
+#define                          CNT_MAX  0xffc03518   /* Maximal Count Register */
+#define                          CNT_MIN  0xffc0351c   /* Minimal Count Register */
+
+/* OTP/FUSE Registers */
+
+#define                      OTP_CONTROL  0xffc03600   /* OTP/Fuse Control Register */
+#define                          OTP_BEN  0xffc03604   /* OTP/Fuse Byte Enable */
+#define                       OTP_STATUS  0xffc03608   /* OTP/Fuse Status */
+#define                       OTP_TIMING  0xffc0360c   /* OTP/Fuse Access Timing */
+
+/* Security Registers */
+
+#define                    SECURE_SYSSWT  0xffc03620   /* Secure System Switches */
+#define                   SECURE_CONTROL  0xffc03624   /* Secure Control */
+#define                    SECURE_STATUS  0xffc03628   /* Secure Status */
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define                        OTP_DATA0  0xffc03680   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA1  0xffc03684   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA2  0xffc03688   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA3  0xffc0368c   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+
+/* NFC Registers */
+
+#define                          NFC_CTL  0xffc03700   /* NAND Control Register */
+#define                         NFC_STAT  0xffc03704   /* NAND Status Register */
+#define                      NFC_IRQSTAT  0xffc03708   /* NAND Interrupt Status Register */
+#define                      NFC_IRQMASK  0xffc0370c   /* NAND Interrupt Mask Register */
+#define                         NFC_ECC0  0xffc03710   /* NAND ECC Register 0 */
+#define                         NFC_ECC1  0xffc03714   /* NAND ECC Register 1 */
+#define                         NFC_ECC2  0xffc03718   /* NAND ECC Register 2 */
+#define                         NFC_ECC3  0xffc0371c   /* NAND ECC Register 3 */
+#define                        NFC_COUNT  0xffc03720   /* NAND ECC Count Register */
+#define                          NFC_RST  0xffc03724   /* NAND ECC Reset Register */
+#define                        NFC_PGCTL  0xffc03728   /* NAND Page Control Register */
+#define                         NFC_READ  0xffc0372c   /* NAND Read Data Register */
+#define                         NFC_ADDR  0xffc03740   /* NAND Address Register */
+#define                          NFC_CMD  0xffc03744   /* NAND Command Register */
+#define                      NFC_DATA_WR  0xffc03748   /* NAND Data Write Register */
+#define                      NFC_DATA_RD  0xffc0374c   /* NAND Data Read Register */
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for HOST_CONTROL */
+
+#define                   HOST_CNTR_HOST_EN  0x1        /* Host Enable */
+#define                  HOST_CNTR_nHOST_EN  0x0
+#define                  HOST_CNTR_HOST_END  0x2        /* Host Endianess */
+#define                 HOST_CNTR_nHOST_END  0x0
+#define                 HOST_CNTR_DATA_SIZE  0x4        /* Data Size */
+#define                HOST_CNTR_nDATA_SIZE  0x0
+#define                  HOST_CNTR_HOST_RST  0x8        /* Host Reset */
+#define                 HOST_CNTR_nHOST_RST  0x0
+#define                  HOST_CNTR_HRDY_OVR  0x20       /* Host Ready Override */
+#define                 HOST_CNTR_nHRDY_OVR  0x0
+#define                  HOST_CNTR_INT_MODE  0x40       /* Interrupt Mode */
+#define                 HOST_CNTR_nINT_MODE  0x0
+#define                     HOST_CNTR_BT_EN  0x80       /* Bus Timeout Enable */
+#define                   HOST_CNTR_ nBT_EN  0x0
+#define                       HOST_CNTR_EHW  0x100      /* Enable Host Write */
+#define                      HOST_CNTR_nEHW  0x0
+#define                       HOST_CNTR_EHR  0x200      /* Enable Host Read */
+#define                      HOST_CNTR_nEHR  0x0
+#define                       HOST_CNTR_BDR  0x400      /* Burst DMA Requests */
+#define                      HOST_CNTR_nBDR  0x0
+
+/* Bit masks for HOST_STATUS */
+
+#define                     HOST_STAT_READY  0x1        /* DMA Ready */
+#define                    HOST_STAT_nREADY  0x0
+#define                  HOST_STAT_FIFOFULL  0x2        /* FIFO Full */
+#define                 HOST_STAT_nFIFOFULL  0x0
+#define                 HOST_STAT_FIFOEMPTY  0x4        /* FIFO Empty */
+#define                HOST_STAT_nFIFOEMPTY  0x0
+#define                  HOST_STAT_COMPLETE  0x8        /* DMA Complete */
+#define                 HOST_STAT_nCOMPLETE  0x0
+#define                      HOST_STAT_HSHK  0x10       /* Host Handshake */
+#define                     HOST_STAT_nHSHK  0x0
+#define                   HOST_STAT_TIMEOUT  0x20       /* Host Timeout */
+#define                  HOST_STAT_nTIMEOUT  0x0
+#define                      HOST_STAT_HIRQ  0x40       /* Host Interrupt Request */
+#define                     HOST_STAT_nHIRQ  0x0
+#define                HOST_STAT_ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define               HOST_STAT_nALLOW_CNFG  0x0
+#define                   HOST_STAT_DMA_DIR  0x100      /* DMA Direction */
+#define                  HOST_STAT_nDMA_DIR  0x0
+#define                       HOST_STAT_BTE  0x200      /* Bus Timeout Enabled */
+#define                      HOST_STAT_nBTE  0x0
+#define               HOST_STAT_HOSTRD_DONE  0x8000     /* Host Read Completion Interrupt */
+#define              HOST_STAT_nHOSTRD_DONE  0x0
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+
+/* Bit masks for CNT_CONFIG */
+
+#define                      CNTE  0x1        /* Counter Enable */
+#define                     nCNTE  0x0
+#define                      DEBE  0x2        /* Debounce Enable */
+#define                     nDEBE  0x0
+#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
+#define                   nCDGINV  0x0
+#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
+#define                   nCUDINV  0x0
+#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
+#define                   nCZMINV  0x0
+#define                   CNTMODE  0x700      /* Counter Operating Mode */
+#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
+#define                     nZMZC  0x0
+#define                   BNDMODE  0x3000     /* Boundary register Mode */
+#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
+#define                   nINPDIS  0x0
+
+/* Bit masks for CNT_IMASK */
+
+#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
+#define                     nICIE  0x0
+#define                      UCIE  0x2        /* Up count Interrupt Enable */
+#define                     nUCIE  0x0
+#define                      DCIE  0x4        /* Down count Interrupt Enable */
+#define                     nDCIE  0x0
+#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
+#define                   nMINCIE  0x0
+#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
+#define                   nMAXCIE  0x0
+#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
+#define                  nCOV31IE  0x0
+#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
+#define                  nCOV15IE  0x0
+#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
+#define                  nCZEROIE  0x0
+#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
+#define                    nCZMIE  0x0
+#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
+#define                   nCZMEIE  0x0
+#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
+#define                   nCZMZIE  0x0
+
+/* Bit masks for CNT_STATUS */
+
+#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
+#define                     nICII  0x0
+#define                      UCII  0x2        /* Up count Interrupt Identifier */
+#define                     nUCII  0x0
+#define                      DCII  0x4        /* Down count Interrupt Identifier */
+#define                     nDCII  0x0
+#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
+#define                   nMINCII  0x0
+#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
+#define                   nMAXCII  0x0
+#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
+#define                  nCOV31II  0x0
+#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
+#define                  nCOV15II  0x0
+#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
+#define                  nCZEROII  0x0
+#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
+#define                    nCZMII  0x0
+#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
+#define                   nCZMEII  0x0
+#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
+#define                   nCZMZII  0x0
+
+/* Bit masks for CNT_COMMAND */
+
+#define                    W1LCNT  0xf        /* Load Counter Register */
+#define                    W1LMIN  0xf0       /* Load Min Register */
+#define                    W1LMAX  0xf00      /* Load Max Register */
+#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
+#define                 nW1ZMONCE  0x0
+
+/* Bit masks for CNT_DEBOUNCE */
+
+#define                 DPRESCALE  0xf        /* Load Counter Register */
+
+/* Bit masks for OTP_CONTROL */
+
+#define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
+#define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
+#define                     nFIEN  0x0
+#define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
+#define                 nFTESTDEC  0x0
+#define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
+#define                  nFWRTEST  0x0
+#define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
+#define                    nFRDEN  0x0
+#define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
+#define                    nFWREN  0x0
+
+/* Bit masks for OTP_BEN */
+
+#define                      FBEN  0xffff     /* OTP/Fuse Byte Enable */
+
+/* Bit masks for OTP_STATUS */
+
+#define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
+#define                    nFCOMP  0x0
+#define                    FERROR  0x2        /* OTP/Fuse Access Error */
+#define                   nFERROR  0x0
+#define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
+#define                 nMMRGLOAD  0x0
+#define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
+#define                 nMMRGLOCK  0x0
+#define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
+#define                   nFPGMEN  0x0
+
+/* Bit masks for OTP_TIMING */
+
+#define                   USECDIV  0xff       /* Micro Second Divider */
+#define                   READACC  0x7f00     /* Read Access Time */
+#define                   CPUMPRL  0x38000    /* Charge Pump Release Time */
+#define                   CPUMPSU  0xc0000    /* Charge Pump Setup Time */
+#define                   CPUMPHD  0xf00000   /* Charge Pump Hold Time */
+#define                   PGMTIME  0xff000000 /* Program Time */
+
+/* Bit masks for SECURE_SYSSWT */
+
+#define                   EMUDABL  0x1        /* Emulation Disable. */
+#define                  nEMUDABL  0x0
+#define                   RSTDABL  0x2        /* Reset Disable */
+#define                  nRSTDABL  0x0
+#define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
+#define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
+#define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
+#define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
+#define                  nDMA0OVR  0x0
+#define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
+#define                  nDMA1OVR  0x0
+#define                    EMUOVR  0x4000     /* Emulation Override */
+#define                   nEMUOVR  0x0
+#define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
+#define                   nOTPSEN  0x0
+#define                    L2DABL  0x70000    /* L2 Memory Disable. */
+
+/* Bit masks for SECURE_CONTROL */
+
+#define                   SECURE0  0x1        /* SECURE 0 */
+#define                  nSECURE0  0x0
+#define                   SECURE1  0x2        /* SECURE 1 */
+#define                  nSECURE1  0x0
+#define                   SECURE2  0x4        /* SECURE 2 */
+#define                  nSECURE2  0x0
+#define                   SECURE3  0x8        /* SECURE 3 */
+#define                  nSECURE3  0x0
+
+/* Bit masks for SECURE_STATUS */
+
+#define                   SECMODE  0x3        /* Secured Mode Control State */
+#define                       NMI  0x4        /* Non Maskable Interrupt */
+#define                      nNMI  0x0
+#define                   AFVALID  0x8        /* Authentication Firmware Valid */
+#define                  nAFVALID  0x0
+#define                    AFEXIT  0x10       /* Authentication Firmware Exit */
+#define                   nAFEXIT  0x0
+#define                   SECSTAT  0xe0       /* Secure Status */
+
+/* Bit masks for NFC_CTL */
+
+#define                    WR_DLY  0xf        /* Write Strobe Delay */
+#define                    RD_DLY  0xf0       /* Read Strobe Delay */
+#define                    NWIDTH  0x100      /* NAND Data Width */
+#define                   nNWIDTH  0x0
+#define                   PG_SIZE  0x200      /* Page Size */
+#define                  nPG_SIZE  0x0
+
+/* Bit masks for NFC_STAT */
+
+#define                     NBUSY  0x1        /* Not Busy */
+#define                    nNBUSY  0x0
+#define                   WB_FULL  0x2        /* Write Buffer Full */
+#define                  nWB_FULL  0x0
+#define                PG_WR_STAT  0x4        /* Page Write Pending */
+#define               nPG_WR_STAT  0x0
+#define                PG_RD_STAT  0x8        /* Page Read Pending */
+#define               nPG_RD_STAT  0x0
+#define                  WB_EMPTY  0x10       /* Write Buffer Empty */
+#define                 nWB_EMPTY  0x0
+
+/* Bit masks for NFC_IRQSTAT */
+
+#define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
+#define                 nNBUSYIRQ  0x0
+#define                    WB_OVF  0x2        /* Write Buffer Overflow */
+#define                   nWB_OVF  0x0
+#define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
+#define                  nWB_EDGE  0x0
+#define                    RD_RDY  0x8        /* Read Data Ready */
+#define                   nRD_RDY  0x0
+#define                   WR_DONE  0x10       /* Page Write Done */
+#define                  nWR_DONE  0x0
+
+/* Bit masks for NFC_IRQMASK */
+
+#define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
+#define             nMASK_BUSYIRQ  0x0
+#define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
+#define               nMASK_WBOVF  0x0
+#define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
+#define             nMASK_WBEMPTY  0x0
+#define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
+#define               nMASK_RDRDY  0x0
+#define               MASK_WRDONE  0x10       /* Mask Write Done */
+#define              nMASK_WRDONE  0x0
+
+/* Bit masks for NFC_RST */
+
+#define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
+#define                  nECC_RST  0x0
+
+/* Bit masks for NFC_PGCTL */
+
+#define               PG_RD_START  0x1        /* Page Read Start */
+#define              nPG_RD_START  0x0
+#define               PG_WR_START  0x2        /* Page Write Start */
+#define              nPG_WR_START  0x0
+
+/* Bit masks for NFC_ECC0 */
+
+#define                      ECC0  0x7ff      /* Parity Calculation Result0 */
+
+/* Bit masks for NFC_ECC1 */
+
+#define                      ECC1  0x7ff      /* Parity Calculation Result1 */
+
+/* Bit masks for NFC_ECC2 */
+
+#define                      ECC2  0x7ff      /* Parity Calculation Result2 */
+
+/* Bit masks for NFC_ECC3 */
+
+#define                      ECC3  0x7ff      /* Parity Calculation Result3 */
+
+/* Bit masks for NFC_COUNT */
+
+#define                    ECCCNT  0x3ff      /* Transfer Count */
+
+
+#endif /* _DEF_BF52X_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h
new file mode 100644
index 00000000000..49dd693223e
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/dma.h
@@ -0,0 +1,62 @@
+/*
+ * file:        include/asm-blackfin/mach-bf527/dma.h
+ * based on:	include/asm-blackfin/mach-bf537/dma.h
+ * author:	Michael Hennerich (michael.hennerich@analog.com)
+ *
+ * created:
+ * description:
+ *	system DMA map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_BLACKFIN_DMA_CHANNEL 16
+
+#define CH_PPI 			0	/* PPI receive/transmit or NFC */
+#define CH_EMAC_RX 		1	/* Ethernet MAC receive or HOSTDP */
+#define CH_EMAC_HOSTDP 		1	/* Ethernet MAC receive or HOSTDP */
+#define CH_EMAC_TX 		2	/* Ethernet MAC transmit or NFC */
+#define CH_SPORT0_RX 		3	/* SPORT0 receive */
+#define CH_SPORT0_TX 		4	/* SPORT0 transmit */
+#define CH_SPORT1_RX 		5	/* SPORT1 receive */
+#define CH_SPORT1_TX 		6	/* SPORT1 transmit */
+#define CH_SPI 			7	/* SPI transmit/receive */
+#define CH_UART0_RX 		8	/* UART0 receive */
+#define CH_UART0_TX 		9	/* UART0 transmit */
+#define CH_UART1_RX 		10	/* UART1 receive */
+#define CH_UART1_TX 		11	/* UART1 transmit */
+
+#define CH_MEM_STREAM0_DEST	12	/* TX */
+#define CH_MEM_STREAM0_SRC  	13	/* RX */
+#define CH_MEM_STREAM1_DEST	14	/* TX */
+#define CH_MEM_STREAM1_SRC 	15	/* RX */
+
+#if defined(CONFIG_BF527_NAND_D_PORTF)
+#define CH_NFC			CH_PPI	/* PPI receive/transmit or NFC */
+#elif defined(CONFIG_BF527_NAND_D_PORTH)
+#define CH_NFC			CH_EMAC_TX /* PPI receive/transmit or NFC */
+#endif
+
+#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
new file mode 100644
index 00000000000..4e2b3f2020e
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
@@ -0,0 +1,259 @@
+/*
+ * file:	include/asm-blackfin/mach-bf527/irq.h
+ * based on:	include/asm-blackfin/mach-bf537/irq.h
+ * author:	Michael Hennerich (michael.hennerich@analog.com)
+ *
+ * created:
+ * description:
+ *	system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _BF527_IRQ_H_
+#define _BF527_IRQ_H_
+
+/*
+ * Interrupt source definitions
+	Event Source    Core Event Name
+	Core        Emulation               **
+	Events         (highest priority)  EMU         0
+	Reset                   RST         1
+	NMI                     NMI         2
+	Exception               EVX         3
+	Reserved                --          4
+	Hardware Error          IVHW        5
+	Core Timer              IVTMR       6 *
+
+	.....
+
+	 Software Interrupt 1    IVG14       31
+	 Software Interrupt 2    --
+	 (lowest priority)  IVG15       32 *
+*/
+
+#define NR_PERI_INTS    (2 * 32)
+
+/* The ABSTRACT IRQ definitions */
+/** the first seven of the following are fixed, the rest you change if you need to **/
+#define IRQ_EMU			0	/* Emulation */
+#define IRQ_RST			1	/* reset */
+#define IRQ_NMI			2	/* Non Maskable */
+#define IRQ_EVX			3	/* Exception */
+#define IRQ_UNUSED		4	/* - unused interrupt */
+#define IRQ_HWERR		5	/* Hardware Error */
+#define IRQ_CORETMR		6	/* Core timer */
+
+#define BFIN_IRQ(x)		((x) + 7)
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMA0_ERROR		BFIN_IRQ(1)	/* DMA Error 0 (generic) */
+#define IRQ_DMAR0_BLK		BFIN_IRQ(2)	/* DMAR0 Block Interrupt */
+#define IRQ_DMAR1_BLK		BFIN_IRQ(3)	/* DMAR1 Block Interrupt */
+#define IRQ_DMAR0_OVR		BFIN_IRQ(4)	/* DMAR0 Overflow Error */
+#define IRQ_DMAR1_OVR		BFIN_IRQ(5)	/* DMAR1 Overflow Error */
+#define IRQ_PPI_ERROR		BFIN_IRQ(6)	/* PPI Error */
+#define IRQ_MAC_ERROR		BFIN_IRQ(7)	/* MAC Status */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(8)	/* SPORT0 Status */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(9)	/* SPORT1 Status */
+#define IRQ_UART0_ERROR		BFIN_IRQ(12)	/* UART0 Status */
+#define IRQ_UART1_ERROR		BFIN_IRQ(13)	/* UART1 Status */
+#define IRQ_RTC			BFIN_IRQ(14)	/* RTC */
+#define IRQ_PPI      		BFIN_IRQ(15)	/* DMA Channel 0 (PPI/NAND) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(16)	/* DMA 3 Channel (SPORT0 RX) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(17)	/* DMA 4 Channel (SPORT0 TX) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(18)	/* DMA 5 Channel (SPORT1 RX) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(19)	/* DMA 6 Channel (SPORT1 TX) */
+#define IRQ_TWI      		BFIN_IRQ(20)	/* TWI */
+#define IRQ_SPI      		BFIN_IRQ(21)	/* DMA 7 Channel (SPI) */
+#define IRQ_UART0_RX 		BFIN_IRQ(22)	/* DMA8 Channel (UART0 RX) */
+#define IRQ_UART0_TX 		BFIN_IRQ(23)	/* DMA9 Channel (UART0 TX) */
+#define IRQ_UART1_RX 		BFIN_IRQ(24)	/* DMA10 Channel (UART1 RX) */
+#define IRQ_UART1_TX 		BFIN_IRQ(25)	/* DMA11 Channel (UART1 TX) */
+#define IRQ_OPTSEC   		BFIN_IRQ(26)	/* OTPSEC Interrupt */
+#define IRQ_CNT   		BFIN_IRQ(27)	/* GP Counter */
+#define IRQ_MAC_RX   		BFIN_IRQ(28)	/* DMA1 Channel (MAC RX/HDMA) */
+#define IRQ_PORTH_INTA   	BFIN_IRQ(29)	/* Port H Interrupt A */
+#define IRQ_MAC_TX		BFIN_IRQ(30)	/* DMA2 Channel (MAC TX/NAND) */
+#define IRQ_NFC			BFIN_IRQ(30)	/* DMA2 Channel (MAC TX/NAND) */
+#define IRQ_PORTH_INTB		BFIN_IRQ(31)	/* Port H Interrupt B */
+#define IRQ_TMR0		BFIN_IRQ(32)	/* Timer 0 */
+#define IRQ_TMR1		BFIN_IRQ(33)	/* Timer 1 */
+#define IRQ_TMR2		BFIN_IRQ(34)	/* Timer 2 */
+#define IRQ_TMR3		BFIN_IRQ(35)	/* Timer 3 */
+#define IRQ_TMR4		BFIN_IRQ(36)	/* Timer 4 */
+#define IRQ_TMR5		BFIN_IRQ(37)	/* Timer 5 */
+#define IRQ_TMR6		BFIN_IRQ(38)	/* Timer 6 */
+#define IRQ_TMR7		BFIN_IRQ(39)	/* Timer 7 */
+#define IRQ_PORTG_INTA		BFIN_IRQ(40)	/* Port G Interrupt A */
+#define IRQ_PORTG_INTB		BFIN_IRQ(41)	/* Port G Interrupt B */
+#define IRQ_MEM_DMA0		BFIN_IRQ(42)	/* MDMA Stream 0 */
+#define IRQ_MEM_DMA1		BFIN_IRQ(43)	/* MDMA Stream 1 */
+#define IRQ_WATCH		BFIN_IRQ(44)	/* Software Watchdog Timer */
+#define IRQ_PORTF_INTA		BFIN_IRQ(45)	/* Port F Interrupt A */
+#define IRQ_PORTF_INTB		BFIN_IRQ(46)	/* Port F Interrupt B */
+#define IRQ_SPI_ERROR		BFIN_IRQ(47)	/* SPI Status */
+#define IRQ_NFC_ERROR		BFIN_IRQ(48)	/* NAND Error */
+#define IRQ_HDMA_ERROR		BFIN_IRQ(49)	/* HDMA Error */
+#define IRQ_HDMA		BFIN_IRQ(50)	/* HDMA (TFI) */
+#define IRQ_USB_EINT		BFIN_IRQ(51)	/* USB_EINT Interrupt */
+#define IRQ_USB_INT0		BFIN_IRQ(52)	/* USB_INT0 Interrupt */
+#define IRQ_USB_INT1		BFIN_IRQ(53)	/* USB_INT1 Interrupt */
+#define IRQ_USB_INT2		BFIN_IRQ(54)	/* USB_INT2 Interrupt */
+#define IRQ_USB_DMA		BFIN_IRQ(55)	/* USB_DMAINT Interrupt */
+
+#define SYS_IRQS        	BFIN_IRQ(63)	/* 70 */
+
+#define IRQ_PF0         71
+#define IRQ_PF1         72
+#define IRQ_PF2         73
+#define IRQ_PF3         74
+#define IRQ_PF4         75
+#define IRQ_PF5         76
+#define IRQ_PF6         77
+#define IRQ_PF7         78
+#define IRQ_PF8         79
+#define IRQ_PF9         80
+#define IRQ_PF10        81
+#define IRQ_PF11        82
+#define IRQ_PF12        83
+#define IRQ_PF13        84
+#define IRQ_PF14        85
+#define IRQ_PF15        86
+
+#define IRQ_PG0         87
+#define IRQ_PG1         88
+#define IRQ_PG2         89
+#define IRQ_PG3         90
+#define IRQ_PG4         91
+#define IRQ_PG5         92
+#define IRQ_PG6         93
+#define IRQ_PG7         94
+#define IRQ_PG8         95
+#define IRQ_PG9         96
+#define IRQ_PG10        97
+#define IRQ_PG11        98
+#define IRQ_PG12        99
+#define IRQ_PG13        100
+#define IRQ_PG14        101
+#define IRQ_PG15        102
+
+#define IRQ_PH0         103
+#define IRQ_PH1         104
+#define IRQ_PH2         105
+#define IRQ_PH3         106
+#define IRQ_PH4         107
+#define IRQ_PH5         108
+#define IRQ_PH6         109
+#define IRQ_PH7         110
+#define IRQ_PH8         111
+#define IRQ_PH9         112
+#define IRQ_PH10        113
+#define IRQ_PH11        114
+#define IRQ_PH12        115
+#define IRQ_PH13        116
+#define IRQ_PH14        117
+#define IRQ_PH15        118
+
+#define GPIO_IRQ_BASE	IRQ_PF0
+
+#define NR_IRQS     (IRQ_PH15+1)
+
+#define IVG7            7
+#define IVG8            8
+#define IVG9            9
+#define IVG10           10
+#define IVG11           11
+#define IVG12           12
+#define IVG13           13
+#define IVG14           14
+#define IVG15           15
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMA0_ERROR_POS	4
+#define IRQ_DMAR0_BLK_POS 	8
+#define IRQ_DMAR1_BLK_POS 	12
+#define IRQ_DMAR0_OVR_POS 	16
+#define IRQ_DMAR1_OVR_POS 	20
+#define IRQ_PPI_ERROR_POS 	24
+#define IRQ_MAC_ERROR_POS 	28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_SPORT0_ERROR_POS	0
+#define IRQ_SPORT1_ERROR_POS	4
+#define IRQ_UART0_ERROR_POS 	16
+#define IRQ_UART1_ERROR_POS 	20
+#define IRQ_RTC_POS         	24
+#define IRQ_PPI_POS         	28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_SPORT0_RX_POS	0
+#define IRQ_SPORT0_TX_POS	4
+#define IRQ_SPORT1_RX_POS	8
+#define IRQ_SPORT1_TX_POS	12
+#define IRQ_TWI_POS      	16
+#define IRQ_SPI_POS      	20
+#define IRQ_UART0_RX_POS 	24
+#define IRQ_UART0_TX_POS 	28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_UART1_RX_POS  	0
+#define IRQ_UART1_TX_POS  	4
+#define IRQ_OPTSEC_POS    	8
+#define IRQ_CNT_POS       	12
+#define IRQ_MAC_RX_POS    	16
+#define IRQ_PORTH_INTA_POS	20
+#define IRQ_MAC_TX_POS    	24
+#define IRQ_PORTH_INTB_POS	28
+
+/* IAR4 BIT FIELDS */
+#define IRQ_TMR0_POS		0
+#define IRQ_TMR1_POS		4
+#define IRQ_TMR2_POS		8
+#define IRQ_TMR3_POS		12
+#define IRQ_TMR4_POS		16
+#define IRQ_TMR5_POS		20
+#define IRQ_TMR6_POS		24
+#define IRQ_TMR7_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_PORTG_INTA_POS	0
+#define IRQ_PORTG_INTB_POS	4
+#define IRQ_MEM_DMA0_POS  	8
+#define IRQ_MEM_DMA1_POS  	12
+#define IRQ_WATCH_POS     	16
+#define IRQ_PORTF_INTA_POS	20
+#define IRQ_PORTF_INTB_POS	24
+#define IRQ_SPI_ERROR_POS 	28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_NFC_ERROR_POS  	0
+#define IRQ_HDMA_ERROR_POS 	4
+#define IRQ_HDMA_POS       	8
+#define IRQ_USB_EINT_POS   	12
+#define IRQ_USB_INT0_POS   	16
+#define IRQ_USB_INT1_POS   	20
+#define IRQ_USB_INT2_POS   	24
+#define IRQ_USB_DMA_POS    	28
+
+#endif				/* _BF527_IRQ_H_ */
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h
new file mode 100644
index 00000000000..cbe03f4a569
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/mem_init.h
@@ -0,0 +1,310 @@
+/*
+ * File:         include/asm-blackfin/mach-bf527/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC16M8A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M8A2_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+  /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
new file mode 100644
index 00000000000..ef46dc991cd
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -0,0 +1,102 @@
+/*
+ * file:         include/asm-blackfin/mach-bf527/mem_map.h
+ * based on:	include/asm-blackfin/mach-bf537/mem_map.h
+ * author:	Michael Hennerich (michael.hennerich@analog.com)
+ *
+ * created:
+ * description:
+ *	Memory MAP Common header file for blackfin BF527/5/2 of processors.
+ * rev:
+ *
+ * modified:
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MEM_MAP_527_H_
+#define _MEM_MAP_527_H_
+
+#define COREMMR_BASE           0xFFE00000	/* Core MMRs */
+#define SYSMMR_BASE            0xFFC00000	/* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	/* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	/* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	/* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	/* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x8000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF527 ADSP-BF525 ADSP-BF522 processors */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif				/*CONFIG_BFIN_DCACHE */
+
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START	0xFFB00000
+#define L1_SCRATCH_LENGTH	0x1000
+
+#endif				/* _MEM_MAP_527_H_ */
diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
new file mode 100644
index 00000000000..ae4d205bfcf
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
@@ -0,0 +1,207 @@
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+
+#if defined(CONFIG_BF527_SPORT0_PORTF)
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#elif defined(CONFIG_BF527_SPORT0_PORTG)
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#if defined(CONFIG_BF527_SPORT0_TSCLK_PG10)
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#elif defined(CONFIG_BF527_SPORT0_TSCLK_PG14)
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#endif
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#endif
+
+#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2))
+
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2))
+
+#if defined(CONFIG_BF527_UART1_PORTF)
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2))
+#elif defined(CONFIG_BF527_UART1_PORTG)
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#endif
+
+#define P_HWAIT		(P_DONTCARE)
+
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+/* #define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) */
+#define P_DMAR1		(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_DMAR0		(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_MDC		(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_RMII0_MDINT	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+#define P_MII0_PHYINT	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2))
+
+#define P_HOST_WR	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
+#define P_HOST_ACK	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
+#define P_HOST_ADDR	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
+#define P_HOST_RD	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2))
+#define P_HOST_CE	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
+
+#if defined(CONFIG_BF527_NAND_D_PORTF)
+#define P_NAND_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2))
+#define P_NAND_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2))
+#define P_NAND_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2))
+#define P_NAND_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2))
+#define P_NAND_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2))
+#define P_NAND_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2))
+#define P_NAND_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2))
+#define P_NAND_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2))
+#elif defined(CONFIG_BF527_NAND_D_PORTH)
+#define P_NAND_D0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_NAND_D1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_NAND_D2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_NAND_D3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_NAND_D4	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_NAND_D5	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_NAND_D6	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_NAND_D7	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#endif
+
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_NAND_CE	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_NAND_WE	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_NAND_RE	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_NAND_RB	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_NAND_CLE	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
+#define P_NAND_ALE	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
+
+#define P_HOST_D0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2))
+#define P_HOST_D1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2))
+#define P_HOST_D2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_HOST_D3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_HOST_D4	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+#define P_HOST_D5	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(2))
+#define P_HOST_D6	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2))
+#define P_HOST_D7	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2))
+#define P_HOST_D8	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2))
+#define P_HOST_D9	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(2))
+#define P_HOST_D10	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(2))
+#define P_HOST_D11	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(2))
+#define P_HOST_D12	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(2))
+#define P_HOST_D13	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(2))
+#define P_HOST_D14	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(2))
+#define P_HOST_D15	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(2))
+
+#define P_MII0_ETxD0	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_MII0_ETxD1	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1))
+#define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(1))
+#define P_MII0_ETxD3	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(1))
+#define P_MII0_ETxEN	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+#define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_MII0_COL	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
+#define P_MII0_ERxD0	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_MII0_ERxD1	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(1))
+#define P_MII0_ERxD2	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(1))
+#define P_MII0_ERxD3	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(1))
+#define P_MII0_ERxDV	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(1))
+#define P_MII0_ERxCLK	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(1))
+#define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_RMII0_REF_CLK	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_RMII0_CRS_DV	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_MDIO		(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+
+#define P_TWI0_SCL	(P_DONTCARE)
+#define P_TWI0_SDA	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_TMR0		(P_DONTCARE)
+#define P_TMRCLK	(P_DONTCARE)
+#define P_PPI0_CLK	(P_DONTCARE)
+
+#define P_MII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxD2, \
+	P_MII0_ETxD3, \
+	P_MII0_ETxEN, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_COL, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxD2, \
+	P_MII0_ERxD3, \
+	P_MII0_ERxDV, \
+	P_MII0_ERxCLK, \
+	P_MII0_ERxER, \
+	P_MII0_CRS, \
+	P_MDC, \
+	P_MDIO, 0}
+
+#define P_RMII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxEN, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxER, \
+	P_RMII0_REF_CLK, \
+	P_RMII0_MDINT, \
+	P_RMII0_CRS_DV, \
+	P_MDC, \
+	P_MDIO, 0}
+
+#endif				/* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c
index 1fa38979396..8a2367403d2 100644
--- a/arch/blackfin/mach-bf527/ints-priority.c
+++ b/arch/blackfin/mach-bf527/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 7cc4864f6aa..c66a68f3023 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 
 #include <asm/dma.h>
@@ -65,10 +64,15 @@ static struct platform_device rtc_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x20300000,
-		.end	= 0x20300000 + 8,
+		.end	= 0x20300000 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x20300000 + 4,
+		.end	= 0x20300000 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF10,
 		.end	= IRQ_PF10,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
@@ -136,16 +140,16 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00060000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0x100000,
 		.offset = 0x60000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x6a0000,
 		.offset = 0x00160000,
 	}
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 840059241fb..308c98dc5ab 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -14,6 +14,12 @@ config BFIN533_STAMP
 	help
 	  BF533-STAMP board support.
 
+config BLACKSTAMP
+	bool "BlackStamp"
+	help
+	  Support for the BlackStamp board.  Hardware info available at
+	  http://blackfin.uclinux.org/gf/project/blackstamp/
+
 config BFIN533_BLUETECHNIX_CM
 	bool "Bluetechnix CM-BF533"
 	depends on (BF533)
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index b7a1a1d79bd..9afbe72b484 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o
+obj-$(CONFIG_BLACKSTAMP)               += blackstamp.o
 obj-$(CONFIG_H8606_HVSISTEMAS)         += H8606.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
new file mode 100644
index 00000000000..d064ded8771
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -0,0 +1,401 @@
+/*
+ * File:         arch/blackfin/mach-bf533/blackstamp.c
+ * Based on:     arch/blackfin/mach-bf533/stamp.c
+ * Author:       Benjamin Matthews <bmat@lle.rochester.edu>
+ *               Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2008
+ * Description:  Board Info File for the BlackStamp
+ *
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * More info about the BlackStamp at:
+ * 	http://blackfin.uclinux.org/gf/project/blackstamp/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BlackStamp";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF3,
+		.end = IRQ_PF3,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"},
+}; /* Mapped to the first three PF Test Points */
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= 8,
+	.scl_pin		= 9,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 40,
+}; /* This hasn't actually been used these pins
+    * are (currently) free pins on the expansion connector */
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+	&i2c_gpio_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init blackstamp_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	if (ret < 0)
+		return ret;
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+	bfin_write_FIO_FLAG_S(PF0);
+	SSYNC();
+#endif
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(blackstamp_init);
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index ed2b0b8f5dc..575843f6d9e 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -36,7 +36,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -53,16 +52,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF533";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	38
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 2,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x2030C000,
-		.end = 0x2030C01F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2030D018,
-		.end = 0x2030D01B,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init cm_bf533_init(void)
@@ -416,10 +374,6 @@ static int __init cm_bf533_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 079389cbd85..cc2e7eeb1d5 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -37,7 +37,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -90,16 +89,16 @@ static struct platform_device smc91x_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -424,10 +382,6 @@ static int __init ezkit_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 13ae49515f7..050ffca5353 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <asm/dma.h>
@@ -114,15 +113,15 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
-		.name   = "Bootloader",
+		.name   = "bootloader(nor)",
 		.size   = 0x40000,
 		.offset = 0,
 	}, {
-		.name   = "Kernel",
+		.name   = "linux kernel(nor)",
 		.size   = 0xE0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name   = "RootFS",
+		.name   = "file system(nor)",
 		.size   = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -164,16 +163,16 @@ static struct platform_device stamp_flash_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -625,10 +583,6 @@ static int __init stamp_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 1295deac00a..01b2b7ead5a 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -30,296 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	p0.h = hi(FIO_MASKA_C);
-	p0.l = lo(FIO_MASKA_C);
-	r0 = 0xFFFF(Z);
-	w[p0] = r0.L;	/* Disable all interrupts */
-	ssync;
-
-	p0.h = hi(FIO_MASKB_C);
-	p0.l = lo(FIO_MASKB_C);
-	r0 = 0xFFFF(Z);
-	w[p0] = r0.L;	/* Disable all interrupts */
-	ssync;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 	p0.h = hi(SIC_IWR);
 	p0.l = lo(SIC_IWR);
@@ -390,12 +107,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
@@ -418,13 +129,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR);
-	p0.l = lo(SIC_IWR);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
new file mode 100644
index 00000000000..8f7ea112fd3
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -0,0 +1,272 @@
+/*
+ * File: include/asm-blackfin/mach-bf533/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ *  - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 or 0.2 silicon - sorry */
+#if __SILICON_REVISION__ < 3
+# error will not work on BF533 silicon version 0.0, 0.1, or 0.2
+#endif
+
+#if defined(__ADSPBF531__)
+# define ANOMALY_BF531 1
+#else
+# define ANOMALY_BF531 0
+#endif
+#if defined(__ADSPBF532__)
+# define ANOMALY_BF532 1
+#else
+# define ANOMALY_BF532 0
+#endif
+#if defined(__ADSPBF533__)
+# define ANOMALY_BF533 1
+#else
+# define ANOMALY_BF533 0
+#endif
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
+#define ANOMALY_05000105 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
+#define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning Serial Ports on with External Frame Syncs */
+#define ANOMALY_05000167 (1)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
+/* False Protection Exceptions */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
+/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
+#define ANOMALY_05000201 (__SILICON_REVISION__ < 4)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Specific Sequence That Can Cause DMA Error or DMA Stopping */
+#define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
+/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 4)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (1)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* SPI Slave Boot Mode Modifies Registers from Reset Value */
+#define ANOMALY_05000229 (1)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 4)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 4)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Data CPLBs Should Prevent Spurious Hardware Errors */
+#define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 4)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 5)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
+/* Spontaneous Reset of Internal Voltage Regulator */
+#define ANOMALY_05000271 (__SILICON_REVISION__ < 4)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM Memory May Be Lost */
+#define ANOMALY_05000273 (1)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (1)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (1)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (1)
+/* False Hardware Error Exception When ISR Context Is Not Restored */
+#define ANOMALY_05000281 (1)
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
+#define ANOMALY_05000282 (1)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (1)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
+#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
+#define ANOMALY_05000311 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
+#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
+
+/* These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
+
+/* Watchpoints (Hardware Breakpoints) are not supported */
+#define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* Reserved bits in SYSCFG register not set at power on */
+#define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
+#define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
+/* Erroneous exception when enabling cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* SPI clock polarity and phase bits incorrect during booting */
+#define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL is not set on Reset */
+#define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
+/* SPI boot will not complete if there is a zero fill block in the loader file */
+#define ANOMALY_05000138 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000143 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* The source MDMA descriptor may stop with a DMA Error */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
+#define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
+#define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
+/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* SPORT transmit data is not gated by external frame sync in certain conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
+/* DATA CPLB page miss can result in lost write-through cache data writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
+/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
+/* Disabling the PPI resets the PPI configuration registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
+/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* In PPI Transmit Modes with External Frame Syncs POLC */
+#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
+/* Internal Voltage Regulator may not start up */
+#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000323 (0)
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
new file mode 100644
index 00000000000..12a41693199
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bf533.h
@@ -0,0 +1,161 @@
+/*
+ * File:         include/asm-blackfin/mach-bf533/bf533.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __MACH_BF533_H__
+#define __MACH_BF533_H__
+
+#define SUPPORTED_REVID 2
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR		0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/* IAR0 BIT FIELDS*/
+#define RTC_ERROR_BIT			0x0FFFFFFF
+#define UART_ERROR_BIT			0xF0FFFFFF
+#define SPORT1_ERROR_BIT		0xFF0FFFFF
+#define SPI_ERROR_BIT			0xFFF0FFFF
+#define SPORT0_ERROR_BIT		0xFFFF0FFF
+#define PPI_ERROR_BIT			0xFFFFF0FF
+#define DMA_ERROR_BIT			0xFFFFFF0F
+#define PLLWAKE_ERROR_BIT		0xFFFFFFFF
+
+/* IAR1 BIT FIELDS*/
+#define DMA7_UARTTX_BIT			0x0FFFFFFF
+#define DMA6_UARTRX_BIT			0xF0FFFFFF
+#define DMA5_SPI_BIT			0xFF0FFFFF
+#define DMA4_SPORT1TX_BIT		0xFFF0FFFF
+#define DMA3_SPORT1RX_BIT		0xFFFF0FFF
+#define DMA2_SPORT0TX_BIT		0xFFFFF0FF
+#define DMA1_SPORT0RX_BIT		0xFFFFFF0F
+#define DMA0_PPI_BIT			0xFFFFFFFF
+
+/* IAR2 BIT FIELDS*/
+#define WDTIMER_BIT			0x0FFFFFFF
+#define MEMDMA1_BIT			0xF0FFFFFF
+#define MEMDMA0_BIT			0xFF0FFFFF
+#define PFB_BIT				0xFFF0FFFF
+#define PFA_BIT				0xFFFF0FFF
+#define TIMER2_BIT			0xFFFFF0FF
+#define TIMER1_BIT			0xFFFFFF0F
+#define TIMER0_BIT		        0xFFFFFFFF
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#ifdef CONFIG_BF533
+#define CPU "BF533"
+#define CPUID 0x027a5000
+#endif
+#ifdef CONFIG_BF532
+#define CPU "BF532"
+#define CPUID 0x0275A000
+#endif
+#ifdef CONFIG_BF531
+#define CPU "BF531"
+#define CPUID 0x027a5000
+#endif
+#ifndef CPU
+#define	CPU "UNKNOWN"
+#define CPUID 0x0
+#endif
+
+#endif				/* __MACH_BF533_H__  */
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
new file mode 100644
index 00000000000..ebf592b59aa
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -0,0 +1,164 @@
+/*
+ * file:        include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	blackfin serial driver head file
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
+#define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
+#define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
+#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
+#define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+
+#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+# define CONFIG_SERIAL_BFIN_CTSRTS
+# ifndef CONFIG_UART0_CTS_PIN
+#  define CONFIG_UART0_CTS_PIN -1
+# endif
+# ifndef CONFIG_UART0_RTS_PIN
+#  define CONFIG_UART0_RTS_PIN -1
+# endif
+#endif
+
+struct bfin_serial_port {
+        struct uart_port        port;
+        unsigned int            old_status;
+	unsigned int lsr;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	int			tx_done;
+	int			tx_count;
+	struct circ_buf		rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int			rx_dma_nrows;
+	unsigned int		tx_dma_channel;
+	unsigned int		rx_dma_channel;
+	struct work_struct	tx_dma_workqueue;
+#else
+# if ANOMALY_05000230
+	unsigned int anomaly_threshold;
+# endif
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	struct timer_list       cts_timer;
+	int			cts_pin;
+	int			rts_pin;
+#endif
+};
+
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+	uart->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+	uart->lsr = 0;
+	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
+struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+struct bfin_serial_res {
+	unsigned long	uart_base_addr;
+	int		uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	unsigned int	uart_tx_dma_channel;
+	unsigned int	uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	int		uart_cts_pin;
+	int		uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+	{
+	0xFFC00400,
+	IRQ_UART_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART_TX,
+	CH_UART_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	CONFIG_UART0_CTS_PIN,
+	CONFIG_UART0_RTS_PIN,
+#endif
+	}
+};
+
+#define DRIVER_NAME "bfin-uart"
+
+int nr_ports = BFIN_UART_NR_PORTS;
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	if (uart->cts_pin >= 0) {
+		gpio_request(uart->cts_pin, DRIVER_NAME);
+		gpio_direction_input(uart->cts_pin);
+	}
+	if (uart->rts_pin >= 0) {
+		gpio_request(uart->rts_pin, DRIVER_NAME);
+		gpio_direction_input(uart->rts_pin, 0);
+	}
+#endif
+}
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_sir.h b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h
new file mode 100644
index 00000000000..9bb87e9e2e9
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h
@@ -0,0 +1,125 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART_RX,
+	CH_UART_RX,
+	CH_UART_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
new file mode 100644
index 00000000000..d80971b4e3a
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -0,0 +1,60 @@
+/*
+ * File:         include/asm-blackfin/mach-bf533/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF533_FAMILY
+
+#include "bf533.h"
+#include "mem_map.h"
+#include "defBF532.h"
+#include "anomaly.h"
+
+#if !defined(__ASSEMBLY__)
+#include "cdefBF532.h"
+#endif
+
+#define BFIN_UART_NR_PORTS      1
+
+#define OFFSET_THR              0x00	/* Transmit Holding register            */
+#define OFFSET_RBR              0x00	/* Receive Buffer register              */
+#define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
+#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
+#define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
+#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
+#define OFFSET_LCR              0x0C	/* Line Control Register                */
+#define OFFSET_MCR              0x10	/* Modem Control Register               */
+#define OFFSET_LSR              0x14	/* Line Status Register                 */
+#define OFFSET_MSR              0x18	/* Modem Status Register                */
+#define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
+#define OFFSET_GCTL             0x24	/* Global Control Register              */
+
+#endif				/* _MACH_BLACKFIN_H_ */
diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
new file mode 100644
index 00000000000..3d8978a52c1
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -0,0 +1,767 @@
+/*
+ * File:         include/asm-blackfin/mach-bf533/cdefBF532.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF532_H
+#define _CDEF_BF532_H
+
+#include <asm/blackfin.h>
+
+/*include all Core registers and bit definitions*/
+#include "defBF532.h"
+
+/*include core specific register pointer definitions*/
+#include <asm/cdef_LPBlackfin.h>
+
+#include <asm/system.h>
+
+/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */
+#define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)             bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT()              bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)          bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID()                   bfin_read32(CHIPID)
+#define bfin_read_PLL_DIV()                  bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)              bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL()                   bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	local_irq_restore(flags);
+}
+
+/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */
+#define bfin_read_SWRST()                    bfin_read16(SWRST)
+#define bfin_write_SWRST(val)                bfin_write16(SWRST,val)
+#define bfin_read_SYSCR()                    bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)                bfin_write16(SYSCR,val)
+#define bfin_read_SIC_IAR0()                 bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)             bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1()                 bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)             bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2()                 bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)             bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3()                 bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)             bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_IMASK()                bfin_read32(SIC_IMASK)
+#define bfin_write_SIC_IMASK(val)            bfin_write32(SIC_IMASK,val)
+#define bfin_read_SIC_ISR()                  bfin_read32(SIC_ISR)
+#define bfin_write_SIC_ISR(val)              bfin_write32(SIC_ISR,val)
+#define bfin_read_SIC_IWR()                  bfin_read32(SIC_IWR)
+#define bfin_write_SIC_IWR(val)              bfin_write32(SIC_IWR,val)
+
+/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */
+#define bfin_read_WDOG_CTL()                 bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)             bfin_write16(WDOG_CTL,val)
+#define bfin_read_WDOG_CNT()                 bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)             bfin_write32(WDOG_CNT,val)
+#define bfin_read_WDOG_STAT()                bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)            bfin_write32(WDOG_STAT,val)
+
+/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */
+#define bfin_read_RTC_STAT()                 bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)             bfin_write32(RTC_STAT,val)
+#define bfin_read_RTC_ICTL()                 bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)             bfin_write16(RTC_ICTL,val)
+#define bfin_read_RTC_ISTAT()                bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)            bfin_write16(RTC_ISTAT,val)
+#define bfin_read_RTC_SWCNT()                bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)            bfin_write16(RTC_SWCNT,val)
+#define bfin_read_RTC_ALARM()                bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)            bfin_write32(RTC_ALARM,val)
+#define bfin_read_RTC_FAST()                 bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val)             bfin_write16(RTC_FAST,val)
+#define bfin_read_RTC_PREN()                 bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)             bfin_write16(RTC_PREN,val)
+
+/* DMA Traffic controls */
+#define bfin_read_DMA_TCPER()                bfin_read16(DMA_TCPER)
+#define bfin_write_DMA_TCPER(val)            bfin_write16(DMA_TCPER,val)
+#define bfin_read_DMA_TCCNT()                bfin_read16(DMA_TCCNT)
+#define bfin_write_DMA_TCCNT(val)            bfin_write16(DMA_TCCNT,val)
+
+/* Alternate deprecated register names (below) provided for backwards code compatibility */
+#define bfin_read_DMA_TC_PER()               bfin_read16(DMA_TC_PER)
+#define bfin_write_DMA_TC_PER(val)           bfin_write16(DMA_TC_PER,val)
+#define bfin_read_DMA_TC_CNT()               bfin_read16(DMA_TC_CNT)
+#define bfin_write_DMA_TC_CNT(val)           bfin_write16(DMA_TC_CNT,val)
+
+/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
+#define bfin_read_FIO_DIR()                  bfin_read16(FIO_DIR)
+#define bfin_write_FIO_DIR(val)              bfin_write16(FIO_DIR,val)
+#define bfin_read_FIO_MASKA_C()              bfin_read16(FIO_MASKA_C)
+#define bfin_write_FIO_MASKA_C(val)          bfin_write16(FIO_MASKA_C,val)
+#define bfin_read_FIO_MASKA_S()              bfin_read16(FIO_MASKA_S)
+#define bfin_write_FIO_MASKA_S(val)          bfin_write16(FIO_MASKA_S,val)
+#define bfin_read_FIO_MASKB_C()              bfin_read16(FIO_MASKB_C)
+#define bfin_write_FIO_MASKB_C(val)          bfin_write16(FIO_MASKB_C,val)
+#define bfin_read_FIO_MASKB_S()              bfin_read16(FIO_MASKB_S)
+#define bfin_write_FIO_MASKB_S(val)          bfin_write16(FIO_MASKB_S,val)
+#define bfin_read_FIO_POLAR()                bfin_read16(FIO_POLAR)
+#define bfin_write_FIO_POLAR(val)            bfin_write16(FIO_POLAR,val)
+#define bfin_read_FIO_EDGE()                 bfin_read16(FIO_EDGE)
+#define bfin_write_FIO_EDGE(val)             bfin_write16(FIO_EDGE,val)
+#define bfin_read_FIO_BOTH()                 bfin_read16(FIO_BOTH)
+#define bfin_write_FIO_BOTH(val)             bfin_write16(FIO_BOTH,val)
+#define bfin_read_FIO_INEN()                 bfin_read16(FIO_INEN)
+#define bfin_write_FIO_INEN(val)             bfin_write16(FIO_INEN,val)
+#define bfin_read_FIO_MASKA_D()              bfin_read16(FIO_MASKA_D)
+#define bfin_write_FIO_MASKA_D(val)          bfin_write16(FIO_MASKA_D,val)
+#define bfin_read_FIO_MASKA_T()              bfin_read16(FIO_MASKA_T)
+#define bfin_write_FIO_MASKA_T(val)          bfin_write16(FIO_MASKA_T,val)
+#define bfin_read_FIO_MASKB_D()              bfin_read16(FIO_MASKB_D)
+#define bfin_write_FIO_MASKB_D(val)          bfin_write16(FIO_MASKB_D,val)
+#define bfin_read_FIO_MASKB_T()              bfin_read16(FIO_MASKB_T)
+#define bfin_write_FIO_MASKB_T(val)          bfin_write16(FIO_MASKB_T,val)
+
+
+#if ANOMALY_05000311
+#define BFIN_WRITE_FIO_FLAG(name) \
+static __inline__ void bfin_write_FIO_FLAG_ ## name (unsigned short val)\
+{\
+	unsigned long flags;\
+	local_irq_save(flags);\
+	bfin_write16(FIO_FLAG_ ## name,val);\
+	bfin_read_CHIPID();\
+	local_irq_restore(flags);\
+}
+BFIN_WRITE_FIO_FLAG(D)
+BFIN_WRITE_FIO_FLAG(C)
+BFIN_WRITE_FIO_FLAG(S)
+BFIN_WRITE_FIO_FLAG(T)
+
+#define BFIN_READ_FIO_FLAG(name) \
+static __inline__ unsigned short bfin_read_FIO_FLAG_ ## name (void)\
+{\
+	unsigned long flags;\
+	unsigned short ret;\
+	local_irq_save(flags);\
+	ret = bfin_read16(FIO_FLAG_ ## name);\
+	bfin_read_CHIPID();\
+	local_irq_restore(flags);\
+	return ret;\
+}
+BFIN_READ_FIO_FLAG(D)
+BFIN_READ_FIO_FLAG(C)
+BFIN_READ_FIO_FLAG(S)
+BFIN_READ_FIO_FLAG(T)
+
+#else
+#define bfin_write_FIO_FLAG_D(val)           bfin_write16(FIO_FLAG_D,val)
+#define bfin_write_FIO_FLAG_C(val)           bfin_write16(FIO_FLAG_C,val)
+#define bfin_write_FIO_FLAG_S(val)           bfin_write16(FIO_FLAG_S,val)
+#define bfin_write_FIO_FLAG_T(val)           bfin_write16(FIO_FLAG_T,val)
+#define bfin_read_FIO_FLAG_T()               bfin_read16(FIO_FLAG_T)
+#define bfin_read_FIO_FLAG_C()               bfin_read16(FIO_FLAG_C)
+#define bfin_read_FIO_FLAG_S()               bfin_read16(FIO_FLAG_S)
+#define bfin_read_FIO_FLAG_D()               bfin_read16(FIO_FLAG_D)
+#endif
+
+
+/* DMA Controller */
+#define bfin_read_DMA0_CONFIG()              bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)          bfin_write16(DMA0_CONFIG,val)
+#define bfin_read_DMA0_NEXT_DESC_PTR()       bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val)   bfin_write32(DMA0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA0_START_ADDR()          bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val)      bfin_write32(DMA0_START_ADDR,val)
+#define bfin_read_DMA0_X_COUNT()             bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)         bfin_write16(DMA0_X_COUNT,val)
+#define bfin_read_DMA0_Y_COUNT()             bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)         bfin_write16(DMA0_Y_COUNT,val)
+#define bfin_read_DMA0_X_MODIFY()            bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)        bfin_write16(DMA0_X_MODIFY,val)
+#define bfin_read_DMA0_Y_MODIFY()            bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)        bfin_write16(DMA0_Y_MODIFY,val)
+#define bfin_read_DMA0_CURR_DESC_PTR()       bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val)   bfin_write32(DMA0_CURR_DESC_PTR,val)
+#define bfin_read_DMA0_CURR_ADDR()           bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val)       bfin_write32(DMA0_CURR_ADDR,val)
+#define bfin_read_DMA0_CURR_X_COUNT()        bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)    bfin_write16(DMA0_CURR_X_COUNT,val)
+#define bfin_read_DMA0_CURR_Y_COUNT()        bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)    bfin_write16(DMA0_CURR_Y_COUNT,val)
+#define bfin_read_DMA0_IRQ_STATUS()          bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)      bfin_write16(DMA0_IRQ_STATUS,val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()      bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)  bfin_write16(DMA0_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA1_CONFIG()              bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)          bfin_write16(DMA1_CONFIG,val)
+#define bfin_read_DMA1_NEXT_DESC_PTR()       bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val)   bfin_write32(DMA1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_START_ADDR()          bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val)      bfin_write32(DMA1_START_ADDR,val)
+#define bfin_read_DMA1_X_COUNT()             bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)         bfin_write16(DMA1_X_COUNT,val)
+#define bfin_read_DMA1_Y_COUNT()             bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)         bfin_write16(DMA1_Y_COUNT,val)
+#define bfin_read_DMA1_X_MODIFY()            bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)        bfin_write16(DMA1_X_MODIFY,val)
+#define bfin_read_DMA1_Y_MODIFY()            bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)        bfin_write16(DMA1_Y_MODIFY,val)
+#define bfin_read_DMA1_CURR_DESC_PTR()       bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val)   bfin_write32(DMA1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_CURR_ADDR()           bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val)       bfin_write32(DMA1_CURR_ADDR,val)
+#define bfin_read_DMA1_CURR_X_COUNT()        bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)    bfin_write16(DMA1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_CURR_Y_COUNT()        bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)    bfin_write16(DMA1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_IRQ_STATUS()          bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)      bfin_write16(DMA1_IRQ_STATUS,val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()      bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)  bfin_write16(DMA1_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA2_CONFIG()              bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)          bfin_write16(DMA2_CONFIG,val)
+#define bfin_read_DMA2_NEXT_DESC_PTR()       bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val)   bfin_write32(DMA2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_START_ADDR()          bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val)      bfin_write32(DMA2_START_ADDR,val)
+#define bfin_read_DMA2_X_COUNT()             bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)         bfin_write16(DMA2_X_COUNT,val)
+#define bfin_read_DMA2_Y_COUNT()             bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)         bfin_write16(DMA2_Y_COUNT,val)
+#define bfin_read_DMA2_X_MODIFY()            bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)        bfin_write16(DMA2_X_MODIFY,val)
+#define bfin_read_DMA2_Y_MODIFY()            bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)        bfin_write16(DMA2_Y_MODIFY,val)
+#define bfin_read_DMA2_CURR_DESC_PTR()       bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val)   bfin_write32(DMA2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_CURR_ADDR()           bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val)       bfin_write32(DMA2_CURR_ADDR,val)
+#define bfin_read_DMA2_CURR_X_COUNT()        bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)    bfin_write16(DMA2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_CURR_Y_COUNT()        bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)    bfin_write16(DMA2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_IRQ_STATUS()          bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)      bfin_write16(DMA2_IRQ_STATUS,val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()      bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)  bfin_write16(DMA2_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA3_CONFIG()              bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)          bfin_write16(DMA3_CONFIG,val)
+#define bfin_read_DMA3_NEXT_DESC_PTR()       bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val)   bfin_write32(DMA3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA3_START_ADDR()          bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val)      bfin_write32(DMA3_START_ADDR,val)
+#define bfin_read_DMA3_X_COUNT()             bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)         bfin_write16(DMA3_X_COUNT,val)
+#define bfin_read_DMA3_Y_COUNT()             bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)         bfin_write16(DMA3_Y_COUNT,val)
+#define bfin_read_DMA3_X_MODIFY()            bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)        bfin_write16(DMA3_X_MODIFY,val)
+#define bfin_read_DMA3_Y_MODIFY()            bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)        bfin_write16(DMA3_Y_MODIFY,val)
+#define bfin_read_DMA3_CURR_DESC_PTR()       bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val)   bfin_write32(DMA3_CURR_DESC_PTR,val)
+#define bfin_read_DMA3_CURR_ADDR()           bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val)       bfin_write32(DMA3_CURR_ADDR,val)
+#define bfin_read_DMA3_CURR_X_COUNT()        bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)    bfin_write16(DMA3_CURR_X_COUNT,val)
+#define bfin_read_DMA3_CURR_Y_COUNT()        bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)    bfin_write16(DMA3_CURR_Y_COUNT,val)
+#define bfin_read_DMA3_IRQ_STATUS()          bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)      bfin_write16(DMA3_IRQ_STATUS,val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()      bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)  bfin_write16(DMA3_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA4_CONFIG()              bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)          bfin_write16(DMA4_CONFIG,val)
+#define bfin_read_DMA4_NEXT_DESC_PTR()       bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val)   bfin_write32(DMA4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA4_START_ADDR()          bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val)      bfin_write32(DMA4_START_ADDR,val)
+#define bfin_read_DMA4_X_COUNT()             bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)         bfin_write16(DMA4_X_COUNT,val)
+#define bfin_read_DMA4_Y_COUNT()             bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)         bfin_write16(DMA4_Y_COUNT,val)
+#define bfin_read_DMA4_X_MODIFY()            bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)        bfin_write16(DMA4_X_MODIFY,val)
+#define bfin_read_DMA4_Y_MODIFY()            bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)        bfin_write16(DMA4_Y_MODIFY,val)
+#define bfin_read_DMA4_CURR_DESC_PTR()       bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val)   bfin_write32(DMA4_CURR_DESC_PTR,val)
+#define bfin_read_DMA4_CURR_ADDR()           bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val)       bfin_write32(DMA4_CURR_ADDR,val)
+#define bfin_read_DMA4_CURR_X_COUNT()        bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)    bfin_write16(DMA4_CURR_X_COUNT,val)
+#define bfin_read_DMA4_CURR_Y_COUNT()        bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)    bfin_write16(DMA4_CURR_Y_COUNT,val)
+#define bfin_read_DMA4_IRQ_STATUS()          bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)      bfin_write16(DMA4_IRQ_STATUS,val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()      bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)  bfin_write16(DMA4_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA5_CONFIG()              bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)          bfin_write16(DMA5_CONFIG,val)
+#define bfin_read_DMA5_NEXT_DESC_PTR()       bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val)   bfin_write32(DMA5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA5_START_ADDR()          bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val)      bfin_write32(DMA5_START_ADDR,val)
+#define bfin_read_DMA5_X_COUNT()             bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)         bfin_write16(DMA5_X_COUNT,val)
+#define bfin_read_DMA5_Y_COUNT()             bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)         bfin_write16(DMA5_Y_COUNT,val)
+#define bfin_read_DMA5_X_MODIFY()            bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)        bfin_write16(DMA5_X_MODIFY,val)
+#define bfin_read_DMA5_Y_MODIFY()            bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)        bfin_write16(DMA5_Y_MODIFY,val)
+#define bfin_read_DMA5_CURR_DESC_PTR()       bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val)   bfin_write32(DMA5_CURR_DESC_PTR,val)
+#define bfin_read_DMA5_CURR_ADDR()           bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val)       bfin_write32(DMA5_CURR_ADDR,val)
+#define bfin_read_DMA5_CURR_X_COUNT()        bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)    bfin_write16(DMA5_CURR_X_COUNT,val)
+#define bfin_read_DMA5_CURR_Y_COUNT()        bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)    bfin_write16(DMA5_CURR_Y_COUNT,val)
+#define bfin_read_DMA5_IRQ_STATUS()          bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)      bfin_write16(DMA5_IRQ_STATUS,val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()      bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)  bfin_write16(DMA5_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA6_CONFIG()              bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)          bfin_write16(DMA6_CONFIG,val)
+#define bfin_read_DMA6_NEXT_DESC_PTR()       bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val)   bfin_write32(DMA6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA6_START_ADDR()          bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val)      bfin_write32(DMA6_START_ADDR,val)
+#define bfin_read_DMA6_X_COUNT()             bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)         bfin_write16(DMA6_X_COUNT,val)
+#define bfin_read_DMA6_Y_COUNT()             bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)         bfin_write16(DMA6_Y_COUNT,val)
+#define bfin_read_DMA6_X_MODIFY()            bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)        bfin_write16(DMA6_X_MODIFY,val)
+#define bfin_read_DMA6_Y_MODIFY()            bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)        bfin_write16(DMA6_Y_MODIFY,val)
+#define bfin_read_DMA6_CURR_DESC_PTR()       bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val)   bfin_write32(DMA6_CURR_DESC_PTR,val)
+#define bfin_read_DMA6_CURR_ADDR()           bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val)       bfin_write32(DMA6_CURR_ADDR,val)
+#define bfin_read_DMA6_CURR_X_COUNT()        bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)    bfin_write16(DMA6_CURR_X_COUNT,val)
+#define bfin_read_DMA6_CURR_Y_COUNT()        bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)    bfin_write16(DMA6_CURR_Y_COUNT,val)
+#define bfin_read_DMA6_IRQ_STATUS()          bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)      bfin_write16(DMA6_IRQ_STATUS,val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()      bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)  bfin_write16(DMA6_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA7_CONFIG()              bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)          bfin_write16(DMA7_CONFIG,val)
+#define bfin_read_DMA7_NEXT_DESC_PTR()       bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val)   bfin_write32(DMA7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA7_START_ADDR()          bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val)      bfin_write32(DMA7_START_ADDR,val)
+#define bfin_read_DMA7_X_COUNT()             bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)         bfin_write16(DMA7_X_COUNT,val)
+#define bfin_read_DMA7_Y_COUNT()             bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)         bfin_write16(DMA7_Y_COUNT,val)
+#define bfin_read_DMA7_X_MODIFY()            bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)        bfin_write16(DMA7_X_MODIFY,val)
+#define bfin_read_DMA7_Y_MODIFY()            bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)        bfin_write16(DMA7_Y_MODIFY,val)
+#define bfin_read_DMA7_CURR_DESC_PTR()       bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val)   bfin_write32(DMA7_CURR_DESC_PTR,val)
+#define bfin_read_DMA7_CURR_ADDR()           bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val)       bfin_write32(DMA7_CURR_ADDR,val)
+#define bfin_read_DMA7_CURR_X_COUNT()        bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)    bfin_write16(DMA7_CURR_X_COUNT,val)
+#define bfin_read_DMA7_CURR_Y_COUNT()        bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)    bfin_write16(DMA7_CURR_Y_COUNT,val)
+#define bfin_read_DMA7_IRQ_STATUS()          bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)      bfin_write16(DMA7_IRQ_STATUS,val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()      bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)  bfin_write16(DMA7_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D1_CONFIG()           bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)       bfin_write16(MDMA_D1_CONFIG,val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()    bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D1_START_ADDR()       bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)   bfin_write32(MDMA_D1_START_ADDR,val)
+#define bfin_read_MDMA_D1_X_COUNT()          bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)      bfin_write16(MDMA_D1_X_COUNT,val)
+#define bfin_read_MDMA_D1_Y_COUNT()          bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)      bfin_write16(MDMA_D1_Y_COUNT,val)
+#define bfin_read_MDMA_D1_X_MODIFY()         bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)     bfin_write16(MDMA_D1_X_MODIFY,val)
+#define bfin_read_MDMA_D1_Y_MODIFY()         bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)     bfin_write16(MDMA_D1_Y_MODIFY,val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()    bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D1_CURR_ADDR()        bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)    bfin_write32(MDMA_D1_CURR_ADDR,val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()     bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()     bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()       bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)   bfin_write16(MDMA_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()   bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S1_CONFIG()           bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)       bfin_write16(MDMA_S1_CONFIG,val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()    bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S1_START_ADDR()       bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)   bfin_write32(MDMA_S1_START_ADDR,val)
+#define bfin_read_MDMA_S1_X_COUNT()          bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)      bfin_write16(MDMA_S1_X_COUNT,val)
+#define bfin_read_MDMA_S1_Y_COUNT()          bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)      bfin_write16(MDMA_S1_Y_COUNT,val)
+#define bfin_read_MDMA_S1_X_MODIFY()         bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)     bfin_write16(MDMA_S1_X_MODIFY,val)
+#define bfin_read_MDMA_S1_Y_MODIFY()         bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)     bfin_write16(MDMA_S1_Y_MODIFY,val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()    bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S1_CURR_ADDR()        bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)    bfin_write32(MDMA_S1_CURR_ADDR,val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()     bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()     bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()       bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)   bfin_write16(MDMA_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()   bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D0_CONFIG()           bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)       bfin_write16(MDMA_D0_CONFIG,val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()    bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D0_START_ADDR()       bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)   bfin_write32(MDMA_D0_START_ADDR,val)
+#define bfin_read_MDMA_D0_X_COUNT()          bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)      bfin_write16(MDMA_D0_X_COUNT,val)
+#define bfin_read_MDMA_D0_Y_COUNT()          bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)      bfin_write16(MDMA_D0_Y_COUNT,val)
+#define bfin_read_MDMA_D0_X_MODIFY()         bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)     bfin_write16(MDMA_D0_X_MODIFY,val)
+#define bfin_read_MDMA_D0_Y_MODIFY()         bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)     bfin_write16(MDMA_D0_Y_MODIFY,val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()    bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D0_CURR_ADDR()        bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)    bfin_write32(MDMA_D0_CURR_ADDR,val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()     bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()     bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()       bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)   bfin_write16(MDMA_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()   bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S0_CONFIG()           bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)       bfin_write16(MDMA_S0_CONFIG,val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()    bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S0_START_ADDR()       bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)   bfin_write32(MDMA_S0_START_ADDR,val)
+#define bfin_read_MDMA_S0_X_COUNT()          bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)      bfin_write16(MDMA_S0_X_COUNT,val)
+#define bfin_read_MDMA_S0_Y_COUNT()          bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)      bfin_write16(MDMA_S0_Y_COUNT,val)
+#define bfin_read_MDMA_S0_X_MODIFY()         bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)     bfin_write16(MDMA_S0_X_MODIFY,val)
+#define bfin_read_MDMA_S0_Y_MODIFY()         bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)     bfin_write16(MDMA_S0_Y_MODIFY,val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()    bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S0_CURR_ADDR()        bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)    bfin_write32(MDMA_S0_CURR_ADDR,val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()     bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()     bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()       bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)   bfin_write16(MDMA_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()   bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
+
+/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */
+#define bfin_read_EBIU_AMGCTL()              bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)          bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0()             bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)         bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1()             bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)         bfin_write32(EBIU_AMBCTL1,val)
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */
+#define bfin_read_EBIU_SDGCTL()              bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)          bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDRRC()               bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)           bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT()              bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)          bfin_write16(EBIU_SDSTAT,val)
+#define bfin_read_EBIU_SDBCTL()              bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)          bfin_write16(EBIU_SDBCTL,val)
+
+/* UART Controller */
+#define bfin_read_UART_THR()                 bfin_read16(UART_THR)
+#define bfin_write_UART_THR(val)             bfin_write16(UART_THR,val)
+#define bfin_read_UART_RBR()                 bfin_read16(UART_RBR)
+#define bfin_write_UART_RBR(val)             bfin_write16(UART_RBR,val)
+#define bfin_read_UART_DLL()                 bfin_read16(UART_DLL)
+#define bfin_write_UART_DLL(val)             bfin_write16(UART_DLL,val)
+#define bfin_read_UART_IER()                 bfin_read16(UART_IER)
+#define bfin_write_UART_IER(val)             bfin_write16(UART_IER,val)
+#define bfin_read_UART_DLH()                 bfin_read16(UART_DLH)
+#define bfin_write_UART_DLH(val)             bfin_write16(UART_DLH,val)
+#define bfin_read_UART_IIR()                 bfin_read16(UART_IIR)
+#define bfin_write_UART_IIR(val)             bfin_write16(UART_IIR,val)
+#define bfin_read_UART_LCR()                 bfin_read16(UART_LCR)
+#define bfin_write_UART_LCR(val)             bfin_write16(UART_LCR,val)
+#define bfin_read_UART_MCR()                 bfin_read16(UART_MCR)
+#define bfin_write_UART_MCR(val)             bfin_write16(UART_MCR,val)
+#define bfin_read_UART_LSR()                 bfin_read16(UART_LSR)
+#define bfin_write_UART_LSR(val)             bfin_write16(UART_LSR,val)
+/*
+#define UART_MSR
+*/
+#define bfin_read_UART_SCR()                 bfin_read16(UART_SCR)
+#define bfin_write_UART_SCR(val)             bfin_write16(UART_SCR,val)
+#define bfin_read_UART_GCTL()                bfin_read16(UART_GCTL)
+#define bfin_write_UART_GCTL(val)            bfin_write16(UART_GCTL,val)
+
+/* SPI Controller */
+#define bfin_read_SPI_CTL()                  bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)              bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG()                  bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)              bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT()                 bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)             bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR()                 bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)             bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR()                 bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)             bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD()                 bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)             bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW()               bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)           bfin_write16(SPI_SHADOW,val)
+
+/* TIMER 0, 1, 2 Registers */
+#define bfin_read_TIMER0_CONFIG()            bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)        bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER()           bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)       bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD()            bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)        bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH()             bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)         bfin_write32(TIMER0_WIDTH,val)
+
+#define bfin_read_TIMER1_CONFIG()            bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)        bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER()           bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)       bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD()            bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)        bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH()             bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)         bfin_write32(TIMER1_WIDTH,val)
+
+#define bfin_read_TIMER2_CONFIG()            bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)        bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER()           bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)       bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD()            bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)        bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH()             bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)         bfin_write32(TIMER2_WIDTH,val)
+
+#define bfin_read_TIMER_ENABLE()             bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)         bfin_write16(TIMER_ENABLE,val)
+#define bfin_read_TIMER_DISABLE()            bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)        bfin_write16(TIMER_DISABLE,val)
+#define bfin_read_TIMER_STATUS()             bfin_read16(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)         bfin_write16(TIMER_STATUS,val)
+
+/* SPORT0 Controller */
+#define bfin_read_SPORT0_TCR1()              bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)          bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2()              bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)          bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV()           bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)       bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV()            bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)        bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX()                bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)            bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX()                bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)            bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32()              bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)          bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32()              bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)          bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16()              bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)          bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16()              bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)          bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1()              bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)          bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2()              bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)          bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV()           bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)       bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV()            bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)        bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT()              bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)          bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL()              bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)          bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1()             bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)         bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2()             bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)         bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0()             bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)         bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1()             bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)         bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2()             bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)         bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3()             bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)         bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0()             bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)         bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1()             bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)         bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2()             bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)         bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3()             bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)         bfin_write32(SPORT0_MRCS3,val)
+
+/* SPORT1 Controller */
+#define bfin_read_SPORT1_TCR1()              bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)          bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2()              bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)          bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV()           bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)       bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV()            bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)        bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX()                bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)            bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX()                bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)            bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32()              bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)          bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32()              bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)          bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16()              bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)          bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16()              bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)          bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1()              bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)          bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2()              bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)          bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV()           bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)       bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV()            bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)        bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT()              bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)          bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL()              bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)          bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1()             bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)         bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2()             bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)         bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0()             bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)         bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1()             bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)         bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2()             bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)         bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3()             bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)         bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0()             bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)         bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1()             bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)         bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2()             bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)         bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3()             bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)         bfin_write32(SPORT1_MRCS3,val)
+
+/* Parallel Peripheral Interface (PPI) */
+#define bfin_read_PPI_CONTROL()              bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)          bfin_write16(PPI_CONTROL,val)
+#define bfin_read_PPI_STATUS()               bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)           bfin_write16(PPI_STATUS,val)
+#define bfin_clear_PPI_STATUS()              bfin_read_PPI_STATUS()
+#define bfin_read_PPI_DELAY()                bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)            bfin_write16(PPI_DELAY,val)
+#define bfin_read_PPI_COUNT()                bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)            bfin_write16(PPI_COUNT,val)
+#define bfin_read_PPI_FRAME()                bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)            bfin_write16(PPI_FRAME,val)
+
+#endif				/* _CDEF_BF532_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
new file mode 100644
index 00000000000..7f4633223e6
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -0,0 +1,1266 @@
+/************************************************************************
+ *
+ * This file is subject to the terms and conditions of the GNU Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Non-GPL License also available as part of VisualDSP++
+ * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
+ *
+ * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
+ *
+ * This file under source code control, please send bugs or changes to:
+ * dsptools.support@analog.com
+ *
+ ************************************************************************/
+/*
+ * File:         include/asm-blackfin/mach-bf533/defBF532.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */
+
+#ifndef _DEF_BF532_H
+#define _DEF_BF532_H
+
+/* include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+
+#define PLL_CTL                0xFFC00000	/* PLL Control register (16-bit) */
+#define PLL_DIV			 0xFFC00004	/* PLL Divide Register (16-bit) */
+#define VR_CTL			 0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
+#define PLL_STAT               0xFFC0000C	/* PLL Status register (16-bit) */
+#define PLL_LOCKCNT            0xFFC00010	/* PLL Lock Count register (16-bit) */
+#define CHIPID                 0xFFC00014       /* Chip ID Register */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define SWRST			0xFFC00100  /* Software Reset Register (16-bit) */
+#define SYSCR			0xFFC00104  /* System Configuration registe */
+#define SIC_RVECT             		0xFFC00108	/* Interrupt Reset Vector Address Register */
+#define SIC_IMASK             		0xFFC0010C	/* Interrupt Mask Register */
+#define SIC_IAR0               		0xFFC00110	/* Interrupt Assignment Register 0 */
+#define SIC_IAR1               		0xFFC00114	/* Interrupt Assignment Register 1 */
+#define SIC_IAR2              		0xFFC00118	/* Interrupt Assignment Register 2 */
+#define SIC_ISR                		0xFFC00120	/* Interrupt Status Register */
+#define SIC_IWR                		0xFFC00124	/* Interrupt Wakeup Register */
+
+/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
+#define WDOG_CTL                	0xFFC00200	/* Watchdog Control Register */
+#define WDOG_CNT                	0xFFC00204	/* Watchdog Count Register */
+#define WDOG_STAT               	0xFFC00208	/* Watchdog Status Register */
+
+/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define RTC_STAT                	0xFFC00300	/* RTC Status Register */
+#define RTC_ICTL                	0xFFC00304	/* RTC Interrupt Control Register */
+#define RTC_ISTAT               	0xFFC00308	/* RTC Interrupt Status Register */
+#define RTC_SWCNT               	0xFFC0030C	/* RTC Stopwatch Count Register */
+#define RTC_ALARM               	0xFFC00310	/* RTC Alarm Time Register */
+#define RTC_FAST                	0xFFC00314	/* RTC Prescaler Enable Register */
+#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Register (alternate macro) */
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+
+/*
+ * Because include/linux/serial_reg.h have defined UART_*,
+ * So we define blackfin uart regs to BFIN_UART_*.
+ */
+#define BFIN_UART_THR			0xFFC00400	/* Transmit Holding register */
+#define BFIN_UART_RBR			0xFFC00400	/* Receive Buffer register */
+#define BFIN_UART_DLL			0xFFC00400	/* Divisor Latch (Low-Byte) */
+#define BFIN_UART_IER			0xFFC00404	/* Interrupt Enable Register */
+#define BFIN_UART_DLH			0xFFC00404	/* Divisor Latch (High-Byte) */
+#define BFIN_UART_IIR			0xFFC00408	/* Interrupt Identification Register */
+#define BFIN_UART_LCR			0xFFC0040C	/* Line Control Register */
+#define BFIN_UART_MCR			0xFFC00410	/* Modem Control Register */
+#define BFIN_UART_LSR			0xFFC00414	/* Line Status Register */
+#if 0
+#define BFIN_UART_MSR			0xFFC00418	/* Modem Status Register (UNUSED in ADSP-BF532) */
+#endif
+#define BFIN_UART_SCR			0xFFC0041C	/* SCR Scratch Register */
+#define BFIN_UART_GCTL			0xFFC00424	/* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE          		0xFFC00500
+#define SPI_CTL               		0xFFC00500	/* SPI Control Register */
+#define SPI_FLG               		0xFFC00504	/* SPI Flag register */
+#define SPI_STAT              		0xFFC00508	/* SPI Status register */
+#define SPI_TDBR              		0xFFC0050C	/* SPI Transmit Data Buffer Register */
+#define SPI_RDBR              		0xFFC00510	/* SPI Receive Data Buffer Register */
+#define SPI_BAUD              		0xFFC00514	/* SPI Baud rate Register */
+#define SPI_SHADOW            		0xFFC00518	/* SPI_RDBR Shadow Register */
+
+/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */
+
+#define TIMER0_CONFIG          		0xFFC00600	/* Timer 0 Configuration Register */
+#define TIMER0_COUNTER			0xFFC00604	/* Timer 0 Counter Register */
+#define TIMER0_PERIOD       		0xFFC00608	/* Timer 0 Period Register */
+#define TIMER0_WIDTH        		0xFFC0060C	/* Timer 0 Width Register */
+
+#define TIMER1_CONFIG          		0xFFC00610	/*  Timer 1 Configuration Register   */
+#define TIMER1_COUNTER         		0xFFC00614	/*  Timer 1 Counter Register         */
+#define TIMER1_PERIOD          		0xFFC00618	/*  Timer 1 Period Register          */
+#define TIMER1_WIDTH           		0xFFC0061C	/*  Timer 1 Width Register           */
+
+#define TIMER2_CONFIG          		0xFFC00620	/* Timer 2 Configuration Register   */
+#define TIMER2_COUNTER         		0xFFC00624	/* Timer 2 Counter Register         */
+#define TIMER2_PERIOD          		0xFFC00628	/* Timer 2 Period Register          */
+#define TIMER2_WIDTH           		0xFFC0062C	/* Timer 2 Width Register           */
+
+#define TIMER_ENABLE			0xFFC00640	/* Timer Enable Register */
+#define TIMER_DISABLE			0xFFC00644	/* Timer Disable Register */
+#define TIMER_STATUS			0xFFC00648	/* Timer Status Register */
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */
+
+#define FIO_FLAG_D	       		0xFFC00700	/* Flag Mask to directly specify state of pins */
+#define FIO_FLAG_C             		0xFFC00704	/* Peripheral Interrupt Flag Register (clear) */
+#define FIO_FLAG_S             		0xFFC00708	/* Peripheral Interrupt Flag Register (set) */
+#define FIO_FLAG_T			0xFFC0070C	/* Flag Mask to directly toggle state of pins */
+#define FIO_MASKA_D            		0xFFC00710	/* Flag Mask Interrupt A Register (set directly) */
+#define FIO_MASKA_C            		0xFFC00714	/* Flag Mask Interrupt A Register (clear) */
+#define FIO_MASKA_S            		0xFFC00718	/* Flag Mask Interrupt A Register (set) */
+#define FIO_MASKA_T            		0xFFC0071C	/* Flag Mask Interrupt A Register (toggle) */
+#define FIO_MASKB_D            		0xFFC00720	/* Flag Mask Interrupt B Register (set directly) */
+#define FIO_MASKB_C            		0xFFC00724	/* Flag Mask Interrupt B Register (clear) */
+#define FIO_MASKB_S            		0xFFC00728	/* Flag Mask Interrupt B Register (set) */
+#define FIO_MASKB_T            		0xFFC0072C	/* Flag Mask Interrupt B Register (toggle) */
+#define FIO_DIR                		0xFFC00730	/* Peripheral Flag Direction Register */
+#define FIO_POLAR              		0xFFC00734	/* Flag Source Polarity Register */
+#define FIO_EDGE               		0xFFC00738	/* Flag Source Sensitivity Register */
+#define FIO_BOTH               		0xFFC0073C	/* Flag Set on BOTH Edges Register */
+#define FIO_INEN					0xFFC00740	/* Flag Input Enable Register  */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1     	 	0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2      	 	0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV        		0xFFC00808	/* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV          		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX	             	0xFFC00810	/* SPORT0 TX Data Register */
+#define SPORT0_RX	            	0xFFC00818	/* SPORT0 RX Data Register */
+#define SPORT0_RCR1      	 	0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2      	 	0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV        		0xFFC00828	/* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV          		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT            		0xFFC00830	/* SPORT0 Status Register */
+#define SPORT0_CHNL            		0xFFC00834	/* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1           		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2           		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0           		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1           		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2           		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3           		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0           		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1           		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2           		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3           		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1     	 	0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2      	 	0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV        		0xFFC00908	/* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV          		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX	             	0xFFC00910	/* SPORT1 TX Data Register */
+#define SPORT1_RX	            	0xFFC00918	/* SPORT1 RX Data Register */
+#define SPORT1_RCR1      	 	0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2      	 	0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV        		0xFFC00928	/* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV          		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT            		0xFFC00930	/* SPORT1 Status Register */
+#define SPORT1_CHNL            		0xFFC00934	/* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1           		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2           		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0           		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1           		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2           		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3           		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0           		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1           		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2           		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3           		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* Asynchronous Memory Controller - External Bus Interface Unit  */
+#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0			0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1			0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+
+#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register */
+#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register */
+#define EBIU_SDRRC 			0xFFC00A18	/* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register */
+
+/* DMA Traffic controls */
+#define DMA_TC_PER 0xFFC00B0C	/* Traffic Control Periods Register */
+#define DMA_TC_CNT 0xFFC00B10	/* Traffic Control Current Counts Register */
+
+/* Alternate deprecated register names (below) provided for backwards code compatibility */
+#define DMA_TCPER 0xFFC00B0C	/* Traffic Control Periods Register */
+#define DMA_TCCNT 0xFFC00B10	/* Traffic Control Current Counts Register */
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
+#define DMA0_CONFIG		0xFFC00C08	/* DMA Channel 0 Configuration Register */
+#define DMA0_NEXT_DESC_PTR	0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register */
+#define DMA0_START_ADDR		0xFFC00C04	/* DMA Channel 0 Start Address Register */
+#define DMA0_X_COUNT		0xFFC00C10	/* DMA Channel 0 X Count Register */
+#define DMA0_Y_COUNT		0xFFC00C18	/* DMA Channel 0 Y Count Register */
+#define DMA0_X_MODIFY		0xFFC00C14	/* DMA Channel 0 X Modify Register */
+#define DMA0_Y_MODIFY		0xFFC00C1C	/* DMA Channel 0 Y Modify Register */
+#define DMA0_CURR_DESC_PTR	0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register */
+#define DMA0_CURR_ADDR		0xFFC00C24	/* DMA Channel 0 Current Address Register */
+#define DMA0_CURR_X_COUNT	0xFFC00C30	/* DMA Channel 0 Current X Count Register */
+#define DMA0_CURR_Y_COUNT	0xFFC00C38	/* DMA Channel 0 Current Y Count Register */
+#define DMA0_IRQ_STATUS		0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register */
+#define DMA0_PERIPHERAL_MAP	0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register */
+
+#define DMA1_CONFIG		0xFFC00C48	/* DMA Channel 1 Configuration Register */
+#define DMA1_NEXT_DESC_PTR	0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register */
+#define DMA1_START_ADDR		0xFFC00C44	/* DMA Channel 1 Start Address Register */
+#define DMA1_X_COUNT		0xFFC00C50	/* DMA Channel 1 X Count Register */
+#define DMA1_Y_COUNT		0xFFC00C58	/* DMA Channel 1 Y Count Register */
+#define DMA1_X_MODIFY		0xFFC00C54	/* DMA Channel 1 X Modify Register */
+#define DMA1_Y_MODIFY		0xFFC00C5C	/* DMA Channel 1 Y Modify Register */
+#define DMA1_CURR_DESC_PTR	0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register */
+#define DMA1_CURR_ADDR		0xFFC00C64	/* DMA Channel 1 Current Address Register */
+#define DMA1_CURR_X_COUNT	0xFFC00C70	/* DMA Channel 1 Current X Count Register */
+#define DMA1_CURR_Y_COUNT	0xFFC00C78	/* DMA Channel 1 Current Y Count Register */
+#define DMA1_IRQ_STATUS		0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register */
+#define DMA1_PERIPHERAL_MAP	0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register */
+
+#define DMA2_CONFIG		0xFFC00C88	/* DMA Channel 2 Configuration Register */
+#define DMA2_NEXT_DESC_PTR	0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register */
+#define DMA2_START_ADDR		0xFFC00C84	/* DMA Channel 2 Start Address Register */
+#define DMA2_X_COUNT		0xFFC00C90	/* DMA Channel 2 X Count Register */
+#define DMA2_Y_COUNT		0xFFC00C98	/* DMA Channel 2 Y Count Register */
+#define DMA2_X_MODIFY		0xFFC00C94	/* DMA Channel 2 X Modify Register */
+#define DMA2_Y_MODIFY		0xFFC00C9C	/* DMA Channel 2 Y Modify Register */
+#define DMA2_CURR_DESC_PTR	0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register */
+#define DMA2_CURR_ADDR		0xFFC00CA4	/* DMA Channel 2 Current Address Register */
+#define DMA2_CURR_X_COUNT	0xFFC00CB0	/* DMA Channel 2 Current X Count Register */
+#define DMA2_CURR_Y_COUNT	0xFFC00CB8	/* DMA Channel 2 Current Y Count Register */
+#define DMA2_IRQ_STATUS		0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register */
+#define DMA2_PERIPHERAL_MAP	0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register */
+
+#define DMA3_CONFIG		0xFFC00CC8	/* DMA Channel 3 Configuration Register */
+#define DMA3_NEXT_DESC_PTR	0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register */
+#define DMA3_START_ADDR		0xFFC00CC4	/* DMA Channel 3 Start Address Register */
+#define DMA3_X_COUNT		0xFFC00CD0	/* DMA Channel 3 X Count Register */
+#define DMA3_Y_COUNT		0xFFC00CD8	/* DMA Channel 3 Y Count Register */
+#define DMA3_X_MODIFY		0xFFC00CD4	/* DMA Channel 3 X Modify Register */
+#define DMA3_Y_MODIFY		0xFFC00CDC	/* DMA Channel 3 Y Modify Register */
+#define DMA3_CURR_DESC_PTR	0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register */
+#define DMA3_CURR_ADDR		0xFFC00CE4	/* DMA Channel 3 Current Address Register */
+#define DMA3_CURR_X_COUNT	0xFFC00CF0	/* DMA Channel 3 Current X Count Register */
+#define DMA3_CURR_Y_COUNT	0xFFC00CF8	/* DMA Channel 3 Current Y Count Register */
+#define DMA3_IRQ_STATUS		0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register */
+#define DMA3_PERIPHERAL_MAP	0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register */
+
+#define DMA4_CONFIG		0xFFC00D08	/* DMA Channel 4 Configuration Register */
+#define DMA4_NEXT_DESC_PTR	0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register */
+#define DMA4_START_ADDR		0xFFC00D04	/* DMA Channel 4 Start Address Register */
+#define DMA4_X_COUNT		0xFFC00D10	/* DMA Channel 4 X Count Register */
+#define DMA4_Y_COUNT		0xFFC00D18	/* DMA Channel 4 Y Count Register */
+#define DMA4_X_MODIFY		0xFFC00D14	/* DMA Channel 4 X Modify Register */
+#define DMA4_Y_MODIFY		0xFFC00D1C	/* DMA Channel 4 Y Modify Register */
+#define DMA4_CURR_DESC_PTR	0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register */
+#define DMA4_CURR_ADDR		0xFFC00D24	/* DMA Channel 4 Current Address Register */
+#define DMA4_CURR_X_COUNT	0xFFC00D30	/* DMA Channel 4 Current X Count Register */
+#define DMA4_CURR_Y_COUNT	0xFFC00D38	/* DMA Channel 4 Current Y Count Register */
+#define DMA4_IRQ_STATUS		0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register */
+#define DMA4_PERIPHERAL_MAP	0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register */
+
+#define DMA5_CONFIG		0xFFC00D48	/* DMA Channel 5 Configuration Register */
+#define DMA5_NEXT_DESC_PTR	0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register */
+#define DMA5_START_ADDR		0xFFC00D44	/* DMA Channel 5 Start Address Register */
+#define DMA5_X_COUNT		0xFFC00D50	/* DMA Channel 5 X Count Register */
+#define DMA5_Y_COUNT		0xFFC00D58	/* DMA Channel 5 Y Count Register */
+#define DMA5_X_MODIFY		0xFFC00D54	/* DMA Channel 5 X Modify Register */
+#define DMA5_Y_MODIFY		0xFFC00D5C	/* DMA Channel 5 Y Modify Register */
+#define DMA5_CURR_DESC_PTR	0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register */
+#define DMA5_CURR_ADDR		0xFFC00D64	/* DMA Channel 5 Current Address Register */
+#define DMA5_CURR_X_COUNT	0xFFC00D70	/* DMA Channel 5 Current X Count Register */
+#define DMA5_CURR_Y_COUNT	0xFFC00D78	/* DMA Channel 5 Current Y Count Register */
+#define DMA5_IRQ_STATUS		0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register */
+#define DMA5_PERIPHERAL_MAP	0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register */
+
+#define DMA6_CONFIG		0xFFC00D88	/* DMA Channel 6 Configuration Register */
+#define DMA6_NEXT_DESC_PTR	0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register */
+#define DMA6_START_ADDR		0xFFC00D84	/* DMA Channel 6 Start Address Register */
+#define DMA6_X_COUNT		0xFFC00D90	/* DMA Channel 6 X Count Register */
+#define DMA6_Y_COUNT		0xFFC00D98	/* DMA Channel 6 Y Count Register */
+#define DMA6_X_MODIFY		0xFFC00D94	/* DMA Channel 6 X Modify Register */
+#define DMA6_Y_MODIFY		0xFFC00D9C	/* DMA Channel 6 Y Modify Register */
+#define DMA6_CURR_DESC_PTR	0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register */
+#define DMA6_CURR_ADDR		0xFFC00DA4	/* DMA Channel 6 Current Address Register */
+#define DMA6_CURR_X_COUNT	0xFFC00DB0	/* DMA Channel 6 Current X Count Register */
+#define DMA6_CURR_Y_COUNT	0xFFC00DB8	/* DMA Channel 6 Current Y Count Register */
+#define DMA6_IRQ_STATUS		0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register */
+#define DMA6_PERIPHERAL_MAP	0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register */
+
+#define DMA7_CONFIG		0xFFC00DC8	/* DMA Channel 7 Configuration Register */
+#define DMA7_NEXT_DESC_PTR	0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register */
+#define DMA7_START_ADDR		0xFFC00DC4	/* DMA Channel 7 Start Address Register */
+#define DMA7_X_COUNT		0xFFC00DD0	/* DMA Channel 7 X Count Register */
+#define DMA7_Y_COUNT		0xFFC00DD8	/* DMA Channel 7 Y Count Register */
+#define DMA7_X_MODIFY		0xFFC00DD4	/* DMA Channel 7 X Modify Register */
+#define DMA7_Y_MODIFY		0xFFC00DDC	/* DMA Channel 7 Y Modify Register */
+#define DMA7_CURR_DESC_PTR	0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register */
+#define DMA7_CURR_ADDR		0xFFC00DE4	/* DMA Channel 7 Current Address Register */
+#define DMA7_CURR_X_COUNT	0xFFC00DF0	/* DMA Channel 7 Current X Count Register */
+#define DMA7_CURR_Y_COUNT	0xFFC00DF8	/* DMA Channel 7 Current Y Count Register */
+#define DMA7_IRQ_STATUS		0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register */
+#define DMA7_PERIPHERAL_MAP	0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register */
+
+#define MDMA_D1_CONFIG		0xFFC00E88	/* MemDMA Stream 1 Destination Configuration Register */
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC00E80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
+#define MDMA_D1_START_ADDR	0xFFC00E84	/* MemDMA Stream 1 Destination Start Address Register */
+#define MDMA_D1_X_COUNT		0xFFC00E90	/* MemDMA Stream 1 Destination X Count Register */
+#define MDMA_D1_Y_COUNT		0xFFC00E98	/* MemDMA Stream 1 Destination Y Count Register */
+#define MDMA_D1_X_MODIFY	0xFFC00E94	/* MemDMA Stream 1 Destination X Modify Register */
+#define MDMA_D1_Y_MODIFY	0xFFC00E9C	/* MemDMA Stream 1 Destination Y Modify Register */
+#define MDMA_D1_CURR_DESC_PTR	0xFFC00EA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
+#define MDMA_D1_CURR_ADDR	0xFFC00EA4	/* MemDMA Stream 1 Destination Current Address Register */
+#define MDMA_D1_CURR_X_COUNT	0xFFC00EB0	/* MemDMA Stream 1 Destination Current X Count Register */
+#define MDMA_D1_CURR_Y_COUNT	0xFFC00EB8	/* MemDMA Stream 1 Destination Current Y Count Register */
+#define MDMA_D1_IRQ_STATUS	0xFFC00EA8	/* MemDMA Stream 1 Destination Interrupt/Status Register */
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC00EAC	/* MemDMA Stream 1 Destination Peripheral Map Register */
+
+#define MDMA_S1_CONFIG		0xFFC00EC8	/* MemDMA Stream 1 Source Configuration Register */
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC00EC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register */
+#define MDMA_S1_START_ADDR	0xFFC00EC4	/* MemDMA Stream 1 Source Start Address Register */
+#define MDMA_S1_X_COUNT		0xFFC00ED0	/* MemDMA Stream 1 Source X Count Register */
+#define MDMA_S1_Y_COUNT		0xFFC00ED8	/* MemDMA Stream 1 Source Y Count Register */
+#define MDMA_S1_X_MODIFY	0xFFC00ED4	/* MemDMA Stream 1 Source X Modify Register */
+#define MDMA_S1_Y_MODIFY	0xFFC00EDC	/* MemDMA Stream 1 Source Y Modify Register */
+#define MDMA_S1_CURR_DESC_PTR	0xFFC00EE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register */
+#define MDMA_S1_CURR_ADDR	0xFFC00EE4	/* MemDMA Stream 1 Source Current Address Register */
+#define MDMA_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA Stream 1 Source Current X Count Register */
+#define MDMA_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA Stream 1 Source Current Y Count Register */
+#define MDMA_S1_IRQ_STATUS	0xFFC00EE8	/* MemDMA Stream 1 Source Interrupt/Status Register */
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC00EEC	/* MemDMA Stream 1 Source Peripheral Map Register */
+
+#define MDMA_D0_CONFIG		0xFFC00E08	/* MemDMA Stream 0 Destination Configuration Register */
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC00E00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
+#define MDMA_D0_START_ADDR	0xFFC00E04	/* MemDMA Stream 0 Destination Start Address Register */
+#define MDMA_D0_X_COUNT		0xFFC00E10	/* MemDMA Stream 0 Destination X Count Register */
+#define MDMA_D0_Y_COUNT		0xFFC00E18	/* MemDMA Stream 0 Destination Y Count Register */
+#define MDMA_D0_X_MODIFY	0xFFC00E14	/* MemDMA Stream 0 Destination X Modify Register */
+#define MDMA_D0_Y_MODIFY	0xFFC00E1C	/* MemDMA Stream 0 Destination Y Modify Register */
+#define MDMA_D0_CURR_DESC_PTR	0xFFC00E20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
+#define MDMA_D0_CURR_ADDR	0xFFC00E24	/* MemDMA Stream 0 Destination Current Address Register */
+#define MDMA_D0_CURR_X_COUNT	0xFFC00E30	/* MemDMA Stream 0 Destination Current X Count Register */
+#define MDMA_D0_CURR_Y_COUNT	0xFFC00E38	/* MemDMA Stream 0 Destination Current Y Count Register */
+#define MDMA_D0_IRQ_STATUS	0xFFC00E28	/* MemDMA Stream 0 Destination Interrupt/Status Register */
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC00E2C	/* MemDMA Stream 0 Destination Peripheral Map Register */
+
+#define MDMA_S0_CONFIG		0xFFC00E48	/* MemDMA Stream 0 Source Configuration Register */
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC00E40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register */
+#define MDMA_S0_START_ADDR	0xFFC00E44	/* MemDMA Stream 0 Source Start Address Register */
+#define MDMA_S0_X_COUNT		0xFFC00E50	/* MemDMA Stream 0 Source X Count Register */
+#define MDMA_S0_Y_COUNT		0xFFC00E58	/* MemDMA Stream 0 Source Y Count Register */
+#define MDMA_S0_X_MODIFY	0xFFC00E54	/* MemDMA Stream 0 Source X Modify Register */
+#define MDMA_S0_Y_MODIFY	0xFFC00E5C	/* MemDMA Stream 0 Source Y Modify Register */
+#define MDMA_S0_CURR_DESC_PTR	0xFFC00E60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register */
+#define MDMA_S0_CURR_ADDR	0xFFC00E64	/* MemDMA Stream 0 Source Current Address Register */
+#define MDMA_S0_CURR_X_COUNT	0xFFC00E70	/* MemDMA Stream 0 Source Current X Count Register */
+#define MDMA_S0_CURR_Y_COUNT	0xFFC00E78	/* MemDMA Stream 0 Source Current Y Count Register */
+#define MDMA_S0_IRQ_STATUS	0xFFC00E68	/* MemDMA Stream 0 Source Interrupt/Status Register */
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC00E6C	/* MemDMA Stream 0 Source Peripheral Map Register */
+
+/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
+
+#define PPI_CONTROL			0xFFC01000	/* PPI Control Register */
+#define PPI_STATUS			0xFFC01004	/* PPI Status Register */
+#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register */
+#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register */
+#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register */
+
+/*********************************************************************************** */
+/* System MMR Register Bits */
+/******************************************************************************* */
+
+/* ********************* PLL AND RESET MASKS ************************ */
+
+/* PLL_CTL Masks */
+#define PLL_CLKIN			0x0000  /* Pass CLKIN to PLL */
+#define PLL_CLKIN_DIV2			0x0001  /* Pass CLKIN/2 to PLL */
+#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
+#define PLL_OFF				0x0002  /* Shut off PLL clocks */
+#define STOPCK_OFF			0x0008  /* Core clock off */
+#define STOPCK				0x0008	/* Core Clock Off									*/
+#define PDWN				0x0020  /* Put the PLL in a Deep Sleep state */
+#if !defined(__ADSPBF538__)
+/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */
+# define IN_DELAY        0x0040  /* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY       0x0080  /* Add 200ps Delay To EBIU Output Signals */
+#endif
+#define BYPASS				0x0100  /* Bypass the PLL */
+/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
+#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
+
+/* PLL_DIV Masks */
+#define SSEL				0x000F	/* System Select						*/
+#define	CSEL				0x0030	/* Core Select							*/
+
+#define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */
+
+#define CCLK_DIV1              0x00000000	/* CCLK = VCO / 1 */
+#define CCLK_DIV2              0x00000010	/* CCLK = VCO / 2 */
+#define CCLK_DIV4              0x00000020	/* CCLK = VCO / 4 */
+#define CCLK_DIV8              0x00000030	/* CCLK = VCO / 8 */
+/* PLL_DIV Macros														*/
+#define SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
+
+/* PLL_STAT Masks																	*/
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
+#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
+#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
+
+/* VR_CTL Masks																	*/
+#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
+#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
+#define	FREQ_333		0x0001	/* 		Switching Frequency Is 333 kHz			*/
+#define	FREQ_667		0x0002	/* 		Switching Frequency Is 667 kHz			*/
+#define	FREQ_1000		0x0003	/* 		Switching Frequency Is 1 MHz			*/
+
+#define GAIN			0x000C	/* Voltage Level Gain	*/
+#define	GAIN_5			0x0000	/* 		GAIN = 5		*/
+#define	GAIN_10			0x0004	/* 		GAIN = 10		*/
+#define	GAIN_20			0x0008	/* 		GAIN = 20		*/
+#define	GAIN_50			0x000C	/* 		GAIN = 50		*/
+
+#define	VLEV			0x00F0	/* Internal Voltage Level					*/
+#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
+#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
+#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
+#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
+#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
+#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
+#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
+#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
+#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
+#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
+
+#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
+#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SWRST Mask */
+#define SYSTEM_RESET	0x0007	/* Initiates A System Software Reset			*/
+#define	DOUBLE_FAULT	0x0008	/* Core Double Fault Causes Reset				*/
+#define RESET_DOUBLE	0x2000	/* SW Reset Generated By Core Double-Fault		*/
+#define RESET_WDOG	0x4000	/* SW Reset Generated By Watchdog Timer			*/
+#define RESET_SOFTWARE	0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/
+
+/* SYSCR Masks																				*/
+#define BMODE			0x0006	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
+#define	NOBOOT			0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
+
+    /* SIC_IAR0 Masks */
+
+#define P0_IVG(x)    ((x)-7)	/* Peripheral #0 assigned IVG #x  */
+#define P1_IVG(x)    ((x)-7) << 0x4	/* Peripheral #1 assigned IVG #x  */
+#define P2_IVG(x)    ((x)-7) << 0x8	/* Peripheral #2 assigned IVG #x  */
+#define P3_IVG(x)    ((x)-7) << 0xC	/* Peripheral #3 assigned IVG #x  */
+#define P4_IVG(x)    ((x)-7) << 0x10	/* Peripheral #4 assigned IVG #x  */
+#define P5_IVG(x)    ((x)-7) << 0x14	/* Peripheral #5 assigned IVG #x  */
+#define P6_IVG(x)    ((x)-7) << 0x18	/* Peripheral #6 assigned IVG #x  */
+#define P7_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #7 assigned IVG #x  */
+
+/* SIC_IAR1 Masks */
+
+#define P8_IVG(x)     ((x)-7)	/* Peripheral #8 assigned IVG #x  */
+#define P9_IVG(x)     ((x)-7) << 0x4	/* Peripheral #9 assigned IVG #x  */
+#define P10_IVG(x)    ((x)-7) << 0x8	/* Peripheral #10 assigned IVG #x  */
+#define P11_IVG(x)    ((x)-7) << 0xC	/* Peripheral #11 assigned IVG #x  */
+#define P12_IVG(x)    ((x)-7) << 0x10	/* Peripheral #12 assigned IVG #x  */
+#define P13_IVG(x)    ((x)-7) << 0x14	/* Peripheral #13 assigned IVG #x  */
+#define P14_IVG(x)    ((x)-7) << 0x18	/* Peripheral #14 assigned IVG #x  */
+#define P15_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #15 assigned IVG #x  */
+
+/* SIC_IAR2 Masks */
+#define P16_IVG(x)    ((x)-7)	/* Peripheral #16 assigned IVG #x  */
+#define P17_IVG(x)    ((x)-7) << 0x4	/* Peripheral #17 assigned IVG #x  */
+#define P18_IVG(x)    ((x)-7) << 0x8	/* Peripheral #18 assigned IVG #x  */
+#define P19_IVG(x)    ((x)-7) << 0xC	/* Peripheral #19 assigned IVG #x  */
+#define P20_IVG(x)    ((x)-7) << 0x10	/* Peripheral #20 assigned IVG #x  */
+#define P21_IVG(x)    ((x)-7) << 0x14	/* Peripheral #21 assigned IVG #x  */
+#define P22_IVG(x)    ((x)-7) << 0x18	/* Peripheral #22 assigned IVG #x  */
+#define P23_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #23 assigned IVG #x  */
+
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
+/* ***************************** UART CONTROLLER MASKS ********************** */
+
+/* UART_LCR Register */
+
+#define DLAB	0x80
+#define SB      0x40
+#define STP      0x20
+#define EPS     0x10
+#define PEN	0x08
+#define STB	0x04
+#define WLS(x)	((x-5) & 0x03)
+
+#define DLAB_P	0x07
+#define SB_P	0x06
+#define STP_P	0x05
+#define EPS_P	0x04
+#define PEN_P	0x03
+#define STB_P	0x02
+#define WLS_P1	0x01
+#define WLS_P0	0x00
+
+/* UART_MCR Register */
+#define LOOP_ENA	0x10
+#define LOOP_ENA_P	0x04
+
+/* UART_LSR Register */
+#define TEMT	0x40
+#define THRE	0x20
+#define BI	0x10
+#define FE	0x08
+#define PE	0x04
+#define OE	0x02
+#define DR	0x01
+
+#define TEMP_P	0x06
+#define THRE_P	0x05
+#define BI_P	0x04
+#define FE_P	0x03
+#define PE_P	0x02
+#define OE_P	0x01
+#define DR_P	0x00
+
+/* UART_IER Register */
+#define ELSI	0x04
+#define ETBEI	0x02
+#define ERBFI	0x01
+
+#define ELSI_P	0x02
+#define ETBEI_P	0x01
+#define ERBFI_P	0x00
+
+/* UART_IIR Register */
+#define STATUS(x)	((x << 1) & 0x06)
+#define NINT		0x01
+#define STATUS_P1	0x02
+#define STATUS_P0	0x01
+#define NINT_P		0x00
+#define IIR_TX_READY    0x02	/* UART_THR empty                               */
+#define IIR_RX_READY    0x04	/* Receive data ready                           */
+#define IIR_LINE_CHANGE 0x06	/* Receive line status                          */
+#define IIR_STATUS	0x06
+
+/* UART_GCTL Register */
+#define FFE	0x20
+#define FPE	0x10
+#define RPOLC	0x08
+#define TPOLC	0x04
+#define IREN	0x02
+#define UCEN	0x01
+
+#define FFE_P	0x05
+#define FPE_P	0x04
+#define RPOLC_P	0x03
+#define TPOLC_P	0x02
+#define IREN_P	0x01
+#define UCEN_P	0x00
+
+/* **********  SERIAL PORT MASKS  ********************** */
+
+/* SPORTx_TCR1 Masks */
+#define TSPEN    0x0001		/* TX enable  */
+#define ITCLK    0x0002		/* Internal TX Clock Select  */
+#define TDTYPE   0x000C		/* TX Data Formatting Select */
+#define DTYPE_NORM	0x0000		/* Data Format Normal							*/
+#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
+#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
+#define TLSBIT   0x0010		/* TX Bit Order */
+#define ITFS     0x0200		/* Internal TX Frame Sync Select  */
+#define TFSR     0x0400		/* TX Frame Sync Required Select  */
+#define DITFS    0x0800		/* Data Independent TX Frame Sync Select  */
+#define LTFS     0x1000		/* Low TX Frame Sync Select  */
+#define LATFS    0x2000		/* Late TX Frame Sync Select  */
+#define TCKFE    0x4000		/* TX Clock Falling Edge Select  */
+
+/* SPORTx_TCR2 Masks */
+#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \
+    defined(__ADSPBF533__)
+# define SLEN	    0x001F	/*TX Word Length  */
+#else
+# define SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length (2 - 31)				*/
+#endif
+#define TXSE        0x0100	/*TX Secondary Enable */
+#define TSFSE       0x0200	/*TX Stereo Frame Sync Enable */
+#define TRFST       0x0400	/*TX Right-First Data Order  */
+
+/* SPORTx_RCR1 Masks */
+#define RSPEN    0x0001		/* RX enable  */
+#define IRCLK    0x0002		/* Internal RX Clock Select  */
+#define RDTYPE   0x000C		/* RX Data Formatting Select */
+#define DTYPE_NORM	0x0000		/* no companding							*/
+#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
+#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
+#define RLSBIT   0x0010		/* RX Bit Order */
+#define IRFS     0x0200		/* Internal RX Frame Sync Select  */
+#define RFSR     0x0400		/* RX Frame Sync Required Select  */
+#define LRFS     0x1000		/* Low RX Frame Sync Select  */
+#define LARFS    0x2000		/* Late RX Frame Sync Select  */
+#define RCKFE    0x4000		/* RX Clock Falling Edge Select  */
+
+/* SPORTx_RCR2 Masks */
+/* SLEN defined above */
+#define RXSE        0x0100	/*RX Secondary Enable */
+#define RSFSE       0x0200	/*RX Stereo Frame Sync Enable */
+#define RRFST       0x0400	/*Right-First Data Order  */
+
+/*SPORTx_STAT Masks */
+#define RXNE		0x0001	/*RX FIFO Not Empty Status */
+#define RUVF	    	0x0002	/*RX Underflow Status */
+#define ROVF		0x0004	/*RX Overflow Status */
+#define TXF		0x0008	/*TX FIFO Full Status */
+#define TUVF         	0x0010	/*TX Underflow Status */
+#define TOVF         	0x0020	/*TX Overflow Status */
+#define TXHRE        	0x0040	/*TX Hold Register Empty */
+
+/*SPORTx_MCMC1 Masks */
+#define SP_WSIZE		0x0000F000	/*Multichannel Window Size Field */
+#define SP_WOFF		0x000003FF	/*Multichannel Window Offset Field */
+/* SPORTx_MCMC1 Macros															*/
+#define SET_SP_WOFF(x)	((x) & 0x3FF) 	/* Multichannel Window Offset Field			*/
+/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits						*/
+#define SET_SP_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1	*/
+
+/*SPORTx_MCMC2 Masks */
+#define MCCRM		0x00000003 	/*Multichannel Clock Recovery Mode */
+#define REC_BYPASS	0x0000		/* Bypass Mode (No Clock Recovery)				*/
+#define REC_2FROM4	0x0002		/* Recover 2 MHz Clock from 4 MHz Clock			*/
+#define REC_8FROM16	0x0003		/* Recover 8 MHz Clock from 16 MHz Clock		*/
+#define MCDTXPE		0x00000004 	/*Multichannel DMA Transmit Packing */
+#define MCDRXPE		0x00000008 	/*Multichannel DMA Receive Packing */
+#define MCMEN		0x00000010 	/*Multichannel Frame Mode Enable */
+#define FSDR		0x00000080 	/*Multichannel Frame Sync to Data Relationship */
+#define MFD		0x0000F000 	/*Multichannel Frame Delay    */
+#define MFD_0		0x0000		/* Multichannel Frame Delay = 0					*/
+#define MFD_1		0x1000		/* Multichannel Frame Delay = 1					*/
+#define MFD_2		0x2000		/* Multichannel Frame Delay = 2					*/
+#define MFD_3		0x3000		/* Multichannel Frame Delay = 3					*/
+#define MFD_4		0x4000		/* Multichannel Frame Delay = 4					*/
+#define MFD_5		0x5000		/* Multichannel Frame Delay = 5					*/
+#define MFD_6		0x6000		/* Multichannel Frame Delay = 6					*/
+#define MFD_7		0x7000		/* Multichannel Frame Delay = 7					*/
+#define MFD_8		0x8000		/* Multichannel Frame Delay = 8					*/
+#define MFD_9		0x9000		/* Multichannel Frame Delay = 9					*/
+#define MFD_10		0xA000		/* Multichannel Frame Delay = 10				*/
+#define MFD_11		0xB000		/* Multichannel Frame Delay = 11				*/
+#define MFD_12		0xC000		/* Multichannel Frame Delay = 12				*/
+#define MFD_13		0xD000		/* Multichannel Frame Delay = 13				*/
+#define MFD_14		0xE000		/* Multichannel Frame Delay = 14				*/
+#define MFD_15		0xF000		/* Multichannel Frame Delay = 15				*/
+
+/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
+
+/*  PPI_CONTROL Masks         */
+#define PORT_EN              0x00000001	/* PPI Port Enable  */
+#define PORT_DIR             0x00000002	/* PPI Port Direction       */
+#define XFR_TYPE             0x0000000C	/* PPI Transfer Type  */
+#define PORT_CFG             0x00000030	/* PPI Port Configuration */
+#define FLD_SEL              0x00000040	/* PPI Active Field Select */
+#define PACK_EN              0x00000080	/* PPI Packing Mode */
+#define DMA32                0x00000100	/* PPI 32-bit DMA Enable */
+#define SKIP_EN              0x00000200	/* PPI Skip Element Enable */
+#define SKIP_EO              0x00000400	/* PPI Skip Even/Odd Elements */
+#define DLENGTH              0x00003800	/* PPI Data Length  */
+#define DLEN_8			0x0000	/* Data Length = 8 Bits                         */
+#define DLEN_10			0x0800	/* Data Length = 10 Bits                        */
+#define DLEN_11			0x1000	/* Data Length = 11 Bits                        */
+#define DLEN_12			0x1800	/* Data Length = 12 Bits                        */
+#define DLEN_13			0x2000	/* Data Length = 13 Bits                        */
+#define DLEN_14			0x2800	/* Data Length = 14 Bits                        */
+#define DLEN_15			0x3000	/* Data Length = 15 Bits                        */
+#define DLEN_16			0x3800	/* Data Length = 16 Bits                        */
+#define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
+#define POL                  0x0000C000	/* PPI Signal Polarities       */
+#define POLC		0x4000		/* PPI Clock Polarity				*/
+#define POLS		0x8000		/* PPI Frame Sync Polarity			*/
+
+/* PPI_STATUS Masks                                          */
+#define FLD	             0x00000400	/* Field Indicator   */
+#define FT_ERR	             0x00000800	/* Frame Track Error */
+#define OVR	             0x00001000	/* FIFO Overflow Error */
+#define UNDR	             0x00002000	/* FIFO Underrun Error */
+#define ERR_DET	      	     0x00004000	/* Error Detected Indicator */
+#define ERR_NCOR	     0x00008000	/* Error Not Corrected Indicator */
+
+/* **********  DMA CONTROLLER MASKS  *********************8 */
+
+/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */
+#define DMAEN	        0x00000001	/* Channel Enable */
+#define WNR	   	0x00000002	/* Channel Direction (W/R*) */
+#define WDSIZE_8	0x00000000	/* Word Size 8 bits */
+#define WDSIZE_16	0x00000004	/* Word Size 16 bits */
+#define WDSIZE_32	0x00000008	/* Word Size 32 bits */
+#define DMA2D	        0x00000010	/* 2D/1D* Mode */
+#define RESTART         0x00000020	/* Restart */
+#define DI_SEL	        0x00000040	/* Data Interrupt Select */
+#define DI_EN	        0x00000080	/* Data Interrupt Enable */
+#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)   */
+#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1                                             */
+#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2                                             */
+#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3                                             */
+#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4                                             */
+#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5                                             */
+#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6                                             */
+#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7                                             */
+#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8                                             */
+#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9                                             */
+#define NDSIZE	        0x00000900	/* Next Descriptor Size */
+#define DMAFLOW	        0x00007000	/* Flow Control */
+#define DMAFLOW_STOP		0x0000	/* Stop Mode */
+#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
+#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
+#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */
+
+#define DMAEN_P	            	0	/* Channel Enable */
+#define WNR_P	            	1	/* Channel Direction (W/R*) */
+#define DMA2D_P	        	4	/* 2D/1D* Mode */
+#define RESTART_P	      	5	/* Restart */
+#define DI_SEL_P	     	6	/* Data Interrupt Select */
+#define DI_EN_P	            	7	/* Data Interrupt Enable */
+
+/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
+
+#define DMA_DONE		0x00000001	/* DMA Done Indicator */
+#define DMA_ERR	        	0x00000002	/* DMA Error Indicator */
+#define DFETCH	            	0x00000004	/* Descriptor Fetch Indicator */
+#define DMA_RUN	            	0x00000008	/* DMA Running Indicator */
+
+#define DMA_DONE_P	    	0	/* DMA Done Indicator */
+#define DMA_ERR_P     		1	/* DMA Error Indicator */
+#define DFETCH_P     		2	/* Descriptor Fetch Indicator */
+#define DMA_RUN_P     		3	/* DMA Running Indicator */
+
+/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+
+#define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
+#define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */
+#define PCAP8	            0x00000080	/* DMA 8-bit Operation Indicator   */
+#define PCAP16	            0x00000100	/* DMA 16-bit Operation Indicator */
+#define PCAP32	            0x00000200	/* DMA 32-bit Operation Indicator */
+#define PCAPWR	            0x00000400	/* DMA Write Operation Indicator */
+#define PCAPRD	            0x00000800	/* DMA Read Operation Indicator */
+#define PMAP	            0x00007000	/* DMA Peripheral Map Field */
+
+#define PMAP_PPI		0x0000	/* PMAP PPI Port DMA */
+#define	PMAP_SPORT0RX		0x1000	/* PMAP SPORT0 Receive DMA */
+#define PMAP_SPORT0TX		0x2000	/* PMAP SPORT0 Transmit DMA */
+#define	PMAP_SPORT1RX		0x3000	/* PMAP SPORT1 Receive DMA */
+#define PMAP_SPORT1TX		0x4000	/* PMAP SPORT1 Transmit DMA */
+#define PMAP_SPI		0x5000	/* PMAP SPI DMA */
+#define PMAP_UARTRX		0x6000	/* PMAP UART Receive DMA */
+#define PMAP_UARTTX		0x7000	/* PMAP UART Transmit DMA */
+
+/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */
+
+/* PWM Timer bit definitions */
+
+/* TIMER_ENABLE Register */
+#define TIMEN0	0x0001
+#define TIMEN1	0x0002
+#define TIMEN2	0x0004
+
+#define TIMEN0_P	0x00
+#define TIMEN1_P	0x01
+#define TIMEN2_P	0x02
+
+/* TIMER_DISABLE Register */
+#define TIMDIS0	0x0001
+#define TIMDIS1	0x0002
+#define TIMDIS2	0x0004
+
+#define TIMDIS0_P	0x00
+#define TIMDIS1_P	0x01
+#define TIMDIS2_P	0x02
+
+/* TIMER_STATUS Register */
+#define TIMIL0		0x0001
+#define TIMIL1		0x0002
+#define TIMIL2		0x0004
+#define TOVF_ERR0		0x0010	/* Timer 0 Counter Overflow		*/
+#define TOVF_ERR1		0x0020	/* Timer 1 Counter Overflow		*/
+#define TOVF_ERR2		0x0040	/* Timer 2 Counter Overflow		*/
+#define TRUN0		0x1000
+#define TRUN1		0x2000
+#define TRUN2		0x4000
+
+#define TIMIL0_P	0x00
+#define TIMIL1_P	0x01
+#define TIMIL2_P	0x02
+#define TOVF_ERR0_P		0x04
+#define TOVF_ERR1_P		0x05
+#define TOVF_ERR2_P		0x06
+#define TRUN0_P		0x0C
+#define TRUN1_P		0x0D
+#define TRUN2_P		0x0E
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 		TOVF_ERR0
+#define TOVL_ERR1 		TOVF_ERR1
+#define TOVL_ERR2 		TOVF_ERR2
+#define TOVL_ERR0_P		TOVF_ERR0_P
+#define TOVL_ERR1_P 		TOVF_ERR1_P
+#define TOVL_ERR2_P 		TOVF_ERR2_P
+
+/* TIMERx_CONFIG Registers */
+#define PWM_OUT		0x0001
+#define WDTH_CAP	0x0002
+#define EXT_CLK		0x0003
+#define PULSE_HI	0x0004
+#define PERIOD_CNT	0x0008
+#define IRQ_ENA		0x0010
+#define TIN_SEL		0x0020
+#define OUT_DIS		0x0040
+#define CLK_SEL		0x0080
+#define TOGGLE_HI	0x0100
+#define EMU_RUN		0x0200
+#define ERR_TYP(x)	((x & 0x03) << 14)
+
+#define TMODE_P0		0x00
+#define TMODE_P1		0x01
+#define PULSE_HI_P		0x02
+#define PERIOD_CNT_P		0x03
+#define IRQ_ENA_P		0x04
+#define TIN_SEL_P		0x05
+#define OUT_DIS_P		0x06
+#define CLK_SEL_P		0x07
+#define TOGGLE_HI_P		0x08
+#define EMU_RUN_P		0x09
+#define ERR_TYP_P0		0x0E
+#define ERR_TYP_P1		0x0F
+
+/*/ ******************   PROGRAMMABLE FLAG MASKS  ********************* */
+
+/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
+#define PF0         0x0001
+#define PF1         0x0002
+#define PF2         0x0004
+#define PF3         0x0008
+#define PF4         0x0010
+#define PF5         0x0020
+#define PF6         0x0040
+#define PF7         0x0080
+#define PF8         0x0100
+#define PF9         0x0200
+#define PF10        0x0400
+#define PF11        0x0800
+#define PF12        0x1000
+#define PF13        0x2000
+#define PF14        0x4000
+#define PF15        0x8000
+
+/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  BIT POSITIONS */
+#define PF0_P         0
+#define PF1_P         1
+#define PF2_P         2
+#define PF3_P         3
+#define PF4_P         4
+#define PF5_P         5
+#define PF6_P         6
+#define PF7_P         7
+#define PF8_P         8
+#define PF9_P         9
+#define PF10_P        10
+#define PF11_P        11
+#define PF12_P        12
+#define PF13_P        13
+#define PF14_P        14
+#define PF15_P        15
+
+/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  **************** */
+
+/* SPI_CTL Masks */
+#define TIMOD                  0x00000003	/* Transfer initiation mode and interrupt generation */
+#define RDBR_CORE	0x0000		/* 		RDBR Read Initiates, IRQ When RDBR Full		*/
+#define	TDBR_CORE	0x0001		/* 		TDBR Write Initiates, IRQ When TDBR Empty	*/
+#define RDBR_DMA	0x0002		/* 		DMA Read, DMA Until FIFO Empty				*/
+#define TDBR_DMA	0x0003		/* 		DMA Write, DMA Until FIFO Full				*/
+#define SZ                     0x00000004	/* Send Zero (=0) or last (=1) word when TDBR empty. */
+#define GM                     0x00000008	/* When RDBR full, get more (=1) data or discard (=0) incoming Data */
+#define PSSE                   0x00000010	/* Enable (=1) Slave-Select input for Master. */
+#define EMISO                  0x00000020	/* Enable (=1) MISO pin as an output. */
+#define SIZE                   0x00000100	/* Word length (0 => 8 bits, 1 => 16 bits) */
+#define LSBF                   0x00000200	/* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
+#define CPHA                   0x00000400	/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
+#define CPOL                   0x00000800	/* Clock polarity (0 => active-high, 1 => active-low) */
+#define MSTR                   0x00001000	/* Configures SPI as master (=1) or slave (=0) */
+#define WOM                    0x00002000	/* Open drain (=1) data output enable (for MOSI and MISO) */
+#define SPE                    0x00004000	/* SPI module enable (=1), disable (=0) */
+
+/* SPI_FLG Masks */
+#define FLS1                   0x00000002	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2                   0x00000004	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3                   0x00000008	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4                   0x00000010	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5                   0x00000020	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6                   0x00000040	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7                   0x00000080	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1                   0x00000200	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
+#define FLG2                   0x00000400	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3                   0x00000800	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
+#define FLG4                   0x00001000	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
+#define FLG5                   0x00002000	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
+#define FLG6                   0x00004000	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
+#define FLG7                   0x00008000	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_FLG Bit Positions */
+#define FLS1_P                 0x00000001	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2_P                 0x00000002	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3_P                 0x00000003	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4_P                 0x00000004	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5_P                 0x00000005	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6_P                 0x00000006	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7_P                 0x00000007	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1_P                 0x00000009	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
+#define FLG2_P                 0x0000000A	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3_P                 0x0000000B	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
+#define FLG4_P                 0x0000000C	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
+#define FLG5_P                 0x0000000D	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
+#define FLG6_P                 0x0000000E	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
+#define FLG7_P                 0x0000000F	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_STAT Masks */
+#define SPIF                   0x00000001	/* Set (=1) when SPI single-word transfer complete */
+#define MODF                   0x00000002	/* Set (=1) in a master device when some other device tries to become master */
+#define TXE                    0x00000004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
+#define TXS                    0x00000008	/* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
+#define RBSY                   0x00000010	/* Set (=1) when data is received with RDBR full */
+#define RXS                    0x00000020	/* SPI_RDBR Data Buffer Status (0=Empty, 1=Full)  */
+#define TXCOL                  0x00000040	/* When set (=1), corrupt data may have been transmitted  */
+
+/* SPIx_FLG Masks																	*/
+#define FLG1E	0xFDFF		/* Activates SPI_FLOUT1 							*/
+#define FLG2E	0xFBFF		/* Activates SPI_FLOUT2								*/
+#define FLG3E	0xF7FF		/* Activates SPI_FLOUT3								*/
+#define FLG4E	0xEFFF		/* Activates SPI_FLOUT4								*/
+#define FLG5E	0xDFFF		/* Activates SPI_FLOUT5								*/
+#define FLG6E	0xBFFF		/* Activates SPI_FLOUT6								*/
+#define FLG7E	0x7FFF		/* Activates SPI_FLOUT7								*/
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
+
+/* AMGCTL Masks */
+#define AMCKEN			0x00000001	/* Enable CLKOUT */
+#define	AMBEN_NONE		0x00000000	/* All Banks Disabled								*/
+#define AMBEN_B0		0x00000002	/* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1		0x00000004	/* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2		0x00000006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL		0x00000008	/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+
+/* AMGCTL Bit Positions */
+#define AMCKEN_P		0x00000000	/* Enable CLKOUT */
+#define AMBEN_P0		0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1		0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
+#define AMBEN_P2		0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+
+/* AMBCTL0 Masks */
+#define B0RDYEN	0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL 0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1	0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2	0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3	0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4	0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1	0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2	0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3	0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4	0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1	0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2	0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3	0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0	0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1			0x00000100	/* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2			0x00000200	/* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3			0x00000300	/* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4			0x00000400	/* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5			0x00000500	/* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6			0x00000600	/* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7			0x00000700	/* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8			0x00000800	/* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9			0x00000900	/* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10		0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11		0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12		0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13		0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14		0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15		0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1			0x00001000	/* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2			0x00002000	/* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3			0x00003000	/* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4			0x00004000	/* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5			0x00005000	/* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6			0x00006000	/* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7			0x00007000	/* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8			0x00008000	/* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9			0x00009000	/* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10		0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11		0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12		0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13		0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14		0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15		0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN			0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL		0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1			0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2			0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3			0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4			0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1			0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2			0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3			0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4			0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1			0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2			0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3			0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0			0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1			0x01000000	/* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2			0x02000000	/* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3			0x03000000	/* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4			0x04000000	/* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5			0x05000000	/* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6			0x06000000	/* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7			0x07000000	/* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8			0x08000000	/* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9			0x09000000	/* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10		0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11		0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12		0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13		0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14		0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15		0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1			0x10000000	/* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2			0x20000000	/* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3			0x30000000	/* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4			0x40000000	/* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5			0x50000000	/* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6			0x60000000	/* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7			0x70000000	/* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8			0x80000000	/* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9			0x90000000	/* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10		0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11		0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12		0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13		0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14		0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15		0xF0000000	/* Bank 1 Write Access Time = 15 cycles */
+
+/* AMBCTL1 Masks */
+#define B2RDYEN			0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL		0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1			0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2			0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3			0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4			0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1			0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2			0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3			0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4			0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1			0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2			0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3			0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0			0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1			0x00000100	/* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2			0x00000200	/* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3			0x00000300	/* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4			0x00000400	/* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5			0x00000500	/* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6			0x00000600	/* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7			0x00000700	/* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8			0x00000800	/* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9			0x00000900	/* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10		0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11		0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12		0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13		0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14		0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15		0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1			0x00001000	/* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2			0x00002000	/* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3			0x00003000	/* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4			0x00004000	/* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5			0x00005000	/* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6			0x00006000	/* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7			0x00007000	/* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8			0x00008000	/* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9			0x00009000	/* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10		0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11		0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12		0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13		0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14		0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15		0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN			0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL		0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1			0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2			0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3			0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4			0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1			0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2			0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3			0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4			0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1			0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2			0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3			0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0			0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1			0x01000000	/* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2			0x02000000	/* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3			0x03000000	/* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4			0x04000000	/* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5			0x05000000	/* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6			0x06000000	/* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7			0x07000000	/* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8			0x08000000	/* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9			0x09000000	/* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10		0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11		0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12		0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13		0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14		0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15		0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1			0x10000000	/* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2			0x20000000	/* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3			0x30000000	/* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4			0x40000000	/* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5			0x50000000	/* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6			0x60000000	/* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7			0x70000000	/* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8			0x80000000	/* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9			0x90000000	/* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10		0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11		0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12		0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13		0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14		0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15		0xF0000000	/* Bank 3 Write Access Time = 15 cycles */
+
+/* **********************  SDRAM CONTROLLER MASKS  *************************** */
+
+/* SDGCTL Masks */
+#define SCTLE			0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define CL_2			0x00000008	/* SDRAM CAS latency = 2 cycles */
+#define CL_3			0x0000000C	/* SDRAM CAS latency = 3 cycles */
+#define PFE			0x00000010	/* Enable SDRAM prefetch */
+#define PFP			0x00000020	/* Prefetch has priority over AMC requests */
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle */
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles */
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles */
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles */
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles */
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles */
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles */
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles */
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles */
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles */
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles */
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles */
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles */
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles */
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles */
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle */
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles */
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles */
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles */
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles */
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles */
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles */
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle */
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles */
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles */
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles */
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles */
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles */
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles */
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle */
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles */
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles */
+#define PUPSD			0x00200000	/*Power-up start delay */
+#define PSM			0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS				0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS			0x01000000	/* Start SDRAM self-refresh mode */
+#define EBUFE			0x02000000	/* Enable external buffering timing */
+#define FBBRW			0x04000000	/* Fast back-to-back read write enable */
+#define EMREN			0x10000000	/* Extended mode register enable */
+#define TCSR			0x20000000	/* Temp compensated self refresh value 85 deg C */
+#define CDDBG			0x40000000	/* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EBE			0x00000001	/* Enable SDRAM external bank */
+#define EBSZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EBSZ_32			0x00000002	/* SDRAM external bank size = 32MB */
+#define EBSZ_64			0x00000004	/* SDRAM external bank size = 64MB */
+#define EBSZ_128			0x00000006	/* SDRAM external bank size = 128MB */
+#define EBCAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EBCAW_9			0x00000010	/* SDRAM external bank column address width = 9 bits */
+#define EBCAW_10			0x00000020	/* SDRAM external bank column address width = 9 bits */
+#define EBCAW_11			0x00000030	/* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI			0x00000001	/* SDRAM controller is idle  */
+#define SDSRA			0x00000002	/* SDRAM SDRAM self refresh is active */
+#define SDPUA			0x00000004	/* SDRAM power up active  */
+#define SDRS			0x00000008	/* SDRAM is in reset state */
+#define SDEASE		      0x00000010	/* SDRAM EAB sticky error status - W1C */
+#define BGSTAT			0x00000020	/* Bus granted */
+
+
+#endif				/* _DEF_BF532_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h
new file mode 100644
index 00000000000..bd9d5e94307
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/dma.h
@@ -0,0 +1,54 @@
+/*****************************************************************************
+*
+*        BF-533/2/1 Specific Declarations
+*
+****************************************************************************/
+/*
+ * File:         include/asm-blackfin/mach-bf533/dma.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_BLACKFIN_DMA_CHANNEL 12
+
+#define CH_PPI          0
+#define CH_SPORT0_RX    1
+#define CH_SPORT0_TX    2
+#define CH_SPORT1_RX    3
+#define CH_SPORT1_TX    4
+#define CH_SPI          5
+#define CH_UART_RX      6
+#define CH_UART_TX      7
+#define CH_MEM_STREAM0_DEST     8	 /* TX */
+#define CH_MEM_STREAM0_SRC      9	 /* RX */
+#define CH_MEM_STREAM1_DEST     10	 /* TX */
+#define CH_MEM_STREAM1_SRC      11	 /* RX */
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
new file mode 100644
index 00000000000..5aa38e5da6b
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -0,0 +1,173 @@
+/*
+ * File:         include/asm-blackfin/mach-bf533/defBF532.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BF533_IRQ_H_
+#define _BF533_IRQ_H_
+
+/*
+ * Interrupt source definitions
+             Event Source    Core Event Name
+Core        Emulation               **
+ Events         (highest priority)  EMU         0
+            Reset                   RST         1
+            NMI                     NMI         2
+            Exception               EVX         3
+            Reserved                --          4
+            Hardware Error          IVHW        5
+            Core Timer              IVTMR       6 *
+	    PLL Wakeup Interrupt    IVG7	7
+	    DMA Error (generic)	    IVG7	8
+	    PPI Error Interrupt     IVG7	9
+	    SPORT0 Error Interrupt  IVG7	10
+	    SPORT1 Error Interrupt  IVG7	11
+	    SPI Error Interrupt	    IVG7	12
+	    UART Error Interrupt    IVG7	13
+	    RTC Interrupt	    IVG8        14
+	    DMA0 Interrupt (PPI)    IVG8	15
+	    DMA1 (SPORT0 RX)	    IVG9	16
+	    DMA2 (SPORT0 TX)	    IVG9        17
+	    DMA3 (SPORT1 RX)        IVG9	18
+	    DMA4 (SPORT1 TX)	    IVG9	19
+	    DMA5 (PPI)		    IVG10	20
+	    DMA6 (UART RX)	    IVG10	21
+	    DMA7 (UART TX)	    IVG10	22
+	    Timer0		    IVG11	23
+	    Timer1		    IVG11	24
+	    Timer2		    IVG11	25
+	    PF Interrupt A	    IVG12	26
+	    PF Interrupt B	    IVG12	27
+	    DMA8/9 Interrupt	    IVG13	28
+	    DMA10/11 Interrupt	    IVG13	29
+	    Watchdog Timer	    IVG13	30
+
+            Softirq		    IVG14       31
+            System Call    --
+                 (lowest priority)  IVG15       32 *
+ */
+#define SYS_IRQS	31
+#define NR_PERI_INTS	24
+
+/* The ABSTRACT IRQ definitions */
+/** the first seven of the following are fixed, the rest you change if you need to **/
+#define	IRQ_EMU			0	/*Emulation */
+#define	IRQ_RST			1	/*reset */
+#define	IRQ_NMI			2	/*Non Maskable */
+#define	IRQ_EVX			3	/*Exception */
+#define	IRQ_UNUSED		4	/*- unused interrupt*/
+#define	IRQ_HWERR		5	/*Hardware Error */
+#define	IRQ_CORETMR		6	/*Core timer */
+
+#define	IRQ_PLL_WAKEUP		7	/*PLL Wakeup Interrupt */
+#define	IRQ_DMA_ERROR		8	/*DMA Error (general) */
+#define	IRQ_PPI_ERROR		9	/*PPI Error Interrupt */
+#define	IRQ_SPORT0_ERROR	10	/*SPORT0 Error Interrupt */
+#define	IRQ_SPORT1_ERROR	11	/*SPORT1 Error Interrupt */
+#define	IRQ_SPI_ERROR		12	/*SPI Error Interrupt */
+#define	IRQ_UART_ERROR		13	/*UART Error Interrupt */
+#define	IRQ_RTC			14	/*RTC Interrupt */
+#define	IRQ_PPI			15	/*DMA0 Interrupt (PPI) */
+#define	IRQ_SPORT0_RX		16	/*DMA1 Interrupt (SPORT0 RX) */
+#define	IRQ_SPORT0_TX		17	/*DMA2 Interrupt (SPORT0 TX) */
+#define	IRQ_SPORT1_RX		18	/*DMA3 Interrupt (SPORT1 RX) */
+#define	IRQ_SPORT1_TX		19	/*DMA4 Interrupt (SPORT1 TX) */
+#define 	IRQ_SPI			20	/*DMA5 Interrupt (SPI) */
+#define	IRQ_UART_RX		21	/*DMA6 Interrupt (UART RX) */
+#define	IRQ_UART_TX		22	/*DMA7 Interrupt (UART TX) */
+#define	IRQ_TMR0		23	/*Timer 0 */
+#define	IRQ_TMR1		24	/*Timer 1 */
+#define	IRQ_TMR2		25	/*Timer 2 */
+#define	IRQ_PROG_INTA		26	/*Programmable Flags A (8) */
+#define	IRQ_PROG_INTB		27	/*Programmable Flags B (8) */
+#define	IRQ_MEM_DMA0		28	/*DMA8/9 Interrupt (Memory DMA Stream 0) */
+#define	IRQ_MEM_DMA1		29	/*DMA10/11 Interrupt (Memory DMA Stream 1) */
+#define	IRQ_WATCH	   	30	/*Watch Dog Timer */
+
+#define IRQ_PF0			33
+#define IRQ_PF1			34
+#define IRQ_PF2			35
+#define IRQ_PF3			36
+#define IRQ_PF4			37
+#define IRQ_PF5			38
+#define IRQ_PF6			39
+#define IRQ_PF7			40
+#define IRQ_PF8			41
+#define IRQ_PF9			42
+#define IRQ_PF10		43
+#define IRQ_PF11		44
+#define IRQ_PF12		45
+#define IRQ_PF13		46
+#define IRQ_PF14		47
+#define IRQ_PF15		48
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define	NR_IRQS		(IRQ_PF15+1)
+
+#define IVG7			7
+#define IVG8			8
+#define IVG9			9
+#define IVG10			10
+#define IVG11			11
+#define IVG12			12
+#define IVG13			13
+#define IVG14			14
+#define IVG15			15
+
+/* IAR0 BIT FIELDS*/
+#define RTC_ERROR_POS			28
+#define UART_ERROR_POS			24
+#define SPORT1_ERROR_POS		20
+#define SPI_ERROR_POS			16
+#define SPORT0_ERROR_POS		12
+#define PPI_ERROR_POS			8
+#define DMA_ERROR_POS			4
+#define PLLWAKE_ERROR_POS		0
+
+/* IAR1 BIT FIELDS*/
+#define DMA7_UARTTX_POS			28
+#define DMA6_UARTRX_POS			24
+#define DMA5_SPI_POS			20
+#define DMA4_SPORT1TX_POS		16
+#define DMA3_SPORT1RX_POS		12
+#define DMA2_SPORT0TX_POS		8
+#define DMA1_SPORT0RX_POS		4
+#define DMA0_PPI_POS			0
+
+/* IAR2 BIT FIELDS*/
+#define WDTIMER_POS			28
+#define MEMDMA1_POS			24
+#define MEMDMA0_POS			20
+#define PFB_POS				16
+#define PFA_POS				12
+#define TIMER2_POS			8
+#define TIMER1_POS			4
+#define TIMER0_POS			0
+
+#endif				/* _BF533_IRQ_H_ */
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h
new file mode 100644
index 00000000000..ed2034bf10e
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/mem_init.h
@@ -0,0 +1,297 @@
+/*
+ * File:         include/asm-blackfin/mach-bf533/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \
+     CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+  /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref)  / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h
new file mode 100644
index 00000000000..581fc6eea78
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h
@@ -0,0 +1,171 @@
+/*
+ * File:         include/asm-blackfin/mach-bf533/mem_map.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MEM_MAP_533_H_
+#define _MEM_MAP_533_H_
+
+#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
+#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x400
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+/* Memory Map for ADSP-BF533 processors */
+
+#ifdef CONFIG_BF533
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0x14000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0x14000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF532 processors */
+
+#ifdef CONFIG_BF532
+#define L1_CODE_START       0xFFA08000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0xC000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0xC000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF531 processors */
+
+#ifdef CONFIG_BF531
+#define L1_CODE_START       0xFFA08000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+#define L1_CODE_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x0000
+
+
+#ifdef CONFIG_BFIN_DCACHE
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB  | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB  | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif
+
+#endif
+
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START	0xFFB00000
+#define L1_SCRATCH_LENGTH	0x1000
+
+#endif				/* _MEM_MAP_533_H_ */
diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
new file mode 100644
index 00000000000..685a2651dcd
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -0,0 +1,67 @@
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_CLK	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_PPI0_FS2	(P_DONTCARE)
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF8))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF9))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF10))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF11))
+#define P_PPI0_D0	(P_DONTCARE)
+#define P_PPI0_D1	(P_DONTCARE)
+#define P_PPI0_D2	(P_DONTCARE)
+#define P_PPI0_D3	(P_DONTCARE)
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF14))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF13))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF12))
+
+#define P_SPORT1_TSCLK	(P_DONTCARE)
+#define P_SPORT1_RSCLK	(P_DONTCARE)
+#define P_SPORT0_TSCLK	(P_DONTCARE)
+#define P_SPORT0_RSCLK	(P_DONTCARE)
+#define P_UART0_RX	(P_DONTCARE)
+#define P_UART0_TX	(P_DONTCARE)
+#define P_SPORT1_DRSEC	(P_DONTCARE)
+#define P_SPORT1_RFS	(P_DONTCARE)
+#define P_SPORT1_DTPRI	(P_DONTCARE)
+#define P_SPORT1_DTSEC	(P_DONTCARE)
+#define P_SPORT1_TFS	(P_DONTCARE)
+#define P_SPORT1_DRPRI	(P_DONTCARE)
+#define P_SPORT0_DRSEC	(P_DONTCARE)
+#define P_SPORT0_RFS	(P_DONTCARE)
+#define P_SPORT0_DTPRI	(P_DONTCARE)
+#define P_SPORT0_DTSEC	(P_DONTCARE)
+#define P_SPORT0_TFS	(P_DONTCARE)
+#define P_SPORT0_DRPRI	(P_DONTCARE)
+
+#define P_SPI0_MOSI	(P_DONTCARE)
+#define P_SPI0_MISO	(P_DONTCARE)
+#define P_SPI0_SCK	(P_DONTCARE)
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+
+#define P_TMR2		(P_DONTCARE)
+#define P_TMR1		(P_DONTCARE)
+#define P_TMR0		(P_DONTCARE)
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF1))
+
+
+
+
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index 7d79e0f9503..f51994b7a2b 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 7e789dbef03..42a57b0acb2 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -15,6 +15,12 @@ config BFIN537_BLUETECHNIX_CM
 	help
 	  CM-BF537 support for EVAL- and DEV-Board.
 
+config BFIN537_BLUETECHNIX_TCM
+	bool "Bluetechnix TCM-BF537"
+	depends on (BF537)
+	help
+	  TCM-BF537 support for EVAL- and DEV-Board.
+
 config PNAV10
 	bool "PNAV board"
 	depends on (BF537)
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index c94f7a5b821..7168cc14afd 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -5,5 +5,6 @@
 obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 73f2142875e..dde14720b0e 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -33,6 +33,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -56,16 +57,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF537";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -307,6 +308,55 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0xE0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 	{
@@ -395,7 +445,7 @@ static struct platform_device bfin_mac_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	64
+#define PATA_INT	IRQ_PF14
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 2,
@@ -510,6 +560,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	&bfin_pata_device,
 #endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
 };
 
 static int __init cm_bf537_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 7d250828dad..78a13d5bfd5 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
@@ -166,10 +165,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB800 + 4,
+		.end	= 0x203FB800 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
@@ -302,16 +306,16 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -614,43 +618,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 	&bfin_pcmcia_cf_device,
@@ -712,10 +679,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport0_uart_device,
 	&bfin_sport1_uart_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init stamp_init(void)
@@ -727,9 +690,6 @@ static int __init stamp_init(void)
 				ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 18ddf7a5200..48c4cd2d1be 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -100,16 +100,16 @@ static struct platform_device net2272_bfin_device = {
 
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name       = "uboot",
+		.name       = "bootloader(spi)",
 		.size       = PSIZE_UBOOT,
 		.offset     = 0x000000,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name       = "initramfs",
+		.name       = "initramfs(spi)",
 		.size       = PSIZE_INITRAMFS,
 		.offset     = PSIZE_UBOOT
 	}, {
-		.name       = "opt",
+		.name       = "opt(spi)",
 		.size       = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
 		.offset     = PSIZE_UBOOT + PSIZE_INITRAMFS,
 	}
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 51c3bab14a6..f9174c11cbd 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -231,16 +231,16 @@ static struct platform_device net2272_bfin_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 671f9d67f23..8482d22321f 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -29,9 +29,12 @@
  */
 
 #include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -355,22 +358,100 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+	{
+		.name   = "linux kernel(nand)",
+		.size   = 0x400000,
+		.offset = 0,
+	}, {
+		.name   = "file system(nand)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+#endif
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 1
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+	else
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF3
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+	.chip = {
+		.chip_delay = 30,
+#ifdef CONFIG_MTD_PARTITIONS
+		.part_probe_types = part_probes,
+		.partitions = bfin_plat_nand_partitions,
+		.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+#endif
+	},
+	.ctrl = {
+		.cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
+		.dev_ready = bfin_plat_nand_dev_ready,
+	},
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+	.start = 0x20212000,
+	.end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+	.flags = IORESOURCE_IO,
+};
+
+static struct platform_device bfin_async_nand_device = {
+	.name = "gen_nand",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_plat_nand_resources,
+	.dev = {
+		.platform_data = &bfin_plat_nand_data,
+	},
+};
+
+static void bfin_plat_nand_init(void)
+{
+	gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void) {}
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0xE0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "MAC Address",
+		.name       = "MAC Address(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = 0x3F0000,
 		.mask_flags = MTD_WRITEABLE,
@@ -404,16 +485,16 @@ static struct platform_device stamp_flash_device = {
 	|| defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -503,6 +584,30 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 
 #if defined(CONFIG_MTD_DATAFLASH) \
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name = "SPI Dataflash",
+	.parts = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
 /* DataFlash chip */
 static struct bfin5xx_spi_chip data_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
@@ -528,9 +633,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
 	{	/* DataFlash chip */
 		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
 		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_dataflash_data,
 		.controller_data = &data_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -780,7 +886,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
+#define PATA_INT	IRQ_PF5
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 1,
@@ -922,6 +1028,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_gpios_device,
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+	&bfin_async_nand_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&stamp_flash_device,
 #endif
@@ -936,6 +1046,7 @@ static int __init stamp_init(void)
 				ARRAY_SIZE(bfin_i2c_board_info));
 #endif
 
+	bfin_plat_nand_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
new file mode 100644
index 00000000000..d5ff705a512
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -0,0 +1,590 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/tcm_bf537.c
+ * Based on:     arch/blackfin/mach-bf533/boards/cm_bf537.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM BF537";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836-spi",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+	{
+		.modalias = "ad9960-spi",
+		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &ad9960_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20200000,
+		.end = 0x20200000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PH14,
+		.end = IRQ_PH14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0xE0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+	&hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
+};
+
+static int __init cm_bf537_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+	return 0;
+}
+
+arch_initcall(cm_bf537_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 48cd58a410a..12eb5cc571d 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -30,327 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise General-Purpose I/O Modules on BF537 */
-	/* Rev 0.0 Anomaly 05000212 - PORTx_FER,
-	 * PORT_MUX Registers Do Not accept "writes" correctly:
-	 */
-	p0.h = hi(BFIN_PORT_MUX);
-	p0.l = lo(BFIN_PORT_MUX);
-#if ANOMALY_05000212
-	R0.L = W[P0]; /* Read */
-	SSYNC;
-#endif
-	R0 = (PGDE_UART | PFTE_UART)(Z);
-#if ANOMALY_05000212
-	W[P0] = R0.L; /* Write */
-	SSYNC;
-#endif
-	W[P0] = R0.L; /* Enable both UARTS */
-	SSYNC;
-
-	p0.h = hi(PORTF_FER);
-	p0.l = lo(PORTF_FER);
-#if ANOMALY_05000212
-	R0.L = W[P0]; /* Read */
-	SSYNC;
-#endif
-	R0 = 0x000F(Z);
-#if ANOMALY_05000212
-	W[P0] = R0.L; /* Write */
-	SSYNC;
-#endif
-	/* Enable peripheral function of PORTF for UART0 and UART1 */
-	W[P0] = R0.L;
-	SSYNC;
-
-#if !defined(CONFIG_BF534)
-	p0.h = hi(EMAC_SYSTAT);
-	p0.l = lo(EMAC_SYSTAT);
-	R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
-	R0.l = 0xFFFF;
-	[P0] = R0;
-	SSYNC;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -430,12 +116,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
@@ -458,13 +138,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR);
-	p0.l = lo(SIC_IWR);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
new file mode 100644
index 00000000000..8460ab9c324
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -0,0 +1,163 @@
+/*
+ * File: include/asm-blackfin/mach-bf537/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ *  - Revision C, 02/08/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 silicon - sorry */
+#if __SILICON_REVISION__ < 2
+# error will not work on BF537 silicon version 0.0 or 0.1
+#endif
+
+#if defined(__ADSPBF534__)
+# define ANOMALY_BF534 1
+#else
+# define ANOMALY_BF534 0
+#endif
+#if defined(__ADSPBF536__)
+# define ANOMALY_BF536 1
+#else
+# define ANOMALY_BF536 0
+#endif
+#if defined(__ADSPBF537__)
+# define ANOMALY_BF537 1
+#else
+# define ANOMALY_BF537 0
+#endif
+
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H cannot be used to access 16-bit System MMR registers */
+#define ANOMALY_05000122 (1)
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
+#define ANOMALY_05000167 (1)
+/* PPI_DELAY not functional in PPI modes with 0 frame syncs */
+#define ANOMALY_05000180 (1)
+/* Instruction Cache Is Not Functional */
+#define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
+/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
+/* Spurious Hardware Error from an access in the shadow of a conditional branch */
+#define ANOMALY_05000245 (1)
+/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
+#define ANOMALY_05000247 (1)
+/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
+/* EMAC Tx DMA error after an early frame abort */
+#define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
+/* Maximum external clock speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
+/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
+/* EMAC MDIO input latched on wrong MDC edge */
+#define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
+/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
+/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */
+#define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
+/* ICPLB_STATUS MMR register may be corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
+/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
+/* Stores to data cache may be lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
+/* Hardware loop corrupted when taking an ICPLB exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
+/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
+/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */
+#define ANOMALY_05000265 (1)
+/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
+#define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
+/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
+/* Certain data cache write through modes fail for VDDint <=0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM memory may be lost */
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
+/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
+/* Disabling Peripherals with DMA running may cause DMA system instability */
+#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
+/* SPI Master boot mode does not work well with Atmel Data flash devices */
+#define ANOMALY_05000280 (1)
+/* False Hardware Error Exception when ISR context is not restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
+/* Memory DMA corruption with 32-bit data and traffic control */
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
+/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
+#define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
+/* SPORTs may receive bad data if FIFOs fill up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
+/* Memory to memory DMA source/destination descriptors must be in same memory space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
+/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
+#define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
+/* False hardware errors caused by fetches at the boundary of reserved memory */
+#define ANOMALY_05000310 (1)
+/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI is level sensitive on first transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode: collisions occur in Full Duplex mode */
+#define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
+#define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
+#define ANOMALY_05000322 (1)
+/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
+#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (1)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
+#define ANOMALY_05000359 (1)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000363 (0)
+
+#endif
diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
new file mode 100644
index 00000000000..cfe2a221112
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
@@ -0,0 +1,141 @@
+/*
+ * File:         include/asm-blackfin/mach-bf537/bf537.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __MACH_BF537_H__
+#define __MACH_BF537_H__
+
+#define SUPPORTED_REVID 2
+
+/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
+
+#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE)	/* SPI_STAT */
+#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF)	/* SPORTx_STAT */
+#define PPI_ERR_MASK (0xFFFF & ~FLD)	/* PPI_STATUS */
+#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE)	/* EMAC_SYSTAT */
+#define UART_ERR_MASK_STAT1 (0x4)	/* UARTx_IIR */
+#define UART_ERR_MASK_STAT0 (0x2)	/* UARTx_IIR */
+#define CAN_ERR_MASK  (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF)	/* CAN_GIF */
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR	0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#ifdef CONFIG_BF537
+#define CPU "BF537"
+#define CPUID 0x027c8000
+#endif
+#ifdef CONFIG_BF536
+#define CPU "BF536"
+#define CPUID 0x027c8000
+#endif
+#ifdef CONFIG_BF534
+#define CPU "BF534"
+#define CPUID 0x027c6000
+#endif
+#ifndef CPU
+#define	CPU "UNKNOWN"
+#define CPUID 0x0
+#endif
+
+#endif				/* __MACH_BF537_H__  */
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
new file mode 100644
index 00000000000..1bf56ffa22f
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -0,0 +1,195 @@
+/*
+ * file:         include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	blackfin serial driver header files
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
+#define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
+#define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
+#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
+#define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+
+#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+# define CONFIG_SERIAL_BFIN_CTSRTS
+
+# ifndef CONFIG_UART0_CTS_PIN
+#  define CONFIG_UART0_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART0_RTS_PIN
+#  define CONFIG_UART0_RTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_CTS_PIN
+#  define CONFIG_UART1_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_RTS_PIN
+#  define CONFIG_UART1_RTS_PIN -1
+# endif
+#endif
+/*
+ * The pin configuration is different from schematic
+ */
+struct bfin_serial_port {
+        struct uart_port        port;
+        unsigned int            old_status;
+	unsigned int lsr;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	int			tx_done;
+	int			tx_count;
+	struct circ_buf		rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int			rx_dma_nrows;
+	unsigned int		tx_dma_channel;
+	unsigned int		rx_dma_channel;
+	struct work_struct	tx_dma_workqueue;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	struct timer_list 	cts_timer;
+	int		cts_pin;
+	int 		rts_pin;
+#endif
+};
+
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+	uart->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+	uart->lsr = 0;
+	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
+struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+struct bfin_serial_res {
+	unsigned long	uart_base_addr;
+	int		uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	unsigned int	uart_tx_dma_channel;
+	unsigned int	uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	int	uart_cts_pin;
+	int	uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+	0xFFC00400,
+	IRQ_UART0_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART0_TX,
+	CH_UART0_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	CONFIG_UART0_CTS_PIN,
+	CONFIG_UART0_RTS_PIN,
+#endif
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+	0xFFC02000,
+	IRQ_UART1_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART1_TX,
+	CH_UART1_RX,
+#endif
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	CONFIG_UART1_CTS_PIN,
+	CONFIG_UART1_RTS_PIN,
+#endif
+	},
+#endif
+};
+
+int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+
+#define DRIVER_NAME "bfin-uart"
+
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	peripheral_request(P_UART1_TX, DRIVER_NAME);
+	peripheral_request(P_UART1_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	if (uart->cts_pin >= 0) {
+		gpio_request(uart->cts_pin, DRIVER_NAME);
+		gpio_direction_input(uart->cts_pin);
+	}
+
+	if (uart->rts_pin >= 0) {
+		gpio_request(uart->rts_pin, DRIVER_NAME);
+		gpio_direction_output(uart->rts_pin, 0);
+	}
+#endif
+}
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_sir.h b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
new file mode 100644
index 00000000000..cfd8ad4f1f2
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
@@ -0,0 +1,142 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART0_RX,
+	CH_UART0_RX,
+	CH_UART0_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+	0xFFC02000,
+	IRQ_UART1_RX,
+	CH_UART1_RX,
+	CH_UART1_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR1
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
new file mode 100644
index 00000000000..cffc786b2a2
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -0,0 +1,165 @@
+/*
+ * File:         include/asm-blackfin/mach-bf537/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF537_FAMILY
+
+#include "bf537.h"
+#include "mem_map.h"
+#include "defBF534.h"
+#include "anomaly.h"
+
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+#include "defBF537.h"
+#endif
+
+#if !defined(__ASSEMBLY__)
+#include "cdefBF534.h"
+
+/* UART 0*/
+#define bfin_read_UART_THR() bfin_read_UART0_THR()
+#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
+#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
+#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
+#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
+#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
+#define bfin_read_UART_IER() bfin_read_UART0_IER()
+#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
+#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
+#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
+#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
+#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
+#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
+#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
+#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
+#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
+#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
+#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
+#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
+#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
+#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
+#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
+
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536)
+#include "cdefBF537.h"
+#endif
+#endif
+
+/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */
+
+/* UART_IIR Register */
+#define STATUS(x)	((x << 1) & 0x06)
+#define STATUS_P1	0x02
+#define STATUS_P0	0x01
+
+/* DMA Channnel */
+#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
+#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
+#define CH_UART_RX CH_UART0_RX
+#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX()
+#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val)
+#define CH_UART_TX CH_UART0_TX
+
+/* System Interrupt Controller */
+#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX()
+#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val)
+#define IRQ_UART_RX IRQ_UART0_RX
+#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX()
+#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val)
+#define	IRQ_UART_TX IRQ_UART0_TX
+#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR()
+#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val)
+#define	IRQ_UART_ERROR IRQ_UART0_ERROR
+
+/* MMR Registers*/
+#define bfin_read_UART_THR() bfin_read_UART0_THR()
+#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
+#define BFIN_UART_THR UART0_THR
+#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
+#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
+#define BFIN_UART_RBR UART0_RBR
+#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
+#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
+#define BFIN_UART_DLL UART0_DLL
+#define bfin_read_UART_IER() bfin_read_UART0_IER()
+#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
+#define BFIN_UART_IER UART0_IER
+#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
+#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
+#define BFIN_UART_DLH UART0_DLH
+#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
+#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
+#define BFIN_UART_IIR UART0_IIR
+#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
+#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
+#define BFIN_UART_LCR UART0_LCR
+#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
+#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
+#define BFIN_UART_MCR UART0_MCR
+#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
+#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
+#define BFIN_UART_LSR UART0_LSR
+#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
+#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
+#define BFIN_UART_SCR  UART0_SCR
+#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
+#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
+#define BFIN_UART_GCTL UART0_GCTL
+
+#define BFIN_UART_NR_PORTS	2
+
+#define OFFSET_THR              0x00	/* Transmit Holding register            */
+#define OFFSET_RBR              0x00	/* Receive Buffer register              */
+#define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
+#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
+#define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
+#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
+#define OFFSET_LCR              0x0C	/* Line Control Register                */
+#define OFFSET_MCR              0x10	/* Modem Control Register               */
+#define OFFSET_LSR              0x14	/* Line Status Register                 */
+#define OFFSET_MSR              0x18	/* Modem Status Register                */
+#define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
+#define OFFSET_GCTL             0x24	/* Global Control Register              */
+
+/* DPMC*/
+#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
+#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
+#define STOPCK_OFF STOPCK
+
+/* PLL_DIV Masks													*/
+#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
+#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
+#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
+#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
+
+#endif
diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
new file mode 100644
index 00000000000..88d491cd9f3
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -0,0 +1,1819 @@
+/*
+ * File:         include/asm-blackfin/mach-bf537/cdefbf534.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF534_H
+#define _CDEF_BF534_H
+
+#include <asm/blackfin.h>
+
+/* Include all Core registers and bit definitions 									*/
+#include "defBF534.h"
+
+/* Include core specific register pointer definitions 								*/
+#include <asm/cdef_LPBlackfin.h>
+
+#include <asm/system.h>
+
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_DIV()                  bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)              bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL()                   bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)             bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT()              bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)          bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID()                   bfin_read32(CHIPID)
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define bfin_read_SWRST()                    bfin_read16(SWRST)
+#define bfin_write_SWRST(val)                bfin_write16(SWRST,val)
+#define bfin_read_SYSCR()                    bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)                bfin_write16(SYSCR,val)
+#define bfin_read_SIC_RVECT()                bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)            bfin_write32(SIC_RVECT,val)
+#define bfin_read_SIC_IMASK()                bfin_read32(SIC_IMASK)
+#define bfin_write_SIC_IMASK(val)            bfin_write32(SIC_IMASK,val)
+#define bfin_read_SIC_IAR0()                 bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)             bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1()                 bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)             bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2()                 bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)             bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3()                 bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)             bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_ISR()                  bfin_read32(SIC_ISR)
+#define bfin_write_SIC_ISR(val)              bfin_write32(SIC_ISR,val)
+#define bfin_read_SIC_IWR()                  bfin_read32(SIC_IWR)
+#define bfin_write_SIC_IWR(val)              bfin_write32(SIC_IWR,val)
+
+/* Watchdog Timer		(0xFFC00200 - 0xFFC002FF)									*/
+#define bfin_read_WDOG_CTL()                 bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)             bfin_write16(WDOG_CTL,val)
+#define bfin_read_WDOG_CNT()                 bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)             bfin_write32(WDOG_CNT,val)
+#define bfin_read_WDOG_STAT()                bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)            bfin_write32(WDOG_STAT,val)
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define bfin_read_RTC_STAT()                 bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)             bfin_write32(RTC_STAT,val)
+#define bfin_read_RTC_ICTL()                 bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)             bfin_write16(RTC_ICTL,val)
+#define bfin_read_RTC_ISTAT()                bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)            bfin_write16(RTC_ISTAT,val)
+#define bfin_read_RTC_SWCNT()                bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)            bfin_write16(RTC_SWCNT,val)
+#define bfin_read_RTC_ALARM()                bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)            bfin_write32(RTC_ALARM,val)
+#define bfin_read_RTC_FAST()                 bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val)             bfin_write16(RTC_FAST,val)
+#define bfin_read_RTC_PREN()                 bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)             bfin_write16(RTC_PREN,val)
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define bfin_read_UART0_THR()                bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val)            bfin_write16(UART0_THR,val)
+#define bfin_read_UART0_RBR()                bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val)            bfin_write16(UART0_RBR,val)
+#define bfin_read_UART0_DLL()                bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val)            bfin_write16(UART0_DLL,val)
+#define bfin_read_UART0_IER()                bfin_read16(UART0_IER)
+#define bfin_write_UART0_IER(val)            bfin_write16(UART0_IER,val)
+#define bfin_read_UART0_DLH()                bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val)            bfin_write16(UART0_DLH,val)
+#define bfin_read_UART0_IIR()                bfin_read16(UART0_IIR)
+#define bfin_write_UART0_IIR(val)            bfin_write16(UART0_IIR,val)
+#define bfin_read_UART0_LCR()                bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val)            bfin_write16(UART0_LCR,val)
+#define bfin_read_UART0_MCR()                bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val)            bfin_write16(UART0_MCR,val)
+#define bfin_read_UART0_LSR()                bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val)            bfin_write16(UART0_LSR,val)
+#define bfin_read_UART0_MSR()                bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val)            bfin_write16(UART0_MSR,val)
+#define bfin_read_UART0_SCR()                bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val)            bfin_write16(UART0_SCR,val)
+#define bfin_read_UART0_GCTL()               bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)           bfin_write16(UART0_GCTL,val)
+
+/* SPI Controller		(0xFFC00500 - 0xFFC005FF)									*/
+#define bfin_read_SPI_CTL()                  bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)              bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG()                  bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)              bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT()                 bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)             bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR()                 bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)             bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR()                 bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)             bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD()                 bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)             bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW()               bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)           bfin_write16(SPI_SHADOW,val)
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define bfin_read_TIMER0_CONFIG()            bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)        bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER()           bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)       bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD()            bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)        bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH()             bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)         bfin_write32(TIMER0_WIDTH,val)
+
+#define bfin_read_TIMER1_CONFIG()            bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)        bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER()           bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)       bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD()            bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)        bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH()             bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)         bfin_write32(TIMER1_WIDTH,val)
+
+#define bfin_read_TIMER2_CONFIG()            bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)        bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER()           bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)       bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD()            bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)        bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH()             bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)         bfin_write32(TIMER2_WIDTH,val)
+
+#define bfin_read_TIMER3_CONFIG()            bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)        bfin_write16(TIMER3_CONFIG,val)
+#define bfin_read_TIMER3_COUNTER()           bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)       bfin_write32(TIMER3_COUNTER,val)
+#define bfin_read_TIMER3_PERIOD()            bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)        bfin_write32(TIMER3_PERIOD,val)
+#define bfin_read_TIMER3_WIDTH()             bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)         bfin_write32(TIMER3_WIDTH,val)
+
+#define bfin_read_TIMER4_CONFIG()            bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)        bfin_write16(TIMER4_CONFIG,val)
+#define bfin_read_TIMER4_COUNTER()           bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)       bfin_write32(TIMER4_COUNTER,val)
+#define bfin_read_TIMER4_PERIOD()            bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)        bfin_write32(TIMER4_PERIOD,val)
+#define bfin_read_TIMER4_WIDTH()             bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)         bfin_write32(TIMER4_WIDTH,val)
+
+#define bfin_read_TIMER5_CONFIG()            bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)        bfin_write16(TIMER5_CONFIG,val)
+#define bfin_read_TIMER5_COUNTER()           bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)       bfin_write32(TIMER5_COUNTER,val)
+#define bfin_read_TIMER5_PERIOD()            bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)        bfin_write32(TIMER5_PERIOD,val)
+#define bfin_read_TIMER5_WIDTH()             bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)         bfin_write32(TIMER5_WIDTH,val)
+
+#define bfin_read_TIMER6_CONFIG()            bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)        bfin_write16(TIMER6_CONFIG,val)
+#define bfin_read_TIMER6_COUNTER()           bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)       bfin_write32(TIMER6_COUNTER,val)
+#define bfin_read_TIMER6_PERIOD()            bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)        bfin_write32(TIMER6_PERIOD,val)
+#define bfin_read_TIMER6_WIDTH()             bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)         bfin_write32(TIMER6_WIDTH,val)
+
+#define bfin_read_TIMER7_CONFIG()            bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)        bfin_write16(TIMER7_CONFIG,val)
+#define bfin_read_TIMER7_COUNTER()           bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)       bfin_write32(TIMER7_COUNTER,val)
+#define bfin_read_TIMER7_PERIOD()            bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)        bfin_write32(TIMER7_PERIOD,val)
+#define bfin_read_TIMER7_WIDTH()             bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)         bfin_write32(TIMER7_WIDTH,val)
+
+#define bfin_read_TIMER_ENABLE()             bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)         bfin_write16(TIMER_ENABLE,val)
+#define bfin_read_TIMER_DISABLE()            bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)        bfin_write16(TIMER_DISABLE,val)
+#define bfin_read_TIMER_STATUS()             bfin_read32(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)         bfin_write32(TIMER_STATUS,val)
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)								*/
+#define bfin_read_PORTFIO()                  bfin_read16(PORTFIO)
+#define bfin_write_PORTFIO(val)              bfin_write16(PORTFIO,val)
+#define bfin_read_PORTFIO_CLEAR()            bfin_read16(PORTFIO_CLEAR)
+#define bfin_write_PORTFIO_CLEAR(val)        bfin_write16(PORTFIO_CLEAR,val)
+#define bfin_read_PORTFIO_SET()              bfin_read16(PORTFIO_SET)
+#define bfin_write_PORTFIO_SET(val)          bfin_write16(PORTFIO_SET,val)
+#define bfin_read_PORTFIO_TOGGLE()           bfin_read16(PORTFIO_TOGGLE)
+#define bfin_write_PORTFIO_TOGGLE(val)       bfin_write16(PORTFIO_TOGGLE,val)
+#define bfin_read_PORTFIO_MASKA()            bfin_read16(PORTFIO_MASKA)
+#define bfin_write_PORTFIO_MASKA(val)        bfin_write16(PORTFIO_MASKA,val)
+#define bfin_read_PORTFIO_MASKA_CLEAR()      bfin_read16(PORTFIO_MASKA_CLEAR)
+#define bfin_write_PORTFIO_MASKA_CLEAR(val)  bfin_write16(PORTFIO_MASKA_CLEAR,val)
+#define bfin_read_PORTFIO_MASKA_SET()        bfin_read16(PORTFIO_MASKA_SET)
+#define bfin_write_PORTFIO_MASKA_SET(val)    bfin_write16(PORTFIO_MASKA_SET,val)
+#define bfin_read_PORTFIO_MASKA_TOGGLE()     bfin_read16(PORTFIO_MASKA_TOGGLE)
+#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTFIO_MASKB()            bfin_read16(PORTFIO_MASKB)
+#define bfin_write_PORTFIO_MASKB(val)        bfin_write16(PORTFIO_MASKB,val)
+#define bfin_read_PORTFIO_MASKB_CLEAR()      bfin_read16(PORTFIO_MASKB_CLEAR)
+#define bfin_write_PORTFIO_MASKB_CLEAR(val)  bfin_write16(PORTFIO_MASKB_CLEAR,val)
+#define bfin_read_PORTFIO_MASKB_SET()        bfin_read16(PORTFIO_MASKB_SET)
+#define bfin_write_PORTFIO_MASKB_SET(val)    bfin_write16(PORTFIO_MASKB_SET,val)
+#define bfin_read_PORTFIO_MASKB_TOGGLE()     bfin_read16(PORTFIO_MASKB_TOGGLE)
+#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTFIO_DIR()              bfin_read16(PORTFIO_DIR)
+#define bfin_write_PORTFIO_DIR(val)          bfin_write16(PORTFIO_DIR,val)
+#define bfin_read_PORTFIO_POLAR()            bfin_read16(PORTFIO_POLAR)
+#define bfin_write_PORTFIO_POLAR(val)        bfin_write16(PORTFIO_POLAR,val)
+#define bfin_read_PORTFIO_EDGE()             bfin_read16(PORTFIO_EDGE)
+#define bfin_write_PORTFIO_EDGE(val)         bfin_write16(PORTFIO_EDGE,val)
+#define bfin_read_PORTFIO_BOTH()             bfin_read16(PORTFIO_BOTH)
+#define bfin_write_PORTFIO_BOTH(val)         bfin_write16(PORTFIO_BOTH,val)
+#define bfin_read_PORTFIO_INEN()             bfin_read16(PORTFIO_INEN)
+#define bfin_write_PORTFIO_INEN(val)         bfin_write16(PORTFIO_INEN,val)
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)								*/
+#define bfin_read_SPORT0_TCR1()              bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)          bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2()              bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)          bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV()           bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)       bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV()            bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)        bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX()                bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)            bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX()                bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)            bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32()              bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)          bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32()              bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)          bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16()              bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)          bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16()              bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)          bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1()              bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)          bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2()              bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)          bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV()           bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)       bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV()            bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)        bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT()              bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)          bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL()              bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)          bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1()             bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)         bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2()             bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)         bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0()             bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)         bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1()             bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)         bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2()             bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)         bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3()             bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)         bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0()             bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)         bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1()             bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)         bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2()             bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)         bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3()             bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)         bfin_write32(SPORT0_MRCS3,val)
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)								*/
+#define bfin_read_SPORT1_TCR1()              bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)          bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2()              bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)          bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV()           bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)       bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV()            bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)        bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX()                bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)            bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX()                bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)            bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32()              bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)          bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32()              bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)          bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16()              bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)          bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16()              bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)          bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1()              bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)          bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2()              bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)          bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV()           bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)       bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV()            bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)        bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT()              bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)          bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL()              bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)          bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1()             bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)         bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2()             bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)         bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0()             bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)         bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1()             bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)         bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2()             bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)         bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3()             bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)         bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0()             bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)         bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1()             bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)         bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2()             bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)         bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3()             bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)         bfin_write32(SPORT1_MRCS3,val)
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)							*/
+#define bfin_read_EBIU_AMGCTL()              bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)          bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0()             bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)         bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1()             bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)         bfin_write32(EBIU_AMBCTL1,val)
+#define bfin_read_EBIU_SDGCTL()              bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)          bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDBCTL()              bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)          bfin_write16(EBIU_SDBCTL,val)
+#define bfin_read_EBIU_SDRRC()               bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)           bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT()              bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)          bfin_write16(EBIU_SDSTAT,val)
+
+/* DMA Traffic Control Registers													*/
+#define bfin_read_DMA_TC_PER()                bfin_read16(DMA_TC_PER)
+#define bfin_write_DMA_TC_PER(val)            bfin_write16(DMA_TC_PER,val)
+#define bfin_read_DMA_TC_CNT()                bfin_read16(DMA_TC_CNT)
+#define bfin_write_DMA_TC_CNT(val)            bfin_write16(DMA_TC_CNT,val)
+
+/* Alternate deprecated register names (below) provided for backwards code compatibility */
+#define bfin_read_DMA_TCPER()                bfin_read16(DMA_TCPER)
+#define bfin_write_DMA_TCPER(val)            bfin_write16(DMA_TCPER,val)
+#define bfin_read_DMA_TCCNT()                bfin_read16(DMA_TCCNT)
+#define bfin_write_DMA_TCCNT(val)            bfin_write16(DMA_TCCNT,val)
+
+/* DMA Controller																	*/
+#define bfin_read_DMA0_CONFIG()              bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)          bfin_write16(DMA0_CONFIG,val)
+#define bfin_read_DMA0_NEXT_DESC_PTR()       bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val)   bfin_write32(DMA0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA0_START_ADDR()          bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val)      bfin_write32(DMA0_START_ADDR,val)
+#define bfin_read_DMA0_X_COUNT()             bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)         bfin_write16(DMA0_X_COUNT,val)
+#define bfin_read_DMA0_Y_COUNT()             bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)         bfin_write16(DMA0_Y_COUNT,val)
+#define bfin_read_DMA0_X_MODIFY()            bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)        bfin_write16(DMA0_X_MODIFY,val)
+#define bfin_read_DMA0_Y_MODIFY()            bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)        bfin_write16(DMA0_Y_MODIFY,val)
+#define bfin_read_DMA0_CURR_DESC_PTR()       bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val)   bfin_write32(DMA0_CURR_DESC_PTR,val)
+#define bfin_read_DMA0_CURR_ADDR()           bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val)       bfin_write32(DMA0_CURR_ADDR,val)
+#define bfin_read_DMA0_CURR_X_COUNT()        bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)    bfin_write16(DMA0_CURR_X_COUNT,val)
+#define bfin_read_DMA0_CURR_Y_COUNT()        bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)    bfin_write16(DMA0_CURR_Y_COUNT,val)
+#define bfin_read_DMA0_IRQ_STATUS()          bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)      bfin_write16(DMA0_IRQ_STATUS,val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()      bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)  bfin_write16(DMA0_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA1_CONFIG()              bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)          bfin_write16(DMA1_CONFIG,val)
+#define bfin_read_DMA1_NEXT_DESC_PTR()       bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val)   bfin_write32(DMA1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_START_ADDR()          bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val)      bfin_write32(DMA1_START_ADDR,val)
+#define bfin_read_DMA1_X_COUNT()             bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)         bfin_write16(DMA1_X_COUNT,val)
+#define bfin_read_DMA1_Y_COUNT()             bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)         bfin_write16(DMA1_Y_COUNT,val)
+#define bfin_read_DMA1_X_MODIFY()            bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)        bfin_write16(DMA1_X_MODIFY,val)
+#define bfin_read_DMA1_Y_MODIFY()            bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)        bfin_write16(DMA1_Y_MODIFY,val)
+#define bfin_read_DMA1_CURR_DESC_PTR()       bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val)   bfin_write32(DMA1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_CURR_ADDR()           bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val)       bfin_write32(DMA1_CURR_ADDR,val)
+#define bfin_read_DMA1_CURR_X_COUNT()        bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)    bfin_write16(DMA1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_CURR_Y_COUNT()        bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)    bfin_write16(DMA1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_IRQ_STATUS()          bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)      bfin_write16(DMA1_IRQ_STATUS,val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()      bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)  bfin_write16(DMA1_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA2_CONFIG()              bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)          bfin_write16(DMA2_CONFIG,val)
+#define bfin_read_DMA2_NEXT_DESC_PTR()       bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val)   bfin_write32(DMA2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_START_ADDR()          bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val)      bfin_write32(DMA2_START_ADDR,val)
+#define bfin_read_DMA2_X_COUNT()             bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)         bfin_write16(DMA2_X_COUNT,val)
+#define bfin_read_DMA2_Y_COUNT()             bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)         bfin_write16(DMA2_Y_COUNT,val)
+#define bfin_read_DMA2_X_MODIFY()            bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)        bfin_write16(DMA2_X_MODIFY,val)
+#define bfin_read_DMA2_Y_MODIFY()            bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)        bfin_write16(DMA2_Y_MODIFY,val)
+#define bfin_read_DMA2_CURR_DESC_PTR()       bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val)   bfin_write32(DMA2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_CURR_ADDR()           bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val)       bfin_write32(DMA2_CURR_ADDR,val)
+#define bfin_read_DMA2_CURR_X_COUNT()        bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)    bfin_write16(DMA2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_CURR_Y_COUNT()        bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)    bfin_write16(DMA2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_IRQ_STATUS()          bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)      bfin_write16(DMA2_IRQ_STATUS,val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()      bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)  bfin_write16(DMA2_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA3_CONFIG()              bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)          bfin_write16(DMA3_CONFIG,val)
+#define bfin_read_DMA3_NEXT_DESC_PTR()       bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val)   bfin_write32(DMA3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA3_START_ADDR()          bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val)      bfin_write32(DMA3_START_ADDR,val)
+#define bfin_read_DMA3_X_COUNT()             bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)         bfin_write16(DMA3_X_COUNT,val)
+#define bfin_read_DMA3_Y_COUNT()             bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)         bfin_write16(DMA3_Y_COUNT,val)
+#define bfin_read_DMA3_X_MODIFY()            bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)        bfin_write16(DMA3_X_MODIFY,val)
+#define bfin_read_DMA3_Y_MODIFY()            bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)        bfin_write16(DMA3_Y_MODIFY,val)
+#define bfin_read_DMA3_CURR_DESC_PTR()       bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val)   bfin_write32(DMA3_CURR_DESC_PTR,val)
+#define bfin_read_DMA3_CURR_ADDR()           bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val)       bfin_write32(DMA3_CURR_ADDR,val)
+#define bfin_read_DMA3_CURR_X_COUNT()        bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)    bfin_write16(DMA3_CURR_X_COUNT,val)
+#define bfin_read_DMA3_CURR_Y_COUNT()        bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)    bfin_write16(DMA3_CURR_Y_COUNT,val)
+#define bfin_read_DMA3_IRQ_STATUS()          bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)      bfin_write16(DMA3_IRQ_STATUS,val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()      bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)  bfin_write16(DMA3_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA4_CONFIG()              bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)          bfin_write16(DMA4_CONFIG,val)
+#define bfin_read_DMA4_NEXT_DESC_PTR()       bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val)   bfin_write32(DMA4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA4_START_ADDR()          bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val)      bfin_write32(DMA4_START_ADDR,val)
+#define bfin_read_DMA4_X_COUNT()             bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)         bfin_write16(DMA4_X_COUNT,val)
+#define bfin_read_DMA4_Y_COUNT()             bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)         bfin_write16(DMA4_Y_COUNT,val)
+#define bfin_read_DMA4_X_MODIFY()            bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)        bfin_write16(DMA4_X_MODIFY,val)
+#define bfin_read_DMA4_Y_MODIFY()            bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)        bfin_write16(DMA4_Y_MODIFY,val)
+#define bfin_read_DMA4_CURR_DESC_PTR()       bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val)   bfin_write32(DMA4_CURR_DESC_PTR,val)
+#define bfin_read_DMA4_CURR_ADDR()           bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val)       bfin_write32(DMA4_CURR_ADDR,val)
+#define bfin_read_DMA4_CURR_X_COUNT()        bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)    bfin_write16(DMA4_CURR_X_COUNT,val)
+#define bfin_read_DMA4_CURR_Y_COUNT()        bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)    bfin_write16(DMA4_CURR_Y_COUNT,val)
+#define bfin_read_DMA4_IRQ_STATUS()          bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)      bfin_write16(DMA4_IRQ_STATUS,val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()      bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)  bfin_write16(DMA4_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA5_CONFIG()              bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)          bfin_write16(DMA5_CONFIG,val)
+#define bfin_read_DMA5_NEXT_DESC_PTR()       bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val)   bfin_write32(DMA5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA5_START_ADDR()          bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val)      bfin_write32(DMA5_START_ADDR,val)
+#define bfin_read_DMA5_X_COUNT()             bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)         bfin_write16(DMA5_X_COUNT,val)
+#define bfin_read_DMA5_Y_COUNT()             bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)         bfin_write16(DMA5_Y_COUNT,val)
+#define bfin_read_DMA5_X_MODIFY()            bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)        bfin_write16(DMA5_X_MODIFY,val)
+#define bfin_read_DMA5_Y_MODIFY()            bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)        bfin_write16(DMA5_Y_MODIFY,val)
+#define bfin_read_DMA5_CURR_DESC_PTR()       bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val)   bfin_write32(DMA5_CURR_DESC_PTR,val)
+#define bfin_read_DMA5_CURR_ADDR()           bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val)       bfin_write32(DMA5_CURR_ADDR,val)
+#define bfin_read_DMA5_CURR_X_COUNT()        bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)    bfin_write16(DMA5_CURR_X_COUNT,val)
+#define bfin_read_DMA5_CURR_Y_COUNT()        bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)    bfin_write16(DMA5_CURR_Y_COUNT,val)
+#define bfin_read_DMA5_IRQ_STATUS()          bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)      bfin_write16(DMA5_IRQ_STATUS,val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()      bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)  bfin_write16(DMA5_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA6_CONFIG()              bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)          bfin_write16(DMA6_CONFIG,val)
+#define bfin_read_DMA6_NEXT_DESC_PTR()       bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val)   bfin_write32(DMA6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA6_START_ADDR()          bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val)      bfin_write32(DMA6_START_ADDR,val)
+#define bfin_read_DMA6_X_COUNT()             bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)         bfin_write16(DMA6_X_COUNT,val)
+#define bfin_read_DMA6_Y_COUNT()             bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)         bfin_write16(DMA6_Y_COUNT,val)
+#define bfin_read_DMA6_X_MODIFY()            bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)        bfin_write16(DMA6_X_MODIFY,val)
+#define bfin_read_DMA6_Y_MODIFY()            bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)        bfin_write16(DMA6_Y_MODIFY,val)
+#define bfin_read_DMA6_CURR_DESC_PTR()       bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val)   bfin_write32(DMA6_CURR_DESC_PTR,val)
+#define bfin_read_DMA6_CURR_ADDR()           bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val)       bfin_write32(DMA6_CURR_ADDR,val)
+#define bfin_read_DMA6_CURR_X_COUNT()        bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)    bfin_write16(DMA6_CURR_X_COUNT,val)
+#define bfin_read_DMA6_CURR_Y_COUNT()        bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)    bfin_write16(DMA6_CURR_Y_COUNT,val)
+#define bfin_read_DMA6_IRQ_STATUS()          bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)      bfin_write16(DMA6_IRQ_STATUS,val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()      bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)  bfin_write16(DMA6_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA7_CONFIG()              bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)          bfin_write16(DMA7_CONFIG,val)
+#define bfin_read_DMA7_NEXT_DESC_PTR()       bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val)   bfin_write32(DMA7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA7_START_ADDR()          bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val)      bfin_write32(DMA7_START_ADDR,val)
+#define bfin_read_DMA7_X_COUNT()             bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)         bfin_write16(DMA7_X_COUNT,val)
+#define bfin_read_DMA7_Y_COUNT()             bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)         bfin_write16(DMA7_Y_COUNT,val)
+#define bfin_read_DMA7_X_MODIFY()            bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)        bfin_write16(DMA7_X_MODIFY,val)
+#define bfin_read_DMA7_Y_MODIFY()            bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)        bfin_write16(DMA7_Y_MODIFY,val)
+#define bfin_read_DMA7_CURR_DESC_PTR()       bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val)   bfin_write32(DMA7_CURR_DESC_PTR,val)
+#define bfin_read_DMA7_CURR_ADDR()           bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val)       bfin_write32(DMA7_CURR_ADDR,val)
+#define bfin_read_DMA7_CURR_X_COUNT()        bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)    bfin_write16(DMA7_CURR_X_COUNT,val)
+#define bfin_read_DMA7_CURR_Y_COUNT()        bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)    bfin_write16(DMA7_CURR_Y_COUNT,val)
+#define bfin_read_DMA7_IRQ_STATUS()          bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)      bfin_write16(DMA7_IRQ_STATUS,val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()      bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)  bfin_write16(DMA7_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA8_CONFIG()              bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)          bfin_write16(DMA8_CONFIG,val)
+#define bfin_read_DMA8_NEXT_DESC_PTR()       bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val)   bfin_write32(DMA8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA8_START_ADDR()          bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val)      bfin_write32(DMA8_START_ADDR,val)
+#define bfin_read_DMA8_X_COUNT()             bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)         bfin_write16(DMA8_X_COUNT,val)
+#define bfin_read_DMA8_Y_COUNT()             bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)         bfin_write16(DMA8_Y_COUNT,val)
+#define bfin_read_DMA8_X_MODIFY()            bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val)        bfin_write16(DMA8_X_MODIFY,val)
+#define bfin_read_DMA8_Y_MODIFY()            bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val)        bfin_write16(DMA8_Y_MODIFY,val)
+#define bfin_read_DMA8_CURR_DESC_PTR()       bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val)   bfin_write32(DMA8_CURR_DESC_PTR,val)
+#define bfin_read_DMA8_CURR_ADDR()           bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val)       bfin_write32(DMA8_CURR_ADDR,val)
+#define bfin_read_DMA8_CURR_X_COUNT()        bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val)    bfin_write16(DMA8_CURR_X_COUNT,val)
+#define bfin_read_DMA8_CURR_Y_COUNT()        bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val)    bfin_write16(DMA8_CURR_Y_COUNT,val)
+#define bfin_read_DMA8_IRQ_STATUS()          bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val)      bfin_write16(DMA8_IRQ_STATUS,val)
+#define bfin_read_DMA8_PERIPHERAL_MAP()      bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val)  bfin_write16(DMA8_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA9_CONFIG()              bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)          bfin_write16(DMA9_CONFIG,val)
+#define bfin_read_DMA9_NEXT_DESC_PTR()       bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val)   bfin_write32(DMA9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA9_START_ADDR()          bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val)      bfin_write32(DMA9_START_ADDR,val)
+#define bfin_read_DMA9_X_COUNT()             bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)         bfin_write16(DMA9_X_COUNT,val)
+#define bfin_read_DMA9_Y_COUNT()             bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)         bfin_write16(DMA9_Y_COUNT,val)
+#define bfin_read_DMA9_X_MODIFY()            bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val)        bfin_write16(DMA9_X_MODIFY,val)
+#define bfin_read_DMA9_Y_MODIFY()            bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val)        bfin_write16(DMA9_Y_MODIFY,val)
+#define bfin_read_DMA9_CURR_DESC_PTR()       bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val)   bfin_write32(DMA9_CURR_DESC_PTR,val)
+#define bfin_read_DMA9_CURR_ADDR()           bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val)       bfin_write32(DMA9_CURR_ADDR,val)
+#define bfin_read_DMA9_CURR_X_COUNT()        bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val)    bfin_write16(DMA9_CURR_X_COUNT,val)
+#define bfin_read_DMA9_CURR_Y_COUNT()        bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val)    bfin_write16(DMA9_CURR_Y_COUNT,val)
+#define bfin_read_DMA9_IRQ_STATUS()          bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val)      bfin_write16(DMA9_IRQ_STATUS,val)
+#define bfin_read_DMA9_PERIPHERAL_MAP()      bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val)  bfin_write16(DMA9_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA10_CONFIG()             bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)         bfin_write16(DMA10_CONFIG,val)
+#define bfin_read_DMA10_NEXT_DESC_PTR()      bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val)  bfin_write32(DMA10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA10_START_ADDR()         bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val)     bfin_write32(DMA10_START_ADDR,val)
+#define bfin_read_DMA10_X_COUNT()            bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)        bfin_write16(DMA10_X_COUNT,val)
+#define bfin_read_DMA10_Y_COUNT()            bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)        bfin_write16(DMA10_Y_COUNT,val)
+#define bfin_read_DMA10_X_MODIFY()           bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val)       bfin_write16(DMA10_X_MODIFY,val)
+#define bfin_read_DMA10_Y_MODIFY()           bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val)       bfin_write16(DMA10_Y_MODIFY,val)
+#define bfin_read_DMA10_CURR_DESC_PTR()      bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val)  bfin_write32(DMA10_CURR_DESC_PTR,val)
+#define bfin_read_DMA10_CURR_ADDR()          bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val)      bfin_write32(DMA10_CURR_ADDR,val)
+#define bfin_read_DMA10_CURR_X_COUNT()       bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val)   bfin_write16(DMA10_CURR_X_COUNT,val)
+#define bfin_read_DMA10_CURR_Y_COUNT()       bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val)   bfin_write16(DMA10_CURR_Y_COUNT,val)
+#define bfin_read_DMA10_IRQ_STATUS()         bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val)     bfin_write16(DMA10_IRQ_STATUS,val)
+#define bfin_read_DMA10_PERIPHERAL_MAP()     bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA11_CONFIG()             bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)         bfin_write16(DMA11_CONFIG,val)
+#define bfin_read_DMA11_NEXT_DESC_PTR()      bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val)  bfin_write32(DMA11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA11_START_ADDR()         bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val)     bfin_write32(DMA11_START_ADDR,val)
+#define bfin_read_DMA11_X_COUNT()            bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)        bfin_write16(DMA11_X_COUNT,val)
+#define bfin_read_DMA11_Y_COUNT()            bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)        bfin_write16(DMA11_Y_COUNT,val)
+#define bfin_read_DMA11_X_MODIFY()           bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val)       bfin_write16(DMA11_X_MODIFY,val)
+#define bfin_read_DMA11_Y_MODIFY()           bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val)       bfin_write16(DMA11_Y_MODIFY,val)
+#define bfin_read_DMA11_CURR_DESC_PTR()      bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val)  bfin_write32(DMA11_CURR_DESC_PTR,val)
+#define bfin_read_DMA11_CURR_ADDR()          bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val)      bfin_write32(DMA11_CURR_ADDR,val)
+#define bfin_read_DMA11_CURR_X_COUNT()       bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val)   bfin_write16(DMA11_CURR_X_COUNT,val)
+#define bfin_read_DMA11_CURR_Y_COUNT()       bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val)   bfin_write16(DMA11_CURR_Y_COUNT,val)
+#define bfin_read_DMA11_IRQ_STATUS()         bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val)     bfin_write16(DMA11_IRQ_STATUS,val)
+#define bfin_read_DMA11_PERIPHERAL_MAP()     bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D0_CONFIG()           bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)       bfin_write16(MDMA_D0_CONFIG,val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()    bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D0_START_ADDR()       bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)   bfin_write32(MDMA_D0_START_ADDR,val)
+#define bfin_read_MDMA_D0_X_COUNT()          bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)      bfin_write16(MDMA_D0_X_COUNT,val)
+#define bfin_read_MDMA_D0_Y_COUNT()          bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)      bfin_write16(MDMA_D0_Y_COUNT,val)
+#define bfin_read_MDMA_D0_X_MODIFY()         bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)     bfin_write16(MDMA_D0_X_MODIFY,val)
+#define bfin_read_MDMA_D0_Y_MODIFY()         bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)     bfin_write16(MDMA_D0_Y_MODIFY,val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()    bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D0_CURR_ADDR()        bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)    bfin_write32(MDMA_D0_CURR_ADDR,val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()     bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()     bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()       bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)   bfin_write16(MDMA_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()   bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S0_CONFIG()           bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)       bfin_write16(MDMA_S0_CONFIG,val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()    bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S0_START_ADDR()       bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)   bfin_write32(MDMA_S0_START_ADDR,val)
+#define bfin_read_MDMA_S0_X_COUNT()          bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)      bfin_write16(MDMA_S0_X_COUNT,val)
+#define bfin_read_MDMA_S0_Y_COUNT()          bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)      bfin_write16(MDMA_S0_Y_COUNT,val)
+#define bfin_read_MDMA_S0_X_MODIFY()         bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)     bfin_write16(MDMA_S0_X_MODIFY,val)
+#define bfin_read_MDMA_S0_Y_MODIFY()         bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)     bfin_write16(MDMA_S0_Y_MODIFY,val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()    bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S0_CURR_ADDR()        bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)    bfin_write32(MDMA_S0_CURR_ADDR,val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()     bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()     bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()       bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)   bfin_write16(MDMA_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()   bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D1_CONFIG()           bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)       bfin_write16(MDMA_D1_CONFIG,val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()    bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D1_START_ADDR()       bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)   bfin_write32(MDMA_D1_START_ADDR,val)
+#define bfin_read_MDMA_D1_X_COUNT()          bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)      bfin_write16(MDMA_D1_X_COUNT,val)
+#define bfin_read_MDMA_D1_Y_COUNT()          bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)      bfin_write16(MDMA_D1_Y_COUNT,val)
+#define bfin_read_MDMA_D1_X_MODIFY()         bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)     bfin_write16(MDMA_D1_X_MODIFY,val)
+#define bfin_read_MDMA_D1_Y_MODIFY()         bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)     bfin_write16(MDMA_D1_Y_MODIFY,val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()    bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D1_CURR_ADDR()        bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)    bfin_write32(MDMA_D1_CURR_ADDR,val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()     bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()     bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()       bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)   bfin_write16(MDMA_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()   bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S1_CONFIG()           bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)       bfin_write16(MDMA_S1_CONFIG,val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()    bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S1_START_ADDR()       bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)   bfin_write32(MDMA_S1_START_ADDR,val)
+#define bfin_read_MDMA_S1_X_COUNT()          bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)      bfin_write16(MDMA_S1_X_COUNT,val)
+#define bfin_read_MDMA_S1_Y_COUNT()          bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)      bfin_write16(MDMA_S1_Y_COUNT,val)
+#define bfin_read_MDMA_S1_X_MODIFY()         bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)     bfin_write16(MDMA_S1_X_MODIFY,val)
+#define bfin_read_MDMA_S1_Y_MODIFY()         bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)     bfin_write16(MDMA_S1_Y_MODIFY,val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()    bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S1_CURR_ADDR()        bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)    bfin_write32(MDMA_S1_CURR_ADDR,val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()     bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()     bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()       bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)   bfin_write16(MDMA_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()   bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)							*/
+#define bfin_read_PPI_CONTROL()              bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)          bfin_write16(PPI_CONTROL,val)
+#define bfin_read_PPI_STATUS()               bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)           bfin_write16(PPI_STATUS,val)
+#define bfin_clear_PPI_STATUS()              bfin_write_PPI_STATUS(0xFFFF)
+#define bfin_read_PPI_DELAY()                bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)            bfin_write16(PPI_DELAY,val)
+#define bfin_read_PPI_COUNT()                bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)            bfin_write16(PPI_COUNT,val)
+#define bfin_read_PPI_FRAME()                bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)            bfin_write16(PPI_FRAME,val)
+
+/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)								*/
+#define bfin_read_PORTGIO()                  bfin_read16(PORTGIO)
+#define bfin_write_PORTGIO(val)              bfin_write16(PORTGIO,val)
+#define bfin_read_PORTGIO_CLEAR()            bfin_read16(PORTGIO_CLEAR)
+#define bfin_write_PORTGIO_CLEAR(val)        bfin_write16(PORTGIO_CLEAR,val)
+#define bfin_read_PORTGIO_SET()              bfin_read16(PORTGIO_SET)
+#define bfin_write_PORTGIO_SET(val)          bfin_write16(PORTGIO_SET,val)
+#define bfin_read_PORTGIO_TOGGLE()           bfin_read16(PORTGIO_TOGGLE)
+#define bfin_write_PORTGIO_TOGGLE(val)       bfin_write16(PORTGIO_TOGGLE,val)
+#define bfin_read_PORTGIO_MASKA()            bfin_read16(PORTGIO_MASKA)
+#define bfin_write_PORTGIO_MASKA(val)        bfin_write16(PORTGIO_MASKA,val)
+#define bfin_read_PORTGIO_MASKA_CLEAR()      bfin_read16(PORTGIO_MASKA_CLEAR)
+#define bfin_write_PORTGIO_MASKA_CLEAR(val)  bfin_write16(PORTGIO_MASKA_CLEAR,val)
+#define bfin_read_PORTGIO_MASKA_SET()        bfin_read16(PORTGIO_MASKA_SET)
+#define bfin_write_PORTGIO_MASKA_SET(val)    bfin_write16(PORTGIO_MASKA_SET,val)
+#define bfin_read_PORTGIO_MASKA_TOGGLE()     bfin_read16(PORTGIO_MASKA_TOGGLE)
+#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTGIO_MASKB()            bfin_read16(PORTGIO_MASKB)
+#define bfin_write_PORTGIO_MASKB(val)        bfin_write16(PORTGIO_MASKB,val)
+#define bfin_read_PORTGIO_MASKB_CLEAR()      bfin_read16(PORTGIO_MASKB_CLEAR)
+#define bfin_write_PORTGIO_MASKB_CLEAR(val)  bfin_write16(PORTGIO_MASKB_CLEAR,val)
+#define bfin_read_PORTGIO_MASKB_SET()        bfin_read16(PORTGIO_MASKB_SET)
+#define bfin_write_PORTGIO_MASKB_SET(val)    bfin_write16(PORTGIO_MASKB_SET,val)
+#define bfin_read_PORTGIO_MASKB_TOGGLE()     bfin_read16(PORTGIO_MASKB_TOGGLE)
+#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTGIO_DIR()              bfin_read16(PORTGIO_DIR)
+#define bfin_write_PORTGIO_DIR(val)          bfin_write16(PORTGIO_DIR,val)
+#define bfin_read_PORTGIO_POLAR()            bfin_read16(PORTGIO_POLAR)
+#define bfin_write_PORTGIO_POLAR(val)        bfin_write16(PORTGIO_POLAR,val)
+#define bfin_read_PORTGIO_EDGE()             bfin_read16(PORTGIO_EDGE)
+#define bfin_write_PORTGIO_EDGE(val)         bfin_write16(PORTGIO_EDGE,val)
+#define bfin_read_PORTGIO_BOTH()             bfin_read16(PORTGIO_BOTH)
+#define bfin_write_PORTGIO_BOTH(val)         bfin_write16(PORTGIO_BOTH,val)
+#define bfin_read_PORTGIO_INEN()             bfin_read16(PORTGIO_INEN)
+#define bfin_write_PORTGIO_INEN(val)         bfin_write16(PORTGIO_INEN,val)
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)								*/
+#define bfin_read_PORTHIO()                  bfin_read16(PORTHIO)
+#define bfin_write_PORTHIO(val)              bfin_write16(PORTHIO,val)
+#define bfin_read_PORTHIO_CLEAR()            bfin_read16(PORTHIO_CLEAR)
+#define bfin_write_PORTHIO_CLEAR(val)        bfin_write16(PORTHIO_CLEAR,val)
+#define bfin_read_PORTHIO_SET()              bfin_read16(PORTHIO_SET)
+#define bfin_write_PORTHIO_SET(val)          bfin_write16(PORTHIO_SET,val)
+#define bfin_read_PORTHIO_TOGGLE()           bfin_read16(PORTHIO_TOGGLE)
+#define bfin_write_PORTHIO_TOGGLE(val)       bfin_write16(PORTHIO_TOGGLE,val)
+#define bfin_read_PORTHIO_MASKA()            bfin_read16(PORTHIO_MASKA)
+#define bfin_write_PORTHIO_MASKA(val)        bfin_write16(PORTHIO_MASKA,val)
+#define bfin_read_PORTHIO_MASKA_CLEAR()      bfin_read16(PORTHIO_MASKA_CLEAR)
+#define bfin_write_PORTHIO_MASKA_CLEAR(val)  bfin_write16(PORTHIO_MASKA_CLEAR,val)
+#define bfin_read_PORTHIO_MASKA_SET()        bfin_read16(PORTHIO_MASKA_SET)
+#define bfin_write_PORTHIO_MASKA_SET(val)    bfin_write16(PORTHIO_MASKA_SET,val)
+#define bfin_read_PORTHIO_MASKA_TOGGLE()     bfin_read16(PORTHIO_MASKA_TOGGLE)
+#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE,val)
+#define bfin_read_PORTHIO_MASKB()            bfin_read16(PORTHIO_MASKB)
+#define bfin_write_PORTHIO_MASKB(val)        bfin_write16(PORTHIO_MASKB,val)
+#define bfin_read_PORTHIO_MASKB_CLEAR()      bfin_read16(PORTHIO_MASKB_CLEAR)
+#define bfin_write_PORTHIO_MASKB_CLEAR(val)  bfin_write16(PORTHIO_MASKB_CLEAR,val)
+#define bfin_read_PORTHIO_MASKB_SET()        bfin_read16(PORTHIO_MASKB_SET)
+#define bfin_write_PORTHIO_MASKB_SET(val)    bfin_write16(PORTHIO_MASKB_SET,val)
+#define bfin_read_PORTHIO_MASKB_TOGGLE()     bfin_read16(PORTHIO_MASKB_TOGGLE)
+#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE,val)
+#define bfin_read_PORTHIO_DIR()              bfin_read16(PORTHIO_DIR)
+#define bfin_write_PORTHIO_DIR(val)          bfin_write16(PORTHIO_DIR,val)
+#define bfin_read_PORTHIO_POLAR()            bfin_read16(PORTHIO_POLAR)
+#define bfin_write_PORTHIO_POLAR(val)        bfin_write16(PORTHIO_POLAR,val)
+#define bfin_read_PORTHIO_EDGE()             bfin_read16(PORTHIO_EDGE)
+#define bfin_write_PORTHIO_EDGE(val)         bfin_write16(PORTHIO_EDGE,val)
+#define bfin_read_PORTHIO_BOTH()             bfin_read16(PORTHIO_BOTH)
+#define bfin_write_PORTHIO_BOTH(val)         bfin_write16(PORTHIO_BOTH,val)
+#define bfin_read_PORTHIO_INEN()             bfin_read16(PORTHIO_INEN)
+#define bfin_write_PORTHIO_INEN(val)         bfin_write16(PORTHIO_INEN,val)
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define bfin_read_UART1_THR()                bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val)            bfin_write16(UART1_THR,val)
+#define bfin_read_UART1_RBR()                bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val)            bfin_write16(UART1_RBR,val)
+#define bfin_read_UART1_DLL()                bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val)            bfin_write16(UART1_DLL,val)
+#define bfin_read_UART1_IER()                bfin_read16(UART1_IER)
+#define bfin_write_UART1_IER(val)            bfin_write16(UART1_IER,val)
+#define bfin_read_UART1_DLH()                bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val)            bfin_write16(UART1_DLH,val)
+#define bfin_read_UART1_IIR()                bfin_read16(UART1_IIR)
+#define bfin_write_UART1_IIR(val)            bfin_write16(UART1_IIR,val)
+#define bfin_read_UART1_LCR()                bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val)            bfin_write16(UART1_LCR,val)
+#define bfin_read_UART1_MCR()                bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val)            bfin_write16(UART1_MCR,val)
+#define bfin_read_UART1_LSR()                bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val)            bfin_write16(UART1_LSR,val)
+#define bfin_read_UART1_MSR()                bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val)            bfin_write16(UART1_MSR,val)
+#define bfin_read_UART1_SCR()                bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val)            bfin_write16(UART1_SCR,val)
+#define bfin_read_UART1_GCTL()               bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)           bfin_write16(UART1_GCTL,val)
+
+/* CAN Controller		(0xFFC02A00 - 0xFFC02FFF)								*/
+/* For Mailboxes 0-15 */
+#define bfin_read_CAN_MC1()                  bfin_read16(CAN_MC1)
+#define bfin_write_CAN_MC1(val)              bfin_write16(CAN_MC1,val)
+#define bfin_read_CAN_MD1()                  bfin_read16(CAN_MD1)
+#define bfin_write_CAN_MD1(val)              bfin_write16(CAN_MD1,val)
+#define bfin_read_CAN_TRS1()                 bfin_read16(CAN_TRS1)
+#define bfin_write_CAN_TRS1(val)             bfin_write16(CAN_TRS1,val)
+#define bfin_read_CAN_TRR1()                 bfin_read16(CAN_TRR1)
+#define bfin_write_CAN_TRR1(val)             bfin_write16(CAN_TRR1,val)
+#define bfin_read_CAN_TA1()                  bfin_read16(CAN_TA1)
+#define bfin_write_CAN_TA1(val)              bfin_write16(CAN_TA1,val)
+#define bfin_read_CAN_AA1()                  bfin_read16(CAN_AA1)
+#define bfin_write_CAN_AA1(val)              bfin_write16(CAN_AA1,val)
+#define bfin_read_CAN_RMP1()                 bfin_read16(CAN_RMP1)
+#define bfin_write_CAN_RMP1(val)             bfin_write16(CAN_RMP1,val)
+#define bfin_read_CAN_RML1()                 bfin_read16(CAN_RML1)
+#define bfin_write_CAN_RML1(val)             bfin_write16(CAN_RML1,val)
+#define bfin_read_CAN_MBTIF1()               bfin_read16(CAN_MBTIF1)
+#define bfin_write_CAN_MBTIF1(val)           bfin_write16(CAN_MBTIF1,val)
+#define bfin_read_CAN_MBRIF1()               bfin_read16(CAN_MBRIF1)
+#define bfin_write_CAN_MBRIF1(val)           bfin_write16(CAN_MBRIF1,val)
+#define bfin_read_CAN_MBIM1()                bfin_read16(CAN_MBIM1)
+#define bfin_write_CAN_MBIM1(val)            bfin_write16(CAN_MBIM1,val)
+#define bfin_read_CAN_RFH1()                 bfin_read16(CAN_RFH1)
+#define bfin_write_CAN_RFH1(val)             bfin_write16(CAN_RFH1,val)
+#define bfin_read_CAN_OPSS1()                bfin_read16(CAN_OPSS1)
+#define bfin_write_CAN_OPSS1(val)            bfin_write16(CAN_OPSS1,val)
+
+/* For Mailboxes 16-31 */
+#define bfin_read_CAN_MC2()                  bfin_read16(CAN_MC2)
+#define bfin_write_CAN_MC2(val)              bfin_write16(CAN_MC2,val)
+#define bfin_read_CAN_MD2()                  bfin_read16(CAN_MD2)
+#define bfin_write_CAN_MD2(val)              bfin_write16(CAN_MD2,val)
+#define bfin_read_CAN_TRS2()                 bfin_read16(CAN_TRS2)
+#define bfin_write_CAN_TRS2(val)             bfin_write16(CAN_TRS2,val)
+#define bfin_read_CAN_TRR2()                 bfin_read16(CAN_TRR2)
+#define bfin_write_CAN_TRR2(val)             bfin_write16(CAN_TRR2,val)
+#define bfin_read_CAN_TA2()                  bfin_read16(CAN_TA2)
+#define bfin_write_CAN_TA2(val)              bfin_write16(CAN_TA2,val)
+#define bfin_read_CAN_AA2()                  bfin_read16(CAN_AA2)
+#define bfin_write_CAN_AA2(val)              bfin_write16(CAN_AA2,val)
+#define bfin_read_CAN_RMP2()                 bfin_read16(CAN_RMP2)
+#define bfin_write_CAN_RMP2(val)             bfin_write16(CAN_RMP2,val)
+#define bfin_read_CAN_RML2()                 bfin_read16(CAN_RML2)
+#define bfin_write_CAN_RML2(val)             bfin_write16(CAN_RML2,val)
+#define bfin_read_CAN_MBTIF2()               bfin_read16(CAN_MBTIF2)
+#define bfin_write_CAN_MBTIF2(val)           bfin_write16(CAN_MBTIF2,val)
+#define bfin_read_CAN_MBRIF2()               bfin_read16(CAN_MBRIF2)
+#define bfin_write_CAN_MBRIF2(val)           bfin_write16(CAN_MBRIF2,val)
+#define bfin_read_CAN_MBIM2()                bfin_read16(CAN_MBIM2)
+#define bfin_write_CAN_MBIM2(val)            bfin_write16(CAN_MBIM2,val)
+#define bfin_read_CAN_RFH2()                 bfin_read16(CAN_RFH2)
+#define bfin_write_CAN_RFH2(val)             bfin_write16(CAN_RFH2,val)
+#define bfin_read_CAN_OPSS2()                bfin_read16(CAN_OPSS2)
+#define bfin_write_CAN_OPSS2(val)            bfin_write16(CAN_OPSS2,val)
+
+#define bfin_read_CAN_CLOCK()                bfin_read16(CAN_CLOCK)
+#define bfin_write_CAN_CLOCK(val)            bfin_write16(CAN_CLOCK,val)
+#define bfin_read_CAN_TIMING()               bfin_read16(CAN_TIMING)
+#define bfin_write_CAN_TIMING(val)           bfin_write16(CAN_TIMING,val)
+#define bfin_read_CAN_DEBUG()                bfin_read16(CAN_DEBUG)
+#define bfin_write_CAN_DEBUG(val)            bfin_write16(CAN_DEBUG,val)
+#define bfin_read_CAN_STATUS()               bfin_read16(CAN_STATUS)
+#define bfin_write_CAN_STATUS(val)           bfin_write16(CAN_STATUS,val)
+#define bfin_read_CAN_CEC()                  bfin_read16(CAN_CEC)
+#define bfin_write_CAN_CEC(val)              bfin_write16(CAN_CEC,val)
+#define bfin_read_CAN_GIS()                  bfin_read16(CAN_GIS)
+#define bfin_write_CAN_GIS(val)              bfin_write16(CAN_GIS,val)
+#define bfin_read_CAN_GIM()                  bfin_read16(CAN_GIM)
+#define bfin_write_CAN_GIM(val)              bfin_write16(CAN_GIM,val)
+#define bfin_read_CAN_GIF()                  bfin_read16(CAN_GIF)
+#define bfin_write_CAN_GIF(val)              bfin_write16(CAN_GIF,val)
+#define bfin_read_CAN_CONTROL()              bfin_read16(CAN_CONTROL)
+#define bfin_write_CAN_CONTROL(val)          bfin_write16(CAN_CONTROL,val)
+#define bfin_read_CAN_INTR()                 bfin_read16(CAN_INTR)
+#define bfin_write_CAN_INTR(val)             bfin_write16(CAN_INTR,val)
+#define bfin_read_CAN_SFCMVER()              bfin_read16(CAN_SFCMVER)
+#define bfin_write_CAN_SFCMVER(val)          bfin_write16(CAN_SFCMVER,val)
+#define bfin_read_CAN_MBTD()                 bfin_read16(CAN_MBTD)
+#define bfin_write_CAN_MBTD(val)             bfin_write16(CAN_MBTD,val)
+#define bfin_read_CAN_EWR()                  bfin_read16(CAN_EWR)
+#define bfin_write_CAN_EWR(val)              bfin_write16(CAN_EWR,val)
+#define bfin_read_CAN_ESR()                  bfin_read16(CAN_ESR)
+#define bfin_write_CAN_ESR(val)              bfin_write16(CAN_ESR,val)
+#define bfin_read_CAN_UCREG()                bfin_read16(CAN_UCREG)
+#define bfin_write_CAN_UCREG(val)            bfin_write16(CAN_UCREG,val)
+#define bfin_read_CAN_UCCNT()                bfin_read16(CAN_UCCNT)
+#define bfin_write_CAN_UCCNT(val)            bfin_write16(CAN_UCCNT,val)
+#define bfin_read_CAN_UCRC()                 bfin_read16(CAN_UCRC)
+#define bfin_write_CAN_UCRC(val)             bfin_write16(CAN_UCRC,val)
+#define bfin_read_CAN_UCCNF()                bfin_read16(CAN_UCCNF)
+#define bfin_write_CAN_UCCNF(val)            bfin_write16(CAN_UCCNF,val)
+
+/* Mailbox Acceptance Masks */
+#define bfin_read_CAN_AM00L()                bfin_read16(CAN_AM00L)
+#define bfin_write_CAN_AM00L(val)            bfin_write16(CAN_AM00L,val)
+#define bfin_read_CAN_AM00H()                bfin_read16(CAN_AM00H)
+#define bfin_write_CAN_AM00H(val)            bfin_write16(CAN_AM00H,val)
+#define bfin_read_CAN_AM01L()                bfin_read16(CAN_AM01L)
+#define bfin_write_CAN_AM01L(val)            bfin_write16(CAN_AM01L,val)
+#define bfin_read_CAN_AM01H()                bfin_read16(CAN_AM01H)
+#define bfin_write_CAN_AM01H(val)            bfin_write16(CAN_AM01H,val)
+#define bfin_read_CAN_AM02L()                bfin_read16(CAN_AM02L)
+#define bfin_write_CAN_AM02L(val)            bfin_write16(CAN_AM02L,val)
+#define bfin_read_CAN_AM02H()                bfin_read16(CAN_AM02H)
+#define bfin_write_CAN_AM02H(val)            bfin_write16(CAN_AM02H,val)
+#define bfin_read_CAN_AM03L()                bfin_read16(CAN_AM03L)
+#define bfin_write_CAN_AM03L(val)            bfin_write16(CAN_AM03L,val)
+#define bfin_read_CAN_AM03H()                bfin_read16(CAN_AM03H)
+#define bfin_write_CAN_AM03H(val)            bfin_write16(CAN_AM03H,val)
+#define bfin_read_CAN_AM04L()                bfin_read16(CAN_AM04L)
+#define bfin_write_CAN_AM04L(val)            bfin_write16(CAN_AM04L,val)
+#define bfin_read_CAN_AM04H()                bfin_read16(CAN_AM04H)
+#define bfin_write_CAN_AM04H(val)            bfin_write16(CAN_AM04H,val)
+#define bfin_read_CAN_AM05L()                bfin_read16(CAN_AM05L)
+#define bfin_write_CAN_AM05L(val)            bfin_write16(CAN_AM05L,val)
+#define bfin_read_CAN_AM05H()                bfin_read16(CAN_AM05H)
+#define bfin_write_CAN_AM05H(val)            bfin_write16(CAN_AM05H,val)
+#define bfin_read_CAN_AM06L()                bfin_read16(CAN_AM06L)
+#define bfin_write_CAN_AM06L(val)            bfin_write16(CAN_AM06L,val)
+#define bfin_read_CAN_AM06H()                bfin_read16(CAN_AM06H)
+#define bfin_write_CAN_AM06H(val)            bfin_write16(CAN_AM06H,val)
+#define bfin_read_CAN_AM07L()                bfin_read16(CAN_AM07L)
+#define bfin_write_CAN_AM07L(val)            bfin_write16(CAN_AM07L,val)
+#define bfin_read_CAN_AM07H()                bfin_read16(CAN_AM07H)
+#define bfin_write_CAN_AM07H(val)            bfin_write16(CAN_AM07H,val)
+#define bfin_read_CAN_AM08L()                bfin_read16(CAN_AM08L)
+#define bfin_write_CAN_AM08L(val)            bfin_write16(CAN_AM08L,val)
+#define bfin_read_CAN_AM08H()                bfin_read16(CAN_AM08H)
+#define bfin_write_CAN_AM08H(val)            bfin_write16(CAN_AM08H,val)
+#define bfin_read_CAN_AM09L()                bfin_read16(CAN_AM09L)
+#define bfin_write_CAN_AM09L(val)            bfin_write16(CAN_AM09L,val)
+#define bfin_read_CAN_AM09H()                bfin_read16(CAN_AM09H)
+#define bfin_write_CAN_AM09H(val)            bfin_write16(CAN_AM09H,val)
+#define bfin_read_CAN_AM10L()                bfin_read16(CAN_AM10L)
+#define bfin_write_CAN_AM10L(val)            bfin_write16(CAN_AM10L,val)
+#define bfin_read_CAN_AM10H()                bfin_read16(CAN_AM10H)
+#define bfin_write_CAN_AM10H(val)            bfin_write16(CAN_AM10H,val)
+#define bfin_read_CAN_AM11L()                bfin_read16(CAN_AM11L)
+#define bfin_write_CAN_AM11L(val)            bfin_write16(CAN_AM11L,val)
+#define bfin_read_CAN_AM11H()                bfin_read16(CAN_AM11H)
+#define bfin_write_CAN_AM11H(val)            bfin_write16(CAN_AM11H,val)
+#define bfin_read_CAN_AM12L()                bfin_read16(CAN_AM12L)
+#define bfin_write_CAN_AM12L(val)            bfin_write16(CAN_AM12L,val)
+#define bfin_read_CAN_AM12H()                bfin_read16(CAN_AM12H)
+#define bfin_write_CAN_AM12H(val)            bfin_write16(CAN_AM12H,val)
+#define bfin_read_CAN_AM13L()                bfin_read16(CAN_AM13L)
+#define bfin_write_CAN_AM13L(val)            bfin_write16(CAN_AM13L,val)
+#define bfin_read_CAN_AM13H()                bfin_read16(CAN_AM13H)
+#define bfin_write_CAN_AM13H(val)            bfin_write16(CAN_AM13H,val)
+#define bfin_read_CAN_AM14L()                bfin_read16(CAN_AM14L)
+#define bfin_write_CAN_AM14L(val)            bfin_write16(CAN_AM14L,val)
+#define bfin_read_CAN_AM14H()                bfin_read16(CAN_AM14H)
+#define bfin_write_CAN_AM14H(val)            bfin_write16(CAN_AM14H,val)
+#define bfin_read_CAN_AM15L()                bfin_read16(CAN_AM15L)
+#define bfin_write_CAN_AM15L(val)            bfin_write16(CAN_AM15L,val)
+#define bfin_read_CAN_AM15H()                bfin_read16(CAN_AM15H)
+#define bfin_write_CAN_AM15H(val)            bfin_write16(CAN_AM15H,val)
+
+#define bfin_read_CAN_AM16L()                bfin_read16(CAN_AM16L)
+#define bfin_write_CAN_AM16L(val)            bfin_write16(CAN_AM16L,val)
+#define bfin_read_CAN_AM16H()                bfin_read16(CAN_AM16H)
+#define bfin_write_CAN_AM16H(val)            bfin_write16(CAN_AM16H,val)
+#define bfin_read_CAN_AM17L()                bfin_read16(CAN_AM17L)
+#define bfin_write_CAN_AM17L(val)            bfin_write16(CAN_AM17L,val)
+#define bfin_read_CAN_AM17H()                bfin_read16(CAN_AM17H)
+#define bfin_write_CAN_AM17H(val)            bfin_write16(CAN_AM17H,val)
+#define bfin_read_CAN_AM18L()                bfin_read16(CAN_AM18L)
+#define bfin_write_CAN_AM18L(val)            bfin_write16(CAN_AM18L,val)
+#define bfin_read_CAN_AM18H()                bfin_read16(CAN_AM18H)
+#define bfin_write_CAN_AM18H(val)            bfin_write16(CAN_AM18H,val)
+#define bfin_read_CAN_AM19L()                bfin_read16(CAN_AM19L)
+#define bfin_write_CAN_AM19L(val)            bfin_write16(CAN_AM19L,val)
+#define bfin_read_CAN_AM19H()                bfin_read16(CAN_AM19H)
+#define bfin_write_CAN_AM19H(val)            bfin_write16(CAN_AM19H,val)
+#define bfin_read_CAN_AM20L()                bfin_read16(CAN_AM20L)
+#define bfin_write_CAN_AM20L(val)            bfin_write16(CAN_AM20L,val)
+#define bfin_read_CAN_AM20H()                bfin_read16(CAN_AM20H)
+#define bfin_write_CAN_AM20H(val)            bfin_write16(CAN_AM20H,val)
+#define bfin_read_CAN_AM21L()                bfin_read16(CAN_AM21L)
+#define bfin_write_CAN_AM21L(val)            bfin_write16(CAN_AM21L,val)
+#define bfin_read_CAN_AM21H()                bfin_read16(CAN_AM21H)
+#define bfin_write_CAN_AM21H(val)            bfin_write16(CAN_AM21H,val)
+#define bfin_read_CAN_AM22L()                bfin_read16(CAN_AM22L)
+#define bfin_write_CAN_AM22L(val)            bfin_write16(CAN_AM22L,val)
+#define bfin_read_CAN_AM22H()                bfin_read16(CAN_AM22H)
+#define bfin_write_CAN_AM22H(val)            bfin_write16(CAN_AM22H,val)
+#define bfin_read_CAN_AM23L()                bfin_read16(CAN_AM23L)
+#define bfin_write_CAN_AM23L(val)            bfin_write16(CAN_AM23L,val)
+#define bfin_read_CAN_AM23H()                bfin_read16(CAN_AM23H)
+#define bfin_write_CAN_AM23H(val)            bfin_write16(CAN_AM23H,val)
+#define bfin_read_CAN_AM24L()                bfin_read16(CAN_AM24L)
+#define bfin_write_CAN_AM24L(val)            bfin_write16(CAN_AM24L,val)
+#define bfin_read_CAN_AM24H()                bfin_read16(CAN_AM24H)
+#define bfin_write_CAN_AM24H(val)            bfin_write16(CAN_AM24H,val)
+#define bfin_read_CAN_AM25L()                bfin_read16(CAN_AM25L)
+#define bfin_write_CAN_AM25L(val)            bfin_write16(CAN_AM25L,val)
+#define bfin_read_CAN_AM25H()                bfin_read16(CAN_AM25H)
+#define bfin_write_CAN_AM25H(val)            bfin_write16(CAN_AM25H,val)
+#define bfin_read_CAN_AM26L()                bfin_read16(CAN_AM26L)
+#define bfin_write_CAN_AM26L(val)            bfin_write16(CAN_AM26L,val)
+#define bfin_read_CAN_AM26H()                bfin_read16(CAN_AM26H)
+#define bfin_write_CAN_AM26H(val)            bfin_write16(CAN_AM26H,val)
+#define bfin_read_CAN_AM27L()                bfin_read16(CAN_AM27L)
+#define bfin_write_CAN_AM27L(val)            bfin_write16(CAN_AM27L,val)
+#define bfin_read_CAN_AM27H()                bfin_read16(CAN_AM27H)
+#define bfin_write_CAN_AM27H(val)            bfin_write16(CAN_AM27H,val)
+#define bfin_read_CAN_AM28L()                bfin_read16(CAN_AM28L)
+#define bfin_write_CAN_AM28L(val)            bfin_write16(CAN_AM28L,val)
+#define bfin_read_CAN_AM28H()                bfin_read16(CAN_AM28H)
+#define bfin_write_CAN_AM28H(val)            bfin_write16(CAN_AM28H,val)
+#define bfin_read_CAN_AM29L()                bfin_read16(CAN_AM29L)
+#define bfin_write_CAN_AM29L(val)            bfin_write16(CAN_AM29L,val)
+#define bfin_read_CAN_AM29H()                bfin_read16(CAN_AM29H)
+#define bfin_write_CAN_AM29H(val)            bfin_write16(CAN_AM29H,val)
+#define bfin_read_CAN_AM30L()                bfin_read16(CAN_AM30L)
+#define bfin_write_CAN_AM30L(val)            bfin_write16(CAN_AM30L,val)
+#define bfin_read_CAN_AM30H()                bfin_read16(CAN_AM30H)
+#define bfin_write_CAN_AM30H(val)            bfin_write16(CAN_AM30H,val)
+#define bfin_read_CAN_AM31L()                bfin_read16(CAN_AM31L)
+#define bfin_write_CAN_AM31L(val)            bfin_write16(CAN_AM31L,val)
+#define bfin_read_CAN_AM31H()                bfin_read16(CAN_AM31H)
+#define bfin_write_CAN_AM31H(val)            bfin_write16(CAN_AM31H,val)
+
+/* CAN Acceptance Mask Area Macros	*/
+#define bfin_read_CAN_AM_L(x)()              bfin_read16(CAN_AM_L(x))
+#define bfin_write_CAN_AM_L(x)(val)          bfin_write16(CAN_AM_L(x),val)
+#define bfin_read_CAN_AM_H(x)()              bfin_read16(CAN_AM_H(x))
+#define bfin_write_CAN_AM_H(x)(val)          bfin_write16(CAN_AM_H(x),val)
+
+/* Mailbox Registers */
+#define bfin_read_CAN_MB00_ID1()             bfin_read16(CAN_MB00_ID1)
+#define bfin_write_CAN_MB00_ID1(val)         bfin_write16(CAN_MB00_ID1,val)
+#define bfin_read_CAN_MB00_ID0()             bfin_read16(CAN_MB00_ID0)
+#define bfin_write_CAN_MB00_ID0(val)         bfin_write16(CAN_MB00_ID0,val)
+#define bfin_read_CAN_MB00_TIMESTAMP()       bfin_read16(CAN_MB00_TIMESTAMP)
+#define bfin_write_CAN_MB00_TIMESTAMP(val)   bfin_write16(CAN_MB00_TIMESTAMP,val)
+#define bfin_read_CAN_MB00_LENGTH()          bfin_read16(CAN_MB00_LENGTH)
+#define bfin_write_CAN_MB00_LENGTH(val)      bfin_write16(CAN_MB00_LENGTH,val)
+#define bfin_read_CAN_MB00_DATA3()           bfin_read16(CAN_MB00_DATA3)
+#define bfin_write_CAN_MB00_DATA3(val)       bfin_write16(CAN_MB00_DATA3,val)
+#define bfin_read_CAN_MB00_DATA2()           bfin_read16(CAN_MB00_DATA2)
+#define bfin_write_CAN_MB00_DATA2(val)       bfin_write16(CAN_MB00_DATA2,val)
+#define bfin_read_CAN_MB00_DATA1()           bfin_read16(CAN_MB00_DATA1)
+#define bfin_write_CAN_MB00_DATA1(val)       bfin_write16(CAN_MB00_DATA1,val)
+#define bfin_read_CAN_MB00_DATA0()           bfin_read16(CAN_MB00_DATA0)
+#define bfin_write_CAN_MB00_DATA0(val)       bfin_write16(CAN_MB00_DATA0,val)
+
+#define bfin_read_CAN_MB01_ID1()             bfin_read16(CAN_MB01_ID1)
+#define bfin_write_CAN_MB01_ID1(val)         bfin_write16(CAN_MB01_ID1,val)
+#define bfin_read_CAN_MB01_ID0()             bfin_read16(CAN_MB01_ID0)
+#define bfin_write_CAN_MB01_ID0(val)         bfin_write16(CAN_MB01_ID0,val)
+#define bfin_read_CAN_MB01_TIMESTAMP()       bfin_read16(CAN_MB01_TIMESTAMP)
+#define bfin_write_CAN_MB01_TIMESTAMP(val)   bfin_write16(CAN_MB01_TIMESTAMP,val)
+#define bfin_read_CAN_MB01_LENGTH()          bfin_read16(CAN_MB01_LENGTH)
+#define bfin_write_CAN_MB01_LENGTH(val)      bfin_write16(CAN_MB01_LENGTH,val)
+#define bfin_read_CAN_MB01_DATA3()           bfin_read16(CAN_MB01_DATA3)
+#define bfin_write_CAN_MB01_DATA3(val)       bfin_write16(CAN_MB01_DATA3,val)
+#define bfin_read_CAN_MB01_DATA2()           bfin_read16(CAN_MB01_DATA2)
+#define bfin_write_CAN_MB01_DATA2(val)       bfin_write16(CAN_MB01_DATA2,val)
+#define bfin_read_CAN_MB01_DATA1()           bfin_read16(CAN_MB01_DATA1)
+#define bfin_write_CAN_MB01_DATA1(val)       bfin_write16(CAN_MB01_DATA1,val)
+#define bfin_read_CAN_MB01_DATA0()           bfin_read16(CAN_MB01_DATA0)
+#define bfin_write_CAN_MB01_DATA0(val)       bfin_write16(CAN_MB01_DATA0,val)
+
+#define bfin_read_CAN_MB02_ID1()             bfin_read16(CAN_MB02_ID1)
+#define bfin_write_CAN_MB02_ID1(val)         bfin_write16(CAN_MB02_ID1,val)
+#define bfin_read_CAN_MB02_ID0()             bfin_read16(CAN_MB02_ID0)
+#define bfin_write_CAN_MB02_ID0(val)         bfin_write16(CAN_MB02_ID0,val)
+#define bfin_read_CAN_MB02_TIMESTAMP()       bfin_read16(CAN_MB02_TIMESTAMP)
+#define bfin_write_CAN_MB02_TIMESTAMP(val)   bfin_write16(CAN_MB02_TIMESTAMP,val)
+#define bfin_read_CAN_MB02_LENGTH()          bfin_read16(CAN_MB02_LENGTH)
+#define bfin_write_CAN_MB02_LENGTH(val)      bfin_write16(CAN_MB02_LENGTH,val)
+#define bfin_read_CAN_MB02_DATA3()           bfin_read16(CAN_MB02_DATA3)
+#define bfin_write_CAN_MB02_DATA3(val)       bfin_write16(CAN_MB02_DATA3,val)
+#define bfin_read_CAN_MB02_DATA2()           bfin_read16(CAN_MB02_DATA2)
+#define bfin_write_CAN_MB02_DATA2(val)       bfin_write16(CAN_MB02_DATA2,val)
+#define bfin_read_CAN_MB02_DATA1()           bfin_read16(CAN_MB02_DATA1)
+#define bfin_write_CAN_MB02_DATA1(val)       bfin_write16(CAN_MB02_DATA1,val)
+#define bfin_read_CAN_MB02_DATA0()           bfin_read16(CAN_MB02_DATA0)
+#define bfin_write_CAN_MB02_DATA0(val)       bfin_write16(CAN_MB02_DATA0,val)
+
+#define bfin_read_CAN_MB03_ID1()             bfin_read16(CAN_MB03_ID1)
+#define bfin_write_CAN_MB03_ID1(val)         bfin_write16(CAN_MB03_ID1,val)
+#define bfin_read_CAN_MB03_ID0()             bfin_read16(CAN_MB03_ID0)
+#define bfin_write_CAN_MB03_ID0(val)         bfin_write16(CAN_MB03_ID0,val)
+#define bfin_read_CAN_MB03_TIMESTAMP()       bfin_read16(CAN_MB03_TIMESTAMP)
+#define bfin_write_CAN_MB03_TIMESTAMP(val)   bfin_write16(CAN_MB03_TIMESTAMP,val)
+#define bfin_read_CAN_MB03_LENGTH()          bfin_read16(CAN_MB03_LENGTH)
+#define bfin_write_CAN_MB03_LENGTH(val)      bfin_write16(CAN_MB03_LENGTH,val)
+#define bfin_read_CAN_MB03_DATA3()           bfin_read16(CAN_MB03_DATA3)
+#define bfin_write_CAN_MB03_DATA3(val)       bfin_write16(CAN_MB03_DATA3,val)
+#define bfin_read_CAN_MB03_DATA2()           bfin_read16(CAN_MB03_DATA2)
+#define bfin_write_CAN_MB03_DATA2(val)       bfin_write16(CAN_MB03_DATA2,val)
+#define bfin_read_CAN_MB03_DATA1()           bfin_read16(CAN_MB03_DATA1)
+#define bfin_write_CAN_MB03_DATA1(val)       bfin_write16(CAN_MB03_DATA1,val)
+#define bfin_read_CAN_MB03_DATA0()           bfin_read16(CAN_MB03_DATA0)
+#define bfin_write_CAN_MB03_DATA0(val)       bfin_write16(CAN_MB03_DATA0,val)
+
+#define bfin_read_CAN_MB04_ID1()             bfin_read16(CAN_MB04_ID1)
+#define bfin_write_CAN_MB04_ID1(val)         bfin_write16(CAN_MB04_ID1,val)
+#define bfin_read_CAN_MB04_ID0()             bfin_read16(CAN_MB04_ID0)
+#define bfin_write_CAN_MB04_ID0(val)         bfin_write16(CAN_MB04_ID0,val)
+#define bfin_read_CAN_MB04_TIMESTAMP()       bfin_read16(CAN_MB04_TIMESTAMP)
+#define bfin_write_CAN_MB04_TIMESTAMP(val)   bfin_write16(CAN_MB04_TIMESTAMP,val)
+#define bfin_read_CAN_MB04_LENGTH()          bfin_read16(CAN_MB04_LENGTH)
+#define bfin_write_CAN_MB04_LENGTH(val)      bfin_write16(CAN_MB04_LENGTH,val)
+#define bfin_read_CAN_MB04_DATA3()           bfin_read16(CAN_MB04_DATA3)
+#define bfin_write_CAN_MB04_DATA3(val)       bfin_write16(CAN_MB04_DATA3,val)
+#define bfin_read_CAN_MB04_DATA2()           bfin_read16(CAN_MB04_DATA2)
+#define bfin_write_CAN_MB04_DATA2(val)       bfin_write16(CAN_MB04_DATA2,val)
+#define bfin_read_CAN_MB04_DATA1()           bfin_read16(CAN_MB04_DATA1)
+#define bfin_write_CAN_MB04_DATA1(val)       bfin_write16(CAN_MB04_DATA1,val)
+#define bfin_read_CAN_MB04_DATA0()           bfin_read16(CAN_MB04_DATA0)
+#define bfin_write_CAN_MB04_DATA0(val)       bfin_write16(CAN_MB04_DATA0,val)
+
+#define bfin_read_CAN_MB05_ID1()             bfin_read16(CAN_MB05_ID1)
+#define bfin_write_CAN_MB05_ID1(val)         bfin_write16(CAN_MB05_ID1,val)
+#define bfin_read_CAN_MB05_ID0()             bfin_read16(CAN_MB05_ID0)
+#define bfin_write_CAN_MB05_ID0(val)         bfin_write16(CAN_MB05_ID0,val)
+#define bfin_read_CAN_MB05_TIMESTAMP()       bfin_read16(CAN_MB05_TIMESTAMP)
+#define bfin_write_CAN_MB05_TIMESTAMP(val)   bfin_write16(CAN_MB05_TIMESTAMP,val)
+#define bfin_read_CAN_MB05_LENGTH()          bfin_read16(CAN_MB05_LENGTH)
+#define bfin_write_CAN_MB05_LENGTH(val)      bfin_write16(CAN_MB05_LENGTH,val)
+#define bfin_read_CAN_MB05_DATA3()           bfin_read16(CAN_MB05_DATA3)
+#define bfin_write_CAN_MB05_DATA3(val)       bfin_write16(CAN_MB05_DATA3,val)
+#define bfin_read_CAN_MB05_DATA2()           bfin_read16(CAN_MB05_DATA2)
+#define bfin_write_CAN_MB05_DATA2(val)       bfin_write16(CAN_MB05_DATA2,val)
+#define bfin_read_CAN_MB05_DATA1()           bfin_read16(CAN_MB05_DATA1)
+#define bfin_write_CAN_MB05_DATA1(val)       bfin_write16(CAN_MB05_DATA1,val)
+#define bfin_read_CAN_MB05_DATA0()           bfin_read16(CAN_MB05_DATA0)
+#define bfin_write_CAN_MB05_DATA0(val)       bfin_write16(CAN_MB05_DATA0,val)
+
+#define bfin_read_CAN_MB06_ID1()             bfin_read16(CAN_MB06_ID1)
+#define bfin_write_CAN_MB06_ID1(val)         bfin_write16(CAN_MB06_ID1,val)
+#define bfin_read_CAN_MB06_ID0()             bfin_read16(CAN_MB06_ID0)
+#define bfin_write_CAN_MB06_ID0(val)         bfin_write16(CAN_MB06_ID0,val)
+#define bfin_read_CAN_MB06_TIMESTAMP()       bfin_read16(CAN_MB06_TIMESTAMP)
+#define bfin_write_CAN_MB06_TIMESTAMP(val)   bfin_write16(CAN_MB06_TIMESTAMP,val)
+#define bfin_read_CAN_MB06_LENGTH()          bfin_read16(CAN_MB06_LENGTH)
+#define bfin_write_CAN_MB06_LENGTH(val)      bfin_write16(CAN_MB06_LENGTH,val)
+#define bfin_read_CAN_MB06_DATA3()           bfin_read16(CAN_MB06_DATA3)
+#define bfin_write_CAN_MB06_DATA3(val)       bfin_write16(CAN_MB06_DATA3,val)
+#define bfin_read_CAN_MB06_DATA2()           bfin_read16(CAN_MB06_DATA2)
+#define bfin_write_CAN_MB06_DATA2(val)       bfin_write16(CAN_MB06_DATA2,val)
+#define bfin_read_CAN_MB06_DATA1()           bfin_read16(CAN_MB06_DATA1)
+#define bfin_write_CAN_MB06_DATA1(val)       bfin_write16(CAN_MB06_DATA1,val)
+#define bfin_read_CAN_MB06_DATA0()           bfin_read16(CAN_MB06_DATA0)
+#define bfin_write_CAN_MB06_DATA0(val)       bfin_write16(CAN_MB06_DATA0,val)
+
+#define bfin_read_CAN_MB07_ID1()             bfin_read16(CAN_MB07_ID1)
+#define bfin_write_CAN_MB07_ID1(val)         bfin_write16(CAN_MB07_ID1,val)
+#define bfin_read_CAN_MB07_ID0()             bfin_read16(CAN_MB07_ID0)
+#define bfin_write_CAN_MB07_ID0(val)         bfin_write16(CAN_MB07_ID0,val)
+#define bfin_read_CAN_MB07_TIMESTAMP()       bfin_read16(CAN_MB07_TIMESTAMP)
+#define bfin_write_CAN_MB07_TIMESTAMP(val)   bfin_write16(CAN_MB07_TIMESTAMP,val)
+#define bfin_read_CAN_MB07_LENGTH()          bfin_read16(CAN_MB07_LENGTH)
+#define bfin_write_CAN_MB07_LENGTH(val)      bfin_write16(CAN_MB07_LENGTH,val)
+#define bfin_read_CAN_MB07_DATA3()           bfin_read16(CAN_MB07_DATA3)
+#define bfin_write_CAN_MB07_DATA3(val)       bfin_write16(CAN_MB07_DATA3,val)
+#define bfin_read_CAN_MB07_DATA2()           bfin_read16(CAN_MB07_DATA2)
+#define bfin_write_CAN_MB07_DATA2(val)       bfin_write16(CAN_MB07_DATA2,val)
+#define bfin_read_CAN_MB07_DATA1()           bfin_read16(CAN_MB07_DATA1)
+#define bfin_write_CAN_MB07_DATA1(val)       bfin_write16(CAN_MB07_DATA1,val)
+#define bfin_read_CAN_MB07_DATA0()           bfin_read16(CAN_MB07_DATA0)
+#define bfin_write_CAN_MB07_DATA0(val)       bfin_write16(CAN_MB07_DATA0,val)
+
+#define bfin_read_CAN_MB08_ID1()             bfin_read16(CAN_MB08_ID1)
+#define bfin_write_CAN_MB08_ID1(val)         bfin_write16(CAN_MB08_ID1,val)
+#define bfin_read_CAN_MB08_ID0()             bfin_read16(CAN_MB08_ID0)
+#define bfin_write_CAN_MB08_ID0(val)         bfin_write16(CAN_MB08_ID0,val)
+#define bfin_read_CAN_MB08_TIMESTAMP()       bfin_read16(CAN_MB08_TIMESTAMP)
+#define bfin_write_CAN_MB08_TIMESTAMP(val)   bfin_write16(CAN_MB08_TIMESTAMP,val)
+#define bfin_read_CAN_MB08_LENGTH()          bfin_read16(CAN_MB08_LENGTH)
+#define bfin_write_CAN_MB08_LENGTH(val)      bfin_write16(CAN_MB08_LENGTH,val)
+#define bfin_read_CAN_MB08_DATA3()           bfin_read16(CAN_MB08_DATA3)
+#define bfin_write_CAN_MB08_DATA3(val)       bfin_write16(CAN_MB08_DATA3,val)
+#define bfin_read_CAN_MB08_DATA2()           bfin_read16(CAN_MB08_DATA2)
+#define bfin_write_CAN_MB08_DATA2(val)       bfin_write16(CAN_MB08_DATA2,val)
+#define bfin_read_CAN_MB08_DATA1()           bfin_read16(CAN_MB08_DATA1)
+#define bfin_write_CAN_MB08_DATA1(val)       bfin_write16(CAN_MB08_DATA1,val)
+#define bfin_read_CAN_MB08_DATA0()           bfin_read16(CAN_MB08_DATA0)
+#define bfin_write_CAN_MB08_DATA0(val)       bfin_write16(CAN_MB08_DATA0,val)
+
+#define bfin_read_CAN_MB09_ID1()             bfin_read16(CAN_MB09_ID1)
+#define bfin_write_CAN_MB09_ID1(val)         bfin_write16(CAN_MB09_ID1,val)
+#define bfin_read_CAN_MB09_ID0()             bfin_read16(CAN_MB09_ID0)
+#define bfin_write_CAN_MB09_ID0(val)         bfin_write16(CAN_MB09_ID0,val)
+#define bfin_read_CAN_MB09_TIMESTAMP()       bfin_read16(CAN_MB09_TIMESTAMP)
+#define bfin_write_CAN_MB09_TIMESTAMP(val)   bfin_write16(CAN_MB09_TIMESTAMP,val)
+#define bfin_read_CAN_MB09_LENGTH()          bfin_read16(CAN_MB09_LENGTH)
+#define bfin_write_CAN_MB09_LENGTH(val)      bfin_write16(CAN_MB09_LENGTH,val)
+#define bfin_read_CAN_MB09_DATA3()           bfin_read16(CAN_MB09_DATA3)
+#define bfin_write_CAN_MB09_DATA3(val)       bfin_write16(CAN_MB09_DATA3,val)
+#define bfin_read_CAN_MB09_DATA2()           bfin_read16(CAN_MB09_DATA2)
+#define bfin_write_CAN_MB09_DATA2(val)       bfin_write16(CAN_MB09_DATA2,val)
+#define bfin_read_CAN_MB09_DATA1()           bfin_read16(CAN_MB09_DATA1)
+#define bfin_write_CAN_MB09_DATA1(val)       bfin_write16(CAN_MB09_DATA1,val)
+#define bfin_read_CAN_MB09_DATA0()           bfin_read16(CAN_MB09_DATA0)
+#define bfin_write_CAN_MB09_DATA0(val)       bfin_write16(CAN_MB09_DATA0,val)
+
+#define bfin_read_CAN_MB10_ID1()             bfin_read16(CAN_MB10_ID1)
+#define bfin_write_CAN_MB10_ID1(val)         bfin_write16(CAN_MB10_ID1,val)
+#define bfin_read_CAN_MB10_ID0()             bfin_read16(CAN_MB10_ID0)
+#define bfin_write_CAN_MB10_ID0(val)         bfin_write16(CAN_MB10_ID0,val)
+#define bfin_read_CAN_MB10_TIMESTAMP()       bfin_read16(CAN_MB10_TIMESTAMP)
+#define bfin_write_CAN_MB10_TIMESTAMP(val)   bfin_write16(CAN_MB10_TIMESTAMP,val)
+#define bfin_read_CAN_MB10_LENGTH()          bfin_read16(CAN_MB10_LENGTH)
+#define bfin_write_CAN_MB10_LENGTH(val)      bfin_write16(CAN_MB10_LENGTH,val)
+#define bfin_read_CAN_MB10_DATA3()           bfin_read16(CAN_MB10_DATA3)
+#define bfin_write_CAN_MB10_DATA3(val)       bfin_write16(CAN_MB10_DATA3,val)
+#define bfin_read_CAN_MB10_DATA2()           bfin_read16(CAN_MB10_DATA2)
+#define bfin_write_CAN_MB10_DATA2(val)       bfin_write16(CAN_MB10_DATA2,val)
+#define bfin_read_CAN_MB10_DATA1()           bfin_read16(CAN_MB10_DATA1)
+#define bfin_write_CAN_MB10_DATA1(val)       bfin_write16(CAN_MB10_DATA1,val)
+#define bfin_read_CAN_MB10_DATA0()           bfin_read16(CAN_MB10_DATA0)
+#define bfin_write_CAN_MB10_DATA0(val)       bfin_write16(CAN_MB10_DATA0,val)
+
+#define bfin_read_CAN_MB11_ID1()             bfin_read16(CAN_MB11_ID1)
+#define bfin_write_CAN_MB11_ID1(val)         bfin_write16(CAN_MB11_ID1,val)
+#define bfin_read_CAN_MB11_ID0()             bfin_read16(CAN_MB11_ID0)
+#define bfin_write_CAN_MB11_ID0(val)         bfin_write16(CAN_MB11_ID0,val)
+#define bfin_read_CAN_MB11_TIMESTAMP()       bfin_read16(CAN_MB11_TIMESTAMP)
+#define bfin_write_CAN_MB11_TIMESTAMP(val)   bfin_write16(CAN_MB11_TIMESTAMP,val)
+#define bfin_read_CAN_MB11_LENGTH()          bfin_read16(CAN_MB11_LENGTH)
+#define bfin_write_CAN_MB11_LENGTH(val)      bfin_write16(CAN_MB11_LENGTH,val)
+#define bfin_read_CAN_MB11_DATA3()           bfin_read16(CAN_MB11_DATA3)
+#define bfin_write_CAN_MB11_DATA3(val)       bfin_write16(CAN_MB11_DATA3,val)
+#define bfin_read_CAN_MB11_DATA2()           bfin_read16(CAN_MB11_DATA2)
+#define bfin_write_CAN_MB11_DATA2(val)       bfin_write16(CAN_MB11_DATA2,val)
+#define bfin_read_CAN_MB11_DATA1()           bfin_read16(CAN_MB11_DATA1)
+#define bfin_write_CAN_MB11_DATA1(val)       bfin_write16(CAN_MB11_DATA1,val)
+#define bfin_read_CAN_MB11_DATA0()           bfin_read16(CAN_MB11_DATA0)
+#define bfin_write_CAN_MB11_DATA0(val)       bfin_write16(CAN_MB11_DATA0,val)
+
+#define bfin_read_CAN_MB12_ID1()             bfin_read16(CAN_MB12_ID1)
+#define bfin_write_CAN_MB12_ID1(val)         bfin_write16(CAN_MB12_ID1,val)
+#define bfin_read_CAN_MB12_ID0()             bfin_read16(CAN_MB12_ID0)
+#define bfin_write_CAN_MB12_ID0(val)         bfin_write16(CAN_MB12_ID0,val)
+#define bfin_read_CAN_MB12_TIMESTAMP()       bfin_read16(CAN_MB12_TIMESTAMP)
+#define bfin_write_CAN_MB12_TIMESTAMP(val)   bfin_write16(CAN_MB12_TIMESTAMP,val)
+#define bfin_read_CAN_MB12_LENGTH()          bfin_read16(CAN_MB12_LENGTH)
+#define bfin_write_CAN_MB12_LENGTH(val)      bfin_write16(CAN_MB12_LENGTH,val)
+#define bfin_read_CAN_MB12_DATA3()           bfin_read16(CAN_MB12_DATA3)
+#define bfin_write_CAN_MB12_DATA3(val)       bfin_write16(CAN_MB12_DATA3,val)
+#define bfin_read_CAN_MB12_DATA2()           bfin_read16(CAN_MB12_DATA2)
+#define bfin_write_CAN_MB12_DATA2(val)       bfin_write16(CAN_MB12_DATA2,val)
+#define bfin_read_CAN_MB12_DATA1()           bfin_read16(CAN_MB12_DATA1)
+#define bfin_write_CAN_MB12_DATA1(val)       bfin_write16(CAN_MB12_DATA1,val)
+#define bfin_read_CAN_MB12_DATA0()           bfin_read16(CAN_MB12_DATA0)
+#define bfin_write_CAN_MB12_DATA0(val)       bfin_write16(CAN_MB12_DATA0,val)
+
+#define bfin_read_CAN_MB13_ID1()             bfin_read16(CAN_MB13_ID1)
+#define bfin_write_CAN_MB13_ID1(val)         bfin_write16(CAN_MB13_ID1,val)
+#define bfin_read_CAN_MB13_ID0()             bfin_read16(CAN_MB13_ID0)
+#define bfin_write_CAN_MB13_ID0(val)         bfin_write16(CAN_MB13_ID0,val)
+#define bfin_read_CAN_MB13_TIMESTAMP()       bfin_read16(CAN_MB13_TIMESTAMP)
+#define bfin_write_CAN_MB13_TIMESTAMP(val)   bfin_write16(CAN_MB13_TIMESTAMP,val)
+#define bfin_read_CAN_MB13_LENGTH()          bfin_read16(CAN_MB13_LENGTH)
+#define bfin_write_CAN_MB13_LENGTH(val)      bfin_write16(CAN_MB13_LENGTH,val)
+#define bfin_read_CAN_MB13_DATA3()           bfin_read16(CAN_MB13_DATA3)
+#define bfin_write_CAN_MB13_DATA3(val)       bfin_write16(CAN_MB13_DATA3,val)
+#define bfin_read_CAN_MB13_DATA2()           bfin_read16(CAN_MB13_DATA2)
+#define bfin_write_CAN_MB13_DATA2(val)       bfin_write16(CAN_MB13_DATA2,val)
+#define bfin_read_CAN_MB13_DATA1()           bfin_read16(CAN_MB13_DATA1)
+#define bfin_write_CAN_MB13_DATA1(val)       bfin_write16(CAN_MB13_DATA1,val)
+#define bfin_read_CAN_MB13_DATA0()           bfin_read16(CAN_MB13_DATA0)
+#define bfin_write_CAN_MB13_DATA0(val)       bfin_write16(CAN_MB13_DATA0,val)
+
+#define bfin_read_CAN_MB14_ID1()             bfin_read16(CAN_MB14_ID1)
+#define bfin_write_CAN_MB14_ID1(val)         bfin_write16(CAN_MB14_ID1,val)
+#define bfin_read_CAN_MB14_ID0()             bfin_read16(CAN_MB14_ID0)
+#define bfin_write_CAN_MB14_ID0(val)         bfin_write16(CAN_MB14_ID0,val)
+#define bfin_read_CAN_MB14_TIMESTAMP()       bfin_read16(CAN_MB14_TIMESTAMP)
+#define bfin_write_CAN_MB14_TIMESTAMP(val)   bfin_write16(CAN_MB14_TIMESTAMP,val)
+#define bfin_read_CAN_MB14_LENGTH()          bfin_read16(CAN_MB14_LENGTH)
+#define bfin_write_CAN_MB14_LENGTH(val)      bfin_write16(CAN_MB14_LENGTH,val)
+#define bfin_read_CAN_MB14_DATA3()           bfin_read16(CAN_MB14_DATA3)
+#define bfin_write_CAN_MB14_DATA3(val)       bfin_write16(CAN_MB14_DATA3,val)
+#define bfin_read_CAN_MB14_DATA2()           bfin_read16(CAN_MB14_DATA2)
+#define bfin_write_CAN_MB14_DATA2(val)       bfin_write16(CAN_MB14_DATA2,val)
+#define bfin_read_CAN_MB14_DATA1()           bfin_read16(CAN_MB14_DATA1)
+#define bfin_write_CAN_MB14_DATA1(val)       bfin_write16(CAN_MB14_DATA1,val)
+#define bfin_read_CAN_MB14_DATA0()           bfin_read16(CAN_MB14_DATA0)
+#define bfin_write_CAN_MB14_DATA0(val)       bfin_write16(CAN_MB14_DATA0,val)
+
+#define bfin_read_CAN_MB15_ID1()             bfin_read16(CAN_MB15_ID1)
+#define bfin_write_CAN_MB15_ID1(val)         bfin_write16(CAN_MB15_ID1,val)
+#define bfin_read_CAN_MB15_ID0()             bfin_read16(CAN_MB15_ID0)
+#define bfin_write_CAN_MB15_ID0(val)         bfin_write16(CAN_MB15_ID0,val)
+#define bfin_read_CAN_MB15_TIMESTAMP()       bfin_read16(CAN_MB15_TIMESTAMP)
+#define bfin_write_CAN_MB15_TIMESTAMP(val)   bfin_write16(CAN_MB15_TIMESTAMP,val)
+#define bfin_read_CAN_MB15_LENGTH()          bfin_read16(CAN_MB15_LENGTH)
+#define bfin_write_CAN_MB15_LENGTH(val)      bfin_write16(CAN_MB15_LENGTH,val)
+#define bfin_read_CAN_MB15_DATA3()           bfin_read16(CAN_MB15_DATA3)
+#define bfin_write_CAN_MB15_DATA3(val)       bfin_write16(CAN_MB15_DATA3,val)
+#define bfin_read_CAN_MB15_DATA2()           bfin_read16(CAN_MB15_DATA2)
+#define bfin_write_CAN_MB15_DATA2(val)       bfin_write16(CAN_MB15_DATA2,val)
+#define bfin_read_CAN_MB15_DATA1()           bfin_read16(CAN_MB15_DATA1)
+#define bfin_write_CAN_MB15_DATA1(val)       bfin_write16(CAN_MB15_DATA1,val)
+#define bfin_read_CAN_MB15_DATA0()           bfin_read16(CAN_MB15_DATA0)
+#define bfin_write_CAN_MB15_DATA0(val)       bfin_write16(CAN_MB15_DATA0,val)
+
+#define bfin_read_CAN_MB16_ID1()             bfin_read16(CAN_MB16_ID1)
+#define bfin_write_CAN_MB16_ID1(val)         bfin_write16(CAN_MB16_ID1,val)
+#define bfin_read_CAN_MB16_ID0()             bfin_read16(CAN_MB16_ID0)
+#define bfin_write_CAN_MB16_ID0(val)         bfin_write16(CAN_MB16_ID0,val)
+#define bfin_read_CAN_MB16_TIMESTAMP()       bfin_read16(CAN_MB16_TIMESTAMP)
+#define bfin_write_CAN_MB16_TIMESTAMP(val)   bfin_write16(CAN_MB16_TIMESTAMP,val)
+#define bfin_read_CAN_MB16_LENGTH()          bfin_read16(CAN_MB16_LENGTH)
+#define bfin_write_CAN_MB16_LENGTH(val)      bfin_write16(CAN_MB16_LENGTH,val)
+#define bfin_read_CAN_MB16_DATA3()           bfin_read16(CAN_MB16_DATA3)
+#define bfin_write_CAN_MB16_DATA3(val)       bfin_write16(CAN_MB16_DATA3,val)
+#define bfin_read_CAN_MB16_DATA2()           bfin_read16(CAN_MB16_DATA2)
+#define bfin_write_CAN_MB16_DATA2(val)       bfin_write16(CAN_MB16_DATA2,val)
+#define bfin_read_CAN_MB16_DATA1()           bfin_read16(CAN_MB16_DATA1)
+#define bfin_write_CAN_MB16_DATA1(val)       bfin_write16(CAN_MB16_DATA1,val)
+#define bfin_read_CAN_MB16_DATA0()           bfin_read16(CAN_MB16_DATA0)
+#define bfin_write_CAN_MB16_DATA0(val)       bfin_write16(CAN_MB16_DATA0,val)
+
+#define bfin_read_CAN_MB17_ID1()             bfin_read16(CAN_MB17_ID1)
+#define bfin_write_CAN_MB17_ID1(val)         bfin_write16(CAN_MB17_ID1,val)
+#define bfin_read_CAN_MB17_ID0()             bfin_read16(CAN_MB17_ID0)
+#define bfin_write_CAN_MB17_ID0(val)         bfin_write16(CAN_MB17_ID0,val)
+#define bfin_read_CAN_MB17_TIMESTAMP()       bfin_read16(CAN_MB17_TIMESTAMP)
+#define bfin_write_CAN_MB17_TIMESTAMP(val)   bfin_write16(CAN_MB17_TIMESTAMP,val)
+#define bfin_read_CAN_MB17_LENGTH()          bfin_read16(CAN_MB17_LENGTH)
+#define bfin_write_CAN_MB17_LENGTH(val)      bfin_write16(CAN_MB17_LENGTH,val)
+#define bfin_read_CAN_MB17_DATA3()           bfin_read16(CAN_MB17_DATA3)
+#define bfin_write_CAN_MB17_DATA3(val)       bfin_write16(CAN_MB17_DATA3,val)
+#define bfin_read_CAN_MB17_DATA2()           bfin_read16(CAN_MB17_DATA2)
+#define bfin_write_CAN_MB17_DATA2(val)       bfin_write16(CAN_MB17_DATA2,val)
+#define bfin_read_CAN_MB17_DATA1()           bfin_read16(CAN_MB17_DATA1)
+#define bfin_write_CAN_MB17_DATA1(val)       bfin_write16(CAN_MB17_DATA1,val)
+#define bfin_read_CAN_MB17_DATA0()           bfin_read16(CAN_MB17_DATA0)
+#define bfin_write_CAN_MB17_DATA0(val)       bfin_write16(CAN_MB17_DATA0,val)
+
+#define bfin_read_CAN_MB18_ID1()             bfin_read16(CAN_MB18_ID1)
+#define bfin_write_CAN_MB18_ID1(val)         bfin_write16(CAN_MB18_ID1,val)
+#define bfin_read_CAN_MB18_ID0()             bfin_read16(CAN_MB18_ID0)
+#define bfin_write_CAN_MB18_ID0(val)         bfin_write16(CAN_MB18_ID0,val)
+#define bfin_read_CAN_MB18_TIMESTAMP()       bfin_read16(CAN_MB18_TIMESTAMP)
+#define bfin_write_CAN_MB18_TIMESTAMP(val)   bfin_write16(CAN_MB18_TIMESTAMP,val)
+#define bfin_read_CAN_MB18_LENGTH()          bfin_read16(CAN_MB18_LENGTH)
+#define bfin_write_CAN_MB18_LENGTH(val)      bfin_write16(CAN_MB18_LENGTH,val)
+#define bfin_read_CAN_MB18_DATA3()           bfin_read16(CAN_MB18_DATA3)
+#define bfin_write_CAN_MB18_DATA3(val)       bfin_write16(CAN_MB18_DATA3,val)
+#define bfin_read_CAN_MB18_DATA2()           bfin_read16(CAN_MB18_DATA2)
+#define bfin_write_CAN_MB18_DATA2(val)       bfin_write16(CAN_MB18_DATA2,val)
+#define bfin_read_CAN_MB18_DATA1()           bfin_read16(CAN_MB18_DATA1)
+#define bfin_write_CAN_MB18_DATA1(val)       bfin_write16(CAN_MB18_DATA1,val)
+#define bfin_read_CAN_MB18_DATA0()           bfin_read16(CAN_MB18_DATA0)
+#define bfin_write_CAN_MB18_DATA0(val)       bfin_write16(CAN_MB18_DATA0,val)
+
+#define bfin_read_CAN_MB19_ID1()             bfin_read16(CAN_MB19_ID1)
+#define bfin_write_CAN_MB19_ID1(val)         bfin_write16(CAN_MB19_ID1,val)
+#define bfin_read_CAN_MB19_ID0()             bfin_read16(CAN_MB19_ID0)
+#define bfin_write_CAN_MB19_ID0(val)         bfin_write16(CAN_MB19_ID0,val)
+#define bfin_read_CAN_MB19_TIMESTAMP()       bfin_read16(CAN_MB19_TIMESTAMP)
+#define bfin_write_CAN_MB19_TIMESTAMP(val)   bfin_write16(CAN_MB19_TIMESTAMP,val)
+#define bfin_read_CAN_MB19_LENGTH()          bfin_read16(CAN_MB19_LENGTH)
+#define bfin_write_CAN_MB19_LENGTH(val)      bfin_write16(CAN_MB19_LENGTH,val)
+#define bfin_read_CAN_MB19_DATA3()           bfin_read16(CAN_MB19_DATA3)
+#define bfin_write_CAN_MB19_DATA3(val)       bfin_write16(CAN_MB19_DATA3,val)
+#define bfin_read_CAN_MB19_DATA2()           bfin_read16(CAN_MB19_DATA2)
+#define bfin_write_CAN_MB19_DATA2(val)       bfin_write16(CAN_MB19_DATA2,val)
+#define bfin_read_CAN_MB19_DATA1()           bfin_read16(CAN_MB19_DATA1)
+#define bfin_write_CAN_MB19_DATA1(val)       bfin_write16(CAN_MB19_DATA1,val)
+#define bfin_read_CAN_MB19_DATA0()           bfin_read16(CAN_MB19_DATA0)
+#define bfin_write_CAN_MB19_DATA0(val)       bfin_write16(CAN_MB19_DATA0,val)
+
+#define bfin_read_CAN_MB20_ID1()             bfin_read16(CAN_MB20_ID1)
+#define bfin_write_CAN_MB20_ID1(val)         bfin_write16(CAN_MB20_ID1,val)
+#define bfin_read_CAN_MB20_ID0()             bfin_read16(CAN_MB20_ID0)
+#define bfin_write_CAN_MB20_ID0(val)         bfin_write16(CAN_MB20_ID0,val)
+#define bfin_read_CAN_MB20_TIMESTAMP()       bfin_read16(CAN_MB20_TIMESTAMP)
+#define bfin_write_CAN_MB20_TIMESTAMP(val)   bfin_write16(CAN_MB20_TIMESTAMP,val)
+#define bfin_read_CAN_MB20_LENGTH()          bfin_read16(CAN_MB20_LENGTH)
+#define bfin_write_CAN_MB20_LENGTH(val)      bfin_write16(CAN_MB20_LENGTH,val)
+#define bfin_read_CAN_MB20_DATA3()           bfin_read16(CAN_MB20_DATA3)
+#define bfin_write_CAN_MB20_DATA3(val)       bfin_write16(CAN_MB20_DATA3,val)
+#define bfin_read_CAN_MB20_DATA2()           bfin_read16(CAN_MB20_DATA2)
+#define bfin_write_CAN_MB20_DATA2(val)       bfin_write16(CAN_MB20_DATA2,val)
+#define bfin_read_CAN_MB20_DATA1()           bfin_read16(CAN_MB20_DATA1)
+#define bfin_write_CAN_MB20_DATA1(val)       bfin_write16(CAN_MB20_DATA1,val)
+#define bfin_read_CAN_MB20_DATA0()           bfin_read16(CAN_MB20_DATA0)
+#define bfin_write_CAN_MB20_DATA0(val)       bfin_write16(CAN_MB20_DATA0,val)
+
+#define bfin_read_CAN_MB21_ID1()             bfin_read16(CAN_MB21_ID1)
+#define bfin_write_CAN_MB21_ID1(val)         bfin_write16(CAN_MB21_ID1,val)
+#define bfin_read_CAN_MB21_ID0()             bfin_read16(CAN_MB21_ID0)
+#define bfin_write_CAN_MB21_ID0(val)         bfin_write16(CAN_MB21_ID0,val)
+#define bfin_read_CAN_MB21_TIMESTAMP()       bfin_read16(CAN_MB21_TIMESTAMP)
+#define bfin_write_CAN_MB21_TIMESTAMP(val)   bfin_write16(CAN_MB21_TIMESTAMP,val)
+#define bfin_read_CAN_MB21_LENGTH()          bfin_read16(CAN_MB21_LENGTH)
+#define bfin_write_CAN_MB21_LENGTH(val)      bfin_write16(CAN_MB21_LENGTH,val)
+#define bfin_read_CAN_MB21_DATA3()           bfin_read16(CAN_MB21_DATA3)
+#define bfin_write_CAN_MB21_DATA3(val)       bfin_write16(CAN_MB21_DATA3,val)
+#define bfin_read_CAN_MB21_DATA2()           bfin_read16(CAN_MB21_DATA2)
+#define bfin_write_CAN_MB21_DATA2(val)       bfin_write16(CAN_MB21_DATA2,val)
+#define bfin_read_CAN_MB21_DATA1()           bfin_read16(CAN_MB21_DATA1)
+#define bfin_write_CAN_MB21_DATA1(val)       bfin_write16(CAN_MB21_DATA1,val)
+#define bfin_read_CAN_MB21_DATA0()           bfin_read16(CAN_MB21_DATA0)
+#define bfin_write_CAN_MB21_DATA0(val)       bfin_write16(CAN_MB21_DATA0,val)
+
+#define bfin_read_CAN_MB22_ID1()             bfin_read16(CAN_MB22_ID1)
+#define bfin_write_CAN_MB22_ID1(val)         bfin_write16(CAN_MB22_ID1,val)
+#define bfin_read_CAN_MB22_ID0()             bfin_read16(CAN_MB22_ID0)
+#define bfin_write_CAN_MB22_ID0(val)         bfin_write16(CAN_MB22_ID0,val)
+#define bfin_read_CAN_MB22_TIMESTAMP()       bfin_read16(CAN_MB22_TIMESTAMP)
+#define bfin_write_CAN_MB22_TIMESTAMP(val)   bfin_write16(CAN_MB22_TIMESTAMP,val)
+#define bfin_read_CAN_MB22_LENGTH()          bfin_read16(CAN_MB22_LENGTH)
+#define bfin_write_CAN_MB22_LENGTH(val)      bfin_write16(CAN_MB22_LENGTH,val)
+#define bfin_read_CAN_MB22_DATA3()           bfin_read16(CAN_MB22_DATA3)
+#define bfin_write_CAN_MB22_DATA3(val)       bfin_write16(CAN_MB22_DATA3,val)
+#define bfin_read_CAN_MB22_DATA2()           bfin_read16(CAN_MB22_DATA2)
+#define bfin_write_CAN_MB22_DATA2(val)       bfin_write16(CAN_MB22_DATA2,val)
+#define bfin_read_CAN_MB22_DATA1()           bfin_read16(CAN_MB22_DATA1)
+#define bfin_write_CAN_MB22_DATA1(val)       bfin_write16(CAN_MB22_DATA1,val)
+#define bfin_read_CAN_MB22_DATA0()           bfin_read16(CAN_MB22_DATA0)
+#define bfin_write_CAN_MB22_DATA0(val)       bfin_write16(CAN_MB22_DATA0,val)
+
+#define bfin_read_CAN_MB23_ID1()             bfin_read16(CAN_MB23_ID1)
+#define bfin_write_CAN_MB23_ID1(val)         bfin_write16(CAN_MB23_ID1,val)
+#define bfin_read_CAN_MB23_ID0()             bfin_read16(CAN_MB23_ID0)
+#define bfin_write_CAN_MB23_ID0(val)         bfin_write16(CAN_MB23_ID0,val)
+#define bfin_read_CAN_MB23_TIMESTAMP()       bfin_read16(CAN_MB23_TIMESTAMP)
+#define bfin_write_CAN_MB23_TIMESTAMP(val)   bfin_write16(CAN_MB23_TIMESTAMP,val)
+#define bfin_read_CAN_MB23_LENGTH()          bfin_read16(CAN_MB23_LENGTH)
+#define bfin_write_CAN_MB23_LENGTH(val)      bfin_write16(CAN_MB23_LENGTH,val)
+#define bfin_read_CAN_MB23_DATA3()           bfin_read16(CAN_MB23_DATA3)
+#define bfin_write_CAN_MB23_DATA3(val)       bfin_write16(CAN_MB23_DATA3,val)
+#define bfin_read_CAN_MB23_DATA2()           bfin_read16(CAN_MB23_DATA2)
+#define bfin_write_CAN_MB23_DATA2(val)       bfin_write16(CAN_MB23_DATA2,val)
+#define bfin_read_CAN_MB23_DATA1()           bfin_read16(CAN_MB23_DATA1)
+#define bfin_write_CAN_MB23_DATA1(val)       bfin_write16(CAN_MB23_DATA1,val)
+#define bfin_read_CAN_MB23_DATA0()           bfin_read16(CAN_MB23_DATA0)
+#define bfin_write_CAN_MB23_DATA0(val)       bfin_write16(CAN_MB23_DATA0,val)
+
+#define bfin_read_CAN_MB24_ID1()             bfin_read16(CAN_MB24_ID1)
+#define bfin_write_CAN_MB24_ID1(val)         bfin_write16(CAN_MB24_ID1,val)
+#define bfin_read_CAN_MB24_ID0()             bfin_read16(CAN_MB24_ID0)
+#define bfin_write_CAN_MB24_ID0(val)         bfin_write16(CAN_MB24_ID0,val)
+#define bfin_read_CAN_MB24_TIMESTAMP()       bfin_read16(CAN_MB24_TIMESTAMP)
+#define bfin_write_CAN_MB24_TIMESTAMP(val)   bfin_write16(CAN_MB24_TIMESTAMP,val)
+#define bfin_read_CAN_MB24_LENGTH()          bfin_read16(CAN_MB24_LENGTH)
+#define bfin_write_CAN_MB24_LENGTH(val)      bfin_write16(CAN_MB24_LENGTH,val)
+#define bfin_read_CAN_MB24_DATA3()           bfin_read16(CAN_MB24_DATA3)
+#define bfin_write_CAN_MB24_DATA3(val)       bfin_write16(CAN_MB24_DATA3,val)
+#define bfin_read_CAN_MB24_DATA2()           bfin_read16(CAN_MB24_DATA2)
+#define bfin_write_CAN_MB24_DATA2(val)       bfin_write16(CAN_MB24_DATA2,val)
+#define bfin_read_CAN_MB24_DATA1()           bfin_read16(CAN_MB24_DATA1)
+#define bfin_write_CAN_MB24_DATA1(val)       bfin_write16(CAN_MB24_DATA1,val)
+#define bfin_read_CAN_MB24_DATA0()           bfin_read16(CAN_MB24_DATA0)
+#define bfin_write_CAN_MB24_DATA0(val)       bfin_write16(CAN_MB24_DATA0,val)
+
+#define bfin_read_CAN_MB25_ID1()             bfin_read16(CAN_MB25_ID1)
+#define bfin_write_CAN_MB25_ID1(val)         bfin_write16(CAN_MB25_ID1,val)
+#define bfin_read_CAN_MB25_ID0()             bfin_read16(CAN_MB25_ID0)
+#define bfin_write_CAN_MB25_ID0(val)         bfin_write16(CAN_MB25_ID0,val)
+#define bfin_read_CAN_MB25_TIMESTAMP()       bfin_read16(CAN_MB25_TIMESTAMP)
+#define bfin_write_CAN_MB25_TIMESTAMP(val)   bfin_write16(CAN_MB25_TIMESTAMP,val)
+#define bfin_read_CAN_MB25_LENGTH()          bfin_read16(CAN_MB25_LENGTH)
+#define bfin_write_CAN_MB25_LENGTH(val)      bfin_write16(CAN_MB25_LENGTH,val)
+#define bfin_read_CAN_MB25_DATA3()           bfin_read16(CAN_MB25_DATA3)
+#define bfin_write_CAN_MB25_DATA3(val)       bfin_write16(CAN_MB25_DATA3,val)
+#define bfin_read_CAN_MB25_DATA2()           bfin_read16(CAN_MB25_DATA2)
+#define bfin_write_CAN_MB25_DATA2(val)       bfin_write16(CAN_MB25_DATA2,val)
+#define bfin_read_CAN_MB25_DATA1()           bfin_read16(CAN_MB25_DATA1)
+#define bfin_write_CAN_MB25_DATA1(val)       bfin_write16(CAN_MB25_DATA1,val)
+#define bfin_read_CAN_MB25_DATA0()           bfin_read16(CAN_MB25_DATA0)
+#define bfin_write_CAN_MB25_DATA0(val)       bfin_write16(CAN_MB25_DATA0,val)
+
+#define bfin_read_CAN_MB26_ID1()             bfin_read16(CAN_MB26_ID1)
+#define bfin_write_CAN_MB26_ID1(val)         bfin_write16(CAN_MB26_ID1,val)
+#define bfin_read_CAN_MB26_ID0()             bfin_read16(CAN_MB26_ID0)
+#define bfin_write_CAN_MB26_ID0(val)         bfin_write16(CAN_MB26_ID0,val)
+#define bfin_read_CAN_MB26_TIMESTAMP()       bfin_read16(CAN_MB26_TIMESTAMP)
+#define bfin_write_CAN_MB26_TIMESTAMP(val)   bfin_write16(CAN_MB26_TIMESTAMP,val)
+#define bfin_read_CAN_MB26_LENGTH()          bfin_read16(CAN_MB26_LENGTH)
+#define bfin_write_CAN_MB26_LENGTH(val)      bfin_write16(CAN_MB26_LENGTH,val)
+#define bfin_read_CAN_MB26_DATA3()           bfin_read16(CAN_MB26_DATA3)
+#define bfin_write_CAN_MB26_DATA3(val)       bfin_write16(CAN_MB26_DATA3,val)
+#define bfin_read_CAN_MB26_DATA2()           bfin_read16(CAN_MB26_DATA2)
+#define bfin_write_CAN_MB26_DATA2(val)       bfin_write16(CAN_MB26_DATA2,val)
+#define bfin_read_CAN_MB26_DATA1()           bfin_read16(CAN_MB26_DATA1)
+#define bfin_write_CAN_MB26_DATA1(val)       bfin_write16(CAN_MB26_DATA1,val)
+#define bfin_read_CAN_MB26_DATA0()           bfin_read16(CAN_MB26_DATA0)
+#define bfin_write_CAN_MB26_DATA0(val)       bfin_write16(CAN_MB26_DATA0,val)
+
+#define bfin_read_CAN_MB27_ID1()             bfin_read16(CAN_MB27_ID1)
+#define bfin_write_CAN_MB27_ID1(val)         bfin_write16(CAN_MB27_ID1,val)
+#define bfin_read_CAN_MB27_ID0()             bfin_read16(CAN_MB27_ID0)
+#define bfin_write_CAN_MB27_ID0(val)         bfin_write16(CAN_MB27_ID0,val)
+#define bfin_read_CAN_MB27_TIMESTAMP()       bfin_read16(CAN_MB27_TIMESTAMP)
+#define bfin_write_CAN_MB27_TIMESTAMP(val)   bfin_write16(CAN_MB27_TIMESTAMP,val)
+#define bfin_read_CAN_MB27_LENGTH()          bfin_read16(CAN_MB27_LENGTH)
+#define bfin_write_CAN_MB27_LENGTH(val)      bfin_write16(CAN_MB27_LENGTH,val)
+#define bfin_read_CAN_MB27_DATA3()           bfin_read16(CAN_MB27_DATA3)
+#define bfin_write_CAN_MB27_DATA3(val)       bfin_write16(CAN_MB27_DATA3,val)
+#define bfin_read_CAN_MB27_DATA2()           bfin_read16(CAN_MB27_DATA2)
+#define bfin_write_CAN_MB27_DATA2(val)       bfin_write16(CAN_MB27_DATA2,val)
+#define bfin_read_CAN_MB27_DATA1()           bfin_read16(CAN_MB27_DATA1)
+#define bfin_write_CAN_MB27_DATA1(val)       bfin_write16(CAN_MB27_DATA1,val)
+#define bfin_read_CAN_MB27_DATA0()           bfin_read16(CAN_MB27_DATA0)
+#define bfin_write_CAN_MB27_DATA0(val)       bfin_write16(CAN_MB27_DATA0,val)
+
+#define bfin_read_CAN_MB28_ID1()             bfin_read16(CAN_MB28_ID1)
+#define bfin_write_CAN_MB28_ID1(val)         bfin_write16(CAN_MB28_ID1,val)
+#define bfin_read_CAN_MB28_ID0()             bfin_read16(CAN_MB28_ID0)
+#define bfin_write_CAN_MB28_ID0(val)         bfin_write16(CAN_MB28_ID0,val)
+#define bfin_read_CAN_MB28_TIMESTAMP()       bfin_read16(CAN_MB28_TIMESTAMP)
+#define bfin_write_CAN_MB28_TIMESTAMP(val)   bfin_write16(CAN_MB28_TIMESTAMP,val)
+#define bfin_read_CAN_MB28_LENGTH()          bfin_read16(CAN_MB28_LENGTH)
+#define bfin_write_CAN_MB28_LENGTH(val)      bfin_write16(CAN_MB28_LENGTH,val)
+#define bfin_read_CAN_MB28_DATA3()           bfin_read16(CAN_MB28_DATA3)
+#define bfin_write_CAN_MB28_DATA3(val)       bfin_write16(CAN_MB28_DATA3,val)
+#define bfin_read_CAN_MB28_DATA2()           bfin_read16(CAN_MB28_DATA2)
+#define bfin_write_CAN_MB28_DATA2(val)       bfin_write16(CAN_MB28_DATA2,val)
+#define bfin_read_CAN_MB28_DATA1()           bfin_read16(CAN_MB28_DATA1)
+#define bfin_write_CAN_MB28_DATA1(val)       bfin_write16(CAN_MB28_DATA1,val)
+#define bfin_read_CAN_MB28_DATA0()           bfin_read16(CAN_MB28_DATA0)
+#define bfin_write_CAN_MB28_DATA0(val)       bfin_write16(CAN_MB28_DATA0,val)
+
+#define bfin_read_CAN_MB29_ID1()             bfin_read16(CAN_MB29_ID1)
+#define bfin_write_CAN_MB29_ID1(val)         bfin_write16(CAN_MB29_ID1,val)
+#define bfin_read_CAN_MB29_ID0()             bfin_read16(CAN_MB29_ID0)
+#define bfin_write_CAN_MB29_ID0(val)         bfin_write16(CAN_MB29_ID0,val)
+#define bfin_read_CAN_MB29_TIMESTAMP()       bfin_read16(CAN_MB29_TIMESTAMP)
+#define bfin_write_CAN_MB29_TIMESTAMP(val)   bfin_write16(CAN_MB29_TIMESTAMP,val)
+#define bfin_read_CAN_MB29_LENGTH()          bfin_read16(CAN_MB29_LENGTH)
+#define bfin_write_CAN_MB29_LENGTH(val)      bfin_write16(CAN_MB29_LENGTH,val)
+#define bfin_read_CAN_MB29_DATA3()           bfin_read16(CAN_MB29_DATA3)
+#define bfin_write_CAN_MB29_DATA3(val)       bfin_write16(CAN_MB29_DATA3,val)
+#define bfin_read_CAN_MB29_DATA2()           bfin_read16(CAN_MB29_DATA2)
+#define bfin_write_CAN_MB29_DATA2(val)       bfin_write16(CAN_MB29_DATA2,val)
+#define bfin_read_CAN_MB29_DATA1()           bfin_read16(CAN_MB29_DATA1)
+#define bfin_write_CAN_MB29_DATA1(val)       bfin_write16(CAN_MB29_DATA1,val)
+#define bfin_read_CAN_MB29_DATA0()           bfin_read16(CAN_MB29_DATA0)
+#define bfin_write_CAN_MB29_DATA0(val)       bfin_write16(CAN_MB29_DATA0,val)
+
+#define bfin_read_CAN_MB30_ID1()             bfin_read16(CAN_MB30_ID1)
+#define bfin_write_CAN_MB30_ID1(val)         bfin_write16(CAN_MB30_ID1,val)
+#define bfin_read_CAN_MB30_ID0()             bfin_read16(CAN_MB30_ID0)
+#define bfin_write_CAN_MB30_ID0(val)         bfin_write16(CAN_MB30_ID0,val)
+#define bfin_read_CAN_MB30_TIMESTAMP()       bfin_read16(CAN_MB30_TIMESTAMP)
+#define bfin_write_CAN_MB30_TIMESTAMP(val)   bfin_write16(CAN_MB30_TIMESTAMP,val)
+#define bfin_read_CAN_MB30_LENGTH()          bfin_read16(CAN_MB30_LENGTH)
+#define bfin_write_CAN_MB30_LENGTH(val)      bfin_write16(CAN_MB30_LENGTH,val)
+#define bfin_read_CAN_MB30_DATA3()           bfin_read16(CAN_MB30_DATA3)
+#define bfin_write_CAN_MB30_DATA3(val)       bfin_write16(CAN_MB30_DATA3,val)
+#define bfin_read_CAN_MB30_DATA2()           bfin_read16(CAN_MB30_DATA2)
+#define bfin_write_CAN_MB30_DATA2(val)       bfin_write16(CAN_MB30_DATA2,val)
+#define bfin_read_CAN_MB30_DATA1()           bfin_read16(CAN_MB30_DATA1)
+#define bfin_write_CAN_MB30_DATA1(val)       bfin_write16(CAN_MB30_DATA1,val)
+#define bfin_read_CAN_MB30_DATA0()           bfin_read16(CAN_MB30_DATA0)
+#define bfin_write_CAN_MB30_DATA0(val)       bfin_write16(CAN_MB30_DATA0,val)
+
+#define bfin_read_CAN_MB31_ID1()             bfin_read16(CAN_MB31_ID1)
+#define bfin_write_CAN_MB31_ID1(val)         bfin_write16(CAN_MB31_ID1,val)
+#define bfin_read_CAN_MB31_ID0()             bfin_read16(CAN_MB31_ID0)
+#define bfin_write_CAN_MB31_ID0(val)         bfin_write16(CAN_MB31_ID0,val)
+#define bfin_read_CAN_MB31_TIMESTAMP()       bfin_read16(CAN_MB31_TIMESTAMP)
+#define bfin_write_CAN_MB31_TIMESTAMP(val)   bfin_write16(CAN_MB31_TIMESTAMP,val)
+#define bfin_read_CAN_MB31_LENGTH()          bfin_read16(CAN_MB31_LENGTH)
+#define bfin_write_CAN_MB31_LENGTH(val)      bfin_write16(CAN_MB31_LENGTH,val)
+#define bfin_read_CAN_MB31_DATA3()           bfin_read16(CAN_MB31_DATA3)
+#define bfin_write_CAN_MB31_DATA3(val)       bfin_write16(CAN_MB31_DATA3,val)
+#define bfin_read_CAN_MB31_DATA2()           bfin_read16(CAN_MB31_DATA2)
+#define bfin_write_CAN_MB31_DATA2(val)       bfin_write16(CAN_MB31_DATA2,val)
+#define bfin_read_CAN_MB31_DATA1()           bfin_read16(CAN_MB31_DATA1)
+#define bfin_write_CAN_MB31_DATA1(val)       bfin_write16(CAN_MB31_DATA1,val)
+#define bfin_read_CAN_MB31_DATA0()           bfin_read16(CAN_MB31_DATA0)
+#define bfin_write_CAN_MB31_DATA0(val)       bfin_write16(CAN_MB31_DATA0,val)
+
+/* CAN Mailbox Area Macros		*/
+#define bfin_read_CAN_MB_ID1(x)()            bfin_read16(CAN_MB_ID1(x))
+#define bfin_write_CAN_MB_ID1(x)(val)        bfin_write16(CAN_MB_ID1(x),val)
+#define bfin_read_CAN_MB_ID0(x)()            bfin_read16(CAN_MB_ID0(x))
+#define bfin_write_CAN_MB_ID0(x)(val)        bfin_write16(CAN_MB_ID0(x),val)
+#define bfin_read_CAN_MB_TIMESTAMP(x)()      bfin_read16(CAN_MB_TIMESTAMP(x))
+#define bfin_write_CAN_MB_TIMESTAMP(x)(val)  bfin_write16(CAN_MB_TIMESTAMP(x),val)
+#define bfin_read_CAN_MB_LENGTH(x)()         bfin_read16(CAN_MB_LENGTH(x))
+#define bfin_write_CAN_MB_LENGTH(x)(val)     bfin_write16(CAN_MB_LENGTH(x),val)
+#define bfin_read_CAN_MB_DATA3(x)()          bfin_read16(CAN_MB_DATA3(x))
+#define bfin_write_CAN_MB_DATA3(x)(val)      bfin_write16(CAN_MB_DATA3(x),val)
+#define bfin_read_CAN_MB_DATA2(x)()          bfin_read16(CAN_MB_DATA2(x))
+#define bfin_write_CAN_MB_DATA2(x)(val)      bfin_write16(CAN_MB_DATA2(x),val)
+#define bfin_read_CAN_MB_DATA1(x)()          bfin_read16(CAN_MB_DATA1(x))
+#define bfin_write_CAN_MB_DATA1(x)(val)      bfin_write16(CAN_MB_DATA1(x),val)
+#define bfin_read_CAN_MB_DATA0(x)()          bfin_read16(CAN_MB_DATA0(x))
+#define bfin_write_CAN_MB_DATA0(x)(val)      bfin_write16(CAN_MB_DATA0(x),val)
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)								*/
+#define bfin_read_PORTF_FER()                bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val)            bfin_write16(PORTF_FER,val)
+#define bfin_read_PORTG_FER()                bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val)            bfin_write16(PORTG_FER,val)
+#define bfin_read_PORTH_FER()                bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val)            bfin_write16(PORTH_FER,val)
+#define bfin_read_PORT_MUX()                 bfin_read16(BFIN_PORT_MUX)
+#define bfin_write_PORT_MUX(val)             bfin_write16(BFIN_PORT_MUX,val)
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)								*/
+#define bfin_read_HMDMA0_CONTROL()           bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)       bfin_write16(HMDMA0_CONTROL,val)
+#define bfin_read_HMDMA0_ECINIT()            bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)        bfin_write16(HMDMA0_ECINIT,val)
+#define bfin_read_HMDMA0_BCINIT()            bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)        bfin_write16(HMDMA0_BCINIT,val)
+#define bfin_read_HMDMA0_ECURGENT()          bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)      bfin_write16(HMDMA0_ECURGENT,val)
+#define bfin_read_HMDMA0_ECOVERFLOW()        bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)    bfin_write16(HMDMA0_ECOVERFLOW,val)
+#define bfin_read_HMDMA0_ECOUNT()            bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)        bfin_write16(HMDMA0_ECOUNT,val)
+#define bfin_read_HMDMA0_BCOUNT()            bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)        bfin_write16(HMDMA0_BCOUNT,val)
+
+#define bfin_read_HMDMA1_CONTROL()           bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)       bfin_write16(HMDMA1_CONTROL,val)
+#define bfin_read_HMDMA1_ECINIT()            bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)        bfin_write16(HMDMA1_ECINIT,val)
+#define bfin_read_HMDMA1_BCINIT()            bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)        bfin_write16(HMDMA1_BCINIT,val)
+#define bfin_read_HMDMA1_ECURGENT()          bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)      bfin_write16(HMDMA1_ECURGENT,val)
+#define bfin_read_HMDMA1_ECOVERFLOW()        bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)    bfin_write16(HMDMA1_ECOVERFLOW,val)
+#define bfin_read_HMDMA1_ECOUNT()            bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)        bfin_write16(HMDMA1_ECOUNT,val)
+#define bfin_read_HMDMA1_BCOUNT()            bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)        bfin_write16(HMDMA1_BCOUNT,val)
+
+#endif				/* _CDEF_BF534_H */
diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
new file mode 100644
index 00000000000..b8fc949a991
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
@@ -0,0 +1,206 @@
+/*
+ * File:         include/asm-blackfin/mach-bf537/cdefBF537.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *	System MMR Register Map
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF537_H
+#define _CDEF_BF537_H
+
+/* Include MMRs Common to BF534 								*/
+#include "cdefBF534.h"
+
+/* Include all Core registers and bit definitions 									*/
+#include "defBF537.h"
+
+/* Include Macro "Defines" For EMAC (Unique to BF536/BF537		*/
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) 						*/
+#define bfin_read_EMAC_OPMODE()              bfin_read32(EMAC_OPMODE)
+#define bfin_write_EMAC_OPMODE(val)          bfin_write32(EMAC_OPMODE,val)
+#define bfin_read_EMAC_ADDRLO()              bfin_read32(EMAC_ADDRLO)
+#define bfin_write_EMAC_ADDRLO(val)          bfin_write32(EMAC_ADDRLO,val)
+#define bfin_read_EMAC_ADDRHI()              bfin_read32(EMAC_ADDRHI)
+#define bfin_write_EMAC_ADDRHI(val)          bfin_write32(EMAC_ADDRHI,val)
+#define bfin_read_EMAC_HASHLO()              bfin_read32(EMAC_HASHLO)
+#define bfin_write_EMAC_HASHLO(val)          bfin_write32(EMAC_HASHLO,val)
+#define bfin_read_EMAC_HASHHI()              bfin_read32(EMAC_HASHHI)
+#define bfin_write_EMAC_HASHHI(val)          bfin_write32(EMAC_HASHHI,val)
+#define bfin_read_EMAC_STAADD()              bfin_read32(EMAC_STAADD)
+#define bfin_write_EMAC_STAADD(val)          bfin_write32(EMAC_STAADD,val)
+#define bfin_read_EMAC_STADAT()              bfin_read32(EMAC_STADAT)
+#define bfin_write_EMAC_STADAT(val)          bfin_write32(EMAC_STADAT,val)
+#define bfin_read_EMAC_FLC()                 bfin_read32(EMAC_FLC)
+#define bfin_write_EMAC_FLC(val)             bfin_write32(EMAC_FLC,val)
+#define bfin_read_EMAC_VLAN1()               bfin_read32(EMAC_VLAN1)
+#define bfin_write_EMAC_VLAN1(val)           bfin_write32(EMAC_VLAN1,val)
+#define bfin_read_EMAC_VLAN2()               bfin_read32(EMAC_VLAN2)
+#define bfin_write_EMAC_VLAN2(val)           bfin_write32(EMAC_VLAN2,val)
+#define bfin_read_EMAC_WKUP_CTL()            bfin_read32(EMAC_WKUP_CTL)
+#define bfin_write_EMAC_WKUP_CTL(val)        bfin_write32(EMAC_WKUP_CTL,val)
+#define bfin_read_EMAC_WKUP_FFMSK0()         bfin_read32(EMAC_WKUP_FFMSK0)
+#define bfin_write_EMAC_WKUP_FFMSK0(val)     bfin_write32(EMAC_WKUP_FFMSK0,val)
+#define bfin_read_EMAC_WKUP_FFMSK1()         bfin_read32(EMAC_WKUP_FFMSK1)
+#define bfin_write_EMAC_WKUP_FFMSK1(val)     bfin_write32(EMAC_WKUP_FFMSK1,val)
+#define bfin_read_EMAC_WKUP_FFMSK2()         bfin_read32(EMAC_WKUP_FFMSK2)
+#define bfin_write_EMAC_WKUP_FFMSK2(val)     bfin_write32(EMAC_WKUP_FFMSK2,val)
+#define bfin_read_EMAC_WKUP_FFMSK3()         bfin_read32(EMAC_WKUP_FFMSK3)
+#define bfin_write_EMAC_WKUP_FFMSK3(val)     bfin_write32(EMAC_WKUP_FFMSK3,val)
+#define bfin_read_EMAC_WKUP_FFCMD()          bfin_read32(EMAC_WKUP_FFCMD)
+#define bfin_write_EMAC_WKUP_FFCMD(val)      bfin_write32(EMAC_WKUP_FFCMD,val)
+#define bfin_read_EMAC_WKUP_FFOFF()          bfin_read32(EMAC_WKUP_FFOFF)
+#define bfin_write_EMAC_WKUP_FFOFF(val)      bfin_write32(EMAC_WKUP_FFOFF,val)
+#define bfin_read_EMAC_WKUP_FFCRC0()         bfin_read32(EMAC_WKUP_FFCRC0)
+#define bfin_write_EMAC_WKUP_FFCRC0(val)     bfin_write32(EMAC_WKUP_FFCRC0,val)
+#define bfin_read_EMAC_WKUP_FFCRC1()         bfin_read32(EMAC_WKUP_FFCRC1)
+#define bfin_write_EMAC_WKUP_FFCRC1(val)     bfin_write32(EMAC_WKUP_FFCRC1,val)
+
+#define bfin_read_EMAC_SYSCTL()              bfin_read32(EMAC_SYSCTL)
+#define bfin_write_EMAC_SYSCTL(val)          bfin_write32(EMAC_SYSCTL,val)
+#define bfin_read_EMAC_SYSTAT()              bfin_read32(EMAC_SYSTAT)
+#define bfin_write_EMAC_SYSTAT(val)          bfin_write32(EMAC_SYSTAT,val)
+#define bfin_read_EMAC_RX_STAT()             bfin_read32(EMAC_RX_STAT)
+#define bfin_write_EMAC_RX_STAT(val)         bfin_write32(EMAC_RX_STAT,val)
+#define bfin_read_EMAC_RX_STKY()             bfin_read32(EMAC_RX_STKY)
+#define bfin_write_EMAC_RX_STKY(val)         bfin_write32(EMAC_RX_STKY,val)
+#define bfin_read_EMAC_RX_IRQE()             bfin_read32(EMAC_RX_IRQE)
+#define bfin_write_EMAC_RX_IRQE(val)         bfin_write32(EMAC_RX_IRQE,val)
+#define bfin_read_EMAC_TX_STAT()             bfin_read32(EMAC_TX_STAT)
+#define bfin_write_EMAC_TX_STAT(val)         bfin_write32(EMAC_TX_STAT,val)
+#define bfin_read_EMAC_TX_STKY()             bfin_read32(EMAC_TX_STKY)
+#define bfin_write_EMAC_TX_STKY(val)         bfin_write32(EMAC_TX_STKY,val)
+#define bfin_read_EMAC_TX_IRQE()             bfin_read32(EMAC_TX_IRQE)
+#define bfin_write_EMAC_TX_IRQE(val)         bfin_write32(EMAC_TX_IRQE,val)
+
+#define bfin_read_EMAC_MMC_CTL()             bfin_read32(EMAC_MMC_CTL)
+#define bfin_write_EMAC_MMC_CTL(val)         bfin_write32(EMAC_MMC_CTL,val)
+#define bfin_read_EMAC_MMC_RIRQS()           bfin_read32(EMAC_MMC_RIRQS)
+#define bfin_write_EMAC_MMC_RIRQS(val)       bfin_write32(EMAC_MMC_RIRQS,val)
+#define bfin_read_EMAC_MMC_RIRQE()           bfin_read32(EMAC_MMC_RIRQE)
+#define bfin_write_EMAC_MMC_RIRQE(val)       bfin_write32(EMAC_MMC_RIRQE,val)
+#define bfin_read_EMAC_MMC_TIRQS()           bfin_read32(EMAC_MMC_TIRQS)
+#define bfin_write_EMAC_MMC_TIRQS(val)       bfin_write32(EMAC_MMC_TIRQS,val)
+#define bfin_read_EMAC_MMC_TIRQE()           bfin_read32(EMAC_MMC_TIRQE)
+#define bfin_write_EMAC_MMC_TIRQE(val)       bfin_write32(EMAC_MMC_TIRQE,val)
+
+#define bfin_read_EMAC_RXC_OK()              bfin_read32(EMAC_RXC_OK)
+#define bfin_write_EMAC_RXC_OK(val)          bfin_write32(EMAC_RXC_OK,val)
+#define bfin_read_EMAC_RXC_FCS()             bfin_read32(EMAC_RXC_FCS)
+#define bfin_write_EMAC_RXC_FCS(val)         bfin_write32(EMAC_RXC_FCS,val)
+#define bfin_read_EMAC_RXC_ALIGN()           bfin_read32(EMAC_RXC_ALIGN)
+#define bfin_write_EMAC_RXC_ALIGN(val)       bfin_write32(EMAC_RXC_ALIGN,val)
+#define bfin_read_EMAC_RXC_OCTET()           bfin_read32(EMAC_RXC_OCTET)
+#define bfin_write_EMAC_RXC_OCTET(val)       bfin_write32(EMAC_RXC_OCTET,val)
+#define bfin_read_EMAC_RXC_DMAOVF()          bfin_read32(EMAC_RXC_DMAOVF)
+#define bfin_write_EMAC_RXC_DMAOVF(val)      bfin_write32(EMAC_RXC_DMAOVF,val)
+#define bfin_read_EMAC_RXC_UNICST()          bfin_read32(EMAC_RXC_UNICST)
+#define bfin_write_EMAC_RXC_UNICST(val)      bfin_write32(EMAC_RXC_UNICST,val)
+#define bfin_read_EMAC_RXC_MULTI()           bfin_read32(EMAC_RXC_MULTI)
+#define bfin_write_EMAC_RXC_MULTI(val)       bfin_write32(EMAC_RXC_MULTI,val)
+#define bfin_read_EMAC_RXC_BROAD()           bfin_read32(EMAC_RXC_BROAD)
+#define bfin_write_EMAC_RXC_BROAD(val)       bfin_write32(EMAC_RXC_BROAD,val)
+#define bfin_read_EMAC_RXC_LNERRI()          bfin_read32(EMAC_RXC_LNERRI)
+#define bfin_write_EMAC_RXC_LNERRI(val)      bfin_write32(EMAC_RXC_LNERRI,val)
+#define bfin_read_EMAC_RXC_LNERRO()          bfin_read32(EMAC_RXC_LNERRO)
+#define bfin_write_EMAC_RXC_LNERRO(val)      bfin_write32(EMAC_RXC_LNERRO,val)
+#define bfin_read_EMAC_RXC_LONG()            bfin_read32(EMAC_RXC_LONG)
+#define bfin_write_EMAC_RXC_LONG(val)        bfin_write32(EMAC_RXC_LONG,val)
+#define bfin_read_EMAC_RXC_MACCTL()          bfin_read32(EMAC_RXC_MACCTL)
+#define bfin_write_EMAC_RXC_MACCTL(val)      bfin_write32(EMAC_RXC_MACCTL,val)
+#define bfin_read_EMAC_RXC_OPCODE()          bfin_read32(EMAC_RXC_OPCODE)
+#define bfin_write_EMAC_RXC_OPCODE(val)      bfin_write32(EMAC_RXC_OPCODE,val)
+#define bfin_read_EMAC_RXC_PAUSE()           bfin_read32(EMAC_RXC_PAUSE)
+#define bfin_write_EMAC_RXC_PAUSE(val)       bfin_write32(EMAC_RXC_PAUSE,val)
+#define bfin_read_EMAC_RXC_ALLFRM()          bfin_read32(EMAC_RXC_ALLFRM)
+#define bfin_write_EMAC_RXC_ALLFRM(val)      bfin_write32(EMAC_RXC_ALLFRM,val)
+#define bfin_read_EMAC_RXC_ALLOCT()          bfin_read32(EMAC_RXC_ALLOCT)
+#define bfin_write_EMAC_RXC_ALLOCT(val)      bfin_write32(EMAC_RXC_ALLOCT,val)
+#define bfin_read_EMAC_RXC_TYPED()           bfin_read32(EMAC_RXC_TYPED)
+#define bfin_write_EMAC_RXC_TYPED(val)       bfin_write32(EMAC_RXC_TYPED,val)
+#define bfin_read_EMAC_RXC_SHORT()           bfin_read32(EMAC_RXC_SHORT)
+#define bfin_write_EMAC_RXC_SHORT(val)       bfin_write32(EMAC_RXC_SHORT,val)
+#define bfin_read_EMAC_RXC_EQ64()            bfin_read32(EMAC_RXC_EQ64)
+#define bfin_write_EMAC_RXC_EQ64(val)        bfin_write32(EMAC_RXC_EQ64,val)
+#define bfin_read_EMAC_RXC_LT128()           bfin_read32(EMAC_RXC_LT128)
+#define bfin_write_EMAC_RXC_LT128(val)       bfin_write32(EMAC_RXC_LT128,val)
+#define bfin_read_EMAC_RXC_LT256()           bfin_read32(EMAC_RXC_LT256)
+#define bfin_write_EMAC_RXC_LT256(val)       bfin_write32(EMAC_RXC_LT256,val)
+#define bfin_read_EMAC_RXC_LT512()           bfin_read32(EMAC_RXC_LT512)
+#define bfin_write_EMAC_RXC_LT512(val)       bfin_write32(EMAC_RXC_LT512,val)
+#define bfin_read_EMAC_RXC_LT1024()          bfin_read32(EMAC_RXC_LT1024)
+#define bfin_write_EMAC_RXC_LT1024(val)      bfin_write32(EMAC_RXC_LT1024,val)
+#define bfin_read_EMAC_RXC_GE1024()          bfin_read32(EMAC_RXC_GE1024)
+#define bfin_write_EMAC_RXC_GE1024(val)      bfin_write32(EMAC_RXC_GE1024,val)
+
+#define bfin_read_EMAC_TXC_OK()              bfin_read32(EMAC_TXC_OK)
+#define bfin_write_EMAC_TXC_OK(val)          bfin_write32(EMAC_TXC_OK,val)
+#define bfin_read_EMAC_TXC_1COL()            bfin_read32(EMAC_TXC_1COL)
+#define bfin_write_EMAC_TXC_1COL(val)        bfin_write32(EMAC_TXC_1COL,val)
+#define bfin_read_EMAC_TXC_GT1COL()          bfin_read32(EMAC_TXC_GT1COL)
+#define bfin_write_EMAC_TXC_GT1COL(val)      bfin_write32(EMAC_TXC_GT1COL,val)
+#define bfin_read_EMAC_TXC_OCTET()           bfin_read32(EMAC_TXC_OCTET)
+#define bfin_write_EMAC_TXC_OCTET(val)       bfin_write32(EMAC_TXC_OCTET,val)
+#define bfin_read_EMAC_TXC_DEFER()           bfin_read32(EMAC_TXC_DEFER)
+#define bfin_write_EMAC_TXC_DEFER(val)       bfin_write32(EMAC_TXC_DEFER,val)
+#define bfin_read_EMAC_TXC_LATECL()          bfin_read32(EMAC_TXC_LATECL)
+#define bfin_write_EMAC_TXC_LATECL(val)      bfin_write32(EMAC_TXC_LATECL,val)
+#define bfin_read_EMAC_TXC_XS_COL()          bfin_read32(EMAC_TXC_XS_COL)
+#define bfin_write_EMAC_TXC_XS_COL(val)      bfin_write32(EMAC_TXC_XS_COL,val)
+#define bfin_read_EMAC_TXC_DMAUND()          bfin_read32(EMAC_TXC_DMAUND)
+#define bfin_write_EMAC_TXC_DMAUND(val)      bfin_write32(EMAC_TXC_DMAUND,val)
+#define bfin_read_EMAC_TXC_CRSERR()          bfin_read32(EMAC_TXC_CRSERR)
+#define bfin_write_EMAC_TXC_CRSERR(val)      bfin_write32(EMAC_TXC_CRSERR,val)
+#define bfin_read_EMAC_TXC_UNICST()          bfin_read32(EMAC_TXC_UNICST)
+#define bfin_write_EMAC_TXC_UNICST(val)      bfin_write32(EMAC_TXC_UNICST,val)
+#define bfin_read_EMAC_TXC_MULTI()           bfin_read32(EMAC_TXC_MULTI)
+#define bfin_write_EMAC_TXC_MULTI(val)       bfin_write32(EMAC_TXC_MULTI,val)
+#define bfin_read_EMAC_TXC_BROAD()           bfin_read32(EMAC_TXC_BROAD)
+#define bfin_write_EMAC_TXC_BROAD(val)       bfin_write32(EMAC_TXC_BROAD,val)
+#define bfin_read_EMAC_TXC_XS_DFR()          bfin_read32(EMAC_TXC_XS_DFR)
+#define bfin_write_EMAC_TXC_XS_DFR(val)      bfin_write32(EMAC_TXC_XS_DFR,val)
+#define bfin_read_EMAC_TXC_MACCTL()          bfin_read32(EMAC_TXC_MACCTL)
+#define bfin_write_EMAC_TXC_MACCTL(val)      bfin_write32(EMAC_TXC_MACCTL,val)
+#define bfin_read_EMAC_TXC_ALLFRM()          bfin_read32(EMAC_TXC_ALLFRM)
+#define bfin_write_EMAC_TXC_ALLFRM(val)      bfin_write32(EMAC_TXC_ALLFRM,val)
+#define bfin_read_EMAC_TXC_ALLOCT()          bfin_read32(EMAC_TXC_ALLOCT)
+#define bfin_write_EMAC_TXC_ALLOCT(val)      bfin_write32(EMAC_TXC_ALLOCT,val)
+#define bfin_read_EMAC_TXC_EQ64()            bfin_read32(EMAC_TXC_EQ64)
+#define bfin_write_EMAC_TXC_EQ64(val)        bfin_write32(EMAC_TXC_EQ64,val)
+#define bfin_read_EMAC_TXC_LT128()           bfin_read32(EMAC_TXC_LT128)
+#define bfin_write_EMAC_TXC_LT128(val)       bfin_write32(EMAC_TXC_LT128,val)
+#define bfin_read_EMAC_TXC_LT256()           bfin_read32(EMAC_TXC_LT256)
+#define bfin_write_EMAC_TXC_LT256(val)       bfin_write32(EMAC_TXC_LT256,val)
+#define bfin_read_EMAC_TXC_LT512()           bfin_read32(EMAC_TXC_LT512)
+#define bfin_write_EMAC_TXC_LT512(val)       bfin_write32(EMAC_TXC_LT512,val)
+#define bfin_read_EMAC_TXC_LT1024()          bfin_read32(EMAC_TXC_LT1024)
+#define bfin_write_EMAC_TXC_LT1024(val)      bfin_write32(EMAC_TXC_LT1024,val)
+#define bfin_read_EMAC_TXC_GE1024()          bfin_read32(EMAC_TXC_GE1024)
+#define bfin_write_EMAC_TXC_GE1024(val)      bfin_write32(EMAC_TXC_GE1024,val)
+#define bfin_read_EMAC_TXC_ABORT()           bfin_read32(EMAC_TXC_ABORT)
+#define bfin_write_EMAC_TXC_ABORT(val)       bfin_write32(EMAC_TXC_ABORT,val)
+
+#endif				/* _CDEF_BF537_H */
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
new file mode 100644
index 00000000000..a3227f9003f
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -0,0 +1,2527 @@
+/*
+ * File:         include/asm-blackfin/mach-bf537/cdefBF537.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF534_H
+#define _DEF_BF534_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/************************************************************************************
+** System MMR Register Map
+*************************************************************************************/
+/* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
+#define PLL_CTL				0xFFC00000	/* PLL Control Register                                         */
+#define PLL_DIV				0xFFC00004	/* PLL Divide Register                                          */
+#define VR_CTL				0xFFC00008	/* Voltage Regulator Control Register           */
+#define PLL_STAT			0xFFC0000C	/* PLL Status Register                                          */
+#define PLL_LOCKCNT			0xFFC00010	/* PLL Lock Count Register                                      */
+#define CHIPID				0xFFC00014      /* Chip ID Register                                             */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF)							*/
+#define SWRST				0xFFC00100	/* Software Reset Register                                      */
+#define SYSCR				0xFFC00104	/* System Configuration Register                        */
+#define SIC_RVECT			0xFFC00108	/* Interrupt Reset Vector Address Register      */
+#define SIC_IMASK			0xFFC0010C	/* Interrupt Mask Register                                      */
+#define SIC_IAR0			0xFFC00110	/* Interrupt Assignment Register 0                      */
+#define SIC_IAR1			0xFFC00114	/* Interrupt Assignment Register 1                      */
+#define SIC_IAR2			0xFFC00118	/* Interrupt Assignment Register 2                      */
+#define SIC_IAR3			0xFFC0011C	/* Interrupt Assignment Register 3                      */
+#define SIC_ISR				0xFFC00120	/* Interrupt Status Register                            */
+#define SIC_IWR				0xFFC00124	/* Interrupt Wakeup Register                            */
+
+/* Watchdog Timer			(0xFFC00200 - 0xFFC002FF)								*/
+#define WDOG_CTL			0xFFC00200	/* Watchdog Control Register                            */
+#define WDOG_CNT			0xFFC00204	/* Watchdog Count Register                                      */
+#define WDOG_STAT			0xFFC00208	/* Watchdog Status Register                                     */
+
+/* Real Time Clock		(0xFFC00300 - 0xFFC003FF)									*/
+#define RTC_STAT			0xFFC00300	/* RTC Status Register                                          */
+#define RTC_ICTL			0xFFC00304	/* RTC Interrupt Control Register                       */
+#define RTC_ISTAT			0xFFC00308	/* RTC Interrupt Status Register                        */
+#define RTC_SWCNT			0xFFC0030C	/* RTC Stopwatch Count Register                         */
+#define RTC_ALARM			0xFFC00310	/* RTC Alarm Time Register                                      */
+#define RTC_FAST			0xFFC00314	/* RTC Prescaler Enable Register                        */
+#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Alternate Macro         */
+
+/* UART0 Controller		(0xFFC00400 - 0xFFC004FF)									*/
+#define UART0_THR			0xFFC00400	/* Transmit Holding register                            */
+#define UART0_RBR			0xFFC00400	/* Receive Buffer register                                      */
+#define UART0_DLL			0xFFC00400	/* Divisor Latch (Low-Byte)                                     */
+#define UART0_IER			0xFFC00404	/* Interrupt Enable Register                            */
+#define UART0_DLH			0xFFC00404	/* Divisor Latch (High-Byte)                            */
+#define UART0_IIR			0xFFC00408	/* Interrupt Identification Register            */
+#define UART0_LCR			0xFFC0040C	/* Line Control Register                                        */
+#define UART0_MCR			0xFFC00410	/* Modem Control Register                                       */
+#define UART0_LSR			0xFFC00414	/* Line Status Register                                         */
+#define UART0_MSR			0xFFC00418	/* Modem Status Register                                        */
+#define UART0_SCR			0xFFC0041C	/* SCR Scratch Register                                         */
+#define UART0_GCTL			0xFFC00424	/* Global Control Register                                      */
+
+/* SPI Controller			(0xFFC00500 - 0xFFC005FF)								*/
+#define SPI0_REGBASE			0xFFC00500
+#define SPI_CTL				0xFFC00500	/* SPI Control Register                                         */
+#define SPI_FLG				0xFFC00504	/* SPI Flag register                                            */
+#define SPI_STAT			0xFFC00508	/* SPI Status register                                          */
+#define SPI_TDBR			0xFFC0050C	/* SPI Transmit Data Buffer Register            */
+#define SPI_RDBR			0xFFC00510	/* SPI Receive Data Buffer Register                     */
+#define SPI_BAUD			0xFFC00514	/* SPI Baud rate Register                                       */
+#define SPI_SHADOW			0xFFC00518	/* SPI_RDBR Shadow Register                                     */
+
+/* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
+#define TIMER0_CONFIG		0xFFC00600	/* Timer 0 Configuration Register                       */
+#define TIMER0_COUNTER		0xFFC00604	/* Timer 0 Counter Register                                     */
+#define TIMER0_PERIOD		0xFFC00608	/* Timer 0 Period Register                                      */
+#define TIMER0_WIDTH		0xFFC0060C	/* Timer 0 Width Register                                       */
+
+#define TIMER1_CONFIG		0xFFC00610	/* Timer 1 Configuration Register                       */
+#define TIMER1_COUNTER		0xFFC00614	/* Timer 1 Counter Register                             */
+#define TIMER1_PERIOD		0xFFC00618	/* Timer 1 Period Register                              */
+#define TIMER1_WIDTH		0xFFC0061C	/* Timer 1 Width Register                               */
+
+#define TIMER2_CONFIG		0xFFC00620	/* Timer 2 Configuration Register                       */
+#define TIMER2_COUNTER		0xFFC00624	/* Timer 2 Counter Register                             */
+#define TIMER2_PERIOD		0xFFC00628	/* Timer 2 Period Register                              */
+#define TIMER2_WIDTH		0xFFC0062C	/* Timer 2 Width Register                               */
+
+#define TIMER3_CONFIG		0xFFC00630	/* Timer 3 Configuration Register                       */
+#define TIMER3_COUNTER		0xFFC00634	/* Timer 3 Counter Register                                     */
+#define TIMER3_PERIOD		0xFFC00638	/* Timer 3 Period Register                                      */
+#define TIMER3_WIDTH		0xFFC0063C	/* Timer 3 Width Register                                       */
+
+#define TIMER4_CONFIG		0xFFC00640	/* Timer 4 Configuration Register                       */
+#define TIMER4_COUNTER		0xFFC00644	/* Timer 4 Counter Register                             */
+#define TIMER4_PERIOD		0xFFC00648	/* Timer 4 Period Register                              */
+#define TIMER4_WIDTH		0xFFC0064C	/* Timer 4 Width Register                               */
+
+#define TIMER5_CONFIG		0xFFC00650	/* Timer 5 Configuration Register                       */
+#define TIMER5_COUNTER		0xFFC00654	/* Timer 5 Counter Register                             */
+#define TIMER5_PERIOD		0xFFC00658	/* Timer 5 Period Register                              */
+#define TIMER5_WIDTH		0xFFC0065C	/* Timer 5 Width Register                               */
+
+#define TIMER6_CONFIG		0xFFC00660	/* Timer 6 Configuration Register                       */
+#define TIMER6_COUNTER		0xFFC00664	/* Timer 6 Counter Register                             */
+#define TIMER6_PERIOD		0xFFC00668	/* Timer 6 Period Register                              */
+#define TIMER6_WIDTH		0xFFC0066C	/* Timer 6 Width Register                               */
+
+#define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register                       */
+#define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register                             */
+#define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register                              */
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register                               */
+
+#define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register                                        */
+#define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register                                       */
+#define TIMER_STATUS		0xFFC00688	/* Timer Status Register                                        */
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF)												*/
+#define PORTFIO					0xFFC00700	/* Port F I/O Pin State Specify Register                                */
+#define PORTFIO_CLEAR			0xFFC00704	/* Port F I/O Peripheral Interrupt Clear Register               */
+#define PORTFIO_SET				0xFFC00708	/* Port F I/O Peripheral Interrupt Set Register                 */
+#define PORTFIO_TOGGLE			0xFFC0070C	/* Port F I/O Pin State Toggle Register                                 */
+#define PORTFIO_MASKA			0xFFC00710	/* Port F I/O Mask State Specify Interrupt A Register   */
+#define PORTFIO_MASKA_CLEAR		0xFFC00714	/* Port F I/O Mask Disable Interrupt A Register                 */
+#define PORTFIO_MASKA_SET		0xFFC00718	/* Port F I/O Mask Enable Interrupt A Register                  */
+#define PORTFIO_MASKA_TOGGLE	0xFFC0071C	/* Port F I/O Mask Toggle Enable Interrupt A Register   */
+#define PORTFIO_MASKB			0xFFC00720	/* Port F I/O Mask State Specify Interrupt B Register   */
+#define PORTFIO_MASKB_CLEAR		0xFFC00724	/* Port F I/O Mask Disable Interrupt B Register                 */
+#define PORTFIO_MASKB_SET		0xFFC00728	/* Port F I/O Mask Enable Interrupt B Register                  */
+#define PORTFIO_MASKB_TOGGLE	0xFFC0072C	/* Port F I/O Mask Toggle Enable Interrupt B Register   */
+#define PORTFIO_DIR				0xFFC00730	/* Port F I/O Direction Register                                                */
+#define PORTFIO_POLAR			0xFFC00734	/* Port F I/O Source Polarity Register                                  */
+#define PORTFIO_EDGE			0xFFC00738	/* Port F I/O Source Sensitivity Register                               */
+#define PORTFIO_BOTH			0xFFC0073C	/* Port F I/O Set on BOTH Edges Register                                */
+#define PORTFIO_INEN			0xFFC00740	/* Port F I/O Input Enable Register                                     */
+
+/* SPORT0 Controller		(0xFFC00800 - 0xFFC008FF)										*/
+#define SPORT0_TCR1			0xFFC00800	/* SPORT0 Transmit Configuration 1 Register                     */
+#define SPORT0_TCR2			0xFFC00804	/* SPORT0 Transmit Configuration 2 Register                     */
+#define SPORT0_TCLKDIV		0xFFC00808	/* SPORT0 Transmit Clock Divider                                        */
+#define SPORT0_TFSDIV		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider                           */
+#define SPORT0_TX			0xFFC00810	/* SPORT0 TX Data Register                                                      */
+#define SPORT0_RX			0xFFC00818	/* SPORT0 RX Data Register                                                      */
+#define SPORT0_RCR1			0xFFC00820	/* SPORT0 Transmit Configuration 1 Register                     */
+#define SPORT0_RCR2			0xFFC00824	/* SPORT0 Transmit Configuration 2 Register                     */
+#define SPORT0_RCLKDIV		0xFFC00828	/* SPORT0 Receive Clock Divider                                         */
+#define SPORT0_RFSDIV		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider                            */
+#define SPORT0_STAT			0xFFC00830	/* SPORT0 Status Register                                                       */
+#define SPORT0_CHNL			0xFFC00834	/* SPORT0 Current Channel Register                                      */
+#define SPORT0_MCMC1		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1        */
+#define SPORT0_MCMC2		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2        */
+#define SPORT0_MTCS0		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0      */
+#define SPORT0_MTCS1		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1      */
+#define SPORT0_MTCS2		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2      */
+#define SPORT0_MTCS3		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3      */
+#define SPORT0_MRCS0		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0       */
+#define SPORT0_MRCS1		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1       */
+#define SPORT0_MRCS2		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2       */
+#define SPORT0_MRCS3		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3       */
+
+/* SPORT1 Controller		(0xFFC00900 - 0xFFC009FF)										*/
+#define SPORT1_TCR1			0xFFC00900	/* SPORT1 Transmit Configuration 1 Register                     */
+#define SPORT1_TCR2			0xFFC00904	/* SPORT1 Transmit Configuration 2 Register                     */
+#define SPORT1_TCLKDIV		0xFFC00908	/* SPORT1 Transmit Clock Divider                                        */
+#define SPORT1_TFSDIV		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider                           */
+#define SPORT1_TX			0xFFC00910	/* SPORT1 TX Data Register                                                      */
+#define SPORT1_RX			0xFFC00918	/* SPORT1 RX Data Register                                                      */
+#define SPORT1_RCR1			0xFFC00920	/* SPORT1 Transmit Configuration 1 Register                     */
+#define SPORT1_RCR2			0xFFC00924	/* SPORT1 Transmit Configuration 2 Register                     */
+#define SPORT1_RCLKDIV		0xFFC00928	/* SPORT1 Receive Clock Divider                                         */
+#define SPORT1_RFSDIV		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider                            */
+#define SPORT1_STAT			0xFFC00930	/* SPORT1 Status Register                                                       */
+#define SPORT1_CHNL			0xFFC00934	/* SPORT1 Current Channel Register                                      */
+#define SPORT1_MCMC1		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1        */
+#define SPORT1_MCMC2		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2        */
+#define SPORT1_MTCS0		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0      */
+#define SPORT1_MTCS1		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1      */
+#define SPORT1_MTCS2		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2      */
+#define SPORT1_MTCS3		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3      */
+#define SPORT1_MRCS0		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0       */
+#define SPORT1_MRCS1		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1       */
+#define SPORT1_MRCS2		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2       */
+#define SPORT1_MRCS3		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3       */
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF)								*/
+#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register  */
+#define EBIU_AMBCTL0		0xFFC00A04	/* Asynchronous Memory Bank Control Register 0  */
+#define EBIU_AMBCTL1		0xFFC00A08	/* Asynchronous Memory Bank Control Register 1  */
+#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register                                */
+#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register                                  */
+#define EBIU_SDRRC			0xFFC00A18	/* SDRAM Refresh Rate Control Register                  */
+#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register                                                */
+
+/* DMA Traffic Control Registers													*/
+#define DMA_TC_PER			0xFFC00B0C	/* Traffic Control Periods Register			*/
+#define DMA_TC_CNT			0xFFC00B10	/* Traffic Control Current Counts Register	*/
+
+/* Alternate deprecated register names (below) provided for backwards code compatibility */
+#define DMA_TCPER			0xFFC00B0C	/* Traffic Control Periods Register			*/
+#define DMA_TCCNT			0xFFC00B10	/* Traffic Control Current Counts Register	*/
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF)															*/
+#define DMA0_NEXT_DESC_PTR		0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register               */
+#define DMA0_START_ADDR			0xFFC00C04	/* DMA Channel 0 Start Address Register                                 */
+#define DMA0_CONFIG				0xFFC00C08	/* DMA Channel 0 Configuration Register                                 */
+#define DMA0_X_COUNT			0xFFC00C10	/* DMA Channel 0 X Count Register                                               */
+#define DMA0_X_MODIFY			0xFFC00C14	/* DMA Channel 0 X Modify Register                                              */
+#define DMA0_Y_COUNT			0xFFC00C18	/* DMA Channel 0 Y Count Register                                               */
+#define DMA0_Y_MODIFY			0xFFC00C1C	/* DMA Channel 0 Y Modify Register                                              */
+#define DMA0_CURR_DESC_PTR		0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register    */
+#define DMA0_CURR_ADDR			0xFFC00C24	/* DMA Channel 0 Current Address Register                               */
+#define DMA0_IRQ_STATUS			0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register                              */
+#define DMA0_PERIPHERAL_MAP		0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register                                */
+#define DMA0_CURR_X_COUNT		0xFFC00C30	/* DMA Channel 0 Current X Count Register                               */
+#define DMA0_CURR_Y_COUNT		0xFFC00C38	/* DMA Channel 0 Current Y Count Register                               */
+
+#define DMA1_NEXT_DESC_PTR		0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register               */
+#define DMA1_START_ADDR			0xFFC00C44	/* DMA Channel 1 Start Address Register                                 */
+#define DMA1_CONFIG				0xFFC00C48	/* DMA Channel 1 Configuration Register                                 */
+#define DMA1_X_COUNT			0xFFC00C50	/* DMA Channel 1 X Count Register                                               */
+#define DMA1_X_MODIFY			0xFFC00C54	/* DMA Channel 1 X Modify Register                                              */
+#define DMA1_Y_COUNT			0xFFC00C58	/* DMA Channel 1 Y Count Register                                               */
+#define DMA1_Y_MODIFY			0xFFC00C5C	/* DMA Channel 1 Y Modify Register                                              */
+#define DMA1_CURR_DESC_PTR		0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register    */
+#define DMA1_CURR_ADDR			0xFFC00C64	/* DMA Channel 1 Current Address Register                               */
+#define DMA1_IRQ_STATUS			0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register                              */
+#define DMA1_PERIPHERAL_MAP		0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register                                */
+#define DMA1_CURR_X_COUNT		0xFFC00C70	/* DMA Channel 1 Current X Count Register                               */
+#define DMA1_CURR_Y_COUNT		0xFFC00C78	/* DMA Channel 1 Current Y Count Register                               */
+
+#define DMA2_NEXT_DESC_PTR		0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register               */
+#define DMA2_START_ADDR			0xFFC00C84	/* DMA Channel 2 Start Address Register                                 */
+#define DMA2_CONFIG				0xFFC00C88	/* DMA Channel 2 Configuration Register                                 */
+#define DMA2_X_COUNT			0xFFC00C90	/* DMA Channel 2 X Count Register                                               */
+#define DMA2_X_MODIFY			0xFFC00C94	/* DMA Channel 2 X Modify Register                                              */
+#define DMA2_Y_COUNT			0xFFC00C98	/* DMA Channel 2 Y Count Register                                               */
+#define DMA2_Y_MODIFY			0xFFC00C9C	/* DMA Channel 2 Y Modify Register                                              */
+#define DMA2_CURR_DESC_PTR		0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register    */
+#define DMA2_CURR_ADDR			0xFFC00CA4	/* DMA Channel 2 Current Address Register                               */
+#define DMA2_IRQ_STATUS			0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register                              */
+#define DMA2_PERIPHERAL_MAP		0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register                                */
+#define DMA2_CURR_X_COUNT		0xFFC00CB0	/* DMA Channel 2 Current X Count Register                               */
+#define DMA2_CURR_Y_COUNT		0xFFC00CB8	/* DMA Channel 2 Current Y Count Register                               */
+
+#define DMA3_NEXT_DESC_PTR		0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register               */
+#define DMA3_START_ADDR			0xFFC00CC4	/* DMA Channel 3 Start Address Register                                 */
+#define DMA3_CONFIG				0xFFC00CC8	/* DMA Channel 3 Configuration Register                                 */
+#define DMA3_X_COUNT			0xFFC00CD0	/* DMA Channel 3 X Count Register                                               */
+#define DMA3_X_MODIFY			0xFFC00CD4	/* DMA Channel 3 X Modify Register                                              */
+#define DMA3_Y_COUNT			0xFFC00CD8	/* DMA Channel 3 Y Count Register                                               */
+#define DMA3_Y_MODIFY			0xFFC00CDC	/* DMA Channel 3 Y Modify Register                                              */
+#define DMA3_CURR_DESC_PTR		0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register    */
+#define DMA3_CURR_ADDR			0xFFC00CE4	/* DMA Channel 3 Current Address Register                               */
+#define DMA3_IRQ_STATUS			0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register                              */
+#define DMA3_PERIPHERAL_MAP		0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register                                */
+#define DMA3_CURR_X_COUNT		0xFFC00CF0	/* DMA Channel 3 Current X Count Register                               */
+#define DMA3_CURR_Y_COUNT		0xFFC00CF8	/* DMA Channel 3 Current Y Count Register                               */
+
+#define DMA4_NEXT_DESC_PTR		0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register               */
+#define DMA4_START_ADDR			0xFFC00D04	/* DMA Channel 4 Start Address Register                                 */
+#define DMA4_CONFIG				0xFFC00D08	/* DMA Channel 4 Configuration Register                                 */
+#define DMA4_X_COUNT			0xFFC00D10	/* DMA Channel 4 X Count Register                                               */
+#define DMA4_X_MODIFY			0xFFC00D14	/* DMA Channel 4 X Modify Register                                              */
+#define DMA4_Y_COUNT			0xFFC00D18	/* DMA Channel 4 Y Count Register                                               */
+#define DMA4_Y_MODIFY			0xFFC00D1C	/* DMA Channel 4 Y Modify Register                                              */
+#define DMA4_CURR_DESC_PTR		0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register    */
+#define DMA4_CURR_ADDR			0xFFC00D24	/* DMA Channel 4 Current Address Register                               */
+#define DMA4_IRQ_STATUS			0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register                              */
+#define DMA4_PERIPHERAL_MAP		0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register                                */
+#define DMA4_CURR_X_COUNT		0xFFC00D30	/* DMA Channel 4 Current X Count Register                               */
+#define DMA4_CURR_Y_COUNT		0xFFC00D38	/* DMA Channel 4 Current Y Count Register                               */
+
+#define DMA5_NEXT_DESC_PTR		0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register               */
+#define DMA5_START_ADDR			0xFFC00D44	/* DMA Channel 5 Start Address Register                                 */
+#define DMA5_CONFIG				0xFFC00D48	/* DMA Channel 5 Configuration Register                                 */
+#define DMA5_X_COUNT			0xFFC00D50	/* DMA Channel 5 X Count Register                                               */
+#define DMA5_X_MODIFY			0xFFC00D54	/* DMA Channel 5 X Modify Register                                              */
+#define DMA5_Y_COUNT			0xFFC00D58	/* DMA Channel 5 Y Count Register                                               */
+#define DMA5_Y_MODIFY			0xFFC00D5C	/* DMA Channel 5 Y Modify Register                                              */
+#define DMA5_CURR_DESC_PTR		0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register    */
+#define DMA5_CURR_ADDR			0xFFC00D64	/* DMA Channel 5 Current Address Register                               */
+#define DMA5_IRQ_STATUS			0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register                              */
+#define DMA5_PERIPHERAL_MAP		0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register                                */
+#define DMA5_CURR_X_COUNT		0xFFC00D70	/* DMA Channel 5 Current X Count Register                               */
+#define DMA5_CURR_Y_COUNT		0xFFC00D78	/* DMA Channel 5 Current Y Count Register                               */
+
+#define DMA6_NEXT_DESC_PTR		0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register               */
+#define DMA6_START_ADDR			0xFFC00D84	/* DMA Channel 6 Start Address Register                                 */
+#define DMA6_CONFIG				0xFFC00D88	/* DMA Channel 6 Configuration Register                                 */
+#define DMA6_X_COUNT			0xFFC00D90	/* DMA Channel 6 X Count Register                                               */
+#define DMA6_X_MODIFY			0xFFC00D94	/* DMA Channel 6 X Modify Register                                              */
+#define DMA6_Y_COUNT			0xFFC00D98	/* DMA Channel 6 Y Count Register                                               */
+#define DMA6_Y_MODIFY			0xFFC00D9C	/* DMA Channel 6 Y Modify Register                                              */
+#define DMA6_CURR_DESC_PTR		0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register    */
+#define DMA6_CURR_ADDR			0xFFC00DA4	/* DMA Channel 6 Current Address Register                               */
+#define DMA6_IRQ_STATUS			0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register                              */
+#define DMA6_PERIPHERAL_MAP		0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register                                */
+#define DMA6_CURR_X_COUNT		0xFFC00DB0	/* DMA Channel 6 Current X Count Register                               */
+#define DMA6_CURR_Y_COUNT		0xFFC00DB8	/* DMA Channel 6 Current Y Count Register                               */
+
+#define DMA7_NEXT_DESC_PTR		0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register               */
+#define DMA7_START_ADDR			0xFFC00DC4	/* DMA Channel 7 Start Address Register                                 */
+#define DMA7_CONFIG				0xFFC00DC8	/* DMA Channel 7 Configuration Register                                 */
+#define DMA7_X_COUNT			0xFFC00DD0	/* DMA Channel 7 X Count Register                                               */
+#define DMA7_X_MODIFY			0xFFC00DD4	/* DMA Channel 7 X Modify Register                                              */
+#define DMA7_Y_COUNT			0xFFC00DD8	/* DMA Channel 7 Y Count Register                                               */
+#define DMA7_Y_MODIFY			0xFFC00DDC	/* DMA Channel 7 Y Modify Register                                              */
+#define DMA7_CURR_DESC_PTR		0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register    */
+#define DMA7_CURR_ADDR			0xFFC00DE4	/* DMA Channel 7 Current Address Register                               */
+#define DMA7_IRQ_STATUS			0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register                              */
+#define DMA7_PERIPHERAL_MAP		0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register                                */
+#define DMA7_CURR_X_COUNT		0xFFC00DF0	/* DMA Channel 7 Current X Count Register                               */
+#define DMA7_CURR_Y_COUNT		0xFFC00DF8	/* DMA Channel 7 Current Y Count Register                               */
+
+#define DMA8_NEXT_DESC_PTR		0xFFC00E00	/* DMA Channel 8 Next Descriptor Pointer Register               */
+#define DMA8_START_ADDR			0xFFC00E04	/* DMA Channel 8 Start Address Register                                 */
+#define DMA8_CONFIG				0xFFC00E08	/* DMA Channel 8 Configuration Register                                 */
+#define DMA8_X_COUNT			0xFFC00E10	/* DMA Channel 8 X Count Register                                               */
+#define DMA8_X_MODIFY			0xFFC00E14	/* DMA Channel 8 X Modify Register                                              */
+#define DMA8_Y_COUNT			0xFFC00E18	/* DMA Channel 8 Y Count Register                                               */
+#define DMA8_Y_MODIFY			0xFFC00E1C	/* DMA Channel 8 Y Modify Register                                              */
+#define DMA8_CURR_DESC_PTR		0xFFC00E20	/* DMA Channel 8 Current Descriptor Pointer Register    */
+#define DMA8_CURR_ADDR			0xFFC00E24	/* DMA Channel 8 Current Address Register                               */
+#define DMA8_IRQ_STATUS			0xFFC00E28	/* DMA Channel 8 Interrupt/Status Register                              */
+#define DMA8_PERIPHERAL_MAP		0xFFC00E2C	/* DMA Channel 8 Peripheral Map Register                                */
+#define DMA8_CURR_X_COUNT		0xFFC00E30	/* DMA Channel 8 Current X Count Register                               */
+#define DMA8_CURR_Y_COUNT		0xFFC00E38	/* DMA Channel 8 Current Y Count Register                               */
+
+#define DMA9_NEXT_DESC_PTR		0xFFC00E40	/* DMA Channel 9 Next Descriptor Pointer Register               */
+#define DMA9_START_ADDR			0xFFC00E44	/* DMA Channel 9 Start Address Register                                 */
+#define DMA9_CONFIG				0xFFC00E48	/* DMA Channel 9 Configuration Register                                 */
+#define DMA9_X_COUNT			0xFFC00E50	/* DMA Channel 9 X Count Register                                               */
+#define DMA9_X_MODIFY			0xFFC00E54	/* DMA Channel 9 X Modify Register                                              */
+#define DMA9_Y_COUNT			0xFFC00E58	/* DMA Channel 9 Y Count Register                                               */
+#define DMA9_Y_MODIFY			0xFFC00E5C	/* DMA Channel 9 Y Modify Register                                              */
+#define DMA9_CURR_DESC_PTR		0xFFC00E60	/* DMA Channel 9 Current Descriptor Pointer Register    */
+#define DMA9_CURR_ADDR			0xFFC00E64	/* DMA Channel 9 Current Address Register                               */
+#define DMA9_IRQ_STATUS			0xFFC00E68	/* DMA Channel 9 Interrupt/Status Register                              */
+#define DMA9_PERIPHERAL_MAP		0xFFC00E6C	/* DMA Channel 9 Peripheral Map Register                                */
+#define DMA9_CURR_X_COUNT		0xFFC00E70	/* DMA Channel 9 Current X Count Register                               */
+#define DMA9_CURR_Y_COUNT		0xFFC00E78	/* DMA Channel 9 Current Y Count Register                               */
+
+#define DMA10_NEXT_DESC_PTR		0xFFC00E80	/* DMA Channel 10 Next Descriptor Pointer Register              */
+#define DMA10_START_ADDR		0xFFC00E84	/* DMA Channel 10 Start Address Register                                */
+#define DMA10_CONFIG			0xFFC00E88	/* DMA Channel 10 Configuration Register                                */
+#define DMA10_X_COUNT			0xFFC00E90	/* DMA Channel 10 X Count Register                                              */
+#define DMA10_X_MODIFY			0xFFC00E94	/* DMA Channel 10 X Modify Register                                             */
+#define DMA10_Y_COUNT			0xFFC00E98	/* DMA Channel 10 Y Count Register                                              */
+#define DMA10_Y_MODIFY			0xFFC00E9C	/* DMA Channel 10 Y Modify Register                                             */
+#define DMA10_CURR_DESC_PTR		0xFFC00EA0	/* DMA Channel 10 Current Descriptor Pointer Register   */
+#define DMA10_CURR_ADDR			0xFFC00EA4	/* DMA Channel 10 Current Address Register                              */
+#define DMA10_IRQ_STATUS		0xFFC00EA8	/* DMA Channel 10 Interrupt/Status Register                             */
+#define DMA10_PERIPHERAL_MAP	0xFFC00EAC	/* DMA Channel 10 Peripheral Map Register                               */
+#define DMA10_CURR_X_COUNT		0xFFC00EB0	/* DMA Channel 10 Current X Count Register                              */
+#define DMA10_CURR_Y_COUNT		0xFFC00EB8	/* DMA Channel 10 Current Y Count Register                              */
+
+#define DMA11_NEXT_DESC_PTR		0xFFC00EC0	/* DMA Channel 11 Next Descriptor Pointer Register              */
+#define DMA11_START_ADDR		0xFFC00EC4	/* DMA Channel 11 Start Address Register                                */
+#define DMA11_CONFIG			0xFFC00EC8	/* DMA Channel 11 Configuration Register                                */
+#define DMA11_X_COUNT			0xFFC00ED0	/* DMA Channel 11 X Count Register                                              */
+#define DMA11_X_MODIFY			0xFFC00ED4	/* DMA Channel 11 X Modify Register                                             */
+#define DMA11_Y_COUNT			0xFFC00ED8	/* DMA Channel 11 Y Count Register                                              */
+#define DMA11_Y_MODIFY			0xFFC00EDC	/* DMA Channel 11 Y Modify Register                                             */
+#define DMA11_CURR_DESC_PTR		0xFFC00EE0	/* DMA Channel 11 Current Descriptor Pointer Register   */
+#define DMA11_CURR_ADDR			0xFFC00EE4	/* DMA Channel 11 Current Address Register                              */
+#define DMA11_IRQ_STATUS		0xFFC00EE8	/* DMA Channel 11 Interrupt/Status Register                             */
+#define DMA11_PERIPHERAL_MAP	0xFFC00EEC	/* DMA Channel 11 Peripheral Map Register                               */
+#define DMA11_CURR_X_COUNT		0xFFC00EF0	/* DMA Channel 11 Current X Count Register                              */
+#define DMA11_CURR_Y_COUNT		0xFFC00EF8	/* DMA Channel 11 Current Y Count Register                              */
+
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC00F00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register         */
+#define MDMA_D0_START_ADDR		0xFFC00F04	/* MemDMA Stream 0 Destination Start Address Register                           */
+#define MDMA_D0_CONFIG			0xFFC00F08	/* MemDMA Stream 0 Destination Configuration Register                           */
+#define MDMA_D0_X_COUNT			0xFFC00F10	/* MemDMA Stream 0 Destination X Count Register                                         */
+#define MDMA_D0_X_MODIFY		0xFFC00F14	/* MemDMA Stream 0 Destination X Modify Register                                        */
+#define MDMA_D0_Y_COUNT			0xFFC00F18	/* MemDMA Stream 0 Destination Y Count Register                                         */
+#define MDMA_D0_Y_MODIFY		0xFFC00F1C	/* MemDMA Stream 0 Destination Y Modify Register                                        */
+#define MDMA_D0_CURR_DESC_PTR	0xFFC00F20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register      */
+#define MDMA_D0_CURR_ADDR		0xFFC00F24	/* MemDMA Stream 0 Destination Current Address Register                         */
+#define MDMA_D0_IRQ_STATUS		0xFFC00F28	/* MemDMA Stream 0 Destination Interrupt/Status Register                        */
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC00F2C	/* MemDMA Stream 0 Destination Peripheral Map Register                          */
+#define MDMA_D0_CURR_X_COUNT	0xFFC00F30	/* MemDMA Stream 0 Destination Current X Count Register                         */
+#define MDMA_D0_CURR_Y_COUNT	0xFFC00F38	/* MemDMA Stream 0 Destination Current Y Count Register                         */
+
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC00F40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register                      */
+#define MDMA_S0_START_ADDR		0xFFC00F44	/* MemDMA Stream 0 Source Start Address Register                                        */
+#define MDMA_S0_CONFIG			0xFFC00F48	/* MemDMA Stream 0 Source Configuration Register                                        */
+#define MDMA_S0_X_COUNT			0xFFC00F50	/* MemDMA Stream 0 Source X Count Register                                                      */
+#define MDMA_S0_X_MODIFY		0xFFC00F54	/* MemDMA Stream 0 Source X Modify Register                                                     */
+#define MDMA_S0_Y_COUNT			0xFFC00F58	/* MemDMA Stream 0 Source Y Count Register                                                      */
+#define MDMA_S0_Y_MODIFY		0xFFC00F5C	/* MemDMA Stream 0 Source Y Modify Register                                                     */
+#define MDMA_S0_CURR_DESC_PTR	0xFFC00F60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register           */
+#define MDMA_S0_CURR_ADDR		0xFFC00F64	/* MemDMA Stream 0 Source Current Address Register                                      */
+#define MDMA_S0_IRQ_STATUS		0xFFC00F68	/* MemDMA Stream 0 Source Interrupt/Status Register                                     */
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC00F6C	/* MemDMA Stream 0 Source Peripheral Map Register                                       */
+#define MDMA_S0_CURR_X_COUNT	0xFFC00F70	/* MemDMA Stream 0 Source Current X Count Register                                      */
+#define MDMA_S0_CURR_Y_COUNT	0xFFC00F78	/* MemDMA Stream 0 Source Current Y Count Register                                      */
+
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC00F80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register         */
+#define MDMA_D1_START_ADDR		0xFFC00F84	/* MemDMA Stream 1 Destination Start Address Register                           */
+#define MDMA_D1_CONFIG			0xFFC00F88	/* MemDMA Stream 1 Destination Configuration Register                           */
+#define MDMA_D1_X_COUNT			0xFFC00F90	/* MemDMA Stream 1 Destination X Count Register                                         */
+#define MDMA_D1_X_MODIFY		0xFFC00F94	/* MemDMA Stream 1 Destination X Modify Register                                        */
+#define MDMA_D1_Y_COUNT			0xFFC00F98	/* MemDMA Stream 1 Destination Y Count Register                                         */
+#define MDMA_D1_Y_MODIFY		0xFFC00F9C	/* MemDMA Stream 1 Destination Y Modify Register                                        */
+#define MDMA_D1_CURR_DESC_PTR	0xFFC00FA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register      */
+#define MDMA_D1_CURR_ADDR		0xFFC00FA4	/* MemDMA Stream 1 Destination Current Address Register                         */
+#define MDMA_D1_IRQ_STATUS		0xFFC00FA8	/* MemDMA Stream 1 Destination Interrupt/Status Register                        */
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC00FAC	/* MemDMA Stream 1 Destination Peripheral Map Register                          */
+#define MDMA_D1_CURR_X_COUNT	0xFFC00FB0	/* MemDMA Stream 1 Destination Current X Count Register                         */
+#define MDMA_D1_CURR_Y_COUNT	0xFFC00FB8	/* MemDMA Stream 1 Destination Current Y Count Register                         */
+
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC00FC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register                      */
+#define MDMA_S1_START_ADDR		0xFFC00FC4	/* MemDMA Stream 1 Source Start Address Register                                        */
+#define MDMA_S1_CONFIG			0xFFC00FC8	/* MemDMA Stream 1 Source Configuration Register                                        */
+#define MDMA_S1_X_COUNT			0xFFC00FD0	/* MemDMA Stream 1 Source X Count Register                                                      */
+#define MDMA_S1_X_MODIFY		0xFFC00FD4	/* MemDMA Stream 1 Source X Modify Register                                                     */
+#define MDMA_S1_Y_COUNT			0xFFC00FD8	/* MemDMA Stream 1 Source Y Count Register                                                      */
+#define MDMA_S1_Y_MODIFY		0xFFC00FDC	/* MemDMA Stream 1 Source Y Modify Register                                                     */
+#define MDMA_S1_CURR_DESC_PTR	0xFFC00FE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register           */
+#define MDMA_S1_CURR_ADDR		0xFFC00FE4	/* MemDMA Stream 1 Source Current Address Register                                      */
+#define MDMA_S1_IRQ_STATUS		0xFFC00FE8	/* MemDMA Stream 1 Source Interrupt/Status Register                                     */
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC00FEC	/* MemDMA Stream 1 Source Peripheral Map Register                                       */
+#define MDMA_S1_CURR_X_COUNT	0xFFC00FF0	/* MemDMA Stream 1 Source Current X Count Register                                      */
+#define MDMA_S1_CURR_Y_COUNT	0xFFC00FF8	/* MemDMA Stream 1 Source Current Y Count Register                                      */
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF)				*/
+#define PPI_CONTROL			0xFFC01000	/* PPI Control Register                 */
+#define PPI_STATUS			0xFFC01004	/* PPI Status Register                  */
+#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register  */
+#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register             */
+#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register    */
+
+/* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
+#define TWI0_REGBASE			0xFFC01400
+#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register                        */
+#define TWI_CONTROL			0xFFC01404	/* TWI Control Register                                         */
+#define TWI_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register                          */
+#define TWI_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register                           */
+#define TWI_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register                          */
+#define TWI_MASTER_CTL		0xFFC01414	/* Master Mode Control Register                         */
+#define TWI_MASTER_STAT		0xFFC01418	/* Master Mode Status Register                          */
+#define TWI_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register                         */
+#define TWI_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register                        */
+#define TWI_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register           */
+#define TWI_FIFO_CTL		0xFFC01428	/* FIFO Control Register                                        */
+#define TWI_FIFO_STAT		0xFFC0142C	/* FIFO Status Register                                         */
+#define TWI_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register      */
+#define TWI_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register      */
+#define TWI_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register       */
+#define TWI_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register       */
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
+#define PORTGIO					0xFFC01500	/* Port G I/O Pin State Specify Register                                */
+#define PORTGIO_CLEAR			0xFFC01504	/* Port G I/O Peripheral Interrupt Clear Register               */
+#define PORTGIO_SET				0xFFC01508	/* Port G I/O Peripheral Interrupt Set Register                 */
+#define PORTGIO_TOGGLE			0xFFC0150C	/* Port G I/O Pin State Toggle Register                                 */
+#define PORTGIO_MASKA			0xFFC01510	/* Port G I/O Mask State Specify Interrupt A Register   */
+#define PORTGIO_MASKA_CLEAR		0xFFC01514	/* Port G I/O Mask Disable Interrupt A Register                 */
+#define PORTGIO_MASKA_SET		0xFFC01518	/* Port G I/O Mask Enable Interrupt A Register                  */
+#define PORTGIO_MASKA_TOGGLE	0xFFC0151C	/* Port G I/O Mask Toggle Enable Interrupt A Register   */
+#define PORTGIO_MASKB			0xFFC01520	/* Port G I/O Mask State Specify Interrupt B Register   */
+#define PORTGIO_MASKB_CLEAR		0xFFC01524	/* Port G I/O Mask Disable Interrupt B Register                 */
+#define PORTGIO_MASKB_SET		0xFFC01528	/* Port G I/O Mask Enable Interrupt B Register                  */
+#define PORTGIO_MASKB_TOGGLE	0xFFC0152C	/* Port G I/O Mask Toggle Enable Interrupt B Register   */
+#define PORTGIO_DIR				0xFFC01530	/* Port G I/O Direction Register                                                */
+#define PORTGIO_POLAR			0xFFC01534	/* Port G I/O Source Polarity Register                                  */
+#define PORTGIO_EDGE			0xFFC01538	/* Port G I/O Source Sensitivity Register                               */
+#define PORTGIO_BOTH			0xFFC0153C	/* Port G I/O Set on BOTH Edges Register                                */
+#define PORTGIO_INEN			0xFFC01540	/* Port G I/O Input Enable Register                                             */
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF)												*/
+#define PORTHIO					0xFFC01700	/* Port H I/O Pin State Specify Register                                */
+#define PORTHIO_CLEAR			0xFFC01704	/* Port H I/O Peripheral Interrupt Clear Register               */
+#define PORTHIO_SET				0xFFC01708	/* Port H I/O Peripheral Interrupt Set Register                 */
+#define PORTHIO_TOGGLE			0xFFC0170C	/* Port H I/O Pin State Toggle Register                                 */
+#define PORTHIO_MASKA			0xFFC01710	/* Port H I/O Mask State Specify Interrupt A Register   */
+#define PORTHIO_MASKA_CLEAR		0xFFC01714	/* Port H I/O Mask Disable Interrupt A Register                 */
+#define PORTHIO_MASKA_SET		0xFFC01718	/* Port H I/O Mask Enable Interrupt A Register                  */
+#define PORTHIO_MASKA_TOGGLE	0xFFC0171C	/* Port H I/O Mask Toggle Enable Interrupt A Register   */
+#define PORTHIO_MASKB			0xFFC01720	/* Port H I/O Mask State Specify Interrupt B Register   */
+#define PORTHIO_MASKB_CLEAR		0xFFC01724	/* Port H I/O Mask Disable Interrupt B Register                 */
+#define PORTHIO_MASKB_SET		0xFFC01728	/* Port H I/O Mask Enable Interrupt B Register                  */
+#define PORTHIO_MASKB_TOGGLE	0xFFC0172C	/* Port H I/O Mask Toggle Enable Interrupt B Register   */
+#define PORTHIO_DIR				0xFFC01730	/* Port H I/O Direction Register                                                */
+#define PORTHIO_POLAR			0xFFC01734	/* Port H I/O Source Polarity Register                                  */
+#define PORTHIO_EDGE			0xFFC01738	/* Port H I/O Source Sensitivity Register                               */
+#define PORTHIO_BOTH			0xFFC0173C	/* Port H I/O Set on BOTH Edges Register                                */
+#define PORTHIO_INEN			0xFFC01740	/* Port H I/O Input Enable Register                                             */
+
+/* UART1 Controller		(0xFFC02000 - 0xFFC020FF)								*/
+#define UART1_THR			0xFFC02000	/* Transmit Holding register                    */
+#define UART1_RBR			0xFFC02000	/* Receive Buffer register                              */
+#define UART1_DLL			0xFFC02000	/* Divisor Latch (Low-Byte)                             */
+#define UART1_IER			0xFFC02004	/* Interrupt Enable Register                    */
+#define UART1_DLH			0xFFC02004	/* Divisor Latch (High-Byte)                    */
+#define UART1_IIR			0xFFC02008	/* Interrupt Identification Register    */
+#define UART1_LCR			0xFFC0200C	/* Line Control Register                                */
+#define UART1_MCR			0xFFC02010	/* Modem Control Register                               */
+#define UART1_LSR			0xFFC02014	/* Line Status Register                                 */
+#define UART1_MSR			0xFFC02018	/* Modem Status Register                                */
+#define UART1_SCR			0xFFC0201C	/* SCR Scratch Register                                 */
+#define UART1_GCTL			0xFFC02024	/* Global Control Register                              */
+
+/* CAN Controller		(0xFFC02A00 - 0xFFC02FFF)										*/
+/* For Mailboxes 0-15																	*/
+#define CAN_MC1				0xFFC02A00	/* Mailbox config reg 1                                                 */
+#define CAN_MD1				0xFFC02A04	/* Mailbox direction reg 1                                              */
+#define CAN_TRS1			0xFFC02A08	/* Transmit Request Set reg 1                                   */
+#define CAN_TRR1			0xFFC02A0C	/* Transmit Request Reset reg 1                                 */
+#define CAN_TA1				0xFFC02A10	/* Transmit Acknowledge reg 1                                   */
+#define CAN_AA1				0xFFC02A14	/* Transmit Abort Acknowledge reg 1                             */
+#define CAN_RMP1			0xFFC02A18	/* Receive Message Pending reg 1                                */
+#define CAN_RML1			0xFFC02A1C	/* Receive Message Lost reg 1                                   */
+#define CAN_MBTIF1			0xFFC02A20	/* Mailbox Transmit Interrupt Flag reg 1                */
+#define CAN_MBRIF1			0xFFC02A24	/* Mailbox Receive  Interrupt Flag reg 1                */
+#define CAN_MBIM1			0xFFC02A28	/* Mailbox Interrupt Mask reg 1                                 */
+#define CAN_RFH1			0xFFC02A2C	/* Remote Frame Handling reg 1                                  */
+#define CAN_OPSS1			0xFFC02A30	/* Overwrite Protection Single Shot Xmit reg 1  */
+
+/* For Mailboxes 16-31   																*/
+#define CAN_MC2				0xFFC02A40	/* Mailbox config reg 2                                                 */
+#define CAN_MD2				0xFFC02A44	/* Mailbox direction reg 2                                              */
+#define CAN_TRS2			0xFFC02A48	/* Transmit Request Set reg 2                                   */
+#define CAN_TRR2			0xFFC02A4C	/* Transmit Request Reset reg 2                                 */
+#define CAN_TA2				0xFFC02A50	/* Transmit Acknowledge reg 2                                   */
+#define CAN_AA2				0xFFC02A54	/* Transmit Abort Acknowledge reg 2                             */
+#define CAN_RMP2			0xFFC02A58	/* Receive Message Pending reg 2                                */
+#define CAN_RML2			0xFFC02A5C	/* Receive Message Lost reg 2                                   */
+#define CAN_MBTIF2			0xFFC02A60	/* Mailbox Transmit Interrupt Flag reg 2                */
+#define CAN_MBRIF2			0xFFC02A64	/* Mailbox Receive  Interrupt Flag reg 2                */
+#define CAN_MBIM2			0xFFC02A68	/* Mailbox Interrupt Mask reg 2                                 */
+#define CAN_RFH2			0xFFC02A6C	/* Remote Frame Handling reg 2                                  */
+#define CAN_OPSS2			0xFFC02A70	/* Overwrite Protection Single Shot Xmit reg 2  */
+
+/* CAN Configuration, Control, and Status Registers										*/
+#define CAN_CLOCK			0xFFC02A80	/* Bit Timing Configuration register 0                  */
+#define CAN_TIMING			0xFFC02A84	/* Bit Timing Configuration register 1                  */
+#define CAN_DEBUG			0xFFC02A88	/* Debug Register                                                               */
+#define CAN_STATUS			0xFFC02A8C	/* Global Status Register                                               */
+#define CAN_CEC				0xFFC02A90	/* Error Counter Register                                               */
+#define CAN_GIS				0xFFC02A94	/* Global Interrupt Status Register                             */
+#define CAN_GIM				0xFFC02A98	/* Global Interrupt Mask Register                               */
+#define CAN_GIF				0xFFC02A9C	/* Global Interrupt Flag Register                               */
+#define CAN_CONTROL			0xFFC02AA0	/* Master Control Register                                              */
+#define CAN_INTR			0xFFC02AA4	/* Interrupt Pending Register                                   */
+
+#define CAN_MBTD			0xFFC02AAC	/* Mailbox Temporary Disable Feature                    */
+#define CAN_EWR				0xFFC02AB0	/* Programmable Warning Level                                   */
+#define CAN_ESR				0xFFC02AB4	/* Error Status Register                                                */
+#define CAN_UCREG			0xFFC02AC0	/* Universal Counter Register/Capture Register  */
+#define CAN_UCCNT			0xFFC02AC4	/* Universal Counter                                                    */
+#define CAN_UCRC			0xFFC02AC8	/* Universal Counter Force Reload Register              */
+#define CAN_UCCNF			0xFFC02ACC	/* Universal Counter Configuration Register             */
+
+/* Mailbox Acceptance Masks 												*/
+#define CAN_AM00L			0xFFC02B00	/* Mailbox 0 Low Acceptance Mask        */
+#define CAN_AM00H			0xFFC02B04	/* Mailbox 0 High Acceptance Mask       */
+#define CAN_AM01L			0xFFC02B08	/* Mailbox 1 Low Acceptance Mask        */
+#define CAN_AM01H			0xFFC02B0C	/* Mailbox 1 High Acceptance Mask       */
+#define CAN_AM02L			0xFFC02B10	/* Mailbox 2 Low Acceptance Mask        */
+#define CAN_AM02H			0xFFC02B14	/* Mailbox 2 High Acceptance Mask       */
+#define CAN_AM03L			0xFFC02B18	/* Mailbox 3 Low Acceptance Mask        */
+#define CAN_AM03H			0xFFC02B1C	/* Mailbox 3 High Acceptance Mask       */
+#define CAN_AM04L			0xFFC02B20	/* Mailbox 4 Low Acceptance Mask        */
+#define CAN_AM04H			0xFFC02B24	/* Mailbox 4 High Acceptance Mask       */
+#define CAN_AM05L			0xFFC02B28	/* Mailbox 5 Low Acceptance Mask        */
+#define CAN_AM05H			0xFFC02B2C	/* Mailbox 5 High Acceptance Mask       */
+#define CAN_AM06L			0xFFC02B30	/* Mailbox 6 Low Acceptance Mask        */
+#define CAN_AM06H			0xFFC02B34	/* Mailbox 6 High Acceptance Mask       */
+#define CAN_AM07L			0xFFC02B38	/* Mailbox 7 Low Acceptance Mask        */
+#define CAN_AM07H			0xFFC02B3C	/* Mailbox 7 High Acceptance Mask       */
+#define CAN_AM08L			0xFFC02B40	/* Mailbox 8 Low Acceptance Mask        */
+#define CAN_AM08H			0xFFC02B44	/* Mailbox 8 High Acceptance Mask       */
+#define CAN_AM09L			0xFFC02B48	/* Mailbox 9 Low Acceptance Mask        */
+#define CAN_AM09H			0xFFC02B4C	/* Mailbox 9 High Acceptance Mask       */
+#define CAN_AM10L			0xFFC02B50	/* Mailbox 10 Low Acceptance Mask       */
+#define CAN_AM10H			0xFFC02B54	/* Mailbox 10 High Acceptance Mask      */
+#define CAN_AM11L			0xFFC02B58	/* Mailbox 11 Low Acceptance Mask       */
+#define CAN_AM11H			0xFFC02B5C	/* Mailbox 11 High Acceptance Mask      */
+#define CAN_AM12L			0xFFC02B60	/* Mailbox 12 Low Acceptance Mask       */
+#define CAN_AM12H			0xFFC02B64	/* Mailbox 12 High Acceptance Mask      */
+#define CAN_AM13L			0xFFC02B68	/* Mailbox 13 Low Acceptance Mask       */
+#define CAN_AM13H			0xFFC02B6C	/* Mailbox 13 High Acceptance Mask      */
+#define CAN_AM14L			0xFFC02B70	/* Mailbox 14 Low Acceptance Mask       */
+#define CAN_AM14H			0xFFC02B74	/* Mailbox 14 High Acceptance Mask      */
+#define CAN_AM15L			0xFFC02B78	/* Mailbox 15 Low Acceptance Mask       */
+#define CAN_AM15H			0xFFC02B7C	/* Mailbox 15 High Acceptance Mask      */
+
+#define CAN_AM16L			0xFFC02B80	/* Mailbox 16 Low Acceptance Mask       */
+#define CAN_AM16H			0xFFC02B84	/* Mailbox 16 High Acceptance Mask      */
+#define CAN_AM17L			0xFFC02B88	/* Mailbox 17 Low Acceptance Mask       */
+#define CAN_AM17H			0xFFC02B8C	/* Mailbox 17 High Acceptance Mask      */
+#define CAN_AM18L			0xFFC02B90	/* Mailbox 18 Low Acceptance Mask       */
+#define CAN_AM18H			0xFFC02B94	/* Mailbox 18 High Acceptance Mask      */
+#define CAN_AM19L			0xFFC02B98	/* Mailbox 19 Low Acceptance Mask       */
+#define CAN_AM19H			0xFFC02B9C	/* Mailbox 19 High Acceptance Mask      */
+#define CAN_AM20L			0xFFC02BA0	/* Mailbox 20 Low Acceptance Mask       */
+#define CAN_AM20H			0xFFC02BA4	/* Mailbox 20 High Acceptance Mask      */
+#define CAN_AM21L			0xFFC02BA8	/* Mailbox 21 Low Acceptance Mask       */
+#define CAN_AM21H			0xFFC02BAC	/* Mailbox 21 High Acceptance Mask      */
+#define CAN_AM22L			0xFFC02BB0	/* Mailbox 22 Low Acceptance Mask       */
+#define CAN_AM22H			0xFFC02BB4	/* Mailbox 22 High Acceptance Mask      */
+#define CAN_AM23L			0xFFC02BB8	/* Mailbox 23 Low Acceptance Mask       */
+#define CAN_AM23H			0xFFC02BBC	/* Mailbox 23 High Acceptance Mask      */
+#define CAN_AM24L			0xFFC02BC0	/* Mailbox 24 Low Acceptance Mask       */
+#define CAN_AM24H			0xFFC02BC4	/* Mailbox 24 High Acceptance Mask      */
+#define CAN_AM25L			0xFFC02BC8	/* Mailbox 25 Low Acceptance Mask       */
+#define CAN_AM25H			0xFFC02BCC	/* Mailbox 25 High Acceptance Mask      */
+#define CAN_AM26L			0xFFC02BD0	/* Mailbox 26 Low Acceptance Mask       */
+#define CAN_AM26H			0xFFC02BD4	/* Mailbox 26 High Acceptance Mask      */
+#define CAN_AM27L			0xFFC02BD8	/* Mailbox 27 Low Acceptance Mask       */
+#define CAN_AM27H			0xFFC02BDC	/* Mailbox 27 High Acceptance Mask      */
+#define CAN_AM28L			0xFFC02BE0	/* Mailbox 28 Low Acceptance Mask       */
+#define CAN_AM28H			0xFFC02BE4	/* Mailbox 28 High Acceptance Mask      */
+#define CAN_AM29L			0xFFC02BE8	/* Mailbox 29 Low Acceptance Mask       */
+#define CAN_AM29H			0xFFC02BEC	/* Mailbox 29 High Acceptance Mask      */
+#define CAN_AM30L			0xFFC02BF0	/* Mailbox 30 Low Acceptance Mask       */
+#define CAN_AM30H			0xFFC02BF4	/* Mailbox 30 High Acceptance Mask      */
+#define CAN_AM31L			0xFFC02BF8	/* Mailbox 31 Low Acceptance Mask       */
+#define CAN_AM31H			0xFFC02BFC	/* Mailbox 31 High Acceptance Mask      */
+
+/* CAN Acceptance Mask Macros				*/
+#define CAN_AM_L(x)		(CAN_AM00L+((x)*0x8))
+#define CAN_AM_H(x)		(CAN_AM00H+((x)*0x8))
+
+/* Mailbox Registers																*/
+#define CAN_MB00_DATA0		0xFFC02C00	/* Mailbox 0 Data Word 0 [15:0] Register        */
+#define CAN_MB00_DATA1		0xFFC02C04	/* Mailbox 0 Data Word 1 [31:16] Register       */
+#define CAN_MB00_DATA2		0xFFC02C08	/* Mailbox 0 Data Word 2 [47:32] Register       */
+#define CAN_MB00_DATA3		0xFFC02C0C	/* Mailbox 0 Data Word 3 [63:48] Register       */
+#define CAN_MB00_LENGTH		0xFFC02C10	/* Mailbox 0 Data Length Code Register          */
+#define CAN_MB00_TIMESTAMP	0xFFC02C14	/* Mailbox 0 Time Stamp Value Register          */
+#define CAN_MB00_ID0		0xFFC02C18	/* Mailbox 0 Identifier Low Register            */
+#define CAN_MB00_ID1		0xFFC02C1C	/* Mailbox 0 Identifier High Register           */
+
+#define CAN_MB01_DATA0		0xFFC02C20	/* Mailbox 1 Data Word 0 [15:0] Register        */
+#define CAN_MB01_DATA1		0xFFC02C24	/* Mailbox 1 Data Word 1 [31:16] Register       */
+#define CAN_MB01_DATA2		0xFFC02C28	/* Mailbox 1 Data Word 2 [47:32] Register       */
+#define CAN_MB01_DATA3		0xFFC02C2C	/* Mailbox 1 Data Word 3 [63:48] Register       */
+#define CAN_MB01_LENGTH		0xFFC02C30	/* Mailbox 1 Data Length Code Register          */
+#define CAN_MB01_TIMESTAMP	0xFFC02C34	/* Mailbox 1 Time Stamp Value Register          */
+#define CAN_MB01_ID0		0xFFC02C38	/* Mailbox 1 Identifier Low Register            */
+#define CAN_MB01_ID1		0xFFC02C3C	/* Mailbox 1 Identifier High Register           */
+
+#define CAN_MB02_DATA0		0xFFC02C40	/* Mailbox 2 Data Word 0 [15:0] Register        */
+#define CAN_MB02_DATA1		0xFFC02C44	/* Mailbox 2 Data Word 1 [31:16] Register       */
+#define CAN_MB02_DATA2		0xFFC02C48	/* Mailbox 2 Data Word 2 [47:32] Register       */
+#define CAN_MB02_DATA3		0xFFC02C4C	/* Mailbox 2 Data Word 3 [63:48] Register       */
+#define CAN_MB02_LENGTH		0xFFC02C50	/* Mailbox 2 Data Length Code Register          */
+#define CAN_MB02_TIMESTAMP	0xFFC02C54	/* Mailbox 2 Time Stamp Value Register          */
+#define CAN_MB02_ID0		0xFFC02C58	/* Mailbox 2 Identifier Low Register            */
+#define CAN_MB02_ID1		0xFFC02C5C	/* Mailbox 2 Identifier High Register           */
+
+#define CAN_MB03_DATA0		0xFFC02C60	/* Mailbox 3 Data Word 0 [15:0] Register        */
+#define CAN_MB03_DATA1		0xFFC02C64	/* Mailbox 3 Data Word 1 [31:16] Register       */
+#define CAN_MB03_DATA2		0xFFC02C68	/* Mailbox 3 Data Word 2 [47:32] Register       */
+#define CAN_MB03_DATA3		0xFFC02C6C	/* Mailbox 3 Data Word 3 [63:48] Register       */
+#define CAN_MB03_LENGTH		0xFFC02C70	/* Mailbox 3 Data Length Code Register          */
+#define CAN_MB03_TIMESTAMP	0xFFC02C74	/* Mailbox 3 Time Stamp Value Register          */
+#define CAN_MB03_ID0		0xFFC02C78	/* Mailbox 3 Identifier Low Register            */
+#define CAN_MB03_ID1		0xFFC02C7C	/* Mailbox 3 Identifier High Register           */
+
+#define CAN_MB04_DATA0		0xFFC02C80	/* Mailbox 4 Data Word 0 [15:0] Register        */
+#define CAN_MB04_DATA1		0xFFC02C84	/* Mailbox 4 Data Word 1 [31:16] Register       */
+#define CAN_MB04_DATA2		0xFFC02C88	/* Mailbox 4 Data Word 2 [47:32] Register       */
+#define CAN_MB04_DATA3		0xFFC02C8C	/* Mailbox 4 Data Word 3 [63:48] Register       */
+#define CAN_MB04_LENGTH		0xFFC02C90	/* Mailbox 4 Data Length Code Register          */
+#define CAN_MB04_TIMESTAMP	0xFFC02C94	/* Mailbox 4 Time Stamp Value Register          */
+#define CAN_MB04_ID0		0xFFC02C98	/* Mailbox 4 Identifier Low Register            */
+#define CAN_MB04_ID1		0xFFC02C9C	/* Mailbox 4 Identifier High Register           */
+
+#define CAN_MB05_DATA0		0xFFC02CA0	/* Mailbox 5 Data Word 0 [15:0] Register        */
+#define CAN_MB05_DATA1		0xFFC02CA4	/* Mailbox 5 Data Word 1 [31:16] Register       */
+#define CAN_MB05_DATA2		0xFFC02CA8	/* Mailbox 5 Data Word 2 [47:32] Register       */
+#define CAN_MB05_DATA3		0xFFC02CAC	/* Mailbox 5 Data Word 3 [63:48] Register       */
+#define CAN_MB05_LENGTH		0xFFC02CB0	/* Mailbox 5 Data Length Code Register          */
+#define CAN_MB05_TIMESTAMP	0xFFC02CB4	/* Mailbox 5 Time Stamp Value Register          */
+#define CAN_MB05_ID0		0xFFC02CB8	/* Mailbox 5 Identifier Low Register            */
+#define CAN_MB05_ID1		0xFFC02CBC	/* Mailbox 5 Identifier High Register           */
+
+#define CAN_MB06_DATA0		0xFFC02CC0	/* Mailbox 6 Data Word 0 [15:0] Register        */
+#define CAN_MB06_DATA1		0xFFC02CC4	/* Mailbox 6 Data Word 1 [31:16] Register       */
+#define CAN_MB06_DATA2		0xFFC02CC8	/* Mailbox 6 Data Word 2 [47:32] Register       */
+#define CAN_MB06_DATA3		0xFFC02CCC	/* Mailbox 6 Data Word 3 [63:48] Register       */
+#define CAN_MB06_LENGTH		0xFFC02CD0	/* Mailbox 6 Data Length Code Register          */
+#define CAN_MB06_TIMESTAMP	0xFFC02CD4	/* Mailbox 6 Time Stamp Value Register          */
+#define CAN_MB06_ID0		0xFFC02CD8	/* Mailbox 6 Identifier Low Register            */
+#define CAN_MB06_ID1		0xFFC02CDC	/* Mailbox 6 Identifier High Register           */
+
+#define CAN_MB07_DATA0		0xFFC02CE0	/* Mailbox 7 Data Word 0 [15:0] Register        */
+#define CAN_MB07_DATA1		0xFFC02CE4	/* Mailbox 7 Data Word 1 [31:16] Register       */
+#define CAN_MB07_DATA2		0xFFC02CE8	/* Mailbox 7 Data Word 2 [47:32] Register       */
+#define CAN_MB07_DATA3		0xFFC02CEC	/* Mailbox 7 Data Word 3 [63:48] Register       */
+#define CAN_MB07_LENGTH		0xFFC02CF0	/* Mailbox 7 Data Length Code Register          */
+#define CAN_MB07_TIMESTAMP	0xFFC02CF4	/* Mailbox 7 Time Stamp Value Register          */
+#define CAN_MB07_ID0		0xFFC02CF8	/* Mailbox 7 Identifier Low Register            */
+#define CAN_MB07_ID1		0xFFC02CFC	/* Mailbox 7 Identifier High Register           */
+
+#define CAN_MB08_DATA0		0xFFC02D00	/* Mailbox 8 Data Word 0 [15:0] Register        */
+#define CAN_MB08_DATA1		0xFFC02D04	/* Mailbox 8 Data Word 1 [31:16] Register       */
+#define CAN_MB08_DATA2		0xFFC02D08	/* Mailbox 8 Data Word 2 [47:32] Register       */
+#define CAN_MB08_DATA3		0xFFC02D0C	/* Mailbox 8 Data Word 3 [63:48] Register       */
+#define CAN_MB08_LENGTH		0xFFC02D10	/* Mailbox 8 Data Length Code Register          */
+#define CAN_MB08_TIMESTAMP	0xFFC02D14	/* Mailbox 8 Time Stamp Value Register          */
+#define CAN_MB08_ID0		0xFFC02D18	/* Mailbox 8 Identifier Low Register            */
+#define CAN_MB08_ID1		0xFFC02D1C	/* Mailbox 8 Identifier High Register           */
+
+#define CAN_MB09_DATA0		0xFFC02D20	/* Mailbox 9 Data Word 0 [15:0] Register        */
+#define CAN_MB09_DATA1		0xFFC02D24	/* Mailbox 9 Data Word 1 [31:16] Register       */
+#define CAN_MB09_DATA2		0xFFC02D28	/* Mailbox 9 Data Word 2 [47:32] Register       */
+#define CAN_MB09_DATA3		0xFFC02D2C	/* Mailbox 9 Data Word 3 [63:48] Register       */
+#define CAN_MB09_LENGTH		0xFFC02D30	/* Mailbox 9 Data Length Code Register          */
+#define CAN_MB09_TIMESTAMP	0xFFC02D34	/* Mailbox 9 Time Stamp Value Register          */
+#define CAN_MB09_ID0		0xFFC02D38	/* Mailbox 9 Identifier Low Register            */
+#define CAN_MB09_ID1		0xFFC02D3C	/* Mailbox 9 Identifier High Register           */
+
+#define CAN_MB10_DATA0		0xFFC02D40	/* Mailbox 10 Data Word 0 [15:0] Register       */
+#define CAN_MB10_DATA1		0xFFC02D44	/* Mailbox 10 Data Word 1 [31:16] Register      */
+#define CAN_MB10_DATA2		0xFFC02D48	/* Mailbox 10 Data Word 2 [47:32] Register      */
+#define CAN_MB10_DATA3		0xFFC02D4C	/* Mailbox 10 Data Word 3 [63:48] Register      */
+#define CAN_MB10_LENGTH		0xFFC02D50	/* Mailbox 10 Data Length Code Register         */
+#define CAN_MB10_TIMESTAMP	0xFFC02D54	/* Mailbox 10 Time Stamp Value Register         */
+#define CAN_MB10_ID0		0xFFC02D58	/* Mailbox 10 Identifier Low Register           */
+#define CAN_MB10_ID1		0xFFC02D5C	/* Mailbox 10 Identifier High Register          */
+
+#define CAN_MB11_DATA0		0xFFC02D60	/* Mailbox 11 Data Word 0 [15:0] Register       */
+#define CAN_MB11_DATA1		0xFFC02D64	/* Mailbox 11 Data Word 1 [31:16] Register      */
+#define CAN_MB11_DATA2		0xFFC02D68	/* Mailbox 11 Data Word 2 [47:32] Register      */
+#define CAN_MB11_DATA3		0xFFC02D6C	/* Mailbox 11 Data Word 3 [63:48] Register      */
+#define CAN_MB11_LENGTH		0xFFC02D70	/* Mailbox 11 Data Length Code Register         */
+#define CAN_MB11_TIMESTAMP	0xFFC02D74	/* Mailbox 11 Time Stamp Value Register         */
+#define CAN_MB11_ID0		0xFFC02D78	/* Mailbox 11 Identifier Low Register           */
+#define CAN_MB11_ID1		0xFFC02D7C	/* Mailbox 11 Identifier High Register          */
+
+#define CAN_MB12_DATA0		0xFFC02D80	/* Mailbox 12 Data Word 0 [15:0] Register       */
+#define CAN_MB12_DATA1		0xFFC02D84	/* Mailbox 12 Data Word 1 [31:16] Register      */
+#define CAN_MB12_DATA2		0xFFC02D88	/* Mailbox 12 Data Word 2 [47:32] Register      */
+#define CAN_MB12_DATA3		0xFFC02D8C	/* Mailbox 12 Data Word 3 [63:48] Register      */
+#define CAN_MB12_LENGTH		0xFFC02D90	/* Mailbox 12 Data Length Code Register         */
+#define CAN_MB12_TIMESTAMP	0xFFC02D94	/* Mailbox 12 Time Stamp Value Register         */
+#define CAN_MB12_ID0		0xFFC02D98	/* Mailbox 12 Identifier Low Register           */
+#define CAN_MB12_ID1		0xFFC02D9C	/* Mailbox 12 Identifier High Register          */
+
+#define CAN_MB13_DATA0		0xFFC02DA0	/* Mailbox 13 Data Word 0 [15:0] Register       */
+#define CAN_MB13_DATA1		0xFFC02DA4	/* Mailbox 13 Data Word 1 [31:16] Register      */
+#define CAN_MB13_DATA2		0xFFC02DA8	/* Mailbox 13 Data Word 2 [47:32] Register      */
+#define CAN_MB13_DATA3		0xFFC02DAC	/* Mailbox 13 Data Word 3 [63:48] Register      */
+#define CAN_MB13_LENGTH		0xFFC02DB0	/* Mailbox 13 Data Length Code Register         */
+#define CAN_MB13_TIMESTAMP	0xFFC02DB4	/* Mailbox 13 Time Stamp Value Register         */
+#define CAN_MB13_ID0		0xFFC02DB8	/* Mailbox 13 Identifier Low Register           */
+#define CAN_MB13_ID1		0xFFC02DBC	/* Mailbox 13 Identifier High Register          */
+
+#define CAN_MB14_DATA0		0xFFC02DC0	/* Mailbox 14 Data Word 0 [15:0] Register       */
+#define CAN_MB14_DATA1		0xFFC02DC4	/* Mailbox 14 Data Word 1 [31:16] Register      */
+#define CAN_MB14_DATA2		0xFFC02DC8	/* Mailbox 14 Data Word 2 [47:32] Register      */
+#define CAN_MB14_DATA3		0xFFC02DCC	/* Mailbox 14 Data Word 3 [63:48] Register      */
+#define CAN_MB14_LENGTH		0xFFC02DD0	/* Mailbox 14 Data Length Code Register         */
+#define CAN_MB14_TIMESTAMP	0xFFC02DD4	/* Mailbox 14 Time Stamp Value Register         */
+#define CAN_MB14_ID0		0xFFC02DD8	/* Mailbox 14 Identifier Low Register           */
+#define CAN_MB14_ID1		0xFFC02DDC	/* Mailbox 14 Identifier High Register          */
+
+#define CAN_MB15_DATA0		0xFFC02DE0	/* Mailbox 15 Data Word 0 [15:0] Register       */
+#define CAN_MB15_DATA1		0xFFC02DE4	/* Mailbox 15 Data Word 1 [31:16] Register      */
+#define CAN_MB15_DATA2		0xFFC02DE8	/* Mailbox 15 Data Word 2 [47:32] Register      */
+#define CAN_MB15_DATA3		0xFFC02DEC	/* Mailbox 15 Data Word 3 [63:48] Register      */
+#define CAN_MB15_LENGTH		0xFFC02DF0	/* Mailbox 15 Data Length Code Register         */
+#define CAN_MB15_TIMESTAMP	0xFFC02DF4	/* Mailbox 15 Time Stamp Value Register         */
+#define CAN_MB15_ID0		0xFFC02DF8	/* Mailbox 15 Identifier Low Register           */
+#define CAN_MB15_ID1		0xFFC02DFC	/* Mailbox 15 Identifier High Register          */
+
+#define CAN_MB16_DATA0		0xFFC02E00	/* Mailbox 16 Data Word 0 [15:0] Register       */
+#define CAN_MB16_DATA1		0xFFC02E04	/* Mailbox 16 Data Word 1 [31:16] Register      */
+#define CAN_MB16_DATA2		0xFFC02E08	/* Mailbox 16 Data Word 2 [47:32] Register      */
+#define CAN_MB16_DATA3		0xFFC02E0C	/* Mailbox 16 Data Word 3 [63:48] Register      */
+#define CAN_MB16_LENGTH		0xFFC02E10	/* Mailbox 16 Data Length Code Register         */
+#define CAN_MB16_TIMESTAMP	0xFFC02E14	/* Mailbox 16 Time Stamp Value Register         */
+#define CAN_MB16_ID0		0xFFC02E18	/* Mailbox 16 Identifier Low Register           */
+#define CAN_MB16_ID1		0xFFC02E1C	/* Mailbox 16 Identifier High Register          */
+
+#define CAN_MB17_DATA0		0xFFC02E20	/* Mailbox 17 Data Word 0 [15:0] Register       */
+#define CAN_MB17_DATA1		0xFFC02E24	/* Mailbox 17 Data Word 1 [31:16] Register      */
+#define CAN_MB17_DATA2		0xFFC02E28	/* Mailbox 17 Data Word 2 [47:32] Register      */
+#define CAN_MB17_DATA3		0xFFC02E2C	/* Mailbox 17 Data Word 3 [63:48] Register      */
+#define CAN_MB17_LENGTH		0xFFC02E30	/* Mailbox 17 Data Length Code Register         */
+#define CAN_MB17_TIMESTAMP	0xFFC02E34	/* Mailbox 17 Time Stamp Value Register         */
+#define CAN_MB17_ID0		0xFFC02E38	/* Mailbox 17 Identifier Low Register           */
+#define CAN_MB17_ID1		0xFFC02E3C	/* Mailbox 17 Identifier High Register          */
+
+#define CAN_MB18_DATA0		0xFFC02E40	/* Mailbox 18 Data Word 0 [15:0] Register       */
+#define CAN_MB18_DATA1		0xFFC02E44	/* Mailbox 18 Data Word 1 [31:16] Register      */
+#define CAN_MB18_DATA2		0xFFC02E48	/* Mailbox 18 Data Word 2 [47:32] Register      */
+#define CAN_MB18_DATA3		0xFFC02E4C	/* Mailbox 18 Data Word 3 [63:48] Register      */
+#define CAN_MB18_LENGTH		0xFFC02E50	/* Mailbox 18 Data Length Code Register         */
+#define CAN_MB18_TIMESTAMP	0xFFC02E54	/* Mailbox 18 Time Stamp Value Register         */
+#define CAN_MB18_ID0		0xFFC02E58	/* Mailbox 18 Identifier Low Register           */
+#define CAN_MB18_ID1		0xFFC02E5C	/* Mailbox 18 Identifier High Register          */
+
+#define CAN_MB19_DATA0		0xFFC02E60	/* Mailbox 19 Data Word 0 [15:0] Register       */
+#define CAN_MB19_DATA1		0xFFC02E64	/* Mailbox 19 Data Word 1 [31:16] Register      */
+#define CAN_MB19_DATA2		0xFFC02E68	/* Mailbox 19 Data Word 2 [47:32] Register      */
+#define CAN_MB19_DATA3		0xFFC02E6C	/* Mailbox 19 Data Word 3 [63:48] Register      */
+#define CAN_MB19_LENGTH		0xFFC02E70	/* Mailbox 19 Data Length Code Register         */
+#define CAN_MB19_TIMESTAMP	0xFFC02E74	/* Mailbox 19 Time Stamp Value Register         */
+#define CAN_MB19_ID0		0xFFC02E78	/* Mailbox 19 Identifier Low Register           */
+#define CAN_MB19_ID1		0xFFC02E7C	/* Mailbox 19 Identifier High Register          */
+
+#define CAN_MB20_DATA0		0xFFC02E80	/* Mailbox 20 Data Word 0 [15:0] Register       */
+#define CAN_MB20_DATA1		0xFFC02E84	/* Mailbox 20 Data Word 1 [31:16] Register      */
+#define CAN_MB20_DATA2		0xFFC02E88	/* Mailbox 20 Data Word 2 [47:32] Register      */
+#define CAN_MB20_DATA3		0xFFC02E8C	/* Mailbox 20 Data Word 3 [63:48] Register      */
+#define CAN_MB20_LENGTH		0xFFC02E90	/* Mailbox 20 Data Length Code Register         */
+#define CAN_MB20_TIMESTAMP	0xFFC02E94	/* Mailbox 20 Time Stamp Value Register         */
+#define CAN_MB20_ID0		0xFFC02E98	/* Mailbox 20 Identifier Low Register           */
+#define CAN_MB20_ID1		0xFFC02E9C	/* Mailbox 20 Identifier High Register          */
+
+#define CAN_MB21_DATA0		0xFFC02EA0	/* Mailbox 21 Data Word 0 [15:0] Register       */
+#define CAN_MB21_DATA1		0xFFC02EA4	/* Mailbox 21 Data Word 1 [31:16] Register      */
+#define CAN_MB21_DATA2		0xFFC02EA8	/* Mailbox 21 Data Word 2 [47:32] Register      */
+#define CAN_MB21_DATA3		0xFFC02EAC	/* Mailbox 21 Data Word 3 [63:48] Register      */
+#define CAN_MB21_LENGTH		0xFFC02EB0	/* Mailbox 21 Data Length Code Register         */
+#define CAN_MB21_TIMESTAMP	0xFFC02EB4	/* Mailbox 21 Time Stamp Value Register         */
+#define CAN_MB21_ID0		0xFFC02EB8	/* Mailbox 21 Identifier Low Register           */
+#define CAN_MB21_ID1		0xFFC02EBC	/* Mailbox 21 Identifier High Register          */
+
+#define CAN_MB22_DATA0		0xFFC02EC0	/* Mailbox 22 Data Word 0 [15:0] Register       */
+#define CAN_MB22_DATA1		0xFFC02EC4	/* Mailbox 22 Data Word 1 [31:16] Register      */
+#define CAN_MB22_DATA2		0xFFC02EC8	/* Mailbox 22 Data Word 2 [47:32] Register      */
+#define CAN_MB22_DATA3		0xFFC02ECC	/* Mailbox 22 Data Word 3 [63:48] Register      */
+#define CAN_MB22_LENGTH		0xFFC02ED0	/* Mailbox 22 Data Length Code Register         */
+#define CAN_MB22_TIMESTAMP	0xFFC02ED4	/* Mailbox 22 Time Stamp Value Register         */
+#define CAN_MB22_ID0		0xFFC02ED8	/* Mailbox 22 Identifier Low Register           */
+#define CAN_MB22_ID1		0xFFC02EDC	/* Mailbox 22 Identifier High Register          */
+
+#define CAN_MB23_DATA0		0xFFC02EE0	/* Mailbox 23 Data Word 0 [15:0] Register       */
+#define CAN_MB23_DATA1		0xFFC02EE4	/* Mailbox 23 Data Word 1 [31:16] Register      */
+#define CAN_MB23_DATA2		0xFFC02EE8	/* Mailbox 23 Data Word 2 [47:32] Register      */
+#define CAN_MB23_DATA3		0xFFC02EEC	/* Mailbox 23 Data Word 3 [63:48] Register      */
+#define CAN_MB23_LENGTH		0xFFC02EF0	/* Mailbox 23 Data Length Code Register         */
+#define CAN_MB23_TIMESTAMP	0xFFC02EF4	/* Mailbox 23 Time Stamp Value Register         */
+#define CAN_MB23_ID0		0xFFC02EF8	/* Mailbox 23 Identifier Low Register           */
+#define CAN_MB23_ID1		0xFFC02EFC	/* Mailbox 23 Identifier High Register          */
+
+#define CAN_MB24_DATA0		0xFFC02F00	/* Mailbox 24 Data Word 0 [15:0] Register       */
+#define CAN_MB24_DATA1		0xFFC02F04	/* Mailbox 24 Data Word 1 [31:16] Register      */
+#define CAN_MB24_DATA2		0xFFC02F08	/* Mailbox 24 Data Word 2 [47:32] Register      */
+#define CAN_MB24_DATA3		0xFFC02F0C	/* Mailbox 24 Data Word 3 [63:48] Register      */
+#define CAN_MB24_LENGTH		0xFFC02F10	/* Mailbox 24 Data Length Code Register         */
+#define CAN_MB24_TIMESTAMP	0xFFC02F14	/* Mailbox 24 Time Stamp Value Register         */
+#define CAN_MB24_ID0		0xFFC02F18	/* Mailbox 24 Identifier Low Register           */
+#define CAN_MB24_ID1		0xFFC02F1C	/* Mailbox 24 Identifier High Register          */
+
+#define CAN_MB25_DATA0		0xFFC02F20	/* Mailbox 25 Data Word 0 [15:0] Register       */
+#define CAN_MB25_DATA1		0xFFC02F24	/* Mailbox 25 Data Word 1 [31:16] Register      */
+#define CAN_MB25_DATA2		0xFFC02F28	/* Mailbox 25 Data Word 2 [47:32] Register      */
+#define CAN_MB25_DATA3		0xFFC02F2C	/* Mailbox 25 Data Word 3 [63:48] Register      */
+#define CAN_MB25_LENGTH		0xFFC02F30	/* Mailbox 25 Data Length Code Register         */
+#define CAN_MB25_TIMESTAMP	0xFFC02F34	/* Mailbox 25 Time Stamp Value Register         */
+#define CAN_MB25_ID0		0xFFC02F38	/* Mailbox 25 Identifier Low Register           */
+#define CAN_MB25_ID1		0xFFC02F3C	/* Mailbox 25 Identifier High Register          */
+
+#define CAN_MB26_DATA0		0xFFC02F40	/* Mailbox 26 Data Word 0 [15:0] Register       */
+#define CAN_MB26_DATA1		0xFFC02F44	/* Mailbox 26 Data Word 1 [31:16] Register      */
+#define CAN_MB26_DATA2		0xFFC02F48	/* Mailbox 26 Data Word 2 [47:32] Register      */
+#define CAN_MB26_DATA3		0xFFC02F4C	/* Mailbox 26 Data Word 3 [63:48] Register      */
+#define CAN_MB26_LENGTH		0xFFC02F50	/* Mailbox 26 Data Length Code Register         */
+#define CAN_MB26_TIMESTAMP	0xFFC02F54	/* Mailbox 26 Time Stamp Value Register         */
+#define CAN_MB26_ID0		0xFFC02F58	/* Mailbox 26 Identifier Low Register           */
+#define CAN_MB26_ID1		0xFFC02F5C	/* Mailbox 26 Identifier High Register          */
+
+#define CAN_MB27_DATA0		0xFFC02F60	/* Mailbox 27 Data Word 0 [15:0] Register       */
+#define CAN_MB27_DATA1		0xFFC02F64	/* Mailbox 27 Data Word 1 [31:16] Register      */
+#define CAN_MB27_DATA2		0xFFC02F68	/* Mailbox 27 Data Word 2 [47:32] Register      */
+#define CAN_MB27_DATA3		0xFFC02F6C	/* Mailbox 27 Data Word 3 [63:48] Register      */
+#define CAN_MB27_LENGTH		0xFFC02F70	/* Mailbox 27 Data Length Code Register         */
+#define CAN_MB27_TIMESTAMP	0xFFC02F74	/* Mailbox 27 Time Stamp Value Register         */
+#define CAN_MB27_ID0		0xFFC02F78	/* Mailbox 27 Identifier Low Register           */
+#define CAN_MB27_ID1		0xFFC02F7C	/* Mailbox 27 Identifier High Register          */
+
+#define CAN_MB28_DATA0		0xFFC02F80	/* Mailbox 28 Data Word 0 [15:0] Register       */
+#define CAN_MB28_DATA1		0xFFC02F84	/* Mailbox 28 Data Word 1 [31:16] Register      */
+#define CAN_MB28_DATA2		0xFFC02F88	/* Mailbox 28 Data Word 2 [47:32] Register      */
+#define CAN_MB28_DATA3		0xFFC02F8C	/* Mailbox 28 Data Word 3 [63:48] Register      */
+#define CAN_MB28_LENGTH		0xFFC02F90	/* Mailbox 28 Data Length Code Register         */
+#define CAN_MB28_TIMESTAMP	0xFFC02F94	/* Mailbox 28 Time Stamp Value Register         */
+#define CAN_MB28_ID0		0xFFC02F98	/* Mailbox 28 Identifier Low Register           */
+#define CAN_MB28_ID1		0xFFC02F9C	/* Mailbox 28 Identifier High Register          */
+
+#define CAN_MB29_DATA0		0xFFC02FA0	/* Mailbox 29 Data Word 0 [15:0] Register       */
+#define CAN_MB29_DATA1		0xFFC02FA4	/* Mailbox 29 Data Word 1 [31:16] Register      */
+#define CAN_MB29_DATA2		0xFFC02FA8	/* Mailbox 29 Data Word 2 [47:32] Register      */
+#define CAN_MB29_DATA3		0xFFC02FAC	/* Mailbox 29 Data Word 3 [63:48] Register      */
+#define CAN_MB29_LENGTH		0xFFC02FB0	/* Mailbox 29 Data Length Code Register         */
+#define CAN_MB29_TIMESTAMP	0xFFC02FB4	/* Mailbox 29 Time Stamp Value Register         */
+#define CAN_MB29_ID0		0xFFC02FB8	/* Mailbox 29 Identifier Low Register           */
+#define CAN_MB29_ID1		0xFFC02FBC	/* Mailbox 29 Identifier High Register          */
+
+#define CAN_MB30_DATA0		0xFFC02FC0	/* Mailbox 30 Data Word 0 [15:0] Register       */
+#define CAN_MB30_DATA1		0xFFC02FC4	/* Mailbox 30 Data Word 1 [31:16] Register      */
+#define CAN_MB30_DATA2		0xFFC02FC8	/* Mailbox 30 Data Word 2 [47:32] Register      */
+#define CAN_MB30_DATA3		0xFFC02FCC	/* Mailbox 30 Data Word 3 [63:48] Register      */
+#define CAN_MB30_LENGTH		0xFFC02FD0	/* Mailbox 30 Data Length Code Register         */
+#define CAN_MB30_TIMESTAMP	0xFFC02FD4	/* Mailbox 30 Time Stamp Value Register         */
+#define CAN_MB30_ID0		0xFFC02FD8	/* Mailbox 30 Identifier Low Register           */
+#define CAN_MB30_ID1		0xFFC02FDC	/* Mailbox 30 Identifier High Register          */
+
+#define CAN_MB31_DATA0		0xFFC02FE0	/* Mailbox 31 Data Word 0 [15:0] Register       */
+#define CAN_MB31_DATA1		0xFFC02FE4	/* Mailbox 31 Data Word 1 [31:16] Register      */
+#define CAN_MB31_DATA2		0xFFC02FE8	/* Mailbox 31 Data Word 2 [47:32] Register      */
+#define CAN_MB31_DATA3		0xFFC02FEC	/* Mailbox 31 Data Word 3 [63:48] Register      */
+#define CAN_MB31_LENGTH		0xFFC02FF0	/* Mailbox 31 Data Length Code Register         */
+#define CAN_MB31_TIMESTAMP	0xFFC02FF4	/* Mailbox 31 Time Stamp Value Register         */
+#define CAN_MB31_ID0		0xFFC02FF8	/* Mailbox 31 Identifier Low Register           */
+#define CAN_MB31_ID1		0xFFC02FFC	/* Mailbox 31 Identifier High Register          */
+
+/* CAN Mailbox Area Macros				*/
+#define CAN_MB_ID1(x)		(CAN_MB00_ID1+((x)*0x20))
+#define CAN_MB_ID0(x)		(CAN_MB00_ID0+((x)*0x20))
+#define CAN_MB_TIMESTAMP(x)	(CAN_MB00_TIMESTAMP+((x)*0x20))
+#define CAN_MB_LENGTH(x)	(CAN_MB00_LENGTH+((x)*0x20))
+#define CAN_MB_DATA3(x)		(CAN_MB00_DATA3+((x)*0x20))
+#define CAN_MB_DATA2(x)		(CAN_MB00_DATA2+((x)*0x20))
+#define CAN_MB_DATA1(x)		(CAN_MB00_DATA1+((x)*0x20))
+#define CAN_MB_DATA0(x)		(CAN_MB00_DATA0+((x)*0x20))
+
+/* Pin Control Registers	(0xFFC03200 - 0xFFC032FF)											*/
+#define PORTF_FER			0xFFC03200	/* Port F Function Enable Register (Alternate/Flag*)    */
+#define PORTG_FER			0xFFC03204	/* Port G Function Enable Register (Alternate/Flag*)    */
+#define PORTH_FER			0xFFC03208	/* Port H Function Enable Register (Alternate/Flag*)    */
+#define BFIN_PORT_MUX			0xFFC0320C	/* Port Multiplexer Control Register                                    */
+
+/* Handshake MDMA Registers	(0xFFC03300 - 0xFFC033FF)										*/
+#define HMDMA0_CONTROL		0xFFC03300	/* Handshake MDMA0 Control Register                                     */
+#define HMDMA0_ECINIT		0xFFC03304	/* HMDMA0 Initial Edge Count Register                           */
+#define HMDMA0_BCINIT		0xFFC03308	/* HMDMA0 Initial Block Count Register                          */
+#define HMDMA0_ECURGENT		0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register         */
+#define HMDMA0_ECOVERFLOW	0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register        */
+#define HMDMA0_ECOUNT		0xFFC03314	/* HMDMA0 Current Edge Count Register                           */
+#define HMDMA0_BCOUNT		0xFFC03318	/* HMDMA0 Current Block Count Register                          */
+
+#define HMDMA1_CONTROL		0xFFC03340	/* Handshake MDMA1 Control Register                                     */
+#define HMDMA1_ECINIT		0xFFC03344	/* HMDMA1 Initial Edge Count Register                           */
+#define HMDMA1_BCINIT		0xFFC03348	/* HMDMA1 Initial Block Count Register                          */
+#define HMDMA1_ECURGENT		0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register         */
+#define HMDMA1_ECOVERFLOW	0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register        */
+#define HMDMA1_ECOUNT		0xFFC03354	/* HMDMA1 Current Edge Count Register                           */
+#define HMDMA1_BCOUNT		0xFFC03358	/* HMDMA1 Current Block Count Register                          */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+/*
+** ********************* PLL AND RESET MASKS ****************************************/
+/* PLL_CTL Masks																	*/
+#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2                                     */
+#define PLL_OFF			0x0002	/* PLL Not Powered                                                                      */
+#define STOPCK			0x0008	/* Core Clock Off                                                                       */
+#define PDWN			0x0020	/* Enter Deep Sleep Mode                                                        */
+#define	IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches                        */
+#define	OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals                       */
+#define BYPASS			0x0100	/* Bypass the PLL                                                                       */
+#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors                       */
+/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
+#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL         */
+
+/* PLL_DIV Masks														*/
+#define SSEL			0x000F	/* System Select                                                */
+#define	CSEL			0x0030	/* Core Select                                                  */
+#define CSEL_DIV1		0x0000	/*              CCLK = VCO / 1                                  */
+#define CSEL_DIV2		0x0010	/*              CCLK = VCO / 2                                  */
+#define	CSEL_DIV4		0x0020	/*              CCLK = VCO / 4                                  */
+#define	CSEL_DIV8		0x0030	/*              CCLK = VCO / 8                                  */
+/* PLL_DIV Macros														*/
+#define SET_SSEL(x)		((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL  */
+
+/* VR_CTL Masks																	*/
+#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
+#define	HIBERNATE		0x0000	/*              Powerdown/Bypass On-Board Regulation    */
+#define	FREQ_333		0x0001	/*              Switching Frequency Is 333 kHz                  */
+#define	FREQ_667		0x0002	/*              Switching Frequency Is 667 kHz                  */
+#define	FREQ_1000		0x0003	/*              Switching Frequency Is 1 MHz                    */
+
+#define GAIN			0x000C	/* Voltage Level Gain   */
+#define	GAIN_5			0x0000	/*              GAIN = 5                */
+#define	GAIN_10			0x0004	/*              GAIN = 10               */
+#define	GAIN_20			0x0008	/*              GAIN = 20               */
+#define	GAIN_50			0x000C	/*              GAIN = 50               */
+
+#define	VLEV			0x00F0	/* Internal Voltage Level                                       */
+#define	VLEV_085 		0x0060	/*              VLEV = 0.85 V (-5% - +10% Accuracy)     */
+#define	VLEV_090		0x0070	/*              VLEV = 0.90 V (-5% - +10% Accuracy)     */
+#define	VLEV_095		0x0080	/*              VLEV = 0.95 V (-5% - +10% Accuracy)     */
+#define	VLEV_100		0x0090	/*              VLEV = 1.00 V (-5% - +10% Accuracy)     */
+#define	VLEV_105		0x00A0	/*              VLEV = 1.05 V (-5% - +10% Accuracy)     */
+#define	VLEV_110		0x00B0	/*              VLEV = 1.10 V (-5% - +10% Accuracy)     */
+#define	VLEV_115		0x00C0	/*              VLEV = 1.15 V (-5% - +10% Accuracy)     */
+#define	VLEV_120		0x00D0	/*              VLEV = 1.20 V (-5% - +10% Accuracy)     */
+#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
+#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
+
+#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate       */
+#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate			*/
+#define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
+#define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
+#define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
+#define	SCKELOW		0x8000	/* Enable Drive CKE Low During Reset		*/
+
+/* PLL_STAT Masks																	*/
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
+#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
+#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SWRST Masks																		*/
+#define SYSTEM_RESET		0x0007	/* Initiates A System Software Reset                    */
+#define	DOUBLE_FAULT		0x0008	/* Core Double Fault Causes Reset                               */
+#define RESET_DOUBLE		0x2000	/* SW Reset Generated By Core Double-Fault              */
+#define RESET_WDOG			0x4000	/* SW Reset Generated By Watchdog Timer                 */
+#define RESET_SOFTWARE		0x8000	/* SW Reset Occurred Since Last Read Of SWRST   */
+
+/* SYSCR Masks																				*/
+#define BMODE				0x0007	/* Boot Mode - Latched During HW Reset From Mode Pins   */
+#define	NOBOOT				0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0               */
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
+
+/* SIC_IAR0 Macros															*/
+#define P0_IVG(x)		(((x)&0xF)-7)	/* Peripheral #0 assigned IVG #x        */
+#define P1_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #1 assigned IVG #x        */
+#define P2_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #2 assigned IVG #x        */
+#define P3_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #3 assigned IVG #x        */
+#define P4_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #4 assigned IVG #x        */
+#define P5_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #5 assigned IVG #x        */
+#define P6_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #6 assigned IVG #x        */
+#define P7_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #7 assigned IVG #x        */
+
+/* SIC_IAR1 Macros															*/
+#define P8_IVG(x)		(((x)&0xF)-7)	/* Peripheral #8 assigned IVG #x        */
+#define P9_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #9 assigned IVG #x        */
+#define P10_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #10 assigned IVG #x       */
+#define P11_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #11 assigned IVG #x       */
+#define P12_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #12 assigned IVG #x       */
+#define P13_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #13 assigned IVG #x       */
+#define P14_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #14 assigned IVG #x       */
+#define P15_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #15 assigned IVG #x       */
+
+/* SIC_IAR2 Macros															*/
+#define P16_IVG(x)		(((x)&0xF)-7)	/* Peripheral #16 assigned IVG #x       */
+#define P17_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #17 assigned IVG #x       */
+#define P18_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #18 assigned IVG #x       */
+#define P19_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #19 assigned IVG #x       */
+#define P20_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #20 assigned IVG #x       */
+#define P21_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #21 assigned IVG #x       */
+#define P22_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #22 assigned IVG #x       */
+#define P23_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #23 assigned IVG #x       */
+
+/* SIC_IAR3 Macros															*/
+#define P24_IVG(x)		(((x)&0xF)-7)	/* Peripheral #24 assigned IVG #x       */
+#define P25_IVG(x)		(((x)&0xF)-7) << 0x4	/* Peripheral #25 assigned IVG #x       */
+#define P26_IVG(x)		(((x)&0xF)-7) << 0x8	/* Peripheral #26 assigned IVG #x       */
+#define P27_IVG(x)		(((x)&0xF)-7) << 0xC	/* Peripheral #27 assigned IVG #x       */
+#define P28_IVG(x)		(((x)&0xF)-7) << 0x10	/* Peripheral #28 assigned IVG #x       */
+#define P29_IVG(x)		(((x)&0xF)-7) << 0x14	/* Peripheral #29 assigned IVG #x       */
+#define P30_IVG(x)		(((x)&0xF)-7) << 0x18	/* Peripheral #30 assigned IVG #x       */
+#define P31_IVG(x)		(((x)&0xF)-7) << 0x1C	/* Peripheral #31 assigned IVG #x       */
+
+/* SIC_IMASK Masks																		*/
+#define SIC_UNMASK_ALL	0x00000000	/* Unmask all peripheral interrupts     */
+#define SIC_MASK_ALL	0xFFFFFFFF	/* Mask all peripheral interrupts       */
+#define SIC_MASK(x)		(1 << ((x)&0x1F))	/* Mask Peripheral #x interrupt         */
+#define SIC_UNMASK(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Unmask Peripheral #x interrupt       */
+
+/* SIC_IWR Masks																		*/
+#define IWR_DISABLE_ALL	0x00000000	/* Wakeup Disable all peripherals       */
+#define IWR_ENABLE_ALL	0xFFFFFFFF	/* Wakeup Enable all peripherals        */
+#define IWR_ENABLE(x)	(1 << ((x)&0x1F))	/* Wakeup Enable Peripheral #x          */
+#define IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F)))	/* Wakeup Disable Peripheral #x         */
+
+/* ************** UART CONTROLLER MASKS *************************/
+/* UARTx_LCR Masks												*/
+#define WLS(x)		(((x)-5) & 0x03)	/* Word Length Select   */
+#define STB			0x04	/* Stop Bits                    */
+#define PEN			0x08	/* Parity Enable                */
+#define EPS			0x10	/* Even Parity Select   */
+#define STP			0x20	/* Stick Parity                 */
+#define SB			0x40	/* Set Break                    */
+#define DLAB		0x80	/* Divisor Latch Access */
+
+/* UARTx_MCR Mask										*/
+#define LOOP_ENA		0x10	/* Loopback Mode Enable         */
+#define LOOP_ENA_P	0x04
+/* UARTx_LSR Masks										*/
+#define DR			0x01	/* Data Ready                           */
+#define OE			0x02	/* Overrun Error                        */
+#define PE			0x04	/* Parity Error                         */
+#define FE			0x08	/* Framing Error                        */
+#define BI			0x10	/* Break Interrupt                      */
+#define THRE		0x20	/* THR Empty                            */
+#define TEMT		0x40	/* TSR and UART_THR Empty       */
+
+/* UARTx_IER Masks															*/
+#define ERBFI		0x01	/* Enable Receive Buffer Full Interrupt         */
+#define ETBEI		0x02	/* Enable Transmit Buffer Empty Interrupt       */
+#define ELSI		0x04	/* Enable RX Status Interrupt                           */
+
+/* UARTx_IIR Masks														*/
+#define NINT		0x01	/* Pending Interrupt                                    */
+#define IIR_TX_READY    0x02	/* UART_THR empty                               */
+#define IIR_RX_READY    0x04	/* Receive data ready                           */
+#define IIR_LINE_CHANGE 0x06	/* Receive line status                          */
+#define IIR_STATUS	0x06
+
+/* UARTx_GCTL Masks													*/
+#define UCEN		0x01	/* Enable UARTx Clocks                          */
+#define IREN		0x02	/* Enable IrDA Mode                                     */
+#define TPOLC		0x04	/* IrDA TX Polarity Change                      */
+#define RPOLC		0x08	/* IrDA RX Polarity Change                      */
+#define FPE			0x10	/* Force Parity Error On Transmit       */
+#define FFE			0x20	/* Force Framing Error On Transmit      */
+
+/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  ****************************/
+/* SPI_CTL Masks																	*/
+#define	TIMOD		0x0003	/* Transfer Initiate Mode                                                       */
+#define RDBR_CORE	0x0000	/*              RDBR Read Initiates, IRQ When RDBR Full         */
+#define	TDBR_CORE	0x0001	/*              TDBR Write Initiates, IRQ When TDBR Empty       */
+#define RDBR_DMA	0x0002	/*              DMA Read, DMA Until FIFO Empty                          */
+#define TDBR_DMA	0x0003	/*              DMA Write, DMA Until FIFO Full                          */
+#define SZ			0x0004	/* Send Zero (When TDBR Empty, Send Zero/Last*)         */
+#define GM			0x0008	/* Get More (When RDBR Full, Overwrite/Discard*)        */
+#define PSSE		0x0010	/* Slave-Select Input Enable                                            */
+#define EMISO		0x0020	/* Enable MISO As Output                                                        */
+#define SIZE		0x0100	/* Size of Words (16/8* Bits)                                           */
+#define LSBF		0x0200	/* LSB First                                                                            */
+#define CPHA		0x0400	/* Clock Phase                                                                          */
+#define CPOL		0x0800	/* Clock Polarity                                                                       */
+#define MSTR		0x1000	/* Master/Slave*                                                                        */
+#define WOM			0x2000	/* Write Open Drain Master                                                      */
+#define SPE			0x4000	/* SPI Enable                                                                           */
+
+/* SPI_FLG Masks																	*/
+#define FLS1		0x0002	/* Enables SPI_FLOUT1 as SPI Slave-Select Output        */
+#define FLS2		0x0004	/* Enables SPI_FLOUT2 as SPI Slave-Select Output        */
+#define FLS3		0x0008	/* Enables SPI_FLOUT3 as SPI Slave-Select Output        */
+#define FLS4		0x0010	/* Enables SPI_FLOUT4 as SPI Slave-Select Output        */
+#define FLS5		0x0020	/* Enables SPI_FLOUT5 as SPI Slave-Select Output        */
+#define FLS6		0x0040	/* Enables SPI_FLOUT6 as SPI Slave-Select Output        */
+#define FLS7		0x0080	/* Enables SPI_FLOUT7 as SPI Slave-Select Output        */
+#define FLG1		0xFDFF	/* Activates SPI_FLOUT1                                                         */
+#define FLG2		0xFBFF	/* Activates SPI_FLOUT2                                                         */
+#define FLG3		0xF7FF	/* Activates SPI_FLOUT3                                                         */
+#define FLG4		0xEFFF	/* Activates SPI_FLOUT4                                                         */
+#define FLG5		0xDFFF	/* Activates SPI_FLOUT5                                                         */
+#define FLG6		0xBFFF	/* Activates SPI_FLOUT6                                                         */
+#define FLG7		0x7FFF	/* Activates SPI_FLOUT7                                                         */
+
+/* SPI_STAT Masks																				*/
+#define SPIF		0x0001	/* SPI Finished (Single-Word Transfer Complete)                                 */
+#define MODF		0x0002	/* Mode Fault Error (Another Device Tried To Become Master)             */
+#define TXE			0x0004	/* Transmission Error (Data Sent With No New Data In TDBR)              */
+#define TXS			0x0008	/* SPI_TDBR Data Buffer Status (Full/Empty*)                                    */
+#define RBSY		0x0010	/* Receive Error (Data Received With RDBR Full)                                 */
+#define RXS			0x0020	/* SPI_RDBR Data Buffer Status (Full/Empty*)                                    */
+#define TXCOL		0x0040	/* Transmit Collision Error (Corrupt Data May Have Been Sent)   */
+
+/*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
+/* TIMER_ENABLE Masks													*/
+#define TIMEN0			0x0001	/* Enable Timer 0                                       */
+#define TIMEN1			0x0002	/* Enable Timer 1                                       */
+#define TIMEN2			0x0004	/* Enable Timer 2                                       */
+#define TIMEN3			0x0008	/* Enable Timer 3                                       */
+#define TIMEN4			0x0010	/* Enable Timer 4                                       */
+#define TIMEN5			0x0020	/* Enable Timer 5                                       */
+#define TIMEN6			0x0040	/* Enable Timer 6                                       */
+#define TIMEN7			0x0080	/* Enable Timer 7                                       */
+
+/* TIMER_DISABLE Masks													*/
+#define TIMDIS0			TIMEN0	/* Disable Timer 0                                      */
+#define TIMDIS1			TIMEN1	/* Disable Timer 1                                      */
+#define TIMDIS2			TIMEN2	/* Disable Timer 2                                      */
+#define TIMDIS3			TIMEN3	/* Disable Timer 3                                      */
+#define TIMDIS4			TIMEN4	/* Disable Timer 4                                      */
+#define TIMDIS5			TIMEN5	/* Disable Timer 5                                      */
+#define TIMDIS6			TIMEN6	/* Disable Timer 6                                      */
+#define TIMDIS7			TIMEN7	/* Disable Timer 7                                      */
+
+/* TIMER_STATUS Masks													*/
+#define TIMIL0			0x00000001	/* Timer 0 Interrupt                            */
+#define TIMIL1			0x00000002	/* Timer 1 Interrupt                            */
+#define TIMIL2			0x00000004	/* Timer 2 Interrupt                            */
+#define TIMIL3			0x00000008	/* Timer 3 Interrupt                            */
+#define TOVF_ERR0		0x00000010	/* Timer 0 Counter Overflow			*/
+#define TOVF_ERR1		0x00000020	/* Timer 1 Counter Overflow			*/
+#define TOVF_ERR2		0x00000040	/* Timer 2 Counter Overflow			*/
+#define TOVF_ERR3		0x00000080	/* Timer 3 Counter Overflow			*/
+#define TRUN0			0x00001000	/* Timer 0 Slave Enable Status          */
+#define TRUN1			0x00002000	/* Timer 1 Slave Enable Status          */
+#define TRUN2			0x00004000	/* Timer 2 Slave Enable Status          */
+#define TRUN3			0x00008000	/* Timer 3 Slave Enable Status          */
+#define TIMIL4			0x00010000	/* Timer 4 Interrupt                            */
+#define TIMIL5			0x00020000	/* Timer 5 Interrupt                            */
+#define TIMIL6			0x00040000	/* Timer 6 Interrupt                            */
+#define TIMIL7			0x00080000	/* Timer 7 Interrupt                            */
+#define TOVF_ERR4		0x00100000	/* Timer 4 Counter Overflow			*/
+#define TOVF_ERR5		0x00200000	/* Timer 5 Counter Overflow			*/
+#define TOVF_ERR6		0x00400000	/* Timer 6 Counter Overflow			*/
+#define TOVF_ERR7		0x00800000	/* Timer 7 Counter Overflow			*/
+#define TRUN4			0x10000000	/* Timer 4 Slave Enable Status          */
+#define TRUN5			0x20000000	/* Timer 5 Slave Enable Status          */
+#define TRUN6			0x40000000	/* Timer 6 Slave Enable Status          */
+#define TRUN7			0x80000000	/* Timer 7 Slave Enable Status          */
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+/* TIMERx_CONFIG Masks													*/
+#define PWM_OUT			0x0001	/* Pulse-Width Modulation Output Mode   */
+#define WDTH_CAP		0x0002	/* Width Capture Input Mode                             */
+#define EXT_CLK			0x0003	/* External Clock Mode                                  */
+#define PULSE_HI		0x0004	/* Action Pulse (Positive/Negative*)    */
+#define PERIOD_CNT		0x0008	/* Period Count                                                 */
+#define IRQ_ENA			0x0010	/* Interrupt Request Enable                             */
+#define TIN_SEL			0x0020	/* Timer Input Select                                   */
+#define OUT_DIS			0x0040	/* Output Pad Disable                                   */
+#define CLK_SEL			0x0080	/* Timer Clock Select                                   */
+#define TOGGLE_HI		0x0100	/* PWM_OUT PULSE_HI Toggle Mode                 */
+#define EMU_RUN			0x0200	/* Emulation Behavior Select                    */
+#define ERR_TYP			0xC000	/* Error Type                                                   */
+
+/* ******************   GPIO PORTS F, G, H MASKS  ***********************/
+/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks 				*/
+/* Port F Masks 														*/
+#define PF0		0x0001
+#define PF1		0x0002
+#define PF2		0x0004
+#define PF3		0x0008
+#define PF4		0x0010
+#define PF5		0x0020
+#define PF6		0x0040
+#define PF7		0x0080
+#define PF8		0x0100
+#define PF9		0x0200
+#define PF10	0x0400
+#define PF11	0x0800
+#define PF12	0x1000
+#define PF13	0x2000
+#define PF14	0x4000
+#define PF15	0x8000
+
+/* Port G Masks															*/
+#define PG0		0x0001
+#define PG1		0x0002
+#define PG2		0x0004
+#define PG3		0x0008
+#define PG4		0x0010
+#define PG5		0x0020
+#define PG6		0x0040
+#define PG7		0x0080
+#define PG8		0x0100
+#define PG9		0x0200
+#define PG10	0x0400
+#define PG11	0x0800
+#define PG12	0x1000
+#define PG13	0x2000
+#define PG14	0x4000
+#define PG15	0x8000
+
+/* Port H Masks															*/
+#define PH0		0x0001
+#define PH1		0x0002
+#define PH2		0x0004
+#define PH3		0x0008
+#define PH4		0x0010
+#define PH5		0x0020
+#define PH6		0x0040
+#define PH7		0x0080
+#define PH8		0x0100
+#define PH9		0x0200
+#define PH10	0x0400
+#define PH11	0x0800
+#define PH12	0x1000
+#define PH13	0x2000
+#define PH14	0x4000
+#define PH15	0x8000
+
+/* *******************  SERIAL PORT MASKS  **************************************/
+/* SPORTx_TCR1 Masks															*/
+#define TSPEN		0x0001	/* Transmit Enable                                                              */
+#define ITCLK		0x0002	/* Internal Transmit Clock Select                               */
+#define DTYPE_NORM	0x0004	/* Data Format Normal                                                   */
+#define DTYPE_ULAW	0x0008	/* Compand Using u-Law                                                  */
+#define DTYPE_ALAW	0x000C	/* Compand Using A-Law                                                  */
+#define TLSBIT		0x0010	/* Transmit Bit Order                                                   */
+#define ITFS		0x0200	/* Internal Transmit Frame Sync Select                  */
+#define TFSR		0x0400	/* Transmit Frame Sync Required Select                  */
+#define DITFS		0x0800	/* Data-Independent Transmit Frame Sync Select  */
+#define LTFS		0x1000	/* Low Transmit Frame Sync Select                               */
+#define LATFS		0x2000	/* Late Transmit Frame Sync Select                              */
+#define TCKFE		0x4000	/* Clock Falling Edge Select                                    */
+
+/* SPORTx_TCR2 Masks and Macro													*/
+#define SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length (2 - 31)                                */
+#define TXSE		0x0100	/* TX Secondary Enable                                                  */
+#define TSFSE		0x0200	/* Transmit Stereo Frame Sync Enable                    */
+#define TRFST		0x0400	/* Left/Right Order (1 = Right Channel 1st)             */
+
+/* SPORTx_RCR1 Masks															*/
+#define RSPEN		0x0001	/* Receive Enable                                                               */
+#define IRCLK		0x0002	/* Internal Receive Clock Select                                */
+#define DTYPE_NORM	0x0004	/* Data Format Normal                                                   */
+#define DTYPE_ULAW	0x0008	/* Compand Using u-Law                                                  */
+#define DTYPE_ALAW	0x000C	/* Compand Using A-Law                                                  */
+#define RLSBIT		0x0010	/* Receive Bit Order                                                    */
+#define IRFS		0x0200	/* Internal Receive Frame Sync Select                   */
+#define RFSR		0x0400	/* Receive Frame Sync Required Select                   */
+#define LRFS		0x1000	/* Low Receive Frame Sync Select                                */
+#define LARFS		0x2000	/* Late Receive Frame Sync Select                               */
+#define RCKFE		0x4000	/* Clock Falling Edge Select                                    */
+
+/* SPORTx_RCR2 Masks															*/
+#define SLEN(x)		((x)&0x1F)	/* SPORT RX Word Length (2 - 31)                                */
+#define RXSE		0x0100	/* RX Secondary Enable                                                  */
+#define RSFSE		0x0200	/* RX Stereo Frame Sync Enable                                  */
+#define RRFST		0x0400	/* Right-First Data Order                                               */
+
+/* SPORTx_STAT Masks															*/
+#define RXNE		0x0001	/* Receive FIFO Not Empty Status                                */
+#define RUVF		0x0002	/* Sticky Receive Underflow Status                              */
+#define ROVF		0x0004	/* Sticky Receive Overflow Status                               */
+#define TXF			0x0008	/* Transmit FIFO Full Status                                    */
+#define TUVF		0x0010	/* Sticky Transmit Underflow Status                             */
+#define TOVF		0x0020	/* Sticky Transmit Overflow Status                              */
+#define TXHRE		0x0040	/* Transmit Hold Register Empty                                 */
+
+/* SPORTx_MCMC1 Macros															*/
+#define SP_WOFF(x)		((x) & 0x3FF)	/* Multichannel Window Offset Field                     */
+
+/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits						*/
+#define SP_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1   */
+
+/* SPORTx_MCMC2 Masks															*/
+#define REC_BYPASS	0x0000	/* Bypass Mode (No Clock Recovery)                              */
+#define REC_2FROM4	0x0002	/* Recover 2 MHz Clock from 4 MHz Clock                 */
+#define REC_8FROM16	0x0003	/* Recover 8 MHz Clock from 16 MHz Clock                */
+#define MCDTXPE		0x0004	/* Multichannel DMA Transmit Packing                    */
+#define MCDRXPE		0x0008	/* Multichannel DMA Receive Packing                             */
+#define MCMEN		0x0010	/* Multichannel Frame Mode Enable                               */
+#define FSDR		0x0080	/* Multichannel Frame Sync to Data Relationship */
+#define MFD_0		0x0000	/* Multichannel Frame Delay = 0                                 */
+#define MFD_1		0x1000	/* Multichannel Frame Delay = 1                                 */
+#define MFD_2		0x2000	/* Multichannel Frame Delay = 2                                 */
+#define MFD_3		0x3000	/* Multichannel Frame Delay = 3                                 */
+#define MFD_4		0x4000	/* Multichannel Frame Delay = 4                                 */
+#define MFD_5		0x5000	/* Multichannel Frame Delay = 5                                 */
+#define MFD_6		0x6000	/* Multichannel Frame Delay = 6                                 */
+#define MFD_7		0x7000	/* Multichannel Frame Delay = 7                                 */
+#define MFD_8		0x8000	/* Multichannel Frame Delay = 8                                 */
+#define MFD_9		0x9000	/* Multichannel Frame Delay = 9                                 */
+#define MFD_10		0xA000	/* Multichannel Frame Delay = 10                                */
+#define MFD_11		0xB000	/* Multichannel Frame Delay = 11                                */
+#define MFD_12		0xC000	/* Multichannel Frame Delay = 12                                */
+#define MFD_13		0xD000	/* Multichannel Frame Delay = 13                                */
+#define MFD_14		0xE000	/* Multichannel Frame Delay = 14                                */
+#define MFD_15		0xF000	/* Multichannel Frame Delay = 15                                */
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001	/* Enable CLKOUT                                                                        */
+#define	AMBEN_NONE		0x0000	/* All Banks Disabled                                                           */
+#define AMBEN_B0		0x0002	/* Enable Async Memory Bank 0 only                                      */
+#define AMBEN_B0_B1		0x0004	/* Enable Async Memory Banks 0 & 1 only                         */
+#define AMBEN_B0_B1_B2	0x0006	/* Enable Async Memory Banks 0, 1, and 2                        */
+#define AMBEN_ALL		0x0008	/* Enable Async Memory Banks (all) 0, 1, 2, and 3       */
+
+/* EBIU_AMBCTL0 Masks																	*/
+#define B0RDYEN			0x00000001	/* Bank 0 (B0) RDY Enable                                                   */
+#define B0RDYPOL		0x00000002	/* B0 RDY Active High                                                               */
+#define B0TT_1			0x00000004	/* B0 Transition Time (Read to Write) = 1 cycle             */
+#define B0TT_2			0x00000008	/* B0 Transition Time (Read to Write) = 2 cycles    */
+#define B0TT_3			0x0000000C	/* B0 Transition Time (Read to Write) = 3 cycles    */
+#define B0TT_4			0x00000000	/* B0 Transition Time (Read to Write) = 4 cycles    */
+#define B0ST_1			0x00000010	/* B0 Setup Time (AOE to Read/Write) = 1 cycle              */
+#define B0ST_2			0x00000020	/* B0 Setup Time (AOE to Read/Write) = 2 cycles             */
+#define B0ST_3			0x00000030	/* B0 Setup Time (AOE to Read/Write) = 3 cycles             */
+#define B0ST_4			0x00000000	/* B0 Setup Time (AOE to Read/Write) = 4 cycles             */
+#define B0HT_1			0x00000040	/* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
+#define B0HT_2			0x00000080	/* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
+#define B0HT_3			0x000000C0	/* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
+#define B0HT_0			0x00000000	/* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
+#define B0RAT_1			0x00000100	/* B0 Read Access Time = 1 cycle                                    */
+#define B0RAT_2			0x00000200	/* B0 Read Access Time = 2 cycles                                   */
+#define B0RAT_3			0x00000300	/* B0 Read Access Time = 3 cycles                                   */
+#define B0RAT_4			0x00000400	/* B0 Read Access Time = 4 cycles                                   */
+#define B0RAT_5			0x00000500	/* B0 Read Access Time = 5 cycles                                   */
+#define B0RAT_6			0x00000600	/* B0 Read Access Time = 6 cycles                                   */
+#define B0RAT_7			0x00000700	/* B0 Read Access Time = 7 cycles                                   */
+#define B0RAT_8			0x00000800	/* B0 Read Access Time = 8 cycles                                   */
+#define B0RAT_9			0x00000900	/* B0 Read Access Time = 9 cycles                                   */
+#define B0RAT_10		0x00000A00	/* B0 Read Access Time = 10 cycles                                  */
+#define B0RAT_11		0x00000B00	/* B0 Read Access Time = 11 cycles                                  */
+#define B0RAT_12		0x00000C00	/* B0 Read Access Time = 12 cycles                                  */
+#define B0RAT_13		0x00000D00	/* B0 Read Access Time = 13 cycles                                  */
+#define B0RAT_14		0x00000E00	/* B0 Read Access Time = 14 cycles                                  */
+#define B0RAT_15		0x00000F00	/* B0 Read Access Time = 15 cycles                                  */
+#define B0WAT_1			0x00001000	/* B0 Write Access Time = 1 cycle                                   */
+#define B0WAT_2			0x00002000	/* B0 Write Access Time = 2 cycles                                  */
+#define B0WAT_3			0x00003000	/* B0 Write Access Time = 3 cycles                                  */
+#define B0WAT_4			0x00004000	/* B0 Write Access Time = 4 cycles                                  */
+#define B0WAT_5			0x00005000	/* B0 Write Access Time = 5 cycles                                  */
+#define B0WAT_6			0x00006000	/* B0 Write Access Time = 6 cycles                                  */
+#define B0WAT_7			0x00007000	/* B0 Write Access Time = 7 cycles                                  */
+#define B0WAT_8			0x00008000	/* B0 Write Access Time = 8 cycles                                  */
+#define B0WAT_9			0x00009000	/* B0 Write Access Time = 9 cycles                                  */
+#define B0WAT_10		0x0000A000	/* B0 Write Access Time = 10 cycles                                 */
+#define B0WAT_11		0x0000B000	/* B0 Write Access Time = 11 cycles                                 */
+#define B0WAT_12		0x0000C000	/* B0 Write Access Time = 12 cycles                                 */
+#define B0WAT_13		0x0000D000	/* B0 Write Access Time = 13 cycles                                 */
+#define B0WAT_14		0x0000E000	/* B0 Write Access Time = 14 cycles                                 */
+#define B0WAT_15		0x0000F000	/* B0 Write Access Time = 15 cycles                                 */
+
+#define B1RDYEN			0x00010000	/* Bank 1 (B1) RDY Enable                           */
+#define B1RDYPOL		0x00020000	/* B1 RDY Active High                               */
+#define B1TT_1			0x00040000	/* B1 Transition Time (Read to Write) = 1 cycle     */
+#define B1TT_2			0x00080000	/* B1 Transition Time (Read to Write) = 2 cycles    */
+#define B1TT_3			0x000C0000	/* B1 Transition Time (Read to Write) = 3 cycles    */
+#define B1TT_4			0x00000000	/* B1 Transition Time (Read to Write) = 4 cycles    */
+#define B1ST_1			0x00100000	/* B1 Setup Time (AOE to Read/Write) = 1 cycle      */
+#define B1ST_2			0x00200000	/* B1 Setup Time (AOE to Read/Write) = 2 cycles     */
+#define B1ST_3			0x00300000	/* B1 Setup Time (AOE to Read/Write) = 3 cycles     */
+#define B1ST_4			0x00000000	/* B1 Setup Time (AOE to Read/Write) = 4 cycles     */
+#define B1HT_1			0x00400000	/* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle     */
+#define B1HT_2			0x00800000	/* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
+#define B1HT_3			0x00C00000	/* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
+#define B1HT_0			0x00000000	/* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
+#define B1RAT_1			0x01000000	/* B1 Read Access Time = 1 cycle                                    */
+#define B1RAT_2			0x02000000	/* B1 Read Access Time = 2 cycles                                   */
+#define B1RAT_3			0x03000000	/* B1 Read Access Time = 3 cycles                                   */
+#define B1RAT_4			0x04000000	/* B1 Read Access Time = 4 cycles                                   */
+#define B1RAT_5			0x05000000	/* B1 Read Access Time = 5 cycles                                   */
+#define B1RAT_6			0x06000000	/* B1 Read Access Time = 6 cycles                                   */
+#define B1RAT_7			0x07000000	/* B1 Read Access Time = 7 cycles                                   */
+#define B1RAT_8			0x08000000	/* B1 Read Access Time = 8 cycles                                   */
+#define B1RAT_9			0x09000000	/* B1 Read Access Time = 9 cycles                                   */
+#define B1RAT_10		0x0A000000	/* B1 Read Access Time = 10 cycles                                  */
+#define B1RAT_11		0x0B000000	/* B1 Read Access Time = 11 cycles                                  */
+#define B1RAT_12		0x0C000000	/* B1 Read Access Time = 12 cycles                                  */
+#define B1RAT_13		0x0D000000	/* B1 Read Access Time = 13 cycles                                  */
+#define B1RAT_14		0x0E000000	/* B1 Read Access Time = 14 cycles                                  */
+#define B1RAT_15		0x0F000000	/* B1 Read Access Time = 15 cycles                                  */
+#define B1WAT_1			0x10000000	/* B1 Write Access Time = 1 cycle                                   */
+#define B1WAT_2			0x20000000	/* B1 Write Access Time = 2 cycles                                  */
+#define B1WAT_3			0x30000000	/* B1 Write Access Time = 3 cycles                                  */
+#define B1WAT_4			0x40000000	/* B1 Write Access Time = 4 cycles                                  */
+#define B1WAT_5			0x50000000	/* B1 Write Access Time = 5 cycles                                  */
+#define B1WAT_6			0x60000000	/* B1 Write Access Time = 6 cycles                                  */
+#define B1WAT_7			0x70000000	/* B1 Write Access Time = 7 cycles                                  */
+#define B1WAT_8			0x80000000	/* B1 Write Access Time = 8 cycles                                  */
+#define B1WAT_9			0x90000000	/* B1 Write Access Time = 9 cycles                                  */
+#define B1WAT_10		0xA0000000	/* B1 Write Access Time = 10 cycles                                 */
+#define B1WAT_11		0xB0000000	/* B1 Write Access Time = 11 cycles                                 */
+#define B1WAT_12		0xC0000000	/* B1 Write Access Time = 12 cycles                                 */
+#define B1WAT_13		0xD0000000	/* B1 Write Access Time = 13 cycles                                 */
+#define B1WAT_14		0xE0000000	/* B1 Write Access Time = 14 cycles                                 */
+#define B1WAT_15		0xF0000000	/* B1 Write Access Time = 15 cycles                                 */
+
+/* EBIU_AMBCTL1 Masks																	*/
+#define B2RDYEN			0x00000001	/* Bank 2 (B2) RDY Enable                                                   */
+#define B2RDYPOL		0x00000002	/* B2 RDY Active High                                                               */
+#define B2TT_1			0x00000004	/* B2 Transition Time (Read to Write) = 1 cycle             */
+#define B2TT_2			0x00000008	/* B2 Transition Time (Read to Write) = 2 cycles    */
+#define B2TT_3			0x0000000C	/* B2 Transition Time (Read to Write) = 3 cycles    */
+#define B2TT_4			0x00000000	/* B2 Transition Time (Read to Write) = 4 cycles    */
+#define B2ST_1			0x00000010	/* B2 Setup Time (AOE to Read/Write) = 1 cycle              */
+#define B2ST_2			0x00000020	/* B2 Setup Time (AOE to Read/Write) = 2 cycles             */
+#define B2ST_3			0x00000030	/* B2 Setup Time (AOE to Read/Write) = 3 cycles             */
+#define B2ST_4			0x00000000	/* B2 Setup Time (AOE to Read/Write) = 4 cycles             */
+#define B2HT_1			0x00000040	/* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
+#define B2HT_2			0x00000080	/* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
+#define B2HT_3			0x000000C0	/* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
+#define B2HT_0			0x00000000	/* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
+#define B2RAT_1			0x00000100	/* B2 Read Access Time = 1 cycle                                    */
+#define B2RAT_2			0x00000200	/* B2 Read Access Time = 2 cycles                                   */
+#define B2RAT_3			0x00000300	/* B2 Read Access Time = 3 cycles                                   */
+#define B2RAT_4			0x00000400	/* B2 Read Access Time = 4 cycles                                   */
+#define B2RAT_5			0x00000500	/* B2 Read Access Time = 5 cycles                                   */
+#define B2RAT_6			0x00000600	/* B2 Read Access Time = 6 cycles                                   */
+#define B2RAT_7			0x00000700	/* B2 Read Access Time = 7 cycles                                   */
+#define B2RAT_8			0x00000800	/* B2 Read Access Time = 8 cycles                                   */
+#define B2RAT_9			0x00000900	/* B2 Read Access Time = 9 cycles                                   */
+#define B2RAT_10		0x00000A00	/* B2 Read Access Time = 10 cycles                                  */
+#define B2RAT_11		0x00000B00	/* B2 Read Access Time = 11 cycles                                  */
+#define B2RAT_12		0x00000C00	/* B2 Read Access Time = 12 cycles                                  */
+#define B2RAT_13		0x00000D00	/* B2 Read Access Time = 13 cycles                                  */
+#define B2RAT_14		0x00000E00	/* B2 Read Access Time = 14 cycles                                  */
+#define B2RAT_15		0x00000F00	/* B2 Read Access Time = 15 cycles                                  */
+#define B2WAT_1			0x00001000	/* B2 Write Access Time = 1 cycle                                   */
+#define B2WAT_2			0x00002000	/* B2 Write Access Time = 2 cycles                                  */
+#define B2WAT_3			0x00003000	/* B2 Write Access Time = 3 cycles                                  */
+#define B2WAT_4			0x00004000	/* B2 Write Access Time = 4 cycles                                  */
+#define B2WAT_5			0x00005000	/* B2 Write Access Time = 5 cycles                                  */
+#define B2WAT_6			0x00006000	/* B2 Write Access Time = 6 cycles                                  */
+#define B2WAT_7			0x00007000	/* B2 Write Access Time = 7 cycles                                  */
+#define B2WAT_8			0x00008000	/* B2 Write Access Time = 8 cycles                                  */
+#define B2WAT_9			0x00009000	/* B2 Write Access Time = 9 cycles                                  */
+#define B2WAT_10		0x0000A000	/* B2 Write Access Time = 10 cycles                                 */
+#define B2WAT_11		0x0000B000	/* B2 Write Access Time = 11 cycles                                 */
+#define B2WAT_12		0x0000C000	/* B2 Write Access Time = 12 cycles                                 */
+#define B2WAT_13		0x0000D000	/* B2 Write Access Time = 13 cycles                                 */
+#define B2WAT_14		0x0000E000	/* B2 Write Access Time = 14 cycles                                 */
+#define B2WAT_15		0x0000F000	/* B2 Write Access Time = 15 cycles                                 */
+
+#define B3RDYEN			0x00010000	/* Bank 3 (B3) RDY Enable                                                   */
+#define B3RDYPOL		0x00020000	/* B3 RDY Active High                                                               */
+#define B3TT_1			0x00040000	/* B3 Transition Time (Read to Write) = 1 cycle             */
+#define B3TT_2			0x00080000	/* B3 Transition Time (Read to Write) = 2 cycles    */
+#define B3TT_3			0x000C0000	/* B3 Transition Time (Read to Write) = 3 cycles    */
+#define B3TT_4			0x00000000	/* B3 Transition Time (Read to Write) = 4 cycles    */
+#define B3ST_1			0x00100000	/* B3 Setup Time (AOE to Read/Write) = 1 cycle              */
+#define B3ST_2			0x00200000	/* B3 Setup Time (AOE to Read/Write) = 2 cycles             */
+#define B3ST_3			0x00300000	/* B3 Setup Time (AOE to Read/Write) = 3 cycles             */
+#define B3ST_4			0x00000000	/* B3 Setup Time (AOE to Read/Write) = 4 cycles             */
+#define B3HT_1			0x00400000	/* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle             */
+#define B3HT_2			0x00800000	/* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles    */
+#define B3HT_3			0x00C00000	/* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles    */
+#define B3HT_0			0x00000000	/* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles    */
+#define B3RAT_1			0x01000000	/* B3 Read Access Time = 1 cycle                                    */
+#define B3RAT_2			0x02000000	/* B3 Read Access Time = 2 cycles                                   */
+#define B3RAT_3			0x03000000	/* B3 Read Access Time = 3 cycles                                   */
+#define B3RAT_4			0x04000000	/* B3 Read Access Time = 4 cycles                                   */
+#define B3RAT_5			0x05000000	/* B3 Read Access Time = 5 cycles                                   */
+#define B3RAT_6			0x06000000	/* B3 Read Access Time = 6 cycles                                   */
+#define B3RAT_7			0x07000000	/* B3 Read Access Time = 7 cycles                                   */
+#define B3RAT_8			0x08000000	/* B3 Read Access Time = 8 cycles                                   */
+#define B3RAT_9			0x09000000	/* B3 Read Access Time = 9 cycles                                   */
+#define B3RAT_10		0x0A000000	/* B3 Read Access Time = 10 cycles                                  */
+#define B3RAT_11		0x0B000000	/* B3 Read Access Time = 11 cycles                                  */
+#define B3RAT_12		0x0C000000	/* B3 Read Access Time = 12 cycles                                  */
+#define B3RAT_13		0x0D000000	/* B3 Read Access Time = 13 cycles                                  */
+#define B3RAT_14		0x0E000000	/* B3 Read Access Time = 14 cycles                                  */
+#define B3RAT_15		0x0F000000	/* B3 Read Access Time = 15 cycles                                  */
+#define B3WAT_1			0x10000000	/* B3 Write Access Time = 1 cycle                                   */
+#define B3WAT_2			0x20000000	/* B3 Write Access Time = 2 cycles                                  */
+#define B3WAT_3			0x30000000	/* B3 Write Access Time = 3 cycles                                  */
+#define B3WAT_4			0x40000000	/* B3 Write Access Time = 4 cycles                                  */
+#define B3WAT_5			0x50000000	/* B3 Write Access Time = 5 cycles                                  */
+#define B3WAT_6			0x60000000	/* B3 Write Access Time = 6 cycles                                  */
+#define B3WAT_7			0x70000000	/* B3 Write Access Time = 7 cycles                                  */
+#define B3WAT_8			0x80000000	/* B3 Write Access Time = 8 cycles                                  */
+#define B3WAT_9			0x90000000	/* B3 Write Access Time = 9 cycles                                  */
+#define B3WAT_10		0xA0000000	/* B3 Write Access Time = 10 cycles                                 */
+#define B3WAT_11		0xB0000000	/* B3 Write Access Time = 11 cycles                                 */
+#define B3WAT_12		0xC0000000	/* B3 Write Access Time = 12 cycles                                 */
+#define B3WAT_13		0xD0000000	/* B3 Write Access Time = 13 cycles                                 */
+#define B3WAT_14		0xE0000000	/* B3 Write Access Time = 14 cycles                                 */
+#define B3WAT_15		0xF0000000	/* B3 Write Access Time = 15 cycles                                 */
+
+/* **********************  SDRAM CONTROLLER MASKS  **********************************************/
+/* EBIU_SDGCTL Masks																			*/
+#define SCTLE			0x00000001	/* Enable SDRAM Signals                                                                         */
+#define CL_2			0x00000008	/* SDRAM CAS Latency = 2 cycles                                                         */
+#define CL_3			0x0000000C	/* SDRAM CAS Latency = 3 cycles                                                         */
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh                          */
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh            */
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh                       */
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle                                                                         */
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles                                                                        */
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles                                                                        */
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles                                                                        */
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles                                                                        */
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles                                                                        */
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles                                                                        */
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles                                                                        */
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles                                                                        */
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles                                                                       */
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles                                                                       */
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles                                                                       */
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles                                                                       */
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles                                                                       */
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles                                                                       */
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle                                                                          */
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles                                                                         */
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles                                                                         */
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles                                                                         */
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles                                                                         */
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles                                                                         */
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles                                                                         */
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle                                                                         */
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles                                                                        */
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles                                                                        */
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles                                                                        */
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles                                                                        */
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles                                                                        */
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles                                                                        */
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle                                                                          */
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles                                                                         */
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles                                                                         */
+#define PUPSD			0x00200000	/* Power-Up Start Delay (15 SCLK Cycles Delay)                          */
+#define PSM				0x00400000	/* Power-Up Sequence (Mode Register Before/After* Refresh)      */
+#define PSS				0x00800000	/* Enable Power-Up Sequence on Next SDRAM Access                        */
+#define SRFS			0x01000000	/* Enable SDRAM Self-Refresh Mode                                                       */
+#define EBUFE			0x02000000	/* Enable External Buffering Timing                                                     */
+#define FBBRW			0x04000000	/* Enable Fast Back-To-Back Read To Write                                       */
+#define EMREN			0x10000000	/* Extended Mode Register Enable                                                        */
+#define TCSR			0x20000000	/* Temp-Compensated Self-Refresh Value (85/45* Deg C)           */
+#define CDDBG			0x40000000	/* Tristate SDRAM Controls During Bus Grant                                     */
+
+/* EBIU_SDBCTL Masks																		*/
+#define EBE				0x0001	/* Enable SDRAM External Bank                                                   */
+#define EBSZ_16			0x0000	/* SDRAM External Bank Size = 16MB                                              */
+#define EBSZ_32			0x0002	/* SDRAM External Bank Size = 32MB                                              */
+#define EBSZ_64			0x0004	/* SDRAM External Bank Size = 64MB                                              */
+#define EBSZ_128		0x0006	/* SDRAM External Bank Size = 128MB                                             */
+#define EBSZ_256		0x0008		/* SDRAM External Bank Size = 256MB 	*/
+#define EBSZ_512		0x000A		/* SDRAM External Bank Size = 512MB		*/
+#define EBCAW_8			0x0000	/* SDRAM External Bank Column Address Width = 8 Bits    */
+#define EBCAW_9			0x0010	/* SDRAM External Bank Column Address Width = 9 Bits    */
+#define EBCAW_10		0x0020	/* SDRAM External Bank Column Address Width = 10 Bits   */
+#define EBCAW_11		0x0030	/* SDRAM External Bank Column Address Width = 11 Bits   */
+
+/* EBIU_SDSTAT Masks														*/
+#define SDCI			0x0001	/* SDRAM Controller Idle                                */
+#define SDSRA			0x0002	/* SDRAM Self-Refresh Active                    */
+#define SDPUA			0x0004	/* SDRAM Power-Up Active                                */
+#define SDRS			0x0008	/* SDRAM Will Power-Up On Next Access   */
+#define SDEASE			0x0010	/* SDRAM EAB Sticky Error Status                */
+#define BGSTAT			0x0020	/* Bus Grant Status                                             */
+
+/* **************************  DMA CONTROLLER MASKS  ********************************/
+/* DMAx_CONFIG, MDMA_yy_CONFIG Masks												*/
+#define DMAEN			0x0001	/* DMA Channel Enable                                                   */
+#define WNR				0x0002	/* Channel Direction (W/R*)                                             */
+#define WDSIZE_8		0x0000	/* Transfer Word Size = 8                                               */
+#define WDSIZE_16		0x0004	/* Transfer Word Size = 16                                              */
+#define WDSIZE_32		0x0008	/* Transfer Word Size = 32                                              */
+#define DMA2D			0x0010	/* DMA Mode (2D/1D*)                                                    */
+#define RESTART			0x0020	/* DMA Buffer Clear                                                             */
+#define DI_SEL			0x0040	/* Data Interrupt Timing Select                                 */
+#define DI_EN			0x0080	/* Data Interrupt Enable                                                */
+#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)   */
+#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1                                             */
+#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2                                             */
+#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3                                             */
+#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4                                             */
+#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5                                             */
+#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6                                             */
+#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7                                             */
+#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8                                             */
+#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9                                             */
+#define NDSIZE	        	0x0900	/* Next Descriptor Size */
+
+#define DMAFLOW	        	0x7000	/* Flow Control */
+#define DMAFLOW_STOP		0x0000	/* Stop Mode */
+#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
+#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
+#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
+#define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)      */
+#define PMAP			0xF000	/* Peripheral Mapped To This Channel                            */
+#define PMAP_PPI		0x0000	/*              PPI Port DMA                                                            */
+#define	PMAP_EMACRX		0x1000	/*              Ethernet Receive DMA                                            */
+#define PMAP_EMACTX		0x2000	/*              Ethernet Transmit DMA                                           */
+#define PMAP_SPORT0RX	0x3000	/*              SPORT0 Receive DMA                                                      */
+#define PMAP_SPORT0TX	0x4000	/*              SPORT0 Transmit DMA                                                     */
+#define PMAP_SPORT1RX	0x5000	/*              SPORT1 Receive DMA                                                      */
+#define PMAP_SPORT1TX	0x6000	/*              SPORT1 Transmit DMA                                                     */
+#define PMAP_SPI		0x7000	/*              SPI Port DMA                                                            */
+#define PMAP_UART0RX	0x8000	/*              UART0 Port Receive DMA                                          */
+#define PMAP_UART0TX	0x9000	/*              UART0 Port Transmit DMA                                         */
+#define	PMAP_UART1RX	0xA000	/*              UART1 Port Receive DMA                                          */
+#define	PMAP_UART1TX	0xB000	/*              UART1 Port Transmit DMA                                         */
+
+/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks						*/
+#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status      */
+#define DMA_ERR			0x0002	/* DMA Error Interrupt Status           */
+#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator       */
+#define DMA_RUN			0x0008	/* DMA Channel Running Indicator        */
+
+/*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
+/*  PPI_CONTROL Masks													*/
+#define PORT_EN			0x0001	/* PPI Port Enable                                      */
+#define PORT_DIR		0x0002	/* PPI Port Direction                           */
+#define XFR_TYPE		0x000C	/* PPI Transfer Type                            */
+#define PORT_CFG		0x0030	/* PPI Port Configuration                       */
+#define FLD_SEL			0x0040	/* PPI Active Field Select                      */
+#define PACK_EN			0x0080	/* PPI Packing Mode                                     */
+#define DMA32			0x0100	/* PPI 32-bit DMA Enable                        */
+#define SKIP_EN			0x0200	/* PPI Skip Element Enable                      */
+#define SKIP_EO			0x0400	/* PPI Skip Even/Odd Elements           */
+#define DLENGTH         0x3800	/* PPI Data Length  */
+#define DLEN_8			0x0000	/* Data Length = 8 Bits                         */
+#define DLEN_10			0x0800	/* Data Length = 10 Bits                        */
+#define DLEN_11			0x1000	/* Data Length = 11 Bits                        */
+#define DLEN_12			0x1800	/* Data Length = 12 Bits                        */
+#define DLEN_13			0x2000	/* Data Length = 13 Bits                        */
+#define DLEN_14			0x2800	/* Data Length = 14 Bits                        */
+#define DLEN_15			0x3000	/* Data Length = 15 Bits                        */
+#define DLEN_16			0x3800	/* Data Length = 16 Bits                        */
+#define POLC			0x4000	/* PPI Clock Polarity                           */
+#define POLS			0x8000	/* PPI Frame Sync Polarity                      */
+
+/* PPI_STATUS Masks														*/
+#define FLD				0x0400	/* Field Indicator                                      */
+#define FT_ERR			0x0800	/* Frame Track Error                            */
+#define OVR				0x1000	/* FIFO Overflow Error                          */
+#define UNDR			0x2000	/* FIFO Underrun Error                          */
+#define ERR_DET			0x4000	/* Error Detected Indicator                     */
+#define ERR_NCOR		0x8000	/* Error Not Corrected Indicator        */
+
+/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
+#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low                    */
+#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low                 */
+
+/* TWI_PRESCALE Masks															*/
+#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz)    */
+#define	TWI_ENA		0x0080	/* TWI Enable                                                                   */
+#define	SCCB		0x0200	/* SCCB Compatibility Enable                                    */
+
+/* TWI_SLAVE_CTRL Masks															*/
+#define	SEN			0x0001	/* Slave Enable                                                                 */
+#define	SADD_LEN	0x0002	/* Slave Address Length                                                 */
+#define	STDVAL		0x0004	/* Slave Transmit Data Valid                                    */
+#define	NAK			0x0008	/* NAK/ACK* Generated At Conclusion Of Transfer */
+#define	GEN			0x0010	/* General Call Adrress Matching Enabled                */
+
+/* TWI_SLAVE_STAT Masks															*/
+#define	SDIR		0x0001	/* Slave Transfer Direction (Transmit/Receive*) */
+#define GCALL		0x0002	/* General Call Indicator                                               */
+
+/* TWI_MASTER_CTRL Masks													*/
+#define	MEN			0x0001	/* Master Mode Enable                                           */
+#define	MADD_LEN	0x0002	/* Master Address Length                                        */
+#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*)           */
+#define	FAST		0x0008	/* Use Fast Mode Timing Specs                           */
+#define	STOP		0x0010	/* Issue Stop Condition                                         */
+#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer     */
+#define	DCNT		0x3FC0	/* Data Bytes To Transfer                                       */
+#define	SDAOVR		0x4000	/* Serial Data Override                                         */
+#define	SCLOVR		0x8000	/* Serial Clock Override                                        */
+
+/* TWI_MASTER_STAT Masks														*/
+#define	MPROG		0x0001	/* Master Transfer In Progress                                  */
+#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted)    */
+#define	ANAK		0x0004	/* Address Not Acknowledged                                             */
+#define	DNAK		0x0008	/* Data Not Acknowledged                                                */
+#define	BUFRDERR	0x0010	/* Buffer Read Error                                                    */
+#define	BUFWRERR	0x0020	/* Buffer Write Error                                                   */
+#define	SDASEN		0x0040	/* Serial Data Sense                                                    */
+#define	SCLSEN		0x0080	/* Serial Clock Sense                                                   */
+#define	BUSBUSY		0x0100	/* Bus Busy Indicator                                                   */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
+#define	SINIT		0x0001	/* Slave Transfer Initiated     */
+#define	SCOMP		0x0002	/* Slave Transfer Complete      */
+#define	SERR		0x0004	/* Slave Transfer Error         */
+#define	SOVF		0x0008	/* Slave Overflow                       */
+#define	MCOMP		0x0010	/* Master Transfer Complete     */
+#define	MERR		0x0020	/* Master Transfer Error        */
+#define	XMTSERV		0x0040	/* Transmit FIFO Service        */
+#define	RCVSERV		0x0080	/* Receive FIFO Service         */
+
+/* TWI_FIFO_CTRL Masks												*/
+#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                        */
+#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                         */
+#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length     */
+#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length      */
+
+/* TWI_FIFO_STAT Masks															*/
+#define	XMTSTAT		0x0003	/* Transmit FIFO Status                                                 */
+#define	XMT_EMPTY	0x0000	/*              Transmit FIFO Empty                                             */
+#define	XMT_HALF	0x0001	/*              Transmit FIFO Has 1 Byte To Write               */
+#define	XMT_FULL	0x0003	/*              Transmit FIFO Full (2 Bytes To Write)   */
+
+#define	RCVSTAT		0x000C	/* Receive FIFO Status                                                  */
+#define	RCV_EMPTY	0x0000	/*              Receive FIFO Empty                                              */
+#define	RCV_HALF	0x0004	/*              Receive FIFO Has 1 Byte To Read                 */
+#define	RCV_FULL	0x000C	/*              Receive FIFO Full (2 Bytes To Read)             */
+
+/* ************  CONTROLLER AREA NETWORK (CAN) MASKS  ***************/
+/* CAN_CONTROL Masks												*/
+#define	SRS			0x0001	/* Software Reset                                               */
+#define	DNM			0x0002	/* Device Net Mode                                              */
+#define	ABO			0x0004	/* Auto-Bus On Enable                                   */
+#define	TXPRIO		0x0008	/* TX Priority (Priority/Mailbox*)              */
+#define	WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable   */
+#define	SMR			0x0020	/* Sleep Mode Request                                   */
+#define	CSR			0x0040	/* CAN Suspend Mode Request                             */
+#define	CCR			0x0080	/* CAN Configuration Mode Request               */
+
+/* CAN_STATUS Masks												*/
+#define	WT			0x0001	/* TX Warning Flag                                      */
+#define	WR			0x0002	/* RX Warning Flag                                      */
+#define	EP			0x0004	/* Error Passive Mode                           */
+#define	EBO			0x0008	/* Error Bus Off Mode                           */
+#define	SMA			0x0020	/* Sleep Mode Acknowledge                       */
+#define	CSA			0x0040	/* Suspend Mode Acknowledge                     */
+#define	CCA			0x0080	/* Configuration Mode Acknowledge       */
+#define	MBPTR		0x1F00	/* Mailbox Pointer                                      */
+#define	TRM			0x4000	/* Transmit Mode                                        */
+#define	REC			0x8000	/* Receive Mode                                         */
+
+/* CAN_CLOCK Masks									*/
+#define	BRP			0x03FF	/* Bit-Rate Pre-Scaler  */
+
+/* CAN_TIMING Masks											*/
+#define	TSEG1		0x000F	/* Time Segment 1                               */
+#define	TSEG2		0x0070	/* Time Segment 2                               */
+#define	SAM			0x0080	/* Sampling                                             */
+#define	SJW			0x0300	/* Synchronization Jump Width   */
+
+/* CAN_DEBUG Masks											*/
+#define	DEC			0x0001	/* Disable CAN Error Counters   */
+#define	DRI			0x0002	/* Disable CAN RX Input                 */
+#define	DTO			0x0004	/* Disable CAN TX Output                */
+#define	DIL			0x0008	/* Disable CAN Internal Loop    */
+#define	MAA			0x0010	/* Mode Auto-Acknowledge Enable */
+#define	MRB			0x0020	/* Mode Read Back Enable                */
+#define	CDE			0x8000	/* CAN Debug Enable                             */
+
+/* CAN_CEC Masks										*/
+#define	RXECNT		0x00FF	/* Receive Error Counter        */
+#define	TXECNT		0xFF00	/* Transmit Error Counter       */
+
+/* CAN_INTR Masks											*/
+#define	MBRIRQ	0x0001	/* Mailbox Receive Interrupt	*/
+#define	MBRIF		MBRIRQ	/* legacy */
+#define	MBTIRQ	0x0002	/* Mailbox Transmit Interrupt	*/
+#define	MBTIF		MBTIRQ	/* legacy */
+#define	GIRQ		0x0004	/* Global Interrupt                             */
+#define	SMACK		0x0008	/* Sleep Mode Acknowledge               */
+#define	CANTX		0x0040	/* CAN TX Bus Value                             */
+#define	CANRX		0x0080	/* CAN RX Bus Value                             */
+
+/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks										*/
+#define DFC			0xFFFF	/* Data Filtering Code (If Enabled) (ID0)               */
+#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (ID0)   */
+#define	EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (ID1)    */
+#define	BASEID		0x1FFC	/* Base Identifier                                                              */
+#define	IDE			0x2000	/* Identifier Extension                                                 */
+#define	RTR			0x4000	/* Remote Frame Transmission Request                    */
+#define	AME			0x8000	/* Acceptance Mask Enable                                               */
+
+/* CAN_MBxx_TIMESTAMP Masks					*/
+#define TSV			0xFFFF	/* Timestamp    */
+
+/* CAN_MBxx_LENGTH Masks						*/
+#define DLC			0x000F	/* Data Length Code     */
+
+/* CAN_AMxxH and CAN_AMxxL Masks												*/
+#define DFM			0xFFFF	/* Data Field Mask (If Enabled) (CAN_AMxxL)                     */
+#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (CAN_AMxxL)     */
+#define	EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (CAN_AMxxH)      */
+#define	BASEID		0x1FFC	/* Base Identifier                                                                      */
+#define	AMIDE		0x2000	/* Acceptance Mask ID Extension Enable                          */
+#define	FMD			0x4000	/* Full Mask Data Field Enable                                          */
+#define	FDF			0x8000	/* Filter On Data Field Enable                                          */
+
+/* CAN_MC1 Masks									*/
+#define	MC0			0x0001	/* Enable Mailbox 0             */
+#define	MC1			0x0002	/* Enable Mailbox 1             */
+#define	MC2			0x0004	/* Enable Mailbox 2             */
+#define	MC3			0x0008	/* Enable Mailbox 3             */
+#define	MC4			0x0010	/* Enable Mailbox 4             */
+#define	MC5			0x0020	/* Enable Mailbox 5             */
+#define	MC6			0x0040	/* Enable Mailbox 6             */
+#define	MC7			0x0080	/* Enable Mailbox 7             */
+#define	MC8			0x0100	/* Enable Mailbox 8             */
+#define	MC9			0x0200	/* Enable Mailbox 9             */
+#define	MC10		0x0400	/* Enable Mailbox 10    */
+#define	MC11		0x0800	/* Enable Mailbox 11    */
+#define	MC12		0x1000	/* Enable Mailbox 12    */
+#define	MC13		0x2000	/* Enable Mailbox 13    */
+#define	MC14		0x4000	/* Enable Mailbox 14    */
+#define	MC15		0x8000	/* Enable Mailbox 15    */
+
+/* CAN_MC2 Masks									*/
+#define	MC16		0x0001	/* Enable Mailbox 16    */
+#define	MC17		0x0002	/* Enable Mailbox 17    */
+#define	MC18		0x0004	/* Enable Mailbox 18    */
+#define	MC19		0x0008	/* Enable Mailbox 19    */
+#define	MC20		0x0010	/* Enable Mailbox 20    */
+#define	MC21		0x0020	/* Enable Mailbox 21    */
+#define	MC22		0x0040	/* Enable Mailbox 22    */
+#define	MC23		0x0080	/* Enable Mailbox 23    */
+#define	MC24		0x0100	/* Enable Mailbox 24    */
+#define	MC25		0x0200	/* Enable Mailbox 25    */
+#define	MC26		0x0400	/* Enable Mailbox 26    */
+#define	MC27		0x0800	/* Enable Mailbox 27    */
+#define	MC28		0x1000	/* Enable Mailbox 28    */
+#define	MC29		0x2000	/* Enable Mailbox 29    */
+#define	MC30		0x4000	/* Enable Mailbox 30    */
+#define	MC31		0x8000	/* Enable Mailbox 31    */
+
+/* CAN_MD1 Masks												*/
+#define	MD0			0x0001	/* Enable Mailbox 0 For Receive         */
+#define	MD1			0x0002	/* Enable Mailbox 1 For Receive         */
+#define	MD2			0x0004	/* Enable Mailbox 2 For Receive         */
+#define	MD3			0x0008	/* Enable Mailbox 3 For Receive         */
+#define	MD4			0x0010	/* Enable Mailbox 4 For Receive         */
+#define	MD5			0x0020	/* Enable Mailbox 5 For Receive         */
+#define	MD6			0x0040	/* Enable Mailbox 6 For Receive         */
+#define	MD7			0x0080	/* Enable Mailbox 7 For Receive         */
+#define	MD8			0x0100	/* Enable Mailbox 8 For Receive         */
+#define	MD9			0x0200	/* Enable Mailbox 9 For Receive         */
+#define	MD10		0x0400	/* Enable Mailbox 10 For Receive        */
+#define	MD11		0x0800	/* Enable Mailbox 11 For Receive        */
+#define	MD12		0x1000	/* Enable Mailbox 12 For Receive        */
+#define	MD13		0x2000	/* Enable Mailbox 13 For Receive        */
+#define	MD14		0x4000	/* Enable Mailbox 14 For Receive        */
+#define	MD15		0x8000	/* Enable Mailbox 15 For Receive        */
+
+/* CAN_MD2 Masks												*/
+#define	MD16		0x0001	/* Enable Mailbox 16 For Receive        */
+#define	MD17		0x0002	/* Enable Mailbox 17 For Receive        */
+#define	MD18		0x0004	/* Enable Mailbox 18 For Receive        */
+#define	MD19		0x0008	/* Enable Mailbox 19 For Receive        */
+#define	MD20		0x0010	/* Enable Mailbox 20 For Receive        */
+#define	MD21		0x0020	/* Enable Mailbox 21 For Receive        */
+#define	MD22		0x0040	/* Enable Mailbox 22 For Receive        */
+#define	MD23		0x0080	/* Enable Mailbox 23 For Receive        */
+#define	MD24		0x0100	/* Enable Mailbox 24 For Receive        */
+#define	MD25		0x0200	/* Enable Mailbox 25 For Receive        */
+#define	MD26		0x0400	/* Enable Mailbox 26 For Receive        */
+#define	MD27		0x0800	/* Enable Mailbox 27 For Receive        */
+#define	MD28		0x1000	/* Enable Mailbox 28 For Receive        */
+#define	MD29		0x2000	/* Enable Mailbox 29 For Receive        */
+#define	MD30		0x4000	/* Enable Mailbox 30 For Receive        */
+#define	MD31		0x8000	/* Enable Mailbox 31 For Receive        */
+
+/* CAN_RMP1 Masks												*/
+#define	RMP0		0x0001	/* RX Message Pending In Mailbox 0      */
+#define	RMP1		0x0002	/* RX Message Pending In Mailbox 1      */
+#define	RMP2		0x0004	/* RX Message Pending In Mailbox 2      */
+#define	RMP3		0x0008	/* RX Message Pending In Mailbox 3      */
+#define	RMP4		0x0010	/* RX Message Pending In Mailbox 4      */
+#define	RMP5		0x0020	/* RX Message Pending In Mailbox 5      */
+#define	RMP6		0x0040	/* RX Message Pending In Mailbox 6      */
+#define	RMP7		0x0080	/* RX Message Pending In Mailbox 7      */
+#define	RMP8		0x0100	/* RX Message Pending In Mailbox 8      */
+#define	RMP9		0x0200	/* RX Message Pending In Mailbox 9      */
+#define	RMP10		0x0400	/* RX Message Pending In Mailbox 10     */
+#define	RMP11		0x0800	/* RX Message Pending In Mailbox 11     */
+#define	RMP12		0x1000	/* RX Message Pending In Mailbox 12     */
+#define	RMP13		0x2000	/* RX Message Pending In Mailbox 13     */
+#define	RMP14		0x4000	/* RX Message Pending In Mailbox 14     */
+#define	RMP15		0x8000	/* RX Message Pending In Mailbox 15     */
+
+/* CAN_RMP2 Masks												*/
+#define	RMP16		0x0001	/* RX Message Pending In Mailbox 16     */
+#define	RMP17		0x0002	/* RX Message Pending In Mailbox 17     */
+#define	RMP18		0x0004	/* RX Message Pending In Mailbox 18     */
+#define	RMP19		0x0008	/* RX Message Pending In Mailbox 19     */
+#define	RMP20		0x0010	/* RX Message Pending In Mailbox 20     */
+#define	RMP21		0x0020	/* RX Message Pending In Mailbox 21     */
+#define	RMP22		0x0040	/* RX Message Pending In Mailbox 22     */
+#define	RMP23		0x0080	/* RX Message Pending In Mailbox 23     */
+#define	RMP24		0x0100	/* RX Message Pending In Mailbox 24     */
+#define	RMP25		0x0200	/* RX Message Pending In Mailbox 25     */
+#define	RMP26		0x0400	/* RX Message Pending In Mailbox 26     */
+#define	RMP27		0x0800	/* RX Message Pending In Mailbox 27     */
+#define	RMP28		0x1000	/* RX Message Pending In Mailbox 28     */
+#define	RMP29		0x2000	/* RX Message Pending In Mailbox 29     */
+#define	RMP30		0x4000	/* RX Message Pending In Mailbox 30     */
+#define	RMP31		0x8000	/* RX Message Pending In Mailbox 31     */
+
+/* CAN_RML1 Masks												*/
+#define	RML0		0x0001	/* RX Message Lost In Mailbox 0         */
+#define	RML1		0x0002	/* RX Message Lost In Mailbox 1         */
+#define	RML2		0x0004	/* RX Message Lost In Mailbox 2         */
+#define	RML3		0x0008	/* RX Message Lost In Mailbox 3         */
+#define	RML4		0x0010	/* RX Message Lost In Mailbox 4         */
+#define	RML5		0x0020	/* RX Message Lost In Mailbox 5         */
+#define	RML6		0x0040	/* RX Message Lost In Mailbox 6         */
+#define	RML7		0x0080	/* RX Message Lost In Mailbox 7         */
+#define	RML8		0x0100	/* RX Message Lost In Mailbox 8         */
+#define	RML9		0x0200	/* RX Message Lost In Mailbox 9         */
+#define	RML10		0x0400	/* RX Message Lost In Mailbox 10        */
+#define	RML11		0x0800	/* RX Message Lost In Mailbox 11        */
+#define	RML12		0x1000	/* RX Message Lost In Mailbox 12        */
+#define	RML13		0x2000	/* RX Message Lost In Mailbox 13        */
+#define	RML14		0x4000	/* RX Message Lost In Mailbox 14        */
+#define	RML15		0x8000	/* RX Message Lost In Mailbox 15        */
+
+/* CAN_RML2 Masks												*/
+#define	RML16		0x0001	/* RX Message Lost In Mailbox 16        */
+#define	RML17		0x0002	/* RX Message Lost In Mailbox 17        */
+#define	RML18		0x0004	/* RX Message Lost In Mailbox 18        */
+#define	RML19		0x0008	/* RX Message Lost In Mailbox 19        */
+#define	RML20		0x0010	/* RX Message Lost In Mailbox 20        */
+#define	RML21		0x0020	/* RX Message Lost In Mailbox 21        */
+#define	RML22		0x0040	/* RX Message Lost In Mailbox 22        */
+#define	RML23		0x0080	/* RX Message Lost In Mailbox 23        */
+#define	RML24		0x0100	/* RX Message Lost In Mailbox 24        */
+#define	RML25		0x0200	/* RX Message Lost In Mailbox 25        */
+#define	RML26		0x0400	/* RX Message Lost In Mailbox 26        */
+#define	RML27		0x0800	/* RX Message Lost In Mailbox 27        */
+#define	RML28		0x1000	/* RX Message Lost In Mailbox 28        */
+#define	RML29		0x2000	/* RX Message Lost In Mailbox 29        */
+#define	RML30		0x4000	/* RX Message Lost In Mailbox 30        */
+#define	RML31		0x8000	/* RX Message Lost In Mailbox 31        */
+
+/* CAN_OPSS1 Masks																				*/
+#define	OPSS0		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0       */
+#define	OPSS1		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1       */
+#define	OPSS2		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2       */
+#define	OPSS3		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3       */
+#define	OPSS4		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4       */
+#define	OPSS5		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5       */
+#define	OPSS6		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6       */
+#define	OPSS7		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7       */
+#define	OPSS8		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8       */
+#define	OPSS9		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9       */
+#define	OPSS10		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10      */
+#define	OPSS11		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11      */
+#define	OPSS12		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12      */
+#define	OPSS13		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13      */
+#define	OPSS14		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14      */
+#define	OPSS15		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15      */
+
+/* CAN_OPSS2 Masks																				*/
+#define	OPSS16		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16      */
+#define	OPSS17		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17      */
+#define	OPSS18		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18      */
+#define	OPSS19		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19      */
+#define	OPSS20		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20      */
+#define	OPSS21		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21      */
+#define	OPSS22		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22      */
+#define	OPSS23		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23      */
+#define	OPSS24		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24      */
+#define	OPSS25		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25      */
+#define	OPSS26		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26      */
+#define	OPSS27		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27      */
+#define	OPSS28		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28      */
+#define	OPSS29		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29      */
+#define	OPSS30		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30      */
+#define	OPSS31		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31      */
+
+/* CAN_TRR1 Masks														*/
+#define	TRR0		0x0001	/* Deny But Don't Lock Access To Mailbox 0      */
+#define	TRR1		0x0002	/* Deny But Don't Lock Access To Mailbox 1      */
+#define	TRR2		0x0004	/* Deny But Don't Lock Access To Mailbox 2      */
+#define	TRR3		0x0008	/* Deny But Don't Lock Access To Mailbox 3      */
+#define	TRR4		0x0010	/* Deny But Don't Lock Access To Mailbox 4      */
+#define	TRR5		0x0020	/* Deny But Don't Lock Access To Mailbox 5      */
+#define	TRR6		0x0040	/* Deny But Don't Lock Access To Mailbox 6      */
+#define	TRR7		0x0080	/* Deny But Don't Lock Access To Mailbox 7      */
+#define	TRR8		0x0100	/* Deny But Don't Lock Access To Mailbox 8      */
+#define	TRR9		0x0200	/* Deny But Don't Lock Access To Mailbox 9      */
+#define	TRR10		0x0400	/* Deny But Don't Lock Access To Mailbox 10     */
+#define	TRR11		0x0800	/* Deny But Don't Lock Access To Mailbox 11     */
+#define	TRR12		0x1000	/* Deny But Don't Lock Access To Mailbox 12     */
+#define	TRR13		0x2000	/* Deny But Don't Lock Access To Mailbox 13     */
+#define	TRR14		0x4000	/* Deny But Don't Lock Access To Mailbox 14     */
+#define	TRR15		0x8000	/* Deny But Don't Lock Access To Mailbox 15     */
+
+/* CAN_TRR2 Masks														*/
+#define	TRR16		0x0001	/* Deny But Don't Lock Access To Mailbox 16     */
+#define	TRR17		0x0002	/* Deny But Don't Lock Access To Mailbox 17     */
+#define	TRR18		0x0004	/* Deny But Don't Lock Access To Mailbox 18     */
+#define	TRR19		0x0008	/* Deny But Don't Lock Access To Mailbox 19     */
+#define	TRR20		0x0010	/* Deny But Don't Lock Access To Mailbox 20     */
+#define	TRR21		0x0020	/* Deny But Don't Lock Access To Mailbox 21     */
+#define	TRR22		0x0040	/* Deny But Don't Lock Access To Mailbox 22     */
+#define	TRR23		0x0080	/* Deny But Don't Lock Access To Mailbox 23     */
+#define	TRR24		0x0100	/* Deny But Don't Lock Access To Mailbox 24     */
+#define	TRR25		0x0200	/* Deny But Don't Lock Access To Mailbox 25     */
+#define	TRR26		0x0400	/* Deny But Don't Lock Access To Mailbox 26     */
+#define	TRR27		0x0800	/* Deny But Don't Lock Access To Mailbox 27     */
+#define	TRR28		0x1000	/* Deny But Don't Lock Access To Mailbox 28     */
+#define	TRR29		0x2000	/* Deny But Don't Lock Access To Mailbox 29     */
+#define	TRR30		0x4000	/* Deny But Don't Lock Access To Mailbox 30     */
+#define	TRR31		0x8000	/* Deny But Don't Lock Access To Mailbox 31     */
+
+/* CAN_TRS1 Masks													*/
+#define	TRS0		0x0001	/* Remote Frame Request For Mailbox 0   */
+#define	TRS1		0x0002	/* Remote Frame Request For Mailbox 1   */
+#define	TRS2		0x0004	/* Remote Frame Request For Mailbox 2   */
+#define	TRS3		0x0008	/* Remote Frame Request For Mailbox 3   */
+#define	TRS4		0x0010	/* Remote Frame Request For Mailbox 4   */
+#define	TRS5		0x0020	/* Remote Frame Request For Mailbox 5   */
+#define	TRS6		0x0040	/* Remote Frame Request For Mailbox 6   */
+#define	TRS7		0x0080	/* Remote Frame Request For Mailbox 7   */
+#define	TRS8		0x0100	/* Remote Frame Request For Mailbox 8   */
+#define	TRS9		0x0200	/* Remote Frame Request For Mailbox 9   */
+#define	TRS10		0x0400	/* Remote Frame Request For Mailbox 10  */
+#define	TRS11		0x0800	/* Remote Frame Request For Mailbox 11  */
+#define	TRS12		0x1000	/* Remote Frame Request For Mailbox 12  */
+#define	TRS13		0x2000	/* Remote Frame Request For Mailbox 13  */
+#define	TRS14		0x4000	/* Remote Frame Request For Mailbox 14  */
+#define	TRS15		0x8000	/* Remote Frame Request For Mailbox 15  */
+
+/* CAN_TRS2 Masks													*/
+#define	TRS16		0x0001	/* Remote Frame Request For Mailbox 16  */
+#define	TRS17		0x0002	/* Remote Frame Request For Mailbox 17  */
+#define	TRS18		0x0004	/* Remote Frame Request For Mailbox 18  */
+#define	TRS19		0x0008	/* Remote Frame Request For Mailbox 19  */
+#define	TRS20		0x0010	/* Remote Frame Request For Mailbox 20  */
+#define	TRS21		0x0020	/* Remote Frame Request For Mailbox 21  */
+#define	TRS22		0x0040	/* Remote Frame Request For Mailbox 22  */
+#define	TRS23		0x0080	/* Remote Frame Request For Mailbox 23  */
+#define	TRS24		0x0100	/* Remote Frame Request For Mailbox 24  */
+#define	TRS25		0x0200	/* Remote Frame Request For Mailbox 25  */
+#define	TRS26		0x0400	/* Remote Frame Request For Mailbox 26  */
+#define	TRS27		0x0800	/* Remote Frame Request For Mailbox 27  */
+#define	TRS28		0x1000	/* Remote Frame Request For Mailbox 28  */
+#define	TRS29		0x2000	/* Remote Frame Request For Mailbox 29  */
+#define	TRS30		0x4000	/* Remote Frame Request For Mailbox 30  */
+#define	TRS31		0x8000	/* Remote Frame Request For Mailbox 31  */
+
+/* CAN_AA1 Masks												*/
+#define	AA0			0x0001	/* Aborted Message In Mailbox 0         */
+#define	AA1			0x0002	/* Aborted Message In Mailbox 1         */
+#define	AA2			0x0004	/* Aborted Message In Mailbox 2         */
+#define	AA3			0x0008	/* Aborted Message In Mailbox 3         */
+#define	AA4			0x0010	/* Aborted Message In Mailbox 4         */
+#define	AA5			0x0020	/* Aborted Message In Mailbox 5         */
+#define	AA6			0x0040	/* Aborted Message In Mailbox 6         */
+#define	AA7			0x0080	/* Aborted Message In Mailbox 7         */
+#define	AA8			0x0100	/* Aborted Message In Mailbox 8         */
+#define	AA9			0x0200	/* Aborted Message In Mailbox 9         */
+#define	AA10		0x0400	/* Aborted Message In Mailbox 10        */
+#define	AA11		0x0800	/* Aborted Message In Mailbox 11        */
+#define	AA12		0x1000	/* Aborted Message In Mailbox 12        */
+#define	AA13		0x2000	/* Aborted Message In Mailbox 13        */
+#define	AA14		0x4000	/* Aborted Message In Mailbox 14        */
+#define	AA15		0x8000	/* Aborted Message In Mailbox 15        */
+
+/* CAN_AA2 Masks												*/
+#define	AA16		0x0001	/* Aborted Message In Mailbox 16        */
+#define	AA17		0x0002	/* Aborted Message In Mailbox 17        */
+#define	AA18		0x0004	/* Aborted Message In Mailbox 18        */
+#define	AA19		0x0008	/* Aborted Message In Mailbox 19        */
+#define	AA20		0x0010	/* Aborted Message In Mailbox 20        */
+#define	AA21		0x0020	/* Aborted Message In Mailbox 21        */
+#define	AA22		0x0040	/* Aborted Message In Mailbox 22        */
+#define	AA23		0x0080	/* Aborted Message In Mailbox 23        */
+#define	AA24		0x0100	/* Aborted Message In Mailbox 24        */
+#define	AA25		0x0200	/* Aborted Message In Mailbox 25        */
+#define	AA26		0x0400	/* Aborted Message In Mailbox 26        */
+#define	AA27		0x0800	/* Aborted Message In Mailbox 27        */
+#define	AA28		0x1000	/* Aborted Message In Mailbox 28        */
+#define	AA29		0x2000	/* Aborted Message In Mailbox 29        */
+#define	AA30		0x4000	/* Aborted Message In Mailbox 30        */
+#define	AA31		0x8000	/* Aborted Message In Mailbox 31        */
+
+/* CAN_TA1 Masks													*/
+#define	TA0			0x0001	/* Transmit Successful From Mailbox 0   */
+#define	TA1			0x0002	/* Transmit Successful From Mailbox 1   */
+#define	TA2			0x0004	/* Transmit Successful From Mailbox 2   */
+#define	TA3			0x0008	/* Transmit Successful From Mailbox 3   */
+#define	TA4			0x0010	/* Transmit Successful From Mailbox 4   */
+#define	TA5			0x0020	/* Transmit Successful From Mailbox 5   */
+#define	TA6			0x0040	/* Transmit Successful From Mailbox 6   */
+#define	TA7			0x0080	/* Transmit Successful From Mailbox 7   */
+#define	TA8			0x0100	/* Transmit Successful From Mailbox 8   */
+#define	TA9			0x0200	/* Transmit Successful From Mailbox 9   */
+#define	TA10		0x0400	/* Transmit Successful From Mailbox 10  */
+#define	TA11		0x0800	/* Transmit Successful From Mailbox 11  */
+#define	TA12		0x1000	/* Transmit Successful From Mailbox 12  */
+#define	TA13		0x2000	/* Transmit Successful From Mailbox 13  */
+#define	TA14		0x4000	/* Transmit Successful From Mailbox 14  */
+#define	TA15		0x8000	/* Transmit Successful From Mailbox 15  */
+
+/* CAN_TA2 Masks													*/
+#define	TA16		0x0001	/* Transmit Successful From Mailbox 16  */
+#define	TA17		0x0002	/* Transmit Successful From Mailbox 17  */
+#define	TA18		0x0004	/* Transmit Successful From Mailbox 18  */
+#define	TA19		0x0008	/* Transmit Successful From Mailbox 19  */
+#define	TA20		0x0010	/* Transmit Successful From Mailbox 20  */
+#define	TA21		0x0020	/* Transmit Successful From Mailbox 21  */
+#define	TA22		0x0040	/* Transmit Successful From Mailbox 22  */
+#define	TA23		0x0080	/* Transmit Successful From Mailbox 23  */
+#define	TA24		0x0100	/* Transmit Successful From Mailbox 24  */
+#define	TA25		0x0200	/* Transmit Successful From Mailbox 25  */
+#define	TA26		0x0400	/* Transmit Successful From Mailbox 26  */
+#define	TA27		0x0800	/* Transmit Successful From Mailbox 27  */
+#define	TA28		0x1000	/* Transmit Successful From Mailbox 28  */
+#define	TA29		0x2000	/* Transmit Successful From Mailbox 29  */
+#define	TA30		0x4000	/* Transmit Successful From Mailbox 30  */
+#define	TA31		0x8000	/* Transmit Successful From Mailbox 31  */
+
+/* CAN_MBTD Masks												*/
+#define TDPTR		0x001F	/* Mailbox To Temporarily Disable       */
+#define	TDA			0x0040	/* Temporary Disable Acknowledge        */
+#define	TDR			0x0080	/* Temporary Disable Request            */
+
+/* CAN_RFH1 Masks																		*/
+#define	RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0         */
+#define	RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1         */
+#define	RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2         */
+#define	RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3         */
+#define	RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4         */
+#define	RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5         */
+#define	RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6         */
+#define	RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7         */
+#define	RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8         */
+#define	RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9         */
+#define	RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10        */
+#define	RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11        */
+#define	RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12        */
+#define	RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13        */
+#define	RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14        */
+#define	RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15        */
+
+/* CAN_RFH2 Masks																		*/
+#define	RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16        */
+#define	RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17        */
+#define	RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18        */
+#define	RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19        */
+#define	RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20        */
+#define	RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21        */
+#define	RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22        */
+#define	RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23        */
+#define	RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24        */
+#define	RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25        */
+#define	RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26        */
+#define	RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27        */
+#define	RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28        */
+#define	RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29        */
+#define	RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30        */
+#define	RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31        */
+
+/* CAN_MBTIF1 Masks													*/
+#define	MBTIF0		0x0001	/* TX Interrupt Active In Mailbox 0             */
+#define	MBTIF1		0x0002	/* TX Interrupt Active In Mailbox 1             */
+#define	MBTIF2		0x0004	/* TX Interrupt Active In Mailbox 2             */
+#define	MBTIF3		0x0008	/* TX Interrupt Active In Mailbox 3             */
+#define	MBTIF4		0x0010	/* TX Interrupt Active In Mailbox 4             */
+#define	MBTIF5		0x0020	/* TX Interrupt Active In Mailbox 5             */
+#define	MBTIF6		0x0040	/* TX Interrupt Active In Mailbox 6             */
+#define	MBTIF7		0x0080	/* TX Interrupt Active In Mailbox 7             */
+#define	MBTIF8		0x0100	/* TX Interrupt Active In Mailbox 8             */
+#define	MBTIF9		0x0200	/* TX Interrupt Active In Mailbox 9             */
+#define	MBTIF10		0x0400	/* TX Interrupt Active In Mailbox 10    */
+#define	MBTIF11		0x0800	/* TX Interrupt Active In Mailbox 11    */
+#define	MBTIF12		0x1000	/* TX Interrupt Active In Mailbox 12    */
+#define	MBTIF13		0x2000	/* TX Interrupt Active In Mailbox 13    */
+#define	MBTIF14		0x4000	/* TX Interrupt Active In Mailbox 14    */
+#define	MBTIF15		0x8000	/* TX Interrupt Active In Mailbox 15    */
+
+/* CAN_MBTIF2 Masks													*/
+#define	MBTIF16		0x0001	/* TX Interrupt Active In Mailbox 16    */
+#define	MBTIF17		0x0002	/* TX Interrupt Active In Mailbox 17    */
+#define	MBTIF18		0x0004	/* TX Interrupt Active In Mailbox 18    */
+#define	MBTIF19		0x0008	/* TX Interrupt Active In Mailbox 19    */
+#define	MBTIF20		0x0010	/* TX Interrupt Active In Mailbox 20    */
+#define	MBTIF21		0x0020	/* TX Interrupt Active In Mailbox 21    */
+#define	MBTIF22		0x0040	/* TX Interrupt Active In Mailbox 22    */
+#define	MBTIF23		0x0080	/* TX Interrupt Active In Mailbox 23    */
+#define	MBTIF24		0x0100	/* TX Interrupt Active In Mailbox 24    */
+#define	MBTIF25		0x0200	/* TX Interrupt Active In Mailbox 25    */
+#define	MBTIF26		0x0400	/* TX Interrupt Active In Mailbox 26    */
+#define	MBTIF27		0x0800	/* TX Interrupt Active In Mailbox 27    */
+#define	MBTIF28		0x1000	/* TX Interrupt Active In Mailbox 28    */
+#define	MBTIF29		0x2000	/* TX Interrupt Active In Mailbox 29    */
+#define	MBTIF30		0x4000	/* TX Interrupt Active In Mailbox 30    */
+#define	MBTIF31		0x8000	/* TX Interrupt Active In Mailbox 31    */
+
+/* CAN_MBRIF1 Masks													*/
+#define	MBRIF0		0x0001	/* RX Interrupt Active In Mailbox 0             */
+#define	MBRIF1		0x0002	/* RX Interrupt Active In Mailbox 1             */
+#define	MBRIF2		0x0004	/* RX Interrupt Active In Mailbox 2             */
+#define	MBRIF3		0x0008	/* RX Interrupt Active In Mailbox 3             */
+#define	MBRIF4		0x0010	/* RX Interrupt Active In Mailbox 4             */
+#define	MBRIF5		0x0020	/* RX Interrupt Active In Mailbox 5             */
+#define	MBRIF6		0x0040	/* RX Interrupt Active In Mailbox 6             */
+#define	MBRIF7		0x0080	/* RX Interrupt Active In Mailbox 7             */
+#define	MBRIF8		0x0100	/* RX Interrupt Active In Mailbox 8             */
+#define	MBRIF9		0x0200	/* RX Interrupt Active In Mailbox 9             */
+#define	MBRIF10		0x0400	/* RX Interrupt Active In Mailbox 10    */
+#define	MBRIF11		0x0800	/* RX Interrupt Active In Mailbox 11    */
+#define	MBRIF12		0x1000	/* RX Interrupt Active In Mailbox 12    */
+#define	MBRIF13		0x2000	/* RX Interrupt Active In Mailbox 13    */
+#define	MBRIF14		0x4000	/* RX Interrupt Active In Mailbox 14    */
+#define	MBRIF15		0x8000	/* RX Interrupt Active In Mailbox 15    */
+
+/* CAN_MBRIF2 Masks													*/
+#define	MBRIF16		0x0001	/* RX Interrupt Active In Mailbox 16    */
+#define	MBRIF17		0x0002	/* RX Interrupt Active In Mailbox 17    */
+#define	MBRIF18		0x0004	/* RX Interrupt Active In Mailbox 18    */
+#define	MBRIF19		0x0008	/* RX Interrupt Active In Mailbox 19    */
+#define	MBRIF20		0x0010	/* RX Interrupt Active In Mailbox 20    */
+#define	MBRIF21		0x0020	/* RX Interrupt Active In Mailbox 21    */
+#define	MBRIF22		0x0040	/* RX Interrupt Active In Mailbox 22    */
+#define	MBRIF23		0x0080	/* RX Interrupt Active In Mailbox 23    */
+#define	MBRIF24		0x0100	/* RX Interrupt Active In Mailbox 24    */
+#define	MBRIF25		0x0200	/* RX Interrupt Active In Mailbox 25    */
+#define	MBRIF26		0x0400	/* RX Interrupt Active In Mailbox 26    */
+#define	MBRIF27		0x0800	/* RX Interrupt Active In Mailbox 27    */
+#define	MBRIF28		0x1000	/* RX Interrupt Active In Mailbox 28    */
+#define	MBRIF29		0x2000	/* RX Interrupt Active In Mailbox 29    */
+#define	MBRIF30		0x4000	/* RX Interrupt Active In Mailbox 30    */
+#define	MBRIF31		0x8000	/* RX Interrupt Active In Mailbox 31    */
+
+/* CAN_MBIM1 Masks												*/
+#define	MBIM0		0x0001	/* Enable Interrupt For Mailbox 0       */
+#define	MBIM1		0x0002	/* Enable Interrupt For Mailbox 1       */
+#define	MBIM2		0x0004	/* Enable Interrupt For Mailbox 2       */
+#define	MBIM3		0x0008	/* Enable Interrupt For Mailbox 3       */
+#define	MBIM4		0x0010	/* Enable Interrupt For Mailbox 4       */
+#define	MBIM5		0x0020	/* Enable Interrupt For Mailbox 5       */
+#define	MBIM6		0x0040	/* Enable Interrupt For Mailbox 6       */
+#define	MBIM7		0x0080	/* Enable Interrupt For Mailbox 7       */
+#define	MBIM8		0x0100	/* Enable Interrupt For Mailbox 8       */
+#define	MBIM9		0x0200	/* Enable Interrupt For Mailbox 9       */
+#define	MBIM10		0x0400	/* Enable Interrupt For Mailbox 10      */
+#define	MBIM11		0x0800	/* Enable Interrupt For Mailbox 11      */
+#define	MBIM12		0x1000	/* Enable Interrupt For Mailbox 12      */
+#define	MBIM13		0x2000	/* Enable Interrupt For Mailbox 13      */
+#define	MBIM14		0x4000	/* Enable Interrupt For Mailbox 14      */
+#define	MBIM15		0x8000	/* Enable Interrupt For Mailbox 15      */
+
+/* CAN_MBIM2 Masks												*/
+#define	MBIM16		0x0001	/* Enable Interrupt For Mailbox 16      */
+#define	MBIM17		0x0002	/* Enable Interrupt For Mailbox 17      */
+#define	MBIM18		0x0004	/* Enable Interrupt For Mailbox 18      */
+#define	MBIM19		0x0008	/* Enable Interrupt For Mailbox 19      */
+#define	MBIM20		0x0010	/* Enable Interrupt For Mailbox 20      */
+#define	MBIM21		0x0020	/* Enable Interrupt For Mailbox 21      */
+#define	MBIM22		0x0040	/* Enable Interrupt For Mailbox 22      */
+#define	MBIM23		0x0080	/* Enable Interrupt For Mailbox 23      */
+#define	MBIM24		0x0100	/* Enable Interrupt For Mailbox 24      */
+#define	MBIM25		0x0200	/* Enable Interrupt For Mailbox 25      */
+#define	MBIM26		0x0400	/* Enable Interrupt For Mailbox 26      */
+#define	MBIM27		0x0800	/* Enable Interrupt For Mailbox 27      */
+#define	MBIM28		0x1000	/* Enable Interrupt For Mailbox 28      */
+#define	MBIM29		0x2000	/* Enable Interrupt For Mailbox 29      */
+#define	MBIM30		0x4000	/* Enable Interrupt For Mailbox 30      */
+#define	MBIM31		0x8000	/* Enable Interrupt For Mailbox 31      */
+
+/* CAN_GIM Masks																*/
+#define	EWTIM		0x0001	/* Enable TX Error Count Interrupt                                      */
+#define	EWRIM		0x0002	/* Enable RX Error Count Interrupt                                      */
+#define	EPIM		0x0004	/* Enable Error-Passive Mode Interrupt                          */
+#define	BOIM		0x0008	/* Enable Bus Off Interrupt                                                     */
+#define	WUIM		0x0010	/* Enable Wake-Up Interrupt                                                     */
+#define	UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt     */
+#define	AAIM		0x0040	/* Enable Abort Acknowledge Interrupt                           */
+#define	RMLIM		0x0080	/* Enable RX Message Lost Interrupt                                     */
+#define	UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt          */
+#define	EXTIM		0x0200	/* Enable External Trigger Output Interrupt                     */
+#define	ADIM		0x0400	/* Enable Access Denied Interrupt                                       */
+
+/* CAN_GIS Masks															*/
+#define	EWTIS		0x0001	/* TX Error Count IRQ Status                                    */
+#define	EWRIS		0x0002	/* RX Error Count IRQ Status                                    */
+#define	EPIS		0x0004	/* Error-Passive Mode IRQ Status                                */
+#define	BOIS		0x0008	/* Bus Off IRQ Status                                                   */
+#define	WUIS		0x0010	/* Wake-Up IRQ Status                                                   */
+#define	UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status   */
+#define	AAIS		0x0040	/* Abort Acknowledge IRQ Status                                 */
+#define	RMLIS		0x0080	/* RX Message Lost IRQ Status                                   */
+#define	UCEIS		0x0100	/* Universal Counter Overflow IRQ Status                */
+#define	EXTIS		0x0200	/* External Trigger Output IRQ Status                   */
+#define	ADIS		0x0400	/* Access Denied IRQ Status                                             */
+
+/* CAN_GIF Masks															*/
+#define	EWTIF		0x0001	/* TX Error Count IRQ Flag                                              */
+#define	EWRIF		0x0002	/* RX Error Count IRQ Flag                                              */
+#define	EPIF		0x0004	/* Error-Passive Mode IRQ Flag                                  */
+#define	BOIF		0x0008	/* Bus Off IRQ Flag                                                             */
+#define	WUIF		0x0010	/* Wake-Up IRQ Flag                                                             */
+#define	UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag             */
+#define	AAIF		0x0040	/* Abort Acknowledge IRQ Flag                                   */
+#define	RMLIF		0x0080	/* RX Message Lost IRQ Flag                                             */
+#define	UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag                  */
+#define	EXTIF		0x0200	/* External Trigger Output IRQ Flag                             */
+#define	ADIF		0x0400	/* Access Denied IRQ Flag                                               */
+
+/* CAN_UCCNF Masks															*/
+#define	UCCNF		0x000F	/* Universal Counter Mode                                               */
+#define UC_STAMP	0x0001	/*              Timestamp Mode                                                  */
+#define UC_WDOG		0x0002	/*              Watchdog Mode                                                   */
+#define UC_AUTOTX	0x0003	/*              Auto-Transmit Mode                                              */
+#define UC_ERROR	0x0006	/*              CAN Error Frame Count                                   */
+#define UC_OVER		0x0007	/*              CAN Overload Frame Count                                */
+#define UC_LOST		0x0008	/*              Arbitration Lost During TX Count                */
+#define UC_AA		0x0009	/*              TX Abort Count                                                  */
+#define UC_TA		0x000A	/*              TX Successful Count                                             */
+#define UC_REJECT	0x000B	/*              RX Message Rejected Count                               */
+#define UC_RML		0x000C	/*              RX Message Lost Count                                   */
+#define UC_RX		0x000D	/*              Total Successful RX Messages Count              */
+#define UC_RMP		0x000E	/*              Successful RX W/Matching ID Count               */
+#define UC_ALL		0x000F	/*              Correct Message On CAN Bus Line Count   */
+#define	UCRC		0x0020	/* Universal Counter Reload/Clear                               */
+#define	UCCT		0x0040	/* Universal Counter CAN Trigger                                */
+#define	UCE			0x0080	/* Universal Counter Enable                                             */
+
+/* CAN_ESR Masks										*/
+#define	ACKE		0x0004	/* Acknowledge Error            */
+#define	SER			0x0008	/* Stuff Error                          */
+#define	CRCE		0x0010	/* CRC Error                            */
+#define	SA0			0x0020	/* Stuck At Dominant Error      */
+#define	BEF			0x0040	/* Bit Error Flag                       */
+#define	FER			0x0080	/* Form Error Flag                      */
+
+/* CAN_EWR Masks												*/
+#define	EWLREC		0x00FF	/* RX Error Count Limit (For EWRIS)     */
+#define	EWLTEC		0xFF00	/* TX Error Count Limit (For EWTIS)     */
+
+/*  *******************  PIN CONTROL REGISTER MASKS  ************************/
+/* PORT_MUX Masks															*/
+#define	PJSE			0x0001	/* Port J SPI/SPORT Enable                      */
+#define	PJSE_SPORT		0x0000	/*              Enable TFS0/DT0PRI                      */
+#define	PJSE_SPI		0x0001	/*              Enable SPI_SSEL3:2                      */
+
+#define	PJCE(x)			(((x)&0x3)<<1)	/* Port J CAN/SPI/SPORT Enable          */
+#define	PJCE_SPORT		0x0000	/*              Enable DR0SEC/DT0SEC            */
+#define	PJCE_CAN		0x0002	/*              Enable CAN RX/TX                        */
+#define	PJCE_SPI		0x0004	/*              Enable SPI_SSEL7                        */
+
+#define	PFDE			0x0008	/* Port F DMA Request Enable            */
+#define	PFDE_UART		0x0000	/*              Enable UART0 RX/TX                      */
+#define	PFDE_DMA		0x0008	/*              Enable DMAR1:0                          */
+
+#define	PFTE			0x0010	/* Port F Timer Enable                          */
+#define	PFTE_UART		0x0000	/*              Enable UART1 RX/TX                      */
+#define	PFTE_TIMER		0x0010	/*              Enable TMR7:6                           */
+
+#define	PFS6E			0x0020	/* Port F SPI SSEL 6 Enable                     */
+#define	PFS6E_TIMER		0x0000	/*              Enable TMR5                                     */
+#define	PFS6E_SPI		0x0020	/*              Enable SPI_SSEL6                        */
+
+#define	PFS5E			0x0040	/* Port F SPI SSEL 5 Enable                     */
+#define	PFS5E_TIMER		0x0000	/*              Enable TMR4                                     */
+#define	PFS5E_SPI		0x0040	/*              Enable SPI_SSEL5                        */
+
+#define	PFS4E			0x0080	/* Port F SPI SSEL 4 Enable                     */
+#define	PFS4E_TIMER		0x0000	/*              Enable TMR3                                     */
+#define	PFS4E_SPI		0x0080	/*              Enable SPI_SSEL4                        */
+
+#define	PFFE			0x0100	/* Port F PPI Frame Sync Enable         */
+#define	PFFE_TIMER		0x0000	/*              Enable TMR2                                     */
+#define	PFFE_PPI		0x0100	/*              Enable PPI FS3                          */
+
+#define	PGSE			0x0200	/* Port G SPORT1 Secondary Enable       */
+#define	PGSE_PPI		0x0000	/*              Enable PPI D9:8                         */
+#define	PGSE_SPORT		0x0200	/*              Enable DR1SEC/DT1SEC            */
+
+#define	PGRE			0x0400	/* Port G SPORT1 Receive Enable         */
+#define	PGRE_PPI		0x0000	/*              Enable PPI D12:10                       */
+#define	PGRE_SPORT		0x0400	/*              Enable DR1PRI/RFS1/RSCLK1       */
+
+#define	PGTE			0x0800	/* Port G SPORT1 Transmit Enable        */
+#define	PGTE_PPI		0x0000	/*              Enable PPI D15:13                       */
+#define	PGTE_SPORT		0x0800	/*              Enable DT1PRI/TFS1/TSCLK1       */
+
+/*  ******************  HANDSHAKE DMA (HDMA) MASKS  *********************/
+/* HDMAx_CTL Masks														*/
+#define	HMDMAEN		0x0001	/* Enable Handshake DMA 0/1                                     */
+#define	REP			0x0002	/* HDMA Request Polarity                                        */
+#define	UTE			0x0004	/* Urgency Threshold Enable                                     */
+#define	OIE			0x0010	/* Overflow Interrupt Enable                            */
+#define	BDIE		0x0020	/* Block Done Interrupt Enable                          */
+#define	MBDI		0x0040	/* Mask Block Done IRQ If Pending ECNT          */
+#define	DRQ			0x0300	/* HDMA Request Type                                            */
+#define	DRQ_NONE	0x0000	/*              No Request                                                      */
+#define	DRQ_SINGLE	0x0100	/*              Channels Request Single                         */
+#define	DRQ_MULTI	0x0200	/*              Channels Request Multi (Default)        */
+#define	DRQ_URGENT	0x0300	/*              Channels Request Multi Urgent           */
+#define	RBC			0x1000	/* Reload BCNT With IBCNT                                       */
+#define	PS			0x2000	/* HDMA Pin Status                                                      */
+#define	OI			0x4000	/* Overflow Interrupt Generated                         */
+#define	BDI			0x8000	/* Block Done Interrupt Generated                       */
+
+/* entry addresses of the user-callable Boot ROM functions */
+
+#define _BOOTROM_RESET 0xEF000000 
+#define _BOOTROM_FINAL_INIT 0xEF000002 
+#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A 
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C 
+#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
+#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
+#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define	PGDE_UART   PFDE_UART
+#define	PGDE_DMA    PFDE_DMA
+#define	CKELOW		SCKELOW
+#endif				/* _DEF_BF534_H */
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h
new file mode 100644
index 00000000000..3d6c83e31b1
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h
@@ -0,0 +1,405 @@
+/*
+ * file:         include/asm-blackfin/mach-bf537/defbf537.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _DEF_BF537_H
+#define _DEF_BF537_H
+
+/* Include all Core registers and bit definitions*/
+#include <asm/cdef_LPBlackfin.h>
+
+/* Include all MMR and bit defines common to BF534 */
+#include "defBF534.h"
+
+/************************************************************************************
+** Define EMAC Section Unique to BF536/BF537
+*************************************************************************************/
+
+/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF)										*/
+#define	EMAC_OPMODE			0xFFC03000	/* Operating Mode Register                                                              */
+#define EMAC_ADDRLO			0xFFC03004	/* Address Low (32 LSBs) Register                                               */
+#define EMAC_ADDRHI			0xFFC03008	/* Address High (16 MSBs) Register                                              */
+#define EMAC_HASHLO			0xFFC0300C	/* Multicast Hash Table Low (Bins 31-0) Register                */
+#define EMAC_HASHHI			0xFFC03010	/* Multicast Hash Table High (Bins 63-32) Register              */
+#define EMAC_STAADD			0xFFC03014	/* Station Management Address Register                                  */
+#define EMAC_STADAT			0xFFC03018	/* Station Management Data Register                                     */
+#define EMAC_FLC			0xFFC0301C	/* Flow Control Register                                                                */
+#define EMAC_VLAN1			0xFFC03020	/* VLAN1 Tag Register                                                                   */
+#define EMAC_VLAN2			0xFFC03024	/* VLAN2 Tag Register                                                                   */
+#define EMAC_WKUP_CTL		0xFFC0302C	/* Wake-Up Control/Status Register                                              */
+#define EMAC_WKUP_FFMSK0	0xFFC03030	/* Wake-Up Frame Filter 0 Byte Mask Register                    */
+#define EMAC_WKUP_FFMSK1	0xFFC03034	/* Wake-Up Frame Filter 1 Byte Mask Register                    */
+#define EMAC_WKUP_FFMSK2	0xFFC03038	/* Wake-Up Frame Filter 2 Byte Mask Register                    */
+#define EMAC_WKUP_FFMSK3	0xFFC0303C	/* Wake-Up Frame Filter 3 Byte Mask Register                    */
+#define EMAC_WKUP_FFCMD		0xFFC03040	/* Wake-Up Frame Filter Commands Register                               */
+#define EMAC_WKUP_FFOFF		0xFFC03044	/* Wake-Up Frame Filter Offsets Register                                */
+#define EMAC_WKUP_FFCRC0	0xFFC03048	/* Wake-Up Frame Filter 0,1 CRC-16 Register                             */
+#define EMAC_WKUP_FFCRC1	0xFFC0304C	/* Wake-Up Frame Filter 2,3 CRC-16 Register                             */
+
+#define	EMAC_SYSCTL			0xFFC03060	/* EMAC System Control Register                                                 */
+#define EMAC_SYSTAT			0xFFC03064	/* EMAC System Status Register                                                  */
+#define EMAC_RX_STAT		0xFFC03068	/* RX Current Frame Status Register                                             */
+#define EMAC_RX_STKY		0xFFC0306C	/* RX Sticky Frame Status Register                                              */
+#define EMAC_RX_IRQE		0xFFC03070	/* RX Frame Status Interrupt Enables Register                   */
+#define EMAC_TX_STAT		0xFFC03074	/* TX Current Frame Status Register                                             */
+#define EMAC_TX_STKY		0xFFC03078	/* TX Sticky Frame Status Register                                              */
+#define EMAC_TX_IRQE		0xFFC0307C	/* TX Frame Status Interrupt Enables Register                   */
+
+#define EMAC_MMC_CTL		0xFFC03080	/* MMC Counter Control Register                                                 */
+#define EMAC_MMC_RIRQS		0xFFC03084	/* MMC RX Interrupt Status Register                                             */
+#define EMAC_MMC_RIRQE		0xFFC03088	/* MMC RX Interrupt Enables Register                                    */
+#define EMAC_MMC_TIRQS		0xFFC0308C	/* MMC TX Interrupt Status Register                                             */
+#define EMAC_MMC_TIRQE		0xFFC03090	/* MMC TX Interrupt Enables Register                                    */
+
+#define EMAC_RXC_OK			0xFFC03100	/* RX Frame Successful Count                                                    */
+#define EMAC_RXC_FCS		0xFFC03104	/* RX Frame FCS Failure Count                                                   */
+#define EMAC_RXC_ALIGN		0xFFC03108	/* RX Alignment Error Count                                                             */
+#define EMAC_RXC_OCTET		0xFFC0310C	/* RX Octets Successfully Received Count                                */
+#define EMAC_RXC_DMAOVF		0xFFC03110	/* Internal MAC Sublayer Error RX Frame Count                   */
+#define EMAC_RXC_UNICST		0xFFC03114	/* Unicast RX Frame Count                                                               */
+#define EMAC_RXC_MULTI		0xFFC03118	/* Multicast RX Frame Count                                                             */
+#define EMAC_RXC_BROAD		0xFFC0311C	/* Broadcast RX Frame Count                                                             */
+#define EMAC_RXC_LNERRI		0xFFC03120	/* RX Frame In Range Error Count                                                */
+#define EMAC_RXC_LNERRO		0xFFC03124	/* RX Frame Out Of Range Error Count                                    */
+#define EMAC_RXC_LONG		0xFFC03128	/* RX Frame Too Long Count                                                              */
+#define EMAC_RXC_MACCTL		0xFFC0312C	/* MAC Control RX Frame Count                                                   */
+#define EMAC_RXC_OPCODE		0xFFC03130	/* Unsupported Op-Code RX Frame Count                                   */
+#define EMAC_RXC_PAUSE		0xFFC03134	/* MAC Control Pause RX Frame Count                                             */
+#define EMAC_RXC_ALLFRM		0xFFC03138	/* Overall RX Frame Count                                                               */
+#define EMAC_RXC_ALLOCT		0xFFC0313C	/* Overall RX Octet Count                                                               */
+#define EMAC_RXC_TYPED		0xFFC03140	/* Type/Length Consistent RX Frame Count                                */
+#define EMAC_RXC_SHORT		0xFFC03144	/* RX Frame Fragment Count - Byte Count x < 64                  */
+#define EMAC_RXC_EQ64		0xFFC03148	/* Good RX Frame Count - Byte Count x = 64                              */
+#define EMAC_RXC_LT128		0xFFC0314C	/* Good RX Frame Count - Byte Count  64 <= x < 128              */
+#define EMAC_RXC_LT256		0xFFC03150	/* Good RX Frame Count - Byte Count 128 <= x < 256              */
+#define EMAC_RXC_LT512		0xFFC03154	/* Good RX Frame Count - Byte Count 256 <= x < 512              */
+#define EMAC_RXC_LT1024		0xFFC03158	/* Good RX Frame Count - Byte Count 512 <= x < 1024             */
+#define EMAC_RXC_GE1024		0xFFC0315C	/* Good RX Frame Count - Byte Count x >= 1024                   */
+
+#define EMAC_TXC_OK			0xFFC03180	/* TX Frame Successful Count                                                    */
+#define EMAC_TXC_1COL		0xFFC03184	/* TX Frames Successful After Single Collision Count    */
+#define EMAC_TXC_GT1COL		0xFFC03188	/* TX Frames Successful After Multiple Collisions Count */
+#define EMAC_TXC_OCTET		0xFFC0318C	/* TX Octets Successfully Received Count                                */
+#define EMAC_TXC_DEFER		0xFFC03190	/* TX Frame Delayed Due To Busy Count                                   */
+#define EMAC_TXC_LATECL		0xFFC03194	/* Late TX Collisions Count                                                             */
+#define EMAC_TXC_XS_COL		0xFFC03198	/* TX Frame Failed Due To Excessive Collisions Count    */
+#define EMAC_TXC_DMAUND		0xFFC0319C	/* Internal MAC Sublayer Error TX Frame Count                   */
+#define EMAC_TXC_CRSERR		0xFFC031A0	/* Carrier Sense Deasserted During TX Frame Count               */
+#define EMAC_TXC_UNICST		0xFFC031A4	/* Unicast TX Frame Count                                                               */
+#define EMAC_TXC_MULTI		0xFFC031A8	/* Multicast TX Frame Count                                                             */
+#define EMAC_TXC_BROAD		0xFFC031AC	/* Broadcast TX Frame Count                                                             */
+#define EMAC_TXC_XS_DFR		0xFFC031B0	/* TX Frames With Excessive Deferral Count                              */
+#define EMAC_TXC_MACCTL		0xFFC031B4	/* MAC Control TX Frame Count                                                   */
+#define EMAC_TXC_ALLFRM		0xFFC031B8	/* Overall TX Frame Count                                                               */
+#define EMAC_TXC_ALLOCT		0xFFC031BC	/* Overall TX Octet Count                                                               */
+#define EMAC_TXC_EQ64		0xFFC031C0	/* Good TX Frame Count - Byte Count x = 64                              */
+#define EMAC_TXC_LT128		0xFFC031C4	/* Good TX Frame Count - Byte Count  64 <= x < 128              */
+#define EMAC_TXC_LT256		0xFFC031C8	/* Good TX Frame Count - Byte Count 128 <= x < 256              */
+#define EMAC_TXC_LT512		0xFFC031CC	/* Good TX Frame Count - Byte Count 256 <= x < 512              */
+#define EMAC_TXC_LT1024		0xFFC031D0	/* Good TX Frame Count - Byte Count 512 <= x < 1024             */
+#define EMAC_TXC_GE1024		0xFFC031D4	/* Good TX Frame Count - Byte Count x >= 1024                   */
+#define EMAC_TXC_ABORT		0xFFC031D8	/* Total TX Frames Aborted Count                                                */
+
+/* Listing for IEEE-Supported Count Registers																	*/
+#define FramesReceivedOK				EMAC_RXC_OK	/* RX Frame Successful Count                                                    */
+#define FrameCheckSequenceErrors		EMAC_RXC_FCS	/* RX Frame FCS Failure Count                                                   */
+#define AlignmentErrors					EMAC_RXC_ALIGN	/* RX Alignment Error Count                                                             */
+#define OctetsReceivedOK				EMAC_RXC_OCTET	/* RX Octets Successfully Received Count                                */
+#define FramesLostDueToIntMACRcvError	EMAC_RXC_DMAOVF	/* Internal MAC Sublayer Error RX Frame Count                   */
+#define UnicastFramesReceivedOK			EMAC_RXC_UNICST	/* Unicast RX Frame Count                                                               */
+#define MulticastFramesReceivedOK		EMAC_RXC_MULTI	/* Multicast RX Frame Count                                                             */
+#define BroadcastFramesReceivedOK		EMAC_RXC_BROAD	/* Broadcast RX Frame Count                                                             */
+#define InRangeLengthErrors				EMAC_RXC_LNERRI	/* RX Frame In Range Error Count                                                */
+#define OutOfRangeLengthField			EMAC_RXC_LNERRO	/* RX Frame Out Of Range Error Count                                    */
+#define FrameTooLongErrors				EMAC_RXC_LONG	/* RX Frame Too Long Count                                                              */
+#define MACControlFramesReceived		EMAC_RXC_MACCTL	/* MAC Control RX Frame Count                                                   */
+#define UnsupportedOpcodesReceived		EMAC_RXC_OPCODE	/* Unsupported Op-Code RX Frame Count                                   */
+#define PAUSEMACCtrlFramesReceived		EMAC_RXC_PAUSE	/* MAC Control Pause RX Frame Count                                             */
+#define FramesReceivedAll				EMAC_RXC_ALLFRM	/* Overall RX Frame Count                                                               */
+#define OctetsReceivedAll				EMAC_RXC_ALLOCT	/* Overall RX Octet Count                                                               */
+#define TypedFramesReceived				EMAC_RXC_TYPED	/* Type/Length Consistent RX Frame Count                                */
+#define FramesLenLt64Received			EMAC_RXC_SHORT	/* RX Frame Fragment Count - Byte Count x < 64                  */
+#define FramesLenEq64Received			EMAC_RXC_EQ64	/* Good RX Frame Count - Byte Count x = 64                              */
+#define FramesLen65_127Received			EMAC_RXC_LT128	/* Good RX Frame Count - Byte Count  64 <= x < 128              */
+#define FramesLen128_255Received		EMAC_RXC_LT256	/* Good RX Frame Count - Byte Count 128 <= x < 256              */
+#define FramesLen256_511Received		EMAC_RXC_LT512	/* Good RX Frame Count - Byte Count 256 <= x < 512              */
+#define FramesLen512_1023Received		EMAC_RXC_LT1024	/* Good RX Frame Count - Byte Count 512 <= x < 1024             */
+#define FramesLen1024_MaxReceived		EMAC_RXC_GE1024	/* Good RX Frame Count - Byte Count x >= 1024                   */
+
+#define FramesTransmittedOK				EMAC_TXC_OK	/* TX Frame Successful Count                                                    */
+#define SingleCollisionFrames			EMAC_TXC_1COL	/* TX Frames Successful After Single Collision Count    */
+#define MultipleCollisionFrames			EMAC_TXC_GT1COL	/* TX Frames Successful After Multiple Collisions Count */
+#define OctetsTransmittedOK				EMAC_TXC_OCTET	/* TX Octets Successfully Received Count                                */
+#define FramesWithDeferredXmissions		EMAC_TXC_DEFER	/* TX Frame Delayed Due To Busy Count                                   */
+#define LateCollisions					EMAC_TXC_LATECL	/* Late TX Collisions Count                                                             */
+#define FramesAbortedDueToXSColls		EMAC_TXC_XS_COL	/* TX Frame Failed Due To Excessive Collisions Count    */
+#define FramesLostDueToIntMacXmitError	EMAC_TXC_DMAUND	/* Internal MAC Sublayer Error TX Frame Count                   */
+#define CarrierSenseErrors				EMAC_TXC_CRSERR	/* Carrier Sense Deasserted During TX Frame Count               */
+#define UnicastFramesXmittedOK			EMAC_TXC_UNICST	/* Unicast TX Frame Count                                                               */
+#define MulticastFramesXmittedOK		EMAC_TXC_MULTI	/* Multicast TX Frame Count                                                             */
+#define BroadcastFramesXmittedOK		EMAC_TXC_BROAD	/* Broadcast TX Frame Count                                                             */
+#define FramesWithExcessiveDeferral		EMAC_TXC_XS_DFR	/* TX Frames With Excessive Deferral Count                              */
+#define MACControlFramesTransmitted		EMAC_TXC_MACCTL	/* MAC Control TX Frame Count                                                   */
+#define FramesTransmittedAll			EMAC_TXC_ALLFRM	/* Overall TX Frame Count                                                               */
+#define OctetsTransmittedAll			EMAC_TXC_ALLOCT	/* Overall TX Octet Count                                                               */
+#define FramesLenEq64Transmitted		EMAC_TXC_EQ64	/* Good TX Frame Count - Byte Count x = 64                              */
+#define FramesLen65_127Transmitted		EMAC_TXC_LT128	/* Good TX Frame Count - Byte Count  64 <= x < 128              */
+#define FramesLen128_255Transmitted		EMAC_TXC_LT256	/* Good TX Frame Count - Byte Count 128 <= x < 256              */
+#define FramesLen256_511Transmitted		EMAC_TXC_LT512	/* Good TX Frame Count - Byte Count 256 <= x < 512              */
+#define FramesLen512_1023Transmitted	EMAC_TXC_LT1024	/* Good TX Frame Count - Byte Count 512 <= x < 1024             */
+#define FramesLen1024_MaxTransmitted	EMAC_TXC_GE1024	/* Good TX Frame Count - Byte Count x >= 1024                   */
+#define TxAbortedFrames					EMAC_TXC_ABORT	/* Total TX Frames Aborted Count                                                */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer:	All macros are intended to make C and Assembly code more readable.
+**				Use these macros carefully, as any that do left shifts for field
+**				depositing will result in the lower order bits being destroyed.  Any
+**				macro that shifts left to properly position the bit-field should be
+**				used as part of an OR to initialize a register and NOT as a dynamic
+**				modifier UNLESS the lower order bits are saved and ORed back in when
+**				the macro is used.
+*************************************************************************************/
+/************************  ETHERNET 10/100 CONTROLLER MASKS  ************************/
+/* EMAC_OPMODE Masks																*/
+#define	RE			0x00000001	/* Receiver Enable                                                                      */
+#define	ASTP		0x00000002	/* Enable Automatic Pad Stripping On RX Frames          */
+#define	HU			0x00000010	/* Hash Filter Unicast Address                                          */
+#define	HM			0x00000020	/* Hash Filter Multicast Address                                        */
+#define	PAM			0x00000040	/* Pass-All-Multicast Mode Enable                                       */
+#define	PR			0x00000080	/* Promiscuous Mode Enable                                                      */
+#define	IFE			0x00000100	/* Inverse Filtering Enable                                                     */
+#define	DBF			0x00000200	/* Disable Broadcast Frame Reception                            */
+#define	PBF			0x00000400	/* Pass Bad Frames Enable                                                       */
+#define	PSF			0x00000800	/* Pass Short Frames Enable                                                     */
+#define	RAF			0x00001000	/* Receive-All Mode                                                                     */
+#define	TE			0x00010000	/* Transmitter Enable                                                           */
+#define	DTXPAD		0x00020000	/* Disable Automatic TX Padding                                         */
+#define	DTXCRC		0x00040000	/* Disable Automatic TX CRC Generation                          */
+#define	DC			0x00080000	/* Deferral Check                                                                       */
+#define	BOLMT		0x00300000	/* Back-Off Limit                                                                       */
+#define	BOLMT_10	0x00000000	/*              10-bit range                                                            */
+#define	BOLMT_8		0x00100000	/*              8-bit range                                                                     */
+#define	BOLMT_4		0x00200000	/*              4-bit range                                                                     */
+#define	BOLMT_1		0x00300000	/*              1-bit range                                                                     */
+#define	DRTY		0x00400000	/* Disable TX Retry On Collision                                        */
+#define	LCTRE		0x00800000	/* Enable TX Retry On Late Collision                            */
+#define	RMII		0x01000000	/* RMII/MII* Mode                                                                       */
+#define	RMII_10		0x02000000	/* Speed Select for RMII Port (10MBit/100MBit*)         */
+#define	FDMODE		0x04000000	/* Duplex Mode Enable (Full/Half*)                                      */
+#define	LB			0x08000000	/* Internal Loopback Enable                                                     */
+#define	DRO			0x10000000	/* Disable Receive Own Frames (Half-Duplex Mode)        */
+
+/* EMAC_STAADD Masks																*/
+#define	STABUSY		0x00000001	/* Initiate Station Mgt Reg Access / STA Busy Stat      */
+#define	STAOP		0x00000002	/* Station Management Operation Code (Write/Read*)      */
+#define	STADISPRE	0x00000004	/* Disable Preamble Generation                                          */
+#define	STAIE		0x00000008	/* Station Mgt. Transfer Done Interrupt Enable          */
+#define	REGAD		0x000007C0	/* STA Register Address                                                         */
+#define	PHYAD		0x0000F800	/* PHY Device Address                                                           */
+
+#define	SET_REGAD(x)	(((x)&0x1F)<<  6 )	/* Set STA Register Address                             */
+#define	SET_PHYAD(x)	(((x)&0x1F)<< 11 )	/* Set PHY Device Address                               */
+
+/* EMAC_STADAT Mask											*/
+#define	STADATA		0x0000FFFF	/* Station Management Data      */
+
+/* EMAC_FLC Masks																	*/
+#define	FLCBUSY		0x00000001	/* Send Flow Ctrl Frame / Flow Ctrl Busy Status         */
+#define	FLCE		0x00000002	/* Flow Control Enable                                                          */
+#define	PCF			0x00000004	/* Pass Control Frames                                                          */
+#define	BKPRSEN		0x00000008	/* Enable Backpressure                                                          */
+#define	FLCPAUSE	0xFFFF0000	/* Pause Time                                                                           */
+
+#define	SET_FLCPAUSE(x)	(((x)&0xFFFF)<< 16)	/* Set Pause Time                                               */
+
+/* EMAC_WKUP_CTL Masks																*/
+#define	CAPWKFRM	0x00000001	/* Capture Wake-Up Frames                                                       */
+#define	MPKE		0x00000002	/* Magic Packet Enable                                                          */
+#define	RWKE		0x00000004	/* Remote Wake-Up Frame Enable                                          */
+#define	GUWKE		0x00000008	/* Global Unicast Wake Enable                                           */
+#define	MPKS		0x00000020	/* Magic Packet Received Status                                         */
+#define	RWKS		0x00000F00	/* Wake-Up Frame Received Status, Filters 3:0           */
+
+/* EMAC_WKUP_FFCMD Masks															*/
+#define	WF0_E		0x00000001	/* Enable Wake-Up Filter 0                                                      */
+#define	WF0_T		0x00000008	/* Wake-Up Filter 0 Addr Type (Multicast/Unicast*)      */
+#define	WF1_E		0x00000100	/* Enable Wake-Up Filter 1                                                      */
+#define	WF1_T		0x00000800	/* Wake-Up Filter 1 Addr Type (Multicast/Unicast*)      */
+#define	WF2_E		0x00010000	/* Enable Wake-Up Filter 2                                                      */
+#define	WF2_T		0x00080000	/* Wake-Up Filter 2 Addr Type (Multicast/Unicast*)      */
+#define	WF3_E		0x01000000	/* Enable Wake-Up Filter 3                                                      */
+#define	WF3_T		0x08000000	/* Wake-Up Filter 3 Addr Type (Multicast/Unicast*)      */
+
+/* EMAC_WKUP_FFOFF Masks															*/
+#define	WF0_OFF		0x000000FF	/* Wake-Up Filter 0 Pattern Offset                                      */
+#define	WF1_OFF		0x0000FF00	/* Wake-Up Filter 1 Pattern Offset                                      */
+#define	WF2_OFF		0x00FF0000	/* Wake-Up Filter 2 Pattern Offset                                      */
+#define	WF3_OFF		0xFF000000	/* Wake-Up Filter 3 Pattern Offset                                      */
+
+#define	SET_WF0_OFF(x) (((x)&0xFF)<<  0 )	/* Set Wake-Up Filter 0 Byte Offset           */
+#define	SET_WF1_OFF(x) (((x)&0xFF)<<  8 )	/* Set Wake-Up Filter 1 Byte Offset           */
+#define	SET_WF2_OFF(x) (((x)&0xFF)<< 16 )	/* Set Wake-Up Filter 2 Byte Offset           */
+#define	SET_WF3_OFF(x) (((x)&0xFF)<< 24 )	/* Set Wake-Up Filter 3 Byte Offset           */
+/* Set ALL Offsets																	*/
+#define	SET_WF_OFFS(x0,x1,x2,x3) 	(SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks															*/
+#define	WF0_CRC		0x0000FFFF	/* Wake-Up Filter 0 Pattern CRC                                         */
+#define	WF1_CRC		0xFFFF0000	/* Wake-Up Filter 1 Pattern CRC                                         */
+
+#define	SET_WF0_CRC(x) (((x)&0xFFFF)<<   0 )	/* Set Wake-Up Filter 0 Target CRC         */
+#define	SET_WF1_CRC(x) (((x)&0xFFFF)<<  16 )	/* Set Wake-Up Filter 1 Target CRC         */
+
+/* EMAC_WKUP_FFCRC1 Masks															*/
+#define	WF2_CRC		0x0000FFFF	/* Wake-Up Filter 2 Pattern CRC                                         */
+#define	WF3_CRC		0xFFFF0000	/* Wake-Up Filter 3 Pattern CRC                                         */
+
+#define	SET_WF2_CRC(x) (((x)&0xFFFF)<<   0 )	/* Set Wake-Up Filter 2 Target CRC         */
+#define	SET_WF3_CRC(x) (((x)&0xFFFF)<<  16 )	/* Set Wake-Up Filter 3 Target CRC         */
+
+/* EMAC_SYSCTL Masks																*/
+#define	PHYIE		0x00000001	/* PHY_INT Interrupt Enable                                                     */
+#define	RXDWA		0x00000002	/* Receive Frame DMA Word Alignment (Odd/Even*)         */
+#define	RXCKS		0x00000004	/* Enable RX Frame TCP/UDP Checksum Computation         */
+#define	TXDWA		0x00000010	/* Transmit Frame DMA Word Alignment (Odd/Even*)        */
+#define	MDCDIV		0x00003F00	/* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]          */
+
+#define	SET_MDCDIV(x)	(((x)&0x3F)<< 8)	/* Set MDC Clock Divisor                                */
+
+/* EMAC_SYSTAT Masks															*/
+#define	PHYINT		0x00000001	/* PHY_INT Interrupt Status                                             */
+#define	MMCINT		0x00000002	/* MMC Counter Interrupt Status                                 */
+#define	RXFSINT		0x00000004	/* RX Frame-Status Interrupt Status                             */
+#define	TXFSINT		0x00000008	/* TX Frame-Status Interrupt Status                             */
+#define	WAKEDET		0x00000010	/* Wake-Up Detected Status                                              */
+#define	RXDMAERR	0x00000020	/* RX DMA Direction Error Status                                */
+#define	TXDMAERR	0x00000040	/* TX DMA Direction Error Status                                */
+#define	STMDONE		0x00000080	/* Station Mgt. Transfer Done Interrupt Status  */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks							*/
+#define	RX_FRLEN	0x000007FF	/* Frame Length In Bytes                                                */
+#define	RX_COMP		0x00001000	/* RX Frame Complete                                                    */
+#define	RX_OK		0x00002000	/* RX Frame Received With No Errors                             */
+#define	RX_LONG		0x00004000	/* RX Frame Too Long Error                                              */
+#define	RX_ALIGN	0x00008000	/* RX Frame Alignment Error                                             */
+#define	RX_CRC		0x00010000	/* RX Frame CRC Error                                                   */
+#define	RX_LEN		0x00020000	/* RX Frame Length Error                                                */
+#define	RX_FRAG		0x00040000	/* RX Frame Fragment Error                                              */
+#define	RX_ADDR		0x00080000	/* RX Frame Address Filter Failed Error                 */
+#define	RX_DMAO		0x00100000	/* RX Frame DMA Overrun Error                                   */
+#define	RX_PHY		0x00200000	/* RX Frame PHY Error                                                   */
+#define	RX_LATE		0x00400000	/* RX Frame Late Collision Error                                */
+#define	RX_RANGE	0x00800000	/* RX Frame Length Field Out of Range Error             */
+#define	RX_MULTI	0x01000000	/* RX Multicast Frame Indicator                                 */
+#define	RX_BROAD	0x02000000	/* RX Broadcast Frame Indicator                                 */
+#define	RX_CTL		0x04000000	/* RX Control Frame Indicator                                   */
+#define	RX_UCTL		0x08000000	/* Unsupported RX Control Frame Indicator               */
+#define	RX_TYPE		0x10000000	/* RX Typed Frame Indicator                                             */
+#define	RX_VLAN1	0x20000000	/* RX VLAN1 Frame Indicator                                             */
+#define	RX_VLAN2	0x40000000	/* RX VLAN2 Frame Indicator                                             */
+#define	RX_ACCEPT	0x80000000	/* RX Frame Accepted Indicator                                  */
+
+/*  EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks							*/
+#define	TX_COMP		0x00000001	/* TX Frame Complete                                                    */
+#define	TX_OK		0x00000002	/* TX Frame Sent With No Errors                                 */
+#define	TX_ECOLL	0x00000004	/* TX Frame Excessive Collision Error                   */
+#define	TX_LATE		0x00000008	/* TX Frame Late Collision Error                                */
+#define	TX_DMAU		0x00000010	/* TX Frame DMA Underrun Error (STAT)                   */
+#define	TX_MACE		0x00000010	/* Internal MAC Error Detected (STKY and IRQE)  */
+#define	TX_EDEFER	0x00000020	/* TX Frame Excessive Deferral Error                    */
+#define	TX_BROAD	0x00000040	/* TX Broadcast Frame Indicator                                 */
+#define	TX_MULTI	0x00000080	/* TX Multicast Frame Indicator                                 */
+#define	TX_CCNT		0x00000F00	/* TX Frame Collision Count                                             */
+#define	TX_DEFER	0x00001000	/* TX Frame Deferred Indicator                                  */
+#define	TX_CRS		0x00002000	/* TX Frame Carrier Sense Not Asserted Error    */
+#define	TX_LOSS		0x00004000	/* TX Frame Carrier Lost During TX Error                */
+#define	TX_RETRY	0x00008000	/* TX Frame Successful After Retry                              */
+#define	TX_FRLEN	0x07FF0000	/* TX Frame Length (Bytes)                                              */
+
+/* EMAC_MMC_CTL Masks															*/
+#define	RSTC		0x00000001	/* Reset All Counters                                                   */
+#define	CROLL		0x00000002	/* Counter Roll-Over Enable                                             */
+#define	CCOR		0x00000004	/* Counter Clear-On-Read Mode Enable                    */
+#define	MMCE		0x00000008	/* Enable MMC Counter Operation                                 */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks											*/
+#define	RX_OK_CNT		0x00000001	/* RX Frames Received With No Errors                    */
+#define	RX_FCS_CNT		0x00000002	/* RX Frames W/Frame Check Sequence Errors              */
+#define	RX_ALIGN_CNT	0x00000004	/* RX Frames With Alignment Errors                              */
+#define	RX_OCTET_CNT	0x00000008	/* RX Octets Received OK                                                */
+#define	RX_LOST_CNT		0x00000010	/* RX Frames Lost Due To Internal MAC RX Error  */
+#define	RX_UNI_CNT		0x00000020	/* Unicast RX Frames Received OK                                */
+#define	RX_MULTI_CNT	0x00000040	/* Multicast RX Frames Received OK                              */
+#define	RX_BROAD_CNT	0x00000080	/* Broadcast RX Frames Received OK                              */
+#define	RX_IRL_CNT		0x00000100	/* RX Frames With In-Range Length Errors                */
+#define	RX_ORL_CNT		0x00000200	/* RX Frames With Out-Of-Range Length Errors    */
+#define	RX_LONG_CNT		0x00000400	/* RX Frames With Frame Too Long Errors                 */
+#define	RX_MACCTL_CNT	0x00000800	/* MAC Control RX Frames Received                               */
+#define	RX_OPCODE_CTL	0x00001000	/* Unsupported Op-Code RX Frames Received               */
+#define	RX_PAUSE_CNT	0x00002000	/* PAUSEMAC Control RX Frames Received                  */
+#define	RX_ALLF_CNT		0x00004000	/* All RX Frames Received                                               */
+#define	RX_ALLO_CNT		0x00008000	/* All RX Octets Received                                               */
+#define	RX_TYPED_CNT	0x00010000	/* Typed RX Frames Received                                             */
+#define	RX_SHORT_CNT	0x00020000	/* RX Frame Fragments (< 64 Bytes) Received             */
+#define	RX_EQ64_CNT		0x00040000	/* 64-Byte RX Frames Received                                   */
+#define	RX_LT128_CNT	0x00080000	/* 65-127-Byte RX Frames Received                               */
+#define	RX_LT256_CNT	0x00100000	/* 128-255-Byte RX Frames Received                              */
+#define	RX_LT512_CNT	0x00200000	/* 256-511-Byte RX Frames Received                              */
+#define	RX_LT1024_CNT	0x00400000	/* 512-1023-Byte RX Frames Received                             */
+#define	RX_GE1024_CNT	0x00800000	/* 1024-Max-Byte RX Frames Received                             */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks											*/
+#define	TX_OK_CNT		0x00000001	/* TX Frames Sent OK                                                    */
+#define	TX_SCOLL_CNT	0x00000002	/* TX Frames With Single Collisions                             */
+#define	TX_MCOLL_CNT	0x00000004	/* TX Frames With Multiple Collisions                   */
+#define	TX_OCTET_CNT	0x00000008	/* TX Octets Sent OK                                                    */
+#define	TX_DEFER_CNT	0x00000010	/* TX Frames With Deferred Transmission                 */
+#define	TX_LATE_CNT		0x00000020	/* TX Frames With Late Collisions                               */
+#define	TX_ABORTC_CNT	0x00000040	/* TX Frames Aborted Due To Excess Collisions   */
+#define	TX_LOST_CNT		0x00000080	/* TX Frames Lost Due To Internal MAC TX Error  */
+#define	TX_CRS_CNT		0x00000100	/* TX Frames With Carrier Sense Errors                  */
+#define	TX_UNI_CNT		0x00000200	/* Unicast TX Frames Sent                                               */
+#define	TX_MULTI_CNT	0x00000400	/* Multicast TX Frames Sent                                             */
+#define	TX_BROAD_CNT	0x00000800	/* Broadcast TX Frames Sent                                             */
+#define	TX_EXDEF_CTL	0x00001000	/* TX Frames With Excessive Deferral                    */
+#define	TX_MACCTL_CNT	0x00002000	/* MAC Control TX Frames Sent                                   */
+#define	TX_ALLF_CNT		0x00004000	/* All TX Frames Sent                                                   */
+#define	TX_ALLO_CNT		0x00008000	/* All TX Octets Sent                                                   */
+#define	TX_EQ64_CNT		0x00010000	/* 64-Byte TX Frames Sent                                               */
+#define	TX_LT128_CNT	0x00020000	/* 65-127-Byte TX Frames Sent                                   */
+#define	TX_LT256_CNT	0x00040000	/* 128-255-Byte TX Frames Sent                                  */
+#define	TX_LT512_CNT	0x00080000	/* 256-511-Byte TX Frames Sent                                  */
+#define	TX_LT1024_CNT	0x00100000	/* 512-1023-Byte TX Frames Sent                                 */
+#define	TX_GE1024_CNT	0x00200000	/* 1024-Max-Byte TX Frames Sent                                 */
+#define	TX_ABORT_CNT	0x00400000	/* TX Frames Aborted                                                    */
+
+#endif				/* _DEF_BF537_H */
diff --git a/arch/blackfin/mach-bf537/include/mach/dma.h b/arch/blackfin/mach-bf537/include/mach/dma.h
new file mode 100644
index 00000000000..7a964040870
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/dma.h
@@ -0,0 +1,55 @@
+/*
+ * file:         include/asm-blackfin/mach-bf537/dma.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_BLACKFIN_DMA_CHANNEL 16
+
+#define CH_PPI 			    0
+#define CH_EMAC_RX 		    1
+#define CH_EMAC_TX 		    2
+#define CH_SPORT0_RX 		3
+#define CH_SPORT0_TX 		4
+#define CH_SPORT1_RX 		5
+#define CH_SPORT1_TX 		6
+#define CH_SPI 			    7
+#define CH_UART0_RX 		8
+#define CH_UART0_TX 		9
+#define CH_UART1_RX 		10
+#define CH_UART1_TX 		11
+
+#define CH_MEM_STREAM0_DEST	12	 /* TX */
+#define CH_MEM_STREAM0_SRC  	13	 /* RX */
+#define CH_MEM_STREAM1_DEST	14	 /* TX */
+#define CH_MEM_STREAM1_SRC 	15	 /* RX */
+
+#endif
diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
new file mode 100644
index 00000000000..2e68a8a1e73
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -0,0 +1,214 @@
+/*
+ * file:         include/asm-blackfin/mach-bf537/irq.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _BF537_IRQ_H_
+#define _BF537_IRQ_H_
+
+/*
+ * Interrupt source definitions
+ *            Event Source    Core Event Name
+ * Core       Emulation               **
+ * Events         (highest priority)  EMU         0
+ *            Reset                   RST         1
+ *            NMI                     NMI         2
+ *            Exception               EVX         3
+ *            Reserved                --          4
+ *            Hardware Error          IVHW        5
+ *            Core Timer              IVTMR       6
+ *  .....
+ *
+ *            Softirq		      IVG14
+ *            System Call    --
+ *               (lowest priority)    IVG15
+ */
+
+#define SYS_IRQS        39
+#define NR_PERI_INTS    32
+
+/* The ABSTRACT IRQ definitions */
+/** the first seven of the following are fixed, the rest you change if you need to **/
+#define IRQ_EMU             0	/*Emulation */
+#define IRQ_RST             1	/*reset */
+#define IRQ_NMI             2	/*Non Maskable */
+#define IRQ_EVX             3	/*Exception */
+#define IRQ_UNUSED          4	/*- unused interrupt*/
+#define IRQ_HWERR           5	/*Hardware Error */
+#define IRQ_CORETMR         6	/*Core timer */
+
+#define IRQ_PLL_WAKEUP      7	/*PLL Wakeup Interrupt */
+#define IRQ_DMA_ERROR       8	/*DMA Error (general) */
+#define IRQ_GENERIC_ERROR   9	/*GENERIC Error Interrupt */
+#define IRQ_RTC             10	/*RTC Interrupt */
+#define IRQ_PPI             11	/*DMA0 Interrupt (PPI) */
+#define IRQ_SPORT0_RX       12	/*DMA3 Interrupt (SPORT0 RX) */
+#define IRQ_SPORT0_TX       13	/*DMA4 Interrupt (SPORT0 TX) */
+#define IRQ_SPORT1_RX       14	/*DMA5 Interrupt (SPORT1 RX) */
+#define IRQ_SPORT1_TX       15	/*DMA6 Interrupt (SPORT1 TX) */
+#define IRQ_TWI             16	/*TWI Interrupt */
+#define IRQ_SPI             17	/*DMA7 Interrupt (SPI) */
+#define IRQ_UART0_RX        18	/*DMA8 Interrupt (UART0 RX) */
+#define IRQ_UART0_TX        19	/*DMA9 Interrupt (UART0 TX) */
+#define IRQ_UART1_RX        20	/*DMA10 Interrupt (UART1 RX) */
+#define IRQ_UART1_TX        21	/*DMA11 Interrupt (UART1 TX) */
+#define IRQ_CAN_RX          22	/*CAN Receive Interrupt */
+#define IRQ_CAN_TX          23	/*CAN Transmit Interrupt */
+#define IRQ_MAC_RX          24	/*DMA1 (Ethernet RX) Interrupt */
+#define IRQ_MAC_TX          25	/*DMA2 (Ethernet TX) Interrupt */
+#define IRQ_TMR0            26	/*Timer 0 */
+#define IRQ_TMR1            27	/*Timer 1 */
+#define IRQ_TMR2            28	/*Timer 2 */
+#define IRQ_TMR3            29	/*Timer 3 */
+#define IRQ_TMR4            30	/*Timer 4 */
+#define IRQ_TMR5            31	/*Timer 5 */
+#define IRQ_TMR6            32	/*Timer 6 */
+#define IRQ_TMR7            33	/*Timer 7 */
+#define IRQ_PROG_INTA       34	/* PF Ports F&G (PF15:0) Interrupt A */
+#define IRQ_PORTG_INTB      35	/* PF Port G (PF15:0) Interrupt B */
+#define IRQ_MEM_DMA0        36	/*(Memory DMA Stream 0) */
+#define IRQ_MEM_DMA1        37	/*(Memory DMA Stream 1) */
+#define IRQ_PROG_INTB	      38	/* PF Ports F (PF15:0) Interrupt B */
+#define IRQ_WATCH           38	/*Watch Dog Timer */
+
+#define IRQ_PPI_ERROR       42	/*PPI Error Interrupt */
+#define IRQ_CAN_ERROR       43	/*CAN Error Interrupt */
+#define IRQ_MAC_ERROR       44	/*PPI Error Interrupt */
+#define IRQ_SPORT0_ERROR    45	/*SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR    46	/*SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR       47	/*SPI Error Interrupt */
+#define IRQ_UART0_ERROR     48	/*UART Error Interrupt */
+#define IRQ_UART1_ERROR     49	/*UART Error Interrupt */
+
+#define IRQ_PF0         50
+#define IRQ_PF1         51
+#define IRQ_PF2         52
+#define IRQ_PF3         53
+#define IRQ_PF4         54
+#define IRQ_PF5         55
+#define IRQ_PF6         56
+#define IRQ_PF7         57
+#define IRQ_PF8         58
+#define IRQ_PF9         59
+#define IRQ_PF10        60
+#define IRQ_PF11        61
+#define IRQ_PF12        62
+#define IRQ_PF13        63
+#define IRQ_PF14        64
+#define IRQ_PF15        65
+
+#define IRQ_PG0         66
+#define IRQ_PG1         67
+#define IRQ_PG2         68
+#define IRQ_PG3         69
+#define IRQ_PG4         70
+#define IRQ_PG5         71
+#define IRQ_PG6         72
+#define IRQ_PG7         73
+#define IRQ_PG8         74
+#define IRQ_PG9         75
+#define IRQ_PG10        76
+#define IRQ_PG11        77
+#define IRQ_PG12        78
+#define IRQ_PG13        79
+#define IRQ_PG14        80
+#define IRQ_PG15        81
+
+#define IRQ_PH0         82
+#define IRQ_PH1         83
+#define IRQ_PH2         84
+#define IRQ_PH3         85
+#define IRQ_PH4         86
+#define IRQ_PH5         87
+#define IRQ_PH6         88
+#define IRQ_PH7         89
+#define IRQ_PH8         90
+#define IRQ_PH9         91
+#define IRQ_PH10        92
+#define IRQ_PH11        93
+#define IRQ_PH12        94
+#define IRQ_PH13        95
+#define IRQ_PH14        96
+#define IRQ_PH15        97
+
+#define GPIO_IRQ_BASE	IRQ_PF0
+
+#define NR_IRQS     (IRQ_PH15+1)
+
+#define IVG7            7
+#define IVG8            8
+#define IVG9            9
+#define IVG10           10
+#define IVG11           11
+#define IVG12           12
+#define IVG13           13
+#define IVG14           14
+#define IVG15           15
+
+/* IAR0 BIT FIELDS*/
+#define IRQ_PLL_WAKEUP_POS  0
+#define IRQ_DMA_ERROR_POS   4
+#define IRQ_ERROR_POS       8
+#define IRQ_RTC_POS         12
+#define IRQ_PPI_POS         16
+#define IRQ_SPORT0_RX_POS   20
+#define IRQ_SPORT0_TX_POS   24
+#define IRQ_SPORT1_RX_POS   28
+
+/* IAR1 BIT FIELDS*/
+#define IRQ_SPORT1_TX_POS   0
+#define IRQ_TWI_POS         4
+#define IRQ_SPI_POS         8
+#define IRQ_UART0_RX_POS    12
+#define IRQ_UART0_TX_POS    16
+#define IRQ_UART1_RX_POS    20
+#define IRQ_UART1_TX_POS    24
+#define IRQ_CAN_RX_POS      28
+
+/* IAR2 BIT FIELDS*/
+#define IRQ_CAN_TX_POS      0
+#define IRQ_MAC_RX_POS      4
+#define IRQ_MAC_TX_POS      8
+#define IRQ_TMR0_POS        12
+#define IRQ_TMR1_POS        16
+#define IRQ_TMR2_POS        20
+#define IRQ_TMR3_POS        24
+#define IRQ_TMR4_POS        28
+
+/* IAR3 BIT FIELDS*/
+#define IRQ_TMR5_POS        0
+#define IRQ_TMR6_POS        4
+#define IRQ_TMR7_POS        8
+#define IRQ_PROG_INTA_POS   12
+#define IRQ_PORTG_INTB_POS   16
+#define IRQ_MEM_DMA0_POS    20
+#define IRQ_MEM_DMA1_POS    24
+#define IRQ_WATCH_POS       28
+
+#endif				/* _BF537_IRQ_H_ */
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_init.h b/arch/blackfin/mach-bf537/include/mach/mem_init.h
new file mode 100644
index 00000000000..f67698f670c
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/mem_init.h
@@ -0,0 +1,303 @@
+/*
+ * File:         include/asm-blackfin/mach-bf537/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC16M8A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M8A2_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+  /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h
new file mode 100644
index 00000000000..5078b669431
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h
@@ -0,0 +1,179 @@
+/*
+ * file:         include/asm-blackfin/mach-bf537/mem_map.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	Memory MAP Common header file for blackfin BF537/6/4 of processors.
+ * rev:
+ *
+ * modified:
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MEM_MAP_537_H_
+#define _MEM_MAP_537_H_
+
+#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
+#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x800
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF537 processors */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+
+#ifdef CONFIG_BF537
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif /*CONFIG_BF537*/
+
+/* Memory Map for ADSP-BF536 processors */
+
+#ifdef CONFIG_BF536
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+
+#define L1_CODE_LENGTH      0xC000
+
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif
+
+/* Memory Map for ADSP-BF534 processors */
+
+#ifdef CONFIG_BF534
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+#endif
+
+/* Level 2 Memory - none */
+
+#define L2_START	0
+#define L2_LENGTH	0
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START	0xFFB00000
+#define L1_SCRATCH_LENGTH	0x1000
+
+#endif				/* _MEM_MAP_537_H_ */
diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
new file mode 100644
index 00000000000..78fee6e0f23
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/portmux.h
@@ -0,0 +1,144 @@
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES 	(MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE)	/* We additionally handle PORTJ */
+
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_TMR0		(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_DMAR0		(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_DMAR1		(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_TACLK0	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+#define P_MII0_ETxD0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_MII0_ETxD1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_MII0_ETxD3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_MII0_ETxEN	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MII0_PHYINT	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MII0_COL	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_MII0_ERxD0	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_MII0_ERxD1	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_MII0_ERxD2	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_MII0_ERxD3	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_MII0_ERxDV	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_MII0_ERxCLK	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
+#define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
+#define P_RMII0_REF_CLK	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_RMII0_MDINT	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_RMII0_CRS_DV	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
+
+#define PORT_PJ0	(GPIO_PH15 + 1)
+#define PORT_PJ1	(GPIO_PH15 + 2)
+#define PORT_PJ2	(GPIO_PH15 + 3)
+#define PORT_PJ3	(GPIO_PH15 + 4)
+#define PORT_PJ4	(GPIO_PH15 + 5)
+#define PORT_PJ5	(GPIO_PH15 + 6)
+#define PORT_PJ6	(GPIO_PH15 + 7)
+#define PORT_PJ7	(GPIO_PH15 + 8)
+#define PORT_PJ8	(GPIO_PH15 + 9)
+#define PORT_PJ9	(GPIO_PH15 + 10)
+#define PORT_PJ10	(GPIO_PH15 + 11)
+#define PORT_PJ11	(GPIO_PH15 + 12)
+
+#define P_MDC		(P_DEFINED | P_IDENT(PORT_PJ0) | P_FUNCT(0))
+#define P_MDIO		(P_DEFINED | P_IDENT(PORT_PJ1) | P_FUNCT(0))
+#define P_TWI0_SCL	(P_DEFINED | P_IDENT(PORT_PJ2) | P_FUNCT(0))
+#define P_TWI0_SDA	(P_DEFINED | P_IDENT(PORT_PJ3) | P_FUNCT(0))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(0))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(0))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(PORT_PJ6) | P_FUNCT(0))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(PORT_PJ7) | P_FUNCT(0))
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0))
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(0))
+#define P_CAN0_RX	(P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1))
+#define P_CAN0_TX	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
+
+#define P_MII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxD2, \
+	P_MII0_ETxD3, \
+	P_MII0_ETxEN, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_COL, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxD2, \
+	P_MII0_ERxD3, \
+	P_MII0_ERxDV, \
+	P_MII0_ERxCLK, \
+	P_MII0_ERxER, \
+	P_MII0_CRS, \
+	P_MDC, \
+	P_MDIO, 0}
+
+
+#define P_RMII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxEN, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxER, \
+	P_RMII0_REF_CLK, \
+	P_RMII0_MDINT, \
+	P_RMII0_CRS_DV, \
+	P_MDC, \
+	P_MDIO, 0}
+#endif			        	/* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
index a8b915f202e..b1300b3f181 100644
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 4f4ae8787ed..ce934ee174e 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -45,7 +45,7 @@
 #include <asm/gpio.h>
 #include <asm/nand.h>
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 #include <asm/dpmc.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
@@ -61,7 +61,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548";
 
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
 	.width =	480,
@@ -319,12 +319,12 @@ static struct platform_device bfin_atapi_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = 4 * SIZE_1M,
 		.size = (256 - 4) * SIZE_1M,
 	},
@@ -377,12 +377,12 @@ static struct platform_device bf54x_sdh_device = {
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = 0x1c0000,
 		.offset = 0x40000
 	}
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index af7c211a580..39357693046 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -48,7 +48,7 @@
 #include <asm/nand.h>
 #include <asm/dpmc.h>
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
 
@@ -61,9 +61,52 @@ const char bfin_board_name[] = "ADSP-BF548-EZKIT";
  *  Driver needs to know address, irq and flag pin.
  */
 
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+	[0] = {
+		.name	= "isp1761-regs",
+		.start  = 0x2C0C0000,
+		.end    = 0x2C0C0000 + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PG7,
+		.end    = IRQ_PG7,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_isp1761_device = {
+	.name           = "isp1761",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+	.resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+	&bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING);
+
+	return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+	platform_device_unregister(&bfin_isp1761_device);
+}
+arch_initcall(bfin_isp1761_init);
+#endif
+
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
 	.width =	480,
@@ -177,6 +220,7 @@ static struct resource bfin_uart_resources[] = {
 	{
 		.start = 0xFFC03100,
 		.end = 0xFFC031FF,
+		.flags = IORESOURCE_MEM,
 	},
 #endif
 };
@@ -321,12 +365,12 @@ static struct platform_device bfin_atapi_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "Linux Kernel",
+		.name = "linux kernel(nand)",
 		.offset = 0,
 		.size = 4 * SIZE_1M,
 	},
 	{
-		.name = "File System",
+		.name = "file system(nand)",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
 	},
@@ -375,15 +419,15 @@ static struct platform_device bf54x_sdh_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -417,12 +461,12 @@ static struct platform_device ezkit_flash_device = {
 /* SPI flash chip (m25p16) */
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "linux kernel",
+		.name = "linux kernel(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index f7191141a3c..4d5cfeacb12 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -30,265 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK   0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer  Registers*/
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers*/
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-	[p0] = R0;
-	SSYNC;
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-	[p0] = R0;
-	SSYNC;
-
-	/* Initialize stack pointer */
-	SP.L = LO(INITIAL_STACK);
-	SP.H = HI(INITIAL_STACK);
-	FP = SP;
-	USP = SP;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_MBSCTL);
-	p2.l = lo(EBIU_MBSCTL);
-	r0.h = hi(CONFIG_EBIU_MBSCTLVAL);
-	r0.l = lo(CONFIG_EBIU_MBSCTLVAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_MODE);
-	p2.l = lo(EBIU_MODE);
-	r0.h = hi(CONFIG_EBIU_MODEVAL);
-	r0.l = lo(CONFIG_EBIU_MODEVAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_FCTL);
-	p2.l = lo(EBIU_FCTL);
-	r0.h = hi(CONFIG_EBIU_FCTLVAL);
-	r0.l = lo(CONFIG_EBIU_FCTLVAL);
-	[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop;
-	nop;
-	nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-
-	/*
-	 *  load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	call _start_kernel;
-.L_exit:
-	jump.s	.L_exit;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -443,13 +191,6 @@ ENTRY(_start_dma_code)
 	SSYNC;
 #endif
 
-	p0.h = hi(SIC_IWR0);
-	p0.l = lo(SIC_IWR0);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
new file mode 100644
index 00000000000..3ad59655881
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -0,0 +1,100 @@
+/*
+ * File: include/asm-blackfin/mach-bf548/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ *  - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* False Hardware Error Exception when ISR context is not restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 1)
+/* TWI Slave Boot Mode Is Not Functional */
+#define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
+/* External FIFO Boot Mode Is Not Functional */
+#define ANOMALY_05000325 (__SILICON_REVISION__ < 1)
+/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
+#define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (__SILICON_REVISION__ < 1)
+/* Synchronous Burst Flash Boot Mode Is Not Functional */
+#define ANOMALY_05000329 (__SILICON_REVISION__ < 1)
+/* Host DMA Boot Mode Is Not Functional */
+#define ANOMALY_05000330 (__SILICON_REVISION__ < 1)
+/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
+#define ANOMALY_05000334 (__SILICON_REVISION__ < 1)
+/* Inadequate Rotary Debounce Logic Duration */
+#define ANOMALY_05000335 (__SILICON_REVISION__ < 1)
+/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */
+#define ANOMALY_05000336 (__SILICON_REVISION__ < 1)
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (__SILICON_REVISION__ < 1)
+/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
+#define ANOMALY_05000338 (__SILICON_REVISION__ < 1)
+/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */
+#define ANOMALY_05000340 (__SILICON_REVISION__ < 1)
+/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
+#define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
+/* USB Calibration Value Is Not Intialized */
+#define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
+/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+#define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
+/* Data Lost when Core Reads SDH Data FIFO */
+#define ANOMALY_05000349 (__SILICON_REVISION__ < 1)
+/* PLL Status Register Is Inaccurate */
+#define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* External Memory Read Access Hangs Core With PLL Bypass */
+#define ANOMALY_05000360 (1)
+/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
+#define ANOMALY_05000365 (1)
+/* Addressing Conflict between Boot ROM and Asynchronous Memory */
+#define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* Mobile DDR Operation Not Functional */
+#define ANOMALY_05000377 (1)
+/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
+#define ANOMALY_05000378 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000363 (0)
+
+#endif
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
new file mode 100644
index 00000000000..e748588e893
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -0,0 +1,127 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/bf548.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  System MMR register and memory map for ADSP-BF548
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __MACH_BF548_H__
+#define __MACH_BF548_H__
+
+#define SUPPORTED_REVID 0
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR	0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN)
+
+#if defined(CONFIG_BF542)
+# define CPU   "BF542"
+# define CPUID 0x027c8000
+#elif defined(CONFIG_BF544)
+# define CPU "BF544"
+# define CPUID 0x027c8000
+#elif defined(CONFIG_BF547)
+# define CPU "BF547"
+#elif defined(CONFIG_BF548)
+# define CPU "BF548"
+# define CPUID 0x027c6000
+#elif defined(CONFIG_BF549)
+# define CPU "BF549"
+#else
+# define CPU "UNKNOWN"
+# define CPUID 0x0
+#endif
+
+#endif	/* __MACH_BF48_H__  */
diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
new file mode 100644
index 00000000000..9c7ca62a45e
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
@@ -0,0 +1,30 @@
+#ifndef BF54X_LQ043_H
+#define BF54X_LQ043_H
+
+struct bfin_bf54xfb_val {
+	unsigned int	defval;
+	unsigned int	min;
+	unsigned int	max;
+};
+
+struct bfin_bf54xfb_mach_info {
+	unsigned char	fixed_syncs;	/* do not update sync/border */
+
+	/* LCD types */
+	int		type;
+
+	/* Screen size */
+	int		width;
+	int		height;
+
+	/* Screen info */
+	struct bfin_bf54xfb_val xres;
+	struct bfin_bf54xfb_val yres;
+	struct bfin_bf54xfb_val bpp;
+
+	/* GPIOs */
+	unsigned short 		disp;
+
+};
+
+#endif /* BF54X_LQ043_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
new file mode 100644
index 00000000000..1fb4ec77cc2
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
@@ -0,0 +1,17 @@
+#ifndef _BFIN_KPAD_H
+#define _BFIN_KPAD_H
+
+struct bfin_kpad_platform_data {
+	int rows;
+	int cols;
+	const unsigned int *keymap;
+	unsigned short keymapsize;
+	unsigned short repeat;
+	u32 debounce_time;	/* in ns */
+	u32 coldrive_time;	/* in ns */
+	u32 keyup_test_interval; /* in ms */
+};
+
+#define KEYVAL(col, row, val) (((1 << col) << 24) | ((1 << row) << 16) | (val))
+
+#endif
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
new file mode 100644
index 00000000000..5e29446a8e0
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -0,0 +1,220 @@
+/*
+ * file:        include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	blackfin serial driver head file
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER_SET))
+#define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
+#define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+#define UART_GET_MSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_MSR))
+#define UART_GET_MCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_MCR))
+
+#define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
+#define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
+#define UART_SET_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v)
+#define UART_CLEAR_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
+#define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LSR(uart,v)	bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
+#define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_CLEAR_LSR(uart)    bfin_write16(((uart)->port.membase + OFFSET_LSR), -1)
+#define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+#define UART_PUT_MCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_MCR),v)
+
+#define UART_SET_DLAB(uart)     /* MMRs not muxed on BF54x */
+#define UART_CLEAR_DLAB(uart)   /* MMRs not muxed on BF54x */
+
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+# define CONFIG_SERIAL_BFIN_CTSRTS
+
+# ifndef CONFIG_UART0_CTS_PIN
+#  define CONFIG_UART0_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART0_RTS_PIN
+#  define CONFIG_UART0_RTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_CTS_PIN
+#  define CONFIG_UART1_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_RTS_PIN
+#  define CONFIG_UART1_RTS_PIN -1
+# endif
+#endif
+/*
+ * The pin configuration is different from schematic
+ */
+struct bfin_serial_port {
+        struct uart_port        port;
+        unsigned int            old_status;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	int			tx_done;
+	int			tx_count;
+	struct circ_buf		rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int			rx_dma_nrows;
+	unsigned int		tx_dma_channel;
+	unsigned int		rx_dma_channel;
+	struct work_struct	tx_dma_workqueue;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	struct timer_list 	cts_timer;
+	int		cts_pin;
+	int 		rts_pin;
+#endif
+};
+
+struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+struct bfin_serial_res {
+	unsigned long	uart_base_addr;
+	int		uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	unsigned int	uart_tx_dma_channel;
+	unsigned int	uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	int	uart_cts_pin;
+	int	uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+	0xFFC00400,
+	IRQ_UART0_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART0_TX,
+	CH_UART0_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	CONFIG_UART0_CTS_PIN,
+	CONFIG_UART0_RTS_PIN,
+#endif
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+	0xFFC02000,
+	IRQ_UART1_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART1_TX,
+	CH_UART1_RX,
+#endif
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	{
+	0xFFC02100,
+	IRQ_UART2_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART2_TX,
+	CH_UART2_RX,
+#endif
+#ifdef CONFIG_BFIN_UART2_CTSRTS
+	CONFIG_UART2_CTS_PIN,
+	CONFIG_UART2_RTS_PIN,
+#endif
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	{
+	0xFFC03100,
+	IRQ_UART3_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART3_TX,
+	CH_UART3_RX,
+#endif
+	},
+#endif
+};
+
+int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+
+#define DRIVER_NAME "bfin-uart"
+
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	peripheral_request(P_UART1_TX, DRIVER_NAME);
+	peripheral_request(P_UART1_RX, DRIVER_NAME);
+
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	peripheral_request(P_UART1_RTS, DRIVER_NAME);
+	peripheral_request(P_UART1_CTS, DRIVER_NAME);
+#endif
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	peripheral_request(P_UART2_TX, DRIVER_NAME);
+	peripheral_request(P_UART2_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	peripheral_request(P_UART3_TX, DRIVER_NAME);
+	peripheral_request(P_UART3_RX, DRIVER_NAME);
+
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	peripheral_request(P_UART3_RTS, DRIVER_NAME);
+	peripheral_request(P_UART3_CTS, DRIVER_NAME);
+#endif
+#endif
+	SSYNC();
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	if (uart->cts_pin >= 0) {
+		gpio_request(uart->cts_pin, DRIVER_NAME);
+		gpio_direction_input(uart->cts_pin);
+	}
+
+	if (uart->rts_pin >= 0) {
+		gpio_request(uart->rts_pin, DRIVER_NAME);
+		gpio_direction_output(uart->rts_pin, 0);
+	}
+#endif
+}
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_sir.h b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h
new file mode 100644
index 00000000000..c41f9cf0026
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h
@@ -0,0 +1,166 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER_SET)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_LSR(port)    bfin_read16((port)->membase + OFFSET_LSR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_SET_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER_SET), v)
+#define SIR_UART_CLEAR_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LSR(port, v)  bfin_write16(((port)->membase + OFFSET_LSR), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_CLEAR_LSR(port)  bfin_write16(((port)->membase + OFFSET_LSR), -1)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART0_RX,
+	CH_UART0_RX,
+	CH_UART0_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+	0xFFC02000,
+	IRQ_UART1_RX,
+	CH_UART1_RX,
+	CH_UART1_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR2
+	{
+	0xFFC02100,
+	IRQ_UART2_RX,
+	CH_UART2_RX,
+	CH_UART2_TX,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR3
+	{
+	0xFFC03100,
+	IRQ_UART3_RX,
+	CH_UART3_RX,
+	CH_UART3_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR1
+	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR2
+	ret = peripheral_request(P_UART2_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART2_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR3
+	ret = peripheral_request(P_UART3_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART3_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
new file mode 100644
index 00000000000..d6ee74ac046
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -0,0 +1,190 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF548_FAMILY
+
+#include "bf548.h"
+#include "mem_map.h"
+#include "anomaly.h"
+
+#ifdef CONFIG_BF542
+#include "defBF542.h"
+#endif
+
+#ifdef CONFIG_BF544
+#include "defBF544.h"
+#endif
+
+#ifdef CONFIG_BF547
+#include "defBF547.h"
+#endif
+
+#ifdef CONFIG_BF548
+#include "defBF548.h"
+#endif
+
+#ifdef CONFIG_BF549
+#include "defBF549.h"
+#endif
+
+#if !defined(__ASSEMBLY__)
+#ifdef CONFIG_BF542
+#include "cdefBF542.h"
+#endif
+#ifdef CONFIG_BF544
+#include "cdefBF544.h"
+#endif
+#ifdef CONFIG_BF547
+#include "cdefBF547.h"
+#endif
+#ifdef CONFIG_BF548
+#include "cdefBF548.h"
+#endif
+#ifdef CONFIG_BF549
+#include "cdefBF549.h"
+#endif
+
+/* UART 1*/
+#define bfin_read_UART_THR()		bfin_read_UART1_THR()
+#define bfin_write_UART_THR(val)	bfin_write_UART1_THR(val)
+#define bfin_read_UART_RBR()		bfin_read_UART1_RBR()
+#define bfin_write_UART_RBR(val)	bfin_write_UART1_RBR(val)
+#define bfin_read_UART_DLL()		bfin_read_UART1_DLL()
+#define bfin_write_UART_DLL(val)	bfin_write_UART1_DLL(val)
+#define bfin_read_UART_IER()		bfin_read_UART1_IER()
+#define bfin_write_UART_IER(val)	bfin_write_UART1_IER(val)
+#define bfin_read_UART_DLH()		bfin_read_UART1_DLH()
+#define bfin_write_UART_DLH(val)	bfin_write_UART1_DLH(val)
+#define bfin_read_UART_IIR()		bfin_read_UART1_IIR()
+#define bfin_write_UART_IIR(val)	bfin_write_UART1_IIR(val)
+#define bfin_read_UART_LCR()		bfin_read_UART1_LCR()
+#define bfin_write_UART_LCR(val)	bfin_write_UART1_LCR(val)
+#define bfin_read_UART_MCR()		bfin_read_UART1_MCR()
+#define bfin_write_UART_MCR(val)	bfin_write_UART1_MCR(val)
+#define bfin_read_UART_LSR()		bfin_read_UART1_LSR()
+#define bfin_write_UART_LSR(val)	bfin_write_UART1_LSR(val)
+#define bfin_read_UART_SCR()		bfin_read_UART1_SCR()
+#define bfin_write_UART_SCR(val)	bfin_write_UART1_SCR(val)
+#define bfin_read_UART_GCTL()		bfin_read_UART1_GCTL()
+#define bfin_write_UART_GCTL(val)	bfin_write_UART1_GCTL(val)
+
+#endif
+
+/* MAP used DEFINES from BF533 to BF54x - so we don't need to change 
+ * them in the driver, kernel, etc. */
+
+/* UART_IIR Register */
+#define STATUS(x)	((x << 1) & 0x06)
+#define STATUS_P1	0x02
+#define STATUS_P0	0x01
+
+/* UART 0*/
+
+/* DMA Channnel */
+#define bfin_read_CH_UART_RX()		bfin_read_CH_UART1_RX()
+#define bfin_write_CH_UART_RX(val)	bfin_write_CH_UART1_RX(val)
+#define bfin_read_CH_UART_TX()		bfin_read_CH_UART1_TX()
+#define bfin_write_CH_UART_TX(val)	bfin_write_CH_UART1_TX(val)
+#define CH_UART_RX			CH_UART1_RX
+#define CH_UART_TX			CH_UART1_TX
+
+/* System Interrupt Controller */
+#define bfin_read_IRQ_UART_RX()		bfin_read_IRQ_UART1_RX()
+#define bfin_write_IRQ_UART_RX(val)	bfin_write_IRQ_UART1_RX(val)
+#define bfin_read_IRQ_UART_TX()		bfin_read_IRQ_UART1_TX()
+#define bfin_write_IRQ_UART_TX(val)	bfin_write_IRQ_UART1_TX(val)
+#define bfin_read_IRQ_UART_ERROR()	bfin_read_IRQ_UART1_ERROR()
+#define bfin_write_IRQ_UART_ERROR(val)	bfin_write_IRQ_UART1_ERROR(val)
+#define IRQ_UART_RX			IRQ_UART1_RX
+#define	IRQ_UART_TX			IRQ_UART1_TX
+#define	IRQ_UART_ERROR			IRQ_UART1_ERROR
+
+/* MMR Registers*/
+#define bfin_read_UART_THR()		bfin_read_UART1_THR()
+#define bfin_write_UART_THR(val)	bfin_write_UART1_THR(val)
+#define bfin_read_UART_RBR()		bfin_read_UART1_RBR()
+#define bfin_write_UART_RBR(val)	bfin_write_UART1_RBR(val)
+#define bfin_read_UART_DLL()		bfin_read_UART1_DLL()
+#define bfin_write_UART_DLL(val)	bfin_write_UART1_DLL(val)
+#define bfin_read_UART_IER()		bfin_read_UART1_IER()
+#define bfin_write_UART_IER(val)	bfin_write_UART1_IER(val)
+#define bfin_read_UART_DLH()		bfin_read_UART1_DLH()
+#define bfin_write_UART_DLH(val)	bfin_write_UART1_DLH(val)
+#define bfin_read_UART_IIR()		bfin_read_UART1_IIR()
+#define bfin_write_UART_IIR(val)	bfin_write_UART1_IIR(val)
+#define bfin_read_UART_LCR()		bfin_read_UART1_LCR()
+#define bfin_write_UART_LCR(val)	bfin_write_UART1_LCR(val)
+#define bfin_read_UART_MCR()		bfin_read_UART1_MCR()
+#define bfin_write_UART_MCR(val)	bfin_write_UART1_MCR(val)
+#define bfin_read_UART_LSR()		bfin_read_UART1_LSR()
+#define bfin_write_UART_LSR(val)	bfin_write_UART1_LSR(val)
+#define bfin_read_UART_SCR()		bfin_read_UART1_SCR()
+#define bfin_write_UART_SCR(val)	bfin_write_UART1_SCR(val)
+#define bfin_read_UART_GCTL()		bfin_read_UART1_GCTL()
+#define bfin_write_UART_GCTL(val)	bfin_write_UART1_GCTL(val)
+
+#define BFIN_UART_THR			UART1_THR
+#define BFIN_UART_RBR			UART1_RBR
+#define BFIN_UART_DLL			UART1_DLL
+#define BFIN_UART_IER			UART1_IER
+#define BFIN_UART_DLH			UART1_DLH
+#define BFIN_UART_IIR			UART1_IIR
+#define BFIN_UART_LCR			UART1_LCR
+#define BFIN_UART_MCR			UART1_MCR
+#define BFIN_UART_LSR			UART1_LSR
+#define BFIN_UART_SCR			UART1_SCR
+#define BFIN_UART_GCTL			UART1_GCTL
+
+#define BFIN_UART_NR_PORTS	4
+
+#define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
+#define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
+#define OFFSET_GCTL             0x08	/* Global Control Register              */
+#define OFFSET_LCR              0x0C	/* Line Control Register                */
+#define OFFSET_MCR              0x10	/* Modem Control Register               */
+#define OFFSET_LSR              0x14	/* Line Status Register                 */
+#define OFFSET_MSR              0x18	/* Modem Status Register                */
+#define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
+#define OFFSET_IER_SET          0x20	/* Set Interrupt Enable Register        */
+#define OFFSET_IER_CLEAR        0x24	/* Clear Interrupt Enable Register      */
+#define OFFSET_THR              0x28	/* Transmit Holding register            */
+#define OFFSET_RBR              0x2C	/* Receive Buffer register              */
+
+/* PLL_DIV Masks */
+#define CCLK_DIV1 CSEL_DIV1	/* CCLK = VCO / 1 */
+#define CCLK_DIV2 CSEL_DIV2	/* CCLK = VCO / 2 */
+#define CCLK_DIV4 CSEL_DIV4	/* CCLK = VCO / 4 */
+#define CCLK_DIV8 CSEL_DIV8	/* CCLK = VCO / 8 */
+
+#endif
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
new file mode 100644
index 00000000000..07aefb9ed79
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
@@ -0,0 +1,590 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/cdefBF542.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF542_H
+#define _CDEF_BF542_H
+
+/* include all Core registers and bit definitions */
+#include "defBF542.h"
+
+/* include core sbfin_read_()ecific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF542 that are not in the common header */
+
+/* ATAPI Registers */
+
+#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
+#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
+#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
+#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
+#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
+#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
+#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
+#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
+#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
+#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
+#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
+#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
+#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
+#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
+#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
+#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
+#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
+#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
+#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
+#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
+#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
+#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
+#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
+#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
+#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
+#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
+#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
+#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
+#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
+#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
+#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
+#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
+#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
+#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
+#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
+#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
+#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
+#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
+#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
+#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
+#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
+#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
+#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
+#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
+
+/* SDH Registers */
+
+#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
+#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
+#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
+#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
+#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
+#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
+#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
+#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
+#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
+#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
+#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
+#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
+#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
+#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
+#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
+#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
+#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
+#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
+#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
+#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
+#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
+#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
+#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
+#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
+#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
+#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
+#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
+#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
+#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
+#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
+#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
+#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
+#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
+#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
+#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
+#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
+#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
+#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
+#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
+#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
+#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
+#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
+#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
+#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
+#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
+#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
+#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
+#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
+#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
+#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
+#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
+#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
+#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
+#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
+#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
+#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
+#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
+#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
+#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
+#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
+#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
+#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)	bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endbfin_read_()oint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
+#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endbfin_read_()oint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+/* Keybfin_read_()ad Registers */
+
+#define bfin_read_KPAD_CTL()			bfin_read16(KPAD_CTL)
+#define bfin_write_KPAD_CTL(val)		bfin_write16(KPAD_CTL, val)
+#define bfin_read_KPAD_PRESCALE()		bfin_read16(KPAD_PRESCALE)
+#define bfin_write_KPAD_PRESCALE(val)		bfin_write16(KPAD_PRESCALE, val)
+#define bfin_read_KPAD_MSEL()			bfin_read16(KPAD_MSEL)
+#define bfin_write_KPAD_MSEL(val)		bfin_write16(KPAD_MSEL, val)
+#define bfin_read_KPAD_ROWCOL()			bfin_read16(KPAD_ROWCOL)
+#define bfin_write_KPAD_ROWCOL(val)		bfin_write16(KPAD_ROWCOL, val)
+#define bfin_read_KPAD_STAT()			bfin_read16(KPAD_STAT)
+#define bfin_write_KPAD_STAT(val)		bfin_write16(KPAD_STAT, val)
+#define bfin_read_KPAD_SOFTEVAL()		bfin_read16(KPAD_SOFTEVAL)
+#define bfin_write_KPAD_SOFTEVAL(val)		bfin_write16(KPAD_SOFTEVAL, val)
+
+#endif /* _CDEF_BF542_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
new file mode 100644
index 00000000000..431a6927899
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
@@ -0,0 +1,945 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/cdefBF544.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF544_H
+#define _CDEF_BF544_H
+
+/* include all Core registers and bit definitions */
+#include "defBF544.h"
+
+/* include core sbfin_read_()ecific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF544 that are not in the common header */
+
+/* Timer Registers */
+
+#define bfin_read_TIMER8_CONFIG()		bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)		bfin_write16(TIMER8_CONFIG, val)
+#define bfin_read_TIMER8_COUNTER()		bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)		bfin_write32(TIMER8_COUNTER, val)
+#define bfin_read_TIMER8_PERIOD()		bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)		bfin_write32(TIMER8_PERIOD, val)
+#define bfin_read_TIMER8_WIDTH()		bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)		bfin_write32(TIMER8_WIDTH, val)
+#define bfin_read_TIMER9_CONFIG()		bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)		bfin_write16(TIMER9_CONFIG, val)
+#define bfin_read_TIMER9_COUNTER()		bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)		bfin_write32(TIMER9_COUNTER, val)
+#define bfin_read_TIMER9_PERIOD()		bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)		bfin_write32(TIMER9_PERIOD, val)
+#define bfin_read_TIMER9_WIDTH()		bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)		bfin_write32(TIMER9_WIDTH, val)
+#define bfin_read_TIMER10_CONFIG()		bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)		bfin_write16(TIMER10_CONFIG, val)
+#define bfin_read_TIMER10_COUNTER()		bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)		bfin_write32(TIMER10_COUNTER, val)
+#define bfin_read_TIMER10_PERIOD()		bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)		bfin_write32(TIMER10_PERIOD, val)
+#define bfin_read_TIMER10_WIDTH()		bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)		bfin_write32(TIMER10_WIDTH, val)
+
+/* Timer Groubfin_read_() of 3 */
+
+#define bfin_read_TIMER_ENABLE1()		bfin_read16(TIMER_ENABLE1)
+#define bfin_write_TIMER_ENABLE1(val)		bfin_write16(TIMER_ENABLE1, val)
+#define bfin_read_TIMER_DISABLE1()		bfin_read16(TIMER_DISABLE1)
+#define bfin_write_TIMER_DISABLE1(val)		bfin_write16(TIMER_DISABLE1, val)
+#define bfin_read_TIMER_STATUS1()		bfin_read32(TIMER_STATUS1)
+#define bfin_write_TIMER_STATUS1(val)		bfin_write32(TIMER_STATUS1, val)
+
+/* EPPI0 Registers */
+
+#define bfin_read_EPPI0_STATUS()		bfin_read16(EPPI0_STATUS)
+#define bfin_write_EPPI0_STATUS(val)		bfin_write16(EPPI0_STATUS, val)
+#define bfin_read_EPPI0_HCOUNT()		bfin_read16(EPPI0_HCOUNT)
+#define bfin_write_EPPI0_HCOUNT(val)		bfin_write16(EPPI0_HCOUNT, val)
+#define bfin_read_EPPI0_HDELAY()		bfin_read16(EPPI0_HDELAY)
+#define bfin_write_EPPI0_HDELAY(val)		bfin_write16(EPPI0_HDELAY, val)
+#define bfin_read_EPPI0_VCOUNT()		bfin_read16(EPPI0_VCOUNT)
+#define bfin_write_EPPI0_VCOUNT(val)		bfin_write16(EPPI0_VCOUNT, val)
+#define bfin_read_EPPI0_VDELAY()		bfin_read16(EPPI0_VDELAY)
+#define bfin_write_EPPI0_VDELAY(val)		bfin_write16(EPPI0_VDELAY, val)
+#define bfin_read_EPPI0_FRAME()			bfin_read16(EPPI0_FRAME)
+#define bfin_write_EPPI0_FRAME(val)		bfin_write16(EPPI0_FRAME, val)
+#define bfin_read_EPPI0_LINE()			bfin_read16(EPPI0_LINE)
+#define bfin_write_EPPI0_LINE(val)		bfin_write16(EPPI0_LINE, val)
+#define bfin_read_EPPI0_CLKDIV()		bfin_read16(EPPI0_CLKDIV)
+#define bfin_write_EPPI0_CLKDIV(val)		bfin_write16(EPPI0_CLKDIV, val)
+#define bfin_read_EPPI0_CONTROL()		bfin_read32(EPPI0_CONTROL)
+#define bfin_write_EPPI0_CONTROL(val)		bfin_write32(EPPI0_CONTROL, val)
+#define bfin_read_EPPI0_FS1W_HBL()		bfin_read32(EPPI0_FS1W_HBL)
+#define bfin_write_EPPI0_FS1W_HBL(val)		bfin_write32(EPPI0_FS1W_HBL, val)
+#define bfin_read_EPPI0_FS1P_AVPL()		bfin_read32(EPPI0_FS1P_AVPL)
+#define bfin_write_EPPI0_FS1P_AVPL(val)		bfin_write32(EPPI0_FS1P_AVPL, val)
+#define bfin_read_EPPI0_FS2W_LVB()		bfin_read32(EPPI0_FS2W_LVB)
+#define bfin_write_EPPI0_FS2W_LVB(val)		bfin_write32(EPPI0_FS2W_LVB, val)
+#define bfin_read_EPPI0_FS2P_LAVF()		bfin_read32(EPPI0_FS2P_LAVF)
+#define bfin_write_EPPI0_FS2P_LAVF(val)		bfin_write32(EPPI0_FS2P_LAVF, val)
+#define bfin_read_EPPI0_CLIP()			bfin_read32(EPPI0_CLIP)
+#define bfin_write_EPPI0_CLIP(val)		bfin_write32(EPPI0_CLIP, val)
+
+/* Two Wire Interface Registers (TWI1) */
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define bfin_read_CAN1_MC1()		bfin_read16(CAN1_MC1)
+#define bfin_write_CAN1_MC1(val)	bfin_write16(CAN1_MC1, val)
+#define bfin_read_CAN1_MD1()		bfin_read16(CAN1_MD1)
+#define bfin_write_CAN1_MD1(val)	bfin_write16(CAN1_MD1, val)
+#define bfin_read_CAN1_TRS1()		bfin_read16(CAN1_TRS1)
+#define bfin_write_CAN1_TRS1(val)	bfin_write16(CAN1_TRS1, val)
+#define bfin_read_CAN1_TRR1()		bfin_read16(CAN1_TRR1)
+#define bfin_write_CAN1_TRR1(val)	bfin_write16(CAN1_TRR1, val)
+#define bfin_read_CAN1_TA1()		bfin_read16(CAN1_TA1)
+#define bfin_write_CAN1_TA1(val)	bfin_write16(CAN1_TA1, val)
+#define bfin_read_CAN1_AA1()		bfin_read16(CAN1_AA1)
+#define bfin_write_CAN1_AA1(val)	bfin_write16(CAN1_AA1, val)
+#define bfin_read_CAN1_RMP1()		bfin_read16(CAN1_RMP1)
+#define bfin_write_CAN1_RMP1(val)	bfin_write16(CAN1_RMP1, val)
+#define bfin_read_CAN1_RML1()		bfin_read16(CAN1_RML1)
+#define bfin_write_CAN1_RML1(val)	bfin_write16(CAN1_RML1, val)
+#define bfin_read_CAN1_MBTIF1()		bfin_read16(CAN1_MBTIF1)
+#define bfin_write_CAN1_MBTIF1(val)	bfin_write16(CAN1_MBTIF1, val)
+#define bfin_read_CAN1_MBRIF1()		bfin_read16(CAN1_MBRIF1)
+#define bfin_write_CAN1_MBRIF1(val)	bfin_write16(CAN1_MBRIF1, val)
+#define bfin_read_CAN1_MBIM1()		bfin_read16(CAN1_MBIM1)
+#define bfin_write_CAN1_MBIM1(val)	bfin_write16(CAN1_MBIM1, val)
+#define bfin_read_CAN1_RFH1()		bfin_read16(CAN1_RFH1)
+#define bfin_write_CAN1_RFH1(val)	bfin_write16(CAN1_RFH1, val)
+#define bfin_read_CAN1_OPSS1()		bfin_read16(CAN1_OPSS1)
+#define bfin_write_CAN1_OPSS1(val)	bfin_write16(CAN1_OPSS1, val)
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define bfin_read_CAN1_MC2()		bfin_read16(CAN1_MC2)
+#define bfin_write_CAN1_MC2(val)	bfin_write16(CAN1_MC2, val)
+#define bfin_read_CAN1_MD2()		bfin_read16(CAN1_MD2)
+#define bfin_write_CAN1_MD2(val)	bfin_write16(CAN1_MD2, val)
+#define bfin_read_CAN1_TRS2()		bfin_read16(CAN1_TRS2)
+#define bfin_write_CAN1_TRS2(val)	bfin_write16(CAN1_TRS2, val)
+#define bfin_read_CAN1_TRR2()		bfin_read16(CAN1_TRR2)
+#define bfin_write_CAN1_TRR2(val)	bfin_write16(CAN1_TRR2, val)
+#define bfin_read_CAN1_TA2()		bfin_read16(CAN1_TA2)
+#define bfin_write_CAN1_TA2(val)	bfin_write16(CAN1_TA2, val)
+#define bfin_read_CAN1_AA2()		bfin_read16(CAN1_AA2)
+#define bfin_write_CAN1_AA2(val)	bfin_write16(CAN1_AA2, val)
+#define bfin_read_CAN1_RMP2()		bfin_read16(CAN1_RMP2)
+#define bfin_write_CAN1_RMP2(val)	bfin_write16(CAN1_RMP2, val)
+#define bfin_read_CAN1_RML2()		bfin_read16(CAN1_RML2)
+#define bfin_write_CAN1_RML2(val)	bfin_write16(CAN1_RML2, val)
+#define bfin_read_CAN1_MBTIF2()		bfin_read16(CAN1_MBTIF2)
+#define bfin_write_CAN1_MBTIF2(val)	bfin_write16(CAN1_MBTIF2, val)
+#define bfin_read_CAN1_MBRIF2()		bfin_read16(CAN1_MBRIF2)
+#define bfin_write_CAN1_MBRIF2(val)	bfin_write16(CAN1_MBRIF2, val)
+#define bfin_read_CAN1_MBIM2()		bfin_read16(CAN1_MBIM2)
+#define bfin_write_CAN1_MBIM2(val)	bfin_write16(CAN1_MBIM2, val)
+#define bfin_read_CAN1_RFH2()		bfin_read16(CAN1_RFH2)
+#define bfin_write_CAN1_RFH2(val)	bfin_write16(CAN1_RFH2, val)
+#define bfin_read_CAN1_OPSS2()		bfin_read16(CAN1_OPSS2)
+#define bfin_write_CAN1_OPSS2(val)	bfin_write16(CAN1_OPSS2, val)
+
+/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */
+
+#define bfin_read_CAN1_CLOCK()		bfin_read16(CAN1_CLOCK)
+#define bfin_write_CAN1_CLOCK(val)	bfin_write16(CAN1_CLOCK, val)
+#define bfin_read_CAN1_TIMING()		bfin_read16(CAN1_TIMING)
+#define bfin_write_CAN1_TIMING(val)	bfin_write16(CAN1_TIMING, val)
+#define bfin_read_CAN1_DEBUG()		bfin_read16(CAN1_DEBUG)
+#define bfin_write_CAN1_DEBUG(val)	bfin_write16(CAN1_DEBUG, val)
+#define bfin_read_CAN1_STATUS()		bfin_read16(CAN1_STATUS)
+#define bfin_write_CAN1_STATUS(val)	bfin_write16(CAN1_STATUS, val)
+#define bfin_read_CAN1_CEC()		bfin_read16(CAN1_CEC)
+#define bfin_write_CAN1_CEC(val)	bfin_write16(CAN1_CEC, val)
+#define bfin_read_CAN1_GIS()		bfin_read16(CAN1_GIS)
+#define bfin_write_CAN1_GIS(val)	bfin_write16(CAN1_GIS, val)
+#define bfin_read_CAN1_GIM()		bfin_read16(CAN1_GIM)
+#define bfin_write_CAN1_GIM(val)	bfin_write16(CAN1_GIM, val)
+#define bfin_read_CAN1_GIF()		bfin_read16(CAN1_GIF)
+#define bfin_write_CAN1_GIF(val)	bfin_write16(CAN1_GIF, val)
+#define bfin_read_CAN1_CONTROL()	bfin_read16(CAN1_CONTROL)
+#define bfin_write_CAN1_CONTROL(val)	bfin_write16(CAN1_CONTROL, val)
+#define bfin_read_CAN1_INTR()		bfin_read16(CAN1_INTR)
+#define bfin_write_CAN1_INTR(val)	bfin_write16(CAN1_INTR, val)
+#define bfin_read_CAN1_MBTD()		bfin_read16(CAN1_MBTD)
+#define bfin_write_CAN1_MBTD(val)	bfin_write16(CAN1_MBTD, val)
+#define bfin_read_CAN1_EWR()		bfin_read16(CAN1_EWR)
+#define bfin_write_CAN1_EWR(val)	bfin_write16(CAN1_EWR, val)
+#define bfin_read_CAN1_ESR()		bfin_read16(CAN1_ESR)
+#define bfin_write_CAN1_ESR(val)	bfin_write16(CAN1_ESR, val)
+#define bfin_read_CAN1_UCCNT()		bfin_read16(CAN1_UCCNT)
+#define bfin_write_CAN1_UCCNT(val)	bfin_write16(CAN1_UCCNT, val)
+#define bfin_read_CAN1_UCRC()		bfin_read16(CAN1_UCRC)
+#define bfin_write_CAN1_UCRC(val)	bfin_write16(CAN1_UCRC, val)
+#define bfin_read_CAN1_UCCNF()		bfin_read16(CAN1_UCCNF)
+#define bfin_write_CAN1_UCCNF(val)	bfin_write16(CAN1_UCCNF, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM00L()		bfin_read16(CAN1_AM00L)
+#define bfin_write_CAN1_AM00L(val)	bfin_write16(CAN1_AM00L, val)
+#define bfin_read_CAN1_AM00H()		bfin_read16(CAN1_AM00H)
+#define bfin_write_CAN1_AM00H(val)	bfin_write16(CAN1_AM00H, val)
+#define bfin_read_CAN1_AM01L()		bfin_read16(CAN1_AM01L)
+#define bfin_write_CAN1_AM01L(val)	bfin_write16(CAN1_AM01L, val)
+#define bfin_read_CAN1_AM01H()		bfin_read16(CAN1_AM01H)
+#define bfin_write_CAN1_AM01H(val)	bfin_write16(CAN1_AM01H, val)
+#define bfin_read_CAN1_AM02L()		bfin_read16(CAN1_AM02L)
+#define bfin_write_CAN1_AM02L(val)	bfin_write16(CAN1_AM02L, val)
+#define bfin_read_CAN1_AM02H()		bfin_read16(CAN1_AM02H)
+#define bfin_write_CAN1_AM02H(val)	bfin_write16(CAN1_AM02H, val)
+#define bfin_read_CAN1_AM03L()		bfin_read16(CAN1_AM03L)
+#define bfin_write_CAN1_AM03L(val)	bfin_write16(CAN1_AM03L, val)
+#define bfin_read_CAN1_AM03H()		bfin_read16(CAN1_AM03H)
+#define bfin_write_CAN1_AM03H(val)	bfin_write16(CAN1_AM03H, val)
+#define bfin_read_CAN1_AM04L()		bfin_read16(CAN1_AM04L)
+#define bfin_write_CAN1_AM04L(val)	bfin_write16(CAN1_AM04L, val)
+#define bfin_read_CAN1_AM04H()		bfin_read16(CAN1_AM04H)
+#define bfin_write_CAN1_AM04H(val)	bfin_write16(CAN1_AM04H, val)
+#define bfin_read_CAN1_AM05L()		bfin_read16(CAN1_AM05L)
+#define bfin_write_CAN1_AM05L(val)	bfin_write16(CAN1_AM05L, val)
+#define bfin_read_CAN1_AM05H()		bfin_read16(CAN1_AM05H)
+#define bfin_write_CAN1_AM05H(val)	bfin_write16(CAN1_AM05H, val)
+#define bfin_read_CAN1_AM06L()		bfin_read16(CAN1_AM06L)
+#define bfin_write_CAN1_AM06L(val)	bfin_write16(CAN1_AM06L, val)
+#define bfin_read_CAN1_AM06H()		bfin_read16(CAN1_AM06H)
+#define bfin_write_CAN1_AM06H(val)	bfin_write16(CAN1_AM06H, val)
+#define bfin_read_CAN1_AM07L()		bfin_read16(CAN1_AM07L)
+#define bfin_write_CAN1_AM07L(val)	bfin_write16(CAN1_AM07L, val)
+#define bfin_read_CAN1_AM07H()		bfin_read16(CAN1_AM07H)
+#define bfin_write_CAN1_AM07H(val)	bfin_write16(CAN1_AM07H, val)
+#define bfin_read_CAN1_AM08L()		bfin_read16(CAN1_AM08L)
+#define bfin_write_CAN1_AM08L(val)	bfin_write16(CAN1_AM08L, val)
+#define bfin_read_CAN1_AM08H()		bfin_read16(CAN1_AM08H)
+#define bfin_write_CAN1_AM08H(val)	bfin_write16(CAN1_AM08H, val)
+#define bfin_read_CAN1_AM09L()		bfin_read16(CAN1_AM09L)
+#define bfin_write_CAN1_AM09L(val)	bfin_write16(CAN1_AM09L, val)
+#define bfin_read_CAN1_AM09H()		bfin_read16(CAN1_AM09H)
+#define bfin_write_CAN1_AM09H(val)	bfin_write16(CAN1_AM09H, val)
+#define bfin_read_CAN1_AM10L()		bfin_read16(CAN1_AM10L)
+#define bfin_write_CAN1_AM10L(val)	bfin_write16(CAN1_AM10L, val)
+#define bfin_read_CAN1_AM10H()		bfin_read16(CAN1_AM10H)
+#define bfin_write_CAN1_AM10H(val)	bfin_write16(CAN1_AM10H, val)
+#define bfin_read_CAN1_AM11L()		bfin_read16(CAN1_AM11L)
+#define bfin_write_CAN1_AM11L(val)	bfin_write16(CAN1_AM11L, val)
+#define bfin_read_CAN1_AM11H()		bfin_read16(CAN1_AM11H)
+#define bfin_write_CAN1_AM11H(val)	bfin_write16(CAN1_AM11H, val)
+#define bfin_read_CAN1_AM12L()		bfin_read16(CAN1_AM12L)
+#define bfin_write_CAN1_AM12L(val)	bfin_write16(CAN1_AM12L, val)
+#define bfin_read_CAN1_AM12H()		bfin_read16(CAN1_AM12H)
+#define bfin_write_CAN1_AM12H(val)	bfin_write16(CAN1_AM12H, val)
+#define bfin_read_CAN1_AM13L()		bfin_read16(CAN1_AM13L)
+#define bfin_write_CAN1_AM13L(val)	bfin_write16(CAN1_AM13L, val)
+#define bfin_read_CAN1_AM13H()		bfin_read16(CAN1_AM13H)
+#define bfin_write_CAN1_AM13H(val)	bfin_write16(CAN1_AM13H, val)
+#define bfin_read_CAN1_AM14L()		bfin_read16(CAN1_AM14L)
+#define bfin_write_CAN1_AM14L(val)	bfin_write16(CAN1_AM14L, val)
+#define bfin_read_CAN1_AM14H()		bfin_read16(CAN1_AM14H)
+#define bfin_write_CAN1_AM14H(val)	bfin_write16(CAN1_AM14H, val)
+#define bfin_read_CAN1_AM15L()		bfin_read16(CAN1_AM15L)
+#define bfin_write_CAN1_AM15L(val)	bfin_write16(CAN1_AM15L, val)
+#define bfin_read_CAN1_AM15H()		bfin_read16(CAN1_AM15H)
+#define bfin_write_CAN1_AM15H(val)	bfin_write16(CAN1_AM15H, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM16L()		bfin_read16(CAN1_AM16L)
+#define bfin_write_CAN1_AM16L(val)	bfin_write16(CAN1_AM16L, val)
+#define bfin_read_CAN1_AM16H()		bfin_read16(CAN1_AM16H)
+#define bfin_write_CAN1_AM16H(val)	bfin_write16(CAN1_AM16H, val)
+#define bfin_read_CAN1_AM17L()		bfin_read16(CAN1_AM17L)
+#define bfin_write_CAN1_AM17L(val)	bfin_write16(CAN1_AM17L, val)
+#define bfin_read_CAN1_AM17H()		bfin_read16(CAN1_AM17H)
+#define bfin_write_CAN1_AM17H(val)	bfin_write16(CAN1_AM17H, val)
+#define bfin_read_CAN1_AM18L()		bfin_read16(CAN1_AM18L)
+#define bfin_write_CAN1_AM18L(val)	bfin_write16(CAN1_AM18L, val)
+#define bfin_read_CAN1_AM18H()		bfin_read16(CAN1_AM18H)
+#define bfin_write_CAN1_AM18H(val)	bfin_write16(CAN1_AM18H, val)
+#define bfin_read_CAN1_AM19L()		bfin_read16(CAN1_AM19L)
+#define bfin_write_CAN1_AM19L(val)	bfin_write16(CAN1_AM19L, val)
+#define bfin_read_CAN1_AM19H()		bfin_read16(CAN1_AM19H)
+#define bfin_write_CAN1_AM19H(val)	bfin_write16(CAN1_AM19H, val)
+#define bfin_read_CAN1_AM20L()		bfin_read16(CAN1_AM20L)
+#define bfin_write_CAN1_AM20L(val)	bfin_write16(CAN1_AM20L, val)
+#define bfin_read_CAN1_AM20H()		bfin_read16(CAN1_AM20H)
+#define bfin_write_CAN1_AM20H(val)	bfin_write16(CAN1_AM20H, val)
+#define bfin_read_CAN1_AM21L()		bfin_read16(CAN1_AM21L)
+#define bfin_write_CAN1_AM21L(val)	bfin_write16(CAN1_AM21L, val)
+#define bfin_read_CAN1_AM21H()		bfin_read16(CAN1_AM21H)
+#define bfin_write_CAN1_AM21H(val)	bfin_write16(CAN1_AM21H, val)
+#define bfin_read_CAN1_AM22L()		bfin_read16(CAN1_AM22L)
+#define bfin_write_CAN1_AM22L(val)	bfin_write16(CAN1_AM22L, val)
+#define bfin_read_CAN1_AM22H()		bfin_read16(CAN1_AM22H)
+#define bfin_write_CAN1_AM22H(val)	bfin_write16(CAN1_AM22H, val)
+#define bfin_read_CAN1_AM23L()		bfin_read16(CAN1_AM23L)
+#define bfin_write_CAN1_AM23L(val)	bfin_write16(CAN1_AM23L, val)
+#define bfin_read_CAN1_AM23H()		bfin_read16(CAN1_AM23H)
+#define bfin_write_CAN1_AM23H(val)	bfin_write16(CAN1_AM23H, val)
+#define bfin_read_CAN1_AM24L()		bfin_read16(CAN1_AM24L)
+#define bfin_write_CAN1_AM24L(val)	bfin_write16(CAN1_AM24L, val)
+#define bfin_read_CAN1_AM24H()		bfin_read16(CAN1_AM24H)
+#define bfin_write_CAN1_AM24H(val)	bfin_write16(CAN1_AM24H, val)
+#define bfin_read_CAN1_AM25L()		bfin_read16(CAN1_AM25L)
+#define bfin_write_CAN1_AM25L(val)	bfin_write16(CAN1_AM25L, val)
+#define bfin_read_CAN1_AM25H()		bfin_read16(CAN1_AM25H)
+#define bfin_write_CAN1_AM25H(val)	bfin_write16(CAN1_AM25H, val)
+#define bfin_read_CAN1_AM26L()		bfin_read16(CAN1_AM26L)
+#define bfin_write_CAN1_AM26L(val)	bfin_write16(CAN1_AM26L, val)
+#define bfin_read_CAN1_AM26H()		bfin_read16(CAN1_AM26H)
+#define bfin_write_CAN1_AM26H(val)	bfin_write16(CAN1_AM26H, val)
+#define bfin_read_CAN1_AM27L()		bfin_read16(CAN1_AM27L)
+#define bfin_write_CAN1_AM27L(val)	bfin_write16(CAN1_AM27L, val)
+#define bfin_read_CAN1_AM27H()		bfin_read16(CAN1_AM27H)
+#define bfin_write_CAN1_AM27H(val)	bfin_write16(CAN1_AM27H, val)
+#define bfin_read_CAN1_AM28L()		bfin_read16(CAN1_AM28L)
+#define bfin_write_CAN1_AM28L(val)	bfin_write16(CAN1_AM28L, val)
+#define bfin_read_CAN1_AM28H()		bfin_read16(CAN1_AM28H)
+#define bfin_write_CAN1_AM28H(val)	bfin_write16(CAN1_AM28H, val)
+#define bfin_read_CAN1_AM29L()		bfin_read16(CAN1_AM29L)
+#define bfin_write_CAN1_AM29L(val)	bfin_write16(CAN1_AM29L, val)
+#define bfin_read_CAN1_AM29H()		bfin_read16(CAN1_AM29H)
+#define bfin_write_CAN1_AM29H(val)	bfin_write16(CAN1_AM29H, val)
+#define bfin_read_CAN1_AM30L()		bfin_read16(CAN1_AM30L)
+#define bfin_write_CAN1_AM30L(val)	bfin_write16(CAN1_AM30L, val)
+#define bfin_read_CAN1_AM30H()		bfin_read16(CAN1_AM30H)
+#define bfin_write_CAN1_AM30H(val)	bfin_write16(CAN1_AM30H, val)
+#define bfin_read_CAN1_AM31L()		bfin_read16(CAN1_AM31L)
+#define bfin_write_CAN1_AM31L(val)	bfin_write16(CAN1_AM31L, val)
+#define bfin_read_CAN1_AM31H()		bfin_read16(CAN1_AM31H)
+#define bfin_write_CAN1_AM31H(val)	bfin_write16(CAN1_AM31H, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB00_DATA0()		bfin_read16(CAN1_MB00_DATA0)
+#define bfin_write_CAN1_MB00_DATA0(val)		bfin_write16(CAN1_MB00_DATA0, val)
+#define bfin_read_CAN1_MB00_DATA1()		bfin_read16(CAN1_MB00_DATA1)
+#define bfin_write_CAN1_MB00_DATA1(val)		bfin_write16(CAN1_MB00_DATA1, val)
+#define bfin_read_CAN1_MB00_DATA2()		bfin_read16(CAN1_MB00_DATA2)
+#define bfin_write_CAN1_MB00_DATA2(val)		bfin_write16(CAN1_MB00_DATA2, val)
+#define bfin_read_CAN1_MB00_DATA3()		bfin_read16(CAN1_MB00_DATA3)
+#define bfin_write_CAN1_MB00_DATA3(val)		bfin_write16(CAN1_MB00_DATA3, val)
+#define bfin_read_CAN1_MB00_LENGTH()		bfin_read16(CAN1_MB00_LENGTH)
+#define bfin_write_CAN1_MB00_LENGTH(val)	bfin_write16(CAN1_MB00_LENGTH, val)
+#define bfin_read_CAN1_MB00_TIMESTAMP()		bfin_read16(CAN1_MB00_TIMESTAMP)
+#define bfin_write_CAN1_MB00_TIMESTAMP(val)	bfin_write16(CAN1_MB00_TIMESTAMP, val)
+#define bfin_read_CAN1_MB00_ID0()		bfin_read16(CAN1_MB00_ID0)
+#define bfin_write_CAN1_MB00_ID0(val)		bfin_write16(CAN1_MB00_ID0, val)
+#define bfin_read_CAN1_MB00_ID1()		bfin_read16(CAN1_MB00_ID1)
+#define bfin_write_CAN1_MB00_ID1(val)		bfin_write16(CAN1_MB00_ID1, val)
+#define bfin_read_CAN1_MB01_DATA0()		bfin_read16(CAN1_MB01_DATA0)
+#define bfin_write_CAN1_MB01_DATA0(val)		bfin_write16(CAN1_MB01_DATA0, val)
+#define bfin_read_CAN1_MB01_DATA1()		bfin_read16(CAN1_MB01_DATA1)
+#define bfin_write_CAN1_MB01_DATA1(val)		bfin_write16(CAN1_MB01_DATA1, val)
+#define bfin_read_CAN1_MB01_DATA2()		bfin_read16(CAN1_MB01_DATA2)
+#define bfin_write_CAN1_MB01_DATA2(val)		bfin_write16(CAN1_MB01_DATA2, val)
+#define bfin_read_CAN1_MB01_DATA3()		bfin_read16(CAN1_MB01_DATA3)
+#define bfin_write_CAN1_MB01_DATA3(val)		bfin_write16(CAN1_MB01_DATA3, val)
+#define bfin_read_CAN1_MB01_LENGTH()		bfin_read16(CAN1_MB01_LENGTH)
+#define bfin_write_CAN1_MB01_LENGTH(val)	bfin_write16(CAN1_MB01_LENGTH, val)
+#define bfin_read_CAN1_MB01_TIMESTAMP()		bfin_read16(CAN1_MB01_TIMESTAMP)
+#define bfin_write_CAN1_MB01_TIMESTAMP(val)	bfin_write16(CAN1_MB01_TIMESTAMP, val)
+#define bfin_read_CAN1_MB01_ID0()		bfin_read16(CAN1_MB01_ID0)
+#define bfin_write_CAN1_MB01_ID0(val)		bfin_write16(CAN1_MB01_ID0, val)
+#define bfin_read_CAN1_MB01_ID1()		bfin_read16(CAN1_MB01_ID1)
+#define bfin_write_CAN1_MB01_ID1(val)		bfin_write16(CAN1_MB01_ID1, val)
+#define bfin_read_CAN1_MB02_DATA0()		bfin_read16(CAN1_MB02_DATA0)
+#define bfin_write_CAN1_MB02_DATA0(val)		bfin_write16(CAN1_MB02_DATA0, val)
+#define bfin_read_CAN1_MB02_DATA1()		bfin_read16(CAN1_MB02_DATA1)
+#define bfin_write_CAN1_MB02_DATA1(val)		bfin_write16(CAN1_MB02_DATA1, val)
+#define bfin_read_CAN1_MB02_DATA2()		bfin_read16(CAN1_MB02_DATA2)
+#define bfin_write_CAN1_MB02_DATA2(val)		bfin_write16(CAN1_MB02_DATA2, val)
+#define bfin_read_CAN1_MB02_DATA3()		bfin_read16(CAN1_MB02_DATA3)
+#define bfin_write_CAN1_MB02_DATA3(val)		bfin_write16(CAN1_MB02_DATA3, val)
+#define bfin_read_CAN1_MB02_LENGTH()		bfin_read16(CAN1_MB02_LENGTH)
+#define bfin_write_CAN1_MB02_LENGTH(val)	bfin_write16(CAN1_MB02_LENGTH, val)
+#define bfin_read_CAN1_MB02_TIMESTAMP()		bfin_read16(CAN1_MB02_TIMESTAMP)
+#define bfin_write_CAN1_MB02_TIMESTAMP(val)	bfin_write16(CAN1_MB02_TIMESTAMP, val)
+#define bfin_read_CAN1_MB02_ID0()		bfin_read16(CAN1_MB02_ID0)
+#define bfin_write_CAN1_MB02_ID0(val)		bfin_write16(CAN1_MB02_ID0, val)
+#define bfin_read_CAN1_MB02_ID1()		bfin_read16(CAN1_MB02_ID1)
+#define bfin_write_CAN1_MB02_ID1(val)		bfin_write16(CAN1_MB02_ID1, val)
+#define bfin_read_CAN1_MB03_DATA0()		bfin_read16(CAN1_MB03_DATA0)
+#define bfin_write_CAN1_MB03_DATA0(val)		bfin_write16(CAN1_MB03_DATA0, val)
+#define bfin_read_CAN1_MB03_DATA1()		bfin_read16(CAN1_MB03_DATA1)
+#define bfin_write_CAN1_MB03_DATA1(val)		bfin_write16(CAN1_MB03_DATA1, val)
+#define bfin_read_CAN1_MB03_DATA2()		bfin_read16(CAN1_MB03_DATA2)
+#define bfin_write_CAN1_MB03_DATA2(val)		bfin_write16(CAN1_MB03_DATA2, val)
+#define bfin_read_CAN1_MB03_DATA3()		bfin_read16(CAN1_MB03_DATA3)
+#define bfin_write_CAN1_MB03_DATA3(val)		bfin_write16(CAN1_MB03_DATA3, val)
+#define bfin_read_CAN1_MB03_LENGTH()		bfin_read16(CAN1_MB03_LENGTH)
+#define bfin_write_CAN1_MB03_LENGTH(val)	bfin_write16(CAN1_MB03_LENGTH, val)
+#define bfin_read_CAN1_MB03_TIMESTAMP()		bfin_read16(CAN1_MB03_TIMESTAMP)
+#define bfin_write_CAN1_MB03_TIMESTAMP(val)	bfin_write16(CAN1_MB03_TIMESTAMP, val)
+#define bfin_read_CAN1_MB03_ID0()		bfin_read16(CAN1_MB03_ID0)
+#define bfin_write_CAN1_MB03_ID0(val)		bfin_write16(CAN1_MB03_ID0, val)
+#define bfin_read_CAN1_MB03_ID1()		bfin_read16(CAN1_MB03_ID1)
+#define bfin_write_CAN1_MB03_ID1(val)		bfin_write16(CAN1_MB03_ID1, val)
+#define bfin_read_CAN1_MB04_DATA0()		bfin_read16(CAN1_MB04_DATA0)
+#define bfin_write_CAN1_MB04_DATA0(val)		bfin_write16(CAN1_MB04_DATA0, val)
+#define bfin_read_CAN1_MB04_DATA1()		bfin_read16(CAN1_MB04_DATA1)
+#define bfin_write_CAN1_MB04_DATA1(val)		bfin_write16(CAN1_MB04_DATA1, val)
+#define bfin_read_CAN1_MB04_DATA2()		bfin_read16(CAN1_MB04_DATA2)
+#define bfin_write_CAN1_MB04_DATA2(val)		bfin_write16(CAN1_MB04_DATA2, val)
+#define bfin_read_CAN1_MB04_DATA3()		bfin_read16(CAN1_MB04_DATA3)
+#define bfin_write_CAN1_MB04_DATA3(val)		bfin_write16(CAN1_MB04_DATA3, val)
+#define bfin_read_CAN1_MB04_LENGTH()		bfin_read16(CAN1_MB04_LENGTH)
+#define bfin_write_CAN1_MB04_LENGTH(val)	bfin_write16(CAN1_MB04_LENGTH, val)
+#define bfin_read_CAN1_MB04_TIMESTAMP()		bfin_read16(CAN1_MB04_TIMESTAMP)
+#define bfin_write_CAN1_MB04_TIMESTAMP(val)	bfin_write16(CAN1_MB04_TIMESTAMP, val)
+#define bfin_read_CAN1_MB04_ID0()		bfin_read16(CAN1_MB04_ID0)
+#define bfin_write_CAN1_MB04_ID0(val)		bfin_write16(CAN1_MB04_ID0, val)
+#define bfin_read_CAN1_MB04_ID1()		bfin_read16(CAN1_MB04_ID1)
+#define bfin_write_CAN1_MB04_ID1(val)		bfin_write16(CAN1_MB04_ID1, val)
+#define bfin_read_CAN1_MB05_DATA0()		bfin_read16(CAN1_MB05_DATA0)
+#define bfin_write_CAN1_MB05_DATA0(val)		bfin_write16(CAN1_MB05_DATA0, val)
+#define bfin_read_CAN1_MB05_DATA1()		bfin_read16(CAN1_MB05_DATA1)
+#define bfin_write_CAN1_MB05_DATA1(val)		bfin_write16(CAN1_MB05_DATA1, val)
+#define bfin_read_CAN1_MB05_DATA2()		bfin_read16(CAN1_MB05_DATA2)
+#define bfin_write_CAN1_MB05_DATA2(val)		bfin_write16(CAN1_MB05_DATA2, val)
+#define bfin_read_CAN1_MB05_DATA3()		bfin_read16(CAN1_MB05_DATA3)
+#define bfin_write_CAN1_MB05_DATA3(val)		bfin_write16(CAN1_MB05_DATA3, val)
+#define bfin_read_CAN1_MB05_LENGTH()		bfin_read16(CAN1_MB05_LENGTH)
+#define bfin_write_CAN1_MB05_LENGTH(val)	bfin_write16(CAN1_MB05_LENGTH, val)
+#define bfin_read_CAN1_MB05_TIMESTAMP()		bfin_read16(CAN1_MB05_TIMESTAMP)
+#define bfin_write_CAN1_MB05_TIMESTAMP(val)	bfin_write16(CAN1_MB05_TIMESTAMP, val)
+#define bfin_read_CAN1_MB05_ID0()		bfin_read16(CAN1_MB05_ID0)
+#define bfin_write_CAN1_MB05_ID0(val)		bfin_write16(CAN1_MB05_ID0, val)
+#define bfin_read_CAN1_MB05_ID1()		bfin_read16(CAN1_MB05_ID1)
+#define bfin_write_CAN1_MB05_ID1(val)		bfin_write16(CAN1_MB05_ID1, val)
+#define bfin_read_CAN1_MB06_DATA0()		bfin_read16(CAN1_MB06_DATA0)
+#define bfin_write_CAN1_MB06_DATA0(val)		bfin_write16(CAN1_MB06_DATA0, val)
+#define bfin_read_CAN1_MB06_DATA1()		bfin_read16(CAN1_MB06_DATA1)
+#define bfin_write_CAN1_MB06_DATA1(val)		bfin_write16(CAN1_MB06_DATA1, val)
+#define bfin_read_CAN1_MB06_DATA2()		bfin_read16(CAN1_MB06_DATA2)
+#define bfin_write_CAN1_MB06_DATA2(val)		bfin_write16(CAN1_MB06_DATA2, val)
+#define bfin_read_CAN1_MB06_DATA3()		bfin_read16(CAN1_MB06_DATA3)
+#define bfin_write_CAN1_MB06_DATA3(val)		bfin_write16(CAN1_MB06_DATA3, val)
+#define bfin_read_CAN1_MB06_LENGTH()		bfin_read16(CAN1_MB06_LENGTH)
+#define bfin_write_CAN1_MB06_LENGTH(val)	bfin_write16(CAN1_MB06_LENGTH, val)
+#define bfin_read_CAN1_MB06_TIMESTAMP()		bfin_read16(CAN1_MB06_TIMESTAMP)
+#define bfin_write_CAN1_MB06_TIMESTAMP(val)	bfin_write16(CAN1_MB06_TIMESTAMP, val)
+#define bfin_read_CAN1_MB06_ID0()		bfin_read16(CAN1_MB06_ID0)
+#define bfin_write_CAN1_MB06_ID0(val)		bfin_write16(CAN1_MB06_ID0, val)
+#define bfin_read_CAN1_MB06_ID1()		bfin_read16(CAN1_MB06_ID1)
+#define bfin_write_CAN1_MB06_ID1(val)		bfin_write16(CAN1_MB06_ID1, val)
+#define bfin_read_CAN1_MB07_DATA0()		bfin_read16(CAN1_MB07_DATA0)
+#define bfin_write_CAN1_MB07_DATA0(val)		bfin_write16(CAN1_MB07_DATA0, val)
+#define bfin_read_CAN1_MB07_DATA1()		bfin_read16(CAN1_MB07_DATA1)
+#define bfin_write_CAN1_MB07_DATA1(val)		bfin_write16(CAN1_MB07_DATA1, val)
+#define bfin_read_CAN1_MB07_DATA2()		bfin_read16(CAN1_MB07_DATA2)
+#define bfin_write_CAN1_MB07_DATA2(val)		bfin_write16(CAN1_MB07_DATA2, val)
+#define bfin_read_CAN1_MB07_DATA3()		bfin_read16(CAN1_MB07_DATA3)
+#define bfin_write_CAN1_MB07_DATA3(val)		bfin_write16(CAN1_MB07_DATA3, val)
+#define bfin_read_CAN1_MB07_LENGTH()		bfin_read16(CAN1_MB07_LENGTH)
+#define bfin_write_CAN1_MB07_LENGTH(val)	bfin_write16(CAN1_MB07_LENGTH, val)
+#define bfin_read_CAN1_MB07_TIMESTAMP()		bfin_read16(CAN1_MB07_TIMESTAMP)
+#define bfin_write_CAN1_MB07_TIMESTAMP(val)	bfin_write16(CAN1_MB07_TIMESTAMP, val)
+#define bfin_read_CAN1_MB07_ID0()		bfin_read16(CAN1_MB07_ID0)
+#define bfin_write_CAN1_MB07_ID0(val)		bfin_write16(CAN1_MB07_ID0, val)
+#define bfin_read_CAN1_MB07_ID1()		bfin_read16(CAN1_MB07_ID1)
+#define bfin_write_CAN1_MB07_ID1(val)		bfin_write16(CAN1_MB07_ID1, val)
+#define bfin_read_CAN1_MB08_DATA0()		bfin_read16(CAN1_MB08_DATA0)
+#define bfin_write_CAN1_MB08_DATA0(val)		bfin_write16(CAN1_MB08_DATA0, val)
+#define bfin_read_CAN1_MB08_DATA1()		bfin_read16(CAN1_MB08_DATA1)
+#define bfin_write_CAN1_MB08_DATA1(val)		bfin_write16(CAN1_MB08_DATA1, val)
+#define bfin_read_CAN1_MB08_DATA2()		bfin_read16(CAN1_MB08_DATA2)
+#define bfin_write_CAN1_MB08_DATA2(val)		bfin_write16(CAN1_MB08_DATA2, val)
+#define bfin_read_CAN1_MB08_DATA3()		bfin_read16(CAN1_MB08_DATA3)
+#define bfin_write_CAN1_MB08_DATA3(val)		bfin_write16(CAN1_MB08_DATA3, val)
+#define bfin_read_CAN1_MB08_LENGTH()		bfin_read16(CAN1_MB08_LENGTH)
+#define bfin_write_CAN1_MB08_LENGTH(val)	bfin_write16(CAN1_MB08_LENGTH, val)
+#define bfin_read_CAN1_MB08_TIMESTAMP()		bfin_read16(CAN1_MB08_TIMESTAMP)
+#define bfin_write_CAN1_MB08_TIMESTAMP(val)	bfin_write16(CAN1_MB08_TIMESTAMP, val)
+#define bfin_read_CAN1_MB08_ID0()		bfin_read16(CAN1_MB08_ID0)
+#define bfin_write_CAN1_MB08_ID0(val)		bfin_write16(CAN1_MB08_ID0, val)
+#define bfin_read_CAN1_MB08_ID1()		bfin_read16(CAN1_MB08_ID1)
+#define bfin_write_CAN1_MB08_ID1(val)		bfin_write16(CAN1_MB08_ID1, val)
+#define bfin_read_CAN1_MB09_DATA0()		bfin_read16(CAN1_MB09_DATA0)
+#define bfin_write_CAN1_MB09_DATA0(val)		bfin_write16(CAN1_MB09_DATA0, val)
+#define bfin_read_CAN1_MB09_DATA1()		bfin_read16(CAN1_MB09_DATA1)
+#define bfin_write_CAN1_MB09_DATA1(val)		bfin_write16(CAN1_MB09_DATA1, val)
+#define bfin_read_CAN1_MB09_DATA2()		bfin_read16(CAN1_MB09_DATA2)
+#define bfin_write_CAN1_MB09_DATA2(val)		bfin_write16(CAN1_MB09_DATA2, val)
+#define bfin_read_CAN1_MB09_DATA3()		bfin_read16(CAN1_MB09_DATA3)
+#define bfin_write_CAN1_MB09_DATA3(val)		bfin_write16(CAN1_MB09_DATA3, val)
+#define bfin_read_CAN1_MB09_LENGTH()		bfin_read16(CAN1_MB09_LENGTH)
+#define bfin_write_CAN1_MB09_LENGTH(val)	bfin_write16(CAN1_MB09_LENGTH, val)
+#define bfin_read_CAN1_MB09_TIMESTAMP()		bfin_read16(CAN1_MB09_TIMESTAMP)
+#define bfin_write_CAN1_MB09_TIMESTAMP(val)	bfin_write16(CAN1_MB09_TIMESTAMP, val)
+#define bfin_read_CAN1_MB09_ID0()		bfin_read16(CAN1_MB09_ID0)
+#define bfin_write_CAN1_MB09_ID0(val)		bfin_write16(CAN1_MB09_ID0, val)
+#define bfin_read_CAN1_MB09_ID1()		bfin_read16(CAN1_MB09_ID1)
+#define bfin_write_CAN1_MB09_ID1(val)		bfin_write16(CAN1_MB09_ID1, val)
+#define bfin_read_CAN1_MB10_DATA0()		bfin_read16(CAN1_MB10_DATA0)
+#define bfin_write_CAN1_MB10_DATA0(val)		bfin_write16(CAN1_MB10_DATA0, val)
+#define bfin_read_CAN1_MB10_DATA1()		bfin_read16(CAN1_MB10_DATA1)
+#define bfin_write_CAN1_MB10_DATA1(val)		bfin_write16(CAN1_MB10_DATA1, val)
+#define bfin_read_CAN1_MB10_DATA2()		bfin_read16(CAN1_MB10_DATA2)
+#define bfin_write_CAN1_MB10_DATA2(val)		bfin_write16(CAN1_MB10_DATA2, val)
+#define bfin_read_CAN1_MB10_DATA3()		bfin_read16(CAN1_MB10_DATA3)
+#define bfin_write_CAN1_MB10_DATA3(val)		bfin_write16(CAN1_MB10_DATA3, val)
+#define bfin_read_CAN1_MB10_LENGTH()		bfin_read16(CAN1_MB10_LENGTH)
+#define bfin_write_CAN1_MB10_LENGTH(val)	bfin_write16(CAN1_MB10_LENGTH, val)
+#define bfin_read_CAN1_MB10_TIMESTAMP()		bfin_read16(CAN1_MB10_TIMESTAMP)
+#define bfin_write_CAN1_MB10_TIMESTAMP(val)	bfin_write16(CAN1_MB10_TIMESTAMP, val)
+#define bfin_read_CAN1_MB10_ID0()		bfin_read16(CAN1_MB10_ID0)
+#define bfin_write_CAN1_MB10_ID0(val)		bfin_write16(CAN1_MB10_ID0, val)
+#define bfin_read_CAN1_MB10_ID1()		bfin_read16(CAN1_MB10_ID1)
+#define bfin_write_CAN1_MB10_ID1(val)		bfin_write16(CAN1_MB10_ID1, val)
+#define bfin_read_CAN1_MB11_DATA0()		bfin_read16(CAN1_MB11_DATA0)
+#define bfin_write_CAN1_MB11_DATA0(val)		bfin_write16(CAN1_MB11_DATA0, val)
+#define bfin_read_CAN1_MB11_DATA1()		bfin_read16(CAN1_MB11_DATA1)
+#define bfin_write_CAN1_MB11_DATA1(val)		bfin_write16(CAN1_MB11_DATA1, val)
+#define bfin_read_CAN1_MB11_DATA2()		bfin_read16(CAN1_MB11_DATA2)
+#define bfin_write_CAN1_MB11_DATA2(val)		bfin_write16(CAN1_MB11_DATA2, val)
+#define bfin_read_CAN1_MB11_DATA3()		bfin_read16(CAN1_MB11_DATA3)
+#define bfin_write_CAN1_MB11_DATA3(val)		bfin_write16(CAN1_MB11_DATA3, val)
+#define bfin_read_CAN1_MB11_LENGTH()		bfin_read16(CAN1_MB11_LENGTH)
+#define bfin_write_CAN1_MB11_LENGTH(val)	bfin_write16(CAN1_MB11_LENGTH, val)
+#define bfin_read_CAN1_MB11_TIMESTAMP()		bfin_read16(CAN1_MB11_TIMESTAMP)
+#define bfin_write_CAN1_MB11_TIMESTAMP(val)	bfin_write16(CAN1_MB11_TIMESTAMP, val)
+#define bfin_read_CAN1_MB11_ID0()		bfin_read16(CAN1_MB11_ID0)
+#define bfin_write_CAN1_MB11_ID0(val)		bfin_write16(CAN1_MB11_ID0, val)
+#define bfin_read_CAN1_MB11_ID1()		bfin_read16(CAN1_MB11_ID1)
+#define bfin_write_CAN1_MB11_ID1(val)		bfin_write16(CAN1_MB11_ID1, val)
+#define bfin_read_CAN1_MB12_DATA0()		bfin_read16(CAN1_MB12_DATA0)
+#define bfin_write_CAN1_MB12_DATA0(val)		bfin_write16(CAN1_MB12_DATA0, val)
+#define bfin_read_CAN1_MB12_DATA1()		bfin_read16(CAN1_MB12_DATA1)
+#define bfin_write_CAN1_MB12_DATA1(val)		bfin_write16(CAN1_MB12_DATA1, val)
+#define bfin_read_CAN1_MB12_DATA2()		bfin_read16(CAN1_MB12_DATA2)
+#define bfin_write_CAN1_MB12_DATA2(val)		bfin_write16(CAN1_MB12_DATA2, val)
+#define bfin_read_CAN1_MB12_DATA3()		bfin_read16(CAN1_MB12_DATA3)
+#define bfin_write_CAN1_MB12_DATA3(val)		bfin_write16(CAN1_MB12_DATA3, val)
+#define bfin_read_CAN1_MB12_LENGTH()		bfin_read16(CAN1_MB12_LENGTH)
+#define bfin_write_CAN1_MB12_LENGTH(val)	bfin_write16(CAN1_MB12_LENGTH, val)
+#define bfin_read_CAN1_MB12_TIMESTAMP()		bfin_read16(CAN1_MB12_TIMESTAMP)
+#define bfin_write_CAN1_MB12_TIMESTAMP(val)	bfin_write16(CAN1_MB12_TIMESTAMP, val)
+#define bfin_read_CAN1_MB12_ID0()		bfin_read16(CAN1_MB12_ID0)
+#define bfin_write_CAN1_MB12_ID0(val)		bfin_write16(CAN1_MB12_ID0, val)
+#define bfin_read_CAN1_MB12_ID1()		bfin_read16(CAN1_MB12_ID1)
+#define bfin_write_CAN1_MB12_ID1(val)		bfin_write16(CAN1_MB12_ID1, val)
+#define bfin_read_CAN1_MB13_DATA0()		bfin_read16(CAN1_MB13_DATA0)
+#define bfin_write_CAN1_MB13_DATA0(val)		bfin_write16(CAN1_MB13_DATA0, val)
+#define bfin_read_CAN1_MB13_DATA1()		bfin_read16(CAN1_MB13_DATA1)
+#define bfin_write_CAN1_MB13_DATA1(val)		bfin_write16(CAN1_MB13_DATA1, val)
+#define bfin_read_CAN1_MB13_DATA2()		bfin_read16(CAN1_MB13_DATA2)
+#define bfin_write_CAN1_MB13_DATA2(val)		bfin_write16(CAN1_MB13_DATA2, val)
+#define bfin_read_CAN1_MB13_DATA3()		bfin_read16(CAN1_MB13_DATA3)
+#define bfin_write_CAN1_MB13_DATA3(val)		bfin_write16(CAN1_MB13_DATA3, val)
+#define bfin_read_CAN1_MB13_LENGTH()		bfin_read16(CAN1_MB13_LENGTH)
+#define bfin_write_CAN1_MB13_LENGTH(val)	bfin_write16(CAN1_MB13_LENGTH, val)
+#define bfin_read_CAN1_MB13_TIMESTAMP()		bfin_read16(CAN1_MB13_TIMESTAMP)
+#define bfin_write_CAN1_MB13_TIMESTAMP(val)	bfin_write16(CAN1_MB13_TIMESTAMP, val)
+#define bfin_read_CAN1_MB13_ID0()		bfin_read16(CAN1_MB13_ID0)
+#define bfin_write_CAN1_MB13_ID0(val)		bfin_write16(CAN1_MB13_ID0, val)
+#define bfin_read_CAN1_MB13_ID1()		bfin_read16(CAN1_MB13_ID1)
+#define bfin_write_CAN1_MB13_ID1(val)		bfin_write16(CAN1_MB13_ID1, val)
+#define bfin_read_CAN1_MB14_DATA0()		bfin_read16(CAN1_MB14_DATA0)
+#define bfin_write_CAN1_MB14_DATA0(val)		bfin_write16(CAN1_MB14_DATA0, val)
+#define bfin_read_CAN1_MB14_DATA1()		bfin_read16(CAN1_MB14_DATA1)
+#define bfin_write_CAN1_MB14_DATA1(val)		bfin_write16(CAN1_MB14_DATA1, val)
+#define bfin_read_CAN1_MB14_DATA2()		bfin_read16(CAN1_MB14_DATA2)
+#define bfin_write_CAN1_MB14_DATA2(val)		bfin_write16(CAN1_MB14_DATA2, val)
+#define bfin_read_CAN1_MB14_DATA3()		bfin_read16(CAN1_MB14_DATA3)
+#define bfin_write_CAN1_MB14_DATA3(val)		bfin_write16(CAN1_MB14_DATA3, val)
+#define bfin_read_CAN1_MB14_LENGTH()		bfin_read16(CAN1_MB14_LENGTH)
+#define bfin_write_CAN1_MB14_LENGTH(val)	bfin_write16(CAN1_MB14_LENGTH, val)
+#define bfin_read_CAN1_MB14_TIMESTAMP()		bfin_read16(CAN1_MB14_TIMESTAMP)
+#define bfin_write_CAN1_MB14_TIMESTAMP(val)	bfin_write16(CAN1_MB14_TIMESTAMP, val)
+#define bfin_read_CAN1_MB14_ID0()		bfin_read16(CAN1_MB14_ID0)
+#define bfin_write_CAN1_MB14_ID0(val)		bfin_write16(CAN1_MB14_ID0, val)
+#define bfin_read_CAN1_MB14_ID1()		bfin_read16(CAN1_MB14_ID1)
+#define bfin_write_CAN1_MB14_ID1(val)		bfin_write16(CAN1_MB14_ID1, val)
+#define bfin_read_CAN1_MB15_DATA0()		bfin_read16(CAN1_MB15_DATA0)
+#define bfin_write_CAN1_MB15_DATA0(val)		bfin_write16(CAN1_MB15_DATA0, val)
+#define bfin_read_CAN1_MB15_DATA1()		bfin_read16(CAN1_MB15_DATA1)
+#define bfin_write_CAN1_MB15_DATA1(val)		bfin_write16(CAN1_MB15_DATA1, val)
+#define bfin_read_CAN1_MB15_DATA2()		bfin_read16(CAN1_MB15_DATA2)
+#define bfin_write_CAN1_MB15_DATA2(val)		bfin_write16(CAN1_MB15_DATA2, val)
+#define bfin_read_CAN1_MB15_DATA3()		bfin_read16(CAN1_MB15_DATA3)
+#define bfin_write_CAN1_MB15_DATA3(val)		bfin_write16(CAN1_MB15_DATA3, val)
+#define bfin_read_CAN1_MB15_LENGTH()		bfin_read16(CAN1_MB15_LENGTH)
+#define bfin_write_CAN1_MB15_LENGTH(val)	bfin_write16(CAN1_MB15_LENGTH, val)
+#define bfin_read_CAN1_MB15_TIMESTAMP()		bfin_read16(CAN1_MB15_TIMESTAMP)
+#define bfin_write_CAN1_MB15_TIMESTAMP(val)	bfin_write16(CAN1_MB15_TIMESTAMP, val)
+#define bfin_read_CAN1_MB15_ID0()		bfin_read16(CAN1_MB15_ID0)
+#define bfin_write_CAN1_MB15_ID0(val)		bfin_write16(CAN1_MB15_ID0, val)
+#define bfin_read_CAN1_MB15_ID1()		bfin_read16(CAN1_MB15_ID1)
+#define bfin_write_CAN1_MB15_ID1(val)		bfin_write16(CAN1_MB15_ID1, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB16_DATA0()		bfin_read16(CAN1_MB16_DATA0)
+#define bfin_write_CAN1_MB16_DATA0(val)		bfin_write16(CAN1_MB16_DATA0, val)
+#define bfin_read_CAN1_MB16_DATA1()		bfin_read16(CAN1_MB16_DATA1)
+#define bfin_write_CAN1_MB16_DATA1(val)		bfin_write16(CAN1_MB16_DATA1, val)
+#define bfin_read_CAN1_MB16_DATA2()		bfin_read16(CAN1_MB16_DATA2)
+#define bfin_write_CAN1_MB16_DATA2(val)		bfin_write16(CAN1_MB16_DATA2, val)
+#define bfin_read_CAN1_MB16_DATA3()		bfin_read16(CAN1_MB16_DATA3)
+#define bfin_write_CAN1_MB16_DATA3(val)		bfin_write16(CAN1_MB16_DATA3, val)
+#define bfin_read_CAN1_MB16_LENGTH()		bfin_read16(CAN1_MB16_LENGTH)
+#define bfin_write_CAN1_MB16_LENGTH(val)	bfin_write16(CAN1_MB16_LENGTH, val)
+#define bfin_read_CAN1_MB16_TIMESTAMP()		bfin_read16(CAN1_MB16_TIMESTAMP)
+#define bfin_write_CAN1_MB16_TIMESTAMP(val)	bfin_write16(CAN1_MB16_TIMESTAMP, val)
+#define bfin_read_CAN1_MB16_ID0()		bfin_read16(CAN1_MB16_ID0)
+#define bfin_write_CAN1_MB16_ID0(val)		bfin_write16(CAN1_MB16_ID0, val)
+#define bfin_read_CAN1_MB16_ID1()		bfin_read16(CAN1_MB16_ID1)
+#define bfin_write_CAN1_MB16_ID1(val)		bfin_write16(CAN1_MB16_ID1, val)
+#define bfin_read_CAN1_MB17_DATA0()		bfin_read16(CAN1_MB17_DATA0)
+#define bfin_write_CAN1_MB17_DATA0(val)		bfin_write16(CAN1_MB17_DATA0, val)
+#define bfin_read_CAN1_MB17_DATA1()		bfin_read16(CAN1_MB17_DATA1)
+#define bfin_write_CAN1_MB17_DATA1(val)		bfin_write16(CAN1_MB17_DATA1, val)
+#define bfin_read_CAN1_MB17_DATA2()		bfin_read16(CAN1_MB17_DATA2)
+#define bfin_write_CAN1_MB17_DATA2(val)		bfin_write16(CAN1_MB17_DATA2, val)
+#define bfin_read_CAN1_MB17_DATA3()		bfin_read16(CAN1_MB17_DATA3)
+#define bfin_write_CAN1_MB17_DATA3(val)		bfin_write16(CAN1_MB17_DATA3, val)
+#define bfin_read_CAN1_MB17_LENGTH()		bfin_read16(CAN1_MB17_LENGTH)
+#define bfin_write_CAN1_MB17_LENGTH(val)	bfin_write16(CAN1_MB17_LENGTH, val)
+#define bfin_read_CAN1_MB17_TIMESTAMP()		bfin_read16(CAN1_MB17_TIMESTAMP)
+#define bfin_write_CAN1_MB17_TIMESTAMP(val)	bfin_write16(CAN1_MB17_TIMESTAMP, val)
+#define bfin_read_CAN1_MB17_ID0()		bfin_read16(CAN1_MB17_ID0)
+#define bfin_write_CAN1_MB17_ID0(val)		bfin_write16(CAN1_MB17_ID0, val)
+#define bfin_read_CAN1_MB17_ID1()		bfin_read16(CAN1_MB17_ID1)
+#define bfin_write_CAN1_MB17_ID1(val)		bfin_write16(CAN1_MB17_ID1, val)
+#define bfin_read_CAN1_MB18_DATA0()		bfin_read16(CAN1_MB18_DATA0)
+#define bfin_write_CAN1_MB18_DATA0(val)		bfin_write16(CAN1_MB18_DATA0, val)
+#define bfin_read_CAN1_MB18_DATA1()		bfin_read16(CAN1_MB18_DATA1)
+#define bfin_write_CAN1_MB18_DATA1(val)		bfin_write16(CAN1_MB18_DATA1, val)
+#define bfin_read_CAN1_MB18_DATA2()		bfin_read16(CAN1_MB18_DATA2)
+#define bfin_write_CAN1_MB18_DATA2(val)		bfin_write16(CAN1_MB18_DATA2, val)
+#define bfin_read_CAN1_MB18_DATA3()		bfin_read16(CAN1_MB18_DATA3)
+#define bfin_write_CAN1_MB18_DATA3(val)		bfin_write16(CAN1_MB18_DATA3, val)
+#define bfin_read_CAN1_MB18_LENGTH()		bfin_read16(CAN1_MB18_LENGTH)
+#define bfin_write_CAN1_MB18_LENGTH(val)	bfin_write16(CAN1_MB18_LENGTH, val)
+#define bfin_read_CAN1_MB18_TIMESTAMP()		bfin_read16(CAN1_MB18_TIMESTAMP)
+#define bfin_write_CAN1_MB18_TIMESTAMP(val)	bfin_write16(CAN1_MB18_TIMESTAMP, val)
+#define bfin_read_CAN1_MB18_ID0()		bfin_read16(CAN1_MB18_ID0)
+#define bfin_write_CAN1_MB18_ID0(val)		bfin_write16(CAN1_MB18_ID0, val)
+#define bfin_read_CAN1_MB18_ID1()		bfin_read16(CAN1_MB18_ID1)
+#define bfin_write_CAN1_MB18_ID1(val)		bfin_write16(CAN1_MB18_ID1, val)
+#define bfin_read_CAN1_MB19_DATA0()		bfin_read16(CAN1_MB19_DATA0)
+#define bfin_write_CAN1_MB19_DATA0(val)		bfin_write16(CAN1_MB19_DATA0, val)
+#define bfin_read_CAN1_MB19_DATA1()		bfin_read16(CAN1_MB19_DATA1)
+#define bfin_write_CAN1_MB19_DATA1(val)		bfin_write16(CAN1_MB19_DATA1, val)
+#define bfin_read_CAN1_MB19_DATA2()		bfin_read16(CAN1_MB19_DATA2)
+#define bfin_write_CAN1_MB19_DATA2(val)		bfin_write16(CAN1_MB19_DATA2, val)
+#define bfin_read_CAN1_MB19_DATA3()		bfin_read16(CAN1_MB19_DATA3)
+#define bfin_write_CAN1_MB19_DATA3(val)		bfin_write16(CAN1_MB19_DATA3, val)
+#define bfin_read_CAN1_MB19_LENGTH()		bfin_read16(CAN1_MB19_LENGTH)
+#define bfin_write_CAN1_MB19_LENGTH(val)	bfin_write16(CAN1_MB19_LENGTH, val)
+#define bfin_read_CAN1_MB19_TIMESTAMP()		bfin_read16(CAN1_MB19_TIMESTAMP)
+#define bfin_write_CAN1_MB19_TIMESTAMP(val)	bfin_write16(CAN1_MB19_TIMESTAMP, val)
+#define bfin_read_CAN1_MB19_ID0()		bfin_read16(CAN1_MB19_ID0)
+#define bfin_write_CAN1_MB19_ID0(val)		bfin_write16(CAN1_MB19_ID0, val)
+#define bfin_read_CAN1_MB19_ID1()		bfin_read16(CAN1_MB19_ID1)
+#define bfin_write_CAN1_MB19_ID1(val)		bfin_write16(CAN1_MB19_ID1, val)
+#define bfin_read_CAN1_MB20_DATA0()		bfin_read16(CAN1_MB20_DATA0)
+#define bfin_write_CAN1_MB20_DATA0(val)		bfin_write16(CAN1_MB20_DATA0, val)
+#define bfin_read_CAN1_MB20_DATA1()		bfin_read16(CAN1_MB20_DATA1)
+#define bfin_write_CAN1_MB20_DATA1(val)		bfin_write16(CAN1_MB20_DATA1, val)
+#define bfin_read_CAN1_MB20_DATA2()		bfin_read16(CAN1_MB20_DATA2)
+#define bfin_write_CAN1_MB20_DATA2(val)		bfin_write16(CAN1_MB20_DATA2, val)
+#define bfin_read_CAN1_MB20_DATA3()		bfin_read16(CAN1_MB20_DATA3)
+#define bfin_write_CAN1_MB20_DATA3(val)		bfin_write16(CAN1_MB20_DATA3, val)
+#define bfin_read_CAN1_MB20_LENGTH()		bfin_read16(CAN1_MB20_LENGTH)
+#define bfin_write_CAN1_MB20_LENGTH(val)	bfin_write16(CAN1_MB20_LENGTH, val)
+#define bfin_read_CAN1_MB20_TIMESTAMP()		bfin_read16(CAN1_MB20_TIMESTAMP)
+#define bfin_write_CAN1_MB20_TIMESTAMP(val)	bfin_write16(CAN1_MB20_TIMESTAMP, val)
+#define bfin_read_CAN1_MB20_ID0()		bfin_read16(CAN1_MB20_ID0)
+#define bfin_write_CAN1_MB20_ID0(val)		bfin_write16(CAN1_MB20_ID0, val)
+#define bfin_read_CAN1_MB20_ID1()		bfin_read16(CAN1_MB20_ID1)
+#define bfin_write_CAN1_MB20_ID1(val)		bfin_write16(CAN1_MB20_ID1, val)
+#define bfin_read_CAN1_MB21_DATA0()		bfin_read16(CAN1_MB21_DATA0)
+#define bfin_write_CAN1_MB21_DATA0(val)		bfin_write16(CAN1_MB21_DATA0, val)
+#define bfin_read_CAN1_MB21_DATA1()		bfin_read16(CAN1_MB21_DATA1)
+#define bfin_write_CAN1_MB21_DATA1(val)		bfin_write16(CAN1_MB21_DATA1, val)
+#define bfin_read_CAN1_MB21_DATA2()		bfin_read16(CAN1_MB21_DATA2)
+#define bfin_write_CAN1_MB21_DATA2(val)		bfin_write16(CAN1_MB21_DATA2, val)
+#define bfin_read_CAN1_MB21_DATA3()		bfin_read16(CAN1_MB21_DATA3)
+#define bfin_write_CAN1_MB21_DATA3(val)		bfin_write16(CAN1_MB21_DATA3, val)
+#define bfin_read_CAN1_MB21_LENGTH()		bfin_read16(CAN1_MB21_LENGTH)
+#define bfin_write_CAN1_MB21_LENGTH(val)	bfin_write16(CAN1_MB21_LENGTH, val)
+#define bfin_read_CAN1_MB21_TIMESTAMP()		bfin_read16(CAN1_MB21_TIMESTAMP)
+#define bfin_write_CAN1_MB21_TIMESTAMP(val)	bfin_write16(CAN1_MB21_TIMESTAMP, val)
+#define bfin_read_CAN1_MB21_ID0()		bfin_read16(CAN1_MB21_ID0)
+#define bfin_write_CAN1_MB21_ID0(val)		bfin_write16(CAN1_MB21_ID0, val)
+#define bfin_read_CAN1_MB21_ID1()		bfin_read16(CAN1_MB21_ID1)
+#define bfin_write_CAN1_MB21_ID1(val)		bfin_write16(CAN1_MB21_ID1, val)
+#define bfin_read_CAN1_MB22_DATA0()		bfin_read16(CAN1_MB22_DATA0)
+#define bfin_write_CAN1_MB22_DATA0(val)		bfin_write16(CAN1_MB22_DATA0, val)
+#define bfin_read_CAN1_MB22_DATA1()		bfin_read16(CAN1_MB22_DATA1)
+#define bfin_write_CAN1_MB22_DATA1(val)		bfin_write16(CAN1_MB22_DATA1, val)
+#define bfin_read_CAN1_MB22_DATA2()		bfin_read16(CAN1_MB22_DATA2)
+#define bfin_write_CAN1_MB22_DATA2(val)		bfin_write16(CAN1_MB22_DATA2, val)
+#define bfin_read_CAN1_MB22_DATA3()		bfin_read16(CAN1_MB22_DATA3)
+#define bfin_write_CAN1_MB22_DATA3(val)		bfin_write16(CAN1_MB22_DATA3, val)
+#define bfin_read_CAN1_MB22_LENGTH()		bfin_read16(CAN1_MB22_LENGTH)
+#define bfin_write_CAN1_MB22_LENGTH(val)	bfin_write16(CAN1_MB22_LENGTH, val)
+#define bfin_read_CAN1_MB22_TIMESTAMP()		bfin_read16(CAN1_MB22_TIMESTAMP)
+#define bfin_write_CAN1_MB22_TIMESTAMP(val)	bfin_write16(CAN1_MB22_TIMESTAMP, val)
+#define bfin_read_CAN1_MB22_ID0()		bfin_read16(CAN1_MB22_ID0)
+#define bfin_write_CAN1_MB22_ID0(val)		bfin_write16(CAN1_MB22_ID0, val)
+#define bfin_read_CAN1_MB22_ID1()		bfin_read16(CAN1_MB22_ID1)
+#define bfin_write_CAN1_MB22_ID1(val)		bfin_write16(CAN1_MB22_ID1, val)
+#define bfin_read_CAN1_MB23_DATA0()		bfin_read16(CAN1_MB23_DATA0)
+#define bfin_write_CAN1_MB23_DATA0(val)		bfin_write16(CAN1_MB23_DATA0, val)
+#define bfin_read_CAN1_MB23_DATA1()		bfin_read16(CAN1_MB23_DATA1)
+#define bfin_write_CAN1_MB23_DATA1(val)		bfin_write16(CAN1_MB23_DATA1, val)
+#define bfin_read_CAN1_MB23_DATA2()		bfin_read16(CAN1_MB23_DATA2)
+#define bfin_write_CAN1_MB23_DATA2(val)		bfin_write16(CAN1_MB23_DATA2, val)
+#define bfin_read_CAN1_MB23_DATA3()		bfin_read16(CAN1_MB23_DATA3)
+#define bfin_write_CAN1_MB23_DATA3(val)		bfin_write16(CAN1_MB23_DATA3, val)
+#define bfin_read_CAN1_MB23_LENGTH()		bfin_read16(CAN1_MB23_LENGTH)
+#define bfin_write_CAN1_MB23_LENGTH(val)	bfin_write16(CAN1_MB23_LENGTH, val)
+#define bfin_read_CAN1_MB23_TIMESTAMP()		bfin_read16(CAN1_MB23_TIMESTAMP)
+#define bfin_write_CAN1_MB23_TIMESTAMP(val)	bfin_write16(CAN1_MB23_TIMESTAMP, val)
+#define bfin_read_CAN1_MB23_ID0()		bfin_read16(CAN1_MB23_ID0)
+#define bfin_write_CAN1_MB23_ID0(val)		bfin_write16(CAN1_MB23_ID0, val)
+#define bfin_read_CAN1_MB23_ID1()		bfin_read16(CAN1_MB23_ID1)
+#define bfin_write_CAN1_MB23_ID1(val)		bfin_write16(CAN1_MB23_ID1, val)
+#define bfin_read_CAN1_MB24_DATA0()		bfin_read16(CAN1_MB24_DATA0)
+#define bfin_write_CAN1_MB24_DATA0(val)		bfin_write16(CAN1_MB24_DATA0, val)
+#define bfin_read_CAN1_MB24_DATA1()		bfin_read16(CAN1_MB24_DATA1)
+#define bfin_write_CAN1_MB24_DATA1(val)		bfin_write16(CAN1_MB24_DATA1, val)
+#define bfin_read_CAN1_MB24_DATA2()		bfin_read16(CAN1_MB24_DATA2)
+#define bfin_write_CAN1_MB24_DATA2(val)		bfin_write16(CAN1_MB24_DATA2, val)
+#define bfin_read_CAN1_MB24_DATA3()		bfin_read16(CAN1_MB24_DATA3)
+#define bfin_write_CAN1_MB24_DATA3(val)		bfin_write16(CAN1_MB24_DATA3, val)
+#define bfin_read_CAN1_MB24_LENGTH()		bfin_read16(CAN1_MB24_LENGTH)
+#define bfin_write_CAN1_MB24_LENGTH(val)	bfin_write16(CAN1_MB24_LENGTH, val)
+#define bfin_read_CAN1_MB24_TIMESTAMP()		bfin_read16(CAN1_MB24_TIMESTAMP)
+#define bfin_write_CAN1_MB24_TIMESTAMP(val)	bfin_write16(CAN1_MB24_TIMESTAMP, val)
+#define bfin_read_CAN1_MB24_ID0()		bfin_read16(CAN1_MB24_ID0)
+#define bfin_write_CAN1_MB24_ID0(val)		bfin_write16(CAN1_MB24_ID0, val)
+#define bfin_read_CAN1_MB24_ID1()		bfin_read16(CAN1_MB24_ID1)
+#define bfin_write_CAN1_MB24_ID1(val)		bfin_write16(CAN1_MB24_ID1, val)
+#define bfin_read_CAN1_MB25_DATA0()		bfin_read16(CAN1_MB25_DATA0)
+#define bfin_write_CAN1_MB25_DATA0(val)		bfin_write16(CAN1_MB25_DATA0, val)
+#define bfin_read_CAN1_MB25_DATA1()		bfin_read16(CAN1_MB25_DATA1)
+#define bfin_write_CAN1_MB25_DATA1(val)		bfin_write16(CAN1_MB25_DATA1, val)
+#define bfin_read_CAN1_MB25_DATA2()		bfin_read16(CAN1_MB25_DATA2)
+#define bfin_write_CAN1_MB25_DATA2(val)		bfin_write16(CAN1_MB25_DATA2, val)
+#define bfin_read_CAN1_MB25_DATA3()		bfin_read16(CAN1_MB25_DATA3)
+#define bfin_write_CAN1_MB25_DATA3(val)		bfin_write16(CAN1_MB25_DATA3, val)
+#define bfin_read_CAN1_MB25_LENGTH()		bfin_read16(CAN1_MB25_LENGTH)
+#define bfin_write_CAN1_MB25_LENGTH(val)	bfin_write16(CAN1_MB25_LENGTH, val)
+#define bfin_read_CAN1_MB25_TIMESTAMP()		bfin_read16(CAN1_MB25_TIMESTAMP)
+#define bfin_write_CAN1_MB25_TIMESTAMP(val)	bfin_write16(CAN1_MB25_TIMESTAMP, val)
+#define bfin_read_CAN1_MB25_ID0()		bfin_read16(CAN1_MB25_ID0)
+#define bfin_write_CAN1_MB25_ID0(val)		bfin_write16(CAN1_MB25_ID0, val)
+#define bfin_read_CAN1_MB25_ID1()		bfin_read16(CAN1_MB25_ID1)
+#define bfin_write_CAN1_MB25_ID1(val)		bfin_write16(CAN1_MB25_ID1, val)
+#define bfin_read_CAN1_MB26_DATA0()		bfin_read16(CAN1_MB26_DATA0)
+#define bfin_write_CAN1_MB26_DATA0(val)		bfin_write16(CAN1_MB26_DATA0, val)
+#define bfin_read_CAN1_MB26_DATA1()		bfin_read16(CAN1_MB26_DATA1)
+#define bfin_write_CAN1_MB26_DATA1(val)		bfin_write16(CAN1_MB26_DATA1, val)
+#define bfin_read_CAN1_MB26_DATA2()		bfin_read16(CAN1_MB26_DATA2)
+#define bfin_write_CAN1_MB26_DATA2(val)		bfin_write16(CAN1_MB26_DATA2, val)
+#define bfin_read_CAN1_MB26_DATA3()		bfin_read16(CAN1_MB26_DATA3)
+#define bfin_write_CAN1_MB26_DATA3(val)		bfin_write16(CAN1_MB26_DATA3, val)
+#define bfin_read_CAN1_MB26_LENGTH()		bfin_read16(CAN1_MB26_LENGTH)
+#define bfin_write_CAN1_MB26_LENGTH(val)	bfin_write16(CAN1_MB26_LENGTH, val)
+#define bfin_read_CAN1_MB26_TIMESTAMP()		bfin_read16(CAN1_MB26_TIMESTAMP)
+#define bfin_write_CAN1_MB26_TIMESTAMP(val)	bfin_write16(CAN1_MB26_TIMESTAMP, val)
+#define bfin_read_CAN1_MB26_ID0()		bfin_read16(CAN1_MB26_ID0)
+#define bfin_write_CAN1_MB26_ID0(val)		bfin_write16(CAN1_MB26_ID0, val)
+#define bfin_read_CAN1_MB26_ID1()		bfin_read16(CAN1_MB26_ID1)
+#define bfin_write_CAN1_MB26_ID1(val)		bfin_write16(CAN1_MB26_ID1, val)
+#define bfin_read_CAN1_MB27_DATA0()		bfin_read16(CAN1_MB27_DATA0)
+#define bfin_write_CAN1_MB27_DATA0(val)		bfin_write16(CAN1_MB27_DATA0, val)
+#define bfin_read_CAN1_MB27_DATA1()		bfin_read16(CAN1_MB27_DATA1)
+#define bfin_write_CAN1_MB27_DATA1(val)		bfin_write16(CAN1_MB27_DATA1, val)
+#define bfin_read_CAN1_MB27_DATA2()		bfin_read16(CAN1_MB27_DATA2)
+#define bfin_write_CAN1_MB27_DATA2(val)		bfin_write16(CAN1_MB27_DATA2, val)
+#define bfin_read_CAN1_MB27_DATA3()		bfin_read16(CAN1_MB27_DATA3)
+#define bfin_write_CAN1_MB27_DATA3(val)		bfin_write16(CAN1_MB27_DATA3, val)
+#define bfin_read_CAN1_MB27_LENGTH()		bfin_read16(CAN1_MB27_LENGTH)
+#define bfin_write_CAN1_MB27_LENGTH(val)	bfin_write16(CAN1_MB27_LENGTH, val)
+#define bfin_read_CAN1_MB27_TIMESTAMP()		bfin_read16(CAN1_MB27_TIMESTAMP)
+#define bfin_write_CAN1_MB27_TIMESTAMP(val)	bfin_write16(CAN1_MB27_TIMESTAMP, val)
+#define bfin_read_CAN1_MB27_ID0()		bfin_read16(CAN1_MB27_ID0)
+#define bfin_write_CAN1_MB27_ID0(val)		bfin_write16(CAN1_MB27_ID0, val)
+#define bfin_read_CAN1_MB27_ID1()		bfin_read16(CAN1_MB27_ID1)
+#define bfin_write_CAN1_MB27_ID1(val)		bfin_write16(CAN1_MB27_ID1, val)
+#define bfin_read_CAN1_MB28_DATA0()		bfin_read16(CAN1_MB28_DATA0)
+#define bfin_write_CAN1_MB28_DATA0(val)		bfin_write16(CAN1_MB28_DATA0, val)
+#define bfin_read_CAN1_MB28_DATA1()		bfin_read16(CAN1_MB28_DATA1)
+#define bfin_write_CAN1_MB28_DATA1(val)		bfin_write16(CAN1_MB28_DATA1, val)
+#define bfin_read_CAN1_MB28_DATA2()		bfin_read16(CAN1_MB28_DATA2)
+#define bfin_write_CAN1_MB28_DATA2(val)		bfin_write16(CAN1_MB28_DATA2, val)
+#define bfin_read_CAN1_MB28_DATA3()		bfin_read16(CAN1_MB28_DATA3)
+#define bfin_write_CAN1_MB28_DATA3(val)		bfin_write16(CAN1_MB28_DATA3, val)
+#define bfin_read_CAN1_MB28_LENGTH()		bfin_read16(CAN1_MB28_LENGTH)
+#define bfin_write_CAN1_MB28_LENGTH(val)	bfin_write16(CAN1_MB28_LENGTH, val)
+#define bfin_read_CAN1_MB28_TIMESTAMP()		bfin_read16(CAN1_MB28_TIMESTAMP)
+#define bfin_write_CAN1_MB28_TIMESTAMP(val)	bfin_write16(CAN1_MB28_TIMESTAMP, val)
+#define bfin_read_CAN1_MB28_ID0()		bfin_read16(CAN1_MB28_ID0)
+#define bfin_write_CAN1_MB28_ID0(val)		bfin_write16(CAN1_MB28_ID0, val)
+#define bfin_read_CAN1_MB28_ID1()		bfin_read16(CAN1_MB28_ID1)
+#define bfin_write_CAN1_MB28_ID1(val)		bfin_write16(CAN1_MB28_ID1, val)
+#define bfin_read_CAN1_MB29_DATA0()		bfin_read16(CAN1_MB29_DATA0)
+#define bfin_write_CAN1_MB29_DATA0(val)		bfin_write16(CAN1_MB29_DATA0, val)
+#define bfin_read_CAN1_MB29_DATA1()		bfin_read16(CAN1_MB29_DATA1)
+#define bfin_write_CAN1_MB29_DATA1(val)		bfin_write16(CAN1_MB29_DATA1, val)
+#define bfin_read_CAN1_MB29_DATA2()		bfin_read16(CAN1_MB29_DATA2)
+#define bfin_write_CAN1_MB29_DATA2(val)		bfin_write16(CAN1_MB29_DATA2, val)
+#define bfin_read_CAN1_MB29_DATA3()		bfin_read16(CAN1_MB29_DATA3)
+#define bfin_write_CAN1_MB29_DATA3(val)		bfin_write16(CAN1_MB29_DATA3, val)
+#define bfin_read_CAN1_MB29_LENGTH()		bfin_read16(CAN1_MB29_LENGTH)
+#define bfin_write_CAN1_MB29_LENGTH(val)	bfin_write16(CAN1_MB29_LENGTH, val)
+#define bfin_read_CAN1_MB29_TIMESTAMP()		bfin_read16(CAN1_MB29_TIMESTAMP)
+#define bfin_write_CAN1_MB29_TIMESTAMP(val)	bfin_write16(CAN1_MB29_TIMESTAMP, val)
+#define bfin_read_CAN1_MB29_ID0()		bfin_read16(CAN1_MB29_ID0)
+#define bfin_write_CAN1_MB29_ID0(val)		bfin_write16(CAN1_MB29_ID0, val)
+#define bfin_read_CAN1_MB29_ID1()		bfin_read16(CAN1_MB29_ID1)
+#define bfin_write_CAN1_MB29_ID1(val)		bfin_write16(CAN1_MB29_ID1, val)
+#define bfin_read_CAN1_MB30_DATA0()		bfin_read16(CAN1_MB30_DATA0)
+#define bfin_write_CAN1_MB30_DATA0(val)		bfin_write16(CAN1_MB30_DATA0, val)
+#define bfin_read_CAN1_MB30_DATA1()		bfin_read16(CAN1_MB30_DATA1)
+#define bfin_write_CAN1_MB30_DATA1(val)		bfin_write16(CAN1_MB30_DATA1, val)
+#define bfin_read_CAN1_MB30_DATA2()		bfin_read16(CAN1_MB30_DATA2)
+#define bfin_write_CAN1_MB30_DATA2(val)		bfin_write16(CAN1_MB30_DATA2, val)
+#define bfin_read_CAN1_MB30_DATA3()		bfin_read16(CAN1_MB30_DATA3)
+#define bfin_write_CAN1_MB30_DATA3(val)		bfin_write16(CAN1_MB30_DATA3, val)
+#define bfin_read_CAN1_MB30_LENGTH()		bfin_read16(CAN1_MB30_LENGTH)
+#define bfin_write_CAN1_MB30_LENGTH(val)	bfin_write16(CAN1_MB30_LENGTH, val)
+#define bfin_read_CAN1_MB30_TIMESTAMP()		bfin_read16(CAN1_MB30_TIMESTAMP)
+#define bfin_write_CAN1_MB30_TIMESTAMP(val)	bfin_write16(CAN1_MB30_TIMESTAMP, val)
+#define bfin_read_CAN1_MB30_ID0()		bfin_read16(CAN1_MB30_ID0)
+#define bfin_write_CAN1_MB30_ID0(val)		bfin_write16(CAN1_MB30_ID0, val)
+#define bfin_read_CAN1_MB30_ID1()		bfin_read16(CAN1_MB30_ID1)
+#define bfin_write_CAN1_MB30_ID1(val)		bfin_write16(CAN1_MB30_ID1, val)
+#define bfin_read_CAN1_MB31_DATA0()		bfin_read16(CAN1_MB31_DATA0)
+#define bfin_write_CAN1_MB31_DATA0(val)		bfin_write16(CAN1_MB31_DATA0, val)
+#define bfin_read_CAN1_MB31_DATA1()		bfin_read16(CAN1_MB31_DATA1)
+#define bfin_write_CAN1_MB31_DATA1(val)		bfin_write16(CAN1_MB31_DATA1, val)
+#define bfin_read_CAN1_MB31_DATA2()		bfin_read16(CAN1_MB31_DATA2)
+#define bfin_write_CAN1_MB31_DATA2(val)		bfin_write16(CAN1_MB31_DATA2, val)
+#define bfin_read_CAN1_MB31_DATA3()		bfin_read16(CAN1_MB31_DATA3)
+#define bfin_write_CAN1_MB31_DATA3(val)		bfin_write16(CAN1_MB31_DATA3, val)
+#define bfin_read_CAN1_MB31_LENGTH()		bfin_read16(CAN1_MB31_LENGTH)
+#define bfin_write_CAN1_MB31_LENGTH(val)	bfin_write16(CAN1_MB31_LENGTH, val)
+#define bfin_read_CAN1_MB31_TIMESTAMP()		bfin_read16(CAN1_MB31_TIMESTAMP)
+#define bfin_write_CAN1_MB31_TIMESTAMP(val)	bfin_write16(CAN1_MB31_TIMESTAMP, val)
+#define bfin_read_CAN1_MB31_ID0()		bfin_read16(CAN1_MB31_ID0)
+#define bfin_write_CAN1_MB31_ID0(val)		bfin_write16(CAN1_MB31_ID0, val)
+#define bfin_read_CAN1_MB31_ID1()		bfin_read16(CAN1_MB31_ID1)
+#define bfin_write_CAN1_MB31_ID1(val)		bfin_write16(CAN1_MB31_ID1, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()		bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)		bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)		bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()		bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)		bfin_write16(HOST_TIMEOUT, val)
+
+/* Pixel Combfin_read_()ositor (PIXC) Registers */
+
+#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
+#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
+#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
+#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
+#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
+#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
+#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
+#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
+#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
+#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
+#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
+#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
+#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
+#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
+#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
+#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
+#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
+#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
+#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
+#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
+#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
+#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
+#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
+#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
+#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
+#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
+#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
+#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
+#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
+#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
+#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
+#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
+#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
+#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
+#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
+#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
+#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
+#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
+
+/* Handshake MDMA 0 Registers */
+
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+/* Handshake MDMA 1 Registers */
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+#endif /* _CDEF_BF544_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
new file mode 100644
index 00000000000..93376e90dfc
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -0,0 +1,832 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/cdefBF547.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF548_H
+#define _CDEF_BF548_H
+
+/* include all Core registers and bit definitions */
+#include "defBF548.h"
+
+/* include core sbfin_read_()ecific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+
+/* Timer Registers */
+
+#define bfin_read_TIMER8_CONFIG()	bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)	bfin_write16(TIMER8_CONFIG, val)
+#define bfin_read_TIMER8_COUNTER()	bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)	bfin_write32(TIMER8_COUNTER, val)
+#define bfin_read_TIMER8_PERIOD()	bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)	bfin_write32(TIMER8_PERIOD, val)
+#define bfin_read_TIMER8_WIDTH()	bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)	bfin_write32(TIMER8_WIDTH, val)
+#define bfin_read_TIMER9_CONFIG()	bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)	bfin_write16(TIMER9_CONFIG, val)
+#define bfin_read_TIMER9_COUNTER()	bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)	bfin_write32(TIMER9_COUNTER, val)
+#define bfin_read_TIMER9_PERIOD()	bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)	bfin_write32(TIMER9_PERIOD, val)
+#define bfin_read_TIMER9_WIDTH()	bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)	bfin_write32(TIMER9_WIDTH, val)
+#define bfin_read_TIMER10_CONFIG()	bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)	bfin_write16(TIMER10_CONFIG, val)
+#define bfin_read_TIMER10_COUNTER()	bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)	bfin_write32(TIMER10_COUNTER, val)
+#define bfin_read_TIMER10_PERIOD()	bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)	bfin_write32(TIMER10_PERIOD, val)
+#define bfin_read_TIMER10_WIDTH()	bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)	bfin_write32(TIMER10_WIDTH, val)
+
+/* Timer Groubfin_read_() of 3 */
+
+#define bfin_read_TIMER_ENABLE1()	bfin_read16(TIMER_ENABLE1)
+#define bfin_write_TIMER_ENABLE1(val)	bfin_write16(TIMER_ENABLE1, val)
+#define bfin_read_TIMER_DISABLE1()	bfin_read16(TIMER_DISABLE1)
+#define bfin_write_TIMER_DISABLE1(val)	bfin_write16(TIMER_DISABLE1, val)
+#define bfin_read_TIMER_STATUS1()	bfin_read32(TIMER_STATUS1)
+#define bfin_write_TIMER_STATUS1(val)	bfin_write32(TIMER_STATUS1, val)
+
+/* SPORT0 Registers */
+
+#define bfin_read_SPORT0_TCR1()		bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)	bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()		bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)	bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()	bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)	bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()	bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)	bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()		bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)	bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()		bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)	bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1()		bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)	bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()		bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)	bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()	bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)	bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()	bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)	bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()		bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)	bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()		bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)	bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()	bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)	bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()	bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)	bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()	bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)	bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()	bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)	bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()	bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)	bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()	bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)	bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()	bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)	bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()	bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)	bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()	bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)	bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()	bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)	bfin_write32(SPORT0_MRCS3, val)
+
+/* EPPI0 Registers */
+
+#define bfin_read_EPPI0_STATUS()	bfin_read16(EPPI0_STATUS)
+#define bfin_write_EPPI0_STATUS(val)	bfin_write16(EPPI0_STATUS, val)
+#define bfin_read_EPPI0_HCOUNT()	bfin_read16(EPPI0_HCOUNT)
+#define bfin_write_EPPI0_HCOUNT(val)	bfin_write16(EPPI0_HCOUNT, val)
+#define bfin_read_EPPI0_HDELAY()	bfin_read16(EPPI0_HDELAY)
+#define bfin_write_EPPI0_HDELAY(val)	bfin_write16(EPPI0_HDELAY, val)
+#define bfin_read_EPPI0_VCOUNT()	bfin_read16(EPPI0_VCOUNT)
+#define bfin_write_EPPI0_VCOUNT(val)	bfin_write16(EPPI0_VCOUNT, val)
+#define bfin_read_EPPI0_VDELAY()	bfin_read16(EPPI0_VDELAY)
+#define bfin_write_EPPI0_VDELAY(val)	bfin_write16(EPPI0_VDELAY, val)
+#define bfin_read_EPPI0_FRAME()		bfin_read16(EPPI0_FRAME)
+#define bfin_write_EPPI0_FRAME(val)	bfin_write16(EPPI0_FRAME, val)
+#define bfin_read_EPPI0_LINE()		bfin_read16(EPPI0_LINE)
+#define bfin_write_EPPI0_LINE(val)	bfin_write16(EPPI0_LINE, val)
+#define bfin_read_EPPI0_CLKDIV()	bfin_read16(EPPI0_CLKDIV)
+#define bfin_write_EPPI0_CLKDIV(val)	bfin_write16(EPPI0_CLKDIV, val)
+#define bfin_read_EPPI0_CONTROL()	bfin_read32(EPPI0_CONTROL)
+#define bfin_write_EPPI0_CONTROL(val)	bfin_write32(EPPI0_CONTROL, val)
+#define bfin_read_EPPI0_FS1W_HBL()	bfin_read32(EPPI0_FS1W_HBL)
+#define bfin_write_EPPI0_FS1W_HBL(val)	bfin_write32(EPPI0_FS1W_HBL, val)
+#define bfin_read_EPPI0_FS1P_AVPL()	bfin_read32(EPPI0_FS1P_AVPL)
+#define bfin_write_EPPI0_FS1P_AVPL(val)	bfin_write32(EPPI0_FS1P_AVPL, val)
+#define bfin_read_EPPI0_FS2W_LVB()	bfin_read32(EPPI0_FS2W_LVB)
+#define bfin_write_EPPI0_FS2W_LVB(val)	bfin_write32(EPPI0_FS2W_LVB, val)
+#define bfin_read_EPPI0_FS2P_LAVF()	bfin_read32(EPPI0_FS2P_LAVF)
+#define bfin_write_EPPI0_FS2P_LAVF(val)	bfin_write32(EPPI0_FS2P_LAVF, val)
+#define bfin_read_EPPI0_CLIP()		bfin_read32(EPPI0_CLIP)
+#define bfin_write_EPPI0_CLIP(val)	bfin_write32(EPPI0_CLIP, val)
+
+/* UART2 Registers */
+
+#define bfin_read_UART2_DLL()		bfin_read16(UART2_DLL)
+#define bfin_write_UART2_DLL(val)	bfin_write16(UART2_DLL, val)
+#define bfin_read_UART2_DLH()		bfin_read16(UART2_DLH)
+#define bfin_write_UART2_DLH(val)	bfin_write16(UART2_DLH, val)
+#define bfin_read_UART2_GCTL()		bfin_read16(UART2_GCTL)
+#define bfin_write_UART2_GCTL(val)	bfin_write16(UART2_GCTL, val)
+#define bfin_read_UART2_LCR()		bfin_read16(UART2_LCR)
+#define bfin_write_UART2_LCR(val)	bfin_write16(UART2_LCR, val)
+#define bfin_read_UART2_MCR()		bfin_read16(UART2_MCR)
+#define bfin_write_UART2_MCR(val)	bfin_write16(UART2_MCR, val)
+#define bfin_read_UART2_LSR()		bfin_read16(UART2_LSR)
+#define bfin_write_UART2_LSR(val)	bfin_write16(UART2_LSR, val)
+#define bfin_read_UART2_MSR()		bfin_read16(UART2_MSR)
+#define bfin_write_UART2_MSR(val)	bfin_write16(UART2_MSR, val)
+#define bfin_read_UART2_SCR()		bfin_read16(UART2_SCR)
+#define bfin_write_UART2_SCR(val)	bfin_write16(UART2_SCR, val)
+#define bfin_read_UART2_IER_SET()	bfin_read16(UART2_IER_SET)
+#define bfin_write_UART2_IER_SET(val)	bfin_write16(UART2_IER_SET, val)
+#define bfin_read_UART2_IER_CLEAR()	bfin_read16(UART2_IER_CLEAR)
+#define bfin_write_UART2_IER_CLEAR(val)	bfin_write16(UART2_IER_CLEAR, val)
+#define bfin_read_UART2_RBR()		bfin_read16(UART2_RBR)
+#define bfin_write_UART2_RBR(val)	bfin_write16(UART2_RBR, val)
+
+/* Two Wire Interface Registers (TWI1) */
+
+/* SPI2  Registers */
+
+#define bfin_read_SPI2_CTL()		bfin_read16(SPI2_CTL)
+#define bfin_write_SPI2_CTL(val)	bfin_write16(SPI2_CTL, val)
+#define bfin_read_SPI2_FLG()		bfin_read16(SPI2_FLG)
+#define bfin_write_SPI2_FLG(val)	bfin_write16(SPI2_FLG, val)
+#define bfin_read_SPI2_STAT()		bfin_read16(SPI2_STAT)
+#define bfin_write_SPI2_STAT(val)	bfin_write16(SPI2_STAT, val)
+#define bfin_read_SPI2_TDBR()		bfin_read16(SPI2_TDBR)
+#define bfin_write_SPI2_TDBR(val)	bfin_write16(SPI2_TDBR, val)
+#define bfin_read_SPI2_RDBR()		bfin_read16(SPI2_RDBR)
+#define bfin_write_SPI2_RDBR(val)	bfin_write16(SPI2_RDBR, val)
+#define bfin_read_SPI2_BAUD()		bfin_read16(SPI2_BAUD)
+#define bfin_write_SPI2_BAUD(val)	bfin_write16(SPI2_BAUD, val)
+#define bfin_read_SPI2_SHADOW()		bfin_read16(SPI2_SHADOW)
+#define bfin_write_SPI2_SHADOW(val)	bfin_write16(SPI2_SHADOW, val)
+
+/* ATAPI Registers */
+
+#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
+#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
+#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
+#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
+#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
+#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
+#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
+#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
+#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
+#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
+#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
+#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
+#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
+#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
+#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
+#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
+#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
+#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
+#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
+#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
+#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
+#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
+#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
+#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
+#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
+#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
+#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
+#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
+#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
+#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
+#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
+#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
+#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
+#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
+#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
+#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
+#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
+#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
+#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
+#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
+#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
+#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
+#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
+#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
+
+/* SDH Registers */
+
+#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
+#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
+#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
+#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
+#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
+#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
+#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
+#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
+#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
+#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
+#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
+#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
+#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
+#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
+#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
+#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
+#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
+#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
+#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
+#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
+#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
+#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
+#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
+#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
+#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
+#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
+#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
+#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
+#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
+#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
+#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
+#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
+#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
+#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
+#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
+#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
+#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
+#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
+#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
+#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
+#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
+#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
+#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
+#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
+#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
+#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
+#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
+#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
+#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
+#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
+#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
+#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
+#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
+#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
+#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
+#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
+#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
+#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
+#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
+#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
+#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
+#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()	bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)	bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)	bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()	bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)	bfin_write16(HOST_TIMEOUT, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()		bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)	bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()		bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)	bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()		bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)	bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()		bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)	bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()		bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)	bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()		bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)	bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()	bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)	bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()	bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)	bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()		bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)	bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()	bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)	bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()		bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)	bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endbfin_read_()oint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()	bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)	bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()	bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)	bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()	bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)	bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()	bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)	bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()	bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)	bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()	bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)	bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()	bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)	bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()	bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)	bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()	bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)	bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()		bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)	bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()		bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)	bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()		bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)	bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()		bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)	bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
+#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endbfin_read_()oint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+/* Keybfin_read_()ad Registers */
+
+#define bfin_read_KPAD_CTL()		bfin_read16(KPAD_CTL)
+#define bfin_write_KPAD_CTL(val)	bfin_write16(KPAD_CTL, val)
+#define bfin_read_KPAD_PRESCALE()	bfin_read16(KPAD_PRESCALE)
+#define bfin_write_KPAD_PRESCALE(val)	bfin_write16(KPAD_PRESCALE, val)
+#define bfin_read_KPAD_MSEL()		bfin_read16(KPAD_MSEL)
+#define bfin_write_KPAD_MSEL(val)	bfin_write16(KPAD_MSEL, val)
+#define bfin_read_KPAD_ROWCOL()		bfin_read16(KPAD_ROWCOL)
+#define bfin_write_KPAD_ROWCOL(val)	bfin_write16(KPAD_ROWCOL, val)
+#define bfin_read_KPAD_STAT()		bfin_read16(KPAD_STAT)
+#define bfin_write_KPAD_STAT(val)	bfin_write16(KPAD_STAT, val)
+#define bfin_read_KPAD_SOFTEVAL()	bfin_read16(KPAD_SOFTEVAL)
+#define bfin_write_KPAD_SOFTEVAL(val)	bfin_write16(KPAD_SOFTEVAL, val)
+
+/* Pixel Combfin_read_()ositor (PIXC) Registers */
+
+#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
+#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
+#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
+#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
+#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
+#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
+#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
+#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
+#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
+#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
+#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
+#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
+#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
+#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
+#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
+#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
+#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
+#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
+#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
+#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
+#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
+#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
+#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
+#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
+#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
+#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
+#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
+#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
+#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
+#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
+#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
+#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
+#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
+#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
+#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
+#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
+#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
+#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
+
+/* Handshake MDMA 0 Registers */
+
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+/* Handshake MDMA 1 Registers */
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+#endif /* _CDEF_BF548_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
new file mode 100644
index 00000000000..9cd74384136
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -0,0 +1,1577 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/cdefBF548.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF548_H
+#define _CDEF_BF548_H
+
+/* include all Core registers and bit definitions */
+#include "defBF548.h"
+
+/* include core sbfin_read_()ecific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+
+/* Timer Registers */
+
+#define bfin_read_TIMER8_CONFIG()	bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)	bfin_write16(TIMER8_CONFIG, val)
+#define bfin_read_TIMER8_COUNTER()	bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)	bfin_write32(TIMER8_COUNTER, val)
+#define bfin_read_TIMER8_PERIOD()	bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)	bfin_write32(TIMER8_PERIOD, val)
+#define bfin_read_TIMER8_WIDTH()	bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)	bfin_write32(TIMER8_WIDTH, val)
+#define bfin_read_TIMER9_CONFIG()	bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)	bfin_write16(TIMER9_CONFIG, val)
+#define bfin_read_TIMER9_COUNTER()	bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)	bfin_write32(TIMER9_COUNTER, val)
+#define bfin_read_TIMER9_PERIOD()	bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)	bfin_write32(TIMER9_PERIOD, val)
+#define bfin_read_TIMER9_WIDTH()	bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)	bfin_write32(TIMER9_WIDTH, val)
+#define bfin_read_TIMER10_CONFIG()	bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)	bfin_write16(TIMER10_CONFIG, val)
+#define bfin_read_TIMER10_COUNTER()	bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)	bfin_write32(TIMER10_COUNTER, val)
+#define bfin_read_TIMER10_PERIOD()	bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)	bfin_write32(TIMER10_PERIOD, val)
+#define bfin_read_TIMER10_WIDTH()	bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)	bfin_write32(TIMER10_WIDTH, val)
+
+/* Timer Groubfin_read_() of 3 */
+
+#define bfin_read_TIMER_ENABLE1()	bfin_read16(TIMER_ENABLE1)
+#define bfin_write_TIMER_ENABLE1(val)	bfin_write16(TIMER_ENABLE1, val)
+#define bfin_read_TIMER_DISABLE1()	bfin_read16(TIMER_DISABLE1)
+#define bfin_write_TIMER_DISABLE1(val)	bfin_write16(TIMER_DISABLE1, val)
+#define bfin_read_TIMER_STATUS1()	bfin_read32(TIMER_STATUS1)
+#define bfin_write_TIMER_STATUS1(val)	bfin_write32(TIMER_STATUS1, val)
+
+/* SPORT0 Registers */
+
+#define bfin_read_SPORT0_TCR1()		bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)	bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()		bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)	bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()	bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)	bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()	bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)	bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()		bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)	bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()		bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)	bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1()		bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)	bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()		bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)	bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()	bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)	bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()	bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)	bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()		bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)	bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()		bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)	bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()	bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)	bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()	bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)	bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()	bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)	bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()	bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)	bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()	bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)	bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()	bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)	bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()	bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)	bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()	bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)	bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()	bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)	bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()	bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)	bfin_write32(SPORT0_MRCS3, val)
+
+/* EPPI0 Registers */
+
+#define bfin_read_EPPI0_STATUS()	bfin_read16(EPPI0_STATUS)
+#define bfin_write_EPPI0_STATUS(val)	bfin_write16(EPPI0_STATUS, val)
+#define bfin_read_EPPI0_HCOUNT()	bfin_read16(EPPI0_HCOUNT)
+#define bfin_write_EPPI0_HCOUNT(val)	bfin_write16(EPPI0_HCOUNT, val)
+#define bfin_read_EPPI0_HDELAY()	bfin_read16(EPPI0_HDELAY)
+#define bfin_write_EPPI0_HDELAY(val)	bfin_write16(EPPI0_HDELAY, val)
+#define bfin_read_EPPI0_VCOUNT()	bfin_read16(EPPI0_VCOUNT)
+#define bfin_write_EPPI0_VCOUNT(val)	bfin_write16(EPPI0_VCOUNT, val)
+#define bfin_read_EPPI0_VDELAY()	bfin_read16(EPPI0_VDELAY)
+#define bfin_write_EPPI0_VDELAY(val)	bfin_write16(EPPI0_VDELAY, val)
+#define bfin_read_EPPI0_FRAME()		bfin_read16(EPPI0_FRAME)
+#define bfin_write_EPPI0_FRAME(val)	bfin_write16(EPPI0_FRAME, val)
+#define bfin_read_EPPI0_LINE()		bfin_read16(EPPI0_LINE)
+#define bfin_write_EPPI0_LINE(val)	bfin_write16(EPPI0_LINE, val)
+#define bfin_read_EPPI0_CLKDIV()	bfin_read16(EPPI0_CLKDIV)
+#define bfin_write_EPPI0_CLKDIV(val)	bfin_write16(EPPI0_CLKDIV, val)
+#define bfin_read_EPPI0_CONTROL()	bfin_read32(EPPI0_CONTROL)
+#define bfin_write_EPPI0_CONTROL(val)	bfin_write32(EPPI0_CONTROL, val)
+#define bfin_read_EPPI0_FS1W_HBL()	bfin_read32(EPPI0_FS1W_HBL)
+#define bfin_write_EPPI0_FS1W_HBL(val)	bfin_write32(EPPI0_FS1W_HBL, val)
+#define bfin_read_EPPI0_FS1P_AVPL()	bfin_read32(EPPI0_FS1P_AVPL)
+#define bfin_write_EPPI0_FS1P_AVPL(val)	bfin_write32(EPPI0_FS1P_AVPL, val)
+#define bfin_read_EPPI0_FS2W_LVB()	bfin_read32(EPPI0_FS2W_LVB)
+#define bfin_write_EPPI0_FS2W_LVB(val)	bfin_write32(EPPI0_FS2W_LVB, val)
+#define bfin_read_EPPI0_FS2P_LAVF()	bfin_read32(EPPI0_FS2P_LAVF)
+#define bfin_write_EPPI0_FS2P_LAVF(val)	bfin_write32(EPPI0_FS2P_LAVF, val)
+#define bfin_read_EPPI0_CLIP()		bfin_read32(EPPI0_CLIP)
+#define bfin_write_EPPI0_CLIP(val)	bfin_write32(EPPI0_CLIP, val)
+
+/* UART2 Registers */
+
+#define bfin_read_UART2_DLL()		bfin_read16(UART2_DLL)
+#define bfin_write_UART2_DLL(val)	bfin_write16(UART2_DLL, val)
+#define bfin_read_UART2_DLH()		bfin_read16(UART2_DLH)
+#define bfin_write_UART2_DLH(val)	bfin_write16(UART2_DLH, val)
+#define bfin_read_UART2_GCTL()		bfin_read16(UART2_GCTL)
+#define bfin_write_UART2_GCTL(val)	bfin_write16(UART2_GCTL, val)
+#define bfin_read_UART2_LCR()		bfin_read16(UART2_LCR)
+#define bfin_write_UART2_LCR(val)	bfin_write16(UART2_LCR, val)
+#define bfin_read_UART2_MCR()		bfin_read16(UART2_MCR)
+#define bfin_write_UART2_MCR(val)	bfin_write16(UART2_MCR, val)
+#define bfin_read_UART2_LSR()		bfin_read16(UART2_LSR)
+#define bfin_write_UART2_LSR(val)	bfin_write16(UART2_LSR, val)
+#define bfin_read_UART2_MSR()		bfin_read16(UART2_MSR)
+#define bfin_write_UART2_MSR(val)	bfin_write16(UART2_MSR, val)
+#define bfin_read_UART2_SCR()		bfin_read16(UART2_SCR)
+#define bfin_write_UART2_SCR(val)	bfin_write16(UART2_SCR, val)
+#define bfin_read_UART2_IER_SET()	bfin_read16(UART2_IER_SET)
+#define bfin_write_UART2_IER_SET(val)	bfin_write16(UART2_IER_SET, val)
+#define bfin_read_UART2_IER_CLEAR()	bfin_read16(UART2_IER_CLEAR)
+#define bfin_write_UART2_IER_CLEAR(val)	bfin_write16(UART2_IER_CLEAR, val)
+#define bfin_read_UART2_RBR()		bfin_read16(UART2_RBR)
+#define bfin_write_UART2_RBR(val)	bfin_write16(UART2_RBR, val)
+
+/* Two Wire Interface Registers (TWI1) */
+
+/* SPI2  Registers */
+
+#define bfin_read_SPI2_CTL()		bfin_read16(SPI2_CTL)
+#define bfin_write_SPI2_CTL(val)	bfin_write16(SPI2_CTL, val)
+#define bfin_read_SPI2_FLG()		bfin_read16(SPI2_FLG)
+#define bfin_write_SPI2_FLG(val)	bfin_write16(SPI2_FLG, val)
+#define bfin_read_SPI2_STAT()		bfin_read16(SPI2_STAT)
+#define bfin_write_SPI2_STAT(val)	bfin_write16(SPI2_STAT, val)
+#define bfin_read_SPI2_TDBR()		bfin_read16(SPI2_TDBR)
+#define bfin_write_SPI2_TDBR(val)	bfin_write16(SPI2_TDBR, val)
+#define bfin_read_SPI2_RDBR()		bfin_read16(SPI2_RDBR)
+#define bfin_write_SPI2_RDBR(val)	bfin_write16(SPI2_RDBR, val)
+#define bfin_read_SPI2_BAUD()		bfin_read16(SPI2_BAUD)
+#define bfin_write_SPI2_BAUD(val)	bfin_write16(SPI2_BAUD, val)
+#define bfin_read_SPI2_SHADOW()		bfin_read16(SPI2_SHADOW)
+#define bfin_write_SPI2_SHADOW(val)	bfin_write16(SPI2_SHADOW, val)
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define bfin_read_CAN1_MC1()		bfin_read16(CAN1_MC1)
+#define bfin_write_CAN1_MC1(val)	bfin_write16(CAN1_MC1, val)
+#define bfin_read_CAN1_MD1()		bfin_read16(CAN1_MD1)
+#define bfin_write_CAN1_MD1(val)	bfin_write16(CAN1_MD1, val)
+#define bfin_read_CAN1_TRS1()		bfin_read16(CAN1_TRS1)
+#define bfin_write_CAN1_TRS1(val)	bfin_write16(CAN1_TRS1, val)
+#define bfin_read_CAN1_TRR1()		bfin_read16(CAN1_TRR1)
+#define bfin_write_CAN1_TRR1(val)	bfin_write16(CAN1_TRR1, val)
+#define bfin_read_CAN1_TA1()		bfin_read16(CAN1_TA1)
+#define bfin_write_CAN1_TA1(val)	bfin_write16(CAN1_TA1, val)
+#define bfin_read_CAN1_AA1()		bfin_read16(CAN1_AA1)
+#define bfin_write_CAN1_AA1(val)	bfin_write16(CAN1_AA1, val)
+#define bfin_read_CAN1_RMP1()		bfin_read16(CAN1_RMP1)
+#define bfin_write_CAN1_RMP1(val)	bfin_write16(CAN1_RMP1, val)
+#define bfin_read_CAN1_RML1()		bfin_read16(CAN1_RML1)
+#define bfin_write_CAN1_RML1(val)	bfin_write16(CAN1_RML1, val)
+#define bfin_read_CAN1_MBTIF1()		bfin_read16(CAN1_MBTIF1)
+#define bfin_write_CAN1_MBTIF1(val)	bfin_write16(CAN1_MBTIF1, val)
+#define bfin_read_CAN1_MBRIF1()		bfin_read16(CAN1_MBRIF1)
+#define bfin_write_CAN1_MBRIF1(val)	bfin_write16(CAN1_MBRIF1, val)
+#define bfin_read_CAN1_MBIM1()		bfin_read16(CAN1_MBIM1)
+#define bfin_write_CAN1_MBIM1(val)	bfin_write16(CAN1_MBIM1, val)
+#define bfin_read_CAN1_RFH1()		bfin_read16(CAN1_RFH1)
+#define bfin_write_CAN1_RFH1(val)	bfin_write16(CAN1_RFH1, val)
+#define bfin_read_CAN1_OPSS1()		bfin_read16(CAN1_OPSS1)
+#define bfin_write_CAN1_OPSS1(val)	bfin_write16(CAN1_OPSS1, val)
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define bfin_read_CAN1_MC2()		bfin_read16(CAN1_MC2)
+#define bfin_write_CAN1_MC2(val)	bfin_write16(CAN1_MC2, val)
+#define bfin_read_CAN1_MD2()		bfin_read16(CAN1_MD2)
+#define bfin_write_CAN1_MD2(val)	bfin_write16(CAN1_MD2, val)
+#define bfin_read_CAN1_TRS2()		bfin_read16(CAN1_TRS2)
+#define bfin_write_CAN1_TRS2(val)	bfin_write16(CAN1_TRS2, val)
+#define bfin_read_CAN1_TRR2()		bfin_read16(CAN1_TRR2)
+#define bfin_write_CAN1_TRR2(val)	bfin_write16(CAN1_TRR2, val)
+#define bfin_read_CAN1_TA2()		bfin_read16(CAN1_TA2)
+#define bfin_write_CAN1_TA2(val)	bfin_write16(CAN1_TA2, val)
+#define bfin_read_CAN1_AA2()		bfin_read16(CAN1_AA2)
+#define bfin_write_CAN1_AA2(val)	bfin_write16(CAN1_AA2, val)
+#define bfin_read_CAN1_RMP2()		bfin_read16(CAN1_RMP2)
+#define bfin_write_CAN1_RMP2(val)	bfin_write16(CAN1_RMP2, val)
+#define bfin_read_CAN1_RML2()		bfin_read16(CAN1_RML2)
+#define bfin_write_CAN1_RML2(val)	bfin_write16(CAN1_RML2, val)
+#define bfin_read_CAN1_MBTIF2()		bfin_read16(CAN1_MBTIF2)
+#define bfin_write_CAN1_MBTIF2(val)	bfin_write16(CAN1_MBTIF2, val)
+#define bfin_read_CAN1_MBRIF2()		bfin_read16(CAN1_MBRIF2)
+#define bfin_write_CAN1_MBRIF2(val)	bfin_write16(CAN1_MBRIF2, val)
+#define bfin_read_CAN1_MBIM2()		bfin_read16(CAN1_MBIM2)
+#define bfin_write_CAN1_MBIM2(val)	bfin_write16(CAN1_MBIM2, val)
+#define bfin_read_CAN1_RFH2()		bfin_read16(CAN1_RFH2)
+#define bfin_write_CAN1_RFH2(val)	bfin_write16(CAN1_RFH2, val)
+#define bfin_read_CAN1_OPSS2()		bfin_read16(CAN1_OPSS2)
+#define bfin_write_CAN1_OPSS2(val)	bfin_write16(CAN1_OPSS2, val)
+
+/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */
+
+#define bfin_read_CAN1_CLOCK()		bfin_read16(CAN1_CLOCK)
+#define bfin_write_CAN1_CLOCK(val)	bfin_write16(CAN1_CLOCK, val)
+#define bfin_read_CAN1_TIMING()		bfin_read16(CAN1_TIMING)
+#define bfin_write_CAN1_TIMING(val)	bfin_write16(CAN1_TIMING, val)
+#define bfin_read_CAN1_DEBUG()		bfin_read16(CAN1_DEBUG)
+#define bfin_write_CAN1_DEBUG(val)	bfin_write16(CAN1_DEBUG, val)
+#define bfin_read_CAN1_STATUS()		bfin_read16(CAN1_STATUS)
+#define bfin_write_CAN1_STATUS(val)	bfin_write16(CAN1_STATUS, val)
+#define bfin_read_CAN1_CEC()		bfin_read16(CAN1_CEC)
+#define bfin_write_CAN1_CEC(val)	bfin_write16(CAN1_CEC, val)
+#define bfin_read_CAN1_GIS()		bfin_read16(CAN1_GIS)
+#define bfin_write_CAN1_GIS(val)	bfin_write16(CAN1_GIS, val)
+#define bfin_read_CAN1_GIM()		bfin_read16(CAN1_GIM)
+#define bfin_write_CAN1_GIM(val)	bfin_write16(CAN1_GIM, val)
+#define bfin_read_CAN1_GIF()		bfin_read16(CAN1_GIF)
+#define bfin_write_CAN1_GIF(val)	bfin_write16(CAN1_GIF, val)
+#define bfin_read_CAN1_CONTROL()	bfin_read16(CAN1_CONTROL)
+#define bfin_write_CAN1_CONTROL(val)	bfin_write16(CAN1_CONTROL, val)
+#define bfin_read_CAN1_INTR()		bfin_read16(CAN1_INTR)
+#define bfin_write_CAN1_INTR(val)	bfin_write16(CAN1_INTR, val)
+#define bfin_read_CAN1_MBTD()		bfin_read16(CAN1_MBTD)
+#define bfin_write_CAN1_MBTD(val)	bfin_write16(CAN1_MBTD, val)
+#define bfin_read_CAN1_EWR()		bfin_read16(CAN1_EWR)
+#define bfin_write_CAN1_EWR(val)	bfin_write16(CAN1_EWR, val)
+#define bfin_read_CAN1_ESR()		bfin_read16(CAN1_ESR)
+#define bfin_write_CAN1_ESR(val)	bfin_write16(CAN1_ESR, val)
+#define bfin_read_CAN1_UCCNT()		bfin_read16(CAN1_UCCNT)
+#define bfin_write_CAN1_UCCNT(val)	bfin_write16(CAN1_UCCNT, val)
+#define bfin_read_CAN1_UCRC()		bfin_read16(CAN1_UCRC)
+#define bfin_write_CAN1_UCRC(val)	bfin_write16(CAN1_UCRC, val)
+#define bfin_read_CAN1_UCCNF()		bfin_read16(CAN1_UCCNF)
+#define bfin_write_CAN1_UCCNF(val)	bfin_write16(CAN1_UCCNF, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM00L()		bfin_read16(CAN1_AM00L)
+#define bfin_write_CAN1_AM00L(val)	bfin_write16(CAN1_AM00L, val)
+#define bfin_read_CAN1_AM00H()		bfin_read16(CAN1_AM00H)
+#define bfin_write_CAN1_AM00H(val)	bfin_write16(CAN1_AM00H, val)
+#define bfin_read_CAN1_AM01L()		bfin_read16(CAN1_AM01L)
+#define bfin_write_CAN1_AM01L(val)	bfin_write16(CAN1_AM01L, val)
+#define bfin_read_CAN1_AM01H()		bfin_read16(CAN1_AM01H)
+#define bfin_write_CAN1_AM01H(val)	bfin_write16(CAN1_AM01H, val)
+#define bfin_read_CAN1_AM02L()		bfin_read16(CAN1_AM02L)
+#define bfin_write_CAN1_AM02L(val)	bfin_write16(CAN1_AM02L, val)
+#define bfin_read_CAN1_AM02H()		bfin_read16(CAN1_AM02H)
+#define bfin_write_CAN1_AM02H(val)	bfin_write16(CAN1_AM02H, val)
+#define bfin_read_CAN1_AM03L()		bfin_read16(CAN1_AM03L)
+#define bfin_write_CAN1_AM03L(val)	bfin_write16(CAN1_AM03L, val)
+#define bfin_read_CAN1_AM03H()		bfin_read16(CAN1_AM03H)
+#define bfin_write_CAN1_AM03H(val)	bfin_write16(CAN1_AM03H, val)
+#define bfin_read_CAN1_AM04L()		bfin_read16(CAN1_AM04L)
+#define bfin_write_CAN1_AM04L(val)	bfin_write16(CAN1_AM04L, val)
+#define bfin_read_CAN1_AM04H()		bfin_read16(CAN1_AM04H)
+#define bfin_write_CAN1_AM04H(val)	bfin_write16(CAN1_AM04H, val)
+#define bfin_read_CAN1_AM05L()		bfin_read16(CAN1_AM05L)
+#define bfin_write_CAN1_AM05L(val)	bfin_write16(CAN1_AM05L, val)
+#define bfin_read_CAN1_AM05H()		bfin_read16(CAN1_AM05H)
+#define bfin_write_CAN1_AM05H(val)	bfin_write16(CAN1_AM05H, val)
+#define bfin_read_CAN1_AM06L()		bfin_read16(CAN1_AM06L)
+#define bfin_write_CAN1_AM06L(val)	bfin_write16(CAN1_AM06L, val)
+#define bfin_read_CAN1_AM06H()		bfin_read16(CAN1_AM06H)
+#define bfin_write_CAN1_AM06H(val)	bfin_write16(CAN1_AM06H, val)
+#define bfin_read_CAN1_AM07L()		bfin_read16(CAN1_AM07L)
+#define bfin_write_CAN1_AM07L(val)	bfin_write16(CAN1_AM07L, val)
+#define bfin_read_CAN1_AM07H()		bfin_read16(CAN1_AM07H)
+#define bfin_write_CAN1_AM07H(val)	bfin_write16(CAN1_AM07H, val)
+#define bfin_read_CAN1_AM08L()		bfin_read16(CAN1_AM08L)
+#define bfin_write_CAN1_AM08L(val)	bfin_write16(CAN1_AM08L, val)
+#define bfin_read_CAN1_AM08H()		bfin_read16(CAN1_AM08H)
+#define bfin_write_CAN1_AM08H(val)	bfin_write16(CAN1_AM08H, val)
+#define bfin_read_CAN1_AM09L()		bfin_read16(CAN1_AM09L)
+#define bfin_write_CAN1_AM09L(val)	bfin_write16(CAN1_AM09L, val)
+#define bfin_read_CAN1_AM09H()		bfin_read16(CAN1_AM09H)
+#define bfin_write_CAN1_AM09H(val)	bfin_write16(CAN1_AM09H, val)
+#define bfin_read_CAN1_AM10L()		bfin_read16(CAN1_AM10L)
+#define bfin_write_CAN1_AM10L(val)	bfin_write16(CAN1_AM10L, val)
+#define bfin_read_CAN1_AM10H()		bfin_read16(CAN1_AM10H)
+#define bfin_write_CAN1_AM10H(val)	bfin_write16(CAN1_AM10H, val)
+#define bfin_read_CAN1_AM11L()		bfin_read16(CAN1_AM11L)
+#define bfin_write_CAN1_AM11L(val)	bfin_write16(CAN1_AM11L, val)
+#define bfin_read_CAN1_AM11H()		bfin_read16(CAN1_AM11H)
+#define bfin_write_CAN1_AM11H(val)	bfin_write16(CAN1_AM11H, val)
+#define bfin_read_CAN1_AM12L()		bfin_read16(CAN1_AM12L)
+#define bfin_write_CAN1_AM12L(val)	bfin_write16(CAN1_AM12L, val)
+#define bfin_read_CAN1_AM12H()		bfin_read16(CAN1_AM12H)
+#define bfin_write_CAN1_AM12H(val)	bfin_write16(CAN1_AM12H, val)
+#define bfin_read_CAN1_AM13L()		bfin_read16(CAN1_AM13L)
+#define bfin_write_CAN1_AM13L(val)	bfin_write16(CAN1_AM13L, val)
+#define bfin_read_CAN1_AM13H()		bfin_read16(CAN1_AM13H)
+#define bfin_write_CAN1_AM13H(val)	bfin_write16(CAN1_AM13H, val)
+#define bfin_read_CAN1_AM14L()		bfin_read16(CAN1_AM14L)
+#define bfin_write_CAN1_AM14L(val)	bfin_write16(CAN1_AM14L, val)
+#define bfin_read_CAN1_AM14H()		bfin_read16(CAN1_AM14H)
+#define bfin_write_CAN1_AM14H(val)	bfin_write16(CAN1_AM14H, val)
+#define bfin_read_CAN1_AM15L()		bfin_read16(CAN1_AM15L)
+#define bfin_write_CAN1_AM15L(val)	bfin_write16(CAN1_AM15L, val)
+#define bfin_read_CAN1_AM15H()		bfin_read16(CAN1_AM15H)
+#define bfin_write_CAN1_AM15H(val)	bfin_write16(CAN1_AM15H, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM16L()		bfin_read16(CAN1_AM16L)
+#define bfin_write_CAN1_AM16L(val)	bfin_write16(CAN1_AM16L, val)
+#define bfin_read_CAN1_AM16H()		bfin_read16(CAN1_AM16H)
+#define bfin_write_CAN1_AM16H(val)	bfin_write16(CAN1_AM16H, val)
+#define bfin_read_CAN1_AM17L()		bfin_read16(CAN1_AM17L)
+#define bfin_write_CAN1_AM17L(val)	bfin_write16(CAN1_AM17L, val)
+#define bfin_read_CAN1_AM17H()		bfin_read16(CAN1_AM17H)
+#define bfin_write_CAN1_AM17H(val)	bfin_write16(CAN1_AM17H, val)
+#define bfin_read_CAN1_AM18L()		bfin_read16(CAN1_AM18L)
+#define bfin_write_CAN1_AM18L(val)	bfin_write16(CAN1_AM18L, val)
+#define bfin_read_CAN1_AM18H()		bfin_read16(CAN1_AM18H)
+#define bfin_write_CAN1_AM18H(val)	bfin_write16(CAN1_AM18H, val)
+#define bfin_read_CAN1_AM19L()		bfin_read16(CAN1_AM19L)
+#define bfin_write_CAN1_AM19L(val)	bfin_write16(CAN1_AM19L, val)
+#define bfin_read_CAN1_AM19H()		bfin_read16(CAN1_AM19H)
+#define bfin_write_CAN1_AM19H(val)	bfin_write16(CAN1_AM19H, val)
+#define bfin_read_CAN1_AM20L()		bfin_read16(CAN1_AM20L)
+#define bfin_write_CAN1_AM20L(val)	bfin_write16(CAN1_AM20L, val)
+#define bfin_read_CAN1_AM20H()		bfin_read16(CAN1_AM20H)
+#define bfin_write_CAN1_AM20H(val)	bfin_write16(CAN1_AM20H, val)
+#define bfin_read_CAN1_AM21L()		bfin_read16(CAN1_AM21L)
+#define bfin_write_CAN1_AM21L(val)	bfin_write16(CAN1_AM21L, val)
+#define bfin_read_CAN1_AM21H()		bfin_read16(CAN1_AM21H)
+#define bfin_write_CAN1_AM21H(val)	bfin_write16(CAN1_AM21H, val)
+#define bfin_read_CAN1_AM22L()		bfin_read16(CAN1_AM22L)
+#define bfin_write_CAN1_AM22L(val)	bfin_write16(CAN1_AM22L, val)
+#define bfin_read_CAN1_AM22H()		bfin_read16(CAN1_AM22H)
+#define bfin_write_CAN1_AM22H(val)	bfin_write16(CAN1_AM22H, val)
+#define bfin_read_CAN1_AM23L()		bfin_read16(CAN1_AM23L)
+#define bfin_write_CAN1_AM23L(val)	bfin_write16(CAN1_AM23L, val)
+#define bfin_read_CAN1_AM23H()		bfin_read16(CAN1_AM23H)
+#define bfin_write_CAN1_AM23H(val)	bfin_write16(CAN1_AM23H, val)
+#define bfin_read_CAN1_AM24L()		bfin_read16(CAN1_AM24L)
+#define bfin_write_CAN1_AM24L(val)	bfin_write16(CAN1_AM24L, val)
+#define bfin_read_CAN1_AM24H()		bfin_read16(CAN1_AM24H)
+#define bfin_write_CAN1_AM24H(val)	bfin_write16(CAN1_AM24H, val)
+#define bfin_read_CAN1_AM25L()		bfin_read16(CAN1_AM25L)
+#define bfin_write_CAN1_AM25L(val)	bfin_write16(CAN1_AM25L, val)
+#define bfin_read_CAN1_AM25H()		bfin_read16(CAN1_AM25H)
+#define bfin_write_CAN1_AM25H(val)	bfin_write16(CAN1_AM25H, val)
+#define bfin_read_CAN1_AM26L()		bfin_read16(CAN1_AM26L)
+#define bfin_write_CAN1_AM26L(val)	bfin_write16(CAN1_AM26L, val)
+#define bfin_read_CAN1_AM26H()		bfin_read16(CAN1_AM26H)
+#define bfin_write_CAN1_AM26H(val)	bfin_write16(CAN1_AM26H, val)
+#define bfin_read_CAN1_AM27L()		bfin_read16(CAN1_AM27L)
+#define bfin_write_CAN1_AM27L(val)	bfin_write16(CAN1_AM27L, val)
+#define bfin_read_CAN1_AM27H()		bfin_read16(CAN1_AM27H)
+#define bfin_write_CAN1_AM27H(val)	bfin_write16(CAN1_AM27H, val)
+#define bfin_read_CAN1_AM28L()		bfin_read16(CAN1_AM28L)
+#define bfin_write_CAN1_AM28L(val)	bfin_write16(CAN1_AM28L, val)
+#define bfin_read_CAN1_AM28H()		bfin_read16(CAN1_AM28H)
+#define bfin_write_CAN1_AM28H(val)	bfin_write16(CAN1_AM28H, val)
+#define bfin_read_CAN1_AM29L()		bfin_read16(CAN1_AM29L)
+#define bfin_write_CAN1_AM29L(val)	bfin_write16(CAN1_AM29L, val)
+#define bfin_read_CAN1_AM29H()		bfin_read16(CAN1_AM29H)
+#define bfin_write_CAN1_AM29H(val)	bfin_write16(CAN1_AM29H, val)
+#define bfin_read_CAN1_AM30L()		bfin_read16(CAN1_AM30L)
+#define bfin_write_CAN1_AM30L(val)	bfin_write16(CAN1_AM30L, val)
+#define bfin_read_CAN1_AM30H()		bfin_read16(CAN1_AM30H)
+#define bfin_write_CAN1_AM30H(val)	bfin_write16(CAN1_AM30H, val)
+#define bfin_read_CAN1_AM31L()		bfin_read16(CAN1_AM31L)
+#define bfin_write_CAN1_AM31L(val)	bfin_write16(CAN1_AM31L, val)
+#define bfin_read_CAN1_AM31H()		bfin_read16(CAN1_AM31H)
+#define bfin_write_CAN1_AM31H(val)	bfin_write16(CAN1_AM31H, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB00_DATA0()		bfin_read16(CAN1_MB00_DATA0)
+#define bfin_write_CAN1_MB00_DATA0(val)		bfin_write16(CAN1_MB00_DATA0, val)
+#define bfin_read_CAN1_MB00_DATA1()		bfin_read16(CAN1_MB00_DATA1)
+#define bfin_write_CAN1_MB00_DATA1(val)		bfin_write16(CAN1_MB00_DATA1, val)
+#define bfin_read_CAN1_MB00_DATA2()		bfin_read16(CAN1_MB00_DATA2)
+#define bfin_write_CAN1_MB00_DATA2(val)		bfin_write16(CAN1_MB00_DATA2, val)
+#define bfin_read_CAN1_MB00_DATA3()		bfin_read16(CAN1_MB00_DATA3)
+#define bfin_write_CAN1_MB00_DATA3(val)		bfin_write16(CAN1_MB00_DATA3, val)
+#define bfin_read_CAN1_MB00_LENGTH()		bfin_read16(CAN1_MB00_LENGTH)
+#define bfin_write_CAN1_MB00_LENGTH(val)	bfin_write16(CAN1_MB00_LENGTH, val)
+#define bfin_read_CAN1_MB00_TIMESTAMP()		bfin_read16(CAN1_MB00_TIMESTAMP)
+#define bfin_write_CAN1_MB00_TIMESTAMP(val)	bfin_write16(CAN1_MB00_TIMESTAMP, val)
+#define bfin_read_CAN1_MB00_ID0()		bfin_read16(CAN1_MB00_ID0)
+#define bfin_write_CAN1_MB00_ID0(val)		bfin_write16(CAN1_MB00_ID0, val)
+#define bfin_read_CAN1_MB00_ID1()		bfin_read16(CAN1_MB00_ID1)
+#define bfin_write_CAN1_MB00_ID1(val)		bfin_write16(CAN1_MB00_ID1, val)
+#define bfin_read_CAN1_MB01_DATA0()		bfin_read16(CAN1_MB01_DATA0)
+#define bfin_write_CAN1_MB01_DATA0(val)		bfin_write16(CAN1_MB01_DATA0, val)
+#define bfin_read_CAN1_MB01_DATA1()		bfin_read16(CAN1_MB01_DATA1)
+#define bfin_write_CAN1_MB01_DATA1(val)		bfin_write16(CAN1_MB01_DATA1, val)
+#define bfin_read_CAN1_MB01_DATA2()		bfin_read16(CAN1_MB01_DATA2)
+#define bfin_write_CAN1_MB01_DATA2(val)		bfin_write16(CAN1_MB01_DATA2, val)
+#define bfin_read_CAN1_MB01_DATA3()		bfin_read16(CAN1_MB01_DATA3)
+#define bfin_write_CAN1_MB01_DATA3(val)		bfin_write16(CAN1_MB01_DATA3, val)
+#define bfin_read_CAN1_MB01_LENGTH()		bfin_read16(CAN1_MB01_LENGTH)
+#define bfin_write_CAN1_MB01_LENGTH(val)	bfin_write16(CAN1_MB01_LENGTH, val)
+#define bfin_read_CAN1_MB01_TIMESTAMP()		bfin_read16(CAN1_MB01_TIMESTAMP)
+#define bfin_write_CAN1_MB01_TIMESTAMP(val)	bfin_write16(CAN1_MB01_TIMESTAMP, val)
+#define bfin_read_CAN1_MB01_ID0()		bfin_read16(CAN1_MB01_ID0)
+#define bfin_write_CAN1_MB01_ID0(val)		bfin_write16(CAN1_MB01_ID0, val)
+#define bfin_read_CAN1_MB01_ID1()		bfin_read16(CAN1_MB01_ID1)
+#define bfin_write_CAN1_MB01_ID1(val)		bfin_write16(CAN1_MB01_ID1, val)
+#define bfin_read_CAN1_MB02_DATA0()		bfin_read16(CAN1_MB02_DATA0)
+#define bfin_write_CAN1_MB02_DATA0(val)		bfin_write16(CAN1_MB02_DATA0, val)
+#define bfin_read_CAN1_MB02_DATA1()		bfin_read16(CAN1_MB02_DATA1)
+#define bfin_write_CAN1_MB02_DATA1(val)		bfin_write16(CAN1_MB02_DATA1, val)
+#define bfin_read_CAN1_MB02_DATA2()		bfin_read16(CAN1_MB02_DATA2)
+#define bfin_write_CAN1_MB02_DATA2(val)		bfin_write16(CAN1_MB02_DATA2, val)
+#define bfin_read_CAN1_MB02_DATA3()		bfin_read16(CAN1_MB02_DATA3)
+#define bfin_write_CAN1_MB02_DATA3(val)		bfin_write16(CAN1_MB02_DATA3, val)
+#define bfin_read_CAN1_MB02_LENGTH()		bfin_read16(CAN1_MB02_LENGTH)
+#define bfin_write_CAN1_MB02_LENGTH(val)	bfin_write16(CAN1_MB02_LENGTH, val)
+#define bfin_read_CAN1_MB02_TIMESTAMP()		bfin_read16(CAN1_MB02_TIMESTAMP)
+#define bfin_write_CAN1_MB02_TIMESTAMP(val)	bfin_write16(CAN1_MB02_TIMESTAMP, val)
+#define bfin_read_CAN1_MB02_ID0()		bfin_read16(CAN1_MB02_ID0)
+#define bfin_write_CAN1_MB02_ID0(val)		bfin_write16(CAN1_MB02_ID0, val)
+#define bfin_read_CAN1_MB02_ID1()		bfin_read16(CAN1_MB02_ID1)
+#define bfin_write_CAN1_MB02_ID1(val)		bfin_write16(CAN1_MB02_ID1, val)
+#define bfin_read_CAN1_MB03_DATA0()		bfin_read16(CAN1_MB03_DATA0)
+#define bfin_write_CAN1_MB03_DATA0(val)		bfin_write16(CAN1_MB03_DATA0, val)
+#define bfin_read_CAN1_MB03_DATA1()		bfin_read16(CAN1_MB03_DATA1)
+#define bfin_write_CAN1_MB03_DATA1(val)		bfin_write16(CAN1_MB03_DATA1, val)
+#define bfin_read_CAN1_MB03_DATA2()		bfin_read16(CAN1_MB03_DATA2)
+#define bfin_write_CAN1_MB03_DATA2(val)		bfin_write16(CAN1_MB03_DATA2, val)
+#define bfin_read_CAN1_MB03_DATA3()		bfin_read16(CAN1_MB03_DATA3)
+#define bfin_write_CAN1_MB03_DATA3(val)		bfin_write16(CAN1_MB03_DATA3, val)
+#define bfin_read_CAN1_MB03_LENGTH()		bfin_read16(CAN1_MB03_LENGTH)
+#define bfin_write_CAN1_MB03_LENGTH(val)	bfin_write16(CAN1_MB03_LENGTH, val)
+#define bfin_read_CAN1_MB03_TIMESTAMP()		bfin_read16(CAN1_MB03_TIMESTAMP)
+#define bfin_write_CAN1_MB03_TIMESTAMP(val)	bfin_write16(CAN1_MB03_TIMESTAMP, val)
+#define bfin_read_CAN1_MB03_ID0()		bfin_read16(CAN1_MB03_ID0)
+#define bfin_write_CAN1_MB03_ID0(val)		bfin_write16(CAN1_MB03_ID0, val)
+#define bfin_read_CAN1_MB03_ID1()		bfin_read16(CAN1_MB03_ID1)
+#define bfin_write_CAN1_MB03_ID1(val)		bfin_write16(CAN1_MB03_ID1, val)
+#define bfin_read_CAN1_MB04_DATA0()		bfin_read16(CAN1_MB04_DATA0)
+#define bfin_write_CAN1_MB04_DATA0(val)		bfin_write16(CAN1_MB04_DATA0, val)
+#define bfin_read_CAN1_MB04_DATA1()		bfin_read16(CAN1_MB04_DATA1)
+#define bfin_write_CAN1_MB04_DATA1(val)		bfin_write16(CAN1_MB04_DATA1, val)
+#define bfin_read_CAN1_MB04_DATA2()		bfin_read16(CAN1_MB04_DATA2)
+#define bfin_write_CAN1_MB04_DATA2(val)		bfin_write16(CAN1_MB04_DATA2, val)
+#define bfin_read_CAN1_MB04_DATA3()		bfin_read16(CAN1_MB04_DATA3)
+#define bfin_write_CAN1_MB04_DATA3(val)		bfin_write16(CAN1_MB04_DATA3, val)
+#define bfin_read_CAN1_MB04_LENGTH()		bfin_read16(CAN1_MB04_LENGTH)
+#define bfin_write_CAN1_MB04_LENGTH(val)	bfin_write16(CAN1_MB04_LENGTH, val)
+#define bfin_read_CAN1_MB04_TIMESTAMP()		bfin_read16(CAN1_MB04_TIMESTAMP)
+#define bfin_write_CAN1_MB04_TIMESTAMP(val)	bfin_write16(CAN1_MB04_TIMESTAMP, val)
+#define bfin_read_CAN1_MB04_ID0()		bfin_read16(CAN1_MB04_ID0)
+#define bfin_write_CAN1_MB04_ID0(val)		bfin_write16(CAN1_MB04_ID0, val)
+#define bfin_read_CAN1_MB04_ID1()		bfin_read16(CAN1_MB04_ID1)
+#define bfin_write_CAN1_MB04_ID1(val)		bfin_write16(CAN1_MB04_ID1, val)
+#define bfin_read_CAN1_MB05_DATA0()		bfin_read16(CAN1_MB05_DATA0)
+#define bfin_write_CAN1_MB05_DATA0(val)		bfin_write16(CAN1_MB05_DATA0, val)
+#define bfin_read_CAN1_MB05_DATA1()		bfin_read16(CAN1_MB05_DATA1)
+#define bfin_write_CAN1_MB05_DATA1(val)		bfin_write16(CAN1_MB05_DATA1, val)
+#define bfin_read_CAN1_MB05_DATA2()		bfin_read16(CAN1_MB05_DATA2)
+#define bfin_write_CAN1_MB05_DATA2(val)		bfin_write16(CAN1_MB05_DATA2, val)
+#define bfin_read_CAN1_MB05_DATA3()		bfin_read16(CAN1_MB05_DATA3)
+#define bfin_write_CAN1_MB05_DATA3(val)		bfin_write16(CAN1_MB05_DATA3, val)
+#define bfin_read_CAN1_MB05_LENGTH()		bfin_read16(CAN1_MB05_LENGTH)
+#define bfin_write_CAN1_MB05_LENGTH(val)	bfin_write16(CAN1_MB05_LENGTH, val)
+#define bfin_read_CAN1_MB05_TIMESTAMP()		bfin_read16(CAN1_MB05_TIMESTAMP)
+#define bfin_write_CAN1_MB05_TIMESTAMP(val)	bfin_write16(CAN1_MB05_TIMESTAMP, val)
+#define bfin_read_CAN1_MB05_ID0()		bfin_read16(CAN1_MB05_ID0)
+#define bfin_write_CAN1_MB05_ID0(val)		bfin_write16(CAN1_MB05_ID0, val)
+#define bfin_read_CAN1_MB05_ID1()		bfin_read16(CAN1_MB05_ID1)
+#define bfin_write_CAN1_MB05_ID1(val)		bfin_write16(CAN1_MB05_ID1, val)
+#define bfin_read_CAN1_MB06_DATA0()		bfin_read16(CAN1_MB06_DATA0)
+#define bfin_write_CAN1_MB06_DATA0(val)		bfin_write16(CAN1_MB06_DATA0, val)
+#define bfin_read_CAN1_MB06_DATA1()		bfin_read16(CAN1_MB06_DATA1)
+#define bfin_write_CAN1_MB06_DATA1(val)		bfin_write16(CAN1_MB06_DATA1, val)
+#define bfin_read_CAN1_MB06_DATA2()		bfin_read16(CAN1_MB06_DATA2)
+#define bfin_write_CAN1_MB06_DATA2(val)		bfin_write16(CAN1_MB06_DATA2, val)
+#define bfin_read_CAN1_MB06_DATA3()		bfin_read16(CAN1_MB06_DATA3)
+#define bfin_write_CAN1_MB06_DATA3(val)		bfin_write16(CAN1_MB06_DATA3, val)
+#define bfin_read_CAN1_MB06_LENGTH()		bfin_read16(CAN1_MB06_LENGTH)
+#define bfin_write_CAN1_MB06_LENGTH(val)	bfin_write16(CAN1_MB06_LENGTH, val)
+#define bfin_read_CAN1_MB06_TIMESTAMP()		bfin_read16(CAN1_MB06_TIMESTAMP)
+#define bfin_write_CAN1_MB06_TIMESTAMP(val)	bfin_write16(CAN1_MB06_TIMESTAMP, val)
+#define bfin_read_CAN1_MB06_ID0()		bfin_read16(CAN1_MB06_ID0)
+#define bfin_write_CAN1_MB06_ID0(val)		bfin_write16(CAN1_MB06_ID0, val)
+#define bfin_read_CAN1_MB06_ID1()		bfin_read16(CAN1_MB06_ID1)
+#define bfin_write_CAN1_MB06_ID1(val)		bfin_write16(CAN1_MB06_ID1, val)
+#define bfin_read_CAN1_MB07_DATA0()		bfin_read16(CAN1_MB07_DATA0)
+#define bfin_write_CAN1_MB07_DATA0(val)		bfin_write16(CAN1_MB07_DATA0, val)
+#define bfin_read_CAN1_MB07_DATA1()		bfin_read16(CAN1_MB07_DATA1)
+#define bfin_write_CAN1_MB07_DATA1(val)		bfin_write16(CAN1_MB07_DATA1, val)
+#define bfin_read_CAN1_MB07_DATA2()		bfin_read16(CAN1_MB07_DATA2)
+#define bfin_write_CAN1_MB07_DATA2(val)		bfin_write16(CAN1_MB07_DATA2, val)
+#define bfin_read_CAN1_MB07_DATA3()		bfin_read16(CAN1_MB07_DATA3)
+#define bfin_write_CAN1_MB07_DATA3(val)		bfin_write16(CAN1_MB07_DATA3, val)
+#define bfin_read_CAN1_MB07_LENGTH()		bfin_read16(CAN1_MB07_LENGTH)
+#define bfin_write_CAN1_MB07_LENGTH(val)	bfin_write16(CAN1_MB07_LENGTH, val)
+#define bfin_read_CAN1_MB07_TIMESTAMP()		bfin_read16(CAN1_MB07_TIMESTAMP)
+#define bfin_write_CAN1_MB07_TIMESTAMP(val)	bfin_write16(CAN1_MB07_TIMESTAMP, val)
+#define bfin_read_CAN1_MB07_ID0()		bfin_read16(CAN1_MB07_ID0)
+#define bfin_write_CAN1_MB07_ID0(val)		bfin_write16(CAN1_MB07_ID0, val)
+#define bfin_read_CAN1_MB07_ID1()		bfin_read16(CAN1_MB07_ID1)
+#define bfin_write_CAN1_MB07_ID1(val)		bfin_write16(CAN1_MB07_ID1, val)
+#define bfin_read_CAN1_MB08_DATA0()		bfin_read16(CAN1_MB08_DATA0)
+#define bfin_write_CAN1_MB08_DATA0(val)		bfin_write16(CAN1_MB08_DATA0, val)
+#define bfin_read_CAN1_MB08_DATA1()		bfin_read16(CAN1_MB08_DATA1)
+#define bfin_write_CAN1_MB08_DATA1(val)		bfin_write16(CAN1_MB08_DATA1, val)
+#define bfin_read_CAN1_MB08_DATA2()		bfin_read16(CAN1_MB08_DATA2)
+#define bfin_write_CAN1_MB08_DATA2(val)		bfin_write16(CAN1_MB08_DATA2, val)
+#define bfin_read_CAN1_MB08_DATA3()		bfin_read16(CAN1_MB08_DATA3)
+#define bfin_write_CAN1_MB08_DATA3(val)		bfin_write16(CAN1_MB08_DATA3, val)
+#define bfin_read_CAN1_MB08_LENGTH()		bfin_read16(CAN1_MB08_LENGTH)
+#define bfin_write_CAN1_MB08_LENGTH(val)	bfin_write16(CAN1_MB08_LENGTH, val)
+#define bfin_read_CAN1_MB08_TIMESTAMP()		bfin_read16(CAN1_MB08_TIMESTAMP)
+#define bfin_write_CAN1_MB08_TIMESTAMP(val)	bfin_write16(CAN1_MB08_TIMESTAMP, val)
+#define bfin_read_CAN1_MB08_ID0()		bfin_read16(CAN1_MB08_ID0)
+#define bfin_write_CAN1_MB08_ID0(val)		bfin_write16(CAN1_MB08_ID0, val)
+#define bfin_read_CAN1_MB08_ID1()		bfin_read16(CAN1_MB08_ID1)
+#define bfin_write_CAN1_MB08_ID1(val)		bfin_write16(CAN1_MB08_ID1, val)
+#define bfin_read_CAN1_MB09_DATA0()		bfin_read16(CAN1_MB09_DATA0)
+#define bfin_write_CAN1_MB09_DATA0(val)		bfin_write16(CAN1_MB09_DATA0, val)
+#define bfin_read_CAN1_MB09_DATA1()		bfin_read16(CAN1_MB09_DATA1)
+#define bfin_write_CAN1_MB09_DATA1(val)		bfin_write16(CAN1_MB09_DATA1, val)
+#define bfin_read_CAN1_MB09_DATA2()		bfin_read16(CAN1_MB09_DATA2)
+#define bfin_write_CAN1_MB09_DATA2(val)		bfin_write16(CAN1_MB09_DATA2, val)
+#define bfin_read_CAN1_MB09_DATA3()		bfin_read16(CAN1_MB09_DATA3)
+#define bfin_write_CAN1_MB09_DATA3(val)		bfin_write16(CAN1_MB09_DATA3, val)
+#define bfin_read_CAN1_MB09_LENGTH()		bfin_read16(CAN1_MB09_LENGTH)
+#define bfin_write_CAN1_MB09_LENGTH(val)	bfin_write16(CAN1_MB09_LENGTH, val)
+#define bfin_read_CAN1_MB09_TIMESTAMP()		bfin_read16(CAN1_MB09_TIMESTAMP)
+#define bfin_write_CAN1_MB09_TIMESTAMP(val)	bfin_write16(CAN1_MB09_TIMESTAMP, val)
+#define bfin_read_CAN1_MB09_ID0()		bfin_read16(CAN1_MB09_ID0)
+#define bfin_write_CAN1_MB09_ID0(val)		bfin_write16(CAN1_MB09_ID0, val)
+#define bfin_read_CAN1_MB09_ID1()		bfin_read16(CAN1_MB09_ID1)
+#define bfin_write_CAN1_MB09_ID1(val)		bfin_write16(CAN1_MB09_ID1, val)
+#define bfin_read_CAN1_MB10_DATA0()		bfin_read16(CAN1_MB10_DATA0)
+#define bfin_write_CAN1_MB10_DATA0(val)		bfin_write16(CAN1_MB10_DATA0, val)
+#define bfin_read_CAN1_MB10_DATA1()		bfin_read16(CAN1_MB10_DATA1)
+#define bfin_write_CAN1_MB10_DATA1(val)		bfin_write16(CAN1_MB10_DATA1, val)
+#define bfin_read_CAN1_MB10_DATA2()		bfin_read16(CAN1_MB10_DATA2)
+#define bfin_write_CAN1_MB10_DATA2(val)		bfin_write16(CAN1_MB10_DATA2, val)
+#define bfin_read_CAN1_MB10_DATA3()		bfin_read16(CAN1_MB10_DATA3)
+#define bfin_write_CAN1_MB10_DATA3(val)		bfin_write16(CAN1_MB10_DATA3, val)
+#define bfin_read_CAN1_MB10_LENGTH()		bfin_read16(CAN1_MB10_LENGTH)
+#define bfin_write_CAN1_MB10_LENGTH(val)	bfin_write16(CAN1_MB10_LENGTH, val)
+#define bfin_read_CAN1_MB10_TIMESTAMP()		bfin_read16(CAN1_MB10_TIMESTAMP)
+#define bfin_write_CAN1_MB10_TIMESTAMP(val)	bfin_write16(CAN1_MB10_TIMESTAMP, val)
+#define bfin_read_CAN1_MB10_ID0()		bfin_read16(CAN1_MB10_ID0)
+#define bfin_write_CAN1_MB10_ID0(val)		bfin_write16(CAN1_MB10_ID0, val)
+#define bfin_read_CAN1_MB10_ID1()		bfin_read16(CAN1_MB10_ID1)
+#define bfin_write_CAN1_MB10_ID1(val)		bfin_write16(CAN1_MB10_ID1, val)
+#define bfin_read_CAN1_MB11_DATA0()		bfin_read16(CAN1_MB11_DATA0)
+#define bfin_write_CAN1_MB11_DATA0(val)		bfin_write16(CAN1_MB11_DATA0, val)
+#define bfin_read_CAN1_MB11_DATA1()		bfin_read16(CAN1_MB11_DATA1)
+#define bfin_write_CAN1_MB11_DATA1(val)		bfin_write16(CAN1_MB11_DATA1, val)
+#define bfin_read_CAN1_MB11_DATA2()		bfin_read16(CAN1_MB11_DATA2)
+#define bfin_write_CAN1_MB11_DATA2(val)		bfin_write16(CAN1_MB11_DATA2, val)
+#define bfin_read_CAN1_MB11_DATA3()		bfin_read16(CAN1_MB11_DATA3)
+#define bfin_write_CAN1_MB11_DATA3(val)		bfin_write16(CAN1_MB11_DATA3, val)
+#define bfin_read_CAN1_MB11_LENGTH()		bfin_read16(CAN1_MB11_LENGTH)
+#define bfin_write_CAN1_MB11_LENGTH(val)	bfin_write16(CAN1_MB11_LENGTH, val)
+#define bfin_read_CAN1_MB11_TIMESTAMP()		bfin_read16(CAN1_MB11_TIMESTAMP)
+#define bfin_write_CAN1_MB11_TIMESTAMP(val)	bfin_write16(CAN1_MB11_TIMESTAMP, val)
+#define bfin_read_CAN1_MB11_ID0()		bfin_read16(CAN1_MB11_ID0)
+#define bfin_write_CAN1_MB11_ID0(val)		bfin_write16(CAN1_MB11_ID0, val)
+#define bfin_read_CAN1_MB11_ID1()		bfin_read16(CAN1_MB11_ID1)
+#define bfin_write_CAN1_MB11_ID1(val)		bfin_write16(CAN1_MB11_ID1, val)
+#define bfin_read_CAN1_MB12_DATA0()		bfin_read16(CAN1_MB12_DATA0)
+#define bfin_write_CAN1_MB12_DATA0(val)		bfin_write16(CAN1_MB12_DATA0, val)
+#define bfin_read_CAN1_MB12_DATA1()		bfin_read16(CAN1_MB12_DATA1)
+#define bfin_write_CAN1_MB12_DATA1(val)		bfin_write16(CAN1_MB12_DATA1, val)
+#define bfin_read_CAN1_MB12_DATA2()		bfin_read16(CAN1_MB12_DATA2)
+#define bfin_write_CAN1_MB12_DATA2(val)		bfin_write16(CAN1_MB12_DATA2, val)
+#define bfin_read_CAN1_MB12_DATA3()		bfin_read16(CAN1_MB12_DATA3)
+#define bfin_write_CAN1_MB12_DATA3(val)		bfin_write16(CAN1_MB12_DATA3, val)
+#define bfin_read_CAN1_MB12_LENGTH()		bfin_read16(CAN1_MB12_LENGTH)
+#define bfin_write_CAN1_MB12_LENGTH(val)	bfin_write16(CAN1_MB12_LENGTH, val)
+#define bfin_read_CAN1_MB12_TIMESTAMP()		bfin_read16(CAN1_MB12_TIMESTAMP)
+#define bfin_write_CAN1_MB12_TIMESTAMP(val)	bfin_write16(CAN1_MB12_TIMESTAMP, val)
+#define bfin_read_CAN1_MB12_ID0()		bfin_read16(CAN1_MB12_ID0)
+#define bfin_write_CAN1_MB12_ID0(val)		bfin_write16(CAN1_MB12_ID0, val)
+#define bfin_read_CAN1_MB12_ID1()		bfin_read16(CAN1_MB12_ID1)
+#define bfin_write_CAN1_MB12_ID1(val)		bfin_write16(CAN1_MB12_ID1, val)
+#define bfin_read_CAN1_MB13_DATA0()		bfin_read16(CAN1_MB13_DATA0)
+#define bfin_write_CAN1_MB13_DATA0(val)		bfin_write16(CAN1_MB13_DATA0, val)
+#define bfin_read_CAN1_MB13_DATA1()		bfin_read16(CAN1_MB13_DATA1)
+#define bfin_write_CAN1_MB13_DATA1(val)		bfin_write16(CAN1_MB13_DATA1, val)
+#define bfin_read_CAN1_MB13_DATA2()		bfin_read16(CAN1_MB13_DATA2)
+#define bfin_write_CAN1_MB13_DATA2(val)		bfin_write16(CAN1_MB13_DATA2, val)
+#define bfin_read_CAN1_MB13_DATA3()		bfin_read16(CAN1_MB13_DATA3)
+#define bfin_write_CAN1_MB13_DATA3(val)		bfin_write16(CAN1_MB13_DATA3, val)
+#define bfin_read_CAN1_MB13_LENGTH()		bfin_read16(CAN1_MB13_LENGTH)
+#define bfin_write_CAN1_MB13_LENGTH(val)	bfin_write16(CAN1_MB13_LENGTH, val)
+#define bfin_read_CAN1_MB13_TIMESTAMP()		bfin_read16(CAN1_MB13_TIMESTAMP)
+#define bfin_write_CAN1_MB13_TIMESTAMP(val)	bfin_write16(CAN1_MB13_TIMESTAMP, val)
+#define bfin_read_CAN1_MB13_ID0()		bfin_read16(CAN1_MB13_ID0)
+#define bfin_write_CAN1_MB13_ID0(val)		bfin_write16(CAN1_MB13_ID0, val)
+#define bfin_read_CAN1_MB13_ID1()		bfin_read16(CAN1_MB13_ID1)
+#define bfin_write_CAN1_MB13_ID1(val)		bfin_write16(CAN1_MB13_ID1, val)
+#define bfin_read_CAN1_MB14_DATA0()		bfin_read16(CAN1_MB14_DATA0)
+#define bfin_write_CAN1_MB14_DATA0(val)		bfin_write16(CAN1_MB14_DATA0, val)
+#define bfin_read_CAN1_MB14_DATA1()		bfin_read16(CAN1_MB14_DATA1)
+#define bfin_write_CAN1_MB14_DATA1(val)		bfin_write16(CAN1_MB14_DATA1, val)
+#define bfin_read_CAN1_MB14_DATA2()		bfin_read16(CAN1_MB14_DATA2)
+#define bfin_write_CAN1_MB14_DATA2(val)		bfin_write16(CAN1_MB14_DATA2, val)
+#define bfin_read_CAN1_MB14_DATA3()		bfin_read16(CAN1_MB14_DATA3)
+#define bfin_write_CAN1_MB14_DATA3(val)		bfin_write16(CAN1_MB14_DATA3, val)
+#define bfin_read_CAN1_MB14_LENGTH()		bfin_read16(CAN1_MB14_LENGTH)
+#define bfin_write_CAN1_MB14_LENGTH(val)	bfin_write16(CAN1_MB14_LENGTH, val)
+#define bfin_read_CAN1_MB14_TIMESTAMP()		bfin_read16(CAN1_MB14_TIMESTAMP)
+#define bfin_write_CAN1_MB14_TIMESTAMP(val)	bfin_write16(CAN1_MB14_TIMESTAMP, val)
+#define bfin_read_CAN1_MB14_ID0()		bfin_read16(CAN1_MB14_ID0)
+#define bfin_write_CAN1_MB14_ID0(val)		bfin_write16(CAN1_MB14_ID0, val)
+#define bfin_read_CAN1_MB14_ID1()		bfin_read16(CAN1_MB14_ID1)
+#define bfin_write_CAN1_MB14_ID1(val)		bfin_write16(CAN1_MB14_ID1, val)
+#define bfin_read_CAN1_MB15_DATA0()		bfin_read16(CAN1_MB15_DATA0)
+#define bfin_write_CAN1_MB15_DATA0(val)		bfin_write16(CAN1_MB15_DATA0, val)
+#define bfin_read_CAN1_MB15_DATA1()		bfin_read16(CAN1_MB15_DATA1)
+#define bfin_write_CAN1_MB15_DATA1(val)		bfin_write16(CAN1_MB15_DATA1, val)
+#define bfin_read_CAN1_MB15_DATA2()		bfin_read16(CAN1_MB15_DATA2)
+#define bfin_write_CAN1_MB15_DATA2(val)		bfin_write16(CAN1_MB15_DATA2, val)
+#define bfin_read_CAN1_MB15_DATA3()		bfin_read16(CAN1_MB15_DATA3)
+#define bfin_write_CAN1_MB15_DATA3(val)		bfin_write16(CAN1_MB15_DATA3, val)
+#define bfin_read_CAN1_MB15_LENGTH()		bfin_read16(CAN1_MB15_LENGTH)
+#define bfin_write_CAN1_MB15_LENGTH(val)	bfin_write16(CAN1_MB15_LENGTH, val)
+#define bfin_read_CAN1_MB15_TIMESTAMP()		bfin_read16(CAN1_MB15_TIMESTAMP)
+#define bfin_write_CAN1_MB15_TIMESTAMP(val)	bfin_write16(CAN1_MB15_TIMESTAMP, val)
+#define bfin_read_CAN1_MB15_ID0()		bfin_read16(CAN1_MB15_ID0)
+#define bfin_write_CAN1_MB15_ID0(val)		bfin_write16(CAN1_MB15_ID0, val)
+#define bfin_read_CAN1_MB15_ID1()		bfin_read16(CAN1_MB15_ID1)
+#define bfin_write_CAN1_MB15_ID1(val)		bfin_write16(CAN1_MB15_ID1, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB16_DATA0()		bfin_read16(CAN1_MB16_DATA0)
+#define bfin_write_CAN1_MB16_DATA0(val)		bfin_write16(CAN1_MB16_DATA0, val)
+#define bfin_read_CAN1_MB16_DATA1()		bfin_read16(CAN1_MB16_DATA1)
+#define bfin_write_CAN1_MB16_DATA1(val)		bfin_write16(CAN1_MB16_DATA1, val)
+#define bfin_read_CAN1_MB16_DATA2()		bfin_read16(CAN1_MB16_DATA2)
+#define bfin_write_CAN1_MB16_DATA2(val)		bfin_write16(CAN1_MB16_DATA2, val)
+#define bfin_read_CAN1_MB16_DATA3()		bfin_read16(CAN1_MB16_DATA3)
+#define bfin_write_CAN1_MB16_DATA3(val)		bfin_write16(CAN1_MB16_DATA3, val)
+#define bfin_read_CAN1_MB16_LENGTH()		bfin_read16(CAN1_MB16_LENGTH)
+#define bfin_write_CAN1_MB16_LENGTH(val)	bfin_write16(CAN1_MB16_LENGTH, val)
+#define bfin_read_CAN1_MB16_TIMESTAMP()		bfin_read16(CAN1_MB16_TIMESTAMP)
+#define bfin_write_CAN1_MB16_TIMESTAMP(val)	bfin_write16(CAN1_MB16_TIMESTAMP, val)
+#define bfin_read_CAN1_MB16_ID0()		bfin_read16(CAN1_MB16_ID0)
+#define bfin_write_CAN1_MB16_ID0(val)		bfin_write16(CAN1_MB16_ID0, val)
+#define bfin_read_CAN1_MB16_ID1()		bfin_read16(CAN1_MB16_ID1)
+#define bfin_write_CAN1_MB16_ID1(val)		bfin_write16(CAN1_MB16_ID1, val)
+#define bfin_read_CAN1_MB17_DATA0()		bfin_read16(CAN1_MB17_DATA0)
+#define bfin_write_CAN1_MB17_DATA0(val)		bfin_write16(CAN1_MB17_DATA0, val)
+#define bfin_read_CAN1_MB17_DATA1()		bfin_read16(CAN1_MB17_DATA1)
+#define bfin_write_CAN1_MB17_DATA1(val)		bfin_write16(CAN1_MB17_DATA1, val)
+#define bfin_read_CAN1_MB17_DATA2()		bfin_read16(CAN1_MB17_DATA2)
+#define bfin_write_CAN1_MB17_DATA2(val)		bfin_write16(CAN1_MB17_DATA2, val)
+#define bfin_read_CAN1_MB17_DATA3()		bfin_read16(CAN1_MB17_DATA3)
+#define bfin_write_CAN1_MB17_DATA3(val)		bfin_write16(CAN1_MB17_DATA3, val)
+#define bfin_read_CAN1_MB17_LENGTH()		bfin_read16(CAN1_MB17_LENGTH)
+#define bfin_write_CAN1_MB17_LENGTH(val)	bfin_write16(CAN1_MB17_LENGTH, val)
+#define bfin_read_CAN1_MB17_TIMESTAMP()		bfin_read16(CAN1_MB17_TIMESTAMP)
+#define bfin_write_CAN1_MB17_TIMESTAMP(val)	bfin_write16(CAN1_MB17_TIMESTAMP, val)
+#define bfin_read_CAN1_MB17_ID0()		bfin_read16(CAN1_MB17_ID0)
+#define bfin_write_CAN1_MB17_ID0(val)		bfin_write16(CAN1_MB17_ID0, val)
+#define bfin_read_CAN1_MB17_ID1()		bfin_read16(CAN1_MB17_ID1)
+#define bfin_write_CAN1_MB17_ID1(val)		bfin_write16(CAN1_MB17_ID1, val)
+#define bfin_read_CAN1_MB18_DATA0()		bfin_read16(CAN1_MB18_DATA0)
+#define bfin_write_CAN1_MB18_DATA0(val)		bfin_write16(CAN1_MB18_DATA0, val)
+#define bfin_read_CAN1_MB18_DATA1()		bfin_read16(CAN1_MB18_DATA1)
+#define bfin_write_CAN1_MB18_DATA1(val)		bfin_write16(CAN1_MB18_DATA1, val)
+#define bfin_read_CAN1_MB18_DATA2()		bfin_read16(CAN1_MB18_DATA2)
+#define bfin_write_CAN1_MB18_DATA2(val)		bfin_write16(CAN1_MB18_DATA2, val)
+#define bfin_read_CAN1_MB18_DATA3()		bfin_read16(CAN1_MB18_DATA3)
+#define bfin_write_CAN1_MB18_DATA3(val)		bfin_write16(CAN1_MB18_DATA3, val)
+#define bfin_read_CAN1_MB18_LENGTH()		bfin_read16(CAN1_MB18_LENGTH)
+#define bfin_write_CAN1_MB18_LENGTH(val)	bfin_write16(CAN1_MB18_LENGTH, val)
+#define bfin_read_CAN1_MB18_TIMESTAMP()		bfin_read16(CAN1_MB18_TIMESTAMP)
+#define bfin_write_CAN1_MB18_TIMESTAMP(val)	bfin_write16(CAN1_MB18_TIMESTAMP, val)
+#define bfin_read_CAN1_MB18_ID0()		bfin_read16(CAN1_MB18_ID0)
+#define bfin_write_CAN1_MB18_ID0(val)		bfin_write16(CAN1_MB18_ID0, val)
+#define bfin_read_CAN1_MB18_ID1()		bfin_read16(CAN1_MB18_ID1)
+#define bfin_write_CAN1_MB18_ID1(val)		bfin_write16(CAN1_MB18_ID1, val)
+#define bfin_read_CAN1_MB19_DATA0()		bfin_read16(CAN1_MB19_DATA0)
+#define bfin_write_CAN1_MB19_DATA0(val)		bfin_write16(CAN1_MB19_DATA0, val)
+#define bfin_read_CAN1_MB19_DATA1()		bfin_read16(CAN1_MB19_DATA1)
+#define bfin_write_CAN1_MB19_DATA1(val)		bfin_write16(CAN1_MB19_DATA1, val)
+#define bfin_read_CAN1_MB19_DATA2()		bfin_read16(CAN1_MB19_DATA2)
+#define bfin_write_CAN1_MB19_DATA2(val)		bfin_write16(CAN1_MB19_DATA2, val)
+#define bfin_read_CAN1_MB19_DATA3()		bfin_read16(CAN1_MB19_DATA3)
+#define bfin_write_CAN1_MB19_DATA3(val)		bfin_write16(CAN1_MB19_DATA3, val)
+#define bfin_read_CAN1_MB19_LENGTH()		bfin_read16(CAN1_MB19_LENGTH)
+#define bfin_write_CAN1_MB19_LENGTH(val)	bfin_write16(CAN1_MB19_LENGTH, val)
+#define bfin_read_CAN1_MB19_TIMESTAMP()		bfin_read16(CAN1_MB19_TIMESTAMP)
+#define bfin_write_CAN1_MB19_TIMESTAMP(val)	bfin_write16(CAN1_MB19_TIMESTAMP, val)
+#define bfin_read_CAN1_MB19_ID0()		bfin_read16(CAN1_MB19_ID0)
+#define bfin_write_CAN1_MB19_ID0(val)		bfin_write16(CAN1_MB19_ID0, val)
+#define bfin_read_CAN1_MB19_ID1()		bfin_read16(CAN1_MB19_ID1)
+#define bfin_write_CAN1_MB19_ID1(val)		bfin_write16(CAN1_MB19_ID1, val)
+#define bfin_read_CAN1_MB20_DATA0()		bfin_read16(CAN1_MB20_DATA0)
+#define bfin_write_CAN1_MB20_DATA0(val)		bfin_write16(CAN1_MB20_DATA0, val)
+#define bfin_read_CAN1_MB20_DATA1()		bfin_read16(CAN1_MB20_DATA1)
+#define bfin_write_CAN1_MB20_DATA1(val)		bfin_write16(CAN1_MB20_DATA1, val)
+#define bfin_read_CAN1_MB20_DATA2()		bfin_read16(CAN1_MB20_DATA2)
+#define bfin_write_CAN1_MB20_DATA2(val)		bfin_write16(CAN1_MB20_DATA2, val)
+#define bfin_read_CAN1_MB20_DATA3()		bfin_read16(CAN1_MB20_DATA3)
+#define bfin_write_CAN1_MB20_DATA3(val)		bfin_write16(CAN1_MB20_DATA3, val)
+#define bfin_read_CAN1_MB20_LENGTH()		bfin_read16(CAN1_MB20_LENGTH)
+#define bfin_write_CAN1_MB20_LENGTH(val)	bfin_write16(CAN1_MB20_LENGTH, val)
+#define bfin_read_CAN1_MB20_TIMESTAMP()		bfin_read16(CAN1_MB20_TIMESTAMP)
+#define bfin_write_CAN1_MB20_TIMESTAMP(val)	bfin_write16(CAN1_MB20_TIMESTAMP, val)
+#define bfin_read_CAN1_MB20_ID0()		bfin_read16(CAN1_MB20_ID0)
+#define bfin_write_CAN1_MB20_ID0(val)		bfin_write16(CAN1_MB20_ID0, val)
+#define bfin_read_CAN1_MB20_ID1()		bfin_read16(CAN1_MB20_ID1)
+#define bfin_write_CAN1_MB20_ID1(val)		bfin_write16(CAN1_MB20_ID1, val)
+#define bfin_read_CAN1_MB21_DATA0()		bfin_read16(CAN1_MB21_DATA0)
+#define bfin_write_CAN1_MB21_DATA0(val)		bfin_write16(CAN1_MB21_DATA0, val)
+#define bfin_read_CAN1_MB21_DATA1()		bfin_read16(CAN1_MB21_DATA1)
+#define bfin_write_CAN1_MB21_DATA1(val)		bfin_write16(CAN1_MB21_DATA1, val)
+#define bfin_read_CAN1_MB21_DATA2()		bfin_read16(CAN1_MB21_DATA2)
+#define bfin_write_CAN1_MB21_DATA2(val)		bfin_write16(CAN1_MB21_DATA2, val)
+#define bfin_read_CAN1_MB21_DATA3()		bfin_read16(CAN1_MB21_DATA3)
+#define bfin_write_CAN1_MB21_DATA3(val)		bfin_write16(CAN1_MB21_DATA3, val)
+#define bfin_read_CAN1_MB21_LENGTH()		bfin_read16(CAN1_MB21_LENGTH)
+#define bfin_write_CAN1_MB21_LENGTH(val)	bfin_write16(CAN1_MB21_LENGTH, val)
+#define bfin_read_CAN1_MB21_TIMESTAMP()		bfin_read16(CAN1_MB21_TIMESTAMP)
+#define bfin_write_CAN1_MB21_TIMESTAMP(val)	bfin_write16(CAN1_MB21_TIMESTAMP, val)
+#define bfin_read_CAN1_MB21_ID0()		bfin_read16(CAN1_MB21_ID0)
+#define bfin_write_CAN1_MB21_ID0(val)		bfin_write16(CAN1_MB21_ID0, val)
+#define bfin_read_CAN1_MB21_ID1()		bfin_read16(CAN1_MB21_ID1)
+#define bfin_write_CAN1_MB21_ID1(val)		bfin_write16(CAN1_MB21_ID1, val)
+#define bfin_read_CAN1_MB22_DATA0()		bfin_read16(CAN1_MB22_DATA0)
+#define bfin_write_CAN1_MB22_DATA0(val)		bfin_write16(CAN1_MB22_DATA0, val)
+#define bfin_read_CAN1_MB22_DATA1()		bfin_read16(CAN1_MB22_DATA1)
+#define bfin_write_CAN1_MB22_DATA1(val)		bfin_write16(CAN1_MB22_DATA1, val)
+#define bfin_read_CAN1_MB22_DATA2()		bfin_read16(CAN1_MB22_DATA2)
+#define bfin_write_CAN1_MB22_DATA2(val)		bfin_write16(CAN1_MB22_DATA2, val)
+#define bfin_read_CAN1_MB22_DATA3()		bfin_read16(CAN1_MB22_DATA3)
+#define bfin_write_CAN1_MB22_DATA3(val)		bfin_write16(CAN1_MB22_DATA3, val)
+#define bfin_read_CAN1_MB22_LENGTH()		bfin_read16(CAN1_MB22_LENGTH)
+#define bfin_write_CAN1_MB22_LENGTH(val)	bfin_write16(CAN1_MB22_LENGTH, val)
+#define bfin_read_CAN1_MB22_TIMESTAMP()		bfin_read16(CAN1_MB22_TIMESTAMP)
+#define bfin_write_CAN1_MB22_TIMESTAMP(val)	bfin_write16(CAN1_MB22_TIMESTAMP, val)
+#define bfin_read_CAN1_MB22_ID0()		bfin_read16(CAN1_MB22_ID0)
+#define bfin_write_CAN1_MB22_ID0(val)		bfin_write16(CAN1_MB22_ID0, val)
+#define bfin_read_CAN1_MB22_ID1()		bfin_read16(CAN1_MB22_ID1)
+#define bfin_write_CAN1_MB22_ID1(val)		bfin_write16(CAN1_MB22_ID1, val)
+#define bfin_read_CAN1_MB23_DATA0()		bfin_read16(CAN1_MB23_DATA0)
+#define bfin_write_CAN1_MB23_DATA0(val)		bfin_write16(CAN1_MB23_DATA0, val)
+#define bfin_read_CAN1_MB23_DATA1()		bfin_read16(CAN1_MB23_DATA1)
+#define bfin_write_CAN1_MB23_DATA1(val)		bfin_write16(CAN1_MB23_DATA1, val)
+#define bfin_read_CAN1_MB23_DATA2()		bfin_read16(CAN1_MB23_DATA2)
+#define bfin_write_CAN1_MB23_DATA2(val)		bfin_write16(CAN1_MB23_DATA2, val)
+#define bfin_read_CAN1_MB23_DATA3()		bfin_read16(CAN1_MB23_DATA3)
+#define bfin_write_CAN1_MB23_DATA3(val)		bfin_write16(CAN1_MB23_DATA3, val)
+#define bfin_read_CAN1_MB23_LENGTH()		bfin_read16(CAN1_MB23_LENGTH)
+#define bfin_write_CAN1_MB23_LENGTH(val)	bfin_write16(CAN1_MB23_LENGTH, val)
+#define bfin_read_CAN1_MB23_TIMESTAMP()		bfin_read16(CAN1_MB23_TIMESTAMP)
+#define bfin_write_CAN1_MB23_TIMESTAMP(val)	bfin_write16(CAN1_MB23_TIMESTAMP, val)
+#define bfin_read_CAN1_MB23_ID0()		bfin_read16(CAN1_MB23_ID0)
+#define bfin_write_CAN1_MB23_ID0(val)		bfin_write16(CAN1_MB23_ID0, val)
+#define bfin_read_CAN1_MB23_ID1()		bfin_read16(CAN1_MB23_ID1)
+#define bfin_write_CAN1_MB23_ID1(val)		bfin_write16(CAN1_MB23_ID1, val)
+#define bfin_read_CAN1_MB24_DATA0()		bfin_read16(CAN1_MB24_DATA0)
+#define bfin_write_CAN1_MB24_DATA0(val)		bfin_write16(CAN1_MB24_DATA0, val)
+#define bfin_read_CAN1_MB24_DATA1()		bfin_read16(CAN1_MB24_DATA1)
+#define bfin_write_CAN1_MB24_DATA1(val)		bfin_write16(CAN1_MB24_DATA1, val)
+#define bfin_read_CAN1_MB24_DATA2()		bfin_read16(CAN1_MB24_DATA2)
+#define bfin_write_CAN1_MB24_DATA2(val)		bfin_write16(CAN1_MB24_DATA2, val)
+#define bfin_read_CAN1_MB24_DATA3()		bfin_read16(CAN1_MB24_DATA3)
+#define bfin_write_CAN1_MB24_DATA3(val)		bfin_write16(CAN1_MB24_DATA3, val)
+#define bfin_read_CAN1_MB24_LENGTH()		bfin_read16(CAN1_MB24_LENGTH)
+#define bfin_write_CAN1_MB24_LENGTH(val)	bfin_write16(CAN1_MB24_LENGTH, val)
+#define bfin_read_CAN1_MB24_TIMESTAMP()		bfin_read16(CAN1_MB24_TIMESTAMP)
+#define bfin_write_CAN1_MB24_TIMESTAMP(val)	bfin_write16(CAN1_MB24_TIMESTAMP, val)
+#define bfin_read_CAN1_MB24_ID0()		bfin_read16(CAN1_MB24_ID0)
+#define bfin_write_CAN1_MB24_ID0(val)		bfin_write16(CAN1_MB24_ID0, val)
+#define bfin_read_CAN1_MB24_ID1()		bfin_read16(CAN1_MB24_ID1)
+#define bfin_write_CAN1_MB24_ID1(val)		bfin_write16(CAN1_MB24_ID1, val)
+#define bfin_read_CAN1_MB25_DATA0()		bfin_read16(CAN1_MB25_DATA0)
+#define bfin_write_CAN1_MB25_DATA0(val)		bfin_write16(CAN1_MB25_DATA0, val)
+#define bfin_read_CAN1_MB25_DATA1()		bfin_read16(CAN1_MB25_DATA1)
+#define bfin_write_CAN1_MB25_DATA1(val)		bfin_write16(CAN1_MB25_DATA1, val)
+#define bfin_read_CAN1_MB25_DATA2()		bfin_read16(CAN1_MB25_DATA2)
+#define bfin_write_CAN1_MB25_DATA2(val)		bfin_write16(CAN1_MB25_DATA2, val)
+#define bfin_read_CAN1_MB25_DATA3()		bfin_read16(CAN1_MB25_DATA3)
+#define bfin_write_CAN1_MB25_DATA3(val)		bfin_write16(CAN1_MB25_DATA3, val)
+#define bfin_read_CAN1_MB25_LENGTH()		bfin_read16(CAN1_MB25_LENGTH)
+#define bfin_write_CAN1_MB25_LENGTH(val)	bfin_write16(CAN1_MB25_LENGTH, val)
+#define bfin_read_CAN1_MB25_TIMESTAMP()		bfin_read16(CAN1_MB25_TIMESTAMP)
+#define bfin_write_CAN1_MB25_TIMESTAMP(val)	bfin_write16(CAN1_MB25_TIMESTAMP, val)
+#define bfin_read_CAN1_MB25_ID0()		bfin_read16(CAN1_MB25_ID0)
+#define bfin_write_CAN1_MB25_ID0(val)		bfin_write16(CAN1_MB25_ID0, val)
+#define bfin_read_CAN1_MB25_ID1()		bfin_read16(CAN1_MB25_ID1)
+#define bfin_write_CAN1_MB25_ID1(val)		bfin_write16(CAN1_MB25_ID1, val)
+#define bfin_read_CAN1_MB26_DATA0()		bfin_read16(CAN1_MB26_DATA0)
+#define bfin_write_CAN1_MB26_DATA0(val)		bfin_write16(CAN1_MB26_DATA0, val)
+#define bfin_read_CAN1_MB26_DATA1()		bfin_read16(CAN1_MB26_DATA1)
+#define bfin_write_CAN1_MB26_DATA1(val)		bfin_write16(CAN1_MB26_DATA1, val)
+#define bfin_read_CAN1_MB26_DATA2()		bfin_read16(CAN1_MB26_DATA2)
+#define bfin_write_CAN1_MB26_DATA2(val)		bfin_write16(CAN1_MB26_DATA2, val)
+#define bfin_read_CAN1_MB26_DATA3()		bfin_read16(CAN1_MB26_DATA3)
+#define bfin_write_CAN1_MB26_DATA3(val)		bfin_write16(CAN1_MB26_DATA3, val)
+#define bfin_read_CAN1_MB26_LENGTH()		bfin_read16(CAN1_MB26_LENGTH)
+#define bfin_write_CAN1_MB26_LENGTH(val)	bfin_write16(CAN1_MB26_LENGTH, val)
+#define bfin_read_CAN1_MB26_TIMESTAMP()		bfin_read16(CAN1_MB26_TIMESTAMP)
+#define bfin_write_CAN1_MB26_TIMESTAMP(val)	bfin_write16(CAN1_MB26_TIMESTAMP, val)
+#define bfin_read_CAN1_MB26_ID0()		bfin_read16(CAN1_MB26_ID0)
+#define bfin_write_CAN1_MB26_ID0(val)		bfin_write16(CAN1_MB26_ID0, val)
+#define bfin_read_CAN1_MB26_ID1()		bfin_read16(CAN1_MB26_ID1)
+#define bfin_write_CAN1_MB26_ID1(val)		bfin_write16(CAN1_MB26_ID1, val)
+#define bfin_read_CAN1_MB27_DATA0()		bfin_read16(CAN1_MB27_DATA0)
+#define bfin_write_CAN1_MB27_DATA0(val)		bfin_write16(CAN1_MB27_DATA0, val)
+#define bfin_read_CAN1_MB27_DATA1()		bfin_read16(CAN1_MB27_DATA1)
+#define bfin_write_CAN1_MB27_DATA1(val)		bfin_write16(CAN1_MB27_DATA1, val)
+#define bfin_read_CAN1_MB27_DATA2()		bfin_read16(CAN1_MB27_DATA2)
+#define bfin_write_CAN1_MB27_DATA2(val)		bfin_write16(CAN1_MB27_DATA2, val)
+#define bfin_read_CAN1_MB27_DATA3()		bfin_read16(CAN1_MB27_DATA3)
+#define bfin_write_CAN1_MB27_DATA3(val)		bfin_write16(CAN1_MB27_DATA3, val)
+#define bfin_read_CAN1_MB27_LENGTH()		bfin_read16(CAN1_MB27_LENGTH)
+#define bfin_write_CAN1_MB27_LENGTH(val)	bfin_write16(CAN1_MB27_LENGTH, val)
+#define bfin_read_CAN1_MB27_TIMESTAMP()		bfin_read16(CAN1_MB27_TIMESTAMP)
+#define bfin_write_CAN1_MB27_TIMESTAMP(val)	bfin_write16(CAN1_MB27_TIMESTAMP, val)
+#define bfin_read_CAN1_MB27_ID0()		bfin_read16(CAN1_MB27_ID0)
+#define bfin_write_CAN1_MB27_ID0(val)		bfin_write16(CAN1_MB27_ID0, val)
+#define bfin_read_CAN1_MB27_ID1()		bfin_read16(CAN1_MB27_ID1)
+#define bfin_write_CAN1_MB27_ID1(val)		bfin_write16(CAN1_MB27_ID1, val)
+#define bfin_read_CAN1_MB28_DATA0()		bfin_read16(CAN1_MB28_DATA0)
+#define bfin_write_CAN1_MB28_DATA0(val)		bfin_write16(CAN1_MB28_DATA0, val)
+#define bfin_read_CAN1_MB28_DATA1()		bfin_read16(CAN1_MB28_DATA1)
+#define bfin_write_CAN1_MB28_DATA1(val)		bfin_write16(CAN1_MB28_DATA1, val)
+#define bfin_read_CAN1_MB28_DATA2()		bfin_read16(CAN1_MB28_DATA2)
+#define bfin_write_CAN1_MB28_DATA2(val)		bfin_write16(CAN1_MB28_DATA2, val)
+#define bfin_read_CAN1_MB28_DATA3()		bfin_read16(CAN1_MB28_DATA3)
+#define bfin_write_CAN1_MB28_DATA3(val)		bfin_write16(CAN1_MB28_DATA3, val)
+#define bfin_read_CAN1_MB28_LENGTH()		bfin_read16(CAN1_MB28_LENGTH)
+#define bfin_write_CAN1_MB28_LENGTH(val)	bfin_write16(CAN1_MB28_LENGTH, val)
+#define bfin_read_CAN1_MB28_TIMESTAMP()		bfin_read16(CAN1_MB28_TIMESTAMP)
+#define bfin_write_CAN1_MB28_TIMESTAMP(val)	bfin_write16(CAN1_MB28_TIMESTAMP, val)
+#define bfin_read_CAN1_MB28_ID0()		bfin_read16(CAN1_MB28_ID0)
+#define bfin_write_CAN1_MB28_ID0(val)		bfin_write16(CAN1_MB28_ID0, val)
+#define bfin_read_CAN1_MB28_ID1()		bfin_read16(CAN1_MB28_ID1)
+#define bfin_write_CAN1_MB28_ID1(val)		bfin_write16(CAN1_MB28_ID1, val)
+#define bfin_read_CAN1_MB29_DATA0()		bfin_read16(CAN1_MB29_DATA0)
+#define bfin_write_CAN1_MB29_DATA0(val)		bfin_write16(CAN1_MB29_DATA0, val)
+#define bfin_read_CAN1_MB29_DATA1()		bfin_read16(CAN1_MB29_DATA1)
+#define bfin_write_CAN1_MB29_DATA1(val)		bfin_write16(CAN1_MB29_DATA1, val)
+#define bfin_read_CAN1_MB29_DATA2()		bfin_read16(CAN1_MB29_DATA2)
+#define bfin_write_CAN1_MB29_DATA2(val)		bfin_write16(CAN1_MB29_DATA2, val)
+#define bfin_read_CAN1_MB29_DATA3()		bfin_read16(CAN1_MB29_DATA3)
+#define bfin_write_CAN1_MB29_DATA3(val)		bfin_write16(CAN1_MB29_DATA3, val)
+#define bfin_read_CAN1_MB29_LENGTH()		bfin_read16(CAN1_MB29_LENGTH)
+#define bfin_write_CAN1_MB29_LENGTH(val)	bfin_write16(CAN1_MB29_LENGTH, val)
+#define bfin_read_CAN1_MB29_TIMESTAMP()		bfin_read16(CAN1_MB29_TIMESTAMP)
+#define bfin_write_CAN1_MB29_TIMESTAMP(val)	bfin_write16(CAN1_MB29_TIMESTAMP, val)
+#define bfin_read_CAN1_MB29_ID0()		bfin_read16(CAN1_MB29_ID0)
+#define bfin_write_CAN1_MB29_ID0(val)		bfin_write16(CAN1_MB29_ID0, val)
+#define bfin_read_CAN1_MB29_ID1()		bfin_read16(CAN1_MB29_ID1)
+#define bfin_write_CAN1_MB29_ID1(val)		bfin_write16(CAN1_MB29_ID1, val)
+#define bfin_read_CAN1_MB30_DATA0()		bfin_read16(CAN1_MB30_DATA0)
+#define bfin_write_CAN1_MB30_DATA0(val)		bfin_write16(CAN1_MB30_DATA0, val)
+#define bfin_read_CAN1_MB30_DATA1()		bfin_read16(CAN1_MB30_DATA1)
+#define bfin_write_CAN1_MB30_DATA1(val)		bfin_write16(CAN1_MB30_DATA1, val)
+#define bfin_read_CAN1_MB30_DATA2()		bfin_read16(CAN1_MB30_DATA2)
+#define bfin_write_CAN1_MB30_DATA2(val)		bfin_write16(CAN1_MB30_DATA2, val)
+#define bfin_read_CAN1_MB30_DATA3()		bfin_read16(CAN1_MB30_DATA3)
+#define bfin_write_CAN1_MB30_DATA3(val)		bfin_write16(CAN1_MB30_DATA3, val)
+#define bfin_read_CAN1_MB30_LENGTH()		bfin_read16(CAN1_MB30_LENGTH)
+#define bfin_write_CAN1_MB30_LENGTH(val)	bfin_write16(CAN1_MB30_LENGTH, val)
+#define bfin_read_CAN1_MB30_TIMESTAMP()		bfin_read16(CAN1_MB30_TIMESTAMP)
+#define bfin_write_CAN1_MB30_TIMESTAMP(val)	bfin_write16(CAN1_MB30_TIMESTAMP, val)
+#define bfin_read_CAN1_MB30_ID0()		bfin_read16(CAN1_MB30_ID0)
+#define bfin_write_CAN1_MB30_ID0(val)		bfin_write16(CAN1_MB30_ID0, val)
+#define bfin_read_CAN1_MB30_ID1()		bfin_read16(CAN1_MB30_ID1)
+#define bfin_write_CAN1_MB30_ID1(val)		bfin_write16(CAN1_MB30_ID1, val)
+#define bfin_read_CAN1_MB31_DATA0()		bfin_read16(CAN1_MB31_DATA0)
+#define bfin_write_CAN1_MB31_DATA0(val)		bfin_write16(CAN1_MB31_DATA0, val)
+#define bfin_read_CAN1_MB31_DATA1()		bfin_read16(CAN1_MB31_DATA1)
+#define bfin_write_CAN1_MB31_DATA1(val)		bfin_write16(CAN1_MB31_DATA1, val)
+#define bfin_read_CAN1_MB31_DATA2()		bfin_read16(CAN1_MB31_DATA2)
+#define bfin_write_CAN1_MB31_DATA2(val)		bfin_write16(CAN1_MB31_DATA2, val)
+#define bfin_read_CAN1_MB31_DATA3()		bfin_read16(CAN1_MB31_DATA3)
+#define bfin_write_CAN1_MB31_DATA3(val)		bfin_write16(CAN1_MB31_DATA3, val)
+#define bfin_read_CAN1_MB31_LENGTH()		bfin_read16(CAN1_MB31_LENGTH)
+#define bfin_write_CAN1_MB31_LENGTH(val)	bfin_write16(CAN1_MB31_LENGTH, val)
+#define bfin_read_CAN1_MB31_TIMESTAMP()		bfin_read16(CAN1_MB31_TIMESTAMP)
+#define bfin_write_CAN1_MB31_TIMESTAMP(val)	bfin_write16(CAN1_MB31_TIMESTAMP, val)
+#define bfin_read_CAN1_MB31_ID0()		bfin_read16(CAN1_MB31_ID0)
+#define bfin_write_CAN1_MB31_ID0(val)		bfin_write16(CAN1_MB31_ID0, val)
+#define bfin_read_CAN1_MB31_ID1()		bfin_read16(CAN1_MB31_ID1)
+#define bfin_write_CAN1_MB31_ID1(val)		bfin_write16(CAN1_MB31_ID1, val)
+
+/* ATAPI Registers */
+
+#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
+#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
+#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
+#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
+#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
+#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
+#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
+#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
+#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
+#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
+#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
+#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
+#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
+#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
+#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
+#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
+#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
+#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
+#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
+#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
+#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
+#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
+#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
+#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
+#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
+#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
+#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
+#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
+#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
+#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
+#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
+#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
+#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
+#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
+#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
+#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
+#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
+#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
+#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
+#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
+#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
+#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
+#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
+#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
+
+/* SDH Registers */
+
+#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
+#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
+#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
+#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
+#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
+#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
+#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
+#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
+#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
+#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
+#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
+#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
+#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
+#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
+#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
+#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
+#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
+#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
+#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
+#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
+#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
+#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
+#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
+#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
+#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
+#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
+#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
+#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
+#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
+#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
+#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
+#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
+#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
+#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
+#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
+#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
+#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
+#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
+#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
+#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
+#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
+#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
+#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
+#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
+#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
+#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
+#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
+#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
+#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
+#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
+#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
+#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
+#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
+#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
+#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
+#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
+#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
+#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
+#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
+#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
+#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
+#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()	bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)	bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)	bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()	bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)	bfin_write16(HOST_TIMEOUT, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()		bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)	bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()		bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)	bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()		bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)	bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()		bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)	bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()		bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)	bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()		bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)	bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()	bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)	bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()	bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)	bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()		bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)	bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()	bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)	bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()		bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)	bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endbfin_read_()oint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()	bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)	bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()	bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)	bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()	bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)	bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()	bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)	bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()	bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)	bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()	bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)	bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()	bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)	bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()	bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)	bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()	bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)	bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()		bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)	bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()		bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)	bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()		bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)	bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()		bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)	bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
+#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endbfin_read_()oint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+/* Keybfin_read_()ad Registers */
+
+#define bfin_read_KPAD_CTL()		bfin_read16(KPAD_CTL)
+#define bfin_write_KPAD_CTL(val)	bfin_write16(KPAD_CTL, val)
+#define bfin_read_KPAD_PRESCALE()	bfin_read16(KPAD_PRESCALE)
+#define bfin_write_KPAD_PRESCALE(val)	bfin_write16(KPAD_PRESCALE, val)
+#define bfin_read_KPAD_MSEL()		bfin_read16(KPAD_MSEL)
+#define bfin_write_KPAD_MSEL(val)	bfin_write16(KPAD_MSEL, val)
+#define bfin_read_KPAD_ROWCOL()		bfin_read16(KPAD_ROWCOL)
+#define bfin_write_KPAD_ROWCOL(val)	bfin_write16(KPAD_ROWCOL, val)
+#define bfin_read_KPAD_STAT()		bfin_read16(KPAD_STAT)
+#define bfin_write_KPAD_STAT(val)	bfin_write16(KPAD_STAT, val)
+#define bfin_read_KPAD_SOFTEVAL()	bfin_read16(KPAD_SOFTEVAL)
+#define bfin_write_KPAD_SOFTEVAL(val)	bfin_write16(KPAD_SOFTEVAL, val)
+
+/* Pixel Combfin_read_()ositor (PIXC) Registers */
+
+#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
+#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
+#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
+#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
+#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
+#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
+#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
+#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
+#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
+#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
+#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
+#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
+#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
+#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
+#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
+#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
+#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
+#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
+#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
+#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
+#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
+#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
+#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
+#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
+#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
+#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
+#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
+#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
+#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
+#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
+#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
+#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
+#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
+#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
+#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
+#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
+#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
+#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
+
+/* Handshake MDMA 0 Registers */
+
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+/* Handshake MDMA 1 Registers */
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+#endif /* _CDEF_BF548_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
new file mode 100644
index 00000000000..ead360b69de
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -0,0 +1,1863 @@
+/*
+ * File:         include/asm-blackfin/mach-bf549/cdefBF549.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF549_H
+#define _CDEF_BF549_H
+
+/* include all Core registers and bit definitions */
+#include "defBF549.h"
+
+/* include core sbfin_read_()ecific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
+
+/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
+#include "cdefBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF549 that are not in the common header */
+
+/* Timer Registers */
+
+#define bfin_read_TIMER8_CONFIG()		bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)		bfin_write16(TIMER8_CONFIG, val)
+#define bfin_read_TIMER8_COUNTER()		bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)		bfin_write32(TIMER8_COUNTER, val)
+#define bfin_read_TIMER8_PERIOD()		bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)		bfin_write32(TIMER8_PERIOD, val)
+#define bfin_read_TIMER8_WIDTH()		bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)		bfin_write32(TIMER8_WIDTH, val)
+#define bfin_read_TIMER9_CONFIG()		bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)		bfin_write16(TIMER9_CONFIG, val)
+#define bfin_read_TIMER9_COUNTER()		bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)		bfin_write32(TIMER9_COUNTER, val)
+#define bfin_read_TIMER9_PERIOD()		bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)		bfin_write32(TIMER9_PERIOD, val)
+#define bfin_read_TIMER9_WIDTH()		bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)		bfin_write32(TIMER9_WIDTH, val)
+#define bfin_read_TIMER10_CONFIG()		bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)		bfin_write16(TIMER10_CONFIG, val)
+#define bfin_read_TIMER10_COUNTER()		bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)		bfin_write32(TIMER10_COUNTER, val)
+#define bfin_read_TIMER10_PERIOD()		bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)		bfin_write32(TIMER10_PERIOD, val)
+#define bfin_read_TIMER10_WIDTH()		bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)		bfin_write32(TIMER10_WIDTH, val)
+
+/* Timer Groubfin_read_() of 3 */
+
+#define bfin_read_TIMER_ENABLE1()		bfin_read16(TIMER_ENABLE1)
+#define bfin_write_TIMER_ENABLE1(val)		bfin_write16(TIMER_ENABLE1, val)
+#define bfin_read_TIMER_DISABLE1()		bfin_read16(TIMER_DISABLE1)
+#define bfin_write_TIMER_DISABLE1(val)		bfin_write16(TIMER_DISABLE1, val)
+#define bfin_read_TIMER_STATUS1()		bfin_read32(TIMER_STATUS1)
+#define bfin_write_TIMER_STATUS1(val)		bfin_write32(TIMER_STATUS1, val)
+
+/* SPORT0 Registers */
+
+#define bfin_read_SPORT0_TCR1()			bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)		bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2()			bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)		bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV()		bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)		bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV()		bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)		bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX()			bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)		bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX()			bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)		bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_RCR1()			bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)		bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2()			bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)		bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV()		bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)		bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV()		bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)		bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT()			bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)		bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL()			bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)		bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1()		bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)		bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2()		bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)		bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0()		bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)		bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1()		bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)		bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2()		bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)		bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3()		bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)		bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0()		bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)		bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1()		bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)		bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2()		bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)		bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3()		bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)		bfin_write32(SPORT0_MRCS3, val)
+
+/* EPPI0 Registers */
+
+#define bfin_read_EPPI0_STATUS()		bfin_read16(EPPI0_STATUS)
+#define bfin_write_EPPI0_STATUS(val)		bfin_write16(EPPI0_STATUS, val)
+#define bfin_read_EPPI0_HCOUNT()		bfin_read16(EPPI0_HCOUNT)
+#define bfin_write_EPPI0_HCOUNT(val)		bfin_write16(EPPI0_HCOUNT, val)
+#define bfin_read_EPPI0_HDELAY()		bfin_read16(EPPI0_HDELAY)
+#define bfin_write_EPPI0_HDELAY(val)		bfin_write16(EPPI0_HDELAY, val)
+#define bfin_read_EPPI0_VCOUNT()		bfin_read16(EPPI0_VCOUNT)
+#define bfin_write_EPPI0_VCOUNT(val)		bfin_write16(EPPI0_VCOUNT, val)
+#define bfin_read_EPPI0_VDELAY()		bfin_read16(EPPI0_VDELAY)
+#define bfin_write_EPPI0_VDELAY(val)		bfin_write16(EPPI0_VDELAY, val)
+#define bfin_read_EPPI0_FRAME()			bfin_read16(EPPI0_FRAME)
+#define bfin_write_EPPI0_FRAME(val)		bfin_write16(EPPI0_FRAME, val)
+#define bfin_read_EPPI0_LINE()			bfin_read16(EPPI0_LINE)
+#define bfin_write_EPPI0_LINE(val)		bfin_write16(EPPI0_LINE, val)
+#define bfin_read_EPPI0_CLKDIV()		bfin_read16(EPPI0_CLKDIV)
+#define bfin_write_EPPI0_CLKDIV(val)		bfin_write16(EPPI0_CLKDIV, val)
+#define bfin_read_EPPI0_CONTROL()		bfin_read32(EPPI0_CONTROL)
+#define bfin_write_EPPI0_CONTROL(val)		bfin_write32(EPPI0_CONTROL, val)
+#define bfin_read_EPPI0_FS1W_HBL()		bfin_read32(EPPI0_FS1W_HBL)
+#define bfin_write_EPPI0_FS1W_HBL(val)		bfin_write32(EPPI0_FS1W_HBL, val)
+#define bfin_read_EPPI0_FS1P_AVPL()		bfin_read32(EPPI0_FS1P_AVPL)
+#define bfin_write_EPPI0_FS1P_AVPL(val)		bfin_write32(EPPI0_FS1P_AVPL, val)
+#define bfin_read_EPPI0_FS2W_LVB()		bfin_read32(EPPI0_FS2W_LVB)
+#define bfin_write_EPPI0_FS2W_LVB(val)		bfin_write32(EPPI0_FS2W_LVB, val)
+#define bfin_read_EPPI0_FS2P_LAVF()		bfin_read32(EPPI0_FS2P_LAVF)
+#define bfin_write_EPPI0_FS2P_LAVF(val)		bfin_write32(EPPI0_FS2P_LAVF, val)
+#define bfin_read_EPPI0_CLIP()			bfin_read32(EPPI0_CLIP)
+#define bfin_write_EPPI0_CLIP(val)		bfin_write32(EPPI0_CLIP, val)
+
+/* UART2 Registers */
+
+#define bfin_read_UART2_DLL()			bfin_read16(UART2_DLL)
+#define bfin_write_UART2_DLL(val)		bfin_write16(UART2_DLL, val)
+#define bfin_read_UART2_DLH()			bfin_read16(UART2_DLH)
+#define bfin_write_UART2_DLH(val)		bfin_write16(UART2_DLH, val)
+#define bfin_read_UART2_GCTL()			bfin_read16(UART2_GCTL)
+#define bfin_write_UART2_GCTL(val)		bfin_write16(UART2_GCTL, val)
+#define bfin_read_UART2_LCR()			bfin_read16(UART2_LCR)
+#define bfin_write_UART2_LCR(val)		bfin_write16(UART2_LCR, val)
+#define bfin_read_UART2_MCR()			bfin_read16(UART2_MCR)
+#define bfin_write_UART2_MCR(val)		bfin_write16(UART2_MCR, val)
+#define bfin_read_UART2_LSR()			bfin_read16(UART2_LSR)
+#define bfin_write_UART2_LSR(val)		bfin_write16(UART2_LSR, val)
+#define bfin_read_UART2_MSR()			bfin_read16(UART2_MSR)
+#define bfin_write_UART2_MSR(val)		bfin_write16(UART2_MSR, val)
+#define bfin_read_UART2_SCR()			bfin_read16(UART2_SCR)
+#define bfin_write_UART2_SCR(val)		bfin_write16(UART2_SCR, val)
+#define bfin_read_UART2_IER_SET()		bfin_read16(UART2_IER_SET)
+#define bfin_write_UART2_IER_SET(val)		bfin_write16(UART2_IER_SET, val)
+#define bfin_read_UART2_IER_CLEAR()		bfin_read16(UART2_IER_CLEAR)
+#define bfin_write_UART2_IER_CLEAR(val)		bfin_write16(UART2_IER_CLEAR, val)
+#define bfin_read_UART2_RBR()			bfin_read16(UART2_RBR)
+#define bfin_write_UART2_RBR(val)		bfin_write16(UART2_RBR, val)
+
+/* Two Wire Interface Registers (TWI1) */
+
+/* SPI2 Registers */
+
+#define bfin_read_SPI2_CTL()		bfin_read16(SPI2_CTL)
+#define bfin_write_SPI2_CTL(val)	bfin_write16(SPI2_CTL, val)
+#define bfin_read_SPI2_FLG()		bfin_read16(SPI2_FLG)
+#define bfin_write_SPI2_FLG(val)	bfin_write16(SPI2_FLG, val)
+#define bfin_read_SPI2_STAT()		bfin_read16(SPI2_STAT)
+#define bfin_write_SPI2_STAT(val)	bfin_write16(SPI2_STAT, val)
+#define bfin_read_SPI2_TDBR()		bfin_read16(SPI2_TDBR)
+#define bfin_write_SPI2_TDBR(val)	bfin_write16(SPI2_TDBR, val)
+#define bfin_read_SPI2_RDBR()		bfin_read16(SPI2_RDBR)
+#define bfin_write_SPI2_RDBR(val)	bfin_write16(SPI2_RDBR, val)
+#define bfin_read_SPI2_BAUD()		bfin_read16(SPI2_BAUD)
+#define bfin_write_SPI2_BAUD(val)	bfin_write16(SPI2_BAUD, val)
+#define bfin_read_SPI2_SHADOW()		bfin_read16(SPI2_SHADOW)
+#define bfin_write_SPI2_SHADOW(val)	bfin_write16(SPI2_SHADOW, val)
+
+/* MXVR Registers */
+
+#define bfin_read_MXVR_CONFIG()			bfin_read16(MXVR_CONFIG)
+#define bfin_write_MXVR_CONFIG(val)		bfin_write16(MXVR_CONFIG, val)
+#define bfin_read_MXVR_STATE_0()		bfin_read32(MXVR_STATE_0)
+#define bfin_write_MXVR_STATE_0(val)		bfin_write32(MXVR_STATE_0, val)
+#define bfin_read_MXVR_STATE_1()		bfin_read32(MXVR_STATE_1)
+#define bfin_write_MXVR_STATE_1(val)		bfin_write32(MXVR_STATE_1, val)
+#define bfin_read_MXVR_INT_STAT_0()		bfin_read32(MXVR_INT_STAT_0)
+#define bfin_write_MXVR_INT_STAT_0(val)		bfin_write32(MXVR_INT_STAT_0, val)
+#define bfin_read_MXVR_INT_STAT_1()		bfin_read32(MXVR_INT_STAT_1)
+#define bfin_write_MXVR_INT_STAT_1(val)		bfin_write32(MXVR_INT_STAT_1, val)
+#define bfin_read_MXVR_INT_EN_0()		bfin_read32(MXVR_INT_EN_0)
+#define bfin_write_MXVR_INT_EN_0(val)		bfin_write32(MXVR_INT_EN_0, val)
+#define bfin_read_MXVR_INT_EN_1()		bfin_read32(MXVR_INT_EN_1)
+#define bfin_write_MXVR_INT_EN_1(val)		bfin_write32(MXVR_INT_EN_1, val)
+#define bfin_read_MXVR_POSITION()		bfin_read16(MXVR_POSITION)
+#define bfin_write_MXVR_POSITION(val)		bfin_write16(MXVR_POSITION, val)
+#define bfin_read_MXVR_MAX_POSITION()		bfin_read16(MXVR_MAX_POSITION)
+#define bfin_write_MXVR_MAX_POSITION(val)	bfin_write16(MXVR_MAX_POSITION, val)
+#define bfin_read_MXVR_DELAY()			bfin_read16(MXVR_DELAY)
+#define bfin_write_MXVR_DELAY(val)		bfin_write16(MXVR_DELAY, val)
+#define bfin_read_MXVR_MAX_DELAY()		bfin_read16(MXVR_MAX_DELAY)
+#define bfin_write_MXVR_MAX_DELAY(val)		bfin_write16(MXVR_MAX_DELAY, val)
+#define bfin_read_MXVR_LADDR()			bfin_read32(MXVR_LADDR)
+#define bfin_write_MXVR_LADDR(val)		bfin_write32(MXVR_LADDR, val)
+#define bfin_read_MXVR_GADDR()			bfin_read16(MXVR_GADDR)
+#define bfin_write_MXVR_GADDR(val)		bfin_write16(MXVR_GADDR, val)
+#define bfin_read_MXVR_AADDR()			bfin_read32(MXVR_AADDR)
+#define bfin_write_MXVR_AADDR(val)		bfin_write32(MXVR_AADDR, val)
+
+/* MXVR Allocation Table Registers */
+
+#define bfin_read_MXVR_ALLOC_0()		bfin_read32(MXVR_ALLOC_0)
+#define bfin_write_MXVR_ALLOC_0(val)		bfin_write32(MXVR_ALLOC_0, val)
+#define bfin_read_MXVR_ALLOC_1()		bfin_read32(MXVR_ALLOC_1)
+#define bfin_write_MXVR_ALLOC_1(val)		bfin_write32(MXVR_ALLOC_1, val)
+#define bfin_read_MXVR_ALLOC_2()		bfin_read32(MXVR_ALLOC_2)
+#define bfin_write_MXVR_ALLOC_2(val)		bfin_write32(MXVR_ALLOC_2, val)
+#define bfin_read_MXVR_ALLOC_3()		bfin_read32(MXVR_ALLOC_3)
+#define bfin_write_MXVR_ALLOC_3(val)		bfin_write32(MXVR_ALLOC_3, val)
+#define bfin_read_MXVR_ALLOC_4()		bfin_read32(MXVR_ALLOC_4)
+#define bfin_write_MXVR_ALLOC_4(val)		bfin_write32(MXVR_ALLOC_4, val)
+#define bfin_read_MXVR_ALLOC_5()		bfin_read32(MXVR_ALLOC_5)
+#define bfin_write_MXVR_ALLOC_5(val)		bfin_write32(MXVR_ALLOC_5, val)
+#define bfin_read_MXVR_ALLOC_6()		bfin_read32(MXVR_ALLOC_6)
+#define bfin_write_MXVR_ALLOC_6(val)		bfin_write32(MXVR_ALLOC_6, val)
+#define bfin_read_MXVR_ALLOC_7()		bfin_read32(MXVR_ALLOC_7)
+#define bfin_write_MXVR_ALLOC_7(val)		bfin_write32(MXVR_ALLOC_7, val)
+#define bfin_read_MXVR_ALLOC_8()		bfin_read32(MXVR_ALLOC_8)
+#define bfin_write_MXVR_ALLOC_8(val)		bfin_write32(MXVR_ALLOC_8, val)
+#define bfin_read_MXVR_ALLOC_9()		bfin_read32(MXVR_ALLOC_9)
+#define bfin_write_MXVR_ALLOC_9(val)		bfin_write32(MXVR_ALLOC_9, val)
+#define bfin_read_MXVR_ALLOC_10()		bfin_read32(MXVR_ALLOC_10)
+#define bfin_write_MXVR_ALLOC_10(val)		bfin_write32(MXVR_ALLOC_10, val)
+#define bfin_read_MXVR_ALLOC_11()		bfin_read32(MXVR_ALLOC_11)
+#define bfin_write_MXVR_ALLOC_11(val)		bfin_write32(MXVR_ALLOC_11, val)
+#define bfin_read_MXVR_ALLOC_12()		bfin_read32(MXVR_ALLOC_12)
+#define bfin_write_MXVR_ALLOC_12(val)		bfin_write32(MXVR_ALLOC_12, val)
+#define bfin_read_MXVR_ALLOC_13()		bfin_read32(MXVR_ALLOC_13)
+#define bfin_write_MXVR_ALLOC_13(val)		bfin_write32(MXVR_ALLOC_13, val)
+#define bfin_read_MXVR_ALLOC_14()		bfin_read32(MXVR_ALLOC_14)
+#define bfin_write_MXVR_ALLOC_14(val)		bfin_write32(MXVR_ALLOC_14, val)
+
+/* MXVR Channel Assign Registers */
+
+#define bfin_read_MXVR_SYNC_LCHAN_0()		bfin_read32(MXVR_SYNC_LCHAN_0)
+#define bfin_write_MXVR_SYNC_LCHAN_0(val)	bfin_write32(MXVR_SYNC_LCHAN_0, val)
+#define bfin_read_MXVR_SYNC_LCHAN_1()		bfin_read32(MXVR_SYNC_LCHAN_1)
+#define bfin_write_MXVR_SYNC_LCHAN_1(val)	bfin_write32(MXVR_SYNC_LCHAN_1, val)
+#define bfin_read_MXVR_SYNC_LCHAN_2()		bfin_read32(MXVR_SYNC_LCHAN_2)
+#define bfin_write_MXVR_SYNC_LCHAN_2(val)	bfin_write32(MXVR_SYNC_LCHAN_2, val)
+#define bfin_read_MXVR_SYNC_LCHAN_3()		bfin_read32(MXVR_SYNC_LCHAN_3)
+#define bfin_write_MXVR_SYNC_LCHAN_3(val)	bfin_write32(MXVR_SYNC_LCHAN_3, val)
+#define bfin_read_MXVR_SYNC_LCHAN_4()		bfin_read32(MXVR_SYNC_LCHAN_4)
+#define bfin_write_MXVR_SYNC_LCHAN_4(val)	bfin_write32(MXVR_SYNC_LCHAN_4, val)
+#define bfin_read_MXVR_SYNC_LCHAN_5()		bfin_read32(MXVR_SYNC_LCHAN_5)
+#define bfin_write_MXVR_SYNC_LCHAN_5(val)	bfin_write32(MXVR_SYNC_LCHAN_5, val)
+#define bfin_read_MXVR_SYNC_LCHAN_6()		bfin_read32(MXVR_SYNC_LCHAN_6)
+#define bfin_write_MXVR_SYNC_LCHAN_6(val)	bfin_write32(MXVR_SYNC_LCHAN_6, val)
+#define bfin_read_MXVR_SYNC_LCHAN_7()		bfin_read32(MXVR_SYNC_LCHAN_7)
+#define bfin_write_MXVR_SYNC_LCHAN_7(val)	bfin_write32(MXVR_SYNC_LCHAN_7, val)
+
+/* MXVR DMA0 Registers */
+
+#define bfin_read_MXVR_DMA0_CONFIG()		bfin_read32(MXVR_DMA0_CONFIG)
+#define bfin_write_MXVR_DMA0_CONFIG(val)	bfin_write32(MXVR_DMA0_CONFIG, val)
+#define bfin_read_MXVR_DMA0_START_ADDR()	bfin_read32(MXVR_DMA0_START_ADDR)
+#define bfin_write_MXVR_DMA0_START_ADDR(val)	bfin_write32(MXVR_DMA0_START_ADDR)
+#define bfin_read_MXVR_DMA0_COUNT()		bfin_read16(MXVR_DMA0_COUNT)
+#define bfin_write_MXVR_DMA0_COUNT(val)		bfin_write16(MXVR_DMA0_COUNT, val)
+#define bfin_read_MXVR_DMA0_CURR_ADDR()		bfin_read32(MXVR_DMA0_CURR_ADDR)
+#define bfin_write_MXVR_DMA0_CURR_ADDR(val)	bfin_write32(MXVR_DMA0_CURR_ADDR)
+#define bfin_read_MXVR_DMA0_CURR_COUNT()	bfin_read16(MXVR_DMA0_CURR_COUNT)
+#define bfin_write_MXVR_DMA0_CURR_COUNT(val)	bfin_write16(MXVR_DMA0_CURR_COUNT, val)
+
+/* MXVR DMA1 Registers */
+
+#define bfin_read_MXVR_DMA1_CONFIG()		bfin_read32(MXVR_DMA1_CONFIG)
+#define bfin_write_MXVR_DMA1_CONFIG(val)	bfin_write32(MXVR_DMA1_CONFIG, val)
+#define bfin_read_MXVR_DMA1_START_ADDR()	bfin_read32(MXVR_DMA1_START_ADDR)
+#define bfin_write_MXVR_DMA1_START_ADDR(val)	bfin_write32(MXVR_DMA1_START_ADDR)
+#define bfin_read_MXVR_DMA1_COUNT()		bfin_read16(MXVR_DMA1_COUNT)
+#define bfin_write_MXVR_DMA1_COUNT(val)		bfin_write16(MXVR_DMA1_COUNT, val)
+#define bfin_read_MXVR_DMA1_CURR_ADDR()		bfin_read32(MXVR_DMA1_CURR_ADDR)
+#define bfin_write_MXVR_DMA1_CURR_ADDR(val)	bfin_write32(MXVR_DMA1_CURR_ADDR)
+#define bfin_read_MXVR_DMA1_CURR_COUNT()	bfin_read16(MXVR_DMA1_CURR_COUNT)
+#define bfin_write_MXVR_DMA1_CURR_COUNT(val)	bfin_write16(MXVR_DMA1_CURR_COUNT, val)
+
+/* MXVR DMA2 Registers */
+
+#define bfin_read_MXVR_DMA2_CONFIG()		bfin_read32(MXVR_DMA2_CONFIG)
+#define bfin_write_MXVR_DMA2_CONFIG(val)	bfin_write32(MXVR_DMA2_CONFIG, val)
+#define bfin_read_MXVR_DMA2_START_ADDR() 	bfin_read32(MXVR_DMA2_START_ADDR)
+#define bfin_write_MXVR_DMA2_START_ADDR(val) 	bfin_write32(MXVR_DMA2_START_ADDR)
+#define bfin_read_MXVR_DMA2_COUNT()		bfin_read16(MXVR_DMA2_COUNT)
+#define bfin_write_MXVR_DMA2_COUNT(val)		bfin_write16(MXVR_DMA2_COUNT, val)
+#define bfin_read_MXVR_DMA2_CURR_ADDR() 	bfin_read32(MXVR_DMA2_CURR_ADDR)
+#define bfin_write_MXVR_DMA2_CURR_ADDR(val) 	bfin_write32(MXVR_DMA2_CURR_ADDR)
+#define bfin_read_MXVR_DMA2_CURR_COUNT()	bfin_read16(MXVR_DMA2_CURR_COUNT)
+#define bfin_write_MXVR_DMA2_CURR_COUNT(val)	bfin_write16(MXVR_DMA2_CURR_COUNT, val)
+
+/* MXVR DMA3 Registers */
+
+#define bfin_read_MXVR_DMA3_CONFIG()		bfin_read32(MXVR_DMA3_CONFIG)
+#define bfin_write_MXVR_DMA3_CONFIG(val)	bfin_write32(MXVR_DMA3_CONFIG, val)
+#define bfin_read_MXVR_DMA3_START_ADDR() 	bfin_read32(MXVR_DMA3_START_ADDR)
+#define bfin_write_MXVR_DMA3_START_ADDR(val) 	bfin_write32(MXVR_DMA3_START_ADDR)
+#define bfin_read_MXVR_DMA3_COUNT()		bfin_read16(MXVR_DMA3_COUNT)
+#define bfin_write_MXVR_DMA3_COUNT(val)		bfin_write16(MXVR_DMA3_COUNT, val)
+#define bfin_read_MXVR_DMA3_CURR_ADDR() 	bfin_read32(MXVR_DMA3_CURR_ADDR)
+#define bfin_write_MXVR_DMA3_CURR_ADDR(val) 	bfin_write32(MXVR_DMA3_CURR_ADDR)
+#define bfin_read_MXVR_DMA3_CURR_COUNT()	bfin_read16(MXVR_DMA3_CURR_COUNT)
+#define bfin_write_MXVR_DMA3_CURR_COUNT(val)	bfin_write16(MXVR_DMA3_CURR_COUNT, val)
+
+/* MXVR DMA4 Registers */
+
+#define bfin_read_MXVR_DMA4_CONFIG()		bfin_read32(MXVR_DMA4_CONFIG)
+#define bfin_write_MXVR_DMA4_CONFIG(val)	bfin_write32(MXVR_DMA4_CONFIG, val)
+#define bfin_read_MXVR_DMA4_START_ADDR() 	bfin_read32(MXVR_DMA4_START_ADDR)
+#define bfin_write_MXVR_DMA4_START_ADDR(val) 	bfin_write32(MXVR_DMA4_START_ADDR)
+#define bfin_read_MXVR_DMA4_COUNT()		bfin_read16(MXVR_DMA4_COUNT)
+#define bfin_write_MXVR_DMA4_COUNT(val)		bfin_write16(MXVR_DMA4_COUNT, val)
+#define bfin_read_MXVR_DMA4_CURR_ADDR() 	bfin_read32(MXVR_DMA4_CURR_ADDR)
+#define bfin_write_MXVR_DMA4_CURR_ADDR(val) 	bfin_write32(MXVR_DMA4_CURR_ADDR)
+#define bfin_read_MXVR_DMA4_CURR_COUNT()	bfin_read16(MXVR_DMA4_CURR_COUNT)
+#define bfin_write_MXVR_DMA4_CURR_COUNT(val)	bfin_write16(MXVR_DMA4_CURR_COUNT, val)
+
+/* MXVR DMA5 Registers */
+
+#define bfin_read_MXVR_DMA5_CONFIG()		bfin_read32(MXVR_DMA5_CONFIG)
+#define bfin_write_MXVR_DMA5_CONFIG(val)	bfin_write32(MXVR_DMA5_CONFIG, val)
+#define bfin_read_MXVR_DMA5_START_ADDR() 	bfin_read32(MXVR_DMA5_START_ADDR)
+#define bfin_write_MXVR_DMA5_START_ADDR(val) 	bfin_write32(MXVR_DMA5_START_ADDR)
+#define bfin_read_MXVR_DMA5_COUNT()		bfin_read16(MXVR_DMA5_COUNT)
+#define bfin_write_MXVR_DMA5_COUNT(val)		bfin_write16(MXVR_DMA5_COUNT, val)
+#define bfin_read_MXVR_DMA5_CURR_ADDR() 	bfin_read32(MXVR_DMA5_CURR_ADDR)
+#define bfin_write_MXVR_DMA5_CURR_ADDR(val) 	bfin_write32(MXVR_DMA5_CURR_ADDR)
+#define bfin_read_MXVR_DMA5_CURR_COUNT()	bfin_read16(MXVR_DMA5_CURR_COUNT)
+#define bfin_write_MXVR_DMA5_CURR_COUNT(val)	bfin_write16(MXVR_DMA5_CURR_COUNT, val)
+
+/* MXVR DMA6 Registers */
+
+#define bfin_read_MXVR_DMA6_CONFIG()		bfin_read32(MXVR_DMA6_CONFIG)
+#define bfin_write_MXVR_DMA6_CONFIG(val)	bfin_write32(MXVR_DMA6_CONFIG, val)
+#define bfin_read_MXVR_DMA6_START_ADDR() 	bfin_read32(MXVR_DMA6_START_ADDR)
+#define bfin_write_MXVR_DMA6_START_ADDR(val) 	bfin_write32(MXVR_DMA6_START_ADDR)
+#define bfin_read_MXVR_DMA6_COUNT()		bfin_read16(MXVR_DMA6_COUNT)
+#define bfin_write_MXVR_DMA6_COUNT(val)		bfin_write16(MXVR_DMA6_COUNT, val)
+#define bfin_read_MXVR_DMA6_CURR_ADDR() 	bfin_read32(MXVR_DMA6_CURR_ADDR)
+#define bfin_write_MXVR_DMA6_CURR_ADDR(val) 	bfin_write32(MXVR_DMA6_CURR_ADDR)
+#define bfin_read_MXVR_DMA6_CURR_COUNT()	bfin_read16(MXVR_DMA6_CURR_COUNT)
+#define bfin_write_MXVR_DMA6_CURR_COUNT(val)	bfin_write16(MXVR_DMA6_CURR_COUNT, val)
+
+/* MXVR DMA7 Registers */
+
+#define bfin_read_MXVR_DMA7_CONFIG()		bfin_read32(MXVR_DMA7_CONFIG)
+#define bfin_write_MXVR_DMA7_CONFIG(val)	bfin_write32(MXVR_DMA7_CONFIG, val)
+#define bfin_read_MXVR_DMA7_START_ADDR() 	bfin_read32(MXVR_DMA7_START_ADDR)
+#define bfin_write_MXVR_DMA7_START_ADDR(val) 	bfin_write32(MXVR_DMA7_START_ADDR)
+#define bfin_read_MXVR_DMA7_COUNT()		bfin_read16(MXVR_DMA7_COUNT)
+#define bfin_write_MXVR_DMA7_COUNT(val)		bfin_write16(MXVR_DMA7_COUNT, val)
+#define bfin_read_MXVR_DMA7_CURR_ADDR() 	bfin_read32(MXVR_DMA7_CURR_ADDR)
+#define bfin_write_MXVR_DMA7_CURR_ADDR(val) 	bfin_write32(MXVR_DMA7_CURR_ADDR)
+#define bfin_read_MXVR_DMA7_CURR_COUNT()	bfin_read16(MXVR_DMA7_CURR_COUNT)
+#define bfin_write_MXVR_DMA7_CURR_COUNT(val)	bfin_write16(MXVR_DMA7_CURR_COUNT, val)
+
+/* MXVR Asynch Packet Registers */
+
+#define bfin_read_MXVR_AP_CTL()			bfin_read16(MXVR_AP_CTL)
+#define bfin_write_MXVR_AP_CTL(val)		bfin_write16(MXVR_AP_CTL, val)
+#define bfin_read_MXVR_APRB_START_ADDR() 	bfin_read32(MXVR_APRB_START_ADDR)
+#define bfin_write_MXVR_APRB_START_ADDR(val) 	bfin_write32(MXVR_APRB_START_ADDR)
+#define bfin_read_MXVR_APRB_CURR_ADDR() 	bfin_read32(MXVR_APRB_CURR_ADDR)
+#define bfin_write_MXVR_APRB_CURR_ADDR(val) 	bfin_write32(MXVR_APRB_CURR_ADDR)
+#define bfin_read_MXVR_APTB_START_ADDR() 	bfin_read32(MXVR_APTB_START_ADDR)
+#define bfin_write_MXVR_APTB_START_ADDR(val) 	bfin_write32(MXVR_APTB_START_ADDR)
+#define bfin_read_MXVR_APTB_CURR_ADDR() 	bfin_read32(MXVR_APTB_CURR_ADDR)
+#define bfin_write_MXVR_APTB_CURR_ADDR(val) 	bfin_write32(MXVR_APTB_CURR_ADDR)
+
+/* MXVR Control Message Registers */
+
+#define bfin_read_MXVR_CM_CTL()			bfin_read32(MXVR_CM_CTL)
+#define bfin_write_MXVR_CM_CTL(val)		bfin_write32(MXVR_CM_CTL, val)
+#define bfin_read_MXVR_CMRB_START_ADDR() 	bfin_read32(MXVR_CMRB_START_ADDR)
+#define bfin_write_MXVR_CMRB_START_ADDR(val) 	bfin_write32(MXVR_CMRB_START_ADDR)
+#define bfin_read_MXVR_CMRB_CURR_ADDR() 	bfin_read32(MXVR_CMRB_CURR_ADDR)
+#define bfin_write_MXVR_CMRB_CURR_ADDR(val) 	bfin_write32(MXVR_CMRB_CURR_ADDR)
+#define bfin_read_MXVR_CMTB_START_ADDR() 	bfin_read32(MXVR_CMTB_START_ADDR)
+#define bfin_write_MXVR_CMTB_START_ADDR(val) 	bfin_write32(MXVR_CMTB_START_ADDR)
+#define bfin_read_MXVR_CMTB_CURR_ADDR() 	bfin_read32(MXVR_CMTB_CURR_ADDR)
+#define bfin_write_MXVR_CMTB_CURR_ADDR(val) 	bfin_write32(MXVR_CMTB_CURR_ADDR)
+
+/* MXVR Remote Read Registers */
+
+#define bfin_read_MXVR_RRDB_START_ADDR() 	bfin_read32(MXVR_RRDB_START_ADDR)
+#define bfin_write_MXVR_RRDB_START_ADDR(val) 	bfin_write32(MXVR_RRDB_START_ADDR)
+#define bfin_read_MXVR_RRDB_CURR_ADDR() 	bfin_read32(MXVR_RRDB_CURR_ADDR)
+#define bfin_write_MXVR_RRDB_CURR_ADDR(val) 	bfin_write32(MXVR_RRDB_CURR_ADDR)
+
+/* MXVR Pattern Data Registers */
+
+#define bfin_read_MXVR_PAT_DATA_0()		bfin_read32(MXVR_PAT_DATA_0)
+#define bfin_write_MXVR_PAT_DATA_0(val)		bfin_write32(MXVR_PAT_DATA_0, val)
+#define bfin_read_MXVR_PAT_EN_0()		bfin_read32(MXVR_PAT_EN_0)
+#define bfin_write_MXVR_PAT_EN_0(val)		bfin_write32(MXVR_PAT_EN_0, val)
+#define bfin_read_MXVR_PAT_DATA_1()		bfin_read32(MXVR_PAT_DATA_1)
+#define bfin_write_MXVR_PAT_DATA_1(val)		bfin_write32(MXVR_PAT_DATA_1, val)
+#define bfin_read_MXVR_PAT_EN_1()		bfin_read32(MXVR_PAT_EN_1)
+#define bfin_write_MXVR_PAT_EN_1(val)		bfin_write32(MXVR_PAT_EN_1, val)
+
+/* MXVR Frame Counter Registers */
+
+#define bfin_read_MXVR_FRAME_CNT_0()		bfin_read16(MXVR_FRAME_CNT_0)
+#define bfin_write_MXVR_FRAME_CNT_0(val)	bfin_write16(MXVR_FRAME_CNT_0, val)
+#define bfin_read_MXVR_FRAME_CNT_1()		bfin_read16(MXVR_FRAME_CNT_1)
+#define bfin_write_MXVR_FRAME_CNT_1(val)	bfin_write16(MXVR_FRAME_CNT_1, val)
+
+/* MXVR Routing Table Registers */
+
+#define bfin_read_MXVR_ROUTING_0()		bfin_read32(MXVR_ROUTING_0)
+#define bfin_write_MXVR_ROUTING_0(val)		bfin_write32(MXVR_ROUTING_0, val)
+#define bfin_read_MXVR_ROUTING_1()		bfin_read32(MXVR_ROUTING_1)
+#define bfin_write_MXVR_ROUTING_1(val)		bfin_write32(MXVR_ROUTING_1, val)
+#define bfin_read_MXVR_ROUTING_2()		bfin_read32(MXVR_ROUTING_2)
+#define bfin_write_MXVR_ROUTING_2(val)		bfin_write32(MXVR_ROUTING_2, val)
+#define bfin_read_MXVR_ROUTING_3()		bfin_read32(MXVR_ROUTING_3)
+#define bfin_write_MXVR_ROUTING_3(val)		bfin_write32(MXVR_ROUTING_3, val)
+#define bfin_read_MXVR_ROUTING_4()		bfin_read32(MXVR_ROUTING_4)
+#define bfin_write_MXVR_ROUTING_4(val)		bfin_write32(MXVR_ROUTING_4, val)
+#define bfin_read_MXVR_ROUTING_5()		bfin_read32(MXVR_ROUTING_5)
+#define bfin_write_MXVR_ROUTING_5(val)		bfin_write32(MXVR_ROUTING_5, val)
+#define bfin_read_MXVR_ROUTING_6()		bfin_read32(MXVR_ROUTING_6)
+#define bfin_write_MXVR_ROUTING_6(val)		bfin_write32(MXVR_ROUTING_6, val)
+#define bfin_read_MXVR_ROUTING_7()		bfin_read32(MXVR_ROUTING_7)
+#define bfin_write_MXVR_ROUTING_7(val)		bfin_write32(MXVR_ROUTING_7, val)
+#define bfin_read_MXVR_ROUTING_8()		bfin_read32(MXVR_ROUTING_8)
+#define bfin_write_MXVR_ROUTING_8(val)		bfin_write32(MXVR_ROUTING_8, val)
+#define bfin_read_MXVR_ROUTING_9()		bfin_read32(MXVR_ROUTING_9)
+#define bfin_write_MXVR_ROUTING_9(val)		bfin_write32(MXVR_ROUTING_9, val)
+#define bfin_read_MXVR_ROUTING_10()		bfin_read32(MXVR_ROUTING_10)
+#define bfin_write_MXVR_ROUTING_10(val)		bfin_write32(MXVR_ROUTING_10, val)
+#define bfin_read_MXVR_ROUTING_11()		bfin_read32(MXVR_ROUTING_11)
+#define bfin_write_MXVR_ROUTING_11(val)		bfin_write32(MXVR_ROUTING_11, val)
+#define bfin_read_MXVR_ROUTING_12()		bfin_read32(MXVR_ROUTING_12)
+#define bfin_write_MXVR_ROUTING_12(val)		bfin_write32(MXVR_ROUTING_12, val)
+#define bfin_read_MXVR_ROUTING_13()		bfin_read32(MXVR_ROUTING_13)
+#define bfin_write_MXVR_ROUTING_13(val)		bfin_write32(MXVR_ROUTING_13, val)
+#define bfin_read_MXVR_ROUTING_14()		bfin_read32(MXVR_ROUTING_14)
+#define bfin_write_MXVR_ROUTING_14(val)		bfin_write32(MXVR_ROUTING_14, val)
+
+/* MXVR Counter-Clock-Control Registers */
+
+#define bfin_read_MXVR_BLOCK_CNT()		bfin_read16(MXVR_BLOCK_CNT)
+#define bfin_write_MXVR_BLOCK_CNT(val)		bfin_write16(MXVR_BLOCK_CNT, val)
+#define bfin_read_MXVR_CLK_CTL()		bfin_read32(MXVR_CLK_CTL)
+#define bfin_write_MXVR_CLK_CTL(val)		bfin_write32(MXVR_CLK_CTL, val)
+#define bfin_read_MXVR_CDRPLL_CTL()		bfin_read32(MXVR_CDRPLL_CTL)
+#define bfin_write_MXVR_CDRPLL_CTL(val)		bfin_write32(MXVR_CDRPLL_CTL, val)
+#define bfin_read_MXVR_FMPLL_CTL()		bfin_read32(MXVR_FMPLL_CTL)
+#define bfin_write_MXVR_FMPLL_CTL(val)		bfin_write32(MXVR_FMPLL_CTL, val)
+#define bfin_read_MXVR_PIN_CTL()		bfin_read16(MXVR_PIN_CTL)
+#define bfin_write_MXVR_PIN_CTL(val)		bfin_write16(MXVR_PIN_CTL, val)
+#define bfin_read_MXVR_SCLK_CNT()		bfin_read16(MXVR_SCLK_CNT)
+#define bfin_write_MXVR_SCLK_CNT(val)		bfin_write16(MXVR_SCLK_CNT, val)
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define bfin_read_CAN1_MC1()		bfin_read16(CAN1_MC1)
+#define bfin_write_CAN1_MC1(val)	bfin_write16(CAN1_MC1, val)
+#define bfin_read_CAN1_MD1()		bfin_read16(CAN1_MD1)
+#define bfin_write_CAN1_MD1(val)	bfin_write16(CAN1_MD1, val)
+#define bfin_read_CAN1_TRS1()		bfin_read16(CAN1_TRS1)
+#define bfin_write_CAN1_TRS1(val)	bfin_write16(CAN1_TRS1, val)
+#define bfin_read_CAN1_TRR1()		bfin_read16(CAN1_TRR1)
+#define bfin_write_CAN1_TRR1(val)	bfin_write16(CAN1_TRR1, val)
+#define bfin_read_CAN1_TA1()		bfin_read16(CAN1_TA1)
+#define bfin_write_CAN1_TA1(val)	bfin_write16(CAN1_TA1, val)
+#define bfin_read_CAN1_AA1()		bfin_read16(CAN1_AA1)
+#define bfin_write_CAN1_AA1(val)	bfin_write16(CAN1_AA1, val)
+#define bfin_read_CAN1_RMP1()		bfin_read16(CAN1_RMP1)
+#define bfin_write_CAN1_RMP1(val)	bfin_write16(CAN1_RMP1, val)
+#define bfin_read_CAN1_RML1()		bfin_read16(CAN1_RML1)
+#define bfin_write_CAN1_RML1(val)	bfin_write16(CAN1_RML1, val)
+#define bfin_read_CAN1_MBTIF1()		bfin_read16(CAN1_MBTIF1)
+#define bfin_write_CAN1_MBTIF1(val)	bfin_write16(CAN1_MBTIF1, val)
+#define bfin_read_CAN1_MBRIF1()		bfin_read16(CAN1_MBRIF1)
+#define bfin_write_CAN1_MBRIF1(val)	bfin_write16(CAN1_MBRIF1, val)
+#define bfin_read_CAN1_MBIM1()		bfin_read16(CAN1_MBIM1)
+#define bfin_write_CAN1_MBIM1(val)	bfin_write16(CAN1_MBIM1, val)
+#define bfin_read_CAN1_RFH1()		bfin_read16(CAN1_RFH1)
+#define bfin_write_CAN1_RFH1(val)	bfin_write16(CAN1_RFH1, val)
+#define bfin_read_CAN1_OPSS1()		bfin_read16(CAN1_OPSS1)
+#define bfin_write_CAN1_OPSS1(val)	bfin_write16(CAN1_OPSS1, val)
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define bfin_read_CAN1_MC2()		bfin_read16(CAN1_MC2)
+#define bfin_write_CAN1_MC2(val)	bfin_write16(CAN1_MC2, val)
+#define bfin_read_CAN1_MD2()		bfin_read16(CAN1_MD2)
+#define bfin_write_CAN1_MD2(val)	bfin_write16(CAN1_MD2, val)
+#define bfin_read_CAN1_TRS2()		bfin_read16(CAN1_TRS2)
+#define bfin_write_CAN1_TRS2(val)	bfin_write16(CAN1_TRS2, val)
+#define bfin_read_CAN1_TRR2()		bfin_read16(CAN1_TRR2)
+#define bfin_write_CAN1_TRR2(val)	bfin_write16(CAN1_TRR2, val)
+#define bfin_read_CAN1_TA2()		bfin_read16(CAN1_TA2)
+#define bfin_write_CAN1_TA2(val)	bfin_write16(CAN1_TA2, val)
+#define bfin_read_CAN1_AA2()		bfin_read16(CAN1_AA2)
+#define bfin_write_CAN1_AA2(val)	bfin_write16(CAN1_AA2, val)
+#define bfin_read_CAN1_RMP2()		bfin_read16(CAN1_RMP2)
+#define bfin_write_CAN1_RMP2(val)	bfin_write16(CAN1_RMP2, val)
+#define bfin_read_CAN1_RML2()		bfin_read16(CAN1_RML2)
+#define bfin_write_CAN1_RML2(val)	bfin_write16(CAN1_RML2, val)
+#define bfin_read_CAN1_MBTIF2()		bfin_read16(CAN1_MBTIF2)
+#define bfin_write_CAN1_MBTIF2(val)	bfin_write16(CAN1_MBTIF2, val)
+#define bfin_read_CAN1_MBRIF2()		bfin_read16(CAN1_MBRIF2)
+#define bfin_write_CAN1_MBRIF2(val)	bfin_write16(CAN1_MBRIF2, val)
+#define bfin_read_CAN1_MBIM2()		bfin_read16(CAN1_MBIM2)
+#define bfin_write_CAN1_MBIM2(val)	bfin_write16(CAN1_MBIM2, val)
+#define bfin_read_CAN1_RFH2()		bfin_read16(CAN1_RFH2)
+#define bfin_write_CAN1_RFH2(val)	bfin_write16(CAN1_RFH2, val)
+#define bfin_read_CAN1_OPSS2()		bfin_read16(CAN1_OPSS2)
+#define bfin_write_CAN1_OPSS2(val)	bfin_write16(CAN1_OPSS2, val)
+
+/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */
+
+#define bfin_read_CAN1_CLOCK()		bfin_read16(CAN1_CLOCK)
+#define bfin_write_CAN1_CLOCK(val)	bfin_write16(CAN1_CLOCK, val)
+#define bfin_read_CAN1_TIMING()		bfin_read16(CAN1_TIMING)
+#define bfin_write_CAN1_TIMING(val)	bfin_write16(CAN1_TIMING, val)
+#define bfin_read_CAN1_DEBUG()		bfin_read16(CAN1_DEBUG)
+#define bfin_write_CAN1_DEBUG(val)	bfin_write16(CAN1_DEBUG, val)
+#define bfin_read_CAN1_STATUS()		bfin_read16(CAN1_STATUS)
+#define bfin_write_CAN1_STATUS(val)	bfin_write16(CAN1_STATUS, val)
+#define bfin_read_CAN1_CEC()		bfin_read16(CAN1_CEC)
+#define bfin_write_CAN1_CEC(val)	bfin_write16(CAN1_CEC, val)
+#define bfin_read_CAN1_GIS()		bfin_read16(CAN1_GIS)
+#define bfin_write_CAN1_GIS(val)	bfin_write16(CAN1_GIS, val)
+#define bfin_read_CAN1_GIM()		bfin_read16(CAN1_GIM)
+#define bfin_write_CAN1_GIM(val)	bfin_write16(CAN1_GIM, val)
+#define bfin_read_CAN1_GIF()		bfin_read16(CAN1_GIF)
+#define bfin_write_CAN1_GIF(val)	bfin_write16(CAN1_GIF, val)
+#define bfin_read_CAN1_CONTROL()	bfin_read16(CAN1_CONTROL)
+#define bfin_write_CAN1_CONTROL(val)	bfin_write16(CAN1_CONTROL, val)
+#define bfin_read_CAN1_INTR()		bfin_read16(CAN1_INTR)
+#define bfin_write_CAN1_INTR(val)	bfin_write16(CAN1_INTR, val)
+#define bfin_read_CAN1_MBTD()		bfin_read16(CAN1_MBTD)
+#define bfin_write_CAN1_MBTD(val)	bfin_write16(CAN1_MBTD, val)
+#define bfin_read_CAN1_EWR()		bfin_read16(CAN1_EWR)
+#define bfin_write_CAN1_EWR(val)	bfin_write16(CAN1_EWR, val)
+#define bfin_read_CAN1_ESR()		bfin_read16(CAN1_ESR)
+#define bfin_write_CAN1_ESR(val)	bfin_write16(CAN1_ESR, val)
+#define bfin_read_CAN1_UCCNT()		bfin_read16(CAN1_UCCNT)
+#define bfin_write_CAN1_UCCNT(val)	bfin_write16(CAN1_UCCNT, val)
+#define bfin_read_CAN1_UCRC()		bfin_read16(CAN1_UCRC)
+#define bfin_write_CAN1_UCRC(val)	bfin_write16(CAN1_UCRC, val)
+#define bfin_read_CAN1_UCCNF()		bfin_read16(CAN1_UCCNF)
+#define bfin_write_CAN1_UCCNF(val)	bfin_write16(CAN1_UCCNF, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM00L()		bfin_read16(CAN1_AM00L)
+#define bfin_write_CAN1_AM00L(val)	bfin_write16(CAN1_AM00L, val)
+#define bfin_read_CAN1_AM00H()		bfin_read16(CAN1_AM00H)
+#define bfin_write_CAN1_AM00H(val)	bfin_write16(CAN1_AM00H, val)
+#define bfin_read_CAN1_AM01L()		bfin_read16(CAN1_AM01L)
+#define bfin_write_CAN1_AM01L(val)	bfin_write16(CAN1_AM01L, val)
+#define bfin_read_CAN1_AM01H()		bfin_read16(CAN1_AM01H)
+#define bfin_write_CAN1_AM01H(val)	bfin_write16(CAN1_AM01H, val)
+#define bfin_read_CAN1_AM02L()		bfin_read16(CAN1_AM02L)
+#define bfin_write_CAN1_AM02L(val)	bfin_write16(CAN1_AM02L, val)
+#define bfin_read_CAN1_AM02H()		bfin_read16(CAN1_AM02H)
+#define bfin_write_CAN1_AM02H(val)	bfin_write16(CAN1_AM02H, val)
+#define bfin_read_CAN1_AM03L()		bfin_read16(CAN1_AM03L)
+#define bfin_write_CAN1_AM03L(val)	bfin_write16(CAN1_AM03L, val)
+#define bfin_read_CAN1_AM03H()		bfin_read16(CAN1_AM03H)
+#define bfin_write_CAN1_AM03H(val)	bfin_write16(CAN1_AM03H, val)
+#define bfin_read_CAN1_AM04L()		bfin_read16(CAN1_AM04L)
+#define bfin_write_CAN1_AM04L(val)	bfin_write16(CAN1_AM04L, val)
+#define bfin_read_CAN1_AM04H()		bfin_read16(CAN1_AM04H)
+#define bfin_write_CAN1_AM04H(val)	bfin_write16(CAN1_AM04H, val)
+#define bfin_read_CAN1_AM05L()		bfin_read16(CAN1_AM05L)
+#define bfin_write_CAN1_AM05L(val)	bfin_write16(CAN1_AM05L, val)
+#define bfin_read_CAN1_AM05H()		bfin_read16(CAN1_AM05H)
+#define bfin_write_CAN1_AM05H(val)	bfin_write16(CAN1_AM05H, val)
+#define bfin_read_CAN1_AM06L()		bfin_read16(CAN1_AM06L)
+#define bfin_write_CAN1_AM06L(val)	bfin_write16(CAN1_AM06L, val)
+#define bfin_read_CAN1_AM06H()		bfin_read16(CAN1_AM06H)
+#define bfin_write_CAN1_AM06H(val)	bfin_write16(CAN1_AM06H, val)
+#define bfin_read_CAN1_AM07L()		bfin_read16(CAN1_AM07L)
+#define bfin_write_CAN1_AM07L(val)	bfin_write16(CAN1_AM07L, val)
+#define bfin_read_CAN1_AM07H()		bfin_read16(CAN1_AM07H)
+#define bfin_write_CAN1_AM07H(val)	bfin_write16(CAN1_AM07H, val)
+#define bfin_read_CAN1_AM08L()		bfin_read16(CAN1_AM08L)
+#define bfin_write_CAN1_AM08L(val)	bfin_write16(CAN1_AM08L, val)
+#define bfin_read_CAN1_AM08H()		bfin_read16(CAN1_AM08H)
+#define bfin_write_CAN1_AM08H(val)	bfin_write16(CAN1_AM08H, val)
+#define bfin_read_CAN1_AM09L()		bfin_read16(CAN1_AM09L)
+#define bfin_write_CAN1_AM09L(val)	bfin_write16(CAN1_AM09L, val)
+#define bfin_read_CAN1_AM09H()		bfin_read16(CAN1_AM09H)
+#define bfin_write_CAN1_AM09H(val)	bfin_write16(CAN1_AM09H, val)
+#define bfin_read_CAN1_AM10L()		bfin_read16(CAN1_AM10L)
+#define bfin_write_CAN1_AM10L(val)	bfin_write16(CAN1_AM10L, val)
+#define bfin_read_CAN1_AM10H()		bfin_read16(CAN1_AM10H)
+#define bfin_write_CAN1_AM10H(val)	bfin_write16(CAN1_AM10H, val)
+#define bfin_read_CAN1_AM11L()		bfin_read16(CAN1_AM11L)
+#define bfin_write_CAN1_AM11L(val)	bfin_write16(CAN1_AM11L, val)
+#define bfin_read_CAN1_AM11H()		bfin_read16(CAN1_AM11H)
+#define bfin_write_CAN1_AM11H(val)	bfin_write16(CAN1_AM11H, val)
+#define bfin_read_CAN1_AM12L()		bfin_read16(CAN1_AM12L)
+#define bfin_write_CAN1_AM12L(val)	bfin_write16(CAN1_AM12L, val)
+#define bfin_read_CAN1_AM12H()		bfin_read16(CAN1_AM12H)
+#define bfin_write_CAN1_AM12H(val)	bfin_write16(CAN1_AM12H, val)
+#define bfin_read_CAN1_AM13L()		bfin_read16(CAN1_AM13L)
+#define bfin_write_CAN1_AM13L(val)	bfin_write16(CAN1_AM13L, val)
+#define bfin_read_CAN1_AM13H()		bfin_read16(CAN1_AM13H)
+#define bfin_write_CAN1_AM13H(val)	bfin_write16(CAN1_AM13H, val)
+#define bfin_read_CAN1_AM14L()		bfin_read16(CAN1_AM14L)
+#define bfin_write_CAN1_AM14L(val)	bfin_write16(CAN1_AM14L, val)
+#define bfin_read_CAN1_AM14H()		bfin_read16(CAN1_AM14H)
+#define bfin_write_CAN1_AM14H(val)	bfin_write16(CAN1_AM14H, val)
+#define bfin_read_CAN1_AM15L()		bfin_read16(CAN1_AM15L)
+#define bfin_write_CAN1_AM15L(val)	bfin_write16(CAN1_AM15L, val)
+#define bfin_read_CAN1_AM15H()		bfin_read16(CAN1_AM15H)
+#define bfin_write_CAN1_AM15H(val)	bfin_write16(CAN1_AM15H, val)
+
+/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN1_AM16L()		bfin_read16(CAN1_AM16L)
+#define bfin_write_CAN1_AM16L(val)	bfin_write16(CAN1_AM16L, val)
+#define bfin_read_CAN1_AM16H()		bfin_read16(CAN1_AM16H)
+#define bfin_write_CAN1_AM16H(val)	bfin_write16(CAN1_AM16H, val)
+#define bfin_read_CAN1_AM17L()		bfin_read16(CAN1_AM17L)
+#define bfin_write_CAN1_AM17L(val)	bfin_write16(CAN1_AM17L, val)
+#define bfin_read_CAN1_AM17H()		bfin_read16(CAN1_AM17H)
+#define bfin_write_CAN1_AM17H(val)	bfin_write16(CAN1_AM17H, val)
+#define bfin_read_CAN1_AM18L()		bfin_read16(CAN1_AM18L)
+#define bfin_write_CAN1_AM18L(val)	bfin_write16(CAN1_AM18L, val)
+#define bfin_read_CAN1_AM18H()		bfin_read16(CAN1_AM18H)
+#define bfin_write_CAN1_AM18H(val)	bfin_write16(CAN1_AM18H, val)
+#define bfin_read_CAN1_AM19L()		bfin_read16(CAN1_AM19L)
+#define bfin_write_CAN1_AM19L(val)	bfin_write16(CAN1_AM19L, val)
+#define bfin_read_CAN1_AM19H()		bfin_read16(CAN1_AM19H)
+#define bfin_write_CAN1_AM19H(val)	bfin_write16(CAN1_AM19H, val)
+#define bfin_read_CAN1_AM20L()		bfin_read16(CAN1_AM20L)
+#define bfin_write_CAN1_AM20L(val)	bfin_write16(CAN1_AM20L, val)
+#define bfin_read_CAN1_AM20H()		bfin_read16(CAN1_AM20H)
+#define bfin_write_CAN1_AM20H(val)	bfin_write16(CAN1_AM20H, val)
+#define bfin_read_CAN1_AM21L()		bfin_read16(CAN1_AM21L)
+#define bfin_write_CAN1_AM21L(val)	bfin_write16(CAN1_AM21L, val)
+#define bfin_read_CAN1_AM21H()		bfin_read16(CAN1_AM21H)
+#define bfin_write_CAN1_AM21H(val)	bfin_write16(CAN1_AM21H, val)
+#define bfin_read_CAN1_AM22L()		bfin_read16(CAN1_AM22L)
+#define bfin_write_CAN1_AM22L(val)	bfin_write16(CAN1_AM22L, val)
+#define bfin_read_CAN1_AM22H()		bfin_read16(CAN1_AM22H)
+#define bfin_write_CAN1_AM22H(val)	bfin_write16(CAN1_AM22H, val)
+#define bfin_read_CAN1_AM23L()		bfin_read16(CAN1_AM23L)
+#define bfin_write_CAN1_AM23L(val)	bfin_write16(CAN1_AM23L, val)
+#define bfin_read_CAN1_AM23H()		bfin_read16(CAN1_AM23H)
+#define bfin_write_CAN1_AM23H(val)	bfin_write16(CAN1_AM23H, val)
+#define bfin_read_CAN1_AM24L()		bfin_read16(CAN1_AM24L)
+#define bfin_write_CAN1_AM24L(val)	bfin_write16(CAN1_AM24L, val)
+#define bfin_read_CAN1_AM24H()		bfin_read16(CAN1_AM24H)
+#define bfin_write_CAN1_AM24H(val)	bfin_write16(CAN1_AM24H, val)
+#define bfin_read_CAN1_AM25L()		bfin_read16(CAN1_AM25L)
+#define bfin_write_CAN1_AM25L(val)	bfin_write16(CAN1_AM25L, val)
+#define bfin_read_CAN1_AM25H()		bfin_read16(CAN1_AM25H)
+#define bfin_write_CAN1_AM25H(val)	bfin_write16(CAN1_AM25H, val)
+#define bfin_read_CAN1_AM26L()		bfin_read16(CAN1_AM26L)
+#define bfin_write_CAN1_AM26L(val)	bfin_write16(CAN1_AM26L, val)
+#define bfin_read_CAN1_AM26H()		bfin_read16(CAN1_AM26H)
+#define bfin_write_CAN1_AM26H(val)	bfin_write16(CAN1_AM26H, val)
+#define bfin_read_CAN1_AM27L()		bfin_read16(CAN1_AM27L)
+#define bfin_write_CAN1_AM27L(val)	bfin_write16(CAN1_AM27L, val)
+#define bfin_read_CAN1_AM27H()		bfin_read16(CAN1_AM27H)
+#define bfin_write_CAN1_AM27H(val)	bfin_write16(CAN1_AM27H, val)
+#define bfin_read_CAN1_AM28L()		bfin_read16(CAN1_AM28L)
+#define bfin_write_CAN1_AM28L(val)	bfin_write16(CAN1_AM28L, val)
+#define bfin_read_CAN1_AM28H()		bfin_read16(CAN1_AM28H)
+#define bfin_write_CAN1_AM28H(val)	bfin_write16(CAN1_AM28H, val)
+#define bfin_read_CAN1_AM29L()		bfin_read16(CAN1_AM29L)
+#define bfin_write_CAN1_AM29L(val)	bfin_write16(CAN1_AM29L, val)
+#define bfin_read_CAN1_AM29H()		bfin_read16(CAN1_AM29H)
+#define bfin_write_CAN1_AM29H(val)	bfin_write16(CAN1_AM29H, val)
+#define bfin_read_CAN1_AM30L()		bfin_read16(CAN1_AM30L)
+#define bfin_write_CAN1_AM30L(val)	bfin_write16(CAN1_AM30L, val)
+#define bfin_read_CAN1_AM30H()		bfin_read16(CAN1_AM30H)
+#define bfin_write_CAN1_AM30H(val)	bfin_write16(CAN1_AM30H, val)
+#define bfin_read_CAN1_AM31L()		bfin_read16(CAN1_AM31L)
+#define bfin_write_CAN1_AM31L(val)	bfin_write16(CAN1_AM31L, val)
+#define bfin_read_CAN1_AM31H()		bfin_read16(CAN1_AM31H)
+#define bfin_write_CAN1_AM31H(val)	bfin_write16(CAN1_AM31H, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB00_DATA0()		bfin_read16(CAN1_MB00_DATA0)
+#define bfin_write_CAN1_MB00_DATA0(val)		bfin_write16(CAN1_MB00_DATA0, val)
+#define bfin_read_CAN1_MB00_DATA1()		bfin_read16(CAN1_MB00_DATA1)
+#define bfin_write_CAN1_MB00_DATA1(val)		bfin_write16(CAN1_MB00_DATA1, val)
+#define bfin_read_CAN1_MB00_DATA2()		bfin_read16(CAN1_MB00_DATA2)
+#define bfin_write_CAN1_MB00_DATA2(val)		bfin_write16(CAN1_MB00_DATA2, val)
+#define bfin_read_CAN1_MB00_DATA3()		bfin_read16(CAN1_MB00_DATA3)
+#define bfin_write_CAN1_MB00_DATA3(val)		bfin_write16(CAN1_MB00_DATA3, val)
+#define bfin_read_CAN1_MB00_LENGTH()		bfin_read16(CAN1_MB00_LENGTH)
+#define bfin_write_CAN1_MB00_LENGTH(val)	bfin_write16(CAN1_MB00_LENGTH, val)
+#define bfin_read_CAN1_MB00_TIMESTAMP()		bfin_read16(CAN1_MB00_TIMESTAMP)
+#define bfin_write_CAN1_MB00_TIMESTAMP(val)	bfin_write16(CAN1_MB00_TIMESTAMP, val)
+#define bfin_read_CAN1_MB00_ID0()		bfin_read16(CAN1_MB00_ID0)
+#define bfin_write_CAN1_MB00_ID0(val)		bfin_write16(CAN1_MB00_ID0, val)
+#define bfin_read_CAN1_MB00_ID1()		bfin_read16(CAN1_MB00_ID1)
+#define bfin_write_CAN1_MB00_ID1(val)		bfin_write16(CAN1_MB00_ID1, val)
+#define bfin_read_CAN1_MB01_DATA0()		bfin_read16(CAN1_MB01_DATA0)
+#define bfin_write_CAN1_MB01_DATA0(val)		bfin_write16(CAN1_MB01_DATA0, val)
+#define bfin_read_CAN1_MB01_DATA1()		bfin_read16(CAN1_MB01_DATA1)
+#define bfin_write_CAN1_MB01_DATA1(val)		bfin_write16(CAN1_MB01_DATA1, val)
+#define bfin_read_CAN1_MB01_DATA2()		bfin_read16(CAN1_MB01_DATA2)
+#define bfin_write_CAN1_MB01_DATA2(val)		bfin_write16(CAN1_MB01_DATA2, val)
+#define bfin_read_CAN1_MB01_DATA3()		bfin_read16(CAN1_MB01_DATA3)
+#define bfin_write_CAN1_MB01_DATA3(val)		bfin_write16(CAN1_MB01_DATA3, val)
+#define bfin_read_CAN1_MB01_LENGTH()		bfin_read16(CAN1_MB01_LENGTH)
+#define bfin_write_CAN1_MB01_LENGTH(val)	bfin_write16(CAN1_MB01_LENGTH, val)
+#define bfin_read_CAN1_MB01_TIMESTAMP()		bfin_read16(CAN1_MB01_TIMESTAMP)
+#define bfin_write_CAN1_MB01_TIMESTAMP(val)	bfin_write16(CAN1_MB01_TIMESTAMP, val)
+#define bfin_read_CAN1_MB01_ID0()		bfin_read16(CAN1_MB01_ID0)
+#define bfin_write_CAN1_MB01_ID0(val)		bfin_write16(CAN1_MB01_ID0, val)
+#define bfin_read_CAN1_MB01_ID1()		bfin_read16(CAN1_MB01_ID1)
+#define bfin_write_CAN1_MB01_ID1(val)		bfin_write16(CAN1_MB01_ID1, val)
+#define bfin_read_CAN1_MB02_DATA0()		bfin_read16(CAN1_MB02_DATA0)
+#define bfin_write_CAN1_MB02_DATA0(val)		bfin_write16(CAN1_MB02_DATA0, val)
+#define bfin_read_CAN1_MB02_DATA1()		bfin_read16(CAN1_MB02_DATA1)
+#define bfin_write_CAN1_MB02_DATA1(val)		bfin_write16(CAN1_MB02_DATA1, val)
+#define bfin_read_CAN1_MB02_DATA2()		bfin_read16(CAN1_MB02_DATA2)
+#define bfin_write_CAN1_MB02_DATA2(val)		bfin_write16(CAN1_MB02_DATA2, val)
+#define bfin_read_CAN1_MB02_DATA3()		bfin_read16(CAN1_MB02_DATA3)
+#define bfin_write_CAN1_MB02_DATA3(val)		bfin_write16(CAN1_MB02_DATA3, val)
+#define bfin_read_CAN1_MB02_LENGTH()		bfin_read16(CAN1_MB02_LENGTH)
+#define bfin_write_CAN1_MB02_LENGTH(val)	bfin_write16(CAN1_MB02_LENGTH, val)
+#define bfin_read_CAN1_MB02_TIMESTAMP()		bfin_read16(CAN1_MB02_TIMESTAMP)
+#define bfin_write_CAN1_MB02_TIMESTAMP(val)	bfin_write16(CAN1_MB02_TIMESTAMP, val)
+#define bfin_read_CAN1_MB02_ID0()		bfin_read16(CAN1_MB02_ID0)
+#define bfin_write_CAN1_MB02_ID0(val)		bfin_write16(CAN1_MB02_ID0, val)
+#define bfin_read_CAN1_MB02_ID1()		bfin_read16(CAN1_MB02_ID1)
+#define bfin_write_CAN1_MB02_ID1(val)		bfin_write16(CAN1_MB02_ID1, val)
+#define bfin_read_CAN1_MB03_DATA0()		bfin_read16(CAN1_MB03_DATA0)
+#define bfin_write_CAN1_MB03_DATA0(val)		bfin_write16(CAN1_MB03_DATA0, val)
+#define bfin_read_CAN1_MB03_DATA1()		bfin_read16(CAN1_MB03_DATA1)
+#define bfin_write_CAN1_MB03_DATA1(val)		bfin_write16(CAN1_MB03_DATA1, val)
+#define bfin_read_CAN1_MB03_DATA2()		bfin_read16(CAN1_MB03_DATA2)
+#define bfin_write_CAN1_MB03_DATA2(val)		bfin_write16(CAN1_MB03_DATA2, val)
+#define bfin_read_CAN1_MB03_DATA3()		bfin_read16(CAN1_MB03_DATA3)
+#define bfin_write_CAN1_MB03_DATA3(val)		bfin_write16(CAN1_MB03_DATA3, val)
+#define bfin_read_CAN1_MB03_LENGTH()		bfin_read16(CAN1_MB03_LENGTH)
+#define bfin_write_CAN1_MB03_LENGTH(val)	bfin_write16(CAN1_MB03_LENGTH, val)
+#define bfin_read_CAN1_MB03_TIMESTAMP()		bfin_read16(CAN1_MB03_TIMESTAMP)
+#define bfin_write_CAN1_MB03_TIMESTAMP(val)	bfin_write16(CAN1_MB03_TIMESTAMP, val)
+#define bfin_read_CAN1_MB03_ID0()		bfin_read16(CAN1_MB03_ID0)
+#define bfin_write_CAN1_MB03_ID0(val)		bfin_write16(CAN1_MB03_ID0, val)
+#define bfin_read_CAN1_MB03_ID1()		bfin_read16(CAN1_MB03_ID1)
+#define bfin_write_CAN1_MB03_ID1(val)		bfin_write16(CAN1_MB03_ID1, val)
+#define bfin_read_CAN1_MB04_DATA0()		bfin_read16(CAN1_MB04_DATA0)
+#define bfin_write_CAN1_MB04_DATA0(val)		bfin_write16(CAN1_MB04_DATA0, val)
+#define bfin_read_CAN1_MB04_DATA1()		bfin_read16(CAN1_MB04_DATA1)
+#define bfin_write_CAN1_MB04_DATA1(val)		bfin_write16(CAN1_MB04_DATA1, val)
+#define bfin_read_CAN1_MB04_DATA2()		bfin_read16(CAN1_MB04_DATA2)
+#define bfin_write_CAN1_MB04_DATA2(val)		bfin_write16(CAN1_MB04_DATA2, val)
+#define bfin_read_CAN1_MB04_DATA3()		bfin_read16(CAN1_MB04_DATA3)
+#define bfin_write_CAN1_MB04_DATA3(val)		bfin_write16(CAN1_MB04_DATA3, val)
+#define bfin_read_CAN1_MB04_LENGTH()		bfin_read16(CAN1_MB04_LENGTH)
+#define bfin_write_CAN1_MB04_LENGTH(val)	bfin_write16(CAN1_MB04_LENGTH, val)
+#define bfin_read_CAN1_MB04_TIMESTAMP()		bfin_read16(CAN1_MB04_TIMESTAMP)
+#define bfin_write_CAN1_MB04_TIMESTAMP(val)	bfin_write16(CAN1_MB04_TIMESTAMP, val)
+#define bfin_read_CAN1_MB04_ID0()		bfin_read16(CAN1_MB04_ID0)
+#define bfin_write_CAN1_MB04_ID0(val)		bfin_write16(CAN1_MB04_ID0, val)
+#define bfin_read_CAN1_MB04_ID1()		bfin_read16(CAN1_MB04_ID1)
+#define bfin_write_CAN1_MB04_ID1(val)		bfin_write16(CAN1_MB04_ID1, val)
+#define bfin_read_CAN1_MB05_DATA0()		bfin_read16(CAN1_MB05_DATA0)
+#define bfin_write_CAN1_MB05_DATA0(val)		bfin_write16(CAN1_MB05_DATA0, val)
+#define bfin_read_CAN1_MB05_DATA1()		bfin_read16(CAN1_MB05_DATA1)
+#define bfin_write_CAN1_MB05_DATA1(val)		bfin_write16(CAN1_MB05_DATA1, val)
+#define bfin_read_CAN1_MB05_DATA2()		bfin_read16(CAN1_MB05_DATA2)
+#define bfin_write_CAN1_MB05_DATA2(val)		bfin_write16(CAN1_MB05_DATA2, val)
+#define bfin_read_CAN1_MB05_DATA3()		bfin_read16(CAN1_MB05_DATA3)
+#define bfin_write_CAN1_MB05_DATA3(val)		bfin_write16(CAN1_MB05_DATA3, val)
+#define bfin_read_CAN1_MB05_LENGTH()		bfin_read16(CAN1_MB05_LENGTH)
+#define bfin_write_CAN1_MB05_LENGTH(val)	bfin_write16(CAN1_MB05_LENGTH, val)
+#define bfin_read_CAN1_MB05_TIMESTAMP()		bfin_read16(CAN1_MB05_TIMESTAMP)
+#define bfin_write_CAN1_MB05_TIMESTAMP(val)	bfin_write16(CAN1_MB05_TIMESTAMP, val)
+#define bfin_read_CAN1_MB05_ID0()		bfin_read16(CAN1_MB05_ID0)
+#define bfin_write_CAN1_MB05_ID0(val)		bfin_write16(CAN1_MB05_ID0, val)
+#define bfin_read_CAN1_MB05_ID1()		bfin_read16(CAN1_MB05_ID1)
+#define bfin_write_CAN1_MB05_ID1(val)		bfin_write16(CAN1_MB05_ID1, val)
+#define bfin_read_CAN1_MB06_DATA0()		bfin_read16(CAN1_MB06_DATA0)
+#define bfin_write_CAN1_MB06_DATA0(val)		bfin_write16(CAN1_MB06_DATA0, val)
+#define bfin_read_CAN1_MB06_DATA1()		bfin_read16(CAN1_MB06_DATA1)
+#define bfin_write_CAN1_MB06_DATA1(val)		bfin_write16(CAN1_MB06_DATA1, val)
+#define bfin_read_CAN1_MB06_DATA2()		bfin_read16(CAN1_MB06_DATA2)
+#define bfin_write_CAN1_MB06_DATA2(val)		bfin_write16(CAN1_MB06_DATA2, val)
+#define bfin_read_CAN1_MB06_DATA3()		bfin_read16(CAN1_MB06_DATA3)
+#define bfin_write_CAN1_MB06_DATA3(val)		bfin_write16(CAN1_MB06_DATA3, val)
+#define bfin_read_CAN1_MB06_LENGTH()		bfin_read16(CAN1_MB06_LENGTH)
+#define bfin_write_CAN1_MB06_LENGTH(val)	bfin_write16(CAN1_MB06_LENGTH, val)
+#define bfin_read_CAN1_MB06_TIMESTAMP()		bfin_read16(CAN1_MB06_TIMESTAMP)
+#define bfin_write_CAN1_MB06_TIMESTAMP(val)	bfin_write16(CAN1_MB06_TIMESTAMP, val)
+#define bfin_read_CAN1_MB06_ID0()		bfin_read16(CAN1_MB06_ID0)
+#define bfin_write_CAN1_MB06_ID0(val)		bfin_write16(CAN1_MB06_ID0, val)
+#define bfin_read_CAN1_MB06_ID1()		bfin_read16(CAN1_MB06_ID1)
+#define bfin_write_CAN1_MB06_ID1(val)		bfin_write16(CAN1_MB06_ID1, val)
+#define bfin_read_CAN1_MB07_DATA0()		bfin_read16(CAN1_MB07_DATA0)
+#define bfin_write_CAN1_MB07_DATA0(val)		bfin_write16(CAN1_MB07_DATA0, val)
+#define bfin_read_CAN1_MB07_DATA1()		bfin_read16(CAN1_MB07_DATA1)
+#define bfin_write_CAN1_MB07_DATA1(val)		bfin_write16(CAN1_MB07_DATA1, val)
+#define bfin_read_CAN1_MB07_DATA2()		bfin_read16(CAN1_MB07_DATA2)
+#define bfin_write_CAN1_MB07_DATA2(val)		bfin_write16(CAN1_MB07_DATA2, val)
+#define bfin_read_CAN1_MB07_DATA3()		bfin_read16(CAN1_MB07_DATA3)
+#define bfin_write_CAN1_MB07_DATA3(val)		bfin_write16(CAN1_MB07_DATA3, val)
+#define bfin_read_CAN1_MB07_LENGTH()		bfin_read16(CAN1_MB07_LENGTH)
+#define bfin_write_CAN1_MB07_LENGTH(val)	bfin_write16(CAN1_MB07_LENGTH, val)
+#define bfin_read_CAN1_MB07_TIMESTAMP()		bfin_read16(CAN1_MB07_TIMESTAMP)
+#define bfin_write_CAN1_MB07_TIMESTAMP(val)	bfin_write16(CAN1_MB07_TIMESTAMP, val)
+#define bfin_read_CAN1_MB07_ID0()		bfin_read16(CAN1_MB07_ID0)
+#define bfin_write_CAN1_MB07_ID0(val)		bfin_write16(CAN1_MB07_ID0, val)
+#define bfin_read_CAN1_MB07_ID1()		bfin_read16(CAN1_MB07_ID1)
+#define bfin_write_CAN1_MB07_ID1(val)		bfin_write16(CAN1_MB07_ID1, val)
+#define bfin_read_CAN1_MB08_DATA0()		bfin_read16(CAN1_MB08_DATA0)
+#define bfin_write_CAN1_MB08_DATA0(val)		bfin_write16(CAN1_MB08_DATA0, val)
+#define bfin_read_CAN1_MB08_DATA1()		bfin_read16(CAN1_MB08_DATA1)
+#define bfin_write_CAN1_MB08_DATA1(val)		bfin_write16(CAN1_MB08_DATA1, val)
+#define bfin_read_CAN1_MB08_DATA2()		bfin_read16(CAN1_MB08_DATA2)
+#define bfin_write_CAN1_MB08_DATA2(val)		bfin_write16(CAN1_MB08_DATA2, val)
+#define bfin_read_CAN1_MB08_DATA3()		bfin_read16(CAN1_MB08_DATA3)
+#define bfin_write_CAN1_MB08_DATA3(val)		bfin_write16(CAN1_MB08_DATA3, val)
+#define bfin_read_CAN1_MB08_LENGTH()		bfin_read16(CAN1_MB08_LENGTH)
+#define bfin_write_CAN1_MB08_LENGTH(val)	bfin_write16(CAN1_MB08_LENGTH, val)
+#define bfin_read_CAN1_MB08_TIMESTAMP()		bfin_read16(CAN1_MB08_TIMESTAMP)
+#define bfin_write_CAN1_MB08_TIMESTAMP(val)	bfin_write16(CAN1_MB08_TIMESTAMP, val)
+#define bfin_read_CAN1_MB08_ID0()		bfin_read16(CAN1_MB08_ID0)
+#define bfin_write_CAN1_MB08_ID0(val)		bfin_write16(CAN1_MB08_ID0, val)
+#define bfin_read_CAN1_MB08_ID1()		bfin_read16(CAN1_MB08_ID1)
+#define bfin_write_CAN1_MB08_ID1(val)		bfin_write16(CAN1_MB08_ID1, val)
+#define bfin_read_CAN1_MB09_DATA0()		bfin_read16(CAN1_MB09_DATA0)
+#define bfin_write_CAN1_MB09_DATA0(val)		bfin_write16(CAN1_MB09_DATA0, val)
+#define bfin_read_CAN1_MB09_DATA1()		bfin_read16(CAN1_MB09_DATA1)
+#define bfin_write_CAN1_MB09_DATA1(val)		bfin_write16(CAN1_MB09_DATA1, val)
+#define bfin_read_CAN1_MB09_DATA2()		bfin_read16(CAN1_MB09_DATA2)
+#define bfin_write_CAN1_MB09_DATA2(val)		bfin_write16(CAN1_MB09_DATA2, val)
+#define bfin_read_CAN1_MB09_DATA3()		bfin_read16(CAN1_MB09_DATA3)
+#define bfin_write_CAN1_MB09_DATA3(val)		bfin_write16(CAN1_MB09_DATA3, val)
+#define bfin_read_CAN1_MB09_LENGTH()		bfin_read16(CAN1_MB09_LENGTH)
+#define bfin_write_CAN1_MB09_LENGTH(val)	bfin_write16(CAN1_MB09_LENGTH, val)
+#define bfin_read_CAN1_MB09_TIMESTAMP()		bfin_read16(CAN1_MB09_TIMESTAMP)
+#define bfin_write_CAN1_MB09_TIMESTAMP(val)	bfin_write16(CAN1_MB09_TIMESTAMP, val)
+#define bfin_read_CAN1_MB09_ID0()		bfin_read16(CAN1_MB09_ID0)
+#define bfin_write_CAN1_MB09_ID0(val)		bfin_write16(CAN1_MB09_ID0, val)
+#define bfin_read_CAN1_MB09_ID1()		bfin_read16(CAN1_MB09_ID1)
+#define bfin_write_CAN1_MB09_ID1(val)		bfin_write16(CAN1_MB09_ID1, val)
+#define bfin_read_CAN1_MB10_DATA0()		bfin_read16(CAN1_MB10_DATA0)
+#define bfin_write_CAN1_MB10_DATA0(val)		bfin_write16(CAN1_MB10_DATA0, val)
+#define bfin_read_CAN1_MB10_DATA1()		bfin_read16(CAN1_MB10_DATA1)
+#define bfin_write_CAN1_MB10_DATA1(val)		bfin_write16(CAN1_MB10_DATA1, val)
+#define bfin_read_CAN1_MB10_DATA2()		bfin_read16(CAN1_MB10_DATA2)
+#define bfin_write_CAN1_MB10_DATA2(val)		bfin_write16(CAN1_MB10_DATA2, val)
+#define bfin_read_CAN1_MB10_DATA3()		bfin_read16(CAN1_MB10_DATA3)
+#define bfin_write_CAN1_MB10_DATA3(val)		bfin_write16(CAN1_MB10_DATA3, val)
+#define bfin_read_CAN1_MB10_LENGTH()		bfin_read16(CAN1_MB10_LENGTH)
+#define bfin_write_CAN1_MB10_LENGTH(val)	bfin_write16(CAN1_MB10_LENGTH, val)
+#define bfin_read_CAN1_MB10_TIMESTAMP()		bfin_read16(CAN1_MB10_TIMESTAMP)
+#define bfin_write_CAN1_MB10_TIMESTAMP(val)	bfin_write16(CAN1_MB10_TIMESTAMP, val)
+#define bfin_read_CAN1_MB10_ID0()		bfin_read16(CAN1_MB10_ID0)
+#define bfin_write_CAN1_MB10_ID0(val)		bfin_write16(CAN1_MB10_ID0, val)
+#define bfin_read_CAN1_MB10_ID1()		bfin_read16(CAN1_MB10_ID1)
+#define bfin_write_CAN1_MB10_ID1(val)		bfin_write16(CAN1_MB10_ID1, val)
+#define bfin_read_CAN1_MB11_DATA0()		bfin_read16(CAN1_MB11_DATA0)
+#define bfin_write_CAN1_MB11_DATA0(val)		bfin_write16(CAN1_MB11_DATA0, val)
+#define bfin_read_CAN1_MB11_DATA1()		bfin_read16(CAN1_MB11_DATA1)
+#define bfin_write_CAN1_MB11_DATA1(val)		bfin_write16(CAN1_MB11_DATA1, val)
+#define bfin_read_CAN1_MB11_DATA2()		bfin_read16(CAN1_MB11_DATA2)
+#define bfin_write_CAN1_MB11_DATA2(val)		bfin_write16(CAN1_MB11_DATA2, val)
+#define bfin_read_CAN1_MB11_DATA3()		bfin_read16(CAN1_MB11_DATA3)
+#define bfin_write_CAN1_MB11_DATA3(val)		bfin_write16(CAN1_MB11_DATA3, val)
+#define bfin_read_CAN1_MB11_LENGTH()		bfin_read16(CAN1_MB11_LENGTH)
+#define bfin_write_CAN1_MB11_LENGTH(val)	bfin_write16(CAN1_MB11_LENGTH, val)
+#define bfin_read_CAN1_MB11_TIMESTAMP()		bfin_read16(CAN1_MB11_TIMESTAMP)
+#define bfin_write_CAN1_MB11_TIMESTAMP(val)	bfin_write16(CAN1_MB11_TIMESTAMP, val)
+#define bfin_read_CAN1_MB11_ID0()		bfin_read16(CAN1_MB11_ID0)
+#define bfin_write_CAN1_MB11_ID0(val)		bfin_write16(CAN1_MB11_ID0, val)
+#define bfin_read_CAN1_MB11_ID1()		bfin_read16(CAN1_MB11_ID1)
+#define bfin_write_CAN1_MB11_ID1(val)		bfin_write16(CAN1_MB11_ID1, val)
+#define bfin_read_CAN1_MB12_DATA0()		bfin_read16(CAN1_MB12_DATA0)
+#define bfin_write_CAN1_MB12_DATA0(val)		bfin_write16(CAN1_MB12_DATA0, val)
+#define bfin_read_CAN1_MB12_DATA1()		bfin_read16(CAN1_MB12_DATA1)
+#define bfin_write_CAN1_MB12_DATA1(val)		bfin_write16(CAN1_MB12_DATA1, val)
+#define bfin_read_CAN1_MB12_DATA2()		bfin_read16(CAN1_MB12_DATA2)
+#define bfin_write_CAN1_MB12_DATA2(val)		bfin_write16(CAN1_MB12_DATA2, val)
+#define bfin_read_CAN1_MB12_DATA3()		bfin_read16(CAN1_MB12_DATA3)
+#define bfin_write_CAN1_MB12_DATA3(val)		bfin_write16(CAN1_MB12_DATA3, val)
+#define bfin_read_CAN1_MB12_LENGTH()		bfin_read16(CAN1_MB12_LENGTH)
+#define bfin_write_CAN1_MB12_LENGTH(val)	bfin_write16(CAN1_MB12_LENGTH, val)
+#define bfin_read_CAN1_MB12_TIMESTAMP()		bfin_read16(CAN1_MB12_TIMESTAMP)
+#define bfin_write_CAN1_MB12_TIMESTAMP(val)	bfin_write16(CAN1_MB12_TIMESTAMP, val)
+#define bfin_read_CAN1_MB12_ID0()		bfin_read16(CAN1_MB12_ID0)
+#define bfin_write_CAN1_MB12_ID0(val)		bfin_write16(CAN1_MB12_ID0, val)
+#define bfin_read_CAN1_MB12_ID1()		bfin_read16(CAN1_MB12_ID1)
+#define bfin_write_CAN1_MB12_ID1(val)		bfin_write16(CAN1_MB12_ID1, val)
+#define bfin_read_CAN1_MB13_DATA0()		bfin_read16(CAN1_MB13_DATA0)
+#define bfin_write_CAN1_MB13_DATA0(val)		bfin_write16(CAN1_MB13_DATA0, val)
+#define bfin_read_CAN1_MB13_DATA1()		bfin_read16(CAN1_MB13_DATA1)
+#define bfin_write_CAN1_MB13_DATA1(val)		bfin_write16(CAN1_MB13_DATA1, val)
+#define bfin_read_CAN1_MB13_DATA2()		bfin_read16(CAN1_MB13_DATA2)
+#define bfin_write_CAN1_MB13_DATA2(val)		bfin_write16(CAN1_MB13_DATA2, val)
+#define bfin_read_CAN1_MB13_DATA3()		bfin_read16(CAN1_MB13_DATA3)
+#define bfin_write_CAN1_MB13_DATA3(val)		bfin_write16(CAN1_MB13_DATA3, val)
+#define bfin_read_CAN1_MB13_LENGTH()		bfin_read16(CAN1_MB13_LENGTH)
+#define bfin_write_CAN1_MB13_LENGTH(val)	bfin_write16(CAN1_MB13_LENGTH, val)
+#define bfin_read_CAN1_MB13_TIMESTAMP()		bfin_read16(CAN1_MB13_TIMESTAMP)
+#define bfin_write_CAN1_MB13_TIMESTAMP(val)	bfin_write16(CAN1_MB13_TIMESTAMP, val)
+#define bfin_read_CAN1_MB13_ID0()		bfin_read16(CAN1_MB13_ID0)
+#define bfin_write_CAN1_MB13_ID0(val)		bfin_write16(CAN1_MB13_ID0, val)
+#define bfin_read_CAN1_MB13_ID1()		bfin_read16(CAN1_MB13_ID1)
+#define bfin_write_CAN1_MB13_ID1(val)		bfin_write16(CAN1_MB13_ID1, val)
+#define bfin_read_CAN1_MB14_DATA0()		bfin_read16(CAN1_MB14_DATA0)
+#define bfin_write_CAN1_MB14_DATA0(val)		bfin_write16(CAN1_MB14_DATA0, val)
+#define bfin_read_CAN1_MB14_DATA1()		bfin_read16(CAN1_MB14_DATA1)
+#define bfin_write_CAN1_MB14_DATA1(val)		bfin_write16(CAN1_MB14_DATA1, val)
+#define bfin_read_CAN1_MB14_DATA2()		bfin_read16(CAN1_MB14_DATA2)
+#define bfin_write_CAN1_MB14_DATA2(val)		bfin_write16(CAN1_MB14_DATA2, val)
+#define bfin_read_CAN1_MB14_DATA3()		bfin_read16(CAN1_MB14_DATA3)
+#define bfin_write_CAN1_MB14_DATA3(val)		bfin_write16(CAN1_MB14_DATA3, val)
+#define bfin_read_CAN1_MB14_LENGTH()		bfin_read16(CAN1_MB14_LENGTH)
+#define bfin_write_CAN1_MB14_LENGTH(val)	bfin_write16(CAN1_MB14_LENGTH, val)
+#define bfin_read_CAN1_MB14_TIMESTAMP()		bfin_read16(CAN1_MB14_TIMESTAMP)
+#define bfin_write_CAN1_MB14_TIMESTAMP(val)	bfin_write16(CAN1_MB14_TIMESTAMP, val)
+#define bfin_read_CAN1_MB14_ID0()		bfin_read16(CAN1_MB14_ID0)
+#define bfin_write_CAN1_MB14_ID0(val)		bfin_write16(CAN1_MB14_ID0, val)
+#define bfin_read_CAN1_MB14_ID1()		bfin_read16(CAN1_MB14_ID1)
+#define bfin_write_CAN1_MB14_ID1(val)		bfin_write16(CAN1_MB14_ID1, val)
+#define bfin_read_CAN1_MB15_DATA0()		bfin_read16(CAN1_MB15_DATA0)
+#define bfin_write_CAN1_MB15_DATA0(val)		bfin_write16(CAN1_MB15_DATA0, val)
+#define bfin_read_CAN1_MB15_DATA1()		bfin_read16(CAN1_MB15_DATA1)
+#define bfin_write_CAN1_MB15_DATA1(val)		bfin_write16(CAN1_MB15_DATA1, val)
+#define bfin_read_CAN1_MB15_DATA2()		bfin_read16(CAN1_MB15_DATA2)
+#define bfin_write_CAN1_MB15_DATA2(val)		bfin_write16(CAN1_MB15_DATA2, val)
+#define bfin_read_CAN1_MB15_DATA3()		bfin_read16(CAN1_MB15_DATA3)
+#define bfin_write_CAN1_MB15_DATA3(val)		bfin_write16(CAN1_MB15_DATA3, val)
+#define bfin_read_CAN1_MB15_LENGTH()		bfin_read16(CAN1_MB15_LENGTH)
+#define bfin_write_CAN1_MB15_LENGTH(val)	bfin_write16(CAN1_MB15_LENGTH, val)
+#define bfin_read_CAN1_MB15_TIMESTAMP()		bfin_read16(CAN1_MB15_TIMESTAMP)
+#define bfin_write_CAN1_MB15_TIMESTAMP(val)	bfin_write16(CAN1_MB15_TIMESTAMP, val)
+#define bfin_read_CAN1_MB15_ID0()		bfin_read16(CAN1_MB15_ID0)
+#define bfin_write_CAN1_MB15_ID0(val)		bfin_write16(CAN1_MB15_ID0, val)
+#define bfin_read_CAN1_MB15_ID1()		bfin_read16(CAN1_MB15_ID1)
+#define bfin_write_CAN1_MB15_ID1(val)		bfin_write16(CAN1_MB15_ID1, val)
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define bfin_read_CAN1_MB16_DATA0()		bfin_read16(CAN1_MB16_DATA0)
+#define bfin_write_CAN1_MB16_DATA0(val)		bfin_write16(CAN1_MB16_DATA0, val)
+#define bfin_read_CAN1_MB16_DATA1()		bfin_read16(CAN1_MB16_DATA1)
+#define bfin_write_CAN1_MB16_DATA1(val)		bfin_write16(CAN1_MB16_DATA1, val)
+#define bfin_read_CAN1_MB16_DATA2()		bfin_read16(CAN1_MB16_DATA2)
+#define bfin_write_CAN1_MB16_DATA2(val)		bfin_write16(CAN1_MB16_DATA2, val)
+#define bfin_read_CAN1_MB16_DATA3()		bfin_read16(CAN1_MB16_DATA3)
+#define bfin_write_CAN1_MB16_DATA3(val)		bfin_write16(CAN1_MB16_DATA3, val)
+#define bfin_read_CAN1_MB16_LENGTH()		bfin_read16(CAN1_MB16_LENGTH)
+#define bfin_write_CAN1_MB16_LENGTH(val)	bfin_write16(CAN1_MB16_LENGTH, val)
+#define bfin_read_CAN1_MB16_TIMESTAMP()		bfin_read16(CAN1_MB16_TIMESTAMP)
+#define bfin_write_CAN1_MB16_TIMESTAMP(val)	bfin_write16(CAN1_MB16_TIMESTAMP, val)
+#define bfin_read_CAN1_MB16_ID0()		bfin_read16(CAN1_MB16_ID0)
+#define bfin_write_CAN1_MB16_ID0(val)		bfin_write16(CAN1_MB16_ID0, val)
+#define bfin_read_CAN1_MB16_ID1()		bfin_read16(CAN1_MB16_ID1)
+#define bfin_write_CAN1_MB16_ID1(val)		bfin_write16(CAN1_MB16_ID1, val)
+#define bfin_read_CAN1_MB17_DATA0()		bfin_read16(CAN1_MB17_DATA0)
+#define bfin_write_CAN1_MB17_DATA0(val)		bfin_write16(CAN1_MB17_DATA0, val)
+#define bfin_read_CAN1_MB17_DATA1()		bfin_read16(CAN1_MB17_DATA1)
+#define bfin_write_CAN1_MB17_DATA1(val)		bfin_write16(CAN1_MB17_DATA1, val)
+#define bfin_read_CAN1_MB17_DATA2()		bfin_read16(CAN1_MB17_DATA2)
+#define bfin_write_CAN1_MB17_DATA2(val)		bfin_write16(CAN1_MB17_DATA2, val)
+#define bfin_read_CAN1_MB17_DATA3()		bfin_read16(CAN1_MB17_DATA3)
+#define bfin_write_CAN1_MB17_DATA3(val)		bfin_write16(CAN1_MB17_DATA3, val)
+#define bfin_read_CAN1_MB17_LENGTH()		bfin_read16(CAN1_MB17_LENGTH)
+#define bfin_write_CAN1_MB17_LENGTH(val)	bfin_write16(CAN1_MB17_LENGTH, val)
+#define bfin_read_CAN1_MB17_TIMESTAMP()		bfin_read16(CAN1_MB17_TIMESTAMP)
+#define bfin_write_CAN1_MB17_TIMESTAMP(val)	bfin_write16(CAN1_MB17_TIMESTAMP, val)
+#define bfin_read_CAN1_MB17_ID0()		bfin_read16(CAN1_MB17_ID0)
+#define bfin_write_CAN1_MB17_ID0(val)		bfin_write16(CAN1_MB17_ID0, val)
+#define bfin_read_CAN1_MB17_ID1()		bfin_read16(CAN1_MB17_ID1)
+#define bfin_write_CAN1_MB17_ID1(val)		bfin_write16(CAN1_MB17_ID1, val)
+#define bfin_read_CAN1_MB18_DATA0()		bfin_read16(CAN1_MB18_DATA0)
+#define bfin_write_CAN1_MB18_DATA0(val)		bfin_write16(CAN1_MB18_DATA0, val)
+#define bfin_read_CAN1_MB18_DATA1()		bfin_read16(CAN1_MB18_DATA1)
+#define bfin_write_CAN1_MB18_DATA1(val)		bfin_write16(CAN1_MB18_DATA1, val)
+#define bfin_read_CAN1_MB18_DATA2()		bfin_read16(CAN1_MB18_DATA2)
+#define bfin_write_CAN1_MB18_DATA2(val)		bfin_write16(CAN1_MB18_DATA2, val)
+#define bfin_read_CAN1_MB18_DATA3()		bfin_read16(CAN1_MB18_DATA3)
+#define bfin_write_CAN1_MB18_DATA3(val)		bfin_write16(CAN1_MB18_DATA3, val)
+#define bfin_read_CAN1_MB18_LENGTH()		bfin_read16(CAN1_MB18_LENGTH)
+#define bfin_write_CAN1_MB18_LENGTH(val)	bfin_write16(CAN1_MB18_LENGTH, val)
+#define bfin_read_CAN1_MB18_TIMESTAMP()		bfin_read16(CAN1_MB18_TIMESTAMP)
+#define bfin_write_CAN1_MB18_TIMESTAMP(val)	bfin_write16(CAN1_MB18_TIMESTAMP, val)
+#define bfin_read_CAN1_MB18_ID0()		bfin_read16(CAN1_MB18_ID0)
+#define bfin_write_CAN1_MB18_ID0(val)		bfin_write16(CAN1_MB18_ID0, val)
+#define bfin_read_CAN1_MB18_ID1()		bfin_read16(CAN1_MB18_ID1)
+#define bfin_write_CAN1_MB18_ID1(val)		bfin_write16(CAN1_MB18_ID1, val)
+#define bfin_read_CAN1_MB19_DATA0()		bfin_read16(CAN1_MB19_DATA0)
+#define bfin_write_CAN1_MB19_DATA0(val)		bfin_write16(CAN1_MB19_DATA0, val)
+#define bfin_read_CAN1_MB19_DATA1()		bfin_read16(CAN1_MB19_DATA1)
+#define bfin_write_CAN1_MB19_DATA1(val)		bfin_write16(CAN1_MB19_DATA1, val)
+#define bfin_read_CAN1_MB19_DATA2()		bfin_read16(CAN1_MB19_DATA2)
+#define bfin_write_CAN1_MB19_DATA2(val)		bfin_write16(CAN1_MB19_DATA2, val)
+#define bfin_read_CAN1_MB19_DATA3()		bfin_read16(CAN1_MB19_DATA3)
+#define bfin_write_CAN1_MB19_DATA3(val)		bfin_write16(CAN1_MB19_DATA3, val)
+#define bfin_read_CAN1_MB19_LENGTH()		bfin_read16(CAN1_MB19_LENGTH)
+#define bfin_write_CAN1_MB19_LENGTH(val)	bfin_write16(CAN1_MB19_LENGTH, val)
+#define bfin_read_CAN1_MB19_TIMESTAMP()		bfin_read16(CAN1_MB19_TIMESTAMP)
+#define bfin_write_CAN1_MB19_TIMESTAMP(val)	bfin_write16(CAN1_MB19_TIMESTAMP, val)
+#define bfin_read_CAN1_MB19_ID0()		bfin_read16(CAN1_MB19_ID0)
+#define bfin_write_CAN1_MB19_ID0(val)		bfin_write16(CAN1_MB19_ID0, val)
+#define bfin_read_CAN1_MB19_ID1()		bfin_read16(CAN1_MB19_ID1)
+#define bfin_write_CAN1_MB19_ID1(val)		bfin_write16(CAN1_MB19_ID1, val)
+#define bfin_read_CAN1_MB20_DATA0()		bfin_read16(CAN1_MB20_DATA0)
+#define bfin_write_CAN1_MB20_DATA0(val)		bfin_write16(CAN1_MB20_DATA0, val)
+#define bfin_read_CAN1_MB20_DATA1()		bfin_read16(CAN1_MB20_DATA1)
+#define bfin_write_CAN1_MB20_DATA1(val)		bfin_write16(CAN1_MB20_DATA1, val)
+#define bfin_read_CAN1_MB20_DATA2()		bfin_read16(CAN1_MB20_DATA2)
+#define bfin_write_CAN1_MB20_DATA2(val)		bfin_write16(CAN1_MB20_DATA2, val)
+#define bfin_read_CAN1_MB20_DATA3()		bfin_read16(CAN1_MB20_DATA3)
+#define bfin_write_CAN1_MB20_DATA3(val)		bfin_write16(CAN1_MB20_DATA3, val)
+#define bfin_read_CAN1_MB20_LENGTH()		bfin_read16(CAN1_MB20_LENGTH)
+#define bfin_write_CAN1_MB20_LENGTH(val)	bfin_write16(CAN1_MB20_LENGTH, val)
+#define bfin_read_CAN1_MB20_TIMESTAMP()		bfin_read16(CAN1_MB20_TIMESTAMP)
+#define bfin_write_CAN1_MB20_TIMESTAMP(val)	bfin_write16(CAN1_MB20_TIMESTAMP, val)
+#define bfin_read_CAN1_MB20_ID0()		bfin_read16(CAN1_MB20_ID0)
+#define bfin_write_CAN1_MB20_ID0(val)		bfin_write16(CAN1_MB20_ID0, val)
+#define bfin_read_CAN1_MB20_ID1()		bfin_read16(CAN1_MB20_ID1)
+#define bfin_write_CAN1_MB20_ID1(val)		bfin_write16(CAN1_MB20_ID1, val)
+#define bfin_read_CAN1_MB21_DATA0()		bfin_read16(CAN1_MB21_DATA0)
+#define bfin_write_CAN1_MB21_DATA0(val)		bfin_write16(CAN1_MB21_DATA0, val)
+#define bfin_read_CAN1_MB21_DATA1()		bfin_read16(CAN1_MB21_DATA1)
+#define bfin_write_CAN1_MB21_DATA1(val)		bfin_write16(CAN1_MB21_DATA1, val)
+#define bfin_read_CAN1_MB21_DATA2()		bfin_read16(CAN1_MB21_DATA2)
+#define bfin_write_CAN1_MB21_DATA2(val)		bfin_write16(CAN1_MB21_DATA2, val)
+#define bfin_read_CAN1_MB21_DATA3()		bfin_read16(CAN1_MB21_DATA3)
+#define bfin_write_CAN1_MB21_DATA3(val)		bfin_write16(CAN1_MB21_DATA3, val)
+#define bfin_read_CAN1_MB21_LENGTH()		bfin_read16(CAN1_MB21_LENGTH)
+#define bfin_write_CAN1_MB21_LENGTH(val)	bfin_write16(CAN1_MB21_LENGTH, val)
+#define bfin_read_CAN1_MB21_TIMESTAMP()		bfin_read16(CAN1_MB21_TIMESTAMP)
+#define bfin_write_CAN1_MB21_TIMESTAMP(val)	bfin_write16(CAN1_MB21_TIMESTAMP, val)
+#define bfin_read_CAN1_MB21_ID0()		bfin_read16(CAN1_MB21_ID0)
+#define bfin_write_CAN1_MB21_ID0(val)		bfin_write16(CAN1_MB21_ID0, val)
+#define bfin_read_CAN1_MB21_ID1()		bfin_read16(CAN1_MB21_ID1)
+#define bfin_write_CAN1_MB21_ID1(val)		bfin_write16(CAN1_MB21_ID1, val)
+#define bfin_read_CAN1_MB22_DATA0()		bfin_read16(CAN1_MB22_DATA0)
+#define bfin_write_CAN1_MB22_DATA0(val)		bfin_write16(CAN1_MB22_DATA0, val)
+#define bfin_read_CAN1_MB22_DATA1()		bfin_read16(CAN1_MB22_DATA1)
+#define bfin_write_CAN1_MB22_DATA1(val)		bfin_write16(CAN1_MB22_DATA1, val)
+#define bfin_read_CAN1_MB22_DATA2()		bfin_read16(CAN1_MB22_DATA2)
+#define bfin_write_CAN1_MB22_DATA2(val)		bfin_write16(CAN1_MB22_DATA2, val)
+#define bfin_read_CAN1_MB22_DATA3()		bfin_read16(CAN1_MB22_DATA3)
+#define bfin_write_CAN1_MB22_DATA3(val)		bfin_write16(CAN1_MB22_DATA3, val)
+#define bfin_read_CAN1_MB22_LENGTH()		bfin_read16(CAN1_MB22_LENGTH)
+#define bfin_write_CAN1_MB22_LENGTH(val)	bfin_write16(CAN1_MB22_LENGTH, val)
+#define bfin_read_CAN1_MB22_TIMESTAMP()		bfin_read16(CAN1_MB22_TIMESTAMP)
+#define bfin_write_CAN1_MB22_TIMESTAMP(val)	bfin_write16(CAN1_MB22_TIMESTAMP, val)
+#define bfin_read_CAN1_MB22_ID0()		bfin_read16(CAN1_MB22_ID0)
+#define bfin_write_CAN1_MB22_ID0(val)		bfin_write16(CAN1_MB22_ID0, val)
+#define bfin_read_CAN1_MB22_ID1()		bfin_read16(CAN1_MB22_ID1)
+#define bfin_write_CAN1_MB22_ID1(val)		bfin_write16(CAN1_MB22_ID1, val)
+#define bfin_read_CAN1_MB23_DATA0()		bfin_read16(CAN1_MB23_DATA0)
+#define bfin_write_CAN1_MB23_DATA0(val)		bfin_write16(CAN1_MB23_DATA0, val)
+#define bfin_read_CAN1_MB23_DATA1()		bfin_read16(CAN1_MB23_DATA1)
+#define bfin_write_CAN1_MB23_DATA1(val)		bfin_write16(CAN1_MB23_DATA1, val)
+#define bfin_read_CAN1_MB23_DATA2()		bfin_read16(CAN1_MB23_DATA2)
+#define bfin_write_CAN1_MB23_DATA2(val)		bfin_write16(CAN1_MB23_DATA2, val)
+#define bfin_read_CAN1_MB23_DATA3()		bfin_read16(CAN1_MB23_DATA3)
+#define bfin_write_CAN1_MB23_DATA3(val)		bfin_write16(CAN1_MB23_DATA3, val)
+#define bfin_read_CAN1_MB23_LENGTH()		bfin_read16(CAN1_MB23_LENGTH)
+#define bfin_write_CAN1_MB23_LENGTH(val)	bfin_write16(CAN1_MB23_LENGTH, val)
+#define bfin_read_CAN1_MB23_TIMESTAMP()		bfin_read16(CAN1_MB23_TIMESTAMP)
+#define bfin_write_CAN1_MB23_TIMESTAMP(val)	bfin_write16(CAN1_MB23_TIMESTAMP, val)
+#define bfin_read_CAN1_MB23_ID0()		bfin_read16(CAN1_MB23_ID0)
+#define bfin_write_CAN1_MB23_ID0(val)		bfin_write16(CAN1_MB23_ID0, val)
+#define bfin_read_CAN1_MB23_ID1()		bfin_read16(CAN1_MB23_ID1)
+#define bfin_write_CAN1_MB23_ID1(val)		bfin_write16(CAN1_MB23_ID1, val)
+#define bfin_read_CAN1_MB24_DATA0()		bfin_read16(CAN1_MB24_DATA0)
+#define bfin_write_CAN1_MB24_DATA0(val)		bfin_write16(CAN1_MB24_DATA0, val)
+#define bfin_read_CAN1_MB24_DATA1()		bfin_read16(CAN1_MB24_DATA1)
+#define bfin_write_CAN1_MB24_DATA1(val)		bfin_write16(CAN1_MB24_DATA1, val)
+#define bfin_read_CAN1_MB24_DATA2()		bfin_read16(CAN1_MB24_DATA2)
+#define bfin_write_CAN1_MB24_DATA2(val)		bfin_write16(CAN1_MB24_DATA2, val)
+#define bfin_read_CAN1_MB24_DATA3()		bfin_read16(CAN1_MB24_DATA3)
+#define bfin_write_CAN1_MB24_DATA3(val)		bfin_write16(CAN1_MB24_DATA3, val)
+#define bfin_read_CAN1_MB24_LENGTH()		bfin_read16(CAN1_MB24_LENGTH)
+#define bfin_write_CAN1_MB24_LENGTH(val)	bfin_write16(CAN1_MB24_LENGTH, val)
+#define bfin_read_CAN1_MB24_TIMESTAMP()		bfin_read16(CAN1_MB24_TIMESTAMP)
+#define bfin_write_CAN1_MB24_TIMESTAMP(val)	bfin_write16(CAN1_MB24_TIMESTAMP, val)
+#define bfin_read_CAN1_MB24_ID0()		bfin_read16(CAN1_MB24_ID0)
+#define bfin_write_CAN1_MB24_ID0(val)		bfin_write16(CAN1_MB24_ID0, val)
+#define bfin_read_CAN1_MB24_ID1()		bfin_read16(CAN1_MB24_ID1)
+#define bfin_write_CAN1_MB24_ID1(val)		bfin_write16(CAN1_MB24_ID1, val)
+#define bfin_read_CAN1_MB25_DATA0()		bfin_read16(CAN1_MB25_DATA0)
+#define bfin_write_CAN1_MB25_DATA0(val)		bfin_write16(CAN1_MB25_DATA0, val)
+#define bfin_read_CAN1_MB25_DATA1()		bfin_read16(CAN1_MB25_DATA1)
+#define bfin_write_CAN1_MB25_DATA1(val)		bfin_write16(CAN1_MB25_DATA1, val)
+#define bfin_read_CAN1_MB25_DATA2()		bfin_read16(CAN1_MB25_DATA2)
+#define bfin_write_CAN1_MB25_DATA2(val)		bfin_write16(CAN1_MB25_DATA2, val)
+#define bfin_read_CAN1_MB25_DATA3()		bfin_read16(CAN1_MB25_DATA3)
+#define bfin_write_CAN1_MB25_DATA3(val)		bfin_write16(CAN1_MB25_DATA3, val)
+#define bfin_read_CAN1_MB25_LENGTH()		bfin_read16(CAN1_MB25_LENGTH)
+#define bfin_write_CAN1_MB25_LENGTH(val)	bfin_write16(CAN1_MB25_LENGTH, val)
+#define bfin_read_CAN1_MB25_TIMESTAMP()		bfin_read16(CAN1_MB25_TIMESTAMP)
+#define bfin_write_CAN1_MB25_TIMESTAMP(val)	bfin_write16(CAN1_MB25_TIMESTAMP, val)
+#define bfin_read_CAN1_MB25_ID0()		bfin_read16(CAN1_MB25_ID0)
+#define bfin_write_CAN1_MB25_ID0(val)		bfin_write16(CAN1_MB25_ID0, val)
+#define bfin_read_CAN1_MB25_ID1()		bfin_read16(CAN1_MB25_ID1)
+#define bfin_write_CAN1_MB25_ID1(val)		bfin_write16(CAN1_MB25_ID1, val)
+#define bfin_read_CAN1_MB26_DATA0()		bfin_read16(CAN1_MB26_DATA0)
+#define bfin_write_CAN1_MB26_DATA0(val)		bfin_write16(CAN1_MB26_DATA0, val)
+#define bfin_read_CAN1_MB26_DATA1()		bfin_read16(CAN1_MB26_DATA1)
+#define bfin_write_CAN1_MB26_DATA1(val)		bfin_write16(CAN1_MB26_DATA1, val)
+#define bfin_read_CAN1_MB26_DATA2()		bfin_read16(CAN1_MB26_DATA2)
+#define bfin_write_CAN1_MB26_DATA2(val)		bfin_write16(CAN1_MB26_DATA2, val)
+#define bfin_read_CAN1_MB26_DATA3()		bfin_read16(CAN1_MB26_DATA3)
+#define bfin_write_CAN1_MB26_DATA3(val)		bfin_write16(CAN1_MB26_DATA3, val)
+#define bfin_read_CAN1_MB26_LENGTH()		bfin_read16(CAN1_MB26_LENGTH)
+#define bfin_write_CAN1_MB26_LENGTH(val)	bfin_write16(CAN1_MB26_LENGTH, val)
+#define bfin_read_CAN1_MB26_TIMESTAMP()		bfin_read16(CAN1_MB26_TIMESTAMP)
+#define bfin_write_CAN1_MB26_TIMESTAMP(val)	bfin_write16(CAN1_MB26_TIMESTAMP, val)
+#define bfin_read_CAN1_MB26_ID0()		bfin_read16(CAN1_MB26_ID0)
+#define bfin_write_CAN1_MB26_ID0(val)		bfin_write16(CAN1_MB26_ID0, val)
+#define bfin_read_CAN1_MB26_ID1()		bfin_read16(CAN1_MB26_ID1)
+#define bfin_write_CAN1_MB26_ID1(val)		bfin_write16(CAN1_MB26_ID1, val)
+#define bfin_read_CAN1_MB27_DATA0()		bfin_read16(CAN1_MB27_DATA0)
+#define bfin_write_CAN1_MB27_DATA0(val)		bfin_write16(CAN1_MB27_DATA0, val)
+#define bfin_read_CAN1_MB27_DATA1()		bfin_read16(CAN1_MB27_DATA1)
+#define bfin_write_CAN1_MB27_DATA1(val)		bfin_write16(CAN1_MB27_DATA1, val)
+#define bfin_read_CAN1_MB27_DATA2()		bfin_read16(CAN1_MB27_DATA2)
+#define bfin_write_CAN1_MB27_DATA2(val)		bfin_write16(CAN1_MB27_DATA2, val)
+#define bfin_read_CAN1_MB27_DATA3()		bfin_read16(CAN1_MB27_DATA3)
+#define bfin_write_CAN1_MB27_DATA3(val)		bfin_write16(CAN1_MB27_DATA3, val)
+#define bfin_read_CAN1_MB27_LENGTH()		bfin_read16(CAN1_MB27_LENGTH)
+#define bfin_write_CAN1_MB27_LENGTH(val)	bfin_write16(CAN1_MB27_LENGTH, val)
+#define bfin_read_CAN1_MB27_TIMESTAMP()		bfin_read16(CAN1_MB27_TIMESTAMP)
+#define bfin_write_CAN1_MB27_TIMESTAMP(val)	bfin_write16(CAN1_MB27_TIMESTAMP, val)
+#define bfin_read_CAN1_MB27_ID0()		bfin_read16(CAN1_MB27_ID0)
+#define bfin_write_CAN1_MB27_ID0(val)		bfin_write16(CAN1_MB27_ID0, val)
+#define bfin_read_CAN1_MB27_ID1()		bfin_read16(CAN1_MB27_ID1)
+#define bfin_write_CAN1_MB27_ID1(val)		bfin_write16(CAN1_MB27_ID1, val)
+#define bfin_read_CAN1_MB28_DATA0()		bfin_read16(CAN1_MB28_DATA0)
+#define bfin_write_CAN1_MB28_DATA0(val)		bfin_write16(CAN1_MB28_DATA0, val)
+#define bfin_read_CAN1_MB28_DATA1()		bfin_read16(CAN1_MB28_DATA1)
+#define bfin_write_CAN1_MB28_DATA1(val)		bfin_write16(CAN1_MB28_DATA1, val)
+#define bfin_read_CAN1_MB28_DATA2()		bfin_read16(CAN1_MB28_DATA2)
+#define bfin_write_CAN1_MB28_DATA2(val)		bfin_write16(CAN1_MB28_DATA2, val)
+#define bfin_read_CAN1_MB28_DATA3()		bfin_read16(CAN1_MB28_DATA3)
+#define bfin_write_CAN1_MB28_DATA3(val)		bfin_write16(CAN1_MB28_DATA3, val)
+#define bfin_read_CAN1_MB28_LENGTH()		bfin_read16(CAN1_MB28_LENGTH)
+#define bfin_write_CAN1_MB28_LENGTH(val)	bfin_write16(CAN1_MB28_LENGTH, val)
+#define bfin_read_CAN1_MB28_TIMESTAMP()		bfin_read16(CAN1_MB28_TIMESTAMP)
+#define bfin_write_CAN1_MB28_TIMESTAMP(val)	bfin_write16(CAN1_MB28_TIMESTAMP, val)
+#define bfin_read_CAN1_MB28_ID0()		bfin_read16(CAN1_MB28_ID0)
+#define bfin_write_CAN1_MB28_ID0(val)		bfin_write16(CAN1_MB28_ID0, val)
+#define bfin_read_CAN1_MB28_ID1()		bfin_read16(CAN1_MB28_ID1)
+#define bfin_write_CAN1_MB28_ID1(val)		bfin_write16(CAN1_MB28_ID1, val)
+#define bfin_read_CAN1_MB29_DATA0()		bfin_read16(CAN1_MB29_DATA0)
+#define bfin_write_CAN1_MB29_DATA0(val)		bfin_write16(CAN1_MB29_DATA0, val)
+#define bfin_read_CAN1_MB29_DATA1()		bfin_read16(CAN1_MB29_DATA1)
+#define bfin_write_CAN1_MB29_DATA1(val)		bfin_write16(CAN1_MB29_DATA1, val)
+#define bfin_read_CAN1_MB29_DATA2()		bfin_read16(CAN1_MB29_DATA2)
+#define bfin_write_CAN1_MB29_DATA2(val)		bfin_write16(CAN1_MB29_DATA2, val)
+#define bfin_read_CAN1_MB29_DATA3()		bfin_read16(CAN1_MB29_DATA3)
+#define bfin_write_CAN1_MB29_DATA3(val)		bfin_write16(CAN1_MB29_DATA3, val)
+#define bfin_read_CAN1_MB29_LENGTH()		bfin_read16(CAN1_MB29_LENGTH)
+#define bfin_write_CAN1_MB29_LENGTH(val)	bfin_write16(CAN1_MB29_LENGTH, val)
+#define bfin_read_CAN1_MB29_TIMESTAMP()		bfin_read16(CAN1_MB29_TIMESTAMP)
+#define bfin_write_CAN1_MB29_TIMESTAMP(val)	bfin_write16(CAN1_MB29_TIMESTAMP, val)
+#define bfin_read_CAN1_MB29_ID0()		bfin_read16(CAN1_MB29_ID0)
+#define bfin_write_CAN1_MB29_ID0(val)		bfin_write16(CAN1_MB29_ID0, val)
+#define bfin_read_CAN1_MB29_ID1()		bfin_read16(CAN1_MB29_ID1)
+#define bfin_write_CAN1_MB29_ID1(val)		bfin_write16(CAN1_MB29_ID1, val)
+#define bfin_read_CAN1_MB30_DATA0()		bfin_read16(CAN1_MB30_DATA0)
+#define bfin_write_CAN1_MB30_DATA0(val)		bfin_write16(CAN1_MB30_DATA0, val)
+#define bfin_read_CAN1_MB30_DATA1()		bfin_read16(CAN1_MB30_DATA1)
+#define bfin_write_CAN1_MB30_DATA1(val)		bfin_write16(CAN1_MB30_DATA1, val)
+#define bfin_read_CAN1_MB30_DATA2()		bfin_read16(CAN1_MB30_DATA2)
+#define bfin_write_CAN1_MB30_DATA2(val)		bfin_write16(CAN1_MB30_DATA2, val)
+#define bfin_read_CAN1_MB30_DATA3()		bfin_read16(CAN1_MB30_DATA3)
+#define bfin_write_CAN1_MB30_DATA3(val)		bfin_write16(CAN1_MB30_DATA3, val)
+#define bfin_read_CAN1_MB30_LENGTH()		bfin_read16(CAN1_MB30_LENGTH)
+#define bfin_write_CAN1_MB30_LENGTH(val)	bfin_write16(CAN1_MB30_LENGTH, val)
+#define bfin_read_CAN1_MB30_TIMESTAMP()		bfin_read16(CAN1_MB30_TIMESTAMP)
+#define bfin_write_CAN1_MB30_TIMESTAMP(val)	bfin_write16(CAN1_MB30_TIMESTAMP, val)
+#define bfin_read_CAN1_MB30_ID0()		bfin_read16(CAN1_MB30_ID0)
+#define bfin_write_CAN1_MB30_ID0(val)		bfin_write16(CAN1_MB30_ID0, val)
+#define bfin_read_CAN1_MB30_ID1()		bfin_read16(CAN1_MB30_ID1)
+#define bfin_write_CAN1_MB30_ID1(val)		bfin_write16(CAN1_MB30_ID1, val)
+#define bfin_read_CAN1_MB31_DATA0()		bfin_read16(CAN1_MB31_DATA0)
+#define bfin_write_CAN1_MB31_DATA0(val)		bfin_write16(CAN1_MB31_DATA0, val)
+#define bfin_read_CAN1_MB31_DATA1()		bfin_read16(CAN1_MB31_DATA1)
+#define bfin_write_CAN1_MB31_DATA1(val)		bfin_write16(CAN1_MB31_DATA1, val)
+#define bfin_read_CAN1_MB31_DATA2()		bfin_read16(CAN1_MB31_DATA2)
+#define bfin_write_CAN1_MB31_DATA2(val)		bfin_write16(CAN1_MB31_DATA2, val)
+#define bfin_read_CAN1_MB31_DATA3()		bfin_read16(CAN1_MB31_DATA3)
+#define bfin_write_CAN1_MB31_DATA3(val)		bfin_write16(CAN1_MB31_DATA3, val)
+#define bfin_read_CAN1_MB31_LENGTH()		bfin_read16(CAN1_MB31_LENGTH)
+#define bfin_write_CAN1_MB31_LENGTH(val)	bfin_write16(CAN1_MB31_LENGTH, val)
+#define bfin_read_CAN1_MB31_TIMESTAMP()		bfin_read16(CAN1_MB31_TIMESTAMP)
+#define bfin_write_CAN1_MB31_TIMESTAMP(val)	bfin_write16(CAN1_MB31_TIMESTAMP, val)
+#define bfin_read_CAN1_MB31_ID0()		bfin_read16(CAN1_MB31_ID0)
+#define bfin_write_CAN1_MB31_ID0(val)		bfin_write16(CAN1_MB31_ID0, val)
+#define bfin_read_CAN1_MB31_ID1()		bfin_read16(CAN1_MB31_ID1)
+#define bfin_write_CAN1_MB31_ID1(val)		bfin_write16(CAN1_MB31_ID1, val)
+
+/* ATAPI Registers */
+
+#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
+#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
+#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
+#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
+#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
+#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
+#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
+#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
+#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
+#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
+#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
+#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
+#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
+#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
+#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
+#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
+#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
+#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
+#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
+#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
+#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
+#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
+#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
+#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
+#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
+#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
+#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
+#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
+#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
+#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
+#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
+#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
+#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
+#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
+#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
+#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
+#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
+#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
+#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
+#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
+#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
+#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
+#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
+#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
+#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
+#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
+#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
+
+/* SDH Registers */
+
+#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
+#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
+#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
+#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
+#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
+#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
+#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
+#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
+#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
+#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
+#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
+#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
+#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
+#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
+#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
+#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
+#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
+#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
+#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
+#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
+#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
+#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
+#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
+#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
+#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
+#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
+#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
+#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
+#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
+#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
+#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
+#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
+#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
+#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
+#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
+#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
+#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
+#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
+#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
+#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
+#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
+#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
+#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
+#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
+#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
+#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
+#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
+#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
+#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
+#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
+#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
+#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
+#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
+#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
+#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
+#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
+#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
+#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
+#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
+#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
+#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
+#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL()	bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val)	bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val)	bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT()	bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val)	bfin_write16(HOST_TIMEOUT, val)
+
+/* USB Control Registers */
+
+#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
+#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
+#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
+#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
+#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
+#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
+#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
+#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
+#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
+#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
+#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
+#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
+#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
+#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
+#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
+#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
+#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
+#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
+#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
+#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
+#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
+#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
+#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
+#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
+#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
+#define bfin_write_USB_GLOBAL_CTL(val)	bfin_write16(USB_GLOBAL_CTL, val)
+
+/* USB Packet Control Registers */
+
+#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
+#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
+#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
+#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
+#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
+#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
+#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
+#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
+#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
+#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
+#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
+#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
+#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
+#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
+#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
+#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
+#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
+#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
+#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
+#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
+#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
+#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
+#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
+#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
+#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
+#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
+
+/* USB Endbfin_read_()oint FIFO Registers */
+
+#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
+#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
+#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
+#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
+#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
+#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
+#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
+#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
+#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
+#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
+#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
+#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
+#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
+#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
+#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
+#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
+
+/* USB OTG Control Registers */
+
+#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
+#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
+#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
+#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
+#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
+#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
+
+/* USB Phy Control Registers */
+
+#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
+#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
+#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
+#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
+#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
+#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
+#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
+#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
+#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
+#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
+#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
+#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
+#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
+#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
+#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
+#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
+#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
+#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
+#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
+
+/* USB Endbfin_read_()oint 0 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
+#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
+#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
+#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
+#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
+#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
+#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
+#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
+#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
+#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
+#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
+#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
+#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
+#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
+#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
+#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
+#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 1 Control Registers */
+
+#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
+#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
+#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
+#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
+#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
+#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
+#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
+#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
+#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
+#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
+#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
+#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
+#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
+#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
+#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
+#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
+#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
+#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 2 Control Registers */
+
+#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
+#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
+#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
+#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
+#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
+#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
+#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
+#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
+#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
+#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
+#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
+#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
+#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
+#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
+#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
+#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
+#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
+#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 3 Control Registers */
+
+#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
+#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
+#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
+#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
+#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
+#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
+#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
+#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
+#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
+#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
+#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
+#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
+#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
+#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
+#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
+#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
+#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
+#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 4 Control Registers */
+
+#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
+#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
+#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
+#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
+#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
+#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
+#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
+#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
+#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
+#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
+#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
+#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
+#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
+#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
+#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
+#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
+#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
+#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 5 Control Registers */
+
+#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
+#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
+#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
+#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
+#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
+#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
+#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
+#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
+#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
+#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
+#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
+#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
+#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
+#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
+#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
+#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
+#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
+#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 6 Control Registers */
+
+#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
+#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
+#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
+#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
+#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
+#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
+#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
+#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
+#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
+#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
+#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
+#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
+#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
+#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
+#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
+#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
+#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
+#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
+
+/* USB Endbfin_read_()oint 7 Control Registers */
+
+#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
+#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
+#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
+#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
+#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
+#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
+#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
+#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
+#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
+#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
+#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
+#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
+#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
+#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
+#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
+#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
+#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
+#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
+#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
+#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
+#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
+#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
+
+/* USB Channel 0 Config Registers */
+
+#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
+#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
+#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
+#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
+#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
+#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
+#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
+#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
+#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
+#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
+
+/* USB Channel 1 Config Registers */
+
+#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
+#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
+#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
+#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
+#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
+#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
+#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
+#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
+#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
+#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
+
+/* USB Channel 2 Config Registers */
+
+#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
+#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
+#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
+#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
+#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
+#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
+#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
+#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
+#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
+#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
+
+/* USB Channel 3 Config Registers */
+
+#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
+#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
+#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
+#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
+#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
+#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
+#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
+#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
+#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
+#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
+
+/* USB Channel 4 Config Registers */
+
+#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
+#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
+#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
+#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
+#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
+#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
+#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
+#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
+#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
+#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
+
+/* USB Channel 5 Config Registers */
+
+#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
+#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
+#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
+#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
+#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
+#define bfin_write_USB_DMA5ADDRHIGH(val)		bfin_write16(USB_DMA5ADDRHIGH, val)
+#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
+#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
+#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
+#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
+
+/* USB Channel 6 Config Registers */
+
+#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
+#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
+#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
+#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
+#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
+#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
+#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
+#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
+#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
+#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
+
+/* USB Channel 7 Config Registers */
+
+#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
+#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
+#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
+#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
+#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
+#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
+#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
+#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
+#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
+#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
+
+/* Keybfin_read_()ad Registers */
+
+#define bfin_read_KPAD_CTL()		bfin_read16(KPAD_CTL)
+#define bfin_write_KPAD_CTL(val)	bfin_write16(KPAD_CTL, val)
+#define bfin_read_KPAD_PRESCALE()	bfin_read16(KPAD_PRESCALE)
+#define bfin_write_KPAD_PRESCALE(val)	bfin_write16(KPAD_PRESCALE, val)
+#define bfin_read_KPAD_MSEL()		bfin_read16(KPAD_MSEL)
+#define bfin_write_KPAD_MSEL(val)	bfin_write16(KPAD_MSEL, val)
+#define bfin_read_KPAD_ROWCOL()		bfin_read16(KPAD_ROWCOL)
+#define bfin_write_KPAD_ROWCOL(val)	bfin_write16(KPAD_ROWCOL, val)
+#define bfin_read_KPAD_STAT()		bfin_read16(KPAD_STAT)
+#define bfin_write_KPAD_STAT(val)	bfin_write16(KPAD_STAT, val)
+#define bfin_read_KPAD_SOFTEVAL()	bfin_read16(KPAD_SOFTEVAL)
+#define bfin_write_KPAD_SOFTEVAL(val)	bfin_write16(KPAD_SOFTEVAL, val)
+
+/* Pixel Combfin_read_()ositor (PIXC) Registers */
+
+#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
+#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
+#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
+#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
+#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
+#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
+#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
+#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
+#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
+#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
+#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
+#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
+#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
+#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
+#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
+#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
+#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
+#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
+#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
+#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
+#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
+#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
+#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
+#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
+#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
+#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
+#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
+#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
+#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
+#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
+#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
+#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
+#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
+#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
+#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
+#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
+#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
+#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
+
+/* Handshake MDMA 0 Registers */
+
+#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
+
+/* Handshake MDMA 1 Registers */
+
+#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
+
+#endif /* _CDEF_BF549_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
new file mode 100644
index 00000000000..57ac8cb9b1f
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -0,0 +1,2750 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF54X_H
+#define _CDEF_BF54X_H
+
+#include <asm/blackfin.h>
+
+#include "defBF54x_base.h"
+#include <asm/system.h>
+
+/* ************************************************************** */
+/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x    */
+/* ************************************************************** */
+
+/* PLL Registers */
+
+#define bfin_read_PLL_CTL()		bfin_read16(PLL_CTL)
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1, iwr2;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	iwr2 = bfin_read32(SIC_IWR2);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+	bfin_write32(SIC_IWR2, 0);
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	bfin_write32(SIC_IWR2, iwr2);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_DIV()		bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)		bfin_write16(PLL_DIV, val)
+#define bfin_read_VR_CTL()		bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1, iwr2;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	iwr2 = bfin_read32(SIC_IWR2);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+	bfin_write32(SIC_IWR2, 0);
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	bfin_write32(SIC_IWR2, iwr2);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_STAT()		bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)	bfin_write16(PLL_STAT, val)
+#define bfin_read_PLL_LOCKCNT()		bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)	bfin_write16(PLL_LOCKCNT, val)
+
+/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */
+
+#define bfin_read_CHIPID()		bfin_read32(CHIPID)
+#define bfin_write_CHIPID(val)		bfin_write32(CHIPID, val)
+
+/* System Reset and Interrubfin_read_()t Controller (0xFFC00100 - 0xFFC00104) */
+
+#define bfin_read_SWRST()		bfin_read16(SWRST)
+#define bfin_write_SWRST(val)		bfin_write16(SWRST, val)
+#define bfin_read_SYSCR()		bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)		bfin_write16(SYSCR, val)
+
+/* SIC Registers */
+
+#define bfin_read_SIC_IMASK0()		bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val)	bfin_write32(SIC_IMASK0, val)
+#define bfin_read_SIC_IMASK1()		bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val)	bfin_write32(SIC_IMASK1, val)
+#define bfin_read_SIC_IMASK2()		bfin_read32(SIC_IMASK2)
+#define bfin_write_SIC_IMASK2(val)	bfin_write32(SIC_IMASK2, val)
+#define bfin_read_SIC_IMASK(x)		bfin_read32(SIC_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val)	bfin_write32((SIC_IMASK0 + (x << 2)), val)
+
+#define bfin_read_SIC_ISR0()		bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val)	bfin_write32(SIC_ISR0, val)
+#define bfin_read_SIC_ISR1()		bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val)	bfin_write32(SIC_ISR1, val)
+#define bfin_read_SIC_ISR2()		bfin_read32(SIC_ISR2)
+#define bfin_write_SIC_ISR2(val)	bfin_write32(SIC_ISR2, val)
+#define bfin_read_SIC_ISR(x)		bfin_read32(SIC_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val)	bfin_write32((SIC_ISR0 + (x << 2)), val)
+
+#define bfin_read_SIC_IWR0()		bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val)	bfin_write32(SIC_IWR0, val)
+#define bfin_read_SIC_IWR1()		bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val)	bfin_write32(SIC_IWR1, val)
+#define bfin_read_SIC_IWR2()		bfin_read32(SIC_IWR2)
+#define bfin_write_SIC_IWR2(val)	bfin_write32(SIC_IWR2, val)
+#define bfin_read_SIC_IAR0()		bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)	bfin_write32(SIC_IAR0, val)
+#define bfin_read_SIC_IAR1()		bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)	bfin_write32(SIC_IAR1, val)
+#define bfin_read_SIC_IAR2()		bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)	bfin_write32(SIC_IAR2, val)
+#define bfin_read_SIC_IAR3()		bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)	bfin_write32(SIC_IAR3, val)
+#define bfin_read_SIC_IAR4()		bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val)	bfin_write32(SIC_IAR4, val)
+#define bfin_read_SIC_IAR5()		bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val)	bfin_write32(SIC_IAR5, val)
+#define bfin_read_SIC_IAR6()		bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val)	bfin_write32(SIC_IAR6, val)
+#define bfin_read_SIC_IAR7()		bfin_read32(SIC_IAR7)
+#define bfin_write_SIC_IAR7(val)	bfin_write32(SIC_IAR7, val)
+#define bfin_read_SIC_IAR8()		bfin_read32(SIC_IAR8)
+#define bfin_write_SIC_IAR8(val)	bfin_write32(SIC_IAR8, val)
+#define bfin_read_SIC_IAR9()		bfin_read32(SIC_IAR9)
+#define bfin_write_SIC_IAR9(val)	bfin_write32(SIC_IAR9, val)
+#define bfin_read_SIC_IAR10()		bfin_read32(SIC_IAR10)
+#define bfin_write_SIC_IAR10(val)	bfin_write32(SIC_IAR10, val)
+#define bfin_read_SIC_IAR11()		bfin_read32(SIC_IAR11)
+#define bfin_write_SIC_IAR11(val)	bfin_write32(SIC_IAR11, val)
+
+/* Watchdog Timer Registers */
+
+#define bfin_read_WDOG_CTL()		bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)	bfin_write16(WDOG_CTL, val)
+#define bfin_read_WDOG_CNT()		bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)	bfin_write32(WDOG_CNT, val)
+#define bfin_read_WDOG_STAT()		bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)	bfin_write32(WDOG_STAT, val)
+
+/* RTC Registers */
+
+#define bfin_read_RTC_STAT()		bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)	bfin_write32(RTC_STAT, val)
+#define bfin_read_RTC_ICTL()		bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)	bfin_write16(RTC_ICTL, val)
+#define bfin_read_RTC_ISTAT()		bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)	bfin_write16(RTC_ISTAT, val)
+#define bfin_read_RTC_SWCNT()		bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)	bfin_write16(RTC_SWCNT, val)
+#define bfin_read_RTC_ALARM()		bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)	bfin_write32(RTC_ALARM, val)
+#define bfin_read_RTC_PREN()		bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)	bfin_write16(RTC_PREN, val)
+
+/* UART0 Registers */
+
+#define bfin_read_UART0_DLL()		bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val)	bfin_write16(UART0_DLL, val)
+#define bfin_read_UART0_DLH()		bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val)	bfin_write16(UART0_DLH, val)
+#define bfin_read_UART0_GCTL()		bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val)	bfin_write16(UART0_GCTL, val)
+#define bfin_read_UART0_LCR()		bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val)	bfin_write16(UART0_LCR, val)
+#define bfin_read_UART0_MCR()		bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val)	bfin_write16(UART0_MCR, val)
+#define bfin_read_UART0_LSR()		bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val)	bfin_write16(UART0_LSR, val)
+#define bfin_read_UART0_MSR()		bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val)	bfin_write16(UART0_MSR, val)
+#define bfin_read_UART0_SCR()		bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val)	bfin_write16(UART0_SCR, val)
+#define bfin_read_UART0_IER_SET()	bfin_read16(UART0_IER_SET)
+#define bfin_write_UART0_IER_SET(val)	bfin_write16(UART0_IER_SET, val)
+#define bfin_read_UART0_IER_CLEAR()	bfin_read16(UART0_IER_CLEAR)
+#define bfin_write_UART0_IER_CLEAR(val)	bfin_write16(UART0_IER_CLEAR, val)
+#define bfin_read_UART0_THR()		bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val)	bfin_write16(UART0_THR, val)
+#define bfin_read_UART0_RBR()		bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val)	bfin_write16(UART0_RBR, val)
+
+/* SPI0 Registers */
+
+#define bfin_read_SPI0_CTL()		bfin_read16(SPI0_CTL)
+#define bfin_write_SPI0_CTL(val)	bfin_write16(SPI0_CTL, val)
+#define bfin_read_SPI0_FLG()		bfin_read16(SPI0_FLG)
+#define bfin_write_SPI0_FLG(val)	bfin_write16(SPI0_FLG, val)
+#define bfin_read_SPI0_STAT()		bfin_read16(SPI0_STAT)
+#define bfin_write_SPI0_STAT(val)	bfin_write16(SPI0_STAT, val)
+#define bfin_read_SPI0_TDBR()		bfin_read16(SPI0_TDBR)
+#define bfin_write_SPI0_TDBR(val)	bfin_write16(SPI0_TDBR, val)
+#define bfin_read_SPI0_RDBR()		bfin_read16(SPI0_RDBR)
+#define bfin_write_SPI0_RDBR(val)	bfin_write16(SPI0_RDBR, val)
+#define bfin_read_SPI0_BAUD()		bfin_read16(SPI0_BAUD)
+#define bfin_write_SPI0_BAUD(val)	bfin_write16(SPI0_BAUD, val)
+#define bfin_read_SPI0_SHADOW()		bfin_read16(SPI0_SHADOW)
+#define bfin_write_SPI0_SHADOW(val)	bfin_write16(SPI0_SHADOW, val)
+
+/* Timer Groubfin_read_() of 3 registers are not defined in the shared file because they are not available on the ADSP-BF542 processor */
+
+/* Two Wire Interface Registers (TWI0) */
+
+/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */
+
+/* SPORT1 Registers */
+
+#define bfin_read_SPORT1_TCR1()		bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)	bfin_write16(SPORT1_TCR1, val)
+#define bfin_read_SPORT1_TCR2()		bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)	bfin_write16(SPORT1_TCR2, val)
+#define bfin_read_SPORT1_TCLKDIV()	bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)	bfin_write16(SPORT1_TCLKDIV, val)
+#define bfin_read_SPORT1_TFSDIV()	bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)	bfin_write16(SPORT1_TFSDIV, val)
+#define bfin_read_SPORT1_TX()		bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)	bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX()		bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)	bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_RCR1()		bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)	bfin_write16(SPORT1_RCR1, val)
+#define bfin_read_SPORT1_RCR2()		bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)	bfin_write16(SPORT1_RCR2, val)
+#define bfin_read_SPORT1_RCLKDIV()	bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)	bfin_write16(SPORT1_RCLKDIV, val)
+#define bfin_read_SPORT1_RFSDIV()	bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)	bfin_write16(SPORT1_RFSDIV, val)
+#define bfin_read_SPORT1_STAT()		bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)	bfin_write16(SPORT1_STAT, val)
+#define bfin_read_SPORT1_CHNL()		bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)	bfin_write16(SPORT1_CHNL, val)
+#define bfin_read_SPORT1_MCMC1()	bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)	bfin_write16(SPORT1_MCMC1, val)
+#define bfin_read_SPORT1_MCMC2()	bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)	bfin_write16(SPORT1_MCMC2, val)
+#define bfin_read_SPORT1_MTCS0()	bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)	bfin_write32(SPORT1_MTCS0, val)
+#define bfin_read_SPORT1_MTCS1()	bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)	bfin_write32(SPORT1_MTCS1, val)
+#define bfin_read_SPORT1_MTCS2()	bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)	bfin_write32(SPORT1_MTCS2, val)
+#define bfin_read_SPORT1_MTCS3()	bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)	bfin_write32(SPORT1_MTCS3, val)
+#define bfin_read_SPORT1_MRCS0()	bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)	bfin_write32(SPORT1_MRCS0, val)
+#define bfin_read_SPORT1_MRCS1()	bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)	bfin_write32(SPORT1_MRCS1, val)
+#define bfin_read_SPORT1_MRCS2()	bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)	bfin_write32(SPORT1_MRCS2, val)
+#define bfin_read_SPORT1_MRCS3()	bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)	bfin_write32(SPORT1_MRCS3, val)
+
+/* Asynchronous Memory Control Registers */
+
+#define bfin_read_EBIU_AMGCTL()		bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)	bfin_write16(EBIU_AMGCTL, val)
+#define bfin_read_EBIU_AMBCTL0()	bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)	bfin_write32(EBIU_AMBCTL0, val)
+#define bfin_read_EBIU_AMBCTL1()	bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)	bfin_write32(EBIU_AMBCTL1, val)
+#define bfin_read_EBIU_MBSCTL()		bfin_read16(EBIU_MBSCTL)
+#define bfin_write_EBIU_MBSCTL(val)	bfin_write16(EBIU_MBSCTL, val)
+#define bfin_read_EBIU_ARBSTAT()	bfin_read32(EBIU_ARBSTAT)
+#define bfin_write_EBIU_ARBSTAT(val)	bfin_write32(EBIU_ARBSTAT, val)
+#define bfin_read_EBIU_MODE()		bfin_read32(EBIU_MODE)
+#define bfin_write_EBIU_MODE(val)	bfin_write32(EBIU_MODE, val)
+#define bfin_read_EBIU_FCTL()		bfin_read16(EBIU_FCTL)
+#define bfin_write_EBIU_FCTL(val)	bfin_write16(EBIU_FCTL, val)
+
+/* DDR Memory Control Registers */
+
+#define bfin_read_EBIU_DDRCTL0()	bfin_read32(EBIU_DDRCTL0)
+#define bfin_write_EBIU_DDRCTL0(val)	bfin_write32(EBIU_DDRCTL0, val)
+#define bfin_read_EBIU_DDRCTL1()	bfin_read32(EBIU_DDRCTL1)
+#define bfin_write_EBIU_DDRCTL1(val)	bfin_write32(EBIU_DDRCTL1, val)
+#define bfin_read_EBIU_DDRCTL2()	bfin_read32(EBIU_DDRCTL2)
+#define bfin_write_EBIU_DDRCTL2(val)	bfin_write32(EBIU_DDRCTL2, val)
+#define bfin_read_EBIU_DDRCTL3()	bfin_read32(EBIU_DDRCTL3)
+#define bfin_write_EBIU_DDRCTL3(val)	bfin_write32(EBIU_DDRCTL3, val)
+#define bfin_read_EBIU_DDRQUE()		bfin_read32(EBIU_DDRQUE)
+#define bfin_write_EBIU_DDRQUE(val)	bfin_write32(EBIU_DDRQUE, val)
+#define bfin_read_EBIU_ERRADD() 	bfin_read32(EBIU_ERRADD)
+#define bfin_write_EBIU_ERRADD(val) 	bfin_write32(EBIU_ERRADD, val)
+#define bfin_read_EBIU_ERRMST()		bfin_read16(EBIU_ERRMST)
+#define bfin_write_EBIU_ERRMST(val)	bfin_write16(EBIU_ERRMST, val)
+#define bfin_read_EBIU_RSTCTL()		bfin_read16(EBIU_RSTCTL)
+#define bfin_write_EBIU_RSTCTL(val)	bfin_write16(EBIU_RSTCTL, val)
+
+/* DDR BankRead and Write Count Registers */
+
+#define bfin_read_EBIU_DDRBRC0()	bfin_read32(EBIU_DDRBRC0)
+#define bfin_write_EBIU_DDRBRC0(val)	bfin_write32(EBIU_DDRBRC0, val)
+#define bfin_read_EBIU_DDRBRC1()	bfin_read32(EBIU_DDRBRC1)
+#define bfin_write_EBIU_DDRBRC1(val)	bfin_write32(EBIU_DDRBRC1, val)
+#define bfin_read_EBIU_DDRBRC2()	bfin_read32(EBIU_DDRBRC2)
+#define bfin_write_EBIU_DDRBRC2(val)	bfin_write32(EBIU_DDRBRC2, val)
+#define bfin_read_EBIU_DDRBRC3()	bfin_read32(EBIU_DDRBRC3)
+#define bfin_write_EBIU_DDRBRC3(val)	bfin_write32(EBIU_DDRBRC3, val)
+#define bfin_read_EBIU_DDRBRC4()	bfin_read32(EBIU_DDRBRC4)
+#define bfin_write_EBIU_DDRBRC4(val)	bfin_write32(EBIU_DDRBRC4, val)
+#define bfin_read_EBIU_DDRBRC5()	bfin_read32(EBIU_DDRBRC5)
+#define bfin_write_EBIU_DDRBRC5(val)	bfin_write32(EBIU_DDRBRC5, val)
+#define bfin_read_EBIU_DDRBRC6()	bfin_read32(EBIU_DDRBRC6)
+#define bfin_write_EBIU_DDRBRC6(val)	bfin_write32(EBIU_DDRBRC6, val)
+#define bfin_read_EBIU_DDRBRC7()	bfin_read32(EBIU_DDRBRC7)
+#define bfin_write_EBIU_DDRBRC7(val)	bfin_write32(EBIU_DDRBRC7, val)
+#define bfin_read_EBIU_DDRBWC0()	bfin_read32(EBIU_DDRBWC0)
+#define bfin_write_EBIU_DDRBWC0(val)	bfin_write32(EBIU_DDRBWC0, val)
+#define bfin_read_EBIU_DDRBWC1()	bfin_read32(EBIU_DDRBWC1)
+#define bfin_write_EBIU_DDRBWC1(val)	bfin_write32(EBIU_DDRBWC1, val)
+#define bfin_read_EBIU_DDRBWC2()	bfin_read32(EBIU_DDRBWC2)
+#define bfin_write_EBIU_DDRBWC2(val)	bfin_write32(EBIU_DDRBWC2, val)
+#define bfin_read_EBIU_DDRBWC3()	bfin_read32(EBIU_DDRBWC3)
+#define bfin_write_EBIU_DDRBWC3(val)	bfin_write32(EBIU_DDRBWC3, val)
+#define bfin_read_EBIU_DDRBWC4()	bfin_read32(EBIU_DDRBWC4)
+#define bfin_write_EBIU_DDRBWC4(val)	bfin_write32(EBIU_DDRBWC4, val)
+#define bfin_read_EBIU_DDRBWC5()	bfin_read32(EBIU_DDRBWC5)
+#define bfin_write_EBIU_DDRBWC5(val)	bfin_write32(EBIU_DDRBWC5, val)
+#define bfin_read_EBIU_DDRBWC6()	bfin_read32(EBIU_DDRBWC6)
+#define bfin_write_EBIU_DDRBWC6(val)	bfin_write32(EBIU_DDRBWC6, val)
+#define bfin_read_EBIU_DDRBWC7()	bfin_read32(EBIU_DDRBWC7)
+#define bfin_write_EBIU_DDRBWC7(val)	bfin_write32(EBIU_DDRBWC7, val)
+#define bfin_read_EBIU_DDRACCT()	bfin_read32(EBIU_DDRACCT)
+#define bfin_write_EBIU_DDRACCT(val)	bfin_write32(EBIU_DDRACCT, val)
+#define bfin_read_EBIU_DDRTACT()	bfin_read32(EBIU_DDRTACT)
+#define bfin_write_EBIU_DDRTACT(val)	bfin_write32(EBIU_DDRTACT, val)
+#define bfin_read_EBIU_DDRARCT()	bfin_read32(EBIU_DDRARCT)
+#define bfin_write_EBIU_DDRARCT(val)	bfin_write32(EBIU_DDRARCT, val)
+#define bfin_read_EBIU_DDRGC0()		bfin_read32(EBIU_DDRGC0)
+#define bfin_write_EBIU_DDRGC0(val)	bfin_write32(EBIU_DDRGC0, val)
+#define bfin_read_EBIU_DDRGC1()		bfin_read32(EBIU_DDRGC1)
+#define bfin_write_EBIU_DDRGC1(val)	bfin_write32(EBIU_DDRGC1, val)
+#define bfin_read_EBIU_DDRGC2()		bfin_read32(EBIU_DDRGC2)
+#define bfin_write_EBIU_DDRGC2(val)	bfin_write32(EBIU_DDRGC2, val)
+#define bfin_read_EBIU_DDRGC3()		bfin_read32(EBIU_DDRGC3)
+#define bfin_write_EBIU_DDRGC3(val)	bfin_write32(EBIU_DDRGC3, val)
+#define bfin_read_EBIU_DDRMCEN()	bfin_read32(EBIU_DDRMCEN)
+#define bfin_write_EBIU_DDRMCEN(val)	bfin_write32(EBIU_DDRMCEN, val)
+#define bfin_read_EBIU_DDRMCCL()	bfin_read32(EBIU_DDRMCCL)
+#define bfin_write_EBIU_DDRMCCL(val)	bfin_write32(EBIU_DDRMCCL, val)
+
+/* DMAC0 Registers */
+
+#define bfin_read_DMAC0_TCPER()		bfin_read16(DMAC0_TCPER)
+#define bfin_write_DMAC0_TCPER(val)	bfin_write16(DMAC0_TCPER, val)
+#define bfin_read_DMAC0_TCCNT()		bfin_read16(DMAC0_TCCNT)
+#define bfin_write_DMAC0_TCCNT(val)	bfin_write16(DMAC0_TCCNT, val)
+
+/* DMA Channel 0 Registers */
+
+#define bfin_read_DMA0_NEXT_DESC_PTR() 		bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val) 	bfin_write32(DMA0_NEXT_DESC_PTR, val)
+#define bfin_read_DMA0_START_ADDR() 		bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val) 	bfin_write32(DMA0_START_ADDR, val)
+#define bfin_read_DMA0_CONFIG()			bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)		bfin_write16(DMA0_CONFIG, val)
+#define bfin_read_DMA0_X_COUNT()		bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)		bfin_write16(DMA0_X_COUNT, val)
+#define bfin_read_DMA0_X_MODIFY()		bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val) 		bfin_write16(DMA0_X_MODIFY, val)
+#define bfin_read_DMA0_Y_COUNT()		bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)		bfin_write16(DMA0_Y_COUNT, val)
+#define bfin_read_DMA0_Y_MODIFY()		bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val) 		bfin_write16(DMA0_Y_MODIFY, val)
+#define bfin_read_DMA0_CURR_DESC_PTR() 		bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val) 	bfin_write32(DMA0_CURR_DESC_PTR, val)
+#define bfin_read_DMA0_CURR_ADDR() 		bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val) 		bfin_write32(DMA0_CURR_ADDR, val)
+#define bfin_read_DMA0_IRQ_STATUS()		bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)		bfin_write16(DMA0_IRQ_STATUS, val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()		bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)	bfin_write16(DMA0_PERIPHERAL_MAP, val)
+#define bfin_read_DMA0_CURR_X_COUNT()		bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)	bfin_write16(DMA0_CURR_X_COUNT, val)
+#define bfin_read_DMA0_CURR_Y_COUNT()		bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)	bfin_write16(DMA0_CURR_Y_COUNT, val)
+
+/* DMA Channel 1 Registers */
+
+#define bfin_read_DMA1_NEXT_DESC_PTR() 		bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val) 	bfin_write32(DMA1_NEXT_DESC_PTR, val)
+#define bfin_read_DMA1_START_ADDR() 		bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val) 	bfin_write32(DMA1_START_ADDR, val)
+#define bfin_read_DMA1_CONFIG()			bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)		bfin_write16(DMA1_CONFIG, val)
+#define bfin_read_DMA1_X_COUNT()		bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)		bfin_write16(DMA1_X_COUNT, val)
+#define bfin_read_DMA1_X_MODIFY()		bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val) 		bfin_write16(DMA1_X_MODIFY, val)
+#define bfin_read_DMA1_Y_COUNT()		bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)		bfin_write16(DMA1_Y_COUNT, val)
+#define bfin_read_DMA1_Y_MODIFY()		bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val) 		bfin_write16(DMA1_Y_MODIFY, val)
+#define bfin_read_DMA1_CURR_DESC_PTR() 		bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val) 	bfin_write32(DMA1_CURR_DESC_PTR, val)
+#define bfin_read_DMA1_CURR_ADDR() 		bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val) 		bfin_write32(DMA1_CURR_ADDR, val)
+#define bfin_read_DMA1_IRQ_STATUS()		bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)		bfin_write16(DMA1_IRQ_STATUS, val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()		bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)	bfin_write16(DMA1_PERIPHERAL_MAP, val)
+#define bfin_read_DMA1_CURR_X_COUNT()		bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)	bfin_write16(DMA1_CURR_X_COUNT, val)
+#define bfin_read_DMA1_CURR_Y_COUNT()		bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)	bfin_write16(DMA1_CURR_Y_COUNT, val)
+
+/* DMA Channel 2 Registers */
+
+#define bfin_read_DMA2_NEXT_DESC_PTR() 		bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val) 	bfin_write32(DMA2_NEXT_DESC_PTR, val)
+#define bfin_read_DMA2_START_ADDR() 		bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val) 	bfin_write32(DMA2_START_ADDR, val)
+#define bfin_read_DMA2_CONFIG()			bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)		bfin_write16(DMA2_CONFIG, val)
+#define bfin_read_DMA2_X_COUNT()		bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)		bfin_write16(DMA2_X_COUNT, val)
+#define bfin_read_DMA2_X_MODIFY()		bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val) 		bfin_write16(DMA2_X_MODIFY, val)
+#define bfin_read_DMA2_Y_COUNT()		bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)		bfin_write16(DMA2_Y_COUNT, val)
+#define bfin_read_DMA2_Y_MODIFY()		bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val) 		bfin_write16(DMA2_Y_MODIFY, val)
+#define bfin_read_DMA2_CURR_DESC_PTR() 		bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val) 	bfin_write32(DMA2_CURR_DESC_PTR, val)
+#define bfin_read_DMA2_CURR_ADDR() 		bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val) 		bfin_write32(DMA2_CURR_ADDR, val)
+#define bfin_read_DMA2_IRQ_STATUS()		bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)		bfin_write16(DMA2_IRQ_STATUS, val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()		bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)	bfin_write16(DMA2_PERIPHERAL_MAP, val)
+#define bfin_read_DMA2_CURR_X_COUNT()		bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)	bfin_write16(DMA2_CURR_X_COUNT, val)
+#define bfin_read_DMA2_CURR_Y_COUNT()		bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)	bfin_write16(DMA2_CURR_Y_COUNT, val)
+
+/* DMA Channel 3 Registers */
+
+#define bfin_read_DMA3_NEXT_DESC_PTR() 		bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val) 	bfin_write32(DMA3_NEXT_DESC_PTR, val)
+#define bfin_read_DMA3_START_ADDR() 		bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val) 	bfin_write32(DMA3_START_ADDR, val)
+#define bfin_read_DMA3_CONFIG()			bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)		bfin_write16(DMA3_CONFIG, val)
+#define bfin_read_DMA3_X_COUNT()		bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)		bfin_write16(DMA3_X_COUNT, val)
+#define bfin_read_DMA3_X_MODIFY()		bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val) 		bfin_write16(DMA3_X_MODIFY, val)
+#define bfin_read_DMA3_Y_COUNT()		bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)		bfin_write16(DMA3_Y_COUNT, val)
+#define bfin_read_DMA3_Y_MODIFY()		bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val) 		bfin_write16(DMA3_Y_MODIFY, val)
+#define bfin_read_DMA3_CURR_DESC_PTR() 		bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val) 	bfin_write32(DMA3_CURR_DESC_PTR, val)
+#define bfin_read_DMA3_CURR_ADDR() 		bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val) 		bfin_write32(DMA3_CURR_ADDR, val)
+#define bfin_read_DMA3_IRQ_STATUS()		bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)		bfin_write16(DMA3_IRQ_STATUS, val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()		bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)	bfin_write16(DMA3_PERIPHERAL_MAP, val)
+#define bfin_read_DMA3_CURR_X_COUNT()		bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)	bfin_write16(DMA3_CURR_X_COUNT, val)
+#define bfin_read_DMA3_CURR_Y_COUNT()		bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)	bfin_write16(DMA3_CURR_Y_COUNT, val)
+
+/* DMA Channel 4 Registers */
+
+#define bfin_read_DMA4_NEXT_DESC_PTR() 		bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val) 	bfin_write32(DMA4_NEXT_DESC_PTR, val)
+#define bfin_read_DMA4_START_ADDR() 		bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val) 	bfin_write32(DMA4_START_ADDR, val)
+#define bfin_read_DMA4_CONFIG()			bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)		bfin_write16(DMA4_CONFIG, val)
+#define bfin_read_DMA4_X_COUNT()		bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)		bfin_write16(DMA4_X_COUNT, val)
+#define bfin_read_DMA4_X_MODIFY()		bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val) 		bfin_write16(DMA4_X_MODIFY, val)
+#define bfin_read_DMA4_Y_COUNT()		bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)		bfin_write16(DMA4_Y_COUNT, val)
+#define bfin_read_DMA4_Y_MODIFY()		bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val) 		bfin_write16(DMA4_Y_MODIFY, val)
+#define bfin_read_DMA4_CURR_DESC_PTR() 		bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val) 	bfin_write32(DMA4_CURR_DESC_PTR, val)
+#define bfin_read_DMA4_CURR_ADDR() 		bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val) 		bfin_write32(DMA4_CURR_ADDR, val)
+#define bfin_read_DMA4_IRQ_STATUS()		bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)		bfin_write16(DMA4_IRQ_STATUS, val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()		bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)	bfin_write16(DMA4_PERIPHERAL_MAP, val)
+#define bfin_read_DMA4_CURR_X_COUNT()		bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)	bfin_write16(DMA4_CURR_X_COUNT, val)
+#define bfin_read_DMA4_CURR_Y_COUNT()		bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)	bfin_write16(DMA4_CURR_Y_COUNT, val)
+
+/* DMA Channel 5 Registers */
+
+#define bfin_read_DMA5_NEXT_DESC_PTR() 		bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val) 	bfin_write32(DMA5_NEXT_DESC_PTR, val)
+#define bfin_read_DMA5_START_ADDR() 		bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val) 	bfin_write32(DMA5_START_ADDR, val)
+#define bfin_read_DMA5_CONFIG()			bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)		bfin_write16(DMA5_CONFIG, val)
+#define bfin_read_DMA5_X_COUNT()		bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)		bfin_write16(DMA5_X_COUNT, val)
+#define bfin_read_DMA5_X_MODIFY()		bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val) 		bfin_write16(DMA5_X_MODIFY, val)
+#define bfin_read_DMA5_Y_COUNT()		bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)		bfin_write16(DMA5_Y_COUNT, val)
+#define bfin_read_DMA5_Y_MODIFY()		bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val) 		bfin_write16(DMA5_Y_MODIFY, val)
+#define bfin_read_DMA5_CURR_DESC_PTR() 		bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val) 	bfin_write32(DMA5_CURR_DESC_PTR, val)
+#define bfin_read_DMA5_CURR_ADDR() 		bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val) 		bfin_write32(DMA5_CURR_ADDR, val)
+#define bfin_read_DMA5_IRQ_STATUS()		bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)		bfin_write16(DMA5_IRQ_STATUS, val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()		bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)	bfin_write16(DMA5_PERIPHERAL_MAP, val)
+#define bfin_read_DMA5_CURR_X_COUNT()		bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)	bfin_write16(DMA5_CURR_X_COUNT, val)
+#define bfin_read_DMA5_CURR_Y_COUNT()		bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)	bfin_write16(DMA5_CURR_Y_COUNT, val)
+
+/* DMA Channel 6 Registers */
+
+#define bfin_read_DMA6_NEXT_DESC_PTR() 		bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val) 	bfin_write32(DMA6_NEXT_DESC_PTR, val)
+#define bfin_read_DMA6_START_ADDR() 		bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val) 	bfin_write32(DMA6_START_ADDR, val)
+#define bfin_read_DMA6_CONFIG()			bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)		bfin_write16(DMA6_CONFIG, val)
+#define bfin_read_DMA6_X_COUNT()		bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)		bfin_write16(DMA6_X_COUNT, val)
+#define bfin_read_DMA6_X_MODIFY()		bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val) 		bfin_write16(DMA6_X_MODIFY, val)
+#define bfin_read_DMA6_Y_COUNT()		bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)		bfin_write16(DMA6_Y_COUNT, val)
+#define bfin_read_DMA6_Y_MODIFY()		bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val) 		bfin_write16(DMA6_Y_MODIFY, val)
+#define bfin_read_DMA6_CURR_DESC_PTR() 		bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val) 	bfin_write32(DMA6_CURR_DESC_PTR, val)
+#define bfin_read_DMA6_CURR_ADDR() 		bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val) 		bfin_write32(DMA6_CURR_ADDR, val)
+#define bfin_read_DMA6_IRQ_STATUS()		bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)		bfin_write16(DMA6_IRQ_STATUS, val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()		bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)	bfin_write16(DMA6_PERIPHERAL_MAP, val)
+#define bfin_read_DMA6_CURR_X_COUNT()		bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)	bfin_write16(DMA6_CURR_X_COUNT, val)
+#define bfin_read_DMA6_CURR_Y_COUNT()		bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)	bfin_write16(DMA6_CURR_Y_COUNT, val)
+
+/* DMA Channel 7 Registers */
+
+#define bfin_read_DMA7_NEXT_DESC_PTR() 		bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val) 	bfin_write32(DMA7_NEXT_DESC_PTR, val)
+#define bfin_read_DMA7_START_ADDR() 		bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val) 	bfin_write32(DMA7_START_ADDR, val)
+#define bfin_read_DMA7_CONFIG()			bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)		bfin_write16(DMA7_CONFIG, val)
+#define bfin_read_DMA7_X_COUNT()		bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)		bfin_write16(DMA7_X_COUNT, val)
+#define bfin_read_DMA7_X_MODIFY()		bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val) 		bfin_write16(DMA7_X_MODIFY, val)
+#define bfin_read_DMA7_Y_COUNT()		bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)		bfin_write16(DMA7_Y_COUNT, val)
+#define bfin_read_DMA7_Y_MODIFY()		bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val) 		bfin_write16(DMA7_Y_MODIFY, val)
+#define bfin_read_DMA7_CURR_DESC_PTR() 		bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val) 	bfin_write32(DMA7_CURR_DESC_PTR, val)
+#define bfin_read_DMA7_CURR_ADDR() 		bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val) 		bfin_write32(DMA7_CURR_ADDR, val)
+#define bfin_read_DMA7_IRQ_STATUS()		bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)		bfin_write16(DMA7_IRQ_STATUS, val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()		bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)	bfin_write16(DMA7_PERIPHERAL_MAP, val)
+#define bfin_read_DMA7_CURR_X_COUNT()		bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)	bfin_write16(DMA7_CURR_X_COUNT, val)
+#define bfin_read_DMA7_CURR_Y_COUNT()		bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)	bfin_write16(DMA7_CURR_Y_COUNT, val)
+
+/* DMA Channel 8 Registers */
+
+#define bfin_read_DMA8_NEXT_DESC_PTR() 		bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val) 	bfin_write32(DMA8_NEXT_DESC_PTR, val)
+#define bfin_read_DMA8_START_ADDR() 		bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val) 	bfin_write32(DMA8_START_ADDR, val)
+#define bfin_read_DMA8_CONFIG()			bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val)		bfin_write16(DMA8_CONFIG, val)
+#define bfin_read_DMA8_X_COUNT()		bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val)		bfin_write16(DMA8_X_COUNT, val)
+#define bfin_read_DMA8_X_MODIFY()		bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val) 		bfin_write16(DMA8_X_MODIFY, val)
+#define bfin_read_DMA8_Y_COUNT()		bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val)		bfin_write16(DMA8_Y_COUNT, val)
+#define bfin_read_DMA8_Y_MODIFY()		bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val) 		bfin_write16(DMA8_Y_MODIFY, val)
+#define bfin_read_DMA8_CURR_DESC_PTR() 		bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val) 	bfin_write32(DMA8_CURR_DESC_PTR, val)
+#define bfin_read_DMA8_CURR_ADDR() 		bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val) 		bfin_write32(DMA8_CURR_ADDR, val)
+#define bfin_read_DMA8_IRQ_STATUS()		bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val)		bfin_write16(DMA8_IRQ_STATUS, val)
+#define bfin_read_DMA8_PERIPHERAL_MAP()		bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val)	bfin_write16(DMA8_PERIPHERAL_MAP, val)
+#define bfin_read_DMA8_CURR_X_COUNT()		bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val)	bfin_write16(DMA8_CURR_X_COUNT, val)
+#define bfin_read_DMA8_CURR_Y_COUNT()		bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val)	bfin_write16(DMA8_CURR_Y_COUNT, val)
+
+/* DMA Channel 9 Registers */
+
+#define bfin_read_DMA9_NEXT_DESC_PTR() 		bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val) 	bfin_write32(DMA9_NEXT_DESC_PTR, val)
+#define bfin_read_DMA9_START_ADDR() 		bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val) 	bfin_write32(DMA9_START_ADDR, val)
+#define bfin_read_DMA9_CONFIG()			bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val)		bfin_write16(DMA9_CONFIG, val)
+#define bfin_read_DMA9_X_COUNT()		bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val)		bfin_write16(DMA9_X_COUNT, val)
+#define bfin_read_DMA9_X_MODIFY()		bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val) 		bfin_write16(DMA9_X_MODIFY, val)
+#define bfin_read_DMA9_Y_COUNT()		bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val)		bfin_write16(DMA9_Y_COUNT, val)
+#define bfin_read_DMA9_Y_MODIFY()		bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val) 		bfin_write16(DMA9_Y_MODIFY, val)
+#define bfin_read_DMA9_CURR_DESC_PTR() 		bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val) 	bfin_write32(DMA9_CURR_DESC_PTR, val)
+#define bfin_read_DMA9_CURR_ADDR() 		bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val) 		bfin_write32(DMA9_CURR_ADDR, val)
+#define bfin_read_DMA9_IRQ_STATUS()		bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val)		bfin_write16(DMA9_IRQ_STATUS, val)
+#define bfin_read_DMA9_PERIPHERAL_MAP()		bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val)	bfin_write16(DMA9_PERIPHERAL_MAP, val)
+#define bfin_read_DMA9_CURR_X_COUNT()		bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val)	bfin_write16(DMA9_CURR_X_COUNT, val)
+#define bfin_read_DMA9_CURR_Y_COUNT()		bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val)	bfin_write16(DMA9_CURR_Y_COUNT, val)
+
+/* DMA Channel 10 Registers */
+
+#define bfin_read_DMA10_NEXT_DESC_PTR() 	bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val) 	bfin_write32(DMA10_NEXT_DESC_PTR, val)
+#define bfin_read_DMA10_START_ADDR() 		bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val) 	bfin_write32(DMA10_START_ADDR, val)
+#define bfin_read_DMA10_CONFIG()		bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val)		bfin_write16(DMA10_CONFIG, val)
+#define bfin_read_DMA10_X_COUNT()		bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val)		bfin_write16(DMA10_X_COUNT, val)
+#define bfin_read_DMA10_X_MODIFY()		bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val) 		bfin_write16(DMA10_X_MODIFY, val)
+#define bfin_read_DMA10_Y_COUNT()		bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val)		bfin_write16(DMA10_Y_COUNT, val)
+#define bfin_read_DMA10_Y_MODIFY()		bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val) 		bfin_write16(DMA10_Y_MODIFY, val)
+#define bfin_read_DMA10_CURR_DESC_PTR() 	bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val) 	bfin_write32(DMA10_CURR_DESC_PTR, val)
+#define bfin_read_DMA10_CURR_ADDR() 		bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val) 	bfin_write32(DMA10_CURR_ADDR, val)
+#define bfin_read_DMA10_IRQ_STATUS()		bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val)	bfin_write16(DMA10_IRQ_STATUS, val)
+#define bfin_read_DMA10_PERIPHERAL_MAP()	bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val)	bfin_write16(DMA10_PERIPHERAL_MAP, val)
+#define bfin_read_DMA10_CURR_X_COUNT()		bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val)	bfin_write16(DMA10_CURR_X_COUNT, val)
+#define bfin_read_DMA10_CURR_Y_COUNT()		bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val)	bfin_write16(DMA10_CURR_Y_COUNT, val)
+
+/* DMA Channel 11 Registers */
+
+#define bfin_read_DMA11_NEXT_DESC_PTR() 	bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val) 	bfin_write32(DMA11_NEXT_DESC_PTR, val)
+#define bfin_read_DMA11_START_ADDR() 		bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val) 	bfin_write32(DMA11_START_ADDR, val)
+#define bfin_read_DMA11_CONFIG()		bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val)		bfin_write16(DMA11_CONFIG, val)
+#define bfin_read_DMA11_X_COUNT()		bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val)		bfin_write16(DMA11_X_COUNT, val)
+#define bfin_read_DMA11_X_MODIFY()		bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val) 		bfin_write16(DMA11_X_MODIFY, val)
+#define bfin_read_DMA11_Y_COUNT()		bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val)		bfin_write16(DMA11_Y_COUNT, val)
+#define bfin_read_DMA11_Y_MODIFY()		bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val) 		bfin_write16(DMA11_Y_MODIFY, val)
+#define bfin_read_DMA11_CURR_DESC_PTR() 	bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val) 	bfin_write32(DMA11_CURR_DESC_PTR, val)
+#define bfin_read_DMA11_CURR_ADDR() 		bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val) 	bfin_write32(DMA11_CURR_ADDR, val)
+#define bfin_read_DMA11_IRQ_STATUS()		bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val)	bfin_write16(DMA11_IRQ_STATUS, val)
+#define bfin_read_DMA11_PERIPHERAL_MAP()	bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val)	bfin_write16(DMA11_PERIPHERAL_MAP, val)
+#define bfin_read_DMA11_CURR_X_COUNT()		bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val)	bfin_write16(DMA11_CURR_X_COUNT, val)
+#define bfin_read_DMA11_CURR_Y_COUNT()		bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val)	bfin_write16(DMA11_CURR_Y_COUNT, val)
+
+/* MDMA Stream 0 Registers */
+
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR() 	bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D0_START_ADDR() 		bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) 	bfin_write32(MDMA_D0_START_ADDR, val)
+#define bfin_read_MDMA_D0_CONFIG()		bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)		bfin_write16(MDMA_D0_CONFIG, val)
+#define bfin_read_MDMA_D0_X_COUNT()		bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)		bfin_write16(MDMA_D0_X_COUNT, val)
+#define bfin_read_MDMA_D0_X_MODIFY()		bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) 	bfin_write16(MDMA_D0_X_MODIFY, val)
+#define bfin_read_MDMA_D0_Y_COUNT()		bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)		bfin_write16(MDMA_D0_Y_COUNT, val)
+#define bfin_read_MDMA_D0_Y_MODIFY()		bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) 	bfin_write16(MDMA_D0_Y_MODIFY, val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR() 	bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D0_CURR_ADDR() 		bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) 	bfin_write32(MDMA_D0_CURR_ADDR, val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()		bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)	bfin_write16(MDMA_D0_IRQ_STATUS, val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()	bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D0_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()	bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val)	bfin_write16(MDMA_D0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()	bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val)	bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR() 	bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S0_START_ADDR() 		bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) 	bfin_write32(MDMA_S0_START_ADDR, val)
+#define bfin_read_MDMA_S0_CONFIG()		bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)		bfin_write16(MDMA_S0_CONFIG, val)
+#define bfin_read_MDMA_S0_X_COUNT()		bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)		bfin_write16(MDMA_S0_X_COUNT, val)
+#define bfin_read_MDMA_S0_X_MODIFY()		bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) 	bfin_write16(MDMA_S0_X_MODIFY, val)
+#define bfin_read_MDMA_S0_Y_COUNT()		bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)		bfin_write16(MDMA_S0_Y_COUNT, val)
+#define bfin_read_MDMA_S0_Y_MODIFY()		bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) 	bfin_write16(MDMA_S0_Y_MODIFY, val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR() 	bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S0_CURR_ADDR() 		bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) 	bfin_write32(MDMA_S0_CURR_ADDR, val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()		bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)	bfin_write16(MDMA_S0_IRQ_STATUS, val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()	bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S0_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()	bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val)	bfin_write16(MDMA_S0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()	bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val)	bfin_write16(MDMA_S0_CURR_Y_COUNT, val)
+
+/* MDMA Stream 1 Registers */
+
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR() 	bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D1_START_ADDR() 		bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) 	bfin_write32(MDMA_D1_START_ADDR, val)
+#define bfin_read_MDMA_D1_CONFIG()		bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)		bfin_write16(MDMA_D1_CONFIG, val)
+#define bfin_read_MDMA_D1_X_COUNT()		bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)		bfin_write16(MDMA_D1_X_COUNT, val)
+#define bfin_read_MDMA_D1_X_MODIFY()		bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val) 	bfin_write16(MDMA_D1_X_MODIFY, val)
+#define bfin_read_MDMA_D1_Y_COUNT()		bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)		bfin_write16(MDMA_D1_Y_COUNT, val)
+#define bfin_read_MDMA_D1_Y_MODIFY()		bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val) 	bfin_write16(MDMA_D1_Y_MODIFY, val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR() 	bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D1_CURR_ADDR() 		bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) 	bfin_write32(MDMA_D1_CURR_ADDR, val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()		bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)	bfin_write16(MDMA_D1_IRQ_STATUS, val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()	bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_D1_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()	bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val)	bfin_write16(MDMA_D1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()	bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val)	bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR() 	bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S1_START_ADDR() 		bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) 	bfin_write32(MDMA_S1_START_ADDR, val)
+#define bfin_read_MDMA_S1_CONFIG()		bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)		bfin_write16(MDMA_S1_CONFIG, val)
+#define bfin_read_MDMA_S1_X_COUNT()		bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)		bfin_write16(MDMA_S1_X_COUNT, val)
+#define bfin_read_MDMA_S1_X_MODIFY()		bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val) 	bfin_write16(MDMA_S1_X_MODIFY, val)
+#define bfin_read_MDMA_S1_Y_COUNT()		bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)		bfin_write16(MDMA_S1_Y_COUNT, val)
+#define bfin_read_MDMA_S1_Y_MODIFY()		bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val) 	bfin_write16(MDMA_S1_Y_MODIFY, val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR() 	bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S1_CURR_ADDR() 		bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) 	bfin_write32(MDMA_S1_CURR_ADDR, val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()		bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)	bfin_write16(MDMA_S1_IRQ_STATUS, val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()	bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val)	bfin_write16(MDMA_S1_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()	bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val)	bfin_write16(MDMA_S1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()	bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val)	bfin_write16(MDMA_S1_CURR_Y_COUNT, val)
+
+/* EPPI1 Registers */
+
+#define bfin_read_EPPI1_STATUS()		bfin_read16(EPPI1_STATUS)
+#define bfin_write_EPPI1_STATUS(val)		bfin_write16(EPPI1_STATUS, val)
+#define bfin_read_EPPI1_HCOUNT()		bfin_read16(EPPI1_HCOUNT)
+#define bfin_write_EPPI1_HCOUNT(val)		bfin_write16(EPPI1_HCOUNT, val)
+#define bfin_read_EPPI1_HDELAY()		bfin_read16(EPPI1_HDELAY)
+#define bfin_write_EPPI1_HDELAY(val)		bfin_write16(EPPI1_HDELAY, val)
+#define bfin_read_EPPI1_VCOUNT()		bfin_read16(EPPI1_VCOUNT)
+#define bfin_write_EPPI1_VCOUNT(val)		bfin_write16(EPPI1_VCOUNT, val)
+#define bfin_read_EPPI1_VDELAY()		bfin_read16(EPPI1_VDELAY)
+#define bfin_write_EPPI1_VDELAY(val)		bfin_write16(EPPI1_VDELAY, val)
+#define bfin_read_EPPI1_FRAME()			bfin_read16(EPPI1_FRAME)
+#define bfin_write_EPPI1_FRAME(val)		bfin_write16(EPPI1_FRAME, val)
+#define bfin_read_EPPI1_LINE()			bfin_read16(EPPI1_LINE)
+#define bfin_write_EPPI1_LINE(val)		bfin_write16(EPPI1_LINE, val)
+#define bfin_read_EPPI1_CLKDIV()		bfin_read16(EPPI1_CLKDIV)
+#define bfin_write_EPPI1_CLKDIV(val)		bfin_write16(EPPI1_CLKDIV, val)
+#define bfin_read_EPPI1_CONTROL()		bfin_read32(EPPI1_CONTROL)
+#define bfin_write_EPPI1_CONTROL(val)		bfin_write32(EPPI1_CONTROL, val)
+#define bfin_read_EPPI1_FS1W_HBL()		bfin_read32(EPPI1_FS1W_HBL)
+#define bfin_write_EPPI1_FS1W_HBL(val)		bfin_write32(EPPI1_FS1W_HBL, val)
+#define bfin_read_EPPI1_FS1P_AVPL()		bfin_read32(EPPI1_FS1P_AVPL)
+#define bfin_write_EPPI1_FS1P_AVPL(val)		bfin_write32(EPPI1_FS1P_AVPL, val)
+#define bfin_read_EPPI1_FS2W_LVB()		bfin_read32(EPPI1_FS2W_LVB)
+#define bfin_write_EPPI1_FS2W_LVB(val)		bfin_write32(EPPI1_FS2W_LVB, val)
+#define bfin_read_EPPI1_FS2P_LAVF()		bfin_read32(EPPI1_FS2P_LAVF)
+#define bfin_write_EPPI1_FS2P_LAVF(val)		bfin_write32(EPPI1_FS2P_LAVF, val)
+#define bfin_read_EPPI1_CLIP()			bfin_read32(EPPI1_CLIP)
+#define bfin_write_EPPI1_CLIP(val)		bfin_write32(EPPI1_CLIP, val)
+
+/* Port Interrubfin_read_()t 0 Registers (32-bit) */
+
+#define bfin_read_PINT0_MASK_SET()		bfin_read32(PINT0_MASK_SET)
+#define bfin_write_PINT0_MASK_SET(val)		bfin_write32(PINT0_MASK_SET, val)
+#define bfin_read_PINT0_MASK_CLEAR()		bfin_read32(PINT0_MASK_CLEAR)
+#define bfin_write_PINT0_MASK_CLEAR(val)	bfin_write32(PINT0_MASK_CLEAR, val)
+#define bfin_read_PINT0_REQUEST()		bfin_read32(PINT0_REQUEST)
+#define bfin_write_PINT0_REQUEST(val)		bfin_write32(PINT0_REQUEST, val)
+#define bfin_read_PINT0_ASSIGN()		bfin_read32(PINT0_ASSIGN)
+#define bfin_write_PINT0_ASSIGN(val)		bfin_write32(PINT0_ASSIGN, val)
+#define bfin_read_PINT0_EDGE_SET()		bfin_read32(PINT0_EDGE_SET)
+#define bfin_write_PINT0_EDGE_SET(val)		bfin_write32(PINT0_EDGE_SET, val)
+#define bfin_read_PINT0_EDGE_CLEAR()		bfin_read32(PINT0_EDGE_CLEAR)
+#define bfin_write_PINT0_EDGE_CLEAR(val)	bfin_write32(PINT0_EDGE_CLEAR, val)
+#define bfin_read_PINT0_INVERT_SET()		bfin_read32(PINT0_INVERT_SET)
+#define bfin_write_PINT0_INVERT_SET(val)	bfin_write32(PINT0_INVERT_SET, val)
+#define bfin_read_PINT0_INVERT_CLEAR()		bfin_read32(PINT0_INVERT_CLEAR)
+#define bfin_write_PINT0_INVERT_CLEAR(val)	bfin_write32(PINT0_INVERT_CLEAR, val)
+#define bfin_read_PINT0_PINSTATE()		bfin_read32(PINT0_PINSTATE)
+#define bfin_write_PINT0_PINSTATE(val)		bfin_write32(PINT0_PINSTATE, val)
+#define bfin_read_PINT0_LATCH()			bfin_read32(PINT0_LATCH)
+#define bfin_write_PINT0_LATCH(val)		bfin_write32(PINT0_LATCH, val)
+
+/* Port Interrubfin_read_()t 1 Registers (32-bit) */
+
+#define bfin_read_PINT1_MASK_SET()		bfin_read32(PINT1_MASK_SET)
+#define bfin_write_PINT1_MASK_SET(val)		bfin_write32(PINT1_MASK_SET, val)
+#define bfin_read_PINT1_MASK_CLEAR()		bfin_read32(PINT1_MASK_CLEAR)
+#define bfin_write_PINT1_MASK_CLEAR(val)	bfin_write32(PINT1_MASK_CLEAR, val)
+#define bfin_read_PINT1_REQUEST()		bfin_read32(PINT1_REQUEST)
+#define bfin_write_PINT1_REQUEST(val)		bfin_write32(PINT1_REQUEST, val)
+#define bfin_read_PINT1_ASSIGN()		bfin_read32(PINT1_ASSIGN)
+#define bfin_write_PINT1_ASSIGN(val)		bfin_write32(PINT1_ASSIGN, val)
+#define bfin_read_PINT1_EDGE_SET()		bfin_read32(PINT1_EDGE_SET)
+#define bfin_write_PINT1_EDGE_SET(val)		bfin_write32(PINT1_EDGE_SET, val)
+#define bfin_read_PINT1_EDGE_CLEAR()		bfin_read32(PINT1_EDGE_CLEAR)
+#define bfin_write_PINT1_EDGE_CLEAR(val)	bfin_write32(PINT1_EDGE_CLEAR, val)
+#define bfin_read_PINT1_INVERT_SET()		bfin_read32(PINT1_INVERT_SET)
+#define bfin_write_PINT1_INVERT_SET(val)	bfin_write32(PINT1_INVERT_SET, val)
+#define bfin_read_PINT1_INVERT_CLEAR()		bfin_read32(PINT1_INVERT_CLEAR)
+#define bfin_write_PINT1_INVERT_CLEAR(val)	bfin_write32(PINT1_INVERT_CLEAR, val)
+#define bfin_read_PINT1_PINSTATE()		bfin_read32(PINT1_PINSTATE)
+#define bfin_write_PINT1_PINSTATE(val)		bfin_write32(PINT1_PINSTATE, val)
+#define bfin_read_PINT1_LATCH()			bfin_read32(PINT1_LATCH)
+#define bfin_write_PINT1_LATCH(val)		bfin_write32(PINT1_LATCH, val)
+
+/* Port Interrubfin_read_()t 2 Registers (32-bit) */
+
+#define bfin_read_PINT2_MASK_SET()		bfin_read32(PINT2_MASK_SET)
+#define bfin_write_PINT2_MASK_SET(val)		bfin_write32(PINT2_MASK_SET, val)
+#define bfin_read_PINT2_MASK_CLEAR()		bfin_read32(PINT2_MASK_CLEAR)
+#define bfin_write_PINT2_MASK_CLEAR(val)	bfin_write32(PINT2_MASK_CLEAR, val)
+#define bfin_read_PINT2_REQUEST()		bfin_read32(PINT2_REQUEST)
+#define bfin_write_PINT2_REQUEST(val)		bfin_write32(PINT2_REQUEST, val)
+#define bfin_read_PINT2_ASSIGN()		bfin_read32(PINT2_ASSIGN)
+#define bfin_write_PINT2_ASSIGN(val)		bfin_write32(PINT2_ASSIGN, val)
+#define bfin_read_PINT2_EDGE_SET()		bfin_read32(PINT2_EDGE_SET)
+#define bfin_write_PINT2_EDGE_SET(val)		bfin_write32(PINT2_EDGE_SET, val)
+#define bfin_read_PINT2_EDGE_CLEAR()		bfin_read32(PINT2_EDGE_CLEAR)
+#define bfin_write_PINT2_EDGE_CLEAR(val)	bfin_write32(PINT2_EDGE_CLEAR, val)
+#define bfin_read_PINT2_INVERT_SET()		bfin_read32(PINT2_INVERT_SET)
+#define bfin_write_PINT2_INVERT_SET(val)	bfin_write32(PINT2_INVERT_SET, val)
+#define bfin_read_PINT2_INVERT_CLEAR()		bfin_read32(PINT2_INVERT_CLEAR)
+#define bfin_write_PINT2_INVERT_CLEAR(val)	bfin_write32(PINT2_INVERT_CLEAR, val)
+#define bfin_read_PINT2_PINSTATE()		bfin_read32(PINT2_PINSTATE)
+#define bfin_write_PINT2_PINSTATE(val)		bfin_write32(PINT2_PINSTATE, val)
+#define bfin_read_PINT2_LATCH()			bfin_read32(PINT2_LATCH)
+#define bfin_write_PINT2_LATCH(val)		bfin_write32(PINT2_LATCH, val)
+
+/* Port Interrubfin_read_()t 3 Registers (32-bit) */
+
+#define bfin_read_PINT3_MASK_SET()		bfin_read32(PINT3_MASK_SET)
+#define bfin_write_PINT3_MASK_SET(val)		bfin_write32(PINT3_MASK_SET, val)
+#define bfin_read_PINT3_MASK_CLEAR()		bfin_read32(PINT3_MASK_CLEAR)
+#define bfin_write_PINT3_MASK_CLEAR(val)	bfin_write32(PINT3_MASK_CLEAR, val)
+#define bfin_read_PINT3_REQUEST()		bfin_read32(PINT3_REQUEST)
+#define bfin_write_PINT3_REQUEST(val)		bfin_write32(PINT3_REQUEST, val)
+#define bfin_read_PINT3_ASSIGN()		bfin_read32(PINT3_ASSIGN)
+#define bfin_write_PINT3_ASSIGN(val)		bfin_write32(PINT3_ASSIGN, val)
+#define bfin_read_PINT3_EDGE_SET()		bfin_read32(PINT3_EDGE_SET)
+#define bfin_write_PINT3_EDGE_SET(val)		bfin_write32(PINT3_EDGE_SET, val)
+#define bfin_read_PINT3_EDGE_CLEAR()		bfin_read32(PINT3_EDGE_CLEAR)
+#define bfin_write_PINT3_EDGE_CLEAR(val)	bfin_write32(PINT3_EDGE_CLEAR, val)
+#define bfin_read_PINT3_INVERT_SET()		bfin_read32(PINT3_INVERT_SET)
+#define bfin_write_PINT3_INVERT_SET(val)	bfin_write32(PINT3_INVERT_SET, val)
+#define bfin_read_PINT3_INVERT_CLEAR()		bfin_read32(PINT3_INVERT_CLEAR)
+#define bfin_write_PINT3_INVERT_CLEAR(val)	bfin_write32(PINT3_INVERT_CLEAR, val)
+#define bfin_read_PINT3_PINSTATE()		bfin_read32(PINT3_PINSTATE)
+#define bfin_write_PINT3_PINSTATE(val)		bfin_write32(PINT3_PINSTATE, val)
+#define bfin_read_PINT3_LATCH()			bfin_read32(PINT3_LATCH)
+#define bfin_write_PINT3_LATCH(val)		bfin_write32(PINT3_LATCH, val)
+
+/* Port A Registers */
+
+#define bfin_read_PORTA_FER()		bfin_read16(PORTA_FER)
+#define bfin_write_PORTA_FER(val)	bfin_write16(PORTA_FER, val)
+#define bfin_read_PORTA()		bfin_read16(PORTA)
+#define bfin_write_PORTA(val)		bfin_write16(PORTA, val)
+#define bfin_read_PORTA_SET()		bfin_read16(PORTA_SET)
+#define bfin_write_PORTA_SET(val)	bfin_write16(PORTA_SET, val)
+#define bfin_read_PORTA_CLEAR()		bfin_read16(PORTA_CLEAR)
+#define bfin_write_PORTA_CLEAR(val)	bfin_write16(PORTA_CLEAR, val)
+#define bfin_read_PORTA_DIR_SET()	bfin_read16(PORTA_DIR_SET)
+#define bfin_write_PORTA_DIR_SET(val)	bfin_write16(PORTA_DIR_SET, val)
+#define bfin_read_PORTA_DIR_CLEAR()	bfin_read16(PORTA_DIR_CLEAR)
+#define bfin_write_PORTA_DIR_CLEAR(val)	bfin_write16(PORTA_DIR_CLEAR, val)
+#define bfin_read_PORTA_INEN()		bfin_read16(PORTA_INEN)
+#define bfin_write_PORTA_INEN(val)	bfin_write16(PORTA_INEN, val)
+#define bfin_read_PORTA_MUX()		bfin_read32(PORTA_MUX)
+#define bfin_write_PORTA_MUX(val)	bfin_write32(PORTA_MUX, val)
+
+/* Port B Registers */
+
+#define bfin_read_PORTB_FER()		bfin_read16(PORTB_FER)
+#define bfin_write_PORTB_FER(val)	bfin_write16(PORTB_FER, val)
+#define bfin_read_PORTB()		bfin_read16(PORTB)
+#define bfin_write_PORTB(val)		bfin_write16(PORTB, val)
+#define bfin_read_PORTB_SET()		bfin_read16(PORTB_SET)
+#define bfin_write_PORTB_SET(val)	bfin_write16(PORTB_SET, val)
+#define bfin_read_PORTB_CLEAR()		bfin_read16(PORTB_CLEAR)
+#define bfin_write_PORTB_CLEAR(val)	bfin_write16(PORTB_CLEAR, val)
+#define bfin_read_PORTB_DIR_SET()	bfin_read16(PORTB_DIR_SET)
+#define bfin_write_PORTB_DIR_SET(val)	bfin_write16(PORTB_DIR_SET, val)
+#define bfin_read_PORTB_DIR_CLEAR()	bfin_read16(PORTB_DIR_CLEAR)
+#define bfin_write_PORTB_DIR_CLEAR(val)	bfin_write16(PORTB_DIR_CLEAR, val)
+#define bfin_read_PORTB_INEN()		bfin_read16(PORTB_INEN)
+#define bfin_write_PORTB_INEN(val)	bfin_write16(PORTB_INEN, val)
+#define bfin_read_PORTB_MUX()		bfin_read32(PORTB_MUX)
+#define bfin_write_PORTB_MUX(val)	bfin_write32(PORTB_MUX, val)
+
+/* Port C Registers */
+
+#define bfin_read_PORTC_FER()		bfin_read16(PORTC_FER)
+#define bfin_write_PORTC_FER(val)	bfin_write16(PORTC_FER, val)
+#define bfin_read_PORTC()		bfin_read16(PORTC)
+#define bfin_write_PORTC(val)		bfin_write16(PORTC, val)
+#define bfin_read_PORTC_SET()		bfin_read16(PORTC_SET)
+#define bfin_write_PORTC_SET(val)	bfin_write16(PORTC_SET, val)
+#define bfin_read_PORTC_CLEAR()		bfin_read16(PORTC_CLEAR)
+#define bfin_write_PORTC_CLEAR(val)	bfin_write16(PORTC_CLEAR, val)
+#define bfin_read_PORTC_DIR_SET()	bfin_read16(PORTC_DIR_SET)
+#define bfin_write_PORTC_DIR_SET(val)	bfin_write16(PORTC_DIR_SET, val)
+#define bfin_read_PORTC_DIR_CLEAR()	bfin_read16(PORTC_DIR_CLEAR)
+#define bfin_write_PORTC_DIR_CLEAR(val)	bfin_write16(PORTC_DIR_CLEAR, val)
+#define bfin_read_PORTC_INEN()		bfin_read16(PORTC_INEN)
+#define bfin_write_PORTC_INEN(val)	bfin_write16(PORTC_INEN, val)
+#define bfin_read_PORTC_MUX()		bfin_read32(PORTC_MUX)
+#define bfin_write_PORTC_MUX(val)	bfin_write32(PORTC_MUX, val)
+
+/* Port D Registers */
+
+#define bfin_read_PORTD_FER()		bfin_read16(PORTD_FER)
+#define bfin_write_PORTD_FER(val)	bfin_write16(PORTD_FER, val)
+#define bfin_read_PORTD()		bfin_read16(PORTD)
+#define bfin_write_PORTD(val)		bfin_write16(PORTD, val)
+#define bfin_read_PORTD_SET()		bfin_read16(PORTD_SET)
+#define bfin_write_PORTD_SET(val)	bfin_write16(PORTD_SET, val)
+#define bfin_read_PORTD_CLEAR()		bfin_read16(PORTD_CLEAR)
+#define bfin_write_PORTD_CLEAR(val)	bfin_write16(PORTD_CLEAR, val)
+#define bfin_read_PORTD_DIR_SET()	bfin_read16(PORTD_DIR_SET)
+#define bfin_write_PORTD_DIR_SET(val)	bfin_write16(PORTD_DIR_SET, val)
+#define bfin_read_PORTD_DIR_CLEAR()	bfin_read16(PORTD_DIR_CLEAR)
+#define bfin_write_PORTD_DIR_CLEAR(val)	bfin_write16(PORTD_DIR_CLEAR, val)
+#define bfin_read_PORTD_INEN()		bfin_read16(PORTD_INEN)
+#define bfin_write_PORTD_INEN(val)	bfin_write16(PORTD_INEN, val)
+#define bfin_read_PORTD_MUX()		bfin_read32(PORTD_MUX)
+#define bfin_write_PORTD_MUX(val)	bfin_write32(PORTD_MUX, val)
+
+/* Port E Registers */
+
+#define bfin_read_PORTE_FER()		bfin_read16(PORTE_FER)
+#define bfin_write_PORTE_FER(val)	bfin_write16(PORTE_FER, val)
+#define bfin_read_PORTE()		bfin_read16(PORTE)
+#define bfin_write_PORTE(val)		bfin_write16(PORTE, val)
+#define bfin_read_PORTE_SET()		bfin_read16(PORTE_SET)
+#define bfin_write_PORTE_SET(val)	bfin_write16(PORTE_SET, val)
+#define bfin_read_PORTE_CLEAR()		bfin_read16(PORTE_CLEAR)
+#define bfin_write_PORTE_CLEAR(val)	bfin_write16(PORTE_CLEAR, val)
+#define bfin_read_PORTE_DIR_SET()	bfin_read16(PORTE_DIR_SET)
+#define bfin_write_PORTE_DIR_SET(val)	bfin_write16(PORTE_DIR_SET, val)
+#define bfin_read_PORTE_DIR_CLEAR()	bfin_read16(PORTE_DIR_CLEAR)
+#define bfin_write_PORTE_DIR_CLEAR(val)	bfin_write16(PORTE_DIR_CLEAR, val)
+#define bfin_read_PORTE_INEN()		bfin_read16(PORTE_INEN)
+#define bfin_write_PORTE_INEN(val)	bfin_write16(PORTE_INEN, val)
+#define bfin_read_PORTE_MUX()		bfin_read32(PORTE_MUX)
+#define bfin_write_PORTE_MUX(val)	bfin_write32(PORTE_MUX, val)
+
+/* Port F Registers */
+
+#define bfin_read_PORTF_FER()		bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val)	bfin_write16(PORTF_FER, val)
+#define bfin_read_PORTF()		bfin_read16(PORTF)
+#define bfin_write_PORTF(val)		bfin_write16(PORTF, val)
+#define bfin_read_PORTF_SET()		bfin_read16(PORTF_SET)
+#define bfin_write_PORTF_SET(val)	bfin_write16(PORTF_SET, val)
+#define bfin_read_PORTF_CLEAR()		bfin_read16(PORTF_CLEAR)
+#define bfin_write_PORTF_CLEAR(val)	bfin_write16(PORTF_CLEAR, val)
+#define bfin_read_PORTF_DIR_SET()	bfin_read16(PORTF_DIR_SET)
+#define bfin_write_PORTF_DIR_SET(val)	bfin_write16(PORTF_DIR_SET, val)
+#define bfin_read_PORTF_DIR_CLEAR()	bfin_read16(PORTF_DIR_CLEAR)
+#define bfin_write_PORTF_DIR_CLEAR(val)	bfin_write16(PORTF_DIR_CLEAR, val)
+#define bfin_read_PORTF_INEN()		bfin_read16(PORTF_INEN)
+#define bfin_write_PORTF_INEN(val)	bfin_write16(PORTF_INEN, val)
+#define bfin_read_PORTF_MUX()		bfin_read32(PORTF_MUX)
+#define bfin_write_PORTF_MUX(val)	bfin_write32(PORTF_MUX, val)
+
+/* Port G Registers */
+
+#define bfin_read_PORTG_FER()		bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val)	bfin_write16(PORTG_FER, val)
+#define bfin_read_PORTG()		bfin_read16(PORTG)
+#define bfin_write_PORTG(val)		bfin_write16(PORTG, val)
+#define bfin_read_PORTG_SET()		bfin_read16(PORTG_SET)
+#define bfin_write_PORTG_SET(val)	bfin_write16(PORTG_SET, val)
+#define bfin_read_PORTG_CLEAR()		bfin_read16(PORTG_CLEAR)
+#define bfin_write_PORTG_CLEAR(val)	bfin_write16(PORTG_CLEAR, val)
+#define bfin_read_PORTG_DIR_SET()	bfin_read16(PORTG_DIR_SET)
+#define bfin_write_PORTG_DIR_SET(val)	bfin_write16(PORTG_DIR_SET, val)
+#define bfin_read_PORTG_DIR_CLEAR()	bfin_read16(PORTG_DIR_CLEAR)
+#define bfin_write_PORTG_DIR_CLEAR(val)	bfin_write16(PORTG_DIR_CLEAR, val)
+#define bfin_read_PORTG_INEN()		bfin_read16(PORTG_INEN)
+#define bfin_write_PORTG_INEN(val)	bfin_write16(PORTG_INEN, val)
+#define bfin_read_PORTG_MUX()		bfin_read32(PORTG_MUX)
+#define bfin_write_PORTG_MUX(val)	bfin_write32(PORTG_MUX, val)
+
+/* Port H Registers */
+
+#define bfin_read_PORTH_FER()		bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val)	bfin_write16(PORTH_FER, val)
+#define bfin_read_PORTH()		bfin_read16(PORTH)
+#define bfin_write_PORTH(val)		bfin_write16(PORTH, val)
+#define bfin_read_PORTH_SET()		bfin_read16(PORTH_SET)
+#define bfin_write_PORTH_SET(val)	bfin_write16(PORTH_SET, val)
+#define bfin_read_PORTH_CLEAR()		bfin_read16(PORTH_CLEAR)
+#define bfin_write_PORTH_CLEAR(val)	bfin_write16(PORTH_CLEAR, val)
+#define bfin_read_PORTH_DIR_SET()	bfin_read16(PORTH_DIR_SET)
+#define bfin_write_PORTH_DIR_SET(val)	bfin_write16(PORTH_DIR_SET, val)
+#define bfin_read_PORTH_DIR_CLEAR()	bfin_read16(PORTH_DIR_CLEAR)
+#define bfin_write_PORTH_DIR_CLEAR(val)	bfin_write16(PORTH_DIR_CLEAR, val)
+#define bfin_read_PORTH_INEN()		bfin_read16(PORTH_INEN)
+#define bfin_write_PORTH_INEN(val)	bfin_write16(PORTH_INEN, val)
+#define bfin_read_PORTH_MUX()		bfin_read32(PORTH_MUX)
+#define bfin_write_PORTH_MUX(val)	bfin_write32(PORTH_MUX, val)
+
+/* Port I Registers */
+
+#define bfin_read_PORTI_FER()		bfin_read16(PORTI_FER)
+#define bfin_write_PORTI_FER(val)	bfin_write16(PORTI_FER, val)
+#define bfin_read_PORTI()		bfin_read16(PORTI)
+#define bfin_write_PORTI(val)		bfin_write16(PORTI, val)
+#define bfin_read_PORTI_SET()		bfin_read16(PORTI_SET)
+#define bfin_write_PORTI_SET(val)	bfin_write16(PORTI_SET, val)
+#define bfin_read_PORTI_CLEAR()		bfin_read16(PORTI_CLEAR)
+#define bfin_write_PORTI_CLEAR(val)	bfin_write16(PORTI_CLEAR, val)
+#define bfin_read_PORTI_DIR_SET()	bfin_read16(PORTI_DIR_SET)
+#define bfin_write_PORTI_DIR_SET(val)	bfin_write16(PORTI_DIR_SET, val)
+#define bfin_read_PORTI_DIR_CLEAR()	bfin_read16(PORTI_DIR_CLEAR)
+#define bfin_write_PORTI_DIR_CLEAR(val)	bfin_write16(PORTI_DIR_CLEAR, val)
+#define bfin_read_PORTI_INEN()		bfin_read16(PORTI_INEN)
+#define bfin_write_PORTI_INEN(val)	bfin_write16(PORTI_INEN, val)
+#define bfin_read_PORTI_MUX()		bfin_read32(PORTI_MUX)
+#define bfin_write_PORTI_MUX(val)	bfin_write32(PORTI_MUX, val)
+
+/* Port J Registers */
+
+#define bfin_read_PORTJ_FER()		bfin_read16(PORTJ_FER)
+#define bfin_write_PORTJ_FER(val)	bfin_write16(PORTJ_FER, val)
+#define bfin_read_PORTJ()		bfin_read16(PORTJ)
+#define bfin_write_PORTJ(val)		bfin_write16(PORTJ, val)
+#define bfin_read_PORTJ_SET()		bfin_read16(PORTJ_SET)
+#define bfin_write_PORTJ_SET(val)	bfin_write16(PORTJ_SET, val)
+#define bfin_read_PORTJ_CLEAR()		bfin_read16(PORTJ_CLEAR)
+#define bfin_write_PORTJ_CLEAR(val)	bfin_write16(PORTJ_CLEAR, val)
+#define bfin_read_PORTJ_DIR_SET()	bfin_read16(PORTJ_DIR_SET)
+#define bfin_write_PORTJ_DIR_SET(val)	bfin_write16(PORTJ_DIR_SET, val)
+#define bfin_read_PORTJ_DIR_CLEAR()	bfin_read16(PORTJ_DIR_CLEAR)
+#define bfin_write_PORTJ_DIR_CLEAR(val)	bfin_write16(PORTJ_DIR_CLEAR, val)
+#define bfin_read_PORTJ_INEN()		bfin_read16(PORTJ_INEN)
+#define bfin_write_PORTJ_INEN(val)	bfin_write16(PORTJ_INEN, val)
+#define bfin_read_PORTJ_MUX()		bfin_read32(PORTJ_MUX)
+#define bfin_write_PORTJ_MUX(val)	bfin_write32(PORTJ_MUX, val)
+
+/* PWM Timer Registers */
+
+#define bfin_read_TIMER0_CONFIG()		bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)		bfin_write16(TIMER0_CONFIG, val)
+#define bfin_read_TIMER0_COUNTER()		bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)		bfin_write32(TIMER0_COUNTER, val)
+#define bfin_read_TIMER0_PERIOD()		bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)		bfin_write32(TIMER0_PERIOD, val)
+#define bfin_read_TIMER0_WIDTH()		bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)		bfin_write32(TIMER0_WIDTH, val)
+#define bfin_read_TIMER1_CONFIG()		bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)		bfin_write16(TIMER1_CONFIG, val)
+#define bfin_read_TIMER1_COUNTER()		bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)		bfin_write32(TIMER1_COUNTER, val)
+#define bfin_read_TIMER1_PERIOD()		bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)		bfin_write32(TIMER1_PERIOD, val)
+#define bfin_read_TIMER1_WIDTH()		bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)		bfin_write32(TIMER1_WIDTH, val)
+#define bfin_read_TIMER2_CONFIG()		bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)		bfin_write16(TIMER2_CONFIG, val)
+#define bfin_read_TIMER2_COUNTER()		bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)		bfin_write32(TIMER2_COUNTER, val)
+#define bfin_read_TIMER2_PERIOD()		bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)		bfin_write32(TIMER2_PERIOD, val)
+#define bfin_read_TIMER2_WIDTH()		bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)		bfin_write32(TIMER2_WIDTH, val)
+#define bfin_read_TIMER3_CONFIG()		bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)		bfin_write16(TIMER3_CONFIG, val)
+#define bfin_read_TIMER3_COUNTER()		bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)		bfin_write32(TIMER3_COUNTER, val)
+#define bfin_read_TIMER3_PERIOD()		bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)		bfin_write32(TIMER3_PERIOD, val)
+#define bfin_read_TIMER3_WIDTH()		bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)		bfin_write32(TIMER3_WIDTH, val)
+#define bfin_read_TIMER4_CONFIG()		bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)		bfin_write16(TIMER4_CONFIG, val)
+#define bfin_read_TIMER4_COUNTER()		bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)		bfin_write32(TIMER4_COUNTER, val)
+#define bfin_read_TIMER4_PERIOD()		bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)		bfin_write32(TIMER4_PERIOD, val)
+#define bfin_read_TIMER4_WIDTH()		bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)		bfin_write32(TIMER4_WIDTH, val)
+#define bfin_read_TIMER5_CONFIG()		bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)		bfin_write16(TIMER5_CONFIG, val)
+#define bfin_read_TIMER5_COUNTER()		bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)		bfin_write32(TIMER5_COUNTER, val)
+#define bfin_read_TIMER5_PERIOD()		bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)		bfin_write32(TIMER5_PERIOD, val)
+#define bfin_read_TIMER5_WIDTH()		bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)		bfin_write32(TIMER5_WIDTH, val)
+#define bfin_read_TIMER6_CONFIG()		bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)		bfin_write16(TIMER6_CONFIG, val)
+#define bfin_read_TIMER6_COUNTER()		bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)		bfin_write32(TIMER6_COUNTER, val)
+#define bfin_read_TIMER6_PERIOD()		bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)		bfin_write32(TIMER6_PERIOD, val)
+#define bfin_read_TIMER6_WIDTH()		bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)		bfin_write32(TIMER6_WIDTH, val)
+#define bfin_read_TIMER7_CONFIG()		bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)		bfin_write16(TIMER7_CONFIG, val)
+#define bfin_read_TIMER7_COUNTER()		bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)		bfin_write32(TIMER7_COUNTER, val)
+#define bfin_read_TIMER7_PERIOD()		bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)		bfin_write32(TIMER7_PERIOD, val)
+#define bfin_read_TIMER7_WIDTH()		bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)		bfin_write32(TIMER7_WIDTH, val)
+
+/* Timer Groubfin_read_() of 8 */
+
+#define bfin_read_TIMER_ENABLE0()		bfin_read16(TIMER_ENABLE0)
+#define bfin_write_TIMER_ENABLE0(val)		bfin_write16(TIMER_ENABLE0, val)
+#define bfin_read_TIMER_DISABLE0()		bfin_read16(TIMER_DISABLE0)
+#define bfin_write_TIMER_DISABLE0(val)		bfin_write16(TIMER_DISABLE0, val)
+#define bfin_read_TIMER_STATUS0()		bfin_read32(TIMER_STATUS0)
+#define bfin_write_TIMER_STATUS0(val)		bfin_write32(TIMER_STATUS0, val)
+
+/* DMAC1 Registers */
+
+#define bfin_read_DMAC1_TCPER()			bfin_read16(DMAC1_TCPER)
+#define bfin_write_DMAC1_TCPER(val)		bfin_write16(DMAC1_TCPER, val)
+#define bfin_read_DMAC1_TCCNT()			bfin_read16(DMAC1_TCCNT)
+#define bfin_write_DMAC1_TCCNT(val)		bfin_write16(DMAC1_TCCNT, val)
+
+/* DMA Channel 12 Registers */
+
+#define bfin_read_DMA12_NEXT_DESC_PTR() 	bfin_read32(DMA12_NEXT_DESC_PTR)
+#define bfin_write_DMA12_NEXT_DESC_PTR(val) 	bfin_write32(DMA12_NEXT_DESC_PTR, val)
+#define bfin_read_DMA12_START_ADDR() 		bfin_read32(DMA12_START_ADDR)
+#define bfin_write_DMA12_START_ADDR(val) 	bfin_write32(DMA12_START_ADDR, val)
+#define bfin_read_DMA12_CONFIG()		bfin_read16(DMA12_CONFIG)
+#define bfin_write_DMA12_CONFIG(val)		bfin_write16(DMA12_CONFIG, val)
+#define bfin_read_DMA12_X_COUNT()		bfin_read16(DMA12_X_COUNT)
+#define bfin_write_DMA12_X_COUNT(val)		bfin_write16(DMA12_X_COUNT, val)
+#define bfin_read_DMA12_X_MODIFY()		bfin_read16(DMA12_X_MODIFY)
+#define bfin_write_DMA12_X_MODIFY(val) 		bfin_write16(DMA12_X_MODIFY, val)
+#define bfin_read_DMA12_Y_COUNT()		bfin_read16(DMA12_Y_COUNT)
+#define bfin_write_DMA12_Y_COUNT(val)		bfin_write16(DMA12_Y_COUNT, val)
+#define bfin_read_DMA12_Y_MODIFY()		bfin_read16(DMA12_Y_MODIFY)
+#define bfin_write_DMA12_Y_MODIFY(val) 		bfin_write16(DMA12_Y_MODIFY, val)
+#define bfin_read_DMA12_CURR_DESC_PTR() 	bfin_read32(DMA12_CURR_DESC_PTR)
+#define bfin_write_DMA12_CURR_DESC_PTR(val) 	bfin_write32(DMA12_CURR_DESC_PTR, val)
+#define bfin_read_DMA12_CURR_ADDR() 		bfin_read32(DMA12_CURR_ADDR)
+#define bfin_write_DMA12_CURR_ADDR(val) 	bfin_write32(DMA12_CURR_ADDR, val)
+#define bfin_read_DMA12_IRQ_STATUS()		bfin_read16(DMA12_IRQ_STATUS)
+#define bfin_write_DMA12_IRQ_STATUS(val)	bfin_write16(DMA12_IRQ_STATUS, val)
+#define bfin_read_DMA12_PERIPHERAL_MAP()	bfin_read16(DMA12_PERIPHERAL_MAP)
+#define bfin_write_DMA12_PERIPHERAL_MAP(val)	bfin_write16(DMA12_PERIPHERAL_MAP, val)
+#define bfin_read_DMA12_CURR_X_COUNT()		bfin_read16(DMA12_CURR_X_COUNT)
+#define bfin_write_DMA12_CURR_X_COUNT(val)	bfin_write16(DMA12_CURR_X_COUNT, val)
+#define bfin_read_DMA12_CURR_Y_COUNT()		bfin_read16(DMA12_CURR_Y_COUNT)
+#define bfin_write_DMA12_CURR_Y_COUNT(val)	bfin_write16(DMA12_CURR_Y_COUNT, val)
+
+/* DMA Channel 13 Registers */
+
+#define bfin_read_DMA13_NEXT_DESC_PTR() 	bfin_read32(DMA13_NEXT_DESC_PTR)
+#define bfin_write_DMA13_NEXT_DESC_PTR(val) 	bfin_write32(DMA13_NEXT_DESC_PTR, val)
+#define bfin_read_DMA13_START_ADDR() 		bfin_read32(DMA13_START_ADDR)
+#define bfin_write_DMA13_START_ADDR(val) 	bfin_write32(DMA13_START_ADDR, val)
+#define bfin_read_DMA13_CONFIG()		bfin_read16(DMA13_CONFIG)
+#define bfin_write_DMA13_CONFIG(val)		bfin_write16(DMA13_CONFIG, val)
+#define bfin_read_DMA13_X_COUNT()		bfin_read16(DMA13_X_COUNT)
+#define bfin_write_DMA13_X_COUNT(val)		bfin_write16(DMA13_X_COUNT, val)
+#define bfin_read_DMA13_X_MODIFY()		bfin_read16(DMA13_X_MODIFY)
+#define bfin_write_DMA13_X_MODIFY(val) 		bfin_write16(DMA13_X_MODIFY, val)
+#define bfin_read_DMA13_Y_COUNT()		bfin_read16(DMA13_Y_COUNT)
+#define bfin_write_DMA13_Y_COUNT(val)		bfin_write16(DMA13_Y_COUNT, val)
+#define bfin_read_DMA13_Y_MODIFY()		bfin_read16(DMA13_Y_MODIFY)
+#define bfin_write_DMA13_Y_MODIFY(val) 		bfin_write16(DMA13_Y_MODIFY, val)
+#define bfin_read_DMA13_CURR_DESC_PTR() 	bfin_read32(DMA13_CURR_DESC_PTR)
+#define bfin_write_DMA13_CURR_DESC_PTR(val) 	bfin_write32(DMA13_CURR_DESC_PTR, val)
+#define bfin_read_DMA13_CURR_ADDR() 		bfin_read32(DMA13_CURR_ADDR)
+#define bfin_write_DMA13_CURR_ADDR(val) 	bfin_write32(DMA13_CURR_ADDR, val)
+#define bfin_read_DMA13_IRQ_STATUS()		bfin_read16(DMA13_IRQ_STATUS)
+#define bfin_write_DMA13_IRQ_STATUS(val)	bfin_write16(DMA13_IRQ_STATUS, val)
+#define bfin_read_DMA13_PERIPHERAL_MAP()	bfin_read16(DMA13_PERIPHERAL_MAP)
+#define bfin_write_DMA13_PERIPHERAL_MAP(val)	bfin_write16(DMA13_PERIPHERAL_MAP, val)
+#define bfin_read_DMA13_CURR_X_COUNT()		bfin_read16(DMA13_CURR_X_COUNT)
+#define bfin_write_DMA13_CURR_X_COUNT(val)	bfin_write16(DMA13_CURR_X_COUNT, val)
+#define bfin_read_DMA13_CURR_Y_COUNT()		bfin_read16(DMA13_CURR_Y_COUNT)
+#define bfin_write_DMA13_CURR_Y_COUNT(val)	bfin_write16(DMA13_CURR_Y_COUNT, val)
+
+/* DMA Channel 14 Registers */
+
+#define bfin_read_DMA14_NEXT_DESC_PTR() 	bfin_read32(DMA14_NEXT_DESC_PTR)
+#define bfin_write_DMA14_NEXT_DESC_PTR(val) 	bfin_write32(DMA14_NEXT_DESC_PTR, val)
+#define bfin_read_DMA14_START_ADDR() 		bfin_read32(DMA14_START_ADDR)
+#define bfin_write_DMA14_START_ADDR(val) 	bfin_write32(DMA14_START_ADDR, val)
+#define bfin_read_DMA14_CONFIG()		bfin_read16(DMA14_CONFIG)
+#define bfin_write_DMA14_CONFIG(val)		bfin_write16(DMA14_CONFIG, val)
+#define bfin_read_DMA14_X_COUNT()		bfin_read16(DMA14_X_COUNT)
+#define bfin_write_DMA14_X_COUNT(val)		bfin_write16(DMA14_X_COUNT, val)
+#define bfin_read_DMA14_X_MODIFY()		bfin_read16(DMA14_X_MODIFY)
+#define bfin_write_DMA14_X_MODIFY(val) 		bfin_write16(DMA14_X_MODIFY, val)
+#define bfin_read_DMA14_Y_COUNT()		bfin_read16(DMA14_Y_COUNT)
+#define bfin_write_DMA14_Y_COUNT(val)		bfin_write16(DMA14_Y_COUNT, val)
+#define bfin_read_DMA14_Y_MODIFY()		bfin_read16(DMA14_Y_MODIFY)
+#define bfin_write_DMA14_Y_MODIFY(val) 		bfin_write16(DMA14_Y_MODIFY, val)
+#define bfin_read_DMA14_CURR_DESC_PTR() 	bfin_read32(DMA14_CURR_DESC_PTR)
+#define bfin_write_DMA14_CURR_DESC_PTR(val) 	bfin_write32(DMA14_CURR_DESC_PTR, val)
+#define bfin_read_DMA14_CURR_ADDR() 		bfin_read32(DMA14_CURR_ADDR)
+#define bfin_write_DMA14_CURR_ADDR(val) 	bfin_write32(DMA14_CURR_ADDR, val)
+#define bfin_read_DMA14_IRQ_STATUS()		bfin_read16(DMA14_IRQ_STATUS)
+#define bfin_write_DMA14_IRQ_STATUS(val)	bfin_write16(DMA14_IRQ_STATUS, val)
+#define bfin_read_DMA14_PERIPHERAL_MAP()	bfin_read16(DMA14_PERIPHERAL_MAP)
+#define bfin_write_DMA14_PERIPHERAL_MAP(val)	bfin_write16(DMA14_PERIPHERAL_MAP, val)
+#define bfin_read_DMA14_CURR_X_COUNT()		bfin_read16(DMA14_CURR_X_COUNT)
+#define bfin_write_DMA14_CURR_X_COUNT(val)	bfin_write16(DMA14_CURR_X_COUNT, val)
+#define bfin_read_DMA14_CURR_Y_COUNT()		bfin_read16(DMA14_CURR_Y_COUNT)
+#define bfin_write_DMA14_CURR_Y_COUNT(val)	bfin_write16(DMA14_CURR_Y_COUNT, val)
+
+/* DMA Channel 15 Registers */
+
+#define bfin_read_DMA15_NEXT_DESC_PTR() 	bfin_read32(DMA15_NEXT_DESC_PTR)
+#define bfin_write_DMA15_NEXT_DESC_PTR(val) 	bfin_write32(DMA15_NEXT_DESC_PTR, val)
+#define bfin_read_DMA15_START_ADDR() 		bfin_read32(DMA15_START_ADDR)
+#define bfin_write_DMA15_START_ADDR(val) 	bfin_write32(DMA15_START_ADDR, val)
+#define bfin_read_DMA15_CONFIG()		bfin_read16(DMA15_CONFIG)
+#define bfin_write_DMA15_CONFIG(val)		bfin_write16(DMA15_CONFIG, val)
+#define bfin_read_DMA15_X_COUNT()		bfin_read16(DMA15_X_COUNT)
+#define bfin_write_DMA15_X_COUNT(val)		bfin_write16(DMA15_X_COUNT, val)
+#define bfin_read_DMA15_X_MODIFY()		bfin_read16(DMA15_X_MODIFY)
+#define bfin_write_DMA15_X_MODIFY(val) 		bfin_write16(DMA15_X_MODIFY, val)
+#define bfin_read_DMA15_Y_COUNT()		bfin_read16(DMA15_Y_COUNT)
+#define bfin_write_DMA15_Y_COUNT(val)		bfin_write16(DMA15_Y_COUNT, val)
+#define bfin_read_DMA15_Y_MODIFY()		bfin_read16(DMA15_Y_MODIFY)
+#define bfin_write_DMA15_Y_MODIFY(val) 		bfin_write16(DMA15_Y_MODIFY, val)
+#define bfin_read_DMA15_CURR_DESC_PTR() 	bfin_read32(DMA15_CURR_DESC_PTR)
+#define bfin_write_DMA15_CURR_DESC_PTR(val) 	bfin_write32(DMA15_CURR_DESC_PTR, val)
+#define bfin_read_DMA15_CURR_ADDR() 		bfin_read32(DMA15_CURR_ADDR)
+#define bfin_write_DMA15_CURR_ADDR(val) 	bfin_write32(DMA15_CURR_ADDR, val)
+#define bfin_read_DMA15_IRQ_STATUS()		bfin_read16(DMA15_IRQ_STATUS)
+#define bfin_write_DMA15_IRQ_STATUS(val)	bfin_write16(DMA15_IRQ_STATUS, val)
+#define bfin_read_DMA15_PERIPHERAL_MAP()	bfin_read16(DMA15_PERIPHERAL_MAP)
+#define bfin_write_DMA15_PERIPHERAL_MAP(val)	bfin_write16(DMA15_PERIPHERAL_MAP, val)
+#define bfin_read_DMA15_CURR_X_COUNT()		bfin_read16(DMA15_CURR_X_COUNT)
+#define bfin_write_DMA15_CURR_X_COUNT(val)	bfin_write16(DMA15_CURR_X_COUNT, val)
+#define bfin_read_DMA15_CURR_Y_COUNT()		bfin_read16(DMA15_CURR_Y_COUNT)
+#define bfin_write_DMA15_CURR_Y_COUNT(val)	bfin_write16(DMA15_CURR_Y_COUNT, val)
+
+/* DMA Channel 16 Registers */
+
+#define bfin_read_DMA16_NEXT_DESC_PTR() 	bfin_read32(DMA16_NEXT_DESC_PTR)
+#define bfin_write_DMA16_NEXT_DESC_PTR(val) 	bfin_write32(DMA16_NEXT_DESC_PTR, val)
+#define bfin_read_DMA16_START_ADDR() 		bfin_read32(DMA16_START_ADDR)
+#define bfin_write_DMA16_START_ADDR(val) 	bfin_write32(DMA16_START_ADDR, val)
+#define bfin_read_DMA16_CONFIG()		bfin_read16(DMA16_CONFIG)
+#define bfin_write_DMA16_CONFIG(val)		bfin_write16(DMA16_CONFIG, val)
+#define bfin_read_DMA16_X_COUNT()		bfin_read16(DMA16_X_COUNT)
+#define bfin_write_DMA16_X_COUNT(val)		bfin_write16(DMA16_X_COUNT, val)
+#define bfin_read_DMA16_X_MODIFY()		bfin_read16(DMA16_X_MODIFY)
+#define bfin_write_DMA16_X_MODIFY(val) 		bfin_write16(DMA16_X_MODIFY, val)
+#define bfin_read_DMA16_Y_COUNT()		bfin_read16(DMA16_Y_COUNT)
+#define bfin_write_DMA16_Y_COUNT(val)		bfin_write16(DMA16_Y_COUNT, val)
+#define bfin_read_DMA16_Y_MODIFY()		bfin_read16(DMA16_Y_MODIFY)
+#define bfin_write_DMA16_Y_MODIFY(val) 		bfin_write16(DMA16_Y_MODIFY, val)
+#define bfin_read_DMA16_CURR_DESC_PTR() 	bfin_read32(DMA16_CURR_DESC_PTR)
+#define bfin_write_DMA16_CURR_DESC_PTR(val) 	bfin_write32(DMA16_CURR_DESC_PTR, val)
+#define bfin_read_DMA16_CURR_ADDR() 		bfin_read32(DMA16_CURR_ADDR)
+#define bfin_write_DMA16_CURR_ADDR(val) 	bfin_write32(DMA16_CURR_ADDR, val)
+#define bfin_read_DMA16_IRQ_STATUS()		bfin_read16(DMA16_IRQ_STATUS)
+#define bfin_write_DMA16_IRQ_STATUS(val)	bfin_write16(DMA16_IRQ_STATUS, val)
+#define bfin_read_DMA16_PERIPHERAL_MAP()	bfin_read16(DMA16_PERIPHERAL_MAP)
+#define bfin_write_DMA16_PERIPHERAL_MAP(val)	bfin_write16(DMA16_PERIPHERAL_MAP, val)
+#define bfin_read_DMA16_CURR_X_COUNT()		bfin_read16(DMA16_CURR_X_COUNT)
+#define bfin_write_DMA16_CURR_X_COUNT(val)	bfin_write16(DMA16_CURR_X_COUNT, val)
+#define bfin_read_DMA16_CURR_Y_COUNT()		bfin_read16(DMA16_CURR_Y_COUNT)
+#define bfin_write_DMA16_CURR_Y_COUNT(val)	bfin_write16(DMA16_CURR_Y_COUNT, val)
+
+/* DMA Channel 17 Registers */
+
+#define bfin_read_DMA17_NEXT_DESC_PTR() 	bfin_read32(DMA17_NEXT_DESC_PTR)
+#define bfin_write_DMA17_NEXT_DESC_PTR(val) 	bfin_write32(DMA17_NEXT_DESC_PTR, val)
+#define bfin_read_DMA17_START_ADDR() 		bfin_read32(DMA17_START_ADDR)
+#define bfin_write_DMA17_START_ADDR(val) 	bfin_write32(DMA17_START_ADDR, val)
+#define bfin_read_DMA17_CONFIG()		bfin_read16(DMA17_CONFIG)
+#define bfin_write_DMA17_CONFIG(val)		bfin_write16(DMA17_CONFIG, val)
+#define bfin_read_DMA17_X_COUNT()		bfin_read16(DMA17_X_COUNT)
+#define bfin_write_DMA17_X_COUNT(val)		bfin_write16(DMA17_X_COUNT, val)
+#define bfin_read_DMA17_X_MODIFY()		bfin_read16(DMA17_X_MODIFY)
+#define bfin_write_DMA17_X_MODIFY(val) 		bfin_write16(DMA17_X_MODIFY, val)
+#define bfin_read_DMA17_Y_COUNT()		bfin_read16(DMA17_Y_COUNT)
+#define bfin_write_DMA17_Y_COUNT(val)		bfin_write16(DMA17_Y_COUNT, val)
+#define bfin_read_DMA17_Y_MODIFY()		bfin_read16(DMA17_Y_MODIFY)
+#define bfin_write_DMA17_Y_MODIFY(val) 		bfin_write16(DMA17_Y_MODIFY, val)
+#define bfin_read_DMA17_CURR_DESC_PTR() 	bfin_read32(DMA17_CURR_DESC_PTR)
+#define bfin_write_DMA17_CURR_DESC_PTR(val) 	bfin_write32(DMA17_CURR_DESC_PTR, val)
+#define bfin_read_DMA17_CURR_ADDR() 		bfin_read32(DMA17_CURR_ADDR)
+#define bfin_write_DMA17_CURR_ADDR(val) 	bfin_write32(DMA17_CURR_ADDR, val)
+#define bfin_read_DMA17_IRQ_STATUS()		bfin_read16(DMA17_IRQ_STATUS)
+#define bfin_write_DMA17_IRQ_STATUS(val)	bfin_write16(DMA17_IRQ_STATUS, val)
+#define bfin_read_DMA17_PERIPHERAL_MAP()	bfin_read16(DMA17_PERIPHERAL_MAP)
+#define bfin_write_DMA17_PERIPHERAL_MAP(val)	bfin_write16(DMA17_PERIPHERAL_MAP, val)
+#define bfin_read_DMA17_CURR_X_COUNT()		bfin_read16(DMA17_CURR_X_COUNT)
+#define bfin_write_DMA17_CURR_X_COUNT(val)	bfin_write16(DMA17_CURR_X_COUNT, val)
+#define bfin_read_DMA17_CURR_Y_COUNT()		bfin_read16(DMA17_CURR_Y_COUNT)
+#define bfin_write_DMA17_CURR_Y_COUNT(val)	bfin_write16(DMA17_CURR_Y_COUNT, val)
+
+/* DMA Channel 18 Registers */
+
+#define bfin_read_DMA18_NEXT_DESC_PTR() 	bfin_read32(DMA18_NEXT_DESC_PTR)
+#define bfin_write_DMA18_NEXT_DESC_PTR(val) 	bfin_write32(DMA18_NEXT_DESC_PTR, val)
+#define bfin_read_DMA18_START_ADDR() 		bfin_read32(DMA18_START_ADDR)
+#define bfin_write_DMA18_START_ADDR(val) 	bfin_write32(DMA18_START_ADDR, val)
+#define bfin_read_DMA18_CONFIG()		bfin_read16(DMA18_CONFIG)
+#define bfin_write_DMA18_CONFIG(val)		bfin_write16(DMA18_CONFIG, val)
+#define bfin_read_DMA18_X_COUNT()		bfin_read16(DMA18_X_COUNT)
+#define bfin_write_DMA18_X_COUNT(val)		bfin_write16(DMA18_X_COUNT, val)
+#define bfin_read_DMA18_X_MODIFY()		bfin_read16(DMA18_X_MODIFY)
+#define bfin_write_DMA18_X_MODIFY(val) 		bfin_write16(DMA18_X_MODIFY, val)
+#define bfin_read_DMA18_Y_COUNT()		bfin_read16(DMA18_Y_COUNT)
+#define bfin_write_DMA18_Y_COUNT(val)		bfin_write16(DMA18_Y_COUNT, val)
+#define bfin_read_DMA18_Y_MODIFY()		bfin_read16(DMA18_Y_MODIFY)
+#define bfin_write_DMA18_Y_MODIFY(val) 		bfin_write16(DMA18_Y_MODIFY, val)
+#define bfin_read_DMA18_CURR_DESC_PTR() 	bfin_read32(DMA18_CURR_DESC_PTR)
+#define bfin_write_DMA18_CURR_DESC_PTR(val) 	bfin_write32(DMA18_CURR_DESC_PTR, val)
+#define bfin_read_DMA18_CURR_ADDR() 		bfin_read32(DMA18_CURR_ADDR)
+#define bfin_write_DMA18_CURR_ADDR(val) 	bfin_write32(DMA18_CURR_ADDR, val)
+#define bfin_read_DMA18_IRQ_STATUS()		bfin_read16(DMA18_IRQ_STATUS)
+#define bfin_write_DMA18_IRQ_STATUS(val)	bfin_write16(DMA18_IRQ_STATUS, val)
+#define bfin_read_DMA18_PERIPHERAL_MAP()	bfin_read16(DMA18_PERIPHERAL_MAP)
+#define bfin_write_DMA18_PERIPHERAL_MAP(val)	bfin_write16(DMA18_PERIPHERAL_MAP, val)
+#define bfin_read_DMA18_CURR_X_COUNT()		bfin_read16(DMA18_CURR_X_COUNT)
+#define bfin_write_DMA18_CURR_X_COUNT(val)	bfin_write16(DMA18_CURR_X_COUNT, val)
+#define bfin_read_DMA18_CURR_Y_COUNT()		bfin_read16(DMA18_CURR_Y_COUNT)
+#define bfin_write_DMA18_CURR_Y_COUNT(val)	bfin_write16(DMA18_CURR_Y_COUNT, val)
+
+/* DMA Channel 19 Registers */
+
+#define bfin_read_DMA19_NEXT_DESC_PTR() 	bfin_read32(DMA19_NEXT_DESC_PTR)
+#define bfin_write_DMA19_NEXT_DESC_PTR(val) 	bfin_write32(DMA19_NEXT_DESC_PTR, val)
+#define bfin_read_DMA19_START_ADDR() 		bfin_read32(DMA19_START_ADDR)
+#define bfin_write_DMA19_START_ADDR(val) 	bfin_write32(DMA19_START_ADDR, val)
+#define bfin_read_DMA19_CONFIG()		bfin_read16(DMA19_CONFIG)
+#define bfin_write_DMA19_CONFIG(val)		bfin_write16(DMA19_CONFIG, val)
+#define bfin_read_DMA19_X_COUNT()		bfin_read16(DMA19_X_COUNT)
+#define bfin_write_DMA19_X_COUNT(val)		bfin_write16(DMA19_X_COUNT, val)
+#define bfin_read_DMA19_X_MODIFY()		bfin_read16(DMA19_X_MODIFY)
+#define bfin_write_DMA19_X_MODIFY(val) 		bfin_write16(DMA19_X_MODIFY, val)
+#define bfin_read_DMA19_Y_COUNT()		bfin_read16(DMA19_Y_COUNT)
+#define bfin_write_DMA19_Y_COUNT(val)		bfin_write16(DMA19_Y_COUNT, val)
+#define bfin_read_DMA19_Y_MODIFY()		bfin_read16(DMA19_Y_MODIFY)
+#define bfin_write_DMA19_Y_MODIFY(val) 		bfin_write16(DMA19_Y_MODIFY, val)
+#define bfin_read_DMA19_CURR_DESC_PTR() 	bfin_read32(DMA19_CURR_DESC_PTR)
+#define bfin_write_DMA19_CURR_DESC_PTR(val) 	bfin_write32(DMA19_CURR_DESC_PTR, val)
+#define bfin_read_DMA19_CURR_ADDR() 		bfin_read32(DMA19_CURR_ADDR)
+#define bfin_write_DMA19_CURR_ADDR(val) 	bfin_write32(DMA19_CURR_ADDR, val)
+#define bfin_read_DMA19_IRQ_STATUS()		bfin_read16(DMA19_IRQ_STATUS)
+#define bfin_write_DMA19_IRQ_STATUS(val)	bfin_write16(DMA19_IRQ_STATUS, val)
+#define bfin_read_DMA19_PERIPHERAL_MAP()	bfin_read16(DMA19_PERIPHERAL_MAP)
+#define bfin_write_DMA19_PERIPHERAL_MAP(val)	bfin_write16(DMA19_PERIPHERAL_MAP, val)
+#define bfin_read_DMA19_CURR_X_COUNT()		bfin_read16(DMA19_CURR_X_COUNT)
+#define bfin_write_DMA19_CURR_X_COUNT(val)	bfin_write16(DMA19_CURR_X_COUNT, val)
+#define bfin_read_DMA19_CURR_Y_COUNT()		bfin_read16(DMA19_CURR_Y_COUNT)
+#define bfin_write_DMA19_CURR_Y_COUNT(val)	bfin_write16(DMA19_CURR_Y_COUNT, val)
+
+/* DMA Channel 20 Registers */
+
+#define bfin_read_DMA20_NEXT_DESC_PTR() 	bfin_read32(DMA20_NEXT_DESC_PTR)
+#define bfin_write_DMA20_NEXT_DESC_PTR(val) 	bfin_write32(DMA20_NEXT_DESC_PTR, val)
+#define bfin_read_DMA20_START_ADDR() 		bfin_read32(DMA20_START_ADDR)
+#define bfin_write_DMA20_START_ADDR(val) 	bfin_write32(DMA20_START_ADDR, val)
+#define bfin_read_DMA20_CONFIG()		bfin_read16(DMA20_CONFIG)
+#define bfin_write_DMA20_CONFIG(val)		bfin_write16(DMA20_CONFIG, val)
+#define bfin_read_DMA20_X_COUNT()		bfin_read16(DMA20_X_COUNT)
+#define bfin_write_DMA20_X_COUNT(val)		bfin_write16(DMA20_X_COUNT, val)
+#define bfin_read_DMA20_X_MODIFY()		bfin_read16(DMA20_X_MODIFY)
+#define bfin_write_DMA20_X_MODIFY(val) 		bfin_write16(DMA20_X_MODIFY, val)
+#define bfin_read_DMA20_Y_COUNT()		bfin_read16(DMA20_Y_COUNT)
+#define bfin_write_DMA20_Y_COUNT(val)		bfin_write16(DMA20_Y_COUNT, val)
+#define bfin_read_DMA20_Y_MODIFY()		bfin_read16(DMA20_Y_MODIFY)
+#define bfin_write_DMA20_Y_MODIFY(val) 		bfin_write16(DMA20_Y_MODIFY, val)
+#define bfin_read_DMA20_CURR_DESC_PTR() 	bfin_read32(DMA20_CURR_DESC_PTR)
+#define bfin_write_DMA20_CURR_DESC_PTR(val) 	bfin_write32(DMA20_CURR_DESC_PTR, val)
+#define bfin_read_DMA20_CURR_ADDR() 		bfin_read32(DMA20_CURR_ADDR)
+#define bfin_write_DMA20_CURR_ADDR(val) 	bfin_write32(DMA20_CURR_ADDR, val)
+#define bfin_read_DMA20_IRQ_STATUS()		bfin_read16(DMA20_IRQ_STATUS)
+#define bfin_write_DMA20_IRQ_STATUS(val)	bfin_write16(DMA20_IRQ_STATUS, val)
+#define bfin_read_DMA20_PERIPHERAL_MAP()	bfin_read16(DMA20_PERIPHERAL_MAP)
+#define bfin_write_DMA20_PERIPHERAL_MAP(val)	bfin_write16(DMA20_PERIPHERAL_MAP, val)
+#define bfin_read_DMA20_CURR_X_COUNT()		bfin_read16(DMA20_CURR_X_COUNT)
+#define bfin_write_DMA20_CURR_X_COUNT(val)	bfin_write16(DMA20_CURR_X_COUNT, val)
+#define bfin_read_DMA20_CURR_Y_COUNT()		bfin_read16(DMA20_CURR_Y_COUNT)
+#define bfin_write_DMA20_CURR_Y_COUNT(val)	bfin_write16(DMA20_CURR_Y_COUNT, val)
+
+/* DMA Channel 21 Registers */
+
+#define bfin_read_DMA21_NEXT_DESC_PTR() 	bfin_read32(DMA21_NEXT_DESC_PTR)
+#define bfin_write_DMA21_NEXT_DESC_PTR(val) 	bfin_write32(DMA21_NEXT_DESC_PTR, val)
+#define bfin_read_DMA21_START_ADDR() 		bfin_read32(DMA21_START_ADDR)
+#define bfin_write_DMA21_START_ADDR(val) 	bfin_write32(DMA21_START_ADDR, val)
+#define bfin_read_DMA21_CONFIG()		bfin_read16(DMA21_CONFIG)
+#define bfin_write_DMA21_CONFIG(val)		bfin_write16(DMA21_CONFIG, val)
+#define bfin_read_DMA21_X_COUNT()		bfin_read16(DMA21_X_COUNT)
+#define bfin_write_DMA21_X_COUNT(val)		bfin_write16(DMA21_X_COUNT, val)
+#define bfin_read_DMA21_X_MODIFY()		bfin_read16(DMA21_X_MODIFY)
+#define bfin_write_DMA21_X_MODIFY(val) 		bfin_write16(DMA21_X_MODIFY, val)
+#define bfin_read_DMA21_Y_COUNT()		bfin_read16(DMA21_Y_COUNT)
+#define bfin_write_DMA21_Y_COUNT(val)		bfin_write16(DMA21_Y_COUNT, val)
+#define bfin_read_DMA21_Y_MODIFY()		bfin_read16(DMA21_Y_MODIFY)
+#define bfin_write_DMA21_Y_MODIFY(val) 		bfin_write16(DMA21_Y_MODIFY, val)
+#define bfin_read_DMA21_CURR_DESC_PTR() 	bfin_read32(DMA21_CURR_DESC_PTR)
+#define bfin_write_DMA21_CURR_DESC_PTR(val) 	bfin_write32(DMA21_CURR_DESC_PTR, val)
+#define bfin_read_DMA21_CURR_ADDR() 		bfin_read32(DMA21_CURR_ADDR)
+#define bfin_write_DMA21_CURR_ADDR(val) 	bfin_write32(DMA21_CURR_ADDR, val)
+#define bfin_read_DMA21_IRQ_STATUS()		bfin_read16(DMA21_IRQ_STATUS)
+#define bfin_write_DMA21_IRQ_STATUS(val)	bfin_write16(DMA21_IRQ_STATUS, val)
+#define bfin_read_DMA21_PERIPHERAL_MAP()	bfin_read16(DMA21_PERIPHERAL_MAP)
+#define bfin_write_DMA21_PERIPHERAL_MAP(val)	bfin_write16(DMA21_PERIPHERAL_MAP, val)
+#define bfin_read_DMA21_CURR_X_COUNT()		bfin_read16(DMA21_CURR_X_COUNT)
+#define bfin_write_DMA21_CURR_X_COUNT(val)	bfin_write16(DMA21_CURR_X_COUNT, val)
+#define bfin_read_DMA21_CURR_Y_COUNT()		bfin_read16(DMA21_CURR_Y_COUNT)
+#define bfin_write_DMA21_CURR_Y_COUNT(val)	bfin_write16(DMA21_CURR_Y_COUNT, val)
+
+/* DMA Channel 22 Registers */
+
+#define bfin_read_DMA22_NEXT_DESC_PTR() 	bfin_read32(DMA22_NEXT_DESC_PTR)
+#define bfin_write_DMA22_NEXT_DESC_PTR(val) 	bfin_write32(DMA22_NEXT_DESC_PTR, val)
+#define bfin_read_DMA22_START_ADDR() 		bfin_read32(DMA22_START_ADDR)
+#define bfin_write_DMA22_START_ADDR(val) 	bfin_write32(DMA22_START_ADDR, val)
+#define bfin_read_DMA22_CONFIG()		bfin_read16(DMA22_CONFIG)
+#define bfin_write_DMA22_CONFIG(val)		bfin_write16(DMA22_CONFIG, val)
+#define bfin_read_DMA22_X_COUNT()		bfin_read16(DMA22_X_COUNT)
+#define bfin_write_DMA22_X_COUNT(val)		bfin_write16(DMA22_X_COUNT, val)
+#define bfin_read_DMA22_X_MODIFY()		bfin_read16(DMA22_X_MODIFY)
+#define bfin_write_DMA22_X_MODIFY(val) 		bfin_write16(DMA22_X_MODIFY, val)
+#define bfin_read_DMA22_Y_COUNT()		bfin_read16(DMA22_Y_COUNT)
+#define bfin_write_DMA22_Y_COUNT(val)		bfin_write16(DMA22_Y_COUNT, val)
+#define bfin_read_DMA22_Y_MODIFY()		bfin_read16(DMA22_Y_MODIFY)
+#define bfin_write_DMA22_Y_MODIFY(val) 		bfin_write16(DMA22_Y_MODIFY, val)
+#define bfin_read_DMA22_CURR_DESC_PTR() 	bfin_read32(DMA22_CURR_DESC_PTR)
+#define bfin_write_DMA22_CURR_DESC_PTR(val) 	bfin_write32(DMA22_CURR_DESC_PTR, val)
+#define bfin_read_DMA22_CURR_ADDR() 		bfin_read32(DMA22_CURR_ADDR)
+#define bfin_write_DMA22_CURR_ADDR(val) 	bfin_write32(DMA22_CURR_ADDR, val)
+#define bfin_read_DMA22_IRQ_STATUS()		bfin_read16(DMA22_IRQ_STATUS)
+#define bfin_write_DMA22_IRQ_STATUS(val)	bfin_write16(DMA22_IRQ_STATUS, val)
+#define bfin_read_DMA22_PERIPHERAL_MAP()	bfin_read16(DMA22_PERIPHERAL_MAP)
+#define bfin_write_DMA22_PERIPHERAL_MAP(val)	bfin_write16(DMA22_PERIPHERAL_MAP, val)
+#define bfin_read_DMA22_CURR_X_COUNT()		bfin_read16(DMA22_CURR_X_COUNT)
+#define bfin_write_DMA22_CURR_X_COUNT(val)	bfin_write16(DMA22_CURR_X_COUNT, val)
+#define bfin_read_DMA22_CURR_Y_COUNT()		bfin_read16(DMA22_CURR_Y_COUNT)
+#define bfin_write_DMA22_CURR_Y_COUNT(val)	bfin_write16(DMA22_CURR_Y_COUNT, val)
+
+/* DMA Channel 23 Registers */
+
+#define bfin_read_DMA23_NEXT_DESC_PTR() 		bfin_read32(DMA23_NEXT_DESC_PTR)
+#define bfin_write_DMA23_NEXT_DESC_PTR(val) 		bfin_write32(DMA23_NEXT_DESC_PTR, val)
+#define bfin_read_DMA23_START_ADDR() 			bfin_read32(DMA23_START_ADDR)
+#define bfin_write_DMA23_START_ADDR(val) 		bfin_write32(DMA23_START_ADDR, val)
+#define bfin_read_DMA23_CONFIG()			bfin_read16(DMA23_CONFIG)
+#define bfin_write_DMA23_CONFIG(val)			bfin_write16(DMA23_CONFIG, val)
+#define bfin_read_DMA23_X_COUNT()			bfin_read16(DMA23_X_COUNT)
+#define bfin_write_DMA23_X_COUNT(val)			bfin_write16(DMA23_X_COUNT, val)
+#define bfin_read_DMA23_X_MODIFY()			bfin_read16(DMA23_X_MODIFY)
+#define bfin_write_DMA23_X_MODIFY(val) 			bfin_write16(DMA23_X_MODIFY, val)
+#define bfin_read_DMA23_Y_COUNT()			bfin_read16(DMA23_Y_COUNT)
+#define bfin_write_DMA23_Y_COUNT(val)			bfin_write16(DMA23_Y_COUNT, val)
+#define bfin_read_DMA23_Y_MODIFY()			bfin_read16(DMA23_Y_MODIFY)
+#define bfin_write_DMA23_Y_MODIFY(val) 			bfin_write16(DMA23_Y_MODIFY, val)
+#define bfin_read_DMA23_CURR_DESC_PTR() 		bfin_read32(DMA23_CURR_DESC_PTR)
+#define bfin_write_DMA23_CURR_DESC_PTR(val) 		bfin_write32(DMA23_CURR_DESC_PTR, val)
+#define bfin_read_DMA23_CURR_ADDR() 			bfin_read32(DMA23_CURR_ADDR)
+#define bfin_write_DMA23_CURR_ADDR(val) 		bfin_write32(DMA23_CURR_ADDR, val)
+#define bfin_read_DMA23_IRQ_STATUS()			bfin_read16(DMA23_IRQ_STATUS)
+#define bfin_write_DMA23_IRQ_STATUS(val)		bfin_write16(DMA23_IRQ_STATUS, val)
+#define bfin_read_DMA23_PERIPHERAL_MAP()		bfin_read16(DMA23_PERIPHERAL_MAP)
+#define bfin_write_DMA23_PERIPHERAL_MAP(val)		bfin_write16(DMA23_PERIPHERAL_MAP, val)
+#define bfin_read_DMA23_CURR_X_COUNT()			bfin_read16(DMA23_CURR_X_COUNT)
+#define bfin_write_DMA23_CURR_X_COUNT(val)		bfin_write16(DMA23_CURR_X_COUNT, val)
+#define bfin_read_DMA23_CURR_Y_COUNT()			bfin_read16(DMA23_CURR_Y_COUNT)
+#define bfin_write_DMA23_CURR_Y_COUNT(val)		bfin_write16(DMA23_CURR_Y_COUNT, val)
+
+/* MDMA Stream 2 Registers */
+
+#define bfin_read_MDMA_D2_NEXT_DESC_PTR() 		bfin_read32(MDMA_D2_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) 		bfin_write32(MDMA_D2_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D2_START_ADDR() 			bfin_read32(MDMA_D2_START_ADDR)
+#define bfin_write_MDMA_D2_START_ADDR(val) 		bfin_write32(MDMA_D2_START_ADDR, val)
+#define bfin_read_MDMA_D2_CONFIG()			bfin_read16(MDMA_D2_CONFIG)
+#define bfin_write_MDMA_D2_CONFIG(val)			bfin_write16(MDMA_D2_CONFIG, val)
+#define bfin_read_MDMA_D2_X_COUNT()			bfin_read16(MDMA_D2_X_COUNT)
+#define bfin_write_MDMA_D2_X_COUNT(val)			bfin_write16(MDMA_D2_X_COUNT, val)
+#define bfin_read_MDMA_D2_X_MODIFY()			bfin_read16(MDMA_D2_X_MODIFY)
+#define bfin_write_MDMA_D2_X_MODIFY(val) 		bfin_write16(MDMA_D2_X_MODIFY, val)
+#define bfin_read_MDMA_D2_Y_COUNT()			bfin_read16(MDMA_D2_Y_COUNT)
+#define bfin_write_MDMA_D2_Y_COUNT(val)			bfin_write16(MDMA_D2_Y_COUNT, val)
+#define bfin_read_MDMA_D2_Y_MODIFY()			bfin_read16(MDMA_D2_Y_MODIFY)
+#define bfin_write_MDMA_D2_Y_MODIFY(val) 		bfin_write16(MDMA_D2_Y_MODIFY, val)
+#define bfin_read_MDMA_D2_CURR_DESC_PTR() 		bfin_read32(MDMA_D2_CURR_DESC_PTR)
+#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) 		bfin_write32(MDMA_D2_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D2_CURR_ADDR() 			bfin_read32(MDMA_D2_CURR_ADDR)
+#define bfin_write_MDMA_D2_CURR_ADDR(val) 		bfin_write32(MDMA_D2_CURR_ADDR, val)
+#define bfin_read_MDMA_D2_IRQ_STATUS()			bfin_read16(MDMA_D2_IRQ_STATUS)
+#define bfin_write_MDMA_D2_IRQ_STATUS(val)		bfin_write16(MDMA_D2_IRQ_STATUS, val)
+#define bfin_read_MDMA_D2_PERIPHERAL_MAP()		bfin_read16(MDMA_D2_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D2_PERIPHERAL_MAP(val)		bfin_write16(MDMA_D2_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D2_CURR_X_COUNT()		bfin_read16(MDMA_D2_CURR_X_COUNT)
+#define bfin_write_MDMA_D2_CURR_X_COUNT(val)		bfin_write16(MDMA_D2_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D2_CURR_Y_COUNT()		bfin_read16(MDMA_D2_CURR_Y_COUNT)
+#define bfin_write_MDMA_D2_CURR_Y_COUNT(val)		bfin_write16(MDMA_D2_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S2_NEXT_DESC_PTR() 		bfin_read32(MDMA_S2_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) 		bfin_write32(MDMA_S2_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S2_START_ADDR() 			bfin_read32(MDMA_S2_START_ADDR)
+#define bfin_write_MDMA_S2_START_ADDR(val) 		bfin_write32(MDMA_S2_START_ADDR, val)
+#define bfin_read_MDMA_S2_CONFIG()			bfin_read16(MDMA_S2_CONFIG)
+#define bfin_write_MDMA_S2_CONFIG(val)			bfin_write16(MDMA_S2_CONFIG, val)
+#define bfin_read_MDMA_S2_X_COUNT()			bfin_read16(MDMA_S2_X_COUNT)
+#define bfin_write_MDMA_S2_X_COUNT(val)			bfin_write16(MDMA_S2_X_COUNT, val)
+#define bfin_read_MDMA_S2_X_MODIFY()			bfin_read16(MDMA_S2_X_MODIFY)
+#define bfin_write_MDMA_S2_X_MODIFY(val) 		bfin_write16(MDMA_S2_X_MODIFY, val)
+#define bfin_read_MDMA_S2_Y_COUNT()			bfin_read16(MDMA_S2_Y_COUNT)
+#define bfin_write_MDMA_S2_Y_COUNT(val)			bfin_write16(MDMA_S2_Y_COUNT, val)
+#define bfin_read_MDMA_S2_Y_MODIFY()			bfin_read16(MDMA_S2_Y_MODIFY)
+#define bfin_write_MDMA_S2_Y_MODIFY(val) 		bfin_write16(MDMA_S2_Y_MODIFY, val)
+#define bfin_read_MDMA_S2_CURR_DESC_PTR() 		bfin_read32(MDMA_S2_CURR_DESC_PTR)
+#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) 		bfin_write32(MDMA_S2_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S2_CURR_ADDR() 			bfin_read32(MDMA_S2_CURR_ADDR)
+#define bfin_write_MDMA_S2_CURR_ADDR(val) 		bfin_write32(MDMA_S2_CURR_ADDR, val)
+#define bfin_read_MDMA_S2_IRQ_STATUS()			bfin_read16(MDMA_S2_IRQ_STATUS)
+#define bfin_write_MDMA_S2_IRQ_STATUS(val)		bfin_write16(MDMA_S2_IRQ_STATUS, val)
+#define bfin_read_MDMA_S2_PERIPHERAL_MAP()		bfin_read16(MDMA_S2_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S2_PERIPHERAL_MAP(val)		bfin_write16(MDMA_S2_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S2_CURR_X_COUNT()		bfin_read16(MDMA_S2_CURR_X_COUNT)
+#define bfin_write_MDMA_S2_CURR_X_COUNT(val)		bfin_write16(MDMA_S2_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S2_CURR_Y_COUNT()		bfin_read16(MDMA_S2_CURR_Y_COUNT)
+#define bfin_write_MDMA_S2_CURR_Y_COUNT(val)		bfin_write16(MDMA_S2_CURR_Y_COUNT, val)
+
+/* MDMA Stream 3 Registers */
+
+#define bfin_read_MDMA_D3_NEXT_DESC_PTR() 		bfin_read32(MDMA_D3_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) 		bfin_write32(MDMA_D3_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D3_START_ADDR() 			bfin_read32(MDMA_D3_START_ADDR)
+#define bfin_write_MDMA_D3_START_ADDR(val) 		bfin_write32(MDMA_D3_START_ADDR, val)
+#define bfin_read_MDMA_D3_CONFIG()			bfin_read16(MDMA_D3_CONFIG)
+#define bfin_write_MDMA_D3_CONFIG(val)			bfin_write16(MDMA_D3_CONFIG, val)
+#define bfin_read_MDMA_D3_X_COUNT()			bfin_read16(MDMA_D3_X_COUNT)
+#define bfin_write_MDMA_D3_X_COUNT(val)			bfin_write16(MDMA_D3_X_COUNT, val)
+#define bfin_read_MDMA_D3_X_MODIFY()			bfin_read16(MDMA_D3_X_MODIFY)
+#define bfin_write_MDMA_D3_X_MODIFY(val) 		bfin_write16(MDMA_D3_X_MODIFY, val)
+#define bfin_read_MDMA_D3_Y_COUNT()			bfin_read16(MDMA_D3_Y_COUNT)
+#define bfin_write_MDMA_D3_Y_COUNT(val)			bfin_write16(MDMA_D3_Y_COUNT, val)
+#define bfin_read_MDMA_D3_Y_MODIFY()			bfin_read16(MDMA_D3_Y_MODIFY)
+#define bfin_write_MDMA_D3_Y_MODIFY(val) 		bfin_write16(MDMA_D3_Y_MODIFY, val)
+#define bfin_read_MDMA_D3_CURR_DESC_PTR() 		bfin_read32(MDMA_D3_CURR_DESC_PTR)
+#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) 		bfin_write32(MDMA_D3_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D3_CURR_ADDR() 			bfin_read32(MDMA_D3_CURR_ADDR)
+#define bfin_write_MDMA_D3_CURR_ADDR(val) 		bfin_write32(MDMA_D3_CURR_ADDR, val)
+#define bfin_read_MDMA_D3_IRQ_STATUS()			bfin_read16(MDMA_D3_IRQ_STATUS)
+#define bfin_write_MDMA_D3_IRQ_STATUS(val)		bfin_write16(MDMA_D3_IRQ_STATUS, val)
+#define bfin_read_MDMA_D3_PERIPHERAL_MAP()		bfin_read16(MDMA_D3_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D3_PERIPHERAL_MAP(val)		bfin_write16(MDMA_D3_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_D3_CURR_X_COUNT()		bfin_read16(MDMA_D3_CURR_X_COUNT)
+#define bfin_write_MDMA_D3_CURR_X_COUNT(val)		bfin_write16(MDMA_D3_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D3_CURR_Y_COUNT()		bfin_read16(MDMA_D3_CURR_Y_COUNT)
+#define bfin_write_MDMA_D3_CURR_Y_COUNT(val)		bfin_write16(MDMA_D3_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S3_NEXT_DESC_PTR() 		bfin_read32(MDMA_S3_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) 		bfin_write32(MDMA_S3_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S3_START_ADDR() 			bfin_read32(MDMA_S3_START_ADDR)
+#define bfin_write_MDMA_S3_START_ADDR(val) 		bfin_write32(MDMA_S3_START_ADDR, val)
+#define bfin_read_MDMA_S3_CONFIG()			bfin_read16(MDMA_S3_CONFIG)
+#define bfin_write_MDMA_S3_CONFIG(val)			bfin_write16(MDMA_S3_CONFIG, val)
+#define bfin_read_MDMA_S3_X_COUNT()			bfin_read16(MDMA_S3_X_COUNT)
+#define bfin_write_MDMA_S3_X_COUNT(val)			bfin_write16(MDMA_S3_X_COUNT, val)
+#define bfin_read_MDMA_S3_X_MODIFY()			bfin_read16(MDMA_S3_X_MODIFY)
+#define bfin_write_MDMA_S3_X_MODIFY(val) 		bfin_write16(MDMA_S3_X_MODIFY, val)
+#define bfin_read_MDMA_S3_Y_COUNT()			bfin_read16(MDMA_S3_Y_COUNT)
+#define bfin_write_MDMA_S3_Y_COUNT(val)			bfin_write16(MDMA_S3_Y_COUNT, val)
+#define bfin_read_MDMA_S3_Y_MODIFY()			bfin_read16(MDMA_S3_Y_MODIFY)
+#define bfin_write_MDMA_S3_Y_MODIFY(val) 		bfin_write16(MDMA_S3_Y_MODIFY, val)
+#define bfin_read_MDMA_S3_CURR_DESC_PTR() 		bfin_read32(MDMA_S3_CURR_DESC_PTR)
+#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) 		bfin_write32(MDMA_S3_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S3_CURR_ADDR() 			bfin_read32(MDMA_S3_CURR_ADDR)
+#define bfin_write_MDMA_S3_CURR_ADDR(val) 		bfin_write32(MDMA_S3_CURR_ADDR, val)
+#define bfin_read_MDMA_S3_IRQ_STATUS()			bfin_read16(MDMA_S3_IRQ_STATUS)
+#define bfin_write_MDMA_S3_IRQ_STATUS(val)		bfin_write16(MDMA_S3_IRQ_STATUS, val)
+#define bfin_read_MDMA_S3_PERIPHERAL_MAP()		bfin_read16(MDMA_S3_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S3_PERIPHERAL_MAP(val)		bfin_write16(MDMA_S3_PERIPHERAL_MAP, val)
+#define bfin_read_MDMA_S3_CURR_X_COUNT()		bfin_read16(MDMA_S3_CURR_X_COUNT)
+#define bfin_write_MDMA_S3_CURR_X_COUNT(val)		bfin_write16(MDMA_S3_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S3_CURR_Y_COUNT()		bfin_read16(MDMA_S3_CURR_Y_COUNT)
+#define bfin_write_MDMA_S3_CURR_Y_COUNT(val)		bfin_write16(MDMA_S3_CURR_Y_COUNT, val)
+
+/* UART1 Registers */
+
+#define bfin_read_UART1_DLL()			bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val)		bfin_write16(UART1_DLL, val)
+#define bfin_read_UART1_DLH()			bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val)		bfin_write16(UART1_DLH, val)
+#define bfin_read_UART1_GCTL()			bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val)		bfin_write16(UART1_GCTL, val)
+#define bfin_read_UART1_LCR()			bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val)		bfin_write16(UART1_LCR, val)
+#define bfin_read_UART1_MCR()			bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val)		bfin_write16(UART1_MCR, val)
+#define bfin_read_UART1_LSR()			bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val)		bfin_write16(UART1_LSR, val)
+#define bfin_read_UART1_MSR()			bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val)		bfin_write16(UART1_MSR, val)
+#define bfin_read_UART1_SCR()			bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val)		bfin_write16(UART1_SCR, val)
+#define bfin_read_UART1_IER_SET()		bfin_read16(UART1_IER_SET)
+#define bfin_write_UART1_IER_SET(val)		bfin_write16(UART1_IER_SET, val)
+#define bfin_read_UART1_IER_CLEAR()		bfin_read16(UART1_IER_CLEAR)
+#define bfin_write_UART1_IER_CLEAR(val)		bfin_write16(UART1_IER_CLEAR, val)
+#define bfin_read_UART1_THR()			bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val)		bfin_write16(UART1_THR, val)
+#define bfin_read_UART1_RBR()			bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val)		bfin_write16(UART1_RBR, val)
+
+/* UART2 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */
+
+/* SPI1 Registers */
+
+#define bfin_read_SPI1_CTL()			bfin_read16(SPI1_CTL)
+#define bfin_write_SPI1_CTL(val)		bfin_write16(SPI1_CTL, val)
+#define bfin_read_SPI1_FLG()			bfin_read16(SPI1_FLG)
+#define bfin_write_SPI1_FLG(val)		bfin_write16(SPI1_FLG, val)
+#define bfin_read_SPI1_STAT()			bfin_read16(SPI1_STAT)
+#define bfin_write_SPI1_STAT(val)		bfin_write16(SPI1_STAT, val)
+#define bfin_read_SPI1_TDBR()			bfin_read16(SPI1_TDBR)
+#define bfin_write_SPI1_TDBR(val)		bfin_write16(SPI1_TDBR, val)
+#define bfin_read_SPI1_RDBR()			bfin_read16(SPI1_RDBR)
+#define bfin_write_SPI1_RDBR(val)		bfin_write16(SPI1_RDBR, val)
+#define bfin_read_SPI1_BAUD()			bfin_read16(SPI1_BAUD)
+#define bfin_write_SPI1_BAUD(val)		bfin_write16(SPI1_BAUD, val)
+#define bfin_read_SPI1_SHADOW()			bfin_read16(SPI1_SHADOW)
+#define bfin_write_SPI1_SHADOW(val)		bfin_write16(SPI1_SHADOW, val)
+
+/* SPORT2 Registers */
+
+#define bfin_read_SPORT2_TCR1()			bfin_read16(SPORT2_TCR1)
+#define bfin_write_SPORT2_TCR1(val)		bfin_write16(SPORT2_TCR1, val)
+#define bfin_read_SPORT2_TCR2()			bfin_read16(SPORT2_TCR2)
+#define bfin_write_SPORT2_TCR2(val)		bfin_write16(SPORT2_TCR2, val)
+#define bfin_read_SPORT2_TCLKDIV()		bfin_read16(SPORT2_TCLKDIV)
+#define bfin_write_SPORT2_TCLKDIV(val)		bfin_write16(SPORT2_TCLKDIV, val)
+#define bfin_read_SPORT2_TFSDIV()		bfin_read16(SPORT2_TFSDIV)
+#define bfin_write_SPORT2_TFSDIV(val)		bfin_write16(SPORT2_TFSDIV, val)
+#define bfin_read_SPORT2_TX()			bfin_read32(SPORT2_TX)
+#define bfin_write_SPORT2_TX(val)		bfin_write32(SPORT2_TX, val)
+#define bfin_read_SPORT2_RX()			bfin_read32(SPORT2_RX)
+#define bfin_write_SPORT2_RX(val)		bfin_write32(SPORT2_RX, val)
+#define bfin_read_SPORT2_RCR1()			bfin_read16(SPORT2_RCR1)
+#define bfin_write_SPORT2_RCR1(val)		bfin_write16(SPORT2_RCR1, val)
+#define bfin_read_SPORT2_RCR2()			bfin_read16(SPORT2_RCR2)
+#define bfin_write_SPORT2_RCR2(val)		bfin_write16(SPORT2_RCR2, val)
+#define bfin_read_SPORT2_RCLKDIV()		bfin_read16(SPORT2_RCLKDIV)
+#define bfin_write_SPORT2_RCLKDIV(val)		bfin_write16(SPORT2_RCLKDIV, val)
+#define bfin_read_SPORT2_RFSDIV()		bfin_read16(SPORT2_RFSDIV)
+#define bfin_write_SPORT2_RFSDIV(val)		bfin_write16(SPORT2_RFSDIV, val)
+#define bfin_read_SPORT2_STAT()			bfin_read16(SPORT2_STAT)
+#define bfin_write_SPORT2_STAT(val)		bfin_write16(SPORT2_STAT, val)
+#define bfin_read_SPORT2_CHNL()			bfin_read16(SPORT2_CHNL)
+#define bfin_write_SPORT2_CHNL(val)		bfin_write16(SPORT2_CHNL, val)
+#define bfin_read_SPORT2_MCMC1()		bfin_read16(SPORT2_MCMC1)
+#define bfin_write_SPORT2_MCMC1(val)		bfin_write16(SPORT2_MCMC1, val)
+#define bfin_read_SPORT2_MCMC2()		bfin_read16(SPORT2_MCMC2)
+#define bfin_write_SPORT2_MCMC2(val)		bfin_write16(SPORT2_MCMC2, val)
+#define bfin_read_SPORT2_MTCS0()		bfin_read32(SPORT2_MTCS0)
+#define bfin_write_SPORT2_MTCS0(val)		bfin_write32(SPORT2_MTCS0, val)
+#define bfin_read_SPORT2_MTCS1()		bfin_read32(SPORT2_MTCS1)
+#define bfin_write_SPORT2_MTCS1(val)		bfin_write32(SPORT2_MTCS1, val)
+#define bfin_read_SPORT2_MTCS2()		bfin_read32(SPORT2_MTCS2)
+#define bfin_write_SPORT2_MTCS2(val)		bfin_write32(SPORT2_MTCS2, val)
+#define bfin_read_SPORT2_MTCS3()		bfin_read32(SPORT2_MTCS3)
+#define bfin_write_SPORT2_MTCS3(val)		bfin_write32(SPORT2_MTCS3, val)
+#define bfin_read_SPORT2_MRCS0()		bfin_read32(SPORT2_MRCS0)
+#define bfin_write_SPORT2_MRCS0(val)		bfin_write32(SPORT2_MRCS0, val)
+#define bfin_read_SPORT2_MRCS1()		bfin_read32(SPORT2_MRCS1)
+#define bfin_write_SPORT2_MRCS1(val)		bfin_write32(SPORT2_MRCS1, val)
+#define bfin_read_SPORT2_MRCS2()		bfin_read32(SPORT2_MRCS2)
+#define bfin_write_SPORT2_MRCS2(val)		bfin_write32(SPORT2_MRCS2, val)
+#define bfin_read_SPORT2_MRCS3()		bfin_read32(SPORT2_MRCS3)
+#define bfin_write_SPORT2_MRCS3(val)		bfin_write32(SPORT2_MRCS3, val)
+
+/* SPORT3 Registers */
+
+#define bfin_read_SPORT3_TCR1()			bfin_read16(SPORT3_TCR1)
+#define bfin_write_SPORT3_TCR1(val)		bfin_write16(SPORT3_TCR1, val)
+#define bfin_read_SPORT3_TCR2()			bfin_read16(SPORT3_TCR2)
+#define bfin_write_SPORT3_TCR2(val)		bfin_write16(SPORT3_TCR2, val)
+#define bfin_read_SPORT3_TCLKDIV()		bfin_read16(SPORT3_TCLKDIV)
+#define bfin_write_SPORT3_TCLKDIV(val)		bfin_write16(SPORT3_TCLKDIV, val)
+#define bfin_read_SPORT3_TFSDIV()		bfin_read16(SPORT3_TFSDIV)
+#define bfin_write_SPORT3_TFSDIV(val)		bfin_write16(SPORT3_TFSDIV, val)
+#define bfin_read_SPORT3_TX()			bfin_read32(SPORT3_TX)
+#define bfin_write_SPORT3_TX(val)		bfin_write32(SPORT3_TX, val)
+#define bfin_read_SPORT3_RX()			bfin_read32(SPORT3_RX)
+#define bfin_write_SPORT3_RX(val)		bfin_write32(SPORT3_RX, val)
+#define bfin_read_SPORT3_RCR1()			bfin_read16(SPORT3_RCR1)
+#define bfin_write_SPORT3_RCR1(val)		bfin_write16(SPORT3_RCR1, val)
+#define bfin_read_SPORT3_RCR2()			bfin_read16(SPORT3_RCR2)
+#define bfin_write_SPORT3_RCR2(val)		bfin_write16(SPORT3_RCR2, val)
+#define bfin_read_SPORT3_RCLKDIV()		bfin_read16(SPORT3_RCLKDIV)
+#define bfin_write_SPORT3_RCLKDIV(val)		bfin_write16(SPORT3_RCLKDIV, val)
+#define bfin_read_SPORT3_RFSDIV()		bfin_read16(SPORT3_RFSDIV)
+#define bfin_write_SPORT3_RFSDIV(val)		bfin_write16(SPORT3_RFSDIV, val)
+#define bfin_read_SPORT3_STAT()			bfin_read16(SPORT3_STAT)
+#define bfin_write_SPORT3_STAT(val)		bfin_write16(SPORT3_STAT, val)
+#define bfin_read_SPORT3_CHNL()			bfin_read16(SPORT3_CHNL)
+#define bfin_write_SPORT3_CHNL(val)		bfin_write16(SPORT3_CHNL, val)
+#define bfin_read_SPORT3_MCMC1()		bfin_read16(SPORT3_MCMC1)
+#define bfin_write_SPORT3_MCMC1(val)		bfin_write16(SPORT3_MCMC1, val)
+#define bfin_read_SPORT3_MCMC2()		bfin_read16(SPORT3_MCMC2)
+#define bfin_write_SPORT3_MCMC2(val)		bfin_write16(SPORT3_MCMC2, val)
+#define bfin_read_SPORT3_MTCS0()		bfin_read32(SPORT3_MTCS0)
+#define bfin_write_SPORT3_MTCS0(val)		bfin_write32(SPORT3_MTCS0, val)
+#define bfin_read_SPORT3_MTCS1()		bfin_read32(SPORT3_MTCS1)
+#define bfin_write_SPORT3_MTCS1(val)		bfin_write32(SPORT3_MTCS1, val)
+#define bfin_read_SPORT3_MTCS2()		bfin_read32(SPORT3_MTCS2)
+#define bfin_write_SPORT3_MTCS2(val)		bfin_write32(SPORT3_MTCS2, val)
+#define bfin_read_SPORT3_MTCS3()		bfin_read32(SPORT3_MTCS3)
+#define bfin_write_SPORT3_MTCS3(val)		bfin_write32(SPORT3_MTCS3, val)
+#define bfin_read_SPORT3_MRCS0()		bfin_read32(SPORT3_MRCS0)
+#define bfin_write_SPORT3_MRCS0(val)		bfin_write32(SPORT3_MRCS0, val)
+#define bfin_read_SPORT3_MRCS1()		bfin_read32(SPORT3_MRCS1)
+#define bfin_write_SPORT3_MRCS1(val)		bfin_write32(SPORT3_MRCS1, val)
+#define bfin_read_SPORT3_MRCS2()		bfin_read32(SPORT3_MRCS2)
+#define bfin_write_SPORT3_MRCS2(val)		bfin_write32(SPORT3_MRCS2, val)
+#define bfin_read_SPORT3_MRCS3()		bfin_read32(SPORT3_MRCS3)
+#define bfin_write_SPORT3_MRCS3(val)		bfin_write32(SPORT3_MRCS3, val)
+
+/* EPPI2 Registers */
+
+#define bfin_read_EPPI2_STATUS()		bfin_read16(EPPI2_STATUS)
+#define bfin_write_EPPI2_STATUS(val)		bfin_write16(EPPI2_STATUS, val)
+#define bfin_read_EPPI2_HCOUNT()		bfin_read16(EPPI2_HCOUNT)
+#define bfin_write_EPPI2_HCOUNT(val)		bfin_write16(EPPI2_HCOUNT, val)
+#define bfin_read_EPPI2_HDELAY()		bfin_read16(EPPI2_HDELAY)
+#define bfin_write_EPPI2_HDELAY(val)		bfin_write16(EPPI2_HDELAY, val)
+#define bfin_read_EPPI2_VCOUNT()		bfin_read16(EPPI2_VCOUNT)
+#define bfin_write_EPPI2_VCOUNT(val)		bfin_write16(EPPI2_VCOUNT, val)
+#define bfin_read_EPPI2_VDELAY()		bfin_read16(EPPI2_VDELAY)
+#define bfin_write_EPPI2_VDELAY(val)		bfin_write16(EPPI2_VDELAY, val)
+#define bfin_read_EPPI2_FRAME()			bfin_read16(EPPI2_FRAME)
+#define bfin_write_EPPI2_FRAME(val)		bfin_write16(EPPI2_FRAME, val)
+#define bfin_read_EPPI2_LINE()			bfin_read16(EPPI2_LINE)
+#define bfin_write_EPPI2_LINE(val)		bfin_write16(EPPI2_LINE, val)
+#define bfin_read_EPPI2_CLKDIV()		bfin_read16(EPPI2_CLKDIV)
+#define bfin_write_EPPI2_CLKDIV(val)		bfin_write16(EPPI2_CLKDIV, val)
+#define bfin_read_EPPI2_CONTROL()		bfin_read32(EPPI2_CONTROL)
+#define bfin_write_EPPI2_CONTROL(val)		bfin_write32(EPPI2_CONTROL, val)
+#define bfin_read_EPPI2_FS1W_HBL()		bfin_read32(EPPI2_FS1W_HBL)
+#define bfin_write_EPPI2_FS1W_HBL(val)		bfin_write32(EPPI2_FS1W_HBL, val)
+#define bfin_read_EPPI2_FS1P_AVPL()		bfin_read32(EPPI2_FS1P_AVPL)
+#define bfin_write_EPPI2_FS1P_AVPL(val)		bfin_write32(EPPI2_FS1P_AVPL, val)
+#define bfin_read_EPPI2_FS2W_LVB()		bfin_read32(EPPI2_FS2W_LVB)
+#define bfin_write_EPPI2_FS2W_LVB(val)		bfin_write32(EPPI2_FS2W_LVB, val)
+#define bfin_read_EPPI2_FS2P_LAVF()		bfin_read32(EPPI2_FS2P_LAVF)
+#define bfin_write_EPPI2_FS2P_LAVF(val)		bfin_write32(EPPI2_FS2P_LAVF, val)
+#define bfin_read_EPPI2_CLIP()			bfin_read32(EPPI2_CLIP)
+#define bfin_write_EPPI2_CLIP(val)		bfin_write32(EPPI2_CLIP, val)
+
+/* CAN Controller 0 Config 1 Registers */
+
+#define bfin_read_CAN0_MC1()		bfin_read16(CAN0_MC1)
+#define bfin_write_CAN0_MC1(val)	bfin_write16(CAN0_MC1, val)
+#define bfin_read_CAN0_MD1()		bfin_read16(CAN0_MD1)
+#define bfin_write_CAN0_MD1(val)	bfin_write16(CAN0_MD1, val)
+#define bfin_read_CAN0_TRS1()		bfin_read16(CAN0_TRS1)
+#define bfin_write_CAN0_TRS1(val)	bfin_write16(CAN0_TRS1, val)
+#define bfin_read_CAN0_TRR1()		bfin_read16(CAN0_TRR1)
+#define bfin_write_CAN0_TRR1(val)	bfin_write16(CAN0_TRR1, val)
+#define bfin_read_CAN0_TA1()		bfin_read16(CAN0_TA1)
+#define bfin_write_CAN0_TA1(val)	bfin_write16(CAN0_TA1, val)
+#define bfin_read_CAN0_AA1()		bfin_read16(CAN0_AA1)
+#define bfin_write_CAN0_AA1(val)	bfin_write16(CAN0_AA1, val)
+#define bfin_read_CAN0_RMP1()		bfin_read16(CAN0_RMP1)
+#define bfin_write_CAN0_RMP1(val)	bfin_write16(CAN0_RMP1, val)
+#define bfin_read_CAN0_RML1()		bfin_read16(CAN0_RML1)
+#define bfin_write_CAN0_RML1(val)	bfin_write16(CAN0_RML1, val)
+#define bfin_read_CAN0_MBTIF1()		bfin_read16(CAN0_MBTIF1)
+#define bfin_write_CAN0_MBTIF1(val)	bfin_write16(CAN0_MBTIF1, val)
+#define bfin_read_CAN0_MBRIF1()		bfin_read16(CAN0_MBRIF1)
+#define bfin_write_CAN0_MBRIF1(val)	bfin_write16(CAN0_MBRIF1, val)
+#define bfin_read_CAN0_MBIM1()		bfin_read16(CAN0_MBIM1)
+#define bfin_write_CAN0_MBIM1(val)	bfin_write16(CAN0_MBIM1, val)
+#define bfin_read_CAN0_RFH1()		bfin_read16(CAN0_RFH1)
+#define bfin_write_CAN0_RFH1(val)	bfin_write16(CAN0_RFH1, val)
+#define bfin_read_CAN0_OPSS1()		bfin_read16(CAN0_OPSS1)
+#define bfin_write_CAN0_OPSS1(val)	bfin_write16(CAN0_OPSS1, val)
+
+/* CAN Controller 0 Config 2 Registers */
+
+#define bfin_read_CAN0_MC2()		bfin_read16(CAN0_MC2)
+#define bfin_write_CAN0_MC2(val)	bfin_write16(CAN0_MC2, val)
+#define bfin_read_CAN0_MD2()		bfin_read16(CAN0_MD2)
+#define bfin_write_CAN0_MD2(val)	bfin_write16(CAN0_MD2, val)
+#define bfin_read_CAN0_TRS2()		bfin_read16(CAN0_TRS2)
+#define bfin_write_CAN0_TRS2(val)	bfin_write16(CAN0_TRS2, val)
+#define bfin_read_CAN0_TRR2()		bfin_read16(CAN0_TRR2)
+#define bfin_write_CAN0_TRR2(val)	bfin_write16(CAN0_TRR2, val)
+#define bfin_read_CAN0_TA2()		bfin_read16(CAN0_TA2)
+#define bfin_write_CAN0_TA2(val)	bfin_write16(CAN0_TA2, val)
+#define bfin_read_CAN0_AA2()		bfin_read16(CAN0_AA2)
+#define bfin_write_CAN0_AA2(val)	bfin_write16(CAN0_AA2, val)
+#define bfin_read_CAN0_RMP2()		bfin_read16(CAN0_RMP2)
+#define bfin_write_CAN0_RMP2(val)	bfin_write16(CAN0_RMP2, val)
+#define bfin_read_CAN0_RML2()		bfin_read16(CAN0_RML2)
+#define bfin_write_CAN0_RML2(val)	bfin_write16(CAN0_RML2, val)
+#define bfin_read_CAN0_MBTIF2()		bfin_read16(CAN0_MBTIF2)
+#define bfin_write_CAN0_MBTIF2(val)	bfin_write16(CAN0_MBTIF2, val)
+#define bfin_read_CAN0_MBRIF2()		bfin_read16(CAN0_MBRIF2)
+#define bfin_write_CAN0_MBRIF2(val)	bfin_write16(CAN0_MBRIF2, val)
+#define bfin_read_CAN0_MBIM2()		bfin_read16(CAN0_MBIM2)
+#define bfin_write_CAN0_MBIM2(val)	bfin_write16(CAN0_MBIM2, val)
+#define bfin_read_CAN0_RFH2()		bfin_read16(CAN0_RFH2)
+#define bfin_write_CAN0_RFH2(val)	bfin_write16(CAN0_RFH2, val)
+#define bfin_read_CAN0_OPSS2()		bfin_read16(CAN0_OPSS2)
+#define bfin_write_CAN0_OPSS2(val)	bfin_write16(CAN0_OPSS2, val)
+
+/* CAN Controller 0 Clock/Interrubfin_read_()t/Counter Registers */
+
+#define bfin_read_CAN0_CLOCK()		bfin_read16(CAN0_CLOCK)
+#define bfin_write_CAN0_CLOCK(val)	bfin_write16(CAN0_CLOCK, val)
+#define bfin_read_CAN0_TIMING()		bfin_read16(CAN0_TIMING)
+#define bfin_write_CAN0_TIMING(val)	bfin_write16(CAN0_TIMING, val)
+#define bfin_read_CAN0_DEBUG()		bfin_read16(CAN0_DEBUG)
+#define bfin_write_CAN0_DEBUG(val)	bfin_write16(CAN0_DEBUG, val)
+#define bfin_read_CAN0_STATUS()		bfin_read16(CAN0_STATUS)
+#define bfin_write_CAN0_STATUS(val)	bfin_write16(CAN0_STATUS, val)
+#define bfin_read_CAN0_CEC()		bfin_read16(CAN0_CEC)
+#define bfin_write_CAN0_CEC(val)	bfin_write16(CAN0_CEC, val)
+#define bfin_read_CAN0_GIS()		bfin_read16(CAN0_GIS)
+#define bfin_write_CAN0_GIS(val)	bfin_write16(CAN0_GIS, val)
+#define bfin_read_CAN0_GIM()		bfin_read16(CAN0_GIM)
+#define bfin_write_CAN0_GIM(val)	bfin_write16(CAN0_GIM, val)
+#define bfin_read_CAN0_GIF()		bfin_read16(CAN0_GIF)
+#define bfin_write_CAN0_GIF(val)	bfin_write16(CAN0_GIF, val)
+#define bfin_read_CAN0_CONTROL()	bfin_read16(CAN0_CONTROL)
+#define bfin_write_CAN0_CONTROL(val)	bfin_write16(CAN0_CONTROL, val)
+#define bfin_read_CAN0_INTR()		bfin_read16(CAN0_INTR)
+#define bfin_write_CAN0_INTR(val)	bfin_write16(CAN0_INTR, val)
+#define bfin_read_CAN0_MBTD()		bfin_read16(CAN0_MBTD)
+#define bfin_write_CAN0_MBTD(val)	bfin_write16(CAN0_MBTD, val)
+#define bfin_read_CAN0_EWR()		bfin_read16(CAN0_EWR)
+#define bfin_write_CAN0_EWR(val)	bfin_write16(CAN0_EWR, val)
+#define bfin_read_CAN0_ESR()		bfin_read16(CAN0_ESR)
+#define bfin_write_CAN0_ESR(val)	bfin_write16(CAN0_ESR, val)
+#define bfin_read_CAN0_UCCNT()		bfin_read16(CAN0_UCCNT)
+#define bfin_write_CAN0_UCCNT(val)	bfin_write16(CAN0_UCCNT, val)
+#define bfin_read_CAN0_UCRC()		bfin_read16(CAN0_UCRC)
+#define bfin_write_CAN0_UCRC(val)	bfin_write16(CAN0_UCRC, val)
+#define bfin_read_CAN0_UCCNF()		bfin_read16(CAN0_UCCNF)
+#define bfin_write_CAN0_UCCNF(val)	bfin_write16(CAN0_UCCNF, val)
+
+/* CAN Controller 0 Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN0_AM00L()		bfin_read16(CAN0_AM00L)
+#define bfin_write_CAN0_AM00L(val)	bfin_write16(CAN0_AM00L, val)
+#define bfin_read_CAN0_AM00H()		bfin_read16(CAN0_AM00H)
+#define bfin_write_CAN0_AM00H(val)	bfin_write16(CAN0_AM00H, val)
+#define bfin_read_CAN0_AM01L()		bfin_read16(CAN0_AM01L)
+#define bfin_write_CAN0_AM01L(val)	bfin_write16(CAN0_AM01L, val)
+#define bfin_read_CAN0_AM01H()		bfin_read16(CAN0_AM01H)
+#define bfin_write_CAN0_AM01H(val)	bfin_write16(CAN0_AM01H, val)
+#define bfin_read_CAN0_AM02L()		bfin_read16(CAN0_AM02L)
+#define bfin_write_CAN0_AM02L(val)	bfin_write16(CAN0_AM02L, val)
+#define bfin_read_CAN0_AM02H()		bfin_read16(CAN0_AM02H)
+#define bfin_write_CAN0_AM02H(val)	bfin_write16(CAN0_AM02H, val)
+#define bfin_read_CAN0_AM03L()		bfin_read16(CAN0_AM03L)
+#define bfin_write_CAN0_AM03L(val)	bfin_write16(CAN0_AM03L, val)
+#define bfin_read_CAN0_AM03H()		bfin_read16(CAN0_AM03H)
+#define bfin_write_CAN0_AM03H(val)	bfin_write16(CAN0_AM03H, val)
+#define bfin_read_CAN0_AM04L()		bfin_read16(CAN0_AM04L)
+#define bfin_write_CAN0_AM04L(val)	bfin_write16(CAN0_AM04L, val)
+#define bfin_read_CAN0_AM04H()		bfin_read16(CAN0_AM04H)
+#define bfin_write_CAN0_AM04H(val)	bfin_write16(CAN0_AM04H, val)
+#define bfin_read_CAN0_AM05L()		bfin_read16(CAN0_AM05L)
+#define bfin_write_CAN0_AM05L(val)	bfin_write16(CAN0_AM05L, val)
+#define bfin_read_CAN0_AM05H()		bfin_read16(CAN0_AM05H)
+#define bfin_write_CAN0_AM05H(val)	bfin_write16(CAN0_AM05H, val)
+#define bfin_read_CAN0_AM06L()		bfin_read16(CAN0_AM06L)
+#define bfin_write_CAN0_AM06L(val)	bfin_write16(CAN0_AM06L, val)
+#define bfin_read_CAN0_AM06H()		bfin_read16(CAN0_AM06H)
+#define bfin_write_CAN0_AM06H(val)	bfin_write16(CAN0_AM06H, val)
+#define bfin_read_CAN0_AM07L()		bfin_read16(CAN0_AM07L)
+#define bfin_write_CAN0_AM07L(val)	bfin_write16(CAN0_AM07L, val)
+#define bfin_read_CAN0_AM07H()		bfin_read16(CAN0_AM07H)
+#define bfin_write_CAN0_AM07H(val)	bfin_write16(CAN0_AM07H, val)
+#define bfin_read_CAN0_AM08L()		bfin_read16(CAN0_AM08L)
+#define bfin_write_CAN0_AM08L(val)	bfin_write16(CAN0_AM08L, val)
+#define bfin_read_CAN0_AM08H()		bfin_read16(CAN0_AM08H)
+#define bfin_write_CAN0_AM08H(val)	bfin_write16(CAN0_AM08H, val)
+#define bfin_read_CAN0_AM09L()		bfin_read16(CAN0_AM09L)
+#define bfin_write_CAN0_AM09L(val)	bfin_write16(CAN0_AM09L, val)
+#define bfin_read_CAN0_AM09H()		bfin_read16(CAN0_AM09H)
+#define bfin_write_CAN0_AM09H(val)	bfin_write16(CAN0_AM09H, val)
+#define bfin_read_CAN0_AM10L()		bfin_read16(CAN0_AM10L)
+#define bfin_write_CAN0_AM10L(val)	bfin_write16(CAN0_AM10L, val)
+#define bfin_read_CAN0_AM10H()		bfin_read16(CAN0_AM10H)
+#define bfin_write_CAN0_AM10H(val)	bfin_write16(CAN0_AM10H, val)
+#define bfin_read_CAN0_AM11L()		bfin_read16(CAN0_AM11L)
+#define bfin_write_CAN0_AM11L(val)	bfin_write16(CAN0_AM11L, val)
+#define bfin_read_CAN0_AM11H()		bfin_read16(CAN0_AM11H)
+#define bfin_write_CAN0_AM11H(val)	bfin_write16(CAN0_AM11H, val)
+#define bfin_read_CAN0_AM12L()		bfin_read16(CAN0_AM12L)
+#define bfin_write_CAN0_AM12L(val)	bfin_write16(CAN0_AM12L, val)
+#define bfin_read_CAN0_AM12H()		bfin_read16(CAN0_AM12H)
+#define bfin_write_CAN0_AM12H(val)	bfin_write16(CAN0_AM12H, val)
+#define bfin_read_CAN0_AM13L()		bfin_read16(CAN0_AM13L)
+#define bfin_write_CAN0_AM13L(val)	bfin_write16(CAN0_AM13L, val)
+#define bfin_read_CAN0_AM13H()		bfin_read16(CAN0_AM13H)
+#define bfin_write_CAN0_AM13H(val)	bfin_write16(CAN0_AM13H, val)
+#define bfin_read_CAN0_AM14L()		bfin_read16(CAN0_AM14L)
+#define bfin_write_CAN0_AM14L(val)	bfin_write16(CAN0_AM14L, val)
+#define bfin_read_CAN0_AM14H()		bfin_read16(CAN0_AM14H)
+#define bfin_write_CAN0_AM14H(val)	bfin_write16(CAN0_AM14H, val)
+#define bfin_read_CAN0_AM15L()		bfin_read16(CAN0_AM15L)
+#define bfin_write_CAN0_AM15L(val)	bfin_write16(CAN0_AM15L, val)
+#define bfin_read_CAN0_AM15H()		bfin_read16(CAN0_AM15H)
+#define bfin_write_CAN0_AM15H(val)	bfin_write16(CAN0_AM15H, val)
+
+/* CAN Controller 0 Accebfin_read_()tance Registers */
+
+#define bfin_read_CAN0_AM16L()		bfin_read16(CAN0_AM16L)
+#define bfin_write_CAN0_AM16L(val)	bfin_write16(CAN0_AM16L, val)
+#define bfin_read_CAN0_AM16H()		bfin_read16(CAN0_AM16H)
+#define bfin_write_CAN0_AM16H(val)	bfin_write16(CAN0_AM16H, val)
+#define bfin_read_CAN0_AM17L()		bfin_read16(CAN0_AM17L)
+#define bfin_write_CAN0_AM17L(val)	bfin_write16(CAN0_AM17L, val)
+#define bfin_read_CAN0_AM17H()		bfin_read16(CAN0_AM17H)
+#define bfin_write_CAN0_AM17H(val)	bfin_write16(CAN0_AM17H, val)
+#define bfin_read_CAN0_AM18L()		bfin_read16(CAN0_AM18L)
+#define bfin_write_CAN0_AM18L(val)	bfin_write16(CAN0_AM18L, val)
+#define bfin_read_CAN0_AM18H()		bfin_read16(CAN0_AM18H)
+#define bfin_write_CAN0_AM18H(val)	bfin_write16(CAN0_AM18H, val)
+#define bfin_read_CAN0_AM19L()		bfin_read16(CAN0_AM19L)
+#define bfin_write_CAN0_AM19L(val)	bfin_write16(CAN0_AM19L, val)
+#define bfin_read_CAN0_AM19H()		bfin_read16(CAN0_AM19H)
+#define bfin_write_CAN0_AM19H(val)	bfin_write16(CAN0_AM19H, val)
+#define bfin_read_CAN0_AM20L()		bfin_read16(CAN0_AM20L)
+#define bfin_write_CAN0_AM20L(val)	bfin_write16(CAN0_AM20L, val)
+#define bfin_read_CAN0_AM20H()		bfin_read16(CAN0_AM20H)
+#define bfin_write_CAN0_AM20H(val)	bfin_write16(CAN0_AM20H, val)
+#define bfin_read_CAN0_AM21L()		bfin_read16(CAN0_AM21L)
+#define bfin_write_CAN0_AM21L(val)	bfin_write16(CAN0_AM21L, val)
+#define bfin_read_CAN0_AM21H()		bfin_read16(CAN0_AM21H)
+#define bfin_write_CAN0_AM21H(val)	bfin_write16(CAN0_AM21H, val)
+#define bfin_read_CAN0_AM22L()		bfin_read16(CAN0_AM22L)
+#define bfin_write_CAN0_AM22L(val)	bfin_write16(CAN0_AM22L, val)
+#define bfin_read_CAN0_AM22H()		bfin_read16(CAN0_AM22H)
+#define bfin_write_CAN0_AM22H(val)	bfin_write16(CAN0_AM22H, val)
+#define bfin_read_CAN0_AM23L()		bfin_read16(CAN0_AM23L)
+#define bfin_write_CAN0_AM23L(val)	bfin_write16(CAN0_AM23L, val)
+#define bfin_read_CAN0_AM23H()		bfin_read16(CAN0_AM23H)
+#define bfin_write_CAN0_AM23H(val)	bfin_write16(CAN0_AM23H, val)
+#define bfin_read_CAN0_AM24L()		bfin_read16(CAN0_AM24L)
+#define bfin_write_CAN0_AM24L(val)	bfin_write16(CAN0_AM24L, val)
+#define bfin_read_CAN0_AM24H()		bfin_read16(CAN0_AM24H)
+#define bfin_write_CAN0_AM24H(val)	bfin_write16(CAN0_AM24H, val)
+#define bfin_read_CAN0_AM25L()		bfin_read16(CAN0_AM25L)
+#define bfin_write_CAN0_AM25L(val)	bfin_write16(CAN0_AM25L, val)
+#define bfin_read_CAN0_AM25H()		bfin_read16(CAN0_AM25H)
+#define bfin_write_CAN0_AM25H(val)	bfin_write16(CAN0_AM25H, val)
+#define bfin_read_CAN0_AM26L()		bfin_read16(CAN0_AM26L)
+#define bfin_write_CAN0_AM26L(val)	bfin_write16(CAN0_AM26L, val)
+#define bfin_read_CAN0_AM26H()		bfin_read16(CAN0_AM26H)
+#define bfin_write_CAN0_AM26H(val)	bfin_write16(CAN0_AM26H, val)
+#define bfin_read_CAN0_AM27L()		bfin_read16(CAN0_AM27L)
+#define bfin_write_CAN0_AM27L(val)	bfin_write16(CAN0_AM27L, val)
+#define bfin_read_CAN0_AM27H()		bfin_read16(CAN0_AM27H)
+#define bfin_write_CAN0_AM27H(val)	bfin_write16(CAN0_AM27H, val)
+#define bfin_read_CAN0_AM28L()		bfin_read16(CAN0_AM28L)
+#define bfin_write_CAN0_AM28L(val)	bfin_write16(CAN0_AM28L, val)
+#define bfin_read_CAN0_AM28H()		bfin_read16(CAN0_AM28H)
+#define bfin_write_CAN0_AM28H(val)	bfin_write16(CAN0_AM28H, val)
+#define bfin_read_CAN0_AM29L()		bfin_read16(CAN0_AM29L)
+#define bfin_write_CAN0_AM29L(val)	bfin_write16(CAN0_AM29L, val)
+#define bfin_read_CAN0_AM29H()		bfin_read16(CAN0_AM29H)
+#define bfin_write_CAN0_AM29H(val)	bfin_write16(CAN0_AM29H, val)
+#define bfin_read_CAN0_AM30L()		bfin_read16(CAN0_AM30L)
+#define bfin_write_CAN0_AM30L(val)	bfin_write16(CAN0_AM30L, val)
+#define bfin_read_CAN0_AM30H()		bfin_read16(CAN0_AM30H)
+#define bfin_write_CAN0_AM30H(val)	bfin_write16(CAN0_AM30H, val)
+#define bfin_read_CAN0_AM31L()		bfin_read16(CAN0_AM31L)
+#define bfin_write_CAN0_AM31L(val)	bfin_write16(CAN0_AM31L, val)
+#define bfin_read_CAN0_AM31H()		bfin_read16(CAN0_AM31H)
+#define bfin_write_CAN0_AM31H(val)	bfin_write16(CAN0_AM31H, val)
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define bfin_read_CAN0_MB00_DATA0()		bfin_read16(CAN0_MB00_DATA0)
+#define bfin_write_CAN0_MB00_DATA0(val)		bfin_write16(CAN0_MB00_DATA0, val)
+#define bfin_read_CAN0_MB00_DATA1()		bfin_read16(CAN0_MB00_DATA1)
+#define bfin_write_CAN0_MB00_DATA1(val)		bfin_write16(CAN0_MB00_DATA1, val)
+#define bfin_read_CAN0_MB00_DATA2()		bfin_read16(CAN0_MB00_DATA2)
+#define bfin_write_CAN0_MB00_DATA2(val)		bfin_write16(CAN0_MB00_DATA2, val)
+#define bfin_read_CAN0_MB00_DATA3()		bfin_read16(CAN0_MB00_DATA3)
+#define bfin_write_CAN0_MB00_DATA3(val)		bfin_write16(CAN0_MB00_DATA3, val)
+#define bfin_read_CAN0_MB00_LENGTH()		bfin_read16(CAN0_MB00_LENGTH)
+#define bfin_write_CAN0_MB00_LENGTH(val)	bfin_write16(CAN0_MB00_LENGTH, val)
+#define bfin_read_CAN0_MB00_TIMESTAMP()		bfin_read16(CAN0_MB00_TIMESTAMP)
+#define bfin_write_CAN0_MB00_TIMESTAMP(val)	bfin_write16(CAN0_MB00_TIMESTAMP, val)
+#define bfin_read_CAN0_MB00_ID0()		bfin_read16(CAN0_MB00_ID0)
+#define bfin_write_CAN0_MB00_ID0(val)		bfin_write16(CAN0_MB00_ID0, val)
+#define bfin_read_CAN0_MB00_ID1()		bfin_read16(CAN0_MB00_ID1)
+#define bfin_write_CAN0_MB00_ID1(val)		bfin_write16(CAN0_MB00_ID1, val)
+#define bfin_read_CAN0_MB01_DATA0()		bfin_read16(CAN0_MB01_DATA0)
+#define bfin_write_CAN0_MB01_DATA0(val)		bfin_write16(CAN0_MB01_DATA0, val)
+#define bfin_read_CAN0_MB01_DATA1()		bfin_read16(CAN0_MB01_DATA1)
+#define bfin_write_CAN0_MB01_DATA1(val)		bfin_write16(CAN0_MB01_DATA1, val)
+#define bfin_read_CAN0_MB01_DATA2()		bfin_read16(CAN0_MB01_DATA2)
+#define bfin_write_CAN0_MB01_DATA2(val)		bfin_write16(CAN0_MB01_DATA2, val)
+#define bfin_read_CAN0_MB01_DATA3()		bfin_read16(CAN0_MB01_DATA3)
+#define bfin_write_CAN0_MB01_DATA3(val)		bfin_write16(CAN0_MB01_DATA3, val)
+#define bfin_read_CAN0_MB01_LENGTH()		bfin_read16(CAN0_MB01_LENGTH)
+#define bfin_write_CAN0_MB01_LENGTH(val)	bfin_write16(CAN0_MB01_LENGTH, val)
+#define bfin_read_CAN0_MB01_TIMESTAMP()		bfin_read16(CAN0_MB01_TIMESTAMP)
+#define bfin_write_CAN0_MB01_TIMESTAMP(val)	bfin_write16(CAN0_MB01_TIMESTAMP, val)
+#define bfin_read_CAN0_MB01_ID0()		bfin_read16(CAN0_MB01_ID0)
+#define bfin_write_CAN0_MB01_ID0(val)		bfin_write16(CAN0_MB01_ID0, val)
+#define bfin_read_CAN0_MB01_ID1()		bfin_read16(CAN0_MB01_ID1)
+#define bfin_write_CAN0_MB01_ID1(val)		bfin_write16(CAN0_MB01_ID1, val)
+#define bfin_read_CAN0_MB02_DATA0()		bfin_read16(CAN0_MB02_DATA0)
+#define bfin_write_CAN0_MB02_DATA0(val)		bfin_write16(CAN0_MB02_DATA0, val)
+#define bfin_read_CAN0_MB02_DATA1()		bfin_read16(CAN0_MB02_DATA1)
+#define bfin_write_CAN0_MB02_DATA1(val)		bfin_write16(CAN0_MB02_DATA1, val)
+#define bfin_read_CAN0_MB02_DATA2()		bfin_read16(CAN0_MB02_DATA2)
+#define bfin_write_CAN0_MB02_DATA2(val)		bfin_write16(CAN0_MB02_DATA2, val)
+#define bfin_read_CAN0_MB02_DATA3()		bfin_read16(CAN0_MB02_DATA3)
+#define bfin_write_CAN0_MB02_DATA3(val)		bfin_write16(CAN0_MB02_DATA3, val)
+#define bfin_read_CAN0_MB02_LENGTH()		bfin_read16(CAN0_MB02_LENGTH)
+#define bfin_write_CAN0_MB02_LENGTH(val)	bfin_write16(CAN0_MB02_LENGTH, val)
+#define bfin_read_CAN0_MB02_TIMESTAMP()		bfin_read16(CAN0_MB02_TIMESTAMP)
+#define bfin_write_CAN0_MB02_TIMESTAMP(val)	bfin_write16(CAN0_MB02_TIMESTAMP, val)
+#define bfin_read_CAN0_MB02_ID0()		bfin_read16(CAN0_MB02_ID0)
+#define bfin_write_CAN0_MB02_ID0(val)		bfin_write16(CAN0_MB02_ID0, val)
+#define bfin_read_CAN0_MB02_ID1()		bfin_read16(CAN0_MB02_ID1)
+#define bfin_write_CAN0_MB02_ID1(val)		bfin_write16(CAN0_MB02_ID1, val)
+#define bfin_read_CAN0_MB03_DATA0()		bfin_read16(CAN0_MB03_DATA0)
+#define bfin_write_CAN0_MB03_DATA0(val)		bfin_write16(CAN0_MB03_DATA0, val)
+#define bfin_read_CAN0_MB03_DATA1()		bfin_read16(CAN0_MB03_DATA1)
+#define bfin_write_CAN0_MB03_DATA1(val)		bfin_write16(CAN0_MB03_DATA1, val)
+#define bfin_read_CAN0_MB03_DATA2()		bfin_read16(CAN0_MB03_DATA2)
+#define bfin_write_CAN0_MB03_DATA2(val)		bfin_write16(CAN0_MB03_DATA2, val)
+#define bfin_read_CAN0_MB03_DATA3()		bfin_read16(CAN0_MB03_DATA3)
+#define bfin_write_CAN0_MB03_DATA3(val)		bfin_write16(CAN0_MB03_DATA3, val)
+#define bfin_read_CAN0_MB03_LENGTH()		bfin_read16(CAN0_MB03_LENGTH)
+#define bfin_write_CAN0_MB03_LENGTH(val)	bfin_write16(CAN0_MB03_LENGTH, val)
+#define bfin_read_CAN0_MB03_TIMESTAMP()		bfin_read16(CAN0_MB03_TIMESTAMP)
+#define bfin_write_CAN0_MB03_TIMESTAMP(val)	bfin_write16(CAN0_MB03_TIMESTAMP, val)
+#define bfin_read_CAN0_MB03_ID0()		bfin_read16(CAN0_MB03_ID0)
+#define bfin_write_CAN0_MB03_ID0(val)		bfin_write16(CAN0_MB03_ID0, val)
+#define bfin_read_CAN0_MB03_ID1()		bfin_read16(CAN0_MB03_ID1)
+#define bfin_write_CAN0_MB03_ID1(val)		bfin_write16(CAN0_MB03_ID1, val)
+#define bfin_read_CAN0_MB04_DATA0()		bfin_read16(CAN0_MB04_DATA0)
+#define bfin_write_CAN0_MB04_DATA0(val)		bfin_write16(CAN0_MB04_DATA0, val)
+#define bfin_read_CAN0_MB04_DATA1()		bfin_read16(CAN0_MB04_DATA1)
+#define bfin_write_CAN0_MB04_DATA1(val)		bfin_write16(CAN0_MB04_DATA1, val)
+#define bfin_read_CAN0_MB04_DATA2()		bfin_read16(CAN0_MB04_DATA2)
+#define bfin_write_CAN0_MB04_DATA2(val)		bfin_write16(CAN0_MB04_DATA2, val)
+#define bfin_read_CAN0_MB04_DATA3()		bfin_read16(CAN0_MB04_DATA3)
+#define bfin_write_CAN0_MB04_DATA3(val)		bfin_write16(CAN0_MB04_DATA3, val)
+#define bfin_read_CAN0_MB04_LENGTH()		bfin_read16(CAN0_MB04_LENGTH)
+#define bfin_write_CAN0_MB04_LENGTH(val)	bfin_write16(CAN0_MB04_LENGTH, val)
+#define bfin_read_CAN0_MB04_TIMESTAMP()		bfin_read16(CAN0_MB04_TIMESTAMP)
+#define bfin_write_CAN0_MB04_TIMESTAMP(val)	bfin_write16(CAN0_MB04_TIMESTAMP, val)
+#define bfin_read_CAN0_MB04_ID0()		bfin_read16(CAN0_MB04_ID0)
+#define bfin_write_CAN0_MB04_ID0(val)		bfin_write16(CAN0_MB04_ID0, val)
+#define bfin_read_CAN0_MB04_ID1()		bfin_read16(CAN0_MB04_ID1)
+#define bfin_write_CAN0_MB04_ID1(val)		bfin_write16(CAN0_MB04_ID1, val)
+#define bfin_read_CAN0_MB05_DATA0()		bfin_read16(CAN0_MB05_DATA0)
+#define bfin_write_CAN0_MB05_DATA0(val)		bfin_write16(CAN0_MB05_DATA0, val)
+#define bfin_read_CAN0_MB05_DATA1()		bfin_read16(CAN0_MB05_DATA1)
+#define bfin_write_CAN0_MB05_DATA1(val)		bfin_write16(CAN0_MB05_DATA1, val)
+#define bfin_read_CAN0_MB05_DATA2()		bfin_read16(CAN0_MB05_DATA2)
+#define bfin_write_CAN0_MB05_DATA2(val)		bfin_write16(CAN0_MB05_DATA2, val)
+#define bfin_read_CAN0_MB05_DATA3()		bfin_read16(CAN0_MB05_DATA3)
+#define bfin_write_CAN0_MB05_DATA3(val)		bfin_write16(CAN0_MB05_DATA3, val)
+#define bfin_read_CAN0_MB05_LENGTH()		bfin_read16(CAN0_MB05_LENGTH)
+#define bfin_write_CAN0_MB05_LENGTH(val)	bfin_write16(CAN0_MB05_LENGTH, val)
+#define bfin_read_CAN0_MB05_TIMESTAMP()		bfin_read16(CAN0_MB05_TIMESTAMP)
+#define bfin_write_CAN0_MB05_TIMESTAMP(val)	bfin_write16(CAN0_MB05_TIMESTAMP, val)
+#define bfin_read_CAN0_MB05_ID0()		bfin_read16(CAN0_MB05_ID0)
+#define bfin_write_CAN0_MB05_ID0(val)		bfin_write16(CAN0_MB05_ID0, val)
+#define bfin_read_CAN0_MB05_ID1()		bfin_read16(CAN0_MB05_ID1)
+#define bfin_write_CAN0_MB05_ID1(val)		bfin_write16(CAN0_MB05_ID1, val)
+#define bfin_read_CAN0_MB06_DATA0()		bfin_read16(CAN0_MB06_DATA0)
+#define bfin_write_CAN0_MB06_DATA0(val)		bfin_write16(CAN0_MB06_DATA0, val)
+#define bfin_read_CAN0_MB06_DATA1()		bfin_read16(CAN0_MB06_DATA1)
+#define bfin_write_CAN0_MB06_DATA1(val)		bfin_write16(CAN0_MB06_DATA1, val)
+#define bfin_read_CAN0_MB06_DATA2()		bfin_read16(CAN0_MB06_DATA2)
+#define bfin_write_CAN0_MB06_DATA2(val)		bfin_write16(CAN0_MB06_DATA2, val)
+#define bfin_read_CAN0_MB06_DATA3()		bfin_read16(CAN0_MB06_DATA3)
+#define bfin_write_CAN0_MB06_DATA3(val)		bfin_write16(CAN0_MB06_DATA3, val)
+#define bfin_read_CAN0_MB06_LENGTH()		bfin_read16(CAN0_MB06_LENGTH)
+#define bfin_write_CAN0_MB06_LENGTH(val)	bfin_write16(CAN0_MB06_LENGTH, val)
+#define bfin_read_CAN0_MB06_TIMESTAMP()		bfin_read16(CAN0_MB06_TIMESTAMP)
+#define bfin_write_CAN0_MB06_TIMESTAMP(val)	bfin_write16(CAN0_MB06_TIMESTAMP, val)
+#define bfin_read_CAN0_MB06_ID0()		bfin_read16(CAN0_MB06_ID0)
+#define bfin_write_CAN0_MB06_ID0(val)		bfin_write16(CAN0_MB06_ID0, val)
+#define bfin_read_CAN0_MB06_ID1()		bfin_read16(CAN0_MB06_ID1)
+#define bfin_write_CAN0_MB06_ID1(val)		bfin_write16(CAN0_MB06_ID1, val)
+#define bfin_read_CAN0_MB07_DATA0()		bfin_read16(CAN0_MB07_DATA0)
+#define bfin_write_CAN0_MB07_DATA0(val)		bfin_write16(CAN0_MB07_DATA0, val)
+#define bfin_read_CAN0_MB07_DATA1()		bfin_read16(CAN0_MB07_DATA1)
+#define bfin_write_CAN0_MB07_DATA1(val)		bfin_write16(CAN0_MB07_DATA1, val)
+#define bfin_read_CAN0_MB07_DATA2()		bfin_read16(CAN0_MB07_DATA2)
+#define bfin_write_CAN0_MB07_DATA2(val)		bfin_write16(CAN0_MB07_DATA2, val)
+#define bfin_read_CAN0_MB07_DATA3()		bfin_read16(CAN0_MB07_DATA3)
+#define bfin_write_CAN0_MB07_DATA3(val)		bfin_write16(CAN0_MB07_DATA3, val)
+#define bfin_read_CAN0_MB07_LENGTH()		bfin_read16(CAN0_MB07_LENGTH)
+#define bfin_write_CAN0_MB07_LENGTH(val)	bfin_write16(CAN0_MB07_LENGTH, val)
+#define bfin_read_CAN0_MB07_TIMESTAMP()		bfin_read16(CAN0_MB07_TIMESTAMP)
+#define bfin_write_CAN0_MB07_TIMESTAMP(val)	bfin_write16(CAN0_MB07_TIMESTAMP, val)
+#define bfin_read_CAN0_MB07_ID0()		bfin_read16(CAN0_MB07_ID0)
+#define bfin_write_CAN0_MB07_ID0(val)		bfin_write16(CAN0_MB07_ID0, val)
+#define bfin_read_CAN0_MB07_ID1()		bfin_read16(CAN0_MB07_ID1)
+#define bfin_write_CAN0_MB07_ID1(val)		bfin_write16(CAN0_MB07_ID1, val)
+#define bfin_read_CAN0_MB08_DATA0()		bfin_read16(CAN0_MB08_DATA0)
+#define bfin_write_CAN0_MB08_DATA0(val)		bfin_write16(CAN0_MB08_DATA0, val)
+#define bfin_read_CAN0_MB08_DATA1()		bfin_read16(CAN0_MB08_DATA1)
+#define bfin_write_CAN0_MB08_DATA1(val)		bfin_write16(CAN0_MB08_DATA1, val)
+#define bfin_read_CAN0_MB08_DATA2()		bfin_read16(CAN0_MB08_DATA2)
+#define bfin_write_CAN0_MB08_DATA2(val)		bfin_write16(CAN0_MB08_DATA2, val)
+#define bfin_read_CAN0_MB08_DATA3()		bfin_read16(CAN0_MB08_DATA3)
+#define bfin_write_CAN0_MB08_DATA3(val)		bfin_write16(CAN0_MB08_DATA3, val)
+#define bfin_read_CAN0_MB08_LENGTH()		bfin_read16(CAN0_MB08_LENGTH)
+#define bfin_write_CAN0_MB08_LENGTH(val)	bfin_write16(CAN0_MB08_LENGTH, val)
+#define bfin_read_CAN0_MB08_TIMESTAMP()		bfin_read16(CAN0_MB08_TIMESTAMP)
+#define bfin_write_CAN0_MB08_TIMESTAMP(val)	bfin_write16(CAN0_MB08_TIMESTAMP, val)
+#define bfin_read_CAN0_MB08_ID0()		bfin_read16(CAN0_MB08_ID0)
+#define bfin_write_CAN0_MB08_ID0(val)		bfin_write16(CAN0_MB08_ID0, val)
+#define bfin_read_CAN0_MB08_ID1()		bfin_read16(CAN0_MB08_ID1)
+#define bfin_write_CAN0_MB08_ID1(val)		bfin_write16(CAN0_MB08_ID1, val)
+#define bfin_read_CAN0_MB09_DATA0()		bfin_read16(CAN0_MB09_DATA0)
+#define bfin_write_CAN0_MB09_DATA0(val)		bfin_write16(CAN0_MB09_DATA0, val)
+#define bfin_read_CAN0_MB09_DATA1()		bfin_read16(CAN0_MB09_DATA1)
+#define bfin_write_CAN0_MB09_DATA1(val)		bfin_write16(CAN0_MB09_DATA1, val)
+#define bfin_read_CAN0_MB09_DATA2()		bfin_read16(CAN0_MB09_DATA2)
+#define bfin_write_CAN0_MB09_DATA2(val)		bfin_write16(CAN0_MB09_DATA2, val)
+#define bfin_read_CAN0_MB09_DATA3()		bfin_read16(CAN0_MB09_DATA3)
+#define bfin_write_CAN0_MB09_DATA3(val)		bfin_write16(CAN0_MB09_DATA3, val)
+#define bfin_read_CAN0_MB09_LENGTH()		bfin_read16(CAN0_MB09_LENGTH)
+#define bfin_write_CAN0_MB09_LENGTH(val)	bfin_write16(CAN0_MB09_LENGTH, val)
+#define bfin_read_CAN0_MB09_TIMESTAMP()		bfin_read16(CAN0_MB09_TIMESTAMP)
+#define bfin_write_CAN0_MB09_TIMESTAMP(val)	bfin_write16(CAN0_MB09_TIMESTAMP, val)
+#define bfin_read_CAN0_MB09_ID0()		bfin_read16(CAN0_MB09_ID0)
+#define bfin_write_CAN0_MB09_ID0(val)		bfin_write16(CAN0_MB09_ID0, val)
+#define bfin_read_CAN0_MB09_ID1()		bfin_read16(CAN0_MB09_ID1)
+#define bfin_write_CAN0_MB09_ID1(val)		bfin_write16(CAN0_MB09_ID1, val)
+#define bfin_read_CAN0_MB10_DATA0()		bfin_read16(CAN0_MB10_DATA0)
+#define bfin_write_CAN0_MB10_DATA0(val)		bfin_write16(CAN0_MB10_DATA0, val)
+#define bfin_read_CAN0_MB10_DATA1()		bfin_read16(CAN0_MB10_DATA1)
+#define bfin_write_CAN0_MB10_DATA1(val)		bfin_write16(CAN0_MB10_DATA1, val)
+#define bfin_read_CAN0_MB10_DATA2()		bfin_read16(CAN0_MB10_DATA2)
+#define bfin_write_CAN0_MB10_DATA2(val)		bfin_write16(CAN0_MB10_DATA2, val)
+#define bfin_read_CAN0_MB10_DATA3()		bfin_read16(CAN0_MB10_DATA3)
+#define bfin_write_CAN0_MB10_DATA3(val)		bfin_write16(CAN0_MB10_DATA3, val)
+#define bfin_read_CAN0_MB10_LENGTH()		bfin_read16(CAN0_MB10_LENGTH)
+#define bfin_write_CAN0_MB10_LENGTH(val)	bfin_write16(CAN0_MB10_LENGTH, val)
+#define bfin_read_CAN0_MB10_TIMESTAMP()		bfin_read16(CAN0_MB10_TIMESTAMP)
+#define bfin_write_CAN0_MB10_TIMESTAMP(val)	bfin_write16(CAN0_MB10_TIMESTAMP, val)
+#define bfin_read_CAN0_MB10_ID0()		bfin_read16(CAN0_MB10_ID0)
+#define bfin_write_CAN0_MB10_ID0(val)		bfin_write16(CAN0_MB10_ID0, val)
+#define bfin_read_CAN0_MB10_ID1()		bfin_read16(CAN0_MB10_ID1)
+#define bfin_write_CAN0_MB10_ID1(val)		bfin_write16(CAN0_MB10_ID1, val)
+#define bfin_read_CAN0_MB11_DATA0()		bfin_read16(CAN0_MB11_DATA0)
+#define bfin_write_CAN0_MB11_DATA0(val)		bfin_write16(CAN0_MB11_DATA0, val)
+#define bfin_read_CAN0_MB11_DATA1()		bfin_read16(CAN0_MB11_DATA1)
+#define bfin_write_CAN0_MB11_DATA1(val)		bfin_write16(CAN0_MB11_DATA1, val)
+#define bfin_read_CAN0_MB11_DATA2()		bfin_read16(CAN0_MB11_DATA2)
+#define bfin_write_CAN0_MB11_DATA2(val)		bfin_write16(CAN0_MB11_DATA2, val)
+#define bfin_read_CAN0_MB11_DATA3()		bfin_read16(CAN0_MB11_DATA3)
+#define bfin_write_CAN0_MB11_DATA3(val)		bfin_write16(CAN0_MB11_DATA3, val)
+#define bfin_read_CAN0_MB11_LENGTH()		bfin_read16(CAN0_MB11_LENGTH)
+#define bfin_write_CAN0_MB11_LENGTH(val)	bfin_write16(CAN0_MB11_LENGTH, val)
+#define bfin_read_CAN0_MB11_TIMESTAMP()		bfin_read16(CAN0_MB11_TIMESTAMP)
+#define bfin_write_CAN0_MB11_TIMESTAMP(val)	bfin_write16(CAN0_MB11_TIMESTAMP, val)
+#define bfin_read_CAN0_MB11_ID0()		bfin_read16(CAN0_MB11_ID0)
+#define bfin_write_CAN0_MB11_ID0(val)		bfin_write16(CAN0_MB11_ID0, val)
+#define bfin_read_CAN0_MB11_ID1()		bfin_read16(CAN0_MB11_ID1)
+#define bfin_write_CAN0_MB11_ID1(val)		bfin_write16(CAN0_MB11_ID1, val)
+#define bfin_read_CAN0_MB12_DATA0()		bfin_read16(CAN0_MB12_DATA0)
+#define bfin_write_CAN0_MB12_DATA0(val)		bfin_write16(CAN0_MB12_DATA0, val)
+#define bfin_read_CAN0_MB12_DATA1()		bfin_read16(CAN0_MB12_DATA1)
+#define bfin_write_CAN0_MB12_DATA1(val)		bfin_write16(CAN0_MB12_DATA1, val)
+#define bfin_read_CAN0_MB12_DATA2()		bfin_read16(CAN0_MB12_DATA2)
+#define bfin_write_CAN0_MB12_DATA2(val)		bfin_write16(CAN0_MB12_DATA2, val)
+#define bfin_read_CAN0_MB12_DATA3()		bfin_read16(CAN0_MB12_DATA3)
+#define bfin_write_CAN0_MB12_DATA3(val)		bfin_write16(CAN0_MB12_DATA3, val)
+#define bfin_read_CAN0_MB12_LENGTH()		bfin_read16(CAN0_MB12_LENGTH)
+#define bfin_write_CAN0_MB12_LENGTH(val)	bfin_write16(CAN0_MB12_LENGTH, val)
+#define bfin_read_CAN0_MB12_TIMESTAMP()		bfin_read16(CAN0_MB12_TIMESTAMP)
+#define bfin_write_CAN0_MB12_TIMESTAMP(val)	bfin_write16(CAN0_MB12_TIMESTAMP, val)
+#define bfin_read_CAN0_MB12_ID0()		bfin_read16(CAN0_MB12_ID0)
+#define bfin_write_CAN0_MB12_ID0(val)		bfin_write16(CAN0_MB12_ID0, val)
+#define bfin_read_CAN0_MB12_ID1()		bfin_read16(CAN0_MB12_ID1)
+#define bfin_write_CAN0_MB12_ID1(val)		bfin_write16(CAN0_MB12_ID1, val)
+#define bfin_read_CAN0_MB13_DATA0()		bfin_read16(CAN0_MB13_DATA0)
+#define bfin_write_CAN0_MB13_DATA0(val)		bfin_write16(CAN0_MB13_DATA0, val)
+#define bfin_read_CAN0_MB13_DATA1()		bfin_read16(CAN0_MB13_DATA1)
+#define bfin_write_CAN0_MB13_DATA1(val)		bfin_write16(CAN0_MB13_DATA1, val)
+#define bfin_read_CAN0_MB13_DATA2()		bfin_read16(CAN0_MB13_DATA2)
+#define bfin_write_CAN0_MB13_DATA2(val)		bfin_write16(CAN0_MB13_DATA2, val)
+#define bfin_read_CAN0_MB13_DATA3()		bfin_read16(CAN0_MB13_DATA3)
+#define bfin_write_CAN0_MB13_DATA3(val)		bfin_write16(CAN0_MB13_DATA3, val)
+#define bfin_read_CAN0_MB13_LENGTH()		bfin_read16(CAN0_MB13_LENGTH)
+#define bfin_write_CAN0_MB13_LENGTH(val)	bfin_write16(CAN0_MB13_LENGTH, val)
+#define bfin_read_CAN0_MB13_TIMESTAMP()		bfin_read16(CAN0_MB13_TIMESTAMP)
+#define bfin_write_CAN0_MB13_TIMESTAMP(val)	bfin_write16(CAN0_MB13_TIMESTAMP, val)
+#define bfin_read_CAN0_MB13_ID0()		bfin_read16(CAN0_MB13_ID0)
+#define bfin_write_CAN0_MB13_ID0(val)		bfin_write16(CAN0_MB13_ID0, val)
+#define bfin_read_CAN0_MB13_ID1()		bfin_read16(CAN0_MB13_ID1)
+#define bfin_write_CAN0_MB13_ID1(val)		bfin_write16(CAN0_MB13_ID1, val)
+#define bfin_read_CAN0_MB14_DATA0()		bfin_read16(CAN0_MB14_DATA0)
+#define bfin_write_CAN0_MB14_DATA0(val)		bfin_write16(CAN0_MB14_DATA0, val)
+#define bfin_read_CAN0_MB14_DATA1()		bfin_read16(CAN0_MB14_DATA1)
+#define bfin_write_CAN0_MB14_DATA1(val)		bfin_write16(CAN0_MB14_DATA1, val)
+#define bfin_read_CAN0_MB14_DATA2()		bfin_read16(CAN0_MB14_DATA2)
+#define bfin_write_CAN0_MB14_DATA2(val)		bfin_write16(CAN0_MB14_DATA2, val)
+#define bfin_read_CAN0_MB14_DATA3()		bfin_read16(CAN0_MB14_DATA3)
+#define bfin_write_CAN0_MB14_DATA3(val)		bfin_write16(CAN0_MB14_DATA3, val)
+#define bfin_read_CAN0_MB14_LENGTH()		bfin_read16(CAN0_MB14_LENGTH)
+#define bfin_write_CAN0_MB14_LENGTH(val)	bfin_write16(CAN0_MB14_LENGTH, val)
+#define bfin_read_CAN0_MB14_TIMESTAMP()		bfin_read16(CAN0_MB14_TIMESTAMP)
+#define bfin_write_CAN0_MB14_TIMESTAMP(val)	bfin_write16(CAN0_MB14_TIMESTAMP, val)
+#define bfin_read_CAN0_MB14_ID0()		bfin_read16(CAN0_MB14_ID0)
+#define bfin_write_CAN0_MB14_ID0(val)		bfin_write16(CAN0_MB14_ID0, val)
+#define bfin_read_CAN0_MB14_ID1()		bfin_read16(CAN0_MB14_ID1)
+#define bfin_write_CAN0_MB14_ID1(val)		bfin_write16(CAN0_MB14_ID1, val)
+#define bfin_read_CAN0_MB15_DATA0()		bfin_read16(CAN0_MB15_DATA0)
+#define bfin_write_CAN0_MB15_DATA0(val)		bfin_write16(CAN0_MB15_DATA0, val)
+#define bfin_read_CAN0_MB15_DATA1()		bfin_read16(CAN0_MB15_DATA1)
+#define bfin_write_CAN0_MB15_DATA1(val)		bfin_write16(CAN0_MB15_DATA1, val)
+#define bfin_read_CAN0_MB15_DATA2()		bfin_read16(CAN0_MB15_DATA2)
+#define bfin_write_CAN0_MB15_DATA2(val)		bfin_write16(CAN0_MB15_DATA2, val)
+#define bfin_read_CAN0_MB15_DATA3()		bfin_read16(CAN0_MB15_DATA3)
+#define bfin_write_CAN0_MB15_DATA3(val)		bfin_write16(CAN0_MB15_DATA3, val)
+#define bfin_read_CAN0_MB15_LENGTH()		bfin_read16(CAN0_MB15_LENGTH)
+#define bfin_write_CAN0_MB15_LENGTH(val)	bfin_write16(CAN0_MB15_LENGTH, val)
+#define bfin_read_CAN0_MB15_TIMESTAMP()		bfin_read16(CAN0_MB15_TIMESTAMP)
+#define bfin_write_CAN0_MB15_TIMESTAMP(val)	bfin_write16(CAN0_MB15_TIMESTAMP, val)
+#define bfin_read_CAN0_MB15_ID0()		bfin_read16(CAN0_MB15_ID0)
+#define bfin_write_CAN0_MB15_ID0(val)		bfin_write16(CAN0_MB15_ID0, val)
+#define bfin_read_CAN0_MB15_ID1()		bfin_read16(CAN0_MB15_ID1)
+#define bfin_write_CAN0_MB15_ID1(val)		bfin_write16(CAN0_MB15_ID1, val)
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define bfin_read_CAN0_MB16_DATA0()		bfin_read16(CAN0_MB16_DATA0)
+#define bfin_write_CAN0_MB16_DATA0(val)		bfin_write16(CAN0_MB16_DATA0, val)
+#define bfin_read_CAN0_MB16_DATA1()		bfin_read16(CAN0_MB16_DATA1)
+#define bfin_write_CAN0_MB16_DATA1(val)		bfin_write16(CAN0_MB16_DATA1, val)
+#define bfin_read_CAN0_MB16_DATA2()		bfin_read16(CAN0_MB16_DATA2)
+#define bfin_write_CAN0_MB16_DATA2(val)		bfin_write16(CAN0_MB16_DATA2, val)
+#define bfin_read_CAN0_MB16_DATA3()		bfin_read16(CAN0_MB16_DATA3)
+#define bfin_write_CAN0_MB16_DATA3(val)		bfin_write16(CAN0_MB16_DATA3, val)
+#define bfin_read_CAN0_MB16_LENGTH()		bfin_read16(CAN0_MB16_LENGTH)
+#define bfin_write_CAN0_MB16_LENGTH(val)	bfin_write16(CAN0_MB16_LENGTH, val)
+#define bfin_read_CAN0_MB16_TIMESTAMP()		bfin_read16(CAN0_MB16_TIMESTAMP)
+#define bfin_write_CAN0_MB16_TIMESTAMP(val)	bfin_write16(CAN0_MB16_TIMESTAMP, val)
+#define bfin_read_CAN0_MB16_ID0()		bfin_read16(CAN0_MB16_ID0)
+#define bfin_write_CAN0_MB16_ID0(val)		bfin_write16(CAN0_MB16_ID0, val)
+#define bfin_read_CAN0_MB16_ID1()		bfin_read16(CAN0_MB16_ID1)
+#define bfin_write_CAN0_MB16_ID1(val)		bfin_write16(CAN0_MB16_ID1, val)
+#define bfin_read_CAN0_MB17_DATA0()		bfin_read16(CAN0_MB17_DATA0)
+#define bfin_write_CAN0_MB17_DATA0(val)		bfin_write16(CAN0_MB17_DATA0, val)
+#define bfin_read_CAN0_MB17_DATA1()		bfin_read16(CAN0_MB17_DATA1)
+#define bfin_write_CAN0_MB17_DATA1(val)		bfin_write16(CAN0_MB17_DATA1, val)
+#define bfin_read_CAN0_MB17_DATA2()		bfin_read16(CAN0_MB17_DATA2)
+#define bfin_write_CAN0_MB17_DATA2(val)		bfin_write16(CAN0_MB17_DATA2, val)
+#define bfin_read_CAN0_MB17_DATA3()		bfin_read16(CAN0_MB17_DATA3)
+#define bfin_write_CAN0_MB17_DATA3(val)		bfin_write16(CAN0_MB17_DATA3, val)
+#define bfin_read_CAN0_MB17_LENGTH()		bfin_read16(CAN0_MB17_LENGTH)
+#define bfin_write_CAN0_MB17_LENGTH(val)	bfin_write16(CAN0_MB17_LENGTH, val)
+#define bfin_read_CAN0_MB17_TIMESTAMP()		bfin_read16(CAN0_MB17_TIMESTAMP)
+#define bfin_write_CAN0_MB17_TIMESTAMP(val)	bfin_write16(CAN0_MB17_TIMESTAMP, val)
+#define bfin_read_CAN0_MB17_ID0()		bfin_read16(CAN0_MB17_ID0)
+#define bfin_write_CAN0_MB17_ID0(val)		bfin_write16(CAN0_MB17_ID0, val)
+#define bfin_read_CAN0_MB17_ID1()		bfin_read16(CAN0_MB17_ID1)
+#define bfin_write_CAN0_MB17_ID1(val)		bfin_write16(CAN0_MB17_ID1, val)
+#define bfin_read_CAN0_MB18_DATA0()		bfin_read16(CAN0_MB18_DATA0)
+#define bfin_write_CAN0_MB18_DATA0(val)		bfin_write16(CAN0_MB18_DATA0, val)
+#define bfin_read_CAN0_MB18_DATA1()		bfin_read16(CAN0_MB18_DATA1)
+#define bfin_write_CAN0_MB18_DATA1(val)		bfin_write16(CAN0_MB18_DATA1, val)
+#define bfin_read_CAN0_MB18_DATA2()		bfin_read16(CAN0_MB18_DATA2)
+#define bfin_write_CAN0_MB18_DATA2(val)		bfin_write16(CAN0_MB18_DATA2, val)
+#define bfin_read_CAN0_MB18_DATA3()		bfin_read16(CAN0_MB18_DATA3)
+#define bfin_write_CAN0_MB18_DATA3(val)		bfin_write16(CAN0_MB18_DATA3, val)
+#define bfin_read_CAN0_MB18_LENGTH()		bfin_read16(CAN0_MB18_LENGTH)
+#define bfin_write_CAN0_MB18_LENGTH(val)	bfin_write16(CAN0_MB18_LENGTH, val)
+#define bfin_read_CAN0_MB18_TIMESTAMP()		bfin_read16(CAN0_MB18_TIMESTAMP)
+#define bfin_write_CAN0_MB18_TIMESTAMP(val)	bfin_write16(CAN0_MB18_TIMESTAMP, val)
+#define bfin_read_CAN0_MB18_ID0()		bfin_read16(CAN0_MB18_ID0)
+#define bfin_write_CAN0_MB18_ID0(val)		bfin_write16(CAN0_MB18_ID0, val)
+#define bfin_read_CAN0_MB18_ID1()		bfin_read16(CAN0_MB18_ID1)
+#define bfin_write_CAN0_MB18_ID1(val)		bfin_write16(CAN0_MB18_ID1, val)
+#define bfin_read_CAN0_MB19_DATA0()		bfin_read16(CAN0_MB19_DATA0)
+#define bfin_write_CAN0_MB19_DATA0(val)		bfin_write16(CAN0_MB19_DATA0, val)
+#define bfin_read_CAN0_MB19_DATA1()		bfin_read16(CAN0_MB19_DATA1)
+#define bfin_write_CAN0_MB19_DATA1(val)		bfin_write16(CAN0_MB19_DATA1, val)
+#define bfin_read_CAN0_MB19_DATA2()		bfin_read16(CAN0_MB19_DATA2)
+#define bfin_write_CAN0_MB19_DATA2(val)		bfin_write16(CAN0_MB19_DATA2, val)
+#define bfin_read_CAN0_MB19_DATA3()		bfin_read16(CAN0_MB19_DATA3)
+#define bfin_write_CAN0_MB19_DATA3(val)		bfin_write16(CAN0_MB19_DATA3, val)
+#define bfin_read_CAN0_MB19_LENGTH()		bfin_read16(CAN0_MB19_LENGTH)
+#define bfin_write_CAN0_MB19_LENGTH(val)	bfin_write16(CAN0_MB19_LENGTH, val)
+#define bfin_read_CAN0_MB19_TIMESTAMP()		bfin_read16(CAN0_MB19_TIMESTAMP)
+#define bfin_write_CAN0_MB19_TIMESTAMP(val)	bfin_write16(CAN0_MB19_TIMESTAMP, val)
+#define bfin_read_CAN0_MB19_ID0()		bfin_read16(CAN0_MB19_ID0)
+#define bfin_write_CAN0_MB19_ID0(val)		bfin_write16(CAN0_MB19_ID0, val)
+#define bfin_read_CAN0_MB19_ID1()		bfin_read16(CAN0_MB19_ID1)
+#define bfin_write_CAN0_MB19_ID1(val)		bfin_write16(CAN0_MB19_ID1, val)
+#define bfin_read_CAN0_MB20_DATA0()		bfin_read16(CAN0_MB20_DATA0)
+#define bfin_write_CAN0_MB20_DATA0(val)		bfin_write16(CAN0_MB20_DATA0, val)
+#define bfin_read_CAN0_MB20_DATA1()		bfin_read16(CAN0_MB20_DATA1)
+#define bfin_write_CAN0_MB20_DATA1(val)		bfin_write16(CAN0_MB20_DATA1, val)
+#define bfin_read_CAN0_MB20_DATA2()		bfin_read16(CAN0_MB20_DATA2)
+#define bfin_write_CAN0_MB20_DATA2(val)		bfin_write16(CAN0_MB20_DATA2, val)
+#define bfin_read_CAN0_MB20_DATA3()		bfin_read16(CAN0_MB20_DATA3)
+#define bfin_write_CAN0_MB20_DATA3(val)		bfin_write16(CAN0_MB20_DATA3, val)
+#define bfin_read_CAN0_MB20_LENGTH()		bfin_read16(CAN0_MB20_LENGTH)
+#define bfin_write_CAN0_MB20_LENGTH(val)	bfin_write16(CAN0_MB20_LENGTH, val)
+#define bfin_read_CAN0_MB20_TIMESTAMP()		bfin_read16(CAN0_MB20_TIMESTAMP)
+#define bfin_write_CAN0_MB20_TIMESTAMP(val)	bfin_write16(CAN0_MB20_TIMESTAMP, val)
+#define bfin_read_CAN0_MB20_ID0()		bfin_read16(CAN0_MB20_ID0)
+#define bfin_write_CAN0_MB20_ID0(val)		bfin_write16(CAN0_MB20_ID0, val)
+#define bfin_read_CAN0_MB20_ID1()		bfin_read16(CAN0_MB20_ID1)
+#define bfin_write_CAN0_MB20_ID1(val)		bfin_write16(CAN0_MB20_ID1, val)
+#define bfin_read_CAN0_MB21_DATA0()		bfin_read16(CAN0_MB21_DATA0)
+#define bfin_write_CAN0_MB21_DATA0(val)		bfin_write16(CAN0_MB21_DATA0, val)
+#define bfin_read_CAN0_MB21_DATA1()		bfin_read16(CAN0_MB21_DATA1)
+#define bfin_write_CAN0_MB21_DATA1(val)		bfin_write16(CAN0_MB21_DATA1, val)
+#define bfin_read_CAN0_MB21_DATA2()		bfin_read16(CAN0_MB21_DATA2)
+#define bfin_write_CAN0_MB21_DATA2(val)		bfin_write16(CAN0_MB21_DATA2, val)
+#define bfin_read_CAN0_MB21_DATA3()		bfin_read16(CAN0_MB21_DATA3)
+#define bfin_write_CAN0_MB21_DATA3(val)		bfin_write16(CAN0_MB21_DATA3, val)
+#define bfin_read_CAN0_MB21_LENGTH()		bfin_read16(CAN0_MB21_LENGTH)
+#define bfin_write_CAN0_MB21_LENGTH(val)	bfin_write16(CAN0_MB21_LENGTH, val)
+#define bfin_read_CAN0_MB21_TIMESTAMP()		bfin_read16(CAN0_MB21_TIMESTAMP)
+#define bfin_write_CAN0_MB21_TIMESTAMP(val)	bfin_write16(CAN0_MB21_TIMESTAMP, val)
+#define bfin_read_CAN0_MB21_ID0()		bfin_read16(CAN0_MB21_ID0)
+#define bfin_write_CAN0_MB21_ID0(val)		bfin_write16(CAN0_MB21_ID0, val)
+#define bfin_read_CAN0_MB21_ID1()		bfin_read16(CAN0_MB21_ID1)
+#define bfin_write_CAN0_MB21_ID1(val)		bfin_write16(CAN0_MB21_ID1, val)
+#define bfin_read_CAN0_MB22_DATA0()		bfin_read16(CAN0_MB22_DATA0)
+#define bfin_write_CAN0_MB22_DATA0(val)		bfin_write16(CAN0_MB22_DATA0, val)
+#define bfin_read_CAN0_MB22_DATA1()		bfin_read16(CAN0_MB22_DATA1)
+#define bfin_write_CAN0_MB22_DATA1(val)		bfin_write16(CAN0_MB22_DATA1, val)
+#define bfin_read_CAN0_MB22_DATA2()		bfin_read16(CAN0_MB22_DATA2)
+#define bfin_write_CAN0_MB22_DATA2(val)		bfin_write16(CAN0_MB22_DATA2, val)
+#define bfin_read_CAN0_MB22_DATA3()		bfin_read16(CAN0_MB22_DATA3)
+#define bfin_write_CAN0_MB22_DATA3(val)		bfin_write16(CAN0_MB22_DATA3, val)
+#define bfin_read_CAN0_MB22_LENGTH()		bfin_read16(CAN0_MB22_LENGTH)
+#define bfin_write_CAN0_MB22_LENGTH(val)	bfin_write16(CAN0_MB22_LENGTH, val)
+#define bfin_read_CAN0_MB22_TIMESTAMP()		bfin_read16(CAN0_MB22_TIMESTAMP)
+#define bfin_write_CAN0_MB22_TIMESTAMP(val)	bfin_write16(CAN0_MB22_TIMESTAMP, val)
+#define bfin_read_CAN0_MB22_ID0()		bfin_read16(CAN0_MB22_ID0)
+#define bfin_write_CAN0_MB22_ID0(val)		bfin_write16(CAN0_MB22_ID0, val)
+#define bfin_read_CAN0_MB22_ID1()		bfin_read16(CAN0_MB22_ID1)
+#define bfin_write_CAN0_MB22_ID1(val)		bfin_write16(CAN0_MB22_ID1, val)
+#define bfin_read_CAN0_MB23_DATA0()		bfin_read16(CAN0_MB23_DATA0)
+#define bfin_write_CAN0_MB23_DATA0(val)		bfin_write16(CAN0_MB23_DATA0, val)
+#define bfin_read_CAN0_MB23_DATA1()		bfin_read16(CAN0_MB23_DATA1)
+#define bfin_write_CAN0_MB23_DATA1(val)		bfin_write16(CAN0_MB23_DATA1, val)
+#define bfin_read_CAN0_MB23_DATA2()		bfin_read16(CAN0_MB23_DATA2)
+#define bfin_write_CAN0_MB23_DATA2(val)		bfin_write16(CAN0_MB23_DATA2, val)
+#define bfin_read_CAN0_MB23_DATA3()		bfin_read16(CAN0_MB23_DATA3)
+#define bfin_write_CAN0_MB23_DATA3(val)		bfin_write16(CAN0_MB23_DATA3, val)
+#define bfin_read_CAN0_MB23_LENGTH()		bfin_read16(CAN0_MB23_LENGTH)
+#define bfin_write_CAN0_MB23_LENGTH(val)	bfin_write16(CAN0_MB23_LENGTH, val)
+#define bfin_read_CAN0_MB23_TIMESTAMP()		bfin_read16(CAN0_MB23_TIMESTAMP)
+#define bfin_write_CAN0_MB23_TIMESTAMP(val)	bfin_write16(CAN0_MB23_TIMESTAMP, val)
+#define bfin_read_CAN0_MB23_ID0()		bfin_read16(CAN0_MB23_ID0)
+#define bfin_write_CAN0_MB23_ID0(val)		bfin_write16(CAN0_MB23_ID0, val)
+#define bfin_read_CAN0_MB23_ID1()		bfin_read16(CAN0_MB23_ID1)
+#define bfin_write_CAN0_MB23_ID1(val)		bfin_write16(CAN0_MB23_ID1, val)
+#define bfin_read_CAN0_MB24_DATA0()		bfin_read16(CAN0_MB24_DATA0)
+#define bfin_write_CAN0_MB24_DATA0(val)		bfin_write16(CAN0_MB24_DATA0, val)
+#define bfin_read_CAN0_MB24_DATA1()		bfin_read16(CAN0_MB24_DATA1)
+#define bfin_write_CAN0_MB24_DATA1(val)		bfin_write16(CAN0_MB24_DATA1, val)
+#define bfin_read_CAN0_MB24_DATA2()		bfin_read16(CAN0_MB24_DATA2)
+#define bfin_write_CAN0_MB24_DATA2(val)		bfin_write16(CAN0_MB24_DATA2, val)
+#define bfin_read_CAN0_MB24_DATA3()		bfin_read16(CAN0_MB24_DATA3)
+#define bfin_write_CAN0_MB24_DATA3(val)		bfin_write16(CAN0_MB24_DATA3, val)
+#define bfin_read_CAN0_MB24_LENGTH()		bfin_read16(CAN0_MB24_LENGTH)
+#define bfin_write_CAN0_MB24_LENGTH(val)	bfin_write16(CAN0_MB24_LENGTH, val)
+#define bfin_read_CAN0_MB24_TIMESTAMP()		bfin_read16(CAN0_MB24_TIMESTAMP)
+#define bfin_write_CAN0_MB24_TIMESTAMP(val)	bfin_write16(CAN0_MB24_TIMESTAMP, val)
+#define bfin_read_CAN0_MB24_ID0()		bfin_read16(CAN0_MB24_ID0)
+#define bfin_write_CAN0_MB24_ID0(val)		bfin_write16(CAN0_MB24_ID0, val)
+#define bfin_read_CAN0_MB24_ID1()		bfin_read16(CAN0_MB24_ID1)
+#define bfin_write_CAN0_MB24_ID1(val)		bfin_write16(CAN0_MB24_ID1, val)
+#define bfin_read_CAN0_MB25_DATA0()		bfin_read16(CAN0_MB25_DATA0)
+#define bfin_write_CAN0_MB25_DATA0(val)		bfin_write16(CAN0_MB25_DATA0, val)
+#define bfin_read_CAN0_MB25_DATA1()		bfin_read16(CAN0_MB25_DATA1)
+#define bfin_write_CAN0_MB25_DATA1(val)		bfin_write16(CAN0_MB25_DATA1, val)
+#define bfin_read_CAN0_MB25_DATA2()		bfin_read16(CAN0_MB25_DATA2)
+#define bfin_write_CAN0_MB25_DATA2(val)		bfin_write16(CAN0_MB25_DATA2, val)
+#define bfin_read_CAN0_MB25_DATA3()		bfin_read16(CAN0_MB25_DATA3)
+#define bfin_write_CAN0_MB25_DATA3(val)		bfin_write16(CAN0_MB25_DATA3, val)
+#define bfin_read_CAN0_MB25_LENGTH()		bfin_read16(CAN0_MB25_LENGTH)
+#define bfin_write_CAN0_MB25_LENGTH(val)	bfin_write16(CAN0_MB25_LENGTH, val)
+#define bfin_read_CAN0_MB25_TIMESTAMP()		bfin_read16(CAN0_MB25_TIMESTAMP)
+#define bfin_write_CAN0_MB25_TIMESTAMP(val)	bfin_write16(CAN0_MB25_TIMESTAMP, val)
+#define bfin_read_CAN0_MB25_ID0()		bfin_read16(CAN0_MB25_ID0)
+#define bfin_write_CAN0_MB25_ID0(val)		bfin_write16(CAN0_MB25_ID0, val)
+#define bfin_read_CAN0_MB25_ID1()		bfin_read16(CAN0_MB25_ID1)
+#define bfin_write_CAN0_MB25_ID1(val)		bfin_write16(CAN0_MB25_ID1, val)
+#define bfin_read_CAN0_MB26_DATA0()		bfin_read16(CAN0_MB26_DATA0)
+#define bfin_write_CAN0_MB26_DATA0(val)		bfin_write16(CAN0_MB26_DATA0, val)
+#define bfin_read_CAN0_MB26_DATA1()		bfin_read16(CAN0_MB26_DATA1)
+#define bfin_write_CAN0_MB26_DATA1(val)		bfin_write16(CAN0_MB26_DATA1, val)
+#define bfin_read_CAN0_MB26_DATA2()		bfin_read16(CAN0_MB26_DATA2)
+#define bfin_write_CAN0_MB26_DATA2(val)		bfin_write16(CAN0_MB26_DATA2, val)
+#define bfin_read_CAN0_MB26_DATA3()		bfin_read16(CAN0_MB26_DATA3)
+#define bfin_write_CAN0_MB26_DATA3(val)		bfin_write16(CAN0_MB26_DATA3, val)
+#define bfin_read_CAN0_MB26_LENGTH()		bfin_read16(CAN0_MB26_LENGTH)
+#define bfin_write_CAN0_MB26_LENGTH(val)	bfin_write16(CAN0_MB26_LENGTH, val)
+#define bfin_read_CAN0_MB26_TIMESTAMP()		bfin_read16(CAN0_MB26_TIMESTAMP)
+#define bfin_write_CAN0_MB26_TIMESTAMP(val)	bfin_write16(CAN0_MB26_TIMESTAMP, val)
+#define bfin_read_CAN0_MB26_ID0()		bfin_read16(CAN0_MB26_ID0)
+#define bfin_write_CAN0_MB26_ID0(val)		bfin_write16(CAN0_MB26_ID0, val)
+#define bfin_read_CAN0_MB26_ID1()		bfin_read16(CAN0_MB26_ID1)
+#define bfin_write_CAN0_MB26_ID1(val)		bfin_write16(CAN0_MB26_ID1, val)
+#define bfin_read_CAN0_MB27_DATA0()		bfin_read16(CAN0_MB27_DATA0)
+#define bfin_write_CAN0_MB27_DATA0(val)		bfin_write16(CAN0_MB27_DATA0, val)
+#define bfin_read_CAN0_MB27_DATA1()		bfin_read16(CAN0_MB27_DATA1)
+#define bfin_write_CAN0_MB27_DATA1(val)		bfin_write16(CAN0_MB27_DATA1, val)
+#define bfin_read_CAN0_MB27_DATA2()		bfin_read16(CAN0_MB27_DATA2)
+#define bfin_write_CAN0_MB27_DATA2(val)		bfin_write16(CAN0_MB27_DATA2, val)
+#define bfin_read_CAN0_MB27_DATA3()		bfin_read16(CAN0_MB27_DATA3)
+#define bfin_write_CAN0_MB27_DATA3(val)		bfin_write16(CAN0_MB27_DATA3, val)
+#define bfin_read_CAN0_MB27_LENGTH()		bfin_read16(CAN0_MB27_LENGTH)
+#define bfin_write_CAN0_MB27_LENGTH(val)	bfin_write16(CAN0_MB27_LENGTH, val)
+#define bfin_read_CAN0_MB27_TIMESTAMP()		bfin_read16(CAN0_MB27_TIMESTAMP)
+#define bfin_write_CAN0_MB27_TIMESTAMP(val)	bfin_write16(CAN0_MB27_TIMESTAMP, val)
+#define bfin_read_CAN0_MB27_ID0()		bfin_read16(CAN0_MB27_ID0)
+#define bfin_write_CAN0_MB27_ID0(val)		bfin_write16(CAN0_MB27_ID0, val)
+#define bfin_read_CAN0_MB27_ID1()		bfin_read16(CAN0_MB27_ID1)
+#define bfin_write_CAN0_MB27_ID1(val)		bfin_write16(CAN0_MB27_ID1, val)
+#define bfin_read_CAN0_MB28_DATA0()		bfin_read16(CAN0_MB28_DATA0)
+#define bfin_write_CAN0_MB28_DATA0(val)		bfin_write16(CAN0_MB28_DATA0, val)
+#define bfin_read_CAN0_MB28_DATA1()		bfin_read16(CAN0_MB28_DATA1)
+#define bfin_write_CAN0_MB28_DATA1(val)		bfin_write16(CAN0_MB28_DATA1, val)
+#define bfin_read_CAN0_MB28_DATA2()		bfin_read16(CAN0_MB28_DATA2)
+#define bfin_write_CAN0_MB28_DATA2(val)		bfin_write16(CAN0_MB28_DATA2, val)
+#define bfin_read_CAN0_MB28_DATA3()		bfin_read16(CAN0_MB28_DATA3)
+#define bfin_write_CAN0_MB28_DATA3(val)		bfin_write16(CAN0_MB28_DATA3, val)
+#define bfin_read_CAN0_MB28_LENGTH()		bfin_read16(CAN0_MB28_LENGTH)
+#define bfin_write_CAN0_MB28_LENGTH(val)	bfin_write16(CAN0_MB28_LENGTH, val)
+#define bfin_read_CAN0_MB28_TIMESTAMP()		bfin_read16(CAN0_MB28_TIMESTAMP)
+#define bfin_write_CAN0_MB28_TIMESTAMP(val)	bfin_write16(CAN0_MB28_TIMESTAMP, val)
+#define bfin_read_CAN0_MB28_ID0()		bfin_read16(CAN0_MB28_ID0)
+#define bfin_write_CAN0_MB28_ID0(val)		bfin_write16(CAN0_MB28_ID0, val)
+#define bfin_read_CAN0_MB28_ID1()		bfin_read16(CAN0_MB28_ID1)
+#define bfin_write_CAN0_MB28_ID1(val)		bfin_write16(CAN0_MB28_ID1, val)
+#define bfin_read_CAN0_MB29_DATA0()		bfin_read16(CAN0_MB29_DATA0)
+#define bfin_write_CAN0_MB29_DATA0(val)		bfin_write16(CAN0_MB29_DATA0, val)
+#define bfin_read_CAN0_MB29_DATA1()		bfin_read16(CAN0_MB29_DATA1)
+#define bfin_write_CAN0_MB29_DATA1(val)		bfin_write16(CAN0_MB29_DATA1, val)
+#define bfin_read_CAN0_MB29_DATA2()		bfin_read16(CAN0_MB29_DATA2)
+#define bfin_write_CAN0_MB29_DATA2(val)		bfin_write16(CAN0_MB29_DATA2, val)
+#define bfin_read_CAN0_MB29_DATA3()		bfin_read16(CAN0_MB29_DATA3)
+#define bfin_write_CAN0_MB29_DATA3(val)		bfin_write16(CAN0_MB29_DATA3, val)
+#define bfin_read_CAN0_MB29_LENGTH()		bfin_read16(CAN0_MB29_LENGTH)
+#define bfin_write_CAN0_MB29_LENGTH(val)	bfin_write16(CAN0_MB29_LENGTH, val)
+#define bfin_read_CAN0_MB29_TIMESTAMP()		bfin_read16(CAN0_MB29_TIMESTAMP)
+#define bfin_write_CAN0_MB29_TIMESTAMP(val)	bfin_write16(CAN0_MB29_TIMESTAMP, val)
+#define bfin_read_CAN0_MB29_ID0()		bfin_read16(CAN0_MB29_ID0)
+#define bfin_write_CAN0_MB29_ID0(val)		bfin_write16(CAN0_MB29_ID0, val)
+#define bfin_read_CAN0_MB29_ID1()		bfin_read16(CAN0_MB29_ID1)
+#define bfin_write_CAN0_MB29_ID1(val)		bfin_write16(CAN0_MB29_ID1, val)
+#define bfin_read_CAN0_MB30_DATA0()		bfin_read16(CAN0_MB30_DATA0)
+#define bfin_write_CAN0_MB30_DATA0(val)		bfin_write16(CAN0_MB30_DATA0, val)
+#define bfin_read_CAN0_MB30_DATA1()		bfin_read16(CAN0_MB30_DATA1)
+#define bfin_write_CAN0_MB30_DATA1(val)		bfin_write16(CAN0_MB30_DATA1, val)
+#define bfin_read_CAN0_MB30_DATA2()		bfin_read16(CAN0_MB30_DATA2)
+#define bfin_write_CAN0_MB30_DATA2(val)		bfin_write16(CAN0_MB30_DATA2, val)
+#define bfin_read_CAN0_MB30_DATA3()		bfin_read16(CAN0_MB30_DATA3)
+#define bfin_write_CAN0_MB30_DATA3(val)		bfin_write16(CAN0_MB30_DATA3, val)
+#define bfin_read_CAN0_MB30_LENGTH()		bfin_read16(CAN0_MB30_LENGTH)
+#define bfin_write_CAN0_MB30_LENGTH(val)	bfin_write16(CAN0_MB30_LENGTH, val)
+#define bfin_read_CAN0_MB30_TIMESTAMP()		bfin_read16(CAN0_MB30_TIMESTAMP)
+#define bfin_write_CAN0_MB30_TIMESTAMP(val)	bfin_write16(CAN0_MB30_TIMESTAMP, val)
+#define bfin_read_CAN0_MB30_ID0()		bfin_read16(CAN0_MB30_ID0)
+#define bfin_write_CAN0_MB30_ID0(val)		bfin_write16(CAN0_MB30_ID0, val)
+#define bfin_read_CAN0_MB30_ID1()		bfin_read16(CAN0_MB30_ID1)
+#define bfin_write_CAN0_MB30_ID1(val)		bfin_write16(CAN0_MB30_ID1, val)
+#define bfin_read_CAN0_MB31_DATA0()		bfin_read16(CAN0_MB31_DATA0)
+#define bfin_write_CAN0_MB31_DATA0(val)		bfin_write16(CAN0_MB31_DATA0, val)
+#define bfin_read_CAN0_MB31_DATA1()		bfin_read16(CAN0_MB31_DATA1)
+#define bfin_write_CAN0_MB31_DATA1(val)		bfin_write16(CAN0_MB31_DATA1, val)
+#define bfin_read_CAN0_MB31_DATA2()		bfin_read16(CAN0_MB31_DATA2)
+#define bfin_write_CAN0_MB31_DATA2(val)		bfin_write16(CAN0_MB31_DATA2, val)
+#define bfin_read_CAN0_MB31_DATA3()		bfin_read16(CAN0_MB31_DATA3)
+#define bfin_write_CAN0_MB31_DATA3(val)		bfin_write16(CAN0_MB31_DATA3, val)
+#define bfin_read_CAN0_MB31_LENGTH()		bfin_read16(CAN0_MB31_LENGTH)
+#define bfin_write_CAN0_MB31_LENGTH(val)	bfin_write16(CAN0_MB31_LENGTH, val)
+#define bfin_read_CAN0_MB31_TIMESTAMP()		bfin_read16(CAN0_MB31_TIMESTAMP)
+#define bfin_write_CAN0_MB31_TIMESTAMP(val)	bfin_write16(CAN0_MB31_TIMESTAMP, val)
+#define bfin_read_CAN0_MB31_ID0()		bfin_read16(CAN0_MB31_ID0)
+#define bfin_write_CAN0_MB31_ID0(val)		bfin_write16(CAN0_MB31_ID0, val)
+#define bfin_read_CAN0_MB31_ID1()		bfin_read16(CAN0_MB31_ID1)
+#define bfin_write_CAN0_MB31_ID1(val)		bfin_write16(CAN0_MB31_ID1, val)
+
+/* UART3 Registers */
+
+#define bfin_read_UART3_DLL()		bfin_read16(UART3_DLL)
+#define bfin_write_UART3_DLL(val)	bfin_write16(UART3_DLL, val)
+#define bfin_read_UART3_DLH()		bfin_read16(UART3_DLH)
+#define bfin_write_UART3_DLH(val)	bfin_write16(UART3_DLH, val)
+#define bfin_read_UART3_GCTL()		bfin_read16(UART3_GCTL)
+#define bfin_write_UART3_GCTL(val)	bfin_write16(UART3_GCTL, val)
+#define bfin_read_UART3_LCR()		bfin_read16(UART3_LCR)
+#define bfin_write_UART3_LCR(val)	bfin_write16(UART3_LCR, val)
+#define bfin_read_UART3_MCR()		bfin_read16(UART3_MCR)
+#define bfin_write_UART3_MCR(val)	bfin_write16(UART3_MCR, val)
+#define bfin_read_UART3_LSR()		bfin_read16(UART3_LSR)
+#define bfin_write_UART3_LSR(val)	bfin_write16(UART3_LSR, val)
+#define bfin_read_UART3_MSR()		bfin_read16(UART3_MSR)
+#define bfin_write_UART3_MSR(val)	bfin_write16(UART3_MSR, val)
+#define bfin_read_UART3_SCR()		bfin_read16(UART3_SCR)
+#define bfin_write_UART3_SCR(val)	bfin_write16(UART3_SCR, val)
+#define bfin_read_UART3_IER_SET()	bfin_read16(UART3_IER_SET)
+#define bfin_write_UART3_IER_SET(val)	bfin_write16(UART3_IER_SET, val)
+#define bfin_read_UART3_IER_CLEAR()	bfin_read16(UART3_IER_CLEAR)
+#define bfin_write_UART3_IER_CLEAR(val)	bfin_write16(UART3_IER_CLEAR, val)
+#define bfin_read_UART3_THR()		bfin_read16(UART3_THR)
+#define bfin_write_UART3_THR(val)	bfin_write16(UART3_THR, val)
+#define bfin_read_UART3_RBR()		bfin_read16(UART3_RBR)
+#define bfin_write_UART3_RBR(val)	bfin_write16(UART3_RBR, val)
+
+/* NFC Registers */
+
+#define bfin_read_NFC_CTL()		bfin_read16(NFC_CTL)
+#define bfin_write_NFC_CTL(val)		bfin_write16(NFC_CTL, val)
+#define bfin_read_NFC_STAT()		bfin_read16(NFC_STAT)
+#define bfin_write_NFC_STAT(val)	bfin_write16(NFC_STAT, val)
+#define bfin_read_NFC_IRQSTAT()		bfin_read16(NFC_IRQSTAT)
+#define bfin_write_NFC_IRQSTAT(val)	bfin_write16(NFC_IRQSTAT, val)
+#define bfin_read_NFC_IRQMASK()		bfin_read16(NFC_IRQMASK)
+#define bfin_write_NFC_IRQMASK(val)	bfin_write16(NFC_IRQMASK, val)
+#define bfin_read_NFC_ECC0()		bfin_read16(NFC_ECC0)
+#define bfin_write_NFC_ECC0(val)	bfin_write16(NFC_ECC0, val)
+#define bfin_read_NFC_ECC1()		bfin_read16(NFC_ECC1)
+#define bfin_write_NFC_ECC1(val)	bfin_write16(NFC_ECC1, val)
+#define bfin_read_NFC_ECC2()		bfin_read16(NFC_ECC2)
+#define bfin_write_NFC_ECC2(val)	bfin_write16(NFC_ECC2, val)
+#define bfin_read_NFC_ECC3()		bfin_read16(NFC_ECC3)
+#define bfin_write_NFC_ECC3(val)	bfin_write16(NFC_ECC3, val)
+#define bfin_read_NFC_COUNT()		bfin_read16(NFC_COUNT)
+#define bfin_write_NFC_COUNT(val)	bfin_write16(NFC_COUNT, val)
+#define bfin_read_NFC_RST()		bfin_read16(NFC_RST)
+#define bfin_write_NFC_RST(val)		bfin_write16(NFC_RST, val)
+#define bfin_read_NFC_PGCTL()		bfin_read16(NFC_PGCTL)
+#define bfin_write_NFC_PGCTL(val)	bfin_write16(NFC_PGCTL, val)
+#define bfin_read_NFC_READ()		bfin_read16(NFC_READ)
+#define bfin_write_NFC_READ(val)	bfin_write16(NFC_READ, val)
+#define bfin_read_NFC_ADDR()		bfin_read16(NFC_ADDR)
+#define bfin_write_NFC_ADDR(val)	bfin_write16(NFC_ADDR, val)
+#define bfin_read_NFC_CMD()		bfin_read16(NFC_CMD)
+#define bfin_write_NFC_CMD(val)		bfin_write16(NFC_CMD, val)
+#define bfin_read_NFC_DATA_WR()		bfin_read16(NFC_DATA_WR)
+#define bfin_write_NFC_DATA_WR(val)	bfin_write16(NFC_DATA_WR, val)
+#define bfin_read_NFC_DATA_RD()		bfin_read16(NFC_DATA_RD)
+#define bfin_write_NFC_DATA_RD(val)	bfin_write16(NFC_DATA_RD, val)
+
+/* Counter Registers */
+
+#define bfin_read_CNT_CONFIG()		bfin_read16(CNT_CONFIG)
+#define bfin_write_CNT_CONFIG(val)	bfin_write16(CNT_CONFIG, val)
+#define bfin_read_CNT_IMASK()		bfin_read16(CNT_IMASK)
+#define bfin_write_CNT_IMASK(val)	bfin_write16(CNT_IMASK, val)
+#define bfin_read_CNT_STATUS()		bfin_read16(CNT_STATUS)
+#define bfin_write_CNT_STATUS(val)	bfin_write16(CNT_STATUS, val)
+#define bfin_read_CNT_COMMAND()		bfin_read16(CNT_COMMAND)
+#define bfin_write_CNT_COMMAND(val)	bfin_write16(CNT_COMMAND, val)
+#define bfin_read_CNT_DEBOUNCE()	bfin_read16(CNT_DEBOUNCE)
+#define bfin_write_CNT_DEBOUNCE(val)	bfin_write16(CNT_DEBOUNCE, val)
+#define bfin_read_CNT_COUNTER()		bfin_read32(CNT_COUNTER)
+#define bfin_write_CNT_COUNTER(val)	bfin_write32(CNT_COUNTER, val)
+#define bfin_read_CNT_MAX()		bfin_read32(CNT_MAX)
+#define bfin_write_CNT_MAX(val)		bfin_write32(CNT_MAX, val)
+#define bfin_read_CNT_MIN()		bfin_read32(CNT_MIN)
+#define bfin_write_CNT_MIN(val)		bfin_write32(CNT_MIN, val)
+
+/* OTP/FUSE Registers */
+
+#define bfin_read_OTP_CONTROL()		bfin_read16(OTP_CONTROL)
+#define bfin_write_OTP_CONTROL(val)	bfin_write16(OTP_CONTROL, val)
+#define bfin_read_OTP_BEN()		bfin_read16(OTP_BEN)
+#define bfin_write_OTP_BEN(val)		bfin_write16(OTP_BEN, val)
+#define bfin_read_OTP_STATUS()		bfin_read16(OTP_STATUS)
+#define bfin_write_OTP_STATUS(val)	bfin_write16(OTP_STATUS, val)
+#define bfin_read_OTP_TIMING()		bfin_read32(OTP_TIMING)
+#define bfin_write_OTP_TIMING(val)	bfin_write32(OTP_TIMING, val)
+
+/* Security Registers */
+
+#define bfin_read_SECURE_SYSSWT()	bfin_read32(SECURE_SYSSWT)
+#define bfin_write_SECURE_SYSSWT(val)	bfin_write32(SECURE_SYSSWT, val)
+#define bfin_read_SECURE_CONTROL()	bfin_read16(SECURE_CONTROL)
+#define bfin_write_SECURE_CONTROL(val)	bfin_write16(SECURE_CONTROL, val)
+#define bfin_read_SECURE_STATUS()	bfin_read16(SECURE_STATUS)
+#define bfin_write_SECURE_STATUS(val)	bfin_write16(SECURE_STATUS, val)
+
+/* DMA Peribfin_read_()heral Mux Register */
+
+#define bfin_read_DMAC1_PERIMUX()	bfin_read16(DMAC1_PERIMUX)
+#define bfin_write_DMAC1_PERIMUX(val)	bfin_write16(DMAC1_PERIMUX, val)
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define bfin_read_OTP_DATA0()		bfin_read32(OTP_DATA0)
+#define bfin_write_OTP_DATA0(val)	bfin_write32(OTP_DATA0, val)
+#define bfin_read_OTP_DATA1()		bfin_read32(OTP_DATA1)
+#define bfin_write_OTP_DATA1(val)	bfin_write32(OTP_DATA1, val)
+#define bfin_read_OTP_DATA2()		bfin_read32(OTP_DATA2)
+#define bfin_write_OTP_DATA2(val)	bfin_write32(OTP_DATA2, val)
+#define bfin_read_OTP_DATA3()		bfin_read32(OTP_DATA3)
+#define bfin_write_OTP_DATA3(val)	bfin_write32(OTP_DATA3, val)
+
+/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 bfin_read_()rocessor */
+
+/* legacy definitions */
+#define bfin_read_EBIU_AMCBCTL0		bfin_read_EBIU_AMBCTL0
+#define bfin_write_EBIU_AMCBCTL0	bfin_write_EBIU_AMBCTL0
+#define bfin_read_EBIU_AMCBCTL1		bfin_read_EBIU_AMBCTL1
+#define bfin_write_EBIU_AMCBCTL1	bfin_write_EBIU_AMBCTL1
+#define bfin_read_PINT0_IRQ		bfin_read_PINT0_REQUEST
+#define bfin_write_PINT0_IRQ		bfin_write_PINT0_REQUEST
+#define bfin_read_PINT1_IRQ		bfin_read_PINT1_REQUEST
+#define bfin_write_PINT1_IRQ		bfin_write_PINT1_REQUEST
+#define bfin_read_PINT2_IRQ		bfin_read_PINT2_REQUEST
+#define bfin_write_PINT2_IRQ		bfin_write_PINT2_REQUEST
+#define bfin_read_PINT3_IRQ		bfin_read_PINT3_REQUEST
+#define bfin_write_PINT3_IRQ		bfin_write_PINT3_REQUEST
+
+#endif /* _CDEF_BF54X_H */
+
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
new file mode 100644
index 00000000000..b1316541b8d
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -0,0 +1,925 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/defBF542.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF542_H
+#define _DEF_BF542_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF542 that are not in the common header */
+
+/* ATAPI Registers */
+
+#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
+#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
+#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
+#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
+#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
+#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
+#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
+#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
+#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
+#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
+#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
+#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
+#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
+#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
+#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
+#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
+#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
+#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
+#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
+#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
+#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
+#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
+#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
+
+/* SDH Registers */
+
+#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
+#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
+#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
+#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
+#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
+#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
+#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
+#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
+#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
+#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
+#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
+#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
+#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
+#define                       SDH_STATUS  0xffc03934   /* SDH Status */
+#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
+#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
+#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
+#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
+#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
+#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
+#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
+#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
+#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
+#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
+#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
+#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
+#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
+#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
+#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
+#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
+#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03c00   /* Function address register */
+#define                        USB_POWER  0xffc03c04   /* Power management register */
+#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03c20   /* USB frame number */
+#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
+#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
+#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+
+/* USB Endpoint 1 Control Registers */
+
+#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+
+/* USB Endpoint 2 Control Registers */
+
+#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+
+/* USB Endpoint 3 Control Registers */
+
+#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+
+/* USB Endpoint 4 Control Registers */
+
+#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+
+/* USB Endpoint 5 Control Registers */
+
+#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+
+/* USB Endpoint 6 Control Registers */
+
+#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
+#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+
+/* USB Endpoint 7 Control Registers */
+
+#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Keypad Registers */
+
+#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
+#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
+#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
+#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
+#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
+#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for KPAD_CTL */
+
+#define                   KPAD_EN  0x1        /* Keypad Enable */
+#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
+#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
+#define                KPAD_COLEN  0xe000     /* Column Enable Width */
+
+/* Bit masks for KPAD_PRESCALE */
+
+#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
+
+/* Bit masks for KPAD_MSEL */
+
+#define                DBON_SCALE  0xff       /* Debounce Scale Value */
+#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
+
+/* Bit masks for KPAD_ROWCOL */
+
+#define                  KPAD_ROW  0xff       /* Rows Pressed */
+#define                  KPAD_COL  0xff00     /* Columns Pressed */
+
+/* Bit masks for KPAD_STAT */
+
+#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
+#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
+#define              KPAD_PRESSED  0x8        /* Key press current status */
+
+/* Bit masks for KPAD_SOFTEVAL */
+
+#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
+
+/* Bit masks for SDH_COMMAND */
+
+#define                   CMD_IDX  0x3f       /* Command Index */
+#define                   CMD_RSP  0x40       /* Response */
+#define                 CMD_L_RSP  0x80       /* Long Response */
+#define                 CMD_INT_E  0x100      /* Command Interrupt */
+#define                CMD_PEND_E  0x200      /* Command Pending */
+#define                     CMD_E  0x400      /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define                    PWR_ON  0x3        /* Power On */
+#if 0
+#define                       TBD  0x3c       /* TBD */
+#endif
+#define                 SD_CMD_OD  0x40       /* Open Drain Output */
+#define                   ROD_CTL  0x80       /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define                    CLKDIV  0xff       /* MC_CLK Divisor */
+#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
+#define                  PWR_SV_E  0x200      /* Power Save Enable */
+#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
+#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define                  RESP_CMD  0x3f       /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define                     DTX_E  0x1        /* Data Transfer Enable */
+#define                   DTX_DIR  0x2        /* Data Transfer Direction */
+#define                  DTX_MODE  0x4        /* Data Transfer Mode */
+#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
+#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
+#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
+#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
+#define                RX_OVERRUN  0x20       /* Receive Overrun */
+#define              CMD_RESP_END  0x40       /* CMD Response End */
+#define                  CMD_SENT  0x80       /* CMD Sent */
+#define                   DAT_END  0x100      /* Data End */
+#define             START_BIT_ERR  0x200      /* Start Bit Error */
+#define               DAT_BLK_END  0x400      /* Data Block End */
+#define                   CMD_ACT  0x800      /* CMD Active */
+#define                    TX_ACT  0x1000     /* Transmit Active */
+#define                    RX_ACT  0x2000     /* Receive Active */
+#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
+#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
+#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
+#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
+#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
+#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
+#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
+#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
+#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
+#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
+#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
+#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
+#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
+#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
+#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
+#define              DAT_END_STAT  0x100      /* Data End Status */
+#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
+#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
+#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
+#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
+#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
+#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
+#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
+#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
+#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
+#define              DAT_END_MASK  0x100      /* Data End Mask */
+#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
+#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
+#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
+#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
+#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
+#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
+#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
+#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
+#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
+#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
+#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
+#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
+#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define                FIFO_COUNT  0x7fff     /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
+#define               SD_CARD_DET  0x10       /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
+#define                   SCD_MSK  0x40       /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define                   CLKS_EN  0x1        /* Clocks Enable */
+#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
+#define                       MWE  0x8        /* Moving Window Enable */
+#define                    SD_RST  0x10       /* SDMMC Reset */
+#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
+#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
+#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define                       RWR  0x1        /* Read Wait Request */
+
+/* Bit masks for ATAPI_CONTROL */
+
+#define                 PIO_START  0x1        /* Start PIO/Reg Op */
+#define               MULTI_START  0x2        /* Start Multi-DMA Op */
+#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
+#define                  XFER_DIR  0x8        /* Transfer Direction */
+#define                  IORDY_EN  0x10       /* IORDY Enable */
+#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
+#define                  SOFT_RST  0x40       /* Soft Reset */
+#define                   DEV_RST  0x80       /* Device Reset */
+#define                TFRCNT_RST  0x100      /* Trans Count Reset */
+#define               END_ON_TERM  0x200      /* End/Terminate Select */
+#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
+#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
+
+/* Bit masks for ATAPI_STATUS */
+
+#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
+#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
+#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
+#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
+
+/* Bit masks for ATAPI_DEV_ADDR */
+
+#define                  DEV_ADDR  0x1f       /* Device Address */
+
+/* Bit masks for ATAPI_INT_MASK */
+
+#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
+#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
+#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
+#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
+#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
+#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
+#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
+#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
+#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
+
+/* Bit masks for ATAPI_INT_STATUS */
+
+#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
+#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
+#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
+#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
+#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
+#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
+#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
+#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
+#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
+
+/* Bit masks for ATAPI_LINE_STATUS */
+
+#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
+#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
+#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
+#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
+#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
+#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
+#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
+#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
+#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
+#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_SM_STATE */
+
+#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
+#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
+#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
+#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_TERMINATE */
+
+#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
+
+/* Bit masks for ATAPI_REG_TIM_0 */
+
+#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
+#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
+
+/* Bit masks for ATAPI_PIO_TIM_0 */
+
+#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
+#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
+#define                    T4_REG  0xf000     /* DIOW data hold */
+
+/* Bit masks for ATAPI_PIO_TIM_1 */
+
+#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
+
+/* Bit masks for ATAPI_MULTI_TIM_0 */
+
+#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
+#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
+
+/* Bit masks for ATAPI_MULTI_TIM_1 */
+
+#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
+#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
+
+/* Bit masks for ATAPI_MULTI_TIM_2 */
+
+#define                        TH  0xff       /* Selects DIOW data hold */
+#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
+
+/* Bit masks for ATAPI_ULTRA_TIM_0 */
+
+#define                      TACK  0xff       /* Selects setup and hold times for TACK */
+#define                      TENV  0xff00     /* Selects envelope time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_1 */
+
+#define                      TDVS  0xff       /* Selects data valid setup time */
+#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_2 */
+
+#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define                      TMLI  0xff00     /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define                      TZAH  0xff       /* Selects minimum delay required for output */
+#define               READY_PAUSE  0xff00     /* Selects ready to pause */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define                     RESET  0x8        /* Reset indicator */
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                      MODE  0x4        /* DMA Bus error */
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+
+#endif /* _DEF_BF542_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
new file mode 100644
index 00000000000..c2c785bdc5f
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -0,0 +1,707 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/defBF544.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF544_H
+#define _DEF_BF544_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF544 that are not in the common header */
+
+/* Timer Registers */
+
+#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
+#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
+#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
+#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
+#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
+#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
+#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
+#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
+#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
+#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
+#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
+#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
+
+/* Timer Group of 3 Registers */
+
+#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
+#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
+#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
+
+/* EPPI0 Registers */
+
+#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
+#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
+#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
+#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
+#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
+#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
+#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
+#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
+#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
+#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
+#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
+#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
+#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define                     TWI1_REGBASE  0xffc02200
+#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
+#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
+#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
+#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
+#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
+#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
+#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
+#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
+#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
+#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define                         CAN1_MC1  0xffc03200   /* CAN Controller 1 Mailbox Configuration Register 1 */
+#define                         CAN1_MD1  0xffc03204   /* CAN Controller 1 Mailbox Direction Register 1 */
+#define                        CAN1_TRS1  0xffc03208   /* CAN Controller 1 Transmit Request Set Register 1 */
+#define                        CAN1_TRR1  0xffc0320c   /* CAN Controller 1 Transmit Request Reset Register 1 */
+#define                         CAN1_TA1  0xffc03210   /* CAN Controller 1 Transmit Acknowledge Register 1 */
+#define                         CAN1_AA1  0xffc03214   /* CAN Controller 1 Abort Acknowledge Register 1 */
+#define                        CAN1_RMP1  0xffc03218   /* CAN Controller 1 Receive Message Pending Register 1 */
+#define                        CAN1_RML1  0xffc0321c   /* CAN Controller 1 Receive Message Lost Register 1 */
+#define                      CAN1_MBTIF1  0xffc03220   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
+#define                      CAN1_MBRIF1  0xffc03224   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
+#define                       CAN1_MBIM1  0xffc03228   /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
+#define                        CAN1_RFH1  0xffc0322c   /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
+#define                       CAN1_OPSS1  0xffc03230   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define                         CAN1_MC2  0xffc03240   /* CAN Controller 1 Mailbox Configuration Register 2 */
+#define                         CAN1_MD2  0xffc03244   /* CAN Controller 1 Mailbox Direction Register 2 */
+#define                        CAN1_TRS2  0xffc03248   /* CAN Controller 1 Transmit Request Set Register 2 */
+#define                        CAN1_TRR2  0xffc0324c   /* CAN Controller 1 Transmit Request Reset Register 2 */
+#define                         CAN1_TA2  0xffc03250   /* CAN Controller 1 Transmit Acknowledge Register 2 */
+#define                         CAN1_AA2  0xffc03254   /* CAN Controller 1 Abort Acknowledge Register 2 */
+#define                        CAN1_RMP2  0xffc03258   /* CAN Controller 1 Receive Message Pending Register 2 */
+#define                        CAN1_RML2  0xffc0325c   /* CAN Controller 1 Receive Message Lost Register 2 */
+#define                      CAN1_MBTIF2  0xffc03260   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
+#define                      CAN1_MBRIF2  0xffc03264   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
+#define                       CAN1_MBIM2  0xffc03268   /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
+#define                        CAN1_RFH2  0xffc0326c   /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
+#define                       CAN1_OPSS2  0xffc03270   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
+
+/* CAN Controller 1 Clock/Interrupt/Counter Registers */
+
+#define                       CAN1_CLOCK  0xffc03280   /* CAN Controller 1 Clock Register */
+#define                      CAN1_TIMING  0xffc03284   /* CAN Controller 1 Timing Register */
+#define                       CAN1_DEBUG  0xffc03288   /* CAN Controller 1 Debug Register */
+#define                      CAN1_STATUS  0xffc0328c   /* CAN Controller 1 Global Status Register */
+#define                         CAN1_CEC  0xffc03290   /* CAN Controller 1 Error Counter Register */
+#define                         CAN1_GIS  0xffc03294   /* CAN Controller 1 Global Interrupt Status Register */
+#define                         CAN1_GIM  0xffc03298   /* CAN Controller 1 Global Interrupt Mask Register */
+#define                         CAN1_GIF  0xffc0329c   /* CAN Controller 1 Global Interrupt Flag Register */
+#define                     CAN1_CONTROL  0xffc032a0   /* CAN Controller 1 Master Control Register */
+#define                        CAN1_INTR  0xffc032a4   /* CAN Controller 1 Interrupt Pending Register */
+#define                        CAN1_MBTD  0xffc032ac   /* CAN Controller 1 Mailbox Temporary Disable Register */
+#define                         CAN1_EWR  0xffc032b0   /* CAN Controller 1 Programmable Warning Level Register */
+#define                         CAN1_ESR  0xffc032b4   /* CAN Controller 1 Error Status Register */
+#define                       CAN1_UCCNT  0xffc032c4   /* CAN Controller 1 Universal Counter Register */
+#define                        CAN1_UCRC  0xffc032c8   /* CAN Controller 1 Universal Counter Force Reload Register */
+#define                       CAN1_UCCNF  0xffc032cc   /* CAN Controller 1 Universal Counter Configuration Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM00L  0xffc03300   /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
+#define                       CAN1_AM00H  0xffc03304   /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
+#define                       CAN1_AM01L  0xffc03308   /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
+#define                       CAN1_AM01H  0xffc0330c   /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
+#define                       CAN1_AM02L  0xffc03310   /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
+#define                       CAN1_AM02H  0xffc03314   /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
+#define                       CAN1_AM03L  0xffc03318   /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
+#define                       CAN1_AM03H  0xffc0331c   /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
+#define                       CAN1_AM04L  0xffc03320   /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
+#define                       CAN1_AM04H  0xffc03324   /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
+#define                       CAN1_AM05L  0xffc03328   /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
+#define                       CAN1_AM05H  0xffc0332c   /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
+#define                       CAN1_AM06L  0xffc03330   /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
+#define                       CAN1_AM06H  0xffc03334   /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
+#define                       CAN1_AM07L  0xffc03338   /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
+#define                       CAN1_AM07H  0xffc0333c   /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
+#define                       CAN1_AM08L  0xffc03340   /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
+#define                       CAN1_AM08H  0xffc03344   /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
+#define                       CAN1_AM09L  0xffc03348   /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
+#define                       CAN1_AM09H  0xffc0334c   /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
+#define                       CAN1_AM10L  0xffc03350   /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
+#define                       CAN1_AM10H  0xffc03354   /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
+#define                       CAN1_AM11L  0xffc03358   /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
+#define                       CAN1_AM11H  0xffc0335c   /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
+#define                       CAN1_AM12L  0xffc03360   /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
+#define                       CAN1_AM12H  0xffc03364   /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
+#define                       CAN1_AM13L  0xffc03368   /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
+#define                       CAN1_AM13H  0xffc0336c   /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
+#define                       CAN1_AM14L  0xffc03370   /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
+#define                       CAN1_AM14H  0xffc03374   /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
+#define                       CAN1_AM15L  0xffc03378   /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
+#define                       CAN1_AM15H  0xffc0337c   /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM16L  0xffc03380   /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
+#define                       CAN1_AM16H  0xffc03384   /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
+#define                       CAN1_AM17L  0xffc03388   /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
+#define                       CAN1_AM17H  0xffc0338c   /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
+#define                       CAN1_AM18L  0xffc03390   /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
+#define                       CAN1_AM18H  0xffc03394   /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
+#define                       CAN1_AM19L  0xffc03398   /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
+#define                       CAN1_AM19H  0xffc0339c   /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
+#define                       CAN1_AM20L  0xffc033a0   /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
+#define                       CAN1_AM20H  0xffc033a4   /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
+#define                       CAN1_AM21L  0xffc033a8   /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
+#define                       CAN1_AM21H  0xffc033ac   /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
+#define                       CAN1_AM22L  0xffc033b0   /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
+#define                       CAN1_AM22H  0xffc033b4   /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
+#define                       CAN1_AM23L  0xffc033b8   /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
+#define                       CAN1_AM23H  0xffc033bc   /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
+#define                       CAN1_AM24L  0xffc033c0   /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
+#define                       CAN1_AM24H  0xffc033c4   /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
+#define                       CAN1_AM25L  0xffc033c8   /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
+#define                       CAN1_AM25H  0xffc033cc   /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
+#define                       CAN1_AM26L  0xffc033d0   /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
+#define                       CAN1_AM26H  0xffc033d4   /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
+#define                       CAN1_AM27L  0xffc033d8   /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
+#define                       CAN1_AM27H  0xffc033dc   /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
+#define                       CAN1_AM28L  0xffc033e0   /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
+#define                       CAN1_AM28H  0xffc033e4   /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
+#define                       CAN1_AM29L  0xffc033e8   /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
+#define                       CAN1_AM29H  0xffc033ec   /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
+#define                       CAN1_AM30L  0xffc033f0   /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
+#define                       CAN1_AM30H  0xffc033f4   /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
+#define                       CAN1_AM31L  0xffc033f8   /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
+#define                       CAN1_AM31H  0xffc033fc   /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB00_DATA0  0xffc03400   /* CAN Controller 1 Mailbox 0 Data 0 Register */
+#define                  CAN1_MB00_DATA1  0xffc03404   /* CAN Controller 1 Mailbox 0 Data 1 Register */
+#define                  CAN1_MB00_DATA2  0xffc03408   /* CAN Controller 1 Mailbox 0 Data 2 Register */
+#define                  CAN1_MB00_DATA3  0xffc0340c   /* CAN Controller 1 Mailbox 0 Data 3 Register */
+#define                 CAN1_MB00_LENGTH  0xffc03410   /* CAN Controller 1 Mailbox 0 Length Register */
+#define              CAN1_MB00_TIMESTAMP  0xffc03414   /* CAN Controller 1 Mailbox 0 Timestamp Register */
+#define                    CAN1_MB00_ID0  0xffc03418   /* CAN Controller 1 Mailbox 0 ID0 Register */
+#define                    CAN1_MB00_ID1  0xffc0341c   /* CAN Controller 1 Mailbox 0 ID1 Register */
+#define                  CAN1_MB01_DATA0  0xffc03420   /* CAN Controller 1 Mailbox 1 Data 0 Register */
+#define                  CAN1_MB01_DATA1  0xffc03424   /* CAN Controller 1 Mailbox 1 Data 1 Register */
+#define                  CAN1_MB01_DATA2  0xffc03428   /* CAN Controller 1 Mailbox 1 Data 2 Register */
+#define                  CAN1_MB01_DATA3  0xffc0342c   /* CAN Controller 1 Mailbox 1 Data 3 Register */
+#define                 CAN1_MB01_LENGTH  0xffc03430   /* CAN Controller 1 Mailbox 1 Length Register */
+#define              CAN1_MB01_TIMESTAMP  0xffc03434   /* CAN Controller 1 Mailbox 1 Timestamp Register */
+#define                    CAN1_MB01_ID0  0xffc03438   /* CAN Controller 1 Mailbox 1 ID0 Register */
+#define                    CAN1_MB01_ID1  0xffc0343c   /* CAN Controller 1 Mailbox 1 ID1 Register */
+#define                  CAN1_MB02_DATA0  0xffc03440   /* CAN Controller 1 Mailbox 2 Data 0 Register */
+#define                  CAN1_MB02_DATA1  0xffc03444   /* CAN Controller 1 Mailbox 2 Data 1 Register */
+#define                  CAN1_MB02_DATA2  0xffc03448   /* CAN Controller 1 Mailbox 2 Data 2 Register */
+#define                  CAN1_MB02_DATA3  0xffc0344c   /* CAN Controller 1 Mailbox 2 Data 3 Register */
+#define                 CAN1_MB02_LENGTH  0xffc03450   /* CAN Controller 1 Mailbox 2 Length Register */
+#define              CAN1_MB02_TIMESTAMP  0xffc03454   /* CAN Controller 1 Mailbox 2 Timestamp Register */
+#define                    CAN1_MB02_ID0  0xffc03458   /* CAN Controller 1 Mailbox 2 ID0 Register */
+#define                    CAN1_MB02_ID1  0xffc0345c   /* CAN Controller 1 Mailbox 2 ID1 Register */
+#define                  CAN1_MB03_DATA0  0xffc03460   /* CAN Controller 1 Mailbox 3 Data 0 Register */
+#define                  CAN1_MB03_DATA1  0xffc03464   /* CAN Controller 1 Mailbox 3 Data 1 Register */
+#define                  CAN1_MB03_DATA2  0xffc03468   /* CAN Controller 1 Mailbox 3 Data 2 Register */
+#define                  CAN1_MB03_DATA3  0xffc0346c   /* CAN Controller 1 Mailbox 3 Data 3 Register */
+#define                 CAN1_MB03_LENGTH  0xffc03470   /* CAN Controller 1 Mailbox 3 Length Register */
+#define              CAN1_MB03_TIMESTAMP  0xffc03474   /* CAN Controller 1 Mailbox 3 Timestamp Register */
+#define                    CAN1_MB03_ID0  0xffc03478   /* CAN Controller 1 Mailbox 3 ID0 Register */
+#define                    CAN1_MB03_ID1  0xffc0347c   /* CAN Controller 1 Mailbox 3 ID1 Register */
+#define                  CAN1_MB04_DATA0  0xffc03480   /* CAN Controller 1 Mailbox 4 Data 0 Register */
+#define                  CAN1_MB04_DATA1  0xffc03484   /* CAN Controller 1 Mailbox 4 Data 1 Register */
+#define                  CAN1_MB04_DATA2  0xffc03488   /* CAN Controller 1 Mailbox 4 Data 2 Register */
+#define                  CAN1_MB04_DATA3  0xffc0348c   /* CAN Controller 1 Mailbox 4 Data 3 Register */
+#define                 CAN1_MB04_LENGTH  0xffc03490   /* CAN Controller 1 Mailbox 4 Length Register */
+#define              CAN1_MB04_TIMESTAMP  0xffc03494   /* CAN Controller 1 Mailbox 4 Timestamp Register */
+#define                    CAN1_MB04_ID0  0xffc03498   /* CAN Controller 1 Mailbox 4 ID0 Register */
+#define                    CAN1_MB04_ID1  0xffc0349c   /* CAN Controller 1 Mailbox 4 ID1 Register */
+#define                  CAN1_MB05_DATA0  0xffc034a0   /* CAN Controller 1 Mailbox 5 Data 0 Register */
+#define                  CAN1_MB05_DATA1  0xffc034a4   /* CAN Controller 1 Mailbox 5 Data 1 Register */
+#define                  CAN1_MB05_DATA2  0xffc034a8   /* CAN Controller 1 Mailbox 5 Data 2 Register */
+#define                  CAN1_MB05_DATA3  0xffc034ac   /* CAN Controller 1 Mailbox 5 Data 3 Register */
+#define                 CAN1_MB05_LENGTH  0xffc034b0   /* CAN Controller 1 Mailbox 5 Length Register */
+#define              CAN1_MB05_TIMESTAMP  0xffc034b4   /* CAN Controller 1 Mailbox 5 Timestamp Register */
+#define                    CAN1_MB05_ID0  0xffc034b8   /* CAN Controller 1 Mailbox 5 ID0 Register */
+#define                    CAN1_MB05_ID1  0xffc034bc   /* CAN Controller 1 Mailbox 5 ID1 Register */
+#define                  CAN1_MB06_DATA0  0xffc034c0   /* CAN Controller 1 Mailbox 6 Data 0 Register */
+#define                  CAN1_MB06_DATA1  0xffc034c4   /* CAN Controller 1 Mailbox 6 Data 1 Register */
+#define                  CAN1_MB06_DATA2  0xffc034c8   /* CAN Controller 1 Mailbox 6 Data 2 Register */
+#define                  CAN1_MB06_DATA3  0xffc034cc   /* CAN Controller 1 Mailbox 6 Data 3 Register */
+#define                 CAN1_MB06_LENGTH  0xffc034d0   /* CAN Controller 1 Mailbox 6 Length Register */
+#define              CAN1_MB06_TIMESTAMP  0xffc034d4   /* CAN Controller 1 Mailbox 6 Timestamp Register */
+#define                    CAN1_MB06_ID0  0xffc034d8   /* CAN Controller 1 Mailbox 6 ID0 Register */
+#define                    CAN1_MB06_ID1  0xffc034dc   /* CAN Controller 1 Mailbox 6 ID1 Register */
+#define                  CAN1_MB07_DATA0  0xffc034e0   /* CAN Controller 1 Mailbox 7 Data 0 Register */
+#define                  CAN1_MB07_DATA1  0xffc034e4   /* CAN Controller 1 Mailbox 7 Data 1 Register */
+#define                  CAN1_MB07_DATA2  0xffc034e8   /* CAN Controller 1 Mailbox 7 Data 2 Register */
+#define                  CAN1_MB07_DATA3  0xffc034ec   /* CAN Controller 1 Mailbox 7 Data 3 Register */
+#define                 CAN1_MB07_LENGTH  0xffc034f0   /* CAN Controller 1 Mailbox 7 Length Register */
+#define              CAN1_MB07_TIMESTAMP  0xffc034f4   /* CAN Controller 1 Mailbox 7 Timestamp Register */
+#define                    CAN1_MB07_ID0  0xffc034f8   /* CAN Controller 1 Mailbox 7 ID0 Register */
+#define                    CAN1_MB07_ID1  0xffc034fc   /* CAN Controller 1 Mailbox 7 ID1 Register */
+#define                  CAN1_MB08_DATA0  0xffc03500   /* CAN Controller 1 Mailbox 8 Data 0 Register */
+#define                  CAN1_MB08_DATA1  0xffc03504   /* CAN Controller 1 Mailbox 8 Data 1 Register */
+#define                  CAN1_MB08_DATA2  0xffc03508   /* CAN Controller 1 Mailbox 8 Data 2 Register */
+#define                  CAN1_MB08_DATA3  0xffc0350c   /* CAN Controller 1 Mailbox 8 Data 3 Register */
+#define                 CAN1_MB08_LENGTH  0xffc03510   /* CAN Controller 1 Mailbox 8 Length Register */
+#define              CAN1_MB08_TIMESTAMP  0xffc03514   /* CAN Controller 1 Mailbox 8 Timestamp Register */
+#define                    CAN1_MB08_ID0  0xffc03518   /* CAN Controller 1 Mailbox 8 ID0 Register */
+#define                    CAN1_MB08_ID1  0xffc0351c   /* CAN Controller 1 Mailbox 8 ID1 Register */
+#define                  CAN1_MB09_DATA0  0xffc03520   /* CAN Controller 1 Mailbox 9 Data 0 Register */
+#define                  CAN1_MB09_DATA1  0xffc03524   /* CAN Controller 1 Mailbox 9 Data 1 Register */
+#define                  CAN1_MB09_DATA2  0xffc03528   /* CAN Controller 1 Mailbox 9 Data 2 Register */
+#define                  CAN1_MB09_DATA3  0xffc0352c   /* CAN Controller 1 Mailbox 9 Data 3 Register */
+#define                 CAN1_MB09_LENGTH  0xffc03530   /* CAN Controller 1 Mailbox 9 Length Register */
+#define              CAN1_MB09_TIMESTAMP  0xffc03534   /* CAN Controller 1 Mailbox 9 Timestamp Register */
+#define                    CAN1_MB09_ID0  0xffc03538   /* CAN Controller 1 Mailbox 9 ID0 Register */
+#define                    CAN1_MB09_ID1  0xffc0353c   /* CAN Controller 1 Mailbox 9 ID1 Register */
+#define                  CAN1_MB10_DATA0  0xffc03540   /* CAN Controller 1 Mailbox 10 Data 0 Register */
+#define                  CAN1_MB10_DATA1  0xffc03544   /* CAN Controller 1 Mailbox 10 Data 1 Register */
+#define                  CAN1_MB10_DATA2  0xffc03548   /* CAN Controller 1 Mailbox 10 Data 2 Register */
+#define                  CAN1_MB10_DATA3  0xffc0354c   /* CAN Controller 1 Mailbox 10 Data 3 Register */
+#define                 CAN1_MB10_LENGTH  0xffc03550   /* CAN Controller 1 Mailbox 10 Length Register */
+#define              CAN1_MB10_TIMESTAMP  0xffc03554   /* CAN Controller 1 Mailbox 10 Timestamp Register */
+#define                    CAN1_MB10_ID0  0xffc03558   /* CAN Controller 1 Mailbox 10 ID0 Register */
+#define                    CAN1_MB10_ID1  0xffc0355c   /* CAN Controller 1 Mailbox 10 ID1 Register */
+#define                  CAN1_MB11_DATA0  0xffc03560   /* CAN Controller 1 Mailbox 11 Data 0 Register */
+#define                  CAN1_MB11_DATA1  0xffc03564   /* CAN Controller 1 Mailbox 11 Data 1 Register */
+#define                  CAN1_MB11_DATA2  0xffc03568   /* CAN Controller 1 Mailbox 11 Data 2 Register */
+#define                  CAN1_MB11_DATA3  0xffc0356c   /* CAN Controller 1 Mailbox 11 Data 3 Register */
+#define                 CAN1_MB11_LENGTH  0xffc03570   /* CAN Controller 1 Mailbox 11 Length Register */
+#define              CAN1_MB11_TIMESTAMP  0xffc03574   /* CAN Controller 1 Mailbox 11 Timestamp Register */
+#define                    CAN1_MB11_ID0  0xffc03578   /* CAN Controller 1 Mailbox 11 ID0 Register */
+#define                    CAN1_MB11_ID1  0xffc0357c   /* CAN Controller 1 Mailbox 11 ID1 Register */
+#define                  CAN1_MB12_DATA0  0xffc03580   /* CAN Controller 1 Mailbox 12 Data 0 Register */
+#define                  CAN1_MB12_DATA1  0xffc03584   /* CAN Controller 1 Mailbox 12 Data 1 Register */
+#define                  CAN1_MB12_DATA2  0xffc03588   /* CAN Controller 1 Mailbox 12 Data 2 Register */
+#define                  CAN1_MB12_DATA3  0xffc0358c   /* CAN Controller 1 Mailbox 12 Data 3 Register */
+#define                 CAN1_MB12_LENGTH  0xffc03590   /* CAN Controller 1 Mailbox 12 Length Register */
+#define              CAN1_MB12_TIMESTAMP  0xffc03594   /* CAN Controller 1 Mailbox 12 Timestamp Register */
+#define                    CAN1_MB12_ID0  0xffc03598   /* CAN Controller 1 Mailbox 12 ID0 Register */
+#define                    CAN1_MB12_ID1  0xffc0359c   /* CAN Controller 1 Mailbox 12 ID1 Register */
+#define                  CAN1_MB13_DATA0  0xffc035a0   /* CAN Controller 1 Mailbox 13 Data 0 Register */
+#define                  CAN1_MB13_DATA1  0xffc035a4   /* CAN Controller 1 Mailbox 13 Data 1 Register */
+#define                  CAN1_MB13_DATA2  0xffc035a8   /* CAN Controller 1 Mailbox 13 Data 2 Register */
+#define                  CAN1_MB13_DATA3  0xffc035ac   /* CAN Controller 1 Mailbox 13 Data 3 Register */
+#define                 CAN1_MB13_LENGTH  0xffc035b0   /* CAN Controller 1 Mailbox 13 Length Register */
+#define              CAN1_MB13_TIMESTAMP  0xffc035b4   /* CAN Controller 1 Mailbox 13 Timestamp Register */
+#define                    CAN1_MB13_ID0  0xffc035b8   /* CAN Controller 1 Mailbox 13 ID0 Register */
+#define                    CAN1_MB13_ID1  0xffc035bc   /* CAN Controller 1 Mailbox 13 ID1 Register */
+#define                  CAN1_MB14_DATA0  0xffc035c0   /* CAN Controller 1 Mailbox 14 Data 0 Register */
+#define                  CAN1_MB14_DATA1  0xffc035c4   /* CAN Controller 1 Mailbox 14 Data 1 Register */
+#define                  CAN1_MB14_DATA2  0xffc035c8   /* CAN Controller 1 Mailbox 14 Data 2 Register */
+#define                  CAN1_MB14_DATA3  0xffc035cc   /* CAN Controller 1 Mailbox 14 Data 3 Register */
+#define                 CAN1_MB14_LENGTH  0xffc035d0   /* CAN Controller 1 Mailbox 14 Length Register */
+#define              CAN1_MB14_TIMESTAMP  0xffc035d4   /* CAN Controller 1 Mailbox 14 Timestamp Register */
+#define                    CAN1_MB14_ID0  0xffc035d8   /* CAN Controller 1 Mailbox 14 ID0 Register */
+#define                    CAN1_MB14_ID1  0xffc035dc   /* CAN Controller 1 Mailbox 14 ID1 Register */
+#define                  CAN1_MB15_DATA0  0xffc035e0   /* CAN Controller 1 Mailbox 15 Data 0 Register */
+#define                  CAN1_MB15_DATA1  0xffc035e4   /* CAN Controller 1 Mailbox 15 Data 1 Register */
+#define                  CAN1_MB15_DATA2  0xffc035e8   /* CAN Controller 1 Mailbox 15 Data 2 Register */
+#define                  CAN1_MB15_DATA3  0xffc035ec   /* CAN Controller 1 Mailbox 15 Data 3 Register */
+#define                 CAN1_MB15_LENGTH  0xffc035f0   /* CAN Controller 1 Mailbox 15 Length Register */
+#define              CAN1_MB15_TIMESTAMP  0xffc035f4   /* CAN Controller 1 Mailbox 15 Timestamp Register */
+#define                    CAN1_MB15_ID0  0xffc035f8   /* CAN Controller 1 Mailbox 15 ID0 Register */
+#define                    CAN1_MB15_ID1  0xffc035fc   /* CAN Controller 1 Mailbox 15 ID1 Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB16_DATA0  0xffc03600   /* CAN Controller 1 Mailbox 16 Data 0 Register */
+#define                  CAN1_MB16_DATA1  0xffc03604   /* CAN Controller 1 Mailbox 16 Data 1 Register */
+#define                  CAN1_MB16_DATA2  0xffc03608   /* CAN Controller 1 Mailbox 16 Data 2 Register */
+#define                  CAN1_MB16_DATA3  0xffc0360c   /* CAN Controller 1 Mailbox 16 Data 3 Register */
+#define                 CAN1_MB16_LENGTH  0xffc03610   /* CAN Controller 1 Mailbox 16 Length Register */
+#define              CAN1_MB16_TIMESTAMP  0xffc03614   /* CAN Controller 1 Mailbox 16 Timestamp Register */
+#define                    CAN1_MB16_ID0  0xffc03618   /* CAN Controller 1 Mailbox 16 ID0 Register */
+#define                    CAN1_MB16_ID1  0xffc0361c   /* CAN Controller 1 Mailbox 16 ID1 Register */
+#define                  CAN1_MB17_DATA0  0xffc03620   /* CAN Controller 1 Mailbox 17 Data 0 Register */
+#define                  CAN1_MB17_DATA1  0xffc03624   /* CAN Controller 1 Mailbox 17 Data 1 Register */
+#define                  CAN1_MB17_DATA2  0xffc03628   /* CAN Controller 1 Mailbox 17 Data 2 Register */
+#define                  CAN1_MB17_DATA3  0xffc0362c   /* CAN Controller 1 Mailbox 17 Data 3 Register */
+#define                 CAN1_MB17_LENGTH  0xffc03630   /* CAN Controller 1 Mailbox 17 Length Register */
+#define              CAN1_MB17_TIMESTAMP  0xffc03634   /* CAN Controller 1 Mailbox 17 Timestamp Register */
+#define                    CAN1_MB17_ID0  0xffc03638   /* CAN Controller 1 Mailbox 17 ID0 Register */
+#define                    CAN1_MB17_ID1  0xffc0363c   /* CAN Controller 1 Mailbox 17 ID1 Register */
+#define                  CAN1_MB18_DATA0  0xffc03640   /* CAN Controller 1 Mailbox 18 Data 0 Register */
+#define                  CAN1_MB18_DATA1  0xffc03644   /* CAN Controller 1 Mailbox 18 Data 1 Register */
+#define                  CAN1_MB18_DATA2  0xffc03648   /* CAN Controller 1 Mailbox 18 Data 2 Register */
+#define                  CAN1_MB18_DATA3  0xffc0364c   /* CAN Controller 1 Mailbox 18 Data 3 Register */
+#define                 CAN1_MB18_LENGTH  0xffc03650   /* CAN Controller 1 Mailbox 18 Length Register */
+#define              CAN1_MB18_TIMESTAMP  0xffc03654   /* CAN Controller 1 Mailbox 18 Timestamp Register */
+#define                    CAN1_MB18_ID0  0xffc03658   /* CAN Controller 1 Mailbox 18 ID0 Register */
+#define                    CAN1_MB18_ID1  0xffc0365c   /* CAN Controller 1 Mailbox 18 ID1 Register */
+#define                  CAN1_MB19_DATA0  0xffc03660   /* CAN Controller 1 Mailbox 19 Data 0 Register */
+#define                  CAN1_MB19_DATA1  0xffc03664   /* CAN Controller 1 Mailbox 19 Data 1 Register */
+#define                  CAN1_MB19_DATA2  0xffc03668   /* CAN Controller 1 Mailbox 19 Data 2 Register */
+#define                  CAN1_MB19_DATA3  0xffc0366c   /* CAN Controller 1 Mailbox 19 Data 3 Register */
+#define                 CAN1_MB19_LENGTH  0xffc03670   /* CAN Controller 1 Mailbox 19 Length Register */
+#define              CAN1_MB19_TIMESTAMP  0xffc03674   /* CAN Controller 1 Mailbox 19 Timestamp Register */
+#define                    CAN1_MB19_ID0  0xffc03678   /* CAN Controller 1 Mailbox 19 ID0 Register */
+#define                    CAN1_MB19_ID1  0xffc0367c   /* CAN Controller 1 Mailbox 19 ID1 Register */
+#define                  CAN1_MB20_DATA0  0xffc03680   /* CAN Controller 1 Mailbox 20 Data 0 Register */
+#define                  CAN1_MB20_DATA1  0xffc03684   /* CAN Controller 1 Mailbox 20 Data 1 Register */
+#define                  CAN1_MB20_DATA2  0xffc03688   /* CAN Controller 1 Mailbox 20 Data 2 Register */
+#define                  CAN1_MB20_DATA3  0xffc0368c   /* CAN Controller 1 Mailbox 20 Data 3 Register */
+#define                 CAN1_MB20_LENGTH  0xffc03690   /* CAN Controller 1 Mailbox 20 Length Register */
+#define              CAN1_MB20_TIMESTAMP  0xffc03694   /* CAN Controller 1 Mailbox 20 Timestamp Register */
+#define                    CAN1_MB20_ID0  0xffc03698   /* CAN Controller 1 Mailbox 20 ID0 Register */
+#define                    CAN1_MB20_ID1  0xffc0369c   /* CAN Controller 1 Mailbox 20 ID1 Register */
+#define                  CAN1_MB21_DATA0  0xffc036a0   /* CAN Controller 1 Mailbox 21 Data 0 Register */
+#define                  CAN1_MB21_DATA1  0xffc036a4   /* CAN Controller 1 Mailbox 21 Data 1 Register */
+#define                  CAN1_MB21_DATA2  0xffc036a8   /* CAN Controller 1 Mailbox 21 Data 2 Register */
+#define                  CAN1_MB21_DATA3  0xffc036ac   /* CAN Controller 1 Mailbox 21 Data 3 Register */
+#define                 CAN1_MB21_LENGTH  0xffc036b0   /* CAN Controller 1 Mailbox 21 Length Register */
+#define              CAN1_MB21_TIMESTAMP  0xffc036b4   /* CAN Controller 1 Mailbox 21 Timestamp Register */
+#define                    CAN1_MB21_ID0  0xffc036b8   /* CAN Controller 1 Mailbox 21 ID0 Register */
+#define                    CAN1_MB21_ID1  0xffc036bc   /* CAN Controller 1 Mailbox 21 ID1 Register */
+#define                  CAN1_MB22_DATA0  0xffc036c0   /* CAN Controller 1 Mailbox 22 Data 0 Register */
+#define                  CAN1_MB22_DATA1  0xffc036c4   /* CAN Controller 1 Mailbox 22 Data 1 Register */
+#define                  CAN1_MB22_DATA2  0xffc036c8   /* CAN Controller 1 Mailbox 22 Data 2 Register */
+#define                  CAN1_MB22_DATA3  0xffc036cc   /* CAN Controller 1 Mailbox 22 Data 3 Register */
+#define                 CAN1_MB22_LENGTH  0xffc036d0   /* CAN Controller 1 Mailbox 22 Length Register */
+#define              CAN1_MB22_TIMESTAMP  0xffc036d4   /* CAN Controller 1 Mailbox 22 Timestamp Register */
+#define                    CAN1_MB22_ID0  0xffc036d8   /* CAN Controller 1 Mailbox 22 ID0 Register */
+#define                    CAN1_MB22_ID1  0xffc036dc   /* CAN Controller 1 Mailbox 22 ID1 Register */
+#define                  CAN1_MB23_DATA0  0xffc036e0   /* CAN Controller 1 Mailbox 23 Data 0 Register */
+#define                  CAN1_MB23_DATA1  0xffc036e4   /* CAN Controller 1 Mailbox 23 Data 1 Register */
+#define                  CAN1_MB23_DATA2  0xffc036e8   /* CAN Controller 1 Mailbox 23 Data 2 Register */
+#define                  CAN1_MB23_DATA3  0xffc036ec   /* CAN Controller 1 Mailbox 23 Data 3 Register */
+#define                 CAN1_MB23_LENGTH  0xffc036f0   /* CAN Controller 1 Mailbox 23 Length Register */
+#define              CAN1_MB23_TIMESTAMP  0xffc036f4   /* CAN Controller 1 Mailbox 23 Timestamp Register */
+#define                    CAN1_MB23_ID0  0xffc036f8   /* CAN Controller 1 Mailbox 23 ID0 Register */
+#define                    CAN1_MB23_ID1  0xffc036fc   /* CAN Controller 1 Mailbox 23 ID1 Register */
+#define                  CAN1_MB24_DATA0  0xffc03700   /* CAN Controller 1 Mailbox 24 Data 0 Register */
+#define                  CAN1_MB24_DATA1  0xffc03704   /* CAN Controller 1 Mailbox 24 Data 1 Register */
+#define                  CAN1_MB24_DATA2  0xffc03708   /* CAN Controller 1 Mailbox 24 Data 2 Register */
+#define                  CAN1_MB24_DATA3  0xffc0370c   /* CAN Controller 1 Mailbox 24 Data 3 Register */
+#define                 CAN1_MB24_LENGTH  0xffc03710   /* CAN Controller 1 Mailbox 24 Length Register */
+#define              CAN1_MB24_TIMESTAMP  0xffc03714   /* CAN Controller 1 Mailbox 24 Timestamp Register */
+#define                    CAN1_MB24_ID0  0xffc03718   /* CAN Controller 1 Mailbox 24 ID0 Register */
+#define                    CAN1_MB24_ID1  0xffc0371c   /* CAN Controller 1 Mailbox 24 ID1 Register */
+#define                  CAN1_MB25_DATA0  0xffc03720   /* CAN Controller 1 Mailbox 25 Data 0 Register */
+#define                  CAN1_MB25_DATA1  0xffc03724   /* CAN Controller 1 Mailbox 25 Data 1 Register */
+#define                  CAN1_MB25_DATA2  0xffc03728   /* CAN Controller 1 Mailbox 25 Data 2 Register */
+#define                  CAN1_MB25_DATA3  0xffc0372c   /* CAN Controller 1 Mailbox 25 Data 3 Register */
+#define                 CAN1_MB25_LENGTH  0xffc03730   /* CAN Controller 1 Mailbox 25 Length Register */
+#define              CAN1_MB25_TIMESTAMP  0xffc03734   /* CAN Controller 1 Mailbox 25 Timestamp Register */
+#define                    CAN1_MB25_ID0  0xffc03738   /* CAN Controller 1 Mailbox 25 ID0 Register */
+#define                    CAN1_MB25_ID1  0xffc0373c   /* CAN Controller 1 Mailbox 25 ID1 Register */
+#define                  CAN1_MB26_DATA0  0xffc03740   /* CAN Controller 1 Mailbox 26 Data 0 Register */
+#define                  CAN1_MB26_DATA1  0xffc03744   /* CAN Controller 1 Mailbox 26 Data 1 Register */
+#define                  CAN1_MB26_DATA2  0xffc03748   /* CAN Controller 1 Mailbox 26 Data 2 Register */
+#define                  CAN1_MB26_DATA3  0xffc0374c   /* CAN Controller 1 Mailbox 26 Data 3 Register */
+#define                 CAN1_MB26_LENGTH  0xffc03750   /* CAN Controller 1 Mailbox 26 Length Register */
+#define              CAN1_MB26_TIMESTAMP  0xffc03754   /* CAN Controller 1 Mailbox 26 Timestamp Register */
+#define                    CAN1_MB26_ID0  0xffc03758   /* CAN Controller 1 Mailbox 26 ID0 Register */
+#define                    CAN1_MB26_ID1  0xffc0375c   /* CAN Controller 1 Mailbox 26 ID1 Register */
+#define                  CAN1_MB27_DATA0  0xffc03760   /* CAN Controller 1 Mailbox 27 Data 0 Register */
+#define                  CAN1_MB27_DATA1  0xffc03764   /* CAN Controller 1 Mailbox 27 Data 1 Register */
+#define                  CAN1_MB27_DATA2  0xffc03768   /* CAN Controller 1 Mailbox 27 Data 2 Register */
+#define                  CAN1_MB27_DATA3  0xffc0376c   /* CAN Controller 1 Mailbox 27 Data 3 Register */
+#define                 CAN1_MB27_LENGTH  0xffc03770   /* CAN Controller 1 Mailbox 27 Length Register */
+#define              CAN1_MB27_TIMESTAMP  0xffc03774   /* CAN Controller 1 Mailbox 27 Timestamp Register */
+#define                    CAN1_MB27_ID0  0xffc03778   /* CAN Controller 1 Mailbox 27 ID0 Register */
+#define                    CAN1_MB27_ID1  0xffc0377c   /* CAN Controller 1 Mailbox 27 ID1 Register */
+#define                  CAN1_MB28_DATA0  0xffc03780   /* CAN Controller 1 Mailbox 28 Data 0 Register */
+#define                  CAN1_MB28_DATA1  0xffc03784   /* CAN Controller 1 Mailbox 28 Data 1 Register */
+#define                  CAN1_MB28_DATA2  0xffc03788   /* CAN Controller 1 Mailbox 28 Data 2 Register */
+#define                  CAN1_MB28_DATA3  0xffc0378c   /* CAN Controller 1 Mailbox 28 Data 3 Register */
+#define                 CAN1_MB28_LENGTH  0xffc03790   /* CAN Controller 1 Mailbox 28 Length Register */
+#define              CAN1_MB28_TIMESTAMP  0xffc03794   /* CAN Controller 1 Mailbox 28 Timestamp Register */
+#define                    CAN1_MB28_ID0  0xffc03798   /* CAN Controller 1 Mailbox 28 ID0 Register */
+#define                    CAN1_MB28_ID1  0xffc0379c   /* CAN Controller 1 Mailbox 28 ID1 Register */
+#define                  CAN1_MB29_DATA0  0xffc037a0   /* CAN Controller 1 Mailbox 29 Data 0 Register */
+#define                  CAN1_MB29_DATA1  0xffc037a4   /* CAN Controller 1 Mailbox 29 Data 1 Register */
+#define                  CAN1_MB29_DATA2  0xffc037a8   /* CAN Controller 1 Mailbox 29 Data 2 Register */
+#define                  CAN1_MB29_DATA3  0xffc037ac   /* CAN Controller 1 Mailbox 29 Data 3 Register */
+#define                 CAN1_MB29_LENGTH  0xffc037b0   /* CAN Controller 1 Mailbox 29 Length Register */
+#define              CAN1_MB29_TIMESTAMP  0xffc037b4   /* CAN Controller 1 Mailbox 29 Timestamp Register */
+#define                    CAN1_MB29_ID0  0xffc037b8   /* CAN Controller 1 Mailbox 29 ID0 Register */
+#define                    CAN1_MB29_ID1  0xffc037bc   /* CAN Controller 1 Mailbox 29 ID1 Register */
+#define                  CAN1_MB30_DATA0  0xffc037c0   /* CAN Controller 1 Mailbox 30 Data 0 Register */
+#define                  CAN1_MB30_DATA1  0xffc037c4   /* CAN Controller 1 Mailbox 30 Data 1 Register */
+#define                  CAN1_MB30_DATA2  0xffc037c8   /* CAN Controller 1 Mailbox 30 Data 2 Register */
+#define                  CAN1_MB30_DATA3  0xffc037cc   /* CAN Controller 1 Mailbox 30 Data 3 Register */
+#define                 CAN1_MB30_LENGTH  0xffc037d0   /* CAN Controller 1 Mailbox 30 Length Register */
+#define              CAN1_MB30_TIMESTAMP  0xffc037d4   /* CAN Controller 1 Mailbox 30 Timestamp Register */
+#define                    CAN1_MB30_ID0  0xffc037d8   /* CAN Controller 1 Mailbox 30 ID0 Register */
+#define                    CAN1_MB30_ID1  0xffc037dc   /* CAN Controller 1 Mailbox 30 ID1 Register */
+#define                  CAN1_MB31_DATA0  0xffc037e0   /* CAN Controller 1 Mailbox 31 Data 0 Register */
+#define                  CAN1_MB31_DATA1  0xffc037e4   /* CAN Controller 1 Mailbox 31 Data 1 Register */
+#define                  CAN1_MB31_DATA2  0xffc037e8   /* CAN Controller 1 Mailbox 31 Data 2 Register */
+#define                  CAN1_MB31_DATA3  0xffc037ec   /* CAN Controller 1 Mailbox 31 Data 3 Register */
+#define                 CAN1_MB31_LENGTH  0xffc037f0   /* CAN Controller 1 Mailbox 31 Length Register */
+#define              CAN1_MB31_TIMESTAMP  0xffc037f4   /* CAN Controller 1 Mailbox 31 Timestamp Register */
+#define                    CAN1_MB31_ID0  0xffc037f8   /* CAN Controller 1 Mailbox 31 ID0 Register */
+#define                    CAN1_MB31_ID1  0xffc037fc   /* CAN Controller 1 Mailbox 31 ID1 Register */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
+
+/* Pixel Compositor (PIXC) Registers */
+
+#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
+#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
+#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
+#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
+#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
+#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
+#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
+#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
+#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
+#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
+#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
+#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
+#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
+#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
+#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
+#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
+#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
+#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
+#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
+
+/* Handshake MDMA 0 Registers */
+
+#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
+#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
+#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
+#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
+#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
+
+/* Handshake MDMA 1 Registers */
+
+#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
+#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
+#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
+#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
+#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for PIXC_CTL */
+
+#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
+#define                  OVR_A_EN  0x2        /* Overlay A Enable */
+#define                  OVR_B_EN  0x4        /* Overlay B Enable */
+#define                  IMG_FORM  0x8        /* Image Data Format */
+#define                  OVR_FORM  0x10       /* Overlay Data Format */
+#define                  OUT_FORM  0x20       /* Output Data Format */
+#define                   UDS_MOD  0x40       /* Resampling Mode */
+#define                     TC_EN  0x80       /* Transparent Color Enable */
+#define                  IMG_STAT  0x300      /* Image FIFO Status */
+#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
+#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
+
+/* Bit masks for PIXC_AHSTART */
+
+#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_AHEND */
+
+#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_AVSTART */
+
+#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_AVEND */
+
+#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_ATRANSP */
+
+#define                  A_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_BHSTART */
+
+#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_BHEND */
+
+#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_BVSTART */
+
+#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_BVEND */
+
+#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_BTRANSP */
+
+#define                  B_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_INTRSTAT */
+
+#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
+#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
+#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
+#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
+
+/* Bit masks for PIXC_RYCON */
+
+#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
+#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
+#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
+#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_GUCON */
+
+#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
+#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
+#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
+#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_BVCON */
+
+#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
+#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
+#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
+#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_CCBIAS */
+
+#define                       A14  0x3ff      /* A14 in the Bias Vector */
+#define                       A24  0xffc00    /* A24 in the Bias Vector */
+#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
+
+/* Bit masks for PIXC_TC */
+
+#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
+#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
+#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
+
+/* Bit masks for HOST_CONTROL */
+
+#define                   HOST_EN  0x1        /* Host Enable */
+#define                  HOST_END  0x2        /* Host Endianess */
+#define                 DATA_SIZE  0x4        /* Data Size */
+#define                  HOST_RST  0x8        /* Host Reset */
+#define                  HRDY_OVR  0x20       /* Host Ready Override */
+#define                  INT_MODE  0x40       /* Interrupt Mode */
+#define                     BT_EN  0x80       /* Bus Timeout Enable */
+#define                       EHW  0x100      /* Enable Host Write */
+#define                       EHR  0x200      /* Enable Host Read */
+#define                       BDR  0x400      /* Burst DMA Requests */
+
+/* Bit masks for HOST_STATUS */
+
+#define                 DMA_READY  0x1        /* DMA Ready */
+#define                  FIFOFULL  0x2        /* FIFO Full */
+#define                 FIFOEMPTY  0x4        /* FIFO Empty */
+#define                  COMPLETE  0x8        /* DMA Complete */
+#define                      HSHK  0x10       /* Host Handshake */
+#define                   TIMEOUT  0x20       /* Host Timeout */
+#define                      HIRQ  0x40       /* Host Interrupt Request */
+#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define                   DMA_DIR  0x100      /* DMA Direction */
+#define                       BTE  0x200      /* Bus Timeout Enabled */
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define                    TIMEN8  0x1        /* Timer 8 Enable */
+#define                    TIMEN9  0x2        /* Timer 9 Enable */
+#define                   TIMEN10  0x4        /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define                   TIMDIS8  0x1        /* Timer 8 Disable */
+#define                   TIMDIS9  0x2        /* Timer 9 Disable */
+#define                  TIMDIS10  0x4        /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
+#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
+#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
+#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
+#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
+#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
+#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
+#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
+#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+/* Bit masks for HMDMAx_CONTROL */
+
+#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
+#define                       REP  0x2        /* Handshake MDMA Request Polarity */
+#define                       UTE  0x8        /* Urgency Threshold Enable */
+#define                       OIE  0x10       /* Overflow Interrupt Enable */
+#define                      BDIE  0x20       /* Block Done Interrupt Enable */
+#define                      MBDI  0x40       /* Mask Block Done Interrupt */
+#define                       DRQ  0x300      /* Handshake MDMA Request Type */
+#define                       RBC  0x1000     /* Force Reload of BCOUNT */
+#define                        PS  0x2000     /* Pin Status */
+#define                        OI  0x4000     /* Overflow Interrupt Generated */
+#define                       BDI  0x8000     /* Block Done Interrupt Generated */
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+#endif /* _DEF_BF544_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
new file mode 100644
index 00000000000..661f0d877bd
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -0,0 +1,1244 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/defBF547.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF548_H
+#define _DEF_BF548_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+
+/* Timer Registers */
+
+#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
+#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
+#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
+#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
+#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
+#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
+#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
+#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
+#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
+#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
+#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
+#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
+
+/* Timer Group of 3 Registers */
+
+#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
+#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
+#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
+
+/* SPORT0 Registers */
+
+#define                      SPORT0_TCR1  0xffc00800   /* SPORT0 Transmit Configuration 1 Register */
+#define                      SPORT0_TCR2  0xffc00804   /* SPORT0 Transmit Configuration 2 Register */
+#define                   SPORT0_TCLKDIV  0xffc00808   /* SPORT0 Transmit Serial Clock Divider Register */
+#define                    SPORT0_TFSDIV  0xffc0080c   /* SPORT0 Transmit Frame Sync Divider Register */
+#define                        SPORT0_TX  0xffc00810   /* SPORT0 Transmit Data Register */
+#define                        SPORT0_RX  0xffc00818   /* SPORT0 Receive Data Register */
+#define                      SPORT0_RCR1  0xffc00820   /* SPORT0 Receive Configuration 1 Register */
+#define                      SPORT0_RCR2  0xffc00824   /* SPORT0 Receive Configuration 2 Register */
+#define                   SPORT0_RCLKDIV  0xffc00828   /* SPORT0 Receive Serial Clock Divider Register */
+#define                    SPORT0_RFSDIV  0xffc0082c   /* SPORT0 Receive Frame Sync Divider Register */
+#define                      SPORT0_STAT  0xffc00830   /* SPORT0 Status Register */
+#define                      SPORT0_CHNL  0xffc00834   /* SPORT0 Current Channel Register */
+#define                     SPORT0_MCMC1  0xffc00838   /* SPORT0 Multi channel Configuration Register 1 */
+#define                     SPORT0_MCMC2  0xffc0083c   /* SPORT0 Multi channel Configuration Register 2 */
+#define                     SPORT0_MTCS0  0xffc00840   /* SPORT0 Multi channel Transmit Select Register 0 */
+#define                     SPORT0_MTCS1  0xffc00844   /* SPORT0 Multi channel Transmit Select Register 1 */
+#define                     SPORT0_MTCS2  0xffc00848   /* SPORT0 Multi channel Transmit Select Register 2 */
+#define                     SPORT0_MTCS3  0xffc0084c   /* SPORT0 Multi channel Transmit Select Register 3 */
+#define                     SPORT0_MRCS0  0xffc00850   /* SPORT0 Multi channel Receive Select Register 0 */
+#define                     SPORT0_MRCS1  0xffc00854   /* SPORT0 Multi channel Receive Select Register 1 */
+#define                     SPORT0_MRCS2  0xffc00858   /* SPORT0 Multi channel Receive Select Register 2 */
+#define                     SPORT0_MRCS3  0xffc0085c   /* SPORT0 Multi channel Receive Select Register 3 */
+
+/* EPPI0 Registers */
+
+#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
+#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
+#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
+#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
+#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
+#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
+#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
+#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
+#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
+#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
+#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
+#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
+#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
+
+/* UART2 Registers */
+
+#define                        UART2_DLL  0xffc02100   /* Divisor Latch Low Byte */
+#define                        UART2_DLH  0xffc02104   /* Divisor Latch High Byte */
+#define                       UART2_GCTL  0xffc02108   /* Global Control Register */
+#define                        UART2_LCR  0xffc0210c   /* Line Control Register */
+#define                        UART2_MCR  0xffc02110   /* Modem Control Register */
+#define                        UART2_LSR  0xffc02114   /* Line Status Register */
+#define                        UART2_MSR  0xffc02118   /* Modem Status Register */
+#define                        UART2_SCR  0xffc0211c   /* Scratch Register */
+#define                    UART2_IER_SET  0xffc02120   /* Interrupt Enable Register Set */
+#define                  UART2_IER_CLEAR  0xffc02124   /* Interrupt Enable Register Clear */
+#define                        UART2_RBR  0xffc0212c   /* Receive Buffer Register */
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define                     TWI1_REGBASE  0xffc02200
+#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
+#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
+#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
+#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
+#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
+#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
+#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
+#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
+#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
+#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* SPI2  Registers */
+
+#define                     SPI2_REGBASE  0xffc02400
+#define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
+#define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
+#define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
+#define                        SPI2_TDBR  0xffc0240c   /* SPI2 Transmit Data Buffer Register */
+#define                        SPI2_RDBR  0xffc02410   /* SPI2 Receive Data Buffer Register */
+#define                        SPI2_BAUD  0xffc02414   /* SPI2 Baud Rate Register */
+#define                      SPI2_SHADOW  0xffc02418   /* SPI2 Receive Data Buffer Shadow Register */
+
+/* ATAPI Registers */
+
+#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
+#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
+#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
+#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
+#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
+#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
+#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
+#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
+#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
+#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
+#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
+#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
+#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
+#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
+#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
+#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
+#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
+#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
+#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
+#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
+#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
+#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
+#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
+
+/* SDH Registers */
+
+#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
+#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
+#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
+#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
+#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
+#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
+#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
+#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
+#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
+#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
+#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
+#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
+#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
+#define                       SDH_STATUS  0xffc03934   /* SDH Status */
+#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
+#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
+#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
+#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
+#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
+#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
+#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
+#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
+#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
+#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
+#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
+#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
+#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
+#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
+#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
+#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
+#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03c00   /* Function address register */
+#define                        USB_POWER  0xffc03c04   /* Power management register */
+#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03c20   /* USB frame number */
+#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
+#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
+#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+
+/* USB Endpoint 1 Control Registers */
+
+#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+
+/* USB Endpoint 2 Control Registers */
+
+#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+
+/* USB Endpoint 3 Control Registers */
+
+#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+
+/* USB Endpoint 4 Control Registers */
+
+#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+
+/* USB Endpoint 5 Control Registers */
+
+#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+
+/* USB Endpoint 6 Control Registers */
+
+#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
+#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+
+/* USB Endpoint 7 Control Registers */
+
+#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Keypad Registers */
+
+#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
+#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
+#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
+#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
+#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
+#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
+
+/* Pixel Compositor (PIXC) Registers */
+
+#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
+#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
+#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
+#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
+#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
+#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
+#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
+#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
+#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
+#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
+#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
+#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
+#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
+#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
+#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
+#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
+#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
+#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
+#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
+
+/* Handshake MDMA 0 Registers */
+
+#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
+#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
+#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
+#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
+#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
+
+/* Handshake MDMA 1 Registers */
+
+#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
+#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
+#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
+#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
+#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for PIXC_CTL */
+
+#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
+#define                  OVR_A_EN  0x2        /* Overlay A Enable */
+#define                  OVR_B_EN  0x4        /* Overlay B Enable */
+#define                  IMG_FORM  0x8        /* Image Data Format */
+#define                  OVR_FORM  0x10       /* Overlay Data Format */
+#define                  OUT_FORM  0x20       /* Output Data Format */
+#define                   UDS_MOD  0x40       /* Resampling Mode */
+#define                     TC_EN  0x80       /* Transparent Color Enable */
+#define                  IMG_STAT  0x300      /* Image FIFO Status */
+#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
+#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
+
+/* Bit masks for PIXC_AHSTART */
+
+#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_AHEND */
+
+#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_AVSTART */
+
+#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_AVEND */
+
+#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_ATRANSP */
+
+#define                  A_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_BHSTART */
+
+#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_BHEND */
+
+#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_BVSTART */
+
+#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_BVEND */
+
+#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_BTRANSP */
+
+#define                  B_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_INTRSTAT */
+
+#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
+#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
+#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
+#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
+
+/* Bit masks for PIXC_RYCON */
+
+#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
+#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
+#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
+#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_GUCON */
+
+#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
+#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
+#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
+#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_BVCON */
+
+#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
+#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
+#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
+#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_CCBIAS */
+
+#define                       A14  0x3ff      /* A14 in the Bias Vector */
+#define                       A24  0xffc00    /* A24 in the Bias Vector */
+#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
+
+/* Bit masks for PIXC_TC */
+
+#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
+#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
+#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
+
+/* Bit masks for HOST_CONTROL */
+
+#define                   HOST_EN  0x1        /* Host Enable */
+#define                  HOST_END  0x2        /* Host Endianess */
+#define                 DATA_SIZE  0x4        /* Data Size */
+#define                  HOST_RST  0x8        /* Host Reset */
+#define                  HRDY_OVR  0x20       /* Host Ready Override */
+#define                  INT_MODE  0x40       /* Interrupt Mode */
+#define                     BT_EN  0x80       /* Bus Timeout Enable */
+#define                       EHW  0x100      /* Enable Host Write */
+#define                       EHR  0x200      /* Enable Host Read */
+#define                       BDR  0x400      /* Burst DMA Requests */
+
+/* Bit masks for HOST_STATUS */
+
+#define                 DMA_READY  0x1        /* DMA Ready */
+#define                  FIFOFULL  0x2        /* FIFO Full */
+#define                 FIFOEMPTY  0x4        /* FIFO Empty */
+#define              DMA_COMPLETE  0x8        /* DMA Complete */
+#define                      HSHK  0x10       /* Host Handshake */
+#define                 HSTIMEOUT  0x20       /* Host Timeout */
+#define                      HIRQ  0x40       /* Host Interrupt Request */
+#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define                   DMA_DIR  0x100      /* DMA Direction */
+#define                       BTE  0x200      /* Bus Timeout Enabled */
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+
+/* Bit masks for KPAD_CTL */
+
+#define                   KPAD_EN  0x1        /* Keypad Enable */
+#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
+#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
+#define                KPAD_COLEN  0xe000     /* Column Enable Width */
+
+/* Bit masks for KPAD_PRESCALE */
+
+#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
+
+/* Bit masks for KPAD_MSEL */
+
+#define                DBON_SCALE  0xff       /* Debounce Scale Value */
+#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
+
+/* Bit masks for KPAD_ROWCOL */
+
+#define                  KPAD_ROW  0xff       /* Rows Pressed */
+#define                  KPAD_COL  0xff00     /* Columns Pressed */
+
+/* Bit masks for KPAD_STAT */
+
+#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
+#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
+#define              KPAD_PRESSED  0x8        /* Key press current status */
+
+/* Bit masks for KPAD_SOFTEVAL */
+
+#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
+
+/* Bit masks for SDH_COMMAND */
+
+#define                   CMD_IDX  0x3f       /* Command Index */
+#define                   CMD_RSP  0x40       /* Response */
+#define                 CMD_L_RSP  0x80       /* Long Response */
+#define                 CMD_INT_E  0x100      /* Command Interrupt */
+#define                CMD_PEND_E  0x200      /* Command Pending */
+#define                     CMD_E  0x400      /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define                    PWR_ON  0x3        /* Power On */
+#if 0
+#define                       TBD  0x3c       /* TBD */
+#endif
+#define                 SD_CMD_OD  0x40       /* Open Drain Output */
+#define                   ROD_CTL  0x80       /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define                    CLKDIV  0xff       /* MC_CLK Divisor */
+#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
+#define                  PWR_SV_E  0x200      /* Power Save Enable */
+#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
+#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define                  RESP_CMD  0x3f       /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define                     DTX_E  0x1        /* Data Transfer Enable */
+#define                   DTX_DIR  0x2        /* Data Transfer Direction */
+#define                  DTX_MODE  0x4        /* Data Transfer Mode */
+#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
+#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
+#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
+#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
+#define                RX_OVERRUN  0x20       /* Receive Overrun */
+#define              CMD_RESP_END  0x40       /* CMD Response End */
+#define                  CMD_SENT  0x80       /* CMD Sent */
+#define                   DAT_END  0x100      /* Data End */
+#define             START_BIT_ERR  0x200      /* Start Bit Error */
+#define               DAT_BLK_END  0x400      /* Data Block End */
+#define                   CMD_ACT  0x800      /* CMD Active */
+#define                    TX_ACT  0x1000     /* Transmit Active */
+#define                    RX_ACT  0x2000     /* Receive Active */
+#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
+#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
+#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
+#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
+#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
+#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
+#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
+#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
+#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
+#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
+#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
+#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
+#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
+#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
+#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
+#define              DAT_END_STAT  0x100      /* Data End Status */
+#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
+#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
+#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
+#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
+#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
+#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
+#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
+#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
+#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
+#define              DAT_END_MASK  0x100      /* Data End Mask */
+#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
+#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
+#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
+#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
+#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
+#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
+#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
+#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
+#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
+#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
+#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
+#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
+#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define                FIFO_COUNT  0x7fff     /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
+#define               SD_CARD_DET  0x10       /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
+#define                   SCD_MSK  0x40       /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define                   CLKS_EN  0x1        /* Clocks Enable */
+#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
+#define                       MWE  0x8        /* Moving Window Enable */
+#define                    SD_RST  0x10       /* SDMMC Reset */
+#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
+#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
+#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define                       RWR  0x1        /* Read Wait Request */
+
+/* Bit masks for ATAPI_CONTROL */
+
+#define                 PIO_START  0x1        /* Start PIO/Reg Op */
+#define               MULTI_START  0x2        /* Start Multi-DMA Op */
+#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
+#define                  XFER_DIR  0x8        /* Transfer Direction */
+#define                  IORDY_EN  0x10       /* IORDY Enable */
+#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
+#define                  SOFT_RST  0x40       /* Soft Reset */
+#define                   DEV_RST  0x80       /* Device Reset */
+#define                TFRCNT_RST  0x100      /* Trans Count Reset */
+#define               END_ON_TERM  0x200      /* End/Terminate Select */
+#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
+#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
+
+/* Bit masks for ATAPI_STATUS */
+
+#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
+#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
+#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
+#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
+
+/* Bit masks for ATAPI_DEV_ADDR */
+
+#define                  DEV_ADDR  0x1f       /* Device Address */
+
+/* Bit masks for ATAPI_INT_MASK */
+
+#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
+#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
+#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
+#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
+#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
+#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
+#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
+#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
+#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
+
+/* Bit masks for ATAPI_INT_STATUS */
+
+#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
+#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
+#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
+#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
+#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
+#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
+#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
+#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
+#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
+
+/* Bit masks for ATAPI_LINE_STATUS */
+
+#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
+#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
+#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
+#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
+#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
+#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
+#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
+#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
+#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
+#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_SM_STATE */
+
+#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
+#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
+#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
+#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_TERMINATE */
+
+#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
+
+/* Bit masks for ATAPI_REG_TIM_0 */
+
+#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
+#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
+
+/* Bit masks for ATAPI_PIO_TIM_0 */
+
+#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
+#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
+#define                    T4_REG  0xf000     /* DIOW data hold */
+
+/* Bit masks for ATAPI_PIO_TIM_1 */
+
+#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
+
+/* Bit masks for ATAPI_MULTI_TIM_0 */
+
+#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
+#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
+
+/* Bit masks for ATAPI_MULTI_TIM_1 */
+
+#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
+#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
+
+/* Bit masks for ATAPI_MULTI_TIM_2 */
+
+#define                        TH  0xff       /* Selects DIOW data hold */
+#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
+
+/* Bit masks for ATAPI_ULTRA_TIM_0 */
+
+#define                      TACK  0xff       /* Selects setup and hold times for TACK */
+#define                      TENV  0xff00     /* Selects envelope time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_1 */
+
+#define                      TDVS  0xff       /* Selects data valid setup time */
+#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_2 */
+
+#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define                      TMLI  0xff00     /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define                      TZAH  0xff       /* Selects minimum delay required for output */
+#define               READY_PAUSE  0xff00     /* Selects ready to pause */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define                    TIMEN8  0x1        /* Timer 8 Enable */
+#define                    TIMEN9  0x2        /* Timer 9 Enable */
+#define                   TIMEN10  0x4        /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define                   TIMDIS8  0x1        /* Timer 8 Disable */
+#define                   TIMDIS9  0x2        /* Timer 9 Disable */
+#define                  TIMDIS10  0x4        /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
+#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
+#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
+#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
+#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
+#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
+#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
+#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
+#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define                     RESET  0x8        /* Reset indicator */
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                      MODE  0x4        /* DMA Bus error */
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for HMDMAx_CONTROL */
+
+#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
+#define                       REP  0x2        /* Handshake MDMA Request Polarity */
+#define                       UTE  0x8        /* Urgency Threshold Enable */
+#define                       OIE  0x10       /* Overflow Interrupt Enable */
+#define                      BDIE  0x20       /* Block Done Interrupt Enable */
+#define                      MBDI  0x40       /* Mask Block Done Interrupt */
+#define                       DRQ  0x300      /* Handshake MDMA Request Type */
+#define                       RBC  0x1000     /* Force Reload of BCOUNT */
+#define                        PS  0x2000     /* Pin Status */
+#define                        OI  0x4000     /* Overflow Interrupt Generated */
+#define                       BDI  0x8000     /* Block Done Interrupt Generated */
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+
+#endif /* _DEF_BF548_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
new file mode 100644
index 00000000000..85d4bade911
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -0,0 +1,1627 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/defBF548.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF548_H
+#define _DEF_BF548_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+
+/* Timer Registers */
+
+#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
+#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
+#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
+#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
+#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
+#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
+#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
+#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
+#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
+#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
+#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
+#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
+
+/* Timer Group of 3 Registers */
+
+#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
+#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
+#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
+
+/* SPORT0 Registers */
+
+#define                      SPORT0_TCR1  0xffc00800   /* SPORT0 Transmit Configuration 1 Register */
+#define                      SPORT0_TCR2  0xffc00804   /* SPORT0 Transmit Configuration 2 Register */
+#define                   SPORT0_TCLKDIV  0xffc00808   /* SPORT0 Transmit Serial Clock Divider Register */
+#define                    SPORT0_TFSDIV  0xffc0080c   /* SPORT0 Transmit Frame Sync Divider Register */
+#define                        SPORT0_TX  0xffc00810   /* SPORT0 Transmit Data Register */
+#define                        SPORT0_RX  0xffc00818   /* SPORT0 Receive Data Register */
+#define                      SPORT0_RCR1  0xffc00820   /* SPORT0 Receive Configuration 1 Register */
+#define                      SPORT0_RCR2  0xffc00824   /* SPORT0 Receive Configuration 2 Register */
+#define                   SPORT0_RCLKDIV  0xffc00828   /* SPORT0 Receive Serial Clock Divider Register */
+#define                    SPORT0_RFSDIV  0xffc0082c   /* SPORT0 Receive Frame Sync Divider Register */
+#define                      SPORT0_STAT  0xffc00830   /* SPORT0 Status Register */
+#define                      SPORT0_CHNL  0xffc00834   /* SPORT0 Current Channel Register */
+#define                     SPORT0_MCMC1  0xffc00838   /* SPORT0 Multi channel Configuration Register 1 */
+#define                     SPORT0_MCMC2  0xffc0083c   /* SPORT0 Multi channel Configuration Register 2 */
+#define                     SPORT0_MTCS0  0xffc00840   /* SPORT0 Multi channel Transmit Select Register 0 */
+#define                     SPORT0_MTCS1  0xffc00844   /* SPORT0 Multi channel Transmit Select Register 1 */
+#define                     SPORT0_MTCS2  0xffc00848   /* SPORT0 Multi channel Transmit Select Register 2 */
+#define                     SPORT0_MTCS3  0xffc0084c   /* SPORT0 Multi channel Transmit Select Register 3 */
+#define                     SPORT0_MRCS0  0xffc00850   /* SPORT0 Multi channel Receive Select Register 0 */
+#define                     SPORT0_MRCS1  0xffc00854   /* SPORT0 Multi channel Receive Select Register 1 */
+#define                     SPORT0_MRCS2  0xffc00858   /* SPORT0 Multi channel Receive Select Register 2 */
+#define                     SPORT0_MRCS3  0xffc0085c   /* SPORT0 Multi channel Receive Select Register 3 */
+
+/* EPPI0 Registers */
+
+#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
+#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
+#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
+#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
+#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
+#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
+#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
+#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
+#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
+#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
+#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
+#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
+#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
+
+/* UART2 Registers */
+
+#define                        UART2_DLL  0xffc02100   /* Divisor Latch Low Byte */
+#define                        UART2_DLH  0xffc02104   /* Divisor Latch High Byte */
+#define                       UART2_GCTL  0xffc02108   /* Global Control Register */
+#define                        UART2_LCR  0xffc0210c   /* Line Control Register */
+#define                        UART2_MCR  0xffc02110   /* Modem Control Register */
+#define                        UART2_LSR  0xffc02114   /* Line Status Register */
+#define                        UART2_MSR  0xffc02118   /* Modem Status Register */
+#define                        UART2_SCR  0xffc0211c   /* Scratch Register */
+#define                    UART2_IER_SET  0xffc02120   /* Interrupt Enable Register Set */
+#define                  UART2_IER_CLEAR  0xffc02124   /* Interrupt Enable Register Clear */
+#define                        UART2_RBR  0xffc0212c   /* Receive Buffer Register */
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define                     TWI1_REGBASE  0xffc02200
+#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
+#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
+#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
+#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
+#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
+#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
+#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
+#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
+#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
+#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* SPI2  Registers */
+
+#define                     SPI2_REGBASE  0xffc02400
+#define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
+#define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
+#define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
+#define                        SPI2_TDBR  0xffc0240c   /* SPI2 Transmit Data Buffer Register */
+#define                        SPI2_RDBR  0xffc02410   /* SPI2 Receive Data Buffer Register */
+#define                        SPI2_BAUD  0xffc02414   /* SPI2 Baud Rate Register */
+#define                      SPI2_SHADOW  0xffc02418   /* SPI2 Receive Data Buffer Shadow Register */
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define                         CAN1_MC1  0xffc03200   /* CAN Controller 1 Mailbox Configuration Register 1 */
+#define                         CAN1_MD1  0xffc03204   /* CAN Controller 1 Mailbox Direction Register 1 */
+#define                        CAN1_TRS1  0xffc03208   /* CAN Controller 1 Transmit Request Set Register 1 */
+#define                        CAN1_TRR1  0xffc0320c   /* CAN Controller 1 Transmit Request Reset Register 1 */
+#define                         CAN1_TA1  0xffc03210   /* CAN Controller 1 Transmit Acknowledge Register 1 */
+#define                         CAN1_AA1  0xffc03214   /* CAN Controller 1 Abort Acknowledge Register 1 */
+#define                        CAN1_RMP1  0xffc03218   /* CAN Controller 1 Receive Message Pending Register 1 */
+#define                        CAN1_RML1  0xffc0321c   /* CAN Controller 1 Receive Message Lost Register 1 */
+#define                      CAN1_MBTIF1  0xffc03220   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
+#define                      CAN1_MBRIF1  0xffc03224   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
+#define                       CAN1_MBIM1  0xffc03228   /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
+#define                        CAN1_RFH1  0xffc0322c   /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
+#define                       CAN1_OPSS1  0xffc03230   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define                         CAN1_MC2  0xffc03240   /* CAN Controller 1 Mailbox Configuration Register 2 */
+#define                         CAN1_MD2  0xffc03244   /* CAN Controller 1 Mailbox Direction Register 2 */
+#define                        CAN1_TRS2  0xffc03248   /* CAN Controller 1 Transmit Request Set Register 2 */
+#define                        CAN1_TRR2  0xffc0324c   /* CAN Controller 1 Transmit Request Reset Register 2 */
+#define                         CAN1_TA2  0xffc03250   /* CAN Controller 1 Transmit Acknowledge Register 2 */
+#define                         CAN1_AA2  0xffc03254   /* CAN Controller 1 Abort Acknowledge Register 2 */
+#define                        CAN1_RMP2  0xffc03258   /* CAN Controller 1 Receive Message Pending Register 2 */
+#define                        CAN1_RML2  0xffc0325c   /* CAN Controller 1 Receive Message Lost Register 2 */
+#define                      CAN1_MBTIF2  0xffc03260   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
+#define                      CAN1_MBRIF2  0xffc03264   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
+#define                       CAN1_MBIM2  0xffc03268   /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
+#define                        CAN1_RFH2  0xffc0326c   /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
+#define                       CAN1_OPSS2  0xffc03270   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
+
+/* CAN Controller 1 Clock/Interrupt/Counter Registers */
+
+#define                       CAN1_CLOCK  0xffc03280   /* CAN Controller 1 Clock Register */
+#define                      CAN1_TIMING  0xffc03284   /* CAN Controller 1 Timing Register */
+#define                       CAN1_DEBUG  0xffc03288   /* CAN Controller 1 Debug Register */
+#define                      CAN1_STATUS  0xffc0328c   /* CAN Controller 1 Global Status Register */
+#define                         CAN1_CEC  0xffc03290   /* CAN Controller 1 Error Counter Register */
+#define                         CAN1_GIS  0xffc03294   /* CAN Controller 1 Global Interrupt Status Register */
+#define                         CAN1_GIM  0xffc03298   /* CAN Controller 1 Global Interrupt Mask Register */
+#define                         CAN1_GIF  0xffc0329c   /* CAN Controller 1 Global Interrupt Flag Register */
+#define                     CAN1_CONTROL  0xffc032a0   /* CAN Controller 1 Master Control Register */
+#define                        CAN1_INTR  0xffc032a4   /* CAN Controller 1 Interrupt Pending Register */
+#define                        CAN1_MBTD  0xffc032ac   /* CAN Controller 1 Mailbox Temporary Disable Register */
+#define                         CAN1_EWR  0xffc032b0   /* CAN Controller 1 Programmable Warning Level Register */
+#define                         CAN1_ESR  0xffc032b4   /* CAN Controller 1 Error Status Register */
+#define                       CAN1_UCCNT  0xffc032c4   /* CAN Controller 1 Universal Counter Register */
+#define                        CAN1_UCRC  0xffc032c8   /* CAN Controller 1 Universal Counter Force Reload Register */
+#define                       CAN1_UCCNF  0xffc032cc   /* CAN Controller 1 Universal Counter Configuration Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM00L  0xffc03300   /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
+#define                       CAN1_AM00H  0xffc03304   /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
+#define                       CAN1_AM01L  0xffc03308   /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
+#define                       CAN1_AM01H  0xffc0330c   /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
+#define                       CAN1_AM02L  0xffc03310   /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
+#define                       CAN1_AM02H  0xffc03314   /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
+#define                       CAN1_AM03L  0xffc03318   /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
+#define                       CAN1_AM03H  0xffc0331c   /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
+#define                       CAN1_AM04L  0xffc03320   /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
+#define                       CAN1_AM04H  0xffc03324   /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
+#define                       CAN1_AM05L  0xffc03328   /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
+#define                       CAN1_AM05H  0xffc0332c   /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
+#define                       CAN1_AM06L  0xffc03330   /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
+#define                       CAN1_AM06H  0xffc03334   /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
+#define                       CAN1_AM07L  0xffc03338   /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
+#define                       CAN1_AM07H  0xffc0333c   /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
+#define                       CAN1_AM08L  0xffc03340   /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
+#define                       CAN1_AM08H  0xffc03344   /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
+#define                       CAN1_AM09L  0xffc03348   /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
+#define                       CAN1_AM09H  0xffc0334c   /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
+#define                       CAN1_AM10L  0xffc03350   /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
+#define                       CAN1_AM10H  0xffc03354   /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
+#define                       CAN1_AM11L  0xffc03358   /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
+#define                       CAN1_AM11H  0xffc0335c   /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
+#define                       CAN1_AM12L  0xffc03360   /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
+#define                       CAN1_AM12H  0xffc03364   /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
+#define                       CAN1_AM13L  0xffc03368   /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
+#define                       CAN1_AM13H  0xffc0336c   /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
+#define                       CAN1_AM14L  0xffc03370   /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
+#define                       CAN1_AM14H  0xffc03374   /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
+#define                       CAN1_AM15L  0xffc03378   /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
+#define                       CAN1_AM15H  0xffc0337c   /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM16L  0xffc03380   /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
+#define                       CAN1_AM16H  0xffc03384   /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
+#define                       CAN1_AM17L  0xffc03388   /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
+#define                       CAN1_AM17H  0xffc0338c   /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
+#define                       CAN1_AM18L  0xffc03390   /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
+#define                       CAN1_AM18H  0xffc03394   /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
+#define                       CAN1_AM19L  0xffc03398   /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
+#define                       CAN1_AM19H  0xffc0339c   /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
+#define                       CAN1_AM20L  0xffc033a0   /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
+#define                       CAN1_AM20H  0xffc033a4   /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
+#define                       CAN1_AM21L  0xffc033a8   /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
+#define                       CAN1_AM21H  0xffc033ac   /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
+#define                       CAN1_AM22L  0xffc033b0   /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
+#define                       CAN1_AM22H  0xffc033b4   /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
+#define                       CAN1_AM23L  0xffc033b8   /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
+#define                       CAN1_AM23H  0xffc033bc   /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
+#define                       CAN1_AM24L  0xffc033c0   /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
+#define                       CAN1_AM24H  0xffc033c4   /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
+#define                       CAN1_AM25L  0xffc033c8   /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
+#define                       CAN1_AM25H  0xffc033cc   /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
+#define                       CAN1_AM26L  0xffc033d0   /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
+#define                       CAN1_AM26H  0xffc033d4   /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
+#define                       CAN1_AM27L  0xffc033d8   /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
+#define                       CAN1_AM27H  0xffc033dc   /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
+#define                       CAN1_AM28L  0xffc033e0   /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
+#define                       CAN1_AM28H  0xffc033e4   /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
+#define                       CAN1_AM29L  0xffc033e8   /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
+#define                       CAN1_AM29H  0xffc033ec   /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
+#define                       CAN1_AM30L  0xffc033f0   /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
+#define                       CAN1_AM30H  0xffc033f4   /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
+#define                       CAN1_AM31L  0xffc033f8   /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
+#define                       CAN1_AM31H  0xffc033fc   /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB00_DATA0  0xffc03400   /* CAN Controller 1 Mailbox 0 Data 0 Register */
+#define                  CAN1_MB00_DATA1  0xffc03404   /* CAN Controller 1 Mailbox 0 Data 1 Register */
+#define                  CAN1_MB00_DATA2  0xffc03408   /* CAN Controller 1 Mailbox 0 Data 2 Register */
+#define                  CAN1_MB00_DATA3  0xffc0340c   /* CAN Controller 1 Mailbox 0 Data 3 Register */
+#define                 CAN1_MB00_LENGTH  0xffc03410   /* CAN Controller 1 Mailbox 0 Length Register */
+#define              CAN1_MB00_TIMESTAMP  0xffc03414   /* CAN Controller 1 Mailbox 0 Timestamp Register */
+#define                    CAN1_MB00_ID0  0xffc03418   /* CAN Controller 1 Mailbox 0 ID0 Register */
+#define                    CAN1_MB00_ID1  0xffc0341c   /* CAN Controller 1 Mailbox 0 ID1 Register */
+#define                  CAN1_MB01_DATA0  0xffc03420   /* CAN Controller 1 Mailbox 1 Data 0 Register */
+#define                  CAN1_MB01_DATA1  0xffc03424   /* CAN Controller 1 Mailbox 1 Data 1 Register */
+#define                  CAN1_MB01_DATA2  0xffc03428   /* CAN Controller 1 Mailbox 1 Data 2 Register */
+#define                  CAN1_MB01_DATA3  0xffc0342c   /* CAN Controller 1 Mailbox 1 Data 3 Register */
+#define                 CAN1_MB01_LENGTH  0xffc03430   /* CAN Controller 1 Mailbox 1 Length Register */
+#define              CAN1_MB01_TIMESTAMP  0xffc03434   /* CAN Controller 1 Mailbox 1 Timestamp Register */
+#define                    CAN1_MB01_ID0  0xffc03438   /* CAN Controller 1 Mailbox 1 ID0 Register */
+#define                    CAN1_MB01_ID1  0xffc0343c   /* CAN Controller 1 Mailbox 1 ID1 Register */
+#define                  CAN1_MB02_DATA0  0xffc03440   /* CAN Controller 1 Mailbox 2 Data 0 Register */
+#define                  CAN1_MB02_DATA1  0xffc03444   /* CAN Controller 1 Mailbox 2 Data 1 Register */
+#define                  CAN1_MB02_DATA2  0xffc03448   /* CAN Controller 1 Mailbox 2 Data 2 Register */
+#define                  CAN1_MB02_DATA3  0xffc0344c   /* CAN Controller 1 Mailbox 2 Data 3 Register */
+#define                 CAN1_MB02_LENGTH  0xffc03450   /* CAN Controller 1 Mailbox 2 Length Register */
+#define              CAN1_MB02_TIMESTAMP  0xffc03454   /* CAN Controller 1 Mailbox 2 Timestamp Register */
+#define                    CAN1_MB02_ID0  0xffc03458   /* CAN Controller 1 Mailbox 2 ID0 Register */
+#define                    CAN1_MB02_ID1  0xffc0345c   /* CAN Controller 1 Mailbox 2 ID1 Register */
+#define                  CAN1_MB03_DATA0  0xffc03460   /* CAN Controller 1 Mailbox 3 Data 0 Register */
+#define                  CAN1_MB03_DATA1  0xffc03464   /* CAN Controller 1 Mailbox 3 Data 1 Register */
+#define                  CAN1_MB03_DATA2  0xffc03468   /* CAN Controller 1 Mailbox 3 Data 2 Register */
+#define                  CAN1_MB03_DATA3  0xffc0346c   /* CAN Controller 1 Mailbox 3 Data 3 Register */
+#define                 CAN1_MB03_LENGTH  0xffc03470   /* CAN Controller 1 Mailbox 3 Length Register */
+#define              CAN1_MB03_TIMESTAMP  0xffc03474   /* CAN Controller 1 Mailbox 3 Timestamp Register */
+#define                    CAN1_MB03_ID0  0xffc03478   /* CAN Controller 1 Mailbox 3 ID0 Register */
+#define                    CAN1_MB03_ID1  0xffc0347c   /* CAN Controller 1 Mailbox 3 ID1 Register */
+#define                  CAN1_MB04_DATA0  0xffc03480   /* CAN Controller 1 Mailbox 4 Data 0 Register */
+#define                  CAN1_MB04_DATA1  0xffc03484   /* CAN Controller 1 Mailbox 4 Data 1 Register */
+#define                  CAN1_MB04_DATA2  0xffc03488   /* CAN Controller 1 Mailbox 4 Data 2 Register */
+#define                  CAN1_MB04_DATA3  0xffc0348c   /* CAN Controller 1 Mailbox 4 Data 3 Register */
+#define                 CAN1_MB04_LENGTH  0xffc03490   /* CAN Controller 1 Mailbox 4 Length Register */
+#define              CAN1_MB04_TIMESTAMP  0xffc03494   /* CAN Controller 1 Mailbox 4 Timestamp Register */
+#define                    CAN1_MB04_ID0  0xffc03498   /* CAN Controller 1 Mailbox 4 ID0 Register */
+#define                    CAN1_MB04_ID1  0xffc0349c   /* CAN Controller 1 Mailbox 4 ID1 Register */
+#define                  CAN1_MB05_DATA0  0xffc034a0   /* CAN Controller 1 Mailbox 5 Data 0 Register */
+#define                  CAN1_MB05_DATA1  0xffc034a4   /* CAN Controller 1 Mailbox 5 Data 1 Register */
+#define                  CAN1_MB05_DATA2  0xffc034a8   /* CAN Controller 1 Mailbox 5 Data 2 Register */
+#define                  CAN1_MB05_DATA3  0xffc034ac   /* CAN Controller 1 Mailbox 5 Data 3 Register */
+#define                 CAN1_MB05_LENGTH  0xffc034b0   /* CAN Controller 1 Mailbox 5 Length Register */
+#define              CAN1_MB05_TIMESTAMP  0xffc034b4   /* CAN Controller 1 Mailbox 5 Timestamp Register */
+#define                    CAN1_MB05_ID0  0xffc034b8   /* CAN Controller 1 Mailbox 5 ID0 Register */
+#define                    CAN1_MB05_ID1  0xffc034bc   /* CAN Controller 1 Mailbox 5 ID1 Register */
+#define                  CAN1_MB06_DATA0  0xffc034c0   /* CAN Controller 1 Mailbox 6 Data 0 Register */
+#define                  CAN1_MB06_DATA1  0xffc034c4   /* CAN Controller 1 Mailbox 6 Data 1 Register */
+#define                  CAN1_MB06_DATA2  0xffc034c8   /* CAN Controller 1 Mailbox 6 Data 2 Register */
+#define                  CAN1_MB06_DATA3  0xffc034cc   /* CAN Controller 1 Mailbox 6 Data 3 Register */
+#define                 CAN1_MB06_LENGTH  0xffc034d0   /* CAN Controller 1 Mailbox 6 Length Register */
+#define              CAN1_MB06_TIMESTAMP  0xffc034d4   /* CAN Controller 1 Mailbox 6 Timestamp Register */
+#define                    CAN1_MB06_ID0  0xffc034d8   /* CAN Controller 1 Mailbox 6 ID0 Register */
+#define                    CAN1_MB06_ID1  0xffc034dc   /* CAN Controller 1 Mailbox 6 ID1 Register */
+#define                  CAN1_MB07_DATA0  0xffc034e0   /* CAN Controller 1 Mailbox 7 Data 0 Register */
+#define                  CAN1_MB07_DATA1  0xffc034e4   /* CAN Controller 1 Mailbox 7 Data 1 Register */
+#define                  CAN1_MB07_DATA2  0xffc034e8   /* CAN Controller 1 Mailbox 7 Data 2 Register */
+#define                  CAN1_MB07_DATA3  0xffc034ec   /* CAN Controller 1 Mailbox 7 Data 3 Register */
+#define                 CAN1_MB07_LENGTH  0xffc034f0   /* CAN Controller 1 Mailbox 7 Length Register */
+#define              CAN1_MB07_TIMESTAMP  0xffc034f4   /* CAN Controller 1 Mailbox 7 Timestamp Register */
+#define                    CAN1_MB07_ID0  0xffc034f8   /* CAN Controller 1 Mailbox 7 ID0 Register */
+#define                    CAN1_MB07_ID1  0xffc034fc   /* CAN Controller 1 Mailbox 7 ID1 Register */
+#define                  CAN1_MB08_DATA0  0xffc03500   /* CAN Controller 1 Mailbox 8 Data 0 Register */
+#define                  CAN1_MB08_DATA1  0xffc03504   /* CAN Controller 1 Mailbox 8 Data 1 Register */
+#define                  CAN1_MB08_DATA2  0xffc03508   /* CAN Controller 1 Mailbox 8 Data 2 Register */
+#define                  CAN1_MB08_DATA3  0xffc0350c   /* CAN Controller 1 Mailbox 8 Data 3 Register */
+#define                 CAN1_MB08_LENGTH  0xffc03510   /* CAN Controller 1 Mailbox 8 Length Register */
+#define              CAN1_MB08_TIMESTAMP  0xffc03514   /* CAN Controller 1 Mailbox 8 Timestamp Register */
+#define                    CAN1_MB08_ID0  0xffc03518   /* CAN Controller 1 Mailbox 8 ID0 Register */
+#define                    CAN1_MB08_ID1  0xffc0351c   /* CAN Controller 1 Mailbox 8 ID1 Register */
+#define                  CAN1_MB09_DATA0  0xffc03520   /* CAN Controller 1 Mailbox 9 Data 0 Register */
+#define                  CAN1_MB09_DATA1  0xffc03524   /* CAN Controller 1 Mailbox 9 Data 1 Register */
+#define                  CAN1_MB09_DATA2  0xffc03528   /* CAN Controller 1 Mailbox 9 Data 2 Register */
+#define                  CAN1_MB09_DATA3  0xffc0352c   /* CAN Controller 1 Mailbox 9 Data 3 Register */
+#define                 CAN1_MB09_LENGTH  0xffc03530   /* CAN Controller 1 Mailbox 9 Length Register */
+#define              CAN1_MB09_TIMESTAMP  0xffc03534   /* CAN Controller 1 Mailbox 9 Timestamp Register */
+#define                    CAN1_MB09_ID0  0xffc03538   /* CAN Controller 1 Mailbox 9 ID0 Register */
+#define                    CAN1_MB09_ID1  0xffc0353c   /* CAN Controller 1 Mailbox 9 ID1 Register */
+#define                  CAN1_MB10_DATA0  0xffc03540   /* CAN Controller 1 Mailbox 10 Data 0 Register */
+#define                  CAN1_MB10_DATA1  0xffc03544   /* CAN Controller 1 Mailbox 10 Data 1 Register */
+#define                  CAN1_MB10_DATA2  0xffc03548   /* CAN Controller 1 Mailbox 10 Data 2 Register */
+#define                  CAN1_MB10_DATA3  0xffc0354c   /* CAN Controller 1 Mailbox 10 Data 3 Register */
+#define                 CAN1_MB10_LENGTH  0xffc03550   /* CAN Controller 1 Mailbox 10 Length Register */
+#define              CAN1_MB10_TIMESTAMP  0xffc03554   /* CAN Controller 1 Mailbox 10 Timestamp Register */
+#define                    CAN1_MB10_ID0  0xffc03558   /* CAN Controller 1 Mailbox 10 ID0 Register */
+#define                    CAN1_MB10_ID1  0xffc0355c   /* CAN Controller 1 Mailbox 10 ID1 Register */
+#define                  CAN1_MB11_DATA0  0xffc03560   /* CAN Controller 1 Mailbox 11 Data 0 Register */
+#define                  CAN1_MB11_DATA1  0xffc03564   /* CAN Controller 1 Mailbox 11 Data 1 Register */
+#define                  CAN1_MB11_DATA2  0xffc03568   /* CAN Controller 1 Mailbox 11 Data 2 Register */
+#define                  CAN1_MB11_DATA3  0xffc0356c   /* CAN Controller 1 Mailbox 11 Data 3 Register */
+#define                 CAN1_MB11_LENGTH  0xffc03570   /* CAN Controller 1 Mailbox 11 Length Register */
+#define              CAN1_MB11_TIMESTAMP  0xffc03574   /* CAN Controller 1 Mailbox 11 Timestamp Register */
+#define                    CAN1_MB11_ID0  0xffc03578   /* CAN Controller 1 Mailbox 11 ID0 Register */
+#define                    CAN1_MB11_ID1  0xffc0357c   /* CAN Controller 1 Mailbox 11 ID1 Register */
+#define                  CAN1_MB12_DATA0  0xffc03580   /* CAN Controller 1 Mailbox 12 Data 0 Register */
+#define                  CAN1_MB12_DATA1  0xffc03584   /* CAN Controller 1 Mailbox 12 Data 1 Register */
+#define                  CAN1_MB12_DATA2  0xffc03588   /* CAN Controller 1 Mailbox 12 Data 2 Register */
+#define                  CAN1_MB12_DATA3  0xffc0358c   /* CAN Controller 1 Mailbox 12 Data 3 Register */
+#define                 CAN1_MB12_LENGTH  0xffc03590   /* CAN Controller 1 Mailbox 12 Length Register */
+#define              CAN1_MB12_TIMESTAMP  0xffc03594   /* CAN Controller 1 Mailbox 12 Timestamp Register */
+#define                    CAN1_MB12_ID0  0xffc03598   /* CAN Controller 1 Mailbox 12 ID0 Register */
+#define                    CAN1_MB12_ID1  0xffc0359c   /* CAN Controller 1 Mailbox 12 ID1 Register */
+#define                  CAN1_MB13_DATA0  0xffc035a0   /* CAN Controller 1 Mailbox 13 Data 0 Register */
+#define                  CAN1_MB13_DATA1  0xffc035a4   /* CAN Controller 1 Mailbox 13 Data 1 Register */
+#define                  CAN1_MB13_DATA2  0xffc035a8   /* CAN Controller 1 Mailbox 13 Data 2 Register */
+#define                  CAN1_MB13_DATA3  0xffc035ac   /* CAN Controller 1 Mailbox 13 Data 3 Register */
+#define                 CAN1_MB13_LENGTH  0xffc035b0   /* CAN Controller 1 Mailbox 13 Length Register */
+#define              CAN1_MB13_TIMESTAMP  0xffc035b4   /* CAN Controller 1 Mailbox 13 Timestamp Register */
+#define                    CAN1_MB13_ID0  0xffc035b8   /* CAN Controller 1 Mailbox 13 ID0 Register */
+#define                    CAN1_MB13_ID1  0xffc035bc   /* CAN Controller 1 Mailbox 13 ID1 Register */
+#define                  CAN1_MB14_DATA0  0xffc035c0   /* CAN Controller 1 Mailbox 14 Data 0 Register */
+#define                  CAN1_MB14_DATA1  0xffc035c4   /* CAN Controller 1 Mailbox 14 Data 1 Register */
+#define                  CAN1_MB14_DATA2  0xffc035c8   /* CAN Controller 1 Mailbox 14 Data 2 Register */
+#define                  CAN1_MB14_DATA3  0xffc035cc   /* CAN Controller 1 Mailbox 14 Data 3 Register */
+#define                 CAN1_MB14_LENGTH  0xffc035d0   /* CAN Controller 1 Mailbox 14 Length Register */
+#define              CAN1_MB14_TIMESTAMP  0xffc035d4   /* CAN Controller 1 Mailbox 14 Timestamp Register */
+#define                    CAN1_MB14_ID0  0xffc035d8   /* CAN Controller 1 Mailbox 14 ID0 Register */
+#define                    CAN1_MB14_ID1  0xffc035dc   /* CAN Controller 1 Mailbox 14 ID1 Register */
+#define                  CAN1_MB15_DATA0  0xffc035e0   /* CAN Controller 1 Mailbox 15 Data 0 Register */
+#define                  CAN1_MB15_DATA1  0xffc035e4   /* CAN Controller 1 Mailbox 15 Data 1 Register */
+#define                  CAN1_MB15_DATA2  0xffc035e8   /* CAN Controller 1 Mailbox 15 Data 2 Register */
+#define                  CAN1_MB15_DATA3  0xffc035ec   /* CAN Controller 1 Mailbox 15 Data 3 Register */
+#define                 CAN1_MB15_LENGTH  0xffc035f0   /* CAN Controller 1 Mailbox 15 Length Register */
+#define              CAN1_MB15_TIMESTAMP  0xffc035f4   /* CAN Controller 1 Mailbox 15 Timestamp Register */
+#define                    CAN1_MB15_ID0  0xffc035f8   /* CAN Controller 1 Mailbox 15 ID0 Register */
+#define                    CAN1_MB15_ID1  0xffc035fc   /* CAN Controller 1 Mailbox 15 ID1 Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB16_DATA0  0xffc03600   /* CAN Controller 1 Mailbox 16 Data 0 Register */
+#define                  CAN1_MB16_DATA1  0xffc03604   /* CAN Controller 1 Mailbox 16 Data 1 Register */
+#define                  CAN1_MB16_DATA2  0xffc03608   /* CAN Controller 1 Mailbox 16 Data 2 Register */
+#define                  CAN1_MB16_DATA3  0xffc0360c   /* CAN Controller 1 Mailbox 16 Data 3 Register */
+#define                 CAN1_MB16_LENGTH  0xffc03610   /* CAN Controller 1 Mailbox 16 Length Register */
+#define              CAN1_MB16_TIMESTAMP  0xffc03614   /* CAN Controller 1 Mailbox 16 Timestamp Register */
+#define                    CAN1_MB16_ID0  0xffc03618   /* CAN Controller 1 Mailbox 16 ID0 Register */
+#define                    CAN1_MB16_ID1  0xffc0361c   /* CAN Controller 1 Mailbox 16 ID1 Register */
+#define                  CAN1_MB17_DATA0  0xffc03620   /* CAN Controller 1 Mailbox 17 Data 0 Register */
+#define                  CAN1_MB17_DATA1  0xffc03624   /* CAN Controller 1 Mailbox 17 Data 1 Register */
+#define                  CAN1_MB17_DATA2  0xffc03628   /* CAN Controller 1 Mailbox 17 Data 2 Register */
+#define                  CAN1_MB17_DATA3  0xffc0362c   /* CAN Controller 1 Mailbox 17 Data 3 Register */
+#define                 CAN1_MB17_LENGTH  0xffc03630   /* CAN Controller 1 Mailbox 17 Length Register */
+#define              CAN1_MB17_TIMESTAMP  0xffc03634   /* CAN Controller 1 Mailbox 17 Timestamp Register */
+#define                    CAN1_MB17_ID0  0xffc03638   /* CAN Controller 1 Mailbox 17 ID0 Register */
+#define                    CAN1_MB17_ID1  0xffc0363c   /* CAN Controller 1 Mailbox 17 ID1 Register */
+#define                  CAN1_MB18_DATA0  0xffc03640   /* CAN Controller 1 Mailbox 18 Data 0 Register */
+#define                  CAN1_MB18_DATA1  0xffc03644   /* CAN Controller 1 Mailbox 18 Data 1 Register */
+#define                  CAN1_MB18_DATA2  0xffc03648   /* CAN Controller 1 Mailbox 18 Data 2 Register */
+#define                  CAN1_MB18_DATA3  0xffc0364c   /* CAN Controller 1 Mailbox 18 Data 3 Register */
+#define                 CAN1_MB18_LENGTH  0xffc03650   /* CAN Controller 1 Mailbox 18 Length Register */
+#define              CAN1_MB18_TIMESTAMP  0xffc03654   /* CAN Controller 1 Mailbox 18 Timestamp Register */
+#define                    CAN1_MB18_ID0  0xffc03658   /* CAN Controller 1 Mailbox 18 ID0 Register */
+#define                    CAN1_MB18_ID1  0xffc0365c   /* CAN Controller 1 Mailbox 18 ID1 Register */
+#define                  CAN1_MB19_DATA0  0xffc03660   /* CAN Controller 1 Mailbox 19 Data 0 Register */
+#define                  CAN1_MB19_DATA1  0xffc03664   /* CAN Controller 1 Mailbox 19 Data 1 Register */
+#define                  CAN1_MB19_DATA2  0xffc03668   /* CAN Controller 1 Mailbox 19 Data 2 Register */
+#define                  CAN1_MB19_DATA3  0xffc0366c   /* CAN Controller 1 Mailbox 19 Data 3 Register */
+#define                 CAN1_MB19_LENGTH  0xffc03670   /* CAN Controller 1 Mailbox 19 Length Register */
+#define              CAN1_MB19_TIMESTAMP  0xffc03674   /* CAN Controller 1 Mailbox 19 Timestamp Register */
+#define                    CAN1_MB19_ID0  0xffc03678   /* CAN Controller 1 Mailbox 19 ID0 Register */
+#define                    CAN1_MB19_ID1  0xffc0367c   /* CAN Controller 1 Mailbox 19 ID1 Register */
+#define                  CAN1_MB20_DATA0  0xffc03680   /* CAN Controller 1 Mailbox 20 Data 0 Register */
+#define                  CAN1_MB20_DATA1  0xffc03684   /* CAN Controller 1 Mailbox 20 Data 1 Register */
+#define                  CAN1_MB20_DATA2  0xffc03688   /* CAN Controller 1 Mailbox 20 Data 2 Register */
+#define                  CAN1_MB20_DATA3  0xffc0368c   /* CAN Controller 1 Mailbox 20 Data 3 Register */
+#define                 CAN1_MB20_LENGTH  0xffc03690   /* CAN Controller 1 Mailbox 20 Length Register */
+#define              CAN1_MB20_TIMESTAMP  0xffc03694   /* CAN Controller 1 Mailbox 20 Timestamp Register */
+#define                    CAN1_MB20_ID0  0xffc03698   /* CAN Controller 1 Mailbox 20 ID0 Register */
+#define                    CAN1_MB20_ID1  0xffc0369c   /* CAN Controller 1 Mailbox 20 ID1 Register */
+#define                  CAN1_MB21_DATA0  0xffc036a0   /* CAN Controller 1 Mailbox 21 Data 0 Register */
+#define                  CAN1_MB21_DATA1  0xffc036a4   /* CAN Controller 1 Mailbox 21 Data 1 Register */
+#define                  CAN1_MB21_DATA2  0xffc036a8   /* CAN Controller 1 Mailbox 21 Data 2 Register */
+#define                  CAN1_MB21_DATA3  0xffc036ac   /* CAN Controller 1 Mailbox 21 Data 3 Register */
+#define                 CAN1_MB21_LENGTH  0xffc036b0   /* CAN Controller 1 Mailbox 21 Length Register */
+#define              CAN1_MB21_TIMESTAMP  0xffc036b4   /* CAN Controller 1 Mailbox 21 Timestamp Register */
+#define                    CAN1_MB21_ID0  0xffc036b8   /* CAN Controller 1 Mailbox 21 ID0 Register */
+#define                    CAN1_MB21_ID1  0xffc036bc   /* CAN Controller 1 Mailbox 21 ID1 Register */
+#define                  CAN1_MB22_DATA0  0xffc036c0   /* CAN Controller 1 Mailbox 22 Data 0 Register */
+#define                  CAN1_MB22_DATA1  0xffc036c4   /* CAN Controller 1 Mailbox 22 Data 1 Register */
+#define                  CAN1_MB22_DATA2  0xffc036c8   /* CAN Controller 1 Mailbox 22 Data 2 Register */
+#define                  CAN1_MB22_DATA3  0xffc036cc   /* CAN Controller 1 Mailbox 22 Data 3 Register */
+#define                 CAN1_MB22_LENGTH  0xffc036d0   /* CAN Controller 1 Mailbox 22 Length Register */
+#define              CAN1_MB22_TIMESTAMP  0xffc036d4   /* CAN Controller 1 Mailbox 22 Timestamp Register */
+#define                    CAN1_MB22_ID0  0xffc036d8   /* CAN Controller 1 Mailbox 22 ID0 Register */
+#define                    CAN1_MB22_ID1  0xffc036dc   /* CAN Controller 1 Mailbox 22 ID1 Register */
+#define                  CAN1_MB23_DATA0  0xffc036e0   /* CAN Controller 1 Mailbox 23 Data 0 Register */
+#define                  CAN1_MB23_DATA1  0xffc036e4   /* CAN Controller 1 Mailbox 23 Data 1 Register */
+#define                  CAN1_MB23_DATA2  0xffc036e8   /* CAN Controller 1 Mailbox 23 Data 2 Register */
+#define                  CAN1_MB23_DATA3  0xffc036ec   /* CAN Controller 1 Mailbox 23 Data 3 Register */
+#define                 CAN1_MB23_LENGTH  0xffc036f0   /* CAN Controller 1 Mailbox 23 Length Register */
+#define              CAN1_MB23_TIMESTAMP  0xffc036f4   /* CAN Controller 1 Mailbox 23 Timestamp Register */
+#define                    CAN1_MB23_ID0  0xffc036f8   /* CAN Controller 1 Mailbox 23 ID0 Register */
+#define                    CAN1_MB23_ID1  0xffc036fc   /* CAN Controller 1 Mailbox 23 ID1 Register */
+#define                  CAN1_MB24_DATA0  0xffc03700   /* CAN Controller 1 Mailbox 24 Data 0 Register */
+#define                  CAN1_MB24_DATA1  0xffc03704   /* CAN Controller 1 Mailbox 24 Data 1 Register */
+#define                  CAN1_MB24_DATA2  0xffc03708   /* CAN Controller 1 Mailbox 24 Data 2 Register */
+#define                  CAN1_MB24_DATA3  0xffc0370c   /* CAN Controller 1 Mailbox 24 Data 3 Register */
+#define                 CAN1_MB24_LENGTH  0xffc03710   /* CAN Controller 1 Mailbox 24 Length Register */
+#define              CAN1_MB24_TIMESTAMP  0xffc03714   /* CAN Controller 1 Mailbox 24 Timestamp Register */
+#define                    CAN1_MB24_ID0  0xffc03718   /* CAN Controller 1 Mailbox 24 ID0 Register */
+#define                    CAN1_MB24_ID1  0xffc0371c   /* CAN Controller 1 Mailbox 24 ID1 Register */
+#define                  CAN1_MB25_DATA0  0xffc03720   /* CAN Controller 1 Mailbox 25 Data 0 Register */
+#define                  CAN1_MB25_DATA1  0xffc03724   /* CAN Controller 1 Mailbox 25 Data 1 Register */
+#define                  CAN1_MB25_DATA2  0xffc03728   /* CAN Controller 1 Mailbox 25 Data 2 Register */
+#define                  CAN1_MB25_DATA3  0xffc0372c   /* CAN Controller 1 Mailbox 25 Data 3 Register */
+#define                 CAN1_MB25_LENGTH  0xffc03730   /* CAN Controller 1 Mailbox 25 Length Register */
+#define              CAN1_MB25_TIMESTAMP  0xffc03734   /* CAN Controller 1 Mailbox 25 Timestamp Register */
+#define                    CAN1_MB25_ID0  0xffc03738   /* CAN Controller 1 Mailbox 25 ID0 Register */
+#define                    CAN1_MB25_ID1  0xffc0373c   /* CAN Controller 1 Mailbox 25 ID1 Register */
+#define                  CAN1_MB26_DATA0  0xffc03740   /* CAN Controller 1 Mailbox 26 Data 0 Register */
+#define                  CAN1_MB26_DATA1  0xffc03744   /* CAN Controller 1 Mailbox 26 Data 1 Register */
+#define                  CAN1_MB26_DATA2  0xffc03748   /* CAN Controller 1 Mailbox 26 Data 2 Register */
+#define                  CAN1_MB26_DATA3  0xffc0374c   /* CAN Controller 1 Mailbox 26 Data 3 Register */
+#define                 CAN1_MB26_LENGTH  0xffc03750   /* CAN Controller 1 Mailbox 26 Length Register */
+#define              CAN1_MB26_TIMESTAMP  0xffc03754   /* CAN Controller 1 Mailbox 26 Timestamp Register */
+#define                    CAN1_MB26_ID0  0xffc03758   /* CAN Controller 1 Mailbox 26 ID0 Register */
+#define                    CAN1_MB26_ID1  0xffc0375c   /* CAN Controller 1 Mailbox 26 ID1 Register */
+#define                  CAN1_MB27_DATA0  0xffc03760   /* CAN Controller 1 Mailbox 27 Data 0 Register */
+#define                  CAN1_MB27_DATA1  0xffc03764   /* CAN Controller 1 Mailbox 27 Data 1 Register */
+#define                  CAN1_MB27_DATA2  0xffc03768   /* CAN Controller 1 Mailbox 27 Data 2 Register */
+#define                  CAN1_MB27_DATA3  0xffc0376c   /* CAN Controller 1 Mailbox 27 Data 3 Register */
+#define                 CAN1_MB27_LENGTH  0xffc03770   /* CAN Controller 1 Mailbox 27 Length Register */
+#define              CAN1_MB27_TIMESTAMP  0xffc03774   /* CAN Controller 1 Mailbox 27 Timestamp Register */
+#define                    CAN1_MB27_ID0  0xffc03778   /* CAN Controller 1 Mailbox 27 ID0 Register */
+#define                    CAN1_MB27_ID1  0xffc0377c   /* CAN Controller 1 Mailbox 27 ID1 Register */
+#define                  CAN1_MB28_DATA0  0xffc03780   /* CAN Controller 1 Mailbox 28 Data 0 Register */
+#define                  CAN1_MB28_DATA1  0xffc03784   /* CAN Controller 1 Mailbox 28 Data 1 Register */
+#define                  CAN1_MB28_DATA2  0xffc03788   /* CAN Controller 1 Mailbox 28 Data 2 Register */
+#define                  CAN1_MB28_DATA3  0xffc0378c   /* CAN Controller 1 Mailbox 28 Data 3 Register */
+#define                 CAN1_MB28_LENGTH  0xffc03790   /* CAN Controller 1 Mailbox 28 Length Register */
+#define              CAN1_MB28_TIMESTAMP  0xffc03794   /* CAN Controller 1 Mailbox 28 Timestamp Register */
+#define                    CAN1_MB28_ID0  0xffc03798   /* CAN Controller 1 Mailbox 28 ID0 Register */
+#define                    CAN1_MB28_ID1  0xffc0379c   /* CAN Controller 1 Mailbox 28 ID1 Register */
+#define                  CAN1_MB29_DATA0  0xffc037a0   /* CAN Controller 1 Mailbox 29 Data 0 Register */
+#define                  CAN1_MB29_DATA1  0xffc037a4   /* CAN Controller 1 Mailbox 29 Data 1 Register */
+#define                  CAN1_MB29_DATA2  0xffc037a8   /* CAN Controller 1 Mailbox 29 Data 2 Register */
+#define                  CAN1_MB29_DATA3  0xffc037ac   /* CAN Controller 1 Mailbox 29 Data 3 Register */
+#define                 CAN1_MB29_LENGTH  0xffc037b0   /* CAN Controller 1 Mailbox 29 Length Register */
+#define              CAN1_MB29_TIMESTAMP  0xffc037b4   /* CAN Controller 1 Mailbox 29 Timestamp Register */
+#define                    CAN1_MB29_ID0  0xffc037b8   /* CAN Controller 1 Mailbox 29 ID0 Register */
+#define                    CAN1_MB29_ID1  0xffc037bc   /* CAN Controller 1 Mailbox 29 ID1 Register */
+#define                  CAN1_MB30_DATA0  0xffc037c0   /* CAN Controller 1 Mailbox 30 Data 0 Register */
+#define                  CAN1_MB30_DATA1  0xffc037c4   /* CAN Controller 1 Mailbox 30 Data 1 Register */
+#define                  CAN1_MB30_DATA2  0xffc037c8   /* CAN Controller 1 Mailbox 30 Data 2 Register */
+#define                  CAN1_MB30_DATA3  0xffc037cc   /* CAN Controller 1 Mailbox 30 Data 3 Register */
+#define                 CAN1_MB30_LENGTH  0xffc037d0   /* CAN Controller 1 Mailbox 30 Length Register */
+#define              CAN1_MB30_TIMESTAMP  0xffc037d4   /* CAN Controller 1 Mailbox 30 Timestamp Register */
+#define                    CAN1_MB30_ID0  0xffc037d8   /* CAN Controller 1 Mailbox 30 ID0 Register */
+#define                    CAN1_MB30_ID1  0xffc037dc   /* CAN Controller 1 Mailbox 30 ID1 Register */
+#define                  CAN1_MB31_DATA0  0xffc037e0   /* CAN Controller 1 Mailbox 31 Data 0 Register */
+#define                  CAN1_MB31_DATA1  0xffc037e4   /* CAN Controller 1 Mailbox 31 Data 1 Register */
+#define                  CAN1_MB31_DATA2  0xffc037e8   /* CAN Controller 1 Mailbox 31 Data 2 Register */
+#define                  CAN1_MB31_DATA3  0xffc037ec   /* CAN Controller 1 Mailbox 31 Data 3 Register */
+#define                 CAN1_MB31_LENGTH  0xffc037f0   /* CAN Controller 1 Mailbox 31 Length Register */
+#define              CAN1_MB31_TIMESTAMP  0xffc037f4   /* CAN Controller 1 Mailbox 31 Timestamp Register */
+#define                    CAN1_MB31_ID0  0xffc037f8   /* CAN Controller 1 Mailbox 31 ID0 Register */
+#define                    CAN1_MB31_ID1  0xffc037fc   /* CAN Controller 1 Mailbox 31 ID1 Register */
+
+/* ATAPI Registers */
+
+#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
+#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
+#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
+#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
+#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
+#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
+#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
+#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
+#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
+#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
+#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
+#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
+#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
+#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
+#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
+#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
+#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
+#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
+#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
+#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
+#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
+#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
+#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
+
+/* SDH Registers */
+
+#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
+#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
+#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
+#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
+#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
+#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
+#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
+#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
+#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
+#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
+#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
+#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
+#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
+#define                       SDH_STATUS  0xffc03934   /* SDH Status */
+#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
+#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
+#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
+#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
+#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
+#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
+#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
+#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
+#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
+#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
+#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
+#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
+#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
+#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
+#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
+#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
+#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03c00   /* Function address register */
+#define                        USB_POWER  0xffc03c04   /* Power management register */
+#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03c20   /* USB frame number */
+#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
+#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
+#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+
+/* USB Endpoint 1 Control Registers */
+
+#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+
+/* USB Endpoint 2 Control Registers */
+
+#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+
+/* USB Endpoint 3 Control Registers */
+
+#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+
+/* USB Endpoint 4 Control Registers */
+
+#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+
+/* USB Endpoint 5 Control Registers */
+
+#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+
+/* USB Endpoint 6 Control Registers */
+
+#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
+#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+
+/* USB Endpoint 7 Control Registers */
+
+#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Keypad Registers */
+
+#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
+#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
+#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
+#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
+#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
+#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
+
+/* Pixel Compositor (PIXC) Registers */
+
+#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
+#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
+#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
+#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
+#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
+#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
+#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
+#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
+#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
+#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
+#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
+#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
+#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
+#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
+#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
+#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
+#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
+#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
+#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
+
+/* Handshake MDMA 0 Registers */
+
+#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
+#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
+#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
+#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
+#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
+
+/* Handshake MDMA 1 Registers */
+
+#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
+#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
+#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
+#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
+#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for PIXC_CTL */
+
+#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
+#define                  OVR_A_EN  0x2        /* Overlay A Enable */
+#define                  OVR_B_EN  0x4        /* Overlay B Enable */
+#define                  IMG_FORM  0x8        /* Image Data Format */
+#define                  OVR_FORM  0x10       /* Overlay Data Format */
+#define                  OUT_FORM  0x20       /* Output Data Format */
+#define                   UDS_MOD  0x40       /* Resampling Mode */
+#define                     TC_EN  0x80       /* Transparent Color Enable */
+#define                  IMG_STAT  0x300      /* Image FIFO Status */
+#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
+#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
+
+/* Bit masks for PIXC_AHSTART */
+
+#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_AHEND */
+
+#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_AVSTART */
+
+#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_AVEND */
+
+#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_ATRANSP */
+
+#define                  A_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_BHSTART */
+
+#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_BHEND */
+
+#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_BVSTART */
+
+#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_BVEND */
+
+#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_BTRANSP */
+
+#define                  B_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_INTRSTAT */
+
+#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
+#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
+#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
+#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
+
+/* Bit masks for PIXC_RYCON */
+
+#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
+#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
+#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
+#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_GUCON */
+
+#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
+#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
+#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
+#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_BVCON */
+
+#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
+#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
+#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
+#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_CCBIAS */
+
+#define                       A14  0x3ff      /* A14 in the Bias Vector */
+#define                       A24  0xffc00    /* A24 in the Bias Vector */
+#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
+
+/* Bit masks for PIXC_TC */
+
+#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
+#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
+#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
+
+/* Bit masks for HOST_CONTROL */
+
+#define                   HOST_EN  0x1        /* Host Enable */
+#define                  HOST_END  0x2        /* Host Endianess */
+#define                 DATA_SIZE  0x4        /* Data Size */
+#define                  HOST_RST  0x8        /* Host Reset */
+#define                  HRDY_OVR  0x20       /* Host Ready Override */
+#define                  INT_MODE  0x40       /* Interrupt Mode */
+#define                     BT_EN  0x80       /* Bus Timeout Enable */
+#define                       EHW  0x100      /* Enable Host Write */
+#define                       EHR  0x200      /* Enable Host Read */
+#define                       BDR  0x400      /* Burst DMA Requests */
+
+/* Bit masks for HOST_STATUS */
+
+#define                 DMA_READY  0x1        /* DMA Ready */
+#define                  FIFOFULL  0x2        /* FIFO Full */
+#define                 FIFOEMPTY  0x4        /* FIFO Empty */
+#define              DMA_COMPLETE  0x8        /* DMA Complete */
+#define                      HSHK  0x10       /* Host Handshake */
+#define                 HSTIMEOUT  0x20       /* Host Timeout */
+#define                      HIRQ  0x40       /* Host Interrupt Request */
+#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define                   DMA_DIR  0x100      /* DMA Direction */
+#define                       BTE  0x200      /* Bus Timeout Enabled */
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+
+/* Bit masks for KPAD_CTL */
+
+#define                   KPAD_EN  0x1        /* Keypad Enable */
+#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
+#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
+#define                KPAD_COLEN  0xe000     /* Column Enable Width */
+
+/* Bit masks for KPAD_PRESCALE */
+
+#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
+
+/* Bit masks for KPAD_MSEL */
+
+#define                DBON_SCALE  0xff       /* Debounce Scale Value */
+#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
+
+/* Bit masks for KPAD_ROWCOL */
+
+#define                  KPAD_ROW  0xff       /* Rows Pressed */
+#define                  KPAD_COL  0xff00     /* Columns Pressed */
+
+/* Bit masks for KPAD_STAT */
+
+#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
+#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
+#define              KPAD_PRESSED  0x8        /* Key press current status */
+
+/* Bit masks for KPAD_SOFTEVAL */
+
+#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
+
+/* Bit masks for SDH_COMMAND */
+
+#define                   CMD_IDX  0x3f       /* Command Index */
+#define                   CMD_RSP  0x40       /* Response */
+#define                 CMD_L_RSP  0x80       /* Long Response */
+#define                 CMD_INT_E  0x100      /* Command Interrupt */
+#define                CMD_PEND_E  0x200      /* Command Pending */
+#define                     CMD_E  0x400      /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define                    PWR_ON  0x3        /* Power On */
+#if 0
+#define                       TBD  0x3c       /* TBD */
+#endif
+#define                 SD_CMD_OD  0x40       /* Open Drain Output */
+#define                   ROD_CTL  0x80       /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define                    CLKDIV  0xff       /* MC_CLK Divisor */
+#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
+#define                  PWR_SV_E  0x200      /* Power Save Enable */
+#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
+#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define                  RESP_CMD  0x3f       /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define                     DTX_E  0x1        /* Data Transfer Enable */
+#define                   DTX_DIR  0x2        /* Data Transfer Direction */
+#define                  DTX_MODE  0x4        /* Data Transfer Mode */
+#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
+#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
+#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
+#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
+#define                RX_OVERRUN  0x20       /* Receive Overrun */
+#define              CMD_RESP_END  0x40       /* CMD Response End */
+#define                  CMD_SENT  0x80       /* CMD Sent */
+#define                   DAT_END  0x100      /* Data End */
+#define             START_BIT_ERR  0x200      /* Start Bit Error */
+#define               DAT_BLK_END  0x400      /* Data Block End */
+#define                   CMD_ACT  0x800      /* CMD Active */
+#define                    TX_ACT  0x1000     /* Transmit Active */
+#define                    RX_ACT  0x2000     /* Receive Active */
+#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
+#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
+#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
+#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
+#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
+#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
+#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
+#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
+#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
+#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
+#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
+#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
+#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
+#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
+#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
+#define              DAT_END_STAT  0x100      /* Data End Status */
+#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
+#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
+#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
+#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
+#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
+#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
+#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
+#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
+#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
+#define              DAT_END_MASK  0x100      /* Data End Mask */
+#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
+#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
+#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
+#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
+#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
+#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
+#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
+#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
+#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
+#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
+#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
+#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
+#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define                FIFO_COUNT  0x7fff     /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
+#define               SD_CARD_DET  0x10       /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
+#define                   SCD_MSK  0x40       /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define                   CLKS_EN  0x1        /* Clocks Enable */
+#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
+#define                       MWE  0x8        /* Moving Window Enable */
+#define                    SD_RST  0x10       /* SDMMC Reset */
+#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
+#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
+#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define                       RWR  0x1        /* Read Wait Request */
+
+/* Bit masks for ATAPI_CONTROL */
+
+#define                 PIO_START  0x1        /* Start PIO/Reg Op */
+#define               MULTI_START  0x2        /* Start Multi-DMA Op */
+#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
+#define                  XFER_DIR  0x8        /* Transfer Direction */
+#define                  IORDY_EN  0x10       /* IORDY Enable */
+#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
+#define                  SOFT_RST  0x40       /* Soft Reset */
+#define                   DEV_RST  0x80       /* Device Reset */
+#define                TFRCNT_RST  0x100      /* Trans Count Reset */
+#define               END_ON_TERM  0x200      /* End/Terminate Select */
+#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
+#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
+
+/* Bit masks for ATAPI_STATUS */
+
+#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
+#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
+#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
+#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
+
+/* Bit masks for ATAPI_DEV_ADDR */
+
+#define                  DEV_ADDR  0x1f       /* Device Address */
+
+/* Bit masks for ATAPI_INT_MASK */
+
+#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
+#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
+#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
+#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
+#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
+#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
+#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
+#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
+#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
+
+/* Bit masks for ATAPI_INT_STATUS */
+
+#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
+#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
+#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
+#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
+#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
+#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
+#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
+#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
+#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
+
+/* Bit masks for ATAPI_LINE_STATUS */
+
+#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
+#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
+#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
+#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
+#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
+#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
+#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
+#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
+#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
+#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_SM_STATE */
+
+#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
+#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
+#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
+#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_TERMINATE */
+
+#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
+
+/* Bit masks for ATAPI_REG_TIM_0 */
+
+#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
+#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
+
+/* Bit masks for ATAPI_PIO_TIM_0 */
+
+#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
+#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
+#define                    T4_REG  0xf000     /* DIOW data hold */
+
+/* Bit masks for ATAPI_PIO_TIM_1 */
+
+#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
+
+/* Bit masks for ATAPI_MULTI_TIM_0 */
+
+#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
+#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
+
+/* Bit masks for ATAPI_MULTI_TIM_1 */
+
+#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
+#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
+
+/* Bit masks for ATAPI_MULTI_TIM_2 */
+
+#define                        TH  0xff       /* Selects DIOW data hold */
+#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
+
+/* Bit masks for ATAPI_ULTRA_TIM_0 */
+
+#define                      TACK  0xff       /* Selects setup and hold times for TACK */
+#define                      TENV  0xff00     /* Selects envelope time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_1 */
+
+#define                      TDVS  0xff       /* Selects data valid setup time */
+#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_2 */
+
+#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define                      TMLI  0xff00     /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define                      TZAH  0xff       /* Selects minimum delay required for output */
+#define               READY_PAUSE  0xff00     /* Selects ready to pause */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define                    TIMEN8  0x1        /* Timer 8 Enable */
+#define                    TIMEN9  0x2        /* Timer 9 Enable */
+#define                   TIMEN10  0x4        /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define                   TIMDIS8  0x1        /* Timer 8 Disable */
+#define                   TIMDIS9  0x2        /* Timer 9 Disable */
+#define                  TIMDIS10  0x4        /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
+#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
+#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
+#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
+#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
+#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
+#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
+#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
+#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define                     RESET  0x8        /* Reset indicator */
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                      MODE  0x4        /* DMA Bus error */
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for HMDMAx_CONTROL */
+
+#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
+#define                       REP  0x2        /* Handshake MDMA Request Polarity */
+#define                       UTE  0x8        /* Urgency Threshold Enable */
+#define                       OIE  0x10       /* Overflow Interrupt Enable */
+#define                      BDIE  0x20       /* Block Done Interrupt Enable */
+#define                      MBDI  0x40       /* Mask Block Done Interrupt */
+#define                       DRQ  0x300      /* Handshake MDMA Request Type */
+#define                       RBC  0x1000     /* Force Reload of BCOUNT */
+#define                        PS  0x2000     /* Pin Status */
+#define                        OI  0x4000     /* Overflow Interrupt Generated */
+#define                       BDI  0x8000     /* Block Done Interrupt Generated */
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+
+#endif /* _DEF_BF548_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
new file mode 100644
index 00000000000..09673454164
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -0,0 +1,2737 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/defBF549.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF549_H
+#define _DEF_BF549_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
+
+/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
+#include "defBF54x_base.h"
+
+/* The following are the #defines needed by ADSP-BF549 that are not in the common header */
+
+/* Timer Registers */
+
+#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
+#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
+#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
+#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
+#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
+#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
+#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
+#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
+#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
+#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
+#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
+#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
+
+/* Timer Group of 3 Registers */
+
+#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
+#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
+#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
+
+/* SPORT0 Registers */
+
+#define                      SPORT0_TCR1  0xffc00800   /* SPORT0 Transmit Configuration 1 Register */
+#define                      SPORT0_TCR2  0xffc00804   /* SPORT0 Transmit Configuration 2 Register */
+#define                   SPORT0_TCLKDIV  0xffc00808   /* SPORT0 Transmit Serial Clock Divider Register */
+#define                    SPORT0_TFSDIV  0xffc0080c   /* SPORT0 Transmit Frame Sync Divider Register */
+#define                        SPORT0_TX  0xffc00810   /* SPORT0 Transmit Data Register */
+#define                        SPORT0_RX  0xffc00818   /* SPORT0 Receive Data Register */
+#define                      SPORT0_RCR1  0xffc00820   /* SPORT0 Receive Configuration 1 Register */
+#define                      SPORT0_RCR2  0xffc00824   /* SPORT0 Receive Configuration 2 Register */
+#define                   SPORT0_RCLKDIV  0xffc00828   /* SPORT0 Receive Serial Clock Divider Register */
+#define                    SPORT0_RFSDIV  0xffc0082c   /* SPORT0 Receive Frame Sync Divider Register */
+#define                      SPORT0_STAT  0xffc00830   /* SPORT0 Status Register */
+#define                      SPORT0_CHNL  0xffc00834   /* SPORT0 Current Channel Register */
+#define                     SPORT0_MCMC1  0xffc00838   /* SPORT0 Multi channel Configuration Register 1 */
+#define                     SPORT0_MCMC2  0xffc0083c   /* SPORT0 Multi channel Configuration Register 2 */
+#define                     SPORT0_MTCS0  0xffc00840   /* SPORT0 Multi channel Transmit Select Register 0 */
+#define                     SPORT0_MTCS1  0xffc00844   /* SPORT0 Multi channel Transmit Select Register 1 */
+#define                     SPORT0_MTCS2  0xffc00848   /* SPORT0 Multi channel Transmit Select Register 2 */
+#define                     SPORT0_MTCS3  0xffc0084c   /* SPORT0 Multi channel Transmit Select Register 3 */
+#define                     SPORT0_MRCS0  0xffc00850   /* SPORT0 Multi channel Receive Select Register 0 */
+#define                     SPORT0_MRCS1  0xffc00854   /* SPORT0 Multi channel Receive Select Register 1 */
+#define                     SPORT0_MRCS2  0xffc00858   /* SPORT0 Multi channel Receive Select Register 2 */
+#define                     SPORT0_MRCS3  0xffc0085c   /* SPORT0 Multi channel Receive Select Register 3 */
+
+/* EPPI0 Registers */
+
+#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
+#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
+#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
+#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
+#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
+#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
+#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
+#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
+#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
+#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
+#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
+#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
+#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
+
+/* UART2 Registers */
+
+#define                        UART2_DLL  0xffc02100   /* Divisor Latch Low Byte */
+#define                        UART2_DLH  0xffc02104   /* Divisor Latch High Byte */
+#define                       UART2_GCTL  0xffc02108   /* Global Control Register */
+#define                        UART2_LCR  0xffc0210c   /* Line Control Register */
+#define                        UART2_MCR  0xffc02110   /* Modem Control Register */
+#define                        UART2_LSR  0xffc02114   /* Line Status Register */
+#define                        UART2_MSR  0xffc02118   /* Modem Status Register */
+#define                        UART2_SCR  0xffc0211c   /* Scratch Register */
+#define                    UART2_IER_SET  0xffc02120   /* Interrupt Enable Register Set */
+#define                  UART2_IER_CLEAR  0xffc02124   /* Interrupt Enable Register Clear */
+#define                        UART2_RBR  0xffc0212c   /* Receive Buffer Register */
+
+/* Two Wire Interface Registers (TWI1) */
+
+#define                     TWI1_REGBASE  0xffc02200
+#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
+#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
+#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
+#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
+#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
+#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
+#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
+#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
+#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
+#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* SPI2  Registers */
+
+#define                     SPI2_REGBASE  0xffc02400
+#define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
+#define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
+#define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
+#define                        SPI2_TDBR  0xffc0240c   /* SPI2 Transmit Data Buffer Register */
+#define                        SPI2_RDBR  0xffc02410   /* SPI2 Receive Data Buffer Register */
+#define                        SPI2_BAUD  0xffc02414   /* SPI2 Baud Rate Register */
+#define                      SPI2_SHADOW  0xffc02418   /* SPI2 Receive Data Buffer Shadow Register */
+
+/* MXVR Registers */
+
+#define                      MXVR_CONFIG  0xffc02700   /* MXVR Configuration Register */
+#define                     MXVR_STATE_0  0xffc02708   /* MXVR State Register 0 */
+#define                     MXVR_STATE_1  0xffc0270c   /* MXVR State Register 1 */
+#define                  MXVR_INT_STAT_0  0xffc02710   /* MXVR Interrupt Status Register 0 */
+#define                  MXVR_INT_STAT_1  0xffc02714   /* MXVR Interrupt Status Register 1 */
+#define                    MXVR_INT_EN_0  0xffc02718   /* MXVR Interrupt Enable Register 0 */
+#define                    MXVR_INT_EN_1  0xffc0271c   /* MXVR Interrupt Enable Register 1 */
+#define                    MXVR_POSITION  0xffc02720   /* MXVR Node Position Register */
+#define                MXVR_MAX_POSITION  0xffc02724   /* MXVR Maximum Node Position Register */
+#define                       MXVR_DELAY  0xffc02728   /* MXVR Node Frame Delay Register */
+#define                   MXVR_MAX_DELAY  0xffc0272c   /* MXVR Maximum Node Frame Delay Register */
+#define                       MXVR_LADDR  0xffc02730   /* MXVR Logical Address Register */
+#define                       MXVR_GADDR  0xffc02734   /* MXVR Group Address Register */
+#define                       MXVR_AADDR  0xffc02738   /* MXVR Alternate Address Register */
+
+/* MXVR Allocation Table Registers */
+
+#define                     MXVR_ALLOC_0  0xffc0273c   /* MXVR Allocation Table Register 0 */
+#define                     MXVR_ALLOC_1  0xffc02740   /* MXVR Allocation Table Register 1 */
+#define                     MXVR_ALLOC_2  0xffc02744   /* MXVR Allocation Table Register 2 */
+#define                     MXVR_ALLOC_3  0xffc02748   /* MXVR Allocation Table Register 3 */
+#define                     MXVR_ALLOC_4  0xffc0274c   /* MXVR Allocation Table Register 4 */
+#define                     MXVR_ALLOC_5  0xffc02750   /* MXVR Allocation Table Register 5 */
+#define                     MXVR_ALLOC_6  0xffc02754   /* MXVR Allocation Table Register 6 */
+#define                     MXVR_ALLOC_7  0xffc02758   /* MXVR Allocation Table Register 7 */
+#define                     MXVR_ALLOC_8  0xffc0275c   /* MXVR Allocation Table Register 8 */
+#define                     MXVR_ALLOC_9  0xffc02760   /* MXVR Allocation Table Register 9 */
+#define                    MXVR_ALLOC_10  0xffc02764   /* MXVR Allocation Table Register 10 */
+#define                    MXVR_ALLOC_11  0xffc02768   /* MXVR Allocation Table Register 11 */
+#define                    MXVR_ALLOC_12  0xffc0276c   /* MXVR Allocation Table Register 12 */
+#define                    MXVR_ALLOC_13  0xffc02770   /* MXVR Allocation Table Register 13 */
+#define                    MXVR_ALLOC_14  0xffc02774   /* MXVR Allocation Table Register 14 */
+
+/* MXVR Channel Assign Registers */
+
+#define                MXVR_SYNC_LCHAN_0  0xffc02778   /* MXVR Sync Data Logical Channel Assign Register 0 */
+#define                MXVR_SYNC_LCHAN_1  0xffc0277c   /* MXVR Sync Data Logical Channel Assign Register 1 */
+#define                MXVR_SYNC_LCHAN_2  0xffc02780   /* MXVR Sync Data Logical Channel Assign Register 2 */
+#define                MXVR_SYNC_LCHAN_3  0xffc02784   /* MXVR Sync Data Logical Channel Assign Register 3 */
+#define                MXVR_SYNC_LCHAN_4  0xffc02788   /* MXVR Sync Data Logical Channel Assign Register 4 */
+#define                MXVR_SYNC_LCHAN_5  0xffc0278c   /* MXVR Sync Data Logical Channel Assign Register 5 */
+#define                MXVR_SYNC_LCHAN_6  0xffc02790   /* MXVR Sync Data Logical Channel Assign Register 6 */
+#define                MXVR_SYNC_LCHAN_7  0xffc02794   /* MXVR Sync Data Logical Channel Assign Register 7 */
+
+/* MXVR DMA0 Registers */
+
+#define                 MXVR_DMA0_CONFIG  0xffc02798   /* MXVR Sync Data DMA0 Config Register */
+#define             MXVR_DMA0_START_ADDR  0xffc0279c   /* MXVR Sync Data DMA0 Start Address */
+#define                  MXVR_DMA0_COUNT  0xffc027a0   /* MXVR Sync Data DMA0 Loop Count Register */
+#define              MXVR_DMA0_CURR_ADDR  0xffc027a4   /* MXVR Sync Data DMA0 Current Address */
+#define             MXVR_DMA0_CURR_COUNT  0xffc027a8   /* MXVR Sync Data DMA0 Current Loop Count */
+
+/* MXVR DMA1 Registers */
+
+#define                 MXVR_DMA1_CONFIG  0xffc027ac   /* MXVR Sync Data DMA1 Config Register */
+#define             MXVR_DMA1_START_ADDR  0xffc027b0   /* MXVR Sync Data DMA1 Start Address */
+#define                  MXVR_DMA1_COUNT  0xffc027b4   /* MXVR Sync Data DMA1 Loop Count Register */
+#define              MXVR_DMA1_CURR_ADDR  0xffc027b8   /* MXVR Sync Data DMA1 Current Address */
+#define             MXVR_DMA1_CURR_COUNT  0xffc027bc   /* MXVR Sync Data DMA1 Current Loop Count */
+
+/* MXVR DMA2 Registers */
+
+#define                 MXVR_DMA2_CONFIG  0xffc027c0   /* MXVR Sync Data DMA2 Config Register */
+#define             MXVR_DMA2_START_ADDR  0xffc027c4   /* MXVR Sync Data DMA2 Start Address */
+#define                  MXVR_DMA2_COUNT  0xffc027c8   /* MXVR Sync Data DMA2 Loop Count Register */
+#define              MXVR_DMA2_CURR_ADDR  0xffc027cc   /* MXVR Sync Data DMA2 Current Address */
+#define             MXVR_DMA2_CURR_COUNT  0xffc027d0   /* MXVR Sync Data DMA2 Current Loop Count */
+
+/* MXVR DMA3 Registers */
+
+#define                 MXVR_DMA3_CONFIG  0xffc027d4   /* MXVR Sync Data DMA3 Config Register */
+#define             MXVR_DMA3_START_ADDR  0xffc027d8   /* MXVR Sync Data DMA3 Start Address */
+#define                  MXVR_DMA3_COUNT  0xffc027dc   /* MXVR Sync Data DMA3 Loop Count Register */
+#define              MXVR_DMA3_CURR_ADDR  0xffc027e0   /* MXVR Sync Data DMA3 Current Address */
+#define             MXVR_DMA3_CURR_COUNT  0xffc027e4   /* MXVR Sync Data DMA3 Current Loop Count */
+
+/* MXVR DMA4 Registers */
+
+#define                 MXVR_DMA4_CONFIG  0xffc027e8   /* MXVR Sync Data DMA4 Config Register */
+#define             MXVR_DMA4_START_ADDR  0xffc027ec   /* MXVR Sync Data DMA4 Start Address */
+#define                  MXVR_DMA4_COUNT  0xffc027f0   /* MXVR Sync Data DMA4 Loop Count Register */
+#define              MXVR_DMA4_CURR_ADDR  0xffc027f4   /* MXVR Sync Data DMA4 Current Address */
+#define             MXVR_DMA4_CURR_COUNT  0xffc027f8   /* MXVR Sync Data DMA4 Current Loop Count */
+
+/* MXVR DMA5 Registers */
+
+#define                 MXVR_DMA5_CONFIG  0xffc027fc   /* MXVR Sync Data DMA5 Config Register */
+#define             MXVR_DMA5_START_ADDR  0xffc02800   /* MXVR Sync Data DMA5 Start Address */
+#define                  MXVR_DMA5_COUNT  0xffc02804   /* MXVR Sync Data DMA5 Loop Count Register */
+#define              MXVR_DMA5_CURR_ADDR  0xffc02808   /* MXVR Sync Data DMA5 Current Address */
+#define             MXVR_DMA5_CURR_COUNT  0xffc0280c   /* MXVR Sync Data DMA5 Current Loop Count */
+
+/* MXVR DMA6 Registers */
+
+#define                 MXVR_DMA6_CONFIG  0xffc02810   /* MXVR Sync Data DMA6 Config Register */
+#define             MXVR_DMA6_START_ADDR  0xffc02814   /* MXVR Sync Data DMA6 Start Address */
+#define                  MXVR_DMA6_COUNT  0xffc02818   /* MXVR Sync Data DMA6 Loop Count Register */
+#define              MXVR_DMA6_CURR_ADDR  0xffc0281c   /* MXVR Sync Data DMA6 Current Address */
+#define             MXVR_DMA6_CURR_COUNT  0xffc02820   /* MXVR Sync Data DMA6 Current Loop Count */
+
+/* MXVR DMA7 Registers */
+
+#define                 MXVR_DMA7_CONFIG  0xffc02824   /* MXVR Sync Data DMA7 Config Register */
+#define             MXVR_DMA7_START_ADDR  0xffc02828   /* MXVR Sync Data DMA7 Start Address */
+#define                  MXVR_DMA7_COUNT  0xffc0282c   /* MXVR Sync Data DMA7 Loop Count Register */
+#define              MXVR_DMA7_CURR_ADDR  0xffc02830   /* MXVR Sync Data DMA7 Current Address */
+#define             MXVR_DMA7_CURR_COUNT  0xffc02834   /* MXVR Sync Data DMA7 Current Loop Count */
+
+/* MXVR Asynch Packet Registers */
+
+#define                      MXVR_AP_CTL  0xffc02838   /* MXVR Async Packet Control Register */
+#define             MXVR_APRB_START_ADDR  0xffc0283c   /* MXVR Async Packet RX Buffer Start Addr Register */
+#define              MXVR_APRB_CURR_ADDR  0xffc02840   /* MXVR Async Packet RX Buffer Current Addr Register */
+#define             MXVR_APTB_START_ADDR  0xffc02844   /* MXVR Async Packet TX Buffer Start Addr Register */
+#define              MXVR_APTB_CURR_ADDR  0xffc02848   /* MXVR Async Packet TX Buffer Current Addr Register */
+
+/* MXVR Control Message Registers */
+
+#define                      MXVR_CM_CTL  0xffc0284c   /* MXVR Control Message Control Register */
+#define             MXVR_CMRB_START_ADDR  0xffc02850   /* MXVR Control Message RX Buffer Start Addr Register */
+#define              MXVR_CMRB_CURR_ADDR  0xffc02854   /* MXVR Control Message RX Buffer Current Address */
+#define             MXVR_CMTB_START_ADDR  0xffc02858   /* MXVR Control Message TX Buffer Start Addr Register */
+#define              MXVR_CMTB_CURR_ADDR  0xffc0285c   /* MXVR Control Message TX Buffer Current Address */
+
+/* MXVR Remote Read Registers */
+
+#define             MXVR_RRDB_START_ADDR  0xffc02860   /* MXVR Remote Read Buffer Start Addr Register */
+#define              MXVR_RRDB_CURR_ADDR  0xffc02864   /* MXVR Remote Read Buffer Current Addr Register */
+
+/* MXVR Pattern Data Registers */
+
+#define                  MXVR_PAT_DATA_0  0xffc02868   /* MXVR Pattern Data Register 0 */
+#define                    MXVR_PAT_EN_0  0xffc0286c   /* MXVR Pattern Enable Register 0 */
+#define                  MXVR_PAT_DATA_1  0xffc02870   /* MXVR Pattern Data Register 1 */
+#define                    MXVR_PAT_EN_1  0xffc02874   /* MXVR Pattern Enable Register 1 */
+
+/* MXVR Frame Counter Registers */
+
+#define                 MXVR_FRAME_CNT_0  0xffc02878   /* MXVR Frame Counter 0 */
+#define                 MXVR_FRAME_CNT_1  0xffc0287c   /* MXVR Frame Counter 1 */
+
+/* MXVR Routing Table Registers */
+
+#define                   MXVR_ROUTING_0  0xffc02880   /* MXVR Routing Table Register 0 */
+#define                   MXVR_ROUTING_1  0xffc02884   /* MXVR Routing Table Register 1 */
+#define                   MXVR_ROUTING_2  0xffc02888   /* MXVR Routing Table Register 2 */
+#define                   MXVR_ROUTING_3  0xffc0288c   /* MXVR Routing Table Register 3 */
+#define                   MXVR_ROUTING_4  0xffc02890   /* MXVR Routing Table Register 4 */
+#define                   MXVR_ROUTING_5  0xffc02894   /* MXVR Routing Table Register 5 */
+#define                   MXVR_ROUTING_6  0xffc02898   /* MXVR Routing Table Register 6 */
+#define                   MXVR_ROUTING_7  0xffc0289c   /* MXVR Routing Table Register 7 */
+#define                   MXVR_ROUTING_8  0xffc028a0   /* MXVR Routing Table Register 8 */
+#define                   MXVR_ROUTING_9  0xffc028a4   /* MXVR Routing Table Register 9 */
+#define                  MXVR_ROUTING_10  0xffc028a8   /* MXVR Routing Table Register 10 */
+#define                  MXVR_ROUTING_11  0xffc028ac   /* MXVR Routing Table Register 11 */
+#define                  MXVR_ROUTING_12  0xffc028b0   /* MXVR Routing Table Register 12 */
+#define                  MXVR_ROUTING_13  0xffc028b4   /* MXVR Routing Table Register 13 */
+#define                  MXVR_ROUTING_14  0xffc028b8   /* MXVR Routing Table Register 14 */
+
+/* MXVR Counter-Clock-Control Registers */
+
+#define                   MXVR_BLOCK_CNT  0xffc028c0   /* MXVR Block Counter */
+#define                     MXVR_CLK_CTL  0xffc028d0   /* MXVR Clock Control Register */
+#define                  MXVR_CDRPLL_CTL  0xffc028d4   /* MXVR Clock/Data Recovery PLL Control Register */
+#define                   MXVR_FMPLL_CTL  0xffc028d8   /* MXVR Frequency Multiply PLL Control Register */
+#define                     MXVR_PIN_CTL  0xffc028dc   /* MXVR Pin Control Register */
+#define                    MXVR_SCLK_CNT  0xffc028e0   /* MXVR System Clock Counter Register */
+
+/* CAN Controller 1 Config 1 Registers */
+
+#define                         CAN1_MC1  0xffc03200   /* CAN Controller 1 Mailbox Configuration Register 1 */
+#define                         CAN1_MD1  0xffc03204   /* CAN Controller 1 Mailbox Direction Register 1 */
+#define                        CAN1_TRS1  0xffc03208   /* CAN Controller 1 Transmit Request Set Register 1 */
+#define                        CAN1_TRR1  0xffc0320c   /* CAN Controller 1 Transmit Request Reset Register 1 */
+#define                         CAN1_TA1  0xffc03210   /* CAN Controller 1 Transmit Acknowledge Register 1 */
+#define                         CAN1_AA1  0xffc03214   /* CAN Controller 1 Abort Acknowledge Register 1 */
+#define                        CAN1_RMP1  0xffc03218   /* CAN Controller 1 Receive Message Pending Register 1 */
+#define                        CAN1_RML1  0xffc0321c   /* CAN Controller 1 Receive Message Lost Register 1 */
+#define                      CAN1_MBTIF1  0xffc03220   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
+#define                      CAN1_MBRIF1  0xffc03224   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
+#define                       CAN1_MBIM1  0xffc03228   /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
+#define                        CAN1_RFH1  0xffc0322c   /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
+#define                       CAN1_OPSS1  0xffc03230   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
+
+/* CAN Controller 1 Config 2 Registers */
+
+#define                         CAN1_MC2  0xffc03240   /* CAN Controller 1 Mailbox Configuration Register 2 */
+#define                         CAN1_MD2  0xffc03244   /* CAN Controller 1 Mailbox Direction Register 2 */
+#define                        CAN1_TRS2  0xffc03248   /* CAN Controller 1 Transmit Request Set Register 2 */
+#define                        CAN1_TRR2  0xffc0324c   /* CAN Controller 1 Transmit Request Reset Register 2 */
+#define                         CAN1_TA2  0xffc03250   /* CAN Controller 1 Transmit Acknowledge Register 2 */
+#define                         CAN1_AA2  0xffc03254   /* CAN Controller 1 Abort Acknowledge Register 2 */
+#define                        CAN1_RMP2  0xffc03258   /* CAN Controller 1 Receive Message Pending Register 2 */
+#define                        CAN1_RML2  0xffc0325c   /* CAN Controller 1 Receive Message Lost Register 2 */
+#define                      CAN1_MBTIF2  0xffc03260   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
+#define                      CAN1_MBRIF2  0xffc03264   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
+#define                       CAN1_MBIM2  0xffc03268   /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
+#define                        CAN1_RFH2  0xffc0326c   /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
+#define                       CAN1_OPSS2  0xffc03270   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
+
+/* CAN Controller 1 Clock/Interrupt/Counter Registers */
+
+#define                       CAN1_CLOCK  0xffc03280   /* CAN Controller 1 Clock Register */
+#define                      CAN1_TIMING  0xffc03284   /* CAN Controller 1 Timing Register */
+#define                       CAN1_DEBUG  0xffc03288   /* CAN Controller 1 Debug Register */
+#define                      CAN1_STATUS  0xffc0328c   /* CAN Controller 1 Global Status Register */
+#define                         CAN1_CEC  0xffc03290   /* CAN Controller 1 Error Counter Register */
+#define                         CAN1_GIS  0xffc03294   /* CAN Controller 1 Global Interrupt Status Register */
+#define                         CAN1_GIM  0xffc03298   /* CAN Controller 1 Global Interrupt Mask Register */
+#define                         CAN1_GIF  0xffc0329c   /* CAN Controller 1 Global Interrupt Flag Register */
+#define                     CAN1_CONTROL  0xffc032a0   /* CAN Controller 1 Master Control Register */
+#define                        CAN1_INTR  0xffc032a4   /* CAN Controller 1 Interrupt Pending Register */
+#define                        CAN1_MBTD  0xffc032ac   /* CAN Controller 1 Mailbox Temporary Disable Register */
+#define                         CAN1_EWR  0xffc032b0   /* CAN Controller 1 Programmable Warning Level Register */
+#define                         CAN1_ESR  0xffc032b4   /* CAN Controller 1 Error Status Register */
+#define                       CAN1_UCCNT  0xffc032c4   /* CAN Controller 1 Universal Counter Register */
+#define                        CAN1_UCRC  0xffc032c8   /* CAN Controller 1 Universal Counter Force Reload Register */
+#define                       CAN1_UCCNF  0xffc032cc   /* CAN Controller 1 Universal Counter Configuration Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM00L  0xffc03300   /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
+#define                       CAN1_AM00H  0xffc03304   /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
+#define                       CAN1_AM01L  0xffc03308   /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
+#define                       CAN1_AM01H  0xffc0330c   /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
+#define                       CAN1_AM02L  0xffc03310   /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
+#define                       CAN1_AM02H  0xffc03314   /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
+#define                       CAN1_AM03L  0xffc03318   /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
+#define                       CAN1_AM03H  0xffc0331c   /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
+#define                       CAN1_AM04L  0xffc03320   /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
+#define                       CAN1_AM04H  0xffc03324   /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
+#define                       CAN1_AM05L  0xffc03328   /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
+#define                       CAN1_AM05H  0xffc0332c   /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
+#define                       CAN1_AM06L  0xffc03330   /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
+#define                       CAN1_AM06H  0xffc03334   /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
+#define                       CAN1_AM07L  0xffc03338   /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
+#define                       CAN1_AM07H  0xffc0333c   /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
+#define                       CAN1_AM08L  0xffc03340   /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
+#define                       CAN1_AM08H  0xffc03344   /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
+#define                       CAN1_AM09L  0xffc03348   /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
+#define                       CAN1_AM09H  0xffc0334c   /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
+#define                       CAN1_AM10L  0xffc03350   /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
+#define                       CAN1_AM10H  0xffc03354   /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
+#define                       CAN1_AM11L  0xffc03358   /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
+#define                       CAN1_AM11H  0xffc0335c   /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
+#define                       CAN1_AM12L  0xffc03360   /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
+#define                       CAN1_AM12H  0xffc03364   /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
+#define                       CAN1_AM13L  0xffc03368   /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
+#define                       CAN1_AM13H  0xffc0336c   /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
+#define                       CAN1_AM14L  0xffc03370   /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
+#define                       CAN1_AM14H  0xffc03374   /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
+#define                       CAN1_AM15L  0xffc03378   /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
+#define                       CAN1_AM15H  0xffc0337c   /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Acceptance Registers */
+
+#define                       CAN1_AM16L  0xffc03380   /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
+#define                       CAN1_AM16H  0xffc03384   /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
+#define                       CAN1_AM17L  0xffc03388   /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
+#define                       CAN1_AM17H  0xffc0338c   /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
+#define                       CAN1_AM18L  0xffc03390   /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
+#define                       CAN1_AM18H  0xffc03394   /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
+#define                       CAN1_AM19L  0xffc03398   /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
+#define                       CAN1_AM19H  0xffc0339c   /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
+#define                       CAN1_AM20L  0xffc033a0   /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
+#define                       CAN1_AM20H  0xffc033a4   /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
+#define                       CAN1_AM21L  0xffc033a8   /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
+#define                       CAN1_AM21H  0xffc033ac   /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
+#define                       CAN1_AM22L  0xffc033b0   /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
+#define                       CAN1_AM22H  0xffc033b4   /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
+#define                       CAN1_AM23L  0xffc033b8   /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
+#define                       CAN1_AM23H  0xffc033bc   /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
+#define                       CAN1_AM24L  0xffc033c0   /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
+#define                       CAN1_AM24H  0xffc033c4   /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
+#define                       CAN1_AM25L  0xffc033c8   /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
+#define                       CAN1_AM25H  0xffc033cc   /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
+#define                       CAN1_AM26L  0xffc033d0   /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
+#define                       CAN1_AM26H  0xffc033d4   /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
+#define                       CAN1_AM27L  0xffc033d8   /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
+#define                       CAN1_AM27H  0xffc033dc   /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
+#define                       CAN1_AM28L  0xffc033e0   /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
+#define                       CAN1_AM28H  0xffc033e4   /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
+#define                       CAN1_AM29L  0xffc033e8   /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
+#define                       CAN1_AM29H  0xffc033ec   /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
+#define                       CAN1_AM30L  0xffc033f0   /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
+#define                       CAN1_AM30H  0xffc033f4   /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
+#define                       CAN1_AM31L  0xffc033f8   /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
+#define                       CAN1_AM31H  0xffc033fc   /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB00_DATA0  0xffc03400   /* CAN Controller 1 Mailbox 0 Data 0 Register */
+#define                  CAN1_MB00_DATA1  0xffc03404   /* CAN Controller 1 Mailbox 0 Data 1 Register */
+#define                  CAN1_MB00_DATA2  0xffc03408   /* CAN Controller 1 Mailbox 0 Data 2 Register */
+#define                  CAN1_MB00_DATA3  0xffc0340c   /* CAN Controller 1 Mailbox 0 Data 3 Register */
+#define                 CAN1_MB00_LENGTH  0xffc03410   /* CAN Controller 1 Mailbox 0 Length Register */
+#define              CAN1_MB00_TIMESTAMP  0xffc03414   /* CAN Controller 1 Mailbox 0 Timestamp Register */
+#define                    CAN1_MB00_ID0  0xffc03418   /* CAN Controller 1 Mailbox 0 ID0 Register */
+#define                    CAN1_MB00_ID1  0xffc0341c   /* CAN Controller 1 Mailbox 0 ID1 Register */
+#define                  CAN1_MB01_DATA0  0xffc03420   /* CAN Controller 1 Mailbox 1 Data 0 Register */
+#define                  CAN1_MB01_DATA1  0xffc03424   /* CAN Controller 1 Mailbox 1 Data 1 Register */
+#define                  CAN1_MB01_DATA2  0xffc03428   /* CAN Controller 1 Mailbox 1 Data 2 Register */
+#define                  CAN1_MB01_DATA3  0xffc0342c   /* CAN Controller 1 Mailbox 1 Data 3 Register */
+#define                 CAN1_MB01_LENGTH  0xffc03430   /* CAN Controller 1 Mailbox 1 Length Register */
+#define              CAN1_MB01_TIMESTAMP  0xffc03434   /* CAN Controller 1 Mailbox 1 Timestamp Register */
+#define                    CAN1_MB01_ID0  0xffc03438   /* CAN Controller 1 Mailbox 1 ID0 Register */
+#define                    CAN1_MB01_ID1  0xffc0343c   /* CAN Controller 1 Mailbox 1 ID1 Register */
+#define                  CAN1_MB02_DATA0  0xffc03440   /* CAN Controller 1 Mailbox 2 Data 0 Register */
+#define                  CAN1_MB02_DATA1  0xffc03444   /* CAN Controller 1 Mailbox 2 Data 1 Register */
+#define                  CAN1_MB02_DATA2  0xffc03448   /* CAN Controller 1 Mailbox 2 Data 2 Register */
+#define                  CAN1_MB02_DATA3  0xffc0344c   /* CAN Controller 1 Mailbox 2 Data 3 Register */
+#define                 CAN1_MB02_LENGTH  0xffc03450   /* CAN Controller 1 Mailbox 2 Length Register */
+#define              CAN1_MB02_TIMESTAMP  0xffc03454   /* CAN Controller 1 Mailbox 2 Timestamp Register */
+#define                    CAN1_MB02_ID0  0xffc03458   /* CAN Controller 1 Mailbox 2 ID0 Register */
+#define                    CAN1_MB02_ID1  0xffc0345c   /* CAN Controller 1 Mailbox 2 ID1 Register */
+#define                  CAN1_MB03_DATA0  0xffc03460   /* CAN Controller 1 Mailbox 3 Data 0 Register */
+#define                  CAN1_MB03_DATA1  0xffc03464   /* CAN Controller 1 Mailbox 3 Data 1 Register */
+#define                  CAN1_MB03_DATA2  0xffc03468   /* CAN Controller 1 Mailbox 3 Data 2 Register */
+#define                  CAN1_MB03_DATA3  0xffc0346c   /* CAN Controller 1 Mailbox 3 Data 3 Register */
+#define                 CAN1_MB03_LENGTH  0xffc03470   /* CAN Controller 1 Mailbox 3 Length Register */
+#define              CAN1_MB03_TIMESTAMP  0xffc03474   /* CAN Controller 1 Mailbox 3 Timestamp Register */
+#define                    CAN1_MB03_ID0  0xffc03478   /* CAN Controller 1 Mailbox 3 ID0 Register */
+#define                    CAN1_MB03_ID1  0xffc0347c   /* CAN Controller 1 Mailbox 3 ID1 Register */
+#define                  CAN1_MB04_DATA0  0xffc03480   /* CAN Controller 1 Mailbox 4 Data 0 Register */
+#define                  CAN1_MB04_DATA1  0xffc03484   /* CAN Controller 1 Mailbox 4 Data 1 Register */
+#define                  CAN1_MB04_DATA2  0xffc03488   /* CAN Controller 1 Mailbox 4 Data 2 Register */
+#define                  CAN1_MB04_DATA3  0xffc0348c   /* CAN Controller 1 Mailbox 4 Data 3 Register */
+#define                 CAN1_MB04_LENGTH  0xffc03490   /* CAN Controller 1 Mailbox 4 Length Register */
+#define              CAN1_MB04_TIMESTAMP  0xffc03494   /* CAN Controller 1 Mailbox 4 Timestamp Register */
+#define                    CAN1_MB04_ID0  0xffc03498   /* CAN Controller 1 Mailbox 4 ID0 Register */
+#define                    CAN1_MB04_ID1  0xffc0349c   /* CAN Controller 1 Mailbox 4 ID1 Register */
+#define                  CAN1_MB05_DATA0  0xffc034a0   /* CAN Controller 1 Mailbox 5 Data 0 Register */
+#define                  CAN1_MB05_DATA1  0xffc034a4   /* CAN Controller 1 Mailbox 5 Data 1 Register */
+#define                  CAN1_MB05_DATA2  0xffc034a8   /* CAN Controller 1 Mailbox 5 Data 2 Register */
+#define                  CAN1_MB05_DATA3  0xffc034ac   /* CAN Controller 1 Mailbox 5 Data 3 Register */
+#define                 CAN1_MB05_LENGTH  0xffc034b0   /* CAN Controller 1 Mailbox 5 Length Register */
+#define              CAN1_MB05_TIMESTAMP  0xffc034b4   /* CAN Controller 1 Mailbox 5 Timestamp Register */
+#define                    CAN1_MB05_ID0  0xffc034b8   /* CAN Controller 1 Mailbox 5 ID0 Register */
+#define                    CAN1_MB05_ID1  0xffc034bc   /* CAN Controller 1 Mailbox 5 ID1 Register */
+#define                  CAN1_MB06_DATA0  0xffc034c0   /* CAN Controller 1 Mailbox 6 Data 0 Register */
+#define                  CAN1_MB06_DATA1  0xffc034c4   /* CAN Controller 1 Mailbox 6 Data 1 Register */
+#define                  CAN1_MB06_DATA2  0xffc034c8   /* CAN Controller 1 Mailbox 6 Data 2 Register */
+#define                  CAN1_MB06_DATA3  0xffc034cc   /* CAN Controller 1 Mailbox 6 Data 3 Register */
+#define                 CAN1_MB06_LENGTH  0xffc034d0   /* CAN Controller 1 Mailbox 6 Length Register */
+#define              CAN1_MB06_TIMESTAMP  0xffc034d4   /* CAN Controller 1 Mailbox 6 Timestamp Register */
+#define                    CAN1_MB06_ID0  0xffc034d8   /* CAN Controller 1 Mailbox 6 ID0 Register */
+#define                    CAN1_MB06_ID1  0xffc034dc   /* CAN Controller 1 Mailbox 6 ID1 Register */
+#define                  CAN1_MB07_DATA0  0xffc034e0   /* CAN Controller 1 Mailbox 7 Data 0 Register */
+#define                  CAN1_MB07_DATA1  0xffc034e4   /* CAN Controller 1 Mailbox 7 Data 1 Register */
+#define                  CAN1_MB07_DATA2  0xffc034e8   /* CAN Controller 1 Mailbox 7 Data 2 Register */
+#define                  CAN1_MB07_DATA3  0xffc034ec   /* CAN Controller 1 Mailbox 7 Data 3 Register */
+#define                 CAN1_MB07_LENGTH  0xffc034f0   /* CAN Controller 1 Mailbox 7 Length Register */
+#define              CAN1_MB07_TIMESTAMP  0xffc034f4   /* CAN Controller 1 Mailbox 7 Timestamp Register */
+#define                    CAN1_MB07_ID0  0xffc034f8   /* CAN Controller 1 Mailbox 7 ID0 Register */
+#define                    CAN1_MB07_ID1  0xffc034fc   /* CAN Controller 1 Mailbox 7 ID1 Register */
+#define                  CAN1_MB08_DATA0  0xffc03500   /* CAN Controller 1 Mailbox 8 Data 0 Register */
+#define                  CAN1_MB08_DATA1  0xffc03504   /* CAN Controller 1 Mailbox 8 Data 1 Register */
+#define                  CAN1_MB08_DATA2  0xffc03508   /* CAN Controller 1 Mailbox 8 Data 2 Register */
+#define                  CAN1_MB08_DATA3  0xffc0350c   /* CAN Controller 1 Mailbox 8 Data 3 Register */
+#define                 CAN1_MB08_LENGTH  0xffc03510   /* CAN Controller 1 Mailbox 8 Length Register */
+#define              CAN1_MB08_TIMESTAMP  0xffc03514   /* CAN Controller 1 Mailbox 8 Timestamp Register */
+#define                    CAN1_MB08_ID0  0xffc03518   /* CAN Controller 1 Mailbox 8 ID0 Register */
+#define                    CAN1_MB08_ID1  0xffc0351c   /* CAN Controller 1 Mailbox 8 ID1 Register */
+#define                  CAN1_MB09_DATA0  0xffc03520   /* CAN Controller 1 Mailbox 9 Data 0 Register */
+#define                  CAN1_MB09_DATA1  0xffc03524   /* CAN Controller 1 Mailbox 9 Data 1 Register */
+#define                  CAN1_MB09_DATA2  0xffc03528   /* CAN Controller 1 Mailbox 9 Data 2 Register */
+#define                  CAN1_MB09_DATA3  0xffc0352c   /* CAN Controller 1 Mailbox 9 Data 3 Register */
+#define                 CAN1_MB09_LENGTH  0xffc03530   /* CAN Controller 1 Mailbox 9 Length Register */
+#define              CAN1_MB09_TIMESTAMP  0xffc03534   /* CAN Controller 1 Mailbox 9 Timestamp Register */
+#define                    CAN1_MB09_ID0  0xffc03538   /* CAN Controller 1 Mailbox 9 ID0 Register */
+#define                    CAN1_MB09_ID1  0xffc0353c   /* CAN Controller 1 Mailbox 9 ID1 Register */
+#define                  CAN1_MB10_DATA0  0xffc03540   /* CAN Controller 1 Mailbox 10 Data 0 Register */
+#define                  CAN1_MB10_DATA1  0xffc03544   /* CAN Controller 1 Mailbox 10 Data 1 Register */
+#define                  CAN1_MB10_DATA2  0xffc03548   /* CAN Controller 1 Mailbox 10 Data 2 Register */
+#define                  CAN1_MB10_DATA3  0xffc0354c   /* CAN Controller 1 Mailbox 10 Data 3 Register */
+#define                 CAN1_MB10_LENGTH  0xffc03550   /* CAN Controller 1 Mailbox 10 Length Register */
+#define              CAN1_MB10_TIMESTAMP  0xffc03554   /* CAN Controller 1 Mailbox 10 Timestamp Register */
+#define                    CAN1_MB10_ID0  0xffc03558   /* CAN Controller 1 Mailbox 10 ID0 Register */
+#define                    CAN1_MB10_ID1  0xffc0355c   /* CAN Controller 1 Mailbox 10 ID1 Register */
+#define                  CAN1_MB11_DATA0  0xffc03560   /* CAN Controller 1 Mailbox 11 Data 0 Register */
+#define                  CAN1_MB11_DATA1  0xffc03564   /* CAN Controller 1 Mailbox 11 Data 1 Register */
+#define                  CAN1_MB11_DATA2  0xffc03568   /* CAN Controller 1 Mailbox 11 Data 2 Register */
+#define                  CAN1_MB11_DATA3  0xffc0356c   /* CAN Controller 1 Mailbox 11 Data 3 Register */
+#define                 CAN1_MB11_LENGTH  0xffc03570   /* CAN Controller 1 Mailbox 11 Length Register */
+#define              CAN1_MB11_TIMESTAMP  0xffc03574   /* CAN Controller 1 Mailbox 11 Timestamp Register */
+#define                    CAN1_MB11_ID0  0xffc03578   /* CAN Controller 1 Mailbox 11 ID0 Register */
+#define                    CAN1_MB11_ID1  0xffc0357c   /* CAN Controller 1 Mailbox 11 ID1 Register */
+#define                  CAN1_MB12_DATA0  0xffc03580   /* CAN Controller 1 Mailbox 12 Data 0 Register */
+#define                  CAN1_MB12_DATA1  0xffc03584   /* CAN Controller 1 Mailbox 12 Data 1 Register */
+#define                  CAN1_MB12_DATA2  0xffc03588   /* CAN Controller 1 Mailbox 12 Data 2 Register */
+#define                  CAN1_MB12_DATA3  0xffc0358c   /* CAN Controller 1 Mailbox 12 Data 3 Register */
+#define                 CAN1_MB12_LENGTH  0xffc03590   /* CAN Controller 1 Mailbox 12 Length Register */
+#define              CAN1_MB12_TIMESTAMP  0xffc03594   /* CAN Controller 1 Mailbox 12 Timestamp Register */
+#define                    CAN1_MB12_ID0  0xffc03598   /* CAN Controller 1 Mailbox 12 ID0 Register */
+#define                    CAN1_MB12_ID1  0xffc0359c   /* CAN Controller 1 Mailbox 12 ID1 Register */
+#define                  CAN1_MB13_DATA0  0xffc035a0   /* CAN Controller 1 Mailbox 13 Data 0 Register */
+#define                  CAN1_MB13_DATA1  0xffc035a4   /* CAN Controller 1 Mailbox 13 Data 1 Register */
+#define                  CAN1_MB13_DATA2  0xffc035a8   /* CAN Controller 1 Mailbox 13 Data 2 Register */
+#define                  CAN1_MB13_DATA3  0xffc035ac   /* CAN Controller 1 Mailbox 13 Data 3 Register */
+#define                 CAN1_MB13_LENGTH  0xffc035b0   /* CAN Controller 1 Mailbox 13 Length Register */
+#define              CAN1_MB13_TIMESTAMP  0xffc035b4   /* CAN Controller 1 Mailbox 13 Timestamp Register */
+#define                    CAN1_MB13_ID0  0xffc035b8   /* CAN Controller 1 Mailbox 13 ID0 Register */
+#define                    CAN1_MB13_ID1  0xffc035bc   /* CAN Controller 1 Mailbox 13 ID1 Register */
+#define                  CAN1_MB14_DATA0  0xffc035c0   /* CAN Controller 1 Mailbox 14 Data 0 Register */
+#define                  CAN1_MB14_DATA1  0xffc035c4   /* CAN Controller 1 Mailbox 14 Data 1 Register */
+#define                  CAN1_MB14_DATA2  0xffc035c8   /* CAN Controller 1 Mailbox 14 Data 2 Register */
+#define                  CAN1_MB14_DATA3  0xffc035cc   /* CAN Controller 1 Mailbox 14 Data 3 Register */
+#define                 CAN1_MB14_LENGTH  0xffc035d0   /* CAN Controller 1 Mailbox 14 Length Register */
+#define              CAN1_MB14_TIMESTAMP  0xffc035d4   /* CAN Controller 1 Mailbox 14 Timestamp Register */
+#define                    CAN1_MB14_ID0  0xffc035d8   /* CAN Controller 1 Mailbox 14 ID0 Register */
+#define                    CAN1_MB14_ID1  0xffc035dc   /* CAN Controller 1 Mailbox 14 ID1 Register */
+#define                  CAN1_MB15_DATA0  0xffc035e0   /* CAN Controller 1 Mailbox 15 Data 0 Register */
+#define                  CAN1_MB15_DATA1  0xffc035e4   /* CAN Controller 1 Mailbox 15 Data 1 Register */
+#define                  CAN1_MB15_DATA2  0xffc035e8   /* CAN Controller 1 Mailbox 15 Data 2 Register */
+#define                  CAN1_MB15_DATA3  0xffc035ec   /* CAN Controller 1 Mailbox 15 Data 3 Register */
+#define                 CAN1_MB15_LENGTH  0xffc035f0   /* CAN Controller 1 Mailbox 15 Length Register */
+#define              CAN1_MB15_TIMESTAMP  0xffc035f4   /* CAN Controller 1 Mailbox 15 Timestamp Register */
+#define                    CAN1_MB15_ID0  0xffc035f8   /* CAN Controller 1 Mailbox 15 ID0 Register */
+#define                    CAN1_MB15_ID1  0xffc035fc   /* CAN Controller 1 Mailbox 15 ID1 Register */
+
+/* CAN Controller 1 Mailbox Data Registers */
+
+#define                  CAN1_MB16_DATA0  0xffc03600   /* CAN Controller 1 Mailbox 16 Data 0 Register */
+#define                  CAN1_MB16_DATA1  0xffc03604   /* CAN Controller 1 Mailbox 16 Data 1 Register */
+#define                  CAN1_MB16_DATA2  0xffc03608   /* CAN Controller 1 Mailbox 16 Data 2 Register */
+#define                  CAN1_MB16_DATA3  0xffc0360c   /* CAN Controller 1 Mailbox 16 Data 3 Register */
+#define                 CAN1_MB16_LENGTH  0xffc03610   /* CAN Controller 1 Mailbox 16 Length Register */
+#define              CAN1_MB16_TIMESTAMP  0xffc03614   /* CAN Controller 1 Mailbox 16 Timestamp Register */
+#define                    CAN1_MB16_ID0  0xffc03618   /* CAN Controller 1 Mailbox 16 ID0 Register */
+#define                    CAN1_MB16_ID1  0xffc0361c   /* CAN Controller 1 Mailbox 16 ID1 Register */
+#define                  CAN1_MB17_DATA0  0xffc03620   /* CAN Controller 1 Mailbox 17 Data 0 Register */
+#define                  CAN1_MB17_DATA1  0xffc03624   /* CAN Controller 1 Mailbox 17 Data 1 Register */
+#define                  CAN1_MB17_DATA2  0xffc03628   /* CAN Controller 1 Mailbox 17 Data 2 Register */
+#define                  CAN1_MB17_DATA3  0xffc0362c   /* CAN Controller 1 Mailbox 17 Data 3 Register */
+#define                 CAN1_MB17_LENGTH  0xffc03630   /* CAN Controller 1 Mailbox 17 Length Register */
+#define              CAN1_MB17_TIMESTAMP  0xffc03634   /* CAN Controller 1 Mailbox 17 Timestamp Register */
+#define                    CAN1_MB17_ID0  0xffc03638   /* CAN Controller 1 Mailbox 17 ID0 Register */
+#define                    CAN1_MB17_ID1  0xffc0363c   /* CAN Controller 1 Mailbox 17 ID1 Register */
+#define                  CAN1_MB18_DATA0  0xffc03640   /* CAN Controller 1 Mailbox 18 Data 0 Register */
+#define                  CAN1_MB18_DATA1  0xffc03644   /* CAN Controller 1 Mailbox 18 Data 1 Register */
+#define                  CAN1_MB18_DATA2  0xffc03648   /* CAN Controller 1 Mailbox 18 Data 2 Register */
+#define                  CAN1_MB18_DATA3  0xffc0364c   /* CAN Controller 1 Mailbox 18 Data 3 Register */
+#define                 CAN1_MB18_LENGTH  0xffc03650   /* CAN Controller 1 Mailbox 18 Length Register */
+#define              CAN1_MB18_TIMESTAMP  0xffc03654   /* CAN Controller 1 Mailbox 18 Timestamp Register */
+#define                    CAN1_MB18_ID0  0xffc03658   /* CAN Controller 1 Mailbox 18 ID0 Register */
+#define                    CAN1_MB18_ID1  0xffc0365c   /* CAN Controller 1 Mailbox 18 ID1 Register */
+#define                  CAN1_MB19_DATA0  0xffc03660   /* CAN Controller 1 Mailbox 19 Data 0 Register */
+#define                  CAN1_MB19_DATA1  0xffc03664   /* CAN Controller 1 Mailbox 19 Data 1 Register */
+#define                  CAN1_MB19_DATA2  0xffc03668   /* CAN Controller 1 Mailbox 19 Data 2 Register */
+#define                  CAN1_MB19_DATA3  0xffc0366c   /* CAN Controller 1 Mailbox 19 Data 3 Register */
+#define                 CAN1_MB19_LENGTH  0xffc03670   /* CAN Controller 1 Mailbox 19 Length Register */
+#define              CAN1_MB19_TIMESTAMP  0xffc03674   /* CAN Controller 1 Mailbox 19 Timestamp Register */
+#define                    CAN1_MB19_ID0  0xffc03678   /* CAN Controller 1 Mailbox 19 ID0 Register */
+#define                    CAN1_MB19_ID1  0xffc0367c   /* CAN Controller 1 Mailbox 19 ID1 Register */
+#define                  CAN1_MB20_DATA0  0xffc03680   /* CAN Controller 1 Mailbox 20 Data 0 Register */
+#define                  CAN1_MB20_DATA1  0xffc03684   /* CAN Controller 1 Mailbox 20 Data 1 Register */
+#define                  CAN1_MB20_DATA2  0xffc03688   /* CAN Controller 1 Mailbox 20 Data 2 Register */
+#define                  CAN1_MB20_DATA3  0xffc0368c   /* CAN Controller 1 Mailbox 20 Data 3 Register */
+#define                 CAN1_MB20_LENGTH  0xffc03690   /* CAN Controller 1 Mailbox 20 Length Register */
+#define              CAN1_MB20_TIMESTAMP  0xffc03694   /* CAN Controller 1 Mailbox 20 Timestamp Register */
+#define                    CAN1_MB20_ID0  0xffc03698   /* CAN Controller 1 Mailbox 20 ID0 Register */
+#define                    CAN1_MB20_ID1  0xffc0369c   /* CAN Controller 1 Mailbox 20 ID1 Register */
+#define                  CAN1_MB21_DATA0  0xffc036a0   /* CAN Controller 1 Mailbox 21 Data 0 Register */
+#define                  CAN1_MB21_DATA1  0xffc036a4   /* CAN Controller 1 Mailbox 21 Data 1 Register */
+#define                  CAN1_MB21_DATA2  0xffc036a8   /* CAN Controller 1 Mailbox 21 Data 2 Register */
+#define                  CAN1_MB21_DATA3  0xffc036ac   /* CAN Controller 1 Mailbox 21 Data 3 Register */
+#define                 CAN1_MB21_LENGTH  0xffc036b0   /* CAN Controller 1 Mailbox 21 Length Register */
+#define              CAN1_MB21_TIMESTAMP  0xffc036b4   /* CAN Controller 1 Mailbox 21 Timestamp Register */
+#define                    CAN1_MB21_ID0  0xffc036b8   /* CAN Controller 1 Mailbox 21 ID0 Register */
+#define                    CAN1_MB21_ID1  0xffc036bc   /* CAN Controller 1 Mailbox 21 ID1 Register */
+#define                  CAN1_MB22_DATA0  0xffc036c0   /* CAN Controller 1 Mailbox 22 Data 0 Register */
+#define                  CAN1_MB22_DATA1  0xffc036c4   /* CAN Controller 1 Mailbox 22 Data 1 Register */
+#define                  CAN1_MB22_DATA2  0xffc036c8   /* CAN Controller 1 Mailbox 22 Data 2 Register */
+#define                  CAN1_MB22_DATA3  0xffc036cc   /* CAN Controller 1 Mailbox 22 Data 3 Register */
+#define                 CAN1_MB22_LENGTH  0xffc036d0   /* CAN Controller 1 Mailbox 22 Length Register */
+#define              CAN1_MB22_TIMESTAMP  0xffc036d4   /* CAN Controller 1 Mailbox 22 Timestamp Register */
+#define                    CAN1_MB22_ID0  0xffc036d8   /* CAN Controller 1 Mailbox 22 ID0 Register */
+#define                    CAN1_MB22_ID1  0xffc036dc   /* CAN Controller 1 Mailbox 22 ID1 Register */
+#define                  CAN1_MB23_DATA0  0xffc036e0   /* CAN Controller 1 Mailbox 23 Data 0 Register */
+#define                  CAN1_MB23_DATA1  0xffc036e4   /* CAN Controller 1 Mailbox 23 Data 1 Register */
+#define                  CAN1_MB23_DATA2  0xffc036e8   /* CAN Controller 1 Mailbox 23 Data 2 Register */
+#define                  CAN1_MB23_DATA3  0xffc036ec   /* CAN Controller 1 Mailbox 23 Data 3 Register */
+#define                 CAN1_MB23_LENGTH  0xffc036f0   /* CAN Controller 1 Mailbox 23 Length Register */
+#define              CAN1_MB23_TIMESTAMP  0xffc036f4   /* CAN Controller 1 Mailbox 23 Timestamp Register */
+#define                    CAN1_MB23_ID0  0xffc036f8   /* CAN Controller 1 Mailbox 23 ID0 Register */
+#define                    CAN1_MB23_ID1  0xffc036fc   /* CAN Controller 1 Mailbox 23 ID1 Register */
+#define                  CAN1_MB24_DATA0  0xffc03700   /* CAN Controller 1 Mailbox 24 Data 0 Register */
+#define                  CAN1_MB24_DATA1  0xffc03704   /* CAN Controller 1 Mailbox 24 Data 1 Register */
+#define                  CAN1_MB24_DATA2  0xffc03708   /* CAN Controller 1 Mailbox 24 Data 2 Register */
+#define                  CAN1_MB24_DATA3  0xffc0370c   /* CAN Controller 1 Mailbox 24 Data 3 Register */
+#define                 CAN1_MB24_LENGTH  0xffc03710   /* CAN Controller 1 Mailbox 24 Length Register */
+#define              CAN1_MB24_TIMESTAMP  0xffc03714   /* CAN Controller 1 Mailbox 24 Timestamp Register */
+#define                    CAN1_MB24_ID0  0xffc03718   /* CAN Controller 1 Mailbox 24 ID0 Register */
+#define                    CAN1_MB24_ID1  0xffc0371c   /* CAN Controller 1 Mailbox 24 ID1 Register */
+#define                  CAN1_MB25_DATA0  0xffc03720   /* CAN Controller 1 Mailbox 25 Data 0 Register */
+#define                  CAN1_MB25_DATA1  0xffc03724   /* CAN Controller 1 Mailbox 25 Data 1 Register */
+#define                  CAN1_MB25_DATA2  0xffc03728   /* CAN Controller 1 Mailbox 25 Data 2 Register */
+#define                  CAN1_MB25_DATA3  0xffc0372c   /* CAN Controller 1 Mailbox 25 Data 3 Register */
+#define                 CAN1_MB25_LENGTH  0xffc03730   /* CAN Controller 1 Mailbox 25 Length Register */
+#define              CAN1_MB25_TIMESTAMP  0xffc03734   /* CAN Controller 1 Mailbox 25 Timestamp Register */
+#define                    CAN1_MB25_ID0  0xffc03738   /* CAN Controller 1 Mailbox 25 ID0 Register */
+#define                    CAN1_MB25_ID1  0xffc0373c   /* CAN Controller 1 Mailbox 25 ID1 Register */
+#define                  CAN1_MB26_DATA0  0xffc03740   /* CAN Controller 1 Mailbox 26 Data 0 Register */
+#define                  CAN1_MB26_DATA1  0xffc03744   /* CAN Controller 1 Mailbox 26 Data 1 Register */
+#define                  CAN1_MB26_DATA2  0xffc03748   /* CAN Controller 1 Mailbox 26 Data 2 Register */
+#define                  CAN1_MB26_DATA3  0xffc0374c   /* CAN Controller 1 Mailbox 26 Data 3 Register */
+#define                 CAN1_MB26_LENGTH  0xffc03750   /* CAN Controller 1 Mailbox 26 Length Register */
+#define              CAN1_MB26_TIMESTAMP  0xffc03754   /* CAN Controller 1 Mailbox 26 Timestamp Register */
+#define                    CAN1_MB26_ID0  0xffc03758   /* CAN Controller 1 Mailbox 26 ID0 Register */
+#define                    CAN1_MB26_ID1  0xffc0375c   /* CAN Controller 1 Mailbox 26 ID1 Register */
+#define                  CAN1_MB27_DATA0  0xffc03760   /* CAN Controller 1 Mailbox 27 Data 0 Register */
+#define                  CAN1_MB27_DATA1  0xffc03764   /* CAN Controller 1 Mailbox 27 Data 1 Register */
+#define                  CAN1_MB27_DATA2  0xffc03768   /* CAN Controller 1 Mailbox 27 Data 2 Register */
+#define                  CAN1_MB27_DATA3  0xffc0376c   /* CAN Controller 1 Mailbox 27 Data 3 Register */
+#define                 CAN1_MB27_LENGTH  0xffc03770   /* CAN Controller 1 Mailbox 27 Length Register */
+#define              CAN1_MB27_TIMESTAMP  0xffc03774   /* CAN Controller 1 Mailbox 27 Timestamp Register */
+#define                    CAN1_MB27_ID0  0xffc03778   /* CAN Controller 1 Mailbox 27 ID0 Register */
+#define                    CAN1_MB27_ID1  0xffc0377c   /* CAN Controller 1 Mailbox 27 ID1 Register */
+#define                  CAN1_MB28_DATA0  0xffc03780   /* CAN Controller 1 Mailbox 28 Data 0 Register */
+#define                  CAN1_MB28_DATA1  0xffc03784   /* CAN Controller 1 Mailbox 28 Data 1 Register */
+#define                  CAN1_MB28_DATA2  0xffc03788   /* CAN Controller 1 Mailbox 28 Data 2 Register */
+#define                  CAN1_MB28_DATA3  0xffc0378c   /* CAN Controller 1 Mailbox 28 Data 3 Register */
+#define                 CAN1_MB28_LENGTH  0xffc03790   /* CAN Controller 1 Mailbox 28 Length Register */
+#define              CAN1_MB28_TIMESTAMP  0xffc03794   /* CAN Controller 1 Mailbox 28 Timestamp Register */
+#define                    CAN1_MB28_ID0  0xffc03798   /* CAN Controller 1 Mailbox 28 ID0 Register */
+#define                    CAN1_MB28_ID1  0xffc0379c   /* CAN Controller 1 Mailbox 28 ID1 Register */
+#define                  CAN1_MB29_DATA0  0xffc037a0   /* CAN Controller 1 Mailbox 29 Data 0 Register */
+#define                  CAN1_MB29_DATA1  0xffc037a4   /* CAN Controller 1 Mailbox 29 Data 1 Register */
+#define                  CAN1_MB29_DATA2  0xffc037a8   /* CAN Controller 1 Mailbox 29 Data 2 Register */
+#define                  CAN1_MB29_DATA3  0xffc037ac   /* CAN Controller 1 Mailbox 29 Data 3 Register */
+#define                 CAN1_MB29_LENGTH  0xffc037b0   /* CAN Controller 1 Mailbox 29 Length Register */
+#define              CAN1_MB29_TIMESTAMP  0xffc037b4   /* CAN Controller 1 Mailbox 29 Timestamp Register */
+#define                    CAN1_MB29_ID0  0xffc037b8   /* CAN Controller 1 Mailbox 29 ID0 Register */
+#define                    CAN1_MB29_ID1  0xffc037bc   /* CAN Controller 1 Mailbox 29 ID1 Register */
+#define                  CAN1_MB30_DATA0  0xffc037c0   /* CAN Controller 1 Mailbox 30 Data 0 Register */
+#define                  CAN1_MB30_DATA1  0xffc037c4   /* CAN Controller 1 Mailbox 30 Data 1 Register */
+#define                  CAN1_MB30_DATA2  0xffc037c8   /* CAN Controller 1 Mailbox 30 Data 2 Register */
+#define                  CAN1_MB30_DATA3  0xffc037cc   /* CAN Controller 1 Mailbox 30 Data 3 Register */
+#define                 CAN1_MB30_LENGTH  0xffc037d0   /* CAN Controller 1 Mailbox 30 Length Register */
+#define              CAN1_MB30_TIMESTAMP  0xffc037d4   /* CAN Controller 1 Mailbox 30 Timestamp Register */
+#define                    CAN1_MB30_ID0  0xffc037d8   /* CAN Controller 1 Mailbox 30 ID0 Register */
+#define                    CAN1_MB30_ID1  0xffc037dc   /* CAN Controller 1 Mailbox 30 ID1 Register */
+#define                  CAN1_MB31_DATA0  0xffc037e0   /* CAN Controller 1 Mailbox 31 Data 0 Register */
+#define                  CAN1_MB31_DATA1  0xffc037e4   /* CAN Controller 1 Mailbox 31 Data 1 Register */
+#define                  CAN1_MB31_DATA2  0xffc037e8   /* CAN Controller 1 Mailbox 31 Data 2 Register */
+#define                  CAN1_MB31_DATA3  0xffc037ec   /* CAN Controller 1 Mailbox 31 Data 3 Register */
+#define                 CAN1_MB31_LENGTH  0xffc037f0   /* CAN Controller 1 Mailbox 31 Length Register */
+#define              CAN1_MB31_TIMESTAMP  0xffc037f4   /* CAN Controller 1 Mailbox 31 Timestamp Register */
+#define                    CAN1_MB31_ID0  0xffc037f8   /* CAN Controller 1 Mailbox 31 ID0 Register */
+#define                    CAN1_MB31_ID1  0xffc037fc   /* CAN Controller 1 Mailbox 31 ID1 Register */
+
+/* ATAPI Registers */
+
+#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
+#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
+#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
+#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
+#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
+#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
+#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
+#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
+#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
+#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
+#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
+#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
+#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
+#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
+#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
+#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
+#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
+#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
+#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
+#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
+#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
+#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
+#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
+#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
+
+/* SDH Registers */
+
+#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
+#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
+#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
+#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
+#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
+#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
+#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
+#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
+#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
+#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
+#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
+#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
+#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
+#define                       SDH_STATUS  0xffc03934   /* SDH Status */
+#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
+#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
+#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
+#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
+#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
+#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
+#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
+#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
+#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
+#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
+#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
+#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
+#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
+#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
+#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
+#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
+#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
+
+/* HOST Port Registers */
+
+#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
+#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
+#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
+
+/* USB Control Registers */
+
+#define                        USB_FADDR  0xffc03c00   /* Function address register */
+#define                        USB_POWER  0xffc03c04   /* Power management register */
+#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
+#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
+#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
+#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
+#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
+#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
+#define                        USB_FRAME  0xffc03c20   /* USB frame number */
+#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
+#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
+#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
+#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
+
+/* USB Packet Control Registers */
+
+#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
+#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
+#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
+#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
+#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
+#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
+#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
+#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
+#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
+#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* USB Endpoint FIFO Registers */
+
+#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
+#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
+#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
+#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
+#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
+#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
+#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
+#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
+
+/* USB OTG Control Registers */
+
+#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
+#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
+#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
+
+/* USB Phy Control Registers */
+
+#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
+#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
+#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
+#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
+#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
+
+/* (APHY_CNTRL is for ADI usage only) */
+
+#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
+
+/* (APHY_CALIB is for ADI usage only) */
+
+#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
+#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
+
+/* (PHY_TEST is for ADI usage only) */
+
+#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
+#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
+#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
+
+/* USB Endpoint 0 Control Registers */
+
+#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
+#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
+#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
+#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
+#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
+#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
+#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
+#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
+#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
+
+/* USB Endpoint 1 Control Registers */
+
+#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
+#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
+#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
+#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
+#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
+#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
+#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
+#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
+#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
+#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
+
+/* USB Endpoint 2 Control Registers */
+
+#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
+#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
+#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
+#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
+#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
+#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
+#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
+#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
+#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
+#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
+
+/* USB Endpoint 3 Control Registers */
+
+#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
+#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
+#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
+#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
+#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
+#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
+#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
+#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
+#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
+#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
+
+/* USB Endpoint 4 Control Registers */
+
+#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
+#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
+#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
+#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
+#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
+#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
+#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
+#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
+#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
+#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
+
+/* USB Endpoint 5 Control Registers */
+
+#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
+#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
+#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
+#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
+#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
+#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
+#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
+#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
+#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
+#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
+
+/* USB Endpoint 6 Control Registers */
+
+#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
+#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
+#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
+#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
+#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
+#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
+#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
+#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
+#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
+#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
+
+/* USB Endpoint 7 Control Registers */
+
+#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
+#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
+#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
+#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
+#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
+#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
+#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
+#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
+#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
+#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
+#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
+#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
+
+/* USB Channel 0 Config Registers */
+
+#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
+#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
+#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
+#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
+
+/* USB Channel 1 Config Registers */
+
+#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
+#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
+#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
+#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
+
+/* USB Channel 2 Config Registers */
+
+#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
+#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
+#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
+#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
+
+/* USB Channel 3 Config Registers */
+
+#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
+#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
+#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
+#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
+
+/* USB Channel 4 Config Registers */
+
+#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
+#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
+#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
+#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
+
+/* USB Channel 5 Config Registers */
+
+#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
+#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
+#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
+#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
+
+/* USB Channel 6 Config Registers */
+
+#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
+#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
+#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
+#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
+
+/* USB Channel 7 Config Registers */
+
+#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
+#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
+#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
+#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
+
+/* Keypad Registers */
+
+#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
+#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
+#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
+#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
+#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
+#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
+
+/* Pixel Compositor (PIXC) Registers */
+
+#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
+#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
+#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
+#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
+#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
+#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
+#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
+#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
+#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
+#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
+#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
+#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
+#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
+#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
+#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
+#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
+#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
+#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
+#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
+
+/* Handshake MDMA 0 Registers */
+
+#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
+#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
+#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
+#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
+#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
+#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
+
+/* Handshake MDMA 1 Registers */
+
+#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
+#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
+#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
+#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
+#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
+#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
+
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* Bit masks for PIXC_CTL */
+
+#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
+#define                  OVR_A_EN  0x2        /* Overlay A Enable */
+#define                  OVR_B_EN  0x4        /* Overlay B Enable */
+#define                  IMG_FORM  0x8        /* Image Data Format */
+#define                  OVR_FORM  0x10       /* Overlay Data Format */
+#define                  OUT_FORM  0x20       /* Output Data Format */
+#define                   UDS_MOD  0x40       /* Resampling Mode */
+#define                     TC_EN  0x80       /* Transparent Color Enable */
+#define                  IMG_STAT  0x300      /* Image FIFO Status */
+#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
+#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
+
+/* Bit masks for PIXC_AHSTART */
+
+#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_AHEND */
+
+#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_AVSTART */
+
+#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_AVEND */
+
+#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_ATRANSP */
+
+#define                  A_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_BHSTART */
+
+#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
+
+/* Bit masks for PIXC_BHEND */
+
+#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
+
+/* Bit masks for PIXC_BVSTART */
+
+#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
+
+/* Bit masks for PIXC_BVEND */
+
+#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
+
+/* Bit masks for PIXC_BTRANSP */
+
+#define                  B_TRANSP  0xf        /* Transparency Value */
+
+/* Bit masks for PIXC_INTRSTAT */
+
+#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
+#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
+#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
+#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
+
+/* Bit masks for PIXC_RYCON */
+
+#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
+#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
+#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
+#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_GUCON */
+
+#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
+#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
+#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
+#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_BVCON */
+
+#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
+#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
+#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
+#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
+
+/* Bit masks for PIXC_CCBIAS */
+
+#define                       A14  0x3ff      /* A14 in the Bias Vector */
+#define                       A24  0xffc00    /* A24 in the Bias Vector */
+#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
+
+/* Bit masks for PIXC_TC */
+
+#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
+#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
+#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
+
+/* Bit masks for HOST_CONTROL */
+
+#define                   HOST_EN  0x1        /* Host Enable */
+#define                  HOST_END  0x2        /* Host Endianess */
+#define                 DATA_SIZE  0x4        /* Data Size */
+#define                  HOST_RST  0x8        /* Host Reset */
+#define                  HRDY_OVR  0x20       /* Host Ready Override */
+#define                  INT_MODE  0x40       /* Interrupt Mode */
+#define                     BT_EN  0x80       /* Bus Timeout Enable */
+#define                       EHW  0x100      /* Enable Host Write */
+#define                       EHR  0x200      /* Enable Host Read */
+#define                       BDR  0x400      /* Burst DMA Requests */
+
+/* Bit masks for HOST_STATUS */
+
+#define                 DMA_READY  0x1        /* DMA Ready */
+#define                  FIFOFULL  0x2        /* FIFO Full */
+#define                 FIFOEMPTY  0x4        /* FIFO Empty */
+#define              DMA_COMPLETE  0x8        /* DMA Complete */
+#define                      HSHK  0x10       /* Host Handshake */
+#define                   TIMEOUT  0x20       /* Host Timeout */
+#define                      HIRQ  0x40       /* Host Interrupt Request */
+#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
+#define                   DMA_DIR  0x100      /* DMA Direction */
+#define                       BTE  0x200      /* Bus Timeout Enabled */
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
+
+/* Bit masks for MXVR_CONFIG */
+
+#define                    MXVREN  0x1        /* MXVR Enable */
+#define                      MMSM  0x2        /* MXVR Master/Slave Mode Select */
+#define                    ACTIVE  0x4        /* Active Mode */
+#define                    SDELAY  0x8        /* Synchronous Data Delay */
+#define                   NCMRXEN  0x10       /* Normal Control Message Receive Enable */
+#define                   RWRRXEN  0x20       /* Remote Write Receive Enable */
+#define                     MTXEN  0x40       /* MXVR Transmit Data Enable */
+#define                    MTXONB  0x80       /* MXVR Phy Transmitter On */
+#define                   EPARITY  0x100      /* Even Parity Select */
+#define                       MSB  0x1e00     /* Master Synchronous Boundary */
+#define                    APRXEN  0x2000     /* Asynchronous Packet Receive Enable */
+#define                    WAKEUP  0x4000     /* Wake-Up */
+#define                     LMECH  0x8000     /* Lock Mechanism Select */
+
+/* Bit masks for MXVR_STATE_0 */
+
+#define                      NACT  0x1        /* Network Activity */
+#define                    SBLOCK  0x2        /* Super Block Lock */
+#define                   FMPLLST  0xc        /* Frequency Multiply PLL SM State */
+#define                  CDRPLLST  0xe0       /* Clock/Data Recovery PLL SM State */
+#define                     APBSY  0x100      /* Asynchronous Packet Transmit Buffer Busy */
+#define                     APARB  0x200      /* Asynchronous Packet Arbitrating */
+#define                      APTX  0x400      /* Asynchronous Packet Transmitting */
+#define                      APRX  0x800      /* Receiving Asynchronous Packet */
+#define                     CMBSY  0x1000     /* Control Message Transmit Buffer Busy */
+#define                     CMARB  0x2000     /* Control Message Arbitrating */
+#define                      CMTX  0x4000     /* Control Message Transmitting */
+#define                      CMRX  0x8000     /* Receiving Control Message */
+#define                    MRXONB  0x10000    /* MRXONB Pin State */
+#define                     RGSIP  0x20000    /* Remote Get Source In Progress */
+#define                     DALIP  0x40000    /* Resource Deallocate In Progress */
+#define                      ALIP  0x80000    /* Resource Allocate In Progress */
+#define                     RRDIP  0x100000   /* Remote Read In Progress */
+#define                     RWRIP  0x200000   /* Remote Write In Progress */
+#define                     FLOCK  0x400000   /* Frame Lock */
+#define                     BLOCK  0x800000   /* Block Lock */
+#define                       RSB  0xf000000  /* Received Synchronous Boundary */
+#define                   DERRNUM  0xf0000000 /* DMA Error Channel Number */
+
+/* Bit masks for MXVR_STATE_1 */
+
+#define                   SRXNUMB  0xf        /* Synchronous Receive FIFO Number of Bytes */
+#define                   STXNUMB  0xf0       /* Synchronous Transmit FIFO Number of Bytes */
+#define                    APCONT  0x100      /* Asynchronous Packet Continuation */
+#define                  OBERRNUM  0xe00      /* DMA Out of Bounds Error Channel Number */
+#define                DMAACTIVE0  0x10000    /* DMA0 Active */
+#define                DMAACTIVE1  0x20000    /* DMA1 Active */
+#define                DMAACTIVE2  0x40000    /* DMA2 Active */
+#define                DMAACTIVE3  0x80000    /* DMA3 Active */
+#define                DMAACTIVE4  0x100000   /* DMA4 Active */
+#define                DMAACTIVE5  0x200000   /* DMA5 Active */
+#define                DMAACTIVE6  0x400000   /* DMA6 Active */
+#define                DMAACTIVE7  0x800000   /* DMA7 Active */
+#define                  DMAPMEN0  0x1000000  /* DMA0 Pattern Matching Enabled */
+#define                  DMAPMEN1  0x2000000  /* DMA1 Pattern Matching Enabled */
+#define                  DMAPMEN2  0x4000000  /* DMA2 Pattern Matching Enabled */
+#define                  DMAPMEN3  0x8000000  /* DMA3 Pattern Matching Enabled */
+#define                  DMAPMEN4  0x10000000 /* DMA4 Pattern Matching Enabled */
+#define                  DMAPMEN5  0x20000000 /* DMA5 Pattern Matching Enabled */
+#define                  DMAPMEN6  0x40000000 /* DMA6 Pattern Matching Enabled */
+#define                  DMAPMEN7  0x80000000 /* DMA7 Pattern Matching Enabled */
+
+/* Bit masks for MXVR_INT_STAT_0 */
+
+#define                      NI2A  0x1        /* Network Inactive to Active */
+#define                      NA2I  0x2        /* Network Active to Inactive */
+#define                     SBU2L  0x4        /* Super Block Unlock to Lock */
+#define                     SBL2U  0x8        /* Super Block Lock to Unlock */
+#define                       PRU  0x10       /* Position Register Updated */
+#define                      MPRU  0x20       /* Maximum Position Register Updated */
+#define                       DRU  0x40       /* Delay Register Updated */
+#define                      MDRU  0x80       /* Maximum Delay Register Updated */
+#define                       SBU  0x100      /* Synchronous Boundary Updated */
+#define                       ATU  0x200      /* Allocation Table Updated */
+#define                      FCZ0  0x400      /* Frame Counter 0 Zero */
+#define                      FCZ1  0x800      /* Frame Counter 1 Zero */
+#define                      PERR  0x1000     /* Parity Error */
+#define                      MH2L  0x2000     /* MRXONB High to Low */
+#define                      ML2H  0x4000     /* MRXONB Low to High */
+#define                       WUP  0x8000     /* Wake-Up Preamble Received */
+#define                      FU2L  0x10000    /* Frame Unlock to Lock */
+#define                      FL2U  0x20000    /* Frame Lock to Unlock */
+#define                      BU2L  0x40000    /* Block Unlock to Lock */
+#define                      BL2U  0x80000    /* Block Lock to Unlock */
+#define                     OBERR  0x100000   /* DMA Out of Bounds Error */
+#define                       PFL  0x200000   /* PLL Frequency Locked */
+#define                       SCZ  0x400000   /* System Clock Counter Zero */
+#define                      FERR  0x800000   /* FIFO Error */
+#define                       CMR  0x1000000  /* Control Message Received */
+#define                     CMROF  0x2000000  /* Control Message Receive Buffer Overflow */
+#define                      CMTS  0x4000000  /* Control Message Transmit Buffer Successfully Sent */
+#define                      CMTC  0x8000000  /* Control Message Transmit Buffer Successfully Cancelled */
+#define                      RWRC  0x10000000 /* Remote Write Control Message Completed */
+#define                       BCZ  0x20000000 /* Block Counter Zero */
+#define                     BMERR  0x40000000 /* Biphase Mark Coding Error */
+#define                      DERR  0x80000000 /* DMA Error */
+
+/* Bit masks for MXVR_INT_STAT_1 */
+
+#define                    HDONE0  0x1        /* DMA0 Half Done */
+#define                     DONE0  0x2        /* DMA0 Done */
+#define                       APR  0x4        /* Asynchronous Packet Received */
+#define                     APROF  0x8        /* Asynchronous Packet Receive Buffer Overflow */
+#define                    HDONE1  0x10       /* DMA1 Half Done */
+#define                     DONE1  0x20       /* DMA1 Done */
+#define                      APTS  0x40       /* Asynchronous Packet Transmit Buffer Successfully Sent */
+#define                      APTC  0x80       /* Asynchronous Packet Transmit Buffer Successfully Cancelled */
+#define                    HDONE2  0x100      /* DMA2 Half Done */
+#define                     DONE2  0x200      /* DMA2 Done */
+#define                     APRCE  0x400      /* Asynchronous Packet Receive CRC Error */
+#define                     APRPE  0x800      /* Asynchronous Packet Receive Packet Error */
+#define                    HDONE3  0x1000     /* DMA3 Half Done */
+#define                     DONE3  0x2000     /* DMA3 Done */
+#define                    HDONE4  0x10000    /* DMA4 Half Done */
+#define                     DONE4  0x20000    /* DMA4 Done */
+#define                    HDONE5  0x100000   /* DMA5 Half Done */
+#define                     DONE5  0x200000   /* DMA5 Done */
+#define                    HDONE6  0x1000000  /* DMA6 Half Done */
+#define                     DONE6  0x2000000  /* DMA6 Done */
+#define                    HDONE7  0x10000000 /* DMA7 Half Done */
+#define                     DONE7  0x20000000 /* DMA7 Done */
+
+/* Bit masks for MXVR_INT_EN_0 */
+
+#define                    NI2AEN  0x1        /* Network Inactive to Active Interrupt Enable */
+#define                    NA2IEN  0x2        /* Network Active to Inactive Interrupt Enable */
+#define                   SBU2LEN  0x4        /* Super Block Unlock to Lock Interrupt Enable */
+#define                   SBL2UEN  0x8        /* Super Block Lock to Unlock Interrupt Enable */
+#define                     PRUEN  0x10       /* Position Register Updated Interrupt Enable */
+#define                    MPRUEN  0x20       /* Maximum Position Register Updated Interrupt Enable */
+#define                     DRUEN  0x40       /* Delay Register Updated Interrupt Enable */
+#define                    MDRUEN  0x80       /* Maximum Delay Register Updated Interrupt Enable */
+#define                     SBUEN  0x100      /* Synchronous Boundary Updated Interrupt Enable */
+#define                     ATUEN  0x200      /* Allocation Table Updated Interrupt Enable */
+#define                    FCZ0EN  0x400      /* Frame Counter 0 Zero Interrupt Enable */
+#define                    FCZ1EN  0x800      /* Frame Counter 1 Zero Interrupt Enable */
+#define                    PERREN  0x1000     /* Parity Error Interrupt Enable */
+#define                    MH2LEN  0x2000     /* MRXONB High to Low Interrupt Enable */
+#define                    ML2HEN  0x4000     /* MRXONB Low to High Interrupt Enable */
+#define                     WUPEN  0x8000     /* Wake-Up Preamble Received Interrupt Enable */
+#define                    FU2LEN  0x10000    /* Frame Unlock to Lock Interrupt Enable */
+#define                    FL2UEN  0x20000    /* Frame Lock to Unlock Interrupt Enable */
+#define                    BU2LEN  0x40000    /* Block Unlock to Lock Interrupt Enable */
+#define                    BL2UEN  0x80000    /* Block Lock to Unlock Interrupt Enable */
+#define                   OBERREN  0x100000   /* DMA Out of Bounds Error Interrupt Enable */
+#define                     PFLEN  0x200000   /* PLL Frequency Locked Interrupt Enable */
+#define                     SCZEN  0x400000   /* System Clock Counter Zero Interrupt Enable */
+#define                    FERREN  0x800000   /* FIFO Error Interrupt Enable */
+#define                     CMREN  0x1000000  /* Control Message Received Interrupt Enable */
+#define                   CMROFEN  0x2000000  /* Control Message Receive Buffer Overflow Interrupt Enable */
+#define                    CMTSEN  0x4000000  /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */
+#define                    CMTCEN  0x8000000  /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */
+#define                    RWRCEN  0x10000000 /* Remote Write Control Message Completed Interrupt Enable */
+#define                     BCZEN  0x20000000 /* Block Counter Zero Interrupt Enable */
+#define                   BMERREN  0x40000000 /* Biphase Mark Coding Error Interrupt Enable */
+#define                    DERREN  0x80000000 /* DMA Error Interrupt Enable */
+
+/* Bit masks for MXVR_INT_EN_1 */
+
+#define                  HDONEEN0  0x1        /* DMA0 Half Done Interrupt Enable */
+#define                   DONEEN0  0x2        /* DMA0 Done Interrupt Enable */
+#define                     APREN  0x4        /* Asynchronous Packet Received Interrupt Enable */
+#define                   APROFEN  0x8        /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */
+#define                  HDONEEN1  0x10       /* DMA1 Half Done Interrupt Enable */
+#define                   DONEEN1  0x20       /* DMA1 Done Interrupt Enable */
+#define                    APTSEN  0x40       /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */
+#define                    APTCEN  0x80       /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */
+#define                  HDONEEN2  0x100      /* DMA2 Half Done Interrupt Enable */
+#define                   DONEEN2  0x200      /* DMA2 Done Interrupt Enable */
+#define                   APRCEEN  0x400      /* Asynchronous Packet Receive CRC Error Interrupt Enable */
+#define                   APRPEEN  0x800      /* Asynchronous Packet Receive Packet Error Interrupt Enable */
+#define                  HDONEEN3  0x1000     /* DMA3 Half Done Interrupt Enable */
+#define                   DONEEN3  0x2000     /* DMA3 Done Interrupt Enable */
+#define                  HDONEEN4  0x10000    /* DMA4 Half Done Interrupt Enable */
+#define                   DONEEN4  0x20000    /* DMA4 Done Interrupt Enable */
+#define                  HDONEEN5  0x100000   /* DMA5 Half Done Interrupt Enable */
+#define                   DONEEN5  0x200000   /* DMA5 Done Interrupt Enable */
+#define                  HDONEEN6  0x1000000  /* DMA6 Half Done Interrupt Enable */
+#define                   DONEEN6  0x2000000  /* DMA6 Done Interrupt Enable */
+#define                  HDONEEN7  0x10000000 /* DMA7 Half Done Interrupt Enable */
+#define                   DONEEN7  0x20000000 /* DMA7 Done Interrupt Enable */
+
+/* Bit masks for MXVR_POSITION */
+
+#define                  POSITION  0x3f       /* Node Position */
+#define                    PVALID  0x8000     /* Node Position Valid */
+
+/* Bit masks for MXVR_MAX_POSITION */
+
+#define                 MPOSITION  0x3f       /* Maximum Node Position */
+#define                   MPVALID  0x8000     /* Maximum Node Position Valid */
+
+/* Bit masks for MXVR_DELAY */
+
+#define                     DELAY  0x3f       /* Node Frame Delay */
+#define                    DVALID  0x8000     /* Node Frame Delay Valid */
+
+/* Bit masks for MXVR_MAX_DELAY */
+
+#define                    MDELAY  0x3f       /* Maximum Node Frame Delay */
+#define                   MDVALID  0x8000     /* Maximum Node Frame Delay Valid */
+
+/* Bit masks for MXVR_LADDR */
+
+#define                     LADDR  0xffff     /* Logical Address */
+#define                    LVALID  0x80000000 /* Logical Address Valid */
+
+/* Bit masks for MXVR_GADDR */
+
+#define                    GADDRL  0xff       /* Group Address Lower Byte */
+#define                    GVALID  0x8000     /* Group Address Valid */
+
+/* Bit masks for MXVR_AADDR */
+
+#define                     AADDR  0xffff     /* Alternate Address */
+#define                    AVALID  0x80000000 /* Alternate Address Valid */
+
+/* Bit masks for MXVR_ALLOC_0 */
+
+#define                       CL0  0x7f       /* Channel 0 Connection Label */
+#define                      CIU0  0x80       /* Channel 0 In Use */
+#define                       CL1  0x7f00     /* Channel 0 Connection Label */
+#define                      CIU1  0x8000     /* Channel 0 In Use */
+#define                       CL2  0x7f0000   /* Channel 0 Connection Label */
+#define                      CIU2  0x800000   /* Channel 0 In Use */
+#define                       CL3  0x7f000000 /* Channel 0 Connection Label */
+#define                      CIU3  0x80000000 /* Channel 0 In Use */
+
+/* Bit masks for MXVR_ALLOC_1 */
+
+#define                       CL4  0x7f       /* Channel 4 Connection Label */
+#define                      CIU4  0x80       /* Channel 4 In Use */
+#define                       CL5  0x7f00     /* Channel 5 Connection Label */
+#define                      CIU5  0x8000     /* Channel 5 In Use */
+#define                       CL6  0x7f0000   /* Channel 6 Connection Label */
+#define                      CIU6  0x800000   /* Channel 6 In Use */
+#define                       CL7  0x7f000000 /* Channel 7 Connection Label */
+#define                      CIU7  0x80000000 /* Channel 7 In Use */
+
+/* Bit masks for MXVR_ALLOC_2 */
+
+#define                       CL8  0x7f       /* Channel 8 Connection Label */
+#define                      CIU8  0x80       /* Channel 8 In Use */
+#define                       CL9  0x7f00     /* Channel 9 Connection Label */
+#define                      CIU9  0x8000     /* Channel 9 In Use */
+#define                      CL10  0x7f0000   /* Channel 10 Connection Label */
+#define                     CIU10  0x800000   /* Channel 10 In Use */
+#define                      CL11  0x7f000000 /* Channel 11 Connection Label */
+#define                     CIU11  0x80000000 /* Channel 11 In Use */
+
+/* Bit masks for MXVR_ALLOC_3 */
+
+#define                      CL12  0x7f       /* Channel 12 Connection Label */
+#define                     CIU12  0x80       /* Channel 12 In Use */
+#define                      CL13  0x7f00     /* Channel 13 Connection Label */
+#define                     CIU13  0x8000     /* Channel 13 In Use */
+#define                      CL14  0x7f0000   /* Channel 14 Connection Label */
+#define                     CIU14  0x800000   /* Channel 14 In Use */
+#define                      CL15  0x7f000000 /* Channel 15 Connection Label */
+#define                     CIU15  0x80000000 /* Channel 15 In Use */
+
+/* Bit masks for MXVR_ALLOC_4 */
+
+#define                      CL16  0x7f       /* Channel 16 Connection Label */
+#define                     CIU16  0x80       /* Channel 16 In Use */
+#define                      CL17  0x7f00     /* Channel 17 Connection Label */
+#define                     CIU17  0x8000     /* Channel 17 In Use */
+#define                      CL18  0x7f0000   /* Channel 18 Connection Label */
+#define                     CIU18  0x800000   /* Channel 18 In Use */
+#define                      CL19  0x7f000000 /* Channel 19 Connection Label */
+#define                     CIU19  0x80000000 /* Channel 19 In Use */
+
+/* Bit masks for MXVR_ALLOC_5 */
+
+#define                      CL20  0x7f       /* Channel 20 Connection Label */
+#define                     CIU20  0x80       /* Channel 20 In Use */
+#define                      CL21  0x7f00     /* Channel 21 Connection Label */
+#define                     CIU21  0x8000     /* Channel 21 In Use */
+#define                      CL22  0x7f0000   /* Channel 22 Connection Label */
+#define                     CIU22  0x800000   /* Channel 22 In Use */
+#define                      CL23  0x7f000000 /* Channel 23 Connection Label */
+#define                     CIU23  0x80000000 /* Channel 23 In Use */
+
+/* Bit masks for MXVR_ALLOC_6 */
+
+#define                      CL24  0x7f       /* Channel 24 Connection Label */
+#define                     CIU24  0x80       /* Channel 24 In Use */
+#define                      CL25  0x7f00     /* Channel 25 Connection Label */
+#define                     CIU25  0x8000     /* Channel 25 In Use */
+#define                      CL26  0x7f0000   /* Channel 26 Connection Label */
+#define                     CIU26  0x800000   /* Channel 26 In Use */
+#define                      CL27  0x7f000000 /* Channel 27 Connection Label */
+#define                     CIU27  0x80000000 /* Channel 27 In Use */
+
+/* Bit masks for MXVR_ALLOC_7 */
+
+#define                      CL28  0x7f       /* Channel 28 Connection Label */
+#define                     CIU28  0x80       /* Channel 28 In Use */
+#define                      CL29  0x7f00     /* Channel 29 Connection Label */
+#define                     CIU29  0x8000     /* Channel 29 In Use */
+#define                      CL30  0x7f0000   /* Channel 30 Connection Label */
+#define                     CIU30  0x800000   /* Channel 30 In Use */
+#define                      CL31  0x7f000000 /* Channel 31 Connection Label */
+#define                     CIU31  0x80000000 /* Channel 31 In Use */
+
+/* Bit masks for MXVR_ALLOC_8 */
+
+#define                      CL32  0x7f       /* Channel 32 Connection Label */
+#define                     CIU32  0x80       /* Channel 32 In Use */
+#define                      CL33  0x7f00     /* Channel 33 Connection Label */
+#define                     CIU33  0x8000     /* Channel 33 In Use */
+#define                      CL34  0x7f0000   /* Channel 34 Connection Label */
+#define                     CIU34  0x800000   /* Channel 34 In Use */
+#define                      CL35  0x7f000000 /* Channel 35 Connection Label */
+#define                     CIU35  0x80000000 /* Channel 35 In Use */
+
+/* Bit masks for MXVR_ALLOC_9 */
+
+#define                      CL36  0x7f       /* Channel 36 Connection Label */
+#define                     CIU36  0x80       /* Channel 36 In Use */
+#define                      CL37  0x7f00     /* Channel 37 Connection Label */
+#define                     CIU37  0x8000     /* Channel 37 In Use */
+#define                      CL38  0x7f0000   /* Channel 38 Connection Label */
+#define                     CIU38  0x800000   /* Channel 38 In Use */
+#define                      CL39  0x7f000000 /* Channel 39 Connection Label */
+#define                     CIU39  0x80000000 /* Channel 39 In Use */
+
+/* Bit masks for MXVR_ALLOC_10 */
+
+#define                      CL40  0x7f       /* Channel 40 Connection Label */
+#define                     CIU40  0x80       /* Channel 40 In Use */
+#define                      CL41  0x7f00     /* Channel 41 Connection Label */
+#define                     CIU41  0x8000     /* Channel 41 In Use */
+#define                      CL42  0x7f0000   /* Channel 42 Connection Label */
+#define                     CIU42  0x800000   /* Channel 42 In Use */
+#define                      CL43  0x7f000000 /* Channel 43 Connection Label */
+#define                     CIU43  0x80000000 /* Channel 43 In Use */
+
+/* Bit masks for MXVR_ALLOC_11 */
+
+#define                      CL44  0x7f       /* Channel 44 Connection Label */
+#define                     CIU44  0x80       /* Channel 44 In Use */
+#define                      CL45  0x7f00     /* Channel 45 Connection Label */
+#define                     CIU45  0x8000     /* Channel 45 In Use */
+#define                      CL46  0x7f0000   /* Channel 46 Connection Label */
+#define                     CIU46  0x800000   /* Channel 46 In Use */
+#define                      CL47  0x7f000000 /* Channel 47 Connection Label */
+#define                     CIU47  0x80000000 /* Channel 47 In Use */
+
+/* Bit masks for MXVR_ALLOC_12 */
+
+#define                      CL48  0x7f       /* Channel 48 Connection Label */
+#define                     CIU48  0x80       /* Channel 48 In Use */
+#define                      CL49  0x7f00     /* Channel 49 Connection Label */
+#define                     CIU49  0x8000     /* Channel 49 In Use */
+#define                      CL50  0x7f0000   /* Channel 50 Connection Label */
+#define                     CIU50  0x800000   /* Channel 50 In Use */
+#define                      CL51  0x7f000000 /* Channel 51 Connection Label */
+#define                     CIU51  0x80000000 /* Channel 51 In Use */
+
+/* Bit masks for MXVR_ALLOC_13 */
+
+#define                      CL52  0x7f       /* Channel 52 Connection Label */
+#define                     CIU52  0x80       /* Channel 52 In Use */
+#define                      CL53  0x7f00     /* Channel 53 Connection Label */
+#define                     CIU53  0x8000     /* Channel 53 In Use */
+#define                      CL54  0x7f0000   /* Channel 54 Connection Label */
+#define                     CIU54  0x800000   /* Channel 54 In Use */
+#define                      CL55  0x7f000000 /* Channel 55 Connection Label */
+#define                     CIU55  0x80000000 /* Channel 55 In Use */
+
+/* Bit masks for MXVR_ALLOC_14 */
+
+#define                      CL56  0x7f       /* Channel 56 Connection Label */
+#define                     CIU56  0x80       /* Channel 56 In Use */
+#define                      CL57  0x7f00     /* Channel 57 Connection Label */
+#define                     CIU57  0x8000     /* Channel 57 In Use */
+#define                      CL58  0x7f0000   /* Channel 58 Connection Label */
+#define                     CIU58  0x800000   /* Channel 58 In Use */
+#define                      CL59  0x7f000000 /* Channel 59 Connection Label */
+#define                     CIU59  0x80000000 /* Channel 59 In Use */
+
+/* MXVR_SYNC_LCHAN_0 Masks */
+
+#define LCHANPC0     0x0000000Flu
+#define LCHANPC1     0x000000F0lu
+#define LCHANPC2     0x00000F00lu
+#define LCHANPC3     0x0000F000lu
+#define LCHANPC4     0x000F0000lu
+#define LCHANPC5     0x00F00000lu
+#define LCHANPC6     0x0F000000lu
+#define LCHANPC7     0xF0000000lu
+
+
+/* MXVR_SYNC_LCHAN_1 Masks */
+
+#define LCHANPC8     0x0000000Flu
+#define LCHANPC9     0x000000F0lu
+#define LCHANPC10    0x00000F00lu
+#define LCHANPC11    0x0000F000lu
+#define LCHANPC12    0x000F0000lu
+#define LCHANPC13    0x00F00000lu
+#define LCHANPC14    0x0F000000lu
+#define LCHANPC15    0xF0000000lu
+
+
+/* MXVR_SYNC_LCHAN_2 Masks */
+
+#define LCHANPC16    0x0000000Flu
+#define LCHANPC17    0x000000F0lu
+#define LCHANPC18    0x00000F00lu
+#define LCHANPC19    0x0000F000lu
+#define LCHANPC20    0x000F0000lu
+#define LCHANPC21    0x00F00000lu
+#define LCHANPC22    0x0F000000lu
+#define LCHANPC23    0xF0000000lu
+
+
+/* MXVR_SYNC_LCHAN_3 Masks */
+
+#define LCHANPC24    0x0000000Flu
+#define LCHANPC25    0x000000F0lu
+#define LCHANPC26    0x00000F00lu
+#define LCHANPC27    0x0000F000lu
+#define LCHANPC28    0x000F0000lu
+#define LCHANPC29    0x00F00000lu
+#define LCHANPC30    0x0F000000lu
+#define LCHANPC31    0xF0000000lu
+
+
+/* MXVR_SYNC_LCHAN_4 Masks */
+
+#define LCHANPC32    0x0000000Flu
+#define LCHANPC33    0x000000F0lu
+#define LCHANPC34    0x00000F00lu
+#define LCHANPC35    0x0000F000lu
+#define LCHANPC36    0x000F0000lu
+#define LCHANPC37    0x00F00000lu
+#define LCHANPC38    0x0F000000lu
+#define LCHANPC39    0xF0000000lu
+
+
+/* MXVR_SYNC_LCHAN_5 Masks */
+
+#define LCHANPC40    0x0000000Flu
+#define LCHANPC41    0x000000F0lu
+#define LCHANPC42    0x00000F00lu
+#define LCHANPC43    0x0000F000lu
+#define LCHANPC44    0x000F0000lu
+#define LCHANPC45    0x00F00000lu
+#define LCHANPC46    0x0F000000lu
+#define LCHANPC47    0xF0000000lu
+
+
+/* MXVR_SYNC_LCHAN_6 Masks */
+
+#define LCHANPC48    0x0000000Flu
+#define LCHANPC49    0x000000F0lu
+#define LCHANPC50    0x00000F00lu
+#define LCHANPC51    0x0000F000lu
+#define LCHANPC52    0x000F0000lu
+#define LCHANPC53    0x00F00000lu
+#define LCHANPC54    0x0F000000lu
+#define LCHANPC55    0xF0000000lu
+
+
+/* MXVR_SYNC_LCHAN_7 Masks */
+
+#define LCHANPC56    0x0000000Flu
+#define LCHANPC57    0x000000F0lu
+#define LCHANPC58    0x00000F00lu
+#define LCHANPC59    0x0000F000lu
+
+/* Bit masks for MXVR_DMAx_CONFIG */
+
+#define                    MDMAEN  0x1        /* DMA Channel Enable */
+#define                     DMADD  0x2        /* DMA Channel Direction */
+#define                 BY4SWAPEN  0x20       /* DMA Channel Four Byte Swap Enable */
+#define                     LCHAN  0x3c0      /* DMA Channel Logical Channel */
+#define                 BITSWAPEN  0x400      /* DMA Channel Bit Swap Enable */
+#define                 BY2SWAPEN  0x800      /* DMA Channel Two Byte Swap Enable */
+#define                     MFLOW  0x7000     /* DMA Channel Operation Flow */
+#define                   FIXEDPM  0x80000    /* DMA Channel Fixed Pattern Matching Select */
+#define                  STARTPAT  0x300000   /* DMA Channel Start Pattern Select */
+#define                   STOPPAT  0xc00000   /* DMA Channel Stop Pattern Select */
+#define                  COUNTPOS  0x1c000000 /* DMA Channel Count Position */
+
+/* Bit masks for MXVR_AP_CTL */
+
+#define                   STARTAP  0x1        /* Start Asynchronous Packet Transmission */
+#define                  CANCELAP  0x2        /* Cancel Asynchronous Packet Transmission */
+#define                   RESETAP  0x4        /* Reset Asynchronous Packet Arbitration */
+#define                    APRBE0  0x4000     /* Asynchronous Packet Receive Buffer Entry 0 */
+#define                    APRBE1  0x8000     /* Asynchronous Packet Receive Buffer Entry 1 */
+
+/* Bit masks for MXVR_APRB_START_ADDR */
+
+#define      MXVR_APRB_START_ADDR_MASK  0x1fffffe  /* Asynchronous Packet Receive Buffer Start Address */
+
+/* Bit masks for MXVR_APRB_CURR_ADDR */
+
+#define       MXVR_APRB_CURR_ADDR_MASK  0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
+
+/* Bit masks for MXVR_APTB_START_ADDR */
+
+#define       MXVR_APTB_START_ADDR_MASK  0x1fffffe  /* Asynchronous Packet Transmit Buffer Start Address */
+
+/* Bit masks for MXVR_APTB_CURR_ADDR */
+
+#define        MXVR_APTB_CURR_ADDR_MASK  0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
+
+/* Bit masks for MXVR_CM_CTL */
+
+#define                   STARTCM  0x1        /* Start Control Message Transmission */
+#define                  CANCELCM  0x2        /* Cancel Control Message Transmission */
+#define                    CMRBE0  0x10000    /* Control Message Receive Buffer Entry 0 */
+#define                    CMRBE1  0x20000    /* Control Message Receive Buffer Entry 1 */
+#define                    CMRBE2  0x40000    /* Control Message Receive Buffer Entry 2 */
+#define                    CMRBE3  0x80000    /* Control Message Receive Buffer Entry 3 */
+#define                    CMRBE4  0x100000   /* Control Message Receive Buffer Entry 4 */
+#define                    CMRBE5  0x200000   /* Control Message Receive Buffer Entry 5 */
+#define                    CMRBE6  0x400000   /* Control Message Receive Buffer Entry 6 */
+#define                    CMRBE7  0x800000   /* Control Message Receive Buffer Entry 7 */
+#define                    CMRBE8  0x1000000  /* Control Message Receive Buffer Entry 8 */
+#define                    CMRBE9  0x2000000  /* Control Message Receive Buffer Entry 9 */
+#define                   CMRBE10  0x4000000  /* Control Message Receive Buffer Entry 10 */
+#define                   CMRBE11  0x8000000  /* Control Message Receive Buffer Entry 11 */
+#define                   CMRBE12  0x10000000 /* Control Message Receive Buffer Entry 12 */
+#define                   CMRBE13  0x20000000 /* Control Message Receive Buffer Entry 13 */
+#define                   CMRBE14  0x40000000 /* Control Message Receive Buffer Entry 14 */
+#define                   CMRBE15  0x80000000 /* Control Message Receive Buffer Entry 15 */
+
+/* Bit masks for MXVR_CMRB_START_ADDR */
+
+#define      MXVR_CMRB_START_ADDR_MASK  0x1fffffe  /* Control Message Receive Buffer Start Address */
+
+/* Bit masks for MXVR_CMRB_CURR_ADDR */
+
+#define       MXVR_CMRB_CURR_ADDR_MASK  0xffffffff /* Control Message Receive Buffer Current Address */
+
+/* Bit masks for MXVR_CMTB_START_ADDR */
+
+#define      MXVR_CMTB_START_ADDR_MASK  0x1fffffe  /* Control Message Transmit Buffer Start Address */
+
+/* Bit masks for MXVR_CMTB_CURR_ADDR */
+
+#define       MXVR_CMTB_CURR_ADDR_MASK  0xffffffff /* Control Message Transmit Buffer Current Address */
+
+/* Bit masks for MXVR_RRDB_START_ADDR */
+
+#define      MXVR_RRDB_START_ADDR_MASK  0x1fffffe  /* Remote Read Buffer Start Address */
+
+/* Bit masks for MXVR_RRDB_CURR_ADDR */
+
+#define       MXVR_RRDB_CURR_ADDR_MASK  0xffffffff /* Remote Read Buffer Current Address */
+
+/* Bit masks for MXVR_PAT_DATAx */
+
+#define              MATCH_DATA_0  0xff       /* Pattern Match Data Byte 0 */
+#define              MATCH_DATA_1  0xff00     /* Pattern Match Data Byte 1 */
+#define              MATCH_DATA_2  0xff0000   /* Pattern Match Data Byte 2 */
+#define              MATCH_DATA_3  0xff000000 /* Pattern Match Data Byte 3 */
+
+/* Bit masks for MXVR_PAT_EN_0 */
+
+#define              MATCH_EN_0_0  0x1        /* Pattern Match Enable Byte 0 Bit 0 */
+#define              MATCH_EN_0_1  0x2        /* Pattern Match Enable Byte 0 Bit 1 */
+#define              MATCH_EN_0_2  0x4        /* Pattern Match Enable Byte 0 Bit 2 */
+#define              MATCH_EN_0_3  0x8        /* Pattern Match Enable Byte 0 Bit 3 */
+#define              MATCH_EN_0_4  0x10       /* Pattern Match Enable Byte 0 Bit 4 */
+#define              MATCH_EN_0_5  0x20       /* Pattern Match Enable Byte 0 Bit 5 */
+#define              MATCH_EN_0_6  0x40       /* Pattern Match Enable Byte 0 Bit 6 */
+#define              MATCH_EN_0_7  0x80       /* Pattern Match Enable Byte 0 Bit 7 */
+#define              MATCH_EN_1_0  0x100      /* Pattern Match Enable Byte 1 Bit 0 */
+#define              MATCH_EN_1_1  0x200      /* Pattern Match Enable Byte 1 Bit 1 */
+#define              MATCH_EN_1_2  0x400      /* Pattern Match Enable Byte 1 Bit 2 */
+#define              MATCH_EN_1_3  0x800      /* Pattern Match Enable Byte 1 Bit 3 */
+#define              MATCH_EN_1_4  0x1000     /* Pattern Match Enable Byte 1 Bit 4 */
+#define              MATCH_EN_1_5  0x2000     /* Pattern Match Enable Byte 1 Bit 5 */
+#define              MATCH_EN_1_6  0x4000     /* Pattern Match Enable Byte 1 Bit 6 */
+#define              MATCH_EN_1_7  0x8000     /* Pattern Match Enable Byte 1 Bit 7 */
+#define              MATCH_EN_2_0  0x10000    /* Pattern Match Enable Byte 2 Bit 0 */
+#define              MATCH_EN_2_1  0x20000    /* Pattern Match Enable Byte 2 Bit 1 */
+#define              MATCH_EN_2_2  0x40000    /* Pattern Match Enable Byte 2 Bit 2 */
+#define              MATCH_EN_2_3  0x80000    /* Pattern Match Enable Byte 2 Bit 3 */
+#define              MATCH_EN_2_4  0x100000   /* Pattern Match Enable Byte 2 Bit 4 */
+#define              MATCH_EN_2_5  0x200000   /* Pattern Match Enable Byte 2 Bit 5 */
+#define              MATCH_EN_2_6  0x400000   /* Pattern Match Enable Byte 2 Bit 6 */
+#define              MATCH_EN_2_7  0x800000   /* Pattern Match Enable Byte 2 Bit 7 */
+#define              MATCH_EN_3_0  0x1000000  /* Pattern Match Enable Byte 3 Bit 0 */
+#define              MATCH_EN_3_1  0x2000000  /* Pattern Match Enable Byte 3 Bit 1 */
+#define              MATCH_EN_3_2  0x4000000  /* Pattern Match Enable Byte 3 Bit 2 */
+#define              MATCH_EN_3_3  0x8000000  /* Pattern Match Enable Byte 3 Bit 3 */
+#define              MATCH_EN_3_4  0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
+#define              MATCH_EN_3_5  0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
+#define              MATCH_EN_3_6  0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
+#define              MATCH_EN_3_7  0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
+
+/* Bit masks for MXVR_PAT_EN_1 */
+
+#define              MATCH_EN_0_0  0x1        /* Pattern Match Enable Byte 0 Bit 0 */
+#define              MATCH_EN_0_1  0x2        /* Pattern Match Enable Byte 0 Bit 1 */
+#define              MATCH_EN_0_2  0x4        /* Pattern Match Enable Byte 0 Bit 2 */
+#define              MATCH_EN_0_3  0x8        /* Pattern Match Enable Byte 0 Bit 3 */
+#define              MATCH_EN_0_4  0x10       /* Pattern Match Enable Byte 0 Bit 4 */
+#define              MATCH_EN_0_5  0x20       /* Pattern Match Enable Byte 0 Bit 5 */
+#define              MATCH_EN_0_6  0x40       /* Pattern Match Enable Byte 0 Bit 6 */
+#define              MATCH_EN_0_7  0x80       /* Pattern Match Enable Byte 0 Bit 7 */
+#define              MATCH_EN_1_0  0x100      /* Pattern Match Enable Byte 1 Bit 0 */
+#define              MATCH_EN_1_1  0x200      /* Pattern Match Enable Byte 1 Bit 1 */
+#define              MATCH_EN_1_2  0x400      /* Pattern Match Enable Byte 1 Bit 2 */
+#define              MATCH_EN_1_3  0x800      /* Pattern Match Enable Byte 1 Bit 3 */
+#define              MATCH_EN_1_4  0x1000     /* Pattern Match Enable Byte 1 Bit 4 */
+#define              MATCH_EN_1_5  0x2000     /* Pattern Match Enable Byte 1 Bit 5 */
+#define              MATCH_EN_1_6  0x4000     /* Pattern Match Enable Byte 1 Bit 6 */
+#define              MATCH_EN_1_7  0x8000     /* Pattern Match Enable Byte 1 Bit 7 */
+#define              MATCH_EN_2_0  0x10000    /* Pattern Match Enable Byte 2 Bit 0 */
+#define              MATCH_EN_2_1  0x20000    /* Pattern Match Enable Byte 2 Bit 1 */
+#define              MATCH_EN_2_2  0x40000    /* Pattern Match Enable Byte 2 Bit 2 */
+#define              MATCH_EN_2_3  0x80000    /* Pattern Match Enable Byte 2 Bit 3 */
+#define              MATCH_EN_2_4  0x100000   /* Pattern Match Enable Byte 2 Bit 4 */
+#define              MATCH_EN_2_5  0x200000   /* Pattern Match Enable Byte 2 Bit 5 */
+#define              MATCH_EN_2_6  0x400000   /* Pattern Match Enable Byte 2 Bit 6 */
+#define              MATCH_EN_2_7  0x800000   /* Pattern Match Enable Byte 2 Bit 7 */
+#define              MATCH_EN_3_0  0x1000000  /* Pattern Match Enable Byte 3 Bit 0 */
+#define              MATCH_EN_3_1  0x2000000  /* Pattern Match Enable Byte 3 Bit 1 */
+#define              MATCH_EN_3_2  0x4000000  /* Pattern Match Enable Byte 3 Bit 2 */
+#define              MATCH_EN_3_3  0x8000000  /* Pattern Match Enable Byte 3 Bit 3 */
+#define              MATCH_EN_3_4  0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
+#define              MATCH_EN_3_5  0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
+#define              MATCH_EN_3_6  0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
+#define              MATCH_EN_3_7  0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
+
+/* Bit masks for MXVR_FRAME_CNT_0 */
+
+#define                      FCNT  0xffff     /* Frame Count */
+
+/* Bit masks for MXVR_FRAME_CNT_1 */
+
+#define                      FCNT  0xffff     /* Frame Count */
+
+/* Bit masks for MXVR_ROUTING_0 */
+
+#define                    TX_CH0  0x3f       /* Transmit Channel 0 */
+#define                  MUTE_CH0  0x80       /* Mute Channel 0 */
+#define                    TX_CH1  0x3f00     /* Transmit Channel 0 */
+#define                  MUTE_CH1  0x8000     /* Mute Channel 0 */
+#define                    TX_CH2  0x3f0000   /* Transmit Channel 0 */
+#define                  MUTE_CH2  0x800000   /* Mute Channel 0 */
+#define                    TX_CH3  0x3f000000 /* Transmit Channel 0 */
+#define                  MUTE_CH3  0x80000000 /* Mute Channel 0 */
+
+/* Bit masks for MXVR_ROUTING_1 */
+
+#define                    TX_CH4  0x3f       /* Transmit Channel 4 */
+#define                  MUTE_CH4  0x80       /* Mute Channel 4 */
+#define                    TX_CH5  0x3f00     /* Transmit Channel 5 */
+#define                  MUTE_CH5  0x8000     /* Mute Channel 5 */
+#define                    TX_CH6  0x3f0000   /* Transmit Channel 6 */
+#define                  MUTE_CH6  0x800000   /* Mute Channel 6 */
+#define                    TX_CH7  0x3f000000 /* Transmit Channel 7 */
+#define                  MUTE_CH7  0x80000000 /* Mute Channel 7 */
+
+/* Bit masks for MXVR_ROUTING_2 */
+
+#define                    TX_CH8  0x3f       /* Transmit Channel 8 */
+#define                  MUTE_CH8  0x80       /* Mute Channel 8 */
+#define                    TX_CH9  0x3f00     /* Transmit Channel 9 */
+#define                  MUTE_CH9  0x8000     /* Mute Channel 9 */
+#define                   TX_CH10  0x3f0000   /* Transmit Channel 10 */
+#define                 MUTE_CH10  0x800000   /* Mute Channel 10 */
+#define                   TX_CH11  0x3f000000 /* Transmit Channel 11 */
+#define                 MUTE_CH11  0x80000000 /* Mute Channel 11 */
+
+/* Bit masks for MXVR_ROUTING_3 */
+
+#define                   TX_CH12  0x3f       /* Transmit Channel 12 */
+#define                 MUTE_CH12  0x80       /* Mute Channel 12 */
+#define                   TX_CH13  0x3f00     /* Transmit Channel 13 */
+#define                 MUTE_CH13  0x8000     /* Mute Channel 13 */
+#define                   TX_CH14  0x3f0000   /* Transmit Channel 14 */
+#define                 MUTE_CH14  0x800000   /* Mute Channel 14 */
+#define                   TX_CH15  0x3f000000 /* Transmit Channel 15 */
+#define                 MUTE_CH15  0x80000000 /* Mute Channel 15 */
+
+/* Bit masks for MXVR_ROUTING_4 */
+
+#define                   TX_CH16  0x3f       /* Transmit Channel 16 */
+#define                 MUTE_CH16  0x80       /* Mute Channel 16 */
+#define                   TX_CH17  0x3f00     /* Transmit Channel 17 */
+#define                 MUTE_CH17  0x8000     /* Mute Channel 17 */
+#define                   TX_CH18  0x3f0000   /* Transmit Channel 18 */
+#define                 MUTE_CH18  0x800000   /* Mute Channel 18 */
+#define                   TX_CH19  0x3f000000 /* Transmit Channel 19 */
+#define                 MUTE_CH19  0x80000000 /* Mute Channel 19 */
+
+/* Bit masks for MXVR_ROUTING_5 */
+
+#define                   TX_CH20  0x3f       /* Transmit Channel 20 */
+#define                 MUTE_CH20  0x80       /* Mute Channel 20 */
+#define                   TX_CH21  0x3f00     /* Transmit Channel 21 */
+#define                 MUTE_CH21  0x8000     /* Mute Channel 21 */
+#define                   TX_CH22  0x3f0000   /* Transmit Channel 22 */
+#define                 MUTE_CH22  0x800000   /* Mute Channel 22 */
+#define                   TX_CH23  0x3f000000 /* Transmit Channel 23 */
+#define                 MUTE_CH23  0x80000000 /* Mute Channel 23 */
+
+/* Bit masks for MXVR_ROUTING_6 */
+
+#define                   TX_CH24  0x3f       /* Transmit Channel 24 */
+#define                 MUTE_CH24  0x80       /* Mute Channel 24 */
+#define                   TX_CH25  0x3f00     /* Transmit Channel 25 */
+#define                 MUTE_CH25  0x8000     /* Mute Channel 25 */
+#define                   TX_CH26  0x3f0000   /* Transmit Channel 26 */
+#define                 MUTE_CH26  0x800000   /* Mute Channel 26 */
+#define                   TX_CH27  0x3f000000 /* Transmit Channel 27 */
+#define                 MUTE_CH27  0x80000000 /* Mute Channel 27 */
+
+/* Bit masks for MXVR_ROUTING_7 */
+
+#define                   TX_CH28  0x3f       /* Transmit Channel 28 */
+#define                 MUTE_CH28  0x80       /* Mute Channel 28 */
+#define                   TX_CH29  0x3f00     /* Transmit Channel 29 */
+#define                 MUTE_CH29  0x8000     /* Mute Channel 29 */
+#define                   TX_CH30  0x3f0000   /* Transmit Channel 30 */
+#define                 MUTE_CH30  0x800000   /* Mute Channel 30 */
+#define                   TX_CH31  0x3f000000 /* Transmit Channel 31 */
+#define                 MUTE_CH31  0x80000000 /* Mute Channel 31 */
+
+/* Bit masks for MXVR_ROUTING_8 */
+
+#define                   TX_CH32  0x3f       /* Transmit Channel 32 */
+#define                 MUTE_CH32  0x80       /* Mute Channel 32 */
+#define                   TX_CH33  0x3f00     /* Transmit Channel 33 */
+#define                 MUTE_CH33  0x8000     /* Mute Channel 33 */
+#define                   TX_CH34  0x3f0000   /* Transmit Channel 34 */
+#define                 MUTE_CH34  0x800000   /* Mute Channel 34 */
+#define                   TX_CH35  0x3f000000 /* Transmit Channel 35 */
+#define                 MUTE_CH35  0x80000000 /* Mute Channel 35 */
+
+/* Bit masks for MXVR_ROUTING_9 */
+
+#define                   TX_CH36  0x3f       /* Transmit Channel 36 */
+#define                 MUTE_CH36  0x80       /* Mute Channel 36 */
+#define                   TX_CH37  0x3f00     /* Transmit Channel 37 */
+#define                 MUTE_CH37  0x8000     /* Mute Channel 37 */
+#define                   TX_CH38  0x3f0000   /* Transmit Channel 38 */
+#define                 MUTE_CH38  0x800000   /* Mute Channel 38 */
+#define                   TX_CH39  0x3f000000 /* Transmit Channel 39 */
+#define                 MUTE_CH39  0x80000000 /* Mute Channel 39 */
+
+/* Bit masks for MXVR_ROUTING_10 */
+
+#define                   TX_CH40  0x3f       /* Transmit Channel 40 */
+#define                 MUTE_CH40  0x80       /* Mute Channel 40 */
+#define                   TX_CH41  0x3f00     /* Transmit Channel 41 */
+#define                 MUTE_CH41  0x8000     /* Mute Channel 41 */
+#define                   TX_CH42  0x3f0000   /* Transmit Channel 42 */
+#define                 MUTE_CH42  0x800000   /* Mute Channel 42 */
+#define                   TX_CH43  0x3f000000 /* Transmit Channel 43 */
+#define                 MUTE_CH43  0x80000000 /* Mute Channel 43 */
+
+/* Bit masks for MXVR_ROUTING_11 */
+
+#define                   TX_CH44  0x3f       /* Transmit Channel 44 */
+#define                 MUTE_CH44  0x80       /* Mute Channel 44 */
+#define                   TX_CH45  0x3f00     /* Transmit Channel 45 */
+#define                 MUTE_CH45  0x8000     /* Mute Channel 45 */
+#define                   TX_CH46  0x3f0000   /* Transmit Channel 46 */
+#define                 MUTE_CH46  0x800000   /* Mute Channel 46 */
+#define                   TX_CH47  0x3f000000 /* Transmit Channel 47 */
+#define                 MUTE_CH47  0x80000000 /* Mute Channel 47 */
+
+/* Bit masks for MXVR_ROUTING_12 */
+
+#define                   TX_CH48  0x3f       /* Transmit Channel 48 */
+#define                 MUTE_CH48  0x80       /* Mute Channel 48 */
+#define                   TX_CH49  0x3f00     /* Transmit Channel 49 */
+#define                 MUTE_CH49  0x8000     /* Mute Channel 49 */
+#define                   TX_CH50  0x3f0000   /* Transmit Channel 50 */
+#define                 MUTE_CH50  0x800000   /* Mute Channel 50 */
+#define                   TX_CH51  0x3f000000 /* Transmit Channel 51 */
+#define                 MUTE_CH51  0x80000000 /* Mute Channel 51 */
+
+/* Bit masks for MXVR_ROUTING_13 */
+
+#define                   TX_CH52  0x3f       /* Transmit Channel 52 */
+#define                 MUTE_CH52  0x80       /* Mute Channel 52 */
+#define                   TX_CH53  0x3f00     /* Transmit Channel 53 */
+#define                 MUTE_CH53  0x8000     /* Mute Channel 53 */
+#define                   TX_CH54  0x3f0000   /* Transmit Channel 54 */
+#define                 MUTE_CH54  0x800000   /* Mute Channel 54 */
+#define                   TX_CH55  0x3f000000 /* Transmit Channel 55 */
+#define                 MUTE_CH55  0x80000000 /* Mute Channel 55 */
+
+/* Bit masks for MXVR_ROUTING_14 */
+
+#define                   TX_CH56  0x3f       /* Transmit Channel 56 */
+#define                 MUTE_CH56  0x80       /* Mute Channel 56 */
+#define                   TX_CH57  0x3f00     /* Transmit Channel 57 */
+#define                 MUTE_CH57  0x8000     /* Mute Channel 57 */
+#define                   TX_CH58  0x3f0000   /* Transmit Channel 58 */
+#define                 MUTE_CH58  0x800000   /* Mute Channel 58 */
+#define                   TX_CH59  0x3f000000 /* Transmit Channel 59 */
+#define                 MUTE_CH59  0x80000000 /* Mute Channel 59 */
+
+/* Bit masks for MXVR_BLOCK_CNT */
+
+#define                      BCNT  0xffff     /* Block Count */
+
+/* Bit masks for MXVR_CLK_CTL */
+
+#define                  MXTALCEN  0x1        /* MXVR Crystal Oscillator Clock Enable */
+#define                  MXTALFEN  0x2        /* MXVR Crystal Oscillator Feedback Enable */
+#define                  MXTALMUL  0x30       /* MXVR Crystal Multiplier */
+#define                  CLKX3SEL  0x80       /* Clock Generation Source Select */
+#define                   MMCLKEN  0x100      /* Master Clock Enable */
+#define                  MMCLKMUL  0x1e00     /* Master Clock Multiplication Factor */
+#define                   PLLSMPS  0xe000     /* MXVR PLL State Machine Prescaler */
+#define                   MBCLKEN  0x10000    /* Bit Clock Enable */
+#define                  MBCLKDIV  0x1e0000   /* Bit Clock Divide Factor */
+#define                     INVRX  0x800000   /* Invert Receive Data */
+#define                     MFSEN  0x1000000  /* Frame Sync Enable */
+#define                    MFSDIV  0x1e000000 /* Frame Sync Divide Factor */
+#define                    MFSSEL  0x60000000 /* Frame Sync Select */
+#define                   MFSSYNC  0x80000000 /* Frame Sync Synchronization Select */
+
+/* Bit masks for MXVR_CDRPLL_CTL */
+
+#define                   CDRSMEN  0x1        /* MXVR CDRPLL State Machine Enable */
+#define                   CDRRSTB  0x2        /* MXVR CDRPLL Reset */
+#define                   CDRSVCO  0x4        /* MXVR CDRPLL Start VCO */
+#define                   CDRMODE  0x8        /* MXVR CDRPLL CDR Mode Select */
+#define                   CDRSCNT  0x3f0      /* MXVR CDRPLL Start Counter */
+#define                   CDRLCNT  0xfc00     /* MXVR CDRPLL Lock Counter */
+#define                 CDRSHPSEL  0x3f0000   /* MXVR CDRPLL Shaper Select */
+#define                  CDRSHPEN  0x800000   /* MXVR CDRPLL Shaper Enable */
+#define                  CDRCPSEL  0xff000000 /* MXVR CDRPLL Charge Pump Current Select */
+
+/* Bit masks for MXVR_FMPLL_CTL */
+
+#define                    FMSMEN  0x1        /* MXVR FMPLL State Machine Enable */
+#define                    FMRSTB  0x2        /* MXVR FMPLL Reset */
+#define                    FMSVCO  0x4        /* MXVR FMPLL Start VCO */
+#define                    FMSCNT  0x3f0      /* MXVR FMPLL Start Counter */
+#define                    FMLCNT  0xfc00     /* MXVR FMPLL Lock Counter */
+#define                   FMCPSEL  0xff000000 /* MXVR FMPLL Charge Pump Current Select */
+
+/* Bit masks for MXVR_PIN_CTL */
+
+#define                  MTXONBOD  0x1        /* MTXONB Open Drain Select */
+#define                   MTXONBG  0x2        /* MTXONB Gates MTX Select */
+#define                     MFSOE  0x10       /* MFS Output Enable */
+#define                  MFSGPSEL  0x20       /* MFS General Purpose Output Select */
+#define                  MFSGPDAT  0x40       /* MFS General Purpose Output Data */
+
+/* Bit masks for MXVR_SCLK_CNT */
+
+#define                      SCNT  0xffff     /* System Clock Count */
+
+/* Bit masks for KPAD_CTL */
+
+#define                   KPAD_EN  0x1        /* Keypad Enable */
+#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
+#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
+#define                KPAD_COLEN  0xe000     /* Column Enable Width */
+
+/* Bit masks for KPAD_PRESCALE */
+
+#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
+
+/* Bit masks for KPAD_MSEL */
+
+#define                DBON_SCALE  0xff       /* Debounce Scale Value */
+#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
+
+/* Bit masks for KPAD_ROWCOL */
+
+#define                  KPAD_ROW  0xff       /* Rows Pressed */
+#define                  KPAD_COL  0xff00     /* Columns Pressed */
+
+/* Bit masks for KPAD_STAT */
+
+#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
+#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
+#define              KPAD_PRESSED  0x8        /* Key press current status */
+
+/* Bit masks for KPAD_SOFTEVAL */
+
+#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
+
+/* Bit masks for SDH_COMMAND */
+
+#define                   CMD_IDX  0x3f       /* Command Index */
+#define                   CMD_RSP  0x40       /* Response */
+#define                 CMD_L_RSP  0x80       /* Long Response */
+#define                 CMD_INT_E  0x100      /* Command Interrupt */
+#define                CMD_PEND_E  0x200      /* Command Pending */
+#define                     CMD_E  0x400      /* Command Enable */
+
+/* Bit masks for SDH_PWR_CTL */
+
+#define                    PWR_ON  0x3        /* Power On */
+#if 0
+#define                       TBD  0x3c       /* TBD */
+#endif
+#define                 SD_CMD_OD  0x40       /* Open Drain Output */
+#define                   ROD_CTL  0x80       /* Rod Control */
+
+/* Bit masks for SDH_CLK_CTL */
+
+#define                    CLKDIV  0xff       /* MC_CLK Divisor */
+#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
+#define                  PWR_SV_E  0x200      /* Power Save Enable */
+#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
+#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
+
+/* Bit masks for SDH_RESP_CMD */
+
+#define                  RESP_CMD  0x3f       /* Response Command */
+
+/* Bit masks for SDH_DATA_CTL */
+
+#define                     DTX_E  0x1        /* Data Transfer Enable */
+#define                   DTX_DIR  0x2        /* Data Transfer Direction */
+#define                  DTX_MODE  0x4        /* Data Transfer Mode */
+#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
+#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
+
+/* Bit masks for SDH_STATUS */
+
+#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
+#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
+#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
+#define                RX_OVERRUN  0x20       /* Receive Overrun */
+#define              CMD_RESP_END  0x40       /* CMD Response End */
+#define                  CMD_SENT  0x80       /* CMD Sent */
+#define                   DAT_END  0x100      /* Data End */
+#define             START_BIT_ERR  0x200      /* Start Bit Error */
+#define               DAT_BLK_END  0x400      /* Data Block End */
+#define                   CMD_ACT  0x800      /* CMD Active */
+#define                    TX_ACT  0x1000     /* Transmit Active */
+#define                    RX_ACT  0x2000     /* Receive Active */
+#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
+#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
+#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
+#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
+#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
+#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
+#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
+#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
+
+/* Bit masks for SDH_STATUS_CLR */
+
+#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
+#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
+#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
+#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
+#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
+#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
+#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
+#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
+#define              DAT_END_STAT  0x100      /* Data End Status */
+#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
+#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
+
+/* Bit masks for SDH_MASK0 */
+
+#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
+#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
+#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
+#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
+#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
+#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
+#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
+#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
+#define              DAT_END_MASK  0x100      /* Data End Mask */
+#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
+#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
+#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
+#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
+#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
+#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
+#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
+#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
+#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
+#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
+#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
+#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
+#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
+
+/* Bit masks for SDH_FIFO_CNT */
+
+#define                FIFO_COUNT  0x7fff     /* FIFO Count */
+
+/* Bit masks for SDH_E_STATUS */
+
+#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
+#define               SD_CARD_DET  0x10       /* SD Card Detect */
+
+/* Bit masks for SDH_E_MASK */
+
+#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
+#define                   SCD_MSK  0x40       /* Mask Card Detect */
+
+/* Bit masks for SDH_CFG */
+
+#define                   CLKS_EN  0x1        /* Clocks Enable */
+#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
+#define                       MWE  0x8        /* Moving Window Enable */
+#define                    SD_RST  0x10       /* SDMMC Reset */
+#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
+#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
+#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
+
+/* Bit masks for SDH_RD_WAIT_EN */
+
+#define                       RWR  0x1        /* Read Wait Request */
+
+/* Bit masks for ATAPI_CONTROL */
+
+#define                 PIO_START  0x1        /* Start PIO/Reg Op */
+#define               MULTI_START  0x2        /* Start Multi-DMA Op */
+#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
+#define                  XFER_DIR  0x8        /* Transfer Direction */
+#define                  IORDY_EN  0x10       /* IORDY Enable */
+#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
+#define                  SOFT_RST  0x40       /* Soft Reset */
+#define                   DEV_RST  0x80       /* Device Reset */
+#define                TFRCNT_RST  0x100      /* Trans Count Reset */
+#define               END_ON_TERM  0x200      /* End/Terminate Select */
+#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
+#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
+
+/* Bit masks for ATAPI_STATUS */
+
+#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
+#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
+#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
+#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
+
+/* Bit masks for ATAPI_DEV_ADDR */
+
+#define                  DEV_ADDR  0x1f       /* Device Address */
+
+/* Bit masks for ATAPI_INT_MASK */
+
+#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
+#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
+#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
+#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
+#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
+#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
+#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
+#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
+#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
+
+/* Bit masks for ATAPI_INT_STATUS */
+
+#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
+#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
+#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
+#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
+#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
+#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
+#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
+#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
+#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
+
+/* Bit masks for ATAPI_LINE_STATUS */
+
+#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
+#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
+#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
+#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
+#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
+#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
+#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
+#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
+#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
+#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_SM_STATE */
+
+#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
+#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
+#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
+#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
+
+/* Bit masks for ATAPI_TERMINATE */
+
+#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
+
+/* Bit masks for ATAPI_REG_TIM_0 */
+
+#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
+#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
+
+/* Bit masks for ATAPI_PIO_TIM_0 */
+
+#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
+#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
+#define                    T4_REG  0xf000     /* DIOW data hold */
+
+/* Bit masks for ATAPI_PIO_TIM_1 */
+
+#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
+
+/* Bit masks for ATAPI_MULTI_TIM_0 */
+
+#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
+#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
+
+/* Bit masks for ATAPI_MULTI_TIM_1 */
+
+#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
+#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
+
+/* Bit masks for ATAPI_MULTI_TIM_2 */
+
+#define                        TH  0xff       /* Selects DIOW data hold */
+#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
+
+/* Bit masks for ATAPI_ULTRA_TIM_0 */
+
+#define                      TACK  0xff       /* Selects setup and hold times for TACK */
+#define                      TENV  0xff00     /* Selects envelope time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_1 */
+
+#define                      TDVS  0xff       /* Selects data valid setup time */
+#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_2 */
+
+#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
+#define                      TMLI  0xff00     /* Selects interlock time */
+
+/* Bit masks for ATAPI_ULTRA_TIM_3 */
+
+#define                      TZAH  0xff       /* Selects minimum delay required for output */
+#define               READY_PAUSE  0xff00     /* Selects ready to pause */
+
+/* Bit masks for TIMER_ENABLE1 */
+
+#define                    TIMEN8  0x1        /* Timer 8 Enable */
+#define                    TIMEN9  0x2        /* Timer 9 Enable */
+#define                   TIMEN10  0x4        /* Timer 10 Enable */
+
+/* Bit masks for TIMER_DISABLE1 */
+
+#define                   TIMDIS8  0x1        /* Timer 8 Disable */
+#define                   TIMDIS9  0x2        /* Timer 9 Disable */
+#define                  TIMDIS10  0x4        /* Timer 10 Disable */
+
+/* Bit masks for TIMER_STATUS1 */
+
+#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
+#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
+#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
+#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
+#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
+#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
+#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
+#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
+#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
+
+/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
+
+/* Bit masks for USB_FADDR */
+
+#define          FUNCTION_ADDRESS  0x7f       /* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
+#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
+#define               RESUME_MODE  0x4        /* DMA Mode */
+#define                     RESET  0x8        /* Reset indicator */
+#define                   HS_MODE  0x10       /* High Speed mode indicator */
+#define                 HS_ENABLE  0x20       /* high Speed Enable */
+#define                 SOFT_CONN  0x40       /* Soft connect */
+#define                ISO_UPDATE  0x80       /* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
+#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
+#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
+#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
+#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
+#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
+#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
+#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
+#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
+#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
+#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
+#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
+#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
+#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
+#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
+#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
+#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
+#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
+#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
+#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
+#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
+#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
+#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
+#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
+#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
+#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
+#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define                 SUSPEND_B  0x1        /* Suspend indicator */
+#define                  RESUME_B  0x2        /* Resume indicator */
+#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
+#define                     SOF_B  0x8        /* Start of frame */
+#define                    CONN_B  0x10       /* Connection indicator */
+#define                  DISCON_B  0x20       /* Disconnect indicator */
+#define             SESSION_REQ_B  0x40       /* Session Request */
+#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
+#define                 RESUME_BE  0x2        /* Resume indicator int enable */
+#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
+#define                    SOF_BE  0x8        /* Start of frame int enable */
+#define                   CONN_BE  0x10       /* Connection indicator int enable */
+#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
+#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
+#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define              FRAME_NUMBER  0x7ff      /* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define                GLOBAL_ENA  0x1        /* enables USB module */
+#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
+#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
+#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
+#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
+#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
+#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
+#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
+#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
+#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
+#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
+#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
+#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
+#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
+#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define                   SESSION  0x1        /* session indicator */
+#define                  HOST_REQ  0x2        /* Host negotiation request */
+#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
+#define                     VBUS0  0x8        /* Vbus level indicator[0] */
+#define                     VBUS1  0x10       /* Vbus level indicator[1] */
+#define                     LSDEV  0x20       /* Low-speed indicator */
+#define                     FSDEV  0x40       /* Full or High-speed indicator */
+#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
+#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
+#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
+#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
+#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
+#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
+#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
+#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
+#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
+#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
+#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define                  RXPKTRDY  0x1        /* data packet receive indicator */
+#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
+#define                STALL_SENT  0x4        /* STALL handshake sent */
+#define                   DATAEND  0x8        /* Data end indicator */
+#define                  SETUPEND  0x10       /* Setup end */
+#define                 SENDSTALL  0x20       /* Send STALL handshake */
+#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
+#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
+#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
+#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
+#define                SETUPPKT_H  0x8        /* send Setup token host mode */
+#define                   ERROR_H  0x10       /* timeout error indicator host mode */
+#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
+#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
+#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
+#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
+#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
+#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
+#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
+#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
+#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
+#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
+#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
+#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
+#define                     ISO_T  0x4000     /* enable Isochronous transfers */
+#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_TH  0x4        /* error condition host mode */
+#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
+#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
+#define               FIFO_FULL_R  0x2        /* FIFO not empty */
+#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
+#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
+#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
+#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
+#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
+#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
+#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
+#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
+#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
+#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
+#define                     ISO_R  0x4000     /* enable Isochronous transfers */
+#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
+#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
+#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
+#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
+#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
+#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
+#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define            TARGET_EP_NO_T  0xf        /* EP number */
+#define                PROTOCOL_T  0xc        /* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define            TARGET_EP_NO_R  0xf        /* EP number */
+#define                PROTOCOL_R  0xc        /* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
+#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
+#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
+#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
+#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
+#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
+#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
+#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define                   DMA_ENA  0x1        /* DMA enable */
+#define                 DIRECTION  0x2        /* direction of DMA transfer */
+#define                      MODE  0x4        /* DMA Bus error */
+#define                   INT_ENA  0x8        /* Interrupt enable */
+#define                     EPNUM  0xf0       /* EP number */
+#define                  BUSERROR  0x100      /* DMA Bus error */
+
+/* Bit masks for USB_DMAxADDRHIGH */
+
+#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxADDRLOW */
+
+#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTHIGH */
+
+#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for USB_DMAxCOUNTLOW */
+
+#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
+
+/* Bit masks for HMDMAx_CONTROL */
+
+#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
+#define                       REP  0x2        /* Handshake MDMA Request Polarity */
+#define                       UTE  0x8        /* Urgency Threshold Enable */
+#define                       OIE  0x10       /* Overflow Interrupt Enable */
+#define                      BDIE  0x20       /* Block Done Interrupt Enable */
+#define                      MBDI  0x40       /* Mask Block Done Interrupt */
+#define                       DRQ  0x300      /* Handshake MDMA Request Type */
+#define                       RBC  0x1000     /* Force Reload of BCOUNT */
+#define                        PS  0x2000     /* Pin Status */
+#define                        OI  0x4000     /* Overflow Interrupt Generated */
+#define                       BDI  0x8000     /* Block Done Interrupt Generated */
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+/* ************************ */
+/*   MXVR Address Offsets   */
+/* ************************ */
+
+/* Control Message Receive Buffer (CMRB) Address Offsets */
+
+#define CMRB_STRIDE       0x00000016lu
+
+#define CMRB_DST_OFFSET   0x00000000lu
+#define CMRB_SRC_OFFSET   0x00000002lu
+#define CMRB_DATA_OFFSET  0x00000005lu
+
+/* Control Message Transmit Buffer (CMTB) Address Offsets */
+
+#define CMTB_PRIO_OFFSET    0x00000000lu
+#define CMTB_DST_OFFSET     0x00000002lu
+#define CMTB_SRC_OFFSET     0x00000004lu
+#define CMTB_TYPE_OFFSET    0x00000006lu
+#define CMTB_DATA_OFFSET    0x00000007lu
+
+#define CMTB_ANSWER_OFFSET  0x0000000Alu
+
+#define CMTB_STAT_N_OFFSET  0x00000018lu
+#define CMTB_STAT_A_OFFSET  0x00000016lu
+#define CMTB_STAT_D_OFFSET  0x0000000Elu
+#define CMTB_STAT_R_OFFSET  0x00000014lu
+#define CMTB_STAT_W_OFFSET  0x00000014lu
+#define CMTB_STAT_G_OFFSET  0x00000014lu
+
+/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */
+
+#define APRB_STRIDE       0x00000400lu
+
+#define APRB_DST_OFFSET   0x00000000lu
+#define APRB_LEN_OFFSET   0x00000002lu
+#define APRB_SRC_OFFSET   0x00000004lu
+#define APRB_DATA_OFFSET  0x00000006lu
+
+/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */
+
+#define APTB_PRIO_OFFSET  0x00000000lu
+#define APTB_DST_OFFSET   0x00000002lu
+#define APTB_LEN_OFFSET   0x00000004lu
+#define APTB_SRC_OFFSET   0x00000006lu
+#define APTB_DATA_OFFSET  0x00000008lu
+
+/* Remote Read Buffer (RRDB) Address Offsets */
+
+#define RRDB_WADDR_OFFSET 0x00000100lu
+#define RRDB_WLEN_OFFSET  0x00000101lu
+
+/* **************** */
+/*   MXVR Macros    */
+/* **************** */
+
+/* MXVR_CONFIG Macros */
+
+#define SET_MSB(x)       ( ( (x) & 0xF  ) << 9)
+
+/* MXVR_INT_STAT_1 Macros */
+
+#define DONEX(x)         (0x00000002 << (4 * (x)))
+#define HDONEX(x)        (0x00000001 << (4 * (x)))
+
+/* MXVR_INT_EN_1 Macros */
+
+#define DONEENX(x)       (0x00000002 << (4 * (x)))
+#define HDONEENX(x)      (0x00000001 << (4 * (x)))
+
+/* MXVR_CDRPLL_CTL Macros */
+
+#define SET_CDRSHPSEL(x) ( ( (x) & 0x3F ) << 16)
+
+/* MXVR_FMPLL_CTL Macros */
+
+#define SET_CDRCPSEL(x)  ( ( (x) & 0xFF ) << 24)
+#define SET_FMCPSEL(x)   ( ( (x) & 0xFF ) << 24)
+
+#endif /* _DEF_BF549_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
new file mode 100644
index 00000000000..e022e896cb1
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -0,0 +1,3956 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/defBF54x_base.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF54X_H
+#define _DEF_BF54X_H
+
+
+/* ************************************************************** */
+/*   SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x    */
+/* ************************************************************** */
+
+/* PLL Registers */
+
+#define                          PLL_CTL  0xffc00000   /* PLL Control Register */
+#define                          PLL_DIV  0xffc00004   /* PLL Divisor Register */
+#define                           VR_CTL  0xffc00008   /* Voltage Regulator Control Register */
+#define                         PLL_STAT  0xffc0000c   /* PLL Status Register */
+#define                      PLL_LOCKCNT  0xffc00010   /* PLL Lock Count Register */
+
+/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */
+
+#define                           CHIPID  0xffc00014
+/* CHIPID Masks */
+#define                   CHIPID_VERSION  0xF0000000
+#define                    CHIPID_FAMILY  0x0FFFF000
+#define               CHIPID_MANUFACTURE  0x00000FFE
+
+/* System Reset and Interrupt Controller (0xFFC00100 - 0xFFC00104) */
+
+#define                            SWRST  0xffc00100   /* Software Reset Register */
+#define                            SYSCR  0xffc00104   /* System Configuration register */
+
+/* SIC Registers */
+
+#define                       SIC_IMASK0  0xffc0010c   /* System Interrupt Mask Register 0 */
+#define                       SIC_IMASK1  0xffc00110   /* System Interrupt Mask Register 1 */
+#define                       SIC_IMASK2  0xffc00114   /* System Interrupt Mask Register 2 */
+#define                         SIC_ISR0  0xffc00118   /* System Interrupt Status Register 0 */
+#define                         SIC_ISR1  0xffc0011c   /* System Interrupt Status Register 1 */
+#define                         SIC_ISR2  0xffc00120   /* System Interrupt Status Register 2 */
+#define                         SIC_IWR0  0xffc00124   /* System Interrupt Wakeup Register 0 */
+#define                         SIC_IWR1  0xffc00128   /* System Interrupt Wakeup Register 1 */
+#define                         SIC_IWR2  0xffc0012c   /* System Interrupt Wakeup Register 2 */
+#define                         SIC_IAR0  0xffc00130   /* System Interrupt Assignment Register 0 */
+#define                         SIC_IAR1  0xffc00134   /* System Interrupt Assignment Register 1 */
+#define                         SIC_IAR2  0xffc00138   /* System Interrupt Assignment Register 2 */
+#define                         SIC_IAR3  0xffc0013c   /* System Interrupt Assignment Register 3 */
+#define                         SIC_IAR4  0xffc00140   /* System Interrupt Assignment Register 4 */
+#define                         SIC_IAR5  0xffc00144   /* System Interrupt Assignment Register 5 */
+#define                         SIC_IAR6  0xffc00148   /* System Interrupt Assignment Register 6 */
+#define                         SIC_IAR7  0xffc0014c   /* System Interrupt Assignment Register 7 */
+#define                         SIC_IAR8  0xffc00150   /* System Interrupt Assignment Register 8 */
+#define                         SIC_IAR9  0xffc00154   /* System Interrupt Assignment Register 9 */
+#define                        SIC_IAR10  0xffc00158   /* System Interrupt Assignment Register 10 */
+#define                        SIC_IAR11  0xffc0015c   /* System Interrupt Assignment Register 11 */
+
+/* Watchdog Timer Registers */
+
+#define                         WDOG_CTL  0xffc00200   /* Watchdog Control Register */
+#define                         WDOG_CNT  0xffc00204   /* Watchdog Count Register */
+#define                        WDOG_STAT  0xffc00208   /* Watchdog Status Register */
+
+/* RTC Registers */
+
+#define                         RTC_STAT  0xffc00300   /* RTC Status Register */
+#define                         RTC_ICTL  0xffc00304   /* RTC Interrupt Control Register */
+#define                        RTC_ISTAT  0xffc00308   /* RTC Interrupt Status Register */
+#define                        RTC_SWCNT  0xffc0030c   /* RTC Stopwatch Count Register */
+#define                        RTC_ALARM  0xffc00310   /* RTC Alarm Register */
+#define                         RTC_PREN  0xffc00314   /* RTC Prescaler Enable Register */
+
+/* UART0 Registers */
+
+#define                        UART0_DLL  0xffc00400   /* Divisor Latch Low Byte */
+#define                        UART0_DLH  0xffc00404   /* Divisor Latch High Byte */
+#define                       UART0_GCTL  0xffc00408   /* Global Control Register */
+#define                        UART0_LCR  0xffc0040c   /* Line Control Register */
+#define                        UART0_MCR  0xffc00410   /* Modem Control Register */
+#define                        UART0_LSR  0xffc00414   /* Line Status Register */
+#define                        UART0_MSR  0xffc00418   /* Modem Status Register */
+#define                        UART0_SCR  0xffc0041c   /* Scratch Register */
+#define                    UART0_IER_SET  0xffc00420   /* Interrupt Enable Register Set */
+#define                  UART0_IER_CLEAR  0xffc00424   /* Interrupt Enable Register Clear */
+#define                        UART0_THR  0xffc00428   /* Transmit Hold Register */
+#define                        UART0_RBR  0xffc0042c   /* Receive Buffer Register */
+
+/* SPI0 Registers */
+
+#define                     SPI0_REGBASE  0xffc00500
+#define                         SPI0_CTL  0xffc00500   /* SPI0 Control Register */
+#define                         SPI0_FLG  0xffc00504   /* SPI0 Flag Register */
+#define                        SPI0_STAT  0xffc00508   /* SPI0 Status Register */
+#define                        SPI0_TDBR  0xffc0050c   /* SPI0 Transmit Data Buffer Register */
+#define                        SPI0_RDBR  0xffc00510   /* SPI0 Receive Data Buffer Register */
+#define                        SPI0_BAUD  0xffc00514   /* SPI0 Baud Rate Register */
+#define                      SPI0_SHADOW  0xffc00518   /* SPI0 Receive Data Buffer Shadow Register */
+
+/* Timer Group of 3 registers are not defined in the shared file because they are not available on the ADSP-BF542 processor */
+
+/* Two Wire Interface Registers (TWI0) */
+
+#define                     TWI0_REGBASE  0xffc00700
+#define                      TWI0_CLKDIV  0xffc00700   /* Clock Divider Register */
+#define                     TWI0_CONTROL  0xffc00704   /* TWI Control Register */
+#define                  TWI0_SLAVE_CTRL  0xffc00708   /* TWI Slave Mode Control Register */
+#define                  TWI0_SLAVE_STAT  0xffc0070c   /* TWI Slave Mode Status Register */
+#define                  TWI0_SLAVE_ADDR  0xffc00710   /* TWI Slave Mode Address Register */
+#define                 TWI0_MASTER_CTRL  0xffc00714   /* TWI Master Mode Control Register */
+#define                 TWI0_MASTER_STAT  0xffc00718   /* TWI Master Mode Status Register */
+#define                 TWI0_MASTER_ADDR  0xffc0071c   /* TWI Master Mode Address Register */
+#define                    TWI0_INT_STAT  0xffc00720   /* TWI Interrupt Status Register */
+#define                    TWI0_INT_MASK  0xffc00724   /* TWI Interrupt Mask Register */
+#define                   TWI0_FIFO_CTRL  0xffc00728   /* TWI FIFO Control Register */
+#define                   TWI0_FIFO_STAT  0xffc0072c   /* TWI FIFO Status Register */
+#define                   TWI0_XMT_DATA8  0xffc00780   /* TWI FIFO Transmit Data Single Byte Register */
+#define                  TWI0_XMT_DATA16  0xffc00784   /* TWI FIFO Transmit Data Double Byte Register */
+#define                   TWI0_RCV_DATA8  0xffc00788   /* TWI FIFO Receive Data Single Byte Register */
+#define                  TWI0_RCV_DATA16  0xffc0078c   /* TWI FIFO Receive Data Double Byte Register */
+
+/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 processors */
+
+/* SPORT1 Registers */
+
+#define                      SPORT1_TCR1  0xffc00900   /* SPORT1 Transmit Configuration 1 Register */
+#define                      SPORT1_TCR2  0xffc00904   /* SPORT1 Transmit Configuration 2 Register */
+#define                   SPORT1_TCLKDIV  0xffc00908   /* SPORT1 Transmit Serial Clock Divider Register */
+#define                    SPORT1_TFSDIV  0xffc0090c   /* SPORT1 Transmit Frame Sync Divider Register */
+#define                        SPORT1_TX  0xffc00910   /* SPORT1 Transmit Data Register */
+#define                        SPORT1_RX  0xffc00918   /* SPORT1 Receive Data Register */
+#define                      SPORT1_RCR1  0xffc00920   /* SPORT1 Receive Configuration 1 Register */
+#define                      SPORT1_RCR2  0xffc00924   /* SPORT1 Receive Configuration 2 Register */
+#define                   SPORT1_RCLKDIV  0xffc00928   /* SPORT1 Receive Serial Clock Divider Register */
+#define                    SPORT1_RFSDIV  0xffc0092c   /* SPORT1 Receive Frame Sync Divider Register */
+#define                      SPORT1_STAT  0xffc00930   /* SPORT1 Status Register */
+#define                      SPORT1_CHNL  0xffc00934   /* SPORT1 Current Channel Register */
+#define                     SPORT1_MCMC1  0xffc00938   /* SPORT1 Multi channel Configuration Register 1 */
+#define                     SPORT1_MCMC2  0xffc0093c   /* SPORT1 Multi channel Configuration Register 2 */
+#define                     SPORT1_MTCS0  0xffc00940   /* SPORT1 Multi channel Transmit Select Register 0 */
+#define                     SPORT1_MTCS1  0xffc00944   /* SPORT1 Multi channel Transmit Select Register 1 */
+#define                     SPORT1_MTCS2  0xffc00948   /* SPORT1 Multi channel Transmit Select Register 2 */
+#define                     SPORT1_MTCS3  0xffc0094c   /* SPORT1 Multi channel Transmit Select Register 3 */
+#define                     SPORT1_MRCS0  0xffc00950   /* SPORT1 Multi channel Receive Select Register 0 */
+#define                     SPORT1_MRCS1  0xffc00954   /* SPORT1 Multi channel Receive Select Register 1 */
+#define                     SPORT1_MRCS2  0xffc00958   /* SPORT1 Multi channel Receive Select Register 2 */
+#define                     SPORT1_MRCS3  0xffc0095c   /* SPORT1 Multi channel Receive Select Register 3 */
+
+/* Asynchronous Memory Control Registers */
+
+#define                      EBIU_AMGCTL  0xffc00a00   /* Asynchronous Memory Global Control Register */
+#define                    EBIU_AMBCTL0   0xffc00a04   /* Asynchronous Memory Bank Control Register */
+#define                    EBIU_AMBCTL1   0xffc00a08   /* Asynchronous Memory Bank Control Register */
+#define                      EBIU_MBSCTL  0xffc00a0c   /* Asynchronous Memory Bank Select Control Register */
+#define                     EBIU_ARBSTAT  0xffc00a10   /* Asynchronous Memory Arbiter Status Register */
+#define                        EBIU_MODE  0xffc00a14   /* Asynchronous Mode Control Register */
+#define                        EBIU_FCTL  0xffc00a18   /* Asynchronous Memory Flash Control Register */
+
+/* DDR Memory Control Registers */
+
+#define                     EBIU_DDRCTL0  0xffc00a20   /* DDR Memory Control 0 Register */
+#define                     EBIU_DDRCTL1  0xffc00a24   /* DDR Memory Control 1 Register */
+#define                     EBIU_DDRCTL2  0xffc00a28   /* DDR Memory Control 2 Register */
+#define                     EBIU_DDRCTL3  0xffc00a2c   /* DDR Memory Control 3 Register */
+#define                      EBIU_DDRQUE  0xffc00a30   /* DDR Queue Configuration Register */
+#define                      EBIU_ERRADD  0xffc00a34   /* DDR Error Address Register */
+#define                      EBIU_ERRMST  0xffc00a38   /* DDR Error Master Register */
+#define                      EBIU_RSTCTL  0xffc00a3c   /* DDR Reset Control Register */
+
+/* DDR BankRead and Write Count Registers */
+
+#define                     EBIU_DDRBRC0  0xffc00a60   /* DDR Bank0 Read Count Register */
+#define                     EBIU_DDRBRC1  0xffc00a64   /* DDR Bank1 Read Count Register */
+#define                     EBIU_DDRBRC2  0xffc00a68   /* DDR Bank2 Read Count Register */
+#define                     EBIU_DDRBRC3  0xffc00a6c   /* DDR Bank3 Read Count Register */
+#define                     EBIU_DDRBRC4  0xffc00a70   /* DDR Bank4 Read Count Register */
+#define                     EBIU_DDRBRC5  0xffc00a74   /* DDR Bank5 Read Count Register */
+#define                     EBIU_DDRBRC6  0xffc00a78   /* DDR Bank6 Read Count Register */
+#define                     EBIU_DDRBRC7  0xffc00a7c   /* DDR Bank7 Read Count Register */
+#define                     EBIU_DDRBWC0  0xffc00a80   /* DDR Bank0 Write Count Register */
+#define                     EBIU_DDRBWC1  0xffc00a84   /* DDR Bank1 Write Count Register */
+#define                     EBIU_DDRBWC2  0xffc00a88   /* DDR Bank2 Write Count Register */
+#define                     EBIU_DDRBWC3  0xffc00a8c   /* DDR Bank3 Write Count Register */
+#define                     EBIU_DDRBWC4  0xffc00a90   /* DDR Bank4 Write Count Register */
+#define                     EBIU_DDRBWC5  0xffc00a94   /* DDR Bank5 Write Count Register */
+#define                     EBIU_DDRBWC6  0xffc00a98   /* DDR Bank6 Write Count Register */
+#define                     EBIU_DDRBWC7  0xffc00a9c   /* DDR Bank7 Write Count Register */
+#define                     EBIU_DDRACCT  0xffc00aa0   /* DDR Activation Count Register */
+#define                     EBIU_DDRTACT  0xffc00aa8   /* DDR Turn Around Count Register */
+#define                     EBIU_DDRARCT  0xffc00aac   /* DDR Auto-refresh Count Register */
+#define                      EBIU_DDRGC0  0xffc00ab0   /* DDR Grant Count 0 Register */
+#define                      EBIU_DDRGC1  0xffc00ab4   /* DDR Grant Count 1 Register */
+#define                      EBIU_DDRGC2  0xffc00ab8   /* DDR Grant Count 2 Register */
+#define                      EBIU_DDRGC3  0xffc00abc   /* DDR Grant Count 3 Register */
+#define                     EBIU_DDRMCEN  0xffc00ac0   /* DDR Metrics Counter Enable Register */
+#define                     EBIU_DDRMCCL  0xffc00ac4   /* DDR Metrics Counter Clear Register */
+
+/* DMAC0 Registers */
+
+#define                      DMAC0_TCPER  0xffc00b0c   /* DMA Controller 0 Traffic Control Periods Register */
+#define                      DMAC0_TCCNT  0xffc00b10   /* DMA Controller 0 Current Counts Register */
+
+/* DMA Channel 0 Registers */
+
+#define               DMA0_NEXT_DESC_PTR  0xffc00c00   /* DMA Channel 0 Next Descriptor Pointer Register */
+#define                  DMA0_START_ADDR  0xffc00c04   /* DMA Channel 0 Start Address Register */
+#define                      DMA0_CONFIG  0xffc00c08   /* DMA Channel 0 Configuration Register */
+#define                     DMA0_X_COUNT  0xffc00c10   /* DMA Channel 0 X Count Register */
+#define                    DMA0_X_MODIFY  0xffc00c14   /* DMA Channel 0 X Modify Register */
+#define                     DMA0_Y_COUNT  0xffc00c18   /* DMA Channel 0 Y Count Register */
+#define                    DMA0_Y_MODIFY  0xffc00c1c   /* DMA Channel 0 Y Modify Register */
+#define               DMA0_CURR_DESC_PTR  0xffc00c20   /* DMA Channel 0 Current Descriptor Pointer Register */
+#define                   DMA0_CURR_ADDR  0xffc00c24   /* DMA Channel 0 Current Address Register */
+#define                  DMA0_IRQ_STATUS  0xffc00c28   /* DMA Channel 0 Interrupt/Status Register */
+#define              DMA0_PERIPHERAL_MAP  0xffc00c2c   /* DMA Channel 0 Peripheral Map Register */
+#define                DMA0_CURR_X_COUNT  0xffc00c30   /* DMA Channel 0 Current X Count Register */
+#define                DMA0_CURR_Y_COUNT  0xffc00c38   /* DMA Channel 0 Current Y Count Register */
+
+/* DMA Channel 1 Registers */
+
+#define               DMA1_NEXT_DESC_PTR  0xffc00c40   /* DMA Channel 1 Next Descriptor Pointer Register */
+#define                  DMA1_START_ADDR  0xffc00c44   /* DMA Channel 1 Start Address Register */
+#define                      DMA1_CONFIG  0xffc00c48   /* DMA Channel 1 Configuration Register */
+#define                     DMA1_X_COUNT  0xffc00c50   /* DMA Channel 1 X Count Register */
+#define                    DMA1_X_MODIFY  0xffc00c54   /* DMA Channel 1 X Modify Register */
+#define                     DMA1_Y_COUNT  0xffc00c58   /* DMA Channel 1 Y Count Register */
+#define                    DMA1_Y_MODIFY  0xffc00c5c   /* DMA Channel 1 Y Modify Register */
+#define               DMA1_CURR_DESC_PTR  0xffc00c60   /* DMA Channel 1 Current Descriptor Pointer Register */
+#define                   DMA1_CURR_ADDR  0xffc00c64   /* DMA Channel 1 Current Address Register */
+#define                  DMA1_IRQ_STATUS  0xffc00c68   /* DMA Channel 1 Interrupt/Status Register */
+#define              DMA1_PERIPHERAL_MAP  0xffc00c6c   /* DMA Channel 1 Peripheral Map Register */
+#define                DMA1_CURR_X_COUNT  0xffc00c70   /* DMA Channel 1 Current X Count Register */
+#define                DMA1_CURR_Y_COUNT  0xffc00c78   /* DMA Channel 1 Current Y Count Register */
+
+/* DMA Channel 2 Registers */
+
+#define               DMA2_NEXT_DESC_PTR  0xffc00c80   /* DMA Channel 2 Next Descriptor Pointer Register */
+#define                  DMA2_START_ADDR  0xffc00c84   /* DMA Channel 2 Start Address Register */
+#define                      DMA2_CONFIG  0xffc00c88   /* DMA Channel 2 Configuration Register */
+#define                     DMA2_X_COUNT  0xffc00c90   /* DMA Channel 2 X Count Register */
+#define                    DMA2_X_MODIFY  0xffc00c94   /* DMA Channel 2 X Modify Register */
+#define                     DMA2_Y_COUNT  0xffc00c98   /* DMA Channel 2 Y Count Register */
+#define                    DMA2_Y_MODIFY  0xffc00c9c   /* DMA Channel 2 Y Modify Register */
+#define               DMA2_CURR_DESC_PTR  0xffc00ca0   /* DMA Channel 2 Current Descriptor Pointer Register */
+#define                   DMA2_CURR_ADDR  0xffc00ca4   /* DMA Channel 2 Current Address Register */
+#define                  DMA2_IRQ_STATUS  0xffc00ca8   /* DMA Channel 2 Interrupt/Status Register */
+#define              DMA2_PERIPHERAL_MAP  0xffc00cac   /* DMA Channel 2 Peripheral Map Register */
+#define                DMA2_CURR_X_COUNT  0xffc00cb0   /* DMA Channel 2 Current X Count Register */
+#define                DMA2_CURR_Y_COUNT  0xffc00cb8   /* DMA Channel 2 Current Y Count Register */
+
+/* DMA Channel 3 Registers */
+
+#define               DMA3_NEXT_DESC_PTR  0xffc00cc0   /* DMA Channel 3 Next Descriptor Pointer Register */
+#define                  DMA3_START_ADDR  0xffc00cc4   /* DMA Channel 3 Start Address Register */
+#define                      DMA3_CONFIG  0xffc00cc8   /* DMA Channel 3 Configuration Register */
+#define                     DMA3_X_COUNT  0xffc00cd0   /* DMA Channel 3 X Count Register */
+#define                    DMA3_X_MODIFY  0xffc00cd4   /* DMA Channel 3 X Modify Register */
+#define                     DMA3_Y_COUNT  0xffc00cd8   /* DMA Channel 3 Y Count Register */
+#define                    DMA3_Y_MODIFY  0xffc00cdc   /* DMA Channel 3 Y Modify Register */
+#define               DMA3_CURR_DESC_PTR  0xffc00ce0   /* DMA Channel 3 Current Descriptor Pointer Register */
+#define                   DMA3_CURR_ADDR  0xffc00ce4   /* DMA Channel 3 Current Address Register */
+#define                  DMA3_IRQ_STATUS  0xffc00ce8   /* DMA Channel 3 Interrupt/Status Register */
+#define              DMA3_PERIPHERAL_MAP  0xffc00cec   /* DMA Channel 3 Peripheral Map Register */
+#define                DMA3_CURR_X_COUNT  0xffc00cf0   /* DMA Channel 3 Current X Count Register */
+#define                DMA3_CURR_Y_COUNT  0xffc00cf8   /* DMA Channel 3 Current Y Count Register */
+
+/* DMA Channel 4 Registers */
+
+#define               DMA4_NEXT_DESC_PTR  0xffc00d00   /* DMA Channel 4 Next Descriptor Pointer Register */
+#define                  DMA4_START_ADDR  0xffc00d04   /* DMA Channel 4 Start Address Register */
+#define                      DMA4_CONFIG  0xffc00d08   /* DMA Channel 4 Configuration Register */
+#define                     DMA4_X_COUNT  0xffc00d10   /* DMA Channel 4 X Count Register */
+#define                    DMA4_X_MODIFY  0xffc00d14   /* DMA Channel 4 X Modify Register */
+#define                     DMA4_Y_COUNT  0xffc00d18   /* DMA Channel 4 Y Count Register */
+#define                    DMA4_Y_MODIFY  0xffc00d1c   /* DMA Channel 4 Y Modify Register */
+#define               DMA4_CURR_DESC_PTR  0xffc00d20   /* DMA Channel 4 Current Descriptor Pointer Register */
+#define                   DMA4_CURR_ADDR  0xffc00d24   /* DMA Channel 4 Current Address Register */
+#define                  DMA4_IRQ_STATUS  0xffc00d28   /* DMA Channel 4 Interrupt/Status Register */
+#define              DMA4_PERIPHERAL_MAP  0xffc00d2c   /* DMA Channel 4 Peripheral Map Register */
+#define                DMA4_CURR_X_COUNT  0xffc00d30   /* DMA Channel 4 Current X Count Register */
+#define                DMA4_CURR_Y_COUNT  0xffc00d38   /* DMA Channel 4 Current Y Count Register */
+
+/* DMA Channel 5 Registers */
+
+#define               DMA5_NEXT_DESC_PTR  0xffc00d40   /* DMA Channel 5 Next Descriptor Pointer Register */
+#define                  DMA5_START_ADDR  0xffc00d44   /* DMA Channel 5 Start Address Register */
+#define                      DMA5_CONFIG  0xffc00d48   /* DMA Channel 5 Configuration Register */
+#define                     DMA5_X_COUNT  0xffc00d50   /* DMA Channel 5 X Count Register */
+#define                    DMA5_X_MODIFY  0xffc00d54   /* DMA Channel 5 X Modify Register */
+#define                     DMA5_Y_COUNT  0xffc00d58   /* DMA Channel 5 Y Count Register */
+#define                    DMA5_Y_MODIFY  0xffc00d5c   /* DMA Channel 5 Y Modify Register */
+#define               DMA5_CURR_DESC_PTR  0xffc00d60   /* DMA Channel 5 Current Descriptor Pointer Register */
+#define                   DMA5_CURR_ADDR  0xffc00d64   /* DMA Channel 5 Current Address Register */
+#define                  DMA5_IRQ_STATUS  0xffc00d68   /* DMA Channel 5 Interrupt/Status Register */
+#define              DMA5_PERIPHERAL_MAP  0xffc00d6c   /* DMA Channel 5 Peripheral Map Register */
+#define                DMA5_CURR_X_COUNT  0xffc00d70   /* DMA Channel 5 Current X Count Register */
+#define                DMA5_CURR_Y_COUNT  0xffc00d78   /* DMA Channel 5 Current Y Count Register */
+
+/* DMA Channel 6 Registers */
+
+#define               DMA6_NEXT_DESC_PTR  0xffc00d80   /* DMA Channel 6 Next Descriptor Pointer Register */
+#define                  DMA6_START_ADDR  0xffc00d84   /* DMA Channel 6 Start Address Register */
+#define                      DMA6_CONFIG  0xffc00d88   /* DMA Channel 6 Configuration Register */
+#define                     DMA6_X_COUNT  0xffc00d90   /* DMA Channel 6 X Count Register */
+#define                    DMA6_X_MODIFY  0xffc00d94   /* DMA Channel 6 X Modify Register */
+#define                     DMA6_Y_COUNT  0xffc00d98   /* DMA Channel 6 Y Count Register */
+#define                    DMA6_Y_MODIFY  0xffc00d9c   /* DMA Channel 6 Y Modify Register */
+#define               DMA6_CURR_DESC_PTR  0xffc00da0   /* DMA Channel 6 Current Descriptor Pointer Register */
+#define                   DMA6_CURR_ADDR  0xffc00da4   /* DMA Channel 6 Current Address Register */
+#define                  DMA6_IRQ_STATUS  0xffc00da8   /* DMA Channel 6 Interrupt/Status Register */
+#define              DMA6_PERIPHERAL_MAP  0xffc00dac   /* DMA Channel 6 Peripheral Map Register */
+#define                DMA6_CURR_X_COUNT  0xffc00db0   /* DMA Channel 6 Current X Count Register */
+#define                DMA6_CURR_Y_COUNT  0xffc00db8   /* DMA Channel 6 Current Y Count Register */
+
+/* DMA Channel 7 Registers */
+
+#define               DMA7_NEXT_DESC_PTR  0xffc00dc0   /* DMA Channel 7 Next Descriptor Pointer Register */
+#define                  DMA7_START_ADDR  0xffc00dc4   /* DMA Channel 7 Start Address Register */
+#define                      DMA7_CONFIG  0xffc00dc8   /* DMA Channel 7 Configuration Register */
+#define                     DMA7_X_COUNT  0xffc00dd0   /* DMA Channel 7 X Count Register */
+#define                    DMA7_X_MODIFY  0xffc00dd4   /* DMA Channel 7 X Modify Register */
+#define                     DMA7_Y_COUNT  0xffc00dd8   /* DMA Channel 7 Y Count Register */
+#define                    DMA7_Y_MODIFY  0xffc00ddc   /* DMA Channel 7 Y Modify Register */
+#define               DMA7_CURR_DESC_PTR  0xffc00de0   /* DMA Channel 7 Current Descriptor Pointer Register */
+#define                   DMA7_CURR_ADDR  0xffc00de4   /* DMA Channel 7 Current Address Register */
+#define                  DMA7_IRQ_STATUS  0xffc00de8   /* DMA Channel 7 Interrupt/Status Register */
+#define              DMA7_PERIPHERAL_MAP  0xffc00dec   /* DMA Channel 7 Peripheral Map Register */
+#define                DMA7_CURR_X_COUNT  0xffc00df0   /* DMA Channel 7 Current X Count Register */
+#define                DMA7_CURR_Y_COUNT  0xffc00df8   /* DMA Channel 7 Current Y Count Register */
+
+/* DMA Channel 8 Registers */
+
+#define               DMA8_NEXT_DESC_PTR  0xffc00e00   /* DMA Channel 8 Next Descriptor Pointer Register */
+#define                  DMA8_START_ADDR  0xffc00e04   /* DMA Channel 8 Start Address Register */
+#define                      DMA8_CONFIG  0xffc00e08   /* DMA Channel 8 Configuration Register */
+#define                     DMA8_X_COUNT  0xffc00e10   /* DMA Channel 8 X Count Register */
+#define                    DMA8_X_MODIFY  0xffc00e14   /* DMA Channel 8 X Modify Register */
+#define                     DMA8_Y_COUNT  0xffc00e18   /* DMA Channel 8 Y Count Register */
+#define                    DMA8_Y_MODIFY  0xffc00e1c   /* DMA Channel 8 Y Modify Register */
+#define               DMA8_CURR_DESC_PTR  0xffc00e20   /* DMA Channel 8 Current Descriptor Pointer Register */
+#define                   DMA8_CURR_ADDR  0xffc00e24   /* DMA Channel 8 Current Address Register */
+#define                  DMA8_IRQ_STATUS  0xffc00e28   /* DMA Channel 8 Interrupt/Status Register */
+#define              DMA8_PERIPHERAL_MAP  0xffc00e2c   /* DMA Channel 8 Peripheral Map Register */
+#define                DMA8_CURR_X_COUNT  0xffc00e30   /* DMA Channel 8 Current X Count Register */
+#define                DMA8_CURR_Y_COUNT  0xffc00e38   /* DMA Channel 8 Current Y Count Register */
+
+/* DMA Channel 9 Registers */
+
+#define               DMA9_NEXT_DESC_PTR  0xffc00e40   /* DMA Channel 9 Next Descriptor Pointer Register */
+#define                  DMA9_START_ADDR  0xffc00e44   /* DMA Channel 9 Start Address Register */
+#define                      DMA9_CONFIG  0xffc00e48   /* DMA Channel 9 Configuration Register */
+#define                     DMA9_X_COUNT  0xffc00e50   /* DMA Channel 9 X Count Register */
+#define                    DMA9_X_MODIFY  0xffc00e54   /* DMA Channel 9 X Modify Register */
+#define                     DMA9_Y_COUNT  0xffc00e58   /* DMA Channel 9 Y Count Register */
+#define                    DMA9_Y_MODIFY  0xffc00e5c   /* DMA Channel 9 Y Modify Register */
+#define               DMA9_CURR_DESC_PTR  0xffc00e60   /* DMA Channel 9 Current Descriptor Pointer Register */
+#define                   DMA9_CURR_ADDR  0xffc00e64   /* DMA Channel 9 Current Address Register */
+#define                  DMA9_IRQ_STATUS  0xffc00e68   /* DMA Channel 9 Interrupt/Status Register */
+#define              DMA9_PERIPHERAL_MAP  0xffc00e6c   /* DMA Channel 9 Peripheral Map Register */
+#define                DMA9_CURR_X_COUNT  0xffc00e70   /* DMA Channel 9 Current X Count Register */
+#define                DMA9_CURR_Y_COUNT  0xffc00e78   /* DMA Channel 9 Current Y Count Register */
+
+/* DMA Channel 10 Registers */
+
+#define              DMA10_NEXT_DESC_PTR  0xffc00e80   /* DMA Channel 10 Next Descriptor Pointer Register */
+#define                 DMA10_START_ADDR  0xffc00e84   /* DMA Channel 10 Start Address Register */
+#define                     DMA10_CONFIG  0xffc00e88   /* DMA Channel 10 Configuration Register */
+#define                    DMA10_X_COUNT  0xffc00e90   /* DMA Channel 10 X Count Register */
+#define                   DMA10_X_MODIFY  0xffc00e94   /* DMA Channel 10 X Modify Register */
+#define                    DMA10_Y_COUNT  0xffc00e98   /* DMA Channel 10 Y Count Register */
+#define                   DMA10_Y_MODIFY  0xffc00e9c   /* DMA Channel 10 Y Modify Register */
+#define              DMA10_CURR_DESC_PTR  0xffc00ea0   /* DMA Channel 10 Current Descriptor Pointer Register */
+#define                  DMA10_CURR_ADDR  0xffc00ea4   /* DMA Channel 10 Current Address Register */
+#define                 DMA10_IRQ_STATUS  0xffc00ea8   /* DMA Channel 10 Interrupt/Status Register */
+#define             DMA10_PERIPHERAL_MAP  0xffc00eac   /* DMA Channel 10 Peripheral Map Register */
+#define               DMA10_CURR_X_COUNT  0xffc00eb0   /* DMA Channel 10 Current X Count Register */
+#define               DMA10_CURR_Y_COUNT  0xffc00eb8   /* DMA Channel 10 Current Y Count Register */
+
+/* DMA Channel 11 Registers */
+
+#define              DMA11_NEXT_DESC_PTR  0xffc00ec0   /* DMA Channel 11 Next Descriptor Pointer Register */
+#define                 DMA11_START_ADDR  0xffc00ec4   /* DMA Channel 11 Start Address Register */
+#define                     DMA11_CONFIG  0xffc00ec8   /* DMA Channel 11 Configuration Register */
+#define                    DMA11_X_COUNT  0xffc00ed0   /* DMA Channel 11 X Count Register */
+#define                   DMA11_X_MODIFY  0xffc00ed4   /* DMA Channel 11 X Modify Register */
+#define                    DMA11_Y_COUNT  0xffc00ed8   /* DMA Channel 11 Y Count Register */
+#define                   DMA11_Y_MODIFY  0xffc00edc   /* DMA Channel 11 Y Modify Register */
+#define              DMA11_CURR_DESC_PTR  0xffc00ee0   /* DMA Channel 11 Current Descriptor Pointer Register */
+#define                  DMA11_CURR_ADDR  0xffc00ee4   /* DMA Channel 11 Current Address Register */
+#define                 DMA11_IRQ_STATUS  0xffc00ee8   /* DMA Channel 11 Interrupt/Status Register */
+#define             DMA11_PERIPHERAL_MAP  0xffc00eec   /* DMA Channel 11 Peripheral Map Register */
+#define               DMA11_CURR_X_COUNT  0xffc00ef0   /* DMA Channel 11 Current X Count Register */
+#define               DMA11_CURR_Y_COUNT  0xffc00ef8   /* DMA Channel 11 Current Y Count Register */
+
+/* MDMA Stream 0 Registers */
+
+#define            MDMA_D0_NEXT_DESC_PTR  0xffc00f00   /* Memory DMA Stream 0 Destination Next Descriptor Pointer Register */
+#define               MDMA_D0_START_ADDR  0xffc00f04   /* Memory DMA Stream 0 Destination Start Address Register */
+#define                   MDMA_D0_CONFIG  0xffc00f08   /* Memory DMA Stream 0 Destination Configuration Register */
+#define                  MDMA_D0_X_COUNT  0xffc00f10   /* Memory DMA Stream 0 Destination X Count Register */
+#define                 MDMA_D0_X_MODIFY  0xffc00f14   /* Memory DMA Stream 0 Destination X Modify Register */
+#define                  MDMA_D0_Y_COUNT  0xffc00f18   /* Memory DMA Stream 0 Destination Y Count Register */
+#define                 MDMA_D0_Y_MODIFY  0xffc00f1c   /* Memory DMA Stream 0 Destination Y Modify Register */
+#define            MDMA_D0_CURR_DESC_PTR  0xffc00f20   /* Memory DMA Stream 0 Destination Current Descriptor Pointer Register */
+#define                MDMA_D0_CURR_ADDR  0xffc00f24   /* Memory DMA Stream 0 Destination Current Address Register */
+#define               MDMA_D0_IRQ_STATUS  0xffc00f28   /* Memory DMA Stream 0 Destination Interrupt/Status Register */
+#define           MDMA_D0_PERIPHERAL_MAP  0xffc00f2c   /* Memory DMA Stream 0 Destination Peripheral Map Register */
+#define             MDMA_D0_CURR_X_COUNT  0xffc00f30   /* Memory DMA Stream 0 Destination Current X Count Register */
+#define             MDMA_D0_CURR_Y_COUNT  0xffc00f38   /* Memory DMA Stream 0 Destination Current Y Count Register */
+#define            MDMA_S0_NEXT_DESC_PTR  0xffc00f40   /* Memory DMA Stream 0 Source Next Descriptor Pointer Register */
+#define               MDMA_S0_START_ADDR  0xffc00f44   /* Memory DMA Stream 0 Source Start Address Register */
+#define                   MDMA_S0_CONFIG  0xffc00f48   /* Memory DMA Stream 0 Source Configuration Register */
+#define                  MDMA_S0_X_COUNT  0xffc00f50   /* Memory DMA Stream 0 Source X Count Register */
+#define                 MDMA_S0_X_MODIFY  0xffc00f54   /* Memory DMA Stream 0 Source X Modify Register */
+#define                  MDMA_S0_Y_COUNT  0xffc00f58   /* Memory DMA Stream 0 Source Y Count Register */
+#define                 MDMA_S0_Y_MODIFY  0xffc00f5c   /* Memory DMA Stream 0 Source Y Modify Register */
+#define            MDMA_S0_CURR_DESC_PTR  0xffc00f60   /* Memory DMA Stream 0 Source Current Descriptor Pointer Register */
+#define                MDMA_S0_CURR_ADDR  0xffc00f64   /* Memory DMA Stream 0 Source Current Address Register */
+#define               MDMA_S0_IRQ_STATUS  0xffc00f68   /* Memory DMA Stream 0 Source Interrupt/Status Register */
+#define           MDMA_S0_PERIPHERAL_MAP  0xffc00f6c   /* Memory DMA Stream 0 Source Peripheral Map Register */
+#define             MDMA_S0_CURR_X_COUNT  0xffc00f70   /* Memory DMA Stream 0 Source Current X Count Register */
+#define             MDMA_S0_CURR_Y_COUNT  0xffc00f78   /* Memory DMA Stream 0 Source Current Y Count Register */
+
+/* MDMA Stream 1 Registers */
+
+#define            MDMA_D1_NEXT_DESC_PTR  0xffc00f80   /* Memory DMA Stream 1 Destination Next Descriptor Pointer Register */
+#define               MDMA_D1_START_ADDR  0xffc00f84   /* Memory DMA Stream 1 Destination Start Address Register */
+#define                   MDMA_D1_CONFIG  0xffc00f88   /* Memory DMA Stream 1 Destination Configuration Register */
+#define                  MDMA_D1_X_COUNT  0xffc00f90   /* Memory DMA Stream 1 Destination X Count Register */
+#define                 MDMA_D1_X_MODIFY  0xffc00f94   /* Memory DMA Stream 1 Destination X Modify Register */
+#define                  MDMA_D1_Y_COUNT  0xffc00f98   /* Memory DMA Stream 1 Destination Y Count Register */
+#define                 MDMA_D1_Y_MODIFY  0xffc00f9c   /* Memory DMA Stream 1 Destination Y Modify Register */
+#define            MDMA_D1_CURR_DESC_PTR  0xffc00fa0   /* Memory DMA Stream 1 Destination Current Descriptor Pointer Register */
+#define                MDMA_D1_CURR_ADDR  0xffc00fa4   /* Memory DMA Stream 1 Destination Current Address Register */
+#define               MDMA_D1_IRQ_STATUS  0xffc00fa8   /* Memory DMA Stream 1 Destination Interrupt/Status Register */
+#define           MDMA_D1_PERIPHERAL_MAP  0xffc00fac   /* Memory DMA Stream 1 Destination Peripheral Map Register */
+#define             MDMA_D1_CURR_X_COUNT  0xffc00fb0   /* Memory DMA Stream 1 Destination Current X Count Register */
+#define             MDMA_D1_CURR_Y_COUNT  0xffc00fb8   /* Memory DMA Stream 1 Destination Current Y Count Register */
+#define            MDMA_S1_NEXT_DESC_PTR  0xffc00fc0   /* Memory DMA Stream 1 Source Next Descriptor Pointer Register */
+#define               MDMA_S1_START_ADDR  0xffc00fc4   /* Memory DMA Stream 1 Source Start Address Register */
+#define                   MDMA_S1_CONFIG  0xffc00fc8   /* Memory DMA Stream 1 Source Configuration Register */
+#define                  MDMA_S1_X_COUNT  0xffc00fd0   /* Memory DMA Stream 1 Source X Count Register */
+#define                 MDMA_S1_X_MODIFY  0xffc00fd4   /* Memory DMA Stream 1 Source X Modify Register */
+#define                  MDMA_S1_Y_COUNT  0xffc00fd8   /* Memory DMA Stream 1 Source Y Count Register */
+#define                 MDMA_S1_Y_MODIFY  0xffc00fdc   /* Memory DMA Stream 1 Source Y Modify Register */
+#define            MDMA_S1_CURR_DESC_PTR  0xffc00fe0   /* Memory DMA Stream 1 Source Current Descriptor Pointer Register */
+#define                MDMA_S1_CURR_ADDR  0xffc00fe4   /* Memory DMA Stream 1 Source Current Address Register */
+#define               MDMA_S1_IRQ_STATUS  0xffc00fe8   /* Memory DMA Stream 1 Source Interrupt/Status Register */
+#define           MDMA_S1_PERIPHERAL_MAP  0xffc00fec   /* Memory DMA Stream 1 Source Peripheral Map Register */
+#define             MDMA_S1_CURR_X_COUNT  0xffc00ff0   /* Memory DMA Stream 1 Source Current X Count Register */
+#define             MDMA_S1_CURR_Y_COUNT  0xffc00ff8   /* Memory DMA Stream 1 Source Current Y Count Register */
+
+/* UART3 Registers */
+
+#define                        UART3_DLL  0xffc03100   /* Divisor Latch Low Byte */
+#define                        UART3_DLH  0xffc03104   /* Divisor Latch High Byte */
+#define                       UART3_GCTL  0xffc03108   /* Global Control Register */
+#define                        UART3_LCR  0xffc0310c   /* Line Control Register */
+#define                        UART3_MCR  0xffc03110   /* Modem Control Register */
+#define                        UART3_LSR  0xffc03114   /* Line Status Register */
+#define                        UART3_MSR  0xffc03118   /* Modem Status Register */
+#define                        UART3_SCR  0xffc0311c   /* Scratch Register */
+#define                    UART3_IER_SET  0xffc03120   /* Interrupt Enable Register Set */
+#define                  UART3_IER_CLEAR  0xffc03124   /* Interrupt Enable Register Clear */
+#define                        UART3_THR  0xffc03128   /* Transmit Hold Register */
+#define                        UART3_RBR  0xffc0312c   /* Receive Buffer Register */
+
+/* EPPI1 Registers */
+
+#define                     EPPI1_STATUS  0xffc01300   /* EPPI1 Status Register */
+#define                     EPPI1_HCOUNT  0xffc01304   /* EPPI1 Horizontal Transfer Count Register */
+#define                     EPPI1_HDELAY  0xffc01308   /* EPPI1 Horizontal Delay Count Register */
+#define                     EPPI1_VCOUNT  0xffc0130c   /* EPPI1 Vertical Transfer Count Register */
+#define                     EPPI1_VDELAY  0xffc01310   /* EPPI1 Vertical Delay Count Register */
+#define                      EPPI1_FRAME  0xffc01314   /* EPPI1 Lines per Frame Register */
+#define                       EPPI1_LINE  0xffc01318   /* EPPI1 Samples per Line Register */
+#define                     EPPI1_CLKDIV  0xffc0131c   /* EPPI1 Clock Divide Register */
+#define                    EPPI1_CONTROL  0xffc01320   /* EPPI1 Control Register */
+#define                   EPPI1_FS1W_HBL  0xffc01324   /* EPPI1 FS1 Width Register / EPPI1 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI1_FS1P_AVPL  0xffc01328   /* EPPI1 FS1 Period Register / EPPI1 Active Video Samples Per Line Register */
+#define                   EPPI1_FS2W_LVB  0xffc0132c   /* EPPI1 FS2 Width Register / EPPI1 Lines of Vertical Blanking Register */
+#define                  EPPI1_FS2P_LAVF  0xffc01330   /* EPPI1 FS2 Period Register/ EPPI1 Lines of Active Video Per Field Register */
+#define                       EPPI1_CLIP  0xffc01334   /* EPPI1 Clipping Register */
+
+/* Port Interrupt 0 Registers (32-bit) */
+
+#define                   PINT0_MASK_SET  0xffc01400   /* Pin Interrupt 0 Mask Set Register */
+#define                 PINT0_MASK_CLEAR  0xffc01404   /* Pin Interrupt 0 Mask Clear Register */
+#define                    PINT0_REQUEST  0xffc01408   /* Pin Interrupt 0 Interrupt Request Register */
+#define                     PINT0_ASSIGN  0xffc0140c   /* Pin Interrupt 0 Port Assign Register */
+#define                   PINT0_EDGE_SET  0xffc01410   /* Pin Interrupt 0 Edge-sensitivity Set Register */
+#define                 PINT0_EDGE_CLEAR  0xffc01414   /* Pin Interrupt 0 Edge-sensitivity Clear Register */
+#define                 PINT0_INVERT_SET  0xffc01418   /* Pin Interrupt 0 Inversion Set Register */
+#define               PINT0_INVERT_CLEAR  0xffc0141c   /* Pin Interrupt 0 Inversion Clear Register */
+#define                   PINT0_PINSTATE  0xffc01420   /* Pin Interrupt 0 Pin Status Register */
+#define                      PINT0_LATCH  0xffc01424   /* Pin Interrupt 0 Latch Register */
+
+/* Port Interrupt 1 Registers (32-bit) */
+
+#define                   PINT1_MASK_SET  0xffc01430   /* Pin Interrupt 1 Mask Set Register */
+#define                 PINT1_MASK_CLEAR  0xffc01434   /* Pin Interrupt 1 Mask Clear Register */
+#define                    PINT1_REQUEST  0xffc01438   /* Pin Interrupt 1 Interrupt Request Register */
+#define                     PINT1_ASSIGN  0xffc0143c   /* Pin Interrupt 1 Port Assign Register */
+#define                   PINT1_EDGE_SET  0xffc01440   /* Pin Interrupt 1 Edge-sensitivity Set Register */
+#define                 PINT1_EDGE_CLEAR  0xffc01444   /* Pin Interrupt 1 Edge-sensitivity Clear Register */
+#define                 PINT1_INVERT_SET  0xffc01448   /* Pin Interrupt 1 Inversion Set Register */
+#define               PINT1_INVERT_CLEAR  0xffc0144c   /* Pin Interrupt 1 Inversion Clear Register */
+#define                   PINT1_PINSTATE  0xffc01450   /* Pin Interrupt 1 Pin Status Register */
+#define                      PINT1_LATCH  0xffc01454   /* Pin Interrupt 1 Latch Register */
+
+/* Port Interrupt 2 Registers (32-bit) */
+
+#define                   PINT2_MASK_SET  0xffc01460   /* Pin Interrupt 2 Mask Set Register */
+#define                 PINT2_MASK_CLEAR  0xffc01464   /* Pin Interrupt 2 Mask Clear Register */
+#define                    PINT2_REQUEST  0xffc01468   /* Pin Interrupt 2 Interrupt Request Register */
+#define                     PINT2_ASSIGN  0xffc0146c   /* Pin Interrupt 2 Port Assign Register */
+#define                   PINT2_EDGE_SET  0xffc01470   /* Pin Interrupt 2 Edge-sensitivity Set Register */
+#define                 PINT2_EDGE_CLEAR  0xffc01474   /* Pin Interrupt 2 Edge-sensitivity Clear Register */
+#define                 PINT2_INVERT_SET  0xffc01478   /* Pin Interrupt 2 Inversion Set Register */
+#define               PINT2_INVERT_CLEAR  0xffc0147c   /* Pin Interrupt 2 Inversion Clear Register */
+#define                   PINT2_PINSTATE  0xffc01480   /* Pin Interrupt 2 Pin Status Register */
+#define                      PINT2_LATCH  0xffc01484   /* Pin Interrupt 2 Latch Register */
+
+/* Port Interrupt 3 Registers (32-bit) */
+
+#define                   PINT3_MASK_SET  0xffc01490   /* Pin Interrupt 3 Mask Set Register */
+#define                 PINT3_MASK_CLEAR  0xffc01494   /* Pin Interrupt 3 Mask Clear Register */
+#define                    PINT3_REQUEST  0xffc01498   /* Pin Interrupt 3 Interrupt Request Register */
+#define                     PINT3_ASSIGN  0xffc0149c   /* Pin Interrupt 3 Port Assign Register */
+#define                   PINT3_EDGE_SET  0xffc014a0   /* Pin Interrupt 3 Edge-sensitivity Set Register */
+#define                 PINT3_EDGE_CLEAR  0xffc014a4   /* Pin Interrupt 3 Edge-sensitivity Clear Register */
+#define                 PINT3_INVERT_SET  0xffc014a8   /* Pin Interrupt 3 Inversion Set Register */
+#define               PINT3_INVERT_CLEAR  0xffc014ac   /* Pin Interrupt 3 Inversion Clear Register */
+#define                   PINT3_PINSTATE  0xffc014b0   /* Pin Interrupt 3 Pin Status Register */
+#define                      PINT3_LATCH  0xffc014b4   /* Pin Interrupt 3 Latch Register */
+
+/* Port A Registers */
+
+#define                        PORTA_FER  0xffc014c0   /* Function Enable Register */
+#define                            PORTA  0xffc014c4   /* GPIO Data Register */
+#define                        PORTA_SET  0xffc014c8   /* GPIO Data Set Register */
+#define                      PORTA_CLEAR  0xffc014cc   /* GPIO Data Clear Register */
+#define                    PORTA_DIR_SET  0xffc014d0   /* GPIO Direction Set Register */
+#define                  PORTA_DIR_CLEAR  0xffc014d4   /* GPIO Direction Clear Register */
+#define                       PORTA_INEN  0xffc014d8   /* GPIO Input Enable Register */
+#define                        PORTA_MUX  0xffc014dc   /* Multiplexer Control Register */
+
+/* Port B Registers */
+
+#define                        PORTB_FER  0xffc014e0   /* Function Enable Register */
+#define                            PORTB  0xffc014e4   /* GPIO Data Register */
+#define                        PORTB_SET  0xffc014e8   /* GPIO Data Set Register */
+#define                      PORTB_CLEAR  0xffc014ec   /* GPIO Data Clear Register */
+#define                    PORTB_DIR_SET  0xffc014f0   /* GPIO Direction Set Register */
+#define                  PORTB_DIR_CLEAR  0xffc014f4   /* GPIO Direction Clear Register */
+#define                       PORTB_INEN  0xffc014f8   /* GPIO Input Enable Register */
+#define                        PORTB_MUX  0xffc014fc   /* Multiplexer Control Register */
+
+/* Port C Registers */
+
+#define                        PORTC_FER  0xffc01500   /* Function Enable Register */
+#define                            PORTC  0xffc01504   /* GPIO Data Register */
+#define                        PORTC_SET  0xffc01508   /* GPIO Data Set Register */
+#define                      PORTC_CLEAR  0xffc0150c   /* GPIO Data Clear Register */
+#define                    PORTC_DIR_SET  0xffc01510   /* GPIO Direction Set Register */
+#define                  PORTC_DIR_CLEAR  0xffc01514   /* GPIO Direction Clear Register */
+#define                       PORTC_INEN  0xffc01518   /* GPIO Input Enable Register */
+#define                        PORTC_MUX  0xffc0151c   /* Multiplexer Control Register */
+
+/* Port D Registers */
+
+#define                        PORTD_FER  0xffc01520   /* Function Enable Register */
+#define                            PORTD  0xffc01524   /* GPIO Data Register */
+#define                        PORTD_SET  0xffc01528   /* GPIO Data Set Register */
+#define                      PORTD_CLEAR  0xffc0152c   /* GPIO Data Clear Register */
+#define                    PORTD_DIR_SET  0xffc01530   /* GPIO Direction Set Register */
+#define                  PORTD_DIR_CLEAR  0xffc01534   /* GPIO Direction Clear Register */
+#define                       PORTD_INEN  0xffc01538   /* GPIO Input Enable Register */
+#define                        PORTD_MUX  0xffc0153c   /* Multiplexer Control Register */
+
+/* Port E Registers */
+
+#define                        PORTE_FER  0xffc01540   /* Function Enable Register */
+#define                            PORTE  0xffc01544   /* GPIO Data Register */
+#define                        PORTE_SET  0xffc01548   /* GPIO Data Set Register */
+#define                      PORTE_CLEAR  0xffc0154c   /* GPIO Data Clear Register */
+#define                    PORTE_DIR_SET  0xffc01550   /* GPIO Direction Set Register */
+#define                  PORTE_DIR_CLEAR  0xffc01554   /* GPIO Direction Clear Register */
+#define                       PORTE_INEN  0xffc01558   /* GPIO Input Enable Register */
+#define                        PORTE_MUX  0xffc0155c   /* Multiplexer Control Register */
+
+/* Port F Registers */
+
+#define                        PORTF_FER  0xffc01560   /* Function Enable Register */
+#define                            PORTF  0xffc01564   /* GPIO Data Register */
+#define                        PORTF_SET  0xffc01568   /* GPIO Data Set Register */
+#define                      PORTF_CLEAR  0xffc0156c   /* GPIO Data Clear Register */
+#define                    PORTF_DIR_SET  0xffc01570   /* GPIO Direction Set Register */
+#define                  PORTF_DIR_CLEAR  0xffc01574   /* GPIO Direction Clear Register */
+#define                       PORTF_INEN  0xffc01578   /* GPIO Input Enable Register */
+#define                        PORTF_MUX  0xffc0157c   /* Multiplexer Control Register */
+
+/* Port G Registers */
+
+#define                        PORTG_FER  0xffc01580   /* Function Enable Register */
+#define                            PORTG  0xffc01584   /* GPIO Data Register */
+#define                        PORTG_SET  0xffc01588   /* GPIO Data Set Register */
+#define                      PORTG_CLEAR  0xffc0158c   /* GPIO Data Clear Register */
+#define                    PORTG_DIR_SET  0xffc01590   /* GPIO Direction Set Register */
+#define                  PORTG_DIR_CLEAR  0xffc01594   /* GPIO Direction Clear Register */
+#define                       PORTG_INEN  0xffc01598   /* GPIO Input Enable Register */
+#define                        PORTG_MUX  0xffc0159c   /* Multiplexer Control Register */
+
+/* Port H Registers */
+
+#define                        PORTH_FER  0xffc015a0   /* Function Enable Register */
+#define                            PORTH  0xffc015a4   /* GPIO Data Register */
+#define                        PORTH_SET  0xffc015a8   /* GPIO Data Set Register */
+#define                      PORTH_CLEAR  0xffc015ac   /* GPIO Data Clear Register */
+#define                    PORTH_DIR_SET  0xffc015b0   /* GPIO Direction Set Register */
+#define                  PORTH_DIR_CLEAR  0xffc015b4   /* GPIO Direction Clear Register */
+#define                       PORTH_INEN  0xffc015b8   /* GPIO Input Enable Register */
+#define                        PORTH_MUX  0xffc015bc   /* Multiplexer Control Register */
+
+/* Port I Registers */
+
+#define                        PORTI_FER  0xffc015c0   /* Function Enable Register */
+#define                            PORTI  0xffc015c4   /* GPIO Data Register */
+#define                        PORTI_SET  0xffc015c8   /* GPIO Data Set Register */
+#define                      PORTI_CLEAR  0xffc015cc   /* GPIO Data Clear Register */
+#define                    PORTI_DIR_SET  0xffc015d0   /* GPIO Direction Set Register */
+#define                  PORTI_DIR_CLEAR  0xffc015d4   /* GPIO Direction Clear Register */
+#define                       PORTI_INEN  0xffc015d8   /* GPIO Input Enable Register */
+#define                        PORTI_MUX  0xffc015dc   /* Multiplexer Control Register */
+
+/* Port J Registers */
+
+#define                        PORTJ_FER  0xffc015e0   /* Function Enable Register */
+#define                            PORTJ  0xffc015e4   /* GPIO Data Register */
+#define                        PORTJ_SET  0xffc015e8   /* GPIO Data Set Register */
+#define                      PORTJ_CLEAR  0xffc015ec   /* GPIO Data Clear Register */
+#define                    PORTJ_DIR_SET  0xffc015f0   /* GPIO Direction Set Register */
+#define                  PORTJ_DIR_CLEAR  0xffc015f4   /* GPIO Direction Clear Register */
+#define                       PORTJ_INEN  0xffc015f8   /* GPIO Input Enable Register */
+#define                        PORTJ_MUX  0xffc015fc   /* Multiplexer Control Register */
+
+/* PWM Timer Registers */
+
+#define                    TIMER0_CONFIG  0xffc01600   /* Timer 0 Configuration Register */
+#define                   TIMER0_COUNTER  0xffc01604   /* Timer 0 Counter Register */
+#define                    TIMER0_PERIOD  0xffc01608   /* Timer 0 Period Register */
+#define                     TIMER0_WIDTH  0xffc0160c   /* Timer 0 Width Register */
+#define                    TIMER1_CONFIG  0xffc01610   /* Timer 1 Configuration Register */
+#define                   TIMER1_COUNTER  0xffc01614   /* Timer 1 Counter Register */
+#define                    TIMER1_PERIOD  0xffc01618   /* Timer 1 Period Register */
+#define                     TIMER1_WIDTH  0xffc0161c   /* Timer 1 Width Register */
+#define                    TIMER2_CONFIG  0xffc01620   /* Timer 2 Configuration Register */
+#define                   TIMER2_COUNTER  0xffc01624   /* Timer 2 Counter Register */
+#define                    TIMER2_PERIOD  0xffc01628   /* Timer 2 Period Register */
+#define                     TIMER2_WIDTH  0xffc0162c   /* Timer 2 Width Register */
+#define                    TIMER3_CONFIG  0xffc01630   /* Timer 3 Configuration Register */
+#define                   TIMER3_COUNTER  0xffc01634   /* Timer 3 Counter Register */
+#define                    TIMER3_PERIOD  0xffc01638   /* Timer 3 Period Register */
+#define                     TIMER3_WIDTH  0xffc0163c   /* Timer 3 Width Register */
+#define                    TIMER4_CONFIG  0xffc01640   /* Timer 4 Configuration Register */
+#define                   TIMER4_COUNTER  0xffc01644   /* Timer 4 Counter Register */
+#define                    TIMER4_PERIOD  0xffc01648   /* Timer 4 Period Register */
+#define                     TIMER4_WIDTH  0xffc0164c   /* Timer 4 Width Register */
+#define                    TIMER5_CONFIG  0xffc01650   /* Timer 5 Configuration Register */
+#define                   TIMER5_COUNTER  0xffc01654   /* Timer 5 Counter Register */
+#define                    TIMER5_PERIOD  0xffc01658   /* Timer 5 Period Register */
+#define                     TIMER5_WIDTH  0xffc0165c   /* Timer 5 Width Register */
+#define                    TIMER6_CONFIG  0xffc01660   /* Timer 6 Configuration Register */
+#define                   TIMER6_COUNTER  0xffc01664   /* Timer 6 Counter Register */
+#define                    TIMER6_PERIOD  0xffc01668   /* Timer 6 Period Register */
+#define                     TIMER6_WIDTH  0xffc0166c   /* Timer 6 Width Register */
+#define                    TIMER7_CONFIG  0xffc01670   /* Timer 7 Configuration Register */
+#define                   TIMER7_COUNTER  0xffc01674   /* Timer 7 Counter Register */
+#define                    TIMER7_PERIOD  0xffc01678   /* Timer 7 Period Register */
+#define                     TIMER7_WIDTH  0xffc0167c   /* Timer 7 Width Register */
+
+/* Timer Group of 8 */
+
+#define                    TIMER_ENABLE0  0xffc01680   /* Timer Group of 8 Enable Register */
+#define                   TIMER_DISABLE0  0xffc01684   /* Timer Group of 8 Disable Register */
+#define                    TIMER_STATUS0  0xffc01688   /* Timer Group of 8 Status Register */
+
+/* DMAC1 Registers */
+
+#define                      DMAC1_TCPER  0xffc01b0c   /* DMA Controller 1 Traffic Control Periods Register */
+#define                      DMAC1_TCCNT  0xffc01b10   /* DMA Controller 1 Current Counts Register */
+
+/* DMA Channel 12 Registers */
+
+#define              DMA12_NEXT_DESC_PTR  0xffc01c00   /* DMA Channel 12 Next Descriptor Pointer Register */
+#define                 DMA12_START_ADDR  0xffc01c04   /* DMA Channel 12 Start Address Register */
+#define                     DMA12_CONFIG  0xffc01c08   /* DMA Channel 12 Configuration Register */
+#define                    DMA12_X_COUNT  0xffc01c10   /* DMA Channel 12 X Count Register */
+#define                   DMA12_X_MODIFY  0xffc01c14   /* DMA Channel 12 X Modify Register */
+#define                    DMA12_Y_COUNT  0xffc01c18   /* DMA Channel 12 Y Count Register */
+#define                   DMA12_Y_MODIFY  0xffc01c1c   /* DMA Channel 12 Y Modify Register */
+#define              DMA12_CURR_DESC_PTR  0xffc01c20   /* DMA Channel 12 Current Descriptor Pointer Register */
+#define                  DMA12_CURR_ADDR  0xffc01c24   /* DMA Channel 12 Current Address Register */
+#define                 DMA12_IRQ_STATUS  0xffc01c28   /* DMA Channel 12 Interrupt/Status Register */
+#define             DMA12_PERIPHERAL_MAP  0xffc01c2c   /* DMA Channel 12 Peripheral Map Register */
+#define               DMA12_CURR_X_COUNT  0xffc01c30   /* DMA Channel 12 Current X Count Register */
+#define               DMA12_CURR_Y_COUNT  0xffc01c38   /* DMA Channel 12 Current Y Count Register */
+
+/* DMA Channel 13 Registers */
+
+#define              DMA13_NEXT_DESC_PTR  0xffc01c40   /* DMA Channel 13 Next Descriptor Pointer Register */
+#define                 DMA13_START_ADDR  0xffc01c44   /* DMA Channel 13 Start Address Register */
+#define                     DMA13_CONFIG  0xffc01c48   /* DMA Channel 13 Configuration Register */
+#define                    DMA13_X_COUNT  0xffc01c50   /* DMA Channel 13 X Count Register */
+#define                   DMA13_X_MODIFY  0xffc01c54   /* DMA Channel 13 X Modify Register */
+#define                    DMA13_Y_COUNT  0xffc01c58   /* DMA Channel 13 Y Count Register */
+#define                   DMA13_Y_MODIFY  0xffc01c5c   /* DMA Channel 13 Y Modify Register */
+#define              DMA13_CURR_DESC_PTR  0xffc01c60   /* DMA Channel 13 Current Descriptor Pointer Register */
+#define                  DMA13_CURR_ADDR  0xffc01c64   /* DMA Channel 13 Current Address Register */
+#define                 DMA13_IRQ_STATUS  0xffc01c68   /* DMA Channel 13 Interrupt/Status Register */
+#define             DMA13_PERIPHERAL_MAP  0xffc01c6c   /* DMA Channel 13 Peripheral Map Register */
+#define               DMA13_CURR_X_COUNT  0xffc01c70   /* DMA Channel 13 Current X Count Register */
+#define               DMA13_CURR_Y_COUNT  0xffc01c78   /* DMA Channel 13 Current Y Count Register */
+
+/* DMA Channel 14 Registers */
+
+#define              DMA14_NEXT_DESC_PTR  0xffc01c80   /* DMA Channel 14 Next Descriptor Pointer Register */
+#define                 DMA14_START_ADDR  0xffc01c84   /* DMA Channel 14 Start Address Register */
+#define                     DMA14_CONFIG  0xffc01c88   /* DMA Channel 14 Configuration Register */
+#define                    DMA14_X_COUNT  0xffc01c90   /* DMA Channel 14 X Count Register */
+#define                   DMA14_X_MODIFY  0xffc01c94   /* DMA Channel 14 X Modify Register */
+#define                    DMA14_Y_COUNT  0xffc01c98   /* DMA Channel 14 Y Count Register */
+#define                   DMA14_Y_MODIFY  0xffc01c9c   /* DMA Channel 14 Y Modify Register */
+#define              DMA14_CURR_DESC_PTR  0xffc01ca0   /* DMA Channel 14 Current Descriptor Pointer Register */
+#define                  DMA14_CURR_ADDR  0xffc01ca4   /* DMA Channel 14 Current Address Register */
+#define                 DMA14_IRQ_STATUS  0xffc01ca8   /* DMA Channel 14 Interrupt/Status Register */
+#define             DMA14_PERIPHERAL_MAP  0xffc01cac   /* DMA Channel 14 Peripheral Map Register */
+#define               DMA14_CURR_X_COUNT  0xffc01cb0   /* DMA Channel 14 Current X Count Register */
+#define               DMA14_CURR_Y_COUNT  0xffc01cb8   /* DMA Channel 14 Current Y Count Register */
+
+/* DMA Channel 15 Registers */
+
+#define              DMA15_NEXT_DESC_PTR  0xffc01cc0   /* DMA Channel 15 Next Descriptor Pointer Register */
+#define                 DMA15_START_ADDR  0xffc01cc4   /* DMA Channel 15 Start Address Register */
+#define                     DMA15_CONFIG  0xffc01cc8   /* DMA Channel 15 Configuration Register */
+#define                    DMA15_X_COUNT  0xffc01cd0   /* DMA Channel 15 X Count Register */
+#define                   DMA15_X_MODIFY  0xffc01cd4   /* DMA Channel 15 X Modify Register */
+#define                    DMA15_Y_COUNT  0xffc01cd8   /* DMA Channel 15 Y Count Register */
+#define                   DMA15_Y_MODIFY  0xffc01cdc   /* DMA Channel 15 Y Modify Register */
+#define              DMA15_CURR_DESC_PTR  0xffc01ce0   /* DMA Channel 15 Current Descriptor Pointer Register */
+#define                  DMA15_CURR_ADDR  0xffc01ce4   /* DMA Channel 15 Current Address Register */
+#define                 DMA15_IRQ_STATUS  0xffc01ce8   /* DMA Channel 15 Interrupt/Status Register */
+#define             DMA15_PERIPHERAL_MAP  0xffc01cec   /* DMA Channel 15 Peripheral Map Register */
+#define               DMA15_CURR_X_COUNT  0xffc01cf0   /* DMA Channel 15 Current X Count Register */
+#define               DMA15_CURR_Y_COUNT  0xffc01cf8   /* DMA Channel 15 Current Y Count Register */
+
+/* DMA Channel 16 Registers */
+
+#define              DMA16_NEXT_DESC_PTR  0xffc01d00   /* DMA Channel 16 Next Descriptor Pointer Register */
+#define                 DMA16_START_ADDR  0xffc01d04   /* DMA Channel 16 Start Address Register */
+#define                     DMA16_CONFIG  0xffc01d08   /* DMA Channel 16 Configuration Register */
+#define                    DMA16_X_COUNT  0xffc01d10   /* DMA Channel 16 X Count Register */
+#define                   DMA16_X_MODIFY  0xffc01d14   /* DMA Channel 16 X Modify Register */
+#define                    DMA16_Y_COUNT  0xffc01d18   /* DMA Channel 16 Y Count Register */
+#define                   DMA16_Y_MODIFY  0xffc01d1c   /* DMA Channel 16 Y Modify Register */
+#define              DMA16_CURR_DESC_PTR  0xffc01d20   /* DMA Channel 16 Current Descriptor Pointer Register */
+#define                  DMA16_CURR_ADDR  0xffc01d24   /* DMA Channel 16 Current Address Register */
+#define                 DMA16_IRQ_STATUS  0xffc01d28   /* DMA Channel 16 Interrupt/Status Register */
+#define             DMA16_PERIPHERAL_MAP  0xffc01d2c   /* DMA Channel 16 Peripheral Map Register */
+#define               DMA16_CURR_X_COUNT  0xffc01d30   /* DMA Channel 16 Current X Count Register */
+#define               DMA16_CURR_Y_COUNT  0xffc01d38   /* DMA Channel 16 Current Y Count Register */
+
+/* DMA Channel 17 Registers */
+
+#define              DMA17_NEXT_DESC_PTR  0xffc01d40   /* DMA Channel 17 Next Descriptor Pointer Register */
+#define                 DMA17_START_ADDR  0xffc01d44   /* DMA Channel 17 Start Address Register */
+#define                     DMA17_CONFIG  0xffc01d48   /* DMA Channel 17 Configuration Register */
+#define                    DMA17_X_COUNT  0xffc01d50   /* DMA Channel 17 X Count Register */
+#define                   DMA17_X_MODIFY  0xffc01d54   /* DMA Channel 17 X Modify Register */
+#define                    DMA17_Y_COUNT  0xffc01d58   /* DMA Channel 17 Y Count Register */
+#define                   DMA17_Y_MODIFY  0xffc01d5c   /* DMA Channel 17 Y Modify Register */
+#define              DMA17_CURR_DESC_PTR  0xffc01d60   /* DMA Channel 17 Current Descriptor Pointer Register */
+#define                  DMA17_CURR_ADDR  0xffc01d64   /* DMA Channel 17 Current Address Register */
+#define                 DMA17_IRQ_STATUS  0xffc01d68   /* DMA Channel 17 Interrupt/Status Register */
+#define             DMA17_PERIPHERAL_MAP  0xffc01d6c   /* DMA Channel 17 Peripheral Map Register */
+#define               DMA17_CURR_X_COUNT  0xffc01d70   /* DMA Channel 17 Current X Count Register */
+#define               DMA17_CURR_Y_COUNT  0xffc01d78   /* DMA Channel 17 Current Y Count Register */
+
+/* DMA Channel 18 Registers */
+
+#define              DMA18_NEXT_DESC_PTR  0xffc01d80   /* DMA Channel 18 Next Descriptor Pointer Register */
+#define                 DMA18_START_ADDR  0xffc01d84   /* DMA Channel 18 Start Address Register */
+#define                     DMA18_CONFIG  0xffc01d88   /* DMA Channel 18 Configuration Register */
+#define                    DMA18_X_COUNT  0xffc01d90   /* DMA Channel 18 X Count Register */
+#define                   DMA18_X_MODIFY  0xffc01d94   /* DMA Channel 18 X Modify Register */
+#define                    DMA18_Y_COUNT  0xffc01d98   /* DMA Channel 18 Y Count Register */
+#define                   DMA18_Y_MODIFY  0xffc01d9c   /* DMA Channel 18 Y Modify Register */
+#define              DMA18_CURR_DESC_PTR  0xffc01da0   /* DMA Channel 18 Current Descriptor Pointer Register */
+#define                  DMA18_CURR_ADDR  0xffc01da4   /* DMA Channel 18 Current Address Register */
+#define                 DMA18_IRQ_STATUS  0xffc01da8   /* DMA Channel 18 Interrupt/Status Register */
+#define             DMA18_PERIPHERAL_MAP  0xffc01dac   /* DMA Channel 18 Peripheral Map Register */
+#define               DMA18_CURR_X_COUNT  0xffc01db0   /* DMA Channel 18 Current X Count Register */
+#define               DMA18_CURR_Y_COUNT  0xffc01db8   /* DMA Channel 18 Current Y Count Register */
+
+/* DMA Channel 19 Registers */
+
+#define              DMA19_NEXT_DESC_PTR  0xffc01dc0   /* DMA Channel 19 Next Descriptor Pointer Register */
+#define                 DMA19_START_ADDR  0xffc01dc4   /* DMA Channel 19 Start Address Register */
+#define                     DMA19_CONFIG  0xffc01dc8   /* DMA Channel 19 Configuration Register */
+#define                    DMA19_X_COUNT  0xffc01dd0   /* DMA Channel 19 X Count Register */
+#define                   DMA19_X_MODIFY  0xffc01dd4   /* DMA Channel 19 X Modify Register */
+#define                    DMA19_Y_COUNT  0xffc01dd8   /* DMA Channel 19 Y Count Register */
+#define                   DMA19_Y_MODIFY  0xffc01ddc   /* DMA Channel 19 Y Modify Register */
+#define              DMA19_CURR_DESC_PTR  0xffc01de0   /* DMA Channel 19 Current Descriptor Pointer Register */
+#define                  DMA19_CURR_ADDR  0xffc01de4   /* DMA Channel 19 Current Address Register */
+#define                 DMA19_IRQ_STATUS  0xffc01de8   /* DMA Channel 19 Interrupt/Status Register */
+#define             DMA19_PERIPHERAL_MAP  0xffc01dec   /* DMA Channel 19 Peripheral Map Register */
+#define               DMA19_CURR_X_COUNT  0xffc01df0   /* DMA Channel 19 Current X Count Register */
+#define               DMA19_CURR_Y_COUNT  0xffc01df8   /* DMA Channel 19 Current Y Count Register */
+
+/* DMA Channel 20 Registers */
+
+#define              DMA20_NEXT_DESC_PTR  0xffc01e00   /* DMA Channel 20 Next Descriptor Pointer Register */
+#define                 DMA20_START_ADDR  0xffc01e04   /* DMA Channel 20 Start Address Register */
+#define                     DMA20_CONFIG  0xffc01e08   /* DMA Channel 20 Configuration Register */
+#define                    DMA20_X_COUNT  0xffc01e10   /* DMA Channel 20 X Count Register */
+#define                   DMA20_X_MODIFY  0xffc01e14   /* DMA Channel 20 X Modify Register */
+#define                    DMA20_Y_COUNT  0xffc01e18   /* DMA Channel 20 Y Count Register */
+#define                   DMA20_Y_MODIFY  0xffc01e1c   /* DMA Channel 20 Y Modify Register */
+#define              DMA20_CURR_DESC_PTR  0xffc01e20   /* DMA Channel 20 Current Descriptor Pointer Register */
+#define                  DMA20_CURR_ADDR  0xffc01e24   /* DMA Channel 20 Current Address Register */
+#define                 DMA20_IRQ_STATUS  0xffc01e28   /* DMA Channel 20 Interrupt/Status Register */
+#define             DMA20_PERIPHERAL_MAP  0xffc01e2c   /* DMA Channel 20 Peripheral Map Register */
+#define               DMA20_CURR_X_COUNT  0xffc01e30   /* DMA Channel 20 Current X Count Register */
+#define               DMA20_CURR_Y_COUNT  0xffc01e38   /* DMA Channel 20 Current Y Count Register */
+
+/* DMA Channel 21 Registers */
+
+#define              DMA21_NEXT_DESC_PTR  0xffc01e40   /* DMA Channel 21 Next Descriptor Pointer Register */
+#define                 DMA21_START_ADDR  0xffc01e44   /* DMA Channel 21 Start Address Register */
+#define                     DMA21_CONFIG  0xffc01e48   /* DMA Channel 21 Configuration Register */
+#define                    DMA21_X_COUNT  0xffc01e50   /* DMA Channel 21 X Count Register */
+#define                   DMA21_X_MODIFY  0xffc01e54   /* DMA Channel 21 X Modify Register */
+#define                    DMA21_Y_COUNT  0xffc01e58   /* DMA Channel 21 Y Count Register */
+#define                   DMA21_Y_MODIFY  0xffc01e5c   /* DMA Channel 21 Y Modify Register */
+#define              DMA21_CURR_DESC_PTR  0xffc01e60   /* DMA Channel 21 Current Descriptor Pointer Register */
+#define                  DMA21_CURR_ADDR  0xffc01e64   /* DMA Channel 21 Current Address Register */
+#define                 DMA21_IRQ_STATUS  0xffc01e68   /* DMA Channel 21 Interrupt/Status Register */
+#define             DMA21_PERIPHERAL_MAP  0xffc01e6c   /* DMA Channel 21 Peripheral Map Register */
+#define               DMA21_CURR_X_COUNT  0xffc01e70   /* DMA Channel 21 Current X Count Register */
+#define               DMA21_CURR_Y_COUNT  0xffc01e78   /* DMA Channel 21 Current Y Count Register */
+
+/* DMA Channel 22 Registers */
+
+#define              DMA22_NEXT_DESC_PTR  0xffc01e80   /* DMA Channel 22 Next Descriptor Pointer Register */
+#define                 DMA22_START_ADDR  0xffc01e84   /* DMA Channel 22 Start Address Register */
+#define                     DMA22_CONFIG  0xffc01e88   /* DMA Channel 22 Configuration Register */
+#define                    DMA22_X_COUNT  0xffc01e90   /* DMA Channel 22 X Count Register */
+#define                   DMA22_X_MODIFY  0xffc01e94   /* DMA Channel 22 X Modify Register */
+#define                    DMA22_Y_COUNT  0xffc01e98   /* DMA Channel 22 Y Count Register */
+#define                   DMA22_Y_MODIFY  0xffc01e9c   /* DMA Channel 22 Y Modify Register */
+#define              DMA22_CURR_DESC_PTR  0xffc01ea0   /* DMA Channel 22 Current Descriptor Pointer Register */
+#define                  DMA22_CURR_ADDR  0xffc01ea4   /* DMA Channel 22 Current Address Register */
+#define                 DMA22_IRQ_STATUS  0xffc01ea8   /* DMA Channel 22 Interrupt/Status Register */
+#define             DMA22_PERIPHERAL_MAP  0xffc01eac   /* DMA Channel 22 Peripheral Map Register */
+#define               DMA22_CURR_X_COUNT  0xffc01eb0   /* DMA Channel 22 Current X Count Register */
+#define               DMA22_CURR_Y_COUNT  0xffc01eb8   /* DMA Channel 22 Current Y Count Register */
+
+/* DMA Channel 23 Registers */
+
+#define              DMA23_NEXT_DESC_PTR  0xffc01ec0   /* DMA Channel 23 Next Descriptor Pointer Register */
+#define                 DMA23_START_ADDR  0xffc01ec4   /* DMA Channel 23 Start Address Register */
+#define                     DMA23_CONFIG  0xffc01ec8   /* DMA Channel 23 Configuration Register */
+#define                    DMA23_X_COUNT  0xffc01ed0   /* DMA Channel 23 X Count Register */
+#define                   DMA23_X_MODIFY  0xffc01ed4   /* DMA Channel 23 X Modify Register */
+#define                    DMA23_Y_COUNT  0xffc01ed8   /* DMA Channel 23 Y Count Register */
+#define                   DMA23_Y_MODIFY  0xffc01edc   /* DMA Channel 23 Y Modify Register */
+#define              DMA23_CURR_DESC_PTR  0xffc01ee0   /* DMA Channel 23 Current Descriptor Pointer Register */
+#define                  DMA23_CURR_ADDR  0xffc01ee4   /* DMA Channel 23 Current Address Register */
+#define                 DMA23_IRQ_STATUS  0xffc01ee8   /* DMA Channel 23 Interrupt/Status Register */
+#define             DMA23_PERIPHERAL_MAP  0xffc01eec   /* DMA Channel 23 Peripheral Map Register */
+#define               DMA23_CURR_X_COUNT  0xffc01ef0   /* DMA Channel 23 Current X Count Register */
+#define               DMA23_CURR_Y_COUNT  0xffc01ef8   /* DMA Channel 23 Current Y Count Register */
+
+/* MDMA Stream 2 Registers */
+
+#define            MDMA_D2_NEXT_DESC_PTR  0xffc01f00   /* Memory DMA Stream 2 Destination Next Descriptor Pointer Register */
+#define               MDMA_D2_START_ADDR  0xffc01f04   /* Memory DMA Stream 2 Destination Start Address Register */
+#define                   MDMA_D2_CONFIG  0xffc01f08   /* Memory DMA Stream 2 Destination Configuration Register */
+#define                  MDMA_D2_X_COUNT  0xffc01f10   /* Memory DMA Stream 2 Destination X Count Register */
+#define                 MDMA_D2_X_MODIFY  0xffc01f14   /* Memory DMA Stream 2 Destination X Modify Register */
+#define                  MDMA_D2_Y_COUNT  0xffc01f18   /* Memory DMA Stream 2 Destination Y Count Register */
+#define                 MDMA_D2_Y_MODIFY  0xffc01f1c   /* Memory DMA Stream 2 Destination Y Modify Register */
+#define            MDMA_D2_CURR_DESC_PTR  0xffc01f20   /* Memory DMA Stream 2 Destination Current Descriptor Pointer Register */
+#define                MDMA_D2_CURR_ADDR  0xffc01f24   /* Memory DMA Stream 2 Destination Current Address Register */
+#define               MDMA_D2_IRQ_STATUS  0xffc01f28   /* Memory DMA Stream 2 Destination Interrupt/Status Register */
+#define           MDMA_D2_PERIPHERAL_MAP  0xffc01f2c   /* Memory DMA Stream 2 Destination Peripheral Map Register */
+#define             MDMA_D2_CURR_X_COUNT  0xffc01f30   /* Memory DMA Stream 2 Destination Current X Count Register */
+#define             MDMA_D2_CURR_Y_COUNT  0xffc01f38   /* Memory DMA Stream 2 Destination Current Y Count Register */
+#define            MDMA_S2_NEXT_DESC_PTR  0xffc01f40   /* Memory DMA Stream 2 Source Next Descriptor Pointer Register */
+#define               MDMA_S2_START_ADDR  0xffc01f44   /* Memory DMA Stream 2 Source Start Address Register */
+#define                   MDMA_S2_CONFIG  0xffc01f48   /* Memory DMA Stream 2 Source Configuration Register */
+#define                  MDMA_S2_X_COUNT  0xffc01f50   /* Memory DMA Stream 2 Source X Count Register */
+#define                 MDMA_S2_X_MODIFY  0xffc01f54   /* Memory DMA Stream 2 Source X Modify Register */
+#define                  MDMA_S2_Y_COUNT  0xffc01f58   /* Memory DMA Stream 2 Source Y Count Register */
+#define                 MDMA_S2_Y_MODIFY  0xffc01f5c   /* Memory DMA Stream 2 Source Y Modify Register */
+#define            MDMA_S2_CURR_DESC_PTR  0xffc01f60   /* Memory DMA Stream 2 Source Current Descriptor Pointer Register */
+#define                MDMA_S2_CURR_ADDR  0xffc01f64   /* Memory DMA Stream 2 Source Current Address Register */
+#define               MDMA_S2_IRQ_STATUS  0xffc01f68   /* Memory DMA Stream 2 Source Interrupt/Status Register */
+#define           MDMA_S2_PERIPHERAL_MAP  0xffc01f6c   /* Memory DMA Stream 2 Source Peripheral Map Register */
+#define             MDMA_S2_CURR_X_COUNT  0xffc01f70   /* Memory DMA Stream 2 Source Current X Count Register */
+#define             MDMA_S2_CURR_Y_COUNT  0xffc01f78   /* Memory DMA Stream 2 Source Current Y Count Register */
+
+/* MDMA Stream 3 Registers */
+
+#define            MDMA_D3_NEXT_DESC_PTR  0xffc01f80   /* Memory DMA Stream 3 Destination Next Descriptor Pointer Register */
+#define               MDMA_D3_START_ADDR  0xffc01f84   /* Memory DMA Stream 3 Destination Start Address Register */
+#define                   MDMA_D3_CONFIG  0xffc01f88   /* Memory DMA Stream 3 Destination Configuration Register */
+#define                  MDMA_D3_X_COUNT  0xffc01f90   /* Memory DMA Stream 3 Destination X Count Register */
+#define                 MDMA_D3_X_MODIFY  0xffc01f94   /* Memory DMA Stream 3 Destination X Modify Register */
+#define                  MDMA_D3_Y_COUNT  0xffc01f98   /* Memory DMA Stream 3 Destination Y Count Register */
+#define                 MDMA_D3_Y_MODIFY  0xffc01f9c   /* Memory DMA Stream 3 Destination Y Modify Register */
+#define            MDMA_D3_CURR_DESC_PTR  0xffc01fa0   /* Memory DMA Stream 3 Destination Current Descriptor Pointer Register */
+#define                MDMA_D3_CURR_ADDR  0xffc01fa4   /* Memory DMA Stream 3 Destination Current Address Register */
+#define               MDMA_D3_IRQ_STATUS  0xffc01fa8   /* Memory DMA Stream 3 Destination Interrupt/Status Register */
+#define           MDMA_D3_PERIPHERAL_MAP  0xffc01fac   /* Memory DMA Stream 3 Destination Peripheral Map Register */
+#define             MDMA_D3_CURR_X_COUNT  0xffc01fb0   /* Memory DMA Stream 3 Destination Current X Count Register */
+#define             MDMA_D3_CURR_Y_COUNT  0xffc01fb8   /* Memory DMA Stream 3 Destination Current Y Count Register */
+#define            MDMA_S3_NEXT_DESC_PTR  0xffc01fc0   /* Memory DMA Stream 3 Source Next Descriptor Pointer Register */
+#define               MDMA_S3_START_ADDR  0xffc01fc4   /* Memory DMA Stream 3 Source Start Address Register */
+#define                   MDMA_S3_CONFIG  0xffc01fc8   /* Memory DMA Stream 3 Source Configuration Register */
+#define                  MDMA_S3_X_COUNT  0xffc01fd0   /* Memory DMA Stream 3 Source X Count Register */
+#define                 MDMA_S3_X_MODIFY  0xffc01fd4   /* Memory DMA Stream 3 Source X Modify Register */
+#define                  MDMA_S3_Y_COUNT  0xffc01fd8   /* Memory DMA Stream 3 Source Y Count Register */
+#define                 MDMA_S3_Y_MODIFY  0xffc01fdc   /* Memory DMA Stream 3 Source Y Modify Register */
+#define            MDMA_S3_CURR_DESC_PTR  0xffc01fe0   /* Memory DMA Stream 3 Source Current Descriptor Pointer Register */
+#define                MDMA_S3_CURR_ADDR  0xffc01fe4   /* Memory DMA Stream 3 Source Current Address Register */
+#define               MDMA_S3_IRQ_STATUS  0xffc01fe8   /* Memory DMA Stream 3 Source Interrupt/Status Register */
+#define           MDMA_S3_PERIPHERAL_MAP  0xffc01fec   /* Memory DMA Stream 3 Source Peripheral Map Register */
+#define             MDMA_S3_CURR_X_COUNT  0xffc01ff0   /* Memory DMA Stream 3 Source Current X Count Register */
+#define             MDMA_S3_CURR_Y_COUNT  0xffc01ff8   /* Memory DMA Stream 3 Source Current Y Count Register */
+
+/* UART1 Registers */
+
+#define                        UART1_DLL  0xffc02000   /* Divisor Latch Low Byte */
+#define                        UART1_DLH  0xffc02004   /* Divisor Latch High Byte */
+#define                       UART1_GCTL  0xffc02008   /* Global Control Register */
+#define                        UART1_LCR  0xffc0200c   /* Line Control Register */
+#define                        UART1_MCR  0xffc02010   /* Modem Control Register */
+#define                        UART1_LSR  0xffc02014   /* Line Status Register */
+#define                        UART1_MSR  0xffc02018   /* Modem Status Register */
+#define                        UART1_SCR  0xffc0201c   /* Scratch Register */
+#define                    UART1_IER_SET  0xffc02020   /* Interrupt Enable Register Set */
+#define                  UART1_IER_CLEAR  0xffc02024   /* Interrupt Enable Register Clear */
+#define                        UART1_THR  0xffc02028   /* Transmit Hold Register */
+#define                        UART1_RBR  0xffc0202c   /* Receive Buffer Register */
+
+/* UART2 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 processors */
+
+/* SPI1 Registers */
+
+#define                     SPI1_REGBASE  0xffc02300
+#define                         SPI1_CTL  0xffc02300   /* SPI1 Control Register */
+#define                         SPI1_FLG  0xffc02304   /* SPI1 Flag Register */
+#define                        SPI1_STAT  0xffc02308   /* SPI1 Status Register */
+#define                        SPI1_TDBR  0xffc0230c   /* SPI1 Transmit Data Buffer Register */
+#define                        SPI1_RDBR  0xffc02310   /* SPI1 Receive Data Buffer Register */
+#define                        SPI1_BAUD  0xffc02314   /* SPI1 Baud Rate Register */
+#define                      SPI1_SHADOW  0xffc02318   /* SPI1 Receive Data Buffer Shadow Register */
+
+/* SPORT2 Registers */
+
+#define                      SPORT2_TCR1  0xffc02500   /* SPORT2 Transmit Configuration 1 Register */
+#define                      SPORT2_TCR2  0xffc02504   /* SPORT2 Transmit Configuration 2 Register */
+#define                   SPORT2_TCLKDIV  0xffc02508   /* SPORT2 Transmit Serial Clock Divider Register */
+#define                    SPORT2_TFSDIV  0xffc0250c   /* SPORT2 Transmit Frame Sync Divider Register */
+#define                        SPORT2_TX  0xffc02510   /* SPORT2 Transmit Data Register */
+#define                        SPORT2_RX  0xffc02518   /* SPORT2 Receive Data Register */
+#define                      SPORT2_RCR1  0xffc02520   /* SPORT2 Receive Configuration 1 Register */
+#define                      SPORT2_RCR2  0xffc02524   /* SPORT2 Receive Configuration 2 Register */
+#define                   SPORT2_RCLKDIV  0xffc02528   /* SPORT2 Receive Serial Clock Divider Register */
+#define                    SPORT2_RFSDIV  0xffc0252c   /* SPORT2 Receive Frame Sync Divider Register */
+#define                      SPORT2_STAT  0xffc02530   /* SPORT2 Status Register */
+#define                      SPORT2_CHNL  0xffc02534   /* SPORT2 Current Channel Register */
+#define                     SPORT2_MCMC1  0xffc02538   /* SPORT2 Multi channel Configuration Register 1 */
+#define                     SPORT2_MCMC2  0xffc0253c   /* SPORT2 Multi channel Configuration Register 2 */
+#define                     SPORT2_MTCS0  0xffc02540   /* SPORT2 Multi channel Transmit Select Register 0 */
+#define                     SPORT2_MTCS1  0xffc02544   /* SPORT2 Multi channel Transmit Select Register 1 */
+#define                     SPORT2_MTCS2  0xffc02548   /* SPORT2 Multi channel Transmit Select Register 2 */
+#define                     SPORT2_MTCS3  0xffc0254c   /* SPORT2 Multi channel Transmit Select Register 3 */
+#define                     SPORT2_MRCS0  0xffc02550   /* SPORT2 Multi channel Receive Select Register 0 */
+#define                     SPORT2_MRCS1  0xffc02554   /* SPORT2 Multi channel Receive Select Register 1 */
+#define                     SPORT2_MRCS2  0xffc02558   /* SPORT2 Multi channel Receive Select Register 2 */
+#define                     SPORT2_MRCS3  0xffc0255c   /* SPORT2 Multi channel Receive Select Register 3 */
+
+/* SPORT3 Registers */
+
+#define                      SPORT3_TCR1  0xffc02600   /* SPORT3 Transmit Configuration 1 Register */
+#define                      SPORT3_TCR2  0xffc02604   /* SPORT3 Transmit Configuration 2 Register */
+#define                   SPORT3_TCLKDIV  0xffc02608   /* SPORT3 Transmit Serial Clock Divider Register */
+#define                    SPORT3_TFSDIV  0xffc0260c   /* SPORT3 Transmit Frame Sync Divider Register */
+#define                        SPORT3_TX  0xffc02610   /* SPORT3 Transmit Data Register */
+#define                        SPORT3_RX  0xffc02618   /* SPORT3 Receive Data Register */
+#define                      SPORT3_RCR1  0xffc02620   /* SPORT3 Receive Configuration 1 Register */
+#define                      SPORT3_RCR2  0xffc02624   /* SPORT3 Receive Configuration 2 Register */
+#define                   SPORT3_RCLKDIV  0xffc02628   /* SPORT3 Receive Serial Clock Divider Register */
+#define                    SPORT3_RFSDIV  0xffc0262c   /* SPORT3 Receive Frame Sync Divider Register */
+#define                      SPORT3_STAT  0xffc02630   /* SPORT3 Status Register */
+#define                      SPORT3_CHNL  0xffc02634   /* SPORT3 Current Channel Register */
+#define                     SPORT3_MCMC1  0xffc02638   /* SPORT3 Multi channel Configuration Register 1 */
+#define                     SPORT3_MCMC2  0xffc0263c   /* SPORT3 Multi channel Configuration Register 2 */
+#define                     SPORT3_MTCS0  0xffc02640   /* SPORT3 Multi channel Transmit Select Register 0 */
+#define                     SPORT3_MTCS1  0xffc02644   /* SPORT3 Multi channel Transmit Select Register 1 */
+#define                     SPORT3_MTCS2  0xffc02648   /* SPORT3 Multi channel Transmit Select Register 2 */
+#define                     SPORT3_MTCS3  0xffc0264c   /* SPORT3 Multi channel Transmit Select Register 3 */
+#define                     SPORT3_MRCS0  0xffc02650   /* SPORT3 Multi channel Receive Select Register 0 */
+#define                     SPORT3_MRCS1  0xffc02654   /* SPORT3 Multi channel Receive Select Register 1 */
+#define                     SPORT3_MRCS2  0xffc02658   /* SPORT3 Multi channel Receive Select Register 2 */
+#define                     SPORT3_MRCS3  0xffc0265c   /* SPORT3 Multi channel Receive Select Register 3 */
+
+/* EPPI2 Registers */
+
+#define                     EPPI2_STATUS  0xffc02900   /* EPPI2 Status Register */
+#define                     EPPI2_HCOUNT  0xffc02904   /* EPPI2 Horizontal Transfer Count Register */
+#define                     EPPI2_HDELAY  0xffc02908   /* EPPI2 Horizontal Delay Count Register */
+#define                     EPPI2_VCOUNT  0xffc0290c   /* EPPI2 Vertical Transfer Count Register */
+#define                     EPPI2_VDELAY  0xffc02910   /* EPPI2 Vertical Delay Count Register */
+#define                      EPPI2_FRAME  0xffc02914   /* EPPI2 Lines per Frame Register */
+#define                       EPPI2_LINE  0xffc02918   /* EPPI2 Samples per Line Register */
+#define                     EPPI2_CLKDIV  0xffc0291c   /* EPPI2 Clock Divide Register */
+#define                    EPPI2_CONTROL  0xffc02920   /* EPPI2 Control Register */
+#define                   EPPI2_FS1W_HBL  0xffc02924   /* EPPI2 FS1 Width Register / EPPI2 Horizontal Blanking Samples Per Line Register */
+#define                  EPPI2_FS1P_AVPL  0xffc02928   /* EPPI2 FS1 Period Register / EPPI2 Active Video Samples Per Line Register */
+#define                   EPPI2_FS2W_LVB  0xffc0292c   /* EPPI2 FS2 Width Register / EPPI2 Lines of Vertical Blanking Register */
+#define                  EPPI2_FS2P_LAVF  0xffc02930   /* EPPI2 FS2 Period Register/ EPPI2 Lines of Active Video Per Field Register */
+#define                       EPPI2_CLIP  0xffc02934   /* EPPI2 Clipping Register */
+
+/* CAN Controller 0 Config 1 Registers */
+
+#define                         CAN0_MC1  0xffc02a00   /* CAN Controller 0 Mailbox Configuration Register 1 */
+#define                         CAN0_MD1  0xffc02a04   /* CAN Controller 0 Mailbox Direction Register 1 */
+#define                        CAN0_TRS1  0xffc02a08   /* CAN Controller 0 Transmit Request Set Register 1 */
+#define                        CAN0_TRR1  0xffc02a0c   /* CAN Controller 0 Transmit Request Reset Register 1 */
+#define                         CAN0_TA1  0xffc02a10   /* CAN Controller 0 Transmit Acknowledge Register 1 */
+#define                         CAN0_AA1  0xffc02a14   /* CAN Controller 0 Abort Acknowledge Register 1 */
+#define                        CAN0_RMP1  0xffc02a18   /* CAN Controller 0 Receive Message Pending Register 1 */
+#define                        CAN0_RML1  0xffc02a1c   /* CAN Controller 0 Receive Message Lost Register 1 */
+#define                      CAN0_MBTIF1  0xffc02a20   /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 1 */
+#define                      CAN0_MBRIF1  0xffc02a24   /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 1 */
+#define                       CAN0_MBIM1  0xffc02a28   /* CAN Controller 0 Mailbox Interrupt Mask Register 1 */
+#define                        CAN0_RFH1  0xffc02a2c   /* CAN Controller 0 Remote Frame Handling Enable Register 1 */
+#define                       CAN0_OPSS1  0xffc02a30   /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 1 */
+
+/* CAN Controller 0 Config 2 Registers */
+
+#define                         CAN0_MC2  0xffc02a40   /* CAN Controller 0 Mailbox Configuration Register 2 */
+#define                         CAN0_MD2  0xffc02a44   /* CAN Controller 0 Mailbox Direction Register 2 */
+#define                        CAN0_TRS2  0xffc02a48   /* CAN Controller 0 Transmit Request Set Register 2 */
+#define                        CAN0_TRR2  0xffc02a4c   /* CAN Controller 0 Transmit Request Reset Register 2 */
+#define                         CAN0_TA2  0xffc02a50   /* CAN Controller 0 Transmit Acknowledge Register 2 */
+#define                         CAN0_AA2  0xffc02a54   /* CAN Controller 0 Abort Acknowledge Register 2 */
+#define                        CAN0_RMP2  0xffc02a58   /* CAN Controller 0 Receive Message Pending Register 2 */
+#define                        CAN0_RML2  0xffc02a5c   /* CAN Controller 0 Receive Message Lost Register 2 */
+#define                      CAN0_MBTIF2  0xffc02a60   /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 2 */
+#define                      CAN0_MBRIF2  0xffc02a64   /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 2 */
+#define                       CAN0_MBIM2  0xffc02a68   /* CAN Controller 0 Mailbox Interrupt Mask Register 2 */
+#define                        CAN0_RFH2  0xffc02a6c   /* CAN Controller 0 Remote Frame Handling Enable Register 2 */
+#define                       CAN0_OPSS2  0xffc02a70   /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 2 */
+
+/* CAN Controller 0 Clock/Interrupt/Counter Registers */
+
+#define                       CAN0_CLOCK  0xffc02a80   /* CAN Controller 0 Clock Register */
+#define                      CAN0_TIMING  0xffc02a84   /* CAN Controller 0 Timing Register */
+#define                       CAN0_DEBUG  0xffc02a88   /* CAN Controller 0 Debug Register */
+#define                      CAN0_STATUS  0xffc02a8c   /* CAN Controller 0 Global Status Register */
+#define                         CAN0_CEC  0xffc02a90   /* CAN Controller 0 Error Counter Register */
+#define                         CAN0_GIS  0xffc02a94   /* CAN Controller 0 Global Interrupt Status Register */
+#define                         CAN0_GIM  0xffc02a98   /* CAN Controller 0 Global Interrupt Mask Register */
+#define                         CAN0_GIF  0xffc02a9c   /* CAN Controller 0 Global Interrupt Flag Register */
+#define                     CAN0_CONTROL  0xffc02aa0   /* CAN Controller 0 Master Control Register */
+#define                        CAN0_INTR  0xffc02aa4   /* CAN Controller 0 Interrupt Pending Register */
+#define                        CAN0_MBTD  0xffc02aac   /* CAN Controller 0 Mailbox Temporary Disable Register */
+#define                         CAN0_EWR  0xffc02ab0   /* CAN Controller 0 Programmable Warning Level Register */
+#define                         CAN0_ESR  0xffc02ab4   /* CAN Controller 0 Error Status Register */
+#define                       CAN0_UCCNT  0xffc02ac4   /* CAN Controller 0 Universal Counter Register */
+#define                        CAN0_UCRC  0xffc02ac8   /* CAN Controller 0 Universal Counter Force Reload Register */
+#define                       CAN0_UCCNF  0xffc02acc   /* CAN Controller 0 Universal Counter Configuration Register */
+
+/* CAN Controller 0 Acceptance Registers */
+
+#define                       CAN0_AM00L  0xffc02b00   /* CAN Controller 0 Mailbox 0 Acceptance Mask High Register */
+#define                       CAN0_AM00H  0xffc02b04   /* CAN Controller 0 Mailbox 0 Acceptance Mask Low Register */
+#define                       CAN0_AM01L  0xffc02b08   /* CAN Controller 0 Mailbox 1 Acceptance Mask High Register */
+#define                       CAN0_AM01H  0xffc02b0c   /* CAN Controller 0 Mailbox 1 Acceptance Mask Low Register */
+#define                       CAN0_AM02L  0xffc02b10   /* CAN Controller 0 Mailbox 2 Acceptance Mask High Register */
+#define                       CAN0_AM02H  0xffc02b14   /* CAN Controller 0 Mailbox 2 Acceptance Mask Low Register */
+#define                       CAN0_AM03L  0xffc02b18   /* CAN Controller 0 Mailbox 3 Acceptance Mask High Register */
+#define                       CAN0_AM03H  0xffc02b1c   /* CAN Controller 0 Mailbox 3 Acceptance Mask Low Register */
+#define                       CAN0_AM04L  0xffc02b20   /* CAN Controller 0 Mailbox 4 Acceptance Mask High Register */
+#define                       CAN0_AM04H  0xffc02b24   /* CAN Controller 0 Mailbox 4 Acceptance Mask Low Register */
+#define                       CAN0_AM05L  0xffc02b28   /* CAN Controller 0 Mailbox 5 Acceptance Mask High Register */
+#define                       CAN0_AM05H  0xffc02b2c   /* CAN Controller 0 Mailbox 5 Acceptance Mask Low Register */
+#define                       CAN0_AM06L  0xffc02b30   /* CAN Controller 0 Mailbox 6 Acceptance Mask High Register */
+#define                       CAN0_AM06H  0xffc02b34   /* CAN Controller 0 Mailbox 6 Acceptance Mask Low Register */
+#define                       CAN0_AM07L  0xffc02b38   /* CAN Controller 0 Mailbox 7 Acceptance Mask High Register */
+#define                       CAN0_AM07H  0xffc02b3c   /* CAN Controller 0 Mailbox 7 Acceptance Mask Low Register */
+#define                       CAN0_AM08L  0xffc02b40   /* CAN Controller 0 Mailbox 8 Acceptance Mask High Register */
+#define                       CAN0_AM08H  0xffc02b44   /* CAN Controller 0 Mailbox 8 Acceptance Mask Low Register */
+#define                       CAN0_AM09L  0xffc02b48   /* CAN Controller 0 Mailbox 9 Acceptance Mask High Register */
+#define                       CAN0_AM09H  0xffc02b4c   /* CAN Controller 0 Mailbox 9 Acceptance Mask Low Register */
+#define                       CAN0_AM10L  0xffc02b50   /* CAN Controller 0 Mailbox 10 Acceptance Mask High Register */
+#define                       CAN0_AM10H  0xffc02b54   /* CAN Controller 0 Mailbox 10 Acceptance Mask Low Register */
+#define                       CAN0_AM11L  0xffc02b58   /* CAN Controller 0 Mailbox 11 Acceptance Mask High Register */
+#define                       CAN0_AM11H  0xffc02b5c   /* CAN Controller 0 Mailbox 11 Acceptance Mask Low Register */
+#define                       CAN0_AM12L  0xffc02b60   /* CAN Controller 0 Mailbox 12 Acceptance Mask High Register */
+#define                       CAN0_AM12H  0xffc02b64   /* CAN Controller 0 Mailbox 12 Acceptance Mask Low Register */
+#define                       CAN0_AM13L  0xffc02b68   /* CAN Controller 0 Mailbox 13 Acceptance Mask High Register */
+#define                       CAN0_AM13H  0xffc02b6c   /* CAN Controller 0 Mailbox 13 Acceptance Mask Low Register */
+#define                       CAN0_AM14L  0xffc02b70   /* CAN Controller 0 Mailbox 14 Acceptance Mask High Register */
+#define                       CAN0_AM14H  0xffc02b74   /* CAN Controller 0 Mailbox 14 Acceptance Mask Low Register */
+#define                       CAN0_AM15L  0xffc02b78   /* CAN Controller 0 Mailbox 15 Acceptance Mask High Register */
+#define                       CAN0_AM15H  0xffc02b7c   /* CAN Controller 0 Mailbox 15 Acceptance Mask Low Register */
+
+/* CAN Controller 0 Acceptance Registers */
+
+#define                       CAN0_AM16L  0xffc02b80   /* CAN Controller 0 Mailbox 16 Acceptance Mask High Register */
+#define                       CAN0_AM16H  0xffc02b84   /* CAN Controller 0 Mailbox 16 Acceptance Mask Low Register */
+#define                       CAN0_AM17L  0xffc02b88   /* CAN Controller 0 Mailbox 17 Acceptance Mask High Register */
+#define                       CAN0_AM17H  0xffc02b8c   /* CAN Controller 0 Mailbox 17 Acceptance Mask Low Register */
+#define                       CAN0_AM18L  0xffc02b90   /* CAN Controller 0 Mailbox 18 Acceptance Mask High Register */
+#define                       CAN0_AM18H  0xffc02b94   /* CAN Controller 0 Mailbox 18 Acceptance Mask Low Register */
+#define                       CAN0_AM19L  0xffc02b98   /* CAN Controller 0 Mailbox 19 Acceptance Mask High Register */
+#define                       CAN0_AM19H  0xffc02b9c   /* CAN Controller 0 Mailbox 19 Acceptance Mask Low Register */
+#define                       CAN0_AM20L  0xffc02ba0   /* CAN Controller 0 Mailbox 20 Acceptance Mask High Register */
+#define                       CAN0_AM20H  0xffc02ba4   /* CAN Controller 0 Mailbox 20 Acceptance Mask Low Register */
+#define                       CAN0_AM21L  0xffc02ba8   /* CAN Controller 0 Mailbox 21 Acceptance Mask High Register */
+#define                       CAN0_AM21H  0xffc02bac   /* CAN Controller 0 Mailbox 21 Acceptance Mask Low Register */
+#define                       CAN0_AM22L  0xffc02bb0   /* CAN Controller 0 Mailbox 22 Acceptance Mask High Register */
+#define                       CAN0_AM22H  0xffc02bb4   /* CAN Controller 0 Mailbox 22 Acceptance Mask Low Register */
+#define                       CAN0_AM23L  0xffc02bb8   /* CAN Controller 0 Mailbox 23 Acceptance Mask High Register */
+#define                       CAN0_AM23H  0xffc02bbc   /* CAN Controller 0 Mailbox 23 Acceptance Mask Low Register */
+#define                       CAN0_AM24L  0xffc02bc0   /* CAN Controller 0 Mailbox 24 Acceptance Mask High Register */
+#define                       CAN0_AM24H  0xffc02bc4   /* CAN Controller 0 Mailbox 24 Acceptance Mask Low Register */
+#define                       CAN0_AM25L  0xffc02bc8   /* CAN Controller 0 Mailbox 25 Acceptance Mask High Register */
+#define                       CAN0_AM25H  0xffc02bcc   /* CAN Controller 0 Mailbox 25 Acceptance Mask Low Register */
+#define                       CAN0_AM26L  0xffc02bd0   /* CAN Controller 0 Mailbox 26 Acceptance Mask High Register */
+#define                       CAN0_AM26H  0xffc02bd4   /* CAN Controller 0 Mailbox 26 Acceptance Mask Low Register */
+#define                       CAN0_AM27L  0xffc02bd8   /* CAN Controller 0 Mailbox 27 Acceptance Mask High Register */
+#define                       CAN0_AM27H  0xffc02bdc   /* CAN Controller 0 Mailbox 27 Acceptance Mask Low Register */
+#define                       CAN0_AM28L  0xffc02be0   /* CAN Controller 0 Mailbox 28 Acceptance Mask High Register */
+#define                       CAN0_AM28H  0xffc02be4   /* CAN Controller 0 Mailbox 28 Acceptance Mask Low Register */
+#define                       CAN0_AM29L  0xffc02be8   /* CAN Controller 0 Mailbox 29 Acceptance Mask High Register */
+#define                       CAN0_AM29H  0xffc02bec   /* CAN Controller 0 Mailbox 29 Acceptance Mask Low Register */
+#define                       CAN0_AM30L  0xffc02bf0   /* CAN Controller 0 Mailbox 30 Acceptance Mask High Register */
+#define                       CAN0_AM30H  0xffc02bf4   /* CAN Controller 0 Mailbox 30 Acceptance Mask Low Register */
+#define                       CAN0_AM31L  0xffc02bf8   /* CAN Controller 0 Mailbox 31 Acceptance Mask High Register */
+#define                       CAN0_AM31H  0xffc02bfc   /* CAN Controller 0 Mailbox 31 Acceptance Mask Low Register */
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define                  CAN0_MB00_DATA0  0xffc02c00   /* CAN Controller 0 Mailbox 0 Data 0 Register */
+#define                  CAN0_MB00_DATA1  0xffc02c04   /* CAN Controller 0 Mailbox 0 Data 1 Register */
+#define                  CAN0_MB00_DATA2  0xffc02c08   /* CAN Controller 0 Mailbox 0 Data 2 Register */
+#define                  CAN0_MB00_DATA3  0xffc02c0c   /* CAN Controller 0 Mailbox 0 Data 3 Register */
+#define                 CAN0_MB00_LENGTH  0xffc02c10   /* CAN Controller 0 Mailbox 0 Length Register */
+#define              CAN0_MB00_TIMESTAMP  0xffc02c14   /* CAN Controller 0 Mailbox 0 Timestamp Register */
+#define                    CAN0_MB00_ID0  0xffc02c18   /* CAN Controller 0 Mailbox 0 ID0 Register */
+#define                    CAN0_MB00_ID1  0xffc02c1c   /* CAN Controller 0 Mailbox 0 ID1 Register */
+#define                  CAN0_MB01_DATA0  0xffc02c20   /* CAN Controller 0 Mailbox 1 Data 0 Register */
+#define                  CAN0_MB01_DATA1  0xffc02c24   /* CAN Controller 0 Mailbox 1 Data 1 Register */
+#define                  CAN0_MB01_DATA2  0xffc02c28   /* CAN Controller 0 Mailbox 1 Data 2 Register */
+#define                  CAN0_MB01_DATA3  0xffc02c2c   /* CAN Controller 0 Mailbox 1 Data 3 Register */
+#define                 CAN0_MB01_LENGTH  0xffc02c30   /* CAN Controller 0 Mailbox 1 Length Register */
+#define              CAN0_MB01_TIMESTAMP  0xffc02c34   /* CAN Controller 0 Mailbox 1 Timestamp Register */
+#define                    CAN0_MB01_ID0  0xffc02c38   /* CAN Controller 0 Mailbox 1 ID0 Register */
+#define                    CAN0_MB01_ID1  0xffc02c3c   /* CAN Controller 0 Mailbox 1 ID1 Register */
+#define                  CAN0_MB02_DATA0  0xffc02c40   /* CAN Controller 0 Mailbox 2 Data 0 Register */
+#define                  CAN0_MB02_DATA1  0xffc02c44   /* CAN Controller 0 Mailbox 2 Data 1 Register */
+#define                  CAN0_MB02_DATA2  0xffc02c48   /* CAN Controller 0 Mailbox 2 Data 2 Register */
+#define                  CAN0_MB02_DATA3  0xffc02c4c   /* CAN Controller 0 Mailbox 2 Data 3 Register */
+#define                 CAN0_MB02_LENGTH  0xffc02c50   /* CAN Controller 0 Mailbox 2 Length Register */
+#define              CAN0_MB02_TIMESTAMP  0xffc02c54   /* CAN Controller 0 Mailbox 2 Timestamp Register */
+#define                    CAN0_MB02_ID0  0xffc02c58   /* CAN Controller 0 Mailbox 2 ID0 Register */
+#define                    CAN0_MB02_ID1  0xffc02c5c   /* CAN Controller 0 Mailbox 2 ID1 Register */
+#define                  CAN0_MB03_DATA0  0xffc02c60   /* CAN Controller 0 Mailbox 3 Data 0 Register */
+#define                  CAN0_MB03_DATA1  0xffc02c64   /* CAN Controller 0 Mailbox 3 Data 1 Register */
+#define                  CAN0_MB03_DATA2  0xffc02c68   /* CAN Controller 0 Mailbox 3 Data 2 Register */
+#define                  CAN0_MB03_DATA3  0xffc02c6c   /* CAN Controller 0 Mailbox 3 Data 3 Register */
+#define                 CAN0_MB03_LENGTH  0xffc02c70   /* CAN Controller 0 Mailbox 3 Length Register */
+#define              CAN0_MB03_TIMESTAMP  0xffc02c74   /* CAN Controller 0 Mailbox 3 Timestamp Register */
+#define                    CAN0_MB03_ID0  0xffc02c78   /* CAN Controller 0 Mailbox 3 ID0 Register */
+#define                    CAN0_MB03_ID1  0xffc02c7c   /* CAN Controller 0 Mailbox 3 ID1 Register */
+#define                  CAN0_MB04_DATA0  0xffc02c80   /* CAN Controller 0 Mailbox 4 Data 0 Register */
+#define                  CAN0_MB04_DATA1  0xffc02c84   /* CAN Controller 0 Mailbox 4 Data 1 Register */
+#define                  CAN0_MB04_DATA2  0xffc02c88   /* CAN Controller 0 Mailbox 4 Data 2 Register */
+#define                  CAN0_MB04_DATA3  0xffc02c8c   /* CAN Controller 0 Mailbox 4 Data 3 Register */
+#define                 CAN0_MB04_LENGTH  0xffc02c90   /* CAN Controller 0 Mailbox 4 Length Register */
+#define              CAN0_MB04_TIMESTAMP  0xffc02c94   /* CAN Controller 0 Mailbox 4 Timestamp Register */
+#define                    CAN0_MB04_ID0  0xffc02c98   /* CAN Controller 0 Mailbox 4 ID0 Register */
+#define                    CAN0_MB04_ID1  0xffc02c9c   /* CAN Controller 0 Mailbox 4 ID1 Register */
+#define                  CAN0_MB05_DATA0  0xffc02ca0   /* CAN Controller 0 Mailbox 5 Data 0 Register */
+#define                  CAN0_MB05_DATA1  0xffc02ca4   /* CAN Controller 0 Mailbox 5 Data 1 Register */
+#define                  CAN0_MB05_DATA2  0xffc02ca8   /* CAN Controller 0 Mailbox 5 Data 2 Register */
+#define                  CAN0_MB05_DATA3  0xffc02cac   /* CAN Controller 0 Mailbox 5 Data 3 Register */
+#define                 CAN0_MB05_LENGTH  0xffc02cb0   /* CAN Controller 0 Mailbox 5 Length Register */
+#define              CAN0_MB05_TIMESTAMP  0xffc02cb4   /* CAN Controller 0 Mailbox 5 Timestamp Register */
+#define                    CAN0_MB05_ID0  0xffc02cb8   /* CAN Controller 0 Mailbox 5 ID0 Register */
+#define                    CAN0_MB05_ID1  0xffc02cbc   /* CAN Controller 0 Mailbox 5 ID1 Register */
+#define                  CAN0_MB06_DATA0  0xffc02cc0   /* CAN Controller 0 Mailbox 6 Data 0 Register */
+#define                  CAN0_MB06_DATA1  0xffc02cc4   /* CAN Controller 0 Mailbox 6 Data 1 Register */
+#define                  CAN0_MB06_DATA2  0xffc02cc8   /* CAN Controller 0 Mailbox 6 Data 2 Register */
+#define                  CAN0_MB06_DATA3  0xffc02ccc   /* CAN Controller 0 Mailbox 6 Data 3 Register */
+#define                 CAN0_MB06_LENGTH  0xffc02cd0   /* CAN Controller 0 Mailbox 6 Length Register */
+#define              CAN0_MB06_TIMESTAMP  0xffc02cd4   /* CAN Controller 0 Mailbox 6 Timestamp Register */
+#define                    CAN0_MB06_ID0  0xffc02cd8   /* CAN Controller 0 Mailbox 6 ID0 Register */
+#define                    CAN0_MB06_ID1  0xffc02cdc   /* CAN Controller 0 Mailbox 6 ID1 Register */
+#define                  CAN0_MB07_DATA0  0xffc02ce0   /* CAN Controller 0 Mailbox 7 Data 0 Register */
+#define                  CAN0_MB07_DATA1  0xffc02ce4   /* CAN Controller 0 Mailbox 7 Data 1 Register */
+#define                  CAN0_MB07_DATA2  0xffc02ce8   /* CAN Controller 0 Mailbox 7 Data 2 Register */
+#define                  CAN0_MB07_DATA3  0xffc02cec   /* CAN Controller 0 Mailbox 7 Data 3 Register */
+#define                 CAN0_MB07_LENGTH  0xffc02cf0   /* CAN Controller 0 Mailbox 7 Length Register */
+#define              CAN0_MB07_TIMESTAMP  0xffc02cf4   /* CAN Controller 0 Mailbox 7 Timestamp Register */
+#define                    CAN0_MB07_ID0  0xffc02cf8   /* CAN Controller 0 Mailbox 7 ID0 Register */
+#define                    CAN0_MB07_ID1  0xffc02cfc   /* CAN Controller 0 Mailbox 7 ID1 Register */
+#define                  CAN0_MB08_DATA0  0xffc02d00   /* CAN Controller 0 Mailbox 8 Data 0 Register */
+#define                  CAN0_MB08_DATA1  0xffc02d04   /* CAN Controller 0 Mailbox 8 Data 1 Register */
+#define                  CAN0_MB08_DATA2  0xffc02d08   /* CAN Controller 0 Mailbox 8 Data 2 Register */
+#define                  CAN0_MB08_DATA3  0xffc02d0c   /* CAN Controller 0 Mailbox 8 Data 3 Register */
+#define                 CAN0_MB08_LENGTH  0xffc02d10   /* CAN Controller 0 Mailbox 8 Length Register */
+#define              CAN0_MB08_TIMESTAMP  0xffc02d14   /* CAN Controller 0 Mailbox 8 Timestamp Register */
+#define                    CAN0_MB08_ID0  0xffc02d18   /* CAN Controller 0 Mailbox 8 ID0 Register */
+#define                    CAN0_MB08_ID1  0xffc02d1c   /* CAN Controller 0 Mailbox 8 ID1 Register */
+#define                  CAN0_MB09_DATA0  0xffc02d20   /* CAN Controller 0 Mailbox 9 Data 0 Register */
+#define                  CAN0_MB09_DATA1  0xffc02d24   /* CAN Controller 0 Mailbox 9 Data 1 Register */
+#define                  CAN0_MB09_DATA2  0xffc02d28   /* CAN Controller 0 Mailbox 9 Data 2 Register */
+#define                  CAN0_MB09_DATA3  0xffc02d2c   /* CAN Controller 0 Mailbox 9 Data 3 Register */
+#define                 CAN0_MB09_LENGTH  0xffc02d30   /* CAN Controller 0 Mailbox 9 Length Register */
+#define              CAN0_MB09_TIMESTAMP  0xffc02d34   /* CAN Controller 0 Mailbox 9 Timestamp Register */
+#define                    CAN0_MB09_ID0  0xffc02d38   /* CAN Controller 0 Mailbox 9 ID0 Register */
+#define                    CAN0_MB09_ID1  0xffc02d3c   /* CAN Controller 0 Mailbox 9 ID1 Register */
+#define                  CAN0_MB10_DATA0  0xffc02d40   /* CAN Controller 0 Mailbox 10 Data 0 Register */
+#define                  CAN0_MB10_DATA1  0xffc02d44   /* CAN Controller 0 Mailbox 10 Data 1 Register */
+#define                  CAN0_MB10_DATA2  0xffc02d48   /* CAN Controller 0 Mailbox 10 Data 2 Register */
+#define                  CAN0_MB10_DATA3  0xffc02d4c   /* CAN Controller 0 Mailbox 10 Data 3 Register */
+#define                 CAN0_MB10_LENGTH  0xffc02d50   /* CAN Controller 0 Mailbox 10 Length Register */
+#define              CAN0_MB10_TIMESTAMP  0xffc02d54   /* CAN Controller 0 Mailbox 10 Timestamp Register */
+#define                    CAN0_MB10_ID0  0xffc02d58   /* CAN Controller 0 Mailbox 10 ID0 Register */
+#define                    CAN0_MB10_ID1  0xffc02d5c   /* CAN Controller 0 Mailbox 10 ID1 Register */
+#define                  CAN0_MB11_DATA0  0xffc02d60   /* CAN Controller 0 Mailbox 11 Data 0 Register */
+#define                  CAN0_MB11_DATA1  0xffc02d64   /* CAN Controller 0 Mailbox 11 Data 1 Register */
+#define                  CAN0_MB11_DATA2  0xffc02d68   /* CAN Controller 0 Mailbox 11 Data 2 Register */
+#define                  CAN0_MB11_DATA3  0xffc02d6c   /* CAN Controller 0 Mailbox 11 Data 3 Register */
+#define                 CAN0_MB11_LENGTH  0xffc02d70   /* CAN Controller 0 Mailbox 11 Length Register */
+#define              CAN0_MB11_TIMESTAMP  0xffc02d74   /* CAN Controller 0 Mailbox 11 Timestamp Register */
+#define                    CAN0_MB11_ID0  0xffc02d78   /* CAN Controller 0 Mailbox 11 ID0 Register */
+#define                    CAN0_MB11_ID1  0xffc02d7c   /* CAN Controller 0 Mailbox 11 ID1 Register */
+#define                  CAN0_MB12_DATA0  0xffc02d80   /* CAN Controller 0 Mailbox 12 Data 0 Register */
+#define                  CAN0_MB12_DATA1  0xffc02d84   /* CAN Controller 0 Mailbox 12 Data 1 Register */
+#define                  CAN0_MB12_DATA2  0xffc02d88   /* CAN Controller 0 Mailbox 12 Data 2 Register */
+#define                  CAN0_MB12_DATA3  0xffc02d8c   /* CAN Controller 0 Mailbox 12 Data 3 Register */
+#define                 CAN0_MB12_LENGTH  0xffc02d90   /* CAN Controller 0 Mailbox 12 Length Register */
+#define              CAN0_MB12_TIMESTAMP  0xffc02d94   /* CAN Controller 0 Mailbox 12 Timestamp Register */
+#define                    CAN0_MB12_ID0  0xffc02d98   /* CAN Controller 0 Mailbox 12 ID0 Register */
+#define                    CAN0_MB12_ID1  0xffc02d9c   /* CAN Controller 0 Mailbox 12 ID1 Register */
+#define                  CAN0_MB13_DATA0  0xffc02da0   /* CAN Controller 0 Mailbox 13 Data 0 Register */
+#define                  CAN0_MB13_DATA1  0xffc02da4   /* CAN Controller 0 Mailbox 13 Data 1 Register */
+#define                  CAN0_MB13_DATA2  0xffc02da8   /* CAN Controller 0 Mailbox 13 Data 2 Register */
+#define                  CAN0_MB13_DATA3  0xffc02dac   /* CAN Controller 0 Mailbox 13 Data 3 Register */
+#define                 CAN0_MB13_LENGTH  0xffc02db0   /* CAN Controller 0 Mailbox 13 Length Register */
+#define              CAN0_MB13_TIMESTAMP  0xffc02db4   /* CAN Controller 0 Mailbox 13 Timestamp Register */
+#define                    CAN0_MB13_ID0  0xffc02db8   /* CAN Controller 0 Mailbox 13 ID0 Register */
+#define                    CAN0_MB13_ID1  0xffc02dbc   /* CAN Controller 0 Mailbox 13 ID1 Register */
+#define                  CAN0_MB14_DATA0  0xffc02dc0   /* CAN Controller 0 Mailbox 14 Data 0 Register */
+#define                  CAN0_MB14_DATA1  0xffc02dc4   /* CAN Controller 0 Mailbox 14 Data 1 Register */
+#define                  CAN0_MB14_DATA2  0xffc02dc8   /* CAN Controller 0 Mailbox 14 Data 2 Register */
+#define                  CAN0_MB14_DATA3  0xffc02dcc   /* CAN Controller 0 Mailbox 14 Data 3 Register */
+#define                 CAN0_MB14_LENGTH  0xffc02dd0   /* CAN Controller 0 Mailbox 14 Length Register */
+#define              CAN0_MB14_TIMESTAMP  0xffc02dd4   /* CAN Controller 0 Mailbox 14 Timestamp Register */
+#define                    CAN0_MB14_ID0  0xffc02dd8   /* CAN Controller 0 Mailbox 14 ID0 Register */
+#define                    CAN0_MB14_ID1  0xffc02ddc   /* CAN Controller 0 Mailbox 14 ID1 Register */
+#define                  CAN0_MB15_DATA0  0xffc02de0   /* CAN Controller 0 Mailbox 15 Data 0 Register */
+#define                  CAN0_MB15_DATA1  0xffc02de4   /* CAN Controller 0 Mailbox 15 Data 1 Register */
+#define                  CAN0_MB15_DATA2  0xffc02de8   /* CAN Controller 0 Mailbox 15 Data 2 Register */
+#define                  CAN0_MB15_DATA3  0xffc02dec   /* CAN Controller 0 Mailbox 15 Data 3 Register */
+#define                 CAN0_MB15_LENGTH  0xffc02df0   /* CAN Controller 0 Mailbox 15 Length Register */
+#define              CAN0_MB15_TIMESTAMP  0xffc02df4   /* CAN Controller 0 Mailbox 15 Timestamp Register */
+#define                    CAN0_MB15_ID0  0xffc02df8   /* CAN Controller 0 Mailbox 15 ID0 Register */
+#define                    CAN0_MB15_ID1  0xffc02dfc   /* CAN Controller 0 Mailbox 15 ID1 Register */
+
+/* CAN Controller 0 Mailbox Data Registers */
+
+#define                  CAN0_MB16_DATA0  0xffc02e00   /* CAN Controller 0 Mailbox 16 Data 0 Register */
+#define                  CAN0_MB16_DATA1  0xffc02e04   /* CAN Controller 0 Mailbox 16 Data 1 Register */
+#define                  CAN0_MB16_DATA2  0xffc02e08   /* CAN Controller 0 Mailbox 16 Data 2 Register */
+#define                  CAN0_MB16_DATA3  0xffc02e0c   /* CAN Controller 0 Mailbox 16 Data 3 Register */
+#define                 CAN0_MB16_LENGTH  0xffc02e10   /* CAN Controller 0 Mailbox 16 Length Register */
+#define              CAN0_MB16_TIMESTAMP  0xffc02e14   /* CAN Controller 0 Mailbox 16 Timestamp Register */
+#define                    CAN0_MB16_ID0  0xffc02e18   /* CAN Controller 0 Mailbox 16 ID0 Register */
+#define                    CAN0_MB16_ID1  0xffc02e1c   /* CAN Controller 0 Mailbox 16 ID1 Register */
+#define                  CAN0_MB17_DATA0  0xffc02e20   /* CAN Controller 0 Mailbox 17 Data 0 Register */
+#define                  CAN0_MB17_DATA1  0xffc02e24   /* CAN Controller 0 Mailbox 17 Data 1 Register */
+#define                  CAN0_MB17_DATA2  0xffc02e28   /* CAN Controller 0 Mailbox 17 Data 2 Register */
+#define                  CAN0_MB17_DATA3  0xffc02e2c   /* CAN Controller 0 Mailbox 17 Data 3 Register */
+#define                 CAN0_MB17_LENGTH  0xffc02e30   /* CAN Controller 0 Mailbox 17 Length Register */
+#define              CAN0_MB17_TIMESTAMP  0xffc02e34   /* CAN Controller 0 Mailbox 17 Timestamp Register */
+#define                    CAN0_MB17_ID0  0xffc02e38   /* CAN Controller 0 Mailbox 17 ID0 Register */
+#define                    CAN0_MB17_ID1  0xffc02e3c   /* CAN Controller 0 Mailbox 17 ID1 Register */
+#define                  CAN0_MB18_DATA0  0xffc02e40   /* CAN Controller 0 Mailbox 18 Data 0 Register */
+#define                  CAN0_MB18_DATA1  0xffc02e44   /* CAN Controller 0 Mailbox 18 Data 1 Register */
+#define                  CAN0_MB18_DATA2  0xffc02e48   /* CAN Controller 0 Mailbox 18 Data 2 Register */
+#define                  CAN0_MB18_DATA3  0xffc02e4c   /* CAN Controller 0 Mailbox 18 Data 3 Register */
+#define                 CAN0_MB18_LENGTH  0xffc02e50   /* CAN Controller 0 Mailbox 18 Length Register */
+#define              CAN0_MB18_TIMESTAMP  0xffc02e54   /* CAN Controller 0 Mailbox 18 Timestamp Register */
+#define                    CAN0_MB18_ID0  0xffc02e58   /* CAN Controller 0 Mailbox 18 ID0 Register */
+#define                    CAN0_MB18_ID1  0xffc02e5c   /* CAN Controller 0 Mailbox 18 ID1 Register */
+#define                  CAN0_MB19_DATA0  0xffc02e60   /* CAN Controller 0 Mailbox 19 Data 0 Register */
+#define                  CAN0_MB19_DATA1  0xffc02e64   /* CAN Controller 0 Mailbox 19 Data 1 Register */
+#define                  CAN0_MB19_DATA2  0xffc02e68   /* CAN Controller 0 Mailbox 19 Data 2 Register */
+#define                  CAN0_MB19_DATA3  0xffc02e6c   /* CAN Controller 0 Mailbox 19 Data 3 Register */
+#define                 CAN0_MB19_LENGTH  0xffc02e70   /* CAN Controller 0 Mailbox 19 Length Register */
+#define              CAN0_MB19_TIMESTAMP  0xffc02e74   /* CAN Controller 0 Mailbox 19 Timestamp Register */
+#define                    CAN0_MB19_ID0  0xffc02e78   /* CAN Controller 0 Mailbox 19 ID0 Register */
+#define                    CAN0_MB19_ID1  0xffc02e7c   /* CAN Controller 0 Mailbox 19 ID1 Register */
+#define                  CAN0_MB20_DATA0  0xffc02e80   /* CAN Controller 0 Mailbox 20 Data 0 Register */
+#define                  CAN0_MB20_DATA1  0xffc02e84   /* CAN Controller 0 Mailbox 20 Data 1 Register */
+#define                  CAN0_MB20_DATA2  0xffc02e88   /* CAN Controller 0 Mailbox 20 Data 2 Register */
+#define                  CAN0_MB20_DATA3  0xffc02e8c   /* CAN Controller 0 Mailbox 20 Data 3 Register */
+#define                 CAN0_MB20_LENGTH  0xffc02e90   /* CAN Controller 0 Mailbox 20 Length Register */
+#define              CAN0_MB20_TIMESTAMP  0xffc02e94   /* CAN Controller 0 Mailbox 20 Timestamp Register */
+#define                    CAN0_MB20_ID0  0xffc02e98   /* CAN Controller 0 Mailbox 20 ID0 Register */
+#define                    CAN0_MB20_ID1  0xffc02e9c   /* CAN Controller 0 Mailbox 20 ID1 Register */
+#define                  CAN0_MB21_DATA0  0xffc02ea0   /* CAN Controller 0 Mailbox 21 Data 0 Register */
+#define                  CAN0_MB21_DATA1  0xffc02ea4   /* CAN Controller 0 Mailbox 21 Data 1 Register */
+#define                  CAN0_MB21_DATA2  0xffc02ea8   /* CAN Controller 0 Mailbox 21 Data 2 Register */
+#define                  CAN0_MB21_DATA3  0xffc02eac   /* CAN Controller 0 Mailbox 21 Data 3 Register */
+#define                 CAN0_MB21_LENGTH  0xffc02eb0   /* CAN Controller 0 Mailbox 21 Length Register */
+#define              CAN0_MB21_TIMESTAMP  0xffc02eb4   /* CAN Controller 0 Mailbox 21 Timestamp Register */
+#define                    CAN0_MB21_ID0  0xffc02eb8   /* CAN Controller 0 Mailbox 21 ID0 Register */
+#define                    CAN0_MB21_ID1  0xffc02ebc   /* CAN Controller 0 Mailbox 21 ID1 Register */
+#define                  CAN0_MB22_DATA0  0xffc02ec0   /* CAN Controller 0 Mailbox 22 Data 0 Register */
+#define                  CAN0_MB22_DATA1  0xffc02ec4   /* CAN Controller 0 Mailbox 22 Data 1 Register */
+#define                  CAN0_MB22_DATA2  0xffc02ec8   /* CAN Controller 0 Mailbox 22 Data 2 Register */
+#define                  CAN0_MB22_DATA3  0xffc02ecc   /* CAN Controller 0 Mailbox 22 Data 3 Register */
+#define                 CAN0_MB22_LENGTH  0xffc02ed0   /* CAN Controller 0 Mailbox 22 Length Register */
+#define              CAN0_MB22_TIMESTAMP  0xffc02ed4   /* CAN Controller 0 Mailbox 22 Timestamp Register */
+#define                    CAN0_MB22_ID0  0xffc02ed8   /* CAN Controller 0 Mailbox 22 ID0 Register */
+#define                    CAN0_MB22_ID1  0xffc02edc   /* CAN Controller 0 Mailbox 22 ID1 Register */
+#define                  CAN0_MB23_DATA0  0xffc02ee0   /* CAN Controller 0 Mailbox 23 Data 0 Register */
+#define                  CAN0_MB23_DATA1  0xffc02ee4   /* CAN Controller 0 Mailbox 23 Data 1 Register */
+#define                  CAN0_MB23_DATA2  0xffc02ee8   /* CAN Controller 0 Mailbox 23 Data 2 Register */
+#define                  CAN0_MB23_DATA3  0xffc02eec   /* CAN Controller 0 Mailbox 23 Data 3 Register */
+#define                 CAN0_MB23_LENGTH  0xffc02ef0   /* CAN Controller 0 Mailbox 23 Length Register */
+#define              CAN0_MB23_TIMESTAMP  0xffc02ef4   /* CAN Controller 0 Mailbox 23 Timestamp Register */
+#define                    CAN0_MB23_ID0  0xffc02ef8   /* CAN Controller 0 Mailbox 23 ID0 Register */
+#define                    CAN0_MB23_ID1  0xffc02efc   /* CAN Controller 0 Mailbox 23 ID1 Register */
+#define                  CAN0_MB24_DATA0  0xffc02f00   /* CAN Controller 0 Mailbox 24 Data 0 Register */
+#define                  CAN0_MB24_DATA1  0xffc02f04   /* CAN Controller 0 Mailbox 24 Data 1 Register */
+#define                  CAN0_MB24_DATA2  0xffc02f08   /* CAN Controller 0 Mailbox 24 Data 2 Register */
+#define                  CAN0_MB24_DATA3  0xffc02f0c   /* CAN Controller 0 Mailbox 24 Data 3 Register */
+#define                 CAN0_MB24_LENGTH  0xffc02f10   /* CAN Controller 0 Mailbox 24 Length Register */
+#define              CAN0_MB24_TIMESTAMP  0xffc02f14   /* CAN Controller 0 Mailbox 24 Timestamp Register */
+#define                    CAN0_MB24_ID0  0xffc02f18   /* CAN Controller 0 Mailbox 24 ID0 Register */
+#define                    CAN0_MB24_ID1  0xffc02f1c   /* CAN Controller 0 Mailbox 24 ID1 Register */
+#define                  CAN0_MB25_DATA0  0xffc02f20   /* CAN Controller 0 Mailbox 25 Data 0 Register */
+#define                  CAN0_MB25_DATA1  0xffc02f24   /* CAN Controller 0 Mailbox 25 Data 1 Register */
+#define                  CAN0_MB25_DATA2  0xffc02f28   /* CAN Controller 0 Mailbox 25 Data 2 Register */
+#define                  CAN0_MB25_DATA3  0xffc02f2c   /* CAN Controller 0 Mailbox 25 Data 3 Register */
+#define                 CAN0_MB25_LENGTH  0xffc02f30   /* CAN Controller 0 Mailbox 25 Length Register */
+#define              CAN0_MB25_TIMESTAMP  0xffc02f34   /* CAN Controller 0 Mailbox 25 Timestamp Register */
+#define                    CAN0_MB25_ID0  0xffc02f38   /* CAN Controller 0 Mailbox 25 ID0 Register */
+#define                    CAN0_MB25_ID1  0xffc02f3c   /* CAN Controller 0 Mailbox 25 ID1 Register */
+#define                  CAN0_MB26_DATA0  0xffc02f40   /* CAN Controller 0 Mailbox 26 Data 0 Register */
+#define                  CAN0_MB26_DATA1  0xffc02f44   /* CAN Controller 0 Mailbox 26 Data 1 Register */
+#define                  CAN0_MB26_DATA2  0xffc02f48   /* CAN Controller 0 Mailbox 26 Data 2 Register */
+#define                  CAN0_MB26_DATA3  0xffc02f4c   /* CAN Controller 0 Mailbox 26 Data 3 Register */
+#define                 CAN0_MB26_LENGTH  0xffc02f50   /* CAN Controller 0 Mailbox 26 Length Register */
+#define              CAN0_MB26_TIMESTAMP  0xffc02f54   /* CAN Controller 0 Mailbox 26 Timestamp Register */
+#define                    CAN0_MB26_ID0  0xffc02f58   /* CAN Controller 0 Mailbox 26 ID0 Register */
+#define                    CAN0_MB26_ID1  0xffc02f5c   /* CAN Controller 0 Mailbox 26 ID1 Register */
+#define                  CAN0_MB27_DATA0  0xffc02f60   /* CAN Controller 0 Mailbox 27 Data 0 Register */
+#define                  CAN0_MB27_DATA1  0xffc02f64   /* CAN Controller 0 Mailbox 27 Data 1 Register */
+#define                  CAN0_MB27_DATA2  0xffc02f68   /* CAN Controller 0 Mailbox 27 Data 2 Register */
+#define                  CAN0_MB27_DATA3  0xffc02f6c   /* CAN Controller 0 Mailbox 27 Data 3 Register */
+#define                 CAN0_MB27_LENGTH  0xffc02f70   /* CAN Controller 0 Mailbox 27 Length Register */
+#define              CAN0_MB27_TIMESTAMP  0xffc02f74   /* CAN Controller 0 Mailbox 27 Timestamp Register */
+#define                    CAN0_MB27_ID0  0xffc02f78   /* CAN Controller 0 Mailbox 27 ID0 Register */
+#define                    CAN0_MB27_ID1  0xffc02f7c   /* CAN Controller 0 Mailbox 27 ID1 Register */
+#define                  CAN0_MB28_DATA0  0xffc02f80   /* CAN Controller 0 Mailbox 28 Data 0 Register */
+#define                  CAN0_MB28_DATA1  0xffc02f84   /* CAN Controller 0 Mailbox 28 Data 1 Register */
+#define                  CAN0_MB28_DATA2  0xffc02f88   /* CAN Controller 0 Mailbox 28 Data 2 Register */
+#define                  CAN0_MB28_DATA3  0xffc02f8c   /* CAN Controller 0 Mailbox 28 Data 3 Register */
+#define                 CAN0_MB28_LENGTH  0xffc02f90   /* CAN Controller 0 Mailbox 28 Length Register */
+#define              CAN0_MB28_TIMESTAMP  0xffc02f94   /* CAN Controller 0 Mailbox 28 Timestamp Register */
+#define                    CAN0_MB28_ID0  0xffc02f98   /* CAN Controller 0 Mailbox 28 ID0 Register */
+#define                    CAN0_MB28_ID1  0xffc02f9c   /* CAN Controller 0 Mailbox 28 ID1 Register */
+#define                  CAN0_MB29_DATA0  0xffc02fa0   /* CAN Controller 0 Mailbox 29 Data 0 Register */
+#define                  CAN0_MB29_DATA1  0xffc02fa4   /* CAN Controller 0 Mailbox 29 Data 1 Register */
+#define                  CAN0_MB29_DATA2  0xffc02fa8   /* CAN Controller 0 Mailbox 29 Data 2 Register */
+#define                  CAN0_MB29_DATA3  0xffc02fac   /* CAN Controller 0 Mailbox 29 Data 3 Register */
+#define                 CAN0_MB29_LENGTH  0xffc02fb0   /* CAN Controller 0 Mailbox 29 Length Register */
+#define              CAN0_MB29_TIMESTAMP  0xffc02fb4   /* CAN Controller 0 Mailbox 29 Timestamp Register */
+#define                    CAN0_MB29_ID0  0xffc02fb8   /* CAN Controller 0 Mailbox 29 ID0 Register */
+#define                    CAN0_MB29_ID1  0xffc02fbc   /* CAN Controller 0 Mailbox 29 ID1 Register */
+#define                  CAN0_MB30_DATA0  0xffc02fc0   /* CAN Controller 0 Mailbox 30 Data 0 Register */
+#define                  CAN0_MB30_DATA1  0xffc02fc4   /* CAN Controller 0 Mailbox 30 Data 1 Register */
+#define                  CAN0_MB30_DATA2  0xffc02fc8   /* CAN Controller 0 Mailbox 30 Data 2 Register */
+#define                  CAN0_MB30_DATA3  0xffc02fcc   /* CAN Controller 0 Mailbox 30 Data 3 Register */
+#define                 CAN0_MB30_LENGTH  0xffc02fd0   /* CAN Controller 0 Mailbox 30 Length Register */
+#define              CAN0_MB30_TIMESTAMP  0xffc02fd4   /* CAN Controller 0 Mailbox 30 Timestamp Register */
+#define                    CAN0_MB30_ID0  0xffc02fd8   /* CAN Controller 0 Mailbox 30 ID0 Register */
+#define                    CAN0_MB30_ID1  0xffc02fdc   /* CAN Controller 0 Mailbox 30 ID1 Register */
+#define                  CAN0_MB31_DATA0  0xffc02fe0   /* CAN Controller 0 Mailbox 31 Data 0 Register */
+#define                  CAN0_MB31_DATA1  0xffc02fe4   /* CAN Controller 0 Mailbox 31 Data 1 Register */
+#define                  CAN0_MB31_DATA2  0xffc02fe8   /* CAN Controller 0 Mailbox 31 Data 2 Register */
+#define                  CAN0_MB31_DATA3  0xffc02fec   /* CAN Controller 0 Mailbox 31 Data 3 Register */
+#define                 CAN0_MB31_LENGTH  0xffc02ff0   /* CAN Controller 0 Mailbox 31 Length Register */
+#define              CAN0_MB31_TIMESTAMP  0xffc02ff4   /* CAN Controller 0 Mailbox 31 Timestamp Register */
+#define                    CAN0_MB31_ID0  0xffc02ff8   /* CAN Controller 0 Mailbox 31 ID0 Register */
+#define                    CAN0_MB31_ID1  0xffc02ffc   /* CAN Controller 0 Mailbox 31 ID1 Register */
+
+/* UART3 Registers */
+
+#define                        UART3_DLL  0xffc03100   /* Divisor Latch Low Byte */
+#define                        UART3_DLH  0xffc03104   /* Divisor Latch High Byte */
+#define                       UART3_GCTL  0xffc03108   /* Global Control Register */
+#define                        UART3_LCR  0xffc0310c   /* Line Control Register */
+#define                        UART3_MCR  0xffc03110   /* Modem Control Register */
+#define                        UART3_LSR  0xffc03114   /* Line Status Register */
+#define                        UART3_MSR  0xffc03118   /* Modem Status Register */
+#define                        UART3_SCR  0xffc0311c   /* Scratch Register */
+#define                    UART3_IER_SET  0xffc03120   /* Interrupt Enable Register Set */
+#define                  UART3_IER_CLEAR  0xffc03124   /* Interrupt Enable Register Clear */
+#define                        UART3_THR  0xffc03128   /* Transmit Hold Register */
+#define                        UART3_RBR  0xffc0312c   /* Receive Buffer Register */
+
+/* NFC Registers */
+
+#define                          NFC_CTL  0xffc03b00   /* NAND Control Register */
+#define                         NFC_STAT  0xffc03b04   /* NAND Status Register */
+#define                      NFC_IRQSTAT  0xffc03b08   /* NAND Interrupt Status Register */
+#define                      NFC_IRQMASK  0xffc03b0c   /* NAND Interrupt Mask Register */
+#define                         NFC_ECC0  0xffc03b10   /* NAND ECC Register 0 */
+#define                         NFC_ECC1  0xffc03b14   /* NAND ECC Register 1 */
+#define                         NFC_ECC2  0xffc03b18   /* NAND ECC Register 2 */
+#define                         NFC_ECC3  0xffc03b1c   /* NAND ECC Register 3 */
+#define                        NFC_COUNT  0xffc03b20   /* NAND ECC Count Register */
+#define                          NFC_RST  0xffc03b24   /* NAND ECC Reset Register */
+#define                        NFC_PGCTL  0xffc03b28   /* NAND Page Control Register */
+#define                         NFC_READ  0xffc03b2c   /* NAND Read Data Register */
+#define                         NFC_ADDR  0xffc03b40   /* NAND Address Register */
+#define                          NFC_CMD  0xffc03b44   /* NAND Command Register */
+#define                      NFC_DATA_WR  0xffc03b48   /* NAND Data Write Register */
+#define                      NFC_DATA_RD  0xffc03b4c   /* NAND Data Read Register */
+
+/* Counter Registers */
+
+#define                       CNT_CONFIG  0xffc04200   /* Configuration Register */
+#define                        CNT_IMASK  0xffc04204   /* Interrupt Mask Register */
+#define                       CNT_STATUS  0xffc04208   /* Status Register */
+#define                      CNT_COMMAND  0xffc0420c   /* Command Register */
+#define                     CNT_DEBOUNCE  0xffc04210   /* Debounce Register */
+#define                      CNT_COUNTER  0xffc04214   /* Counter Register */
+#define                          CNT_MAX  0xffc04218   /* Maximal Count Register */
+#define                          CNT_MIN  0xffc0421c   /* Minimal Count Register */
+
+/* OTP/FUSE Registers */
+
+#define                      OTP_CONTROL  0xffc04300   /* OTP/Fuse Control Register */
+#define                          OTP_BEN  0xffc04304   /* OTP/Fuse Byte Enable */
+#define                       OTP_STATUS  0xffc04308   /* OTP/Fuse Status */
+#define                       OTP_TIMING  0xffc0430c   /* OTP/Fuse Access Timing */
+
+/* Security Registers */
+
+#define                    SECURE_SYSSWT  0xffc04320   /* Secure System Switches */
+#define                   SECURE_CONTROL  0xffc04324   /* Secure Control */
+#define                    SECURE_STATUS  0xffc04328   /* Secure Status */
+
+/* DMA Peripheral Mux Register */
+
+#define                    DMAC1_PERIMUX  0xffc04340   /* DMA Controller 1 Peripheral Multiplexer Register */
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define                        OTP_DATA0  0xffc04380   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA1  0xffc04384   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA2  0xffc04388   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define                        OTP_DATA3  0xffc0438c   /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+
+/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 processor */
+
+/* ********************************************************** */
+/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
+/*     and MULTI BIT READ MACROS                              */
+/* ********************************************************** */
+
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
+/* Bit masks for SIC_IAR0 */
+
+#define            PLL_WAKEUP  0x1        /* PLL Wakeup */
+
+/* Bit masks for SIC_IWR0, SIC_IMASK0, SIC_ISR0 */
+
+#define              DMA0_ERR  0x2        /* DMA Controller 0 Error */
+#define             EPPI0_ERR  0x4        /* EPPI0 Error */
+#define            SPORT0_ERR  0x8        /* SPORT0 Error */
+#define            SPORT1_ERR  0x10       /* SPORT1 Error */
+#define              SPI0_ERR  0x20       /* SPI0 Error */
+#define             UART0_ERR  0x40       /* UART0 Error */
+#define                   RTC  0x80       /* Real-Time Clock */
+#define                 DMA12  0x100      /* DMA Channel 12 */
+#define                  DMA0  0x200      /* DMA Channel 0 */
+#define                  DMA1  0x400      /* DMA Channel 1 */
+#define                  DMA2  0x800      /* DMA Channel 2 */
+#define                  DMA3  0x1000     /* DMA Channel 3 */
+#define                  DMA4  0x2000     /* DMA Channel 4 */
+#define                  DMA6  0x4000     /* DMA Channel 6 */
+#define                  DMA7  0x8000     /* DMA Channel 7 */
+#define                 PINT0  0x80000    /* Pin Interrupt 0 */
+#define                 PINT1  0x100000   /* Pin Interrupt 1 */
+#define                 MDMA0  0x200000   /* Memory DMA Stream 0 */
+#define                 MDMA1  0x400000   /* Memory DMA Stream 1 */
+#define                  WDOG  0x800000   /* Watchdog Timer */
+#define              DMA1_ERR  0x1000000  /* DMA Controller 1 Error */
+#define            SPORT2_ERR  0x2000000  /* SPORT2 Error */
+#define            SPORT3_ERR  0x4000000  /* SPORT3 Error */
+#define               MXVR_SD  0x8000000  /* MXVR Synchronous Data */
+#define              SPI1_ERR  0x10000000 /* SPI1 Error */
+#define              SPI2_ERR  0x20000000 /* SPI2 Error */
+#define             UART1_ERR  0x40000000 /* UART1 Error */
+#define             UART2_ERR  0x80000000 /* UART2 Error */
+
+/* Bit masks for SIC_IWR1, SIC_IMASK1, SIC_ISR1 */
+
+#define              CAN0_ERR  0x1        /* CAN0 Error */
+#define                 DMA18  0x2        /* DMA Channel 18 */
+#define                 DMA19  0x4        /* DMA Channel 19 */
+#define                 DMA20  0x8        /* DMA Channel 20 */
+#define                 DMA21  0x10       /* DMA Channel 21 */
+#define                 DMA13  0x20       /* DMA Channel 13 */
+#define                 DMA14  0x40       /* DMA Channel 14 */
+#define                  DMA5  0x80       /* DMA Channel 5 */
+#define                 DMA23  0x100      /* DMA Channel 23 */
+#define                  DMA8  0x200      /* DMA Channel 8 */
+#define                  DMA9  0x400      /* DMA Channel 9 */
+#define                 DMA10  0x800      /* DMA Channel 10 */
+#define                 DMA11  0x1000     /* DMA Channel 11 */
+#define                  TWI0  0x2000     /* TWI0 */
+#define                  TWI1  0x4000     /* TWI1 */
+#define               CAN0_RX  0x8000     /* CAN0 Receive */
+#define               CAN0_TX  0x10000    /* CAN0 Transmit */
+#define                 MDMA2  0x20000    /* Memory DMA Stream 0 */
+#define                 MDMA3  0x40000    /* Memory DMA Stream 1 */
+#define             MXVR_STAT  0x80000    /* MXVR Status */
+#define               MXVR_CM  0x100000   /* MXVR Control Message */
+#define               MXVR_AP  0x200000   /* MXVR Asynchronous Packet */
+#define             EPPI1_ERR  0x400000   /* EPPI1 Error */
+#define             EPPI2_ERR  0x800000   /* EPPI2 Error */
+#define             UART3_ERR  0x1000000  /* UART3 Error */
+#define              HOST_ERR  0x2000000  /* Host DMA Port Error */
+#define               USB_ERR  0x4000000  /* USB Error */
+#define              PIXC_ERR  0x8000000  /* Pixel Compositor Error */
+#define               NFC_ERR  0x10000000 /* Nand Flash Controller Error */
+#define             ATAPI_ERR  0x20000000 /* ATAPI Error */
+#define              CAN1_ERR  0x40000000 /* CAN1 Error */
+#define             DMAR0_ERR  0x80000000 /* DMAR0 Overflow Error */
+#define             DMAR1_ERR  0x80000000 /* DMAR1 Overflow Error */
+#define                 DMAR0  0x80000000 /* DMAR0 Block */
+#define                 DMAR1  0x80000000 /* DMAR1 Block */
+
+/* Bit masks for SIC_IWR2, SIC_IMASK2, SIC_ISR2 */
+
+#define                 DMA15  0x1        /* DMA Channel 15 */
+#define                 DMA16  0x2        /* DMA Channel 16 */
+#define                 DMA17  0x4        /* DMA Channel 17 */
+#define                 DMA22  0x8        /* DMA Channel 22 */
+#define                   CNT  0x10       /* Counter */
+#define                   KEY  0x20       /* Keypad */
+#define               CAN1_RX  0x40       /* CAN1 Receive */
+#define               CAN1_TX  0x80       /* CAN1 Transmit */
+#define             SDH_INT_MASK0  0x100      /* SDH Mask 0 */
+#define             SDH_INT_MASK1  0x200      /* SDH Mask 1 */
+#define              USB_EINT  0x400      /* USB Exception */
+#define              USB_INT0  0x800      /* USB Interrupt 0 */
+#define              USB_INT1  0x1000     /* USB Interrupt 1 */
+#define              USB_INT2  0x2000     /* USB Interrupt 2 */
+#define            USB_DMAINT  0x4000     /* USB DMA */
+#define                OTPSEC  0x8000     /* OTP Access Complete */
+#define                TIMER0  0x400000   /* Timer 0 */
+#define                TIMER1  0x800000   /* Timer 1 */
+#define                TIMER2  0x1000000  /* Timer 2 */
+#define                TIMER3  0x2000000  /* Timer 3 */
+#define                TIMER4  0x4000000  /* Timer 4 */
+#define                TIMER5  0x8000000  /* Timer 5 */
+#define                TIMER6  0x10000000 /* Timer 6 */
+#define                TIMER7  0x20000000 /* Timer 7 */
+#define                 PINT2  0x40000000 /* Pin Interrupt 2 */
+#define                 PINT3  0x80000000 /* Pin Interrupt 3 */
+
+/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */
+
+#define                     DMAEN  0x1        /* DMA Channel Enable */
+#define                       WNR  0x2        /* DMA Direction */
+#define                  WDSIZE_8  0x0        /* Transfer Word Size = 8 */
+#define                 WDSIZE_16  0x4        /* Transfer Word Size = 16 */
+#define                 WDSIZE_32  0x8        /* Transfer Word Size = 32 */
+#define                     DMA2D  0x10       /* DMA Mode */
+#define                   RESTART  0x20       /* Work Unit Transitions */
+#define                    DI_SEL  0x40       /* Data Interrupt Timing Select */
+#define                     DI_EN  0x80       /* Data Interrupt Enable */
+
+#define                    NDSIZE  0xf00      /* Flex Descriptor Size */
+#define                  NDSIZE_0 0x0000      /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define                  NDSIZE_1 0x0100      /* Next Descriptor Size = 1 */
+#define                  NDSIZE_2 0x0200      /* Next Descriptor Size = 2 */
+#define                  NDSIZE_3 0x0300      /* Next Descriptor Size = 3 */
+#define                  NDSIZE_4 0x0400      /* Next Descriptor Size = 4 */
+#define                  NDSIZE_5 0x0500      /* Next Descriptor Size = 5 */
+#define                  NDSIZE_6 0x0600      /* Next Descriptor Size = 6 */
+#define                  NDSIZE_7 0x0700      /* Next Descriptor Size = 7 */
+#define                  NDSIZE_8 0x0800      /* Next Descriptor Size = 8 */
+#define                  NDSIZE_9 0x0900      /* Next Descriptor Size = 9 */
+
+#define                   DMAFLOW  0xf000     /* Next Operation */
+#define              DMAFLOW_STOP  0x0000     /* Stop Mode */
+#define              DMAFLOW_AUTO  0x1000     /* Autobuffer Mode */
+#define             DMAFLOW_ARRAY  0x4000     /* Descriptor Array Mode */
+#define             DMAFLOW_SMALL  0x6000     /* Small Model Descriptor List Mode */
+#define             DMAFLOW_LARGE  0x7000     /* Large Model Descriptor List Mode */
+
+/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
+
+#define                  DMA_DONE  0x1        /* DMA Completion Interrupt Status */
+#define                   DMA_ERR  0x2        /* DMA Error Interrupt Status */
+#define                    DFETCH  0x4        /* DMA Descriptor Fetch */
+#define                   DMA_RUN  0x8        /* DMA Channel Running */
+
+/* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
+
+#define                     CTYPE  0x40       /* DMA Channel Type */
+#define                      PMAP  0xf000     /* Peripheral Mapped To This Channel */
+
+/* Bit masks for DMACx_TCPER */
+
+#define        DCB_TRAFFIC_PERIOD  0xf        /* DCB Traffic Control Period */
+#define        DEB_TRAFFIC_PERIOD  0xf0       /* DEB Traffic Control Period */
+#define        DAB_TRAFFIC_PERIOD  0x700      /* DAB Traffic Control Period */
+#define   MDMA_ROUND_ROBIN_PERIOD  0xf800     /* MDMA Round Robin Period */
+
+/* Bit masks for DMACx_TCCNT */
+
+#define         DCB_TRAFFIC_COUNT  0xf        /* DCB Traffic Control Count */
+#define         DEB_TRAFFIC_COUNT  0xf0       /* DEB Traffic Control Count */
+#define         DAB_TRAFFIC_COUNT  0x700      /* DAB Traffic Control Count */
+#define    MDMA_ROUND_ROBIN_COUNT  0xf800     /* MDMA Round Robin Count */
+
+/* Bit masks for DMAC1_PERIMUX */
+
+#define                   PMUXSDH  0x1        /* Peripheral Select for DMA22 channel */
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001		/* Enable CLKOUT									*/
+#define	AMBEN_NONE		0x0000		/* All Banks Disabled								*/
+#define AMBEN_B0		0x0002		/* Enable Async Memory Bank 0 only					*/
+#define AMBEN_B0_B1		0x0004		/* Enable Async Memory Banks 0 & 1 only				*/
+#define AMBEN_B0_B1_B2	0x0006		/* Enable Async Memory Banks 0, 1, and 2			*/
+#define AMBEN_ALL		0x0008		/* Enable Async Memory Banks (all) 0, 1, 2, and 3	*/
+
+
+/* Bit masks for EBIU_AMBCTL0 */
+
+#define                   B0RDYEN  0x1        /* Bank 0 ARDY Enable */
+#define                  B0RDYPOL  0x2        /* Bank 0 ARDY Polarity */
+#define                      B0TT  0xc        /* Bank 0 transition time */
+#define                      B0ST  0x30       /* Bank 0 Setup time */
+#define                      B0HT  0xc0       /* Bank 0 Hold time */
+#define                     B0RAT  0xf00      /* Bank 0 Read access time */
+#define                     B0WAT  0xf000     /* Bank 0 write access time */
+#define                   B1RDYEN  0x10000    /* Bank 1 ARDY Enable */
+#define                  B1RDYPOL  0x20000    /* Bank 1 ARDY Polarity */
+#define                      B1TT  0xc0000    /* Bank 1 transition time */
+#define                      B1ST  0x300000   /* Bank 1 Setup time */
+#define                      B1HT  0xc00000   /* Bank 1 Hold time */
+#define                     B1RAT  0xf000000  /* Bank 1 Read access time */
+#define                     B1WAT  0xf0000000 /* Bank 1 write access time */
+
+/* Bit masks for EBIU_AMBCTL1 */
+
+#define                   B2RDYEN  0x1        /* Bank 2 ARDY Enable */
+#define                  B2RDYPOL  0x2        /* Bank 2 ARDY Polarity */
+#define                      B2TT  0xc        /* Bank 2 transition time */
+#define                      B2ST  0x30       /* Bank 2 Setup time */
+#define                      B2HT  0xc0       /* Bank 2 Hold time */
+#define                     B2RAT  0xf00      /* Bank 2 Read access time */
+#define                     B2WAT  0xf000     /* Bank 2 write access time */
+#define                   B3RDYEN  0x10000    /* Bank 3 ARDY Enable */
+#define                  B3RDYPOL  0x20000    /* Bank 3 ARDY Polarity */
+#define                      B3TT  0xc0000    /* Bank 3 transition time */
+#define                      B3ST  0x300000   /* Bank 3 Setup time */
+#define                      B3HT  0xc00000   /* Bank 3 Hold time */
+#define                     B3RAT  0xf000000  /* Bank 3 Read access time */
+#define                     B3WAT  0xf0000000 /* Bank 3 write access time */
+
+/* Bit masks for EBIU_MBSCTL */
+
+#define                  AMSB0CTL  0x3        /* Async Memory Bank 0 select */
+#define                  AMSB1CTL  0xc        /* Async Memory Bank 1 select */
+#define                  AMSB2CTL  0x30       /* Async Memory Bank 2 select */
+#define                  AMSB3CTL  0xc0       /* Async Memory Bank 3 select */
+
+/* Bit masks for EBIU_MODE */
+
+#define                    B0MODE  0x3        /* Async Memory Bank 0 Access Mode */
+#define                    B1MODE  0xc        /* Async Memory Bank 1 Access Mode */
+#define                    B2MODE  0x30       /* Async Memory Bank 2 Access Mode */
+#define                    B3MODE  0xc0       /* Async Memory Bank 3 Access Mode */
+
+/* Bit masks for EBIU_FCTL */
+
+#define               TESTSETLOCK  0x1        /* Test set lock */
+#define                      BCLK  0x6        /* Burst clock frequency */
+#define                      PGWS  0x38       /* Page wait states */
+#define                      PGSZ  0x40       /* Page size */
+#define                      RDDL  0x380      /* Read data delay */
+
+/* Bit masks for EBIU_ARBSTAT */
+
+#define                   ARBSTAT  0x1        /* Arbitration status */
+#define                    BGSTAT  0x2        /* Bus grant status */
+
+/* Bit masks for EBIU_DDRCTL0 */
+
+#define                     TREFI  0x3fff     /* Refresh Interval */
+#define                      TRFC  0x3c000    /* Auto-refresh command period */
+#define                       TRP  0x3c0000   /* Pre charge-to-active command period */
+#define                      TRAS  0x3c00000  /* Min Active-to-pre charge time */
+#define                       TRC  0x3c000000 /* Active-to-active time */
+#define DDR_TRAS(x)		((x<<22)&TRAS)	/* DDR tRAS = (1~15) cycles */
+#define DDR_TRP(x)		((x<<18)&TRP)	/* DDR tRP = (1~15) cycles */
+#define DDR_TRC(x)		((x<<26)&TRC)	/* DDR tRC = (1~15) cycles */
+#define DDR_TRFC(x)		((x<<14)&TRFC)	/* DDR tRFC = (1~15) cycles */
+#define DDR_TREFI(x)		(x&TREFI)	/* DDR tRFC = (1~15) cycles */
+
+/* Bit masks for EBIU_DDRCTL1 */
+
+#define                      TRCD  0xf        /* Active-to-Read/write delay */
+#define                      TMRD  0xf0       /* Mode register set to active */
+#define                       TWR  0x300      /* Write Recovery time */
+#define               DDRDATWIDTH  0x3000     /* DDR data width */
+#define                  EXTBANKS  0xc000     /* External banks */
+#define               DDRDEVWIDTH  0x30000    /* DDR device width */
+#define                DDRDEVSIZE  0xc0000    /* DDR device size */
+#define                      TWTR  0xf0000000 /* Write-to-read delay */
+#define DDR_TWTR(x)		((x<<28)&TWTR)	/* DDR tWTR = (1~15) cycles */
+#define DDR_TMRD(x)		((x<<4)&TMRD)	/* DDR tMRD = (1~15) cycles */
+#define DDR_TWR(x)		((x<<8)&TWR)	/* DDR tWR = (1~15) cycles */
+#define DDR_TRCD(x)		(x&TRCD)	/* DDR tRCD = (1~15) cycles */
+#define DDR_DATWIDTH		0x2000		/* DDR data width */
+#define EXTBANK_1		0		/* 1 external bank */
+#define EXTBANK_2		0x4000		/* 2 external banks */
+#define DEVSZ_64		0x40000		/* DDR External Bank Size = 64MB */
+#define DEVSZ_128		0x80000		/* DDR External Bank Size = 128MB */
+#define DEVSZ_256		0xc0000		/* DDR External Bank Size = 256MB */
+#define DEVSZ_512		0		/* DDR External Bank Size = 512MB */
+#define DEVWD_4			0		/* DDR Device Width = 4 Bits    */
+#define DEVWD_8			0x10000		/* DDR Device Width = 8 Bits    */
+#define DEVWD_16		0x20000		/* DDR Device Width = 16 Bits    */
+
+/* Bit masks for EBIU_DDRCTL2 */
+
+#define               BURSTLENGTH  0x7        /* Burst length */
+#define                CASLATENCY  0x70       /* CAS latency */
+#define                  DLLRESET  0x100      /* DLL Reset */
+#define                      REGE  0x1000     /* Register mode enable */
+#define CL_1_5			0x50		/* DDR CAS Latency = 1.5 cycles */
+#define CL_2			0x20		/* DDR CAS Latency = 2 cycles */
+#define CL_2_5			0x60		/* DDR CAS Latency = 2.5 cycles */
+#define CL_3			0x30		/* DDR CAS Latency = 3 cycles */
+
+/* Bit masks for EBIU_DDRCTL3 */
+
+#define                      PASR  0x7        /* Partial array self-refresh */
+
+/* Bit masks for EBIU_DDRQUE */
+
+#define                DEB1_PFLEN  0x3        /* Pre fetch length for DEB1 accesses */
+#define                DEB2_PFLEN  0xc        /* Pre fetch length for DEB2 accesses */
+#define                DEB3_PFLEN  0x30       /* Pre fetch length for DEB3 accesses */
+#define          DEB_ARB_PRIORITY  0x700      /* Arbitration between DEB busses */
+#define               DEB1_URGENT  0x1000     /* DEB1 Urgent */
+#define               DEB2_URGENT  0x2000     /* DEB2 Urgent */
+#define               DEB3_URGENT  0x4000     /* DEB3 Urgent */
+
+/* Bit masks for EBIU_ERRMST */
+
+#define                DEB1_ERROR  0x1        /* DEB1 Error */
+#define                DEB2_ERROR  0x2        /* DEB2 Error */
+#define                DEB3_ERROR  0x4        /* DEB3 Error */
+#define                CORE_ERROR  0x8        /* Core error */
+#define                DEB_MERROR  0x10       /* DEB1 Error (2nd) */
+#define               DEB2_MERROR  0x20       /* DEB2 Error (2nd) */
+#define               DEB3_MERROR  0x40       /* DEB3 Error (2nd) */
+#define               CORE_MERROR  0x80       /* Core Error (2nd) */
+
+/* Bit masks for EBIU_ERRADD */
+
+#define             ERROR_ADDRESS  0xffffffff /* Error Address */
+
+/* Bit masks for EBIU_RSTCTL */
+
+#define                 DDRSRESET  0x1        /* DDR soft reset */
+#define               PFTCHSRESET  0x4        /* DDR prefetch reset */
+#define                     SRREQ  0x8        /* Self-refresh request */
+#define                     SRACK  0x10       /* Self-refresh acknowledge */
+#define                MDDRENABLE  0x20       /* Mobile DDR enable */
+
+/* Bit masks for EBIU_DDRBRC0 */
+
+#define                      BRC0  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBRC1 */
+
+#define                      BRC1  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBRC2 */
+
+#define                      BRC2  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBRC3 */
+
+#define                      BRC3  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBRC4 */
+
+#define                      BRC4  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBRC5 */
+
+#define                      BRC5  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBRC6 */
+
+#define                      BRC6  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBRC7 */
+
+#define                      BRC7  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBWC0 */
+
+#define                      BWC0  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBWC1 */
+
+#define                      BWC1  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBWC2 */
+
+#define                      BWC2  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBWC3 */
+
+#define                      BWC3  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBWC4 */
+
+#define                      BWC4  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBWC5 */
+
+#define                      BWC5  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBWC6 */
+
+#define                      BWC6  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRBWC7 */
+
+#define                      BWC7  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRACCT */
+
+#define                      ACCT  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRTACT */
+
+#define                      TECT  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRARCT */
+
+#define                      ARCT  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRGC0 */
+
+#define                       GC0  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRGC1 */
+
+#define                       GC1  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRGC2 */
+
+#define                       GC2  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRGC3 */
+
+#define                       GC3  0xffffffff /* Count */
+
+/* Bit masks for EBIU_DDRMCEN */
+
+#define                B0WCENABLE  0x1        /* Bank 0 write count enable */
+#define                B1WCENABLE  0x2        /* Bank 1 write count enable */
+#define                B2WCENABLE  0x4        /* Bank 2 write count enable */
+#define                B3WCENABLE  0x8        /* Bank 3 write count enable */
+#define                B4WCENABLE  0x10       /* Bank 4 write count enable */
+#define                B5WCENABLE  0x20       /* Bank 5 write count enable */
+#define                B6WCENABLE  0x40       /* Bank 6 write count enable */
+#define                B7WCENABLE  0x80       /* Bank 7 write count enable */
+#define                B0RCENABLE  0x100      /* Bank 0 read count enable */
+#define                B1RCENABLE  0x200      /* Bank 1 read count enable */
+#define                B2RCENABLE  0x400      /* Bank 2 read count enable */
+#define                B3RCENABLE  0x800      /* Bank 3 read count enable */
+#define                B4RCENABLE  0x1000     /* Bank 4 read count enable */
+#define                B5RCENABLE  0x2000     /* Bank 5 read count enable */
+#define                B6RCENABLE  0x4000     /* Bank 6 read count enable */
+#define                B7RCENABLE  0x8000     /* Bank 7 read count enable */
+#define             ROWACTCENABLE  0x10000    /* DDR Row activate count enable */
+#define                RWTCENABLE  0x20000    /* DDR R/W Turn around count enable */
+#define                 ARCENABLE  0x40000    /* DDR Auto-refresh count enable */
+#define                 GC0ENABLE  0x100000   /* DDR Grant count 0 enable */
+#define                 GC1ENABLE  0x200000   /* DDR Grant count 1 enable */
+#define                 GC2ENABLE  0x400000   /* DDR Grant count 2 enable */
+#define                 GC3ENABLE  0x800000   /* DDR Grant count 3 enable */
+#define                 GCCONTROL  0x3000000  /* DDR Grant Count Control */
+
+/* Bit masks for EBIU_DDRMCCL */
+
+#define                 CB0WCOUNT  0x1        /* Clear write count 0 */
+#define                 CB1WCOUNT  0x2        /* Clear write count 1 */
+#define                 CB2WCOUNT  0x4        /* Clear write count 2 */
+#define                 CB3WCOUNT  0x8        /* Clear write count 3 */
+#define                 CB4WCOUNT  0x10       /* Clear write count 4 */
+#define                 CB5WCOUNT  0x20       /* Clear write count 5 */
+#define                 CB6WCOUNT  0x40       /* Clear write count 6 */
+#define                 CB7WCOUNT  0x80       /* Clear write count 7 */
+#define                  CBRCOUNT  0x100      /* Clear read count 0 */
+#define                 CB1RCOUNT  0x200      /* Clear read count 1 */
+#define                 CB2RCOUNT  0x400      /* Clear read count 2 */
+#define                 CB3RCOUNT  0x800      /* Clear read count 3 */
+#define                 CB4RCOUNT  0x1000     /* Clear read count 4 */
+#define                 CB5RCOUNT  0x2000     /* Clear read count 5 */
+#define                 CB6RCOUNT  0x4000     /* Clear read count 6 */
+#define                 CB7RCOUNT  0x8000     /* Clear read count 7 */
+#define                  CRACOUNT  0x10000    /* Clear row activation count */
+#define                CRWTACOUNT  0x20000    /* Clear R/W turn-around count */
+#define                  CARCOUNT  0x40000    /* Clear auto-refresh count */
+#define                  CG0COUNT  0x100000   /* Clear grant count 0 */
+#define                  CG1COUNT  0x200000   /* Clear grant count 1 */
+#define                  CG2COUNT  0x400000   /* Clear grant count 2 */
+#define                  CG3COUNT  0x800000   /* Clear grant count 3 */
+
+/* Bit masks for (PORTx is PORTA - PORTJ) includes PORTx_FER, PORTx_SET, PORTx_CLEAR, PORTx_DIR_SET, PORTx_DIR_CLEAR, PORTx_INEN */
+
+#define                       Px0  0x1        /* GPIO 0 */
+#define                       Px1  0x2        /* GPIO 1 */
+#define                       Px2  0x4        /* GPIO 2 */
+#define                       Px3  0x8        /* GPIO 3 */
+#define                       Px4  0x10       /* GPIO 4 */
+#define                       Px5  0x20       /* GPIO 5 */
+#define                       Px6  0x40       /* GPIO 6 */
+#define                       Px7  0x80       /* GPIO 7 */
+#define                       Px8  0x100      /* GPIO 8 */
+#define                       Px9  0x200      /* GPIO 9 */
+#define                      Px10  0x400      /* GPIO 10 */
+#define                      Px11  0x800      /* GPIO 11 */
+#define                      Px12  0x1000     /* GPIO 12 */
+#define                      Px13  0x2000     /* GPIO 13 */
+#define                      Px14  0x4000     /* GPIO 14 */
+#define                      Px15  0x8000     /* GPIO 15 */
+
+/* Bit masks for PORTA_MUX - PORTJ_MUX */
+
+#define                      PxM0  0x3        /* GPIO Mux 0 */
+#define                      PxM1  0xc        /* GPIO Mux 1 */
+#define                      PxM2  0x30       /* GPIO Mux 2 */
+#define                      PxM3  0xc0       /* GPIO Mux 3 */
+#define                      PxM4  0x300      /* GPIO Mux 4 */
+#define                      PxM5  0xc00      /* GPIO Mux 5 */
+#define                      PxM6  0x3000     /* GPIO Mux 6 */
+#define                      PxM7  0xc000     /* GPIO Mux 7 */
+#define                      PxM8  0x30000    /* GPIO Mux 8 */
+#define                      PxM9  0xc0000    /* GPIO Mux 9 */
+#define                     PxM10  0x300000   /* GPIO Mux 10 */
+#define                     PxM11  0xc00000   /* GPIO Mux 11 */
+#define                     PxM12  0x3000000  /* GPIO Mux 12 */
+#define                     PxM13  0xc000000  /* GPIO Mux 13 */
+#define                     PxM14  0x30000000 /* GPIO Mux 14 */
+#define                     PxM15  0xc0000000 /* GPIO Mux 15 */
+
+
+/* Bit masks for PINTx_MASK_SET/CLEAR, PINTx_REQUEST, PINTx_LATCH, PINTx_EDGE_SET/CLEAR, PINTx_INVERT_SET/CLEAR, PINTx_PINTSTATE */
+
+#define                       IB0  0x1        /* Interrupt Bit 0 */
+#define                       IB1  0x2        /* Interrupt Bit 1 */
+#define                       IB2  0x4        /* Interrupt Bit 2 */
+#define                       IB3  0x8        /* Interrupt Bit 3 */
+#define                       IB4  0x10       /* Interrupt Bit 4 */
+#define                       IB5  0x20       /* Interrupt Bit 5 */
+#define                       IB6  0x40       /* Interrupt Bit 6 */
+#define                       IB7  0x80       /* Interrupt Bit 7 */
+#define                       IB8  0x100      /* Interrupt Bit 8 */
+#define                       IB9  0x200      /* Interrupt Bit 9 */
+#define                      IB10  0x400      /* Interrupt Bit 10 */
+#define                      IB11  0x800      /* Interrupt Bit 11 */
+#define                      IB12  0x1000     /* Interrupt Bit 12 */
+#define                      IB13  0x2000     /* Interrupt Bit 13 */
+#define                      IB14  0x4000     /* Interrupt Bit 14 */
+#define                      IB15  0x8000     /* Interrupt Bit 15 */
+
+/* Bit masks for TIMERx_CONFIG */
+
+#define                     TMODE  0x3        /* Timer Mode */
+#define                  PULSE_HI  0x4        /* Pulse Polarity */
+#define                PERIOD_CNT  0x8        /* Period Count */
+#define                   IRQ_ENA  0x10       /* Interrupt Request Enable */
+#define                   TIN_SEL  0x20       /* Timer Input Select */
+#define                   OUT_DIS  0x40       /* Output Pad Disable */
+#define                   CLK_SEL  0x80       /* Timer Clock Select */
+#define                 TOGGLE_HI  0x100      /* Toggle Mode */
+#define                   EMU_RUN  0x200      /* Emulation Behavior Select */
+#define                   ERR_TYP  0xc000     /* Error Type */
+
+/* Bit masks for TIMER_ENABLE0 */
+
+#define                    TIMEN0  0x1        /* Timer 0 Enable */
+#define                    TIMEN1  0x2        /* Timer 1 Enable */
+#define                    TIMEN2  0x4        /* Timer 2 Enable */
+#define                    TIMEN3  0x8        /* Timer 3 Enable */
+#define                    TIMEN4  0x10       /* Timer 4 Enable */
+#define                    TIMEN5  0x20       /* Timer 5 Enable */
+#define                    TIMEN6  0x40       /* Timer 6 Enable */
+#define                    TIMEN7  0x80       /* Timer 7 Enable */
+
+/* Bit masks for TIMER_DISABLE0 */
+
+#define                   TIMDIS0  0x1        /* Timer 0 Disable */
+#define                   TIMDIS1  0x2        /* Timer 1 Disable */
+#define                   TIMDIS2  0x4        /* Timer 2 Disable */
+#define                   TIMDIS3  0x8        /* Timer 3 Disable */
+#define                   TIMDIS4  0x10       /* Timer 4 Disable */
+#define                   TIMDIS5  0x20       /* Timer 5 Disable */
+#define                   TIMDIS6  0x40       /* Timer 6 Disable */
+#define                   TIMDIS7  0x80       /* Timer 7 Disable */
+
+/* Bit masks for TIMER_STATUS0 */
+
+#define                    TIMIL0  0x1        /* Timer 0 Interrupt */
+#define                    TIMIL1  0x2        /* Timer 1 Interrupt */
+#define                    TIMIL2  0x4        /* Timer 2 Interrupt */
+#define                    TIMIL3  0x8        /* Timer 3 Interrupt */
+#define                 TOVF_ERR0  0x10       /* Timer 0 Counter Overflow */
+#define                 TOVF_ERR1  0x20       /* Timer 1 Counter Overflow */
+#define                 TOVF_ERR2  0x40       /* Timer 2 Counter Overflow */
+#define                 TOVF_ERR3  0x80       /* Timer 3 Counter Overflow */
+#define                     TRUN0  0x1000     /* Timer 0 Slave Enable Status */
+#define                     TRUN1  0x2000     /* Timer 1 Slave Enable Status */
+#define                     TRUN2  0x4000     /* Timer 2 Slave Enable Status */
+#define                     TRUN3  0x8000     /* Timer 3 Slave Enable Status */
+#define                    TIMIL4  0x10000    /* Timer 4 Interrupt */
+#define                    TIMIL5  0x20000    /* Timer 5 Interrupt */
+#define                    TIMIL6  0x40000    /* Timer 6 Interrupt */
+#define                    TIMIL7  0x80000    /* Timer 7 Interrupt */
+#define                 TOVF_ERR4  0x100000   /* Timer 4 Counter Overflow */
+#define                 TOVF_ERR5  0x200000   /* Timer 5 Counter Overflow */
+#define                 TOVF_ERR6  0x400000   /* Timer 6 Counter Overflow */
+#define                 TOVF_ERR7  0x800000   /* Timer 7 Counter Overflow */
+#define                     TRUN4  0x10000000 /* Timer 4 Slave Enable Status */
+#define                     TRUN5  0x20000000 /* Timer 5 Slave Enable Status */
+#define                     TRUN6  0x40000000 /* Timer 6 Slave Enable Status */
+#define                     TRUN7  0x80000000 /* Timer 7 Slave Enable Status */
+
+/* Bit masks for WDOG_CTL */
+
+#define                      WDEV  0x6        /* Watchdog Event */
+#define                      WDEN  0xff0      /* Watchdog Enable */
+#define                      WDRO  0x8000     /* Watchdog Rolled Over */
+
+/* Bit masks for CNT_CONFIG */
+
+#define                      CNTE  0x1        /* Counter Enable */
+#define                      DEBE  0x2        /* Debounce Enable */
+#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
+#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
+#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
+#define                   CNTMODE  0x700      /* Counter Operating Mode */
+#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
+#define                   BNDMODE  0x3000     /* Boundary register Mode */
+#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
+
+/* Bit masks for CNT_IMASK */
+
+#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
+#define                      UCIE  0x2        /* Up count Interrupt Enable */
+#define                      DCIE  0x4        /* Down count Interrupt Enable */
+#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
+#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
+#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
+#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
+#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
+#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
+#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
+#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
+
+/* Bit masks for CNT_STATUS */
+
+#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
+#define                      UCII  0x2        /* Up count Interrupt Identifier */
+#define                      DCII  0x4        /* Down count Interrupt Identifier */
+#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
+#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
+#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
+#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
+#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
+#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
+#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
+#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
+
+/* Bit masks for CNT_COMMAND */
+
+#define                    W1LCNT  0xf        /* Load Counter Register */
+#define                    W1LMIN  0xf0       /* Load Min Register */
+#define                    W1LMAX  0xf00      /* Load Max Register */
+#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
+
+/* Bit masks for CNT_DEBOUNCE */
+
+#define                 DPRESCALE  0xf        /* Load Counter Register */
+
+/* Bit masks for RTC_STAT */
+
+#define                   SECONDS  0x3f       /* Seconds */
+#define                   MINUTES  0xfc0      /* Minutes */
+#define                     HOURS  0x1f000    /* Hours */
+#define               DAY_COUNTER  0xfffe0000 /* Day Counter */
+
+/* Bit masks for RTC_ICTL */
+
+#define STOPWATCH_INTERRUPT_ENABLE  0x1        /* Stopwatch Interrupt Enable */
+#define    ALARM_INTERRUPT_ENABLE  0x2        /* Alarm Interrupt Enable */
+#define  SECONDS_INTERRUPT_ENABLE  0x4        /* Seconds Interrupt Enable */
+#define  MINUTES_INTERRUPT_ENABLE  0x8        /* Minutes Interrupt Enable */
+#define    HOURS_INTERRUPT_ENABLE  0x10       /* Hours Interrupt Enable */
+#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE  0x20       /* 24 Hours Interrupt Enable */
+#define DAY_ALARM_INTERRUPT_ENABLE  0x40       /* Day Alarm Interrupt Enable */
+#define WRITE_COMPLETE_INTERRUPT_ENABLE  0x8000     /* Write Complete Interrupt Enable */
+
+/* Bit masks for RTC_ISTAT */
+
+#define      STOPWATCH_EVENT_FLAG  0x1        /* Stopwatch Event Flag */
+#define          ALARM_EVENT_FLAG  0x2        /* Alarm Event Flag */
+#define        SECONDS_EVENT_FLAG  0x4        /* Seconds Event Flag */
+#define        MINUTES_EVENT_FLAG  0x8        /* Minutes Event Flag */
+#define          HOURS_EVENT_FLAG  0x10       /* Hours Event Flag */
+#define TWENTY_FOUR_HOURS_EVENT_FLAG  0x20       /* 24 Hours Event Flag */
+#define      DAY_ALARM_EVENT_FLAG  0x40       /* Day Alarm Event Flag */
+#define     WRITE_PENDING__STATUS  0x4000     /* Write Pending  Status */
+#define            WRITE_COMPLETE  0x8000     /* Write Complete */
+
+/* Bit masks for RTC_SWCNT */
+
+#define           STOPWATCH_COUNT  0xffff     /* Stopwatch Count */
+
+/* Bit masks for RTC_ALARM */
+
+#define                   SECONDS  0x3f       /* Seconds */
+#define                   MINUTES  0xfc0      /* Minutes */
+#define                     HOURS  0x1f000    /* Hours */
+#define                       DAY  0xfffe0000 /* Day */
+
+/* Bit masks for RTC_PREN */
+
+#define                      PREN  0x1        /* Prescaler Enable */
+
+/* Bit masks for OTP_CONTROL */
+
+#define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
+#define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
+#define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
+#define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
+#define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
+#define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
+
+/* Bit masks for OTP_BEN */
+
+#define                      FBEN  0xffff     /* OTP/Fuse Byte Enable */
+
+/* Bit masks for OTP_STATUS */
+
+#define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
+#define                    FERROR  0x2        /* OTP/Fuse Access Error */
+#define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
+#define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
+#define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
+
+/* Bit masks for OTP_TIMING */
+
+#define                   USECDIV  0xff       /* Micro Second Divider */
+#define                   READACC  0x7f00     /* Read Access Time */
+#define                   CPUMPRL  0x38000    /* Charge Pump Release Time */
+#define                   CPUMPSU  0xc0000    /* Charge Pump Setup Time */
+#define                   CPUMPHD  0xf00000   /* Charge Pump Hold Time */
+#define                   PGMTIME  0xff000000 /* Program Time */
+
+/* Bit masks for SECURE_SYSSWT */
+
+#define                   EMUDABL  0x1        /* Emulation Disable. */
+#define                   RSTDABL  0x2        /* Reset Disable */
+#define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
+#define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
+#define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
+#define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
+#define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
+#define                    EMUOVR  0x4000     /* Emulation Override */
+#define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
+#define                    L2DABL  0x70000    /* L2 Memory Disable. */
+
+/* Bit masks for SECURE_CONTROL */
+
+#define                   SECURE0  0x1        /* SECURE 0 */
+#define                   SECURE1  0x2        /* SECURE 1 */
+#define                   SECURE2  0x4        /* SECURE 2 */
+#define                   SECURE3  0x8        /* SECURE 3 */
+
+/* Bit masks for SECURE_STATUS */
+
+#define                   SECMODE  0x3        /* Secured Mode Control State */
+#define                       NMI  0x4        /* Non Maskable Interrupt */
+#define                   AFVALID  0x8        /* Authentication Firmware Valid */
+#define                    AFEXIT  0x10       /* Authentication Firmware Exit */
+#define                   SECSTAT  0xe0       /* Secure Status */
+
+/* Bit masks for PLL_DIV */
+
+#define                      CSEL  0x30       /* Core Select */
+#define                      SSEL  0xf        /* System Select */
+#define			CSEL_DIV1	0x0000	/* CCLK = VCO / 1 */
+#define			CSEL_DIV2	0x0010	/* CCLK = VCO / 2 */
+#define			CSEL_DIV4	0x0020	/* CCLK = VCO / 4 */
+#define			CSEL_DIV8	0x0030	/* CCLK = VCO / 8 */
+
+/* Bit masks for PLL_CTL */
+
+#define                      MSEL  0x7e00     /* Multiplier Select */
+#define                    BYPASS  0x100      /* PLL Bypass Enable */
+#define              OUTPUT_DELAY  0x80       /* External Memory Output Delay Enable */
+#define               INPUT_DELAY  0x40       /* External Memory Input Delay Enable */
+#define                      PDWN  0x20       /* Power Down */
+#define                    STOPCK  0x8        /* Stop Clock */
+#define                   PLL_OFF  0x2        /* Disable PLL */
+#define                        DF  0x1        /* Divide Frequency */
+
+/* SWRST Masks */
+#define              SYSTEM_RESET 0x0007       /* Initiates A System Software Reset */
+#define              DOUBLE_FAULT 0x0008       /* Core Double Fault Causes Reset */
+#define              RESET_DOUBLE 0x2000       /* SW Reset Generated By Core Double-Fault */
+#define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
+#define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
+
+/* Bit masks for PLL_STAT */
+
+#define                PLL_LOCKED  0x20       /* PLL Locked Status */
+#define        ACTIVE_PLLDISABLED  0x4        /* Active Mode With PLL Disabled */
+#define                   FULL_ON  0x2        /* Full-On Mode */
+#define         ACTIVE_PLLENABLED  0x1        /* Active Mode With PLL Enabled */
+#define                     RTCWS  0x400      /* RTC/Reset Wake-Up Status */
+#define                     CANWS  0x800      /* CAN Wake-Up Status */
+#define                     USBWS  0x2000     /* USB Wake-Up Status */
+#define                    KPADWS  0x4000     /* Keypad Wake-Up Status */
+#define                     ROTWS  0x8000     /* Rotary Wake-Up Status */
+#define                      GPWS  0x1000     /* General-Purpose Wake-Up Status */
+
+/* Bit masks for VR_CTL */
+
+#define                      FREQ  0x3        /* Regulator Switching Frequency */
+#define                      GAIN  0xc        /* Voltage Output Level Gain */
+#define                      VLEV  0xf0       /* Internal Voltage Level */
+#define                   SCKELOW  0x8000     /* Drive SCKE Low During Reset Enable */
+#define                      WAKE  0x100      /* RTC/Reset Wake-Up Enable */
+#define                     CANWE  0x200      /* CAN0/1 Wake-Up Enable */
+#define                      GPWE  0x400      /* General-Purpose Wake-Up Enable */
+#define                     USBWE  0x800      /* USB Wake-Up Enable */
+#define                    KPADWE  0x1000     /* Keypad Wake-Up Enable */
+#define                     ROTWE  0x2000     /* Rotary Wake-Up Enable */
+
+#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+
+#define	GAIN_5			0x0000	/* GAIN = 5*/
+#define	GAIN_10			0x0004	/* GAIN = 1*/
+#define	GAIN_20			0x0008	/* GAIN = 2*/
+#define	GAIN_50			0x000C	/* GAIN = 5*/
+
+#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
+/* Bit masks for NFC_CTL */
+
+#define                    WR_DLY  0xf        /* Write Strobe Delay */
+#define                    RD_DLY  0xf0       /* Read Strobe Delay */
+#define                    NWIDTH  0x100      /* NAND Data Width */
+#define                   PG_SIZE  0x200      /* Page Size */
+
+/* Bit masks for NFC_STAT */
+
+#define                     NBUSY  0x1        /* Not Busy */
+#define                   WB_FULL  0x2        /* Write Buffer Full */
+#define                PG_WR_STAT  0x4        /* Page Write Pending */
+#define                PG_RD_STAT  0x8        /* Page Read Pending */
+#define                  WB_EMPTY  0x10       /* Write Buffer Empty */
+
+/* Bit masks for NFC_IRQSTAT */
+
+#define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
+#define                    WB_OVF  0x2        /* Write Buffer Overflow */
+#define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
+#define                    RD_RDY  0x8        /* Read Data Ready */
+#define                   WR_DONE  0x10       /* Page Write Done */
+
+/* Bit masks for NFC_IRQMASK */
+
+#define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
+#define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
+#define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
+#define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
+#define               MASK_WRDONE  0x10       /* Mask Write Done */
+
+/* Bit masks for NFC_RST */
+
+#define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
+
+/* Bit masks for NFC_PGCTL */
+
+#define               PG_RD_START  0x1        /* Page Read Start */
+#define               PG_WR_START  0x2        /* Page Write Start */
+
+/* Bit masks for NFC_ECC0 */
+
+#define                      ECC0  0x7ff      /* Parity Calculation Result0 */
+
+/* Bit masks for NFC_ECC1 */
+
+#define                      ECC1  0x7ff      /* Parity Calculation Result1 */
+
+/* Bit masks for NFC_ECC2 */
+
+#define                      ECC2  0x7ff      /* Parity Calculation Result2 */
+
+/* Bit masks for NFC_ECC3 */
+
+#define                      ECC3  0x7ff      /* Parity Calculation Result3 */
+
+/* Bit masks for NFC_COUNT */
+
+#define                    ECCCNT  0x3ff      /* Transfer Count */
+
+/* Bit masks for CAN0_CONTROL */
+
+#define                       SRS  0x1        /* Software Reset */
+#define                       DNM  0x2        /* DeviceNet Mode */
+#define                       ABO  0x4        /* Auto Bus On */
+#define                       WBA  0x10       /* Wakeup On CAN Bus Activity */
+#define                       SMR  0x20       /* Sleep Mode Request */
+#define                       CSR  0x40       /* CAN Suspend Mode Request */
+#define                       CCR  0x80       /* CAN Configuration Mode Request */
+
+/* Bit masks for CAN0_STATUS */
+
+#define                        WT  0x1        /* CAN Transmit Warning Flag */
+#define                        WR  0x2        /* CAN Receive Warning Flag */
+#define                        EP  0x4        /* CAN Error Passive Mode */
+#define                       EBO  0x8        /* CAN Error Bus Off Mode */
+#define                       CSA  0x40       /* CAN Suspend Mode Acknowledge */
+#define                       CCA  0x80       /* CAN Configuration Mode Acknowledge */
+#define                     MBPTR  0x1f00     /* Mailbox Pointer */
+#define                       TRM  0x4000     /* Transmit Mode Status */
+#define                       REC  0x8000     /* Receive Mode Status */
+
+/* Bit masks for CAN0_DEBUG */
+
+#define                       DEC  0x1        /* Disable Transmit/Receive Error Counters */
+#define                       DRI  0x2        /* Disable CANRX Input Pin */
+#define                       DTO  0x4        /* Disable CANTX Output Pin */
+#define                       DIL  0x8        /* Disable Internal Loop */
+#define                       MAA  0x10       /* Mode Auto-Acknowledge */
+#define                       MRB  0x20       /* Mode Read Back */
+#define                       CDE  0x8000     /* CAN Debug Mode Enable */
+
+/* Bit masks for CAN0_CLOCK */
+
+#define                       BRP  0x3ff      /* CAN Bit Rate Prescaler */
+
+/* Bit masks for CAN0_TIMING */
+
+#define                       SJW  0x300      /* Synchronization Jump Width */
+#define                       SAM  0x80       /* Sampling */
+#define                     TSEG2  0x70       /* Time Segment 2 */
+#define                     TSEG1  0xf        /* Time Segment 1 */
+
+/* Bit masks for CAN0_INTR */
+
+#define                     CANRX  0x80       /* Serial Input From Transceiver */
+#define                     CANTX  0x40       /* Serial Output To Transceiver */
+#define                     SMACK  0x8        /* Sleep Mode Acknowledge */
+#define                      GIRQ  0x4        /* Global Interrupt Request Status */
+#define                    MBTIRQ  0x2        /* Mailbox Transmit Interrupt Request */
+#define                    MBRIRQ  0x1        /* Mailbox Receive Interrupt Request */
+
+/* Bit masks for CAN0_GIM */
+
+#define                     EWTIM  0x1        /* Error Warning Transmit Interrupt Mask */
+#define                     EWRIM  0x2        /* Error Warning Receive Interrupt Mask */
+#define                      EPIM  0x4        /* Error Passive Interrupt Mask */
+#define                      BOIM  0x8        /* Bus Off Interrupt Mask */
+#define                      WUIM  0x10       /* Wakeup Interrupt Mask */
+#define                     UIAIM  0x20       /* Unimplemented Address Interrupt Mask */
+#define                      AAIM  0x40       /* Abort Acknowledge Interrupt Mask */
+#define                     RMLIM  0x80       /* Receive Message Lost Interrupt Mask */
+#define                     UCEIM  0x100      /* Universal Counter Exceeded Interrupt Mask */
+#define                      ADIM  0x400      /* Access Denied Interrupt Mask */
+
+/* Bit masks for CAN0_GIS */
+
+#define                     EWTIS  0x1        /* Error Warning Transmit Interrupt Status */
+#define                     EWRIS  0x2        /* Error Warning Receive Interrupt Status */
+#define                      EPIS  0x4        /* Error Passive Interrupt Status */
+#define                      BOIS  0x8        /* Bus Off Interrupt Status */
+#define                      WUIS  0x10       /* Wakeup Interrupt Status */
+#define                     UIAIS  0x20       /* Unimplemented Address Interrupt Status */
+#define                      AAIS  0x40       /* Abort Acknowledge Interrupt Status */
+#define                     RMLIS  0x80       /* Receive Message Lost Interrupt Status */
+#define                     UCEIS  0x100      /* Universal Counter Exceeded Interrupt Status */
+#define                      ADIS  0x400      /* Access Denied Interrupt Status */
+
+/* Bit masks for CAN0_GIF */
+
+#define                     EWTIF  0x1        /* Error Warning Transmit Interrupt Flag */
+#define                     EWRIF  0x2        /* Error Warning Receive Interrupt Flag */
+#define                      EPIF  0x4        /* Error Passive Interrupt Flag */
+#define                      BOIF  0x8        /* Bus Off Interrupt Flag */
+#define                      WUIF  0x10       /* Wakeup Interrupt Flag */
+#define                     UIAIF  0x20       /* Unimplemented Address Interrupt Flag */
+#define                      AAIF  0x40       /* Abort Acknowledge Interrupt Flag */
+#define                     RMLIF  0x80       /* Receive Message Lost Interrupt Flag */
+#define                     UCEIF  0x100      /* Universal Counter Exceeded Interrupt Flag */
+#define                      ADIF  0x400      /* Access Denied Interrupt Flag */
+
+/* Bit masks for CAN0_MBTD */
+
+#define                       TDR  0x80       /* Temporary Disable Request */
+#define                       TDA  0x40       /* Temporary Disable Acknowledge */
+#define                     TDPTR  0x1f       /* Temporary Disable Pointer */
+
+/* Bit masks for CAN0_UCCNF */
+
+#define                     UCCNF  0xf        /* Universal Counter Configuration */
+#define                      UCRC  0x20       /* Universal Counter Reload/Clear */
+#define                      UCCT  0x40       /* Universal Counter CAN Trigger */
+#define                       UCE  0x80       /* Universal Counter Enable */
+
+/* Bit masks for CAN0_UCCNT */
+
+#define                     UCCNT  0xffff     /* Universal Counter Count Value */
+
+/* Bit masks for CAN0_UCRC */
+
+#define                     UCVAL  0xffff     /* Universal Counter Reload/Capture Value */
+
+/* Bit masks for CAN0_CEC */
+
+#define                    RXECNT  0xff       /* Receive Error Counter */
+#define                    TXECNT  0xff00     /* Transmit Error Counter */
+
+/* Bit masks for CAN0_ESR */
+
+#define                       FER  0x80       /* Form Error */
+#define                       BEF  0x40       /* Bit Error Flag */
+#define                       SA0  0x20       /* Stuck At Dominant */
+#define                      CRCE  0x10       /* CRC Error */
+#define                       SER  0x8        /* Stuff Bit Error */
+#define                      ACKE  0x4        /* Acknowledge Error */
+
+/* Bit masks for CAN0_EWR */
+
+#define                    EWLTEC  0xff00     /* Transmit Error Warning Limit */
+#define                    EWLREC  0xff       /* Receive Error Warning Limit */
+
+/* Bit masks for CAN0_AMxx_H */
+
+#define                       FDF  0x8000     /* Filter On Data Field */
+#define                       FMD  0x4000     /* Full Mask Data */
+#define                     AMIDE  0x2000     /* Acceptance Mask Identifier Extension */
+#define                    BASEID  0x1ffc     /* Base Identifier */
+#define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
+
+/* Bit masks for CAN0_AMxx_L */
+
+#define                  EXTID_LO  0xffff     /* Extended Identifier Low Bits */
+#define                       DFM  0xffff     /* Data Field Mask */
+
+/* Bit masks for CAN0_MBxx_ID1 */
+
+#define                       AME  0x8000     /* Acceptance Mask Enable */
+#define                       RTR  0x4000     /* Remote Transmission Request */
+#define                       IDE  0x2000     /* Identifier Extension */
+#define                    BASEID  0x1ffc     /* Base Identifier */
+#define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
+
+/* Bit masks for CAN0_MBxx_ID0 */
+
+#define                  EXTID_LO  0xffff     /* Extended Identifier Low Bits */
+#define                       DFM  0xffff     /* Data Field Mask */
+
+/* Bit masks for CAN0_MBxx_TIMESTAMP */
+
+#define                       TSV  0xffff     /* Time Stamp Value */
+
+/* Bit masks for CAN0_MBxx_LENGTH */
+
+#define                       DLC  0xf        /* Data Length Code */
+
+/* Bit masks for CAN0_MBxx_DATA3 */
+
+#define                 CAN_BYTE0  0xff00     /* Data Field Byte 0 */
+#define                 CAN_BYTE1  0xff       /* Data Field Byte 1 */
+
+/* Bit masks for CAN0_MBxx_DATA2 */
+
+#define                 CAN_BYTE2  0xff00     /* Data Field Byte 2 */
+#define                 CAN_BYTE3  0xff       /* Data Field Byte 3 */
+
+/* Bit masks for CAN0_MBxx_DATA1 */
+
+#define                 CAN_BYTE4  0xff00     /* Data Field Byte 4 */
+#define                 CAN_BYTE5  0xff       /* Data Field Byte 5 */
+
+/* Bit masks for CAN0_MBxx_DATA0 */
+
+#define                 CAN_BYTE6  0xff00     /* Data Field Byte 6 */
+#define                 CAN_BYTE7  0xff       /* Data Field Byte 7 */
+
+/* Bit masks for CAN0_MC1 */
+
+#define                       MC0  0x1        /* Mailbox 0 Enable */
+#define                       MC1  0x2        /* Mailbox 1 Enable */
+#define                       MC2  0x4        /* Mailbox 2 Enable */
+#define                       MC3  0x8        /* Mailbox 3 Enable */
+#define                       MC4  0x10       /* Mailbox 4 Enable */
+#define                       MC5  0x20       /* Mailbox 5 Enable */
+#define                       MC6  0x40       /* Mailbox 6 Enable */
+#define                       MC7  0x80       /* Mailbox 7 Enable */
+#define                       MC8  0x100      /* Mailbox 8 Enable */
+#define                       MC9  0x200      /* Mailbox 9 Enable */
+#define                      MC10  0x400      /* Mailbox 10 Enable */
+#define                      MC11  0x800      /* Mailbox 11 Enable */
+#define                      MC12  0x1000     /* Mailbox 12 Enable */
+#define                      MC13  0x2000     /* Mailbox 13 Enable */
+#define                      MC14  0x4000     /* Mailbox 14 Enable */
+#define                      MC15  0x8000     /* Mailbox 15 Enable */
+
+/* Bit masks for CAN0_MC2 */
+
+#define                      MC16  0x1        /* Mailbox 16 Enable */
+#define                      MC17  0x2        /* Mailbox 17 Enable */
+#define                      MC18  0x4        /* Mailbox 18 Enable */
+#define                      MC19  0x8        /* Mailbox 19 Enable */
+#define                      MC20  0x10       /* Mailbox 20 Enable */
+#define                      MC21  0x20       /* Mailbox 21 Enable */
+#define                      MC22  0x40       /* Mailbox 22 Enable */
+#define                      MC23  0x80       /* Mailbox 23 Enable */
+#define                      MC24  0x100      /* Mailbox 24 Enable */
+#define                      MC25  0x200      /* Mailbox 25 Enable */
+#define                      MC26  0x400      /* Mailbox 26 Enable */
+#define                      MC27  0x800      /* Mailbox 27 Enable */
+#define                      MC28  0x1000     /* Mailbox 28 Enable */
+#define                      MC29  0x2000     /* Mailbox 29 Enable */
+#define                      MC30  0x4000     /* Mailbox 30 Enable */
+#define                      MC31  0x8000     /* Mailbox 31 Enable */
+
+/* Bit masks for CAN0_MD1 */
+
+#define                       MD0  0x1        /* Mailbox 0 Receive Enable */
+#define                       MD1  0x2        /* Mailbox 1 Receive Enable */
+#define                       MD2  0x4        /* Mailbox 2 Receive Enable */
+#define                       MD3  0x8        /* Mailbox 3 Receive Enable */
+#define                       MD4  0x10       /* Mailbox 4 Receive Enable */
+#define                       MD5  0x20       /* Mailbox 5 Receive Enable */
+#define                       MD6  0x40       /* Mailbox 6 Receive Enable */
+#define                       MD7  0x80       /* Mailbox 7 Receive Enable */
+#define                       MD8  0x100      /* Mailbox 8 Receive Enable */
+#define                       MD9  0x200      /* Mailbox 9 Receive Enable */
+#define                      MD10  0x400      /* Mailbox 10 Receive Enable */
+#define                      MD11  0x800      /* Mailbox 11 Receive Enable */
+#define                      MD12  0x1000     /* Mailbox 12 Receive Enable */
+#define                      MD13  0x2000     /* Mailbox 13 Receive Enable */
+#define                      MD14  0x4000     /* Mailbox 14 Receive Enable */
+#define                      MD15  0x8000     /* Mailbox 15 Receive Enable */
+
+/* Bit masks for CAN0_MD2 */
+
+#define                      MD16  0x1        /* Mailbox 16 Receive Enable */
+#define                      MD17  0x2        /* Mailbox 17 Receive Enable */
+#define                      MD18  0x4        /* Mailbox 18 Receive Enable */
+#define                      MD19  0x8        /* Mailbox 19 Receive Enable */
+#define                      MD20  0x10       /* Mailbox 20 Receive Enable */
+#define                      MD21  0x20       /* Mailbox 21 Receive Enable */
+#define                      MD22  0x40       /* Mailbox 22 Receive Enable */
+#define                      MD23  0x80       /* Mailbox 23 Receive Enable */
+#define                      MD24  0x100      /* Mailbox 24 Receive Enable */
+#define                      MD25  0x200      /* Mailbox 25 Receive Enable */
+#define                      MD26  0x400      /* Mailbox 26 Receive Enable */
+#define                      MD27  0x800      /* Mailbox 27 Receive Enable */
+#define                      MD28  0x1000     /* Mailbox 28 Receive Enable */
+#define                      MD29  0x2000     /* Mailbox 29 Receive Enable */
+#define                      MD30  0x4000     /* Mailbox 30 Receive Enable */
+#define                      MD31  0x8000     /* Mailbox 31 Receive Enable */
+
+/* Bit masks for CAN0_RMP1 */
+
+#define                      RMP0  0x1        /* Mailbox 0 Receive Message Pending */
+#define                      RMP1  0x2        /* Mailbox 1 Receive Message Pending */
+#define                      RMP2  0x4        /* Mailbox 2 Receive Message Pending */
+#define                      RMP3  0x8        /* Mailbox 3 Receive Message Pending */
+#define                      RMP4  0x10       /* Mailbox 4 Receive Message Pending */
+#define                      RMP5  0x20       /* Mailbox 5 Receive Message Pending */
+#define                      RMP6  0x40       /* Mailbox 6 Receive Message Pending */
+#define                      RMP7  0x80       /* Mailbox 7 Receive Message Pending */
+#define                      RMP8  0x100      /* Mailbox 8 Receive Message Pending */
+#define                      RMP9  0x200      /* Mailbox 9 Receive Message Pending */
+#define                     RMP10  0x400      /* Mailbox 10 Receive Message Pending */
+#define                     RMP11  0x800      /* Mailbox 11 Receive Message Pending */
+#define                     RMP12  0x1000     /* Mailbox 12 Receive Message Pending */
+#define                     RMP13  0x2000     /* Mailbox 13 Receive Message Pending */
+#define                     RMP14  0x4000     /* Mailbox 14 Receive Message Pending */
+#define                     RMP15  0x8000     /* Mailbox 15 Receive Message Pending */
+
+/* Bit masks for CAN0_RMP2 */
+
+#define                     RMP16  0x1        /* Mailbox 16 Receive Message Pending */
+#define                     RMP17  0x2        /* Mailbox 17 Receive Message Pending */
+#define                     RMP18  0x4        /* Mailbox 18 Receive Message Pending */
+#define                     RMP19  0x8        /* Mailbox 19 Receive Message Pending */
+#define                     RMP20  0x10       /* Mailbox 20 Receive Message Pending */
+#define                     RMP21  0x20       /* Mailbox 21 Receive Message Pending */
+#define                     RMP22  0x40       /* Mailbox 22 Receive Message Pending */
+#define                     RMP23  0x80       /* Mailbox 23 Receive Message Pending */
+#define                     RMP24  0x100      /* Mailbox 24 Receive Message Pending */
+#define                     RMP25  0x200      /* Mailbox 25 Receive Message Pending */
+#define                     RMP26  0x400      /* Mailbox 26 Receive Message Pending */
+#define                     RMP27  0x800      /* Mailbox 27 Receive Message Pending */
+#define                     RMP28  0x1000     /* Mailbox 28 Receive Message Pending */
+#define                     RMP29  0x2000     /* Mailbox 29 Receive Message Pending */
+#define                     RMP30  0x4000     /* Mailbox 30 Receive Message Pending */
+#define                     RMP31  0x8000     /* Mailbox 31 Receive Message Pending */
+
+/* Bit masks for CAN0_RML1 */
+
+#define                      RML0  0x1        /* Mailbox 0 Receive Message Lost */
+#define                      RML1  0x2        /* Mailbox 1 Receive Message Lost */
+#define                      RML2  0x4        /* Mailbox 2 Receive Message Lost */
+#define                      RML3  0x8        /* Mailbox 3 Receive Message Lost */
+#define                      RML4  0x10       /* Mailbox 4 Receive Message Lost */
+#define                      RML5  0x20       /* Mailbox 5 Receive Message Lost */
+#define                      RML6  0x40       /* Mailbox 6 Receive Message Lost */
+#define                      RML7  0x80       /* Mailbox 7 Receive Message Lost */
+#define                      RML8  0x100      /* Mailbox 8 Receive Message Lost */
+#define                      RML9  0x200      /* Mailbox 9 Receive Message Lost */
+#define                     RML10  0x400      /* Mailbox 10 Receive Message Lost */
+#define                     RML11  0x800      /* Mailbox 11 Receive Message Lost */
+#define                     RML12  0x1000     /* Mailbox 12 Receive Message Lost */
+#define                     RML13  0x2000     /* Mailbox 13 Receive Message Lost */
+#define                     RML14  0x4000     /* Mailbox 14 Receive Message Lost */
+#define                     RML15  0x8000     /* Mailbox 15 Receive Message Lost */
+
+/* Bit masks for CAN0_RML2 */
+
+#define                     RML16  0x1        /* Mailbox 16 Receive Message Lost */
+#define                     RML17  0x2        /* Mailbox 17 Receive Message Lost */
+#define                     RML18  0x4        /* Mailbox 18 Receive Message Lost */
+#define                     RML19  0x8        /* Mailbox 19 Receive Message Lost */
+#define                     RML20  0x10       /* Mailbox 20 Receive Message Lost */
+#define                     RML21  0x20       /* Mailbox 21 Receive Message Lost */
+#define                     RML22  0x40       /* Mailbox 22 Receive Message Lost */
+#define                     RML23  0x80       /* Mailbox 23 Receive Message Lost */
+#define                     RML24  0x100      /* Mailbox 24 Receive Message Lost */
+#define                     RML25  0x200      /* Mailbox 25 Receive Message Lost */
+#define                     RML26  0x400      /* Mailbox 26 Receive Message Lost */
+#define                     RML27  0x800      /* Mailbox 27 Receive Message Lost */
+#define                     RML28  0x1000     /* Mailbox 28 Receive Message Lost */
+#define                     RML29  0x2000     /* Mailbox 29 Receive Message Lost */
+#define                     RML30  0x4000     /* Mailbox 30 Receive Message Lost */
+#define                     RML31  0x8000     /* Mailbox 31 Receive Message Lost */
+
+/* Bit masks for CAN0_OPSS1 */
+
+#define                     OPSS0  0x1        /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS1  0x2        /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS2  0x4        /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS3  0x8        /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS4  0x10       /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS5  0x20       /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS6  0x40       /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS7  0x80       /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS8  0x100      /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */
+#define                     OPSS9  0x200      /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS10  0x400      /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS11  0x800      /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS12  0x1000     /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS13  0x2000     /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS14  0x4000     /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS15  0x8000     /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */
+
+/* Bit masks for CAN0_OPSS2 */
+
+#define                    OPSS16  0x1        /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS17  0x2        /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS18  0x4        /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS19  0x8        /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS20  0x10       /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS21  0x20       /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS22  0x40       /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS23  0x80       /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS24  0x100      /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS25  0x200      /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS26  0x400      /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS27  0x800      /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS28  0x1000     /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS29  0x2000     /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS30  0x4000     /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */
+#define                    OPSS31  0x8000     /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */
+
+/* Bit masks for CAN0_TRS1 */
+
+#define                      TRS0  0x1        /* Mailbox 0 Transmit Request Set */
+#define                      TRS1  0x2        /* Mailbox 1 Transmit Request Set */
+#define                      TRS2  0x4        /* Mailbox 2 Transmit Request Set */
+#define                      TRS3  0x8        /* Mailbox 3 Transmit Request Set */
+#define                      TRS4  0x10       /* Mailbox 4 Transmit Request Set */
+#define                      TRS5  0x20       /* Mailbox 5 Transmit Request Set */
+#define                      TRS6  0x40       /* Mailbox 6 Transmit Request Set */
+#define                      TRS7  0x80       /* Mailbox 7 Transmit Request Set */
+#define                      TRS8  0x100      /* Mailbox 8 Transmit Request Set */
+#define                      TRS9  0x200      /* Mailbox 9 Transmit Request Set */
+#define                     TRS10  0x400      /* Mailbox 10 Transmit Request Set */
+#define                     TRS11  0x800      /* Mailbox 11 Transmit Request Set */
+#define                     TRS12  0x1000     /* Mailbox 12 Transmit Request Set */
+#define                     TRS13  0x2000     /* Mailbox 13 Transmit Request Set */
+#define                     TRS14  0x4000     /* Mailbox 14 Transmit Request Set */
+#define                     TRS15  0x8000     /* Mailbox 15 Transmit Request Set */
+
+/* Bit masks for CAN0_TRS2 */
+
+#define                     TRS16  0x1        /* Mailbox 16 Transmit Request Set */
+#define                     TRS17  0x2        /* Mailbox 17 Transmit Request Set */
+#define                     TRS18  0x4        /* Mailbox 18 Transmit Request Set */
+#define                     TRS19  0x8        /* Mailbox 19 Transmit Request Set */
+#define                     TRS20  0x10       /* Mailbox 20 Transmit Request Set */
+#define                     TRS21  0x20       /* Mailbox 21 Transmit Request Set */
+#define                     TRS22  0x40       /* Mailbox 22 Transmit Request Set */
+#define                     TRS23  0x80       /* Mailbox 23 Transmit Request Set */
+#define                     TRS24  0x100      /* Mailbox 24 Transmit Request Set */
+#define                     TRS25  0x200      /* Mailbox 25 Transmit Request Set */
+#define                     TRS26  0x400      /* Mailbox 26 Transmit Request Set */
+#define                     TRS27  0x800      /* Mailbox 27 Transmit Request Set */
+#define                     TRS28  0x1000     /* Mailbox 28 Transmit Request Set */
+#define                     TRS29  0x2000     /* Mailbox 29 Transmit Request Set */
+#define                     TRS30  0x4000     /* Mailbox 30 Transmit Request Set */
+#define                     TRS31  0x8000     /* Mailbox 31 Transmit Request Set */
+
+/* Bit masks for CAN0_TRR1 */
+
+#define                      TRR0  0x1        /* Mailbox 0 Transmit Request Reset */
+#define                      TRR1  0x2        /* Mailbox 1 Transmit Request Reset */
+#define                      TRR2  0x4        /* Mailbox 2 Transmit Request Reset */
+#define                      TRR3  0x8        /* Mailbox 3 Transmit Request Reset */
+#define                      TRR4  0x10       /* Mailbox 4 Transmit Request Reset */
+#define                      TRR5  0x20       /* Mailbox 5 Transmit Request Reset */
+#define                      TRR6  0x40       /* Mailbox 6 Transmit Request Reset */
+#define                      TRR7  0x80       /* Mailbox 7 Transmit Request Reset */
+#define                      TRR8  0x100      /* Mailbox 8 Transmit Request Reset */
+#define                      TRR9  0x200      /* Mailbox 9 Transmit Request Reset */
+#define                     TRR10  0x400      /* Mailbox 10 Transmit Request Reset */
+#define                     TRR11  0x800      /* Mailbox 11 Transmit Request Reset */
+#define                     TRR12  0x1000     /* Mailbox 12 Transmit Request Reset */
+#define                     TRR13  0x2000     /* Mailbox 13 Transmit Request Reset */
+#define                     TRR14  0x4000     /* Mailbox 14 Transmit Request Reset */
+#define                     TRR15  0x8000     /* Mailbox 15 Transmit Request Reset */
+
+/* Bit masks for CAN0_TRR2 */
+
+#define                     TRR16  0x1        /* Mailbox 16 Transmit Request Reset */
+#define                     TRR17  0x2        /* Mailbox 17 Transmit Request Reset */
+#define                     TRR18  0x4        /* Mailbox 18 Transmit Request Reset */
+#define                     TRR19  0x8        /* Mailbox 19 Transmit Request Reset */
+#define                     TRR20  0x10       /* Mailbox 20 Transmit Request Reset */
+#define                     TRR21  0x20       /* Mailbox 21 Transmit Request Reset */
+#define                     TRR22  0x40       /* Mailbox 22 Transmit Request Reset */
+#define                     TRR23  0x80       /* Mailbox 23 Transmit Request Reset */
+#define                     TRR24  0x100      /* Mailbox 24 Transmit Request Reset */
+#define                     TRR25  0x200      /* Mailbox 25 Transmit Request Reset */
+#define                     TRR26  0x400      /* Mailbox 26 Transmit Request Reset */
+#define                     TRR27  0x800      /* Mailbox 27 Transmit Request Reset */
+#define                     TRR28  0x1000     /* Mailbox 28 Transmit Request Reset */
+#define                     TRR29  0x2000     /* Mailbox 29 Transmit Request Reset */
+#define                     TRR30  0x4000     /* Mailbox 30 Transmit Request Reset */
+#define                     TRR31  0x8000     /* Mailbox 31 Transmit Request Reset */
+
+/* Bit masks for CAN0_AA1 */
+
+#define                       AA0  0x1        /* Mailbox 0 Abort Acknowledge */
+#define                       AA1  0x2        /* Mailbox 1 Abort Acknowledge */
+#define                       AA2  0x4        /* Mailbox 2 Abort Acknowledge */
+#define                       AA3  0x8        /* Mailbox 3 Abort Acknowledge */
+#define                       AA4  0x10       /* Mailbox 4 Abort Acknowledge */
+#define                       AA5  0x20       /* Mailbox 5 Abort Acknowledge */
+#define                       AA6  0x40       /* Mailbox 6 Abort Acknowledge */
+#define                       AA7  0x80       /* Mailbox 7 Abort Acknowledge */
+#define                       AA8  0x100      /* Mailbox 8 Abort Acknowledge */
+#define                       AA9  0x200      /* Mailbox 9 Abort Acknowledge */
+#define                      AA10  0x400      /* Mailbox 10 Abort Acknowledge */
+#define                      AA11  0x800      /* Mailbox 11 Abort Acknowledge */
+#define                      AA12  0x1000     /* Mailbox 12 Abort Acknowledge */
+#define                      AA13  0x2000     /* Mailbox 13 Abort Acknowledge */
+#define                      AA14  0x4000     /* Mailbox 14 Abort Acknowledge */
+#define                      AA15  0x8000     /* Mailbox 15 Abort Acknowledge */
+
+/* Bit masks for CAN0_AA2 */
+
+#define                      AA16  0x1        /* Mailbox 16 Abort Acknowledge */
+#define                      AA17  0x2        /* Mailbox 17 Abort Acknowledge */
+#define                      AA18  0x4        /* Mailbox 18 Abort Acknowledge */
+#define                      AA19  0x8        /* Mailbox 19 Abort Acknowledge */
+#define                      AA20  0x10       /* Mailbox 20 Abort Acknowledge */
+#define                      AA21  0x20       /* Mailbox 21 Abort Acknowledge */
+#define                      AA22  0x40       /* Mailbox 22 Abort Acknowledge */
+#define                      AA23  0x80       /* Mailbox 23 Abort Acknowledge */
+#define                      AA24  0x100      /* Mailbox 24 Abort Acknowledge */
+#define                      AA25  0x200      /* Mailbox 25 Abort Acknowledge */
+#define                      AA26  0x400      /* Mailbox 26 Abort Acknowledge */
+#define                      AA27  0x800      /* Mailbox 27 Abort Acknowledge */
+#define                      AA28  0x1000     /* Mailbox 28 Abort Acknowledge */
+#define                      AA29  0x2000     /* Mailbox 29 Abort Acknowledge */
+#define                      AA30  0x4000     /* Mailbox 30 Abort Acknowledge */
+#define                      AA31  0x8000     /* Mailbox 31 Abort Acknowledge */
+
+/* Bit masks for CAN0_TA1 */
+
+#define                       TA0  0x1        /* Mailbox 0 Transmit Acknowledge */
+#define                       TA1  0x2        /* Mailbox 1 Transmit Acknowledge */
+#define                       TA2  0x4        /* Mailbox 2 Transmit Acknowledge */
+#define                       TA3  0x8        /* Mailbox 3 Transmit Acknowledge */
+#define                       TA4  0x10       /* Mailbox 4 Transmit Acknowledge */
+#define                       TA5  0x20       /* Mailbox 5 Transmit Acknowledge */
+#define                       TA6  0x40       /* Mailbox 6 Transmit Acknowledge */
+#define                       TA7  0x80       /* Mailbox 7 Transmit Acknowledge */
+#define                       TA8  0x100      /* Mailbox 8 Transmit Acknowledge */
+#define                       TA9  0x200      /* Mailbox 9 Transmit Acknowledge */
+#define                      TA10  0x400      /* Mailbox 10 Transmit Acknowledge */
+#define                      TA11  0x800      /* Mailbox 11 Transmit Acknowledge */
+#define                      TA12  0x1000     /* Mailbox 12 Transmit Acknowledge */
+#define                      TA13  0x2000     /* Mailbox 13 Transmit Acknowledge */
+#define                      TA14  0x4000     /* Mailbox 14 Transmit Acknowledge */
+#define                      TA15  0x8000     /* Mailbox 15 Transmit Acknowledge */
+
+/* Bit masks for CAN0_TA2 */
+
+#define                      TA16  0x1        /* Mailbox 16 Transmit Acknowledge */
+#define                      TA17  0x2        /* Mailbox 17 Transmit Acknowledge */
+#define                      TA18  0x4        /* Mailbox 18 Transmit Acknowledge */
+#define                      TA19  0x8        /* Mailbox 19 Transmit Acknowledge */
+#define                      TA20  0x10       /* Mailbox 20 Transmit Acknowledge */
+#define                      TA21  0x20       /* Mailbox 21 Transmit Acknowledge */
+#define                      TA22  0x40       /* Mailbox 22 Transmit Acknowledge */
+#define                      TA23  0x80       /* Mailbox 23 Transmit Acknowledge */
+#define                      TA24  0x100      /* Mailbox 24 Transmit Acknowledge */
+#define                      TA25  0x200      /* Mailbox 25 Transmit Acknowledge */
+#define                      TA26  0x400      /* Mailbox 26 Transmit Acknowledge */
+#define                      TA27  0x800      /* Mailbox 27 Transmit Acknowledge */
+#define                      TA28  0x1000     /* Mailbox 28 Transmit Acknowledge */
+#define                      TA29  0x2000     /* Mailbox 29 Transmit Acknowledge */
+#define                      TA30  0x4000     /* Mailbox 30 Transmit Acknowledge */
+#define                      TA31  0x8000     /* Mailbox 31 Transmit Acknowledge */
+
+/* Bit masks for CAN0_RFH1 */
+
+#define                      RFH0  0x1        /* Mailbox 0 Remote Frame Handling Enable */
+#define                      RFH1  0x2        /* Mailbox 1 Remote Frame Handling Enable */
+#define                      RFH2  0x4        /* Mailbox 2 Remote Frame Handling Enable */
+#define                      RFH3  0x8        /* Mailbox 3 Remote Frame Handling Enable */
+#define                      RFH4  0x10       /* Mailbox 4 Remote Frame Handling Enable */
+#define                      RFH5  0x20       /* Mailbox 5 Remote Frame Handling Enable */
+#define                      RFH6  0x40       /* Mailbox 6 Remote Frame Handling Enable */
+#define                      RFH7  0x80       /* Mailbox 7 Remote Frame Handling Enable */
+#define                      RFH8  0x100      /* Mailbox 8 Remote Frame Handling Enable */
+#define                      RFH9  0x200      /* Mailbox 9 Remote Frame Handling Enable */
+#define                     RFH10  0x400      /* Mailbox 10 Remote Frame Handling Enable */
+#define                     RFH11  0x800      /* Mailbox 11 Remote Frame Handling Enable */
+#define                     RFH12  0x1000     /* Mailbox 12 Remote Frame Handling Enable */
+#define                     RFH13  0x2000     /* Mailbox 13 Remote Frame Handling Enable */
+#define                     RFH14  0x4000     /* Mailbox 14 Remote Frame Handling Enable */
+#define                     RFH15  0x8000     /* Mailbox 15 Remote Frame Handling Enable */
+
+/* Bit masks for CAN0_RFH2 */
+
+#define                     RFH16  0x1        /* Mailbox 16 Remote Frame Handling Enable */
+#define                     RFH17  0x2        /* Mailbox 17 Remote Frame Handling Enable */
+#define                     RFH18  0x4        /* Mailbox 18 Remote Frame Handling Enable */
+#define                     RFH19  0x8        /* Mailbox 19 Remote Frame Handling Enable */
+#define                     RFH20  0x10       /* Mailbox 20 Remote Frame Handling Enable */
+#define                     RFH21  0x20       /* Mailbox 21 Remote Frame Handling Enable */
+#define                     RFH22  0x40       /* Mailbox 22 Remote Frame Handling Enable */
+#define                     RFH23  0x80       /* Mailbox 23 Remote Frame Handling Enable */
+#define                     RFH24  0x100      /* Mailbox 24 Remote Frame Handling Enable */
+#define                     RFH25  0x200      /* Mailbox 25 Remote Frame Handling Enable */
+#define                     RFH26  0x400      /* Mailbox 26 Remote Frame Handling Enable */
+#define                     RFH27  0x800      /* Mailbox 27 Remote Frame Handling Enable */
+#define                     RFH28  0x1000     /* Mailbox 28 Remote Frame Handling Enable */
+#define                     RFH29  0x2000     /* Mailbox 29 Remote Frame Handling Enable */
+#define                     RFH30  0x4000     /* Mailbox 30 Remote Frame Handling Enable */
+#define                     RFH31  0x8000     /* Mailbox 31 Remote Frame Handling Enable */
+
+/* Bit masks for CAN0_MBIM1 */
+
+#define                     MBIM0  0x1        /* Mailbox 0 Mailbox Interrupt Mask */
+#define                     MBIM1  0x2        /* Mailbox 1 Mailbox Interrupt Mask */
+#define                     MBIM2  0x4        /* Mailbox 2 Mailbox Interrupt Mask */
+#define                     MBIM3  0x8        /* Mailbox 3 Mailbox Interrupt Mask */
+#define                     MBIM4  0x10       /* Mailbox 4 Mailbox Interrupt Mask */
+#define                     MBIM5  0x20       /* Mailbox 5 Mailbox Interrupt Mask */
+#define                     MBIM6  0x40       /* Mailbox 6 Mailbox Interrupt Mask */
+#define                     MBIM7  0x80       /* Mailbox 7 Mailbox Interrupt Mask */
+#define                     MBIM8  0x100      /* Mailbox 8 Mailbox Interrupt Mask */
+#define                     MBIM9  0x200      /* Mailbox 9 Mailbox Interrupt Mask */
+#define                    MBIM10  0x400      /* Mailbox 10 Mailbox Interrupt Mask */
+#define                    MBIM11  0x800      /* Mailbox 11 Mailbox Interrupt Mask */
+#define                    MBIM12  0x1000     /* Mailbox 12 Mailbox Interrupt Mask */
+#define                    MBIM13  0x2000     /* Mailbox 13 Mailbox Interrupt Mask */
+#define                    MBIM14  0x4000     /* Mailbox 14 Mailbox Interrupt Mask */
+#define                    MBIM15  0x8000     /* Mailbox 15 Mailbox Interrupt Mask */
+
+/* Bit masks for CAN0_MBIM2 */
+
+#define                    MBIM16  0x1        /* Mailbox 16 Mailbox Interrupt Mask */
+#define                    MBIM17  0x2        /* Mailbox 17 Mailbox Interrupt Mask */
+#define                    MBIM18  0x4        /* Mailbox 18 Mailbox Interrupt Mask */
+#define                    MBIM19  0x8        /* Mailbox 19 Mailbox Interrupt Mask */
+#define                    MBIM20  0x10       /* Mailbox 20 Mailbox Interrupt Mask */
+#define                    MBIM21  0x20       /* Mailbox 21 Mailbox Interrupt Mask */
+#define                    MBIM22  0x40       /* Mailbox 22 Mailbox Interrupt Mask */
+#define                    MBIM23  0x80       /* Mailbox 23 Mailbox Interrupt Mask */
+#define                    MBIM24  0x100      /* Mailbox 24 Mailbox Interrupt Mask */
+#define                    MBIM25  0x200      /* Mailbox 25 Mailbox Interrupt Mask */
+#define                    MBIM26  0x400      /* Mailbox 26 Mailbox Interrupt Mask */
+#define                    MBIM27  0x800      /* Mailbox 27 Mailbox Interrupt Mask */
+#define                    MBIM28  0x1000     /* Mailbox 28 Mailbox Interrupt Mask */
+#define                    MBIM29  0x2000     /* Mailbox 29 Mailbox Interrupt Mask */
+#define                    MBIM30  0x4000     /* Mailbox 30 Mailbox Interrupt Mask */
+#define                    MBIM31  0x8000     /* Mailbox 31 Mailbox Interrupt Mask */
+
+/* Bit masks for CAN0_MBTIF1 */
+
+#define                    MBTIF0  0x1        /* Mailbox 0 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF1  0x2        /* Mailbox 1 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF2  0x4        /* Mailbox 2 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF3  0x8        /* Mailbox 3 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF4  0x10       /* Mailbox 4 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF5  0x20       /* Mailbox 5 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF6  0x40       /* Mailbox 6 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF7  0x80       /* Mailbox 7 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF8  0x100      /* Mailbox 8 Mailbox Transmit Interrupt Flag */
+#define                    MBTIF9  0x200      /* Mailbox 9 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF10  0x400      /* Mailbox 10 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF11  0x800      /* Mailbox 11 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF12  0x1000     /* Mailbox 12 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF13  0x2000     /* Mailbox 13 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF14  0x4000     /* Mailbox 14 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF15  0x8000     /* Mailbox 15 Mailbox Transmit Interrupt Flag */
+
+/* Bit masks for CAN0_MBTIF2 */
+
+#define                   MBTIF16  0x1        /* Mailbox 16 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF17  0x2        /* Mailbox 17 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF18  0x4        /* Mailbox 18 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF19  0x8        /* Mailbox 19 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF20  0x10       /* Mailbox 20 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF21  0x20       /* Mailbox 21 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF22  0x40       /* Mailbox 22 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF23  0x80       /* Mailbox 23 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF24  0x100      /* Mailbox 24 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF25  0x200      /* Mailbox 25 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF26  0x400      /* Mailbox 26 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF27  0x800      /* Mailbox 27 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF28  0x1000     /* Mailbox 28 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF29  0x2000     /* Mailbox 29 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF30  0x4000     /* Mailbox 30 Mailbox Transmit Interrupt Flag */
+#define                   MBTIF31  0x8000     /* Mailbox 31 Mailbox Transmit Interrupt Flag */
+
+/* Bit masks for CAN0_MBRIF1 */
+
+#define                    MBRIF0  0x1        /* Mailbox 0 Mailbox Receive Interrupt Flag */
+#define                    MBRIF1  0x2        /* Mailbox 1 Mailbox Receive Interrupt Flag */
+#define                    MBRIF2  0x4        /* Mailbox 2 Mailbox Receive Interrupt Flag */
+#define                    MBRIF3  0x8        /* Mailbox 3 Mailbox Receive Interrupt Flag */
+#define                    MBRIF4  0x10       /* Mailbox 4 Mailbox Receive Interrupt Flag */
+#define                    MBRIF5  0x20       /* Mailbox 5 Mailbox Receive Interrupt Flag */
+#define                    MBRIF6  0x40       /* Mailbox 6 Mailbox Receive Interrupt Flag */
+#define                    MBRIF7  0x80       /* Mailbox 7 Mailbox Receive Interrupt Flag */
+#define                    MBRIF8  0x100      /* Mailbox 8 Mailbox Receive Interrupt Flag */
+#define                    MBRIF9  0x200      /* Mailbox 9 Mailbox Receive Interrupt Flag */
+#define                   MBRIF10  0x400      /* Mailbox 10 Mailbox Receive Interrupt Flag */
+#define                   MBRIF11  0x800      /* Mailbox 11 Mailbox Receive Interrupt Flag */
+#define                   MBRIF12  0x1000     /* Mailbox 12 Mailbox Receive Interrupt Flag */
+#define                   MBRIF13  0x2000     /* Mailbox 13 Mailbox Receive Interrupt Flag */
+#define                   MBRIF14  0x4000     /* Mailbox 14 Mailbox Receive Interrupt Flag */
+#define                   MBRIF15  0x8000     /* Mailbox 15 Mailbox Receive Interrupt Flag */
+
+/* Bit masks for CAN0_MBRIF2 */
+
+#define                   MBRIF16  0x1        /* Mailbox 16 Mailbox Receive Interrupt Flag */
+#define                   MBRIF17  0x2        /* Mailbox 17 Mailbox Receive Interrupt Flag */
+#define                   MBRIF18  0x4        /* Mailbox 18 Mailbox Receive Interrupt Flag */
+#define                   MBRIF19  0x8        /* Mailbox 19 Mailbox Receive Interrupt Flag */
+#define                   MBRIF20  0x10       /* Mailbox 20 Mailbox Receive Interrupt Flag */
+#define                   MBRIF21  0x20       /* Mailbox 21 Mailbox Receive Interrupt Flag */
+#define                   MBRIF22  0x40       /* Mailbox 22 Mailbox Receive Interrupt Flag */
+#define                   MBRIF23  0x80       /* Mailbox 23 Mailbox Receive Interrupt Flag */
+#define                   MBRIF24  0x100      /* Mailbox 24 Mailbox Receive Interrupt Flag */
+#define                   MBRIF25  0x200      /* Mailbox 25 Mailbox Receive Interrupt Flag */
+#define                   MBRIF26  0x400      /* Mailbox 26 Mailbox Receive Interrupt Flag */
+#define                   MBRIF27  0x800      /* Mailbox 27 Mailbox Receive Interrupt Flag */
+#define                   MBRIF28  0x1000     /* Mailbox 28 Mailbox Receive Interrupt Flag */
+#define                   MBRIF29  0x2000     /* Mailbox 29 Mailbox Receive Interrupt Flag */
+#define                   MBRIF30  0x4000     /* Mailbox 30 Mailbox Receive Interrupt Flag */
+#define                   MBRIF31  0x8000     /* Mailbox 31 Mailbox Receive Interrupt Flag */
+
+/* Bit masks for EPPIx_STATUS */
+
+#define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
+#define                 YFIFO_ERR  0x2        /* Luma FIFO Error */
+#define                 LTERR_OVR  0x4        /* Line Track Overflow */
+#define                LTERR_UNDR  0x8        /* Line Track Underflow */
+#define                 FTERR_OVR  0x10       /* Frame Track Overflow */
+#define                FTERR_UNDR  0x20       /* Frame Track Underflow */
+#define                  ERR_NCOR  0x40       /* Preamble Error Not Corrected */
+#define                   DMA1URQ  0x80       /* DMA1 Urgent Request */
+#define                   DMA0URQ  0x100      /* DMA0 Urgent Request */
+#define                   ERR_DET  0x4000     /* Preamble Error Detected */
+#define                       FLD  0x8000     /* Field */
+
+/* Bit masks for EPPIx_CONTROL */
+
+#define                   EPPI_EN  0x1        /* Enable */
+#define                  EPPI_DIR  0x2        /* Direction */
+#define                  XFR_TYPE  0xc        /* Operating Mode */
+#define                    FS_CFG  0x30       /* Frame Sync Configuration */
+#define                   FLD_SEL  0x40       /* Field Select/Trigger */
+#define                  ITU_TYPE  0x80       /* ITU Interlaced or Progressive */
+#define                  BLANKGEN  0x100      /* ITU Output Mode with Internal Blanking Generation */
+#define                   ICLKGEN  0x200      /* Internal Clock Generation */
+#define                    IFSGEN  0x400      /* Internal Frame Sync Generation */
+#define                      POLC  0x1800     /* Frame Sync and Data Driving/Sampling Edges */
+#define                      POLS  0x6000     /* Frame Sync Polarity */
+#define                   DLENGTH  0x38000    /* Data Length */
+#define                   SKIP_EN  0x40000    /* Skip Enable */
+#define                   SKIP_EO  0x80000    /* Skip Even or Odd */
+#define                    PACKEN  0x100000   /* Packing/Unpacking Enable */
+#define                    SWAPEN  0x200000   /* Swap Enable */
+#define                  SIGN_EXT  0x400000   /* Sign Extension or Zero-filled / Data Split Format */
+#define             SPLT_EVEN_ODD  0x800000   /* Split Even and Odd Data Samples */
+#define               SUBSPLT_ODD  0x1000000  /* Sub-split Odd Samples */
+#define                    DMACFG  0x2000000  /* One or Two DMA Channels Mode */
+#define                RGB_FMT_EN  0x4000000  /* RGB Formatting Enable */
+#define                  FIFO_RWM  0x18000000 /* FIFO Regular Watermarks */
+#define                  FIFO_UWM  0x60000000 /* FIFO Urgent Watermarks */
+
+#define DLEN_8		(0 << 15) /* 000 - 8 bits */
+#define DLEN_10		(1 << 15) /* 001 - 10 bits */
+#define DLEN_12		(2 << 15) /* 010 - 12 bits */
+#define DLEN_14		(3 << 15) /* 011 - 14 bits */
+#define DLEN_16		(4 << 15) /* 100 - 16 bits */
+#define DLEN_18		(5 << 15) /* 101 - 18 bits */
+#define DLEN_24		(6 << 15) /* 110 - 24 bits */
+
+
+/* Bit masks for EPPIx_FS2W_LVB */
+
+#define                   F1VB_BD  0xff       /* Vertical Blanking before Field 1 Active Data */
+#define                   F1VB_AD  0xff00     /* Vertical Blanking after Field 1 Active Data */
+#define                   F2VB_BD  0xff0000   /* Vertical Blanking before Field 2 Active Data */
+#define                   F2VB_AD  0xff000000 /* Vertical Blanking after Field 2 Active Data */
+
+/* Bit masks for EPPIx_FS2W_LAVF */
+
+#define                    F1_ACT  0xffff     /* Number of Lines of Active Data in Field 1 */
+#define                    F2_ACT  0xffff0000 /* Number of Lines of Active Data in Field 2 */
+
+/* Bit masks for EPPIx_CLIP */
+
+#define                   LOW_ODD  0xff       /* Lower Limit for Odd Bytes (Chroma) */
+#define                  HIGH_ODD  0xff00     /* Upper Limit for Odd Bytes (Chroma) */
+#define                  LOW_EVEN  0xff0000   /* Lower Limit for Even Bytes (Luma) */
+#define                 HIGH_EVEN  0xff000000 /* Upper Limit for Even Bytes (Luma) */
+
+/* Bit masks for SPIx_BAUD */
+
+#define                  SPI_BAUD  0xffff     /* Baud Rate */
+
+/* Bit masks for SPIx_CTL */
+
+#define                       SPE  0x4000     /* SPI Enable */
+#define                       WOM  0x2000     /* Write Open Drain Master */
+#define                      MSTR  0x1000     /* Master Mode */
+#define                      CPOL  0x800      /* Clock Polarity */
+#define                      CPHA  0x400      /* Clock Phase */
+#define                      LSBF  0x200      /* LSB First */
+#define                      SIZE  0x100      /* Size of Words */
+#define                     EMISO  0x20       /* Enable MISO Output */
+#define                      PSSE  0x10       /* Slave-Select Enable */
+#define                        GM  0x8        /* Get More Data */
+#define                        SZ  0x4        /* Send Zero */
+#define                     TIMOD  0x3        /* Transfer Initiation Mode */
+
+/* Bit masks for SPIx_FLG */
+
+#define                      FLS1  0x2        /* Slave Select Enable 1 */
+#define                      FLS2  0x4        /* Slave Select Enable 2 */
+#define                      FLS3  0x8        /* Slave Select Enable 3 */
+#define                      FLG1  0x200      /* Slave Select Value 1 */
+#define                      FLG2  0x400      /* Slave Select Value 2 */
+#define                      FLG3  0x800      /* Slave Select Value 3 */
+
+/* Bit masks for SPIx_STAT */
+
+#define                     TXCOL  0x40       /* Transmit Collision Error */
+#define                       RXS  0x20       /* RDBR Data Buffer Status */
+#define                      RBSY  0x10       /* Receive Error */
+#define                       TXS  0x8        /* TDBR Data Buffer Status */
+#define                       TXE  0x4        /* Transmission Error */
+#define                      MODF  0x2        /* Mode Fault Error */
+#define                      SPIF  0x1        /* SPI Finished */
+
+/* Bit masks for SPIx_TDBR */
+
+#define                      TDBR  0xffff     /* Transmit Data Buffer */
+
+/* Bit masks for SPIx_RDBR */
+
+#define                      RDBR  0xffff     /* Receive Data Buffer */
+
+/* Bit masks for SPIx_SHADOW */
+
+#define                    SHADOW  0xffff     /* RDBR Shadow */
+
+/* ************************************************ */
+/* The TWI bit masks fields are from the ADSP-BF538 */
+/* and they have not been verified as the final     */
+/* ones for the Moab processors ... bz 1/19/2007    */
+/* ************************************************ */
+
+/* Bit masks for TWIx_CONTROL */
+
+#define                  PRESCALE  0x7f       /* Prescale Value */
+#define                   TWI_ENA  0x80       /* TWI Enable */
+#define                      SCCB  0x200      /* Serial Camera Control Bus */
+
+/* Bit maskes for TWIx_CLKDIV */
+
+#define                    CLKLOW  0xff       /* Clock Low */
+#define                     CLKHI  0xff00     /* Clock High */
+
+/* Bit maskes for TWIx_SLAVE_CTL */
+
+#define                       SEN  0x1        /* Slave Enable */
+#define                    STDVAL  0x4        /* Slave Transmit Data Valid */
+#define                       NAK  0x8        /* Not Acknowledge */
+#define                       GEN  0x10       /* General Call Enable */
+
+/* Bit maskes for TWIx_SLAVE_ADDR */
+
+#define                     SADDR  0x7f       /* Slave Mode Address */
+
+/* Bit maskes for TWIx_SLAVE_STAT */
+
+#define                      SDIR  0x1        /* Slave Transfer Direction */
+#define                     GCALL  0x2        /* General Call */
+
+/* Bit maskes for TWIx_MASTER_CTL */
+
+#define                       MEN  0x1        /* Master Mode Enable */
+#define                      MDIR  0x4        /* Master Transfer Direction */
+#define                      FAST  0x8        /* Fast Mode */
+#define                      STOP  0x10       /* Issue Stop Condition */
+#define                    RSTART  0x20       /* Repeat Start */
+#define                      DCNT  0x3fc0     /* Data Transfer Count */
+#define                    SDAOVR  0x4000     /* Serial Data Override */
+#define                    SCLOVR  0x8000     /* Serial Clock Override */
+
+/* Bit maskes for TWIx_MASTER_ADDR */
+
+#define                     MADDR  0x7f       /* Master Mode Address */
+
+/* Bit maskes for TWIx_MASTER_STAT */
+
+#define                     MPROG  0x1        /* Master Transfer in Progress */
+#define                   LOSTARB  0x2        /* Lost Arbitration */
+#define                      ANAK  0x4        /* Address Not Acknowledged */
+#define                      DNAK  0x8        /* Data Not Acknowledged */
+#define                  BUFRDERR  0x10       /* Buffer Read Error */
+#define                  BUFWRERR  0x20       /* Buffer Write Error */
+#define                    SDASEN  0x40       /* Serial Data Sense */
+#define                    SCLSEN  0x80       /* Serial Clock Sense */
+#define                   BUSBUSY  0x100      /* Bus Busy */
+
+/* Bit maskes for TWIx_FIFO_CTL */
+
+#define                  XMTFLUSH  0x1        /* Transmit Buffer Flush */
+#define                  RCVFLUSH  0x2        /* Receive Buffer Flush */
+#define                 XMTINTLEN  0x4        /* Transmit Buffer Interrupt Length */
+#define                 RCVINTLEN  0x8        /* Receive Buffer Interrupt Length */
+
+/* Bit maskes for TWIx_FIFO_STAT */
+
+#define                   XMTSTAT  0x3        /* Transmit FIFO Status */
+#define                   RCVSTAT  0xc        /* Receive FIFO Status */
+
+/* Bit maskes for TWIx_INT_MASK */
+
+#define                    SINITM  0x1        /* Slave Transfer Initiated Interrupt Mask */
+#define                    SCOMPM  0x2        /* Slave Transfer Complete Interrupt Mask */
+#define                     SERRM  0x4        /* Slave Transfer Error Interrupt Mask */
+#define                     SOVFM  0x8        /* Slave Overflow Interrupt Mask */
+#define                    MCOMPM  0x10       /* Master Transfer Complete Interrupt Mask */
+#define                     MERRM  0x20       /* Master Transfer Error Interrupt Mask */
+#define                  XMTSERVM  0x40       /* Transmit FIFO Service Interrupt Mask */
+#define                  RCVSERVM  0x80       /* Receive FIFO Service Interrupt Mask */
+
+/* Bit maskes for TWIx_INT_STAT */
+
+#define                     SINIT  0x1        /* Slave Transfer Initiated */
+#define                     SCOMP  0x2        /* Slave Transfer Complete */
+#define                      SERR  0x4        /* Slave Transfer Error */
+#define                      SOVF  0x8        /* Slave Overflow */
+#define                     MCOMP  0x10       /* Master Transfer Complete */
+#define                      MERR  0x20       /* Master Transfer Error */
+#define                   XMTSERV  0x40       /* Transmit FIFO Service */
+#define                   RCVSERV  0x80       /* Receive FIFO Service */
+
+/* Bit maskes for TWIx_XMT_DATA8 */
+
+#define                  XMTDATA8  0xff       /* Transmit FIFO 8-Bit Data */
+
+/* Bit maskes for TWIx_XMT_DATA16 */
+
+#define                 XMTDATA16  0xffff     /* Transmit FIFO 16-Bit Data */
+
+/* Bit maskes for TWIx_RCV_DATA8 */
+
+#define                  RCVDATA8  0xff       /* Receive FIFO 8-Bit Data */
+
+/* Bit maskes for TWIx_RCV_DATA16 */
+
+#define                 RCVDATA16  0xffff     /* Receive FIFO 16-Bit Data */
+
+/* Bit masks for SPORTx_TCR1 */
+
+#define                     TCKFE  0x4000     /* Clock Falling Edge Select */
+#define                     LATFS  0x2000     /* Late Transmit Frame Sync */
+#define                      LTFS  0x1000     /* Low Transmit Frame Sync Select */
+#define                     DITFS  0x800      /* Data-Independent Transmit Frame Sync Select */
+#define                      TFSR  0x400      /* Transmit Frame Sync Required Select */
+#define                      ITFS  0x200      /* Internal Transmit Frame Sync Select */
+#define                    TLSBIT  0x10       /* Transmit Bit Order */
+#define                    TDTYPE  0xc        /* Data Formatting Type Select */
+#define                     ITCLK  0x2        /* Internal Transmit Clock Select */
+#define                     TSPEN  0x1        /* Transmit Enable */
+
+/* Bit masks for SPORTx_TCR2 */
+
+#define                     TRFST  0x400      /* Left/Right Order */
+#define                     TSFSE  0x200      /* Transmit Stereo Frame Sync Enable */
+#define                      TXSE  0x100      /* TxSEC Enable */
+#define                    SLEN_T  0x1f       /* SPORT Word Length */
+
+/* Bit masks for SPORTx_RCR1 */
+
+#define                     RCKFE  0x4000     /* Clock Falling Edge Select */
+#define                     LARFS  0x2000     /* Late Receive Frame Sync */
+#define                      LRFS  0x1000     /* Low Receive Frame Sync Select */
+#define                      RFSR  0x400      /* Receive Frame Sync Required Select */
+#define                      IRFS  0x200      /* Internal Receive Frame Sync Select */
+#define                    RLSBIT  0x10       /* Receive Bit Order */
+#define                    RDTYPE  0xc        /* Data Formatting Type Select */
+#define                     IRCLK  0x2        /* Internal Receive Clock Select */
+#define                     RSPEN  0x1        /* Receive Enable */
+
+/* Bit masks for SPORTx_RCR2 */
+
+#define                     RRFST  0x400      /* Left/Right Order */
+#define                     RSFSE  0x200      /* Receive Stereo Frame Sync Enable */
+#define                      RXSE  0x100      /* RxSEC Enable */
+#define                    SLEN_R  0x1f       /* SPORT Word Length */
+
+/* Bit masks for SPORTx_STAT */
+
+#define                     TXHRE  0x40       /* Transmit Hold Register Empty */
+#define                      TOVF  0x20       /* Sticky Transmit Overflow Status */
+#define                      TUVF  0x10       /* Sticky Transmit Underflow Status */
+#define                       TXF  0x8        /* Transmit FIFO Full Status */
+#define                      ROVF  0x4        /* Sticky Receive Overflow Status */
+#define                      RUVF  0x2        /* Sticky Receive Underflow Status */
+#define                      RXNE  0x1        /* Receive FIFO Not Empty Status */
+
+/* Bit masks for SPORTx_MCMC1 */
+
+#define                  SP_WSIZE  0xf000     /* Window Size */
+#define                   SP_WOFF  0x3ff      /* Windows Offset */
+
+/* Bit masks for SPORTx_MCMC2 */
+
+#define                       MFD  0xf000     /* Multi channel Frame Delay */
+#define                      FSDR  0x80       /* Frame Sync to Data Relationship */
+#define                  MCMEN  0x10       /* Multi channel Frame Mode Enable */
+#define                   MCDRXPE  0x8        /* Multi channel DMA Receive Packing */
+#define                   MCDTXPE  0x4        /* Multi channel DMA Transmit Packing */
+#define                     MCCRM  0x3        /* 2X Clock Recovery Mode */
+
+/* Bit masks for SPORTx_CHNL */
+
+#define                  CUR_CHNL  0x3ff      /* Current Channel Indicator */
+
+/* Bit masks for UARTx_LCR */
+
+#if 0
+/* conflicts with legacy one in last section */
+#define                       WLS  0x3        /* Word Length Select */
+#endif
+#define                       STB  0x4        /* Stop Bits */
+#define                       PEN  0x8        /* Parity Enable */
+#define                       EPS  0x10       /* Even Parity Select */
+#define                       STP  0x20       /* Sticky Parity */
+#define                        SB  0x40       /* Set Break */
+
+/* Bit masks for UARTx_MCR */
+
+#define                      XOFF  0x1        /* Transmitter Off */
+#define                      MRTS  0x2        /* Manual Request To Send */
+#define                      RFIT  0x4        /* Receive FIFO IRQ Threshold */
+#define                      RFRT  0x8        /* Receive FIFO RTS Threshold */
+#define                  LOOP_ENA  0x10       /* Loopback Mode Enable */
+#define                     FCPOL  0x20       /* Flow Control Pin Polarity */
+#define                      ARTS  0x40       /* Automatic Request To Send */
+#define                      ACTS  0x80       /* Automatic Clear To Send */
+
+/* Bit masks for UARTx_LSR */
+
+#define                        DR  0x1        /* Data Ready */
+#define                        OE  0x2        /* Overrun Error */
+#define                        PE  0x4        /* Parity Error */
+#define                        FE  0x8        /* Framing Error */
+#define                        BI  0x10       /* Break Interrupt */
+#define                      THRE  0x20       /* THR Empty */
+#define                      TEMT  0x40       /* Transmitter Empty */
+#define                       TFI  0x80       /* Transmission Finished Indicator */
+
+/* Bit masks for UARTx_MSR */
+
+#define                      SCTS  0x1        /* Sticky CTS */
+#define                       CTS  0x10       /* Clear To Send */
+#define                      RFCS  0x20       /* Receive FIFO Count Status */
+
+/* Bit masks for UARTx_IER_SET & UARTx_IER_CLEAR */
+
+#define                   ERBFI  0x1        /* Enable Receive Buffer Full Interrupt */
+#define                   ETBEI  0x2        /* Enable Transmit Buffer Empty Interrupt */
+#define                    ELSI  0x4        /* Enable Receive Status Interrupt */
+#define                   EDSSI  0x8        /* Enable Modem Status Interrupt */
+#define                  EDTPTI  0x10       /* Enable DMA Transmit PIRQ Interrupt */
+#define                    ETFI  0x20       /* Enable Transmission Finished Interrupt */
+#define                   ERFCI  0x40       /* Enable Receive FIFO Count Interrupt */
+
+/* Bit masks for UARTx_GCTL */
+
+#define                      UCEN  0x1        /* UART Enable */
+#define                      IREN  0x2        /* IrDA Mode Enable */
+#define                     TPOLC  0x4        /* IrDA TX Polarity Change */
+#define                     RPOLC  0x8        /* IrDA RX Polarity Change */
+#define                       FPE  0x10       /* Force Parity Error */
+#define                       FFE  0x20       /* Force Framing Error */
+#define                      EDBO  0x40       /* Enable Divide-by-One */
+#define                     EGLSI  0x80       /* Enable Global LS Interrupt */
+
+
+/* ******************************************* */
+/*     MULTI BIT MACRO ENUMERATIONS            */
+/* ******************************************* */
+
+/* BCODE bit field options (SYSCFG register) */
+
+#define BCODE_WAKEUP    0x0000  /* boot according to wake-up condition */
+#define BCODE_FULLBOOT  0x0010  /* always perform full boot */
+#define BCODE_QUICKBOOT 0x0020  /* always perform quick boot */
+#define BCODE_NOBOOT    0x0030  /* always perform full boot */
+
+/* CNT_COMMAND bit field options */
+
+#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
+#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
+#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
+
+#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
+#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
+#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
+
+#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
+#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
+#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
+
+/* CNT_CONFIG bit field options */
+
+#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
+#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
+#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
+#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
+#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
+
+#define BNDMODE_COMP     0x0000  /* boundary compare mode */
+#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
+#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
+#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
+
+/* TMODE in TIMERx_CONFIG bit field options */
+
+#define PWM_OUT  0x0001
+#define WDTH_CAP 0x0002
+#define EXT_CLK  0x0003
+
+/* UARTx_LCR bit field options */
+
+#define WLS_5   0x0000    /* 5 data bits */
+#define WLS_6   0x0001    /* 6 data bits */
+#define WLS_7   0x0002    /* 7 data bits */
+#define WLS_8   0x0003    /* 8 data bits */
+
+/* PINTx Register Bit Definitions */
+
+#define PIQ0 0x00000001
+#define PIQ1 0x00000002
+#define PIQ2 0x00000004
+#define PIQ3 0x00000008
+
+#define PIQ4 0x00000010
+#define PIQ5 0x00000020
+#define PIQ6 0x00000040
+#define PIQ7 0x00000080
+
+#define PIQ8 0x00000100
+#define PIQ9 0x00000200
+#define PIQ10 0x00000400
+#define PIQ11 0x00000800
+
+#define PIQ12 0x00001000
+#define PIQ13 0x00002000
+#define PIQ14 0x00004000
+#define PIQ15 0x00008000
+
+#define PIQ16 0x00010000
+#define PIQ17 0x00020000
+#define PIQ18 0x00040000
+#define PIQ19 0x00080000
+
+#define PIQ20 0x00100000
+#define PIQ21 0x00200000
+#define PIQ22 0x00400000
+#define PIQ23 0x00800000
+
+#define PIQ24 0x01000000
+#define PIQ25 0x02000000
+#define PIQ26 0x04000000
+#define PIQ27 0x08000000
+
+#define PIQ28 0x10000000
+#define PIQ29 0x20000000
+#define PIQ30 0x40000000
+#define PIQ31 0x80000000
+
+/* PORT A Bit Definitions for the registers
+PORTA, PORTA_SET, PORTA_CLEAR,
+PORTA_DIR_SET, PORTA_DIR_CLEAR, PORTA_INEN,
+PORTA_FER registers
+*/
+
+#define PA0 0x0001
+#define PA1 0x0002
+#define PA2 0x0004
+#define PA3 0x0008
+#define PA4 0x0010
+#define PA5 0x0020
+#define PA6 0x0040
+#define PA7 0x0080
+#define PA8 0x0100
+#define PA9 0x0200
+#define PA10 0x0400
+#define PA11 0x0800
+#define PA12 0x1000
+#define PA13 0x2000
+#define PA14 0x4000
+#define PA15 0x8000
+
+/* PORT B Bit Definitions for the registers
+PORTB, PORTB_SET, PORTB_CLEAR,
+PORTB_DIR_SET, PORTB_DIR_CLEAR, PORTB_INEN,
+PORTB_FER registers
+*/
+
+#define PB0 0x0001
+#define PB1 0x0002
+#define PB2 0x0004
+#define PB3 0x0008
+#define PB4 0x0010
+#define PB5 0x0020
+#define PB6 0x0040
+#define PB7 0x0080
+#define PB8 0x0100
+#define PB9 0x0200
+#define PB10 0x0400
+#define PB11 0x0800
+#define PB12 0x1000
+#define PB13 0x2000
+#define PB14 0x4000
+
+
+/* PORT C Bit Definitions for the registers
+PORTC, PORTC_SET, PORTC_CLEAR,
+PORTC_DIR_SET, PORTC_DIR_CLEAR, PORTC_INEN,
+PORTC_FER registers
+*/
+
+
+#define PC0 0x0001
+#define PC1 0x0002
+#define PC2 0x0004
+#define PC3 0x0008
+#define PC4 0x0010
+#define PC5 0x0020
+#define PC6 0x0040
+#define PC7 0x0080
+#define PC8 0x0100
+#define PC9 0x0200
+#define PC10 0x0400
+#define PC11 0x0800
+#define PC12 0x1000
+#define PC13 0x2000
+
+
+/* PORT D Bit Definitions for the registers
+PORTD, PORTD_SET, PORTD_CLEAR,
+PORTD_DIR_SET, PORTD_DIR_CLEAR, PORTD_INEN,
+PORTD_FER registers
+*/
+
+#define PD0 0x0001
+#define PD1 0x0002
+#define PD2 0x0004
+#define PD3 0x0008
+#define PD4 0x0010
+#define PD5 0x0020
+#define PD6 0x0040
+#define PD7 0x0080
+#define PD8 0x0100
+#define PD9 0x0200
+#define PD10 0x0400
+#define PD11 0x0800
+#define PD12 0x1000
+#define PD13 0x2000
+#define PD14 0x4000
+#define PD15 0x8000
+
+/* PORT E Bit Definitions for the registers
+PORTE, PORTE_SET, PORTE_CLEAR,
+PORTE_DIR_SET, PORTE_DIR_CLEAR, PORTE_INEN,
+PORTE_FER registers
+*/
+
+
+#define PE0 0x0001
+#define PE1 0x0002
+#define PE2 0x0004
+#define PE3 0x0008
+#define PE4 0x0010
+#define PE5 0x0020
+#define PE6 0x0040
+#define PE7 0x0080
+#define PE8 0x0100
+#define PE9 0x0200
+#define PE10 0x0400
+#define PE11 0x0800
+#define PE12 0x1000
+#define PE13 0x2000
+#define PE14 0x4000
+#define PE15 0x8000
+
+/* PORT F Bit Definitions for the registers
+PORTF, PORTF_SET, PORTF_CLEAR,
+PORTF_DIR_SET, PORTF_DIR_CLEAR, PORTF_INEN,
+PORTF_FER registers
+*/
+
+
+#define PF0 0x0001
+#define PF1 0x0002
+#define PF2 0x0004
+#define PF3 0x0008
+#define PF4 0x0010
+#define PF5 0x0020
+#define PF6 0x0040
+#define PF7 0x0080
+#define PF8 0x0100
+#define PF9 0x0200
+#define PF10 0x0400
+#define PF11 0x0800
+#define PF12 0x1000
+#define PF13 0x2000
+#define PF14 0x4000
+#define PF15 0x8000
+
+/* PORT G Bit Definitions for the registers
+PORTG, PORTG_SET, PORTG_CLEAR,
+PORTG_DIR_SET, PORTG_DIR_CLEAR, PORTG_INEN,
+PORTG_FER registers
+*/
+
+
+#define PG0 0x0001
+#define PG1 0x0002
+#define PG2 0x0004
+#define PG3 0x0008
+#define PG4 0x0010
+#define PG5 0x0020
+#define PG6 0x0040
+#define PG7 0x0080
+#define PG8 0x0100
+#define PG9 0x0200
+#define PG10 0x0400
+#define PG11 0x0800
+#define PG12 0x1000
+#define PG13 0x2000
+#define PG14 0x4000
+#define PG15 0x8000
+
+/* PORT H Bit Definitions for the registers
+PORTH, PORTH_SET, PORTH_CLEAR,
+PORTH_DIR_SET, PORTH_DIR_CLEAR, PORTH_INEN,
+PORTH_FER registers
+*/
+
+
+#define PH0 0x0001
+#define PH1 0x0002
+#define PH2 0x0004
+#define PH3 0x0008
+#define PH4 0x0010
+#define PH5 0x0020
+#define PH6 0x0040
+#define PH7 0x0080
+#define PH8 0x0100
+#define PH9 0x0200
+#define PH10 0x0400
+#define PH11 0x0800
+#define PH12 0x1000
+#define PH13 0x2000
+
+
+/* PORT I Bit Definitions for the registers
+PORTI, PORTI_SET, PORTI_CLEAR,
+PORTI_DIR_SET, PORTI_DIR_CLEAR, PORTI_INEN,
+PORTI_FER registers
+*/
+
+
+#define PI0 0x0001
+#define PI1 0x0002
+#define PI2 0x0004
+#define PI3 0x0008
+#define PI4 0x0010
+#define PI5 0x0020
+#define PI6 0x0040
+#define PI7 0x0080
+#define PI8 0x0100
+#define PI9 0x0200
+#define PI10 0x0400
+#define PI11 0x0800
+#define PI12 0x1000
+#define PI13 0x2000
+#define PI14 0x4000
+#define PI15 0x8000
+
+/* PORT J Bit Definitions for the registers
+PORTJ, PORTJ_SET, PORTJ_CLEAR,
+PORTJ_DIR_SET, PORTJ_DIR_CLEAR, PORTJ_INEN,
+PORTJ_FER registers
+*/
+
+
+#define PJ0 0x0001
+#define PJ1 0x0002
+#define PJ2 0x0004
+#define PJ3 0x0008
+#define PJ4 0x0010
+#define PJ5 0x0020
+#define PJ6 0x0040
+#define PJ7 0x0080
+#define PJ8 0x0100
+#define PJ9 0x0200
+#define PJ10 0x0400
+#define PJ11 0x0800
+#define PJ12 0x1000
+#define PJ13 0x2000
+
+
+/* Port Muxing Bit Fields for PORTx_MUX Registers */
+
+#define MUX0 0x00000003
+#define MUX0_0 0x00000000
+#define MUX0_1 0x00000001
+#define MUX0_2 0x00000002
+#define MUX0_3 0x00000003
+
+#define MUX1 0x0000000C
+#define MUX1_0 0x00000000
+#define MUX1_1 0x00000004
+#define MUX1_2 0x00000008
+#define MUX1_3 0x0000000C
+
+#define MUX2 0x00000030
+#define MUX2_0 0x00000000
+#define MUX2_1 0x00000010
+#define MUX2_2 0x00000020
+#define MUX2_3 0x00000030
+
+#define MUX3 0x000000C0
+#define MUX3_0 0x00000000
+#define MUX3_1 0x00000040
+#define MUX3_2 0x00000080
+#define MUX3_3 0x000000C0
+
+#define MUX4 0x00000300
+#define MUX4_0 0x00000000
+#define MUX4_1 0x00000100
+#define MUX4_2 0x00000200
+#define MUX4_3 0x00000300
+
+#define MUX5 0x00000C00
+#define MUX5_0 0x00000000
+#define MUX5_1 0x00000400
+#define MUX5_2 0x00000800
+#define MUX5_3 0x00000C00
+
+#define MUX6 0x00003000
+#define MUX6_0 0x00000000
+#define MUX6_1 0x00001000
+#define MUX6_2 0x00002000
+#define MUX6_3 0x00003000
+
+#define MUX7 0x0000C000
+#define MUX7_0 0x00000000
+#define MUX7_1 0x00004000
+#define MUX7_2 0x00008000
+#define MUX7_3 0x0000C000
+
+#define MUX8 0x00030000
+#define MUX8_0 0x00000000
+#define MUX8_1 0x00010000
+#define MUX8_2 0x00020000
+#define MUX8_3 0x00030000
+
+#define MUX9 0x000C0000
+#define MUX9_0 0x00000000
+#define MUX9_1 0x00040000
+#define MUX9_2 0x00080000
+#define MUX9_3 0x000C0000
+
+#define MUX10 0x00300000
+#define MUX10_0 0x00000000
+#define MUX10_1 0x00100000
+#define MUX10_2 0x00200000
+#define MUX10_3 0x00300000
+
+#define MUX11 0x00C00000
+#define MUX11_0 0x00000000
+#define MUX11_1 0x00400000
+#define MUX11_2 0x00800000
+#define MUX11_3 0x00C00000
+
+#define MUX12 0x03000000
+#define MUX12_0 0x00000000
+#define MUX12_1 0x01000000
+#define MUX12_2 0x02000000
+#define MUX12_3 0x03000000
+
+#define MUX13 0x0C000000
+#define MUX13_0 0x00000000
+#define MUX13_1 0x04000000
+#define MUX13_2 0x08000000
+#define MUX13_3 0x0C000000
+
+#define MUX14 0x30000000
+#define MUX14_0 0x00000000
+#define MUX14_1 0x10000000
+#define MUX14_2 0x20000000
+#define MUX14_3 0x30000000
+
+#define MUX15 0xC0000000
+#define MUX15_0 0x00000000
+#define MUX15_1 0x40000000
+#define MUX15_2 0x80000000
+#define MUX15_3 0xC0000000
+
+#define MUX(b15,b14,b13,b12,b11,b10,b9,b8,b7,b6,b5,b4,b3,b2,b1,b0) \
+    ((((b15)&3) << 30) | \
+     (((b14)&3) << 28) | \
+     (((b13)&3) << 26) | \
+     (((b12)&3) << 24) | \
+     (((b11)&3) << 22) | \
+     (((b10)&3) << 20) | \
+     (((b9) &3) << 18) | \
+     (((b8) &3) << 16) | \
+     (((b7) &3) << 14) | \
+     (((b6) &3) << 12) | \
+     (((b5) &3) << 10) | \
+     (((b4) &3) << 8)  | \
+     (((b3) &3) << 6)  | \
+     (((b2) &3) << 4)  | \
+     (((b1) &3) << 2)  | \
+     (((b0) &3)))
+
+/* Bit fields for PINT0_ASSIGN and PINT1_ASSIGN registers */
+
+#define B0MAP 0x000000FF     /* Byte 0 Lower Half Port Mapping */
+#define B0MAP_PAL 0x00000000 /* Map Port A Low to Byte 0 */
+#define B0MAP_PBL 0x00000001 /* Map Port B Low to Byte 0 */
+#define B1MAP 0x0000FF00     /* Byte 1 Upper Half Port Mapping */
+#define B1MAP_PAH 0x00000000 /* Map Port A High to Byte 1 */
+#define B1MAP_PBH 0x00000100 /* Map Port B High to Byte 1 */
+#define B2MAP 0x00FF0000     /* Byte 2 Lower Half Port Mapping */
+#define B2MAP_PAL 0x00000000 /* Map Port A Low to Byte 2 */
+#define B2MAP_PBL 0x00010000 /* Map Port B Low to Byte 2 */
+#define B3MAP 0xFF000000     /* Byte 3 Upper Half Port Mapping */
+#define B3MAP_PAH 0x00000000 /* Map Port A High to Byte 3 */
+#define B3MAP_PBH 0x01000000 /* Map Port B High to Byte 3 */
+
+/* Bit fields for PINT2_ASSIGN and PINT3_ASSIGN registers */
+
+#define B0MAP_PCL 0x00000000 /* Map Port C Low to Byte 0 */
+#define B0MAP_PDL 0x00000001 /* Map Port D Low to Byte 0 */
+#define B0MAP_PEL 0x00000002 /* Map Port E Low to Byte 0 */
+#define B0MAP_PFL 0x00000003 /* Map Port F Low to Byte 0 */
+#define B0MAP_PGL 0x00000004 /* Map Port G Low to Byte 0 */
+#define B0MAP_PHL 0x00000005 /* Map Port H Low to Byte 0 */
+#define B0MAP_PIL 0x00000006 /* Map Port I Low to Byte 0 */
+#define B0MAP_PJL 0x00000007 /* Map Port J Low to Byte 0 */
+
+#define B1MAP_PCH 0x00000000 /* Map Port C High to Byte 1 */
+#define B1MAP_PDH 0x00000100 /* Map Port D High to Byte 1 */
+#define B1MAP_PEH 0x00000200 /* Map Port E High to Byte 1 */
+#define B1MAP_PFH 0x00000300 /* Map Port F High to Byte 1 */
+#define B1MAP_PGH 0x00000400 /* Map Port G High to Byte 1 */
+#define B1MAP_PHH 0x00000500 /* Map Port H High to Byte 1 */
+#define B1MAP_PIH 0x00000600 /* Map Port I High to Byte 1 */
+#define B1MAP_PJH 0x00000700 /* Map Port J High to Byte 1 */
+
+#define B2MAP_PCL 0x00000000 /* Map Port C Low to Byte 2 */
+#define B2MAP_PDL 0x00010000 /* Map Port D Low to Byte 2 */
+#define B2MAP_PEL 0x00020000 /* Map Port E Low to Byte 2 */
+#define B2MAP_PFL 0x00030000 /* Map Port F Low to Byte 2 */
+#define B2MAP_PGL 0x00040000 /* Map Port G Low to Byte 2 */
+#define B2MAP_PHL 0x00050000 /* Map Port H Low to Byte 2 */
+#define B2MAP_PIL 0x00060000 /* Map Port I Low to Byte 2 */
+#define B2MAP_PJL 0x00070000 /* Map Port J Low to Byte 2 */
+
+#define B3MAP_PCH 0x00000000 /* Map Port C High to Byte 3 */
+#define B3MAP_PDH 0x01000000 /* Map Port D High to Byte 3 */
+#define B3MAP_PEH 0x02000000 /* Map Port E High to Byte 3 */
+#define B3MAP_PFH 0x03000000 /* Map Port F High to Byte 3 */
+#define B3MAP_PGH 0x04000000 /* Map Port G High to Byte 3 */
+#define B3MAP_PHH 0x05000000 /* Map Port H High to Byte 3 */
+#define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */
+#define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */
+
+
+/* for legacy compatibility */
+
+#define WLS(x)  (((x)-5) & 0x03) /* Word Length Select */
+#define W1LMAX_MAX W1LMAX_MIN
+#define EBIU_AMCBCTL0 EBIU_AMBCTL0
+#define EBIU_AMCBCTL1 EBIU_AMBCTL1
+#define PINT0_IRQ PINT0_REQUEST
+#define PINT1_IRQ PINT1_REQUEST
+#define PINT2_IRQ PINT2_REQUEST
+#define PINT3_IRQ PINT3_REQUEST
+
+#endif /* _DEF_BF54X_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h
new file mode 100644
index 00000000000..36a2ef7e784
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/dma.h
@@ -0,0 +1,76 @@
+/*
+ * file:         include/asm-blackfin/mach-bf548/dma.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define CH_SPORT0_RX		0
+#define CH_SPORT0_TX		1
+#define CH_SPORT1_RX		2
+#define CH_SPORT1_TX		3
+#define CH_SPI0			4
+#define CH_SPI1			5
+#define CH_UART0_RX 		6
+#define CH_UART0_TX 		7
+#define CH_UART1_RX 		8
+#define CH_UART1_TX 		9
+#define CH_ATAPI_RX		10
+#define CH_ATAPI_TX		11
+#define CH_EPPI0		12
+#define CH_EPPI1		13
+#define CH_EPPI2		14
+#define CH_PIXC_IMAGE		15
+#define CH_PIXC_OVERLAY		16
+#define CH_PIXC_OUTPUT		17
+#define CH_SPORT2_RX		18
+#define CH_UART2_RX		18
+#define CH_SPORT2_TX		19
+#define CH_UART2_TX		19
+#define CH_SPORT3_RX		20
+#define CH_UART3_RX		20
+#define CH_SPORT3_TX		21
+#define CH_UART3_TX		21
+#define CH_SDH			22
+#define CH_NFC			22
+#define CH_SPI2			23
+
+#define CH_MEM_STREAM0_DEST	24
+#define CH_MEM_STREAM0_SRC	25
+#define CH_MEM_STREAM1_DEST	26
+#define CH_MEM_STREAM1_SRC	27
+#define CH_MEM_STREAM2_DEST	28
+#define CH_MEM_STREAM2_SRC	29
+#define CH_MEM_STREAM3_DEST	30
+#define CH_MEM_STREAM3_SRC	31
+
+#define MAX_BLACKFIN_DMA_CHANNEL 32
+
+#endif
diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
new file mode 100644
index 00000000000..bba82dc75f1
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -0,0 +1,219 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/gpio.h
+ * Based on:
+ * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+
+
+#define GPIO_PA0	0
+#define GPIO_PA1	1
+#define GPIO_PA2	2
+#define GPIO_PA3	3
+#define GPIO_PA4	4
+#define GPIO_PA5	5
+#define GPIO_PA6	6
+#define GPIO_PA7	7
+#define GPIO_PA8	8
+#define GPIO_PA9	9
+#define GPIO_PA10	10
+#define GPIO_PA11	11
+#define GPIO_PA12	12
+#define GPIO_PA13	13
+#define GPIO_PA14	14
+#define GPIO_PA15	15
+#define GPIO_PB0	16
+#define GPIO_PB1	17
+#define GPIO_PB2	18
+#define GPIO_PB3	19
+#define GPIO_PB4	20
+#define GPIO_PB5	21
+#define GPIO_PB6	22
+#define GPIO_PB7	23
+#define GPIO_PB8	24
+#define GPIO_PB9	25
+#define GPIO_PB10	26
+#define GPIO_PB11	27
+#define GPIO_PB12	28
+#define GPIO_PB13	29
+#define GPIO_PB14	30
+#define GPIO_PB15	31	/* N/A */
+#define GPIO_PC0	32
+#define GPIO_PC1	33
+#define GPIO_PC2	34
+#define GPIO_PC3	35
+#define GPIO_PC4	36
+#define GPIO_PC5	37
+#define GPIO_PC6	38
+#define GPIO_PC7	39
+#define GPIO_PC8	40
+#define GPIO_PC9	41
+#define GPIO_PC10	42
+#define GPIO_PC11	43
+#define GPIO_PC12	44
+#define GPIO_PC13	45
+#define GPIO_PC14	46	/* N/A */
+#define GPIO_PC15	47	/* N/A */
+#define GPIO_PD0	48
+#define GPIO_PD1	49
+#define GPIO_PD2	50
+#define GPIO_PD3	51
+#define GPIO_PD4	52
+#define GPIO_PD5	53
+#define GPIO_PD6	54
+#define GPIO_PD7	55
+#define GPIO_PD8	56
+#define GPIO_PD9	57
+#define GPIO_PD10	58
+#define GPIO_PD11	59
+#define GPIO_PD12	60
+#define GPIO_PD13	61
+#define GPIO_PD14	62
+#define GPIO_PD15	63
+#define GPIO_PE0	64
+#define GPIO_PE1	65
+#define GPIO_PE2	66
+#define GPIO_PE3	67
+#define GPIO_PE4	68
+#define GPIO_PE5	69
+#define GPIO_PE6	70
+#define GPIO_PE7	71
+#define GPIO_PE8	72
+#define GPIO_PE9	73
+#define GPIO_PE10	74
+#define GPIO_PE11	75
+#define GPIO_PE12	76
+#define GPIO_PE13	77
+#define GPIO_PE14	78
+#define GPIO_PE15	79
+#define GPIO_PF0	80
+#define GPIO_PF1	81
+#define GPIO_PF2	82
+#define GPIO_PF3	83
+#define GPIO_PF4	84
+#define GPIO_PF5	85
+#define GPIO_PF6	86
+#define GPIO_PF7	87
+#define GPIO_PF8	88
+#define GPIO_PF9	89
+#define GPIO_PF10	90
+#define GPIO_PF11	91
+#define GPIO_PF12	92
+#define GPIO_PF13	93
+#define GPIO_PF14	94
+#define GPIO_PF15	95
+#define GPIO_PG0	96
+#define GPIO_PG1	97
+#define GPIO_PG2	98
+#define GPIO_PG3	99
+#define GPIO_PG4	100
+#define GPIO_PG5	101
+#define GPIO_PG6	102
+#define GPIO_PG7	103
+#define GPIO_PG8	104
+#define GPIO_PG9	105
+#define GPIO_PG10	106
+#define GPIO_PG11	107
+#define GPIO_PG12	108
+#define GPIO_PG13	109
+#define GPIO_PG14	110
+#define GPIO_PG15	111
+#define GPIO_PH0	112
+#define GPIO_PH1	113
+#define GPIO_PH2	114
+#define GPIO_PH3	115
+#define GPIO_PH4	116
+#define GPIO_PH5	117
+#define GPIO_PH6	118
+#define GPIO_PH7	119
+#define GPIO_PH8	120
+#define GPIO_PH9	121
+#define GPIO_PH10	122
+#define GPIO_PH11	123
+#define GPIO_PH12	124
+#define GPIO_PH13	125
+#define GPIO_PH14	126	/* N/A */
+#define GPIO_PH15	127	/* N/A */
+#define GPIO_PI0	128
+#define GPIO_PI1	129
+#define GPIO_PI2	130
+#define GPIO_PI3	131
+#define GPIO_PI4	132
+#define GPIO_PI5	133
+#define GPIO_PI6	134
+#define GPIO_PI7	135
+#define GPIO_PI8	136
+#define GPIO_PI9	137
+#define GPIO_PI10	138
+#define GPIO_PI11	139
+#define GPIO_PI12	140
+#define GPIO_PI13	141
+#define GPIO_PI14	142
+#define GPIO_PI15	143
+#define GPIO_PJ0	144
+#define GPIO_PJ1	145
+#define GPIO_PJ2	146
+#define GPIO_PJ3	147
+#define GPIO_PJ4	148
+#define GPIO_PJ5	149
+#define GPIO_PJ6	150
+#define GPIO_PJ7	151
+#define GPIO_PJ8	152
+#define GPIO_PJ9	153
+#define GPIO_PJ10	154
+#define GPIO_PJ11	155
+#define GPIO_PJ12	156
+#define GPIO_PJ13	157
+#define GPIO_PJ14	158	/* N/A */
+#define GPIO_PJ15	159	/* N/A */
+
+#define MAX_BLACKFIN_GPIOS 160
+
+struct gpio_port_t {
+	unsigned short port_fer;
+	unsigned short dummy1;
+	unsigned short port_data;
+	unsigned short dummy2;
+	unsigned short port_set;
+	unsigned short dummy3;
+	unsigned short port_clear;
+	unsigned short dummy4;
+	unsigned short port_dir_set;
+	unsigned short dummy5;
+	unsigned short port_dir_clear;
+	unsigned short dummy6;
+	unsigned short port_inen;
+	unsigned short dummy7;
+	unsigned int port_mux;
+};
+
+struct gpio_port_s {
+	unsigned short fer;
+	unsigned short data;
+	unsigned short dir;
+	unsigned short inen;
+	unsigned int mux;
+};
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
new file mode 100644
index 00000000000..ad380d1f587
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -0,0 +1,501 @@
+/*
+ * file:	include/asm-blackfin/mach-bf548/irq.h
+ * based on:	include/asm-blackfin/mach-bf537/irq.h
+ * author:	Roy Huang (roy.huang@analog.com)
+ *
+ * created:
+ * description:
+ *	system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _BF548_IRQ_H_
+#define _BF548_IRQ_H_
+
+/*
+ * Interrupt source definitions
+            Event Source    Core Event Name
+Core        Emulation               **
+Events         (highest priority)  EMU         0
+            Reset                   RST         1
+            NMI                     NMI         2
+            Exception               EVX         3
+            Reserved                --          4
+            Hardware Error          IVHW        5
+            Core Timer              IVTMR       6 *
+
+.....
+
+            Software Interrupt 1    IVG14       31
+            Software Interrupt 2    --
+                 (lowest priority)  IVG15       32 *
+ */
+
+#define NR_PERI_INTS    (32 * 3)
+
+/* The ABSTRACT IRQ definitions */
+/** the first seven of the following are fixed, the rest you change if you need to **/
+#define IRQ_EMU			0	/* Emulation */
+#define IRQ_RST			1	/* reset */
+#define IRQ_NMI			2	/* Non Maskable */
+#define IRQ_EVX			3	/* Exception */
+#define IRQ_UNUSED		4	/* - unused interrupt*/
+#define IRQ_HWERR		5	/* Hardware Error */
+#define IRQ_CORETMR		6	/* Core timer */
+
+#define BFIN_IRQ(x)		((x) + 7)
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMAC0_ERROR		BFIN_IRQ(1)	/* DMAC0 Status Interrupt */
+#define IRQ_EPPI0_ERROR		BFIN_IRQ(2)	/* EPPI0 Error Interrupt */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(3)	/* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(4)	/* SPORT1 Error Interrupt */
+#define IRQ_SPI0_ERROR		BFIN_IRQ(5)	/* SPI0 Status(Error) Interrupt */
+#define IRQ_UART0_ERROR		BFIN_IRQ(6)	/* UART0 Status(Error) Interrupt */
+#define IRQ_RTC			BFIN_IRQ(7)	/* RTC Interrupt */
+#define IRQ_EPPI0		BFIN_IRQ(8)	/* EPPI0 Interrupt (DMA12) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(9)	/* SPORT0 RX Interrupt (DMA0) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(10)	/* SPORT0 TX Interrupt (DMA1) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(11)	/* SPORT1 RX Interrupt (DMA2) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(12)	/* SPORT1 TX Interrupt (DMA3) */
+#define IRQ_SPI0		BFIN_IRQ(13)	/* SPI0 Interrupt (DMA4) */
+#define IRQ_UART0_RX		BFIN_IRQ(14)	/* UART0 RX Interrupt (DMA6) */
+#define IRQ_UART0_TX		BFIN_IRQ(15)	/* UART0 TX Interrupt (DMA7) */
+#define IRQ_TIMER8		BFIN_IRQ(16)	/* TIMER 8 Interrupt */
+#define IRQ_TIMER9		BFIN_IRQ(17)	/* TIMER 9 Interrupt */
+#define IRQ_TIMER10		BFIN_IRQ(18)	/* TIMER 10 Interrupt */
+#define IRQ_PINT0		BFIN_IRQ(19)	/* PINT0 Interrupt */
+#define IRQ_PINT1		BFIN_IRQ(20)	/* PINT1 Interrupt */
+#define IRQ_MDMAS0		BFIN_IRQ(21)	/* MDMA Stream 0 Interrupt */
+#define IRQ_MDMAS1		BFIN_IRQ(22)	/* MDMA Stream 1 Interrupt */
+#define IRQ_WATCH		BFIN_IRQ(23)	/* Watchdog Interrupt */
+#define IRQ_DMAC1_ERROR		BFIN_IRQ(24)	/* DMAC1 Status (Error) Interrupt */
+#define IRQ_SPORT2_ERROR	BFIN_IRQ(25)	/* SPORT2 Error Interrupt */
+#define IRQ_SPORT3_ERROR	BFIN_IRQ(26)	/* SPORT3 Error Interrupt */
+#define IRQ_MXVR_DATA		BFIN_IRQ(27)	/* MXVR Data Interrupt */
+#define IRQ_SPI1_ERROR		BFIN_IRQ(28)	/* SPI1 Status (Error) Interrupt */
+#define IRQ_SPI2_ERROR		BFIN_IRQ(29)	/* SPI2 Status (Error) Interrupt */
+#define IRQ_UART1_ERROR		BFIN_IRQ(30)	/* UART1 Status (Error) Interrupt */
+#define IRQ_UART2_ERROR		BFIN_IRQ(31)	/* UART2 Status (Error) Interrupt */
+#define IRQ_CAN0_ERROR		BFIN_IRQ(32)	/* CAN0 Status (Error) Interrupt */
+#define IRQ_SPORT2_RX		BFIN_IRQ(33)	/* SPORT2 RX (DMA18) Interrupt */
+#define IRQ_UART2_RX		BFIN_IRQ(33)	/* UART2 RX (DMA18) Interrupt */
+#define IRQ_SPORT2_TX		BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
+#define IRQ_UART2_TX		BFIN_IRQ(34)	/* UART2 TX (DMA19) Interrupt */
+#define IRQ_SPORT3_RX		BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
+#define IRQ_UART3_RX		BFIN_IRQ(35)	/* UART3 RX (DMA20) Interrupt */
+#define IRQ_SPORT3_TX		BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
+#define IRQ_UART3_TX		BFIN_IRQ(36)	/* UART3 TX (DMA21) Interrupt */
+#define IRQ_EPPI1		BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
+#define IRQ_EPPI2		BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
+#define IRQ_SPI1		BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */
+#define IRQ_SPI2		BFIN_IRQ(40)	/* SPI2 (DMA23) Interrupt */
+#define IRQ_UART1_RX		BFIN_IRQ(41)	/* UART1 RX (DMA8) Interrupt */
+#define IRQ_UART1_TX		BFIN_IRQ(42)	/* UART1 TX (DMA9) Interrupt */
+#define IRQ_ATAPI_RX		BFIN_IRQ(43)	/* ATAPI RX (DMA10) Interrupt */
+#define IRQ_ATAPI_TX		BFIN_IRQ(44)	/* ATAPI TX (DMA11) Interrupt */
+#define IRQ_TWI0		BFIN_IRQ(45)	/* TWI0 Interrupt */
+#define IRQ_TWI1		BFIN_IRQ(46)	/* TWI1 Interrupt */
+#define IRQ_CAN0_RX		BFIN_IRQ(47)	/* CAN0 Receive Interrupt */
+#define IRQ_CAN0_TX		BFIN_IRQ(48)	/* CAN0 Transmit Interrupt */
+#define IRQ_MDMAS2		BFIN_IRQ(49)	/* MDMA Stream 2 Interrupt */
+#define IRQ_MDMAS3		BFIN_IRQ(50)	/* MDMA Stream 3 Interrupt */
+#define IRQ_MXVR_ERROR		BFIN_IRQ(51)	/* MXVR Status (Error) Interrupt */
+#define IRQ_MXVR_MSG		BFIN_IRQ(52)	/* MXVR Message Interrupt */
+#define IRQ_MXVR_PKT		BFIN_IRQ(53)	/* MXVR Packet Interrupt */
+#define IRQ_EPP1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
+#define IRQ_EPP2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
+#define IRQ_UART3_ERROR		BFIN_IRQ(56)	/* UART3 Status (Error) Interrupt */
+#define IRQ_HOST_ERROR		BFIN_IRQ(57)	/* HOST Status (Error) Interrupt */
+#define IRQ_PIXC_ERROR		BFIN_IRQ(59)	/* PIXC Status (Error) Interrupt */
+#define IRQ_NFC_ERROR		BFIN_IRQ(60)	/* NFC Error Interrupt */
+#define IRQ_ATAPI_ERROR		BFIN_IRQ(61)	/* ATAPI Error Interrupt */
+#define IRQ_CAN1_ERROR		BFIN_IRQ(62)	/* CAN1 Status (Error) Interrupt */
+#define IRQ_HS_DMA_ERROR	BFIN_IRQ(63)	/* Handshake DMA Status Interrupt */
+#define IRQ_PIXC_IN0		BFIN_IRQ(64)	/* PIXC IN0 (DMA15) Interrupt */
+#define IRQ_PIXC_IN1		BFIN_IRQ(65)	/* PIXC IN1 (DMA16) Interrupt */
+#define IRQ_PIXC_OUT		BFIN_IRQ(66)	/* PIXC OUT (DMA17) Interrupt */
+#define IRQ_SDH			BFIN_IRQ(67)	/* SDH/NFC (DMA22) Interrupt */
+#define IRQ_CNT			BFIN_IRQ(68)	/* CNT Interrupt */
+#define IRQ_KEY			BFIN_IRQ(69)	/* KEY Interrupt */
+#define IRQ_CAN1_RX		BFIN_IRQ(70)	/* CAN1 RX Interrupt */
+#define IRQ_CAN1_TX		BFIN_IRQ(71)	/* CAN1 TX Interrupt */
+#define IRQ_SDH_MASK0		BFIN_IRQ(72)	/* SDH Mask 0 Interrupt */
+#define IRQ_SDH_MASK1		BFIN_IRQ(73)	/* SDH Mask 1 Interrupt */
+#define IRQ_USB_INT0		BFIN_IRQ(75)	/* USB INT0 Interrupt */
+#define IRQ_USB_INT1		BFIN_IRQ(76)	/* USB INT1 Interrupt */
+#define IRQ_USB_INT2		BFIN_IRQ(77)	/* USB INT2 Interrupt */
+#define IRQ_USB_DMA		BFIN_IRQ(78)	/* USB DMA Interrupt */
+#define IRQ_OPTSEC		BFIN_IRQ(79)	/* OTPSEC Interrupt */
+#define IRQ_TIMER0		BFIN_IRQ(86)	/* Timer 0 Interrupt */
+#define IRQ_TIMER1		BFIN_IRQ(87)	/* Timer 1 Interrupt */
+#define IRQ_TIMER2		BFIN_IRQ(88)	/* Timer 2 Interrupt */
+#define IRQ_TIMER3		BFIN_IRQ(89)	/* Timer 3 Interrupt */
+#define IRQ_TIMER4		BFIN_IRQ(90)	/* Timer 4 Interrupt */
+#define IRQ_TIMER5		BFIN_IRQ(91)	/* Timer 5 Interrupt */
+#define IRQ_TIMER6		BFIN_IRQ(92)	/* Timer 6 Interrupt */
+#define IRQ_TIMER7		BFIN_IRQ(93)	/* Timer 7 Interrupt */
+#define IRQ_PINT2		BFIN_IRQ(94)	/* PINT2 Interrupt */
+#define IRQ_PINT3		BFIN_IRQ(95)	/* PINT3 Interrupt */
+
+#define SYS_IRQS        	IRQ_PINT3
+
+#define BFIN_PA_IRQ(x)		((x) + SYS_IRQS + 1)
+#define IRQ_PA0			BFIN_PA_IRQ(0)
+#define IRQ_PA1			BFIN_PA_IRQ(1)
+#define IRQ_PA2			BFIN_PA_IRQ(2)
+#define IRQ_PA3			BFIN_PA_IRQ(3)
+#define IRQ_PA4			BFIN_PA_IRQ(4)
+#define IRQ_PA5			BFIN_PA_IRQ(5)
+#define IRQ_PA6			BFIN_PA_IRQ(6)
+#define IRQ_PA7			BFIN_PA_IRQ(7)
+#define IRQ_PA8			BFIN_PA_IRQ(8)
+#define IRQ_PA9			BFIN_PA_IRQ(9)
+#define IRQ_PA10		BFIN_PA_IRQ(10)
+#define IRQ_PA11		BFIN_PA_IRQ(11)
+#define IRQ_PA12		BFIN_PA_IRQ(12)
+#define IRQ_PA13		BFIN_PA_IRQ(13)
+#define IRQ_PA14		BFIN_PA_IRQ(14)
+#define IRQ_PA15		BFIN_PA_IRQ(15)
+
+#define BFIN_PB_IRQ(x)		((x) + IRQ_PA15 + 1)
+#define IRQ_PB0			BFIN_PB_IRQ(0)
+#define IRQ_PB1			BFIN_PB_IRQ(1)
+#define IRQ_PB2			BFIN_PB_IRQ(2)
+#define IRQ_PB3			BFIN_PB_IRQ(3)
+#define IRQ_PB4			BFIN_PB_IRQ(4)
+#define IRQ_PB5			BFIN_PB_IRQ(5)
+#define IRQ_PB6			BFIN_PB_IRQ(6)
+#define IRQ_PB7			BFIN_PB_IRQ(7)
+#define IRQ_PB8			BFIN_PB_IRQ(8)
+#define IRQ_PB9			BFIN_PB_IRQ(9)
+#define IRQ_PB10		BFIN_PB_IRQ(10)
+#define IRQ_PB11		BFIN_PB_IRQ(11)
+#define IRQ_PB12		BFIN_PB_IRQ(12)
+#define IRQ_PB13		BFIN_PB_IRQ(13)
+#define IRQ_PB14		BFIN_PB_IRQ(14)
+#define IRQ_PB15		BFIN_PB_IRQ(15)		/* N/A */
+
+#define BFIN_PC_IRQ(x)		((x) + IRQ_PB15 + 1)
+#define IRQ_PC0			BFIN_PC_IRQ(0)
+#define IRQ_PC1			BFIN_PC_IRQ(1)
+#define IRQ_PC2			BFIN_PC_IRQ(2)
+#define IRQ_PC3			BFIN_PC_IRQ(3)
+#define IRQ_PC4			BFIN_PC_IRQ(4)
+#define IRQ_PC5			BFIN_PC_IRQ(5)
+#define IRQ_PC6			BFIN_PC_IRQ(6)
+#define IRQ_PC7			BFIN_PC_IRQ(7)
+#define IRQ_PC8			BFIN_PC_IRQ(8)
+#define IRQ_PC9			BFIN_PC_IRQ(9)
+#define IRQ_PC10		BFIN_PC_IRQ(10)
+#define IRQ_PC11		BFIN_PC_IRQ(11)
+#define IRQ_PC12		BFIN_PC_IRQ(12)
+#define IRQ_PC13		BFIN_PC_IRQ(13)
+#define IRQ_PC14		BFIN_PC_IRQ(14)		/* N/A */
+#define IRQ_PC15		BFIN_PC_IRQ(15)		/* N/A */
+
+#define BFIN_PD_IRQ(x)		((x) + IRQ_PC15 + 1)
+#define IRQ_PD0			BFIN_PD_IRQ(0)
+#define IRQ_PD1			BFIN_PD_IRQ(1)
+#define IRQ_PD2			BFIN_PD_IRQ(2)
+#define IRQ_PD3			BFIN_PD_IRQ(3)
+#define IRQ_PD4			BFIN_PD_IRQ(4)
+#define IRQ_PD5			BFIN_PD_IRQ(5)
+#define IRQ_PD6			BFIN_PD_IRQ(6)
+#define IRQ_PD7			BFIN_PD_IRQ(7)
+#define IRQ_PD8			BFIN_PD_IRQ(8)
+#define IRQ_PD9			BFIN_PD_IRQ(9)
+#define IRQ_PD10		BFIN_PD_IRQ(10)
+#define IRQ_PD11		BFIN_PD_IRQ(11)
+#define IRQ_PD12		BFIN_PD_IRQ(12)
+#define IRQ_PD13		BFIN_PD_IRQ(13)
+#define IRQ_PD14		BFIN_PD_IRQ(14)
+#define IRQ_PD15		BFIN_PD_IRQ(15)
+
+#define BFIN_PE_IRQ(x)		((x) + IRQ_PD15 + 1)
+#define IRQ_PE0			BFIN_PE_IRQ(0)
+#define IRQ_PE1			BFIN_PE_IRQ(1)
+#define IRQ_PE2			BFIN_PE_IRQ(2)
+#define IRQ_PE3			BFIN_PE_IRQ(3)
+#define IRQ_PE4			BFIN_PE_IRQ(4)
+#define IRQ_PE5			BFIN_PE_IRQ(5)
+#define IRQ_PE6			BFIN_PE_IRQ(6)
+#define IRQ_PE7			BFIN_PE_IRQ(7)
+#define IRQ_PE8			BFIN_PE_IRQ(8)
+#define IRQ_PE9			BFIN_PE_IRQ(9)
+#define IRQ_PE10		BFIN_PE_IRQ(10)
+#define IRQ_PE11		BFIN_PE_IRQ(11)
+#define IRQ_PE12		BFIN_PE_IRQ(12)
+#define IRQ_PE13		BFIN_PE_IRQ(13)
+#define IRQ_PE14		BFIN_PE_IRQ(14)
+#define IRQ_PE15		BFIN_PE_IRQ(15)
+
+#define BFIN_PF_IRQ(x)		((x) + IRQ_PE15 + 1)
+#define IRQ_PF0			BFIN_PF_IRQ(0)
+#define IRQ_PF1			BFIN_PF_IRQ(1)
+#define IRQ_PF2			BFIN_PF_IRQ(2)
+#define IRQ_PF3			BFIN_PF_IRQ(3)
+#define IRQ_PF4			BFIN_PF_IRQ(4)
+#define IRQ_PF5			BFIN_PF_IRQ(5)
+#define IRQ_PF6			BFIN_PF_IRQ(6)
+#define IRQ_PF7			BFIN_PF_IRQ(7)
+#define IRQ_PF8			BFIN_PF_IRQ(8)
+#define IRQ_PF9			BFIN_PF_IRQ(9)
+#define IRQ_PF10		BFIN_PF_IRQ(10)
+#define IRQ_PF11		BFIN_PF_IRQ(11)
+#define IRQ_PF12		BFIN_PF_IRQ(12)
+#define IRQ_PF13		BFIN_PF_IRQ(13)
+#define IRQ_PF14		BFIN_PF_IRQ(14)
+#define IRQ_PF15		BFIN_PF_IRQ(15)
+
+#define BFIN_PG_IRQ(x)		((x) + IRQ_PF15 + 1)
+#define IRQ_PG0			BFIN_PG_IRQ(0)
+#define IRQ_PG1			BFIN_PG_IRQ(1)
+#define IRQ_PG2			BFIN_PG_IRQ(2)
+#define IRQ_PG3			BFIN_PG_IRQ(3)
+#define IRQ_PG4			BFIN_PG_IRQ(4)
+#define IRQ_PG5			BFIN_PG_IRQ(5)
+#define IRQ_PG6			BFIN_PG_IRQ(6)
+#define IRQ_PG7			BFIN_PG_IRQ(7)
+#define IRQ_PG8			BFIN_PG_IRQ(8)
+#define IRQ_PG9			BFIN_PG_IRQ(9)
+#define IRQ_PG10		BFIN_PG_IRQ(10)
+#define IRQ_PG11		BFIN_PG_IRQ(11)
+#define IRQ_PG12		BFIN_PG_IRQ(12)
+#define IRQ_PG13		BFIN_PG_IRQ(13)
+#define IRQ_PG14		BFIN_PG_IRQ(14)
+#define IRQ_PG15		BFIN_PG_IRQ(15)
+
+#define BFIN_PH_IRQ(x)		((x) + IRQ_PG15 + 1)
+#define IRQ_PH0			BFIN_PH_IRQ(0)
+#define IRQ_PH1			BFIN_PH_IRQ(1)
+#define IRQ_PH2			BFIN_PH_IRQ(2)
+#define IRQ_PH3			BFIN_PH_IRQ(3)
+#define IRQ_PH4			BFIN_PH_IRQ(4)
+#define IRQ_PH5			BFIN_PH_IRQ(5)
+#define IRQ_PH6			BFIN_PH_IRQ(6)
+#define IRQ_PH7			BFIN_PH_IRQ(7)
+#define IRQ_PH8			BFIN_PH_IRQ(8)
+#define IRQ_PH9			BFIN_PH_IRQ(9)
+#define IRQ_PH10		BFIN_PH_IRQ(10)
+#define IRQ_PH11		BFIN_PH_IRQ(11)
+#define IRQ_PH12		BFIN_PH_IRQ(12)
+#define IRQ_PH13		BFIN_PH_IRQ(13)
+#define IRQ_PH14		BFIN_PH_IRQ(14)		/* N/A */
+#define IRQ_PH15		BFIN_PH_IRQ(15)		/* N/A */
+
+#define BFIN_PI_IRQ(x)		((x) + IRQ_PH15 + 1)
+#define IRQ_PI0			BFIN_PI_IRQ(0)
+#define IRQ_PI1			BFIN_PI_IRQ(1)
+#define IRQ_PI2			BFIN_PI_IRQ(2)
+#define IRQ_PI3			BFIN_PI_IRQ(3)
+#define IRQ_PI4			BFIN_PI_IRQ(4)
+#define IRQ_PI5			BFIN_PI_IRQ(5)
+#define IRQ_PI6			BFIN_PI_IRQ(6)
+#define IRQ_PI7			BFIN_PI_IRQ(7)
+#define IRQ_PI8			BFIN_PI_IRQ(8)
+#define IRQ_PI9			BFIN_PI_IRQ(9)
+#define IRQ_PI10		BFIN_PI_IRQ(10)
+#define IRQ_PI11		BFIN_PI_IRQ(11)
+#define IRQ_PI12		BFIN_PI_IRQ(12)
+#define IRQ_PI13		BFIN_PI_IRQ(13)
+#define IRQ_PI14		BFIN_PI_IRQ(14)
+#define IRQ_PI15		BFIN_PI_IRQ(15)
+
+#define BFIN_PJ_IRQ(x)		((x) + IRQ_PI15 + 1)
+#define IRQ_PJ0			BFIN_PJ_IRQ(0)
+#define IRQ_PJ1			BFIN_PJ_IRQ(1)
+#define IRQ_PJ2			BFIN_PJ_IRQ(2)
+#define IRQ_PJ3			BFIN_PJ_IRQ(3)
+#define IRQ_PJ4			BFIN_PJ_IRQ(4)
+#define IRQ_PJ5			BFIN_PJ_IRQ(5)
+#define IRQ_PJ6			BFIN_PJ_IRQ(6)
+#define IRQ_PJ7			BFIN_PJ_IRQ(7)
+#define IRQ_PJ8			BFIN_PJ_IRQ(8)
+#define IRQ_PJ9			BFIN_PJ_IRQ(9)
+#define IRQ_PJ10		BFIN_PJ_IRQ(10)
+#define IRQ_PJ11		BFIN_PJ_IRQ(11)
+#define IRQ_PJ12		BFIN_PJ_IRQ(12)
+#define IRQ_PJ13		BFIN_PJ_IRQ(13)
+#define IRQ_PJ14		BFIN_PJ_IRQ(14)		/* N/A */
+#define IRQ_PJ15		BFIN_PJ_IRQ(15)		/* N/A */
+
+#define GPIO_IRQ_BASE	IRQ_PA0
+
+#define NR_IRQS     (IRQ_PJ15+1)
+
+/* For compatibility reasons with existing code */
+
+#define IRQ_DMAC0_ERR 		IRQ_DMAC0_ERROR
+#define IRQ_EPPI0_ERR 		IRQ_EPPI0_ERROR
+#define IRQ_SPORT0_ERR		IRQ_SPORT0_ERROR
+#define IRQ_SPORT1_ERR		IRQ_SPORT1_ERROR
+#define IRQ_SPI0_ERR  		IRQ_SPI0_ERROR
+#define IRQ_UART0_ERR 		IRQ_UART0_ERROR
+#define IRQ_DMAC1_ERR 		IRQ_DMAC1_ERROR
+#define IRQ_SPORT2_ERR		IRQ_SPORT2_ERROR
+#define IRQ_SPORT3_ERR		IRQ_SPORT3_ERROR
+#define IRQ_SPI1_ERR  		IRQ_SPI1_ERROR
+#define IRQ_SPI2_ERR  		IRQ_SPI2_ERROR
+#define IRQ_UART1_ERR 		IRQ_UART1_ERROR
+#define IRQ_UART2_ERR 		IRQ_UART2_ERROR
+#define IRQ_CAN0_ERR  		IRQ_CAN0_ERROR
+#define IRQ_MXVR_ERR  		IRQ_MXVR_ERROR
+#define IRQ_EPP1_ERR  		IRQ_EPP1_ERROR
+#define IRQ_EPP2_ERR  		IRQ_EPP2_ERROR
+#define IRQ_UART3_ERR 		IRQ_UART3_ERROR
+#define IRQ_HOST_ERR  		IRQ_HOST_ERROR
+#define IRQ_PIXC_ERR  		IRQ_PIXC_ERROR
+#define IRQ_NFC_ERR   		IRQ_NFC_ERROR
+#define IRQ_ATAPI_ERR 		IRQ_ATAPI_ERROR
+#define IRQ_CAN1_ERR  		IRQ_CAN1_ERROR
+#define IRQ_HS_DMA_ERR		IRQ_HS_DMA_ERROR
+
+
+#define IVG7            7
+#define IVG8            8
+#define IVG9            9
+#define IVG10           10
+#define IVG11           11
+#define IVG12           12
+#define IVG13           13
+#define IVG14           14
+#define IVG15           15
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMAC0_ERR_POS	4
+#define IRQ_EPPI0_ERR_POS	8
+#define IRQ_SPORT0_ERR_POS	12
+#define IRQ_SPORT1_ERR_POS	16
+#define IRQ_SPI0_ERR_POS	20
+#define IRQ_UART0_ERR_POS	24
+#define IRQ_RTC_POS		28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_EPPI0_POS		0
+#define IRQ_SPORT0_RX_POS	4
+#define IRQ_SPORT0_TX_POS	8
+#define IRQ_SPORT1_RX_POS	12
+#define IRQ_SPORT1_TX_POS	16
+#define IRQ_SPI0_POS		20
+#define IRQ_UART0_RX_POS	24
+#define IRQ_UART0_TX_POS	28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_TIMER8_POS		0
+#define IRQ_TIMER9_POS		4
+#define IRQ_TIMER10_POS		8
+#define IRQ_PINT0_POS		12
+#define IRQ_PINT1_POS		16
+#define IRQ_MDMAS0_POS		20
+#define IRQ_MDMAS1_POS		24
+#define IRQ_WATCH_POS		28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_DMAC1_ERR_POS	0
+#define IRQ_SPORT2_ERR_POS	4
+#define IRQ_SPORT3_ERR_POS	8
+#define IRQ_MXVR_DATA_POS	12
+#define IRQ_SPI1_ERR_POS	16
+#define IRQ_SPI2_ERR_POS	20
+#define IRQ_UART1_ERR_POS	24
+#define IRQ_UART2_ERR_POS	28
+
+/* IAR4 BIT FILEDS */
+#define IRQ_CAN0_ERR_POS	0
+#define IRQ_SPORT2_RX_POS	4
+#define IRQ_UART2_RX_POS	4
+#define IRQ_SPORT2_TX_POS	8
+#define IRQ_UART2_TX_POS	8
+#define IRQ_SPORT3_RX_POS	12
+#define IRQ_UART3_RX_POS	12
+#define IRQ_SPORT3_TX_POS	16
+#define IRQ_UART3_TX_POS	16
+#define IRQ_EPPI1_POS		20
+#define IRQ_EPPI2_POS		24
+#define IRQ_SPI1_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_SPI2_POS		0
+#define IRQ_UART1_RX_POS	4
+#define IRQ_UART1_TX_POS	8
+#define IRQ_ATAPI_RX_POS	12
+#define IRQ_ATAPI_TX_POS	16
+#define IRQ_TWI0_POS		20
+#define IRQ_TWI1_POS		24
+#define IRQ_CAN0_RX_POS		28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_CAN0_TX_POS		0
+#define IRQ_MDMAS2_POS		4
+#define IRQ_MDMAS3_POS		8
+#define IRQ_MXVR_ERR_POS	12
+#define IRQ_MXVR_MSG_POS	16
+#define IRQ_MXVR_PKT_POS	20
+#define IRQ_EPPI1_ERR_POS	24
+#define IRQ_EPPI2_ERR_POS	28
+
+/* IAR7 BIT FIELDS */
+#define IRQ_UART3_ERR_POS	0
+#define IRQ_HOST_ERR_POS	4
+#define IRQ_PIXC_ERR_POS	12
+#define IRQ_NFC_ERR_POS		16
+#define IRQ_ATAPI_ERR_POS	20
+#define IRQ_CAN1_ERR_POS	24
+#define IRQ_HS_DMA_ERR_POS	28
+
+/* IAR8 BIT FIELDS */
+#define IRQ_PIXC_IN0_POS	0
+#define IRQ_PIXC_IN1_POS	4
+#define IRQ_PIXC_OUT_POS	8
+#define IRQ_SDH_POS		12
+#define IRQ_CNT_POS		16
+#define IRQ_KEY_POS		20
+#define IRQ_CAN1_RX_POS		24
+#define IRQ_CAN1_TX_POS		28
+
+/* IAR9 BIT FIELDS */
+#define IRQ_SDH_MASK0_POS	0
+#define IRQ_SDH_MASK1_POS	4
+#define IRQ_USB_INT0_POS	12
+#define IRQ_USB_INT1_POS	16
+#define IRQ_USB_INT2_POS	20
+#define IRQ_USB_DMA_POS		24
+#define IRQ_OTPSEC_POS		28
+
+/* IAR10 BIT FIELDS */
+#define IRQ_TIMER0_POS		24
+#define IRQ_TIMER1_POS		28
+
+/* IAR11 BIT FIELDS */
+#define IRQ_TIMER2_POS		0
+#define IRQ_TIMER3_POS		4
+#define IRQ_TIMER4_POS		8
+#define IRQ_TIMER5_POS		12
+#define IRQ_TIMER6_POS		16
+#define IRQ_TIMER7_POS		20
+#define IRQ_PINT2_POS		24
+#define IRQ_PINT3_POS		28
+
+#endif /* _BF548_IRQ_H_ */
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_init.h b/arch/blackfin/mach-bf548/include/mach/mem_init.h
new file mode 100644
index 00000000000..ab0b863eee6
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/mem_init.h
@@ -0,0 +1,255 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#define MIN_DDR_SCLK(x)	(x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1)
+#define MAX_DDR_SCLK(x)	(x*(CONFIG_SCLK_HZ/1000/1000)/1000)
+#define DDR_CLK_HZ(x)	(1000*1000*1000/x)
+
+#if (CONFIG_MEM_MT46V32M16_6T)
+#define DDR_SIZE	DEVSZ_512
+#define DDR_WIDTH	DEVWD_16
+#define DDR_MAX_tCK	13
+
+#define DDR_tRC		DDR_TRC(MIN_DDR_SCLK(60))
+#define DDR_tRAS	DDR_TRAS(MIN_DDR_SCLK(42))
+#define DDR_tRP		DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC	DDR_TRFC(MIN_DDR_SCLK(72))
+#define DDR_tREFI	DDR_TREFI(MAX_DDR_SCLK(7800))
+
+#define DDR_tRCD	DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR	DDR_TWTR(1)
+#define DDR_tMRD	DDR_TMRD(MIN_DDR_SCLK(12))
+#define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if (CONFIG_MEM_MT46V32M16_5B)
+#define DDR_SIZE	DEVSZ_512
+#define DDR_WIDTH	DEVWD_16
+#define DDR_MAX_tCK	13
+
+#define DDR_tRC		DDR_TRC(MIN_DDR_SCLK(55))
+#define DDR_tRAS	DDR_TRAS(MIN_DDR_SCLK(40))
+#define DDR_tRP		DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC	DDR_TRFC(MIN_DDR_SCLK(70))
+#define DDR_tREFI	DDR_TREFI(MAX_DDR_SCLK(7800))
+
+#define DDR_tRCD	DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR	DDR_TWTR(2)
+#define DDR_tMRD	DDR_TMRD(MIN_DDR_SCLK(10))
+#define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+#define DDR_SIZE	DEVSZ_512
+#define DDR_WIDTH	DEVWD_16
+#define DDR_MAX_tCK	13
+
+#define DDR_tRCD	DDR_TRCD(3)
+#define DDR_tWTR	DDR_TWTR(2)
+#define DDR_tWR		DDR_TWR(2)
+#define DDR_tMRD	DDR_TMRD(2)
+#define DDR_tRP		DDR_TRP(3)
+#define DDR_tRAS	DDR_TRAS(7)
+#define DDR_tRC		DDR_TRC(10)
+#define DDR_tRFC	DDR_TRFC(12)
+#define DDR_tREFI	DDR_TREFI(1288)
+#endif
+
+#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK))
+# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)."
+#elif(CONFIG_SCLK_HZ <= 133333333)
+# define	DDR_CL		CL_2
+#else
+# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)."
+#endif
+
+
+#define mem_DDRCTL0	(DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI)
+#define mem_DDRCTL1	(DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \
+			| DDR_tMRD | DDR_tWR | DDR_tRCD)
+#define mem_DDRCTL2	DDR_CL
+
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
new file mode 100644
index 00000000000..f99f47bc3a0
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
@@ -0,0 +1,111 @@
+/*
+ * file:         include/asm-blackfin/mach-bf548/mem_map.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	Memory MAP Common header file for blackfin BF537/6/4 of processors.
+ * rev:
+ *
+ * modified:
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MEM_MAP_548_H_
+#define _MEM_MAP_548_H_
+
+#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
+#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x2C000000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK2_BASE	0x28000000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK1_BASE	0x24000000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x04000000	/* 64M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x1000
+
+/* L1 Instruction ROM */
+
+#define L1_ROM_START		0xFFA14000
+#define L1_ROM_LENGTH		0x10000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF548 processors */
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+
+/* Level 2 Memory */
+#if !defined(CONFIG_BF542)
+# define L2_START          0xFEB00000
+# if defined(CONFIG_BF544)
+#  define L2_LENGTH        0x10000
+# else
+#  define L2_LENGTH        0x20000
+# endif
+#endif
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START	0xFFB00000
+#define L1_SCRATCH_LENGTH	0x1000
+
+#endif/* _MEM_MAP_548_H_ */
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
new file mode 100644
index 00000000000..8177a567dcd
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -0,0 +1,286 @@
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+
+#define P_SPORT2_TFS	(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
+#define P_SPORT2_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
+#define P_SPORT2_DTPRI	(P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
+#define P_SPORT2_TSCLK	(P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0))
+#define P_SPORT2_RFS	(P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0))
+#define P_SPORT2_DRSEC	(P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0))
+#define P_SPORT2_DRPRI	(P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0))
+#define P_SPORT2_RSCLK	(P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0))
+#define P_SPORT3_TFS	(P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0))
+#define P_SPORT3_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0))
+#define P_SPORT3_DTPRI	(P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0))
+#define P_SPORT3_TSCLK	(P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0))
+#define P_SPORT3_RFS	(P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0))
+#define P_SPORT3_DRSEC	(P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0))
+#define P_SPORT3_DRPRI	(P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0))
+#define P_SPORT3_RSCLK	(P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0))
+#define P_TMR4	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1))
+#define P_TMR5	(P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1))
+#define P_TMR6	(P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1))
+#define P_TMR7	(P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1))
+
+#define P_TWI1_SCL	(P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0))
+#define P_TWI1_SDA	(P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0))
+#define P_UART3_RTS	(P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0))
+#define P_UART3_CTS	(P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0))
+#define P_UART2_TX	(P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0))
+#define P_UART2_RX	(P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0))
+#define P_UART3_TX	(P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0))
+#define P_UART3_RX	(P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0))
+#define P_SPI2_SS	(P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0))
+#define P_SPI2_SSEL1	(P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(0))
+#define P_SPI2_SSEL2	(P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0))
+#define P_SPI2_SSEL3	(P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0))
+#define P_SPI2_SCK	(P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(0))
+#define P_SPI2_MOSI	(P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0))
+#define P_SPI2_MISO	(P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0))
+#define P_TMR0	(P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1))
+#define P_TMR1	(P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(1))
+#define P_TMR2	(P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(1))
+#define P_TMR3	(P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(1))
+
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0))
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
+#define P_SD_D0	(P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(0))
+#define P_SD_D1	(P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
+#define P_SD_D2	(P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(0))
+#define P_SD_D3	(P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(0))
+#define P_SD_CLK	(P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0))
+#define P_SD_CMD	(P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0))
+#define P_MMCLK	(P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1))
+#define P_MBCLK	(P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1))
+
+#define P_PPI1_D0	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0))
+#define P_PPI1_D1	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0))
+#define P_PPI1_D2	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0))
+#define P_PPI1_D3	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0))
+#define P_PPI1_D4	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0))
+#define P_PPI1_D5	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0))
+#define P_PPI1_D6	(P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0))
+#define P_PPI1_D7	(P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(0))
+#define P_PPI1_D8	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(0))
+#define P_PPI1_D9	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0))
+#define P_PPI1_D10	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0))
+#define P_PPI1_D11	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0))
+#define P_PPI1_D12	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0))
+#define P_PPI1_D13	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0))
+#define P_PPI1_D14	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0))
+#define P_PPI1_D15	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(0))
+
+#define P_HOST_D8	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1))
+#define P_HOST_D9	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1))
+#define P_HOST_D10	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(1))
+#define P_HOST_D11	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(1))
+#define P_HOST_D12	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(1))
+#define P_HOST_D13	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(1))
+#define P_HOST_D14	(P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1))
+#define P_HOST_D15	(P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1))
+#define P_HOST_D0	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1))
+#define P_HOST_D1	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1))
+#define P_HOST_D2	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1))
+#define P_HOST_D3	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(1))
+#define P_HOST_D4	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1))
+#define P_HOST_D5	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(1))
+#define P_HOST_D6	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(1))
+#define P_HOST_D7	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(2))
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(2))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(2))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(2))
+#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(2))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(2))
+#define P_PPI2_D0	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(2))
+#define P_PPI2_D1	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2))
+#define P_PPI2_D2	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2))
+#define P_PPI2_D3	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(2))
+#define P_PPI2_D4	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(2))
+#define P_PPI2_D5	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(2))
+#define P_PPI2_D6	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(2))
+#define P_PPI2_D7	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2))
+#define P_PPI0_D18	(P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(3))
+#define P_PPI0_D19	(P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(3))
+#define P_PPI0_D20	(P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(3))
+#define P_PPI0_D21	(P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(3))
+#define P_PPI0_D22	(P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(3))
+#define P_PPI0_D23	(P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(3))
+#define P_KEY_ROW0	(P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(3))
+#define P_KEY_ROW1	(P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(3))
+#define P_KEY_ROW2	(P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(3))
+#define P_KEY_ROW3	(P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3))
+#define P_KEY_COL0	(P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3))
+#define P_KEY_COL1	(P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(3))
+#define P_KEY_COL2	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
+#define P_KEY_COL3	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
+
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(0))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(0))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(0))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(0))
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(0))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(0))
+#define P_UART1_RTS	(P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(0))
+#define P_UART1_CTS	(P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0))
+#define P_PPI1_CLK	(P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0))
+#define P_PPI1_FS1	(P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0))
+#define P_PPI1_FS2	(P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0))
+#define P_TWI0_SCL	(P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0))
+#define P_TWI0_SDA	(P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0))
+#define P_KEY_COL7	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1))
+#define P_KEY_ROW6	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1))
+#define P_KEY_COL6	(P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1))
+#define P_KEY_ROW5	(P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1))
+#define P_KEY_COL5	(P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1))
+#define P_KEY_ROW4	(P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1))
+#define P_KEY_COL4	(P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1))
+#define P_KEY_ROW7	(P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1))
+
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_ATAPI_D0A	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_ATAPI_D1A	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_ATAPI_D2A	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_ATAPI_D3A	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_ATAPI_D4A	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_ATAPI_D5A	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_ATAPI_D6A	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_ATAPI_D7A	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_ATAPI_D8A	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_ATAPI_D9A	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_ATAPI_D10A	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+#define P_ATAPI_D11A	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+#define P_ATAPI_D12A	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+#define P_ATAPI_D13A	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+#define P_ATAPI_D14A	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_ATAPI_D15A	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D16	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D17	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_SPI1_SSEL1	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_SPI1_SSEL2	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPI1_SSEL3	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_SPI1_SCK	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_SPI1_MISO	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_SPI1_MOSI	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_SPI1_SS	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_CAN0_TX	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_CAN0_RX	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_CAN1_TX	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_CAN1_RX	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_ATAPI_A0A	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+#define P_ATAPI_A1A	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+#define P_ATAPI_A2A	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#define P_HOST_CE	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
+#define P_HOST_RD	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_HOST_WR	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_MTXONB	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_PPI2_FS2	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2))
+#define P_PPI2_FS1	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_PPI2_CLK	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#define P_CNT_CZM	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(3))
+
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_ATAPI_RESET	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_HOST_ADDR	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_HOST_ACK	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MTX	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MRX	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MRXONB	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_A4	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_A5	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_A6	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_A7	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_A8	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_A9	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_PPI1_FS3	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_PPI2_FS3	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_TMR8	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+#define P_TMR9	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+#define P_TMR10	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_DMAR0	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_DMAR1	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_CNT_CDG	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_CNT_CUD	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+
+#define P_A10	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI0) | P_FUNCT(0))
+#define P_A11	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI1) | P_FUNCT(0))
+#define P_A12	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI2) | P_FUNCT(0))
+#define P_A13	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI3) | P_FUNCT(0))
+#define P_A14	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI4) | P_FUNCT(0))
+#define P_A15	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI5) | P_FUNCT(0))
+#define P_A16	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI6) | P_FUNCT(0))
+#define P_A17	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI7) | P_FUNCT(0))
+#define P_A18	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI8) | P_FUNCT(0))
+#define P_A19	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI9) | P_FUNCT(0))
+#define P_A20	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI10) | P_FUNCT(0))
+#define P_A21	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI11) | P_FUNCT(0))
+#define P_A22	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI12) | P_FUNCT(0))
+#define P_A23	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI13) | P_FUNCT(0))
+#define P_A24	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI14) | P_FUNCT(0))
+#define P_A25	(P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(0))
+#define P_NOR_CLK	(P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(1))
+
+#define P_AMC_ARDY_NOR_WAIT	(P_DEFINED | P_IDENT(GPIO_PJ0) | P_FUNCT(0))
+#define P_NAND_CE	(P_DEFINED | P_IDENT(GPIO_PJ1) | P_FUNCT(0))
+#define P_NAND_RB	(P_DEFINED | P_IDENT(GPIO_PJ2) | P_FUNCT(0))
+#define P_ATAPI_DIOR	(P_DEFINED | P_IDENT(GPIO_PJ3) | P_FUNCT(0))
+#define P_ATAPI_DIOW	(P_DEFINED | P_IDENT(GPIO_PJ4) | P_FUNCT(0))
+#define P_ATAPI_CS0	(P_DEFINED | P_IDENT(GPIO_PJ5) | P_FUNCT(0))
+#define P_ATAPI_CS1	(P_DEFINED | P_IDENT(GPIO_PJ6) | P_FUNCT(0))
+#define P_ATAPI_DMACK	(P_DEFINED | P_IDENT(GPIO_PJ7) | P_FUNCT(0))
+#define P_ATAPI_DMARQ	(P_DEFINED | P_IDENT(GPIO_PJ8) | P_FUNCT(0))
+#define P_ATAPI_INTRQ	(P_DEFINED | P_IDENT(GPIO_PJ9) | P_FUNCT(0))
+#define P_ATAPI_IORDY	(P_DEFINED | P_IDENT(GPIO_PJ10) | P_FUNCT(0))
+#define P_AMC_BR	(P_DEFINED | P_IDENT(GPIO_PJ11) | P_FUNCT(0))
+#define P_AMC_BG	(P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0))
+#define P_AMC_BGH	(P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0))
+
+
+#define P_NAND_D0	(P_DONTCARE)
+#define P_NAND_D1	(P_DONTCARE)
+#define P_NAND_D2	(P_DONTCARE)
+#define P_NAND_D3	(P_DONTCARE)
+#define P_NAND_D4	(P_DONTCARE)
+#define P_NAND_D5	(P_DONTCARE)
+#define P_NAND_D6	(P_DONTCARE)
+#define P_NAND_D7	(P_DONTCARE)
+#define P_NAND_WE	(P_DONTCARE)
+#define P_NAND_RE	(P_DONTCARE)
+#define P_NAND_CLE	(P_DONTCARE)
+#define P_NAND_ALE	(P_DONTCARE)
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c
index 2665653cee3..9dd0fa3ac4d 100644
--- a/arch/blackfin/mach-bf548/ints-priority.c
+++ b/arch/blackfin/mach-bf548/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 466ef5929a2..8f40990eea2 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -54,16 +54,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF561";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -306,7 +306,7 @@ static struct platform_device bfin_sir_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	119
+#define PATA_INT	IRQ_PF46
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 2,
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index bc6feded856..50b4cdceccf 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -35,7 +35,6 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/ata_platform.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
@@ -243,15 +242,15 @@ static struct platform_device bfin_sir_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
-		.name       = "Bootloader",
+		.name       = "bootloader(nor)",
 		.size       = 0x40000,
 		.offset     = 0,
 	}, {
-		.name       = "Kernel",
+		.name       = "linux kernel(nor)",
 		.size       = 0x1C0000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
-		.name       = "RootFS",
+		.name       = "file system(nor)",
 		.size       = MTDPART_SIZ_FULL,
 		.offset     = MTDPART_OFS_APPEND,
 	}
@@ -350,43 +349,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -499,10 +461,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -538,10 +496,6 @@ static int __init ezkit_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 5b8bd40851d..75ea6a90582 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -30,284 +30,13 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOGA_CTL);
-	p0.h = hi(WDOGA_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 	p0.h = hi(SICA_IWR0);
 	p0.l = lo(SICA_IWR0);
@@ -377,12 +106,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
new file mode 100644
index 00000000000..5c5d7d7d695
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -0,0 +1,274 @@
+/*
+ * File: include/asm-blackfin/mach-bf561/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ *  - Revision P, 02/08/2008; ADSP-BF561 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */
+#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4
+# error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
+#endif
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* Testset instructions restricted to 32-bit aligned memory locations */
+#define ANOMALY_05000120 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Erroneous exception when enabling cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* Signbits instruction not functional under certain conditions */
+#define ANOMALY_05000127 (1)
+/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */
+#define ANOMALY_05000134 (__SILICON_REVISION__ < 3)
+/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */
+#define ANOMALY_05000135 (__SILICON_REVISION__ < 3)
+/* Stall in multi-unit DMA operations */
+#define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* IMDMA S1/D1 channel may stall */
+#define ANOMALY_05000149 (1)
+/* DMA engine may lose data due to incorrect handshaking */
+#define ANOMALY_05000150 (__SILICON_REVISION__ < 3)
+/* DMA stalls when all three controllers read data from the same source */
+#define ANOMALY_05000151 (__SILICON_REVISION__ < 3)
+/* Execution stall when executing in L2 and doing external accesses */
+#define ANOMALY_05000152 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */
+#define ANOMALY_05000156 (__SILICON_REVISION__ < 4)
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000159 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000160 (__SILICON_REVISION__ < 3)
+/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */
+#define ANOMALY_05000161 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL<12> is not set on Reset */
+#define ANOMALY_05000162 (__SILICON_REVISION__ < 3)
+/* SPORT transmit data is not gated by external frame sync in certain conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning Serial Ports on with External Frame Syncs */
+#define ANOMALY_05000167 (1)
+/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
+/* DATA CPLB page miss can result in lost write-through cache data writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 5)
+/* Boot-ROM code modifies SICA_IWRx wakeup registers */
+#define ANOMALY_05000171 (__SILICON_REVISION__ < 5)
+/* DSPID register values incorrect */
+#define ANOMALY_05000172 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 5)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 5)
+/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 5)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Disabling the PPI resets the PPI configuration registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 5)
+/* IMDMA does not operate to full speed for 600MHz and higher devices */
+#define ANOMALY_05000182 (1)
+/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000184 (__SILICON_REVISION__ < 5)
+/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 5)
+/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */
+#define ANOMALY_05000186 (__SILICON_REVISION__ < 5)
+/* IMDMA Corrupted Data after a Halt */
+#define ANOMALY_05000187 (1)
+/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */
+#define ANOMALY_05000188 (__SILICON_REVISION__ < 5)
+/* False Protection Exceptions */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 5)
+/* PPI not functional at core voltage < 1Volt */
+#define ANOMALY_05000190 (1)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 5)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 5)
+/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 5)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 5)
+/* Specific sequence that can cause DMA error or DMA stopping */
+#define ANOMALY_05000205 (__SILICON_REVISION__ < 5)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 5)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 5)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (__SILICON_REVISION__ < 5)
+/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 5)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* SPORT data transmit lines are incorrectly driven in multichannel mode */
+#define ANOMALY_05000232 (__SILICON_REVISION__ < 5)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
+/* TESTSET operation forces stall on the other core */
+#define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5)
+/* Exception Not Generated for MMR Accesses in Reserved Region */
+#define ANOMALY_05000251 (__SILICON_REVISION__ < 5)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 3)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* IMDMA destination IRQ status must be read prior to using IMDMA */
+#define ANOMALY_05000266 (__SILICON_REVISION__ > 3)
+/* IMDMA may corrupt data under certain conditions */
+#define ANOMALY_05000267 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Data cache write back to external synchronous memory may be lost */
+#define ANOMALY_05000274 (1)
+/* PPI Timing and Sampling Information Updates */
+#define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
+/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
+/* False Hardware Error Exception When ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* A read will receive incorrect data under certain conditions */
+#define ANOMALY_05000287 (__SILICON_REVISION__ < 5)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 5)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (1)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* PF2 Output Remains Asserted After SPI Master Boot */
+#define ANOMALY_05000320 (__SILICON_REVISION__ > 3)
+/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */
+#define ANOMALY_05000323 (1)
+/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */
+#define ANOMALY_05000326 (__SILICON_REVISION__ > 3)
+/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */
+#define ANOMALY_05000331 (__SILICON_REVISION__ < 5)
+/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */
+#define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
+/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */
+#define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */
+#define ANOMALY_05000339 (__SILICON_REVISION__ < 5)
+/* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */
+#define ANOMALY_05000343 (__SILICON_REVISION__ < 5)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* Conflicting Column Address Widths Causes SDRAM Errors */
+#define ANOMALY_05000362 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
+
+#endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h
new file mode 100644
index 00000000000..3ef9e5f3613
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/bf561.h
@@ -0,0 +1,223 @@
+/*
+ * File:         include/asm-blackfin/mach-bf561/bf561.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __MACH_BF561_H__
+#define __MACH_BF561_H__
+
+#define SUPPORTED_REVID		0x3
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR		0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************
+ * Blackfin Cache setup
+ */
+
+
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/* IAR0 BIT FIELDS */
+#define	PLL_WAKEUP_BIT		0xFFFFFFFF
+#define	DMA1_ERROR_BIT		0xFFFFFF0F
+#define	DMA2_ERROR_BIT		0xFFFFF0FF
+#define IMDMA_ERROR_BIT		0xFFFF0FFF
+#define	PPI1_ERROR_BIT		0xFFF0FFFF
+#define	PPI2_ERROR_BIT		0xFF0FFFFF
+#define	SPORT0_ERROR_BIT	0xF0FFFFFF
+#define	SPORT1_ERROR_BIT	0x0FFFFFFF
+/* IAR1 BIT FIELDS */
+#define	SPI_ERROR_BIT		0xFFFFFFFF
+#define	UART_ERROR_BIT		0xFFFFFF0F
+#define RESERVED_ERROR_BIT	0xFFFFF0FF
+#define	DMA1_0_BIT		0xFFFF0FFF
+#define	DMA1_1_BIT		0xFFF0FFFF
+#define	DMA1_2_BIT		0xFF0FFFFF
+#define	DMA1_3_BIT		0xF0FFFFFF
+#define	DMA1_4_BIT		0x0FFFFFFF
+/* IAR2 BIT FIELDS */
+#define	DMA1_5_BIT		0xFFFFFFFF
+#define	DMA1_6_BIT		0xFFFFFF0F
+#define	DMA1_7_BIT		0xFFFFF0FF
+#define	DMA1_8_BIT		0xFFFF0FFF
+#define	DMA1_9_BIT		0xFFF0FFFF
+#define	DMA1_10_BIT		0xFF0FFFFF
+#define	DMA1_11_BIT		0xF0FFFFFF
+#define	DMA2_0_BIT		0x0FFFFFFF
+/* IAR3 BIT FIELDS */
+#define	DMA2_1_BIT		0xFFFFFFFF
+#define	DMA2_2_BIT		0xFFFFFF0F
+#define	DMA2_3_BIT		0xFFFFF0FF
+#define	DMA2_4_BIT		0xFFFF0FFF
+#define	DMA2_5_BIT		0xFFF0FFFF
+#define	DMA2_6_BIT		0xFF0FFFFF
+#define	DMA2_7_BIT		0xF0FFFFFF
+#define	DMA2_8_BIT		0x0FFFFFFF
+/* IAR4 BIT FIELDS */
+#define	DMA2_9_BIT		0xFFFFFFFF
+#define	DMA2_10_BIT             0xFFFFFF0F
+#define	DMA2_11_BIT             0xFFFFF0FF
+#define TIMER0_BIT	        0xFFFF0FFF
+#define TIMER1_BIT              0xFFF0FFFF
+#define TIMER2_BIT              0xFF0FFFFF
+#define TIMER3_BIT              0xF0FFFFFF
+#define TIMER4_BIT              0x0FFFFFFF
+/* IAR5 BIT FIELDS */
+#define TIMER5_BIT		0xFFFFFFFF
+#define TIMER6_BIT              0xFFFFFF0F
+#define TIMER7_BIT              0xFFFFF0FF
+#define TIMER8_BIT              0xFFFF0FFF
+#define TIMER9_BIT              0xFFF0FFFF
+#define TIMER10_BIT             0xFF0FFFFF
+#define TIMER11_BIT             0xF0FFFFFF
+#define	PROG0_INTA_BIT	        0x0FFFFFFF
+/* IAR6 BIT FIELDS */
+#define	PROG0_INTB_BIT		0xFFFFFFFF
+#define	PROG1_INTA_BIT          0xFFFFFF0F
+#define	PROG1_INTB_BIT          0xFFFFF0FF
+#define	PROG2_INTA_BIT          0xFFFF0FFF
+#define	PROG2_INTB_BIT          0xFFF0FFFF
+#define DMA1_WRRD0_BIT          0xFF0FFFFF
+#define DMA1_WRRD1_BIT          0xF0FFFFFF
+#define DMA2_WRRD0_BIT          0x0FFFFFFF
+/* IAR7 BIT FIELDS */
+#define DMA2_WRRD1_BIT		0xFFFFFFFF
+#define IMDMA_WRRD0_BIT         0xFFFFFF0F
+#define IMDMA_WRRD1_BIT         0xFFFFF0FF
+#define	WATCH_BIT	        0xFFFF0FFF
+#define RESERVED_1_BIT	        0xFFF0FFFF
+#define RESERVED_2_BIT	        0xFF0FFFFF
+#define SUPPLE_0_BIT	        0xF0FFFFFF
+#define SUPPLE_1_BIT	        0x0FFFFFFF
+
+/* Miscellaneous Values */
+
+/****************************** EBIU Settings ********************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#if defined(CONFIG_C_AMBEN_ALL)
+#define V_AMBEN AMBEN_ALL
+#elif defined(CONFIG_C_AMBEN)
+#define V_AMBEN 0x0
+#elif defined(CONFIG_C_AMBEN_B0)
+#define V_AMBEN AMBEN_B0
+#elif defined(CONFIG_C_AMBEN_B0_B1)
+#define V_AMBEN AMBEN_B0_B1
+#elif defined(CONFIG_C_AMBEN_B0_B1_B2)
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+
+#ifdef CONFIG_C_B0PEN
+#define V_B0PEN 0x10
+#else
+#define V_B0PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B1PEN
+#define V_B1PEN 0x20
+#else
+#define V_B1PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B2PEN
+#define V_B2PEN 0x40
+#else
+#define V_B2PEN 0x00
+#endif
+
+#ifdef CONFIG_C_B3PEN
+#define V_B3PEN 0x80
+#else
+#define V_B3PEN 0x00
+#endif
+
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002)
+
+#ifdef CONFIG_BF561
+#define CPU "BF561"
+#define CPUID 0x027bb000
+#endif
+#ifndef CPU
+#define CPU "UNKNOWN"
+#define CPUID 0x0
+#endif
+
+#endif				/* __MACH_BF561_H__  */
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
new file mode 100644
index 00000000000..8aa02780e64
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -0,0 +1,164 @@
+/*
+ * file:        include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ *	blackfin serial driver head file
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs:         enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose.  see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
+#define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
+#define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
+#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
+#define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+
+#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+# define CONFIG_SERIAL_BFIN_CTSRTS
+# ifndef CONFIG_UART0_CTS_PIN
+#  define CONFIG_UART0_CTS_PIN -1
+# endif
+# ifndef CONFIG_UART0_RTS_PIN
+#  define CONFIG_UART0_RTS_PIN -1
+# endif
+#endif
+
+struct bfin_serial_port {
+        struct uart_port        port;
+        unsigned int            old_status;
+	unsigned int lsr;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	int			tx_done;
+	int			tx_count;
+	struct circ_buf		rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int			rx_dma_nrows;
+	unsigned int		tx_dma_channel;
+	unsigned int		rx_dma_channel;
+	struct work_struct	tx_dma_workqueue;
+#else
+# if ANOMALY_05000230
+	unsigned int anomaly_threshold;
+# endif
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	struct timer_list       cts_timer;
+	int			cts_pin;
+	int			rts_pin;
+#endif
+};
+
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+	unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+	uart->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+	uart->lsr = 0;
+	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
+struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+struct bfin_serial_res {
+	unsigned long	uart_base_addr;
+	int		uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	unsigned int	uart_tx_dma_channel;
+	unsigned int	uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	int		uart_cts_pin;
+	int		uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+	{
+	0xFFC00400,
+	IRQ_UART_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART_TX,
+	CH_UART_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	CONFIG_UART0_CTS_PIN,
+	CONFIG_UART0_RTS_PIN,
+#endif
+	}
+};
+
+#define DRIVER_NAME "bfin-uart"
+
+int nr_ports = BFIN_UART_NR_PORTS;
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	if (uart->cts_pin >= 0) {
+		gpio_request(uart->cts_pin, DRIVER_NAME);
+		gpio_direction_input(uart->cts_pin);
+	}
+	if (uart->rts_pin >= 0) {
+		gpio_request(uart->rts_pin, DRIVER_NAME);
+		gpio_direction_input(uart->rts_pin, 0);
+	}
+#endif
+}
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_sir.h b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h
new file mode 100644
index 00000000000..9bb87e9e2e9
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h
@@ -0,0 +1,125 @@
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+	char *buf;
+	int head;
+	int tail;
+	};
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+	unsigned char __iomem   *membase;
+	unsigned int            irq;
+	unsigned int            lsr;
+	unsigned long           clk;
+	struct net_device       *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+	int                     tx_done;
+	struct dma_rx_buf       rx_dma_buf;
+	struct timer_list       rx_dma_timer;
+	int                     rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+	unsigned int            tx_dma_channel;
+	unsigned int            rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+	unsigned long   base_addr;
+	int             irq;
+	unsigned int    rx_dma_channel;
+	unsigned int    tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+	0xFFC00400,
+	IRQ_UART_RX,
+	CH_UART_RX,
+	CH_UART_TX,
+	},
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+	struct bfin_sir_port    *sir_port;
+	spinlock_t              lock;
+	unsigned int            open;
+	int                     speed;
+	int                     newspeed;
+
+	struct sk_buff          *txskb;
+	struct sk_buff          *rxskb;
+	struct net_device_stats stats;
+	struct device           *dev;
+	struct irlap_cb         *irlap;
+	struct qos_info         qos;
+
+	iobuff_t                tx_buff;
+	iobuff_t                rx_buff;
+
+	struct work_struct      work;
+	int                     mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+	port->lsr |= (lsr & (BI|FE|PE|OE));
+	return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+	port->lsr = 0;
+	bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+	int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+	if (ret)
+		return ret;
+	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+	if (ret)
+		return ret;
+#endif
+	return ret;
+}
diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
new file mode 100644
index 00000000000..0ea8666e676
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
@@ -0,0 +1,87 @@
+/*
+ * File:         include/asm-blackfin/mach-bf561/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF561_FAMILY
+
+#include "bf561.h"
+#include "mem_map.h"
+#include "defBF561.h"
+#include "anomaly.h"
+
+#if !defined(__ASSEMBLY__)
+#include "cdefBF561.h"
+#endif
+
+#define bfin_read_FIO_FLAG_D() bfin_read_FIO0_FLAG_D()
+#define bfin_write_FIO_FLAG_D(val) bfin_write_FIO0_FLAG_D(val)
+#define bfin_read_FIO_DIR() bfin_read_FIO0_DIR()
+#define bfin_write_FIO_DIR(val) bfin_write_FIO0_DIR(val)
+#define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
+#define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
+
+#define SIC_IWR0 SICA_IWR0
+#define SIC_IWR1 SICA_IWR1
+#define SIC_IAR0 SICA_IAR0
+#define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0
+#define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1
+#define bfin_write_SIC_IWR0   bfin_write_SICA_IWR0
+#define bfin_write_SIC_IWR1   bfin_write_SICA_IWR1
+
+#define bfin_read_SIC_IMASK0 bfin_read_SICA_IMASK0
+#define bfin_read_SIC_IMASK1 bfin_read_SICA_IMASK1
+#define bfin_read_SIC_IWR0   bfin_read_SICA_IWR0
+#define bfin_read_SIC_IWR1   bfin_read_SICA_IWR1
+#define bfin_read_SIC_ISR0   bfin_read_SICA_ISR0
+#define bfin_read_SIC_ISR1   bfin_read_SICA_ISR1
+
+#define bfin_read_SIC_IMASK(x)		bfin_read32(SICA_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val)	bfin_write32((SICA_IMASK0 + (x << 2)), val)
+#define bfin_read_SIC_ISR(x)		bfin_read32(SICA_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val)	bfin_write32((SICA_ISR0 + (x << 2)), val)
+
+#define BFIN_UART_NR_PORTS      1
+
+#define OFFSET_THR              0x00	/* Transmit Holding register            */
+#define OFFSET_RBR              0x00	/* Receive Buffer register              */
+#define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
+#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
+#define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
+#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
+#define OFFSET_LCR              0x0C	/* Line Control Register                */
+#define OFFSET_MCR              0x10	/* Modem Control Register               */
+#define OFFSET_LSR              0x14	/* Line Status Register                 */
+#define OFFSET_MSR              0x18	/* Modem Status Register                */
+#define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
+#define OFFSET_GCTL             0x24	/* Global Control Register              */
+
+#endif				/* _MACH_BLACKFIN_H_ */
diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
new file mode 100644
index 00000000000..c14d63402e7
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -0,0 +1,1579 @@
+/*
+ * File:         include/asm-blackfin/mach-bf561/cdefBF561.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:  C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF561_H
+#define _CDEF_BF561_H
+
+#include <asm/blackfin.h>
+
+/* include all Core registers and bit definitions */
+#include "defBF561.h"
+
+/*include core specific register pointer definitions*/
+#include <asm/cdef_LPBlackfin.h>
+
+#include <asm/system.h>
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SICA_IWR0);
+	iwr1 = bfin_read32(SICA_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SICA_IWR0, IWR_ENABLE(0));
+	bfin_write32(SICA_IWR1, 0);
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SICA_IWR0, iwr0);
+	bfin_write32(SICA_IWR1, iwr1);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_DIV()                  bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)              bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL()                   bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	local_irq_save(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SICA_IWR0);
+	iwr1 = bfin_read32(SICA_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SICA_IWR0, IWR_ENABLE(0));
+	bfin_write32(SICA_IWR1, 0);
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SICA_IWR0, iwr0);
+	bfin_write32(SICA_IWR1, iwr1);
+	local_irq_restore(flags);
+}
+#define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)             bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT()              bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)          bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID()                   bfin_read32(CHIPID)
+
+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define bfin_read_SWRST()                    bfin_read_SICA_SWRST()
+#define bfin_write_SWRST(val)                bfin_write_SICA_SWRST(val)
+#define bfin_read_SYSCR()                    bfin_read_SICA_SYSCR()
+#define bfin_write_SYSCR(val)                bfin_write_SICA_SYSCR(val)
+
+/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
+#define bfin_read_SICA_SWRST()               bfin_read16(SICA_SWRST)
+#define bfin_write_SICA_SWRST(val)           bfin_write16(SICA_SWRST,val)
+#define bfin_read_SICA_SYSCR()               bfin_read16(SICA_SYSCR)
+#define bfin_write_SICA_SYSCR(val)           bfin_write16(SICA_SYSCR,val)
+#define bfin_read_SICA_RVECT()               bfin_read16(SICA_RVECT)
+#define bfin_write_SICA_RVECT(val)           bfin_write16(SICA_RVECT,val)
+#define bfin_read_SICA_IMASK()               bfin_read32(SICA_IMASK)
+#define bfin_write_SICA_IMASK(val)           bfin_write32(SICA_IMASK,val)
+#define bfin_read_SICA_IMASK0()              bfin_read32(SICA_IMASK0)
+#define bfin_write_SICA_IMASK0(val)          bfin_write32(SICA_IMASK0,val)
+#define bfin_read_SICA_IMASK1()              bfin_read32(SICA_IMASK1)
+#define bfin_write_SICA_IMASK1(val)          bfin_write32(SICA_IMASK1,val)
+#define bfin_read_SICA_IAR0()                bfin_read32(SICA_IAR0)
+#define bfin_write_SICA_IAR0(val)            bfin_write32(SICA_IAR0,val)
+#define bfin_read_SICA_IAR1()                bfin_read32(SICA_IAR1)
+#define bfin_write_SICA_IAR1(val)            bfin_write32(SICA_IAR1,val)
+#define bfin_read_SICA_IAR2()                bfin_read32(SICA_IAR2)
+#define bfin_write_SICA_IAR2(val)            bfin_write32(SICA_IAR2,val)
+#define bfin_read_SICA_IAR3()                bfin_read32(SICA_IAR3)
+#define bfin_write_SICA_IAR3(val)            bfin_write32(SICA_IAR3,val)
+#define bfin_read_SICA_IAR4()                bfin_read32(SICA_IAR4)
+#define bfin_write_SICA_IAR4(val)            bfin_write32(SICA_IAR4,val)
+#define bfin_read_SICA_IAR5()                bfin_read32(SICA_IAR5)
+#define bfin_write_SICA_IAR5(val)            bfin_write32(SICA_IAR5,val)
+#define bfin_read_SICA_IAR6()                bfin_read32(SICA_IAR6)
+#define bfin_write_SICA_IAR6(val)            bfin_write32(SICA_IAR6,val)
+#define bfin_read_SICA_IAR7()                bfin_read32(SICA_IAR7)
+#define bfin_write_SICA_IAR7(val)            bfin_write32(SICA_IAR7,val)
+#define bfin_read_SICA_ISR0()                bfin_read32(SICA_ISR0)
+#define bfin_write_SICA_ISR0(val)            bfin_write32(SICA_ISR0,val)
+#define bfin_read_SICA_ISR1()                bfin_read32(SICA_ISR1)
+#define bfin_write_SICA_ISR1(val)            bfin_write32(SICA_ISR1,val)
+#define bfin_read_SICA_IWR0()                bfin_read32(SICA_IWR0)
+#define bfin_write_SICA_IWR0(val)            bfin_write32(SICA_IWR0,val)
+#define bfin_read_SICA_IWR1()                bfin_read32(SICA_IWR1)
+#define bfin_write_SICA_IWR1(val)            bfin_write32(SICA_IWR1,val)
+
+/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
+#define bfin_read_SICB_SWRST()               bfin_read16(SICB_SWRST)
+#define bfin_write_SICB_SWRST(val)           bfin_write16(SICB_SWRST,val)
+#define bfin_read_SICB_SYSCR()               bfin_read16(SICB_SYSCR)
+#define bfin_write_SICB_SYSCR(val)           bfin_write16(SICB_SYSCR,val)
+#define bfin_read_SICB_RVECT()               bfin_read16(SICB_RVECT)
+#define bfin_write_SICB_RVECT(val)           bfin_write16(SICB_RVECT,val)
+#define bfin_read_SICB_IMASK0()              bfin_read32(SICB_IMASK0)
+#define bfin_write_SICB_IMASK0(val)          bfin_write32(SICB_IMASK0,val)
+#define bfin_read_SICB_IMASK1()              bfin_read32(SICB_IMASK1)
+#define bfin_write_SICB_IMASK1(val)          bfin_write32(SICB_IMASK1,val)
+#define bfin_read_SICB_IAR0()                bfin_read32(SICB_IAR0)
+#define bfin_write_SICB_IAR0(val)            bfin_write32(SICB_IAR0,val)
+#define bfin_read_SICB_IAR1()                bfin_read32(SICB_IAR1)
+#define bfin_write_SICB_IAR1(val)            bfin_write32(SICB_IAR1,val)
+#define bfin_read_SICB_IAR2()                bfin_read32(SICB_IAR2)
+#define bfin_write_SICB_IAR2(val)            bfin_write32(SICB_IAR2,val)
+#define bfin_read_SICB_IAR3()                bfin_read32(SICB_IAR3)
+#define bfin_write_SICB_IAR3(val)            bfin_write32(SICB_IAR3,val)
+#define bfin_read_SICB_IAR4()                bfin_read32(SICB_IAR4)
+#define bfin_write_SICB_IAR4(val)            bfin_write32(SICB_IAR4,val)
+#define bfin_read_SICB_IAR5()                bfin_read32(SICB_IAR5)
+#define bfin_write_SICB_IAR5(val)            bfin_write32(SICB_IAR5,val)
+#define bfin_read_SICB_IAR6()                bfin_read32(SICB_IAR6)
+#define bfin_write_SICB_IAR6(val)            bfin_write32(SICB_IAR6,val)
+#define bfin_read_SICB_IAR7()                bfin_read32(SICB_IAR7)
+#define bfin_write_SICB_IAR7(val)            bfin_write32(SICB_IAR7,val)
+#define bfin_read_SICB_ISR0()                bfin_read32(SICB_ISR0)
+#define bfin_write_SICB_ISR0(val)            bfin_write32(SICB_ISR0,val)
+#define bfin_read_SICB_ISR1()                bfin_read32(SICB_ISR1)
+#define bfin_write_SICB_ISR1(val)            bfin_write32(SICB_ISR1,val)
+#define bfin_read_SICB_IWR0()                bfin_read32(SICB_IWR0)
+#define bfin_write_SICB_IWR0(val)            bfin_write32(SICB_IWR0,val)
+#define bfin_read_SICB_IWR1()                bfin_read32(SICB_IWR1)
+#define bfin_write_SICB_IWR1(val)            bfin_write32(SICB_IWR1,val)
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define bfin_read_WDOGA_CTL()                bfin_read16(WDOGA_CTL)
+#define bfin_write_WDOGA_CTL(val)            bfin_write16(WDOGA_CTL,val)
+#define bfin_read_WDOGA_CNT()                bfin_read32(WDOGA_CNT)
+#define bfin_write_WDOGA_CNT(val)            bfin_write32(WDOGA_CNT,val)
+#define bfin_read_WDOGA_STAT()               bfin_read32(WDOGA_STAT)
+#define bfin_write_WDOGA_STAT(val)           bfin_write32(WDOGA_STAT,val)
+
+/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
+#define bfin_read_WDOGB_CTL()                bfin_read16(WDOGB_CTL)
+#define bfin_write_WDOGB_CTL(val)            bfin_write16(WDOGB_CTL,val)
+#define bfin_read_WDOGB_CNT()                bfin_read32(WDOGB_CNT)
+#define bfin_write_WDOGB_CNT(val)            bfin_write32(WDOGB_CNT,val)
+#define bfin_read_WDOGB_STAT()               bfin_read32(WDOGB_STAT)
+#define bfin_write_WDOGB_STAT(val)           bfin_write32(WDOGB_STAT,val)
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+#define bfin_read_UART_THR()                 bfin_read16(UART_THR)
+#define bfin_write_UART_THR(val)             bfin_write16(UART_THR,val)
+#define bfin_read_UART_RBR()                 bfin_read16(UART_RBR)
+#define bfin_write_UART_RBR(val)             bfin_write16(UART_RBR,val)
+#define bfin_read_UART_DLL()                 bfin_read16(UART_DLL)
+#define bfin_write_UART_DLL(val)             bfin_write16(UART_DLL,val)
+#define bfin_read_UART_IER()                 bfin_read16(UART_IER)
+#define bfin_write_UART_IER(val)             bfin_write16(UART_IER,val)
+#define bfin_read_UART_DLH()                 bfin_read16(UART_DLH)
+#define bfin_write_UART_DLH(val)             bfin_write16(UART_DLH,val)
+#define bfin_read_UART_IIR()                 bfin_read16(UART_IIR)
+#define bfin_write_UART_IIR(val)             bfin_write16(UART_IIR,val)
+#define bfin_read_UART_LCR()                 bfin_read16(UART_LCR)
+#define bfin_write_UART_LCR(val)             bfin_write16(UART_LCR,val)
+#define bfin_read_UART_MCR()                 bfin_read16(UART_MCR)
+#define bfin_write_UART_MCR(val)             bfin_write16(UART_MCR,val)
+#define bfin_read_UART_LSR()                 bfin_read16(UART_LSR)
+#define bfin_write_UART_LSR(val)             bfin_write16(UART_LSR,val)
+#define bfin_read_UART_MSR()                 bfin_read16(UART_MSR)
+#define bfin_write_UART_MSR(val)             bfin_write16(UART_MSR,val)
+#define bfin_read_UART_SCR()                 bfin_read16(UART_SCR)
+#define bfin_write_UART_SCR(val)             bfin_write16(UART_SCR,val)
+#define bfin_read_UART_GCTL()                bfin_read16(UART_GCTL)
+#define bfin_write_UART_GCTL(val)            bfin_write16(UART_GCTL,val)
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define bfin_read_SPI_CTL()                  bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)              bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG()                  bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)              bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT()                 bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)             bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR()                 bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)             bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR()                 bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)             bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD()                 bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)             bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW()               bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)           bfin_write16(SPI_SHADOW,val)
+
+/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
+#define bfin_read_TIMER0_CONFIG()            bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)        bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER()           bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)       bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD()            bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)        bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH()             bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)         bfin_write32(TIMER0_WIDTH,val)
+#define bfin_read_TIMER1_CONFIG()            bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)        bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER()           bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)       bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD()            bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)        bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH()             bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)         bfin_write32(TIMER1_WIDTH,val)
+#define bfin_read_TIMER2_CONFIG()            bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)        bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER()           bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)       bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD()            bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)        bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH()             bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)         bfin_write32(TIMER2_WIDTH,val)
+#define bfin_read_TIMER3_CONFIG()            bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val)        bfin_write16(TIMER3_CONFIG,val)
+#define bfin_read_TIMER3_COUNTER()           bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val)       bfin_write32(TIMER3_COUNTER,val)
+#define bfin_read_TIMER3_PERIOD()            bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val)        bfin_write32(TIMER3_PERIOD,val)
+#define bfin_read_TIMER3_WIDTH()             bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val)         bfin_write32(TIMER3_WIDTH,val)
+#define bfin_read_TIMER4_CONFIG()            bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val)        bfin_write16(TIMER4_CONFIG,val)
+#define bfin_read_TIMER4_COUNTER()           bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val)       bfin_write32(TIMER4_COUNTER,val)
+#define bfin_read_TIMER4_PERIOD()            bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val)        bfin_write32(TIMER4_PERIOD,val)
+#define bfin_read_TIMER4_WIDTH()             bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val)         bfin_write32(TIMER4_WIDTH,val)
+#define bfin_read_TIMER5_CONFIG()            bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val)        bfin_write16(TIMER5_CONFIG,val)
+#define bfin_read_TIMER5_COUNTER()           bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val)       bfin_write32(TIMER5_COUNTER,val)
+#define bfin_read_TIMER5_PERIOD()            bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val)        bfin_write32(TIMER5_PERIOD,val)
+#define bfin_read_TIMER5_WIDTH()             bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val)         bfin_write32(TIMER5_WIDTH,val)
+#define bfin_read_TIMER6_CONFIG()            bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val)        bfin_write16(TIMER6_CONFIG,val)
+#define bfin_read_TIMER6_COUNTER()           bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val)       bfin_write32(TIMER6_COUNTER,val)
+#define bfin_read_TIMER6_PERIOD()            bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val)        bfin_write32(TIMER6_PERIOD,val)
+#define bfin_read_TIMER6_WIDTH()             bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val)         bfin_write32(TIMER6_WIDTH,val)
+#define bfin_read_TIMER7_CONFIG()            bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val)        bfin_write16(TIMER7_CONFIG,val)
+#define bfin_read_TIMER7_COUNTER()           bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val)       bfin_write32(TIMER7_COUNTER,val)
+#define bfin_read_TIMER7_PERIOD()            bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val)        bfin_write32(TIMER7_PERIOD,val)
+#define bfin_read_TIMER7_WIDTH()             bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val)         bfin_write32(TIMER7_WIDTH,val)
+
+/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
+#define bfin_read_TMRS8_ENABLE()             bfin_read16(TMRS8_ENABLE)
+#define bfin_write_TMRS8_ENABLE(val)         bfin_write16(TMRS8_ENABLE,val)
+#define bfin_read_TMRS8_DISABLE()            bfin_read16(TMRS8_DISABLE)
+#define bfin_write_TMRS8_DISABLE(val)        bfin_write16(TMRS8_DISABLE,val)
+#define bfin_read_TMRS8_STATUS()             bfin_read32(TMRS8_STATUS)
+#define bfin_write_TMRS8_STATUS(val)         bfin_write32(TMRS8_STATUS,val)
+#define bfin_read_TIMER8_CONFIG()            bfin_read16(TIMER8_CONFIG)
+#define bfin_write_TIMER8_CONFIG(val)        bfin_write16(TIMER8_CONFIG,val)
+#define bfin_read_TIMER8_COUNTER()           bfin_read32(TIMER8_COUNTER)
+#define bfin_write_TIMER8_COUNTER(val)       bfin_write32(TIMER8_COUNTER,val)
+#define bfin_read_TIMER8_PERIOD()            bfin_read32(TIMER8_PERIOD)
+#define bfin_write_TIMER8_PERIOD(val)        bfin_write32(TIMER8_PERIOD,val)
+#define bfin_read_TIMER8_WIDTH()             bfin_read32(TIMER8_WIDTH)
+#define bfin_write_TIMER8_WIDTH(val)         bfin_write32(TIMER8_WIDTH,val)
+#define bfin_read_TIMER9_CONFIG()            bfin_read16(TIMER9_CONFIG)
+#define bfin_write_TIMER9_CONFIG(val)        bfin_write16(TIMER9_CONFIG,val)
+#define bfin_read_TIMER9_COUNTER()           bfin_read32(TIMER9_COUNTER)
+#define bfin_write_TIMER9_COUNTER(val)       bfin_write32(TIMER9_COUNTER,val)
+#define bfin_read_TIMER9_PERIOD()            bfin_read32(TIMER9_PERIOD)
+#define bfin_write_TIMER9_PERIOD(val)        bfin_write32(TIMER9_PERIOD,val)
+#define bfin_read_TIMER9_WIDTH()             bfin_read32(TIMER9_WIDTH)
+#define bfin_write_TIMER9_WIDTH(val)         bfin_write32(TIMER9_WIDTH,val)
+#define bfin_read_TIMER10_CONFIG()           bfin_read16(TIMER10_CONFIG)
+#define bfin_write_TIMER10_CONFIG(val)       bfin_write16(TIMER10_CONFIG,val)
+#define bfin_read_TIMER10_COUNTER()          bfin_read32(TIMER10_COUNTER)
+#define bfin_write_TIMER10_COUNTER(val)      bfin_write32(TIMER10_COUNTER,val)
+#define bfin_read_TIMER10_PERIOD()           bfin_read32(TIMER10_PERIOD)
+#define bfin_write_TIMER10_PERIOD(val)       bfin_write32(TIMER10_PERIOD,val)
+#define bfin_read_TIMER10_WIDTH()            bfin_read32(TIMER10_WIDTH)
+#define bfin_write_TIMER10_WIDTH(val)        bfin_write32(TIMER10_WIDTH,val)
+#define bfin_read_TIMER11_CONFIG()           bfin_read16(TIMER11_CONFIG)
+#define bfin_write_TIMER11_CONFIG(val)       bfin_write16(TIMER11_CONFIG,val)
+#define bfin_read_TIMER11_COUNTER()          bfin_read32(TIMER11_COUNTER)
+#define bfin_write_TIMER11_COUNTER(val)      bfin_write32(TIMER11_COUNTER,val)
+#define bfin_read_TIMER11_PERIOD()           bfin_read32(TIMER11_PERIOD)
+#define bfin_write_TIMER11_PERIOD(val)       bfin_write32(TIMER11_PERIOD,val)
+#define bfin_read_TIMER11_WIDTH()            bfin_read32(TIMER11_WIDTH)
+#define bfin_write_TIMER11_WIDTH(val)        bfin_write32(TIMER11_WIDTH,val)
+#define bfin_read_TMRS4_ENABLE()             bfin_read16(TMRS4_ENABLE)
+#define bfin_write_TMRS4_ENABLE(val)         bfin_write16(TMRS4_ENABLE,val)
+#define bfin_read_TMRS4_DISABLE()            bfin_read16(TMRS4_DISABLE)
+#define bfin_write_TMRS4_DISABLE(val)        bfin_write16(TMRS4_DISABLE,val)
+#define bfin_read_TMRS4_STATUS()             bfin_read32(TMRS4_STATUS)
+#define bfin_write_TMRS4_STATUS(val)         bfin_write32(TMRS4_STATUS,val)
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define bfin_read_FIO0_FLAG_D()              bfin_read16(FIO0_FLAG_D)
+#define bfin_write_FIO0_FLAG_D(val)          bfin_write16(FIO0_FLAG_D,val)
+#define bfin_read_FIO0_FLAG_C()              bfin_read16(FIO0_FLAG_C)
+#define bfin_write_FIO0_FLAG_C(val)          bfin_write16(FIO0_FLAG_C,val)
+#define bfin_read_FIO0_FLAG_S()              bfin_read16(FIO0_FLAG_S)
+#define bfin_write_FIO0_FLAG_S(val)          bfin_write16(FIO0_FLAG_S,val)
+#define bfin_read_FIO0_FLAG_T()              bfin_read16(FIO0_FLAG_T)
+#define bfin_write_FIO0_FLAG_T(val)          bfin_write16(FIO0_FLAG_T,val)
+#define bfin_read_FIO0_MASKA_D()             bfin_read16(FIO0_MASKA_D)
+#define bfin_write_FIO0_MASKA_D(val)         bfin_write16(FIO0_MASKA_D,val)
+#define bfin_read_FIO0_MASKA_C()             bfin_read16(FIO0_MASKA_C)
+#define bfin_write_FIO0_MASKA_C(val)         bfin_write16(FIO0_MASKA_C,val)
+#define bfin_read_FIO0_MASKA_S()             bfin_read16(FIO0_MASKA_S)
+#define bfin_write_FIO0_MASKA_S(val)         bfin_write16(FIO0_MASKA_S,val)
+#define bfin_read_FIO0_MASKA_T()             bfin_read16(FIO0_MASKA_T)
+#define bfin_write_FIO0_MASKA_T(val)         bfin_write16(FIO0_MASKA_T,val)
+#define bfin_read_FIO0_MASKB_D()             bfin_read16(FIO0_MASKB_D)
+#define bfin_write_FIO0_MASKB_D(val)         bfin_write16(FIO0_MASKB_D,val)
+#define bfin_read_FIO0_MASKB_C()             bfin_read16(FIO0_MASKB_C)
+#define bfin_write_FIO0_MASKB_C(val)         bfin_write16(FIO0_MASKB_C,val)
+#define bfin_read_FIO0_MASKB_S()             bfin_read16(FIO0_MASKB_S)
+#define bfin_write_FIO0_MASKB_S(val)         bfin_write16(FIO0_MASKB_S,val)
+#define bfin_read_FIO0_MASKB_T()             bfin_read16(FIO0_MASKB_T)
+#define bfin_write_FIO0_MASKB_T(val)         bfin_write16(FIO0_MASKB_T,val)
+#define bfin_read_FIO0_DIR()                 bfin_read16(FIO0_DIR)
+#define bfin_write_FIO0_DIR(val)             bfin_write16(FIO0_DIR,val)
+#define bfin_read_FIO0_POLAR()               bfin_read16(FIO0_POLAR)
+#define bfin_write_FIO0_POLAR(val)           bfin_write16(FIO0_POLAR,val)
+#define bfin_read_FIO0_EDGE()                bfin_read16(FIO0_EDGE)
+#define bfin_write_FIO0_EDGE(val)            bfin_write16(FIO0_EDGE,val)
+#define bfin_read_FIO0_BOTH()                bfin_read16(FIO0_BOTH)
+#define bfin_write_FIO0_BOTH(val)            bfin_write16(FIO0_BOTH,val)
+#define bfin_read_FIO0_INEN()                bfin_read16(FIO0_INEN)
+#define bfin_write_FIO0_INEN(val)            bfin_write16(FIO0_INEN,val)
+/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
+#define bfin_read_FIO1_FLAG_D()              bfin_read16(FIO1_FLAG_D)
+#define bfin_write_FIO1_FLAG_D(val)          bfin_write16(FIO1_FLAG_D,val)
+#define bfin_read_FIO1_FLAG_C()              bfin_read16(FIO1_FLAG_C)
+#define bfin_write_FIO1_FLAG_C(val)          bfin_write16(FIO1_FLAG_C,val)
+#define bfin_read_FIO1_FLAG_S()              bfin_read16(FIO1_FLAG_S)
+#define bfin_write_FIO1_FLAG_S(val)          bfin_write16(FIO1_FLAG_S,val)
+#define bfin_read_FIO1_FLAG_T()              bfin_read16(FIO1_FLAG_T)
+#define bfin_write_FIO1_FLAG_T(val)          bfin_write16(FIO1_FLAG_T,val)
+#define bfin_read_FIO1_MASKA_D()             bfin_read16(FIO1_MASKA_D)
+#define bfin_write_FIO1_MASKA_D(val)         bfin_write16(FIO1_MASKA_D,val)
+#define bfin_read_FIO1_MASKA_C()             bfin_read16(FIO1_MASKA_C)
+#define bfin_write_FIO1_MASKA_C(val)         bfin_write16(FIO1_MASKA_C,val)
+#define bfin_read_FIO1_MASKA_S()             bfin_read16(FIO1_MASKA_S)
+#define bfin_write_FIO1_MASKA_S(val)         bfin_write16(FIO1_MASKA_S,val)
+#define bfin_read_FIO1_MASKA_T()             bfin_read16(FIO1_MASKA_T)
+#define bfin_write_FIO1_MASKA_T(val)         bfin_write16(FIO1_MASKA_T,val)
+#define bfin_read_FIO1_MASKB_D()             bfin_read16(FIO1_MASKB_D)
+#define bfin_write_FIO1_MASKB_D(val)         bfin_write16(FIO1_MASKB_D,val)
+#define bfin_read_FIO1_MASKB_C()             bfin_read16(FIO1_MASKB_C)
+#define bfin_write_FIO1_MASKB_C(val)         bfin_write16(FIO1_MASKB_C,val)
+#define bfin_read_FIO1_MASKB_S()             bfin_read16(FIO1_MASKB_S)
+#define bfin_write_FIO1_MASKB_S(val)         bfin_write16(FIO1_MASKB_S,val)
+#define bfin_read_FIO1_MASKB_T()             bfin_read16(FIO1_MASKB_T)
+#define bfin_write_FIO1_MASKB_T(val)         bfin_write16(FIO1_MASKB_T,val)
+#define bfin_read_FIO1_DIR()                 bfin_read16(FIO1_DIR)
+#define bfin_write_FIO1_DIR(val)             bfin_write16(FIO1_DIR,val)
+#define bfin_read_FIO1_POLAR()               bfin_read16(FIO1_POLAR)
+#define bfin_write_FIO1_POLAR(val)           bfin_write16(FIO1_POLAR,val)
+#define bfin_read_FIO1_EDGE()                bfin_read16(FIO1_EDGE)
+#define bfin_write_FIO1_EDGE(val)            bfin_write16(FIO1_EDGE,val)
+#define bfin_read_FIO1_BOTH()                bfin_read16(FIO1_BOTH)
+#define bfin_write_FIO1_BOTH(val)            bfin_write16(FIO1_BOTH,val)
+#define bfin_read_FIO1_INEN()                bfin_read16(FIO1_INEN)
+#define bfin_write_FIO1_INEN(val)            bfin_write16(FIO1_INEN,val)
+/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
+#define bfin_read_FIO2_FLAG_D()              bfin_read16(FIO2_FLAG_D)
+#define bfin_write_FIO2_FLAG_D(val)          bfin_write16(FIO2_FLAG_D,val)
+#define bfin_read_FIO2_FLAG_C()              bfin_read16(FIO2_FLAG_C)
+#define bfin_write_FIO2_FLAG_C(val)          bfin_write16(FIO2_FLAG_C,val)
+#define bfin_read_FIO2_FLAG_S()              bfin_read16(FIO2_FLAG_S)
+#define bfin_write_FIO2_FLAG_S(val)          bfin_write16(FIO2_FLAG_S,val)
+#define bfin_read_FIO2_FLAG_T()              bfin_read16(FIO2_FLAG_T)
+#define bfin_write_FIO2_FLAG_T(val)          bfin_write16(FIO2_FLAG_T,val)
+#define bfin_read_FIO2_MASKA_D()             bfin_read16(FIO2_MASKA_D)
+#define bfin_write_FIO2_MASKA_D(val)         bfin_write16(FIO2_MASKA_D,val)
+#define bfin_read_FIO2_MASKA_C()             bfin_read16(FIO2_MASKA_C)
+#define bfin_write_FIO2_MASKA_C(val)         bfin_write16(FIO2_MASKA_C,val)
+#define bfin_read_FIO2_MASKA_S()             bfin_read16(FIO2_MASKA_S)
+#define bfin_write_FIO2_MASKA_S(val)         bfin_write16(FIO2_MASKA_S,val)
+#define bfin_read_FIO2_MASKA_T()             bfin_read16(FIO2_MASKA_T)
+#define bfin_write_FIO2_MASKA_T(val)         bfin_write16(FIO2_MASKA_T,val)
+#define bfin_read_FIO2_MASKB_D()             bfin_read16(FIO2_MASKB_D)
+#define bfin_write_FIO2_MASKB_D(val)         bfin_write16(FIO2_MASKB_D,val)
+#define bfin_read_FIO2_MASKB_C()             bfin_read16(FIO2_MASKB_C)
+#define bfin_write_FIO2_MASKB_C(val)         bfin_write16(FIO2_MASKB_C,val)
+#define bfin_read_FIO2_MASKB_S()             bfin_read16(FIO2_MASKB_S)
+#define bfin_write_FIO2_MASKB_S(val)         bfin_write16(FIO2_MASKB_S,val)
+#define bfin_read_FIO2_MASKB_T()             bfin_read16(FIO2_MASKB_T)
+#define bfin_write_FIO2_MASKB_T(val)         bfin_write16(FIO2_MASKB_T,val)
+#define bfin_read_FIO2_DIR()                 bfin_read16(FIO2_DIR)
+#define bfin_write_FIO2_DIR(val)             bfin_write16(FIO2_DIR,val)
+#define bfin_read_FIO2_POLAR()               bfin_read16(FIO2_POLAR)
+#define bfin_write_FIO2_POLAR(val)           bfin_write16(FIO2_POLAR,val)
+#define bfin_read_FIO2_EDGE()                bfin_read16(FIO2_EDGE)
+#define bfin_write_FIO2_EDGE(val)            bfin_write16(FIO2_EDGE,val)
+#define bfin_read_FIO2_BOTH()                bfin_read16(FIO2_BOTH)
+#define bfin_write_FIO2_BOTH(val)            bfin_write16(FIO2_BOTH,val)
+#define bfin_read_FIO2_INEN()                bfin_read16(FIO2_INEN)
+#define bfin_write_FIO2_INEN(val)            bfin_write16(FIO2_INEN,val)
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define bfin_read_SPORT0_TCR1()              bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)          bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2()              bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)          bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV()           bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)       bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV()            bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)        bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX()                bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)            bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX()                bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)            bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32()              bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)          bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32()              bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)          bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16()              bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)          bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16()              bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)          bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1()              bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)          bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2()              bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)          bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV()           bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)       bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV()            bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)        bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT()              bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)          bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL()              bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)          bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1()             bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)         bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2()             bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)         bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0()             bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)         bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1()             bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)         bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2()             bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)         bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3()             bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)         bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0()             bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)         bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1()             bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)         bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2()             bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)         bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3()             bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)         bfin_write32(SPORT0_MRCS3,val)
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define bfin_read_SPORT1_TCR1()              bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)          bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2()              bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)          bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV()           bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)       bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV()            bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)        bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX()                bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)            bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX()                bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)            bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32()              bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)          bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32()              bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)          bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16()              bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)          bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16()              bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)          bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1()              bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)          bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2()              bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)          bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV()           bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)       bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV()            bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)        bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT()              bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)          bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL()              bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)          bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1()             bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)         bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2()             bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)         bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0()             bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)         bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1()             bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)         bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2()             bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)         bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3()             bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)         bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0()             bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)         bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1()             bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)         bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2()             bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)         bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3()             bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)         bfin_write32(SPORT1_MRCS3,val)
+/* Asynchronous Memory Controller - External Bus Interface Unit */
+#define bfin_read_EBIU_AMGCTL()              bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)          bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0()             bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)         bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1()             bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)         bfin_write32(EBIU_AMBCTL1,val)
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define bfin_read_EBIU_SDGCTL()              bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)          bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDBCTL()              bfin_read32(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)          bfin_write32(EBIU_SDBCTL,val)
+#define bfin_read_EBIU_SDRRC()               bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)           bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT()              bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)          bfin_write16(EBIU_SDSTAT,val)
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
+#define bfin_read_PPI0_CONTROL()             bfin_read16(PPI0_CONTROL)
+#define bfin_write_PPI0_CONTROL(val)         bfin_write16(PPI0_CONTROL,val)
+#define bfin_read_PPI0_STATUS()              bfin_read16(PPI0_STATUS)
+#define bfin_write_PPI0_STATUS(val)          bfin_write16(PPI0_STATUS,val)
+#define bfin_clear_PPI0_STATUS()             bfin_read_PPI0_STATUS()
+#define bfin_read_PPI0_COUNT()               bfin_read16(PPI0_COUNT)
+#define bfin_write_PPI0_COUNT(val)           bfin_write16(PPI0_COUNT,val)
+#define bfin_read_PPI0_DELAY()               bfin_read16(PPI0_DELAY)
+#define bfin_write_PPI0_DELAY(val)           bfin_write16(PPI0_DELAY,val)
+#define bfin_read_PPI0_FRAME()               bfin_read16(PPI0_FRAME)
+#define bfin_write_PPI0_FRAME(val)           bfin_write16(PPI0_FRAME,val)
+/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
+#define bfin_read_PPI1_CONTROL()             bfin_read16(PPI1_CONTROL)
+#define bfin_write_PPI1_CONTROL(val)         bfin_write16(PPI1_CONTROL,val)
+#define bfin_read_PPI1_STATUS()              bfin_read16(PPI1_STATUS)
+#define bfin_write_PPI1_STATUS(val)          bfin_write16(PPI1_STATUS,val)
+#define bfin_clear_PPI1_STATUS()             bfin_read_PPI1_STATUS()
+#define bfin_read_PPI1_COUNT()               bfin_read16(PPI1_COUNT)
+#define bfin_write_PPI1_COUNT(val)           bfin_write16(PPI1_COUNT,val)
+#define bfin_read_PPI1_DELAY()               bfin_read16(PPI1_DELAY)
+#define bfin_write_PPI1_DELAY(val)           bfin_write16(PPI1_DELAY,val)
+#define bfin_read_PPI1_FRAME()               bfin_read16(PPI1_FRAME)
+#define bfin_write_PPI1_FRAME(val)           bfin_write16(PPI1_FRAME,val)
+/*DMA traffic control registers */
+#define bfin_read_DMA1_TC_PER()              bfin_read16(DMA1_TC_PER)
+#define bfin_write_DMA1_TC_PER(val)          bfin_write16(DMA1_TC_PER,val)
+#define bfin_read_DMA1_TC_CNT()              bfin_read16(DMA1_TC_CNT)
+#define bfin_write_DMA1_TC_CNT(val)          bfin_write16(DMA1_TC_CNT,val)
+#define bfin_read_DMA2_TC_PER()              bfin_read16(DMA2_TC_PER)
+#define bfin_write_DMA2_TC_PER(val)          bfin_write16(DMA2_TC_PER,val)
+#define bfin_read_DMA2_TC_CNT()              bfin_read16(DMA2_TC_CNT)
+#define bfin_write_DMA2_TC_CNT(val)          bfin_write16(DMA2_TC_CNT,val)
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define bfin_read_DMA1_0_CONFIG()            bfin_read16(DMA1_0_CONFIG)
+#define bfin_write_DMA1_0_CONFIG(val)        bfin_write16(DMA1_0_CONFIG,val)
+#define bfin_read_DMA1_0_NEXT_DESC_PTR()     bfin_read32(DMA1_0_NEXT_DESC_PTR)
+#define bfin_write_DMA1_0_NEXT_DESC_PTR(val) bfin_write32(DMA1_0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_0_START_ADDR()        bfin_read32(DMA1_0_START_ADDR)
+#define bfin_write_DMA1_0_START_ADDR(val)    bfin_write32(DMA1_0_START_ADDR,val)
+#define bfin_read_DMA1_0_X_COUNT()           bfin_read16(DMA1_0_X_COUNT)
+#define bfin_write_DMA1_0_X_COUNT(val)       bfin_write16(DMA1_0_X_COUNT,val)
+#define bfin_read_DMA1_0_Y_COUNT()           bfin_read16(DMA1_0_Y_COUNT)
+#define bfin_write_DMA1_0_Y_COUNT(val)       bfin_write16(DMA1_0_Y_COUNT,val)
+#define bfin_read_DMA1_0_X_MODIFY()          bfin_read16(DMA1_0_X_MODIFY)
+#define bfin_write_DMA1_0_X_MODIFY(val)      bfin_write16(DMA1_0_X_MODIFY,val)
+#define bfin_read_DMA1_0_Y_MODIFY()          bfin_read16(DMA1_0_Y_MODIFY)
+#define bfin_write_DMA1_0_Y_MODIFY(val)      bfin_write16(DMA1_0_Y_MODIFY,val)
+#define bfin_read_DMA1_0_CURR_DESC_PTR()     bfin_read32(DMA1_0_CURR_DESC_PTR)
+#define bfin_write_DMA1_0_CURR_DESC_PTR(val) bfin_write32(DMA1_0_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_0_CURR_ADDR()         bfin_read32(DMA1_0_CURR_ADDR)
+#define bfin_write_DMA1_0_CURR_ADDR(val)     bfin_write32(DMA1_0_CURR_ADDR,val)
+#define bfin_read_DMA1_0_CURR_X_COUNT()      bfin_read16(DMA1_0_CURR_X_COUNT)
+#define bfin_write_DMA1_0_CURR_X_COUNT(val)  bfin_write16(DMA1_0_CURR_X_COUNT,val)
+#define bfin_read_DMA1_0_CURR_Y_COUNT()      bfin_read16(DMA1_0_CURR_Y_COUNT)
+#define bfin_write_DMA1_0_CURR_Y_COUNT(val)  bfin_write16(DMA1_0_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_0_IRQ_STATUS()        bfin_read16(DMA1_0_IRQ_STATUS)
+#define bfin_write_DMA1_0_IRQ_STATUS(val)    bfin_write16(DMA1_0_IRQ_STATUS,val)
+#define bfin_read_DMA1_0_PERIPHERAL_MAP()    bfin_read16(DMA1_0_PERIPHERAL_MAP)
+#define bfin_write_DMA1_0_PERIPHERAL_MAP(val) bfin_write16(DMA1_0_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_1_CONFIG()            bfin_read16(DMA1_1_CONFIG)
+#define bfin_write_DMA1_1_CONFIG(val)        bfin_write16(DMA1_1_CONFIG,val)
+#define bfin_read_DMA1_1_NEXT_DESC_PTR()     bfin_read32(DMA1_1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_1_NEXT_DESC_PTR(val) bfin_write32(DMA1_1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_1_START_ADDR()        bfin_read32(DMA1_1_START_ADDR)
+#define bfin_write_DMA1_1_START_ADDR(val)    bfin_write32(DMA1_1_START_ADDR,val)
+#define bfin_read_DMA1_1_X_COUNT()           bfin_read16(DMA1_1_X_COUNT)
+#define bfin_write_DMA1_1_X_COUNT(val)       bfin_write16(DMA1_1_X_COUNT,val)
+#define bfin_read_DMA1_1_Y_COUNT()           bfin_read16(DMA1_1_Y_COUNT)
+#define bfin_write_DMA1_1_Y_COUNT(val)       bfin_write16(DMA1_1_Y_COUNT,val)
+#define bfin_read_DMA1_1_X_MODIFY()          bfin_read16(DMA1_1_X_MODIFY)
+#define bfin_write_DMA1_1_X_MODIFY(val)      bfin_write16(DMA1_1_X_MODIFY,val)
+#define bfin_read_DMA1_1_Y_MODIFY()          bfin_read16(DMA1_1_Y_MODIFY)
+#define bfin_write_DMA1_1_Y_MODIFY(val)      bfin_write16(DMA1_1_Y_MODIFY,val)
+#define bfin_read_DMA1_1_CURR_DESC_PTR()     bfin_read32(DMA1_1_CURR_DESC_PTR)
+#define bfin_write_DMA1_1_CURR_DESC_PTR(val) bfin_write32(DMA1_1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_1_CURR_ADDR()         bfin_read32(DMA1_1_CURR_ADDR)
+#define bfin_write_DMA1_1_CURR_ADDR(val)     bfin_write32(DMA1_1_CURR_ADDR,val)
+#define bfin_read_DMA1_1_CURR_X_COUNT()      bfin_read16(DMA1_1_CURR_X_COUNT)
+#define bfin_write_DMA1_1_CURR_X_COUNT(val)  bfin_write16(DMA1_1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_1_CURR_Y_COUNT()      bfin_read16(DMA1_1_CURR_Y_COUNT)
+#define bfin_write_DMA1_1_CURR_Y_COUNT(val)  bfin_write16(DMA1_1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_1_IRQ_STATUS()        bfin_read16(DMA1_1_IRQ_STATUS)
+#define bfin_write_DMA1_1_IRQ_STATUS(val)    bfin_write16(DMA1_1_IRQ_STATUS,val)
+#define bfin_read_DMA1_1_PERIPHERAL_MAP()    bfin_read16(DMA1_1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_1_PERIPHERAL_MAP(val) bfin_write16(DMA1_1_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_2_CONFIG()            bfin_read16(DMA1_2_CONFIG)
+#define bfin_write_DMA1_2_CONFIG(val)        bfin_write16(DMA1_2_CONFIG,val)
+#define bfin_read_DMA1_2_NEXT_DESC_PTR()     bfin_read32(DMA1_2_NEXT_DESC_PTR)
+#define bfin_write_DMA1_2_NEXT_DESC_PTR(val) bfin_write32(DMA1_2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_2_START_ADDR()        bfin_read32(DMA1_2_START_ADDR)
+#define bfin_write_DMA1_2_START_ADDR(val)    bfin_write32(DMA1_2_START_ADDR,val)
+#define bfin_read_DMA1_2_X_COUNT()           bfin_read16(DMA1_2_X_COUNT)
+#define bfin_write_DMA1_2_X_COUNT(val)       bfin_write16(DMA1_2_X_COUNT,val)
+#define bfin_read_DMA1_2_Y_COUNT()           bfin_read16(DMA1_2_Y_COUNT)
+#define bfin_write_DMA1_2_Y_COUNT(val)       bfin_write16(DMA1_2_Y_COUNT,val)
+#define bfin_read_DMA1_2_X_MODIFY()          bfin_read16(DMA1_2_X_MODIFY)
+#define bfin_write_DMA1_2_X_MODIFY(val)      bfin_write16(DMA1_2_X_MODIFY,val)
+#define bfin_read_DMA1_2_Y_MODIFY()          bfin_read16(DMA1_2_Y_MODIFY)
+#define bfin_write_DMA1_2_Y_MODIFY(val)      bfin_write16(DMA1_2_Y_MODIFY,val)
+#define bfin_read_DMA1_2_CURR_DESC_PTR()     bfin_read32(DMA1_2_CURR_DESC_PTR)
+#define bfin_write_DMA1_2_CURR_DESC_PTR(val) bfin_write32(DMA1_2_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_2_CURR_ADDR()         bfin_read32(DMA1_2_CURR_ADDR)
+#define bfin_write_DMA1_2_CURR_ADDR(val)     bfin_write32(DMA1_2_CURR_ADDR,val)
+#define bfin_read_DMA1_2_CURR_X_COUNT()      bfin_read16(DMA1_2_CURR_X_COUNT)
+#define bfin_write_DMA1_2_CURR_X_COUNT(val)  bfin_write16(DMA1_2_CURR_X_COUNT,val)
+#define bfin_read_DMA1_2_CURR_Y_COUNT()      bfin_read16(DMA1_2_CURR_Y_COUNT)
+#define bfin_write_DMA1_2_CURR_Y_COUNT(val)  bfin_write16(DMA1_2_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_2_IRQ_STATUS()        bfin_read16(DMA1_2_IRQ_STATUS)
+#define bfin_write_DMA1_2_IRQ_STATUS(val)    bfin_write16(DMA1_2_IRQ_STATUS,val)
+#define bfin_read_DMA1_2_PERIPHERAL_MAP()    bfin_read16(DMA1_2_PERIPHERAL_MAP)
+#define bfin_write_DMA1_2_PERIPHERAL_MAP(val) bfin_write16(DMA1_2_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_3_CONFIG()            bfin_read16(DMA1_3_CONFIG)
+#define bfin_write_DMA1_3_CONFIG(val)        bfin_write16(DMA1_3_CONFIG,val)
+#define bfin_read_DMA1_3_NEXT_DESC_PTR()     bfin_read32(DMA1_3_NEXT_DESC_PTR)
+#define bfin_write_DMA1_3_NEXT_DESC_PTR(val) bfin_write32(DMA1_3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_3_START_ADDR()        bfin_read32(DMA1_3_START_ADDR)
+#define bfin_write_DMA1_3_START_ADDR(val)    bfin_write32(DMA1_3_START_ADDR,val)
+#define bfin_read_DMA1_3_X_COUNT()           bfin_read16(DMA1_3_X_COUNT)
+#define bfin_write_DMA1_3_X_COUNT(val)       bfin_write16(DMA1_3_X_COUNT,val)
+#define bfin_read_DMA1_3_Y_COUNT()           bfin_read16(DMA1_3_Y_COUNT)
+#define bfin_write_DMA1_3_Y_COUNT(val)       bfin_write16(DMA1_3_Y_COUNT,val)
+#define bfin_read_DMA1_3_X_MODIFY()          bfin_read16(DMA1_3_X_MODIFY)
+#define bfin_write_DMA1_3_X_MODIFY(val)      bfin_write16(DMA1_3_X_MODIFY,val)
+#define bfin_read_DMA1_3_Y_MODIFY()          bfin_read16(DMA1_3_Y_MODIFY)
+#define bfin_write_DMA1_3_Y_MODIFY(val)      bfin_write16(DMA1_3_Y_MODIFY,val)
+#define bfin_read_DMA1_3_CURR_DESC_PTR()     bfin_read32(DMA1_3_CURR_DESC_PTR)
+#define bfin_write_DMA1_3_CURR_DESC_PTR(val) bfin_write32(DMA1_3_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_3_CURR_ADDR()         bfin_read32(DMA1_3_CURR_ADDR)
+#define bfin_write_DMA1_3_CURR_ADDR(val)     bfin_write32(DMA1_3_CURR_ADDR,val)
+#define bfin_read_DMA1_3_CURR_X_COUNT()      bfin_read16(DMA1_3_CURR_X_COUNT)
+#define bfin_write_DMA1_3_CURR_X_COUNT(val)  bfin_write16(DMA1_3_CURR_X_COUNT,val)
+#define bfin_read_DMA1_3_CURR_Y_COUNT()      bfin_read16(DMA1_3_CURR_Y_COUNT)
+#define bfin_write_DMA1_3_CURR_Y_COUNT(val)  bfin_write16(DMA1_3_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_3_IRQ_STATUS()        bfin_read16(DMA1_3_IRQ_STATUS)
+#define bfin_write_DMA1_3_IRQ_STATUS(val)    bfin_write16(DMA1_3_IRQ_STATUS,val)
+#define bfin_read_DMA1_3_PERIPHERAL_MAP()    bfin_read16(DMA1_3_PERIPHERAL_MAP)
+#define bfin_write_DMA1_3_PERIPHERAL_MAP(val) bfin_write16(DMA1_3_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_4_CONFIG()            bfin_read16(DMA1_4_CONFIG)
+#define bfin_write_DMA1_4_CONFIG(val)        bfin_write16(DMA1_4_CONFIG,val)
+#define bfin_read_DMA1_4_NEXT_DESC_PTR()     bfin_read32(DMA1_4_NEXT_DESC_PTR)
+#define bfin_write_DMA1_4_NEXT_DESC_PTR(val) bfin_write32(DMA1_4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_4_START_ADDR()        bfin_read32(DMA1_4_START_ADDR)
+#define bfin_write_DMA1_4_START_ADDR(val)    bfin_write32(DMA1_4_START_ADDR,val)
+#define bfin_read_DMA1_4_X_COUNT()           bfin_read16(DMA1_4_X_COUNT)
+#define bfin_write_DMA1_4_X_COUNT(val)       bfin_write16(DMA1_4_X_COUNT,val)
+#define bfin_read_DMA1_4_Y_COUNT()           bfin_read16(DMA1_4_Y_COUNT)
+#define bfin_write_DMA1_4_Y_COUNT(val)       bfin_write16(DMA1_4_Y_COUNT,val)
+#define bfin_read_DMA1_4_X_MODIFY()          bfin_read16(DMA1_4_X_MODIFY)
+#define bfin_write_DMA1_4_X_MODIFY(val)      bfin_write16(DMA1_4_X_MODIFY,val)
+#define bfin_read_DMA1_4_Y_MODIFY()          bfin_read16(DMA1_4_Y_MODIFY)
+#define bfin_write_DMA1_4_Y_MODIFY(val)      bfin_write16(DMA1_4_Y_MODIFY,val)
+#define bfin_read_DMA1_4_CURR_DESC_PTR()     bfin_read32(DMA1_4_CURR_DESC_PTR)
+#define bfin_write_DMA1_4_CURR_DESC_PTR(val) bfin_write32(DMA1_4_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_4_CURR_ADDR()         bfin_read32(DMA1_4_CURR_ADDR)
+#define bfin_write_DMA1_4_CURR_ADDR(val)     bfin_write32(DMA1_4_CURR_ADDR,val)
+#define bfin_read_DMA1_4_CURR_X_COUNT()      bfin_read16(DMA1_4_CURR_X_COUNT)
+#define bfin_write_DMA1_4_CURR_X_COUNT(val)  bfin_write16(DMA1_4_CURR_X_COUNT,val)
+#define bfin_read_DMA1_4_CURR_Y_COUNT()      bfin_read16(DMA1_4_CURR_Y_COUNT)
+#define bfin_write_DMA1_4_CURR_Y_COUNT(val)  bfin_write16(DMA1_4_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_4_IRQ_STATUS()        bfin_read16(DMA1_4_IRQ_STATUS)
+#define bfin_write_DMA1_4_IRQ_STATUS(val)    bfin_write16(DMA1_4_IRQ_STATUS,val)
+#define bfin_read_DMA1_4_PERIPHERAL_MAP()    bfin_read16(DMA1_4_PERIPHERAL_MAP)
+#define bfin_write_DMA1_4_PERIPHERAL_MAP(val) bfin_write16(DMA1_4_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_5_CONFIG()            bfin_read16(DMA1_5_CONFIG)
+#define bfin_write_DMA1_5_CONFIG(val)        bfin_write16(DMA1_5_CONFIG,val)
+#define bfin_read_DMA1_5_NEXT_DESC_PTR()     bfin_read32(DMA1_5_NEXT_DESC_PTR)
+#define bfin_write_DMA1_5_NEXT_DESC_PTR(val) bfin_write32(DMA1_5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_5_START_ADDR()        bfin_read32(DMA1_5_START_ADDR)
+#define bfin_write_DMA1_5_START_ADDR(val)    bfin_write32(DMA1_5_START_ADDR,val)
+#define bfin_read_DMA1_5_X_COUNT()           bfin_read16(DMA1_5_X_COUNT)
+#define bfin_write_DMA1_5_X_COUNT(val)       bfin_write16(DMA1_5_X_COUNT,val)
+#define bfin_read_DMA1_5_Y_COUNT()           bfin_read16(DMA1_5_Y_COUNT)
+#define bfin_write_DMA1_5_Y_COUNT(val)       bfin_write16(DMA1_5_Y_COUNT,val)
+#define bfin_read_DMA1_5_X_MODIFY()          bfin_read16(DMA1_5_X_MODIFY)
+#define bfin_write_DMA1_5_X_MODIFY(val)      bfin_write16(DMA1_5_X_MODIFY,val)
+#define bfin_read_DMA1_5_Y_MODIFY()          bfin_read16(DMA1_5_Y_MODIFY)
+#define bfin_write_DMA1_5_Y_MODIFY(val)      bfin_write16(DMA1_5_Y_MODIFY,val)
+#define bfin_read_DMA1_5_CURR_DESC_PTR()     bfin_read32(DMA1_5_CURR_DESC_PTR)
+#define bfin_write_DMA1_5_CURR_DESC_PTR(val) bfin_write32(DMA1_5_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_5_CURR_ADDR()         bfin_read32(DMA1_5_CURR_ADDR)
+#define bfin_write_DMA1_5_CURR_ADDR(val)     bfin_write32(DMA1_5_CURR_ADDR,val)
+#define bfin_read_DMA1_5_CURR_X_COUNT()      bfin_read16(DMA1_5_CURR_X_COUNT)
+#define bfin_write_DMA1_5_CURR_X_COUNT(val)  bfin_write16(DMA1_5_CURR_X_COUNT,val)
+#define bfin_read_DMA1_5_CURR_Y_COUNT()      bfin_read16(DMA1_5_CURR_Y_COUNT)
+#define bfin_write_DMA1_5_CURR_Y_COUNT(val)  bfin_write16(DMA1_5_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_5_IRQ_STATUS()        bfin_read16(DMA1_5_IRQ_STATUS)
+#define bfin_write_DMA1_5_IRQ_STATUS(val)    bfin_write16(DMA1_5_IRQ_STATUS,val)
+#define bfin_read_DMA1_5_PERIPHERAL_MAP()    bfin_read16(DMA1_5_PERIPHERAL_MAP)
+#define bfin_write_DMA1_5_PERIPHERAL_MAP(val) bfin_write16(DMA1_5_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_6_CONFIG()            bfin_read16(DMA1_6_CONFIG)
+#define bfin_write_DMA1_6_CONFIG(val)        bfin_write16(DMA1_6_CONFIG,val)
+#define bfin_read_DMA1_6_NEXT_DESC_PTR()     bfin_read32(DMA1_6_NEXT_DESC_PTR)
+#define bfin_write_DMA1_6_NEXT_DESC_PTR(val) bfin_write32(DMA1_6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_6_START_ADDR()        bfin_read32(DMA1_6_START_ADDR)
+#define bfin_write_DMA1_6_START_ADDR(val)    bfin_write32(DMA1_6_START_ADDR,val)
+#define bfin_read_DMA1_6_X_COUNT()           bfin_read16(DMA1_6_X_COUNT)
+#define bfin_write_DMA1_6_X_COUNT(val)       bfin_write16(DMA1_6_X_COUNT,val)
+#define bfin_read_DMA1_6_Y_COUNT()           bfin_read16(DMA1_6_Y_COUNT)
+#define bfin_write_DMA1_6_Y_COUNT(val)       bfin_write16(DMA1_6_Y_COUNT,val)
+#define bfin_read_DMA1_6_X_MODIFY()          bfin_read16(DMA1_6_X_MODIFY)
+#define bfin_write_DMA1_6_X_MODIFY(val)      bfin_write16(DMA1_6_X_MODIFY,val)
+#define bfin_read_DMA1_6_Y_MODIFY()          bfin_read16(DMA1_6_Y_MODIFY)
+#define bfin_write_DMA1_6_Y_MODIFY(val)      bfin_write16(DMA1_6_Y_MODIFY,val)
+#define bfin_read_DMA1_6_CURR_DESC_PTR()     bfin_read32(DMA1_6_CURR_DESC_PTR)
+#define bfin_write_DMA1_6_CURR_DESC_PTR(val) bfin_write32(DMA1_6_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_6_CURR_ADDR()         bfin_read32(DMA1_6_CURR_ADDR)
+#define bfin_write_DMA1_6_CURR_ADDR(val)     bfin_write32(DMA1_6_CURR_ADDR,val)
+#define bfin_read_DMA1_6_CURR_X_COUNT()      bfin_read16(DMA1_6_CURR_X_COUNT)
+#define bfin_write_DMA1_6_CURR_X_COUNT(val)  bfin_write16(DMA1_6_CURR_X_COUNT,val)
+#define bfin_read_DMA1_6_CURR_Y_COUNT()      bfin_read16(DMA1_6_CURR_Y_COUNT)
+#define bfin_write_DMA1_6_CURR_Y_COUNT(val)  bfin_write16(DMA1_6_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_6_IRQ_STATUS()        bfin_read16(DMA1_6_IRQ_STATUS)
+#define bfin_write_DMA1_6_IRQ_STATUS(val)    bfin_write16(DMA1_6_IRQ_STATUS,val)
+#define bfin_read_DMA1_6_PERIPHERAL_MAP()    bfin_read16(DMA1_6_PERIPHERAL_MAP)
+#define bfin_write_DMA1_6_PERIPHERAL_MAP(val) bfin_write16(DMA1_6_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_7_CONFIG()            bfin_read16(DMA1_7_CONFIG)
+#define bfin_write_DMA1_7_CONFIG(val)        bfin_write16(DMA1_7_CONFIG,val)
+#define bfin_read_DMA1_7_NEXT_DESC_PTR()     bfin_read32(DMA1_7_NEXT_DESC_PTR)
+#define bfin_write_DMA1_7_NEXT_DESC_PTR(val) bfin_write32(DMA1_7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_7_START_ADDR()        bfin_read32(DMA1_7_START_ADDR)
+#define bfin_write_DMA1_7_START_ADDR(val)    bfin_write32(DMA1_7_START_ADDR,val)
+#define bfin_read_DMA1_7_X_COUNT()           bfin_read16(DMA1_7_X_COUNT)
+#define bfin_write_DMA1_7_X_COUNT(val)       bfin_write16(DMA1_7_X_COUNT,val)
+#define bfin_read_DMA1_7_Y_COUNT()           bfin_read16(DMA1_7_Y_COUNT)
+#define bfin_write_DMA1_7_Y_COUNT(val)       bfin_write16(DMA1_7_Y_COUNT,val)
+#define bfin_read_DMA1_7_X_MODIFY()          bfin_read16(DMA1_7_X_MODIFY)
+#define bfin_write_DMA1_7_X_MODIFY(val)      bfin_write16(DMA1_7_X_MODIFY,val)
+#define bfin_read_DMA1_7_Y_MODIFY()          bfin_read16(DMA1_7_Y_MODIFY)
+#define bfin_write_DMA1_7_Y_MODIFY(val)      bfin_write16(DMA1_7_Y_MODIFY,val)
+#define bfin_read_DMA1_7_CURR_DESC_PTR()     bfin_read32(DMA1_7_CURR_DESC_PTR)
+#define bfin_write_DMA1_7_CURR_DESC_PTR(val) bfin_write32(DMA1_7_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_7_CURR_ADDR()         bfin_read32(DMA1_7_CURR_ADDR)
+#define bfin_write_DMA1_7_CURR_ADDR(val)     bfin_write32(DMA1_7_CURR_ADDR,val)
+#define bfin_read_DMA1_7_CURR_X_COUNT()      bfin_read16(DMA1_7_CURR_X_COUNT)
+#define bfin_write_DMA1_7_CURR_X_COUNT(val)  bfin_write16(DMA1_7_CURR_X_COUNT,val)
+#define bfin_read_DMA1_7_CURR_Y_COUNT()      bfin_read16(DMA1_7_CURR_Y_COUNT)
+#define bfin_write_DMA1_7_CURR_Y_COUNT(val)  bfin_write16(DMA1_7_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_7_IRQ_STATUS()        bfin_read16(DMA1_7_IRQ_STATUS)
+#define bfin_write_DMA1_7_IRQ_STATUS(val)    bfin_write16(DMA1_7_IRQ_STATUS,val)
+#define bfin_read_DMA1_7_PERIPHERAL_MAP()    bfin_read16(DMA1_7_PERIPHERAL_MAP)
+#define bfin_write_DMA1_7_PERIPHERAL_MAP(val) bfin_write16(DMA1_7_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_8_CONFIG()            bfin_read16(DMA1_8_CONFIG)
+#define bfin_write_DMA1_8_CONFIG(val)        bfin_write16(DMA1_8_CONFIG,val)
+#define bfin_read_DMA1_8_NEXT_DESC_PTR()     bfin_read32(DMA1_8_NEXT_DESC_PTR)
+#define bfin_write_DMA1_8_NEXT_DESC_PTR(val) bfin_write32(DMA1_8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_8_START_ADDR()        bfin_read32(DMA1_8_START_ADDR)
+#define bfin_write_DMA1_8_START_ADDR(val)    bfin_write32(DMA1_8_START_ADDR,val)
+#define bfin_read_DMA1_8_X_COUNT()           bfin_read16(DMA1_8_X_COUNT)
+#define bfin_write_DMA1_8_X_COUNT(val)       bfin_write16(DMA1_8_X_COUNT,val)
+#define bfin_read_DMA1_8_Y_COUNT()           bfin_read16(DMA1_8_Y_COUNT)
+#define bfin_write_DMA1_8_Y_COUNT(val)       bfin_write16(DMA1_8_Y_COUNT,val)
+#define bfin_read_DMA1_8_X_MODIFY()          bfin_read16(DMA1_8_X_MODIFY)
+#define bfin_write_DMA1_8_X_MODIFY(val)      bfin_write16(DMA1_8_X_MODIFY,val)
+#define bfin_read_DMA1_8_Y_MODIFY()          bfin_read16(DMA1_8_Y_MODIFY)
+#define bfin_write_DMA1_8_Y_MODIFY(val)      bfin_write16(DMA1_8_Y_MODIFY,val)
+#define bfin_read_DMA1_8_CURR_DESC_PTR()     bfin_read32(DMA1_8_CURR_DESC_PTR)
+#define bfin_write_DMA1_8_CURR_DESC_PTR(val) bfin_write32(DMA1_8_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_8_CURR_ADDR()         bfin_read32(DMA1_8_CURR_ADDR)
+#define bfin_write_DMA1_8_CURR_ADDR(val)     bfin_write32(DMA1_8_CURR_ADDR,val)
+#define bfin_read_DMA1_8_CURR_X_COUNT()      bfin_read16(DMA1_8_CURR_X_COUNT)
+#define bfin_write_DMA1_8_CURR_X_COUNT(val)  bfin_write16(DMA1_8_CURR_X_COUNT,val)
+#define bfin_read_DMA1_8_CURR_Y_COUNT()      bfin_read16(DMA1_8_CURR_Y_COUNT)
+#define bfin_write_DMA1_8_CURR_Y_COUNT(val)  bfin_write16(DMA1_8_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_8_IRQ_STATUS()        bfin_read16(DMA1_8_IRQ_STATUS)
+#define bfin_write_DMA1_8_IRQ_STATUS(val)    bfin_write16(DMA1_8_IRQ_STATUS,val)
+#define bfin_read_DMA1_8_PERIPHERAL_MAP()    bfin_read16(DMA1_8_PERIPHERAL_MAP)
+#define bfin_write_DMA1_8_PERIPHERAL_MAP(val) bfin_write16(DMA1_8_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_9_CONFIG()            bfin_read16(DMA1_9_CONFIG)
+#define bfin_write_DMA1_9_CONFIG(val)        bfin_write16(DMA1_9_CONFIG,val)
+#define bfin_read_DMA1_9_NEXT_DESC_PTR()     bfin_read32(DMA1_9_NEXT_DESC_PTR)
+#define bfin_write_DMA1_9_NEXT_DESC_PTR(val) bfin_write32(DMA1_9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_9_START_ADDR()        bfin_read32(DMA1_9_START_ADDR)
+#define bfin_write_DMA1_9_START_ADDR(val)    bfin_write32(DMA1_9_START_ADDR,val)
+#define bfin_read_DMA1_9_X_COUNT()           bfin_read16(DMA1_9_X_COUNT)
+#define bfin_write_DMA1_9_X_COUNT(val)       bfin_write16(DMA1_9_X_COUNT,val)
+#define bfin_read_DMA1_9_Y_COUNT()           bfin_read16(DMA1_9_Y_COUNT)
+#define bfin_write_DMA1_9_Y_COUNT(val)       bfin_write16(DMA1_9_Y_COUNT,val)
+#define bfin_read_DMA1_9_X_MODIFY()          bfin_read16(DMA1_9_X_MODIFY)
+#define bfin_write_DMA1_9_X_MODIFY(val)      bfin_write16(DMA1_9_X_MODIFY,val)
+#define bfin_read_DMA1_9_Y_MODIFY()          bfin_read16(DMA1_9_Y_MODIFY)
+#define bfin_write_DMA1_9_Y_MODIFY(val)      bfin_write16(DMA1_9_Y_MODIFY,val)
+#define bfin_read_DMA1_9_CURR_DESC_PTR()     bfin_read32(DMA1_9_CURR_DESC_PTR)
+#define bfin_write_DMA1_9_CURR_DESC_PTR(val) bfin_write32(DMA1_9_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_9_CURR_ADDR()         bfin_read32(DMA1_9_CURR_ADDR)
+#define bfin_write_DMA1_9_CURR_ADDR(val)     bfin_write32(DMA1_9_CURR_ADDR,val)
+#define bfin_read_DMA1_9_CURR_X_COUNT()      bfin_read16(DMA1_9_CURR_X_COUNT)
+#define bfin_write_DMA1_9_CURR_X_COUNT(val)  bfin_write16(DMA1_9_CURR_X_COUNT,val)
+#define bfin_read_DMA1_9_CURR_Y_COUNT()      bfin_read16(DMA1_9_CURR_Y_COUNT)
+#define bfin_write_DMA1_9_CURR_Y_COUNT(val)  bfin_write16(DMA1_9_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_9_IRQ_STATUS()        bfin_read16(DMA1_9_IRQ_STATUS)
+#define bfin_write_DMA1_9_IRQ_STATUS(val)    bfin_write16(DMA1_9_IRQ_STATUS,val)
+#define bfin_read_DMA1_9_PERIPHERAL_MAP()    bfin_read16(DMA1_9_PERIPHERAL_MAP)
+#define bfin_write_DMA1_9_PERIPHERAL_MAP(val) bfin_write16(DMA1_9_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_10_CONFIG()           bfin_read16(DMA1_10_CONFIG)
+#define bfin_write_DMA1_10_CONFIG(val)       bfin_write16(DMA1_10_CONFIG,val)
+#define bfin_read_DMA1_10_NEXT_DESC_PTR()    bfin_read32(DMA1_10_NEXT_DESC_PTR)
+#define bfin_write_DMA1_10_NEXT_DESC_PTR(val) bfin_write32(DMA1_10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_10_START_ADDR()       bfin_read32(DMA1_10_START_ADDR)
+#define bfin_write_DMA1_10_START_ADDR(val)   bfin_write32(DMA1_10_START_ADDR,val)
+#define bfin_read_DMA1_10_X_COUNT()          bfin_read16(DMA1_10_X_COUNT)
+#define bfin_write_DMA1_10_X_COUNT(val)      bfin_write16(DMA1_10_X_COUNT,val)
+#define bfin_read_DMA1_10_Y_COUNT()          bfin_read16(DMA1_10_Y_COUNT)
+#define bfin_write_DMA1_10_Y_COUNT(val)      bfin_write16(DMA1_10_Y_COUNT,val)
+#define bfin_read_DMA1_10_X_MODIFY()         bfin_read16(DMA1_10_X_MODIFY)
+#define bfin_write_DMA1_10_X_MODIFY(val)     bfin_write16(DMA1_10_X_MODIFY,val)
+#define bfin_read_DMA1_10_Y_MODIFY()         bfin_read16(DMA1_10_Y_MODIFY)
+#define bfin_write_DMA1_10_Y_MODIFY(val)     bfin_write16(DMA1_10_Y_MODIFY,val)
+#define bfin_read_DMA1_10_CURR_DESC_PTR()    bfin_read32(DMA1_10_CURR_DESC_PTR)
+#define bfin_write_DMA1_10_CURR_DESC_PTR(val) bfin_write32(DMA1_10_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_10_CURR_ADDR()        bfin_read32(DMA1_10_CURR_ADDR)
+#define bfin_write_DMA1_10_CURR_ADDR(val)    bfin_write32(DMA1_10_CURR_ADDR,val)
+#define bfin_read_DMA1_10_CURR_X_COUNT()     bfin_read16(DMA1_10_CURR_X_COUNT)
+#define bfin_write_DMA1_10_CURR_X_COUNT(val) bfin_write16(DMA1_10_CURR_X_COUNT,val)
+#define bfin_read_DMA1_10_CURR_Y_COUNT()     bfin_read16(DMA1_10_CURR_Y_COUNT)
+#define bfin_write_DMA1_10_CURR_Y_COUNT(val) bfin_write16(DMA1_10_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_10_IRQ_STATUS()       bfin_read16(DMA1_10_IRQ_STATUS)
+#define bfin_write_DMA1_10_IRQ_STATUS(val)   bfin_write16(DMA1_10_IRQ_STATUS,val)
+#define bfin_read_DMA1_10_PERIPHERAL_MAP()   bfin_read16(DMA1_10_PERIPHERAL_MAP)
+#define bfin_write_DMA1_10_PERIPHERAL_MAP(val) bfin_write16(DMA1_10_PERIPHERAL_MAP,val)
+#define bfin_read_DMA1_11_CONFIG()           bfin_read16(DMA1_11_CONFIG)
+#define bfin_write_DMA1_11_CONFIG(val)       bfin_write16(DMA1_11_CONFIG,val)
+#define bfin_read_DMA1_11_NEXT_DESC_PTR()    bfin_read32(DMA1_11_NEXT_DESC_PTR)
+#define bfin_write_DMA1_11_NEXT_DESC_PTR(val) bfin_write32(DMA1_11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_11_START_ADDR()       bfin_read32(DMA1_11_START_ADDR)
+#define bfin_write_DMA1_11_START_ADDR(val)   bfin_write32(DMA1_11_START_ADDR,val)
+#define bfin_read_DMA1_11_X_COUNT()          bfin_read16(DMA1_11_X_COUNT)
+#define bfin_write_DMA1_11_X_COUNT(val)      bfin_write16(DMA1_11_X_COUNT,val)
+#define bfin_read_DMA1_11_Y_COUNT()          bfin_read16(DMA1_11_Y_COUNT)
+#define bfin_write_DMA1_11_Y_COUNT(val)      bfin_write16(DMA1_11_Y_COUNT,val)
+#define bfin_read_DMA1_11_X_MODIFY()         bfin_read16(DMA1_11_X_MODIFY)
+#define bfin_write_DMA1_11_X_MODIFY(val)     bfin_write16(DMA1_11_X_MODIFY,val)
+#define bfin_read_DMA1_11_Y_MODIFY()         bfin_read16(DMA1_11_Y_MODIFY)
+#define bfin_write_DMA1_11_Y_MODIFY(val)     bfin_write16(DMA1_11_Y_MODIFY,val)
+#define bfin_read_DMA1_11_CURR_DESC_PTR()    bfin_read32(DMA1_11_CURR_DESC_PTR)
+#define bfin_write_DMA1_11_CURR_DESC_PTR(val) bfin_write32(DMA1_11_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_11_CURR_ADDR()        bfin_read32(DMA1_11_CURR_ADDR)
+#define bfin_write_DMA1_11_CURR_ADDR(val)    bfin_write32(DMA1_11_CURR_ADDR,val)
+#define bfin_read_DMA1_11_CURR_X_COUNT()     bfin_read16(DMA1_11_CURR_X_COUNT)
+#define bfin_write_DMA1_11_CURR_X_COUNT(val) bfin_write16(DMA1_11_CURR_X_COUNT,val)
+#define bfin_read_DMA1_11_CURR_Y_COUNT()     bfin_read16(DMA1_11_CURR_Y_COUNT)
+#define bfin_write_DMA1_11_CURR_Y_COUNT(val) bfin_write16(DMA1_11_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_11_IRQ_STATUS()       bfin_read16(DMA1_11_IRQ_STATUS)
+#define bfin_write_DMA1_11_IRQ_STATUS(val)   bfin_write16(DMA1_11_IRQ_STATUS,val)
+#define bfin_read_DMA1_11_PERIPHERAL_MAP()   bfin_read16(DMA1_11_PERIPHERAL_MAP)
+#define bfin_write_DMA1_11_PERIPHERAL_MAP(val) bfin_write16(DMA1_11_PERIPHERAL_MAP,val)
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define bfin_read_MDMA1_D0_CONFIG()          bfin_read16(MDMA1_D0_CONFIG)
+#define bfin_write_MDMA1_D0_CONFIG(val)      bfin_write16(MDMA1_D0_CONFIG,val)
+#define bfin_read_MDMA1_D0_NEXT_DESC_PTR()   bfin_read32(MDMA1_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA1_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA1_D0_START_ADDR()      bfin_read32(MDMA1_D0_START_ADDR)
+#define bfin_write_MDMA1_D0_START_ADDR(val)  bfin_write32(MDMA1_D0_START_ADDR,val)
+#define bfin_read_MDMA1_D0_X_COUNT()         bfin_read16(MDMA1_D0_X_COUNT)
+#define bfin_write_MDMA1_D0_X_COUNT(val)     bfin_write16(MDMA1_D0_X_COUNT,val)
+#define bfin_read_MDMA1_D0_Y_COUNT()         bfin_read16(MDMA1_D0_Y_COUNT)
+#define bfin_write_MDMA1_D0_Y_COUNT(val)     bfin_write16(MDMA1_D0_Y_COUNT,val)
+#define bfin_read_MDMA1_D0_X_MODIFY()        bfin_read16(MDMA1_D0_X_MODIFY)
+#define bfin_write_MDMA1_D0_X_MODIFY(val)    bfin_write16(MDMA1_D0_X_MODIFY,val)
+#define bfin_read_MDMA1_D0_Y_MODIFY()        bfin_read16(MDMA1_D0_Y_MODIFY)
+#define bfin_write_MDMA1_D0_Y_MODIFY(val)    bfin_write16(MDMA1_D0_Y_MODIFY,val)
+#define bfin_read_MDMA1_D0_CURR_DESC_PTR()   bfin_read32(MDMA1_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA1_D0_CURR_DESC_PTR(val) bfin_write32(MDMA1_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA1_D0_CURR_ADDR()       bfin_read32(MDMA1_D0_CURR_ADDR)
+#define bfin_write_MDMA1_D0_CURR_ADDR(val)   bfin_write32(MDMA1_D0_CURR_ADDR,val)
+#define bfin_read_MDMA1_D0_CURR_X_COUNT()    bfin_read16(MDMA1_D0_CURR_X_COUNT)
+#define bfin_write_MDMA1_D0_CURR_X_COUNT(val) bfin_write16(MDMA1_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA1_D0_CURR_Y_COUNT()    bfin_read16(MDMA1_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA1_D0_CURR_Y_COUNT(val) bfin_write16(MDMA1_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA1_D0_IRQ_STATUS()      bfin_read16(MDMA1_D0_IRQ_STATUS)
+#define bfin_write_MDMA1_D0_IRQ_STATUS(val)  bfin_write16(MDMA1_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA1_D0_PERIPHERAL_MAP()  bfin_read16(MDMA1_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA1_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA1_S0_CONFIG()          bfin_read16(MDMA1_S0_CONFIG)
+#define bfin_write_MDMA1_S0_CONFIG(val)      bfin_write16(MDMA1_S0_CONFIG,val)
+#define bfin_read_MDMA1_S0_NEXT_DESC_PTR()   bfin_read32(MDMA1_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA1_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA1_S0_START_ADDR()      bfin_read32(MDMA1_S0_START_ADDR)
+#define bfin_write_MDMA1_S0_START_ADDR(val)  bfin_write32(MDMA1_S0_START_ADDR,val)
+#define bfin_read_MDMA1_S0_X_COUNT()         bfin_read16(MDMA1_S0_X_COUNT)
+#define bfin_write_MDMA1_S0_X_COUNT(val)     bfin_write16(MDMA1_S0_X_COUNT,val)
+#define bfin_read_MDMA1_S0_Y_COUNT()         bfin_read16(MDMA1_S0_Y_COUNT)
+#define bfin_write_MDMA1_S0_Y_COUNT(val)     bfin_write16(MDMA1_S0_Y_COUNT,val)
+#define bfin_read_MDMA1_S0_X_MODIFY()        bfin_read16(MDMA1_S0_X_MODIFY)
+#define bfin_write_MDMA1_S0_X_MODIFY(val)    bfin_write16(MDMA1_S0_X_MODIFY,val)
+#define bfin_read_MDMA1_S0_Y_MODIFY()        bfin_read16(MDMA1_S0_Y_MODIFY)
+#define bfin_write_MDMA1_S0_Y_MODIFY(val)    bfin_write16(MDMA1_S0_Y_MODIFY,val)
+#define bfin_read_MDMA1_S0_CURR_DESC_PTR()   bfin_read32(MDMA1_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA1_S0_CURR_DESC_PTR(val) bfin_write32(MDMA1_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA1_S0_CURR_ADDR()       bfin_read32(MDMA1_S0_CURR_ADDR)
+#define bfin_write_MDMA1_S0_CURR_ADDR(val)   bfin_write32(MDMA1_S0_CURR_ADDR,val)
+#define bfin_read_MDMA1_S0_CURR_X_COUNT()    bfin_read16(MDMA1_S0_CURR_X_COUNT)
+#define bfin_write_MDMA1_S0_CURR_X_COUNT(val) bfin_write16(MDMA1_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA1_S0_CURR_Y_COUNT()    bfin_read16(MDMA1_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA1_S0_CURR_Y_COUNT(val) bfin_write16(MDMA1_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA1_S0_IRQ_STATUS()      bfin_read16(MDMA1_S0_IRQ_STATUS)
+#define bfin_write_MDMA1_S0_IRQ_STATUS(val)  bfin_write16(MDMA1_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA1_S0_PERIPHERAL_MAP()  bfin_read16(MDMA1_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA1_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA1_D1_CONFIG()          bfin_read16(MDMA1_D1_CONFIG)
+#define bfin_write_MDMA1_D1_CONFIG(val)      bfin_write16(MDMA1_D1_CONFIG,val)
+#define bfin_read_MDMA1_D1_NEXT_DESC_PTR()   bfin_read32(MDMA1_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA1_D1_START_ADDR()      bfin_read32(MDMA1_D1_START_ADDR)
+#define bfin_write_MDMA1_D1_START_ADDR(val)  bfin_write32(MDMA1_D1_START_ADDR,val)
+#define bfin_read_MDMA1_D1_X_COUNT()         bfin_read16(MDMA1_D1_X_COUNT)
+#define bfin_write_MDMA1_D1_X_COUNT(val)     bfin_write16(MDMA1_D1_X_COUNT,val)
+#define bfin_read_MDMA1_D1_Y_COUNT()         bfin_read16(MDMA1_D1_Y_COUNT)
+#define bfin_write_MDMA1_D1_Y_COUNT(val)     bfin_write16(MDMA1_D1_Y_COUNT,val)
+#define bfin_read_MDMA1_D1_X_MODIFY()        bfin_read16(MDMA1_D1_X_MODIFY)
+#define bfin_write_MDMA1_D1_X_MODIFY(val)    bfin_write16(MDMA1_D1_X_MODIFY,val)
+#define bfin_read_MDMA1_D1_Y_MODIFY()        bfin_read16(MDMA1_D1_Y_MODIFY)
+#define bfin_write_MDMA1_D1_Y_MODIFY(val)    bfin_write16(MDMA1_D1_Y_MODIFY,val)
+#define bfin_read_MDMA1_D1_CURR_DESC_PTR()   bfin_read32(MDMA1_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA1_D1_CURR_DESC_PTR(val) bfin_write32(MDMA1_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA1_D1_CURR_ADDR()       bfin_read32(MDMA1_D1_CURR_ADDR)
+#define bfin_write_MDMA1_D1_CURR_ADDR(val)   bfin_write32(MDMA1_D1_CURR_ADDR,val)
+#define bfin_read_MDMA1_D1_CURR_X_COUNT()    bfin_read16(MDMA1_D1_CURR_X_COUNT)
+#define bfin_write_MDMA1_D1_CURR_X_COUNT(val) bfin_write16(MDMA1_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA1_D1_CURR_Y_COUNT()    bfin_read16(MDMA1_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA1_D1_CURR_Y_COUNT(val) bfin_write16(MDMA1_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA1_D1_IRQ_STATUS()      bfin_read16(MDMA1_D1_IRQ_STATUS)
+#define bfin_write_MDMA1_D1_IRQ_STATUS(val)  bfin_write16(MDMA1_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA1_D1_PERIPHERAL_MAP()  bfin_read16(MDMA1_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA1_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_D1_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA1_S1_CONFIG()          bfin_read16(MDMA1_S1_CONFIG)
+#define bfin_write_MDMA1_S1_CONFIG(val)      bfin_write16(MDMA1_S1_CONFIG,val)
+#define bfin_read_MDMA1_S1_NEXT_DESC_PTR()   bfin_read32(MDMA1_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA1_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA1_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA1_S1_START_ADDR()      bfin_read32(MDMA1_S1_START_ADDR)
+#define bfin_write_MDMA1_S1_START_ADDR(val)  bfin_write32(MDMA1_S1_START_ADDR,val)
+#define bfin_read_MDMA1_S1_X_COUNT()         bfin_read16(MDMA1_S1_X_COUNT)
+#define bfin_write_MDMA1_S1_X_COUNT(val)     bfin_write16(MDMA1_S1_X_COUNT,val)
+#define bfin_read_MDMA1_S1_Y_COUNT()         bfin_read16(MDMA1_S1_Y_COUNT)
+#define bfin_write_MDMA1_S1_Y_COUNT(val)     bfin_write16(MDMA1_S1_Y_COUNT,val)
+#define bfin_read_MDMA1_S1_X_MODIFY()        bfin_read16(MDMA1_S1_X_MODIFY)
+#define bfin_write_MDMA1_S1_X_MODIFY(val)    bfin_write16(MDMA1_S1_X_MODIFY,val)
+#define bfin_read_MDMA1_S1_Y_MODIFY()        bfin_read16(MDMA1_S1_Y_MODIFY)
+#define bfin_write_MDMA1_S1_Y_MODIFY(val)    bfin_write16(MDMA1_S1_Y_MODIFY,val)
+#define bfin_read_MDMA1_S1_CURR_DESC_PTR()   bfin_read32(MDMA1_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA1_S1_CURR_DESC_PTR(val) bfin_write32(MDMA1_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA1_S1_CURR_ADDR()       bfin_read32(MDMA1_S1_CURR_ADDR)
+#define bfin_write_MDMA1_S1_CURR_ADDR(val)   bfin_write32(MDMA1_S1_CURR_ADDR,val)
+#define bfin_read_MDMA1_S1_CURR_X_COUNT()    bfin_read16(MDMA1_S1_CURR_X_COUNT)
+#define bfin_write_MDMA1_S1_CURR_X_COUNT(val) bfin_write16(MDMA1_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA1_S1_CURR_Y_COUNT()    bfin_read16(MDMA1_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA1_S1_CURR_Y_COUNT(val) bfin_write16(MDMA1_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA1_S1_IRQ_STATUS()      bfin_read16(MDMA1_S1_IRQ_STATUS)
+#define bfin_write_MDMA1_S1_IRQ_STATUS(val)  bfin_write16(MDMA1_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA1_S1_PERIPHERAL_MAP()  bfin_read16(MDMA1_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA1_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA1_S1_PERIPHERAL_MAP,val)
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define bfin_read_DMA2_0_CONFIG()            bfin_read16(DMA2_0_CONFIG)
+#define bfin_write_DMA2_0_CONFIG(val)        bfin_write16(DMA2_0_CONFIG,val)
+#define bfin_read_DMA2_0_NEXT_DESC_PTR()     bfin_read32(DMA2_0_NEXT_DESC_PTR)
+#define bfin_write_DMA2_0_NEXT_DESC_PTR(val) bfin_write32(DMA2_0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_0_START_ADDR()        bfin_read32(DMA2_0_START_ADDR)
+#define bfin_write_DMA2_0_START_ADDR(val)    bfin_write32(DMA2_0_START_ADDR,val)
+#define bfin_read_DMA2_0_X_COUNT()           bfin_read16(DMA2_0_X_COUNT)
+#define bfin_write_DMA2_0_X_COUNT(val)       bfin_write16(DMA2_0_X_COUNT,val)
+#define bfin_read_DMA2_0_Y_COUNT()           bfin_read16(DMA2_0_Y_COUNT)
+#define bfin_write_DMA2_0_Y_COUNT(val)       bfin_write16(DMA2_0_Y_COUNT,val)
+#define bfin_read_DMA2_0_X_MODIFY()          bfin_read16(DMA2_0_X_MODIFY)
+#define bfin_write_DMA2_0_X_MODIFY(val)      bfin_write16(DMA2_0_X_MODIFY,val)
+#define bfin_read_DMA2_0_Y_MODIFY()          bfin_read16(DMA2_0_Y_MODIFY)
+#define bfin_write_DMA2_0_Y_MODIFY(val)      bfin_write16(DMA2_0_Y_MODIFY,val)
+#define bfin_read_DMA2_0_CURR_DESC_PTR()     bfin_read32(DMA2_0_CURR_DESC_PTR)
+#define bfin_write_DMA2_0_CURR_DESC_PTR(val) bfin_write32(DMA2_0_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_0_CURR_ADDR()         bfin_read32(DMA2_0_CURR_ADDR)
+#define bfin_write_DMA2_0_CURR_ADDR(val)     bfin_write32(DMA2_0_CURR_ADDR,val)
+#define bfin_read_DMA2_0_CURR_X_COUNT()      bfin_read16(DMA2_0_CURR_X_COUNT)
+#define bfin_write_DMA2_0_CURR_X_COUNT(val)  bfin_write16(DMA2_0_CURR_X_COUNT,val)
+#define bfin_read_DMA2_0_CURR_Y_COUNT()      bfin_read16(DMA2_0_CURR_Y_COUNT)
+#define bfin_write_DMA2_0_CURR_Y_COUNT(val)  bfin_write16(DMA2_0_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_0_IRQ_STATUS()        bfin_read16(DMA2_0_IRQ_STATUS)
+#define bfin_write_DMA2_0_IRQ_STATUS(val)    bfin_write16(DMA2_0_IRQ_STATUS,val)
+#define bfin_read_DMA2_0_PERIPHERAL_MAP()    bfin_read16(DMA2_0_PERIPHERAL_MAP)
+#define bfin_write_DMA2_0_PERIPHERAL_MAP(val) bfin_write16(DMA2_0_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_1_CONFIG()            bfin_read16(DMA2_1_CONFIG)
+#define bfin_write_DMA2_1_CONFIG(val)        bfin_write16(DMA2_1_CONFIG,val)
+#define bfin_read_DMA2_1_NEXT_DESC_PTR()     bfin_read32(DMA2_1_NEXT_DESC_PTR)
+#define bfin_write_DMA2_1_NEXT_DESC_PTR(val) bfin_write32(DMA2_1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_1_START_ADDR()        bfin_read32(DMA2_1_START_ADDR)
+#define bfin_write_DMA2_1_START_ADDR(val)    bfin_write32(DMA2_1_START_ADDR,val)
+#define bfin_read_DMA2_1_X_COUNT()           bfin_read16(DMA2_1_X_COUNT)
+#define bfin_write_DMA2_1_X_COUNT(val)       bfin_write16(DMA2_1_X_COUNT,val)
+#define bfin_read_DMA2_1_Y_COUNT()           bfin_read16(DMA2_1_Y_COUNT)
+#define bfin_write_DMA2_1_Y_COUNT(val)       bfin_write16(DMA2_1_Y_COUNT,val)
+#define bfin_read_DMA2_1_X_MODIFY()          bfin_read16(DMA2_1_X_MODIFY)
+#define bfin_write_DMA2_1_X_MODIFY(val)      bfin_write16(DMA2_1_X_MODIFY,val)
+#define bfin_read_DMA2_1_Y_MODIFY()          bfin_read16(DMA2_1_Y_MODIFY)
+#define bfin_write_DMA2_1_Y_MODIFY(val)      bfin_write16(DMA2_1_Y_MODIFY,val)
+#define bfin_read_DMA2_1_CURR_DESC_PTR()     bfin_read32(DMA2_1_CURR_DESC_PTR)
+#define bfin_write_DMA2_1_CURR_DESC_PTR(val) bfin_write32(DMA2_1_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_1_CURR_ADDR()         bfin_read32(DMA2_1_CURR_ADDR)
+#define bfin_write_DMA2_1_CURR_ADDR(val)     bfin_write32(DMA2_1_CURR_ADDR,val)
+#define bfin_read_DMA2_1_CURR_X_COUNT()      bfin_read16(DMA2_1_CURR_X_COUNT)
+#define bfin_write_DMA2_1_CURR_X_COUNT(val)  bfin_write16(DMA2_1_CURR_X_COUNT,val)
+#define bfin_read_DMA2_1_CURR_Y_COUNT()      bfin_read16(DMA2_1_CURR_Y_COUNT)
+#define bfin_write_DMA2_1_CURR_Y_COUNT(val)  bfin_write16(DMA2_1_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_1_IRQ_STATUS()        bfin_read16(DMA2_1_IRQ_STATUS)
+#define bfin_write_DMA2_1_IRQ_STATUS(val)    bfin_write16(DMA2_1_IRQ_STATUS,val)
+#define bfin_read_DMA2_1_PERIPHERAL_MAP()    bfin_read16(DMA2_1_PERIPHERAL_MAP)
+#define bfin_write_DMA2_1_PERIPHERAL_MAP(val) bfin_write16(DMA2_1_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_2_CONFIG()            bfin_read16(DMA2_2_CONFIG)
+#define bfin_write_DMA2_2_CONFIG(val)        bfin_write16(DMA2_2_CONFIG,val)
+#define bfin_read_DMA2_2_NEXT_DESC_PTR()     bfin_read32(DMA2_2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_2_NEXT_DESC_PTR(val) bfin_write32(DMA2_2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_2_START_ADDR()        bfin_read32(DMA2_2_START_ADDR)
+#define bfin_write_DMA2_2_START_ADDR(val)    bfin_write32(DMA2_2_START_ADDR,val)
+#define bfin_read_DMA2_2_X_COUNT()           bfin_read16(DMA2_2_X_COUNT)
+#define bfin_write_DMA2_2_X_COUNT(val)       bfin_write16(DMA2_2_X_COUNT,val)
+#define bfin_read_DMA2_2_Y_COUNT()           bfin_read16(DMA2_2_Y_COUNT)
+#define bfin_write_DMA2_2_Y_COUNT(val)       bfin_write16(DMA2_2_Y_COUNT,val)
+#define bfin_read_DMA2_2_X_MODIFY()          bfin_read16(DMA2_2_X_MODIFY)
+#define bfin_write_DMA2_2_X_MODIFY(val)      bfin_write16(DMA2_2_X_MODIFY,val)
+#define bfin_read_DMA2_2_Y_MODIFY()          bfin_read16(DMA2_2_Y_MODIFY)
+#define bfin_write_DMA2_2_Y_MODIFY(val)      bfin_write16(DMA2_2_Y_MODIFY,val)
+#define bfin_read_DMA2_2_CURR_DESC_PTR()     bfin_read32(DMA2_2_CURR_DESC_PTR)
+#define bfin_write_DMA2_2_CURR_DESC_PTR(val) bfin_write32(DMA2_2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_2_CURR_ADDR()         bfin_read32(DMA2_2_CURR_ADDR)
+#define bfin_write_DMA2_2_CURR_ADDR(val)     bfin_write32(DMA2_2_CURR_ADDR,val)
+#define bfin_read_DMA2_2_CURR_X_COUNT()      bfin_read16(DMA2_2_CURR_X_COUNT)
+#define bfin_write_DMA2_2_CURR_X_COUNT(val)  bfin_write16(DMA2_2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_2_CURR_Y_COUNT()      bfin_read16(DMA2_2_CURR_Y_COUNT)
+#define bfin_write_DMA2_2_CURR_Y_COUNT(val)  bfin_write16(DMA2_2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_2_IRQ_STATUS()        bfin_read16(DMA2_2_IRQ_STATUS)
+#define bfin_write_DMA2_2_IRQ_STATUS(val)    bfin_write16(DMA2_2_IRQ_STATUS,val)
+#define bfin_read_DMA2_2_PERIPHERAL_MAP()    bfin_read16(DMA2_2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_2_PERIPHERAL_MAP(val) bfin_write16(DMA2_2_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_3_CONFIG()            bfin_read16(DMA2_3_CONFIG)
+#define bfin_write_DMA2_3_CONFIG(val)        bfin_write16(DMA2_3_CONFIG,val)
+#define bfin_read_DMA2_3_NEXT_DESC_PTR()     bfin_read32(DMA2_3_NEXT_DESC_PTR)
+#define bfin_write_DMA2_3_NEXT_DESC_PTR(val) bfin_write32(DMA2_3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_3_START_ADDR()        bfin_read32(DMA2_3_START_ADDR)
+#define bfin_write_DMA2_3_START_ADDR(val)    bfin_write32(DMA2_3_START_ADDR,val)
+#define bfin_read_DMA2_3_X_COUNT()           bfin_read16(DMA2_3_X_COUNT)
+#define bfin_write_DMA2_3_X_COUNT(val)       bfin_write16(DMA2_3_X_COUNT,val)
+#define bfin_read_DMA2_3_Y_COUNT()           bfin_read16(DMA2_3_Y_COUNT)
+#define bfin_write_DMA2_3_Y_COUNT(val)       bfin_write16(DMA2_3_Y_COUNT,val)
+#define bfin_read_DMA2_3_X_MODIFY()          bfin_read16(DMA2_3_X_MODIFY)
+#define bfin_write_DMA2_3_X_MODIFY(val)      bfin_write16(DMA2_3_X_MODIFY,val)
+#define bfin_read_DMA2_3_Y_MODIFY()          bfin_read16(DMA2_3_Y_MODIFY)
+#define bfin_write_DMA2_3_Y_MODIFY(val)      bfin_write16(DMA2_3_Y_MODIFY,val)
+#define bfin_read_DMA2_3_CURR_DESC_PTR()     bfin_read32(DMA2_3_CURR_DESC_PTR)
+#define bfin_write_DMA2_3_CURR_DESC_PTR(val) bfin_write32(DMA2_3_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_3_CURR_ADDR()         bfin_read32(DMA2_3_CURR_ADDR)
+#define bfin_write_DMA2_3_CURR_ADDR(val)     bfin_write32(DMA2_3_CURR_ADDR,val)
+#define bfin_read_DMA2_3_CURR_X_COUNT()      bfin_read16(DMA2_3_CURR_X_COUNT)
+#define bfin_write_DMA2_3_CURR_X_COUNT(val)  bfin_write16(DMA2_3_CURR_X_COUNT,val)
+#define bfin_read_DMA2_3_CURR_Y_COUNT()      bfin_read16(DMA2_3_CURR_Y_COUNT)
+#define bfin_write_DMA2_3_CURR_Y_COUNT(val)  bfin_write16(DMA2_3_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_3_IRQ_STATUS()        bfin_read16(DMA2_3_IRQ_STATUS)
+#define bfin_write_DMA2_3_IRQ_STATUS(val)    bfin_write16(DMA2_3_IRQ_STATUS,val)
+#define bfin_read_DMA2_3_PERIPHERAL_MAP()    bfin_read16(DMA2_3_PERIPHERAL_MAP)
+#define bfin_write_DMA2_3_PERIPHERAL_MAP(val) bfin_write16(DMA2_3_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_4_CONFIG()            bfin_read16(DMA2_4_CONFIG)
+#define bfin_write_DMA2_4_CONFIG(val)        bfin_write16(DMA2_4_CONFIG,val)
+#define bfin_read_DMA2_4_NEXT_DESC_PTR()     bfin_read32(DMA2_4_NEXT_DESC_PTR)
+#define bfin_write_DMA2_4_NEXT_DESC_PTR(val) bfin_write32(DMA2_4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_4_START_ADDR()        bfin_read32(DMA2_4_START_ADDR)
+#define bfin_write_DMA2_4_START_ADDR(val)    bfin_write32(DMA2_4_START_ADDR,val)
+#define bfin_read_DMA2_4_X_COUNT()           bfin_read16(DMA2_4_X_COUNT)
+#define bfin_write_DMA2_4_X_COUNT(val)       bfin_write16(DMA2_4_X_COUNT,val)
+#define bfin_read_DMA2_4_Y_COUNT()           bfin_read16(DMA2_4_Y_COUNT)
+#define bfin_write_DMA2_4_Y_COUNT(val)       bfin_write16(DMA2_4_Y_COUNT,val)
+#define bfin_read_DMA2_4_X_MODIFY()          bfin_read16(DMA2_4_X_MODIFY)
+#define bfin_write_DMA2_4_X_MODIFY(val)      bfin_write16(DMA2_4_X_MODIFY,val)
+#define bfin_read_DMA2_4_Y_MODIFY()          bfin_read16(DMA2_4_Y_MODIFY)
+#define bfin_write_DMA2_4_Y_MODIFY(val)      bfin_write16(DMA2_4_Y_MODIFY,val)
+#define bfin_read_DMA2_4_CURR_DESC_PTR()     bfin_read32(DMA2_4_CURR_DESC_PTR)
+#define bfin_write_DMA2_4_CURR_DESC_PTR(val) bfin_write32(DMA2_4_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_4_CURR_ADDR()         bfin_read32(DMA2_4_CURR_ADDR)
+#define bfin_write_DMA2_4_CURR_ADDR(val)     bfin_write32(DMA2_4_CURR_ADDR,val)
+#define bfin_read_DMA2_4_CURR_X_COUNT()      bfin_read16(DMA2_4_CURR_X_COUNT)
+#define bfin_write_DMA2_4_CURR_X_COUNT(val)  bfin_write16(DMA2_4_CURR_X_COUNT,val)
+#define bfin_read_DMA2_4_CURR_Y_COUNT()      bfin_read16(DMA2_4_CURR_Y_COUNT)
+#define bfin_write_DMA2_4_CURR_Y_COUNT(val)  bfin_write16(DMA2_4_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_4_IRQ_STATUS()        bfin_read16(DMA2_4_IRQ_STATUS)
+#define bfin_write_DMA2_4_IRQ_STATUS(val)    bfin_write16(DMA2_4_IRQ_STATUS,val)
+#define bfin_read_DMA2_4_PERIPHERAL_MAP()    bfin_read16(DMA2_4_PERIPHERAL_MAP)
+#define bfin_write_DMA2_4_PERIPHERAL_MAP(val) bfin_write16(DMA2_4_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_5_CONFIG()            bfin_read16(DMA2_5_CONFIG)
+#define bfin_write_DMA2_5_CONFIG(val)        bfin_write16(DMA2_5_CONFIG,val)
+#define bfin_read_DMA2_5_NEXT_DESC_PTR()     bfin_read32(DMA2_5_NEXT_DESC_PTR)
+#define bfin_write_DMA2_5_NEXT_DESC_PTR(val) bfin_write32(DMA2_5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_5_START_ADDR()        bfin_read32(DMA2_5_START_ADDR)
+#define bfin_write_DMA2_5_START_ADDR(val)    bfin_write32(DMA2_5_START_ADDR,val)
+#define bfin_read_DMA2_5_X_COUNT()           bfin_read16(DMA2_5_X_COUNT)
+#define bfin_write_DMA2_5_X_COUNT(val)       bfin_write16(DMA2_5_X_COUNT,val)
+#define bfin_read_DMA2_5_Y_COUNT()           bfin_read16(DMA2_5_Y_COUNT)
+#define bfin_write_DMA2_5_Y_COUNT(val)       bfin_write16(DMA2_5_Y_COUNT,val)
+#define bfin_read_DMA2_5_X_MODIFY()          bfin_read16(DMA2_5_X_MODIFY)
+#define bfin_write_DMA2_5_X_MODIFY(val)      bfin_write16(DMA2_5_X_MODIFY,val)
+#define bfin_read_DMA2_5_Y_MODIFY()          bfin_read16(DMA2_5_Y_MODIFY)
+#define bfin_write_DMA2_5_Y_MODIFY(val)      bfin_write16(DMA2_5_Y_MODIFY,val)
+#define bfin_read_DMA2_5_CURR_DESC_PTR()     bfin_read32(DMA2_5_CURR_DESC_PTR)
+#define bfin_write_DMA2_5_CURR_DESC_PTR(val) bfin_write32(DMA2_5_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_5_CURR_ADDR()         bfin_read32(DMA2_5_CURR_ADDR)
+#define bfin_write_DMA2_5_CURR_ADDR(val)     bfin_write32(DMA2_5_CURR_ADDR,val)
+#define bfin_read_DMA2_5_CURR_X_COUNT()      bfin_read16(DMA2_5_CURR_X_COUNT)
+#define bfin_write_DMA2_5_CURR_X_COUNT(val)  bfin_write16(DMA2_5_CURR_X_COUNT,val)
+#define bfin_read_DMA2_5_CURR_Y_COUNT()      bfin_read16(DMA2_5_CURR_Y_COUNT)
+#define bfin_write_DMA2_5_CURR_Y_COUNT(val)  bfin_write16(DMA2_5_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_5_IRQ_STATUS()        bfin_read16(DMA2_5_IRQ_STATUS)
+#define bfin_write_DMA2_5_IRQ_STATUS(val)    bfin_write16(DMA2_5_IRQ_STATUS,val)
+#define bfin_read_DMA2_5_PERIPHERAL_MAP()    bfin_read16(DMA2_5_PERIPHERAL_MAP)
+#define bfin_write_DMA2_5_PERIPHERAL_MAP(val) bfin_write16(DMA2_5_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_6_CONFIG()            bfin_read16(DMA2_6_CONFIG)
+#define bfin_write_DMA2_6_CONFIG(val)        bfin_write16(DMA2_6_CONFIG,val)
+#define bfin_read_DMA2_6_NEXT_DESC_PTR()     bfin_read32(DMA2_6_NEXT_DESC_PTR)
+#define bfin_write_DMA2_6_NEXT_DESC_PTR(val) bfin_write32(DMA2_6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_6_START_ADDR()        bfin_read32(DMA2_6_START_ADDR)
+#define bfin_write_DMA2_6_START_ADDR(val)    bfin_write32(DMA2_6_START_ADDR,val)
+#define bfin_read_DMA2_6_X_COUNT()           bfin_read16(DMA2_6_X_COUNT)
+#define bfin_write_DMA2_6_X_COUNT(val)       bfin_write16(DMA2_6_X_COUNT,val)
+#define bfin_read_DMA2_6_Y_COUNT()           bfin_read16(DMA2_6_Y_COUNT)
+#define bfin_write_DMA2_6_Y_COUNT(val)       bfin_write16(DMA2_6_Y_COUNT,val)
+#define bfin_read_DMA2_6_X_MODIFY()          bfin_read16(DMA2_6_X_MODIFY)
+#define bfin_write_DMA2_6_X_MODIFY(val)      bfin_write16(DMA2_6_X_MODIFY,val)
+#define bfin_read_DMA2_6_Y_MODIFY()          bfin_read16(DMA2_6_Y_MODIFY)
+#define bfin_write_DMA2_6_Y_MODIFY(val)      bfin_write16(DMA2_6_Y_MODIFY,val)
+#define bfin_read_DMA2_6_CURR_DESC_PTR()     bfin_read32(DMA2_6_CURR_DESC_PTR)
+#define bfin_write_DMA2_6_CURR_DESC_PTR(val) bfin_write32(DMA2_6_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_6_CURR_ADDR()         bfin_read32(DMA2_6_CURR_ADDR)
+#define bfin_write_DMA2_6_CURR_ADDR(val)     bfin_write32(DMA2_6_CURR_ADDR,val)
+#define bfin_read_DMA2_6_CURR_X_COUNT()      bfin_read16(DMA2_6_CURR_X_COUNT)
+#define bfin_write_DMA2_6_CURR_X_COUNT(val)  bfin_write16(DMA2_6_CURR_X_COUNT,val)
+#define bfin_read_DMA2_6_CURR_Y_COUNT()      bfin_read16(DMA2_6_CURR_Y_COUNT)
+#define bfin_write_DMA2_6_CURR_Y_COUNT(val)  bfin_write16(DMA2_6_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_6_IRQ_STATUS()        bfin_read16(DMA2_6_IRQ_STATUS)
+#define bfin_write_DMA2_6_IRQ_STATUS(val)    bfin_write16(DMA2_6_IRQ_STATUS,val)
+#define bfin_read_DMA2_6_PERIPHERAL_MAP()    bfin_read16(DMA2_6_PERIPHERAL_MAP)
+#define bfin_write_DMA2_6_PERIPHERAL_MAP(val) bfin_write16(DMA2_6_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_7_CONFIG()            bfin_read16(DMA2_7_CONFIG)
+#define bfin_write_DMA2_7_CONFIG(val)        bfin_write16(DMA2_7_CONFIG,val)
+#define bfin_read_DMA2_7_NEXT_DESC_PTR()     bfin_read32(DMA2_7_NEXT_DESC_PTR)
+#define bfin_write_DMA2_7_NEXT_DESC_PTR(val) bfin_write32(DMA2_7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_7_START_ADDR()        bfin_read32(DMA2_7_START_ADDR)
+#define bfin_write_DMA2_7_START_ADDR(val)    bfin_write32(DMA2_7_START_ADDR,val)
+#define bfin_read_DMA2_7_X_COUNT()           bfin_read16(DMA2_7_X_COUNT)
+#define bfin_write_DMA2_7_X_COUNT(val)       bfin_write16(DMA2_7_X_COUNT,val)
+#define bfin_read_DMA2_7_Y_COUNT()           bfin_read16(DMA2_7_Y_COUNT)
+#define bfin_write_DMA2_7_Y_COUNT(val)       bfin_write16(DMA2_7_Y_COUNT,val)
+#define bfin_read_DMA2_7_X_MODIFY()          bfin_read16(DMA2_7_X_MODIFY)
+#define bfin_write_DMA2_7_X_MODIFY(val)      bfin_write16(DMA2_7_X_MODIFY,val)
+#define bfin_read_DMA2_7_Y_MODIFY()          bfin_read16(DMA2_7_Y_MODIFY)
+#define bfin_write_DMA2_7_Y_MODIFY(val)      bfin_write16(DMA2_7_Y_MODIFY,val)
+#define bfin_read_DMA2_7_CURR_DESC_PTR()     bfin_read32(DMA2_7_CURR_DESC_PTR)
+#define bfin_write_DMA2_7_CURR_DESC_PTR(val) bfin_write32(DMA2_7_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_7_CURR_ADDR()         bfin_read32(DMA2_7_CURR_ADDR)
+#define bfin_write_DMA2_7_CURR_ADDR(val)     bfin_write32(DMA2_7_CURR_ADDR,val)
+#define bfin_read_DMA2_7_CURR_X_COUNT()      bfin_read16(DMA2_7_CURR_X_COUNT)
+#define bfin_write_DMA2_7_CURR_X_COUNT(val)  bfin_write16(DMA2_7_CURR_X_COUNT,val)
+#define bfin_read_DMA2_7_CURR_Y_COUNT()      bfin_read16(DMA2_7_CURR_Y_COUNT)
+#define bfin_write_DMA2_7_CURR_Y_COUNT(val)  bfin_write16(DMA2_7_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_7_IRQ_STATUS()        bfin_read16(DMA2_7_IRQ_STATUS)
+#define bfin_write_DMA2_7_IRQ_STATUS(val)    bfin_write16(DMA2_7_IRQ_STATUS,val)
+#define bfin_read_DMA2_7_PERIPHERAL_MAP()    bfin_read16(DMA2_7_PERIPHERAL_MAP)
+#define bfin_write_DMA2_7_PERIPHERAL_MAP(val) bfin_write16(DMA2_7_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_8_CONFIG()            bfin_read16(DMA2_8_CONFIG)
+#define bfin_write_DMA2_8_CONFIG(val)        bfin_write16(DMA2_8_CONFIG,val)
+#define bfin_read_DMA2_8_NEXT_DESC_PTR()     bfin_read32(DMA2_8_NEXT_DESC_PTR)
+#define bfin_write_DMA2_8_NEXT_DESC_PTR(val) bfin_write32(DMA2_8_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_8_START_ADDR()        bfin_read32(DMA2_8_START_ADDR)
+#define bfin_write_DMA2_8_START_ADDR(val)    bfin_write32(DMA2_8_START_ADDR,val)
+#define bfin_read_DMA2_8_X_COUNT()           bfin_read16(DMA2_8_X_COUNT)
+#define bfin_write_DMA2_8_X_COUNT(val)       bfin_write16(DMA2_8_X_COUNT,val)
+#define bfin_read_DMA2_8_Y_COUNT()           bfin_read16(DMA2_8_Y_COUNT)
+#define bfin_write_DMA2_8_Y_COUNT(val)       bfin_write16(DMA2_8_Y_COUNT,val)
+#define bfin_read_DMA2_8_X_MODIFY()          bfin_read16(DMA2_8_X_MODIFY)
+#define bfin_write_DMA2_8_X_MODIFY(val)      bfin_write16(DMA2_8_X_MODIFY,val)
+#define bfin_read_DMA2_8_Y_MODIFY()          bfin_read16(DMA2_8_Y_MODIFY)
+#define bfin_write_DMA2_8_Y_MODIFY(val)      bfin_write16(DMA2_8_Y_MODIFY,val)
+#define bfin_read_DMA2_8_CURR_DESC_PTR()     bfin_read32(DMA2_8_CURR_DESC_PTR)
+#define bfin_write_DMA2_8_CURR_DESC_PTR(val) bfin_write32(DMA2_8_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_8_CURR_ADDR()         bfin_read32(DMA2_8_CURR_ADDR)
+#define bfin_write_DMA2_8_CURR_ADDR(val)     bfin_write32(DMA2_8_CURR_ADDR,val)
+#define bfin_read_DMA2_8_CURR_X_COUNT()      bfin_read16(DMA2_8_CURR_X_COUNT)
+#define bfin_write_DMA2_8_CURR_X_COUNT(val)  bfin_write16(DMA2_8_CURR_X_COUNT,val)
+#define bfin_read_DMA2_8_CURR_Y_COUNT()      bfin_read16(DMA2_8_CURR_Y_COUNT)
+#define bfin_write_DMA2_8_CURR_Y_COUNT(val)  bfin_write16(DMA2_8_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_8_IRQ_STATUS()        bfin_read16(DMA2_8_IRQ_STATUS)
+#define bfin_write_DMA2_8_IRQ_STATUS(val)    bfin_write16(DMA2_8_IRQ_STATUS,val)
+#define bfin_read_DMA2_8_PERIPHERAL_MAP()    bfin_read16(DMA2_8_PERIPHERAL_MAP)
+#define bfin_write_DMA2_8_PERIPHERAL_MAP(val) bfin_write16(DMA2_8_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_9_CONFIG()            bfin_read16(DMA2_9_CONFIG)
+#define bfin_write_DMA2_9_CONFIG(val)        bfin_write16(DMA2_9_CONFIG,val)
+#define bfin_read_DMA2_9_NEXT_DESC_PTR()     bfin_read32(DMA2_9_NEXT_DESC_PTR)
+#define bfin_write_DMA2_9_NEXT_DESC_PTR(val) bfin_write32(DMA2_9_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_9_START_ADDR()        bfin_read32(DMA2_9_START_ADDR)
+#define bfin_write_DMA2_9_START_ADDR(val)    bfin_write32(DMA2_9_START_ADDR,val)
+#define bfin_read_DMA2_9_X_COUNT()           bfin_read16(DMA2_9_X_COUNT)
+#define bfin_write_DMA2_9_X_COUNT(val)       bfin_write16(DMA2_9_X_COUNT,val)
+#define bfin_read_DMA2_9_Y_COUNT()           bfin_read16(DMA2_9_Y_COUNT)
+#define bfin_write_DMA2_9_Y_COUNT(val)       bfin_write16(DMA2_9_Y_COUNT,val)
+#define bfin_read_DMA2_9_X_MODIFY()          bfin_read16(DMA2_9_X_MODIFY)
+#define bfin_write_DMA2_9_X_MODIFY(val)      bfin_write16(DMA2_9_X_MODIFY,val)
+#define bfin_read_DMA2_9_Y_MODIFY()          bfin_read16(DMA2_9_Y_MODIFY)
+#define bfin_write_DMA2_9_Y_MODIFY(val)      bfin_write16(DMA2_9_Y_MODIFY,val)
+#define bfin_read_DMA2_9_CURR_DESC_PTR()     bfin_read32(DMA2_9_CURR_DESC_PTR)
+#define bfin_write_DMA2_9_CURR_DESC_PTR(val) bfin_write32(DMA2_9_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_9_CURR_ADDR()         bfin_read32(DMA2_9_CURR_ADDR)
+#define bfin_write_DMA2_9_CURR_ADDR(val)     bfin_write32(DMA2_9_CURR_ADDR,val)
+#define bfin_read_DMA2_9_CURR_X_COUNT()      bfin_read16(DMA2_9_CURR_X_COUNT)
+#define bfin_write_DMA2_9_CURR_X_COUNT(val)  bfin_write16(DMA2_9_CURR_X_COUNT,val)
+#define bfin_read_DMA2_9_CURR_Y_COUNT()      bfin_read16(DMA2_9_CURR_Y_COUNT)
+#define bfin_write_DMA2_9_CURR_Y_COUNT(val)  bfin_write16(DMA2_9_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_9_IRQ_STATUS()        bfin_read16(DMA2_9_IRQ_STATUS)
+#define bfin_write_DMA2_9_IRQ_STATUS(val)    bfin_write16(DMA2_9_IRQ_STATUS,val)
+#define bfin_read_DMA2_9_PERIPHERAL_MAP()    bfin_read16(DMA2_9_PERIPHERAL_MAP)
+#define bfin_write_DMA2_9_PERIPHERAL_MAP(val) bfin_write16(DMA2_9_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_10_CONFIG()           bfin_read16(DMA2_10_CONFIG)
+#define bfin_write_DMA2_10_CONFIG(val)       bfin_write16(DMA2_10_CONFIG,val)
+#define bfin_read_DMA2_10_NEXT_DESC_PTR()    bfin_read32(DMA2_10_NEXT_DESC_PTR)
+#define bfin_write_DMA2_10_NEXT_DESC_PTR(val) bfin_write32(DMA2_10_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_10_START_ADDR()       bfin_read32(DMA2_10_START_ADDR)
+#define bfin_write_DMA2_10_START_ADDR(val)   bfin_write32(DMA2_10_START_ADDR,val)
+#define bfin_read_DMA2_10_X_COUNT()          bfin_read16(DMA2_10_X_COUNT)
+#define bfin_write_DMA2_10_X_COUNT(val)      bfin_write16(DMA2_10_X_COUNT,val)
+#define bfin_read_DMA2_10_Y_COUNT()          bfin_read16(DMA2_10_Y_COUNT)
+#define bfin_write_DMA2_10_Y_COUNT(val)      bfin_write16(DMA2_10_Y_COUNT,val)
+#define bfin_read_DMA2_10_X_MODIFY()         bfin_read16(DMA2_10_X_MODIFY)
+#define bfin_write_DMA2_10_X_MODIFY(val)     bfin_write16(DMA2_10_X_MODIFY,val)
+#define bfin_read_DMA2_10_Y_MODIFY()         bfin_read16(DMA2_10_Y_MODIFY)
+#define bfin_write_DMA2_10_Y_MODIFY(val)     bfin_write16(DMA2_10_Y_MODIFY,val)
+#define bfin_read_DMA2_10_CURR_DESC_PTR()    bfin_read32(DMA2_10_CURR_DESC_PTR)
+#define bfin_write_DMA2_10_CURR_DESC_PTR(val) bfin_write32(DMA2_10_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_10_CURR_ADDR()        bfin_read32(DMA2_10_CURR_ADDR)
+#define bfin_write_DMA2_10_CURR_ADDR(val)    bfin_write32(DMA2_10_CURR_ADDR,val)
+#define bfin_read_DMA2_10_CURR_X_COUNT()     bfin_read16(DMA2_10_CURR_X_COUNT)
+#define bfin_write_DMA2_10_CURR_X_COUNT(val) bfin_write16(DMA2_10_CURR_X_COUNT,val)
+#define bfin_read_DMA2_10_CURR_Y_COUNT()     bfin_read16(DMA2_10_CURR_Y_COUNT)
+#define bfin_write_DMA2_10_CURR_Y_COUNT(val) bfin_write16(DMA2_10_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_10_IRQ_STATUS()       bfin_read16(DMA2_10_IRQ_STATUS)
+#define bfin_write_DMA2_10_IRQ_STATUS(val)   bfin_write16(DMA2_10_IRQ_STATUS,val)
+#define bfin_read_DMA2_10_PERIPHERAL_MAP()   bfin_read16(DMA2_10_PERIPHERAL_MAP)
+#define bfin_write_DMA2_10_PERIPHERAL_MAP(val) bfin_write16(DMA2_10_PERIPHERAL_MAP,val)
+#define bfin_read_DMA2_11_CONFIG()           bfin_read16(DMA2_11_CONFIG)
+#define bfin_write_DMA2_11_CONFIG(val)       bfin_write16(DMA2_11_CONFIG,val)
+#define bfin_read_DMA2_11_NEXT_DESC_PTR()    bfin_read32(DMA2_11_NEXT_DESC_PTR)
+#define bfin_write_DMA2_11_NEXT_DESC_PTR(val) bfin_write32(DMA2_11_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_11_START_ADDR()       bfin_read32(DMA2_11_START_ADDR)
+#define bfin_write_DMA2_11_START_ADDR(val)   bfin_write32(DMA2_11_START_ADDR,val)
+#define bfin_read_DMA2_11_X_COUNT()          bfin_read16(DMA2_11_X_COUNT)
+#define bfin_write_DMA2_11_X_COUNT(val)      bfin_write16(DMA2_11_X_COUNT,val)
+#define bfin_read_DMA2_11_Y_COUNT()          bfin_read16(DMA2_11_Y_COUNT)
+#define bfin_write_DMA2_11_Y_COUNT(val)      bfin_write16(DMA2_11_Y_COUNT,val)
+#define bfin_read_DMA2_11_X_MODIFY()         bfin_read16(DMA2_11_X_MODIFY)
+#define bfin_write_DMA2_11_X_MODIFY(val)     bfin_write16(DMA2_11_X_MODIFY,val)
+#define bfin_read_DMA2_11_Y_MODIFY()         bfin_read16(DMA2_11_Y_MODIFY)
+#define bfin_write_DMA2_11_Y_MODIFY(val)     bfin_write16(DMA2_11_Y_MODIFY,val)
+#define bfin_read_DMA2_11_CURR_DESC_PTR()    bfin_read32(DMA2_11_CURR_DESC_PTR)
+#define bfin_write_DMA2_11_CURR_DESC_PTR(val) bfin_write32(DMA2_11_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_11_CURR_ADDR()        bfin_read32(DMA2_11_CURR_ADDR)
+#define bfin_write_DMA2_11_CURR_ADDR(val)    bfin_write32(DMA2_11_CURR_ADDR,val)
+#define bfin_read_DMA2_11_CURR_X_COUNT()     bfin_read16(DMA2_11_CURR_X_COUNT)
+#define bfin_write_DMA2_11_CURR_X_COUNT(val) bfin_write16(DMA2_11_CURR_X_COUNT,val)
+#define bfin_read_DMA2_11_CURR_Y_COUNT()     bfin_read16(DMA2_11_CURR_Y_COUNT)
+#define bfin_write_DMA2_11_CURR_Y_COUNT(val) bfin_write16(DMA2_11_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_11_IRQ_STATUS()       bfin_read16(DMA2_11_IRQ_STATUS)
+#define bfin_write_DMA2_11_IRQ_STATUS(val)   bfin_write16(DMA2_11_IRQ_STATUS,val)
+#define bfin_read_DMA2_11_PERIPHERAL_MAP()   bfin_read16(DMA2_11_PERIPHERAL_MAP)
+#define bfin_write_DMA2_11_PERIPHERAL_MAP(val) bfin_write16(DMA2_11_PERIPHERAL_MAP,val)
+/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
+#define bfin_read_MDMA2_D0_CONFIG()          bfin_read16(MDMA2_D0_CONFIG)
+#define bfin_write_MDMA2_D0_CONFIG(val)      bfin_write16(MDMA2_D0_CONFIG,val)
+#define bfin_read_MDMA2_D0_NEXT_DESC_PTR()   bfin_read32(MDMA2_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA2_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA2_D0_START_ADDR()      bfin_read32(MDMA2_D0_START_ADDR)
+#define bfin_write_MDMA2_D0_START_ADDR(val)  bfin_write32(MDMA2_D0_START_ADDR,val)
+#define bfin_read_MDMA2_D0_X_COUNT()         bfin_read16(MDMA2_D0_X_COUNT)
+#define bfin_write_MDMA2_D0_X_COUNT(val)     bfin_write16(MDMA2_D0_X_COUNT,val)
+#define bfin_read_MDMA2_D0_Y_COUNT()         bfin_read16(MDMA2_D0_Y_COUNT)
+#define bfin_write_MDMA2_D0_Y_COUNT(val)     bfin_write16(MDMA2_D0_Y_COUNT,val)
+#define bfin_read_MDMA2_D0_X_MODIFY()        bfin_read16(MDMA2_D0_X_MODIFY)
+#define bfin_write_MDMA2_D0_X_MODIFY(val)    bfin_write16(MDMA2_D0_X_MODIFY,val)
+#define bfin_read_MDMA2_D0_Y_MODIFY()        bfin_read16(MDMA2_D0_Y_MODIFY)
+#define bfin_write_MDMA2_D0_Y_MODIFY(val)    bfin_write16(MDMA2_D0_Y_MODIFY,val)
+#define bfin_read_MDMA2_D0_CURR_DESC_PTR()   bfin_read32(MDMA2_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA2_D0_CURR_DESC_PTR(val) bfin_write32(MDMA2_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA2_D0_CURR_ADDR()       bfin_read32(MDMA2_D0_CURR_ADDR)
+#define bfin_write_MDMA2_D0_CURR_ADDR(val)   bfin_write32(MDMA2_D0_CURR_ADDR,val)
+#define bfin_read_MDMA2_D0_CURR_X_COUNT()    bfin_read16(MDMA2_D0_CURR_X_COUNT)
+#define bfin_write_MDMA2_D0_CURR_X_COUNT(val) bfin_write16(MDMA2_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA2_D0_CURR_Y_COUNT()    bfin_read16(MDMA2_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA2_D0_CURR_Y_COUNT(val) bfin_write16(MDMA2_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA2_D0_IRQ_STATUS()      bfin_read16(MDMA2_D0_IRQ_STATUS)
+#define bfin_write_MDMA2_D0_IRQ_STATUS(val)  bfin_write16(MDMA2_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA2_D0_PERIPHERAL_MAP()  bfin_read16(MDMA2_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA2_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA2_D0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA2_S0_CONFIG()          bfin_read16(MDMA2_S0_CONFIG)
+#define bfin_write_MDMA2_S0_CONFIG(val)      bfin_write16(MDMA2_S0_CONFIG,val)
+#define bfin_read_MDMA2_S0_NEXT_DESC_PTR()   bfin_read32(MDMA2_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA2_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA2_S0_START_ADDR()      bfin_read32(MDMA2_S0_START_ADDR)
+#define bfin_write_MDMA2_S0_START_ADDR(val)  bfin_write32(MDMA2_S0_START_ADDR,val)
+#define bfin_read_MDMA2_S0_X_COUNT()         bfin_read16(MDMA2_S0_X_COUNT)
+#define bfin_write_MDMA2_S0_X_COUNT(val)     bfin_write16(MDMA2_S0_X_COUNT,val)
+#define bfin_read_MDMA2_S0_Y_COUNT()         bfin_read16(MDMA2_S0_Y_COUNT)
+#define bfin_write_MDMA2_S0_Y_COUNT(val)     bfin_write16(MDMA2_S0_Y_COUNT,val)
+#define bfin_read_MDMA2_S0_X_MODIFY()        bfin_read16(MDMA2_S0_X_MODIFY)
+#define bfin_write_MDMA2_S0_X_MODIFY(val)    bfin_write16(MDMA2_S0_X_MODIFY,val)
+#define bfin_read_MDMA2_S0_Y_MODIFY()        bfin_read16(MDMA2_S0_Y_MODIFY)
+#define bfin_write_MDMA2_S0_Y_MODIFY(val)    bfin_write16(MDMA2_S0_Y_MODIFY,val)
+#define bfin_read_MDMA2_S0_CURR_DESC_PTR()   bfin_read32(MDMA2_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA2_S0_CURR_DESC_PTR(val) bfin_write32(MDMA2_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA2_S0_CURR_ADDR()       bfin_read32(MDMA2_S0_CURR_ADDR)
+#define bfin_write_MDMA2_S0_CURR_ADDR(val)   bfin_write32(MDMA2_S0_CURR_ADDR,val)
+#define bfin_read_MDMA2_S0_CURR_X_COUNT()    bfin_read16(MDMA2_S0_CURR_X_COUNT)
+#define bfin_write_MDMA2_S0_CURR_X_COUNT(val) bfin_write16(MDMA2_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA2_S0_CURR_Y_COUNT()    bfin_read16(MDMA2_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA2_S0_CURR_Y_COUNT(val) bfin_write16(MDMA2_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA2_S0_IRQ_STATUS()      bfin_read16(MDMA2_S0_IRQ_STATUS)
+#define bfin_write_MDMA2_S0_IRQ_STATUS(val)  bfin_write16(MDMA2_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA2_S0_PERIPHERAL_MAP()  bfin_read16(MDMA2_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA2_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA2_S0_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA2_D1_CONFIG()          bfin_read16(MDMA2_D1_CONFIG)
+#define bfin_write_MDMA2_D1_CONFIG(val)      bfin_write16(MDMA2_D1_CONFIG,val)
+#define bfin_read_MDMA2_D1_NEXT_DESC_PTR()   bfin_read32(MDMA2_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA2_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA2_D1_START_ADDR()      bfin_read32(MDMA2_D1_START_ADDR)
+#define bfin_write_MDMA2_D1_START_ADDR(val)  bfin_write32(MDMA2_D1_START_ADDR,val)
+#define bfin_read_MDMA2_D1_X_COUNT()         bfin_read16(MDMA2_D1_X_COUNT)
+#define bfin_write_MDMA2_D1_X_COUNT(val)     bfin_write16(MDMA2_D1_X_COUNT,val)
+#define bfin_read_MDMA2_D1_Y_COUNT()         bfin_read16(MDMA2_D1_Y_COUNT)
+#define bfin_write_MDMA2_D1_Y_COUNT(val)     bfin_write16(MDMA2_D1_Y_COUNT,val)
+#define bfin_read_MDMA2_D1_X_MODIFY()        bfin_read16(MDMA2_D1_X_MODIFY)
+#define bfin_write_MDMA2_D1_X_MODIFY(val)    bfin_write16(MDMA2_D1_X_MODIFY,val)
+#define bfin_read_MDMA2_D1_Y_MODIFY()        bfin_read16(MDMA2_D1_Y_MODIFY)
+#define bfin_write_MDMA2_D1_Y_MODIFY(val)    bfin_write16(MDMA2_D1_Y_MODIFY,val)
+#define bfin_read_MDMA2_D1_CURR_DESC_PTR()   bfin_read32(MDMA2_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA2_D1_CURR_DESC_PTR(val) bfin_write32(MDMA2_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA2_D1_CURR_ADDR()       bfin_read32(MDMA2_D1_CURR_ADDR)
+#define bfin_write_MDMA2_D1_CURR_ADDR(val)   bfin_write32(MDMA2_D1_CURR_ADDR,val)
+#define bfin_read_MDMA2_D1_CURR_X_COUNT()    bfin_read16(MDMA2_D1_CURR_X_COUNT)
+#define bfin_write_MDMA2_D1_CURR_X_COUNT(val) bfin_write16(MDMA2_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA2_D1_CURR_Y_COUNT()    bfin_read16(MDMA2_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA2_D1_CURR_Y_COUNT(val) bfin_write16(MDMA2_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA2_D1_IRQ_STATUS()      bfin_read16(MDMA2_D1_IRQ_STATUS)
+#define bfin_write_MDMA2_D1_IRQ_STATUS(val)  bfin_write16(MDMA2_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA2_D1_PERIPHERAL_MAP()  bfin_read16(MDMA2_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA2_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA2_D1_PERIPHERAL_MAP,val)
+#define bfin_read_MDMA2_S1_CONFIG()          bfin_read16(MDMA2_S1_CONFIG)
+#define bfin_write_MDMA2_S1_CONFIG(val)      bfin_write16(MDMA2_S1_CONFIG,val)
+#define bfin_read_MDMA2_S1_NEXT_DESC_PTR()   bfin_read32(MDMA2_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA2_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA2_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA2_S1_START_ADDR()      bfin_read32(MDMA2_S1_START_ADDR)
+#define bfin_write_MDMA2_S1_START_ADDR(val)  bfin_write32(MDMA2_S1_START_ADDR,val)
+#define bfin_read_MDMA2_S1_X_COUNT()         bfin_read16(MDMA2_S1_X_COUNT)
+#define bfin_write_MDMA2_S1_X_COUNT(val)     bfin_write16(MDMA2_S1_X_COUNT,val)
+#define bfin_read_MDMA2_S1_Y_COUNT()         bfin_read16(MDMA2_S1_Y_COUNT)
+#define bfin_write_MDMA2_S1_Y_COUNT(val)     bfin_write16(MDMA2_S1_Y_COUNT,val)
+#define bfin_read_MDMA2_S1_X_MODIFY()        bfin_read16(MDMA2_S1_X_MODIFY)
+#define bfin_write_MDMA2_S1_X_MODIFY(val)    bfin_write16(MDMA2_S1_X_MODIFY,val)
+#define bfin_read_MDMA2_S1_Y_MODIFY()        bfin_read16(MDMA2_S1_Y_MODIFY)
+#define bfin_write_MDMA2_S1_Y_MODIFY(val)    bfin_write16(MDMA2_S1_Y_MODIFY,val)
+#define bfin_read_MDMA2_S1_CURR_DESC_PTR()   bfin_read32(MDMA2_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA2_S1_CURR_DESC_PTR(val) bfin_write32(MDMA2_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA2_S1_CURR_ADDR()       bfin_read32(MDMA2_S1_CURR_ADDR)
+#define bfin_write_MDMA2_S1_CURR_ADDR(val)   bfin_write32(MDMA2_S1_CURR_ADDR,val)
+#define bfin_read_MDMA2_S1_CURR_X_COUNT()    bfin_read16(MDMA2_S1_CURR_X_COUNT)
+#define bfin_write_MDMA2_S1_CURR_X_COUNT(val) bfin_write16(MDMA2_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA2_S1_CURR_Y_COUNT()    bfin_read16(MDMA2_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA2_S1_CURR_Y_COUNT(val) bfin_write16(MDMA2_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA2_S1_IRQ_STATUS()      bfin_read16(MDMA2_S1_IRQ_STATUS)
+#define bfin_write_MDMA2_S1_IRQ_STATUS(val)  bfin_write16(MDMA2_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA2_S1_PERIPHERAL_MAP()  bfin_read16(MDMA2_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA2_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA2_S1_PERIPHERAL_MAP,val)
+/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
+#define bfin_read_IMDMA_D0_CONFIG()          bfin_read16(IMDMA_D0_CONFIG)
+#define bfin_write_IMDMA_D0_CONFIG(val)      bfin_write16(IMDMA_D0_CONFIG,val)
+#define bfin_read_IMDMA_D0_NEXT_DESC_PTR()   bfin_read32(IMDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_D0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_D0_START_ADDR()      bfin_read32(IMDMA_D0_START_ADDR)
+#define bfin_write_IMDMA_D0_START_ADDR(val)  bfin_write32(IMDMA_D0_START_ADDR,val)
+#define bfin_read_IMDMA_D0_X_COUNT()         bfin_read16(IMDMA_D0_X_COUNT)
+#define bfin_write_IMDMA_D0_X_COUNT(val)     bfin_write16(IMDMA_D0_X_COUNT,val)
+#define bfin_read_IMDMA_D0_Y_COUNT()         bfin_read16(IMDMA_D0_Y_COUNT)
+#define bfin_write_IMDMA_D0_Y_COUNT(val)     bfin_write16(IMDMA_D0_Y_COUNT,val)
+#define bfin_read_IMDMA_D0_X_MODIFY()        bfin_read16(IMDMA_D0_X_MODIFY)
+#define bfin_write_IMDMA_D0_X_MODIFY(val)    bfin_write16(IMDMA_D0_X_MODIFY,val)
+#define bfin_read_IMDMA_D0_Y_MODIFY()        bfin_read16(IMDMA_D0_Y_MODIFY)
+#define bfin_write_IMDMA_D0_Y_MODIFY(val)    bfin_write16(IMDMA_D0_Y_MODIFY,val)
+#define bfin_read_IMDMA_D0_CURR_DESC_PTR()   bfin_read32(IMDMA_D0_CURR_DESC_PTR)
+#define bfin_write_IMDMA_D0_CURR_DESC_PTR(val) bfin_write32(IMDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_D0_CURR_ADDR()       bfin_read32(IMDMA_D0_CURR_ADDR)
+#define bfin_write_IMDMA_D0_CURR_ADDR(val)   bfin_write32(IMDMA_D0_CURR_ADDR,val)
+#define bfin_read_IMDMA_D0_CURR_X_COUNT()    bfin_read16(IMDMA_D0_CURR_X_COUNT)
+#define bfin_write_IMDMA_D0_CURR_X_COUNT(val) bfin_write16(IMDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_D0_CURR_Y_COUNT()    bfin_read16(IMDMA_D0_CURR_Y_COUNT)
+#define bfin_write_IMDMA_D0_CURR_Y_COUNT(val) bfin_write16(IMDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_D0_IRQ_STATUS()      bfin_read16(IMDMA_D0_IRQ_STATUS)
+#define bfin_write_IMDMA_D0_IRQ_STATUS(val)  bfin_write16(IMDMA_D0_IRQ_STATUS,val)
+#define bfin_read_IMDMA_S0_CONFIG()          bfin_read16(IMDMA_S0_CONFIG)
+#define bfin_write_IMDMA_S0_CONFIG(val)      bfin_write16(IMDMA_S0_CONFIG,val)
+#define bfin_read_IMDMA_S0_NEXT_DESC_PTR()   bfin_read32(IMDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_S0_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_S0_START_ADDR()      bfin_read32(IMDMA_S0_START_ADDR)
+#define bfin_write_IMDMA_S0_START_ADDR(val)  bfin_write32(IMDMA_S0_START_ADDR,val)
+#define bfin_read_IMDMA_S0_X_COUNT()         bfin_read16(IMDMA_S0_X_COUNT)
+#define bfin_write_IMDMA_S0_X_COUNT(val)     bfin_write16(IMDMA_S0_X_COUNT,val)
+#define bfin_read_IMDMA_S0_Y_COUNT()         bfin_read16(IMDMA_S0_Y_COUNT)
+#define bfin_write_IMDMA_S0_Y_COUNT(val)     bfin_write16(IMDMA_S0_Y_COUNT,val)
+#define bfin_read_IMDMA_S0_X_MODIFY()        bfin_read16(IMDMA_S0_X_MODIFY)
+#define bfin_write_IMDMA_S0_X_MODIFY(val)    bfin_write16(IMDMA_S0_X_MODIFY,val)
+#define bfin_read_IMDMA_S0_Y_MODIFY()        bfin_read16(IMDMA_S0_Y_MODIFY)
+#define bfin_write_IMDMA_S0_Y_MODIFY(val)    bfin_write16(IMDMA_S0_Y_MODIFY,val)
+#define bfin_read_IMDMA_S0_CURR_DESC_PTR()   bfin_read32(IMDMA_S0_CURR_DESC_PTR)
+#define bfin_write_IMDMA_S0_CURR_DESC_PTR(val) bfin_write32(IMDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_S0_CURR_ADDR()       bfin_read32(IMDMA_S0_CURR_ADDR)
+#define bfin_write_IMDMA_S0_CURR_ADDR(val)   bfin_write32(IMDMA_S0_CURR_ADDR,val)
+#define bfin_read_IMDMA_S0_CURR_X_COUNT()    bfin_read16(IMDMA_S0_CURR_X_COUNT)
+#define bfin_write_IMDMA_S0_CURR_X_COUNT(val) bfin_write16(IMDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_S0_CURR_Y_COUNT()    bfin_read16(IMDMA_S0_CURR_Y_COUNT)
+#define bfin_write_IMDMA_S0_CURR_Y_COUNT(val) bfin_write16(IMDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_S0_IRQ_STATUS()      bfin_read16(IMDMA_S0_IRQ_STATUS)
+#define bfin_write_IMDMA_S0_IRQ_STATUS(val)  bfin_write16(IMDMA_S0_IRQ_STATUS,val)
+#define bfin_read_IMDMA_D1_CONFIG()          bfin_read16(IMDMA_D1_CONFIG)
+#define bfin_write_IMDMA_D1_CONFIG(val)      bfin_write16(IMDMA_D1_CONFIG,val)
+#define bfin_read_IMDMA_D1_NEXT_DESC_PTR()   bfin_read32(IMDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_D1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_D1_START_ADDR()      bfin_read32(IMDMA_D1_START_ADDR)
+#define bfin_write_IMDMA_D1_START_ADDR(val)  bfin_write32(IMDMA_D1_START_ADDR,val)
+#define bfin_read_IMDMA_D1_X_COUNT()         bfin_read16(IMDMA_D1_X_COUNT)
+#define bfin_write_IMDMA_D1_X_COUNT(val)     bfin_write16(IMDMA_D1_X_COUNT,val)
+#define bfin_read_IMDMA_D1_Y_COUNT()         bfin_read16(IMDMA_D1_Y_COUNT)
+#define bfin_write_IMDMA_D1_Y_COUNT(val)     bfin_write16(IMDMA_D1_Y_COUNT,val)
+#define bfin_read_IMDMA_D1_X_MODIFY()        bfin_read16(IMDMA_D1_X_MODIFY)
+#define bfin_write_IMDMA_D1_X_MODIFY(val)    bfin_write16(IMDMA_D1_X_MODIFY,val)
+#define bfin_read_IMDMA_D1_Y_MODIFY()        bfin_read16(IMDMA_D1_Y_MODIFY)
+#define bfin_write_IMDMA_D1_Y_MODIFY(val)    bfin_write16(IMDMA_D1_Y_MODIFY,val)
+#define bfin_read_IMDMA_D1_CURR_DESC_PTR()   bfin_read32(IMDMA_D1_CURR_DESC_PTR)
+#define bfin_write_IMDMA_D1_CURR_DESC_PTR(val) bfin_write32(IMDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_D1_CURR_ADDR()       bfin_read32(IMDMA_D1_CURR_ADDR)
+#define bfin_write_IMDMA_D1_CURR_ADDR(val)   bfin_write32(IMDMA_D1_CURR_ADDR,val)
+#define bfin_read_IMDMA_D1_CURR_X_COUNT()    bfin_read16(IMDMA_D1_CURR_X_COUNT)
+#define bfin_write_IMDMA_D1_CURR_X_COUNT(val) bfin_write16(IMDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_D1_CURR_Y_COUNT()    bfin_read16(IMDMA_D1_CURR_Y_COUNT)
+#define bfin_write_IMDMA_D1_CURR_Y_COUNT(val) bfin_write16(IMDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_D1_IRQ_STATUS()      bfin_read16(IMDMA_D1_IRQ_STATUS)
+#define bfin_write_IMDMA_D1_IRQ_STATUS(val)  bfin_write16(IMDMA_D1_IRQ_STATUS,val)
+#define bfin_read_IMDMA_S1_CONFIG()          bfin_read16(IMDMA_S1_CONFIG)
+#define bfin_write_IMDMA_S1_CONFIG(val)      bfin_write16(IMDMA_S1_CONFIG,val)
+#define bfin_read_IMDMA_S1_NEXT_DESC_PTR()   bfin_read32(IMDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_IMDMA_S1_NEXT_DESC_PTR(val) bfin_write32(IMDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_IMDMA_S1_START_ADDR()      bfin_read32(IMDMA_S1_START_ADDR)
+#define bfin_write_IMDMA_S1_START_ADDR(val)  bfin_write32(IMDMA_S1_START_ADDR,val)
+#define bfin_read_IMDMA_S1_X_COUNT()         bfin_read16(IMDMA_S1_X_COUNT)
+#define bfin_write_IMDMA_S1_X_COUNT(val)     bfin_write16(IMDMA_S1_X_COUNT,val)
+#define bfin_read_IMDMA_S1_Y_COUNT()         bfin_read16(IMDMA_S1_Y_COUNT)
+#define bfin_write_IMDMA_S1_Y_COUNT(val)     bfin_write16(IMDMA_S1_Y_COUNT,val)
+#define bfin_read_IMDMA_S1_X_MODIFY()        bfin_read16(IMDMA_S1_X_MODIFY)
+#define bfin_write_IMDMA_S1_X_MODIFY(val)    bfin_write16(IMDMA_S1_X_MODIFY,val)
+#define bfin_read_IMDMA_S1_Y_MODIFY()        bfin_read16(IMDMA_S1_Y_MODIFY)
+#define bfin_write_IMDMA_S1_Y_MODIFY(val)    bfin_write16(IMDMA_S1_Y_MODIFY,val)
+#define bfin_read_IMDMA_S1_CURR_DESC_PTR()   bfin_read32(IMDMA_S1_CURR_DESC_PTR)
+#define bfin_write_IMDMA_S1_CURR_DESC_PTR(val) bfin_write32(IMDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_IMDMA_S1_CURR_ADDR()       bfin_read32(IMDMA_S1_CURR_ADDR)
+#define bfin_write_IMDMA_S1_CURR_ADDR(val)   bfin_write32(IMDMA_S1_CURR_ADDR,val)
+#define bfin_read_IMDMA_S1_CURR_X_COUNT()    bfin_read16(IMDMA_S1_CURR_X_COUNT)
+#define bfin_write_IMDMA_S1_CURR_X_COUNT(val) bfin_write16(IMDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_IMDMA_S1_CURR_Y_COUNT()    bfin_read16(IMDMA_S1_CURR_Y_COUNT)
+#define bfin_write_IMDMA_S1_CURR_Y_COUNT(val) bfin_write16(IMDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_IMDMA_S1_IRQ_STATUS()      bfin_read16(IMDMA_S1_IRQ_STATUS)
+#define bfin_write_IMDMA_S1_IRQ_STATUS(val)  bfin_write16(IMDMA_S1_IRQ_STATUS,val)
+
+#define bfin_read_MDMA_S0_CONFIG()  bfin_read_MDMA1_S0_CONFIG()
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write_MDMA1_S0_CONFIG(val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()  bfin_read_MDMA1_S0_IRQ_STATUS()
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write_MDMA1_S0_IRQ_STATUS(val)
+#define bfin_read_MDMA_S0_X_MODIFY()  bfin_read_MDMA1_S0_X_MODIFY()
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write_MDMA1_S0_X_MODIFY(val)
+#define bfin_read_MDMA_S0_Y_MODIFY()  bfin_read_MDMA1_S0_Y_MODIFY()
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write_MDMA1_S0_Y_MODIFY(val)
+#define bfin_read_MDMA_S0_X_COUNT()  bfin_read_MDMA1_S0_X_COUNT()
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write_MDMA1_S0_X_COUNT(val)
+#define bfin_read_MDMA_S0_Y_COUNT()  bfin_read_MDMA1_S0_Y_COUNT()
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write_MDMA1_S0_Y_COUNT(val)
+#define bfin_read_MDMA_S0_START_ADDR()  bfin_read_MDMA1_S0_START_ADDR()
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write_MDMA1_S0_START_ADDR(val)
+#define bfin_read_MDMA_D0_CONFIG()  bfin_read_MDMA1_D0_CONFIG()
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write_MDMA1_D0_CONFIG(val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()  bfin_read_MDMA1_D0_IRQ_STATUS()
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write_MDMA1_D0_IRQ_STATUS(val)
+#define bfin_read_MDMA_D0_X_MODIFY()  bfin_read_MDMA1_D0_X_MODIFY()
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write_MDMA1_D0_X_MODIFY(val)
+#define bfin_read_MDMA_D0_Y_MODIFY()  bfin_read_MDMA1_D0_Y_MODIFY()
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write_MDMA1_D0_Y_MODIFY(val)
+#define bfin_read_MDMA_D0_X_COUNT()  bfin_read_MDMA1_D0_X_COUNT()
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write_MDMA1_D0_X_COUNT(val)
+#define bfin_read_MDMA_D0_Y_COUNT()  bfin_read_MDMA1_D0_Y_COUNT()
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write_MDMA1_D0_Y_COUNT(val)
+#define bfin_read_MDMA_D0_START_ADDR()  bfin_read_MDMA1_D0_START_ADDR()
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write_MDMA1_D0_START_ADDR(val)
+
+#endif				/* _CDEF_BF561_H */
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
new file mode 100644
index 00000000000..4eca2026bb9
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -0,0 +1,1758 @@
+
+/*
+ * File:         include/asm-blackfin/mach-bf561/defBF561.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF561_H
+#define _DEF_BF561_H
+/*
+#if !defined(__ADSPBF561__)
+#warning defBF561.h should only be included for BF561 chip.
+#endif
+*/
+/* include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+
+#define PLL_CTL                0xFFC00000	/* PLL Control register (16-bit) */
+#define PLL_DIV			        0xFFC00004	/* PLL Divide Register (16-bit) */
+#define VR_CTL			        0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
+#define PLL_STAT               0xFFC0000C	/* PLL Status register (16-bit) */
+#define PLL_LOCKCNT            0xFFC00010	/* PLL Lock Count register (16-bit) */
+#define CHIPID                 0xFFC00014       /* Chip ID Register */
+
+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define SWRST                   SICA_SWRST
+#define SYSCR                   SICA_SYSCR
+#define DOUBLE_FAULT            (DOUBLE_FAULT_B|DOUBLE_FAULT_A)
+#define RESET_DOUBLE            (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
+#define RESET_WDOG              (SWRST_WDT_B|SWRST_WDT_A)
+#define RESET_SOFTWARE          (SWRST_OCCURRED)
+
+/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
+#define SICA_SWRST              0xFFC00100	/* Software Reset register */
+#define SICA_SYSCR              0xFFC00104	/* System Reset Configuration register */
+#define SICA_RVECT              0xFFC00108	/* SIC Reset Vector Address Register */
+#define SICA_IMASK              0xFFC0010C	/* SIC Interrupt Mask register 0 - hack to fix old tests */
+#define SICA_IMASK0             0xFFC0010C	/* SIC Interrupt Mask register 0 */
+#define SICA_IMASK1             0xFFC00110	/* SIC Interrupt Mask register 1 */
+#define SICA_IAR0               0xFFC00124	/* SIC Interrupt Assignment Register 0 */
+#define SICA_IAR1               0xFFC00128	/* SIC Interrupt Assignment Register 1 */
+#define SICA_IAR2               0xFFC0012C	/* SIC Interrupt Assignment Register 2 */
+#define SICA_IAR3               0xFFC00130	/* SIC Interrupt Assignment Register 3 */
+#define SICA_IAR4               0xFFC00134	/* SIC Interrupt Assignment Register 4 */
+#define SICA_IAR5               0xFFC00138	/* SIC Interrupt Assignment Register 5 */
+#define SICA_IAR6               0xFFC0013C	/* SIC Interrupt Assignment Register 6 */
+#define SICA_IAR7               0xFFC00140	/* SIC Interrupt Assignment Register 7 */
+#define SICA_ISR0               0xFFC00114	/* SIC Interrupt Status register 0 */
+#define SICA_ISR1               0xFFC00118	/* SIC Interrupt Status register 1 */
+#define SICA_IWR0               0xFFC0011C	/* SIC Interrupt Wakeup-Enable register 0 */
+#define SICA_IWR1               0xFFC00120	/* SIC Interrupt Wakeup-Enable register 1 */
+
+/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
+#define SICB_SWRST              0xFFC01100	/* reserved */
+#define SICB_SYSCR              0xFFC01104	/* reserved */
+#define SICB_RVECT              0xFFC01108	/* SIC Reset Vector Address Register */
+#define SICB_IMASK0             0xFFC0110C	/* SIC Interrupt Mask register 0 */
+#define SICB_IMASK1             0xFFC01110	/* SIC Interrupt Mask register 1 */
+#define SICB_IAR0               0xFFC01124	/* SIC Interrupt Assignment Register 0 */
+#define SICB_IAR1               0xFFC01128	/* SIC Interrupt Assignment Register 1 */
+#define SICB_IAR2               0xFFC0112C	/* SIC Interrupt Assignment Register 2 */
+#define SICB_IAR3               0xFFC01130	/* SIC Interrupt Assignment Register 3 */
+#define SICB_IAR4               0xFFC01134	/* SIC Interrupt Assignment Register 4 */
+#define SICB_IAR5               0xFFC01138	/* SIC Interrupt Assignment Register 5 */
+#define SICB_IAR6               0xFFC0113C	/* SIC Interrupt Assignment Register 6 */
+#define SICB_IAR7               0xFFC01140	/* SIC Interrupt Assignment Register 7 */
+#define SICB_ISR0               0xFFC01114	/* SIC Interrupt Status register 0 */
+#define SICB_ISR1               0xFFC01118	/* SIC Interrupt Status register 1 */
+#define SICB_IWR0               0xFFC0111C	/* SIC Interrupt Wakeup-Enable register 0 */
+#define SICB_IWR1               0xFFC01120	/* SIC Interrupt Wakeup-Enable register 1 */
+
+/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
+#define WDOGA_CTL 				0xFFC00200	/* Watchdog Control register */
+#define WDOGA_CNT 				0xFFC00204	/* Watchdog Count register */
+#define WDOGA_STAT 				0xFFC00208	/* Watchdog Status register */
+
+/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
+#define WDOGB_CTL 				0xFFC01200	/* Watchdog Control register */
+#define WDOGB_CNT 				0xFFC01204	/* Watchdog Count register */
+#define WDOGB_STAT 				0xFFC01208	/* Watchdog Status register */
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+
+/*
+ * Because include/linux/serial_reg.h have defined UART_*,
+ * So we define blackfin uart regs to BFIN_UART0_*.
+ */
+#define BFIN_UART_THR			0xFFC00400  /* Transmit Holding register */
+#define BFIN_UART_RBR			0xFFC00400  /* Receive Buffer register */
+#define BFIN_UART_DLL			0xFFC00400  /* Divisor Latch (Low-Byte) */
+#define BFIN_UART_IER			0xFFC00404  /* Interrupt Enable Register */
+#define BFIN_UART_DLH			0xFFC00404  /* Divisor Latch (High-Byte) */
+#define BFIN_UART_IIR			0xFFC00408  /* Interrupt Identification Register */
+#define BFIN_UART_LCR			0xFFC0040C  /* Line Control Register */
+#define BFIN_UART_MCR			0xFFC00410  /* Modem Control Register */
+#define BFIN_UART_LSR			0xFFC00414  /* Line Status Register */
+#define BFIN_UART_MSR			0xFFC00418  /* Modem Status Register */
+#define BFIN_UART_SCR			0xFFC0041C  /* SCR Scratch Register */
+#define BFIN_UART_GCTL			0xFFC00424  /* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE          		0xFFC00500
+#define SPI_CTL               		0xFFC00500	/* SPI Control Register */
+#define SPI_FLG               		0xFFC00504	/* SPI Flag register */
+#define SPI_STAT              		0xFFC00508	/* SPI Status register */
+#define SPI_TDBR              		0xFFC0050C	/* SPI Transmit Data Buffer Register */
+#define SPI_RDBR              		0xFFC00510	/* SPI Receive Data Buffer Register */
+#define SPI_BAUD              		0xFFC00514	/* SPI Baud rate Register */
+#define SPI_SHADOW            		0xFFC00518	/* SPI_RDBR Shadow Register */
+
+/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
+#define TIMER0_CONFIG 				0xFFC00600	/* Timer0 Configuration register */
+#define TIMER0_COUNTER 				0xFFC00604	/* Timer0 Counter register */
+#define TIMER0_PERIOD 				0xFFC00608	/* Timer0 Period register */
+#define TIMER0_WIDTH 				0xFFC0060C	/* Timer0 Width register */
+
+#define TIMER1_CONFIG 				0xFFC00610	/* Timer1 Configuration register */
+#define TIMER1_COUNTER 				0xFFC00614	/* Timer1 Counter register */
+#define TIMER1_PERIOD 				0xFFC00618	/* Timer1 Period register */
+#define TIMER1_WIDTH 				0xFFC0061C	/* Timer1 Width register */
+
+#define TIMER2_CONFIG 				0xFFC00620	/* Timer2 Configuration register */
+#define TIMER2_COUNTER 				0xFFC00624	/* Timer2 Counter register */
+#define TIMER2_PERIOD 				0xFFC00628	/* Timer2 Period register */
+#define TIMER2_WIDTH 				0xFFC0062C	/* Timer2 Width register */
+
+#define TIMER3_CONFIG 				0xFFC00630	/* Timer3 Configuration register */
+#define TIMER3_COUNTER 				0xFFC00634	/* Timer3 Counter register */
+#define TIMER3_PERIOD 				0xFFC00638	/* Timer3 Period register */
+#define TIMER3_WIDTH 				0xFFC0063C	/* Timer3 Width register */
+
+#define TIMER4_CONFIG 				0xFFC00640	/* Timer4 Configuration register */
+#define TIMER4_COUNTER 				0xFFC00644	/* Timer4 Counter register */
+#define TIMER4_PERIOD 				0xFFC00648	/* Timer4 Period register */
+#define TIMER4_WIDTH 				0xFFC0064C	/* Timer4 Width register */
+
+#define TIMER5_CONFIG 				0xFFC00650	/* Timer5 Configuration register */
+#define TIMER5_COUNTER 				0xFFC00654	/* Timer5 Counter register */
+#define TIMER5_PERIOD 				0xFFC00658	/* Timer5 Period register */
+#define TIMER5_WIDTH 				0xFFC0065C	/* Timer5 Width register */
+
+#define TIMER6_CONFIG 				0xFFC00660	/* Timer6 Configuration register */
+#define TIMER6_COUNTER 				0xFFC00664	/* Timer6 Counter register */
+#define TIMER6_PERIOD 				0xFFC00668	/* Timer6 Period register */
+#define TIMER6_WIDTH 				0xFFC0066C	/* Timer6 Width register */
+
+#define TIMER7_CONFIG 				0xFFC00670	/* Timer7 Configuration register */
+#define TIMER7_COUNTER 				0xFFC00674	/* Timer7 Counter register */
+#define TIMER7_PERIOD 				0xFFC00678	/* Timer7 Period register */
+#define TIMER7_WIDTH 				0xFFC0067C	/* Timer7 Width register */
+
+#define TMRS8_ENABLE 				0xFFC00680	/* Timer Enable Register */
+#define TMRS8_DISABLE 				0xFFC00684	/* Timer Disable register */
+#define TMRS8_STATUS 				0xFFC00688	/* Timer Status register */
+
+/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
+#define TIMER8_CONFIG 				0xFFC01600	/* Timer8 Configuration register */
+#define TIMER8_COUNTER 				0xFFC01604	/* Timer8 Counter register */
+#define TIMER8_PERIOD 				0xFFC01608	/* Timer8 Period register */
+#define TIMER8_WIDTH 				0xFFC0160C	/* Timer8 Width register */
+
+#define TIMER9_CONFIG 				0xFFC01610	/* Timer9 Configuration register */
+#define TIMER9_COUNTER 				0xFFC01614	/* Timer9 Counter register */
+#define TIMER9_PERIOD 				0xFFC01618	/* Timer9 Period register */
+#define TIMER9_WIDTH 				0xFFC0161C	/* Timer9 Width register */
+
+#define TIMER10_CONFIG 				0xFFC01620	/* Timer10 Configuration register */
+#define TIMER10_COUNTER 			0xFFC01624	/* Timer10 Counter register */
+#define TIMER10_PERIOD 				0xFFC01628	/* Timer10 Period register */
+#define TIMER10_WIDTH 				0xFFC0162C	/* Timer10 Width register */
+
+#define TIMER11_CONFIG 				0xFFC01630	/* Timer11 Configuration register */
+#define TIMER11_COUNTER 			0xFFC01634	/* Timer11 Counter register */
+#define TIMER11_PERIOD 				0xFFC01638	/* Timer11 Period register */
+#define TIMER11_WIDTH 				0xFFC0163C	/* Timer11 Width register */
+
+#define TMRS4_ENABLE 				0xFFC01640	/* Timer Enable Register */
+#define TMRS4_DISABLE 				0xFFC01644	/* Timer Disable register */
+#define TMRS4_STATUS 				0xFFC01648	/* Timer Status register */
+
+/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
+#define FIO0_FLAG_D 				0xFFC00700	/* Flag Data register */
+#define FIO0_FLAG_C 				0xFFC00704	/* Flag Clear register */
+#define FIO0_FLAG_S 				0xFFC00708	/* Flag Set register */
+#define FIO0_FLAG_T 				0xFFC0070C	/* Flag Toggle register */
+#define FIO0_MASKA_D 				0xFFC00710	/* Flag Mask Interrupt A Data register */
+#define FIO0_MASKA_C 				0xFFC00714	/* Flag Mask Interrupt A Clear register */
+#define FIO0_MASKA_S 				0xFFC00718	/* Flag Mask Interrupt A Set register */
+#define FIO0_MASKA_T 				0xFFC0071C	/* Flag Mask Interrupt A Toggle register */
+#define FIO0_MASKB_D 				0xFFC00720	/* Flag Mask Interrupt B Data register */
+#define FIO0_MASKB_C 				0xFFC00724	/* Flag Mask Interrupt B Clear register */
+#define FIO0_MASKB_S 				0xFFC00728	/* Flag Mask Interrupt B Set register */
+#define FIO0_MASKB_T 				0xFFC0072C	/* Flag Mask Interrupt B Toggle register */
+#define FIO0_DIR 					0xFFC00730	/* Flag Direction register */
+#define FIO0_POLAR 					0xFFC00734	/* Flag Polarity register */
+#define FIO0_EDGE 					0xFFC00738	/* Flag Interrupt Sensitivity register */
+#define FIO0_BOTH 					0xFFC0073C	/* Flag Set on Both Edges register */
+#define FIO0_INEN 					0xFFC00740	/* Flag Input Enable register */
+
+/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
+#define FIO1_FLAG_D 				0xFFC01500	/* Flag Data register (mask used to directly */
+#define FIO1_FLAG_C 				0xFFC01504	/* Flag Clear register */
+#define FIO1_FLAG_S 				0xFFC01508	/* Flag Set register */
+#define FIO1_FLAG_T 				0xFFC0150C	/* Flag Toggle register (mask used to */
+#define FIO1_MASKA_D 				0xFFC01510	/* Flag Mask Interrupt A Data register */
+#define FIO1_MASKA_C 				0xFFC01514	/* Flag Mask Interrupt A Clear register */
+#define FIO1_MASKA_S 				0xFFC01518	/* Flag Mask Interrupt A Set register */
+#define FIO1_MASKA_T 				0xFFC0151C	/* Flag Mask Interrupt A Toggle register */
+#define FIO1_MASKB_D 				0xFFC01520	/* Flag Mask Interrupt B Data register */
+#define FIO1_MASKB_C 				0xFFC01524	/* Flag Mask Interrupt B Clear register */
+#define FIO1_MASKB_S 				0xFFC01528	/* Flag Mask Interrupt B Set register */
+#define FIO1_MASKB_T 				0xFFC0152C	/* Flag Mask Interrupt B Toggle register */
+#define FIO1_DIR 					0xFFC01530	/* Flag Direction register */
+#define FIO1_POLAR 					0xFFC01534	/* Flag Polarity register */
+#define FIO1_EDGE 					0xFFC01538	/* Flag Interrupt Sensitivity register */
+#define FIO1_BOTH 					0xFFC0153C	/* Flag Set on Both Edges register */
+#define FIO1_INEN 					0xFFC01540	/* Flag Input Enable register */
+
+/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
+#define FIO2_FLAG_D 				0xFFC01700	/* Flag Data register (mask used to directly */
+#define FIO2_FLAG_C 				0xFFC01704	/* Flag Clear register */
+#define FIO2_FLAG_S 				0xFFC01708	/* Flag Set register */
+#define FIO2_FLAG_T 				0xFFC0170C	/* Flag Toggle register (mask used to */
+#define FIO2_MASKA_D 				0xFFC01710	/* Flag Mask Interrupt A Data register */
+#define FIO2_MASKA_C 				0xFFC01714	/* Flag Mask Interrupt A Clear register */
+#define FIO2_MASKA_S 				0xFFC01718	/* Flag Mask Interrupt A Set register */
+#define FIO2_MASKA_T 				0xFFC0171C	/* Flag Mask Interrupt A Toggle register */
+#define FIO2_MASKB_D 				0xFFC01720	/* Flag Mask Interrupt B Data register */
+#define FIO2_MASKB_C 				0xFFC01724	/* Flag Mask Interrupt B Clear register */
+#define FIO2_MASKB_S 				0xFFC01728	/* Flag Mask Interrupt B Set register */
+#define FIO2_MASKB_T 				0xFFC0172C	/* Flag Mask Interrupt B Toggle register */
+#define FIO2_DIR 					0xFFC01730	/* Flag Direction register */
+#define FIO2_POLAR 					0xFFC01734	/* Flag Polarity register */
+#define FIO2_EDGE 					0xFFC01738	/* Flag Interrupt Sensitivity register */
+#define FIO2_BOTH 					0xFFC0173C	/* Flag Set on Both Edges register */
+#define FIO2_INEN 					0xFFC01740	/* Flag Input Enable register */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1     	 	0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2      	 	0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV        		0xFFC00808	/* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV          		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX	             	0xFFC00810	/* SPORT0 TX Data Register */
+#define SPORT0_RX	            	0xFFC00818	/* SPORT0 RX Data Register */
+#define SPORT0_RCR1      	 		0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2      	 		0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV        		0xFFC00828	/* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV          		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT            		0xFFC00830	/* SPORT0 Status Register */
+#define SPORT0_CHNL            		0xFFC00834	/* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1           		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2           		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0           		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1           		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2           		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3           		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0           		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1           		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2           		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3           		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1     	 		0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2      	 		0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV        		0xFFC00908	/* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV          		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX	             	0xFFC00910	/* SPORT1 TX Data Register */
+#define SPORT1_RX	            	0xFFC00918	/* SPORT1 RX Data Register */
+#define SPORT1_RCR1      	 		0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2      	 		0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV        		0xFFC00928	/* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV          		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT            		0xFFC00930	/* SPORT1 Status Register */
+#define SPORT1_CHNL            		0xFFC00934	/* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1           		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2           		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0           		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1           		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2           		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3           		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0           		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1           		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2           		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3           		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* Asynchronous Memory Controller - External Bus Interface Unit  */
+#define EBIU_AMGCTL					0xFFC00A00	/* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0				0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1				0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define EBIU_SDGCTL					0xFFC00A10	/* SDRAM Global Control Register */
+#define EBIU_SDBCTL					0xFFC00A14	/* SDRAM Bank Control Register */
+#define EBIU_SDRRC 					0xFFC00A18	/* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT					0xFFC00A1C	/* SDRAM Status Register */
+
+/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
+#define PPI0_CONTROL 				0xFFC01000	/* PPI0 Control register */
+#define PPI0_STATUS 				0xFFC01004	/* PPI0 Status register */
+#define PPI0_COUNT 					0xFFC01008	/* PPI0 Transfer Count register */
+#define PPI0_DELAY 					0xFFC0100C	/* PPI0 Delay Count register */
+#define PPI0_FRAME 					0xFFC01010	/* PPI0 Frame Length register */
+
+/*Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
+#define PPI1_CONTROL 				0xFFC01300	/* PPI1 Control register */
+#define PPI1_STATUS 				0xFFC01304	/* PPI1 Status register */
+#define PPI1_COUNT 					0xFFC01308	/* PPI1 Transfer Count register */
+#define PPI1_DELAY 					0xFFC0130C	/* PPI1 Delay Count register */
+#define PPI1_FRAME 					0xFFC01310	/* PPI1 Frame Length register */
+
+/*DMA traffic control registers */
+#define	DMA1_TC_PER  0xFFC01B0C	/* Traffic control periods */
+#define	DMA1_TC_CNT  0xFFC01B10	/* Traffic control current counts */
+#define	DMA2_TC_PER  0xFFC00B0C	/* Traffic control periods */
+#define	DMA2_TC_CNT  0xFFC00B10	/* Traffic control current counts        */
+
+/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
+#define DMA1_0_CONFIG 0xFFC01C08	/* DMA1 Channel 0 Configuration register */
+#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00	/* DMA1 Channel 0 Next Descripter Ptr Reg */
+#define DMA1_0_START_ADDR 0xFFC01C04	/* DMA1 Channel 0 Start Address */
+#define DMA1_0_X_COUNT 0xFFC01C10	/* DMA1 Channel 0 Inner Loop Count */
+#define DMA1_0_Y_COUNT 0xFFC01C18	/* DMA1 Channel 0 Outer Loop Count */
+#define DMA1_0_X_MODIFY 0xFFC01C14	/* DMA1 Channel 0 Inner Loop Addr Increment */
+#define DMA1_0_Y_MODIFY 0xFFC01C1C	/* DMA1 Channel 0 Outer Loop Addr Increment */
+#define DMA1_0_CURR_DESC_PTR 0xFFC01C20	/* DMA1 Channel 0 Current Descriptor Pointer */
+#define DMA1_0_CURR_ADDR 0xFFC01C24	/* DMA1 Channel 0 Current Address Pointer */
+#define DMA1_0_CURR_X_COUNT 0xFFC01C30	/* DMA1 Channel 0 Current Inner Loop Count */
+#define DMA1_0_CURR_Y_COUNT 0xFFC01C38	/* DMA1 Channel 0 Current Outer Loop Count */
+#define DMA1_0_IRQ_STATUS 0xFFC01C28	/* DMA1 Channel 0 Interrupt/Status Register */
+#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C	/* DMA1 Channel 0 Peripheral Map Register */
+
+#define DMA1_1_CONFIG 0xFFC01C48	/* DMA1 Channel 1 Configuration register */
+#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40	/* DMA1 Channel 1 Next Descripter Ptr Reg */
+#define DMA1_1_START_ADDR 0xFFC01C44	/* DMA1 Channel 1 Start Address */
+#define DMA1_1_X_COUNT 0xFFC01C50	/* DMA1 Channel 1 Inner Loop Count */
+#define DMA1_1_Y_COUNT 0xFFC01C58	/* DMA1 Channel 1 Outer Loop Count */
+#define DMA1_1_X_MODIFY 0xFFC01C54	/* DMA1 Channel 1 Inner Loop Addr Increment */
+#define DMA1_1_Y_MODIFY 0xFFC01C5C	/* DMA1 Channel 1 Outer Loop Addr Increment */
+#define DMA1_1_CURR_DESC_PTR 0xFFC01C60	/* DMA1 Channel 1 Current Descriptor Pointer */
+#define DMA1_1_CURR_ADDR 0xFFC01C64	/* DMA1 Channel 1 Current Address Pointer */
+#define DMA1_1_CURR_X_COUNT 0xFFC01C70	/* DMA1 Channel 1 Current Inner Loop Count */
+#define DMA1_1_CURR_Y_COUNT 0xFFC01C78	/* DMA1 Channel 1 Current Outer Loop Count */
+#define DMA1_1_IRQ_STATUS 0xFFC01C68	/* DMA1 Channel 1 Interrupt/Status Register */
+#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C	/* DMA1 Channel 1 Peripheral Map Register */
+
+#define DMA1_2_CONFIG 0xFFC01C88	/* DMA1 Channel 2 Configuration register */
+#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80	/* DMA1 Channel 2 Next Descripter Ptr Reg */
+#define DMA1_2_START_ADDR 0xFFC01C84	/* DMA1 Channel 2 Start Address */
+#define DMA1_2_X_COUNT 0xFFC01C90	/* DMA1 Channel 2 Inner Loop Count */
+#define DMA1_2_Y_COUNT 0xFFC01C98	/* DMA1 Channel 2 Outer Loop Count */
+#define DMA1_2_X_MODIFY 0xFFC01C94	/* DMA1 Channel 2 Inner Loop Addr Increment */
+#define DMA1_2_Y_MODIFY 0xFFC01C9C	/* DMA1 Channel 2 Outer Loop Addr Increment */
+#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0	/* DMA1 Channel 2 Current Descriptor Pointer */
+#define DMA1_2_CURR_ADDR 0xFFC01CA4	/* DMA1 Channel 2 Current Address Pointer */
+#define DMA1_2_CURR_X_COUNT 0xFFC01CB0	/* DMA1 Channel 2 Current Inner Loop Count */
+#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8	/* DMA1 Channel 2 Current Outer Loop Count */
+#define DMA1_2_IRQ_STATUS 0xFFC01CA8	/* DMA1 Channel 2 Interrupt/Status Register */
+#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC	/* DMA1 Channel 2 Peripheral Map Register */
+
+#define DMA1_3_CONFIG 0xFFC01CC8	/* DMA1 Channel 3 Configuration register */
+#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0	/* DMA1 Channel 3 Next Descripter Ptr Reg */
+#define DMA1_3_START_ADDR 0xFFC01CC4	/* DMA1 Channel 3 Start Address */
+#define DMA1_3_X_COUNT 0xFFC01CD0	/* DMA1 Channel 3 Inner Loop Count */
+#define DMA1_3_Y_COUNT 0xFFC01CD8	/* DMA1 Channel 3 Outer Loop Count */
+#define DMA1_3_X_MODIFY 0xFFC01CD4	/* DMA1 Channel 3 Inner Loop Addr Increment */
+#define DMA1_3_Y_MODIFY 0xFFC01CDC	/* DMA1 Channel 3 Outer Loop Addr Increment */
+#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0	/* DMA1 Channel 3 Current Descriptor Pointer */
+#define DMA1_3_CURR_ADDR 0xFFC01CE4	/* DMA1 Channel 3 Current Address Pointer */
+#define DMA1_3_CURR_X_COUNT 0xFFC01CF0	/* DMA1 Channel 3 Current Inner Loop Count */
+#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8	/* DMA1 Channel 3 Current Outer Loop Count */
+#define DMA1_3_IRQ_STATUS 0xFFC01CE8	/* DMA1 Channel 3 Interrupt/Status Register */
+#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC	/* DMA1 Channel 3 Peripheral Map Register */
+
+#define DMA1_4_CONFIG 0xFFC01D08	/* DMA1 Channel 4 Configuration register */
+#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00	/* DMA1 Channel 4 Next Descripter Ptr Reg */
+#define DMA1_4_START_ADDR 0xFFC01D04	/* DMA1 Channel 4 Start Address */
+#define DMA1_4_X_COUNT 0xFFC01D10	/* DMA1 Channel 4 Inner Loop Count */
+#define DMA1_4_Y_COUNT 0xFFC01D18	/* DMA1 Channel 4 Outer Loop Count */
+#define DMA1_4_X_MODIFY 0xFFC01D14	/* DMA1 Channel 4 Inner Loop Addr Increment */
+#define DMA1_4_Y_MODIFY 0xFFC01D1C	/* DMA1 Channel 4 Outer Loop Addr Increment */
+#define DMA1_4_CURR_DESC_PTR 0xFFC01D20	/* DMA1 Channel 4 Current Descriptor Pointer */
+#define DMA1_4_CURR_ADDR 0xFFC01D24	/* DMA1 Channel 4 Current Address Pointer */
+#define DMA1_4_CURR_X_COUNT 0xFFC01D30	/* DMA1 Channel 4 Current Inner Loop Count */
+#define DMA1_4_CURR_Y_COUNT 0xFFC01D38	/* DMA1 Channel 4 Current Outer Loop Count */
+#define DMA1_4_IRQ_STATUS 0xFFC01D28	/* DMA1 Channel 4 Interrupt/Status Register */
+#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C	/* DMA1 Channel 4 Peripheral Map Register */
+
+#define DMA1_5_CONFIG 0xFFC01D48	/* DMA1 Channel 5 Configuration register */
+#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40	/* DMA1 Channel 5 Next Descripter Ptr Reg */
+#define DMA1_5_START_ADDR 0xFFC01D44	/* DMA1 Channel 5 Start Address */
+#define DMA1_5_X_COUNT 0xFFC01D50	/* DMA1 Channel 5 Inner Loop Count */
+#define DMA1_5_Y_COUNT 0xFFC01D58	/* DMA1 Channel 5 Outer Loop Count */
+#define DMA1_5_X_MODIFY 0xFFC01D54	/* DMA1 Channel 5 Inner Loop Addr Increment */
+#define DMA1_5_Y_MODIFY 0xFFC01D5C	/* DMA1 Channel 5 Outer Loop Addr Increment */
+#define DMA1_5_CURR_DESC_PTR 0xFFC01D60	/* DMA1 Channel 5 Current Descriptor Pointer */
+#define DMA1_5_CURR_ADDR 0xFFC01D64	/* DMA1 Channel 5 Current Address Pointer */
+#define DMA1_5_CURR_X_COUNT 0xFFC01D70	/* DMA1 Channel 5 Current Inner Loop Count */
+#define DMA1_5_CURR_Y_COUNT 0xFFC01D78	/* DMA1 Channel 5 Current Outer Loop Count */
+#define DMA1_5_IRQ_STATUS 0xFFC01D68	/* DMA1 Channel 5 Interrupt/Status Register */
+#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C	/* DMA1 Channel 5 Peripheral Map Register */
+
+#define DMA1_6_CONFIG 0xFFC01D88	/* DMA1 Channel 6 Configuration register */
+#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80	/* DMA1 Channel 6 Next Descripter Ptr Reg */
+#define DMA1_6_START_ADDR 0xFFC01D84	/* DMA1 Channel 6 Start Address */
+#define DMA1_6_X_COUNT 0xFFC01D90	/* DMA1 Channel 6 Inner Loop Count */
+#define DMA1_6_Y_COUNT 0xFFC01D98	/* DMA1 Channel 6 Outer Loop Count */
+#define DMA1_6_X_MODIFY 0xFFC01D94	/* DMA1 Channel 6 Inner Loop Addr Increment */
+#define DMA1_6_Y_MODIFY 0xFFC01D9C	/* DMA1 Channel 6 Outer Loop Addr Increment */
+#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0	/* DMA1 Channel 6 Current Descriptor Pointer */
+#define DMA1_6_CURR_ADDR 0xFFC01DA4	/* DMA1 Channel 6 Current Address Pointer */
+#define DMA1_6_CURR_X_COUNT 0xFFC01DB0	/* DMA1 Channel 6 Current Inner Loop Count */
+#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8	/* DMA1 Channel 6 Current Outer Loop Count */
+#define DMA1_6_IRQ_STATUS 0xFFC01DA8	/* DMA1 Channel 6 Interrupt/Status Register */
+#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC	/* DMA1 Channel 6 Peripheral Map Register */
+
+#define DMA1_7_CONFIG 0xFFC01DC8	/* DMA1 Channel 7 Configuration register */
+#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0	/* DMA1 Channel 7 Next Descripter Ptr Reg */
+#define DMA1_7_START_ADDR 0xFFC01DC4	/* DMA1 Channel 7 Start Address */
+#define DMA1_7_X_COUNT 0xFFC01DD0	/* DMA1 Channel 7 Inner Loop Count */
+#define DMA1_7_Y_COUNT 0xFFC01DD8	/* DMA1 Channel 7 Outer Loop Count */
+#define DMA1_7_X_MODIFY 0xFFC01DD4	/* DMA1 Channel 7 Inner Loop Addr Increment */
+#define DMA1_7_Y_MODIFY 0xFFC01DDC	/* DMA1 Channel 7 Outer Loop Addr Increment */
+#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0	/* DMA1 Channel 7 Current Descriptor Pointer */
+#define DMA1_7_CURR_ADDR 0xFFC01DE4	/* DMA1 Channel 7 Current Address Pointer */
+#define DMA1_7_CURR_X_COUNT 0xFFC01DF0	/* DMA1 Channel 7 Current Inner Loop Count */
+#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8	/* DMA1 Channel 7 Current Outer Loop Count */
+#define DMA1_7_IRQ_STATUS 0xFFC01DE8	/* DMA1 Channel 7 Interrupt/Status Register */
+#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC	/* DMA1 Channel 7 Peripheral Map Register */
+
+#define DMA1_8_CONFIG 0xFFC01E08	/* DMA1 Channel 8 Configuration register */
+#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00	/* DMA1 Channel 8 Next Descripter Ptr Reg */
+#define DMA1_8_START_ADDR 0xFFC01E04	/* DMA1 Channel 8 Start Address */
+#define DMA1_8_X_COUNT 0xFFC01E10	/* DMA1 Channel 8 Inner Loop Count */
+#define DMA1_8_Y_COUNT 0xFFC01E18	/* DMA1 Channel 8 Outer Loop Count */
+#define DMA1_8_X_MODIFY 0xFFC01E14	/* DMA1 Channel 8 Inner Loop Addr Increment */
+#define DMA1_8_Y_MODIFY 0xFFC01E1C	/* DMA1 Channel 8 Outer Loop Addr Increment */
+#define DMA1_8_CURR_DESC_PTR 0xFFC01E20	/* DMA1 Channel 8 Current Descriptor Pointer */
+#define DMA1_8_CURR_ADDR 0xFFC01E24	/* DMA1 Channel 8 Current Address Pointer */
+#define DMA1_8_CURR_X_COUNT 0xFFC01E30	/* DMA1 Channel 8 Current Inner Loop Count */
+#define DMA1_8_CURR_Y_COUNT 0xFFC01E38	/* DMA1 Channel 8 Current Outer Loop Count */
+#define DMA1_8_IRQ_STATUS 0xFFC01E28	/* DMA1 Channel 8 Interrupt/Status Register */
+#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C	/* DMA1 Channel 8 Peripheral Map Register */
+
+#define DMA1_9_CONFIG 0xFFC01E48	/* DMA1 Channel 9 Configuration register */
+#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40	/* DMA1 Channel 9 Next Descripter Ptr Reg */
+#define DMA1_9_START_ADDR 0xFFC01E44	/* DMA1 Channel 9 Start Address */
+#define DMA1_9_X_COUNT 0xFFC01E50	/* DMA1 Channel 9 Inner Loop Count */
+#define DMA1_9_Y_COUNT 0xFFC01E58	/* DMA1 Channel 9 Outer Loop Count */
+#define DMA1_9_X_MODIFY 0xFFC01E54	/* DMA1 Channel 9 Inner Loop Addr Increment */
+#define DMA1_9_Y_MODIFY 0xFFC01E5C	/* DMA1 Channel 9 Outer Loop Addr Increment */
+#define DMA1_9_CURR_DESC_PTR 0xFFC01E60	/* DMA1 Channel 9 Current Descriptor Pointer */
+#define DMA1_9_CURR_ADDR 0xFFC01E64	/* DMA1 Channel 9 Current Address Pointer */
+#define DMA1_9_CURR_X_COUNT 0xFFC01E70	/* DMA1 Channel 9 Current Inner Loop Count */
+#define DMA1_9_CURR_Y_COUNT 0xFFC01E78	/* DMA1 Channel 9 Current Outer Loop Count */
+#define DMA1_9_IRQ_STATUS 0xFFC01E68	/* DMA1 Channel 9 Interrupt/Status Register */
+#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C	/* DMA1 Channel 9 Peripheral Map Register */
+
+#define DMA1_10_CONFIG 0xFFC01E88	/* DMA1 Channel 10 Configuration register */
+#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80	/* DMA1 Channel 10 Next Descripter Ptr Reg */
+#define DMA1_10_START_ADDR 0xFFC01E84	/* DMA1 Channel 10 Start Address */
+#define DMA1_10_X_COUNT 0xFFC01E90	/* DMA1 Channel 10 Inner Loop Count */
+#define DMA1_10_Y_COUNT 0xFFC01E98	/* DMA1 Channel 10 Outer Loop Count */
+#define DMA1_10_X_MODIFY 0xFFC01E94	/* DMA1 Channel 10 Inner Loop Addr Increment */
+#define DMA1_10_Y_MODIFY 0xFFC01E9C	/* DMA1 Channel 10 Outer Loop Addr Increment */
+#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0	/* DMA1 Channel 10 Current Descriptor Pointer */
+#define DMA1_10_CURR_ADDR 0xFFC01EA4	/* DMA1 Channel 10 Current Address Pointer */
+#define DMA1_10_CURR_X_COUNT 0xFFC01EB0	/* DMA1 Channel 10 Current Inner Loop Count */
+#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8	/* DMA1 Channel 10 Current Outer Loop Count */
+#define DMA1_10_IRQ_STATUS 0xFFC01EA8	/* DMA1 Channel 10 Interrupt/Status Register */
+#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC	/* DMA1 Channel 10 Peripheral Map Register */
+
+#define DMA1_11_CONFIG 0xFFC01EC8	/* DMA1 Channel 11 Configuration register */
+#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0	/* DMA1 Channel 11 Next Descripter Ptr Reg */
+#define DMA1_11_START_ADDR 0xFFC01EC4	/* DMA1 Channel 11 Start Address */
+#define DMA1_11_X_COUNT 0xFFC01ED0	/* DMA1 Channel 11 Inner Loop Count */
+#define DMA1_11_Y_COUNT 0xFFC01ED8	/* DMA1 Channel 11 Outer Loop Count */
+#define DMA1_11_X_MODIFY 0xFFC01ED4	/* DMA1 Channel 11 Inner Loop Addr Increment */
+#define DMA1_11_Y_MODIFY 0xFFC01EDC	/* DMA1 Channel 11 Outer Loop Addr Increment */
+#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0	/* DMA1 Channel 11 Current Descriptor Pointer */
+#define DMA1_11_CURR_ADDR 0xFFC01EE4	/* DMA1 Channel 11 Current Address Pointer */
+#define DMA1_11_CURR_X_COUNT 0xFFC01EF0	/* DMA1 Channel 11 Current Inner Loop Count */
+#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8	/* DMA1 Channel 11 Current Outer Loop Count */
+#define DMA1_11_IRQ_STATUS 0xFFC01EE8	/* DMA1 Channel 11 Interrupt/Status Register */
+#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC	/* DMA1 Channel 11 Peripheral Map Register */
+
+/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
+#define MDMA1_D0_CONFIG 0xFFC01F08	/*MemDMA1 Stream 0 Destination Configuration */
+#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00	/*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA1_D0_START_ADDR 0xFFC01F04	/*MemDMA1 Stream 0 Destination Start Address */
+#define MDMA1_D0_X_COUNT 0xFFC01F10	/*MemDMA1 Stream 0 Destination Inner-Loop Count */
+#define MDMA1_D0_Y_COUNT 0xFFC01F18	/*MemDMA1 Stream 0 Destination Outer-Loop Count */
+#define MDMA1_D0_X_MODIFY 0xFFC01F14	/*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA1_D0_Y_MODIFY 0xFFC01F1C	/*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20	/*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA1_D0_CURR_ADDR 0xFFC01F24	/*MemDMA1 Stream 0 Destination Current Address */
+#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30	/*MemDMA1 Stream 0 Dest Current Inner-Loop Count */
+#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38	/*MemDMA1 Stream 0 Dest Current Outer-Loop Count */
+#define MDMA1_D0_IRQ_STATUS 0xFFC01F28	/*MemDMA1 Stream 0 Destination Interrupt/Status */
+#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C	/*MemDMA1 Stream 0 Destination Peripheral Map */
+
+#define MDMA1_S0_CONFIG 0xFFC01F48	/*MemDMA1 Stream 0 Source Configuration */
+#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40	/*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA1_S0_START_ADDR 0xFFC01F44	/*MemDMA1 Stream 0 Source Start Address */
+#define MDMA1_S0_X_COUNT 0xFFC01F50	/*MemDMA1 Stream 0 Source Inner-Loop Count */
+#define MDMA1_S0_Y_COUNT 0xFFC01F58	/*MemDMA1 Stream 0 Source Outer-Loop Count */
+#define MDMA1_S0_X_MODIFY 0xFFC01F54	/*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
+#define MDMA1_S0_Y_MODIFY 0xFFC01F5C	/*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
+#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60	/*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA1_S0_CURR_ADDR 0xFFC01F64	/*MemDMA1 Stream 0 Source Current Address */
+#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70	/*MemDMA1 Stream 0 Source Current Inner-Loop Count */
+#define MDMA1_S0_CURR_Y_COUNT 0xFFC01F78	/*MemDMA1 Stream 0 Source Current Outer-Loop Count */
+#define MDMA1_S0_IRQ_STATUS 0xFFC01F68	/*MemDMA1 Stream 0 Source Interrupt/Status */
+#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C	/*MemDMA1 Stream 0 Source Peripheral Map */
+
+#define MDMA1_D1_CONFIG 0xFFC01F88	/*MemDMA1 Stream 1 Destination Configuration */
+#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80	/*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA1_D1_START_ADDR 0xFFC01F84	/*MemDMA1 Stream 1 Destination Start Address */
+#define MDMA1_D1_X_COUNT 0xFFC01F90	/*MemDMA1 Stream 1 Destination Inner-Loop Count */
+#define MDMA1_D1_Y_COUNT 0xFFC01F98	/*MemDMA1 Stream 1 Destination Outer-Loop Count */
+#define MDMA1_D1_X_MODIFY 0xFFC01F94	/*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA1_D1_Y_MODIFY 0xFFC01F9C	/*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0	/*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
+#define MDMA1_D1_CURR_ADDR 0xFFC01FA4	/*MemDMA1 Stream 1 Dest Current Address */
+#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0	/*MemDMA1 Stream 1 Dest Current Inner-Loop Count */
+#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8	/*MemDMA1 Stream 1 Dest Current Outer-Loop Count */
+#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8	/*MemDMA1 Stream 1 Dest Interrupt/Status */
+#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC	/*MemDMA1 Stream 1 Dest Peripheral Map */
+
+#define MDMA1_S1_CONFIG 0xFFC01FC8	/*MemDMA1 Stream 1 Source Configuration */
+#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0	/*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA1_S1_START_ADDR 0xFFC01FC4	/*MemDMA1 Stream 1 Source Start Address */
+#define MDMA1_S1_X_COUNT 0xFFC01FD0	/*MemDMA1 Stream 1 Source Inner-Loop Count */
+#define MDMA1_S1_Y_COUNT 0xFFC01FD8	/*MemDMA1 Stream 1 Source Outer-Loop Count */
+#define MDMA1_S1_X_MODIFY 0xFFC01FD4	/*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
+#define MDMA1_S1_Y_MODIFY 0xFFC01FDC	/*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0	/*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA1_S1_CURR_ADDR 0xFFC01FE4	/*MemDMA1 Stream 1 Source Current Address */
+#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0	/*MemDMA1 Stream 1 Source Current Inner-Loop Count */
+#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8	/*MemDMA1 Stream 1 Source Current Outer-Loop Count */
+#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8	/*MemDMA1 Stream 1 Source Interrupt/Status */
+#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC	/*MemDMA1 Stream 1 Source Peripheral Map */
+
+/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
+#define DMA2_0_CONFIG 0xFFC00C08	/* DMA2 Channel 0 Configuration register */
+#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00	/* DMA2 Channel 0 Next Descripter Ptr Reg */
+#define DMA2_0_START_ADDR 0xFFC00C04	/* DMA2 Channel 0 Start Address */
+#define DMA2_0_X_COUNT 0xFFC00C10	/* DMA2 Channel 0 Inner Loop Count */
+#define DMA2_0_Y_COUNT 0xFFC00C18	/* DMA2 Channel 0 Outer Loop Count */
+#define DMA2_0_X_MODIFY 0xFFC00C14	/* DMA2 Channel 0 Inner Loop Addr Increment */
+#define DMA2_0_Y_MODIFY 0xFFC00C1C	/* DMA2 Channel 0 Outer Loop Addr Increment */
+#define DMA2_0_CURR_DESC_PTR 0xFFC00C20	/* DMA2 Channel 0 Current Descriptor Pointer */
+#define DMA2_0_CURR_ADDR 0xFFC00C24	/* DMA2 Channel 0 Current Address Pointer */
+#define DMA2_0_CURR_X_COUNT 0xFFC00C30	/* DMA2 Channel 0 Current Inner Loop Count */
+#define DMA2_0_CURR_Y_COUNT 0xFFC00C38	/* DMA2 Channel 0 Current Outer Loop Count */
+#define DMA2_0_IRQ_STATUS 0xFFC00C28	/* DMA2 Channel 0 Interrupt/Status Register */
+#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C	/* DMA2 Channel 0 Peripheral Map Register */
+
+#define DMA2_1_CONFIG 0xFFC00C48	/* DMA2 Channel 1 Configuration register */
+#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40	/* DMA2 Channel 1 Next Descripter Ptr Reg */
+#define DMA2_1_START_ADDR 0xFFC00C44	/* DMA2 Channel 1 Start Address */
+#define DMA2_1_X_COUNT 0xFFC00C50	/* DMA2 Channel 1 Inner Loop Count */
+#define DMA2_1_Y_COUNT 0xFFC00C58	/* DMA2 Channel 1 Outer Loop Count */
+#define DMA2_1_X_MODIFY 0xFFC00C54	/* DMA2 Channel 1 Inner Loop Addr Increment */
+#define DMA2_1_Y_MODIFY 0xFFC00C5C	/* DMA2 Channel 1 Outer Loop Addr Increment */
+#define DMA2_1_CURR_DESC_PTR 0xFFC00C60	/* DMA2 Channel 1 Current Descriptor Pointer */
+#define DMA2_1_CURR_ADDR 0xFFC00C64	/* DMA2 Channel 1 Current Address Pointer */
+#define DMA2_1_CURR_X_COUNT 0xFFC00C70	/* DMA2 Channel 1 Current Inner Loop Count */
+#define DMA2_1_CURR_Y_COUNT 0xFFC00C78	/* DMA2 Channel 1 Current Outer Loop Count */
+#define DMA2_1_IRQ_STATUS 0xFFC00C68	/* DMA2 Channel 1 Interrupt/Status Register */
+#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C	/* DMA2 Channel 1 Peripheral Map Register */
+
+#define DMA2_2_CONFIG 0xFFC00C88	/* DMA2 Channel 2 Configuration register */
+#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80	/* DMA2 Channel 2 Next Descripter Ptr Reg */
+#define DMA2_2_START_ADDR 0xFFC00C84	/* DMA2 Channel 2 Start Address */
+#define DMA2_2_X_COUNT 0xFFC00C90	/* DMA2 Channel 2 Inner Loop Count */
+#define DMA2_2_Y_COUNT 0xFFC00C98	/* DMA2 Channel 2 Outer Loop Count */
+#define DMA2_2_X_MODIFY 0xFFC00C94	/* DMA2 Channel 2 Inner Loop Addr Increment */
+#define DMA2_2_Y_MODIFY 0xFFC00C9C	/* DMA2 Channel 2 Outer Loop Addr Increment */
+#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0	/* DMA2 Channel 2 Current Descriptor Pointer */
+#define DMA2_2_CURR_ADDR 0xFFC00CA4	/* DMA2 Channel 2 Current Address Pointer */
+#define DMA2_2_CURR_X_COUNT 0xFFC00CB0	/* DMA2 Channel 2 Current Inner Loop Count */
+#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8	/* DMA2 Channel 2 Current Outer Loop Count */
+#define DMA2_2_IRQ_STATUS 0xFFC00CA8	/* DMA2 Channel 2 Interrupt/Status Register */
+#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC	/* DMA2 Channel 2 Peripheral Map Register */
+
+#define DMA2_3_CONFIG 0xFFC00CC8	/* DMA2 Channel 3 Configuration register */
+#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0	/* DMA2 Channel 3 Next Descripter Ptr Reg */
+#define DMA2_3_START_ADDR 0xFFC00CC4	/* DMA2 Channel 3 Start Address */
+#define DMA2_3_X_COUNT 0xFFC00CD0	/* DMA2 Channel 3 Inner Loop Count */
+#define DMA2_3_Y_COUNT 0xFFC00CD8	/* DMA2 Channel 3 Outer Loop Count */
+#define DMA2_3_X_MODIFY 0xFFC00CD4	/* DMA2 Channel 3 Inner Loop Addr Increment */
+#define DMA2_3_Y_MODIFY 0xFFC00CDC	/* DMA2 Channel 3 Outer Loop Addr Increment */
+#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0	/* DMA2 Channel 3 Current Descriptor Pointer */
+#define DMA2_3_CURR_ADDR 0xFFC00CE4	/* DMA2 Channel 3 Current Address Pointer */
+#define DMA2_3_CURR_X_COUNT 0xFFC00CF0	/* DMA2 Channel 3 Current Inner Loop Count */
+#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8	/* DMA2 Channel 3 Current Outer Loop Count */
+#define DMA2_3_IRQ_STATUS 0xFFC00CE8	/* DMA2 Channel 3 Interrupt/Status Register */
+#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC	/* DMA2 Channel 3 Peripheral Map Register */
+
+#define DMA2_4_CONFIG 0xFFC00D08	/* DMA2 Channel 4 Configuration register */
+#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00	/* DMA2 Channel 4 Next Descripter Ptr Reg */
+#define DMA2_4_START_ADDR 0xFFC00D04	/* DMA2 Channel 4 Start Address */
+#define DMA2_4_X_COUNT 0xFFC00D10	/* DMA2 Channel 4 Inner Loop Count */
+#define DMA2_4_Y_COUNT 0xFFC00D18	/* DMA2 Channel 4 Outer Loop Count */
+#define DMA2_4_X_MODIFY 0xFFC00D14	/* DMA2 Channel 4 Inner Loop Addr Increment */
+#define DMA2_4_Y_MODIFY 0xFFC00D1C	/* DMA2 Channel 4 Outer Loop Addr Increment */
+#define DMA2_4_CURR_DESC_PTR 0xFFC00D20	/* DMA2 Channel 4 Current Descriptor Pointer */
+#define DMA2_4_CURR_ADDR 0xFFC00D24	/* DMA2 Channel 4 Current Address Pointer */
+#define DMA2_4_CURR_X_COUNT 0xFFC00D30	/* DMA2 Channel 4 Current Inner Loop Count */
+#define DMA2_4_CURR_Y_COUNT 0xFFC00D38	/* DMA2 Channel 4 Current Outer Loop Count */
+#define DMA2_4_IRQ_STATUS 0xFFC00D28	/* DMA2 Channel 4 Interrupt/Status Register */
+#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C	/* DMA2 Channel 4 Peripheral Map Register */
+
+#define DMA2_5_CONFIG 0xFFC00D48	/* DMA2 Channel 5 Configuration register */
+#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40	/* DMA2 Channel 5 Next Descripter Ptr Reg */
+#define DMA2_5_START_ADDR 0xFFC00D44	/* DMA2 Channel 5 Start Address */
+#define DMA2_5_X_COUNT 0xFFC00D50	/* DMA2 Channel 5 Inner Loop Count */
+#define DMA2_5_Y_COUNT 0xFFC00D58	/* DMA2 Channel 5 Outer Loop Count */
+#define DMA2_5_X_MODIFY 0xFFC00D54	/* DMA2 Channel 5 Inner Loop Addr Increment */
+#define DMA2_5_Y_MODIFY 0xFFC00D5C	/* DMA2 Channel 5 Outer Loop Addr Increment */
+#define DMA2_5_CURR_DESC_PTR 0xFFC00D60	/* DMA2 Channel 5 Current Descriptor Pointer */
+#define DMA2_5_CURR_ADDR 0xFFC00D64	/* DMA2 Channel 5 Current Address Pointer */
+#define DMA2_5_CURR_X_COUNT 0xFFC00D70	/* DMA2 Channel 5 Current Inner Loop Count */
+#define DMA2_5_CURR_Y_COUNT 0xFFC00D78	/* DMA2 Channel 5 Current Outer Loop Count */
+#define DMA2_5_IRQ_STATUS 0xFFC00D68	/* DMA2 Channel 5 Interrupt/Status Register */
+#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C	/* DMA2 Channel 5 Peripheral Map Register */
+
+#define DMA2_6_CONFIG 0xFFC00D88	/* DMA2 Channel 6 Configuration register */
+#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80	/* DMA2 Channel 6 Next Descripter Ptr Reg */
+#define DMA2_6_START_ADDR 0xFFC00D84	/* DMA2 Channel 6 Start Address */
+#define DMA2_6_X_COUNT 0xFFC00D90	/* DMA2 Channel 6 Inner Loop Count */
+#define DMA2_6_Y_COUNT 0xFFC00D98	/* DMA2 Channel 6 Outer Loop Count */
+#define DMA2_6_X_MODIFY 0xFFC00D94	/* DMA2 Channel 6 Inner Loop Addr Increment */
+#define DMA2_6_Y_MODIFY 0xFFC00D9C	/* DMA2 Channel 6 Outer Loop Addr Increment */
+#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0	/* DMA2 Channel 6 Current Descriptor Pointer */
+#define DMA2_6_CURR_ADDR 0xFFC00DA4	/* DMA2 Channel 6 Current Address Pointer */
+#define DMA2_6_CURR_X_COUNT 0xFFC00DB0	/* DMA2 Channel 6 Current Inner Loop Count */
+#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8	/* DMA2 Channel 6 Current Outer Loop Count */
+#define DMA2_6_IRQ_STATUS 0xFFC00DA8	/* DMA2 Channel 6 Interrupt/Status Register */
+#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC	/* DMA2 Channel 6 Peripheral Map Register */
+
+#define DMA2_7_CONFIG 0xFFC00DC8	/* DMA2 Channel 7 Configuration register */
+#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0	/* DMA2 Channel 7 Next Descripter Ptr Reg */
+#define DMA2_7_START_ADDR 0xFFC00DC4	/* DMA2 Channel 7 Start Address */
+#define DMA2_7_X_COUNT 0xFFC00DD0	/* DMA2 Channel 7 Inner Loop Count */
+#define DMA2_7_Y_COUNT 0xFFC00DD8	/* DMA2 Channel 7 Outer Loop Count */
+#define DMA2_7_X_MODIFY 0xFFC00DD4	/* DMA2 Channel 7 Inner Loop Addr Increment */
+#define DMA2_7_Y_MODIFY 0xFFC00DDC	/* DMA2 Channel 7 Outer Loop Addr Increment */
+#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0	/* DMA2 Channel 7 Current Descriptor Pointer */
+#define DMA2_7_CURR_ADDR 0xFFC00DE4	/* DMA2 Channel 7 Current Address Pointer */
+#define DMA2_7_CURR_X_COUNT 0xFFC00DF0	/* DMA2 Channel 7 Current Inner Loop Count */
+#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8	/* DMA2 Channel 7 Current Outer Loop Count */
+#define DMA2_7_IRQ_STATUS 0xFFC00DE8	/* DMA2 Channel 7 Interrupt/Status Register */
+#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC	/* DMA2 Channel 7 Peripheral Map Register */
+
+#define DMA2_8_CONFIG 0xFFC00E08	/* DMA2 Channel 8 Configuration register */
+#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00	/* DMA2 Channel 8 Next Descripter Ptr Reg */
+#define DMA2_8_START_ADDR 0xFFC00E04	/* DMA2 Channel 8 Start Address */
+#define DMA2_8_X_COUNT 0xFFC00E10	/* DMA2 Channel 8 Inner Loop Count */
+#define DMA2_8_Y_COUNT 0xFFC00E18	/* DMA2 Channel 8 Outer Loop Count */
+#define DMA2_8_X_MODIFY 0xFFC00E14	/* DMA2 Channel 8 Inner Loop Addr Increment */
+#define DMA2_8_Y_MODIFY 0xFFC00E1C	/* DMA2 Channel 8 Outer Loop Addr Increment */
+#define DMA2_8_CURR_DESC_PTR 0xFFC00E20	/* DMA2 Channel 8 Current Descriptor Pointer */
+#define DMA2_8_CURR_ADDR 0xFFC00E24	/* DMA2 Channel 8 Current Address Pointer */
+#define DMA2_8_CURR_X_COUNT 0xFFC00E30	/* DMA2 Channel 8 Current Inner Loop Count */
+#define DMA2_8_CURR_Y_COUNT 0xFFC00E38	/* DMA2 Channel 8 Current Outer Loop Count */
+#define DMA2_8_IRQ_STATUS 0xFFC00E28	/* DMA2 Channel 8 Interrupt/Status Register */
+#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C	/* DMA2 Channel 8 Peripheral Map Register */
+
+#define DMA2_9_CONFIG 0xFFC00E48	/* DMA2 Channel 9 Configuration register */
+#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40	/* DMA2 Channel 9 Next Descripter Ptr Reg */
+#define DMA2_9_START_ADDR 0xFFC00E44	/* DMA2 Channel 9 Start Address */
+#define DMA2_9_X_COUNT 0xFFC00E50	/* DMA2 Channel 9 Inner Loop Count */
+#define DMA2_9_Y_COUNT 0xFFC00E58	/* DMA2 Channel 9 Outer Loop Count */
+#define DMA2_9_X_MODIFY 0xFFC00E54	/* DMA2 Channel 9 Inner Loop Addr Increment */
+#define DMA2_9_Y_MODIFY 0xFFC00E5C	/* DMA2 Channel 9 Outer Loop Addr Increment */
+#define DMA2_9_CURR_DESC_PTR 0xFFC00E60	/* DMA2 Channel 9 Current Descriptor Pointer */
+#define DMA2_9_CURR_ADDR 0xFFC00E64	/* DMA2 Channel 9 Current Address Pointer */
+#define DMA2_9_CURR_X_COUNT 0xFFC00E70	/* DMA2 Channel 9 Current Inner Loop Count */
+#define DMA2_9_CURR_Y_COUNT 0xFFC00E78	/* DMA2 Channel 9 Current Outer Loop Count */
+#define DMA2_9_IRQ_STATUS 0xFFC00E68	/* DMA2 Channel 9 Interrupt/Status Register */
+#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C	/* DMA2 Channel 9 Peripheral Map Register */
+
+#define DMA2_10_CONFIG 0xFFC00E88	/* DMA2 Channel 10 Configuration register */
+#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80	/* DMA2 Channel 10 Next Descripter Ptr Reg */
+#define DMA2_10_START_ADDR 0xFFC00E84	/* DMA2 Channel 10 Start Address */
+#define DMA2_10_X_COUNT 0xFFC00E90	/* DMA2 Channel 10 Inner Loop Count */
+#define DMA2_10_Y_COUNT 0xFFC00E98	/* DMA2 Channel 10 Outer Loop Count */
+#define DMA2_10_X_MODIFY 0xFFC00E94	/* DMA2 Channel 10 Inner Loop Addr Increment */
+#define DMA2_10_Y_MODIFY 0xFFC00E9C	/* DMA2 Channel 10 Outer Loop Addr Increment */
+#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0	/* DMA2 Channel 10 Current Descriptor Pointer */
+#define DMA2_10_CURR_ADDR 0xFFC00EA4	/* DMA2 Channel 10 Current Address Pointer */
+#define DMA2_10_CURR_X_COUNT 0xFFC00EB0	/* DMA2 Channel 10 Current Inner Loop Count */
+#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8	/* DMA2 Channel 10 Current Outer Loop Count */
+#define DMA2_10_IRQ_STATUS 0xFFC00EA8	/* DMA2 Channel 10 Interrupt/Status Register */
+#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC	/* DMA2 Channel 10 Peripheral Map Register */
+
+#define DMA2_11_CONFIG 0xFFC00EC8	/* DMA2 Channel 11 Configuration register */
+#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0	/* DMA2 Channel 11 Next Descripter Ptr Reg */
+#define DMA2_11_START_ADDR 0xFFC00EC4	/* DMA2 Channel 11 Start Address */
+#define DMA2_11_X_COUNT 0xFFC00ED0	/* DMA2 Channel 11 Inner Loop Count */
+#define DMA2_11_Y_COUNT 0xFFC00ED8	/* DMA2 Channel 11 Outer Loop Count */
+#define DMA2_11_X_MODIFY 0xFFC00ED4	/* DMA2 Channel 11 Inner Loop Addr Increment */
+#define DMA2_11_Y_MODIFY 0xFFC00EDC	/* DMA2 Channel 11 Outer Loop Addr Increment */
+#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0	/* DMA2 Channel 11 Current Descriptor Pointer */
+#define DMA2_11_CURR_ADDR 0xFFC00EE4	/* DMA2 Channel 11 Current Address Pointer */
+#define DMA2_11_CURR_X_COUNT 0xFFC00EF0	/* DMA2 Channel 11 Current Inner Loop Count */
+#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8	/* DMA2 Channel 11 Current Outer Loop Count */
+#define DMA2_11_IRQ_STATUS 0xFFC00EE8	/* DMA2 Channel 11 Interrupt/Status Register */
+#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC	/* DMA2 Channel 11 Peripheral Map Register */
+
+/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
+#define MDMA2_D0_CONFIG 0xFFC00F08	/*MemDMA2 Stream 0 Destination Configuration register */
+#define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00	/*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */
+#define MDMA2_D0_START_ADDR 0xFFC00F04	/*MemDMA2 Stream 0 Destination Start Address */
+#define MDMA2_D0_X_COUNT 0xFFC00F10	/*MemDMA2 Stream 0 Dest Inner-Loop Count register */
+#define MDMA2_D0_Y_COUNT 0xFFC00F18	/*MemDMA2 Stream 0 Dest Outer-Loop Count register */
+#define MDMA2_D0_X_MODIFY 0xFFC00F14	/*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */
+#define MDMA2_D0_Y_MODIFY 0xFFC00F1C	/*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */
+#define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20	/*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */
+#define MDMA2_D0_CURR_ADDR 0xFFC00F24	/*MemDMA2 Stream 0 Destination Current Address */
+#define MDMA2_D0_CURR_X_COUNT 0xFFC00F30	/*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */
+#define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38	/*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */
+#define MDMA2_D0_IRQ_STATUS 0xFFC00F28	/*MemDMA2 Stream 0 Dest Interrupt/Status Register */
+#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C	/*MemDMA2 Stream 0 Destination Peripheral Map register */
+
+#define MDMA2_S0_CONFIG 0xFFC00F48	/*MemDMA2 Stream 0 Source Configuration register */
+#define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40	/*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */
+#define MDMA2_S0_START_ADDR 0xFFC00F44	/*MemDMA2 Stream 0 Source Start Address */
+#define MDMA2_S0_X_COUNT 0xFFC00F50	/*MemDMA2 Stream 0 Source Inner-Loop Count register */
+#define MDMA2_S0_Y_COUNT 0xFFC00F58	/*MemDMA2 Stream 0 Source Outer-Loop Count register */
+#define MDMA2_S0_X_MODIFY 0xFFC00F54	/*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */
+#define MDMA2_S0_Y_MODIFY 0xFFC00F5C	/*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */
+#define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60	/*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */
+#define MDMA2_S0_CURR_ADDR 0xFFC00F64	/*MemDMA2 Stream 0 Source Current Address */
+#define MDMA2_S0_CURR_X_COUNT 0xFFC00F70	/*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */
+#define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78	/*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */
+#define MDMA2_S0_IRQ_STATUS 0xFFC00F68	/*MemDMA2 Stream 0 Source Interrupt/Status Register */
+#define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C	/*MemDMA2 Stream 0 Source Peripheral Map register */
+
+#define MDMA2_D1_CONFIG 0xFFC00F88	/*MemDMA2 Stream 1 Destination Configuration register */
+#define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80	/*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */
+#define MDMA2_D1_START_ADDR 0xFFC00F84	/*MemDMA2 Stream 1 Destination Start Address */
+#define MDMA2_D1_X_COUNT 0xFFC00F90	/*MemDMA2 Stream 1 Dest Inner-Loop Count register */
+#define MDMA2_D1_Y_COUNT 0xFFC00F98	/*MemDMA2 Stream 1 Dest Outer-Loop Count register */
+#define MDMA2_D1_X_MODIFY 0xFFC00F94	/*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */
+#define MDMA2_D1_Y_MODIFY 0xFFC00F9C	/*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */
+#define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0	/*MemDMA2 Stream 1 Destination Current Descriptor Ptr */
+#define MDMA2_D1_CURR_ADDR 0xFFC00FA4	/*MemDMA2 Stream 1 Destination Current Address reg */
+#define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0	/*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */
+#define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8	/*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */
+#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8	/*MemDMA2 Stream 1 Destination Interrupt/Status Reg */
+#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC	/*MemDMA2 Stream 1 Destination Peripheral Map register */
+
+#define MDMA2_S1_CONFIG 0xFFC00FC8	/*MemDMA2 Stream 1 Source Configuration register */
+#define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0	/*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */
+#define MDMA2_S1_START_ADDR 0xFFC00FC4	/*MemDMA2 Stream 1 Source Start Address */
+#define MDMA2_S1_X_COUNT 0xFFC00FD0	/*MemDMA2 Stream 1 Source Inner-Loop Count register */
+#define MDMA2_S1_Y_COUNT 0xFFC00FD8	/*MemDMA2 Stream 1 Source Outer-Loop Count register */
+#define MDMA2_S1_X_MODIFY 0xFFC00FD4	/*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */
+#define MDMA2_S1_Y_MODIFY 0xFFC00FDC	/*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */
+#define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0	/*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */
+#define MDMA2_S1_CURR_ADDR 0xFFC00FE4	/*MemDMA2 Stream 1 Source Current Address */
+#define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0	/*MemDMA2 Stream 1 Source Current Inner-Loop Count */
+#define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8	/*MemDMA2 Stream 1 Source Current Outer-Loop Count */
+#define MDMA2_S1_IRQ_STATUS 0xFFC00FE8	/*MemDMA2 Stream 1 Source Interrupt/Status Register */
+#define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC	/*MemDMA2 Stream 1 Source Peripheral Map register */
+
+/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
+#define IMDMA_D0_CONFIG 0xFFC01808	/*IMDMA Stream 0 Destination Configuration */
+#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800	/*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */
+#define IMDMA_D0_START_ADDR 0xFFC01804	/*IMDMA Stream 0 Destination Start Address */
+#define IMDMA_D0_X_COUNT 0xFFC01810	/*IMDMA Stream 0 Destination Inner-Loop Count */
+#define IMDMA_D0_Y_COUNT 0xFFC01818	/*IMDMA Stream 0 Destination Outer-Loop Count */
+#define IMDMA_D0_X_MODIFY 0xFFC01814	/*IMDMA Stream 0 Dest Inner-Loop Address-Increment */
+#define IMDMA_D0_Y_MODIFY 0xFFC0181C	/*IMDMA Stream 0 Dest Outer-Loop Address-Increment */
+#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820	/*IMDMA Stream 0 Destination Current Descriptor Ptr */
+#define IMDMA_D0_CURR_ADDR 0xFFC01824	/*IMDMA Stream 0 Destination Current Address */
+#define IMDMA_D0_CURR_X_COUNT 0xFFC01830	/*IMDMA Stream 0 Destination Current Inner-Loop Count */
+#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838	/*IMDMA Stream 0 Destination Current Outer-Loop Count */
+#define IMDMA_D0_IRQ_STATUS 0xFFC01828	/*IMDMA Stream 0 Destination Interrupt/Status */
+
+#define IMDMA_S0_CONFIG 0xFFC01848	/*IMDMA Stream 0 Source Configuration */
+#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840	/*IMDMA Stream 0 Source Next Descriptor Ptr Reg */
+#define IMDMA_S0_START_ADDR 0xFFC01844	/*IMDMA Stream 0 Source Start Address */
+#define IMDMA_S0_X_COUNT 0xFFC01850	/*IMDMA Stream 0 Source Inner-Loop Count */
+#define IMDMA_S0_Y_COUNT 0xFFC01858	/*IMDMA Stream 0 Source Outer-Loop Count */
+#define IMDMA_S0_X_MODIFY 0xFFC01854	/*IMDMA Stream 0 Source Inner-Loop Address-Increment */
+#define IMDMA_S0_Y_MODIFY 0xFFC0185C	/*IMDMA Stream 0 Source Outer-Loop Address-Increment */
+#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860	/*IMDMA Stream 0 Source Current Descriptor Ptr reg */
+#define IMDMA_S0_CURR_ADDR 0xFFC01864	/*IMDMA Stream 0 Source Current Address */
+#define IMDMA_S0_CURR_X_COUNT 0xFFC01870	/*IMDMA Stream 0 Source Current Inner-Loop Count */
+#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878	/*IMDMA Stream 0 Source Current Outer-Loop Count */
+#define IMDMA_S0_IRQ_STATUS 0xFFC01868	/*IMDMA Stream 0 Source Interrupt/Status */
+
+#define IMDMA_D1_CONFIG 0xFFC01888	/*IMDMA Stream 1 Destination Configuration */
+#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880	/*IMDMA Stream 1 Destination Next Descriptor Ptr Reg */
+#define IMDMA_D1_START_ADDR 0xFFC01884	/*IMDMA Stream 1 Destination Start Address */
+#define IMDMA_D1_X_COUNT 0xFFC01890	/*IMDMA Stream 1 Destination Inner-Loop Count */
+#define IMDMA_D1_Y_COUNT 0xFFC01898	/*IMDMA Stream 1 Destination Outer-Loop Count */
+#define IMDMA_D1_X_MODIFY 0xFFC01894	/*IMDMA Stream 1 Dest Inner-Loop Address-Increment */
+#define IMDMA_D1_Y_MODIFY 0xFFC0189C	/*IMDMA Stream 1 Dest Outer-Loop Address-Increment */
+#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0	/*IMDMA Stream 1 Destination Current Descriptor Ptr */
+#define IMDMA_D1_CURR_ADDR 0xFFC018A4	/*IMDMA Stream 1 Destination Current Address */
+#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0	/*IMDMA Stream 1 Destination Current Inner-Loop Count */
+#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8	/*IMDMA Stream 1 Destination Current Outer-Loop Count */
+#define IMDMA_D1_IRQ_STATUS 0xFFC018A8	/*IMDMA Stream 1 Destination Interrupt/Status */
+
+#define IMDMA_S1_CONFIG 0xFFC018C8	/*IMDMA Stream 1 Source Configuration */
+#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0	/*IMDMA Stream 1 Source Next Descriptor Ptr Reg */
+#define IMDMA_S1_START_ADDR 0xFFC018C4	/*IMDMA Stream 1 Source Start Address */
+#define IMDMA_S1_X_COUNT 0xFFC018D0	/*IMDMA Stream 1 Source Inner-Loop Count */
+#define IMDMA_S1_Y_COUNT 0xFFC018D8	/*IMDMA Stream 1 Source Outer-Loop Count */
+#define IMDMA_S1_X_MODIFY 0xFFC018D4	/*IMDMA Stream 1 Source Inner-Loop Address-Increment */
+#define IMDMA_S1_Y_MODIFY 0xFFC018DC	/*IMDMA Stream 1 Source Outer-Loop Address-Increment */
+#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0	/*IMDMA Stream 1 Source Current Descriptor Ptr reg */
+#define IMDMA_S1_CURR_ADDR 0xFFC018E4	/*IMDMA Stream 1 Source Current Address */
+#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0	/*IMDMA Stream 1 Source Current Inner-Loop Count */
+#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8	/*IMDMA Stream 1 Source Current Outer-Loop Count */
+#define IMDMA_S1_IRQ_STATUS 0xFFC018E8	/*IMDMA Stream 1 Source Interrupt/Status */
+
+/*********************************************************************************** */
+/* System MMR Register Bits */
+/******************************************************************************* */
+
+/* ********************* PLL AND RESET MASKS ************************ */
+
+/* PLL_CTL Masks */
+#define PLL_CLKIN              0x00000000	/* Pass CLKIN to PLL */
+#define PLL_CLKIN_DIV2         0x00000001	/* Pass CLKIN/2 to PLL */
+#define PLL_OFF                0x00000002	/* Shut off PLL clocks */
+#define STOPCK_OFF             0x00000008	/* Core clock off */
+#define PDWN                   0x00000020	/* Put the PLL in a Deep Sleep state */
+#define BYPASS                 0x00000100	/* Bypass the PLL */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* VR_CTL Masks																	*/
+#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
+#define	HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation	*/
+#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+
+#define	GAIN			0x000C	/* Voltage Level Gain	*/
+#define	GAIN_5			0x0000	/* GAIN = 5*/
+#define	GAIN_10			0x0004	/* GAIN = 1*/
+#define	GAIN_20			0x0008	/* GAIN = 2*/
+#define	GAIN_50			0x000C	/* GAIN = 5*/
+
+#define	VLEV			0x00F0	/* Internal Voltage Level */
+#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
+#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
+#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
+/* PLL_DIV Masks */
+#define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */
+
+#define CSEL			0x30		/* Core Select */
+#define SSEL			0xf		/* System Select */
+#define CCLK_DIV1              0x00000000	/* CCLK = VCO / 1 */
+#define CCLK_DIV2              0x00000010	/* CCLK = VCO / 2 */
+#define CCLK_DIV4              0x00000020	/* CCLK = VCO / 4 */
+#define CCLK_DIV8              0x00000030	/* CCLK = VCO / 8 */
+
+/* PLL_STAT Masks																	*/
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
+#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
+#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
+
+/* SWRST Mask */
+#define SYSTEM_RESET           0x0007	/* Initiates a system software reset */
+#define DOUBLE_FAULT_A         0x0008	/* Core A Double Fault Causes Reset */
+#define DOUBLE_FAULT_B         0x0010	/* Core B Double Fault Causes Reset */
+#define SWRST_DBL_FAULT_A      0x0800	/* SWRST Core A Double Fault */
+#define SWRST_DBL_FAULT_B      0x1000	/* SWRST Core B Double Fault */
+#define SWRST_WDT_B		       0x2000	/* SWRST Watchdog B */
+#define SWRST_WDT_A		       0x4000	/* SWRST Watchdog A */
+#define SWRST_OCCURRED         0x8000	/* SWRST Status */
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
+
+/* SICu_IARv Masks	 */
+/* u = A or B */
+/* v = 0 to 7 */
+/* w = 0 or 1 */
+
+/* Per_number = 0 to 63 */
+/* IVG_number = 7 to 15   */
+#define Peripheral_IVG(Per_number, IVG_number)    \
+    ((IVG_number) - 7) << (((Per_number) % 8) * 4)	/* Peripheral #Per_number assigned IVG #IVG_number  */
+    /* Usage: r0.l = lo(Peripheral_IVG(62, 10)); */
+    /*        r0.h = hi(Peripheral_IVG(62, 10)); */
+
+/* SICx_IMASKw Masks */
+/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers  */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+/* x = pos 0 to 31, for 32-63 use value-32 */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
+/* ***************************** UART CONTROLLER MASKS ********************** */
+
+/* UART_LCR Register */
+
+#define DLAB	0x80
+#define SB      0x40
+#define STP      0x20
+#define EPS     0x10
+#define PEN	0x08
+#define STB	0x04
+#define WLS(x)	((x-5) & 0x03)
+
+#define DLAB_P	0x07
+#define SB_P	0x06
+#define STP_P	0x05
+#define EPS_P	0x04
+#define PEN_P	0x03
+#define STB_P	0x02
+#define WLS_P1	0x01
+#define WLS_P0	0x00
+
+/* UART_MCR Register */
+#define LOOP_ENA	0x10
+#define LOOP_ENA_P	0x04
+
+/* UART_LSR Register */
+#define TEMT	0x40
+#define THRE	0x20
+#define BI	0x10
+#define FE	0x08
+#define PE	0x04
+#define OE	0x02
+#define DR	0x01
+
+#define TEMP_P	0x06
+#define THRE_P	0x05
+#define BI_P	0x04
+#define FE_P	0x03
+#define PE_P	0x02
+#define OE_P	0x01
+#define DR_P	0x00
+
+/* UART_IER Register */
+#define ELSI	0x04
+#define ETBEI	0x02
+#define ERBFI	0x01
+
+#define ELSI_P	0x02
+#define ETBEI_P	0x01
+#define ERBFI_P	0x00
+
+/* UART_IIR Register */
+#define STATUS(x)	((x << 1) & 0x06)
+#define NINT		0x01
+#define STATUS_P1	0x02
+#define STATUS_P0	0x01
+#define NINT_P		0x00
+#define IIR_TX_READY    0x02	/* UART_THR empty                               */
+#define IIR_RX_READY    0x04	/* Receive data ready                           */
+#define IIR_LINE_CHANGE 0x06	/* Receive line status                          */
+#define IIR_STATUS	0x06
+
+/* UART_GCTL Register */
+#define FFE	0x20
+#define FPE	0x10
+#define RPOLC	0x08
+#define TPOLC	0x04
+#define IREN	0x02
+#define UCEN	0x01
+
+#define FFE_P	0x05
+#define FPE_P	0x04
+#define RPOLC_P	0x03
+#define TPOLC_P	0x02
+#define IREN_P	0x01
+#define UCEN_P	0x00
+
+/* **********  SERIAL PORT MASKS  ********************** */
+
+/* SPORTx_TCR1 Masks */
+#define TSPEN    0x0001		/* TX enable  */
+#define ITCLK    0x0002		/* Internal TX Clock Select  */
+#define TDTYPE   0x000C		/* TX Data Formatting Select */
+#define TLSBIT   0x0010		/* TX Bit Order */
+#define ITFS     0x0200		/* Internal TX Frame Sync Select  */
+#define TFSR     0x0400		/* TX Frame Sync Required Select  */
+#define DITFS    0x0800		/* Data Independent TX Frame Sync Select  */
+#define LTFS     0x1000		/* Low TX Frame Sync Select  */
+#define LATFS    0x2000		/* Late TX Frame Sync Select  */
+#define TCKFE    0x4000		/* TX Clock Falling Edge Select  */
+
+/* SPORTx_TCR2 Masks */
+#define SLEN	    0x001F	/*TX Word Length  */
+#define TXSE        0x0100	/*TX Secondary Enable */
+#define TSFSE       0x0200	/*TX Stereo Frame Sync Enable */
+#define TRFST       0x0400	/*TX Right-First Data Order  */
+
+/* SPORTx_RCR1 Masks */
+#define RSPEN    0x0001		/* RX enable  */
+#define IRCLK    0x0002		/* Internal RX Clock Select  */
+#define RDTYPE   0x000C		/* RX Data Formatting Select */
+#define RULAW    0x0008		/* u-Law enable  */
+#define RALAW    0x000C		/* A-Law enable  */
+#define RLSBIT   0x0010		/* RX Bit Order */
+#define IRFS     0x0200		/* Internal RX Frame Sync Select  */
+#define RFSR     0x0400		/* RX Frame Sync Required Select  */
+#define LRFS     0x1000		/* Low RX Frame Sync Select  */
+#define LARFS    0x2000		/* Late RX Frame Sync Select  */
+#define RCKFE    0x4000		/* RX Clock Falling Edge Select  */
+
+/* SPORTx_RCR2 Masks */
+#define SLEN	    0x001F	/*RX Word Length  */
+#define RXSE        0x0100	/*RX Secondary Enable */
+#define RSFSE       0x0200	/*RX Stereo Frame Sync Enable */
+#define RRFST       0x0400	/*Right-First Data Order  */
+
+/*SPORTx_STAT Masks */
+#define RXNE		0x0001	/*RX FIFO Not Empty Status */
+#define RUVF	    	0x0002	/*RX Underflow Status */
+#define ROVF		0x0004	/*RX Overflow Status */
+#define TXF		0x0008	/*TX FIFO Full Status */
+#define TUVF         	0x0010	/*TX Underflow Status */
+#define TOVF         	0x0020	/*TX Overflow Status */
+#define TXHRE        	0x0040	/*TX Hold Register Empty */
+
+/*SPORTx_MCMC1 Masks */
+#define SP_WSIZE		0x0000F000	/*Multichannel Window Size Field */
+#define SP_WOFF		0x000003FF	/*Multichannel Window Offset Field */
+
+/*SPORTx_MCMC2 Masks */
+#define MCCRM		0x00000003	/*Multichannel Clock Recovery Mode */
+#define MCDTXPE		0x00000004	/*Multichannel DMA Transmit Packing */
+#define MCDRXPE		0x00000008	/*Multichannel DMA Receive Packing */
+#define MCMEN		0x00000010	/*Multichannel Frame Mode Enable */
+#define FSDR		0x00000080	/*Multichannel Frame Sync to Data Relationship */
+#define MFD		0x0000F000	/*Multichannel Frame Delay    */
+
+/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
+
+/*  PPI_CONTROL Masks         */
+#define PORT_EN              0x00000001	/* PPI Port Enable  */
+#define PORT_DIR             0x00000002	/* PPI Port Direction       */
+#define XFR_TYPE             0x0000000C	/* PPI Transfer Type  */
+#define PORT_CFG             0x00000030	/* PPI Port Configuration */
+#define FLD_SEL              0x00000040	/* PPI Active Field Select */
+#define PACK_EN              0x00000080	/* PPI Packing Mode */
+#define DMA32                0x00000100	/* PPI 32-bit DMA Enable */
+#define SKIP_EN              0x00000200	/* PPI Skip Element Enable */
+#define SKIP_EO              0x00000400	/* PPI Skip Even/Odd Elements */
+#define DLENGTH              0x00003800	/* PPI Data Length  */
+#define DLEN_8		     0x0	/* PPI Data Length mask for DLEN=8 */
+#define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
+#define POL                  0x0000C000	/* PPI Signal Polarities       */
+
+/* PPI_STATUS Masks */
+#define FLD	             0x00000400	/* Field Indicator   */
+#define FT_ERR	             0x00000800	/* Frame Track Error */
+#define OVR	             0x00001000	/* FIFO Overflow Error */
+#define UNDR	             0x00002000	/* FIFO Underrun Error */
+#define ERR_DET	      	     0x00004000	/* Error Detected Indicator */
+#define ERR_NCOR	     0x00008000	/* Error Not Corrected Indicator */
+
+/* **********  DMA CONTROLLER MASKS  *********************8 */
+
+/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */
+#define DMAEN	        0x00000001	/* Channel Enable */
+#define WNR	   	0x00000002	/* Channel Direction (W/R*) */
+#define WDSIZE_8	0x00000000	/* Word Size 8 bits */
+#define WDSIZE_16	0x00000004	/* Word Size 16 bits */
+#define WDSIZE_32	0x00000008	/* Word Size 32 bits */
+#define DMA2D	        0x00000010	/* 2D/1D* Mode */
+#define RESTART         0x00000020	/* Restart */
+#define DI_SEL	        0x00000040	/* Data Interrupt Select */
+#define DI_EN	        0x00000080	/* Data Interrupt Enable */
+#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)   */
+#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1                                             */
+#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2                                             */
+#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3                                             */
+#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4                                             */
+#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5                                             */
+#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6                                             */
+#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7                                             */
+#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8                                             */
+#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9                                             */
+#define NDSIZE	        0x00000900	/* Next Descriptor Size */
+#define DMAFLOW	        0x00007000	/* Flow Control */
+#define DMAFLOW_STOP		0x0000	/* Stop Mode */
+#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
+#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
+#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */
+
+#define DMAEN_P	            	0	/* Channel Enable */
+#define WNR_P	            	1	/* Channel Direction (W/R*) */
+#define DMA2D_P	        	4	/* 2D/1D* Mode */
+#define RESTART_P	      	5	/* Restart */
+#define DI_SEL_P	     	6	/* Data Interrupt Select */
+#define DI_EN_P	            	7	/* Data Interrupt Enable */
+
+/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */
+
+#define DMA_DONE		0x00000001	/* DMA Done Indicator */
+#define DMA_ERR	        	0x00000002	/* DMA Error Indicator */
+#define DFETCH	            	0x00000004	/* Descriptor Fetch Indicator */
+#define DMA_RUN	            	0x00000008	/* DMA Running Indicator */
+
+#define DMA_DONE_P	    	0	/* DMA Done Indicator */
+#define DMA_ERR_P     		1	/* DMA Error Indicator */
+#define DFETCH_P     		2	/* Descriptor Fetch Indicator */
+#define DMA_RUN_P     		3	/* DMA Running Indicator */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */
+
+#define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
+#define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */
+#define PCAP8	            0x00000080	/* DMA 8-bit Operation Indicator   */
+#define PCAP16	            0x00000100	/* DMA 16-bit Operation Indicator */
+#define PCAP32	            0x00000200	/* DMA 32-bit Operation Indicator */
+#define PCAPWR	            0x00000400	/* DMA Write Operation Indicator */
+#define PCAPRD	            0x00000800	/* DMA Read Operation Indicator */
+#define PMAP	            0x00007000	/* DMA Peripheral Map Field */
+
+/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */
+
+/* PWM Timer bit definitions */
+
+/* TIMER_ENABLE Register */
+#define TIMEN0	0x0001
+#define TIMEN1	0x0002
+#define TIMEN2	0x0004
+#define TIMEN3	0x0008
+#define TIMEN4	0x0010
+#define TIMEN5	0x0020
+#define TIMEN6	0x0040
+#define TIMEN7	0x0080
+#define TIMEN8	0x0001
+#define TIMEN9	0x0002
+#define TIMEN10	0x0004
+#define TIMEN11	0x0008
+
+#define TIMEN0_P	0x00
+#define TIMEN1_P	0x01
+#define TIMEN2_P	0x02
+#define TIMEN3_P	0x03
+#define TIMEN4_P	0x04
+#define TIMEN5_P	0x05
+#define TIMEN6_P	0x06
+#define TIMEN7_P	0x07
+#define TIMEN8_P	0x00
+#define TIMEN9_P	0x01
+#define TIMEN10_P	0x02
+#define TIMEN11_P	0x03
+
+/* TIMER_DISABLE Register */
+#define TIMDIS0		0x0001
+#define TIMDIS1		0x0002
+#define TIMDIS2		0x0004
+#define TIMDIS3		0x0008
+#define TIMDIS4		0x0010
+#define TIMDIS5		0x0020
+#define TIMDIS6		0x0040
+#define TIMDIS7		0x0080
+#define TIMDIS8		0x0001
+#define TIMDIS9		0x0002
+#define TIMDIS10	0x0004
+#define TIMDIS11	0x0008
+
+#define TIMDIS0_P	0x00
+#define TIMDIS1_P	0x01
+#define TIMDIS2_P	0x02
+#define TIMDIS3_P	0x03
+#define TIMDIS4_P	0x04
+#define TIMDIS5_P	0x05
+#define TIMDIS6_P	0x06
+#define TIMDIS7_P	0x07
+#define TIMDIS8_P	0x00
+#define TIMDIS9_P	0x01
+#define TIMDIS10_P	0x02
+#define TIMDIS11_P	0x03
+
+/* TIMER_STATUS Register */
+#define TIMIL0		0x00000001
+#define TIMIL1		0x00000002
+#define TIMIL2		0x00000004
+#define TIMIL3		0x00000008
+#define TIMIL4		0x00010000
+#define TIMIL5		0x00020000
+#define TIMIL6		0x00040000
+#define TIMIL7		0x00080000
+#define TIMIL8		0x0001
+#define TIMIL9		0x0002
+#define TIMIL10		0x0004
+#define TIMIL11		0x0008
+#define TOVF_ERR0	0x00000010
+#define TOVF_ERR1	0x00000020
+#define TOVF_ERR2	0x00000040
+#define TOVF_ERR3	0x00000080
+#define TOVF_ERR4	0x00100000
+#define TOVF_ERR5	0x00200000
+#define TOVF_ERR6	0x00400000
+#define TOVF_ERR7	0x00800000
+#define TOVF_ERR8	0x0010
+#define TOVF_ERR9	0x0020
+#define TOVF_ERR10	0x0040
+#define TOVF_ERR11	0x0080
+#define TRUN0		0x00001000
+#define TRUN1		0x00002000
+#define TRUN2		0x00004000
+#define TRUN3		0x00008000
+#define TRUN4		0x10000000
+#define TRUN5		0x20000000
+#define TRUN6		0x40000000
+#define TRUN7		0x80000000
+#define TRUN8		0x1000
+#define TRUN9		0x2000
+#define TRUN10		0x4000
+#define TRUN11		0x8000
+
+#define TIMIL0_P	0x00
+#define TIMIL1_P	0x01
+#define TIMIL2_P	0x02
+#define TIMIL3_P	0x03
+#define TIMIL4_P	0x10
+#define TIMIL5_P	0x11
+#define TIMIL6_P	0x12
+#define TIMIL7_P	0x13
+#define TIMIL8_P	0x00
+#define TIMIL9_P	0x01
+#define TIMIL10_P	0x02
+#define TIMIL11_P	0x03
+#define TOVF_ERR0_P	0x04
+#define TOVF_ERR1_P	0x05
+#define TOVF_ERR2_P	0x06
+#define TOVF_ERR3_P	0x07
+#define TOVF_ERR4_P	0x14
+#define TOVF_ERR5_P	0x15
+#define TOVF_ERR6_P	0x16
+#define TOVF_ERR7_P	0x17
+#define TOVF_ERR8_P	0x04
+#define TOVF_ERR9_P	0x05
+#define TOVF_ERR10_P	0x06
+#define TOVF_ERR11_P	0x07
+#define TRUN0_P		0x0C
+#define TRUN1_P		0x0D
+#define TRUN2_P		0x0E
+#define TRUN3_P		0x0F
+#define TRUN4_P		0x1C
+#define TRUN5_P		0x1D
+#define TRUN6_P		0x1E
+#define TRUN7_P		0x1F
+#define TRUN8_P		0x0C
+#define TRUN9_P		0x0D
+#define TRUN10_P	0x0E
+#define TRUN11_P	0x0F
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+#define TOVL_ERR8 TOVF_ERR8
+#define TOVL_ERR9 TOVF_ERR9
+#define TOVL_ERR10 TOVF_ERR10
+#define TOVL_ERR11 TOVF_ERR11
+#define TOVL_ERR0_P TOVF_ERR0_P
+#define TOVL_ERR1_P TOVF_ERR1_P
+#define TOVL_ERR2_P TOVF_ERR2_P
+#define TOVL_ERR3_P TOVF_ERR3_P
+#define TOVL_ERR4_P TOVF_ERR4_P
+#define TOVL_ERR5_P TOVF_ERR5_P
+#define TOVL_ERR6_P TOVF_ERR6_P
+#define TOVL_ERR7_P TOVF_ERR7_P
+#define TOVL_ERR8_P TOVF_ERR8_P
+#define TOVL_ERR9_P TOVF_ERR9_P
+#define TOVL_ERR10_P TOVF_ERR10_P
+#define TOVL_ERR11_P TOVF_ERR11_P
+
+/* TIMERx_CONFIG Registers */
+#define PWM_OUT		0x0001
+#define WDTH_CAP	0x0002
+#define EXT_CLK		0x0003
+#define PULSE_HI	0x0004
+#define PERIOD_CNT	0x0008
+#define IRQ_ENA		0x0010
+#define TIN_SEL		0x0020
+#define OUT_DIS		0x0040
+#define CLK_SEL		0x0080
+#define TOGGLE_HI	0x0100
+#define EMU_RUN		0x0200
+#define ERR_TYP(x)	((x & 0x03) << 14)
+
+#define TMODE_P0		0x00
+#define TMODE_P1		0x01
+#define PULSE_HI_P		0x02
+#define PERIOD_CNT_P		0x03
+#define IRQ_ENA_P		0x04
+#define TIN_SEL_P		0x05
+#define OUT_DIS_P		0x06
+#define CLK_SEL_P		0x07
+#define TOGGLE_HI_P		0x08
+#define EMU_RUN_P		0x09
+#define ERR_TYP_P0		0x0E
+#define ERR_TYP_P1		0x0F
+
+/*/ ******************   PROGRAMMABLE FLAG MASKS  ********************* */
+
+/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
+#define PF0         0x0001
+#define PF1         0x0002
+#define PF2         0x0004
+#define PF3         0x0008
+#define PF4         0x0010
+#define PF5         0x0020
+#define PF6         0x0040
+#define PF7         0x0080
+#define PF8         0x0100
+#define PF9         0x0200
+#define PF10        0x0400
+#define PF11        0x0800
+#define PF12        0x1000
+#define PF13        0x2000
+#define PF14        0x4000
+#define PF15        0x8000
+
+/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  BIT POSITIONS */
+#define PF0_P         0
+#define PF1_P         1
+#define PF2_P         2
+#define PF3_P         3
+#define PF4_P         4
+#define PF5_P         5
+#define PF6_P         6
+#define PF7_P         7
+#define PF8_P         8
+#define PF9_P         9
+#define PF10_P        10
+#define PF11_P        11
+#define PF12_P        12
+#define PF13_P        13
+#define PF14_P        14
+#define PF15_P        15
+
+/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  **************** */
+
+/* SPI_CTL Masks */
+#define TIMOD                  0x00000003	/* Transfer initiation mode and interrupt generation */
+#define SZ                     0x00000004	/* Send Zero (=0) or last (=1) word when TDBR empty. */
+#define GM                     0x00000008	/* When RDBR full, get more (=1) data or discard (=0) incoming Data */
+#define PSSE                   0x00000010	/* Enable (=1) Slave-Select input for Master. */
+#define EMISO                  0x00000020	/* Enable (=1) MISO pin as an output. */
+#define SIZE                   0x00000100	/* Word length (0 => 8 bits, 1 => 16 bits) */
+#define LSBF                   0x00000200	/* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
+#define CPHA                   0x00000400	/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
+#define CPOL                   0x00000800	/* Clock polarity (0 => active-high, 1 => active-low) */
+#define MSTR                   0x00001000	/* Configures SPI as master (=1) or slave (=0) */
+#define WOM                    0x00002000	/* Open drain (=1) data output enable (for MOSI and MISO) */
+#define SPE                    0x00004000	/* SPI module enable (=1), disable (=0) */
+
+/* SPI_FLG Masks */
+#define FLS1                   0x00000002	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2                   0x00000004	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3                   0x00000008	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4                   0x00000010	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5                   0x00000020	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6                   0x00000040	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7                   0x00000080	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1                   0x00000200	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
+#define FLG2                   0x00000400	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3                   0x00000800	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
+#define FLG4                   0x00001000	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
+#define FLG5                   0x00002000	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
+#define FLG6                   0x00004000	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
+#define FLG7                   0x00008000	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_FLG Bit Positions */
+#define FLS1_P                 0x00000001	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
+#define FLS2_P                 0x00000002	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLS3_P                 0x00000003	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
+#define FLS4_P                 0x00000004	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
+#define FLS5_P                 0x00000005	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
+#define FLS6_P                 0x00000006	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
+#define FLS7_P                 0x00000007	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
+#define FLG1_P                 0x00000009	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
+#define FLG2_P                 0x0000000A	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
+#define FLG3_P                 0x0000000B	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
+#define FLG4_P                 0x0000000C	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
+#define FLG5_P                 0x0000000D	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
+#define FLG6_P                 0x0000000E	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
+#define FLG7_P                 0x0000000F	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
+
+/* SPI_STAT Masks */
+#define SPIF                   0x00000001	/* Set (=1) when SPI single-word transfer complete */
+#define MODF                   0x00000002	/* Set (=1) in a master device when some other device tries to become master */
+#define TXE                    0x00000004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
+#define TXS                    0x00000008	/* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
+#define RBSY                   0x00000010	/* Set (=1) when data is received with RDBR full */
+#define RXS                    0x00000020	/* SPI_RDBR Data Buffer Status (0=Empty, 1=Full)  */
+#define TXCOL                  0x00000040	/* When set (=1), corrupt data may have been transmitted  */
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
+
+/* AMGCTL Masks */
+#define AMCKEN			0x0001	/* Enable CLKOUT */
+#define AMBEN_B0		0x0002	/* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1		0x0004	/* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2	0x0006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL		0x0008	/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+#define B0_PEN			0x0010	/* Enable 16-bit packing Bank 0  */
+#define B1_PEN			0x0020	/* Enable 16-bit packing Bank 1  */
+#define B2_PEN			0x0040	/* Enable 16-bit packing Bank 2  */
+#define B3_PEN			0x0080	/* Enable 16-bit packing Bank 3  */
+
+/* AMGCTL Bit Positions */
+#define AMCKEN_P		0x00000000	/* Enable CLKOUT */
+#define AMBEN_P0		0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1		0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
+#define AMBEN_P2		0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+#define B0_PEN_P			0x004	/* Enable 16-bit packing Bank 0  */
+#define B1_PEN_P			0x005	/* Enable 16-bit packing Bank 1  */
+#define B2_PEN_P			0x006	/* Enable 16-bit packing Bank 2  */
+#define B3_PEN_P			0x007	/* Enable 16-bit packing Bank 3  */
+
+/* AMBCTL0 Masks */
+#define B0RDYEN	0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL 0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1	0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2	0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3	0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4	0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1	0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2	0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3	0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4	0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1	0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2	0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3	0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0	0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1			0x00000100	/* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2			0x00000200	/* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3			0x00000300	/* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4			0x00000400	/* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5			0x00000500	/* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6			0x00000600	/* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7			0x00000700	/* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8			0x00000800	/* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9			0x00000900	/* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10		0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11		0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12		0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13		0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14		0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15		0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1			0x00001000	/* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2			0x00002000	/* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3			0x00003000	/* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4			0x00004000	/* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5			0x00005000	/* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6			0x00006000	/* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7			0x00007000	/* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8			0x00008000	/* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9			0x00009000	/* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10		0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11		0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12		0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13		0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14		0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15		0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN			0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL		0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1			0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2			0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3			0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4			0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1			0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2			0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3			0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4			0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1			0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2			0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3			0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0			0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1			0x01000000	/* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2			0x02000000	/* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3			0x03000000	/* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4			0x04000000	/* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5			0x05000000	/* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6			0x06000000	/* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7			0x07000000	/* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8			0x08000000	/* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9			0x09000000	/* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10		0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11		0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12		0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13		0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14		0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15		0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1			0x10000000	/* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2			0x20000000	/* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3			0x30000000	/* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4			0x40000000	/* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5			0x50000000	/* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6			0x60000000	/* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7			0x70000000	/* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8			0x80000000	/* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9			0x90000000	/* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10		0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11		0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12		0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13		0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14		0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15		0xF0000000	/* Bank 1 Write Access Time = 15 cycles */
+
+/* AMBCTL1 Masks */
+#define B2RDYEN			0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL		0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1			0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2			0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3			0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4			0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1			0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2			0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3			0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4			0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1			0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2			0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3			0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0			0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1			0x00000100	/* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2			0x00000200	/* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3			0x00000300	/* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4			0x00000400	/* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5			0x00000500	/* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6			0x00000600	/* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7			0x00000700	/* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8			0x00000800	/* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9			0x00000900	/* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10		0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11		0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12		0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13		0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14		0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15		0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1			0x00001000	/* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2			0x00002000	/* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3			0x00003000	/* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4			0x00004000	/* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5			0x00005000	/* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6			0x00006000	/* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7			0x00007000	/* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8			0x00008000	/* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9			0x00009000	/* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10		0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11		0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12		0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13		0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14		0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15		0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN			0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL		0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1			0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2			0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3			0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4			0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1			0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2			0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3			0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4			0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1			0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2			0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3			0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0			0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1			0x01000000	/* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2			0x02000000	/* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3			0x03000000	/* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4			0x04000000	/* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5			0x05000000	/* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6			0x06000000	/* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7			0x07000000	/* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8			0x08000000	/* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9			0x09000000	/* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10		0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11		0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12		0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13		0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14		0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15		0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1			0x10000000	/* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2			0x20000000	/* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3			0x30000000	/* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4			0x40000000	/* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5			0x50000000	/* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6			0x60000000	/* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7			0x70000000	/* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8			0x80000000	/* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9			0x90000000	/* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10		0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11		0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12		0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13		0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14		0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15		0xF0000000	/* Bank 3 Write Access Time = 15 cycles */
+
+/* **********************  SDRAM CONTROLLER MASKS  *************************** */
+
+/* EBIU_SDGCTL Masks */
+#define SCTLE			0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define CL_2			0x00000008	/* SDRAM CAS latency = 2 cycles */
+#define CL_3			0x0000000C	/* SDRAM CAS latency = 3 cycles */
+#define PFE			0x00000010	/* Enable SDRAM prefetch */
+#define PFP			0x00000020	/* Prefetch has priority over AMC requests */
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle */
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles */
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles */
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles */
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles */
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles */
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles */
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles */
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles */
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles */
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles */
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles */
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles */
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles */
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles */
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle */
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles */
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles */
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles */
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles */
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles */
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles */
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle */
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles */
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles */
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles */
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles */
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles */
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles */
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle */
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles */
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles */
+#define PUPSD			0x00200000	/*Power-up start delay */
+#define PSM			0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS				0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS			0x01000000	/* Start SDRAM self-refresh mode */
+#define EBUFE			0x02000000	/* Enable external buffering timing */
+#define FBBRW			0x04000000	/* Fast back-to-back read write enable */
+#define EMREN			0x10000000	/* Extended mode register enable */
+#define TCSR			0x20000000	/* Temp compensated self refresh value 85 deg C */
+#define CDDBG			0x40000000	/* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EB0_E				0x00000001	/* Enable SDRAM external bank 0 */
+#define EB0_SZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EB0_SZ_32			0x00000002	/* SDRAM external bank size = 32MB */
+#define EB0_SZ_64			0x00000004	/* SDRAM external bank size = 64MB */
+#define EB0_SZ_128			0x00000006	/* SDRAM external bank size = 128MB */
+#define EB0_CAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB0_CAW_9			0x00000010	/* SDRAM external bank column address width = 9 bits */
+#define EB0_CAW_10			0x00000020	/* SDRAM external bank column address width = 9 bits */
+#define EB0_CAW_11			0x00000030	/* SDRAM external bank column address width = 9 bits */
+
+#define EB1_E				0x00000100	/* Enable SDRAM external bank 1 */
+#define EB1__SZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EB1__SZ_32			0x00000200	/* SDRAM external bank size = 32MB */
+#define EB1__SZ_64			0x00000400	/* SDRAM external bank size = 64MB */
+#define EB1__SZ_128			0x00000600	/* SDRAM external bank size = 128MB */
+#define EB1__CAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB1__CAW_9			0x00001000	/* SDRAM external bank column address width = 9 bits */
+#define EB1__CAW_10			0x00002000	/* SDRAM external bank column address width = 9 bits */
+#define EB1__CAW_11			0x00003000	/* SDRAM external bank column address width = 9 bits */
+
+#define EB2__E				0x00010000	/* Enable SDRAM external bank 2 */
+#define EB2__SZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EB2__SZ_32			0x00020000	/* SDRAM external bank size = 32MB */
+#define EB2__SZ_64			0x00040000	/* SDRAM external bank size = 64MB */
+#define EB2__SZ_128			0x00060000	/* SDRAM external bank size = 128MB */
+#define EB2__CAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB2__CAW_9			0x00100000	/* SDRAM external bank column address width = 9 bits */
+#define EB2__CAW_10			0x00200000	/* SDRAM external bank column address width = 9 bits */
+#define EB2__CAW_11			0x00300000	/* SDRAM external bank column address width = 9 bits */
+
+#define EB3__E				0x01000000	/* Enable SDRAM external bank 3 */
+#define EB3__SZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EB3__SZ_32			0x02000000	/* SDRAM external bank size = 32MB */
+#define EB3__SZ_64			0x04000000	/* SDRAM external bank size = 64MB */
+#define EB3__SZ_128			0x06000000	/* SDRAM external bank size = 128MB */
+#define EB3__CAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EB3__CAW_9			0x10000000	/* SDRAM external bank column address width = 9 bits */
+#define EB3__CAW_10			0x20000000	/* SDRAM external bank column address width = 9 bits */
+#define EB3__CAW_11			0x30000000	/* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI			0x00000001	/* SDRAM controller is idle  */
+#define SDSRA			0x00000002	/* SDRAM SDRAM self refresh is active */
+#define SDPUA			0x00000004	/* SDRAM power up active  */
+#define SDRS			0x00000008	/* SDRAM is in reset state */
+#define SDEASE		    0x00000010	/* SDRAM EAB sticky error status - W1C */
+#define BGSTAT			0x00000020	/* Bus granted */
+
+#endif				/* _DEF_BF561_H */
diff --git a/arch/blackfin/mach-bf561/include/mach/dma.h b/arch/blackfin/mach-bf561/include/mach/dma.h
new file mode 100644
index 00000000000..8bc46cd89a0
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/dma.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+*
+*        BF-533/2/1 Specific Declarations
+*
+****************************************************************************/
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_BLACKFIN_DMA_CHANNEL 36
+
+#define CH_PPI0			0
+#define CH_PPI			(CH_PPI0)
+#define CH_PPI1			1
+#define CH_SPORT0_RX		12
+#define CH_SPORT0_TX		13
+#define CH_SPORT1_RX		14
+#define CH_SPORT1_TX		15
+#define CH_SPI			16
+#define CH_UART_RX		17
+#define CH_UART_TX		18
+#define CH_MEM_STREAM0_DEST     24	 /* TX */
+#define CH_MEM_STREAM0_SRC      25	 /* RX */
+#define CH_MEM_STREAM1_DEST     26	 /* TX */
+#define CH_MEM_STREAM1_SRC      27	 /* RX */
+#define CH_MEM_STREAM2_DEST	28
+#define CH_MEM_STREAM2_SRC	29
+#define CH_MEM_STREAM3_DEST	30
+#define CH_MEM_STREAM3_SRC	31
+#define CH_IMEM_STREAM0_DEST	32
+#define CH_IMEM_STREAM0_SRC	33
+#define CH_IMEM_STREAM1_DEST	34
+#define CH_IMEM_STREAM1_SRC	35
+
+#endif
diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
new file mode 100644
index 00000000000..6698389c556
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/irq.h
@@ -0,0 +1,447 @@
+
+/*
+ * File:         include/asm-blackfin/mach-bf561/irq.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _BF561_IRQ_H_
+#define _BF561_IRQ_H_
+
+/***********************************************************************
+ * Interrupt source definitions:
+             Event Source		Core Event Name	    IRQ No
+						(highest priority)
+	    Emulation Events			EMU         0
+            Reset				RST         1
+            NMI					NMI         2
+            Exception				EVX         3
+            Reserved				--          4
+            Hardware Error			IVHW        5
+            Core Timer				IVTMR       6 *
+
+	    PLL Wakeup Interrupt		IVG7	    7
+	    DMA1 Error (generic)		IVG7	    8
+	    DMA2 Error (generic)		IVG7	    9
+	    IMDMA Error (generic)		IVG7	    10
+	    PPI1 Error Interrupt		IVG7	    11
+	    PPI2 Error Interrupt		IVG7	    12
+	    SPORT0 Error Interrupt		IVG7	    13
+	    SPORT1 Error Interrupt		IVG7	    14
+	    SPI Error Interrupt			IVG7	    15
+	    UART Error Interrupt		IVG7	    16
+	    Reserved Interrupt			IVG7        17
+
+	    DMA1 0  Interrupt(PPI1)	        IVG8	    18
+	    DMA1 1  Interrupt(PPI2)             IVG8	    19
+	    DMA1 2  Interrupt	                IVG8	    20
+	    DMA1 3  Interrupt	                IVG8	    21
+	    DMA1 4  Interrupt	                IVG8	    22
+	    DMA1 5  Interrupt	                IVG8	    23
+	    DMA1 6  Interrupt	                IVG8	    24
+	    DMA1 7  Interrupt	                IVG8	    25
+	    DMA1 8  Interrupt	                IVG8	    26
+	    DMA1 9  Interrupt	                IVG8	    27
+	    DMA1 10 Interrupt	                IVG8	    28
+	    DMA1 11 Interrupt	                IVG8	    29
+
+	    DMA2 0  (SPORT0 RX)		        IVG9	    30
+	    DMA2 1  (SPORT0 TX)	                IVG9	    31
+	    DMA2 2  (SPORT1 RX)	                IVG9	    32
+	    DMA2 3  (SPORT2 TX)	                IVG9	    33
+	    DMA2 4  (SPI)	                IVG9	    34
+	    DMA2 5  (UART RX)	                IVG9	    35
+	    DMA2 6  (UART TX)	                IVG9	    36
+	    DMA2 7  Interrupt	                IVG9	    37
+	    DMA2 8  Interrupt	                IVG9	    38
+	    DMA2 9  Interrupt	                IVG9	    39
+	    DMA2 10 Interrupt	                IVG9	    40
+	    DMA2 11 Interrupt	                IVG9	    41
+
+	    TIMER 0  Interrupt		        IVG10	    42
+	    TIMER 1  Interrupt	                IVG10	    43
+	    TIMER 2  Interrupt	                IVG10	    44
+	    TIMER 3  Interrupt	                IVG10	    45
+	    TIMER 4  Interrupt	                IVG10	    46
+	    TIMER 5  Interrupt	                IVG10	    47
+	    TIMER 6  Interrupt	                IVG10	    48
+	    TIMER 7  Interrupt	                IVG10	    49
+	    TIMER 8  Interrupt	                IVG10	    50
+	    TIMER 9  Interrupt	                IVG10	    51
+	    TIMER 10 Interrupt	                IVG10	    52
+	    TIMER 11 Interrupt	                IVG10	    53
+
+	    Programmable Flags0 A (8)	        IVG11	    54
+	    Programmable Flags0 B (8)           IVG11	    55
+	    Programmable Flags1 A (8)           IVG11	    56
+	    Programmable Flags1 B (8)           IVG11	    57
+	    Programmable Flags2 A (8)           IVG11	    58
+	    Programmable Flags2 B (8)           IVG11	    59
+
+	    MDMA1 0 write/read INT		IVG8	    60
+	    MDMA1 1 write/read INT		IVG8	    61
+
+	    MDMA2 0 write/read INT		IVG9	    62
+	    MDMA2 1 write/read INT		IVG9	    63
+
+	    IMDMA 0 write/read INT		IVG12	    64
+	    IMDMA 1 write/read INT		IVG12	    65
+
+	    Watch Dog Timer			IVG13	    66
+
+	    Reserved interrupt			IVG7	    67
+	    Reserved interrupt			IVG7	    68
+	    Supplemental interrupt 0		IVG7	    69
+	    supplemental interrupt 1		IVG7	    70
+
+            Softirq		    		IVG14
+            System Call    --
+                 (lowest priority)  		IVG15
+
+ **********************************************************************/
+
+#define SYS_IRQS		71
+#define NR_PERI_INTS		64
+
+/*
+ * The ABSTRACT IRQ definitions
+ *  the first seven of the following are fixed,
+ *  the rest you change if you need to.
+ */
+/* IVG 0-6*/
+#define	IRQ_EMU			0	/* Emulation                */
+#define	IRQ_RST			1	/* Reset                    */
+#define	IRQ_NMI			2	/* Non Maskable Interrupt   */
+#define	IRQ_EVX			3	/* Exception                */
+#define	IRQ_UNUSED		4	/* Reserved interrupt       */
+#define	IRQ_HWERR		5	/* Hardware Error           */
+#define	IRQ_CORETMR		6	/* Core timer               */
+
+#define IVG_BASE		7
+/* IVG 7  */
+#define	IRQ_PLL_WAKEUP		(IVG_BASE + 0)	/* PLL Wakeup Interrupt     */
+#define	IRQ_DMA1_ERROR		(IVG_BASE + 1)	/* DMA1   Error (general)   */
+#define	IRQ_DMA_ERROR		IRQ_DMA1_ERROR	/* DMA1   Error (general)   */
+#define	IRQ_DMA2_ERROR		(IVG_BASE + 2)	/* DMA2   Error (general)   */
+#define IRQ_IMDMA_ERROR		(IVG_BASE + 3)	/* IMDMA  Error Interrupt   */
+#define	IRQ_PPI1_ERROR		(IVG_BASE + 4)	/* PPI1   Error Interrupt   */
+#define	IRQ_PPI_ERROR		IRQ_PPI1_ERROR	/* PPI1   Error Interrupt   */
+#define	IRQ_PPI2_ERROR		(IVG_BASE + 5)	/* PPI2   Error Interrupt   */
+#define	IRQ_SPORT0_ERROR	(IVG_BASE + 6)	/* SPORT0 Error Interrupt   */
+#define	IRQ_SPORT1_ERROR	(IVG_BASE + 7)	/* SPORT1 Error Interrupt   */
+#define	IRQ_SPI_ERROR		(IVG_BASE + 8)	/* SPI    Error Interrupt   */
+#define	IRQ_UART_ERROR		(IVG_BASE + 9)	/* UART   Error Interrupt   */
+#define IRQ_RESERVED_ERROR	(IVG_BASE + 10)	/* Reversed     Interrupt   */
+/* IVG 8  */
+#define	IRQ_DMA1_0		(IVG_BASE + 11)	/* DMA1 0  Interrupt(PPI1)  */
+#define	IRQ_PPI			IRQ_DMA1_0	/* DMA1 0  Interrupt(PPI1)  */
+#define	IRQ_PPI0		IRQ_DMA1_0	/* DMA1 0  Interrupt(PPI1)  */
+#define	IRQ_DMA1_1		(IVG_BASE + 12)	/* DMA1 1  Interrupt(PPI2)  */
+#define	IRQ_PPI1		IRQ_DMA1_1	/* DMA1 1  Interrupt(PPI2)  */
+#define	IRQ_DMA1_2		(IVG_BASE + 13)	/* DMA1 2  Interrupt        */
+#define	IRQ_DMA1_3		(IVG_BASE + 14)	/* DMA1 3  Interrupt        */
+#define	IRQ_DMA1_4		(IVG_BASE + 15)	/* DMA1 4  Interrupt        */
+#define	IRQ_DMA1_5		(IVG_BASE + 16)	/* DMA1 5  Interrupt        */
+#define	IRQ_DMA1_6		(IVG_BASE + 17)	/* DMA1 6  Interrupt        */
+#define	IRQ_DMA1_7		(IVG_BASE + 18)	/* DMA1 7  Interrupt        */
+#define	IRQ_DMA1_8		(IVG_BASE + 19)	/* DMA1 8  Interrupt        */
+#define	IRQ_DMA1_9		(IVG_BASE + 20)	/* DMA1 9  Interrupt        */
+#define	IRQ_DMA1_10		(IVG_BASE + 21)	/* DMA1 10 Interrupt        */
+#define	IRQ_DMA1_11		(IVG_BASE + 22)	/* DMA1 11 Interrupt        */
+/* IVG 9  */
+#define	IRQ_DMA2_0		(IVG_BASE + 23)	/* DMA2 0  (SPORT0 RX)      */
+#define	IRQ_SPORT0_RX		IRQ_DMA2_0	/* DMA2 0  (SPORT0 RX)      */
+#define	IRQ_DMA2_1		(IVG_BASE + 24)	/* DMA2 1  (SPORT0 TX)      */
+#define	IRQ_SPORT0_TX		IRQ_DMA2_1	/* DMA2 1  (SPORT0 TX)      */
+#define	IRQ_DMA2_2		(IVG_BASE + 25)	/* DMA2 2  (SPORT1 RX)      */
+#define	IRQ_SPORT1_RX		IRQ_DMA2_2	/* DMA2 2  (SPORT1 RX)      */
+#define	IRQ_DMA2_3		(IVG_BASE + 26)	/* DMA2 3  (SPORT2 TX)      */
+#define	IRQ_SPORT1_TX		IRQ_DMA2_3	/* DMA2 3  (SPORT2 TX)      */
+#define	IRQ_DMA2_4		(IVG_BASE + 27)	/* DMA2 4  (SPI)            */
+#define	IRQ_SPI			IRQ_DMA2_4	/* DMA2 4  (SPI)            */
+#define	IRQ_DMA2_5		(IVG_BASE + 28)	/* DMA2 5  (UART RX)        */
+#define	IRQ_UART_RX		IRQ_DMA2_5	/* DMA2 5  (UART RX)        */
+#define	IRQ_DMA2_6		(IVG_BASE + 29)	/* DMA2 6  (UART TX)        */
+#define	IRQ_UART_TX		IRQ_DMA2_6	/* DMA2 6  (UART TX)        */
+#define	IRQ_DMA2_7		(IVG_BASE + 30)	/* DMA2 7  Interrupt        */
+#define	IRQ_DMA2_8		(IVG_BASE + 31)	/* DMA2 8  Interrupt        */
+#define	IRQ_DMA2_9		(IVG_BASE + 32)	/* DMA2 9  Interrupt        */
+#define	IRQ_DMA2_10		(IVG_BASE + 33)	/* DMA2 10 Interrupt        */
+#define	IRQ_DMA2_11		(IVG_BASE + 34)	/* DMA2 11 Interrupt        */
+/* IVG 10 */
+#define IRQ_TIMER0		(IVG_BASE + 35)	/* TIMER 0  Interrupt       */
+#define IRQ_TIMER1		(IVG_BASE + 36)	/* TIMER 1  Interrupt       */
+#define IRQ_TIMER2		(IVG_BASE + 37)	/* TIMER 2  Interrupt       */
+#define IRQ_TIMER3		(IVG_BASE + 38)	/* TIMER 3  Interrupt       */
+#define IRQ_TIMER4		(IVG_BASE + 39)	/* TIMER 4  Interrupt       */
+#define IRQ_TIMER5		(IVG_BASE + 40)	/* TIMER 5  Interrupt       */
+#define IRQ_TIMER6		(IVG_BASE + 41)	/* TIMER 6  Interrupt       */
+#define IRQ_TIMER7		(IVG_BASE + 42)	/* TIMER 7  Interrupt       */
+#define IRQ_TIMER8		(IVG_BASE + 43)	/* TIMER 8  Interrupt       */
+#define IRQ_TIMER9		(IVG_BASE + 44)	/* TIMER 9  Interrupt       */
+#define IRQ_TIMER10		(IVG_BASE + 45)	/* TIMER 10 Interrupt       */
+#define IRQ_TIMER11		(IVG_BASE + 46)	/* TIMER 11 Interrupt       */
+/* IVG 11 */
+#define	IRQ_PROG0_INTA		(IVG_BASE + 47)	/* Programmable Flags0 A (8) */
+#define	IRQ_PROG_INTA		IRQ_PROG0_INTA	/* Programmable Flags0 A (8) */
+#define	IRQ_PROG0_INTB		(IVG_BASE + 48)	/* Programmable Flags0 B (8) */
+#define	IRQ_PROG_INTB		IRQ_PROG0_INTB	/* Programmable Flags0 B (8) */
+#define	IRQ_PROG1_INTA		(IVG_BASE + 49)	/* Programmable Flags1 A (8) */
+#define	IRQ_PROG1_INTB		(IVG_BASE + 50)	/* Programmable Flags1 B (8) */
+#define	IRQ_PROG2_INTA		(IVG_BASE + 51)	/* Programmable Flags2 A (8) */
+#define	IRQ_PROG2_INTB		(IVG_BASE + 52)	/* Programmable Flags2 B (8) */
+/* IVG 8  */
+#define IRQ_DMA1_WRRD0		(IVG_BASE + 53)	/* MDMA1 0 write/read INT   */
+#define IRQ_DMA_WRRD0		IRQ_DMA1_WRRD0	/* MDMA1 0 write/read INT   */
+#define IRQ_MEM_DMA0		IRQ_DMA1_WRRD0
+#define IRQ_DMA1_WRRD1		(IVG_BASE + 54)	/* MDMA1 1 write/read INT   */
+#define IRQ_DMA_WRRD1		IRQ_DMA1_WRRD1	/* MDMA1 1 write/read INT   */
+#define IRQ_MEM_DMA1		IRQ_DMA1_WRRD1
+/* IVG 9  */
+#define IRQ_DMA2_WRRD0		(IVG_BASE + 55)	/* MDMA2 0 write/read INT   */
+#define IRQ_MEM_DMA2		IRQ_DMA2_WRRD0
+#define IRQ_DMA2_WRRD1		(IVG_BASE + 56)	/* MDMA2 1 write/read INT   */
+#define IRQ_MEM_DMA3		IRQ_DMA2_WRRD1
+/* IVG 12 */
+#define IRQ_IMDMA_WRRD0		(IVG_BASE + 57)	/* IMDMA 0 write/read INT   */
+#define IRQ_IMEM_DMA0		IRQ_IMDMA_WRRD0
+#define IRQ_IMDMA_WRRD1		(IVG_BASE + 58)	/* IMDMA 1 write/read INT   */
+#define IRQ_IMEM_DMA1		IRQ_IMDMA_WRRD1
+/* IVG 13 */
+#define	IRQ_WATCH	   	(IVG_BASE + 59)	/* Watch Dog Timer          */
+/* IVG 7  */
+#define IRQ_RESERVED_1		(IVG_BASE + 60)	/* Reserved interrupt       */
+#define IRQ_RESERVED_2		(IVG_BASE + 61)	/* Reserved interrupt       */
+#define IRQ_SUPPLE_0		(IVG_BASE + 62)	/* Supplemental interrupt 0 */
+#define IRQ_SUPPLE_1		(IVG_BASE + 63)	/* supplemental interrupt 1 */
+
+#define IRQ_PF0			73
+#define IRQ_PF1			74
+#define IRQ_PF2			75
+#define IRQ_PF3			76
+#define IRQ_PF4			77
+#define IRQ_PF5			78
+#define IRQ_PF6			79
+#define IRQ_PF7			80
+#define IRQ_PF8			81
+#define IRQ_PF9			82
+#define IRQ_PF10		83
+#define IRQ_PF11		84
+#define IRQ_PF12		85
+#define IRQ_PF13		86
+#define IRQ_PF14		87
+#define IRQ_PF15		88
+#define IRQ_PF16		89
+#define IRQ_PF17		90
+#define IRQ_PF18		91
+#define IRQ_PF19		92
+#define IRQ_PF20		93
+#define IRQ_PF21		94
+#define IRQ_PF22		95
+#define IRQ_PF23		96
+#define IRQ_PF24		97
+#define IRQ_PF25		98
+#define IRQ_PF26		99
+#define IRQ_PF27		100
+#define IRQ_PF28		101
+#define IRQ_PF29		102
+#define IRQ_PF30		103
+#define IRQ_PF31		104
+#define IRQ_PF32		105
+#define IRQ_PF33		106
+#define IRQ_PF34		107
+#define IRQ_PF35		108
+#define IRQ_PF36		109
+#define IRQ_PF37		110
+#define IRQ_PF38		111
+#define IRQ_PF39		112
+#define IRQ_PF40		113
+#define IRQ_PF41		114
+#define IRQ_PF42		115
+#define IRQ_PF43		116
+#define IRQ_PF44		117
+#define IRQ_PF45		118
+#define IRQ_PF46		119
+#define IRQ_PF47		120
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define NR_IRQS			(IRQ_PF47 + 1)
+
+#define IVG7			7
+#define IVG8			8
+#define IVG9			9
+#define IVG10			10
+#define IVG11			11
+#define IVG12			12
+#define IVG13			13
+#define IVG14			14
+#define IVG15			15
+
+/*
+ * DEFAULT PRIORITIES:
+ */
+
+#define	CONFIG_DEF_PLL_WAKEUP		7
+#define	CONFIG_DEF_DMA1_ERROR		7
+#define	CONFIG_DEF_DMA2_ERROR		7
+#define CONFIG_DEF_IMDMA_ERROR		7
+#define	CONFIG_DEF_PPI1_ERROR		7
+#define	CONFIG_DEF_PPI2_ERROR		7
+#define	CONFIG_DEF_SPORT0_ERROR		7
+#define	CONFIG_DEF_SPORT1_ERROR		7
+#define	CONFIG_DEF_SPI_ERROR		7
+#define	CONFIG_DEF_UART_ERROR		7
+#define CONFIG_DEF_RESERVED_ERROR	7
+#define	CONFIG_DEF_DMA1_0		8
+#define	CONFIG_DEF_DMA1_1		8
+#define	CONFIG_DEF_DMA1_2		8
+#define	CONFIG_DEF_DMA1_3		8
+#define	CONFIG_DEF_DMA1_4		8
+#define	CONFIG_DEF_DMA1_5		8
+#define	CONFIG_DEF_DMA1_6		8
+#define	CONFIG_DEF_DMA1_7		8
+#define	CONFIG_DEF_DMA1_8		8
+#define	CONFIG_DEF_DMA1_9		8
+#define	CONFIG_DEF_DMA1_10		8
+#define	CONFIG_DEF_DMA1_11		8
+#define	CONFIG_DEF_DMA2_0		9
+#define	CONFIG_DEF_DMA2_1		9
+#define	CONFIG_DEF_DMA2_2		9
+#define	CONFIG_DEF_DMA2_3		9
+#define	CONFIG_DEF_DMA2_4		9
+#define	CONFIG_DEF_DMA2_5		9
+#define	CONFIG_DEF_DMA2_6		9
+#define	CONFIG_DEF_DMA2_7		9
+#define	CONFIG_DEF_DMA2_8		9
+#define	CONFIG_DEF_DMA2_9		9
+#define	CONFIG_DEF_DMA2_10		9
+#define	CONFIG_DEF_DMA2_11		9
+#define CONFIG_DEF_TIMER0		10
+#define CONFIG_DEF_TIMER1		10
+#define CONFIG_DEF_TIMER2		10
+#define CONFIG_DEF_TIMER3		10
+#define CONFIG_DEF_TIMER4		10
+#define CONFIG_DEF_TIMER5		10
+#define CONFIG_DEF_TIMER6		10
+#define CONFIG_DEF_TIMER7		10
+#define CONFIG_DEF_TIMER8		10
+#define CONFIG_DEF_TIMER9		10
+#define CONFIG_DEF_TIMER10		10
+#define CONFIG_DEF_TIMER11		10
+#define	CONFIG_DEF_PROG0_INTA		11
+#define	CONFIG_DEF_PROG0_INTB		11
+#define	CONFIG_DEF_PROG1_INTA		11
+#define	CONFIG_DEF_PROG1_INTB		11
+#define	CONFIG_DEF_PROG2_INTA		11
+#define	CONFIG_DEF_PROG2_INTB		11
+#define CONFIG_DEF_DMA1_WRRD0		8
+#define CONFIG_DEF_DMA1_WRRD1		8
+#define CONFIG_DEF_DMA2_WRRD0		9
+#define CONFIG_DEF_DMA2_WRRD1		9
+#define CONFIG_DEF_IMDMA_WRRD0		12
+#define CONFIG_DEF_IMDMA_WRRD1		12
+#define	CONFIG_DEF_WATCH	   	13
+#define CONFIG_DEF_RESERVED_1		7
+#define CONFIG_DEF_RESERVED_2		7
+#define CONFIG_DEF_SUPPLE_0		7
+#define CONFIG_DEF_SUPPLE_1		7
+
+/* IAR0 BIT FIELDS */
+#define	IRQ_PLL_WAKEUP_POS			0
+#define	IRQ_DMA1_ERROR_POS			4
+#define	IRQ_DMA2_ERROR_POS			8
+#define IRQ_IMDMA_ERROR_POS			12
+#define	IRQ_PPI0_ERROR_POS			16
+#define	IRQ_PPI1_ERROR_POS			20
+#define	IRQ_SPORT0_ERROR_POS		24
+#define	IRQ_SPORT1_ERROR_POS		28
+/* IAR1 BIT FIELDS */
+#define	IRQ_SPI_ERROR_POS			0
+#define	IRQ_UART_ERROR_POS			4
+#define IRQ_RESERVED_ERROR_POS		8
+#define	IRQ_DMA1_0_POS			12
+#define	IRQ_DMA1_1_POS			16
+#define IRQ_DMA1_2_POS			20
+#define IRQ_DMA1_3_POS			24
+#define IRQ_DMA1_4_POS			28
+/* IAR2 BIT FIELDS */
+#define IRQ_DMA1_5_POS			0
+#define IRQ_DMA1_6_POS			4
+#define IRQ_DMA1_7_POS			8
+#define IRQ_DMA1_8_POS			12
+#define IRQ_DMA1_9_POS			16
+#define IRQ_DMA1_10_POS			20
+#define IRQ_DMA1_11_POS			24
+#define IRQ_DMA2_0_POS			28
+/* IAR3 BIT FIELDS */
+#define IRQ_DMA2_1_POS			0
+#define IRQ_DMA2_2_POS			4
+#define IRQ_DMA2_3_POS			8
+#define IRQ_DMA2_4_POS			12
+#define IRQ_DMA2_5_POS			16
+#define IRQ_DMA2_6_POS			20
+#define IRQ_DMA2_7_POS			24
+#define IRQ_DMA2_8_POS			28
+/* IAR4 BIT FIELDS */
+#define IRQ_DMA2_9_POS			0
+#define IRQ_DMA2_10_POS			4
+#define IRQ_DMA2_11_POS			8
+#define IRQ_TIMER0_POS			12
+#define IRQ_TIMER1_POS			16
+#define IRQ_TIMER2_POS			20
+#define IRQ_TIMER3_POS			24
+#define IRQ_TIMER4_POS			28
+/* IAR5 BIT FIELDS */
+#define IRQ_TIMER5_POS			0
+#define IRQ_TIMER6_POS			4
+#define IRQ_TIMER7_POS			8
+#define IRQ_TIMER8_POS			12
+#define IRQ_TIMER9_POS			16
+#define IRQ_TIMER10_POS			20
+#define IRQ_TIMER11_POS			24
+#define IRQ_PROG0_INTA_POS			28
+/* IAR6 BIT FIELDS */
+#define IRQ_PROG0_INTB_POS			0
+#define IRQ_PROG1_INTA_POS			4
+#define IRQ_PROG1_INTB_POS			8
+#define IRQ_PROG2_INTA_POS			12
+#define IRQ_PROG2_INTB_POS			16
+#define IRQ_DMA1_WRRD0_POS			20
+#define IRQ_DMA1_WRRD1_POS			24
+#define IRQ_DMA2_WRRD0_POS			28
+/* IAR7 BIT FIELDS */
+#define IRQ_DMA2_WRRD1_POS			0
+#define IRQ_IMDMA_WRRD0_POS			4
+#define IRQ_IMDMA_WRRD1_POS			8
+#define	IRQ_WDTIMER_POS			12
+#define IRQ_RESERVED_1_POS			16
+#define IRQ_RESERVED_2_POS			20
+#define IRQ_SUPPLE_0_POS			24
+#define IRQ_SUPPLE_1_POS			28
+
+#endif				/* _BF561_IRQ_H_ */
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_init.h b/arch/blackfin/mach-bf561/include/mach/mem_init.h
new file mode 100644
index 00000000000..e163260bca1
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/mem_init.h
@@ -0,0 +1,295 @@
+/*
+ * File:         include/asm-blackfin/mach-bf561/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC8M32B2B5_7)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_7
+#define SDRAM_tRAS_num  7
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_6
+#define SDRAM_tRAS_num  6
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_5
+#define SDRAM_tRAS_num  5
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  4
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP       TRP_2
+#define SDRAM_tRP_num   2
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_2
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_4
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_3
+#define SDRAM_tRAS_num  3
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_2
+#define SDRAM_tRAS_num  2
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP       TRP_1
+#define SDRAM_tRP_num   1
+#define SDRAM_tRAS      TRAS_1
+#define SDRAM_tRAS_num  1
+#define SDRAM_tRCD      TRCD_1
+#define SDRAM_tWR       TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC8M32B2B5_7)
+  /*SDRAM INFORMATION: */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+  /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
+#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
+#define SDRAM_CL    CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF       1
+#else
+#define CLKIN_HALF       0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS      1
+#else
+#define PLL_BYPASS       0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT   B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT   B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST   B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST   B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT   B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT   B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0  \
+	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
new file mode 100644
index 00000000000..c26d8486cc4
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -0,0 +1,78 @@
+/*
+ * Memory MAP
+ * Common header file for blackfin BF561 of processors.
+ */
+
+#ifndef _MEM_MAP_561_H_
+#define _MEM_MAP_561_H_
+
+#define COREMMR_BASE           0xFFE00000	 /* Core MMRs */
+#define SYSMMR_BASE            0xFFC00000	 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x2C000000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK2_BASE	0x28000000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK1_BASE	0x24000000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x04000000	/* 64M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x04000000	/* 64M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x800
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+/* Memory Map for ADSP-BF561 processors */
+
+#ifdef CONFIG_BF561
+#define L1_CODE_START     0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#define L1_CODE_LENGTH      0x4000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Level 2 Memory */
+#define L2_START		0xFEB00000
+#define L2_LENGTH		0x20000
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START	0xFFB00000
+#define L1_SCRATCH_LENGTH	0x1000
+
+#endif				/* _MEM_MAP_533_H_ */
diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
new file mode 100644
index 00000000000..a6ee8206efb
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/portmux.h
@@ -0,0 +1,89 @@
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_CLK	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_PPI0_FS2	(P_DONTCARE)
+#define P_PPI0_FS3	(P_DONTCARE)
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF47))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF46))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF45))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF44))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF43))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF42))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF41))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF40))
+#define P_PPI0_D0	(P_DONTCARE)
+#define P_PPI0_D1	(P_DONTCARE)
+#define P_PPI0_D2	(P_DONTCARE)
+#define P_PPI0_D3	(P_DONTCARE)
+#define P_PPI0_D4	(P_DONTCARE)
+#define P_PPI0_D5	(P_DONTCARE)
+#define P_PPI0_D6	(P_DONTCARE)
+#define P_PPI0_D7	(P_DONTCARE)
+#define P_PPI1_CLK	(P_DONTCARE)
+#define P_PPI1_FS1	(P_DONTCARE)
+#define P_PPI1_FS2	(P_DONTCARE)
+#define P_PPI1_FS3	(P_DONTCARE)
+#define P_PPI1_D15	(P_DEFINED | P_IDENT(GPIO_PF39))
+#define P_PPI1_D14	(P_DEFINED | P_IDENT(GPIO_PF38))
+#define P_PPI1_D13	(P_DEFINED | P_IDENT(GPIO_PF37))
+#define P_PPI1_D12	(P_DEFINED | P_IDENT(GPIO_PF36))
+#define P_PPI1_D11	(P_DEFINED | P_IDENT(GPIO_PF35))
+#define P_PPI1_D10	(P_DEFINED | P_IDENT(GPIO_PF34))
+#define P_PPI1_D9	(P_DEFINED | P_IDENT(GPIO_PF33))
+#define P_PPI1_D8	(P_DEFINED | P_IDENT(GPIO_PF32))
+#define P_PPI1_D0	(P_DONTCARE)
+#define P_PPI1_D1	(P_DONTCARE)
+#define P_PPI1_D2	(P_DONTCARE)
+#define P_PPI1_D3	(P_DONTCARE)
+#define P_PPI1_D4	(P_DONTCARE)
+#define P_PPI1_D5	(P_DONTCARE)
+#define P_PPI1_D6	(P_DONTCARE)
+#define P_PPI1_D7	(P_DONTCARE)
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF31))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF30))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(GPIO_PF29))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(GPIO_PF28))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PF27))
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PF26))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF25))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PF24))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF23))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF22))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PF21))
+#define P_SPORT1_DRPRI	(P_DONTCARE)
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(GPIO_PF20))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(GPIO_PF19))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(GPIO_PF18))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(GPIO_PF17))
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(GPIO_PF16))
+#define P_SPORT0_DRPRI	(P_DONTCARE)
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_TMR11		(P_DONTCARE)
+#define P_TMR10		(P_DONTCARE)
+#define P_TMR9		(P_DONTCARE)
+#define P_TMR8		(P_DONTCARE)
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_TMR0		(P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_SPI0_MOSI	(P_DONTCARE)
+#define P_SPI0_MISO	(P_DONTCARE)
+#define P_SPI0_SCK	(P_DONTCARE)
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
index 09b541b0f7c..9d2f2334472 100644
--- a/arch/blackfin/mach-bf561/ints-priority.c
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 422bfee34ad..e6ed57c56d4 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -3,9 +3,10 @@
 #
 
 obj-y := \
-	cache.o cacheinit.o entry.o \
-	interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
+	cache.o entry.o head.o \
+	interrupt.o irqpanic.o arch_checks.o ints-priority.o
 
+obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o
 obj-$(CONFIG_PM)          += pm.o dpmc_modes.o
 obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index caaab49e9cf..98133b968f7 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -27,8 +27,9 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <asm/mach/anomaly.h>
-#include <asm/mach-common/clocks.h>
+#include <asm/fixed_code.h>
+#include <mach/anomaly.h>
+#include <asm/clocks.h>
 
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 
@@ -54,8 +55,10 @@
 
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
 
-#ifdef CONFIG_MEM_SIZE
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
+#if CONFIG_BOOT_LOAD < FIXED_CODE_END
+# error "The kernel load address must be after the fixed code section"
 #endif
+
+#if (CONFIG_BOOT_LOAD & 0x3)
+# error "The kernel load address must be 4 byte aligned"
 #endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 0521b158820..85f8c79b3c3 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -34,81 +34,6 @@
 #include <asm/cache.h>
 
 .text
-.align 2
-ENTRY(_cache_invalidate)
-
-	/*
-	 * Icache or DcacheA or DcacheB Invalidation
-	 * or any combination thereof
-	 * R0 has bits
-	 * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P
-	 * set as required
-	 */
-	[--SP] = R7;
-
-	R7 = R0;
-	CC = BITTST(R7,CPLB_ENABLE_ICACHE_P);
-	IF !CC JUMP .Lno_icache;
-	[--SP] = RETS;
-	CALL _icache_invalidate;
-	RETS = [SP++];
-.Lno_icache:
-	CC = BITTST(R7,CPLB_ENABLE_DCACHE_P);
-	IF !CC JUMP .Lno_dcache_a;
-	R0 = 0;         /* specifies bank A */
-	[--SP] = RETS;
-	CALL _dcache_invalidate;
-	RETS = [SP++];
-.Lno_dcache_a:
-	CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P);
-	IF !CC JUMP .Lno_dcache_b;
-	R0 = 0;
-	BITSET(R0, 23);		/* specifies bank B */
-	[--SP] = RETS;
-	CALL  _dcache_invalidate;
-	RETS = [SP++];
-.Lno_dcache_b:
-	R7 = [SP++];
-	RTS;
-ENDPROC(_cache_invalidate)
-
-/* Invalidate the Entire Instruction cache by
- * disabling IMC bit
- */
-ENTRY(_icache_invalidate)
-ENTRY(_invalidate_entire_icache)
-	[--SP] = ( R7:5);
-
-	P0.L = LO(IMEM_CONTROL);
-	P0.H = HI(IMEM_CONTROL);
-	R7 = [P0];
-
-	/* Clear the IMC bit , All valid bits in the instruction
-	 * cache are set to the invalid state
-	 */
-	BITCLR(R7,IMC_P);
-	CLI R6;
-	SSYNC;		/* SSYNC required before invalidating cache. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	/* Configures the instruction cache agian */
-	R6 = (IMC | ENICPLB);
-	R7 = R7 | R6;
-
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	( R7:5) = [SP++];
-	RTS;
-ENDPROC(_invalidate_entire_icache)
-ENDPROC(_icache_invalidate)
 
 /*
  * blackfin_cache_flush_range(start, end)
@@ -190,46 +115,6 @@ ENTRY(_blackfin_dcache_invalidate_range)
 	RTS;
 ENDPROC(_blackfin_dcache_invalidate_range)
 
-/* Invalidate the Entire Data cache by
- * clearing DMC[1:0] bits
- */
-ENTRY(_invalidate_entire_dcache)
-ENTRY(_dcache_invalidate)
-	[--SP] = ( R7:6);
-
-	P0.L = LO(DMEM_CONTROL);
-	P0.H = HI(DMEM_CONTROL);
-	R7 = [P0];
-
-	/* Clear the DMC[1:0] bits, All valid bits in the data
-	 * cache are set to the invalid state
-	 */
-	BITCLR(R7,DMC0_P);
-	BITCLR(R7,DMC1_P);
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	/* Configures the data cache again */
-
-	R6 = DMEM_CNTR;
-	R7 = R7 | R6;
-
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	( R7:6) = [SP++];
-	RTS;
-ENDPROC(_dcache_invalidate)
-ENDPROC(_invalidate_entire_dcache)
-
 ENTRY(_blackfin_dcache_flush_range)
 	R2 = -L1_CACHE_BYTES;
 	R2 = R0 & R2;
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
deleted file mode 100644
index 22fada0c1cb..00000000000
--- a/arch/blackfin/mach-common/cacheinit.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * File:         arch/blackfin/mach-common/cacheinit.S
- * Based on:
- * Author:       LG Soft India
- *
- * Created:      ?
- * Description:  cache initialization
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/* This function sets up the data and instruction cache. The
- * tables like icplb table, dcplb table and Page Descriptor table
- * are defined in cplbtab.h. You can configure those tables for
- * your suitable requirements
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-#if ANOMALY_05000125
-#if defined(CONFIG_BFIN_ICACHE)
-ENTRY(_bfin_write_IMEM_CONTROL)
-
-	/* Enable Instruction Cache */
-	P0.l = LO(IMEM_CONTROL);
-	P0.h = HI(IMEM_CONTROL);
-
-	/* Anomaly 05000125 */
-	CLI R1;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P0] = R0;
-	SSYNC;
-	STI R1;
-	RTS;
-
-ENDPROC(_bfin_write_IMEM_CONTROL)
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-ENTRY(_bfin_write_DMEM_CONTROL)
-	P0.l = LO(DMEM_CONTROL);
-	P0.h = HI(DMEM_CONTROL);
-
-	CLI R1;
-	SSYNC;		/* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
-	[P0] = R0;
-	SSYNC;
-	STI R1;
-	RTS;
-
-ENDPROC(_bfin_write_DMEM_CONTROL)
-#endif
-
-#endif
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index b7981d31c39..ad5431e2cd0 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -6,8 +6,8 @@
 
 #include <linux/linkage.h>
 #include <asm/blackfin.h>
-#include <asm/mach/irq.h>
-
+#include <mach/irq.h>
+#include <asm/dpmc.h>
 
 .section .l1.text
 
@@ -51,86 +51,32 @@ ENTRY(_sleep_mode)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_sleep_mode)
 
 ENTRY(_hibernate_mode)
 	[--SP] = ( R7:0, P5:0 );
 	[--SP] =  RETS;
 
+	R3 = R0;
+	R0 = IWR_DISABLE_ALL;
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
 	call _set_sic_iwr;
+	call _set_dram_srfs;
+	SSYNC;
 
 	R0 = 0xFFFF (Z);
 	call _set_rtc_istat;
 
 	P0.H = hi(VR_CTL);
 	P0.L = lo(VR_CTL);
-	R1 = W[P0](z);
-	BITSET (R1, 8);
-	BITCLR (R1, 0);
-	BITCLR (R1, 1);
-	W[P0] = R1.L;
-	SSYNC;
 
+	W[P0] = R3.L;
 	CLI R2;
 	IDLE;
-
-	/* Actually, adding anything may not be necessary...SDRAM contents
-	 * are lost
-	 */
-
-ENTRY(_deep_sleep)
-	[--SP] = ( R7:0, P5:0 );
-	[--SP] =  RETS;
-
-	CLI R4;
-
-	R0 = IWR_ENABLE(0);
-	R1 = IWR_DISABLE_ALL;
-	R2 = IWR_DISABLE_ALL;
-
-	call _set_sic_iwr;
-
-	call _set_dram_srfs;
-
-	/* Clear all the interrupts,bits sticky */
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat
-
-	P0.H = hi(PLL_CTL);
-	P0.L = lo(PLL_CTL);
-	R0 = W[P0](z);
-	BITSET (R0, 5);
-	W[P0] = R0.L;
-
-	call _test_pll_locked;
-
-	SSYNC;
-	IDLE;
-
-	call _unset_dram_srfs;
-
-	call _test_pll_locked;
-
-	R0 = IWR_ENABLE(0);
-	R1 = IWR_DISABLE_ALL;
-	R2 = IWR_DISABLE_ALL;
-
-	call _set_sic_iwr;
-
-	P0.H = hi(PLL_CTL);
-	P0.L = lo(PLL_CTL);
-	R0 = w[p0](z);
-	BITCLR (R0, 3);
-	BITCLR (R0, 5);
-	BITCLR (R0, 8);
-	w[p0] = R0;
-	IDLE;
-	call _test_pll_locked;
-
-	STI R4;
-
-	RETS = [SP++];
-	( R7:0, P5:0 ) = [SP++];
-	RTS;
+.Lforever:
+	jump .Lforever;
+ENDPROC(_hibernate_mode)
 
 ENTRY(_sleep_deeper)
 	[--SP] = ( R7:0, P5:0 );
@@ -232,53 +178,73 @@ ENTRY(_sleep_deeper)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_sleep_deeper)
 
 ENTRY(_set_dram_srfs)
 	/*  set the dram to self refresh mode */
-#if defined(CONFIG_BF54x)
+	SSYNC;
+#if defined(EBIU_RSTCTL)	/* DDR */
 	P0.H = hi(EBIU_RSTCTL);
 	P0.L = lo(EBIU_RSTCTL);
 	R2 = [P0];
-	R3.H = hi(SRREQ);
-	R3.L = lo(SRREQ);
-#else
-	P0.H = hi(EBIU_SDGCTL);
+	BITSET(R2, 3); /* SRREQ enter self-refresh mode */
+	[P0] = R2;
+	SSYNC;
+1:
+	R2 = [P0];
+	CC = BITTST(R2, 4);
+	if !CC JUMP 1b;
+#else 				/* SDRAM */
 	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
 	R2 = [P0];
-	R3.H = hi(SRFS);
-	R3.L = lo(SRFS);
-#endif
-	R2 = R2|R3;
+	BITSET(R2, 24); /* SRFS enter self-refresh mode */
 	[P0] = R2;
-	ssync;
-#if defined(CONFIG_BF54x)
-.LSRR_MODE:
+	SSYNC;
+
+	P0.L = lo(EBIU_SDSTAT);
+	P0.H = hi(EBIU_SDSTAT);
+1:
+	R2 = w[P0];
+	SSYNC;
+	cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */
+	if !cc jump 1b;
+
+	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
 	R2 = [P0];
-	CC = BITTST(R2, 4);
-	if !CC JUMP .LSRR_MODE;
+	BITCLR(R2, 0); /* SCTLE disable CLKOUT */
+	[P0] = R2;
 #endif
 	RTS;
+ENDPROC(_set_dram_srfs)
 
 ENTRY(_unset_dram_srfs)
 	/*  set the dram out of self refresh mode */
-#if defined(CONFIG_BF54x)
+#if defined(EBIU_RSTCTL)	/* DDR */
 	P0.H = hi(EBIU_RSTCTL);
 	P0.L = lo(EBIU_RSTCTL);
 	R2 = [P0];
-	R3.H = hi(SRREQ);
-	R3.L = lo(SRREQ);
-#else
+	BITCLR(R2, 3); /* clear SRREQ bit */
+	[P0] = R2;
+#elif defined(EBIU_SDGCTL)	/* SDRAM */
+
+	P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */
+	P0.H = hi(EBIU_SDGCTL);
+	R2 = [P0];
+	BITSET(R2, 0); /* SCTLE enable CLKOUT */
+	[P0] = R2
+	SSYNC;
+
+	P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */
 	P0.H = hi(EBIU_SDGCTL);
-	P0.L = lo(EBIU_SDGCTL);
 	R2 = [P0];
-	R3.H = hi(SRFS);
-	R3.L = lo(SRFS);
+	BITCLR(R2, 24); /* clear SRFS bit */
+	[P0] = R2
 #endif
-	R3 = ~R3;
-	R2 = R2&R3;
-	[P0] = R2;
-	ssync;
+	SSYNC;
 	RTS;
+ENDPROC(_unset_dram_srfs)
 
 ENTRY(_set_sic_iwr)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
@@ -300,6 +266,7 @@ ENTRY(_set_sic_iwr)
 
 	SSYNC;
 	RTS;
+ENDPROC(_set_sic_iwr)
 
 ENTRY(_set_rtc_istat)
 #ifndef CONFIG_BF561
@@ -307,8 +274,14 @@ ENTRY(_set_rtc_istat)
 	P0.L = lo(RTC_ISTAT);
 	w[P0] = R0.L;
 	SSYNC;
+#elif (ANOMALY_05000371)
+	nop;
+	nop;
+	nop;
+	nop;
 #endif
 	RTS;
+ENDPROC(_set_rtc_istat)
 
 ENTRY(_test_pll_locked)
 	P0.H = hi(PLL_STAT);
@@ -318,3 +291,509 @@ ENTRY(_test_pll_locked)
 	CC = BITTST(R0,5);
 	IF !CC JUMP 1b;
 	RTS;
+ENDPROC(_test_pll_locked)
+
+.section .text
+
+ENTRY(_do_hibernate)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] =  RETS;
+	/* Save System MMRs */
+	R2 = R0;
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+
+#ifdef SIC_IMASK0
+	PM_SYS_PUSH(SIC_IMASK0)
+#endif
+#ifdef SIC_IMASK1
+	PM_SYS_PUSH(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK2
+	PM_SYS_PUSH(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK
+	PM_SYS_PUSH(SIC_IMASK)
+#endif
+#ifdef SICA_IMASK0
+	PM_SYS_PUSH(SICA_IMASK0)
+#endif
+#ifdef SICA_IMASK1
+	PM_SYS_PUSH(SICA_IMASK1)
+#endif
+#ifdef SIC_IAR2
+	PM_SYS_PUSH(SIC_IAR0)
+	PM_SYS_PUSH(SIC_IAR1)
+	PM_SYS_PUSH(SIC_IAR2)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_PUSH(SIC_IAR3)
+#endif
+#ifdef SIC_IAR4
+	PM_SYS_PUSH(SIC_IAR4)
+	PM_SYS_PUSH(SIC_IAR5)
+	PM_SYS_PUSH(SIC_IAR6)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_PUSH(SIC_IAR7)
+#endif
+#ifdef SIC_IAR8
+	PM_SYS_PUSH(SIC_IAR8)
+	PM_SYS_PUSH(SIC_IAR9)
+	PM_SYS_PUSH(SIC_IAR10)
+	PM_SYS_PUSH(SIC_IAR11)
+#endif
+
+#ifdef SICA_IAR0
+	PM_SYS_PUSH(SICA_IAR0)
+	PM_SYS_PUSH(SICA_IAR1)
+	PM_SYS_PUSH(SICA_IAR2)
+	PM_SYS_PUSH(SICA_IAR3)
+	PM_SYS_PUSH(SICA_IAR4)
+	PM_SYS_PUSH(SICA_IAR5)
+	PM_SYS_PUSH(SICA_IAR6)
+	PM_SYS_PUSH(SICA_IAR7)
+#endif
+
+#ifdef SIC_IWR
+	PM_SYS_PUSH(SIC_IWR)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_PUSH(SIC_IWR0)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_PUSH(SIC_IWR1)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_PUSH(SIC_IWR2)
+#endif
+#ifdef SICA_IWR0
+	PM_SYS_PUSH(SICA_IWR0)
+#endif
+#ifdef SICA_IWR1
+	PM_SYS_PUSH(SICA_IWR1)
+#endif
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_PUSH(PINT0_ASSIGN)
+	PM_SYS_PUSH(PINT1_ASSIGN)
+	PM_SYS_PUSH(PINT2_ASSIGN)
+	PM_SYS_PUSH(PINT3_ASSIGN)
+#endif
+
+	PM_SYS_PUSH(EBIU_AMBCTL0)
+	PM_SYS_PUSH(EBIU_AMBCTL1)
+	PM_SYS_PUSH16(EBIU_AMGCTL)
+
+#ifdef EBIU_FCTL
+	PM_SYS_PUSH(EBIU_MBSCTL)
+	PM_SYS_PUSH(EBIU_MODE)
+	PM_SYS_PUSH(EBIU_FCTL)
+#endif
+
+	PM_SYS_PUSH16(SYSCR)
+
+	/* Save Core MMRs */
+	P0.H = hi(SRAM_BASE_ADDRESS);
+	P0.L = lo(SRAM_BASE_ADDRESS);
+
+	PM_PUSH(DMEM_CONTROL)
+	PM_PUSH(DCPLB_ADDR0)
+	PM_PUSH(DCPLB_ADDR1)
+	PM_PUSH(DCPLB_ADDR2)
+	PM_PUSH(DCPLB_ADDR3)
+	PM_PUSH(DCPLB_ADDR4)
+	PM_PUSH(DCPLB_ADDR5)
+	PM_PUSH(DCPLB_ADDR6)
+	PM_PUSH(DCPLB_ADDR7)
+	PM_PUSH(DCPLB_ADDR8)
+	PM_PUSH(DCPLB_ADDR9)
+	PM_PUSH(DCPLB_ADDR10)
+	PM_PUSH(DCPLB_ADDR11)
+	PM_PUSH(DCPLB_ADDR12)
+	PM_PUSH(DCPLB_ADDR13)
+	PM_PUSH(DCPLB_ADDR14)
+	PM_PUSH(DCPLB_ADDR15)
+	PM_PUSH(DCPLB_DATA0)
+	PM_PUSH(DCPLB_DATA1)
+	PM_PUSH(DCPLB_DATA2)
+	PM_PUSH(DCPLB_DATA3)
+	PM_PUSH(DCPLB_DATA4)
+	PM_PUSH(DCPLB_DATA5)
+	PM_PUSH(DCPLB_DATA6)
+	PM_PUSH(DCPLB_DATA7)
+	PM_PUSH(DCPLB_DATA8)
+	PM_PUSH(DCPLB_DATA9)
+	PM_PUSH(DCPLB_DATA10)
+	PM_PUSH(DCPLB_DATA11)
+	PM_PUSH(DCPLB_DATA12)
+	PM_PUSH(DCPLB_DATA13)
+	PM_PUSH(DCPLB_DATA14)
+	PM_PUSH(DCPLB_DATA15)
+	PM_PUSH(IMEM_CONTROL)
+	PM_PUSH(ICPLB_ADDR0)
+	PM_PUSH(ICPLB_ADDR1)
+	PM_PUSH(ICPLB_ADDR2)
+	PM_PUSH(ICPLB_ADDR3)
+	PM_PUSH(ICPLB_ADDR4)
+	PM_PUSH(ICPLB_ADDR5)
+	PM_PUSH(ICPLB_ADDR6)
+	PM_PUSH(ICPLB_ADDR7)
+	PM_PUSH(ICPLB_ADDR8)
+	PM_PUSH(ICPLB_ADDR9)
+	PM_PUSH(ICPLB_ADDR10)
+	PM_PUSH(ICPLB_ADDR11)
+	PM_PUSH(ICPLB_ADDR12)
+	PM_PUSH(ICPLB_ADDR13)
+	PM_PUSH(ICPLB_ADDR14)
+	PM_PUSH(ICPLB_ADDR15)
+	PM_PUSH(ICPLB_DATA0)
+	PM_PUSH(ICPLB_DATA1)
+	PM_PUSH(ICPLB_DATA2)
+	PM_PUSH(ICPLB_DATA3)
+	PM_PUSH(ICPLB_DATA4)
+	PM_PUSH(ICPLB_DATA5)
+	PM_PUSH(ICPLB_DATA6)
+	PM_PUSH(ICPLB_DATA7)
+	PM_PUSH(ICPLB_DATA8)
+	PM_PUSH(ICPLB_DATA9)
+	PM_PUSH(ICPLB_DATA10)
+	PM_PUSH(ICPLB_DATA11)
+	PM_PUSH(ICPLB_DATA12)
+	PM_PUSH(ICPLB_DATA13)
+	PM_PUSH(ICPLB_DATA14)
+	PM_PUSH(ICPLB_DATA15)
+	PM_PUSH(EVT0)
+	PM_PUSH(EVT1)
+	PM_PUSH(EVT2)
+	PM_PUSH(EVT3)
+	PM_PUSH(EVT4)
+	PM_PUSH(EVT5)
+	PM_PUSH(EVT6)
+	PM_PUSH(EVT7)
+	PM_PUSH(EVT8)
+	PM_PUSH(EVT9)
+	PM_PUSH(EVT10)
+	PM_PUSH(EVT11)
+	PM_PUSH(EVT12)
+	PM_PUSH(EVT13)
+	PM_PUSH(EVT14)
+	PM_PUSH(EVT15)
+	PM_PUSH(IMASK)
+	PM_PUSH(ILAT)
+	PM_PUSH(IPRIO)
+	PM_PUSH(TCNTL)
+	PM_PUSH(TPERIOD)
+	PM_PUSH(TSCALE)
+	PM_PUSH(TCOUNT)
+	PM_PUSH(TBUFCTL)
+
+	/* Save Core Registers */
+	[--sp] = SYSCFG;
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+	[--sp] = CYCLES;
+	[--sp] = CYCLES2;
+
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+
+	/* Save Magic, return address and Stack Pointer */
+	P0.H = 0;
+	P0.L = 0;
+	R0.H = 0xDEAD;	/* Hibernate Magic */
+	R0.L = 0xBEEF;
+	[P0++] = R0;	/* Store Hibernate Magic */
+	R0.H = .Lpm_resume_here;
+	R0.L = .Lpm_resume_here;
+	[P0++] = R0;	/* Save Return Address */
+	[P0++] = SP;	/* Save Stack Pointer */
+	P0.H = _hibernate_mode;
+	P0.L = _hibernate_mode;
+	R0 = R2;
+	call (P0); /* Goodbye */
+
+.Lpm_resume_here:
+
+	/* Restore Core Registers */
+	SEQSTAT = [sp++];
+	RETE = [sp++];
+	RETN = [sp++];
+	RETX = [sp++];
+	r0 = [sp++];
+	RETI = r0;
+	RETS = [sp++];
+
+	CYCLES2 = [sp++];
+	CYCLES = [sp++];
+	ASTAT = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	usp = [sp++];
+	fp = [sp++];
+
+	( R7 : 0, P5 : 0) = [ SP ++ ];
+	SYSCFG = [sp++];
+
+	/* Restore Core MMRs */
+
+	PM_POP(TBUFCTL)
+	PM_POP(TCOUNT)
+	PM_POP(TSCALE)
+	PM_POP(TPERIOD)
+	PM_POP(TCNTL)
+	PM_POP(IPRIO)
+	PM_POP(ILAT)
+	PM_POP(IMASK)
+	PM_POP(EVT15)
+	PM_POP(EVT14)
+	PM_POP(EVT13)
+	PM_POP(EVT12)
+	PM_POP(EVT11)
+	PM_POP(EVT10)
+	PM_POP(EVT9)
+	PM_POP(EVT8)
+	PM_POP(EVT7)
+	PM_POP(EVT6)
+	PM_POP(EVT5)
+	PM_POP(EVT4)
+	PM_POP(EVT3)
+	PM_POP(EVT2)
+	PM_POP(EVT1)
+	PM_POP(EVT0)
+	PM_POP(ICPLB_DATA15)
+	PM_POP(ICPLB_DATA14)
+	PM_POP(ICPLB_DATA13)
+	PM_POP(ICPLB_DATA12)
+	PM_POP(ICPLB_DATA11)
+	PM_POP(ICPLB_DATA10)
+	PM_POP(ICPLB_DATA9)
+	PM_POP(ICPLB_DATA8)
+	PM_POP(ICPLB_DATA7)
+	PM_POP(ICPLB_DATA6)
+	PM_POP(ICPLB_DATA5)
+	PM_POP(ICPLB_DATA4)
+	PM_POP(ICPLB_DATA3)
+	PM_POP(ICPLB_DATA2)
+	PM_POP(ICPLB_DATA1)
+	PM_POP(ICPLB_DATA0)
+	PM_POP(ICPLB_ADDR15)
+	PM_POP(ICPLB_ADDR14)
+	PM_POP(ICPLB_ADDR13)
+	PM_POP(ICPLB_ADDR12)
+	PM_POP(ICPLB_ADDR11)
+	PM_POP(ICPLB_ADDR10)
+	PM_POP(ICPLB_ADDR9)
+	PM_POP(ICPLB_ADDR8)
+	PM_POP(ICPLB_ADDR7)
+	PM_POP(ICPLB_ADDR6)
+	PM_POP(ICPLB_ADDR5)
+	PM_POP(ICPLB_ADDR4)
+	PM_POP(ICPLB_ADDR3)
+	PM_POP(ICPLB_ADDR2)
+	PM_POP(ICPLB_ADDR1)
+	PM_POP(ICPLB_ADDR0)
+	PM_POP(IMEM_CONTROL)
+	PM_POP(DCPLB_DATA15)
+	PM_POP(DCPLB_DATA14)
+	PM_POP(DCPLB_DATA13)
+	PM_POP(DCPLB_DATA12)
+	PM_POP(DCPLB_DATA11)
+	PM_POP(DCPLB_DATA10)
+	PM_POP(DCPLB_DATA9)
+	PM_POP(DCPLB_DATA8)
+	PM_POP(DCPLB_DATA7)
+	PM_POP(DCPLB_DATA6)
+	PM_POP(DCPLB_DATA5)
+	PM_POP(DCPLB_DATA4)
+	PM_POP(DCPLB_DATA3)
+	PM_POP(DCPLB_DATA2)
+	PM_POP(DCPLB_DATA1)
+	PM_POP(DCPLB_DATA0)
+	PM_POP(DCPLB_ADDR15)
+	PM_POP(DCPLB_ADDR14)
+	PM_POP(DCPLB_ADDR13)
+	PM_POP(DCPLB_ADDR12)
+	PM_POP(DCPLB_ADDR11)
+	PM_POP(DCPLB_ADDR10)
+	PM_POP(DCPLB_ADDR9)
+	PM_POP(DCPLB_ADDR8)
+	PM_POP(DCPLB_ADDR7)
+	PM_POP(DCPLB_ADDR6)
+	PM_POP(DCPLB_ADDR5)
+	PM_POP(DCPLB_ADDR4)
+	PM_POP(DCPLB_ADDR3)
+	PM_POP(DCPLB_ADDR2)
+	PM_POP(DCPLB_ADDR1)
+	PM_POP(DCPLB_ADDR0)
+	PM_POP(DMEM_CONTROL)
+
+	/* Restore System MMRs */
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	PM_SYS_POP16(SYSCR)
+
+#ifdef EBIU_FCTL
+	PM_SYS_POP(EBIU_FCTL)
+	PM_SYS_POP(EBIU_MODE)
+	PM_SYS_POP(EBIU_MBSCTL)
+#endif
+	PM_SYS_POP16(EBIU_AMGCTL)
+	PM_SYS_POP(EBIU_AMBCTL1)
+	PM_SYS_POP(EBIU_AMBCTL0)
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_POP(PINT3_ASSIGN)
+	PM_SYS_POP(PINT2_ASSIGN)
+	PM_SYS_POP(PINT1_ASSIGN)
+	PM_SYS_POP(PINT0_ASSIGN)
+#endif
+
+#ifdef SICA_IWR1
+	PM_SYS_POP(SICA_IWR1)
+#endif
+#ifdef SICA_IWR0
+	PM_SYS_POP(SICA_IWR0)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_POP(SIC_IWR2)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_POP(SIC_IWR1)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_POP(SIC_IWR0)
+#endif
+#ifdef SIC_IWR
+	PM_SYS_POP(SIC_IWR)
+#endif
+
+#ifdef SICA_IAR0
+	PM_SYS_POP(SICA_IAR7)
+	PM_SYS_POP(SICA_IAR6)
+	PM_SYS_POP(SICA_IAR5)
+	PM_SYS_POP(SICA_IAR4)
+	PM_SYS_POP(SICA_IAR3)
+	PM_SYS_POP(SICA_IAR2)
+	PM_SYS_POP(SICA_IAR1)
+	PM_SYS_POP(SICA_IAR0)
+#endif
+
+#ifdef SIC_IAR8
+	PM_SYS_POP(SIC_IAR11)
+	PM_SYS_POP(SIC_IAR10)
+	PM_SYS_POP(SIC_IAR9)
+	PM_SYS_POP(SIC_IAR8)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_POP(SIC_IAR7)
+#endif
+#ifdef SIC_IAR6
+	PM_SYS_POP(SIC_IAR6)
+	PM_SYS_POP(SIC_IAR5)
+	PM_SYS_POP(SIC_IAR4)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_POP(SIC_IAR3)
+#endif
+#ifdef SIC_IAR2
+	PM_SYS_POP(SIC_IAR2)
+	PM_SYS_POP(SIC_IAR1)
+	PM_SYS_POP(SIC_IAR0)
+#endif
+#ifdef SICA_IMASK1
+	PM_SYS_POP(SICA_IMASK1)
+#endif
+#ifdef SICA_IMASK0
+	PM_SYS_POP(SICA_IMASK0)
+#endif
+#ifdef SIC_IMASK
+	PM_SYS_POP(SIC_IMASK)
+#endif
+#ifdef SIC_IMASK2
+	PM_SYS_POP(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK1
+	PM_SYS_POP(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK0
+	PM_SYS_POP(SIC_IMASK0)
+#endif
+
+	[--sp] = RETI;	/* Clear Global Interrupt Disable */
+	SP += 4;
+
+	RETS = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+ENDPROC(_do_hibernate)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 038f70e0be6..847c172a99e 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -43,7 +43,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 #if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
 # define EX_SCRATCH_REG RETN
@@ -158,6 +158,39 @@ ENTRY(_ex_single_step)
 	cc = r7 == r6;
 	if cc jump _bfin_return_from_exception;
 
+#ifdef CONFIG_KGDB
+	/* Don't do single step in hardware exception handler */
+        p5.l = lo(IPEND);
+        p5.h = hi(IPEND);
+	r6 = [p5];
+	cc = bittst(r6, 4);
+	if cc jump _bfin_return_from_exception;
+	cc = bittst(r6, 5);
+	if cc jump _bfin_return_from_exception;
+
+	/* skip single step if current interrupt priority is higher than
+	 * that of the first instruction, from which gdb starts single step */
+	r6 >>= 6;
+	r7 = 10;
+.Lfind_priority_start:
+	cc = bittst(r6, 0);
+	if cc jump .Lfind_priority_done;
+	r6 >>= 1;
+	r7 += -1;
+	cc = r7 == 0;
+	if cc jump .Lfind_priority_done;
+	jump.s .Lfind_priority_start;
+.Lfind_priority_done:
+	p4.l = _debugger_step;
+	p4.h = _debugger_step;
+	r6 = [p4];
+	cc = r6 == 0;
+	if cc jump .Ldo_single_step;
+	r6 += -1;
+	cc = r6 < r7;
+	if cc jump 1f;
+.Ldo_single_step:
+#else
 	/* If we were in user mode, do the single step normally.  */
 	p5.l = lo(IPEND);
 	p5.h = hi(IPEND);
@@ -166,6 +199,7 @@ ENTRY(_ex_single_step)
 	r7 = r7 & r6;
 	cc = r7 == 0;
 	if !cc jump 1f;
+#endif
 
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
@@ -1388,6 +1422,12 @@ ENTRY(_sys_call_table)
 	.long _sys_semtimedop
 	.long _sys_timerfd_settime
 	.long _sys_timerfd_gettime
+	.long _sys_signalfd4		/* 360 */
+	.long _sys_eventfd2
+	.long _sys_epoll_create1
+	.long _sys_dup3
+	.long _sys_pipe2
+	.long _sys_inotify_init1	/* 365 */
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
new file mode 100644
index 00000000000..191b4e974c4
--- /dev/null
+++ b/arch/blackfin/mach-common/head.S
@@ -0,0 +1,207 @@
+/*
+ * Common Blackfin startup code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#include <asm/thread_info.h>
+#include <asm/trace.h>
+
+__INIT
+
+#define INITIAL_STACK	(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+ENTRY(__start)
+	/* R0: argument of command line string, passed from uboot, save it */
+	R7 = R0;
+	/* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+	R0 = SYSCFG_SNEN;
+#else
+	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+	SYSCFG = R0;
+	R0 = 0;
+
+	/* Clear Out All the data and pointer Registers */
+	R1 = R0;
+	R2 = R0;
+	R3 = R0;
+	R4 = R0;
+	R5 = R0;
+	R6 = R0;
+
+	P0 = R0;
+	P1 = R0;
+	P2 = R0;
+	P3 = R0;
+	P4 = R0;
+	P5 = R0;
+
+	LC0 = r0;
+	LC1 = r0;
+	L0 = r0;
+	L1 = r0;
+	L2 = r0;
+	L3 = r0;
+
+	/* Clear Out All the DAG Registers */
+	B0 = r0;
+	B1 = r0;
+	B2 = r0;
+	B3 = r0;
+
+	I0 = r0;
+	I1 = r0;
+	I2 = r0;
+	I3 = r0;
+
+	M0 = r0;
+	M1 = r0;
+	M2 = r0;
+	M3 = r0;
+
+	trace_buffer_init(p0,r0);
+	P0 = R1;
+	R0 = R1;
+
+	/* Turn off the icache */
+	p0.l = LO(IMEM_CONTROL);
+	p0.h = HI(IMEM_CONTROL);
+	R1 = [p0];
+	R0 = ~ENICPLB;
+	R0 = R0 & R1;
+	[p0] = R0;
+	SSYNC;
+
+	/* Turn off the dcache */
+	p0.l = LO(DMEM_CONTROL);
+	p0.h = HI(DMEM_CONTROL);
+	R1 = [p0];
+	R0 = ~ENDCPLB;
+	R0 = R0 & R1;
+	[p0] = R0;
+	SSYNC;
+
+	/* Save RETX, in case of doublefault */
+	p0.l = ___retx;
+	p0.h = ___retx;
+	R0 = RETX;
+	[P0] = R0;
+
+	/* Initialize stack pointer */
+	sp.l = lo(INITIAL_STACK);
+	sp.h = hi(INITIAL_STACK);
+	fp = sp;
+	usp = sp;
+
+#ifdef CONFIG_EARLY_PRINTK
+	call _init_early_exception_vectors;
+#endif
+
+	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+	call _bf53x_relocate_l1_mem;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+	call _start_dma_code;
+#endif
+
+	/* This section keeps the processor in supervisor mode
+	 * during kernel boot.  Switches to user mode at end of boot.
+	 * See page 3-9 of Hardware Reference manual for documentation.
+	 */
+
+	/* EVT15 = _real_start */
+
+	p0.l = lo(EVT15);
+	p0.h = hi(EVT15);
+	p1.l = _real_start;
+	p1.h = _real_start;
+	[p0] = p1;
+	csync;
+
+	p0.l = lo(IMASK);
+	p0.h = hi(IMASK);
+	p1.l = IMASK_IVG15;
+	p1.h = 0x0;
+	[p0] = p1;
+	csync;
+
+	raise 15;
+	p0.l = .LWAIT_HERE;
+	p0.h = .LWAIT_HERE;
+	reti = p0;
+#if ANOMALY_05000281
+	nop; nop; nop;
+#endif
+	rti;
+
+.LWAIT_HERE:
+	jump .LWAIT_HERE;
+ENDPROC(__start)
+
+/* A little BF561 glue ... */
+#ifndef WDOG_CTL
+# define WDOG_CTL WDOGA_CTL
+#endif
+
+ENTRY(_real_start)
+	/* Enable nested interrupts */
+	[--sp] = reti;
+
+	/* watchdog off for now */
+	p0.l = lo(WDOG_CTL);
+	p0.h = hi(WDOG_CTL);
+	r0 = 0xAD6(z);
+	w[p0] = r0;
+	ssync;
+
+	/* Zero out the bss region
+	 * Note: this will fail if bss is 0 bytes ...
+	 */
+	r0 = 0 (z);
+	r1.l = ___bss_start;
+	r1.h = ___bss_start;
+	r2.l = ___bss_stop;
+	r2.h = ___bss_stop;
+	r2 = r2 - r1;
+	r2 >>= 2;
+	p1 = r1;
+	p2 = r2;
+	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
+.L_clear_bss:
+	[p1++] = r0;
+
+	/* In case there is a NULL pointer reference,
+	 * zero out region before stext
+	 */
+	p1 = r0;
+	r2.l = __stext;
+	r2.h = __stext;
+	r2 >>= 2;
+	p2 = r2;
+	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
+.L_clear_zero:
+	[p1++] = r0;
+
+	/* Pass the u-boot arguments to the global value command line */
+	R0 = R7;
+	call _cmdline_init;
+
+	/* Load the current thread pointer and stack */
+	sp.l = _init_thread_union;
+	sp.h = _init_thread_union;
+	p1 = THREAD_SIZE (z);
+	sp = sp + p1;
+	usp = sp;
+	fp = sp;
+	jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 7f752c87fe4..b27e59d3240 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -29,7 +29,7 @@
  */
 
 #include <asm/blackfin.h>
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
 #include <linux/linkage.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
@@ -37,7 +37,7 @@
 #include <asm/traps.h>
 #include <asm/thread_info.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 .extern _ret_from_exception
 
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index f5fd768022e..5fa536727c6 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -71,6 +71,7 @@ atomic_t num_spurious;
 
 #ifdef CONFIG_PM
 unsigned long bfin_sic_iwr[3];	/* Up to 3 SIC_IWRx registers */
+unsigned vr_wakeup;
 #endif
 
 struct ivgx {
@@ -184,17 +185,56 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 #ifdef CONFIG_PM
 int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
-	unsigned bank, bit;
+	unsigned bank, bit, wakeup = 0;
 	unsigned long flags;
 	bank = SIC_SYSIRQ(irq) / 32;
 	bit = SIC_SYSIRQ(irq) % 32;
 
+	switch (irq) {
+#ifdef IRQ_RTC
+	case IRQ_RTC:
+	wakeup |= WAKE;
+	break;
+#endif
+#ifdef IRQ_CAN0_RX
+	case IRQ_CAN0_RX:
+	wakeup |= CANWE;
+	break;
+#endif
+#ifdef IRQ_CAN1_RX
+	case IRQ_CAN1_RX:
+	wakeup |= CANWE;
+	break;
+#endif
+#ifdef IRQ_USB_INT0
+	case IRQ_USB_INT0:
+	wakeup |= USBWE;
+	break;
+#endif
+#ifdef IRQ_KEY
+	case IRQ_KEY:
+	wakeup |= KPADWE;
+	break;
+#endif
+#ifdef CONFIG_BF54x
+	case IRQ_CNT:
+	wakeup |= ROTWE;
+	break;
+#endif
+	default:
+	break;
+	}
+
 	local_irq_save(flags);
 
-	if (state)
+	if (state) {
 		bfin_sic_iwr[bank] |= (1 << bit);
-	else
+		vr_wakeup  |= wakeup;
+
+	} else {
 		bfin_sic_iwr[bank] &= ~(1 << bit);
+		vr_wakeup  &= ~wakeup;
+	}
 
 	local_irq_restore(flags);
 
@@ -459,6 +499,8 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
 	.unmask = bfin_gpio_unmask_irq,
+	.disable = bfin_gpio_mask_irq,
+	.enable = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
 	.shutdown = bfin_gpio_irq_shutdown,
@@ -846,6 +888,8 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
 	.unmask = bfin_gpio_unmask_irq,
+	.disable = bfin_gpio_mask_irq,
+	.enable = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
 	.shutdown = bfin_gpio_irq_shutdown,
@@ -939,6 +983,11 @@ int __init init_arch_irq(void)
 
 	local_irq_disable();
 
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+	/* Clear EMAC Interrupt Status bits so we can demux it later */
+	bfin_write_EMAC_SYSTAT(-1);
+#endif
+
 #ifdef CONFIG_BF54x
 # ifdef CONFIG_PINTx_REASSIGN
 	pint[0]->assign = CONFIG_PINT0_ASSIGN;
@@ -1024,13 +1073,22 @@ int __init init_arch_irq(void)
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
-	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
 # ifdef CONFIG_BF54x
-	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else
-	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
 	return 0;
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
index 30b887e67dd..9daf01201e9 100644
--- a/arch/blackfin/mach-common/lock.S
+++ b/arch/blackfin/mach-common/lock.S
@@ -28,13 +28,10 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/cplb.h>
 #include <asm/blackfin.h>
 
 .text
 
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-
 /* When you come here, it is assumed that
  * R0 - Which way to be locked
  */
@@ -189,18 +186,38 @@ ENTRY(_cache_lock)
 	RTS;
 ENDPROC(_cache_lock)
 
-#endif	/* BFIN_ICACHE_LOCK */
-
-/* Return the ILOC bits of IMEM_CONTROL
+/* Invalidate the Entire Instruction cache by
+ * disabling IMC bit
  */
+ENTRY(_invalidate_entire_icache)
+	[--SP] = ( R7:5);
 
-ENTRY(_read_iloc)
-	P1.H = HI(IMEM_CONTROL);
-	P1.L = LO(IMEM_CONTROL);
-	R1 = 0xF;
-	R0 = [P1];
-	R0 = R0 >> 3;
-	R0 = R0 & R1;
+	P0.L = LO(IMEM_CONTROL);
+	P0.H = HI(IMEM_CONTROL);
+	R7 = [P0];
+
+	/* Clear the IMC bit , All valid bits in the instruction
+	 * cache are set to the invalid state
+	 */
+	BITCLR(R7,IMC_P);
+	CLI R6;
+	SSYNC;		/* SSYNC required before invalidating cache. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
+
+	/* Configures the instruction cache agian */
+	R6 = (IMC | ENICPLB);
+	R7 = R7 | R6;
+
+	CLI R6;
+	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
+	.align 8;
+	[P0] = R7;
+	SSYNC;
+	STI R6;
 
+	( R7:5) = [SP++];
 	RTS;
-ENDPROC(_read_iloc)
+ENDPROC(_invalidate_entire_icache)
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 0be805ca423..e28c6af1f41 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -38,8 +38,9 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
-#include <asm/dpmc.h>
 #include <asm/gpio.h>
+#include <asm/dma.h>
+#include <asm/dpmc.h>
 
 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
 #define WAKEUP_TYPE	PM_WAKE_HIGH
@@ -61,16 +62,17 @@
 #define WAKEUP_TYPE	PM_WAKE_BOTH_EDGES
 #endif
 
+
 void bfin_pm_suspend_standby_enter(void)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_PM_WAKEUP_BY_GPIO
 	gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
 #endif
 
-	u32 flags;
-
 	local_irq_save(flags);
-	bfin_pm_setup();
+	bfin_pm_standby_setup();
 
 #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
 	sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
@@ -78,21 +80,203 @@ void bfin_pm_suspend_standby_enter(void)
 	sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
 #endif
 
-	bfin_pm_restore();
+	bfin_pm_standby_restore();
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
-	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
-	bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+	/* BF52x system reset does not properly reset SIC_IWR1 which
+	 * will screw up the bootrom as it relies on MDMA0/1 waking it
+	 * up from IDLE instructions.  See this report for more info:
+	 * http://blackfin.uclinux.org/gf/tracker/4323
+	 */
+	bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+	bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
 # ifdef CONFIG_BF54x
-	bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
 # endif
 #else
-	bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
 	local_irq_restore(flags);
 }
 
+int bf53x_suspend_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
+	dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
+			L1_DATA_A_LENGTH);
+	dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+			(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
+	memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
+			L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
+			L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+int bf53x_resume_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+	dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+			L1_DATA_A_LENGTH);
+	dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
+	memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+#ifdef CONFIG_BFIN_WB
+static void flushinv_all_dcache(void)
+{
+	u32 way, bank, subbank, set;
+	u32 status, addr;
+	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+	for (bank = 0; bank < 2; ++bank) {
+		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+			continue;
+
+		for (way = 0; way < 2; ++way)
+			for (subbank = 0; subbank < 4; ++subbank)
+				for (set = 0; set < 64; ++set) {
+
+					bfin_write_DTEST_COMMAND(
+						way << 26 |
+						bank << 23 |
+						subbank << 16 |
+						set << 5
+					);
+					CSYNC();
+					status = bfin_read_DTEST_DATA0();
+
+					/* only worry about valid/dirty entries */
+					if ((status & 0x3) != 0x3)
+						continue;
+
+					/* construct the address using the tag */
+					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+					/* flush it */
+					__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+				}
+	}
+}
+#endif
+
+static inline void dcache_disable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	unsigned long ctrl;
+
+#ifdef CONFIG_BFIN_WB
+	flushinv_all_dcache();
+#endif
+	SSYNC();
+	ctrl = bfin_read_DMEM_CONTROL();
+	ctrl &= ~ENDCPLB;
+	bfin_write_DMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void dcache_enable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_DMEM_CONTROL();
+	ctrl |= ENDCPLB;
+	bfin_write_DMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void icache_disable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_IMEM_CONTROL();
+	ctrl &= ~ENICPLB;
+	bfin_write_IMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void icache_enable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_IMEM_CONTROL();
+	ctrl |= ENICPLB;
+	bfin_write_IMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+int bfin_pm_suspend_mem_enter(void)
+{
+	unsigned long flags;
+	int wakeup, ret;
+
+	unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+					 + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
+					  GFP_KERNEL);
+
+	if (memptr == NULL) {
+		panic("bf53x_suspend_l1_mem malloc failed");
+		return -ENOMEM;
+	}
+
+	wakeup = bfin_read_VR_CTL() & ~FREQ;
+	wakeup |= SCKELOW;
+
+#ifdef CONFIG_PM_BFIN_WAKE_PH6
+	wakeup |= PHYWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_GP
+	wakeup |= GPWE;
+#endif
+
+	local_irq_save(flags);
+
+	ret = blackfin_dma_suspend();
+
+	if (ret) {
+		local_irq_restore(flags);
+		kfree(memptr);
+		return ret;
+	}
+
+	bfin_gpio_pm_hibernate_suspend();
+
+	dcache_disable();
+	icache_disable();
+	bf53x_suspend_l1_mem(memptr);
+
+	do_hibernate(wakeup | vr_wakeup);	/* Goodbye */
+
+	bf53x_resume_l1_mem(memptr);
+
+	icache_enable();
+	dcache_enable();
+
+	bfin_gpio_pm_hibernate_restore();
+	blackfin_dma_resume();
+
+	local_irq_restore(flags);
+	kfree(memptr);
+
+	return 0;
+}
+
 /*
  *	bfin_pm_valid - Tell the PM core that we only support the standby sleep
  *			state
@@ -101,7 +285,24 @@ void bfin_pm_suspend_standby_enter(void)
  */
 static int bfin_pm_valid(suspend_state_t state)
 {
-	return (state == PM_SUSPEND_STANDBY);
+	return (state == PM_SUSPEND_STANDBY
+#ifndef BF533_FAMILY
+	/*
+	 * On BF533/2/1:
+	 * If we enter Hibernate the SCKE Pin is driven Low,
+	 * so that the SDRAM enters Self Refresh Mode.
+	 * However when the reset sequence that follows hibernate
+	 * state is executed, SCKE is driven High, taking the
+	 * SDRAM out of Self Refresh.
+	 *
+	 * If you reconfigure and access the SDRAM "very quickly",
+	 * you are likely to avoid errors, otherwise the SDRAM
+	 * start losing its contents.
+	 * An external HW workaround is possible using logic gates.
+	 */
+	|| state == PM_SUSPEND_MEM
+#endif
+	);
 }
 
 /*
@@ -115,10 +316,9 @@ static int bfin_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_STANDBY:
 		bfin_pm_suspend_standby_enter();
 		break;
-
 	case PM_SUSPEND_MEM:
-		return -ENOTSUPP;
-
+		bfin_pm_suspend_mem_enter();
+		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 3246f91c7ba..4f5e887a0d9 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -41,215 +41,309 @@
 #include <asm/blackfin.h>
 #include "blackfin_sram.h"
 
-spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
-
-#if CONFIG_L1_MAX_PIECE < 16
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        16
-#endif
-
-#if CONFIG_L1_MAX_PIECE > 1024
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        1024
-#endif
-
-#define SRAM_SLT_NULL      0
-#define SRAM_SLT_FREE      1
-#define SRAM_SLT_ALLOCATED 2
+static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+static spinlock_t l2_sram_lock;
 
 /* the data structure for L1 scratchpad and DATA SRAM */
-struct l1_sram_piece {
+struct sram_piece {
 	void *paddr;
 	int size;
-	int flag;
 	pid_t pid;
+	struct sram_piece *next;
 };
 
-static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
 
 #if L1_DATA_A_LENGTH != 0
-static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
 #endif
 
 #if L1_DATA_B_LENGTH != 0
-static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
 #endif
 
 #if L1_CODE_LENGTH != 0
-static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
+#endif
+
+#if L2_LENGTH != 0
+static struct sram_piece free_l2_sram_head, used_l2_sram_head;
 #endif
 
+static struct kmem_cache *sram_piece_cache;
+
 /* L1 Scratchpad SRAM initialization function */
-void __init l1sram_init(void)
+static void __init l1sram_init(void)
 {
-	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
-	       L1_SCRATCH_LENGTH >> 10);
+	free_l1_ssram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_ssram_head.next) {
+		printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n");
+		return;
+	}
+
+	free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
+	free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
+	free_l1_ssram_head.next->pid = 0;
+	free_l1_ssram_head.next->next = NULL;
 
-	memset(&l1_ssram, 0x00, sizeof(l1_ssram));
-	l1_ssram[0].paddr = (void *)L1_SCRATCH_START;
-	l1_ssram[0].size = L1_SCRATCH_LENGTH;
-	l1_ssram[0].flag = SRAM_SLT_FREE;
+	used_l1_ssram_head.next = NULL;
 
 	/* mutex initialize */
 	spin_lock_init(&l1sram_lock);
+
+	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+	       L1_SCRATCH_LENGTH >> 10);
 }
 
-void __init l1_data_sram_init(void)
+static void __init l1_data_sram_init(void)
 {
 #if L1_DATA_A_LENGTH != 0
-	memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
-	l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START +
-					(_ebss_l1 - _sdata_l1);
-	l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
-	l1_data_A_sram[0].flag = SRAM_SLT_FREE;
-
-	printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n",
-	       L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10);
+	free_l1_data_A_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_A_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n");
+		return;
+	}
+
+	free_l1_data_A_sram_head.next->paddr =
+		(void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->size =
+		L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->pid = 0;
+	free_l1_data_A_sram_head.next->next = NULL;
+
+	used_l1_data_A_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
+		L1_DATA_A_LENGTH >> 10,
+		free_l1_data_A_sram_head.next->size >> 10);
 #endif
 #if L1_DATA_B_LENGTH != 0
-	memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
-	l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START +
-				(_ebss_b_l1 - _sdata_b_l1);
-	l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
-	l1_data_B_sram[0].flag = SRAM_SLT_FREE;
-
-	printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n",
-	       L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10);
+	free_l1_data_B_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_B_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n");
+		return;
+	}
+
+	free_l1_data_B_sram_head.next->paddr =
+		(void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->size =
+		L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->pid = 0;
+	free_l1_data_B_sram_head.next->next = NULL;
+
+	used_l1_data_B_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
+		L1_DATA_B_LENGTH >> 10,
+		free_l1_data_B_sram_head.next->size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_data_sram_lock);
 }
 
-void __init l1_inst_sram_init(void)
+static void __init l1_inst_sram_init(void)
 {
 #if L1_CODE_LENGTH != 0
-	memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
-	l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
-	l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
-	l1_inst_sram[0].flag = SRAM_SLT_FREE;
+	free_l1_inst_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_inst_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n");
+		return;
+	}
+
+	free_l1_inst_sram_head.next->paddr =
+		(void *)L1_CODE_START + (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->size =
+		L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->pid = 0;
+	free_l1_inst_sram_head.next->next = NULL;
 
-	printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n",
-	       L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10);
+	used_l1_inst_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
+		L1_CODE_LENGTH >> 10,
+		free_l1_inst_sram_head.next->size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_inst_sram_lock);
 }
 
-/* L1 memory allocate function */
-static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
+static void __init l2_sram_init(void)
 {
-	int i, index = 0;
-	void *addr = NULL;
+#if L2_LENGTH != 0
+	free_l2_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l2_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L2 SRAM.\n");
+		return;
+	}
+
+	free_l2_sram_head.next->paddr = (void *)L2_START +
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->size = L2_LENGTH -
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->pid = 0;
+	free_l2_sram_head.next->next = NULL;
+
+	used_l2_sram_head.next = NULL;
 
-	if (size <= 0)
+	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
+		L2_LENGTH >> 10,
+		free_l2_sram_head.next->size >> 10);
+#endif
+
+	/* mutex initialize */
+	spin_lock_init(&l2_sram_lock);
+}
+void __init bfin_sram_init(void)
+{
+	sram_piece_cache = kmem_cache_create("sram_piece_cache",
+				sizeof(struct sram_piece),
+				0, SLAB_PANIC, NULL);
+
+	l1sram_init();
+	l1_data_sram_init();
+	l1_inst_sram_init();
+	l2_sram_init();
+}
+
+/* SRAM allocate function */
+static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (size <= 0 || !pfree_head || !pused_head)
 		return NULL;
 
 	/* Align the size */
 	size = (size + 3) & ~3;
 
-	/* not use the good method to match the best slot !!! */
-	/* search an available memory slot */
-	for (i = 0; i < count; i++) {
-		if ((pfree[i].flag == SRAM_SLT_FREE)
-		    && (pfree[i].size >= size)) {
-			addr = pfree[i].paddr;
-			pfree[i].flag = SRAM_SLT_ALLOCATED;
-			pfree[i].pid = current->pid;
-			index = i;
-			break;
-		}
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && size > pslot->size) {
+		plast = pslot;
+		pslot = pslot->next;
 	}
-	if (i >= count)
+
+	if (!pslot)
 		return NULL;
 
-	/* updated the NULL memory slot !!! */
-	if (pfree[i].size > size) {
-		for (i = 0; i < count; i++) {
-			if (pfree[i].flag == SRAM_SLT_NULL) {
-				pfree[i].pid = 0;
-				pfree[i].flag = SRAM_SLT_FREE;
-				pfree[i].paddr = addr + size;
-				pfree[i].size = pfree[index].size - size;
-				pfree[index].size = size;
-				break;
-			}
-		}
+	if (pslot->size == size) {
+		plast->next = pslot->next;
+		pavail = pslot;
+	} else {
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+
+		if (!pavail)
+			return NULL;
+
+		pavail->paddr = pslot->paddr;
+		pavail->size = size;
+		pslot->paddr += size;
+		pslot->size -= size;
 	}
 
-	return addr;
+	pavail->pid = current->pid;
+
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* insert new piece into used piece list !!! */
+	while (pslot != NULL && pavail->paddr < pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	pavail->next = pslot;
+	plast->next = pavail;
+
+	return pavail->paddr;
 }
 
 /* Allocate the largest available block.  */
-static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
+static void *_sram_alloc_max(struct sram_piece *pfree_head,
+				struct sram_piece *pused_head,
 				unsigned long *psize)
 {
-	unsigned long best = 0;
-	int i, index = -1;
-	void *addr = NULL;
+	struct sram_piece *pslot, *pmax;
+
+	if (!pfree_head || !pused_head)
+		return NULL;
+
+	pmax = pslot = pfree_head->next;
 
-	/* search an available memory slot */
-	for (i = 0; i < count; i++) {
-		if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
-			addr = pfree[i].paddr;
-			index = i;
-			best = pfree[i].size;
-		}
+	/* search an available piece slot */
+	while (pslot != NULL) {
+		if (pslot->size > pmax->size)
+			pmax = pslot;
+		pslot = pslot->next;
 	}
-	if (index < 0)
+
+	if (!pmax)
 		return NULL;
-	*psize = best;
 
-	pfree[index].pid = current->pid;
-	pfree[index].flag = SRAM_SLT_ALLOCATED;
-	return addr;
+	*psize = pmax->size;
+
+	return _sram_alloc(*psize, pfree_head, pused_head);
 }
 
-/* L1 memory free function */
-static int _l1_sram_free(const void *addr,
-			struct l1_sram_piece *pfree,
-			int count)
+/* SRAM free function */
+static int _sram_free(const void *addr,
+			struct sram_piece *pfree_head,
+			struct sram_piece *pused_head)
 {
-	int i, index = 0;
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (!pfree_head || !pused_head)
+		return -1;
 
 	/* search the relevant memory slot */
-	for (i = 0; i < count; i++) {
-		if (pfree[i].paddr == addr) {
-			if (pfree[i].flag != SRAM_SLT_ALLOCATED) {
-				/* error log */
-				return -1;
-			}
-			index = i;
-			break;
-		}
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && pslot->paddr != addr) {
+		plast = pslot;
+		pslot = pslot->next;
 	}
-	if (i >= count)
+
+	if (!pslot)
 		return -1;
 
-	pfree[index].pid = 0;
-	pfree[index].flag = SRAM_SLT_FREE;
-
-	/* link the next address slot */
-	for (i = 0; i < count; i++) {
-		if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
-		    && (pfree[i].flag == SRAM_SLT_FREE)) {
-			pfree[i].pid = 0;
-			pfree[i].flag = SRAM_SLT_NULL;
-			pfree[index].size += pfree[i].size;
-			pfree[index].flag = SRAM_SLT_FREE;
-			break;
-		}
+	plast->next = pslot->next;
+	pavail = pslot;
+	pavail->pid = 0;
+
+	/* insert free pieces back to the free list */
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	while (pslot != NULL && addr > pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
+		plast->size += pavail->size;
+		kmem_cache_free(sram_piece_cache, pavail);
+	} else {
+		pavail->next = plast->next;
+		plast->next = pavail;
+		plast = pavail;
 	}
 
-	/* link the last address slot */
-	for (i = 0; i < count; i++) {
-		if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) &&
-		    (pfree[i].flag == SRAM_SLT_FREE)) {
-			pfree[index].flag = SRAM_SLT_NULL;
-			pfree[i].size += pfree[index].size;
-			break;
-		}
+	if (pslot && plast->paddr + plast->size == pslot->paddr) {
+		plast->size += pslot->size;
+		plast->next = pslot->next;
+		kmem_cache_free(sram_piece_cache, pslot);
 	}
 
 	return 0;
@@ -273,6 +367,11 @@ int sram_free(const void *addr)
 		 && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
 		return l1_data_B_sram_free(addr);
 #endif
+#if L2_LENGTH != 0
+	else if (addr >= (void *)L2_START
+		 && addr < (void *)(L2_START + L2_LENGTH))
+		return l2_sram_free(addr);
+#endif
 	else
 		return -1;
 }
@@ -280,14 +379,15 @@ EXPORT_SYMBOL(sram_free);
 
 void *l1_data_A_sram_alloc(size_t size)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr = NULL;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	addr = _sram_alloc(size, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
 #endif
 
 	/* add mutex operation */
@@ -302,15 +402,15 @@ EXPORT_SYMBOL(l1_data_A_sram_alloc);
 
 int l1_data_A_sram_free(const void *addr)
 {
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	ret = _l1_sram_free(addr,
-			   l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	ret = _sram_free(addr, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
 #else
 	ret = -1;
 #endif
@@ -325,13 +425,14 @@ EXPORT_SYMBOL(l1_data_A_sram_free);
 void *l1_data_B_sram_alloc(size_t size)
 {
 #if L1_DATA_B_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	addr = _sram_alloc(size, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -349,13 +450,14 @@ EXPORT_SYMBOL(l1_data_B_sram_alloc);
 int l1_data_B_sram_free(const void *addr)
 {
 #if L1_DATA_B_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	ret = _sram_free(addr, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -402,13 +504,14 @@ EXPORT_SYMBOL(l1_data_sram_free);
 void *l1_inst_sram_alloc(size_t size)
 {
 #if L1_CODE_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	addr = _sram_alloc(size, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -426,13 +529,14 @@ EXPORT_SYMBOL(l1_inst_sram_alloc);
 int l1_inst_sram_free(const void *addr)
 {
 #if L1_CODE_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	ret = _sram_free(addr, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -447,13 +551,14 @@ EXPORT_SYMBOL(l1_inst_sram_free);
 /* L1 Scratchpad memory allocate function */
 void *l1sram_alloc(size_t size)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram));
+	addr = _sram_alloc(size, &free_l1_ssram_head,
+			&used_l1_ssram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -464,13 +569,14 @@ void *l1sram_alloc(size_t size)
 /* L1 Scratchpad memory allocate function */
 void *l1sram_alloc_max(size_t *psize)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize);
+	addr = _sram_alloc_max(&free_l1_ssram_head,
+			&used_l1_ssram_head, psize);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -481,13 +587,14 @@ void *l1sram_alloc_max(size_t *psize)
 /* L1 Scratchpad memory free function */
 int l1sram_free(const void *addr)
 {
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram));
+	ret = _sram_free(addr, &free_l1_ssram_head,
+			&used_l1_ssram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -495,6 +602,64 @@ int l1sram_free(const void *addr)
 	return ret;
 }
 
+void *l2_sram_alloc(size_t size)
+{
+#if L2_LENGTH != 0
+	unsigned long flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_alloc);
+
+void *l2_sram_zalloc(size_t size)
+{
+	void *addr = l2_sram_alloc(size);
+
+	if (addr)
+		memset(addr, 0x00, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l2_sram_zalloc);
+
+int l2_sram_free(const void *addr)
+{
+#if L2_LENGTH != 0
+	unsigned long flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_free);
+
 int sram_free_with_lsl(const void *addr)
 {
 	struct sram_list_struct *lsl, **tmp;
@@ -533,6 +698,9 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags)
 	if (addr == NULL && (flags & L1_DATA_B_SRAM))
 		addr = l1_data_B_sram_alloc(size);
 
+	if (addr == NULL && (flags & L2_SRAM))
+		addr = l2_sram_alloc(size);
+
 	if (addr == NULL) {
 		kfree(lsl);
 		return NULL;
@@ -549,49 +717,80 @@ EXPORT_SYMBOL(sram_alloc_with_lsl);
 /* Once we get a real allocator, we'll throw all of this away.
  * Until then, we need some sort of visibility into the L1 alloc.
  */
-static void _l1sram_proc_read(char *buf, int *len, const char *desc,
-		struct l1_sram_piece *pfree, const int array_size)
+/* Need to keep line of output the same.  Currently, that is 44 bytes
+ * (including newline).
+ */
+static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
+		struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
 {
-	int i;
-
-	*len += sprintf(&buf[*len], "--- L1 %-14s Size  PID State\n", desc);
-	for (i = 0; i < array_size; ++i) {
-		const char *alloc_type;
-		switch (pfree[i].flag) {
-		case SRAM_SLT_NULL:      alloc_type = "NULL"; break;
-		case SRAM_SLT_FREE:      alloc_type = "FREE"; break;
-		case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break;
-		default:                 alloc_type = "????"; break;
-		}
-		*len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n",
-			pfree[i].paddr, pfree[i].paddr + pfree[i].size,
-			pfree[i].size, pfree[i].pid, alloc_type);
+	struct sram_piece *pslot;
+
+	if (!pfree_head || !pused_head)
+		return -1;
+
+	*len += sprintf(&buf[*len], "--- SRAM %-14s Size   PID State     \n", desc);
+
+	/* search the relevant memory slot */
+	pslot = pused_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "ALLOCATED");
+
+		pslot = pslot->next;
 	}
+
+	pslot = pfree_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "FREE");
+
+		pslot = pslot->next;
+	}
+
+	return 0;
 }
-static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
+static int sram_proc_read(char *buf, char **start, off_t offset, int count,
 		int *eof, void *data)
 {
 	int len = 0;
 
-	_l1sram_proc_read(buf, &len, "Scratchpad",
-			l1_ssram, ARRAY_SIZE(l1_ssram));
+	if (_sram_proc_read(buf, &len, count, "Scratchpad",
+			&free_l1_ssram_head, &used_l1_ssram_head))
+		goto not_done;
 #if L1_DATA_A_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Data A",
-			l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Data A",
+			&free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head))
+		goto not_done;
 #endif
 #if L1_DATA_B_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Data B",
-			l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Data B",
+			&free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head))
+		goto not_done;
 #endif
 #if L1_CODE_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Instruction",
-			l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Instruction",
+			&free_l1_inst_sram_head, &used_l1_inst_sram_head))
+		goto not_done;
+#endif
+#if L2_LENGTH != 0
+	if (_sram_proc_read(buf, &len, count, "L2",
+			&free_l2_sram_head, &used_l2_sram_head))
+		goto not_done;
 #endif
 
+	*eof = 1;
+ not_done:
 	return len;
 }
 
-static int __init l1sram_proc_init(void)
+static int __init sram_proc_init(void)
 {
 	struct proc_dir_entry *ptr;
 	ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
@@ -600,8 +799,8 @@ static int __init l1sram_proc_init(void)
 		return -1;
 	}
 	ptr->owner = THIS_MODULE;
-	ptr->read_proc = l1sram_proc_read;
+	ptr->read_proc = sram_proc_read;
 	return 0;
 }
-late_initcall(l1sram_proc_init);
+late_initcall(sram_proc_init);
 #endif
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index 0fb73b78dd6..8cb0945563f 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -30,9 +30,7 @@
 #ifndef __BLACKFIN_SRAM_H__
 #define __BLACKFIN_SRAM_H__
 
-extern void l1sram_init(void);
-extern void l1_inst_sram_init(void);
-extern void l1_data_sram_init(void);
+extern void bfin_sram_init(void);
 extern void *l1sram_alloc(size_t);
 
 #endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index ec3141fefd2..bc240abb874 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -53,33 +53,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
@@ -164,11 +137,14 @@ void __init mem_init(void)
 		"(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n",
 		(unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
 		initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
+}
+
+static int __init sram_init(void)
+{
+	unsigned long tmp;
 
 	/* Initialize the blackfin L1 Memory. */
-	l1sram_init();
-	l1_data_sram_init();
-	l1_inst_sram_init();
+	bfin_sram_init();
 
 	/* Allocate this once; never free it.  We assume this gives us a
 	   pointer to the start of L1 scratchpad memory; panic if it
@@ -179,7 +155,10 @@ void __init mem_init(void)
 			tmp, (unsigned long)L1_SCRATCH_TASK_INFO);
 		panic("No L1, time to give up\n");
 	}
+
+	return 0;
 }
+pure_initcall(sram_init);
 
 static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
index 20c83a53caf..21720301443 100644
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/arch-v10/boot/Makefile
@@ -2,7 +2,6 @@
 # arch/cris/arch-v10/boot/Makefile
 #
 
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 subdir- := compressed rescue
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
index 4a031cb27eb..08d943ce4be 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -2,12 +2,10 @@
 # arch/cris/arch-v10/boot/compressed/Makefile
 #
 
-CC = gcc-cris -melf $(LINUXINCLUDE)
-ccflags-y += -O2
-LD = ld-cris
-ldflags-y += -T $(obj)/decompress.ld
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
 OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -21,12 +19,6 @@ $(obj)/decompress.o: $(OBJECTS) FORCE
 $(obj)/decompress.bin: $(obj)/decompress.o FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/head.o: $(obj)/head.S .config
-	@$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-
-$(obj)/misc.o: $(obj)/misc.c .config
-	@$(CC) -D__KERNEL__ -c $< -o $@
-
 $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
 	$(call if_changed,image)
 
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.ld b/arch/cris/arch-v10/boot/compressed/decompress.ld
index 0b0a14fe617..e80f4594d54 100644
--- a/arch/cris/arch-v10/boot/compressed/decompress.ld
+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
@@ -1,4 +1,5 @@
-OUTPUT_FORMAT(elf32-us-cris)
+/* OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_FORMAT(elf32-cris)
 
 MEMORY 
 	{
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
index 610bdb23755..981fbae8495 100644
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -15,77 +15,77 @@
 #define COMMAND_LINE_MAGIC 0x87109563
 
 	;; Exported symbols
-	
-	.globl	_input_data
 
-	
+	.globl	input_data
+
+
 	.text
 
 	nop
 	di
 
 ;; We need to initialze DRAM registers before we start using the DRAM
-	
-	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
+
+	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
 	beq	dram_init_finished
 	nop
-	
+
 #include "../../lib/dram_init.S"
-	
-dram_init_finished:	
-		
+
+dram_init_finished:
+
 	;; Initiate the PA and PB ports
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-	move.b   r0, [R_PORT_PA_DATA]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+	move.b   $r0, [R_PORT_PA_DATA]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-	move.b   r0, [R_PORT_PA_DIR]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+	move.b   $r0, [R_PORT_PA_DIR]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-	move.b   r0, [R_PORT_PB_DATA]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+	move.b   $r0, [R_PORT_PB_DATA]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-	move.b   r0, [R_PORT_PB_DIR]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+	move.b   $r0, [R_PORT_PB_DIR]
 
 	;; Setup the stack to a suitably high address.
 	;; We assume 8 MB is the minimum DRAM in an eLinux
 	;; product and put the sp at the top for now.
 
-	move.d	0x40800000, sp
+	move.d	0x40800000, $sp
 
 	;; Figure out where the compressed piggyback image is
 	;; in the flash (since we wont try to copy it to DRAM
 	;; before unpacking). It is at _edata, but in flash.
 	;; Use (_edata - basse) as offset to the current PC.
-	
-basse:	move.d	pc, r5
-	and.d	0x7fffffff, r5	; strip any non-cache bit
-	subq	2, r5		; compensate for the move.d pc instr
-	move.d	r5, r0		; save for later - flash address of 'basse'
-	add.d	_edata, r5
-	sub.d	basse, r5	; r5 = flash address of '_edata'
-	
+
+basse:	move.d	$pc, $r5
+	and.d	0x7fffffff, $r5	; strip any non-cache bit
+	subq	2, $r5		; compensate for the move.d $pc instr
+	move.d	$r5, $r0		; save for later - flash address of 'basse'
+	add.d	_edata, $r5
+	sub.d	basse, $r5	; $r5 = flash address of '_edata'
+
 	;; Copy text+data to DRAM
-	
-	move.d	basse, r1	; destination
-	move.d	_edata, r2	; end destination
-1:	move.w	[r0+], r3
-	move.w	r3, [r1+]
-	cmp.d	r2, r1
+
+	move.d	basse, $r1	; destination
+	move.d	_edata, $r2	; end destination
+1:	move.w	[$r0+], $r3
+	move.w	$r3, [$r1+]
+	cmp.d	$r2, $r1
 	bcs	1b
 	nop
 
-	move.d	r5, [_input_data] ; for the decompressor
+	move.d	$r5, [input_data] ; for the decompressor
 
 
 	;; Clear the decompressors BSS (between _edata and _end)
-	
-	moveq	0, r0
-	move.d	_edata, r1
-	move.d	_end, r2
-1:	move.w	r0, [r1+]
-	cmp.d	r2, r1
+
+	moveq	0, $r0
+	move.d	_edata, $r1
+	move.d	_end, $r2
+1:	move.w	$r0, [$r1+]
+	cmp.d	$r2, $r1
 	bcs	1b
 	nop
 
@@ -94,16 +94,16 @@ basse:	move.d	pc, r5
 	move.d  $r10, [$r12]
 	move.d	_cmd_line_addr, $r12
 	move.d  $r11, [$r12]
-	
-	;; Do the decompression and save compressed size in _inptr
 
-	jsr	_decompress_kernel
-	
-	;; Put start address of root partition in r9 so the kernel can use it
+	;; Do the decompression and save compressed size in inptr
+
+	jsr	decompress_kernel
+
+	;; Put start address of root partition in $r9 so the kernel can use it
 	;; when mounting from flash
 
-	move.d	[_input_data], r9	; flash address of compressed kernel
-	add.d	[_inptr], r9		; size of compressed kernel
+	move.d	[input_data], $r9	; flash address of compressed kernel
+	add.d	[inptr], $r9		; size of compressed kernel
 
 	;; Restore command line magic and address.
 	move.d  _cmd_line_magic, $r10
@@ -112,12 +112,12 @@ basse:	move.d	pc, r5
 	move.d  [$r11], $r11
 
 	;; Enter the decompressed kernel
-	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
+	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
 	jump	0x40004000	; kernel is linked to this address
-	
+
 	.data
 
-_input_data:
+input_data:
 	.dword	0		; used by the decompressor
 _cmd_line_magic:
 	.dword 0
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
index 9a43ab19391..d933c89889d 100644
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -29,12 +29,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -62,79 +60,57 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]	
-	
+#define get_byte() (inbuf[inptr++])
+
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
-static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
 static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
- 
-static void *malloc(int size);
-static void free(void *where);
-static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
- 
 static void puts(const char *);
 
 /* the "heap" is put directly after the BSS ends, at end */
-  
-extern int end;
-static long free_mem_ptr = (long)&end;
- 
-#include "../../../../../lib/inflate.c"
-
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
 
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
+#include "../../../../../lib/inflate.c"
 
 /* decompressor info and error messages to serial console */
 
@@ -142,44 +118,47 @@ static void
 puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while(*s) {
+	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while(!(*R_SERIAL0_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
 		*R_SERIAL0_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while(!(*R_SERIAL1_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
 		*R_SERIAL1_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while(!(*R_SERIAL2_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
 		*R_SERIAL2_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while(!(*R_SERIAL3_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
 		*R_SERIAL3_TR_DATA = *s++;
 #endif
 	}
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
-	char *ss = (char*)s;
+	char *ss = (char *)s;
 
-	for (i=0;i<n;i++) ss[i] = c;
+	for (i = 0; i < n; i++)
+		ss[i] = c;
+
+	return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i;
 	char *d = (char *)__dest, *s = (char *)__src;
 
-	for (i=0;i<__n;i++) d[i] = s[i];
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
+
+	return __dest;
 }
 
 /* ===========================================================================
@@ -187,46 +166,44 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-    
-    in = window;
-    out = &output_data[output_ptr]; 
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
 	puts("\n\n");
 	puts(x);
 	puts("\n\n -- System halted\n");
 
-	while(1);	/* Halt */
+	while (1);	/* Halt */
 }
 
-void
-setup_normal_output_buffer()
+void setup_normal_output_buffer(void)
 {
 	output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-void
-decompress_kernel()
+void decompress_kernel(void)
 {
 	char revision;
-	
+
 	/* input_data is set in head.S */
 	inbuf = input_data;
 
@@ -257,11 +234,10 @@ decompress_kernel()
 
 	makecrc();
 
-	__asm__ volatile ("move vr,%0" : "=rm" (revision));
-	if (revision < 10)
-	{
+	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
+	if (revision < 10) {
 		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while(1);
+		while (1);
 	}
 
 	puts("Uncompressing Linux...\n");
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
index 2e5045b9e19..07688da9270 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -2,12 +2,9 @@
 # Makefile for rescue (bootstrap) code
 #
 
-CC = gcc-cris -mlinux $(LINUXINCLUDE)
-ccflags-y += -O2
-asflags-y += -traditional
-LD = gcc-cris -mlinux -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
-OBJCOPY = objcopy-cris
+ccflags-y += -O2 $(LINUXINCLUDE)
+asflags-y += $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 52103d16dc6..8769dc91407 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -233,7 +233,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 
 		if (copy_to_user((struct rtc_time *) arg, &tm,
 				 sizeof tm)) {
-			spin_unlock(&rtc_lock);
+			mutex_unlock(&rtc_lock);
 			return -EFAULT;
 		}
 
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
index 04d5eee2c90..3dc6e91ba39 100644
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -426,12 +426,18 @@ static int dummy_write(struct tty_struct * tty,
 	return count;
 }
 
-static int
-dummy_write_room(struct tty_struct *tty)
+static int dummy_write_room(struct tty_struct *tty)
 {
 	return 8192;
 }
 
+static const struct tty_operations dummy_ops = {
+	.open = dummy_open,
+	.close = dummy_close,
+	.write = dummy_write,
+	.write_room = dummy_write_room,
+};
+
 void __init
 init_dummy_console(void)
 {
@@ -444,14 +450,14 @@ init_dummy_console(void)
 	dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
 	dummy_driver.subtype = SERIAL_TYPE_NORMAL;
 	dummy_driver.init_termios = tty_std_termios;
+	/* Normally B9600 default... */
 	dummy_driver.init_termios.c_cflag =
-		B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+		B115200 | CS8 | CREAD | HUPCL | CLOCAL;
 	dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	dummy_driver.init_termios.c_ispeed = 115200;
+	dummy_driver.init_termios.c_ospeed = 115200;
 
-	dummy_driver.open = dummy_open;
-	dummy_driver.close = dummy_close;
-	dummy_driver.write = dummy_write;
-	dummy_driver.write_room = dummy_write_room;
+	dummy_driver.ops = &dummy_ops;
 	if (tty_register_driver(&dummy_driver))
 		panic("Couldn't register dummy serial driver\n");
 }
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index a3ca5515074..6fea45f2e40 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -278,14 +278,6 @@ void putDebugChar (int val);
 
 void enableDebugIRQ (void);
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex (int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex (int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex (char ch);
 
@@ -356,9 +348,6 @@ extern unsigned char executing_task;
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char remcomInBuffer[BUFMAX];
 static char remcomOutBuffer[BUFMAX];
@@ -499,8 +488,8 @@ gdb_cris_strtol (const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 	
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
         
         if (endptr)
         {
@@ -670,22 +659,6 @@ read_register (char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex (char ch)
@@ -721,8 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
                 for (i = 0; i < count; i++) {
                         ch = *mem++;
-                        *buf++ = highhex (ch);
-                        *buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
                 }
         }
         
@@ -857,9 +829,9 @@ putpacket(char *buffer)
 				src++;
 			}
 		}
-		putDebugChar ('#');
-		putDebugChar (highhex (checksum));
-		putDebugChar (lowhex (checksum));
+		putDebugChar('#');
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -895,9 +867,8 @@ stub_is_stopped(int sigval)
         
 	/* Send trap type (converted to signal) */
 
-	*ptr++ = 'T';	
-	*ptr++ = highhex (sigval);
-	*ptr++ = lowhex (sigval);
+	*ptr++ = 'T';
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send register contents. We probably only need to send the
 	 * PC, frame pointer and stack pointer here. Other registers will be
@@ -910,9 +881,7 @@ stub_is_stopped(int sigval)
                 status = read_register (regno, &reg_cont);
                 
 		if (status == SUCCESS) {
-                        
-                        *ptr++ = highhex (regno);
-                        *ptr++ = lowhex (regno);
+			ptr = pack_hex_byte(ptr, regno);
                         *ptr++ = ':';
 
                         ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
@@ -937,8 +906,8 @@ stub_is_stopped(int sigval)
 	/* Store thread:r...; with the executing task TID. */
 	gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:");
 	pos += gdb_cris_strlen ("thread:");
-	remcomOutBuffer[pos++] = highhex (executing_task);
-	remcomOutBuffer[pos++] = lowhex (executing_task);
+	remcomOutBuffer[pos++] = hex_asc_hi(executing_task);
+	remcomOutBuffer[pos++] = hex_asc_lo(executing_task);
 	gdb_cris_strcpy (&remcomOutBuffer[pos], ";");
 #endif
 
@@ -1126,8 +1095,8 @@ handle_exception (int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				remcomOutBuffer[0] = 'S';
-				remcomOutBuffer[1] = highhex (sigval);
-				remcomOutBuffer[2] = lowhex (sigval);
+				remcomOutBuffer[1] = hex_asc_hi(sigval);
+				remcomOutBuffer[2] = hex_asc_lo(sigval);
 				remcomOutBuffer[3] = 0;
 				break;
 				
@@ -1224,23 +1193,23 @@ handle_exception (int sigval)
 						case 'C':
 							/* Identify the remote current thread. */
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QC");
-							remcomOutBuffer[2] = highhex (current_thread_c);
-							remcomOutBuffer[3] = lowhex (current_thread_c);
+							remcomOutBuffer[2] = hex_asc_hi(current_thread_c);
+							remcomOutBuffer[3] = hex_asc_lo(current_thread_c);
 							remcomOutBuffer[4] = '\0';
 							break;
 						case 'L':
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QM");
 							/* Reply with number of threads. */
 							if (os_is_started()) {
-								remcomOutBuffer[2] = highhex (number_of_tasks);
-								remcomOutBuffer[3] = lowhex (number_of_tasks);
+								remcomOutBuffer[2] = hex_asc_hi(number_of_tasks);
+								remcomOutBuffer[3] = hex_asc_lo(number_of_tasks);
 							}
 							else {
-								remcomOutBuffer[2] = highhex (0);
-								remcomOutBuffer[3] = lowhex (1);
+								remcomOutBuffer[2] = hex_asc_hi(0);
+								remcomOutBuffer[3] = hex_asc_lo(1);
 							}
 							/* Done with the reply. */
-							remcomOutBuffer[4] = lowhex (1);
+							remcomOutBuffer[4] = hex_asc_lo(1);
 							pos = 5;
 							/* Expects the argument thread id. */
 							for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++)
@@ -1251,16 +1220,16 @@ handle_exception (int sigval)
 								for (thread_id = 0; thread_id < number_of_tasks; thread_id++) {
 									nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 									for (; pos < nextpos; pos ++)
-										remcomOutBuffer[pos] = lowhex (0);
-									remcomOutBuffer[pos++] = lowhex (thread_id);
+										remcomOutBuffer[pos] = hex_asc_lo(0);
+									remcomOutBuffer[pos++] = hex_asc_lo(thread_id);
 								}
 							}
 							else {
 								/* Store the thread identifier of the boot task. */
 								nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 								for (; pos < nextpos; pos ++)
-									remcomOutBuffer[pos] = lowhex (0);
-								remcomOutBuffer[pos++] = lowhex (current_thread_c);
+									remcomOutBuffer[pos] = hex_asc_lo(0);
+								remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c);
 							}
 							remcomOutBuffer[pos] = '\0';
 							break;
diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c
index e0fcd1a9bfd..742fd1974c2 100644
--- a/arch/cris/arch-v10/mm/init.c
+++ b/arch/cris/arch-v10/mm/init.c
@@ -182,7 +182,7 @@ paging_init(void)
 	 * mem_map page array.
 	 */
 
-	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 }
 
 /* Initialize remaps of some I/O-ports. It is important that this
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
index 3f91349c5f1..99896ad60b3 100644
--- a/arch/cris/arch-v32/boot/Makefile
+++ b/arch/cris/arch-v32/boot/Makefile
@@ -2,7 +2,6 @@
 # arch/cris/arch-v32/boot/Makefile
 #
 
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary -R .note -R .comment
 
 subdir- := compressed rescue
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
index 2c8c2c3039c..d6335f26083 100644
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ b/arch/cris/arch-v32/boot/compressed/Makefile
@@ -2,14 +2,10 @@
 # arch/cris/arch-v32/boot/compressed/Makefile
 #
 
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
 asflags-y += -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
 ccflags-y += -O2 -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/decompress.ld
-obj-y = head.o misc.o
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
 OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
index 55b2695c5d7..3595e16e82b 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/arch-v32/boot/compressed/misc.c
@@ -89,20 +89,14 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
-static long bytes_out = 0;
+static long bytes_out;
 static uch *output_data;
-static unsigned long output_ptr = 0;
+static unsigned long output_ptr;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -110,37 +104,10 @@ static void puts(const char *);
 
 extern int _end;
 static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
 #include "../../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* decompressor info and error messages to serial console */
 
 static inline void
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
index c0987795dcb..44ae0ad61f9 100644
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ b/arch/cris/arch-v32/boot/rescue/Makefile
@@ -7,9 +7,8 @@ ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
 		-I $(srctree)/include/asm/arch
 asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
 LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
 LDPOSTFLAGS = -lgcc
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 2a92cb1886c..7a64fcef9d0 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -641,6 +641,7 @@ config PCI
        bool
        depends on ETRAX_CARDBUS
        default y
+       select HAVE_GENERIC_DMA_COHERENT
 
 config ETRAX_IOP_FW_LOAD
 	tristate "IO-processor hotplug firmware loading support"
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index 53db3870ba0..f263ab57122 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -229,7 +229,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 
 		if (copy_to_user((struct rtc_time *) arg, &tm,
 				 sizeof tm)) {
-			spin_unlock(&rtc_lock);
+			mutex_unlock(&rtc_lock);
 			return -EFAULT;
 		}
 
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index e0364654fc4..fbe65954ee6 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -15,35 +15,16 @@
 #include <linux/pci.h>
 #include <asm/io.h>
 
-struct dma_coherent_mem {
-	void		*virt_base;
-	u32		device_base;
-	int		size;
-	int		flags;
-	unsigned long	*bitmap;
-};
-
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
 
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
 
 	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
 		gfp |= GFP_DMA;
@@ -60,90 +41,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t dma_handle)
 {
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else
+	if (!dma_release_from_coherent(dev, order, vaddr))
 		free_pages((unsigned long)vaddr, order);
 }
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto iounmap_out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- iounmap_out:
-	iounmap(mem_base);
- out:
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if(!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index 2de9d5849ef..111caa1a2ef 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -19,8 +19,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 
-#include <linux/version.h>
-
 #include <hwregs/reg_map.h>
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/timer_defs.h>
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 4e2e2e271ef..8bd5a5bc0dc 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -398,14 +398,6 @@ void putDebugChar(int val)
 }
 #endif
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex(int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex(int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 
@@ -464,9 +456,6 @@ void breakpoint(void);
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char input_buffer[BUFMAX];
 static char output_buffer[BUFMAX];
@@ -550,8 +539,8 @@ gdb_cris_strtol(const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
 
         if (endptr) {
                 /* Unconverted suffix is stored in endptr unless endptr is NULL. */
@@ -655,22 +644,6 @@ read_register(char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex(char ch)
@@ -704,8 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
 		for (i = 0; i < count; i++) {
 			ch = *mem++;
-			*buf++ = highhex (ch);
-			*buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
 		}
         }
         /* Terminate properly. */
@@ -723,8 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
 	mem += count - 1;
 	for (i = 0; i < count; i++) {
 		ch = *mem--;
-		*buf++ = highhex (ch);
-		*buf++ = lowhex (ch);
+		buf = pack_hex_byte(buf, ch);
         }
 
         /* Terminate properly. */
@@ -862,8 +833,8 @@ putpacket(char *buffer)
 			}
 		}
 		putDebugChar('#');
-		putDebugChar(highhex (checksum));
-		putDebugChar(lowhex (checksum));
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -909,8 +880,7 @@ stub_is_stopped(int sigval)
 	/* Send trap type (converted to signal) */
 
 	*ptr++ = 'T';
-	*ptr++ = highhex(sigval);
-	*ptr++ = lowhex(sigval);
+	ptr = pack_hex_byte(ptr, sigval);
 
 	if (((reg.exs & 0xff00) >> 8) == 0xc) {
 
@@ -1018,30 +988,26 @@ stub_is_stopped(int sigval)
 	}
 	/* Only send PC, frame and stack pointer. */
 	read_register(PC, &reg_cont);
-	*ptr++ = highhex(PC);
-	*ptr++ = lowhex(PC);
+	ptr = pack_hex_byte(PC);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
 	*ptr++ = ';';
 
 	read_register(R8, &reg_cont);
-	*ptr++ = highhex(R8);
-	*ptr++ = lowhex(R8);
+	ptr = pack_hex_byte(R8);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
 	*ptr++ = ';';
 
 	read_register(SP, &reg_cont);
-	*ptr++ = highhex(SP);
-	*ptr++ = lowhex(SP);
+	ptr = pack_hex_byte(SP);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
 	*ptr++ = ';';
 
 	/* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-        *ptr++ = highhex(ERP);
-        *ptr++ = lowhex(ERP);
+	ptr = pack_hex_byte(ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';
@@ -1533,8 +1499,8 @@ handle_exception(int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				output_buffer[0] = 'S';
-				output_buffer[1] = highhex(sigval);
-				output_buffer[2] = lowhex(sigval);
+				output_buffer[1] = hex_asc_hi(sigval);
+				output_buffer[2] = hex_asc_lo(sigval);
 				output_buffer[3] = 0;
 				break;
 
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index 5a9ac583464..8a34b8b7429 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -162,7 +162,7 @@ paging_init(void)
 	 * substantially higher than 0, like us (we start at PAGE_OFFSET). This
 	 * saves space in the mem_map page array.
 	 */
-	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 
 	mem_map = contig_page_data.node_mem_map;
 }
diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index 44f7b4f7947..9aa571169bc 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -35,19 +35,16 @@ read_cris_profile(struct file *file, char __user *buf,
 		  size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
+	ssize_t ret;
 
-	if (p > SAMPLE_BUFFER_SIZE)
-		return 0;
+	ret = simple_read_from_buffer(buf, count, ppos, sample_buffer,
+						SAMPLE_BUFFER_SIZE);
+	if (ret < 0)
+		return ret;
 
-	if (p + count > SAMPLE_BUFFER_SIZE)
-		count = SAMPLE_BUFFER_SIZE - p;
-	if (copy_to_user(buf, sample_buffer + p,count))
-		return -EFAULT;
+	memset(sample_buffer + p, 0, ret);
 
-	memset(sample_buffer + p, 0, count);
-	*ppos += count;
-
-	return count;
+	return ret;
 }
 
 static ssize_t
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index 5b06ffa15e3..2fdd212eb25 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -19,36 +19,6 @@ unsigned long empty_zero_page;
 extern char _stext, _edata, _etext; /* From linkerscript */
 extern char __init_begin, __init_end;
 
-void 
-show_mem(void)
-{
-	int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0;
-	int shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else if (page_count(mem_map+i) == 1)
-			nonshared++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages nonshared\n",nonshared);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 void __init
 mem_init(void)
 {
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index b8a4b94779b..99060ab507e 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1519,6 +1519,11 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
-
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 48a0393e7ce..7ca8a6b19ac 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -182,8 +182,6 @@ extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_excep
 static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 static const char *regnames[] = {
 	"PSR ", "ISR ", "CCR ", "CCCR",
 	"LR  ", "LCR ", "PC  ", "_stt",
@@ -383,8 +381,8 @@ static int gdbstub_send_packet(char *buffer)
 		}
 
 		gdbstub_tx_char('#');
-		gdbstub_tx_char(hexchars[checksum >> 4]);
-		gdbstub_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_tx_char(hex_asc_hi(checksum));
+		gdbstub_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_rx_char(&ch,0),
 #ifdef GDBSTUB_DEBUG_PROTOCOL
@@ -674,8 +672,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&1 && count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -683,10 +680,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&3 && count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -694,14 +689,10 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	while (count>=4) {
 		if (!gdbstub_read_dword(mem,(uint32_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -709,10 +700,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -720,8 +709,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1471,22 +1459,22 @@ void gdbstub(int sigval)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1,0);
 
-		hx = hexchars[(brr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1500,12 +1488,10 @@ void gdbstub(int sigval)
 
 	/* Send trap type (converted to signal) */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send Error PC */
-	*ptr++ = hexchars[GDB_REG_PC >> 4];
-	*ptr++ = hexchars[GDB_REG_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1513,8 +1499,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_FP >> 4];
-	*ptr++ = hexchars[GDB_REG_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1522,8 +1507,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send stack pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_SP >> 4];
-	*ptr++ = hexchars[GDB_REG_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1548,8 +1532,8 @@ void gdbstub(int sigval)
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -2059,8 +2043,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_tx_char('#');
-	gdbstub_tx_char(hexchars[checksum >> 4]);
-	gdbstub_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_tx_char(hex_asc_hi(checksum));
+	gdbstub_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_tx_char('-');
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 73f3aeefd20..d1113c5031f 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 9af7740f32f..1b851db3418 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -63,37 +63,6 @@ EXPORT_SYMBOL(empty_zero_page);
 
 /*****************************************************************************/
 /*
- *
- */
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		struct page *page = &mem_map[i];
-
-		total++;
-		if (PageReserved(page))
-			reserved++;
-		else if (!page_count(page))
-			free++;
-		else
-			shared += page_count(page) - 1;
-	}
-
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-
-} /* end show_mem() */
-
-/*****************************************************************************/
-/*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
  * The parameters are pointers to where to stick the starting and ending
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 085dc6ec152..396ab059efa 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -203,20 +203,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 source "drivers/char/pcmcia/Kconfig"
 
 source "drivers/serial/Kconfig"
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
index 845074588af..51ab6cbd030 100644
--- a/arch/h8300/boot/compressed/misc.c
+++ b/arch/h8300/boot/compressed/misc.c
@@ -67,8 +67,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -77,11 +75,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -98,38 +92,6 @@ static unsigned long free_mem_end_ptr;
 #define TDR *((volatile unsigned char *)0xffff8b)
 #define SSR *((volatile unsigned char *)0xffff8c)
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 int puts(const char *s)
 {
 	return 0;
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
new file mode 100644
index 00000000000..c68e1680da0
--- /dev/null
+++ b/arch/h8300/include/asm/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff --git a/arch/h8300/include/asm/a.out.h b/arch/h8300/include/asm/a.out.h
new file mode 100644
index 00000000000..ded780f0a49
--- /dev/null
+++ b/arch/h8300/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef __H8300_A_OUT_H__
+#define __H8300_A_OUT_H__
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* __H8300_A_OUT_H__ */
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
new file mode 100644
index 00000000000..b4cf0ea97ed
--- /dev/null
+++ b/arch/h8300/include/asm/atomic.h
@@ -0,0 +1,144 @@
+#ifndef __ARCH_H8300_ATOMIC__
+#define __ARCH_H8300_ATOMIC__
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+typedef struct { int counter; } atomic_t;
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+#include <asm/system.h>
+#include <linux/kernel.h>
+
+static __inline__ int atomic_add_return(int i, atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	ret = v->counter += i;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_add(i, v) atomic_add_return(i, v)
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ int atomic_sub_return(int i, atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	ret = v->counter -= i;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_sub(i, v) atomic_sub_return(i, v)
+#define atomic_sub_and_test(i,v) (atomic_sub_return(i, v) == 0)
+
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	v->counter++;
+	ret = v->counter;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_inc(v) atomic_inc_return(v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	--v->counter;
+	ret = v->counter;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_dec(v) atomic_dec_return(v)
+
+static __inline__ int atomic_dec_and_test(atomic_t *v)
+{
+	int ret,flags;
+	local_irq_save(flags);
+	--v->counter;
+	ret = v->counter;
+	local_irq_restore(flags);
+	return ret == 0;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = v->counter;
+	if (likely(ret == old))
+		v->counter = new;
+	local_irq_restore(flags);
+	return ret;
+}
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = v->counter;
+	if (ret != u)
+		v->counter += a;
+	local_irq_restore(flags);
+	return ret != u;
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("stc ccr,r1l\n\t"
+	                     "orc #0x80,ccr\n\t"
+	                     "mov.l %0,er0\n\t"
+	                     "and.l %1,er0\n\t"
+	                     "mov.l er0,%0\n\t"
+	                     "ldc r1l,ccr" 
+                             : "=m" (*v) : "g" (~(mask)) :"er0","er1");
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("stc ccr,r1l\n\t"
+	                     "orc #0x80,ccr\n\t"
+	                     "mov.l %0,er0\n\t"
+	                     "or.l %1,er0\n\t"
+	                     "mov.l er0,%0\n\t"
+	                     "ldc r1l,ccr" 
+                             : "=m" (*v) : "g" (mask) :"er0","er1");
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* __ARCH_H8300_ATOMIC __ */
diff --git a/arch/h8300/include/asm/auxvec.h b/arch/h8300/include/asm/auxvec.h
new file mode 100644
index 00000000000..1d36fe38b08
--- /dev/null
+++ b/arch/h8300/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMH8300_AUXVEC_H
+#define __ASMH8300_AUXVEC_H
+
+#endif
diff --git a/arch/h8300/include/asm/bitops.h b/arch/h8300/include/asm/bitops.h
new file mode 100644
index 00000000000..cb18e3b0aa9
--- /dev/null
+++ b/arch/h8300/include/asm/bitops.h
@@ -0,0 +1,212 @@
+#ifndef _H8300_BITOPS_H
+#define _H8300_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ * Copyright 2002, Yoshinori Sato
+ */
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+/*
+ * Function prototypes to keep gcc -Wall happy
+ */
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	unsigned long result;
+
+	result = -1;
+	__asm__("1:\n\t"
+		"shlr.l %2\n\t"
+		"adds #1,%0\n\t"
+		"bcs 1b"
+		: "=r" (result)
+		: "0"  (result),"r" (word));
+	return result;
+}
+
+#define H8300_GEN_BITOP_CONST(OP,BIT)			    \
+	case BIT:					    \
+	__asm__(OP " #" #BIT ",@%0"::"r"(b_addr):"memory"); \
+	break;
+
+#define H8300_GEN_BITOP(FNAME,OP)				      \
+static __inline__ void FNAME(int nr, volatile unsigned long* addr)    \
+{								      \
+	volatile unsigned char *b_addr;				      \
+	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);    \
+	if (__builtin_constant_p(nr)) {				      \
+		switch(nr & 7) {				      \
+			H8300_GEN_BITOP_CONST(OP,0)		      \
+			H8300_GEN_BITOP_CONST(OP,1)		      \
+			H8300_GEN_BITOP_CONST(OP,2)		      \
+			H8300_GEN_BITOP_CONST(OP,3)		      \
+			H8300_GEN_BITOP_CONST(OP,4)		      \
+			H8300_GEN_BITOP_CONST(OP,5)		      \
+			H8300_GEN_BITOP_CONST(OP,6)		      \
+			H8300_GEN_BITOP_CONST(OP,7)		      \
+		}						      \
+	} else {						      \
+		__asm__(OP " %w0,@%1"::"r"(nr),"r"(b_addr):"memory"); \
+	}							      \
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+H8300_GEN_BITOP(set_bit	  ,"bset")
+H8300_GEN_BITOP(clear_bit ,"bclr")
+H8300_GEN_BITOP(change_bit,"bnot")
+#define __set_bit(nr,addr)    set_bit((nr),(addr))
+#define __clear_bit(nr,addr)  clear_bit((nr),(addr))
+#define __change_bit(nr,addr) change_bit((nr),(addr))
+
+#undef H8300_GEN_BITOP
+#undef H8300_GEN_BITOP_CONST
+
+static __inline__ int test_bit(int nr, const unsigned long* addr)
+{
+	return (*((volatile unsigned char *)addr + 
+               ((nr >> 3) ^ 3)) & (1UL << (nr & 7))) != 0;
+}
+
+#define __test_bit(nr, addr) test_bit(nr, addr)
+
+#define H8300_GEN_TEST_BITOP_CONST_INT(OP,BIT)			     \
+	case BIT:						     \
+	__asm__("stc ccr,%w1\n\t"				     \
+		"orc #0x80,ccr\n\t"				     \
+		"bld #" #BIT ",@%4\n\t"				     \
+		OP " #" #BIT ",@%4\n\t"				     \
+		"rotxl.l %0\n\t"				     \
+		"ldc %w1,ccr"					     \
+		: "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr)	     \
+		: "0" (retval),"r" (b_addr)			     \
+		: "memory");                                         \
+        break;
+
+#define H8300_GEN_TEST_BITOP_CONST(OP,BIT)			     \
+	case BIT:						     \
+	__asm__("bld #" #BIT ",@%3\n\t"				     \
+		OP " #" #BIT ",@%3\n\t"				     \
+		"rotxl.l %0\n\t"				     \
+		: "=r"(retval),"=m"(*b_addr)			     \
+		: "0" (retval),"r" (b_addr)			     \
+		: "memory");                                         \
+        break;
+
+#define H8300_GEN_TEST_BITOP(FNNAME,OP)				     \
+static __inline__ int FNNAME(int nr, volatile void * addr)	     \
+{								     \
+	int retval = 0;						     \
+	char ccrsave;						     \
+	volatile unsigned char *b_addr;				     \
+	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);   \
+	if (__builtin_constant_p(nr)) {				     \
+		switch(nr & 7) {				     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,0)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,1)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,2)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,3)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,4)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,5)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,6)	     \
+			H8300_GEN_TEST_BITOP_CONST_INT(OP,7)	     \
+		}						     \
+	} else {						     \
+		__asm__("stc ccr,%w1\n\t"			     \
+			"orc #0x80,ccr\n\t"			     \
+			"btst %w5,@%4\n\t"			     \
+			OP " %w5,@%4\n\t"			     \
+			"beq 1f\n\t"				     \
+			"inc.l #1,%0\n"				     \
+			"1:\n\t"				     \
+			"ldc %w1,ccr"				     \
+			: "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr)  \
+			: "0" (retval),"r" (b_addr),"r"(nr)	     \
+			: "memory");				     \
+	}							     \
+	return retval;						     \
+}								     \
+								     \
+static __inline__ int __ ## FNNAME(int nr, volatile void * addr)     \
+{								     \
+	int retval = 0;						     \
+	volatile unsigned char *b_addr;				     \
+	b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3);   \
+	if (__builtin_constant_p(nr)) {				     \
+		switch(nr & 7) {				     \
+			H8300_GEN_TEST_BITOP_CONST(OP,0) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,1) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,2) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,3) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,4) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,5) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,6) 	     \
+			H8300_GEN_TEST_BITOP_CONST(OP,7) 	     \
+		}						     \
+	} else {						     \
+		__asm__("btst %w4,@%3\n\t"			     \
+			OP " %w4,@%3\n\t"			     \
+			"beq 1f\n\t"				     \
+			"inc.l #1,%0\n"				     \
+			"1:"					     \
+			: "=r"(retval),"=m"(*b_addr)		     \
+			: "0" (retval),"r" (b_addr),"r"(nr)	     \
+			: "memory");				     \
+	}							     \
+	return retval;						     \
+}
+
+H8300_GEN_TEST_BITOP(test_and_set_bit,	 "bset")
+H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
+H8300_GEN_TEST_BITOP(test_and_change_bit,"bnot")
+#undef H8300_GEN_TEST_BITOP_CONST
+#undef H8300_GEN_TEST_BITOP_CONST_INT
+#undef H8300_GEN_TEST_BITOP
+
+#include <asm-generic/bitops/ffs.h>
+
+static __inline__ unsigned long __ffs(unsigned long word)
+{
+	unsigned long result;
+
+	result = -1;
+	__asm__("1:\n\t"
+		"shlr.l %2\n\t"
+		"adds #1,%0\n\t"
+		"bcc 1b"
+		: "=r" (result)
+		: "0"(result),"r"(word));
+	return result;
+}
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _H8300_BITOPS_H */
diff --git a/arch/h8300/include/asm/bootinfo.h b/arch/h8300/include/asm/bootinfo.h
new file mode 100644
index 00000000000..5bed7e7aac0
--- /dev/null
+++ b/arch/h8300/include/asm/bootinfo.h
@@ -0,0 +1,2 @@
+
+/* Nothing for h8300 */
diff --git a/arch/h8300/include/asm/bug.h b/arch/h8300/include/asm/bug.h
new file mode 100644
index 00000000000..edddf5b086e
--- /dev/null
+++ b/arch/h8300/include/asm/bug.h
@@ -0,0 +1,4 @@
+#ifndef _H8300_BUG_H
+#define _H8300_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/arch/h8300/include/asm/bugs.h b/arch/h8300/include/asm/bugs.h
new file mode 100644
index 00000000000..1cb4afba6eb
--- /dev/null
+++ b/arch/h8300/include/asm/bugs.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-h8300/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/arch/h8300/include/asm/byteorder.h b/arch/h8300/include/asm/byteorder.h
new file mode 100644
index 00000000000..36e597d6161
--- /dev/null
+++ b/arch/h8300/include/asm/byteorder.h
@@ -0,0 +1,13 @@
+#ifndef _H8300_BYTEORDER_H
+#define _H8300_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _H8300_BYTEORDER_H */
diff --git a/arch/h8300/include/asm/cache.h b/arch/h8300/include/asm/cache.h
new file mode 100644
index 00000000000..c6350283649
--- /dev/null
+++ b/arch/h8300/include/asm/cache.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_H8300_CACHE_H
+#define __ARCH_H8300_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_BYTES  4
+
+/* m68k-elf-gcc  2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
diff --git a/arch/h8300/include/asm/cachectl.h b/arch/h8300/include/asm/cachectl.h
new file mode 100644
index 00000000000..c464022d8e2
--- /dev/null
+++ b/arch/h8300/include/asm/cachectl.h
@@ -0,0 +1,14 @@
+#ifndef _H8300_CACHECTL_H
+#define _H8300_CACHECTL_H
+
+/* Definitions for the cacheflush system call.  */
+
+#define FLUSH_SCOPE_LINE    0	/* Flush a cache line */
+#define FLUSH_SCOPE_PAGE    0	/* Flush a page */
+#define FLUSH_SCOPE_ALL     0	/* Flush the whole cache -- superuser only */
+
+#define FLUSH_CACHE_DATA    0	/* Writeback and flush data cache */
+#define FLUSH_CACHE_INSN    0	/* Flush instruction cache */
+#define FLUSH_CACHE_BOTH    0	/* Flush both caches */
+
+#endif /* _H8300_CACHECTL_H */
diff --git a/arch/h8300/include/asm/cacheflush.h b/arch/h8300/include/asm/cacheflush.h
new file mode 100644
index 00000000000..5ffdca217b9
--- /dev/null
+++ b/arch/h8300/include/asm/cacheflush.h
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2002, Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#ifndef _ASM_H8300_CACHEFLUSH_H
+#define _ASM_H8300_CACHEFLUSH_H
+
+/*
+ * Cache handling functions
+ * No Cache memory all dummy functions
+ */
+
+#define flush_cache_all()
+#define	flush_cache_mm(mm)
+#define	flush_cache_dup_mm(mm)		do { } while (0)
+#define	flush_cache_range(vma,a,b)
+#define	flush_cache_page(vma,p,pfn)
+#define	flush_dcache_page(page)
+#define	flush_dcache_mmap_lock(mapping)
+#define	flush_dcache_mmap_unlock(mapping)
+#define	flush_icache()
+#define	flush_icache_page(vma,page)
+#define	flush_icache_range(start,len)
+#define flush_cache_vmap(start, end)
+#define flush_cache_vunmap(start, end)
+#define	cache_push_v(vaddr,len)
+#define	cache_push(paddr,len)
+#define	cache_clear(paddr,len)
+
+#define	flush_dcache_range(a,b)
+
+#define	flush_icache_user_range(vma,page,addr,len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _ASM_H8300_CACHEFLUSH_H */
diff --git a/arch/h8300/include/asm/checksum.h b/arch/h8300/include/asm/checksum.h
new file mode 100644
index 00000000000..98724e12508
--- /dev/null
+++ b/arch/h8300/include/asm/checksum.h
@@ -0,0 +1,102 @@
+#ifndef _H8300_CHECKSUM_H
+#define _H8300_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+						int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	__asm__("mov.l %0,er0\n\t"
+		"add.w e0,r0\n\t"
+		"xor.w e0,e0\n\t"
+		"rotxl.w e0\n\t"
+		"add.w e0,r0\n\t"
+		"sub.w e0,e0\n\t"
+		"mov.l er0,%0"
+		: "=r"(sum)
+		: "0"(sum)
+		: "er0");
+	return (__force __sum16)~sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	__asm__ ("sub.l er0,er0\n\t"
+		 "add.l %2,%0\n\t"
+		 "addx	#0,r0l\n\t"
+		 "add.l	%3,%0\n\t"
+		 "addx	#0,r0l\n\t"
+		 "add.l %4,%0\n\t"
+		 "addx	#0,r0l\n\t"
+		 "add.l	er0,%0\n\t"
+		 "bcc	1f\n\t"
+		 "inc.l	#1,%0\n"
+		 "1:"
+		 : "=&r" (sum)
+		 : "0" (sum), "r" (daddr), "r" (saddr), "r" (len + proto)
+		 :"er0");
+	return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#endif /* _H8300_CHECKSUM_H */
diff --git a/arch/h8300/include/asm/cputime.h b/arch/h8300/include/asm/cputime.h
new file mode 100644
index 00000000000..092e187c7b0
--- /dev/null
+++ b/arch/h8300/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __H8300_CPUTIME_H
+#define __H8300_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __H8300_CPUTIME_H */
diff --git a/arch/h8300/include/asm/current.h b/arch/h8300/include/asm/current.h
new file mode 100644
index 00000000000..57d74ee55a1
--- /dev/null
+++ b/arch/h8300/include/asm/current.h
@@ -0,0 +1,25 @@
+#ifndef _H8300_CURRENT_H
+#define _H8300_CURRENT_H
+/*
+ *	current.h
+ *	(C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ *	rather than dedicate a register (as the m68k source does), we
+ *	just keep a global,  we should probably just change it all to be
+ *	current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+#include <asm/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+	return(current_thread_info()->task);
+}
+
+#define	current	get_current()
+
+#endif /* _H8300_CURRENT_H */
diff --git a/arch/h8300/include/asm/dbg.h b/arch/h8300/include/asm/dbg.h
new file mode 100644
index 00000000000..2c6d1cbcf73
--- /dev/null
+++ b/arch/h8300/include/asm/dbg.h
@@ -0,0 +1,2 @@
+#define DEBUG 1
+#define	BREAK asm volatile ("trap #3")
diff --git a/arch/h8300/include/asm/delay.h b/arch/h8300/include/asm/delay.h
new file mode 100644
index 00000000000..743beba70f8
--- /dev/null
+++ b/arch/h8300/include/asm/delay.h
@@ -0,0 +1,38 @@
+#ifndef _H8300_DELAY_H
+#define _H8300_DELAY_H
+
+#include <asm/param.h>
+
+/*
+ * Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp>
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+
+static inline void __delay(unsigned long loops)
+{
+	__asm__ __volatile__ ("1:\n\t"
+			      "dec.l #1,%0\n\t"
+			      "bne 1b"
+			      :"=r" (loops):"0"(loops));
+}
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)  
+ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void udelay(unsigned long usecs)
+{
+	usecs *= 4295;		/* 2**32 / 1000000 */
+	usecs /= (loops_per_jiffy*HZ);
+	if (usecs)
+		__delay(usecs);
+}
+
+#endif /* _H8300_DELAY_H */
diff --git a/arch/h8300/include/asm/device.h b/arch/h8300/include/asm/device.h
new file mode 100644
index 00000000000..d8f9872b0e2
--- /dev/null
+++ b/arch/h8300/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/h8300/include/asm/div64.h b/arch/h8300/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/h8300/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/h8300/include/asm/dma.h b/arch/h8300/include/asm/dma.h
new file mode 100644
index 00000000000..3edbaaaedf5
--- /dev/null
+++ b/arch/h8300/include/asm/dma.h
@@ -0,0 +1,15 @@
+#ifndef _H8300_DMA_H
+#define _H8300_DMA_H 
+ 
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#define MAX_DMA_CHANNELS 0
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+ 
+#endif /* _H8300_DMA_H */
diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
new file mode 100644
index 00000000000..a8b57d1f412
--- /dev/null
+++ b/arch/h8300/include/asm/elf.h
@@ -0,0 +1,104 @@
+#ifndef __ASMH8300_ELF_H
+#define __ASMH8300_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_H8_300
+#if defined(__H8300H__)
+#define ELF_CORE_EFLAGS 0x810000
+#endif
+#if defined(__H8300S__)
+#define ELF_CORE_EFLAGS 0x820000
+#endif
+
+#define ELF_PLAT_INIT(_r)	_r->er1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+
+#define R_H8_NONE       0
+#define R_H8_DIR32      1
+#define R_H8_DIR32_28   2
+#define R_H8_DIR32_24   3
+#define R_H8_DIR32_16   4
+#define R_H8_DIR32U     6
+#define R_H8_DIR32U_28  7
+#define R_H8_DIR32U_24  8
+#define R_H8_DIR32U_20  9
+#define R_H8_DIR32U_16 10
+#define R_H8_DIR24     11
+#define R_H8_DIR24_20  12
+#define R_H8_DIR24_16  13
+#define R_H8_DIR24U    14
+#define R_H8_DIR24U_20 15
+#define R_H8_DIR24U_16 16
+#define R_H8_DIR16     17
+#define R_H8_DIR16U    18
+#define R_H8_DIR16S_32 19
+#define R_H8_DIR16S_28 20
+#define R_H8_DIR16S_24 21
+#define R_H8_DIR16S_20 22
+#define R_H8_DIR16S    23
+#define R_H8_DIR8      24
+#define R_H8_DIR8U     25
+#define R_H8_DIR8Z_32  26
+#define R_H8_DIR8Z_28  27
+#define R_H8_DIR8Z_24  28
+#define R_H8_DIR8Z_20  29
+#define R_H8_DIR8Z_16  30
+#define R_H8_PCREL16   31
+#define R_H8_PCREL8    32
+#define R_H8_BPOS      33
+#define R_H8_PCREL32   34
+#define R_H8_GOT32O    35
+#define R_H8_GOT16O    36
+#define R_H8_DIR16A8   59
+#define R_H8_DIR16R8   60
+#define R_H8_DIR24A8   61
+#define R_H8_DIR24R8   62
+#define R_H8_DIR32A16  63
+#define R_H8_ABS32     65
+#define R_H8_ABS32A16 127
+
+#endif
diff --git a/arch/h8300/include/asm/emergency-restart.h b/arch/h8300/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/h8300/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/h8300/include/asm/errno.h b/arch/h8300/include/asm/errno.h
new file mode 100644
index 00000000000..0c2f5641fdc
--- /dev/null
+++ b/arch/h8300/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_ERRNO_H
+#define _H8300_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _H8300_ERRNO_H */
diff --git a/arch/h8300/include/asm/fb.h b/arch/h8300/include/asm/fb.h
new file mode 100644
index 00000000000..c7df3803099
--- /dev/null
+++ b/arch/h8300/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/h8300/include/asm/fcntl.h b/arch/h8300/include/asm/fcntl.h
new file mode 100644
index 00000000000..1952cb2e3b0
--- /dev/null
+++ b/arch/h8300/include/asm/fcntl.h
@@ -0,0 +1,11 @@
+#ifndef _H8300_FCNTL_H
+#define _H8300_FCNTL_H
+
+#define O_DIRECTORY	040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _H8300_FCNTL_H */
diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
new file mode 100644
index 00000000000..2a873508a9a
--- /dev/null
+++ b/arch/h8300/include/asm/flat.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-h8300/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __H8300_FLAT_H__
+#define __H8300_FLAT_H__
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		1
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_set_persistent(relval, p)		0
+
+/*
+ * on the H8 a couple of the relocations have an instruction in the
+ * top byte.  As there can only be 24bits of address space,  we just
+ * always preserve that 8bits at the top,  when it isn't an instruction
+ * is is 0 (davidm@snapgear.com)
+ */
+
+#define	flat_get_relocate_addr(rel)		(rel)
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
+        (get_unaligned(rp) & ((flags & FLAT_FLAG_GOTPIC) ? 0xffffffff: 0x00ffffff))
+#define flat_put_addr_at_rp(rp, addr, rel) \
+	put_unaligned (((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), rp)
+
+#endif /* __H8300_FLAT_H__ */
diff --git a/arch/h8300/include/asm/fpu.h b/arch/h8300/include/asm/fpu.h
new file mode 100644
index 00000000000..4fc416e80be
--- /dev/null
+++ b/arch/h8300/include/asm/fpu.h
@@ -0,0 +1 @@
+/* Nothing do */
diff --git a/arch/h8300/include/asm/futex.h b/arch/h8300/include/asm/futex.h
new file mode 100644
index 00000000000..6a332a9f099
--- /dev/null
+++ b/arch/h8300/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/h8300/include/asm/gpio.h b/arch/h8300/include/asm/gpio.h
new file mode 100644
index 00000000000..a714f0c0efb
--- /dev/null
+++ b/arch/h8300/include/asm/gpio.h
@@ -0,0 +1,52 @@
+#ifndef _H8300_GPIO_H
+#define _H8300_GPIO_H
+
+#define H8300_GPIO_P1 0
+#define H8300_GPIO_P2 1
+#define H8300_GPIO_P3 2
+#define H8300_GPIO_P4 3
+#define H8300_GPIO_P5 4
+#define H8300_GPIO_P6 5
+#define H8300_GPIO_P7 6
+#define H8300_GPIO_P8 7
+#define H8300_GPIO_P9 8
+#define H8300_GPIO_PA 9
+#define H8300_GPIO_PB 10
+#define H8300_GPIO_PC 11
+#define H8300_GPIO_PD 12
+#define H8300_GPIO_PE 13
+#define H8300_GPIO_PF 14
+#define H8300_GPIO_PG 15
+#define H8300_GPIO_PH 16
+
+#define H8300_GPIO_B7 0x80
+#define H8300_GPIO_B6 0x40
+#define H8300_GPIO_B5 0x20
+#define H8300_GPIO_B4 0x10
+#define H8300_GPIO_B3 0x08
+#define H8300_GPIO_B2 0x04
+#define H8300_GPIO_B1 0x02
+#define H8300_GPIO_B0 0x01
+
+#define H8300_GPIO_INPUT 0
+#define H8300_GPIO_OUTPUT 1
+
+#define H8300_GPIO_RESERVE(port, bits) \
+        h8300_reserved_gpio(port, bits)
+
+#define H8300_GPIO_FREE(port, bits) \
+        h8300_free_gpio(port, bits)
+
+#define H8300_GPIO_DDR(port, bit, dir) \
+        h8300_set_gpio_dir(((port) << 8) | (bit), dir)
+
+#define H8300_GPIO_GETDIR(port, bit) \
+        h8300_get_gpio_dir(((port) << 8) | (bit))
+
+extern int h8300_reserved_gpio(int port, int bits);
+extern int h8300_free_gpio(int port, int bits);
+extern int h8300_set_gpio_dir(int port_bit, int dir);
+extern int h8300_get_gpio_dir(int port_bit);
+extern int h8300_init_gpio(void);
+
+#endif
diff --git a/arch/h8300/include/asm/hardirq.h b/arch/h8300/include/asm/hardirq.h
new file mode 100644
index 00000000000..9d7f7a7462b
--- /dev/null
+++ b/arch/h8300/include/asm/hardirq.h
@@ -0,0 +1,28 @@
+#ifndef __H8300_HARDIRQ_H
+#define __H8300_HARDIRQ_H
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif
diff --git a/arch/h8300/include/asm/hw_irq.h b/arch/h8300/include/asm/hw_irq.h
new file mode 100644
index 00000000000..d75a5a1119e
--- /dev/null
+++ b/arch/h8300/include/asm/hw_irq.h
@@ -0,0 +1 @@
+/* Do Nothing */
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
new file mode 100644
index 00000000000..26dc6ccd944
--- /dev/null
+++ b/arch/h8300/include/asm/io.h
@@ -0,0 +1,324 @@
+#ifndef _H8300_IO_H
+#define _H8300_IO_H
+
+#ifdef __KERNEL__
+
+#include <asm/virtconvert.h>
+
+#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
+#include <asm/regs306x.h>
+#elif defined(CONFIG_H8S2678)
+#include <asm/regs267x.h>
+#else
+#error UNKNOWN CPU TYPE
+#endif
+
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+#ifndef H8300_IO_NOSWAP
+	unsigned short r;
+	__asm__("xor.b %w0,%x0\n\t"
+		"xor.b %x0,%w0\n\t"
+		"xor.b %w0,%x0"
+		:"=r"(r)
+		:"0"(v));
+	return r;
+#else
+	return v;
+#endif
+}
+
+static inline unsigned long _swapl(volatile unsigned long v)
+{
+#ifndef H8300_IO_NOSWAP
+	unsigned long r;
+	__asm__("xor.b %w0,%x0\n\t"
+		"xor.b %x0,%w0\n\t"
+		"xor.b %w0,%x0\n\t"
+		"xor.w %e0,%f0\n\t"
+		"xor.w %f0,%e0\n\t"
+		"xor.w %e0,%f0\n\t"
+		"xor.b %w0,%x0\n\t"
+		"xor.b %x0,%w0\n\t"
+		"xor.b %w0,%x0"
+		:"=r"(r)
+		:"0"(v));
+	return r;
+#else
+	return v;
+#endif
+}
+
+#define readb(addr) \
+    ({ unsigned char __v = \
+     *(volatile unsigned char *)((unsigned long)(addr) & 0x00ffffff); \
+     __v; })
+#define readw(addr) \
+    ({ unsigned short __v = \
+     *(volatile unsigned short *)((unsigned long)(addr) & 0x00ffffff); \
+     __v; })
+#define readl(addr) \
+    ({ unsigned long __v = \
+     *(volatile unsigned long *)((unsigned long)(addr) & 0x00ffffff); \
+     __v; })
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) \
+                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) \
+                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned long *) \
+                             ((unsigned long)(addr) & 0x00ffffff)) = (b))
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline int h8300_buswidth(unsigned int addr)
+{
+	return (*(volatile unsigned char *)ABWCR & (1 << ((addr >> 21) & 7))) == 0;
+}
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned char  *ap_b = (volatile unsigned char *) addr;
+	volatile unsigned short *ap_w = (volatile unsigned short *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+
+	if(h8300_buswidth(addr) && (addr & 1)) {
+		while (len--)
+			*ap_w = *bp++;
+	} else {
+		while (len--)
+			*ap_b = *bp++;
+	}
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned long *ap = (volatile unsigned long *) addr;
+	unsigned long *bp = (unsigned long *) buf;
+	while (len--)
+		*ap = _swapl(*bp++);
+}
+
+static inline void io_outsw_noswap(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*ap = *bp++;
+}
+
+static inline void io_outsl_noswap(unsigned int addr, const void *buf, int len)
+{
+	volatile unsigned long *ap = (volatile unsigned long *) addr;
+	unsigned long *bp = (unsigned long *) buf;
+	while (len--)
+		*ap = *bp++;
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char  *ap_b;
+	volatile unsigned short *ap_w;
+	unsigned char *bp = (unsigned char *) buf;
+
+	if(h8300_buswidth(addr)) {
+		ap_w = (volatile unsigned short *)(addr & ~1);
+		while (len--)
+			*bp++ = *ap_w & 0xff;
+	} else {
+		ap_b = (volatile unsigned char *)addr;
+		while (len--)
+			*bp++ = *ap_b;
+	}
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned long *ap = (volatile unsigned long *) addr;
+	unsigned long *bp = (unsigned long *) buf;
+	while (len--)
+		*bp++ = _swapl(*ap);
+}
+
+static inline void io_insw_noswap(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*bp++ = *ap;
+}
+
+static inline void io_insl_noswap(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned long *ap = (volatile unsigned long *) addr;
+	unsigned long *bp = (unsigned long *) buf;
+	while (len--)
+		*bp++ = *ap;
+}
+
+/*
+ *	make the short names macros so specific devices
+ *	can override them as required
+ */
+
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+#define mmiowb()
+
+#define inb(addr)    ((h8300_buswidth(addr))?readw((addr) & ~1) & 0xff:readb(addr))
+#define inw(addr)    _swapw(readw(addr))
+#define inl(addr)    _swapl(readl(addr))
+#define outb(x,addr) ((void)((h8300_buswidth(addr) && \
+                      ((addr) & 1))?writew(x,(addr) & ~1):writeb(x,addr)))
+#define outw(x,addr) ((void) writew(_swapw(x),addr))
+#define outl(x,addr) ((void) writel(_swapl(x),addr))
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* H8/300 internal I/O functions */
+static __inline__ unsigned char ctrl_inb(unsigned long addr)
+{
+	return *(volatile unsigned char*)addr;
+}
+
+static __inline__ unsigned short ctrl_inw(unsigned long addr)
+{
+	return *(volatile unsigned short*)addr;
+}
+
+static __inline__ unsigned long ctrl_inl(unsigned long addr)
+{
+	return *(volatile unsigned long*)addr;
+}
+
+static __inline__ void ctrl_outb(unsigned char b, unsigned long addr)
+{
+	*(volatile unsigned char*)addr = b;
+}
+
+static __inline__ void ctrl_outw(unsigned short b, unsigned long addr)
+{
+	*(volatile unsigned short*)addr = b;
+}
+
+static __inline__ void ctrl_outl(unsigned long b, unsigned long addr)
+{
+        *(volatile unsigned long*)addr = b;
+}
+
+/* Pages to physical address... */
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _H8300_IO_H */
diff --git a/arch/h8300/include/asm/ioctl.h b/arch/h8300/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/h8300/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/h8300/include/asm/ioctls.h b/arch/h8300/include/asm/ioctls.h
new file mode 100644
index 00000000000..98a53d06726
--- /dev/null
+++ b/arch/h8300/include/asm/ioctls.h
@@ -0,0 +1,85 @@
+#ifndef __ARCH_H8300_IOCTLS_H__
+#define __ARCH_H8300_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT	0x5426  /* For debugging only */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __ARCH_H8300_IOCTLS_H__ */
diff --git a/arch/h8300/include/asm/ipcbuf.h b/arch/h8300/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..2cd1ebcc109
--- /dev/null
+++ b/arch/h8300/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __H8300_IPCBUF_H__
+#define __H8300_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for H8/300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __H8300_IPCBUF_H__ */
diff --git a/arch/h8300/include/asm/irq.h b/arch/h8300/include/asm/irq.h
new file mode 100644
index 00000000000..13d7c601cd0
--- /dev/null
+++ b/arch/h8300/include/asm/irq.h
@@ -0,0 +1,49 @@
+#ifndef _H8300_IRQ_H_
+#define _H8300_IRQ_H_
+
+#include <asm/ptrace.h>
+
+#if defined(CONFIG_CPU_H8300H)
+#define NR_IRQS 64
+#define EXT_IRQ0 12
+#define EXT_IRQ1 13
+#define EXT_IRQ2 14
+#define EXT_IRQ3 15
+#define EXT_IRQ4 16
+#define EXT_IRQ5 17
+#define EXT_IRQ6 18
+#define EXT_IRQ7 19
+#define EXT_IRQS 5
+#define IER_REGS *(volatile unsigned char *)IER
+#endif
+#if defined(CONFIG_CPU_H8S)
+#define NR_IRQS 128
+#define EXT_IRQ0 16
+#define EXT_IRQ1 17
+#define EXT_IRQ2 18
+#define EXT_IRQ3 19
+#define EXT_IRQ4 20
+#define EXT_IRQ5 21
+#define EXT_IRQ6 22
+#define EXT_IRQ7 23
+#define EXT_IRQ8 24
+#define EXT_IRQ9 25
+#define EXT_IRQ10 26
+#define EXT_IRQ11 27
+#define EXT_IRQ12 28
+#define EXT_IRQ13 29
+#define EXT_IRQ14 30
+#define EXT_IRQ15 31
+#define EXT_IRQS 15
+
+#define IER_REGS *(volatile unsigned short *)IER
+#endif
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+typedef void (*h8300_vector)(void);
+
+#endif /* _H8300_IRQ_H_ */
diff --git a/arch/h8300/include/asm/irq_regs.h b/arch/h8300/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/h8300/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/h8300/include/asm/kdebug.h b/arch/h8300/include/asm/kdebug.h
new file mode 100644
index 00000000000..6ece1b03766
--- /dev/null
+++ b/arch/h8300/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/h8300/include/asm/kmap_types.h b/arch/h8300/include/asm/kmap_types.h
new file mode 100644
index 00000000000..1ec8a342712
--- /dev/null
+++ b/arch/h8300/include/asm/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_H8300_KMAP_TYPES_H
+#define _ASM_H8300_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/h8300/include/asm/linkage.h b/arch/h8300/include/asm/linkage.h
new file mode 100644
index 00000000000..6f4df7d4618
--- /dev/null
+++ b/arch/h8300/include/asm/linkage.h
@@ -0,0 +1,8 @@
+#ifndef _H8300_LINKAGE_H
+#define _H8300_LINKAGE_H
+
+#undef SYMBOL_NAME_LABEL
+#undef SYMBOL_NAME
+#define SYMBOL_NAME_LABEL(_name_) _##_name_##:
+#define SYMBOL_NAME(_name_) _##_name_
+#endif
diff --git a/arch/h8300/include/asm/local.h b/arch/h8300/include/asm/local.h
new file mode 100644
index 00000000000..fdd4efe437c
--- /dev/null
+++ b/arch/h8300/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_LOCAL_H_
+#define _H8300_LOCAL_H_
+
+#include <asm-generic/local.h>
+
+#endif
diff --git a/arch/h8300/include/asm/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..ab9d9646d24
--- /dev/null
+++ b/arch/h8300/include/asm/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _H8300_MC146818RTC_H
+#define _H8300_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _H8300_MC146818RTC_H */
diff --git a/arch/h8300/include/asm/md.h b/arch/h8300/include/asm/md.h
new file mode 100644
index 00000000000..1a47dc6691f
--- /dev/null
+++ b/arch/h8300/include/asm/md.h
@@ -0,0 +1,13 @@
+/* $Id: md.h,v 1.1 2002/11/19 02:09:26 gerg Exp $
+ * md.h: High speed xor_block operation for RAID4/5 
+ *
+ */
+ 
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
+
+#endif /* __ASM_MD_H */
diff --git a/arch/h8300/include/asm/mman.h b/arch/h8300/include/asm/mman.h
new file mode 100644
index 00000000000..b9f104f22a3
--- /dev/null
+++ b/arch/h8300/include/asm/mman.h
@@ -0,0 +1,17 @@
+#ifndef __H8300_MMAN_H__
+#define __H8300_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __H8300_MMAN_H__ */
diff --git a/arch/h8300/include/asm/mmu.h b/arch/h8300/include/asm/mmu.h
new file mode 100644
index 00000000000..2ce06ea4610
--- /dev/null
+++ b/arch/h8300/include/asm/mmu.h
@@ -0,0 +1,11 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#endif
diff --git a/arch/h8300/include/asm/mmu_context.h b/arch/h8300/include/asm/mmu_context.h
new file mode 100644
index 00000000000..f44b730da54
--- /dev/null
+++ b/arch/h8300/include/asm/mmu_context.h
@@ -0,0 +1,32 @@
+#ifndef __H8300_MMU_CONTEXT_H
+#define __H8300_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	// mm->context = virt_to_phys(mm->pgd);
+	return(0);
+}
+
+#define destroy_context(mm)		do { } while(0)
+#define deactivate_mm(tsk,mm)           do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif
diff --git a/arch/h8300/include/asm/module.h b/arch/h8300/include/asm/module.h
new file mode 100644
index 00000000000..de23231f319
--- /dev/null
+++ b/arch/h8300/include/asm/module.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_H8300_MODULE_H
+#define _ASM_H8300_MODULE_H
+/*
+ * This file contains the H8/300 architecture specific module code.
+ */
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#define MODULE_SYMBOL_PREFIX "_"
+
+#endif /* _ASM_H8/300_MODULE_H */
diff --git a/arch/h8300/include/asm/msgbuf.h b/arch/h8300/include/asm/msgbuf.h
new file mode 100644
index 00000000000..6b148cd09aa
--- /dev/null
+++ b/arch/h8300/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _H8300_MSGBUF_H
+#define _H8300_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for H8/300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _H8300_MSGBUF_H */
diff --git a/arch/h8300/include/asm/mutex.h b/arch/h8300/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/h8300/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
new file mode 100644
index 00000000000..0b6acf0b03a
--- /dev/null
+++ b/arch/h8300/include/asm/page.h
@@ -0,0 +1,78 @@
+#ifndef _H8300_PAGE_H
+#define _H8300_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	(12)
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+ 
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr)		virt_to_phys(vaddr)
+#define __va(paddr)		phys_to_virt((unsigned long)paddr)
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define MAP_NR(addr)		(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+#define pfn_valid(page)	        (page < max_mapnr)
+
+#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
+
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _H8300_PAGE_H */
diff --git a/arch/h8300/include/asm/page_offset.h b/arch/h8300/include/asm/page_offset.h
new file mode 100644
index 00000000000..f8706463008
--- /dev/null
+++ b/arch/h8300/include/asm/page_offset.h
@@ -0,0 +1,3 @@
+
+#define PAGE_OFFSET_RAW		0x00000000
+
diff --git a/arch/h8300/include/asm/param.h b/arch/h8300/include/asm/param.h
new file mode 100644
index 00000000000..1c72fb8080f
--- /dev/null
+++ b/arch/h8300/include/asm/param.h
@@ -0,0 +1,20 @@
+#ifndef _H8300_PARAM_H
+#define _H8300_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ		CONFIG_HZ
+#define	USER_HZ		HZ
+#define	CLOCKS_PER_SEC	(USER_HZ)
+#else
+#define HZ		100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _H8300_PARAM_H */
diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h
new file mode 100644
index 00000000000..97389b35aa3
--- /dev/null
+++ b/arch/h8300/include/asm/pci.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_H8300_PCI_H
+#define _ASM_H8300_PCI_H
+
+/*
+ * asm-h8300/pci.h - H8/300 specific PCI declarations.
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ */
+
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#endif /* _ASM_H8300_PCI_H */
diff --git a/arch/h8300/include/asm/percpu.h b/arch/h8300/include/asm/percpu.h
new file mode 100644
index 00000000000..72c03e3666d
--- /dev/null
+++ b/arch/h8300/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_H8300_PERCPU__
+#define __ARCH_H8300_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_H8300_PERCPU__ */
diff --git a/arch/h8300/include/asm/pgalloc.h b/arch/h8300/include/asm/pgalloc.h
new file mode 100644
index 00000000000..c2e89a286d2
--- /dev/null
+++ b/arch/h8300/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef _H8300_PGALLOC_H
+#define _H8300_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _H8300_PGALLOC_H */
diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
new file mode 100644
index 00000000000..a09230a08e0
--- /dev/null
+++ b/arch/h8300/include/asm/pgtable.h
@@ -0,0 +1,73 @@
+#ifndef _H8300_PGTABLE_H
+#define _H8300_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+#define pgd_present(pgd)     (1)       /* pages are always present on NO_MM */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *)0)
+#define pmd_none(pmd)           (1)
+#define pgd_offset_k(adrdress)  ((pgd_t *)0)
+#define pte_offset_kernel(dir, address) ((pte_t *)0)
+
+#define PAGE_NONE		__pgprot(0)    /* these mean nothing to NO_MM */
+#define PAGE_SHARED		__pgprot(0)    /* these mean nothing to NO_MM */
+#define PAGE_COPY		__pgprot(0)    /* these mean nothing to NO_MM */
+#define PAGE_READONLY	__pgprot(0)    /* these mean nothing to NO_MM */
+#define PAGE_KERNEL		__pgprot(0)    /* these mean nothing to NO_MM */
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()   do { } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#define arch_enter_lazy_cpu_mode()    do {} while (0)
+#endif /* _H8300_PGTABLE_H */
diff --git a/arch/h8300/include/asm/poll.h b/arch/h8300/include/asm/poll.h
new file mode 100644
index 00000000000..f61540c22d9
--- /dev/null
+++ b/arch/h8300/include/asm/poll.h
@@ -0,0 +1,11 @@
+#ifndef __H8300_POLL_H
+#define __H8300_POLL_H
+
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	256
+
+#include <asm-generic/poll.h>
+
+#undef POLLREMOVE
+
+#endif
diff --git a/arch/h8300/include/asm/posix_types.h b/arch/h8300/include/asm/posix_types.h
new file mode 100644
index 00000000000..5c553927fc5
--- /dev/null
+++ b/arch/h8300/include/asm/posix_types.h
@@ -0,0 +1,60 @@
+#ifndef __ARCH_H8300_POSIX_TYPES_H
+#define __ARCH_H8300_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef	__FD_SET
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef	__FD_CLR
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef	__FD_ISSET
+#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) */
+
+#endif
diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h
new file mode 100644
index 00000000000..69e8a34eb6d
--- /dev/null
+++ b/arch/h8300/include/asm/processor.h
@@ -0,0 +1,140 @@
+/*
+ * include/asm-h8300/processor.h
+ *
+ * Copyright (C) 2002 Yoshinori Sato
+ *
+ * Based on: linux/asm-m68nommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_H8300_PROCESSOR_H
+#define __ASM_H8300_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void) {
+	extern unsigned int	sw_usp;
+	return(sw_usp);
+}
+
+static inline void wrusp(unsigned long usp) {
+	extern unsigned int	sw_usp;
+	sw_usp = usp;
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	(0xFFFFFFFFUL)
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+#endif
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE	0
+
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned long  ccr;		/* saved status register */
+	unsigned long  esp0;            /* points to SR of stack frame */
+	struct {
+		unsigned short *addr;
+		unsigned short inst;
+	} breakinfo;
+};
+
+#define INIT_THREAD  {						\
+	.ksp  = sizeof(init_stack) + (unsigned long)init_stack, \
+	.usp  = 0,						\
+	.ccr  = PS_S,						\
+	.esp0 = 0,						\
+	.breakinfo = {						\
+		.addr = (unsigned short *)-1,			\
+		.inst = 0					\
+	}							\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#if defined(__H8300H__)
+#define start_thread(_regs, _pc, _usp)			        \
+do {							        \
+	set_fs(USER_DS);           /* reads from user space */  \
+  	(_regs)->pc = (_pc);				        \
+	(_regs)->ccr = 0x00;	   /* clear all flags */        \
+	(_regs)->er5 = current->mm->start_data;	/* GOT base */  \
+	wrusp((unsigned long)(_usp) - sizeof(unsigned long)*3);	\
+} while(0)
+#endif
+#if defined(__H8300S__)
+#define start_thread(_regs, _pc, _usp)			        \
+do {							        \
+	set_fs(USER_DS);           /* reads from user space */  \
+	(_regs)->pc = (_pc);				        \
+	(_regs)->ccr = 0x00;	   /* clear kernel flag */      \
+	(_regs)->exr = 0x78;       /* enable all interrupts */  \
+	(_regs)->er5 = current->mm->start_data;	/* GOT base */  \
+	/* 14 = space for retaddr(4), vector(4), er0(4) and ext(2) on stack */ \
+	wrusp(((unsigned long)(_usp)) - 14);                    \
+} while(0)
+#endif
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    MAP_NR((tsk)->thread.esp0) < max_mapnr) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    barrier()
+
+#endif
diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
new file mode 100644
index 00000000000..c2e05e4b512
--- /dev/null
+++ b/arch/h8300/include/asm/ptrace.h
@@ -0,0 +1,64 @@
+#ifndef _H8300_PTRACE_H
+#define _H8300_PTRACE_H
+
+#ifndef __ASSEMBLY__
+
+#define PT_ER1	   0
+#define PT_ER2	   1
+#define PT_ER3	   2
+#define PT_ER4	   3
+#define PT_ER5	   4
+#define PT_ER6	   5
+#define PT_ER0	   6
+#define PT_ORIG_ER0	   7
+#define PT_CCR	   8
+#define PT_PC	   9
+#define PT_USP	   10
+#define PT_EXR     12
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+	long     retpc;
+	long     er4;
+	long     er5;
+	long     er6;
+	long     er3;
+	long     er2;
+	long     er1;
+	long     orig_er0;
+	unsigned short ccr;
+	long     er0;
+	long     vector;
+#if defined(CONFIG_CPU_H8S)
+	unsigned short exr;
+#endif
+	unsigned long  pc;
+} __attribute__((aligned(2),packed));
+
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+
+#ifdef __KERNEL__
+#ifndef PS_S
+#define PS_S  (0x10)
+#endif
+
+#if defined(__H8300H__)
+#define H8300_REGS_NO 11
+#endif
+#if defined(__H8300S__)
+#define H8300_REGS_NO 12
+#endif
+
+/* Find the stack offset for a register, relative to thread.esp0. */
+#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
+
+#define user_mode(regs) (!((regs)->ccr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _H8300_PTRACE_H */
diff --git a/arch/h8300/include/asm/regs267x.h b/arch/h8300/include/asm/regs267x.h
new file mode 100644
index 00000000000..1bff731a9f7
--- /dev/null
+++ b/arch/h8300/include/asm/regs267x.h
@@ -0,0 +1,336 @@
+/* internal Peripherals Register address define */
+/* CPU: H8/306x                                 */
+
+#if !defined(__REGS_H8S267x__)
+#define __REGS_H8S267x__ 
+
+#if defined(__KERNEL__)
+
+#define DASTCR 0xFEE01A
+#define DADR0  0xFFFFA4
+#define DADR1  0xFFFFA5
+#define DACR01 0xFFFFA6
+#define DADR2  0xFFFFA8
+#define DADR3  0xFFFFA9
+#define DACR23 0xFFFFAA
+
+#define ADDRA  0xFFFF90
+#define ADDRAH 0xFFFF90
+#define ADDRAL 0xFFFF91
+#define ADDRB  0xFFFF92
+#define ADDRBH 0xFFFF92
+#define ADDRBL 0xFFFF93
+#define ADDRC  0xFFFF94
+#define ADDRCH 0xFFFF94
+#define ADDRCL 0xFFFF95
+#define ADDRD  0xFFFF96
+#define ADDRDH 0xFFFF96
+#define ADDRDL 0xFFFF97
+#define ADDRE  0xFFFF98
+#define ADDREH 0xFFFF98
+#define ADDREL 0xFFFF99
+#define ADDRF  0xFFFF9A
+#define ADDRFH 0xFFFF9A
+#define ADDRFL 0xFFFF9B
+#define ADDRG  0xFFFF9C
+#define ADDRGH 0xFFFF9C
+#define ADDRGL 0xFFFF9D
+#define ADDRH  0xFFFF9E
+#define ADDRHH 0xFFFF9E
+#define ADDRHL 0xFFFF9F
+
+#define ADCSR  0xFFFFA0
+#define ADCR   0xFFFFA1
+
+#define ABWCR  0xFFFEC0
+#define ASTCR  0xFFFEC1
+#define WTCRAH 0xFFFEC2
+#define WTCRAL 0xFFFEC3
+#define WTCRBH 0xFFFEC4
+#define WTCRBL 0xFFFEC5
+#define RDNCR  0xFFFEC6
+#define CSACRH 0xFFFEC8
+#define CSACRL 0xFFFEC9
+#define BROMCRH 0xFFFECA
+#define BROMCRL 0xFFFECB
+#define BCR    0xFFFECC
+#define DRAMCR 0xFFFED0
+#define DRACCR 0xFFFED2
+#define REFCR  0xFFFED4
+#define RTCNT  0xFFFED6
+#define RTCOR  0xFFFED7
+
+#define MAR0AH  0xFFFEE0
+#define MAR0AL  0xFFFEE2
+#define IOAR0A  0xFFFEE4
+#define ETCR0A  0xFFFEE6
+#define MAR0BH  0xFFFEE8
+#define MAR0BL  0xFFFEEA
+#define IOAR0B  0xFFFEEC
+#define ETCR0B  0xFFFEEE
+#define MAR1AH  0xFFFEF0
+#define MAR1AL  0xFFFEF2
+#define IOAR1A  0xFFFEF4
+#define ETCR1A  0xFFFEF6
+#define MAR1BH  0xFFFEF8
+#define MAR1BL  0xFFFEFA
+#define IOAR1B  0xFFFEFC
+#define ETCR1B  0xFFFEFE
+#define DMAWER  0xFFFF20
+#define DMATCR  0xFFFF21
+#define DMACR0A 0xFFFF22
+#define DMACR0B 0xFFFF23
+#define DMACR1A 0xFFFF24
+#define DMACR1B 0xFFFF25
+#define DMABCRH 0xFFFF26
+#define DMABCRL 0xFFFF27
+
+#define EDSAR0  0xFFFDC0
+#define EDDAR0  0xFFFDC4
+#define EDTCR0  0xFFFDC8
+#define EDMDR0  0xFFFDCC
+#define EDMDR0H 0xFFFDCC
+#define EDMDR0L 0xFFFDCD
+#define EDACR0  0xFFFDCE
+#define EDSAR1  0xFFFDD0
+#define EDDAR1  0xFFFDD4
+#define EDTCR1  0xFFFDD8
+#define EDMDR1  0xFFFDDC
+#define EDMDR1H 0xFFFDDC
+#define EDMDR1L 0xFFFDDD
+#define EDACR1  0xFFFDDE
+#define EDSAR2  0xFFFDE0
+#define EDDAR2  0xFFFDE4
+#define EDTCR2  0xFFFDE8
+#define EDMDR2  0xFFFDEC
+#define EDMDR2H 0xFFFDEC
+#define EDMDR2L 0xFFFDED
+#define EDACR2  0xFFFDEE
+#define EDSAR3  0xFFFDF0
+#define EDDAR3  0xFFFDF4
+#define EDTCR3  0xFFFDF8
+#define EDMDR3  0xFFFDFC
+#define EDMDR3H 0xFFFDFC
+#define EDMDR3L 0xFFFDFD
+#define EDACR3  0xFFFDFE
+
+#define IPRA  0xFFFE00
+#define IPRB  0xFFFE02
+#define IPRC  0xFFFE04
+#define IPRD  0xFFFE06
+#define IPRE  0xFFFE08
+#define IPRF  0xFFFE0A
+#define IPRG  0xFFFE0C
+#define IPRH  0xFFFE0E
+#define IPRI  0xFFFE10
+#define IPRJ  0xFFFE12
+#define IPRK  0xFFFE14
+#define ITSR  0xFFFE16
+#define SSIER 0xFFFE18
+#define ISCRH 0xFFFE1A
+#define ISCRL 0xFFFE1C
+
+#define INTCR 0xFFFF31
+#define IER   0xFFFF32
+#define IERH  0xFFFF32
+#define IERL  0xFFFF33
+#define ISR   0xFFFF34
+#define ISRH  0xFFFF34
+#define ISRL  0xFFFF35
+
+#define P1DDR 0xFFFE20
+#define P2DDR 0xFFFE21
+#define P3DDR 0xFFFE22
+#define P4DDR 0xFFFE23
+#define P5DDR 0xFFFE24
+#define P6DDR 0xFFFE25
+#define P7DDR 0xFFFE26
+#define P8DDR 0xFFFE27
+#define P9DDR 0xFFFE28
+#define PADDR 0xFFFE29
+#define PBDDR 0xFFFE2A
+#define PCDDR 0xFFFE2B
+#define PDDDR 0xFFFE2C
+#define PEDDR 0xFFFE2D
+#define PFDDR 0xFFFE2E
+#define PGDDR 0xFFFE2F
+#define PHDDR 0xFFFF74
+
+#define PFCR0 0xFFFE32
+#define PFCR1 0xFFFE33
+#define PFCR2 0xFFFE34
+
+#define PAPCR 0xFFFE36
+#define PBPCR 0xFFFE37
+#define PCPCR 0xFFFE38
+#define PDPCR 0xFFFE39
+#define PEPCR 0xFFFE3A
+
+#define P3ODR 0xFFFE3C
+#define PAODR 0xFFFE3D
+
+#define P1DR  0xFFFF60
+#define P2DR  0xFFFF61
+#define P3DR  0xFFFF62
+#define P4DR  0xFFFF63
+#define P5DR  0xFFFF64
+#define P6DR  0xFFFF65
+#define P7DR  0xFFFF66
+#define P8DR  0xFFFF67
+#define P9DR  0xFFFF68
+#define PADR  0xFFFF69
+#define PBDR  0xFFFF6A
+#define PCDR  0xFFFF6B
+#define PDDR  0xFFFF6C
+#define PEDR  0xFFFF6D
+#define PFDR  0xFFFF6E
+#define PGDR  0xFFFF6F
+#define PHDR  0xFFFF72
+
+#define PORT1 0xFFFF50
+#define PORT2 0xFFFF51
+#define PORT3 0xFFFF52
+#define PORT4 0xFFFF53
+#define PORT5 0xFFFF54
+#define PORT6 0xFFFF55
+#define PORT7 0xFFFF56
+#define PORT8 0xFFFF57
+#define PORT9 0xFFFF58
+#define PORTA 0xFFFF59
+#define PORTB 0xFFFF5A
+#define PORTC 0xFFFF5B
+#define PORTD 0xFFFF5C
+#define PORTE 0xFFFF5D
+#define PORTF 0xFFFF5E
+#define PORTG 0xFFFF5F
+#define PORTH 0xFFFF70
+
+#define PCR   0xFFFF46
+#define PMR   0xFFFF47
+#define NDERH 0xFFFF48
+#define NDERL 0xFFFF49
+#define PODRH 0xFFFF4A
+#define PODRL 0xFFFF4B
+#define NDRH1 0xFFFF4C
+#define NDRL1 0xFFFF4D
+#define NDRH2 0xFFFF4E
+#define NDRL2 0xFFFF4F
+
+#define SMR0  0xFFFF78
+#define BRR0  0xFFFF79
+#define SCR0  0xFFFF7A
+#define TDR0  0xFFFF7B
+#define SSR0  0xFFFF7C
+#define RDR0  0xFFFF7D
+#define SCMR0 0xFFFF7E
+#define SMR1  0xFFFF80
+#define BRR1  0xFFFF81
+#define SCR1  0xFFFF82
+#define TDR1  0xFFFF83
+#define SSR1  0xFFFF84
+#define RDR1  0xFFFF85
+#define SCMR1 0xFFFF86
+#define SMR2  0xFFFF88
+#define BRR2  0xFFFF89
+#define SCR2  0xFFFF8A
+#define TDR2  0xFFFF8B
+#define SSR2  0xFFFF8C
+#define RDR2  0xFFFF8D
+#define SCMR2 0xFFFF8E
+
+#define IRCR0 0xFFFE1E
+#define SEMR  0xFFFDA8
+
+#define MDCR    0xFFFF3E
+#define SYSCR   0xFFFF3D
+#define MSTPCRH 0xFFFF40
+#define MSTPCRL 0xFFFF41
+#define FLMCR1  0xFFFFC8
+#define FLMCR2  0xFFFFC9
+#define EBR1    0xFFFFCA
+#define EBR2    0xFFFFCB
+#define CTGARC_RAMCR   0xFFFECE
+#define SBYCR   0xFFFF3A
+#define SCKCR   0xFFFF3B
+#define PLLCR   0xFFFF45
+
+#define TSTR   0xFFFFC0
+#define TSNC   0XFFFFC1
+
+#define TCR0   0xFFFFD0
+#define TMDR0  0xFFFFD1
+#define TIORH0 0xFFFFD2
+#define TIORL0 0xFFFFD3
+#define TIER0  0xFFFFD4
+#define TSR0   0xFFFFD5
+#define TCNT0  0xFFFFD6
+#define GRA0   0xFFFFD8
+#define GRB0   0xFFFFDA
+#define GRC0   0xFFFFDC
+#define GRD0   0xFFFFDE
+#define TCR1   0xFFFFE0
+#define TMDR1  0xFFFFE1
+#define TIORH1 0xFFFFE2
+#define TIORL1 0xFFFFE3
+#define TIER1  0xFFFFE4
+#define TSR1   0xFFFFE5
+#define TCNT1  0xFFFFE6
+#define GRA1   0xFFFFE8
+#define GRB1   0xFFFFEA
+#define TCR2   0xFFFFF0
+#define TMDR2  0xFFFFF1
+#define TIORH2 0xFFFFF2
+#define TIORL2 0xFFFFF3
+#define TIER2  0xFFFFF4
+#define TSR2   0xFFFFF5
+#define TCNT2  0xFFFFF6
+#define GRA2   0xFFFFF8
+#define GRB2   0xFFFFFA
+#define TCR3   0xFFFE80
+#define TMDR3  0xFFFE81
+#define TIORH3 0xFFFE82
+#define TIORL3 0xFFFE83
+#define TIER3  0xFFFE84
+#define TSR3   0xFFFE85
+#define TCNT3  0xFFFE86
+#define GRA3   0xFFFE88
+#define GRB3   0xFFFE8A
+#define GRC3   0xFFFE8C
+#define GRD3   0xFFFE8E
+#define TCR4   0xFFFE90
+#define TMDR4  0xFFFE91
+#define TIORH4 0xFFFE92
+#define TIORL4 0xFFFE93
+#define TIER4  0xFFFE94
+#define TSR4   0xFFFE95
+#define TCNT4  0xFFFE96
+#define GRA4   0xFFFE98
+#define GRB4   0xFFFE9A
+#define TCR5   0xFFFEA0
+#define TMDR5  0xFFFEA1
+#define TIORH5 0xFFFEA2
+#define TIORL5 0xFFFEA3
+#define TIER5  0xFFFEA4
+#define TSR5   0xFFFEA5
+#define TCNT5  0xFFFEA6
+#define GRA5   0xFFFEA8
+#define GRB5   0xFFFEAA
+
+#define _8TCR0   0xFFFFB0
+#define _8TCR1   0xFFFFB1
+#define _8TCSR0  0xFFFFB2
+#define _8TCSR1  0xFFFFB3
+#define _8TCORA0 0xFFFFB4
+#define _8TCORA1 0xFFFFB5
+#define _8TCORB0 0xFFFFB6
+#define _8TCORB1 0xFFFFB7
+#define _8TCNT0  0xFFFFB8
+#define _8TCNT1  0xFFFFB9
+
+#define TCSR    0xFFFFBC
+#define TCNT    0xFFFFBD
+#define RSTCSRW 0xFFFFBE
+#define RSTCSRR 0xFFFFBF
+
+#endif /* __KERNEL__ */
+#endif /* __REGS_H8S267x__ */
diff --git a/arch/h8300/include/asm/regs306x.h b/arch/h8300/include/asm/regs306x.h
new file mode 100644
index 00000000000..027dd633fa2
--- /dev/null
+++ b/arch/h8300/include/asm/regs306x.h
@@ -0,0 +1,212 @@
+/* internal Peripherals Register address define */
+/* CPU: H8/306x                                 */
+
+#if !defined(__REGS_H8306x__)
+#define __REGS_H8306x__ 
+
+#if defined(__KERNEL__)
+
+#define DASTCR 0xFEE01A
+#define DADR0  0xFEE09C
+#define DADR1  0xFEE09D
+#define DACR   0xFEE09E
+
+#define ADDRAH 0xFFFFE0
+#define ADDRAL 0xFFFFE1
+#define ADDRBH 0xFFFFE2
+#define ADDRBL 0xFFFFE3
+#define ADDRCH 0xFFFFE4
+#define ADDRCL 0xFFFFE5
+#define ADDRDH 0xFFFFE6
+#define ADDRDL 0xFFFFE7
+#define ADCSR  0xFFFFE8
+#define ADCR   0xFFFFE9
+
+#define BRCR   0xFEE013
+#define ADRCR  0xFEE01E
+#define CSCR   0xFEE01F
+#define ABWCR  0xFEE020
+#define ASTCR  0xFEE021
+#define WCRH   0xFEE022
+#define WCRL   0xFEE023
+#define BCR    0xFEE024
+#define DRCRA  0xFEE026
+#define DRCRB  0xFEE027
+#define RTMCSR 0xFEE028
+#define RTCNT  0xFEE029
+#define RTCOR  0xFEE02A
+
+#define MAR0AR  0xFFFF20
+#define MAR0AE  0xFFFF21
+#define MAR0AH  0xFFFF22
+#define MAR0AL  0xFFFF23
+#define ETCR0AL 0xFFFF24
+#define ETCR0AH 0xFFFF25
+#define IOAR0A  0xFFFF26
+#define DTCR0A  0xFFFF27
+#define MAR0BR  0xFFFF28
+#define MAR0BE  0xFFFF29
+#define MAR0BH  0xFFFF2A
+#define MAR0BL  0xFFFF2B
+#define ETCR0BL 0xFFFF2C
+#define ETCR0BH 0xFFFF2D
+#define IOAR0B  0xFFFF2E
+#define DTCR0B  0xFFFF2F
+#define MAR1AR  0xFFFF30
+#define MAR1AE  0xFFFF31
+#define MAR1AH  0xFFFF32
+#define MAR1AL  0xFFFF33
+#define ETCR1AL 0xFFFF34
+#define ETCR1AH 0xFFFF35
+#define IOAR1A  0xFFFF36
+#define DTCR1A  0xFFFF37
+#define MAR1BR  0xFFFF38
+#define MAR1BE  0xFFFF39
+#define MAR1BH  0xFFFF3A
+#define MAR1BL  0xFFFF3B
+#define ETCR1BL 0xFFFF3C
+#define ETCR1BH 0xFFFF3D
+#define IOAR1B  0xFFFF3E
+#define DTCR1B  0xFFFF3F
+
+#define ISCR 0xFEE014
+#define IER  0xFEE015
+#define ISR  0xFEE016
+#define IPRA 0xFEE018
+#define IPRB 0xFEE019
+
+#define P1DDR 0xFEE000
+#define P2DDR 0xFEE001
+#define P3DDR 0xFEE002
+#define P4DDR 0xFEE003
+#define P5DDR 0xFEE004
+#define P6DDR 0xFEE005
+/*#define P7DDR 0xFEE006*/
+#define P8DDR 0xFEE007
+#define P9DDR 0xFEE008
+#define PADDR 0xFEE009
+#define PBDDR 0xFEE00A
+
+#define P1DR  0xFFFFD0
+#define P2DR  0xFFFFD1
+#define P3DR  0xFFFFD2
+#define P4DR  0xFFFFD3
+#define P5DR  0xFFFFD4
+#define P6DR  0xFFFFD5
+/*#define P7DR  0xFFFFD6*/
+#define P8DR  0xFFFFD7
+#define P9DR  0xFFFFD8
+#define PADR  0xFFFFD9
+#define PBDR  0xFFFFDA
+
+#define P2CR  0xFEE03C
+#define P4CR  0xFEE03E
+#define P5CR  0xFEE03F
+
+#define SMR0  0xFFFFB0
+#define BRR0  0xFFFFB1
+#define SCR0  0xFFFFB2
+#define TDR0  0xFFFFB3
+#define SSR0  0xFFFFB4
+#define RDR0  0xFFFFB5
+#define SCMR0 0xFFFFB6
+#define SMR1  0xFFFFB8
+#define BRR1  0xFFFFB9
+#define SCR1  0xFFFFBA
+#define TDR1  0xFFFFBB
+#define SSR1  0xFFFFBC
+#define RDR1  0xFFFFBD
+#define SCMR1 0xFFFFBE
+#define SMR2  0xFFFFC0
+#define BRR2  0xFFFFC1
+#define SCR2  0xFFFFC2
+#define TDR2  0xFFFFC3
+#define SSR2  0xFFFFC4
+#define RDR2  0xFFFFC5
+#define SCMR2 0xFFFFC6
+
+#define MDCR   0xFEE011
+#define SYSCR  0xFEE012
+#define DIVCR  0xFEE01B
+#define MSTCRH 0xFEE01C
+#define MSTCRL 0xFEE01D
+#define FLMCR1 0xFEE030
+#define FLMCR2 0xFEE031
+#define EBR1   0xFEE032
+#define EBR2   0xFEE033
+#define RAMCR  0xFEE077
+
+#define TSTR   0xFFFF60
+#define TSNC   0XFFFF61
+#define TMDR   0xFFFF62
+#define TOLR   0xFFFF63
+#define TISRA  0xFFFF64
+#define TISRB  0xFFFF65
+#define TISRC  0xFFFF66
+#define TCR0   0xFFFF68
+#define TIOR0  0xFFFF69
+#define TCNT0H 0xFFFF6A
+#define TCNT0L 0xFFFF6B
+#define GRA0H  0xFFFF6C
+#define GRA0L  0xFFFF6D
+#define GRB0H  0xFFFF6E
+#define GRB0L  0xFFFF6F
+#define TCR1   0xFFFF70
+#define TIOR1  0xFFFF71
+#define TCNT1H 0xFFFF72
+#define TCNT1L 0xFFFF73
+#define GRA1H  0xFFFF74
+#define GRA1L  0xFFFF75
+#define GRB1H  0xFFFF76
+#define GRB1L  0xFFFF77
+#define TCR3   0xFFFF78
+#define TIOR3  0xFFFF79
+#define TCNT3H 0xFFFF7A
+#define TCNT3L 0xFFFF7B
+#define GRA3H  0xFFFF7C
+#define GRA3L  0xFFFF7D
+#define GRB3H  0xFFFF7E
+#define GRB3L  0xFFFF7F
+
+#define _8TCR0  0xFFFF80
+#define _8TCR1  0xFFFF81
+#define _8TCSR0 0xFFFF82
+#define _8TCSR1 0xFFFF83
+#define TCORA0 0xFFFF84
+#define TCORA1 0xFFFF85
+#define TCORB0 0xFFFF86
+#define TCORB1 0xFFFF87
+#define _8TCNT0 0xFFFF88
+#define _8TCNT1 0xFFFF89
+
+#define _8TCR2  0xFFFF90
+#define _8TCR3  0xFFFF91
+#define _8TCSR2 0xFFFF92
+#define _8TCSR3 0xFFFF93
+#define TCORA2 0xFFFF94
+#define TCORA3 0xFFFF95
+#define TCORB2 0xFFFF96
+#define TCORB3 0xFFFF97
+#define _8TCNT2 0xFFFF98
+#define _8TCNT3 0xFFFF99
+
+#define TCSR   0xFFFF8C
+#define TCNT   0xFFFF8D
+#define RSTCSR 0xFFFF8F
+
+#define TPMR  0xFFFFA0
+#define TPCR  0xFFFFA1
+#define NDERB 0xFFFFA2
+#define NDERA 0xFFFFA3
+#define NDRB1 0xFFFFA4
+#define NDRA1 0xFFFFA5
+#define NDRB2 0xFFFFA6
+#define NDRA2 0xFFFFA7
+
+#define TCSR    0xFFFF8C
+#define TCNT    0xFFFF8D
+#define RSTCSRW 0xFFFF8E
+#define RSTCSRR 0xFFFF8F
+
+#endif /* __KERNEL__ */
+#endif /* __REGS_H8306x__ */
diff --git a/arch/h8300/include/asm/resource.h b/arch/h8300/include/asm/resource.h
new file mode 100644
index 00000000000..46c5f439160
--- /dev/null
+++ b/arch/h8300/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_RESOURCE_H
+#define _H8300_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _H8300_RESOURCE_H */
diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h
new file mode 100644
index 00000000000..d3ecdd87ac9
--- /dev/null
+++ b/arch/h8300/include/asm/scatterlist.h
@@ -0,0 +1,18 @@
+#ifndef _H8300_SCATTERLIST_H
+#define _H8300_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+#define ISA_DMA_THRESHOLD	(0xffffffff)
+
+#endif /* !(_H8300_SCATTERLIST_H) */
diff --git a/arch/h8300/include/asm/sections.h b/arch/h8300/include/asm/sections.h
new file mode 100644
index 00000000000..a81743e8b74
--- /dev/null
+++ b/arch/h8300/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_SECTIONS_H_
+#define _H8300_SECTIONS_H_
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/h8300/include/asm/segment.h b/arch/h8300/include/asm/segment.h
new file mode 100644
index 00000000000..b79a82d0f99
--- /dev/null
+++ b/arch/h8300/include/asm/segment.h
@@ -0,0 +1,49 @@
+#ifndef _H8300_SEGMENT_H
+#define _H8300_SEGMENT_H
+
+/* define constants */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (3)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (4)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define USER_DS		MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+    return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _H8300_SEGMENT_H */
diff --git a/arch/h8300/include/asm/sembuf.h b/arch/h8300/include/asm/sembuf.h
new file mode 100644
index 00000000000..e04a3ec0cb9
--- /dev/null
+++ b/arch/h8300/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _H8300_SEMBUF_H
+#define _H8300_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _H8300_SEMBUF_H */
diff --git a/arch/h8300/include/asm/setup.h b/arch/h8300/include/asm/setup.h
new file mode 100644
index 00000000000..e2c600e9673
--- /dev/null
+++ b/arch/h8300/include/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef __H8300_SETUP_H
+#define __H8300_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif
diff --git a/arch/h8300/include/asm/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
new file mode 100644
index 00000000000..b6bb6e58295
--- /dev/null
+++ b/arch/h8300/include/asm/sh_bios.h
@@ -0,0 +1,29 @@
+/* eCos HAL interface header */
+
+#ifndef SH_BIOS_H
+#define SH_BIOS_H
+
+#define HAL_IF_VECTOR_TABLE 0xfffe20
+#define CALL_IF_SET_CONSOLE_COMM  13
+#define QUERY_CURRENT -1
+#define MANGLER       -3
+
+/* Checking for GDB stub active */
+/* suggestion Jonathan Larmour */
+static int sh_bios_in_gdb_mode(void)
+{
+	static int gdb_active = -1;
+	if (gdb_active == -1) {
+		int (*set_console_comm)(int);
+		set_console_comm = ((void **)HAL_IF_VECTOR_TABLE)[CALL_IF_SET_CONSOLE_COMM];
+		gdb_active = (set_console_comm(QUERY_CURRENT) == MANGLER);
+	}
+	return gdb_active;
+}
+
+static void sh_bios_gdb_detach(void)
+{
+
+}
+
+#endif
diff --git a/arch/h8300/include/asm/shm.h b/arch/h8300/include/asm/shm.h
new file mode 100644
index 00000000000..ed6623c0545
--- /dev/null
+++ b/arch/h8300/include/asm/shm.h
@@ -0,0 +1,31 @@
+#ifndef _H8300_SHM_H
+#define _H8300_SHM_H
+
+
+/* format of page table entries that correspond to shared memory pages
+   currently out in swap space (see also mm/swap.c):
+   bits 0-1 (PAGE_PRESENT) is  = 0
+   bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
+   bits 31..9 are used like this:
+   bits 15..9 (SHM_ID) the id of the shared memory segment
+   bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
+                    (actually only bits 25..16 get used since SHMMAX is so low)
+   bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
+*/
+/* on the m68k both bits 0 and 1 must be zero */
+/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
+   others are reduced by 2. --m */
+
+#ifndef CONFIG_SUN3
+#define SHM_ID_SHIFT	9
+#else
+#define SHM_ID_SHIFT	7
+#endif
+#define _SHM_ID_BITS	7
+#define SHM_ID_MASK	((1<<_SHM_ID_BITS)-1)
+
+#define SHM_IDX_SHIFT	(SHM_ID_SHIFT+_SHM_ID_BITS)
+#define _SHM_IDX_BITS	15
+#define SHM_IDX_MASK	((1<<_SHM_IDX_BITS)-1)
+
+#endif /* _H8300_SHM_H */
diff --git a/arch/h8300/include/asm/shmbuf.h b/arch/h8300/include/asm/shmbuf.h
new file mode 100644
index 00000000000..64e77993a7a
--- /dev/null
+++ b/arch/h8300/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _H8300_SHMBUF_H
+#define _H8300_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _H8300_SHMBUF_H */
diff --git a/arch/h8300/include/asm/shmparam.h b/arch/h8300/include/asm/shmparam.h
new file mode 100644
index 00000000000..d1863953ec6
--- /dev/null
+++ b/arch/h8300/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_SHMPARAM_H
+#define _H8300_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _H8300_SHMPARAM_H */
diff --git a/arch/h8300/include/asm/sigcontext.h b/arch/h8300/include/asm/sigcontext.h
new file mode 100644
index 00000000000..e4b81505f8f
--- /dev/null
+++ b/arch/h8300/include/asm/sigcontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_H8300_SIGCONTEXT_H
+#define _ASM_H8300_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long  sc_mask; 	/* old sigmask */
+	unsigned long  sc_usp;		/* old user stack pointer */
+	unsigned long  sc_er0;
+	unsigned long  sc_er1;
+	unsigned long  sc_er2;
+	unsigned long  sc_er3;
+	unsigned long  sc_er4;
+	unsigned long  sc_er5;
+	unsigned long  sc_er6;
+	unsigned short sc_ccr;
+	unsigned long  sc_pc;
+};
+
+#endif
diff --git a/arch/h8300/include/asm/siginfo.h b/arch/h8300/include/asm/siginfo.h
new file mode 100644
index 00000000000..bc8fbea931a
--- /dev/null
+++ b/arch/h8300/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_SIGINFO_H
+#define _H8300_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h
new file mode 100644
index 00000000000..7bc15048a64
--- /dev/null
+++ b/arch/h8300/include/asm/signal.h
@@ -0,0 +1,161 @@
+#ifndef _H8300_SIGNAL_H
+#define _H8300_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002 /* not supported yet */
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _H8300_SIGNAL_H */
diff --git a/arch/h8300/include/asm/smp.h b/arch/h8300/include/asm/smp.h
new file mode 100644
index 00000000000..9e9bd7e5892
--- /dev/null
+++ b/arch/h8300/include/asm/smp.h
@@ -0,0 +1 @@
+/* nothing required here yet */
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
new file mode 100644
index 00000000000..da2520dbf25
--- /dev/null
+++ b/arch/h8300/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/h8300/include/asm/sockios.h b/arch/h8300/include/asm/sockios.h
new file mode 100644
index 00000000000..e9c7ec810c2
--- /dev/null
+++ b/arch/h8300/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ARCH_H8300_SOCKIOS__
+#define __ARCH_H8300_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* __ARCH_H8300_SOCKIOS__ */
diff --git a/arch/h8300/include/asm/spinlock.h b/arch/h8300/include/asm/spinlock.h
new file mode 100644
index 00000000000..d5407fa173e
--- /dev/null
+++ b/arch/h8300/include/asm/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __H8300_SPINLOCK_H
+#define __H8300_SPINLOCK_H
+
+#error "H8/300 doesn't do SMP yet"
+
+#endif
diff --git a/arch/h8300/include/asm/stat.h b/arch/h8300/include/asm/stat.h
new file mode 100644
index 00000000000..62c3cc24dfe
--- /dev/null
+++ b/arch/h8300/include/asm/stat.h
@@ -0,0 +1,78 @@
+#ifndef _H8300_STAT_H
+#define _H8300_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  __unused1;
+	unsigned long  st_mtime;
+	unsigned long  __unused2;
+	unsigned long  st_ctime;
+	unsigned long  __unused3;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad1[2];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[2];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif /* _H8300_STAT_H */
diff --git a/arch/h8300/include/asm/statfs.h b/arch/h8300/include/asm/statfs.h
new file mode 100644
index 00000000000..b96efa712aa
--- /dev/null
+++ b/arch/h8300/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _H8300_STATFS_H
+#define _H8300_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _H8300_STATFS_H */
diff --git a/arch/h8300/include/asm/string.h b/arch/h8300/include/asm/string.h
new file mode 100644
index 00000000000..ca5034897d8
--- /dev/null
+++ b/arch/h8300/include/asm/string.h
@@ -0,0 +1,44 @@
+#ifndef _H8300_STRING_H_
+#define _H8300_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void * s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *d, const void *s, size_t count);
+
+#else /* KERNEL */
+
+/*
+ *	let user libraries deal with these,
+ *	IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+
+#endif /* _M68K_STRING_H_ */
diff --git a/arch/h8300/include/asm/system.h b/arch/h8300/include/asm/system.h
new file mode 100644
index 00000000000..4b8e475908a
--- /dev/null
+++ b/arch/h8300/include/asm/system.h
@@ -0,0 +1,158 @@
+#ifndef _H8300_SYSTEM_H
+#define _H8300_SYSTEM_H
+
+#include <linux/linkage.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.  This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ *
+ * H8/300 Porting 2002/09/04 Yoshinori Sato
+ */
+
+asmlinkage void resume(void);
+#define switch_to(prev,next,last) {                         \
+  void *_last;						    \
+  __asm__ __volatile__(					    \
+  			"mov.l	%1, er0\n\t"		    \
+			"mov.l	%2, er1\n\t"		    \
+                        "mov.l  %3, er2\n\t"                \
+			"jsr @_resume\n\t"                  \
+                        "mov.l  er2,%0\n\t"                 \
+		       : "=r" (_last)			    \
+		       : "r" (&(prev->thread)),		    \
+			 "r" (&(next->thread)),		    \
+                         "g" (prev)                         \
+		       : "cc", "er0", "er1", "er2", "er3"); \
+  (last) = _last; 					    \
+}
+
+#define __sti() asm volatile ("andc #0x7f,ccr")
+#define __cli() asm volatile ("orc  #0x80,ccr")
+
+#define __save_flags(x) \
+       asm volatile ("stc ccr,%w0":"=r" (x))
+
+#define __restore_flags(x) \
+       asm volatile ("ldc %w0,ccr": :"r" (x))
+
+#define	irqs_disabled()			\
+({					\
+	unsigned char flags;		\
+	__save_flags(flags);	        \
+	((flags & 0x80) == 0x80);	\
+})
+
+#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
+
+/* For spinlocks etc */
+#define local_irq_disable()	__cli()
+#define local_irq_enable()      __sti()
+#define local_irq_save(x)	({ __save_flags(x); local_irq_disable(); })
+#define local_irq_restore(x)	__restore_flags(x)
+#define local_save_flags(x)     __save_flags(x)
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on H8...
+ */
+#define nop()  asm volatile ("nop"::)
+#define mb()   asm volatile (""   : : :"memory")
+#define rmb()  asm volatile (""   : : :"memory")
+#define wmb()  asm volatile (""   : : :"memory")
+#define set_mb(var, value) do { xchg(&var, value); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+  unsigned long tmp, flags;
+
+  local_irq_save(flags);
+
+  switch (size) {
+  case 1:
+    __asm__ __volatile__
+    ("mov.b %2,%0\n\t"
+     "mov.b %1,%2"
+    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 2:
+    __asm__ __volatile__
+    ("mov.w %2,%0\n\t"
+     "mov.w %1,%2"
+    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 4:
+    __asm__ __volatile__
+    ("mov.l %2,%0\n\t"
+     "mov.l %1,%2"
+    : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  default:
+    tmp = 0;	  
+  }
+  local_irq_restore(flags);
+  return tmp;
+}
+
+#define HARD_RESET_NOW() ({		\
+        local_irq_disable();		\
+        asm("jmp @@0");			\
+})
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* _H8300_SYSTEM_H */
diff --git a/arch/h8300/include/asm/target_time.h b/arch/h8300/include/asm/target_time.h
new file mode 100644
index 00000000000..9f2a9aa1fe6
--- /dev/null
+++ b/arch/h8300/include/asm/target_time.h
@@ -0,0 +1,4 @@
+extern int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *));
+extern void platform_timer_eoi(void);
+extern void platform_gettod(unsigned int *year, unsigned int *mon, unsigned int *day, 
+                            unsigned int *hour, unsigned int *min, unsigned int *sec);
diff --git a/arch/h8300/include/asm/termbits.h b/arch/h8300/include/asm/termbits.h
new file mode 100644
index 00000000000..31eca81db3f
--- /dev/null
+++ b/arch/h8300/include/asm/termbits.h
@@ -0,0 +1,200 @@
+#ifndef __ARCH_H8300_TERMBITS_H__
+#define __ARCH_H8300_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* input baud rate */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	  16			/* shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ARCH_H8300_TERMBITS_H__ */
diff --git a/arch/h8300/include/asm/termios.h b/arch/h8300/include/asm/termios.h
new file mode 100644
index 00000000000..70eea64b421
--- /dev/null
+++ b/arch/h8300/include/asm/termios.h
@@ -0,0 +1,92 @@
+#ifndef _H8300_TERMIOS_H
+#define _H8300_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+ 
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	get_user((termios)->c_line, &(termio)->c_line); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif /* _H8300_TERMIOS_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
new file mode 100644
index 00000000000..aafd4d322ec
--- /dev/null
+++ b/arch/h8300/include/asm/thread_info.h
@@ -0,0 +1,104 @@
+/* thread_info.h: h8300 low-level thread information
+ * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long	   flags;		/* low level flags */
+	int		   cpu;			/* cpu we're on */
+	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
+	struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.flags =	0,			\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192	/* 2 pages */
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__(
+		"mov.l	sp, %0 \n\t"
+		"and.l	%1, %0"
+		: "=&r"(ti)
+		: "i" (~(THREAD_SIZE-1))
+		);
+	return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK		0
+#define TI_EXECDOMAIN	4
+#define TI_FLAGS	8
+#define TI_CPU		12
+#define TI_PRE_COUNT	16
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		4
+#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/h8300/include/asm/timex.h b/arch/h8300/include/asm/timex.h
new file mode 100644
index 00000000000..23e67013439
--- /dev/null
+++ b/arch/h8300/include/asm/timex.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm-h8300/timex.h
+ *
+ * H8/300 architecture timex specifications
+ */
+#ifndef _ASM_H8300_TIMEX_H
+#define _ASM_H8300_TIMEX_H
+
+#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */
+
+typedef unsigned long cycles_t;
+extern short h8300_timer_count;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/h8300/include/asm/tlb.h b/arch/h8300/include/asm/tlb.h
new file mode 100644
index 00000000000..3dea80ad9e6
--- /dev/null
+++ b/arch/h8300/include/asm/tlb.h
@@ -0,0 +1,23 @@
+/* 
+  include/asm-h8300/tlb.h 
+*/
+
+#ifndef __H8300_TLB_H__
+#define __H8300_TLB_H__
+
+#define tlb_flush(tlb)	do { } while(0)
+
+/* 
+  include/asm-h8300/tlb.h 
+*/
+
+#ifndef __H8300_TLB_H__
+#define __H8300_TLB_H__
+
+#define tlb_flush(tlb)	do { } while(0)
+
+#include <asm-generic/tlb.h>
+
+#endif
+
+#endif
diff --git a/arch/h8300/include/asm/tlbflush.h b/arch/h8300/include/asm/tlbflush.h
new file mode 100644
index 00000000000..41c148a9208
--- /dev/null
+++ b/arch/h8300/include/asm/tlbflush.h
@@ -0,0 +1,55 @@
+#ifndef _H8300_TLBFLUSH_H
+#define _H8300_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+				   unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+	BUG();
+}
+
+#endif /* _H8300_TLBFLUSH_H */
diff --git a/arch/h8300/include/asm/topology.h b/arch/h8300/include/asm/topology.h
new file mode 100644
index 00000000000..fdc121924d4
--- /dev/null
+++ b/arch/h8300/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_H8300_TOPOLOGY_H
+#define _ASM_H8300_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_H8300_TOPOLOGY_H */
diff --git a/arch/h8300/include/asm/traps.h b/arch/h8300/include/asm/traps.h
new file mode 100644
index 00000000000..41cf6be02f6
--- /dev/null
+++ b/arch/h8300/include/asm/traps.h
@@ -0,0 +1,37 @@
+/*
+ *  linux/include/asm-h8300/traps.h
+ *
+ *  Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _H8300_TRAPS_H
+#define _H8300_TRAPS_H
+
+extern void system_call(void);
+extern void interrupt_entry(void);
+extern void trace_break(void);
+
+#define JMP_OP 0x5a000000
+#define JSR_OP 0x5e000000
+#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
+#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
+
+#define TRACE_VEC 5
+
+#define TRAP0_VEC 8
+#define TRAP1_VEC 9
+#define TRAP2_VEC 10
+#define TRAP3_VEC 11
+
+#if defined(__H8300H__)
+#define NR_TRAPS 12
+#endif
+#if defined(__H8300S__)
+#define NR_TRAPS 16
+#endif
+
+#endif /* _H8300_TRAPS_H */
diff --git a/arch/h8300/include/asm/types.h b/arch/h8300/include/asm/types.h
new file mode 100644
index 00000000000..12875190b15
--- /dev/null
+++ b/arch/h8300/include/asm/types.h
@@ -0,0 +1,33 @@
+#ifndef _H8300_TYPES_H
+#define _H8300_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#if !defined(__ASSEMBLY__)
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+typedef unsigned short umode_t;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _H8300_TYPES_H */
diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h
new file mode 100644
index 00000000000..356068cd087
--- /dev/null
+++ b/arch/h8300/include/asm/uaccess.h
@@ -0,0 +1,162 @@
+#ifndef __H8300_UACCESS_H
+#define __H8300_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/* We let the MMU do all checking */
+#define access_ok(type, addr, size) __access_ok((unsigned long)addr,size)
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+#define	RANGE_CHECK_OK(addr, size, lower, upper) \
+	(((addr) >= (lower)) && (((addr) + (size)) < (upper)))
+
+	extern unsigned long _ramend;
+	return(RANGE_CHECK_OK(addr, size, 0L, (unsigned long)&_ramend));
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr)				\
+({							\
+    int __pu_err = 0;					\
+    typeof(*(ptr)) __pu_val = (x);			\
+    switch (sizeof (*(ptr))) {				\
+    case 1:						\
+    case 2:						\
+    case 4:						\
+	*(ptr) = (__pu_val);   	        		\
+	break;						\
+    case 8:						\
+	memcpy(ptr, &__pu_val, sizeof (*(ptr)));        \
+	break;						\
+    default:						\
+	__pu_err = __put_user_bad();			\
+	break;						\
+    }							\
+    __pu_err;						\
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define get_user(x, ptr)					\
+({								\
+    int __gu_err = 0;						\
+    typeof(*(ptr)) __gu_val = *ptr;				\
+    switch (sizeof(*(ptr))) {					\
+    case 1:							\
+    case 2:							\
+    case 4:							\
+    case 8: 							\
+	break;							\
+    default:							\
+	__gu_err = __get_user_bad();				\
+	__gu_val = 0;						\
+	break;							\
+    }								\
+    (x) = __gu_val;						\
+    __gu_err;							\
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+	char *tmp;
+	strncpy(dst, src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+	return(strlen(src) + 1); /* DAVIDM make safer */
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+clear_user(void *to, unsigned long n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
+#endif /* _H8300_UACCESS_H */
diff --git a/arch/h8300/include/asm/ucontext.h b/arch/h8300/include/asm/ucontext.h
new file mode 100644
index 00000000000..0bcf8f85fab
--- /dev/null
+++ b/arch/h8300/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _H8300_UCONTEXT_H
+#define _H8300_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/arch/h8300/include/asm/unaligned.h b/arch/h8300/include/asm/unaligned.h
new file mode 100644
index 00000000000..b8d06c70c2d
--- /dev/null
+++ b/arch/h8300/include/asm/unaligned.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_H8300_UNALIGNED_H
+#define _ASM_H8300_UNALIGNED_H
+
+#include <linux/unaligned/be_memmove.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_H8300_UNALIGNED_H */
diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h
new file mode 100644
index 00000000000..99f3c3561ec
--- /dev/null
+++ b/arch/h8300/include/asm/unistd.h
@@ -0,0 +1,364 @@
+#ifndef _ASM_H8300_UNISTD_H_
+#define _ASM_H8300_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_madvise1		219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 320
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ */
+#define cond_syscall(name)						\
+  asm (".weak\t_" #name "\n"				\
+       ".set\t_" #name ",_sys_ni_syscall");
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_H8300_UNISTD_H_ */
diff --git a/arch/h8300/include/asm/user.h b/arch/h8300/include/asm/user.h
new file mode 100644
index 00000000000..14a9e18950f
--- /dev/null
+++ b/arch/h8300/include/asm/user.h
@@ -0,0 +1,75 @@
+#ifndef _H8300_USER_H
+#define _H8300_USER_H
+
+#include <asm/page.h>
+
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+   is still the layout used by user (the new pt_regs doesn't have
+   all registers). */
+struct user_regs_struct {
+	long er1,er2,er3,er4,er5,er6;
+	long er0;
+	long usp;
+	long orig_er0;
+	short ccr;
+	long pc;
+};
+
+	
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;	/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/arch/h8300/include/asm/virtconvert.h b/arch/h8300/include/asm/virtconvert.h
new file mode 100644
index 00000000000..19cfd62b11c
--- /dev/null
+++ b/arch/h8300/include/asm/virtconvert.h
@@ -0,0 +1,20 @@
+#ifndef __H8300_VIRT_CONVERT__
+#define __H8300_VIRT_CONVERT__
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+#endif
+#endif
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index b1f25c20a5d..7fda657110e 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/fb.h>
 #include <linux/console.h>
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index e4f4199f97a..9942f24aff9 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -40,9 +40,6 @@
 
 #undef DEBUG
 
-extern void die_if_kernel(char *,struct pt_regs *,long);
-extern void free_initmem(void);
-
 /*
  * BAD_PAGE is the page that is used for page faults when linux
  * is out-of-memory. Older versions of linux just did a
@@ -64,33 +61,6 @@ unsigned long empty_zero_page;
 
 extern unsigned long rom_length;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk("\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk("%d pages of RAM\n",total);
-    printk("%d free pages\n",free);
-    printk("%d reserved pages\n",reserved);
-    printk("%d pages shared\n",shared);
-    printk("%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
@@ -100,7 +70,7 @@ extern unsigned long memory_end;
  * The parameters are pointers to where to stick the starting and ending
  * addresses of available kernel virtual memory.
  */
-void paging_init(void)
+void __init paging_init(void)
 {
 	/*
 	 * Make sure start_mem is page aligned,  otherwise bootmem and
@@ -149,7 +119,7 @@ void paging_init(void)
 	}
 }
 
-void mem_init(void)
+void __init mem_init(void)
 {
 	int codek = 0, datak = 0, initk = 0;
 	/* DAVIDM look at setup memory map generically with reserved area */
@@ -205,7 +175,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #endif
 
 void
-free_initmem()
+free_initmem(void)
 {
 #ifdef CONFIG_RAMKERNEL
 	unsigned long addr;
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 18bcc10903b..48e496fe1e7 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -171,8 +171,8 @@ config IA64_SGI_SN2
 	  to select this option.  If in doubt, select ia64 generic support
 	  instead.
 
-config IA64_SGI_UV`
-	bool "SGI-UV`"
+config IA64_SGI_UV
+	bool "SGI-UV"
 	select NUMA
 	select ACPI_NUMA
 	select SWIOTLB
@@ -321,10 +321,10 @@ config SMP
 	  If you don't know what to do here, say N.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-1024)"
-	range 2 1024
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
 	depends on SMP
-	default "1024"
+	default "4096"
 	help
 	  You should set this to the number of CPUs in your system, but
 	  keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
@@ -540,8 +540,8 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	  bool "kernel crash dumps (EXPERIMENTAL)"
-	  depends on EXPERIMENTAL && IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+	  bool "kernel crash dumps"
+	  depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
 	  help
 	    Generate crash dump after being started by kexec.
 
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index e67ee3f2769..905d25b13d5 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -100,3 +100,9 @@ define archhelp
   echo '  boot		- Build vmlinux and bootloader for Ski simulator'
   echo '* unwcheck	- Check vmlinux for invalid unwind info'
 endef
+
+archprepare: make_nr_irqs_h FORCE
+PHONY += make_nr_irqs_h FORCE
+
+make_nr_irqs_h: FORCE
+	$(Q)$(MAKE) $(build)=arch/ia64/kernel include/asm-ia64/nr-irqs.h
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 0210545e7f6..9f483976228 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -1,20 +1,16 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 13:55:32 2007
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 15:38:01 2008
 #
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -23,20 +19,34 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=20
-# CONFIG_CPUSETS is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -44,6 +54,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -53,12 +64,30 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -68,6 +97,8 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -81,6 +112,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Processor type and features
@@ -91,22 +123,28 @@ CONFIG_ZONE_DMA=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_UNCACHED_ALLOCATOR=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
 # CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_SGI_UV is not set
 # CONFIG_IA64_HP_SIM is not set
 # CONFIG_ITANIUM is not set
 CONFIG_MCKINLEY=y
@@ -116,22 +154,26 @@ CONFIG_MCKINLEY=y
 CONFIG_IA64_PAGE_SIZE_64KB=y
 CONFIG_PGTABLE_3=y
 # CONFIG_PGTABLE_4 is not set
+CONFIG_HZ=250
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_IA64_L1_CACHE_SHIFT=7
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=17
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
 CONFIG_SMP=y
-CONFIG_NR_CPUS=512
+CONFIG_NR_CPUS=4096
 CONFIG_HOTPLUG_CPU=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PERMIT_BSP_REMOVE is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
@@ -141,6 +183,8 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
@@ -148,6 +192,7 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_NR_QUICK=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_MMU_NOTIFIER=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -162,12 +207,14 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
+CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
 # CONFIG_IA64_MC_ERR_INJECT is not set
 CONFIG_SGI_SN=y
 # CONFIG_IA64_ESI is not set
+# CONFIG_IA64_HP_AML_NFW is not set
 
 #
 # SN Devices
@@ -179,6 +226,7 @@ CONFIG_CRASH_DUMP=y
 #
 # Firmware Drivers
 #
+# CONFIG_FIRMWARE_MEMMAP is not set
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
 CONFIG_DMIID=y
@@ -189,24 +237,25 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
 CONFIG_ACPI=y
 CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
-# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_DOCK=y
+# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
+# CONFIG_ACPI_CUSTOM_DSDT is not set
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -225,6 +274,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -233,15 +283,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 # CONFIG_HOTPLUG_PCI_CPCI is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 # CONFIG_HOTPLUG_PCI_SGI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -254,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -273,6 +316,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -280,8 +324,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -298,10 +340,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -309,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -330,13 +369,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_PNP=y
@@ -360,25 +403,35 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=y
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_SGI_XP=m
+# CONFIG_HP_ILO is not set
+CONFIG_SGI_GRU=m
+# CONFIG_SGI_GRU_DEBUG is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 CONFIG_BLK_DEV_IDESCSI=m
@@ -390,25 +443,26 @@ CONFIG_IDE_PROC_FS=y
 # IDE chipset support/bugfixes
 #
 # CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -425,10 +479,7 @@ CONFIG_BLK_DEV_SGIIOC4=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -468,10 +519,8 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -481,6 +530,8 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -491,12 +542,14 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
@@ -505,7 +558,68 @@ CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+CONFIG_ATA_NONSTANDARD=y
+CONFIG_ATA_ACPI=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+CONFIG_ATA_PIIX=y
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ACPI is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -522,36 +636,52 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
 CONFIG_FUSION_SAS=y
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
@@ -569,13 +699,16 @@ CONFIG_TULIP=m
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 CONFIG_EEPRO100=m
 CONFIG_E100=m
 # CONFIG_FEALNX is not set
@@ -583,17 +716,22 @@ CONFIG_E100=m
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+CONFIG_IGB=y
+# CONFIG_IGB_LRO is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -606,14 +744,20 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -621,6 +765,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -629,7 +774,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -637,8 +781,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
@@ -660,7 +804,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -709,9 +852,11 @@ CONFIG_GAMEPORT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -719,15 +864,16 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
 CONFIG_SGI_SNSC=y
 CONFIG_SGI_TIOCX=y
 CONFIG_SGI_MBCS=m
@@ -759,76 +905,100 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_EFI_RTC=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-CONFIG_AGP=m
-CONFIG_AGP_I460=m
-CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_SGI_TIOCA=m
-CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=m
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -836,15 +1006,7 @@ CONFIG_DAB=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -862,22 +1024,18 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -886,10 +1044,12 @@ CONFIG_SND_MPU401=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
@@ -912,10 +1072,10 @@ CONFIG_SND_EMU10K1=m
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
 CONFIG_SND_FM801=m
-# CONFIG_SND_FM801_TEA575X_BOOL is not set
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -933,29 +1093,19 @@ CONFIG_SND_FM801=m
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -976,6 +1126,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -984,17 +1135,17 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1008,6 +1159,7 @@ CONFIG_USB_UHCI_HCD=m
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1027,7 +1179,9 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1040,10 +1194,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1069,67 +1219,32 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
 # CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
 # CONFIG_INFINIBAND_AMSO1100 is not set
 # CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_CM is not set
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 # CONFIG_INFINIBAND_SRP is not set
 # CONFIG_INFINIBAND_ISER is not set
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
-# CONFIG_MSPEC is not set
+CONFIG_MSPEC=m
 
 #
 # File systems
@@ -1145,7 +1260,6 @@ CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1157,17 +1271,15 @@ CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
 # CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1205,7 +1317,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1220,32 +1331,30 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
@@ -1281,10 +1390,6 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1325,22 +1430,24 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -1358,16 +1465,12 @@ CONFIG_IRQ_PER_CPU=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1375,10 +1478,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1388,10 +1495,15 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1405,41 +1517,85 @@ CONFIG_SYSVIPC_COMPAT=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
deleted file mode 100644
index 7f6b2377d13..00000000000
--- a/arch/ia64/configs/sn2_defconfig
+++ /dev/null
@@ -1,1285 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 16:03:40 2007
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-CONFIG_IA64_SGI_SN2=y
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_IOSAPIC=y
-CONFIG_IA64_SGI_SN_XP=m
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=1024
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=10
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IA64_MC_ERR_INJECT=y
-CONFIG_SGI_SN=y
-# CONFIG_IA64_ESI is not set
-# CONFIG_IA64_HP_AML_NFW is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC3=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROC_EVENT=y
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_PROCESSOR is not set
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCIEAER=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_SGI=y
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SGIIOC4=y
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SCSI_SAS_ATA is not set
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_ATA_ACPI=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_MULTIPATH=y
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LOGGING=y
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-# CONFIG_CHELSIO_T1_NAPI is not set
-CONFIG_CHELSIO_T3=m
-CONFIG_IXGBE=m
-# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_UNICODE is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_IOC3=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_MMTIMER=y
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=y
-CONFIG_AGP_SGI_TIOCA=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-CONFIG_MSPEC=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 1c44ec2a1d5..88b6e6f3fd8 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -186,9 +186,10 @@ hwsw_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-hwsw_dma_mapping_error (dma_addr_t dma_addr)
+hwsw_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr);
+	return hwiommu_dma_mapping_error(dev, dma_addr) ||
+		swiotlb_dma_mapping_error(dev, dma_addr);
 }
 
 EXPORT_SYMBOL(hwsw_dma_mapping_error);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 34421aed1e2..4956be40d7b 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2147,7 +2147,7 @@ sba_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-sba_dma_mapping_error (dma_addr_t dma_addr)
+sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 23cafc80d2a..24b1ad5334c 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -193,18 +193,6 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
  * -------------------------------------------------------------------
  */
 
-#if 0
-/*
- * not really used in our situation so keep them commented out for now
- */
-static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
-static void do_serial_bh(void)
-{
-	run_task_queue(&tq_serial);
-	printk(KERN_ERR "do_serial_bh: called\n");
-}
-#endif
-
 static void do_softint(struct work_struct *private_)
 {
 	printk(KERN_ERR "simserial: do_softint called\n");
@@ -351,11 +339,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
 	info->xmit.head = info->xmit.tail = 0;
 	local_irq_restore(flags);
 
-	wake_up_interruptible(&tty->write_wait);
-
-	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-	    tty->ldisc.write_wakeup)
-		(tty->ldisc.write_wakeup)(tty);
+	tty_wakeup(tty);
 }
 
 /*
@@ -404,12 +388,6 @@ static void rs_unthrottle(struct tty_struct * tty)
 	printk(KERN_INFO "simrs_unthrottle called\n");
 }
 
-/*
- * rs_break() --- routine which turns the break handling on or off
- */
-static void rs_break(struct tty_struct *tty, int break_state)
-{
-}
 
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
@@ -422,14 +400,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 	}
 
 	switch (cmd) {
-		case TIOCMGET:
-			printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
-			return -EINVAL;
-		case TIOCMBIS:
-		case TIOCMBIC:
-		case TIOCMSET:
-			printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
-			return -EINVAL;
 		case TIOCGSERIAL:
 			printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
 			return 0;
@@ -488,14 +458,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 
 static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
-	unsigned int cflag = tty->termios->c_cflag;
-
-	if (   (cflag == old_termios->c_cflag)
-	    && (   RELEVANT_IFLAG(tty->termios->c_iflag)
-		== RELEVANT_IFLAG(old_termios->c_iflag)))
-	  return;
-
-
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) &&
 	    !(tty->termios->c_cflag & CRTSCTS)) {
@@ -623,9 +585,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	shutdown(info);
-	if (tty->ops->flush_buffer)
-		tty->ops->flush_buffer(tty);
-	if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+	rs_flush_buffer(tty);
+	tty_ldisc_flush(tty);
 	info->event = 0;
 	info->tty = NULL;
 	if (info->blocked_open) {
@@ -955,7 +916,6 @@ static const struct tty_operations hp_ops = {
 	.stop = rs_stop,
 	.start = rs_start,
 	.hangup = rs_hangup,
-	.break_ctl = rs_break,
 	.wait_until_sent = rs_wait_until_sent,
 	.read_proc = rs_read_proc,
 };
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index 06efd1f9b80..ff88c48c5d1 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -262,7 +262,7 @@ ia32_syscall_table:
 	data8 sys_uselib
 	data8 sys_swapon
 	data8 sys_reboot
-	data8 sys32_readdir
+	data8 compat_sys_old_readdir
 	data8 sys32_mmap	  /* 90 */
 	data8 sys32_munmap
 	data8 sys_truncate
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
index c5c872b250d..dd0c53687a9 100644
--- a/arch/ia64/ia32/ia32priv.h
+++ b/arch/ia64/ia32/ia32priv.h
@@ -276,13 +276,6 @@ typedef struct compat_siginfo {
 	} _sifields;
 } compat_siginfo_t;
 
-struct old_linux32_dirent {
-	u32	d_ino;
-	u32	d_offset;
-	u16	d_namlen;
-	char	d_name[1];
-};
-
 /*
  * IA-32 ELF specific definitions for IA-64.
  */
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 7e028ceb93b..bf196cbb379 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1139,7 +1139,7 @@ sys32_pipe (int __user *fd)
 	int retval;
 	int fds[2];
 
-	retval = do_pipe(fds);
+	retval = do_pipe_flags(fds, 0);
 	if (retval)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
@@ -1210,138 +1210,6 @@ sys32_settimeofday (struct compat_timeval __user *tv, struct timezone __user *tz
 	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-struct getdents32_callback {
-	struct compat_dirent __user *current_dir;
-	struct compat_dirent __user *previous;
-	int count;
-	int error;
-};
-
-struct readdir32_callback {
-	struct old_linux32_dirent __user * dirent;
-	int count;
-};
-
-static int
-filldir32 (void *__buf, const char *name, int namlen, loff_t offset, u64 ino,
-	   unsigned int d_type)
-{
-	struct compat_dirent __user * dirent;
-	struct getdents32_callback * buf = (struct getdents32_callback *) __buf;
-	int reclen = ROUND_UP(offsetof(struct compat_dirent, d_name) + namlen + 1, 4);
-	u32 d_ino;
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->error = -EFAULT;	/* only used if we fail.. */
-	dirent = buf->previous;
-	if (dirent)
-		if (put_user(offset, &dirent->d_off))
-			return -EFAULT;
-	dirent = buf->current_dir;
-	buf->previous = dirent;
-	if (put_user(d_ino, &dirent->d_ino)
-	    || put_user(reclen, &dirent->d_reclen)
-	    || copy_to_user(dirent->d_name, name, namlen)
-	    || put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
-	dirent = (struct compat_dirent __user *) ((char __user *) dirent + reclen);
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage long
-sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned int count)
-{
-	struct file * file;
-	struct compat_dirent __user * lastdirent;
-	struct getdents32_callback buf;
-	int error;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, count))
-		goto out;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, filldir32, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		if (put_user(file->f_pos, &lastdirent->d_off))
-			error = -EFAULT;
-		else
-			error = count - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-static int
-fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, u64 ino,
-	      unsigned int d_type)
-{
-	struct readdir32_callback * buf = (struct readdir32_callback *) __buf;
-	struct old_linux32_dirent __user * dirent;
-	u32 d_ino;
-
-	if (buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->count++;
-	dirent = buf->dirent;
-	if (put_user(d_ino, &dirent->d_ino)
-	    || put_user(offset, &dirent->d_offset)
-	    || put_user(namlen, &dirent->d_namlen)
-	    || copy_to_user(dirent->d_name, name, namlen)
-	    || put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage long
-sys32_readdir (unsigned int fd, void __user *dirent, unsigned int count)
-{
-	int error;
-	struct file * file;
-	struct readdir32_callback buf;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.count = 0;
-	buf.dirent = dirent;
-
-	error = vfs_readdir(file, fillonedir32, &buf);
-	if (error >= 0)
-		error = buf.count;
-	fput(file);
-out:
-	return error;
-}
-
 struct sel_arg_struct {
 	unsigned int n;
 	unsigned int inp;
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
new file mode 100644
index 00000000000..ccbe8ae47a6
--- /dev/null
+++ b/arch/ia64/include/asm/Kbuild
@@ -0,0 +1,16 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += break.h
+header-y += fpu.h
+header-y += fpswa.h
+header-y += ia64regs.h
+header-y += intel_intrin.h
+header-y += perfmon_default_smpl.h
+header-y += ptrace_offsets.h
+header-y += rse.h
+header-y += ucontext.h
+
+unifdef-y += gcc_intrin.h
+unifdef-y += intrinsics.h
+unifdef-y += perfmon.h
+unifdef-y += ustack.h
diff --git a/arch/ia64/include/asm/a.out.h b/arch/ia64/include/asm/a.out.h
new file mode 100644
index 00000000000..193dcfb6759
--- /dev/null
+++ b/arch/ia64/include/asm/a.out.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_IA64_A_OUT_H
+#define _ASM_IA64_A_OUT_H
+
+/*
+ * No a.out format has been (or should be) defined so this file is
+ * just a dummy that allows us to get binfmt_elf compiled.  It
+ * probably would be better to clean up binfmt_elf.c so it does not
+ * necessarily depend on there being a.out support.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <linux/types.h>
+
+struct exec {
+	unsigned long a_info;
+	unsigned long a_text;
+	unsigned long a_data;
+	unsigned long a_bss;
+	unsigned long a_entry;
+};
+
+#define N_TXTADDR(x)	0
+#define N_DATADDR(x)	0
+#define N_BSSADDR(x)	0
+#define N_DRSIZE(x)	0
+#define N_TRSIZE(x)	0
+#define N_SYMSIZE(x)	0
+#define N_TXTOFF(x)	0
+
+#endif /* _ASM_IA64_A_OUT_H */
diff --git a/arch/ia64/include/asm/acpi-ext.h b/arch/ia64/include/asm/acpi-ext.h
new file mode 100644
index 00000000000..734d137dda6
--- /dev/null
+++ b/arch/ia64/include/asm/acpi-ext.h
@@ -0,0 +1,21 @@
+/*
+ * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P.
+ *	Alex Williamson <alex.williamson@hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vendor specific extensions to ACPI.
+ */
+
+#ifndef _ASM_IA64_ACPI_EXT_H
+#define _ASM_IA64_ACPI_EXT_H
+
+#include <linux/types.h>
+#include <acpi/actypes.h>
+
+extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length);
+
+#endif /* _ASM_IA64_ACPI_EXT_H */
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
new file mode 100644
index 00000000000..0f82cc2934e
--- /dev/null
+++ b/arch/ia64/include/asm/acpi.h
@@ -0,0 +1,165 @@
+/*
+ *  Copyright (C) 1999 VA Linux Systems
+ *  Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
+ *  Copyright (C) 2001,2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+#ifdef __KERNEL__
+
+#include <acpi/pdc_intel.h>
+
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <asm/system.h>
+#include <asm/numa.h>
+
+#define COMPILER_DEPENDENT_INT64	long
+#define COMPILER_DEPENDENT_UINT64	unsigned long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS()  local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()
+
+static inline int
+ia64_acpi_acquire_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+		val = ia64_cmpxchg4_acq(lock, new, old);
+	} while (unlikely (val != old));
+	return (new < 3) ? -1 : 0;
+}
+
+static inline int
+ia64_acpi_release_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = old & ~0x3;
+		val = ia64_cmpxchg4_acq(lock, new, old);
+	} while (unlikely (val != old));
+	return old & 0x1;
+}
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq)				\
+	((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq)				\
+	((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
+
+#define acpi_disabled 0	/* ACPI always enabled on IA64 */
+#define acpi_noirq 0	/* ACPI always enabled on IA64 */
+#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
+#define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
+static inline void disable_acpi(void) { }
+
+const char *acpi_get_sysname (void);
+int acpi_request_vector (u32 int_type);
+int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+extern unsigned long acpi_wakeup_address;
+
+/*
+ * Record the cpei override flag and current logical cpu. This is
+ * useful for CPU removal.
+ */
+extern unsigned int can_cpei_retarget(void);
+extern unsigned int is_cpu_cpei_target(unsigned int cpu);
+extern void set_cpei_target_cpu(unsigned int cpu);
+extern unsigned int get_cpei_target_cpu(void);
+extern void prefill_possible_map(void);
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+extern int additional_cpus;
+#else
+#define additional_cpus 0
+#endif
+
+#ifdef CONFIG_ACPI_NUMA
+#if MAX_NUMNODES > 256
+#define MAX_PXM_DOMAINS MAX_NUMNODES
+#else
+#define MAX_PXM_DOMAINS (256)
+#endif
+extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS];
+extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
+#endif
+
+#define acpi_unlazy_tlb(x)
+
+#ifdef CONFIG_ACPI_NUMA
+extern cpumask_t early_cpu_possible_map;
+#define for_each_possible_early_cpu(cpu)  \
+	for_each_cpu_mask((cpu), early_cpu_possible_map)
+
+static inline void per_cpu_scan_finalize(int min_cpus, int reserve_cpus)
+{
+	int low_cpu, high_cpu;
+	int cpu;
+	int next_nid = 0;
+
+	low_cpu = cpus_weight(early_cpu_possible_map);
+
+	high_cpu = max(low_cpu, min_cpus);
+	high_cpu = min(high_cpu + reserve_cpus, NR_CPUS);
+
+	for (cpu = low_cpu; cpu < high_cpu; cpu++) {
+		cpu_set(cpu, early_cpu_possible_map);
+		if (node_cpuid[cpu].nid == NUMA_NO_NODE) {
+			node_cpuid[cpu].nid = next_nid;
+			next_nid++;
+			if (next_nid >= num_online_nodes())
+				next_nid = 0;
+		}
+	}
+}
+#endif /* CONFIG_ACPI_NUMA */
+
+#endif /*__KERNEL__*/
+
+#endif /*_ASM_ACPI_H*/
diff --git a/arch/ia64/include/asm/agp.h b/arch/ia64/include/asm/agp.h
new file mode 100644
index 00000000000..c11fdd8ab4d
--- /dev/null
+++ b/arch/ia64/include/asm/agp.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_IA64_AGP_H
+#define _ASM_IA64_AGP_H
+
+/*
+ * IA-64 specific AGP definitions.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * To avoid memory-attribute aliasing issues, we require that the AGPGART engine operate
+ * in coherent mode, which lets us map the AGP memory as normal (write-back) memory
+ * (unlike x86, where it gets mapped "write-coalescing").
+ */
+#define map_page_into_agp(page)		/* nothing */
+#define unmap_page_from_agp(page)	/* nothing */
+#define flush_agp_cache()		mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif /* _ASM_IA64_AGP_H */
diff --git a/arch/ia64/include/asm/asmmacro.h b/arch/ia64/include/asm/asmmacro.h
new file mode 100644
index 00000000000..c1642fd6402
--- /dev/null
+++ b/arch/ia64/include/asm/asmmacro.h
@@ -0,0 +1,135 @@
+#ifndef _ASM_IA64_ASMMACRO_H
+#define _ASM_IA64_ASMMACRO_H
+
+/*
+ * Copyright (C) 2000-2001, 2003-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#define ENTRY(name)				\
+	.align 32;				\
+	.proc name;				\
+name:
+
+#define ENTRY_MIN_ALIGN(name)			\
+	.align 16;				\
+	.proc name;				\
+name:
+
+#define GLOBAL_ENTRY(name)			\
+	.global name;				\
+	ENTRY(name)
+
+#define END(name)				\
+	.endp name
+
+/*
+ * Helper macros to make unwind directives more readable:
+ */
+
+/* prologue_gr: */
+#define ASM_UNW_PRLG_RP			0x8
+#define ASM_UNW_PRLG_PFS		0x4
+#define ASM_UNW_PRLG_PSP		0x2
+#define ASM_UNW_PRLG_PR			0x1
+#define ASM_UNW_PRLG_GRSAVE(ninputs)	(32+(ninputs))
+
+/*
+ * Helper macros for accessing user memory.
+ *
+ * When adding any new .section/.previous entries here, make sure to
+ * also add it to the DISCARD section in arch/ia64/kernel/gate.lds.S or
+ * unpleasant things will happen.
+ */
+
+	.section "__ex_table", "a"		// declare section & section attributes
+	.previous
+
+# define EX(y,x...)				\
+	.xdata4 "__ex_table", 99f-., y-.;	\
+  [99:]	x
+# define EXCLR(y,x...)				\
+	.xdata4 "__ex_table", 99f-., y-.+4;	\
+  [99:]	x
+
+/*
+ * Tag MCA recoverable instruction ranges.
+ */
+
+	.section "__mca_table", "a"		// declare section & section attributes
+	.previous
+
+# define MCA_RECOVER_RANGE(y)			\
+	.xdata4 "__mca_table", y-., 99f-.;	\
+  [99:]
+
+/*
+ * Mark instructions that need a load of a virtual address patched to be
+ * a load of a physical address.  We use this either in critical performance
+ * path (ivt.S - TLB miss processing) or in places where it might not be
+ * safe to use a "tpa" instruction (mca_asm.S - error recovery).
+ */
+	.section ".data.patch.vtop", "a"	// declare section & section attributes
+	.previous
+
+#define	LOAD_PHYSICAL(pr, reg, obj)		\
+[1:](pr)movl reg = obj;				\
+	.xdata4 ".data.patch.vtop", 1b-.
+
+/*
+ * For now, we always put in the McKinley E9 workaround.  On CPUs that don't need it,
+ * we'll patch out the work-around bundles with NOPs, so their impact is minimal.
+ */
+#define DO_MCKINLEY_E9_WORKAROUND
+
+#ifdef DO_MCKINLEY_E9_WORKAROUND
+	.section ".data.patch.mckinley_e9", "a"
+	.previous
+/* workaround for Itanium 2 Errata 9: */
+# define FSYS_RETURN					\
+	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
+1:{ .mib;						\
+	nop.m 0;					\
+	mov r16=ar.pfs;					\
+	br.call.sptk.many b7=2f;;			\
+  };							\
+2:{ .mib;						\
+	nop.m 0;					\
+	mov ar.pfs=r16;					\
+	br.ret.sptk.many b6;;				\
+  }
+#else
+# define FSYS_RETURN	br.ret.sptk.many b6
+#endif
+
+/*
+ * If physical stack register size is different from DEF_NUM_STACK_REG,
+ * dynamically patch the kernel for correct size.
+ */
+	.section ".data.patch.phys_stack_reg", "a"
+	.previous
+#define LOAD_PHYS_STACK_REG_SIZE(reg)			\
+[1:]	adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0;	\
+	.xdata4 ".data.patch.phys_stack_reg", 1b-.
+
+/*
+ * Up until early 2004, use of .align within a function caused bad unwind info.
+ * TEXT_ALIGN(n) expands into ".align n" if a fixed GAS is available or into nothing
+ * otherwise.
+ */
+#ifdef HAVE_WORKING_TEXT_ALIGN
+# define TEXT_ALIGN(n)	.align n
+#else
+# define TEXT_ALIGN(n)
+#endif
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define dv_serialize_data		.serialize.data
+# define dv_serialize_instruction	.serialize.instruction
+#else
+# define dv_serialize_data
+# define dv_serialize_instruction
+#endif
+
+#endif /* _ASM_IA64_ASMMACRO_H */
diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h
new file mode 100644
index 00000000000..50c2b83fd5a
--- /dev/null
+++ b/arch/ia64/include/asm/atomic.h
@@ -0,0 +1,226 @@
+#ifndef _ASM_IA64_ATOMIC_H
+#define _ASM_IA64_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * NOTE: don't mess with the types below!  The "unsigned long" and
+ * "int" types were carefully placed so as to ensure proper operation
+ * of the macros.
+ *
+ * Copyright (C) 1998, 1999, 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/types.h>
+
+#include <asm/intrinsics.h>
+#include <asm/system.h>
+
+/*
+ * On IA-64, counter must always be volatile to ensure that that the
+ * memory accesses are ordered.
+ */
+typedef struct { volatile __s32 counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		((atomic_t) { (i) })
+#define ATOMIC64_INIT(i)	((atomic64_t) { (i) })
+
+#define atomic_read(v)		((v)->counter)
+#define atomic64_read(v)	((v)->counter)
+
+#define atomic_set(v,i)		(((v)->counter) = (i))
+#define atomic64_set(v,i)	(((v)->counter) = (i))
+
+static __inline__ int
+ia64_atomic_add (int i, atomic_t *v)
+{
+	__s32 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old + i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic64_add (__s64 i, atomic64_t *v)
+{
+	__s64 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic64_read(v);
+		new = old + i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic_sub (int i, atomic_t *v)
+{
+	__s32 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old - i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic64_sub (__s64 i, atomic64_t *v)
+{
+	__s64 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic64_read(v);
+		new = old - i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+	return new;
+}
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#define atomic64_cmpxchg(v, old, new) \
+	(cmpxchg(&((v)->counter), old, new))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#define atomic_add_return(i,v)						\
+({									\
+	int __ia64_aar_i = (i);						\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
+	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
+	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
+	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic_add(__ia64_aar_i, v);			\
+})
+
+#define atomic64_add_return(i,v)					\
+({									\
+	long __ia64_aar_i = (i);					\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
+	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
+	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
+	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic64_add(__ia64_aar_i, v);			\
+})
+
+/*
+ * Atomically add I to V and return TRUE if the resulting value is
+ * negative.
+ */
+static __inline__ int
+atomic_add_negative (int i, atomic_t *v)
+{
+	return atomic_add_return(i, v) < 0;
+}
+
+static __inline__ int
+atomic64_add_negative (__s64 i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+#define atomic_sub_return(i,v)						\
+({									\
+	int __ia64_asr_i = (i);						\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
+	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
+	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
+	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic_sub(__ia64_asr_i, v);			\
+})
+
+#define atomic64_sub_return(i,v)					\
+({									\
+	long __ia64_asr_i = (i);					\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
+	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
+	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
+	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic64_sub(__ia64_asr_i, v);			\
+})
+
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_sub_return(1, (v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_add_return(1, (v)) == 0)
+
+#define atomic_add(i,v)			atomic_add_return((i), (v))
+#define atomic_sub(i,v)			atomic_sub_return((i), (v))
+#define atomic_inc(v)			atomic_add(1, (v))
+#define atomic_dec(v)			atomic_sub(1, (v))
+
+#define atomic64_add(i,v)		atomic64_add_return((i), (v))
+#define atomic64_sub(i,v)		atomic64_sub_return((i), (v))
+#define atomic64_inc(v)			atomic64_add(1, (v))
+#define atomic64_dec(v)			atomic64_sub(1, (v))
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_IA64_ATOMIC_H */
diff --git a/arch/ia64/include/asm/auxvec.h b/arch/ia64/include/asm/auxvec.h
new file mode 100644
index 00000000000..23cebe5685b
--- /dev/null
+++ b/arch/ia64/include/asm/auxvec.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_IA64_AUXVEC_H
+#define _ASM_IA64_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values are in the range 0-17.  Leave some room for more of
+ * them, start the architecture-specific ones at 32.
+ */
+#define AT_SYSINFO	32
+#define AT_SYSINFO_EHDR	33
+
+#endif /* _ASM_IA64_AUXVEC_H */
diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h
new file mode 100644
index 00000000000..e2ca8003733
--- /dev/null
+++ b/arch/ia64/include/asm/bitops.h
@@ -0,0 +1,468 @@
+#ifndef _ASM_IA64_BITOPS_H
+#define _ASM_IA64_BITOPS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64
+ * O(1) scheduler patch
+ */
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/intrinsics.h>
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ *
+ * The address must be (at least) "long" aligned.
+ * Note that there are driver (e.g., eepro100) which use these operations to
+ * operate on hw-defined data-structures, so we can't easily change these
+ * operations to force a bigger alignment.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+static __inline__ void
+set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__set_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31));
+}
+
+/*
+ * clear_bit() has "acquire" semantics.
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	do { /* skip */; } while (0)
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void
+clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * clear_bit_unlock - Clears a bit in memory with release
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit_unlock() is atomic and may not be reordered.  It does
+ * contain a memory barrier suitable for unlock type operations.
+ */
+static __inline__ void
+clear_bit_unlock (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_rel(m, old, new) != old);
+}
+
+/**
+ * __clear_bit_unlock - Non-atomically clears a bit in memory with release
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * Similarly to clear_bit_unlock, the implementation uses a store
+ * with release semantics. See also __raw_spin_unlock().
+ */
+static __inline__ void
+__clear_bit_unlock(int nr, void *addr)
+{
+	__u32 * const m = (__u32 *) addr + (nr >> 5);
+	__u32 const new = *m & ~(1 << (nr & 31));
+
+	ia64_st4_rel_nta(m, new);
+}
+
+/**
+ * __clear_bit - Clears a bit in memory (non-atomic version)
+ * @nr: the bit to clear
+ * @addr: the address to start counting from
+ *
+ * Unlike clear_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__clear_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) &= ~(1 << (nr & 31));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to toggle
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void
+change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to toggle
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__change_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This is the same as test_and_set_bit on ia64
+ */
+#define test_and_set_bit_lock test_and_set_bit
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = (*p & m) != 0;
+
+	*p |= m;
+	return oldbitset;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & ~mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_clear_bit(int nr, volatile void * addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = *p & m;
+
+	*p &= ~m;
+	return oldbitset;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/**
+ * __test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ */
+static __inline__ int
+__test_and_change_bit (int nr, void *addr)
+{
+	__u32 old, bit = (1 << (nr & 31));
+	__u32 *m = (__u32 *) addr + (nr >> 5);
+
+	old = *m;
+	*m = old ^ bit;
+	return (old & bit) != 0;
+}
+
+static __inline__ int
+test_bit (int nr, const volatile void *addr)
+{
+	return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/**
+ * ffz - find the first zero bit in a long word
+ * @x: The long word to find the bit in
+ *
+ * Returns the bit-number (0..63) of the first (least significant) zero bit.
+ * Undefined if no zero exists, so code should check against ~0UL first...
+ */
+static inline unsigned long
+ffz (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt(x & (~x - 1));
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @x: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long
+__ffs (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt((x-1) & ~x);
+	return result;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * Return bit number of last (most-significant) bit set.  Undefined
+ * for x==0.  Bits are numbered from 0..63 (e.g., ia64_fls(9) == 3).
+ */
+static inline unsigned long
+ia64_fls (unsigned long x)
+{
+	long double d = x;
+	long exp;
+
+	exp = ia64_getf_exp(d);
+	return exp - 0xffff;
+}
+
+/*
+ * Find the last (most significant) bit set.  Returns 0 for x==0 and
+ * bits are numbered from 1..32 (e.g., fls(9) == 4).
+ */
+static inline int
+fls (int t)
+{
+	unsigned long x = t & 0xffffffffu;
+
+	if (!x)
+		return 0;
+	x |= x >> 1;
+	x |= x >> 2;
+	x |= x >> 4;
+	x |= x >> 8;
+	x |= x >> 16;
+	return ia64_popcnt(x);
+}
+
+/*
+ * Find the last (most significant) bit set.  Undefined for x==0.
+ * Bits are numbered from 0..63 (e.g., __fls(9) == 3).
+ */
+static inline unsigned long
+__fls (unsigned long x)
+{
+	x |= x >> 1;
+	x |= x >> 2;
+	x |= x >> 4;
+	x |= x >> 8;
+	x |= x >> 16;
+	x |= x >> 32;
+	return ia64_popcnt(x) - 1;
+}
+
+#include <asm-generic/bitops/fls64.h>
+
+/*
+ * ffs: find first bit set. This is defined the same way as the libc and
+ * compiler builtin ffs routines, therefore differs in spirit from the above
+ * ffz (man ffs): it operates on "int" values only and the result value is the
+ * bit number + 1.  ffs(0) is defined to return zero.
+ */
+#define ffs(x)	__builtin_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+static __inline__ unsigned long
+hweight64 (unsigned long x)
+{
+	unsigned long result;
+	result = ia64_popcnt(x);
+	return result;
+}
+
+#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
+#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
+#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(l,n,a)	test_and_set_bit(n,a)
+#define ext2_clear_bit_atomic(l,n,a)	test_and_clear_bit(n,a)
+
+#include <asm-generic/bitops/minix.h>
+#include <asm-generic/bitops/sched.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_BITOPS_H */
diff --git a/arch/ia64/include/asm/break.h b/arch/ia64/include/asm/break.h
new file mode 100644
index 00000000000..f0340203989
--- /dev/null
+++ b/arch/ia64/include/asm/break.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_IA64_BREAK_H
+#define _ASM_IA64_BREAK_H
+
+/*
+ * IA-64 Linux break numbers.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co
+ * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * OS-specific debug break numbers:
+ */
+#define __IA64_BREAK_KDB		0x80100
+#define __IA64_BREAK_KPROBE		0x81000 /* .. 0x81fff */
+#define __IA64_BREAK_JPROBE		0x82000
+
+/*
+ * OS-specific break numbers:
+ */
+#define __IA64_BREAK_SYSCALL		0x100000
+
+#endif /* _ASM_IA64_BREAK_H */
diff --git a/arch/ia64/include/asm/bug.h b/arch/ia64/include/asm/bug.h
new file mode 100644
index 00000000000..823616b5020
--- /dev/null
+++ b/arch/ia64/include/asm/bug.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_IA64_BUG_H
+#define _ASM_IA64_BUG_H
+
+#ifdef CONFIG_BUG
+#define ia64_abort()	__builtin_trap()
+#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0)
+
+/* should this BUG be made generic? */
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/ia64/include/asm/bugs.h b/arch/ia64/include/asm/bugs.h
new file mode 100644
index 00000000000..433523e3b2e
--- /dev/null
+++ b/arch/ia64/include/asm/bugs.h
@@ -0,0 +1,19 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ *
+ * Based on <asm-alpha/bugs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>,  Hewlett-Packard Co.
+ */
+#ifndef _ASM_IA64_BUGS_H
+#define _ASM_IA64_BUGS_H
+
+#include <asm/processor.h>
+
+extern void check_bugs (void);
+
+#endif /* _ASM_IA64_BUGS_H */
diff --git a/arch/ia64/include/asm/byteorder.h b/arch/ia64/include/asm/byteorder.h
new file mode 100644
index 00000000000..69bd41d7c26
--- /dev/null
+++ b/arch/ia64/include/asm/byteorder.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_BYTEORDER_H
+#define _ASM_IA64_BYTEORDER_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <asm/types.h>
+#include <asm/intrinsics.h>
+#include <linux/compiler.h>
+
+static __inline__ __attribute_const__ __u64
+__ia64_swab64 (__u64 x)
+{
+	__u64 result;
+
+	result = ia64_mux1(x, ia64_mux1_rev);
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32
+__ia64_swab32 (__u32 x)
+{
+	return __ia64_swab64(x) >> 32;
+}
+
+static __inline__ __attribute_const__ __u16
+__ia64_swab16(__u16 x)
+{
+	return __ia64_swab64(x) >> 48;
+}
+
+#define __arch__swab64(x) __ia64_swab64(x)
+#define __arch__swab32(x) __ia64_swab32(x)
+#define __arch__swab16(x) __ia64_swab16(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_IA64_BYTEORDER_H */
diff --git a/arch/ia64/include/asm/cache.h b/arch/ia64/include/asm/cache.h
new file mode 100644
index 00000000000..e7482bd628f
--- /dev/null
+++ b/arch/ia64/include/asm/cache.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_IA64_CACHE_H
+#define _ASM_IA64_CACHE_H
+
+
+/*
+ * Copyright (C) 1998-2000 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/* Bytes per L1 (data) cache line.  */
+#define L1_CACHE_SHIFT		CONFIG_IA64_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#ifdef CONFIG_SMP
+# define SMP_CACHE_SHIFT	L1_CACHE_SHIFT
+# define SMP_CACHE_BYTES	L1_CACHE_BYTES
+#else
+  /*
+   * The "aligned" directive can only _increase_ alignment, so this is
+   * safe and provides an easy way to avoid wasting space on a
+   * uni-processor:
+   */
+# define SMP_CACHE_SHIFT	3
+# define SMP_CACHE_BYTES	(1 << 3)
+#endif
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#endif /* _ASM_IA64_CACHE_H */
diff --git a/arch/ia64/include/asm/cacheflush.h b/arch/ia64/include/asm/cacheflush.h
new file mode 100644
index 00000000000..afcfbda76e2
--- /dev/null
+++ b/arch/ia64/include/asm/cacheflush.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_CACHEFLUSH_H
+#define _ASM_IA64_CACHEFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/page-flags.h>
+#include <linux/bitops.h>
+
+#include <asm/page.h>
+
+/*
+ * Cache flushing routines.  This is the kind of stuff that can be very expensive, so try
+ * to avoid them whenever possible.
+ */
+
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma,page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define flush_dcache_page(page)			\
+do {						\
+	clear_bit(PG_arch_1, &(page)->flags);	\
+} while (0)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void flush_icache_range (unsigned long start, unsigned long end);
+
+#define flush_icache_user_range(vma, page, user_addr, len)					\
+do {												\
+	unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK);	\
+	flush_icache_range(_addr, _addr + (len));						\
+} while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _ASM_IA64_CACHEFLUSH_H */
diff --git a/arch/ia64/include/asm/checksum.h b/arch/ia64/include/asm/checksum.h
new file mode 100644
index 00000000000..97af155057e
--- /dev/null
+++ b/arch/ia64/include/asm/checksum.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_IA64_CHECKSUM_H
+#define _ASM_IA64_CHECKSUM_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit
+ * checksum, already complemented
+ */
+extern __sum16 csum_tcpudp_magic (__be32 saddr, __be32 daddr,
+					     unsigned short len,
+					     unsigned short proto,
+					     __wsum sum);
+
+extern __wsum csum_tcpudp_nofold (__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum);
+
+/*
+ * Computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * Same as csum_partial, but copies from src while it checksums.
+ *
+ * Here it is even more important to align src and dst on a 32-bit (or
+ * even better 64-bit) boundary.
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+						 int len, __wsum sum,
+						 int *errp);
+
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					       int len, __wsum sum);
+
+/*
+ * This routine is used for miscellaneous IP-like checksums, mainly in
+ * icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+/*
+ * Fold a partial checksum without adding pseudo headers.
+ */
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return (__force __sum16)~sum;
+}
+
+#define _HAVE_ARCH_IPV6_CSUM	1
+struct in6_addr;
+extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+	const struct in6_addr *daddr, __u32 len, unsigned short proto,
+	__wsum csum);
+
+#endif /* _ASM_IA64_CHECKSUM_H */
diff --git a/arch/ia64/include/asm/compat.h b/arch/ia64/include/asm/compat.h
new file mode 100644
index 00000000000..dfcf75b8426
--- /dev/null
+++ b/arch/ia64/include/asm/compat.h
@@ -0,0 +1,207 @@
+#ifndef _ASM_IA64_COMPAT_H
+#define _ASM_IA64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_key_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64 __attribute__((aligned(4))) compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64 __attribute__((aligned(4))) compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/*
+ * IA32 uses 4 byte alignment for 64 bit quantities,
+ * so we need to pack this structure.
+ */
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+} __attribute__((packed));
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY       0x7fffffff
+#define COMPAT_RLIM_INFINITY           0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+/*
+ * A pointer passed in from user mode. This should not be used for syscall parameters,
+ * just declare them as pointers because the syscall entry code will have appropriately
+ * converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *
+compat_ptr (compat_uptr_t uptr)
+{
+	return (void __user *) (unsigned long) uptr;
+}
+
+static inline compat_uptr_t
+ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static __inline__ void __user *
+compat_alloc_user_space (long len)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);
+}
+
+#endif /* _ASM_IA64_COMPAT_H */
diff --git a/arch/ia64/include/asm/cpu.h b/arch/ia64/include/asm/cpu.h
new file mode 100644
index 00000000000..fcca30b9f11
--- /dev/null
+++ b/arch/ia64/include/asm/cpu.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_CPU_H_
+#define _ASM_IA64_CPU_H_
+
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/topology.h>
+#include <linux/percpu.h>
+
+struct ia64_cpu {
+	struct cpu cpu;
+};
+
+DECLARE_PER_CPU(struct ia64_cpu, cpu_devices);
+
+DECLARE_PER_CPU(int, cpu_state);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int arch_register_cpu(int num);
+extern void arch_unregister_cpu(int);
+#endif
+
+#endif /* _ASM_IA64_CPU_H_ */
diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h
new file mode 100644
index 00000000000..d20b998cb91
--- /dev/null
+++ b/arch/ia64/include/asm/cputime.h
@@ -0,0 +1,109 @@
+/*
+ * Definitions for measuring cputime on ia64 machines.
+ *
+ * Based on <asm-powerpc/cputime.h>.
+ *
+ * Copyright (C) 2007 FUJITSU LIMITED
+ * Copyright (C) 2007 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec.
+ * Otherwise we measure cpu time in jiffies using the generic definitions.
+ */
+
+#ifndef __IA64_CPUTIME_H
+#define __IA64_CPUTIME_H
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#include <asm-generic/cputime.h>
+#else
+
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <asm/processor.h>
+
+typedef u64 cputime_t;
+typedef u64 cputime64_t;
+
+#define cputime_zero			((cputime_t)0)
+#define cputime_max			((~((cputime_t)0) >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n)		((__a) /  (__n))
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+
+#define cputime64_zero			((cputime64_t)0)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime64_sub(__a, __b)		((__a) - (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+/*
+ * Convert cputime <-> jiffies (HZ)
+ */
+#define cputime_to_jiffies(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies_to_cputime(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime64_to_jiffies64(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies64_to_cputime64(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
+
+/*
+ * Convert cputime <-> milliseconds
+ */
+#define cputime_to_msecs(__ct)		((__ct) / NSEC_PER_MSEC)
+#define msecs_to_cputime(__msecs)	((__msecs) * NSEC_PER_MSEC)
+
+/*
+ * Convert cputime <-> seconds
+ */
+#define cputime_to_secs(__ct)		((__ct) / NSEC_PER_SEC)
+#define secs_to_cputime(__secs)		((__secs) * NSEC_PER_SEC)
+
+/*
+ * Convert cputime <-> timespec (nsec)
+ */
+static inline cputime_t timespec_to_cputime(const struct timespec *val)
+{
+	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
+	return (ret + val->tv_nsec);
+}
+static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
+{
+	val->tv_sec  = ct / NSEC_PER_SEC;
+	val->tv_nsec = ct % NSEC_PER_SEC;
+}
+
+/*
+ * Convert cputime <-> timeval (msec)
+ */
+static inline cputime_t timeval_to_cputime(struct timeval *val)
+{
+	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
+	return (ret + val->tv_usec * NSEC_PER_USEC);
+}
+static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
+{
+	val->tv_sec = ct / NSEC_PER_SEC;
+	val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+}
+
+/*
+ * Convert cputime <-> clock (USER_HZ)
+ */
+#define cputime_to_clock_t(__ct)	((__ct) / (NSEC_PER_SEC / USER_HZ))
+#define clock_t_to_cputime(__x)		((__x) * (NSEC_PER_SEC / USER_HZ))
+
+/*
+ * Convert cputime64 to clock.
+ */
+#define cputime64_to_clock_t(__ct)      cputime_to_clock_t((cputime_t)__ct)
+
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* __IA64_CPUTIME_H */
diff --git a/arch/ia64/include/asm/current.h b/arch/ia64/include/asm/current.h
new file mode 100644
index 00000000000..c659f90fbfd
--- /dev/null
+++ b/arch/ia64/include/asm/current.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_IA64_CURRENT_H
+#define _ASM_IA64_CURRENT_H
+
+/*
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/intrinsics.h>
+
+/*
+ * In kernel mode, thread pointer (r13) is used to point to the current task
+ * structure.
+ */
+#define current	((struct task_struct *) ia64_getreg(_IA64_REG_TP))
+
+#endif /* _ASM_IA64_CURRENT_H */
diff --git a/arch/ia64/include/asm/cyclone.h b/arch/ia64/include/asm/cyclone.h
new file mode 100644
index 00000000000..88f6500e84a
--- /dev/null
+++ b/arch/ia64/include/asm/cyclone.h
@@ -0,0 +1,15 @@
+#ifndef ASM_IA64_CYCLONE_H
+#define ASM_IA64_CYCLONE_H
+
+#ifdef	CONFIG_IA64_CYCLONE
+extern int use_cyclone;
+extern void __init cyclone_setup(void);
+#else	/* CONFIG_IA64_CYCLONE */
+#define use_cyclone 0
+static inline void cyclone_setup(void)
+{
+	printk(KERN_ERR "Cyclone Counter: System not configured"
+					" w/ CONFIG_IA64_CYCLONE.\n");
+}
+#endif	/* CONFIG_IA64_CYCLONE */
+#endif	/* !ASM_IA64_CYCLONE_H */
diff --git a/arch/ia64/include/asm/delay.h b/arch/ia64/include/asm/delay.h
new file mode 100644
index 00000000000..a30a62f235e
--- /dev/null
+++ b/arch/ia64/include/asm/delay.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_IA64_DELAY_H
+#define _ASM_IA64_DELAY_H
+
+/*
+ * Delay routines using a pre-computed "cycles/usec" value.
+ *
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/compiler.h>
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+static __inline__ void
+ia64_set_itm (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_ITM, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itm (void)
+{
+	unsigned long result;
+
+	result = ia64_getreg(_IA64_REG_CR_ITM);
+	ia64_srlz_d();
+	return result;
+}
+
+static __inline__ void
+ia64_set_itv (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_ITV, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itv (void)
+{
+	return ia64_getreg(_IA64_REG_CR_ITV);
+}
+
+static __inline__ void
+ia64_set_itc (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_AR_ITC, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itc (void)
+{
+	unsigned long result;
+
+	result = ia64_getreg(_IA64_REG_AR_ITC);
+	ia64_barrier();
+#ifdef CONFIG_ITANIUM
+	while (unlikely((__s32) result == -1)) {
+		result = ia64_getreg(_IA64_REG_AR_ITC);
+		ia64_barrier();
+	}
+#endif
+	return result;
+}
+
+extern void ia64_delay_loop (unsigned long loops);
+
+static __inline__ void
+__delay (unsigned long loops)
+{
+	if (unlikely(loops < 1))
+		return;
+
+	ia64_delay_loop (loops - 1);
+}
+
+extern void udelay (unsigned long usecs);
+
+#endif /* _ASM_IA64_DELAY_H */
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
new file mode 100644
index 00000000000..3db6daf7f25
--- /dev/null
+++ b/arch/ia64/include/asm/device.h
@@ -0,0 +1,15 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_IA64_DEVICE_H
+#define _ASM_IA64_DEVICE_H
+
+struct dev_archdata {
+#ifdef CONFIG_ACPI
+	void	*acpi_handle;
+#endif
+};
+
+#endif /* _ASM_IA64_DEVICE_H */
diff --git a/arch/ia64/include/asm/div64.h b/arch/ia64/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/ia64/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..9f0df9bd46b
--- /dev/null
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -0,0 +1,97 @@
+#ifndef _ASM_IA64_DMA_MAPPING_H
+#define _ASM_IA64_DMA_MAPPING_H
+
+/*
+ * Copyright (C) 2003-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <asm/machvec.h>
+#include <linux/scatterlist.h>
+
+#define dma_alloc_coherent	platform_dma_alloc_coherent
+/* coherent mem. is cheap */
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		      gfp_t flag)
+{
+	return dma_alloc_coherent(dev, size, dma_handle, flag);
+}
+#define dma_free_coherent	platform_dma_free_coherent
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+		     dma_addr_t dma_handle)
+{
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
+}
+#define dma_map_single_attrs	platform_dma_map_single_attrs
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size, int dir)
+{
+	return dma_map_single_attrs(dev, cpu_addr, size, dir, NULL);
+}
+#define dma_map_sg_attrs	platform_dma_map_sg_attrs
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sgl,
+			     int nents, int dir)
+{
+	return dma_map_sg_attrs(dev, sgl, nents, dir, NULL);
+}
+#define dma_unmap_single_attrs	platform_dma_unmap_single_attrs
+static inline void dma_unmap_single(struct device *dev, dma_addr_t cpu_addr,
+				    size_t size, int dir)
+{
+	return dma_unmap_single_attrs(dev, cpu_addr, size, dir, NULL);
+}
+#define dma_unmap_sg_attrs	platform_dma_unmap_sg_attrs
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sgl,
+				int nents, int dir)
+{
+	return dma_unmap_sg_attrs(dev, sgl, nents, dir, NULL);
+}
+#define dma_sync_single_for_cpu	platform_dma_sync_single_for_cpu
+#define dma_sync_sg_for_cpu	platform_dma_sync_sg_for_cpu
+#define dma_sync_single_for_device platform_dma_sync_single_for_device
+#define dma_sync_sg_for_device	platform_dma_sync_sg_for_device
+#define dma_mapping_error	platform_dma_mapping_error
+
+#define dma_map_page(dev, pg, off, size, dir)				\
+	dma_map_single(dev, page_address(pg) + (off), (size), (dir))
+#define dma_unmap_page(dev, dma_addr, size, dir)			\
+	dma_unmap_single(dev, dma_addr, size, dir)
+
+/*
+ * Rest of this file is part of the "Advanced DMA API".  Use at your own risk.
+ * See Documentation/DMA-API.txt for details.
+ */
+
+#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir)	\
+	dma_sync_single_for_cpu(dev, dma_handle, size, dir)
+#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir)	\
+	dma_sync_single_for_device(dev, dma_handle, size, dir)
+
+#define dma_supported		platform_dma_supported
+
+static inline int
+dma_set_mask (struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+	*dev->dma_mask = mask;
+	return 0;
+}
+
+extern int dma_get_cache_alignment(void);
+
+static inline void
+dma_cache_sync (struct device *dev, void *vaddr, size_t size,
+	enum dma_data_direction dir)
+{
+	/*
+	 * IA-64 is cache-coherent, so this is mostly a no-op.  However, we do need to
+	 * ensure that dma_cache_sync() enforces order, hence the mb().
+	 */
+	mb();
+}
+
+#define dma_is_consistent(d, h)	(1)	/* all we do is coherent memory... */
+
+#endif /* _ASM_IA64_DMA_MAPPING_H */
diff --git a/arch/ia64/include/asm/dma.h b/arch/ia64/include/asm/dma.h
new file mode 100644
index 00000000000..4d97f60f1ef
--- /dev/null
+++ b/arch/ia64/include/asm/dma.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_IA64_DMA_H
+#define _ASM_IA64_DMA_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <asm/io.h>		/* need byte IO */
+
+extern unsigned long MAX_DMA_ADDRESS;
+
+#ifdef CONFIG_PCI
+  extern int isa_dma_bridge_buggy;
+#else
+# define isa_dma_bridge_buggy 	(0)
+#endif
+
+#define free_dma(x)
+
+void dma_mark_clean(void *addr, size_t size);
+
+#endif /* _ASM_IA64_DMA_H */
diff --git a/arch/ia64/include/asm/dmi.h b/arch/ia64/include/asm/dmi.h
new file mode 100644
index 00000000000..00eb1b130b6
--- /dev/null
+++ b/arch/ia64/include/asm/dmi.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_DMI_H
+#define _ASM_DMI_H 1
+
+#include <asm/io.h>
+
+/* Use normal IO mappings for DMI */
+#define dmi_ioremap ioremap
+#define dmi_iounmap(x,l) iounmap(x)
+#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
+
+#endif
diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h
new file mode 100644
index 00000000000..2acb6b6543c
--- /dev/null
+++ b/arch/ia64/include/asm/elf.h
@@ -0,0 +1,284 @@
+#ifndef _ASM_IA64_ELF_H
+#define _ASM_IA64_ELF_H
+
+/*
+ * ELF-specific definitions.
+ *
+ * Copyright (C) 1998-1999, 2002-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+#include <asm/auxvec.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_IA_64)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_IA_64
+
+#define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
+
+/* Least-significant four bits of ELF header's e_flags are OS-specific.  The bits are
+   interpreted as follows by Linux: */
+#define EF_IA_64_LINUX_EXECUTABLE_STACK	0x1	/* is stack (& heap) executable by default? */
+
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.
+ * Typical use of this is to invoke "./ld.so someprog" to test out a
+ * new version of the loader.  We need to make sure that it is out of
+ * the way of the program that it will "exec", and that there is
+ * sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x800000000UL)
+
+#define PT_IA_64_UNWIND		0x70000001
+
+/* IA-64 relocations: */
+#define R_IA64_NONE		0x00	/* none */
+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
+#define R_IA64_GPREL22		0x2a	/* @gprel(sym+add), add imm22 */
+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym+add), mov imm64 */
+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym+add), data4 MSB */
+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym+add), data4 LSB */
+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym+add), data8 MSB */
+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym+add), add imm22 */
+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym+add), add imm22 */
+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym+add), data8 MSB */
+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym+add), data8 LSB */
+#define R_IA64_FPTR64I		0x43	/* @fptr(sym+add), mov imm64 */
+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym+add), data4 MSB */
+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym+add), data4 LSB */
+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym+add), data8 MSB */
+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym+add), data8 LSB */
+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym+add), brl */
+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym+add), chk.s */
+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym+add), fchkf */
+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym+add), data4 MSB */
+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym+add), data4 LSB */
+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym+add), data8 MSB */
+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), 4 MSB */
+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), 4 LSB */
+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), 8 MSB */
+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), 8 LSB */
+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym+add), data4 MSB */
+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym+add), data4 LSB */
+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym+add), data8 MSB */
+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym+add), data8 LSB */
+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym+add), data4 MSB */
+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym+add), data4 LSB */
+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym+add), data8 MSB */
+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym+add), data8 LSB */
+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym+add), imm22 */
+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym+add), imm64 */
+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
+#define R_IA64_COPY		0x84	/* dynamic reloc, data copy */
+#define R_IA64_SUB		0x85	/* -symbol + addend, add imm22 */
+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
+#define R_IA64_TPREL14		0x91	/* @tprel(sym+add), add imm14 */
+#define R_IA64_TPREL22		0x92	/* @tprel(sym+add), add imm22 */
+#define R_IA64_TPREL64I		0x93	/* @tprel(sym+add), add imm64 */
+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym+add), data8 MSB */
+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), add imm22 */
+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym+add), data8 MSB */
+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(s+a)), imm22 */
+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym+add), imm14 */
+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym+add), imm22 */
+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym+add), imm64 */
+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym+add), data4 MSB */
+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym+add), data4 LSB */
+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym+add), data8 MSB */
+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
+
+/* IA-64 specific section flags: */
+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
+
+/*
+ * We use (abuse?) this macro to insert the (empty) vm_area that is
+ * used to map the register backing store.  I don't see any better
+ * place to do this, but we should discuss this with Linus once we can
+ * talk to him...
+ */
+extern void ia64_init_addr_space (void);
+#define ELF_PLAT_INIT(_r, load_addr)	ia64_init_addr_space()
+
+/* ELF register definitions.  This is needed for core dump support.  */
+
+/*
+ * elf_gregset_t contains the application-level state in the following order:
+ *	r0-r31
+ *	NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
+ *	predicate registers (p0-p63)
+ *	b0-b7
+ *	ip cfm psr
+ *	ar.rsc ar.bsp ar.bspstore ar.rnat
+ *	ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+ */
+#define ELF_NGREG	128	/* we really need just 72 but let's leave some headroom... */
+#define ELF_NFPREG	128	/* f0 and f1 could be omitted, but so what... */
+
+/* elf_gregset_t register offsets */
+#define ELF_GR_0_OFFSET     0
+#define ELF_NAT_OFFSET     (32 * sizeof(elf_greg_t))
+#define ELF_PR_OFFSET      (33 * sizeof(elf_greg_t))
+#define ELF_BR_0_OFFSET    (34 * sizeof(elf_greg_t))
+#define ELF_CR_IIP_OFFSET  (42 * sizeof(elf_greg_t))
+#define ELF_CFM_OFFSET     (43 * sizeof(elf_greg_t))
+#define ELF_CR_IPSR_OFFSET (44 * sizeof(elf_greg_t))
+#define ELF_GR_OFFSET(i)   (ELF_GR_0_OFFSET + i * sizeof(elf_greg_t))
+#define ELF_BR_OFFSET(i)   (ELF_BR_0_OFFSET + i * sizeof(elf_greg_t))
+#define ELF_AR_RSC_OFFSET  (45 * sizeof(elf_greg_t))
+#define ELF_AR_BSP_OFFSET  (46 * sizeof(elf_greg_t))
+#define ELF_AR_BSPSTORE_OFFSET (47 * sizeof(elf_greg_t))
+#define ELF_AR_RNAT_OFFSET (48 * sizeof(elf_greg_t))
+#define ELF_AR_CCV_OFFSET  (49 * sizeof(elf_greg_t))
+#define ELF_AR_UNAT_OFFSET (50 * sizeof(elf_greg_t))
+#define ELF_AR_FPSR_OFFSET (51 * sizeof(elf_greg_t))
+#define ELF_AR_PFS_OFFSET  (52 * sizeof(elf_greg_t))
+#define ELF_AR_LC_OFFSET   (53 * sizeof(elf_greg_t))
+#define ELF_AR_EC_OFFSET   (54 * sizeof(elf_greg_t))
+#define ELF_AR_CSD_OFFSET  (55 * sizeof(elf_greg_t))
+#define ELF_AR_SSD_OFFSET  (56 * sizeof(elf_greg_t))
+#define ELF_AR_END_OFFSET  (57 * sizeof(elf_greg_t))
+
+typedef unsigned long elf_fpxregset_t;
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct ia64_fpreg elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+
+
+struct pt_regs;	/* forward declaration... */
+extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
+#define ELF_CORE_COPY_REGS(_dest,_regs)	ia64_elf_core_copy_regs(_regs, _dest);
+
+/* This macro yields a bitmask that programs can use to figure out
+   what instruction set this CPU supports.  */
+#define ELF_HWCAP 	0
+
+/* This macro yields a string that ld.so will use to load
+   implementation specific libraries for optimization.  Not terribly
+   relevant until we have real hardware to play with... */
+#define ELF_PLATFORM	NULL
+
+#define SET_PERSONALITY(ex, ibcs2)	set_personality(PER_LINUX)
+#define elf_read_implies_exec(ex, executable_stack)					\
+	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
+
+struct task_struct;
+
+#define GATE_EHDR	((const struct elfhdr *) GATE_ADDR)
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO								\
+do {										\
+	extern char __kernel_syscall_via_epc[];					\
+	NEW_AUX_ENT(AT_SYSINFO, (unsigned long) __kernel_syscall_via_epc);	\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR);		\
+} while (0)
+
+
+/*
+ * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the gate DSO contents.  Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the gate DSO was being used.
+ */
+#define ELF_CORE_EXTRA_PHDRS		(GATE_EHDR->e_phnum)
+#define ELF_CORE_WRITE_EXTRA_PHDRS						\
+do {										\
+	const struct elf_phdr *const gate_phdrs =			      \
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
+	int i;									\
+	Elf64_Off ofs = 0;						      \
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {				\
+		struct elf_phdr phdr = gate_phdrs[i];			      \
+		if (phdr.p_type == PT_LOAD) {					\
+			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);	      \
+			phdr.p_filesz = phdr.p_memsz;			      \
+			if (ofs == 0) {					      \
+				ofs = phdr.p_offset = offset;		      \
+			offset += phdr.p_filesz;				\
+		}							      \
+		else							      \
+				phdr.p_offset = ofs;			      \
+		}							      \
+		else							      \
+			phdr.p_offset += ofs;					\
+		phdr.p_paddr = 0; /* match other core phdrs */			\
+		DUMP_WRITE(&phdr, sizeof(phdr));				\
+	}									\
+} while (0)
+#define ELF_CORE_WRITE_EXTRA_DATA					\
+do {									\
+	const struct elf_phdr *const gate_phdrs =			      \
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
+	int i;								\
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {			\
+		if (gate_phdrs[i].p_type == PT_LOAD) {			      \
+			DUMP_WRITE((void *) gate_phdrs[i].p_vaddr,	      \
+				   PAGE_ALIGN(gate_phdrs[i].p_memsz));	      \
+			break;						      \
+		}							      \
+	}								\
+} while (0)
+
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+	uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+	uint64_t ip;
+	uint64_t gp;
+};
+
+#endif /* _ASM_IA64_ELF_H */
diff --git a/arch/ia64/include/asm/emergency-restart.h b/arch/ia64/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/ia64/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/ia64/include/asm/errno.h b/arch/ia64/include/asm/errno.h
new file mode 100644
index 00000000000..4c82b503d92
--- /dev/null
+++ b/arch/ia64/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/ia64/include/asm/esi.h b/arch/ia64/include/asm/esi.h
new file mode 100644
index 00000000000..40991c6ba64
--- /dev/null
+++ b/arch/ia64/include/asm/esi.h
@@ -0,0 +1,29 @@
+/*
+ * ESI service calls.
+ *
+ * Copyright (c) Copyright 2005-2006 Hewlett-Packard Development Company, L.P.
+ * 	Alex Williamson <alex.williamson@hp.com>
+ */
+#ifndef esi_h
+#define esi_h
+
+#include <linux/efi.h>
+
+#define ESI_QUERY			0x00000001
+#define ESI_OPEN_HANDLE			0x02000000
+#define ESI_CLOSE_HANDLE		0x02000001
+
+enum esi_proc_type {
+	ESI_PROC_SERIALIZED,	/* calls need to be serialized */
+	ESI_PROC_MP_SAFE,	/* MP-safe, but not reentrant */
+	ESI_PROC_REENTRANT	/* MP-safe and reentrant */
+};
+
+extern struct ia64_sal_retval esi_call_phys (void *, u64 *);
+extern int ia64_esi_call(efi_guid_t, struct ia64_sal_retval *,
+			 enum esi_proc_type,
+			 u64, u64, u64, u64, u64, u64, u64, u64);
+extern int ia64_esi_call_phys(efi_guid_t, struct ia64_sal_retval *, u64, u64,
+                              u64, u64, u64, u64, u64, u64);
+
+#endif /* esi_h */
diff --git a/arch/ia64/include/asm/fb.h b/arch/ia64/include/asm/fb.h
new file mode 100644
index 00000000000..89a397cee90
--- /dev/null
+++ b/arch/ia64/include/asm/fb.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <linux/efi.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/ia64/include/asm/fcntl.h b/arch/ia64/include/asm/fcntl.h
new file mode 100644
index 00000000000..1dd275dc8f6
--- /dev/null
+++ b/arch/ia64/include/asm/fcntl.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_IA64_FCNTL_H
+#define _ASM_IA64_FCNTL_H
+/*
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#define force_o_largefile()	\
+		(personality(current->personality) != PER_LINUX32)
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_IA64_FCNTL_H */
diff --git a/arch/ia64/include/asm/fpswa.h b/arch/ia64/include/asm/fpswa.h
new file mode 100644
index 00000000000..62edfceadaa
--- /dev/null
+++ b/arch/ia64/include/asm/fpswa.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_IA64_FPSWA_H
+#define _ASM_IA64_FPSWA_H
+
+/*
+ * Floating-point Software Assist
+ *
+ * Copyright (C) 1999 Intel Corporation.
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Goutham Rao <goutham.rao@intel.com>
+ */
+
+typedef struct {
+	/* 4 * 128 bits */
+	unsigned long fp_lp[4*2];
+} fp_state_low_preserved_t;
+
+typedef struct {
+	/* 10 * 128 bits */
+	unsigned long fp_lv[10 * 2];
+} fp_state_low_volatile_t;
+
+typedef	struct {
+	/* 16 * 128 bits */
+	unsigned long fp_hp[16 * 2];
+} fp_state_high_preserved_t;
+
+typedef struct {
+	/* 96 * 128 bits */
+	unsigned long fp_hv[96 * 2];
+} fp_state_high_volatile_t;
+
+/**
+ * floating point state to be passed to the FP emulation library by
+ * the trap/fault handler
+ */
+typedef struct {
+	unsigned long			bitmask_low64;
+	unsigned long			bitmask_high64;
+	fp_state_low_preserved_t	*fp_state_low_preserved;
+	fp_state_low_volatile_t		*fp_state_low_volatile;
+	fp_state_high_preserved_t	*fp_state_high_preserved;
+	fp_state_high_volatile_t	*fp_state_high_volatile;
+} fp_state_t;
+
+typedef struct {
+	unsigned long status;
+	unsigned long err0;
+	unsigned long err1;
+	unsigned long err2;
+} fpswa_ret_t;
+
+/**
+ * function header for the Floating Point software assist
+ * library. This function is invoked by the Floating point software
+ * assist trap/fault handler.
+ */
+typedef fpswa_ret_t (*efi_fpswa_t) (unsigned long trap_type, void *bundle, unsigned long *ipsr,
+				    unsigned long *fsr, unsigned long *isr, unsigned long *preds,
+				    unsigned long *ifs, fp_state_t *fp_state);
+
+/**
+ * This is the FPSWA library interface as defined by EFI.  We need to pass a 
+ * pointer to the interface itself on a call to the assist library
+ */
+typedef struct {
+	unsigned int	 revision;
+	unsigned int	 reserved;
+	efi_fpswa_t	 fpswa;
+} fpswa_interface_t;
+
+extern fpswa_interface_t *fpswa_interface;
+
+#endif /* _ASM_IA64_FPSWA_H */
diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h
new file mode 100644
index 00000000000..3859558ff0a
--- /dev/null
+++ b/arch/ia64/include/asm/fpu.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_FPU_H
+#define _ASM_IA64_FPU_H
+
+/*
+ * Copyright (C) 1998, 1999, 2002, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/types.h>
+
+/* floating point status register: */
+#define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
+#define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */
+#define FPSR_TRAP_ZD	(1 << 2)	/* zero-divide trap disabled */
+#define FPSR_TRAP_OD	(1 << 3)	/* overflow trap disabled */
+#define FPSR_TRAP_UD	(1 << 4)	/* underflow trap disabled */
+#define FPSR_TRAP_ID	(1 << 5)	/* inexact trap disabled */
+#define FPSR_S0(x)	((x) <<  6)
+#define FPSR_S1(x)	((x) << 19)
+#define FPSR_S2(x)	(__IA64_UL(x) << 32)
+#define FPSR_S3(x)	(__IA64_UL(x) << 45)
+
+/* floating-point status field controls: */
+#define FPSF_FTZ	(1 << 0)		/* flush-to-zero */
+#define FPSF_WRE	(1 << 1)		/* widest-range exponent */
+#define FPSF_PC(x)	(((x) & 0x3) << 2)	/* precision control */
+#define FPSF_RC(x)	(((x) & 0x3) << 4)	/* rounding control */
+#define FPSF_TD		(1 << 6)		/* trap disabled */
+
+/* floating-point status field flags: */
+#define FPSF_V		(1 <<  7)		/* invalid operation flag */
+#define FPSF_D		(1 <<  8)		/* denormal/unnormal operand flag */
+#define FPSF_Z		(1 <<  9)		/* zero divide (IEEE) flag */
+#define FPSF_O		(1 << 10)		/* overflow (IEEE) flag */
+#define FPSF_U		(1 << 11)		/* underflow (IEEE) flag */
+#define FPSF_I		(1 << 12)		/* inexact (IEEE) flag) */
+
+/* floating-point rounding control: */
+#define FPRC_NEAREST	0x0
+#define FPRC_NEGINF	0x1
+#define FPRC_POSINF	0x2
+#define FPRC_TRUNC	0x3
+
+#define FPSF_DEFAULT	(FPSF_PC (0x3) | FPSF_RC (FPRC_NEAREST))
+
+/* This default value is the same as HP-UX uses.  Don't change it
+   without a very good reason.  */
+#define FPSR_DEFAULT	(FPSR_TRAP_VD | FPSR_TRAP_DD | FPSR_TRAP_ZD	\
+			 | FPSR_TRAP_OD | FPSR_TRAP_UD | FPSR_TRAP_ID	\
+			 | FPSR_S0 (FPSF_DEFAULT)			\
+			 | FPSR_S1 (FPSF_DEFAULT | FPSF_TD | FPSF_WRE)	\
+			 | FPSR_S2 (FPSF_DEFAULT | FPSF_TD)		\
+			 | FPSR_S3 (FPSF_DEFAULT | FPSF_TD))
+
+# ifndef __ASSEMBLY__
+
+struct ia64_fpreg {
+	union {
+		unsigned long bits[2];
+		long double __dummy;	/* force 16-byte alignment */
+	} u;
+};
+
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_FPU_H */
diff --git a/arch/ia64/include/asm/futex.h b/arch/ia64/include/asm/futex.h
new file mode 100644
index 00000000000..c7f0f062239
--- /dev/null
+++ b/arch/ia64/include/asm/futex.h
@@ -0,0 +1,124 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+
+#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \
+do {									\
+	register unsigned long r8 __asm ("r8") = 0;			\
+	__asm__ __volatile__(						\
+		"	mf;;					\n"	\
+		"[1:] "	insn ";;				\n"	\
+		"	.xdata4 \"__ex_table\", 1b-., 2f-.	\n"	\
+		"[2:]"							\
+		: "+r" (r8), "=r" (oldval)				\
+		: "r" (uaddr), "r" (oparg)				\
+		: "memory");						\
+	ret = r8;							\
+} while (0)
+
+#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \
+do {									\
+	register unsigned long r8 __asm ("r8") = 0;			\
+	int val, newval;						\
+	do {								\
+		__asm__ __volatile__(					\
+			"	mf;;				  \n"	\
+			"[1:]	ld4 %3=[%4];;			  \n"	\
+			"	mov %2=%3			  \n"	\
+				insn	";;			  \n"	\
+			"	mov ar.ccv=%2;;			  \n"	\
+			"[2:]	cmpxchg4.acq %1=[%4],%3,ar.ccv;;  \n"	\
+			"	.xdata4 \"__ex_table\", 1b-., 3f-.\n"	\
+			"	.xdata4 \"__ex_table\", 2b-., 3f-.\n"	\
+			"[3:]"						\
+			: "+r" (r8), "=r" (val), "=&r" (oldval),	\
+			   "=&r" (newval)				\
+			: "r" (uaddr), "r" (oparg)			\
+			: "memory");					\
+		if (unlikely (r8))					\
+			break;						\
+	} while (unlikely (val != oldval));				\
+	ret = r8;							\
+} while (0)
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op1("xchg4 %1=[%2],%3", ret, oldval, uaddr,
+				   oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op2("add %3=%3,%5", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op2("or %3=%3,%5", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op2("and %3=%3,%5", ret, oldval, uaddr,
+				   ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op2("xor %3=%3,%5", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	{
+		register unsigned long r8 __asm ("r8");
+		__asm__ __volatile__(
+			"	mf;;					\n"
+			"	mov ar.ccv=%3;;				\n"
+			"[1:]	cmpxchg4.acq %0=[%1],%2,ar.ccv		\n"
+			"	.xdata4 \"__ex_table\", 1b-., 2f-.	\n"
+			"[2:]"
+			: "=r" (r8)
+			: "r" (uaddr), "r" (newval),
+			  "rO" ((long) (unsigned) oldval)
+			: "memory");
+		return r8;
+	}
+}
+
+#endif /* _ASM_FUTEX_H */
diff --git a/arch/ia64/include/asm/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h
new file mode 100644
index 00000000000..0f5b5592175
--- /dev/null
+++ b/arch/ia64/include/asm/gcc_intrin.h
@@ -0,0 +1,620 @@
+#ifndef _ASM_IA64_GCC_INTRIN_H
+#define _ASM_IA64_GCC_INTRIN_H
+/*
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#include <linux/compiler.h>
+
+/* define this macro to get some asm stmts included in 'c' files */
+#define ASM_SUPPORTED
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define ia64_barrier()	asm volatile ("":::"memory")
+
+#define ia64_stop()	asm volatile (";;"::)
+
+#define ia64_invala_gr(regnum)	asm volatile ("invala.e r%0" :: "i"(regnum))
+
+#define ia64_invala_fr(regnum)	asm volatile ("invala.e f%0" :: "i"(regnum))
+
+#define ia64_flushrs() asm volatile ("flushrs;;":::"memory")
+
+#define ia64_loadrs() asm volatile ("loadrs;;":::"memory")
+
+extern void ia64_bad_param_for_setreg (void);
+extern void ia64_bad_param_for_getreg (void);
+
+#ifdef __KERNEL__
+register unsigned long ia64_r13 asm ("r13") __used;
+#endif
+
+#define ia64_native_setreg(regnum, val)						\
+({										\
+	switch (regnum) {							\
+	    case _IA64_REG_PSR_L:						\
+		    asm volatile ("mov psr.l=%0" :: "r"(val) : "memory");	\
+		    break;							\
+	    case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		    asm volatile ("mov ar%0=%1" ::				\
+		    			  "i" (regnum - _IA64_REG_AR_KR0),	\
+					  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:			\
+		    asm volatile ("mov cr%0=%1" ::				\
+				          "i" (regnum - _IA64_REG_CR_DCR),	\
+					  "r"(val): "memory" );			\
+		    break;							\
+	    case _IA64_REG_SP:							\
+		    asm volatile ("mov r12=%0" ::				\
+			    		  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_GP:							\
+		    asm volatile ("mov gp=%0" :: "r"(val) : "memory");		\
+		break;								\
+	    default:								\
+		    ia64_bad_param_for_setreg();				\
+		    break;							\
+	}									\
+})
+
+#define ia64_native_getreg(regnum)						\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (regnum) {							\
+	case _IA64_REG_GP:							\
+		asm volatile ("mov %0=gp" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_IP:							\
+		asm volatile ("mov %0=ip" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_PSR:							\
+		asm volatile ("mov %0=psr" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_TP:	/* for current() */				\
+		ia64_intri_res = ia64_r13;					\
+		break;								\
+	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res)		\
+				      : "i"(regnum - _IA64_REG_AR_KR0));	\
+		break;								\
+	case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:				\
+		asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res)		\
+				      : "i" (regnum - _IA64_REG_CR_DCR));	\
+		break;								\
+	case _IA64_REG_SP:							\
+		asm volatile ("mov %0=sp" : "=r" (ia64_intri_res));		\
+		break;								\
+	default:								\
+		ia64_bad_param_for_getreg();					\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#define ia64_hint_pause 0
+
+#define ia64_hint(mode)						\
+({								\
+	switch (mode) {						\
+	case ia64_hint_pause:					\
+		asm volatile ("hint @pause" ::: "memory");	\
+		break;						\
+	}							\
+})
+
+
+/* Integer values for mux1 instruction */
+#define ia64_mux1_brcst 0
+#define ia64_mux1_mix   8
+#define ia64_mux1_shuf  9
+#define ia64_mux1_alt  10
+#define ia64_mux1_rev  11
+
+#define ia64_mux1(x, mode)							\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (mode) {								\
+	case ia64_mux1_brcst:							\
+		asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_mix:							\
+		asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_shuf:							\
+		asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_alt:							\
+		asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_rev:							\
+		asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#if __GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
+# define ia64_popcnt(x)		__builtin_popcountl(x)
+#else
+# define ia64_popcnt(x)						\
+  ({								\
+	__u64 ia64_intri_res;					\
+	asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x));	\
+								\
+	ia64_intri_res;						\
+  })
+#endif
+
+#define ia64_getf_exp(x)					\
+({								\
+	long ia64_intri_res;					\
+								\
+	asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x));	\
+								\
+	ia64_intri_res;						\
+})
+
+#define ia64_shrp(a, b, count)								\
+({											\
+	__u64 ia64_intri_res;								\
+	asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count));	\
+	ia64_intri_res;									\
+})
+
+#define ia64_ldfs(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfd(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfe(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf8(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf_fill(regnum, x)				\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_st4_rel_nta(m, val)					\
+({									\
+	asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val));	\
+})
+
+#define ia64_stfs(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfd(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfe(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf8(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf_spill(x, regnum)						\
+({										\
+	register double __f__ asm ("f"#regnum);					\
+	asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_fetchadd4_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd4_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg1(ptr,x)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("xchg1 %0=[%1],%2"					\
+		      : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory");	\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg2(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg4(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg8(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_cmpxchg1_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg1_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_mf()	asm volatile ("mf" ::: "memory")
+#define ia64_mfa()	asm volatile ("mf.a" ::: "memory")
+
+#define ia64_invala() asm volatile ("invala" ::: "memory")
+
+#define ia64_native_thash(addr)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_srlz_i()	asm volatile (";; srlz.i ;;" ::: "memory")
+#define ia64_srlz_d()	asm volatile (";; srlz.d" ::: "memory");
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define ia64_dv_serialize_data()		asm volatile (".serialize.data");
+# define ia64_dv_serialize_instruction()	asm volatile (".serialize.instruction");
+#else
+# define ia64_dv_serialize_data()
+# define ia64_dv_serialize_instruction()
+#endif
+
+#define ia64_nop(x)	asm volatile ("nop %0"::"i"(x));
+
+#define ia64_itci(addr)	asm volatile ("itc.i %0;;" :: "r"(addr) : "memory")
+
+#define ia64_itcd(addr)	asm volatile ("itc.d %0;;" :: "r"(addr) : "memory")
+
+
+#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_tpa(addr)								\
+({										\
+	__u64 ia64_pa;								\
+	asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory");	\
+	ia64_pa;								\
+})
+
+#define __ia64_set_dbr(index, val)						\
+	asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_ibr(index, val)						\
+	asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pkr(index, val)						\
+	asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmc(index, val)						\
+	asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmd(index, val)						\
+	asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_native_set_rr(index, val)							\
+	asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory");
+
+#define ia64_native_get_cpuid(index)							\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index));	\
+	ia64_intri_res;									\
+})
+
+#define __ia64_get_dbr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_ibr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pkr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pmc(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+
+#define ia64_native_get_pmd(index)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_native_get_rr(index)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_native_fc(addr)	asm volatile ("fc %0" :: "r"(addr) : "memory")
+
+
+#define ia64_sync_i()	asm volatile (";; sync.i" ::: "memory")
+
+#define ia64_native_ssm(mask)	asm volatile ("ssm %0":: "i"((mask)) : "memory")
+#define ia64_native_rsm(mask)	asm volatile ("rsm %0":: "i"((mask)) : "memory")
+#define ia64_sum(mask)	asm volatile ("sum %0":: "i"((mask)) : "memory")
+#define ia64_rum(mask)	asm volatile ("rum %0":: "i"((mask)) : "memory")
+
+#define ia64_ptce(addr)	asm volatile ("ptc.e %0" :: "r"(addr))
+
+#define ia64_native_ptcga(addr, size)						\
+do {										\
+	asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptcl(addr, size)							\
+do {										\
+	asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptri(addr, size)						\
+	asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ptrd(addr, size)						\
+	asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ttag(addr)							\
+({									  \
+	__u64 ia64_intri_res;						   \
+	asm volatile ("ttag %0=%1" : "=r"(ia64_intri_res) : "r" (addr));   \
+	ia64_intri_res;							 \
+})
+
+
+/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */
+
+#define ia64_lfhint_none   0
+#define ia64_lfhint_nt1    1
+#define ia64_lfhint_nt2    2
+#define ia64_lfhint_nta    3
+
+#define ia64_lfetch(lfhint, y)					\
+({								\
+        switch (lfhint) {					\
+        case ia64_lfhint_none:					\
+                asm volatile ("lfetch [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt1:					\
+                asm volatile ("lfetch.nt1 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt2:					\
+                asm volatile ("lfetch.nt2 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nta:					\
+                asm volatile ("lfetch.nta [%0]" : : "r"(y));	\
+                break;						\
+        }							\
+})
+
+#define ia64_lfetch_excl(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.excl [%0]" :: "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault [%0]" : : "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.nta [%0]" : : "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault_excl(lfhint, y)				\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault.excl [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_native_intrin_local_irq_restore(x)			\
+do {								\
+	asm volatile (";;   cmp.ne p6,p7=%0,r0;;"		\
+		      "(p6) ssm psr.i;"				\
+		      "(p7) rsm psr.i;;"			\
+		      "(p6) srlz.d"				\
+		      :: "r"((x)) : "p6", "p7", "memory");	\
+} while (0)
+
+#endif /* _ASM_IA64_GCC_INTRIN_H */
diff --git a/arch/ia64/include/asm/hardirq.h b/arch/ia64/include/asm/hardirq.h
new file mode 100644
index 00000000000..140e495b8e0
--- /dev/null
+++ b/arch/ia64/include/asm/hardirq.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_IA64_HARDIRQ_H
+#define _ASM_IA64_HARDIRQ_H
+
+/*
+ * Modified 1998-2002, 2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+#include <asm/processor.h>
+
+/*
+ * No irq_cpustat_t for IA-64.  The data is held in the per-CPU data structure.
+ */
+
+#define __ARCH_IRQ_STAT	1
+
+#define local_softirq_pending()		(local_cpu_data->softirq_pending)
+
+#define HARDIRQ_BITS	14
+
+/*
+ * The hardirq mask has to be large enough to have space for potentially all IRQ sources
+ * in the system nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+extern void __iomem *ipi_base_addr;
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_IA64_HARDIRQ_H */
diff --git a/arch/ia64/include/asm/hpsim.h b/arch/ia64/include/asm/hpsim.h
new file mode 100644
index 00000000000..892ab198a9d
--- /dev/null
+++ b/arch/ia64/include/asm/hpsim.h
@@ -0,0 +1,16 @@
+#ifndef _ASMIA64_HPSIM_H
+#define _ASMIA64_HPSIM_H
+
+#ifndef CONFIG_HP_SIMSERIAL_CONSOLE
+static inline int simcons_register(void) { return 1; }
+#else
+int simcons_register(void);
+#endif
+
+struct tty_driver;
+extern struct tty_driver *hp_simserial_driver;
+
+void ia64_ssc_connect_irq(long intr, long irq);
+void ia64_ctl_trace(long on);
+
+#endif
diff --git a/arch/ia64/include/asm/hugetlb.h b/arch/ia64/include/asm/hugetlb.h
new file mode 100644
index 00000000000..da55c63728e
--- /dev/null
+++ b/arch/ia64/include/asm/hugetlb.h
@@ -0,0 +1,80 @@
+#ifndef _ASM_IA64_HUGETLB_H
+#define _ASM_IA64_HUGETLB_H
+
+#include <asm/page.h>
+
+
+void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
+			    unsigned long end, unsigned long floor,
+			    unsigned long ceiling);
+
+int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len)
+{
+	return (REGION_NUMBER(addr) == RGN_HPAGE ||
+		REGION_NUMBER((addr)+(len)-1) == RGN_HPAGE);
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
+{
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_IA64_HUGETLB_H */
diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h
new file mode 100644
index 00000000000..5c99cbcb8a0
--- /dev/null
+++ b/arch/ia64/include/asm/hw_irq.h
@@ -0,0 +1,192 @@
+#ifndef _ASM_IA64_HW_IRQ_H
+#define _ASM_IA64_HW_IRQ_H
+
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/profile.h>
+
+#include <asm/machvec.h>
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+#ifndef CONFIG_PARAVIRT
+typedef u8 ia64_vector;
+#else
+typedef u16 ia64_vector;
+#endif
+
+/*
+ * 0 special
+ *
+ * 1,3-14 are reserved from firmware
+ *
+ * 16-255 (vectored external interrupts) are available
+ *
+ * 15 spurious interrupt (see IVR)
+ *
+ * 16 lowest priority, 255 highest priority
+ *
+ * 15 classes of 16 interrupts each.
+ */
+#define IA64_MIN_VECTORED_IRQ		 16
+#define IA64_MAX_VECTORED_IRQ		255
+#define IA64_NUM_VECTORS		256
+
+#define AUTO_ASSIGN			-1
+
+#define IA64_SPURIOUS_INT_VECTOR	0x0f
+
+/*
+ * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
+ */
+#define IA64_CPEP_VECTOR		0x1c	/* corrected platform error polling vector */
+#define IA64_CMCP_VECTOR		0x1d	/* corrected machine-check polling vector */
+#define IA64_CPE_VECTOR			0x1e	/* corrected platform error interrupt vector */
+#define IA64_CMC_VECTOR			0x1f	/* corrected machine-check interrupt vector */
+/*
+ * Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
+ * Use vectors 0x30-0xe7 as the default device vector range for ia64.
+ * Platforms may choose to reduce this range in platform_irq_setup, but the
+ * platform range must fall within
+ *	[IA64_DEF_FIRST_DEVICE_VECTOR..IA64_DEF_LAST_DEVICE_VECTOR]
+ */
+extern int ia64_first_device_vector;
+extern int ia64_last_device_vector;
+
+#define IA64_DEF_FIRST_DEVICE_VECTOR	0x30
+#define IA64_DEF_LAST_DEVICE_VECTOR	0xe7
+#define IA64_FIRST_DEVICE_VECTOR	ia64_first_device_vector
+#define IA64_LAST_DEVICE_VECTOR		ia64_last_device_vector
+#define IA64_MAX_DEVICE_VECTORS		(IA64_DEF_LAST_DEVICE_VECTOR - IA64_DEF_FIRST_DEVICE_VECTOR + 1)
+#define IA64_NUM_DEVICE_VECTORS		(IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
+
+#define IA64_MCA_RENDEZ_VECTOR		0xe8	/* MCA rendez interrupt */
+#define IA64_PERFMON_VECTOR		0xee	/* performance monitor interrupt vector */
+#define IA64_TIMER_VECTOR		0xef	/* use highest-prio group 15 interrupt for timer */
+#define	IA64_MCA_WAKEUP_VECTOR		0xf0	/* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
+#define IA64_IPI_LOCAL_TLB_FLUSH	0xfc	/* SMP flush local TLB */
+#define IA64_IPI_RESCHEDULE		0xfd	/* SMP reschedule */
+#define IA64_IPI_VECTOR			0xfe	/* inter-processor interrupt vector */
+
+/* Used for encoding redirected irqs */
+
+#define IA64_IRQ_REDIRECTED		(1 << 31)
+
+/* IA64 inter-cpu interrupt related definitions */
+
+#define IA64_IPI_DEFAULT_BASE_ADDR	0xfee00000
+
+/* Delivery modes for inter-cpu interrupts */
+enum {
+        IA64_IPI_DM_INT =       0x0,    /* pend an external interrupt */
+        IA64_IPI_DM_PMI =       0x2,    /* pend a PMI */
+        IA64_IPI_DM_NMI =       0x4,    /* pend an NMI (vector 2) */
+        IA64_IPI_DM_INIT =      0x5,    /* pend an INIT interrupt */
+        IA64_IPI_DM_EXTINT =    0x7,    /* pend an 8259-compatible interrupt. */
+};
+
+extern __u8 isa_irq_to_vector_map[16];
+#define isa_irq_to_vector(x)	isa_irq_to_vector_map[(x)]
+
+struct irq_cfg {
+	ia64_vector vector;
+	cpumask_t domain;
+	cpumask_t old_domain;
+	unsigned move_cleanup_count;
+	u8 move_in_progress : 1;
+};
+extern spinlock_t vector_lock;
+extern struct irq_cfg irq_cfg[NR_IRQS];
+#define irq_to_domain(x)	irq_cfg[(x)].domain
+DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq);
+
+extern struct hw_interrupt_type irq_type_ia64_lsapic;	/* CPU-internal interrupt controller */
+
+#ifdef CONFIG_PARAVIRT_GUEST
+#include <asm/paravirt.h>
+#else
+#define ia64_register_ipi	ia64_native_register_ipi
+#define assign_irq_vector	ia64_native_assign_irq_vector
+#define free_irq_vector		ia64_native_free_irq_vector
+#define register_percpu_irq	ia64_native_register_percpu_irq
+#define ia64_resend_irq		ia64_native_resend_irq
+#endif
+
+extern void ia64_native_register_ipi(void);
+extern int bind_irq_vector(int irq, int vector, cpumask_t domain);
+extern int ia64_native_assign_irq_vector (int irq);	/* allocate a free vector */
+extern void ia64_native_free_irq_vector (int vector);
+extern int reserve_irq_vector (int vector);
+extern void __setup_vector_irq(int cpu);
+extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
+extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action);
+extern int check_irq_used (int irq);
+extern void destroy_and_reserve_irq (unsigned int irq);
+
+#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+extern int irq_prepare_move(int irq, int cpu);
+extern void irq_complete_move(unsigned int irq);
+#else
+static inline int irq_prepare_move(int irq, int cpu) { return 0; }
+static inline void irq_complete_move(unsigned int irq) {}
+#endif
+
+static inline void ia64_native_resend_irq(unsigned int vector)
+{
+	platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
+}
+
+/*
+ * Default implementations for the irq-descriptor API:
+ */
+
+extern irq_desc_t irq_desc[NR_IRQS];
+
+#ifndef CONFIG_IA64_GENERIC
+static inline ia64_vector __ia64_irq_to_vector(int irq)
+{
+	return irq_cfg[irq].vector;
+}
+
+static inline unsigned int
+__ia64_local_vector_to_irq (ia64_vector vec)
+{
+	return __get_cpu_var(vector_irq)[vec];
+}
+#endif
+
+/*
+ * Next follows the irq descriptor interface.  On IA-64, each CPU supports 256 interrupt
+ * vectors.  On smaller systems, there is a one-to-one correspondence between interrupt
+ * vectors and the Linux irq numbers.  However, larger systems may have multiple interrupt
+ * domains meaning that the translation from vector number to irq number depends on the
+ * interrupt domain that a CPU belongs to.  This API abstracts such platform-dependent
+ * differences and provides a uniform means to translate between vector and irq numbers
+ * and to obtain the irq descriptor for a given irq number.
+ */
+
+/* Extract the IA-64 vector that corresponds to IRQ.  */
+static inline ia64_vector
+irq_to_vector (int irq)
+{
+	return platform_irq_to_vector(irq);
+}
+
+/*
+ * Convert the local IA-64 vector to the corresponding irq number.  This translation is
+ * done in the context of the interrupt domain that the currently executing CPU belongs
+ * to.
+ */
+static inline unsigned int
+local_vector_to_irq (ia64_vector vec)
+{
+	return platform_local_vector_to_irq(vec);
+}
+
+#endif /* _ASM_IA64_HW_IRQ_H */
diff --git a/arch/ia64/include/asm/ia32.h b/arch/ia64/include/asm/ia32.h
new file mode 100644
index 00000000000..2390ee145aa
--- /dev/null
+++ b/arch/ia64/include/asm/ia32.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_IA64_IA32_H
+#define _ASM_IA64_IA32_H
+
+
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+
+#define IA32_NR_syscalls		285	/* length of syscall table */
+#define IA32_PAGE_SHIFT			12	/* 4KB pages */
+
+#ifndef __ASSEMBLY__
+
+# ifdef CONFIG_IA32_SUPPORT
+
+#define IA32_PAGE_OFFSET	0xc0000000
+
+extern void ia32_cpu_init (void);
+extern void ia32_mem_init (void);
+extern void ia32_gdt_init (void);
+extern int ia32_exception (struct pt_regs *regs, unsigned long isr);
+extern int ia32_intercept (struct pt_regs *regs, unsigned long isr);
+extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs);
+
+# endif /* !CONFIG_IA32_SUPPORT */
+
+/* Declare this unconditionally, so we don't get warnings for unreachable code.  */
+extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
+			      sigset_t *set, struct pt_regs *regs);
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+extern int ia32_copy_ia64_partial_page_list(struct task_struct *,
+					unsigned long);
+extern void ia32_drop_ia64_partial_page_list(struct task_struct *);
+#else
+# define ia32_copy_ia64_partial_page_list(a1, a2)	0
+# define ia32_drop_ia64_partial_page_list(a1)	do { ; } while (0)
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_IA32_H */
diff --git a/arch/ia64/include/asm/ia64regs.h b/arch/ia64/include/asm/ia64regs.h
new file mode 100644
index 00000000000..1757f1c11ad
--- /dev/null
+++ b/arch/ia64/include/asm/ia64regs.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2002,2003 Intel Corp.
+ *      Jun Nakajima <jun.nakajima@intel.com>
+ *      Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#ifndef _ASM_IA64_IA64REGS_H
+#define _ASM_IA64_IA64REGS_H
+
+/*
+ * Register Names for getreg() and setreg().
+ *
+ * The "magic" numbers happen to match the values used by the Intel compiler's
+ * getreg()/setreg() intrinsics.
+ */
+
+/* Special Registers */
+
+#define _IA64_REG_IP		1016	/* getreg only */
+#define _IA64_REG_PSR		1019
+#define _IA64_REG_PSR_L		1019
+
+/* General Integer Registers */
+
+#define _IA64_REG_GP		1025	/* R1 */
+#define _IA64_REG_R8		1032	/* R8 */
+#define _IA64_REG_R9		1033	/* R9 */
+#define _IA64_REG_SP		1036	/* R12 */
+#define _IA64_REG_TP		1037	/* R13 */
+
+/* Application Registers */
+
+#define _IA64_REG_AR_KR0	3072
+#define _IA64_REG_AR_KR1	3073
+#define _IA64_REG_AR_KR2	3074
+#define _IA64_REG_AR_KR3	3075
+#define _IA64_REG_AR_KR4	3076
+#define _IA64_REG_AR_KR5	3077
+#define _IA64_REG_AR_KR6	3078
+#define _IA64_REG_AR_KR7	3079
+#define _IA64_REG_AR_RSC	3088
+#define _IA64_REG_AR_BSP	3089
+#define _IA64_REG_AR_BSPSTORE	3090
+#define _IA64_REG_AR_RNAT	3091
+#define _IA64_REG_AR_FCR	3093
+#define _IA64_REG_AR_EFLAG	3096
+#define _IA64_REG_AR_CSD	3097
+#define _IA64_REG_AR_SSD	3098
+#define _IA64_REG_AR_CFLAG	3099
+#define _IA64_REG_AR_FSR	3100
+#define _IA64_REG_AR_FIR	3101
+#define _IA64_REG_AR_FDR	3102
+#define _IA64_REG_AR_CCV	3104
+#define _IA64_REG_AR_UNAT	3108
+#define _IA64_REG_AR_FPSR	3112
+#define _IA64_REG_AR_ITC	3116
+#define _IA64_REG_AR_PFS	3136
+#define _IA64_REG_AR_LC		3137
+#define _IA64_REG_AR_EC		3138
+
+/* Control Registers */
+
+#define _IA64_REG_CR_DCR	4096
+#define _IA64_REG_CR_ITM	4097
+#define _IA64_REG_CR_IVA	4098
+#define _IA64_REG_CR_PTA	4104
+#define _IA64_REG_CR_IPSR	4112
+#define _IA64_REG_CR_ISR	4113
+#define _IA64_REG_CR_IIP	4115
+#define _IA64_REG_CR_IFA	4116
+#define _IA64_REG_CR_ITIR	4117
+#define _IA64_REG_CR_IIPA	4118
+#define _IA64_REG_CR_IFS	4119
+#define _IA64_REG_CR_IIM	4120
+#define _IA64_REG_CR_IHA	4121
+#define _IA64_REG_CR_LID	4160
+#define _IA64_REG_CR_IVR	4161	/* getreg only */
+#define _IA64_REG_CR_TPR	4162
+#define _IA64_REG_CR_EOI	4163
+#define _IA64_REG_CR_IRR0	4164	/* getreg only */
+#define _IA64_REG_CR_IRR1	4165	/* getreg only */
+#define _IA64_REG_CR_IRR2	4166	/* getreg only */
+#define _IA64_REG_CR_IRR3	4167	/* getreg only */
+#define _IA64_REG_CR_ITV	4168
+#define _IA64_REG_CR_PMV	4169
+#define _IA64_REG_CR_CMCV	4170
+#define _IA64_REG_CR_LRR0	4176
+#define _IA64_REG_CR_LRR1	4177
+
+/* Indirect Registers for getindreg() and setindreg() */
+
+#define _IA64_REG_INDR_CPUID	9000	/* getindreg only */
+#define _IA64_REG_INDR_DBR	9001
+#define _IA64_REG_INDR_IBR	9002
+#define _IA64_REG_INDR_PKR	9003
+#define _IA64_REG_INDR_PMC	9004
+#define _IA64_REG_INDR_PMD	9005
+#define _IA64_REG_INDR_RR	9006
+
+#endif /* _ASM_IA64_IA64REGS_H */
diff --git a/arch/ia64/include/asm/intel_intrin.h b/arch/ia64/include/asm/intel_intrin.h
new file mode 100644
index 00000000000..53cec577558
--- /dev/null
+++ b/arch/ia64/include/asm/intel_intrin.h
@@ -0,0 +1,161 @@
+#ifndef _ASM_IA64_INTEL_INTRIN_H
+#define _ASM_IA64_INTEL_INTRIN_H
+/*
+ * Intel Compiler Intrinsics
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ * Copyright (C) 2005,2006 Hongjiu Lu <hongjiu.lu@intel.com>
+ *
+ */
+#include <ia64intrin.h>
+
+#define ia64_barrier()		__memory_barrier()
+
+#define ia64_stop()	/* Nothing: As of now stop bit is generated for each
+		 	 * intrinsic
+		 	 */
+
+#define ia64_native_getreg	__getReg
+#define ia64_native_setreg	__setReg
+
+#define ia64_hint		__hint
+#define ia64_hint_pause		__hint_pause
+
+#define ia64_mux1_brcst		_m64_mux1_brcst
+#define ia64_mux1_mix		_m64_mux1_mix
+#define ia64_mux1_shuf		_m64_mux1_shuf
+#define ia64_mux1_alt		_m64_mux1_alt
+#define ia64_mux1_rev		_m64_mux1_rev
+
+#define ia64_mux1(x,v)		_m_to_int64(_m64_mux1(_m_from_int64(x), (v)))
+#define ia64_popcnt		_m64_popcnt
+#define ia64_getf_exp		__getf_exp
+#define ia64_shrp		_m64_shrp
+
+#define ia64_tpa		__tpa
+#define ia64_invala		__invala
+#define ia64_invala_gr		__invala_gr
+#define ia64_invala_fr		__invala_fr
+#define ia64_nop		__nop
+#define ia64_sum		__sum
+#define ia64_native_ssm		__ssm
+#define ia64_rum		__rum
+#define ia64_native_rsm		__rsm
+#define ia64_native_fc 		__fc
+
+#define ia64_ldfs		__ldfs
+#define ia64_ldfd		__ldfd
+#define ia64_ldfe		__ldfe
+#define ia64_ldf8		__ldf8
+#define ia64_ldf_fill		__ldf_fill
+
+#define ia64_stfs		__stfs
+#define ia64_stfd		__stfd
+#define ia64_stfe		__stfe
+#define ia64_stf8		__stf8
+#define ia64_stf_spill		__stf_spill
+
+#define ia64_mf			__mf
+#define ia64_mfa		__mfa
+
+#define ia64_fetchadd4_acq	__fetchadd4_acq
+#define ia64_fetchadd4_rel	__fetchadd4_rel
+#define ia64_fetchadd8_acq	__fetchadd8_acq
+#define ia64_fetchadd8_rel	__fetchadd8_rel
+
+#define ia64_xchg1		_InterlockedExchange8
+#define ia64_xchg2		_InterlockedExchange16
+#define ia64_xchg4		_InterlockedExchange
+#define ia64_xchg8		_InterlockedExchange64
+
+#define ia64_cmpxchg1_rel	_InterlockedCompareExchange8_rel
+#define ia64_cmpxchg1_acq	_InterlockedCompareExchange8_acq
+#define ia64_cmpxchg2_rel	_InterlockedCompareExchange16_rel
+#define ia64_cmpxchg2_acq	_InterlockedCompareExchange16_acq
+#define ia64_cmpxchg4_rel	_InterlockedCompareExchange_rel
+#define ia64_cmpxchg4_acq	_InterlockedCompareExchange_acq
+#define ia64_cmpxchg8_rel	_InterlockedCompareExchange64_rel
+#define ia64_cmpxchg8_acq	_InterlockedCompareExchange64_acq
+
+#define __ia64_set_dbr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_DBR, index, val)
+#define ia64_set_ibr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_IBR, index, val)
+#define ia64_set_pkr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PKR, index, val)
+#define ia64_set_pmc(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PMC, index, val)
+#define ia64_set_pmd(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PMD, index, val)
+#define ia64_native_set_rr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_RR, index, val)
+
+#define ia64_native_get_cpuid(index)	\
+		__getIndReg(_IA64_REG_INDR_CPUID, index)
+#define __ia64_get_dbr(index)		__getIndReg(_IA64_REG_INDR_DBR, index)
+#define ia64_get_ibr(index)		__getIndReg(_IA64_REG_INDR_IBR, index)
+#define ia64_get_pkr(index)		__getIndReg(_IA64_REG_INDR_PKR, index)
+#define ia64_get_pmc(index)		__getIndReg(_IA64_REG_INDR_PMC, index)
+#define ia64_native_get_pmd(index)	__getIndReg(_IA64_REG_INDR_PMD, index)
+#define ia64_native_get_rr(index)	__getIndReg(_IA64_REG_INDR_RR, index)
+
+#define ia64_srlz_d		__dsrlz
+#define ia64_srlz_i		__isrlz
+
+#define ia64_dv_serialize_data()
+#define ia64_dv_serialize_instruction()
+
+#define ia64_st1_rel		__st1_rel
+#define ia64_st2_rel		__st2_rel
+#define ia64_st4_rel		__st4_rel
+#define ia64_st8_rel		__st8_rel
+
+/* FIXME: need st4.rel.nta intrinsic */
+#define ia64_st4_rel_nta	__st4_rel
+
+#define ia64_ld1_acq		__ld1_acq
+#define ia64_ld2_acq		__ld2_acq
+#define ia64_ld4_acq		__ld4_acq
+#define ia64_ld8_acq		__ld8_acq
+
+#define ia64_sync_i		__synci
+#define ia64_native_thash	__thash
+#define ia64_native_ttag	__ttag
+#define ia64_itcd		__itcd
+#define ia64_itci		__itci
+#define ia64_itrd		__itrd
+#define ia64_itri		__itri
+#define ia64_ptce		__ptce
+#define ia64_ptcl		__ptcl
+#define ia64_native_ptcg	__ptcg
+#define ia64_native_ptcga	__ptcga
+#define ia64_ptri		__ptri
+#define ia64_ptrd		__ptrd
+#define ia64_dep_mi		_m64_dep_mi
+
+/* Values for lfhint in __lfetch and __lfetch_fault */
+
+#define ia64_lfhint_none	__lfhint_none
+#define ia64_lfhint_nt1		__lfhint_nt1
+#define ia64_lfhint_nt2		__lfhint_nt2
+#define ia64_lfhint_nta		__lfhint_nta
+
+#define ia64_lfetch		__lfetch
+#define ia64_lfetch_excl	__lfetch_excl
+#define ia64_lfetch_fault	__lfetch_fault
+#define ia64_lfetch_fault_excl	__lfetch_fault_excl
+
+#define ia64_native_intrin_local_irq_restore(x)		\
+do {							\
+	if ((x) != 0) {					\
+		ia64_native_ssm(IA64_PSR_I);		\
+		ia64_srlz_d();				\
+	} else {					\
+		ia64_native_rsm(IA64_PSR_I);		\
+	}						\
+} while (0)
+
+#define __builtin_trap()	__break(0);
+
+#endif /* _ASM_IA64_INTEL_INTRIN_H */
diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h
new file mode 100644
index 00000000000..47d686dba1e
--- /dev/null
+++ b/arch/ia64/include/asm/intrinsics.h
@@ -0,0 +1,241 @@
+#ifndef _ASM_IA64_INTRINSICS_H
+#define _ASM_IA64_INTRINSICS_H
+
+/*
+ * Compiler-dependent intrinsics.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+/* include compiler specific intrinsics */
+#include <asm/ia64regs.h>
+#ifdef __INTEL_COMPILER
+# include <asm/intel_intrin.h>
+#else
+# include <asm/gcc_intrin.h>
+#endif
+
+#define ia64_native_get_psr_i()	(ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I)
+
+#define ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4)	\
+do {									\
+	ia64_native_set_rr(0x0000000000000000UL, (val0));		\
+	ia64_native_set_rr(0x2000000000000000UL, (val1));		\
+	ia64_native_set_rr(0x4000000000000000UL, (val2));		\
+	ia64_native_set_rr(0x6000000000000000UL, (val3));		\
+	ia64_native_set_rr(0x8000000000000000UL, (val4));		\
+} while (0)
+
+/*
+ * Force an unresolved reference if someone tries to use
+ * ia64_fetch_and_add() with a bad value.
+ */
+extern unsigned long __bad_size_for_ia64_fetch_and_add (void);
+extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
+
+#define IA64_FETCHADD(tmp,v,n,sz,sem)						\
+({										\
+	switch (sz) {								\
+	      case 4:								\
+	        tmp = ia64_fetchadd4_##sem((unsigned int *) v, n);		\
+		break;								\
+										\
+	      case 8:								\
+	        tmp = ia64_fetchadd8_##sem((unsigned long *) v, n);		\
+		break;								\
+										\
+	      default:								\
+		__bad_size_for_ia64_fetch_and_add();				\
+	}									\
+})
+
+#define ia64_fetchadd(i,v,sem)								\
+({											\
+	__u64 _tmp;									\
+	volatile __typeof__(*(v)) *_v = (v);						\
+	/* Can't use a switch () here: gcc isn't always smart enough for that... */	\
+	if ((i) == -16)									\
+		IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem);			\
+	else if ((i) == -8)								\
+		IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem);				\
+	else if ((i) == -4)								\
+		IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem);				\
+	else if ((i) == -1)								\
+		IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem);				\
+	else if ((i) == 1)								\
+		IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem);				\
+	else if ((i) == 4)								\
+		IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem);				\
+	else if ((i) == 8)								\
+		IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem);				\
+	else if ((i) == 16)								\
+		IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem);				\
+	else										\
+		_tmp = __bad_increment_for_ia64_fetch_and_add();			\
+	(__typeof__(*(v))) (_tmp);	/* return old value */				\
+})
+
+#define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalid xchg().
+ */
+extern void ia64_xchg_called_with_bad_pointer (void);
+
+#define __xchg(x,ptr,size)						\
+({									\
+	unsigned long __xchg_result;					\
+									\
+	switch (size) {							\
+	      case 1:							\
+		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
+		break;							\
+									\
+	      case 2:							\
+		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
+		break;							\
+									\
+	      case 4:							\
+		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
+		break;							\
+									\
+	      case 8:							\
+		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
+		break;							\
+	      default:							\
+		ia64_xchg_called_with_bad_pointer();			\
+	}								\
+	__xchg_result;							\
+})
+
+#define xchg(ptr,x)							     \
+  ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern long ia64_cmpxchg_called_with_bad_pointer (void);
+
+#define ia64_cmpxchg(sem,ptr,old,new,size)						\
+({											\
+	__u64 _o_, _r_;									\
+											\
+	switch (size) {									\
+	      case 1: _o_ = (__u8 ) (long) (old); break;				\
+	      case 2: _o_ = (__u16) (long) (old); break;				\
+	      case 4: _o_ = (__u32) (long) (old); break;				\
+	      case 8: _o_ = (__u64) (long) (old); break;				\
+	      default: break;								\
+	}										\
+	switch (size) {									\
+	      case 1:									\
+	      	_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 2:									\
+	       _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 4:									\
+	      	_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 8:									\
+		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      default:									\
+		_r_ = ia64_cmpxchg_called_with_bad_pointer();				\
+		break;									\
+	}										\
+	(__typeof__(old)) _r_;								\
+})
+
+#define cmpxchg_acq(ptr, o, n)	\
+	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
+#define cmpxchg_rel(ptr, o, n)	\
+	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
+
+/* for compatibility with other platforms: */
+#define cmpxchg(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
+#define cmpxchg64(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
+
+#define cmpxchg_local		cmpxchg
+#define cmpxchg64_local		cmpxchg64
+
+#ifdef CONFIG_IA64_DEBUG_CMPXCHG
+# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
+# define CMPXCHG_BUGCHECK(v)							\
+  do {										\
+	if (_cmpxchg_bugcheck_count-- <= 0) {					\
+		void *ip;							\
+		extern int printk(const char *fmt, ...);			\
+		ip = (void *) ia64_getreg(_IA64_REG_IP);			\
+		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));	\
+		break;								\
+	}									\
+  } while (0)
+#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
+# define CMPXCHG_BUGCHECK_DECL
+# define CMPXCHG_BUGCHECK(v)
+#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
+
+#endif
+
+#ifdef __KERNEL__
+#include <asm/paravirt_privop.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_PARAVIRT) && defined(__KERNEL__)
+#define IA64_INTRINSIC_API(name)	pv_cpu_ops.name
+#define IA64_INTRINSIC_MACRO(name)	paravirt_ ## name
+#else
+#define IA64_INTRINSIC_API(name)	ia64_native_ ## name
+#define IA64_INTRINSIC_MACRO(name)	ia64_native_ ## name
+#endif
+
+/************************************************/
+/* Instructions paravirtualized for correctness */
+/************************************************/
+/* fc, thash, get_cpuid, get_pmd, get_eflags, set_eflags */
+/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag"
+ * is not currently used (though it may be in a long-format VHPT system!)
+ */
+#define ia64_fc				IA64_INTRINSIC_API(fc)
+#define ia64_thash			IA64_INTRINSIC_API(thash)
+#define ia64_get_cpuid			IA64_INTRINSIC_API(get_cpuid)
+#define ia64_get_pmd			IA64_INTRINSIC_API(get_pmd)
+
+
+/************************************************/
+/* Instructions paravirtualized for performance */
+/************************************************/
+#define ia64_ssm			IA64_INTRINSIC_MACRO(ssm)
+#define ia64_rsm			IA64_INTRINSIC_MACRO(rsm)
+#define ia64_getreg			IA64_INTRINSIC_API(getreg)
+#define ia64_setreg			IA64_INTRINSIC_API(setreg)
+#define ia64_set_rr			IA64_INTRINSIC_API(set_rr)
+#define ia64_get_rr			IA64_INTRINSIC_API(get_rr)
+#define ia64_ptcga			IA64_INTRINSIC_API(ptcga)
+#define ia64_get_psr_i			IA64_INTRINSIC_API(get_psr_i)
+#define ia64_intrin_local_irq_restore	\
+	IA64_INTRINSIC_API(intrin_local_irq_restore)
+#define ia64_set_rr0_to_rr4		IA64_INTRINSIC_API(set_rr0_to_rr4)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_INTRINSICS_H */
diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
new file mode 100644
index 00000000000..7f257507cd8
--- /dev/null
+++ b/arch/ia64/include/asm/io.h
@@ -0,0 +1,461 @@
+#ifndef _ASM_IA64_IO_H
+#define _ASM_IA64_IO_H
+
+/*
+ * This file contains the definitions for the emulated IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated to
+ * (a) handle it all in a way that makes gcc able to optimize it as
+ * well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <asm/unaligned.h>
+
+/* We don't use IO slowdowns on the ia64, but.. */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+#define __IA64_UNCACHED_OFFSET	RGN_BASE(RGN_UNCACHED)
+
+/*
+ * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but
+ * large machines may have multiple other I/O spaces so we can't place any a priori limit
+ * on IO_SPACE_LIMIT.  These additional spaces are described in ACPI.
+ */
+#define IO_SPACE_LIMIT		0xffffffffffffffffUL
+
+#define MAX_IO_SPACES_BITS		8
+#define MAX_IO_SPACES			(1UL << MAX_IO_SPACES_BITS)
+#define IO_SPACE_BITS			24
+#define IO_SPACE_SIZE			(1UL << IO_SPACE_BITS)
+
+#define IO_SPACE_NR(port)		((port) >> IO_SPACE_BITS)
+#define IO_SPACE_BASE(space)		((space) << IO_SPACE_BITS)
+#define IO_SPACE_PORT(port)		((port) & (IO_SPACE_SIZE - 1))
+
+#define IO_SPACE_SPARSE_ENCODING(p)	((((p) >> 2) << 12) | ((p) & 0xfff))
+
+struct io_space {
+	unsigned long mmio_base;	/* base in MMIO space */
+	int sparse;
+};
+
+extern struct io_space io_space[];
+extern unsigned int num_io_spaces;
+
+# ifdef __KERNEL__
+
+/*
+ * All MMIO iomem cookies are in region 6; anything less is a PIO cookie:
+ *	0xCxxxxxxxxxxxxxxx	MMIO cookie (return from ioremap)
+ *	0x000000001SPPPPPP	PIO cookie (S=space number, P..P=port)
+ *
+ * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch
+ * code that uses bare port numbers without the prerequisite pci_iomap().
+ */
+#define PIO_OFFSET		(1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS))
+#define PIO_MASK		(PIO_OFFSET - 1)
+#define PIO_RESERVED		__IA64_UNCACHED_OFFSET
+#define HAVE_ARCH_PIO_SIZE
+
+#include <asm/intrinsics.h>
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm-generic/iomap.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+static inline unsigned long
+virt_to_phys (volatile void *address)
+{
+	return (unsigned long) address - PAGE_OFFSET;
+}
+
+static inline void*
+phys_to_virt (unsigned long address)
+{
+	return (void *) (address + PAGE_OFFSET);
+}
+
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
+extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
+extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
+
+/*
+ * The following two macros are deprecated and scheduled for removal.
+ * Please use the PCI-DMA interface defined in <asm/pci.h> instead.
+ */
+#define bus_to_virt	phys_to_virt
+#define virt_to_bus	virt_to_phys
+#define page_to_bus	page_to_phys
+
+# endif /* KERNEL */
+
+/*
+ * Memory fence w/accept.  This should never be used in code that is
+ * not IA-64 specific.
+ */
+#define __ia64_mf_a()	ia64_mfa()
+
+/**
+ * ___ia64_mmiowb - I/O write barrier
+ *
+ * Ensure ordering of I/O space writes.  This will make sure that writes
+ * following the barrier will arrive after all previous writes.  For most
+ * ia64 platforms, this is a simple 'mf.a' instruction.
+ *
+ * See Documentation/DocBook/deviceiobook.tmpl for more information.
+ */
+static inline void ___ia64_mmiowb(void)
+{
+	ia64_mfa();
+}
+
+static inline void*
+__ia64_mk_io_addr (unsigned long port)
+{
+	struct io_space *space;
+	unsigned long offset;
+
+	space = &io_space[IO_SPACE_NR(port)];
+	port = IO_SPACE_PORT(port);
+	if (space->sparse)
+		offset = IO_SPACE_SPARSE_ENCODING(port);
+	else
+		offset = port;
+
+	return (void *) (space->mmio_base | offset);
+}
+
+#define __ia64_inb	___ia64_inb
+#define __ia64_inw	___ia64_inw
+#define __ia64_inl	___ia64_inl
+#define __ia64_outb	___ia64_outb
+#define __ia64_outw	___ia64_outw
+#define __ia64_outl	___ia64_outl
+#define __ia64_readb	___ia64_readb
+#define __ia64_readw	___ia64_readw
+#define __ia64_readl	___ia64_readl
+#define __ia64_readq	___ia64_readq
+#define __ia64_readb_relaxed	___ia64_readb
+#define __ia64_readw_relaxed	___ia64_readw
+#define __ia64_readl_relaxed	___ia64_readl
+#define __ia64_readq_relaxed	___ia64_readq
+#define __ia64_writeb	___ia64_writeb
+#define __ia64_writew	___ia64_writew
+#define __ia64_writel	___ia64_writel
+#define __ia64_writeq	___ia64_writeq
+#define __ia64_mmiowb	___ia64_mmiowb
+
+/*
+ * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure
+ * that the access has completed before executing other I/O accesses.  Since we're doing
+ * the accesses through an uncachable (UC) translation, the CPU will execute them in
+ * program order.  However, we still need to tell the compiler not to shuffle them around
+ * during optimization, which is why we use "volatile" pointers.
+ */
+
+static inline unsigned int
+___ia64_inb (unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+	unsigned char ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inw (unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+	unsigned short ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inl (unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+	unsigned int ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline void
+___ia64_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+__insb (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned char *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inb(port);
+}
+
+static inline void
+__insw (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned short *dp = dst;
+
+	while (count--)
+		put_unaligned(platform_inw(port), dp++);
+}
+
+static inline void
+__insl (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned int *dp = dst;
+
+	while (count--)
+		put_unaligned(platform_inl(port), dp++);
+}
+
+static inline void
+__outsb (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned char *sp = src;
+
+	while (count--)
+		platform_outb(*sp++, port);
+}
+
+static inline void
+__outsw (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned short *sp = src;
+
+	while (count--)
+		platform_outw(get_unaligned(sp++), port);
+}
+
+static inline void
+__outsl (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned int *sp = src;
+
+	while (count--)
+		platform_outl(get_unaligned(sp++), port);
+}
+
+/*
+ * Unfortunately, some platforms are broken and do not follow the IA-64 architecture
+ * specification regarding legacy I/O support.  Thus, we have to make these operations
+ * platform dependent...
+ */
+#define __inb		platform_inb
+#define __inw		platform_inw
+#define __inl		platform_inl
+#define __outb		platform_outb
+#define __outw		platform_outw
+#define __outl		platform_outl
+#define __mmiowb	platform_mmiowb
+
+#define inb(p)		__inb(p)
+#define inw(p)		__inw(p)
+#define inl(p)		__inl(p)
+#define insb(p,d,c)	__insb(p,d,c)
+#define insw(p,d,c)	__insw(p,d,c)
+#define insl(p,d,c)	__insl(p,d,c)
+#define outb(v,p)	__outb(v,p)
+#define outw(v,p)	__outw(v,p)
+#define outl(v,p)	__outl(v,p)
+#define outsb(p,s,c)	__outsb(p,s,c)
+#define outsw(p,s,c)	__outsw(p,s,c)
+#define outsl(p,s,c)	__outsl(p,s,c)
+#define mmiowb()	__mmiowb()
+
+/*
+ * The address passed to these functions are ioremap()ped already.
+ *
+ * We need these to be machine vectors since some platforms don't provide
+ * DMA coherence via PIO reads (PCI drivers and the spec imply that this is
+ * a good idea).  Writes are ok though for all existing ia64 platforms (and
+ * hopefully it'll stay that way).
+ */
+static inline unsigned char
+___ia64_readb (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___ia64_readw (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___ia64_readl (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___ia64_readq (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+static inline void
+__writeb (unsigned char val, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = val;
+}
+
+static inline void
+__writew (unsigned short val, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = val;
+}
+
+static inline void
+__writel (unsigned int val, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = val;
+}
+
+static inline void
+__writeq (unsigned long val, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *) addr = val;
+}
+
+#define __readb		platform_readb
+#define __readw		platform_readw
+#define __readl		platform_readl
+#define __readq		platform_readq
+#define __readb_relaxed	platform_readb_relaxed
+#define __readw_relaxed	platform_readw_relaxed
+#define __readl_relaxed	platform_readl_relaxed
+#define __readq_relaxed	platform_readq_relaxed
+
+#define readb(a)	__readb((a))
+#define readw(a)	__readw((a))
+#define readl(a)	__readl((a))
+#define readq(a)	__readq((a))
+#define readb_relaxed(a)	__readb_relaxed((a))
+#define readw_relaxed(a)	__readw_relaxed((a))
+#define readl_relaxed(a)	__readl_relaxed((a))
+#define readq_relaxed(a)	__readq_relaxed((a))
+#define __raw_readb	readb
+#define __raw_readw	readw
+#define __raw_readl	readl
+#define __raw_readq	readq
+#define __raw_readb_relaxed	readb_relaxed
+#define __raw_readw_relaxed	readw_relaxed
+#define __raw_readl_relaxed	readl_relaxed
+#define __raw_readq_relaxed	readq_relaxed
+#define writeb(v,a)	__writeb((v), (a))
+#define writew(v,a)	__writew((v), (a))
+#define writel(v,a)	__writel((v), (a))
+#define writeq(v,a)	__writeq((v), (a))
+#define __raw_writeb	writeb
+#define __raw_writew	writew
+#define __raw_writel	writel
+#define __raw_writeq	writeq
+
+#ifndef inb_p
+# define inb_p		inb
+#endif
+#ifndef inw_p
+# define inw_p		inw
+#endif
+#ifndef inl_p
+# define inl_p		inl
+#endif
+
+#ifndef outb_p
+# define outb_p		outb
+#endif
+#ifndef outw_p
+# define outw_p		outw
+#endif
+#ifndef outl_p
+# define outl_p		outl
+#endif
+
+# ifdef __KERNEL__
+
+extern void __iomem * ioremap(unsigned long offset, unsigned long size);
+extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
+extern void iounmap (volatile void __iomem *addr);
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n);
+extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n);
+extern void memset_io(volatile void __iomem *s, int c, long n);
+
+# endif /* __KERNEL__ */
+
+/*
+ * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing.  It is said that
+ * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
+ * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
+ * SPECweb-like workloads on zx1-based machines.  Thus, for now we favor I/O MMU bypassing
+ * over BIO-level virtual merging.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#if 1
+#define BIO_VMERGE_BOUNDARY	0
+#else
+/*
+ * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here.  Should be
+ * replaced by dma_merge_mask() or something of that sort.  Note: the only way
+ * BIO_VMERGE_BOUNDARY is used is to mask off bits.  Effectively, our definition gets
+ * expanded into:
+ *
+ *	addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
+ *
+ * which is precisely what we want.
+ */
+#define BIO_VMERGE_BOUNDARY	(ia64_max_iommu_merge_mask + 1)
+#endif
+
+#endif /* _ASM_IA64_IO_H */
diff --git a/arch/ia64/include/asm/ioctl.h b/arch/ia64/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/ia64/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/asm/ioctls.h
new file mode 100644
index 00000000000..f41b636a0bf
--- /dev/null
+++ b/arch/ia64/include/asm/ioctls.h
@@ -0,0 +1,93 @@
+#ifndef _ASM_IA64_IOCTLS_H
+#define _ASM_IA64_IOCTLS_H
+
+/*
+ * Based on <asm-i386/ioctls.h>
+ *
+ * Modified 1998, 1999, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_IA64_IOCTLS_H */
diff --git a/arch/ia64/include/asm/iosapic.h b/arch/ia64/include/asm/iosapic.h
new file mode 100644
index 00000000000..b9c102e15f2
--- /dev/null
+++ b/arch/ia64/include/asm/iosapic.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_IA64_IOSAPIC_H
+#define __ASM_IA64_IOSAPIC_H
+
+#define	IOSAPIC_REG_SELECT	0x0
+#define	IOSAPIC_WINDOW		0x10
+#define	IOSAPIC_EOI		0x40
+
+#define	IOSAPIC_VERSION		0x1
+
+/*
+ * Redirection table entry
+ */
+#define	IOSAPIC_RTE_LOW(i)	(0x10+i*2)
+#define	IOSAPIC_RTE_HIGH(i)	(0x11+i*2)
+
+#define	IOSAPIC_DEST_SHIFT		16
+
+/*
+ * Delivery mode
+ */
+#define	IOSAPIC_DELIVERY_SHIFT		8
+#define	IOSAPIC_FIXED			0x0
+#define	IOSAPIC_LOWEST_PRIORITY	0x1
+#define	IOSAPIC_PMI			0x2
+#define	IOSAPIC_NMI			0x4
+#define	IOSAPIC_INIT			0x5
+#define	IOSAPIC_EXTINT			0x7
+
+/*
+ * Interrupt polarity
+ */
+#define	IOSAPIC_POLARITY_SHIFT		13
+#define	IOSAPIC_POL_HIGH		0
+#define	IOSAPIC_POL_LOW		1
+
+/*
+ * Trigger mode
+ */
+#define	IOSAPIC_TRIGGER_SHIFT		15
+#define	IOSAPIC_EDGE			0
+#define	IOSAPIC_LEVEL			1
+
+/*
+ * Mask bit
+ */
+
+#define	IOSAPIC_MASK_SHIFT		16
+#define	IOSAPIC_MASK			(1<<IOSAPIC_MASK_SHIFT)
+
+#define IOSAPIC_VECTOR_MASK		0xffffff00
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_IOSAPIC
+
+#define NR_IOSAPICS			256
+
+#ifdef CONFIG_PARAVIRT_GUEST
+#include <asm/paravirt.h>
+#else
+#define iosapic_pcat_compat_init	ia64_native_iosapic_pcat_compat_init
+#define __iosapic_read			__ia64_native_iosapic_read
+#define __iosapic_write			__ia64_native_iosapic_write
+#define iosapic_get_irq_chip		ia64_native_iosapic_get_irq_chip
+#endif
+
+extern void __init ia64_native_iosapic_pcat_compat_init(void);
+extern struct irq_chip *ia64_native_iosapic_get_irq_chip(unsigned long trigger);
+
+static inline unsigned int
+__ia64_native_iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	writel(reg, iosapic + IOSAPIC_REG_SELECT);
+	return readl(iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void
+__ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	writel(reg, iosapic + IOSAPIC_REG_SELECT);
+	writel(val, iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void iosapic_eoi(char __iomem *iosapic, u32 vector)
+{
+	writel(vector, iosapic + IOSAPIC_EOI);
+}
+
+extern void __init iosapic_system_init (int pcat_compat);
+extern int __devinit iosapic_init (unsigned long address,
+				    unsigned int gsi_base);
+#ifdef CONFIG_HOTPLUG
+extern int iosapic_remove (unsigned int gsi_base);
+#else
+#define iosapic_remove(gsi_base)				(-EINVAL)
+#endif /* CONFIG_HOTPLUG */
+extern int gsi_to_irq (unsigned int gsi);
+extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
+				  unsigned long trigger);
+extern void iosapic_unregister_intr (unsigned int irq);
+extern void __devinit iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
+				      unsigned long polarity,
+				      unsigned long trigger);
+extern int __init iosapic_register_platform_intr (u32 int_type,
+					   unsigned int gsi,
+					   int pmi_vector,
+					   u16 eid, u16 id,
+					   unsigned long polarity,
+					   unsigned long trigger);
+
+#ifdef CONFIG_NUMA
+extern void __devinit map_iosapic_to_node (unsigned int, int);
+#endif
+#else
+#define iosapic_system_init(pcat_compat)			do { } while (0)
+#define iosapic_init(address,gsi_base)				(-EINVAL)
+#define iosapic_remove(gsi_base)				(-ENODEV)
+#define iosapic_register_intr(gsi,polarity,trigger)		(gsi)
+#define iosapic_unregister_intr(irq)				do { } while (0)
+#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)	do { } while (0)
+#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
+	polarity,trigger)					(gsi)
+#endif
+
+# endif /* !__ASSEMBLY__ */
+#endif /* __ASM_IA64_IOSAPIC_H */
diff --git a/arch/ia64/include/asm/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..079899ae7d3
--- /dev/null
+++ b/arch/ia64/include/asm/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IA64_IPCBUF_H
+#define _ASM_IA64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IA64_IPCBUF_H */
diff --git a/arch/ia64/include/asm/irq.h b/arch/ia64/include/asm/irq.h
new file mode 100644
index 00000000000..3627116fb0e
--- /dev/null
+++ b/arch/ia64/include/asm/irq.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_IA64_IRQ_H
+#define _ASM_IA64_IRQ_H
+
+/*
+ * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * 11/24/98	S.Eranian 	updated TIMER_IRQ and irq_canonicalize
+ * 01/20/99	S.Eranian	added keyboard interrupt
+ * 02/29/00     D.Mosberger	moved most things into hw_irq.h
+ */
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm-ia64/nr-irqs.h>
+
+static __inline__ int
+irq_canonicalize (int irq)
+{
+	/*
+	 * We do the legacy thing here of pretending that irqs < 16
+	 * are 8259 irqs.  This really shouldn't be necessary at all,
+	 * but we keep it here as serial.c still uses it...
+	 */
+	return ((irq == 2) ? 9 : irq);
+}
+
+extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
+bool is_affinity_mask_valid(cpumask_t cpumask);
+
+#define is_affinity_mask_valid is_affinity_mask_valid
+
+#endif /* _ASM_IA64_IRQ_H */
diff --git a/arch/ia64/include/asm/irq_regs.h b/arch/ia64/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/ia64/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/ia64/include/asm/kdebug.h b/arch/ia64/include/asm/kdebug.h
new file mode 100644
index 00000000000..d11a6985503
--- /dev/null
+++ b/arch/ia64/include/asm/kdebug.h
@@ -0,0 +1,57 @@
+#ifndef _IA64_KDEBUG_H
+#define _IA64_KDEBUG_H 1
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) Intel Corporation, 2005
+ *
+ * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
+ *              <anil.s.keshavamurthy@intel.com> adopted from
+ *              include/asm-x86_64/kdebug.h
+ *
+ * 2005-Oct	Keith Owens <kaos@sgi.com>.  Expand notify_die to cover more
+ *		events.
+ */
+
+enum die_val {
+	DIE_BREAK = 1,
+	DIE_FAULT,
+	DIE_OOPS,
+	DIE_MACHINE_HALT,
+	DIE_MACHINE_RESTART,
+	DIE_MCA_MONARCH_ENTER,
+	DIE_MCA_MONARCH_PROCESS,
+	DIE_MCA_MONARCH_LEAVE,
+	DIE_MCA_SLAVE_ENTER,
+	DIE_MCA_SLAVE_PROCESS,
+	DIE_MCA_SLAVE_LEAVE,
+	DIE_MCA_RENDZVOUS_ENTER,
+	DIE_MCA_RENDZVOUS_PROCESS,
+	DIE_MCA_RENDZVOUS_LEAVE,
+	DIE_MCA_NEW_TIMEOUT,
+	DIE_INIT_ENTER,
+	DIE_INIT_MONARCH_ENTER,
+	DIE_INIT_MONARCH_PROCESS,
+	DIE_INIT_MONARCH_LEAVE,
+	DIE_INIT_SLAVE_ENTER,
+	DIE_INIT_SLAVE_PROCESS,
+	DIE_INIT_SLAVE_LEAVE,
+	DIE_KDEBUG_ENTER,
+	DIE_KDEBUG_LEAVE,
+	DIE_KDUMP_ENTER,
+	DIE_KDUMP_LEAVE,
+};
+
+#endif
diff --git a/arch/ia64/include/asm/kexec.h b/arch/ia64/include/asm/kexec.h
new file mode 100644
index 00000000000..e1d58f819d7
--- /dev/null
+++ b/arch/ia64/include/asm/kexec.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_IA64_KEXEC_H
+#define _ASM_IA64_KEXEC_H
+
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_PAGE_SIZE (8192 + 8192 + 4096)
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_IA_64
+
+#define kexec_flush_icache_page(page) do { \
+                unsigned long page_addr = (unsigned long)page_address(page); \
+                flush_icache_range(page_addr, page_addr + PAGE_SIZE); \
+        } while(0)
+
+extern struct kimage *ia64_kimage;
+extern const unsigned int relocate_new_kernel_size;
+extern void relocate_new_kernel(unsigned long, unsigned long,
+		struct ia64_boot_param *, unsigned long);
+static inline void
+crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs)
+{
+}
+extern struct resource efi_memmap_res;
+extern struct resource boot_param_res;
+extern void kdump_smp_send_stop(void);
+extern void kdump_smp_send_init(void);
+extern void kexec_disable_iosapic(void);
+extern void crash_save_this_cpu(void);
+struct rsvd_region;
+extern unsigned long kdump_find_rsvd_region(unsigned long size,
+		struct rsvd_region *rsvd_regions, int n);
+extern void kdump_cpu_freeze(struct unw_frame_info *info, void *arg);
+extern int kdump_status[];
+extern atomic_t kdump_cpu_freezed;
+extern atomic_t kdump_in_progress;
+
+#endif /* _ASM_IA64_KEXEC_H */
diff --git a/arch/ia64/include/asm/kmap_types.h b/arch/ia64/include/asm/kmap_types.h
new file mode 100644
index 00000000000..5d1658aa2b3
--- /dev/null
+++ b/arch/ia64/include/asm/kmap_types.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_IA64_KMAP_TYPES_H
+#define _ASM_IA64_KMAP_TYPES_H
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* _ASM_IA64_KMAP_TYPES_H */
diff --git a/arch/ia64/include/asm/kprobes.h b/arch/ia64/include/asm/kprobes.h
new file mode 100644
index 00000000000..dbf83fb28db
--- /dev/null
+++ b/arch/ia64/include/asm/kprobes.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ * Copyright (C) Intel Corporation, 2005
+ *
+ * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
+ *              <anil.s.keshavamurthy@intel.com> adapted from i386
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+#include <asm/break.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE   2	/* last half is for kprobe-booster */
+#define BREAK_INST	(long)(__IA64_BREAK_KPROBE << 6)
+#define NOP_M_INST	(long)(1<<27)
+#define BRL_INST(i1, i2) ((long)((0xcL << 37) |	/* brl */ \
+				(0x1L << 12) |	/* many */ \
+				(((i1) & 1) << 36) | ((i2) << 13))) /* imm */
+
+typedef union cmp_inst {
+	struct {
+	unsigned long long qp : 6;
+	unsigned long long p1 : 6;
+	unsigned long long c  : 1;
+	unsigned long long r2 : 7;
+	unsigned long long r3 : 7;
+	unsigned long long p2 : 6;
+	unsigned long long ta : 1;
+	unsigned long long x2 : 2;
+	unsigned long long tb : 1;
+	unsigned long long opcode : 4;
+	unsigned long long reserved : 23;
+	}f;
+	unsigned long long l;
+} cmp_inst_t;
+
+struct kprobe;
+
+typedef struct _bundle {
+	struct {
+		unsigned long long template : 5;
+		unsigned long long slot0 : 41;
+		unsigned long long slot1_p0 : 64-46;
+	} quad0;
+	struct {
+		unsigned long long slot1_p1 : 41 - (64-46);
+		unsigned long long slot2 : 41;
+	} quad1;
+} __attribute__((__aligned__(16)))  bundle_t;
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+};
+
+#define	MAX_PARAM_RSE_SIZE	(0x60+0x60/0x3f)
+/* per-cpu kprobe control block */
+#define ARCH_PREV_KPROBE_SZ 2
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	struct pt_regs jprobe_saved_regs;
+	unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE];
+	unsigned long *bsp;
+	unsigned long cfm;
+	atomic_t prev_kprobe_index;
+	struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
+};
+
+#define kretprobe_blacklist_size 0
+
+#define SLOT0_OPCODE_SHIFT	(37)
+#define SLOT1_p1_OPCODE_SHIFT	(37 - (64-46))
+#define SLOT2_OPCODE_SHIFT 	(37)
+
+#define INDIRECT_CALL_OPCODE		(1)
+#define IP_RELATIVE_CALL_OPCODE		(5)
+#define IP_RELATIVE_BRANCH_OPCODE	(4)
+#define IP_RELATIVE_PREDICT_OPCODE	(7)
+#define LONG_BRANCH_OPCODE		(0xC)
+#define LONG_CALL_OPCODE		(0xD)
+#define flush_insn_slot(p)		do { } while (0)
+
+typedef struct kprobe_opcode {
+	bundle_t bundle;
+} kprobe_opcode_t;
+
+struct fnptr {
+	unsigned long ip;
+	unsigned long gp;
+};
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the instruction to be emulated */
+	kprobe_opcode_t *insn;
+ #define INST_FLAG_FIX_RELATIVE_IP_ADDR		1
+ #define INST_FLAG_FIX_BRANCH_REG		2
+ #define INST_FLAG_BREAK_INST			4
+ #define INST_FLAG_BOOSTABLE			8
+ 	unsigned long inst_flag;
+ 	unsigned short target_br_reg;
+	unsigned short slot;
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+
+extern void invalidate_stacked_regs(void);
+extern void flush_register_stack(void);
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif				/* _ASM_KPROBES_H */
diff --git a/arch/ia64/include/asm/kregs.h b/arch/ia64/include/asm/kregs.h
new file mode 100644
index 00000000000..aefcdfee7f2
--- /dev/null
+++ b/arch/ia64/include/asm/kregs.h
@@ -0,0 +1,165 @@
+#ifndef _ASM_IA64_KREGS_H
+#define _ASM_IA64_KREGS_H
+
+/*
+ * Copyright (C) 2001-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * This file defines the kernel register usage convention used by Linux/ia64.
+ */
+
+/*
+ * Kernel registers:
+ */
+#define IA64_KR_IO_BASE		0	/* ar.k0: legacy I/O base address */
+#define IA64_KR_TSSD		1	/* ar.k1: IVE uses this as the TSSD */
+#define IA64_KR_PER_CPU_DATA	3	/* ar.k3: physical per-CPU base */
+#define IA64_KR_CURRENT_STACK	4	/* ar.k4: what's mapped in IA64_TR_CURRENT_STACK */
+#define IA64_KR_FPU_OWNER	5	/* ar.k5: fpu-owner (UP only, at the moment) */
+#define IA64_KR_CURRENT		6	/* ar.k6: "current" task pointer */
+#define IA64_KR_PT_BASE		7	/* ar.k7: page table base address (physical) */
+
+#define _IA64_KR_PASTE(x,y)	x##y
+#define _IA64_KR_PREFIX(n)	_IA64_KR_PASTE(ar.k, n)
+#define IA64_KR(n)		_IA64_KR_PREFIX(IA64_KR_##n)
+
+/*
+ * Translation registers:
+ */
+#define IA64_TR_KERNEL		0	/* itr0, dtr0: maps kernel image (code & data) */
+#define IA64_TR_PALCODE		1	/* itr1: maps PALcode as required by EFI */
+#define IA64_TR_CURRENT_STACK	1	/* dtr1: maps kernel's memory- & register-stacks */
+
+#define IA64_TR_ALLOC_BASE	2 	/* itr&dtr: Base of dynamic TR resource*/
+#define IA64_TR_ALLOC_MAX	32 	/* Max number for dynamic use*/
+
+/* Processor status register bits: */
+#define IA64_PSR_BE_BIT		1
+#define IA64_PSR_UP_BIT		2
+#define IA64_PSR_AC_BIT		3
+#define IA64_PSR_MFL_BIT	4
+#define IA64_PSR_MFH_BIT	5
+#define IA64_PSR_IC_BIT		13
+#define IA64_PSR_I_BIT		14
+#define IA64_PSR_PK_BIT		15
+#define IA64_PSR_DT_BIT		17
+#define IA64_PSR_DFL_BIT	18
+#define IA64_PSR_DFH_BIT	19
+#define IA64_PSR_SP_BIT		20
+#define IA64_PSR_PP_BIT		21
+#define IA64_PSR_DI_BIT		22
+#define IA64_PSR_SI_BIT		23
+#define IA64_PSR_DB_BIT		24
+#define IA64_PSR_LP_BIT		25
+#define IA64_PSR_TB_BIT		26
+#define IA64_PSR_RT_BIT		27
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL0_BIT	32
+#define IA64_PSR_CPL1_BIT	33
+#define IA64_PSR_IS_BIT		34
+#define IA64_PSR_MC_BIT		35
+#define IA64_PSR_IT_BIT		36
+#define IA64_PSR_ID_BIT		37
+#define IA64_PSR_DA_BIT		38
+#define IA64_PSR_DD_BIT		39
+#define IA64_PSR_SS_BIT		40
+#define IA64_PSR_RI_BIT		41
+#define IA64_PSR_ED_BIT		43
+#define IA64_PSR_BN_BIT		44
+#define IA64_PSR_IA_BIT		45
+
+/* A mask of PSR bits that we generally don't want to inherit across a clone2() or an
+   execve().  Only list flags here that need to be cleared/set for BOTH clone2() and
+   execve().  */
+#define IA64_PSR_BITS_TO_CLEAR	(IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_DB | IA64_PSR_LP | \
+				 IA64_PSR_TB  | IA64_PSR_ID  | IA64_PSR_DA | IA64_PSR_DD | \
+				 IA64_PSR_SS  | IA64_PSR_ED  | IA64_PSR_IA)
+#define IA64_PSR_BITS_TO_SET	(IA64_PSR_DFH | IA64_PSR_SP)
+
+#define IA64_PSR_BE	(__IA64_UL(1) << IA64_PSR_BE_BIT)
+#define IA64_PSR_UP	(__IA64_UL(1) << IA64_PSR_UP_BIT)
+#define IA64_PSR_AC	(__IA64_UL(1) << IA64_PSR_AC_BIT)
+#define IA64_PSR_MFL	(__IA64_UL(1) << IA64_PSR_MFL_BIT)
+#define IA64_PSR_MFH	(__IA64_UL(1) << IA64_PSR_MFH_BIT)
+#define IA64_PSR_IC	(__IA64_UL(1) << IA64_PSR_IC_BIT)
+#define IA64_PSR_I	(__IA64_UL(1) << IA64_PSR_I_BIT)
+#define IA64_PSR_PK	(__IA64_UL(1) << IA64_PSR_PK_BIT)
+#define IA64_PSR_DT	(__IA64_UL(1) << IA64_PSR_DT_BIT)
+#define IA64_PSR_DFL	(__IA64_UL(1) << IA64_PSR_DFL_BIT)
+#define IA64_PSR_DFH	(__IA64_UL(1) << IA64_PSR_DFH_BIT)
+#define IA64_PSR_SP	(__IA64_UL(1) << IA64_PSR_SP_BIT)
+#define IA64_PSR_PP	(__IA64_UL(1) << IA64_PSR_PP_BIT)
+#define IA64_PSR_DI	(__IA64_UL(1) << IA64_PSR_DI_BIT)
+#define IA64_PSR_SI	(__IA64_UL(1) << IA64_PSR_SI_BIT)
+#define IA64_PSR_DB	(__IA64_UL(1) << IA64_PSR_DB_BIT)
+#define IA64_PSR_LP	(__IA64_UL(1) << IA64_PSR_LP_BIT)
+#define IA64_PSR_TB	(__IA64_UL(1) << IA64_PSR_TB_BIT)
+#define IA64_PSR_RT	(__IA64_UL(1) << IA64_PSR_RT_BIT)
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL	(__IA64_UL(3) << IA64_PSR_CPL0_BIT)
+#define IA64_PSR_IS	(__IA64_UL(1) << IA64_PSR_IS_BIT)
+#define IA64_PSR_MC	(__IA64_UL(1) << IA64_PSR_MC_BIT)
+#define IA64_PSR_IT	(__IA64_UL(1) << IA64_PSR_IT_BIT)
+#define IA64_PSR_ID	(__IA64_UL(1) << IA64_PSR_ID_BIT)
+#define IA64_PSR_DA	(__IA64_UL(1) << IA64_PSR_DA_BIT)
+#define IA64_PSR_DD	(__IA64_UL(1) << IA64_PSR_DD_BIT)
+#define IA64_PSR_SS	(__IA64_UL(1) << IA64_PSR_SS_BIT)
+#define IA64_PSR_RI	(__IA64_UL(3) << IA64_PSR_RI_BIT)
+#define IA64_PSR_ED	(__IA64_UL(1) << IA64_PSR_ED_BIT)
+#define IA64_PSR_BN	(__IA64_UL(1) << IA64_PSR_BN_BIT)
+#define IA64_PSR_IA	(__IA64_UL(1) << IA64_PSR_IA_BIT)
+
+/* User mask bits: */
+#define IA64_PSR_UM	(IA64_PSR_BE | IA64_PSR_UP | IA64_PSR_AC | IA64_PSR_MFL | IA64_PSR_MFH)
+
+/* Default Control Register */
+#define IA64_DCR_PP_BIT		 0	/* privileged performance monitor default */
+#define IA64_DCR_BE_BIT		 1	/* big-endian default */
+#define IA64_DCR_LC_BIT		 2	/* ia32 lock-check enable */
+#define IA64_DCR_DM_BIT		 8	/* defer TLB miss faults */
+#define IA64_DCR_DP_BIT		 9	/* defer page-not-present faults */
+#define IA64_DCR_DK_BIT		10	/* defer key miss faults */
+#define IA64_DCR_DX_BIT		11	/* defer key permission faults */
+#define IA64_DCR_DR_BIT		12	/* defer access right faults */
+#define IA64_DCR_DA_BIT		13	/* defer access bit faults */
+#define IA64_DCR_DD_BIT		14	/* defer debug faults */
+
+#define IA64_DCR_PP	(__IA64_UL(1) << IA64_DCR_PP_BIT)
+#define IA64_DCR_BE	(__IA64_UL(1) << IA64_DCR_BE_BIT)
+#define IA64_DCR_LC	(__IA64_UL(1) << IA64_DCR_LC_BIT)
+#define IA64_DCR_DM	(__IA64_UL(1) << IA64_DCR_DM_BIT)
+#define IA64_DCR_DP	(__IA64_UL(1) << IA64_DCR_DP_BIT)
+#define IA64_DCR_DK	(__IA64_UL(1) << IA64_DCR_DK_BIT)
+#define IA64_DCR_DX	(__IA64_UL(1) << IA64_DCR_DX_BIT)
+#define IA64_DCR_DR	(__IA64_UL(1) << IA64_DCR_DR_BIT)
+#define IA64_DCR_DA	(__IA64_UL(1) << IA64_DCR_DA_BIT)
+#define IA64_DCR_DD	(__IA64_UL(1) << IA64_DCR_DD_BIT)
+
+/* Interrupt Status Register */
+#define IA64_ISR_X_BIT		32	/* execute access */
+#define IA64_ISR_W_BIT		33	/* write access */
+#define IA64_ISR_R_BIT		34	/* read access */
+#define IA64_ISR_NA_BIT		35	/* non-access */
+#define IA64_ISR_SP_BIT		36	/* speculative load exception */
+#define IA64_ISR_RS_BIT		37	/* mandatory register-stack exception */
+#define IA64_ISR_IR_BIT		38	/* invalid register frame exception */
+#define IA64_ISR_CODE_MASK	0xf
+
+#define IA64_ISR_X	(__IA64_UL(1) << IA64_ISR_X_BIT)
+#define IA64_ISR_W	(__IA64_UL(1) << IA64_ISR_W_BIT)
+#define IA64_ISR_R	(__IA64_UL(1) << IA64_ISR_R_BIT)
+#define IA64_ISR_NA	(__IA64_UL(1) << IA64_ISR_NA_BIT)
+#define IA64_ISR_SP	(__IA64_UL(1) << IA64_ISR_SP_BIT)
+#define IA64_ISR_RS	(__IA64_UL(1) << IA64_ISR_RS_BIT)
+#define IA64_ISR_IR	(__IA64_UL(1) << IA64_ISR_IR_BIT)
+
+/* ISR code field for non-access instructions */
+#define IA64_ISR_CODE_TPA	0
+#define IA64_ISR_CODE_FC	1
+#define IA64_ISR_CODE_PROBE	2
+#define IA64_ISR_CODE_TAK	3
+#define IA64_ISR_CODE_LFETCH	4
+#define IA64_ISR_CODE_PROBEF	5
+
+#endif /* _ASM_IA64_kREGS_H */
diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
new file mode 100644
index 00000000000..f38472ac226
--- /dev/null
+++ b/arch/ia64/include/asm/kvm.h
@@ -0,0 +1,211 @@
+#ifndef __ASM_IA64_KVM_H
+#define __ASM_IA64_KVM_H
+
+/*
+ * kvm structure definitions  for ia64
+ *
+ * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <asm/types.h>
+
+#include <linux/ioctl.h>
+
+/* Architectural interrupt line count. */
+#define KVM_NR_INTERRUPTS 256
+
+#define KVM_IOAPIC_NUM_PINS  48
+
+struct kvm_ioapic_state {
+	__u64 base_address;
+	__u32 ioregsel;
+	__u32 id;
+	__u32 irr;
+	__u32 pad;
+	union {
+		__u64 bits;
+		struct {
+			__u8 vector;
+			__u8 delivery_mode:3;
+			__u8 dest_mode:1;
+			__u8 delivery_status:1;
+			__u8 polarity:1;
+			__u8 remote_irr:1;
+			__u8 trig_mode:1;
+			__u8 mask:1;
+			__u8 reserve:7;
+			__u8 reserved[4];
+			__u8 dest_id;
+		} fields;
+	} redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER   0
+#define KVM_IRQCHIP_PIC_SLAVE    1
+#define KVM_IRQCHIP_IOAPIC       2
+
+#define KVM_CONTEXT_SIZE	8*1024
+
+struct kvm_fpreg {
+	union {
+		unsigned long bits[2];
+		long double __dummy;	/* force 16-byte alignment */
+	} u;
+};
+
+union context {
+	/* 8K size */
+	char	dummy[KVM_CONTEXT_SIZE];
+	struct {
+		unsigned long       psr;
+		unsigned long       pr;
+		unsigned long       caller_unat;
+		unsigned long       pad;
+		unsigned long       gr[32];
+		unsigned long       ar[128];
+		unsigned long       br[8];
+		unsigned long       cr[128];
+		unsigned long       rr[8];
+		unsigned long       ibr[8];
+		unsigned long       dbr[8];
+		unsigned long       pkr[8];
+		struct kvm_fpreg   fr[128];
+	};
+};
+
+struct thash_data {
+	union {
+		struct {
+			unsigned long p    :  1; /* 0 */
+			unsigned long rv1  :  1; /* 1 */
+			unsigned long ma   :  3; /* 2-4 */
+			unsigned long a    :  1; /* 5 */
+			unsigned long d    :  1; /* 6 */
+			unsigned long pl   :  2; /* 7-8 */
+			unsigned long ar   :  3; /* 9-11 */
+			unsigned long ppn  : 38; /* 12-49 */
+			unsigned long rv2  :  2; /* 50-51 */
+			unsigned long ed   :  1; /* 52 */
+			unsigned long ig1  : 11; /* 53-63 */
+		};
+		struct {
+			unsigned long __rv1 : 53;     /* 0-52 */
+			unsigned long contiguous : 1; /*53 */
+			unsigned long tc : 1;         /* 54 TR or TC */
+			unsigned long cl : 1;
+			/* 55 I side or D side cache line */
+			unsigned long len  :  4;      /* 56-59 */
+			unsigned long io  : 1;	/* 60 entry is for io or not */
+			unsigned long nomap : 1;
+			/* 61 entry cann't be inserted into machine TLB.*/
+			unsigned long checked : 1;
+			/* 62 for VTLB/VHPT sanity check */
+			unsigned long invalid : 1;
+			/* 63 invalid entry */
+		};
+		unsigned long page_flags;
+	};                  /* same for VHPT and TLB */
+
+	union {
+		struct {
+			unsigned long rv3  :  2;
+			unsigned long ps   :  6;
+			unsigned long key  : 24;
+			unsigned long rv4  : 32;
+		};
+		unsigned long itir;
+	};
+	union {
+		struct {
+			unsigned long ig2  :  12;
+			unsigned long vpn  :  49;
+			unsigned long vrn  :   3;
+		};
+		unsigned long ifa;
+		unsigned long vadr;
+		struct {
+			unsigned long tag  :  63;
+			unsigned long ti   :  1;
+		};
+		unsigned long etag;
+	};
+	union {
+		struct thash_data *next;
+		unsigned long rid;
+		unsigned long gpaddr;
+	};
+};
+
+#define	NITRS	8
+#define NDTRS	8
+
+struct saved_vpd {
+	unsigned long  vhpi;
+	unsigned long  vgr[16];
+	unsigned long  vbgr[16];
+	unsigned long  vnat;
+	unsigned long  vbnat;
+	unsigned long  vcpuid[5];
+	unsigned long  vpsr;
+	unsigned long  vpr;
+	unsigned long  vcr[128];
+};
+
+struct kvm_regs {
+	char *saved_guest;
+	char *saved_stack;
+	struct saved_vpd vpd;
+	/*Arch-regs*/
+	int mp_state;
+	unsigned long vmm_rr;
+	/* TR and TC.  */
+	struct thash_data itrs[NITRS];
+	struct thash_data dtrs[NDTRS];
+	/* Bit is set if there is a tr/tc for the region.  */
+	unsigned char itr_regions;
+	unsigned char dtr_regions;
+	unsigned char tc_regions;
+
+	char irq_check;
+	unsigned long saved_itc;
+	unsigned long itc_check;
+	unsigned long timer_check;
+	unsigned long timer_pending;
+	unsigned long last_itc;
+
+	unsigned long vrr[8];
+	unsigned long ibr[8];
+	unsigned long dbr[8];
+	unsigned long insvc[4];		/* Interrupt in service.  */
+	unsigned long xtp;
+
+	unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_rr4;	/* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_saved_rr0; /* from kvm_arch          */
+	unsigned long metaphysical_saved_rr4; /* from kvm_arch          */
+	unsigned long fp_psr;       /*used for lazy float register */
+	unsigned long saved_gp;
+	/*for phycial  emulation */
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+};
+
+#endif
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
new file mode 100644
index 00000000000..1efe513a994
--- /dev/null
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -0,0 +1,527 @@
+/*
+ * kvm_host.h: used for kvm module, and hold ia64-specific sections.
+ *
+ * Copyright (C) 2007, Intel Corporation.
+ *
+ * Xiantao Zhang <xiantao.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#ifndef __ASM_KVM_HOST_H
+#define __ASM_KVM_HOST_H
+
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/kvm.h>
+#include <linux/kvm_para.h>
+#include <linux/kvm_types.h>
+
+#include <asm/pal.h>
+#include <asm/sal.h>
+
+#define KVM_MAX_VCPUS 4
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
+/* define exit reasons from vmm to kvm*/
+#define EXIT_REASON_VM_PANIC		0
+#define EXIT_REASON_MMIO_INSTRUCTION	1
+#define EXIT_REASON_PAL_CALL		2
+#define EXIT_REASON_SAL_CALL		3
+#define EXIT_REASON_SWITCH_RR6		4
+#define EXIT_REASON_VM_DESTROY		5
+#define EXIT_REASON_EXTERNAL_INTERRUPT	6
+#define EXIT_REASON_IPI			7
+#define EXIT_REASON_PTC_G		8
+
+/*Define vmm address space and vm data space.*/
+#define KVM_VMM_SIZE (16UL<<20)
+#define KVM_VMM_SHIFT 24
+#define KVM_VMM_BASE 0xD000000000000000UL
+#define VMM_SIZE (8UL<<20)
+
+/*
+ * Define vm_buffer, used by PAL Services, base address.
+ * Note: vmbuffer is in the VMM-BLOCK, the size must be < 8M
+ */
+#define KVM_VM_BUFFER_BASE (KVM_VMM_BASE + VMM_SIZE)
+#define KVM_VM_BUFFER_SIZE (8UL<<20)
+
+/*Define Virtual machine data layout.*/
+#define KVM_VM_DATA_SHIFT  24
+#define KVM_VM_DATA_SIZE (1UL << KVM_VM_DATA_SHIFT)
+#define KVM_VM_DATA_BASE (KVM_VMM_BASE + KVM_VMM_SIZE)
+
+
+#define KVM_P2M_BASE    KVM_VM_DATA_BASE
+#define KVM_P2M_OFS     0
+#define KVM_P2M_SIZE    (8UL << 20)
+
+#define KVM_VHPT_BASE   (KVM_P2M_BASE + KVM_P2M_SIZE)
+#define KVM_VHPT_OFS    KVM_P2M_SIZE
+#define KVM_VHPT_BLOCK_SIZE   (2UL << 20)
+#define VHPT_SHIFT      18
+#define VHPT_SIZE       (1UL << VHPT_SHIFT)
+#define VHPT_NUM_ENTRIES (1<<(VHPT_SHIFT-5))
+
+#define KVM_VTLB_BASE   (KVM_VHPT_BASE+KVM_VHPT_BLOCK_SIZE)
+#define KVM_VTLB_OFS    (KVM_VHPT_OFS+KVM_VHPT_BLOCK_SIZE)
+#define KVM_VTLB_BLOCK_SIZE   (1UL<<20)
+#define VTLB_SHIFT      17
+#define VTLB_SIZE       (1UL<<VTLB_SHIFT)
+#define VTLB_NUM_ENTRIES (1<<(VTLB_SHIFT-5))
+
+#define KVM_VPD_BASE   (KVM_VTLB_BASE+KVM_VTLB_BLOCK_SIZE)
+#define KVM_VPD_OFS    (KVM_VTLB_OFS+KVM_VTLB_BLOCK_SIZE)
+#define KVM_VPD_BLOCK_SIZE   (2UL<<20)
+#define VPD_SHIFT       16
+#define VPD_SIZE        (1UL<<VPD_SHIFT)
+
+#define KVM_VCPU_BASE   (KVM_VPD_BASE+KVM_VPD_BLOCK_SIZE)
+#define KVM_VCPU_OFS    (KVM_VPD_OFS+KVM_VPD_BLOCK_SIZE)
+#define KVM_VCPU_BLOCK_SIZE   (2UL<<20)
+#define VCPU_SHIFT 18
+#define VCPU_SIZE (1UL<<VCPU_SHIFT)
+#define MAX_VCPU_NUM KVM_VCPU_BLOCK_SIZE/VCPU_SIZE
+
+#define KVM_VM_BASE     (KVM_VCPU_BASE+KVM_VCPU_BLOCK_SIZE)
+#define KVM_VM_OFS      (KVM_VCPU_OFS+KVM_VCPU_BLOCK_SIZE)
+#define KVM_VM_BLOCK_SIZE     (1UL<<19)
+
+#define KVM_MEM_DIRTY_LOG_BASE (KVM_VM_BASE+KVM_VM_BLOCK_SIZE)
+#define KVM_MEM_DIRTY_LOG_OFS  (KVM_VM_OFS+KVM_VM_BLOCK_SIZE)
+#define KVM_MEM_DIRTY_LOG_SIZE (1UL<<19)
+
+/* Get vpd, vhpt, tlb, vcpu, base*/
+#define VPD_ADDR(n) (KVM_VPD_BASE+n*VPD_SIZE)
+#define VHPT_ADDR(n) (KVM_VHPT_BASE+n*VHPT_SIZE)
+#define VTLB_ADDR(n) (KVM_VTLB_BASE+n*VTLB_SIZE)
+#define VCPU_ADDR(n) (KVM_VCPU_BASE+n*VCPU_SIZE)
+
+/*IO section definitions*/
+#define IOREQ_READ      1
+#define IOREQ_WRITE     0
+
+#define STATE_IOREQ_NONE        0
+#define STATE_IOREQ_READY       1
+#define STATE_IOREQ_INPROCESS   2
+#define STATE_IORESP_READY      3
+
+/*Guest Physical address layout.*/
+#define GPFN_MEM        (0UL << 60) /* Guest pfn is normal mem */
+#define GPFN_FRAME_BUFFER   (1UL << 60) /* VGA framebuffer */
+#define GPFN_LOW_MMIO       (2UL << 60) /* Low MMIO range */
+#define GPFN_PIB        (3UL << 60) /* PIB base */
+#define GPFN_IOSAPIC        (4UL << 60) /* IOSAPIC base */
+#define GPFN_LEGACY_IO      (5UL << 60) /* Legacy I/O base */
+#define GPFN_GFW        (6UL << 60) /* Guest Firmware */
+#define GPFN_HIGH_MMIO      (7UL << 60) /* High MMIO range */
+
+#define GPFN_IO_MASK        (7UL << 60) /* Guest pfn is I/O type */
+#define GPFN_INV_MASK       (1UL << 63) /* Guest pfn is invalid */
+#define INVALID_MFN       (~0UL)
+#define MEM_G   (1UL << 30)
+#define MEM_M   (1UL << 20)
+#define MMIO_START       (3 * MEM_G)
+#define MMIO_SIZE        (512 * MEM_M)
+#define VGA_IO_START     0xA0000UL
+#define VGA_IO_SIZE      0x20000
+#define LEGACY_IO_START  (MMIO_START + MMIO_SIZE)
+#define LEGACY_IO_SIZE   (64 * MEM_M)
+#define IO_SAPIC_START   0xfec00000UL
+#define IO_SAPIC_SIZE    0x100000
+#define PIB_START 0xfee00000UL
+#define PIB_SIZE 0x200000
+#define GFW_START        (4 * MEM_G - 16 * MEM_M)
+#define GFW_SIZE         (16 * MEM_M)
+
+/*Deliver mode, defined for ioapic.c*/
+#define dest_Fixed IOSAPIC_FIXED
+#define dest_LowestPrio IOSAPIC_LOWEST_PRIORITY
+
+#define NMI_VECTOR      		2
+#define ExtINT_VECTOR       		0
+#define NULL_VECTOR     		(-1)
+#define IA64_SPURIOUS_INT_VECTOR    	0x0f
+
+#define VCPU_LID(v) (((u64)(v)->vcpu_id) << 24)
+
+/*
+ *Delivery mode
+ */
+#define SAPIC_DELIV_SHIFT      8
+#define SAPIC_FIXED            0x0
+#define SAPIC_LOWEST_PRIORITY  0x1
+#define SAPIC_PMI              0x2
+#define SAPIC_NMI              0x4
+#define SAPIC_INIT             0x5
+#define SAPIC_EXTINT           0x7
+
+/*
+ * vcpu->requests bit members for arch
+ */
+#define KVM_REQ_PTC_G		32
+#define KVM_REQ_RESUME		33
+
+#define KVM_PAGES_PER_HPAGE	1
+
+struct kvm;
+struct kvm_vcpu;
+struct kvm_guest_debug{
+};
+
+struct kvm_mmio_req {
+	uint64_t addr;          /*  physical address		*/
+	uint64_t size;          /*  size in bytes		*/
+	uint64_t data;          /*  data (or paddr of data)     */
+	uint8_t state:4;
+	uint8_t dir:1;          /*  1=read, 0=write             */
+};
+
+/*Pal data struct */
+struct kvm_pal_call{
+	/*In area*/
+	uint64_t gr28;
+	uint64_t gr29;
+	uint64_t gr30;
+	uint64_t gr31;
+	/*Out area*/
+	struct ia64_pal_retval ret;
+};
+
+/* Sal data structure */
+struct kvm_sal_call{
+	/*In area*/
+	uint64_t in0;
+	uint64_t in1;
+	uint64_t in2;
+	uint64_t in3;
+	uint64_t in4;
+	uint64_t in5;
+	uint64_t in6;
+	uint64_t in7;
+	struct sal_ret_values ret;
+};
+
+/*Guest change rr6*/
+struct kvm_switch_rr6 {
+	uint64_t old_rr;
+	uint64_t new_rr;
+};
+
+union ia64_ipi_a{
+	unsigned long val;
+	struct {
+		unsigned long rv  : 3;
+		unsigned long ir  : 1;
+		unsigned long eid : 8;
+		unsigned long id  : 8;
+		unsigned long ib_base : 44;
+	};
+};
+
+union ia64_ipi_d {
+	unsigned long val;
+	struct {
+		unsigned long vector : 8;
+		unsigned long dm  : 3;
+		unsigned long ig  : 53;
+	};
+};
+
+/*ipi check exit data*/
+struct kvm_ipi_data{
+	union ia64_ipi_a addr;
+	union ia64_ipi_d data;
+};
+
+/*global purge data*/
+struct kvm_ptc_g {
+	unsigned long vaddr;
+	unsigned long rr;
+	unsigned long ps;
+	struct kvm_vcpu *vcpu;
+};
+
+/*Exit control data */
+struct exit_ctl_data{
+	uint32_t exit_reason;
+	uint32_t vm_status;
+	union {
+		struct kvm_mmio_req	ioreq;
+		struct kvm_pal_call	pal_data;
+		struct kvm_sal_call	sal_data;
+		struct kvm_switch_rr6	rr_data;
+		struct kvm_ipi_data	ipi_data;
+		struct kvm_ptc_g	ptc_g_data;
+	} u;
+};
+
+union pte_flags {
+	unsigned long val;
+	struct {
+		unsigned long p    :  1; /*0      */
+		unsigned long      :  1; /* 1     */
+		unsigned long ma   :  3; /* 2-4   */
+		unsigned long a    :  1; /* 5     */
+		unsigned long d    :  1; /* 6     */
+		unsigned long pl   :  2; /* 7-8   */
+		unsigned long ar   :  3; /* 9-11  */
+		unsigned long ppn  : 38; /* 12-49 */
+		unsigned long      :  2; /* 50-51 */
+		unsigned long ed   :  1; /* 52    */
+	};
+};
+
+union ia64_pta {
+	unsigned long val;
+	struct {
+		unsigned long ve : 1;
+		unsigned long reserved0 : 1;
+		unsigned long size : 6;
+		unsigned long vf : 1;
+		unsigned long reserved1 : 6;
+		unsigned long base : 49;
+	};
+};
+
+struct thash_cb {
+	/* THASH base information */
+	struct thash_data	*hash; /* hash table pointer */
+	union ia64_pta		pta;
+	int           num;
+};
+
+struct kvm_vcpu_stat {
+};
+
+struct kvm_vcpu_arch {
+	int launched;
+	int last_exit;
+	int last_run_cpu;
+	int vmm_tr_slot;
+	int vm_tr_slot;
+
+#define KVM_MP_STATE_RUNNABLE          0
+#define KVM_MP_STATE_UNINITIALIZED     1
+#define KVM_MP_STATE_INIT_RECEIVED     2
+#define KVM_MP_STATE_HALTED            3
+	int mp_state;
+
+#define MAX_PTC_G_NUM			3
+	int ptc_g_count;
+	struct kvm_ptc_g ptc_g_data[MAX_PTC_G_NUM];
+
+	/*halt timer to wake up sleepy vcpus*/
+	struct hrtimer hlt_timer;
+	long ht_active;
+
+	struct kvm_lapic *apic;    /* kernel irqchip context */
+	struct vpd *vpd;
+
+	/* Exit data for vmm_transition*/
+	struct exit_ctl_data exit_data;
+
+	cpumask_t cache_coherent_map;
+
+	unsigned long vmm_rr;
+	unsigned long host_rr6;
+	unsigned long psbits[8];
+	unsigned long cr_iipa;
+	unsigned long cr_isr;
+	unsigned long vsa_base;
+	unsigned long dirty_log_lock_pa;
+	unsigned long __gp;
+	/* TR and TC.  */
+	struct thash_data itrs[NITRS];
+	struct thash_data dtrs[NDTRS];
+	/* Bit is set if there is a tr/tc for the region.  */
+	unsigned char itr_regions;
+	unsigned char dtr_regions;
+	unsigned char tc_regions;
+	/* purge all */
+	unsigned long ptce_base;
+	unsigned long ptce_count[2];
+	unsigned long ptce_stride[2];
+	/* itc/itm */
+	unsigned long last_itc;
+	long itc_offset;
+	unsigned long itc_check;
+	unsigned long timer_check;
+	unsigned long timer_pending;
+
+	unsigned long vrr[8];
+	unsigned long ibr[8];
+	unsigned long dbr[8];
+	unsigned long insvc[4];		/* Interrupt in service.  */
+	unsigned long xtp;
+
+	unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_rr4;	/* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_saved_rr0; /* from kvm_arch          */
+	unsigned long metaphysical_saved_rr4; /* from kvm_arch          */
+	unsigned long fp_psr;       /*used for lazy float register */
+	unsigned long saved_gp;
+	/*for phycial  emulation */
+	int mode_flags;
+	struct thash_cb vtlb;
+	struct thash_cb vhpt;
+	char irq_check;
+	char irq_new_pending;
+
+	unsigned long opcode;
+	unsigned long cause;
+	union context host;
+	union context guest;
+};
+
+struct kvm_vm_stat {
+	u64 remote_tlb_flush;
+};
+
+struct kvm_sal_data {
+	unsigned long boot_ip;
+	unsigned long boot_gp;
+};
+
+struct kvm_arch {
+	unsigned long	vm_base;
+	unsigned long	metaphysical_rr0;
+	unsigned long	metaphysical_rr4;
+	unsigned long	vmm_init_rr;
+	unsigned long	vhpt_base;
+	unsigned long	vtlb_base;
+	unsigned long 	vpd_base;
+	spinlock_t dirty_log_lock;
+	struct kvm_ioapic *vioapic;
+	struct kvm_vm_stat stat;
+	struct kvm_sal_data rdv_sal_data;
+};
+
+union cpuid3_t {
+	u64 value;
+	struct {
+		u64 number : 8;
+		u64 revision : 8;
+		u64 model : 8;
+		u64 family : 8;
+		u64 archrev : 8;
+		u64 rv : 24;
+	};
+};
+
+struct kvm_pt_regs {
+	/* The following registers are saved by SAVE_MIN: */
+	unsigned long b6;  /* scratch */
+	unsigned long b7;  /* scratch */
+
+	unsigned long ar_csd; /* used by cmp8xchg16 (scratch) */
+	unsigned long ar_ssd; /* reserved for future use (scratch) */
+
+	unsigned long r8;  /* scratch (return value register 0) */
+	unsigned long r9;  /* scratch (return value register 1) */
+	unsigned long r10; /* scratch (return value register 2) */
+	unsigned long r11; /* scratch (return value register 3) */
+
+	unsigned long cr_ipsr; /* interrupted task's psr */
+	unsigned long cr_iip;  /* interrupted task's instruction pointer */
+	unsigned long cr_ifs;  /* interrupted task's function state */
+
+	unsigned long ar_unat; /* interrupted task's NaT register (preserved) */
+	unsigned long ar_pfs;  /* prev function state  */
+	unsigned long ar_rsc;  /* RSE configuration */
+	/* The following two are valid only if cr_ipsr.cpl > 0: */
+	unsigned long ar_rnat;  /* RSE NaT */
+	unsigned long ar_bspstore; /* RSE bspstore */
+
+	unsigned long pr;  /* 64 predicate registers (1 bit each) */
+	unsigned long b0;  /* return pointer (bp) */
+	unsigned long loadrs;  /* size of dirty partition << 16 */
+
+	unsigned long r1;  /* the gp pointer */
+	unsigned long r12; /* interrupted task's memory stack pointer */
+	unsigned long r13; /* thread pointer */
+
+	unsigned long ar_fpsr;  /* floating point status (preserved) */
+	unsigned long r15;  /* scratch */
+
+	/* The remaining registers are NOT saved for system calls.  */
+	unsigned long r14;  /* scratch */
+	unsigned long r2;  /* scratch */
+	unsigned long r3;  /* scratch */
+	unsigned long r16;  /* scratch */
+	unsigned long r17;  /* scratch */
+	unsigned long r18;  /* scratch */
+	unsigned long r19;  /* scratch */
+	unsigned long r20;  /* scratch */
+	unsigned long r21;  /* scratch */
+	unsigned long r22;  /* scratch */
+	unsigned long r23;  /* scratch */
+	unsigned long r24;  /* scratch */
+	unsigned long r25;  /* scratch */
+	unsigned long r26;  /* scratch */
+	unsigned long r27;  /* scratch */
+	unsigned long r28;  /* scratch */
+	unsigned long r29;  /* scratch */
+	unsigned long r30;  /* scratch */
+	unsigned long r31;  /* scratch */
+	unsigned long ar_ccv;  /* compare/exchange value (scratch) */
+
+	/*
+	 * Floating point registers that the kernel considers scratch:
+	 */
+	struct ia64_fpreg f6;  /* scratch */
+	struct ia64_fpreg f7;  /* scratch */
+	struct ia64_fpreg f8;  /* scratch */
+	struct ia64_fpreg f9;  /* scratch */
+	struct ia64_fpreg f10;  /* scratch */
+	struct ia64_fpreg f11;  /* scratch */
+
+	unsigned long r4;  /* preserved */
+	unsigned long r5;  /* preserved */
+	unsigned long r6;  /* preserved */
+	unsigned long r7;  /* preserved */
+	unsigned long eml_unat;    /* used for emulating instruction */
+	unsigned long pad0;     /* alignment pad */
+};
+
+static inline struct kvm_pt_regs *vcpu_regs(struct kvm_vcpu *v)
+{
+	return (struct kvm_pt_regs *) ((unsigned long) v + IA64_STK_OFFSET) - 1;
+}
+
+typedef int kvm_vmm_entry(void);
+typedef void kvm_tramp_entry(union context *host, union context *guest);
+
+struct kvm_vmm_info{
+	struct module	*module;
+	kvm_vmm_entry 	*vmm_entry;
+	kvm_tramp_entry *tramp_entry;
+	unsigned long 	vmm_ivt;
+};
+
+int kvm_highest_pending_irq(struct kvm_vcpu *vcpu);
+int kvm_emulate_halt(struct kvm_vcpu *vcpu);
+int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
+void kvm_sal_emul(struct kvm_vcpu *vcpu);
+
+static inline void kvm_inject_nmi(struct kvm_vcpu *vcpu) {}
+
+#endif
diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
new file mode 100644
index 00000000000..0d6d8ca07b8
--- /dev/null
+++ b/arch/ia64/include/asm/kvm_para.h
@@ -0,0 +1,27 @@
+#ifndef __IA64_KVM_PARA_H
+#define __IA64_KVM_PARA_H
+
+/*
+ * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/ia64/include/asm/libata-portmap.h b/arch/ia64/include/asm/libata-portmap.h
new file mode 100644
index 00000000000..0e00c9a9f41
--- /dev/null
+++ b/arch/ia64/include/asm/libata-portmap.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_IA64_LIBATA_PORTMAP_H
+#define __ASM_IA64_LIBATA_PORTMAP_H
+
+#define ATA_PRIMARY_CMD		0x1F0
+#define ATA_PRIMARY_CTL		0x3F6
+#define ATA_PRIMARY_IRQ(dev)	isa_irq_to_vector(14)
+
+#define ATA_SECONDARY_CMD	0x170
+#define ATA_SECONDARY_CTL	0x376
+#define ATA_SECONDARY_IRQ(dev)	isa_irq_to_vector(15)
+
+#endif
diff --git a/arch/ia64/include/asm/linkage.h b/arch/ia64/include/asm/linkage.h
new file mode 100644
index 00000000000..ef22a45c189
--- /dev/null
+++ b/arch/ia64/include/asm/linkage.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#ifndef __ASSEMBLY__
+
+#define asmlinkage CPP_ASMLINKAGE __attribute__((syscall_linkage))
+
+#else
+
+#include <asm/asmmacro.h>
+
+#endif
+
+#endif
diff --git a/arch/ia64/include/asm/local.h b/arch/ia64/include/asm/local.h
new file mode 100644
index 00000000000..c11c530f74d
--- /dev/null
+++ b/arch/ia64/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
new file mode 100644
index 00000000000..2b850ccafef
--- /dev/null
+++ b/arch/ia64/include/asm/machvec.h
@@ -0,0 +1,460 @@
+/*
+ * Machine vector for IA-64.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_MACHVEC_H
+#define _ASM_IA64_MACHVEC_H
+
+#include <linux/types.h>
+
+/* forward declarations: */
+struct device;
+struct pt_regs;
+struct scatterlist;
+struct page;
+struct mm_struct;
+struct pci_bus;
+struct task_struct;
+struct pci_dev;
+struct msi_desc;
+struct dma_attrs;
+
+typedef void ia64_mv_setup_t (char **);
+typedef void ia64_mv_cpu_init_t (void);
+typedef void ia64_mv_irq_init_t (void);
+typedef void ia64_mv_send_ipi_t (int, int, int, int);
+typedef void ia64_mv_timer_interrupt_t (int, void *);
+typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long);
+typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *);
+typedef u8 ia64_mv_irq_to_vector (int);
+typedef unsigned int ia64_mv_local_vector_to_irq (u8);
+typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *);
+typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val,
+				       u8 size);
+typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val,
+					u8 size);
+typedef void ia64_mv_migrate_t(struct task_struct * task);
+typedef void ia64_mv_pci_fixup_bus_t (struct pci_bus *);
+typedef void ia64_mv_kernel_launch_event_t(void);
+
+/* DMA-mapping interface: */
+typedef void ia64_mv_dma_init (void);
+typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, gfp_t);
+typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t);
+typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int);
+typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int);
+typedef int ia64_mv_dma_map_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_unmap_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int);
+typedef int ia64_mv_dma_mapping_error(struct device *, dma_addr_t dma_addr);
+typedef int ia64_mv_dma_supported (struct device *, u64);
+
+typedef dma_addr_t ia64_mv_dma_map_single_attrs (struct device *, void *, size_t, int, struct dma_attrs *);
+typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *);
+typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
+typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
+
+/*
+ * WARNING: The legacy I/O space is _architected_.  Platforms are
+ * expected to follow this architected model (see Section 10.7 in the
+ * IA-64 Architecture Software Developer's Manual).  Unfortunately,
+ * some broken machines do not follow that model, which is why we have
+ * to make the inX/outX operations part of the machine vector.
+ * Platform designers should follow the architected model whenever
+ * possible.
+ */
+typedef unsigned int ia64_mv_inb_t (unsigned long);
+typedef unsigned int ia64_mv_inw_t (unsigned long);
+typedef unsigned int ia64_mv_inl_t (unsigned long);
+typedef void ia64_mv_outb_t (unsigned char, unsigned long);
+typedef void ia64_mv_outw_t (unsigned short, unsigned long);
+typedef void ia64_mv_outl_t (unsigned int, unsigned long);
+typedef void ia64_mv_mmiowb_t (void);
+typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *);
+typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *);
+
+typedef int ia64_mv_setup_msi_irq_t (struct pci_dev *pdev, struct msi_desc *);
+typedef void ia64_mv_teardown_msi_irq_t (unsigned int irq);
+
+static inline void
+machvec_noop (void)
+{
+}
+
+static inline void
+machvec_noop_mm (struct mm_struct *mm)
+{
+}
+
+static inline void
+machvec_noop_task (struct task_struct *task)
+{
+}
+
+static inline void
+machvec_noop_bus (struct pci_bus *bus)
+{
+}
+
+extern void machvec_setup (char **);
+extern void machvec_timer_interrupt (int, void *);
+extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int);
+extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int);
+extern void machvec_tlb_migrate_finish (struct mm_struct *);
+
+# if defined (CONFIG_IA64_HP_SIM)
+#  include <asm/machvec_hpsim.h>
+# elif defined (CONFIG_IA64_DIG)
+#  include <asm/machvec_dig.h>
+# elif defined (CONFIG_IA64_HP_ZX1)
+#  include <asm/machvec_hpzx1.h>
+# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
+#  include <asm/machvec_hpzx1_swiotlb.h>
+# elif defined (CONFIG_IA64_SGI_SN2)
+#  include <asm/machvec_sn2.h>
+# elif defined (CONFIG_IA64_SGI_UV)
+#  include <asm/machvec_uv.h>
+# elif defined (CONFIG_IA64_GENERIC)
+
+# ifdef MACHVEC_PLATFORM_HEADER
+#  include MACHVEC_PLATFORM_HEADER
+# else
+#  define platform_name		ia64_mv.name
+#  define platform_setup	ia64_mv.setup
+#  define platform_cpu_init	ia64_mv.cpu_init
+#  define platform_irq_init	ia64_mv.irq_init
+#  define platform_send_ipi	ia64_mv.send_ipi
+#  define platform_timer_interrupt	ia64_mv.timer_interrupt
+#  define platform_global_tlb_purge	ia64_mv.global_tlb_purge
+#  define platform_tlb_migrate_finish	ia64_mv.tlb_migrate_finish
+#  define platform_dma_init		ia64_mv.dma_init
+#  define platform_dma_alloc_coherent	ia64_mv.dma_alloc_coherent
+#  define platform_dma_free_coherent	ia64_mv.dma_free_coherent
+#  define platform_dma_map_single_attrs	ia64_mv.dma_map_single_attrs
+#  define platform_dma_unmap_single_attrs	ia64_mv.dma_unmap_single_attrs
+#  define platform_dma_map_sg_attrs	ia64_mv.dma_map_sg_attrs
+#  define platform_dma_unmap_sg_attrs	ia64_mv.dma_unmap_sg_attrs
+#  define platform_dma_sync_single_for_cpu ia64_mv.dma_sync_single_for_cpu
+#  define platform_dma_sync_sg_for_cpu	ia64_mv.dma_sync_sg_for_cpu
+#  define platform_dma_sync_single_for_device ia64_mv.dma_sync_single_for_device
+#  define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
+#  define platform_dma_mapping_error		ia64_mv.dma_mapping_error
+#  define platform_dma_supported	ia64_mv.dma_supported
+#  define platform_irq_to_vector	ia64_mv.irq_to_vector
+#  define platform_local_vector_to_irq	ia64_mv.local_vector_to_irq
+#  define platform_pci_get_legacy_mem	ia64_mv.pci_get_legacy_mem
+#  define platform_pci_legacy_read	ia64_mv.pci_legacy_read
+#  define platform_pci_legacy_write	ia64_mv.pci_legacy_write
+#  define platform_inb		ia64_mv.inb
+#  define platform_inw		ia64_mv.inw
+#  define platform_inl		ia64_mv.inl
+#  define platform_outb		ia64_mv.outb
+#  define platform_outw		ia64_mv.outw
+#  define platform_outl		ia64_mv.outl
+#  define platform_mmiowb	ia64_mv.mmiowb
+#  define platform_readb        ia64_mv.readb
+#  define platform_readw        ia64_mv.readw
+#  define platform_readl        ia64_mv.readl
+#  define platform_readq        ia64_mv.readq
+#  define platform_readb_relaxed        ia64_mv.readb_relaxed
+#  define platform_readw_relaxed        ia64_mv.readw_relaxed
+#  define platform_readl_relaxed        ia64_mv.readl_relaxed
+#  define platform_readq_relaxed        ia64_mv.readq_relaxed
+#  define platform_migrate		ia64_mv.migrate
+#  define platform_setup_msi_irq	ia64_mv.setup_msi_irq
+#  define platform_teardown_msi_irq	ia64_mv.teardown_msi_irq
+#  define platform_pci_fixup_bus	ia64_mv.pci_fixup_bus
+#  define platform_kernel_launch_event	ia64_mv.kernel_launch_event
+# endif
+
+/* __attribute__((__aligned__(16))) is required to make size of the
+ * structure multiple of 16 bytes.
+ * This will fillup the holes created because of section 3.3.1 in
+ * Software Conventions guide.
+ */
+struct ia64_machine_vector {
+	const char *name;
+	ia64_mv_setup_t *setup;
+	ia64_mv_cpu_init_t *cpu_init;
+	ia64_mv_irq_init_t *irq_init;
+	ia64_mv_send_ipi_t *send_ipi;
+	ia64_mv_timer_interrupt_t *timer_interrupt;
+	ia64_mv_global_tlb_purge_t *global_tlb_purge;
+	ia64_mv_tlb_migrate_finish_t *tlb_migrate_finish;
+	ia64_mv_dma_init *dma_init;
+	ia64_mv_dma_alloc_coherent *dma_alloc_coherent;
+	ia64_mv_dma_free_coherent *dma_free_coherent;
+	ia64_mv_dma_map_single_attrs *dma_map_single_attrs;
+	ia64_mv_dma_unmap_single_attrs *dma_unmap_single_attrs;
+	ia64_mv_dma_map_sg_attrs *dma_map_sg_attrs;
+	ia64_mv_dma_unmap_sg_attrs *dma_unmap_sg_attrs;
+	ia64_mv_dma_sync_single_for_cpu *dma_sync_single_for_cpu;
+	ia64_mv_dma_sync_sg_for_cpu *dma_sync_sg_for_cpu;
+	ia64_mv_dma_sync_single_for_device *dma_sync_single_for_device;
+	ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
+	ia64_mv_dma_mapping_error *dma_mapping_error;
+	ia64_mv_dma_supported *dma_supported;
+	ia64_mv_irq_to_vector *irq_to_vector;
+	ia64_mv_local_vector_to_irq *local_vector_to_irq;
+	ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
+	ia64_mv_pci_legacy_read_t *pci_legacy_read;
+	ia64_mv_pci_legacy_write_t *pci_legacy_write;
+	ia64_mv_inb_t *inb;
+	ia64_mv_inw_t *inw;
+	ia64_mv_inl_t *inl;
+	ia64_mv_outb_t *outb;
+	ia64_mv_outw_t *outw;
+	ia64_mv_outl_t *outl;
+	ia64_mv_mmiowb_t *mmiowb;
+	ia64_mv_readb_t *readb;
+	ia64_mv_readw_t *readw;
+	ia64_mv_readl_t *readl;
+	ia64_mv_readq_t *readq;
+	ia64_mv_readb_relaxed_t *readb_relaxed;
+	ia64_mv_readw_relaxed_t *readw_relaxed;
+	ia64_mv_readl_relaxed_t *readl_relaxed;
+	ia64_mv_readq_relaxed_t *readq_relaxed;
+	ia64_mv_migrate_t *migrate;
+	ia64_mv_setup_msi_irq_t *setup_msi_irq;
+	ia64_mv_teardown_msi_irq_t *teardown_msi_irq;
+	ia64_mv_pci_fixup_bus_t *pci_fixup_bus;
+	ia64_mv_kernel_launch_event_t *kernel_launch_event;
+} __attribute__((__aligned__(16))); /* align attrib? see above comment */
+
+#define MACHVEC_INIT(name)			\
+{						\
+	#name,					\
+	platform_setup,				\
+	platform_cpu_init,			\
+	platform_irq_init,			\
+	platform_send_ipi,			\
+	platform_timer_interrupt,		\
+	platform_global_tlb_purge,		\
+	platform_tlb_migrate_finish,		\
+	platform_dma_init,			\
+	platform_dma_alloc_coherent,		\
+	platform_dma_free_coherent,		\
+	platform_dma_map_single_attrs,		\
+	platform_dma_unmap_single_attrs,	\
+	platform_dma_map_sg_attrs,		\
+	platform_dma_unmap_sg_attrs,		\
+	platform_dma_sync_single_for_cpu,	\
+	platform_dma_sync_sg_for_cpu,		\
+	platform_dma_sync_single_for_device,	\
+	platform_dma_sync_sg_for_device,	\
+	platform_dma_mapping_error,			\
+	platform_dma_supported,			\
+	platform_irq_to_vector,			\
+	platform_local_vector_to_irq,		\
+	platform_pci_get_legacy_mem,		\
+	platform_pci_legacy_read,		\
+	platform_pci_legacy_write,		\
+	platform_inb,				\
+	platform_inw,				\
+	platform_inl,				\
+	platform_outb,				\
+	platform_outw,				\
+	platform_outl,				\
+	platform_mmiowb,			\
+	platform_readb,				\
+	platform_readw,				\
+	platform_readl,				\
+	platform_readq,				\
+	platform_readb_relaxed,			\
+	platform_readw_relaxed,			\
+	platform_readl_relaxed,			\
+	platform_readq_relaxed,			\
+	platform_migrate,			\
+	platform_setup_msi_irq,			\
+	platform_teardown_msi_irq,		\
+	platform_pci_fixup_bus,			\
+	platform_kernel_launch_event            \
+}
+
+extern struct ia64_machine_vector ia64_mv;
+extern void machvec_init (const char *name);
+extern void machvec_init_from_cmdline(const char *cmdline);
+
+# else
+#  error Unknown configuration.  Update arch/ia64/include/asm/machvec.h.
+# endif /* CONFIG_IA64_GENERIC */
+
+/*
+ * Declare default routines which aren't declared anywhere else:
+ */
+extern ia64_mv_dma_init			swiotlb_init;
+extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
+extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
+extern ia64_mv_dma_map_single		swiotlb_map_single;
+extern ia64_mv_dma_map_single_attrs	swiotlb_map_single_attrs;
+extern ia64_mv_dma_unmap_single		swiotlb_unmap_single;
+extern ia64_mv_dma_unmap_single_attrs	swiotlb_unmap_single_attrs;
+extern ia64_mv_dma_map_sg		swiotlb_map_sg;
+extern ia64_mv_dma_map_sg_attrs		swiotlb_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg		swiotlb_unmap_sg;
+extern ia64_mv_dma_unmap_sg_attrs	swiotlb_unmap_sg_attrs;
+extern ia64_mv_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu	swiotlb_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device	swiotlb_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error	swiotlb_dma_mapping_error;
+extern ia64_mv_dma_supported		swiotlb_dma_supported;
+
+/*
+ * Define default versions so we can extend machvec for new platforms without having
+ * to update the machvec files for all existing platforms.
+ */
+#ifndef platform_setup
+# define platform_setup			machvec_setup
+#endif
+#ifndef platform_cpu_init
+# define platform_cpu_init		machvec_noop
+#endif
+#ifndef platform_irq_init
+# define platform_irq_init		machvec_noop
+#endif
+
+#ifndef platform_send_ipi
+# define platform_send_ipi		ia64_send_ipi	/* default to architected version */
+#endif
+#ifndef platform_timer_interrupt
+# define platform_timer_interrupt 	machvec_timer_interrupt
+#endif
+#ifndef platform_global_tlb_purge
+# define platform_global_tlb_purge	ia64_global_tlb_purge /* default to architected version */
+#endif
+#ifndef platform_tlb_migrate_finish
+# define platform_tlb_migrate_finish	machvec_noop_mm
+#endif
+#ifndef platform_kernel_launch_event
+# define platform_kernel_launch_event	machvec_noop
+#endif
+#ifndef platform_dma_init
+# define platform_dma_init		swiotlb_init
+#endif
+#ifndef platform_dma_alloc_coherent
+# define platform_dma_alloc_coherent	swiotlb_alloc_coherent
+#endif
+#ifndef platform_dma_free_coherent
+# define platform_dma_free_coherent	swiotlb_free_coherent
+#endif
+#ifndef platform_dma_map_single_attrs
+# define platform_dma_map_single_attrs	swiotlb_map_single_attrs
+#endif
+#ifndef platform_dma_unmap_single_attrs
+# define platform_dma_unmap_single_attrs	swiotlb_unmap_single_attrs
+#endif
+#ifndef platform_dma_map_sg_attrs
+# define platform_dma_map_sg_attrs	swiotlb_map_sg_attrs
+#endif
+#ifndef platform_dma_unmap_sg_attrs
+# define platform_dma_unmap_sg_attrs	swiotlb_unmap_sg_attrs
+#endif
+#ifndef platform_dma_sync_single_for_cpu
+# define platform_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu
+#endif
+#ifndef platform_dma_sync_sg_for_cpu
+# define platform_dma_sync_sg_for_cpu		swiotlb_sync_sg_for_cpu
+#endif
+#ifndef platform_dma_sync_single_for_device
+# define platform_dma_sync_single_for_device	swiotlb_sync_single_for_device
+#endif
+#ifndef platform_dma_sync_sg_for_device
+# define platform_dma_sync_sg_for_device	swiotlb_sync_sg_for_device
+#endif
+#ifndef platform_dma_mapping_error
+# define platform_dma_mapping_error		swiotlb_dma_mapping_error
+#endif
+#ifndef platform_dma_supported
+# define  platform_dma_supported	swiotlb_dma_supported
+#endif
+#ifndef platform_irq_to_vector
+# define platform_irq_to_vector		__ia64_irq_to_vector
+#endif
+#ifndef platform_local_vector_to_irq
+# define platform_local_vector_to_irq	__ia64_local_vector_to_irq
+#endif
+#ifndef platform_pci_get_legacy_mem
+# define platform_pci_get_legacy_mem	ia64_pci_get_legacy_mem
+#endif
+#ifndef platform_pci_legacy_read
+# define platform_pci_legacy_read	ia64_pci_legacy_read
+extern int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size);
+#endif
+#ifndef platform_pci_legacy_write
+# define platform_pci_legacy_write	ia64_pci_legacy_write
+extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size);
+#endif
+#ifndef platform_inb
+# define platform_inb		__ia64_inb
+#endif
+#ifndef platform_inw
+# define platform_inw		__ia64_inw
+#endif
+#ifndef platform_inl
+# define platform_inl		__ia64_inl
+#endif
+#ifndef platform_outb
+# define platform_outb		__ia64_outb
+#endif
+#ifndef platform_outw
+# define platform_outw		__ia64_outw
+#endif
+#ifndef platform_outl
+# define platform_outl		__ia64_outl
+#endif
+#ifndef platform_mmiowb
+# define platform_mmiowb	__ia64_mmiowb
+#endif
+#ifndef platform_readb
+# define platform_readb		__ia64_readb
+#endif
+#ifndef platform_readw
+# define platform_readw		__ia64_readw
+#endif
+#ifndef platform_readl
+# define platform_readl		__ia64_readl
+#endif
+#ifndef platform_readq
+# define platform_readq		__ia64_readq
+#endif
+#ifndef platform_readb_relaxed
+# define platform_readb_relaxed	__ia64_readb_relaxed
+#endif
+#ifndef platform_readw_relaxed
+# define platform_readw_relaxed	__ia64_readw_relaxed
+#endif
+#ifndef platform_readl_relaxed
+# define platform_readl_relaxed	__ia64_readl_relaxed
+#endif
+#ifndef platform_readq_relaxed
+# define platform_readq_relaxed	__ia64_readq_relaxed
+#endif
+#ifndef platform_migrate
+# define platform_migrate machvec_noop_task
+#endif
+#ifndef platform_setup_msi_irq
+# define platform_setup_msi_irq		((ia64_mv_setup_msi_irq_t*)NULL)
+#endif
+#ifndef platform_teardown_msi_irq
+# define platform_teardown_msi_irq	((ia64_mv_teardown_msi_irq_t*)NULL)
+#endif
+#ifndef platform_pci_fixup_bus
+# define platform_pci_fixup_bus	machvec_noop_bus
+#endif
+
+#endif /* _ASM_IA64_MACHVEC_H */
diff --git a/arch/ia64/include/asm/machvec_dig.h b/arch/ia64/include/asm/machvec_dig.h
new file mode 100644
index 00000000000..8a0752f4098
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_dig.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_IA64_MACHVEC_DIG_h
+#define _ASM_IA64_MACHVEC_DIG_h
+
+extern ia64_mv_setup_t dig_setup;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name		"dig"
+#define platform_setup		dig_setup
+
+#endif /* _ASM_IA64_MACHVEC_DIG_h */
diff --git a/arch/ia64/include/asm/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h
new file mode 100644
index 00000000000..cf72fc87fdf
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_hpsim.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_IA64_MACHVEC_HPSIM_h
+#define _ASM_IA64_MACHVEC_HPSIM_h
+
+extern ia64_mv_setup_t hpsim_setup;
+extern ia64_mv_irq_init_t hpsim_irq_init;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name		"hpsim"
+#define platform_setup		hpsim_setup
+#define platform_irq_init	hpsim_irq_init
+
+#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
diff --git a/arch/ia64/include/asm/machvec_hpzx1.h b/arch/ia64/include/asm/machvec_hpzx1.h
new file mode 100644
index 00000000000..2f57f5144b9
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_hpzx1.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_h
+#define _ASM_IA64_MACHVEC_HPZX1_h
+
+extern ia64_mv_setup_t			dig_setup;
+extern ia64_mv_dma_alloc_coherent	sba_alloc_coherent;
+extern ia64_mv_dma_free_coherent	sba_free_coherent;
+extern ia64_mv_dma_map_single_attrs	sba_map_single_attrs;
+extern ia64_mv_dma_unmap_single_attrs	sba_unmap_single_attrs;
+extern ia64_mv_dma_map_sg_attrs		sba_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg_attrs	sba_unmap_sg_attrs;
+extern ia64_mv_dma_supported		sba_dma_supported;
+extern ia64_mv_dma_mapping_error	sba_dma_mapping_error;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"hpzx1"
+#define platform_setup				dig_setup
+#define platform_dma_init			machvec_noop
+#define platform_dma_alloc_coherent		sba_alloc_coherent
+#define platform_dma_free_coherent		sba_free_coherent
+#define platform_dma_map_single_attrs		sba_map_single_attrs
+#define platform_dma_unmap_single_attrs		sba_unmap_single_attrs
+#define platform_dma_map_sg_attrs		sba_map_sg_attrs
+#define platform_dma_unmap_sg_attrs		sba_unmap_sg_attrs
+#define platform_dma_sync_single_for_cpu	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_cpu		machvec_dma_sync_sg
+#define platform_dma_sync_single_for_device	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_device		machvec_dma_sync_sg
+#define platform_dma_supported			sba_dma_supported
+#define platform_dma_mapping_error		sba_dma_mapping_error
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
diff --git a/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
new file mode 100644
index 00000000000..a842cdda827
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+
+extern ia64_mv_setup_t				dig_setup;
+extern ia64_mv_dma_alloc_coherent		hwsw_alloc_coherent;
+extern ia64_mv_dma_free_coherent		hwsw_free_coherent;
+extern ia64_mv_dma_map_single_attrs		hwsw_map_single_attrs;
+extern ia64_mv_dma_unmap_single_attrs		hwsw_unmap_single_attrs;
+extern ia64_mv_dma_map_sg_attrs			hwsw_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg_attrs		hwsw_unmap_sg_attrs;
+extern ia64_mv_dma_supported			hwsw_dma_supported;
+extern ia64_mv_dma_mapping_error		hwsw_dma_mapping_error;
+extern ia64_mv_dma_sync_single_for_cpu		hwsw_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device	hwsw_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device		hwsw_sync_sg_for_device;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"hpzx1_swiotlb"
+
+#define platform_setup				dig_setup
+#define platform_dma_init			machvec_noop
+#define platform_dma_alloc_coherent		hwsw_alloc_coherent
+#define platform_dma_free_coherent		hwsw_free_coherent
+#define platform_dma_map_single_attrs		hwsw_map_single_attrs
+#define platform_dma_unmap_single_attrs		hwsw_unmap_single_attrs
+#define platform_dma_map_sg_attrs		hwsw_map_sg_attrs
+#define platform_dma_unmap_sg_attrs		hwsw_unmap_sg_attrs
+#define platform_dma_supported			hwsw_dma_supported
+#define platform_dma_mapping_error		hwsw_dma_mapping_error
+#define platform_dma_sync_single_for_cpu	hwsw_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device	hwsw_sync_single_for_device
+#define platform_dma_sync_sg_for_device		hwsw_sync_sg_for_device
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */
diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h
new file mode 100644
index 00000000000..7f21249fba3
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_init.h
@@ -0,0 +1,33 @@
+#include <asm/machvec.h>
+
+extern ia64_mv_send_ipi_t ia64_send_ipi;
+extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
+extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write;
+
+extern ia64_mv_inb_t __ia64_inb;
+extern ia64_mv_inw_t __ia64_inw;
+extern ia64_mv_inl_t __ia64_inl;
+extern ia64_mv_outb_t __ia64_outb;
+extern ia64_mv_outw_t __ia64_outw;
+extern ia64_mv_outl_t __ia64_outl;
+extern ia64_mv_mmiowb_t __ia64_mmiowb;
+extern ia64_mv_readb_t __ia64_readb;
+extern ia64_mv_readw_t __ia64_readw;
+extern ia64_mv_readl_t __ia64_readl;
+extern ia64_mv_readq_t __ia64_readq;
+extern ia64_mv_readb_t __ia64_readb_relaxed;
+extern ia64_mv_readw_t __ia64_readw_relaxed;
+extern ia64_mv_readl_t __ia64_readl_relaxed;
+extern ia64_mv_readq_t __ia64_readq_relaxed;
+
+#define MACHVEC_HELPER(name)									\
+ struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec")))	\
+	= MACHVEC_INIT(name);
+
+#define MACHVEC_DEFINE(name)	MACHVEC_HELPER(name)
+
+MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME)
diff --git a/arch/ia64/include/asm/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h
new file mode 100644
index 00000000000..781308ea7b8
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_sn2.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (c) 2002-2003,2006 Silicon Graphics, Inc.  All Rights Reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify it 
+ * under the terms of version 2 of the GNU General Public License 
+ * as published by the Free Software Foundation.
+ * 
+ * This program is distributed in the hope that it would be useful, but 
+ * WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
+ * 
+ * Further, this software is distributed without any warranty that it is 
+ * free of the rightful claim of any third person regarding infringement 
+ * or the like.  Any license provided herein, whether implied or 
+ * otherwise, applies only to this software file.  Patent licenses, if 
+ * any, provided herein do not apply to combinations of this program with 
+ * other software, or any other product whatsoever.
+ * 
+ * You should have received a copy of the GNU General Public 
+ * License along with this program; if not, write the Free Software 
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ * 
+ * For further information regarding this notice, see: 
+ * 
+ * http://oss.sgi.com/projects/GenInfo/NoticeExplan
+ */
+
+#ifndef _ASM_IA64_MACHVEC_SN2_H
+#define _ASM_IA64_MACHVEC_SN2_H
+
+extern ia64_mv_setup_t sn_setup;
+extern ia64_mv_cpu_init_t sn_cpu_init;
+extern ia64_mv_irq_init_t sn_irq_init;
+extern ia64_mv_send_ipi_t sn2_send_IPI;
+extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
+extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
+extern ia64_mv_tlb_migrate_finish_t	sn_tlb_migrate_finish;
+extern ia64_mv_irq_to_vector sn_irq_to_vector;
+extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
+extern ia64_mv_inb_t __sn_inb;
+extern ia64_mv_inw_t __sn_inw;
+extern ia64_mv_inl_t __sn_inl;
+extern ia64_mv_outb_t __sn_outb;
+extern ia64_mv_outw_t __sn_outw;
+extern ia64_mv_outl_t __sn_outl;
+extern ia64_mv_mmiowb_t __sn_mmiowb;
+extern ia64_mv_readb_t __sn_readb;
+extern ia64_mv_readw_t __sn_readw;
+extern ia64_mv_readl_t __sn_readl;
+extern ia64_mv_readq_t __sn_readq;
+extern ia64_mv_readb_t __sn_readb_relaxed;
+extern ia64_mv_readw_t __sn_readw_relaxed;
+extern ia64_mv_readl_t __sn_readl_relaxed;
+extern ia64_mv_readq_t __sn_readq_relaxed;
+extern ia64_mv_dma_alloc_coherent	sn_dma_alloc_coherent;
+extern ia64_mv_dma_free_coherent	sn_dma_free_coherent;
+extern ia64_mv_dma_map_single_attrs	sn_dma_map_single_attrs;
+extern ia64_mv_dma_unmap_single_attrs	sn_dma_unmap_single_attrs;
+extern ia64_mv_dma_map_sg_attrs		sn_dma_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg_attrs	sn_dma_unmap_sg_attrs;
+extern ia64_mv_dma_sync_single_for_cpu	sn_dma_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device	sn_dma_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error	sn_dma_mapping_error;
+extern ia64_mv_dma_supported		sn_dma_supported;
+extern ia64_mv_migrate_t		sn_migrate;
+extern ia64_mv_kernel_launch_event_t	sn_kernel_launch_event;
+extern ia64_mv_setup_msi_irq_t		sn_setup_msi_irq;
+extern ia64_mv_teardown_msi_irq_t	sn_teardown_msi_irq;
+extern ia64_mv_pci_fixup_bus_t		sn_pci_fixup_bus;
+
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name			"sn2"
+#define platform_setup			sn_setup
+#define platform_cpu_init		sn_cpu_init
+#define platform_irq_init		sn_irq_init
+#define platform_send_ipi		sn2_send_IPI
+#define platform_timer_interrupt	sn_timer_interrupt
+#define platform_global_tlb_purge       sn2_global_tlb_purge
+#define platform_tlb_migrate_finish	sn_tlb_migrate_finish
+#define platform_pci_fixup		sn_pci_fixup
+#define platform_inb			__sn_inb
+#define platform_inw			__sn_inw
+#define platform_inl			__sn_inl
+#define platform_outb			__sn_outb
+#define platform_outw			__sn_outw
+#define platform_outl			__sn_outl
+#define platform_mmiowb			__sn_mmiowb
+#define platform_readb			__sn_readb
+#define platform_readw			__sn_readw
+#define platform_readl			__sn_readl
+#define platform_readq			__sn_readq
+#define platform_readb_relaxed		__sn_readb_relaxed
+#define platform_readw_relaxed		__sn_readw_relaxed
+#define platform_readl_relaxed		__sn_readl_relaxed
+#define platform_readq_relaxed		__sn_readq_relaxed
+#define platform_irq_to_vector		sn_irq_to_vector
+#define platform_local_vector_to_irq	sn_local_vector_to_irq
+#define platform_pci_get_legacy_mem	sn_pci_get_legacy_mem
+#define platform_pci_legacy_read	sn_pci_legacy_read
+#define platform_pci_legacy_write	sn_pci_legacy_write
+#define platform_dma_init		machvec_noop
+#define platform_dma_alloc_coherent	sn_dma_alloc_coherent
+#define platform_dma_free_coherent	sn_dma_free_coherent
+#define platform_dma_map_single_attrs	sn_dma_map_single_attrs
+#define platform_dma_unmap_single_attrs	sn_dma_unmap_single_attrs
+#define platform_dma_map_sg_attrs	sn_dma_map_sg_attrs
+#define platform_dma_unmap_sg_attrs	sn_dma_unmap_sg_attrs
+#define platform_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device sn_dma_sync_single_for_device
+#define platform_dma_sync_sg_for_device	sn_dma_sync_sg_for_device
+#define platform_dma_mapping_error		sn_dma_mapping_error
+#define platform_dma_supported		sn_dma_supported
+#define platform_migrate		sn_migrate
+#define platform_kernel_launch_event    sn_kernel_launch_event
+#ifdef CONFIG_PCI_MSI
+#define platform_setup_msi_irq		sn_setup_msi_irq
+#define platform_teardown_msi_irq	sn_teardown_msi_irq
+#else
+#define platform_setup_msi_irq		((ia64_mv_setup_msi_irq_t*)NULL)
+#define platform_teardown_msi_irq	((ia64_mv_teardown_msi_irq_t*)NULL)
+#endif
+#define platform_pci_fixup_bus		sn_pci_fixup_bus
+
+#include <asm/sn/io.h>
+
+#endif /* _ASM_IA64_MACHVEC_SN2_H */
diff --git a/arch/ia64/include/asm/machvec_uv.h b/arch/ia64/include/asm/machvec_uv.h
new file mode 100644
index 00000000000..2931447f381
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_uv.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Core Functions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_MACHVEC_UV_H
+#define _ASM_IA64_MACHVEC_UV_H
+
+extern ia64_mv_setup_t uv_setup;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name			"uv"
+#define platform_setup			uv_setup
+
+#endif /* _ASM_IA64_MACHVEC_UV_H */
diff --git a/arch/ia64/include/asm/mc146818rtc.h b/arch/ia64/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..407787a237b
--- /dev/null
+++ b/arch/ia64/include/asm/mc146818rtc.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_IA64_MC146818RTC_H
+#define _ASM_IA64_MC146818RTC_H
+
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+
+/* empty include file to satisfy the include in genrtc.c */
+
+#endif /* _ASM_IA64_MC146818RTC_H */
diff --git a/arch/ia64/include/asm/mca.h b/arch/ia64/include/asm/mca.h
new file mode 100644
index 00000000000..18a4321349a
--- /dev/null
+++ b/arch/ia64/include/asm/mca.h
@@ -0,0 +1,179 @@
+/*
+ * File:	mca.h
+ * Purpose:	Machine check handling specific defines
+ *
+ * Copyright (C) 1999, 2004 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) Russ Anderson <rja@sgi.com>
+ */
+
+#ifndef _ASM_IA64_MCA_H
+#define _ASM_IA64_MCA_H
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/sal.h>
+#include <asm/processor.h>
+#include <asm/mca_asm.h>
+
+#define IA64_MCA_RENDEZ_TIMEOUT		(20 * 1000)	/* value in milliseconds - 20 seconds */
+
+typedef struct ia64_fptr {
+	unsigned long fp;
+	unsigned long gp;
+} ia64_fptr_t;
+
+typedef union cmcv_reg_u {
+	u64	cmcv_regval;
+	struct	{
+		u64	cmcr_vector		: 8;
+		u64	cmcr_reserved1		: 4;
+		u64	cmcr_ignored1		: 1;
+		u64	cmcr_reserved2		: 3;
+		u64	cmcr_mask		: 1;
+		u64	cmcr_ignored2		: 47;
+	} cmcv_reg_s;
+
+} cmcv_reg_t;
+
+#define cmcv_mask		cmcv_reg_s.cmcr_mask
+#define cmcv_vector		cmcv_reg_s.cmcr_vector
+
+enum {
+	IA64_MCA_RENDEZ_CHECKIN_NOTDONE	=	0x0,
+	IA64_MCA_RENDEZ_CHECKIN_DONE	=	0x1,
+	IA64_MCA_RENDEZ_CHECKIN_INIT	=	0x2,
+	IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA	=	0x3,
+};
+
+/* Information maintained by the MC infrastructure */
+typedef struct ia64_mc_info_s {
+	u64		imi_mca_handler;
+	size_t		imi_mca_handler_size;
+	u64		imi_monarch_init_handler;
+	size_t		imi_monarch_init_handler_size;
+	u64		imi_slave_init_handler;
+	size_t		imi_slave_init_handler_size;
+	u8		imi_rendez_checkin[NR_CPUS];
+
+} ia64_mc_info_t;
+
+/* Handover state from SAL to OS and vice versa, for both MCA and INIT events.
+ * Besides the handover state, it also contains some saved registers from the
+ * time of the event.
+ * Note: mca_asm.S depends on the precise layout of this structure.
+ */
+
+struct ia64_sal_os_state {
+
+	/* SAL to OS */
+	u64			os_gp;			/* GP of the os registered with the SAL, physical */
+	u64			pal_proc;		/* PAL_PROC entry point, physical */
+	u64			sal_proc;		/* SAL_PROC entry point, physical */
+	u64			rv_rc;			/* MCA - Rendezvous state, INIT - reason code */
+	u64			proc_state_param;	/* from R18 */
+	u64			monarch;		/* 1 for a monarch event, 0 for a slave */
+
+	/* common */
+	u64			sal_ra;			/* Return address in SAL, physical */
+	u64			sal_gp;			/* GP of the SAL - physical */
+	pal_min_state_area_t	*pal_min_state;		/* from R17.  physical in asm, virtual in C */
+	/* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK).
+	 * Note: if the MCA/INIT recovery code wants to resume to a new context
+	 * then it must change these values to reflect the new kernel stack.
+	 */
+	u64			prev_IA64_KR_CURRENT;	/* previous value of IA64_KR(CURRENT) */
+	u64			prev_IA64_KR_CURRENT_STACK;
+	struct task_struct	*prev_task;		/* previous task, NULL if it is not useful */
+	/* Some interrupt registers are not saved in minstate, pt_regs or
+	 * switch_stack.  Because MCA/INIT can occur when interrupts are
+	 * disabled, we need to save the additional interrupt registers over
+	 * MCA/INIT and resume.
+	 */
+	u64			isr;
+	u64			ifa;
+	u64			itir;
+	u64			iipa;
+	u64			iim;
+	u64			iha;
+
+	/* OS to SAL */
+	u64			os_status;		/* OS status to SAL, enum below */
+	u64			context;		/* 0 if return to same context
+							   1 if return to new context */
+};
+
+enum {
+	IA64_MCA_CORRECTED	=	0x0,	/* Error has been corrected by OS_MCA */
+	IA64_MCA_WARM_BOOT	=	-1,	/* Warm boot of the system need from SAL */
+	IA64_MCA_COLD_BOOT	=	-2,	/* Cold boot of the system need from SAL */
+	IA64_MCA_HALT		=	-3	/* System to be halted by SAL */
+};
+
+enum {
+	IA64_INIT_RESUME	=	0x0,	/* Resume after return from INIT */
+	IA64_INIT_WARM_BOOT	=	-1,	/* Warm boot of the system need from SAL */
+};
+
+enum {
+	IA64_MCA_SAME_CONTEXT	=	0x0,	/* SAL to return to same context */
+	IA64_MCA_NEW_CONTEXT	=	-1	/* SAL to return to new context */
+};
+
+/* Per-CPU MCA state that is too big for normal per-CPU variables.  */
+
+struct ia64_mca_cpu {
+	u64 mca_stack[KERNEL_STACK_SIZE/8];
+	u64 init_stack[KERNEL_STACK_SIZE/8];
+};
+
+/* Array of physical addresses of each CPU's MCA area.  */
+extern unsigned long __per_cpu_mca[NR_CPUS];
+
+extern int cpe_vector;
+extern int ia64_cpe_irq;
+extern void ia64_mca_init(void);
+extern void ia64_mca_cpu_init(void *);
+extern void ia64_os_mca_dispatch(void);
+extern void ia64_os_mca_dispatch_end(void);
+extern void ia64_mca_ucmc_handler(struct pt_regs *, struct ia64_sal_os_state *);
+extern void ia64_init_handler(struct pt_regs *,
+			      struct switch_stack *,
+			      struct ia64_sal_os_state *);
+extern void ia64_monarch_init_handler(void);
+extern void ia64_slave_init_handler(void);
+extern void ia64_mca_cmc_vector_setup(void);
+extern int  ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *));
+extern void ia64_unreg_MCA_extension(void);
+extern u64 ia64_get_rnat(u64 *);
+extern void ia64_mca_printk(const char * fmt, ...)
+	 __attribute__ ((format (printf, 1, 2)));
+
+struct ia64_mca_notify_die {
+	struct ia64_sal_os_state *sos;
+	int *monarch_cpu;
+	int *data;
+};
+
+DECLARE_PER_CPU(u64, ia64_mca_pal_base);
+
+#else	/* __ASSEMBLY__ */
+
+#define IA64_MCA_CORRECTED	0x0	/* Error has been corrected by OS_MCA */
+#define IA64_MCA_WARM_BOOT	-1	/* Warm boot of the system need from SAL */
+#define IA64_MCA_COLD_BOOT	-2	/* Cold boot of the system need from SAL */
+#define IA64_MCA_HALT		-3	/* System to be halted by SAL */
+
+#define IA64_INIT_RESUME	0x0	/* Resume after return from INIT */
+#define IA64_INIT_WARM_BOOT	-1	/* Warm boot of the system need from SAL */
+
+#define IA64_MCA_SAME_CONTEXT	0x0	/* SAL to return to same context */
+#define IA64_MCA_NEW_CONTEXT	-1	/* SAL to return to new context */
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_MCA_H */
diff --git a/arch/ia64/include/asm/mca_asm.h b/arch/ia64/include/asm/mca_asm.h
new file mode 100644
index 00000000000..dd2a5b13439
--- /dev/null
+++ b/arch/ia64/include/asm/mca_asm.h
@@ -0,0 +1,242 @@
+/*
+ * File:	mca_asm.h
+ * Purpose:	Machine check handling specific defines
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) 2000 Hewlett-Packard Co.
+ * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2005 Silicon Graphics, Inc
+ * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
+ */
+#ifndef _ASM_IA64_MCA_ASM_H
+#define _ASM_IA64_MCA_ASM_H
+
+#define PSR_IC		13
+#define PSR_I		14
+#define	PSR_DT		17
+#define PSR_RT		27
+#define PSR_MC		35
+#define PSR_IT		36
+#define PSR_BN		44
+
+/*
+ * This macro converts a instruction virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define INST_VA_TO_PA(addr)							\
+	dep	addr	= 0, addr, 61, 3
+/*
+ * This macro converts a data virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define DATA_VA_TO_PA(addr)							\
+	tpa	addr	= addr
+/*
+ * This macro converts a data physical address to a virtual address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Put 0x7 in bits 61 thru 63.
+ */
+#define DATA_PA_TO_VA(addr,temp)							\
+	mov	temp	= 0x7	;;							\
+	dep	addr	= temp, addr, 61, 3
+
+#define GET_THIS_PADDR(reg, var)		\
+	mov	reg = IA64_KR(PER_CPU_DATA);;	\
+        addl	reg = THIS_CPU(var), reg
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in physical mode with all the address
+ * translations turned off.
+ *	1.	Save the current psr
+ *	2.	Make sure that all the upper 32 bits are off
+ *
+ *	3.	Clear the interrupt enable and interrupt state collection bits
+ *		in the psr before updating the ipsr and iip.
+ *
+ *	4.	Turn off the instruction, data and rse translation bits of the psr
+ *		and store the new value into ipsr
+ *		Also make sure that the interrupts are disabled.
+ *		Ensure that we are in little endian mode.
+ *		[psr.{rt, it, dt, i, be} = 0]
+ *
+ *	5.	Get the physical address corresponding to the virtual address
+ *		of the next instruction bundle and put it in iip.
+ *		(Using magic numbers 24 and 40 in the deposint instruction since
+ *		 the IA64_SDK code directly maps to lower 24bits as physical address
+ *		 from a virtual address).
+ *
+ *	6.	Do an rfi to move the values from ipsr to psr and iip to ip.
+ */
+#define  PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)				\
+	mov	old_psr = psr;								\
+	;;										\
+	dep	old_psr = 0, old_psr, 32, 32;						\
+											\
+	mov	ar.rsc = 0 ;								\
+	;;										\
+	srlz.d;										\
+	mov	temp2 = ar.bspstore;							\
+	;;										\
+	DATA_VA_TO_PA(temp2);								\
+	;;										\
+	mov	temp1 = ar.rnat;							\
+	;;										\
+	mov	ar.bspstore = temp2;							\
+	;;										\
+	mov	ar.rnat = temp1;							\
+	mov	temp1 = psr;								\
+	mov	temp2 = psr;								\
+	;;										\
+											\
+	dep	temp2 = 0, temp2, PSR_IC, 2;						\
+	;;										\
+	mov	psr.l = temp2;								\
+	;;										\
+	srlz.d;										\
+	dep	temp1 = 0, temp1, 32, 32;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_IT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_DT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_RT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_I, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_IC, 1;						\
+	;;										\
+	dep	temp1 = -1, temp1, PSR_MC, 1;						\
+	;;										\
+	mov	cr.ipsr = temp1;							\
+	;;										\
+	LOAD_PHYSICAL(p0, temp2, start_addr);						\
+	;;										\
+	mov	cr.iip = temp2;								\
+	mov	cr.ifs = r0;								\
+	DATA_VA_TO_PA(sp);								\
+	DATA_VA_TO_PA(gp);								\
+	;;										\
+	srlz.i;										\
+	;;										\
+	nop	1;									\
+	nop	2;									\
+	nop	1;									\
+	nop	2;									\
+	rfi;										\
+	;;
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in virtual mode with all the address
+ * translations turned on.
+ *	1.	Get the old saved psr
+ *
+ *	2.	Clear the interrupt state collection bit in the current psr.
+ *
+ *	3.	Set the instruction translation bit back in the old psr
+ *		Note we have to do this since we are right now saving only the
+ *		lower 32-bits of old psr.(Also the old psr has the data and
+ *		rse translation bits on)
+ *
+ *	4.	Set ipsr to this old_psr with "it" bit set and "bn" = 1.
+ *
+ *	5.	Reset the current thread pointer (r13).
+ *
+ *	6.	Set iip to the virtual address of the next instruction bundle.
+ *
+ *	7.	Do an rfi to move ipsr to psr and iip to ip.
+ */
+
+#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)	\
+	mov	temp2 = psr;					\
+	;;							\
+	mov	old_psr = temp2;				\
+	;;							\
+	dep	temp2 = 0, temp2, PSR_IC, 2;			\
+	;;							\
+	mov	psr.l = temp2;					\
+	mov	ar.rsc = 0;					\
+	;;							\
+	srlz.d;							\
+	mov	r13 = ar.k6;					\
+	mov	temp2 = ar.bspstore;				\
+	;;							\
+	DATA_PA_TO_VA(temp2,temp1);				\
+	;;							\
+	mov	temp1 = ar.rnat;				\
+	;;							\
+	mov	ar.bspstore = temp2;				\
+	;;							\
+	mov	ar.rnat = temp1;				\
+	;;							\
+	mov	temp1 = old_psr;				\
+	;;							\
+	mov	temp2 = 1;					\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_IC, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_IT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_DT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_RT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_BN, 1;		\
+	;;							\
+								\
+	mov     cr.ipsr = temp1;				\
+	movl	temp2 = start_addr;				\
+	;;							\
+	mov	cr.iip = temp2;					\
+	movl	gp = __gp					\
+	;;							\
+	DATA_PA_TO_VA(sp, temp1);				\
+	srlz.i;							\
+	;;							\
+	nop	1;						\
+	nop	2;						\
+	nop	1;						\
+	rfi							\
+	;;
+
+/*
+ * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel
+ * stacks, except that the SAL/OS state and a switch_stack are stored near the
+ * top of the MCA/INIT stack.  To support concurrent entry to MCA or INIT, as
+ * well as MCA over INIT, each event needs its own SAL/OS state.  All entries
+ * are 16 byte aligned.
+ *
+ *      +---------------------------+
+ *      |          pt_regs          |
+ *      +---------------------------+
+ *      |        switch_stack       |
+ *      +---------------------------+
+ *      |        SAL/OS state       |
+ *      +---------------------------+
+ *      |    16 byte scratch area   |
+ *      +---------------------------+ <-------- SP at start of C MCA handler
+ *      |           .....           |
+ *      +---------------------------+
+ *      | RBS for MCA/INIT handler  |
+ *      +---------------------------+
+ *      | struct task for MCA/INIT  |
+ *      +---------------------------+ <-------- Bottom of MCA/INIT stack
+ */
+
+#define ALIGN16(x)			((x)&~15)
+#define MCA_PT_REGS_OFFSET		ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE)
+#define MCA_SWITCH_STACK_OFFSET		ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE)
+#define MCA_SOS_OFFSET			ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE)
+#define MCA_SP_OFFSET			ALIGN16(MCA_SOS_OFFSET-16)
+
+#endif /* _ASM_IA64_MCA_ASM_H */
diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h
new file mode 100644
index 00000000000..7245a578159
--- /dev/null
+++ b/arch/ia64/include/asm/meminit.h
@@ -0,0 +1,75 @@
+#ifndef meminit_h
+#define meminit_h
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+
+/*
+ * Entries defined so far:
+ * 	- boot param structure itself
+ * 	- memory map
+ * 	- initrd (optional)
+ * 	- command line string
+ * 	- kernel code & data
+ * 	- crash dumping code reserved region
+ * 	- Kernel memory map built from EFI memory map
+ * 	- ELF core header
+ *
+ * More could be added if necessary
+ */
+#define IA64_MAX_RSVD_REGIONS 8
+
+struct rsvd_region {
+	unsigned long start;	/* virtual address of beginning of element */
+	unsigned long end;	/* virtual address of end of element + 1 */
+};
+
+extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1];
+extern int num_rsvd_regions;
+
+extern void find_memory (void);
+extern void reserve_memory (void);
+extern void find_initrd (void);
+extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
+extern int filter_memory (unsigned long start, unsigned long end, void *arg);
+extern unsigned long efi_memmap_init(unsigned long *s, unsigned long *e);
+extern int find_max_min_low_pfn (unsigned long , unsigned long, void *);
+
+extern unsigned long vmcore_find_descriptor_size(unsigned long address);
+extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end);
+
+/*
+ * For rounding an address to the next IA64_GRANULE_SIZE or order
+ */
+#define GRANULEROUNDDOWN(n)	((n) & ~(IA64_GRANULE_SIZE-1))
+#define GRANULEROUNDUP(n)	(((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
+#define ORDERROUNDDOWN(n)	((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
+
+#ifdef CONFIG_NUMA
+  extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
+#else
+# define call_pernode_memory(start, len, func)	(*func)(start, len, 0)
+#endif
+
+#define IGNORE_PFN0	1	/* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */
+
+extern int register_active_ranges(u64 start, u64 len, int nid);
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define LARGE_GAP	0x40000000 /* Use virtual mem map if hole is > than this */
+  extern unsigned long vmalloc_end;
+  extern struct page *vmem_map;
+  extern int find_largest_hole (u64 start, u64 end, void *arg);
+  extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
+  extern int vmemmap_find_next_valid_pfn(int, int);
+#else
+static inline int vmemmap_find_next_valid_pfn(int node, int i)
+{
+	return i + 1;
+}
+#endif
+#endif /* meminit_h */
diff --git a/arch/ia64/include/asm/mman.h b/arch/ia64/include/asm/mman.h
new file mode 100644
index 00000000000..c73b87832a1
--- /dev/null
+++ b/arch/ia64/include/asm/mman.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_IA64_MMAN_H
+#define _ASM_IA64_MMAN_H
+
+/*
+ * Based on <asm-i386/mman.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x00100		/* stack-like segment */
+#define MAP_GROWSUP	0x00200		/* register stack-like segment */
+#define MAP_DENYWRITE	0x00800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x01000		/* mark it as an executable */
+#define MAP_LOCKED	0x02000		/* pages are locked */
+#define MAP_NORESERVE	0x04000		/* don't check for reservations */
+#define MAP_POPULATE	0x08000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check	ia64_mmap_check
+int ia64_mmap_check(unsigned long addr, unsigned long len,
+		unsigned long flags);
+#endif
+#endif
+
+#endif /* _ASM_IA64_MMAN_H */
diff --git a/arch/ia64/include/asm/mmu.h b/arch/ia64/include/asm/mmu.h
new file mode 100644
index 00000000000..611432ba579
--- /dev/null
+++ b/arch/ia64/include/asm/mmu.h
@@ -0,0 +1,13 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/*
+ * Type for a context number.  We declare it volatile to ensure proper
+ * ordering when it's accessed outside of spinlock'd critical sections
+ * (e.g., as done in activate_mm() and init_new_context()).
+ */
+typedef volatile unsigned long mm_context_t;
+
+typedef unsigned long nv_mm_context_t;
+
+#endif
diff --git a/arch/ia64/include/asm/mmu_context.h b/arch/ia64/include/asm/mmu_context.h
new file mode 100644
index 00000000000..040bc87db93
--- /dev/null
+++ b/arch/ia64/include/asm/mmu_context.h
@@ -0,0 +1,198 @@
+#ifndef _ASM_IA64_MMU_CONTEXT_H
+#define _ASM_IA64_MMU_CONTEXT_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * Routines to manage the allocation of task context numbers.  Task context
+ * numbers are used to reduce or eliminate the need to perform TLB flushes
+ * due to context switches.  Context numbers are implemented using ia-64
+ * region ids.  Since the IA-64 TLB does not consider the region number when
+ * performing a TLB lookup, we need to assign a unique region id to each
+ * region in a process.  We use the least significant three bits in aregion
+ * id for this purpose.
+ */
+
+#define IA64_REGION_ID_KERNEL	0 /* the kernel's region id (tlb.c depends on this being 0) */
+
+#define ia64_rid(ctx,addr)	(((ctx) << 3) | (addr >> 61))
+
+# include <asm/page.h>
+# ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+#include <asm-generic/mm_hooks.h>
+
+struct ia64_ctx {
+	spinlock_t lock;
+	unsigned int next;	/* next context number to use */
+	unsigned int limit;     /* available free range */
+	unsigned int max_ctx;   /* max. context value supported by all CPUs */
+				/* call wrap_mmu_context when next >= max */
+	unsigned long *bitmap;  /* bitmap size is max_ctx+1 */
+	unsigned long *flushmap;/* pending rid to be flushed */
+};
+
+extern struct ia64_ctx ia64_ctx;
+DECLARE_PER_CPU(u8, ia64_need_tlb_flush);
+
+extern void mmu_context_init (void);
+extern void wrap_mmu_context (struct mm_struct *mm);
+
+static inline void
+enter_lazy_tlb (struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * When the context counter wraps around all TLBs need to be flushed because
+ * an old context number might have been reused. This is signalled by the
+ * ia64_need_tlb_flush per-CPU variable, which is checked in the routine
+ * below. Called by activate_mm(). <efocht@ess.nec.de>
+ */
+static inline void
+delayed_tlb_flush (void)
+{
+	extern void local_flush_tlb_all (void);
+	unsigned long flags;
+
+	if (unlikely(__ia64_per_cpu_var(ia64_need_tlb_flush))) {
+		spin_lock_irqsave(&ia64_ctx.lock, flags);
+		if (__ia64_per_cpu_var(ia64_need_tlb_flush)) {
+			local_flush_tlb_all();
+			__ia64_per_cpu_var(ia64_need_tlb_flush) = 0;
+		}
+		spin_unlock_irqrestore(&ia64_ctx.lock, flags);
+	}
+}
+
+static inline nv_mm_context_t
+get_mmu_context (struct mm_struct *mm)
+{
+	unsigned long flags;
+	nv_mm_context_t context = mm->context;
+
+	if (likely(context))
+		goto out;
+
+	spin_lock_irqsave(&ia64_ctx.lock, flags);
+	/* re-check, now that we've got the lock: */
+	context = mm->context;
+	if (context == 0) {
+		cpus_clear(mm->cpu_vm_mask);
+		if (ia64_ctx.next >= ia64_ctx.limit) {
+			ia64_ctx.next = find_next_zero_bit(ia64_ctx.bitmap,
+					ia64_ctx.max_ctx, ia64_ctx.next);
+			ia64_ctx.limit = find_next_bit(ia64_ctx.bitmap,
+					ia64_ctx.max_ctx, ia64_ctx.next);
+			if (ia64_ctx.next >= ia64_ctx.max_ctx)
+				wrap_mmu_context(mm);
+		}
+		mm->context = context = ia64_ctx.next++;
+		__set_bit(context, ia64_ctx.bitmap);
+	}
+	spin_unlock_irqrestore(&ia64_ctx.lock, flags);
+out:
+	/*
+	 * Ensure we're not starting to use "context" before any old
+	 * uses of it are gone from our TLB.
+	 */
+	delayed_tlb_flush();
+
+	return context;
+}
+
+/*
+ * Initialize context number to some sane value.  MM is guaranteed to be a
+ * brand-new address-space, so no TLB flushing is needed, ever.
+ */
+static inline int
+init_new_context (struct task_struct *p, struct mm_struct *mm)
+{
+	mm->context = 0;
+	return 0;
+}
+
+static inline void
+destroy_context (struct mm_struct *mm)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+reload_context (nv_mm_context_t context)
+{
+	unsigned long rid;
+	unsigned long rid_incr = 0;
+	unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4;
+
+	old_rr4 = ia64_get_rr(RGN_BASE(RGN_HPAGE));
+	rid = context << 3;	/* make space for encoding the region number */
+	rid_incr = 1 << 8;
+
+	/* encode the region id, preferred page size, and VHPT enable bit: */
+	rr0 = (rid << 8) | (PAGE_SHIFT << 2) | 1;
+	rr1 = rr0 + 1*rid_incr;
+	rr2 = rr0 + 2*rid_incr;
+	rr3 = rr0 + 3*rid_incr;
+	rr4 = rr0 + 4*rid_incr;
+#ifdef  CONFIG_HUGETLB_PAGE
+	rr4 = (rr4 & (~(0xfcUL))) | (old_rr4 & 0xfc);
+
+#  if RGN_HPAGE != 4
+#    error "reload_context assumes RGN_HPAGE is 4"
+#  endif
+#endif
+
+	ia64_set_rr0_to_rr4(rr0, rr1, rr2, rr3, rr4);
+	ia64_srlz_i();			/* srlz.i implies srlz.d */
+}
+
+/*
+ * Must be called with preemption off
+ */
+static inline void
+activate_context (struct mm_struct *mm)
+{
+	nv_mm_context_t context;
+
+	do {
+		context = get_mmu_context(mm);
+		if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+			cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+		reload_context(context);
+		/*
+		 * in the unlikely event of a TLB-flush by another thread,
+		 * redo the load.
+		 */
+	} while (unlikely(context != mm->context));
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * Switch from address space PREV to address space NEXT.
+ */
+static inline void
+activate_mm (struct mm_struct *prev, struct mm_struct *next)
+{
+	/*
+	 * We may get interrupts here, but that's OK because interrupt
+	 * handlers cannot touch user-space.
+	 */
+	ia64_set_kr(IA64_KR_PT_BASE, __pa(next->pgd));
+	activate_context(next);
+}
+
+#define switch_mm(prev_mm,next_mm,next_task)	activate_mm(prev_mm, next_mm)
+
+# endif /* ! __ASSEMBLY__ */
+#endif /* _ASM_IA64_MMU_CONTEXT_H */
diff --git a/arch/ia64/include/asm/mmzone.h b/arch/ia64/include/asm/mmzone.h
new file mode 100644
index 00000000000..34efe88eb84
--- /dev/null
+++ b/arch/ia64/include/asm/mmzone.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000,2003 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_MMZONE_H
+#define _ASM_IA64_MMZONE_H
+
+#include <linux/numa.h>
+#include <asm/page.h>
+#include <asm/meminit.h>
+
+#ifdef CONFIG_NUMA
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+#ifdef CONFIG_NUMA
+	extern int paddr_to_nid(unsigned long);
+	int nid = paddr_to_nid(pfn << PAGE_SHIFT);
+	if (nid < 0)
+		return 0;
+	else
+		return nid;
+#else
+	return 0;
+#endif
+}
+
+#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+extern int early_pfn_to_nid(unsigned long pfn);
+#endif
+
+#ifdef CONFIG_IA64_DIG /* DIG systems are small */
+# define MAX_PHYSNODE_ID	8
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 8)
+#else /* sn2 is the biggest case, so we use that if !DIG */
+# define MAX_PHYSNODE_ID	2048
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#endif
+
+#else /* CONFIG_NUMA */
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_MMZONE_H */
diff --git a/arch/ia64/include/asm/module.h b/arch/ia64/include/asm/module.h
new file mode 100644
index 00000000000..d2da61e4c49
--- /dev/null
+++ b/arch/ia64/include/asm/module.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_IA64_MODULE_H
+#define _ASM_IA64_MODULE_H
+
+/*
+ * IA-64-specific support for kernel module loader.
+ *
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+struct elf64_shdr;			/* forward declration */
+
+struct mod_arch_specific {
+	struct elf64_shdr *core_plt;	/* core PLT section */
+	struct elf64_shdr *init_plt;	/* init PLT section */
+	struct elf64_shdr *got;		/* global offset table */
+	struct elf64_shdr *opd;		/* official procedure descriptors */
+	struct elf64_shdr *unwind;	/* unwind-table section */
+	unsigned long gp;		/* global-pointer for module */
+
+	void *core_unw_table;		/* core unwind-table cookie returned by unwinder */
+	void *init_unw_table;		/* init unwind-table cookie returned by unwinder */
+	unsigned int next_got_entry;	/* index of next available got entry */
+};
+
+#define Elf_Shdr	Elf64_Shdr
+#define Elf_Sym		Elf64_Sym
+#define Elf_Ehdr	Elf64_Ehdr
+
+#define MODULE_PROC_FAMILY	"ia64"
+#define MODULE_ARCH_VERMAGIC	MODULE_PROC_FAMILY \
+	"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
+
+#define ARCH_SHF_SMALL	SHF_IA_64_SHORT
+
+#endif /* _ASM_IA64_MODULE_H */
diff --git a/arch/ia64/include/asm/msgbuf.h b/arch/ia64/include/asm/msgbuf.h
new file mode 100644
index 00000000000..6c64c0d2aae
--- /dev/null
+++ b/arch/ia64/include/asm/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_IA64_MSGBUF_H
+#define _ASM_IA64_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _ASM_IA64_MSGBUF_H */
diff --git a/arch/ia64/include/asm/mutex.h b/arch/ia64/include/asm/mutex.h
new file mode 100644
index 00000000000..bed73a643a5
--- /dev/null
+++ b/arch/ia64/include/asm/mutex.h
@@ -0,0 +1,92 @@
+/*
+ * ia64 implementation of the mutex fastpath.
+ *
+ * Copyright (C) 2006 Ken Chen <kenneth.w.chen@intel.com>
+ *
+ */
+
+#ifndef _ASM_MUTEX_H
+#define _ASM_MUTEX_H
+
+/**
+ *  __mutex_fastpath_lock - try to take the lock by moving the count
+ *                          from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if
+ * it wasn't 1 originally. This function MUST leave the value lower than
+ * 1 even when the "1" assertion wasn't true.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	if (unlikely(ia64_fetchadd4_acq(count, -1) != 1))
+		fail_fn(count);
+}
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if
+ * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns.
+ */
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	if (unlikely(ia64_fetchadd4_acq(count, -1) != 1))
+		return fail_fn(count);
+	return 0;
+}
+
+/**
+ *  __mutex_fastpath_unlock - try to promote the count from 0 to 1
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 0
+ *
+ * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>.
+ * In the failure case, this function is allowed to either set the value to
+ * 1, or to set it to a value lower than 1.
+ *
+ * If the implementation sets it to a value of lower than 1, then the
+ * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
+ * to return 0 otherwise.
+ */
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int ret = ia64_fetchadd4_rel(count, 1);
+	if (unlikely(ret < 0))
+		fail_fn(count);
+}
+
+#define __mutex_slowpath_needs_to_unlock()		1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: fallback function
+ *
+ * Change the count from 1 to a value lower than 1, and return 0 (failure)
+ * if it wasn't 1 originally, or return 1 (success) otherwise. This function
+ * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
+ * Additionally, if the value was < 0 originally, this function must not leave
+ * it to 0 on failure.
+ *
+ * If the architecture has no effective trylock variant, it should call the
+ * <fail_fn> spinlock-based trylock variant unconditionally.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	if (cmpxchg_acq(count, 1, 0) == 1)
+		return 1;
+	return 0;
+}
+
+#endif
diff --git a/arch/ia64/include/asm/native/inst.h b/arch/ia64/include/asm/native/inst.h
new file mode 100644
index 00000000000..c8efbf7b849
--- /dev/null
+++ b/arch/ia64/include/asm/native/inst.h
@@ -0,0 +1,175 @@
+/******************************************************************************
+ * arch/ia64/include/asm/native/inst.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define DO_SAVE_MIN		IA64_NATIVE_DO_SAVE_MIN
+
+#define __paravirt_switch_to			ia64_native_switch_to
+#define __paravirt_leave_syscall		ia64_native_leave_syscall
+#define __paravirt_work_processed_syscall	ia64_native_work_processed_syscall
+#define __paravirt_leave_kernel			ia64_native_leave_kernel
+#define __paravirt_pending_syscall_end		ia64_work_pending_syscall_end
+#define __paravirt_work_processed_syscall_target \
+						ia64_work_processed_syscall
+
+#ifdef CONFIG_PARAVIRT_GUEST_ASM_CLOBBER_CHECK
+# define PARAVIRT_POISON	0xdeadbeefbaadf00d
+# define CLOBBER(clob)				\
+	;;					\
+	movl clob = PARAVIRT_POISON;		\
+	;;
+#else
+# define CLOBBER(clob)		/* nothing */
+#endif
+
+#define MOV_FROM_IFA(reg)	\
+	mov reg = cr.ifa
+
+#define MOV_FROM_ITIR(reg)	\
+	mov reg = cr.itir
+
+#define MOV_FROM_ISR(reg)	\
+	mov reg = cr.isr
+
+#define MOV_FROM_IHA(reg)	\
+	mov reg = cr.iha
+
+#define MOV_FROM_IPSR(pred, reg)	\
+(pred)	mov reg = cr.ipsr
+
+#define MOV_FROM_IIM(reg)	\
+	mov reg = cr.iim
+
+#define MOV_FROM_IIP(reg)	\
+	mov reg = cr.iip
+
+#define MOV_FROM_IVR(reg, clob)	\
+	mov reg = cr.ivr	\
+	CLOBBER(clob)
+
+#define MOV_FROM_PSR(pred, reg, clob)	\
+(pred)	mov reg = psr			\
+	CLOBBER(clob)
+
+#define MOV_TO_IFA(reg, clob)	\
+	mov cr.ifa = reg	\
+	CLOBBER(clob)
+
+#define MOV_TO_ITIR(pred, reg, clob)	\
+(pred)	mov cr.itir = reg		\
+	CLOBBER(clob)
+
+#define MOV_TO_IHA(pred, reg, clob)	\
+(pred)	mov cr.iha = reg		\
+	CLOBBER(clob)
+
+#define MOV_TO_IPSR(pred, reg, clob)		\
+(pred)	mov cr.ipsr = reg			\
+	CLOBBER(clob)
+
+#define MOV_TO_IFS(pred, reg, clob)	\
+(pred)	mov cr.ifs = reg		\
+	CLOBBER(clob)
+
+#define MOV_TO_IIP(reg, clob)	\
+	mov cr.iip = reg	\
+	CLOBBER(clob)
+
+#define MOV_TO_KR(kr, reg, clob0, clob1)	\
+	mov IA64_KR(kr) = reg			\
+	CLOBBER(clob0)				\
+	CLOBBER(clob1)
+
+#define ITC_I(pred, reg, clob)	\
+(pred)	itc.i reg		\
+	CLOBBER(clob)
+
+#define ITC_D(pred, reg, clob)	\
+(pred)	itc.d reg		\
+	CLOBBER(clob)
+
+#define ITC_I_AND_D(pred_i, pred_d, reg, clob)	\
+(pred_i) itc.i reg;				\
+(pred_d) itc.d reg				\
+	CLOBBER(clob)
+
+#define THASH(pred, reg0, reg1, clob)		\
+(pred)	thash reg0 = reg1			\
+	CLOBBER(clob)
+
+#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1)		\
+	ssm psr.ic | PSR_DEFAULT_BITS					\
+	CLOBBER(clob0)							\
+	CLOBBER(clob1)							\
+	;;								\
+	srlz.i /* guarantee that interruption collectin is on */	\
+	;;
+
+#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1)	\
+	ssm psr.ic				\
+	CLOBBER(clob0)				\
+	CLOBBER(clob1)				\
+	;;					\
+	srlz.d
+
+#define RSM_PSR_IC(clob)	\
+	rsm psr.ic		\
+	CLOBBER(clob)
+
+#define SSM_PSR_I(pred, pred_clob, clob)	\
+(pred)	ssm psr.i				\
+	CLOBBER(clob)
+
+#define RSM_PSR_I(pred, clob0, clob1)	\
+(pred)	rsm psr.i			\
+	CLOBBER(clob0)			\
+	CLOBBER(clob1)
+
+#define RSM_PSR_I_IC(clob0, clob1, clob2)	\
+	rsm psr.i | psr.ic			\
+	CLOBBER(clob0)				\
+	CLOBBER(clob1)				\
+	CLOBBER(clob2)
+
+#define RSM_PSR_DT		\
+	rsm psr.dt
+
+#define SSM_PSR_DT_AND_SRLZ_I	\
+	ssm psr.dt		\
+	;;			\
+	srlz.i
+
+#define BSW_0(clob0, clob1, clob2)	\
+	bsw.0				\
+	CLOBBER(clob0)			\
+	CLOBBER(clob1)			\
+	CLOBBER(clob2)
+
+#define BSW_1(clob0, clob1)	\
+	bsw.1			\
+	CLOBBER(clob0)		\
+	CLOBBER(clob1)
+
+#define COVER	\
+	cover
+
+#define RFI	\
+	rfi
diff --git a/arch/ia64/include/asm/native/irq.h b/arch/ia64/include/asm/native/irq.h
new file mode 100644
index 00000000000..887a228e2ed
--- /dev/null
+++ b/arch/ia64/include/asm/native/irq.h
@@ -0,0 +1,33 @@
+/******************************************************************************
+ * arch/ia64/include/asm/native/irq.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASM_IA64_NATIVE_IRQ_H
+#define _ASM_IA64_NATIVE_IRQ_H
+
+#define NR_VECTORS	256
+
+#if (NR_VECTORS + 32 * NR_CPUS) < 1024
+#define IA64_NATIVE_NR_IRQS (NR_VECTORS + 32 * NR_CPUS)
+#else
+#define IA64_NATIVE_NR_IRQS 1024
+#endif
+
+#endif /* _ASM_IA64_NATIVE_IRQ_H */
diff --git a/arch/ia64/include/asm/nodedata.h b/arch/ia64/include/asm/nodedata.h
new file mode 100644
index 00000000000..2fb337b0e9b
--- /dev/null
+++ b/arch/ia64/include/asm/nodedata.h
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_NODEDATA_H
+#define _ASM_IA64_NODEDATA_H
+
+#include <linux/numa.h>
+
+#include <asm/percpu.h>
+#include <asm/mmzone.h>
+
+#ifdef CONFIG_NUMA
+
+/*
+ * Node Data. One of these structures is located on each node of a NUMA system.
+ */
+
+struct pglist_data;
+struct ia64_node_data {
+	short			active_cpu_count;
+	short			node;
+	struct pglist_data	*pg_data_ptrs[MAX_NUMNODES];
+};
+
+
+/*
+ * Return a pointer to the node_data structure for the executing cpu.
+ */
+#define local_node_data		(local_cpu_data->node_data)
+
+/*
+ * Given a node id, return a pointer to the pg_data_t for the node.
+ *
+ * NODE_DATA 	- should be used in all code not related to system
+ *		  initialization. It uses pernode data structures to minimize
+ *		  offnode memory references. However, these structure are not 
+ *		  present during boot. This macro can be used once cpu_init
+ *		  completes.
+ */
+#define NODE_DATA(nid)		(local_node_data->pg_data_ptrs[nid])
+
+/*
+ * LOCAL_DATA_ADDR - This is to calculate the address of other node's
+ *		     "local_node_data" at hot-plug phase. The local_node_data
+ *		     is pointed by per_cpu_page. Kernel usually use it for
+ *		     just executing cpu. However, when new node is hot-added,
+ *		     the addresses of local data for other nodes are necessary
+ *		     to update all of them.
+ */
+#define LOCAL_DATA_ADDR(pgdat)  			\
+	((struct ia64_node_data *)((u64)(pgdat) + 	\
+				   L1_CACHE_ALIGN(sizeof(struct pglist_data))))
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_NODEDATA_H */
diff --git a/arch/ia64/include/asm/numa.h b/arch/ia64/include/asm/numa.h
new file mode 100644
index 00000000000..3499ff57bf4
--- /dev/null
+++ b/arch/ia64/include/asm/numa.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains NUMA specific prototypes and definitions.
+ *
+ * 2002/08/05 Erich Focht <efocht@ess.nec.de>
+ *
+ */
+#ifndef _ASM_IA64_NUMA_H
+#define _ASM_IA64_NUMA_H
+
+
+#ifdef CONFIG_NUMA
+
+#include <linux/cache.h>
+#include <linux/cpumask.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+
+#include <asm/mmzone.h>
+
+#define NUMA_NO_NODE	-1
+
+extern u16 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
+extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
+extern pg_data_t *pgdat_list[MAX_NUMNODES];
+
+/* Stuff below this line could be architecture independent */
+
+extern int num_node_memblks;		/* total number of memory chunks */
+
+/*
+ * List of node memory chunks. Filled when parsing SRAT table to
+ * obtain information about memory nodes.
+*/
+
+struct node_memblk_s {
+	unsigned long start_paddr;
+	unsigned long size;
+	int nid;		/* which logical node contains this chunk? */
+	int bank;		/* which mem bank on this node */
+};
+
+struct node_cpuid_s {
+	u16	phys_id;	/* id << 8 | eid */
+	int	nid;		/* logical node containing this CPU */
+};
+
+extern struct node_memblk_s node_memblk[NR_NODE_MEMBLKS];
+extern struct node_cpuid_s node_cpuid[NR_CPUS];
+
+/*
+ * ACPI 2.0 SLIT (System Locality Information Table)
+ * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
+ *
+ * This is a matrix with "distances" between nodes, they should be
+ * proportional to the memory access latency ratios.
+ */
+
+extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
+#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)])
+
+extern int paddr_to_nid(unsigned long paddr);
+
+#define local_nodeid (cpu_to_node_map[smp_processor_id()])
+
+extern void map_cpu_to_node(int cpu, int nid);
+extern void unmap_cpu_from_node(int cpu, int nid);
+
+
+#else /* !CONFIG_NUMA */
+#define map_cpu_to_node(cpu, nid)	do{}while(0)
+#define unmap_cpu_from_node(cpu, nid)	do{}while(0)
+
+#define paddr_to_nid(addr)	0
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_NUMA_H */
diff --git a/arch/ia64/include/asm/page.h b/arch/ia64/include/asm/page.h
new file mode 100644
index 00000000000..5f271bc712e
--- /dev/null
+++ b/arch/ia64/include/asm/page.h
@@ -0,0 +1,223 @@
+#ifndef _ASM_IA64_PAGE_H
+#define _ASM_IA64_PAGE_H
+/*
+ * Pagetable related stuff.
+ *
+ * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/intrinsics.h>
+#include <asm/types.h>
+
+/*
+ * The top three bits of an IA64 address are its Region Number.
+ * Different regions are assigned to different purposes.
+ */
+#define RGN_SHIFT	(61)
+#define RGN_BASE(r)	(__IA64_UL_CONST(r)<<RGN_SHIFT)
+#define RGN_BITS	(RGN_BASE(-1))
+
+#define RGN_KERNEL	7	/* Identity mapped region */
+#define RGN_UNCACHED    6	/* Identity mapped I/O region */
+#define RGN_GATE	5	/* Gate page, Kernel text, etc */
+#define RGN_HPAGE	4	/* For Huge TLB pages */
+
+/*
+ * PAGE_SHIFT determines the actual kernel page size.
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_IA64_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error Unsupported page size!
+#endif
+
+#define PAGE_SIZE		(__IA64_UL_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE - 1))
+
+#define PERCPU_PAGE_SHIFT	16	/* log2() of max. size of per-CPU area */
+#define PERCPU_PAGE_SIZE	(__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
+
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define HPAGE_REGION_BASE	RGN_BASE(RGN_HPAGE)
+# define HPAGE_SHIFT		hpage_shift
+# define HPAGE_SHIFT_DEFAULT	28	/* check ia64 SDM for architecture supported size */
+# define HPAGE_SIZE		(__IA64_UL_CONST(1) << HPAGE_SHIFT)
+# define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+
+# define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif /* CONFIG_HUGETLB_PAGE */
+
+#ifdef __ASSEMBLY__
+# define __pa(x)		((x) - PAGE_OFFSET)
+# define __va(x)		((x) + PAGE_OFFSET)
+#else /* !__ASSEMBLY */
+#  define STRICT_MM_TYPECHECKS
+
+extern void clear_page (void *page);
+extern void copy_page (void *to, void *from);
+
+/*
+ * clear_user_page() and copy_user_page() can't be inline functions because
+ * flush_dcache_page() can't be defined until later...
+ */
+#define clear_user_page(addr, vaddr, page)	\
+do {						\
+	clear_page(addr);			\
+	flush_dcache_page(page);		\
+} while (0)
+
+#define copy_user_page(to, from, vaddr, page)	\
+do {						\
+	copy_page((to), (from));		\
+	flush_dcache_page(page);		\
+} while (0)
+
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr)		\
+({									\
+	struct page *page = alloc_page_vma(				\
+		GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr);	\
+	if (page)							\
+ 		flush_dcache_page(page);				\
+	page;								\
+})
+
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+extern int ia64_pfn_valid (unsigned long pfn);
+#else
+# define ia64_pfn_valid(pfn) 1
+#endif
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+extern struct page *vmem_map;
+#ifdef CONFIG_DISCONTIGMEM
+# define page_to_pfn(page)	((unsigned long) (page - vmem_map))
+# define pfn_to_page(pfn)	(vmem_map + (pfn))
+#else
+# include <asm-generic/memory_model.h>
+#endif
+#else
+# include <asm-generic/memory_model.h>
+#endif
+
+#ifdef CONFIG_FLATMEM
+# define pfn_valid(pfn)		(((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
+#elif defined(CONFIG_DISCONTIGMEM)
+extern unsigned long min_low_pfn;
+extern unsigned long max_low_pfn;
+# define pfn_valid(pfn)		(((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
+#endif
+
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+typedef union ia64_va {
+	struct {
+		unsigned long off : 61;		/* intra-region offset */
+		unsigned long reg :  3;		/* region number */
+	} f;
+	unsigned long l;
+	void *p;
+} ia64_va;
+
+/*
+ * Note: These macros depend on the fact that PAGE_OFFSET has all
+ * region bits set to 1 and all other bits set to zero.  They are
+ * expressed in this way to ensure they result in a single "dep"
+ * instruction.
+ */
+#define __pa(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = 0; _v.l;})
+#define __va(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = -1; _v.p;})
+
+#define REGION_NUMBER(x)	({ia64_va _v; _v.l = (long) (x); _v.f.reg;})
+#define REGION_OFFSET(x)	({ia64_va _v; _v.l = (long) (x); _v.f.off;})
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define htlbpage_to_page(x)	(((unsigned long) REGION_NUMBER(x) << 61)			\
+				 | (REGION_OFFSET(x) >> (HPAGE_SHIFT-PAGE_SHIFT)))
+# define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+extern unsigned int hpage_shift;
+#endif
+
+static __inline__ int
+get_order (unsigned long size)
+{
+	long double d = size - 1;
+	long order;
+
+	order = ia64_getf_exp(d);
+	order = order - PAGE_SHIFT - 0xffff + 1;
+	if (order < 0)
+		order = 0;
+	return order;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef STRICT_MM_TYPECHECKS
+  /*
+   * These are used to make use of C type-checking..
+   */
+  typedef struct { unsigned long pte; } pte_t;
+  typedef struct { unsigned long pmd; } pmd_t;
+#ifdef CONFIG_PGTABLE_4
+  typedef struct { unsigned long pud; } pud_t;
+#endif
+  typedef struct { unsigned long pgd; } pgd_t;
+  typedef struct { unsigned long pgprot; } pgprot_t;
+  typedef struct page *pgtable_t;
+
+# define pte_val(x)	((x).pte)
+# define pmd_val(x)	((x).pmd)
+#ifdef CONFIG_PGTABLE_4
+# define pud_val(x)	((x).pud)
+#endif
+# define pgd_val(x)	((x).pgd)
+# define pgprot_val(x)	((x).pgprot)
+
+# define __pte(x)	((pte_t) { (x) } )
+# define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+  /*
+   * .. while these make it easier on the compiler
+   */
+# ifndef __ASSEMBLY__
+    typedef unsigned long pte_t;
+    typedef unsigned long pmd_t;
+    typedef unsigned long pgd_t;
+    typedef unsigned long pgprot_t;
+    typedef struct page *pgtable_t;
+# endif
+
+# define pte_val(x)	(x)
+# define pmd_val(x)	(x)
+# define pgd_val(x)	(x)
+# define pgprot_val(x)	(x)
+
+# define __pte(x)	(x)
+# define __pgd(x)	(x)
+# define __pgprot(x)	(x)
+#endif /* !STRICT_MM_TYPECHECKS */
+
+#define PAGE_OFFSET			RGN_BASE(RGN_KERNEL)
+
+#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE |					\
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |		\
+					 (((current->personality & READ_IMPLIES_EXEC) != 0)	\
+					  ? VM_EXEC : 0))
+
+#endif /* _ASM_IA64_PAGE_H */
diff --git a/arch/ia64/include/asm/pal.h b/arch/ia64/include/asm/pal.h
new file mode 100644
index 00000000000..67b02901ead
--- /dev/null
+++ b/arch/ia64/include/asm/pal.h
@@ -0,0 +1,1827 @@
+#ifndef _ASM_IA64_PAL_H
+#define _ASM_IA64_PAL_H
+
+/*
+ * Processor Abstraction Layer definitions.
+ *
+ * This is based on Intel IA-64 Architecture Software Developer's Manual rev 1.0
+ * chapter 11 IA-64 Processor Abstraction Layer
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ * Copyright (C) 2008 Silicon Graphics, Inc. (SGI)
+ *
+ * 99/10/01	davidm	Make sure we pass zero for reserved parameters.
+ * 00/03/07	davidm	Updated pal_cache_flush() to be in sync with PAL v2.6.
+ * 00/03/23     cfleck  Modified processor min-state save area to match updated PAL & SAL info
+ * 00/05/24     eranian Updated to latest PAL spec, fix structures bugs, added
+ * 00/05/25	eranian Support for stack calls, and static physical calls
+ * 00/06/18	eranian Support for stacked physical calls
+ * 06/10/26	rja	Support for Intel Itanium Architecture Software Developer's
+ *			Manual Rev 2.2 (Jan 2006)
+ */
+
+/*
+ * Note that some of these calls use a static-register only calling
+ * convention which has nothing to do with the regular calling
+ * convention.
+ */
+#define PAL_CACHE_FLUSH		1	/* flush i/d cache */
+#define PAL_CACHE_INFO		2	/* get detailed i/d cache info */
+#define PAL_CACHE_INIT		3	/* initialize i/d cache */
+#define PAL_CACHE_SUMMARY	4	/* get summary of cache hierarchy */
+#define PAL_MEM_ATTRIB		5	/* list supported memory attributes */
+#define PAL_PTCE_INFO		6	/* purge TLB info */
+#define PAL_VM_INFO		7	/* return supported virtual memory features */
+#define PAL_VM_SUMMARY		8	/* return summary on supported vm features */
+#define PAL_BUS_GET_FEATURES	9	/* return processor bus interface features settings */
+#define PAL_BUS_SET_FEATURES	10	/* set processor bus features */
+#define PAL_DEBUG_INFO		11	/* get number of debug registers */
+#define PAL_FIXED_ADDR		12	/* get fixed component of processors's directed address */
+#define PAL_FREQ_BASE		13	/* base frequency of the platform */
+#define PAL_FREQ_RATIOS		14	/* ratio of processor, bus and ITC frequency */
+#define PAL_PERF_MON_INFO	15	/* return performance monitor info */
+#define PAL_PLATFORM_ADDR	16	/* set processor interrupt block and IO port space addr */
+#define PAL_PROC_GET_FEATURES	17	/* get configurable processor features & settings */
+#define PAL_PROC_SET_FEATURES	18	/* enable/disable configurable processor features */
+#define PAL_RSE_INFO		19	/* return rse information */
+#define PAL_VERSION		20	/* return version of PAL code */
+#define PAL_MC_CLEAR_LOG	21	/* clear all processor log info */
+#define PAL_MC_DRAIN		22	/* drain operations which could result in an MCA */
+#define PAL_MC_EXPECTED		23	/* set/reset expected MCA indicator */
+#define PAL_MC_DYNAMIC_STATE	24	/* get processor dynamic state */
+#define PAL_MC_ERROR_INFO	25	/* get processor MCA info and static state */
+#define PAL_MC_RESUME		26	/* Return to interrupted process */
+#define PAL_MC_REGISTER_MEM	27	/* Register memory for PAL to use during MCAs and inits */
+#define PAL_HALT		28	/* enter the low power HALT state */
+#define PAL_HALT_LIGHT		29	/* enter the low power light halt state*/
+#define PAL_COPY_INFO		30	/* returns info needed to relocate PAL */
+#define PAL_CACHE_LINE_INIT	31	/* init tags & data of cache line */
+#define PAL_PMI_ENTRYPOINT	32	/* register PMI memory entry points with the processor */
+#define PAL_ENTER_IA_32_ENV	33	/* enter IA-32 system environment */
+#define PAL_VM_PAGE_SIZE	34	/* return vm TC and page walker page sizes */
+
+#define PAL_MEM_FOR_TEST	37	/* get amount of memory needed for late processor test */
+#define PAL_CACHE_PROT_INFO	38	/* get i/d cache protection info */
+#define PAL_REGISTER_INFO	39	/* return AR and CR register information*/
+#define PAL_SHUTDOWN		40	/* enter processor shutdown state */
+#define PAL_PREFETCH_VISIBILITY	41	/* Make Processor Prefetches Visible */
+#define PAL_LOGICAL_TO_PHYSICAL 42	/* returns information on logical to physical processor mapping */
+#define PAL_CACHE_SHARED_INFO	43	/* returns information on caches shared by logical processor */
+#define PAL_GET_HW_POLICY	48	/* Get current hardware resource sharing policy */
+#define PAL_SET_HW_POLICY	49	/* Set current hardware resource sharing policy */
+#define PAL_VP_INFO		50	/* Information about virtual processor features */
+#define PAL_MC_HW_TRACKING	51	/* Hardware tracking status */
+
+#define PAL_COPY_PAL		256	/* relocate PAL procedures and PAL PMI */
+#define PAL_HALT_INFO		257	/* return the low power capabilities of processor */
+#define PAL_TEST_PROC		258	/* perform late processor self-test */
+#define PAL_CACHE_READ		259	/* read tag & data of cacheline for diagnostic testing */
+#define PAL_CACHE_WRITE		260	/* write tag & data of cacheline for diagnostic testing */
+#define PAL_VM_TR_READ		261	/* read contents of translation register */
+#define PAL_GET_PSTATE		262	/* get the current P-state */
+#define PAL_SET_PSTATE		263	/* set the P-state */
+#define PAL_BRAND_INFO		274	/* Processor branding information */
+
+#define PAL_GET_PSTATE_TYPE_LASTSET	0
+#define PAL_GET_PSTATE_TYPE_AVGANDRESET	1
+#define PAL_GET_PSTATE_TYPE_AVGNORESET	2
+#define PAL_GET_PSTATE_TYPE_INSTANT	3
+
+#define PAL_MC_ERROR_INJECT	276	/* Injects processor error or returns injection capabilities */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/fpu.h>
+
+/*
+ * Data types needed to pass information into PAL procedures and
+ * interpret information returned by them.
+ */
+
+/* Return status from the PAL procedure */
+typedef s64				pal_status_t;
+
+#define PAL_STATUS_SUCCESS		0	/* No error */
+#define PAL_STATUS_UNIMPLEMENTED	(-1)	/* Unimplemented procedure */
+#define PAL_STATUS_EINVAL		(-2)	/* Invalid argument */
+#define PAL_STATUS_ERROR		(-3)	/* Error */
+#define PAL_STATUS_CACHE_INIT_FAIL	(-4)	/* Could not initialize the
+						 * specified level and type of
+						 * cache without sideeffects
+						 * and "restrict" was 1
+						 */
+#define PAL_STATUS_REQUIRES_MEMORY	(-9)	/* Call requires PAL memory buffer */
+
+/* Processor cache level in the hierarchy */
+typedef u64				pal_cache_level_t;
+#define PAL_CACHE_LEVEL_L0		0	/* L0 */
+#define PAL_CACHE_LEVEL_L1		1	/* L1 */
+#define PAL_CACHE_LEVEL_L2		2	/* L2 */
+
+
+/* Processor cache type at a particular level in the hierarchy */
+
+typedef u64				pal_cache_type_t;
+#define PAL_CACHE_TYPE_INSTRUCTION	1	/* Instruction cache */
+#define PAL_CACHE_TYPE_DATA		2	/* Data or unified cache */
+#define PAL_CACHE_TYPE_INSTRUCTION_DATA	3	/* Both Data & Instruction */
+
+
+#define PAL_CACHE_FLUSH_INVALIDATE	1	/* Invalidate clean lines */
+#define PAL_CACHE_FLUSH_CHK_INTRS	2	/* check for interrupts/mc while flushing */
+
+/* Processor cache line size in bytes  */
+typedef int				pal_cache_line_size_t;
+
+/* Processor cache line state */
+typedef u64				pal_cache_line_state_t;
+#define PAL_CACHE_LINE_STATE_INVALID	0	/* Invalid */
+#define PAL_CACHE_LINE_STATE_SHARED	1	/* Shared */
+#define PAL_CACHE_LINE_STATE_EXCLUSIVE	2	/* Exclusive */
+#define PAL_CACHE_LINE_STATE_MODIFIED	3	/* Modified */
+
+typedef struct pal_freq_ratio {
+	u32 den, num;		/* numerator & denominator */
+} itc_ratio, proc_ratio;
+
+typedef	union  pal_cache_config_info_1_s {
+	struct {
+		u64		u		: 1,	/* 0 Unified cache ? */
+				at		: 2,	/* 2-1 Cache mem attr*/
+				reserved	: 5,	/* 7-3 Reserved */
+				associativity	: 8,	/* 16-8 Associativity*/
+				line_size	: 8,	/* 23-17 Line size */
+				stride		: 8,	/* 31-24 Stride */
+				store_latency	: 8,	/*39-32 Store latency*/
+				load_latency	: 8,	/* 47-40 Load latency*/
+				store_hints	: 8,	/* 55-48 Store hints*/
+				load_hints	: 8;	/* 63-56 Load hints */
+	} pcci1_bits;
+	u64			pcci1_data;
+} pal_cache_config_info_1_t;
+
+typedef	union  pal_cache_config_info_2_s {
+	struct {
+		u32		cache_size;		/*cache size in bytes*/
+
+
+		u32		alias_boundary	: 8,	/* 39-32 aliased addr
+							 * separation for max
+							 * performance.
+							 */
+				tag_ls_bit	: 8,	/* 47-40 LSb of addr*/
+				tag_ms_bit	: 8,	/* 55-48 MSb of addr*/
+				reserved	: 8;	/* 63-56 Reserved */
+	} pcci2_bits;
+	u64			pcci2_data;
+} pal_cache_config_info_2_t;
+
+
+typedef struct pal_cache_config_info_s {
+	pal_status_t			pcci_status;
+	pal_cache_config_info_1_t	pcci_info_1;
+	pal_cache_config_info_2_t	pcci_info_2;
+	u64				pcci_reserved;
+} pal_cache_config_info_t;
+
+#define pcci_ld_hints		pcci_info_1.pcci1_bits.load_hints
+#define pcci_st_hints		pcci_info_1.pcci1_bits.store_hints
+#define pcci_ld_latency		pcci_info_1.pcci1_bits.load_latency
+#define pcci_st_latency		pcci_info_1.pcci1_bits.store_latency
+#define pcci_stride		pcci_info_1.pcci1_bits.stride
+#define pcci_line_size		pcci_info_1.pcci1_bits.line_size
+#define pcci_assoc		pcci_info_1.pcci1_bits.associativity
+#define pcci_cache_attr		pcci_info_1.pcci1_bits.at
+#define pcci_unified		pcci_info_1.pcci1_bits.u
+#define pcci_tag_msb		pcci_info_2.pcci2_bits.tag_ms_bit
+#define pcci_tag_lsb		pcci_info_2.pcci2_bits.tag_ls_bit
+#define pcci_alias_boundary	pcci_info_2.pcci2_bits.alias_boundary
+#define pcci_cache_size		pcci_info_2.pcci2_bits.cache_size
+
+
+
+/* Possible values for cache attributes */
+
+#define PAL_CACHE_ATTR_WT		0	/* Write through cache */
+#define PAL_CACHE_ATTR_WB		1	/* Write back cache */
+#define PAL_CACHE_ATTR_WT_OR_WB		2	/* Either write thru or write
+						 * back depending on TLB
+						 * memory attributes
+						 */
+
+
+/* Possible values for cache hints */
+
+#define PAL_CACHE_HINT_TEMP_1		0	/* Temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_1		1	/* Non-temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_ALL	3	/* Non-temporal all levels */
+
+/* Processor cache protection  information */
+typedef union pal_cache_protection_element_u {
+	u32			pcpi_data;
+	struct {
+		u32		data_bits	: 8, /* # data bits covered by
+						      * each unit of protection
+						      */
+
+				tagprot_lsb	: 6, /* Least -do- */
+				tagprot_msb	: 6, /* Most Sig. tag address
+						      * bit that this
+						      * protection covers.
+						      */
+				prot_bits	: 6, /* # of protection bits */
+				method		: 4, /* Protection method */
+				t_d		: 2; /* Indicates which part
+						      * of the cache this
+						      * protection encoding
+						      * applies.
+						      */
+	} pcp_info;
+} pal_cache_protection_element_t;
+
+#define pcpi_cache_prot_part	pcp_info.t_d
+#define pcpi_prot_method	pcp_info.method
+#define pcpi_prot_bits		pcp_info.prot_bits
+#define pcpi_tagprot_msb	pcp_info.tagprot_msb
+#define pcpi_tagprot_lsb	pcp_info.tagprot_lsb
+#define pcpi_data_bits		pcp_info.data_bits
+
+/* Processor cache part encodings */
+#define PAL_CACHE_PROT_PART_DATA	0	/* Data protection  */
+#define PAL_CACHE_PROT_PART_TAG		1	/* Tag  protection */
+#define PAL_CACHE_PROT_PART_TAG_DATA	2	/* Tag+data protection (tag is
+						 * more significant )
+						 */
+#define PAL_CACHE_PROT_PART_DATA_TAG	3	/* Data+tag protection (data is
+						 * more significant )
+						 */
+#define PAL_CACHE_PROT_PART_MAX		6
+
+
+typedef struct pal_cache_protection_info_s {
+	pal_status_t			pcpi_status;
+	pal_cache_protection_element_t	pcp_info[PAL_CACHE_PROT_PART_MAX];
+} pal_cache_protection_info_t;
+
+
+/* Processor cache protection method encodings */
+#define PAL_CACHE_PROT_METHOD_NONE		0	/* No protection */
+#define PAL_CACHE_PROT_METHOD_ODD_PARITY	1	/* Odd parity */
+#define PAL_CACHE_PROT_METHOD_EVEN_PARITY	2	/* Even parity */
+#define PAL_CACHE_PROT_METHOD_ECC		3	/* ECC protection */
+
+
+/* Processor cache line identification in the hierarchy */
+typedef union pal_cache_line_id_u {
+	u64			pclid_data;
+	struct {
+		u64		cache_type	: 8,	/* 7-0 cache type */
+				level		: 8,	/* 15-8 level of the
+							 * cache in the
+							 * hierarchy.
+							 */
+				way		: 8,	/* 23-16 way in the set
+							 */
+				part		: 8,	/* 31-24 part of the
+							 * cache
+							 */
+				reserved	: 32;	/* 63-32 is reserved*/
+	} pclid_info_read;
+	struct {
+		u64		cache_type	: 8,	/* 7-0 cache type */
+				level		: 8,	/* 15-8 level of the
+							 * cache in the
+							 * hierarchy.
+							 */
+				way		: 8,	/* 23-16 way in the set
+							 */
+				part		: 8,	/* 31-24 part of the
+							 * cache
+							 */
+				mesi		: 8,	/* 39-32 cache line
+							 * state
+							 */
+				start		: 8,	/* 47-40 lsb of data to
+							 * invert
+							 */
+				length		: 8,	/* 55-48 #bits to
+							 * invert
+							 */
+				trigger		: 8;	/* 63-56 Trigger error
+							 * by doing a load
+							 * after the write
+							 */
+
+	} pclid_info_write;
+} pal_cache_line_id_u_t;
+
+#define pclid_read_part		pclid_info_read.part
+#define pclid_read_way		pclid_info_read.way
+#define pclid_read_level	pclid_info_read.level
+#define pclid_read_cache_type	pclid_info_read.cache_type
+
+#define pclid_write_trigger	pclid_info_write.trigger
+#define pclid_write_length	pclid_info_write.length
+#define pclid_write_start	pclid_info_write.start
+#define pclid_write_mesi	pclid_info_write.mesi
+#define pclid_write_part	pclid_info_write.part
+#define pclid_write_way		pclid_info_write.way
+#define pclid_write_level	pclid_info_write.level
+#define pclid_write_cache_type	pclid_info_write.cache_type
+
+/* Processor cache line part encodings */
+#define PAL_CACHE_LINE_ID_PART_DATA		0	/* Data */
+#define PAL_CACHE_LINE_ID_PART_TAG		1	/* Tag */
+#define PAL_CACHE_LINE_ID_PART_DATA_PROT	2	/* Data protection */
+#define PAL_CACHE_LINE_ID_PART_TAG_PROT		3	/* Tag protection */
+#define PAL_CACHE_LINE_ID_PART_DATA_TAG_PROT	4	/* Data+tag
+							 * protection
+							 */
+typedef struct pal_cache_line_info_s {
+	pal_status_t		pcli_status;		/* Return status of the read cache line
+							 * info call.
+							 */
+	u64			pcli_data;		/* 64-bit data, tag, protection bits .. */
+	u64			pcli_data_len;		/* data length in bits */
+	pal_cache_line_state_t	pcli_cache_line_state;	/* mesi state */
+
+} pal_cache_line_info_t;
+
+
+/* Machine Check related crap */
+
+/* Pending event status bits  */
+typedef u64					pal_mc_pending_events_t;
+
+#define PAL_MC_PENDING_MCA			(1 << 0)
+#define PAL_MC_PENDING_INIT			(1 << 1)
+
+/* Error information type */
+typedef u64					pal_mc_info_index_t;
+
+#define PAL_MC_INFO_PROCESSOR			0	/* Processor */
+#define PAL_MC_INFO_CACHE_CHECK			1	/* Cache check */
+#define PAL_MC_INFO_TLB_CHECK			2	/* Tlb check */
+#define PAL_MC_INFO_BUS_CHECK			3	/* Bus check */
+#define PAL_MC_INFO_REQ_ADDR			4	/* Requestor address */
+#define PAL_MC_INFO_RESP_ADDR			5	/* Responder address */
+#define PAL_MC_INFO_TARGET_ADDR			6	/* Target address */
+#define PAL_MC_INFO_IMPL_DEP			7	/* Implementation
+							 * dependent
+							 */
+
+#define PAL_TLB_CHECK_OP_PURGE			8
+
+typedef struct pal_process_state_info_s {
+	u64		reserved1	: 2,
+			rz		: 1,	/* PAL_CHECK processor
+						 * rendezvous
+						 * successful.
+						 */
+
+			ra		: 1,	/* PAL_CHECK attempted
+						 * a rendezvous.
+						 */
+			me		: 1,	/* Distinct multiple
+						 * errors occurred
+						 */
+
+			mn		: 1,	/* Min. state save
+						 * area has been
+						 * registered with PAL
+						 */
+
+			sy		: 1,	/* Storage integrity
+						 * synched
+						 */
+
+
+			co		: 1,	/* Continuable */
+			ci		: 1,	/* MC isolated */
+			us		: 1,	/* Uncontained storage
+						 * damage.
+						 */
+
+
+			hd		: 1,	/* Non-essential hw
+						 * lost (no loss of
+						 * functionality)
+						 * causing the
+						 * processor to run in
+						 * degraded mode.
+						 */
+
+			tl		: 1,	/* 1 => MC occurred
+						 * after an instr was
+						 * executed but before
+						 * the trap that
+						 * resulted from instr
+						 * execution was
+						 * generated.
+						 * (Trap Lost )
+						 */
+			mi		: 1,	/* More information available
+						 * call PAL_MC_ERROR_INFO
+						 */
+			pi		: 1,	/* Precise instruction pointer */
+			pm		: 1,	/* Precise min-state save area */
+
+			dy		: 1,	/* Processor dynamic
+						 * state valid
+						 */
+
+
+			in		: 1,	/* 0 = MC, 1 = INIT */
+			rs		: 1,	/* RSE valid */
+			cm		: 1,	/* MC corrected */
+			ex		: 1,	/* MC is expected */
+			cr		: 1,	/* Control regs valid*/
+			pc		: 1,	/* Perf cntrs valid */
+			dr		: 1,	/* Debug regs valid */
+			tr		: 1,	/* Translation regs
+						 * valid
+						 */
+			rr		: 1,	/* Region regs valid */
+			ar		: 1,	/* App regs valid */
+			br		: 1,	/* Branch regs valid */
+			pr		: 1,	/* Predicate registers
+						 * valid
+						 */
+
+			fp		: 1,	/* fp registers valid*/
+			b1		: 1,	/* Preserved bank one
+						 * general registers
+						 * are valid
+						 */
+			b0		: 1,	/* Preserved bank zero
+						 * general registers
+						 * are valid
+						 */
+			gr		: 1,	/* General registers
+						 * are valid
+						 * (excl. banked regs)
+						 */
+			dsize		: 16,	/* size of dynamic
+						 * state returned
+						 * by the processor
+						 */
+
+			se		: 1,	/* Shared error.  MCA in a
+						   shared structure */
+			reserved2	: 10,
+			cc		: 1,	/* Cache check */
+			tc		: 1,	/* TLB check */
+			bc		: 1,	/* Bus check */
+			rc		: 1,	/* Register file check */
+			uc		: 1;	/* Uarch check */
+
+} pal_processor_state_info_t;
+
+typedef struct pal_cache_check_info_s {
+	u64		op		: 4,	/* Type of cache
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			level		: 2,	/* Cache level */
+			reserved1	: 2,
+			dl		: 1,	/* Failure in data part
+						 * of cache line
+						 */
+			tl		: 1,	/* Failure in tag part
+						 * of cache line
+						 */
+			dc		: 1,	/* Failure in dcache */
+			ic		: 1,	/* Failure in icache */
+			mesi		: 3,	/* Cache line state */
+			mv		: 1,	/* mesi valid */
+			way		: 5,	/* Way in which the
+						 * error occurred
+						 */
+			wiv		: 1,	/* Way field valid */
+			reserved2	: 1,
+			dp		: 1,	/* Data poisoned on MBE */
+			reserved3	: 6,
+			hlth		: 2,	/* Health indicator */
+
+			index		: 20,	/* Cache line index */
+			reserved4	: 2,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_cache_check_info_t;
+
+typedef struct pal_tlb_check_info_s {
+
+	u64		tr_slot		: 8,	/* Slot# of TR where
+						 * error occurred
+						 */
+			trv		: 1,	/* tr_slot field is valid */
+			reserved1	: 1,
+			level		: 2,	/* TLB level where failure occurred */
+			reserved2	: 4,
+			dtr		: 1,	/* Fail in data TR */
+			itr		: 1,	/* Fail in inst TR */
+			dtc		: 1,	/* Fail in data TC */
+			itc		: 1,	/* Fail in inst. TC */
+			op		: 4,	/* Cache operation */
+			reserved3	: 6,
+			hlth		: 2,	/* Health indicator */
+			reserved4	: 22,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_tlb_check_info_t;
+
+typedef struct pal_bus_check_info_s {
+	u64		size		: 5,	/* Xaction size */
+			ib		: 1,	/* Internal bus error */
+			eb		: 1,	/* External bus error */
+			cc		: 1,	/* Error occurred
+						 * during cache-cache
+						 * transfer.
+						 */
+			type		: 8,	/* Bus xaction type*/
+			sev		: 5,	/* Bus error severity*/
+			hier		: 2,	/* Bus hierarchy level */
+			dp		: 1,	/* Data poisoned on MBE */
+			bsi		: 8,	/* Bus error status
+						 * info
+						 */
+			reserved2	: 22,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_bus_check_info_t;
+
+typedef struct pal_reg_file_check_info_s {
+	u64		id		: 4,	/* Register file identifier */
+			op		: 4,	/* Type of register
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			reg_num		: 7,	/* Register number */
+			rnv		: 1,	/* reg_num valid */
+			reserved2	: 38,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			reserved3	: 3,
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_reg_file_check_info_t;
+
+typedef struct pal_uarch_check_info_s {
+	u64		sid		: 5,	/* Structure identification */
+			level		: 3,	/* Level of failure */
+			array_id	: 4,	/* Array identification */
+			op		: 4,	/* Type of
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			way		: 6,	/* Way of structure */
+			wv		: 1,	/* way valid */
+			xv		: 1,	/* index valid */
+			reserved1	: 6,
+			hlth		: 2,	/* Health indicator */
+			index		: 8,	/* Index or set of the uarch
+						 * structure that failed.
+						 */
+			reserved2	: 24,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_uarch_check_info_t;
+
+typedef union pal_mc_error_info_u {
+	u64				pmei_data;
+	pal_processor_state_info_t	pme_processor;
+	pal_cache_check_info_t		pme_cache;
+	pal_tlb_check_info_t		pme_tlb;
+	pal_bus_check_info_t		pme_bus;
+	pal_reg_file_check_info_t	pme_reg_file;
+	pal_uarch_check_info_t		pme_uarch;
+} pal_mc_error_info_t;
+
+#define pmci_proc_unknown_check			pme_processor.uc
+#define pmci_proc_bus_check			pme_processor.bc
+#define pmci_proc_tlb_check			pme_processor.tc
+#define pmci_proc_cache_check			pme_processor.cc
+#define pmci_proc_dynamic_state_size		pme_processor.dsize
+#define pmci_proc_gpr_valid			pme_processor.gr
+#define pmci_proc_preserved_bank0_gpr_valid	pme_processor.b0
+#define pmci_proc_preserved_bank1_gpr_valid	pme_processor.b1
+#define pmci_proc_fp_valid			pme_processor.fp
+#define pmci_proc_predicate_regs_valid		pme_processor.pr
+#define pmci_proc_branch_regs_valid		pme_processor.br
+#define pmci_proc_app_regs_valid		pme_processor.ar
+#define pmci_proc_region_regs_valid		pme_processor.rr
+#define pmci_proc_translation_regs_valid	pme_processor.tr
+#define pmci_proc_debug_regs_valid		pme_processor.dr
+#define pmci_proc_perf_counters_valid		pme_processor.pc
+#define pmci_proc_control_regs_valid		pme_processor.cr
+#define pmci_proc_machine_check_expected	pme_processor.ex
+#define pmci_proc_machine_check_corrected	pme_processor.cm
+#define pmci_proc_rse_valid			pme_processor.rs
+#define pmci_proc_machine_check_or_init		pme_processor.in
+#define pmci_proc_dynamic_state_valid		pme_processor.dy
+#define pmci_proc_operation			pme_processor.op
+#define pmci_proc_trap_lost			pme_processor.tl
+#define pmci_proc_hardware_damage		pme_processor.hd
+#define pmci_proc_uncontained_storage_damage	pme_processor.us
+#define pmci_proc_machine_check_isolated	pme_processor.ci
+#define pmci_proc_continuable			pme_processor.co
+#define pmci_proc_storage_intergrity_synced	pme_processor.sy
+#define pmci_proc_min_state_save_area_regd	pme_processor.mn
+#define	pmci_proc_distinct_multiple_errors	pme_processor.me
+#define pmci_proc_pal_attempted_rendezvous	pme_processor.ra
+#define pmci_proc_pal_rendezvous_complete	pme_processor.rz
+
+
+#define pmci_cache_level			pme_cache.level
+#define pmci_cache_line_state			pme_cache.mesi
+#define pmci_cache_line_state_valid		pme_cache.mv
+#define pmci_cache_line_index			pme_cache.index
+#define pmci_cache_instr_cache_fail		pme_cache.ic
+#define pmci_cache_data_cache_fail		pme_cache.dc
+#define pmci_cache_line_tag_fail		pme_cache.tl
+#define pmci_cache_line_data_fail		pme_cache.dl
+#define pmci_cache_operation			pme_cache.op
+#define pmci_cache_way_valid			pme_cache.wv
+#define pmci_cache_target_address_valid		pme_cache.tv
+#define pmci_cache_way				pme_cache.way
+#define pmci_cache_mc				pme_cache.mc
+
+#define pmci_tlb_instr_translation_cache_fail	pme_tlb.itc
+#define pmci_tlb_data_translation_cache_fail	pme_tlb.dtc
+#define pmci_tlb_instr_translation_reg_fail	pme_tlb.itr
+#define pmci_tlb_data_translation_reg_fail	pme_tlb.dtr
+#define pmci_tlb_translation_reg_slot		pme_tlb.tr_slot
+#define pmci_tlb_mc				pme_tlb.mc
+
+#define pmci_bus_status_info			pme_bus.bsi
+#define pmci_bus_req_address_valid		pme_bus.rq
+#define pmci_bus_resp_address_valid		pme_bus.rp
+#define pmci_bus_target_address_valid		pme_bus.tv
+#define pmci_bus_error_severity			pme_bus.sev
+#define pmci_bus_transaction_type		pme_bus.type
+#define pmci_bus_cache_cache_transfer		pme_bus.cc
+#define pmci_bus_transaction_size		pme_bus.size
+#define pmci_bus_internal_error			pme_bus.ib
+#define pmci_bus_external_error			pme_bus.eb
+#define pmci_bus_mc				pme_bus.mc
+
+/*
+ * NOTE: this min_state_save area struct only includes the 1KB
+ * architectural state save area.  The other 3 KB is scratch space
+ * for PAL.
+ */
+
+typedef struct pal_min_state_area_s {
+	u64	pmsa_nat_bits;		/* nat bits for saved GRs  */
+	u64	pmsa_gr[15];		/* GR1	- GR15		   */
+	u64	pmsa_bank0_gr[16];	/* GR16 - GR31		   */
+	u64	pmsa_bank1_gr[16];	/* GR16 - GR31		   */
+	u64	pmsa_pr;		/* predicate registers	   */
+	u64	pmsa_br0;		/* branch register 0	   */
+	u64	pmsa_rsc;		/* ar.rsc		   */
+	u64	pmsa_iip;		/* cr.iip		   */
+	u64	pmsa_ipsr;		/* cr.ipsr		   */
+	u64	pmsa_ifs;		/* cr.ifs		   */
+	u64	pmsa_xip;		/* previous iip		   */
+	u64	pmsa_xpsr;		/* previous psr		   */
+	u64	pmsa_xfs;		/* previous ifs		   */
+	u64	pmsa_br1;		/* branch register 1	   */
+	u64	pmsa_reserved[70];	/* pal_min_state_area should total to 1KB */
+} pal_min_state_area_t;
+
+
+struct ia64_pal_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+/*
+ * Note: Currently unused PAL arguments are generally labeled
+ * "reserved" so the value specified in the PAL documentation
+ * (generally 0) MUST be passed.  Reserved parameters are not optional
+ * parameters.
+ */
+extern struct ia64_pal_retval ia64_pal_call_static (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_stacked (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_static (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_stacked (u64, u64, u64, u64);
+extern void ia64_save_scratch_fpregs (struct ia64_fpreg *);
+extern void ia64_load_scratch_fpregs (struct ia64_fpreg *);
+
+#define PAL_CALL(iprv,a0,a1,a2,a3) do {			\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_static(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_STK(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_stacked(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_PHYS(iprv,a0,a1,a2,a3) do {			\
+	struct ia64_fpreg fr[6];				\
+	ia64_save_scratch_fpregs(fr);				\
+	iprv = ia64_pal_call_phys_static(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);				\
+} while (0)
+
+#define PAL_CALL_PHYS_STK(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];				\
+	ia64_save_scratch_fpregs(fr);				\
+	iprv = ia64_pal_call_phys_stacked(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);				\
+} while (0)
+
+typedef int (*ia64_pal_handler) (u64, ...);
+extern ia64_pal_handler ia64_pal;
+extern void ia64_pal_handler_init (void *);
+
+extern ia64_pal_handler ia64_pal;
+
+extern pal_cache_config_info_t		l0d_cache_config_info;
+extern pal_cache_config_info_t		l0i_cache_config_info;
+extern pal_cache_config_info_t		l1_cache_config_info;
+extern pal_cache_config_info_t		l2_cache_config_info;
+
+extern pal_cache_protection_info_t	l0d_cache_protection_info;
+extern pal_cache_protection_info_t	l0i_cache_protection_info;
+extern pal_cache_protection_info_t	l1_cache_protection_info;
+extern pal_cache_protection_info_t	l2_cache_protection_info;
+
+extern pal_cache_config_info_t		pal_cache_config_info_get(pal_cache_level_t,
+								  pal_cache_type_t);
+
+extern pal_cache_protection_info_t	pal_cache_protection_info_get(pal_cache_level_t,
+								      pal_cache_type_t);
+
+
+extern void				pal_error(int);
+
+
+/* Useful wrappers for the current list of pal procedures */
+
+typedef union pal_bus_features_u {
+	u64	pal_bus_features_val;
+	struct {
+		u64	pbf_reserved1				:	29;
+		u64	pbf_req_bus_parking			:	1;
+		u64	pbf_bus_lock_mask			:	1;
+		u64	pbf_enable_half_xfer_rate		:	1;
+		u64	pbf_reserved2				:	20;
+		u64	pbf_enable_shared_line_replace		:	1;
+		u64	pbf_enable_exclusive_line_replace	:	1;
+		u64	pbf_disable_xaction_queueing		:	1;
+		u64	pbf_disable_resp_err_check		:	1;
+		u64	pbf_disable_berr_check			:	1;
+		u64	pbf_disable_bus_req_internal_err_signal	:	1;
+		u64	pbf_disable_bus_req_berr_signal		:	1;
+		u64	pbf_disable_bus_init_event_check	:	1;
+		u64	pbf_disable_bus_init_event_signal	:	1;
+		u64	pbf_disable_bus_addr_err_check		:	1;
+		u64	pbf_disable_bus_addr_err_signal		:	1;
+		u64	pbf_disable_bus_data_err_check		:	1;
+	} pal_bus_features_s;
+} pal_bus_features_u_t;
+
+extern void pal_bus_features_print (u64);
+
+/* Provide information about configurable processor bus features */
+static inline s64
+ia64_pal_bus_get_features (pal_bus_features_u_t *features_avail,
+			   pal_bus_features_u_t *features_status,
+			   pal_bus_features_u_t *features_control)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_BUS_GET_FEATURES, 0, 0, 0);
+	if (features_avail)
+		features_avail->pal_bus_features_val = iprv.v0;
+	if (features_status)
+		features_status->pal_bus_features_val = iprv.v1;
+	if (features_control)
+		features_control->pal_bus_features_val = iprv.v2;
+	return iprv.status;
+}
+
+/* Enables/disables specific processor bus features */
+static inline s64
+ia64_pal_bus_set_features (pal_bus_features_u_t feature_select)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_BUS_SET_FEATURES, feature_select.pal_bus_features_val, 0, 0);
+	return iprv.status;
+}
+
+/* Get detailed cache information */
+static inline s64
+ia64_pal_cache_config_info (u64 cache_level, u64 cache_type, pal_cache_config_info_t *conf)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_INFO, cache_level, cache_type, 0);
+
+	if (iprv.status == 0) {
+		conf->pcci_status                 = iprv.status;
+		conf->pcci_info_1.pcci1_data      = iprv.v0;
+		conf->pcci_info_2.pcci2_data      = iprv.v1;
+		conf->pcci_reserved               = iprv.v2;
+	}
+	return iprv.status;
+
+}
+
+/* Get detailed cche protection information */
+static inline s64
+ia64_pal_cache_prot_info (u64 cache_level, u64 cache_type, pal_cache_protection_info_t *prot)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_PROT_INFO, cache_level, cache_type, 0);
+
+	if (iprv.status == 0) {
+		prot->pcpi_status           = iprv.status;
+		prot->pcp_info[0].pcpi_data = iprv.v0 & 0xffffffff;
+		prot->pcp_info[1].pcpi_data = iprv.v0 >> 32;
+		prot->pcp_info[2].pcpi_data = iprv.v1 & 0xffffffff;
+		prot->pcp_info[3].pcpi_data = iprv.v1 >> 32;
+		prot->pcp_info[4].pcpi_data = iprv.v2 & 0xffffffff;
+		prot->pcp_info[5].pcpi_data = iprv.v2 >> 32;
+	}
+	return iprv.status;
+}
+
+/*
+ * Flush the processor instruction or data caches.  *PROGRESS must be
+ * initialized to zero before calling this for the first time..
+ */
+static inline s64
+ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
+	if (vector)
+		*vector = iprv.v0;
+	*progress = iprv.v1;
+	return iprv.status;
+}
+
+
+/* Initialize the processor controlled caches */
+static inline s64
+ia64_pal_cache_init (u64 level, u64 cache_type, u64 rest)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_INIT, level, cache_type, rest);
+	return iprv.status;
+}
+
+/* Initialize the tags and data of a data or unified cache line of
+ * processor controlled cache to known values without the availability
+ * of backing memory.
+ */
+static inline s64
+ia64_pal_cache_line_init (u64 physical_addr, u64 data_value)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_LINE_INIT, physical_addr, data_value, 0);
+	return iprv.status;
+}
+
+
+/* Read the data and tag of a processor controlled cache line for diags */
+static inline s64
+ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_CACHE_READ, line_id.pclid_data,
+				physical_addr, 0);
+	return iprv.status;
+}
+
+/* Return summary information about the hierarchy of caches controlled by the processor */
+static inline s64
+ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0);
+	if (cache_levels)
+		*cache_levels = iprv.v0;
+	if (unique_caches)
+		*unique_caches = iprv.v1;
+	return iprv.status;
+}
+
+/* Write the data and tag of a processor-controlled cache line for diags */
+static inline s64
+ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_CACHE_WRITE, line_id.pclid_data,
+				physical_addr, data);
+	return iprv.status;
+}
+
+
+/* Return the parameters needed to copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_info (u64 copy_type, u64 num_procs, u64 num_iopics,
+		    u64 *buffer_size, u64 *buffer_align)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_COPY_INFO, copy_type, num_procs, num_iopics);
+	if (buffer_size)
+		*buffer_size = iprv.v0;
+	if (buffer_align)
+		*buffer_align = iprv.v1;
+	return iprv.status;
+}
+
+/* Copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc_offset)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_COPY_PAL, target_addr, alloc_size, processor);
+	if (pal_proc_offset)
+		*pal_proc_offset = iprv.v0;
+	return iprv.status;
+}
+
+/* Return the number of instruction and data debug register pairs */
+static inline s64
+ia64_pal_debug_info (u64 *inst_regs,  u64 *data_regs)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0);
+	if (inst_regs)
+		*inst_regs = iprv.v0;
+	if (data_regs)
+		*data_regs = iprv.v1;
+
+	return iprv.status;
+}
+
+#ifdef TBD
+/* Switch from IA64-system environment to IA-32 system environment */
+static inline s64
+ia64_pal_enter_ia32_env (ia32_env1, ia32_env2, ia32_env3)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_ENTER_IA_32_ENV, ia32_env1, ia32_env2, ia32_env3);
+	return iprv.status;
+}
+#endif
+
+/* Get unique geographical address of this processor on its bus */
+static inline s64
+ia64_pal_fixed_addr (u64 *global_unique_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FIXED_ADDR, 0, 0, 0);
+	if (global_unique_addr)
+		*global_unique_addr = iprv.v0;
+	return iprv.status;
+}
+
+/* Get base frequency of the platform if generated by the processor */
+static inline s64
+ia64_pal_freq_base (u64 *platform_base_freq)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0);
+	if (platform_base_freq)
+		*platform_base_freq = iprv.v0;
+	return iprv.status;
+}
+
+/*
+ * Get the ratios for processor frequency, bus frequency and interval timer to
+ * to base frequency of the platform
+ */
+static inline s64
+ia64_pal_freq_ratios (struct pal_freq_ratio *proc_ratio, struct pal_freq_ratio *bus_ratio,
+		      struct pal_freq_ratio *itc_ratio)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FREQ_RATIOS, 0, 0, 0);
+	if (proc_ratio)
+		*(u64 *)proc_ratio = iprv.v0;
+	if (bus_ratio)
+		*(u64 *)bus_ratio = iprv.v1;
+	if (itc_ratio)
+		*(u64 *)itc_ratio = iprv.v2;
+	return iprv.status;
+}
+
+/*
+ * Get the current hardware resource sharing policy of the processor
+ */
+static inline s64
+ia64_pal_get_hw_policy (u64 proc_num, u64 *cur_policy, u64 *num_impacted,
+			u64 *la)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_GET_HW_POLICY, proc_num, 0, 0);
+	if (cur_policy)
+		*cur_policy = iprv.v0;
+	if (num_impacted)
+		*num_impacted = iprv.v1;
+	if (la)
+		*la = iprv.v2;
+	return iprv.status;
+}
+
+/* Make the processor enter HALT or one of the implementation dependent low
+ * power states where prefetching and execution are suspended and cache and
+ * TLB coherency is not maintained.
+ */
+static inline s64
+ia64_pal_halt (u64 halt_state)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_HALT, halt_state, 0, 0);
+	return iprv.status;
+}
+
+typedef union pal_power_mgmt_info_u {
+	u64			ppmi_data;
+	struct {
+	       u64		exit_latency		: 16,
+				entry_latency		: 16,
+				power_consumption	: 28,
+				im			: 1,
+				co			: 1,
+				reserved		: 2;
+	} pal_power_mgmt_info_s;
+} pal_power_mgmt_info_u_t;
+
+/* Return information about processor's optional power management capabilities. */
+static inline s64
+ia64_pal_halt_info (pal_power_mgmt_info_u_t *power_buf)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0);
+	return iprv.status;
+}
+
+/* Get the current P-state information */
+static inline s64
+ia64_pal_get_pstate (u64 *pstate_index, unsigned long type)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_GET_PSTATE, type, 0, 0);
+	*pstate_index = iprv.v0;
+	return iprv.status;
+}
+
+/* Set the P-state */
+static inline s64
+ia64_pal_set_pstate (u64 pstate_index)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_SET_PSTATE, pstate_index, 0, 0);
+	return iprv.status;
+}
+
+/* Processor branding information*/
+static inline s64
+ia64_pal_get_brand_info (char *brand_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_BRAND_INFO, 0, (u64)brand_info, 0);
+	return iprv.status;
+}
+
+/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are
+ * suspended, but cache and TLB coherency is maintained.
+ */
+static inline s64
+ia64_pal_halt_light (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_HALT_LIGHT, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Clear all the processor error logging   registers and reset the indicator that allows
+ * the error logging registers to be written. This procedure also checks the pending
+ * machine check bit and pending INIT bit and reports their states.
+ */
+static inline s64
+ia64_pal_mc_clear_log (u64 *pending_vector)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_CLEAR_LOG, 0, 0, 0);
+	if (pending_vector)
+		*pending_vector = iprv.v0;
+	return iprv.status;
+}
+
+/* Ensure that all outstanding transactions in a processor are completed or that any
+ * MCA due to thes outstanding transaction is taken.
+ */
+static inline s64
+ia64_pal_mc_drain (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_DRAIN, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Return the machine check dynamic processor state */
+static inline s64
+ia64_pal_mc_dynamic_state (u64 info_type, u64 dy_buffer, u64 *size)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, info_type, dy_buffer, 0);
+	if (size)
+		*size = iprv.v0;
+	return iprv.status;
+}
+
+/* Return processor machine check information */
+static inline s64
+ia64_pal_mc_error_info (u64 info_index, u64 type_index, u64 *size, u64 *error_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_ERROR_INFO, info_index, type_index, 0);
+	if (size)
+		*size = iprv.v0;
+	if (error_info)
+		*error_info = iprv.v1;
+	return iprv.status;
+}
+
+/* Injects the requested processor error or returns info on
+ * supported injection capabilities for current processor implementation
+ */
+static inline s64
+ia64_pal_mc_error_inject_phys (u64 err_type_info, u64 err_struct_info,
+			u64 err_data_buffer, u64 *capabilities, u64 *resources)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info,
+			  err_struct_info, err_data_buffer);
+	if (capabilities)
+		*capabilities= iprv.v0;
+	if (resources)
+		*resources= iprv.v1;
+	return iprv.status;
+}
+
+static inline s64
+ia64_pal_mc_error_inject_virt (u64 err_type_info, u64 err_struct_info,
+			u64 err_data_buffer, u64 *capabilities, u64 *resources)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info,
+			  err_struct_info, err_data_buffer);
+	if (capabilities)
+		*capabilities= iprv.v0;
+	if (resources)
+		*resources= iprv.v1;
+	return iprv.status;
+}
+
+/* Inform PALE_CHECK whether a machine check is expected so that PALE_CHECK willnot
+ * attempt to correct any expected machine checks.
+ */
+static inline s64
+ia64_pal_mc_expected (u64 expected, u64 *previous)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_EXPECTED, expected, 0, 0);
+	if (previous)
+		*previous = iprv.v0;
+	return iprv.status;
+}
+
+typedef union pal_hw_tracking_u {
+	u64			pht_data;
+	struct {
+		u64		itc	:4,	/* Instruction cache tracking */
+				dct	:4,	/* Date cache tracking */
+				itt	:4,	/* Instruction TLB tracking */
+				ddt	:4,	/* Data TLB tracking */
+				reserved:48;
+	} pal_hw_tracking_s;
+} pal_hw_tracking_u_t;
+
+/*
+ * Hardware tracking status.
+ */
+static inline s64
+ia64_pal_mc_hw_tracking (u64 *status)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_HW_TRACKING, 0, 0, 0);
+	if (status)
+		*status = iprv.v0;
+	return iprv.status;
+}
+
+/* Register a platform dependent location with PAL to which it can save
+ * minimal processor state in the event of a machine check or initialization
+ * event.
+ */
+static inline s64
+ia64_pal_mc_register_mem (u64 physical_addr, u64 size, u64 *req_size)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, size, 0);
+	if (req_size)
+		*req_size = iprv.v0;
+	return iprv.status;
+}
+
+/* Restore minimal architectural processor state, set CMC interrupt if necessary
+ * and resume execution
+ */
+static inline s64
+ia64_pal_mc_resume (u64 set_cmci, u64 save_ptr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_RESUME, set_cmci, save_ptr, 0);
+	return iprv.status;
+}
+
+/* Return the memory attributes implemented by the processor */
+static inline s64
+ia64_pal_mem_attrib (u64 *mem_attrib)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MEM_ATTRIB, 0, 0, 0);
+	if (mem_attrib)
+		*mem_attrib = iprv.v0 & 0xff;
+	return iprv.status;
+}
+
+/* Return the amount of memory needed for second phase of processor
+ * self-test and the required alignment of memory.
+ */
+static inline s64
+ia64_pal_mem_for_test (u64 *bytes_needed, u64 *alignment)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MEM_FOR_TEST, 0, 0, 0);
+	if (bytes_needed)
+		*bytes_needed = iprv.v0;
+	if (alignment)
+		*alignment = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_perf_mon_info_u {
+	u64			  ppmi_data;
+	struct {
+	       u64		generic		: 8,
+				width		: 8,
+				cycles		: 8,
+				retired		: 8,
+				reserved	: 32;
+	} pal_perf_mon_info_s;
+} pal_perf_mon_info_u_t;
+
+/* Return the performance monitor information about what can be counted
+ * and how to configure the monitors to count the desired events.
+ */
+static inline s64
+ia64_pal_perf_mon_info (u64 *pm_buffer, pal_perf_mon_info_u_t *pm_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PERF_MON_INFO, (unsigned long) pm_buffer, 0, 0);
+	if (pm_info)
+		pm_info->ppmi_data = iprv.v0;
+	return iprv.status;
+}
+
+/* Specifies the physical address of the processor interrupt block
+ * and I/O port space.
+ */
+static inline s64
+ia64_pal_platform_addr (u64 type, u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PLATFORM_ADDR, type, physical_addr, 0);
+	return iprv.status;
+}
+
+/* Set the SAL PMI entrypoint in memory */
+static inline s64
+ia64_pal_pmi_entrypoint (u64 sal_pmi_entry_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PMI_ENTRYPOINT, sal_pmi_entry_addr, 0, 0);
+	return iprv.status;
+}
+
+struct pal_features_s;
+/* Provide information about configurable processor features */
+static inline s64
+ia64_pal_proc_get_features (u64 *features_avail,
+			    u64 *features_status,
+			    u64 *features_control,
+			    u64 features_set)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, features_set, 0);
+	if (iprv.status == 0) {
+		*features_avail   = iprv.v0;
+		*features_status  = iprv.v1;
+		*features_control = iprv.v2;
+	}
+	return iprv.status;
+}
+
+/* Enable/disable processor dependent features */
+static inline s64
+ia64_pal_proc_set_features (u64 feature_select)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, feature_select, 0, 0);
+	return iprv.status;
+}
+
+/*
+ * Put everything in a struct so we avoid the global offset table whenever
+ * possible.
+ */
+typedef struct ia64_ptce_info_s {
+	u64		base;
+	u32		count[2];
+	u32		stride[2];
+} ia64_ptce_info_t;
+
+/* Return the information required for the architected loop used to purge
+ * (initialize) the entire TC
+ */
+static inline s64
+ia64_get_ptce (ia64_ptce_info_t *ptce)
+{
+	struct ia64_pal_retval iprv;
+
+	if (!ptce)
+		return -1;
+
+	PAL_CALL(iprv, PAL_PTCE_INFO, 0, 0, 0);
+	if (iprv.status == 0) {
+		ptce->base = iprv.v0;
+		ptce->count[0] = iprv.v1 >> 32;
+		ptce->count[1] = iprv.v1 & 0xffffffff;
+		ptce->stride[0] = iprv.v2 >> 32;
+		ptce->stride[1] = iprv.v2 & 0xffffffff;
+	}
+	return iprv.status;
+}
+
+/* Return info about implemented application and control registers. */
+static inline s64
+ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_REGISTER_INFO, info_request, 0, 0);
+	if (reg_info_1)
+		*reg_info_1 = iprv.v0;
+	if (reg_info_2)
+		*reg_info_2 = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_hints_u {
+	u64			ph_data;
+	struct {
+	       u64		si		: 1,
+				li		: 1,
+				reserved	: 62;
+	} pal_hints_s;
+} pal_hints_u_t;
+
+/* Return information about the register stack and RSE for this processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0);
+	if (num_phys_stacked)
+		*num_phys_stacked = iprv.v0;
+	if (hints)
+		hints->ph_data = iprv.v1;
+	return iprv.status;
+}
+
+/*
+ * Set the current hardware resource sharing policy of the processor
+ */
+static inline s64
+ia64_pal_set_hw_policy (u64 policy)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_SET_HW_POLICY, policy, 0, 0);
+	return iprv.status;
+}
+
+/* Cause the processor to enter	SHUTDOWN state, where prefetching and execution are
+ * suspended, but cause cache and TLB coherency to be maintained.
+ * This is usually called in IA-32 mode.
+ */
+static inline s64
+ia64_pal_shutdown (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_SHUTDOWN, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Perform the second phase of processor self-test. */
+static inline s64
+ia64_pal_test_proc (u64 test_addr, u64 test_size, u64 attributes, u64 *self_test_state)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_TEST_PROC, test_addr, test_size, attributes);
+	if (self_test_state)
+		*self_test_state = iprv.v0;
+	return iprv.status;
+}
+
+typedef union  pal_version_u {
+	u64	pal_version_val;
+	struct {
+		u64	pv_pal_b_rev		:	8;
+		u64	pv_pal_b_model		:	8;
+		u64	pv_reserved1		:	8;
+		u64	pv_pal_vendor		:	8;
+		u64	pv_pal_a_rev		:	8;
+		u64	pv_pal_a_model		:	8;
+		u64	pv_reserved2		:	16;
+	} pal_version_s;
+} pal_version_u_t;
+
+
+/*
+ * Return PAL version information.  While the documentation states that
+ * PAL_VERSION can be called in either physical or virtual mode, some
+ * implementations only allow physical calls.  We don't call it very often,
+ * so the overhead isn't worth eliminating.
+ */
+static inline s64
+ia64_pal_version (pal_version_u_t *pal_min_version, pal_version_u_t *pal_cur_version)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_VERSION, 0, 0, 0);
+	if (pal_min_version)
+		pal_min_version->pal_version_val = iprv.v0;
+
+	if (pal_cur_version)
+		pal_cur_version->pal_version_val = iprv.v1;
+
+	return iprv.status;
+}
+
+typedef union pal_tc_info_u {
+	u64			pti_val;
+	struct {
+	       u64		num_sets	:	8,
+				associativity	:	8,
+				num_entries	:	16,
+				pf		:	1,
+				unified		:	1,
+				reduce_tr	:	1,
+				reserved	:	29;
+	} pal_tc_info_s;
+} pal_tc_info_u_t;
+
+#define tc_reduce_tr		pal_tc_info_s.reduce_tr
+#define tc_unified		pal_tc_info_s.unified
+#define tc_pf			pal_tc_info_s.pf
+#define tc_num_entries		pal_tc_info_s.num_entries
+#define tc_associativity	pal_tc_info_s.associativity
+#define tc_num_sets		pal_tc_info_s.num_sets
+
+
+/* Return information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_info (u64 tc_level, u64 tc_type,  pal_tc_info_u_t *tc_info, u64 *tc_pages)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_INFO, tc_level, tc_type, 0);
+	if (tc_info)
+		tc_info->pti_val = iprv.v0;
+	if (tc_pages)
+		*tc_pages = iprv.v1;
+	return iprv.status;
+}
+
+/* Get page size information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0);
+	if (tr_pages)
+		*tr_pages = iprv.v0;
+	if (vw_pages)
+		*vw_pages = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_vm_info_1_u {
+	u64			pvi1_val;
+	struct {
+		u64		vw		: 1,
+				phys_add_size	: 7,
+				key_size	: 8,
+				max_pkr		: 8,
+				hash_tag_id	: 8,
+				max_dtr_entry	: 8,
+				max_itr_entry	: 8,
+				max_unique_tcs	: 8,
+				num_tc_levels	: 8;
+	} pal_vm_info_1_s;
+} pal_vm_info_1_u_t;
+
+#define PAL_MAX_PURGES		0xFFFF		/* all ones is means unlimited */
+
+typedef union pal_vm_info_2_u {
+	u64			pvi2_val;
+	struct {
+		u64		impl_va_msb	: 8,
+				rid_size	: 8,
+				max_purges	: 16,
+				reserved	: 32;
+	} pal_vm_info_2_s;
+} pal_vm_info_2_u_t;
+
+/* Get summary information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_summary (pal_vm_info_1_u_t *vm_info_1, pal_vm_info_2_u_t *vm_info_2)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_SUMMARY, 0, 0, 0);
+	if (vm_info_1)
+		vm_info_1->pvi1_val = iprv.v0;
+	if (vm_info_2)
+		vm_info_2->pvi2_val = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_vp_info_u {
+	u64			pvi_val;
+	struct {
+		u64		index:		48,	/* virtual feature set info */
+				vmm_id:		16;	/* feature set id */
+	} pal_vp_info_s;
+} pal_vp_info_u_t;
+
+/*
+ * Returns infomation about virtual processor features
+ */
+static inline s64
+ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VP_INFO, feature_set, vp_buffer, 0);
+	if (vp_info)
+		*vp_info = iprv.v0;
+	if (vmm_id)
+		*vmm_id = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_itr_valid_u {
+	u64			piv_val;
+	struct {
+	       u64		access_rights_valid	: 1,
+				priv_level_valid	: 1,
+				dirty_bit_valid		: 1,
+				mem_attr_valid		: 1,
+				reserved		: 60;
+	} pal_tr_valid_s;
+} pal_tr_valid_u_t;
+
+/* Read a translation register */
+static inline s64
+ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
+	if (tr_valid)
+		tr_valid->piv_val = iprv.v0;
+	return iprv.status;
+}
+
+/*
+ * PAL_PREFETCH_VISIBILITY transaction types
+ */
+#define PAL_VISIBILITY_VIRTUAL		0
+#define PAL_VISIBILITY_PHYSICAL		1
+
+/*
+ * PAL_PREFETCH_VISIBILITY return codes
+ */
+#define PAL_VISIBILITY_OK		1
+#define PAL_VISIBILITY_OK_REMOTE_NEEDED	0
+#define PAL_VISIBILITY_INVAL_ARG	-2
+#define PAL_VISIBILITY_ERROR		-3
+
+static inline s64
+ia64_pal_prefetch_visibility (s64 trans_type)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PREFETCH_VISIBILITY, trans_type, 0, 0);
+	return iprv.status;
+}
+
+/* data structure for getting information on logical to physical mappings */
+typedef union pal_log_overview_u {
+	struct {
+		u64	num_log		:16,	/* Total number of logical
+						 * processors on this die
+						 */
+			tpc		:8,	/* Threads per core */
+			reserved3	:8,	/* Reserved */
+			cpp		:8,	/* Cores per processor */
+			reserved2	:8,	/* Reserved */
+			ppid		:8,	/* Physical processor ID */
+			reserved1	:8;	/* Reserved */
+	} overview_bits;
+	u64 overview_data;
+} pal_log_overview_t;
+
+typedef union pal_proc_n_log_info1_u{
+	struct {
+		u64	tid		:16,	/* Thread id */
+			reserved2	:16,	/* Reserved */
+			cid		:16,	/* Core id */
+			reserved1	:16;	/* Reserved */
+	} ppli1_bits;
+	u64	ppli1_data;
+} pal_proc_n_log_info1_t;
+
+typedef union pal_proc_n_log_info2_u {
+	struct {
+		u64	la		:16,	/* Logical address */
+			reserved	:48;	/* Reserved */
+	} ppli2_bits;
+	u64	ppli2_data;
+} pal_proc_n_log_info2_t;
+
+typedef struct pal_logical_to_physical_s
+{
+	pal_log_overview_t overview;
+	pal_proc_n_log_info1_t ppli1;
+	pal_proc_n_log_info2_t ppli2;
+} pal_logical_to_physical_t;
+
+#define overview_num_log	overview.overview_bits.num_log
+#define overview_tpc		overview.overview_bits.tpc
+#define overview_cpp		overview.overview_bits.cpp
+#define overview_ppid		overview.overview_bits.ppid
+#define log1_tid		ppli1.ppli1_bits.tid
+#define log1_cid		ppli1.ppli1_bits.cid
+#define log2_la			ppli2.ppli2_bits.la
+
+/* Get information on logical to physical processor mappings. */
+static inline s64
+ia64_pal_logical_to_phys(u64 proc_number, pal_logical_to_physical_t *mapping)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_LOGICAL_TO_PHYSICAL, proc_number, 0, 0);
+
+	if (iprv.status == PAL_STATUS_SUCCESS)
+	{
+		mapping->overview.overview_data = iprv.v0;
+		mapping->ppli1.ppli1_data = iprv.v1;
+		mapping->ppli2.ppli2_data = iprv.v2;
+	}
+
+	return iprv.status;
+}
+
+typedef struct pal_cache_shared_info_s
+{
+	u64 num_shared;
+	pal_proc_n_log_info1_t ppli1;
+	pal_proc_n_log_info2_t ppli2;
+} pal_cache_shared_info_t;
+
+/* Get information on logical to physical processor mappings. */
+static inline s64
+ia64_pal_cache_shared_info(u64 level,
+		u64 type,
+		u64 proc_number,
+		pal_cache_shared_info_t *info)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_SHARED_INFO, level, type, proc_number);
+
+	if (iprv.status == PAL_STATUS_SUCCESS) {
+		info->num_shared = iprv.v0;
+		info->ppli1.ppli1_data = iprv.v1;
+		info->ppli2.ppli2_data = iprv.v2;
+	}
+
+	return iprv.status;
+}
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PAL_H */
diff --git a/arch/ia64/include/asm/param.h b/arch/ia64/include/asm/param.h
new file mode 100644
index 00000000000..0964c32c135
--- /dev/null
+++ b/arch/ia64/include/asm/param.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_IA64_PARAM_H
+#define _ASM_IA64_PARAM_H
+
+/*
+ * Fundamental kernel parameters.
+ *
+ * Based on <asm-i386/param.h>.
+ *
+ * Modified 1998, 1999, 2002-2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define EXEC_PAGESIZE	65536
+
+#ifndef NOGROUP
+# define NOGROUP	(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ
+# define USER_HZ	HZ
+# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
+#else
+   /*
+    * Technically, this is wrong, but some old apps still refer to it.  The proper way to
+    * get the HZ value is via sysconf(_SC_CLK_TCK).
+    */
+# define HZ 1024
+#endif
+
+#endif /* _ASM_IA64_PARAM_H */
diff --git a/arch/ia64/include/asm/paravirt.h b/arch/ia64/include/asm/paravirt.h
new file mode 100644
index 00000000000..660cab04483
--- /dev/null
+++ b/arch/ia64/include/asm/paravirt.h
@@ -0,0 +1,253 @@
+/******************************************************************************
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+
+#ifndef __ASM_PARAVIRT_H
+#define __ASM_PARAVIRT_H
+
+#ifdef CONFIG_PARAVIRT_GUEST
+
+#define PARAVIRT_HYPERVISOR_TYPE_DEFAULT	0
+#define PARAVIRT_HYPERVISOR_TYPE_XEN		1
+
+#ifndef __ASSEMBLY__
+
+#include <asm/hw_irq.h>
+#include <asm/meminit.h>
+
+/******************************************************************************
+ * general info
+ */
+struct pv_info {
+	unsigned int kernel_rpl;
+	int paravirt_enabled;
+	const char *name;
+};
+
+extern struct pv_info pv_info;
+
+static inline int paravirt_enabled(void)
+{
+	return pv_info.paravirt_enabled;
+}
+
+static inline unsigned int get_kernel_rpl(void)
+{
+	return pv_info.kernel_rpl;
+}
+
+/******************************************************************************
+ * initialization hooks.
+ */
+struct rsvd_region;
+
+struct pv_init_ops {
+	void (*banner)(void);
+
+	int (*reserve_memory)(struct rsvd_region *region);
+
+	void (*arch_setup_early)(void);
+	void (*arch_setup_console)(char **cmdline_p);
+	int (*arch_setup_nomca)(void);
+
+	void (*post_smp_prepare_boot_cpu)(void);
+};
+
+extern struct pv_init_ops pv_init_ops;
+
+static inline void paravirt_banner(void)
+{
+	if (pv_init_ops.banner)
+		pv_init_ops.banner();
+}
+
+static inline int paravirt_reserve_memory(struct rsvd_region *region)
+{
+	if (pv_init_ops.reserve_memory)
+		return pv_init_ops.reserve_memory(region);
+	return 0;
+}
+
+static inline void paravirt_arch_setup_early(void)
+{
+	if (pv_init_ops.arch_setup_early)
+		pv_init_ops.arch_setup_early();
+}
+
+static inline void paravirt_arch_setup_console(char **cmdline_p)
+{
+	if (pv_init_ops.arch_setup_console)
+		pv_init_ops.arch_setup_console(cmdline_p);
+}
+
+static inline int paravirt_arch_setup_nomca(void)
+{
+	if (pv_init_ops.arch_setup_nomca)
+		return pv_init_ops.arch_setup_nomca();
+	return 0;
+}
+
+static inline void paravirt_post_smp_prepare_boot_cpu(void)
+{
+	if (pv_init_ops.post_smp_prepare_boot_cpu)
+		pv_init_ops.post_smp_prepare_boot_cpu();
+}
+
+/******************************************************************************
+ * replacement of iosapic operations.
+ */
+
+struct pv_iosapic_ops {
+	void (*pcat_compat_init)(void);
+
+	struct irq_chip *(*get_irq_chip)(unsigned long trigger);
+
+	unsigned int (*__read)(char __iomem *iosapic, unsigned int reg);
+	void (*__write)(char __iomem *iosapic, unsigned int reg, u32 val);
+};
+
+extern struct pv_iosapic_ops pv_iosapic_ops;
+
+static inline void
+iosapic_pcat_compat_init(void)
+{
+	if (pv_iosapic_ops.pcat_compat_init)
+		pv_iosapic_ops.pcat_compat_init();
+}
+
+static inline struct irq_chip*
+iosapic_get_irq_chip(unsigned long trigger)
+{
+	return pv_iosapic_ops.get_irq_chip(trigger);
+}
+
+static inline unsigned int
+__iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	return pv_iosapic_ops.__read(iosapic, reg);
+}
+
+static inline void
+__iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	return pv_iosapic_ops.__write(iosapic, reg, val);
+}
+
+/******************************************************************************
+ * replacement of irq operations.
+ */
+
+struct pv_irq_ops {
+	void (*register_ipi)(void);
+
+	int (*assign_irq_vector)(int irq);
+	void (*free_irq_vector)(int vector);
+
+	void (*register_percpu_irq)(ia64_vector vec,
+				    struct irqaction *action);
+
+	void (*resend_irq)(unsigned int vector);
+};
+
+extern struct pv_irq_ops pv_irq_ops;
+
+static inline void
+ia64_register_ipi(void)
+{
+	pv_irq_ops.register_ipi();
+}
+
+static inline int
+assign_irq_vector(int irq)
+{
+	return pv_irq_ops.assign_irq_vector(irq);
+}
+
+static inline void
+free_irq_vector(int vector)
+{
+	return pv_irq_ops.free_irq_vector(vector);
+}
+
+static inline void
+register_percpu_irq(ia64_vector vec, struct irqaction *action)
+{
+	pv_irq_ops.register_percpu_irq(vec, action);
+}
+
+static inline void
+ia64_resend_irq(unsigned int vector)
+{
+	pv_irq_ops.resend_irq(vector);
+}
+
+/******************************************************************************
+ * replacement of time operations.
+ */
+
+extern struct itc_jitter_data_t itc_jitter_data;
+extern volatile int time_keeper_id;
+
+struct pv_time_ops {
+	void (*init_missing_ticks_accounting)(int cpu);
+	int (*do_steal_accounting)(unsigned long *new_itm);
+
+	void (*clocksource_resume)(void);
+};
+
+extern struct pv_time_ops pv_time_ops;
+
+static inline void
+paravirt_init_missing_ticks_accounting(int cpu)
+{
+	if (pv_time_ops.init_missing_ticks_accounting)
+		pv_time_ops.init_missing_ticks_accounting(cpu);
+}
+
+static inline int
+paravirt_do_steal_accounting(unsigned long *new_itm)
+{
+	return pv_time_ops.do_steal_accounting(new_itm);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else
+/* fallback for native case */
+
+#ifndef __ASSEMBLY__
+
+#define paravirt_banner()				do { } while (0)
+#define paravirt_reserve_memory(region)			0
+
+#define paravirt_arch_setup_early()			do { } while (0)
+#define paravirt_arch_setup_console(cmdline_p)		do { } while (0)
+#define paravirt_arch_setup_nomca()			0
+#define paravirt_post_smp_prepare_boot_cpu()		do { } while (0)
+
+#define paravirt_init_missing_ticks_accounting(cpu)	do { } while (0)
+#define paravirt_do_steal_accounting(new_itm)		0
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* CONFIG_PARAVIRT_GUEST */
+
+#endif /* __ASM_PARAVIRT_H */
diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
new file mode 100644
index 00000000000..d577aac1183
--- /dev/null
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -0,0 +1,112 @@
+/******************************************************************************
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ASM_IA64_PARAVIRT_PRIVOP_H
+#define _ASM_IA64_PARAVIRT_PRIVOP_H
+
+#ifdef CONFIG_PARAVIRT
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/kregs.h> /* for IA64_PSR_I */
+
+/******************************************************************************
+ * replacement of intrinsics operations.
+ */
+
+struct pv_cpu_ops {
+	void (*fc)(unsigned long addr);
+	unsigned long (*thash)(unsigned long addr);
+	unsigned long (*get_cpuid)(int index);
+	unsigned long (*get_pmd)(int index);
+	unsigned long (*getreg)(int reg);
+	void (*setreg)(int reg, unsigned long val);
+	void (*ptcga)(unsigned long addr, unsigned long size);
+	unsigned long (*get_rr)(unsigned long index);
+	void (*set_rr)(unsigned long index, unsigned long val);
+	void (*set_rr0_to_rr4)(unsigned long val0, unsigned long val1,
+			       unsigned long val2, unsigned long val3,
+			       unsigned long val4);
+	void (*ssm_i)(void);
+	void (*rsm_i)(void);
+	unsigned long (*get_psr_i)(void);
+	void (*intrin_local_irq_restore)(unsigned long flags);
+};
+
+extern struct pv_cpu_ops pv_cpu_ops;
+
+extern void ia64_native_setreg_func(int regnum, unsigned long val);
+extern unsigned long ia64_native_getreg_func(int regnum);
+
+/************************************************/
+/* Instructions paravirtualized for performance */
+/************************************************/
+
+/* mask for ia64_native_ssm/rsm() must be constant.("i" constraing).
+ * static inline function doesn't satisfy it. */
+#define paravirt_ssm(mask)			\
+	do {					\
+		if ((mask) == IA64_PSR_I)	\
+			pv_cpu_ops.ssm_i();	\
+		else				\
+			ia64_native_ssm(mask);	\
+	} while (0)
+
+#define paravirt_rsm(mask)			\
+	do {					\
+		if ((mask) == IA64_PSR_I)	\
+			pv_cpu_ops.rsm_i();	\
+		else				\
+			ia64_native_rsm(mask);	\
+	} while (0)
+
+/******************************************************************************
+ * replacement of hand written assembly codes.
+ */
+struct pv_cpu_asm_switch {
+	unsigned long switch_to;
+	unsigned long leave_syscall;
+	unsigned long work_processed_syscall;
+	unsigned long leave_kernel;
+};
+void paravirt_cpu_asm_init(const struct pv_cpu_asm_switch *cpu_asm_switch);
+
+#endif /* __ASSEMBLY__ */
+
+#define IA64_PARAVIRT_ASM_FUNC(name)	paravirt_ ## name
+
+#else
+
+/* fallback for native case */
+#define IA64_PARAVIRT_ASM_FUNC(name)	ia64_native_ ## name
+
+#endif /* CONFIG_PARAVIRT */
+
+/* these routines utilize privilege-sensitive or performance-sensitive
+ * privileged instructions so the code must be replaced with
+ * paravirtualized versions */
+#define ia64_switch_to			IA64_PARAVIRT_ASM_FUNC(switch_to)
+#define ia64_leave_syscall		IA64_PARAVIRT_ASM_FUNC(leave_syscall)
+#define ia64_work_processed_syscall	\
+	IA64_PARAVIRT_ASM_FUNC(work_processed_syscall)
+#define ia64_leave_kernel		IA64_PARAVIRT_ASM_FUNC(leave_kernel)
+
+#endif /* _ASM_IA64_PARAVIRT_PRIVOP_H */
diff --git a/arch/ia64/include/asm/parport.h b/arch/ia64/include/asm/parport.h
new file mode 100644
index 00000000000..67e16adfcd2
--- /dev/null
+++ b/arch/ia64/include/asm/parport.h
@@ -0,0 +1,20 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_IA64_PARPORT_H
+#define _ASM_IA64_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+
+static int __devinit
+parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_IA64_PARPORT_H */
diff --git a/arch/ia64/include/asm/patch.h b/arch/ia64/include/asm/patch.h
new file mode 100644
index 00000000000..295fe6ab458
--- /dev/null
+++ b/arch/ia64/include/asm/patch.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_IA64_PATCH_H
+#define _ASM_IA64_PATCH_H
+
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * There are a number of reasons for patching instructions.  Rather than duplicating code
+ * all over the place, we put the common stuff here.  Reasons for patching: in-kernel
+ * module-loader, virtual-to-physical patch-list, McKinley Errata 9 workaround, and gate
+ * shared library.  Undoubtedly, some of these reasons will disappear and others will
+ * be added over time.
+ */
+#include <linux/elf.h>
+#include <linux/types.h>
+
+extern void ia64_patch (u64 insn_addr, u64 mask, u64 val);	/* patch any insn slot */
+extern void ia64_patch_imm64 (u64 insn_addr, u64 val);		/* patch "movl" w/abs. value*/
+extern void ia64_patch_imm60 (u64 insn_addr, u64 val);		/* patch "brl" w/ip-rel value */
+
+extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
+extern void ia64_patch_vtop (unsigned long start, unsigned long end);
+extern void ia64_patch_phys_stack_reg(unsigned long val);
+extern void ia64_patch_rse (unsigned long start, unsigned long end);
+extern void ia64_patch_gate (void);
+
+#endif /* _ASM_IA64_PATCH_H */
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
new file mode 100644
index 00000000000..0149097b736
--- /dev/null
+++ b/arch/ia64/include/asm/pci.h
@@ -0,0 +1,167 @@
+#ifndef _ASM_IA64_PCI_H
+#define _ASM_IA64_PCI_H
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/scatterlist.h>
+#include <asm/hw_irq.h>
+
+/*
+ * Can be used to override the logic in pci_scan_bus for skipping already-configured bus
+ * numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the
+ * loader.
+ */
+#define pcibios_assign_all_busses()     0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+void pcibios_config_init(void);
+
+struct pci_dev;
+
+/*
+ * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct
+ * correspondence between device bus addresses and CPU physical addresses.
+ * Platforms with a hardware I/O MMU _must_ turn this off to suppress the
+ * bounce buffer handling code in the block and network device layers.
+ * Platforms with separate bus address spaces _must_ turn this off and provide
+ * a device DMA mapping implementation that takes care of the necessary
+ * address translation.
+ *
+ * For now, the ia64 platforms which may have separate/multiple bus address
+ * spaces all have I/O MMUs which support the merging of physically
+ * discontiguous buffers, so we can use that as the sole factor to determine
+ * the setting of PCI_DMA_BUS_IS_PHYS.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#define PCI_DMA_BUS_IS_PHYS	(ia64_max_iommu_merge_mask == ~0UL)
+
+static inline void
+pcibios_set_master (struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void
+pcibios_penalize_isa_irq (int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#include <asm-generic/pci-dma-compat.h>
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
+				enum pci_mmap_state mmap_state, int write_combine);
+#define HAVE_PCI_LEGACY
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+				      struct vm_area_struct *vma);
+extern ssize_t pci_read_legacy_io(struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t off, size_t count);
+extern ssize_t pci_write_legacy_io(struct kobject *kobj,
+				   struct bin_attribute *bin_attr,
+				   char *buf, loff_t off, size_t count);
+extern int pci_mmap_legacy_mem(struct kobject *kobj,
+			       struct bin_attribute *attr,
+			       struct vm_area_struct *vma);
+
+#define pci_get_legacy_mem platform_pci_get_legacy_mem
+#define pci_legacy_read platform_pci_legacy_read
+#define pci_legacy_write platform_pci_legacy_write
+
+struct pci_window {
+	struct resource resource;
+	u64 offset;
+};
+
+struct pci_controller {
+	void *acpi_handle;
+	void *iommu;
+	int segment;
+	int node;		/* nearest node with memory or -1 for global allocation */
+
+	unsigned int windows;
+	struct pci_window *window;
+
+	void *platform_data;
+};
+
+#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata)
+#define pci_domain_nr(busdev)    (PCI_CONTROLLER(busdev)->segment)
+
+extern struct pci_ops pci_root_ops;
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return (pci_domain_nr(bus) != 0);
+}
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+		struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+		struct resource *res, struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+#define pcibios_scan_all_fns(a, b)	0
+
+#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14);
+}
+
+#endif /* _ASM_IA64_PCI_H */
diff --git a/arch/ia64/include/asm/percpu.h b/arch/ia64/include/asm/percpu.h
new file mode 100644
index 00000000000..77f30b664b4
--- /dev/null
+++ b/arch/ia64/include/asm/percpu.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_PERCPU_H
+#define _ASM_IA64_PERCPU_H
+
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
+
+#ifdef __ASSEMBLY__
+# define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
+#else /* !__ASSEMBLY__ */
+
+
+#include <linux/threads.h>
+
+#ifdef CONFIG_SMP
+
+#ifdef HAVE_MODEL_SMALL_ATTRIBUTE
+# define PER_CPU_ATTRIBUTES	__attribute__((__model__ (__small__)))
+#endif
+
+#define __my_cpu_offset	__ia64_per_cpu_var(local_per_cpu_offset)
+
+extern void *per_cpu_init(void);
+
+#else /* ! SMP */
+
+#define PER_CPU_ATTRIBUTES	__attribute__((__section__(".data.percpu")))
+
+#define per_cpu_init()				(__phys_per_cpu_start)
+
+#endif	/* SMP */
+
+/*
+ * Be extremely careful when taking the address of this variable!  Due to virtual
+ * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
+ * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
+ * more efficient.
+ */
+#define __ia64_per_cpu_var(var)	per_cpu__##var
+
+#include <asm-generic/percpu.h>
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PERCPU_H */
diff --git a/arch/ia64/include/asm/perfmon.h b/arch/ia64/include/asm/perfmon.h
new file mode 100644
index 00000000000..7f3333dd00e
--- /dev/null
+++ b/arch/ia64/include/asm/perfmon.h
@@ -0,0 +1,279 @@
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ */
+
+#ifndef _ASM_IA64_PERFMON_H
+#define _ASM_IA64_PERFMON_H
+
+/*
+ * perfmon comamnds supported on all CPU models
+ */
+#define PFM_WRITE_PMCS		0x01
+#define PFM_WRITE_PMDS		0x02
+#define PFM_READ_PMDS		0x03
+#define PFM_STOP		0x04
+#define PFM_START		0x05
+#define PFM_ENABLE		0x06 /* obsolete */
+#define PFM_DISABLE		0x07 /* obsolete */
+#define PFM_CREATE_CONTEXT	0x08
+#define PFM_DESTROY_CONTEXT	0x09 /* obsolete use close() */
+#define PFM_RESTART		0x0a
+#define PFM_PROTECT_CONTEXT	0x0b /* obsolete */
+#define PFM_GET_FEATURES	0x0c
+#define PFM_DEBUG		0x0d
+#define PFM_UNPROTECT_CONTEXT	0x0e /* obsolete */
+#define PFM_GET_PMC_RESET_VAL	0x0f
+#define PFM_LOAD_CONTEXT	0x10
+#define PFM_UNLOAD_CONTEXT	0x11
+
+/*
+ * PMU model specific commands (may not be supported on all PMU models)
+ */
+#define PFM_WRITE_IBRS		0x20
+#define PFM_WRITE_DBRS		0x21
+
+/*
+ * context flags
+ */
+#define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
+#define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
+#define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
+
+/*
+ * event set flags
+ */
+#define PFM_SETFL_EXCL_IDLE      0x01   /* exclude idle task (syswide only) XXX: DO NOT USE YET */
+
+/*
+ * PMC flags
+ */
+#define PFM_REGFL_OVFL_NOTIFY	0x1	/* send notification on overflow */
+#define PFM_REGFL_RANDOM	0x2	/* randomize sampling interval   */
+
+/*
+ * PMD/PMC/IBR/DBR return flags (ignored on input)
+ *
+ * Those flags are used on output and must be checked in case EAGAIN is returned
+ * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
+ */
+#define PFM_REG_RETFL_NOTAVAIL	(1UL<<31) /* set if register is implemented but not available */
+#define PFM_REG_RETFL_EINVAL	(1UL<<30) /* set if register entry is invalid */
+#define PFM_REG_RETFL_MASK	(PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
+
+#define PFM_REG_HAS_ERROR(flag)	(((flag) & PFM_REG_RETFL_MASK) != 0)
+
+typedef unsigned char pfm_uuid_t[16];	/* custom sampling buffer identifier type */
+
+/*
+ * Request structure used to define a context
+ */
+typedef struct {
+	pfm_uuid_t     ctx_smpl_buf_id;	 /* which buffer format to use (if needed) */
+	unsigned long  ctx_flags;	 /* noblock/block */
+	unsigned short ctx_nextra_sets;	 /* number of extra event sets (you always get 1) */
+	unsigned short ctx_reserved1;	 /* for future use */
+	int	       ctx_fd;		 /* return arg: unique identification for context */
+	void	       *ctx_smpl_vaddr;	 /* return arg: virtual address of sampling buffer, is used */
+	unsigned long  ctx_reserved2[11];/* for future use */
+} pfarg_context_t;
+
+/*
+ * Request structure used to write/read a PMC or PMD
+ */
+typedef struct {
+	unsigned int	reg_num;	   /* which register */
+	unsigned short	reg_set;	   /* event set for this register */
+	unsigned short	reg_reserved1;	   /* for future use */
+
+	unsigned long	reg_value;	   /* initial pmc/pmd value */
+	unsigned long	reg_flags;	   /* input: pmc/pmd flags, return: reg error */
+
+	unsigned long	reg_long_reset;	   /* reset after buffer overflow notification */
+	unsigned long	reg_short_reset;   /* reset after counter overflow */
+
+	unsigned long	reg_reset_pmds[4]; /* which other counters to reset on overflow */
+	unsigned long	reg_random_seed;   /* seed value when randomization is used */
+	unsigned long	reg_random_mask;   /* bitmask used to limit random value */
+	unsigned long   reg_last_reset_val;/* return: PMD last reset value */
+
+	unsigned long	reg_smpl_pmds[4];  /* which pmds are accessed when PMC overflows */
+	unsigned long	reg_smpl_eventid;  /* opaque sampling event identifier */
+
+	unsigned long   reg_reserved2[3];   /* for future use */
+} pfarg_reg_t;
+
+typedef struct {
+	unsigned int	dbreg_num;		/* which debug register */
+	unsigned short	dbreg_set;		/* event set for this register */
+	unsigned short	dbreg_reserved1;	/* for future use */
+	unsigned long	dbreg_value;		/* value for debug register */
+	unsigned long	dbreg_flags;		/* return: dbreg error */
+	unsigned long	dbreg_reserved2[1];	/* for future use */
+} pfarg_dbreg_t;
+
+typedef struct {
+	unsigned int	ft_version;	/* perfmon: major [16-31], minor [0-15] */
+	unsigned int	ft_reserved;	/* reserved for future use */
+	unsigned long	reserved[4];	/* for future use */
+} pfarg_features_t;
+
+typedef struct {
+	pid_t		load_pid;	   /* process to load the context into */
+	unsigned short	load_set;	   /* first event set to load */
+	unsigned short	load_reserved1;	   /* for future use */
+	unsigned long	load_reserved2[3]; /* for future use */
+} pfarg_load_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_ovfl_pmds[4];	/* which PMDs overflowed */
+	unsigned short  msg_active_set;		/* active set at the time of overflow */
+	unsigned short  msg_reserved1;		/* for future use */
+	unsigned int    msg_reserved2;		/* for future use */
+	unsigned long	msg_tstamp;		/* for perf tuning/debug */
+} pfm_ovfl_msg_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_end_msg_t;
+
+typedef struct {
+	int		msg_type;		/* type of the message */
+	int		msg_ctx_fd;		/* unique identifier for the context */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_gen_msg_t;
+
+#define PFM_MSG_OVFL	1	/* an overflow happened */
+#define PFM_MSG_END	2	/* task to which context was attached ended */
+
+typedef union {
+	pfm_ovfl_msg_t	pfm_ovfl_msg;
+	pfm_end_msg_t	pfm_end_msg;
+	pfm_gen_msg_t	pfm_gen_msg;
+} pfm_msg_t;
+
+/*
+ * Define the version numbers for both perfmon as a whole and the sampling buffer format.
+ */
+#define PFM_VERSION_MAJ		 2U
+#define PFM_VERSION_MIN		 0U
+#define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
+#define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
+#define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
+
+
+/*
+ * miscellaneous architected definitions
+ */
+#define PMU_FIRST_COUNTER	4	/* first counting monitor (PMC/PMD) */
+#define PMU_MAX_PMCS		256	/* maximum architected number of PMC registers */
+#define PMU_MAX_PMDS		256	/* maximum architected number of PMD registers */
+
+#ifdef __KERNEL__
+
+extern long perfmonctl(int fd, int cmd, void *arg, int narg);
+
+typedef struct {
+	void (*handler)(int irq, void *arg, struct pt_regs *regs);
+} pfm_intr_handler_desc_t;
+
+extern void pfm_save_regs (struct task_struct *);
+extern void pfm_load_regs (struct task_struct *);
+
+extern void pfm_exit_thread(struct task_struct *);
+extern int  pfm_use_debug_registers(struct task_struct *);
+extern int  pfm_release_debug_registers(struct task_struct *);
+extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin);
+extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
+extern void pfm_init_percpu(void);
+extern void pfm_handle_work(void);
+extern int  pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
+extern int  pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
+
+
+
+/*
+ * Reset PMD register flags
+ */
+#define PFM_PMD_SHORT_RESET	0
+#define PFM_PMD_LONG_RESET	1
+
+typedef union {
+	unsigned int val;
+	struct {
+		unsigned int notify_user:1;	/* notify user program of overflow */
+		unsigned int reset_ovfl_pmds:1;	/* reset overflowed PMDs */
+		unsigned int block_task:1;	/* block monitored task on kernel exit */
+		unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */
+		unsigned int reserved:28;	/* for future use */
+	} bits;
+} pfm_ovfl_ctrl_t;
+
+typedef struct {
+	unsigned char	ovfl_pmd;			/* index of overflowed PMD  */
+	unsigned char   ovfl_notify;			/* =1 if monitor requested overflow notification */
+	unsigned short  active_set;			/* event set active at the time of the overflow */
+	pfm_ovfl_ctrl_t ovfl_ctrl;			/* return: perfmon controls to set by handler */
+
+	unsigned long   pmd_last_reset;			/* last reset value of of the PMD */
+	unsigned long	smpl_pmds[4];			/* bitmask of other PMD of interest on overflow */
+	unsigned long   smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */
+	unsigned long   pmd_value;			/* current 64-bit value of the PMD */
+	unsigned long	pmd_eventid;			/* eventid associated with PMD */
+} pfm_ovfl_arg_t;
+
+
+typedef struct {
+	char		*fmt_name;
+	pfm_uuid_t	fmt_uuid;
+	size_t		fmt_arg_size;
+	unsigned long	fmt_flags;
+
+	int		(*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg);
+	int		(*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size);
+	int 		(*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg);
+	int		(*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp);
+	int		(*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+	int		(*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+	int		(*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs);
+
+	struct list_head fmt_list;
+} pfm_buffer_fmt_t;
+
+extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt);
+extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid);
+
+/*
+ * perfmon interface exported to modules
+ */
+extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+
+/*
+ * describe the content of the local_cpu_date->pfm_syst_info field
+ */
+#define PFM_CPUINFO_SYST_WIDE	0x1	/* if set a system wide session exists */
+#define PFM_CPUINFO_DCR_PP	0x2	/* if set the system wide session has started */
+#define PFM_CPUINFO_EXCL_IDLE	0x4	/* the system wide session excludes the idle task */
+
+/*
+ * sysctl control structure. visible to sampling formats
+ */
+typedef struct {
+	int	debug;		/* turn on/off debugging via syslog */
+	int	debug_ovfl;	/* turn on/off debug printk in overflow handler */
+	int	fastctxsw;	/* turn on/off fast (unsecure) ctxsw */
+	int	expert_mode;	/* turn on/off value checking */
+} pfm_sysctl_t;
+extern pfm_sysctl_t pfm_sysctl;
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_PERFMON_H */
diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
new file mode 100644
index 00000000000..48822c0811d
--- /dev/null
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * This file implements the default sampling buffer format
+ * for Linux/ia64 perfmon subsystem.
+ */
+#ifndef __PERFMON_DEFAULT_SMPL_H__
+#define __PERFMON_DEFAULT_SMPL_H__ 1
+
+#define PFM_DEFAULT_SMPL_UUID { \
+		0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97}
+
+/*
+ * format specific parameters (passed at context creation)
+ */
+typedef struct {
+	unsigned long buf_size;		/* size of the buffer in bytes */
+	unsigned int  flags;		/* buffer specific flags */
+	unsigned int  res1;		/* for future use */
+	unsigned long reserved[2];	/* for future use */
+} pfm_default_smpl_arg_t;
+
+/*
+ * combined context+format specific structure. Can be passed
+ * to PFM_CONTEXT_CREATE
+ */
+typedef struct {
+	pfarg_context_t		ctx_arg;
+	pfm_default_smpl_arg_t	buf_arg;
+} pfm_default_smpl_ctx_arg_t;
+
+/*
+ * This header is at the beginning of the sampling buffer returned to the user.
+ * It is directly followed by the first record.
+ */
+typedef struct {
+	unsigned long	hdr_count;		/* how many valid entries */
+	unsigned long	hdr_cur_offs;		/* current offset from top of buffer */
+	unsigned long	hdr_reserved2;		/* reserved for future use */
+
+	unsigned long	hdr_overflows;		/* how many times the buffer overflowed */
+	unsigned long   hdr_buf_size;		/* how many bytes in the buffer */
+
+	unsigned int	hdr_version;		/* contains perfmon version (smpl format diffs) */
+	unsigned int	hdr_reserved1;		/* for future use */
+	unsigned long	hdr_reserved[10];	/* for future use */
+} pfm_default_smpl_hdr_t;
+
+/*
+ * Entry header in the sampling buffer.  The header is directly followed
+ * with the values of the PMD registers of interest saved in increasing 
+ * index order: PMD4, PMD5, and so on. How many PMDs are present depends 
+ * on how the session was programmed.
+ *
+ * In the case where multiple counters overflow at the same time, multiple
+ * entries are written consecutively.
+ *
+ * last_reset_value member indicates the initial value of the overflowed PMD. 
+ */
+typedef struct {
+        int             pid;                    /* thread id (for NPTL, this is gettid()) */
+        unsigned char   reserved1[3];           /* reserved for future use */
+        unsigned char   ovfl_pmd;               /* index of overflowed PMD */
+
+        unsigned long   last_reset_val;         /* initial value of overflowed PMD */
+        unsigned long   ip;                     /* where did the overflow interrupt happened  */
+        unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
+
+        unsigned short  cpu;                    /* cpu on which the overfow occured */
+        unsigned short  set;                    /* event set active when overflow ocurred   */
+        int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
+} pfm_default_smpl_entry_t;
+
+#define PFM_DEFAULT_MAX_PMDS		64 /* how many pmds supported by data structures (sizeof(unsigned long) */
+#define PFM_DEFAULT_MAX_ENTRY_SIZE	(sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS))
+#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE	(sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE)
+
+#define PFM_DEFAULT_SMPL_VERSION_MAJ	2U
+#define PFM_DEFAULT_SMPL_VERSION_MIN	0U
+#define PFM_DEFAULT_SMPL_VERSION	(((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff))
+
+#endif /* __PERFMON_DEFAULT_SMPL_H__ */
diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
new file mode 100644
index 00000000000..b9ac1a6fc21
--- /dev/null
+++ b/arch/ia64/include/asm/pgalloc.h
@@ -0,0 +1,122 @@
+#ifndef _ASM_IA64_PGALLOC_H
+#define _ASM_IA64_PGALLOC_H
+
+/*
+ * This file contains the functions and defines necessary to allocate
+ * page tables.
+ *
+ * This hopefully works with any (fixed) ia-64 page-size, as defined
+ * in <asm/page.h> (currently 8192).
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2000, Goutham Rao <goutham.rao@intel.com>
+ */
+
+
+#include <linux/compiler.h>
+#include <linux/mm.h>
+#include <linux/page-flags.h>
+#include <linux/threads.h>
+#include <linux/quicklist.h>
+
+#include <asm/mmu_context.h>
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(0, NULL, pgd);
+}
+
+#ifdef CONFIG_PGTABLE_4
+static inline void
+pgd_populate(struct mm_struct *mm, pgd_t * pgd_entry, pud_t * pud)
+{
+	pgd_val(*pgd_entry) = __pa(pud);
+}
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	quicklist_free(0, NULL, pud);
+}
+#define __pud_free_tlb(tlb, pud)	pud_free((tlb)->mm, pud)
+#endif /* CONFIG_PGTABLE_4 */
+
+static inline void
+pud_populate(struct mm_struct *mm, pud_t * pud_entry, pmd_t * pmd)
+{
+	pud_val(*pud_entry) = __pa(pmd);
+}
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	quicklist_free(0, NULL, pmd);
+}
+
+#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
+{
+	pmd_val(*pmd_entry) = page_to_phys(pte);
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t * pmd_entry, pte_t * pte)
+{
+	pmd_val(*pmd_entry) = __pa(pte);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+	if (!pg)
+		return NULL;
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	quicklist_free_page(0, NULL, pte);
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(0, NULL, pte);
+}
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(0, NULL, 25, 16);
+}
+
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+
+#endif				/* _ASM_IA64_PGALLOC_H */
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
new file mode 100644
index 00000000000..7a9bff47564
--- /dev/null
+++ b/arch/ia64/include/asm/pgtable.h
@@ -0,0 +1,615 @@
+#ifndef _ASM_IA64_PGTABLE_H
+#define _ASM_IA64_PGTABLE_H
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the IA-64 page table tree.
+ *
+ * This hopefully works with any (fixed) IA-64 page-size, as defined
+ * in <asm/page.h>.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <asm/mman.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/types.h>
+
+#define IA64_MAX_PHYS_BITS	50	/* max. number of physical address bits (architected) */
+
+/*
+ * First, define the various bits in a PTE.  Note that the PTE format
+ * matches the VHPT short format, the firt doubleword of the VHPD long
+ * format, and the first doubleword of the TLB insertion format.
+ */
+#define _PAGE_P_BIT		0
+#define _PAGE_A_BIT		5
+#define _PAGE_D_BIT		6
+
+#define _PAGE_P			(1 << _PAGE_P_BIT)	/* page present bit */
+#define _PAGE_MA_WB		(0x0 <<  2)	/* write back memory attribute */
+#define _PAGE_MA_UC		(0x4 <<  2)	/* uncacheable memory attribute */
+#define _PAGE_MA_UCE		(0x5 <<  2)	/* UC exported attribute */
+#define _PAGE_MA_WC		(0x6 <<  2)	/* write coalescing memory attribute */
+#define _PAGE_MA_NAT		(0x7 <<  2)	/* not-a-thing attribute */
+#define _PAGE_MA_MASK		(0x7 <<  2)
+#define _PAGE_PL_0		(0 <<  7)	/* privilege level 0 (kernel) */
+#define _PAGE_PL_1		(1 <<  7)	/* privilege level 1 (unused) */
+#define _PAGE_PL_2		(2 <<  7)	/* privilege level 2 (unused) */
+#define _PAGE_PL_3		(3 <<  7)	/* privilege level 3 (user) */
+#define _PAGE_PL_MASK		(3 <<  7)
+#define _PAGE_AR_R		(0 <<  9)	/* read only */
+#define _PAGE_AR_RX		(1 <<  9)	/* read & execute */
+#define _PAGE_AR_RW		(2 <<  9)	/* read & write */
+#define _PAGE_AR_RWX		(3 <<  9)	/* read, write & execute */
+#define _PAGE_AR_R_RW		(4 <<  9)	/* read / read & write */
+#define _PAGE_AR_RX_RWX		(5 <<  9)	/* read & exec / read, write & exec */
+#define _PAGE_AR_RWX_RW		(6 <<  9)	/* read, write & exec / read & write */
+#define _PAGE_AR_X_RX		(7 <<  9)	/* exec & promote / read & exec */
+#define _PAGE_AR_MASK		(7 <<  9)
+#define _PAGE_AR_SHIFT		9
+#define _PAGE_A			(1 << _PAGE_A_BIT)	/* page accessed bit */
+#define _PAGE_D			(1 << _PAGE_D_BIT)	/* page dirty bit */
+#define _PAGE_PPN_MASK		(((__IA64_UL(1) << IA64_MAX_PHYS_BITS) - 1) & ~0xfffUL)
+#define _PAGE_ED		(__IA64_UL(1) << 52)	/* exception deferral */
+#define _PAGE_PROTNONE		(__IA64_UL(1) << 63)
+
+/* Valid only for a PTE with the present bit cleared: */
+#define _PAGE_FILE		(1 << 1)		/* see swap & file pte remarks below */
+
+#define _PFN_MASK		_PAGE_PPN_MASK
+/* Mask of bits which may be changed by pte_modify(); the odd bits are there for _PAGE_PROTNONE */
+#define _PAGE_CHG_MASK	(_PAGE_P | _PAGE_PROTNONE | _PAGE_PL_MASK | _PAGE_AR_MASK | _PAGE_ED)
+
+#define _PAGE_SIZE_4K	12
+#define _PAGE_SIZE_8K	13
+#define _PAGE_SIZE_16K	14
+#define _PAGE_SIZE_64K	16
+#define _PAGE_SIZE_256K	18
+#define _PAGE_SIZE_1M	20
+#define _PAGE_SIZE_4M	22
+#define _PAGE_SIZE_16M	24
+#define _PAGE_SIZE_64M	26
+#define _PAGE_SIZE_256M	28
+#define _PAGE_SIZE_1G	30
+#define _PAGE_SIZE_4G	32
+
+#define __ACCESS_BITS		_PAGE_ED | _PAGE_A | _PAGE_P | _PAGE_MA_WB
+#define __DIRTY_BITS_NO_ED	_PAGE_A | _PAGE_P | _PAGE_D | _PAGE_MA_WB
+#define __DIRTY_BITS		_PAGE_ED | __DIRTY_BITS_NO_ED
+
+/*
+ * How many pointers will a page table level hold expressed in shift
+ */
+#define PTRS_PER_PTD_SHIFT	(PAGE_SHIFT-3)
+
+/*
+ * Definitions for fourth level:
+ */
+#define PTRS_PER_PTE	(__IA64_UL(1) << (PTRS_PER_PTD_SHIFT))
+
+/*
+ * Definitions for third level:
+ *
+ * PMD_SHIFT determines the size of the area a third-level page table
+ * can map.
+ */
+#define PMD_SHIFT	(PAGE_SHIFT + (PTRS_PER_PTD_SHIFT))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PTRS_PER_PMD	(1UL << (PTRS_PER_PTD_SHIFT))
+
+#ifdef CONFIG_PGTABLE_4
+/*
+ * Definitions for second level:
+ *
+ * PUD_SHIFT determines the size of the area a second-level page table
+ * can map.
+ */
+#define PUD_SHIFT	(PMD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+#define PTRS_PER_PUD	(1UL << (PTRS_PER_PTD_SHIFT))
+#endif
+
+/*
+ * Definitions for first level:
+ *
+ * PGDIR_SHIFT determines what a first-level page table entry can map.
+ */
+#ifdef CONFIG_PGTABLE_4
+#define PGDIR_SHIFT		(PUD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#else
+#define PGDIR_SHIFT		(PMD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#endif
+#define PGDIR_SIZE		(__IA64_UL(1) << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD_SHIFT	PTRS_PER_PTD_SHIFT
+#define PTRS_PER_PGD		(1UL << PTRS_PER_PGD_SHIFT)
+#define USER_PTRS_PER_PGD	(5*PTRS_PER_PGD/8)	/* regions 0-4 are user regions */
+#define FIRST_USER_ADDRESS	0
+
+/*
+ * All the normal masks have the "page accessed" bits on, as any time
+ * they are used, the page is accessed. They are cleared only by the
+ * page-out routines.
+ */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_A)
+#define PAGE_SHARED	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RW)
+#define PAGE_READONLY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY_EXEC	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define PAGE_GATE	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
+#define PAGE_KERNEL	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX)
+#define PAGE_KERNELRX	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
+
+# ifndef __ASSEMBLY__
+
+#include <linux/sched.h>	/* for mm_struct */
+#include <linux/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+#include <asm/processor.h>
+
+/*
+ * Next come the mappings that determine how mmap() protection bits
+ * (PROT_EXEC, PROT_READ, PROT_WRITE, PROT_NONE) get implemented.  The
+ * _P version gets used for a private shared memory segment, the _S
+ * version gets used for a shared memory segment with MAP_SHARED on.
+ * In a private shared memory segment, we do a copy-on-write if a task
+ * attempts to write to the page.
+ */
+	/* xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_READONLY	/* write to priv pg -> copy & make writable */
+#define __P011	PAGE_READONLY	/* ditto */
+#define __P100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __P101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED	/* we don't have (and don't need) write-only */
+#define __S011	PAGE_SHARED
+#define __S100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __S101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __S110	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+#define __S111	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+
+#define pgd_ERROR(e)	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+#ifdef CONFIG_PGTABLE_4
+#define pud_ERROR(e)	printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e))
+#endif
+#define pmd_ERROR(e)	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pte_ERROR(e)	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page addresses:
+ */
+
+
+/* Quick test to see if ADDR is a (potentially) valid physical address. */
+static inline long
+ia64_phys_addr_valid (unsigned long addr)
+{
+	return (addr & (local_cpu_data->unimpl_pa_mask)) == 0;
+}
+
+/*
+ * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
+ * memory.  For the return value to be meaningful, ADDR must be >=
+ * PAGE_OFFSET.  This operation can be relatively expensive (e.g.,
+ * require a hash-, or multi-level tree-lookup or something of that
+ * sort) but it guarantees to return TRUE only if accessing the page
+ * at that address does not cause an error.  Note that there may be
+ * addresses for which kern_addr_valid() returns FALSE even though an
+ * access would not cause an error (e.g., this is typically true for
+ * memory mapped I/O regions.
+ *
+ * XXX Need to implement this for IA-64.
+ */
+#define kern_addr_valid(addr)	(1)
+
+
+/*
+ * Now come the defines and routines to manage and access the three-level
+ * page table.
+ */
+
+
+#define VMALLOC_START		(RGN_BASE(RGN_GATE) + 0x200000000UL)
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define VMALLOC_END_INIT	(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9)))
+# define VMALLOC_END		vmalloc_end
+  extern unsigned long vmalloc_end;
+#else
+#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_SPARSEMEM_VMEMMAP)
+/* SPARSEMEM_VMEMMAP uses half of vmalloc... */
+# define VMALLOC_END		(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 10)))
+# define vmemmap		((struct page *)VMALLOC_END)
+#else
+# define VMALLOC_END		(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9)))
+#endif
+#endif
+
+/* fs/proc/kcore.c */
+#define	kc_vaddr_to_offset(v) ((v) - RGN_BASE(RGN_GATE))
+#define	kc_offset_to_vaddr(o) ((o) + RGN_BASE(RGN_GATE))
+
+#define RGN_MAP_SHIFT (PGDIR_SHIFT + PTRS_PER_PGD_SHIFT - 3)
+#define RGN_MAP_LIMIT	((1UL << RGN_MAP_SHIFT) - PAGE_SIZE)	/* per region addr limit */
+
+/*
+ * Conversion functions: convert page frame number (pfn) and a protection value to a page
+ * table entry (pte).
+ */
+#define pfn_pte(pfn, pgprot) \
+({ pte_t __pte; pte_val(__pte) = ((pfn) << PAGE_SHIFT) | pgprot_val(pgprot); __pte; })
+
+/* Extract pfn from pte.  */
+#define pte_pfn(_pte)		((pte_val(_pte) & _PFN_MASK) >> PAGE_SHIFT)
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; })
+
+#define pte_modify(_pte, newprot) \
+	(__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK)))
+
+#define pte_none(pte) 			(!pte_val(pte))
+#define pte_present(pte)		(pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,pte)		(pte_val(*(pte)) = 0UL)
+/* pte_page() returns the "struct page *" corresponding to the PTE: */
+#define pte_page(pte)			virt_to_page(((pte_val(pte) & _PFN_MASK) + PAGE_OFFSET))
+
+#define pmd_none(pmd)			(!pmd_val(pmd))
+#define pmd_bad(pmd)			(!ia64_phys_addr_valid(pmd_val(pmd)))
+#define pmd_present(pmd)		(pmd_val(pmd) != 0UL)
+#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0UL)
+#define pmd_page_vaddr(pmd)		((unsigned long) __va(pmd_val(pmd) & _PFN_MASK))
+#define pmd_page(pmd)			virt_to_page((pmd_val(pmd) + PAGE_OFFSET))
+
+#define pud_none(pud)			(!pud_val(pud))
+#define pud_bad(pud)			(!ia64_phys_addr_valid(pud_val(pud)))
+#define pud_present(pud)		(pud_val(pud) != 0UL)
+#define pud_clear(pudp)			(pud_val(*(pudp)) = 0UL)
+#define pud_page_vaddr(pud)		((unsigned long) __va(pud_val(pud) & _PFN_MASK))
+#define pud_page(pud)			virt_to_page((pud_val(pud) + PAGE_OFFSET))
+
+#ifdef CONFIG_PGTABLE_4
+#define pgd_none(pgd)			(!pgd_val(pgd))
+#define pgd_bad(pgd)			(!ia64_phys_addr_valid(pgd_val(pgd)))
+#define pgd_present(pgd)		(pgd_val(pgd) != 0UL)
+#define pgd_clear(pgdp)			(pgd_val(*(pgdp)) = 0UL)
+#define pgd_page_vaddr(pgd)		((unsigned long) __va(pgd_val(pgd) & _PFN_MASK))
+#define pgd_page(pgd)			virt_to_page((pgd_val(pgd) + PAGE_OFFSET))
+#endif
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+#define pte_write(pte)	((unsigned) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) - 2) <= 4)
+#define pte_exec(pte)		((pte_val(pte) & _PAGE_AR_RX) != 0)
+#define pte_dirty(pte)		((pte_val(pte) & _PAGE_D) != 0)
+#define pte_young(pte)		((pte_val(pte) & _PAGE_A) != 0)
+#define pte_file(pte)		((pte_val(pte) & _PAGE_FILE) != 0)
+#define pte_special(pte)	0
+
+/*
+ * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the
+ * access rights:
+ */
+#define pte_wrprotect(pte)	(__pte(pte_val(pte) & ~_PAGE_AR_RW))
+#define pte_mkwrite(pte)	(__pte(pte_val(pte) | _PAGE_AR_RW))
+#define pte_mkold(pte)		(__pte(pte_val(pte) & ~_PAGE_A))
+#define pte_mkyoung(pte)	(__pte(pte_val(pte) | _PAGE_A))
+#define pte_mkclean(pte)	(__pte(pte_val(pte) & ~_PAGE_D))
+#define pte_mkdirty(pte)	(__pte(pte_val(pte) | _PAGE_D))
+#define pte_mkhuge(pte)		(__pte(pte_val(pte)))
+#define pte_mkspecial(pte)	(pte)
+
+/*
+ * Because ia64's Icache and Dcache is not coherent (on a cpu), we need to
+ * sync icache and dcache when we insert *new* executable page.
+ *  __ia64_sync_icache_dcache() check Pg_arch_1 bit and flush icache
+ * if necessary.
+ *
+ *  set_pte() is also called by the kernel, but we can expect that the kernel
+ *  flushes icache explicitly if necessary.
+ */
+#define pte_present_exec_user(pte)\
+	((pte_val(pte) & (_PAGE_P | _PAGE_PL_MASK | _PAGE_AR_RX)) == \
+		(_PAGE_P | _PAGE_PL_3 | _PAGE_AR_RX))
+
+extern void __ia64_sync_icache_dcache(pte_t pteval);
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+	/* page is present && page is user  && page is executable
+	 * && (page swapin or new page or page migraton
+	 *	|| copy_on_write with page copying.)
+	 */
+	if (pte_present_exec_user(pteval) &&
+	    (!pte_present(*ptep) ||
+		pte_pfn(*ptep) != pte_pfn(pteval)))
+		/* load_module() calles flush_icache_range() explicitly*/
+		__ia64_sync_icache_dcache(pteval);
+	*ptep = pteval;
+}
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * Make page protection values cacheable, uncacheable, or write-
+ * combining.  Note that "protection" is really a misnomer here as the
+ * protection value contains the memory attribute bits, dirty bits, and
+ * various other bits as well.
+ */
+#define pgprot_cacheable(prot)		__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WB)
+#define pgprot_noncached(prot)		__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_UC)
+#define pgprot_writecombine(prot)	__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC)
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+static inline unsigned long
+pgd_index (unsigned long address)
+{
+	unsigned long region = address >> 61;
+	unsigned long l1index = (address >> PGDIR_SHIFT) & ((PTRS_PER_PGD >> 3) - 1);
+
+	return (region << (PAGE_SHIFT - 6)) | l1index;
+}
+
+/* The offset in the 1-level directory is given by the 3 region bits
+   (61..63) and the level-1 bits.  */
+static inline pgd_t*
+pgd_offset (const struct mm_struct *mm, unsigned long address)
+{
+	return mm->pgd + pgd_index(address);
+}
+
+/* In the kernel's mapped region we completely ignore the region number
+   (since we know it's in region number 5). */
+#define pgd_offset_k(addr) \
+	(init_mm.pgd + (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)))
+
+/* Look up a pgd entry in the gate area.  On IA-64, the gate-area
+   resides in the kernel-mapped segment, hence we use pgd_offset_k()
+   here.  */
+#define pgd_offset_gate(mm, addr)	pgd_offset_k(addr)
+
+#ifdef CONFIG_PGTABLE_4
+/* Find an entry in the second-level page table.. */
+#define pud_offset(dir,addr) \
+	((pud_t *) pgd_page_vaddr(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+#endif
+
+/* Find an entry in the third-level page table.. */
+#define pmd_offset(dir,addr) \
+	((pmd_t *) pud_page_vaddr(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+/*
+ * Find an entry in the third-level page table.  This looks more complicated than it
+ * should be because some platforms place page tables in high memory.
+ */
+#define pte_index(addr)	 	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir,addr)	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_offset_map_nested(dir,addr)	pte_offset_map(dir, addr)
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/* atomic versions of the some PTE manipulations: */
+
+static inline int
+ptep_test_and_clear_young (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_A_BIT, ptep);
+#else
+	pte_t pte = *ptep;
+	if (!pte_young(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
+	return 1;
+#endif
+}
+
+static inline pte_t
+ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	return __pte(xchg((long *) ptep, 0));
+#else
+	pte_t pte = *ptep;
+	pte_clear(mm, addr, ptep);
+	return pte;
+#endif
+}
+
+static inline void
+ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	unsigned long new, old;
+
+	do {
+		old = pte_val(*ptep);
+		new = pte_val(pte_wrprotect(__pte (old)));
+	} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+#else
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+#endif
+}
+
+static inline int
+pte_same (pte_t a, pte_t b)
+{
+	return pte_val(a) == pte_val(b);
+}
+
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init (void);
+
+/*
+ * Note: The macros below rely on the fact that MAX_SWAPFILES_SHIFT <= number of
+ *	 bits in the swap-type field of the swap pte.  It would be nice to
+ *	 enforce that, but we can't easily include <linux/swap.h> here.
+ *	 (Of course, better still would be to define MAX_SWAPFILES_SHIFT here...).
+ *
+ * Format of swap pte:
+ *	bit   0   : present bit (must be zero)
+ *	bit   1   : _PAGE_FILE (must be zero)
+ *	bits  2- 8: swap-type
+ *	bits  9-62: swap offset
+ *	bit  63   : _PAGE_PROTNONE bit
+ *
+ * Format of file pte:
+ *	bit   0   : present bit (must be zero)
+ *	bit   1   : _PAGE_FILE (must be one)
+ *	bits  2-62: file_offset/PAGE_SIZE
+ *	bit  63   : _PAGE_PROTNONE bit
+ */
+#define __swp_type(entry)		(((entry).val >> 2) & 0x7f)
+#define __swp_offset(entry)		(((entry).val << 1) >> 10)
+#define __swp_entry(type,offset)	((swp_entry_t) { ((type) << 2) | ((long) (offset) << 9) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define PTE_FILE_MAX_BITS		61
+#define pte_to_pgoff(pte)		((pte_val(pte) << 1) >> 3)
+#define pgoff_to_pte(off)		((pte_t) { ((off) << 2) | _PAGE_FILE })
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+extern struct page *zero_page_memmap_ptr;
+#define ZERO_PAGE(vaddr) (zero_page_memmap_ptr)
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HUGETLB_PGDIR_SHIFT	(HPAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define HUGETLB_PGDIR_SIZE	(__IA64_UL(1) << HUGETLB_PGDIR_SHIFT)
+#define HUGETLB_PGDIR_MASK	(~(HUGETLB_PGDIR_SIZE-1))
+#endif
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+/*
+ * Update PTEP with ENTRY, which is guaranteed to be a less
+ * restrictive PTE.  That is, ENTRY may have the ACCESSED, DIRTY, and
+ * WRITABLE bits turned on, when the value at PTEP did not.  The
+ * WRITABLE bit may only be turned if SAFELY_WRITABLE is TRUE.
+ *
+ * SAFELY_WRITABLE is TRUE if we can update the value at PTEP without
+ * having to worry about races.  On SMP machines, there are only two
+ * cases where this is true:
+ *
+ *	(1) *PTEP has the PRESENT bit turned OFF
+ *	(2) ENTRY has the DIRTY bit turned ON
+ *
+ * On ia64, we could implement this routine with a cmpxchg()-loop
+ * which ORs in the _PAGE_A/_PAGE_D bit if they're set in ENTRY.
+ * However, like on x86, we can get a more streamlined version by
+ * observing that it is OK to drop ACCESSED bit updates when
+ * SAFELY_WRITABLE is FALSE.  Besides being rare, all that would do is
+ * result in an extra Access-bit fault, which would then turn on the
+ * ACCESSED bit in the low-level fault handler (iaccess_bit or
+ * daccess_bit in ivt.S).
+ */
+#ifdef CONFIG_SMP
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
+({									\
+	int __changed = !pte_same(*(__ptep), __entry);			\
+	if (__changed && __safely_writable) {				\
+		set_pte(__ptep, __entry);				\
+		flush_tlb_page(__vma, __addr);				\
+	}								\
+	__changed;							\
+})
+#else
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
+({									\
+	int __changed = !pte_same(*(__ptep), __entry);			\
+	if (__changed) {						\
+		set_pte_at((__vma)->vm_mm, (__addr), __ptep, __entry);	\
+		flush_tlb_page(__vma, __addr);				\
+	}								\
+	__changed;							\
+})
+#endif
+
+#  ifdef CONFIG_VIRTUAL_MEM_MAP
+  /* arch mem_map init routine is needed due to holes in a virtual mem_map */
+#   define __HAVE_ARCH_MEMMAP_INIT
+    extern void memmap_init (unsigned long size, int nid, unsigned long zone,
+			     unsigned long start_pfn);
+#  endif /* CONFIG_VIRTUAL_MEM_MAP */
+# endif /* !__ASSEMBLY__ */
+
+/*
+ * Identity-mapped regions use a large page size.  We'll call such large pages
+ * "granules".  If you can think of a better name that's unambiguous, let me
+ * know...
+ */
+#if defined(CONFIG_IA64_GRANULE_64MB)
+# define IA64_GRANULE_SHIFT	_PAGE_SIZE_64M
+#elif defined(CONFIG_IA64_GRANULE_16MB)
+# define IA64_GRANULE_SHIFT	_PAGE_SIZE_16M
+#endif
+#define IA64_GRANULE_SIZE	(1 << IA64_GRANULE_SHIFT)
+/*
+ * log2() of the page size we use to map the kernel image (IA64_TR_KERNEL):
+ */
+#define KERNEL_TR_PAGE_SHIFT	_PAGE_SIZE_64M
+#define KERNEL_TR_PAGE_SIZE	(1 << KERNEL_TR_PAGE_SHIFT)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+/* These tell get_user_pages() that the first gate page is accessible from user-level.  */
+#define FIXADDR_USER_START	GATE_ADDR
+#ifdef HAVE_BUGGY_SEGREL
+# define FIXADDR_USER_END	(GATE_ADDR + 2*PAGE_SIZE)
+#else
+# define FIXADDR_USER_END	(GATE_ADDR + 2*PERCPU_PAGE_SIZE)
+#endif
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#define __HAVE_ARCH_PGD_OFFSET_GATE
+
+
+#ifndef CONFIG_PGTABLE_4
+#include <asm-generic/pgtable-nopud.h>
+#endif
+#include <asm-generic/pgtable.h>
+
+#endif /* _ASM_IA64_PGTABLE_H */
diff --git a/arch/ia64/include/asm/poll.h b/arch/ia64/include/asm/poll.h
new file mode 100644
index 00000000000..c98509d3149
--- /dev/null
+++ b/arch/ia64/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/ia64/include/asm/posix_types.h b/arch/ia64/include/asm/posix_types.h
new file mode 100644
index 00000000000..17885567b73
--- /dev/null
+++ b/arch/ia64/include/asm/posix_types.h
@@ -0,0 +1,126 @@
+#ifndef _ASM_IA64_POSIX_TYPES_H
+#define _ASM_IA64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ *
+ * Based on <asm-alpha/posix_types.h>.
+ *
+ * Modified 1998-2000, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned long	__kernel_sigset_t;	/* at least 32 bits */
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned int	__kernel_old_dev_t;
+
+# ifdef __KERNEL__
+
+#  ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
+
+#  else /* !__GNUC__ */
+
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			return;
+
+		      case 8:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			return;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#  endif /* !__GNUC__ */
+# endif /* __KERNEL__ */
+#endif /* _ASM_IA64_POSIX_TYPES_H */
diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h
new file mode 100644
index 00000000000..f88fa054d01
--- /dev/null
+++ b/arch/ia64/include/asm/processor.h
@@ -0,0 +1,771 @@
+#ifndef _ASM_IA64_PROCESSOR_H
+#define _ASM_IA64_PROCESSOR_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ *
+ * 11/24/98	S.Eranian	added ia64_set_iva()
+ * 12/03/99	D. Mosberger	implement thread_saved_pc() via kernel unwind API
+ * 06/16/00	A. Mallick	added csd/ssd/tssd for ia32 support
+ */
+
+
+#include <asm/intrinsics.h>
+#include <asm/kregs.h>
+#include <asm/ptrace.h>
+#include <asm/ustack.h>
+
+#define IA64_NUM_PHYS_STACK_REG	96
+#define IA64_NUM_DBG_REGS	8
+
+#define DEFAULT_MAP_BASE	__IA64_UL_CONST(0x2000000000000000)
+#define DEFAULT_TASK_SIZE	__IA64_UL_CONST(0xa000000000000000)
+
+/*
+ * TASK_SIZE really is a mis-named.  It really is the maximum user
+ * space address (plus one).  On IA-64, there are five regions of 2TB
+ * each (assuming 8KB page size), for a total of 8TB of user virtual
+ * address space.
+ */
+#define TASK_SIZE_OF(tsk)	((tsk)->thread.task_size)
+#define TASK_SIZE       	TASK_SIZE_OF(current)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(current->thread.map_base)
+
+#define IA64_THREAD_FPH_VALID	(__IA64_UL(1) << 0)	/* floating-point high state valid? */
+#define IA64_THREAD_DBG_VALID	(__IA64_UL(1) << 1)	/* debug registers valid? */
+#define IA64_THREAD_PM_VALID	(__IA64_UL(1) << 2)	/* performance registers valid? */
+#define IA64_THREAD_UAC_NOPRINT	(__IA64_UL(1) << 3)	/* don't log unaligned accesses */
+#define IA64_THREAD_UAC_SIGBUS	(__IA64_UL(1) << 4)	/* generate SIGBUS on unaligned acc. */
+#define IA64_THREAD_MIGRATION	(__IA64_UL(1) << 5)	/* require migration
+							   sync at ctx sw */
+#define IA64_THREAD_FPEMU_NOPRINT (__IA64_UL(1) << 6)	/* don't log any fpswa faults */
+#define IA64_THREAD_FPEMU_SIGFPE  (__IA64_UL(1) << 7)	/* send a SIGFPE for fpswa faults */
+
+#define IA64_THREAD_UAC_SHIFT	3
+#define IA64_THREAD_UAC_MASK	(IA64_THREAD_UAC_NOPRINT | IA64_THREAD_UAC_SIGBUS)
+#define IA64_THREAD_FPEMU_SHIFT	6
+#define IA64_THREAD_FPEMU_MASK	(IA64_THREAD_FPEMU_NOPRINT | IA64_THREAD_FPEMU_SIGFPE)
+
+
+/*
+ * This shift should be large enough to be able to represent 1000000000/itc_freq with good
+ * accuracy while being small enough to fit 10*1000000000<<IA64_NSEC_PER_CYC_SHIFT in 64 bits
+ * (this will give enough slack to represent 10 seconds worth of time as a scaled number).
+ */
+#define IA64_NSEC_PER_CYC_SHIFT	30
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cache.h>
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <linux/types.h>
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+#include <asm/percpu.h>
+#include <asm/rse.h>
+#include <asm/unwind.h>
+#include <asm/atomic.h>
+#ifdef CONFIG_NUMA
+#include <asm/nodedata.h>
+#endif
+
+/* like above but expressed as bitfields for more efficient access: */
+struct ia64_psr {
+	__u64 reserved0 : 1;
+	__u64 be : 1;
+	__u64 up : 1;
+	__u64 ac : 1;
+	__u64 mfl : 1;
+	__u64 mfh : 1;
+	__u64 reserved1 : 7;
+	__u64 ic : 1;
+	__u64 i : 1;
+	__u64 pk : 1;
+	__u64 reserved2 : 1;
+	__u64 dt : 1;
+	__u64 dfl : 1;
+	__u64 dfh : 1;
+	__u64 sp : 1;
+	__u64 pp : 1;
+	__u64 di : 1;
+	__u64 si : 1;
+	__u64 db : 1;
+	__u64 lp : 1;
+	__u64 tb : 1;
+	__u64 rt : 1;
+	__u64 reserved3 : 4;
+	__u64 cpl : 2;
+	__u64 is : 1;
+	__u64 mc : 1;
+	__u64 it : 1;
+	__u64 id : 1;
+	__u64 da : 1;
+	__u64 dd : 1;
+	__u64 ss : 1;
+	__u64 ri : 2;
+	__u64 ed : 1;
+	__u64 bn : 1;
+	__u64 reserved4 : 19;
+};
+
+union ia64_isr {
+	__u64  val;
+	struct {
+		__u64 code : 16;
+		__u64 vector : 8;
+		__u64 reserved1 : 8;
+		__u64 x : 1;
+		__u64 w : 1;
+		__u64 r : 1;
+		__u64 na : 1;
+		__u64 sp : 1;
+		__u64 rs : 1;
+		__u64 ir : 1;
+		__u64 ni : 1;
+		__u64 so : 1;
+		__u64 ei : 2;
+		__u64 ed : 1;
+		__u64 reserved2 : 20;
+	};
+};
+
+union ia64_lid {
+	__u64 val;
+	struct {
+		__u64  rv  : 16;
+		__u64  eid : 8;
+		__u64  id  : 8;
+		__u64  ig  : 32;
+	};
+};
+
+union ia64_tpr {
+	__u64 val;
+	struct {
+		__u64 ig0 : 4;
+		__u64 mic : 4;
+		__u64 rsv : 8;
+		__u64 mmi : 1;
+		__u64 ig1 : 47;
+	};
+};
+
+union ia64_itir {
+	__u64 val;
+	struct {
+		__u64 rv3  :  2; /* 0-1 */
+		__u64 ps   :  6; /* 2-7 */
+		__u64 key  : 24; /* 8-31 */
+		__u64 rv4  : 32; /* 32-63 */
+	};
+};
+
+union  ia64_rr {
+	__u64 val;
+	struct {
+		__u64  ve	:  1;  /* enable hw walker */
+		__u64  reserved0:  1;  /* reserved */
+		__u64  ps	:  6;  /* log page size */
+		__u64  rid	: 24;  /* region id */
+		__u64  reserved1: 32;  /* reserved */
+	};
+};
+
+/*
+ * CPU type, hardware bug flags, and per-CPU state.  Frequently used
+ * state comes earlier:
+ */
+struct cpuinfo_ia64 {
+	__u32 softirq_pending;
+	__u64 itm_delta;	/* # of clock cycles between clock ticks */
+	__u64 itm_next;		/* interval timer mask value to use for next clock tick */
+	__u64 nsec_per_cyc;	/* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */
+	__u64 unimpl_va_mask;	/* mask of unimplemented virtual address bits (from PAL) */
+	__u64 unimpl_pa_mask;	/* mask of unimplemented physical address bits (from PAL) */
+	__u64 itc_freq;		/* frequency of ITC counter */
+	__u64 proc_freq;	/* frequency of processor */
+	__u64 cyc_per_usec;	/* itc_freq/1000000 */
+	__u64 ptce_base;
+	__u32 ptce_count[2];
+	__u32 ptce_stride[2];
+	struct task_struct *ksoftirqd;	/* kernel softirq daemon for this CPU */
+
+#ifdef CONFIG_SMP
+	__u64 loops_per_jiffy;
+	int cpu;
+	__u32 socket_id;	/* physical processor socket id */
+	__u16 core_id;		/* core id */
+	__u16 thread_id;	/* thread id */
+	__u16 num_log;		/* Total number of logical processors on
+				 * this socket that were successfully booted */
+	__u8  cores_per_socket;	/* Cores per processor socket */
+	__u8  threads_per_core;	/* Threads per core */
+#endif
+
+	/* CPUID-derived information: */
+	__u64 ppn;
+	__u64 features;
+	__u8 number;
+	__u8 revision;
+	__u8 model;
+	__u8 family;
+	__u8 archrev;
+	char vendor[16];
+	char *model_name;
+
+#ifdef CONFIG_NUMA
+	struct ia64_node_data *node_data;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info);
+
+/*
+ * The "local" data variable.  It refers to the per-CPU data of the currently executing
+ * CPU, much like "current" points to the per-task data of the currently executing task.
+ * Do not use the address of local_cpu_data, since it will be different from
+ * cpu_data(smp_processor_id())!
+ */
+#define local_cpu_data		(&__ia64_per_cpu_var(cpu_info))
+#define cpu_data(cpu)		(&per_cpu(cpu_info, cpu))
+
+extern void print_cpu_info (struct cpuinfo_ia64 *);
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define SET_UNALIGN_CTL(task,value)								\
+({												\
+	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK)			\
+				| (((value) << IA64_THREAD_UAC_SHIFT) & IA64_THREAD_UAC_MASK));	\
+	0;											\
+})
+#define GET_UNALIGN_CTL(task,addr)								\
+({												\
+	put_user(((task)->thread.flags & IA64_THREAD_UAC_MASK) >> IA64_THREAD_UAC_SHIFT,	\
+		 (int __user *) (addr));							\
+})
+
+#define SET_FPEMU_CTL(task,value)								\
+({												\
+	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_FPEMU_MASK)		\
+			  | (((value) << IA64_THREAD_FPEMU_SHIFT) & IA64_THREAD_FPEMU_MASK));	\
+	0;											\
+})
+#define GET_FPEMU_CTL(task,addr)								\
+({												\
+	put_user(((task)->thread.flags & IA64_THREAD_FPEMU_MASK) >> IA64_THREAD_FPEMU_SHIFT,	\
+		 (int __user *) (addr));							\
+})
+
+#ifdef CONFIG_IA32_SUPPORT
+struct desc_struct {
+	unsigned int a, b;
+};
+
+#define desc_empty(desc)		(!((desc)->a | (desc)->b))
+#define desc_equal(desc1, desc2)	(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
+
+#define GDT_ENTRY_TLS_ENTRIES	3
+#define GDT_ENTRY_TLS_MIN	6
+#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+struct ia64_partial_page_list;
+#endif
+
+struct thread_struct {
+	__u32 flags;			/* various thread flags (see IA64_THREAD_*) */
+	/* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */
+	__u8 on_ustack;			/* executing on user-stacks? */
+	__u8 pad[3];
+	__u64 ksp;			/* kernel stack pointer */
+	__u64 map_base;			/* base address for get_unmapped_area() */
+	__u64 task_size;		/* limit for task size */
+	__u64 rbs_bot;			/* the base address for the RBS */
+	int last_fph_cpu;		/* CPU that may hold the contents of f32-f127 */
+
+#ifdef CONFIG_IA32_SUPPORT
+	__u64 eflag;			/* IA32 EFLAGS reg */
+	__u64 fsr;			/* IA32 floating pt status reg */
+	__u64 fcr;			/* IA32 floating pt control reg */
+	__u64 fir;			/* IA32 fp except. instr. reg */
+	__u64 fdr;			/* IA32 fp except. data reg */
+	__u64 old_k1;			/* old value of ar.k1 */
+	__u64 old_iob;			/* old IOBase value */
+	struct ia64_partial_page_list *ppl; /* partial page list for 4K page size issue */
+        /* cached TLS descriptors. */
+	struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+
+# define INIT_THREAD_IA32	.eflag =	0,			\
+				.fsr =		0,			\
+				.fcr =		0x17800000037fULL,	\
+				.fir =		0,			\
+				.fdr =		0,			\
+				.old_k1 =	0,			\
+				.old_iob =	0,			\
+				.ppl =		NULL,
+#else
+# define INIT_THREAD_IA32
+#endif /* CONFIG_IA32_SUPPORT */
+#ifdef CONFIG_PERFMON
+	void *pfm_context;		     /* pointer to detailed PMU context */
+	unsigned long pfm_needs_checking;    /* when >0, pending perfmon work on kernel exit */
+# define INIT_THREAD_PM		.pfm_context =		NULL,     \
+				.pfm_needs_checking =	0UL,
+#else
+# define INIT_THREAD_PM
+#endif
+	__u64 dbr[IA64_NUM_DBG_REGS];
+	__u64 ibr[IA64_NUM_DBG_REGS];
+	struct ia64_fpreg fph[96];	/* saved/loaded on demand */
+};
+
+#define INIT_THREAD {						\
+	.flags =	0,					\
+	.on_ustack =	0,					\
+	.ksp =		0,					\
+	.map_base =	DEFAULT_MAP_BASE,			\
+	.rbs_bot =	STACK_TOP - DEFAULT_USER_STACK_SIZE,	\
+	.task_size =	DEFAULT_TASK_SIZE,			\
+	.last_fph_cpu =  -1,					\
+	INIT_THREAD_IA32					\
+	INIT_THREAD_PM						\
+	.dbr =		{0, },					\
+	.ibr =		{0, },					\
+	.fph =		{{{{0}}}, }				\
+}
+
+#define start_thread(regs,new_ip,new_sp) do {							\
+	set_fs(USER_DS);									\
+	regs->cr_ipsr = ((regs->cr_ipsr | (IA64_PSR_BITS_TO_SET | IA64_PSR_CPL))		\
+			 & ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_RI | IA64_PSR_IS));		\
+	regs->cr_iip = new_ip;									\
+	regs->ar_rsc = 0xf;		/* eager mode, privilege level 3 */			\
+	regs->ar_rnat = 0;									\
+	regs->ar_bspstore = current->thread.rbs_bot;						\
+	regs->ar_fpsr = FPSR_DEFAULT;								\
+	regs->loadrs = 0;									\
+	regs->r8 = get_dumpable(current->mm);	/* set "don't zap registers" flag */		\
+	regs->r12 = new_sp - 16;	/* allocate 16 byte scratch area */			\
+	if (unlikely(!get_dumpable(current->mm))) {							\
+		/*										\
+		 * Zap scratch regs to avoid leaking bits between processes with different	\
+		 * uid/privileges.								\
+		 */										\
+		regs->ar_pfs = 0; regs->b0 = 0; regs->pr = 0;					\
+		regs->r1 = 0; regs->r9  = 0; regs->r11 = 0; regs->r13 = 0; regs->r15 = 0;	\
+	}											\
+} while (0)
+
+/* Forward declarations, a strange C thing... */
+struct mm_struct;
+struct task_struct;
+
+/*
+ * Free all resources held by a thread. This is called after the
+ * parent of DEAD_TASK has collected the exit status of the task via
+ * wait().
+ */
+#define release_thread(dead_task)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * This is the mechanism for creating a new kernel thread.
+ *
+ * NOTE 1: Only a kernel-only process (ie the swapper or direct
+ * descendants who haven't done an "execve()") should use this: it
+ * will work within a system call from a "real" process, but the
+ * process memory space will not be free'd until both the parent and
+ * the child have exited.
+ *
+ * NOTE 2: This MUST NOT be an inlined function.  Otherwise, we get
+ * into trouble in init/main.c when the child thread returns to
+ * do_basic_setup() and the timing is such that free_initmem() has
+ * been called already.
+ */
+extern pid_t kernel_thread (int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Get wait channel for task P.  */
+extern unsigned long get_wchan (struct task_struct *p);
+
+/* Return instruction pointer of blocked task TSK.  */
+#define KSTK_EIP(tsk)					\
+  ({							\
+	struct pt_regs *_regs = task_pt_regs(tsk);	\
+	_regs->cr_iip + ia64_psr(_regs)->ri;		\
+  })
+
+/* Return stack pointer of blocked task TSK.  */
+#define KSTK_ESP(tsk)  ((tsk)->thread.ksp)
+
+extern void ia64_getreg_unknown_kr (void);
+extern void ia64_setreg_unknown_kr (void);
+
+#define ia64_get_kr(regnum)					\
+({								\
+	unsigned long r = 0;					\
+								\
+	switch (regnum) {					\
+	    case 0: r = ia64_getreg(_IA64_REG_AR_KR0); break;	\
+	    case 1: r = ia64_getreg(_IA64_REG_AR_KR1); break;	\
+	    case 2: r = ia64_getreg(_IA64_REG_AR_KR2); break;	\
+	    case 3: r = ia64_getreg(_IA64_REG_AR_KR3); break;	\
+	    case 4: r = ia64_getreg(_IA64_REG_AR_KR4); break;	\
+	    case 5: r = ia64_getreg(_IA64_REG_AR_KR5); break;	\
+	    case 6: r = ia64_getreg(_IA64_REG_AR_KR6); break;	\
+	    case 7: r = ia64_getreg(_IA64_REG_AR_KR7); break;	\
+	    default: ia64_getreg_unknown_kr(); break;		\
+	}							\
+	r;							\
+})
+
+#define ia64_set_kr(regnum, r) 					\
+({								\
+	switch (regnum) {					\
+	    case 0: ia64_setreg(_IA64_REG_AR_KR0, r); break;	\
+	    case 1: ia64_setreg(_IA64_REG_AR_KR1, r); break;	\
+	    case 2: ia64_setreg(_IA64_REG_AR_KR2, r); break;	\
+	    case 3: ia64_setreg(_IA64_REG_AR_KR3, r); break;	\
+	    case 4: ia64_setreg(_IA64_REG_AR_KR4, r); break;	\
+	    case 5: ia64_setreg(_IA64_REG_AR_KR5, r); break;	\
+	    case 6: ia64_setreg(_IA64_REG_AR_KR6, r); break;	\
+	    case 7: ia64_setreg(_IA64_REG_AR_KR7, r); break;	\
+	    default: ia64_setreg_unknown_kr(); break;		\
+	}							\
+})
+
+/*
+ * The following three macros can't be inline functions because we don't have struct
+ * task_struct at this point.
+ */
+
+/*
+ * Return TRUE if task T owns the fph partition of the CPU we're running on.
+ * Must be called from code that has preemption disabled.
+ */
+#define ia64_is_local_fpu_owner(t)								\
+({												\
+	struct task_struct *__ia64_islfo_task = (t);						\
+	(__ia64_islfo_task->thread.last_fph_cpu == smp_processor_id()				\
+	 && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER));	\
+})
+
+/*
+ * Mark task T as owning the fph partition of the CPU we're running on.
+ * Must be called from code that has preemption disabled.
+ */
+#define ia64_set_local_fpu_owner(t) do {						\
+	struct task_struct *__ia64_slfo_task = (t);					\
+	__ia64_slfo_task->thread.last_fph_cpu = smp_processor_id();			\
+	ia64_set_kr(IA64_KR_FPU_OWNER, (unsigned long) __ia64_slfo_task);		\
+} while (0)
+
+/* Mark the fph partition of task T as being invalid on all CPUs.  */
+#define ia64_drop_fpu(t)	((t)->thread.last_fph_cpu = -1)
+
+extern void __ia64_init_fpu (void);
+extern void __ia64_save_fpu (struct ia64_fpreg *fph);
+extern void __ia64_load_fpu (struct ia64_fpreg *fph);
+extern void ia64_save_debug_regs (unsigned long *save_area);
+extern void ia64_load_debug_regs (unsigned long *save_area);
+
+#ifdef CONFIG_IA32_SUPPORT
+extern void ia32_save_state (struct task_struct *task);
+extern void ia32_load_state (struct task_struct *task);
+#endif
+
+#define ia64_fph_enable()	do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+#define ia64_fph_disable()	do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+
+/* load fp 0.0 into fph */
+static inline void
+ia64_init_fpu (void) {
+	ia64_fph_enable();
+	__ia64_init_fpu();
+	ia64_fph_disable();
+}
+
+/* save f32-f127 at FPH */
+static inline void
+ia64_save_fpu (struct ia64_fpreg *fph) {
+	ia64_fph_enable();
+	__ia64_save_fpu(fph);
+	ia64_fph_disable();
+}
+
+/* load f32-f127 from FPH */
+static inline void
+ia64_load_fpu (struct ia64_fpreg *fph) {
+	ia64_fph_enable();
+	__ia64_load_fpu(fph);
+	ia64_fph_disable();
+}
+
+static inline __u64
+ia64_clear_ic (void)
+{
+	__u64 psr;
+	psr = ia64_getreg(_IA64_REG_PSR);
+	ia64_stop();
+	ia64_rsm(IA64_PSR_I | IA64_PSR_IC);
+	ia64_srlz_i();
+	return psr;
+}
+
+/*
+ * Restore the psr.
+ */
+static inline void
+ia64_set_psr (__u64 psr)
+{
+	ia64_stop();
+	ia64_setreg(_IA64_REG_PSR_L, psr);
+	ia64_srlz_i();
+}
+
+/*
+ * Insert a translation into an instruction and/or data translation
+ * register.
+ */
+static inline void
+ia64_itr (__u64 target_mask, __u64 tr_num,
+	  __u64 vmaddr, __u64 pte,
+	  __u64 log_page_size)
+{
+	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+	ia64_stop();
+	if (target_mask & 0x1)
+		ia64_itri(tr_num, pte);
+	if (target_mask & 0x2)
+		ia64_itrd(tr_num, pte);
+}
+
+/*
+ * Insert a translation into the instruction and/or data translation
+ * cache.
+ */
+static inline void
+ia64_itc (__u64 target_mask, __u64 vmaddr, __u64 pte,
+	  __u64 log_page_size)
+{
+	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+	ia64_stop();
+	/* as per EAS2.6, itc must be the last instruction in an instruction group */
+	if (target_mask & 0x1)
+		ia64_itci(pte);
+	if (target_mask & 0x2)
+		ia64_itcd(pte);
+}
+
+/*
+ * Purge a range of addresses from instruction and/or data translation
+ * register(s).
+ */
+static inline void
+ia64_ptr (__u64 target_mask, __u64 vmaddr, __u64 log_size)
+{
+	if (target_mask & 0x1)
+		ia64_ptri(vmaddr, (log_size << 2));
+	if (target_mask & 0x2)
+		ia64_ptrd(vmaddr, (log_size << 2));
+}
+
+/* Set the interrupt vector address.  The address must be suitably aligned (32KB).  */
+static inline void
+ia64_set_iva (void *ivt_addr)
+{
+	ia64_setreg(_IA64_REG_CR_IVA, (__u64) ivt_addr);
+	ia64_srlz_i();
+}
+
+/* Set the page table address and control bits.  */
+static inline void
+ia64_set_pta (__u64 pta)
+{
+	/* Note: srlz.i implies srlz.d */
+	ia64_setreg(_IA64_REG_CR_PTA, pta);
+	ia64_srlz_i();
+}
+
+static inline void
+ia64_eoi (void)
+{
+	ia64_setreg(_IA64_REG_CR_EOI, 0);
+	ia64_srlz_d();
+}
+
+#define cpu_relax()	ia64_hint(ia64_hint_pause)
+
+static inline int
+ia64_get_irr(unsigned int vector)
+{
+	unsigned int reg = vector / 64;
+	unsigned int bit = vector % 64;
+	u64 irr;
+
+	switch (reg) {
+	case 0: irr = ia64_getreg(_IA64_REG_CR_IRR0); break;
+	case 1: irr = ia64_getreg(_IA64_REG_CR_IRR1); break;
+	case 2: irr = ia64_getreg(_IA64_REG_CR_IRR2); break;
+	case 3: irr = ia64_getreg(_IA64_REG_CR_IRR3); break;
+	}
+
+	return test_bit(bit, &irr);
+}
+
+static inline void
+ia64_set_lrr0 (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_LRR0, val);
+	ia64_srlz_d();
+}
+
+static inline void
+ia64_set_lrr1 (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_LRR1, val);
+	ia64_srlz_d();
+}
+
+
+/*
+ * Given the address to which a spill occurred, return the unat bit
+ * number that corresponds to this address.
+ */
+static inline __u64
+ia64_unat_pos (void *spill_addr)
+{
+	return ((__u64) spill_addr >> 3) & 0x3f;
+}
+
+/*
+ * Set the NaT bit of an integer register which was spilled at address
+ * SPILL_ADDR.  UNAT is the mask to be updated.
+ */
+static inline void
+ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat)
+{
+	__u64 bit = ia64_unat_pos(spill_addr);
+	__u64 mask = 1UL << bit;
+
+	*unat = (*unat & ~mask) | (nat << bit);
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ * Note that the only way T can block is through a call to schedule() -> switch_to().
+ */
+static inline unsigned long
+thread_saved_pc (struct task_struct *t)
+{
+	struct unw_frame_info info;
+	unsigned long ip;
+
+	unw_init_from_blocked_task(&info, t);
+	if (unw_unwind(&info) < 0)
+		return 0;
+	unw_get_ip(&info, &ip);
+	return ip;
+}
+
+/*
+ * Get the current instruction/program counter value.
+ */
+#define current_text_addr() \
+	({ void *_pc; _pc = (void *)ia64_getreg(_IA64_REG_IP); _pc; })
+
+static inline __u64
+ia64_get_ivr (void)
+{
+	__u64 r;
+	ia64_srlz_d();
+	r = ia64_getreg(_IA64_REG_CR_IVR);
+	ia64_srlz_d();
+	return r;
+}
+
+static inline void
+ia64_set_dbr (__u64 regnum, __u64 value)
+{
+	__ia64_set_dbr(regnum, value);
+#ifdef CONFIG_ITANIUM
+	ia64_srlz_d();
+#endif
+}
+
+static inline __u64
+ia64_get_dbr (__u64 regnum)
+{
+	__u64 retval;
+
+	retval = __ia64_get_dbr(regnum);
+#ifdef CONFIG_ITANIUM
+	ia64_srlz_d();
+#endif
+	return retval;
+}
+
+static inline __u64
+ia64_rotr (__u64 w, __u64 n)
+{
+	return (w >> n) | (w << (64 - n));
+}
+
+#define ia64_rotl(w,n)	ia64_rotr((w), (64) - (n))
+
+/*
+ * Take a mapped kernel address and return the equivalent address
+ * in the region 7 identity mapped virtual area.
+ */
+static inline void *
+ia64_imva (void *addr)
+{
+	void *result;
+	result = (void *) ia64_tpa(addr);
+	return __va(result);
+}
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define PREFETCH_STRIDE			L1_CACHE_BYTES
+
+static inline void
+prefetch (const void *x)
+{
+	 ia64_lfetch(ia64_lfhint_none, x);
+}
+
+static inline void
+prefetchw (const void *x)
+{
+	ia64_lfetch_excl(ia64_lfhint_none, x);
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+extern unsigned long boot_option_idle_override;
+extern unsigned long idle_halt;
+extern unsigned long idle_nomwait;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PROCESSOR_H */
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
new file mode 100644
index 00000000000..15f8dcfe6ee
--- /dev/null
+++ b/arch/ia64/include/asm/ptrace.h
@@ -0,0 +1,364 @@
+#ifndef _ASM_IA64_PTRACE_H
+#define _ASM_IA64_PTRACE_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2003 Intel Co
+ *	Suresh Siddha <suresh.b.siddha@intel.com>
+ *	Fenghua Yu <fenghua.yu@intel.com>
+ *	Arun Sharma <arun.sharma@intel.com>
+ *
+ * 12/07/98	S. Eranian	added pt_regs & switch_stack
+ * 12/21/98	D. Mosberger	updated to match latest code
+ *  6/17/99	D. Mosberger	added second unat member to "struct switch_stack"
+ *
+ */
+/*
+ * When a user process is blocked, its state looks as follows:
+ *
+ *            +----------------------+	-------	IA64_STK_OFFSET
+ *     	      |			     |	 ^
+ *            | struct pt_regs       |	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *	      |			     |	 |
+ *     	      |	   memory stack	     |	 |
+ *	      |	(growing downwards)  |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *            | struct switch_stack  |	 |
+ *	      |			     |	 |
+ *	      +----------------------+	 |
+ *	      |			     |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *	      |	 register stack	     |	 |
+ *	      |	(growing upwards)    |	 |
+ *            |			     |	 |
+ *	      +----------------------+	 |  ---	IA64_RBS_OFFSET
+ *            |  struct thread_info  |	 |  ^
+ *	      +----------------------+	 |  |
+ *	      |			     |	 |  |
+ *            |  struct task_struct  |	 |  |
+ * current -> |			     |   |  |
+ *	      +----------------------+ -------
+ *
+ * Note that ar.ec is not saved explicitly in pt_reg or switch_stack.
+ * This is because ar.ec is saved as part of ar.pfs.
+ */
+
+
+#include <asm/fpu.h>
+
+#ifdef __KERNEL__
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+
+/*
+ * Base-2 logarithm of number of pages to allocate per task structure
+ * (including register backing store and memory stack):
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define KERNEL_STACK_SIZE_ORDER		3
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define KERNEL_STACK_SIZE_ORDER		2
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define KERNEL_STACK_SIZE_ORDER		1
+#else
+# define KERNEL_STACK_SIZE_ORDER		0
+#endif
+
+#define IA64_RBS_OFFSET			((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31)
+#define IA64_STK_OFFSET			((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
+
+#define KERNEL_STACK_SIZE		IA64_STK_OFFSET
+
+#endif /* __KERNEL__ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are saved on system
+ * calls.
+ *
+ * We don't save all floating point register because the kernel
+ * is compiled to use only a very small subset, so the other are
+ * untouched.
+ *
+ * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE
+ * (because the memory stack pointer MUST ALWAYS be aligned this way)
+ *
+ */
+struct pt_regs {
+	/* The following registers are saved by SAVE_MIN: */
+	unsigned long b6;		/* scratch */
+	unsigned long b7;		/* scratch */
+
+	unsigned long ar_csd;           /* used by cmp8xchg16 (scratch) */
+	unsigned long ar_ssd;           /* reserved for future use (scratch) */
+
+	unsigned long r8;		/* scratch (return value register 0) */
+	unsigned long r9;		/* scratch (return value register 1) */
+	unsigned long r10;		/* scratch (return value register 2) */
+	unsigned long r11;		/* scratch (return value register 3) */
+
+	unsigned long cr_ipsr;		/* interrupted task's psr */
+	unsigned long cr_iip;		/* interrupted task's instruction pointer */
+	/*
+	 * interrupted task's function state; if bit 63 is cleared, it
+	 * contains syscall's ar.pfs.pfm:
+	 */
+	unsigned long cr_ifs;
+
+	unsigned long ar_unat;		/* interrupted task's NaT register (preserved) */
+	unsigned long ar_pfs;		/* prev function state  */
+	unsigned long ar_rsc;		/* RSE configuration */
+	/* The following two are valid only if cr_ipsr.cpl > 0 || ti->flags & _TIF_MCA_INIT */
+	unsigned long ar_rnat;		/* RSE NaT */
+	unsigned long ar_bspstore;	/* RSE bspstore */
+
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+	unsigned long b0;		/* return pointer (bp) */
+	unsigned long loadrs;		/* size of dirty partition << 16 */
+
+	unsigned long r1;		/* the gp pointer */
+	unsigned long r12;		/* interrupted task's memory stack pointer */
+	unsigned long r13;		/* thread pointer */
+
+	unsigned long ar_fpsr;		/* floating point status (preserved) */
+	unsigned long r15;		/* scratch */
+
+	/* The remaining registers are NOT saved for system calls.  */
+
+	unsigned long r14;		/* scratch */
+	unsigned long r2;		/* scratch */
+	unsigned long r3;		/* scratch */
+
+	/* The following registers are saved by SAVE_REST: */
+	unsigned long r16;		/* scratch */
+	unsigned long r17;		/* scratch */
+	unsigned long r18;		/* scratch */
+	unsigned long r19;		/* scratch */
+	unsigned long r20;		/* scratch */
+	unsigned long r21;		/* scratch */
+	unsigned long r22;		/* scratch */
+	unsigned long r23;		/* scratch */
+	unsigned long r24;		/* scratch */
+	unsigned long r25;		/* scratch */
+	unsigned long r26;		/* scratch */
+	unsigned long r27;		/* scratch */
+	unsigned long r28;		/* scratch */
+	unsigned long r29;		/* scratch */
+	unsigned long r30;		/* scratch */
+	unsigned long r31;		/* scratch */
+
+	unsigned long ar_ccv;		/* compare/exchange value (scratch) */
+
+	/*
+	 * Floating point registers that the kernel considers scratch:
+	 */
+	struct ia64_fpreg f6;		/* scratch */
+	struct ia64_fpreg f7;		/* scratch */
+	struct ia64_fpreg f8;		/* scratch */
+	struct ia64_fpreg f9;		/* scratch */
+	struct ia64_fpreg f10;		/* scratch */
+	struct ia64_fpreg f11;		/* scratch */
+};
+
+/*
+ * This structure contains the addition registers that need to
+ * preserved across a context switch.  This generally consists of
+ * "preserved" registers.
+ */
+struct switch_stack {
+	unsigned long caller_unat;	/* user NaT collection register (preserved) */
+	unsigned long ar_fpsr;		/* floating-point status register */
+
+	struct ia64_fpreg f2;		/* preserved */
+	struct ia64_fpreg f3;		/* preserved */
+	struct ia64_fpreg f4;		/* preserved */
+	struct ia64_fpreg f5;		/* preserved */
+
+	struct ia64_fpreg f12;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f13;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f14;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f15;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f16;		/* preserved */
+	struct ia64_fpreg f17;		/* preserved */
+	struct ia64_fpreg f18;		/* preserved */
+	struct ia64_fpreg f19;		/* preserved */
+	struct ia64_fpreg f20;		/* preserved */
+	struct ia64_fpreg f21;		/* preserved */
+	struct ia64_fpreg f22;		/* preserved */
+	struct ia64_fpreg f23;		/* preserved */
+	struct ia64_fpreg f24;		/* preserved */
+	struct ia64_fpreg f25;		/* preserved */
+	struct ia64_fpreg f26;		/* preserved */
+	struct ia64_fpreg f27;		/* preserved */
+	struct ia64_fpreg f28;		/* preserved */
+	struct ia64_fpreg f29;		/* preserved */
+	struct ia64_fpreg f30;		/* preserved */
+	struct ia64_fpreg f31;		/* preserved */
+
+	unsigned long r4;		/* preserved */
+	unsigned long r5;		/* preserved */
+	unsigned long r6;		/* preserved */
+	unsigned long r7;		/* preserved */
+
+	unsigned long b0;		/* so we can force a direct return in copy_thread */
+	unsigned long b1;
+	unsigned long b2;
+	unsigned long b3;
+	unsigned long b4;
+	unsigned long b5;
+
+	unsigned long ar_pfs;		/* previous function state */
+	unsigned long ar_lc;		/* loop counter (preserved) */
+	unsigned long ar_unat;		/* NaT bits for r4-r7 */
+	unsigned long ar_rnat;		/* RSE NaT collection register */
+	unsigned long ar_bspstore;	/* RSE dirty base (preserved) */
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+};
+
+#ifdef __KERNEL__
+
+#include <asm/current.h>
+#include <asm/page.h>
+
+/*
+ * We use the ia64_psr(regs)->ri to determine which of the three
+ * instructions in bundle (16 bytes) took the sample. Generate
+ * the canonical representation by adding to instruction pointer.
+ */
+# define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri)
+
+#define regs_return_value(regs) ((regs)->r8)
+
+/* Conserve space in histogram by encoding slot bits in address
+ * bits 2 and 3 rather than bits 0 and 1.
+ */
+#define profile_pc(regs)						\
+({									\
+	unsigned long __ip = instruction_pointer(regs);			\
+	(__ip & ~3UL) + ((__ip & 3UL) << 2);				\
+})
+
+  /* given a pointer to a task_struct, return the user's pt_regs */
+# define task_pt_regs(t)		(((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1)
+# define ia64_psr(regs)			((struct ia64_psr *) &(regs)->cr_ipsr)
+# define user_mode(regs)		(((struct ia64_psr *) &(regs)->cr_ipsr)->cpl != 0)
+# define user_stack(task,regs)	((long) regs - (long) task == IA64_STK_OFFSET - sizeof(*regs))
+# define fsys_mode(task,regs)					\
+  ({								\
+	  struct task_struct *_task = (task);			\
+	  struct pt_regs *_regs = (regs);			\
+	  !user_mode(_regs) && user_stack(_task, _regs);	\
+  })
+
+  /*
+   * System call handlers that, upon successful completion, need to return a negative value
+   * should call force_successful_syscall_return() right before returning.  On architectures
+   * where the syscall convention provides for a separate error flag (e.g., alpha, ia64,
+   * ppc{,64}, sparc{,64}, possibly others), this macro can be used to ensure that the error
+   * flag will not get set.  On architectures which do not support a separate error flag,
+   * the macro is a no-op and the spurious error condition needs to be filtered out by some
+   * other means (e.g., in user-level, by passing an extra argument to the syscall handler,
+   * or something along those lines).
+   *
+   * On ia64, we can clear the user's pt_regs->r8 to force a successful syscall.
+   */
+# define force_successful_syscall_return()	(task_pt_regs(current)->r8 = 0)
+
+  struct task_struct;			/* forward decl */
+  struct unw_frame_info;		/* forward decl */
+
+  extern void show_regs (struct pt_regs *);
+  extern void ia64_do_show_stack (struct unw_frame_info *, void *);
+  extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *,
+					      unsigned long *);
+  extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long,
+			 unsigned long, long *);
+  extern long ia64_poke (struct task_struct *, struct switch_stack *, unsigned long,
+			 unsigned long, long);
+  extern void ia64_flush_fph (struct task_struct *);
+  extern void ia64_sync_fph (struct task_struct *);
+  extern void ia64_sync_krbs(void);
+  extern long ia64_sync_user_rbs (struct task_struct *, struct switch_stack *,
+				  unsigned long, unsigned long);
+
+  /* get nat bits for scratch registers such that bit N==1 iff scratch register rN is a NaT */
+  extern unsigned long ia64_get_scratch_nat_bits (struct pt_regs *pt, unsigned long scratch_unat);
+  /* put nat bits for scratch registers such that scratch register rN is a NaT iff bit N==1 */
+  extern unsigned long ia64_put_scratch_nat_bits (struct pt_regs *pt, unsigned long nat);
+
+  extern void ia64_increment_ip (struct pt_regs *pt);
+  extern void ia64_decrement_ip (struct pt_regs *pt);
+
+  extern void ia64_ptrace_stop(void);
+  #define arch_ptrace_stop(code, info) \
+	ia64_ptrace_stop()
+  #define arch_ptrace_stop_needed(code, info) \
+	(!test_thread_flag(TIF_RESTORE_RSE))
+
+  extern void ptrace_attach_sync_user_rbs (struct task_struct *);
+  #define arch_ptrace_attach(child) \
+	ptrace_attach_sync_user_rbs(child)
+
+  #define arch_has_single_step()  (1)
+  extern void user_enable_single_step(struct task_struct *);
+  extern void user_disable_single_step(struct task_struct *);
+
+  #define arch_has_block_step()   (1)
+  extern void user_enable_block_step(struct task_struct *);
+
+#endif /* !__KERNEL__ */
+
+/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
+struct pt_all_user_regs {
+	unsigned long nat;
+	unsigned long cr_iip;
+	unsigned long cfm;
+	unsigned long cr_ipsr;
+	unsigned long pr;
+
+	unsigned long gr[32];
+	unsigned long br[8];
+	unsigned long ar[128];
+	struct ia64_fpreg fr[128];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* indices to application-registers array in pt_all_user_regs */
+#define PT_AUR_RSC	16
+#define PT_AUR_BSP	17
+#define PT_AUR_BSPSTORE	18
+#define PT_AUR_RNAT	19
+#define PT_AUR_CCV	32
+#define PT_AUR_UNAT	36
+#define PT_AUR_FPSR	40
+#define PT_AUR_PFS	64
+#define PT_AUR_LC	65
+#define PT_AUR_EC	66
+
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ */
+#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+#define PTRACE_OLD_GETSIGINFO	13	/* (replaced by PTRACE_GETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_OLD_SETSIGINFO	14	/* (replaced by PTRACE_SETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_GETREGS		18	/* get all registers (pt_all_user_regs) in one shot */
+#define PTRACE_SETREGS		19	/* set all registers (pt_all_user_regs) in one shot */
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#endif /* _ASM_IA64_PTRACE_H */
diff --git a/arch/ia64/include/asm/ptrace_offsets.h b/arch/ia64/include/asm/ptrace_offsets.h
new file mode 100644
index 00000000000..b712773c759
--- /dev/null
+++ b/arch/ia64/include/asm/ptrace_offsets.h
@@ -0,0 +1,268 @@
+#ifndef _ASM_IA64_PTRACE_OFFSETS_H
+#define _ASM_IA64_PTRACE_OFFSETS_H
+
+/*
+ * Copyright (C) 1999, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * The "uarea" that can be accessed via PEEKUSER and POKEUSER is a
+ * virtual structure that would have the following definition:
+ *
+ *	struct uarea {
+ *		struct ia64_fpreg fph[96];		// f32-f127
+ *		unsigned long nat_bits;
+ *		unsigned long empty1;
+ *		struct ia64_fpreg f2;			// f2-f5
+ *			:
+ *		struct ia64_fpreg f5;
+ *		struct ia64_fpreg f10;			// f10-f31
+ *			:
+ *		struct ia64_fpreg f31;
+ *		unsigned long r4;			// r4-r7
+ *			:
+ *		unsigned long r7;
+ *		unsigned long b1;			// b1-b5
+ *			:
+ *		unsigned long b5;
+ *		unsigned long ar_ec;
+ *		unsigned long ar_lc;
+ *		unsigned long empty2[5];
+ *		unsigned long cr_ipsr;
+ *		unsigned long cr_iip;
+ *		unsigned long cfm;
+ *		unsigned long ar_unat;
+ *		unsigned long ar_pfs;
+ *		unsigned long ar_rsc;
+ *		unsigned long ar_rnat;
+ *		unsigned long ar_bspstore;
+ *		unsigned long pr;
+ *		unsigned long b6;
+ *		unsigned long ar_bsp;
+ *		unsigned long r1;
+ *		unsigned long r2;
+ *		unsigned long r3;
+ *		unsigned long r12;
+ *		unsigned long r13;
+ *		unsigned long r14;
+ *		unsigned long r15;
+ *		unsigned long r8;
+ *		unsigned long r9;
+ *		unsigned long r10;
+ *		unsigned long r11;
+ *		unsigned long r16;
+ *			:
+ *		unsigned long r31;
+ *		unsigned long ar_ccv;
+ *		unsigned long ar_fpsr;
+ *		unsigned long b0;
+ *		unsigned long b7;
+ *		unsigned long f6;
+ *		unsigned long f7;
+ *		unsigned long f8;
+ *		unsigned long f9;
+ *		unsigned long ar_csd;
+ *		unsigned long ar_ssd;
+ *		unsigned long rsvd1[710];
+ *		unsigned long dbr[8];
+ *		unsigned long rsvd2[504];
+ *		unsigned long ibr[8];
+ *		unsigned long rsvd3[504];
+ *		unsigned long pmd[4];
+ *	}
+ */
+
+/* fph: */
+#define PT_F32			0x0000
+#define PT_F33			0x0010
+#define PT_F34			0x0020
+#define PT_F35			0x0030
+#define PT_F36			0x0040
+#define PT_F37			0x0050
+#define PT_F38			0x0060
+#define PT_F39			0x0070
+#define PT_F40			0x0080
+#define PT_F41			0x0090
+#define PT_F42			0x00a0
+#define PT_F43			0x00b0
+#define PT_F44			0x00c0
+#define PT_F45			0x00d0
+#define PT_F46			0x00e0
+#define PT_F47			0x00f0
+#define PT_F48			0x0100
+#define PT_F49			0x0110
+#define PT_F50			0x0120
+#define PT_F51			0x0130
+#define PT_F52			0x0140
+#define PT_F53			0x0150
+#define PT_F54			0x0160
+#define PT_F55			0x0170
+#define PT_F56			0x0180
+#define PT_F57			0x0190
+#define PT_F58			0x01a0
+#define PT_F59			0x01b0
+#define PT_F60			0x01c0
+#define PT_F61			0x01d0
+#define PT_F62			0x01e0
+#define PT_F63			0x01f0
+#define PT_F64			0x0200
+#define PT_F65			0x0210
+#define PT_F66			0x0220
+#define PT_F67			0x0230
+#define PT_F68			0x0240
+#define PT_F69			0x0250
+#define PT_F70			0x0260
+#define PT_F71			0x0270
+#define PT_F72			0x0280
+#define PT_F73			0x0290
+#define PT_F74			0x02a0
+#define PT_F75			0x02b0
+#define PT_F76			0x02c0
+#define PT_F77			0x02d0
+#define PT_F78			0x02e0
+#define PT_F79			0x02f0
+#define PT_F80			0x0300
+#define PT_F81			0x0310
+#define PT_F82			0x0320
+#define PT_F83			0x0330
+#define PT_F84			0x0340
+#define PT_F85			0x0350
+#define PT_F86			0x0360
+#define PT_F87			0x0370
+#define PT_F88			0x0380
+#define PT_F89			0x0390
+#define PT_F90			0x03a0
+#define PT_F91			0x03b0
+#define PT_F92			0x03c0
+#define PT_F93			0x03d0
+#define PT_F94			0x03e0
+#define PT_F95			0x03f0
+#define PT_F96			0x0400
+#define PT_F97			0x0410
+#define PT_F98			0x0420
+#define PT_F99			0x0430
+#define PT_F100			0x0440
+#define PT_F101			0x0450
+#define PT_F102			0x0460
+#define PT_F103			0x0470
+#define PT_F104			0x0480
+#define PT_F105			0x0490
+#define PT_F106			0x04a0
+#define PT_F107			0x04b0
+#define PT_F108			0x04c0
+#define PT_F109			0x04d0
+#define PT_F110			0x04e0
+#define PT_F111			0x04f0
+#define PT_F112			0x0500
+#define PT_F113			0x0510
+#define PT_F114			0x0520
+#define PT_F115			0x0530
+#define PT_F116			0x0540
+#define PT_F117			0x0550
+#define PT_F118			0x0560
+#define PT_F119			0x0570
+#define PT_F120			0x0580
+#define PT_F121			0x0590
+#define PT_F122			0x05a0
+#define PT_F123			0x05b0
+#define PT_F124			0x05c0
+#define PT_F125			0x05d0
+#define PT_F126			0x05e0
+#define PT_F127			0x05f0
+
+#define PT_NAT_BITS		0x0600
+
+#define PT_F2			0x0610
+#define PT_F3			0x0620
+#define PT_F4			0x0630
+#define PT_F5			0x0640
+#define PT_F10			0x0650
+#define PT_F11			0x0660
+#define PT_F12			0x0670
+#define PT_F13			0x0680
+#define PT_F14			0x0690
+#define PT_F15			0x06a0
+#define PT_F16			0x06b0
+#define PT_F17			0x06c0
+#define PT_F18			0x06d0
+#define PT_F19			0x06e0
+#define PT_F20			0x06f0
+#define PT_F21			0x0700
+#define PT_F22			0x0710
+#define PT_F23			0x0720
+#define PT_F24			0x0730
+#define PT_F25			0x0740
+#define PT_F26			0x0750
+#define PT_F27			0x0760
+#define PT_F28			0x0770
+#define PT_F29			0x0780
+#define PT_F30			0x0790
+#define PT_F31			0x07a0
+#define PT_R4			0x07b0
+#define PT_R5			0x07b8
+#define PT_R6			0x07c0
+#define PT_R7			0x07c8
+
+#define PT_B1			0x07d8
+#define PT_B2			0x07e0
+#define PT_B3			0x07e8
+#define PT_B4			0x07f0
+#define PT_B5			0x07f8
+
+#define PT_AR_EC		0x0800
+#define PT_AR_LC		0x0808
+
+#define PT_CR_IPSR		0x0830
+#define PT_CR_IIP		0x0838
+#define PT_CFM			0x0840
+#define PT_AR_UNAT		0x0848
+#define PT_AR_PFS		0x0850
+#define PT_AR_RSC		0x0858
+#define PT_AR_RNAT		0x0860
+#define PT_AR_BSPSTORE		0x0868
+#define PT_PR			0x0870
+#define PT_B6			0x0878
+#define PT_AR_BSP		0x0880	/* note: this points to the *end* of the backing store! */
+#define PT_R1			0x0888
+#define PT_R2			0x0890
+#define PT_R3			0x0898
+#define PT_R12			0x08a0
+#define PT_R13			0x08a8
+#define PT_R14			0x08b0
+#define PT_R15			0x08b8
+#define PT_R8 			0x08c0
+#define PT_R9			0x08c8
+#define PT_R10			0x08d0
+#define PT_R11			0x08d8
+#define PT_R16			0x08e0
+#define PT_R17			0x08e8
+#define PT_R18			0x08f0
+#define PT_R19			0x08f8
+#define PT_R20			0x0900
+#define PT_R21			0x0908
+#define PT_R22			0x0910
+#define PT_R23			0x0918
+#define PT_R24			0x0920
+#define PT_R25			0x0928
+#define PT_R26			0x0930
+#define PT_R27			0x0938
+#define PT_R28			0x0940
+#define PT_R29			0x0948
+#define PT_R30			0x0950
+#define PT_R31			0x0958
+#define PT_AR_CCV		0x0960
+#define PT_AR_FPSR		0x0968
+#define PT_B0			0x0970
+#define PT_B7			0x0978
+#define PT_F6			0x0980
+#define PT_F7			0x0990
+#define PT_F8			0x09a0
+#define PT_F9			0x09b0
+#define PT_AR_CSD		0x09c0
+#define PT_AR_SSD		0x09c8
+
+#define PT_DBR			0x2000	/* data breakpoint registers */
+#define PT_IBR			0x3000	/* instruction breakpoint registers */
+#define PT_PMD			0x4000	/* performance monitoring counters */
+
+#endif /* _ASM_IA64_PTRACE_OFFSETS_H */
diff --git a/arch/ia64/include/asm/resource.h b/arch/ia64/include/asm/resource.h
new file mode 100644
index 00000000000..ba2272a87fc
--- /dev/null
+++ b/arch/ia64/include/asm/resource.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_IA64_RESOURCE_H
+#define _ASM_IA64_RESOURCE_H
+
+#include <asm/ustack.h>
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_IA64_RESOURCE_H */
diff --git a/arch/ia64/include/asm/rse.h b/arch/ia64/include/asm/rse.h
new file mode 100644
index 00000000000..02830a3b019
--- /dev/null
+++ b/arch/ia64/include/asm/rse.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_RSE_H
+#define _ASM_IA64_RSE_H
+
+/*
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * Register stack engine related helper functions.  This file may be
+ * used in applications, so be careful about the name-space and give
+ * some consideration to non-GNU C compilers (though __inline__ is
+ * fine).
+ */
+
+static __inline__ unsigned long
+ia64_rse_slot_num (unsigned long *addr)
+{
+	return (((unsigned long) addr) >> 3) & 0x3f;
+}
+
+/*
+ * Return TRUE if ADDR is the address of an RNAT slot.
+ */
+static __inline__ unsigned long
+ia64_rse_is_rnat_slot (unsigned long *addr)
+{
+	return ia64_rse_slot_num(addr) == 0x3f;
+}
+
+/*
+ * Returns the address of the RNAT slot that covers the slot at
+ * address SLOT_ADDR.
+ */
+static __inline__ unsigned long *
+ia64_rse_rnat_addr (unsigned long *slot_addr)
+{
+	return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3));
+}
+
+/*
+ * Calculate the number of registers in the dirty partition starting at BSPSTORE and
+ * ending at BSP.  This isn't simply (BSP-BSPSTORE)/8 because every 64th slot stores
+ * ar.rnat.
+ */
+static __inline__ unsigned long
+ia64_rse_num_regs (unsigned long *bspstore, unsigned long *bsp)
+{
+	unsigned long slots = (bsp - bspstore);
+
+	return slots - (ia64_rse_slot_num(bspstore) + slots)/0x40;
+}
+
+/*
+ * The inverse of the above: given bspstore and the number of
+ * registers, calculate ar.bsp.
+ */
+static __inline__ unsigned long *
+ia64_rse_skip_regs (unsigned long *addr, long num_regs)
+{
+	long delta = ia64_rse_slot_num(addr) + num_regs;
+
+	if (num_regs < 0)
+		delta -= 0x3e;
+	return addr + num_regs + delta/0x3f;
+}
+
+#endif /* _ASM_IA64_RSE_H */
diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h
new file mode 100644
index 00000000000..fbee74b1578
--- /dev/null
+++ b/arch/ia64/include/asm/rwsem.h
@@ -0,0 +1,182 @@
+/*
+ * R/W semaphores for ia64
+ *
+ * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
+ * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 2005 Christoph Lameter <clameter@sgi.com>
+ *
+ * Based on asm-i386/rwsem.h and other architecture implementation.
+ *
+ * The MSW of the count is the negated number of active writers and
+ * waiting lockers, and the LSW is the total number of active locks.
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffffffff00000001 for
+ * the case of an uncontended lock. Readers increment by 1 and see a positive
+ * value when uncontended, negative if there are writers (and maybe) readers
+ * waiting (in which case it goes to sleep).
+ */
+
+#ifndef _ASM_IA64_RWSEM_H
+#define _ASM_IA64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed long		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+};
+
+#define RWSEM_UNLOCKED_VALUE		__IA64_UL_CONST(0x0000000000000000)
+#define RWSEM_ACTIVE_BIAS		__IA64_UL_CONST(0x0000000000000001)
+#define RWSEM_ACTIVE_MASK		__IA64_UL_CONST(0x00000000ffffffff)
+#define RWSEM_WAITING_BIAS		-__IA64_UL_CONST(0x0000000100000000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void
+init_rwsem (struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+/*
+ * lock for reading
+ */
+static inline void
+__down_read (struct rw_semaphore *sem)
+{
+	long result = ia64_fetchadd8_acq((unsigned long *)&sem->count, 1);
+
+	if (result < 0)
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * lock for writing
+ */
+static inline void
+__down_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old + RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_acq(&sem->count, old, new) != old);
+
+	if (old != 0)
+		rwsem_down_write_failed(sem);
+}
+
+/*
+ * unlock after reading
+ */
+static inline void
+__up_read (struct rw_semaphore *sem)
+{
+	long result = ia64_fetchadd8_rel((unsigned long *)&sem->count, -1);
+
+	if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void
+__up_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_read_trylock (struct rw_semaphore *sem)
+{
+	long tmp;
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_write_trylock (struct rw_semaphore *sem)
+{
+	long tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE,
+			      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void
+__downgrade_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_WAITING_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (old < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * Implement atomic add functionality.  These used to be "inline" functions, but GCC v3.1
+ * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd.
+ */
+#define rwsem_atomic_add(delta, sem)	atomic64_add(delta, (atomic64_t *)(&(sem)->count))
+#define rwsem_atomic_update(delta, sem)	atomic64_add_return(delta, (atomic64_t *)(&(sem)->count))
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* _ASM_IA64_RWSEM_H */
diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h
new file mode 100644
index 00000000000..ea310c0812a
--- /dev/null
+++ b/arch/ia64/include/asm/sal.h
@@ -0,0 +1,905 @@
+#ifndef _ASM_IA64_SAL_H
+#define _ASM_IA64_SAL_H
+
+/*
+ * System Abstraction Layer definitions.
+ *
+ * This is based on version 2.5 of the manual "IA-64 System
+ * Abstraction Layer".
+ *
+ * Copyright (C) 2001 Intel
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2001 Fred Lewis <frederick.v.lewis@intel.com>
+ * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ *
+ * 02/01/04 J. Hall Updated Error Record Structures to conform to July 2001
+ *		    revision of the SAL spec.
+ * 01/01/03 fvlewis Updated Error Record Structures to conform with Nov. 2000
+ *                  revision of the SAL spec.
+ * 99/09/29 davidm	Updated for SAL 2.6.
+ * 00/03/29 cfleck      Updated SAL Error Logging info for processor (SAL 2.6)
+ *                      (plus examples of platform error info structures from smariset @ Intel)
+ */
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT		0
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT	1
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT	2
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT	 	3
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK	  (1<<IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT	  (1<<IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bcd.h>
+#include <linux/spinlock.h>
+#include <linux/efi.h>
+
+#include <asm/pal.h>
+#include <asm/system.h>
+#include <asm/fpu.h>
+
+extern spinlock_t sal_lock;
+
+/* SAL spec _requires_ eight args for each call. */
+#define __IA64_FW_CALL(entry,result,a0,a1,a2,a3,a4,a5,a6,a7)	\
+	result = (*entry)(a0,a1,a2,a3,a4,a5,a6,a7)
+
+# define IA64_FW_CALL(entry,result,args...) do {		\
+	unsigned long __ia64_sc_flags;				\
+	struct ia64_fpreg __ia64_sc_fr[6];			\
+	ia64_save_scratch_fpregs(__ia64_sc_fr);			\
+	spin_lock_irqsave(&sal_lock, __ia64_sc_flags);		\
+	__IA64_FW_CALL(entry, result, args);			\
+	spin_unlock_irqrestore(&sal_lock, __ia64_sc_flags);	\
+	ia64_load_scratch_fpregs(__ia64_sc_fr);			\
+} while (0)
+
+# define SAL_CALL(result,args...)			\
+	IA64_FW_CALL(ia64_sal, result, args);
+
+# define SAL_CALL_NOLOCK(result,args...) do {		\
+	unsigned long __ia64_scn_flags;			\
+	struct ia64_fpreg __ia64_scn_fr[6];		\
+	ia64_save_scratch_fpregs(__ia64_scn_fr);	\
+	local_irq_save(__ia64_scn_flags);		\
+	__IA64_FW_CALL(ia64_sal, result, args);		\
+	local_irq_restore(__ia64_scn_flags);		\
+	ia64_load_scratch_fpregs(__ia64_scn_fr);	\
+} while (0)
+
+# define SAL_CALL_REENTRANT(result,args...) do {	\
+	struct ia64_fpreg __ia64_scs_fr[6];		\
+	ia64_save_scratch_fpregs(__ia64_scs_fr);	\
+	preempt_disable();				\
+	__IA64_FW_CALL(ia64_sal, result, args);		\
+	preempt_enable();				\
+	ia64_load_scratch_fpregs(__ia64_scs_fr);	\
+} while (0)
+
+#define SAL_SET_VECTORS			0x01000000
+#define SAL_GET_STATE_INFO		0x01000001
+#define SAL_GET_STATE_INFO_SIZE		0x01000002
+#define SAL_CLEAR_STATE_INFO		0x01000003
+#define SAL_MC_RENDEZ			0x01000004
+#define SAL_MC_SET_PARAMS		0x01000005
+#define SAL_REGISTER_PHYSICAL_ADDR	0x01000006
+
+#define SAL_CACHE_FLUSH			0x01000008
+#define SAL_CACHE_INIT			0x01000009
+#define SAL_PCI_CONFIG_READ		0x01000010
+#define SAL_PCI_CONFIG_WRITE		0x01000011
+#define SAL_FREQ_BASE			0x01000012
+#define SAL_PHYSICAL_ID_INFO		0x01000013
+
+#define SAL_UPDATE_PAL			0x01000020
+
+struct ia64_sal_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...);
+
+enum {
+	SAL_FREQ_BASE_PLATFORM = 0,
+	SAL_FREQ_BASE_INTERVAL_TIMER = 1,
+	SAL_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+/*
+ * The SAL system table is followed by a variable number of variable
+ * length descriptors.  The structure of these descriptors follows
+ * below.
+ * The defininition follows SAL specs from July 2000
+ */
+struct ia64_sal_systab {
+	u8 signature[4];	/* should be "SST_" */
+	u32 size;		/* size of this table in bytes */
+	u8 sal_rev_minor;
+	u8 sal_rev_major;
+	u16 entry_count;	/* # of entries in variable portion */
+	u8 checksum;
+	u8 reserved1[7];
+	u8 sal_a_rev_minor;
+	u8 sal_a_rev_major;
+	u8 sal_b_rev_minor;
+	u8 sal_b_rev_major;
+	/* oem_id & product_id: terminating NUL is missing if string is exactly 32 bytes long. */
+	u8 oem_id[32];
+	u8 product_id[32];	/* ASCII product id  */
+	u8 reserved2[8];
+};
+
+enum sal_systab_entry_type {
+	SAL_DESC_ENTRY_POINT = 0,
+	SAL_DESC_MEMORY = 1,
+	SAL_DESC_PLATFORM_FEATURE = 2,
+	SAL_DESC_TR = 3,
+	SAL_DESC_PTC = 4,
+	SAL_DESC_AP_WAKEUP = 5
+};
+
+/*
+ * Entry type:	Size:
+ *	0	48
+ *	1	32
+ *	2	16
+ *	3	32
+ *	4	16
+ *	5	16
+ */
+#define SAL_DESC_SIZE(type)	"\060\040\020\040\020\020"[(unsigned) type]
+
+typedef struct ia64_sal_desc_entry_point {
+	u8 type;
+	u8 reserved1[7];
+	u64 pal_proc;
+	u64 sal_proc;
+	u64 gp;
+	u8 reserved2[16];
+}ia64_sal_desc_entry_point_t;
+
+typedef struct ia64_sal_desc_memory {
+	u8 type;
+	u8 used_by_sal;	/* needs to be mapped for SAL? */
+	u8 mem_attr;		/* current memory attribute setting */
+	u8 access_rights;	/* access rights set up by SAL */
+	u8 mem_attr_mask;	/* mask of supported memory attributes */
+	u8 reserved1;
+	u8 mem_type;		/* memory type */
+	u8 mem_usage;		/* memory usage */
+	u64 addr;		/* physical address of memory */
+	u32 length;	/* length (multiple of 4KB pages) */
+	u32 reserved2;
+	u8 oem_reserved[8];
+} ia64_sal_desc_memory_t;
+
+typedef struct ia64_sal_desc_platform_feature {
+	u8 type;
+	u8 feature_mask;
+	u8 reserved1[14];
+} ia64_sal_desc_platform_feature_t;
+
+typedef struct ia64_sal_desc_tr {
+	u8 type;
+	u8 tr_type;		/* 0 == instruction, 1 == data */
+	u8 regnum;		/* translation register number */
+	u8 reserved1[5];
+	u64 addr;		/* virtual address of area covered */
+	u64 page_size;		/* encoded page size */
+	u8 reserved2[8];
+} ia64_sal_desc_tr_t;
+
+typedef struct ia64_sal_desc_ptc {
+	u8 type;
+	u8 reserved1[3];
+	u32 num_domains;	/* # of coherence domains */
+	u64 domain_info;	/* physical address of domain info table */
+} ia64_sal_desc_ptc_t;
+
+typedef struct ia64_sal_ptc_domain_info {
+	u64 proc_count;		/* number of processors in domain */
+	u64 proc_list;		/* physical address of LID array */
+} ia64_sal_ptc_domain_info_t;
+
+typedef struct ia64_sal_ptc_domain_proc_entry {
+	u64 id  : 8;		/* id of processor */
+	u64 eid : 8;		/* eid of processor */
+} ia64_sal_ptc_domain_proc_entry_t;
+
+
+#define IA64_SAL_AP_EXTERNAL_INT 0
+
+typedef struct ia64_sal_desc_ap_wakeup {
+	u8 type;
+	u8 mechanism;		/* 0 == external interrupt */
+	u8 reserved1[6];
+	u64 vector;		/* interrupt vector in range 0x10-0xff */
+} ia64_sal_desc_ap_wakeup_t ;
+
+extern ia64_sal_handler ia64_sal;
+extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
+
+extern unsigned short sal_revision;	/* supported SAL spec revision */
+extern unsigned short sal_version;	/* SAL version; OEM dependent */
+#define SAL_VERSION_CODE(major, minor) ((bin2bcd(major) << 8) | bin2bcd(minor))
+
+extern const char *ia64_sal_strerror (long status);
+extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
+
+/* SAL information type encodings */
+enum {
+	SAL_INFO_TYPE_MCA  = 0,		/* Machine check abort information */
+        SAL_INFO_TYPE_INIT = 1,		/* Init information */
+        SAL_INFO_TYPE_CMC  = 2,		/* Corrected machine check information */
+        SAL_INFO_TYPE_CPE  = 3		/* Corrected platform error information */
+};
+
+/* Encodings for machine check parameter types */
+enum {
+	SAL_MC_PARAM_RENDEZ_INT    = 1,	/* Rendezvous interrupt */
+	SAL_MC_PARAM_RENDEZ_WAKEUP = 2,	/* Wakeup */
+	SAL_MC_PARAM_CPE_INT	   = 3	/* Corrected Platform Error Int */
+};
+
+/* Encodings for rendezvous mechanisms */
+enum {
+	SAL_MC_PARAM_MECHANISM_INT = 1,	/* Use interrupt */
+	SAL_MC_PARAM_MECHANISM_MEM = 2	/* Use memory synchronization variable*/
+};
+
+/* Encodings for vectors which can be registered by the OS with SAL */
+enum {
+	SAL_VECTOR_OS_MCA	  = 0,
+	SAL_VECTOR_OS_INIT	  = 1,
+	SAL_VECTOR_OS_BOOT_RENDEZ = 2
+};
+
+/* Encodings for mca_opt parameter sent to SAL_MC_SET_PARAMS */
+#define	SAL_MC_PARAM_RZ_ALWAYS		0x1
+#define	SAL_MC_PARAM_BINIT_ESCALATE	0x10
+
+/*
+ * Definition of the SAL Error Log from the SAL spec
+ */
+
+/* SAL Error Record Section GUID Definitions */
+#define SAL_PROC_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf1, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_MEM_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf2, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SEL_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf3, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_BUS_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf4, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf5, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_COMP_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf6, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SPECIFIC_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf7, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_HOST_CTLR_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_BUS_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID \
+    EFI_GUID(0x6cb0a200, 0x893a, 0x11da, 0x96, 0xd2, 0x0, 0x10, 0x83, 0xff, \
+		0xca, 0x4d)
+
+#define MAX_CACHE_ERRORS	6
+#define MAX_TLB_ERRORS		6
+#define MAX_BUS_ERRORS		1
+
+/* Definition of version  according to SAL spec for logging purposes */
+typedef struct sal_log_revision {
+	u8 minor;		/* BCD (0..99) */
+	u8 major;		/* BCD (0..99) */
+} sal_log_revision_t;
+
+/* Definition of timestamp according to SAL spec for logging purposes */
+typedef struct sal_log_timestamp {
+	u8 slh_second;		/* Second (0..59) */
+	u8 slh_minute;		/* Minute (0..59) */
+	u8 slh_hour;		/* Hour (0..23) */
+	u8 slh_reserved;
+	u8 slh_day;		/* Day (1..31) */
+	u8 slh_month;		/* Month (1..12) */
+	u8 slh_year;		/* Year (00..99) */
+	u8 slh_century;		/* Century (19, 20, 21, ...) */
+} sal_log_timestamp_t;
+
+/* Definition of log record  header structures */
+typedef struct sal_log_record_header {
+	u64 id;				/* Unique monotonically increasing ID */
+	sal_log_revision_t revision;	/* Major and Minor revision of header */
+	u8 severity;			/* Error Severity */
+	u8 validation_bits;		/* 0: platform_guid, 1: !timestamp */
+	u32 len;			/* Length of this error log in bytes */
+	sal_log_timestamp_t timestamp;	/* Timestamp */
+	efi_guid_t platform_guid;	/* Unique OEM Platform ID */
+} sal_log_record_header_t;
+
+#define sal_log_severity_recoverable	0
+#define sal_log_severity_fatal		1
+#define sal_log_severity_corrected	2
+
+/* Definition of log section header structures */
+typedef struct sal_log_sec_header {
+    efi_guid_t guid;			/* Unique Section ID */
+    sal_log_revision_t revision;	/* Major and Minor revision of Section */
+    u16 reserved;
+    u32 len;				/* Section length */
+} sal_log_section_hdr_t;
+
+typedef struct sal_log_mod_error_info {
+	struct {
+		u64 check_info              : 1,
+		    requestor_identifier    : 1,
+		    responder_identifier    : 1,
+		    target_identifier       : 1,
+		    precise_ip              : 1,
+		    reserved                : 59;
+	} valid;
+	u64 check_info;
+	u64 requestor_identifier;
+	u64 responder_identifier;
+	u64 target_identifier;
+	u64 precise_ip;
+} sal_log_mod_error_info_t;
+
+typedef struct sal_processor_static_info {
+	struct {
+		u64 minstate        : 1,
+		    br              : 1,
+		    cr              : 1,
+		    ar              : 1,
+		    rr              : 1,
+		    fr              : 1,
+		    reserved        : 58;
+	} valid;
+	pal_min_state_area_t min_state_area;
+	u64 br[8];
+	u64 cr[128];
+	u64 ar[128];
+	u64 rr[8];
+	struct ia64_fpreg __attribute__ ((packed)) fr[128];
+} sal_processor_static_info_t;
+
+struct sal_cpuid_info {
+	u64 regs[5];
+	u64 reserved;
+};
+
+typedef struct sal_log_processor_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 proc_error_map      : 1,
+		    proc_state_param    : 1,
+		    proc_cr_lid         : 1,
+		    psi_static_struct   : 1,
+		    num_cache_check     : 4,
+		    num_tlb_check       : 4,
+		    num_bus_check       : 4,
+		    num_reg_file_check  : 4,
+		    num_ms_check        : 4,
+		    cpuid_info          : 1,
+		    reserved1           : 39;
+	} valid;
+	u64 proc_error_map;
+	u64 proc_state_parameter;
+	u64 proc_cr_lid;
+	/*
+	 * The rest of this structure consists of variable-length arrays, which can't be
+	 * expressed in C.
+	 */
+	sal_log_mod_error_info_t info[0];
+	/*
+	 * This is what the rest looked like if C supported variable-length arrays:
+	 *
+	 * sal_log_mod_error_info_t cache_check_info[.valid.num_cache_check];
+	 * sal_log_mod_error_info_t tlb_check_info[.valid.num_tlb_check];
+	 * sal_log_mod_error_info_t bus_check_info[.valid.num_bus_check];
+	 * sal_log_mod_error_info_t reg_file_check_info[.valid.num_reg_file_check];
+	 * sal_log_mod_error_info_t ms_check_info[.valid.num_ms_check];
+	 * struct sal_cpuid_info cpuid_info;
+	 * sal_processor_static_info_t processor_static_info;
+	 */
+} sal_log_processor_info_t;
+
+/* Given a sal_log_processor_info_t pointer, return a pointer to the processor_static_info: */
+#define SAL_LPI_PSI_INFO(l)									\
+({	sal_log_processor_info_t *_l = (l);							\
+	((sal_processor_static_info_t *)							\
+	 ((char *) _l->info + ((_l->valid.num_cache_check + _l->valid.num_tlb_check		\
+				+ _l->valid.num_bus_check + _l->valid.num_reg_file_check	\
+				+ _l->valid.num_ms_check) * sizeof(sal_log_mod_error_info_t)	\
+			       + sizeof(struct sal_cpuid_info))));				\
+})
+
+/* platform error log structures */
+
+typedef struct sal_log_mem_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 error_status    : 1,
+		    physical_addr   : 1,
+		    addr_mask       : 1,
+		    node            : 1,
+		    card            : 1,
+		    module          : 1,
+		    bank            : 1,
+		    device          : 1,
+		    row             : 1,
+		    column          : 1,
+		    bit_position    : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_id          : 1,
+		    oem_data        : 1,
+		    reserved        : 47;
+	} valid;
+	u64 error_status;
+	u64 physical_addr;
+	u64 addr_mask;
+	u16 node;
+	u16 card;
+	u16 module;
+	u16 bank;
+	u16 device;
+	u16 row;
+	u16 column;
+	u16 bit_position;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_id[16];
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_mem_dev_err_info_t;
+
+typedef struct sal_log_sel_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 record_id       : 1,
+		    record_type     : 1,
+		    generator_id    : 1,
+		    evm_rev         : 1,
+		    sensor_type     : 1,
+		    sensor_num      : 1,
+		    event_dir       : 1,
+		    event_data1     : 1,
+		    event_data2     : 1,
+		    event_data3     : 1,
+		    reserved        : 54;
+	} valid;
+	u16 record_id;
+	u8 record_type;
+	u8 timestamp[4];
+	u16 generator_id;
+	u8 evm_rev;
+	u8 sensor_type;
+	u8 sensor_num;
+	u8 event_dir;
+	u8 event_data1;
+	u8 event_data2;
+	u8 event_data3;
+} sal_log_sel_dev_err_info_t;
+
+typedef struct sal_log_pci_bus_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    err_type        : 1,
+		    bus_id          : 1,
+		    bus_address     : 1,
+		    bus_data        : 1,
+		    bus_cmd         : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    oem_data        : 1,
+		    reserved        : 54;
+	} valid;
+	u64 err_status;
+	u16 err_type;
+	u16 bus_id;
+	u32 reserved;
+	u64 bus_address;
+	u64 bus_data;
+	u64 bus_cmd;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_pci_bus_err_info_t;
+
+typedef struct sal_log_smbios_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 event_type      : 1,
+		    length          : 1,
+		    time_stamp      : 1,
+		    data            : 1,
+		    reserved1       : 60;
+	} valid;
+	u8 event_type;
+	u8 length;
+	u8 time_stamp[6];
+	u8 data[1];			/* data of variable length, length == slsmb_length */
+} sal_log_smbios_dev_err_info_t;
+
+typedef struct sal_log_pci_comp_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    comp_info       : 1,
+		    num_mem_regs    : 1,
+		    num_io_regs     : 1,
+		    reg_data_pairs  : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	struct {
+		u16 vendor_id;
+		u16 device_id;
+		u8 class_code[3];
+		u8 func_num;
+		u8 dev_num;
+		u8 bus_num;
+		u8 seg_num;
+		u8 reserved[5];
+	} comp_info;
+	u32 num_mem_regs;
+	u32 num_io_regs;
+	u64 reg_data_pairs[1];
+	/*
+	 * array of address/data register pairs is num_mem_regs + num_io_regs elements
+	 * long.  Each array element consists of a u64 address followed by a u64 data
+	 * value.  The oem_data array immediately follows the reg_data_pairs array
+	 */
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_pci_comp_err_info_t;
+
+typedef struct sal_log_plat_specific_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    guid            : 1,
+		    oem_data        : 1,
+		    reserved        : 61;
+	} valid;
+	u64 err_status;
+	efi_guid_t guid;
+	u8 oem_data[1];			/* platform specific variable length data */
+} sal_log_plat_specific_err_info_t;
+
+typedef struct sal_log_host_ctlr_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_data[1];			/* Variable length OEM data */
+} sal_log_host_ctlr_err_info_t;
+
+typedef struct sal_log_plat_bus_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_data[1];			/* Variable length OEM data */
+} sal_log_plat_bus_err_info_t;
+
+/* Overall platform error section structure */
+typedef union sal_log_platform_err_info {
+	sal_log_mem_dev_err_info_t mem_dev_err;
+	sal_log_sel_dev_err_info_t sel_dev_err;
+	sal_log_pci_bus_err_info_t pci_bus_err;
+	sal_log_smbios_dev_err_info_t smbios_dev_err;
+	sal_log_pci_comp_err_info_t pci_comp_err;
+	sal_log_plat_specific_err_info_t plat_specific_err;
+	sal_log_host_ctlr_err_info_t host_ctlr_err;
+	sal_log_plat_bus_err_info_t plat_bus_err;
+} sal_log_platform_err_info_t;
+
+/* SAL log over-all, multi-section error record structure (processor+platform) */
+typedef struct err_rec {
+	sal_log_record_header_t sal_elog_header;
+	sal_log_processor_info_t proc_err;
+	sal_log_platform_err_info_t plat_err;
+	u8 oem_data_pad[1024];
+} ia64_err_rec_t;
+
+/*
+ * Now define a couple of inline functions for improved type checking
+ * and convenience.
+ */
+
+extern s64 ia64_sal_cache_flush (u64 cache_type);
+extern void __init check_sal_cache_flush (void);
+
+/* Initialize all the processor and platform level instruction and data caches */
+static inline s64
+ia64_sal_cache_init (void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_CACHE_INIT, 0, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Clear the processor and platform information logged by SAL with respect to the machine
+ * state at the time of MCA's, INITs, CMCs, or CPEs.
+ */
+static inline s64
+ia64_sal_clear_state_info (u64 sal_info_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, 0,
+	              0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+
+/* Get the processor and platform information logged by SAL with respect to the machine
+ * state at the time of the MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info (u64 sal_info_type, u64 *sal_info)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO, sal_info_type, 0,
+	              sal_info, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+
+	return isrv.v0;
+}
+
+/*
+ * Get the maximum size of the information logged by SAL with respect to the machine state
+ * at the time of MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info_size (u64 sal_info_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, 0,
+	              0, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+	return isrv.v0;
+}
+
+/*
+ * Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup from
+ * the monarch processor.  Must not lock, because it will not return on any cpu until the
+ * monarch processor sends a wake up.
+ */
+static inline s64
+ia64_sal_mc_rendez (void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_NOLOCK(isrv, SAL_MC_RENDEZ, 0, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during
+ * the machine check rendezvous sequence as well as the mechanism to wake up the
+ * non-monarch processor at the end of machine check processing.
+ * Returns the complete ia64_sal_retval because some calls return more than just a status
+ * value.
+ */
+static inline struct ia64_sal_retval
+ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout, u64 rz_always)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val,
+		 timeout, rz_always, 0, 0);
+	return isrv;
+}
+
+/* Read from PCI configuration space */
+static inline s64
+ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0);
+	if (value)
+		*value = isrv.v0;
+	return isrv.status;
+}
+
+/* Write to PCI configuration space */
+static inline s64
+ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value,
+	         type, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Register physical addresses of locations needed by SAL when SAL procedures are invoked
+ * in virtual mode.
+ */
+static inline s64
+ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr,
+	         0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Register software dependent code locations within SAL. These locations are handlers or
+ * entry points where SAL will pass control for the specified event. These event handlers
+ * are for the bott rendezvous, MCAs and INIT scenarios.
+ */
+static inline s64
+ia64_sal_set_vectors (u64 vector_type,
+		      u64 handler_addr1, u64 gp1, u64 handler_len1,
+		      u64 handler_addr2, u64 gp2, u64 handler_len2)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_SET_VECTORS, vector_type,
+			handler_addr1, gp1, handler_len1,
+			handler_addr2, gp2, handler_len2);
+
+	return isrv.status;
+}
+
+/* Update the contents of PAL block in the non-volatile storage device */
+static inline s64
+ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size,
+		     u64 *error_code, u64 *scratch_buf_size_needed)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size,
+	         0, 0, 0, 0);
+	if (error_code)
+		*error_code = isrv.v0;
+	if (scratch_buf_size_needed)
+		*scratch_buf_size_needed = isrv.v1;
+	return isrv.status;
+}
+
+/* Get physical processor die mapping in the platform. */
+static inline s64
+ia64_sal_physical_id_info(u16 *splid)
+{
+	struct ia64_sal_retval isrv;
+
+	if (sal_revision < SAL_VERSION_CODE(3,2))
+		return -1;
+
+	SAL_CALL(isrv, SAL_PHYSICAL_ID_INFO, 0, 0, 0, 0, 0, 0, 0);
+	if (splid)
+		*splid = isrv.v0;
+	return isrv.status;
+}
+
+extern unsigned long sal_platform_features;
+
+extern int (*salinfo_platform_oemdata)(const u8 *, u8 **, u64 *);
+
+struct sal_ret_values {
+	long r8; long r9; long r10; long r11;
+};
+
+#define IA64_SAL_OEMFUNC_MIN		0x02000000
+#define IA64_SAL_OEMFUNC_MAX		0x03ffffff
+
+extern int ia64_sal_oemcall(struct ia64_sal_retval *, u64, u64, u64, u64, u64,
+			    u64, u64, u64);
+extern int ia64_sal_oemcall_nolock(struct ia64_sal_retval *, u64, u64, u64,
+				   u64, u64, u64, u64, u64);
+extern int ia64_sal_oemcall_reentrant(struct ia64_sal_retval *, u64, u64, u64,
+				      u64, u64, u64, u64, u64);
+extern long
+ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
+		    unsigned long *drift_info);
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * System Abstraction Layer Specification
+ * Section 3.2.5.1: OS_BOOT_RENDEZ to SAL return State.
+ * Note: region regs are stored first in head.S _start. Hence they must
+ * stay up front.
+ */
+struct sal_to_os_boot {
+	u64 rr[8];		/* Region Registers */
+	u64 br[6];		/* br0:
+				 * return addr into SAL boot rendez routine */
+	u64 gr1;		/* SAL:GP */
+	u64 gr12;		/* SAL:SP */
+	u64 gr13;		/* SAL: Task Pointer */
+	u64 fpsr;
+	u64 pfs;
+	u64 rnat;
+	u64 unat;
+	u64 bspstore;
+	u64 dcr;		/* Default Control Register */
+	u64 iva;
+	u64 pta;
+	u64 itv;
+	u64 pmv;
+	u64 cmcv;
+	u64 lrr[2];
+	u64 gr[4];
+	u64 pr;			/* Predicate registers */
+	u64 lc;			/* Loop Count */
+	struct ia64_fpreg fp[20];
+};
+
+/*
+ * Global array allocated for NR_CPUS at boot time
+ */
+extern struct sal_to_os_boot sal_boot_rendez_state[NR_CPUS];
+
+extern void ia64_jump_to_sal(struct sal_to_os_boot *);
+#endif
+
+extern void ia64_sal_handler_init(void *entry_point, void *gpval);
+
+#define PALO_MAX_TLB_PURGES	0xFFFF
+#define PALO_SIG	"PALO"
+
+struct palo_table {
+	u8  signature[4];	/* Should be "PALO" */
+	u32 length;
+	u8  minor_revision;
+	u8  major_revision;
+	u8  checksum;
+	u8  reserved1[5];
+	u16 max_tlb_purges;
+	u8  reserved2[6];
+};
+
+#define NPTCG_FROM_PAL			0
+#define NPTCG_FROM_PALO			1
+#define NPTCG_FROM_KERNEL_PARAMETER	2
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SAL_H */
diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h
new file mode 100644
index 00000000000..d6f57874041
--- /dev/null
+++ b/arch/ia64/include/asm/scatterlist.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_SCATTERLIST_H
+#define _ASM_IA64_SCATTERLIST_H
+
+/*
+ * Modified 1998-1999, 2001-2002, 2004
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+	unsigned int length;	/* buffer length */
+
+	dma_addr_t dma_address;
+	unsigned int dma_length;
+};
+
+/*
+ * It used to be that ISA_DMA_THRESHOLD had something to do with the
+ * DMA-limits of ISA-devices.  Nowadays, its only remaining use (apart
+ * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
+ * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
+ * address of a page is that is allocated with GFP_DMA.  On IA-64,
+ * that's 4GB - 1.
+ */
+#define ISA_DMA_THRESHOLD	0xffffffff
+
+#define sg_dma_len(sg)		((sg)->dma_length)
+#define sg_dma_address(sg)	((sg)->dma_address)
+
+#define	ARCH_HAS_SG_CHAIN
+
+#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h
new file mode 100644
index 00000000000..f6679989103
--- /dev/null
+++ b/arch/ia64/include/asm/sections.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_IA64_SECTIONS_H
+#define _ASM_IA64_SECTIONS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/elf.h>
+#include <linux/uaccess.h>
+#include <asm-generic/sections.h>
+
+extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___rse_patchlist[], __end___rse_patchlist[];
+extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
+extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[];
+extern char __start_gate_section[];
+extern char __start_gate_mckinley_e9_patchlist[], __end_gate_mckinley_e9_patchlist[];
+extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[];
+extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[];
+extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[];
+extern char __start_unwind[], __end_unwind[];
+extern char __start_ivt_text[], __end_ivt_text[];
+
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+	struct fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->ip, p))
+		ptr = p;
+	return ptr;
+}
+
+
+#endif /* _ASM_IA64_SECTIONS_H */
+
diff --git a/arch/ia64/include/asm/segment.h b/arch/ia64/include/asm/segment.h
new file mode 100644
index 00000000000..b89e2b3d648
--- /dev/null
+++ b/arch/ia64/include/asm/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_IA64_SEGMENT_H
+#define _ASM_IA64_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_IA64_SEGMENT_H */
diff --git a/arch/ia64/include/asm/sembuf.h b/arch/ia64/include/asm/sembuf.h
new file mode 100644
index 00000000000..1340fbc04d3
--- /dev/null
+++ b/arch/ia64/include/asm/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_SEMBUF_H
+#define _ASM_IA64_SEMBUF_H
+
+/*
+ * The semid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IA64_SEMBUF_H */
diff --git a/arch/ia64/include/asm/serial.h b/arch/ia64/include/asm/serial.h
new file mode 100644
index 00000000000..068be11583d
--- /dev/null
+++ b/arch/ia64/include/asm/serial.h
@@ -0,0 +1,17 @@
+/*
+ * Derived from the i386 version.
+ */
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/*
+ * All legacy serial ports should be enumerated via ACPI namespace, so
+ * we need not list them here.
+ */
diff --git a/arch/ia64/include/asm/setup.h b/arch/ia64/include/asm/setup.h
new file mode 100644
index 00000000000..4399a44355b
--- /dev/null
+++ b/arch/ia64/include/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef __IA64_SETUP_H
+#define __IA64_SETUP_H
+
+#define COMMAND_LINE_SIZE	2048
+
+#endif
diff --git a/arch/ia64/include/asm/shmbuf.h b/arch/ia64/include/asm/shmbuf.h
new file mode 100644
index 00000000000..585002a77ac
--- /dev/null
+++ b/arch/ia64/include/asm/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_SHMBUF_H
+#define _ASM_IA64_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_IA64_SHMBUF_H */
diff --git a/arch/ia64/include/asm/shmparam.h b/arch/ia64/include/asm/shmparam.h
new file mode 100644
index 00000000000..d07508dc54a
--- /dev/null
+++ b/arch/ia64/include/asm/shmparam.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_SHMPARAM_H
+#define _ASM_IA64_SHMPARAM_H
+
+/*
+ * SHMLBA controls minimum alignment at which shared memory segments
+ * get attached.  The IA-64 architecture says that there may be a
+ * performance degradation when there are virtual aliases within 1MB.
+ * To reduce the chance of this, we set SHMLBA to 1MB. --davidm 00/12/20
+ */
+#define	SHMLBA	(1024*1024)
+
+#endif /* _ASM_IA64_SHMPARAM_H */
diff --git a/arch/ia64/include/asm/sigcontext.h b/arch/ia64/include/asm/sigcontext.h
new file mode 100644
index 00000000000..57ff777bcc4
--- /dev/null
+++ b/arch/ia64/include/asm/sigcontext.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_IA64_SIGCONTEXT_H
+#define _ASM_IA64_SIGCONTEXT_H
+
+/*
+ * Copyright (C) 1998, 1999, 2001 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999, 2001 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/fpu.h>
+
+#define IA64_SC_FLAG_ONSTACK_BIT		0	/* is handler running on signal stack? */
+#define IA64_SC_FLAG_IN_SYSCALL_BIT		1	/* did signal interrupt a syscall? */
+#define IA64_SC_FLAG_FPH_VALID_BIT		2	/* is state in f[32]-f[127] valid? */
+
+#define IA64_SC_FLAG_ONSTACK		(1 << IA64_SC_FLAG_ONSTACK_BIT)
+#define IA64_SC_FLAG_IN_SYSCALL		(1 << IA64_SC_FLAG_IN_SYSCALL_BIT)
+#define IA64_SC_FLAG_FPH_VALID		(1 << IA64_SC_FLAG_FPH_VALID_BIT)
+
+# ifndef __ASSEMBLY__
+
+/*
+ * Note on handling of register backing store: sc_ar_bsp contains the address that would
+ * be found in ar.bsp after executing a "cover" instruction the context in which the
+ * signal was raised.  If signal delivery required switching to an alternate signal stack
+ * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the
+ * imaginary "cover" instruction) is backed by the *alternate* signal stack, not the
+ * original one.  In this case, sc_rbs_base contains the base address of the new register
+ * backing store.  The number of registers in the dirty partition can be calculated as:
+ *
+ *   ndirty = ia64_rse_num_regs(sc_rbs_base, sc_rbs_base + (sc_loadrs >> 16))
+ *
+ */
+
+struct sigcontext {
+	unsigned long		sc_flags;	/* see manifest constants above */
+	unsigned long		sc_nat;		/* bit i == 1 iff scratch reg gr[i] is a NaT */
+	stack_t			sc_stack;	/* previously active stack */
+
+	unsigned long		sc_ip;		/* instruction pointer */
+	unsigned long		sc_cfm;		/* current frame marker */
+	unsigned long		sc_um;		/* user mask bits */
+	unsigned long		sc_ar_rsc;	/* register stack configuration register */
+	unsigned long		sc_ar_bsp;	/* backing store pointer */
+	unsigned long		sc_ar_rnat;	/* RSE NaT collection register */
+	unsigned long		sc_ar_ccv;	/* compare and exchange compare value register */
+	unsigned long		sc_ar_unat;	/* ar.unat of interrupted context */
+	unsigned long		sc_ar_fpsr;	/* floating-point status register */
+	unsigned long		sc_ar_pfs;	/* previous function state */
+	unsigned long		sc_ar_lc;	/* loop count register */
+	unsigned long		sc_pr;		/* predicate registers */
+	unsigned long		sc_br[8];	/* branch registers */
+	/* Note: sc_gr[0] is used as the "uc_link" member of ucontext_t */
+	unsigned long		sc_gr[32];	/* general registers (static partition) */
+	struct ia64_fpreg	sc_fr[128];	/* floating-point registers */
+
+	unsigned long		sc_rbs_base;	/* NULL or new base of sighandler's rbs */
+	unsigned long		sc_loadrs;	/* see description above */
+
+	unsigned long		sc_ar25;	/* cmp8xchg16 uses this */
+	unsigned long		sc_ar26;	/* rsvd for scratch use */
+	unsigned long		sc_rsvd[12];	/* reserved for future use */
+	/*
+	 * The mask must come last so we can increase _NSIG_WORDS
+	 * without breaking binary compatibility.
+	 */
+	sigset_t		sc_mask;	/* signal mask to restore after handler returns */
+};
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGCONTEXT_H */
diff --git a/arch/ia64/include/asm/siginfo.h b/arch/ia64/include/asm/siginfo.h
new file mode 100644
index 00000000000..9294e4b0c8b
--- /dev/null
+++ b/arch/ia64/include/asm/siginfo.h
@@ -0,0 +1,139 @@
+#ifndef _ASM_IA64_SIGINFO_H
+#define _ASM_IA64_SIGINFO_H
+
+/*
+ * Based on <asm-i386/siginfo.h>.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+	int __pad0;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* must overlay ._rt._sigval! */
+			int _sys_private;	/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			uid_t _uid;		/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr;	/* faulting insn/memory ref. */
+			int _imm;		/* immediate value for "break" */
+			unsigned int _flags;	/* see below */
+			unsigned long _isr;	/* isr */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			long _band;	/* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+#define si_imm		_sifields._sigfault._imm	/* as per UNIX SysV ABI spec */
+#define si_flags	_sifields._sigfault._flags
+/*
+ * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that
+ * si_code is non-zero and __ISR_VALID is set in si_flags.
+ */
+#define si_isr		_sifields._sigfault._isr
+
+/*
+ * Flag values for si_flags:
+ */
+#define __ISR_VALID_BIT	0
+#define __ISR_VALID	(1 << __ISR_VALID_BIT)
+
+/*
+ * SIGILL si_codes
+ */
+#define ILL_BADIADDR	(__SI_FAULT|9)	/* unimplemented instruction address */
+#define __ILL_BREAK	(__SI_FAULT|10)	/* illegal break */
+#define __ILL_BNDMOD	(__SI_FAULT|11)	/* bundle-update (modification) in progress */
+#undef NSIGILL
+#define NSIGILL		11
+
+/*
+ * SIGFPE si_codes
+ */
+#define __FPE_DECOVF	(__SI_FAULT|9)	/* decimal overflow */
+#define __FPE_DECDIV	(__SI_FAULT|10)	/* decimal division by zero */
+#define __FPE_DECERR	(__SI_FAULT|11)	/* packed decimal error */
+#define __FPE_INVASC	(__SI_FAULT|12)	/* invalid ASCII digit */
+#define __FPE_INVDEC	(__SI_FAULT|13)	/* invalid decimal digit */
+#undef NSIGFPE
+#define NSIGFPE		13
+
+/*
+ * SIGSEGV si_codes
+ */
+#define __SEGV_PSTKOVF	(__SI_FAULT|3)	/* paragraph stack overflow */
+#undef NSIGSEGV
+#define NSIGSEGV	3
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
+#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+
+static inline void
+copy_siginfo (siginfo_t *to, siginfo_t *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(siginfo_t));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SIGINFO_H */
diff --git a/arch/ia64/include/asm/signal.h b/arch/ia64/include/asm/signal.h
new file mode 100644
index 00000000000..4f5ca5643cb
--- /dev/null
+++ b/arch/ia64/include/asm/signal.h
@@ -0,0 +1,160 @@
+#ifndef _ASM_IA64_SIGNAL_H
+#define _ASM_IA64_SIGNAL_H
+
+/*
+ * Modified 1998-2001, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * Unfortunately, this file is being included by bits/signal.h in
+ * glibc-2.x.  Hence the #ifdef __KERNEL__ ugliness.
+ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+/*
+ * The minimum stack size needs to be fairly large because we want to
+ * be sure that an app compiled for today's CPUs will continue to run
+ * on all future CPU models.  The CPU model matters because the signal
+ * frame needs to have space for the complete machine state, including
+ * all physical stacked registers.  The number of physical stacked
+ * registers is CPU model dependent, but given that the width of
+ * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up
+ * more than 16KB of space.
+ */
+#if 1
+  /*
+   * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it
+   * in wrong. ;-(  To preserve backwards compatibility, we leave the kernel at the
+   * incorrect value and fix libc only.
+   */
+# define MINSIGSTKSZ	131027	/* min. stack size for sigaltstack() */
+#else
+# define MINSIGSTKSZ	131072	/* min. stack size for sigaltstack() */
+#endif
+#define SIGSTKSZ	262144	/* default stack size for sigaltstack() */
+
+#ifdef __KERNEL__
+
+#define _NSIG		64
+#define _NSIG_BPW	64
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/signal.h>
+
+# ifndef __ASSEMBLY__
+
+#  include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+typedef unsigned long old_sigset_t;
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#  include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGNAL_H */
diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h
new file mode 100644
index 00000000000..12d96e0cd51
--- /dev/null
+++ b/arch/ia64/include/asm/smp.h
@@ -0,0 +1,138 @@
+/*
+ * SMP Support
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * (c) Copyright 2001-2003, 2005 Hewlett-Packard Development Company, L.P.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ */
+#ifndef _ASM_IA64_SMP_H
+#define _ASM_IA64_SMP_H
+
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+#include <linux/irqreturn.h>
+
+#include <asm/io.h>
+#include <asm/param.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+static inline unsigned int
+ia64_get_lid (void)
+{
+	union {
+		struct {
+			unsigned long reserved : 16;
+			unsigned long eid : 8;
+			unsigned long id : 8;
+			unsigned long ignored : 32;
+		} f;
+		unsigned long bits;
+	} lid;
+
+	lid.bits = ia64_getreg(_IA64_REG_CR_LID);
+	return lid.f.id << 8 | lid.f.eid;
+}
+
+#define hard_smp_processor_id()		ia64_get_lid()
+
+#ifdef CONFIG_SMP
+
+#define XTP_OFFSET		0x1e0008
+
+#define SMP_IRQ_REDIRECTION	(1 << 0)
+#define SMP_IPI_REDIRECTION	(1 << 1)
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+extern struct smp_boot_data {
+	int cpu_count;
+	int cpu_phys_id[NR_CPUS];
+} smp_boot_data __initdata;
+
+extern char no_int_routing __devinitdata;
+
+extern cpumask_t cpu_online_map;
+extern cpumask_t cpu_core_map[NR_CPUS];
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+extern int smp_num_siblings;
+extern void __iomem *ipi_base_addr;
+extern unsigned char smp_int_redirect;
+
+extern volatile int ia64_cpu_to_sapicid[];
+#define cpu_physical_id(i)	ia64_cpu_to_sapicid[i]
+
+extern unsigned long ap_wakeup_vector;
+
+/*
+ * Function to map hard smp processor id to logical id.  Slow, so don't use this in
+ * performance-critical code.
+ */
+static inline int
+cpu_logical_id (int cpuid)
+{
+	int i;
+
+	for (i = 0; i < NR_CPUS; ++i)
+		if (cpu_physical_id(i) == cpuid)
+			break;
+	return i;
+}
+
+/*
+ * XTP control functions:
+ *	min_xtp   : route all interrupts to this CPU
+ *	normal_xtp: nominal XTP value
+ *	max_xtp   : never deliver interrupts to this CPU.
+ */
+
+static inline void
+min_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x00, ipi_base_addr + XTP_OFFSET); /* XTP to min */
+}
+
+static inline void
+normal_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x08, ipi_base_addr + XTP_OFFSET); /* XTP normal */
+}
+
+static inline void
+max_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x0f, ipi_base_addr + XTP_OFFSET); /* Set XTP to max */
+}
+
+/* Upping and downing of CPUs */
+extern int __cpu_disable (void);
+extern void __cpu_die (unsigned int cpu);
+extern void cpu_die (void) __attribute__ ((noreturn));
+extern void __init smp_build_cpu_map(void);
+
+extern void __init init_smp_config (void);
+extern void smp_do_timer (struct pt_regs *regs);
+
+extern irqreturn_t handle_IPI(int irq, void *dev_id);
+extern void smp_send_reschedule (int cpu);
+extern void identify_siblings (struct cpuinfo_ia64 *);
+extern int is_multithreading_enabled(void);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#else /* CONFIG_SMP */
+
+#define cpu_logical_id(i)		0
+#define cpu_physical_id(i)		ia64_get_lid()
+
+#endif /* CONFIG_SMP */
+#endif /* _ASM_IA64_SMP_H */
diff --git a/arch/ia64/include/asm/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h
new file mode 100644
index 00000000000..9ce2801cbd5
--- /dev/null
+++ b/arch/ia64/include/asm/sn/acpi.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_ACPI_H
+#define _ASM_IA64_SN_ACPI_H
+
+#include "acpi/acglobal.h"
+
+extern int sn_acpi_rev;
+#define SN_ACPI_BASE_SUPPORT()   (sn_acpi_rev >= 0x20101)
+
+#endif /* _ASM_IA64_SN_ACPI_H */
diff --git a/arch/ia64/include/asm/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h
new file mode 100644
index 00000000000..e715c794b18
--- /dev/null
+++ b/arch/ia64/include/asm/sn/addrs.h
@@ -0,0 +1,299 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_ADDRS_H
+#define _ASM_IA64_SN_ADDRS_H
+
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/pda.h>
+
+/*
+ *  Memory/SHUB Address Format:
+ *  +-+---------+--+--------------+
+ *  |0|  NASID  |AS| NodeOffset   |
+ *  +-+---------+--+--------------+
+ *
+ *  NASID: (low NASID bit is 0) Memory and SHUB MMRs
+ *   AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
+ *     00: Local Resources and MMR space
+ *           Top bit of NodeOffset
+ *               0: Local resources space
+ *                  node id:
+ *                        0: IA64/NT compatibility space
+ *                        2: Local MMR Space
+ *                        4: Local memory, regardless of local node id
+ *               1: Global MMR space
+ *     01: GET space.
+ *     10: AMO space.
+ *     11: Cacheable memory space.
+ *
+ *   NodeOffset: byte offset
+ *
+ *
+ *  TIO address format:
+ *  +-+----------+--+--------------+
+ *  |0|  NASID   |AS| Nodeoffset   |
+ *  +-+----------+--+--------------+
+ *
+ *  NASID: (low NASID bit is 1) TIO
+ *   AS: 2-bit Chiplet Identifier
+ *     00: TIO LB (Indicates TIO MMR access.)
+ *     01: TIO ICE (indicates coretalk space access.)
+ * 
+ *   NodeOffset: top bit must be set.
+ *
+ *
+ * Note that in both of the above address formats, the low
+ * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
+ */
+
+
+/*
+ * Define basic shift & mask constants for manipulating NASIDs and AS values.
+ */
+#define NASID_BITMASK		(sn_hub_info->nasid_bitmask)
+#define NASID_SHIFT		(sn_hub_info->nasid_shift)
+#define AS_SHIFT		(sn_hub_info->as_shift)
+#define AS_BITMASK		0x3UL
+
+#define NASID_MASK              ((u64)NASID_BITMASK << NASID_SHIFT)
+#define AS_MASK			((u64)AS_BITMASK << AS_SHIFT)
+
+
+/*
+ * AS values. These are the same on both SHUB1 & SHUB2.
+ */
+#define AS_GET_VAL		1UL
+#define AS_AMO_VAL		2UL
+#define AS_CAC_VAL		3UL
+#define AS_GET_SPACE		(AS_GET_VAL << AS_SHIFT)
+#define AS_AMO_SPACE		(AS_AMO_VAL << AS_SHIFT)
+#define AS_CAC_SPACE		(AS_CAC_VAL << AS_SHIFT)
+
+
+/* 
+ * Virtual Mode Local & Global MMR space.  
+ */
+#define SH1_LOCAL_MMR_OFFSET	0x8000000000UL
+#define SH2_LOCAL_MMR_OFFSET	0x0200000000UL
+#define LOCAL_MMR_OFFSET	(is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
+#define LOCAL_MMR_SPACE		(__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET)
+#define LOCAL_PHYS_MMR_SPACE	(RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET)
+
+#define SH1_GLOBAL_MMR_OFFSET	0x0800000000UL
+#define SH2_GLOBAL_MMR_OFFSET	0x0300000000UL
+#define GLOBAL_MMR_OFFSET	(is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
+#define GLOBAL_MMR_SPACE	(__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET)
+
+/*
+ * Physical mode addresses
+ */
+#define GLOBAL_PHYS_MMR_SPACE	(RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET)
+
+
+/*
+ * Clear region & AS bits.
+ */
+#define TO_PHYS_MASK		(~(RGN_BITS | AS_MASK))
+
+
+/*
+ * Misc NASID manipulation.
+ */
+#define NASID_SPACE(n)		((u64)(n) << NASID_SHIFT)
+#define REMOTE_ADDR(n,a)	(NASID_SPACE(n) | (a))
+#define NODE_OFFSET(x)		((x) & (NODE_ADDRSPACE_SIZE - 1))
+#define NODE_ADDRSPACE_SIZE     (1UL << AS_SHIFT)
+#define NASID_GET(x)		(int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
+#define LOCAL_MMR_ADDR(a)	(LOCAL_MMR_SPACE | (a))
+#define GLOBAL_MMR_ADDR(n,a)	(GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_CAC_ADDR(n,a)	(CAC_BASE | REMOTE_ADDR(n,a))
+#define CHANGE_NASID(n,x)	((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
+#define IS_TIO_NASID(n)		((n) & 1)
+
+
+/* non-II mmr's start at top of big window space (4G) */
+#define BWIN_TOP		0x0000000100000000UL
+
+/*
+ * general address defines
+ */
+#define CAC_BASE		(PAGE_OFFSET | AS_CAC_SPACE)
+#define AMO_BASE		(__IA64_UNCACHED_OFFSET | AS_AMO_SPACE)
+#define AMO_PHYS_BASE		(RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE)
+#define GET_BASE		(PAGE_OFFSET | AS_GET_SPACE)
+
+/*
+ * Convert Memory addresses between various addressing modes.
+ */
+#define TO_PHYS(x)		(TO_PHYS_MASK & (x))
+#define TO_CAC(x)		(CAC_BASE     | TO_PHYS(x))
+#ifdef CONFIG_SGI_SN
+#define TO_AMO(x)		(AMO_BASE     | TO_PHYS(x))
+#define TO_GET(x)		(GET_BASE     | TO_PHYS(x))
+#else
+#define TO_AMO(x)		({ BUG(); x; })
+#define TO_GET(x)		({ BUG(); x; })
+#endif
+
+/*
+ * Covert from processor physical address to II/TIO physical address:
+ *	II - squeeze out the AS bits
+ *	TIO- requires a chiplet id in bits 38-39.  For DMA to memory,
+ *           the chiplet id is zero.  If we implement TIO-TIO dma, we might need
+ *           to insert a chiplet id into this macro.  However, it is our belief
+ *           right now that this chiplet id will be ICE, which is also zero.
+ */
+#define SH1_TIO_PHYS_TO_DMA(x) 						\
+	((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x))
+
+#define SH2_NETWORK_BANK_OFFSET(x) 					\
+        ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1))
+
+#define SH2_NETWORK_BANK_SELECT(x) 					\
+        ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4)))	\
+        	>> (sn_hub_info->nasid_shift - 4)) << 36)
+
+#define SH2_NETWORK_ADDRESS(x) 						\
+	(SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x))
+
+#define SH2_TIO_PHYS_TO_DMA(x) 						\
+        (((u64)(NASID_GET(x)) << 40) | 	SH2_NETWORK_ADDRESS(x))
+
+#define PHYS_TO_TIODMA(x)						\
+	(is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x))
+
+#define PHYS_TO_DMA(x)							\
+	((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
+
+
+/*
+ * Macros to test for address type.
+ */
+#define IS_AMO_ADDRESS(x)	(((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE)
+#define IS_AMO_PHYS_ADDRESS(x)	(((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE)
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+#define BWIN_SIZE_BITS			29	/* big window size: 512M */
+#define TIO_BWIN_SIZE_BITS		30	/* big window size: 1G */
+#define NODE_SWIN_BASE(n, w)		((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
+		: RAW_NODE_SWIN_BASE(n, w))
+#define TIO_SWIN_BASE(n, w) 		(TIO_IO_BASE(n) + \
+					    ((u64) (w) << TIO_SWIN_SIZE_BITS))
+#define NODE_IO_BASE(n)			(GLOBAL_MMR_SPACE | NASID_SPACE(n))
+#define TIO_IO_BASE(n)                  (__IA64_UNCACHED_OFFSET | NASID_SPACE(n))
+#define BWIN_SIZE			(1UL << BWIN_SIZE_BITS)
+#define NODE_BWIN_BASE0(n)		(NODE_IO_BASE(n) + BWIN_SIZE)
+#define NODE_BWIN_BASE(n, w)		(NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
+#define RAW_NODE_SWIN_BASE(n, w)	(NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
+#define BWIN_WIDGET_MASK		0x7
+#define BWIN_WINDOWNUM(x)		(((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+#define SH1_IS_BIG_WINDOW_ADDR(x)	((x) & BWIN_TOP)
+
+#define TIO_BWIN_WINDOW_SELECT_MASK	0x7
+#define TIO_BWIN_WINDOWNUM(x)		(((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
+
+#define TIO_HWIN_SHIFT_BITS		33
+#define TIO_HWIN(x)			(NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS)
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS			24
+#define	SWIN_WIDGET_MASK		0xF
+
+#define TIO_SWIN_SIZE_BITS		28
+#define TIO_SWIN_SIZE			(1UL << TIO_SWIN_SIZE_BITS)
+#define TIO_SWIN_WIDGET_MASK		0x3
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define	SWIN_WIDGETNUM(x)		(((x)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+#define TIO_SWIN_WIDGETNUM(x)		(((x)  >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers. The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers.  The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for x.
+ *
+ *   WARNING:
+ *	When certain Hub chip workaround are defined, it's not sufficient
+ *	to dereference the *_HUB_ADDR() macros.  You should instead use
+ *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ *	They're always safe.
+ */
+/* Shub1 TIO & MMR addressing macros */
+#define SH1_TIO_IOSPACE_ADDR(n,x)					\
+	GLOBAL_MMR_ADDR(n,x)
+
+#define SH1_REMOTE_BWIN_MMR(n,x)					\
+	GLOBAL_MMR_ADDR(n,x)
+
+#define SH1_REMOTE_SWIN_MMR(n,x)					\
+	(NODE_SWIN_BASE(n,1) + 0x800000UL + (x))
+
+#define SH1_REMOTE_MMR(n,x)						\
+	(SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) :		\
+	 	SH1_REMOTE_SWIN_MMR(n,x))
+
+/* Shub1 TIO & MMR addressing macros */
+#define SH2_TIO_IOSPACE_ADDR(n,x)					\
+	((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2)))
+
+#define SH2_REMOTE_MMR(n,x)						\
+	GLOBAL_MMR_ADDR(n,x)
+
+
+/* TIO & MMR addressing macros that work on both shub1 & shub2 */
+#define TIO_IOSPACE_ADDR(n,x)						\
+	((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) :		\
+		 SH2_TIO_IOSPACE_ADDR(n,x)))
+
+#define SH_REMOTE_MMR(n,x)						\
+	(is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x))
+
+#define REMOTE_HUB_ADDR(n,x)						\
+	(IS_TIO_NASID(n) ?  ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) :	\
+	 ((volatile u64*)SH_REMOTE_MMR(n,x)))
+
+
+#define HUB_L(x)			(*((volatile typeof(*x) *)x))
+#define	HUB_S(x,d)			(*((volatile typeof(*x) *)x) = (d))
+
+#define REMOTE_HUB_L(n, a)		HUB_L(REMOTE_HUB_ADDR((n), (a)))
+#define REMOTE_HUB_S(n, a, d)		HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
+
+/*
+ * Coretalk address breakdown
+ */
+#define CTALK_NASID_SHFT		40
+#define CTALK_NASID_MASK		(0x3FFFULL << CTALK_NASID_SHFT)
+#define CTALK_CID_SHFT			38
+#define CTALK_CID_MASK			(0x3ULL << CTALK_CID_SHFT)
+#define CTALK_NODE_OFFSET		0x3FFFFFFFFF
+
+#endif /* _ASM_IA64_SN_ADDRS_H */
diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h
new file mode 100644
index 00000000000..7caa1f44cd9
--- /dev/null
+++ b/arch/ia64/include/asm/sn/arch.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_IA64_SN_ARCH_H
+#define _ASM_IA64_SN_ARCH_H
+
+#include <linux/numa.h>
+#include <asm/types.h>
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/sn_cpuid.h>
+
+/*
+ * This is the maximum number of NUMALINK nodes that can be part of a single
+ * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
+ * remote partitions are NOT included in this number.
+ * The number of compact nodes cannot exceed size of a coherency domain.
+ * The purpose of this define is to specify a node count that includes
+ * all C/M/TIO nodes in an SSI system.
+ *
+ * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
+ *
+ * 	Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
+ * 	to ACPI3.0, this limit will be removed. The notion of "compact nodes"
+ * 	should be deleted and TIOs should be included in MAX_NUMNODES.
+ */
+#define MAX_TIO_NODES		MAX_NUMNODES
+#define MAX_COMPACT_NODES	(MAX_NUMNODES + MAX_TIO_NODES)
+
+/*
+ * Maximum number of nodes in all partitions and in all coherency domains.
+ * This is the total number of nodes accessible in the numalink fabric. It
+ * includes all C & M bricks, plus all TIOs.
+ *
+ * This value is also the value of the maximum number of NASIDs in the numalink
+ * fabric.
+ */
+#define MAX_NUMALINK_NODES	16384
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced. They are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct sn_hub_info_s {
+	u8 shub2;
+	u8 nasid_shift;
+	u8 as_shift;
+	u8 shub_1_1_found;
+	u16 nasid_bitmask;
+};
+DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
+#define sn_hub_info 	(&__get_cpu_var(__sn_hub_info))
+#define is_shub2()	(sn_hub_info->shub2)
+#define is_shub1()	(sn_hub_info->shub2 == 0)
+
+/*
+ * Use this macro to test if shub 1.1 wars should be enabled
+ */
+#define enable_shub_wars_1_1()	(sn_hub_info->shub_1_1_found)
+
+
+/*
+ * Compact node ID to nasid mappings kept in the per-cpu data areas of each
+ * cpu.
+ */
+DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
+#define sn_cnodeid_to_nasid	(&__get_cpu_var(__sn_cnodeid_to_nasid[0]))
+
+
+extern u8 sn_partition_id;
+extern u8 sn_system_size;
+extern u8 sn_sharing_domain_size;
+extern u8 sn_region_size;
+
+extern void sn_flush_all_caches(long addr, long bytes);
+extern bool sn_cpu_disable_allowed(int cpu);
+
+#endif /* _ASM_IA64_SN_ARCH_H */
diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h
new file mode 100644
index 00000000000..5efecf06c9a
--- /dev/null
+++ b/arch/ia64/include/asm/sn/bte.h
@@ -0,0 +1,234 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_BTE_H
+#define _ASM_IA64_SN_BTE_H
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/types.h>
+#include <asm/sn/shub_mmr.h>
+
+#define IBCT_NOTIFY             (0x1UL << 4)
+#define IBCT_ZFIL_MODE          (0x1UL << 0)
+
+/* #define BTE_DEBUG */
+/* #define BTE_DEBUG_VERBOSE */
+
+#ifdef BTE_DEBUG
+#  define BTE_PRINTK(x) printk x	/* Terse */
+#  ifdef BTE_DEBUG_VERBOSE
+#    define BTE_PRINTKV(x) printk x	/* Verbose */
+#  else
+#    define BTE_PRINTKV(x)
+#  endif /* BTE_DEBUG_VERBOSE */
+#else
+#  define BTE_PRINTK(x)
+#  define BTE_PRINTKV(x)
+#endif	/* BTE_DEBUG */
+
+
+/* BTE status register only supports 16 bits for length field */
+#define BTE_LEN_BITS (16)
+#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
+#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+
+
+/* Define hardware */
+#define BTES_PER_NODE (is_shub2() ? 4 : 2)
+#define MAX_BTES_PER_NODE 4
+
+#define BTE2OFF_CTRL	0
+#define BTE2OFF_SRC	(SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
+#define BTE2OFF_DEST	(SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
+#define BTE2OFF_NOTIFY	(SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)
+
+#define BTE_BASE_ADDR(interface) 				\
+    (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 :		\
+		  (interface == 1) ? SH2_BT_ENG_CSR_1 :		\
+		  (interface == 2) ? SH2_BT_ENG_CSR_2 :		\
+		  		     SH2_BT_ENG_CSR_3 		\
+		: (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)
+
+#define BTE_SOURCE_ADDR(base)					\
+    (is_shub2() ? base + (BTE2OFF_SRC/8) 			\
+		: base + (BTEOFF_SRC/8))
+
+#define BTE_DEST_ADDR(base)					\
+    (is_shub2() ? base + (BTE2OFF_DEST/8) 			\
+		: base + (BTEOFF_DEST/8))
+
+#define BTE_CTRL_ADDR(base)					\
+    (is_shub2() ? base + (BTE2OFF_CTRL/8) 			\
+		: base + (BTEOFF_CTRL/8))
+
+#define BTE_NOTIF_ADDR(base)					\
+    (is_shub2() ? base + (BTE2OFF_NOTIFY/8) 			\
+		: base + (BTEOFF_NOTIFY/8))
+
+/* Define hardware modes */
+#define BTE_NOTIFY IBCT_NOTIFY
+#define BTE_NORMAL BTE_NOTIFY
+#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
+/* Use a reserved bit to let the caller specify a wait for any BTE */
+#define BTE_WACQUIRE 0x4000
+/* Use the BTE on the node with the destination memory */
+#define BTE_USE_DEST (BTE_WACQUIRE << 1)
+/* Use any available BTE interface on any node for the transfer */
+#define BTE_USE_ANY (BTE_USE_DEST << 1)
+/* macro to force the IBCT0 value valid */
+#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
+
+#define BTE_ACTIVE		(IBLS_BUSY | IBLS_ERROR)
+#define BTE_WORD_AVAILABLE	(IBLS_BUSY << 1)
+#define BTE_WORD_BUSY		(~BTE_WORD_AVAILABLE)
+
+/*
+ * Some macros to simplify reading.
+ * Start with macros to locate the BTE control registers.
+ */
+#define BTE_LNSTAT_LOAD(_bte)						\
+			HUB_L(_bte->bte_base_addr)
+#define BTE_LNSTAT_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr, (_x))
+#define BTE_SRC_STORE(_bte, _x)						\
+({									\
+		u64 __addr = ((_x) & ~AS_MASK);				\
+		if (is_shub2()) 					\
+			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
+		HUB_S(_bte->bte_source_addr, __addr);			\
+})
+#define BTE_DEST_STORE(_bte, _x)					\
+({									\
+		u64 __addr = ((_x) & ~AS_MASK);				\
+		if (is_shub2()) 					\
+			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
+		HUB_S(_bte->bte_destination_addr, __addr);		\
+})
+#define BTE_CTRL_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_control_addr, (_x))
+#define BTE_NOTIF_STORE(_bte, _x)					\
+({									\
+		u64 __addr = ia64_tpa((_x) & ~AS_MASK);			\
+		if (is_shub2()) 					\
+			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
+		HUB_S(_bte->bte_notify_addr, __addr);			\
+})
+
+#define BTE_START_TRANSFER(_bte, _len, _mode)				\
+	is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
+		: BTE_LNSTAT_STORE(_bte, _len);				\
+		  BTE_CTRL_STORE(_bte, _mode)
+
+/* Possible results from bte_copy and bte_unaligned_copy */
+/* The following error codes map into the BTE hardware codes
+ * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
+ * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
+ * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
+ * codes to give the following error codes.
+ */
+#define BTEFAIL_OFFSET	1
+
+typedef enum {
+	BTE_SUCCESS,		/* 0 is success */
+	BTEFAIL_DIR,		/* Directory error due to IIO access*/
+	BTEFAIL_POISON,		/* poison error on IO access (write to poison page) */
+	BTEFAIL_WERR,		/* Write error (ie WINV to a Read only line) */
+	BTEFAIL_ACCESS,		/* access error (protection violation) */
+	BTEFAIL_PWERR,		/* Partial Write Error */
+	BTEFAIL_PRERR,		/* Partial Read Error */
+	BTEFAIL_TOUT,		/* CRB Time out */
+	BTEFAIL_XTERR,		/* Incoming xtalk pkt had error bit */
+	BTEFAIL_NOTAVAIL,	/* BTE not available */
+} bte_result_t;
+
+#define BTEFAIL_SH2_RESP_SHORT	0x1	/* bit 000001 */
+#define BTEFAIL_SH2_RESP_LONG	0x2	/* bit 000010 */
+#define BTEFAIL_SH2_RESP_DSP	0x4	/* bit 000100 */
+#define BTEFAIL_SH2_RESP_ACCESS	0x8	/* bit 001000 */
+#define BTEFAIL_SH2_CRB_TO	0x10	/* bit 010000 */
+#define BTEFAIL_SH2_NACK_LIMIT	0x20	/* bit 100000 */
+#define BTEFAIL_SH2_ALL		0x3F	/* bit 111111 */
+
+#define	BTE_ERR_BITS	0x3FUL
+#define	BTE_ERR_SHIFT	36
+#define BTE_ERR_MASK	(BTE_ERR_BITS << BTE_ERR_SHIFT)
+
+#define BTE_ERROR_RETRY(value)						\
+	(is_shub2() ? (value != BTEFAIL_SH2_CRB_TO)			\
+		: (value != BTEFAIL_TOUT))
+
+/*
+ * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2()
+ */
+#define BTE_SHUB2_ERROR(_status)					\
+	((_status & BTE_ERR_MASK) 					\
+	   ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \
+	   : _status)
+
+#define BTE_GET_ERROR_STATUS(_status)					\
+	(BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR)
+
+#define BTE_VALID_SH2_ERROR(value)					\
+	((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL))
+
+/*
+ * Structure defining a bte.  An instance of this
+ * structure is created in the nodepda for each
+ * bte on that node (as defined by BTES_PER_NODE)
+ * This structure contains everything necessary
+ * to work with a BTE.
+ */
+struct bteinfo_s {
+	volatile u64 notify ____cacheline_aligned;
+	u64 *bte_base_addr ____cacheline_aligned;
+	u64 *bte_source_addr;
+	u64 *bte_destination_addr;
+	u64 *bte_control_addr;
+	u64 *bte_notify_addr;
+	spinlock_t spinlock;
+	cnodeid_t bte_cnode;	/* cnode                            */
+	int bte_error_count;	/* Number of errors encountered     */
+	int bte_num;		/* 0 --> BTE0, 1 --> BTE1           */
+	int cleanup_active;	/* Interface is locked for cleanup  */
+	volatile bte_result_t bh_error;	/* error while processing   */
+	volatile u64 *most_rcnt_na;
+	struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
+};
+
+
+/*
+ * Function prototypes (functions defined in bte.c, used elsewhere)
+ */
+extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
+extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
+extern void bte_error_handler(unsigned long);
+
+#define bte_zero(dest, len, mode, notification) \
+	bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
+
+/*
+ * The following is the prefered way of calling bte_unaligned_copy
+ * If the copy is fully cache line aligned, then bte_copy is
+ * used instead.  Since bte_copy is inlined, this saves a call
+ * stack.  NOTE: bte_copy is called synchronously and does block
+ * until the transfer is complete.  In order to get the asynch
+ * version of bte_copy, you must perform this check yourself.
+ */
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)			\
+	(((len & (L1_CACHE_BYTES - 1)) ||				\
+	  (src & (L1_CACHE_BYTES - 1)) ||				\
+	  (dest & (L1_CACHE_BYTES - 1))) ?				\
+	 bte_unaligned_copy(src, dest, len, mode) :			\
+	 bte_copy(src, dest, len, mode, NULL))
+
+
+#endif	/* _ASM_IA64_SN_BTE_H */
diff --git a/arch/ia64/include/asm/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h
new file mode 100644
index 00000000000..d340c365a82
--- /dev/null
+++ b/arch/ia64/include/asm/sn/clksupport.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+/*
+ * This file contains definitions for accessing a platform supported high resolution
+ * clock. The clock is monitonically increasing and can be accessed from any node
+ * in the system. The clock is synchronized across nodes - all nodes see the
+ * same value.
+ * 
+ *	RTC_COUNTER_ADDR - contains the address of the counter 
+ *
+ */
+
+#ifndef _ASM_IA64_SN_CLKSUPPORT_H
+#define _ASM_IA64_SN_CLKSUPPORT_H
+
+extern unsigned long sn_rtc_cycles_per_second;
+
+#define RTC_COUNTER_ADDR	((long *)LOCAL_MMR_ADDR(SH_RTC))
+
+#define rtc_time()		(*RTC_COUNTER_ADDR)
+
+#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
diff --git a/arch/ia64/include/asm/sn/geo.h b/arch/ia64/include/asm/sn/geo.h
new file mode 100644
index 00000000000..f083c943406
--- /dev/null
+++ b/arch/ia64/include/asm/sn/geo.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_GEO_H
+#define _ASM_IA64_SN_GEO_H
+
+/* The geoid_t implementation below is based loosely on the pcfg_t
+   implementation in sys/SN/promcfg.h. */
+
+/* Type declaractions */
+
+/* Size of a geoid_t structure (must be before decl. of geoid_u) */
+#define GEOID_SIZE	8	/* Would 16 be better?  The size can
+				   be different on different platforms. */
+
+#define MAX_SLOTS	0xf	/* slots per module */
+#define MAX_SLABS	0xf	/* slabs per slot */
+
+typedef unsigned char	geo_type_t;
+
+/* Fields common to all substructures */
+typedef struct geo_common_s {
+    moduleid_t	module;		/* The module (box) this h/w lives in */
+    geo_type_t	type;		/* What type of h/w is named by this geoid_t */
+    slabid_t	slab:4;		/* slab (ASIC), 0 .. 15 within slot */
+    slotid_t	slot:4;		/* slot (Blade), 0 .. 15 within module */
+} geo_common_t;
+
+/* Additional fields for particular types of hardware */
+typedef struct geo_node_s {
+    geo_common_t	common;		/* No additional fields needed */
+} geo_node_t;
+
+typedef struct geo_rtr_s {
+    geo_common_t	common;		/* No additional fields needed */
+} geo_rtr_t;
+
+typedef struct geo_iocntl_s {
+    geo_common_t	common;		/* No additional fields needed */
+} geo_iocntl_t;
+
+typedef struct geo_pcicard_s {
+    geo_iocntl_t	common;
+    char		bus;	/* Bus/widget number */
+    char		slot;	/* PCI slot number */
+} geo_pcicard_t;
+
+/* Subcomponents of a node */
+typedef struct geo_cpu_s {
+    geo_node_t	node;
+    char	slice;		/* Which CPU on the node */
+} geo_cpu_t;
+
+typedef struct geo_mem_s {
+    geo_node_t	node;
+    char	membus;		/* The memory bus on the node */
+    char	memslot;	/* The memory slot on the bus */
+} geo_mem_t;
+
+
+typedef union geoid_u {
+    geo_common_t	common;
+    geo_node_t		node;
+    geo_iocntl_t	iocntl;
+    geo_pcicard_t	pcicard;
+    geo_rtr_t		rtr;
+    geo_cpu_t		cpu;
+    geo_mem_t		mem;
+    char		padsize[GEOID_SIZE];
+} geoid_t;
+
+
+/* Preprocessor macros */
+
+#define GEO_MAX_LEN	48	/* max. formatted length, plus some pad:
+				   module/001c07/slab/5/node/memory/2/slot/4 */
+
+/* Values for geo_type_t */
+#define GEO_TYPE_INVALID	0
+#define GEO_TYPE_MODULE		1
+#define GEO_TYPE_NODE		2
+#define GEO_TYPE_RTR		3
+#define GEO_TYPE_IOCNTL		4
+#define GEO_TYPE_IOCARD		5
+#define GEO_TYPE_CPU		6
+#define GEO_TYPE_MEM		7
+#define GEO_TYPE_MAX		(GEO_TYPE_MEM+1)
+
+/* Parameter for hwcfg_format_geoid_compt() */
+#define GEO_COMPT_MODULE	1
+#define GEO_COMPT_SLAB		2
+#define GEO_COMPT_IOBUS		3
+#define GEO_COMPT_IOSLOT	4
+#define GEO_COMPT_CPU		5
+#define GEO_COMPT_MEMBUS	6
+#define GEO_COMPT_MEMSLOT	7
+
+#define GEO_INVALID_STR		"<invalid>"
+
+#define INVALID_NASID           ((nasid_t)-1)
+#define INVALID_CNODEID         ((cnodeid_t)-1)
+#define INVALID_PNODEID         ((pnodeid_t)-1)
+#define INVALID_SLAB            (slabid_t)-1
+#define INVALID_SLOT            (slotid_t)-1
+#define INVALID_MODULE          ((moduleid_t)-1)
+
+static inline slabid_t geo_slab(geoid_t g)
+{
+	return (g.common.type == GEO_TYPE_INVALID) ?
+		INVALID_SLAB : g.common.slab;
+}
+
+static inline slotid_t geo_slot(geoid_t g)
+{
+	return (g.common.type == GEO_TYPE_INVALID) ?
+		INVALID_SLOT : g.common.slot;
+}
+
+static inline moduleid_t geo_module(geoid_t g)
+{
+	return (g.common.type == GEO_TYPE_INVALID) ?
+		INVALID_MODULE : g.common.module;
+}
+
+extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
+
+#endif /* _ASM_IA64_SN_GEO_H */
diff --git a/arch/ia64/include/asm/sn/intr.h b/arch/ia64/include/asm/sn/intr.h
new file mode 100644
index 00000000000..e0487aa9741
--- /dev/null
+++ b/arch/ia64/include/asm/sn/intr.h
@@ -0,0 +1,68 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_INTR_H
+#define _ASM_IA64_SN_INTR_H
+
+#include <linux/rcupdate.h>
+#include <asm/sn/types.h>
+
+#define SGI_UART_VECTOR		0xe9
+
+/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
+#define SGI_XPC_ACTIVATE	0x30
+#define SGI_II_ERROR		0x31
+#define SGI_XBOW_ERROR		0x32
+#define SGI_PCIASIC_ERROR	0x33
+#define SGI_ACPI_SCI_INT	0x34
+#define SGI_TIOCA_ERROR		0x35
+#define SGI_TIO_ERROR		0x36
+#define SGI_TIOCX_ERROR		0x37
+#define SGI_MMTIMER_VECTOR	0x38
+#define SGI_XPC_NOTIFY		0xe7
+
+#define IA64_SN2_FIRST_DEVICE_VECTOR	0x3c
+#define IA64_SN2_LAST_DEVICE_VECTOR	0xe6
+
+#define SN2_IRQ_RESERVED	0x1
+#define SN2_IRQ_CONNECTED	0x2
+#define SN2_IRQ_SHARED		0x4
+
+// The SN PROM irq struct
+struct sn_irq_info {
+	struct sn_irq_info *irq_next;	/* deprecated DO NOT USE     */
+	short		irq_nasid;	/* Nasid IRQ is assigned to  */
+	int		irq_slice;	/* slice IRQ is assigned to  */
+	int		irq_cpuid;	/* kernel logical cpuid	     */
+	int		irq_irq;	/* the IRQ number */
+	int		irq_int_bit;	/* Bridge interrupt pin */
+					/* <0 means MSI */
+	u64	irq_xtalkaddr;	/* xtalkaddr IRQ is sent to  */
+	int		irq_bridge_type;/* pciio asic type (pciio.h) */
+	void	       *irq_bridge;	/* bridge generating irq     */
+	void	       *irq_pciioinfo;	/* associated pciio_info_t   */
+	int		irq_last_intr;	/* For Shub lb lost intr WAR */
+	int		irq_cookie;	/* unique cookie 	     */
+	int		irq_flags;	/* flags */
+	int		irq_share_cnt;	/* num devices sharing IRQ   */
+	struct list_head	list;	/* list of sn_irq_info structs */
+	struct rcu_head		rcu;	/* rcu callback list */
+};
+
+extern void sn_send_IPI_phys(int, long, int, int);
+extern u64 sn_intr_alloc(nasid_t, int,
+			      struct sn_irq_info *,
+			      int, nasid_t, int);
+extern void sn_intr_free(nasid_t, int, struct sn_irq_info *);
+extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int);
+extern void sn_set_err_irq_affinity(unsigned int);
+extern struct list_head **sn_irq_lh;
+
+#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
+
+#endif /* _ASM_IA64_SN_INTR_H */
diff --git a/arch/ia64/include/asm/sn/io.h b/arch/ia64/include/asm/sn/io.h
new file mode 100644
index 00000000000..41c73a73562
--- /dev/null
+++ b/arch/ia64/include/asm/sn/io.h
@@ -0,0 +1,274 @@
+/* 
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+
+extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
+extern void __sn_mmiowb(void); /* Forward definition */
+
+extern int num_cnodes;
+
+#define __sn_mf_a()   ia64_mfa()
+
+extern void sn_dma_flush(unsigned long);
+
+#define __sn_inb ___sn_inb
+#define __sn_inw ___sn_inw
+#define __sn_inl ___sn_inl
+#define __sn_outb ___sn_outb
+#define __sn_outw ___sn_outw
+#define __sn_outl ___sn_outl
+#define __sn_readb ___sn_readb
+#define __sn_readw ___sn_readw
+#define __sn_readl ___sn_readl
+#define __sn_readq ___sn_readq
+#define __sn_readb_relaxed ___sn_readb_relaxed
+#define __sn_readw_relaxed ___sn_readw_relaxed
+#define __sn_readl_relaxed ___sn_readl_relaxed
+#define __sn_readq_relaxed ___sn_readq_relaxed
+
+/*
+ * Convenience macros for setting/clearing bits using the above accessors
+ */
+
+#define __sn_setq_relaxed(addr, val) \
+	writeq((__sn_readq_relaxed(addr) | (val)), (addr))
+#define __sn_clrq_relaxed(addr, val) \
+	writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
+
+/*
+ * The following routines are SN Platform specific, called when
+ * a reference is made to inX/outX set macros.  SN Platform
+ * inX set of macros ensures that Posted DMA writes on the
+ * Bridge is flushed.
+ *
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned int
+___sn_inb (unsigned long port)
+{
+	volatile unsigned char *addr;
+	unsigned char ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline unsigned int
+___sn_inw (unsigned long port)
+{
+	volatile unsigned short *addr;
+	unsigned short ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline unsigned int
+___sn_inl (unsigned long port)
+{
+	volatile unsigned int *addr;
+	unsigned int ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline void
+___sn_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+static inline void
+___sn_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+static inline void
+___sn_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+/*
+ * The following routines are SN Platform specific, called when 
+ * a reference is made to readX/writeX set macros.  SN Platform 
+ * readX set of macros ensures that Posted DMA writes on the 
+ * Bridge is flushed.
+ * 
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned char
+___sn_readb (const volatile void __iomem *addr)
+{
+	unsigned char val;
+
+	val = *(volatile unsigned char __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned short
+___sn_readw (const volatile void __iomem *addr)
+{
+	unsigned short val;
+
+	val = *(volatile unsigned short __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned int
+___sn_readl (const volatile void __iomem *addr)
+{
+	unsigned int val;
+
+	val = *(volatile unsigned int __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned long
+___sn_readq (const volatile void __iomem *addr)
+{
+	unsigned long val;
+
+	val = *(volatile unsigned long __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+/*
+ * For generic and SN2 kernels, we have a set of fast access
+ * PIO macros.	These macros are provided on SN Platform
+ * because the normal inX and readX macros perform an
+ * additional task of flushing Post DMA request on the Bridge.
+ *
+ * These routines should be self explainatory.
+ */
+
+static inline unsigned int
+sn_inb_fast (unsigned long port)
+{
+	volatile unsigned char *addr = (unsigned char *)port;
+	unsigned char ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+sn_inw_fast (unsigned long port)
+{
+	volatile unsigned short *addr = (unsigned short *)port;
+	unsigned short ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+sn_inl_fast (unsigned long port)
+{
+	volatile unsigned int *addr = (unsigned int *)port;
+	unsigned int ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned char
+___sn_readb_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___sn_readw_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___sn_readl_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___sn_readq_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+struct pci_dev;
+
+static inline int
+sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
+{
+
+	if (vchan > 1) {
+		return -1;
+	}
+
+	if (!(*addr >> 32))	/* Using a mask here would be cleaner */
+		return 0;	/* but this generates better code */
+
+	if (vchan == 1) {
+		/* Set Bit 57 */
+		*addr |= (1UL << 57);
+	} else {
+		/* Clear Bit 57 */
+		*addr &= ~(1UL << 57);
+	}
+
+	return 0;
+}
+
+#endif	/* _ASM_SN_IO_H */
diff --git a/arch/ia64/include/asm/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h
new file mode 100644
index 00000000000..95ed6cc83cf
--- /dev/null
+++ b/arch/ia64/include/asm/sn/ioc3.h
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2005 Silicon Graphics, Inc.
+ */
+#ifndef IA64_SN_IOC3_H
+#define IA64_SN_IOC3_H
+
+/* serial port register map */
+struct ioc3_serialregs {
+	uint32_t sscr;
+	uint32_t stpir;
+	uint32_t stcir;
+	uint32_t srpir;
+	uint32_t srcir;
+	uint32_t srtr;
+	uint32_t shadow;
+};
+
+/* SUPERIO uart register map */
+struct ioc3_uartregs {
+	char iu_lcr;
+	union {
+		char iir;	/* read only */
+		char fcr;	/* write only */
+	} u3;
+	union {
+		char ier;	/* DLAB == 0 */
+		char dlm;	/* DLAB == 1 */
+	} u2;
+	union {
+		char rbr;	/* read only, DLAB == 0 */
+		char thr;	/* write only, DLAB == 0 */
+		char dll;	/* DLAB == 1 */
+	} u1;
+	char iu_scr;
+	char iu_msr;
+	char iu_lsr;
+	char iu_mcr;
+};
+
+#define iu_rbr u1.rbr
+#define iu_thr u1.thr
+#define iu_dll u1.dll
+#define iu_ier u2.ier
+#define iu_dlm u2.dlm
+#define iu_iir u3.iir
+#define iu_fcr u3.fcr
+
+struct ioc3_sioregs {
+	char fill[0x170];
+	struct ioc3_uartregs uartb;
+	struct ioc3_uartregs uarta;
+};
+
+/* PCI IO/mem space register map */
+struct ioc3 {
+	uint32_t pci_id;
+	uint32_t pci_scr;
+	uint32_t pci_rev;
+	uint32_t pci_lat;
+	uint32_t pci_addr;
+	uint32_t pci_err_addr_l;
+	uint32_t pci_err_addr_h;
+
+	uint32_t sio_ir;
+	/* these registers are read-only for general kernel code. To
+	 * modify them use the functions in ioc3.c
+	 */
+	uint32_t sio_ies;
+	uint32_t sio_iec;
+	uint32_t sio_cr;
+	uint32_t int_out;
+	uint32_t mcr;
+	uint32_t gpcr_s;
+	uint32_t gpcr_c;
+	uint32_t gpdr;
+	uint32_t gppr[9];
+	char fill[0x4c];
+
+	/* serial port registers */
+	uint32_t sbbr_h;
+	uint32_t sbbr_l;
+
+	struct ioc3_serialregs port_a;
+	struct ioc3_serialregs port_b;
+	char fill1[0x1ff10];
+	/* superio registers */
+	struct ioc3_sioregs sregs;
+};
+
+/* These don't exist on the ioc3 serial card... */
+#define eier	fill1[8]
+#define eisr	fill1[4]
+
+#define PCI_LAT			0xc	/* Latency Timer */
+#define PCI_SCR_DROP_MODE_EN	0x00008000 /* drop pios on parity err */
+#define UARTA_BASE		0x178
+#define UARTB_BASE		0x170
+
+
+/* bitmasks for serial RX status byte */
+#define RXSB_OVERRUN		0x01	/* char(s) lost */
+#define RXSB_PAR_ERR		0x02	/* parity error */
+#define RXSB_FRAME_ERR		0x04	/* framing error */
+#define RXSB_BREAK		0x08	/* break character */
+#define RXSB_CTS		0x10	/* state of CTS */
+#define RXSB_DCD		0x20	/* state of DCD */
+#define RXSB_MODEM_VALID	0x40	/* DCD, CTS and OVERRUN are valid */
+#define RXSB_DATA_VALID		0x80	/* FRAME_ERR PAR_ERR & BREAK valid */
+
+/* bitmasks for serial TX control byte */
+#define TXCB_INT_WHEN_DONE	0x20	/* interrupt after this byte is sent */
+#define TXCB_INVALID		0x00	/* byte is invalid */
+#define TXCB_VALID		0x40	/* byte is valid */
+#define TXCB_MCR		0x80	/* data<7:0> to modem cntrl register */
+#define TXCB_DELAY		0xc0	/* delay data<7:0> mSec */
+
+/* bitmasks for SBBR_L */
+#define SBBR_L_SIZE		0x00000001	/* 0 1KB rings, 1 4KB rings */
+
+/* bitmasks for SSCR_<A:B> */
+#define SSCR_RX_THRESHOLD	0x000001ff	/* hiwater mark */
+#define SSCR_TX_TIMER_BUSY	0x00010000	/* TX timer in progress */
+#define SSCR_HFC_EN		0x00020000	/* h/w flow cntrl enabled */
+#define SSCR_RX_RING_DCD	0x00040000	/* postRX record on delta-DCD */
+#define SSCR_RX_RING_CTS	0x00080000	/* postRX record on delta-CTS */
+#define SSCR_HIGH_SPD		0x00100000	/* 4X speed */
+#define SSCR_DIAG		0x00200000	/* bypass clock divider */
+#define SSCR_RX_DRAIN		0x08000000	/* drain RX buffer to memory */
+#define SSCR_DMA_EN		0x10000000	/* enable ring buffer DMA */
+#define SSCR_DMA_PAUSE		0x20000000	/* pause DMA */
+#define SSCR_PAUSE_STATE	0x40000000	/* set when PAUSE takes effect*/
+#define SSCR_RESET		0x80000000	/* reset DMA channels */
+
+/* all producer/comsumer pointers are the same bitfield */
+#define PROD_CONS_PTR_4K	0x00000ff8	/* for 4K buffers */
+#define PROD_CONS_PTR_1K	0x000003f8	/* for 1K buffers */
+#define PROD_CONS_PTR_OFF	3
+
+/* bitmasks for SRCIR_<A:B> */
+#define SRCIR_ARM		0x80000000	/* arm RX timer */
+
+/* bitmasks for SHADOW_<A:B> */
+#define SHADOW_DR		0x00000001	/* data ready */
+#define SHADOW_OE		0x00000002	/* overrun error */
+#define SHADOW_PE		0x00000004	/* parity error */
+#define SHADOW_FE		0x00000008	/* framing error */
+#define SHADOW_BI		0x00000010	/* break interrupt */
+#define SHADOW_THRE		0x00000020	/* transmit holding reg empty */
+#define SHADOW_TEMT		0x00000040	/* transmit shift reg empty */
+#define SHADOW_RFCE		0x00000080	/* char in RX fifo has error */
+#define SHADOW_DCTS		0x00010000	/* delta clear to send */
+#define SHADOW_DDCD		0x00080000	/* delta data carrier detect */
+#define SHADOW_CTS		0x00100000	/* clear to send */
+#define SHADOW_DCD		0x00800000	/* data carrier detect */
+#define SHADOW_DTR		0x01000000	/* data terminal ready */
+#define SHADOW_RTS		0x02000000	/* request to send */
+#define SHADOW_OUT1		0x04000000	/* 16550 OUT1 bit */
+#define SHADOW_OUT2		0x08000000	/* 16550 OUT2 bit */
+#define SHADOW_LOOP		0x10000000	/* loopback enabled */
+
+/* bitmasks for SRTR_<A:B> */
+#define SRTR_CNT		0x00000fff	/* reload value for RX timer */
+#define SRTR_CNT_VAL		0x0fff0000	/* current value of RX timer */
+#define SRTR_CNT_VAL_SHIFT	16
+#define SRTR_HZ			16000		/* SRTR clock frequency */
+
+/* bitmasks for SIO_IR, SIO_IEC and SIO_IES  */
+#define SIO_IR_SA_TX_MT		0x00000001	/* Serial port A TX empty */
+#define SIO_IR_SA_RX_FULL	0x00000002	/* port A RX buf full */
+#define SIO_IR_SA_RX_HIGH	0x00000004	/* port A RX hiwat */
+#define SIO_IR_SA_RX_TIMER	0x00000008	/* port A RX timeout */
+#define SIO_IR_SA_DELTA_DCD	0x00000010	/* port A delta DCD */
+#define SIO_IR_SA_DELTA_CTS	0x00000020	/* port A delta CTS */
+#define SIO_IR_SA_INT		0x00000040	/* port A pass-thru intr */
+#define SIO_IR_SA_TX_EXPLICIT	0x00000080	/* port A explicit TX thru */
+#define SIO_IR_SA_MEMERR	0x00000100	/* port A PCI error */
+#define SIO_IR_SB_TX_MT		0x00000200
+#define SIO_IR_SB_RX_FULL	0x00000400
+#define SIO_IR_SB_RX_HIGH	0x00000800
+#define SIO_IR_SB_RX_TIMER	0x00001000
+#define SIO_IR_SB_DELTA_DCD	0x00002000
+#define SIO_IR_SB_DELTA_CTS	0x00004000
+#define SIO_IR_SB_INT		0x00008000
+#define SIO_IR_SB_TX_EXPLICIT	0x00010000
+#define SIO_IR_SB_MEMERR	0x00020000
+#define SIO_IR_PP_INT		0x00040000	/* P port pass-thru intr */
+#define SIO_IR_PP_INTA		0x00080000	/* PP context A thru */
+#define SIO_IR_PP_INTB		0x00100000	/* PP context B thru */
+#define SIO_IR_PP_MEMERR	0x00200000	/* PP PCI error */
+#define SIO_IR_KBD_INT		0x00400000	/* kbd/mouse intr */
+#define SIO_IR_RT_INT		0x08000000	/* RT output pulse */
+#define SIO_IR_GEN_INT1		0x10000000	/* RT input pulse */
+#define SIO_IR_GEN_INT_SHIFT	28
+
+/* per device interrupt masks */
+#define SIO_IR_SA		(SIO_IR_SA_TX_MT | \
+				 SIO_IR_SA_RX_FULL | \
+				 SIO_IR_SA_RX_HIGH | \
+				 SIO_IR_SA_RX_TIMER | \
+				 SIO_IR_SA_DELTA_DCD | \
+				 SIO_IR_SA_DELTA_CTS | \
+				 SIO_IR_SA_INT | \
+				 SIO_IR_SA_TX_EXPLICIT | \
+				 SIO_IR_SA_MEMERR)
+
+#define SIO_IR_SB		(SIO_IR_SB_TX_MT | \
+				 SIO_IR_SB_RX_FULL | \
+				 SIO_IR_SB_RX_HIGH | \
+				 SIO_IR_SB_RX_TIMER | \
+				 SIO_IR_SB_DELTA_DCD | \
+				 SIO_IR_SB_DELTA_CTS | \
+				 SIO_IR_SB_INT | \
+				 SIO_IR_SB_TX_EXPLICIT | \
+				 SIO_IR_SB_MEMERR)
+
+#define SIO_IR_PP		(SIO_IR_PP_INT | SIO_IR_PP_INTA | \
+				 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
+#define SIO_IR_RT		(SIO_IR_RT_INT | SIO_IR_GEN_INT1)
+
+/* bitmasks for SIO_CR */
+#define SIO_CR_CMD_PULSE_SHIFT 15
+#define SIO_CR_SER_A_BASE_SHIFT 1
+#define SIO_CR_SER_B_BASE_SHIFT 8
+#define SIO_CR_ARB_DIAG		0x00380000	/* cur !enet PCI requet (ro) */
+#define SIO_CR_ARB_DIAG_TXA	0x00000000
+#define SIO_CR_ARB_DIAG_RXA	0x00080000
+#define SIO_CR_ARB_DIAG_TXB	0x00100000
+#define SIO_CR_ARB_DIAG_RXB	0x00180000
+#define SIO_CR_ARB_DIAG_PP	0x00200000
+#define SIO_CR_ARB_DIAG_IDLE	0x00400000	/* 0 -> active request (ro) */
+
+/* defs for some of the generic I/O pins */
+#define GPCR_PHY_RESET		0x20	/* pin is output to PHY reset */
+#define GPCR_UARTB_MODESEL	0x40	/* pin is output to port B mode sel */
+#define GPCR_UARTA_MODESEL	0x80	/* pin is output to port A mode sel */
+
+#define GPPR_PHY_RESET_PIN	5	/* GIO pin controlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin cntrling uartb modeselect */
+#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin cntrling uarta modeselect */
+
+#endif /* IA64_SN_IOC3_H */
diff --git a/arch/ia64/include/asm/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h
new file mode 100644
index 00000000000..bcbf209d63b
--- /dev/null
+++ b/arch/ia64/include/asm/sn/klconfig.h
@@ -0,0 +1,246 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_KLCONFIG_H
+#define _ASM_IA64_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+typedef s32 klconf_off_t;
+
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+	char		pad[20];
+	klconf_off_t	ch_board_info;	/* the link list of boards */
+	char		pad0[88];
+} kl_config_hdr_t;
+
+
+#define NODE_OFFSET_TO_LBOARD(nasid,off)        (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to 
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to 
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and 
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the 
+ * First board info on the remote node. The remote node list is 
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ * 
+ KLCONFIG
+
+ +------------+      +------------+      +------------+      +------------+
+ |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
+ +------------+      +------------+      +------------+      +------------+
+
+
+ +------------+
+ | board info |
+ +------------+       +--------------------------------+
+ | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
+ +------------+       +--------------------------------+
+ | compt 2    |--+
+ +------------+  |    +--------------------------------+
+ |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
+ +------------+       +--------------------------------+
+ | errinfo    |--+
+ +------------+  |    +--------------------------------+
+                 +--->|r/l brd errinfo,compt err flags |
+                      +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has 
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error 
+ * information specific to the COMPONENT is present in the respective 
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the 
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is 
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where 
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info 
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes 
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. 
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ * 
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+
+/*
+ * BOARD classes
+ */
+
+#define KLCLASS_MASK	0xf0   
+#define KLCLASS_NONE	0x00
+#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
+#define KLCLASS_CPU	KLCLASS_NODE	
+#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI 
+					    and the non-graphics widget boards */
+#define KLCLASS_ROUTER	0x30             /* Router board */
+#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
+                                            so that we can record error info */
+#define KLCLASS_IOBRICK	0x70		/* IP35 iobrick */
+#define KLCLASS_MAX	8		/* Bump this if a new CLASS is added */
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+
+/*
+ * board types
+ */
+
+#define KLTYPE_MASK	0x0f
+#define KLTYPE(_x)      ((_x) & KLTYPE_MASK)
+
+#define KLTYPE_SNIA	(KLCLASS_CPU | 0x1)
+#define KLTYPE_TIO	(KLCLASS_CPU | 0x2)
+
+#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
+
+#define KLTYPE_IOBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_NBRICK		(KLCLASS_IOBRICK | 0x4)
+#define KLTYPE_PXBRICK		(KLCLASS_IOBRICK | 0x6)
+#define KLTYPE_IXBRICK		(KLCLASS_IOBRICK | 0x7)
+#define KLTYPE_CGBRICK		(KLCLASS_IOBRICK | 0x8)
+#define KLTYPE_OPUSBRICK	(KLCLASS_IOBRICK | 0x9)
+#define KLTYPE_SABRICK          (KLCLASS_IOBRICK | 0xa)
+#define KLTYPE_IABRICK		(KLCLASS_IOBRICK | 0xb)
+#define KLTYPE_PABRICK          (KLCLASS_IOBRICK | 0xc)
+#define KLTYPE_GABRICK		(KLCLASS_IOBRICK | 0xd)
+
+
+/* 
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+typedef struct lboard_s {
+	klconf_off_t 	brd_next_any;     /* Next BOARD */
+	unsigned char 	struct_type;      /* type of structure, local or remote */
+	unsigned char 	brd_type;         /* type+class */
+	unsigned char 	brd_sversion;     /* version of this structure */
+        unsigned char 	brd_brevision;    /* board revision */
+        unsigned char 	brd_promver;      /* board prom version, if any */
+ 	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
+	unsigned char 	brd_slot;         /* slot number */
+	unsigned short	brd_debugsw;      /* Debug switches */
+	geoid_t		brd_geoid;	  /* geo id */
+	partid_t 	brd_partition;    /* Partition number */
+        unsigned short 	brd_diagval;      /* diagnostic value */
+        unsigned short 	brd_diagparm;     /* diagnostic parameter */
+        unsigned char 	brd_inventory;    /* inventory history */
+        unsigned char 	brd_numcompts;    /* Number of components */
+        nic_t         	brd_nic;          /* Number in CAN */
+	nasid_t		brd_nasid;        /* passed parameter */
+	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+	klconf_off_t 	brd_errinfo;      /* Board's error information */
+	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
+	char            pad0[4];
+	unsigned char	brd_confidence;	  /* confidence that the board is bad */
+	nasid_t		brd_owner;        /* who owns this board */
+	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
+	char		pad1[24];	  /* future expansion */
+	char		brd_name[32];
+	nasid_t		brd_next_same_host; /* host of next brd w/same nasid */
+	klconf_off_t	brd_next_same;    /* Next BOARD with same nasid */
+} lboard_t;
+
+/*
+ * Generic info structure. This stores common info about a 
+ * component.
+ */
+ 
+typedef struct klinfo_s {                  /* Generic info */
+        unsigned char   struct_type;       /* type of this structure */
+        unsigned char   struct_version;    /* version of this structure */
+        unsigned char   flags;            /* Enabled, disabled etc */
+        unsigned char   revision;         /* component revision */
+        unsigned short  diagval;          /* result of diagnostics */
+        unsigned short  diagparm;         /* diagnostic parameter */
+        unsigned char   inventory;        /* previous inventory status */
+        unsigned short  partid;		   /* widget part number */
+	nic_t 		nic;              /* MUst be aligned properly */
+        unsigned char   physid;           /* physical id of component */
+        unsigned int    virtid;           /* virtual id as seen by system */
+	unsigned char	widid;	          /* Widget id - if applicable */
+	nasid_t		nasid;            /* node number - from parent */
+	char		pad1;		  /* pad out structure. */
+	char		pad2;		  /* pad out structure. */
+	void		*data;
+        klconf_off_t	errinfo;          /* component specific errors */
+        unsigned short  pad3;             /* pci fields have moved over to */
+        unsigned short  pad4;             /* klbri_t */
+} klinfo_t ;
+
+
+static inline lboard_t *find_lboard_next(lboard_t * brd)
+{
+	if (brd && brd->brd_next_any)
+		return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
+        return NULL;
+}
+
+#endif /* _ASM_IA64_SN_KLCONFIG_H */
diff --git a/arch/ia64/include/asm/sn/l1.h b/arch/ia64/include/asm/sn/l1.h
new file mode 100644
index 00000000000..344bf44bb35
--- /dev/null
+++ b/arch/ia64/include/asm/sn/l1.h
@@ -0,0 +1,51 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#ifndef _ASM_IA64_SN_L1_H
+#define _ASM_IA64_SN_L1_H
+
+/* brick type response codes */
+#define L1_BRICKTYPE_PX         0x23            /* # */
+#define L1_BRICKTYPE_PE         0x25            /* % */
+#define L1_BRICKTYPE_N_p0       0x26            /* & */
+#define L1_BRICKTYPE_IP45       0x34            /* 4 */
+#define L1_BRICKTYPE_IP41       0x35            /* 5 */
+#define L1_BRICKTYPE_TWISTER    0x36            /* 6 */ /* IP53 & ROUTER */
+#define L1_BRICKTYPE_IX         0x3d            /* = */
+#define L1_BRICKTYPE_IP34       0x61            /* a */
+#define L1_BRICKTYPE_GA		0x62            /* b */
+#define L1_BRICKTYPE_C          0x63            /* c */
+#define L1_BRICKTYPE_OPUS_TIO	0x66		/* f */
+#define L1_BRICKTYPE_I          0x69            /* i */
+#define L1_BRICKTYPE_N          0x6e            /* n */
+#define L1_BRICKTYPE_OPUS       0x6f		/* o */
+#define L1_BRICKTYPE_P          0x70            /* p */
+#define L1_BRICKTYPE_R          0x72            /* r */
+#define L1_BRICKTYPE_CHI_CG     0x76            /* v */
+#define L1_BRICKTYPE_X          0x78            /* x */
+#define L1_BRICKTYPE_X2         0x79            /* y */
+#define L1_BRICKTYPE_SA		0x5e            /* ^ */
+#define L1_BRICKTYPE_PA		0x6a            /* j */
+#define L1_BRICKTYPE_IA		0x6b            /* k */
+#define L1_BRICKTYPE_ATHENA	0x2b            /* + */
+#define L1_BRICKTYPE_DAYTONA	0x7a            /* z */
+#define L1_BRICKTYPE_1932	0x2c		/* . */
+#define L1_BRICKTYPE_191010	0x2e		/* , */
+
+/* board type response codes */
+#define L1_BOARDTYPE_IP69       0x0100          /* CA */
+#define L1_BOARDTYPE_IP63       0x0200          /* CB */
+#define L1_BOARDTYPE_BASEIO     0x0300          /* IB */
+#define L1_BOARDTYPE_PCIE2SLOT  0x0400          /* IC */
+#define L1_BOARDTYPE_PCIX3SLOT  0x0500          /* ID */
+#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600       /* IE */
+#define L1_BOARDTYPE_ABACUS     0x0700          /* AB */
+#define L1_BOARDTYPE_DAYTONA    0x0800          /* AD */
+#define L1_BOARDTYPE_INVAL      (-1)            /* invalid brick type */
+
+#endif /* _ASM_IA64_SN_L1_H */
diff --git a/arch/ia64/include/asm/sn/leds.h b/arch/ia64/include/asm/sn/leds.h
new file mode 100644
index 00000000000..66cf8c4d92c
--- /dev/null
+++ b/arch/ia64/include/asm/sn/leds.h
@@ -0,0 +1,33 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_LEDS_H
+#define _ASM_IA64_SN_LEDS_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/shub_mmr.h>
+
+#define LED0		(LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
+#define LED_CPU_SHIFT	16
+
+#define LED_CPU_HEARTBEAT	0x01
+#define LED_CPU_ACTIVITY	0x02
+#define LED_ALWAYS_SET		0x00
+
+/*
+ * Basic macros for flashing the LEDS on an SGI SN.
+ */
+
+static __inline__ void
+set_led_bits(u8 value, u8 mask)
+{
+	pda->led_state = (pda->led_state & ~mask) | (value & mask);
+	*pda->led_address = (short) pda->led_state;
+}
+
+#endif /* _ASM_IA64_SN_LEDS_H */
+
diff --git a/arch/ia64/include/asm/sn/module.h b/arch/ia64/include/asm/sn/module.h
new file mode 100644
index 00000000000..734e980ece2
--- /dev/null
+++ b/arch/ia64/include/asm/sn/module.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_MODULE_H
+#define _ASM_IA64_SN_MODULE_H
+
+/* parameter for format_module_id() */
+#define MODULE_FORMAT_BRIEF	1
+#define MODULE_FORMAT_LONG	2
+#define MODULE_FORMAT_LCD	3
+
+/*
+ *	Module id format
+ *
+ *	31-16	Rack ID (encoded class, group, number - 16-bit unsigned int)
+ *	 15-8	Brick type (8-bit ascii character)
+ *	  7-0	Bay (brick position in rack (0-63) - 8-bit unsigned int)
+ *
+ */
+
+/*
+ * Macros for getting the brick type
+ */
+#define MODULE_BTYPE_MASK	0xff00
+#define MODULE_BTYPE_SHFT	8
+#define MODULE_GET_BTYPE(_m)	(((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
+#define MODULE_BT_TO_CHAR(_b)	((char)(_b))
+#define MODULE_GET_BTCHAR(_m)	(MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
+
+/*
+ * Macros for getting the rack ID.
+ */
+#define MODULE_RACK_MASK	0xffff0000
+#define MODULE_RACK_SHFT	16
+#define MODULE_GET_RACK(_m)	(((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
+
+/*
+ * Macros for getting the brick position
+ */
+#define MODULE_BPOS_MASK	0x00ff
+#define MODULE_BPOS_SHFT	0
+#define MODULE_GET_BPOS(_m)	(((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ *   class (0==CPU/mixed, 1==I/O), group, number
+ *
+ * Rack number is stored just as it is displayed on the screen:
+ * a 3-decimal-digit number.
+ */
+#define RACK_CLASS_DVDR         100
+#define RACK_GROUP_DVDR         10
+#define RACK_NUM_DVDR           1
+
+#define RACK_CREATE_RACKID(_c, _g, _n)  ((_c) * RACK_CLASS_DVDR +       \
+        (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
+
+#define RACK_GET_CLASS(_r)              ((_r) / RACK_CLASS_DVDR)
+#define RACK_GET_GROUP(_r)              (((_r) - RACK_GET_CLASS(_r) *   \
+            RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
+#define RACK_GET_NUM(_r)                (((_r) - RACK_GET_CLASS(_r) *   \
+            RACK_CLASS_DVDR - RACK_GET_GROUP(_r) *      \
+            RACK_GROUP_DVDR) / RACK_NUM_DVDR)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ *   class      1 bit, 0==CPU/mixed, 1==I/O
+ *   group      2 bits for CPU/mixed, 3 bits for I/O
+ *   number     3 bits for CPU/mixed, 2 bits for I/O (1 based)
+ */
+#define RACK_GROUP_BITS(_r)     (RACK_GET_CLASS(_r) ? 3 : 2)
+#define RACK_NUM_BITS(_r)       (RACK_GET_CLASS(_r) ? 2 : 3)
+
+#define RACK_CLASS_MASK(_r)     0x20
+#define RACK_CLASS_SHFT(_r)     5
+#define RACK_ADD_CLASS(_r, _c)  \
+        ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
+
+#define RACK_GROUP_SHFT(_r)     RACK_NUM_BITS(_r)
+#define RACK_GROUP_MASK(_r)     \
+        ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
+#define RACK_ADD_GROUP(_r, _g)  \
+        ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
+
+#define RACK_NUM_SHFT(_r)       0
+#define RACK_NUM_MASK(_r)       \
+        ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
+#define RACK_ADD_NUM(_r, _n)    \
+        ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
+
+
+/*
+ * Brick type definitions
+ */
+#define MAX_BRICK_TYPES         256 /* brick type is stored as uchar */
+
+extern char brick_types[];
+
+#define MODULE_CBRICK           0
+#define MODULE_RBRICK           1
+#define MODULE_IBRICK           2
+#define MODULE_KBRICK           3
+#define MODULE_XBRICK           4
+#define MODULE_DBRICK           5
+#define MODULE_PBRICK           6
+#define MODULE_NBRICK           7
+#define MODULE_PEBRICK          8
+#define MODULE_PXBRICK          9
+#define MODULE_IXBRICK          10
+#define MODULE_CGBRICK		11
+#define MODULE_OPUSBRICK        12
+#define MODULE_SABRICK		13	/* TIO BringUp Brick */
+#define MODULE_IABRICK		14
+#define MODULE_PABRICK		15
+#define MODULE_GABRICK		16
+#define MODULE_OPUS_TIO		17	/* OPUS TIO Riser */
+
+extern char brick_types[];
+extern void format_module_id(char *, moduleid_t, int);
+
+#endif /* _ASM_IA64_SN_MODULE_H */
diff --git a/arch/ia64/include/asm/sn/mspec.h b/arch/ia64/include/asm/sn/mspec.h
new file mode 100644
index 00000000000..c1d3c50c322
--- /dev/null
+++ b/arch/ia64/include/asm/sn/mspec.h
@@ -0,0 +1,59 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_MSPEC_H
+#define _ASM_IA64_SN_MSPEC_H
+
+#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
+
+#define FETCHOP_LOAD		0
+#define FETCHOP_INCREMENT	8
+#define FETCHOP_DECREMENT	16
+#define FETCHOP_CLEAR		24
+
+#define FETCHOP_STORE		0
+#define FETCHOP_AND		24
+#define FETCHOP_OR		32
+
+#define FETCHOP_CLEAR_CACHE	56
+
+#define FETCHOP_LOAD_OP(addr, op) ( \
+         *(volatile long *)((char*) (addr) + (op)))
+
+#define FETCHOP_STORE_OP(addr, op, x) ( \
+         *(volatile long *)((char*) (addr) + (op)) = (long) (x))
+
+#ifdef __KERNEL__
+
+/*
+ * Each Atomic Memory Operation (amo, formerly known as fetchop)
+ * variable is 64 bytes long.  The first 8 bytes are used.  The
+ * remaining 56 bytes are unaddressable due to the operation taking
+ * that portion of the address.
+ *
+ * NOTE: The amo structure _MUST_ be placed in either the first or second
+ * half of the cache line.  The cache line _MUST NOT_ be used for anything
+ * other than additional amo entries.  This is because there are two
+ * addresses which reference the same physical cache line.  One will
+ * be a cached entry with the memory type bits all set.  This address
+ * may be loaded into processor cache.  The amo will be referenced
+ * uncached via the memory special memory type.  If any portion of the
+ * cached cache-line is modified, when that line is flushed, it will
+ * overwrite the uncached value in physical memory and lead to
+ * inconsistency.
+ */
+struct amo {
+        u64 variable;
+        u64 unused[7];
+};
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SN_MSPEC_H */
diff --git a/arch/ia64/include/asm/sn/nodepda.h b/arch/ia64/include/asm/sn/nodepda.h
new file mode 100644
index 00000000000..ee118b901de
--- /dev/null
+++ b/arch/ia64/include/asm/sn/nodepda.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_NODEPDA_H
+#define _ASM_IA64_SN_NODEPDA_H
+
+
+#include <asm/irq.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/intr.h>
+#include <asm/sn/bte.h>
+
+/*
+ * NUMA Node-Specific Data structures are defined in this file.
+ * In particular, this is the location of the node PDA.
+ * A pointer to the right node PDA is saved in each CPU PDA.
+ */
+
+/*
+ * Node-specific data structure.
+ *
+ * One of these structures is allocated on each node of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together 
+ * all per-node data structures. 
+ */
+struct phys_cpuid {
+	short			nasid;
+	char			subnode;
+	char			slice;
+};
+
+struct nodepda_s {
+	void 		*pdinfo;	/* Platform-dependent per-node info */
+
+	/*
+	 * The BTEs on this node are shared by the local cpus
+	 */
+	struct bteinfo_s	bte_if[MAX_BTES_PER_NODE];	/* Virtual Interface */
+	struct timer_list	bte_recovery_timer;
+	spinlock_t		bte_recovery_lock;
+
+	/* 
+	 * Array of pointers to the nodepdas for each node.
+	 */
+	struct nodepda_s	*pernode_pdaindr[MAX_COMPACT_NODES]; 
+
+	/*
+	 * Array of physical cpu identifiers. Indexed by cpuid.
+	 */
+	struct phys_cpuid	phys_cpuid[NR_CPUS];
+	spinlock_t		ptc_lock ____cacheline_aligned_in_smp;
+};
+
+typedef struct nodepda_s nodepda_t;
+
+/*
+ * Access Functions for node PDA.
+ * Since there is one nodepda for each node, we need a convenient mechanism
+ * to access these nodepdas without cluttering code with #ifdefs.
+ * The next set of definitions provides this.
+ * Routines are expected to use 
+ *
+ *	sn_nodepda   - to access node PDA for the node on which code is running
+ *	NODEPDA(cnodeid)   - to access node PDA for cnodeid
+ */
+
+DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda);
+#define sn_nodepda		(__get_cpu_var(__sn_nodepda))
+#define	NODEPDA(cnodeid)	(sn_nodepda->pernode_pdaindr[cnodeid])
+
+/*
+ * Check if given a compact node id the corresponding node has all the
+ * cpus disabled. 
+ */
+#define is_headless_node(cnodeid)	(nr_cpus_node(cnodeid) == 0)
+
+#endif /* _ASM_IA64_SN_NODEPDA_H */
diff --git a/arch/ia64/include/asm/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h
new file mode 100644
index 00000000000..da205b7cdaa
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pcibr_provider.h
@@ -0,0 +1,150 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
+#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
+
+#include <asm/sn/intr.h>
+#include <asm/sn/pcibus_provider_defs.h>
+
+/* Workarounds */
+#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */
+
+#define BUSTYPE_MASK                    0x1
+
+/* Macros given a pcibus structure */
+#define IS_PCIX(ps)     ((ps)->pbi_bridge_mode & BUSTYPE_MASK)
+#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \
+                asic == PCIIO_ASIC_TYPE_TIOCP)
+#define IS_PIC_SOFT(ps)     (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC)
+#define IS_TIOCP_SOFT(ps)   (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP)
+
+
+/*
+ * The different PCI Bridge types supported on the SGI Altix platforms
+ */
+#define PCIBR_BRIDGETYPE_UNKNOWN       -1
+#define PCIBR_BRIDGETYPE_PIC            2
+#define PCIBR_BRIDGETYPE_TIOCP          3
+
+/*
+ * Bridge 64bit Direct Map Attributes
+ */
+#define PCI64_ATTR_PREF                 (1ull << 59)
+#define PCI64_ATTR_PREC                 (1ull << 58)
+#define PCI64_ATTR_VIRTUAL              (1ull << 57)
+#define PCI64_ATTR_BAR                  (1ull << 56)
+#define PCI64_ATTR_SWAP                 (1ull << 55)
+#define PCI64_ATTR_VIRTUAL1             (1ull << 54)
+
+#define PCI32_LOCAL_BASE                0
+#define PCI32_MAPPED_BASE               0x40000000
+#define PCI32_DIRECT_BASE               0x80000000
+
+#define IS_PCI32_MAPPED(x)              ((u64)(x) < PCI32_DIRECT_BASE && \
+                                         (u64)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI32_DIRECT(x)              ((u64)(x) >= PCI32_MAPPED_BASE)
+
+
+/*
+ * Bridge PMU Address Transaltion Entry Attibutes
+ */
+#define PCI32_ATE_V                     (0x1 << 0)
+#define PCI32_ATE_CO                    (0x1 << 1)	/* PIC ASIC ONLY */
+#define PCI32_ATE_PIO                   (0x1 << 1)	/* TIOCP ASIC ONLY */
+#define PCI32_ATE_MSI                   (0x1 << 2)
+#define PCI32_ATE_PREF                  (0x1 << 3)
+#define PCI32_ATE_BAR                   (0x1 << 4)
+#define PCI32_ATE_ADDR_SHFT             12
+
+#define MINIMAL_ATES_REQUIRED(addr, size) \
+	(IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1))
+
+#define MINIMAL_ATE_FLAG(addr, size) \
+	(MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0)
+
+/* bit 29 of the pci address is the SWAP bit */
+#define ATE_SWAPSHIFT                   29
+#define ATE_SWAP_ON(x)                  ((x) |= (1 << ATE_SWAPSHIFT))
+#define ATE_SWAP_OFF(x)                 ((x) &= ~(1 << ATE_SWAPSHIFT))
+
+/*
+ * I/O page size
+ */
+#if PAGE_SIZE < 16384
+#define IOPFNSHIFT                      12      /* 4K per mapped page */
+#else
+#define IOPFNSHIFT                      14      /* 16K per mapped page */
+#endif
+
+#define IOPGSIZE                        (1 << IOPFNSHIFT)
+#define IOPG(x)                         ((x) >> IOPFNSHIFT)
+#define IOPGOFF(x)                      ((x) & (IOPGSIZE-1))
+
+#define PCIBR_DEV_SWAP_DIR              (1ull << 19)
+#define PCIBR_CTRL_PAGE_SIZE            (0x1 << 21)
+
+/*
+ * PMU resources.
+ */
+struct ate_resource{
+	u64 *ate;
+	u64 num_ate;
+	u64 lowest_free_index;
+};
+
+struct pcibus_info {
+	struct pcibus_bussoft	pbi_buscommon;   /* common header */
+	u32                pbi_moduleid;
+	short                   pbi_bridge_type;
+	short                   pbi_bridge_mode;
+
+	struct ate_resource     pbi_int_ate_resource;
+	u64                pbi_int_ate_size;
+
+	u64                pbi_dir_xbase;
+	char                    pbi_hub_xid;
+
+	u64                pbi_devreg[8];
+
+	u32		pbi_valid_devices;
+	u32		pbi_enabled_devices;
+
+	spinlock_t              pbi_lock;
+};
+
+extern int  pcibr_init_provider(void);
+extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *);
+extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type);
+extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type);
+extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int);
+
+/*
+ * prototypes for the bridge asic register access routines in pcibr_reg.c
+ */
+extern void             pcireg_control_bit_clr(struct pcibus_info *, u64);
+extern void             pcireg_control_bit_set(struct pcibus_info *, u64);
+extern u64         pcireg_tflush_get(struct pcibus_info *);
+extern u64         pcireg_intr_status_get(struct pcibus_info *);
+extern void             pcireg_intr_enable_bit_clr(struct pcibus_info *, u64);
+extern void             pcireg_intr_enable_bit_set(struct pcibus_info *, u64);
+extern void             pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64);
+extern void             pcireg_force_intr_set(struct pcibus_info *, int);
+extern u64         pcireg_wrb_flush_get(struct pcibus_info *, int);
+extern void             pcireg_int_ate_set(struct pcibus_info *, int, u64);
+extern u64 __iomem *	pcireg_int_ate_addr(struct pcibus_info *, int);
+extern void 		pcibr_force_interrupt(struct sn_irq_info *sn_irq_info);
+extern void 		pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
+extern int 		pcibr_ate_alloc(struct pcibus_info *, int);
+extern void 		pcibr_ate_free(struct pcibus_info *, int);
+extern void 		ate_write(struct pcibus_info *, int, int, u64);
+extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
+				 void *resp, char **ssdt);
+extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
+				  int action, void *resp);
+extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus);
+#endif
diff --git a/arch/ia64/include/asm/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
new file mode 100644
index 00000000000..8f7c83d0f6d
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
@@ -0,0 +1,68 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
+#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
+
+/*
+ * SN pci asic types.  Do not ever renumber these or reuse values.  The
+ * values must agree with what prom thinks they are.
+ */
+
+#define PCIIO_ASIC_TYPE_UNKNOWN	0
+#define PCIIO_ASIC_TYPE_PPB	1
+#define PCIIO_ASIC_TYPE_PIC	2
+#define PCIIO_ASIC_TYPE_TIOCP	3
+#define PCIIO_ASIC_TYPE_TIOCA	4
+#define PCIIO_ASIC_TYPE_TIOCE	5
+
+#define PCIIO_ASIC_MAX_TYPES	6
+
+/*
+ * Common pciio bus provider data.  There should be one of these as the
+ * first field in any pciio based provider soft structure (e.g. pcibr_soft
+ * tioca_soft, etc).
+ */
+
+struct pcibus_bussoft {
+	u32		bs_asic_type;	/* chipset type */
+	u32		bs_xid;		/* xwidget id */
+	u32		bs_persist_busnum; /* Persistent Bus Number */
+	u32		bs_persist_segment; /* Segment Number */
+	u64		bs_legacy_io;	/* legacy io pio addr */
+	u64		bs_legacy_mem;	/* legacy mem pio addr */
+	u64		bs_base;	/* widget base */
+	struct xwidget_info	*bs_xwidget_info;
+};
+
+struct pci_controller;
+/*
+ * SN pci bus indirection
+ */
+
+struct sn_pcibus_provider {
+	dma_addr_t	(*dma_map)(struct pci_dev *, unsigned long, size_t, int flags);
+	dma_addr_t	(*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags);
+	void		(*dma_unmap)(struct pci_dev *, dma_addr_t, int);
+	void *		(*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *);
+ 	void		(*force_interrupt)(struct sn_irq_info *);
+ 	void		(*target_interrupt)(struct sn_irq_info *);
+};
+
+/*
+ * Flags used by the map interfaces
+ * bits 3:0 specifies format of passed in address
+ * bit  4   specifies that address is to be used for MSI
+ */
+
+#define SN_DMA_ADDRTYPE(x)	((x) & 0xf)
+#define     SN_DMA_ADDR_PHYS	1	/* address is an xio address. */
+#define     SN_DMA_ADDR_XIO	2	/* address is phys memory */
+#define SN_DMA_MSI		0x10	/* Bus address is to be used for MSI */
+
+extern struct sn_pcibus_provider *sn_pci_provider[];
+#endif				/* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h
new file mode 100644
index 00000000000..1c2382cea80
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pcidev.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_PCIDEV_H
+#define _ASM_IA64_SN_PCI_PCIDEV_H
+
+#include <linux/pci.h>
+
+/*
+ * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to
+ * the pcidev_info structs for all devices under a controller, we keep a
+ * list of pcidev_info under pci_controller->platform_data.
+ */
+struct sn_platform_data {
+	void *provider_soft;
+	struct list_head pcidev_info;
+};
+
+#define SN_PLATFORM_DATA(busdev) \
+	((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data))
+
+#define SN_PCIDEV_INFO(dev)	sn_pcidev_info_get(dev)
+
+/*
+ * Given a pci_bus, return the sn pcibus_bussoft struct.  Note that
+ * this only works for root busses, not for busses represented by PPB's.
+ */
+
+#define SN_PCIBUS_BUSSOFT(pci_bus) \
+	((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
+
+#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
+	((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
+/*
+ * Given a struct pci_dev, return the sn pcibus_bussoft struct.  Note
+ * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
+ * due to possible PPB's in the path.
+ */
+
+#define SN_PCIDEV_BUSSOFT(pci_dev) \
+	(SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info)
+
+#define SN_PCIDEV_BUSPROVIDER(pci_dev) \
+	(SN_PCIDEV_INFO(pci_dev)->pdi_provider)
+
+#define PCIIO_BUS_NONE	255      /* bus 255 reserved */
+#define PCIIO_SLOT_NONE 255
+#define PCIIO_FUNC_NONE 255
+#define PCIIO_VENDOR_ID_NONE	(-1)
+
+struct pcidev_info {
+	u64		pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */
+	u64		pdi_slot_host_handle;	/* Bus and devfn Host pci_dev */
+
+	struct pcibus_bussoft	*pdi_pcibus_info;	/* Kernel common bus soft */
+	struct pcidev_info	*pdi_host_pcidev_info;	/* Kernel Host pci_dev */
+	struct pci_dev		*pdi_linux_pcidev;	/* Kernel pci_dev */
+
+	struct sn_irq_info	*pdi_sn_irq_info;
+	struct sn_pcibus_provider *pdi_provider;	/* sn pci ops */
+	struct pci_dev 		*host_pci_dev;		/* host bus link */
+	struct list_head	pdi_list;		/* List of pcidev_info */
+};
+
+extern void sn_irq_fixup(struct pci_dev *pci_dev,
+			 struct sn_irq_info *sn_irq_info);
+extern void sn_irq_unfixup(struct pci_dev *pci_dev);
+extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
+extern void sn_bus_fixup(struct pci_bus *);
+extern void sn_acpi_bus_fixup(struct pci_bus *);
+extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *);
+extern void sn_bus_store_sysdata(struct pci_dev *dev);
+extern void sn_bus_free_sysdata(void);
+extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
+extern void sn_io_slot_fixup(struct pci_dev *);
+extern void sn_acpi_slot_fixup(struct pci_dev *);
+extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *,
+			      struct sn_irq_info *);
+extern void sn_pci_unfixup_slot(struct pci_dev *dev);
+extern void sn_irq_lh_init(void);
+#endif				/* _ASM_IA64_SN_PCI_PCIDEV_H */
diff --git a/arch/ia64/include/asm/sn/pda.h b/arch/ia64/include/asm/sn/pda.h
new file mode 100644
index 00000000000..1c5108d44d8
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pda.h
@@ -0,0 +1,69 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PDA_H
+#define _ASM_IA64_SN_PDA_H
+
+#include <linux/cache.h>
+#include <asm/percpu.h>
+#include <asm/system.h>
+
+
+/*
+ * CPU-specific data structure.
+ *
+ * One of these structures is allocated for each cpu of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together 
+ * all SN per-cpu data structures. 
+ */
+
+typedef struct pda_s {
+
+	/*
+	 * Support for SN LEDs
+	 */
+	volatile short	*led_address;
+	u8		led_state;
+	u8		hb_state;	/* supports blinking heartbeat leds */
+	unsigned int	hb_count;
+
+	unsigned int	idle_flag;
+	
+	volatile unsigned long *bedrock_rev_id;
+	volatile unsigned long *pio_write_status_addr;
+	unsigned long pio_write_status_val;
+	volatile unsigned long *pio_shub_war_cam_addr;
+
+	unsigned long	sn_in_service_ivecs[4];
+	int		sn_lb_int_war_ticks;
+	int		sn_last_irq;
+	int		sn_first_irq;
+} pda_t;
+
+
+#define CACHE_ALIGN(x)	(((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
+
+/*
+ * PDA
+ * Per-cpu private data area for each cpu. The PDA is located immediately after
+ * the IA64 cpu_data area. A full page is allocated for the cp_data area for each
+ * cpu but only a small amout of the page is actually used. We put the SNIA PDA
+ * in the same page as the cpu_data area. Note that there is a check in the setup
+ * code to verify that we don't overflow the page.
+ *
+ * Seems like we should should cache-line align the pda so that any changes in the
+ * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
+ * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
+ */
+DECLARE_PER_CPU(struct pda_s, pda_percpu);
+
+#define pda		(&__ia64_per_cpu_var(pda_percpu))
+
+#define pdacpu(cpu)	(&per_cpu(pda_percpu, cpu))
+
+#endif /* _ASM_IA64_SN_PDA_H */
diff --git a/arch/ia64/include/asm/sn/pic.h b/arch/ia64/include/asm/sn/pic.h
new file mode 100644
index 00000000000..5f9da5fd6e5
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pic.h
@@ -0,0 +1,261 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_PIC_H
+#define _ASM_IA64_SN_PCI_PIC_H
+
+/*
+ * PIC AS DEVICE ZERO
+ * ------------------
+ *
+ * PIC handles PCI/X busses.  PCI/X requires that the 'bridge' (i.e. PIC)
+ * be designated as 'device 0'.   That is a departure from earlier SGI
+ * PCI bridges.  Because of that we use config space 1 to access the
+ * config space of the first actual PCI device on the bus.
+ * Here's what the PIC manual says:
+ *
+ *     The current PCI-X bus specification now defines that the parent
+ *     hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC
+ *     reduced the total number of devices from 8 to 4 and removed the
+ *     device registers and windows, now only supporting devices 0,1,2, and
+ *     3. PIC did leave all 8 configuration space windows. The reason was
+ *     there was nothing to gain by removing them. Here in lies the problem.
+ *     The device numbering we do using 0 through 3 is unrelated to the device
+ *     numbering which PCI-X requires in configuration space. In the past we
+ *     correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc.
+ *     PCI-X requires we start a 1, not 0 and currently the PX brick
+ *     does associate our:
+ *
+ *         device 0 with configuration space window 1,
+ *         device 1 with configuration space window 2,
+ *         device 2 with configuration space window 3,
+ *         device 3 with configuration space window 4.
+ *
+ * The net effect is that all config space access are off-by-one with
+ * relation to other per-slot accesses on the PIC.
+ * Here is a table that shows some of that:
+ *
+ *                               Internal Slot#
+ *           |
+ *           |     0         1        2         3
+ * ----------|---------------------------------------
+ * config    |  0x21000   0x22000  0x23000   0x24000
+ *           |
+ * even rrb  |  0[0]      n/a      1[0]      n/a	[] == implied even/odd
+ *           |
+ * odd rrb   |  n/a       0[1]     n/a       1[1]
+ *           |
+ * int dev   |  00       01        10        11
+ *           |
+ * ext slot# |  1        2         3         4
+ * ----------|---------------------------------------
+ */
+
+#define PIC_ATE_TARGETID_SHFT           8
+#define PIC_HOST_INTR_ADDR              0x0000FFFFFFFFFFFFUL
+#define PIC_PCI64_ATTR_TARG_SHFT        60
+
+
+/*****************************************************************************
+ *********************** PIC MMR structure mapping ***************************
+ *****************************************************************************/
+
+/* NOTE: PIC WAR. PV#854697.  PIC does not allow writes just to [31:0]
+ * of a 64-bit register.  When writing PIC registers, always write the
+ * entire 64 bits.
+ */
+
+struct pic {
+
+    /* 0x000000-0x00FFFF -- Local Registers */
+
+    /* 0x000000-0x000057 -- Standard Widget Configuration */
+    u64		p_wid_id;			/* 0x000000 */
+    u64		p_wid_stat;			/* 0x000008 */
+    u64		p_wid_err_upper;		/* 0x000010 */
+    u64		p_wid_err_lower;		/* 0x000018 */
+    #define p_wid_err p_wid_err_lower
+    u64		p_wid_control;			/* 0x000020 */
+    u64		p_wid_req_timeout;		/* 0x000028 */
+    u64		p_wid_int_upper;		/* 0x000030 */
+    u64		p_wid_int_lower;		/* 0x000038 */
+    #define p_wid_int p_wid_int_lower
+    u64		p_wid_err_cmdword;		/* 0x000040 */
+    u64		p_wid_llp;			/* 0x000048 */
+    u64		p_wid_tflush;			/* 0x000050 */
+
+    /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */
+    u64		p_wid_aux_err;			/* 0x000058 */
+    u64		p_wid_resp_upper;		/* 0x000060 */
+    u64		p_wid_resp_lower;		/* 0x000068 */
+    #define p_wid_resp p_wid_resp_lower
+    u64		p_wid_tst_pin_ctrl;		/* 0x000070 */
+    u64		p_wid_addr_lkerr;		/* 0x000078 */
+
+    /* 0x000080-0x00008F -- PMU & MAP */
+    u64		p_dir_map;			/* 0x000080 */
+    u64		_pad_000088;			/* 0x000088 */
+
+    /* 0x000090-0x00009F -- SSRAM */
+    u64		p_map_fault;			/* 0x000090 */
+    u64		_pad_000098;			/* 0x000098 */
+
+    /* 0x0000A0-0x0000AF -- Arbitration */
+    u64		p_arb;				/* 0x0000A0 */
+    u64		_pad_0000A8;			/* 0x0000A8 */
+
+    /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
+    u64		p_ate_parity_err;		/* 0x0000B0 */
+    u64		_pad_0000B8;			/* 0x0000B8 */
+
+    /* 0x0000C0-0x0000FF -- PCI/GIO */
+    u64		p_bus_timeout;			/* 0x0000C0 */
+    u64		p_pci_cfg;			/* 0x0000C8 */
+    u64		p_pci_err_upper;		/* 0x0000D0 */
+    u64		p_pci_err_lower;		/* 0x0000D8 */
+    #define p_pci_err p_pci_err_lower
+    u64		_pad_0000E0[4];			/* 0x0000{E0..F8} */
+
+    /* 0x000100-0x0001FF -- Interrupt */
+    u64		p_int_status;			/* 0x000100 */
+    u64		p_int_enable;			/* 0x000108 */
+    u64		p_int_rst_stat;			/* 0x000110 */
+    u64		p_int_mode;			/* 0x000118 */
+    u64		p_int_device;			/* 0x000120 */
+    u64		p_int_host_err;			/* 0x000128 */
+    u64		p_int_addr[8];			/* 0x0001{30,,,68} */
+    u64		p_err_int_view;			/* 0x000170 */
+    u64		p_mult_int;			/* 0x000178 */
+    u64		p_force_always[8];		/* 0x0001{80,,,B8} */
+    u64		p_force_pin[8];			/* 0x0001{C0,,,F8} */
+
+    /* 0x000200-0x000298 -- Device */
+    u64		p_device[4];			/* 0x0002{00,,,18} */
+    u64		_pad_000220[4];			/* 0x0002{20,,,38} */
+    u64		p_wr_req_buf[4];		/* 0x0002{40,,,58} */
+    u64		_pad_000260[4];			/* 0x0002{60,,,78} */
+    u64		p_rrb_map[2];			/* 0x0002{80,,,88} */
+    #define p_even_resp p_rrb_map[0]			/* 0x000280 */
+    #define p_odd_resp  p_rrb_map[1]			/* 0x000288 */
+    u64		p_resp_status;			/* 0x000290 */
+    u64		p_resp_clear;			/* 0x000298 */
+
+    u64		_pad_0002A0[12];		/* 0x0002{A0..F8} */
+
+    /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
+    struct {
+	u64	upper;				/* 0x0003{00,,,F0} */
+	u64	lower;				/* 0x0003{08,,,F8} */
+    } p_buf_addr_match[16];
+
+    /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
+    struct {
+	u64	flush_w_touch;			/* 0x000{400,,,5C0} */
+	u64	flush_wo_touch;			/* 0x000{408,,,5C8} */
+	u64	inflight;			/* 0x000{410,,,5D0} */
+	u64	prefetch;			/* 0x000{418,,,5D8} */
+	u64	total_pci_retry;		/* 0x000{420,,,5E0} */
+	u64	max_pci_retry;			/* 0x000{428,,,5E8} */
+	u64	max_latency;			/* 0x000{430,,,5F0} */
+	u64	clear_all;			/* 0x000{438,,,5F8} */
+    } p_buf_count[8];
+
+
+    /* 0x000600-0x0009FF -- PCI/X registers */
+    u64		p_pcix_bus_err_addr;		/* 0x000600 */
+    u64		p_pcix_bus_err_attr;		/* 0x000608 */
+    u64		p_pcix_bus_err_data;		/* 0x000610 */
+    u64		p_pcix_pio_split_addr;		/* 0x000618 */
+    u64		p_pcix_pio_split_attr;		/* 0x000620 */
+    u64		p_pcix_dma_req_err_attr;	/* 0x000628 */
+    u64		p_pcix_dma_req_err_addr;	/* 0x000630 */
+    u64		p_pcix_timeout;			/* 0x000638 */
+
+    u64		_pad_000640[120];		/* 0x000{640,,,9F8} */
+
+    /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
+    struct {
+	u64	p_buf_addr;			/* 0x000{A00,,,AF0} */
+	u64	p_buf_attr;			/* 0X000{A08,,,AF8} */
+    } p_pcix_read_buf_64[16];
+
+    struct {
+	u64	p_buf_addr;			/* 0x000{B00,,,BE0} */
+	u64	p_buf_attr;			/* 0x000{B08,,,BE8} */
+	u64	p_buf_valid;			/* 0x000{B10,,,BF0} */
+	u64	__pad1;				/* 0x000{B18,,,BF8} */
+    } p_pcix_write_buf_64[8];
+
+    /* End of Local Registers -- Start of Address Map space */
+
+    char		_pad_000c00[0x010000 - 0x000c00];
+
+    /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */
+    u64		p_int_ate_ram[1024];		/* 0x010000-0x011fff */
+
+    /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */
+    u64		p_int_ate_ram_mp[1024];		/* 0x012000-0x013fff */
+
+    char		_pad_014000[0x18000 - 0x014000];
+
+    /* 0x18000-0x197F8 -- PIC Write Request Ram */
+    u64		p_wr_req_lower[256];		/* 0x18000 - 0x187F8 */
+    u64		p_wr_req_upper[256];		/* 0x18800 - 0x18FF8 */
+    u64		p_wr_req_parity[256];		/* 0x19000 - 0x197F8 */
+
+    char		_pad_019800[0x20000 - 0x019800];
+
+    /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */
+    union {
+	u8		c[0x1000 / 1];			/* 0x02{0000,,,7FFF} */
+	u16	s[0x1000 / 2];			/* 0x02{0000,,,7FFF} */
+	u32	l[0x1000 / 4];			/* 0x02{0000,,,7FFF} */
+	u64	d[0x1000 / 8];			/* 0x02{0000,,,7FFF} */
+	union {
+	    u8	c[0x100 / 1];
+	    u16	s[0x100 / 2];
+	    u32	l[0x100 / 4];
+	    u64	d[0x100 / 8];
+	} f[8];
+    } p_type0_cfg_dev[8];				/* 0x02{0000,,,7FFF} */
+
+    /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
+    union {
+	u8		c[0x1000 / 1];			/* 0x028000-0x029000 */
+	u16	s[0x1000 / 2];			/* 0x028000-0x029000 */
+	u32	l[0x1000 / 4];			/* 0x028000-0x029000 */
+	u64	d[0x1000 / 8];			/* 0x028000-0x029000 */
+	union {
+	    u8	c[0x100 / 1];
+	    u16	s[0x100 / 2];
+	    u32	l[0x100 / 4];
+	    u64	d[0x100 / 8];
+	} f[8];
+    } p_type1_cfg;					/* 0x028000-0x029000 */
+
+    char		_pad_029000[0x030000-0x029000];
+
+    /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
+    union {
+	u8		c[8 / 1];
+	u16	s[8 / 2];
+	u32	l[8 / 4];
+	u64	d[8 / 8];
+    } p_pci_iack;					/* 0x030000-0x030007 */
+
+    char		_pad_030007[0x040000-0x030008];
+
+    /* 0x040000-0x030007 -- PCIX Special Cycle */
+    union {
+	u8		c[8 / 1];
+	u16	s[8 / 2];
+	u32	l[8 / 4];
+	u64	d[8 / 8];
+    } p_pcix_cycle;					/* 0x040000-0x040007 */
+};
+
+#endif                          /* _ASM_IA64_SN_PCI_PIC_H */
diff --git a/arch/ia64/include/asm/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h
new file mode 100644
index 00000000000..2d78f4c5a45
--- /dev/null
+++ b/arch/ia64/include/asm/sn/rw_mmr.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+#ifndef _ASM_IA64_SN_RW_MMR_H
+#define _ASM_IA64_SN_RW_MMR_H
+
+
+/*
+ * This file that access MMRs via uncached physical addresses.
+ * 	pio_phys_read_mmr  - read an MMR
+ * 	pio_phys_write_mmr - write an MMR
+ * 	pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
+ *		Second MMR will be skipped if address is NULL
+ *
+ * Addresses passed to these routines should be uncached physical addresses
+ * ie., 0x80000....
+ */
+
+
+extern long pio_phys_read_mmr(volatile long *mmr); 
+extern void pio_phys_write_mmr(volatile long *mmr, long val);
+extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2); 
+
+#endif /* _ASM_IA64_SN_RW_MMR_H */
diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h
new file mode 100644
index 00000000000..7de1d1d4b71
--- /dev/null
+++ b/arch/ia64/include/asm/sn/shub_mmr.h
@@ -0,0 +1,502 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2005 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUB_MMR_H
+#define _ASM_IA64_SN_SHUB_MMR_H
+
+/* ==================================================================== */
+/*                        Register "SH_IPI_INT"                         */
+/*               SHub Inter-Processor Interrupt Registers               */
+/* ==================================================================== */
+#define SH1_IPI_INT			__IA64_UL_CONST(0x0000000110000380)
+#define SH2_IPI_INT			__IA64_UL_CONST(0x0000000010000380)
+
+/*   SH_IPI_INT_TYPE                                                    */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_IPI_INT_TYPE_SHFT				0
+#define SH_IPI_INT_TYPE_MASK		__IA64_UL_CONST(0x0000000000000007)
+
+/*   SH_IPI_INT_AGT                                                     */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_IPI_INT_AGT_SHFT				3
+#define SH_IPI_INT_AGT_MASK		__IA64_UL_CONST(0x0000000000000008)
+
+/*   SH_IPI_INT_PID                                                     */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_IPI_INT_PID_SHFT                      	4
+#define SH_IPI_INT_PID_MASK		__IA64_UL_CONST(0x00000000000ffff0)
+
+/*   SH_IPI_INT_BASE                                                    */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_IPI_INT_BASE_SHFT				21
+#define SH_IPI_INT_BASE_MASK 		__IA64_UL_CONST(0x0003ffffffe00000)
+
+/*   SH_IPI_INT_IDX                                                     */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_IPI_INT_IDX_SHFT				52
+#define SH_IPI_INT_IDX_MASK		__IA64_UL_CONST(0x0ff0000000000000)
+
+/*   SH_IPI_INT_SEND                                                    */
+/*   Description:  Send Interrupt Message to PI, This generates a puls  */
+#define SH_IPI_INT_SEND_SHFT				63
+#define SH_IPI_INT_SEND_MASK		__IA64_UL_CONST(0x8000000000000000)
+
+/* ==================================================================== */
+/*                     Register "SH_EVENT_OCCURRED"                     */
+/*                    SHub Interrupt Event Occurred                     */
+/* ==================================================================== */
+#define SH1_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000110010000)
+#define SH1_EVENT_OCCURRED_ALIAS	__IA64_UL_CONST(0x0000000110010008)
+#define SH2_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000010010000)
+#define SH2_EVENT_OCCURRED_ALIAS 	__IA64_UL_CONST(0x0000000010010008)
+
+/* ==================================================================== */
+/*                     Register "SH_PI_CAM_CONTROL"                     */
+/*                      CRB CAM MMR Access Control                      */
+/* ==================================================================== */
+#define SH1_PI_CAM_CONTROL		__IA64_UL_CONST(0x0000000120050300)
+
+/* ==================================================================== */
+/*                        Register "SH_SHUB_ID"                         */
+/*                            SHub ID Number                            */
+/* ==================================================================== */
+#define SH1_SHUB_ID			__IA64_UL_CONST(0x0000000110060580)
+#define SH1_SHUB_ID_REVISION_SHFT			28
+#define SH1_SHUB_ID_REVISION_MASK	__IA64_UL_CONST(0x00000000f0000000)
+
+/* ==================================================================== */
+/*                          Register "SH_RTC"                           */
+/*                           Real-time Clock                            */
+/* ==================================================================== */
+#define SH1_RTC				__IA64_UL_CONST(0x00000001101c0000)
+#define SH2_RTC				__IA64_UL_CONST(0x00000002101c0000)
+#define SH_RTC_MASK			__IA64_UL_CONST(0x007fffffffffffff)
+
+/* ==================================================================== */
+/*                   Register "SH_PIO_WRITE_STATUS_0|1"                 */
+/*                      PIO Write Status for CPU 0 & 1                  */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000120070200)
+#define SH1_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000120070280)
+#define SH2_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000020070200)
+#define SH2_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000020070280)
+#define SH2_PIO_WRITE_STATUS_2		__IA64_UL_CONST(0x0000000020070300)
+#define SH2_PIO_WRITE_STATUS_3		__IA64_UL_CONST(0x0000000020070380)
+
+/*   SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK                               */
+/*   Description:  Deadlock response detected                           */
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT		1
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \
+					__IA64_UL_CONST(0x0000000000000002)
+
+/*   SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT                          */
+/*   Description:  Count of currently pending PIO writes                */
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT	56
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \
+					__IA64_UL_CONST(0x3f00000000000000)
+
+/* ==================================================================== */
+/*                Register "SH_PIO_WRITE_STATUS_0_ALIAS"                */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000120070208)
+#define SH2_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000020070208)
+
+/* ==================================================================== */
+/*                     Register "SH_EVENT_OCCURRED"                     */
+/*                    SHub Interrupt Event Occurred                     */
+/* ==================================================================== */
+/*   SH_EVENT_OCCURRED_UART_INT                                         */
+/*   Description:  Pending Junk Bus UART Interrupt                      */
+#define SH_EVENT_OCCURRED_UART_INT_SHFT			20
+#define SH_EVENT_OCCURRED_UART_INT_MASK	__IA64_UL_CONST(0x0000000000100000)
+
+/*   SH_EVENT_OCCURRED_IPI_INT                                          */
+/*   Description:  Pending IPI Interrupt                                */
+#define SH_EVENT_OCCURRED_IPI_INT_SHFT			28
+#define SH_EVENT_OCCURRED_IPI_INT_MASK	__IA64_UL_CONST(0x0000000010000000)
+
+/*   SH_EVENT_OCCURRED_II_INT0                                          */
+/*   Description:  Pending II 0 Interrupt                               */
+#define SH_EVENT_OCCURRED_II_INT0_SHFT			29
+#define SH_EVENT_OCCURRED_II_INT0_MASK	__IA64_UL_CONST(0x0000000020000000)
+
+/*   SH_EVENT_OCCURRED_II_INT1                                          */
+/*   Description:  Pending II 1 Interrupt                               */
+#define SH_EVENT_OCCURRED_II_INT1_SHFT			30
+#define SH_EVENT_OCCURRED_II_INT1_MASK	__IA64_UL_CONST(0x0000000040000000)
+
+/*   SH2_EVENT_OCCURRED_EXTIO_INT2                                      */
+/*   Description:  Pending SHUB 2 EXT IO INT2                           */
+#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT		33
+#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000)
+
+/*   SH2_EVENT_OCCURRED_EXTIO_INT3                                      */
+/*   Description:  Pending SHUB 2 EXT IO INT3                           */
+#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT		34
+#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000)
+
+#define SH_ALL_INT_MASK \
+	(SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \
+	 SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \
+	 SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \
+	 SH2_EVENT_OCCURRED_EXTIO_INT3_MASK)
+
+
+/* ==================================================================== */
+/*                         LEDS                                         */
+/* ==================================================================== */
+#define SH1_REAL_JUNK_BUS_LED0			0x7fed00000UL
+#define SH1_REAL_JUNK_BUS_LED1			0x7fed10000UL
+#define SH1_REAL_JUNK_BUS_LED2			0x7fed20000UL
+#define SH1_REAL_JUNK_BUS_LED3			0x7fed30000UL
+
+#define SH2_REAL_JUNK_BUS_LED0			0xf0000000UL
+#define SH2_REAL_JUNK_BUS_LED1			0xf0010000UL
+#define SH2_REAL_JUNK_BUS_LED2			0xf0020000UL
+#define SH2_REAL_JUNK_BUS_LED3			0xf0030000UL
+
+/* ==================================================================== */
+/*                         Register "SH1_PTC_0"                         */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH1_PTC_0			__IA64_UL_CONST(0x00000001101a0000)
+
+/*   SH1_PTC_0_A                                                        */
+/*   Description:  Type                                                 */
+#define SH1_PTC_0_A_SHFT				0
+
+/*   SH1_PTC_0_PS                                                       */
+/*   Description:  Page Size                                            */
+#define SH1_PTC_0_PS_SHFT				2
+
+/*   SH1_PTC_0_RID                                                      */
+/*   Description:  Region ID                                            */
+#define SH1_PTC_0_RID_SHFT				8
+
+/*   SH1_PTC_0_START                                                    */
+/*   Description:  Start                                                */
+#define SH1_PTC_0_START_SHFT				63
+
+/* ==================================================================== */
+/*                         Register "SH1_PTC_1"                         */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH1_PTC_1			__IA64_UL_CONST(0x00000001101a0080)
+
+/*   SH1_PTC_1_START                                                    */
+/*   Description:  PTC_1 Start                                          */
+#define SH1_PTC_1_START_SHFT				63
+
+/* ==================================================================== */
+/*                         Register "SH2_PTC"                           */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH2_PTC				__IA64_UL_CONST(0x0000000170000000)
+
+/*   SH2_PTC_A                                                          */
+/*   Description:  Type                                                 */
+#define SH2_PTC_A_SHFT					0
+
+/*   SH2_PTC_PS                                                         */
+/*   Description:  Page Size                                            */
+#define SH2_PTC_PS_SHFT					2
+
+/*   SH2_PTC_RID                                                      */
+/*   Description:  Region ID                                            */
+#define SH2_PTC_RID_SHFT				4
+
+/*   SH2_PTC_START                                                      */
+/*   Description:  Start                                                */
+#define SH2_PTC_START_SHFT				63
+
+/*   SH2_PTC_ADDR_RID                                                   */
+/*   Description:  Region ID                                            */
+#define SH2_PTC_ADDR_SHFT				4
+#define SH2_PTC_ADDR_MASK		__IA64_UL_CONST(0x1ffffffffffff000)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC1_INT_CONFIG"                     */
+/*                SHub RTC 1 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000110001480)
+#define SH2_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000010001480)
+#define SH_RTC1_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC1_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC1_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC1_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC1_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
+
+/*   SH_RTC1_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC1_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC1_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
+
+/*   SH_RTC1_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC1_INT_CONFIG_PID_SHFT			4
+#define SH_RTC1_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
+
+/*   SH_RTC1_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC1_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC1_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
+
+/*   SH_RTC1_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC1_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC1_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC1_INT_ENABLE"                     */
+/*                SHub RTC 1 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000110001500)
+#define SH2_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000010001500)
+#define SH_RTC1_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC1_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC1_INT_ENABLE_RTC1_ENABLE                                     */
+/*   Description:  Enable RTC 1 Interrupt                               */
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT		0
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC2_INT_CONFIG"                     */
+/*                SHub RTC 2 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000110001580)
+#define SH2_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000010001580)
+#define SH_RTC2_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC2_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC2_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC2_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC2_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
+
+/*   SH_RTC2_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC2_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC2_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
+
+/*   SH_RTC2_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC2_INT_CONFIG_PID_SHFT			4
+#define SH_RTC2_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
+
+/*   SH_RTC2_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC2_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC2_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
+
+/*   SH_RTC2_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC2_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC2_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC2_INT_ENABLE"                     */
+/*                SHub RTC 2 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000110001600)
+#define SH2_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000010001600)
+#define SH_RTC2_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC2_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC2_INT_ENABLE_RTC2_ENABLE                                     */
+/*   Description:  Enable RTC 2 Interrupt                               */
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT		0
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC3_INT_CONFIG"                     */
+/*                SHub RTC 3 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000110001680)
+#define SH2_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000010001680)
+#define SH_RTC3_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC3_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC3_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC3_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC3_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
+
+/*   SH_RTC3_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC3_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC3_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
+
+/*   SH_RTC3_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC3_INT_CONFIG_PID_SHFT			4
+#define SH_RTC3_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
+
+/*   SH_RTC3_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC3_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC3_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
+
+/*   SH_RTC3_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC3_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC3_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC3_INT_ENABLE"                     */
+/*                SHub RTC 3 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000110001700)
+#define SH2_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000010001700)
+#define SH_RTC3_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC3_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC3_INT_ENABLE_RTC3_ENABLE                                     */
+/*   Description:  Enable RTC 3 Interrupt                               */
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT		0
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
+
+/*   SH_EVENT_OCCURRED_RTC1_INT                                         */
+/*   Description:  Pending RTC 1 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC1_INT_SHFT			24
+#define SH_EVENT_OCCURRED_RTC1_INT_MASK	__IA64_UL_CONST(0x0000000001000000)
+
+/*   SH_EVENT_OCCURRED_RTC2_INT                                         */
+/*   Description:  Pending RTC 2 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC2_INT_SHFT			25
+#define SH_EVENT_OCCURRED_RTC2_INT_MASK	__IA64_UL_CONST(0x0000000002000000)
+
+/*   SH_EVENT_OCCURRED_RTC3_INT                                         */
+/*   Description:  Pending RTC 3 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC3_INT_SHFT			26
+#define SH_EVENT_OCCURRED_RTC3_INT_MASK	__IA64_UL_CONST(0x0000000004000000)
+
+/* ==================================================================== */
+/*                       Register "SH_IPI_ACCESS"                       */
+/*                 CPU interrupt Access Permission Bits                 */
+/* ==================================================================== */
+
+#define SH1_IPI_ACCESS			__IA64_UL_CONST(0x0000000110060480)
+#define SH2_IPI_ACCESS0			__IA64_UL_CONST(0x0000000010060c00)
+#define SH2_IPI_ACCESS1			__IA64_UL_CONST(0x0000000010060c80)
+#define SH2_IPI_ACCESS2			__IA64_UL_CONST(0x0000000010060d00)
+#define SH2_IPI_ACCESS3			__IA64_UL_CONST(0x0000000010060d80)
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPB"                        */
+/*                  RTC Compare Value for Processor B                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPB			__IA64_UL_CONST(0x00000001101b0080)
+#define SH2_INT_CMPB			__IA64_UL_CONST(0x00000000101b0080)
+#define SH_INT_CMPB_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPB_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_INT_CMPB_REAL_TIME_CMPB                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT			0
+#define SH_INT_CMPB_REAL_TIME_CMPB_MASK	__IA64_UL_CONST(0x007fffffffffffff)
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPC"                        */
+/*                  RTC Compare Value for Processor C                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPC			__IA64_UL_CONST(0x00000001101b0100)
+#define SH2_INT_CMPC			__IA64_UL_CONST(0x00000000101b0100)
+#define SH_INT_CMPC_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPC_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_INT_CMPC_REAL_TIME_CMPC                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT			0
+#define SH_INT_CMPC_REAL_TIME_CMPC_MASK	__IA64_UL_CONST(0x007fffffffffffff)
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPD"                        */
+/*                  RTC Compare Value for Processor D                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPD			__IA64_UL_CONST(0x00000001101b0180)
+#define SH2_INT_CMPD			__IA64_UL_CONST(0x00000000101b0180)
+#define SH_INT_CMPD_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPD_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_INT_CMPD_REAL_TIME_CMPD                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT			0
+#define SH_INT_CMPD_REAL_TIME_CMPD_MASK	__IA64_UL_CONST(0x007fffffffffffff)
+
+/* ==================================================================== */
+/*                Register "SH_MD_DQLP_MMR_DIR_PRIVEC0"                 */
+/*                      privilege vector for acc=0                      */
+/* ==================================================================== */
+#define SH1_MD_DQLP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100030300)
+
+/* ==================================================================== */
+/*                Register "SH_MD_DQRP_MMR_DIR_PRIVEC0"                 */
+/*                      privilege vector for acc=0                      */
+/* ==================================================================== */
+#define SH1_MD_DQRP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100050300)
+
+/* ==================================================================== */
+/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
+/* and SHUB2 that it makes sense to define a geberic name for the MMR.  */
+/* It is acceptible to use (for example) SH_IPI_INT to reference the    */
+/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based  */
+/* on the type of the SHUB. Do not use these #defines in performance    */
+/* critical code  or loops - there is a small performance penalty.      */
+/* ==================================================================== */
+#define shubmmr(a,b) 		(is_shub2() ? a##2_##b : a##1_##b)
+
+#define SH_REAL_JUNK_BUS_LED0	shubmmr(SH, REAL_JUNK_BUS_LED0)
+#define SH_IPI_INT		shubmmr(SH, IPI_INT)
+#define SH_EVENT_OCCURRED	shubmmr(SH, EVENT_OCCURRED)
+#define SH_EVENT_OCCURRED_ALIAS	shubmmr(SH, EVENT_OCCURRED_ALIAS)
+#define SH_RTC			shubmmr(SH, RTC)
+#define SH_RTC1_INT_CONFIG	shubmmr(SH, RTC1_INT_CONFIG)
+#define SH_RTC1_INT_ENABLE	shubmmr(SH, RTC1_INT_ENABLE)
+#define SH_RTC2_INT_CONFIG	shubmmr(SH, RTC2_INT_CONFIG)
+#define SH_RTC2_INT_ENABLE	shubmmr(SH, RTC2_INT_ENABLE)
+#define SH_RTC3_INT_CONFIG	shubmmr(SH, RTC3_INT_CONFIG)
+#define SH_RTC3_INT_ENABLE	shubmmr(SH, RTC3_INT_ENABLE)
+#define SH_INT_CMPB		shubmmr(SH, INT_CMPB)
+#define SH_INT_CMPC		shubmmr(SH, INT_CMPC)
+#define SH_INT_CMPD		shubmmr(SH, INT_CMPD)
+
+/* ========================================================================== */
+/*                        Register "SH2_BT_ENG_CSR_0"                         */
+/*                    Engine 0 Control and Status Register                    */
+/* ========================================================================== */
+
+#define SH2_BT_ENG_CSR_0		__IA64_UL_CONST(0x0000000030040000)
+#define SH2_BT_ENG_SRC_ADDR_0		__IA64_UL_CONST(0x0000000030040080)
+#define SH2_BT_ENG_DEST_ADDR_0		__IA64_UL_CONST(0x0000000030040100)
+#define SH2_BT_ENG_NOTIF_ADDR_0		__IA64_UL_CONST(0x0000000030040180)
+
+/* ========================================================================== */
+/*                       BTE interfaces 1-3                                   */
+/* ========================================================================== */
+
+#define SH2_BT_ENG_CSR_1		__IA64_UL_CONST(0x0000000030050000)
+#define SH2_BT_ENG_CSR_2		__IA64_UL_CONST(0x0000000030060000)
+#define SH2_BT_ENG_CSR_3		__IA64_UL_CONST(0x0000000030070000)
+
+#endif /* _ASM_IA64_SN_SHUB_MMR_H */
diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
new file mode 100644
index 00000000000..22a6f18a531
--- /dev/null
+++ b/arch/ia64/include/asm/sn/shubio.h
@@ -0,0 +1,3358 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUBIO_H
+#define _ASM_IA64_SN_SHUBIO_H
+
+#define HUB_WIDGET_ID_MAX	0xf
+#define IIO_NUM_ITTES		7
+#define HUB_NUM_BIG_WINDOW	(IIO_NUM_ITTES - 1)
+
+#define		IIO_WID			0x00400000	/* Crosstalk Widget Identification */
+							/* This register is also accessible from
+							 * Crosstalk at address 0x0.  */
+#define		IIO_WSTAT		0x00400008	/* Crosstalk Widget Status */
+#define		IIO_WCR			0x00400020	/* Crosstalk Widget Control Register */
+#define		IIO_ILAPR		0x00400100	/* IO Local Access Protection Register */
+#define		IIO_ILAPO		0x00400108	/* IO Local Access Protection Override */
+#define		IIO_IOWA		0x00400110	/* IO Outbound Widget Access */
+#define		IIO_IIWA		0x00400118	/* IO Inbound Widget Access */
+#define		IIO_IIDEM		0x00400120	/* IO Inbound Device Error Mask */
+#define		IIO_ILCSR		0x00400128	/* IO LLP Control and Status Register */
+#define		IIO_ILLR		0x00400130	/* IO LLP Log Register    */
+#define		IIO_IIDSR		0x00400138	/* IO Interrupt Destination */
+
+#define		IIO_IGFX0		0x00400140	/* IO Graphics Node-Widget Map 0 */
+#define		IIO_IGFX1		0x00400148	/* IO Graphics Node-Widget Map 1 */
+
+#define		IIO_ISCR0		0x00400150	/* IO Scratch Register 0 */
+#define		IIO_ISCR1		0x00400158	/* IO Scratch Register 1 */
+
+#define		IIO_ITTE1		0x00400160	/* IO Translation Table Entry 1 */
+#define		IIO_ITTE2		0x00400168	/* IO Translation Table Entry 2 */
+#define		IIO_ITTE3		0x00400170	/* IO Translation Table Entry 3 */
+#define		IIO_ITTE4		0x00400178	/* IO Translation Table Entry 4 */
+#define		IIO_ITTE5		0x00400180	/* IO Translation Table Entry 5 */
+#define		IIO_ITTE6		0x00400188	/* IO Translation Table Entry 6 */
+#define		IIO_ITTE7		0x00400190	/* IO Translation Table Entry 7 */
+
+#define		IIO_IPRB0		0x00400198	/* IO PRB Entry 0   */
+#define		IIO_IPRB8		0x004001A0	/* IO PRB Entry 8   */
+#define		IIO_IPRB9		0x004001A8	/* IO PRB Entry 9   */
+#define		IIO_IPRBA		0x004001B0	/* IO PRB Entry A   */
+#define		IIO_IPRBB		0x004001B8	/* IO PRB Entry B   */
+#define		IIO_IPRBC		0x004001C0	/* IO PRB Entry C   */
+#define		IIO_IPRBD		0x004001C8	/* IO PRB Entry D   */
+#define		IIO_IPRBE		0x004001D0	/* IO PRB Entry E   */
+#define		IIO_IPRBF		0x004001D8	/* IO PRB Entry F   */
+
+#define		IIO_IXCC		0x004001E0	/* IO Crosstalk Credit Count Timeout */
+#define		IIO_IMEM		0x004001E8	/* IO Miscellaneous Error Mask */
+#define		IIO_IXTT		0x004001F0	/* IO Crosstalk Timeout Threshold */
+#define		IIO_IECLR		0x004001F8	/* IO Error Clear Register */
+#define		IIO_IBCR		0x00400200	/* IO BTE Control Register */
+
+#define		IIO_IXSM		0x00400208	/* IO Crosstalk Spurious Message */
+#define		IIO_IXSS		0x00400210	/* IO Crosstalk Spurious Sideband */
+
+#define		IIO_ILCT		0x00400218	/* IO LLP Channel Test    */
+
+#define		IIO_IIEPH1 		0x00400220	/* IO Incoming Error Packet Header, Part 1 */
+#define		IIO_IIEPH2 		0x00400228	/* IO Incoming Error Packet Header, Part 2 */
+
+#define		IIO_ISLAPR 		0x00400230	/* IO SXB Local Access Protection Regster */
+#define		IIO_ISLAPO 		0x00400238	/* IO SXB Local Access Protection Override */
+
+#define		IIO_IWI			0x00400240	/* IO Wrapper Interrupt Register */
+#define		IIO_IWEL		0x00400248	/* IO Wrapper Error Log Register */
+#define		IIO_IWC			0x00400250	/* IO Wrapper Control Register */
+#define		IIO_IWS			0x00400258	/* IO Wrapper Status Register */
+#define		IIO_IWEIM		0x00400260	/* IO Wrapper Error Interrupt Masking Register */
+
+#define		IIO_IPCA		0x00400300	/* IO PRB Counter Adjust */
+
+#define		IIO_IPRTE0_A		0x00400308	/* IO PIO Read Address Table Entry 0, Part A */
+#define		IIO_IPRTE1_A		0x00400310	/* IO PIO Read Address Table Entry 1, Part A */
+#define		IIO_IPRTE2_A		0x00400318	/* IO PIO Read Address Table Entry 2, Part A */
+#define		IIO_IPRTE3_A		0x00400320	/* IO PIO Read Address Table Entry 3, Part A */
+#define		IIO_IPRTE4_A		0x00400328	/* IO PIO Read Address Table Entry 4, Part A */
+#define		IIO_IPRTE5_A		0x00400330	/* IO PIO Read Address Table Entry 5, Part A */
+#define		IIO_IPRTE6_A		0x00400338	/* IO PIO Read Address Table Entry 6, Part A */
+#define		IIO_IPRTE7_A		0x00400340	/* IO PIO Read Address Table Entry 7, Part A */
+
+#define		IIO_IPRTE0_B		0x00400348	/* IO PIO Read Address Table Entry 0, Part B */
+#define		IIO_IPRTE1_B		0x00400350	/* IO PIO Read Address Table Entry 1, Part B */
+#define		IIO_IPRTE2_B		0x00400358	/* IO PIO Read Address Table Entry 2, Part B */
+#define		IIO_IPRTE3_B		0x00400360	/* IO PIO Read Address Table Entry 3, Part B */
+#define		IIO_IPRTE4_B		0x00400368	/* IO PIO Read Address Table Entry 4, Part B */
+#define		IIO_IPRTE5_B		0x00400370	/* IO PIO Read Address Table Entry 5, Part B */
+#define		IIO_IPRTE6_B		0x00400378	/* IO PIO Read Address Table Entry 6, Part B */
+#define		IIO_IPRTE7_B		0x00400380	/* IO PIO Read Address Table Entry 7, Part B */
+
+#define		IIO_IPDR		0x00400388	/* IO PIO Deallocation Register */
+#define		IIO_ICDR		0x00400390	/* IO CRB Entry Deallocation Register */
+#define		IIO_IFDR		0x00400398	/* IO IOQ FIFO Depth Register */
+#define		IIO_IIAP		0x004003A0	/* IO IIQ Arbitration Parameters */
+#define		IIO_ICMR		0x004003A8	/* IO CRB Management Register */
+#define		IIO_ICCR		0x004003B0	/* IO CRB Control Register */
+#define		IIO_ICTO		0x004003B8	/* IO CRB Timeout   */
+#define		IIO_ICTP		0x004003C0	/* IO CRB Timeout Prescalar */
+
+#define		IIO_ICRB0_A		0x00400400	/* IO CRB Entry 0_A */
+#define		IIO_ICRB0_B		0x00400408	/* IO CRB Entry 0_B */
+#define		IIO_ICRB0_C		0x00400410	/* IO CRB Entry 0_C */
+#define		IIO_ICRB0_D		0x00400418	/* IO CRB Entry 0_D */
+#define		IIO_ICRB0_E		0x00400420	/* IO CRB Entry 0_E */
+
+#define		IIO_ICRB1_A		0x00400430	/* IO CRB Entry 1_A */
+#define		IIO_ICRB1_B		0x00400438	/* IO CRB Entry 1_B */
+#define		IIO_ICRB1_C		0x00400440	/* IO CRB Entry 1_C */
+#define		IIO_ICRB1_D		0x00400448	/* IO CRB Entry 1_D */
+#define		IIO_ICRB1_E		0x00400450	/* IO CRB Entry 1_E */
+
+#define		IIO_ICRB2_A		0x00400460	/* IO CRB Entry 2_A */
+#define		IIO_ICRB2_B		0x00400468	/* IO CRB Entry 2_B */
+#define		IIO_ICRB2_C		0x00400470	/* IO CRB Entry 2_C */
+#define		IIO_ICRB2_D		0x00400478	/* IO CRB Entry 2_D */
+#define		IIO_ICRB2_E		0x00400480	/* IO CRB Entry 2_E */
+
+#define		IIO_ICRB3_A		0x00400490	/* IO CRB Entry 3_A */
+#define		IIO_ICRB3_B		0x00400498	/* IO CRB Entry 3_B */
+#define		IIO_ICRB3_C		0x004004a0	/* IO CRB Entry 3_C */
+#define		IIO_ICRB3_D		0x004004a8	/* IO CRB Entry 3_D */
+#define		IIO_ICRB3_E		0x004004b0	/* IO CRB Entry 3_E */
+
+#define		IIO_ICRB4_A		0x004004c0	/* IO CRB Entry 4_A */
+#define		IIO_ICRB4_B		0x004004c8	/* IO CRB Entry 4_B */
+#define		IIO_ICRB4_C		0x004004d0	/* IO CRB Entry 4_C */
+#define		IIO_ICRB4_D		0x004004d8	/* IO CRB Entry 4_D */
+#define		IIO_ICRB4_E		0x004004e0	/* IO CRB Entry 4_E */
+
+#define		IIO_ICRB5_A		0x004004f0	/* IO CRB Entry 5_A */
+#define		IIO_ICRB5_B		0x004004f8	/* IO CRB Entry 5_B */
+#define		IIO_ICRB5_C		0x00400500	/* IO CRB Entry 5_C */
+#define		IIO_ICRB5_D		0x00400508	/* IO CRB Entry 5_D */
+#define		IIO_ICRB5_E		0x00400510	/* IO CRB Entry 5_E */
+
+#define		IIO_ICRB6_A		0x00400520	/* IO CRB Entry 6_A */
+#define		IIO_ICRB6_B		0x00400528	/* IO CRB Entry 6_B */
+#define		IIO_ICRB6_C		0x00400530	/* IO CRB Entry 6_C */
+#define		IIO_ICRB6_D		0x00400538	/* IO CRB Entry 6_D */
+#define		IIO_ICRB6_E		0x00400540	/* IO CRB Entry 6_E */
+
+#define		IIO_ICRB7_A		0x00400550	/* IO CRB Entry 7_A */
+#define		IIO_ICRB7_B		0x00400558	/* IO CRB Entry 7_B */
+#define		IIO_ICRB7_C		0x00400560	/* IO CRB Entry 7_C */
+#define		IIO_ICRB7_D		0x00400568	/* IO CRB Entry 7_D */
+#define		IIO_ICRB7_E		0x00400570	/* IO CRB Entry 7_E */
+
+#define		IIO_ICRB8_A		0x00400580	/* IO CRB Entry 8_A */
+#define		IIO_ICRB8_B		0x00400588	/* IO CRB Entry 8_B */
+#define		IIO_ICRB8_C		0x00400590	/* IO CRB Entry 8_C */
+#define		IIO_ICRB8_D		0x00400598	/* IO CRB Entry 8_D */
+#define		IIO_ICRB8_E		0x004005a0	/* IO CRB Entry 8_E */
+
+#define		IIO_ICRB9_A		0x004005b0	/* IO CRB Entry 9_A */
+#define		IIO_ICRB9_B		0x004005b8	/* IO CRB Entry 9_B */
+#define		IIO_ICRB9_C		0x004005c0	/* IO CRB Entry 9_C */
+#define		IIO_ICRB9_D		0x004005c8	/* IO CRB Entry 9_D */
+#define		IIO_ICRB9_E		0x004005d0	/* IO CRB Entry 9_E */
+
+#define		IIO_ICRBA_A		0x004005e0	/* IO CRB Entry A_A */
+#define		IIO_ICRBA_B		0x004005e8	/* IO CRB Entry A_B */
+#define		IIO_ICRBA_C		0x004005f0	/* IO CRB Entry A_C */
+#define		IIO_ICRBA_D		0x004005f8	/* IO CRB Entry A_D */
+#define		IIO_ICRBA_E		0x00400600	/* IO CRB Entry A_E */
+
+#define		IIO_ICRBB_A		0x00400610	/* IO CRB Entry B_A */
+#define		IIO_ICRBB_B		0x00400618	/* IO CRB Entry B_B */
+#define		IIO_ICRBB_C		0x00400620	/* IO CRB Entry B_C */
+#define		IIO_ICRBB_D		0x00400628	/* IO CRB Entry B_D */
+#define		IIO_ICRBB_E		0x00400630	/* IO CRB Entry B_E */
+
+#define		IIO_ICRBC_A		0x00400640	/* IO CRB Entry C_A */
+#define		IIO_ICRBC_B		0x00400648	/* IO CRB Entry C_B */
+#define		IIO_ICRBC_C		0x00400650	/* IO CRB Entry C_C */
+#define		IIO_ICRBC_D		0x00400658	/* IO CRB Entry C_D */
+#define		IIO_ICRBC_E		0x00400660	/* IO CRB Entry C_E */
+
+#define		IIO_ICRBD_A		0x00400670	/* IO CRB Entry D_A */
+#define		IIO_ICRBD_B		0x00400678	/* IO CRB Entry D_B */
+#define		IIO_ICRBD_C		0x00400680	/* IO CRB Entry D_C */
+#define		IIO_ICRBD_D		0x00400688	/* IO CRB Entry D_D */
+#define		IIO_ICRBD_E		0x00400690	/* IO CRB Entry D_E */
+
+#define		IIO_ICRBE_A		0x004006a0	/* IO CRB Entry E_A */
+#define		IIO_ICRBE_B		0x004006a8	/* IO CRB Entry E_B */
+#define		IIO_ICRBE_C		0x004006b0	/* IO CRB Entry E_C */
+#define		IIO_ICRBE_D		0x004006b8	/* IO CRB Entry E_D */
+#define		IIO_ICRBE_E		0x004006c0	/* IO CRB Entry E_E */
+
+#define		IIO_ICSML		0x00400700	/* IO CRB Spurious Message Low */
+#define		IIO_ICSMM		0x00400708	/* IO CRB Spurious Message Middle */
+#define		IIO_ICSMH		0x00400710	/* IO CRB Spurious Message High */
+
+#define		IIO_IDBSS		0x00400718	/* IO Debug Submenu Select */
+
+#define		IIO_IBLS0		0x00410000	/* IO BTE Length Status 0 */
+#define		IIO_IBSA0		0x00410008	/* IO BTE Source Address 0 */
+#define		IIO_IBDA0		0x00410010	/* IO BTE Destination Address 0 */
+#define		IIO_IBCT0		0x00410018	/* IO BTE Control Terminate 0 */
+#define		IIO_IBNA0		0x00410020	/* IO BTE Notification Address 0 */
+#define		IIO_IBIA0		0x00410028	/* IO BTE Interrupt Address 0 */
+#define		IIO_IBLS1		0x00420000	/* IO BTE Length Status 1 */
+#define		IIO_IBSA1		0x00420008	/* IO BTE Source Address 1 */
+#define		IIO_IBDA1		0x00420010	/* IO BTE Destination Address 1 */
+#define		IIO_IBCT1		0x00420018	/* IO BTE Control Terminate 1 */
+#define		IIO_IBNA1		0x00420020	/* IO BTE Notification Address 1 */
+#define		IIO_IBIA1		0x00420028	/* IO BTE Interrupt Address 1 */
+
+#define		IIO_IPCR		0x00430000	/* IO Performance Control */
+#define		IIO_IPPR		0x00430008	/* IO Performance Profiling */
+
+/************************************************************************
+ *									*
+ * Description:  This register echoes some information from the         *
+ * LB_REV_ID register. It is available through Crosstalk as described   *
+ * above. The REV_NUM and MFG_NUM fields receive their values from      *
+ * the REVISION and MANUFACTURER fields in the LB_REV_ID register.      *
+ * The PART_NUM field's value is the Crosstalk device ID number that    *
+ * Steve Miller assigned to the SHub chip.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_wid_u {
+	u64 ii_wid_regval;
+	struct {
+		u64 w_rsvd_1:1;
+		u64 w_mfg_num:11;
+		u64 w_part_num:16;
+		u64 w_rev_num:4;
+		u64 w_rsvd:32;
+	} ii_wid_fld_s;
+} ii_wid_u_t;
+
+/************************************************************************
+ *									*
+ *  The fields in this register are set upon detection of an error      *
+ * and cleared by various mechanisms, as explained in the               *
+ * description.                                                         *
+ *									*
+ ************************************************************************/
+
+typedef union ii_wstat_u {
+	u64 ii_wstat_regval;
+	struct {
+		u64 w_pending:4;
+		u64 w_xt_crd_to:1;
+		u64 w_xt_tail_to:1;
+		u64 w_rsvd_3:3;
+		u64 w_tx_mx_rty:1;
+		u64 w_rsvd_2:6;
+		u64 w_llp_tx_cnt:8;
+		u64 w_rsvd_1:8;
+		u64 w_crazy:1;
+		u64 w_rsvd:31;
+	} ii_wstat_fld_s;
+} ii_wstat_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This is a read-write enabled register. It controls     *
+ * various aspects of the Crosstalk flow control.                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_wcr_u {
+	u64 ii_wcr_regval;
+	struct {
+		u64 w_wid:4;
+		u64 w_tag:1;
+		u64 w_rsvd_1:8;
+		u64 w_dst_crd:3;
+		u64 w_f_bad_pkt:1;
+		u64 w_dir_con:1;
+		u64 w_e_thresh:5;
+		u64 w_rsvd:41;
+	} ii_wcr_fld_s;
+} ii_wcr_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register's value is a bit vector that guards      *
+ * access to local registers within the II as well as to external       *
+ * Crosstalk widgets. Each bit in the register corresponds to a         *
+ * particular region in the system; a region consists of one, two or    *
+ * four nodes (depending on the value of the REGION_SIZE field in the   *
+ * LB_REV_ID register, which is documented in Section 8.3.1.1). The     *
+ * protection provided by this register applies to PIO read             *
+ * operations as well as PIO write operations. The II will perform a    *
+ * PIO read or write request only if the bit for the requestor's        *
+ * region is set; otherwise, the II will not perform the requested      *
+ * operation and will return an error response. When a PIO read or      *
+ * write request targets an external Crosstalk widget, then not only    *
+ * must the bit for the requestor's region be set in the ILAPR, but     *
+ * also the target widget's bit in the IOWA register must be set in     *
+ * order for the II to perform the requested operation; otherwise,      *
+ * the II will return an error response. Hence, the protection          *
+ * provided by the IOWA register supplements the protection provided    *
+ * by the ILAPR for requests that target external Crosstalk widgets.    *
+ * This register itself can be accessed only by the nodes whose         *
+ * region ID bits are enabled in this same register. It can also be     *
+ * accessed through the IAlias space by the local processors.           *
+ * The reset value of this register allows access by all nodes.         *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ilapr_u {
+	u64 ii_ilapr_regval;
+	struct {
+		u64 i_region:64;
+	} ii_ilapr_fld_s;
+} ii_ilapr_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  A write to this register of the 64-bit value           *
+ * "SGIrules" in ASCII, will cause the bit in the ILAPR register        *
+ * corresponding to the region of the requestor to be set (allow        *
+ * access). A write of any other value will be ignored. Access          *
+ * protection for this register is "SGIrules".                          *
+ * This register can also be accessed through the IAlias space.         *
+ * However, this access will not change the access permissions in the   *
+ * ILAPR.                                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ilapo_u {
+	u64 ii_ilapo_regval;
+	struct {
+		u64 i_io_ovrride:64;
+	} ii_ilapo_fld_s;
+} ii_ilapo_u_t;
+
+/************************************************************************
+ *									*
+ *  This register qualifies all the PIO and Graphics writes launched    *
+ * from the SHUB towards a widget.                                      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iowa_u {
+	u64 ii_iowa_regval;
+	struct {
+		u64 i_w0_oac:1;
+		u64 i_rsvd_1:7;
+		u64 i_wx_oac:8;
+		u64 i_rsvd:48;
+	} ii_iowa_fld_s;
+} ii_iowa_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register qualifies all the requests launched      *
+ * from a widget towards the Shub. This register is intended to be      *
+ * used by software in case of misbehaving widgets.                     *
+ *									*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iiwa_u {
+	u64 ii_iiwa_regval;
+	struct {
+		u64 i_w0_iac:1;
+		u64 i_rsvd_1:7;
+		u64 i_wx_iac:8;
+		u64 i_rsvd:48;
+	} ii_iiwa_fld_s;
+} ii_iiwa_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register qualifies all the operations launched    *
+ * from a widget towards the SHub. It allows individual access          *
+ * control for up to 8 devices per widget. A device refers to           *
+ * individual DMA master hosted by a widget.                            *
+ * The bits in each field of this register are cleared by the Shub      *
+ * upon detection of an error which requires the device to be           *
+ * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric    *
+ * Crosstalk). Whether or not a device has access rights to this        *
+ * Shub is determined by an AND of the device enable bit in the         *
+ * appropriate field of this register and the corresponding bit in      *
+ * the Wx_IAC field (for the widget which this device belongs to).      *
+ * The bits in this field are set by writing a 1 to them. Incoming      *
+ * replies from Crosstalk are not subject to this access control        *
+ * mechanism.                                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iidem_u {
+	u64 ii_iidem_regval;
+	struct {
+		u64 i_w8_dxs:8;
+		u64 i_w9_dxs:8;
+		u64 i_wa_dxs:8;
+		u64 i_wb_dxs:8;
+		u64 i_wc_dxs:8;
+		u64 i_wd_dxs:8;
+		u64 i_we_dxs:8;
+		u64 i_wf_dxs:8;
+	} ii_iidem_fld_s;
+} ii_iidem_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the various programmable fields necessary    *
+ * for controlling and observing the LLP signals.                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ilcsr_u {
+	u64 ii_ilcsr_regval;
+	struct {
+		u64 i_nullto:6;
+		u64 i_rsvd_4:2;
+		u64 i_wrmrst:1;
+		u64 i_rsvd_3:1;
+		u64 i_llp_en:1;
+		u64 i_bm8:1;
+		u64 i_llp_stat:2;
+		u64 i_remote_power:1;
+		u64 i_rsvd_2:1;
+		u64 i_maxrtry:10;
+		u64 i_d_avail_sel:2;
+		u64 i_rsvd_1:4;
+		u64 i_maxbrst:10;
+		u64 i_rsvd:22;
+
+	} ii_ilcsr_fld_s;
+} ii_ilcsr_u_t;
+
+/************************************************************************
+ *									*
+ *  This is simply a status registers that monitors the LLP error       *
+ * rate.								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_illr_u {
+	u64 ii_illr_regval;
+	struct {
+		u64 i_sn_cnt:16;
+		u64 i_cb_cnt:16;
+		u64 i_rsvd:32;
+	} ii_illr_fld_s;
+} ii_illr_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  All II-detected non-BTE error interrupts are           *
+ * specified via this register.                                         *
+ * NOTE: The PI interrupt register address is hardcoded in the II. If   *
+ * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI      *
+ * packet) to address offset 0x0180_0090 within the local register      *
+ * address space of PI0 on the node specified by the NODE field. If     *
+ * PI_ID==1, then the II sends the interrupt request to address         *
+ * offset 0x01A0_0090 within the local register address space of PI1    *
+ * on the node specified by the NODE field.                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iidsr_u {
+	u64 ii_iidsr_regval;
+	struct {
+		u64 i_level:8;
+		u64 i_pi_id:1;
+		u64 i_node:11;
+		u64 i_rsvd_3:4;
+		u64 i_enable:1;
+		u64 i_rsvd_2:3;
+		u64 i_int_sent:2;
+		u64 i_rsvd_1:2;
+		u64 i_pi0_forward_int:1;
+		u64 i_pi1_forward_int:1;
+		u64 i_rsvd:30;
+	} ii_iidsr_fld_s;
+} ii_iidsr_u_t;
+
+/************************************************************************
+ *									*
+ *  There are two instances of this register. This register is used     *
+ * for matching up the incoming responses from the graphics widget to   *
+ * the processor that initiated the graphics operation. The             *
+ * write-responses are converted to graphics credits and returned to    *
+ * the processor so that the processor interface can manage the flow    *
+ * control.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_igfx0_u {
+	u64 ii_igfx0_regval;
+	struct {
+		u64 i_w_num:4;
+		u64 i_pi_id:1;
+		u64 i_n_num:12;
+		u64 i_p_num:1;
+		u64 i_rsvd:46;
+	} ii_igfx0_fld_s;
+} ii_igfx0_u_t;
+
+/************************************************************************
+ *									*
+ *  There are two instances of this register. This register is used     *
+ * for matching up the incoming responses from the graphics widget to   *
+ * the processor that initiated the graphics operation. The             *
+ * write-responses are converted to graphics credits and returned to    *
+ * the processor so that the processor interface can manage the flow    *
+ * control.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_igfx1_u {
+	u64 ii_igfx1_regval;
+	struct {
+		u64 i_w_num:4;
+		u64 i_pi_id:1;
+		u64 i_n_num:12;
+		u64 i_p_num:1;
+		u64 i_rsvd:46;
+	} ii_igfx1_fld_s;
+} ii_igfx1_u_t;
+
+/************************************************************************
+ *									*
+ *  There are two instances of this registers. These registers are      *
+ * used as scratch registers for software use.                          *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iscr0_u {
+	u64 ii_iscr0_regval;
+	struct {
+		u64 i_scratch:64;
+	} ii_iscr0_fld_s;
+} ii_iscr0_u_t;
+
+/************************************************************************
+ *									*
+ *  There are two instances of this registers. These registers are      *
+ * used as scratch registers for software use.                          *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iscr1_u {
+	u64 ii_iscr1_regval;
+	struct {
+		u64 i_scratch:64;
+	} ii_iscr1_fld_s;
+} ii_iscr1_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the SHub is thus the lower 16 GBytes per widget       * 
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte1_u {
+	u64 ii_itte1_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte1_fld_s;
+} ii_itte1_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte2_u {
+	u64 ii_itte2_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte2_fld_s;
+} ii_itte2_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte3_u {
+	u64 ii_itte3_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte3_fld_s;
+} ii_itte3_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a SHub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the SHub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte4_u {
+	u64 ii_itte4_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte4_fld_s;
+} ii_itte4_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a SHub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte5_u {
+	u64 ii_itte5_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte5_fld_s;
+} ii_itte5_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte6_u {
+	u64 ii_itte6_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte6_fld_s;
+} ii_itte6_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte7_u {
+	u64 ii_itte7_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte7_fld_s;
+} ii_itte7_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprb0_u {
+	u64 ii_iprb0_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprb0_fld_s;
+} ii_iprb0_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprb8_u {
+	u64 ii_iprb8_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprb8_fld_s;
+} ii_iprb8_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprb9_u {
+	u64 ii_iprb9_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprb9_fld_s;
+} ii_iprb9_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.        *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ *									*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprba_u {
+	u64 ii_iprba_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprba_fld_s;
+} ii_iprba_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbb_u {
+	u64 ii_iprbb_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbb_fld_s;
+} ii_iprbb_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbc_u {
+	u64 ii_iprbc_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbc_fld_s;
+} ii_iprbc_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbd_u {
+	u64 ii_iprbd_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbd_fld_s;
+} ii_iprbd_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbe_u {
+	u64 ii_iprbe_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbe_fld_s;
+} ii_iprbe_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of Shub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbf_u {
+	u64 ii_iprbf_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbe_fld_s;
+} ii_iprbf_u_t;
+
+/************************************************************************
+ *									*
+ *  This register specifies the timeout value to use for monitoring     *
+ * Crosstalk credits which are used outbound to Crosstalk. An           *
+ * internal counter called the Crosstalk Credit Timeout Counter         *
+ * increments every 128 II clocks. The counter starts counting          *
+ * anytime the credit count drops below a threshold, and resets to      *
+ * zero (stops counting) anytime the credit count is at or above the    *
+ * threshold. The threshold is 1 credit in direct connect mode and 2    *
+ * in Crossbow connect mode. When the internal Crosstalk Credit         *
+ * Timeout Counter reaches the value programmed in this register, a     *
+ * Crosstalk Credit Timeout has occurred. The internal counter is not   *
+ * readable from software, and stops counting at its maximum value,     *
+ * so it cannot cause more than one interrupt.                          *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ixcc_u {
+	u64 ii_ixcc_regval;
+	struct {
+		u64 i_time_out:26;
+		u64 i_rsvd:38;
+	} ii_ixcc_fld_s;
+} ii_ixcc_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register qualifies all the PIO and DMA            *
+ * operations launched from widget 0 towards the SHub. In               *
+ * addition, it also qualifies accesses by the BTE streams.             *
+ * The bits in each field of this register are cleared by the SHub      *
+ * upon detection of an error which requires widget 0 or the BTE        *
+ * streams to be terminated. Whether or not widget x has access         *
+ * rights to this SHub is determined by an AND of the device            *
+ * enable bit in the appropriate field of this register and bit 0 in    *
+ * the Wx_IAC field. The bits in this field are set by writing a 1 to   *
+ * them. Incoming replies from Crosstalk are not subject to this        *
+ * access control mechanism.                                            *
+ *									*
+ ************************************************************************/
+
+typedef union ii_imem_u {
+	u64 ii_imem_regval;
+	struct {
+		u64 i_w0_esd:1;
+		u64 i_rsvd_3:3;
+		u64 i_b0_esd:1;
+		u64 i_rsvd_2:3;
+		u64 i_b1_esd:1;
+		u64 i_rsvd_1:3;
+		u64 i_clr_precise:1;
+		u64 i_rsvd:51;
+	} ii_imem_fld_s;
+} ii_imem_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register specifies the timeout value to use for   *
+ * monitoring Crosstalk tail flits coming into the Shub in the          *
+ * TAIL_TO field. An internal counter associated with this register     *
+ * is incremented every 128 II internal clocks (7 bits). The counter    *
+ * starts counting anytime a header micropacket is received and stops   *
+ * counting (and resets to zero) any time a micropacket with a Tail     *
+ * bit is received. Once the counter reaches the threshold value        *
+ * programmed in this register, it generates an interrupt to the        *
+ * processor that is programmed into the IIDSR. The counter saturates   *
+ * (does not roll over) at its maximum value, so it cannot cause        *
+ * another interrupt until after it is cleared.                         *
+ * The register also contains the Read Response Timeout values. The     *
+ * Prescalar is 23 bits, and counts II clocks. An internal counter      *
+ * increments on every II clock and when it reaches the value in the    *
+ * Prescalar field, all IPRTE registers with their valid bits set       *
+ * have their Read Response timers bumped. Whenever any of them match   *
+ * the value in the RRSP_TO field, a Read Response Timeout has          *
+ * occurred, and error handling occurs as described in the Error        *
+ * Handling section of this document.                                   *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ixtt_u {
+	u64 ii_ixtt_regval;
+	struct {
+		u64 i_tail_to:26;
+		u64 i_rsvd_1:6;
+		u64 i_rrsp_ps:23;
+		u64 i_rrsp_to:5;
+		u64 i_rsvd:4;
+	} ii_ixtt_fld_s;
+} ii_ixtt_u_t;
+
+/************************************************************************
+ *									*
+ *  Writing a 1 to the fields of this register clears the appropriate   *
+ * error bits in other areas of SHub. Note that when the                *
+ * E_PRB_x bits are used to clear error bits in PRB registers,          *
+ * SPUR_RD and SPUR_WR may persist, because they require additional     *
+ * action to clear them. See the IPRBx and IXSS Register                *
+ * specifications.                                                      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ieclr_u {
+	u64 ii_ieclr_regval;
+	struct {
+		u64 i_e_prb_0:1;
+		u64 i_rsvd:7;
+		u64 i_e_prb_8:1;
+		u64 i_e_prb_9:1;
+		u64 i_e_prb_a:1;
+		u64 i_e_prb_b:1;
+		u64 i_e_prb_c:1;
+		u64 i_e_prb_d:1;
+		u64 i_e_prb_e:1;
+		u64 i_e_prb_f:1;
+		u64 i_e_crazy:1;
+		u64 i_e_bte_0:1;
+		u64 i_e_bte_1:1;
+		u64 i_reserved_1:10;
+		u64 i_spur_rd_hdr:1;
+		u64 i_cam_intr_to:1;
+		u64 i_cam_overflow:1;
+		u64 i_cam_read_miss:1;
+		u64 i_ioq_rep_underflow:1;
+		u64 i_ioq_req_underflow:1;
+		u64 i_ioq_rep_overflow:1;
+		u64 i_ioq_req_overflow:1;
+		u64 i_iiq_rep_overflow:1;
+		u64 i_iiq_req_overflow:1;
+		u64 i_ii_xn_rep_cred_overflow:1;
+		u64 i_ii_xn_req_cred_overflow:1;
+		u64 i_ii_xn_invalid_cmd:1;
+		u64 i_xn_ii_invalid_cmd:1;
+		u64 i_reserved_2:21;
+	} ii_ieclr_fld_s;
+} ii_ieclr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register controls both BTEs. SOFT_RESET is intended for        *
+ * recovery after an error. COUNT controls the total number of CRBs     *
+ * that both BTEs (combined) can use, which affects total BTE           *
+ * bandwidth.                                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibcr_u {
+	u64 ii_ibcr_regval;
+	struct {
+		u64 i_count:4;
+		u64 i_rsvd_1:4;
+		u64 i_soft_reset:1;
+		u64 i_rsvd:55;
+	} ii_ibcr_fld_s;
+} ii_ibcr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the header of a spurious read response       *
+ * received from Crosstalk. A spurious read response is defined as a    *
+ * read response received by II from a widget for which (1) the SIDN    *
+ * has a value between 1 and 7, inclusive (II never sends requests to   *
+ * these widgets (2) there is no valid IPRTE register which             *
+ * corresponds to the TNUM, or (3) the widget indicated in SIDN is      *
+ * not the same as the widget recorded in the IPRTE register            *
+ * referenced by the TNUM. If this condition is true, and if the        *
+ * IXSS[VALID] bit is clear, then the header of the spurious read       *
+ * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The    *
+ * errant header is thereby captured, and no further spurious read      *
+ * respones are captured until IXSS[VALID] is cleared by setting the    *
+ * appropriate bit in IECLR.Everytime a spurious read response is       *
+ * detected, the SPUR_RD bit of the PRB corresponding to the incoming   *
+ * message's SIDN field is set. This always happens, regarless of       *
+ * whether a header is captured. The programmer should check            *
+ * IXSM[SIDN] to determine which widget sent the spurious response,     *
+ * because there may be more than one SPUR_RD bit set in the PRB        *
+ * registers. The widget indicated by IXSM[SIDN] was the first          *
+ * spurious read response to be received since the last time            *
+ * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB      *
+ * will be set. Any SPUR_RD bits in any other PRB registers indicate    *
+ * spurious messages from other widets which were detected after the    *
+ * header was captured..                                                *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ixsm_u {
+	u64 ii_ixsm_regval;
+	struct {
+		u64 i_byte_en:32;
+		u64 i_reserved:1;
+		u64 i_tag:3;
+		u64 i_alt_pactyp:4;
+		u64 i_bo:1;
+		u64 i_error:1;
+		u64 i_vbpm:1;
+		u64 i_gbr:1;
+		u64 i_ds:2;
+		u64 i_ct:1;
+		u64 i_tnum:5;
+		u64 i_pactyp:4;
+		u64 i_sidn:4;
+		u64 i_didn:4;
+	} ii_ixsm_fld_s;
+} ii_ixsm_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the sideband bits of a spurious read         *
+ * response received from Crosstalk.                                    *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ixss_u {
+	u64 ii_ixss_regval;
+	struct {
+		u64 i_sideband:8;
+		u64 i_rsvd:55;
+		u64 i_valid:1;
+	} ii_ixss_fld_s;
+} ii_ixss_u_t;
+
+/************************************************************************
+ *									*
+ *  This register enables software to access the II LLP's test port.    *
+ * Refer to the LLP 2.5 documentation for an explanation of the test    *
+ * port. Software can write to this register to program the values      *
+ * for the control fields (TestErrCapture, TestClear, TestFlit,         *
+ * TestMask and TestSeed). Similarly, software can read from this       *
+ * register to obtain the values of the test port's status outputs      *
+ * (TestCBerr, TestValid and TestData).                                 *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ilct_u {
+	u64 ii_ilct_regval;
+	struct {
+		u64 i_test_seed:20;
+		u64 i_test_mask:8;
+		u64 i_test_data:20;
+		u64 i_test_valid:1;
+		u64 i_test_cberr:1;
+		u64 i_test_flit:3;
+		u64 i_test_clear:1;
+		u64 i_test_err_capture:1;
+		u64 i_rsvd:9;
+	} ii_ilct_fld_s;
+} ii_ilct_u_t;
+
+/************************************************************************
+ *									*
+ *  If the II detects an illegal incoming Duplonet packet (request or   *
+ * reply) when VALID==0 in the IIEPH1 register, then it saves the       *
+ * contents of the packet's header flit in the IIEPH1 and IIEPH2        *
+ * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit,     *
+ * and assigns a value to the ERR_TYPE field which indicates the        *
+ * specific nature of the error. The II recognizes four different       *
+ * types of errors: short request packets (ERR_TYPE==2), short reply    *
+ * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long   *
+ * reply packets (ERR_TYPE==5). The encodings for these types of        *
+ * errors were chosen to be consistent with the same types of errors    *
+ * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in    *
+ * the LB unit). If the II detects an illegal incoming Duplonet         *
+ * packet when VALID==1 in the IIEPH1 register, then it merely sets     *
+ * the OVERRUN bit to indicate that a subsequent error has happened,    *
+ * and does nothing further.                                            *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iieph1_u {
+	u64 ii_iieph1_regval;
+	struct {
+		u64 i_command:7;
+		u64 i_rsvd_5:1;
+		u64 i_suppl:14;
+		u64 i_rsvd_4:1;
+		u64 i_source:14;
+		u64 i_rsvd_3:1;
+		u64 i_err_type:4;
+		u64 i_rsvd_2:4;
+		u64 i_overrun:1;
+		u64 i_rsvd_1:3;
+		u64 i_valid:1;
+		u64 i_rsvd:13;
+	} ii_iieph1_fld_s;
+} ii_iieph1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register holds the Address field from the header flit of an    *
+ * incoming erroneous Duplonet packet, along with the tail bit which    *
+ * accompanied this header flit. This register is essentially an        *
+ * extension of IIEPH1. Two registers were necessary because the 64     *
+ * bits available in only a single register were insufficient to        *
+ * capture the entire header flit of an erroneous packet.               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iieph2_u {
+	u64 ii_iieph2_regval;
+	struct {
+		u64 i_rsvd_0:3;
+		u64 i_address:47;
+		u64 i_rsvd_1:10;
+		u64 i_tail:1;
+		u64 i_rsvd:3;
+	} ii_iieph2_fld_s;
+} ii_iieph2_u_t;
+
+/******************************/
+
+/************************************************************************
+ *									*
+ *  This register's value is a bit vector that guards access from SXBs  *
+ * to local registers within the II as well as to external Crosstalk    *
+ * widgets								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_islapr_u {
+	u64 ii_islapr_regval;
+	struct {
+		u64 i_region:64;
+	} ii_islapr_fld_s;
+} ii_islapr_u_t;
+
+/************************************************************************
+ *									*
+ *  A write to this register of the 56-bit value "Pup+Bun" will cause	*
+ * the bit in the ISLAPR register corresponding to the region of the	*
+ * requestor to be set (access allowed).				(
+ *									*
+ ************************************************************************/
+
+typedef union ii_islapo_u {
+	u64 ii_islapo_regval;
+	struct {
+		u64 i_io_sbx_ovrride:56;
+		u64 i_rsvd:8;
+	} ii_islapo_fld_s;
+} ii_islapo_u_t;
+
+/************************************************************************
+ *									*
+ *  Determines how long the wrapper will wait aftr an interrupt is	*
+ * initially issued from the II before it times out the outstanding	*
+ * interrupt and drops it from the interrupt queue.			* 
+ *									*
+ ************************************************************************/
+
+typedef union ii_iwi_u {
+	u64 ii_iwi_regval;
+	struct {
+		u64 i_prescale:24;
+		u64 i_rsvd:8;
+		u64 i_timeout:8;
+		u64 i_rsvd1:8;
+		u64 i_intrpt_retry_period:8;
+		u64 i_rsvd2:8;
+	} ii_iwi_fld_s;
+} ii_iwi_u_t;
+
+/************************************************************************
+ *									*
+ *  Log errors which have occurred in the II wrapper. The errors are	*
+ * cleared by writing to the IECLR register.				* 
+ *									*
+ ************************************************************************/
+
+typedef union ii_iwel_u {
+	u64 ii_iwel_regval;
+	struct {
+		u64 i_intr_timed_out:1;
+		u64 i_rsvd:7;
+		u64 i_cam_overflow:1;
+		u64 i_cam_read_miss:1;
+		u64 i_rsvd1:2;
+		u64 i_ioq_rep_underflow:1;
+		u64 i_ioq_req_underflow:1;
+		u64 i_ioq_rep_overflow:1;
+		u64 i_ioq_req_overflow:1;
+		u64 i_iiq_rep_overflow:1;
+		u64 i_iiq_req_overflow:1;
+		u64 i_rsvd2:6;
+		u64 i_ii_xn_rep_cred_over_under:1;
+		u64 i_ii_xn_req_cred_over_under:1;
+		u64 i_rsvd3:6;
+		u64 i_ii_xn_invalid_cmd:1;
+		u64 i_xn_ii_invalid_cmd:1;
+		u64 i_rsvd4:30;
+	} ii_iwel_fld_s;
+} ii_iwel_u_t;
+
+/************************************************************************
+ *									*
+ *  Controls the II wrapper.						* 
+ *									*
+ ************************************************************************/
+
+typedef union ii_iwc_u {
+	u64 ii_iwc_regval;
+	struct {
+		u64 i_dma_byte_swap:1;
+		u64 i_rsvd:3;
+		u64 i_cam_read_lines_reset:1;
+		u64 i_rsvd1:3;
+		u64 i_ii_xn_cred_over_under_log:1;
+		u64 i_rsvd2:19;
+		u64 i_xn_rep_iq_depth:5;
+		u64 i_rsvd3:3;
+		u64 i_xn_req_iq_depth:5;
+		u64 i_rsvd4:3;
+		u64 i_iiq_depth:6;
+		u64 i_rsvd5:12;
+		u64 i_force_rep_cred:1;
+		u64 i_force_req_cred:1;
+	} ii_iwc_fld_s;
+} ii_iwc_u_t;
+
+/************************************************************************
+ *									*
+ *  Status in the II wrapper.						* 
+ *									*
+ ************************************************************************/
+
+typedef union ii_iws_u {
+	u64 ii_iws_regval;
+	struct {
+		u64 i_xn_rep_iq_credits:5;
+		u64 i_rsvd:3;
+		u64 i_xn_req_iq_credits:5;
+		u64 i_rsvd1:51;
+	} ii_iws_fld_s;
+} ii_iws_u_t;
+
+/************************************************************************
+ *									*
+ *  Masks errors in the IWEL register.					*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iweim_u {
+	u64 ii_iweim_regval;
+	struct {
+		u64 i_intr_timed_out:1;
+		u64 i_rsvd:7;
+		u64 i_cam_overflow:1;
+		u64 i_cam_read_miss:1;
+		u64 i_rsvd1:2;
+		u64 i_ioq_rep_underflow:1;
+		u64 i_ioq_req_underflow:1;
+		u64 i_ioq_rep_overflow:1;
+		u64 i_ioq_req_overflow:1;
+		u64 i_iiq_rep_overflow:1;
+		u64 i_iiq_req_overflow:1;
+		u64 i_rsvd2:6;
+		u64 i_ii_xn_rep_cred_overflow:1;
+		u64 i_ii_xn_req_cred_overflow:1;
+		u64 i_rsvd3:6;
+		u64 i_ii_xn_invalid_cmd:1;
+		u64 i_xn_ii_invalid_cmd:1;
+		u64 i_rsvd4:30;
+	} ii_iweim_fld_s;
+} ii_iweim_u_t;
+
+/************************************************************************
+ *									*
+ *  A write to this register causes a particular field in the           *
+ * corresponding widget's PRB entry to be adjusted up or down by 1.     *
+ * This counter should be used when recovering from error and reset     *
+ * conditions. Note that software would be capable of causing           *
+ * inadvertent overflow or underflow of these counters.                 *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ipca_u {
+	u64 ii_ipca_regval;
+	struct {
+		u64 i_wid:4;
+		u64 i_adjust:1;
+		u64 i_rsvd_1:3;
+		u64 i_field:2;
+		u64 i_rsvd:54;
+	} ii_ipca_fld_s;
+} ii_ipca_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte0a_u {
+	u64 ii_iprte0a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte0a_fld_s;
+} ii_iprte0a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte1a_u {
+	u64 ii_iprte1a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte1a_fld_s;
+} ii_iprte1a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte2a_u {
+	u64 ii_iprte2a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte2a_fld_s;
+} ii_iprte2a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte3a_u {
+	u64 ii_iprte3a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte3a_fld_s;
+} ii_iprte3a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte4a_u {
+	u64 ii_iprte4a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte4a_fld_s;
+} ii_iprte4a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte5a_u {
+	u64 ii_iprte5a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte5a_fld_s;
+} ii_iprte5a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte6a_u {
+	u64 ii_iprte6a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte6a_fld_s;
+} ii_iprte6a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte7a_u {
+	u64 ii_iprte7a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprtea7_fld_s;
+} ii_iprte7a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte0b_u {
+	u64 ii_iprte0b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte0b_fld_s;
+} ii_iprte0b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte1b_u {
+	u64 ii_iprte1b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte1b_fld_s;
+} ii_iprte1b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte2b_u {
+	u64 ii_iprte2b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte2b_fld_s;
+} ii_iprte2b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte3b_u {
+	u64 ii_iprte3b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte3b_fld_s;
+} ii_iprte3b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte4b_u {
+	u64 ii_iprte4b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte4b_fld_s;
+} ii_iprte4b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte5b_u {
+	u64 ii_iprte5b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte5b_fld_s;
+} ii_iprte5b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte6b_u {
+	u64 ii_iprte6b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+
+	} ii_iprte6b_fld_s;
+} ii_iprte6b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte7b_u {
+	u64 ii_iprte7b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte7b_fld_s;
+} ii_iprte7b_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  SHub II contains a feature which did not exist in      *
+ * the Hub which automatically cleans up after a Read Response          *
+ * timeout, including deallocation of the IPRTE and recovery of IBuf    *
+ * space. The inclusion of this register in SHub is for backward        *
+ * compatibility                                                        *
+ * A write to this register causes an entry from the table of           *
+ * outstanding PIO Read Requests to be freed and returned to the        *
+ * stack of free entries. This register is used in handling the         *
+ * timeout errors that result in a PIO Reply never returning from       *
+ * Crosstalk.                                                           *
+ * Note that this register does not affect the contents of the IPRTE    *
+ * registers. The Valid bits in those registers have to be              *
+ * specifically turned off by software.                                 *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ipdr_u {
+	u64 ii_ipdr_regval;
+	struct {
+		u64 i_te:3;
+		u64 i_rsvd_1:1;
+		u64 i_pnd:1;
+		u64 i_init_rpcnt:1;
+		u64 i_rsvd:58;
+	} ii_ipdr_fld_s;
+} ii_ipdr_u_t;
+
+/************************************************************************
+ *									*
+ *  A write to this register causes a CRB entry to be returned to the   *
+ * queue of free CRBs. The entry should have previously been cleared    *
+ * (mark bit) via backdoor access to the pertinent CRB entry. This      *
+ * register is used in the last step of handling the errors that are    *
+ * captured and marked in CRB entries.  Briefly: 1) first error for     *
+ * DMA write from a particular device, and first error for a            *
+ * particular BTE stream, lead to a marked CRB entry, and processor     *
+ * interrupt, 2) software reads the error information captured in the   *
+ * CRB entry, and presumably takes some corrective action, 3)           *
+ * software clears the mark bit, and finally 4) software writes to      *
+ * the ICDR register to return the CRB entry to the list of free CRB    *
+ * entries.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icdr_u {
+	u64 ii_icdr_regval;
+	struct {
+		u64 i_crb_num:4;
+		u64 i_pnd:1;
+		u64 i_rsvd:59;
+	} ii_icdr_fld_s;
+} ii_icdr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register provides debug access to two FIFOs inside of II.      *
+ * Both IOQ_MAX* fields of this register contain the instantaneous      *
+ * depth (in units of the number of available entries) of the           *
+ * associated IOQ FIFO.  A read of this register will return the        *
+ * number of free entries on each FIFO at the time of the read.  So     *
+ * when a FIFO is idle, the associated field contains the maximum       *
+ * depth of the FIFO.  This register is writable for debug reasons      *
+ * and is intended to be written with the maximum desired FIFO depth    *
+ * while the FIFO is idle. Software must assure that II is idle when    *
+ * this register is written. If there are any active entries in any     *
+ * of these FIFOs when this register is written, the results are        *
+ * undefined.                                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ifdr_u {
+	u64 ii_ifdr_regval;
+	struct {
+		u64 i_ioq_max_rq:7;
+		u64 i_set_ioq_rq:1;
+		u64 i_ioq_max_rp:7;
+		u64 i_set_ioq_rp:1;
+		u64 i_rsvd:48;
+	} ii_ifdr_fld_s;
+} ii_ifdr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows the II to become sluggish in removing          *
+ * messages from its inbound queue (IIQ). This will cause messages to   *
+ * back up in either virtual channel. Disabling the "molasses" mode     *
+ * subsequently allows the II to be tested under stress. In the         *
+ * sluggish ("Molasses") mode, the localized effects of congestion      *
+ * can be observed.                                                     *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iiap_u {
+	u64 ii_iiap_regval;
+	struct {
+		u64 i_rq_mls:6;
+		u64 i_rsvd_1:2;
+		u64 i_rp_mls:6;
+		u64 i_rsvd:50;
+	} ii_iiap_fld_s;
+} ii_iiap_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows several parameters of CRB operation to be      *
+ * set. Note that writing to this register can have catastrophic side   *
+ * effects, if the CRB is not quiescent, i.e. if the CRB is             *
+ * processing protocol messages when the write occurs.                  *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icmr_u {
+	u64 ii_icmr_regval;
+	struct {
+		u64 i_sp_msg:1;
+		u64 i_rd_hdr:1;
+		u64 i_rsvd_4:2;
+		u64 i_c_cnt:4;
+		u64 i_rsvd_3:4;
+		u64 i_clr_rqpd:1;
+		u64 i_clr_rppd:1;
+		u64 i_rsvd_2:2;
+		u64 i_fc_cnt:4;
+		u64 i_crb_vld:15;
+		u64 i_crb_mark:15;
+		u64 i_rsvd_1:2;
+		u64 i_precise:1;
+		u64 i_rsvd:11;
+	} ii_icmr_fld_s;
+} ii_icmr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows control of the table portion of the CRB        *
+ * logic via software. Control operations from this register have       *
+ * priority over all incoming Crosstalk or BTE requests.                *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iccr_u {
+	u64 ii_iccr_regval;
+	struct {
+		u64 i_crb_num:4;
+		u64 i_rsvd_1:4;
+		u64 i_cmd:8;
+		u64 i_pending:1;
+		u64 i_rsvd:47;
+	} ii_iccr_fld_s;
+} ii_iccr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows the maximum timeout value to be programmed.    *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icto_u {
+	u64 ii_icto_regval;
+	struct {
+		u64 i_timeout:8;
+		u64 i_rsvd:56;
+	} ii_icto_fld_s;
+} ii_icto_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows the timeout prescalar to be programmed. An     *
+ * internal counter is associated with this register. When the          *
+ * internal counter reaches the value of the PRESCALE field, the        *
+ * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT]   *
+ * field). The internal counter resets to zero, and then continues      *
+ * counting.                                                            *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ictp_u {
+	u64 ii_ictp_regval;
+	struct {
+		u64 i_prescale:24;
+		u64 i_rsvd:40;
+	} ii_ictp_fld_s;
+} ii_ictp_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ * The CRB Entry registers can be conceptualized as rows and columns    *
+ * (illustrated in the table above). Each row contains the 4            *
+ * registers required for a single CRB Entry. The first doubleword      *
+ * (column) for each entry is labeled A, and the second doubleword      *
+ * (higher address) is labeled B, the third doubleword is labeled C,    *
+ * the fourth doubleword is labeled D and the fifth doubleword is       *
+ * labeled E. All CRB entries have their addresses on a quarter         *
+ * cacheline aligned boundary.                   *
+ * Upon reset, only the following fields are initialized: valid         *
+ * (VLD), priority count, timeout, timeout valid, and context valid.    *
+ * All other bits should be cleared by software before use (after       *
+ * recovering any potential error state from before the reset).         *
+ * The following four tables summarize the format for the four          *
+ * registers that are used for each ICRB# Entry.                        *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_a_u {
+	u64 ii_icrb0_a_regval;
+	struct {
+		u64 ia_iow:1;
+		u64 ia_vld:1;
+		u64 ia_addr:47;
+		u64 ia_tnum:5;
+		u64 ia_sidn:4;
+		u64 ia_rsvd:6;
+	} ii_icrb0_a_fld_s;
+} ii_icrb0_a_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_b_u {
+	u64 ii_icrb0_b_regval;
+	struct {
+		u64 ib_xt_err:1;
+		u64 ib_mark:1;
+		u64 ib_ln_uce:1;
+		u64 ib_errcode:3;
+		u64 ib_error:1;
+		u64 ib_stall__bte_1:1;
+		u64 ib_stall__bte_0:1;
+		u64 ib_stall__intr:1;
+		u64 ib_stall_ib:1;
+		u64 ib_intvn:1;
+		u64 ib_wb:1;
+		u64 ib_hold:1;
+		u64 ib_ack:1;
+		u64 ib_resp:1;
+		u64 ib_ack_cnt:11;
+		u64 ib_rsvd:7;
+		u64 ib_exc:5;
+		u64 ib_init:3;
+		u64 ib_imsg:8;
+		u64 ib_imsgtype:2;
+		u64 ib_use_old:1;
+		u64 ib_rsvd_1:11;
+	} ii_icrb0_b_fld_s;
+} ii_icrb0_b_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_c_u {
+	u64 ii_icrb0_c_regval;
+	struct {
+		u64 ic_source:15;
+		u64 ic_size:2;
+		u64 ic_ct:1;
+		u64 ic_bte_num:1;
+		u64 ic_gbr:1;
+		u64 ic_resprqd:1;
+		u64 ic_bo:1;
+		u64 ic_suppl:15;
+		u64 ic_rsvd:27;
+	} ii_icrb0_c_fld_s;
+} ii_icrb0_c_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_d_u {
+	u64 ii_icrb0_d_regval;
+	struct {
+		u64 id_pa_be:43;
+		u64 id_bte_op:1;
+		u64 id_pr_psc:4;
+		u64 id_pr_cnt:4;
+		u64 id_sleep:1;
+		u64 id_rsvd:11;
+	} ii_icrb0_d_fld_s;
+} ii_icrb0_d_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_e_u {
+	u64 ii_icrb0_e_regval;
+	struct {
+		u64 ie_timeout:8;
+		u64 ie_context:15;
+		u64 ie_rsvd:1;
+		u64 ie_tvld:1;
+		u64 ie_cvld:1;
+		u64 ie_rsvd_0:38;
+	} ii_icrb0_e_fld_s;
+} ii_icrb0_e_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the lower 64 bits of the header of the       *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
+ * register is set.                                                     *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icsml_u {
+	u64 ii_icsml_regval;
+	struct {
+		u64 i_tt_addr:47;
+		u64 i_newsuppl_ex:14;
+		u64 i_reserved:2;
+		u64 i_overflow:1;
+	} ii_icsml_fld_s;
+} ii_icsml_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the middle 64 bits of the header of the      *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
+ * register is set.                                                     *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icsmm_u {
+	u64 ii_icsmm_regval;
+	struct {
+		u64 i_tt_ack_cnt:11;
+		u64 i_reserved:53;
+	} ii_icsmm_fld_s;
+} ii_icsmm_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the microscopic state, all the inputs to     *
+ * the protocol table, captured with the spurious message. Valid when   *
+ * the SP_MSG bit in the ICMR register is set.                          *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icsmh_u {
+	u64 ii_icsmh_regval;
+	struct {
+		u64 i_tt_vld:1;
+		u64 i_xerr:1;
+		u64 i_ft_cwact_o:1;
+		u64 i_ft_wact_o:1;
+		u64 i_ft_active_o:1;
+		u64 i_sync:1;
+		u64 i_mnusg:1;
+		u64 i_mnusz:1;
+		u64 i_plusz:1;
+		u64 i_plusg:1;
+		u64 i_tt_exc:5;
+		u64 i_tt_wb:1;
+		u64 i_tt_hold:1;
+		u64 i_tt_ack:1;
+		u64 i_tt_resp:1;
+		u64 i_tt_intvn:1;
+		u64 i_g_stall_bte1:1;
+		u64 i_g_stall_bte0:1;
+		u64 i_g_stall_il:1;
+		u64 i_g_stall_ib:1;
+		u64 i_tt_imsg:8;
+		u64 i_tt_imsgtype:2;
+		u64 i_tt_use_old:1;
+		u64 i_tt_respreqd:1;
+		u64 i_tt_bte_num:1;
+		u64 i_cbn:1;
+		u64 i_match:1;
+		u64 i_rpcnt_lt_34:1;
+		u64 i_rpcnt_ge_34:1;
+		u64 i_rpcnt_lt_18:1;
+		u64 i_rpcnt_ge_18:1;
+		u64 i_rpcnt_lt_2:1;
+		u64 i_rpcnt_ge_2:1;
+		u64 i_rqcnt_lt_18:1;
+		u64 i_rqcnt_ge_18:1;
+		u64 i_rqcnt_lt_2:1;
+		u64 i_rqcnt_ge_2:1;
+		u64 i_tt_device:7;
+		u64 i_tt_init:3;
+		u64 i_reserved:5;
+	} ii_icsmh_fld_s;
+} ii_icsmh_u_t;
+
+/************************************************************************
+ *									*
+ *  The Shub DEBUG unit provides a 3-bit selection signal to the        *
+ * II core and a 3-bit selection signal to the fsbclk domain in the II  *
+ * wrapper.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_idbss_u {
+	u64 ii_idbss_regval;
+	struct {
+		u64 i_iioclk_core_submenu:3;
+		u64 i_rsvd:5;
+		u64 i_fsbclk_wrapper_submenu:3;
+		u64 i_rsvd_1:5;
+		u64 i_iioclk_menu:5;
+		u64 i_rsvd_2:43;
+	} ii_idbss_fld_s;
+} ii_idbss_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register is used to set up the length for a       *
+ * transfer and then to monitor the progress of that transfer. This     *
+ * register needs to be initialized before a transfer is started. A     *
+ * legitimate write to this register will set the Busy bit, clear the   *
+ * Error bit, and initialize the length to the value desired.           *
+ * While the transfer is in progress, hardware will decrement the       *
+ * length field with each successful block that is copied. Once the     *
+ * transfer completes, hardware will clear the Busy bit. The length     *
+ * field will also contain the number of cache lines left to be         *
+ * transferred.                                                         *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibls0_u {
+	u64 ii_ibls0_regval;
+	struct {
+		u64 i_length:16;
+		u64 i_error:1;
+		u64 i_rsvd_1:3;
+		u64 i_busy:1;
+		u64 i_rsvd:43;
+	} ii_ibls0_fld_s;
+} ii_ibls0_u_t;
+
+/************************************************************************
+ *									*
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibsa0_u {
+	u64 ii_ibsa0_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:42;
+		u64 i_rsvd:15;
+	} ii_ibsa0_fld_s;
+} ii_ibsa0_u_t;
+
+/************************************************************************
+ *									*
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibda0_u {
+	u64 ii_ibda0_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:42;
+		u64 i_rsvd:15;
+	} ii_ibda0_fld_s;
+} ii_ibda0_u_t;
+
+/************************************************************************
+ *									*
+ *  Writing to this register sets up the attributes of the transfer     *
+ * and initiates the transfer operation. Reading this register has      *
+ * the side effect of terminating any transfer in progress. Note:       *
+ * stopping a transfer midstream could have an adverse impact on the    *
+ * other BTE. If a BTE stream has to be stopped (due to error           *
+ * handling for example), both BTE streams should be stopped and        *
+ * their transfers discarded.                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibct0_u {
+	u64 ii_ibct0_regval;
+	struct {
+		u64 i_zerofill:1;
+		u64 i_rsvd_2:3;
+		u64 i_notify:1;
+		u64 i_rsvd_1:3;
+		u64 i_poison:1;
+		u64 i_rsvd:55;
+	} ii_ibct0_fld_s;
+} ii_ibct0_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the address to which the WINV is sent.       *
+ * This address has to be cache line aligned.                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibna0_u {
+	u64 ii_ibna0_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:42;
+		u64 i_rsvd:15;
+	} ii_ibna0_fld_s;
+} ii_ibna0_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the programmable level as well as the node   *
+ * ID and PI unit of the processor to which the interrupt will be       *
+ * sent.								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibia0_u {
+	u64 ii_ibia0_regval;
+	struct {
+		u64 i_rsvd_2:1;
+		u64 i_node_id:11;
+		u64 i_rsvd_1:4;
+		u64 i_level:7;
+		u64 i_rsvd:41;
+	} ii_ibia0_fld_s;
+} ii_ibia0_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register is used to set up the length for a       *
+ * transfer and then to monitor the progress of that transfer. This     *
+ * register needs to be initialized before a transfer is started. A     *
+ * legitimate write to this register will set the Busy bit, clear the   *
+ * Error bit, and initialize the length to the value desired.           *
+ * While the transfer is in progress, hardware will decrement the       *
+ * length field with each successful block that is copied. Once the     *
+ * transfer completes, hardware will clear the Busy bit. The length     *
+ * field will also contain the number of cache lines left to be         *
+ * transferred.                                                         *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibls1_u {
+	u64 ii_ibls1_regval;
+	struct {
+		u64 i_length:16;
+		u64 i_error:1;
+		u64 i_rsvd_1:3;
+		u64 i_busy:1;
+		u64 i_rsvd:43;
+	} ii_ibls1_fld_s;
+} ii_ibls1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibsa1_u {
+	u64 ii_ibsa1_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:33;
+		u64 i_rsvd:24;
+	} ii_ibsa1_fld_s;
+} ii_ibsa1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibda1_u {
+	u64 ii_ibda1_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:33;
+		u64 i_rsvd:24;
+	} ii_ibda1_fld_s;
+} ii_ibda1_u_t;
+
+/************************************************************************
+ *									*
+ *  Writing to this register sets up the attributes of the transfer     *
+ * and initiates the transfer operation. Reading this register has      *
+ * the side effect of terminating any transfer in progress. Note:       *
+ * stopping a transfer midstream could have an adverse impact on the    *
+ * other BTE. If a BTE stream has to be stopped (due to error           *
+ * handling for example), both BTE streams should be stopped and        *
+ * their transfers discarded.                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibct1_u {
+	u64 ii_ibct1_regval;
+	struct {
+		u64 i_zerofill:1;
+		u64 i_rsvd_2:3;
+		u64 i_notify:1;
+		u64 i_rsvd_1:3;
+		u64 i_poison:1;
+		u64 i_rsvd:55;
+	} ii_ibct1_fld_s;
+} ii_ibct1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the address to which the WINV is sent.       *
+ * This address has to be cache line aligned.                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibna1_u {
+	u64 ii_ibna1_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:33;
+		u64 i_rsvd:24;
+	} ii_ibna1_fld_s;
+} ii_ibna1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the programmable level as well as the node   *
+ * ID and PI unit of the processor to which the interrupt will be       *
+ * sent.								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibia1_u {
+	u64 ii_ibia1_regval;
+	struct {
+		u64 i_pi_id:1;
+		u64 i_node_id:8;
+		u64 i_rsvd_1:7;
+		u64 i_level:7;
+		u64 i_rsvd:41;
+	} ii_ibia1_fld_s;
+} ii_ibia1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register defines the resources that feed information into      *
+ * the two performance counters located in the IO Performance           *
+ * Profiling Register. There are 17 different quantities that can be    *
+ * measured. Given these 17 different options, the two performance      *
+ * counters have 15 of them in common; menu selections 0 through 0xE    *
+ * are identical for each performance counter. As for the other two     *
+ * options, one is available from one performance counter and the       *
+ * other is available from the other performance counter. Hence, the    *
+ * II supports all 17*16=272 possible combinations of quantities to     *
+ * measure.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ipcr_u {
+	u64 ii_ipcr_regval;
+	struct {
+		u64 i_ippr0_c:4;
+		u64 i_ippr1_c:4;
+		u64 i_icct:8;
+		u64 i_rsvd:48;
+	} ii_ipcr_fld_s;
+} ii_ipcr_u_t;
+
+/************************************************************************
+ *									*
+ *									*
+ *									*
+ ************************************************************************/
+
+typedef union ii_ippr_u {
+	u64 ii_ippr_regval;
+	struct {
+		u64 i_ippr0:32;
+		u64 i_ippr1:32;
+	} ii_ippr_fld_s;
+} ii_ippr_u_t;
+
+/************************************************************************
+ *									*
+ * The following defines which were not formed into structures are	*
+ * probably indentical to another register, and the name of the		*
+ * register is provided against each of these registers. This		*
+ * information needs to be checked carefully				*
+ *									*
+ *		IIO_ICRB1_A		IIO_ICRB0_A			*
+ *		IIO_ICRB1_B		IIO_ICRB0_B			*
+ *		IIO_ICRB1_C		IIO_ICRB0_C			*
+ *		IIO_ICRB1_D		IIO_ICRB0_D			*
+ *		IIO_ICRB1_E		IIO_ICRB0_E			*
+ *		IIO_ICRB2_A		IIO_ICRB0_A			*
+ *		IIO_ICRB2_B		IIO_ICRB0_B			*
+ *		IIO_ICRB2_C		IIO_ICRB0_C			*
+ *		IIO_ICRB2_D		IIO_ICRB0_D			*
+ *		IIO_ICRB2_E		IIO_ICRB0_E			*
+ *		IIO_ICRB3_A		IIO_ICRB0_A			*
+ *		IIO_ICRB3_B		IIO_ICRB0_B			*
+ *		IIO_ICRB3_C		IIO_ICRB0_C			*
+ *		IIO_ICRB3_D		IIO_ICRB0_D			*
+ *		IIO_ICRB3_E		IIO_ICRB0_E			*
+ *		IIO_ICRB4_A		IIO_ICRB0_A			*
+ *		IIO_ICRB4_B		IIO_ICRB0_B			*
+ *		IIO_ICRB4_C		IIO_ICRB0_C			*
+ *		IIO_ICRB4_D		IIO_ICRB0_D			*
+ *		IIO_ICRB4_E		IIO_ICRB0_E			*
+ *		IIO_ICRB5_A		IIO_ICRB0_A			*
+ *		IIO_ICRB5_B		IIO_ICRB0_B			*
+ *		IIO_ICRB5_C		IIO_ICRB0_C			*
+ *		IIO_ICRB5_D		IIO_ICRB0_D			*
+ *		IIO_ICRB5_E		IIO_ICRB0_E			*
+ *		IIO_ICRB6_A		IIO_ICRB0_A			*
+ *		IIO_ICRB6_B		IIO_ICRB0_B			*
+ *		IIO_ICRB6_C		IIO_ICRB0_C			*
+ *		IIO_ICRB6_D		IIO_ICRB0_D			*
+ *		IIO_ICRB6_E		IIO_ICRB0_E			*
+ *		IIO_ICRB7_A		IIO_ICRB0_A			*
+ *		IIO_ICRB7_B		IIO_ICRB0_B			*
+ *		IIO_ICRB7_C		IIO_ICRB0_C			*
+ *		IIO_ICRB7_D		IIO_ICRB0_D			*
+ *		IIO_ICRB7_E		IIO_ICRB0_E			*
+ *		IIO_ICRB8_A		IIO_ICRB0_A			*
+ *		IIO_ICRB8_B		IIO_ICRB0_B			*
+ *		IIO_ICRB8_C		IIO_ICRB0_C			*
+ *		IIO_ICRB8_D		IIO_ICRB0_D			*
+ *		IIO_ICRB8_E		IIO_ICRB0_E			*
+ *		IIO_ICRB9_A		IIO_ICRB0_A			*
+ *		IIO_ICRB9_B		IIO_ICRB0_B			*
+ *		IIO_ICRB9_C		IIO_ICRB0_C			*
+ *		IIO_ICRB9_D		IIO_ICRB0_D			*
+ *		IIO_ICRB9_E		IIO_ICRB0_E			*
+ *		IIO_ICRBA_A		IIO_ICRB0_A			*
+ *		IIO_ICRBA_B		IIO_ICRB0_B			*
+ *		IIO_ICRBA_C		IIO_ICRB0_C			*
+ *		IIO_ICRBA_D		IIO_ICRB0_D			*
+ *		IIO_ICRBA_E		IIO_ICRB0_E			*
+ *		IIO_ICRBB_A		IIO_ICRB0_A			*
+ *		IIO_ICRBB_B		IIO_ICRB0_B			*
+ *		IIO_ICRBB_C		IIO_ICRB0_C			*
+ *		IIO_ICRBB_D		IIO_ICRB0_D			*
+ *		IIO_ICRBB_E		IIO_ICRB0_E			*
+ *		IIO_ICRBC_A		IIO_ICRB0_A			*
+ *		IIO_ICRBC_B		IIO_ICRB0_B			*
+ *		IIO_ICRBC_C		IIO_ICRB0_C			*
+ *		IIO_ICRBC_D		IIO_ICRB0_D			*
+ *		IIO_ICRBC_E		IIO_ICRB0_E			*
+ *		IIO_ICRBD_A		IIO_ICRB0_A			*
+ *		IIO_ICRBD_B		IIO_ICRB0_B			*
+ *		IIO_ICRBD_C		IIO_ICRB0_C			*
+ *		IIO_ICRBD_D		IIO_ICRB0_D			*
+ *		IIO_ICRBD_E		IIO_ICRB0_E			*
+ *		IIO_ICRBE_A		IIO_ICRB0_A			*
+ *		IIO_ICRBE_B		IIO_ICRB0_B			*
+ *		IIO_ICRBE_C		IIO_ICRB0_C			*
+ *		IIO_ICRBE_D		IIO_ICRB0_D			*
+ *		IIO_ICRBE_E		IIO_ICRB0_E			*
+ *									*
+ ************************************************************************/
+
+/*
+ * Slightly friendlier names for some common registers.
+ */
+#define IIO_WIDGET              IIO_WID		/* Widget identification */
+#define IIO_WIDGET_STAT         IIO_WSTAT	/* Widget status register */
+#define IIO_WIDGET_CTRL         IIO_WCR		/* Widget control register */
+#define IIO_PROTECT             IIO_ILAPR	/* IO interface protection */
+#define IIO_PROTECT_OVRRD       IIO_ILAPO	/* IO protect override */
+#define IIO_OUTWIDGET_ACCESS    IIO_IOWA	/* Outbound widget access */
+#define IIO_INWIDGET_ACCESS     IIO_IIWA	/* Inbound widget access */
+#define IIO_INDEV_ERR_MASK      IIO_IIDEM	/* Inbound device error mask */
+#define IIO_LLP_CSR             IIO_ILCSR	/* LLP control and status */
+#define IIO_LLP_LOG             IIO_ILLR	/* LLP log */
+#define IIO_XTALKCC_TOUT        IIO_IXCC	/* Xtalk credit count timeout */
+#define IIO_XTALKTT_TOUT        IIO_IXTT	/* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR          IIO_IECLR	/* IO error clear */
+#define IIO_IGFX_0 		IIO_IGFX0
+#define IIO_IGFX_1 		IIO_IGFX1
+#define IIO_IBCT_0		IIO_IBCT0
+#define IIO_IBCT_1		IIO_IBCT1
+#define IIO_IBLS_0		IIO_IBLS0
+#define IIO_IBLS_1		IIO_IBLS1
+#define IIO_IBSA_0		IIO_IBSA0
+#define IIO_IBSA_1		IIO_IBSA1
+#define IIO_IBDA_0		IIO_IBDA0
+#define IIO_IBDA_1		IIO_IBDA1
+#define IIO_IBNA_0		IIO_IBNA0
+#define IIO_IBNA_1		IIO_IBNA1
+#define IIO_IBIA_0		IIO_IBIA0
+#define IIO_IBIA_1		IIO_IBIA1
+#define IIO_IOPRB_0		IIO_IPRB0
+
+#define IIO_PRTE_A(_x)		(IIO_IPRTE0_A + (8 * (_x)))
+#define IIO_PRTE_B(_x)		(IIO_IPRTE0_B + (8 * (_x)))
+#define IIO_NUM_PRTES		8	/* Total number of PRB table entries */
+#define IIO_WIDPRTE_A(x)	IIO_PRTE_A(((x) - 8))	/* widget ID to its PRTE num */
+#define IIO_WIDPRTE_B(x)	IIO_PRTE_B(((x) - 8))	/* widget ID to its PRTE num */
+
+#define IIO_NUM_IPRBS 		9
+
+#define IIO_LLP_CSR_IS_UP		0x00002000
+#define IIO_LLP_CSR_LLP_STAT_MASK       0x00003000
+#define IIO_LLP_CSR_LLP_STAT_SHFT       12
+
+#define IIO_LLP_CB_MAX  0xffff	/* in ILLR CB_CNT, Max Check Bit errors */
+#define IIO_LLP_SN_MAX  0xffff	/* in ILLR SN_CNT, Max Sequence Number errors */
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY   0x53474972756c6573ull	/* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0          IIO_IBLS_0	/* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0           IIO_IBSA_0	/* Also BTE source address  0 */
+#define IIO_BTE_DEST_0          IIO_IBDA_0	/* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0          IIO_IBCT_0	/* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0        IIO_IBNA_0	/* Also BTE notification 0 */
+#define IIO_BTE_INT_0           IIO_IBIA_0	/* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0           0	/* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1   	(IIO_IBLS_1 - IIO_IBLS_0)	/* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT             0
+#define BTEOFF_SRC      	(IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST     	(IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL     	(IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY   	(IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT      	(IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+/* names used in shub diags */
+#define IIO_BASE_BTE0   IIO_IBLS_0
+#define IIO_BASE_BTE1   IIO_IBLS_1
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define IIO_IOPRB(_x)	(IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+                	(_x) : \
+                	(_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT	0
+#define IIO_IGFX_PI_NUM_BITS	1	/* size of PI num field */
+#define IIO_IGFX_PI_NUM_MASK	((1<<IIO_IGFX_PI_NUM_BITS)-1)
+#define IIO_IGFX_PI_NUM_SHIFT	4
+#define IIO_IGFX_N_NUM_BITS	8	/* size of node num field */
+#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT	5
+#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT	16
+#define IIO_IGFX_INIT(widget, pi, node, cpu)				(\
+	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
+	(((pi)     & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)|	 \
+	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
+	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT))
+
+/* Scratch registers (all bits available) */
+#define IIO_SCRATCH_REG0        IIO_ISCR0
+#define IIO_SCRATCH_REG1        IIO_ISCR1
+#define IIO_SCRATCH_MASK        0xffffffffffffffffUL
+
+#define IIO_SCRATCH_BIT0_0      0x0000000000000001UL
+#define IIO_SCRATCH_BIT0_1      0x0000000000000002UL
+#define IIO_SCRATCH_BIT0_2      0x0000000000000004UL
+#define IIO_SCRATCH_BIT0_3      0x0000000000000008UL
+#define IIO_SCRATCH_BIT0_4      0x0000000000000010UL
+#define IIO_SCRATCH_BIT0_5      0x0000000000000020UL
+#define IIO_SCRATCH_BIT0_6      0x0000000000000040UL
+#define IIO_SCRATCH_BIT0_7      0x0000000000000080UL
+#define IIO_SCRATCH_BIT0_8      0x0000000000000100UL
+#define IIO_SCRATCH_BIT0_9      0x0000000000000200UL
+#define IIO_SCRATCH_BIT0_A      0x0000000000000400UL
+
+#define IIO_SCRATCH_BIT1_0      0x0000000000000001UL
+#define IIO_SCRATCH_BIT1_1      0x0000000000000002UL
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES   7	/* ITTEs numbered 0..6 */
+					/* Hw manuals number them 1..7! */
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD  0x1UL	/* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD	(1UL << 4)	/* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD	(1UL << 8)	/* BTE 1 Shut down due to error */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the shub, we've
+ * redefined big window 7 as small window 0.
+ XXX does this still apply for SN1??
+ */
+#define HUB_NUM_BIG_WINDOW	(IIO_NUM_ITTES - 1)
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN            HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET        0x100
+
+/*
+ * CRB manipulation macros
+ *	The CRB macros are slightly complicated, since there are up to
+ *	four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS            15	/* Number of CRBs */
+#define IIO_NUM_PC_CRBS         4	/* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET         8
+#define IIO_ICRB_0              IIO_ICRB0_A
+#define IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+/* XXX - This is now tuneable:
+        #define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x)	((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x))))
+#define IIO_ICRB_B(_x)	((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET))
+#define IIO_ICRB_C(_x)	((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET))
+#define IIO_ICRB_D(_x)	((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET))
+#define IIO_ICRB_E(_x)	((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET))
+
+#define TNUM_TO_WIDGET_DEV(_tnum)	(_tnum & 0x7)
+
+/*
+ * values for "ecode" field
+ */
+#define IIO_ICRB_ECODE_DERR     0	/* Directory error due to IIO access */
+#define IIO_ICRB_ECODE_PERR     1	/* Poison error on IO access */
+#define IIO_ICRB_ECODE_WERR     2	/* Write error by IIO access
+					 * e.g. WINV to a Read only line. */
+#define IIO_ICRB_ECODE_AERR     3	/* Access error caused by IIO access */
+#define IIO_ICRB_ECODE_PWERR    4	/* Error on partial write */
+#define IIO_ICRB_ECODE_PRERR    5	/* Error on partial read  */
+#define IIO_ICRB_ECODE_TOUT     6	/* CRB timeout before deallocating */
+#define IIO_ICRB_ECODE_XTERR    7	/* Incoming xtalk pkt had error bit */
+
+/*
+ * Values for field imsgtype
+ */
+#define IIO_ICRB_IMSGT_XTALK    0	/* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_BTE      1	/* Incoming message from BTE    */
+#define IIO_ICRB_IMSGT_SN1NET   2	/* Incoming message from SN1 net */
+#define IIO_ICRB_IMSGT_CRB      3	/* Incoming message from CRB ???  */
+
+/*
+ * values for field initiator.
+ */
+#define IIO_ICRB_INIT_XTALK     0	/* Message originated in xtalk  */
+#define IIO_ICRB_INIT_BTE0      0x1	/* Message originated in BTE 0  */
+#define IIO_ICRB_INIT_SN1NET    0x2	/* Message originated in SN1net */
+#define IIO_ICRB_INIT_CRB       0x3	/* Message originated in CRB ?  */
+#define IIO_ICRB_INIT_BTE1      0x5	/* MEssage originated in BTE 1  */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define		   HUBII_XBOW_CREDIT       3
+#define		   HUBII_XBOW_REV2_CREDIT  4
+
+/*
+ * Number of credits that xtalk devices should use when communicating
+ * with a SHub (depth of SHub's queue).
+ */
+#define HUB_CREDIT 4
+
+/*
+ * Some IIO_PRB fields
+ */
+#define IIO_PRB_MULTI_ERR	(1LL << 63)
+#define IIO_PRB_SPUR_RD		(1LL << 51)
+#define IIO_PRB_SPUR_WR		(1LL << 50)
+#define IIO_PRB_RD_TO		(1LL << 49)
+#define IIO_PRB_ERROR		(1LL << 48)
+
+/*************************************************************************
+
+ Some of the IIO field masks and shifts are defined here.
+ This is in order to maintain compatibility in SN0 and SN1 code
+ 
+**************************************************************************/
+
+/*
+ * ICMR register fields
+ * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not
+ * present in SHub)
+ */
+
+#define IIO_ICMR_CRB_VLD_SHFT   20
+#define IIO_ICMR_CRB_VLD_MASK	(0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT    16
+#define IIO_ICMR_FC_CNT_MASK	(0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT     4
+#define IIO_ICMR_C_CNT_MASK	(0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE	(1UL << 52)
+#define IIO_ICMR_CLR_RPPD	(1UL << 13)
+#define IIO_ICMR_CLR_RQPD	(1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ XXX present but not needed in bedrock?  See the manual.
+ */
+#define IIO_IPDR_PND    	(1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define IIO_ICDR_PND    	(1 << 4)
+
+/* 
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY		(0x1UL << 20)
+#define IBLS_ERROR_SHFT		16
+#define IBLS_ERROR		(0x1UL << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK	0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON		(0x1UL << 8)
+#define IBCT_NOTIFY		(0x1UL << 4)
+#define IBCT_ZFIL_MODE		(0x1UL << 0)
+
+/*
+ * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2)
+ */
+#define IIEPH1_VALID		(1UL << 44)
+#define IIEPH1_OVERRUN		(1UL << 40)
+#define IIEPH1_ERR_TYPE_SHFT	32
+#define IIEPH1_ERR_TYPE_MASK	0xf
+#define IIEPH1_SOURCE_SHFT	20
+#define IIEPH1_SOURCE_MASK	11
+#define IIEPH1_SUPPL_SHFT	8
+#define IIEPH1_SUPPL_MASK	11
+#define IIEPH1_CMD_SHFT		0
+#define IIEPH1_CMD_MASK		7
+
+#define IIEPH2_TAIL		(1UL << 40)
+#define IIEPH2_ADDRESS_SHFT	0
+#define IIEPH2_ADDRESS_MASK	38
+
+#define IIEPH1_ERR_SHORT_REQ	2
+#define IIEPH1_ERR_SHORT_REPLY	3
+#define IIEPH1_ERR_LONG_REQ	4
+#define IIEPH1_ERR_LONG_REPLY	5
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_PI1_FWD_INT	(1UL << 31)	/* clear PI1_FORWARD_INT in iidsr */
+#define IECLR_PI0_FWD_INT	(1UL << 30)	/* clear PI0_FORWARD_INT in iidsr */
+#define IECLR_SPUR_RD_HDR	(1UL << 29)	/* clear valid bit in ixss reg */
+#define IECLR_BTE1		(1UL << 18)	/* clear bte error 1 */
+#define IECLR_BTE0		(1UL << 17)	/* clear bte error 0 */
+#define IECLR_CRAZY		(1UL << 16)	/* clear crazy bit in wstat reg */
+#define IECLR_PRB_F		(1UL << 15)	/* clear err bit in PRB_F reg */
+#define IECLR_PRB_E		(1UL << 14)	/* clear err bit in PRB_E reg */
+#define IECLR_PRB_D		(1UL << 13)	/* clear err bit in PRB_D reg */
+#define IECLR_PRB_C		(1UL << 12)	/* clear err bit in PRB_C reg */
+#define IECLR_PRB_B		(1UL << 11)	/* clear err bit in PRB_B reg */
+#define IECLR_PRB_A		(1UL << 10)	/* clear err bit in PRB_A reg */
+#define IECLR_PRB_9		(1UL << 9)	/* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8		(1UL << 8)	/* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0		(1UL << 0)	/* clear err bit in PRB_0 reg */
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR 
+ */
+#define	IIO_ICCR_PENDING	0x10000
+#define	IIO_ICCR_CMD_MASK	0xFF
+#define	IIO_ICCR_CMD_SHFT	7
+#define	IIO_ICCR_CMD_NOP	0x0	/* No Op */
+#define	IIO_ICCR_CMD_WAKE	0x100	/* Reactivate CRB entry and process */
+#define	IIO_ICCR_CMD_TIMEOUT	0x200	/* Make CRB timeout & mark invalid */
+#define	IIO_ICCR_CMD_EJECT	0x400	/* Contents of entry written to memory
+					 * via a WB
+					 */
+#define	IIO_ICCR_CMD_FLUSH	0x800
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to shub IIO's status.
+ * Quiescing implies  no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Easy access macros for CRBs, all 5 registers (A-E)
+ */
+typedef ii_icrb0_a_u_t icrba_t;
+#define a_sidn		ii_icrb0_a_fld_s.ia_sidn
+#define a_tnum		ii_icrb0_a_fld_s.ia_tnum
+#define a_addr          ii_icrb0_a_fld_s.ia_addr
+#define a_valid         ii_icrb0_a_fld_s.ia_vld
+#define a_iow           ii_icrb0_a_fld_s.ia_iow
+#define a_regvalue	ii_icrb0_a_regval
+
+typedef ii_icrb0_b_u_t icrbb_t;
+#define b_use_old       ii_icrb0_b_fld_s.ib_use_old
+#define b_imsgtype      ii_icrb0_b_fld_s.ib_imsgtype
+#define b_imsg          ii_icrb0_b_fld_s.ib_imsg
+#define b_initiator     ii_icrb0_b_fld_s.ib_init
+#define b_exc           ii_icrb0_b_fld_s.ib_exc
+#define b_ackcnt        ii_icrb0_b_fld_s.ib_ack_cnt
+#define b_resp          ii_icrb0_b_fld_s.ib_resp
+#define b_ack           ii_icrb0_b_fld_s.ib_ack
+#define b_hold          ii_icrb0_b_fld_s.ib_hold
+#define b_wb            ii_icrb0_b_fld_s.ib_wb
+#define b_intvn         ii_icrb0_b_fld_s.ib_intvn
+#define b_stall_ib      ii_icrb0_b_fld_s.ib_stall_ib
+#define b_stall_int     ii_icrb0_b_fld_s.ib_stall__intr
+#define b_stall_bte_0   ii_icrb0_b_fld_s.ib_stall__bte_0
+#define b_stall_bte_1   ii_icrb0_b_fld_s.ib_stall__bte_1
+#define b_error         ii_icrb0_b_fld_s.ib_error
+#define b_ecode         ii_icrb0_b_fld_s.ib_errcode
+#define b_lnetuce       ii_icrb0_b_fld_s.ib_ln_uce
+#define b_mark          ii_icrb0_b_fld_s.ib_mark
+#define b_xerr          ii_icrb0_b_fld_s.ib_xt_err
+#define b_regvalue	ii_icrb0_b_regval
+
+typedef ii_icrb0_c_u_t icrbc_t;
+#define c_suppl         ii_icrb0_c_fld_s.ic_suppl
+#define c_barrop        ii_icrb0_c_fld_s.ic_bo
+#define c_doresp        ii_icrb0_c_fld_s.ic_resprqd
+#define c_gbr           ii_icrb0_c_fld_s.ic_gbr
+#define c_btenum        ii_icrb0_c_fld_s.ic_bte_num
+#define c_cohtrans      ii_icrb0_c_fld_s.ic_ct
+#define c_xtsize        ii_icrb0_c_fld_s.ic_size
+#define c_source        ii_icrb0_c_fld_s.ic_source
+#define c_regvalue	ii_icrb0_c_regval
+
+typedef ii_icrb0_d_u_t icrbd_t;
+#define d_sleep         ii_icrb0_d_fld_s.id_sleep
+#define d_pricnt        ii_icrb0_d_fld_s.id_pr_cnt
+#define d_pripsc        ii_icrb0_d_fld_s.id_pr_psc
+#define d_bteop         ii_icrb0_d_fld_s.id_bte_op
+#define d_bteaddr       ii_icrb0_d_fld_s.id_pa_be	/* ic_pa_be fld has 2 names */
+#define d_benable       ii_icrb0_d_fld_s.id_pa_be	/* ic_pa_be fld has 2 names */
+#define d_regvalue	ii_icrb0_d_regval
+
+typedef ii_icrb0_e_u_t icrbe_t;
+#define icrbe_ctxtvld   ii_icrb0_e_fld_s.ie_cvld
+#define icrbe_toutvld   ii_icrb0_e_fld_s.ie_tvld
+#define icrbe_context   ii_icrb0_e_fld_s.ie_context
+#define icrbe_timeout   ii_icrb0_e_fld_s.ie_timeout
+#define e_regvalue	ii_icrb0_e_regval
+
+/* Number of widgets supported by shub */
+#define HUB_NUM_WIDGET          9
+#define HUB_WIDGET_ID_MIN       0x8
+#define HUB_WIDGET_ID_MAX       0xf
+
+#define HUB_WIDGET_PART_NUM     0xc120
+#define MAX_HUBS_PER_XBOW       2
+
+/* A few more #defines for backwards compatibility */
+#define iprb_t          ii_iprb0_u_t
+#define iprb_regval     ii_iprb0_regval
+#define iprb_mult_err	ii_iprb0_fld_s.i_mult_err
+#define iprb_spur_rd	ii_iprb0_fld_s.i_spur_rd
+#define iprb_spur_wr	ii_iprb0_fld_s.i_spur_wr
+#define iprb_rd_to	ii_iprb0_fld_s.i_rd_to
+#define iprb_ovflow     ii_iprb0_fld_s.i_of_cnt
+#define iprb_error      ii_iprb0_fld_s.i_error
+#define iprb_ff         ii_iprb0_fld_s.i_f
+#define iprb_mode       ii_iprb0_fld_s.i_m
+#define iprb_bnakctr    ii_iprb0_fld_s.i_nb
+#define iprb_anakctr    ii_iprb0_fld_s.i_na
+#define iprb_xtalkctr   ii_iprb0_fld_s.i_c
+
+#define LNK_STAT_WORKING        0x2		/* LLP is working */
+
+#define IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
+#define IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
+#define IIO_WSTAT_TXRETRY_MASK  0x7F		/* should be 0xFF?? */
+#define IIO_WSTAT_TXRETRY_SHFT  16
+#define IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+                          		IIO_WSTAT_TXRETRY_MASK)
+
+/* Number of II perf. counters we can multiplex at once */
+
+#define IO_PERF_SETS	32
+
+/* Bit for the widget in inbound access register */
+#define IIO_IIWA_WIDGET(_w)	((u64)(1ULL << _w))
+/* Bit for the widget in outbound access register */
+#define IIO_IOWA_WIDGET(_w)	((u64)(1ULL << _w))
+
+/* NOTE: The following define assumes that we are going to get
+ * widget numbers from 8 thru F and the device numbers within
+ * widget from 0 thru 7.
+ */
+#define IIO_IIDEM_WIDGETDEV_MASK(w, d)	((u64)(1ULL << (8 * ((w) - 8) + (d))))
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT    28
+#define IIO_IIDSR_SENT_MASK     0x30000000
+#define IIO_IIDSR_ENB_SHIFT     24
+#define IIO_IIDSR_ENB_MASK      0x01000000
+#define IIO_IIDSR_NODE_SHIFT    9
+#define IIO_IIDSR_NODE_MASK     0x000ff700
+#define IIO_IIDSR_PI_ID_SHIFT   8
+#define IIO_IIDSR_PI_ID_MASK    0x00000100
+#define IIO_IIDSR_LVL_SHIFT     0
+#define IIO_IIDSR_LVL_MASK      0x000000ff
+
+/* Xtalk timeout threshhold register (IIO_IXTT) */
+#define IXTT_RRSP_TO_SHFT	55	/* read response timeout */
+#define IXTT_RRSP_TO_MASK	(0x1FULL << IXTT_RRSP_TO_SHFT)
+#define IXTT_RRSP_PS_SHFT	32	/* read responsed TO prescalar */
+#define IXTT_RRSP_PS_MASK	(0x7FFFFFULL << IXTT_RRSP_PS_SHFT)
+#define IXTT_TAIL_TO_SHFT	0	/* tail timeout counter threshold */
+#define IXTT_TAIL_TO_MASK	(0x3FFFFFFULL << IXTT_TAIL_TO_SHFT)
+
+/*
+ * The IO LLP control status register and widget control register
+ */
+
+typedef union hubii_wcr_u {
+	u64 wcr_reg_value;
+	struct {
+		u64 wcr_widget_id:4,	/* LLP crossbar credit */
+		 wcr_tag_mode:1,	/* Tag mode */
+		 wcr_rsvd1:8,	/* Reserved */
+		 wcr_xbar_crd:3,	/* LLP crossbar credit */
+		 wcr_f_bad_pkt:1,	/* Force bad llp pkt enable */
+		 wcr_dir_con:1,	/* widget direct connect */
+		 wcr_e_thresh:5,	/* elasticity threshold */
+		 wcr_rsvd:41;	/* unused */
+	} wcr_fields_s;
+} hubii_wcr_t;
+
+#define iwcr_dir_con    wcr_fields_s.wcr_dir_con
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+   performed */
+
+typedef union io_perf_sel {
+	u64 perf_sel_reg;
+	struct {
+		u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48;
+	} perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the shub registers. Due to
+   hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+	u64 perf_cnt;
+	struct {
+		u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32;
+	} perf_cnt_bits;
+
+} io_perf_cnt_t;
+
+typedef union iprte_a {
+	u64 entry;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_addr:38;
+		u64 i_init:3;
+		u64 i_source:8;
+		u64 i_rsvd:2;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} iprte_fields;
+} iprte_a_t;
+
+#endif				/* _ASM_IA64_SN_SHUBIO_H */
diff --git a/arch/ia64/include/asm/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h
new file mode 100644
index 00000000000..c2611f6cfe3
--- /dev/null
+++ b/arch/ia64/include/asm/sn/simulator.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SIMULATOR_H
+#define _ASM_IA64_SN_SIMULATOR_H
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
+#define SNMAGIC 0xaeeeeeee8badbeefL
+#define IS_MEDUSA()			({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
+
+#define SIMULATOR_SLEEP()		asm("nop.i 0x8beef")
+#define IS_RUNNING_ON_SIMULATOR()	(sn_prom_type)
+#define IS_RUNNING_ON_FAKE_PROM()	(sn_prom_type == 2)
+extern int sn_prom_type;		/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
+#else
+#define IS_MEDUSA()			0
+#define SIMULATOR_SLEEP()
+#define IS_RUNNING_ON_SIMULATOR()	0
+#endif
+
+#endif /* _ASM_IA64_SN_SIMULATOR_H */
diff --git a/arch/ia64/include/asm/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
new file mode 100644
index 00000000000..e61ebac38cd
--- /dev/null
+++ b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
@@ -0,0 +1,242 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
+ *
+ * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
+ * SGI Altix node and router hardware
+ *
+ * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
+ */
+
+#ifndef SN_HWPERF_H
+#define SN_HWPERF_H
+
+/*
+ * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
+ * return an array of these. Do not change this without also
+ * changing the corresponding SAL code.
+ */
+#define SN_HWPERF_MAXSTRING		128
+struct sn_hwperf_object_info {
+	u32 id;
+	union {
+		struct {
+			u64 this_part:1;
+			u64 is_shared:1;
+		} fields;
+		struct {
+			u64 flags;
+			u64 reserved;
+		} b;
+	} f;
+	char name[SN_HWPERF_MAXSTRING];
+	char location[SN_HWPERF_MAXSTRING];
+	u32 ports;
+};
+
+#define sn_hwp_this_part	f.fields.this_part
+#define sn_hwp_is_shared	f.fields.is_shared
+#define sn_hwp_flags		f.b.flags
+
+/* macros for object classification */
+#define SN_HWPERF_IS_NODE(x)		((x) && strstr((x)->name, "SHub"))
+#define SN_HWPERF_IS_NODE_SHUB2(x)	((x) && strstr((x)->name, "SHub 2."))
+#define SN_HWPERF_IS_IONODE(x)		((x) && strstr((x)->name, "TIO"))
+#define SN_HWPERF_IS_NL3ROUTER(x)	((x) && strstr((x)->name, "NL3Router"))
+#define SN_HWPERF_IS_NL4ROUTER(x)	((x) && strstr((x)->name, "NL4Router"))
+#define SN_HWPERF_IS_OLDROUTER(x)	((x) && strstr((x)->name, "Router"))
+#define SN_HWPERF_IS_ROUTER(x)		(SN_HWPERF_IS_NL3ROUTER(x) || 		\
+					 	SN_HWPERF_IS_NL4ROUTER(x) || 	\
+					 	SN_HWPERF_IS_OLDROUTER(x))
+#define SN_HWPERF_FOREIGN(x)		((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
+#define SN_HWPERF_SAME_OBJTYPE(x,y)	((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
+					(SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
+					(SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
+
+/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
+struct sn_hwperf_port_info {
+	u32 port;
+	u32 conn_id;
+	u32 conn_port;
+};
+
+/* for HWPERF_{GET,SET}_MMRS */
+struct sn_hwperf_data {
+	u64 addr;
+	u64 data;
+};
+
+/* user ioctl() argument, see below */
+struct sn_hwperf_ioctl_args {
+        u64 arg;		/* argument, usually an object id */
+        u64 sz;                 /* size of transfer */
+        void *ptr;              /* pointer to source/target */
+        u32 v0;			/* second return value */
+};
+
+/*
+ * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
+ * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
+ * to call SAL, and whether to use an interprocessor interrupt
+ * or task migration in order to do so. If the CPU specified is
+ * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
+ */
+#define SN_HWPERF_ARG_ANY_CPU		0x7fffffffUL
+#define SN_HWPERF_ARG_CPU_MASK		0x7fffffff00000000ULL
+#define SN_HWPERF_ARG_USE_IPI_MASK	0x8000000000000000ULL
+#define SN_HWPERF_ARG_OBJID_MASK	0x00000000ffffffffULL
+
+/* 
+ * ioctl requests on the "sn_hwperf" misc device that call SAL.
+ */
+#define SN_HWPERF_OP_MEM_COPYIN		0x1000
+#define SN_HWPERF_OP_MEM_COPYOUT	0x2000
+#define SN_HWPERF_OP_MASK		0x0fff
+
+/*
+ * Determine mem requirement.
+ * arg	don't care
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define	SN_HWPERF_GET_HEAPSIZE		1
+
+/*
+ * Install mem for SAL drvr
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to buffer for scratch area
+ */
+#define SN_HWPERF_INSTALL_HEAP		2
+
+/*
+ * Determine number of objects
+ * arg	don't care
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_COUNT		(10|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Determine object "distance", relative to a cpu. This operation can
+ * execute on a designated logical cpu number, using either an IPI or
+ * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg	bitmap of IPI flag, cpu number and object id
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_DISTANCE	(11|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate objects. Special case if sz == 8, returns the required
+ * buffer size.
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_ENUM_OBJECTS		(12|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate NumaLink ports for an object. Special case if sz == 8,
+ * returns the required buffer size.
+ * arg	object id
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_port_info
+ */
+#define SN_HWPERF_ENUM_PORTS		(13|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * SET/GET memory mapped registers. These operations can execute
+ * on a designated logical cpu number, using either an IPI or via
+ * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg	bitmap of ipi flag, cpu number and object id
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_data
+ */
+#define SN_HWPERF_SET_MMRS		(14|SN_HWPERF_OP_MEM_COPYIN)
+#define SN_HWPERF_GET_MMRS		(15|SN_HWPERF_OP_MEM_COPYOUT| \
+					    SN_HWPERF_OP_MEM_COPYIN)
+/*
+ * Lock a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_ACQUIRE		16
+
+/*
+ * Unlock a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_RELEASE		17
+
+/*
+ * Break a lock on a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_FORCE_RELEASE		18
+
+/*
+ * ioctl requests on "sn_hwperf" that do not call SAL
+ */
+
+/*
+ * get cpu info as an array of hwperf_object_info_t. 
+ * id is logical CPU number, name is description, location
+ * is geoid (e.g. 001c04#1c). Special case if sz == 8,
+ * returns the required buffer size.
+ *
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_GET_CPU_INFO		(100|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given an object id, return it's node number (aka cnode).
+ * arg	object id
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_GET_OBJ_NODE		(101|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given a node number (cnode), return it's nasid.
+ * arg	ordinal node number (aka cnodeid)
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_GET_NODE_NASID	(102|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given a node id, determine the id of the nearest node with CPUs
+ * and the id of the nearest node that has memory. The argument
+ * node would normally be a "headless" node, e.g. an "IO node".
+ * Return 0 on success.
+ */
+extern int sn_hwperf_get_nearest_node(cnodeid_t node,
+	cnodeid_t *near_mem, cnodeid_t *near_cpu);
+
+/* return codes */
+#define SN_HWPERF_OP_OK			0
+#define SN_HWPERF_OP_NOMEM		1
+#define SN_HWPERF_OP_NO_PERM		2
+#define SN_HWPERF_OP_IO_ERROR		3
+#define SN_HWPERF_OP_BUSY		4
+#define SN_HWPERF_OP_RECONFIGURE	253
+#define SN_HWPERF_OP_INVAL		254
+
+int sn_topology_open(struct inode *inode, struct file *file);
+int sn_topology_release(struct inode *inode, struct file *file);
+#endif				/* SN_HWPERF_H */
diff --git a/arch/ia64/include/asm/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h
new file mode 100644
index 00000000000..a676dd9ace3
--- /dev/null
+++ b/arch/ia64/include/asm/sn/sn_cpuid.h
@@ -0,0 +1,132 @@
+/* 
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_SN_CPUID_H
+#define _ASM_IA64_SN_SN_CPUID_H
+
+#include <linux/smp.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/intrinsics.h>
+
+
+/*
+ * Functions for converting between cpuids, nodeids and NASIDs.
+ * 
+ * These are for SGI platforms only.
+ *
+ */
+
+
+
+
+/*
+ *  Definitions of terms (these definitions are for IA64 ONLY. Other architectures
+ *  use cpuid/cpunum quite defferently):
+ *
+ *	   CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
+ *		the cpu. The value cpuid has no significance on IA64 other than
+ *		the boot cpu is 0.
+ *			smp_processor_id() returns the cpuid of the current cpu.
+ *
+ * 	   CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
+ *		This is the same as 31:24 of the processor LID register
+ *			hard_smp_processor_id()- cpu_physical_id of current processor
+ *			cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
+ *			cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid> 
+ *				* not real efficient - don't use in perf critical code
+ *
+ *         SLICE - a number in the range of 0 - 3 (typically) that represents the
+ *		cpu number on a brick.
+ *
+ *	   SUBNODE - (almost obsolete) the number of the FSB that a cpu is
+ *		connected to. This is also the same as the PI number. Usually 0 or 1.
+ *
+ *	NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no 
+ *	significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
+ *
+ *
+ * The macros convert between cpu physical ids & slice/nasid/cnodeid.
+ * These terms are described below:
+ *
+ *
+ * Brick
+ *          -----   -----           -----   -----       CPU
+ *          | 0 |   | 1 |           | 0 |   | 1 |       SLICE
+ *          -----   -----           -----   -----
+ *            |       |               |       |
+ *            |       |               |       |
+ *          0 |       | 2           0 |       | 2       FSB SLOT
+ *             -------                 -------  
+ *                |                       |
+ *                |                       |
+ *                |                       |
+ *             ------------      -------------
+ *             |          |      |           |
+ *             |    SHUB  |      |   SHUB    |        NASID   (0..MAX_NASIDS)
+ *             |          |----- |           |        CNODEID (0..num_compact_nodes-1)
+ *             |          |      |           |
+ *             |          |      |           |
+ *             ------------      -------------
+ *                   |                 |
+ *                           
+ *
+ */
+
+#define get_node_number(addr)			NASID_GET(addr)
+
+/*
+ * NOTE: on non-MP systems, only cpuid 0 exists
+ */
+
+extern short physical_node_map[];	/* indexed by nasid to get cnode */
+
+/*
+ * Macros for retrieving info about current cpu
+ */
+#define get_nasid()	(sn_nodepda->phys_cpuid[smp_processor_id()].nasid)
+#define get_subnode()	(sn_nodepda->phys_cpuid[smp_processor_id()].subnode)
+#define get_slice()	(sn_nodepda->phys_cpuid[smp_processor_id()].slice)
+#define get_cnode()	(sn_nodepda->phys_cpuid[smp_processor_id()].cnode)
+#define get_sapicid()	((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+
+/*
+ * Macros for retrieving info about an arbitrary cpu
+ *	cpuid - logical cpu id
+ */
+#define cpuid_to_nasid(cpuid)		(sn_nodepda->phys_cpuid[cpuid].nasid)
+#define cpuid_to_subnode(cpuid)		(sn_nodepda->phys_cpuid[cpuid].subnode)
+#define cpuid_to_slice(cpuid)		(sn_nodepda->phys_cpuid[cpuid].slice)
+
+
+/*
+ * Dont use the following in performance critical code. They require scans
+ * of potentially large tables.
+ */
+extern int nasid_slice_to_cpuid(int, int);
+
+/*
+ * cnodeid_to_nasid - convert a cnodeid to a NASID
+ */
+#define cnodeid_to_nasid(cnodeid)	(sn_cnodeid_to_nasid[cnodeid])
+ 
+/*
+ * nasid_to_cnodeid - convert a NASID to a cnodeid
+ */
+#define nasid_to_cnodeid(nasid)		(physical_node_map[nasid])
+
+/*
+ * partition_coherence_id - get the coherence ID of the current partition
+ */
+extern u8 sn_coherency_id;
+#define partition_coherence_id()	(sn_coherency_id)
+
+#endif /* _ASM_IA64_SN_SN_CPUID_H */
+
diff --git a/arch/ia64/include/asm/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h
new file mode 100644
index 00000000000..8e83ac117ac
--- /dev/null
+++ b/arch/ia64/include/asm/sn/sn_feature_sets.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_IA64_SN_FEATURE_SETS_H
+#define _ASM_IA64_SN_FEATURE_SETS_H
+
+/*
+ * SN PROM Features
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005-2006 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+
+/* --------------------- PROM Features -----------------------------*/
+extern int sn_prom_feature_available(int id);
+
+#define MAX_PROM_FEATURE_SETS			2
+
+/*
+ * The following defines features that may or may not be supported by the
+ * current PROM. The OS uses sn_prom_feature_available(feature) to test for
+ * the presence of a PROM feature. Down rev (old) PROMs will always test
+ * "false" for new features.
+ *
+ * Use:
+ * 		if (sn_prom_feature_available(PRF_XXX))
+ * 			...
+ */
+
+#define PRF_PAL_CACHE_FLUSH_SAFE	0
+#define PRF_DEVICE_FLUSH_LIST		1
+#define PRF_HOTPLUG_SUPPORT		2
+#define PRF_CPU_DISABLE_SUPPORT		3
+
+/* --------------------- OS Features -------------------------------*/
+
+/*
+ * The following defines OS features that are optionally present in
+ * the operating system.
+ * During boot, PROM is notified of these features via a series of calls:
+ *
+ * 		ia64_sn_set_os_feature(feature1);
+ *
+ * Once enabled, a feature cannot be disabled.
+ *
+ * By default, features are disabled unless explicitly enabled.
+ *
+ * These defines must be kept in sync with the corresponding
+ * PROM definitions in feature_sets.h.
+ */
+#define  OSF_MCA_SLV_TO_OS_INIT_SLV	0
+#define  OSF_FEAT_LOG_SBES		1
+#define  OSF_ACPI_ENABLE		2
+#define  OSF_PCISEGMENT_ENABLE		3
+
+
+#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h
new file mode 100644
index 00000000000..57e649d388b
--- /dev/null
+++ b/arch/ia64/include/asm/sn/sn_sal.h
@@ -0,0 +1,1188 @@
+#ifndef _ASM_IA64_SN_SN_SAL_H
+#define _ASM_IA64_SN_SN_SAL_H
+
+/*
+ * System Abstraction Layer definitions for IA64
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+
+#include <asm/sal.h>
+#include <asm/sn/sn_cpuid.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/geo.h>
+#include <asm/sn/nodepda.h>
+#include <asm/sn/shub_mmr.h>
+
+// SGI Specific Calls
+#define  SN_SAL_POD_MODE                           0x02000001
+#define  SN_SAL_SYSTEM_RESET                       0x02000002
+#define  SN_SAL_PROBE                              0x02000003
+#define  SN_SAL_GET_MASTER_NASID                   0x02000004
+#define	 SN_SAL_GET_KLCONFIG_ADDR		   0x02000005
+#define  SN_SAL_LOG_CE				   0x02000006
+#define  SN_SAL_REGISTER_CE			   0x02000007
+#define  SN_SAL_GET_PARTITION_ADDR		   0x02000009
+#define  SN_SAL_XP_ADDR_REGION			   0x0200000f
+#define  SN_SAL_NO_FAULT_ZONE_VIRTUAL		   0x02000010
+#define  SN_SAL_NO_FAULT_ZONE_PHYSICAL		   0x02000011
+#define  SN_SAL_PRINT_ERROR			   0x02000012
+#define  SN_SAL_REGISTER_PMI_HANDLER		   0x02000014
+#define  SN_SAL_SET_ERROR_HANDLING_FEATURES	   0x0200001a	// reentrant
+#define  SN_SAL_GET_FIT_COMPT			   0x0200001b	// reentrant
+#define  SN_SAL_GET_SAPIC_INFO                     0x0200001d
+#define  SN_SAL_GET_SN_INFO                        0x0200001e
+#define  SN_SAL_CONSOLE_PUTC                       0x02000021
+#define  SN_SAL_CONSOLE_GETC                       0x02000022
+#define  SN_SAL_CONSOLE_PUTS                       0x02000023
+#define  SN_SAL_CONSOLE_GETS                       0x02000024
+#define  SN_SAL_CONSOLE_GETS_TIMEOUT               0x02000025
+#define  SN_SAL_CONSOLE_POLL                       0x02000026
+#define  SN_SAL_CONSOLE_INTR                       0x02000027
+#define  SN_SAL_CONSOLE_PUTB			   0x02000028
+#define  SN_SAL_CONSOLE_XMIT_CHARS		   0x0200002a
+#define  SN_SAL_CONSOLE_READC			   0x0200002b
+#define  SN_SAL_SYSCTL_OP			   0x02000030
+#define  SN_SAL_SYSCTL_MODID_GET	           0x02000031
+#define  SN_SAL_SYSCTL_GET                         0x02000032
+#define  SN_SAL_SYSCTL_IOBRICK_MODULE_GET          0x02000033
+#define  SN_SAL_SYSCTL_IO_PORTSPEED_GET            0x02000035
+#define  SN_SAL_SYSCTL_SLAB_GET                    0x02000036
+#define  SN_SAL_BUS_CONFIG		   	   0x02000037
+#define  SN_SAL_SYS_SERIAL_GET			   0x02000038
+#define  SN_SAL_PARTITION_SERIAL_GET		   0x02000039
+#define  SN_SAL_SYSCTL_PARTITION_GET               0x0200003a
+#define  SN_SAL_SYSTEM_POWER_DOWN		   0x0200003b
+#define  SN_SAL_GET_MASTER_BASEIO_NASID		   0x0200003c
+#define  SN_SAL_COHERENCE                          0x0200003d
+#define  SN_SAL_MEMPROTECT                         0x0200003e
+#define  SN_SAL_SYSCTL_FRU_CAPTURE		   0x0200003f
+
+#define  SN_SAL_SYSCTL_IOBRICK_PCI_OP		   0x02000042	// reentrant
+#define	 SN_SAL_IROUTER_OP			   0x02000043
+#define  SN_SAL_SYSCTL_EVENT                       0x02000044
+#define  SN_SAL_IOIF_INTERRUPT			   0x0200004a
+#define  SN_SAL_HWPERF_OP			   0x02000050   // lock
+#define  SN_SAL_IOIF_ERROR_INTERRUPT		   0x02000051
+#define  SN_SAL_IOIF_PCI_SAFE			   0x02000052
+#define  SN_SAL_IOIF_SLOT_ENABLE		   0x02000053
+#define  SN_SAL_IOIF_SLOT_DISABLE		   0x02000054
+#define  SN_SAL_IOIF_GET_HUBDEV_INFO		   0x02000055
+#define  SN_SAL_IOIF_GET_PCIBUS_INFO		   0x02000056
+#define  SN_SAL_IOIF_GET_PCIDEV_INFO		   0x02000057
+#define  SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST	   0x02000058	// deprecated
+#define  SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST	   0x0200005a
+
+#define SN_SAL_IOIF_INIT			   0x0200005f
+#define SN_SAL_HUB_ERROR_INTERRUPT		   0x02000060
+#define SN_SAL_BTE_RECOVER			   0x02000061
+#define SN_SAL_RESERVED_DO_NOT_USE		   0x02000062
+#define SN_SAL_IOIF_GET_PCI_TOPOLOGY		   0x02000064
+
+#define  SN_SAL_GET_PROM_FEATURE_SET		   0x02000065
+#define  SN_SAL_SET_OS_FEATURE_SET		   0x02000066
+#define  SN_SAL_INJECT_ERROR			   0x02000067
+#define  SN_SAL_SET_CPU_NUMBER			   0x02000068
+
+#define  SN_SAL_KERNEL_LAUNCH_EVENT		   0x02000069
+
+/*
+ * Service-specific constants
+ */
+
+/* Console interrupt manipulation */
+	/* action codes */
+#define SAL_CONSOLE_INTR_OFF    0       /* turn the interrupt off */
+#define SAL_CONSOLE_INTR_ON     1       /* turn the interrupt on */
+#define SAL_CONSOLE_INTR_STATUS 2	/* retrieve the interrupt status */
+	/* interrupt specification & status return codes */
+#define SAL_CONSOLE_INTR_XMIT	1	/* output interrupt */
+#define SAL_CONSOLE_INTR_RECV	2	/* input interrupt */
+
+/* interrupt handling */
+#define SAL_INTR_ALLOC		1
+#define SAL_INTR_FREE		2
+#define SAL_INTR_REDIRECT	3
+
+/*
+ * operations available on the generic SN_SAL_SYSCTL_OP
+ * runtime service
+ */
+#define SAL_SYSCTL_OP_IOBOARD		0x0001  /*  retrieve board type */
+#define SAL_SYSCTL_OP_TIO_JLCK_RST      0x0002  /* issue TIO clock reset */
+
+/*
+ * IRouter (i.e. generalized system controller) operations
+ */
+#define SAL_IROUTER_OPEN	0	/* open a subchannel */
+#define SAL_IROUTER_CLOSE	1	/* close a subchannel */
+#define SAL_IROUTER_SEND	2	/* send part of an IRouter packet */
+#define SAL_IROUTER_RECV	3	/* receive part of an IRouter packet */
+#define SAL_IROUTER_INTR_STATUS	4	/* check the interrupt status for
+					 * an open subchannel
+					 */
+#define SAL_IROUTER_INTR_ON	5	/* enable an interrupt */
+#define SAL_IROUTER_INTR_OFF	6	/* disable an interrupt */
+#define SAL_IROUTER_INIT	7	/* initialize IRouter driver */
+
+/* IRouter interrupt mask bits */
+#define SAL_IROUTER_INTR_XMIT	SAL_CONSOLE_INTR_XMIT
+#define SAL_IROUTER_INTR_RECV	SAL_CONSOLE_INTR_RECV
+
+/*
+ * Error Handling Features
+ */
+#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV	0x1	// obsolete
+#define SAL_ERR_FEAT_LOG_SBES			0x2	// obsolete
+#define SAL_ERR_FEAT_MFR_OVERRIDE		0x4
+#define SAL_ERR_FEAT_SBE_THRESHOLD		0xffff0000
+
+/*
+ * SAL Error Codes
+ */
+#define SALRET_MORE_PASSES	1
+#define SALRET_OK		0
+#define SALRET_NOT_IMPLEMENTED	(-1)
+#define SALRET_INVALID_ARG	(-2)
+#define SALRET_ERROR		(-3)
+
+#define SN_SAL_FAKE_PROM			   0x02009999
+
+/**
+  * sn_sal_revision - get the SGI SAL revision number
+  *
+  * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor).
+  * This routine simply extracts the major and minor values and
+  * presents them in a u32 format.
+  *
+  * For example, version 4.05 would be represented at 0x0405.
+  */
+static inline u32
+sn_sal_rev(void)
+{
+	struct ia64_sal_systab *systab = __va(efi.sal_systab);
+
+	return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor);
+}
+
+/*
+ * Returns the master console nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_console_nasid(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	/* Master console nasid is in 'v0' */
+	return ret_stuff.v0;
+}
+
+/*
+ * Returns the master baseio nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_master_baseio_nasid(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	/* Master baseio nasid is in 'v0' */
+	return ret_stuff.v0;
+}
+
+static inline void *
+ia64_sn_get_klconfig_addr(nasid_t nasid)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
+	return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
+}
+
+/*
+ * Returns the next console character.
+ */
+static inline u64
+ia64_sn_console_getc(int *ch)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);
+
+	/* character is in 'v0' */
+	*ch = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/*
+ * Read a character from the SAL console device, after a previous interrupt
+ * or poll operation has given us to know that a character is available
+ * to be read.
+ */
+static inline u64
+ia64_sn_console_readc(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);
+
+	/* character is in 'v0' */
+	return ret_stuff.v0;
+}
+
+/*
+ * Sends the given character to the console.
+ */
+static inline u64
+ia64_sn_console_putc(char ch)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Sends the given buffer to the console.
+ */
+static inline u64
+ia64_sn_console_putb(const char *buf, int len)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0; 
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0);
+
+	if ( ret_stuff.status == 0 ) {
+		return ret_stuff.v0;
+	}
+	return (u64)0;
+}
+
+/*
+ * Print a platform error record
+ */
+static inline u64
+ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Check for Platform errors
+ */
+static inline u64
+ia64_sn_plat_cpei_handler(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Set Error Handling Features	(Obsolete)
+ */
+static inline u64
+ia64_sn_plat_set_error_handling_features(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES,
+		SAL_ERR_FEAT_LOG_SBES,
+		0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Checks for console input.
+ */
+static inline u64
+ia64_sn_console_check(int *result)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);
+
+	/* result is in 'v0' */
+	*result = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/*
+ * Checks console interrupt status
+ */
+static inline u64
+ia64_sn_console_intr_status(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 0, SAL_CONSOLE_INTR_STATUS,
+		 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status == 0) {
+	    return ret_stuff.v0;
+	}
+	
+	return 0;
+}
+
+/*
+ * Enable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_enable(u64 intr)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 intr, SAL_CONSOLE_INTR_ON,
+		 0, 0, 0, 0, 0);
+}
+
+/*
+ * Disable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_disable(u64 intr)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 intr, SAL_CONSOLE_INTR_OFF,
+		 0, 0, 0, 0, 0);
+}
+
+/*
+ * Sends a character buffer to the console asynchronously.
+ */
+static inline u64
+ia64_sn_console_xmit_chars(char *buf, int len)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
+		 (u64)buf, (u64)len,
+		 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status == 0) {
+	    return ret_stuff.v0;
+	}
+
+	return 0;
+}
+
+/*
+ * Returns the iobrick module Id
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);
+
+	/* result is in 'v0' */
+	*result = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/**
+ * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
+ *
+ * SN_SAL_POD_MODE actually takes an argument, but it's always
+ * 0 when we call it from the kernel, so we don't have to expose
+ * it to the caller.
+ */
+static inline u64
+ia64_sn_pod_mode(void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+	return isrv.v0;
+}
+
+/**
+ * ia64_sn_probe_mem - read from memory safely
+ * @addr: address to probe
+ * @size: number bytes to read (1,2,4,8)
+ * @data_ptr: address to store value read by probe (-1 returned if probe fails)
+ *
+ * Call into the SAL to do a memory read.  If the read generates a machine
+ * check, this routine will recover gracefully and return -1 to the caller.
+ * @addr is usually a kernel virtual address in uncached space (i.e. the
+ * address starts with 0xc), but if called in physical mode, @addr should
+ * be a physical address.
+ *
+ * Return values:
+ *  0 - probe successful
+ *  1 - probe failed (generated MCA)
+ *  2 - Bad arg
+ * <0 - PAL error
+ */
+static inline u64
+ia64_sn_probe_mem(long addr, long size, void *data_ptr)
+{
+	struct ia64_sal_retval isrv;
+
+	SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);
+
+	if (data_ptr) {
+		switch (size) {
+		case 1:
+			*((u8*)data_ptr) = (u8)isrv.v0;
+			break;
+		case 2:
+			*((u16*)data_ptr) = (u16)isrv.v0;
+			break;
+		case 4:
+			*((u32*)data_ptr) = (u32)isrv.v0;
+			break;
+		case 8:
+			*((u64*)data_ptr) = (u64)isrv.v0;
+			break;
+		default:
+			isrv.status = 2;
+		}
+	}
+	return isrv.status;
+}
+
+/*
+ * Retrieve the system serial number as an ASCII string.
+ */
+static inline u64
+ia64_sn_sys_serial_get(char *buf)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+extern char sn_system_serial_number_string[];
+extern u64 sn_partition_serial_number;
+
+static inline char *
+sn_system_serial_number(void) {
+	if (sn_system_serial_number_string[0]) {
+		return(sn_system_serial_number_string);
+	} else {
+		ia64_sn_sys_serial_get(sn_system_serial_number_string);
+		return(sn_system_serial_number_string);
+	}
+}
+	
+
+/*
+ * Returns a unique id number for this system and partition (suitable for
+ * use with license managers), based in part on the system serial number.
+ */
+static inline u64
+ia64_sn_partition_serial_get(void)
+{
+	struct ia64_sal_retval ret_stuff;
+	ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0,
+				   0, 0, 0, 0, 0, 0);
+	if (ret_stuff.status != 0)
+	    return 0;
+	return ret_stuff.v0;
+}
+
+static inline u64
+sn_partition_serial_number_val(void) {
+	if (unlikely(sn_partition_serial_number == 0)) {
+		sn_partition_serial_number = ia64_sn_partition_serial_get();
+	}
+	return sn_partition_serial_number;
+}
+
+/*
+ * Returns the partition id of the nasid passed in as an argument,
+ * or INVALID_PARTID if the partition id cannot be retrieved.
+ */
+static inline partid_t
+ia64_sn_sysctl_partition_get(nasid_t nasid)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
+		0, 0, 0, 0, 0, 0);
+	if (ret_stuff.status != 0)
+	    return -1;
+	return ((partid_t)ret_stuff.v0);
+}
+
+/*
+ * Returns the physical address of the partition's reserved page through
+ * an iterative number of calls.
+ *
+ * On first call, 'cookie' and 'len' should be set to 0, and 'addr'
+ * set to the nasid of the partition whose reserved page's address is
+ * being sought.
+ * On subsequent calls, pass the values, that were passed back on the
+ * previous call.
+ *
+ * While the return status equals SALRET_MORE_PASSES, keep calling
+ * this function after first copying 'len' bytes starting at 'addr'
+ * into 'buf'. Once the return status equals SALRET_OK, 'addr' will
+ * be the physical address of the partition's reserved page. If the
+ * return status equals neither of these, an error as occurred.
+ */
+static inline s64
+sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)
+{
+	struct ia64_sal_retval rv;
+	ia64_sal_oemcall_reentrant(&rv, SN_SAL_GET_PARTITION_ADDR, *cookie,
+				   *addr, buf, *len, 0, 0, 0);
+	*cookie = rv.v0;
+	*addr = rv.v1;
+	*len = rv.v2;
+	return rv.status;
+}
+
+/*
+ * Register or unregister a physical address range being referenced across
+ * a partition boundary for which certain SAL errors should be scanned for,
+ * cleaned up and ignored.  This is of value for kernel partitioning code only.
+ * Values for the operation argument:
+ *	1 = register this address range with SAL
+ *	0 = unregister this address range with SAL
+ * 
+ * SAL maintains a reference count on an address range in case it is registered
+ * multiple times.
+ * 
+ * On success, returns the reference count of the address range after the SAL
+ * call has performed the current registration/unregistration.  Returns a
+ * negative value if an error occurred.
+ */
+static inline int
+sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
+{
+	struct ia64_sal_retval ret_stuff;
+	ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len,
+			 (u64)operation, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Register or unregister an instruction range for which SAL errors should
+ * be ignored.  If an error occurs while in the registered range, SAL jumps
+ * to return_addr after ignoring the error.  Values for the operation argument:
+ *	1 = register this instruction range with SAL
+ *	0 = unregister this instruction range with SAL
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
+			 int virtual, int operation)
+{
+	struct ia64_sal_retval ret_stuff;
+	u64 call;
+	if (virtual) {
+		call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
+	} else {
+		call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
+	}
+	ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr,
+			 (u64)1, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Register or unregister a function to handle a PMI received by a CPU.
+ * Before calling the registered handler, SAL sets r1 to the value that
+ * was passed in as the global_pointer.
+ *
+ * If the handler pointer is NULL, then the currently registered handler
+ * will be unregistered.
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_register_pmi_handler(u64 handler, u64 global_pointer)
+{
+	struct ia64_sal_retval ret_stuff;
+	ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler,
+			 global_pointer, 0, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Change or query the coherence domain for this partition. Each cpu-based
+ * nasid is represented by a bit in an array of 64-bit words:
+ *      0 = not in this partition's coherency domain
+ *      1 = in this partition's coherency domain
+ *
+ * It is not possible for the local system's nasids to be removed from
+ * the coherency domain.  Purpose of the domain arguments:
+ *      new_domain = set the coherence domain to the given nasids
+ *      old_domain = return the current coherence domain
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_change_coherence(u64 *new_domain, u64 *old_domain)
+{
+	struct ia64_sal_retval ret_stuff;
+	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain,
+				(u64)old_domain, 0, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Change memory access protections for a physical address range.
+ * nasid_array is not used on Altix, but may be in future architectures.
+ * Available memory protection access classes are defined after the function.
+ */
+static inline int
+sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
+				(u64)nasid_array, perms, 0, 0, 0);
+	return ret_stuff.status;
+}
+#define SN_MEMPROT_ACCESS_CLASS_0		0x14a080
+#define SN_MEMPROT_ACCESS_CLASS_1		0x2520c2
+#define SN_MEMPROT_ACCESS_CLASS_2		0x14a1ca
+#define SN_MEMPROT_ACCESS_CLASS_3		0x14a290
+#define SN_MEMPROT_ACCESS_CLASS_6		0x084080
+#define SN_MEMPROT_ACCESS_CLASS_7		0x021080
+
+/*
+ * Turns off system power.
+ */
+static inline void
+ia64_sn_power_down(void)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
+	while(1)
+		cpu_relax();
+	/* never returns */
+}
+
+/**
+ * ia64_sn_fru_capture - tell the system controller to capture hw state
+ *
+ * This routine will call the SAL which will tell the system controller(s)
+ * to capture hw mmr information from each SHub in the system.
+ */
+static inline u64
+ia64_sn_fru_capture(void)
+{
+        struct ia64_sal_retval isrv;
+        SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
+        if (isrv.status)
+                return 0;
+        return isrv.v0;
+}
+
+/*
+ * Performs an operation on a PCI bus or slot -- power up, power down
+ * or reset.
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, 
+			      u64 bus, char slot, 
+			      u64 action)
+{
+	struct ia64_sal_retval rv = {0, 0, 0, 0};
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
+		 bus, (u64) slot, 0, 0);
+	if (rv.status)
+	    	return rv.v0;
+	return 0;
+}
+
+
+/*
+ * Open a subchannel for sending arbitrary data to the system
+ * controller network via the system controller device associated with
+ * 'nasid'.  Return the subchannel number or a negative error code.
+ */
+static inline int
+ia64_sn_irtr_open(nasid_t nasid)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
+			   0, 0, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Close system controller subchannel 'subch' previously opened on 'nasid'.
+ */
+static inline int
+ia64_sn_irtr_close(nasid_t nasid, int subch)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
+			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Read data from system controller associated with 'nasid' on
+ * subchannel 'subch'.  The buffer to be filled is pointed to by
+ * 'buf', and its capacity is in the integer pointed to by 'len'.  The
+ * referent of 'len' is set to the number of bytes read by the SAL
+ * call.  The return value is either SALRET_OK (for bytes read) or
+ * SALRET_ERROR (for error or "no data available").
+ */
+static inline int
+ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
+			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+			   0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Write data to the system controller network via the system
+ * controller associated with 'nasid' on suchannel 'subch'.  The
+ * buffer to be written out is pointed to by 'buf', and 'len' is the
+ * number of bytes to be written.  The return value is either the
+ * number of bytes written (which could be zero) or a negative error
+ * code.
+ */
+static inline int
+ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
+			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+			   0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Check whether any interrupts are pending for the system controller
+ * associated with 'nasid' and its subchannel 'subch'.  The return
+ * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
+ * SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr(nasid_t nasid, int subch)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
+			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Enable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
+			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Disable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
+			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Set up a node as the point of contact for system controller
+ * environmental event delivery.
+ */
+static inline int
+ia64_sn_sysctl_event_init(nasid_t nasid)
+{
+        struct ia64_sal_retval rv;
+        SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid,
+			   0, 0, 0, 0, 0, 0);
+        return (int) rv.v0;
+}
+
+/*
+ * Ask the system controller on the specified nasid to reset
+ * the CX corelet clock.  Only valid on TIO nodes.
+ */
+static inline int
+ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
+			nasid, 0, 0, 0, 0, 0);
+	if (rv.status != 0)
+		return (int)rv.status;
+	if (rv.v0 != 0)
+		return (int)rv.v0;
+
+	return 0;
+}
+
+/*
+ * Get the associated ioboard type for a given nasid.
+ */
+static inline s64
+ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
+			   nasid, 0, 0, 0, 0, 0);
+	if (isrv.v0 != 0) {
+		*ioboard = isrv.v0;
+		return isrv.status;
+	}
+	if (isrv.v1 != 0) {
+		*ioboard = isrv.v1;
+		return isrv.status;
+	}
+
+	return isrv.status;
+}
+
+/**
+ * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
+ * @nasid: NASID of node to read
+ * @index: FIT entry index to be retrieved (0..n)
+ * @fitentry: 16 byte buffer where FIT entry will be stored.
+ * @banbuf: optional buffer for retrieving banner
+ * @banlen: length of banner buffer
+ *
+ * Access to the physical PROM chips needs to be serialized since reads and
+ * writes can't occur at the same time, so we need to call into the SAL when
+ * we want to look at the FIT entries on the chips.
+ *
+ * Returns:
+ *	%SALRET_OK if ok
+ *	%SALRET_INVALID_ARG if index too big
+ *	%SALRET_NOT_IMPLEMENTED if running on older PROM
+ *	??? if nasid invalid OR banner buffer not large enough
+ */
+static inline int
+ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
+		      u64 banlen)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
+			banbuf, banlen, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Initialize the SAL components of the system controller
+ * communication driver; specifically pass in a sizable buffer that
+ * can be used for allocation of subchannel queues as new subchannels
+ * are opened.  "buf" points to the buffer, and "len" specifies its
+ * length.
+ */
+static inline int
+ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
+			   (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Returns the nasid, subnode & slice corresponding to a SAPIC ID
+ *
+ *  In:
+ *	arg0 - SN_SAL_GET_SAPIC_INFO
+ *	arg1 - sapicid (lid >> 16) 
+ *  Out:
+ *	v0 - nasid
+ *	v1 - subnode
+ *	v2 - slice
+ */
+static inline u64
+ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+		if (nasid) *nasid = sapicid & 0xfff;
+		if (subnode) *subnode = (sapicid >> 13) & 1;
+		if (slice) *slice = (sapicid >> 12) & 3;
+		return 0;
+	}
+/***** END HACK *******/
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	if (nasid) *nasid = (int) ret_stuff.v0;
+	if (subnode) *subnode = (int) ret_stuff.v1;
+	if (slice) *slice = (int) ret_stuff.v2;
+	return 0;
+}
+ 
+/*
+ * Returns information about the HUB/SHUB.
+ *  In:
+ *	arg0 - SN_SAL_GET_SN_INFO
+ * 	arg1 - 0 (other values reserved for future use)
+ *  Out:
+ *	v0 
+ *		[7:0]   - shub type (0=shub1, 1=shub2)
+ *		[15:8]  - Log2 max number of nodes in entire system (includes
+ *			  C-bricks, I-bricks, etc)
+ *		[23:16] - Log2 of nodes per sharing domain			 
+ * 		[31:24] - partition ID
+ * 		[39:32] - coherency_id
+ * 		[47:40] - regionsize
+ *	v1 
+ *		[15:0]  - nasid mask (ex., 0x7ff for 11 bit nasid)
+ *	 	[23:15] - bit position of low nasid bit
+ */
+static inline u64
+ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, 
+		u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+		int nasid = get_sapicid() & 0xfff;
+#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL
+#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48
+		if (shubtype) *shubtype = 0;
+		if (nasid_bitmask) *nasid_bitmask = 0x7ff;
+		if (nasid_shift) *nasid_shift = 38;
+		if (systemsize) *systemsize = 10;
+		if (sharing_domain_size) *sharing_domain_size = 8;
+		if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
+		if (coher) *coher = nasid >> 9;
+		if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
+			SH_SHUB_ID_NODES_PER_BIT_SHFT;
+		return 0;
+	}
+/***** END HACK *******/
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
+	if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
+	if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
+	if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
+	if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
+	if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
+	if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
+	if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
+	return 0;
+}
+ 
+/*
+ * This is the access point to the Altix PROM hardware performance
+ * and status monitoring interface. For info on using this, see
+ * arch/ia64/include/asm/sn/sn2/sn_hwperf.h
+ */
+static inline int
+ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
+                  u64 a3, u64 a4, int *v0)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
+		opcode, a0, a1, a2, a3, a4);
+	if (v0)
+		*v0 = (int) rv.v0;
+	return (int) rv.status;
+}
+
+static inline int
+ia64_sn_ioif_get_pci_topology(u64 buf, u64 len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * BTE error recovery is implemented in SAL
+ */
+static inline int
+ia64_sn_bte_recovery(nasid_t nasid)
+{
+	struct ia64_sal_retval rv;
+
+	rv.status = 0;
+	SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0);
+	if (rv.status == SALRET_NOT_IMPLEMENTED)
+		return 0;
+	return (int) rv.status;
+}
+
+static inline int
+ia64_sn_is_fake_prom(void)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0);
+	return (rv.status == 0);
+}
+
+static inline int
+ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set)
+{
+	struct ia64_sal_retval rv;
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0);
+	if (rv.status != 0)
+		return rv.status;
+	*feature_set = rv.v0;
+	return 0;
+}
+
+static inline int
+ia64_sn_set_os_feature(int feature)
+{
+	struct ia64_sal_retval rv;
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0);
+	return rv.status;
+}
+
+static inline int
+sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
+				(u64)ecc, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+static inline int
+ia64_sn_set_cpu_number(int cpu)
+{
+	struct ia64_sal_retval rv;
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0);
+	return rv.status;
+}
+static inline int
+ia64_sn_kernel_launch_event(void)
+{
+ 	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0);
+	return rv.status;
+}
+#endif /* _ASM_IA64_SN_SN_SAL_H */
diff --git a/arch/ia64/include/asm/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h
new file mode 100644
index 00000000000..666222d7f0f
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tioca.h
@@ -0,0 +1,596 @@
+#ifndef _ASM_IA64_SN_TIO_TIOCA_H
+#define _ASM_IA64_SN_TIO_TIOCA_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+#define TIOCA_PART_NUM	0xE020
+#define TIOCA_MFGR_NUM	0x24
+#define TIOCA_REV_A	0x1
+
+/*
+ * Register layout for TIO:CA.  See below for bitmasks for each register.
+ */
+
+struct tioca {
+	u64	ca_id;				/* 0x000000 */
+	u64	ca_control1;			/* 0x000008 */
+	u64	ca_control2;			/* 0x000010 */
+	u64	ca_status1;			/* 0x000018 */
+	u64	ca_status2;			/* 0x000020 */
+	u64	ca_gart_aperature;		/* 0x000028 */
+	u64	ca_gfx_detach;			/* 0x000030 */
+	u64	ca_inta_dest_addr;		/* 0x000038 */
+	u64	ca_intb_dest_addr;		/* 0x000040 */
+	u64	ca_err_int_dest_addr;		/* 0x000048 */
+	u64	ca_int_status;			/* 0x000050 */
+	u64	ca_int_status_alias;		/* 0x000058 */
+	u64	ca_mult_error;			/* 0x000060 */
+	u64	ca_mult_error_alias;		/* 0x000068 */
+	u64	ca_first_error;			/* 0x000070 */
+	u64	ca_int_mask;			/* 0x000078 */
+	u64	ca_crm_pkterr_type;		/* 0x000080 */
+	u64	ca_crm_pkterr_type_alias;	/* 0x000088 */
+	u64	ca_crm_ct_error_detail_1;	/* 0x000090 */
+	u64	ca_crm_ct_error_detail_2;	/* 0x000098 */
+	u64	ca_crm_tnumto;			/* 0x0000A0 */
+	u64	ca_gart_err;			/* 0x0000A8 */
+	u64	ca_pcierr_type;			/* 0x0000B0 */
+	u64	ca_pcierr_addr;			/* 0x0000B8 */
+
+	u64	ca_pad_0000C0[3];		/* 0x0000{C0..D0} */
+
+	u64	ca_pci_rd_buf_flush;		/* 0x0000D8 */
+	u64	ca_pci_dma_addr_extn;		/* 0x0000E0 */
+	u64	ca_agp_dma_addr_extn;		/* 0x0000E8 */
+	u64	ca_force_inta;			/* 0x0000F0 */
+	u64	ca_force_intb;			/* 0x0000F8 */
+	u64	ca_debug_vector_sel;		/* 0x000100 */
+	u64	ca_debug_mux_core_sel;		/* 0x000108 */
+	u64	ca_debug_mux_pci_sel;		/* 0x000110 */
+	u64	ca_debug_domain_sel;		/* 0x000118 */
+
+	u64	ca_pad_000120[28];		/* 0x0001{20..F8} */
+
+	u64	ca_gart_ptr_table;		/* 0x200 */
+	u64	ca_gart_tlb_addr[8];		/* 0x2{08..40} */
+};
+
+/*
+ * Mask/shift definitions for TIO:CA registers.  The convention here is
+ * to mainly use the names as they appear in the "TIO AEGIS Programmers'
+ * Reference" with a CA_ prefix added.  Some exceptions were made to fix
+ * duplicate field names or to generalize fields that are common to
+ * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for
+ * example).
+ *
+ * Fields consisting of a single bit have a single #define have a single
+ * macro declaration to mask the bit.  Fields consisting of multiple bits
+ * have two declarations: one to mask the proper bits in a register, and 
+ * a second with the suffix "_SHFT" to identify how far the mask needs to
+ * be shifted right to get its base value.
+ */
+
+/* ==== ca_control1 */
+#define CA_SYS_BIG_END			(1ull << 0)
+#define CA_DMA_AGP_SWAP			(1ull << 1)
+#define CA_DMA_PCI_SWAP			(1ull << 2)
+#define CA_PIO_IO_SWAP			(1ull << 3)
+#define CA_PIO_MEM_SWAP			(1ull << 4)
+#define CA_GFX_WR_SWAP			(1ull << 5)
+#define CA_AGP_FW_ENABLE		(1ull << 6)
+#define CA_AGP_CAL_CYCLE		(0x7ull << 7)
+#define CA_AGP_CAL_CYCLE_SHFT		7
+#define CA_AGP_CAL_PRSCL_BYP		(1ull << 10)
+#define CA_AGP_INIT_CAL_ENB		(1ull << 11)
+#define CA_INJ_ADDR_PERR		(1ull << 12)
+#define CA_INJ_DATA_PERR		(1ull << 13)
+	/* bits 15:14 unused */
+#define CA_PCIM_IO_NBE_AD		(0x7ull << 16)
+#define CA_PCIM_IO_NBE_AD_SHFT		16
+#define CA_PCIM_FAST_BTB_ENB		(1ull << 19)
+	/* bits 23:20 unused */
+#define CA_PIO_ADDR_OFFSET		(0xffull << 24)
+#define CA_PIO_ADDR_OFFSET_SHFT		24
+	/* bits 35:32 unused */
+#define CA_AGPDMA_OP_COMBDELAY		(0x1full << 36)
+#define CA_AGPDMA_OP_COMBDELAY_SHFT	36
+	/* bit 41 unused */
+#define CA_AGPDMA_OP_ENB_COMBDELAY	(1ull << 42)
+#define	CA_PCI_INT_LPCNT		(0xffull << 44)
+#define CA_PCI_INT_LPCNT_SHFT		44
+	/* bits 63:52 unused */
+
+/* ==== ca_control2 */
+#define CA_AGP_LATENCY_TO		(0xffull << 0)
+#define CA_AGP_LATENCY_TO_SHFT		0
+#define CA_PCI_LATENCY_TO		(0xffull << 8)
+#define CA_PCI_LATENCY_TO_SHFT		8
+#define CA_PCI_MAX_RETRY		(0x3ffull << 16)
+#define CA_PCI_MAX_RETRY_SHFT		16
+	/* bits 27:26 unused */
+#define CA_RT_INT_EN			(0x3ull << 28)
+#define CA_RT_INT_EN_SHFT			28
+#define CA_MSI_INT_ENB			(1ull << 30)
+#define CA_PCI_ARB_ERR_ENB		(1ull << 31)
+#define CA_GART_MEM_PARAM		(0x3ull << 32)
+#define CA_GART_MEM_PARAM_SHFT		32
+#define CA_GART_RD_PREFETCH_ENB		(1ull << 34)
+#define CA_GART_WR_PREFETCH_ENB		(1ull << 35)
+#define CA_GART_FLUSH_TLB		(1ull << 36)
+	/* bits 39:37 unused */
+#define CA_CRM_TNUMTO_PERIOD		(0x1fffull << 40)
+#define CA_CRM_TNUMTO_PERIOD_SHFT	40
+	/* bits 55:53 unused */
+#define CA_CRM_TNUMTO_ENB		(1ull << 56)
+#define CA_CRM_PRESCALER_BYP		(1ull << 57)
+	/* bits 59:58 unused */
+#define CA_CRM_MAX_CREDIT		(0x7ull << 60)
+#define CA_CRM_MAX_CREDIT_SHFT		60
+	/* bit 63 unused */
+
+/* ==== ca_status1 */
+#define CA_CORELET_ID			(0x3ull << 0)
+#define CA_CORELET_ID_SHFT		0
+#define CA_INTA_N			(1ull << 2)
+#define CA_INTB_N			(1ull << 3)
+#define CA_CRM_CREDIT_AVAIL		(0x7ull << 4)
+#define CA_CRM_CREDIT_AVAIL_SHFT	4
+	/* bit 7 unused */
+#define CA_CRM_SPACE_AVAIL		(0x7full << 8)
+#define CA_CRM_SPACE_AVAIL_SHFT		8
+	/* bit 15 unused */
+#define CA_GART_TLB_VAL			(0xffull << 16)
+#define CA_GART_TLB_VAL_SHFT		16
+	/* bits 63:24 unused */
+
+/* ==== ca_status2 */
+#define CA_GFX_CREDIT_AVAIL		(0xffull << 0)
+#define CA_GFX_CREDIT_AVAIL_SHFT	0
+#define CA_GFX_OPQ_AVAIL		(0xffull << 8)
+#define CA_GFX_OPQ_AVAIL_SHFT		8
+#define CA_GFX_WRBUFF_AVAIL		(0xffull << 16)
+#define CA_GFX_WRBUFF_AVAIL_SHFT	16
+#define CA_ADMA_OPQ_AVAIL		(0xffull << 24)
+#define CA_ADMA_OPQ_AVAIL_SHFT		24
+#define CA_ADMA_WRBUFF_AVAIL		(0xffull << 32)
+#define CA_ADMA_WRBUFF_AVAIL_SHFT	32
+#define CA_ADMA_RDBUFF_AVAIL		(0x7full << 40)
+#define CA_ADMA_RDBUFF_AVAIL_SHFT	40
+#define CA_PCI_PIO_OP_STAT		(1ull << 47)
+#define CA_PDMA_OPQ_AVAIL		(0xfull << 48)
+#define CA_PDMA_OPQ_AVAIL_SHFT		48
+#define CA_PDMA_WRBUFF_AVAIL		(0xfull << 52)
+#define CA_PDMA_WRBUFF_AVAIL_SHFT	52
+#define CA_PDMA_RDBUFF_AVAIL		(0x3ull << 56)
+#define CA_PDMA_RDBUFF_AVAIL_SHFT	56
+	/* bits 63:58 unused */
+
+/* ==== ca_gart_aperature */
+#define CA_GART_AP_ENB_AGP		(1ull << 0)
+#define CA_GART_PAGE_SIZE		(1ull << 1)
+#define CA_GART_AP_ENB_PCI		(1ull << 2)
+	/* bits 11:3 unused */
+#define CA_GART_AP_SIZE			(0x3ffull << 12)
+#define CA_GART_AP_SIZE_SHFT		12
+#define CA_GART_AP_BASE			(0x3ffffffffffull << 22)
+#define CA_GART_AP_BASE_SHFT		22
+
+/* ==== ca_inta_dest_addr
+   ==== ca_intb_dest_addr 
+   ==== ca_err_int_dest_addr */
+	/* bits 2:0 unused */
+#define CA_INT_DEST_ADDR		(0x7ffffffffffffull << 3)
+#define CA_INT_DEST_ADDR_SHFT		3
+	/* bits 55:54 unused */
+#define CA_INT_DEST_VECT		(0xffull << 56)
+#define CA_INT_DEST_VECT_SHFT		56
+
+/* ==== ca_int_status */
+/* ==== ca_int_status_alias */
+/* ==== ca_mult_error */
+/* ==== ca_mult_error_alias */
+/* ==== ca_first_error */
+/* ==== ca_int_mask */
+#define CA_PCI_ERR			(1ull << 0)
+	/* bits 3:1 unused */
+#define CA_GART_FETCH_ERR		(1ull << 4)
+#define CA_GFX_WR_OVFLW			(1ull << 5)
+#define CA_PIO_REQ_OVFLW		(1ull << 6)
+#define CA_CRM_PKTERR			(1ull << 7)
+#define CA_CRM_DVERR			(1ull << 8)
+#define CA_TNUMTO			(1ull << 9)
+#define CA_CXM_RSP_CRED_OVFLW		(1ull << 10)
+#define CA_CXM_REQ_CRED_OVFLW		(1ull << 11)
+#define CA_PIO_INVALID_ADDR		(1ull << 12)
+#define CA_PCI_ARB_TO			(1ull << 13)
+#define CA_AGP_REQ_OFLOW		(1ull << 14)
+#define CA_SBA_TYPE1_ERR		(1ull << 15)
+	/* bit 16 unused */
+#define CA_INTA				(1ull << 17)
+#define CA_INTB				(1ull << 18)
+#define CA_MULT_INTA			(1ull << 19)
+#define CA_MULT_INTB			(1ull << 20)
+#define CA_GFX_CREDIT_OVFLW		(1ull << 21)
+	/* bits 63:22 unused */
+
+/* ==== ca_crm_pkterr_type */
+/* ==== ca_crm_pkterr_type_alias */
+#define CA_CRM_PKTERR_SBERR_HDR		(1ull << 0)
+#define CA_CRM_PKTERR_DIDN		(1ull << 1)
+#define CA_CRM_PKTERR_PACTYPE		(1ull << 2)
+#define CA_CRM_PKTERR_INV_TNUM		(1ull << 3)
+#define CA_CRM_PKTERR_ADDR_RNG		(1ull << 4)
+#define CA_CRM_PKTERR_ADDR_ALGN		(1ull << 5)
+#define CA_CRM_PKTERR_HDR_PARAM		(1ull << 6)
+#define CA_CRM_PKTERR_CW_ERR		(1ull << 7)
+#define CA_CRM_PKTERR_SBERR_NH		(1ull << 8)
+#define CA_CRM_PKTERR_EARLY_TERM	(1ull << 9)
+#define CA_CRM_PKTERR_EARLY_TAIL	(1ull << 10)
+#define CA_CRM_PKTERR_MSSNG_TAIL	(1ull << 11)
+#define CA_CRM_PKTERR_MSSNG_HDR		(1ull << 12)
+	/* bits 15:13 unused */
+#define CA_FIRST_CRM_PKTERR_SBERR_HDR	(1ull << 16)
+#define CA_FIRST_CRM_PKTERR_DIDN	(1ull << 17)
+#define CA_FIRST_CRM_PKTERR_PACTYPE	(1ull << 18)
+#define CA_FIRST_CRM_PKTERR_INV_TNUM	(1ull << 19)
+#define CA_FIRST_CRM_PKTERR_ADDR_RNG	(1ull << 20)
+#define CA_FIRST_CRM_PKTERR_ADDR_ALGN	(1ull << 21)
+#define CA_FIRST_CRM_PKTERR_HDR_PARAM	(1ull << 22)
+#define CA_FIRST_CRM_PKTERR_CW_ERR	(1ull << 23)
+#define CA_FIRST_CRM_PKTERR_SBERR_NH	(1ull << 24)
+#define CA_FIRST_CRM_PKTERR_EARLY_TERM	(1ull << 25)
+#define CA_FIRST_CRM_PKTERR_EARLY_TAIL	(1ull << 26)
+#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL	(1ull << 27)
+#define CA_FIRST_CRM_PKTERR_MSSNG_HDR	(1ull << 28)
+	/* bits 63:29 unused */
+
+/* ==== ca_crm_ct_error_detail_1 */
+#define CA_PKT_TYPE			(0xfull << 0)
+#define CA_PKT_TYPE_SHFT		0
+#define CA_SRC_ID			(0x3ull << 4)
+#define CA_SRC_ID_SHFT			4
+#define CA_DATA_SZ			(0x3ull << 6)
+#define CA_DATA_SZ_SHFT			6
+#define CA_TNUM				(0xffull << 8)
+#define CA_TNUM_SHFT			8
+#define CA_DW_DATA_EN			(0xffull << 16)
+#define CA_DW_DATA_EN_SHFT		16
+#define CA_GFX_CRED			(0xffull << 24)
+#define CA_GFX_CRED_SHFT		24
+#define CA_MEM_RD_PARAM			(0x3ull << 32)
+#define CA_MEM_RD_PARAM_SHFT		32
+#define CA_PIO_OP			(1ull << 34)
+#define CA_CW_ERR			(1ull << 35)
+	/* bits 62:36 unused */
+#define CA_VALID			(1ull << 63)
+
+/* ==== ca_crm_ct_error_detail_2 */
+	/* bits 2:0 unused */
+#define CA_PKT_ADDR			(0x1fffffffffffffull << 3)
+#define CA_PKT_ADDR_SHFT		3
+	/* bits 63:56 unused */
+
+/* ==== ca_crm_tnumto */
+#define CA_CRM_TNUMTO_VAL		(0xffull << 0)
+#define CA_CRM_TNUMTO_VAL_SHFT		0
+#define CA_CRM_TNUMTO_WR		(1ull << 8)
+	/* bits 63:9 unused */
+
+/* ==== ca_gart_err */
+#define CA_GART_ERR_SOURCE		(0x3ull << 0)
+#define CA_GART_ERR_SOURCE_SHFT		0
+	/* bits 3:2 unused */
+#define CA_GART_ERR_ADDR		(0xfffffffffull << 4)
+#define CA_GART_ERR_ADDR_SHFT		4
+	/* bits 63:40 unused */
+
+/* ==== ca_pcierr_type */
+#define CA_PCIERR_DATA			(0xffffffffull << 0)
+#define CA_PCIERR_DATA_SHFT		0
+#define CA_PCIERR_ENB			(0xfull << 32)
+#define CA_PCIERR_ENB_SHFT		32
+#define CA_PCIERR_CMD			(0xfull << 36)
+#define CA_PCIERR_CMD_SHFT		36
+#define CA_PCIERR_A64			(1ull << 40)
+#define CA_PCIERR_SLV_SERR		(1ull << 41)
+#define CA_PCIERR_SLV_WR_PERR		(1ull << 42)
+#define CA_PCIERR_SLV_RD_PERR		(1ull << 43)
+#define CA_PCIERR_MST_SERR		(1ull << 44)
+#define CA_PCIERR_MST_WR_PERR		(1ull << 45)
+#define CA_PCIERR_MST_RD_PERR		(1ull << 46)
+#define CA_PCIERR_MST_MABT		(1ull << 47)
+#define CA_PCIERR_MST_TABT		(1ull << 48)
+#define CA_PCIERR_MST_RETRY_TOUT	(1ull << 49)
+
+#define CA_PCIERR_TYPES \
+	(CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \
+	 CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \
+	 CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \
+	 CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT)
+
+	/* bits 63:50 unused */
+
+/* ==== ca_pci_dma_addr_extn */
+#define CA_UPPER_NODE_OFFSET		(0x3full << 0)
+#define CA_UPPER_NODE_OFFSET_SHFT	0
+	/* bits 7:6 unused */
+#define CA_CHIPLET_ID			(0x3ull << 8)
+#define CA_CHIPLET_ID_SHFT		8
+	/* bits 11:10 unused */
+#define CA_PCI_DMA_NODE_ID		(0xffffull << 12)
+#define CA_PCI_DMA_NODE_ID_SHFT		12
+	/* bits 27:26 unused */
+#define CA_PCI_DMA_PIO_MEM_TYPE		(1ull << 28)
+	/* bits 63:29 unused */
+
+
+/* ==== ca_agp_dma_addr_extn */
+	/* bits 19:0 unused */
+#define CA_AGP_DMA_NODE_ID		(0xffffull << 20)
+#define CA_AGP_DMA_NODE_ID_SHFT		20
+	/* bits 27:26 unused */
+#define CA_AGP_DMA_PIO_MEM_TYPE		(1ull << 28)
+	/* bits 63:29 unused */
+
+/* ==== ca_debug_vector_sel */
+#define CA_DEBUG_MN_VSEL		(0xfull << 0)
+#define CA_DEBUG_MN_VSEL_SHFT		0
+#define CA_DEBUG_PP_VSEL		(0xfull << 4)
+#define CA_DEBUG_PP_VSEL_SHFT		4
+#define CA_DEBUG_GW_VSEL		(0xfull << 8)
+#define CA_DEBUG_GW_VSEL_SHFT		8
+#define CA_DEBUG_GT_VSEL		(0xfull << 12)
+#define CA_DEBUG_GT_VSEL_SHFT		12
+#define CA_DEBUG_PD_VSEL		(0xfull << 16)
+#define CA_DEBUG_PD_VSEL_SHFT		16
+#define CA_DEBUG_AD_VSEL		(0xfull << 20)
+#define CA_DEBUG_AD_VSEL_SHFT		20
+#define CA_DEBUG_CX_VSEL		(0xfull << 24)
+#define CA_DEBUG_CX_VSEL_SHFT		24
+#define CA_DEBUG_CR_VSEL		(0xfull << 28)
+#define CA_DEBUG_CR_VSEL_SHFT		28
+#define CA_DEBUG_BA_VSEL		(0xfull << 32)
+#define CA_DEBUG_BA_VSEL_SHFT		32
+#define CA_DEBUG_PE_VSEL		(0xfull << 36)
+#define CA_DEBUG_PE_VSEL_SHFT		36
+#define CA_DEBUG_BO_VSEL		(0xfull << 40)
+#define CA_DEBUG_BO_VSEL_SHFT		40
+#define CA_DEBUG_BI_VSEL		(0xfull << 44)
+#define CA_DEBUG_BI_VSEL_SHFT		44
+#define CA_DEBUG_AS_VSEL		(0xfull << 48)
+#define CA_DEBUG_AS_VSEL_SHFT		48
+#define CA_DEBUG_PS_VSEL		(0xfull << 52)
+#define CA_DEBUG_PS_VSEL_SHFT		52
+#define CA_DEBUG_PM_VSEL		(0xfull << 56)
+#define CA_DEBUG_PM_VSEL_SHFT		56
+	/* bits 63:60 unused */
+
+/* ==== ca_debug_mux_core_sel */
+/* ==== ca_debug_mux_pci_sel */
+#define CA_DEBUG_MSEL0			(0x7ull << 0)
+#define CA_DEBUG_MSEL0_SHFT		0
+	/* bit 3 unused */
+#define CA_DEBUG_NSEL0			(0x7ull << 4)
+#define CA_DEBUG_NSEL0_SHFT		4
+	/* bit 7 unused */
+#define CA_DEBUG_MSEL1			(0x7ull << 8)
+#define CA_DEBUG_MSEL1_SHFT		8
+	/* bit 11 unused */
+#define CA_DEBUG_NSEL1			(0x7ull << 12)
+#define CA_DEBUG_NSEL1_SHFT		12
+	/* bit 15 unused */
+#define CA_DEBUG_MSEL2			(0x7ull << 16)
+#define CA_DEBUG_MSEL2_SHFT		16
+	/* bit 19 unused */
+#define CA_DEBUG_NSEL2			(0x7ull << 20)
+#define CA_DEBUG_NSEL2_SHFT		20
+	/* bit 23 unused */
+#define CA_DEBUG_MSEL3			(0x7ull << 24)
+#define CA_DEBUG_MSEL3_SHFT		24
+	/* bit 27 unused */
+#define CA_DEBUG_NSEL3			(0x7ull << 28)
+#define CA_DEBUG_NSEL3_SHFT		28
+	/* bit 31 unused */
+#define CA_DEBUG_MSEL4			(0x7ull << 32)
+#define CA_DEBUG_MSEL4_SHFT		32
+	/* bit 35 unused */
+#define CA_DEBUG_NSEL4			(0x7ull << 36)
+#define CA_DEBUG_NSEL4_SHFT		36
+	/* bit 39 unused */
+#define CA_DEBUG_MSEL5			(0x7ull << 40)
+#define CA_DEBUG_MSEL5_SHFT		40
+	/* bit 43 unused */
+#define CA_DEBUG_NSEL5			(0x7ull << 44)
+#define CA_DEBUG_NSEL5_SHFT		44
+	/* bit 47 unused */
+#define CA_DEBUG_MSEL6			(0x7ull << 48)
+#define CA_DEBUG_MSEL6_SHFT		48
+	/* bit 51 unused */
+#define CA_DEBUG_NSEL6			(0x7ull << 52)
+#define CA_DEBUG_NSEL6_SHFT		52
+	/* bit 55 unused */
+#define CA_DEBUG_MSEL7			(0x7ull << 56)
+#define CA_DEBUG_MSEL7_SHFT		56
+	/* bit 59 unused */
+#define CA_DEBUG_NSEL7			(0x7ull << 60)
+#define CA_DEBUG_NSEL7_SHFT		60
+	/* bit 63 unused */
+
+
+/* ==== ca_debug_domain_sel */
+#define CA_DEBUG_DOMAIN_L		(1ull << 0)
+#define CA_DEBUG_DOMAIN_H		(1ull << 1)
+	/* bits 63:2 unused */
+
+/* ==== ca_gart_ptr_table */
+#define CA_GART_PTR_VAL			(1ull << 0)
+	/* bits 11:1 unused */
+#define CA_GART_PTR_ADDR		(0xfffffffffffull << 12)
+#define CA_GART_PTR_ADDR_SHFT		12
+	/* bits 63:56 unused */
+
+/* ==== ca_gart_tlb_addr[0-7] */
+#define CA_GART_TLB_ADDR		(0xffffffffffffffull << 0)
+#define CA_GART_TLB_ADDR_SHFT		0
+	/* bits 62:56 unused */
+#define CA_GART_TLB_ENTRY_VAL		(1ull << 63)
+
+/*
+ * PIO address space ranges for TIO:CA
+ */
+
+/* CA internal registers */
+#define CA_PIO_ADMIN			0x00000000
+#define CA_PIO_ADMIN_LEN		0x00010000
+
+/* GFX Write Buffer - Diagnostics */
+#define CA_PIO_GFX			0x00010000
+#define CA_PIO_GFX_LEN			0x00010000
+
+/* AGP DMA Write Buffer - Diagnostics */
+#define CA_PIO_AGP_DMAWRITE		0x00020000
+#define CA_PIO_AGP_DMAWRITE_LEN		0x00010000
+
+/* AGP DMA READ Buffer - Diagnostics */
+#define CA_PIO_AGP_DMAREAD		0x00030000
+#define CA_PIO_AGP_DMAREAD_LEN		0x00010000
+
+/* PCI Config Type 0 */
+#define CA_PIO_PCI_TYPE0_CONFIG		0x01000000
+#define CA_PIO_PCI_TYPE0_CONFIG_LEN	0x01000000
+
+/* PCI Config Type 1 */
+#define CA_PIO_PCI_TYPE1_CONFIG		0x02000000
+#define CA_PIO_PCI_TYPE1_CONFIG_LEN	0x01000000
+
+/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */
+#define CA_PIO_PCI_IO			0x03000000
+#define CA_PIO_PCI_IO_LEN		0x05000000
+
+/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */
+/*	use Fast Write if enabled and coretalk packet type is a GFX request */
+#define CA_PIO_PCI_MEM_OFFSET		0x08000000
+#define CA_PIO_PCI_MEM_OFFSET_LEN	0x08000000
+
+/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */
+/*	use Fast Write if enabled and coretalk packet type is a GFX request */
+#define CA_PIO_PCI_MEM			0x40000000
+#define CA_PIO_PCI_MEM_LEN		0xc0000000
+
+/*
+ * DMA space
+ *
+ * The CA aperature (ie. bus address range) mapped by the GART is segmented into
+ * two parts.  The lower portion of the aperature is used for mapping 32 bit
+ * PCI addresses which are managed by the dma interfaces in this file.  The
+ * upper poprtion of the aperature is used for mapping 48 bit AGP addresses.
+ * The AGP portion of the aperature is managed by the agpgart_be.c driver
+ * in drivers/linux/agp.  There are ca-specific hooks in that driver to
+ * manipulate the gart, but management of the AGP portion of the aperature
+ * is the responsibility of that driver.
+ *
+ * CA allows three main types of DMA mapping:
+ *
+ * PCI 64-bit	Managed by this driver
+ * PCI 32-bit 	Managed by this driver
+ * AGP 48-bit	Managed by hooks in the /dev/agpgart driver
+ *
+ * All of the above can optionally be remapped through the GART.  The following
+ * table lists the combinations of addressing types and GART remapping that
+ * is currently supported by the driver (h/w supports all, s/w limits this):
+ *
+ *		PCI64		PCI32		AGP48
+ * GART		no		yes		yes
+ * Direct	yes		yes		no
+ *
+ * GART remapping of PCI64 is not done because there is no need to.  The
+ * 64 bit PCI address holds all of the information necessary to target any
+ * memory in the system.
+ *
+ * AGP48 is always mapped through the GART.  Management of the AGP48 portion
+ * of the aperature is the responsibility of code in the agpgart_be driver.
+ *
+ * The non-64 bit bus address space will currently be partitioned like this:
+ *
+ *	0xffff_ffff_ffff	+--------
+ *				| AGP48 direct
+ *				| Space managed by this driver
+ *	CA_AGP_DIRECT_BASE	+--------
+ *				| AGP GART mapped (gfx aperature)
+ *				| Space managed by /dev/agpgart driver
+ *				| This range is exposed to the agpgart
+ * 				| driver as the "graphics aperature"
+ *	CA_AGP_MAPPED_BASE	+-----
+ *				| PCI GART mapped
+ *				| Space managed by this driver		
+ *	CA_PCI32_MAPPED_BASE	+----
+ *				| PCI32 direct
+ *				| Space managed by this driver
+ *	0xC000_0000		+--------
+ *	(CA_PCI32_DIRECT_BASE)
+ *
+ * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE
+ * is what we call the CA aperature.  Addresses falling in this range will
+ * be remapped using the GART.
+ *
+ * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE
+ * is what we call the graphics aperature.  This is a subset of the CA
+ * aperature and is under the control of the agpgart_be driver.
+ *
+ * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are
+ * somewhat arbitrary values.  The known constraints on choosing these is:
+ *
+ * 1)  CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size)
+ *     must be one of the values supported by the ca_gart_aperature register.
+ *     Currently valid values are: 4MB through 4096MB in powers of 2 increments
+ *
+ * 2)  CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size)
+ *     must be in MB units since that's what the agpgart driver assumes.
+ */
+
+/*
+ * Define Bus DMA ranges.  These are configurable (see constraints above)
+ * and will probably need tuning based on experience.
+ */
+
+
+/*
+ * 11/24/03
+ * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it
+ * generally unusable.  The problem is that for PCI direct 32 
+ * DMA's, all 32 bits of the bus address are used to form the lower 32 bits
+ * of the coretalk address, and coretalk bits 38:32 come from a register.
+ * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available
+ * for DMA (the rest is allocated to PIO), host node addresses need to be
+ * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range
+ * as well.  So there can be no PCI32 direct DMA below 3GB!!  For this
+ * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes
+ * tioca_dma_direct32() a noop but preserves the code flow should this issue
+ * be fixed in a respin.
+ *
+ * For now, all PCI32 DMA's must be mapped through the GART.
+ */
+
+#define CA_PCI32_DIRECT_BASE	0xC0000000UL	/* BASE not configurable */
+#define CA_PCI32_DIRECT_SIZE	0x00000000UL	/* 0 MB */
+
+#define CA_PCI32_MAPPED_BASE	0xC0000000UL
+#define CA_PCI32_MAPPED_SIZE	0x40000000UL	/* 2GB */
+
+#define CA_AGP_MAPPED_BASE	0x80000000UL
+#define CA_AGP_MAPPED_SIZE	0x40000000UL	/* 2GB */
+
+#define CA_AGP_DIRECT_BASE	0x40000000UL	/* 2GB */
+#define CA_AGP_DIRECT_SIZE	0x40000000UL
+
+#define CA_APERATURE_BASE	(CA_AGP_MAPPED_BASE)
+#define CA_APERATURE_SIZE	(CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE)
+
+#endif  /* _ASM_IA64_SN_TIO_TIOCA_H */
diff --git a/arch/ia64/include/asm/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h
new file mode 100644
index 00000000000..9a820ac61be
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tioca_provider.h
@@ -0,0 +1,207 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
+#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
+
+#include <asm/sn/tioca.h>
+
+/*
+ * WAR enables
+ * Defines for individual WARs. Each is a bitmask of applicable
+ * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B,
+ * (3 << 1) == (rev A or rev B), etc
+ */
+
+#define TIOCA_WAR_ENABLED(pv, tioca_common) \
+	((1 << tioca_common->ca_rev) & pv)
+
+  /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */
+#define PV907908 (1 << 1)
+  /* ATI config space problems after BIOS execution starts */
+#define PV908234 (1 << 1)
+  /* CA:AGPDMA write request data mismatch with ABC1CL merge */
+#define PV895469 (1 << 1)
+  /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/
+#define PV910244 (1 << 1)
+
+struct tioca_dmamap{
+	struct list_head	cad_list;	/* headed by ca_list */
+
+	dma_addr_t		cad_dma_addr;	/* Linux dma handle */
+	uint			cad_gart_entry; /* start entry in ca_gart_pagemap */
+	uint			cad_gart_size;	/* #entries for this map */
+};
+
+/*
+ * Kernel only fields.  Prom may look at this stuff for debugging only.
+ * Access this structure through the ca_kernel_private ptr.
+ */
+
+struct tioca_common ;
+
+struct tioca_kernel {
+	struct tioca_common	*ca_common;	/* tioca this belongs to */
+	struct list_head	ca_list;	/* list of all ca's */
+	struct list_head	ca_dmamaps;
+	spinlock_t		ca_lock;	/* Kernel lock */
+	cnodeid_t		ca_closest_node;
+	struct list_head	*ca_devices;	/* bus->devices */
+
+	/*
+	 * General GART stuff
+	 */
+	u64	ca_ap_size;		/* size of aperature in bytes */
+	u32	ca_gart_entries;	/* # u64 entries in gart */
+	u32	ca_ap_pagesize; 	/* aperature page size in bytes */
+	u64	ca_ap_bus_base; 	/* bus address of CA aperature */
+	u64	ca_gart_size;		/* gart size in bytes */
+	u64	*ca_gart;		/* gart table vaddr */
+	u64	ca_gart_coretalk_addr;	/* gart coretalk addr */
+	u8		ca_gart_iscoherent;	/* used in tioca_tlbflush */
+
+	/* PCI GART convenience values */
+	u64	ca_pciap_base;		/* pci aperature bus base address */
+	u64	ca_pciap_size;		/* pci aperature size (bytes) */
+	u64	ca_pcigart_base;	/* gfx GART bus base address */
+	u64	*ca_pcigart;		/* gfx GART vm address */
+	u32	ca_pcigart_entries;
+	u32	ca_pcigart_start;	/* PCI start index in ca_gart */
+	void		*ca_pcigart_pagemap;
+
+	/* AGP GART convenience values */
+	u64	ca_gfxap_base;		/* gfx aperature bus base address */
+	u64	ca_gfxap_size;		/* gfx aperature size (bytes) */
+	u64	ca_gfxgart_base;	/* gfx GART bus base address */
+	u64	*ca_gfxgart;		/* gfx GART vm address */
+	u32	ca_gfxgart_entries;
+	u32	ca_gfxgart_start;	/* agpgart start index in ca_gart */
+};
+
+/*
+ * Common tioca info shared between kernel and prom
+ *
+ * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES
+ * TO THE PROM VERSION.
+ */
+
+struct tioca_common {
+	struct pcibus_bussoft	ca_common;	/* common pciio header */
+
+	u32		ca_rev;
+	u32		ca_closest_nasid;
+
+	u64		ca_prom_private;
+	u64		ca_kernel_private;
+};
+
+/**
+ * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry
+ * @paddr: page address to convert
+ *
+ * Convert a system [coretalk] address to a GART entry.  GART entries are
+ * formed using the following:
+ *
+ *     data = ( (1<<63) |  ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) | 
+ * (REMAP_SYS_ADDR) ) >> 12 )
+ *
+ * DATA written to 1 GART TABLE Entry in system memory is remapped system
+ * addr for 1 page 
+ *
+ * The data is for coretalk address format right shifted 12 bits with a
+ * valid bit.
+ *
+ *	GART_TABLE_ENTRY [ 25:0 ]  -- REMAP_SYS_ADDRESS[37:12].
+ *	GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id.
+ *	GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID.
+ *	GART_TABLE_ENTRY [ 63 ]    -- Valid Bit 
+ */
+static inline u64
+tioca_paddr_to_gart(unsigned long paddr)
+{
+	/*
+	 * We are assuming right now that paddr already has the correct
+	 * format since the address from xtalk_dmaXXX should already have
+	 * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations.
+	 */
+
+	return ((paddr) >> 12) | (1UL << 63);
+}
+
+/**
+ * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA
+ * @page_addr: system page address to map
+ */
+
+static inline unsigned long
+tioca_physpage_to_gart(u64 page_addr)
+{
+	u64 coretalk_addr;
+
+	coretalk_addr = PHYS_TO_TIODMA(page_addr);
+	if (!coretalk_addr) {
+		return 0;
+	}
+
+	return tioca_paddr_to_gart(coretalk_addr);
+}
+
+/**
+ * tioca_tlbflush - invalidate cached SGI CA GART TLB entries
+ * @tioca_kernel: CA context 
+ *
+ * Invalidate tlb entries for a given CA GART.  Main complexity is to account
+ * for revA bug.
+ */
+static inline void
+tioca_tlbflush(struct tioca_kernel *tioca_kernel)
+{
+	volatile u64 tmp;
+	volatile struct tioca __iomem *ca_base;
+	struct tioca_common *tioca_common;
+
+	tioca_common = tioca_kernel->ca_common;
+	ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base;
+
+	/*
+	 * Explicit flushes not needed if GART is in cached mode
+	 */
+	if (tioca_kernel->ca_gart_iscoherent) {
+		if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) {
+			/*
+			 * PV910244:  RevA CA needs explicit flushes.
+			 * Need to put GART into uncached mode before
+			 * flushing otherwise the explicit flush is ignored.
+			 *
+			 * Alternate WAR would be to leave GART cached and
+			 * touch every CL aligned GART entry.
+			 */
+
+			__sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+			__sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
+			__sn_setq_relaxed(&ca_base->ca_control2,
+			    (0x2ull << CA_GART_MEM_PARAM_SHFT));
+			tmp = __sn_readq_relaxed(&ca_base->ca_control2);
+		}
+
+		return;
+	}
+
+	/*
+	 * Gart in uncached mode ... need an explicit flush.
+	 */
+
+	__sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
+	tmp = __sn_readq_relaxed(&ca_base->ca_control2);
+}
+
+extern u32	tioca_gart_found;
+extern struct list_head tioca_list;
+extern int tioca_init_provider(void);
+extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern);
+#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h
new file mode 100644
index 00000000000..893468e1b41
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tioce.h
@@ -0,0 +1,760 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_IA64_SN_TIOCE_H__
+#define __ASM_IA64_SN_TIOCE_H__
+
+/* CE ASIC part & mfgr information  */
+#define TIOCE_PART_NUM			0xCE00
+#define TIOCE_SRC_ID			0x01
+#define TIOCE_REV_A			0x1
+
+/* CE Virtual PPB Vendor/Device IDs */
+#define CE_VIRT_PPB_VENDOR_ID		0x10a9
+#define CE_VIRT_PPB_DEVICE_ID		0x4002
+
+/* CE Host Bridge Vendor/Device IDs */
+#define CE_HOST_BRIDGE_VENDOR_ID	0x10a9
+#define CE_HOST_BRIDGE_DEVICE_ID	0x4001
+
+
+#define TIOCE_NUM_M40_ATES		4096
+#define TIOCE_NUM_M3240_ATES		2048
+#define TIOCE_NUM_PORTS			2
+
+/*
+ * Register layout for TIOCE.  MMR offsets are shown at the far right of the
+ * structure definition.
+ */
+typedef volatile struct tioce {
+	/*
+	 * ADMIN : Administration Registers
+	 */
+	u64	ce_adm_id;				/* 0x000000 */
+	u64	ce_pad_000008;				/* 0x000008 */
+	u64	ce_adm_dyn_credit_status;		/* 0x000010 */
+	u64	ce_adm_last_credit_status;		/* 0x000018 */
+	u64	ce_adm_credit_limit;			/* 0x000020 */
+	u64	ce_adm_force_credit;			/* 0x000028 */
+	u64	ce_adm_control;				/* 0x000030 */
+	u64	ce_adm_mmr_chn_timeout;			/* 0x000038 */
+	u64	ce_adm_ssp_ure_timeout;			/* 0x000040 */
+	u64	ce_adm_ssp_dre_timeout;			/* 0x000048 */
+	u64	ce_adm_ssp_debug_sel;			/* 0x000050 */
+	u64	ce_adm_int_status;			/* 0x000058 */
+	u64	ce_adm_int_status_alias;		/* 0x000060 */
+	u64	ce_adm_int_mask;			/* 0x000068 */
+	u64	ce_adm_int_pending;			/* 0x000070 */
+	u64	ce_adm_force_int;			/* 0x000078 */
+	u64	ce_adm_ure_ups_buf_barrier_flush;	/* 0x000080 */
+	u64	ce_adm_int_dest[15];	    /* 0x000088 -- 0x0000F8 */
+	u64	ce_adm_error_summary;			/* 0x000100 */
+	u64	ce_adm_error_summary_alias;		/* 0x000108 */
+	u64	ce_adm_error_mask;			/* 0x000110 */
+	u64	ce_adm_first_error;			/* 0x000118 */
+	u64	ce_adm_error_overflow;			/* 0x000120 */
+	u64	ce_adm_error_overflow_alias;		/* 0x000128 */
+	u64	ce_pad_000130[2];	    /* 0x000130 -- 0x000138 */
+	u64	ce_adm_tnum_error;			/* 0x000140 */
+	u64	ce_adm_mmr_err_detail;			/* 0x000148 */
+	u64	ce_adm_msg_sram_perr_detail;		/* 0x000150 */
+	u64	ce_adm_bap_sram_perr_detail;		/* 0x000158 */
+	u64	ce_adm_ce_sram_perr_detail;		/* 0x000160 */
+	u64	ce_adm_ce_credit_oflow_detail;		/* 0x000168 */
+	u64	ce_adm_tx_link_idle_max_timer;		/* 0x000170 */
+	u64	ce_adm_pcie_debug_sel;			/* 0x000178 */
+	u64	ce_pad_000180[16];	    /* 0x000180 -- 0x0001F8 */
+
+	u64	ce_adm_pcie_debug_sel_top;		/* 0x000200 */
+	u64	ce_adm_pcie_debug_lat_sel_lo_top;	/* 0x000208 */
+	u64	ce_adm_pcie_debug_lat_sel_hi_top;	/* 0x000210 */
+	u64	ce_adm_pcie_debug_trig_sel_top;		/* 0x000218 */
+	u64	ce_adm_pcie_debug_trig_lat_sel_lo_top;	/* 0x000220 */
+	u64	ce_adm_pcie_debug_trig_lat_sel_hi_top;	/* 0x000228 */
+	u64	ce_adm_pcie_trig_compare_top;		/* 0x000230 */
+	u64	ce_adm_pcie_trig_compare_en_top;	/* 0x000238 */
+	u64	ce_adm_ssp_debug_sel_top;		/* 0x000240 */
+	u64	ce_adm_ssp_debug_lat_sel_lo_top;	/* 0x000248 */
+	u64	ce_adm_ssp_debug_lat_sel_hi_top;	/* 0x000250 */
+	u64	ce_adm_ssp_debug_trig_sel_top;		/* 0x000258 */
+	u64	ce_adm_ssp_debug_trig_lat_sel_lo_top;	/* 0x000260 */
+	u64	ce_adm_ssp_debug_trig_lat_sel_hi_top;	/* 0x000268 */
+	u64	ce_adm_ssp_trig_compare_top;		/* 0x000270 */
+	u64	ce_adm_ssp_trig_compare_en_top;		/* 0x000278 */
+	u64	ce_pad_000280[48];	    /* 0x000280 -- 0x0003F8 */
+
+	u64	ce_adm_bap_ctrl;			/* 0x000400 */
+	u64	ce_pad_000408[127];	    /* 0x000408 -- 0x0007F8 */
+
+	u64	ce_msg_buf_data63_0[35];    /* 0x000800 -- 0x000918 */
+	u64	ce_pad_000920[29];	    /* 0x000920 -- 0x0009F8 */
+
+	u64	ce_msg_buf_data127_64[35];  /* 0x000A00 -- 0x000B18 */
+	u64	ce_pad_000B20[29];	    /* 0x000B20 -- 0x000BF8 */
+
+	u64	ce_msg_buf_parity[35];	    /* 0x000C00 -- 0x000D18 */
+	u64	ce_pad_000D20[29];	    /* 0x000D20 -- 0x000DF8 */
+
+	u64	ce_pad_000E00[576];	    /* 0x000E00 -- 0x001FF8 */
+
+	/*
+	 * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2)
+	 * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000
+	 * NOTE: the comment offsets at far right: let 'z' = {2 or 3}
+	 */
+	#define ce_lsi(link_num)	ce_lsi[link_num-1]
+	struct ce_lsi_reg {
+		u64	ce_lsi_lpu_id;			/* 0x00z000 */
+		u64	ce_lsi_rst;			/* 0x00z008 */
+		u64	ce_lsi_dbg_stat;		/* 0x00z010 */
+		u64	ce_lsi_dbg_cfg;			/* 0x00z018 */
+		u64	ce_lsi_ltssm_ctrl;		/* 0x00z020 */
+		u64	ce_lsi_lk_stat;			/* 0x00z028 */
+		u64	ce_pad_00z030[2];   /* 0x00z030 -- 0x00z038 */
+		u64	ce_lsi_int_and_stat;		/* 0x00z040 */
+		u64	ce_lsi_int_mask;		/* 0x00z048 */
+		u64	ce_pad_00z050[22];  /* 0x00z050 -- 0x00z0F8 */
+		u64	ce_lsi_lk_perf_cnt_sel;		/* 0x00z100 */
+		u64	ce_pad_00z108;			/* 0x00z108 */
+		u64	ce_lsi_lk_perf_cnt_ctrl;	/* 0x00z110 */
+		u64	ce_pad_00z118;			/* 0x00z118 */
+		u64	ce_lsi_lk_perf_cnt1;		/* 0x00z120 */
+		u64	ce_lsi_lk_perf_cnt1_test;	/* 0x00z128 */
+		u64	ce_lsi_lk_perf_cnt2;		/* 0x00z130 */
+		u64	ce_lsi_lk_perf_cnt2_test;	/* 0x00z138 */
+		u64	ce_pad_00z140[24];  /* 0x00z140 -- 0x00z1F8 */
+		u64	ce_lsi_lk_lyr_cfg;		/* 0x00z200 */
+		u64	ce_lsi_lk_lyr_status;		/* 0x00z208 */
+		u64	ce_lsi_lk_lyr_int_stat;		/* 0x00z210 */
+		u64	ce_lsi_lk_ly_int_stat_test;	/* 0x00z218 */
+		u64	ce_lsi_lk_ly_int_stat_mask;	/* 0x00z220 */
+		u64	ce_pad_00z228[3];   /* 0x00z228 -- 0x00z238 */
+		u64	ce_lsi_fc_upd_ctl;		/* 0x00z240 */
+		u64	ce_pad_00z248[3];   /* 0x00z248 -- 0x00z258 */
+		u64	ce_lsi_flw_ctl_upd_to_timer;	/* 0x00z260 */
+		u64	ce_lsi_flw_ctl_upd_timer0;	/* 0x00z268 */
+		u64	ce_lsi_flw_ctl_upd_timer1;	/* 0x00z270 */
+		u64	ce_pad_00z278[49];  /* 0x00z278 -- 0x00z3F8 */
+		u64	ce_lsi_freq_nak_lat_thrsh;	/* 0x00z400 */
+		u64	ce_lsi_ack_nak_lat_tmr;		/* 0x00z408 */
+		u64	ce_lsi_rply_tmr_thr;		/* 0x00z410 */
+		u64	ce_lsi_rply_tmr;		/* 0x00z418 */
+		u64	ce_lsi_rply_num_stat;		/* 0x00z420 */
+		u64	ce_lsi_rty_buf_max_addr;	/* 0x00z428 */
+		u64	ce_lsi_rty_fifo_ptr;		/* 0x00z430 */
+		u64	ce_lsi_rty_fifo_rd_wr_ptr;	/* 0x00z438 */
+		u64	ce_lsi_rty_fifo_cred;		/* 0x00z440 */
+		u64	ce_lsi_seq_cnt;			/* 0x00z448 */
+		u64	ce_lsi_ack_sent_seq_num;	/* 0x00z450 */
+		u64	ce_lsi_seq_cnt_fifo_max_addr;	/* 0x00z458 */
+		u64	ce_lsi_seq_cnt_fifo_ptr;	/* 0x00z460 */
+		u64	ce_lsi_seq_cnt_rd_wr_ptr;	/* 0x00z468 */
+		u64	ce_lsi_tx_lk_ts_ctl;		/* 0x00z470 */
+		u64	ce_pad_00z478;			/* 0x00z478 */
+		u64	ce_lsi_mem_addr_ctl;		/* 0x00z480 */
+		u64	ce_lsi_mem_d_ld0;		/* 0x00z488 */
+		u64	ce_lsi_mem_d_ld1;		/* 0x00z490 */
+		u64	ce_lsi_mem_d_ld2;		/* 0x00z498 */
+		u64	ce_lsi_mem_d_ld3;		/* 0x00z4A0 */
+		u64	ce_lsi_mem_d_ld4;		/* 0x00z4A8 */
+		u64	ce_pad_00z4B0[2];   /* 0x00z4B0 -- 0x00z4B8 */
+		u64	ce_lsi_rty_d_cnt;		/* 0x00z4C0 */
+		u64	ce_lsi_seq_buf_cnt;		/* 0x00z4C8 */
+		u64	ce_lsi_seq_buf_bt_d;		/* 0x00z4D0 */
+		u64	ce_pad_00z4D8;			/* 0x00z4D8 */
+		u64	ce_lsi_ack_lat_thr;		/* 0x00z4E0 */
+		u64	ce_pad_00z4E8[3];   /* 0x00z4E8 -- 0x00z4F8 */
+		u64	ce_lsi_nxt_rcv_seq_1_cntr;	/* 0x00z500 */
+		u64	ce_lsi_unsp_dllp_rcvd;		/* 0x00z508 */
+		u64	ce_lsi_rcv_lk_ts_ctl;		/* 0x00z510 */
+		u64	ce_pad_00z518[29];  /* 0x00z518 -- 0x00z5F8 */
+		u64	ce_lsi_phy_lyr_cfg;		/* 0x00z600 */
+		u64	ce_pad_00z608;			/* 0x00z608 */
+		u64	ce_lsi_phy_lyr_int_stat;	/* 0x00z610 */
+		u64	ce_lsi_phy_lyr_int_stat_test;	/* 0x00z618 */
+		u64	ce_lsi_phy_lyr_int_mask;	/* 0x00z620 */
+		u64	ce_pad_00z628[11];  /* 0x00z628 -- 0x00z678 */
+		u64	ce_lsi_rcv_phy_cfg;		/* 0x00z680 */
+		u64	ce_lsi_rcv_phy_stat1;		/* 0x00z688 */
+		u64	ce_lsi_rcv_phy_stat2;		/* 0x00z690 */
+		u64	ce_lsi_rcv_phy_stat3;		/* 0x00z698 */
+		u64	ce_lsi_rcv_phy_int_stat;	/* 0x00z6A0 */
+		u64	ce_lsi_rcv_phy_int_stat_test;	/* 0x00z6A8 */
+		u64	ce_lsi_rcv_phy_int_mask;	/* 0x00z6B0 */
+		u64	ce_pad_00z6B8[9];   /* 0x00z6B8 -- 0x00z6F8 */
+		u64	ce_lsi_tx_phy_cfg;		/* 0x00z700 */
+		u64	ce_lsi_tx_phy_stat;		/* 0x00z708 */
+		u64	ce_lsi_tx_phy_int_stat;		/* 0x00z710 */
+		u64	ce_lsi_tx_phy_int_stat_test;	/* 0x00z718 */
+		u64	ce_lsi_tx_phy_int_mask;		/* 0x00z720 */
+		u64	ce_lsi_tx_phy_stat2;		/* 0x00z728 */
+		u64	ce_pad_00z730[10];  /* 0x00z730 -- 0x00z77F */
+		u64	ce_lsi_ltssm_cfg1;		/* 0x00z780 */
+		u64	ce_lsi_ltssm_cfg2;		/* 0x00z788 */
+		u64	ce_lsi_ltssm_cfg3;		/* 0x00z790 */
+		u64	ce_lsi_ltssm_cfg4;		/* 0x00z798 */
+		u64	ce_lsi_ltssm_cfg5;		/* 0x00z7A0 */
+		u64	ce_lsi_ltssm_stat1;		/* 0x00z7A8 */
+		u64	ce_lsi_ltssm_stat2;		/* 0x00z7B0 */
+		u64	ce_lsi_ltssm_int_stat;		/* 0x00z7B8 */
+		u64	ce_lsi_ltssm_int_stat_test;	/* 0x00z7C0 */
+		u64	ce_lsi_ltssm_int_mask;		/* 0x00z7C8 */
+		u64	ce_lsi_ltssm_stat_wr_en;	/* 0x00z7D0 */
+		u64	ce_pad_00z7D8[5];   /* 0x00z7D8 -- 0x00z7F8 */
+		u64	ce_lsi_gb_cfg1;			/* 0x00z800 */
+		u64	ce_lsi_gb_cfg2;			/* 0x00z808 */
+		u64	ce_lsi_gb_cfg3;			/* 0x00z810 */
+		u64	ce_lsi_gb_cfg4;			/* 0x00z818 */
+		u64	ce_lsi_gb_stat;			/* 0x00z820 */
+		u64	ce_lsi_gb_int_stat;		/* 0x00z828 */
+		u64	ce_lsi_gb_int_stat_test;	/* 0x00z830 */
+		u64	ce_lsi_gb_int_mask;		/* 0x00z838 */
+		u64	ce_lsi_gb_pwr_dn1;		/* 0x00z840 */
+		u64	ce_lsi_gb_pwr_dn2;		/* 0x00z848 */
+		u64	ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */
+	} ce_lsi[2];
+
+	u64	ce_pad_004000[10];	    /* 0x004000 -- 0x004048 */
+
+	/*
+	 * CRM: Coretalk Receive Module Registers
+	 */
+	u64	ce_crm_debug_mux;			/* 0x004050 */
+	u64	ce_pad_004058;				/* 0x004058 */
+	u64	ce_crm_ssp_err_cmd_wrd;			/* 0x004060 */
+	u64	ce_crm_ssp_err_addr;			/* 0x004068 */
+	u64	ce_crm_ssp_err_syn;			/* 0x004070 */
+
+	u64	ce_pad_004078[499];	    /* 0x004078 -- 0x005008 */
+
+	/*
+         * CXM: Coretalk Xmit Module Registers
+         */
+	u64	ce_cxm_dyn_credit_status;		/* 0x005010 */
+	u64	ce_cxm_last_credit_status;		/* 0x005018 */
+	u64	ce_cxm_credit_limit;			/* 0x005020 */
+	u64	ce_cxm_force_credit;			/* 0x005028 */
+	u64	ce_cxm_disable_bypass;			/* 0x005030 */
+	u64	ce_pad_005038[3];	    /* 0x005038 -- 0x005048 */
+	u64	ce_cxm_debug_mux;			/* 0x005050 */
+
+        u64        ce_pad_005058[501];         /* 0x005058 -- 0x005FF8 */
+
+	/*
+	 * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
+	 * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000
+	 * DTL: the comment offsets at far right: let 'y' = {6 or 8}
+	 *
+	 * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
+	 * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000
+	 * UTL: the comment offsets at far right: let 'z' = {7 or 9}
+	 */
+	#define ce_dtl(link_num)	ce_dtl_utl[link_num-1]
+	#define ce_utl(link_num)	ce_dtl_utl[link_num-1]
+	struct ce_dtl_utl_reg {
+		/* DTL */
+		u64	ce_dtl_dtdr_credit_limit;	/* 0x00y000 */
+		u64	ce_dtl_dtdr_credit_force;	/* 0x00y008 */
+		u64	ce_dtl_dyn_credit_status;	/* 0x00y010 */
+		u64	ce_dtl_dtl_last_credit_stat;	/* 0x00y018 */
+		u64	ce_dtl_dtl_ctrl;		/* 0x00y020 */
+		u64	ce_pad_00y028[5];   /* 0x00y028 -- 0x00y048 */
+		u64	ce_dtl_debug_sel;		/* 0x00y050 */
+		u64	ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */
+
+		/* UTL */
+		u64	ce_utl_utl_ctrl;		/* 0x00z000 */
+		u64	ce_utl_debug_sel;		/* 0x00z008 */
+		u64	ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */
+	} ce_dtl_utl[2];
+
+	u64	ce_pad_00A000[514];	    /* 0x00A000 -- 0x00B008 */
+
+	/*
+	 * URE: Upstream Request Engine
+         */
+	u64	ce_ure_dyn_credit_status;		/* 0x00B010 */
+	u64	ce_ure_last_credit_status;		/* 0x00B018 */
+	u64	ce_ure_credit_limit;			/* 0x00B020 */
+	u64	ce_pad_00B028;				/* 0x00B028 */
+	u64	ce_ure_control;				/* 0x00B030 */
+	u64	ce_ure_status;				/* 0x00B038 */
+	u64	ce_pad_00B040[2];	    /* 0x00B040 -- 0x00B048 */
+	u64	ce_ure_debug_sel;			/* 0x00B050 */
+	u64	ce_ure_pcie_debug_sel;			/* 0x00B058 */
+	u64	ce_ure_ssp_err_cmd_wrd;			/* 0x00B060 */
+	u64	ce_ure_ssp_err_addr;			/* 0x00B068 */
+	u64	ce_ure_page_map;			/* 0x00B070 */
+	u64	ce_ure_dir_map[TIOCE_NUM_PORTS];	/* 0x00B078 */
+	u64	ce_ure_pipe_sel1;			/* 0x00B088 */
+	u64	ce_ure_pipe_mask1;			/* 0x00B090 */
+	u64	ce_ure_pipe_sel2;			/* 0x00B098 */
+	u64	ce_ure_pipe_mask2;			/* 0x00B0A0 */
+	u64	ce_ure_pcie1_credits_sent;		/* 0x00B0A8 */
+	u64	ce_ure_pcie1_credits_used;		/* 0x00B0B0 */
+	u64	ce_ure_pcie1_credit_limit;		/* 0x00B0B8 */
+	u64	ce_ure_pcie2_credits_sent;		/* 0x00B0C0 */
+	u64	ce_ure_pcie2_credits_used;		/* 0x00B0C8 */
+	u64	ce_ure_pcie2_credit_limit;		/* 0x00B0D0 */
+	u64	ce_ure_pcie_force_credit;		/* 0x00B0D8 */
+	u64	ce_ure_rd_tnum_val;			/* 0x00B0E0 */
+	u64	ce_ure_rd_tnum_rsp_rcvd;		/* 0x00B0E8 */
+	u64	ce_ure_rd_tnum_esent_timer;		/* 0x00B0F0 */
+	u64	ce_ure_rd_tnum_error;			/* 0x00B0F8 */
+	u64	ce_ure_rd_tnum_first_cl;		/* 0x00B100 */
+	u64	ce_ure_rd_tnum_link_buf;		/* 0x00B108 */
+	u64	ce_ure_wr_tnum_val;			/* 0x00B110 */
+	u64	ce_ure_sram_err_addr0;			/* 0x00B118 */
+	u64	ce_ure_sram_err_addr1;			/* 0x00B120 */
+	u64	ce_ure_sram_err_addr2;			/* 0x00B128 */
+	u64	ce_ure_sram_rd_addr0;			/* 0x00B130 */
+	u64	ce_ure_sram_rd_addr1;			/* 0x00B138 */
+	u64	ce_ure_sram_rd_addr2;			/* 0x00B140 */
+	u64	ce_ure_sram_wr_addr0;			/* 0x00B148 */
+	u64	ce_ure_sram_wr_addr1;			/* 0x00B150 */
+	u64	ce_ure_sram_wr_addr2;			/* 0x00B158 */
+	u64	ce_ure_buf_flush10;			/* 0x00B160 */
+	u64	ce_ure_buf_flush11;			/* 0x00B168 */
+	u64	ce_ure_buf_flush12;			/* 0x00B170 */
+	u64	ce_ure_buf_flush13;			/* 0x00B178 */
+	u64	ce_ure_buf_flush20;			/* 0x00B180 */
+	u64	ce_ure_buf_flush21;			/* 0x00B188 */
+	u64	ce_ure_buf_flush22;			/* 0x00B190 */
+	u64	ce_ure_buf_flush23;			/* 0x00B198 */
+	u64	ce_ure_pcie_control1;			/* 0x00B1A0 */
+	u64	ce_ure_pcie_control2;			/* 0x00B1A8 */
+
+	u64	ce_pad_00B1B0[458];	    /* 0x00B1B0 -- 0x00BFF8 */
+
+	/* Upstream Data Buffer, Port1 */
+	struct ce_ure_maint_ups_dat1_data {
+		u64	data63_0[512];	    /* 0x00C000 -- 0x00CFF8 */
+		u64	data127_64[512];    /* 0x00D000 -- 0x00DFF8 */
+		u64	parity[512];	    /* 0x00E000 -- 0x00EFF8 */
+	} ce_ure_maint_ups_dat1;
+
+	/* Upstream Header Buffer, Port1 */
+	struct ce_ure_maint_ups_hdr1_data {
+		u64	data63_0[512];	    /* 0x00F000 -- 0x00FFF8 */
+		u64	data127_64[512];    /* 0x010000 -- 0x010FF8 */
+		u64	parity[512];	    /* 0x011000 -- 0x011FF8 */
+	} ce_ure_maint_ups_hdr1;
+
+	/* Upstream Data Buffer, Port2 */
+	struct ce_ure_maint_ups_dat2_data {
+		u64	data63_0[512];	    /* 0x012000 -- 0x012FF8 */
+		u64	data127_64[512];    /* 0x013000 -- 0x013FF8 */
+		u64	parity[512];	    /* 0x014000 -- 0x014FF8 */
+	} ce_ure_maint_ups_dat2;
+
+	/* Upstream Header Buffer, Port2 */
+	struct ce_ure_maint_ups_hdr2_data {
+		u64	data63_0[512];	    /* 0x015000 -- 0x015FF8 */
+		u64	data127_64[512];    /* 0x016000 -- 0x016FF8 */
+		u64	parity[512];	    /* 0x017000 -- 0x017FF8 */
+	} ce_ure_maint_ups_hdr2;
+
+	/* Downstream Data Buffer */
+	struct ce_ure_maint_dns_dat_data {
+		u64	data63_0[512];	    /* 0x018000 -- 0x018FF8 */
+		u64	data127_64[512];    /* 0x019000 -- 0x019FF8 */
+		u64	parity[512];	    /* 0x01A000 -- 0x01AFF8 */
+	} ce_ure_maint_dns_dat;
+
+	/* Downstream Header Buffer */
+	struct	ce_ure_maint_dns_hdr_data {
+		u64	data31_0[64];	    /* 0x01B000 -- 0x01B1F8 */
+		u64	data95_32[64];	    /* 0x01B200 -- 0x01B3F8 */
+		u64	parity[64];	    /* 0x01B400 -- 0x01B5F8 */
+	} ce_ure_maint_dns_hdr;
+
+	/* RCI Buffer Data */
+	struct	ce_ure_maint_rci_data {
+		u64	data41_0[64];	    /* 0x01B600 -- 0x01B7F8 */
+		u64	data69_42[64];	    /* 0x01B800 -- 0x01B9F8 */
+	} ce_ure_maint_rci;
+
+	/* Response Queue */
+	u64	ce_ure_maint_rspq[64];	    /* 0x01BA00 -- 0x01BBF8 */
+
+	u64	ce_pad_01C000[4224];	    /* 0x01BC00 -- 0x023FF8 */
+
+	/* Admin Build-a-Packet Buffer */
+	struct	ce_adm_maint_bap_buf_data {
+		u64	data63_0[258];	    /* 0x024000 -- 0x024808 */
+		u64	data127_64[258];    /* 0x024810 -- 0x025018 */
+		u64	parity[258];	    /* 0x025020 -- 0x025828 */
+	} ce_adm_maint_bap_buf;
+
+	u64	ce_pad_025830[5370];	    /* 0x025830 -- 0x02FFF8 */
+
+	/* URE: 40bit PMU ATE Buffer */		    /* 0x030000 -- 0x037FF8 */
+	u64	ce_ure_ate40[TIOCE_NUM_M40_ATES];
+
+	/* URE: 32/40bit PMU ATE Buffer */	    /* 0x038000 -- 0x03BFF8 */
+	u64	ce_ure_ate3240[TIOCE_NUM_M3240_ATES];
+
+	u64	ce_pad_03C000[2050];	    /* 0x03C000 -- 0x040008 */
+
+	/*
+	 * DRE: Down Stream Request Engine
+         */
+	u64	ce_dre_dyn_credit_status1;		/* 0x040010 */
+	u64	ce_dre_dyn_credit_status2;		/* 0x040018 */
+	u64	ce_dre_last_credit_status1;		/* 0x040020 */
+	u64	ce_dre_last_credit_status2;		/* 0x040028 */
+	u64	ce_dre_credit_limit1;			/* 0x040030 */
+	u64	ce_dre_credit_limit2;			/* 0x040038 */
+	u64	ce_dre_force_credit1;			/* 0x040040 */
+	u64	ce_dre_force_credit2;			/* 0x040048 */
+	u64	ce_dre_debug_mux1;			/* 0x040050 */
+	u64	ce_dre_debug_mux2;			/* 0x040058 */
+	u64	ce_dre_ssp_err_cmd_wrd;			/* 0x040060 */
+	u64	ce_dre_ssp_err_addr;			/* 0x040068 */
+	u64	ce_dre_comp_err_cmd_wrd;		/* 0x040070 */
+	u64	ce_dre_comp_err_addr;			/* 0x040078 */
+	u64	ce_dre_req_status;			/* 0x040080 */
+	u64	ce_dre_config1;				/* 0x040088 */
+	u64	ce_dre_config2;				/* 0x040090 */
+	u64	ce_dre_config_req_status;		/* 0x040098 */
+	u64	ce_pad_0400A0[12];	    /* 0x0400A0 -- 0x0400F8 */
+	u64	ce_dre_dyn_fifo;			/* 0x040100 */
+	u64	ce_pad_040108[3];	    /* 0x040108 -- 0x040118 */
+	u64	ce_dre_last_fifo;			/* 0x040120 */
+
+	u64	ce_pad_040128[27];	    /* 0x040128 -- 0x0401F8 */
+
+	/* DRE Downstream Head Queue */
+	struct	ce_dre_maint_ds_head_queue {
+		u64	data63_0[32];	    /* 0x040200 -- 0x0402F8 */
+		u64	data127_64[32];	    /* 0x040300 -- 0x0403F8 */
+		u64	parity[32];	    /* 0x040400 -- 0x0404F8 */
+	} ce_dre_maint_ds_head_q;
+
+	u64	ce_pad_040500[352];	    /* 0x040500 -- 0x040FF8 */
+
+	/* DRE Downstream Data Queue */
+	struct	ce_dre_maint_ds_data_queue {
+		u64	data63_0[256];	    /* 0x041000 -- 0x0417F8 */
+		u64	ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */
+		u64	data127_64[256];    /* 0x042000 -- 0x0427F8 */
+		u64	ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */
+		u64	parity[256];	    /* 0x043000 -- 0x0437F8 */
+		u64	ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */
+	} ce_dre_maint_ds_data_q;
+
+	/* DRE URE Upstream Response Queue */
+	struct	ce_dre_maint_ure_us_rsp_queue {
+		u64	data63_0[8];	    /* 0x044000 -- 0x044038 */
+		u64	ce_pad_044040[24];  /* 0x044040 -- 0x0440F8 */
+		u64	data127_64[8];      /* 0x044100 -- 0x044138 */
+		u64	ce_pad_044140[24];  /* 0x044140 -- 0x0441F8 */
+		u64	parity[8];	    /* 0x044200 -- 0x044238 */
+		u64	ce_pad_044240[24];  /* 0x044240 -- 0x0442F8 */
+	} ce_dre_maint_ure_us_rsp_q;
+
+	u64 	ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */
+
+	u64	ce_end_of_struct;			/* 0x044400 */
+} tioce_t;
+
+/* ce_lsiX_gb_cfg1 register bit masks & shifts */
+#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT	0
+#define CE_LSI_GB_CFG1_RXL0S_THS_MASK	(0xffULL << 0)
+#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT	8
+#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK	(0xfULL << 8);
+#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT	12
+#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK	(0x7ULL << 12)
+#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT	15
+#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK	(0x1ULL << 15)
+#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT	16
+#define CE_LSI_GB_CFG1_LPBK_SEL_MASK	(0x3ULL << 16)
+#define CE_LSI_GB_CFG1_LPBK_EN_SHFT	18
+#define CE_LSI_GB_CFG1_LPBK_EN_MASK	(0x1ULL << 18)
+#define CE_LSI_GB_CFG1_RVRS_LB_SHFT	19
+#define CE_LSI_GB_CFG1_RVRS_LB_MASK	(0x1ULL << 19)
+#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT	20
+#define CE_LSI_GB_CFG1_RVRS_CLK_MASK	(0x3ULL << 20)
+#define CE_LSI_GB_CFG1_SLF_TS_SHFT	24
+#define CE_LSI_GB_CFG1_SLF_TS_MASK	(0xfULL << 24)
+
+/* ce_adm_int_mask/ce_adm_int_status register bit defines */
+#define CE_ADM_INT_CE_ERROR_SHFT		0
+#define CE_ADM_INT_LSI1_IP_ERROR_SHFT		1
+#define CE_ADM_INT_LSI2_IP_ERROR_SHFT		2
+#define CE_ADM_INT_PCIE_ERROR_SHFT		3
+#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT	4
+#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT	5
+#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT	6
+#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT	7
+#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT	8
+#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT	9
+#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT	10
+#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT	11
+#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT	12
+#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT	13
+#define CE_ADM_INT_PCIE_MSG_SHFT		14 /*see int_dest_14*/
+#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT		14
+#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT		15
+#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT		16
+#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT		17
+#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT	22
+#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT	23
+
+/* ce_adm_force_int register bit defines */
+#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT	0
+#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT	1
+#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT	2
+#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT	3
+#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT	4
+#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT	5
+#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT	6
+#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT	7
+#define CE_ADM_FORCE_INT_ALWAYS_SHFT		8
+
+/* ce_adm_int_dest register bit masks & shifts */
+#define INTR_VECTOR_SHFT			56
+
+/* ce_adm_error_mask and ce_adm_error_summary register bit masks */
+#define CE_ADM_ERR_CRM_SSP_REQ_INVALID			(0x1ULL <<  0)
+#define CE_ADM_ERR_SSP_REQ_HEADER			(0x1ULL <<  1)
+#define CE_ADM_ERR_SSP_RSP_HEADER			(0x1ULL <<  2)
+#define CE_ADM_ERR_SSP_PROTOCOL_ERROR			(0x1ULL <<  3)
+#define CE_ADM_ERR_SSP_SBE				(0x1ULL <<  4)
+#define CE_ADM_ERR_SSP_MBE				(0x1ULL <<  5)
+#define CE_ADM_ERR_CXM_CREDIT_OFLOW			(0x1ULL <<  6)
+#define CE_ADM_ERR_DRE_SSP_REQ_INVAL			(0x1ULL <<  7)
+#define CE_ADM_ERR_SSP_REQ_LONG				(0x1ULL <<  8)
+#define CE_ADM_ERR_SSP_REQ_OFLOW			(0x1ULL <<  9)
+#define CE_ADM_ERR_SSP_REQ_SHORT			(0x1ULL << 10)
+#define CE_ADM_ERR_SSP_REQ_SIDEBAND			(0x1ULL << 11)
+#define CE_ADM_ERR_SSP_REQ_ADDR_ERR			(0x1ULL << 12)
+#define CE_ADM_ERR_SSP_REQ_BAD_BE			(0x1ULL << 13)
+#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT			(0x1ULL << 14)
+#define CE_ADM_ERR_PCIE_UNEXP_COMPL			(0x1ULL << 15)
+#define CE_ADM_ERR_PCIE_ERR_COMPL			(0x1ULL << 16)
+#define CE_ADM_ERR_DRE_CREDIT_OFLOW			(0x1ULL << 17)
+#define CE_ADM_ERR_DRE_SRAM_PE				(0x1ULL << 18)
+#define CE_ADM_ERR_SSP_RSP_INVALID			(0x1ULL << 19)
+#define CE_ADM_ERR_SSP_RSP_LONG				(0x1ULL << 20)
+#define CE_ADM_ERR_SSP_RSP_SHORT			(0x1ULL << 21)
+#define CE_ADM_ERR_SSP_RSP_SIDEBAND			(0x1ULL << 22)
+#define CE_ADM_ERR_URE_SSP_RSP_UNEXP			(0x1ULL << 23)
+#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT		(0x1ULL << 24)
+#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT		(0x1ULL << 25)
+#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT		(0x1ULL << 26)
+#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT			(0x1ULL << 27)
+#define CE_ADM_ERR_URE_CREDIT_OFLOW			(0x1ULL << 28)
+#define CE_ADM_ERR_URE_SRAM_PE				(0x1ULL << 29)
+#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP			(0x1ULL << 30)
+#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT			(0x1ULL << 31)
+#define CE_ADM_ERR_MMR_ACCESS_ERROR			(0x1ULL << 32)
+#define CE_ADM_ERR_MMR_ADDR_ERROR			(0x1ULL << 33)
+#define CE_ADM_ERR_ADM_CREDIT_OFLOW			(0x1ULL << 34)
+#define CE_ADM_ERR_ADM_SRAM_PE				(0x1ULL << 35)
+#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR		(0x1ULL << 36)
+#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR		(0x1ULL << 37)
+#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR	(0x1ULL << 38)
+#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR	(0x1ULL << 39)
+#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR		(0x1ULL << 40)
+#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR		(0x1ULL << 41)
+#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR		(0x1ULL << 42)
+#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR		(0x1ULL << 43)
+#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR		(0x1ULL << 44)
+#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR		(0x1ULL << 45)
+#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR		(0x1ULL << 46)
+#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR		(0x1ULL << 47)
+#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR	(0x1ULL << 48)
+#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR	(0x1ULL << 49)
+#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR		(0x1ULL << 50)
+#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR		(0x1ULL << 51)
+#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR		(0x1ULL << 52)
+#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR		(0x1ULL << 53)
+#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR		(0x1ULL << 54)
+#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR		(0x1ULL << 55)
+#define CE_ADM_ERR_PORT1_PCIE_COR_ERR			(0x1ULL << 56)
+#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR			(0x1ULL << 57)
+#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR			(0x1ULL << 58)
+#define CE_ADM_ERR_PORT2_PCIE_COR_ERR			(0x1ULL << 59)
+#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR			(0x1ULL << 60)
+#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR			(0x1ULL << 61)
+
+/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */
+#define FLUSH_SEL_PORT1_PIPE0_SHFT	0
+#define FLUSH_SEL_PORT1_PIPE1_SHFT	4
+#define FLUSH_SEL_PORT1_PIPE2_SHFT	8
+#define FLUSH_SEL_PORT1_PIPE3_SHFT	12
+#define FLUSH_SEL_PORT2_PIPE0_SHFT	16
+#define FLUSH_SEL_PORT2_PIPE1_SHFT	20
+#define FLUSH_SEL_PORT2_PIPE2_SHFT	24
+#define FLUSH_SEL_PORT2_PIPE3_SHFT	28
+
+/* ce_dre_config1 register bit masks and shifts */
+#define CE_DRE_RO_ENABLE		(0x1ULL << 0)
+#define CE_DRE_DYN_RO_ENABLE		(0x1ULL << 1)
+#define CE_DRE_SUP_CONFIG_COMP_ERROR	(0x1ULL << 2)
+#define CE_DRE_SUP_IO_COMP_ERROR	(0x1ULL << 3)
+#define CE_DRE_ADDR_MODE_SHFT		4
+
+/* ce_dre_config_req_status register bit masks */
+#define CE_DRE_LAST_CONFIG_COMPLETION	(0x7ULL << 0)
+#define CE_DRE_DOWNSTREAM_CONFIG_ERROR	(0x1ULL << 3)
+#define CE_DRE_CONFIG_COMPLETION_VALID	(0x1ULL << 4)
+#define CE_DRE_CONFIG_REQUEST_ACTIVE	(0x1ULL << 5)
+
+/* ce_ure_control register bit masks & shifts */
+#define CE_URE_RD_MRG_ENABLE		(0x1ULL << 0)
+#define CE_URE_WRT_MRG_ENABLE1		(0x1ULL << 4)
+#define CE_URE_WRT_MRG_ENABLE2		(0x1ULL << 5)
+#define CE_URE_WRT_MRG_TIMER_SHFT	12
+#define CE_URE_WRT_MRG_TIMER_MASK	(0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT)
+#define CE_URE_WRT_MRG_TIMER(x)		(((u64)(x) << \
+					  CE_URE_WRT_MRG_TIMER_SHFT) & \
+					 CE_URE_WRT_MRG_TIMER_MASK)
+#define CE_URE_RSPQ_BYPASS_DISABLE	(0x1ULL << 24)
+#define CE_URE_UPS_DAT1_PAR_DISABLE	(0x1ULL << 32)
+#define CE_URE_UPS_HDR1_PAR_DISABLE	(0x1ULL << 33)
+#define CE_URE_UPS_DAT2_PAR_DISABLE	(0x1ULL << 34)
+#define CE_URE_UPS_HDR2_PAR_DISABLE	(0x1ULL << 35)
+#define CE_URE_ATE_PAR_DISABLE		(0x1ULL << 36)
+#define CE_URE_RCI_PAR_DISABLE		(0x1ULL << 37)
+#define CE_URE_RSPQ_PAR_DISABLE		(0x1ULL << 38)
+#define CE_URE_DNS_DAT_PAR_DISABLE	(0x1ULL << 39)
+#define CE_URE_DNS_HDR_PAR_DISABLE	(0x1ULL << 40)
+#define CE_URE_MALFORM_DISABLE		(0x1ULL << 44)
+#define CE_URE_UNSUP_DISABLE		(0x1ULL << 45)
+
+/* ce_ure_page_map register bit masks & shifts */
+#define CE_URE_ATE3240_ENABLE		(0x1ULL << 0)
+#define CE_URE_ATE40_ENABLE 		(0x1ULL << 1)
+#define CE_URE_PAGESIZE_SHFT		4
+#define CE_URE_PAGESIZE_MASK		(0x7ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_4K_PAGESIZE		(0x0ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_16K_PAGESIZE		(0x1ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_64K_PAGESIZE		(0x2ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_128K_PAGESIZE		(0x3ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_256K_PAGESIZE		(0x4ULL << CE_URE_PAGESIZE_SHFT)
+
+/* ce_ure_pipe_sel register bit masks & shifts */
+#define PKT_TRAFIC_SHRT			16
+#define BUS_SRC_ID_SHFT			8
+#define DEV_SRC_ID_SHFT			3
+#define FNC_SRC_ID_SHFT			0
+#define CE_URE_TC_MASK			(0x07ULL << PKT_TRAFIC_SHRT)
+#define CE_URE_BUS_MASK			(0xFFULL << BUS_SRC_ID_SHFT)
+#define CE_URE_DEV_MASK			(0x1FULL << DEV_SRC_ID_SHFT)
+#define CE_URE_FNC_MASK			(0x07ULL << FNC_SRC_ID_SHFT)
+#define CE_URE_PIPE_BUS(b)		(((u64)(b) << BUS_SRC_ID_SHFT) & \
+					 CE_URE_BUS_MASK)
+#define CE_URE_PIPE_DEV(d)		(((u64)(d) << DEV_SRC_ID_SHFT) & \
+					 CE_URE_DEV_MASK)
+#define CE_URE_PIPE_FNC(f)		(((u64)(f) << FNC_SRC_ID_SHFT) & \
+					 CE_URE_FNC_MASK)
+
+#define CE_URE_SEL1_SHFT		0
+#define CE_URE_SEL2_SHFT		20
+#define CE_URE_SEL3_SHFT		40
+#define CE_URE_SEL1_MASK		(0x7FFFFULL << CE_URE_SEL1_SHFT)
+#define CE_URE_SEL2_MASK		(0x7FFFFULL << CE_URE_SEL2_SHFT)
+#define CE_URE_SEL3_MASK		(0x7FFFFULL << CE_URE_SEL3_SHFT)
+
+
+/* ce_ure_pipe_mask register bit masks & shifts */
+#define CE_URE_MASK1_SHFT		0
+#define CE_URE_MASK2_SHFT		20
+#define CE_URE_MASK3_SHFT		40
+#define CE_URE_MASK1_MASK		(0x7FFFFULL << CE_URE_MASK1_SHFT)
+#define CE_URE_MASK2_MASK		(0x7FFFFULL << CE_URE_MASK2_SHFT)
+#define CE_URE_MASK3_MASK		(0x7FFFFULL << CE_URE_MASK3_SHFT)
+
+
+/* ce_ure_pcie_control1 register bit masks & shifts */
+#define CE_URE_SI			(0x1ULL << 0)
+#define CE_URE_ELAL_SHFT		4
+#define CE_URE_ELAL_MASK		(0x7ULL << CE_URE_ELAL_SHFT)
+#define CE_URE_ELAL_SET(n)		(((u64)(n) << CE_URE_ELAL_SHFT) & \
+					 CE_URE_ELAL_MASK)
+#define CE_URE_ELAL1_SHFT		8
+#define CE_URE_ELAL1_MASK		(0x7ULL << CE_URE_ELAL1_SHFT)
+#define CE_URE_ELAL1_SET(n)		(((u64)(n) << CE_URE_ELAL1_SHFT) & \
+					 CE_URE_ELAL1_MASK)
+#define CE_URE_SCC			(0x1ULL << 12)
+#define CE_URE_PN1_SHFT			16
+#define CE_URE_PN1_MASK			(0xFFULL << CE_URE_PN1_SHFT)
+#define CE_URE_PN2_SHFT			24
+#define CE_URE_PN2_MASK			(0xFFULL << CE_URE_PN2_SHFT)
+#define CE_URE_PN1_SET(n)		(((u64)(n) << CE_URE_PN1_SHFT) & \
+					 CE_URE_PN1_MASK)
+#define CE_URE_PN2_SET(n)		(((u64)(n) << CE_URE_PN2_SHFT) & \
+					 CE_URE_PN2_MASK)
+
+/* ce_ure_pcie_control2 register bit masks & shifts */
+#define CE_URE_ABP			(0x1ULL << 0)
+#define CE_URE_PCP			(0x1ULL << 1)
+#define CE_URE_MSP			(0x1ULL << 2)
+#define CE_URE_AIP			(0x1ULL << 3)
+#define CE_URE_PIP			(0x1ULL << 4)
+#define CE_URE_HPS			(0x1ULL << 5)
+#define CE_URE_HPC			(0x1ULL << 6)
+#define CE_URE_SPLV_SHFT		7
+#define CE_URE_SPLV_MASK		(0xFFULL << CE_URE_SPLV_SHFT)
+#define CE_URE_SPLV_SET(n)		(((u64)(n) << CE_URE_SPLV_SHFT) & \
+					 CE_URE_SPLV_MASK)
+#define CE_URE_SPLS_SHFT		15
+#define CE_URE_SPLS_MASK		(0x3ULL << CE_URE_SPLS_SHFT)
+#define CE_URE_SPLS_SET(n)		(((u64)(n) << CE_URE_SPLS_SHFT) & \
+					 CE_URE_SPLS_MASK)
+#define CE_URE_PSN1_SHFT		19
+#define CE_URE_PSN1_MASK		(0x1FFFULL << CE_URE_PSN1_SHFT)
+#define CE_URE_PSN2_SHFT		32
+#define CE_URE_PSN2_MASK		(0x1FFFULL << CE_URE_PSN2_SHFT)
+#define CE_URE_PSN1_SET(n)		(((u64)(n) << CE_URE_PSN1_SHFT) & \
+					 CE_URE_PSN1_MASK)
+#define CE_URE_PSN2_SET(n)		(((u64)(n) << CE_URE_PSN2_SHFT) & \
+					 CE_URE_PSN2_MASK)
+
+/*
+ * PIO address space ranges for CE
+ */
+
+/* Local CE Registers Space */
+#define CE_PIO_MMR			0x00000000
+#define CE_PIO_MMR_LEN			0x04000000
+
+/* PCI Compatible Config Space */
+#define CE_PIO_CONFIG_SPACE		0x04000000
+#define CE_PIO_CONFIG_SPACE_LEN		0x04000000
+
+/* PCI I/O Space Alias */
+#define CE_PIO_IO_SPACE_ALIAS		0x08000000
+#define CE_PIO_IO_SPACE_ALIAS_LEN	0x08000000
+
+/* PCI Enhanced Config Space */
+#define CE_PIO_E_CONFIG_SPACE		0x10000000
+#define CE_PIO_E_CONFIG_SPACE_LEN	0x10000000
+
+/* PCI I/O Space */
+#define CE_PIO_IO_SPACE			0x100000000
+#define CE_PIO_IO_SPACE_LEN		0x100000000
+
+/* PCI MEM Space */
+#define CE_PIO_MEM_SPACE		0x200000000
+#define CE_PIO_MEM_SPACE_LEN		TIO_HWIN_SIZE
+
+
+/*
+ * CE PCI Enhanced Config Space shifts & masks
+ */
+#define CE_E_CONFIG_BUS_SHFT		20
+#define CE_E_CONFIG_BUS_MASK		(0xFF << CE_E_CONFIG_BUS_SHFT)
+#define CE_E_CONFIG_DEVICE_SHFT		15
+#define CE_E_CONFIG_DEVICE_MASK		(0x1F << CE_E_CONFIG_DEVICE_SHFT)
+#define CE_E_CONFIG_FUNC_SHFT		12
+#define CE_E_CONFIG_FUNC_MASK		(0x7  << CE_E_CONFIG_FUNC_SHFT)
+
+#endif /* __ASM_IA64_SN_TIOCE_H__ */
diff --git a/arch/ia64/include/asm/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h
new file mode 100644
index 00000000000..32c32f30b09
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tioce_provider.h
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_CE_PROVIDER_H
+#define _ASM_IA64_SN_CE_PROVIDER_H
+
+#include <asm/sn/pcibus_provider_defs.h>
+#include <asm/sn/tioce.h>
+
+/*
+ * Common TIOCE structure shared between the prom and kernel
+ *
+ * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE
+ * PROM VERSION.
+ */
+struct tioce_common {
+	struct pcibus_bussoft	ce_pcibus;	/* common pciio header */
+
+	u32		ce_rev;
+	u64		ce_kernel_private;
+	u64		ce_prom_private;
+};
+
+struct tioce_kernel {
+	struct tioce_common	*ce_common;
+	spinlock_t		ce_lock;
+	struct list_head	ce_dmamap_list;
+
+	u64		ce_ate40_shadow[TIOCE_NUM_M40_ATES];
+	u64		ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
+	u32		ce_ate3240_pagesize;
+
+	u8			ce_port1_secondary;
+
+	/* per-port resources */
+	struct {
+		int 		dirmap_refcnt;
+		u64	dirmap_shadow;
+	} ce_port[TIOCE_NUM_PORTS];
+};
+
+struct tioce_dmamap {
+	struct list_head	ce_dmamap_list;	/* headed by tioce_kernel */
+	u32		refcnt;
+
+	u64		nbytes;		/* # bytes mapped */
+
+	u64		ct_start;	/* coretalk start address */
+	u64		pci_start;	/* bus start address */
+
+	u64		__iomem *ate_hw;/* hw ptr of first ate in map */
+	u64		*ate_shadow;	/* shadow ptr of firat ate */
+	u16		ate_count;	/* # ate's in the map */
+};
+
+extern int tioce_init_provider(void);
+
+#endif  /* __ASM_IA64_SN_CE_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h
new file mode 100644
index 00000000000..e8ad0bb5b6c
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tiocp.h
@@ -0,0 +1,257 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_TIOCP_H
+#define _ASM_IA64_SN_PCI_TIOCP_H
+
+#define TIOCP_HOST_INTR_ADDR            0x003FFFFFFFFFFFFFUL
+#define TIOCP_PCI64_CMDTYPE_MEM         (0x1ull << 60)
+#define TIOCP_PCI64_CMDTYPE_MSI         (0x3ull << 60)
+
+
+/*****************************************************************************
+ *********************** TIOCP MMR structure mapping ***************************
+ *****************************************************************************/
+
+struct tiocp{
+
+    /* 0x000000-0x00FFFF -- Local Registers */
+
+    /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */
+    u64		cp_id;				/* 0x000000 */
+    u64		cp_stat;			/* 0x000008 */
+    u64		cp_err_upper;			/* 0x000010 */
+    u64		cp_err_lower;			/* 0x000018 */
+    #define cp_err cp_err_lower
+    u64		cp_control;			/* 0x000020 */
+    u64		cp_req_timeout;			/* 0x000028 */
+    u64		cp_intr_upper;			/* 0x000030 */
+    u64		cp_intr_lower;			/* 0x000038 */
+    #define cp_intr cp_intr_lower
+    u64		cp_err_cmdword;			/* 0x000040 */
+    u64		_pad_000048;			/* 0x000048 */
+    u64		cp_tflush;			/* 0x000050 */
+
+    /* 0x000058-0x00007F -- Bridge-specific Configuration */
+    u64		cp_aux_err;			/* 0x000058 */
+    u64		cp_resp_upper;			/* 0x000060 */
+    u64		cp_resp_lower;			/* 0x000068 */
+    #define cp_resp cp_resp_lower
+    u64		cp_tst_pin_ctrl;		/* 0x000070 */
+    u64		cp_addr_lkerr;			/* 0x000078 */
+
+    /* 0x000080-0x00008F -- PMU & MAP */
+    u64		cp_dir_map;			/* 0x000080 */
+    u64		_pad_000088;			/* 0x000088 */
+
+    /* 0x000090-0x00009F -- SSRAM */
+    u64		cp_map_fault;			/* 0x000090 */
+    u64		_pad_000098;			/* 0x000098 */
+
+    /* 0x0000A0-0x0000AF -- Arbitration */
+    u64		cp_arb;				/* 0x0000A0 */
+    u64		_pad_0000A8;			/* 0x0000A8 */
+
+    /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
+    u64		cp_ate_parity_err;		/* 0x0000B0 */
+    u64		_pad_0000B8;			/* 0x0000B8 */
+
+    /* 0x0000C0-0x0000FF -- PCI/GIO */
+    u64		cp_bus_timeout;			/* 0x0000C0 */
+    u64		cp_pci_cfg;			/* 0x0000C8 */
+    u64		cp_pci_err_upper;		/* 0x0000D0 */
+    u64		cp_pci_err_lower;		/* 0x0000D8 */
+    #define cp_pci_err cp_pci_err_lower
+    u64		_pad_0000E0[4];			/* 0x0000{E0..F8} */
+
+    /* 0x000100-0x0001FF -- Interrupt */
+    u64		cp_int_status;			/* 0x000100 */
+    u64		cp_int_enable;			/* 0x000108 */
+    u64		cp_int_rst_stat;		/* 0x000110 */
+    u64		cp_int_mode;			/* 0x000118 */
+    u64		cp_int_device;			/* 0x000120 */
+    u64		cp_int_host_err;		/* 0x000128 */
+    u64		cp_int_addr[8];			/* 0x0001{30,,,68} */
+    u64		cp_err_int_view;		/* 0x000170 */
+    u64		cp_mult_int;			/* 0x000178 */
+    u64		cp_force_always[8];		/* 0x0001{80,,,B8} */
+    u64		cp_force_pin[8];		/* 0x0001{C0,,,F8} */
+
+    /* 0x000200-0x000298 -- Device */
+    u64		cp_device[4];			/* 0x0002{00,,,18} */
+    u64		_pad_000220[4];			/* 0x0002{20,,,38} */
+    u64		cp_wr_req_buf[4];		/* 0x0002{40,,,58} */
+    u64		_pad_000260[4];			/* 0x0002{60,,,78} */
+    u64		cp_rrb_map[2];			/* 0x0002{80,,,88} */
+    #define cp_even_resp cp_rrb_map[0]			/* 0x000280 */
+    #define cp_odd_resp  cp_rrb_map[1]			/* 0x000288 */
+    u64		cp_resp_status;			/* 0x000290 */
+    u64		cp_resp_clear;			/* 0x000298 */
+
+    u64		_pad_0002A0[12];		/* 0x0002{A0..F8} */
+
+    /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
+    struct {
+	u64	upper;				/* 0x0003{00,,,F0} */
+	u64	lower;				/* 0x0003{08,,,F8} */
+    } cp_buf_addr_match[16];
+
+    /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
+    struct {
+	u64	flush_w_touch;			/* 0x000{400,,,5C0} */
+	u64	flush_wo_touch;			/* 0x000{408,,,5C8} */
+	u64	inflight;			/* 0x000{410,,,5D0} */
+	u64	prefetch;			/* 0x000{418,,,5D8} */
+	u64	total_pci_retry;		/* 0x000{420,,,5E0} */
+	u64	max_pci_retry;			/* 0x000{428,,,5E8} */
+	u64	max_latency;			/* 0x000{430,,,5F0} */
+	u64	clear_all;			/* 0x000{438,,,5F8} */
+    } cp_buf_count[8];
+
+
+    /* 0x000600-0x0009FF -- PCI/X registers */
+    u64		cp_pcix_bus_err_addr;		/* 0x000600 */
+    u64		cp_pcix_bus_err_attr;		/* 0x000608 */
+    u64		cp_pcix_bus_err_data;		/* 0x000610 */
+    u64		cp_pcix_pio_split_addr;		/* 0x000618 */
+    u64		cp_pcix_pio_split_attr;		/* 0x000620 */
+    u64		cp_pcix_dma_req_err_attr;	/* 0x000628 */
+    u64		cp_pcix_dma_req_err_addr;	/* 0x000630 */
+    u64		cp_pcix_timeout;		/* 0x000638 */
+
+    u64		_pad_000640[24];		/* 0x000{640,,,6F8} */
+
+    /* 0x000700-0x000737 -- Debug Registers */
+    u64		cp_ct_debug_ctl;		/* 0x000700 */
+    u64		cp_br_debug_ctl;		/* 0x000708 */
+    u64		cp_mux3_debug_ctl;		/* 0x000710 */
+    u64		cp_mux4_debug_ctl;		/* 0x000718 */
+    u64		cp_mux5_debug_ctl;		/* 0x000720 */
+    u64		cp_mux6_debug_ctl;		/* 0x000728 */
+    u64		cp_mux7_debug_ctl;		/* 0x000730 */
+
+    u64		_pad_000738[89];		/* 0x000{738,,,9F8} */
+
+    /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
+    struct {
+	u64	cp_buf_addr;			/* 0x000{A00,,,AF0} */
+	u64	cp_buf_attr;			/* 0X000{A08,,,AF8} */
+    } cp_pcix_read_buf_64[16];
+
+    struct {
+	u64	cp_buf_addr;			/* 0x000{B00,,,BE0} */
+	u64	cp_buf_attr;			/* 0x000{B08,,,BE8} */
+	u64	cp_buf_valid;			/* 0x000{B10,,,BF0} */
+	u64	__pad1;				/* 0x000{B18,,,BF8} */
+    } cp_pcix_write_buf_64[8];
+
+    /* End of Local Registers -- Start of Address Map space */
+
+    char	_pad_000c00[0x010000 - 0x000c00];
+
+    /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */
+    u64		cp_int_ate_ram[1024];		/* 0x010000-0x011FF8 */
+
+    char	_pad_012000[0x14000 - 0x012000];
+
+    /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */
+    u64		cp_int_ate_ram_mp[1024];	/* 0x014000-0x015FF8 */
+
+    char	_pad_016000[0x18000 - 0x016000];
+
+    /* 0x18000-0x197F8 -- TIOCP Write Request Ram */
+    u64		cp_wr_req_lower[256];		/* 0x18000 - 0x187F8 */
+    u64		cp_wr_req_upper[256];		/* 0x18800 - 0x18FF8 */
+    u64		cp_wr_req_parity[256];		/* 0x19000 - 0x197F8 */
+
+    char	_pad_019800[0x1C000 - 0x019800];
+
+    /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */
+    u64		cp_rd_resp_lower[512];		/* 0x1C000 - 0x1CFF8 */
+    u64		cp_rd_resp_upper[512];		/* 0x1D000 - 0x1DFF8 */
+    u64		cp_rd_resp_parity[512];		/* 0x1E000 - 0x1EFF8 */
+
+    char	_pad_01F000[0x20000 - 0x01F000];
+
+    /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used)  */
+    char	_pad_020000[0x021000 - 0x20000];
+
+    /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */
+    union {
+	u8	c[0x1000 / 1];			/* 0x02{0000,,,7FFF} */
+	u16	s[0x1000 / 2];			/* 0x02{0000,,,7FFF} */
+	u32	l[0x1000 / 4];			/* 0x02{0000,,,7FFF} */
+	u64	d[0x1000 / 8];			/* 0x02{0000,,,7FFF} */
+	union {
+	    u8	c[0x100 / 1];
+	    u16	s[0x100 / 2];
+	    u32	l[0x100 / 4];
+	    u64	d[0x100 / 8];
+	} f[8];
+    } cp_type0_cfg_dev[7];				/* 0x02{1000,,,7FFF} */
+
+    /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
+    union {
+	u8	c[0x1000 / 1];			/* 0x028000-0x029000 */
+	u16	s[0x1000 / 2];			/* 0x028000-0x029000 */
+	u32	l[0x1000 / 4];			/* 0x028000-0x029000 */
+	u64	d[0x1000 / 8];			/* 0x028000-0x029000 */
+	union {
+	    u8	c[0x100 / 1];
+	    u16	s[0x100 / 2];
+	    u32	l[0x100 / 4];
+	    u64	d[0x100 / 8];
+	} f[8];
+    } cp_type1_cfg;					/* 0x028000-0x029000 */
+
+    char		_pad_029000[0x030000-0x029000];
+
+    /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
+    union {
+	u8	c[8 / 1];
+	u16	s[8 / 2];
+	u32	l[8 / 4];
+	u64	d[8 / 8];
+    } cp_pci_iack;					/* 0x030000-0x030007 */
+
+    char		_pad_030007[0x040000-0x030008];
+
+    /* 0x040000-0x040007 -- PCIX Special Cycle */
+    union {
+	u8	c[8 / 1];
+	u16	s[8 / 2];
+	u32	l[8 / 4];
+	u64	d[8 / 8];
+    } cp_pcix_cycle;					/* 0x040000-0x040007 */
+
+    char		_pad_040007[0x200000-0x040008];
+
+    /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */
+    union {
+	u8	c[0x100000 / 1];
+	u16	s[0x100000 / 2];
+	u32	l[0x100000 / 4];
+	u64	d[0x100000 / 8];
+    } cp_devio_raw[6];					/* 0x200000-0x7FFFFF */
+
+    #define cp_devio(n)  cp_devio_raw[((n)<2)?(n*2):(n+2)]
+
+    char		_pad_800000[0xA00000-0x800000];
+
+    /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush  */
+    union {
+	u8	c[0x100000 / 1];
+	u16	s[0x100000 / 2];
+	u32	l[0x100000 / 4];
+	u64	d[0x100000 / 8];
+    } cp_devio_raw_flush[6];				/* 0xA00000-0xBFFFFF */
+
+    #define cp_devio_flush(n)  cp_devio_raw_flush[((n)<2)?(n*2):(n+2)]
+
+};
+
+#endif 	/* _ASM_IA64_SN_PCI_TIOCP_H */
diff --git a/arch/ia64/include/asm/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h
new file mode 100644
index 00000000000..d29728492f3
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tiocx.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_TIO_TIOCX_H
+#define _ASM_IA64_SN_TIO_TIOCX_H
+
+#ifdef __KERNEL__
+
+struct cx_id_s {
+	unsigned int part_num;
+	unsigned int mfg_num;
+	int nasid;
+};
+
+struct cx_dev {
+	struct cx_id_s cx_id;
+	int bt;				/* board/blade type */
+	void *soft;			/* driver specific */
+	struct hubdev_info *hubdev;
+	struct device dev;
+	struct cx_drv *driver;
+};
+
+struct cx_device_id {
+	unsigned int part_num;
+	unsigned int mfg_num;
+};
+
+struct cx_drv {
+	char *name;
+	const struct cx_device_id *id_table;
+	struct device_driver driver;
+	int (*probe) (struct cx_dev * dev, const struct cx_device_id * id);
+	int (*remove) (struct cx_dev * dev);
+};
+
+/* create DMA address by stripping AS bits */
+#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL)
+
+#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) |  \
+                                  ((((u64)(a)) & 0xffffc000000000UL) <<2))
+
+#define TIO_CE_ASIC_PARTNUM 0xce00
+#define TIOCX_CORELET 3
+
+/* These are taken from tio_mmr_as.h */
+#define TIO_ICE_FRZ_CFG               TIO_MMR_ADDR_MOD(0x00000000b0008100UL)
+#define TIO_ICE_PMI_TX_CFG            TIO_MMR_ADDR_MOD(0x00000000b000b100UL)
+#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL)
+#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL
+
+#define to_cx_dev(n) container_of(n, struct cx_dev, dev)
+#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver)
+
+extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int);
+extern void tiocx_irq_free(struct sn_irq_info *);
+extern int cx_device_unregister(struct cx_dev *);
+extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
+extern int cx_driver_unregister(struct cx_drv *);
+extern int cx_driver_register(struct cx_drv *);
+extern u64 tiocx_dma_addr(u64 addr);
+extern u64 tiocx_swin_base(int nasid);
+extern void tiocx_mmr_store(int nasid, u64 offset, u64 value);
+extern u64 tiocx_mmr_load(int nasid, u64 offset);
+
+#endif				//  __KERNEL__
+#endif				// _ASM_IA64_SN_TIO_TIOCX__
diff --git a/arch/ia64/include/asm/sn/types.h b/arch/ia64/include/asm/sn/types.h
new file mode 100644
index 00000000000..8e04ee211e5
--- /dev/null
+++ b/arch/ia64/include/asm/sn/types.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_TYPES_H
+#define _ASM_IA64_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long 	cpuid_t;
+typedef signed short	nasid_t;	/* node id in numa-as-id space */
+typedef signed char	partid_t;	/* partition ID type */
+typedef unsigned int    moduleid_t;     /* user-visible module number type */
+typedef unsigned int    cmoduleid_t;    /* kernel compact module id type */
+typedef unsigned char	slotid_t;	/* slot (blade) within module */
+typedef unsigned char	slabid_t;	/* slab (asic) within slot */
+typedef u64 nic_t;
+typedef unsigned long iopaddr_t;
+typedef unsigned long paddr_t;
+typedef short cnodeid_t;
+
+#endif /* _ASM_IA64_SN_TYPES_H */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
new file mode 100644
index 00000000000..d5ef0aa3e31
--- /dev/null
+++ b/arch/ia64/include/asm/socket.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_SOCKET_H
+#define _ASM_IA64_SOCKET_H
+
+/*
+ * Socket related defines.
+ *
+ * Based on <asm-i386/socket.h>.
+ *
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE		25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC             31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/include/asm/sockios.h b/arch/ia64/include/asm/sockios.h
new file mode 100644
index 00000000000..15c92468ad3
--- /dev/null
+++ b/arch/ia64/include/asm/sockios.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_IA64_SOCKIOS_H
+#define _ASM_IA64_SOCKIOS_H
+
+/*
+ * Socket-level I/O control calls.
+ *
+ * Based on <asm-i386/sockios.h>.
+ *
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_IA64_SOCKIOS_H */
diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
new file mode 100644
index 00000000000..67a7c40ec27
--- /dev/null
+++ b/arch/ia64/include/asm/sparsemem.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_IA64_SPARSEMEM_H
+#define _ASM_IA64_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * SECTION_SIZE_BITS            2^N: how big each section will be
+ * MAX_PHYSMEM_BITS             2^N: how much memory we can have in that space
+ */
+
+#define SECTION_SIZE_BITS	(30)
+#define MAX_PHYSMEM_BITS	(50)
+#ifdef CONFIG_FORCE_MAX_ZONEORDER
+#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#undef SECTION_SIZE_BITS
+#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
+#endif
+#endif
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _ASM_IA64_SPARSEMEM_H */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
new file mode 100644
index 00000000000..0229fb95fb3
--- /dev/null
+++ b/arch/ia64/include/asm/spinlock.h
@@ -0,0 +1,220 @@
+#ifndef _ASM_IA64_SPINLOCK_H
+#define _ASM_IA64_SPINLOCK_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *
+ * This file is used for SMP configurations only.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/intrinsics.h>
+#include <asm/system.h>
+
+#define __raw_spin_lock_init(x)			((x)->lock = 0)
+
+#ifdef ASM_SUPPORTED
+/*
+ * Try to get the lock.  If we fail to get the lock, make a non-standard call to
+ * ia64_spinlock_contention().  We do not use a normal call because that would force all
+ * callers of __raw_spin_lock() to be non-leaf routines.  Instead, ia64_spinlock_contention() is
+ * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered".
+ */
+
+#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+
+static inline void
+__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags)
+{
+	register volatile unsigned int *ptr asm ("r31") = &lock->lock;
+
+#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
+# ifdef CONFIG_ITANIUM
+	/* don't use brl on Itanium... */
+	asm volatile ("{\n\t"
+		      "  mov ar.ccv = r0\n\t"
+		      "  mov r28 = ip\n\t"
+		      "  mov r30 = 1;;\n\t"
+		      "}\n\t"
+		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
+		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov b6 = r29;;\n\t"
+		      "mov r27=%2\n\t"
+		      "(p14) br.cond.spnt.many b6"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+	asm volatile ("{\n\t"
+		      "  mov ar.ccv = r0\n\t"
+		      "  mov r28 = ip\n\t"
+		      "  mov r30 = 1;;\n\t"
+		      "}\n\t"
+		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov r27=%2\n\t"
+		      "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#else
+# ifdef CONFIG_ITANIUM
+	/* don't use brl on Itanium... */
+	/* mis-declare, so we get the entry-point, not it's function descriptor: */
+	asm volatile ("mov r30 = 1\n\t"
+		      "mov r27=%2\n\t"
+		      "mov ar.ccv = r0;;\n\t"
+		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
+		      "movl r29 = ia64_spinlock_contention;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov b6 = r29;;\n\t"
+		      "(p14) br.call.spnt.many b6 = b6"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+	asm volatile ("mov r30 = 1\n\t"
+		      "mov r27=%2\n\t"
+		      "mov ar.ccv = r0;;\n\t"
+		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#endif
+}
+
+#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
+
+/* Unlock by doing an ordered store and releasing the cacheline with nta */
+static inline void __raw_spin_unlock(raw_spinlock_t *x) {
+	barrier();
+	asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x));
+}
+
+#else /* !ASM_SUPPORTED */
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+# define __raw_spin_lock(x)								\
+do {											\
+	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
+	__u64 ia64_spinlock_val;							\
+	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
+	if (unlikely(ia64_spinlock_val)) {						\
+		do {									\
+			while (*ia64_spinlock_ptr)					\
+				ia64_barrier();						\
+			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
+		} while (ia64_spinlock_val);						\
+	}										\
+} while (0)
+#define __raw_spin_unlock(x)	do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0)
+#endif /* !ASM_SUPPORTED */
+
+#define __raw_spin_is_locked(x)		((x)->lock != 0)
+#define __raw_spin_trylock(x)		(cmpxchg_acq(&(x)->lock, 0, 1) == 0)
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+#define __raw_read_can_lock(rw)		(*(volatile int *)(rw) >= 0)
+#define __raw_write_can_lock(rw)	(*(volatile int *)(rw) == 0)
+
+#define __raw_read_lock(rw)								\
+do {											\
+	raw_rwlock_t *__read_lock_ptr = (rw);						\
+											\
+	while (unlikely(ia64_fetchadd(1, (int *) __read_lock_ptr, acq) < 0)) {		\
+		ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);			\
+		while (*(volatile int *)__read_lock_ptr < 0)				\
+			cpu_relax();							\
+	}										\
+} while (0)
+
+#define __raw_read_unlock(rw)					\
+do {								\
+	raw_rwlock_t *__read_lock_ptr = (rw);			\
+	ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);	\
+} while (0)
+
+#ifdef ASM_SUPPORTED
+#define __raw_write_lock(rw)							\
+do {										\
+ 	__asm__ __volatile__ (							\
+		"mov ar.ccv = r0\n"						\
+		"dep r29 = -1, r0, 31, 1;;\n"					\
+		"1:\n"								\
+		"ld4 r2 = [%0];;\n"						\
+		"cmp4.eq p0,p7 = r0,r2\n"					\
+		"(p7) br.cond.spnt.few 1b \n"					\
+		"cmpxchg4.acq r2 = [%0], r29, ar.ccv;;\n"			\
+		"cmp4.eq p0,p7 = r0, r2\n"					\
+		"(p7) br.cond.spnt.few 1b;;\n"					\
+		:: "r"(rw) : "ar.ccv", "p7", "r2", "r29", "memory");		\
+} while(0)
+
+#define __raw_write_trylock(rw)							\
+({										\
+	register long result;							\
+										\
+	__asm__ __volatile__ (							\
+		"mov ar.ccv = r0\n"						\
+		"dep r29 = -1, r0, 31, 1;;\n"					\
+		"cmpxchg4.acq %0 = [%1], r29, ar.ccv\n"				\
+		: "=r"(result) : "r"(rw) : "ar.ccv", "r29", "memory");		\
+	(result == 0);								\
+})
+
+static inline void __raw_write_unlock(raw_rwlock_t *x)
+{
+	u8 *y = (u8 *)x;
+	barrier();
+	asm volatile ("st1.rel.nta [%0] = r0\n\t" :: "r"(y+3) : "memory" );
+}
+
+#else /* !ASM_SUPPORTED */
+
+#define __raw_write_lock(l)								\
+({											\
+	__u64 ia64_val, ia64_set_val = ia64_dep_mi(-1, 0, 31, 1);			\
+	__u32 *ia64_write_lock_ptr = (__u32 *) (l);					\
+	do {										\
+		while (*ia64_write_lock_ptr)						\
+			ia64_barrier();							\
+		ia64_val = ia64_cmpxchg4_acq(ia64_write_lock_ptr, ia64_set_val, 0);	\
+	} while (ia64_val);								\
+})
+
+#define __raw_write_trylock(rw)						\
+({									\
+	__u64 ia64_val;							\
+	__u64 ia64_set_val = ia64_dep_mi(-1, 0, 31,1);			\
+	ia64_val = ia64_cmpxchg4_acq((__u32 *)(rw), ia64_set_val, 0);	\
+	(ia64_val == 0);						\
+})
+
+static inline void __raw_write_unlock(raw_rwlock_t *x)
+{
+	barrier();
+	x->write_lock = 0;
+}
+
+#endif /* !ASM_SUPPORTED */
+
+static inline int __raw_read_trylock(raw_rwlock_t *x)
+{
+	union {
+		raw_rwlock_t lock;
+		__u32 word;
+	} old, new;
+	old.lock = new.lock = *x;
+	old.lock.write_lock = new.lock.write_lock = 0;
+	++new.lock.read_counter;
+	return (u32)ia64_cmpxchg4_acq((__u32 *)(x), new.word, old.word) == old.word;
+}
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /*  _ASM_IA64_SPINLOCK_H */
diff --git a/arch/ia64/include/asm/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..474e46f1ab4
--- /dev/null
+++ b/arch/ia64/include/asm/spinlock_types.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_SPINLOCK_TYPES_H
+#define _ASM_IA64_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int read_counter	: 31;
+	volatile unsigned int write_lock	:  1;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0, 0 }
+
+#endif
diff --git a/arch/ia64/include/asm/stat.h b/arch/ia64/include/asm/stat.h
new file mode 100644
index 00000000000..367bb90cdff
--- /dev/null
+++ b/arch/ia64/include/asm/stat.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_STAT_H
+#define _ASM_IA64_STAT_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+struct stat {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+	unsigned long	st_rdev;
+	unsigned long	st_size;
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	unsigned long	st_blksize;
+	long		st_blocks;
+	unsigned long	__unused[3];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct ia64_oldstat {
+	unsigned int	st_dev;
+	unsigned int	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	st_rdev;
+	unsigned int	__pad1;
+	unsigned long	st_size;
+	unsigned long	st_atime;
+	unsigned long	st_mtime;
+	unsigned long	st_ctime;
+	unsigned int	st_blksize;
+	int		st_blocks;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_IA64_STAT_H */
diff --git a/arch/ia64/include/asm/statfs.h b/arch/ia64/include/asm/statfs.h
new file mode 100644
index 00000000000..811097974f3
--- /dev/null
+++ b/arch/ia64/include/asm/statfs.h
@@ -0,0 +1,62 @@
+#ifndef _ASM_IA64_STATFS_H
+#define _ASM_IA64_STATFS_H
+
+/*
+ * Based on <asm-i386/statfs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#ifndef __KERNEL_STRICT_NAMES
+# include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * This is ugly --- we're already 64-bit, so just duplicate the definitions
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+} __attribute__((packed));
+
+#endif /* _ASM_IA64_STATFS_H */
diff --git a/arch/ia64/include/asm/string.h b/arch/ia64/include/asm/string.h
new file mode 100644
index 00000000000..85fd65c52a8
--- /dev/null
+++ b/arch/ia64/include/asm/string.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_STRING_H
+#define _ASM_IA64_STRING_H
+
+/*
+ * Here is where we want to put optimized versions of the string
+ * routines.
+ *
+ * Copyright (C) 1998-2000, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#define __HAVE_ARCH_STRLEN	1 /* see arch/ia64/lib/strlen.S */
+#define __HAVE_ARCH_MEMSET	1 /* see arch/ia64/lib/memset.S */
+#define __HAVE_ARCH_MEMCPY	1 /* see arch/ia64/lib/memcpy.S */
+
+extern __kernel_size_t strlen (const char *);
+extern void *memcpy (void *, const void *, __kernel_size_t);
+extern void *memset (void *, int, __kernel_size_t);
+
+#endif /* _ASM_IA64_STRING_H */
diff --git a/arch/ia64/include/asm/suspend.h b/arch/ia64/include/asm/suspend.h
new file mode 100644
index 00000000000..b05bbb6074e
--- /dev/null
+++ b/arch/ia64/include/asm/suspend.h
@@ -0,0 +1 @@
+/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/arch/ia64/include/asm/system.h b/arch/ia64/include/asm/system.h
new file mode 100644
index 00000000000..927a381c20c
--- /dev/null
+++ b/arch/ia64/include/asm/system.h
@@ -0,0 +1,292 @@
+#ifndef _ASM_IA64_SYSTEM_H
+#define _ASM_IA64_SYSTEM_H
+
+/*
+ * System defines. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.  This is based
+ * on information published in the Processor Abstraction Layer
+ * and the System Abstraction Layer manual.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <asm/kregs.h>
+#include <asm/page.h>
+#include <asm/pal.h>
+#include <asm/percpu.h>
+
+#define GATE_ADDR		RGN_BASE(RGN_GATE)
+
+/*
+ * 0xa000000000000000+2*PERCPU_PAGE_SIZE
+ * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
+ */
+#define KERNEL_START		 (GATE_ADDR+__IA64_UL_CONST(0x100000000))
+#define PERCPU_ADDR		(-PERCPU_PAGE_SIZE)
+#define LOAD_OFFSET		(KERNEL_START - KERNEL_TR_PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
+
+struct pci_vector_struct {
+	__u16 segment;	/* PCI Segment number */
+	__u16 bus;	/* PCI Bus number */
+	__u32 pci_id;	/* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
+	__u8 pin;	/* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
+	__u32 irq;	/* IRQ assigned */
+};
+
+extern struct ia64_boot_param {
+	__u64 command_line;		/* physical address of command line arguments */
+	__u64 efi_systab;		/* physical address of EFI system table */
+	__u64 efi_memmap;		/* physical address of EFI memory map */
+	__u64 efi_memmap_size;		/* size of EFI memory map */
+	__u64 efi_memdesc_size;		/* size of an EFI memory map descriptor */
+	__u32 efi_memdesc_version;	/* memory descriptor version */
+	struct {
+		__u16 num_cols;	/* number of columns on console output device */
+		__u16 num_rows;	/* number of rows on console output device */
+		__u16 orig_x;	/* cursor's x position */
+		__u16 orig_y;	/* cursor's y position */
+	} console_info;
+	__u64 fpswa;		/* physical address of the fpswa interface */
+	__u64 initrd_start;
+	__u64 initrd_size;
+} *ia64_boot_param;
+
+/*
+ * Macros to force memory ordering.  In these descriptions, "previous"
+ * and "subsequent" refer to program order; "visible" means that all
+ * architecturally visible effects of a memory access have occurred
+ * (at a minimum, this means the memory has been read or written).
+ *
+ *   wmb():	Guarantees that all preceding stores to memory-
+ *		like regions are visible before any subsequent
+ *		stores and that all following stores will be
+ *		visible only after all previous stores.
+ *   rmb():	Like wmb(), but for reads.
+ *   mb():	wmb()/rmb() combo, i.e., all previous memory
+ *		accesses are visible before all subsequent
+ *		accesses and vice versa.  This is also known as
+ *		a "fence."
+ *
+ * Note: "mb()" and its variants cannot be used as a fence to order
+ * accesses to memory mapped I/O registers.  For that, mf.a needs to
+ * be used.  However, we don't want to always use mf.a because (a)
+ * it's (presumably) much slower than mf and (b) mf.a is supported for
+ * sequential memory pages only.
+ */
+#define mb()	ia64_mf()
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_SMP
+# define smp_mb()	mb()
+# define smp_rmb()	rmb()
+# define smp_wmb()	wmb()
+# define smp_read_barrier_depends()	read_barrier_depends()
+#else
+# define smp_mb()	barrier()
+# define smp_rmb()	barrier()
+# define smp_wmb()	barrier()
+# define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+/*
+ * XXX check on this ---I suspect what Linus really wants here is
+ * acquire vs release semantics but we can't discuss this stuff with
+ * Linus just yet.  Grrr...
+ */
+#define set_mb(var, value)	do { (var) = (value); mb(); } while (0)
+
+#define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */
+
+/*
+ * The group barrier in front of the rsm & ssm are necessary to ensure
+ * that none of the previous instructions in the same group are
+ * affected by the rsm/ssm.
+ */
+/* For spinlocks etc */
+
+/*
+ * - clearing psr.i is implicitly serialized (visible by next insn)
+ * - setting psr.i requires data serialization
+ * - we need a stop-bit before reading PSR because we sometimes
+ *   write a floating-point register right before reading the PSR
+ *   and that writes to PSR.mfl
+ */
+#ifdef CONFIG_PARAVIRT
+#define __local_save_flags()	ia64_get_psr_i()
+#else
+#define __local_save_flags()	ia64_getreg(_IA64_REG_PSR)
+#endif
+
+#define __local_irq_save(x)			\
+do {						\
+	ia64_stop();				\
+	(x) = __local_save_flags();		\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_disable()			\
+do {						\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_restore(x)	ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
+
+#ifdef CONFIG_IA64_DEBUG_IRQ
+
+  extern unsigned long last_cli_ip;
+
+# define __save_ip()		last_cli_ip = ia64_getreg(_IA64_REG_IP)
+
+# define local_irq_save(x)					\
+do {								\
+	unsigned long __psr;					\
+								\
+	__local_irq_save(__psr);				\
+	if (__psr & IA64_PSR_I)					\
+		__save_ip();					\
+	(x) = __psr;						\
+} while (0)
+
+# define local_irq_disable()	do { unsigned long __x; local_irq_save(__x); } while (0)
+
+# define local_irq_restore(x)					\
+do {								\
+	unsigned long __old_psr, __psr = (x);			\
+								\
+	local_save_flags(__old_psr);				\
+	__local_irq_restore(__psr);				\
+	if ((__old_psr & IA64_PSR_I) && !(__psr & IA64_PSR_I))	\
+		__save_ip();					\
+} while (0)
+
+#else /* !CONFIG_IA64_DEBUG_IRQ */
+# define local_irq_save(x)	__local_irq_save(x)
+# define local_irq_disable()	__local_irq_disable()
+# define local_irq_restore(x)	__local_irq_restore(x)
+#endif /* !CONFIG_IA64_DEBUG_IRQ */
+
+#define local_irq_enable()	({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
+#define local_save_flags(flags)	({ ia64_stop(); (flags) = __local_save_flags(); })
+
+#define irqs_disabled()				\
+({						\
+	unsigned long __ia64_id_flags;		\
+	local_save_flags(__ia64_id_flags);	\
+	(__ia64_id_flags & IA64_PSR_I) == 0;	\
+})
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_IA32_SUPPORT
+# define IS_IA32_PROCESS(regs)	(ia64_psr(regs)->is != 0)
+#else
+# define IS_IA32_PROCESS(regs)		0
+struct task_struct;
+static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
+static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
+#endif
+
+/*
+ * Context switch from one thread to another.  If the two threads have
+ * different address spaces, schedule() has already taken care of
+ * switching to the new address space by calling switch_mm().
+ *
+ * Disabling access to the fph partition and the debug-register
+ * context switch MUST be done before calling ia64_switch_to() since a
+ * newly created thread returns directly to
+ * ia64_ret_from_syscall_clear_r8.
+ */
+extern struct task_struct *ia64_switch_to (void *next_task);
+
+struct task_struct;
+
+extern void ia64_save_extra (struct task_struct *task);
+extern void ia64_load_extra (struct task_struct *task);
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
+# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
+#else
+# define IA64_ACCOUNT_ON_SWITCH(p,n)
+#endif
+
+#ifdef CONFIG_PERFMON
+  DECLARE_PER_CPU(unsigned long, pfm_syst_info);
+# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
+#else
+# define PERFMON_IS_SYSWIDE() (0)
+#endif
+
+#define IA64_HAS_EXTRA_STATE(t)							\
+	((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)	\
+	 || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())
+
+#define __switch_to(prev,next,last) do {							 \
+	IA64_ACCOUNT_ON_SWITCH(prev, next);							 \
+	if (IA64_HAS_EXTRA_STATE(prev))								 \
+		ia64_save_extra(prev);								 \
+	if (IA64_HAS_EXTRA_STATE(next))								 \
+		ia64_load_extra(next);								 \
+	ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next);			 \
+	(last) = ia64_switch_to((next));							 \
+} while (0)
+
+#ifdef CONFIG_SMP
+/*
+ * In the SMP case, we save the fph state when context-switching away from a thread that
+ * modified fph.  This way, when the thread gets scheduled on another CPU, the CPU can
+ * pick up the state from task->thread.fph, avoiding the complication of having to fetch
+ * the latest fph state from another CPU.  In other words: eager save, lazy restore.
+ */
+# define switch_to(prev,next,last) do {						\
+	if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) {				\
+		ia64_psr(task_pt_regs(prev))->mfh = 0;			\
+		(prev)->thread.flags |= IA64_THREAD_FPH_VALID;			\
+		__ia64_save_fpu((prev)->thread.fph);				\
+	}									\
+	__switch_to(prev, next, last);						\
+	/* "next" in old context is "current" in new context */			\
+	if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) &&	       \
+		     (task_cpu(current) !=				       \
+		      		      task_thread_info(current)->last_cpu))) { \
+		platform_migrate(current);				       \
+		task_thread_info(current)->last_cpu = task_cpu(current);       \
+	}								       \
+} while (0)
+#else
+# define switch_to(prev,next,last)	__switch_to(prev, next, last)
+#endif
+
+#define __ARCH_WANT_UNLOCKED_CTXSW
+#define ARCH_HAS_PREFETCH_SWITCH_STACK
+#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
+
+void cpu_idle_wait(void);
+
+#define arch_align_stack(x) (x)
+
+void default_idle(void);
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_system_vtime(struct task_struct *);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SYSTEM_H */
diff --git a/arch/ia64/include/asm/termbits.h b/arch/ia64/include/asm/termbits.h
new file mode 100644
index 00000000000..9f162e0089a
--- /dev/null
+++ b/arch/ia64/include/asm/termbits.h
@@ -0,0 +1,207 @@
+#ifndef _ASM_IA64_TERMBITS_H
+#define _ASM_IA64_TERMBITS_H
+
+/*
+ * Based on <asm-i386/termbits.h>.
+ *
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added new baudrates
+ */
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* input baud rate */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_IA64_TERMBITS_H */
diff --git a/arch/ia64/include/asm/termios.h b/arch/ia64/include/asm/termios.h
new file mode 100644
index 00000000000..689d218c0c2
--- /dev/null
+++ b/arch/ia64/include/asm/termios.h
@@ -0,0 +1,97 @@
+#ifndef _ASM_IA64_TERMIOS_H
+#define _ASM_IA64_TERMIOS_H
+
+/*
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added N_IRDA and N_SMSBLOCK
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+# ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) {	\
+	unsigned short __tmp;				\
+	get_user(__tmp,&(termio)->x);			\
+	*(unsigned short *) &(termios)->x = __tmp;	\
+}
+
+#define user_termio_to_kernel_termios(termios, termio)		\
+({								\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);		\
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC);	\
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios)		\
+({								\
+	put_user((termios)->c_iflag, &(termio)->c_iflag);	\
+	put_user((termios)->c_oflag, &(termio)->c_oflag);	\
+	put_user((termios)->c_cflag, &(termio)->c_cflag);	\
+	put_user((termios)->c_lflag, &(termio)->c_lflag);	\
+	put_user((termios)->c_line,  &(termio)->c_line);	\
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);	\
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+# endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_TERMIOS_H */
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
new file mode 100644
index 00000000000..7c60fcdd2ef
--- /dev/null
+++ b/arch/ia64/include/asm/thread_info.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_THREAD_INFO_H
+#define _ASM_IA64_THREAD_INFO_H
+
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+#define PREEMPT_ACTIVE_BIT 30
+#define PREEMPT_ACTIVE	(1 << PREEMPT_ACTIVE_BIT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * On IA-64, we want to keep the task structure and kernel stack together, so they can be
+ * mapped by a single TLB entry and so they can be addressed by the "current" pointer
+ * without having to do pointer masking.
+ */
+struct thread_info {
+	struct task_struct *task;	/* XXX not really needed, except for dup_task_struct() */
+	struct exec_domain *exec_domain;/* execution domain */
+	__u32 flags;			/* thread_info flags (see TIF_*) */
+	__u32 cpu;			/* current CPU */
+	__u32 last_cpu;			/* Last CPU thread ran on */
+	__u32 status;			/* Thread synchronous flags */
+	mm_segment_t addr_limit;	/* user-level address space limit */
+	int preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
+	struct restart_block restart_block;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	__u64 ac_stamp;
+	__u64 ac_leave;
+	__u64 ac_stime;
+	__u64 ac_utime;
+#endif
+};
+
+#define THREAD_SIZE			KERNEL_STACK_SIZE
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= 0,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifndef ASM_OFFSETS_C
+/* how to get the thread information struct from C */
+#define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
+#define alloc_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#define task_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#else
+#define current_thread_info()	((struct thread_info *) 0)
+#define alloc_thread_info(tsk)	((struct thread_info *) 0)
+#define task_thread_info(tsk)	((struct thread_info *) 0)
+#endif
+#define free_thread_info(ti)	/* nothing */
+#define task_stack_page(tsk)	((void *)(tsk))
+
+#define __HAVE_THREAD_FUNCTIONS
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#define setup_thread_stack(p, org)			\
+	*task_thread_info(p) = *task_thread_info(org);	\
+	task_thread_info(p)->ac_stime = 0;		\
+	task_thread_info(p)->ac_utime = 0;		\
+	task_thread_info(p)->task = (p);
+#else
+#define setup_thread_stack(p, org) \
+	*task_thread_info(p) = *task_thread_info(org); \
+	task_thread_info(p)->task = (p);
+#endif
+#define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET)
+
+#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
+#define alloc_task_struct()	((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER))
+#define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
+
+#define tsk_set_notify_resume(tsk) \
+	set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME)
+extern void tsk_clear_notify_resume(struct task_struct *tsk);
+#endif /* !__ASSEMBLY */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in least-significant 16 bits, other flags
+ *   in top 16 bits
+ */
+#define TIF_SIGPENDING		0	/* signal pending */
+#define TIF_NEED_RESCHED	1	/* rescheduling necessary */
+#define TIF_SYSCALL_TRACE	2	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
+#define TIF_NOTIFY_RESUME	6	/* resumption notification requested */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17
+#define TIF_MCA_INIT		18	/* this task is processing MCA or INIT */
+#define TIF_DB_DISABLED		19	/* debug trap disabled for fsyscall */
+#define TIF_FREEZE		20	/* is freezing for suspend */
+#define TIF_RESTORE_RSE		21	/* user RBS is newer than kernel RBS */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_TRACEAUDIT	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_MCA_INIT		(1 << TIF_MCA_INIT)
+#define _TIF_DB_DISABLED	(1 << TIF_DB_DISABLED)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_RESTORE_RSE	(1 << TIF_RESTORE_RSE)
+
+/* "work to do on user-return" bits */
+#define TIF_ALLWORK_MASK	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SYSCALL_AUDIT|\
+				 _TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE)
+/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */
+#define TIF_WORK_MASK		(TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
+
+#define TS_POLLING		1 	/* true if in idle loop and not sleeping */
+#define TS_RESTORE_SIGMASK	2	/* restore signal mask in do_signal() */
+
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/arch/ia64/include/asm/timex.h b/arch/ia64/include/asm/timex.h
new file mode 100644
index 00000000000..05a6baf8a47
--- /dev/null
+++ b/arch/ia64/include/asm/timex.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_TIMEX_H
+#define _ASM_IA64_TIMEX_H
+
+/*
+ * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * 2001/01/18 davidm	Removed CLOCK_TICK_RATE.  It makes no sense on IA-64.
+ *			Also removed cacheflush_time as it's entirely unused.
+ */
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+typedef unsigned long cycles_t;
+
+extern void (*ia64_udelay)(unsigned long usecs);
+
+/*
+ * For performance reasons, we don't want to define CLOCK_TICK_TRATE as
+ * local_cpu_data->itc_rate.  Fortunately, we don't have to, either: according to George
+ * Anzinger, 1/CLOCK_TICK_RATE is taken as the resolution of the timer clock.  The time
+ * calculation assumes that you will use enough of these so that your tick size <= 1/HZ.
+ * If the calculation shows that your CLOCK_TICK_RATE can not supply exactly 1/HZ ticks,
+ * the actual value is calculated and used to update the wall clock each jiffie.  Setting
+ * the CLOCK_TICK_RATE to x*HZ insures that the calculation will find no errors.  Hence we
+ * pick a multiple of HZ which gives us a (totally virtual) CLOCK_TICK_RATE of about
+ * 100MHz.
+ */
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+
+static inline cycles_t
+get_cycles (void)
+{
+	cycles_t ret;
+
+	ret = ia64_getreg(_IA64_REG_AR_ITC);
+	return ret;
+}
+
+#endif /* _ASM_IA64_TIMEX_H */
diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h
new file mode 100644
index 00000000000..20d8a39680c
--- /dev/null
+++ b/arch/ia64/include/asm/tlb.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_IA64_TLB_H
+#define _ASM_IA64_TLB_H
+/*
+ * Based on <asm-generic/tlb.h>.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * Removing a translation from a page table (including TLB-shootdown) is a four-step
+ * procedure:
+ *
+ *	(1) Flush (virtual) caches --- ensures virtual memory is coherent with kernel memory
+ *	    (this is a no-op on ia64).
+ *	(2) Clear the relevant portions of the page-table
+ *	(3) Flush the TLBs --- ensures that stale content is gone from CPU TLBs
+ *	(4) Release the pages that were freed up in step (2).
+ *
+ * Note that the ordering of these steps is crucial to avoid races on MP machines.
+ *
+ * The Linux kernel defines several platform-specific hooks for TLB-shootdown.  When
+ * unmapping a portion of the virtual address space, these hooks are called according to
+ * the following template:
+ *
+ *	tlb <- tlb_gather_mmu(mm, full_mm_flush);	// start unmap for address space MM
+ *	{
+ *	  for each vma that needs a shootdown do {
+ *	    tlb_start_vma(tlb, vma);
+ *	      for each page-table-entry PTE that needs to be removed do {
+ *		tlb_remove_tlb_entry(tlb, pte, address);
+ *		if (pte refers to a normal page) {
+ *		  tlb_remove_page(tlb, page);
+ *		}
+ *	      }
+ *	    tlb_end_vma(tlb, vma);
+ *	  }
+ *	}
+ *	tlb_finish_mmu(tlb, start, end);	// finish unmap for address space MM
+ */
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/processor.h>
+#include <asm/tlbflush.h>
+#include <asm/machvec.h>
+
+#ifdef CONFIG_SMP
+# define FREE_PTE_NR		2048
+# define tlb_fast_mode(tlb)	((tlb)->nr == ~0U)
+#else
+# define FREE_PTE_NR		0
+# define tlb_fast_mode(tlb)	(1)
+#endif
+
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		nr;		/* == ~0U => fast mode */
+	unsigned char		fullmm;		/* non-zero means full mm flush */
+	unsigned char		need_flush;	/* really unmapped some PTEs? */
+	unsigned long		start_addr;
+	unsigned long		end_addr;
+	struct page 		*pages[FREE_PTE_NR];
+};
+
+struct ia64_tr_entry {
+	u64 ifa;
+	u64 itir;
+	u64 pte;
+	u64 rr;
+}; /*Record for tr entry!*/
+
+extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size);
+extern void ia64_ptr_entry(u64 target_mask, int slot);
+
+extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
+
+/*
+ region register macros
+*/
+#define RR_TO_VE(val)   (((val) >> 0) & 0x0000000000000001)
+#define RR_VE(val)	(((val) & 0x0000000000000001) << 0)
+#define RR_VE_MASK	0x0000000000000001L
+#define RR_VE_SHIFT	0
+#define RR_TO_PS(val)	(((val) >> 2) & 0x000000000000003f)
+#define RR_PS(val)	(((val) & 0x000000000000003f) << 2)
+#define RR_PS_MASK	0x00000000000000fcL
+#define RR_PS_SHIFT	2
+#define RR_RID_MASK	0x00000000ffffff00L
+#define RR_TO_RID(val) 	((val >> 8) & 0xffffff)
+
+/* Users of the generic TLB shootdown code must declare this storage space. */
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/*
+ * Flush the TLB for address range START to END and, if not in fast mode, release the
+ * freed pages that where gathered up to this point.
+ */
+static inline void
+ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	unsigned int nr;
+
+	if (!tlb->need_flush)
+		return;
+	tlb->need_flush = 0;
+
+	if (tlb->fullmm) {
+		/*
+		 * Tearing down the entire address space.  This happens both as a result
+		 * of exit() and execve().  The latter case necessitates the call to
+		 * flush_tlb_mm() here.
+		 */
+		flush_tlb_mm(tlb->mm);
+	} else if (unlikely (end - start >= 1024*1024*1024*1024UL
+			     || REGION_NUMBER(start) != REGION_NUMBER(end - 1)))
+	{
+		/*
+		 * If we flush more than a tera-byte or across regions, we're probably
+		 * better off just flushing the entire TLB(s).  This should be very rare
+		 * and is not worth optimizing for.
+		 */
+		flush_tlb_all();
+	} else {
+		/*
+		 * XXX fix me: flush_tlb_range() should take an mm pointer instead of a
+		 * vma pointer.
+		 */
+		struct vm_area_struct vma;
+
+		vma.vm_mm = tlb->mm;
+		/* flush the address range from the tlb: */
+		flush_tlb_range(&vma, start, end);
+		/* now flush the virt. page-table area mapping the address range: */
+		flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
+	}
+
+	/* lastly, release the freed pages */
+	nr = tlb->nr;
+	if (!tlb_fast_mode(tlb)) {
+		unsigned long i;
+		tlb->nr = 0;
+		tlb->start_addr = ~0UL;
+		for (i = 0; i < nr; ++i)
+			free_page_and_swap_cache(tlb->pages[i]);
+	}
+}
+
+/*
+ * Return a pointer to an initialized struct mmu_gather.
+ */
+static inline struct mmu_gather *
+tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	/*
+	 * Use fast mode if only 1 CPU is online.
+	 *
+	 * It would be tempting to turn on fast-mode for full_mm_flush as well.  But this
+	 * doesn't work because of speculative accesses and software prefetching: the page
+	 * table of "mm" may (and usually is) the currently active page table and even
+	 * though the kernel won't do any user-space accesses during the TLB shoot down, a
+	 * compiler might use speculation or lfetch.fault on what happens to be a valid
+	 * user-space address.  This in turn could trigger a TLB miss fault (or a VHPT
+	 * walk) and re-insert a TLB entry we just removed.  Slow mode avoids such
+	 * problems.  (We could make fast-mode work by switching the current task to a
+	 * different "mm" during the shootdown.) --davidm 08/02/2002
+	 */
+	tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
+	tlb->fullmm = full_mm_flush;
+	tlb->start_addr = ~0UL;
+	return tlb;
+}
+
+/*
+ * Called at the end of the shootdown operation to free up any resources that were
+ * collected.
+ */
+static inline void
+tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	/*
+	 * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and
+	 * tlb->end_addr.
+	 */
+	ia64_tlb_flush_mmu(tlb, start, end);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+/*
+ * Logically, this routine frees PAGE.  On MP machines, the actual freeing of the page
+ * must be delayed until after the TLB has been flushed (see comments at the beginning of
+ * this file).
+ */
+static inline void
+tlb_remove_page (struct mmu_gather *tlb, struct page *page)
+{
+	tlb->need_flush = 1;
+
+	if (tlb_fast_mode(tlb)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	tlb->pages[tlb->nr++] = page;
+	if (tlb->nr >= FREE_PTE_NR)
+		ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr);
+}
+
+/*
+ * Remove TLB entry for PTE mapped at virtual address ADDRESS.  This is called for any
+ * PTE, not just those pointing to (normal) physical memory.
+ */
+static inline void
+__tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
+{
+	if (tlb->start_addr == ~0UL)
+		tlb->start_addr = address;
+	tlb->end_addr = address + PAGE_SIZE;
+}
+
+#define tlb_migrate_finish(mm)	platform_tlb_migrate_finish(mm)
+
+#define tlb_start_vma(tlb, vma)			do { } while (0)
+#define tlb_end_vma(tlb, vma)			do { } while (0)
+
+#define tlb_remove_tlb_entry(tlb, ptep, addr)		\
+do {							\
+	tlb->need_flush = 1;				\
+	__tlb_remove_tlb_entry(tlb, ptep, addr);	\
+} while (0)
+
+#define pte_free_tlb(tlb, ptep)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pte_free_tlb(tlb, ptep);			\
+} while (0)
+
+#define pmd_free_tlb(tlb, ptep)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pmd_free_tlb(tlb, ptep);			\
+} while (0)
+
+#define pud_free_tlb(tlb, pudp)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pud_free_tlb(tlb, pudp);			\
+} while (0)
+
+#endif /* _ASM_IA64_TLB_H */
diff --git a/arch/ia64/include/asm/tlbflush.h b/arch/ia64/include/asm/tlbflush.h
new file mode 100644
index 00000000000..3be25dfed16
--- /dev/null
+++ b/arch/ia64/include/asm/tlbflush.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_IA64_TLBFLUSH_H
+#define _ASM_IA64_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+
+/*
+ * Now for some TLB flushing routines.  This is the kind of stuff that
+ * can be very expensive, so try to avoid them whenever possible.
+ */
+extern void setup_ptcg_sem(int max_purges, int from_palo);
+
+/*
+ * Flush everything (kernel mapping may also have changed due to
+ * vmalloc/vfree).
+ */
+extern void local_flush_tlb_all (void);
+
+#ifdef CONFIG_SMP
+  extern void smp_flush_tlb_all (void);
+  extern void smp_flush_tlb_mm (struct mm_struct *mm);
+  extern void smp_flush_tlb_cpumask (cpumask_t xcpumask);
+# define flush_tlb_all()	smp_flush_tlb_all()
+#else
+# define flush_tlb_all()	local_flush_tlb_all()
+# define smp_flush_tlb_cpumask(m) local_flush_tlb_all()
+#endif
+
+static inline void
+local_finish_flush_tlb_mm (struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		activate_context(mm);
+}
+
+/*
+ * Flush a specified user mapping.  This is called, e.g., as a result of fork() and
+ * exit().  fork() ends up here because the copy-on-write mechanism needs to write-protect
+ * the PTEs of the parent task.
+ */
+static inline void
+flush_tlb_mm (struct mm_struct *mm)
+{
+	if (!mm)
+		return;
+
+	set_bit(mm->context, ia64_ctx.flushmap);
+	mm->context = 0;
+
+	if (atomic_read(&mm->mm_users) == 0)
+		return;		/* happens as a result of exit_mmap() */
+
+#ifdef CONFIG_SMP
+	smp_flush_tlb_mm(mm);
+#else
+	local_finish_flush_tlb_mm(mm);
+#endif
+}
+
+extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end);
+
+/*
+ * Page-granular tlb flush.
+ */
+static inline void
+flush_tlb_page (struct vm_area_struct *vma, unsigned long addr)
+{
+#ifdef CONFIG_SMP
+	flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE);
+#else
+	if (vma->vm_mm == current->active_mm)
+		ia64_ptcl(addr, (PAGE_SHIFT << 2));
+	else
+		vma->vm_mm->context = 0;
+#endif
+}
+
+/*
+ * Flush the local TLB. Invoked from another cpu using an IPI.
+ */
+#ifdef CONFIG_SMP
+void smp_local_flush_tlb(void);
+#else
+#define smp_local_flush_tlb()
+#endif
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	flush_tlb_all();	/* XXX fix me */
+}
+
+#endif /* _ASM_IA64_TLBFLUSH_H */
diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
new file mode 100644
index 00000000000..35bcb641c9e
--- /dev/null
+++ b/arch/ia64/include/asm/topology.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2002, Erich Focht, NEC
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _ASM_IA64_TOPOLOGY_H
+#define _ASM_IA64_TOPOLOGY_H
+
+#include <asm/acpi.h>
+#include <asm/numa.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_NUMA
+
+/* Nodes w/o CPUs are preferred for memory allocations, see build_zonelists */
+#define PENALTY_FOR_NODE_WITH_CPUS 255
+
+/*
+ * Distance above which we begin to use zone reclaim
+ */
+#define RECLAIM_DISTANCE 15
+
+/*
+ * Returns the number of the node containing CPU 'cpu'
+ */
+#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ */
+#define node_to_cpumask(node) (node_to_cpu_mask[node])
+
+/*
+ * Returns the number of the node containing Node 'nid'.
+ * Not implemented here. Multi-level hierarchies detected with
+ * the help of node_distance().
+ */
+#define parent_node(nid) (nid)
+
+/*
+ * Returns the number of the first CPU on Node 'node'.
+ */
+#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
+
+/*
+ * Determines the node for a given pci bus
+ */
+#define pcibus_to_node(bus) PCI_CONTROLLER(bus)->node
+
+void build_cpu_to_node_map(void);
+
+#define SD_CPU_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 1,			\
+	.max_interval		= 4,			\
+	.busy_factor		= 64,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 2,			\
+	.idle_idx		= 1,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_AFFINE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+/* sched_domains SD_NODE_INIT for IA64 NUMA machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 8*(min(num_online_cpus(), 32)), \
+	.busy_factor		= 64,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 2,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 64,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu)	(cpu_data(cpu)->socket_id)
+#define topology_core_id(cpu)			(cpu_data(cpu)->core_id)
+#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
+#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
+#define smt_capable() 				(smp_num_siblings > 1)
+#endif
+
+extern void arch_fix_phys_package_id(int num, u32 slot);
+
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
new file mode 100644
index 00000000000..e36b3716e71
--- /dev/null
+++ b/arch/ia64/include/asm/types.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_IA64_TYPES_H
+#define _ASM_IA64_TYPES_H
+
+/*
+ * This file is never included by application software unless explicitly requested (e.g.,
+ * via linux/types.h) in which case the application is Linux specific so (user-) name
+ * space pollution is not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * Based on <asm-alpha/types.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm-generic/int-l64.h>
+
+#ifdef __ASSEMBLY__
+# define __IA64_UL(x)		(x)
+# define __IA64_UL_CONST(x)	x
+
+# ifdef __KERNEL__
+#  define BITS_PER_LONG 64
+# endif
+
+#else
+# define __IA64_UL(x)		((unsigned long)(x))
+# define __IA64_UL_CONST(x)	x##UL
+
+typedef unsigned int umode_t;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+# ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+/* DMA addresses are 64-bits wide, in general.  */
+
+typedef u64 dma_addr_t;
+
+# endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_TYPES_H */
diff --git a/arch/ia64/include/asm/uaccess.h b/arch/ia64/include/asm/uaccess.h
new file mode 100644
index 00000000000..449c8c0fa2b
--- /dev/null
+++ b/arch/ia64/include/asm/uaccess.h
@@ -0,0 +1,401 @@
+#ifndef _ASM_IA64_UACCESS_H
+#define _ASM_IA64_UACCESS_H
+
+/*
+ * This file defines various macros to transfer memory areas across
+ * the user/kernel boundary.  This needs to be done carefully because
+ * this code is executed in kernel mode and uses user-specified
+ * addresses.  Thus, we need to be careful not to let the user to
+ * trick us into accessing kernel memory that would normally be
+ * inaccessible.  This code is also fairly performance sensitive,
+ * so we want to spend as little time doing safety checks as
+ * possible.
+ *
+ * To make matters a bit more interesting, these macros sometimes also
+ * called from within the kernel itself, in which case the address
+ * validity check must be skipped.  The get_fs() macro tells us what
+ * to do: if get_fs()==USER_DS, checking is performed, if
+ * get_fs()==KERNEL_DS, checking is bypassed.
+ *
+ * Note that even if the memory area specified by the user is in a
+ * valid address range, it is still possible that we'll get a page
+ * fault while accessing it.  This is handled by filling out an
+ * exception handler fixup entry for each instruction that has the
+ * potential to fault.  When such a fault occurs, the page fault
+ * handler checks to see whether the faulting instruction has a fixup
+ * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and
+ * then resumes execution at the continuation point.
+ *
+ * Based on <asm-alpha/uaccess.h>.
+ *
+ * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/page-flags.h>
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+
+/*
+ * For historical reasons, the following macros are grossly misnamed:
+ */
+#define KERNEL_DS	((mm_segment_t) { ~0UL })		/* cf. access_ok() */
+#define USER_DS		((mm_segment_t) { TASK_SIZE-1 })	/* cf. access_ok() */
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_ds()  (KERNEL_DS)
+#define get_fs()  (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+/*
+ * When accessing user memory, we need to make sure the entire area really is in
+ * user-level space.  In order to do this efficiently, we make sure that the page at
+ * address TASK_SIZE is never valid.  We also need to make sure that the address doesn't
+ * point inside the virtually mapped linear page table.
+ */
+#define __access_ok(addr, size, segment)						\
+({											\
+	__chk_user_ptr(addr);								\
+	(likely((unsigned long) (addr) <= (segment).seg)				\
+	 && ((segment).seg == KERNEL_DS.seg						\
+	     || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT)));	\
+})
+#define access_ok(type, addr, size)	__access_ok((addr), (size), get_fs())
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x, ptr)	__put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs())
+#define get_user(x, ptr)	__get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr)	__put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+extern long __put_user_unaligned_unknown (void);
+
+#define __put_user_unaligned(x, ptr)								\
+({												\
+	long __ret;										\
+	switch (sizeof(*(ptr))) {								\
+		case 1: __ret = __put_user((x), (ptr)); break;					\
+		case 2: __ret = (__put_user((x), (u8 __user *)(ptr)))				\
+			| (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
+		case 4: __ret = (__put_user((x), (u16 __user *)(ptr)))				\
+			| (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
+		case 8: __ret = (__put_user((x), (u32 __user *)(ptr)))				\
+			| (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
+		default: __ret = __put_user_unaligned_unknown();				\
+	}											\
+	__ret;											\
+})
+
+extern long __get_user_unaligned_unknown (void);
+
+#define __get_user_unaligned(x, ptr)								\
+({												\
+	long __ret;										\
+	switch (sizeof(*(ptr))) {								\
+		case 1: __ret = __get_user((x), (ptr)); break;					\
+		case 2: __ret = (__get_user((x), (u8 __user *)(ptr)))				\
+			| (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
+		case 4: __ret = (__get_user((x), (u16 __user *)(ptr)))				\
+			| (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
+		case 8: __ret = (__get_user((x), (u32 __user *)(ptr)))				\
+			| (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
+		default: __ret = __get_user_unaligned_unknown();				\
+	}											\
+	__ret;											\
+})
+
+#ifdef ASM_SUPPORTED
+  struct __large_struct { unsigned long buf[100]; };
+# define __m(x) (*(struct __large_struct __user *)(x))
+
+/* We need to declare the __ex_table section before we can use it in .xdata.  */
+asm (".section \"__ex_table\", \"a\"\n\t.previous");
+
+# define __get_user_size(val, addr, n, err)							\
+do {												\
+	register long __gu_r8 asm ("r8") = 0;							\
+	register long __gu_r9 asm ("r9");							\
+	asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n"	\
+	     "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n"						\
+	     "[1:]"										\
+	     : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8));			\
+	(err) = __gu_r8;									\
+	(val) = __gu_r9;									\
+} while (0)
+
+/*
+ * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it.  This
+ * is because they do not write to any memory gcc knows about, so there are no aliasing
+ * issues.
+ */
+# define __put_user_size(val, addr, n, err)							\
+do {												\
+	register long __pu_r8 asm ("r8") = 0;							\
+	asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n"	\
+		      "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n"					\
+		      "[1:]"									\
+		      : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8));		\
+	(err) = __pu_r8;									\
+} while (0)
+
+#else /* !ASM_SUPPORTED */
+# define RELOC_TYPE	2	/* ip-rel */
+# define __get_user_size(val, addr, n, err)				\
+do {									\
+	__ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE);	\
+	(err) = ia64_getreg(_IA64_REG_R8);				\
+	(val) = ia64_getreg(_IA64_REG_R9);				\
+} while (0)
+# define __put_user_size(val, addr, n, err)							\
+do {												\
+	__st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val));	\
+	(err) = ia64_getreg(_IA64_REG_R8);							\
+} while (0)
+#endif /* !ASM_SUPPORTED */
+
+extern void __get_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 and r9 (among others).  Thus, be careful not to evaluate it while
+ * using r8/r9.
+ */
+#define __do_get_user(check, x, ptr, size, segment)					\
+({											\
+	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);				\
+	__typeof__ (size) __gu_size = (size);						\
+	long __gu_err = -EFAULT;							\
+	unsigned long __gu_val = 0;							\
+	if (!check || __access_ok(__gu_ptr, size, segment))				\
+		switch (__gu_size) {							\
+		      case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break;	\
+		      case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break;	\
+		      case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break;	\
+		      case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break;	\
+		      default: __get_user_unknown(); break;				\
+		}									\
+	(x) = (__typeof__(*(__gu_ptr))) __gu_val;					\
+	__gu_err;									\
+})
+
+#define __get_user_nocheck(x, ptr, size)	__do_get_user(0, x, ptr, size, KERNEL_DS)
+#define __get_user_check(x, ptr, size, segment)	__do_get_user(1, x, ptr, size, segment)
+
+extern void __put_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 (among others).  Thus, be careful not to evaluate them while using r8.
+ */
+#define __do_put_user(check, x, ptr, size, segment)					\
+({											\
+	__typeof__ (x) __pu_x = (x);							\
+	__typeof__ (*(ptr)) __user *__pu_ptr = (ptr);					\
+	__typeof__ (size) __pu_size = (size);						\
+	long __pu_err = -EFAULT;							\
+											\
+	if (!check || __access_ok(__pu_ptr, __pu_size, segment))			\
+		switch (__pu_size) {							\
+		      case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break;	\
+		      case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break;	\
+		      case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break;	\
+		      case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break;	\
+		      default: __put_user_unknown(); break;				\
+		}									\
+	__pu_err;									\
+})
+
+#define __put_user_nocheck(x, ptr, size)	__do_put_user(0, x, ptr, size, KERNEL_DS)
+#define __put_user_check(x, ptr, size, segment)	__do_put_user(1, x, ptr, size, segment)
+
+/*
+ * Complex access routines
+ */
+extern unsigned long __must_check __copy_user (void __user *to, const void __user *from,
+					       unsigned long count);
+
+static inline unsigned long
+__copy_to_user (void __user *to, const void *from, unsigned long count)
+{
+	return __copy_user(to, (__force void __user *) from, count);
+}
+
+static inline unsigned long
+__copy_from_user (void *to, const void __user *from, unsigned long count)
+{
+	return __copy_user((__force void __user *) to, from, count);
+}
+
+#define __copy_to_user_inatomic		__copy_to_user
+#define __copy_from_user_inatomic	__copy_from_user
+#define copy_to_user(to, from, n)							\
+({											\
+	void __user *__cu_to = (to);							\
+	const void *__cu_from = (from);							\
+	long __cu_len = (n);								\
+											\
+	if (__access_ok(__cu_to, __cu_len, get_fs()))					\
+		__cu_len = __copy_user(__cu_to, (__force void __user *) __cu_from, __cu_len);	\
+	__cu_len;									\
+})
+
+#define copy_from_user(to, from, n)							\
+({											\
+	void *__cu_to = (to);								\
+	const void __user *__cu_from = (from);						\
+	long __cu_len = (n);								\
+											\
+	__chk_user_ptr(__cu_from);							\
+	if (__access_ok(__cu_from, __cu_len, get_fs()))					\
+		__cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len);	\
+	__cu_len;									\
+})
+
+#define __copy_in_user(to, from, size)	__copy_user((to), (from), (size))
+
+static inline unsigned long
+copy_in_user (void __user *to, const void __user *from, unsigned long n)
+{
+	if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n)))
+		n = __copy_user(to, from, n);
+	return n;
+}
+
+extern unsigned long __do_clear_user (void __user *, unsigned long);
+
+#define __clear_user(to, n)		__do_clear_user(to, n)
+
+#define clear_user(to, n)					\
+({								\
+	unsigned long __cu_len = (n);				\
+	if (__access_ok(to, __cu_len, get_fs()))		\
+		__cu_len = __do_clear_user(to, __cu_len);	\
+	__cu_len;						\
+})
+
+
+/*
+ * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else
+ * strlen.
+ */
+extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len);
+
+#define strncpy_from_user(to, from, n)					\
+({									\
+	const char __user * __sfu_from = (from);			\
+	long __sfu_ret = -EFAULT;					\
+	if (__access_ok(__sfu_from, 0, get_fs()))			\
+		__sfu_ret = __strncpy_from_user((to), __sfu_from, (n));	\
+	__sfu_ret;							\
+})
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+extern unsigned long __strlen_user (const char __user *);
+
+#define strlen_user(str)				\
+({							\
+	const char __user *__su_str = (str);		\
+	unsigned long __su_ret = 0;			\
+	if (__access_ok(__su_str, 0, get_fs()))		\
+		__su_ret = __strlen_user(__su_str);	\
+	__su_ret;					\
+})
+
+/*
+ * Returns: 0 if exception before NUL or reaching the supplied limit
+ * (N), a value greater than N if the limit would be exceeded, else
+ * strlen.
+ */
+extern unsigned long __strnlen_user (const char __user *, long);
+
+#define strnlen_user(str, len)					\
+({								\
+	const char __user *__su_str = (str);			\
+	unsigned long __su_ret = 0;				\
+	if (__access_ok(__su_str, 0, get_fs()))			\
+		__su_ret = __strnlen_user(__su_str, len);	\
+	__su_ret;						\
+})
+
+/* Generic code can't deal with the location-relative format that we use for compactness.  */
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
+struct exception_table_entry {
+	int addr;	/* location-relative address of insn this fixup is for */
+	int cont;	/* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
+};
+
+extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e);
+extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
+
+static inline int
+ia64_done_with_exception (struct pt_regs *regs)
+{
+	const struct exception_table_entry *e;
+	e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri);
+	if (e) {
+		ia64_handle_exception(regs, e);
+		return 1;
+	}
+	return 0;
+}
+
+#define ARCH_HAS_TRANSLATE_MEM_PTR	1
+static __inline__ char *
+xlate_dev_mem_ptr (unsigned long p)
+{
+	struct page *page;
+	char * ptr;
+
+	page = pfn_to_page(p >> PAGE_SHIFT);
+	if (PageUncached(page))
+		ptr = (char *)p + __IA64_UNCACHED_OFFSET;
+	else
+		ptr = __va(p);
+
+	return ptr;
+}
+
+/*
+ * Convert a virtual cached kernel memory pointer to an uncached pointer
+ */
+static __inline__ char *
+xlate_dev_kmem_ptr (char * p)
+{
+	struct page *page;
+	char * ptr;
+
+	page = virt_to_page((unsigned long)p);
+	if (PageUncached(page))
+		ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET;
+	else
+		ptr = p;
+
+	return ptr;
+}
+
+#endif /* _ASM_IA64_UACCESS_H */
diff --git a/arch/ia64/include/asm/ucontext.h b/arch/ia64/include/asm/ucontext.h
new file mode 100644
index 00000000000..bf573dc8ca6
--- /dev/null
+++ b/arch/ia64/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_UCONTEXT_H
+#define _ASM_IA64_UCONTEXT_H
+
+struct ucontext {
+	struct sigcontext uc_mcontext;
+};
+
+#define uc_link		uc_mcontext.sc_gr[0]	/* wrong type; nobody cares */
+#define uc_sigmask	uc_mcontext.sc_sigmask
+#define uc_stack	uc_mcontext.sc_stack
+
+#endif /* _ASM_IA64_UCONTEXT_H */
diff --git a/arch/ia64/include/asm/unaligned.h b/arch/ia64/include/asm/unaligned.h
new file mode 100644
index 00000000000..7bddc7f5858
--- /dev/null
+++ b/arch/ia64/include/asm/unaligned.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_IA64_UNALIGNED_H
+#define _ASM_IA64_UNALIGNED_H
+
+#include <linux/unaligned/le_struct.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+
+#endif /* _ASM_IA64_UNALIGNED_H */
diff --git a/arch/ia64/include/asm/uncached.h b/arch/ia64/include/asm/uncached.h
new file mode 100644
index 00000000000..13d7e65ca3c
--- /dev/null
+++ b/arch/ia64/include/asm/uncached.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Prototypes for the uncached page allocator
+ */
+
+extern unsigned long uncached_alloc_page(int starting_nid, int n_pages);
+extern void uncached_free_page(unsigned long uc_addr, int n_pages);
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
new file mode 100644
index 00000000000..d535833aab5
--- /dev/null
+++ b/arch/ia64/include/asm/unistd.h
@@ -0,0 +1,384 @@
+#ifndef _ASM_IA64_UNISTD_H
+#define _ASM_IA64_UNISTD_H
+
+/*
+ * IA-64 Linux syscall numbers and inline-functions.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/break.h>
+
+#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
+
+#define __NR_ni_syscall			1024
+#define __NR_exit			1025
+#define __NR_read			1026
+#define __NR_write			1027
+#define __NR_open			1028
+#define __NR_close			1029
+#define __NR_creat			1030
+#define __NR_link			1031
+#define __NR_unlink			1032
+#define __NR_execve			1033
+#define __NR_chdir			1034
+#define __NR_fchdir			1035
+#define __NR_utimes			1036
+#define __NR_mknod			1037
+#define __NR_chmod			1038
+#define __NR_chown			1039
+#define __NR_lseek			1040
+#define __NR_getpid			1041
+#define __NR_getppid			1042
+#define __NR_mount			1043
+#define __NR_umount			1044
+#define __NR_setuid			1045
+#define __NR_getuid			1046
+#define __NR_geteuid			1047
+#define __NR_ptrace			1048
+#define __NR_access			1049
+#define __NR_sync			1050
+#define __NR_fsync			1051
+#define __NR_fdatasync			1052
+#define __NR_kill			1053
+#define __NR_rename			1054
+#define __NR_mkdir			1055
+#define __NR_rmdir			1056
+#define __NR_dup			1057
+#define __NR_pipe			1058
+#define __NR_times			1059
+#define __NR_brk			1060
+#define __NR_setgid			1061
+#define __NR_getgid			1062
+#define __NR_getegid			1063
+#define __NR_acct			1064
+#define __NR_ioctl			1065
+#define __NR_fcntl			1066
+#define __NR_umask			1067
+#define __NR_chroot			1068
+#define __NR_ustat			1069
+#define __NR_dup2			1070
+#define __NR_setreuid			1071
+#define __NR_setregid			1072
+#define __NR_getresuid			1073
+#define __NR_setresuid			1074
+#define __NR_getresgid			1075
+#define __NR_setresgid			1076
+#define __NR_getgroups			1077
+#define __NR_setgroups			1078
+#define __NR_getpgid			1079
+#define __NR_setpgid			1080
+#define __NR_setsid			1081
+#define __NR_getsid			1082
+#define __NR_sethostname		1083
+#define __NR_setrlimit			1084
+#define __NR_getrlimit			1085
+#define __NR_getrusage			1086
+#define __NR_gettimeofday		1087
+#define __NR_settimeofday		1088
+#define __NR_select			1089
+#define __NR_poll			1090
+#define __NR_symlink			1091
+#define __NR_readlink			1092
+#define __NR_uselib			1093
+#define __NR_swapon			1094
+#define __NR_swapoff			1095
+#define __NR_reboot			1096
+#define __NR_truncate			1097
+#define __NR_ftruncate			1098
+#define __NR_fchmod			1099
+#define __NR_fchown			1100
+#define __NR_getpriority		1101
+#define __NR_setpriority		1102
+#define __NR_statfs			1103
+#define __NR_fstatfs			1104
+#define __NR_gettid			1105
+#define __NR_semget			1106
+#define __NR_semop			1107
+#define __NR_semctl			1108
+#define __NR_msgget			1109
+#define __NR_msgsnd			1110
+#define __NR_msgrcv			1111
+#define __NR_msgctl			1112
+#define __NR_shmget			1113
+#define __NR_shmat			1114
+#define __NR_shmdt			1115
+#define __NR_shmctl			1116
+/* also known as klogctl() in GNU libc: */
+#define __NR_syslog			1117
+#define __NR_setitimer			1118
+#define __NR_getitimer			1119
+/* 1120 was __NR_old_stat */
+/* 1121 was __NR_old_lstat */
+/* 1122 was __NR_old_fstat */
+#define __NR_vhangup			1123
+#define __NR_lchown			1124
+#define __NR_remap_file_pages		1125
+#define __NR_wait4			1126
+#define __NR_sysinfo			1127
+#define __NR_clone			1128
+#define __NR_setdomainname		1129
+#define __NR_uname			1130
+#define __NR_adjtimex			1131
+/* 1132 was __NR_create_module */
+#define __NR_init_module		1133
+#define __NR_delete_module		1134
+/* 1135 was __NR_get_kernel_syms */
+/* 1136 was __NR_query_module */
+#define __NR_quotactl			1137
+#define __NR_bdflush			1138
+#define __NR_sysfs			1139
+#define __NR_personality		1140
+#define __NR_afs_syscall		1141
+#define __NR_setfsuid			1142
+#define __NR_setfsgid			1143
+#define __NR_getdents			1144
+#define __NR_flock			1145
+#define __NR_readv			1146
+#define __NR_writev			1147
+#define __NR_pread64			1148
+#define __NR_pwrite64			1149
+#define __NR__sysctl			1150
+#define __NR_mmap			1151
+#define __NR_munmap			1152
+#define __NR_mlock			1153
+#define __NR_mlockall			1154
+#define __NR_mprotect			1155
+#define __NR_mremap			1156
+#define __NR_msync			1157
+#define __NR_munlock			1158
+#define __NR_munlockall			1159
+#define __NR_sched_getparam		1160
+#define __NR_sched_setparam		1161
+#define __NR_sched_getscheduler		1162
+#define __NR_sched_setscheduler		1163
+#define __NR_sched_yield		1164
+#define __NR_sched_get_priority_max	1165
+#define __NR_sched_get_priority_min	1166
+#define __NR_sched_rr_get_interval	1167
+#define __NR_nanosleep			1168
+#define __NR_nfsservctl			1169
+#define __NR_prctl			1170
+/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
+#define __NR_mmap2			1172
+#define __NR_pciconfig_read		1173
+#define __NR_pciconfig_write		1174
+#define __NR_perfmonctl			1175
+#define __NR_sigaltstack		1176
+#define __NR_rt_sigaction		1177
+#define __NR_rt_sigpending		1178
+#define __NR_rt_sigprocmask		1179
+#define __NR_rt_sigqueueinfo		1180
+#define __NR_rt_sigreturn		1181
+#define __NR_rt_sigsuspend		1182
+#define __NR_rt_sigtimedwait		1183
+#define __NR_getcwd			1184
+#define __NR_capget			1185
+#define __NR_capset			1186
+#define __NR_sendfile			1187
+#define __NR_getpmsg			1188
+#define __NR_putpmsg			1189
+#define __NR_socket			1190
+#define __NR_bind			1191
+#define __NR_connect			1192
+#define __NR_listen			1193
+#define __NR_accept			1194
+#define __NR_getsockname		1195
+#define __NR_getpeername		1196
+#define __NR_socketpair			1197
+#define __NR_send			1198
+#define __NR_sendto			1199
+#define __NR_recv			1200
+#define __NR_recvfrom			1201
+#define __NR_shutdown			1202
+#define __NR_setsockopt			1203
+#define __NR_getsockopt			1204
+#define __NR_sendmsg			1205
+#define __NR_recvmsg			1206
+#define __NR_pivot_root			1207
+#define __NR_mincore			1208
+#define __NR_madvise			1209
+#define __NR_stat			1210
+#define __NR_lstat			1211
+#define __NR_fstat			1212
+#define __NR_clone2			1213
+#define __NR_getdents64			1214
+#define __NR_getunwind			1215
+#define __NR_readahead			1216
+#define __NR_setxattr			1217
+#define __NR_lsetxattr			1218
+#define __NR_fsetxattr			1219
+#define __NR_getxattr			1220
+#define __NR_lgetxattr			1221
+#define __NR_fgetxattr			1222
+#define __NR_listxattr			1223
+#define __NR_llistxattr			1224
+#define __NR_flistxattr			1225
+#define __NR_removexattr		1226
+#define __NR_lremovexattr		1227
+#define __NR_fremovexattr		1228
+#define __NR_tkill			1229
+#define __NR_futex			1230
+#define __NR_sched_setaffinity		1231
+#define __NR_sched_getaffinity		1232
+#define __NR_set_tid_address		1233
+#define __NR_fadvise64			1234
+#define __NR_tgkill			1235
+#define __NR_exit_group			1236
+#define __NR_lookup_dcookie		1237
+#define __NR_io_setup			1238
+#define __NR_io_destroy			1239
+#define __NR_io_getevents		1240
+#define __NR_io_submit			1241
+#define __NR_io_cancel			1242
+#define __NR_epoll_create		1243
+#define __NR_epoll_ctl			1244
+#define __NR_epoll_wait			1245
+#define __NR_restart_syscall		1246
+#define __NR_semtimedop			1247
+#define __NR_timer_create		1248
+#define __NR_timer_settime		1249
+#define __NR_timer_gettime		1250
+#define __NR_timer_getoverrun		1251
+#define __NR_timer_delete		1252
+#define __NR_clock_settime		1253
+#define __NR_clock_gettime		1254
+#define __NR_clock_getres		1255
+#define __NR_clock_nanosleep		1256
+#define __NR_fstatfs64			1257
+#define __NR_statfs64			1258
+#define __NR_mbind			1259
+#define __NR_get_mempolicy		1260
+#define __NR_set_mempolicy		1261
+#define __NR_mq_open			1262
+#define __NR_mq_unlink			1263
+#define __NR_mq_timedsend		1264
+#define __NR_mq_timedreceive		1265
+#define __NR_mq_notify			1266
+#define __NR_mq_getsetattr		1267
+#define __NR_kexec_load			1268
+#define __NR_vserver			1269
+#define __NR_waitid			1270
+#define __NR_add_key			1271
+#define __NR_request_key		1272
+#define __NR_keyctl			1273
+#define __NR_ioprio_set			1274
+#define __NR_ioprio_get			1275
+#define __NR_move_pages			1276
+#define __NR_inotify_init		1277
+#define __NR_inotify_add_watch		1278
+#define __NR_inotify_rm_watch		1279
+#define __NR_migrate_pages		1280
+#define __NR_openat			1281
+#define __NR_mkdirat			1282
+#define __NR_mknodat			1283
+#define __NR_fchownat			1284
+#define __NR_futimesat			1285
+#define __NR_newfstatat			1286
+#define __NR_unlinkat			1287
+#define __NR_renameat			1288
+#define __NR_linkat			1289
+#define __NR_symlinkat			1290
+#define __NR_readlinkat			1291
+#define __NR_fchmodat			1292
+#define __NR_faccessat			1293
+#define __NR_pselect6			1294
+#define __NR_ppoll			1295
+#define __NR_unshare			1296
+#define __NR_splice			1297
+#define __NR_set_robust_list		1298
+#define __NR_get_robust_list		1299
+#define __NR_sync_file_range		1300
+#define __NR_tee			1301
+#define __NR_vmsplice			1302
+#define __NR_fallocate			1303
+#define __NR_getcpu			1304
+#define __NR_epoll_pwait		1305
+#define __NR_utimensat			1306
+#define __NR_signalfd			1307
+#define __NR_timerfd			1308
+#define __NR_eventfd			1309
+#define __NR_timerfd_create		1310
+#define __NR_timerfd_settime		1311
+#define __NR_timerfd_gettime		1312
+#define __NR_signalfd4			1313
+#define __NR_eventfd2			1314
+#define __NR_epoll_create1		1315
+#define __NR_dup3			1316
+#define __NR_pipe2			1317
+#define __NR_inotify_init1		1318
+
+#ifdef __KERNEL__
+
+
+#define NR_syscalls			295 /* length of syscall table */
+
+/*
+ * The following defines stop scripts/checksyscalls.sh from complaining about
+ * unimplemented system calls.  Glibc provides for each of these by using
+ * more modern equivalent system calls.
+ */
+#define __IGNORE_fork		/* clone() */
+#define __IGNORE_time		/* gettimeofday() */
+#define __IGNORE_alarm		/* setitimer(ITIMER_REAL, ... */
+#define __IGNORE_pause		/* rt_sigprocmask(), rt_sigsuspend() */
+#define __IGNORE_utime		/* utimes() */
+#define __IGNORE_getpgrp	/* getpgid() */
+#define __IGNORE_vfork		/* clone() */
+
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+#ifdef CONFIG_IA32_SUPPORT
+# define __ARCH_WANT_SYS_FADVISE64
+# define __ARCH_WANT_SYS_GETPGRP
+# define __ARCH_WANT_SYS_LLSEEK
+# define __ARCH_WANT_SYS_NICE
+# define __ARCH_WANT_SYS_OLD_GETRLIMIT
+# define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_SIGPENDING
+# define __ARCH_WANT_SYS_SIGPROCMASK
+# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+# define __ARCH_WANT_COMPAT_SYS_TIME
+#endif
+
+#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+
+extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr);
+
+asmlinkage unsigned long sys_mmap(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long off);
+asmlinkage unsigned long sys_mmap2(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long pgoff);
+struct pt_regs;
+struct sigaction;
+long sys_execve(char __user *filename, char __user * __user *argv,
+			   char __user * __user *envp, struct pt_regs *regs);
+asmlinkage long sys_pipe(void);
+asmlinkage long sys_rt_sigaction(int sig,
+				 const struct sigaction __user *act,
+				 struct sigaction __user *oact,
+				 size_t sigsetsize);
+
+/*
+ * "Conditional" syscalls
+ *
+ * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in
+ * kernel/sys_ni.c.  This version causes warnings because the declaration isn't a
+ * proper prototype, but we can't use __typeof__ either, because not all cond_syscall()
+ * declarations have prototypes at the moment.
+ */
+#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_IA64_UNISTD_H */
diff --git a/arch/ia64/include/asm/unwind.h b/arch/ia64/include/asm/unwind.h
new file mode 100644
index 00000000000..1af3875f1a5
--- /dev/null
+++ b/arch/ia64/include/asm/unwind.h
@@ -0,0 +1,233 @@
+#ifndef _ASM_IA64_UNWIND_H
+#define _ASM_IA64_UNWIND_H
+
+/*
+ * Copyright (C) 1999-2000, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * A simple API for unwinding kernel stacks.  This is used for
+ * debugging and error reporting purposes.  The kernel doesn't need
+ * full-blown stack unwinding with all the bells and whitles, so there
+ * is not much point in implementing the full IA-64 unwind API (though
+ * it would of course be possible to implement the kernel API on top
+ * of it).
+ */
+
+struct task_struct;	/* forward declaration */
+struct switch_stack;	/* forward declaration */
+
+enum unw_application_register {
+	UNW_AR_BSP,
+	UNW_AR_BSPSTORE,
+	UNW_AR_PFS,
+	UNW_AR_RNAT,
+	UNW_AR_UNAT,
+	UNW_AR_LC,
+	UNW_AR_EC,
+	UNW_AR_FPSR,
+	UNW_AR_RSC,
+	UNW_AR_CCV,
+	UNW_AR_CSD,
+	UNW_AR_SSD
+};
+
+/*
+ * The following declarations are private to the unwind
+ * implementation:
+ */
+
+struct unw_stack {
+	unsigned long limit;
+	unsigned long top;
+};
+
+#define UNW_FLAG_INTERRUPT_FRAME	(1UL << 0)
+
+/*
+ * No user of this module should every access this structure directly
+ * as it is subject to change.  It is declared here solely so we can
+ * use automatic variables.
+ */
+struct unw_frame_info {
+	struct unw_stack regstk;
+	struct unw_stack memstk;
+	unsigned int flags;
+	short hint;
+	short prev_script;
+
+	/* current frame info: */
+	unsigned long bsp;		/* backing store pointer value */
+	unsigned long sp;		/* stack pointer value */
+	unsigned long psp;		/* previous sp value */
+	unsigned long ip;		/* instruction pointer value */
+	unsigned long pr;		/* current predicate values */
+	unsigned long *cfm_loc;		/* cfm save location (or NULL) */
+	unsigned long pt;		/* struct pt_regs location */
+
+	struct task_struct *task;
+	struct switch_stack *sw;
+
+	/* preserved state: */
+	unsigned long *bsp_loc;		/* previous bsp save location */
+	unsigned long *bspstore_loc;
+	unsigned long *pfs_loc;
+	unsigned long *rnat_loc;
+	unsigned long *rp_loc;
+	unsigned long *pri_unat_loc;
+	unsigned long *unat_loc;
+	unsigned long *pr_loc;
+	unsigned long *lc_loc;
+	unsigned long *fpsr_loc;
+	struct unw_ireg {
+		unsigned long *loc;
+		struct unw_ireg_nat {
+			unsigned long type : 3;		/* enum unw_nat_type */
+			signed long off : 61;		/* NaT word is at loc+nat.off */
+		} nat;
+	} r4, r5, r6, r7;
+	unsigned long *b1_loc, *b2_loc, *b3_loc, *b4_loc, *b5_loc;
+	struct ia64_fpreg *f2_loc, *f3_loc, *f4_loc, *f5_loc, *fr_loc[16];
+};
+
+/*
+ * The official API follows below:
+ */
+
+struct unw_table_entry {
+	u64 start_offset;
+	u64 end_offset;
+	u64 info_offset;
+};
+
+/*
+ * Initialize unwind support.
+ */
+extern void unw_init (void);
+
+extern void *unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned long gp,
+				   const void *table_start, const void *table_end);
+
+extern void unw_remove_unwind_table (void *handle);
+
+/*
+ * Prepare to unwind blocked task t.
+ */
+extern void unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t);
+
+extern void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t,
+				 struct switch_stack *sw);
+
+/*
+ * Prepare to unwind the currently running thread.
+ */
+extern void unw_init_running (void (*callback)(struct unw_frame_info *info, void *arg), void *arg);
+
+/*
+ * Unwind to previous to frame.  Returns 0 if successful, negative
+ * number in case of an error.
+ */
+extern int unw_unwind (struct unw_frame_info *info);
+
+/*
+ * Unwind until the return pointer is in user-land (or until an error
+ * occurs).  Returns 0 if successful, negative number in case of
+ * error.
+ */
+extern int unw_unwind_to_user (struct unw_frame_info *info);
+
+#define unw_is_intr_frame(info)	(((info)->flags & UNW_FLAG_INTERRUPT_FRAME) != 0)
+
+static inline int
+unw_get_ip (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->ip;
+	return 0;
+}
+
+static inline int
+unw_get_sp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->sp;
+	return 0;
+}
+
+static inline int
+unw_get_psp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->psp;
+	return 0;
+}
+
+static inline int
+unw_get_bsp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->bsp;
+	return 0;
+}
+
+static inline int
+unw_get_cfm (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = *(info)->cfm_loc;
+	return 0;
+}
+
+static inline int
+unw_set_cfm (struct unw_frame_info *info, unsigned long val)
+{
+	*(info)->cfm_loc = val;
+	return 0;
+}
+
+static inline int
+unw_get_rp (struct unw_frame_info *info, unsigned long *val)
+{
+	if (!info->rp_loc)
+		return -1;
+	*val = *info->rp_loc;
+	return 0;
+}
+
+extern int unw_access_gr (struct unw_frame_info *, int, unsigned long *, char *, int);
+extern int unw_access_br (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_fr (struct unw_frame_info *, int, struct ia64_fpreg *, int);
+extern int unw_access_ar (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_pr (struct unw_frame_info *, unsigned long *, int);
+
+static inline int
+unw_set_gr (struct unw_frame_info *i, int n, unsigned long v, char nat)
+{
+	return unw_access_gr(i, n, &v, &nat, 1);
+}
+
+static inline int
+unw_set_br (struct unw_frame_info *i, int n, unsigned long v)
+{
+	return unw_access_br(i, n, &v, 1);
+}
+
+static inline int
+unw_set_fr (struct unw_frame_info *i, int n, struct ia64_fpreg v)
+{
+	return unw_access_fr(i, n, &v, 1);
+}
+
+static inline int
+unw_set_ar (struct unw_frame_info *i, int n, unsigned long v)
+{
+	return unw_access_ar(i, n, &v, 1);
+}
+
+static inline int
+unw_set_pr (struct unw_frame_info *i, unsigned long v)
+{
+	return unw_access_pr(i, &v, 1);
+}
+
+#define unw_get_gr(i,n,v,nat)	unw_access_gr(i,n,v,nat,0)
+#define unw_get_br(i,n,v)	unw_access_br(i,n,v,0)
+#define unw_get_fr(i,n,v)	unw_access_fr(i,n,v,0)
+#define unw_get_ar(i,n,v)	unw_access_ar(i,n,v,0)
+#define unw_get_pr(i,v)		unw_access_pr(i,v,0)
+
+#endif /* _ASM_UNWIND_H */
diff --git a/arch/ia64/include/asm/user.h b/arch/ia64/include/asm/user.h
new file mode 100644
index 00000000000..8b982111034
--- /dev/null
+++ b/arch/ia64/include/asm/user.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_IA64_USER_H
+#define _ASM_IA64_USER_H
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as
+ * follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ *
+ * Modified 1998, 1999, 2001
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <linux/ptrace.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+
+#define EF_SIZE		3072	/* XXX fix me */
+
+struct user {
+	unsigned long	regs[EF_SIZE/8+32];	/* integer and fp regs */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_IA64_USER_H */
diff --git a/arch/ia64/include/asm/ustack.h b/arch/ia64/include/asm/ustack.h
new file mode 100644
index 00000000000..504167c35b8
--- /dev/null
+++ b/arch/ia64/include/asm/ustack.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_IA64_USTACK_H
+#define _ASM_IA64_USTACK_H
+
+/*
+ * Constants for the user stack size
+ */
+
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */
+#define MAX_USER_STACK_SIZE	(RGN_MAP_LIMIT/2)
+#define STACK_TOP		(0x6000000000000000UL + RGN_MAP_LIMIT)
+#define STACK_TOP_MAX		STACK_TOP
+#endif
+
+/* Make a default stack size of 2GiB */
+#define DEFAULT_USER_STACK_SIZE	(1UL << 31)
+
+#endif /* _ASM_IA64_USTACK_H */
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
new file mode 100644
index 00000000000..f607018af4a
--- /dev/null
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -0,0 +1,309 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV architectural definitions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_IA64_UV_HUB_H__
+#define __ASM_IA64_UV_HUB_H__
+
+#include <linux/numa.h>
+#include <linux/percpu.h>
+#include <asm/types.h>
+#include <asm/percpu.h>
+
+
+/*
+ * Addressing Terminology
+ *
+ *	M       - The low M bits of a physical address represent the offset
+ *		  into the blade local memory. RAM memory on a blade is physically
+ *		  contiguous (although various IO spaces may punch holes in
+ *		  it)..
+ *
+ * 	N	- Number of bits in the node portion of a socket physical
+ * 		  address.
+ *
+ * 	NASID   - network ID of a router, Mbrick or Cbrick. Nasid values of
+ * 	 	  routers always have low bit of 1, C/MBricks have low bit
+ * 		  equal to 0. Most addressing macros that target UV hub chips
+ * 		  right shift the NASID by 1 to exclude the always-zero bit.
+ * 		  NASIDs contain up to 15 bits.
+ *
+ *	GNODE   - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
+ *		  of nasids.
+ *
+ * 	PNODE   - the low N bits of the GNODE. The PNODE is the most useful variant
+ * 		  of the nasid for socket usage.
+ *
+ *
+ *  NumaLink Global Physical Address Format:
+ *  +--------------------------------+---------------------+
+ *  |00..000|      GNODE             |      NodeOffset     |
+ *  +--------------------------------+---------------------+
+ *          |<-------53 - M bits --->|<--------M bits ----->
+ *
+ *	M - number of node offset bits (35 .. 40)
+ *
+ *
+ *  Memory/UV-HUB Processor Socket Address Format:
+ *  +----------------+---------------+---------------------+
+ *  |00..000000000000|   PNODE       |      NodeOffset     |
+ *  +----------------+---------------+---------------------+
+ *                   <--- N bits --->|<--------M bits ----->
+ *
+ *	M - number of node offset bits (35 .. 40)
+ *	N - number of PNODE bits (0 .. 10)
+ *
+ *		Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
+ *		The actual values are configuration dependent and are set at
+ *		boot time. M & N values are set by the hardware/BIOS at boot.
+ */
+
+
+/*
+ * Maximum number of bricks in all partitions and in all coherency domains.
+ * This is the total number of bricks accessible in the numalink fabric. It
+ * includes all C & M bricks. Routers are NOT included.
+ *
+ * This value is also the value of the maximum number of non-router NASIDs
+ * in the numalink fabric.
+ *
+ * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
+ */
+#define UV_MAX_NUMALINK_BLADES	16384
+
+/*
+ * Maximum number of C/Mbricks within a software SSI (hardware may support
+ * more).
+ */
+#define UV_MAX_SSI_BLADES	1
+
+/*
+ * The largest possible NASID of a C or M brick (+ 2)
+ */
+#define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_NODES * 2)
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced and are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct uv_hub_info_s {
+	unsigned long	global_mmr_base;
+	unsigned long	gpa_mask;
+	unsigned long	gnode_upper;
+	unsigned long	lowmem_remap_top;
+	unsigned long	lowmem_remap_base;
+	unsigned short	pnode;
+	unsigned short	pnode_mask;
+	unsigned short	coherency_domain_number;
+	unsigned short	numa_blade_id;
+	unsigned char	blade_processor_id;
+	unsigned char	m_val;
+	unsigned char	n_val;
+};
+DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+#define uv_hub_info 		(&__get_cpu_var(__uv_hub_info))
+#define uv_cpu_hub_info(cpu)	(&per_cpu(__uv_hub_info, cpu))
+
+/*
+ * Local & Global MMR space macros.
+ * 	Note: macros are intended to be used ONLY by inline functions
+ * 	in this file - not by other kernel code.
+ * 		n -  NASID (full 15-bit global nasid)
+ * 		g -  GNODE (full 15-bit global nasid, right shifted 1)
+ * 		p -  PNODE (local part of nsids, right shifted 1)
+ */
+#define UV_NASID_TO_PNODE(n)		(((n) >> 1) & uv_hub_info->pnode_mask)
+#define UV_PNODE_TO_NASID(p)		(((p) << 1) | uv_hub_info->gnode_upper)
+
+#define UV_LOCAL_MMR_BASE		0xf4000000UL
+#define UV_GLOBAL_MMR32_BASE		0xf8000000UL
+#define UV_GLOBAL_MMR64_BASE		(uv_hub_info->global_mmr_base)
+
+#define UV_GLOBAL_MMR32_PNODE_SHIFT	15
+#define UV_GLOBAL_MMR64_PNODE_SHIFT	26
+
+#define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
+
+#define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
+	((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+
+/*
+ * Macros for converting between kernel virtual addresses, socket local physical
+ * addresses, and UV global physical addresses.
+ * 	Note: use the standard __pa() & __va() macros for converting
+ * 	      between socket virtual and socket physical addresses.
+ */
+
+/* socket phys RAM --> UV global physical address */
+static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
+{
+	if (paddr < uv_hub_info->lowmem_remap_top)
+		paddr += uv_hub_info->lowmem_remap_base;
+	return paddr | uv_hub_info->gnode_upper;
+}
+
+
+/* socket virtual --> UV global physical address */
+static inline unsigned long uv_gpa(void *v)
+{
+	return __pa(v) | uv_hub_info->gnode_upper;
+}
+
+/* socket virtual --> UV global physical address */
+static inline void *uv_vgpa(void *v)
+{
+	return (void *)uv_gpa(v);
+}
+
+/* UV global physical address --> socket virtual */
+static inline void *uv_va(unsigned long gpa)
+{
+	return __va(gpa & uv_hub_info->gpa_mask);
+}
+
+/* pnode, offset --> socket virtual */
+static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
+{
+	return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset);
+}
+
+
+/*
+ * Access global MMRs using the low memory MMR32 space. This region supports
+ * faster MMR access but not all MMRs are accessible in this space.
+ */
+static inline unsigned long *uv_global_mmr32_address(int pnode,
+				unsigned long offset)
+{
+	return __va(UV_GLOBAL_MMR32_BASE |
+		       UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
+				 unsigned long val)
+{
+	*uv_global_mmr32_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr32(int pnode,
+						 unsigned long offset)
+{
+	return *uv_global_mmr32_address(pnode, offset);
+}
+
+/*
+ * Access Global MMR space using the MMR space located at the top of physical
+ * memory.
+ */
+static inline unsigned long *uv_global_mmr64_address(int pnode,
+				unsigned long offset)
+{
+	return __va(UV_GLOBAL_MMR64_BASE |
+		    UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
+				unsigned long val)
+{
+	*uv_global_mmr64_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr64(int pnode,
+						 unsigned long offset)
+{
+	return *uv_global_mmr64_address(pnode, offset);
+}
+
+/*
+ * Access hub local MMRs. Faster than using global space but only local MMRs
+ * are accessible.
+ */
+static inline unsigned long *uv_local_mmr_address(unsigned long offset)
+{
+	return __va(UV_LOCAL_MMR_BASE | offset);
+}
+
+static inline unsigned long uv_read_local_mmr(unsigned long offset)
+{
+	return *uv_local_mmr_address(offset);
+}
+
+static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
+{
+	*uv_local_mmr_address(offset) = val;
+}
+
+/*
+ * Structures and definitions for converting between cpu, node, pnode, and blade
+ * numbers.
+ */
+
+/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
+static inline int uv_blade_processor_id(void)
+{
+	return smp_processor_id();
+}
+
+/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
+static inline int uv_numa_blade_id(void)
+{
+	return 0;
+}
+
+/* Convert a cpu number to the the UV blade number */
+static inline int uv_cpu_to_blade_id(int cpu)
+{
+	return 0;
+}
+
+/* Convert linux node number to the UV blade number */
+static inline int uv_node_to_blade_id(int nid)
+{
+	return 0;
+}
+
+/* Convert a blade id to the PNODE of the blade */
+static inline int uv_blade_to_pnode(int bid)
+{
+	return 0;
+}
+
+/* Determine the number of possible cpus on a blade */
+static inline int uv_blade_nr_possible_cpus(int bid)
+{
+	return num_possible_cpus();
+}
+
+/* Determine the number of online cpus on a blade */
+static inline int uv_blade_nr_online_cpus(int bid)
+{
+	return num_online_cpus();
+}
+
+/* Convert a cpu id to the PNODE of the blade containing the cpu */
+static inline int uv_cpu_to_pnode(int cpu)
+{
+	return 0;
+}
+
+/* Convert a linux node number to the PNODE of the blade */
+static inline int uv_node_to_pnode(int nid)
+{
+	return 0;
+}
+
+/* Maximum possible number of blades */
+static inline int uv_num_possible_blades(void)
+{
+	return 1;
+}
+
+#endif /* __ASM_IA64_UV_HUB__ */
+
diff --git a/arch/ia64/include/asm/uv/uv_mmrs.h b/arch/ia64/include/asm/uv/uv_mmrs.h
new file mode 100644
index 00000000000..c149ef08543
--- /dev/null
+++ b/arch/ia64/include/asm/uv/uv_mmrs.h
@@ -0,0 +1,673 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV MMR definitions
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_IA64_UV_MMRS__
+#define __ASM_IA64_UV_MMRS__
+
+#define UV_MMR_ENABLE		(1UL << 63)
+
+/* ========================================================================= */
+/*                           UVH_BAU_DATA_CONFIG                             */
+/* ========================================================================= */
+#define UVH_BAU_DATA_CONFIG 0x61680UL
+#define UVH_BAU_DATA_CONFIG_32 0x0438
+
+#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0
+#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_BAU_DATA_CONFIG_DM_SHFT 8
+#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11
+#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12
+#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_BAU_DATA_CONFIG_P_SHFT 13
+#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_BAU_DATA_CONFIG_T_SHFT 15
+#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_BAU_DATA_CONFIG_M_SHFT 16
+#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32
+#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_bau_data_config_u {
+    unsigned long	v;
+    struct uvh_bau_data_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_EVENT_OCCURRED0                             */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0 0x70000UL
+#define UVH_EVENT_OCCURRED0_32 0x005e8
+
+#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0
+#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL
+#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3
+#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL
+#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4
+#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL
+#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5
+#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL
+#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6
+#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL
+#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43
+#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
+#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45
+#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51
+#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52
+#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53
+#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54
+#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL
+#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55
+#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL
+union uvh_event_occurred0_u {
+    unsigned long	v;
+    struct uvh_event_occurred0_s {
+	unsigned long	lb_hcerr             :  1;  /* RW, W1C */
+	unsigned long	gr0_hcerr            :  1;  /* RW, W1C */
+	unsigned long	gr1_hcerr            :  1;  /* RW, W1C */
+	unsigned long	lh_hcerr             :  1;  /* RW, W1C */
+	unsigned long	rh_hcerr             :  1;  /* RW, W1C */
+	unsigned long	xn_hcerr             :  1;  /* RW, W1C */
+	unsigned long	si_hcerr             :  1;  /* RW, W1C */
+	unsigned long	lb_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	gr0_aoerr0           :  1;  /* RW, W1C */
+	unsigned long	gr1_aoerr0           :  1;  /* RW, W1C */
+	unsigned long	lh_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	rh_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	xn_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	si_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	lb_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	gr0_aoerr1           :  1;  /* RW, W1C */
+	unsigned long	gr1_aoerr1           :  1;  /* RW, W1C */
+	unsigned long	lh_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	rh_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	xn_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	si_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	rh_vpi_int           :  1;  /* RW, W1C */
+	unsigned long	system_shutdown_int  :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_0         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_1         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_2         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_3         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_4         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_5         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_6         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_7         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_8         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_9         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_10        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_11        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_12        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_13        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_14        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_15        :  1;  /* RW, W1C */
+	unsigned long	l1_nmi_int           :  1;  /* RW, W1C */
+	unsigned long	stop_clock           :  1;  /* RW, W1C */
+	unsigned long	asic_to_l1           :  1;  /* RW, W1C */
+	unsigned long	l1_to_asic           :  1;  /* RW, W1C */
+	unsigned long	ltc_int              :  1;  /* RW, W1C */
+	unsigned long	la_seq_trigger       :  1;  /* RW, W1C */
+	unsigned long	ipi_int              :  1;  /* RW, W1C */
+	unsigned long	extio_int0           :  1;  /* RW, W1C */
+	unsigned long	extio_int1           :  1;  /* RW, W1C */
+	unsigned long	extio_int2           :  1;  /* RW, W1C */
+	unsigned long	extio_int3           :  1;  /* RW, W1C */
+	unsigned long	profile_int          :  1;  /* RW, W1C */
+	unsigned long	rtc0                 :  1;  /* RW, W1C */
+	unsigned long	rtc1                 :  1;  /* RW, W1C */
+	unsigned long	rtc2                 :  1;  /* RW, W1C */
+	unsigned long	rtc3                 :  1;  /* RW, W1C */
+	unsigned long	bau_data             :  1;  /* RW, W1C */
+	unsigned long	power_management_req :  1;  /* RW, W1C */
+	unsigned long	rsvd_57_63           :  7;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                        UVH_EVENT_OCCURRED0_ALIAS                          */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL
+#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPB                                */
+/* ========================================================================= */
+#define UVH_INT_CMPB 0x22080UL
+
+#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
+#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpb_u {
+    unsigned long	v;
+    struct uvh_int_cmpb_s {
+	unsigned long	real_time_cmpb : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPC                                */
+/* ========================================================================= */
+#define UVH_INT_CMPC 0x22100UL
+
+#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpc_u {
+    unsigned long	v;
+    struct uvh_int_cmpc_s {
+	unsigned long	real_time_cmpc : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPD                                */
+/* ========================================================================= */
+#define UVH_INT_CMPD 0x22180UL
+
+#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpd_u {
+    unsigned long	v;
+    struct uvh_int_cmpd_s {
+	unsigned long	real_time_cmpd : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_NODE_ID                                 */
+/* ========================================================================= */
+#define UVH_NODE_ID 0x0UL
+
+#define UVH_NODE_ID_FORCE1_SHFT 0
+#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
+#define UVH_NODE_ID_MANUFACTURER_SHFT 1
+#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
+#define UVH_NODE_ID_PART_NUMBER_SHFT 12
+#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
+#define UVH_NODE_ID_REVISION_SHFT 28
+#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
+#define UVH_NODE_ID_NODE_ID_SHFT 32
+#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
+#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48
+#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
+#define UVH_NODE_ID_NI_PORT_SHFT 56
+#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
+
+union uvh_node_id_u {
+    unsigned long	v;
+    struct uvh_node_id_s {
+	unsigned long	force1        :  1;  /* RO */
+	unsigned long	manufacturer  : 11;  /* RO */
+	unsigned long	part_number   : 16;  /* RO */
+	unsigned long	revision      :  4;  /* RO */
+	unsigned long	node_id       : 15;  /* RW */
+	unsigned long	rsvd_47       :  1;  /*    */
+	unsigned long	nodes_per_bit :  7;  /* RW */
+	unsigned long	rsvd_55       :  1;  /*    */
+	unsigned long	ni_port       :  4;  /* RO */
+	unsigned long	rsvd_60_63    :  4;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_0_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_1_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_2_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_gru_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_gru_overlay_config_mmr_s {
+	unsigned long	rsvd_0_27: 28;  /*    */
+	unsigned long	base   : 18;  /* RW */
+	unsigned long	rsvd_46_47:  2;  /*    */
+	unsigned long	gr4    :  1;  /* RW */
+	unsigned long	rsvd_49_51:  3;  /*    */
+	unsigned long	n_gru  :  4;  /* RW */
+	unsigned long	rsvd_56_62:  7;  /*    */
+	unsigned long	enable :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmr_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_mmr_overlay_config_mmr_s {
+	unsigned long	rsvd_0_25: 26;  /*    */
+	unsigned long	base     : 20;  /* RW */
+	unsigned long	dual_hub :  1;  /* RW */
+	unsigned long	rsvd_47_62: 16;  /*    */
+	unsigned long	enable   :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                                 UVH_RTC                                   */
+/* ========================================================================= */
+#define UVH_RTC 0x340000UL
+
+#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
+#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
+
+union uvh_rtc_u {
+    unsigned long	v;
+    struct uvh_rtc_s {
+	unsigned long	real_time_clock : 56;  /* RW */
+	unsigned long	rsvd_56_63      :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC1_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC1_INT_CONFIG 0x615c0UL
+
+#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC1_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC1_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC1_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC1_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC1_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC1_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC1_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC1_INT_CONFIG_P_SHFT 13
+#define UVH_RTC1_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC1_INT_CONFIG_T_SHFT 15
+#define UVH_RTC1_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC1_INT_CONFIG_M_SHFT 16
+#define UVH_RTC1_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC1_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC1_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc1_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc1_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC2_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC2_INT_CONFIG 0x61600UL
+
+#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC2_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC2_INT_CONFIG_P_SHFT 13
+#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC2_INT_CONFIG_T_SHFT 15
+#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC2_INT_CONFIG_M_SHFT 16
+#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc2_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc2_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC3_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC3_INT_CONFIG 0x61640UL
+
+#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC3_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC3_INT_CONFIG_P_SHFT 13
+#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC3_INT_CONFIG_T_SHFT 15
+#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC3_INT_CONFIG_M_SHFT 16
+#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc3_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc3_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                            UVH_RTC_INC_RATIO                              */
+/* ========================================================================= */
+#define UVH_RTC_INC_RATIO 0x350000UL
+
+#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0
+#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL
+#define UVH_RTC_INC_RATIO_RATIO_SHFT 20
+#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL
+
+union uvh_rtc_inc_ratio_u {
+    unsigned long	v;
+    struct uvh_rtc_inc_ratio_s {
+	unsigned long	fraction : 20;  /* RW */
+	unsigned long	ratio    :  3;  /* RW */
+	unsigned long	rsvd_23_63: 41;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_SI_ADDR_MAP_CONFIG                           */
+/* ========================================================================= */
+#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
+
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
+
+union uvh_si_addr_map_config_u {
+    unsigned long	v;
+    struct uvh_si_addr_map_config_s {
+	unsigned long	m_skt :  6;  /* RW */
+	unsigned long	rsvd_6_7:  2;  /*    */
+	unsigned long	n_skt :  4;  /* RW */
+	unsigned long	rsvd_12_63: 52;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
+
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias0_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias0_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
+
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias1_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias1_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
+
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias2_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias2_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+
+#endif /* __ASM_IA64_UV_MMRS__ */
diff --git a/arch/ia64/include/asm/vga.h b/arch/ia64/include/asm/vga.h
new file mode 100644
index 00000000000..02184ecd820
--- /dev/null
+++ b/arch/ia64/include/asm/vga.h
@@ -0,0 +1,25 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ *	(c) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ *	(c) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#ifndef __ASM_IA64_VGA_H_
+#define __ASM_IA64_VGA_H_
+
+/*
+ * On the PC, we can just recalculate addresses and then access the
+ * videoram directly without any black magic.
+ */
+
+extern unsigned long vga_console_iobase;
+extern unsigned long vga_console_membase;
+
+#define VGA_MAP_MEM(x,s)	((unsigned long) ioremap_nocache(vga_console_membase + (x), s))
+
+#define vga_readb(x)	(*(x))
+#define vga_writeb(x,y)	(*(y) = (x))
+
+#endif /* __ASM_IA64_VGA_H_ */
diff --git a/arch/ia64/include/asm/xor.h b/arch/ia64/include/asm/xor.h
new file mode 100644
index 00000000000..a349e23dea1
--- /dev/null
+++ b/arch/ia64/include/asm/xor.h
@@ -0,0 +1,31 @@
+/*
+ * Optimized RAID-5 checksumming functions for IA-64.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *);
+extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *);
+extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_ia64 = {
+	.name =	"ia64",
+	.do_2 =	xor_ia64_2,
+	.do_3 =	xor_ia64_3,
+	.do_4 =	xor_ia64_4,
+	.do_5 =	xor_ia64_5,
+};
+
+#define XOR_TRY_TEMPLATES	xor_speed(&xor_block_ia64)
diff --git a/arch/ia64/kernel/.gitignore b/arch/ia64/kernel/.gitignore
index 98307759a3b..21cb0da5ded 100644
--- a/arch/ia64/kernel/.gitignore
+++ b/arch/ia64/kernel/.gitignore
@@ -1 +1,2 @@
 gate.lds
+vmlinux.lds
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 13fd10e8699..87fea11aecb 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -36,6 +36,8 @@ obj-$(CONFIG_PCI_MSI)		+= msi_ia64.o
 mca_recovery-y			+= mca_drv.o mca_drv_asm.o
 obj-$(CONFIG_IA64_MC_ERR_INJECT)+= err_inject.o
 
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirtentry.o
+
 obj-$(CONFIG_IA64_ESI)		+= esi.o
 ifneq ($(CONFIG_IA64_ESI),)
 obj-y				+= esi_stub.o	# must be in kernel proper
@@ -70,3 +72,45 @@ $(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
 # We must build gate.so before we can assemble it.
 # Note: kbuild does not track this dependency due to usage of .incbin
 $(obj)/gate-data.o: $(obj)/gate.so
+
+# Calculate NR_IRQ = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, ...) based on config
+define sed-y
+	"/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"
+endef
+quiet_cmd_nr_irqs = GEN     $@
+define cmd_nr_irqs
+	(set -e; \
+	 echo "#ifndef __ASM_NR_IRQS_H__"; \
+	 echo "#define __ASM_NR_IRQS_H__"; \
+	 echo "/*"; \
+	 echo " * DO NOT MODIFY."; \
+	 echo " *"; \
+	 echo " * This file was generated by Kbuild"; \
+	 echo " *"; \
+	 echo " */"; \
+	 echo ""; \
+	 sed -ne $(sed-y) $<; \
+	 echo ""; \
+	 echo "#endif" ) > $@
+endef
+
+# We use internal kbuild rules to avoid the "is up to date" message from make
+arch/$(SRCARCH)/kernel/nr-irqs.s: $(srctree)/arch/$(SRCARCH)/kernel/nr-irqs.c \
+				$(wildcard $(srctree)/include/asm-ia64/*/irq.h)
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,cc_s_c)
+
+include/asm-ia64/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s
+	$(Q)mkdir -p $(dir $@)
+	$(call cmd,nr_irqs)
+
+clean-files += $(objtree)/include/asm-ia64/nr-irqs.h
+
+#
+# native ivt.S and entry.S
+#
+ASM_PARAVIRT_OBJS = ivt.o entry.o
+define paravirtualized_native
+AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE
+endef
+$(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj))))
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 43687cc60df..5d1eb7ee2bf 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -774,7 +774,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 static
-int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid)
+int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	int pxm_id;
@@ -854,8 +854,7 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	union acpi_object *obj;
 	struct acpi_madt_local_sapic *lsapic;
 	cpumask_t tmp_map;
-	long physid;
-	int cpu;
+	int cpu, physid;
 
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
 		return -EINVAL;
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index c64a55af9b9..94c44b1ccfd 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -10,11 +10,11 @@
 #include <linux/pid.h>
 #include <linux/clocksource.h>
 #include <linux/kbuild.h>
-#include <asm-ia64/processor.h>
-#include <asm-ia64/ptrace.h>
-#include <asm-ia64/siginfo.h>
-#include <asm-ia64/sigcontext.h>
-#include <asm-ia64/mca.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/siginfo.h>
+#include <asm/sigcontext.h>
+#include <asm/mca.h>
 
 #include "../kernel/sigframe.h"
 #include "../kernel/fsyscall_gtod_data.h"
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index b8498ea6206..7b435451b3d 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -51,7 +51,7 @@ processor_set_pstate (
 	retval = ia64_pal_set_pstate((u64)value);
 
 	if (retval) {
-		dprintk("Failed to set freq to 0x%x, with error 0x%x\n",
+		dprintk("Failed to set freq to 0x%x, with error 0x%lx\n",
 		        value, retval);
 		return -ENODEV;
 	}
@@ -74,7 +74,7 @@ processor_get_pstate (
 
 	if (retval)
 		dprintk("Failed to get current freq with "
-		        "error 0x%x, idx 0x%x\n", retval, *value);
+			"error 0x%lx, idx 0x%x\n", retval, *value);
 
 	return (int)retval;
 }
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index d45f215bc8f..51b75cea701 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -1232,9 +1232,10 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 				if (md->attribute & EFI_MEMORY_WP) {
 					name = "System ROM";
 					flags |= IORESOURCE_READONLY;
-				} else {
+				} else if (md->attribute == EFI_MEMORY_UC)
+					name = "Uncached RAM";
+				else
 					name = "System RAM";
-				}
 				break;
 
 			case EFI_ACPI_MEMORY_NVS:
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index ca2bb95726d..0dd6c1419d8 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -23,6 +23,11 @@
  * 11/07/2000
  */
 /*
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ */
+/*
  * Global (preserved) predicate usage on syscall entry/exit path:
  *
  *	pKStk:		See entry.h.
@@ -45,6 +50,7 @@
 
 #include "minstate.h"
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 	/*
 	 * execve() is special because in case of success, we need to
 	 * setup a null register window frame.
@@ -173,6 +179,7 @@ GLOBAL_ENTRY(sys_clone)
 	mov rp=loc0
 	br.ret.sptk.many rp
 END(sys_clone)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
 
 /*
  * prev_task <- ia64_switch_to(struct task_struct *next)
@@ -180,7 +187,7 @@ END(sys_clone)
  *	called.  The code starting at .map relies on this.  The rest of the code
  *	doesn't care about the interrupt masking status.
  */
-GLOBAL_ENTRY(ia64_switch_to)
+GLOBAL_ENTRY(__paravirt_switch_to)
 	.prologue
 	alloc r16=ar.pfs,1,0,0,0
 	DO_SAVE_SWITCH_STACK
@@ -204,7 +211,7 @@ GLOBAL_ENTRY(ia64_switch_to)
 	;;
 .done:
 	ld8 sp=[r21]			// load kernel stack pointer of new task
-	mov IA64_KR(CURRENT)=in0	// update "current" application register
+	MOV_TO_KR(CURRENT, in0, r8, r9)		// update "current" application register
 	mov r8=r13			// return pointer to previously running task
 	mov r13=in0			// set "current" pointer
 	;;
@@ -216,26 +223,25 @@ GLOBAL_ENTRY(ia64_switch_to)
 	br.ret.sptk.many rp		// boogie on out in new context
 
 .map:
-	rsm psr.ic			// interrupts (psr.i) are already disabled here
+	RSM_PSR_IC(r25)			// interrupts (psr.i) are already disabled here
 	movl r25=PAGE_KERNEL
 	;;
 	srlz.d
 	or r23=r25,r20			// construct PA | page properties
 	mov r25=IA64_GRANULE_SHIFT<<2
 	;;
-	mov cr.itir=r25
-	mov cr.ifa=in0			// VA of next task...
+	MOV_TO_ITIR(p0, r25, r8)
+	MOV_TO_IFA(in0, r8)		// VA of next task...
 	;;
 	mov r25=IA64_TR_CURRENT_STACK
-	mov IA64_KR(CURRENT_STACK)=r26	// remember last page we mapped...
+	MOV_TO_KR(CURRENT_STACK, r26, r8, r9)	// remember last page we mapped...
 	;;
 	itr.d dtr[r25]=r23		// wire in new mapping...
-	ssm psr.ic			// reenable the psr.ic bit
-	;;
-	srlz.d
+	SSM_PSR_IC_AND_SRLZ_D(r8, r9)	// reenable the psr.ic bit
 	br.cond.sptk .done
-END(ia64_switch_to)
+END(__paravirt_switch_to)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 /*
  * Note that interrupts are enabled during save_switch_stack and load_switch_stack.  This
  * means that we may get an interrupt with "sp" pointing to the new kernel stack while
@@ -375,7 +381,7 @@ END(save_switch_stack)
  *	- b7 holds address to return to
  *	- must not touch r8-r11
  */
-ENTRY(load_switch_stack)
+GLOBAL_ENTRY(load_switch_stack)
 	.prologue
 	.altrp b7
 
@@ -571,7 +577,7 @@ GLOBAL_ENTRY(ia64_trace_syscall)
 .ret3:
 (pUStk)	cmp.eq.unc p6,p0=r0,r0			// p6 <- pUStk
 (pUStk)	rsm psr.i				// disable interrupts
-	br.cond.sptk .work_pending_syscall_end
+	br.cond.sptk ia64_work_pending_syscall_end
 
 strace_error:
 	ld8 r3=[r2]				// load pt_regs.r8
@@ -636,8 +642,17 @@ GLOBAL_ENTRY(ia64_ret_from_syscall)
 	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
 	mov r10=r0				// clear error indication in r10
 (p7)	br.cond.spnt handle_syscall_error	// handle potential syscall failure
+#ifdef CONFIG_PARAVIRT
+	;;
+	br.cond.sptk.few ia64_leave_syscall
+	;;
+#endif /* CONFIG_PARAVIRT */
 END(ia64_ret_from_syscall)
+#ifndef CONFIG_PARAVIRT
 	// fall through
+#endif
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
+
 /*
  * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
  *	need to switch to bank 0 and doesn't restore the scratch registers.
@@ -682,7 +697,7 @@ END(ia64_ret_from_syscall)
  *	      ar.csd: cleared
  *	      ar.ssd: cleared
  */
-ENTRY(ia64_leave_syscall)
+GLOBAL_ENTRY(__paravirt_leave_syscall)
 	PT_REGS_UNWIND_INFO(0)
 	/*
 	 * work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -692,11 +707,11 @@ ENTRY(ia64_leave_syscall)
 	 * extra work.  We always check for extra work when returning to user-level.
 	 * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
 	 * is 0.  After extra work processing has been completed, execution
-	 * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+	 * resumes at ia64_work_processed_syscall with p6 set to 1 if the extra-work-check
 	 * needs to be redone.
 	 */
 #ifdef CONFIG_PREEMPT
-	rsm psr.i				// disable interrupts
+	RSM_PSR_I(p0, r2, r18)			// disable interrupts
 	cmp.eq pLvSys,p0=r0,r0			// pLvSys=1: leave from syscall
 (pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
@@ -706,11 +721,12 @@ ENTRY(ia64_leave_syscall)
 	;;
 	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
 #else /* !CONFIG_PREEMPT */
-(pUStk)	rsm psr.i
+	RSM_PSR_I(pUStk, r2, r18)
 	cmp.eq pLvSys,p0=r0,r0		// pLvSys=1: leave from syscall
 (pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
 #endif
-.work_processed_syscall:
+.global __paravirt_work_processed_syscall;
+__paravirt_work_processed_syscall:
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	adds r2=PT(LOADRS)+16,r12
 (pUStk)	mov.m r22=ar.itc			// fetch time at leave
@@ -744,7 +760,7 @@ ENTRY(ia64_leave_syscall)
 (pNonSys) break 0		//      bug check: we shouldn't be here if pNonSys is TRUE!
 	;;
 	invala			// M0|1 invalidate ALAT
-	rsm psr.i | psr.ic	// M2   turn off interrupts and interruption collection
+	RSM_PSR_I_IC(r28, r29, r30)	// M2   turn off interrupts and interruption collection
 	cmp.eq p9,p0=r0,r0	// A    set p9 to indicate that we should restore cr.ifs
 
 	ld8 r29=[r2],16		// M0|1 load cr.ipsr
@@ -765,7 +781,7 @@ ENTRY(ia64_leave_syscall)
 	;;
 #endif
 	ld8 r26=[r2],PT(B0)-PT(AR_PFS)	// M0|1 load ar.pfs
-(pKStk)	mov r22=psr			// M2   read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r21)	// M2   read PSR now that interrupts are disabled
 	nop 0
 	;;
 	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
@@ -798,7 +814,7 @@ ENTRY(ia64_leave_syscall)
 
 	srlz.d				// M0   ensure interruption collection is off (for cover)
 	shr.u r18=r19,16		// I0|1 get byte size of existing "dirty" partition
-	cover				// B    add current frame into dirty partition & set cr.ifs
+	COVER				// B    add current frame into dirty partition & set cr.ifs
 	;;
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	mov r19=ar.bsp			// M2   get new backing store pointer
@@ -823,8 +839,9 @@ ENTRY(ia64_leave_syscall)
 	mov.m ar.ssd=r0			// M2   clear ar.ssd
 	mov f11=f0			// F    clear f11
 	br.cond.sptk.many rbs_switch	// B
-END(ia64_leave_syscall)
+END(__paravirt_leave_syscall)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 #ifdef CONFIG_IA32_SUPPORT
 GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
 	PT_REGS_UNWIND_INFO(0)
@@ -835,10 +852,20 @@ GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
 	st8.spill [r2]=r8	// store return value in slot for r8 and set unat bit
 	.mem.offset 8,0
 	st8.spill [r3]=r0	// clear error indication in slot for r10 and set unat bit
+#ifdef CONFIG_PARAVIRT
+	;;
+	// don't fall through, ia64_leave_kernel may be #define'd
+	br.cond.sptk.few ia64_leave_kernel
+	;;
+#endif /* CONFIG_PARAVIRT */
 END(ia64_ret_from_ia32_execve)
+#ifndef CONFIG_PARAVIRT
 	// fall through
+#endif
 #endif /* CONFIG_IA32_SUPPORT */
-GLOBAL_ENTRY(ia64_leave_kernel)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
+
+GLOBAL_ENTRY(__paravirt_leave_kernel)
 	PT_REGS_UNWIND_INFO(0)
 	/*
 	 * work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -852,7 +879,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * needs to be redone.
 	 */
 #ifdef CONFIG_PREEMPT
-	rsm psr.i				// disable interrupts
+	RSM_PSR_I(p0, r17, r31)			// disable interrupts
 	cmp.eq p0,pLvSys=r0,r0			// pLvSys=0: leave from kernel
 (pKStk)	adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
@@ -862,7 +889,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	;;
 	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
 #else
-(pUStk)	rsm psr.i
+	RSM_PSR_I(pUStk, r17, r31)
 	cmp.eq p0,pLvSys=r0,r0		// pLvSys=0: leave from kernel
 (pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
 #endif
@@ -910,7 +937,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	mov ar.csd=r30
 	mov ar.ssd=r31
 	;;
-	rsm psr.i | psr.ic	// initiate turning off of interrupt and interruption collection
+	RSM_PSR_I_IC(r23, r22, r25)	// initiate turning off of interrupt and interruption collection
 	invala			// invalidate ALAT
 	;;
 	ld8.fill r22=[r2],24
@@ -942,7 +969,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	mov ar.ccv=r15
 	;;
 	ldf.fill f11=[r2]
-	bsw.0			// switch back to bank 0 (no stop bit required beforehand...)
+	BSW_0(r2, r3, r15)	// switch back to bank 0 (no stop bit required beforehand...)
 	;;
 (pUStk)	mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency)
 	adds r16=PT(CR_IPSR)+16,r12
@@ -950,12 +977,12 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	.pred.rel.mutex pUStk,pKStk
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r29)	// M2 read PSR now that interrupts are disabled
 (pUStk)	mov.m r22=ar.itc	// M  fetch time at leave
 	nop.i 0
 	;;
 #else
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r29)	// M2 read PSR now that interrupts are disabled
 	nop.i 0
 	nop.i 0
 	;;
@@ -1027,7 +1054,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * NOTE: alloc, loadrs, and cover can't be predicated.
 	 */
 (pNonSys) br.cond.dpnt dont_preserve_current_frame
-	cover				// add current frame into dirty partition and set cr.ifs
+	COVER				// add current frame into dirty partition and set cr.ifs
 	;;
 	mov r19=ar.bsp			// get new backing store pointer
 rbs_switch:
@@ -1130,16 +1157,16 @@ skip_rbs_switch:
 (pKStk)	dep r29=r22,r29,21,1	// I0 update ipsr.pp with psr.pp
 (pLvSys)mov r16=r0		// A  clear r16 for leave_syscall, no-op otherwise
 	;;
-	mov cr.ipsr=r29		// M2
+	MOV_TO_IPSR(p0, r29, r25)	// M2
 	mov ar.pfs=r26		// I0
 (pLvSys)mov r17=r0		// A  clear r17 for leave_syscall, no-op otherwise
 
-(p9)	mov cr.ifs=r30		// M2
+	MOV_TO_IFS(p9, r30, r25)// M2
 	mov b0=r21		// I0
 (pLvSys)mov r18=r0		// A  clear r18 for leave_syscall, no-op otherwise
 
 	mov ar.fpsr=r20		// M2
-	mov cr.iip=r28		// M2
+	MOV_TO_IIP(r28, r25)	// M2
 	nop 0
 	;;
 (pUStk)	mov ar.rnat=r24		// M2 must happen with RSE in lazy mode
@@ -1148,7 +1175,7 @@ skip_rbs_switch:
 
 	mov ar.rsc=r27		// M2
 	mov pr=r31,-1		// I0
-	rfi			// B
+	RFI			// B
 
 	/*
 	 * On entry:
@@ -1174,35 +1201,36 @@ skip_rbs_switch:
 	;;
 (pKStk) st4 [r20]=r21
 #endif
-	ssm psr.i		// enable interrupts
+	SSM_PSR_I(p0, p6, r2)	// enable interrupts
 	br.call.spnt.many rp=schedule
 .ret9:	cmp.eq p6,p0=r0,r0	// p6 <- 1 (re-check)
-	rsm psr.i		// disable interrupts
+	RSM_PSR_I(p0, r2, r20)	// disable interrupts
 	;;
 #ifdef CONFIG_PREEMPT
 (pKStk)	adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
 (pKStk)	st4 [r20]=r0		// preempt_count() <- 0
 #endif
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
+(pLvSys)br.cond.sptk.few  __paravirt_pending_syscall_end
 	br.cond.sptk.many .work_processed_kernel
 
 .notify:
 (pUStk)	br.call.spnt.many rp=notify_resume_user
 .ret10:	cmp.ne p6,p0=r0,r0	// p6 <- 0 (don't re-check)
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
+(pLvSys)br.cond.sptk.few  __paravirt_pending_syscall_end
 	br.cond.sptk.many .work_processed_kernel
 
-.work_pending_syscall_end:
+.global __paravirt_pending_syscall_end;
+__paravirt_pending_syscall_end:
 	adds r2=PT(R8)+16,r12
 	adds r3=PT(R10)+16,r12
 	;;
 	ld8 r8=[r2]
 	ld8 r10=[r3]
-	br.cond.sptk.many .work_processed_syscall
-
-END(ia64_leave_kernel)
+	br.cond.sptk.many __paravirt_work_processed_syscall_target
+END(__paravirt_leave_kernel)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 ENTRY(handle_syscall_error)
 	/*
 	 * Some system calls (e.g., ptrace, mmap) can return arbitrary values which could
@@ -1244,7 +1272,7 @@ END(ia64_invoke_schedule_tail)
 	 * We declare 8 input registers so the system call args get preserved,
 	 * in case we need to restart a system call.
 	 */
-ENTRY(notify_resume_user)
+GLOBAL_ENTRY(notify_resume_user)
 	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
 	alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs in case of syscall restart!
 	mov r9=ar.unat
@@ -1306,7 +1334,7 @@ ENTRY(sys_rt_sigreturn)
 	adds sp=16,sp
 	;;
 	ld8 r9=[sp]				// load new ar.unat
-	mov.sptk b7=r8,ia64_leave_kernel
+	mov.sptk b7=r8,ia64_native_leave_kernel
 	;;
 	mov ar.unat=r9
 	br.many b7
@@ -1663,5 +1691,12 @@ sys_call_table:
 	data8 sys_timerfd_create		// 1310
 	data8 sys_timerfd_settime
 	data8 sys_timerfd_gettime
+	data8 sys_signalfd4
+	data8 sys_eventfd2
+	data8 sys_epoll_create1			// 1315
+	data8 sys_dup3
+	data8 sys_pipe2
+	data8 sys_inotify_init1
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index b642648cc2a..c539c689493 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -55,7 +55,8 @@ static u64 resources[NR_CPUS];
 
 #define show(name) 							\
 static ssize_t 								\
-show_##name(struct sys_device *dev, char *buf)				\
+show_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+		char *buf)						\
 {									\
 	u32 cpu=dev->id;						\
 	return sprintf(buf, "%lx\n", name[cpu]);			\
@@ -63,7 +64,8 @@ show_##name(struct sys_device *dev, char *buf)				\
 
 #define store(name)							\
 static ssize_t 								\
-store_##name(struct sys_device *dev, const char *buf, size_t size)	\
+store_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+					const char *buf, size_t size)	\
 {									\
 	unsigned int cpu=dev->id;					\
 	name[cpu] = simple_strtoull(buf, NULL, 16);			\
@@ -76,7 +78,8 @@ show(call_start)
  * processor. The cpu number in driver is only used for storing data.
  */
 static ssize_t
-store_call_start(struct sys_device *dev, const char *buf, size_t size)
+store_call_start(struct sys_device *dev, struct sysdev_attribute *attr,
+		const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	unsigned long call_start = simple_strtoull(buf, NULL, 16);
@@ -124,14 +127,16 @@ show(err_type_info)
 store(err_type_info)
 
 static ssize_t
-show_virtual_to_phys(struct sys_device *dev, char *buf)
+show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+			char *buf)
 {
 	unsigned int cpu=dev->id;
 	return sprintf(buf, "%lx\n", phys_addr[cpu]);
 }
 
 static ssize_t
-store_virtual_to_phys(struct sys_device *dev, const char *buf, size_t size)
+store_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	u64 virt_addr=simple_strtoull(buf, NULL, 16);
@@ -154,7 +159,8 @@ show(err_struct_info)
 store(err_struct_info)
 
 static ssize_t
-show_err_data_buffer(struct sys_device *dev, char *buf)
+show_err_data_buffer(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned int cpu=dev->id;
 
@@ -165,7 +171,9 @@ show_err_data_buffer(struct sys_device *dev, char *buf)
 }
 
 static ssize_t
-store_err_data_buffer(struct sys_device *dev, const char *buf, size_t size)
+store_err_data_buffer(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	int ret;
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index ddeab4e36fd..8bdea8eb62e 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -26,11 +26,14 @@
 #include <asm/mmu_context.h>
 #include <asm/asm-offsets.h>
 #include <asm/pal.h>
+#include <asm/paravirt.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/system.h>
 #include <asm/mca_asm.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define SAL_PSR_BITS_TO_SET				\
@@ -356,7 +359,31 @@ start_ap:
 	mov ar.rsc=0		// place RSE in enforced lazy mode
 	;;
 	loadrs			// clear the dirty partition
-	mov IA64_KR(PER_CPU_DATA)=r0	// clear physical per-CPU base
+	movl r19=__phys_per_cpu_start
+	mov r18=PERCPU_PAGE_SIZE
+	;;
+#ifndef CONFIG_SMP
+	add r19=r19,r18
+	;;
+#else
+(isAP)	br.few 2f
+	mov r20=r19
+	sub r19=r19,r18
+	;;
+	shr.u r18=r18,3
+1:
+	ld8 r21=[r20],8;;
+	st8[r19]=r21,8
+	adds r18=-1,r18;;
+	cmp4.lt p7,p6=0,r18
+(p7)	br.cond.dptk.few 1b
+2:
+#endif
+	tpa r19=r19
+	;;
+	.pred.rel.mutex isBP,isAP
+(isBP)	mov IA64_KR(PER_CPU_DATA)=r19	// per-CPU base for cpu0
+(isAP)	mov IA64_KR(PER_CPU_DATA)=r0	// clear physical per-CPU base
 	;;
 	mov ar.bspstore=r2	// establish the new RSE stack
 	;;
@@ -367,6 +394,44 @@ start_ap:
 	;;
 (isBP)	st8 [r2]=r28		// save the address of the boot param area passed by the bootloader
 
+#ifdef CONFIG_PARAVIRT
+
+	movl r14=hypervisor_setup_hooks
+	movl r15=hypervisor_type
+	mov r16=num_hypervisor_hooks
+	;;
+	ld8 r2=[r15]
+	;;
+	cmp.ltu p7,p0=r2,r16	// array size check
+	shladd r8=r2,3,r14
+	;;
+(p7)	ld8 r9=[r8]
+	;;
+(p7)	mov b1=r9
+(p7)	cmp.ne.unc p7,p0=r9,r0	// no actual branch to NULL
+	;;
+(p7)	br.call.sptk.many rp=b1
+
+	__INITDATA
+
+default_setup_hook = 0		// Currently nothing needs to be done.
+
+	.weak xen_setup_hook
+
+	.global hypervisor_type
+hypervisor_type:
+	data8		PARAVIRT_HYPERVISOR_TYPE_DEFAULT
+
+	// must have the same order with PARAVIRT_HYPERVISOR_TYPE_xxx
+
+hypervisor_setup_hooks:
+	data8		default_setup_hook
+	data8		xen_setup_hook
+num_hypervisor_hooks = (. - hypervisor_setup_hooks) / 8
+	.previous
+
+#endif
+
 #ifdef CONFIG_SMP
 (isAP)	br.call.sptk.many rp=start_secondary
 .ret0:
@@ -1082,7 +1147,7 @@ SET_REG(b5);
 	 *   p15    - used to track flag status.
 	 *
 	 * If you patch this code to use more registers, do not forget to update
-	 * the clobber lists for spin_lock() in include/asm-ia64/spinlock.h.
+	 * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
 	 */
 
 #if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 39752cdef6f..5c4674ae8ae 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -69,7 +69,7 @@
  *     systems, we use one-to-one mapping between IA-64 vector and IRQ.  A
  *     platform can implement platform_irq_to_vector(irq) and
  *     platform_local_vector_to_irq(vector) APIs to differentiate the mapping.
- *     Please see also include/asm-ia64/hw_irq.h for those APIs.
+ *     Please see also arch/ia64/include/asm/hw_irq.h for those APIs.
  *
  * To sum up, there are three levels of mappings involved:
  *
@@ -585,6 +585,15 @@ static inline int irq_is_shared (int irq)
 	return (iosapic_intr_info[irq].count > 1);
 }
 
+struct irq_chip*
+ia64_native_iosapic_get_irq_chip(unsigned long trigger)
+{
+	if (trigger == IOSAPIC_EDGE)
+		return &irq_type_iosapic_edge;
+	else
+		return &irq_type_iosapic_level;
+}
+
 static int
 register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	       unsigned long polarity, unsigned long trigger)
@@ -635,13 +644,10 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	iosapic_intr_info[irq].dmode    = delivery;
 	iosapic_intr_info[irq].trigger  = trigger;
 
-	if (trigger == IOSAPIC_EDGE)
-		irq_type = &irq_type_iosapic_edge;
-	else
-		irq_type = &irq_type_iosapic_level;
+	irq_type = iosapic_get_irq_chip(trigger);
 
 	idesc = irq_desc + irq;
-	if (idesc->chip != irq_type) {
+	if (irq_type != NULL && idesc->chip != irq_type) {
 		if (idesc->chip != &no_irq_type)
 			printk(KERN_WARNING
 			       "%s: changing vector %d from %s to %s\n",
@@ -974,6 +980,22 @@ iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
 }
 
 void __init
+ia64_native_iosapic_pcat_compat_init(void)
+{
+	if (pcat_compat) {
+		/*
+		 * Disable the compatibility mode interrupts (8259 style),
+		 * needs IN/OUT support enabled.
+		 */
+		printk(KERN_INFO
+		       "%s: Disabling PC-AT compatible 8259 interrupts\n",
+		       __func__);
+		outb(0xff, 0xA1);
+		outb(0xff, 0x21);
+	}
+}
+
+void __init
 iosapic_system_init (int system_pcat_compat)
 {
 	int irq;
@@ -987,17 +1009,8 @@ iosapic_system_init (int system_pcat_compat)
 	}
 
 	pcat_compat = system_pcat_compat;
-	if (pcat_compat) {
-		/*
-		 * Disable the compatibility mode interrupts (8259 style),
-		 * needs IN/OUT support enabled.
-		 */
-		printk(KERN_INFO
-		       "%s: Disabling PC-AT compatible 8259 interrupts\n",
-		       __func__);
-		outb(0xff, 0xA1);
-		outb(0xff, 0x21);
-	}
+	if (pcat_compat)
+		iosapic_pcat_compat_init();
 }
 
 static inline int
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 5538471e8d6..28d3d483db9 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -196,7 +196,7 @@ static void clear_irq_vector(int irq)
 }
 
 int
-assign_irq_vector (int irq)
+ia64_native_assign_irq_vector (int irq)
 {
 	unsigned long flags;
 	int vector, cpu;
@@ -222,7 +222,7 @@ assign_irq_vector (int irq)
 }
 
 void
-free_irq_vector (int vector)
+ia64_native_free_irq_vector (int vector)
 {
 	if (vector < IA64_FIRST_DEVICE_VECTOR ||
 	    vector > IA64_LAST_DEVICE_VECTOR)
@@ -600,7 +600,6 @@ static irqreturn_t dummy_handler (int irq, void *dev_id)
 {
 	BUG();
 }
-extern irqreturn_t handle_IPI (int irq, void *dev_id);
 
 static struct irqaction ipi_irqaction = {
 	.handler =	handle_IPI,
@@ -623,7 +622,7 @@ static struct irqaction tlb_irqaction = {
 #endif
 
 void
-register_percpu_irq (ia64_vector vec, struct irqaction *action)
+ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action)
 {
 	irq_desc_t *desc;
 	unsigned int irq;
@@ -638,13 +637,21 @@ register_percpu_irq (ia64_vector vec, struct irqaction *action)
 }
 
 void __init
-init_IRQ (void)
+ia64_native_register_ipi(void)
 {
-	register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
 #ifdef CONFIG_SMP
 	register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
 	register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction);
 	register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &tlb_irqaction);
+#endif
+}
+
+void __init
+init_IRQ (void)
+{
+	ia64_register_ipi();
+	register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
+#ifdef CONFIG_SMP
 #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)
 	if (vector_domain_type != VECTOR_DOMAIN_NONE) {
 		BUG_ON(IA64_FIRST_DEVICE_VECTOR != IA64_IRQ_MOVE_VECTOR);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 80b44ea052d..416a952b19b 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -12,6 +12,14 @@
  *
  * 00/08/23 Asit Mallick <asit.k.mallick@intel.com> TLB handling for SMP
  * 00/12/20 David Mosberger-Tang <davidm@hpl.hp.com> DTLB/ITLB handler now uses virtual PT.
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *	Dan Magenheimer <dan.magenheimer@hp.com>
+ *      Xen paravirtualization
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ *      Yaozu (Eddie) Dong <eddie.dong@intel.com>
  */
 /*
  * This file defines the interruption vector table used by the CPU.
@@ -102,13 +110,13 @@ ENTRY(vhpt_miss)
 	 *	- the faulting virtual address uses unimplemented address bits
 	 *	- the faulting virtual address has no valid page table mapping
 	 */
-	mov r16=cr.ifa				// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)			// get address that caused the TLB miss
 #ifdef CONFIG_HUGETLB_PAGE
 	movl r18=PAGE_SHIFT
-	mov r25=cr.itir
+	MOV_FROM_ITIR(r25)
 #endif
 	;;
-	rsm psr.dt				// use physical addressing for data
+	RSM_PSR_DT				// use physical addressing for data
 	mov r31=pr				// save the predicate registers
 	mov r19=IA64_KR(PT_BASE)		// get page table base address
 	shl r21=r16,3				// shift bit 60 into sign bit
@@ -168,21 +176,21 @@ ENTRY(vhpt_miss)
 	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// r21=pte_offset(pmd,addr)
 	;;
 (p7)	ld8 r18=[r21]				// read *pte
-	mov r19=cr.isr				// cr.isr bit 32 tells us if this is an insn miss
+	MOV_FROM_ISR(r19)			// cr.isr bit 32 tells us if this is an insn miss
 	;;
 (p7)	tbit.z p6,p7=r18,_PAGE_P_BIT		// page present bit cleared?
-	mov r22=cr.iha				// get the VHPT address that caused the TLB miss
+	MOV_FROM_IHA(r22)			// get the VHPT address that caused the TLB miss
 	;;					// avoid RAW on p7
 (p7)	tbit.nz.unc p10,p11=r19,32		// is it an instruction TLB miss?
 	dep r23=0,r20,0,PAGE_SHIFT		// clear low bits to get page address
 	;;
-(p10)	itc.i r18				// insert the instruction TLB entry
-(p11)	itc.d r18				// insert the data TLB entry
+	ITC_I_AND_D(p10, p11, r18, r24)		// insert the instruction TLB entry and
+						// insert the data TLB entry
 (p6)	br.cond.spnt.many page_fault		// handle bad address/page not present (page fault)
-	mov cr.ifa=r22
+	MOV_TO_IFA(r22, r24)
 
 #ifdef CONFIG_HUGETLB_PAGE
-(p8)	mov cr.itir=r25				// change to default page-size for VHPT
+	MOV_TO_ITIR(p8, r25, r24)		// change to default page-size for VHPT
 #endif
 
 	/*
@@ -192,7 +200,7 @@ ENTRY(vhpt_miss)
 	 */
 	adds r24=__DIRTY_BITS_NO_ED|_PAGE_PL_0|_PAGE_AR_RW,r23
 	;;
-(p7)	itc.d r24
+	ITC_D(p7, r24, r25)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -234,7 +242,7 @@ ENTRY(vhpt_miss)
 #endif
 
 	mov pr=r31,-1				// restore predicate registers
-	rfi
+	RFI
 END(vhpt_miss)
 
 	.org ia64_ivt+0x400
@@ -248,11 +256,11 @@ ENTRY(itlb_miss)
 	 * mode, walk the page table, and then re-execute the PTE read and
 	 * go on normally after that.
 	 */
-	mov r16=cr.ifa				// get virtual address
+	MOV_FROM_IFA(r16)			// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 .itlb_fault:
-	mov r17=cr.iha				// get virtual address of PTE
+	MOV_FROM_IHA(r17)			// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
 1:	ld8 r18=[r17]				// read *pte
@@ -261,7 +269,7 @@ ENTRY(itlb_miss)
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
 (p6)	br.cond.spnt page_fault
 	;;
-	itc.i r18
+	ITC_I(p0, r18, r19)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -278,7 +286,7 @@ ENTRY(itlb_miss)
 (p7)	ptc.l r16,r20
 #endif
 	mov pr=r31,-1
-	rfi
+	RFI
 END(itlb_miss)
 
 	.org ia64_ivt+0x0800
@@ -292,11 +300,11 @@ ENTRY(dtlb_miss)
 	 * mode, walk the page table, and then re-execute the PTE read and
 	 * go on normally after that.
 	 */
-	mov r16=cr.ifa				// get virtual address
+	MOV_FROM_IFA(r16)			// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 dtlb_fault:
-	mov r17=cr.iha				// get virtual address of PTE
+	MOV_FROM_IHA(r17)			// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
 1:	ld8 r18=[r17]				// read *pte
@@ -305,7 +313,7 @@ dtlb_fault:
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
 (p6)	br.cond.spnt page_fault
 	;;
-	itc.d r18
+	ITC_D(p0, r18, r19)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -322,7 +330,7 @@ dtlb_fault:
 (p7)	ptc.l r16,r20
 #endif
 	mov pr=r31,-1
-	rfi
+	RFI
 END(dtlb_miss)
 
 	.org ia64_ivt+0x0c00
@@ -330,9 +338,9 @@ END(dtlb_miss)
 // 0x0c00 Entry 3 (size 64 bundles) Alt ITLB (19)
 ENTRY(alt_itlb_miss)
 	DBG_FAULT(3)
-	mov r16=cr.ifa		// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)	// get address that caused the TLB miss
 	movl r17=PAGE_KERNEL
-	mov r21=cr.ipsr
+	MOV_FROM_IPSR(p0, r21)
 	movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
 	mov r31=pr
 	;;
@@ -341,9 +349,9 @@ ENTRY(alt_itlb_miss)
 	;;
 	cmp.gt p8,p0=6,r22			// user mode
 	;;
-(p8)	thash r17=r16
+	THASH(p8, r17, r16, r23)
 	;;
-(p8)	mov cr.iha=r17
+	MOV_TO_IHA(p8, r17, r23)
 (p8)	mov r29=b0				// save b0
 (p8)	br.cond.dptk .itlb_fault
 #endif
@@ -358,9 +366,9 @@ ENTRY(alt_itlb_miss)
 	or r19=r19,r18		// set bit 4 (uncached) if the access was to region 6
 (p8)	br.cond.spnt page_fault
 	;;
-	itc.i r19		// insert the TLB entry
+	ITC_I(p0, r19, r18)	// insert the TLB entry
 	mov pr=r31,-1
-	rfi
+	RFI
 END(alt_itlb_miss)
 
 	.org ia64_ivt+0x1000
@@ -368,11 +376,11 @@ END(alt_itlb_miss)
 // 0x1000 Entry 4 (size 64 bundles) Alt DTLB (7,46)
 ENTRY(alt_dtlb_miss)
 	DBG_FAULT(4)
-	mov r16=cr.ifa		// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)	// get address that caused the TLB miss
 	movl r17=PAGE_KERNEL
-	mov r20=cr.isr
+	MOV_FROM_ISR(r20)
 	movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
-	mov r21=cr.ipsr
+	MOV_FROM_IPSR(p0, r21)
 	mov r31=pr
 	mov r24=PERCPU_ADDR
 	;;
@@ -381,9 +389,9 @@ ENTRY(alt_dtlb_miss)
 	;;
 	cmp.gt p8,p0=6,r22			// access to region 0-5
 	;;
-(p8)	thash r17=r16
+	THASH(p8, r17, r16, r25)
 	;;
-(p8)	mov cr.iha=r17
+	MOV_TO_IHA(p8, r17, r25)
 (p8)	mov r29=b0				// save b0
 (p8)	br.cond.dptk dtlb_fault
 #endif
@@ -402,7 +410,7 @@ ENTRY(alt_dtlb_miss)
 	tbit.nz p9,p0=r20,IA64_ISR_NA_BIT	// is non-access bit on?
 	;;
 (p10)	sub r19=r19,r26
-(p10)	mov cr.itir=r25
+	MOV_TO_ITIR(p10, r25, r24)
 	cmp.ne p8,p0=r0,r23
 (p9)	cmp.eq.or.andcm p6,p7=IA64_ISR_CODE_LFETCH,r22	// check isr.code field
 (p12)	dep r17=-1,r17,4,1			// set ma=UC for region 6 addr
@@ -411,11 +419,11 @@ ENTRY(alt_dtlb_miss)
 	dep r21=-1,r21,IA64_PSR_ED_BIT,1
 	;;
 	or r19=r19,r17		// insert PTE control bits into r19
-(p6)	mov cr.ipsr=r21
+	MOV_TO_IPSR(p6, r21, r24)
 	;;
-(p7)	itc.d r19		// insert the TLB entry
+	ITC_D(p7, r19, r18)	// insert the TLB entry
 	mov pr=r31,-1
-	rfi
+	RFI
 END(alt_dtlb_miss)
 
 	.org ia64_ivt+0x1400
@@ -444,10 +452,10 @@ ENTRY(nested_dtlb_miss)
 	 *
 	 * Clobbered:	b0, r18, r19, r21, r22, psr.dt (cleared)
 	 */
-	rsm psr.dt				// switch to using physical data addressing
+	RSM_PSR_DT				// switch to using physical data addressing
 	mov r19=IA64_KR(PT_BASE)		// get the page table base address
 	shl r21=r16,3				// shift bit 60 into sign bit
-	mov r18=cr.itir
+	MOV_FROM_ITIR(r18)
 	;;
 	shr.u r17=r16,61			// get the region number into r17
 	extr.u r18=r18,2,6			// get the faulting page size
@@ -507,33 +515,6 @@ ENTRY(ikey_miss)
 	FAULT(6)
 END(ikey_miss)
 
-	//-----------------------------------------------------------------------------------
-	// call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
-ENTRY(page_fault)
-	ssm psr.dt
-	;;
-	srlz.i
-	;;
-	SAVE_MIN_WITH_COVER
-	alloc r15=ar.pfs,0,0,3,0
-	mov out0=cr.ifa
-	mov out1=cr.isr
-	adds r3=8,r2				// set up second base pointer
-	;;
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collectin is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	movl r14=ia64_leave_kernel
-	;;
-	SAVE_REST
-	mov rp=r14
-	;;
-	adds out2=16,r12			// out2 = pointer to pt_regs
-	br.call.sptk.many b6=ia64_do_page_fault	// ignore return address
-END(page_fault)
-
 	.org ia64_ivt+0x1c00
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x1c00 Entry 7 (size 64 bundles) Data Key Miss (12,51)
@@ -556,10 +537,10 @@ ENTRY(dirty_bit)
 	 * page table TLB entry isn't present, we take a nested TLB miss hit where we look
 	 * up the physical address of the L3 PTE and then continue at label 1 below.
 	 */
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r29=b0				// save b0 in case of nested fault
 	mov r31=pr				// save pr
 #ifdef CONFIG_SMP
@@ -576,7 +557,7 @@ ENTRY(dirty_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only compare if page is present
 	;;
-(p6)	itc.d r25				// install updated PTE
+	ITC_D(p6, r25, r18)			// install updated PTE
 	;;
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
@@ -602,7 +583,7 @@ ENTRY(dirty_bit)
 	itc.d r18				// install updated PTE
 #endif
 	mov pr=r31,-1				// restore pr
-	rfi
+	RFI
 END(dirty_bit)
 
 	.org ia64_ivt+0x2400
@@ -611,22 +592,22 @@ END(dirty_bit)
 ENTRY(iaccess_bit)
 	DBG_FAULT(9)
 	// Like Entry 8, except for instruction access
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	mov r31=pr				// save predicates
 #ifdef CONFIG_ITANIUM
 	/*
 	 * Erratum 10 (IFA may contain incorrect address) has "NoFix" status.
 	 */
-	mov r17=cr.ipsr
+	MOV_FROM_IPSR(p0, r17)
 	;;
-	mov r18=cr.iip
+	MOV_FROM_IIP(r18)
 	tbit.z p6,p0=r17,IA64_PSR_IS_BIT	// IA64 instruction set?
 	;;
 (p6)	mov r16=r18				// if so, use cr.iip instead of cr.ifa
 #endif /* CONFIG_ITANIUM */
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r29=b0				// save b0 in case of nested fault)
 #ifdef CONFIG_SMP
 	mov r28=ar.ccv				// save ar.ccv
@@ -642,7 +623,7 @@ ENTRY(iaccess_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only if page present
 	;;
-(p6)	itc.i r25				// install updated PTE
+	ITC_I(p6, r25, r26)			// install updated PTE
 	;;
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
@@ -668,7 +649,7 @@ ENTRY(iaccess_bit)
 	itc.i r18				// install updated PTE
 #endif /* !CONFIG_SMP */
 	mov pr=r31,-1
-	rfi
+	RFI
 END(iaccess_bit)
 
 	.org ia64_ivt+0x2800
@@ -677,10 +658,10 @@ END(iaccess_bit)
 ENTRY(daccess_bit)
 	DBG_FAULT(10)
 	// Like Entry 8, except for data access
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r31=pr
 	mov r29=b0				// save b0 in case of nested fault)
 #ifdef CONFIG_SMP
@@ -697,7 +678,7 @@ ENTRY(daccess_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only if page is present
 	;;
-(p6)	itc.d r25				// install updated PTE
+	ITC_D(p6, r25, r26)			// install updated PTE
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
 	 * cannot possibly affect the following loads:
@@ -721,7 +702,7 @@ ENTRY(daccess_bit)
 #endif
 	mov b0=r29				// restore b0
 	mov pr=r31,-1
-	rfi
+	RFI
 END(daccess_bit)
 
 	.org ia64_ivt+0x2c00
@@ -745,10 +726,10 @@ ENTRY(break_fault)
 	 */
 	DBG_FAULT(11)
 	mov.m r16=IA64_KR(CURRENT)		// M2 r16 <- current task (12 cyc)
-	mov r29=cr.ipsr				// M2 (12 cyc)
+	MOV_FROM_IPSR(p0, r29)			// M2 (12 cyc)
 	mov r31=pr				// I0 (2 cyc)
 
-	mov r17=cr.iim				// M2 (2 cyc)
+	MOV_FROM_IIM(r17)			// M2 (2 cyc)
 	mov.m r27=ar.rsc			// M2 (12 cyc)
 	mov r18=__IA64_BREAK_SYSCALL		// A
 
@@ -767,7 +748,7 @@ ENTRY(break_fault)
 	nop.m 0
 	movl r30=sys_call_table			// X
 
-	mov r28=cr.iip				// M2 (2 cyc)
+	MOV_FROM_IIP(r28)			// M2 (2 cyc)
 	cmp.eq p0,p7=r18,r17			// I0 is this a system call?
 (p7)	br.cond.spnt non_syscall		// B  no ->
 	//
@@ -864,18 +845,17 @@ ENTRY(break_fault)
 #endif
 	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
 	nop 0
-	bsw.1					// B (6 cyc) regs are saved, switch to bank 1
+	BSW_1(r2, r14)				// B (6 cyc) regs are saved, switch to bank 1
 	;;
 
-	ssm psr.ic | PSR_DEFAULT_BITS		// M2	now it's safe to re-enable intr.-collection
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r16)	// M2	now it's safe to re-enable intr.-collection
+						// M0   ensure interruption collection is on
 	movl r3=ia64_ret_from_syscall		// X
 	;;
-
-	srlz.i					// M0   ensure interruption collection is on
 	mov rp=r3				// I0   set the real return addr
 (p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
 
-(p15)	ssm psr.i				// M2   restore psr.i
+	SSM_PSR_I(p15, p15, r16)		// M2   restore psr.i
 (p14)	br.call.sptk.many b6=b6			// B    invoke syscall-handker (ignore return addr)
 	br.cond.spnt.many ia64_trace_syscall	// B	do syscall-tracing thingamagic
 	// NOT REACHED
@@ -895,27 +875,8 @@ END(break_fault)
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x3000 Entry 12 (size 64 bundles) External Interrupt (4)
 ENTRY(interrupt)
-	DBG_FAULT(12)
-	mov r31=pr		// prepare to save predicates
-	;;
-	SAVE_MIN_WITH_COVER	// uses r31; defines r2 and r3
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	adds r3=8,r2		// set up second base pointer for SAVE_REST
-	srlz.i			// ensure everybody knows psr.ic is back on
-	;;
-	SAVE_REST
-	;;
-	MCA_RECOVER_RANGE(interrupt)
-	alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
-	mov out0=cr.ivr		// pass cr.ivr as first arg
-	add out1=16,sp		// pass pointer to pt_regs as second arg
-	;;
-	srlz.d			// make sure we see the effect of cr.ivr
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.call.sptk.many b6=ia64_handle_irq
+	/* interrupt handler has become too big to fit this area. */
+	br.sptk.many __interrupt
 END(interrupt)
 
 	.org ia64_ivt+0x3400
@@ -978,6 +939,7 @@ END(interrupt)
 	 *	- ar.fpsr: set to kernel settings
 	 *	-  b6: preserved (same as on entry)
 	 */
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 GLOBAL_ENTRY(ia64_syscall_setup)
 #if PT(B6) != 0
 # error This code assumes that b6 is the first field in pt_regs.
@@ -1069,6 +1031,7 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 (p10)	mov r8=-EINVAL
 	br.ret.sptk.many b7
 END(ia64_syscall_setup)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
 
 	.org ia64_ivt+0x3c00
 /////////////////////////////////////////////////////////////////////////////////////////
@@ -1082,7 +1045,7 @@ END(ia64_syscall_setup)
 	DBG_FAULT(16)
 	FAULT(16)
 
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(__IA64_ASM_PARAVIRTUALIZED_NATIVE)
 	/*
 	 * There is no particular reason for this code to be here, other than
 	 * that there happens to be space here that would go unused otherwise.
@@ -1092,7 +1055,7 @@ END(ia64_syscall_setup)
 	 * account_sys_enter is called from SAVE_MIN* macros if accounting is
 	 * enabled and if the macro is entered from user mode.
 	 */
-ENTRY(account_sys_enter)
+GLOBAL_ENTRY(account_sys_enter)
 	// mov.m r20=ar.itc is called in advance, and r13 is current
 	add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13
 	add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13
@@ -1123,110 +1086,18 @@ END(account_sys_enter)
 	DBG_FAULT(17)
 	FAULT(17)
 
-ENTRY(non_syscall)
-	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
-	;;
-	SAVE_MIN_WITH_COVER
-
-	// There is no particular reason for this code to be here, other than that
-	// there happens to be space here that would go unused otherwise.  If this
-	// fault ever gets "unreserved", simply moved the following code to a more
-	// suitable spot...
-
-	alloc r14=ar.pfs,0,0,2,0
-	mov out0=cr.iim
-	add out1=16,sp
-	adds r3=8,r2			// set up second base pointer for SAVE_REST
-
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i				// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i			// restore psr.i
-	movl r15=ia64_leave_kernel
-	;;
-	SAVE_REST
-	mov rp=r15
-	;;
-	br.call.sptk.many b6=ia64_bad_break	// avoid WAW on CFM and ignore return addr
-END(non_syscall)
-
 	.org ia64_ivt+0x4800
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4800 Entry 18 (size 64 bundles) Reserved
 	DBG_FAULT(18)
 	FAULT(18)
 
-	/*
-	 * There is no particular reason for this code to be here, other than that
-	 * there happens to be space here that would go unused otherwise.  If this
-	 * fault ever gets "unreserved", simply moved the following code to a more
-	 * suitable spot...
-	 */
-
-ENTRY(dispatch_unaligned_handler)
-	SAVE_MIN_WITH_COVER
-	;;
-	alloc r14=ar.pfs,0,0,2,0		// now it's safe (must be first in insn group!)
-	mov out0=cr.ifa
-	adds out1=16,sp
-
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	adds r3=8,r2				// set up second base pointer
-	;;
-	SAVE_REST
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.sptk.many ia64_prepare_handle_unaligned
-END(dispatch_unaligned_handler)
-
 	.org ia64_ivt+0x4c00
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4c00 Entry 19 (size 64 bundles) Reserved
 	DBG_FAULT(19)
 	FAULT(19)
 
-	/*
-	 * There is no particular reason for this code to be here, other than that
-	 * there happens to be space here that would go unused otherwise.  If this
-	 * fault ever gets "unreserved", simply moved the following code to a more
-	 * suitable spot...
-	 */
-
-ENTRY(dispatch_to_fault_handler)
-	/*
-	 * Input:
-	 *	psr.ic:	off
-	 *	r19:	fault vector number (e.g., 24 for General Exception)
-	 *	r31:	contains saved predicates (pr)
-	 */
-	SAVE_MIN_WITH_COVER_R19
-	alloc r14=ar.pfs,0,0,5,0
-	mov out0=r15
-	mov out1=cr.isr
-	mov out2=cr.ifa
-	mov out3=cr.iim
-	mov out4=cr.itir
-	;;
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	adds r3=8,r2				// set up second base pointer for SAVE_REST
-	;;
-	SAVE_REST
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.call.sptk.many b6=ia64_fault
-END(dispatch_to_fault_handler)
-
 //
 // --- End of long entries, Beginning of short entries
 //
@@ -1236,8 +1107,8 @@ END(dispatch_to_fault_handler)
 // 0x5000 Entry 20 (size 16 bundles) Page Not Present (10,22,49)
 ENTRY(page_not_present)
 	DBG_FAULT(20)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	/*
 	 * The Linux page fault handler doesn't expect non-present pages to be in
 	 * the TLB.  Flush the existing entry now, so we meet that expectation.
@@ -1256,8 +1127,8 @@ END(page_not_present)
 // 0x5100 Entry 21 (size 16 bundles) Key Permission (13,25,52)
 ENTRY(key_permission)
 	DBG_FAULT(21)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1269,8 +1140,8 @@ END(key_permission)
 // 0x5200 Entry 22 (size 16 bundles) Instruction Access Rights (26)
 ENTRY(iaccess_rights)
 	DBG_FAULT(22)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1282,8 +1153,8 @@ END(iaccess_rights)
 // 0x5300 Entry 23 (size 16 bundles) Data Access Rights (14,53)
 ENTRY(daccess_rights)
 	DBG_FAULT(23)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1295,7 +1166,7 @@ END(daccess_rights)
 // 0x5400 Entry 24 (size 16 bundles) General Exception (5,32,34,36,38,39)
 ENTRY(general_exception)
 	DBG_FAULT(24)
-	mov r16=cr.isr
+	MOV_FROM_ISR(r16)
 	mov r31=pr
 	;;
 	cmp4.eq p6,p0=0,r16
@@ -1324,8 +1195,8 @@ END(disabled_fp_reg)
 ENTRY(nat_consumption)
 	DBG_FAULT(26)
 
-	mov r16=cr.ipsr
-	mov r17=cr.isr
+	MOV_FROM_IPSR(p0, r16)
+	MOV_FROM_ISR(r17)
 	mov r31=pr				// save PR
 	;;
 	and r18=0xf,r17				// r18 = cr.ipsr.code{3:0}
@@ -1335,10 +1206,10 @@ ENTRY(nat_consumption)
 	dep r16=-1,r16,IA64_PSR_ED_BIT,1
 (p6)	br.cond.spnt 1f		// branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH)
 	;;
-	mov cr.ipsr=r16		// set cr.ipsr.na
+	MOV_TO_IPSR(p0, r16, r18)
 	mov pr=r31,-1
 	;;
-	rfi
+	RFI
 
 1:	mov pr=r31,-1
 	;;
@@ -1360,26 +1231,26 @@ ENTRY(speculation_vector)
 	 *
 	 * cr.imm contains zero_ext(imm21)
 	 */
-	mov r18=cr.iim
+	MOV_FROM_IIM(r18)
 	;;
-	mov r17=cr.iip
+	MOV_FROM_IIP(r17)
 	shl r18=r18,43			// put sign bit in position (43=64-21)
 	;;
 
-	mov r16=cr.ipsr
+	MOV_FROM_IPSR(p0, r16)
 	shr r18=r18,39			// sign extend (39=43-4)
 	;;
 
 	add r17=r17,r18			// now add the offset
 	;;
-	mov cr.iip=r17
+	MOV_TO_IIP(r17, r19)
 	dep r16=0,r16,41,2		// clear EI
 	;;
 
-	mov cr.ipsr=r16
+	MOV_TO_IPSR(p0, r16, r19)
 	;;
 
-	rfi				// and go back
+	RFI
 END(speculation_vector)
 
 	.org ia64_ivt+0x5800
@@ -1517,11 +1388,11 @@ ENTRY(ia32_intercept)
 	DBG_FAULT(46)
 #ifdef	CONFIG_IA32_SUPPORT
 	mov r31=pr
-	mov r16=cr.isr
+	MOV_FROM_ISR(r16)
 	;;
 	extr.u r17=r16,16,8	// get ISR.code
 	mov r18=ar.eflag
-	mov r19=cr.iim		// old eflag value
+	MOV_FROM_IIM(r19)	// old eflag value
 	;;
 	cmp.ne p6,p0=2,r17
 (p6)	br.cond.spnt 1f		// not a system flag fault
@@ -1533,7 +1404,7 @@ ENTRY(ia32_intercept)
 (p6)	br.cond.spnt 1f		// eflags.ac bit didn't change
 	;;
 	mov pr=r31,-1		// restore predicate registers
-	rfi
+	RFI
 
 1:
 #endif	// CONFIG_IA32_SUPPORT
@@ -1673,6 +1544,137 @@ END(ia32_interrupt)
 	DBG_FAULT(67)
 	FAULT(67)
 
+	//-----------------------------------------------------------------------------------
+	// call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
+ENTRY(page_fault)
+	SSM_PSR_DT_AND_SRLZ_I
+	;;
+	SAVE_MIN_WITH_COVER
+	alloc r15=ar.pfs,0,0,3,0
+	MOV_FROM_IFA(out0)
+	MOV_FROM_ISR(out1)
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r14, r3)
+	adds r3=8,r2				// set up second base pointer
+	SSM_PSR_I(p15, p15, r14)		// restore psr.i
+	movl r14=ia64_leave_kernel
+	;;
+	SAVE_REST
+	mov rp=r14
+	;;
+	adds out2=16,r12			// out2 = pointer to pt_regs
+	br.call.sptk.many b6=ia64_do_page_fault	// ignore return address
+END(page_fault)
+
+ENTRY(non_syscall)
+	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
+	;;
+	SAVE_MIN_WITH_COVER
+
+	// There is no particular reason for this code to be here, other than that
+	// there happens to be space here that would go unused otherwise.  If this
+	// fault ever gets "unreserved", simply moved the following code to a more
+	// suitable spot...
+
+	alloc r14=ar.pfs,0,0,2,0
+	MOV_FROM_IIM(out0)
+	add out1=16,sp
+	adds r3=8,r2			// set up second base pointer for SAVE_REST
+
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r15, r24)
+					// guarantee that interruption collection is on
+	SSM_PSR_I(p15, p15, r15)	// restore psr.i
+	movl r15=ia64_leave_kernel
+	;;
+	SAVE_REST
+	mov rp=r15
+	;;
+	br.call.sptk.many b6=ia64_bad_break	// avoid WAW on CFM and ignore return addr
+END(non_syscall)
+
+ENTRY(__interrupt)
+	DBG_FAULT(12)
+	mov r31=pr		// prepare to save predicates
+	;;
+	SAVE_MIN_WITH_COVER	// uses r31; defines r2 and r3
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r14)
+				// ensure everybody knows psr.ic is back on
+	adds r3=8,r2		// set up second base pointer for SAVE_REST
+	;;
+	SAVE_REST
+	;;
+	MCA_RECOVER_RANGE(interrupt)
+	alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
+	MOV_FROM_IVR(out0, r8)	// pass cr.ivr as first arg
+	add out1=16,sp		// pass pointer to pt_regs as second arg
+	;;
+	srlz.d			// make sure we see the effect of cr.ivr
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.call.sptk.many b6=ia64_handle_irq
+END(__interrupt)
+
+	/*
+	 * There is no particular reason for this code to be here, other than that
+	 * there happens to be space here that would go unused otherwise.  If this
+	 * fault ever gets "unreserved", simply moved the following code to a more
+	 * suitable spot...
+	 */
+
+ENTRY(dispatch_unaligned_handler)
+	SAVE_MIN_WITH_COVER
+	;;
+	alloc r14=ar.pfs,0,0,2,0		// now it's safe (must be first in insn group!)
+	MOV_FROM_IFA(out0)
+	adds out1=16,sp
+
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+						// guarantee that interruption collection is on
+	SSM_PSR_I(p15, p15, r3)			// restore psr.i
+	adds r3=8,r2				// set up second base pointer
+	;;
+	SAVE_REST
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.sptk.many ia64_prepare_handle_unaligned
+END(dispatch_unaligned_handler)
+
+	/*
+	 * There is no particular reason for this code to be here, other than that
+	 * there happens to be space here that would go unused otherwise.  If this
+	 * fault ever gets "unreserved", simply moved the following code to a more
+	 * suitable spot...
+	 */
+
+ENTRY(dispatch_to_fault_handler)
+	/*
+	 * Input:
+	 *	psr.ic:	off
+	 *	r19:	fault vector number (e.g., 24 for General Exception)
+	 *	r31:	contains saved predicates (pr)
+	 */
+	SAVE_MIN_WITH_COVER_R19
+	alloc r14=ar.pfs,0,0,5,0
+	MOV_FROM_ISR(out1)
+	MOV_FROM_IFA(out2)
+	MOV_FROM_IIM(out3)
+	MOV_FROM_ITIR(out4)
+	;;
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, out0)
+						// guarantee that interruption collection is on
+	mov out0=r15
+	;;
+	SSM_PSR_I(p15, p15, r3)			// restore psr.i
+	adds r3=8,r2				// set up second base pointer for SAVE_REST
+	;;
+	SAVE_REST
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.call.sptk.many b6=ia64_fault
+END(dispatch_to_fault_handler)
+
 	/*
 	 * Squatting in this space ...
 	 *
@@ -1686,11 +1688,10 @@ ENTRY(dispatch_illegal_op_fault)
 	.prologue
 	.body
 	SAVE_MIN_WITH_COVER
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i		// guarantee that interruption collection is on
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+				// guarantee that interruption collection is on
 	;;
-(p15)	ssm psr.i	// restore psr.i
+	SSM_PSR_I(p15, p15, r3)	// restore psr.i
 	adds r3=8,r2	// set up second base pointer for SAVE_REST
 	;;
 	alloc r14=ar.pfs,0,0,1,0	// must be first in insn group
@@ -1729,12 +1730,11 @@ END(dispatch_illegal_op_fault)
 ENTRY(dispatch_to_ia32_handler)
 	SAVE_MIN
 	;;
-	mov r14=cr.isr
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
+	MOV_FROM_ISR(r14)
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+				// guarantee that interruption collection is on
 	;;
-(p15)	ssm psr.i
+	SSM_PSR_I(p15, p15, r3)
 	adds r3=8,r2		// Base pointer for SAVE_REST
 	;;
 	SAVE_REST
diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S
index 621630256c4..f69389c7be1 100644
--- a/arch/ia64/kernel/jprobes.S
+++ b/arch/ia64/kernel/jprobes.S
@@ -45,7 +45,7 @@
  * to the correct location.
  */
 #include <asm/asmmacro.h>
-#include <asm-ia64/break.h>
+#include <asm/break.h>
 
 	/*
 	 * void jprobe_break(void)
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 233434f4f88..f07688da947 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -429,8 +429,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 		((struct fnptr *)kretprobe_trampoline)->ip;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -485,7 +484,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
@@ -500,7 +499,6 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	return 1;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 74b6d670aae..292e214a3b8 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -2,6 +2,7 @@
 #include <asm/cache.h>
 
 #include "entry.h"
+#include "paravirt_inst.h"
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 /* read ar.itc in advance, and use it before leaving bank 0 */
@@ -43,16 +44,16 @@
  * Note that psr.ic is NOT turned on by this macro.  This is so that
  * we can pass interruption state as arguments to a handler.
  */
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND)						\
+#define IA64_NATIVE_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND)				\
 	mov r16=IA64_KR(CURRENT);	/* M */							\
 	mov r27=ar.rsc;			/* M */							\
 	mov r20=r1;			/* A */							\
 	mov r25=ar.unat;		/* M */							\
-	mov r29=cr.ipsr;		/* M */							\
+	MOV_FROM_IPSR(p0,r29);		/* M */							\
 	mov r26=ar.pfs;			/* I */							\
-	mov r28=cr.iip;			/* M */							\
+	MOV_FROM_IIP(r28);			/* M */						\
 	mov r21=ar.fpsr;		/* M */							\
-	COVER;				/* B;; (or nothing) */					\
+	__COVER;				/* B;; (or nothing) */				\
 	;;											\
 	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16;						\
 	;;											\
@@ -244,6 +245,6 @@
 1:						\
 	.pred.rel "mutex", pKStk, pUStk
 
-#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
-#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(COVER, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(COVER, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
 #define SAVE_MIN			DO_SAVE_MIN(     , mov r30=r0, , )
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index e83e2ea3b3e..aaa7d901521 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -135,15 +135,6 @@ static const char *reloc_name[256] = {
 
 #undef N
 
-struct got_entry {
-	uint64_t val;
-};
-
-struct fdesc {
-	uint64_t ip;
-	uint64_t gp;
-};
-
 /* Opaque struct for insns, to protect against derefs. */
 struct insn;
 
@@ -321,7 +312,8 @@ module_alloc (unsigned long size)
 void
 module_free (struct module *mod, void *module_region)
 {
-	if (mod->arch.init_unw_table && module_region == mod->module_init) {
+	if (mod && mod->arch.init_unw_table &&
+	    module_region == mod->module_init) {
 		unw_remove_unwind_table(mod->arch.init_unw_table);
 		mod->arch.init_unw_table = NULL;
 	}
diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c
new file mode 100644
index 00000000000..8273afc32db
--- /dev/null
+++ b/arch/ia64/kernel/nr-irqs.c
@@ -0,0 +1,24 @@
+/*
+ * calculate
+ * NR_IRQS = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, FOO_NR_IRQS...)
+ * depending on config.
+ * This must be calculated before processing asm-offset.c.
+ */
+
+#define ASM_OFFSETS_C 1
+
+#include <linux/kbuild.h>
+#include <linux/threads.h>
+#include <asm/native/irq.h>
+
+void foo(void)
+{
+	union paravirt_nr_irqs_max {
+		char ia64_native_nr_irqs[IA64_NATIVE_NR_IRQS];
+#ifdef CONFIG_XEN
+		char xen_nr_irqs[XEN_NR_IRQS];
+#endif
+	};
+
+	DEFINE(NR_IRQS, sizeof (union paravirt_nr_irqs_max));
+}
diff --git a/arch/ia64/kernel/paravirt.c b/arch/ia64/kernel/paravirt.c
new file mode 100644
index 00000000000..afaf5b9a2cf
--- /dev/null
+++ b/arch/ia64/kernel/paravirt.c
@@ -0,0 +1,369 @@
+/******************************************************************************
+ * arch/ia64/kernel/paravirt.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *     Yaozu (Eddie) Dong <eddie.dong@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/iosapic.h>
+#include <asm/paravirt.h>
+
+/***************************************************************************
+ * general info
+ */
+struct pv_info pv_info = {
+	.kernel_rpl = 0,
+	.paravirt_enabled = 0,
+	.name = "bare hardware"
+};
+
+/***************************************************************************
+ * pv_init_ops
+ * initialization hooks.
+ */
+
+struct pv_init_ops pv_init_ops;
+
+/***************************************************************************
+ * pv_cpu_ops
+ * intrinsics hooks.
+ */
+
+/* ia64_native_xxx are macros so that we have to make them real functions */
+
+#define DEFINE_VOID_FUNC1(name)					\
+	static void						\
+	ia64_native_ ## name ## _func(unsigned long arg)	\
+	{							\
+		ia64_native_ ## name(arg);			\
+	}							\
+
+#define DEFINE_VOID_FUNC2(name)					\
+	static void						\
+	ia64_native_ ## name ## _func(unsigned long arg0,	\
+				      unsigned long arg1)	\
+	{							\
+		ia64_native_ ## name(arg0, arg1);		\
+	}							\
+
+#define DEFINE_FUNC0(name)			\
+	static unsigned long			\
+	ia64_native_ ## name ## _func(void)	\
+	{					\
+		return ia64_native_ ## name();	\
+	}
+
+#define DEFINE_FUNC1(name, type)			\
+	static unsigned long				\
+	ia64_native_ ## name ## _func(type arg)		\
+	{						\
+		return ia64_native_ ## name(arg);	\
+	}						\
+
+DEFINE_VOID_FUNC1(fc);
+DEFINE_VOID_FUNC1(intrin_local_irq_restore);
+
+DEFINE_VOID_FUNC2(ptcga);
+DEFINE_VOID_FUNC2(set_rr);
+
+DEFINE_FUNC0(get_psr_i);
+
+DEFINE_FUNC1(thash, unsigned long);
+DEFINE_FUNC1(get_cpuid, int);
+DEFINE_FUNC1(get_pmd, int);
+DEFINE_FUNC1(get_rr, unsigned long);
+
+static void
+ia64_native_ssm_i_func(void)
+{
+	ia64_native_ssm(IA64_PSR_I);
+}
+
+static void
+ia64_native_rsm_i_func(void)
+{
+	ia64_native_rsm(IA64_PSR_I);
+}
+
+static void
+ia64_native_set_rr0_to_rr4_func(unsigned long val0, unsigned long val1,
+				unsigned long val2, unsigned long val3,
+				unsigned long val4)
+{
+	ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4);
+}
+
+#define CASE_GET_REG(id)				\
+	case _IA64_REG_ ## id:				\
+	res = ia64_native_getreg(_IA64_REG_ ## id);	\
+	break;
+#define CASE_GET_AR(id) CASE_GET_REG(AR_ ## id)
+#define CASE_GET_CR(id) CASE_GET_REG(CR_ ## id)
+
+unsigned long
+ia64_native_getreg_func(int regnum)
+{
+	unsigned long res = -1;
+	switch (regnum) {
+	CASE_GET_REG(GP);
+	CASE_GET_REG(IP);
+	CASE_GET_REG(PSR);
+	CASE_GET_REG(TP);
+	CASE_GET_REG(SP);
+
+	CASE_GET_AR(KR0);
+	CASE_GET_AR(KR1);
+	CASE_GET_AR(KR2);
+	CASE_GET_AR(KR3);
+	CASE_GET_AR(KR4);
+	CASE_GET_AR(KR5);
+	CASE_GET_AR(KR6);
+	CASE_GET_AR(KR7);
+	CASE_GET_AR(RSC);
+	CASE_GET_AR(BSP);
+	CASE_GET_AR(BSPSTORE);
+	CASE_GET_AR(RNAT);
+	CASE_GET_AR(FCR);
+	CASE_GET_AR(EFLAG);
+	CASE_GET_AR(CSD);
+	CASE_GET_AR(SSD);
+	CASE_GET_AR(CFLAG);
+	CASE_GET_AR(FSR);
+	CASE_GET_AR(FIR);
+	CASE_GET_AR(FDR);
+	CASE_GET_AR(CCV);
+	CASE_GET_AR(UNAT);
+	CASE_GET_AR(FPSR);
+	CASE_GET_AR(ITC);
+	CASE_GET_AR(PFS);
+	CASE_GET_AR(LC);
+	CASE_GET_AR(EC);
+
+	CASE_GET_CR(DCR);
+	CASE_GET_CR(ITM);
+	CASE_GET_CR(IVA);
+	CASE_GET_CR(PTA);
+	CASE_GET_CR(IPSR);
+	CASE_GET_CR(ISR);
+	CASE_GET_CR(IIP);
+	CASE_GET_CR(IFA);
+	CASE_GET_CR(ITIR);
+	CASE_GET_CR(IIPA);
+	CASE_GET_CR(IFS);
+	CASE_GET_CR(IIM);
+	CASE_GET_CR(IHA);
+	CASE_GET_CR(LID);
+	CASE_GET_CR(IVR);
+	CASE_GET_CR(TPR);
+	CASE_GET_CR(EOI);
+	CASE_GET_CR(IRR0);
+	CASE_GET_CR(IRR1);
+	CASE_GET_CR(IRR2);
+	CASE_GET_CR(IRR3);
+	CASE_GET_CR(ITV);
+	CASE_GET_CR(PMV);
+	CASE_GET_CR(CMCV);
+	CASE_GET_CR(LRR0);
+	CASE_GET_CR(LRR1);
+
+	default:
+		printk(KERN_CRIT "wrong_getreg %d\n", regnum);
+		break;
+	}
+	return res;
+}
+
+#define CASE_SET_REG(id)				\
+	case _IA64_REG_ ## id:				\
+	ia64_native_setreg(_IA64_REG_ ## id, val);	\
+	break;
+#define CASE_SET_AR(id) CASE_SET_REG(AR_ ## id)
+#define CASE_SET_CR(id) CASE_SET_REG(CR_ ## id)
+
+void
+ia64_native_setreg_func(int regnum, unsigned long val)
+{
+	switch (regnum) {
+	case _IA64_REG_PSR_L:
+		ia64_native_setreg(_IA64_REG_PSR_L, val);
+		ia64_dv_serialize_data();
+		break;
+	CASE_SET_REG(SP);
+	CASE_SET_REG(GP);
+
+	CASE_SET_AR(KR0);
+	CASE_SET_AR(KR1);
+	CASE_SET_AR(KR2);
+	CASE_SET_AR(KR3);
+	CASE_SET_AR(KR4);
+	CASE_SET_AR(KR5);
+	CASE_SET_AR(KR6);
+	CASE_SET_AR(KR7);
+	CASE_SET_AR(RSC);
+	CASE_SET_AR(BSP);
+	CASE_SET_AR(BSPSTORE);
+	CASE_SET_AR(RNAT);
+	CASE_SET_AR(FCR);
+	CASE_SET_AR(EFLAG);
+	CASE_SET_AR(CSD);
+	CASE_SET_AR(SSD);
+	CASE_SET_AR(CFLAG);
+	CASE_SET_AR(FSR);
+	CASE_SET_AR(FIR);
+	CASE_SET_AR(FDR);
+	CASE_SET_AR(CCV);
+	CASE_SET_AR(UNAT);
+	CASE_SET_AR(FPSR);
+	CASE_SET_AR(ITC);
+	CASE_SET_AR(PFS);
+	CASE_SET_AR(LC);
+	CASE_SET_AR(EC);
+
+	CASE_SET_CR(DCR);
+	CASE_SET_CR(ITM);
+	CASE_SET_CR(IVA);
+	CASE_SET_CR(PTA);
+	CASE_SET_CR(IPSR);
+	CASE_SET_CR(ISR);
+	CASE_SET_CR(IIP);
+	CASE_SET_CR(IFA);
+	CASE_SET_CR(ITIR);
+	CASE_SET_CR(IIPA);
+	CASE_SET_CR(IFS);
+	CASE_SET_CR(IIM);
+	CASE_SET_CR(IHA);
+	CASE_SET_CR(LID);
+	CASE_SET_CR(IVR);
+	CASE_SET_CR(TPR);
+	CASE_SET_CR(EOI);
+	CASE_SET_CR(IRR0);
+	CASE_SET_CR(IRR1);
+	CASE_SET_CR(IRR2);
+	CASE_SET_CR(IRR3);
+	CASE_SET_CR(ITV);
+	CASE_SET_CR(PMV);
+	CASE_SET_CR(CMCV);
+	CASE_SET_CR(LRR0);
+	CASE_SET_CR(LRR1);
+	default:
+		printk(KERN_CRIT "wrong setreg %d\n", regnum);
+		break;
+	}
+}
+
+struct pv_cpu_ops pv_cpu_ops = {
+	.fc		= ia64_native_fc_func,
+	.thash		= ia64_native_thash_func,
+	.get_cpuid	= ia64_native_get_cpuid_func,
+	.get_pmd	= ia64_native_get_pmd_func,
+	.ptcga		= ia64_native_ptcga_func,
+	.get_rr		= ia64_native_get_rr_func,
+	.set_rr		= ia64_native_set_rr_func,
+	.set_rr0_to_rr4	= ia64_native_set_rr0_to_rr4_func,
+	.ssm_i		= ia64_native_ssm_i_func,
+	.getreg		= ia64_native_getreg_func,
+	.setreg		= ia64_native_setreg_func,
+	.rsm_i		= ia64_native_rsm_i_func,
+	.get_psr_i	= ia64_native_get_psr_i_func,
+	.intrin_local_irq_restore
+			= ia64_native_intrin_local_irq_restore_func,
+};
+EXPORT_SYMBOL(pv_cpu_ops);
+
+/******************************************************************************
+ * replacement of hand written assembly codes.
+ */
+
+void
+paravirt_cpu_asm_init(const struct pv_cpu_asm_switch *cpu_asm_switch)
+{
+	extern unsigned long paravirt_switch_to_targ;
+	extern unsigned long paravirt_leave_syscall_targ;
+	extern unsigned long paravirt_work_processed_syscall_targ;
+	extern unsigned long paravirt_leave_kernel_targ;
+
+	paravirt_switch_to_targ = cpu_asm_switch->switch_to;
+	paravirt_leave_syscall_targ = cpu_asm_switch->leave_syscall;
+	paravirt_work_processed_syscall_targ =
+		cpu_asm_switch->work_processed_syscall;
+	paravirt_leave_kernel_targ = cpu_asm_switch->leave_kernel;
+}
+
+/***************************************************************************
+ * pv_iosapic_ops
+ * iosapic read/write hooks.
+ */
+
+static unsigned int
+ia64_native_iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	return __ia64_native_iosapic_read(iosapic, reg);
+}
+
+static void
+ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	__ia64_native_iosapic_write(iosapic, reg, val);
+}
+
+struct pv_iosapic_ops pv_iosapic_ops = {
+	.pcat_compat_init = ia64_native_iosapic_pcat_compat_init,
+	.get_irq_chip = ia64_native_iosapic_get_irq_chip,
+
+	.__read = ia64_native_iosapic_read,
+	.__write = ia64_native_iosapic_write,
+};
+
+/***************************************************************************
+ * pv_irq_ops
+ * irq operations
+ */
+
+struct pv_irq_ops pv_irq_ops = {
+	.register_ipi = ia64_native_register_ipi,
+
+	.assign_irq_vector = ia64_native_assign_irq_vector,
+	.free_irq_vector = ia64_native_free_irq_vector,
+	.register_percpu_irq = ia64_native_register_percpu_irq,
+
+	.resend_irq = ia64_native_resend_irq,
+};
+
+/***************************************************************************
+ * pv_time_ops
+ * time operations
+ */
+
+static int
+ia64_native_do_steal_accounting(unsigned long *new_itm)
+{
+	return 0;
+}
+
+struct pv_time_ops pv_time_ops = {
+	.do_steal_accounting = ia64_native_do_steal_accounting,
+};
diff --git a/arch/ia64/kernel/paravirt_inst.h b/arch/ia64/kernel/paravirt_inst.h
new file mode 100644
index 00000000000..5cad6fb2ed1
--- /dev/null
+++ b/arch/ia64/kernel/paravirt_inst.h
@@ -0,0 +1,29 @@
+/******************************************************************************
+ * linux/arch/ia64/xen/paravirt_inst.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifdef __IA64_ASM_PARAVIRTUALIZED_XEN
+#include <asm/xen/inst.h>
+#include <asm/xen/minstate.h>
+#else
+#include <asm/native/inst.h>
+#endif
+
diff --git a/arch/ia64/kernel/paravirtentry.S b/arch/ia64/kernel/paravirtentry.S
new file mode 100644
index 00000000000..2f42fcb9776
--- /dev/null
+++ b/arch/ia64/kernel/paravirtentry.S
@@ -0,0 +1,60 @@
+/******************************************************************************
+ * linux/arch/ia64/xen/paravirtentry.S
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/asm-offsets.h>
+#include "entry.h"
+
+#define DATA8(sym, init_value)			\
+	.pushsection .data.read_mostly ;	\
+	.align 8 ;				\
+	.global sym ;				\
+	sym: ;					\
+	data8 init_value ;			\
+	.popsection
+
+#define BRANCH(targ, reg, breg)		\
+	movl reg=targ ;			\
+	;;				\
+	ld8 reg=[reg] ;			\
+	;;				\
+	mov breg=reg ;			\
+	br.cond.sptk.many breg
+
+#define BRANCH_PROC(sym, reg, breg)				\
+	DATA8(paravirt_ ## sym ## _targ, ia64_native_ ## sym) ; \
+	GLOBAL_ENTRY(paravirt_ ## sym) ;			\
+		BRANCH(paravirt_ ## sym ## _targ, reg, breg) ;	\
+	END(paravirt_ ## sym)
+
+#define BRANCH_PROC_UNWINFO(sym, reg, breg)			\
+	DATA8(paravirt_ ## sym ## _targ, ia64_native_ ## sym) ; \
+	GLOBAL_ENTRY(paravirt_ ## sym) ;			\
+		PT_REGS_UNWIND_INFO(0) ;			\
+		BRANCH(paravirt_ ## sym ## _targ, reg, breg) ;	\
+	END(paravirt_ ## sym)
+
+
+BRANCH_PROC(switch_to, r22, b7)
+BRANCH_PROC_UNWINFO(leave_syscall, r22, b7)
+BRANCH_PROC(work_processed_syscall, r2, b7)
+BRANCH_PROC_UNWINFO(leave_kernel, r22, b7)
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 19d4493c619..fc8f3509df2 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2626,7 +2626,7 @@ pfm_task_incompatible(pfm_context_t *ctx, struct task_struct *task)
 	/*
 	 * make sure the task is off any CPU
 	 */
-	wait_task_inactive(task);
+	wait_task_inactive(task, 0);
 
 	/* more to come... */
 
@@ -4774,7 +4774,7 @@ recheck:
 
 		UNPROTECT_CTX(ctx, flags);
 
-		wait_task_inactive(task);
+		wait_task_inactive(task, 0);
 
 		PROTECT_CTX(ctx, flags);
 
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 632cda8f2e7..de636b21567 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -51,6 +51,7 @@
 #include <asm/mca.h>
 #include <asm/meminit.h>
 #include <asm/page.h>
+#include <asm/paravirt.h>
 #include <asm/patch.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -313,7 +314,7 @@ static inline void __init setup_crashkernel(unsigned long total, int *n)
  *
  * Setup the reserved memory areas set aside for the boot parameters,
  * initrd, etc.  There are currently %IA64_MAX_RSVD_REGIONS defined,
- * see include/asm-ia64/meminit.h if you need to define more.
+ * see arch/ia64/include/asm/meminit.h if you need to define more.
  */
 void __init
 reserve_memory (void)
@@ -341,6 +342,8 @@ reserve_memory (void)
 	rsvd_region[n].end   = (unsigned long) ia64_imva(_end);
 	n++;
 
+	n += paravirt_reserve_memory(&rsvd_region[n]);
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (ia64_boot_param->initrd_start) {
 		rsvd_region[n].start = (unsigned long)__va(ia64_boot_param->initrd_start);
@@ -519,6 +522,8 @@ setup_arch (char **cmdline_p)
 {
 	unw_init();
 
+	paravirt_arch_setup_early();
+
 	ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
 
 	*cmdline_p = __va(ia64_boot_param->command_line);
@@ -583,6 +588,9 @@ setup_arch (char **cmdline_p)
 	acpi_boot_init();
 #endif
 
+	paravirt_banner();
+	paravirt_arch_setup_console(cmdline_p);
+
 #ifdef CONFIG_VT
 	if (!conswitchp) {
 # if defined(CONFIG_DUMMY_CONSOLE)
@@ -602,11 +610,15 @@ setup_arch (char **cmdline_p)
 #endif
 
 	/* enable IA-64 Machine Check Abort Handling unless disabled */
+	if (paravirt_arch_setup_nomca())
+		nomca = 1;
 	if (!nomca)
 		ia64_mca_init();
 
 	platform_setup(cmdline_p);
+#ifndef CONFIG_IA64_HP_SIM
 	check_sal_cache_flush();
+#endif
 	paging_init();
 }
 
@@ -917,17 +929,19 @@ cpu_init (void)
 	if (smp_processor_id() == 0) {
 		cpu_set(0, per_cpu(cpu_sibling_map, 0));
 		cpu_set(0, cpu_core_map[0]);
+	} else {
+		/*
+		 * Set ar.k3 so that assembly code in MCA handler can compute
+		 * physical addresses of per cpu variables with a simple:
+		 *   phys = ar.k3 + &per_cpu_var
+		 * and the alt-dtlb-miss handler can set per-cpu mapping into
+		 * the TLB when needed. head.S already did this for cpu0.
+		 */
+		ia64_set_kr(IA64_KR_PER_CPU_DATA,
+			    ia64_tpa(cpu_data) - (long) __per_cpu_start);
 	}
 #endif
 
-	/*
-	 * We set ar.k3 so that assembly code in MCA handler can compute
-	 * physical addresses of per cpu variables with a simple:
-	 *   phys = ar.k3 + &per_cpu_var
-	 */
-	ia64_set_kr(IA64_KR_PER_CPU_DATA,
-		    ia64_tpa(cpu_data) - (long) __per_cpu_start);
-
 	get_max_cacheline_size();
 
 	/*
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 3676468612b..da8f020d82c 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -58,7 +58,7 @@ static struct local_tlb_flush_counts {
 	unsigned int count;
 } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
 
-static DEFINE_PER_CPU(unsigned int, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
+static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
 
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
@@ -254,7 +254,7 @@ smp_local_flush_tlb(void)
 void
 smp_flush_tlb_cpumask(cpumask_t xcpumask)
 {
-	unsigned int *counts = __ia64_per_cpu_var(shadow_flush_counts);
+	unsigned short *counts = __ia64_per_cpu_var(shadow_flush_counts);
 	cpumask_t cpumask = xcpumask;
 	int mycpu, cpu, flush_mycpu = 0;
 
@@ -262,7 +262,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 	mycpu = smp_processor_id();
 
 	for_each_cpu_mask(cpu, cpumask)
-		counts[cpu] = local_tlb_flush_counts[cpu].count;
+		counts[cpu] = local_tlb_flush_counts[cpu].count & 0xffff;
 
 	mb();
 	for_each_cpu_mask(cpu, cpumask) {
@@ -276,7 +276,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 		smp_local_flush_tlb();
 
 	for_each_cpu_mask(cpu, cpumask)
-		while(counts[cpu] == local_tlb_flush_counts[cpu].count)
+		while(counts[cpu] == (local_tlb_flush_counts[cpu].count & 0xffff))
 			udelay(FLUSH_DELAY);
 
 	preempt_enable();
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 9d1d429c6c5..d8f05e504fb 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -50,6 +50,7 @@
 #include <asm/machvec.h>
 #include <asm/mca.h>
 #include <asm/page.h>
+#include <asm/paravirt.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -137,6 +138,7 @@ cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
 DEFINE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
 
@@ -466,7 +468,9 @@ start_secondary (void *unused)
 {
 	/* Early console may use I/O ports */
 	ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
+#ifndef CONFIG_PRINTK_TIME
 	Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
+#endif
 	efi_map_pal_code();
 	cpu_init();
 	preempt_disable();
@@ -642,6 +646,7 @@ void __devinit smp_prepare_boot_cpu(void)
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), cpu_callin_map);
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+	paravirt_post_smp_prepare_boot_cpu();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -736,16 +741,14 @@ int __cpu_disable(void)
 			return -EBUSY;
 	}
 
-	cpu_clear(cpu, cpu_online_map);
-
 	if (migrate_platform_irqs(cpu)) {
 		cpu_set(cpu, cpu_online_map);
 		return (-EBUSY);
 	}
 
 	remove_siblinginfo(cpu);
-	cpu_clear(cpu, cpu_online_map);
 	fixup_irqs();
+	cpu_clear(cpu, cpu_online_map);
 	local_flush_tlb_all();
 	cpu_clear(cpu, cpu_callin_map);
 	return 0;
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index 1eda194b955..bcbb6d8792d 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -160,7 +160,7 @@ sys_pipe (void)
 	int fd[2];
 	int retval;
 
-	retval = do_pipe(fd);
+	retval = do_pipe_flags(fd, 0);
 	if (retval)
 		goto out;
 	retval = fd[0];
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index aad1b7b1fff..65c10a42c88 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -24,6 +24,7 @@
 #include <asm/machvec.h>
 #include <asm/delay.h>
 #include <asm/hw_irq.h>
+#include <asm/paravirt.h>
 #include <asm/ptrace.h>
 #include <asm/sal.h>
 #include <asm/sections.h>
@@ -48,6 +49,15 @@ EXPORT_SYMBOL(last_cli_ip);
 
 #endif
 
+#ifdef CONFIG_PARAVIRT
+static void
+paravirt_clocksource_resume(void)
+{
+	if (pv_time_ops.clocksource_resume)
+		pv_time_ops.clocksource_resume();
+}
+#endif
+
 static struct clocksource clocksource_itc = {
 	.name           = "itc",
 	.rating         = 350,
@@ -56,6 +66,9 @@ static struct clocksource clocksource_itc = {
 	.mult           = 0, /*to be calculated*/
 	.shift          = 16,
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+#ifdef CONFIG_PARAVIRT
+	.resume		= paravirt_clocksource_resume,
+#endif
 };
 static struct clocksource *itc_clocksource;
 
@@ -157,6 +170,9 @@ timer_interrupt (int irq, void *dev_id)
 
 	profile_tick(CPU_PROFILING);
 
+	if (paravirt_do_steal_accounting(&new_itm))
+		goto skip_process_time_accounting;
+
 	while (1) {
 		update_process_times(user_mode(get_irq_regs()));
 
@@ -186,6 +202,8 @@ timer_interrupt (int irq, void *dev_id)
 		local_irq_disable();
 	}
 
+skip_process_time_accounting:
+
 	do {
 		/*
 		 * If we're too close to the next clock tick for
@@ -335,6 +353,11 @@ ia64_init_itm (void)
 		 */
 		clocksource_itc.rating = 50;
 
+	paravirt_init_missing_ticks_accounting(smp_processor_id());
+
+	/* avoid softlock up message when cpu is unplug and plugged again. */
+	touch_softlockup_watchdog();
+
 	/* Setup the CPU local timer tick */
 	ia64_cpu_local_tick();
 
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 5929ab10a28..de71da811cd 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -4,7 +4,6 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 
-#define LOAD_OFFSET	(KERNEL_START - KERNEL_TR_PAGE_SIZE)
 #include <asm-generic/vmlinux.lds.h>
 
 #define IVT_TEXT							\
@@ -216,6 +215,9 @@ SECTIONS
   /* Per-cpu data: */
   percpu : { } :percpu
   . = ALIGN(PERCPU_PAGE_SIZE);
+#ifdef	CONFIG_SMP
+  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
+#endif
   __phys_per_cpu_start = .;
   .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
 	{
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 112791dd254..bf22fb9e6dc 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -43,7 +43,8 @@ $(obj)/$(offsets-file): arch/ia64/kvm/asm-offsets.s
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+		coalesced_mmio.o)
 
 kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 68c978be9a5..cd0d1a7284b 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -38,6 +38,7 @@
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/tlb.h>
+#include <asm/elf.h>
 
 #include "misc.h"
 #include "vti.h"
@@ -61,12 +62,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
-
-struct fdesc{
-    unsigned long ip;
-    unsigned long gp;
-};
-
 static void kvm_flush_icache(unsigned long start, unsigned long len)
 {
 	int l;
@@ -125,9 +120,9 @@ void kvm_arch_hardware_enable(void *garbage)
 				PAGE_KERNEL));
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+	local_irq_restore(saved_psr);
 	if (slot < 0)
 		return;
-	local_irq_restore(saved_psr);
 
 	spin_lock(&vp_lock);
 	status = ia64_pal_vp_init_env(kvm_vsa_base ?
@@ -160,9 +155,9 @@ void kvm_arch_hardware_disable(void *garbage)
 
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+	local_irq_restore(saved_psr);
 	if (slot < 0)
 		return;
-	local_irq_restore(saved_psr);
 
 	status = ia64_pal_vp_exit_env(host_iva);
 	if (status)
@@ -187,6 +182,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	default:
 		r = 0;
 	}
@@ -195,11 +193,11 @@ int kvm_dev_ioctl_check_extension(long ext)
 }
 
 static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-					gpa_t addr)
+					gpa_t addr, int len, int is_write)
 {
 	struct kvm_io_device *dev;
 
-	dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr);
+	dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len, is_write);
 
 	return dev;
 }
@@ -231,7 +229,7 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	kvm_run->exit_reason = KVM_EXIT_MMIO;
 	return 0;
 mmio:
-	mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr, p->size, !p->dir);
 	if (mmio_dev) {
 		if (!p->dir)
 			kvm_iodevice_write(mmio_dev, p->addr, p->size,
@@ -1035,14 +1033,6 @@ static void kvm_free_vmm_area(void)
 	}
 }
 
-/*
- * Make sure that a cpu that is being hot-unplugged does not have any vcpus
- * cached on it. Leave it as blank for IA64.
- */
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 static void vti_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 }
@@ -1258,6 +1248,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 uninit:
 	kvm_vcpu_uninit(vcpu);
 fail:
+	local_irq_restore(psr);
 	return r;
 }
 
@@ -1460,6 +1451,9 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
 
 long kvm_arch_dev_ioctl(struct file *filp,
 		unsigned int ioctl, unsigned long arg)
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 798bf9835a5..e566ff43884 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -163,8 +163,14 @@ per_cpu_init (void)
 	 * get_zeroed_page().
 	 */
 	if (first_time) {
+		void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+
 		first_time=0;
-		for (cpu = 0; cpu < NR_CPUS; cpu++) {
+
+		__per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start;
+		per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0];
+
+		for (cpu = 1; cpu < NR_CPUS; cpu++) {
 			memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
 			__per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
 			cpu_data += PERCPU_PAGE_SIZE;
@@ -177,7 +183,7 @@ per_cpu_init (void)
 static inline void
 alloc_per_cpu_data(void)
 {
-	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
+	cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1,
 				   PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
 }
 #else
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 544dc420c65..78026aabaa7 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -36,7 +36,6 @@ struct early_node_data {
 	struct ia64_node_data *node_data;
 	unsigned long pernode_addr;
 	unsigned long pernode_size;
-	struct bootmem_data bootmem_data;
 	unsigned long num_physpages;
 #ifdef CONFIG_ZONE_DMA
 	unsigned long num_dma_physpages;
@@ -75,17 +74,17 @@ pg_data_t *pgdat_list[MAX_NUMNODES];
 static int __init build_node_maps(unsigned long start, unsigned long len,
 				  int node)
 {
-	unsigned long cstart, epfn, end = start + len;
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	unsigned long spfn, epfn, end = start + len;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
-	cstart = GRANULEROUNDDOWN(start);
+	spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
 
 	if (!bdp->node_low_pfn) {
-		bdp->node_boot_start = cstart;
+		bdp->node_min_pfn = spfn;
 		bdp->node_low_pfn = epfn;
 	} else {
-		bdp->node_boot_start = min(cstart, bdp->node_boot_start);
+		bdp->node_min_pfn = min(spfn, bdp->node_min_pfn);
 		bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
 	}
 
@@ -144,7 +143,11 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
 	int cpu;
 
 	for_each_possible_early_cpu(cpu) {
-		if (node == node_cpuid[cpu].nid) {
+		if (cpu == 0) {
+			void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+			__per_cpu_offset[cpu] = (char*)cpu0_data -
+				__per_cpu_start;
+		} else if (node == node_cpuid[cpu].nid) {
 			memcpy(__va(cpu_data), __phys_per_cpu_start,
 			       __per_cpu_end - __per_cpu_start);
 			__per_cpu_offset[cpu] = (char*)__va(cpu_data) -
@@ -167,7 +170,7 @@ static void __init fill_pernode(int node, unsigned long pernode,
 {
 	void *cpu_data;
 	int cpus = early_nr_cpus_node(node);
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	mem_data[node].pernode_addr = pernode;
 	mem_data[node].pernode_size = pernodesize;
@@ -222,20 +225,21 @@ static void __init fill_pernode(int node, unsigned long pernode,
 static int __init find_pernode_space(unsigned long start, unsigned long len,
 				     int node)
 {
-	unsigned long epfn;
+	unsigned long spfn, epfn;
 	unsigned long pernodesize = 0, pernode, pages, mapsize;
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
+	spfn = start >> PAGE_SHIFT;
 	epfn = (start + len) >> PAGE_SHIFT;
 
-	pages = bdp->node_low_pfn - (bdp->node_boot_start >> PAGE_SHIFT);
+	pages = bdp->node_low_pfn - bdp->node_min_pfn;
 	mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 
 	/*
 	 * Make sure this memory falls within this node's usable memory
 	 * since we may have thrown some away in build_maps().
 	 */
-	if (start < bdp->node_boot_start || epfn > bdp->node_low_pfn)
+	if (spfn < bdp->node_min_pfn || epfn > bdp->node_low_pfn)
 		return 0;
 
 	/* Don't setup this node's local space twice... */
@@ -297,7 +301,7 @@ static void __init reserve_pernode_space(void)
 		bdp = pdp->bdata;
 
 		/* First the bootmem_map itself */
-		pages = bdp->node_low_pfn - (bdp->node_boot_start>>PAGE_SHIFT);
+		pages = bdp->node_low_pfn - bdp->node_min_pfn;
 		size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 		base = __pa(bdp->node_bootmem_map);
 		reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
@@ -440,7 +444,7 @@ void __init find_memory(void)
 	efi_memmap_walk(find_max_min_low_pfn, NULL);
 
 	for_each_online_node(node)
-		if (mem_data[node].bootmem_data.node_low_pfn) {
+		if (bootmem_node_data[node].node_low_pfn) {
 			node_clear(node, memory_less_mask);
 			mem_data[node].min_pfn = ~0UL;
 		}
@@ -460,14 +464,14 @@ void __init find_memory(void)
 		else if (node_isset(node, memory_less_mask))
 			continue;
 
-		bdp = &mem_data[node].bootmem_data;
+		bdp = &bootmem_node_data[node];
 		pernode = mem_data[node].pernode_addr;
 		pernodesize = mem_data[node].pernode_size;
 		map = pernode + pernodesize;
 
 		init_bootmem_node(pgdat_list[node],
 				  map>>PAGE_SHIFT,
-				  bdp->node_boot_start>>PAGE_SHIFT,
+				  bdp->node_min_pfn,
 				  bdp->node_low_pfn);
 	}
 
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index d3ce8f3bcaa..b0f615759e9 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/log2.h>
@@ -21,10 +22,11 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
+unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT;
+EXPORT_SYMBOL(hpage_shift);
 
 pte_t *
-huge_pte_alloc (struct mm_struct *mm, unsigned long addr)
+huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
 	unsigned long taddr = htlbpage_to_page(addr);
 	pgd_t *pgd;
@@ -75,7 +77,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
  * Don't actually need to do any preparation, but need to make sure
  * the address is in the right region.
  */
-int prepare_hugepage_range(unsigned long addr, unsigned long len)
+int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
@@ -106,13 +109,19 @@ int pmd_huge(pmd_t pmd)
 {
 	return 0;
 }
+
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write)
 {
 	return NULL;
 }
 
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			unsigned long addr, unsigned long end,
 			unsigned long floor, unsigned long ceiling)
 {
@@ -149,7 +158,7 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, u
 
 	/* Handle MAP_FIXED */
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 77b15f80f10..7545037a862 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -324,7 +324,6 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 struct pci_bus * __devinit
 pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 {
-	struct pci_root_info info;
 	struct pci_controller *controller;
 	unsigned int windows = 0;
 	struct pci_bus *pbus;
@@ -346,22 +345,24 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
 			&windows);
 	if (windows) {
+		struct pci_root_info info;
+
 		controller->window =
 			kmalloc_node(sizeof(*controller->window) * windows,
 				     GFP_KERNEL, controller->node);
 		if (!controller->window)
 			goto out2;
-	}
 
-	name = kmalloc(16, GFP_KERNEL);
-	if (!name)
-		goto out3;
+		name = kmalloc(16, GFP_KERNEL);
+		if (!name)
+			goto out3;
 
-	sprintf(name, "PCI Bus %04x:%02x", domain, bus);
-	info.controller = controller;
-	info.name = name;
-	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
-			&info);
+		sprintf(name, "PCI Bus %04x:%02x", domain, bus);
+		info.controller = controller;
+		info.name = name;
+		acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+			add_window, &info);
+	}
 	/*
 	 * See arch/x86/pci/acpi.c.
 	 * The desired pci bus might already be scanned in a quirk. We
diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c
index ab7e2fd4079..c77ebdf9811 100644
--- a/arch/ia64/sn/kernel/iomv.c
+++ b/arch/ia64/sn/kernel/iomv.c
@@ -63,7 +63,7 @@ EXPORT_SYMBOL(sn_io_addr);
 /**
  * __sn_mmiowb - I/O space memory barrier
  *
- * See include/asm-ia64/io.h and Documentation/DocBook/deviceiobook.tmpl
+ * See arch/ia64/include/asm/io.h and Documentation/DocBook/deviceiobook.tmpl
  * for details.
  *
  * On SN2, we wait for the PIO_WRITE_STATUS SHub register to clear.
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 52175af299a..53ebb648449 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -350,7 +350,7 @@ void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL(sn_dma_sync_sg_for_device);
 
-int sn_dma_mapping_error(dma_addr_t dma_addr)
+int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 529462c0157..79165122501 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -420,8 +420,10 @@ tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size)
 		entry = find_next_zero_bit(map, mapsize, last_entry);
 	}
 
-	if (entry > mapsize)
+	if (entry > mapsize) {
+		kfree(ca_dmamap);
 		goto map_return;
+	}
 
 	for (i = 0; i < entries; i++)
 		set_bit(entry + i, map);
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index a5f864c445b..f57113f1f89 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -216,10 +216,6 @@ config MEMORY_SIZE
 	default "01000000" if PLAT_M32104UT
 	default "00800000" if PLAT_OAKS32R
 
-config NOHIGHMEM
-	bool
-	default y
-
 config ARCH_DISCONTIGMEM_ENABLE
 	bool "Internal RAM Support"
 	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
@@ -410,11 +406,7 @@ config PCI_DIRECT
 source "drivers/pci/Kconfig"
 
 config ISA
-	bool "ISA support"
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have ISA, say Y, otherwise N.
+	bool
 
 source "drivers/pcmcia/Kconfig"
 
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
index 600d40e3349..d394292498c 100644
--- a/arch/m32r/boot/compressed/misc.c
+++ b/arch/m32r/boot/compressed/misc.c
@@ -70,8 +70,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static unsigned char *input_data;
 static int input_len;
@@ -82,9 +80,6 @@ static unsigned long output_ptr = 0;
 
 #include "m32r_sio.c"
 
-static void *malloc(int size);
-static void free(void *where);
-
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
@@ -92,38 +87,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void* memset(void* s, int c, size_t n)
 {
 	int i;
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index d4eaa2fd181..612d35b082a 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -143,7 +143,7 @@ ret_from_intr:
 	and3	r4, r4, #0x8000		; check BSM bit
 #endif
 	beqz	r4, resume_kernel
-ENTRY(resume_userspace)
+resume_userspace:
 	DISABLE_INTERRUPTS(r4)		; make sure we don't miss an interrupt
 					; setting need_resched or sigpending
 					; between sampling and the iret
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index dab7436d7bb..40180778a5c 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -29,7 +29,6 @@ __INITDATA
 	.global _end
 ENTRY(stext)
 ENTRY(_stext)
-ENTRY(startup_32)
 	/* Setup up the stack pointer */
 	LDIMM	(r0, spi_stack_top)
 	LDIMM	(r1, spu_stack_top)
diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c
index d0c5b0b7da2..2aeae467009 100644
--- a/arch/m32r/kernel/irq.c
+++ b/arch/m32r/kernel/irq.c
@@ -22,9 +22,6 @@
 #include <linux/module.h>
 #include <asm/uaccess.h>
 
-atomic_t irq_err_count;
-atomic_t irq_mis_count;
-
 /*
  * Generic, controller-independent functions:
  */
@@ -63,9 +60,6 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
 skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
 	}
 	return 0;
 }
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index 16bcb189a38..22624b51d4d 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -14,6 +14,7 @@
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/tlbflush.h>
+#include <asm/pgtable.h>
 
 /* platform dependent support */
 EXPORT_SYMBOL(boot_cpu_data);
@@ -65,6 +66,7 @@ EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(empty_zero_page);
 
 EXPORT_SYMBOL(_inb);
 EXPORT_SYMBOL(_inw);
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index a689e2978b6..5be4faaf5b1 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -35,8 +35,6 @@
 
 #include <linux/err.h>
 
-static int hlt_counter=0;
-
 /*
  * Return saved PC of a blocked thread.
  */
@@ -48,31 +46,16 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 /*
  * Powermanagement idle function, if any..
  */
-void (*pm_idle)(void) = NULL;
-EXPORT_SYMBOL(pm_idle);
+static void (*pm_idle)(void) = NULL;
 
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
 /*
  * We use this is we don't have any better
  * idle routine..
  */
-void default_idle(void)
+static void default_idle(void)
 {
 	/* M32R_FIXME: Please use "cpu_sleep" mode.  */
 	cpu_relax();
@@ -260,15 +243,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long spu,
 	return 0;
 }
 
-/*
- * Capture the user space registers if the task is not running (in user space)
- */
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
-	/* M32R_FIXME */
-	return 1;
-}
-
 asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
 	unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
 	struct pt_regs regs)
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 7577f971ea4..929e5c9d3ad 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -84,7 +84,7 @@ void smp_send_timer(void);
 void smp_ipi_timer_interrupt(struct pt_regs *);
 void smp_local_timer_interrupt(void);
 
-void send_IPI_allbutself(int, int);
+static void send_IPI_allbutself(int, int);
 static void send_IPI_mask(cpumask_t, int, int);
 unsigned long send_IPI_mask_phys(cpumask_t, int, int);
 
@@ -722,7 +722,7 @@ void smp_local_timer_interrupt(void)
  * ---------- --- --------------------------------------------------------
  *
  *==========================================================================*/
-void send_IPI_allbutself(int ipi_num, int try)
+static void send_IPI_allbutself(int ipi_num, int try)
 {
 	cpumask_t cpumask;
 
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 994cc155635..6ea017727cc 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -34,7 +34,6 @@
 #include <asm/hw_irq.h>
 
 #ifdef CONFIG_SMP
-extern void send_IPI_allbutself(int, int);
 extern void smp_local_timer_interrupt(void);
 #endif
 
@@ -188,7 +187,7 @@ static long last_rtc_update = 0;
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 #ifndef CONFIG_SMP
 	profile_tick(CPU_PROFILING);
@@ -228,7 +227,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-struct irqaction irq0 = {
+static struct irqaction irq0 = {
 	.handler = timer_interrupt,
 	.flags = IRQF_DISABLED,
 	.mask = CPU_MASK_NONE,
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 46159a4e644..03b14e55cd8 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -61,7 +61,7 @@ extern unsigned long	eit_vector[];
 	((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \
 	+ 0xff000000UL
 
-void	set_eit_vector_entries(void)
+static void set_eit_vector_entries(void)
 {
 	extern void default_eit_handler(void);
 	extern void system_call(void);
@@ -121,9 +121,9 @@ void __init trap_init(void)
 	cpu_init();
 }
 
-int kstack_depth_to_print = 24;
+static int kstack_depth_to_print = 24;
 
-void show_trace(struct task_struct *task, unsigned long *stack)
+static void show_trace(struct task_struct *task, unsigned long *stack)
 {
 	unsigned long addr;
 
@@ -224,7 +224,7 @@ bad:
 	printk("\n");
 }
 
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
 
 void die(const char * str, struct pt_regs * regs, long err)
 {
diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c
index 59bfc34e0d9..ced549be80f 100644
--- a/arch/m32r/lib/delay.c
+++ b/arch/m32r/lib/delay.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/param.h>
+#include <linux/module.h>
 #ifdef CONFIG_SMP
 #include <linux/sched.h>
 #include <asm/current.h>
@@ -121,3 +122,4 @@ void __ndelay(unsigned long nsecs)
 {
 	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
 }
+EXPORT_SYMBOL(__ndelay);
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 07c1af7dc0e..cbc3c4c5456 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -20,7 +20,6 @@ extern char _end[];
 
 struct pglist_data *node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
 
 pg_data_t m32r_node_data[MAX_NUMNODES];
 
@@ -81,7 +80,7 @@ unsigned long __init setup_memory(void)
 	for_each_online_node(nid) {
 		mp = &mem_prof[nid];
 		NODE_DATA(nid)=(pg_data_t *)&m32r_node_data[nid];
-		NODE_DATA(nid)->bdata = &node_bdata[nid];
+		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 		min_pfn = mp->start_pfn;
 		max_pfn = mp->start_pfn + mp->pages;
 		bootmap_size = init_bootmem_node(NODE_DATA(nid), mp->free_pfn,
@@ -124,8 +123,7 @@ unsigned long __init setup_memory(void)
 	return max_low_pfn;
 }
 
-#define START_PFN(nid)	\
-	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)		(NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
 
 unsigned long __init zone_sizes_init(void)
@@ -148,8 +146,7 @@ unsigned long __init zone_sizes_init(void)
 		zholes_size[ZONE_DMA] = mp->holes;
 		holes += zholes_size[ZONE_DMA];
 
-		free_area_init_node(nid, NODE_DATA(nid), zones_size,
-			start_pfn, zholes_size);
+		free_area_init_node(nid, zones_size, start_pfn, zholes_size);
 	}
 
 	/*
@@ -163,4 +160,3 @@ unsigned long __init zone_sizes_init(void)
 
 	return holes;
 }
-
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index bbd97c85bc5..24d429f9358 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -36,42 +36,6 @@ pgd_t swapper_pg_dir[1024];
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n",highmem);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 /*
  * Cache of MMU context last used.
  */
@@ -93,8 +57,7 @@ void free_initrd_mem(unsigned long, unsigned long);
 #endif
 
 /* It'd be good if these lines were in the standard header file. */
-#define START_PFN(nid)	\
-	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)		(NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
 
 #ifndef CONFIG_DISCONTIGMEM
@@ -123,7 +86,7 @@ unsigned long __init zone_sizes_init(void)
 	start_pfn = __MEMORY_START >> PAGE_SHIFT;
 #endif /* CONFIG_MMU */
 
-	free_area_init_node(0, NODE_DATA(0), zones_size, start_pfn, 0);
+	free_area_init_node(0, zones_size, start_pfn, 0);
 
 	return 0;
 }
@@ -252,4 +215,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 	printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 }
 #endif
-
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 55ea52fe6ac..8c5e1de68fc 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -490,28 +490,6 @@ config ATARI_MFPSER
 	  Note for Falcon users: You also have an MFP port, it's just not
 	  wired to the outside... But you could use the port under Linux.
 
-config ATARI_SCC
-	tristate "Atari SCC serial support"
-	depends on ATARI
-	---help---
-	  If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
-	  LAN) and like to use them under Linux, say Y. All built-in SCC's are
-	  supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
-	  two connectors for channel A (Serial2 and LAN), they are visible as
-	  two separate devices.
-
-	  To compile this driver as a module, choose M here.
-
-config ATARI_SCC_DMA
-	bool "Atari SCC serial DMA support"
-	depends on ATARI_SCC
-	help
-	  This enables DMA support for receiving data on channel A of the SCC.
-	  If you have a TT you may say Y here and read
-	  drivers/char/atari_SCC.README. All other users should say N here,
-	  because only the TT has SCC-DMA, even if your machine keeps claiming
-	  so at boot time.
-
 config ATARI_MIDI
 	tristate "Atari MIDI serial support"
 	depends on ATARI
@@ -578,18 +556,6 @@ config MAC_HID
 	depends on INPUT_ADBHID
 	default y
 
-config ADB_KEYBOARD
-	bool "Support for ADB keyboard (old driver)"
-	depends on MAC && !INPUT_ADBHID
-	help
-	  This option allows you to use an ADB keyboard attached to your
-	  machine. Note that this disables any other (ie. PS/2) keyboard
-	  support, even if your machine is physically capable of using both at
-	  the same time.
-
-	  If you use an ADB keyboard (4 pin connector), say Y here.
-	  If you use a PS/2 keyboard (6 pin connector), say N here.
-
 config HPDCA
 	tristate "HP DCA serial support"
 	depends on DIO && SERIAL_8250
@@ -640,7 +606,7 @@ config DN_SERIAL
 
 config SERIAL_CONSOLE
 	bool "Support for serial port console"
-	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index b15173f28a2..8133dbc4496 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,7 +13,7 @@
 # Copyright (C) 1994 by Hamish Macdonald
 #
 
-KBUILD_DEFCONFIG := amiga_defconfig
+KBUILD_DEFCONFIG := multi_defconfig
 
 # override top level makefile
 AS += -m68020
diff --git a/arch/m68k/amiga/chipram.c b/arch/m68k/amiga/chipram.c
index cbe36538af4..61df1d33c05 100644
--- a/arch/m68k/amiga/chipram.c
+++ b/arch/m68k/amiga/chipram.c
@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 50f5daab46b..df679d96b1c 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -36,14 +36,11 @@
 #include <asm/machdep.h>
 #include <asm/io.h>
 
-unsigned long amiga_model;
-EXPORT_SYMBOL(amiga_model);
+static unsigned long amiga_model;
 
 unsigned long amiga_eclock;
 EXPORT_SYMBOL(amiga_eclock);
 
-unsigned long amiga_masterclock;
-
 unsigned long amiga_colorclock;
 EXPORT_SYMBOL(amiga_colorclock);
 
@@ -51,7 +48,9 @@ unsigned long amiga_chipset;
 EXPORT_SYMBOL(amiga_chipset);
 
 unsigned char amiga_vblank;
-unsigned char amiga_psfreq;
+EXPORT_SYMBOL(amiga_vblank);
+
+static unsigned char amiga_psfreq;
 
 struct amiga_hw_present amiga_hw_present;
 EXPORT_SYMBOL(amiga_hw_present);
@@ -92,8 +91,6 @@ static char *amiga_models[] __initdata = {
 static char amiga_model_name[13] = "Amiga ";
 
 static void amiga_sched_init(irq_handler_t handler);
-/* amiga specific irq functions */
-extern void amiga_init_IRQ(void);
 static void amiga_get_model(char *model);
 static int amiga_get_hardware_list(char *buffer);
 /* amiga specific timer functions */
@@ -107,8 +104,6 @@ static void amiga_reset(void);
 extern void amiga_init_sound(void);
 static void amiga_mem_console_write(struct console *co, const char *b,
 				    unsigned int count);
-void amiga_serial_console_write(struct console *co, const char *s,
-				unsigned int count);
 #ifdef CONFIG_HEARTBEAT
 static void amiga_heartbeat(int on);
 #endif
@@ -418,8 +413,7 @@ void __init config_amiga(void)
 	mach_heartbeat = amiga_heartbeat;
 #endif
 
-	/* Fill in the clock values (based on the 700 kHz E-Clock) */
-	amiga_masterclock = 40*amiga_eclock;	/* 28 MHz */
+	/* Fill in the clock value (based on the 700 kHz E-Clock) */
 	amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
 
 	/* clear all DMA bits */
@@ -817,8 +811,8 @@ static void amiga_serial_putc(char c)
 		;
 }
 
-void amiga_serial_console_write(struct console *co, const char *s,
-				unsigned int count)
+static void amiga_serial_console_write(struct console *co, const char *s,
+				       unsigned int count)
 {
 	while (count--) {
 		if (*s == '\n')
@@ -827,7 +821,7 @@ void amiga_serial_console_write(struct console *co, const char *s,
 	}
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 void amiga_serial_puts(const char *s)
 {
 	amiga_serial_console_write(NULL, s, strlen(s));
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 8a2a53b3361..bb959fbab2d 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -580,13 +580,15 @@ int atari_keyb_init(void)
 	do {
 		/* reset IKBD ACIA */
 		acia.key_ctrl = ACIA_RESET |
-				(atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_IKBD) ?
+				 ACIA_RHTID : 0);
 		(void)acia.key_ctrl;
 		(void)acia.key_data;
 
 		/* reset MIDI ACIA */
 		acia.mid_ctrl = ACIA_RESET |
-				(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
 		(void)acia.mid_ctrl;
 		(void)acia.mid_data;
 
@@ -599,7 +601,8 @@ int atari_keyb_init(void)
 				 ACIA_RHTID : ACIA_RLTID);
 
 		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
-				(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
 
 	/* make sure the interrupt line is up */
 	} while ((mfp.par_dt_reg & 0x10) == 0);
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 043ddbc61c7..702b15ccfab 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -20,14 +20,6 @@
 #include <asm/atarihw.h>
 #include <asm/atariints.h>
 
-/* Flag that Modem1 port is already initialized and used */
-int atari_MFP_init_done;
-EXPORT_SYMBOL(atari_MFP_init_done);
-
-/* Flag that Modem1 port is already initialized and used */
-int atari_SCC_init_done;
-EXPORT_SYMBOL(atari_SCC_init_done);
-
 /* Can be set somewhere, if a SCC master reset has already be done and should
  * not be repeated; used by kgdb */
 int atari_SCC_reset_done;
@@ -47,8 +39,8 @@ static inline void ata_mfp_out(char c)
 	mfp.usart_dta = c;
 }
 
-void atari_mfp_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void atari_mfp_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -66,8 +58,8 @@ static inline void ata_scc_out(char c)
 	scc.cha_b_data = c;
 }
 
-void atari_scc_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void atari_scc_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -83,8 +75,8 @@ static inline void ata_midi_out(char c)
 	acia.mid_data = c;
 }
 
-void atari_midi_console_write(struct console *co, const char *str,
-			      unsigned int count)
+static void atari_midi_console_write(struct console *co, const char *str,
+				     unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -136,7 +128,7 @@ static void atari_par_console_write(struct console *co, const char *str,
 	}
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 int atari_mfp_console_wait_key(struct console *co)
 {
 	while (!(mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
@@ -166,11 +158,7 @@ int atari_midi_console_wait_key(struct console *co)
  * SCC serial ports. They're used by the debugging interface, kgdb, and the
  * serial console code.
  */
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_mfp_port(int cflag)
-#else
-void atari_init_mfp_port(int cflag)
-#endif
 {
 	/*
 	 * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
@@ -193,8 +181,6 @@ void atari_init_mfp_port(int cflag)
 	mfp.tim_dt_d = baud_table[baud];
 	mfp.tim_ct_cd |= 0x01;		/* start timer D, 1:4 */
 	mfp.trn_stat |= 0x01;		/* enable TX */
-
-	atari_MFP_init_done = 1;
 }
 
 #define SCC_WRITE(reg, val)				\
@@ -214,11 +200,7 @@ void atari_init_mfp_port(int cflag)
 			MFPDELAY();			\
 	} while (0)
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_scc_port(int cflag)
-#else
-void atari_init_scc_port(int cflag)
-#endif
 {
 	extern int atari_SCC_reset_done;
 	static int clksrc_table[9] =
@@ -277,14 +259,9 @@ void atari_init_scc_port(int cflag)
 	SCC_WRITE(5, reg5 | 8);
 
 	atari_SCC_reset_done = 1;
-	atari_SCC_init_done = 1;
 }
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_midi_port(int cflag)
-#else
-void atari_init_midi_port(int cflag)
-#endif
 {
 	int baud = cflag & CBAUD;
 	int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 8e2a0f5faf5..8bd61a640fc 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -166,10 +172,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -183,6 +185,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -460,6 +466,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -470,6 +477,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -489,8 +497,6 @@ CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -556,6 +562,7 @@ CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -564,7 +571,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -573,13 +580,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -722,6 +725,7 @@ CONFIG_INPUT_M68K_BEEP=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -757,6 +761,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -768,8 +773,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -844,10 +851,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
@@ -861,6 +864,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -899,6 +903,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -958,6 +963,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,7 +986,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -989,7 +994,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1054,6 +1058,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1113,6 +1119,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1154,6 +1164,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index e2d511e2a1d..c41b854c028 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -161,10 +167,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -178,6 +180,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -411,6 +414,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -430,7 +434,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -499,6 +506,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -532,7 +536,6 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -627,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -657,6 +661,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -738,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -753,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -789,6 +793,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -848,6 +853,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -860,18 +866,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -880,7 +885,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -944,6 +948,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1003,6 +1009,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1044,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6e20d656ada..654c5acb9e8 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -409,6 +412,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -428,7 +432,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -452,6 +458,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -462,6 +469,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -479,8 +487,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_FALCON_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -530,6 +536,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ATARI_SCSI=y
 # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
 # CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -538,7 +545,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -547,13 +554,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -666,6 +669,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -782,10 +789,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
@@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -806,11 +810,8 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
 
 #
 # File systems
@@ -820,8 +821,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -840,6 +843,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -899,6 +903,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -920,7 +925,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -929,7 +933,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -994,6 +997,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1053,6 +1058,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1094,6 +1103,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index a0a9b30bb50..2e44af0fe54 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -759,6 +764,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -818,6 +824,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -830,18 +837,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -850,7 +856,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -915,6 +920,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -974,6 +981,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1015,6 +1026,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 6778041de26..3570fc89b08 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -412,6 +415,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -431,7 +435,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -449,6 +455,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -500,6 +507,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -508,7 +516,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -517,13 +525,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -636,6 +640,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -666,6 +671,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -677,8 +683,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -747,10 +755,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -762,6 +766,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -796,6 +801,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -855,6 +861,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -867,18 +874,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -887,7 +893,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -951,6 +956,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1010,6 +1017,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1051,6 +1062,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 7cd37574034..db6e8822594 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -460,6 +467,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,8 +485,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_MAC_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -527,6 +533,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -535,7 +542,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -544,9 +551,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@@ -559,7 +563,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -670,6 +673,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -784,10 +791,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -836,6 +840,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -895,6 +900,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -917,7 +923,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -926,7 +931,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -991,6 +995,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1050,6 +1056,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1091,6 +1101,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 0747fa3984d..1a806102b99 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,10 +179,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -190,6 +192,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -427,6 +430,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -446,7 +450,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -476,6 +482,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -486,6 +493,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -508,8 +516,6 @@ CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -584,6 +590,7 @@ CONFIG_MVME147_SCSI=y
 CONFIG_MVME16x_SCSI=y
 CONFIG_BVME6000_SCSI=y
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -592,7 +599,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -601,9 +608,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@@ -616,7 +620,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -632,7 +635,6 @@ CONFIG_A2065=m
 CONFIG_HYDRA=m
 CONFIG_ZORRO8390=m
 CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
 CONFIG_MAC8390=y
 CONFIG_MAC89x0=m
 CONFIG_MACSONIC=m
@@ -791,6 +793,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -827,6 +830,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -838,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -923,10 +929,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND_PAULA=m
@@ -942,6 +944,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -949,8 +952,6 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
@@ -972,8 +973,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -992,6 +995,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1051,6 +1055,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1063,18 +1068,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1083,7 +1087,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -1152,6 +1155,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1211,6 +1216,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1252,6 +1261,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index e7a8246840b..cacb5aef6a3 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -502,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -510,7 +518,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -519,13 +527,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -630,6 +634,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -660,6 +665,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -671,8 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -707,10 +715,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -722,6 +726,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -758,6 +763,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -817,6 +823,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -829,18 +836,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -849,7 +855,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -914,6 +919,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -973,6 +980,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1014,6 +1025,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index ab536eb172b..a183e25e348 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -760,6 +765,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -819,6 +825,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -831,18 +838,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -851,7 +857,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -916,6 +921,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -975,6 +982,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1016,6 +1027,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index e05be687b50..72eaff0776b 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -163,10 +169,6 @@ CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -458,6 +465,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -475,8 +483,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -536,6 +542,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -544,7 +551,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -553,13 +560,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -680,6 +683,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -711,6 +715,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -722,8 +727,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -792,10 +799,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_Q40=m
 CONFIG_DMASOUND=m
@@ -809,6 +812,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -843,6 +847,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -902,6 +907,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -924,7 +930,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -933,7 +938,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -997,6 +1001,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1056,6 +1062,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1097,6 +1107,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 296340d2b31..cb62b96d766 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,10 +155,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -166,6 +168,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -399,6 +402,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -418,7 +422,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -436,6 +442,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -488,6 +495,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -496,7 +504,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -505,13 +513,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -527,7 +531,6 @@ CONFIG_SUN3_82586=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -617,6 +620,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -647,19 +651,20 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -727,10 +732,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -776,6 +777,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -835,6 +837,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -847,18 +850,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -867,7 +869,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -932,6 +933,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -991,6 +994,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1032,6 +1039,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 8d3a416c92b..04b4363a705 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -160,10 +166,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -177,6 +179,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -447,6 +453,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -499,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -627,6 +631,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -657,6 +662,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -668,8 +674,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -737,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -752,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -786,6 +791,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -845,6 +851,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -857,18 +864,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -877,7 +883,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -942,6 +947,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 
 #
@@ -1001,6 +1008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1042,6 +1053,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/m68k/fpsp040/Makefile b/arch/m68k/fpsp040/Makefile
index 0214d2f6f8b..9506d883ace 100644
--- a/arch/m68k/fpsp040/Makefile
+++ b/arch/m68k/fpsp040/Makefile
@@ -10,7 +10,6 @@ obj-y    := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
 	    x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
 	    x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
 
 $(OS_OBJS): fpsp.h
diff --git a/arch/m68k/ifpsp060/Makefile b/arch/m68k/ifpsp060/Makefile
index 2fe8472cb5e..43b43504945 100644
--- a/arch/m68k/ifpsp060/Makefile
+++ b/arch/m68k/ifpsp060/Makefile
@@ -6,5 +6,4 @@
 
 obj-y := fskeleton.o iskeleton.o os.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 7a62a718143..3a7f6222550 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -16,5 +16,3 @@ devres-y = ../../../kernel/irq/devres.o
 
 obj-$(CONFIG_PCI)	+= bios32.o
 obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo
-
-EXTRA_AFLAGS := -traditional
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 18a9c5f4b00..f28404d9a2b 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -747,4 +747,10 @@ sys_call_table:
 	.long sys_fallocate		/* 320 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 325 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index a9fb83a8c18..ea1e44da19b 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -26,6 +26,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/setup.h>
+#include <asm/fpu.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
@@ -40,6 +41,11 @@
 #include <asm/dvma.h>
 #endif
 
+#if !FPSTATESIZE || !NR_IRQS
+#warning No CPU/platform type selected, your kernel will not work!
+#warning Are you building an allnoconfig kernel?
+#endif
+
 unsigned long m68k_machtype;
 EXPORT_SYMBOL(m68k_machtype);
 unsigned long m68k_cputype;
@@ -116,6 +122,7 @@ extern int bvme6000_parse_bootinfo(const struct bi_record *);
 extern int mvme16x_parse_bootinfo(const struct bi_record *);
 extern int mvme147_parse_bootinfo(const struct bi_record *);
 extern int hp300_parse_bootinfo(const struct bi_record *);
+extern int apollo_parse_bootinfo(const struct bi_record *);
 
 extern void config_amiga(void);
 extern void config_atari(void);
@@ -183,6 +190,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
 				unknown = mvme147_parse_bootinfo(record);
 			else if (MACH_IS_HP300)
 				unknown = hp300_parse_bootinfo(record);
+			else if (MACH_IS_APOLLO)
+				unknown = apollo_parse_bootinfo(record);
 			else
 				unknown = 1;
 		}
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 7537cc5e615..99b0784c055 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -1,6 +1,7 @@
 /* ld script to make m68k Linux kernel */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -41,7 +42,7 @@ SECTIONS
   _edata = .;			/* End of data section */
 
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
   .init.text : {
 	_sinittext = .;
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index cdc313e7c29..8a4919e4d36 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -1,6 +1,7 @@
 /* ld script to make m68k Linux kernel */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -34,7 +35,7 @@ SECTIONS
   _edata = .;
 
   /* will be freed after init */
-  . = ALIGN(8192);	/* Init code and data */
+  . = ALIGN(PAGE_SIZE);	/* Init code and data */
 __init_begin = .;
 	.init.text : {
 		_sinittext = .;
@@ -61,12 +62,12 @@ __init_begin = .;
 	}
 	SECURITY_INIT
 #ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(8192);
+	. = ALIGN(PAGE_SIZE);
 	__initramfs_start = .;
 	.init.ramfs : { *(.init.ramfs) }
 	__initramfs_end = .;
 #endif
-	. = ALIGN(8192);
+	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	.data.init.task : { *(.data.init_task) }
 
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index a18af095cd7..af9abf8d9d9 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -2,7 +2,5 @@
 # Makefile for m68k-specific library files..
 #
 
-EXTRA_AFLAGS := -traditional
-
 lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
 	   checksum.o string.o uaccess.o
diff --git a/arch/m68k/mac/Makefile b/arch/m68k/mac/Makefile
index 1d265ba365a..daebd80bdef 100644
--- a/arch/m68k/mac/Makefile
+++ b/arch/m68k/mac/Makefile
@@ -2,5 +2,5 @@
 # Makefile for Linux arch/m68k/mac source directory
 #
 
-obj-y		:= config.o bootparse.o macints.o iop.o via.o oss.o psc.o \
+obj-y		:= config.o macints.o iop.o via.o oss.o psc.o \
 			baboon.o macboing.o debug.o misc.o
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index 673a1085984..c7b25b0aacf 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -11,7 +11,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
@@ -23,9 +22,7 @@
 /* #define DEBUG_IRQS */
 
 int baboon_present;
-volatile struct baboon *baboon;
-
-irqreturn_t baboon_irq(int, void *);
+static volatile struct baboon *baboon;
 
 #if 0
 extern int macide_ack_intr(struct ata_channel *);
@@ -50,20 +47,10 @@ void __init baboon_init(void)
 }
 
 /*
- * Register the Baboon interrupt dispatcher on nubus slot $C.
- */
-
-void __init baboon_register_interrupts(void)
-{
-	request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-		    "baboon", (void *) baboon);
-}
-
-/*
  * Baboon interrupt handler. This works a lot like a VIA.
  */
 
-irqreturn_t baboon_irq(int irq, void *dev_id)
+static irqreturn_t baboon_irq(int irq, void *dev_id)
 {
 	int irq_bit, irq_num;
 	unsigned char events;
@@ -95,6 +82,16 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Register the Baboon interrupt dispatcher on nubus slot $C.
+ */
+
+void __init baboon_register_interrupts(void)
+{
+	request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
+		    "baboon", (void *) baboon);
+}
+
 void baboon_irq_enable(int irq) {
 #ifdef DEBUG_IRQUSE
 	printk("baboon_irq_enable(%d)\n", irq);
diff --git a/arch/m68k/mac/bootparse.c b/arch/m68k/mac/bootparse.c
deleted file mode 100644
index 36d22360982..00000000000
--- a/arch/m68k/mac/bootparse.c
+++ /dev/null
@@ -1,122 +0,0 @@
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-
-/*
- *	Booter vars
- */
-
-int boothowto;
-int _boothowto;
-
-/*
- *	Called early to parse the environment (passed to us from the booter)
- *	into a bootinfo struct. Will die as soon as we have our own booter
- */
-
-#define atol(x)	simple_strtoul(x,NULL,0)
-
-void parse_booter(char *env)
-{
-	char *name;
-	char *value;
-#if 0
-	while(0 && *env)
-#else
-	while(*env)
-#endif
-	{
-		name=env;
-		value=name;
-		while(*value!='='&&*value)
-			value++;
-		if(*value=='=')
-			*value++=0;
-		env=value;
-		while(*env)
-			env++;
-		env++;
-#if 0
-		if(strcmp(name,"VIDEO_ADDR")==0)
-			mac_mch.videoaddr=atol(value);
-		if(strcmp(name,"ROW_BYTES")==0)
-			mac_mch.videorow=atol(value);
-		if(strcmp(name,"SCREEN_DEPTH")==0)
-			mac_mch.videodepth=atol(value);
-		if(strcmp(name,"DIMENSIONS")==0)
-			mac_mch.dimensions=atol(value);
-#endif
-		if(strcmp(name,"BOOTTIME")==0)
-			mac_bi_data.boottime=atol(value);
-		if(strcmp(name,"GMTBIAS")==0)
-			mac_bi_data.gmtbias=atol(value);
-		if(strcmp(name,"BOOTERVER")==0)
-			mac_bi_data.bootver=atol(value);
-		if(strcmp(name,"MACOS_VIDEO")==0)
-			mac_bi_data.videological=atol(value);
-		if(strcmp(name,"MACOS_SCC")==0)
-			mac_bi_data.sccbase=atol(value);
-		if(strcmp(name,"MACHINEID")==0)
-			mac_bi_data.id=atol(value);
-		if(strcmp(name,"MEMSIZE")==0)
-			mac_bi_data.memsize=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_FLAGS")==0)
-			mac_bi_data.serialmf=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_HSKICLK")==0)
-			mac_bi_data.serialhsk=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_GPICLK")==0)
-			mac_bi_data.serialgpi=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_FLAGS")==0)
-			mac_bi_data.printmf=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_HSKICLK")==0)
-			mac_bi_data.printhsk=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_GPICLK")==0)
-			mac_bi_data.printgpi=atol(value);
-		if(strcmp(name,"PROCESSOR")==0)
-			mac_bi_data.cpuid=atol(value);
-		if(strcmp(name,"ROMBASE")==0)
-			mac_bi_data.rombase=atol(value);
-		if(strcmp(name,"TIMEDBRA")==0)
-			mac_bi_data.timedbra=atol(value);
-		if(strcmp(name,"ADBDELAY")==0)
-			mac_bi_data.adbdelay=atol(value);
-	}
-#if 0	/* XXX: TODO with m68k_mach_* */
-	/* Fill in the base stuff */
-	boot_info.machtype=MACH_MAC;
-	/* Read this from the macinfo we got ! */
-/*	boot_info.cputype=CPU_68020|FPUB_68881;*/
-/*	boot_info.memory[0].addr=0;*/
-/*	boot_info.memory[0].size=((mac_bi_data.id>>7)&31)<<20;*/
-	boot_info.num_memory=1;		/* On a MacII */
-	boot_info.ramdisk_size=0;	/* For now */
-	*boot_info.command_line=0;
-#endif
- }
-
-
-void print_booter(char *env)
-{
-	char *name;
-	char *value;
-	while(*env)
-	{
-		name=env;
-		value=name;
-		while(*value!='='&&*value)
-			value++;
-		if(*value=='=')
-			*value++=0;
-		env=value;
-		while(*env)
-			env++;
-		env++;
-		printk("%s=%s\n", name,value);
-	}
- }
-
-
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index ad3e3bacae3..c45e18449f3 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -46,7 +46,6 @@
 /* Mac bootinfo struct */
 
 struct mac_booter_data mac_bi_data;
-int mac_bisize = sizeof mac_bi_data;
 
 /* New m68k bootinfo stuff and videobase */
 
@@ -55,10 +54,8 @@ extern struct mem_info m68k_memory[NUM_MEMINFO];
 
 extern struct mem_info m68k_ramdisk;
 
-void *mac_env;					/* Loaded by the boot asm */
-
 /* The phys. video addr. - might be bogus on some machines */
-unsigned long mac_orig_videoaddr;
+static unsigned long mac_orig_videoaddr;
 
 /* Mac specific timer functions */
 extern unsigned long mac_gettimeoffset(void);
@@ -79,6 +76,8 @@ extern void mac_mksound(unsigned int, unsigned int);
 extern void nubus_sweep_video(void);
 
 static void mac_get_model(char *str);
+static void mac_identify(void);
+static void mac_report_hardware(void);
 
 static void __init mac_sched_init(irq_handler_t vector)
 {
@@ -765,7 +764,7 @@ static struct mac_model mac_data_table[] = {
 	}
 };
 
-void __init mac_identify(void)
+static void __init mac_identify(void)
 {
 	struct mac_model *m;
 
@@ -821,7 +820,7 @@ void __init mac_identify(void)
 	baboon_init();
 }
 
-void __init mac_report_hardware(void)
+static void __init mac_report_hardware(void)
 {
 	printk(KERN_INFO "Apple Macintosh %s\n", macintosh_config->name);
 }
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index e8a57138b4a..2165740786a 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -51,6 +51,8 @@ extern void mac_serial_print(const char *);
 static int peng, line;
 #endif
 
+#if 0
+
 void mac_debugging_short(int pos, short num)
 {
 #ifdef DEBUG_SCREEN
@@ -125,6 +127,8 @@ void mac_debugging_long(int pos, long addr)
 #endif
 }
 
+#endif  /*  0  */
+
 #ifdef DEBUG_SERIAL
 /*
  * TODO: serial debug code
@@ -142,12 +146,6 @@ struct mac_SCC {
 
 # define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
 
-/* Flag that serial port is already initialized and used */
-int mac_SCC_init_done;
-/* Can be set somewhere, if a SCC master reset has already be done and should
- * not be repeated; used by kgdb */
-int mac_SCC_reset_done;
-
 static int scc_port = -1;
 
 static struct console mac_console_driver = {
@@ -171,8 +169,8 @@ static struct console mac_console_driver = {
  * this driver if Mac.
  */
 
-void mac_debug_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void mac_debug_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	mac_serial_print(str);
 }
@@ -209,8 +207,8 @@ static inline void mac_scca_out(char c)
 	scc.cha_a_data = c;
 }
 
-void mac_sccb_console_write(struct console *co, const char *str,
-			    unsigned int count)
+static void mac_sccb_console_write(struct console *co, const char *str,
+				   unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -219,8 +217,8 @@ void mac_sccb_console_write(struct console *co, const char *str,
 	}
 }
 
-void mac_scca_console_write(struct console *co, const char *str,
-			    unsigned int count)
+static void mac_scca_console_write(struct console *co, const char *str,
+				   unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -265,14 +263,8 @@ void mac_scca_console_write(struct console *co, const char *str,
 		    barrier();				\
 	} while(0)
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init mac_init_scc_port(int cflag, int port)
-#else
-void mac_init_scc_port(int cflag, int port)
-#endif
 {
-	extern int mac_SCC_reset_done;
-
 	/*
 	 * baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k
 	 */
@@ -340,22 +332,9 @@ void mac_init_scc_port(int cflag, int port)
 		SCCA_WRITE(3, reg3 | 1);
 		SCCA_WRITE(5, reg5 | 8);
 	}
-
-	mac_SCC_reset_done = 1;
-	mac_SCC_init_done = 1;
 }
 #endif /* DEBUG_SERIAL */
 
-void mac_init_scca_port(int cflag)
-{
-	mac_init_scc_port(cflag, 0);
-}
-
-void mac_init_sccb_port(int cflag)
-{
-	mac_init_scc_port(cflag, 1);
-}
-
 static int __init mac_debug_setup(char *arg)
 {
 	if (!MACH_IS_MAC)
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index 3c943d2ec57..43d83e054b8 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -30,8 +30,8 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-irqreturn_t oss_irq(int, void *);
-irqreturn_t oss_nubus_irq(int, void *);
+static irqreturn_t oss_irq(int, void *);
+static irqreturn_t oss_nubus_irq(int, void *);
 
 extern irqreturn_t via1_irq(int, void *);
 extern irqreturn_t mac_scc_dispatch(int, void *);
@@ -92,7 +92,7 @@ void __init oss_nubus_init(void)
  * and SCSI; everything else is routed to its own autovector IRQ.
  */
 
-irqreturn_t oss_irq(int irq, void *dev_id)
+static irqreturn_t oss_irq(int irq, void *dev_id)
 {
 	int events;
 
@@ -126,7 +126,7 @@ irqreturn_t oss_irq(int irq, void *dev_id)
  * Unlike the VIA/RBV this is on its own autovector interrupt level.
  */
 
-irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
 {
 	int events, irq_bit, i;
 
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index d66f723b17c..f84a4dd64f9 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -36,7 +36,7 @@ irqreturn_t psc_irq(int, void *);
  * Debugging dump, used in various places to see what's going on.
  */
 
-void psc_debug_dump(void)
+static void psc_debug_dump(void)
 {
 	int	i;
 
@@ -55,7 +55,7 @@ void psc_debug_dump(void)
  * expanded to cover what I think are the other 7 channels.
  */
 
-void psc_dma_die_die_die(void)
+static void psc_dma_die_die_die(void)
 {
 	int i;
 
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index fa485df4160..1bdb03c73c0 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -27,7 +27,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 #include <linux/module.h>
 
 #include <asm/bootinfo.h>
@@ -45,7 +44,7 @@ volatile long *via_memory_bogon=(long *)&via_memory_bogon;
 int rbv_present;
 int via_alt_mapping;
 EXPORT_SYMBOL(via_alt_mapping);
-__u8 rbv_clear;
+static __u8 rbv_clear;
 
 /*
  * Globals for accessing the VIA chip registers without having to
diff --git a/arch/m68k/math-emu/Makefile b/arch/m68k/math-emu/Makefile
index 53994040181..a0935bf9836 100644
--- a/arch/m68k/math-emu/Makefile
+++ b/arch/m68k/math-emu/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_AFLAGS := -traditional
-
 #EXTRA_AFLAGS += -DFPU_EMU_DEBUG
 #EXTRA_CFLAGS += -DFPU_EMU_DEBUG
 
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index d8fb9c5303c..81bb08ceec1 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -32,8 +32,6 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-static bootmem_data_t __initdata bootmem_data[MAX_NUMNODES];
-
 pg_data_t pg_data_map[MAX_NUMNODES];
 EXPORT_SYMBOL(pg_data_map);
 
@@ -58,7 +56,7 @@ void __init m68k_setup_node(int node)
 		pg_data_table[i] = pg_data_map + node;
 	}
 #endif
-	pg_data_map[node].bdata = bootmem_data + node;
+	pg_data_map[node].bdata = bootmem_node_data + node;
 	node_set_online(node);
 }
 
@@ -71,36 +69,6 @@ void __init m68k_setup_node(int node)
 void *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
 
-void show_mem(void)
-{
-	pg_data_t *pgdat;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-	int cached = 0;
-	int i;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat->node_mem_map + i;
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 extern void init_pointer_table(unsigned long ptable);
 
 /* References to section boundaries */
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 30d34f28502..c5dbb9bdb32 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -285,7 +285,6 @@ void __init paging_init(void)
 	 * to a couple of allocated pages
 	 */
 	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-	memset(empty_zero_page, 0, PAGE_SIZE);
 
 	/*
 	 * Set up SFC/DFC registers
@@ -297,7 +296,7 @@ void __init paging_init(void)
 #endif
 	for (i = 0; i < m68k_num_memory; i++) {
 		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
-		free_area_init_node(i, pg_data_map + i, zones_size,
+		free_area_init_node(i, zones_size,
 				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
 	}
 }
diff --git a/arch/m68k/mm/sun3mmu.c b/arch/m68k/mm/sun3mmu.c
index 6a6513aa1ce..1b902dbd437 100644
--- a/arch/m68k/mm/sun3mmu.c
+++ b/arch/m68k/mm/sun3mmu.c
@@ -53,7 +53,6 @@ void __init paging_init(void)
 	wp_works_ok = 0;
 #endif
 	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-	memset(empty_zero_page, 0, PAGE_SIZE);
 
 	address = PAGE_OFFSET;
 	pg_dir = swapper_pg_dir;
@@ -95,7 +94,7 @@ void __init paging_init(void)
 
 	/* I really wish I knew why the following change made things better...  -- Sam */
 /*	free_area_init(zones_size); */
-	free_area_init_node(0, NODE_DATA(0), zones_size,
+	free_area_init_node(0, zones_size,
 			    (__pa(PAGE_OFFSET) >> PAGE_SHIFT) + 1, NULL);
 
 
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 476e18eca75..be9de2f3dc4 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -41,14 +41,12 @@ static void q40_get_model(char *model);
 static int  q40_get_hardware_list(char *buffer);
 extern void q40_sched_init(irq_handler_t handler);
 
-extern unsigned long q40_gettimeoffset(void);
-extern int q40_hwclk(int, struct rtc_time *);
-extern unsigned int q40_get_ss(void);
-extern int q40_set_clock_mmss(unsigned long);
+static unsigned long q40_gettimeoffset(void);
+static int q40_hwclk(int, struct rtc_time *);
+static unsigned int q40_get_ss(void);
+static int q40_set_clock_mmss(unsigned long);
 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
 static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-extern void q40_reset(void);
-void q40_halt(void);
 extern void q40_waitbut(void);
 void q40_set_vectors(void);
 
@@ -127,7 +125,7 @@ static void q40_heartbeat(int on)
 }
 #endif
 
-void q40_reset(void)
+static void q40_reset(void)
 {
         halted = 1;
         printk("\n\n*******************************************\n"
@@ -137,7 +135,8 @@ void q40_reset(void)
 	while (1)
 		;
 }
-void q40_halt(void)
+
+static void q40_halt(void)
 {
         halted = 1;
         printk("\n\n*******************\n"
@@ -165,7 +164,8 @@ static unsigned int serports[] =
 {
 	0x3f8,0x2f8,0x3e8,0x2e8,0
 };
-void q40_disable_irqs(void)
+
+static void q40_disable_irqs(void)
 {
 	unsigned i, j;
 
@@ -227,7 +227,7 @@ static inline unsigned char bin2bcd(unsigned char b)
 }
 
 
-unsigned long q40_gettimeoffset(void)
+static unsigned long q40_gettimeoffset(void)
 {
 	return 5000 * (ql_ticks != 0);
 }
@@ -248,7 +248,7 @@ unsigned long q40_gettimeoffset(void)
  * };
  */
 
-int q40_hwclk(int op, struct rtc_time *t)
+static int q40_hwclk(int op, struct rtc_time *t)
 {
 	if (op) {
 		/* Write.... */
@@ -285,7 +285,7 @@ int q40_hwclk(int op, struct rtc_time *t)
 	return 0;
 }
 
-unsigned int q40_get_ss(void)
+static unsigned int q40_get_ss(void)
 {
 	return bcd2bin(Q40_RTC_SECS);
 }
@@ -295,7 +295,7 @@ unsigned int q40_get_ss(void)
  * clock is out by > 30 minutes.  Logic lifted from atari code.
  */
 
-int q40_set_clock_mmss(unsigned long nowtime)
+static int q40_set_clock_mmss(unsigned long nowtime)
 {
 	int retval = 0;
 	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
diff --git a/arch/m68k/sun3/Makefile b/arch/m68k/sun3/Makefile
index be1a8470d63..38ba0e0ceda 100644
--- a/arch/m68k/sun3/Makefile
+++ b/arch/m68k/sun3/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Linux arch/m68k/sun3 source directory
 #
 
-obj-y	:= sun3ints.o sun3dvma.o sbus.o idprom.o
+obj-y	:= sun3ints.o sun3dvma.o idprom.o
 
 obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index c0fbd278fbb..732087d0735 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@ extern char _text, _end;
 char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
 
 extern unsigned long sun3_gettimeoffset(void);
-extern void sun3_sched_init(irq_handler_t handler);
+static void sun3_sched_init(irq_handler_t handler);
 extern void sun3_get_model (char* model);
 extern void idprom_init (void);
 extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -114,7 +114,8 @@ static void sun3_halt (void)
 
 /* sun3 bootmem allocation */
 
-void __init sun3_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
+static void __init sun3_bootmem_alloc(unsigned long memory_start,
+				      unsigned long memory_end)
 {
 	unsigned long start_page;
 
@@ -164,7 +165,7 @@ void __init config_sun3(void)
 	sun3_bootmem_alloc(memory_start, memory_end);
 }
 
-void __init sun3_sched_init(irq_handler_t timer_routine)
+static void __init sun3_sched_init(irq_handler_t timer_routine)
 {
 	sun3_disable_interrupts();
         intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
diff --git a/arch/m68k/sun3/dvma.c b/arch/m68k/sun3/dvma.c
index d2b3093f240..d522eaab455 100644
--- a/arch/m68k/sun3/dvma.c
+++ b/arch/m68k/sun3/dvma.c
@@ -19,7 +19,7 @@
 
 static unsigned long ptelist[120];
 
-inline unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
+static unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
 {
 	unsigned long pte;
 	unsigned long j;
diff --git a/arch/m68k/sun3/idprom.c b/arch/m68k/sun3/idprom.c
index dca6ab6a4ed..c86ac37d198 100644
--- a/arch/m68k/sun3/idprom.c
+++ b/arch/m68k/sun3/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.22 1996/11/13 05:09:25 davem Exp $
+/*
  * idprom.c: Routines to load the idprom into kernel addresses and
  *           interpret the data contained within.
  *
@@ -25,7 +25,7 @@ static struct idprom idprom_buffer;
  * of the Sparc CPU and have a meaningful IDPROM machtype value that we
  * know about.  See asm-sparc/machines.h for empirical constants.
  */
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 /* First, Sun3's */
     { .name = "Sun 3/160 Series",	.id_machtype = (SM_SUN3 | SM_3_160) },
     { .name = "Sun 3/50",		.id_machtype = (SM_SUN3 | SM_3_50) },
diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c
index fb0f6a20cc3..60f9d4500d7 100644
--- a/arch/m68k/sun3/mmu_emu.c
+++ b/arch/m68k/sun3/mmu_emu.c
@@ -55,7 +55,7 @@ unsigned char pmeg_ctx[PMEGS_NUM];
 
 /* pointers to the mm structs for each task in each
    context. 0xffffffff is a marker for kernel context */
-struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
+static struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
     [0] = (struct mm_struct *)0xffffffff
 };
 
diff --git a/arch/m68k/sun3/prom/Makefile b/arch/m68k/sun3/prom/Makefile
index 6e48ae2a717..da7eac06bca 100644
--- a/arch/m68k/sun3/prom/Makefile
+++ b/arch/m68k/sun3/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.5 1995/11/25 00:59:48 davem Exp $
 # Makefile for the Sun Boot PROM interface library under
 # Linux.
 #
diff --git a/arch/m68k/sun3/prom/console.c b/arch/m68k/sun3/prom/console.c
index 52c1427863d..2bcb6e4bfe5 100644
--- a/arch/m68k/sun3/prom/console.c
+++ b/arch/m68k/sun3/prom/console.c
@@ -1,4 +1,4 @@
-/* $Id: console.c,v 1.10 1996/12/18 06:46:54 tridge Exp $
+/*
  * console.c: Routines that deal with sending and receiving IO
  *            to/from the current console device using the PROM.
  *
@@ -104,8 +104,6 @@ prom_query_input_device()
 				return PROMDEV_ITTYB;
 		}
 		return PROMDEV_I_UNK;
-	case PROM_AP1000:
-		return PROMDEV_I_UNK;
 	};
 }
 #endif
@@ -166,8 +164,6 @@ prom_query_output_device()
 			};
 		}
 		break;
-	case PROM_AP1000:
-		return PROMDEV_I_UNK;
 	};
 	return PROMDEV_O_UNK;
 }
diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index 202adfcc316..d8e6349336b 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.9 1996/12/18 06:46:55 tridge Exp $
+/*
  * init.c:  Initialize internal variables used by the PROM
  *          library functions.
  *
@@ -31,11 +31,6 @@ extern void prom_ranges_init(void);
 
 void __init prom_init(struct linux_romvec *rp)
 {
-#ifdef CONFIG_AP1000
-	extern struct linux_romvec *ap_prom_init(void);
-	rp = ap_prom_init();
-#endif
-
 	romvec = rp;
 #ifndef CONFIG_SUN3
 	switch(romvec->pv_romvers) {
@@ -53,10 +48,6 @@ void __init prom_init(struct linux_romvec *rp)
 		prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
 		prom_halt();
 		break;
-	case 42: /* why not :-) */
-		prom_vers = PROM_AP1000;
-		break;
-
 	default:
 		prom_printf("PROMLIB: Bad PROM version %d\n",
 			    romvec->pv_romvers);
diff --git a/arch/m68k/sun3/prom/misc.c b/arch/m68k/sun3/prom/misc.c
index b88716f2c68..3d60e1337f7 100644
--- a/arch/m68k/sun3/prom/misc.c
+++ b/arch/m68k/sun3/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.15 1997/05/14 20:45:00 davem Exp $
+/*
  * misc.c:  Miscellaneous prom functions that don't belong
  *          anywhere else.
  *
diff --git a/arch/m68k/sun3/prom/printf.c b/arch/m68k/sun3/prom/printf.c
index e7bfde377b5..df85018f487 100644
--- a/arch/m68k/sun3/prom/printf.c
+++ b/arch/m68k/sun3/prom/printf.c
@@ -1,4 +1,4 @@
-/* $Id: printf.c,v 1.5 1996/04/04 16:31:07 tridge Exp $
+/*
  * printf.c:  Internal prom library printf facility.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -37,10 +37,6 @@ prom_printf(char *fmt, ...)
 
 	bptr = ppbuf;
 
-#ifdef CONFIG_AP1000
-        ap_write(1,bptr,strlen(bptr));
-#else
-
 #ifdef CONFIG_KGDB
 	if (kgdb_initialized) {
 		printk("kgdb_initialized = %d\n", kgdb_initialized);
@@ -54,7 +50,6 @@ prom_printf(char *fmt, ...)
 		prom_putchar(ch);
 	}
 #endif
-#endif
 	va_end(args);
 	return;
 }
diff --git a/arch/m68k/sun3/sbus.c b/arch/m68k/sun3/sbus.c
deleted file mode 100644
index babdbfa3cda..00000000000
--- a/arch/m68k/sun3/sbus.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SBus helper functions
- *
- * Sun3 don't have a sbus, but many of the used devices are also
- * used on Sparc machines with sbus. To avoid having a lot of
- * duplicate code, we provide necessary glue stuff to make using
- * of the sbus driver code possible.
- *
- * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-int __init sbus_init(void)
-{
-	return 0;
-}
-
-void *sparc_alloc_io (u32 address, void *virtual, int len, char *name,
-                      u32 bus_type, int rdonly)
-{
-	return (void *)address;
-}
-
-subsys_initcall(sbus_init);
diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c
index 8709677fa02..f9277e8b415 100644
--- a/arch/m68k/sun3/sun3dvma.c
+++ b/arch/m68k/sun3/sun3dvma.c
@@ -29,7 +29,7 @@ static inline void dvma_unmap_iommu(unsigned long a, int b)
 extern void sun3_dvma_init(void);
 #endif
 
-unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
+static unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
 
 #define dvma_index(baddr) ((baddr - DVMA_START) >> DVMA_PAGE_SHIFT)
 
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index cf93481adb1..7364cd67455 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -30,7 +30,7 @@ void sun3_enable_interrupts(void)
 	sun3_enable_irq(0);
 }
 
-int led_pattern[8] = {
+static int led_pattern[8] = {
        ~(0x80), ~(0x01),
        ~(0x40), ~(0x02),
        ~(0x20), ~(0x04),
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8e8441587c2..2e7515e8db9 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -58,10 +58,18 @@ config GENERIC_TIME
 	bool
 	default y
 
+config GENERIC_CMOS_UPDATE
+	bool
+	default y
+
 config TIME_LOW_RES
 	bool
 	default y
 
+config GENERIC_CLOCKEVENTS
+	bool
+	default n
+
 config NO_IOPORT
 	def_bool y
 
@@ -108,11 +116,13 @@ config M5206e
 
 config M520x
 	bool "MCF520x"
+	select GENERIC_CLOCKEVENTS
 	help
 	   Freescale Coldfire 5207/5208 processor support.
 
 config M523x
 	bool "MCF523x"
+	select GENERIC_CLOCKEVENTS
 	help
 	  Freescale Coldfire 5230/1/2/4/5 processor support
 
@@ -138,6 +148,7 @@ config M5275
 
 config M528x
 	bool "MCF528x"
+	select GENERIC_CLOCKEVENTS
 	help
 	  Motorola ColdFire 5280/5282 processor support.
 
@@ -161,6 +172,7 @@ endchoice
 config M527x
 	bool
 	depends on (M5271 || M5275)
+	select GENERIC_CLOCKEVENTS
 	default y
 
 config COLDFIRE
@@ -674,6 +686,9 @@ endchoice
 if COLDFIRE
 source "kernel/Kconfig.preempt"
 endif
+
+source "kernel/time/Kconfig"
+
 source "mm/Kconfig"
 
 endmenu
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index e0b5f62e395..b63bbcf874f 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -8,6 +8,8 @@
 # (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com>
 #
 
+KBUILD_DEFCONFIG := m5208evb_defconfig
+
 platform-$(CONFIG_M68328)	:= 68328
 platform-$(CONFIG_M68EZ328)	:= 68EZ328
 platform-$(CONFIG_M68VZ328)	:= 68VZ328
@@ -90,13 +92,14 @@ export PLATFORM BOARD MODEL CPUCLASS
 cflags-$(CONFIG_M5206)		:= -m5200
 cflags-$(CONFIG_M5206e)		:= -m5200
 cflags-$(CONFIG_M520x)		:= -m5307
-cflags-$(CONFIG_M523x)		:= -m5307
+cflags-$(CONFIG_M523x)		:= $(call cc-option,-mcpu=523x,-m5307)
 cflags-$(CONFIG_M5249)		:= -m5200
-cflags-$(CONFIG_M527x)		:= -m5307
+cflags-$(CONFIG_M5271)		:= $(call cc-option,-mcpu=5271,-m5307)
 cflags-$(CONFIG_M5272)		:= -m5307
-cflags-$(CONFIG_M528x)		:= -m5307
+cflags-$(CONFIG_M5275)		:= $(call cc-option,-mcpu=5275,-m5307)
+cflags-$(CONFIG_M528x)		:= $(call cc-option,-m528x,-m5307)
 cflags-$(CONFIG_M5307)		:= -m5307
-cflags-$(CONFIG_M532x)		:= -m5307
+cflags-$(CONFIG_M532x)		:= $(call cc-option,-mcpu=532x,-m5307)
 cflags-$(CONFIG_M5407)		:= -m5200
 cflags-$(CONFIG_M68328)		:= -m68000
 cflags-$(CONFIG_M68EZ328)	:= -m68000
diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig
new file mode 100644
index 00000000000..6fae33a05e2
--- /dev/null
+++ b/arch/m68knommu/configs/m5208evb_defconfig
@@ -0,0 +1,610 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+CONFIG_M520x=y
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=166666666
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5208EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x2000000
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+# CONFIG_RAMAUTOBIT is not set
+# CONFIG_RAM8BIT is not set
+CONFIG_RAM16BIT=y
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig
new file mode 100644
index 00000000000..cc6458333d6
--- /dev/null
+++ b/arch/m68knommu/configs/m5249evb_defconfig
@@ -0,0 +1,497 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+CONFIG_M5249=y
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=140000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5249C3=y
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig
new file mode 100644
index 00000000000..0d1256f5add
--- /dev/null
+++ b/arch/m68knommu/configs/m5275evb_defconfig
@@ -0,0 +1,627 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+CONFIG_M5275=y
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_M527x=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=150000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5275EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+CONFIG_FEC2=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig
new file mode 100644
index 00000000000..fe2acdfa4d7
--- /dev/null
+++ b/arch/m68knommu/configs/m5307c3_defconfig
@@ -0,0 +1,580 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+CONFIG_M5307=y
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=90000000
+CONFIG_CLOCK_DIV=2
+# CONFIG_OLDMASK is not set
+
+#
+# Platform
+#
+# CONFIG_ARN5307 is not set
+CONFIG_M5307C3=y
+# CONFIG_eLIA is not set
+# CONFIG_SECUREEDGEMP3 is not set
+# CONFIG_CLEOPATRA is not set
+# CONFIG_NETtel is not set
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig
new file mode 100644
index 00000000000..1118936d20e
--- /dev/null
+++ b/arch/m68knommu/configs/m5407c3_defconfig
@@ -0,0 +1,641 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+# Wed May  7 10:25:16 2008
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+CONFIG_M5407=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=50000000
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+CONFIG_M5407C3=y
+# CONFIG_CLEOPATRA is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild
new file mode 100644
index 00000000000..c68e1680da0
--- /dev/null
+++ b/arch/m68knommu/include/asm/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68knommu/include/asm/MC68328.h
new file mode 100644
index 00000000000..a337e56d09b
--- /dev/null
+++ b/arch/m68knommu/include/asm/MC68328.h
@@ -0,0 +1,1266 @@
+
+/* include/asm-m68knommu/MC68328.h: '328 control registers
+ *
+ * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
+ *                     Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68328_H_
+#define _MC68328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Mask Revision Register
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR      LONG_REF(MRR_ADDR)
+ 
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * Group Base Address Registers
+ */
+#define GRPBASEA_ADDR	0xfffff100
+#define GRPBASEB_ADDR	0xfffff102
+#define GRPBASEC_ADDR	0xfffff104
+#define GRPBASED_ADDR	0xfffff106
+
+#define GRPBASEA	WORD_REF(GRPBASEA_ADDR)
+#define GRPBASEB	WORD_REF(GRPBASEB_ADDR)
+#define GRPBASEC	WORD_REF(GRPBASEC_ADDR)
+#define GRPBASED	WORD_REF(GRPBASED_ADDR)
+
+#define GRPBASE_V	  0x0001	/* Valid */
+#define GRPBASE_GBA_MASK  0xfff0	/* Group Base Address (bits 31-20) */
+
+/*
+ * Group Base Address Mask Registers 
+ */
+#define GRPMASKA_ADDR	0xfffff108
+#define GRPMASKB_ADDR	0xfffff10a
+#define GRPMASKC_ADDR	0xfffff10c
+#define GRPMASKD_ADDR	0xfffff10e
+
+#define GRPMASKA	WORD_REF(GRPMASKA_ADDR)
+#define GRPMASKB	WORD_REF(GRPMASKB_ADDR)
+#define GRPMASKC	WORD_REF(GRPMASKC_ADDR)
+#define GRPMASKD	WORD_REF(GRPMASKD_ADDR)
+
+#define GRMMASK_GMA_MASK 0xfffff0	/* Group Base Mask (bits 31-20) */
+
+/*
+ * Chip-Select Option Registers (group A)
+ */
+#define CSA0_ADDR	0xfffff110
+#define CSA1_ADDR	0xfffff114
+#define CSA2_ADDR	0xfffff118
+#define CSA3_ADDR	0xfffff11c
+
+#define CSA0		LONG_REF(CSA0_ADDR)
+#define CSA1		LONG_REF(CSA1_ADDR)
+#define CSA2		LONG_REF(CSA2_ADDR)
+#define CSA3		LONG_REF(CSA3_ADDR)
+
+#define CSA_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSA_WAIT_SHIFT	0
+#define CSA_RO		0x00000008	/* Read-Only */
+#define CSA_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
+#define CSA_AM_SHIFT	8
+#define CSA_BUSW	0x00010000	/* Bus Width Select */
+#define CSA_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
+#define CSA_AC_SHIFT	24
+
+/*
+ * Chip-Select Option Registers (group B)
+ */
+#define CSB0_ADDR	0xfffff120
+#define CSB1_ADDR	0xfffff124
+#define CSB2_ADDR	0xfffff128
+#define CSB3_ADDR	0xfffff12c
+
+#define CSB0		LONG_REF(CSB0_ADDR)
+#define CSB1		LONG_REF(CSB1_ADDR)
+#define CSB2		LONG_REF(CSB2_ADDR)
+#define CSB3		LONG_REF(CSB3_ADDR)
+
+#define CSB_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSB_WAIT_SHIFT	0
+#define CSB_RO		0x00000008	/* Read-Only */
+#define CSB_AM_MASK	0x0000ff00	/* Address Mask (bits 23-16) */
+#define CSB_AM_SHIFT	8
+#define CSB_BUSW	0x00010000	/* Bus Width Select */
+#define CSB_AC_MASK	0xff000000	/* Address Compare (bits 23-16) */
+#define CSB_AC_SHIFT	24
+
+/*
+ * Chip-Select Option Registers (group C)
+ */
+#define CSC0_ADDR	0xfffff130
+#define CSC1_ADDR	0xfffff134
+#define CSC2_ADDR	0xfffff138
+#define CSC3_ADDR	0xfffff13c
+
+#define CSC0		LONG_REF(CSC0_ADDR)
+#define CSC1		LONG_REF(CSC1_ADDR)
+#define CSC2		LONG_REF(CSC2_ADDR)
+#define CSC3		LONG_REF(CSC3_ADDR)
+
+#define CSC_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSC_WAIT_SHIFT	0
+#define CSC_RO		0x00000008	/* Read-Only */
+#define CSC_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
+#define CSC_AM_SHIFT	4
+#define CSC_BUSW	0x00010000	/* Bus Width Select */
+#define CSC_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
+#define CSC_AC_SHIFT	20
+
+/*
+ * Chip-Select Option Registers (group D)
+ */
+#define CSD0_ADDR	0xfffff140
+#define CSD1_ADDR	0xfffff144
+#define CSD2_ADDR	0xfffff148
+#define CSD3_ADDR	0xfffff14c
+
+#define CSD0		LONG_REF(CSD0_ADDR)
+#define CSD1		LONG_REF(CSD1_ADDR)
+#define CSD2		LONG_REF(CSD2_ADDR)
+#define CSD3		LONG_REF(CSD3_ADDR)
+
+#define CSD_WAIT_MASK	0x00000007	/* Wait State Selection */
+#define CSD_WAIT_SHIFT	0
+#define CSD_RO		0x00000008	/* Read-Only */
+#define CSD_AM_MASK	0x0000fff0	/* Address Mask (bits 23-12) */
+#define CSD_AM_SHIFT	4
+#define CSD_BUSW	0x00010000	/* Bus Width Select */
+#define CSD_AC_MASK	0xfff00000	/* Address Compare (bits 23-12) */
+#define CSD_AC_SHIFT	20
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+ 
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_PIXCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_PIXCLK_SEL_SHIFT 11
+
+/* 'EZ328-compatible definitions */
+#define PLLCR_LCDCLK_SEL_MASK	PLLCR_PIXCLK_SEL_MASK
+#define PLLCR_LCDCLK_SEL_SHIFT	PLLCR_PIXCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_STOP		0x40	/* Enter power-save mode immediately */ 
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADRR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+ 
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPIM_IRQ_NUM	0	/* SPI Master interrupt */
+#define	TMR2_IRQ_NUM	1	/* Timer 2 interrupt */
+#define UART_IRQ_NUM	2	/* UART interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define	INT4_IRQ_NUM	12	/* External INT4 */
+#define	INT5_IRQ_NUM	13	/* External INT5 */
+#define	INT6_IRQ_NUM	14	/* External INT6 */
+#define	INT7_IRQ_NUM	15	/* External INT7 */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define PEN_IRQ_NUM	20	/* Pen Interrupt */
+#define SPIS_IRQ_NUM	21	/* SPI Slave Interrupt */
+#define TMR1_IRQ_NUM	22	/* Timer 1 interrupt */
+#define IRQ7_IRQ_NUM	23	/* IRQ7 */
+
+/* '328-compatible definitions */
+#define SPI_IRQ_NUM	SPIM_IRQ_NUM
+#define TMR_IRQ_NUM	TMR1_IRQ_NUM
+ 
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPIM 	(1 << SPIM _IRQ_NUM)	/* Mask SPI Master interrupt */
+#define	IMR_MTMR2	(1 << TMR2_IRQ_NUM)	/* Mask Timer 2 interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define	IMR_MINT4	(1 << INT4_IRQ_NUM)	/* Mask External INT4 */
+#define	IMR_MINT5	(1 << INT5_IRQ_NUM)	/* Mask External INT5 */
+#define	IMR_MINT6	(1 << INT6_IRQ_NUM)	/* Mask External INT6 */
+#define	IMR_MINT7	(1 << INT7_IRQ_NUM)	/* Mask External INT7 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MPEN	(1 << PEN_IRQ_NUM)	/* Mask Pen Interrupt */
+#define IMR_MSPIS	(1 << SPIS_IRQ_NUM)	/* Mask SPI Slave Interrupt */
+#define IMR_MTMR1	(1 << TMR1_IRQ_NUM)	/* Mask Timer 1 interrupt */
+#define IMR_MIRQ7	(1 << IRQ7_IRQ_NUM)	/* Mask IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IMR_MSPI	IMR_MSPIM
+#define IMR_MTMR	IMR_MTMR1
+
+/* 
+ * Interrupt Wake-Up Enable Register
+ */
+#define IWR_ADDR	0xfffff308
+#define IWR		LONG_REF(IWR_ADDR)
+
+#define IWR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	IWR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define IWR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IWR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IWR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IWR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IWR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	IWR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IWR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IWR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IWR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	IWR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	IWR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	IWR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	IWR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define IWR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IWR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IWR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IWR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IWR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define IWR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define IWR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define IWR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	ISR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	ISR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	ISR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	ISR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	ISR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define ISR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define ISR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define ISR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define ISR_SPI	ISR_SPIM
+#define ISR_TMR	ISR_TMR1
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff310
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPIM 	(1 << SPIM _IRQ_NUM)	/* SPI Master interrupt */
+#define	IPR_TMR2	(1 << TMR2_IRQ_NUM)	/* Timer 2 interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator int. */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define	IPR_INT4	(1 << INT4_IRQ_NUM)	/* External INT4 */
+#define	IPR_INT5	(1 << INT5_IRQ_NUM)	/* External INT5 */
+#define	IPR_INT6	(1 << INT6_IRQ_NUM)	/* External INT6 */
+#define	IPR_INT7	(1 << INT7_IRQ_NUM)	/* External INT7 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_PEN		(1 << PEN_IRQ_NUM)	/* Pen Interrupt */
+#define IPR_SPIS	(1 << SPIS_IRQ_NUM)	/* SPI Slave Interrupt */
+#define IPR_TMR1	(1 << TMR1_IRQ_NUM)	/* Timer 1 interrupt */
+#define IPR_IRQ7	(1 << IRQ7_IRQ_NUM)	/* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IPR_SPI	IPR_SPIM
+#define IPR_TMR	IPR_TMR1
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PASEL_ADDR	0xfffff403		/* Port A Select register */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PASEL		BYTE_REF(PASEL_ADDR)
+
+#define PA(x)           (1 << (x))
+#define PA_A(x)		PA((x) - 16)	/* This is specific to PA only! */
+
+#define PA_A16		PA(0)		/* Use A16 as PA(0) */
+#define PA_A17		PA(1)		/* Use A17 as PA(1) */
+#define PA_A18		PA(2)		/* Use A18 as PA(2) */
+#define PA_A19		PA(3)		/* Use A19 as PA(3) */
+#define PA_A20		PA(4)		/* Use A20 as PA(4) */
+#define PA_A21		PA(5)		/* Use A21 as PA(5) */
+#define PA_A22		PA(6)		/* Use A22 as PA(6) */
+#define PA_A23		PA(7)		/* Use A23 as PA(7) */
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)           (1 << (x))
+#define PB_D(x)		PB(x)		/* This is specific to port B only */
+
+#define PB_D0		PB(0)		/* Use D0 as PB(0) */
+#define PB_D1		PB(1)		/* Use D1 as PB(1) */
+#define PB_D2		PB(2)		/* Use D2 as PB(2) */
+#define PB_D3		PB(3)		/* Use D3 as PB(3) */
+#define PB_D4		PB(4)		/* Use D4 as PB(4) */
+#define PB_D5		PB(5)		/* Use D5 as PB(5) */
+#define PB_D6		PB(6)		/* Use D6 as PB(6) */
+#define PB_D7		PB(7)		/* Use D7 as PB(7) */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)           (1 << (x))
+
+#define PC_WE		PC(6)		/* Use WE    as PC(6) */
+#define PC_DTACK	PC(5)		/* Use DTACK as PC(5) */
+#define PC_IRQ7		PC(4)		/* Use IRQ7  as PC(4) */
+#define PC_LDS		PC(2)		/* Use LDS   as PC(2) */
+#define PC_UDS		PC(1)		/* Use UDS   as PC(1) */
+#define PC_MOCLK	PC(0)		/* Use MOCLK as PC(0) */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)           (1 << (x))
+#define PD_KB(x)	PD(x)		/* This is specific for Port D only */
+
+#define PD_KB0		PD(0)	/* Use KB0 as PD(0) */
+#define PD_KB1		PD(1)	/* Use KB1 as PD(1) */
+#define PD_KB2		PD(2)	/* Use KB2 as PD(2) */
+#define PD_KB3		PD(3)	/* Use KB3 as PD(3) */
+#define PD_KB4		PD(4)	/* Use KB4 as PD(4) */
+#define PD_KB5		PD(5)	/* Use KB5 as PD(5) */
+#define PD_KB6		PD(6)	/* Use KB6 as PD(6) */
+#define PD_KB7		PD(7)	/* Use KB7 as PD(7) */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)           (1 << (x))
+
+#define PE_CSA1		PE(1)	/* Use CSA1 as PE(1) */
+#define PE_CSA2		PE(2)	/* Use CSA2 as PE(2) */
+#define PE_CSA3		PE(3)	/* Use CSA3 as PE(3) */
+#define PE_CSB0		PE(4)	/* Use CSB0 as PE(4) */
+#define PE_CSB1		PE(5)	/* Use CSB1 as PE(5) */
+#define PE_CSB2		PE(6)	/* Use CSB2 as PE(6) */
+#define PE_CSB3		PE(7)	/* Use CSB3 as PE(7) */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)           (1 << (x))
+#define PF_A(x)		PF((x) - 24)	/* This is Port F specific only */
+
+#define PF_A24		PF(0)	/* Use A24 as PF(0) */
+#define PF_A25		PF(1)	/* Use A25 as PF(1) */
+#define PF_A26		PF(2)	/* Use A26 as PF(2) */
+#define PF_A27		PF(3)	/* Use A27 as PF(3) */
+#define PF_A28		PF(4)	/* Use A28 as PF(4) */
+#define PF_A29		PF(5)	/* Use A29 as PF(5) */
+#define PF_A30		PF(6)	/* Use A30 as PF(6) */
+#define PF_A31		PF(7)	/* Use A31 as PF(7) */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)           (1 << (x))
+
+#define PG_UART_TXD	PG(0)	/* Use UART_TXD as PG(0) */
+#define PG_UART_RXD	PG(1)	/* Use UART_RXD as PG(1) */
+#define PG_PWMOUT	PG(2)	/* Use PWMOUT   as PG(2) */
+#define PG_TOUT2	PG(3)   /* Use TOUT2    as PG(3) */
+#define PG_TIN2		PG(4)	/* Use TIN2     as PG(4) */
+#define PG_TOUT1	PG(5)   /* Use TOUT1    as PG(5) */
+#define PG_TIN1		PG(6)	/* Use TIN1     as PG(6) */
+#define PG_RTCOUT	PG(7)	/* Use RTCOUT   as PG(7) */
+
+/* 
+ * Port J
+ */
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJSEL_ADDR	0xfffff43b		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)           (1 << (x)) 
+
+#define PJ_CSD3		PJ(7)	/* Use CSD3 as PJ(7) */
+
+/* 
+ * Port K
+ */
+#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
+#define PKDATA_ADDR	0xfffff441		/* Port K data register */
+#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enable reg */
+#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
+
+#define PKDIR		BYTE_REF(PKDIR_ADDR)
+#define PKDATA		BYTE_REF(PKDATA_ADDR)
+#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
+#define PKSEL		BYTE_REF(PKSEL_ADDR)
+
+#define PK(x)           (1 << (x))
+
+/* 
+ * Port M
+ */
+#define PMDIR_ADDR	0xfffff438		/* Port M direction reg */
+#define PMDATA_ADDR	0xfffff439		/* Port M data register */
+#define PMPUEN_ADDR	0xfffff43a		/* Port M Pull-Up enable reg */
+#define PMSEL_ADDR	0xfffff43b		/* Port M Select Register */
+
+#define PMDIR		BYTE_REF(PMDIR_ADDR)
+#define PMDATA		BYTE_REF(PMDATA_ADDR)
+#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
+#define PMSEL		BYTE_REF(PMSEL_ADDR)
+
+#define PM(x)           (1 << (x))
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register 
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0007	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_PWMEN		0x0010	/* Enable PWM */
+#define PMNC_POL		0x0020	/* PWM Output Bit Polarity */
+#define PWMC_PIN		0x0080	/* Current PWM output pin status */
+#define PWMC_LOAD		0x0100	/* Force a new period */
+#define PWMC_IRQEN		0x4000	/* Interrupt Request Enable */
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* 'EZ328-compatible definitions */
+#define PWMC_EN	PWMC_PWMEN
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff502
+#define PWMP		WORD_REF(PWMP_ADDR)
+
+/* 
+ * PWM Width Register 
+ */
+#define PWMW_ADDR	0xfffff504
+#define PWMW		WORD_REF(PWMW_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff506
+#define PWMCNT		WORD_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timers
+ *
+ **********/
+
+/* 
+ * Timer Unit 1 and 2 Control Registers
+ */
+#define TCTL1_ADDR	0xfffff600
+#define TCTL1		WORD_REF(TCTL1_ADDR)
+#define TCTL2_ADDR	0xfffff60c
+#define TCTL2		WORD_REF(TCTL2_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* 'EZ328-compatible definitions */
+#define TCTL_ADDR	TCTL1_ADDR
+#define TCTL		TCTL1
+
+/*
+ * Timer Unit 1 and 2 Prescaler Registers
+ */
+#define TPRER1_ADDR	0xfffff602
+#define TPRER1		WORD_REF(TPRER1_ADDR)
+#define TPRER2_ADDR	0xfffff60e
+#define TPRER2		WORD_REF(TPRER2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TPRER_ADDR	TPRER1_ADDR
+#define TPRER		TPRER1
+
+/*
+ * Timer Unit 1 and 2 Compare Registers
+ */
+#define TCMP1_ADDR	0xfffff604
+#define TCMP1		WORD_REF(TCMP1_ADDR)
+#define TCMP2_ADDR	0xfffff610
+#define TCMP2		WORD_REF(TCMP2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCMP_ADDR	TCMP1_ADDR
+#define TCMP		TCMP1
+
+/*
+ * Timer Unit 1 and 2 Capture Registers
+ */
+#define TCR1_ADDR	0xfffff606
+#define TCR1		WORD_REF(TCR1_ADDR)
+#define TCR2_ADDR	0xfffff612
+#define TCR2		WORD_REF(TCR2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCR_ADDR	TCR1_ADDR
+#define TCR		TCR1
+
+/*
+ * Timer Unit 1 and 2 Counter Registers
+ */
+#define TCN1_ADDR	0xfffff608
+#define TCN1		WORD_REF(TCN1_ADDR)
+#define TCN2_ADDR	0xfffff614
+#define TCN2		WORD_REF(TCN2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCN_ADDR	TCN1_ADDR
+#define TCN		TCN
+
+/*
+ * Timer Unit 1 and 2 Status Registers
+ */
+#define TSTAT1_ADDR	0xfffff60a
+#define TSTAT1		WORD_REF(TSTAT1_ADDR)
+#define TSTAT2_ADDR	0xfffff616
+#define TSTAT2		WORD_REF(TSTAT2_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* 'EZ328-compatible definitions */
+#define TSTAT_ADDR	TSTAT1_ADDR
+#define TSTAT		TSTAT1
+
+/*
+ * Watchdog Compare Register 
+ */
+#define WRR_ADDR	0xfffff61a
+#define WRR		WORD_REF(WRR_ADDR)
+
+/*
+ * Watchdog Counter Register 
+ */
+#define WCN_ADDR	0xfffff61c
+#define WCN		WORD_REF(WCN_ADDR)
+
+/*
+ * Watchdog Control and Status Register
+ */
+#define WCSR_ADDR	0xfffff618
+#define WCSR		WORD_REF(WCSR_ADDR)
+
+#define WCSR_WDEN	0x0001	/* Watchdog Enable */
+#define WCSR_FI		0x0002	/* Forced Interrupt (instead of SW reset)*/
+#define WCSR_WRST	0x0004	/* Watchdog Reset */
+
+/**********
+ *
+ * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
+ *
+ **********/
+
+/*
+ * SPI Slave Register
+ */
+#define SPISR_ADDR	0xfffff700
+#define SPISR		WORD_REF(SPISR_ADDR)
+
+#define SPISR_DATA_ADDR	0xfffff701
+#define SPISR_DATA	BYTE_REF(SPISR_DATA_ADDR)
+
+#define SPISR_DATA_MASK	 0x00ff	/* Shifted data from the external device */
+#define SPISR_DATA_SHIFT 0
+#define SPISR_SPISEN	 0x0100	/* SPIS module enable */
+#define SPISR_POL	 0x0200	/* SPSCLK polarity control */
+#define SPISR_PHA	 0x0400	/* Phase relationship between SPSCLK & SPSRxD */
+#define SPISR_OVWR	 0x0800	/* Data buffer has been overwritten */
+#define SPISR_DATARDY	 0x1000	/* Data ready */
+#define SPISR_ENPOL	 0x2000	/* Enable Polarity */
+#define SPISR_IRQEN	 0x4000	/* SPIS IRQ Enable */
+#define SPISR_SPISIRQ	 0x8000	/* SPIS IRQ posted */
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_SPIMIRQ	 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_RSPIMEN	 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* 'EZ328-compatible definitions */
+#define SPIMCONT_IRQ	SPIMCONT_SPIMIRQ
+#define SPIMCONT_ENABLE	SPIMCONT_SPIMEN
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAVAILEN	0x0001	/* Transmitter Available Int Enable */
+#define USTCNT_TXHALFEN		0x0002	/* Transmitter Half Empty Int Enable */
+#define USTCNT_TXEMPTYEN	0x0004	/* Transmitter Empty Int Enable */
+#define USTCNT_RXREADYEN	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHALFEN		0x0010	/* Receiver Half-Full Int Enable */
+#define USTCNT_RXFULLEN		0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSDELTAEN	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_GPIODELTAEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7		0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP		0x0200	/* Stop bit transmission */
+#define USTCNT_ODD_EVEN		0x0400	/* Odd Parity */
+#define	USTCNT_PARITYEN		0x0800	/* Parity Enable */
+#define USTCNT_CLKMODE		0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN		0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN		0x4000	/* Receiver Enable */
+#define USTCNT_UARTEN		0x8000	/* UART Enable */
+
+/* 'EZ328-compatible definitions */
+#define USTCNT_TXAE	USTCNT_TXAVAILEN 
+#define USTCNT_TXHE	USTCNT_TXHALFEN
+#define USTCNT_TXEE	USTCNT_TXEMPTYEN
+#define USTCNT_RXRE	USTCNT_RXREADYEN
+#define USTCNT_RXHE	USTCNT_RXHALFEN
+#define USTCNT_RXFE	USTCNT_RXFULLEN
+#define USTCNT_CTSD	USTCNT_CTSDELTAEN
+#define USTCNT_ODD	USTCNT_ODD_EVEN
+#define USTCNT_PEN	USTCNT_PARITYEN
+#define USTCNT_CLKM	USTCNT_CLKMODE
+#define USTCNT_UEN	USTCNT_UARTEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_GPIOSRC		0x1000	/* GPIO source */
+#define UBAUD_GPIODIR		0x2000	/* GPIO Direction */
+#define UBAUD_GPIO		0x4000	/* Current GPIO pin status */
+#define UBAUD_GPIODELTA		0x8000	/* GPIO pin value changed */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STATUS	 0x0200	/* CTS State */
+#define	UTX_IGNORE_CTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* 'EZ328-compatible definitions */
+#define UTX_CTS_STAT	UTX_CTS_STATUS
+#define UTX_NOCTS	UTX_IGNORE_CTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int pad1;
+  volatile unsigned short int pad2;
+  volatile unsigned short int pad3;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0xfffffffe	/* Bit 0 is reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with 'EZ328 !!!)
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02ff		/* Bits 0-3 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x02ff		/* Bits 10-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x01	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define LPICF_PBSIZ_MASK 0x06	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x02
+#define   LPICF_PBSIZ_4    0x04
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_PCDS	 0x01	/* Pixel Clock Divider Source Select */
+#define LCKCON_DWIDTH	 0x02	/* Display Memory Width  */
+#define LCKCON_DWS_MASK	 0x3c	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 2
+#define LCKCON_DMA16	 0x40	/* DMA burst length */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* 'EZ328-compatible definitions */
+#define LCKCON_DW_MASK	LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT	LCKCON_DWS_SHIFT
+
+/*
+ * LCD Last Buffer Address Register
+ */
+#define LLBAR_ADDR	0xfffffa29
+#define LLBAR		BYTE_REF(LLBAR_ADDR)
+
+#define LLBAR_LBAR_MASK	 0x7f	/* Number of memory words to fill 1 line */
+#define LLBAR_LBAR_SHIFT 0
+
+/*
+ * LCD Octet Terminal Count Register 
+ */
+#define LOTCR_ADDR	0xfffffa2b
+#define LOTCR		BYTE_REF(LOTCR_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_BOS	0x08	/* Byte offset (for B/W mode only */
+#define LPOSR_POS_MASK	0x07	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa32
+#define LGPMR		WORD_REF(LGPMR_ADDR)
+
+#define LGPMR_GLEVEL3_MASK	0x000f
+#define LGPMR_GLEVEL3_SHIFT	0 
+#define LGPMR_GLEVEL2_MASK	0x00f0
+#define LGPMR_GLEVEL2_SHIFT	4 
+#define LGPMR_GLEVEL0_MASK	0x0f00
+#define LGPMR_GLEVEL0_SHIFT	8 
+#define LGPMR_GLEVEL1_MASK	0xf000
+#define LGPMR_GLEVEL1_SHIFT	12
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_384	0x0020	/* Crystal Selection */
+#define RTCCTL_ENABLE	0x0080	/* RTC Enable */
+
+/* 'EZ328-compatible definitions */
+#define RTCCTL_XTL	RTCCTL_384
+#define RTCCTL_EN	RTCCTL_ENABLE
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK	 0x00ff	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+#endif /* _MC68328_H_ */
diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68knommu/include/asm/MC68332.h
new file mode 100644
index 00000000000..6bb8f02685a
--- /dev/null
+++ b/arch/m68knommu/include/asm/MC68332.h
@@ -0,0 +1,152 @@
+
+/* include/asm-m68knommu/MC68332.h: '332 control registers
+ *
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68332_H_
+#define _MC68332_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+
+#define PORTE_ADDR	0xfffa11
+#define PORTE	BYTE_REF(PORTE_ADDR)
+#define DDRE_ADDR	0xfffa15
+#define DDRE	BYTE_REF(DDRE_ADDR)
+#define PEPAR_ADDR	0xfffa17
+#define PEPAR	BYTE_REF(PEPAR_ADDR)
+
+#define PORTF_ADDR	0xfffa19
+#define PORTF	BYTE_REF(PORTF_ADDR)
+#define DDRF_ADDR	0xfffa1d
+#define DDRF	BYTE_REF(DDRF_ADDR)
+#define PFPAR_ADDR	0xfffa1f
+#define PFPAR	BYTE_REF(PFPAR_ADDR)
+
+#define PORTQS_ADDR	0xfffc15
+#define PORTQS	BYTE_REF(PORTQS_ADDR)
+#define DDRQS_ADDR	0xfffc17
+#define DDRQS	BYTE_REF(DDRQS_ADDR)
+#define PQSPAR_ADDR	0xfffc16
+#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
+
+#define CSPAR0_ADDR 0xFFFA44
+#define CSPAR0 WORD_REF(CSPAR0_ADDR)
+#define CSPAR1_ADDR 0xFFFA46
+#define CSPAR1 WORD_REF(CSPAR1_ADDR)
+#define CSARBT_ADDR 0xFFFA48
+#define CSARBT WORD_REF(CSARBT_ADDR)
+#define CSOPBT_ADDR 0xFFFA4A
+#define CSOPBT WORD_REF(CSOPBT_ADDR)
+#define CSBAR0_ADDR 0xFFFA4C
+#define CSBAR0 WORD_REF(CSBAR0_ADDR)
+#define CSOR0_ADDR 0xFFFA4E
+#define CSOR0 WORD_REF(CSOR0_ADDR)
+#define CSBAR1_ADDR 0xFFFA50
+#define CSBAR1 WORD_REF(CSBAR1_ADDR)
+#define CSOR1_ADDR 0xFFFA52
+#define CSOR1 WORD_REF(CSOR1_ADDR)
+#define CSBAR2_ADDR 0xFFFA54
+#define CSBAR2 WORD_REF(CSBAR2_ADDR)
+#define CSOR2_ADDR 0xFFFA56
+#define CSOR2 WORD_REF(CSOR2_ADDR)
+#define CSBAR3_ADDR 0xFFFA58
+#define CSBAR3 WORD_REF(CSBAR3_ADDR)
+#define CSOR3_ADDR 0xFFFA5A
+#define CSOR3 WORD_REF(CSOR3_ADDR)
+#define CSBAR4_ADDR 0xFFFA5C
+#define CSBAR4 WORD_REF(CSBAR4_ADDR)
+#define CSOR4_ADDR 0xFFFA5E
+#define CSOR4 WORD_REF(CSOR4_ADDR)
+#define CSBAR5_ADDR 0xFFFA60
+#define CSBAR5 WORD_REF(CSBAR5_ADDR)
+#define CSOR5_ADDR 0xFFFA62
+#define CSOR5 WORD_REF(CSOR5_ADDR)
+#define CSBAR6_ADDR 0xFFFA64
+#define CSBAR6 WORD_REF(CSBAR6_ADDR)
+#define CSOR6_ADDR 0xFFFA66
+#define CSOR6 WORD_REF(CSOR6_ADDR)
+#define CSBAR7_ADDR 0xFFFA68
+#define CSBAR7 WORD_REF(CSBAR7_ADDR)
+#define CSOR7_ADDR 0xFFFA6A
+#define CSOR7 WORD_REF(CSOR7_ADDR)
+#define CSBAR8_ADDR 0xFFFA6C
+#define CSBAR8 WORD_REF(CSBAR8_ADDR)
+#define CSOR8_ADDR 0xFFFA6E
+#define CSOR8 WORD_REF(CSOR8_ADDR)
+#define CSBAR9_ADDR 0xFFFA70
+#define CSBAR9 WORD_REF(CSBAR9_ADDR)
+#define CSOR9_ADDR 0xFFFA72
+#define CSOR9 WORD_REF(CSOR9_ADDR)
+#define CSBAR10_ADDR 0xFFFA74
+#define CSBAR10 WORD_REF(CSBAR10_ADDR)
+#define CSOR10_ADDR 0xFFFA76
+#define CSOR10 WORD_REF(CSOR10_ADDR)
+
+#define CSOR_MODE_ASYNC	0x0000
+#define CSOR_MODE_SYNC	0x8000
+#define CSOR_MODE_MASK	0x8000
+#define CSOR_BYTE_DISABLE	0x0000
+#define CSOR_BYTE_UPPER		0x4000
+#define CSOR_BYTE_LOWER		0x2000
+#define CSOR_BYTE_BOTH		0x6000
+#define CSOR_BYTE_MASK		0x6000
+#define CSOR_RW_RSVD		0x0000
+#define CSOR_RW_READ		0x0800
+#define CSOR_RW_WRITE		0x1000
+#define CSOR_RW_BOTH		0x1800
+#define CSOR_RW_MASK		0x1800
+#define CSOR_STROBE_DS		0x0400
+#define CSOR_STROBE_AS		0x0000
+#define CSOR_STROBE_MASK	0x0400
+#define CSOR_DSACK_WAIT(x)	(wait << 6)
+#define CSOR_DSACK_FTERM	(14 << 6)
+#define CSOR_DSACK_EXTERNAL	(15 << 6)
+#define CSOR_DSACK_MASK		0x03c0
+#define CSOR_SPACE_CPU		0x0000
+#define CSOR_SPACE_USER		0x0010
+#define CSOR_SPACE_SU		0x0020
+#define CSOR_SPACE_BOTH		0x0030
+#define CSOR_SPACE_MASK		0x0030
+#define CSOR_IPL_ALL		0x0000
+#define CSOR_IPL_PRIORITY(x)	(x << 1)
+#define CSOR_IPL_MASK		0x000e
+#define CSOR_AVEC_ON		0x0001
+#define CSOR_AVEC_OFF		0x0000
+#define CSOR_AVEC_MASK		0x0001
+
+#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
+#define CSBAR_ADDR_MASK		0xfff8
+#define CSBAR_BLKSIZE_2K	0x0000
+#define CSBAR_BLKSIZE_8K	0x0001
+#define CSBAR_BLKSIZE_16K	0x0002
+#define CSBAR_BLKSIZE_64K	0x0003
+#define CSBAR_BLKSIZE_128K	0x0004
+#define CSBAR_BLKSIZE_256K	0x0005
+#define CSBAR_BLKSIZE_512K	0x0006
+#define CSBAR_BLKSIZE_1M	0x0007
+#define CSBAR_BLKSIZE_MASK	0x0007
+
+#define CSPAR_DISC	0
+#define CSPAR_ALT	1
+#define CSPAR_CS8	2
+#define CSPAR_CS16	3
+#define CSPAR_MASK	3
+
+#define CSPAR0_CSBOOT(x) (x << 0)
+#define CSPAR0_CS0(x)	(x << 2)
+#define CSPAR0_CS1(x)	(x << 4)
+#define CSPAR0_CS2(x)	(x << 6)
+#define CSPAR0_CS3(x)	(x << 8)
+#define CSPAR0_CS4(x)	(x << 10)
+#define CSPAR0_CS5(x)	(x << 12)
+
+#define CSPAR1_CS6(x)	(x << 0)
+#define CSPAR1_CS7(x)	(x << 2)
+#define CSPAR1_CS8(x)	(x << 4)
+#define CSPAR1_CS9(x)	(x << 6)
+#define CSPAR1_CS10(x)	(x << 8)
+
+#endif
diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h
new file mode 100644
index 00000000000..69b7f9139e5
--- /dev/null
+++ b/arch/m68knommu/include/asm/MC68EZ328.h
@@ -0,0 +1,1253 @@
+
+/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
+ *
+ * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
+ *                     Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ */
+
+#ifndef _MC68EZ328_H_
+#define _MC68EZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR	 LONG_REF(MRR_ADDR)
+
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+ 
+/*
+ * Chip Select Group Base Registers 
+ */
+#define CSGBA_ADDR	0xfffff100
+#define CSGBB_ADDR	0xfffff102
+
+#define CSGBC_ADDR	0xfffff104
+#define CSGBD_ADDR	0xfffff106
+
+#define CSGBA		WORD_REF(CSGBA_ADDR)
+#define CSGBB		WORD_REF(CSGBB_ADDR)
+#define CSGBC		WORD_REF(CSGBC_ADDR)
+#define CSGBD		WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers 
+ */
+#define CSA_ADDR	0xfffff110
+#define CSB_ADDR	0xfffff112
+#define CSC_ADDR	0xfffff114
+#define CSD_ADDR	0xfffff116
+
+#define CSA		WORD_REF(CSA_ADDR)
+#define CSB		WORD_REF(CSB_ADDR)
+#define CSC		WORD_REF(CSC_ADDR)
+#define CSD		WORD_REF(CSD_ADDR)
+
+#define CSA_EN		0x0001		/* Chip-Select Enable */
+#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSA_SIZ_SHIFT   1
+#define CSA_WS_MASK	0x0070		/* Wait State */
+#define CSA_WS_SHIFT    4
+#define CSA_BSW		0x0080		/* Data Bus Width */
+#define CSA_FLASH	0x0100		/* FLASH Memory Support */
+#define CSA_RO		0x8000		/* Read-Only */
+
+#define CSB_EN		0x0001		/* Chip-Select Enable */
+#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSB_SIZ_SHIFT   1
+#define CSB_WS_MASK	0x0070		/* Wait State */
+#define CSB_WS_SHIFT    4
+#define CSB_BSW		0x0080		/* Data Bus Width */
+#define CSB_FLASH	0x0100		/* FLASH Memory Support */
+#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP		0x2000		/* Readonly if protected */
+#define CSB_SOP		0x4000		/* Supervisor only if protected */
+#define CSB_RO		0x8000		/* Read-Only */
+
+#define CSC_EN		0x0001		/* Chip-Select Enable */
+#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSC_SIZ_SHIFT   1
+#define CSC_WS_MASK	0x0070		/* Wait State */
+#define CSC_WS_SHIFT    4
+#define CSC_BSW		0x0080		/* Data Bus Width */
+#define CSC_FLASH	0x0100		/* FLASH Memory Support */
+#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP		0x2000		/* Readonly if protected */
+#define CSC_SOP		0x4000		/* Supervisor only if protected */
+#define CSC_RO		0x8000		/* Read-Only */
+
+#define CSD_EN		0x0001		/* Chip-Select Enable */
+#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSD_SIZ_SHIFT   1
+#define CSD_WS_MASK	0x0070		/* Wait State */
+#define CSD_WS_SHIFT    4
+#define CSD_BSW		0x0080		/* Data Bus Width */
+#define CSD_FLASH	0x0100		/* FLASH Memory Support */
+#define CSD_DRAM	0x0200		/* Dram Selection */
+#define	CSD_COMB	0x0400		/* Combining */
+#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP		0x2000		/* Readonly if protected */
+#define CSD_SOP		0x4000		/* Supervisor only if protected */
+#define CSD_RO		0x8000		/* Read-Only */
+
+/*
+ * Emulation Chip-Select Register 
+ */
+#define EMUCS_ADDR	0xfffff118
+#define EMUCS		WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK	0x0070
+#define EMUCS_WS_SHIFT	4
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for 
+ * request_irq
+ */
+#define SPI_IRQ_NUM	0	/* SPI interrupt */
+#define TMR_IRQ_NUM	1	/* Timer interrupt */
+#define UART_IRQ_NUM	2	/* UART interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM_IRQ_NUM	7	/* Pulse-Width Modulator int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define IRQ5_IRQ_NUM	20	/* IRQ5 */
+#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM	SPI_IRQ_NUM
+#define TMR1_IRQ_NUM	TMR_IRQ_NUM
+
+/* 
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
+#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
+#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM	IMR_MSPI
+#define IMR_MTMR1	IMR_MTMR
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM	ISR_SPI
+#define ISR_TMR1	ISR_TMR
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff30c
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM	IPR_SPI
+#define IPR_TMR1	IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x)		(1 << (x))
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)		(1 << (x))
+
+#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
+#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
+#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
+#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
+#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
+#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
+#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)		(1 << (x))
+
+#define PC_LD0		0x01	/* Use LD0  as PC[0] */
+#define PC_LD1		0x02	/* Use LD1  as PC[1] */
+#define PC_LD2		0x04	/* Use LD2  as PC[2] */
+#define PC_LD3		0x08	/* Use LD3  as PC[3] */
+#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
+#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
+#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
+#define PC_LACD		0x80	/* Use LACD as PC[7] */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define PDSEL		BYTE_REF(PDSEL_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)		(1 << (x))
+
+#define PD_INT0		0x01	/* Use INT0 as PD[0] */
+#define PD_INT1		0x02	/* Use INT1 as PD[1] */
+#define PD_INT2		0x04	/* Use INT2 as PD[2] */
+#define PD_INT3		0x08	/* Use INT3 as PD[3] */
+#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
+#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
+#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
+#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)		(1 << (x))
+
+#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
+#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
+#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
+#define PE_DWE		0x08	/* Use DWE    as PE[3] */
+#define PE_RXD		0x10	/* Use RXD    as PE[4] */
+#define PE_TXD		0x20	/* Use TXD    as PE[5] */
+#define PE_RTS		0x40	/* Use RTS    as PE[6] */
+#define PE_CTS		0x80	/* Use CTS    as PE[7] */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)		(1 << (x))
+
+#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
+#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
+#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
+#define PF_A20          0x08    /* Use A20       as PF[3] */
+#define PF_A21          0x10    /* Use A21       as PF[4] */
+#define PF_A22          0x20    /* Use A22       as PF[5] */
+#define PF_A23          0x40    /* Use A23       as PF[6] */
+#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)		(1 << (x))
+
+#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
+#define PG_A0		0x02	/* Use A0         as PG[1] */
+#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
+#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
+#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
+#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register 
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
+#define PWMC_REPEAT_SHIFT	2
+#define PWMC_EN			0x0010	/* Enable PWM */
+#define PMNC_FIFOAV		0x0020	/* FIFO Available */
+#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
+#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT	8
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN	PWMC_EN
+
+/*
+ * PWM Sample Register 
+ */
+#define PWMS_ADDR	0xfffff502
+#define PWMS		WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff504
+#define PWMP		BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff505
+#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/* 
+ * Timer Control register
+ */
+#define TCTL_ADDR	0xfffff600
+#define TCTL		WORD_REF(TCTL_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR	TCTL_ADDR
+#define TCTL1		TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR	0xfffff602
+#define TPRER		WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR	TPRER_ADDR
+#define TPRER1		TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR	0xfffff604
+#define TCMP		WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR	TCMP_ADDR
+#define TCMP1		TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR	0xfffff606
+#define TCR		WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR	TCR_ADDR
+#define TCR1		TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR	0xfffff608
+#define TCN		WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR	TCN_ADDR
+#define TCN1		TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR	0xfffff60a
+#define TSTAT		WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR	TSTAT_ADDR
+#define TSTAT1		TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
+#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP	0x0200	/* Stop bit transmission */
+#define USTCNT_ODD	0x0400	/* Odd Parity */
+#define	USTCNT_PEN	0x0800	/* Parity Enable */
+#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN	0x4000	/* Receiver Enable */
+#define USTCNT_UEN	0x8000	/* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN	USTCNT_TXAE
+#define USTCNT_TXHALFEN		USTCNT_TXHE
+#define USTCNT_TXEMPTYEN	USTCNT_TXEE
+#define USTCNT_RXREADYEN	USTCNT_RXRE
+#define USTCNT_RXHALFEN		USTCNT_RXHE
+#define USTCNT_RXFULLEN		USTCNT_RXFE
+#define USTCNT_CTSDELTAEN	USTCNT_CTSD
+#define USTCNT_ODD_EVEN		USTCNT_ODD
+#define USTCNT_PARITYEN		USTCNT_PEN
+#define USTCNT_CLKMODE		USTCNT_CLKM
+#define USTCNT_UARTEN		USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STAT	 0x0200	/* CTS State */
+#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
+#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS	UTX_CTS_STAT
+#define UTX_IGNORE_CTS	UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
+
+/* 
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR	0xfffff90a
+#define NIPR		WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT	0
+#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
+#define NIPR_SELECT_SHIFT	8
+#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int nipr;
+  volatile unsigned short int pad1;
+  volatile unsigned short int pad2;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!) 
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define   LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x04
+#define   LPICF_PBSIZ_4    0x08
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+ 
+/*
+ * LCD Refresh Rate Adjustment Register 
+ */
+#define LRRA_ADDR	0xfffffa29
+#define LRRA		BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa33
+#define LGPMR		BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK	0x0f
+#define LGPMR_G1_SHIFT	0
+#define LGPMR_G2_MASK	0xf0
+#define LGPMR_G2_SHIFT	4
+
+/* 
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR	0xfffffa36
+#define PWMR		WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
+#define PWMR_PW_SHIFT	0
+#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
+#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
+#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
+#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
+#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * Watchdog Timer Register 
+ */
+#define WATCHDOG_ADDR	0xfffffb0a
+#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
+#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
+#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL	0x0020	/* Crystal Selection */
+#define RTCCTL_EN	0x0080	/* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384	RTCCTL_XTL
+#define RTCCTL_ENABLE	RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
+#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
+#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
+#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
+#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
+#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
+#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
+#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
+#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
+#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
+#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
+#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
+#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
+#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register 
+ */
+#define DAYR_ADDR	0xfffffb1a
+#define DAYR		WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register 
+ */
+#define DAYALARM_ADDR	0xfffffb1c
+#define DAYALARM	WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 	0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register 
+ */
+#define DRAMMC_ADDR	0xfffffc00
+#define DRAMMC		WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
+#define   DRAMMC_ROW12_PA10	0x0000
+#define   DRAMMC_ROW12_PA21	0x4000	
+#define   DRAMMC_ROW12_PA23	0x8000
+#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
+#define	  DRAMMC_ROW0_PA11	0x0000
+#define   DRAMMC_ROW0_PA22	0x1000
+#define   DRAMMC_ROW0_PA23	0x2000
+#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
+#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
+#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
+#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
+#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
+#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
+#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
+#define DRAMMC_REF_SHIFT	0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR	0xfffffc02
+#define DRAMC		WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
+#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
+#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
+#define DRAMC_SLW	   0x0008	/* Slow RAM */
+#define DRAMC_LSP	   0x0010	/* Light Sleep */
+#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
+#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
+#define DRAMC_WS_SHIFT	   6
+#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT   8
+#define   DRAMC_PGSZ_256K  0x0000	
+#define   DRAMC_PGSZ_512K  0x0100
+#define   DRAMC_PGSZ_1024K 0x0200
+#define	  DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO	   0x0400	/* EDO DRAM */
+#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT	   12
+#define DRAMC_RM	   0x4000	/* Refresh Mode */
+#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR	0xfffffd00
+#define ICEMACR		LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR	0xfffffd04
+#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR	0xfffffd08
+#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
+#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR	0xfffffd0a
+#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
+#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register 
+ */
+#define ICEMCR_ADDR	0xfffffd0c
+#define ICEMCR		WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN	0x0001	/* Compare Enable */
+#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
+#define ICEMCR_SB	0x0004	/* Single Breakpoint */
+#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
+#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register 
+ */
+#define ICEMSR_ADDR	0xfffffd0e
+#define ICEMSR		WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
+#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68EZ328_H_ */
diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h
new file mode 100644
index 00000000000..2b9bf626a0a
--- /dev/null
+++ b/arch/m68knommu/include/asm/MC68VZ328.h
@@ -0,0 +1,1349 @@
+
+/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
+ *
+ * Copyright (c) 2000-2001	Lineo Inc. <www.lineo.com>
+ * Copyright (c) 2000-2001	Lineo Canada Corp. <www.lineo.ca>
+ * Copyright (C) 1999		Vladimir Gurevich <vgurevic@cisco.com>
+ * 				Bare & Hare Software, Inc.
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
+ * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
+ */
+
+#ifndef _MC68VZ328_H_
+#define _MC68VZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR	0xfffff000
+#define SCR		BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8	0x01	/* 8-Bit Width Select */
+#define SCR_DMAP	0x04	/* Double Map */
+#define SCR_SO		0x08	/* Supervisor Only */
+#define SCR_BETEN	0x10	/* Bus-Error Time-Out Enable */
+#define SCR_PRV		0x20	/* Privilege Violation */
+#define SCR_WPV		0x40	/* Write Protect Violation */
+#define SCR_BETO	0x80	/* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR	 LONG_REF(MRR_ADDR)
+
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+ 
+/*
+ * Chip Select Group Base Registers 
+ */
+#define CSGBA_ADDR	0xfffff100
+#define CSGBB_ADDR	0xfffff102
+
+#define CSGBC_ADDR	0xfffff104
+#define CSGBD_ADDR	0xfffff106
+
+#define CSGBA		WORD_REF(CSGBA_ADDR)
+#define CSGBB		WORD_REF(CSGBB_ADDR)
+#define CSGBC		WORD_REF(CSGBC_ADDR)
+#define CSGBD		WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers 
+ */
+#define CSA_ADDR	0xfffff110
+#define CSB_ADDR	0xfffff112
+#define CSC_ADDR	0xfffff114
+#define CSD_ADDR	0xfffff116
+
+#define CSA		WORD_REF(CSA_ADDR)
+#define CSB		WORD_REF(CSB_ADDR)
+#define CSC		WORD_REF(CSC_ADDR)
+#define CSD		WORD_REF(CSD_ADDR)
+
+#define CSA_EN		0x0001		/* Chip-Select Enable */
+#define CSA_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSA_SIZ_SHIFT   1
+#define CSA_WS_MASK	0x0070		/* Wait State */
+#define CSA_WS_SHIFT    4
+#define CSA_BSW		0x0080		/* Data Bus Width */
+#define CSA_FLASH	0x0100		/* FLASH Memory Support */
+#define CSA_RO		0x8000		/* Read-Only */
+
+#define CSB_EN		0x0001		/* Chip-Select Enable */
+#define CSB_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSB_SIZ_SHIFT   1
+#define CSB_WS_MASK	0x0070		/* Wait State */
+#define CSB_WS_SHIFT    4
+#define CSB_BSW		0x0080		/* Data Bus Width */
+#define CSB_FLASH	0x0100		/* FLASH Memory Support */
+#define CSB_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP		0x2000		/* Readonly if protected */
+#define CSB_SOP		0x4000		/* Supervisor only if protected */
+#define CSB_RO		0x8000		/* Read-Only */
+
+#define CSC_EN		0x0001		/* Chip-Select Enable */
+#define CSC_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSC_SIZ_SHIFT   1
+#define CSC_WS_MASK	0x0070		/* Wait State */
+#define CSC_WS_SHIFT    4
+#define CSC_BSW		0x0080		/* Data Bus Width */
+#define CSC_FLASH	0x0100		/* FLASH Memory Support */
+#define CSC_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP		0x2000		/* Readonly if protected */
+#define CSC_SOP		0x4000		/* Supervisor only if protected */
+#define CSC_RO		0x8000		/* Read-Only */
+
+#define CSD_EN		0x0001		/* Chip-Select Enable */
+#define CSD_SIZ_MASK	0x000e		/* Chip-Select Size */
+#define CSD_SIZ_SHIFT   1
+#define CSD_WS_MASK	0x0070		/* Wait State */
+#define CSD_WS_SHIFT    4
+#define CSD_BSW		0x0080		/* Data Bus Width */
+#define CSD_FLASH	0x0100		/* FLASH Memory Support */
+#define CSD_DRAM	0x0200		/* Dram Selection */
+#define	CSD_COMB	0x0400		/* Combining */
+#define CSD_UPSIZ_MASK	0x1800		/* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP		0x2000		/* Readonly if protected */
+#define CSD_SOP		0x4000		/* Supervisor only if protected */
+#define CSD_RO		0x8000		/* Read-Only */
+
+/*
+ * Emulation Chip-Select Register 
+ */
+#define EMUCS_ADDR	0xfffff118
+#define EMUCS		WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK	0x0070
+#define EMUCS_WS_SHIFT	4
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR	0xfffff200
+#define PLLCR		WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL	       0x0008	/* Disable PLL */
+#define PLLCR_CLKEN	       0x0010	/* Clock (CLKO pin) enable */
+#define PLLCR_PRESC	       0x0020	/* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700	/* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK  0x3800	/* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK	PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT	PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR	0xfffff202
+#define PLLFSR		WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK	0x00ff		/* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK	0x0f00		/* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT	0x4000		/* Protect P & Q */
+#define PLLFSR_CLK32	0x8000		/* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR	0xfffff207
+#define PCTRL		BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK	0x1f	/* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT	0
+#define PCTRL_PCEN		0x80	/* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR	0xfffff300
+#define IVR		BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR	0xfffff302
+#define ICR		WORD_REF(ICR_ADDR)
+
+#define ICR_POL5	0x0080	/* Polarity Control for IRQ5 */
+#define ICR_ET6		0x0100	/* Edge Trigger Select for IRQ6 */
+#define ICR_ET3		0x0200	/* Edge Trigger Select for IRQ3 */
+#define ICR_ET2		0x0400	/* Edge Trigger Select for IRQ2 */
+#define ICR_ET1		0x0800	/* Edge Trigger Select for IRQ1 */
+#define ICR_POL6	0x1000	/* Polarity Control for IRQ6 */
+#define ICR_POL3	0x2000	/* Polarity Control for IRQ3 */
+#define ICR_POL2	0x4000	/* Polarity Control for IRQ2 */
+#define ICR_POL1	0x8000	/* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR	0xfffff304
+#define IMR		LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for 
+ * request_irq
+ */
+#define SPI2_IRQ_NUM	0	/* SPI 2 interrupt */
+#define TMR_IRQ_NUM	1	/* Timer 1 interrupt */
+#define UART1_IRQ_NUM	2	/* UART 1 interrupt */	
+#define	WDT_IRQ_NUM	3	/* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM	4	/* RTC interrupt */
+#define TMR2_IRQ_NUM	5	/* Timer 2 interrupt */
+#define	KB_IRQ_NUM	6	/* Keyboard Interrupt */
+#define PWM1_IRQ_NUM	7	/* Pulse-Width Modulator 1 int. */
+#define	INT0_IRQ_NUM	8	/* External INT0 */
+#define	INT1_IRQ_NUM	9	/* External INT1 */
+#define	INT2_IRQ_NUM	10	/* External INT2 */
+#define	INT3_IRQ_NUM	11	/* External INT3 */
+#define UART2_IRQ_NUM	12	/* UART 2 interrupt */	
+#define PWM2_IRQ_NUM	13	/* Pulse-Width Modulator 1 int. */
+#define IRQ1_IRQ_NUM	16	/* IRQ1 */
+#define IRQ2_IRQ_NUM	17	/* IRQ2 */
+#define IRQ3_IRQ_NUM	18	/* IRQ3 */
+#define IRQ6_IRQ_NUM	19	/* IRQ6 */
+#define IRQ5_IRQ_NUM	20	/* IRQ5 */
+#define SPI1_IRQ_NUM	21	/* SPI 1 interrupt */
+#define SAM_IRQ_NUM	22	/* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM	23	/* Emulator Interrupt */
+
+#define SPI_IRQ_NUM	SPI2_IRQ_NUM
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM	SPI_IRQ_NUM
+#define TMR1_IRQ_NUM	TMR_IRQ_NUM
+#define UART_IRQ_NUM	UART1_IRQ_NUM
+
+/* 
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI 	(1 << SPI_IRQ_NUM)	/* Mask SPI interrupt */
+#define	IMR_MTMR	(1 << TMR_IRQ_NUM)	/* Mask Timer interrupt */
+#define IMR_MUART	(1 << UART_IRQ_NUM)	/* Mask UART interrupt */	
+#define	IMR_MWDT	(1 << WDT_IRQ_NUM)	/* Mask Watchdog Timer interrupt */
+#define IMR_MRTC	(1 << RTC_IRQ_NUM)	/* Mask RTC interrupt */
+#define	IMR_MKB		(1 << KB_IRQ_NUM)	/* Mask Keyboard Interrupt */
+#define IMR_MPWM	(1 << PWM_IRQ_NUM)	/* Mask Pulse-Width Modulator int. */
+#define	IMR_MINT0	(1 << INT0_IRQ_NUM)	/* Mask External INT0 */
+#define	IMR_MINT1	(1 << INT1_IRQ_NUM)	/* Mask External INT1 */
+#define	IMR_MINT2	(1 << INT2_IRQ_NUM)	/* Mask External INT2 */
+#define	IMR_MINT3	(1 << INT3_IRQ_NUM)	/* Mask External INT3 */
+#define IMR_MIRQ1	(1 << IRQ1_IRQ_NUM)	/* Mask IRQ1 */
+#define IMR_MIRQ2	(1 << IRQ2_IRQ_NUM)	/* Mask IRQ2 */
+#define IMR_MIRQ3	(1 << IRQ3_IRQ_NUM)	/* Mask IRQ3 */
+#define IMR_MIRQ6	(1 << IRQ6_IRQ_NUM)	/* Mask IRQ6 */
+#define IMR_MIRQ5	(1 << IRQ5_IRQ_NUM)	/* Mask IRQ5 */
+#define IMR_MSAM	(1 << SAM_IRQ_NUM)	/* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ	(1 << EMIQ_IRQ_NUM)	/* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM	IMR_MSPI
+#define IMR_MTMR1	IMR_MTMR
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR	0xfffff30c
+#define ISR		LONG_REF(ISR_ADDR)
+
+#define ISR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	ISR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define ISR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	ISR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define ISR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	ISR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define ISR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	ISR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	ISR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	ISR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	ISR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define ISR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define ISR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define ISR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define ISR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define ISR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define ISR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define ISR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM	ISR_SPI
+#define ISR_TMR1	ISR_TMR
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR	0xfffff30c
+#define IPR		LONG_REF(IPR_ADDR)
+
+#define IPR_SPI 	(1 << SPI_IRQ_NUM)	/* SPI interrupt */
+#define	IPR_TMR		(1 << TMR_IRQ_NUM)	/* Timer interrupt */
+#define IPR_UART	(1 << UART_IRQ_NUM)	/* UART interrupt */	
+#define	IPR_WDT		(1 << WDT_IRQ_NUM)	/* Watchdog Timer interrupt */
+#define IPR_RTC		(1 << RTC_IRQ_NUM)	/* RTC interrupt */
+#define	IPR_KB		(1 << KB_IRQ_NUM)	/* Keyboard Interrupt */
+#define IPR_PWM		(1 << PWM_IRQ_NUM)	/* Pulse-Width Modulator interrupt */
+#define	IPR_INT0	(1 << INT0_IRQ_NUM)	/* External INT0 */
+#define	IPR_INT1	(1 << INT1_IRQ_NUM)	/* External INT1 */
+#define	IPR_INT2	(1 << INT2_IRQ_NUM)	/* External INT2 */
+#define	IPR_INT3	(1 << INT3_IRQ_NUM)	/* External INT3 */
+#define IPR_IRQ1	(1 << IRQ1_IRQ_NUM)	/* IRQ1 */
+#define IPR_IRQ2	(1 << IRQ2_IRQ_NUM)	/* IRQ2 */
+#define IPR_IRQ3	(1 << IRQ3_IRQ_NUM)	/* IRQ3 */
+#define IPR_IRQ6	(1 << IRQ6_IRQ_NUM)	/* IRQ6 */
+#define IPR_IRQ5	(1 << IRQ5_IRQ_NUM)	/* IRQ5 */
+#define IPR_SAM		(1 << SAM_IRQ_NUM)	/* Sampling Timer for RTC */
+#define IPR_EMIQ	(1 << EMIQ_IRQ_NUM)	/* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM	IPR_SPI
+#define IPR_TMR1	IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR	0xfffff400		/* Port A direction reg */
+#define PADATA_ADDR	0xfffff401		/* Port A data register */
+#define PAPUEN_ADDR	0xfffff402		/* Port A Pull-Up enable reg */
+
+#define PADIR		BYTE_REF(PADIR_ADDR)
+#define PADATA		BYTE_REF(PADATA_ADDR)
+#define PAPUEN		BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x)		(1 << (x))
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR	0xfffff408		/* Port B direction reg */
+#define PBDATA_ADDR	0xfffff409		/* Port B data register */
+#define PBPUEN_ADDR	0xfffff40a		/* Port B Pull-Up enable reg */
+#define PBSEL_ADDR	0xfffff40b		/* Port B Select Register */
+
+#define PBDIR		BYTE_REF(PBDIR_ADDR)
+#define PBDATA		BYTE_REF(PBDATA_ADDR)
+#define PBPUEN		BYTE_REF(PBPUEN_ADDR)
+#define PBSEL		BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)		(1 << (x))
+
+#define PB_CSB0		0x01	/* Use CSB0      as PB[0] */
+#define PB_CSB1		0x02	/* Use CSB1      as PB[1] */
+#define PB_CSC0_RAS0	0x04    /* Use CSC0/RAS0 as PB[2] */	
+#define PB_CSC1_RAS1	0x08    /* Use CSC1/RAS1 as PB[3] */	
+#define PB_CSD0_CAS0	0x10    /* Use CSD0/CAS0 as PB[4] */	
+#define PB_CSD1_CAS1	0x20    /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT	0x40	/* Use TIN/TOUT  as PB[6] */
+#define PB_PWMO		0x80	/* Use PWMO      as PB[7] */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR	0xfffff410		/* Port C direction reg */
+#define PCDATA_ADDR	0xfffff411		/* Port C data register */
+#define PCPDEN_ADDR	0xfffff412		/* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR	0xfffff413		/* Port C Select Register */
+
+#define PCDIR		BYTE_REF(PCDIR_ADDR)
+#define PCDATA		BYTE_REF(PCDATA_ADDR)
+#define PCPDEN		BYTE_REF(PCPDEN_ADDR)
+#define PCSEL		BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)		(1 << (x))
+
+#define PC_LD0		0x01	/* Use LD0  as PC[0] */
+#define PC_LD1		0x02	/* Use LD1  as PC[1] */
+#define PC_LD2		0x04	/* Use LD2  as PC[2] */
+#define PC_LD3		0x08	/* Use LD3  as PC[3] */
+#define PC_LFLM		0x10	/* Use LFLM as PC[4] */
+#define PC_LLP 		0x20	/* Use LLP  as PC[5] */
+#define PC_LCLK		0x40	/* Use LCLK as PC[6] */
+#define PC_LACD		0x80	/* Use LACD as PC[7] */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR	0xfffff418		/* Port D direction reg */
+#define PDDATA_ADDR	0xfffff419		/* Port D data register */
+#define PDPUEN_ADDR	0xfffff41a		/* Port D Pull-Up enable reg */
+#define PDSEL_ADDR	0xfffff41b		/* Port D Select Register */
+#define PDPOL_ADDR	0xfffff41c		/* Port D Polarity Register */
+#define PDIRQEN_ADDR	0xfffff41d		/* Port D IRQ enable register */
+#define PDKBEN_ADDR	0xfffff41e		/* Port D Keyboard Enable reg */
+#define	PDIQEG_ADDR	0xfffff41f		/* Port D IRQ Edge Register */
+
+#define PDDIR		BYTE_REF(PDDIR_ADDR)
+#define PDDATA		BYTE_REF(PDDATA_ADDR)
+#define PDPUEN		BYTE_REF(PDPUEN_ADDR)
+#define PDSEL		BYTE_REF(PDSEL_ADDR)
+#define	PDPOL		BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN		BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN		BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG		BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)		(1 << (x))
+
+#define PD_INT0		0x01	/* Use INT0 as PD[0] */
+#define PD_INT1		0x02	/* Use INT1 as PD[1] */
+#define PD_INT2		0x04	/* Use INT2 as PD[2] */
+#define PD_INT3		0x08	/* Use INT3 as PD[3] */
+#define PD_IRQ1		0x10	/* Use IRQ1 as PD[4] */
+#define PD_IRQ2		0x20	/* Use IRQ2 as PD[5] */
+#define PD_IRQ3		0x40	/* Use IRQ3 as PD[6] */
+#define PD_IRQ6		0x80	/* Use IRQ6 as PD[7] */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR	0xfffff420		/* Port E direction reg */
+#define PEDATA_ADDR	0xfffff421		/* Port E data register */
+#define PEPUEN_ADDR	0xfffff422		/* Port E Pull-Up enable reg */
+#define PESEL_ADDR	0xfffff423		/* Port E Select Register */
+
+#define PEDIR		BYTE_REF(PEDIR_ADDR)
+#define PEDATA		BYTE_REF(PEDATA_ADDR)
+#define PEPUEN		BYTE_REF(PEPUEN_ADDR)
+#define PESEL		BYTE_REF(PESEL_ADDR)
+
+#define PE(x)		(1 << (x))
+
+#define PE_SPMTXD	0x01	/* Use SPMTXD as PE[0] */
+#define PE_SPMRXD	0x02	/* Use SPMRXD as PE[1] */
+#define PE_SPMCLK	0x04	/* Use SPMCLK as PE[2] */
+#define PE_DWE		0x08	/* Use DWE    as PE[3] */
+#define PE_RXD		0x10	/* Use RXD    as PE[4] */
+#define PE_TXD		0x20	/* Use TXD    as PE[5] */
+#define PE_RTS		0x40	/* Use RTS    as PE[6] */
+#define PE_CTS		0x80	/* Use CTS    as PE[7] */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR	0xfffff428		/* Port F direction reg */
+#define PFDATA_ADDR	0xfffff429		/* Port F data register */
+#define PFPUEN_ADDR	0xfffff42a		/* Port F Pull-Up enable reg */
+#define PFSEL_ADDR	0xfffff42b		/* Port F Select Register */
+
+#define PFDIR		BYTE_REF(PFDIR_ADDR)
+#define PFDATA		BYTE_REF(PFDATA_ADDR)
+#define PFPUEN		BYTE_REF(PFPUEN_ADDR)
+#define PFSEL		BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)		(1 << (x))
+
+#define PF_LCONTRAST	0x01	/* Use LCONTRAST as PF[0] */
+#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
+#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
+#define PF_A20          0x08    /* Use A20       as PF[3] */
+#define PF_A21          0x10    /* Use A21       as PF[4] */
+#define PF_A22          0x20    /* Use A22       as PF[5] */
+#define PF_A23          0x40    /* Use A23       as PF[6] */
+#define PF_CSA1		0x80    /* Use CSA1      as PF[7] */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR	0xfffff430		/* Port G direction reg */
+#define PGDATA_ADDR	0xfffff431		/* Port G data register */
+#define PGPUEN_ADDR	0xfffff432		/* Port G Pull-Up enable reg */
+#define PGSEL_ADDR	0xfffff433		/* Port G Select Register */
+
+#define PGDIR		BYTE_REF(PGDIR_ADDR)
+#define PGDATA		BYTE_REF(PGDATA_ADDR)
+#define PGPUEN		BYTE_REF(PGPUEN_ADDR)
+#define PGSEL		BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)		(1 << (x))
+
+#define PG_BUSW_DTACK	0x01	/* Use BUSW/DTACK as PG[0] */
+#define PG_A0		0x02	/* Use A0         as PG[1] */
+#define PG_EMUIRQ	0x04	/* Use EMUIRQ     as PG[2] */
+#define PG_HIZ_P_D	0x08	/* Use HIZ/P/D    as PG[3] */
+#define PG_EMUCS        0x10	/* Use EMUCS      as PG[4] */
+#define PG_EMUBRK	0x20	/* Use EMUBRK     as PG[5] */
+
+/* 
+ * Port J
+ */
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enb. reg */
+#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)		(1 << (x))
+
+/*
+ * Port K
+ */
+#define PKDIR_ADDR	0xfffff440		/* Port K direction reg */
+#define PKDATA_ADDR	0xfffff441		/* Port K data register */
+#define PKPUEN_ADDR	0xfffff442		/* Port K Pull-Up enb. reg */
+#define PKSEL_ADDR	0xfffff443		/* Port K Select Register */
+
+#define PKDIR		BYTE_REF(PKDIR_ADDR)
+#define PKDATA		BYTE_REF(PKDATA_ADDR)
+#define PKPUEN		BYTE_REF(PKPUEN_ADDR)
+#define PKSEL		BYTE_REF(PKSEL_ADDR)
+
+#define PK(x)		(1 << (x))
+
+#define PK_DATAREADY		0x01	/* Use ~DATA_READY  as PK[0] */
+#define PK_PWM2		0x01	/* Use PWM2  as PK[0] */
+#define PK_R_W		0x02	/* Use R/W  as PK[1] */
+#define PK_LDS		0x04	/* Use /LDS  as PK[2] */
+#define PK_UDS		0x08	/* Use /UDS  as PK[3] */
+#define PK_LD4		0x10	/* Use LD4 as PK[4] */
+#define PK_LD5 		0x20	/* Use LD5  as PK[5] */
+#define PK_LD6		0x40	/* Use LD6 as PK[6] */
+#define PK_LD7		0x80	/* Use LD7 as PK[7] */
+
+#define PJDIR_ADDR	0xfffff438		/* Port J direction reg */
+#define PJDATA_ADDR	0xfffff439		/* Port J data register */
+#define PJPUEN_ADDR	0xfffff43A		/* Port J Pull-Up enable reg */
+#define PJSEL_ADDR	0xfffff43B		/* Port J Select Register */
+
+#define PJDIR		BYTE_REF(PJDIR_ADDR)
+#define PJDATA		BYTE_REF(PJDATA_ADDR)
+#define PJPUEN		BYTE_REF(PJPUEN_ADDR)
+#define PJSEL		BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)		(1 << (x))
+
+#define PJ_MOSI 	0x01	/* Use MOSI       as PJ[0] */
+#define PJ_MISO		0x02	/* Use MISO       as PJ[1] */
+#define PJ_SPICLK1  	0x04	/* Use SPICLK1    as PJ[2] */
+#define PJ_SS   	0x08	/* Use SS         as PJ[3] */
+#define PJ_RXD2         0x10	/* Use RXD2       as PJ[4] */
+#define PJ_TXD2  	0x20	/* Use TXD2       as PJ[5] */
+#define PJ_RTS2  	0x40	/* Use RTS2       as PJ[5] */
+#define PJ_CTS2  	0x80	/* Use CTS2       as PJ[5] */
+
+/*
+ * Port M
+ */
+#define PMDIR_ADDR	0xfffff448		/* Port M direction reg */
+#define PMDATA_ADDR	0xfffff449		/* Port M data register */
+#define PMPUEN_ADDR	0xfffff44a		/* Port M Pull-Up enable reg */
+#define PMSEL_ADDR	0xfffff44b		/* Port M Select Register */
+
+#define PMDIR		BYTE_REF(PMDIR_ADDR)
+#define PMDATA		BYTE_REF(PMDATA_ADDR)
+#define PMPUEN		BYTE_REF(PMPUEN_ADDR)
+#define PMSEL		BYTE_REF(PMSEL_ADDR)
+
+#define PM(x)		(1 << (x))
+
+#define PM_SDCLK	0x01	/* Use SDCLK      as PM[0] */
+#define PM_SDCE		0x02	/* Use SDCE       as PM[1] */
+#define PM_DQMH 	0x04	/* Use DQMH       as PM[2] */
+#define PM_DQML 	0x08	/* Use DQML       as PM[3] */
+#define PM_SDA10        0x10	/* Use SDA10      as PM[4] */
+#define PM_DMOE 	0x20	/* Use DMOE       as PM[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR	0xfffff500
+#define PWMC		WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK	0x0003	/* Clock Selection */
+#define PWMC_CLKSEL_SHIFT	0
+#define PWMC_REPEAT_MASK	0x000c	/* Sample Repeats */
+#define PWMC_REPEAT_SHIFT	2
+#define PWMC_EN			0x0010	/* Enable PWM */
+#define PMNC_FIFOAV		0x0020	/* FIFO Available */
+#define PWMC_IRQEN		0x0040	/* Interrupt Request Enable */
+#define PWMC_IRQ		0x0080	/* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK	0x7f00	/* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT	8
+#define PWMC_CLKSRC		0x8000	/* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN	PWMC_EN
+
+/*
+ * PWM Sample Register 
+ */
+#define PWMS_ADDR	0xfffff502
+#define PWMS		WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR	0xfffff504
+#define PWMP		BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR	0xfffff505
+#define PWMCNT		BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/* 
+ * Timer Control register
+ */
+#define TCTL_ADDR	0xfffff600
+#define TCTL		WORD_REF(TCTL_ADDR)
+
+#define	TCTL_TEN		0x0001	/* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK 	0x000e	/* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP	   0x0000	/* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK	   0x0002	/* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004	/* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN	   0x0006	/* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ	   0x0008	/* 32kHz clock to prescaler */
+#define TCTL_IRQEN		0x0010	/* IRQ Enable    */
+#define TCTL_OM			0x0020	/* Output Mode   */
+#define TCTL_CAP_MASK		0x00c0	/* Capture Edge: */
+#define	  TCTL_CAP_RE		0x0040		/* Capture on rizing edge   */
+#define   TCTL_CAP_FE		0x0080		/* Capture on falling edge  */
+#define TCTL_FRR		0x0010	/* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR	TCTL_ADDR
+#define TCTL1		TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR	0xfffff602
+#define TPRER		WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR	TPRER_ADDR
+#define TPRER1		TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR	0xfffff604
+#define TCMP		WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR	TCMP_ADDR
+#define TCMP1		TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR	0xfffff606
+#define TCR		WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR	TCR_ADDR
+#define TCR1		TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR	0xfffff608
+#define TCN		WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR	TCN_ADDR
+#define TCN1		TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR	0xfffff60a
+#define TSTAT		WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP	0x0001		/* Compare Event occurred */
+#define TSTAT_CAPT	0x0001		/* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR	TSTAT_ADDR
+#define TSTAT1		TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR	0xfffff800
+#define SPIMDATA	WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR	0xfffff802
+#define SPIMCONT	WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK	 0x000f	/* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL		 0x0010	/* SPMCLK Signel Polarity */
+#define	SPIMCONT_PHA		 0x0020	/* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN		 0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ		 0x0080	/* Interrupt Request */
+#define SPIMCONT_XCH		 0x0100	/* Exchange */
+#define SPIMCONT_ENABLE		 0x0200	/* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK	 0xe000	/* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ	SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN		SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+
+#define USTCNT_ADDR	0xfffff900
+#define USTCNT		WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE	0x0001	/* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE	0x0002	/* Transmitter Half Empty Enable */
+#define USTCNT_TXEE	0x0004	/* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE	0x0008	/* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE	0x0010	/* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE	0x0020	/* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD	0x0040	/* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN	0x0080	/* Old Data Interrupt Enable */
+#define USTCNT_8_7	0x0100	/* Eight or seven-bit transmission */
+#define USTCNT_STOP	0x0200	/* Stop bit transmission */
+#define USTCNT_ODD	0x0400	/* Odd Parity */
+#define	USTCNT_PEN	0x0800	/* Parity Enable */
+#define USTCNT_CLKM	0x1000	/* Clock Mode Select */
+#define	USTCNT_TXEN	0x2000	/* Transmitter Enable */
+#define USTCNT_RXEN	0x4000	/* Receiver Enable */
+#define USTCNT_UEN	0x8000	/* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN	USTCNT_TXAE
+#define USTCNT_TXHALFEN		USTCNT_TXHE
+#define USTCNT_TXEMPTYEN	USTCNT_TXEE
+#define USTCNT_RXREADYEN	USTCNT_RXRE
+#define USTCNT_RXHALFEN		USTCNT_RXHE
+#define USTCNT_RXFULLEN		USTCNT_RXFE
+#define USTCNT_CTSDELTAEN	USTCNT_CTSD
+#define USTCNT_ODD_EVEN		USTCNT_ODD
+#define USTCNT_PARITYEN		USTCNT_PEN
+#define USTCNT_CLKMODE		USTCNT_CLKM
+#define USTCNT_UARTEN		USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR	0xfffff902
+#define UBAUD		WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT	0
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT	8
+#define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
+#define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR	0xfffff904
+#define URX		WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR	0xfffff905
+#define URX_RXDATA	BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK	 0x00ff	/* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100	/* Parity Error */
+#define URX_BREAK	 0x0200	/* Break Detected */
+#define URX_FRAME_ERROR	 0x0400	/* Framing Error */
+#define URX_OVRUN	 0x0800	/* Serial Overrun */
+#define URX_OLD_DATA	 0x1000	/* Old data in FIFO */
+#define URX_DATA_READY	 0x2000	/* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF	 0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL	 0x8000	/* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR	0xfffff906
+#define UTX		WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR	0xfffff907
+#define UTX_TXDATA	BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK	 0x00ff	/* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA	 0x0100	/* CTS changed */
+#define UTX_CTS_STAT	 0x0200	/* CTS State */
+#define	UTX_BUSY	 0x0400	/* FIFO is busy, sending a character */
+#define	UTX_NOCTS	 0x0800	/* Ignore CTS */
+#define UTX_SEND_BREAK	 0x1000	/* Send a BREAK */
+#define UTX_TX_AVAIL	 0x2000	/* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF	 0x4000	/* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY	 0x8000	/* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS	UTX_CTS_STAT
+#define UTX_IGNORE_CTS	UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR	0xfffff908
+#define UMISC		WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL	 0x0004	/* Transmit Polarity */
+#define UMISC_RX_POL	 0x0008	/* Receive Polarity */
+#define UMISC_IRDA_LOOP	 0x0010	/* IrDA Loopback Enable */
+#define UMISC_IRDA_EN	 0x0020	/* Infra-Red Enable */
+#define UMISC_RTS	 0x0040	/* Set RTS status */
+#define UMISC_RTSCONT	 0x0080	/* Choose RTS control */
+#define UMISC_IR_TEST	 0x0400	/* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800	/* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP	 0x1000	/* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000	/* Force Parity Error */
+#define UMISC_CLKSRC	 0x4000	/* Clock Source */
+#define UMISC_BAUD_TEST	 0x8000	/* Enable Baud Test Mode */
+
+/* 
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR	0xfffff90a
+#define NIPR		WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK	0x00ff	/* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT	0
+#define NIPR_SELECT_MASK	0x0700	/* Tap Selection */
+#define NIPR_SELECT_SHIFT	8
+#define NIPR_PRE_SEL		0x8000	/* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int nipr;
+  volatile unsigned short int hmark;
+  volatile unsigned short int unused;
+} __attribute__((packed)) m68328_uart;
+
+
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR	0xfffffa00
+#define LSSA		LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK	0x1ffffffe	/* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR	0xfffffa05
+#define LVPW		BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!) 
+ */
+#define LXMAX_ADDR	0xfffffa08
+#define LXMAX		WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK	0x02f0		/* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR	0xfffffa0a
+#define LYMAX		WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK	0x01ff		/* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR	0xfffffa18
+#define LCXP		WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK	0xc000		/* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT	0x0000
+#define   LCXP_CC_BLACK		0x4000
+#define   LCXP_CC_REVERSED	0x8000
+#define   LCXP_CC_WHITE		0xc000
+#define LCXP_CXP_MASK	0x02ff		/* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR	0xfffffa1a
+#define LCYP		WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK	0x01ff		/* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR	0xfffffa1c
+#define LCWCH		WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK	0x001f		/* Cursor Height */
+#define LCWCH_CH_SHIFT	0
+#define LCWCH_CW_MASK	0x1f00		/* Cursor Width */
+#define LCWCH_CW_SHIFT	8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR	0xfffffa1f
+#define LBLKC		BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK	0x7f	/* Blink Divisor */
+#define LBLKC_BD_SHIFT	0
+#define LBLKC_BKEN	0x80	/* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR	0xfffffa20
+#define LPICF		BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK	 0x03	 /* Gray-Scale Mode */
+#define	  LPICF_GS_BW	   0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define   LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c	/* Panel Bus Width */
+#define   LPICF_PBSIZ_1	   0x00
+#define   LPICF_PBSIZ_2    0x04
+#define   LPICF_PBSIZ_4    0x08
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR	0xfffffa21
+#define LPOLCF		BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL	0x01	/* Pixel Polarity */
+#define LPOLCF_LPPOL	0x02	/* Line Pulse Polarity */
+#define LPOLCF_FLMPOL	0x04	/* Frame Marker Polarity */
+#define LPOLCF_LCKPOL	0x08	/* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR	0xfffffa23
+#define LACDRC		BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT	 0x80	/* Signal Source Select */
+#define LACDRC_ACD_MASK	 0x0f	/* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR	0xfffffa25
+#define LPXCD		BYTE_REF(LPXCD_ADDR)
+
+#define	LPXCD_PCD_MASK	0x3f 	/* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT	0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR	0xfffffa27
+#define LCKCON		BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK	 0x0f	/* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH	 0x40	/* Display Memory Width  */
+#define LCKCON_LCDON	 0x80	/* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+ 
+/*
+ * LCD Refresh Rate Adjustment Register 
+ */
+#define LRRA_ADDR	0xfffffa29
+#define LRRA		BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR	0xfffffa2d
+#define LPOSR		BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK	0x0f	/* Pixel Offset Code */
+#define LPOSR_POS_SHIFT	0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR	0xfffffa31
+#define LFRCM		BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK	 0x0f	/* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK	 0xf0	/* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR	0xfffffa33
+#define LGPMR		BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK	0x0f
+#define LGPMR_G1_SHIFT	0
+#define LGPMR_G2_MASK	0xf0
+#define LGPMR_G2_SHIFT	4
+
+/* 
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR	0xfffffa36
+#define PWMR		WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK	0x00ff	/* Pulse Width */
+#define PWMR_PW_SHIFT	0
+#define PWMR_CCPEN	0x0100	/* Contrast Control Enable */
+#define PWMR_SRC_MASK	0x0600	/* Input Clock Source */
+#define   PWMR_SRC_LINE	  0x0000	/* Line Pulse  */
+#define   PWMR_SRC_PIXEL  0x0200	/* Pixel Clock */
+#define   PWMR_SRC_LCD    0x4000	/* LCD clock   */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR	0xfffffb00
+#define RTCTIME		LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK	0x0000003f	/* Seconds */
+#define RTCTIME_SECONDS_SHIFT	0
+#define RTCTIME_MINUTES_MASK	0x003f0000	/* Minutes */
+#define RTCTIME_MINUTES_SHIFT	16
+#define RTCTIME_HOURS_MASK	0x1f000000	/* Hours */
+#define RTCTIME_HOURS_SHIFT	24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * Watchdog Timer Register 
+ */
+#define WATCHDOG_ADDR	0xfffffb0a
+#define WATCHDOG	WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN	0x0001	/* Watchdog Enabled */
+#define WATCHDOG_ISEL	0x0002	/* Select the watchdog interrupt */
+#define WATCHDOG_INTF	0x0080	/* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK  0x0300	/* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR	0xfffffb0c
+#define RTCCTL		WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL	0x0020	/* Crystal Selection */
+#define RTCCTL_EN	0x0080	/* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384	RTCCTL_XTL
+#define RTCCTL_ENABLE	RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR	0xfffffb0e
+#define RTCISR		WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW	0x0001	/* Stopwatch timed out */
+#define RTCISR_MIN	0x0002	/* 1-minute interrupt has occurred */
+#define RTCISR_ALM	0x0004	/* Alarm interrupt has occurred */
+#define RTCISR_DAY	0x0008	/* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ	0x0010	/* 1Hz interrupt has occurred */
+#define RTCISR_HR	0x0020	/* 1-hour interrupt has occurred */
+#define RTCISR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt has occurred */ 
+#define RTCISR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt has occurred */ 
+#define RTCISR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt has occurred */ 
+#define RTCISR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt has occurred */ 
+#define RTCISR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt has occurred */ 
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR	0xfffffb10
+#define RTCIENR		WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW	0x0001	/* Stopwatch interrupt enable */
+#define RTCIENR_MIN	0x0002	/* 1-minute interrupt enable */
+#define RTCIENR_ALM	0x0004	/* Alarm interrupt enable */
+#define RTCIENR_DAY	0x0008	/* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ	0x0010	/* 1Hz interrupt enable */
+#define RTCIENR_HR	0x0020	/* 1-hour interrupt enable */
+#define RTCIENR_SAM0	0x0100	/*   4Hz /   4.6875Hz interrupt enable */ 
+#define RTCIENR_SAM1	0x0200	/*   8Hz /   9.3750Hz interrupt enable */ 
+#define RTCIENR_SAM2	0x0400	/*  16Hz /  18.7500Hz interrupt enable */ 
+#define RTCIENR_SAM3	0x0800	/*  32Hz /  37.5000Hz interrupt enable */ 
+#define RTCIENR_SAM4	0x1000	/*  64Hz /  75.0000Hz interrupt enable */ 
+#define RTCIENR_SAM5	0x2000	/* 128Hz / 150.0000Hz interrupt enable */ 
+#define RTCIENR_SAM6	0x4000	/* 256Hz / 300.0000Hz interrupt enable */ 
+#define RTCIENR_SAM7	0x8000	/* 512Hz / 600.0000Hz interrupt enable */ 
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR	0xfffffb12
+#define STPWCH		WORD_REF(STPWCH_ADDR)
+
+#define STPWCH_CNT_MASK	 0x003f	/* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register 
+ */
+#define DAYR_ADDR	0xfffffb1a
+#define DAYR		WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK	0x1ff	/* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register 
+ */
+#define DAYALARM_ADDR	0xfffffb1c
+#define DAYALARM	WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK	0x01ff	/* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT 	0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register 
+ */
+#define DRAMMC_ADDR	0xfffffc00
+#define DRAMMC		WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK	0xc000	/* Row address bit for MD12 */
+#define   DRAMMC_ROW12_PA10	0x0000
+#define   DRAMMC_ROW12_PA21	0x4000	
+#define   DRAMMC_ROW12_PA23	0x8000
+#define	DRAMMC_ROW0_MASK	0x3000	/* Row address bit for MD0 */
+#define	  DRAMMC_ROW0_PA11	0x0000
+#define   DRAMMC_ROW0_PA22	0x1000
+#define   DRAMMC_ROW0_PA23	0x2000
+#define DRAMMC_ROW11		0x0800	/* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10		0x0400	/* Row address bit for MD10 PA19/PA21 */
+#define	DRAMMC_ROW9		0x0200	/* Row address bit for MD9  PA9/PA19  */
+#define DRAMMC_ROW8		0x0100	/* Row address bit for MD8  PA10/PA20 */
+#define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
+#define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
+#define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
+#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
+#define DRAMMC_REF_SHIFT	0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR	0xfffffc02
+#define DRAMC		WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE	   0x0001	/* DRAM Write Enable */
+#define DRAMC_RST	   0x0002	/* Reset Burst Refresh Enable */
+#define DRAMC_LPR	   0x0004	/* Low-Power Refresh Enable */
+#define DRAMC_SLW	   0x0008	/* Slow RAM */
+#define DRAMC_LSP	   0x0010	/* Light Sleep */
+#define DRAMC_MSW	   0x0020	/* Slow Multiplexing */
+#define DRAMC_WS_MASK	   0x00c0	/* Wait-states */
+#define DRAMC_WS_SHIFT	   6
+#define DRAMC_PGSZ_MASK    0x0300	/* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT   8
+#define   DRAMC_PGSZ_256K  0x0000	
+#define   DRAMC_PGSZ_512K  0x0100
+#define   DRAMC_PGSZ_1024K 0x0200
+#define	  DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO	   0x0400	/* EDO DRAM */
+#define DRAMC_CLK	   0x0800	/* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK	   0x3000	/* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT	   12
+#define DRAMC_RM	   0x4000	/* Refresh Mode */
+#define DRAMC_EN	   0x8000	/* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR	0xfffffd00
+#define ICEMACR		LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR	0xfffffd04
+#define ICEMAMR		LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR	0xfffffd08
+#define ICEMCCR		WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD	0x0001	/* Program/Data Cycle Selection */
+#define ICEMCCR_RW	0x0002	/* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR	0xfffffd0a
+#define ICEMCMR		WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM	0x0001	/* Program/Data Cycle Mask */
+#define ICEMCMR_RWM	0x0002	/* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register 
+ */
+#define ICEMCR_ADDR	0xfffffd0c
+#define ICEMCR		WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN	0x0001	/* Compare Enable */
+#define ICEMCR_PBEN	0x0002	/* Program Break Enable */
+#define ICEMCR_SB	0x0004	/* Single Breakpoint */
+#define ICEMCR_HMDIS	0x0008	/* HardMap disable */
+#define ICEMCR_BBIEN	0x0010	/* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register 
+ */
+#define ICEMSR_ADDR	0xfffffd0e
+#define ICEMSR		WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN	0x0001	/* Emulation Enable */
+#define ICEMSR_BRKIRQ	0x0002	/* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ	0x0004	/* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ	0x0008	/* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68VZ328_H_ */
diff --git a/arch/m68knommu/include/asm/a.out.h b/arch/m68knommu/include/asm/a.out.h
new file mode 100644
index 00000000000..ce18ef99de0
--- /dev/null
+++ b/arch/m68knommu/include/asm/a.out.h
@@ -0,0 +1 @@
+#include <asm-m68k/a.out.h>
diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68knommu/include/asm/anchor.h
new file mode 100644
index 00000000000..871c0d5cfc3
--- /dev/null
+++ b/arch/m68knommu/include/asm/anchor.h
@@ -0,0 +1,112 @@
+/****************************************************************************/
+
+/*
+ *	anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
+ *
+ *	(C) Copyright 2000, Moreton Bay (www.moreton.com.au)
+ */
+
+/****************************************************************************/
+#ifndef	anchor_h
+#define	anchor_h
+/****************************************************************************/
+
+/*
+ *	Define basic addressing info.
+ */
+#if defined(CONFIG_M5407C3)
+#define	COMEM_BASE	0xFFFF0000	/* Base of CO-MEM address space */
+#define	COMEM_IRQ	25		/* IRQ of anchor part */
+#else
+#define	COMEM_BASE	0x80000000	/* Base of CO-MEM address space */
+#define	COMEM_IRQ	25		/* IRQ of anchor part */
+#endif
+
+/****************************************************************************/
+
+/*
+ *	4-byte registers of CO-MEM, so adjust register addresses for
+ *	easy access. Handy macro for word access too.
+ */
+#define	LREG(a)		((a) >> 2)
+#define	WREG(a)		((a) >> 1)
+
+
+/*
+ *	Define base addresses within CO-MEM Lite register address space.
+ */
+#define	COMEM_I2O	0x0000		/* I2O registers */
+#define	COMEM_OPREGS	0x0400		/* Operation registers */
+#define	COMEM_PCIBUS	0x2000		/* Direct access to PCI bus */
+#define	COMEM_SHMEM	0x4000		/* Shared memory region */
+
+#define	COMEM_SHMEMSIZE	0x4000		/* Size of shared memory */
+
+
+/*
+ *	Define CO-MEM Registers.
+ */
+#define	COMEM_I2OHISR	0x0030		/* I2O host interrupt status */
+#define	COMEM_I2OHIMR	0x0034		/* I2O host interrupt mask */
+#define	COMEM_I2OLISR	0x0038		/* I2O local interrupt status */
+#define	COMEM_I2OLIMR	0x003c		/* I2O local interrupt mask */
+#define	COMEM_IBFPFIFO	0x0040		/* I2O inbound free/post FIFO */
+#define	COMEM_OBPFFIFO	0x0044		/* I2O outbound post/free FIFO */
+#define	COMEM_IBPFFIFO	0x0048		/* I2O inbound post/free FIFO */
+#define	COMEM_OBFPFIFO	0x004c		/* I2O outbound free/post FIFO */
+
+#define	COMEM_DAHBASE	0x0460		/* Direct access base address */
+
+#define	COMEM_NVCMD	0x04a0		/* I2C serial command */
+#define	COMEM_NVREAD	0x04a4		/* I2C serial read */
+#define	COMEM_NVSTAT	0x04a8		/* I2C status */
+
+#define	COMEM_DMALBASE	0x04b0		/* DMA local base address */
+#define	COMEM_DMAHBASE	0x04b4		/* DMA host base address */
+#define	COMEM_DMASIZE	0x04b8		/* DMA size */
+#define	COMEM_DMACTL	0x04bc		/* DMA control */
+
+#define	COMEM_HCTL	0x04e0		/* Host control */
+#define	COMEM_HINT	0x04e4		/* Host interrupt control/status */
+#define	COMEM_HLDATA	0x04e8		/* Host to local data mailbox */
+#define	COMEM_LINT	0x04f4		/* Local interrupt contole status */
+#define	COMEM_LHDATA	0x04f8		/* Local to host data mailbox */
+
+#define	COMEM_LBUSCFG	0x04fc		/* Local bus configuration */
+
+
+/*
+ *	Commands and flags for use with Direct Access Register.
+ */
+#define	COMEM_DA_IACK	0x00000000	/* Interrupt acknowledge (read) */
+#define	COMEM_DA_SPCL	0x00000010	/* Special cycle (write) */
+#define	COMEM_DA_MEMRD	0x00000004	/* Memory read cycle */
+#define	COMEM_DA_MEMWR	0x00000004	/* Memory write cycle */
+#define	COMEM_DA_IORD	0x00000002	/* I/O read cycle */
+#define	COMEM_DA_IOWR	0x00000002	/* I/O write cycle */
+#define	COMEM_DA_CFGRD	0x00000006	/* Configuration read cycle */
+#define	COMEM_DA_CFGWR	0x00000006	/* Configuration write cycle */
+
+#define	COMEM_DA_ADDR(a)	((a) & 0xffffe000)
+
+#define	COMEM_DA_OFFSET(a)	((a) & 0x00001fff)
+
+
+/*
+ *	The PCI bus will be limited in what slots will actually be used.
+ *	Define valid device numbers for different boards.
+ */
+#if defined(CONFIG_M5407C3)
+#define	COMEM_MINDEV	14		/* Minimum valid DEVICE */
+#define	COMEM_MAXDEV	14		/* Maximum valid DEVICE */
+#define	COMEM_BRIDGEDEV	15		/* Slot bridge is in */
+#else
+#define	COMEM_MINDEV	0		/* Minimum valid DEVICE */
+#define	COMEM_MAXDEV	3		/* Maximum valid DEVICE */
+#endif
+
+#define	COMEM_MAXPCI	(COMEM_MAXDEV+1)	/* Maximum PCI devices */
+
+
+/****************************************************************************/
+#endif	/* anchor_h */
diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68knommu/include/asm/atomic.h
new file mode 100644
index 00000000000..d5632a305da
--- /dev/null
+++ b/arch/m68knommu/include/asm/atomic.h
@@ -0,0 +1,155 @@
+#ifndef __ARCH_M68KNOMMU_ATOMIC__
+#define __ARCH_M68KNOMMU_ATOMIC__
+
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+typedef struct { int counter; } atomic_t;
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
+#else
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
+#else
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
+{
+	char c;
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "d" (i));
+#else
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "di" (i));
+#endif
+	return c != 0;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t *v)
+{
+	__asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+
+static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static __inline__ void atomic_dec(volatile atomic_t *v)
+{
+	__asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp += i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp -= i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+#include <asm-generic/atomic.h>
+#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68knommu/include/asm/auxvec.h
new file mode 100644
index 00000000000..844d6d52204
--- /dev/null
+++ b/arch/m68knommu/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMm68k_AUXVEC_H
+#define __ASMm68k_AUXVEC_H
+
+#endif
diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68knommu/include/asm/bitops.h
new file mode 100644
index 00000000000..6f3685eab44
--- /dev/null
+++ b/arch/m68knommu/include/asm/bitops.h
@@ -0,0 +1,336 @@
+#ifndef _M68KNOMMU_BITOPS_H
+#define _M68KNOMMU_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>	/* swab32 */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline int ffs(unsigned int val)
+{
+        if (!val)
+                return 0;
+
+        asm volatile(
+                        "bitrev %0\n\t"
+                        "ff1 %0\n\t"
+                        : "=d" (val)
+                        : "0" (val)
+		    );
+        val++;
+        return val;
+}
+
+static inline int __ffs(unsigned int val)
+{
+        asm volatile(
+                        "bitrev %0\n\t"
+                        "ff1 %0\n\t"
+                        : "=d" (val)
+                        : "0" (val)
+		    );
+        return val;
+}
+
+#else
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bset %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __set_bit(nr, addr) set_bit(nr, addr)
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bclr %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bchg %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __change_bit(nr, addr) change_bit(nr, addr)
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bchg %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
+{
+	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
+{
+	int 	* a = (int *) addr;
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_set_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_clear_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
+	     : "=d" (retval)
+	     : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("btst %2,%1; sne %0"
+	     : "=d" (retval)
+	     : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease performance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+
+#define ext2_find_next_bit(addr, size, off) \
+	generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _M68KNOMMU_BITOPS_H */
diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h
new file mode 100644
index 00000000000..c12e526f518
--- /dev/null
+++ b/arch/m68knommu/include/asm/bootinfo.h
@@ -0,0 +1,2 @@
+
+/* Nothing for m68knommu */
diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68knommu/include/asm/bootstd.h
new file mode 100644
index 00000000000..bdc1a4ac4fe
--- /dev/null
+++ b/arch/m68knommu/include/asm/bootstd.h
@@ -0,0 +1,132 @@
+/* bootstd.h:  Bootloader system call interface
+ *
+ * (c) 1999, Rt-Control, Inc.
+ */
+
+#ifndef __BOOTSTD_H__
+#define __BOOTSTD_H__
+
+#define NR_BSC 21            /* last used bootloader system call */
+
+#define __BN_reset        0  /* reset and start the bootloader */
+#define __BN_test         1  /* tests the system call interface */
+#define __BN_exec         2  /* executes a bootloader image */
+#define __BN_exit         3  /* terminates a bootloader image */
+#define __BN_program      4  /* program FLASH from a chain */
+#define __BN_erase        5  /* erase sector(s) of FLASH */
+#define __BN_open         6
+#define __BN_write        7
+#define __BN_read         8
+#define __BN_close        9
+#define __BN_mmap         10 /* map a file descriptor into memory */
+#define __BN_munmap       11 /* remove a file to memory mapping */
+#define __BN_gethwaddr    12 /* get the hardware address of my interfaces */
+#define __BN_getserialnum 13 /* get the serial number of this board */
+#define __BN_getbenv      14 /* get a bootloader envvar */
+#define __BN_setbenv      15 /* get a bootloader envvar */
+#define __BN_setpmask     16 /* set the protection mask */
+#define __BN_readenv      17 /* read environment variables */
+#define __BN_flash_chattr_range		18
+#define __BN_flash_erase_range		19
+#define __BN_flash_write_range		20
+
+/* Calling conventions compatible to (uC)linux/68k
+ * We use simmilar macros to call into the bootloader as for uClinux
+ */
+
+#define __bsc_return(type, res) \
+do { \
+   if ((unsigned long)(res) >= (unsigned long)(-64)) { \
+      /* let errno be a function, preserve res in %d0 */ \
+      int __err = -(res); \
+      errno = __err; \
+      res = -1; \
+   } \
+   return (type)(res); \
+} while (0)
+
+#define _bsc0(type,name) \
+type name(void) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc1(type,name,atype,a) \
+type name(atype a) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc2(type,name,atype,a,btype,b) \
+type name(atype a, btype b) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a, btype b, ctype c) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name(atype a, btype b, ctype c, dtype d) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name(atype a, btype b, ctype c, dtype d, etype e) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   register long __e __asm__ ("%d5") = (long)e; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d), "d" (__e) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#endif /* __BOOTSTD_H__ */
diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68knommu/include/asm/bug.h
new file mode 100644
index 00000000000..70e7dc0af21
--- /dev/null
+++ b/arch/m68knommu/include/asm/bug.h
@@ -0,0 +1,4 @@
+#ifndef _M68KNOMMU_BUG_H
+#define _M68KNOMMU_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68knommu/include/asm/bugs.h
new file mode 100644
index 00000000000..5f382dac3a6
--- /dev/null
+++ b/arch/m68knommu/include/asm/bugs.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-m68k/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
new file mode 100644
index 00000000000..20bb4426b61
--- /dev/null
+++ b/arch/m68knommu/include/asm/byteorder.h
@@ -0,0 +1,27 @@
+#ifndef _M68KNOMMU_BYTEORDER_H
+#define _M68KNOMMU_BYTEORDER_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 val)
+{
+	asm(
+			"byterev %0"
+			: "=d" (val)
+			: "0" (val)
+	   );
+	return val;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68knommu/include/asm/cache.h
new file mode 100644
index 00000000000..24e9eace5f8
--- /dev/null
+++ b/arch/m68knommu/include/asm/cache.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_M68KNOMMU_CACHE_H
+#define __ARCH_M68KNOMMU_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_BYTES  16	/* this need to be at least 1 */
+
+/* m68k-elf-gcc  2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h
new file mode 100644
index 00000000000..bcf5a6a9dd5
--- /dev/null
+++ b/arch/m68knommu/include/asm/cachectl.h
@@ -0,0 +1 @@
+#include <asm-m68k/cachectl.h>
diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h
new file mode 100644
index 00000000000..87e5dc0413b
--- /dev/null
+++ b/arch/m68knommu/include/asm/cacheflush.h
@@ -0,0 +1,84 @@
+#ifndef _M68KNOMMU_CACHEFLUSH_H
+#define _M68KNOMMU_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+
+#define flush_cache_all()			__flush_cache_all()
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	__flush_cache_all()
+#define flush_cache_page(vma, vmaddr)		do { } while (0)
+#define flush_dcache_range(start,len)		__flush_cache_all()
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start,len)		__flush_cache_all()
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+static inline void __flush_cache_all(void)
+{
+#ifdef CONFIG_M5407
+	/*
+	 *	Use cpushl to push and invalidate all cache lines.
+	 *	Gas doesn't seem to know how to generate the ColdFire
+	 *	cpushl instruction... Oh well, bit stuff it for now.
+	 */
+	__asm__ __volatile__ (
+		"nop\n\t"
+		"clrl	%%d0\n\t"
+		"1:\n\t"
+		"movel	%%d0,%%a0\n\t"
+		"2:\n\t"
+		".word	0xf468\n\t"
+		"addl	#0x10,%%a0\n\t"
+		"cmpl	#0x00000800,%%a0\n\t"
+		"blt	2b\n\t"
+		"addql	#1,%%d0\n\t"
+		"cmpil	#4,%%d0\n\t"
+		"bne	1b\n\t"
+		"movel	#0xb6088500,%%d0\n\t"
+		"movec	%%d0,%%CACR\n\t"
+		: : : "d0", "a0" );
+#endif /* CONFIG_M5407 */
+#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+	__asm__ __volatile__ (
+		"movel	#0x81000200, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M527x || CONFIG_M528x */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+	__asm__ __volatile__ (
+		"movel	#0x81000100, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+#ifdef CONFIG_M5249
+	__asm__ __volatile__ (
+		"movel	#0xa1000200, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M5249 */
+#ifdef CONFIG_M532x
+	__asm__ __volatile__ (
+		"movel	#0x81000200, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M532x */
+}
+
+#endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68knommu/include/asm/checksum.h
new file mode 100644
index 00000000000..81883482ffb
--- /dev/null
+++ b/arch/m68knommu/include/asm/checksum.h
@@ -0,0 +1,132 @@
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+	int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+	void *dst, int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp = (__force u32)sum;
+#ifdef CONFIG_COLDFIRE
+	tmp = (tmp & 0xffff) + (tmp >> 16);
+	tmp = (tmp & 0xffff) + (tmp >> 16);
+	return (__force __sum16)~tmp;
+#else
+	__asm__("swap %1\n\t"
+		"addw %1, %0\n\t"
+		"clrw %1\n\t"
+		"addxw %1, %0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "0" (sum), "1" (sum));
+	return (__force __sum16)~sum;
+#endif
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	__asm__ ("addl  %1,%0\n\t"
+		 "addxl %4,%0\n\t"
+		 "addxl %5,%0\n\t"
+		 "clrl %1\n\t"
+		 "addxl %1,%0"
+		 : "=&d" (sum), "=&d" (saddr)
+		 : "0" (daddr), "1" (saddr), "d" (len + proto),
+		   "d"(sum));
+	return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, unsigned short proto, __wsum sum)
+{
+	register unsigned long tmp;
+	__asm__("addl %2@,%0\n\t"
+		"movel %2@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@,%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"addxl %4,%0\n\t"
+		"clrl %1\n\t"
+		"addxl %1,%0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "a" (saddr), "a" (daddr), "d" (len + proto),
+		  "0" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68knommu/include/asm/coldfire.h
new file mode 100644
index 00000000000..83a9fa4e618
--- /dev/null
+++ b/arch/m68knommu/include/asm/coldfire.h
@@ -0,0 +1,51 @@
+/****************************************************************************/
+
+/*
+ *	coldfire.h -- Motorola ColdFire CPU sepecific defines
+ *
+ *	(C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	coldfire_h
+#define	coldfire_h
+/****************************************************************************/
+
+
+/*
+ *	Define master clock frequency. This is essentially done at config
+ *	time now. No point enumerating dozens of possible clock options
+ *	here. Also the peripheral clock (bus clock) divide ratio is set
+ *	at config time too.
+ */
+#ifdef CONFIG_CLOCK_SET
+#define	MCF_CLK		CONFIG_CLOCK_FREQ
+#define	MCF_BUSCLK	(CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
+#else
+#error "Don't know what your ColdFire CPU clock frequency is??"
+#endif
+
+/*
+ *	Define the processor support peripherals base address.
+ *	This is generally setup by the boards start up code.
+ */
+#define	MCF_MBAR	0x10000000
+#define	MCF_MBAR2	0x80000000
+#if defined(CONFIG_M520x)
+#define	MCF_IPSBAR	0xFC000000
+#else
+#define	MCF_IPSBAR	0x40000000
+#endif
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x)
+#undef MCF_MBAR
+#define	MCF_MBAR	MCF_IPSBAR
+#elif defined(CONFIG_M532x)
+#undef MCF_MBAR
+#define MCF_MBAR	0x00000000
+#endif
+
+/****************************************************************************/
+#endif	/* coldfire_h */
diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68knommu/include/asm/commproc.h
new file mode 100644
index 00000000000..edf5eb6c08d
--- /dev/null
+++ b/arch/m68knommu/include/asm/commproc.h
@@ -0,0 +1,703 @@
+
+/*
+ * 68360 Communication Processor Module.
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
+ * This file is not a complete map of all of the 360 QUICC's capabilities
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_360__
+#define __CPM_360__
+
+
+/* CPM Command register masks: */
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* CPM Command set (opcodes): */
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRSTOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_GCI_TIMEOUT	((ushort)0x0009)
+#define CPM_CR_GCI_ABORT	((ushort)0x000a)
+#define CPM_CR_RESET_BCS	((ushort)0x000a)
+
+/* CPM Channel numbers. */
+#define CPM_CR_CH_SCC1	((ushort)0x0000)
+#define CPM_CR_CH_SCC2	((ushort)0x0004)
+#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / Timers */
+#define CPM_CR_CH_TMR	((ushort)0x0005)
+#define CPM_CR_CH_SCC3	((ushort)0x0008)
+#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / IDMA1 */
+#define CPM_CR_CH_IDMA1	((ushort)0x0009)
+#define CPM_CR_CH_SCC4	((ushort)0x000c)
+#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / IDMA2 */
+#define CPM_CR_CH_IDMA2	((ushort)0x000d)
+
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+#if 1 /* mleslie: I dinna think we have any such restrictions on
+       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
+
+/* The dual ported RAM is multi-functional.  Some areas can be (and are
+ * being) used for microcode.  There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
+#define CPM_DATAONLY_BASE	((uint)0x0000)
+#define CPM_DATAONLY_SIZE	((uint)0x0800)
+#define CPM_DP_NOSPACE		((uint)0x7fffffff)
+
+#endif
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram. */
+/* extern	cpm360_t	*cpmp; */		/* Pointer to comm processor */
+extern QUICC *pquicc;
+uint         m360_cpm_dpalloc(uint size);
+/* void         *m360_cpm_hostalloc(uint size); */
+void	      m360_cpm_setbrg(uint brg, uint rate);
+
+#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+#endif
+
+
+/* rx bd status/control bits */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
+
+#define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
+#define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
+
+#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
+
+#define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
+#define BD_SC_DE	((ushort)0x0080)	/* DPLL Error (HDLC) */
+
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_LG	((ushort)0x0020)	/* Frame length violation (HDLC) */
+
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_NO	((ushort)0x0010)	/* Nonoctet aligned frame (HDLC) */
+
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_AB	((ushort)0x0008)	/* Received abort Sequence (HDLC) */
+
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
+
+/* tx bd status/control bits (as differ from rx bd) */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
+
+
+
+
+/* Parameter RAM offsets. */
+
+
+
+/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
+ * In 2.0, we use a more structured C struct map of DPRAM, and so 
+ * instead, we need only a parameter ram `slot'  */
+
+#define PRSLOT_SCC1	0
+#define PRSLOT_SCC2	1
+#define PRSLOT_SCC3	2
+#define PRSLOT_SMC1	2
+#define PRSLOT_SCC4	3
+#define PRSLOT_SMC2	3
+
+
+/* #define PROFF_SCC1	((uint)0x0000) */
+/* #define PROFF_SCC2	((uint)0x0100) */
+/* #define PROFF_SCC3	((uint)0x0200) */
+/* #define PROFF_SMC1	((uint)0x0280) */
+/* #define PROFF_SCC4	((uint)0x0300) */
+/* #define PROFF_SMC2	((uint)0x0380) */
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+
+/* Function code bits.
+ */
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+
+
+#if defined (CONFIG_UCQUICC)
+/* uCquicc has the following signals connected to Ethernet:
+ *  68360    - lxt905
+ * PA0/RXD1  - rxd
+ * PA1/TXD1  - txd
+ * PA8/CLK1  - tclk
+ * PA9/CLK2  - rclk
+ * PC0/!RTS1 - t_en
+ * PC1/!CTS1 - col
+ * PC5/!CD1  - cd
+ */
+#define PA_ENET_RXD	PA_RXD1
+#define PA_ENET_TXD	PA_TXD1
+#define PA_ENET_TCLK	PA_CLK1
+#define PA_ENET_RCLK	PA_CLK2
+#define PC_ENET_TENA	PC_RTS1
+#define PC_ENET_CLSN	PC_CTS1
+#define PC_ENET_RENA	PC_CD1
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000002c)
+
+#endif /* config_ucquicc */
+
+
+#ifdef MBX
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
+ * to the MBX860 board.  Any two of the four available clocks could be
+ * used, and the MPC860 cookbook manual has an example using different
+ * clock pins.
+ */
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PC_ENET_TENA	((ushort)0x0001)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+#endif
+
+#ifdef CONFIG_RPXLITE
+/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
+ * this may be unique to the RPX-Lite configuration.
+ * Note TENA is on Port B.
+ */
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00003d00)
+#endif
+
+#ifdef CONFIG_BSEIP
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.
+ * This is unique to the BSE ip-Engine board.
+ */
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0100)
+#define PA_ENET_RCLK	((ushort)0x0200)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+/* BSE uses port B and C bits for PHY control also.
+*/
+#define PB_BSE_POWERUP	((uint)0x00000004)
+#define PB_BSE_FDXDIS	((uint)0x00008000)
+#define PC_BSE_LOOPBACK	((ushort)0x0800)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002c00)
+#endif
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PMSR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PMSR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PMSR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PMSR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PMSR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PMSR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PMSR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PMSR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PMSR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PMSR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PMSR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PMSR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PMSR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PMSR_FLC		((ushort)0x8000)
+#define SCU_PMSR_SL		((ushort)0x4000)
+#define SCU_PMSR_CL		((ushort)0x3000)
+#define SCU_PMSR_UM		((ushort)0x0c00)
+#define SCU_PMSR_FRZ		((ushort)0x0200)
+#define SCU_PMSR_RZS		((ushort)0x0100)
+#define SCU_PMSR_SYN		((ushort)0x0080)
+#define SCU_PMSR_DRT		((ushort)0x0040)
+#define SCU_PMSR_PEN		((ushort)0x0010)
+#define SCU_PMSR_RPM		((ushort)0x000c)
+#define SCU_PMSR_REVP		((ushort)0x0008)
+#define SCU_PMSR_TPM		((ushort)0x0003)
+#define SCU_PMSR_TEVP		((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST		((ushort)0x0800)
+
+
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+/* #define CPMVEC_NR		32 */
+/* #define	CPMVEC_PIO_PC15		((ushort)0x1f) */
+/* #define	CPMVEC_SCC1		((ushort)0x1e) */
+/* #define	CPMVEC_SCC2		((ushort)0x1d) */
+/* #define	CPMVEC_SCC3		((ushort)0x1c) */
+/* #define	CPMVEC_SCC4		((ushort)0x1b) */
+/* #define	CPMVEC_PIO_PC14		((ushort)0x1a) */
+/* #define	CPMVEC_TIMER1		((ushort)0x19) */
+/* #define	CPMVEC_PIO_PC13		((ushort)0x18) */
+/* #define	CPMVEC_PIO_PC12		((ushort)0x17) */
+/* #define	CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
+/* #define CPMVEC_IDMA1		((ushort)0x15) */
+/* #define CPMVEC_IDMA2		((ushort)0x14) */
+/* #define CPMVEC_TIMER2		((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
+/* #define CPMVEC_I2C		((ushort)0x10) */
+/* #define	CPMVEC_PIO_PC11		((ushort)0x0f) */
+/* #define	CPMVEC_PIO_PC10		((ushort)0x0e) */
+/* #define CPMVEC_TIMER3		((ushort)0x0c) */
+/* #define	CPMVEC_PIO_PC9		((ushort)0x0b) */
+/* #define	CPMVEC_PIO_PC8		((ushort)0x0a) */
+/* #define	CPMVEC_PIO_PC7		((ushort)0x09) */
+/* #define CPMVEC_TIMER4		((ushort)0x07) */
+/* #define	CPMVEC_PIO_PC6		((ushort)0x06) */
+/* #define	CPMVEC_SPI		((ushort)0x05) */
+/* #define	CPMVEC_SMC1		((ushort)0x04) */
+/* #define	CPMVEC_SMC2		((ushort)0x03) */
+/* #define	CPMVEC_PIO_PC5		((ushort)0x02) */
+/* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
+/* #define	CPMVEC_ERROR		((ushort)0x00) */
+
+extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+#endif /* __CPM_360__ */
diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h
new file mode 100644
index 00000000000..a0c4a660878
--- /dev/null
+++ b/arch/m68knommu/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __M68KNOMMU_CPUTIME_H
+#define __M68KNOMMU_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M68KNOMMU_CPUTIME_H */
diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68knommu/include/asm/current.h
new file mode 100644
index 00000000000..53ee0f9f7ce
--- /dev/null
+++ b/arch/m68knommu/include/asm/current.h
@@ -0,0 +1,24 @@
+#ifndef _M68KNOMMU_CURRENT_H
+#define _M68KNOMMU_CURRENT_H
+/*
+ *	current.h
+ *	(C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ *	rather than dedicate a register (as the m68k source does), we
+ *	just keep a global,  we should probably just change it all to be
+ *	current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+	return(current_thread_info()->task);
+}
+
+#define	current	get_current()
+
+#endif /* _M68KNOMMU_CURRENT_H */
diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68knommu/include/asm/dbg.h
new file mode 100644
index 00000000000..27af3270f67
--- /dev/null
+++ b/arch/m68knommu/include/asm/dbg.h
@@ -0,0 +1,6 @@
+#define DEBUG 1
+#ifdef CONFIG_COLDFIRE
+#define	BREAK asm volatile ("halt")
+#else
+#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
+#endif
diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68knommu/include/asm/delay.h
new file mode 100644
index 00000000000..55cbd6294ab
--- /dev/null
+++ b/arch/m68knommu/include/asm/delay.h
@@ -0,0 +1,76 @@
+#ifndef _M68KNOMMU_DELAY_H
+#define _M68KNOMMU_DELAY_H
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/param.h>
+
+static inline void __delay(unsigned long loops)
+{
+#if defined(CONFIG_COLDFIRE)
+	/* The coldfire runs this loop at significantly different speeds
+	 * depending upon long word alignment or not.  We'll pad it to
+	 * long word alignment which is the faster version.
+	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
+	 * than using a NOP (0x4e71) instruction because it executes in one
+	 * cycle not three and doesn't allow for an arbitary delay waiting
+	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
+	 * stall waiting for the register to become valid if such is added
+	 * to the coldfire at some stage.
+	 */
+	__asm__ __volatile__ (	".balignw 4, 0x4a8e\n\t"
+				"1: subql #1, %0\n\t"
+				"jcc 1b"
+		: "=d" (loops) : "0" (loops));
+#else
+	__asm__ __volatile__ (	"1: subql #1, %0\n\t"
+				"jcc 1b"
+		: "=d" (loops) : "0" (loops));
+#endif
+}
+
+/*
+ *	Ideally we use a 32*32->64 multiply to calculate the number of
+ *	loop iterations, but the older standard 68k and ColdFire do not
+ *	have this instruction. So for them we have a clsoe approximation
+ *	loop using 32*32->32 multiplies only. This calculation based on
+ *	the ARM version of delay.
+ *
+ *	We want to implement:
+ *
+ *	loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
+ */
+
+#define	HZSCALE		(268435456 / (1000000/HZ))
+
+extern unsigned long loops_per_jiffy;
+
+static inline void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
+    defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
+    defined(CONFIG_COLDFIRE)
+	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+#else
+	unsigned long tmp;
+
+	usecs *= 4295;		/* 2**32 / 1000000 */
+	__asm__ ("mulul %2,%0:%1"
+		: "=d" (usecs), "=d" (tmp)
+		: "d" (usecs), "1" (loops_per_jiffy*HZ));
+	__delay(usecs);
+#endif
+}
+
+/*
+ *	Moved the udelay() function into library code, no longer inlined.
+ *	I had to change the algorithm because we are overflowing now on
+ *	the faster ColdFire parts. The code is a little bigger, so it makes
+ *	sense to library it.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* defined(_M68KNOMMU_DELAY_H) */
diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68knommu/include/asm/device.h
new file mode 100644
index 00000000000..d8f9872b0e2
--- /dev/null
+++ b/arch/m68knommu/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68knommu/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/m68knommu/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..6aeab18e58b
--- /dev/null
+++ b/arch/m68knommu/include/asm/dma-mapping.h
@@ -0,0 +1,10 @@
+#ifndef _M68KNOMMU_DMA_MAPPING_H
+#define _M68KNOMMU_DMA_MAPPING_H
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif  /* _M68KNOMMU_DMA_MAPPING_H */
diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68knommu/include/asm/dma.h
new file mode 100644
index 00000000000..939a0205621
--- /dev/null
+++ b/arch/m68knommu/include/asm/dma.h
@@ -0,0 +1,494 @@
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+ 
+//#define	DMA_DEBUG	1
+
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ *               Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#elif defined(CONFIG_M532x)
+#define MAX_M68K_DMA_CHANNELS 0
+#else
+#define MAX_M68K_DMA_CHANNELS 2
+#endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	            0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD          2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG          4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         5
+/* I/O to memory, 8 bits, single-address-mode */     
+#define DMA_MODE_READ_SINGLE        8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE       9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE  10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE  12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01  
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06 
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF  0x01  
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10  
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60  
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF  0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG  0x00
+#define DMA_MODE_SIZE_BYTE  0x01
+#define DMA_MODE_SIZE_WORD  0x02
+#define DMA_MODE_SIZE_LINE  0x03
+
+/* 
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned char  *dmapb;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned char  *dmabp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+  dmabp = (unsigned char *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
+
+  // Set command register
+  dmawp[MCFDMA_DCR] =
+    MCFDMA_DCR_INT |         // Enable completion irq
+    MCFDMA_DCR_CS |          // Force one xfer per request
+    MCFDMA_DCR_AA |          // Enable auto alignment
+    // single-address-mode
+    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+    // sets s_rw (-> r/w) high if Memory to I/0
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+    // Memory to I/O or I/O to Memory
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+    // 32 bit, 16 bit or 8 bit transfers
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+                                   MCFDMA_DCR_SSIZE_BYTE)) |
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+                                   MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_SAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  unsigned short count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  count = dmawp[MCFDMA_BCR];
+  return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping.  For instance, with the exception of the 16-bit 
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA.  All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose.  This puts a crimp in distinguishing between the 'device 
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value.  Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit.  Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned int  *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned int   *dmalp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
+
+  // Set command register
+  dmalp[MCFDMA_DMR] =
+    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
+    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
+    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
+    // source static-address-mode
+    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+    // dest static-address-mode
+    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+    
+  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
+  
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_DSAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DDAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned int *dmalp;
+  
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned int *dmalp;
+  unsigned int count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  count = dmalp[MCFDMA_DBCR];
+  return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+ 
+#define MAX_DMA_CHANNELS 8
+
+/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
+   occurrence should be flagged as an error.  */
+/* under 2.4 it is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+ 
+#endif /* _M68K_DMA_H */
diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68knommu/include/asm/elf.h
new file mode 100644
index 00000000000..27f0ec70fba
--- /dev/null
+++ b/arch/m68knommu/include/asm/elf.h
@@ -0,0 +1,110 @@
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE  0
+#define R_68K_32    1
+#define R_68K_16    2
+#define R_68K_8     3
+#define R_68K_PC32  4
+#define R_68K_PC16  5
+#define R_68K_PC8   6
+#define R_68K_GOT32 7
+#define R_68K_GOT16 8
+#define R_68K_GOT8  9
+#define R_68K_GOT32O    10
+#define R_68K_GOT16O    11
+#define R_68K_GOT8O 12
+#define R_68K_PLT32 13
+#define R_68K_PLT16 14
+#define R_68K_PLT8  15
+#define R_68K_PLT32O    16
+#define R_68K_PLT16O    17
+#define R_68K_PLT8O 18
+#define R_68K_COPY  19
+#define R_68K_GLOB_DAT  20
+#define R_68K_JMP_SLOT  21
+#define R_68K_RELATIVE  22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+   passed in %a1.  Although my copy of the ABI has no such statement, it
+   is actually used on ASV.  */
+#define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
+	/* Bleech. */							\
+	pr_reg[0] = regs->d1;						\
+	pr_reg[1] = regs->d2;						\
+	pr_reg[2] = regs->d3;						\
+	pr_reg[3] = regs->d4;						\
+	pr_reg[4] = regs->d5;						\
+	pr_reg[7] = regs->a0;						\
+	pr_reg[8] = regs->a1;						\
+	pr_reg[14] = regs->d0;						\
+	pr_reg[15] = rdusp();						\
+	pr_reg[16] = 0 /* regs->orig_d0 */;				\
+	pr_reg[17] = regs->sr;						\
+	pr_reg[18] = regs->pc;						\
+	/* pr_reg[19] = (regs->format << 12) | regs->vector; */		\
+	{								\
+	  struct switch_stack *sw = ((struct switch_stack *)regs) - 1;	\
+	  pr_reg[5] = sw->d6;						\
+	  pr_reg[6] = sw->d7;						\
+	  pr_reg[10] = sw->a3;						\
+	  pr_reg[11] = sw->a4;						\
+	  pr_reg[12] = sw->a5;						\
+	  pr_reg[13] = sw->a6;						\
+	}
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif
diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68knommu/include/asm/elia.h
new file mode 100644
index 00000000000..e037d4e2de3
--- /dev/null
+++ b/arch/m68knommu/include/asm/elia.h
@@ -0,0 +1,41 @@
+/****************************************************************************/
+
+/*
+ *	elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
+ *
+ *	(C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
+ *	(C) Copyright 1999-2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	elia_h
+#define	elia_h
+/****************************************************************************/
+
+#include <asm/coldfire.h>
+
+#ifdef CONFIG_eLIA
+
+/*
+ *	The serial port DTR and DCD lines are also on the Parallel I/O
+ *	as well, so define those too.
+ */
+
+#define	eLIA_DCD1		0x0001
+#define	eLIA_DCD0		0x0002
+#define	eLIA_DTR1		0x0004
+#define	eLIA_DTR0		0x0008
+
+#define	eLIA_PCIRESET		0x0020
+
+/*
+ *	Kernel macros to set and unset the LEDs.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned short	ppdata;
+#endif /* __ASSEMBLY__ */
+
+#endif	/* CONFIG_eLIA */
+
+/****************************************************************************/
+#endif	/* elia_h */
diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/m68knommu/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68knommu/include/asm/entry.h
new file mode 100644
index 00000000000..c2553d26273
--- /dev/null
+++ b/arch/m68knommu/include/asm/entry.h
@@ -0,0 +1,182 @@
+#ifndef __M68KNOMMU_ENTRY_H
+#define __M68KNOMMU_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ *	 0(sp) - d1
+ *	 4(sp) - d2
+ *	 8(sp) - d3
+ *	 C(sp) - d4
+ *	10(sp) - d5
+ *	14(sp) - a0
+ *	18(sp) - a1
+ *	1C(sp) - a2
+ *	20(sp) - d0
+ *	24(sp) - orig_d0
+ *	28(sp) - stack adjustment
+ *	2C(sp) - [ sr              ] [ format & vector ]
+ *	2E(sp) - [ pc-hiword       ] [ sr              ]
+ *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
+ *	32(sp) - [ format & vector ] [ pc-loword       ]
+ *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
+ *			M68K		  COLDFIRE
+ */
+
+#define ALLOWINT 0xf8ff
+
+#ifdef __ASSEMBLY__
+
+/* process bits for task_struct.flags */
+PF_TRACESYS_OFF = 3
+PF_TRACESYS_BIT = 5
+PF_PTRACED_OFF = 3
+PF_PTRACED_BIT = 4
+PF_DTRACE_OFF = 1
+PF_DTRACE_BIT = 5
+
+LENOSYS = 38
+
+#define SWITCH_STACK_SIZE (6*4+4)	/* Includes return address */
+
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs are a2-a6 and d6-d7 preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * This is made a little more tricky on the ColdFire. There is no
+ * separate kernel and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things could happen.
+ */
+.macro SAVE_ALL
+	move	#0x2700,%sr		/* disable intrs */
+	btst	#5,%sp@(2)		/* from user? */
+	bnes	6f			/* no, skip */
+	movel	%sp,sw_usp		/* save user sp */
+	addql	#8,sw_usp		/* remove exception */
+	movel	sw_ksp,%sp		/* kernel sp */
+	subql	#8,%sp			/* room for exception */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	movel	sw_usp,%a0		/* get usp */
+	movel	%a0@-,%sp@(PT_PC)	/* copy exception program counter */
+	movel	%a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+	bra	7f
+	6:
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	7:
+.endm
+
+.macro RESTORE_ALL
+	btst	#5,%sp@(PT_SR)		/* going user? */
+	bnes	8f			/* no, skip */
+	move	#0x2700,%sr		/* disable intrs */
+	movel	sw_usp,%a0		/* get usp */
+	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
+	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	addql	#8,%sp			/* remove exception */
+	movel	%sp,sw_ksp		/* save ksp */
+	subql	#8,sw_usp		/* set exception */
+	movel	sw_usp,%sp		/* restore usp */
+	rte
+	8:
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+/*
+ * Quick exception save, use current stack only.
+ */
+.macro SAVE_LOCAL
+	move	#0x2700,%sr		/* disable intrs */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_LOCAL
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+	lea	%sp@(-24),%sp		/* 6 regs */
+	moveml	%a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@,%a3-%a6/%d6-%d7
+	lea	%sp@(24),%sp		/* 6 regs */
+.endm
+
+/*
+ * Software copy of the user and kernel stack pointers... Ugh...
+ * Need these to get around ColdFire not having separate kernel
+ * and user stack pointers.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * Standard 68k interrupt entry and exit macros.
+ */
+.macro SAVE_ALL
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	moveml	%d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+	moveml	%sp@+,%a0-%a2/%d1-%d5
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+	moveml	%a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+#endif /* __ASSEMBLY__ */
+#endif /* __M68KNOMMU_ENTRY_H */
diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h
new file mode 100644
index 00000000000..7e8c22b9a5e
--- /dev/null
+++ b/arch/m68knommu/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-m68k/errno.h>
diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68knommu/include/asm/fb.h
new file mode 100644
index 00000000000..c7df3803099
--- /dev/null
+++ b/arch/m68knommu/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h
new file mode 100644
index 00000000000..f6a552cda4c
--- /dev/null
+++ b/arch/m68knommu/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-m68k/fcntl.h>
diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68knommu/include/asm/flat.h
new file mode 100644
index 00000000000..814b5174a8e
--- /dev/null
+++ b/arch/m68knommu/include/asm/flat.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-m68knommu/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __M68KNOMMU_FLAT_H__
+#define __M68KNOMMU_FLAT_H__
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		0
+
+#endif /* __M68KNOMMU_FLAT_H__ */
diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68knommu/include/asm/fpu.h
new file mode 100644
index 00000000000..b16b2e4fca2
--- /dev/null
+++ b/arch/m68knommu/include/asm/fpu.h
@@ -0,0 +1,21 @@
+#ifndef __M68KNOMMU_FPU_H
+#define __M68KNOMMU_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216/sizeof(unsigned char))
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96/sizeof(unsigned char))
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28/sizeof(unsigned char))
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12/sizeof(unsigned char))
+#else
+/* Assume no FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+#endif
+
+#endif /* __M68K_FPU_H */
diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68knommu/include/asm/futex.h
new file mode 100644
index 00000000000..6a332a9f099
--- /dev/null
+++ b/arch/m68knommu/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68knommu/include/asm/hardirq.h
new file mode 100644
index 00000000000..bfad28149a4
--- /dev/null
+++ b/arch/m68knommu/include/asm/hardirq.h
@@ -0,0 +1,27 @@
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* __M68K_HARDIRQ_H */
diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h
new file mode 100644
index 00000000000..f3ec9e5ae04
--- /dev/null
+++ b/arch/m68knommu/include/asm/hw_irq.h
@@ -0,0 +1,4 @@
+#ifndef __M68KNOMMU_HW_IRQ_H__
+#define __M68KNOMMU_HW_IRQ_H__
+
+#endif /* __M68KNOMMU_HW_IRQ_H__ */
diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h
new file mode 100644
index 00000000000..700626a1b1b
--- /dev/null
+++ b/arch/m68knommu/include/asm/hwtest.h
@@ -0,0 +1 @@
+#include <asm-m68k/hwtest.h>
diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68knommu/include/asm/io.h
new file mode 100644
index 00000000000..6adef1ee208
--- /dev/null
+++ b/arch/m68knommu/include/asm/io.h
@@ -0,0 +1,194 @@
+#ifndef _M68KNOMMU_IO_H
+#define _M68KNOMMU_IO_H
+
+#ifdef __KERNEL__
+
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+    return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#define readb(addr) \
+    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char *ap = (volatile unsigned char *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+	while (len--)
+		*ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned int *ap = (volatile unsigned int *) addr;
+	unsigned int *bp = (unsigned int *) buf;
+	while (len--)
+		*ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char *ap = (volatile unsigned char *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+	while (len--)
+		*bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned int *ap = (volatile unsigned int *) addr;
+	unsigned int *bp = (unsigned int *) buf;
+	while (len--)
+		*bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ *	make the short names macros so specific devices
+ *	can override them as required
+ */
+
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+#define inb(addr)    readb(addr)
+#define inw(addr)    readw(addr)
+#define inl(addr)    readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* Pages to physical address... */
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_IO_H */
diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68knommu/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/m68knommu/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h
new file mode 100644
index 00000000000..0b1eb4d8505
--- /dev/null
+++ b/arch/m68knommu/include/asm/ioctls.h
@@ -0,0 +1 @@
+#include <asm-m68k/ioctls.h>
diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..e4a7be6dd70
--- /dev/null
+++ b/arch/m68knommu/include/asm/ipcbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/ipcbuf.h>
diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68knommu/include/asm/irq.h
new file mode 100644
index 00000000000..9373c31ac87
--- /dev/null
+++ b/arch/m68knommu/include/asm/irq.h
@@ -0,0 +1,26 @@
+#ifndef _M68KNOMMU_IRQ_H_
+#define _M68KNOMMU_IRQ_H_
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * On the ColdFire we keep track of all vectors. That way drivers
+ * can register whatever vector number they wish, and we can deal
+ * with it.
+ */
+#define	SYS_IRQS	256
+#define	NR_IRQS		SYS_IRQS
+
+#else
+
+/*
+ * # of m68k interrupts
+ */
+#define SYS_IRQS	8
+#define NR_IRQS		(24 + SYS_IRQS)
+
+#endif /* CONFIG_COLDFIRE */
+
+
+#define irq_canonicalize(irq)	(irq)
+
+#endif /* _M68KNOMMU_IRQ_H_ */
diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/m68knommu/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68knommu/include/asm/kdebug.h
new file mode 100644
index 00000000000..6ece1b03766
--- /dev/null
+++ b/arch/m68knommu/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h
new file mode 100644
index 00000000000..bfb6707575d
--- /dev/null
+++ b/arch/m68knommu/include/asm/kmap_types.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h
new file mode 100644
index 00000000000..c288a19ff48
--- /dev/null
+++ b/arch/m68knommu/include/asm/linkage.h
@@ -0,0 +1 @@
+#include <asm-m68k/linkage.h>
diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h
new file mode 100644
index 00000000000..84a39c1b86f
--- /dev/null
+++ b/arch/m68knommu/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef __M68KNOMMU_LOCAL_H
+#define __M68KNOMMU_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __M68KNOMMU_LOCAL_H */
diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h
new file mode 100644
index 00000000000..7e3594dea88
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5206sim.h
@@ -0,0 +1,131 @@
+/****************************************************************************/
+
+/*
+ *	m5206sim.h -- ColdFire 5206 System Integration Module support.
+ *
+ *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	m5206sim_h
+#define	m5206sim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 5206 SIM register set addresses.
+ */
+#define	MCFSIM_SIMR		0x03		/* SIM Config reg (r/w) */
+#define	MCFSIM_ICR1		0x14		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x15		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x16		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x17		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x18		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x19		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x1a		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x1b		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x1c		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x1d		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x1e		/* Intr Ctrl reg 11 (r/w) */
+#define	MCFSIM_ICR12		0x1f		/* Intr Ctrl reg 12 (r/w) */
+#define	MCFSIM_ICR13		0x20		/* Intr Ctrl reg 13 (r/w) */
+#ifdef CONFIG_M5206e
+#define	MCFSIM_ICR14		0x21		/* Intr Ctrl reg 14 (r/w) */
+#define	MCFSIM_ICR15		0x22		/* Intr Ctrl reg 15 (r/w) */
+#endif
+
+#define MCFSIM_IMR		0x36		/* Interrupt Mask reg (r/w) */
+#define MCFSIM_IPR		0x3a		/* Interrupt Pend reg (r/w) */
+
+#define	MCFSIM_RSR		0x40		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x41		/* System Protection reg (r/w)*/
+
+#define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
+
+#define	MCFSIM_DCRR		0x46		/* DRAM Refresh reg (r/w) */
+#define	MCFSIM_DCTR		0x4a		/* DRAM Timing reg (r/w) */
+#define	MCFSIM_DAR0		0x4c		/* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DMR0		0x50		/* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCR0		0x57		/* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DAR1		0x58		/* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCR1		0x63		/* DRAM 1 Control reg (r/w) */
+
+#define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
+#define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
+#define	MCFSIM_CSCR0		0x6e		/* CS 0 Control reg (r/w) */
+#define	MCFSIM_CSAR1		0x70		/* CS 1 Address reg (r/w) */
+#define	MCFSIM_CSMR1		0x74		/* CS 1 Mask reg (r/w) */
+#define	MCFSIM_CSCR1		0x7a		/* CS 1 Control reg (r/w) */
+#define	MCFSIM_CSAR2		0x7c		/* CS 2 Address reg (r/w) */
+#define	MCFSIM_CSMR2		0x80		/* CS 2 Mask reg (r/w) */
+#define	MCFSIM_CSCR2		0x86		/* CS 2 Control reg (r/w) */
+#define	MCFSIM_CSAR3		0x88		/* CS 3 Address reg (r/w) */
+#define	MCFSIM_CSMR3		0x8c		/* CS 3 Mask reg (r/w) */
+#define	MCFSIM_CSCR3		0x92		/* CS 3 Control reg (r/w) */
+#define	MCFSIM_CSAR4		0x94		/* CS 4 Address reg (r/w) */
+#define	MCFSIM_CSMR4		0x98		/* CS 4 Mask reg (r/w) */
+#define	MCFSIM_CSCR4		0x9e		/* CS 4 Control reg (r/w) */
+#define	MCFSIM_CSAR5		0xa0		/* CS 5 Address reg (r/w) */
+#define	MCFSIM_CSMR5		0xa4		/* CS 5 Mask reg (r/w) */
+#define	MCFSIM_CSCR5		0xaa		/* CS 5 Control reg (r/w) */
+#define	MCFSIM_CSAR6		0xac		/* CS 6 Address reg (r/w) */
+#define	MCFSIM_CSMR6		0xb0		/* CS 6 Mask reg (r/w) */
+#define	MCFSIM_CSCR6		0xb6		/* CS 6 Control reg (r/w) */
+#define	MCFSIM_CSAR7		0xb8		/* CS 7 Address reg (r/w) */
+#define	MCFSIM_CSMR7		0xbc		/* CS 7 Mask reg (r/w) */
+#define	MCFSIM_CSCR7		0xc2		/* CS 7 Control reg (r/w) */
+#define	MCFSIM_DMCR		0xc6		/* Default control */
+
+#ifdef CONFIG_M5206e
+#define	MCFSIM_PAR		0xca		/* Pin Assignment reg (r/w) */
+#else
+#define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
+#endif
+
+#define	MCFSIM_PADDR		0x1c5		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x1c9		/* Parallel Port Value (r/w) */
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR_DREQ0        0x100           /* Set to select DREQ0 input */
+                                                /* Clear to select T0 input */
+#define MCFSIM_PAR_DREQ1        0x200           /* Select DREQ1 input */
+                                                /* Clear to select T0 output */
+#endif
+
+/*
+ *	Some symbol defines for the Interrupt Control Register
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR8	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR9	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR10	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR12	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR13	/* UART 2 ICR */
+#ifdef CONFIG_M5206e
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR14	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
+#endif
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_MASKALL	0xfffe		/* All SIM intr sources */
+#endif
+
+/*
+ *	Macro to get and set IMR register. It is 16 bits on the 5206.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
+
+#define	mcf_getipr()		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+#endif	/* m5206sim_h */
diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h
new file mode 100644
index 00000000000..49d016e6391
--- /dev/null
+++ b/arch/m68knommu/include/asm/m520xsim.h
@@ -0,0 +1,63 @@
+/****************************************************************************/
+
+/*
+ *  m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
+ *
+ *  (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
+ */
+
+/****************************************************************************/
+#ifndef m520xsim_h
+#define m520xsim_h
+/****************************************************************************/
+
+
+/*
+ *  Define the 5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
+#define MCFINTC_ICR0        0x40        /* Base ICR register */
+
+#define MCFINT_VECBASE      64
+#define MCFINT_UART0        26          /* Interrupt number for UART0 */
+#define MCFINT_UART1        27          /* Interrupt number for UART1 */
+#define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
+#define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
+
+/*
+ *  SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR         0x000a8000	/* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR         0x000a8004	/* SDRAM Control Register */
+#define MCFSIM_SDCFG1       0x000a8008	/* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2       0x000a800c	/* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
+
+
+#define MCF_GPIO_PAR_UART                   (0xA4036)
+#define MCF_GPIO_PAR_FECI2C                 (0xA4033)
+#define MCF_GPIO_PAR_FEC                    (0xA4038)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD1         (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1         (0x0080)
+
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
+
+#define ICR_INTRCONF		0x05
+#define MCFPIT_IMR		MCFINTC_IMRL
+#define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
+
+/****************************************************************************/
+#endif  /* m520xsim_h */
diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h
new file mode 100644
index 00000000000..bf397313e93
--- /dev/null
+++ b/arch/m68knommu/include/asm/m523xsim.h
@@ -0,0 +1,45 @@
+/****************************************************************************/
+
+/*
+ *	m523xsim.h -- ColdFire 523x System Integration Module support.
+ *
+ *	(C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef	m523xsim_h
+#define	m523xsim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 523x SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
+#define MCFINT_QSPI		18		/* Interrupt number for QSPI */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+
+/****************************************************************************/
+#endif	/* m523xsim_h */
diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h
new file mode 100644
index 00000000000..366eb8602d2
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5249sim.h
@@ -0,0 +1,209 @@
+/****************************************************************************/
+
+/*
+ *	m5249sim.h -- ColdFire 5249 System Integration Module support.
+ *
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m5249sim_h
+#define	m5249sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5249 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+/*
+ *	General purpose IO registers (in MBAR2).
+ */
+#define	MCFSIM2_GPIOREAD	0x0		/* GPIO read values */
+#define	MCFSIM2_GPIOWRITE	0x4		/* GPIO write values */
+#define	MCFSIM2_GPIOENABLE	0x8		/* GPIO enabled */
+#define	MCFSIM2_GPIOFUNC	0xc		/* GPIO function */
+#define	MCFSIM2_GPIO1READ	0xb0		/* GPIO1 read values */
+#define	MCFSIM2_GPIO1WRITE	0xb4		/* GPIO1 write values */
+#define	MCFSIM2_GPIO1ENABLE	0xb8		/* GPIO1 enabled */
+#define	MCFSIM2_GPIO1FUNC	0xbc		/* GPIO1 function */
+
+#define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
+#define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
+#define	MCFSIM2_GPIOINTENABLE	0xc4		/* GPIO interrupt enable */
+
+#define	MCFSIM2_INTLEVEL1	0x140		/* Interrupt level reg 1 */
+#define	MCFSIM2_INTLEVEL2	0x144		/* Interrupt level reg 2 */
+#define	MCFSIM2_INTLEVEL3	0x148		/* Interrupt level reg 3 */
+#define	MCFSIM2_INTLEVEL4	0x14c		/* Interrupt level reg 4 */
+#define	MCFSIM2_INTLEVEL5	0x150		/* Interrupt level reg 5 */
+#define	MCFSIM2_INTLEVEL6	0x154		/* Interrupt level reg 6 */
+#define	MCFSIM2_INTLEVEL7	0x158		/* Interrupt level reg 7 */
+#define	MCFSIM2_INTLEVEL8	0x15c		/* Interrupt level reg 8 */
+
+#define	MCFSIM2_DMAROUTE	0x188		/* DMA routing */
+
+#define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
+#define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
+
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5249.
+ */
+#define	MCFSIM_IMR_MASKALL	0x7fffe		/* All SIM intr sources */
+
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+
+/*
+ *	The M5249C3 board needs a little help getting all its SIM devices
+ *	initialized at kernel start time. dBUG doesn't set much up, so
+ *	we need to do it manually.
+ */
+.macro m5249c3_setup
+	/*
+	 *	Set MBAR1 and MBAR2, just incase they are not set.
+	 */
+	movel	#0x10000001,%a0
+	movec	%a0,%MBAR			/* map MBAR region */
+	subql	#1,%a0				/* get MBAR address in a0 */
+
+	movel	#0x80000001,%a1
+	movec	%a1,#3086			/* map MBAR2 region */
+	subql	#1,%a1				/* get MBAR2 address in a1 */
+
+	/*
+	 *      Move secondary interrupts to base at 128.
+	 */
+	moveb	#0x80,%d0
+	moveb	%d0,0x16b(%a1)			/* interrupt base register */
+
+	/*
+	 *      Work around broken CSMR0/DRAM vector problem.
+	 */
+	movel	#0x001F0021,%d0			/* disable C/I bit */
+	movel	%d0,0x84(%a0)			/* set CSMR0 */
+
+	/*
+	 *	Disable the PLL firstly. (Who knows what state it is
+	 *	in here!).
+	 */
+	movel	0x180(%a1),%d0			/* get current PLL value */
+	andl	#0xfffffffe,%d0			/* PLL bypass first */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	nop
+
+#if CONFIG_CLOCK_FREQ == 140000000
+	/*
+	 *	Set initial clock frequency. This assumes M5249C3 board
+	 *	is fitted with 11.2896MHz crystal. It will program the
+	 *	PLL for 140MHz. Lets go fast :-)
+	 */
+	movel	#0x125a40f0,%d0			/* set for 140MHz */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	orl	#0x1,%d0
+	movel	%d0,0x180(%a1)			/* set PLL register */
+#endif
+
+	/*
+	 *	Setup CS1 for ethernet controller.
+	 *	(Setup as per M5249C3 doco).
+	 */
+	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
+	movel  %d0,0x8c(%a0)
+	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
+	movel  %d0,0x90(%a0)
+	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
+	movew  %d0,0x96(%a0)
+
+	/*
+	 *	Setup CS2 for IDE interface.
+	 */
+	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
+	movel	%d0,0x98(%a0)
+	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
+	movel	%d0,0x9c(%a0)
+	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
+	movew	%d0,0xa2(%a0)
+
+	movel	#0x00107000,%d0			/* IDEconfig1 */
+	movel	%d0,0x18c(%a1)
+	movel	#0x000c0400,%d0			/* IDEconfig2 */
+	movel	%d0,0x190(%a1)
+
+	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
+	orl	%d0,0xc(%a1)			/* function GPIO19 */
+	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
+        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
+.endm
+
+#define	PLATFORM_SETUP	m5249c3_setup
+
+#endif /* __ASSEMBLER__ */
+
+/****************************************************************************/
+#endif	/* m5249sim_h */
diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h
new file mode 100644
index 00000000000..6217edc2113
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5272sim.h
@@ -0,0 +1,78 @@
+/****************************************************************************/
+
+/*
+ *	m5272sim.h -- ColdFire 5272 System Integration Module support.
+ *
+ *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	m5272sim_h
+#define	m5272sim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 5272 SIM register set addresses.
+ */
+#define	MCFSIM_SCR		0x04		/* SIM Config reg (r/w) */
+#define	MCFSIM_SPR		0x06		/* System Protection reg (r/w)*/
+#define	MCFSIM_PMR		0x08		/* Power Management reg (r/w) */
+#define	MCFSIM_APMR		0x0e		/* Active Low Power reg (r/w) */
+#define	MCFSIM_DIR		0x10		/* Device Identity reg (r/w) */
+
+#define	MCFSIM_ICR1		0x20		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x24		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x28		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x2c		/* Intr Ctrl reg 4 (r/w) */
+
+#define MCFSIM_ISR		0x30		/* Interrupt Source reg (r/w) */
+#define MCFSIM_PITR		0x34		/* Interrupt Transition (r/w) */
+#define	MCFSIM_PIWR		0x38		/* Interrupt Wakeup reg (r/w) */
+#define	MCFSIM_PIVR		0x3f		/* Interrupt Vector reg (r/w( */
+
+#define	MCFSIM_WRRR		0x280		/* Watchdog reference (r/w) */
+#define	MCFSIM_WIRR		0x284		/* Watchdog interrupt (r/w) */
+#define	MCFSIM_WCR		0x288		/* Watchdog counter (r/w) */
+#define	MCFSIM_WER		0x28c		/* Watchdog event (r/w) */
+
+#define	MCFSIM_CSBR0		0x40		/* CS0 Base Address (r/w) */
+#define	MCFSIM_CSOR0		0x44		/* CS0 Option (r/w) */
+#define	MCFSIM_CSBR1		0x48		/* CS1 Base Address (r/w) */
+#define	MCFSIM_CSOR1		0x4c		/* CS1 Option (r/w) */
+#define	MCFSIM_CSBR2		0x50		/* CS2 Base Address (r/w) */
+#define	MCFSIM_CSOR2		0x54		/* CS2 Option (r/w) */
+#define	MCFSIM_CSBR3		0x58		/* CS3 Base Address (r/w) */
+#define	MCFSIM_CSOR3		0x5c		/* CS3 Option (r/w) */
+#define	MCFSIM_CSBR4		0x60		/* CS4 Base Address (r/w) */
+#define	MCFSIM_CSOR4		0x64		/* CS4 Option (r/w) */
+#define	MCFSIM_CSBR5		0x68		/* CS5 Base Address (r/w) */
+#define	MCFSIM_CSOR5		0x6c		/* CS5 Option (r/w) */
+#define	MCFSIM_CSBR6		0x70		/* CS6 Base Address (r/w) */
+#define	MCFSIM_CSOR6		0x74		/* CS6 Option (r/w) */
+#define	MCFSIM_CSBR7		0x78		/* CS7 Base Address (r/w) */
+#define	MCFSIM_CSOR7		0x7c		/* CS7 Option (r/w) */
+
+#define	MCFSIM_SDCR		0x180		/* SDRAM Configuration (r/w) */
+#define	MCFSIM_SDTR		0x184		/* SDRAM Timing (r/w) */
+#define	MCFSIM_DCAR0		0x4c		/* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DCMR0		0x50		/* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCCR0		0x57		/* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DCAR1		0x58		/* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
+
+#define	MCFSIM_PACNT		0x80		/* Port A Control (r/w) */
+#define	MCFSIM_PADDR		0x84		/* Port A Direction (r/w) */
+#define	MCFSIM_PADAT		0x86		/* Port A Data (r/w) */
+#define	MCFSIM_PBCNT		0x88		/* Port B Control (r/w) */
+#define	MCFSIM_PBDDR		0x8c		/* Port B Direction (r/w) */
+#define	MCFSIM_PBDAT		0x8e		/* Port B Data (r/w) */
+#define	MCFSIM_PCDDR		0x94		/* Port C Direction (r/w) */
+#define	MCFSIM_PCDAT		0x96		/* Port C Data (r/w) */
+#define	MCFSIM_PDCNT		0x98		/* Port D Control (r/w) */
+
+
+/****************************************************************************/
+#endif	/* m5272sim_h */
diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h
new file mode 100644
index 00000000000..1f63ab3fb3e
--- /dev/null
+++ b/arch/m68knommu/include/asm/m527xsim.h
@@ -0,0 +1,74 @@
+/****************************************************************************/
+
+/*
+ *	m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
+ *
+ *	(C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m527xsim_h
+#define	m527xsim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 5270/5271 SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
+#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
+#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271
+#define	MCFSIM_DCR		0x40		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+#endif
+#ifdef CONFIG_M5275
+#define	MCFSIM_DMR		0x40		/* SDRAM mode */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DCFG1		0x48		/* SDRAM configuration 1 */
+#define	MCFSIM_DCFG2		0x4c		/* SDRAM configuration 2 */
+#define	MCFSIM_DBAR0		0x50		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x54		/* SDRAM address mask 0 */
+#define	MCFSIM_DBAR1		0x58		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
+#endif
+
+/*
+ *	GPIO pins setups to enable the UARTs.
+ */
+#ifdef CONFIG_M5271
+#define MCF_GPIO_PAR_UART	0x100048	/* PAR UART address */
+#define UART0_ENABLE_MASK	0x000f
+#define UART1_ENABLE_MASK	0x0ff0
+#define UART2_ENABLE_MASK	0x3000
+#endif
+#ifdef CONFIG_M5275
+#define MCF_GPIO_PAR_UART	0x10007c	/* PAR UART address */
+#define UART0_ENABLE_MASK	0x000f
+#define UART1_ENABLE_MASK	0x00f0
+#define UART2_ENABLE_MASK	0x3f00 
+#endif
+
+/****************************************************************************/
+#endif	/* m527xsim_h */
diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h
new file mode 100644
index 00000000000..28bf783a5d6
--- /dev/null
+++ b/arch/m68knommu/include/asm/m528xsim.h
@@ -0,0 +1,159 @@
+/****************************************************************************/
+
+/*
+ *	m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
+ *
+ *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m528xsim_h
+#define	m528xsim_h
+/****************************************************************************/
+
+
+/*
+ *	Define the 5280/5282 SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+
+/*
+ *	Derek Cheung - 6 Feb 2005
+ *		add I2C and QSPI register definition using Freescale's MCF5282
+ */
+/* set Port AS pin for I2C or UART */
+#define MCF5282_GPIO_PASPAR     (volatile u16 *) (MCF_IPSBAR + 0x00100056)
+
+/* Port UA Pin Assignment Register (8 Bit) */
+#define MCF5282_GPIO_PUAPAR	0x10005C
+
+/* Interrupt Mask Register Register Low */ 
+#define MCF5282_INTC0_IMRL      (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
+/* Interrupt Control Register 7 */
+#define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
+
+
+
+/*********************************************************************
+*
+* Inter-IC (I2C) Module
+*
+*********************************************************************/
+/* Read/Write access macros for general use */
+#define MCF5282_I2C_I2ADR       (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address 
+#define MCF5282_I2C_I2FDR       (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
+#define MCF5282_I2C_I2CR        (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
+#define MCF5282_I2C_I2SR        (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
+#define MCF5282_I2C_I2DR        (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF5282_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
+
+#define MCF5282_I2C_I2FDR_IC(x)                         (((x)&0x3F))
+
+#define MCF5282_I2C_I2CR_IEN    (0x80)	// I2C enable
+#define MCF5282_I2C_I2CR_IIEN   (0x40)  // interrupt enable
+#define MCF5282_I2C_I2CR_MSTA   (0x20)  // master/slave mode
+#define MCF5282_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
+#define MCF5282_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
+#define MCF5282_I2C_I2CR_RSTA   (0x04)  // repeat start
+
+#define MCF5282_I2C_I2SR_ICF    (0x80)  // data transfer bit
+#define MCF5282_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
+#define MCF5282_I2C_I2SR_IBB    (0x20)  // I2C bus busy
+#define MCF5282_I2C_I2SR_IAL    (0x10)  // aribitration lost
+#define MCF5282_I2C_I2SR_SRW    (0x04)  // slave read/write
+#define MCF5282_I2C_I2SR_IIF    (0x02)  // I2C interrupt
+#define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
+
+
+
+/*********************************************************************
+*
+* Queued Serial Peripheral Interface (QSPI) Module
+*
+*********************************************************************/
+/* Derek - 21 Feb 2005 */
+/* change to the format used in I2C */
+/* Read/Write access macros for general use */
+#define MCF5282_QSPI_QMR        MCF_IPSBAR + 0x0340
+#define MCF5282_QSPI_QDLYR      MCF_IPSBAR + 0x0344
+#define MCF5282_QSPI_QWR        MCF_IPSBAR + 0x0348
+#define MCF5282_QSPI_QIR        MCF_IPSBAR + 0x034C
+#define MCF5282_QSPI_QAR        MCF_IPSBAR + 0x0350
+#define MCF5282_QSPI_QDR        MCF_IPSBAR + 0x0354
+#define MCF5282_QSPI_QCR        MCF_IPSBAR + 0x0354
+
+/* Bit level definitions and macros */
+#define MCF5282_QSPI_QMR_MSTR                           (0x8000)
+#define MCF5282_QSPI_QMR_DOHIE                          (0x4000)
+#define MCF5282_QSPI_QMR_BITS_16                        (0x0000)
+#define MCF5282_QSPI_QMR_BITS_8                         (0x2000)
+#define MCF5282_QSPI_QMR_BITS_9                         (0x2400)
+#define MCF5282_QSPI_QMR_BITS_10                        (0x2800)
+#define MCF5282_QSPI_QMR_BITS_11                        (0x2C00)
+#define MCF5282_QSPI_QMR_BITS_12                        (0x3000)
+#define MCF5282_QSPI_QMR_BITS_13                        (0x3400)
+#define MCF5282_QSPI_QMR_BITS_14                        (0x3800)
+#define MCF5282_QSPI_QMR_BITS_15                        (0x3C00)
+#define MCF5282_QSPI_QMR_CPOL                           (0x0200)
+#define MCF5282_QSPI_QMR_CPHA                           (0x0100)
+#define MCF5282_QSPI_QMR_BAUD(x)                        (((x)&0x00FF))
+
+#define MCF5282_QSPI_QDLYR_SPE                          (0x80)
+#define MCF5282_QSPI_QDLYR_QCD(x)                       (((x)&0x007F)<<8)
+#define MCF5282_QSPI_QDLYR_DTL(x)                       (((x)&0x00FF))
+
+#define MCF5282_QSPI_QWR_HALT                           (0x8000)
+#define MCF5282_QSPI_QWR_WREN                           (0x4000)
+#define MCF5282_QSPI_QWR_WRTO                           (0x2000)
+#define MCF5282_QSPI_QWR_CSIV                           (0x1000)
+#define MCF5282_QSPI_QWR_ENDQP(x)                       (((x)&0x000F)<<8)
+#define MCF5282_QSPI_QWR_CPTQP(x)                       (((x)&0x000F)<<4)
+#define MCF5282_QSPI_QWR_NEWQP(x)                       (((x)&0x000F))
+
+#define MCF5282_QSPI_QIR_WCEFB                          (0x8000)
+#define MCF5282_QSPI_QIR_ABRTB                          (0x4000)
+#define MCF5282_QSPI_QIR_ABRTL                          (0x1000)
+#define MCF5282_QSPI_QIR_WCEFE                          (0x0800)
+#define MCF5282_QSPI_QIR_ABRTE                          (0x0400)
+#define MCF5282_QSPI_QIR_SPIFE                          (0x0100)
+#define MCF5282_QSPI_QIR_WCEF                           (0x0008)
+#define MCF5282_QSPI_QIR_ABRT                           (0x0004)
+#define MCF5282_QSPI_QIR_SPIF                           (0x0001)
+
+#define MCF5282_QSPI_QAR_ADDR(x)                        (((x)&0x003F))
+
+#define MCF5282_QSPI_QDR_COMMAND(x)                     (((x)&0xFF00))
+#define MCF5282_QSPI_QCR_DATA(x)                        (((x)&0x00FF)<<8)
+#define MCF5282_QSPI_QCR_CONT                           (0x8000)
+#define MCF5282_QSPI_QCR_BITSE                          (0x4000)
+#define MCF5282_QSPI_QCR_DT                             (0x2000)
+#define MCF5282_QSPI_QCR_DSCK                           (0x1000)
+#define MCF5282_QSPI_QCR_CS                             (((x)&0x000F)<<8)
+
+/****************************************************************************/
+#endif	/* m528xsim_h */
diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h
new file mode 100644
index 00000000000..5886728409c
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5307sim.h
@@ -0,0 +1,181 @@
+/****************************************************************************/
+
+/*
+ *	m5307sim.h -- ColdFire 5307 System Integration Module support.
+ *
+ *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *	(C) Copyright 1999,  Lineo (www.lineo.com)
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef	m5307sim_h
+#define	m5307sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5307 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+
+#ifdef CONFIG_OLDMASK
+#define MCFSIM_CSBAR		0x98		/* CS Base Address reg (r/w) */
+#define MCFSIM_CSBAMR		0x9c		/* CS Base Mask reg (r/w) */
+#define MCFSIM_CSMR2		0x9e		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSMR3		0xaa		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSMR4		0xb6		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSMR5		0xc2		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSMR6		0xce		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#else
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#endif /* CONFIG_OLDMASK */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+
+
+/* Definition offset address for CS2-7  -- old mask 5307 */
+
+#define	MCF5307_CS2		(0x400000)
+#define	MCF5307_CS3		(0x600000)
+#define	MCF5307_CS4		(0x800000)
+#define	MCF5307_CS5		(0xA00000)
+#define	MCF5307_CS6		(0xC00000)
+#define	MCF5307_CS7		(0xE00000)
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+#if defined(CONFIG_M5307)
+#define	MCFSIM_IMR_MASKALL	0x3fffe		/* All SIM intr sources */
+#endif
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4	0x80
+#define IRQ3_LEVEL6	0x40
+#define IRQ1_LEVEL2	0x20
+
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_EC			(1<<31)
+#define	CACR_ESB		(1<<29)
+#define	CACR_DPI		(1<<28)
+#define	CACR_HLCK		(1<<27)
+#define	CACR_CINVA		(1<<24)
+#define	CACR_DNFB		(1<<10)
+#define	CACR_DCM_WTHRU		(0<<8)
+#define	CACR_DCM_WBACK		(1<<8)
+#define	CACR_DCM_OFF_PRE	(2<<8)
+#define	CACR_DCM_OFF_IMP	(3<<8)
+#define	CACR_DW			(1<<5)
+
+#define	ACR_BASE_POS		24
+#define	ACR_MASK_POS		16
+#define	ACR_ENABLE		(1<<15)
+#define	ACR_USER		(0<<13)
+#define	ACR_SUPER		(1<<13)
+#define	ACR_ANY			(2<<13)
+#define	ACR_CM_WTHRU		(0<<5)
+#define	ACR_CM_WBACK		(1<<5)
+#define	ACR_CM_OFF_PRE		(2<<5)
+#define	ACR_CM_OFF_IMP		(3<<5)
+#define	ACR_WPROTECT		(1<<2)
+
+/****************************************************************************/
+#endif	/* m5307sim_h */
diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h
new file mode 100644
index 00000000000..1835fd20a82
--- /dev/null
+++ b/arch/m68knommu/include/asm/m532xsim.h
@@ -0,0 +1,2238 @@
+/****************************************************************************/
+
+/*
+ *	m532xsim.h -- ColdFire 5329 registers
+ */
+
+/****************************************************************************/
+#ifndef	m532xsim_h
+#define	m532xsim_h
+/****************************************************************************/
+
+#define MCF_REG32(x) (*(volatile unsigned long  *)(x))
+#define MCF_REG16(x) (*(volatile unsigned short *)(x))
+#define MCF_REG08(x) (*(volatile unsigned char  *)(x))
+
+#define MCFINT_VECBASE      64
+#define MCFINT_UART0        26          /* Interrupt number for UART0 */
+#define MCFINT_UART1        27          /* Interrupt number for UART1 */
+
+#define MCF_WTM_WCR	MCF_REG16(0xFC098000)
+
+/*
+ *	Define the 532x SIM register set addresses.
+ */
+#define	MCFSIM_IPRL		0xFC048004
+#define	MCFSIM_IPRH		0xFC048000
+#define	MCFSIM_IPR		MCFSIM_IPRL
+#define	MCFSIM_IMRL		0xFC04800C
+#define	MCFSIM_IMRH		0xFC048008
+#define	MCFSIM_IMR		MCFSIM_IMRL
+#define	MCFSIM_ICR0		0xFC048040	
+#define	MCFSIM_ICR1		0xFC048041	
+#define	MCFSIM_ICR2		0xFC048042	
+#define	MCFSIM_ICR3		0xFC048043	
+#define	MCFSIM_ICR4		0xFC048044	
+#define	MCFSIM_ICR5		0xFC048045	
+#define	MCFSIM_ICR6		0xFC048046	
+#define	MCFSIM_ICR7		0xFC048047	
+#define	MCFSIM_ICR8		0xFC048048	
+#define	MCFSIM_ICR9		0xFC048049	
+#define	MCFSIM_ICR10		0xFC04804A
+#define	MCFSIM_ICR11		0xFC04804B
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+
+#define	MCFSIM_IMR_MASKALL	0xFFFFFFFF	/* All SIM intr sources */
+
+#define MCFSIM_IMR_SIMR0	0xFC04801C
+#define MCFSIM_IMR_SIMR1	0xFC04C01C
+#define MCFSIM_IMR_CIMR0	0xFC04801D
+#define MCFSIM_IMR_CIMR1	0xFC04C01D
+
+#define MCFSIM_ICR_TIMER1	(0xFC048040+32)
+#define MCFSIM_ICR_TIMER2	(0xFC048040+33)
+
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+#define	mcf_getiprl()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
+
+#define	mcf_getiprh()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
+
+
+#define mcf_enable_irq0(irq)		\
+	*((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
+
+#define mcf_enable_irq1(irq)		\
+	*((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
+
+#define mcf_disable_irq0(irq)		\
+	*((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
+
+#define mcf_disable_irq1(irq)		\
+	*((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_EC			(1<<31)
+#define	CACR_ESB		(1<<29)
+#define	CACR_DPI		(1<<28)
+#define	CACR_HLCK		(1<<27)
+#define	CACR_CINVA		(1<<24)
+#define	CACR_DNFB		(1<<10)
+#define	CACR_DCM_WTHRU		(0<<8)
+#define	CACR_DCM_WBACK		(1<<8)
+#define	CACR_DCM_OFF_PRE	(2<<8)
+#define	CACR_DCM_OFF_IMP	(3<<8)
+#define	CACR_DW			(1<<5)
+
+#define	ACR_BASE_POS		24
+#define	ACR_MASK_POS		16
+#define	ACR_ENABLE		(1<<15)
+#define	ACR_USER		(0<<13)
+#define	ACR_SUPER		(1<<13)
+#define	ACR_ANY			(2<<13)
+#define	ACR_CM_WTHRU		(0<<5)
+#define	ACR_CM_WBACK		(1<<5)
+#define	ACR_CM_OFF_PRE		(2<<5)
+#define	ACR_CM_OFF_IMP		(3<<5)
+#define	ACR_WPROTECT		(1<<2)
+
+/*********************************************************************
+ *
+ * Inter-IC (I2C) Module
+ *
+ *********************************************************************/
+
+/* Read/Write access macros for general use */
+#define MCF532x_I2C_I2ADR       (volatile u8 *) (0xFC058000) // Address 
+#define MCF532x_I2C_I2FDR       (volatile u8 *) (0xFC058004) // Freq Divider
+#define MCF532x_I2C_I2CR        (volatile u8 *) (0xFC058008) // Control
+#define MCF532x_I2C_I2SR        (volatile u8 *) (0xFC05800C) // Status
+#define MCF532x_I2C_I2DR        (volatile u8 *) (0xFC058010) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF532x_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
+
+#define MCF532x_I2C_I2FDR_IC(x)                         (((x)&0x3F))
+
+#define MCF532x_I2C_I2CR_IEN    (0x80)	// I2C enable
+#define MCF532x_I2C_I2CR_IIEN   (0x40)  // interrupt enable
+#define MCF532x_I2C_I2CR_MSTA   (0x20)  // master/slave mode
+#define MCF532x_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
+#define MCF532x_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
+#define MCF532x_I2C_I2CR_RSTA   (0x04)  // repeat start
+
+#define MCF532x_I2C_I2SR_ICF    (0x80)  // data transfer bit
+#define MCF532x_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
+#define MCF532x_I2C_I2SR_IBB    (0x20)  // I2C bus busy
+#define MCF532x_I2C_I2SR_IAL    (0x10)  // aribitration lost
+#define MCF532x_I2C_I2SR_SRW    (0x04)  // slave read/write
+#define MCF532x_I2C_I2SR_IIF    (0x02)  // I2C interrupt
+#define MCF532x_I2C_I2SR_RXAK   (0x01)  // received acknowledge
+
+#define MCF532x_PAR_FECI2C	(volatile u8 *) (0xFC0A4053)
+
+
+/*
+ *	The M5329EVB board needs a help getting its devices initialized 
+ *	at kernel start time if dBUG doesn't set it up (for example 
+ *	it is not used), so we need to do it manually.
+ */
+#ifdef __ASSEMBLER__
+.macro m5329EVB_setup
+	movel	#0xFC098000, %a7
+	movel	#0x0, (%a7)
+#define CORE_SRAM	0x80000000	
+#define CORE_SRAM_SIZE	0x8000
+	movel	#CORE_SRAM, %d0
+	addl	#0x221, %d0
+	movec	%d0,%RAMBAR1
+	movel	#CORE_SRAM, %sp
+	addl	#CORE_SRAM_SIZE, %sp
+	jsr	sysinit
+.endm
+#define	PLATFORM_SETUP	m5329EVB_setup
+
+#endif /* __ASSEMBLER__ */
+
+/*********************************************************************
+ *
+ * Chip Configuration Module (CCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_CCM_CCR               MCF_REG16(0xFC0A0004)
+#define MCF_CCM_RCON              MCF_REG16(0xFC0A0008)
+#define MCF_CCM_CIR               MCF_REG16(0xFC0A000A)
+#define MCF_CCM_MISCCR            MCF_REG16(0xFC0A0010)
+#define MCF_CCM_CDR               MCF_REG16(0xFC0A0012)
+#define MCF_CCM_UHCSR             MCF_REG16(0xFC0A0014)
+#define MCF_CCM_UOCSR             MCF_REG16(0xFC0A0016)
+
+/* Bit definitions and macros for MCF_CCM_CCR */
+#define MCF_CCM_CCR_RESERVED      (0x0001)
+#define MCF_CCM_CCR_PLL_MODE      (0x0003)
+#define MCF_CCM_CCR_OSC_MODE      (0x0005)
+#define MCF_CCM_CCR_BOOTPS(x)     (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_CCR_LOAD          (0x0021)
+#define MCF_CCM_CCR_LIMP          (0x0041)
+#define MCF_CCM_CCR_CSC(x)        (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_RCON */
+#define MCF_CCM_RCON_RESERVED     (0x0001)
+#define MCF_CCM_RCON_PLL_MODE     (0x0003)
+#define MCF_CCM_RCON_OSC_MODE     (0x0005)
+#define MCF_CCM_RCON_BOOTPS(x)    (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_RCON_LOAD         (0x0021)
+#define MCF_CCM_RCON_LIMP         (0x0041)
+#define MCF_CCM_RCON_CSC(x)       (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_CIR */
+#define MCF_CCM_CIR_PRN(x)        (((x)&0x003F)<<0)
+#define MCF_CCM_CIR_PIN(x)        (((x)&0x03FF)<<6)
+
+/* Bit definitions and macros for MCF_CCM_MISCCR */
+#define MCF_CCM_MISCCR_USBSRC     (0x0001)
+#define MCF_CCM_MISCCR_USBDIV     (0x0002)
+#define MCF_CCM_MISCCR_SSI_SRC    (0x0010)
+#define MCF_CCM_MISCCR_TIM_DMA   (0x0020)
+#define MCF_CCM_MISCCR_SSI_PUS    (0x0040)
+#define MCF_CCM_MISCCR_SSI_PUE    (0x0080)
+#define MCF_CCM_MISCCR_LCD_CHEN   (0x0100)
+#define MCF_CCM_MISCCR_LIMP       (0x1000)
+#define MCF_CCM_MISCCR_PLL_LOCK   (0x2000)
+
+/* Bit definitions and macros for MCF_CCM_CDR */
+#define MCF_CCM_CDR_SSIDIV(x)     (((x)&0x000F)<<0)
+#define MCF_CCM_CDR_LPDIV(x)      (((x)&0x000F)<<8)
+
+/* Bit definitions and macros for MCF_CCM_UHCSR */
+#define MCF_CCM_UHCSR_XPDE        (0x0001)
+#define MCF_CCM_UHCSR_UHMIE       (0x0002)
+#define MCF_CCM_UHCSR_WKUP        (0x0004)
+#define MCF_CCM_UHCSR_PORTIND(x)  (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_CCM_UOCSR */
+#define MCF_CCM_UOCSR_XPDE        (0x0001)
+#define MCF_CCM_UOCSR_UOMIE       (0x0002)
+#define MCF_CCM_UOCSR_WKUP        (0x0004)
+#define MCF_CCM_UOCSR_PWRFLT      (0x0008)
+#define MCF_CCM_UOCSR_SEND        (0x0010)
+#define MCF_CCM_UOCSR_VVLD        (0x0020)
+#define MCF_CCM_UOCSR_BVLD        (0x0040)
+#define MCF_CCM_UOCSR_AVLD        (0x0080)
+#define MCF_CCM_UOCSR_DPPU        (0x0100)
+#define MCF_CCM_UOCSR_DCR_VBUS    (0x0200)
+#define MCF_CCM_UOCSR_CRG_VBUS    (0x0400)
+#define MCF_CCM_UOCSR_DRV_VBUS    (0x0800)
+#define MCF_CCM_UOCSR_DMPD        (0x1000)
+#define MCF_CCM_UOCSR_DPPD        (0x2000)
+#define MCF_CCM_UOCSR_PORTIND(x)  (((x)&0x0003)<<14)
+
+/*********************************************************************
+ *
+ * DMA Timers (DTIM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_DTIM0_DTMR           MCF_REG16(0xFC070000)
+#define MCF_DTIM0_DTXMR          MCF_REG08(0xFC070002)
+#define MCF_DTIM0_DTER           MCF_REG08(0xFC070003)
+#define MCF_DTIM0_DTRR           MCF_REG32(0xFC070004)
+#define MCF_DTIM0_DTCR           MCF_REG32(0xFC070008)
+#define MCF_DTIM0_DTCN           MCF_REG32(0xFC07000C)
+#define MCF_DTIM1_DTMR           MCF_REG16(0xFC074000)
+#define MCF_DTIM1_DTXMR          MCF_REG08(0xFC074002)
+#define MCF_DTIM1_DTER           MCF_REG08(0xFC074003)
+#define MCF_DTIM1_DTRR           MCF_REG32(0xFC074004)
+#define MCF_DTIM1_DTCR           MCF_REG32(0xFC074008)
+#define MCF_DTIM1_DTCN           MCF_REG32(0xFC07400C)
+#define MCF_DTIM2_DTMR           MCF_REG16(0xFC078000)
+#define MCF_DTIM2_DTXMR          MCF_REG08(0xFC078002)
+#define MCF_DTIM2_DTER           MCF_REG08(0xFC078003)
+#define MCF_DTIM2_DTRR           MCF_REG32(0xFC078004)
+#define MCF_DTIM2_DTCR           MCF_REG32(0xFC078008)
+#define MCF_DTIM2_DTCN           MCF_REG32(0xFC07800C)
+#define MCF_DTIM3_DTMR           MCF_REG16(0xFC07C000)
+#define MCF_DTIM3_DTXMR          MCF_REG08(0xFC07C002)
+#define MCF_DTIM3_DTER           MCF_REG08(0xFC07C003)
+#define MCF_DTIM3_DTRR           MCF_REG32(0xFC07C004)
+#define MCF_DTIM3_DTCR           MCF_REG32(0xFC07C008)
+#define MCF_DTIM3_DTCN           MCF_REG32(0xFC07C00C)
+#define MCF_DTIM_DTMR(x)         MCF_REG16(0xFC070000+((x)*0x4000))
+#define MCF_DTIM_DTXMR(x)        MCF_REG08(0xFC070002+((x)*0x4000))
+#define MCF_DTIM_DTER(x)         MCF_REG08(0xFC070003+((x)*0x4000))
+#define MCF_DTIM_DTRR(x)         MCF_REG32(0xFC070004+((x)*0x4000))
+#define MCF_DTIM_DTCR(x)         MCF_REG32(0xFC070008+((x)*0x4000))
+#define MCF_DTIM_DTCN(x)         MCF_REG32(0xFC07000C+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_DTIM_DTMR */
+#define MCF_DTIM_DTMR_RST        (0x0001)
+#define MCF_DTIM_DTMR_CLK(x)     (((x)&0x0003)<<1)
+#define MCF_DTIM_DTMR_FRR        (0x0008)
+#define MCF_DTIM_DTMR_ORRI       (0x0010)
+#define MCF_DTIM_DTMR_OM         (0x0020)
+#define MCF_DTIM_DTMR_CE(x)      (((x)&0x0003)<<6)
+#define MCF_DTIM_DTMR_PS(x)      (((x)&0x00FF)<<8)
+#define MCF_DTIM_DTMR_CE_ANY     (0x00C0)
+#define MCF_DTIM_DTMR_CE_FALL    (0x0080)
+#define MCF_DTIM_DTMR_CE_RISE    (0x0040)
+#define MCF_DTIM_DTMR_CE_NONE    (0x0000)
+#define MCF_DTIM_DTMR_CLK_DTIN   (0x0006)
+#define MCF_DTIM_DTMR_CLK_DIV16  (0x0004)
+#define MCF_DTIM_DTMR_CLK_DIV1   (0x0002)
+#define MCF_DTIM_DTMR_CLK_STOP   (0x0000)
+
+/* Bit definitions and macros for MCF_DTIM_DTXMR */
+#define MCF_DTIM_DTXMR_MODE16    (0x01)
+#define MCF_DTIM_DTXMR_DMAEN     (0x80)
+
+/* Bit definitions and macros for MCF_DTIM_DTER */
+#define MCF_DTIM_DTER_CAP        (0x01)
+#define MCF_DTIM_DTER_REF        (0x02)
+
+/* Bit definitions and macros for MCF_DTIM_DTRR */
+#define MCF_DTIM_DTRR_REF(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCR */
+#define MCF_DTIM_DTCR_CAP(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCN */
+#define MCF_DTIM_DTCN_CNT(x)     (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * FlexBus Chip Selects (FBCS)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_FBCS0_CSAR		MCF_REG32(0xFC008000)
+#define MCF_FBCS0_CSMR		MCF_REG32(0xFC008004)
+#define MCF_FBCS0_CSCR		MCF_REG32(0xFC008008)
+#define MCF_FBCS1_CSAR		MCF_REG32(0xFC00800C)
+#define MCF_FBCS1_CSMR		MCF_REG32(0xFC008010)
+#define MCF_FBCS1_CSCR		MCF_REG32(0xFC008014)
+#define MCF_FBCS2_CSAR		MCF_REG32(0xFC008018)
+#define MCF_FBCS2_CSMR		MCF_REG32(0xFC00801C)
+#define MCF_FBCS2_CSCR		MCF_REG32(0xFC008020)
+#define MCF_FBCS3_CSAR		MCF_REG32(0xFC008024)
+#define MCF_FBCS3_CSMR		MCF_REG32(0xFC008028)
+#define MCF_FBCS3_CSCR		MCF_REG32(0xFC00802C)
+#define MCF_FBCS4_CSAR		MCF_REG32(0xFC008030)
+#define MCF_FBCS4_CSMR		MCF_REG32(0xFC008034)
+#define MCF_FBCS4_CSCR		MCF_REG32(0xFC008038)
+#define MCF_FBCS5_CSAR		MCF_REG32(0xFC00803C)
+#define MCF_FBCS5_CSMR		MCF_REG32(0xFC008040)
+#define MCF_FBCS5_CSCR		MCF_REG32(0xFC008044)
+#define MCF_FBCS_CSAR(x)	MCF_REG32(0xFC008000+((x)*0x00C))
+#define MCF_FBCS_CSMR(x)	MCF_REG32(0xFC008004+((x)*0x00C))
+#define MCF_FBCS_CSCR(x)	MCF_REG32(0xFC008008+((x)*0x00C))
+
+/* Bit definitions and macros for MCF_FBCS_CSAR */
+#define MCF_FBCS_CSAR_BA(x)	((x)&0xFFFF0000)
+
+/* Bit definitions and macros for MCF_FBCS_CSMR */
+#define MCF_FBCS_CSMR_V		(0x00000001)
+#define MCF_FBCS_CSMR_WP	(0x00000100)
+#define MCF_FBCS_CSMR_BAM(x)	(((x)&0x0000FFFF)<<16)
+#define MCF_FBCS_CSMR_BAM_4G	(0xFFFF0000)
+#define MCF_FBCS_CSMR_BAM_2G	(0x7FFF0000)
+#define MCF_FBCS_CSMR_BAM_1G	(0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_1024M	(0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_512M	(0x1FFF0000)
+#define MCF_FBCS_CSMR_BAM_256M	(0x0FFF0000)
+#define MCF_FBCS_CSMR_BAM_128M	(0x07FF0000)
+#define MCF_FBCS_CSMR_BAM_64M	(0x03FF0000)
+#define MCF_FBCS_CSMR_BAM_32M	(0x01FF0000)
+#define MCF_FBCS_CSMR_BAM_16M	(0x00FF0000)
+#define MCF_FBCS_CSMR_BAM_8M	(0x007F0000)
+#define MCF_FBCS_CSMR_BAM_4M	(0x003F0000)
+#define MCF_FBCS_CSMR_BAM_2M	(0x001F0000)
+#define MCF_FBCS_CSMR_BAM_1M	(0x000F0000)
+#define MCF_FBCS_CSMR_BAM_1024K	(0x000F0000)
+#define MCF_FBCS_CSMR_BAM_512K	(0x00070000)
+#define MCF_FBCS_CSMR_BAM_256K	(0x00030000)
+#define MCF_FBCS_CSMR_BAM_128K	(0x00010000)
+#define MCF_FBCS_CSMR_BAM_64K	(0x00000000)
+
+/* Bit definitions and macros for MCF_FBCS_CSCR */
+#define MCF_FBCS_CSCR_BSTW	(0x00000008)
+#define MCF_FBCS_CSCR_BSTR	(0x00000010)
+#define MCF_FBCS_CSCR_BEM	(0x00000020)
+#define MCF_FBCS_CSCR_PS(x)	(((x)&0x00000003)<<6)
+#define MCF_FBCS_CSCR_AA	(0x00000100)
+#define MCF_FBCS_CSCR_SBM	(0x00000200)
+#define MCF_FBCS_CSCR_WS(x)	(((x)&0x0000003F)<<10)
+#define MCF_FBCS_CSCR_WRAH(x)	(((x)&0x00000003)<<16)
+#define MCF_FBCS_CSCR_RDAH(x)	(((x)&0x00000003)<<18)
+#define MCF_FBCS_CSCR_ASET(x)	(((x)&0x00000003)<<20)
+#define MCF_FBCS_CSCR_SWSEN	(0x00800000)
+#define MCF_FBCS_CSCR_SWS(x)	(((x)&0x0000003F)<<26)
+#define MCF_FBCS_CSCR_PS_8	(0x0040)
+#define MCF_FBCS_CSCR_PS_16	(0x0080)
+#define MCF_FBCS_CSCR_PS_32	(0x0000)
+
+/*********************************************************************
+ *
+ * General Purpose I/O (GPIO)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_GPIO_PODR_FECH		MCF_REG08(0xFC0A4000)
+#define MCF_GPIO_PODR_FECL		MCF_REG08(0xFC0A4001)
+#define MCF_GPIO_PODR_SSI		MCF_REG08(0xFC0A4002)
+#define MCF_GPIO_PODR_BUSCTL		MCF_REG08(0xFC0A4003)
+#define MCF_GPIO_PODR_BE		MCF_REG08(0xFC0A4004)
+#define MCF_GPIO_PODR_CS		MCF_REG08(0xFC0A4005)
+#define MCF_GPIO_PODR_PWM		MCF_REG08(0xFC0A4006)
+#define MCF_GPIO_PODR_FECI2C		MCF_REG08(0xFC0A4007)
+#define MCF_GPIO_PODR_UART		MCF_REG08(0xFC0A4009)
+#define MCF_GPIO_PODR_QSPI		MCF_REG08(0xFC0A400A)
+#define MCF_GPIO_PODR_TIMER		MCF_REG08(0xFC0A400B)
+#define MCF_GPIO_PODR_LCDDATAH		MCF_REG08(0xFC0A400D)
+#define MCF_GPIO_PODR_LCDDATAM		MCF_REG08(0xFC0A400E)
+#define MCF_GPIO_PODR_LCDDATAL		MCF_REG08(0xFC0A400F)
+#define MCF_GPIO_PODR_LCDCTLH		MCF_REG08(0xFC0A4010)
+#define MCF_GPIO_PODR_LCDCTLL		MCF_REG08(0xFC0A4011)
+#define MCF_GPIO_PDDR_FECH		MCF_REG08(0xFC0A4014)
+#define MCF_GPIO_PDDR_FECL		MCF_REG08(0xFC0A4015)
+#define MCF_GPIO_PDDR_SSI		MCF_REG08(0xFC0A4016)
+#define MCF_GPIO_PDDR_BUSCTL		MCF_REG08(0xFC0A4017)
+#define MCF_GPIO_PDDR_BE		MCF_REG08(0xFC0A4018)
+#define MCF_GPIO_PDDR_CS		MCF_REG08(0xFC0A4019)
+#define MCF_GPIO_PDDR_PWM		MCF_REG08(0xFC0A401A)
+#define MCF_GPIO_PDDR_FECI2C		MCF_REG08(0xFC0A401B)
+#define MCF_GPIO_PDDR_UART		MCF_REG08(0xFC0A401C)
+#define MCF_GPIO_PDDR_QSPI		MCF_REG08(0xFC0A401E)
+#define MCF_GPIO_PDDR_TIMER		MCF_REG08(0xFC0A401F)
+#define MCF_GPIO_PDDR_LCDDATAH		MCF_REG08(0xFC0A4021)
+#define MCF_GPIO_PDDR_LCDDATAM		MCF_REG08(0xFC0A4022)
+#define MCF_GPIO_PDDR_LCDDATAL		MCF_REG08(0xFC0A4023)
+#define MCF_GPIO_PDDR_LCDCTLH		MCF_REG08(0xFC0A4024)
+#define MCF_GPIO_PDDR_LCDCTLL		MCF_REG08(0xFC0A4025)
+#define MCF_GPIO_PPDSDR_FECH		MCF_REG08(0xFC0A4028)
+#define MCF_GPIO_PPDSDR_FECL		MCF_REG08(0xFC0A4029)
+#define MCF_GPIO_PPDSDR_SSI		MCF_REG08(0xFC0A402A)
+#define MCF_GPIO_PPDSDR_BUSCTL		MCF_REG08(0xFC0A402B)
+#define MCF_GPIO_PPDSDR_BE		MCF_REG08(0xFC0A402C)
+#define MCF_GPIO_PPDSDR_CS		MCF_REG08(0xFC0A402D)
+#define MCF_GPIO_PPDSDR_PWM		MCF_REG08(0xFC0A402E)
+#define MCF_GPIO_PPDSDR_FECI2C		MCF_REG08(0xFC0A402F)
+#define MCF_GPIO_PPDSDR_UART		MCF_REG08(0xFC0A4031)
+#define MCF_GPIO_PPDSDR_QSPI		MCF_REG08(0xFC0A4032)
+#define MCF_GPIO_PPDSDR_TIMER		MCF_REG08(0xFC0A4033)
+#define MCF_GPIO_PPDSDR_LCDDATAH	MCF_REG08(0xFC0A4035)
+#define MCF_GPIO_PPDSDR_LCDDATAM	MCF_REG08(0xFC0A4036)
+#define MCF_GPIO_PPDSDR_LCDDATAL	MCF_REG08(0xFC0A4037)
+#define MCF_GPIO_PPDSDR_LCDCTLH		MCF_REG08(0xFC0A4038)
+#define MCF_GPIO_PPDSDR_LCDCTLL		MCF_REG08(0xFC0A4039)
+#define MCF_GPIO_PCLRR_FECH		MCF_REG08(0xFC0A403C)
+#define MCF_GPIO_PCLRR_FECL		MCF_REG08(0xFC0A403D)
+#define MCF_GPIO_PCLRR_SSI		MCF_REG08(0xFC0A403E)
+#define MCF_GPIO_PCLRR_BUSCTL		MCF_REG08(0xFC0A403F)
+#define MCF_GPIO_PCLRR_BE		MCF_REG08(0xFC0A4040)
+#define MCF_GPIO_PCLRR_CS		MCF_REG08(0xFC0A4041)
+#define MCF_GPIO_PCLRR_PWM		MCF_REG08(0xFC0A4042)
+#define MCF_GPIO_PCLRR_FECI2C		MCF_REG08(0xFC0A4043)
+#define MCF_GPIO_PCLRR_UART		MCF_REG08(0xFC0A4045)
+#define MCF_GPIO_PCLRR_QSPI		MCF_REG08(0xFC0A4046)
+#define MCF_GPIO_PCLRR_TIMER		MCF_REG08(0xFC0A4047)
+#define MCF_GPIO_PCLRR_LCDDATAH		MCF_REG08(0xFC0A4049)
+#define MCF_GPIO_PCLRR_LCDDATAM		MCF_REG08(0xFC0A404A)
+#define MCF_GPIO_PCLRR_LCDDATAL		MCF_REG08(0xFC0A404B)
+#define MCF_GPIO_PCLRR_LCDCTLH		MCF_REG08(0xFC0A404C)
+#define MCF_GPIO_PCLRR_LCDCTLL		MCF_REG08(0xFC0A404D)
+#define MCF_GPIO_PAR_FEC		MCF_REG08(0xFC0A4050)
+#define MCF_GPIO_PAR_PWM		MCF_REG08(0xFC0A4051)
+#define MCF_GPIO_PAR_BUSCTL		MCF_REG08(0xFC0A4052)
+#define MCF_GPIO_PAR_FECI2C		MCF_REG08(0xFC0A4053)
+#define MCF_GPIO_PAR_BE			MCF_REG08(0xFC0A4054)
+#define MCF_GPIO_PAR_CS			MCF_REG08(0xFC0A4055)
+#define MCF_GPIO_PAR_SSI		MCF_REG16(0xFC0A4056)
+#define MCF_GPIO_PAR_UART		MCF_REG16(0xFC0A4058)
+#define MCF_GPIO_PAR_QSPI		MCF_REG16(0xFC0A405A)
+#define MCF_GPIO_PAR_TIMER		MCF_REG08(0xFC0A405C)
+#define MCF_GPIO_PAR_LCDDATA		MCF_REG08(0xFC0A405D)
+#define MCF_GPIO_PAR_LCDCTL		MCF_REG16(0xFC0A405E)
+#define MCF_GPIO_PAR_IRQ		MCF_REG16(0xFC0A4060)
+#define MCF_GPIO_MSCR_FLEXBUS		MCF_REG08(0xFC0A4064)
+#define MCF_GPIO_MSCR_SDRAM		MCF_REG08(0xFC0A4065)
+#define MCF_GPIO_DSCR_I2C		MCF_REG08(0xFC0A4068)
+#define MCF_GPIO_DSCR_PWM		MCF_REG08(0xFC0A4069)
+#define MCF_GPIO_DSCR_FEC		MCF_REG08(0xFC0A406A)
+#define MCF_GPIO_DSCR_UART		MCF_REG08(0xFC0A406B)
+#define MCF_GPIO_DSCR_QSPI		MCF_REG08(0xFC0A406C)
+#define MCF_GPIO_DSCR_TIMER		MCF_REG08(0xFC0A406D)
+#define MCF_GPIO_DSCR_SSI		MCF_REG08(0xFC0A406E)
+#define MCF_GPIO_DSCR_LCD		MCF_REG08(0xFC0A406F)
+#define MCF_GPIO_DSCR_DEBUG		MCF_REG08(0xFC0A4070)
+#define MCF_GPIO_DSCR_CLKRST		MCF_REG08(0xFC0A4071)
+#define MCF_GPIO_DSCR_IRQ		MCF_REG08(0xFC0A4072)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
+#define MCF_GPIO_PODR_FECH_PODR_FECH0              (0x01)
+#define MCF_GPIO_PODR_FECH_PODR_FECH1              (0x02)
+#define MCF_GPIO_PODR_FECH_PODR_FECH2              (0x04)
+#define MCF_GPIO_PODR_FECH_PODR_FECH3              (0x08)
+#define MCF_GPIO_PODR_FECH_PODR_FECH4              (0x10)
+#define MCF_GPIO_PODR_FECH_PODR_FECH5              (0x20)
+#define MCF_GPIO_PODR_FECH_PODR_FECH6              (0x40)
+#define MCF_GPIO_PODR_FECH_PODR_FECH7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
+#define MCF_GPIO_PODR_FECL_PODR_FECL0              (0x01)
+#define MCF_GPIO_PODR_FECL_PODR_FECL1              (0x02)
+#define MCF_GPIO_PODR_FECL_PODR_FECL2              (0x04)
+#define MCF_GPIO_PODR_FECL_PODR_FECL3              (0x08)
+#define MCF_GPIO_PODR_FECL_PODR_FECL4              (0x10)
+#define MCF_GPIO_PODR_FECL_PODR_FECL5              (0x20)
+#define MCF_GPIO_PODR_FECL_PODR_FECL6              (0x40)
+#define MCF_GPIO_PODR_FECL_PODR_FECL7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
+#define MCF_GPIO_PODR_SSI_PODR_SSI0                (0x01)
+#define MCF_GPIO_PODR_SSI_PODR_SSI1                (0x02)
+#define MCF_GPIO_PODR_SSI_PODR_SSI2                (0x04)
+#define MCF_GPIO_PODR_SSI_PODR_SSI3                (0x08)
+#define MCF_GPIO_PODR_SSI_PODR_SSI4                (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
+#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0         (0x01)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1          (0x02)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2          (0x04)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BE */
+#define MCF_GPIO_PODR_BE_PODR_BE0                  (0x01)
+#define MCF_GPIO_PODR_BE_PODR_BE1                  (0x02)
+#define MCF_GPIO_PODR_BE_PODR_BE2                  (0x04)
+#define MCF_GPIO_PODR_BE_PODR_BE3                  (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_CS */
+#define MCF_GPIO_PODR_CS_PODR_CS1                  (0x02)
+#define MCF_GPIO_PODR_CS_PODR_CS2                  (0x04)
+#define MCF_GPIO_PODR_CS_PODR_CS3                  (0x08)
+#define MCF_GPIO_PODR_CS_PODR_CS4                  (0x10)
+#define MCF_GPIO_PODR_CS_PODR_CS5                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
+#define MCF_GPIO_PODR_PWM_PODR_PWM2                (0x04)
+#define MCF_GPIO_PODR_PWM_PODR_PWM3                (0x08)
+#define MCF_GPIO_PODR_PWM_PODR_PWM4                (0x10)
+#define MCF_GPIO_PODR_PWM_PODR_PWM5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0          (0x01)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1          (0x02)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2          (0x04)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_UART */
+#define MCF_GPIO_PODR_UART_PODR_UART0              (0x01)
+#define MCF_GPIO_PODR_UART_PODR_UART1              (0x02)
+#define MCF_GPIO_PODR_UART_PODR_UART2              (0x04)
+#define MCF_GPIO_PODR_UART_PODR_UART3              (0x08)
+#define MCF_GPIO_PODR_UART_PODR_UART4              (0x10)
+#define MCF_GPIO_PODR_UART_PODR_UART5              (0x20)
+#define MCF_GPIO_PODR_UART_PODR_UART6              (0x40)
+#define MCF_GPIO_PODR_UART_PODR_UART7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI0              (0x01)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI1              (0x02)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI2              (0x04)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI3              (0x08)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI4              (0x10)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER0            (0x01)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER1            (0x02)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER2            (0x04)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER3            (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1      (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1      (0x02)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2      (0x04)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3      (0x08)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4      (0x10)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5      (0x20)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6      (0x40)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1      (0x02)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2      (0x04)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3      (0x08)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4      (0x10)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5      (0x20)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6      (0x40)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
+#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0        (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0        (0x01)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1        (0x02)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2        (0x04)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3        (0x08)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4        (0x10)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5        (0x20)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6        (0x40)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7        (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH0              (0x01)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH1              (0x02)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH2              (0x04)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH3              (0x08)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH4              (0x10)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH5              (0x20)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH6              (0x40)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL0              (0x01)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL1              (0x02)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL2              (0x04)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL3              (0x08)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL4              (0x10)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL5              (0x20)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL6              (0x40)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI0                (0x01)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI1                (0x02)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI2                (0x04)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI3                (0x08)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI4                (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
+#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0         (0x01)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1          (0x02)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2          (0x04)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
+#define MCF_GPIO_PDDR_BE_PDDR_BE0                  (0x01)
+#define MCF_GPIO_PDDR_BE_PDDR_BE1                  (0x02)
+#define MCF_GPIO_PDDR_BE_PDDR_BE2                  (0x04)
+#define MCF_GPIO_PDDR_BE_PDDR_BE3                  (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
+#define MCF_GPIO_PDDR_CS_PDDR_CS1                  (0x02)
+#define MCF_GPIO_PDDR_CS_PDDR_CS2                  (0x04)
+#define MCF_GPIO_PDDR_CS_PDDR_CS3                  (0x08)
+#define MCF_GPIO_PDDR_CS_PDDR_CS4                  (0x10)
+#define MCF_GPIO_PDDR_CS_PDDR_CS5                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM2                (0x04)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM3                (0x08)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM4                (0x10)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0          (0x01)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1          (0x02)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2          (0x04)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
+#define MCF_GPIO_PDDR_UART_PDDR_UART0              (0x01)
+#define MCF_GPIO_PDDR_UART_PDDR_UART1              (0x02)
+#define MCF_GPIO_PDDR_UART_PDDR_UART2              (0x04)
+#define MCF_GPIO_PDDR_UART_PDDR_UART3              (0x08)
+#define MCF_GPIO_PDDR_UART_PDDR_UART4              (0x10)
+#define MCF_GPIO_PDDR_UART_PDDR_UART5              (0x20)
+#define MCF_GPIO_PDDR_UART_PDDR_UART6              (0x40)
+#define MCF_GPIO_PDDR_UART_PDDR_UART7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0              (0x01)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1              (0x02)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2              (0x04)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3              (0x08)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4              (0x10)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0            (0x01)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1            (0x02)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2            (0x04)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3            (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1      (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1      (0x02)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2      (0x04)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3      (0x08)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4      (0x10)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5      (0x20)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6      (0x40)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1      (0x02)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2      (0x04)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3      (0x08)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4      (0x10)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5      (0x20)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6      (0x40)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
+#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0        (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0        (0x01)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1        (0x02)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2        (0x04)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3        (0x08)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4        (0x10)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5        (0x20)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6        (0x40)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7        (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0          (0x01)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1          (0x02)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2          (0x04)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3          (0x08)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4          (0x10)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5          (0x20)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6          (0x40)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0          (0x01)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1          (0x02)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2          (0x04)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3          (0x08)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4          (0x10)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5          (0x20)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6          (0x40)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0            (0x01)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1            (0x02)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2            (0x04)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3            (0x08)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4            (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
+#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0       (0x01)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1      (0x02)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2      (0x04)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3      (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0              (0x01)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1              (0x02)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2              (0x04)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3              (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1              (0x02)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2              (0x04)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3              (0x08)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4              (0x10)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2            (0x04)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3            (0x08)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4            (0x10)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5            (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0      (0x01)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1      (0x02)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2      (0x04)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3      (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0          (0x01)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1          (0x02)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2          (0x04)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3          (0x08)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4          (0x10)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5          (0x20)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6          (0x40)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0          (0x01)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1          (0x02)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2          (0x04)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3          (0x08)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4          (0x10)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5          (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0        (0x01)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1        (0x02)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2        (0x04)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1  (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1  (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2  (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3  (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4  (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5  (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6  (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7  (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1  (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2  (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3  (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4  (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5  (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6  (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7  (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
+#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0    (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0    (0x01)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1    (0x02)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2    (0x04)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3    (0x08)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4    (0x10)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5    (0x20)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6    (0x40)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0            (0x01)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1            (0x02)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2            (0x04)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3            (0x08)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4            (0x10)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5            (0x20)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6            (0x40)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0            (0x01)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1            (0x02)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2            (0x04)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3            (0x08)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4            (0x10)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5            (0x20)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6            (0x40)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0              (0x01)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1              (0x02)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2              (0x04)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3              (0x08)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4              (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
+#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0        (0x01)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1        (0x02)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2        (0x04)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE0                (0x01)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE1                (0x02)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE2                (0x04)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE3                (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS1                (0x02)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS2                (0x04)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS3                (0x08)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS4                (0x10)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2              (0x04)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3              (0x08)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4              (0x10)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0        (0x01)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1        (0x02)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2        (0x04)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART0            (0x01)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART1            (0x02)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART2            (0x04)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART3            (0x08)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART4            (0x10)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART5            (0x20)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART6            (0x40)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0            (0x01)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1            (0x02)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2            (0x04)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3            (0x08)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4            (0x10)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5            (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0          (0x01)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1          (0x02)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2          (0x04)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1    (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1    (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2    (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3    (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4    (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5    (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6    (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1    (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2    (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3    (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4    (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5    (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6    (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
+#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0      (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0      (0x01)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1      (0x02)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2      (0x04)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3      (0x08)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4      (0x10)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5      (0x20)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6      (0x40)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x)            (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO           (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1          (0x04)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC            (0x0C)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO          (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART          (0x01)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC           (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
+#define MCF_GPIO_PAR_PWM_PAR_PWM1(x)               (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_PWM_PAR_PWM3(x)               (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_PWM_PAR_PWM5                  (0x10)
+#define MCF_GPIO_PAR_PWM_PAR_PWM7                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x)              (((x)&0x03)<<3)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB                (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA                 (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE                 (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE              (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA              (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO           (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB            (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0           (0x10)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS              (0x18)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x)             (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x)            (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x)             (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2          (0x40)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL            (0x80)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC           (0xC0)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO          (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2         (0x10)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA           (0x20)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO         (0x30)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2          (0x04)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL            (0x0C)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2          (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA            (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BE */
+#define MCF_GPIO_PAR_BE_PAR_BE0                    (0x01)
+#define MCF_GPIO_PAR_BE_PAR_BE1                    (0x02)
+#define MCF_GPIO_PAR_BE_PAR_BE2                    (0x04)
+#define MCF_GPIO_PAR_BE_PAR_BE3                    (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_CS */
+#define MCF_GPIO_PAR_CS_PAR_CS1                    (0x02)
+#define MCF_GPIO_PAR_CS_PAR_CS2                    (0x04)
+#define MCF_GPIO_PAR_CS_PAR_CS3                    (0x08)
+#define MCF_GPIO_PAR_CS_PAR_CS4                    (0x10)
+#define MCF_GPIO_PAR_CS_PAR_CS5                    (0x20)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO            (0x00)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1           (0x01)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1             (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
+#define MCF_GPIO_PAR_SSI_PAR_MCLK                  (0x0080)
+#define MCF_GPIO_PAR_SSI_PAR_TXD(x)                (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_SSI_PAR_RXD(x)                (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_SSI_PAR_FS(x)                 (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_SSI_PAR_BCLK(x)               (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_UART */
+#define MCF_GPIO_PAR_UART_PAR_UTXD0                (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_URXD0                (0x0002)
+#define MCF_GPIO_PAR_UART_PAR_URTS0                (0x0004)
+#define MCF_GPIO_PAR_UART_PAR_UCTS0                (0x0008)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1(x)             (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_UART_PAR_URXD1(x)             (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_UART_PAR_URTS1(x)             (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1(x)             (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK       (0x0800)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7        (0x0400)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1          (0x0C00)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS         (0x0200)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6        (0x0100)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1          (0x0300)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD        (0x0080)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5        (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1          (0x00C0)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD        (0x0020)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4        (0x0010)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1          (0x0030)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
+#define MCF_GPIO_PAR_QSPI_PAR_SCK(x)               (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x)              (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_QSPI_PAR_DIN(x)               (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x)              (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x)              (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x)              (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x)             (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x)             (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x)             (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3          (0x80)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2          (0x40)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3           (0xC0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2          (0x20)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2          (0x10)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2           (0x30)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1          (0x08)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1          (0x04)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1           (0x0C)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0          (0x02)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0          (0x01)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0           (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x)          (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x)         (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x)           (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x)           (((x)&0x03)<<6)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
+#define MCF_GPIO_PAR_LCDCTL_PAR_CLS                (0x0001)
+#define MCF_GPIO_PAR_LCDCTL_PAR_PS                 (0x0002)
+#define MCF_GPIO_PAR_LCDCTL_PAR_REV                (0x0004)
+#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR            (0x0008)
+#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST           (0x0010)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK              (0x0020)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC           (0x0040)
+#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC          (0x0080)
+#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE             (0x0100)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x)               (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x)               (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x)               (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x)               (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x)               (((x)&0x0003)<<12)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x)      (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x)       (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x)       (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x)          (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x)          (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x)         (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
+#define MCF_GPIO_DSCR_I2C_I2C_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
+#define MCF_GPIO_DSCR_PWM_PWM_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
+#define MCF_GPIO_DSCR_FEC_FEC_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
+#define MCF_GPIO_DSCR_UART_UART0_DSE(x)            (((x)&0x03)<<0)
+#define MCF_GPIO_DSCR_UART_UART1_DSE(x)            (((x)&0x03)<<2)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
+#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x)             (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
+#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x)           (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
+#define MCF_GPIO_DSCR_SSI_SSI_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
+#define MCF_GPIO_DSCR_LCD_LCD_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
+#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x)           (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
+#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x)         (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
+#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x)               (((x)&0x03)<<0)
+
+/*********************************************************************
+ *
+ * Interrupt Controller (INTC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_INTC0_IPRH             MCF_REG32(0xFC048000)
+#define MCF_INTC0_IPRL             MCF_REG32(0xFC048004)
+#define MCF_INTC0_IMRH             MCF_REG32(0xFC048008)
+#define MCF_INTC0_IMRL             MCF_REG32(0xFC04800C)
+#define MCF_INTC0_INTFRCH          MCF_REG32(0xFC048010)
+#define MCF_INTC0_INTFRCL          MCF_REG32(0xFC048014)
+#define MCF_INTC0_ICONFIG          MCF_REG16(0xFC04801A)
+#define MCF_INTC0_SIMR             MCF_REG08(0xFC04801C)
+#define MCF_INTC0_CIMR             MCF_REG08(0xFC04801D)
+#define MCF_INTC0_CLMASK           MCF_REG08(0xFC04801E)
+#define MCF_INTC0_SLMASK           MCF_REG08(0xFC04801F)
+#define MCF_INTC0_ICR0             MCF_REG08(0xFC048040)
+#define MCF_INTC0_ICR1             MCF_REG08(0xFC048041)
+#define MCF_INTC0_ICR2             MCF_REG08(0xFC048042)
+#define MCF_INTC0_ICR3             MCF_REG08(0xFC048043)
+#define MCF_INTC0_ICR4             MCF_REG08(0xFC048044)
+#define MCF_INTC0_ICR5             MCF_REG08(0xFC048045)
+#define MCF_INTC0_ICR6             MCF_REG08(0xFC048046)
+#define MCF_INTC0_ICR7             MCF_REG08(0xFC048047)
+#define MCF_INTC0_ICR8             MCF_REG08(0xFC048048)
+#define MCF_INTC0_ICR9             MCF_REG08(0xFC048049)
+#define MCF_INTC0_ICR10            MCF_REG08(0xFC04804A)
+#define MCF_INTC0_ICR11            MCF_REG08(0xFC04804B)
+#define MCF_INTC0_ICR12            MCF_REG08(0xFC04804C)
+#define MCF_INTC0_ICR13            MCF_REG08(0xFC04804D)
+#define MCF_INTC0_ICR14            MCF_REG08(0xFC04804E)
+#define MCF_INTC0_ICR15            MCF_REG08(0xFC04804F)
+#define MCF_INTC0_ICR16            MCF_REG08(0xFC048050)
+#define MCF_INTC0_ICR17            MCF_REG08(0xFC048051)
+#define MCF_INTC0_ICR18            MCF_REG08(0xFC048052)
+#define MCF_INTC0_ICR19            MCF_REG08(0xFC048053)
+#define MCF_INTC0_ICR20            MCF_REG08(0xFC048054)
+#define MCF_INTC0_ICR21            MCF_REG08(0xFC048055)
+#define MCF_INTC0_ICR22            MCF_REG08(0xFC048056)
+#define MCF_INTC0_ICR23            MCF_REG08(0xFC048057)
+#define MCF_INTC0_ICR24            MCF_REG08(0xFC048058)
+#define MCF_INTC0_ICR25            MCF_REG08(0xFC048059)
+#define MCF_INTC0_ICR26            MCF_REG08(0xFC04805A)
+#define MCF_INTC0_ICR27            MCF_REG08(0xFC04805B)
+#define MCF_INTC0_ICR28            MCF_REG08(0xFC04805C)
+#define MCF_INTC0_ICR29            MCF_REG08(0xFC04805D)
+#define MCF_INTC0_ICR30            MCF_REG08(0xFC04805E)
+#define MCF_INTC0_ICR31            MCF_REG08(0xFC04805F)
+#define MCF_INTC0_ICR32            MCF_REG08(0xFC048060)
+#define MCF_INTC0_ICR33            MCF_REG08(0xFC048061)
+#define MCF_INTC0_ICR34            MCF_REG08(0xFC048062)
+#define MCF_INTC0_ICR35            MCF_REG08(0xFC048063)
+#define MCF_INTC0_ICR36            MCF_REG08(0xFC048064)
+#define MCF_INTC0_ICR37            MCF_REG08(0xFC048065)
+#define MCF_INTC0_ICR38            MCF_REG08(0xFC048066)
+#define MCF_INTC0_ICR39            MCF_REG08(0xFC048067)
+#define MCF_INTC0_ICR40            MCF_REG08(0xFC048068)
+#define MCF_INTC0_ICR41            MCF_REG08(0xFC048069)
+#define MCF_INTC0_ICR42            MCF_REG08(0xFC04806A)
+#define MCF_INTC0_ICR43            MCF_REG08(0xFC04806B)
+#define MCF_INTC0_ICR44            MCF_REG08(0xFC04806C)
+#define MCF_INTC0_ICR45            MCF_REG08(0xFC04806D)
+#define MCF_INTC0_ICR46            MCF_REG08(0xFC04806E)
+#define MCF_INTC0_ICR47            MCF_REG08(0xFC04806F)
+#define MCF_INTC0_ICR48            MCF_REG08(0xFC048070)
+#define MCF_INTC0_ICR49            MCF_REG08(0xFC048071)
+#define MCF_INTC0_ICR50            MCF_REG08(0xFC048072)
+#define MCF_INTC0_ICR51            MCF_REG08(0xFC048073)
+#define MCF_INTC0_ICR52            MCF_REG08(0xFC048074)
+#define MCF_INTC0_ICR53            MCF_REG08(0xFC048075)
+#define MCF_INTC0_ICR54            MCF_REG08(0xFC048076)
+#define MCF_INTC0_ICR55            MCF_REG08(0xFC048077)
+#define MCF_INTC0_ICR56            MCF_REG08(0xFC048078)
+#define MCF_INTC0_ICR57            MCF_REG08(0xFC048079)
+#define MCF_INTC0_ICR58            MCF_REG08(0xFC04807A)
+#define MCF_INTC0_ICR59            MCF_REG08(0xFC04807B)
+#define MCF_INTC0_ICR60            MCF_REG08(0xFC04807C)
+#define MCF_INTC0_ICR61            MCF_REG08(0xFC04807D)
+#define MCF_INTC0_ICR62            MCF_REG08(0xFC04807E)
+#define MCF_INTC0_ICR63            MCF_REG08(0xFC04807F)
+#define MCF_INTC0_ICR(x)           MCF_REG08(0xFC048040+((x)*0x001))
+#define MCF_INTC0_SWIACK           MCF_REG08(0xFC0480E0)
+#define MCF_INTC0_L1IACK           MCF_REG08(0xFC0480E4)
+#define MCF_INTC0_L2IACK           MCF_REG08(0xFC0480E8)
+#define MCF_INTC0_L3IACK           MCF_REG08(0xFC0480EC)
+#define MCF_INTC0_L4IACK           MCF_REG08(0xFC0480F0)
+#define MCF_INTC0_L5IACK           MCF_REG08(0xFC0480F4)
+#define MCF_INTC0_L6IACK           MCF_REG08(0xFC0480F8)
+#define MCF_INTC0_L7IACK           MCF_REG08(0xFC0480FC)
+#define MCF_INTC0_LIACK(x)         MCF_REG08(0xFC0480E4+((x)*0x004))
+#define MCF_INTC1_IPRH             MCF_REG32(0xFC04C000)
+#define MCF_INTC1_IPRL             MCF_REG32(0xFC04C004)
+#define MCF_INTC1_IMRH             MCF_REG32(0xFC04C008)
+#define MCF_INTC1_IMRL             MCF_REG32(0xFC04C00C)
+#define MCF_INTC1_INTFRCH          MCF_REG32(0xFC04C010)
+#define MCF_INTC1_INTFRCL          MCF_REG32(0xFC04C014)
+#define MCF_INTC1_ICONFIG          MCF_REG16(0xFC04C01A)
+#define MCF_INTC1_SIMR             MCF_REG08(0xFC04C01C)
+#define MCF_INTC1_CIMR             MCF_REG08(0xFC04C01D)
+#define MCF_INTC1_CLMASK           MCF_REG08(0xFC04C01E)
+#define MCF_INTC1_SLMASK           MCF_REG08(0xFC04C01F)
+#define MCF_INTC1_ICR0             MCF_REG08(0xFC04C040)
+#define MCF_INTC1_ICR1             MCF_REG08(0xFC04C041)
+#define MCF_INTC1_ICR2             MCF_REG08(0xFC04C042)
+#define MCF_INTC1_ICR3             MCF_REG08(0xFC04C043)
+#define MCF_INTC1_ICR4             MCF_REG08(0xFC04C044)
+#define MCF_INTC1_ICR5             MCF_REG08(0xFC04C045)
+#define MCF_INTC1_ICR6             MCF_REG08(0xFC04C046)
+#define MCF_INTC1_ICR7             MCF_REG08(0xFC04C047)
+#define MCF_INTC1_ICR8             MCF_REG08(0xFC04C048)
+#define MCF_INTC1_ICR9             MCF_REG08(0xFC04C049)
+#define MCF_INTC1_ICR10            MCF_REG08(0xFC04C04A)
+#define MCF_INTC1_ICR11            MCF_REG08(0xFC04C04B)
+#define MCF_INTC1_ICR12            MCF_REG08(0xFC04C04C)
+#define MCF_INTC1_ICR13            MCF_REG08(0xFC04C04D)
+#define MCF_INTC1_ICR14            MCF_REG08(0xFC04C04E)
+#define MCF_INTC1_ICR15            MCF_REG08(0xFC04C04F)
+#define MCF_INTC1_ICR16            MCF_REG08(0xFC04C050)
+#define MCF_INTC1_ICR17            MCF_REG08(0xFC04C051)
+#define MCF_INTC1_ICR18            MCF_REG08(0xFC04C052)
+#define MCF_INTC1_ICR19            MCF_REG08(0xFC04C053)
+#define MCF_INTC1_ICR20            MCF_REG08(0xFC04C054)
+#define MCF_INTC1_ICR21            MCF_REG08(0xFC04C055)
+#define MCF_INTC1_ICR22            MCF_REG08(0xFC04C056)
+#define MCF_INTC1_ICR23            MCF_REG08(0xFC04C057)
+#define MCF_INTC1_ICR24            MCF_REG08(0xFC04C058)
+#define MCF_INTC1_ICR25            MCF_REG08(0xFC04C059)
+#define MCF_INTC1_ICR26            MCF_REG08(0xFC04C05A)
+#define MCF_INTC1_ICR27            MCF_REG08(0xFC04C05B)
+#define MCF_INTC1_ICR28            MCF_REG08(0xFC04C05C)
+#define MCF_INTC1_ICR29            MCF_REG08(0xFC04C05D)
+#define MCF_INTC1_ICR30            MCF_REG08(0xFC04C05E)
+#define MCF_INTC1_ICR31            MCF_REG08(0xFC04C05F)
+#define MCF_INTC1_ICR32            MCF_REG08(0xFC04C060)
+#define MCF_INTC1_ICR33            MCF_REG08(0xFC04C061)
+#define MCF_INTC1_ICR34            MCF_REG08(0xFC04C062)
+#define MCF_INTC1_ICR35            MCF_REG08(0xFC04C063)
+#define MCF_INTC1_ICR36            MCF_REG08(0xFC04C064)
+#define MCF_INTC1_ICR37            MCF_REG08(0xFC04C065)
+#define MCF_INTC1_ICR38            MCF_REG08(0xFC04C066)
+#define MCF_INTC1_ICR39            MCF_REG08(0xFC04C067)
+#define MCF_INTC1_ICR40            MCF_REG08(0xFC04C068)
+#define MCF_INTC1_ICR41            MCF_REG08(0xFC04C069)
+#define MCF_INTC1_ICR42            MCF_REG08(0xFC04C06A)
+#define MCF_INTC1_ICR43            MCF_REG08(0xFC04C06B)
+#define MCF_INTC1_ICR44            MCF_REG08(0xFC04C06C)
+#define MCF_INTC1_ICR45            MCF_REG08(0xFC04C06D)
+#define MCF_INTC1_ICR46            MCF_REG08(0xFC04C06E)
+#define MCF_INTC1_ICR47            MCF_REG08(0xFC04C06F)
+#define MCF_INTC1_ICR48            MCF_REG08(0xFC04C070)
+#define MCF_INTC1_ICR49            MCF_REG08(0xFC04C071)
+#define MCF_INTC1_ICR50            MCF_REG08(0xFC04C072)
+#define MCF_INTC1_ICR51            MCF_REG08(0xFC04C073)
+#define MCF_INTC1_ICR52            MCF_REG08(0xFC04C074)
+#define MCF_INTC1_ICR53            MCF_REG08(0xFC04C075)
+#define MCF_INTC1_ICR54            MCF_REG08(0xFC04C076)
+#define MCF_INTC1_ICR55            MCF_REG08(0xFC04C077)
+#define MCF_INTC1_ICR56            MCF_REG08(0xFC04C078)
+#define MCF_INTC1_ICR57            MCF_REG08(0xFC04C079)
+#define MCF_INTC1_ICR58            MCF_REG08(0xFC04C07A)
+#define MCF_INTC1_ICR59            MCF_REG08(0xFC04C07B)
+#define MCF_INTC1_ICR60            MCF_REG08(0xFC04C07C)
+#define MCF_INTC1_ICR61            MCF_REG08(0xFC04C07D)
+#define MCF_INTC1_ICR62            MCF_REG08(0xFC04C07E)
+#define MCF_INTC1_ICR63            MCF_REG08(0xFC04C07F)
+#define MCF_INTC1_ICR(x)           MCF_REG08(0xFC04C040+((x)*0x001))
+#define MCF_INTC1_SWIACK           MCF_REG08(0xFC04C0E0)
+#define MCF_INTC1_L1IACK           MCF_REG08(0xFC04C0E4)
+#define MCF_INTC1_L2IACK           MCF_REG08(0xFC04C0E8)
+#define MCF_INTC1_L3IACK           MCF_REG08(0xFC04C0EC)
+#define MCF_INTC1_L4IACK           MCF_REG08(0xFC04C0F0)
+#define MCF_INTC1_L5IACK           MCF_REG08(0xFC04C0F4)
+#define MCF_INTC1_L6IACK           MCF_REG08(0xFC04C0F8)
+#define MCF_INTC1_L7IACK           MCF_REG08(0xFC04C0FC)
+#define MCF_INTC1_LIACK(x)         MCF_REG08(0xFC04C0E4+((x)*0x004))
+#define MCF_INTC_IPRH(x)           MCF_REG32(0xFC048000+((x)*0x4000))
+#define MCF_INTC_IPRL(x)           MCF_REG32(0xFC048004+((x)*0x4000))
+#define MCF_INTC_IMRH(x)           MCF_REG32(0xFC048008+((x)*0x4000))
+#define MCF_INTC_IMRL(x)           MCF_REG32(0xFC04800C+((x)*0x4000))
+#define MCF_INTC_INTFRCH(x)        MCF_REG32(0xFC048010+((x)*0x4000))
+#define MCF_INTC_INTFRCL(x)        MCF_REG32(0xFC048014+((x)*0x4000))
+#define MCF_INTC_ICONFIG(x)        MCF_REG16(0xFC04801A+((x)*0x4000))
+#define MCF_INTC_SIMR(x)           MCF_REG08(0xFC04801C+((x)*0x4000))
+#define MCF_INTC_CIMR(x)           MCF_REG08(0xFC04801D+((x)*0x4000))
+#define MCF_INTC_CLMASK(x)         MCF_REG08(0xFC04801E+((x)*0x4000))
+#define MCF_INTC_SLMASK(x)         MCF_REG08(0xFC04801F+((x)*0x4000))
+#define MCF_INTC_ICR0(x)           MCF_REG08(0xFC048040+((x)*0x4000))
+#define MCF_INTC_ICR1(x)           MCF_REG08(0xFC048041+((x)*0x4000))
+#define MCF_INTC_ICR2(x)           MCF_REG08(0xFC048042+((x)*0x4000))
+#define MCF_INTC_ICR3(x)           MCF_REG08(0xFC048043+((x)*0x4000))
+#define MCF_INTC_ICR4(x)           MCF_REG08(0xFC048044+((x)*0x4000))
+#define MCF_INTC_ICR5(x)           MCF_REG08(0xFC048045+((x)*0x4000))
+#define MCF_INTC_ICR6(x)           MCF_REG08(0xFC048046+((x)*0x4000))
+#define MCF_INTC_ICR7(x)           MCF_REG08(0xFC048047+((x)*0x4000))
+#define MCF_INTC_ICR8(x)           MCF_REG08(0xFC048048+((x)*0x4000))
+#define MCF_INTC_ICR9(x)           MCF_REG08(0xFC048049+((x)*0x4000))
+#define MCF_INTC_ICR10(x)          MCF_REG08(0xFC04804A+((x)*0x4000))
+#define MCF_INTC_ICR11(x)          MCF_REG08(0xFC04804B+((x)*0x4000))
+#define MCF_INTC_ICR12(x)          MCF_REG08(0xFC04804C+((x)*0x4000))
+#define MCF_INTC_ICR13(x)          MCF_REG08(0xFC04804D+((x)*0x4000))
+#define MCF_INTC_ICR14(x)          MCF_REG08(0xFC04804E+((x)*0x4000))
+#define MCF_INTC_ICR15(x)          MCF_REG08(0xFC04804F+((x)*0x4000))
+#define MCF_INTC_ICR16(x)          MCF_REG08(0xFC048050+((x)*0x4000))
+#define MCF_INTC_ICR17(x)          MCF_REG08(0xFC048051+((x)*0x4000))
+#define MCF_INTC_ICR18(x)          MCF_REG08(0xFC048052+((x)*0x4000))
+#define MCF_INTC_ICR19(x)          MCF_REG08(0xFC048053+((x)*0x4000))
+#define MCF_INTC_ICR20(x)          MCF_REG08(0xFC048054+((x)*0x4000))
+#define MCF_INTC_ICR21(x)          MCF_REG08(0xFC048055+((x)*0x4000))
+#define MCF_INTC_ICR22(x)          MCF_REG08(0xFC048056+((x)*0x4000))
+#define MCF_INTC_ICR23(x)          MCF_REG08(0xFC048057+((x)*0x4000))
+#define MCF_INTC_ICR24(x)          MCF_REG08(0xFC048058+((x)*0x4000))
+#define MCF_INTC_ICR25(x)          MCF_REG08(0xFC048059+((x)*0x4000))
+#define MCF_INTC_ICR26(x)          MCF_REG08(0xFC04805A+((x)*0x4000))
+#define MCF_INTC_ICR27(x)          MCF_REG08(0xFC04805B+((x)*0x4000))
+#define MCF_INTC_ICR28(x)          MCF_REG08(0xFC04805C+((x)*0x4000))
+#define MCF_INTC_ICR29(x)          MCF_REG08(0xFC04805D+((x)*0x4000))
+#define MCF_INTC_ICR30(x)          MCF_REG08(0xFC04805E+((x)*0x4000))
+#define MCF_INTC_ICR31(x)          MCF_REG08(0xFC04805F+((x)*0x4000))
+#define MCF_INTC_ICR32(x)          MCF_REG08(0xFC048060+((x)*0x4000))
+#define MCF_INTC_ICR33(x)          MCF_REG08(0xFC048061+((x)*0x4000))
+#define MCF_INTC_ICR34(x)          MCF_REG08(0xFC048062+((x)*0x4000))
+#define MCF_INTC_ICR35(x)          MCF_REG08(0xFC048063+((x)*0x4000))
+#define MCF_INTC_ICR36(x)          MCF_REG08(0xFC048064+((x)*0x4000))
+#define MCF_INTC_ICR37(x)          MCF_REG08(0xFC048065+((x)*0x4000))
+#define MCF_INTC_ICR38(x)          MCF_REG08(0xFC048066+((x)*0x4000))
+#define MCF_INTC_ICR39(x)          MCF_REG08(0xFC048067+((x)*0x4000))
+#define MCF_INTC_ICR40(x)          MCF_REG08(0xFC048068+((x)*0x4000))
+#define MCF_INTC_ICR41(x)          MCF_REG08(0xFC048069+((x)*0x4000))
+#define MCF_INTC_ICR42(x)          MCF_REG08(0xFC04806A+((x)*0x4000))
+#define MCF_INTC_ICR43(x)          MCF_REG08(0xFC04806B+((x)*0x4000))
+#define MCF_INTC_ICR44(x)          MCF_REG08(0xFC04806C+((x)*0x4000))
+#define MCF_INTC_ICR45(x)          MCF_REG08(0xFC04806D+((x)*0x4000))
+#define MCF_INTC_ICR46(x)          MCF_REG08(0xFC04806E+((x)*0x4000))
+#define MCF_INTC_ICR47(x)          MCF_REG08(0xFC04806F+((x)*0x4000))
+#define MCF_INTC_ICR48(x)          MCF_REG08(0xFC048070+((x)*0x4000))
+#define MCF_INTC_ICR49(x)          MCF_REG08(0xFC048071+((x)*0x4000))
+#define MCF_INTC_ICR50(x)          MCF_REG08(0xFC048072+((x)*0x4000))
+#define MCF_INTC_ICR51(x)          MCF_REG08(0xFC048073+((x)*0x4000))
+#define MCF_INTC_ICR52(x)          MCF_REG08(0xFC048074+((x)*0x4000))
+#define MCF_INTC_ICR53(x)          MCF_REG08(0xFC048075+((x)*0x4000))
+#define MCF_INTC_ICR54(x)          MCF_REG08(0xFC048076+((x)*0x4000))
+#define MCF_INTC_ICR55(x)          MCF_REG08(0xFC048077+((x)*0x4000))
+#define MCF_INTC_ICR56(x)          MCF_REG08(0xFC048078+((x)*0x4000))
+#define MCF_INTC_ICR57(x)          MCF_REG08(0xFC048079+((x)*0x4000))
+#define MCF_INTC_ICR58(x)          MCF_REG08(0xFC04807A+((x)*0x4000))
+#define MCF_INTC_ICR59(x)          MCF_REG08(0xFC04807B+((x)*0x4000))
+#define MCF_INTC_ICR60(x)          MCF_REG08(0xFC04807C+((x)*0x4000))
+#define MCF_INTC_ICR61(x)          MCF_REG08(0xFC04807D+((x)*0x4000))
+#define MCF_INTC_ICR62(x)          MCF_REG08(0xFC04807E+((x)*0x4000))
+#define MCF_INTC_ICR63(x)          MCF_REG08(0xFC04807F+((x)*0x4000))
+#define MCF_INTC_SWIACK(x)         MCF_REG08(0xFC0480E0+((x)*0x4000))
+#define MCF_INTC_L1IACK(x)         MCF_REG08(0xFC0480E4+((x)*0x4000))
+#define MCF_INTC_L2IACK(x)         MCF_REG08(0xFC0480E8+((x)*0x4000))
+#define MCF_INTC_L3IACK(x)         MCF_REG08(0xFC0480EC+((x)*0x4000))
+#define MCF_INTC_L4IACK(x)         MCF_REG08(0xFC0480F0+((x)*0x4000))
+#define MCF_INTC_L5IACK(x)         MCF_REG08(0xFC0480F4+((x)*0x4000))
+#define MCF_INTC_L6IACK(x)         MCF_REG08(0xFC0480F8+((x)*0x4000))
+#define MCF_INTC_L7IACK(x)         MCF_REG08(0xFC0480FC+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_INTC_IPRH */
+#define MCF_INTC_IPRH_INT32        (0x00000001)
+#define MCF_INTC_IPRH_INT33        (0x00000002)
+#define MCF_INTC_IPRH_INT34        (0x00000004)
+#define MCF_INTC_IPRH_INT35        (0x00000008)
+#define MCF_INTC_IPRH_INT36        (0x00000010)
+#define MCF_INTC_IPRH_INT37        (0x00000020)
+#define MCF_INTC_IPRH_INT38        (0x00000040)
+#define MCF_INTC_IPRH_INT39        (0x00000080)
+#define MCF_INTC_IPRH_INT40        (0x00000100)
+#define MCF_INTC_IPRH_INT41        (0x00000200)
+#define MCF_INTC_IPRH_INT42        (0x00000400)
+#define MCF_INTC_IPRH_INT43        (0x00000800)
+#define MCF_INTC_IPRH_INT44        (0x00001000)
+#define MCF_INTC_IPRH_INT45        (0x00002000)
+#define MCF_INTC_IPRH_INT46        (0x00004000)
+#define MCF_INTC_IPRH_INT47        (0x00008000)
+#define MCF_INTC_IPRH_INT48        (0x00010000)
+#define MCF_INTC_IPRH_INT49        (0x00020000)
+#define MCF_INTC_IPRH_INT50        (0x00040000)
+#define MCF_INTC_IPRH_INT51        (0x00080000)
+#define MCF_INTC_IPRH_INT52        (0x00100000)
+#define MCF_INTC_IPRH_INT53        (0x00200000)
+#define MCF_INTC_IPRH_INT54        (0x00400000)
+#define MCF_INTC_IPRH_INT55        (0x00800000)
+#define MCF_INTC_IPRH_INT56        (0x01000000)
+#define MCF_INTC_IPRH_INT57        (0x02000000)
+#define MCF_INTC_IPRH_INT58        (0x04000000)
+#define MCF_INTC_IPRH_INT59        (0x08000000)
+#define MCF_INTC_IPRH_INT60        (0x10000000)
+#define MCF_INTC_IPRH_INT61        (0x20000000)
+#define MCF_INTC_IPRH_INT62        (0x40000000)
+#define MCF_INTC_IPRH_INT63        (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IPRL */
+#define MCF_INTC_IPRL_INT0         (0x00000001)
+#define MCF_INTC_IPRL_INT1         (0x00000002)
+#define MCF_INTC_IPRL_INT2         (0x00000004)
+#define MCF_INTC_IPRL_INT3         (0x00000008)
+#define MCF_INTC_IPRL_INT4         (0x00000010)
+#define MCF_INTC_IPRL_INT5         (0x00000020)
+#define MCF_INTC_IPRL_INT6         (0x00000040)
+#define MCF_INTC_IPRL_INT7         (0x00000080)
+#define MCF_INTC_IPRL_INT8         (0x00000100)
+#define MCF_INTC_IPRL_INT9         (0x00000200)
+#define MCF_INTC_IPRL_INT10        (0x00000400)
+#define MCF_INTC_IPRL_INT11        (0x00000800)
+#define MCF_INTC_IPRL_INT12        (0x00001000)
+#define MCF_INTC_IPRL_INT13        (0x00002000)
+#define MCF_INTC_IPRL_INT14        (0x00004000)
+#define MCF_INTC_IPRL_INT15        (0x00008000)
+#define MCF_INTC_IPRL_INT16        (0x00010000)
+#define MCF_INTC_IPRL_INT17        (0x00020000)
+#define MCF_INTC_IPRL_INT18        (0x00040000)
+#define MCF_INTC_IPRL_INT19        (0x00080000)
+#define MCF_INTC_IPRL_INT20        (0x00100000)
+#define MCF_INTC_IPRL_INT21        (0x00200000)
+#define MCF_INTC_IPRL_INT22        (0x00400000)
+#define MCF_INTC_IPRL_INT23        (0x00800000)
+#define MCF_INTC_IPRL_INT24        (0x01000000)
+#define MCF_INTC_IPRL_INT25        (0x02000000)
+#define MCF_INTC_IPRL_INT26        (0x04000000)
+#define MCF_INTC_IPRL_INT27        (0x08000000)
+#define MCF_INTC_IPRL_INT28        (0x10000000)
+#define MCF_INTC_IPRL_INT29        (0x20000000)
+#define MCF_INTC_IPRL_INT30        (0x40000000)
+#define MCF_INTC_IPRL_INT31        (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRH */
+#define MCF_INTC_IMRH_INT_MASK32   (0x00000001)
+#define MCF_INTC_IMRH_INT_MASK33   (0x00000002)
+#define MCF_INTC_IMRH_INT_MASK34   (0x00000004)
+#define MCF_INTC_IMRH_INT_MASK35   (0x00000008)
+#define MCF_INTC_IMRH_INT_MASK36   (0x00000010)
+#define MCF_INTC_IMRH_INT_MASK37   (0x00000020)
+#define MCF_INTC_IMRH_INT_MASK38   (0x00000040)
+#define MCF_INTC_IMRH_INT_MASK39   (0x00000080)
+#define MCF_INTC_IMRH_INT_MASK40   (0x00000100)
+#define MCF_INTC_IMRH_INT_MASK41   (0x00000200)
+#define MCF_INTC_IMRH_INT_MASK42   (0x00000400)
+#define MCF_INTC_IMRH_INT_MASK43   (0x00000800)
+#define MCF_INTC_IMRH_INT_MASK44   (0x00001000)
+#define MCF_INTC_IMRH_INT_MASK45   (0x00002000)
+#define MCF_INTC_IMRH_INT_MASK46   (0x00004000)
+#define MCF_INTC_IMRH_INT_MASK47   (0x00008000)
+#define MCF_INTC_IMRH_INT_MASK48   (0x00010000)
+#define MCF_INTC_IMRH_INT_MASK49   (0x00020000)
+#define MCF_INTC_IMRH_INT_MASK50   (0x00040000)
+#define MCF_INTC_IMRH_INT_MASK51   (0x00080000)
+#define MCF_INTC_IMRH_INT_MASK52   (0x00100000)
+#define MCF_INTC_IMRH_INT_MASK53   (0x00200000)
+#define MCF_INTC_IMRH_INT_MASK54   (0x00400000)
+#define MCF_INTC_IMRH_INT_MASK55   (0x00800000)
+#define MCF_INTC_IMRH_INT_MASK56   (0x01000000)
+#define MCF_INTC_IMRH_INT_MASK57   (0x02000000)
+#define MCF_INTC_IMRH_INT_MASK58   (0x04000000)
+#define MCF_INTC_IMRH_INT_MASK59   (0x08000000)
+#define MCF_INTC_IMRH_INT_MASK60   (0x10000000)
+#define MCF_INTC_IMRH_INT_MASK61   (0x20000000)
+#define MCF_INTC_IMRH_INT_MASK62   (0x40000000)
+#define MCF_INTC_IMRH_INT_MASK63   (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRL */
+#define MCF_INTC_IMRL_INT_MASK0    (0x00000001)
+#define MCF_INTC_IMRL_INT_MASK1    (0x00000002)
+#define MCF_INTC_IMRL_INT_MASK2    (0x00000004)
+#define MCF_INTC_IMRL_INT_MASK3    (0x00000008)
+#define MCF_INTC_IMRL_INT_MASK4    (0x00000010)
+#define MCF_INTC_IMRL_INT_MASK5    (0x00000020)
+#define MCF_INTC_IMRL_INT_MASK6    (0x00000040)
+#define MCF_INTC_IMRL_INT_MASK7    (0x00000080)
+#define MCF_INTC_IMRL_INT_MASK8    (0x00000100)
+#define MCF_INTC_IMRL_INT_MASK9    (0x00000200)
+#define MCF_INTC_IMRL_INT_MASK10   (0x00000400)
+#define MCF_INTC_IMRL_INT_MASK11   (0x00000800)
+#define MCF_INTC_IMRL_INT_MASK12   (0x00001000)
+#define MCF_INTC_IMRL_INT_MASK13   (0x00002000)
+#define MCF_INTC_IMRL_INT_MASK14   (0x00004000)
+#define MCF_INTC_IMRL_INT_MASK15   (0x00008000)
+#define MCF_INTC_IMRL_INT_MASK16   (0x00010000)
+#define MCF_INTC_IMRL_INT_MASK17   (0x00020000)
+#define MCF_INTC_IMRL_INT_MASK18   (0x00040000)
+#define MCF_INTC_IMRL_INT_MASK19   (0x00080000)
+#define MCF_INTC_IMRL_INT_MASK20   (0x00100000)
+#define MCF_INTC_IMRL_INT_MASK21   (0x00200000)
+#define MCF_INTC_IMRL_INT_MASK22   (0x00400000)
+#define MCF_INTC_IMRL_INT_MASK23   (0x00800000)
+#define MCF_INTC_IMRL_INT_MASK24   (0x01000000)
+#define MCF_INTC_IMRL_INT_MASK25   (0x02000000)
+#define MCF_INTC_IMRL_INT_MASK26   (0x04000000)
+#define MCF_INTC_IMRL_INT_MASK27   (0x08000000)
+#define MCF_INTC_IMRL_INT_MASK28   (0x10000000)
+#define MCF_INTC_IMRL_INT_MASK29   (0x20000000)
+#define MCF_INTC_IMRL_INT_MASK30   (0x40000000)
+#define MCF_INTC_IMRL_INT_MASK31   (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCH */
+#define MCF_INTC_INTFRCH_INTFRC32  (0x00000001)
+#define MCF_INTC_INTFRCH_INTFRC33  (0x00000002)
+#define MCF_INTC_INTFRCH_INTFRC34  (0x00000004)
+#define MCF_INTC_INTFRCH_INTFRC35  (0x00000008)
+#define MCF_INTC_INTFRCH_INTFRC36  (0x00000010)
+#define MCF_INTC_INTFRCH_INTFRC37  (0x00000020)
+#define MCF_INTC_INTFRCH_INTFRC38  (0x00000040)
+#define MCF_INTC_INTFRCH_INTFRC39  (0x00000080)
+#define MCF_INTC_INTFRCH_INTFRC40  (0x00000100)
+#define MCF_INTC_INTFRCH_INTFRC41  (0x00000200)
+#define MCF_INTC_INTFRCH_INTFRC42  (0x00000400)
+#define MCF_INTC_INTFRCH_INTFRC43  (0x00000800)
+#define MCF_INTC_INTFRCH_INTFRC44  (0x00001000)
+#define MCF_INTC_INTFRCH_INTFRC45  (0x00002000)
+#define MCF_INTC_INTFRCH_INTFRC46  (0x00004000)
+#define MCF_INTC_INTFRCH_INTFRC47  (0x00008000)
+#define MCF_INTC_INTFRCH_INTFRC48  (0x00010000)
+#define MCF_INTC_INTFRCH_INTFRC49  (0x00020000)
+#define MCF_INTC_INTFRCH_INTFRC50  (0x00040000)
+#define MCF_INTC_INTFRCH_INTFRC51  (0x00080000)
+#define MCF_INTC_INTFRCH_INTFRC52  (0x00100000)
+#define MCF_INTC_INTFRCH_INTFRC53  (0x00200000)
+#define MCF_INTC_INTFRCH_INTFRC54  (0x00400000)
+#define MCF_INTC_INTFRCH_INTFRC55  (0x00800000)
+#define MCF_INTC_INTFRCH_INTFRC56  (0x01000000)
+#define MCF_INTC_INTFRCH_INTFRC57  (0x02000000)
+#define MCF_INTC_INTFRCH_INTFRC58  (0x04000000)
+#define MCF_INTC_INTFRCH_INTFRC59  (0x08000000)
+#define MCF_INTC_INTFRCH_INTFRC60  (0x10000000)
+#define MCF_INTC_INTFRCH_INTFRC61  (0x20000000)
+#define MCF_INTC_INTFRCH_INTFRC62  (0x40000000)
+#define MCF_INTC_INTFRCH_INTFRC63  (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCL */
+#define MCF_INTC_INTFRCL_INTFRC0   (0x00000001)
+#define MCF_INTC_INTFRCL_INTFRC1   (0x00000002)
+#define MCF_INTC_INTFRCL_INTFRC2   (0x00000004)
+#define MCF_INTC_INTFRCL_INTFRC3   (0x00000008)
+#define MCF_INTC_INTFRCL_INTFRC4   (0x00000010)
+#define MCF_INTC_INTFRCL_INTFRC5   (0x00000020)
+#define MCF_INTC_INTFRCL_INTFRC6   (0x00000040)
+#define MCF_INTC_INTFRCL_INTFRC7   (0x00000080)
+#define MCF_INTC_INTFRCL_INTFRC8   (0x00000100)
+#define MCF_INTC_INTFRCL_INTFRC9   (0x00000200)
+#define MCF_INTC_INTFRCL_INTFRC10  (0x00000400)
+#define MCF_INTC_INTFRCL_INTFRC11  (0x00000800)
+#define MCF_INTC_INTFRCL_INTFRC12  (0x00001000)
+#define MCF_INTC_INTFRCL_INTFRC13  (0x00002000)
+#define MCF_INTC_INTFRCL_INTFRC14  (0x00004000)
+#define MCF_INTC_INTFRCL_INTFRC15  (0x00008000)
+#define MCF_INTC_INTFRCL_INTFRC16  (0x00010000)
+#define MCF_INTC_INTFRCL_INTFRC17  (0x00020000)
+#define MCF_INTC_INTFRCL_INTFRC18  (0x00040000)
+#define MCF_INTC_INTFRCL_INTFRC19  (0x00080000)
+#define MCF_INTC_INTFRCL_INTFRC20  (0x00100000)
+#define MCF_INTC_INTFRCL_INTFRC21  (0x00200000)
+#define MCF_INTC_INTFRCL_INTFRC22  (0x00400000)
+#define MCF_INTC_INTFRCL_INTFRC23  (0x00800000)
+#define MCF_INTC_INTFRCL_INTFRC24  (0x01000000)
+#define MCF_INTC_INTFRCL_INTFRC25  (0x02000000)
+#define MCF_INTC_INTFRCL_INTFRC26  (0x04000000)
+#define MCF_INTC_INTFRCL_INTFRC27  (0x08000000)
+#define MCF_INTC_INTFRCL_INTFRC28  (0x10000000)
+#define MCF_INTC_INTFRCL_INTFRC29  (0x20000000)
+#define MCF_INTC_INTFRCL_INTFRC30  (0x40000000)
+#define MCF_INTC_INTFRCL_INTFRC31  (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_ICONFIG */
+#define MCF_INTC_ICONFIG_EMASK     (0x0020)
+#define MCF_INTC_ICONFIG_ELVLPRI1  (0x0200)
+#define MCF_INTC_ICONFIG_ELVLPRI2  (0x0400)
+#define MCF_INTC_ICONFIG_ELVLPRI3  (0x0800)
+#define MCF_INTC_ICONFIG_ELVLPRI4  (0x1000)
+#define MCF_INTC_ICONFIG_ELVLPRI5  (0x2000)
+#define MCF_INTC_ICONFIG_ELVLPRI6  (0x4000)
+#define MCF_INTC_ICONFIG_ELVLPRI7  (0x8000)
+
+/* Bit definitions and macros for MCF_INTC_SIMR */
+#define MCF_INTC_SIMR_SIMR(x)      (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CIMR */
+#define MCF_INTC_CIMR_CIMR(x)      (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CLMASK */
+#define MCF_INTC_CLMASK_CLMASK(x)  (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SLMASK */
+#define MCF_INTC_SLMASK_SLMASK(x)  (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_ICR */
+#define MCF_INTC_ICR_IL(x)         (((x)&0x07)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SWIACK */
+#define MCF_INTC_SWIACK_VECTOR(x)  (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_INTC_LIACK */
+#define MCF_INTC_LIACK_VECTOR(x)   (((x)&0xFF)<<0)
+
+/********************************************************************/
+/*********************************************************************
+*
+* LCD Controller (LCDC)
+*
+*********************************************************************/
+
+/* Register read/write macros */
+#define MCF_LCDC_LSSAR                  MCF_REG32(0xFC0AC000)
+#define MCF_LCDC_LSR                    MCF_REG32(0xFC0AC004)
+#define MCF_LCDC_LVPWR                  MCF_REG32(0xFC0AC008)
+#define MCF_LCDC_LCPR                   MCF_REG32(0xFC0AC00C)
+#define MCF_LCDC_LCWHBR                 MCF_REG32(0xFC0AC010)
+#define MCF_LCDC_LCCMR                  MCF_REG32(0xFC0AC014)
+#define MCF_LCDC_LPCR                   MCF_REG32(0xFC0AC018)
+#define MCF_LCDC_LHCR                   MCF_REG32(0xFC0AC01C)
+#define MCF_LCDC_LVCR                   MCF_REG32(0xFC0AC020)
+#define MCF_LCDC_LPOR                   MCF_REG32(0xFC0AC024)
+#define MCF_LCDC_LSCR                   MCF_REG32(0xFC0AC028)
+#define MCF_LCDC_LPCCR                  MCF_REG32(0xFC0AC02C)
+#define MCF_LCDC_LDCR                   MCF_REG32(0xFC0AC030)
+#define MCF_LCDC_LRMCR                  MCF_REG32(0xFC0AC034)
+#define MCF_LCDC_LICR                   MCF_REG32(0xFC0AC038)
+#define MCF_LCDC_LIER                   MCF_REG32(0xFC0AC03C)
+#define MCF_LCDC_LISR                   MCF_REG32(0xFC0AC040)
+#define MCF_LCDC_LGWSAR                 MCF_REG32(0xFC0AC050)
+#define MCF_LCDC_LGWSR                  MCF_REG32(0xFC0AC054)
+#define MCF_LCDC_LGWVPWR                MCF_REG32(0xFC0AC058)
+#define MCF_LCDC_LGWPOR                 MCF_REG32(0xFC0AC05C)
+#define MCF_LCDC_LGWPR                  MCF_REG32(0xFC0AC060)
+#define MCF_LCDC_LGWCR                  MCF_REG32(0xFC0AC064)
+#define MCF_LCDC_LGWDCR                 MCF_REG32(0xFC0AC068)
+#define MCF_LCDC_BPLUT_BASE             MCF_REG32(0xFC0AC800)
+#define MCF_LCDC_GWLUT_BASE             MCF_REG32(0xFC0ACC00)
+
+/* Bit definitions and macros for MCF_LCDC_LSSAR */
+#define MCF_LCDC_LSSAR_SSA(x)           (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LSR */
+#define MCF_LCDC_LSR_YMAX(x)            (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LSR_XMAX(x)            (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LVPWR */
+#define MCF_LCDC_LVPWR_VPW(x)           (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LCPR */
+#define MCF_LCDC_LCPR_CYP(x)            (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LCPR_CXP(x)            (((x)&0x000003FF)<<16)
+#define MCF_LCDC_LCPR_OP                (0x10000000)
+#define MCF_LCDC_LCPR_CC(x)             (((x)&0x00000003)<<30)
+#define MCF_LCDC_LCPR_CC_TRANSPARENT    (0x00000000)
+#define MCF_LCDC_LCPR_CC_OR             (0x40000000)
+#define MCF_LCDC_LCPR_CC_XOR            (0x80000000)
+#define MCF_LCDC_LCPR_CC_AND            (0xC0000000)
+#define MCF_LCDC_LCPR_OP_ON             (0x10000000)
+#define MCF_LCDC_LCPR_OP_OFF            (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCWHBR */
+#define MCF_LCDC_LCWHBR_BD(x)           (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LCWHBR_CH(x)           (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LCWHBR_CW(x)           (((x)&0x0000001F)<<24)
+#define MCF_LCDC_LCWHBR_BK_EN           (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_ON        (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_OFF       (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCCMR */
+#define MCF_LCDC_LCCMR_CUR_COL_B(x)     (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LCCMR_CUR_COL_G(x)     (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LCCMR_CUR_COL_R(x)     (((x)&0x0000003F)<<12)
+
+/* Bit definitions and macros for MCF_LCDC_LPCR */
+#define MCF_LCDC_LPCR_PCD(x)            (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LPCR_SHARP             (0x00000040)
+#define MCF_LCDC_LPCR_SCLKSEL           (0x00000080)
+#define MCF_LCDC_LPCR_ACD(x)            (((x)&0x0000007F)<<8)
+#define MCF_LCDC_LPCR_ACDSEL            (0x00008000)
+#define MCF_LCDC_LPCR_REV_VS            (0x00010000)
+#define MCF_LCDC_LPCR_SWAP_SEL          (0x00020000)
+#define MCF_LCDC_LPCR_ENDSEL            (0x00040000)
+#define MCF_LCDC_LPCR_SCLKIDLE          (0x00080000)
+#define MCF_LCDC_LPCR_OEPOL             (0x00100000)
+#define MCF_LCDC_LPCR_CLKPOL            (0x00200000)
+#define MCF_LCDC_LPCR_LPPOL             (0x00400000)
+#define MCF_LCDC_LPCR_FLM               (0x00800000)
+#define MCF_LCDC_LPCR_PIXPOL            (0x01000000)
+#define MCF_LCDC_LPCR_BPIX(x)           (((x)&0x00000007)<<25)
+#define MCF_LCDC_LPCR_PBSIZ(x)          (((x)&0x00000003)<<28)
+#define MCF_LCDC_LPCR_COLOR             (0x40000000)
+#define MCF_LCDC_LPCR_TFT               (0x80000000)
+#define MCF_LCDC_LPCR_MODE_MONOCGROME   (0x00000000)
+#define MCF_LCDC_LPCR_MODE_CSTN         (0x40000000)
+#define MCF_LCDC_LPCR_MODE_TFT          (0xC0000000)
+#define MCF_LCDC_LPCR_PBSIZ_1           (0x00000000)
+#define MCF_LCDC_LPCR_PBSIZ_2           (0x10000000)
+#define MCF_LCDC_LPCR_PBSIZ_4           (0x20000000)
+#define MCF_LCDC_LPCR_PBSIZ_8           (0x30000000)
+#define MCF_LCDC_LPCR_BPIX_1bpp         (0x00000000)
+#define MCF_LCDC_LPCR_BPIX_2bpp         (0x02000000)
+#define MCF_LCDC_LPCR_BPIX_4bpp         (0x04000000)
+#define MCF_LCDC_LPCR_BPIX_8bpp         (0x06000000)
+#define MCF_LCDC_LPCR_BPIX_12bpp        (0x08000000)
+#define MCF_LCDC_LPCR_BPIX_16bpp        (0x0A000000)
+#define MCF_LCDC_LPCR_BPIX_18bpp        (0x0C000000)
+
+#define MCF_LCDC_LPCR_PANEL_TYPE(x)     (((x)&0x00000003)<<30) 
+
+/* Bit definitions and macros for MCF_LCDC_LHCR */
+#define MCF_LCDC_LHCR_H_WAIT_2(x)       (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LHCR_H_WAIT_1(x)       (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LHCR_H_WIDTH(x)        (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LVCR */
+#define MCF_LCDC_LVCR_V_WAIT_2(x)       (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LVCR_V_WAIT_1(x)       (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LVCR_V_WIDTH(x)      (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LPOR */
+#define MCF_LCDC_LPOR_POS(x)            (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LPCCR */
+#define MCF_LCDC_LPCCR_PW(x)            (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LPCCR_CC_EN            (0x00000100)
+#define MCF_LCDC_LPCCR_SCR(x)           (((x)&0x00000003)<<9)
+#define MCF_LCDC_LPCCR_LDMSK            (0x00008000)
+#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x)  (((x)&0x000001FF)<<16)
+#define MCF_LCDC_LPCCR_SCR_LINEPULSE    (0x00000000)
+#define MCF_LCDC_LPCCR_SCR_PIXELCLK     (0x00002000)
+#define MCF_LCDC_LPCCR_SCR_LCDCLOCK     (0x00004000)
+
+/* Bit definitions and macros for MCF_LCDC_LDCR */
+#define MCF_LCDC_LDCR_TM(x)             (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LDCR_HM(x)             (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LDCR_BURST             (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LRMCR */
+#define MCF_LCDC_LRMCR_SEL_REF          (0x00000001)
+
+/* Bit definitions and macros for MCF_LCDC_LICR */
+#define MCF_LCDC_LICR_INTCON            (0x00000001)
+#define MCF_LCDC_LICR_INTSYN            (0x00000004)
+#define MCF_LCDC_LICR_GW_INT_CON        (0x00000010)
+
+/* Bit definitions and macros for MCF_LCDC_LIER */
+#define MCF_LCDC_LIER_BOF_EN            (0x00000001)
+#define MCF_LCDC_LIER_EOF_EN            (0x00000002)
+#define MCF_LCDC_LIER_ERR_RES_EN        (0x00000004)
+#define MCF_LCDC_LIER_UDR_ERR_EN        (0x00000008)
+#define MCF_LCDC_LIER_GW_BOF_EN         (0x00000010)
+#define MCF_LCDC_LIER_GW_EOF_EN         (0x00000020)
+#define MCF_LCDC_LIER_GW_ERR_RES_EN     (0x00000040)
+#define MCF_LCDC_LIER_GW_UDR_ERR_EN     (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LISR */
+#define MCF_LCDC_LISR_BOF               (0x00000001)
+#define MCF_LCDC_LISR_EOF               (0x00000002)
+#define MCF_LCDC_LISR_ERR_RES           (0x00000004)
+#define MCF_LCDC_LISR_UDR_ERR           (0x00000008)
+#define MCF_LCDC_LISR_GW_BOF            (0x00000010)
+#define MCF_LCDC_LISR_GW_EOF            (0x00000020)
+#define MCF_LCDC_LISR_GW_ERR_RES        (0x00000040)
+#define MCF_LCDC_LISR_GW_UDR_ERR        (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSAR */
+#define MCF_LCDC_LGWSAR_GWSA(x)         (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSR */
+#define MCF_LCDC_LGWSR_GWH(x)           (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWSR_GWW(x)           (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
+#define MCF_LCDC_LGWVPWR_GWVPW(x)       (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPOR */
+#define MCF_LCDC_LGWPOR_GWPO(x)         (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPR */
+#define MCF_LCDC_LGWPR_GWYP(x)          (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWPR_GWXP(x)          (((x)&0x000003FF)<<16)
+
+/* Bit definitions and macros for MCF_LCDC_LGWCR */
+#define MCF_LCDC_LGWCR_GWCKB(x)         (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LGWCR_GWCKG(x)         (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LGWCR_GWCKR(x)         (((x)&0x0000003F)<<12)
+#define MCF_LCDC_LGWCR_GW_RVS           (0x00200000)
+#define MCF_LCDC_LGWCR_GWE              (0x00400000)
+#define MCF_LCDC_LGWCR_GWCKE            (0x00800000)
+#define MCF_LCDC_LGWCR_GWAV(x)          (((x)&0x000000FF)<<24)
+
+/* Bit definitions and macros for MCF_LCDC_LGWDCR */
+#define MCF_LCDC_LGWDCR_GWTM(x)         (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LGWDCR_GWHM(x)         (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LGWDCR_GWBT            (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LSCR */
+#define MCF_LCDC_LSCR_PS_RISE_DELAY(x)    (((x)&0x0000003F)<<26)
+#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x)   (((x)&0x000000FF)<<16)
+#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
+#define MCF_LCDC_LSCR_GRAY_2(x)  		  (((x)&0x0000000F)<<4)
+#define MCF_LCDC_LSCR_GRAY_1(x)  		  (((x)&0x0000000F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
+#define MCF_LCDC_BPLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
+#define MCF_LCDC_GWLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * Phase Locked Loop (PLL)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_PLL_PODR              MCF_REG08(0xFC0C0000)
+#define MCF_PLL_PLLCR             MCF_REG08(0xFC0C0004)
+#define MCF_PLL_PMDR              MCF_REG08(0xFC0C0008)
+#define MCF_PLL_PFDR              MCF_REG08(0xFC0C000C)
+
+/* Bit definitions and macros for MCF_PLL_PODR */
+#define MCF_PLL_PODR_BUSDIV(x)    (((x)&0x0F)<<0)
+#define MCF_PLL_PODR_CPUDIV(x)    (((x)&0x0F)<<4)
+
+/* Bit definitions and macros for MCF_PLL_PLLCR */
+#define MCF_PLL_PLLCR_DITHDEV(x)  (((x)&0x07)<<0)
+#define MCF_PLL_PLLCR_DITHEN      (0x80)
+
+/* Bit definitions and macros for MCF_PLL_PMDR */
+#define MCF_PLL_PMDR_MODDIV(x)    (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_PLL_PFDR */
+#define MCF_PLL_PFDR_MFD(x)       (((x)&0xFF)<<0)
+
+/*********************************************************************
+ *
+ * System Control Module Registers (SCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SCM_MPR			MCF_REG32(0xFC000000)
+#define MCF_SCM_PACRA			MCF_REG32(0xFC000020)
+#define MCF_SCM_PACRB			MCF_REG32(0xFC000024)
+#define MCF_SCM_PACRC			MCF_REG32(0xFC000028)
+#define MCF_SCM_PACRD			MCF_REG32(0xFC00002C)
+#define MCF_SCM_PACRE			MCF_REG32(0xFC000040)
+#define MCF_SCM_PACRF			MCF_REG32(0xFC000044)
+
+#define MCF_SCM_BCR			MCF_REG32(0xFC040024)
+
+/*********************************************************************
+ *
+ * SDRAM Controller (SDRAMC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SDRAMC_SDMR			MCF_REG32(0xFC0B8000)
+#define MCF_SDRAMC_SDCR			MCF_REG32(0xFC0B8004)
+#define MCF_SDRAMC_SDCFG1		MCF_REG32(0xFC0B8008)
+#define MCF_SDRAMC_SDCFG2		MCF_REG32(0xFC0B800C)
+#define MCF_SDRAMC_LIMP_FIX		MCF_REG32(0xFC0B8080)
+#define MCF_SDRAMC_SDDS			MCF_REG32(0xFC0B8100)
+#define MCF_SDRAMC_SDCS0		MCF_REG32(0xFC0B8110)
+#define MCF_SDRAMC_SDCS1		MCF_REG32(0xFC0B8114)
+#define MCF_SDRAMC_SDCS2		MCF_REG32(0xFC0B8118)
+#define MCF_SDRAMC_SDCS3		MCF_REG32(0xFC0B811C)
+#define MCF_SDRAMC_SDCS(x)		MCF_REG32(0xFC0B8110+((x)*0x004))
+
+/* Bit definitions and macros for MCF_SDRAMC_SDMR */
+#define MCF_SDRAMC_SDMR_CMD		(0x00010000)
+#define MCF_SDRAMC_SDMR_AD(x)		(((x)&0x00000FFF)<<18)
+#define MCF_SDRAMC_SDMR_BNKAD(x)	(((x)&0x00000003)<<30)
+#define MCF_SDRAMC_SDMR_BNKAD_LMR	(0x00000000)
+#define MCF_SDRAMC_SDMR_BNKAD_LEMR	(0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCR */
+#define MCF_SDRAMC_SDCR_IPALL		(0x00000002)
+#define MCF_SDRAMC_SDCR_IREF		(0x00000004)
+#define MCF_SDRAMC_SDCR_DQS_OE(x)	(((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCR_PS(x)		(((x)&0x00000003)<<12)
+#define MCF_SDRAMC_SDCR_RCNT(x)		(((x)&0x0000003F)<<16)
+#define MCF_SDRAMC_SDCR_OE_RULE		(0x00400000)
+#define MCF_SDRAMC_SDCR_MUX(x)		(((x)&0x00000003)<<24)
+#define MCF_SDRAMC_SDCR_REF		(0x10000000)
+#define MCF_SDRAMC_SDCR_DDR		(0x20000000)
+#define MCF_SDRAMC_SDCR_CKE		(0x40000000)
+#define MCF_SDRAMC_SDCR_MODE_EN		(0x80000000)
+#define MCF_SDRAMC_SDCR_PS_16		(0x00002000)
+#define MCF_SDRAMC_SDCR_PS_32		(0x00000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
+#define MCF_SDRAMC_SDCFG1_WTLAT(x)	(((x)&0x00000007)<<4)
+#define MCF_SDRAMC_SDCFG1_REF2ACT(x)	(((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x)	(((x)&0x00000007)<<12)
+#define MCF_SDRAMC_SDCFG1_ACT2RW(x)	(((x)&0x00000007)<<16)
+#define MCF_SDRAMC_SDCFG1_RDLAT(x)	(((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG1_SWT2RD(x)	(((x)&0x00000007)<<24)
+#define MCF_SDRAMC_SDCFG1_SRD2RW(x)	(((x)&0x0000000F)<<28)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
+#define MCF_SDRAMC_SDCFG2_BL(x)		(((x)&0x0000000F)<<16)
+#define MCF_SDRAMC_SDCFG2_BRD2WT(x)	(((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG2_BWT2RW(x)	(((x)&0x0000000F)<<24)
+#define MCF_SDRAMC_SDCFG2_BRD2PRE(x)	(((x)&0x0000000F)<<28)
+
+/* Device Errata - LIMP mode work around */
+#define MCF_SDRAMC_REFRESH		(0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDDS */
+#define MCF_SDRAMC_SDDS_SB_D(x)		(((x)&0x00000003)<<0)
+#define MCF_SDRAMC_SDDS_SB_S(x)		(((x)&0x00000003)<<2)
+#define MCF_SDRAMC_SDDS_SB_A(x)		(((x)&0x00000003)<<4)
+#define MCF_SDRAMC_SDDS_SB_C(x)		(((x)&0x00000003)<<6)
+#define MCF_SDRAMC_SDDS_SB_E(x)		(((x)&0x00000003)<<8)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCS */
+#define MCF_SDRAMC_SDCS_CSSZ(x)		(((x)&0x0000001F)<<0)
+#define MCF_SDRAMC_SDCS_BASE(x)		(((x)&0x00000FFF)<<20)
+#define MCF_SDRAMC_SDCS_BA(x)		((x)&0xFFF00000)
+#define MCF_SDRAMC_SDCS_CSSZ_DIABLE	(0x00000000)
+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE	(0x00000013)
+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE	(0x00000014)
+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE	(0x00000015)
+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE	(0x00000016)
+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE	(0x00000017)
+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE	(0x00000018)
+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE	(0x00000019)
+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE	(0x0000001A)
+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE	(0x0000001B)
+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE	(0x0000001C)
+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE	(0x0000001D)
+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE	(0x0000001E)
+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE	(0x0000001F)
+
+/*********************************************************************
+ *
+ *      FlexCAN module registers
+ *
+ *********************************************************************/
+#define MCF_FLEXCAN_BASEADDR(x)		(0xFC020000+(x)*0x0800)
+#define MCF_FLEXCAN_CANMCR(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x00)
+#define MCF_FLEXCAN_CANCTRL(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x04)
+#define MCF_FLEXCAN_TIMER(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x08)
+#define MCF_FLEXCAN_RXGMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x10)
+#define MCF_FLEXCAN_RX14MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x14)
+#define MCF_FLEXCAN_RX15MASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x18)
+#define MCF_FLEXCAN_ERRCNT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
+#define MCF_FLEXCAN_ERRSTAT(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x20)
+#define MCF_FLEXCAN_IMASK(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x28)
+#define MCF_FLEXCAN_IFLAG(x)		MCF_REG32(0xFC020000+(x)*0x0800+0x30)
+
+#define MCF_FLEXCAN_MB_CNT(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
+#define MCF_FLEXCAN_MB_ID(x,y)		MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
+#define MCF_FLEXCAN_MB_DB(x,y,z)	MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
+
+/*
+ *      FlexCAN Module Configuration Register
+ */
+#define CANMCR_MDIS		(0x80000000)
+#define CANMCR_FRZ		(0x40000000)
+#define CANMCR_HALT		(0x10000000)
+#define CANMCR_SOFTRST		(0x02000000)
+#define CANMCR_FRZACK		(0x01000000)
+#define CANMCR_SUPV		(0x00800000)
+#define CANMCR_MAXMB(x)         ((x)&0x0F)
+
+/*
+ *      FlexCAN Control Register
+ */
+#define CANCTRL_PRESDIV(x)      (((x)&0xFF)<<24)
+#define CANCTRL_RJW(x)          (((x)&0x03)<<22)
+#define CANCTRL_PSEG1(x)        (((x)&0x07)<<19)
+#define CANCTRL_PSEG2(x)        (((x)&0x07)<<16)
+#define CANCTRL_BOFFMSK         (0x00008000)
+#define CANCTRL_ERRMSK	        (0x00004000)
+#define CANCTRL_CLKSRC		(0x00002000)
+#define CANCTRL_LPB	        (0x00001000)
+#define CANCTRL_SAMP	        (0x00000080)
+#define CANCTRL_BOFFREC         (0x00000040)
+#define CANCTRL_TSYNC           (0x00000020)
+#define CANCTRL_LBUF            (0x00000010)
+#define CANCTRL_LOM             (0x00000008)
+#define CANCTRL_PROPSEG(x)      ((x)&0x07)
+
+/*
+ *      FlexCAN Error Counter Register
+ */
+#define ERRCNT_RXECTR(x)        (((x)&0xFF)<<8)
+#define ERRCNT_TXECTR(x)        ((x)&0xFF)
+
+/*
+ *      FlexCAN Error and Status Register
+ */
+#define ERRSTAT_BITERR(x)       (((x)&0x03)<<14)
+#define ERRSTAT_ACKERR           (0x00002000)
+#define ERRSTAT_CRCERR           (0x00001000)
+#define ERRSTAT_FRMERR           (0x00000800)
+#define ERRSTAT_STFERR           (0x00000400)
+#define ERRSTAT_TXWRN            (0x00000200)
+#define ERRSTAT_RXWRN            (0x00000100)
+#define ERRSTAT_IDLE             (0x00000080)
+#define ERRSTAT_TXRX             (0x00000040)
+#define ERRSTAT_FLTCONF(x)       (((x)&0x03)<<4)
+#define ERRSTAT_BOFFINT          (0x00000004)
+#define ERRSTAT_ERRINT           (0x00000002)
+
+/*
+ *      Interrupt Mask Register
+ */
+#define IMASK_BUF15M		(0x8000)
+#define IMASK_BUF14M		(0x4000)
+#define IMASK_BUF13M		(0x2000)
+#define IMASK_BUF12M		(0x1000)
+#define IMASK_BUF11M		(0x0800)
+#define IMASK_BUF10M		(0x0400)
+#define IMASK_BUF9M		(0x0200)
+#define IMASK_BUF8M		(0x0100)
+#define IMASK_BUF7M		(0x0080)
+#define IMASK_BUF6M		(0x0040)
+#define IMASK_BUF5M		(0x0020)
+#define IMASK_BUF4M		(0x0010)
+#define IMASK_BUF3M		(0x0008)
+#define IMASK_BUF2M		(0x0004)
+#define IMASK_BUF1M		(0x0002)
+#define IMASK_BUF0M		(0x0001)
+#define IMASK_BUFnM(x)		(0x1<<(x))
+#define IMASK_BUFF_ENABLE_ALL	(0x1111)
+#define IMASK_BUFF_DISABLE_ALL	(0x0000)
+
+/*
+ *      Interrupt Flag Register
+ */
+#define IFLAG_BUF15M		(0x8000)
+#define IFLAG_BUF14M		(0x4000)
+#define IFLAG_BUF13M		(0x2000)
+#define IFLAG_BUF12M		(0x1000)
+#define IFLAG_BUF11M		(0x0800)
+#define IFLAG_BUF10M		(0x0400)
+#define IFLAG_BUF9M		(0x0200)
+#define IFLAG_BUF8M		(0x0100)
+#define IFLAG_BUF7M		(0x0080)
+#define IFLAG_BUF6M		(0x0040)
+#define IFLAG_BUF5M		(0x0020)
+#define IFLAG_BUF4M		(0x0010)
+#define IFLAG_BUF3M		(0x0008)
+#define IFLAG_BUF2M		(0x0004)
+#define IFLAG_BUF1M		(0x0002)
+#define IFLAG_BUF0M		(0x0001)
+#define IFLAG_BUFF_SET_ALL	(0xFFFF)
+#define IFLAG_BUFF_CLEAR_ALL	(0x0000)
+#define IFLAG_BUFnM(x)		(0x1<<(x))
+
+/*
+ *      Message Buffers
+ */
+#define MB_CNT_CODE(x)		(((x)&0x0F)<<24)
+#define MB_CNT_SRR		(0x00400000)
+#define MB_CNT_IDE		(0x00200000)
+#define MB_CNT_RTR		(0x00100000)
+#define MB_CNT_LENGTH(x)	(((x)&0x0F)<<16)
+#define MB_CNT_TIMESTAMP(x)	((x)&0xFFFF)
+#define MB_ID_STD(x)		(((x)&0x07FF)<<18)
+#define MB_ID_EXT(x)		((x)&0x3FFFF)
+
+/*********************************************************************
+ *
+ * Edge Port Module (EPORT)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_EPORT_EPPAR                MCF_REG16(0xFC094000)
+#define MCF_EPORT_EPDDR                MCF_REG08(0xFC094002)
+#define MCF_EPORT_EPIER                MCF_REG08(0xFC094003)
+#define MCF_EPORT_EPDR                 MCF_REG08(0xFC094004)
+#define MCF_EPORT_EPPDR                MCF_REG08(0xFC094005)
+#define MCF_EPORT_EPFR                 MCF_REG08(0xFC094006)
+
+/* Bit definitions and macros for MCF_EPORT_EPPAR */
+#define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
+#define MCF_EPORT_EPPAR_EPPA2(x)       (((x)&0x0003)<<4)
+#define MCF_EPORT_EPPAR_EPPA3(x)       (((x)&0x0003)<<6)
+#define MCF_EPORT_EPPAR_EPPA4(x)       (((x)&0x0003)<<8)
+#define MCF_EPORT_EPPAR_EPPA5(x)       (((x)&0x0003)<<10)
+#define MCF_EPORT_EPPAR_EPPA6(x)       (((x)&0x0003)<<12)
+#define MCF_EPORT_EPPAR_EPPA7(x)       (((x)&0x0003)<<14)
+#define MCF_EPORT_EPPAR_LEVEL          (0)
+#define MCF_EPORT_EPPAR_RISING         (1)
+#define MCF_EPORT_EPPAR_FALLING        (2)
+#define MCF_EPORT_EPPAR_BOTH           (3)
+#define MCF_EPORT_EPPAR_EPPA7_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA7_RISING   (0x4000)
+#define MCF_EPORT_EPPAR_EPPA7_FALLING  (0x8000)
+#define MCF_EPORT_EPPAR_EPPA7_BOTH     (0xC000)
+#define MCF_EPORT_EPPAR_EPPA6_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA6_RISING   (0x1000)
+#define MCF_EPORT_EPPAR_EPPA6_FALLING  (0x2000)
+#define MCF_EPORT_EPPAR_EPPA6_BOTH     (0x3000)
+#define MCF_EPORT_EPPAR_EPPA5_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA5_RISING   (0x0400)
+#define MCF_EPORT_EPPAR_EPPA5_FALLING  (0x0800)
+#define MCF_EPORT_EPPAR_EPPA5_BOTH     (0x0C00)
+#define MCF_EPORT_EPPAR_EPPA4_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA4_RISING   (0x0100)
+#define MCF_EPORT_EPPAR_EPPA4_FALLING  (0x0200)
+#define MCF_EPORT_EPPAR_EPPA4_BOTH     (0x0300)
+#define MCF_EPORT_EPPAR_EPPA3_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA3_RISING   (0x0040)
+#define MCF_EPORT_EPPAR_EPPA3_FALLING  (0x0080)
+#define MCF_EPORT_EPPAR_EPPA3_BOTH     (0x00C0)
+#define MCF_EPORT_EPPAR_EPPA2_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA2_RISING   (0x0010)
+#define MCF_EPORT_EPPAR_EPPA2_FALLING  (0x0020)
+#define MCF_EPORT_EPPAR_EPPA2_BOTH     (0x0030)
+#define MCF_EPORT_EPPAR_EPPA1_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA1_RISING   (0x0004)
+#define MCF_EPORT_EPPAR_EPPA1_FALLING  (0x0008)
+#define MCF_EPORT_EPPAR_EPPA1_BOTH     (0x000C)
+
+/* Bit definitions and macros for MCF_EPORT_EPDDR */
+#define MCF_EPORT_EPDDR_EPDD1          (0x02)
+#define MCF_EPORT_EPDDR_EPDD2          (0x04)
+#define MCF_EPORT_EPDDR_EPDD3          (0x08)
+#define MCF_EPORT_EPDDR_EPDD4          (0x10)
+#define MCF_EPORT_EPDDR_EPDD5          (0x20)
+#define MCF_EPORT_EPDDR_EPDD6          (0x40)
+#define MCF_EPORT_EPDDR_EPDD7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPIER */
+#define MCF_EPORT_EPIER_EPIE1          (0x02)
+#define MCF_EPORT_EPIER_EPIE2          (0x04)
+#define MCF_EPORT_EPIER_EPIE3          (0x08)
+#define MCF_EPORT_EPIER_EPIE4          (0x10)
+#define MCF_EPORT_EPIER_EPIE5          (0x20)
+#define MCF_EPORT_EPIER_EPIE6          (0x40)
+#define MCF_EPORT_EPIER_EPIE7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPDR */
+#define MCF_EPORT_EPDR_EPD1            (0x02)
+#define MCF_EPORT_EPDR_EPD2            (0x04)
+#define MCF_EPORT_EPDR_EPD3            (0x08)
+#define MCF_EPORT_EPDR_EPD4            (0x10)
+#define MCF_EPORT_EPDR_EPD5            (0x20)
+#define MCF_EPORT_EPDR_EPD6            (0x40)
+#define MCF_EPORT_EPDR_EPD7            (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPPDR */
+#define MCF_EPORT_EPPDR_EPPD1          (0x02)
+#define MCF_EPORT_EPPDR_EPPD2          (0x04)
+#define MCF_EPORT_EPPDR_EPPD3          (0x08)
+#define MCF_EPORT_EPPDR_EPPD4          (0x10)
+#define MCF_EPORT_EPPDR_EPPD5          (0x20)
+#define MCF_EPORT_EPPDR_EPPD6          (0x40)
+#define MCF_EPORT_EPPDR_EPPD7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPFR */
+#define MCF_EPORT_EPFR_EPF1            (0x02)
+#define MCF_EPORT_EPFR_EPF2            (0x04)
+#define MCF_EPORT_EPFR_EPF3            (0x08)
+#define MCF_EPORT_EPFR_EPF4            (0x10)
+#define MCF_EPORT_EPFR_EPF5            (0x20)
+#define MCF_EPORT_EPFR_EPF6            (0x40)
+#define MCF_EPORT_EPFR_EPF7            (0x80)
+
+/********************************************************************/
+#endif	/* m532xsim_h */
diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h
new file mode 100644
index 00000000000..cc22c4a5300
--- /dev/null
+++ b/arch/m68knommu/include/asm/m5407sim.h
@@ -0,0 +1,157 @@
+/****************************************************************************/
+
+/*
+ *	m5407sim.h -- ColdFire 5407 System Integration Module support.
+ *
+ *	(C) Copyright 2000,  Lineo (www.lineo.com)
+ *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef	m5407sim_h
+#define	m5407sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5407 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR2		0x98		/* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5407.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4	0x80
+#define IRQ3_LEVEL6	0x40
+#define IRQ1_LEVEL2	0x20
+
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_DEC		0x80000000	/* Enable data cache */
+#define	CACR_DWP		0x40000000	/* Data write protection */
+#define	CACR_DESB		0x20000000	/* Enable data store buffer */
+#define	CACR_DDPI		0x10000000	/* Disable CPUSHL */
+#define	CACR_DHCLK		0x08000000	/* Half data cache lock mode */
+#define	CACR_DDCM_WT		0x00000000	/* Write through cache*/
+#define	CACR_DDCM_CP		0x02000000	/* Copyback cache */
+#define	CACR_DDCM_P		0x04000000	/* No cache, precise */
+#define	CACR_DDCM_IMP		0x06000000	/* No cache, imprecise */
+#define	CACR_DCINVA		0x01000000	/* Invalidate data cache */
+#define	CACR_BEC		0x00080000	/* Enable branch cache */
+#define	CACR_BCINVA		0x00040000	/* Invalidate branch cache */
+#define	CACR_IEC		0x00008000	/* Enable instruction cache */
+#define	CACR_DNFB		0x00002000	/* Inhibited fill buffer */
+#define	CACR_IDPI		0x00001000	/* Disable CPUSHL */
+#define	CACR_IHLCK		0x00000800	/* Intruction cache half lock */
+#define	CACR_IDCM		0x00000400	/* Intruction cache inhibit */
+#define	CACR_ICINVA		0x00000100	/* Invalidate instr cache */
+
+#define	ACR_BASE_POS		24		/* Address Base */
+#define	ACR_MASK_POS		16		/* Address Mask */
+#define	ACR_ENABLE		0x00008000	/* Enable address */
+#define	ACR_USER		0x00000000	/* User mode access only */
+#define	ACR_SUPER		0x00002000	/* Supervisor mode only */
+#define	ACR_ANY			0x00004000	/* Match any access mode */
+#define	ACR_CM_WT		0x00000000	/* Write through mode */
+#define	ACR_CM_CP		0x00000020	/* Copyback mode */
+#define	ACR_CM_OFF_PRE		0x00000040	/* No cache, precise */
+#define	ACR_CM_OFF_IMP		0x00000060	/* No cache, imprecise */
+#define	ACR_WPROTECT		0x00000004	/* Write protect */
+
+/****************************************************************************/
+#endif	/* m5407sim_h */
diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68knommu/include/asm/m68360.h
new file mode 100644
index 00000000000..eb7d39ef285
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360.h
@@ -0,0 +1,13 @@
+#include "m68360_regs.h"
+#include "m68360_pram.h"
+#include "m68360_quicc.h"
+#include "m68360_enet.h"
+
+#ifdef CONFIG_M68360
+
+#define CPM_INTERRUPT    4
+
+/* see MC68360 User's Manual, p. 7-377  */
+#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
+
+#endif /* CONFIG_M68360 */
diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h
new file mode 100644
index 00000000000..c36f4d05920
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360_enet.h
@@ -0,0 +1,177 @@
+/***********************************
+ * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions for the ETHERNET controllers
+ ***************************************
+ */
+
+#ifndef __ETHER_H
+#define __ETHER_H
+
+#include "quicc_simple.h"
+
+/*
+ * transmit BD's
+ */
+#define T_R     0x8000          /* ready bit */
+#define E_T_PAD 0x4000          /* short frame padding */
+#define T_W     0x2000          /* wrap bit */
+#define T_I     0x1000          /* interrupt on completion */
+#define T_L     0x0800          /* last in frame */
+#define T_TC    0x0400          /* transmit CRC (when last) */
+
+#define T_DEF   0x0200          /* defer indication */
+#define T_HB    0x0100          /* heartbeat */
+#define T_LC    0x0080          /* error: late collision */
+#define T_RL    0x0040          /* error: retransmission limit */
+#define T_RC    0x003c          /* retry count */
+#define T_UN    0x0002          /* error: underrun */
+#define T_CSL   0x0001          /* carier sense lost */
+#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
+
+/*
+ * receive BD's
+ */
+#define R_E     0x8000          /* buffer empty */
+#define R_W     0x2000          /* wrap bit */
+#define R_I     0x1000          /* interrupt on reception */
+#define R_L     0x0800          /* last BD in frame */
+#define R_F     0x0400          /* first BD in frame */
+#define R_M     0x0100          /* received because of promisc. mode */
+
+#define R_LG    0x0020          /* frame too long */
+#define R_NO    0x0010          /* non-octet aligned */
+#define R_SH    0x0008          /* short frame */
+#define R_CR    0x0004          /* receive CRC error */
+#define R_OV    0x0002          /* receive overrun */
+#define R_CL    0x0001          /* collision */
+#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
+
+
+/*
+ * ethernet interrupts
+ */
+#define ETHERNET_GRA    0x0080  /* graceful stop complete */
+#define ETHERNET_TXE    0x0010  /* transmit error         */
+#define ETHERNET_RXF    0x0008  /* receive frame          */
+#define ETHERNET_BSY    0x0004  /* busy condition         */
+#define ETHERNET_TXB    0x0002  /* transmit buffer        */
+#define ETHERNET_RXB    0x0001  /* receive buffer         */
+
+/*
+ * ethernet protocol specific mode register (PSMR)
+ */
+#define ETHER_HBC       0x8000    /* heartbeat checking      */
+#define ETHER_FC        0x4000    /* force collision         */
+#define ETHER_RSH       0x2000    /* receive short frames    */
+#define ETHER_IAM       0x1000    /* individual address mode */
+#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
+#define ETHER_PRO       0x0200    /* promiscuous             */
+#define ETHER_BRO       0x0100    /* broadcast address       */
+#define ETHER_SBT       0x0080    /* stop backoff timer      */
+#define ETHER_LPB       0x0040    /* Loop Back Mode          */
+#define ETHER_SIP       0x0020    /* sample input pins       */
+#define ETHER_LCW       0x0010    /* late collision window   */
+#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
+#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
+#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
+#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
+#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
+#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
+#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
+#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
+
+/*
+ * ethernet specific parameters
+ */
+#define CRC_WORD 4          /* Length in bytes of CRC */               
+#define C_PRES   0xffffffff /* preform 32 bit CRC */
+#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
+#define CRCEC    0x00000000
+#define ALEC     0x00000000
+#define DISFC    0x00000000
+#define PADS     0x00000000
+#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
+#define ETH_MFLR 0x05ee     /* 1518 max frame size */
+#define MINFLR   0x0040     /* Minimum frame size 64 */
+#define MAXD1    0x05ee     /* Max dma count 1518 */
+#define MAXD2    0x05ee
+#define GADDR1   0x00000000 /* Clear group address */  
+#define GADDR2   0x00000000
+#define GADDR3   0x00000000    
+#define GADDR4   0x00000000    
+#define P_PER    0x00000000 /*not used */              
+#define IADDR1   0x00000000 /* Individual hash table not used */       
+#define IADDR2   0x00000000
+#define IADDR3   0x00000000    
+#define IADDR4   0x00000000            
+#define TADDR_H  0x00000000 /* clear this regs */              
+#define TADDR_M  0x00000000            
+#define TADDR_L  0x00000000            
+
+/*       SCC Parameter Ram */
+#define RFCR    0x18 /* normal operation */
+#define TFCR    0x18 /* normal operation */
+#define E_MRBLR 1518 /* Max ethernet frame length */
+
+/*
+ * ethernet specific structure
+ */
+typedef union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+} ETHER_ADDR;
+
+typedef struct {
+    int        max_frame_length;
+    int        promisc_mode;
+    int        reject_broadcast;
+    ETHER_ADDR phys_adr;
+} ETHER_SPECIFIC;
+
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[1];
+} ETHER_FRAME;
+
+#define MAX_DATALEN 1500
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[MAX_DATALEN];
+    unsigned char  fcs[CRC_WORD];
+} ETHER_MAX_FRAME;
+
+
+/*
+ * Internal ethernet function prototypes
+ */
+void        ether_interrupt(int scc_num);
+/* mleslie: debug */
+/* static void ethernet_rx_internal(int scc_num); */
+/* static void ethernet_tx_internal(int scc_num); */
+
+/*
+ * User callable routines prototypes (ethernet specific)
+ */
+void ethernet_init(int                       scc_number,
+                   alloc_routine             *alloc_buffer,
+                   free_routine              *free_buffer,
+                   store_rx_buffer_routine   *store_rx_buffer,
+                   handle_tx_error_routine   *handle_tx_error,
+                   handle_rx_error_routine   *handle_rx_error,
+                   handle_lost_error_routine *handle_lost_error,
+                   ETHER_SPECIFIC            *ether_spec);
+int  ethernet_tx(int scc_number, void *buf, int length);
+
+#endif
+
diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h
new file mode 100644
index 00000000000..e6088bbce93
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360_pram.h
@@ -0,0 +1,431 @@
+/***********************************
+ * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the parameter area RAM.
+ * Note that different structures are overlaid
+ * at the same offsets for the different modes
+ * of operation.
+ ***************************************
+ */
+
+#ifndef __PRAM_H
+#define __PRAM_H
+
+/* Time slot assignment table */
+#define VALID_SLOT	0x8000
+#define WRAP_SLOT	0x4000
+
+/*****************************************************************
+        Global Multichannel parameter RAM
+*****************************************************************/
+struct global_multi_pram {
+    /*
+     * Global Multichannel parameter RAM
+     */
+    unsigned long   mcbase;		/* Multichannel Base pointer */
+    unsigned short  qmcstate;		/* Multichannel Controller state */
+    unsigned short  mrblr;		/* Maximum Receive Buffer Length */
+    unsigned short  tx_s_ptr;		/* TSTATx Pointer */
+    unsigned short  rxptr;		/* Current Time slot entry in TSATRx */
+    unsigned short  grfthr;		/* Global Receive frame threshold */
+    unsigned short  grfcnt;		/* Global Receive Frame Count */
+    unsigned long   intbase;		/* Multichannel Base address */
+    unsigned long   iintptr;		/* Pointer to interrupt queue */
+    unsigned short  rx_s_ptr;		/* TSTARx Pointer */
+
+    unsigned short  txptr;		/* Current Time slot entry in TSATTx */
+    unsigned long   c_mask32;		/* CRC Constant (debb20e3) */
+    unsigned short  tsatrx[32];		/* Time Slot Assignment Table Rx */
+    unsigned short  tsattx[32];		/* Time Slot Assignment Table Tx */
+    unsigned short  c_mask16;		/* CRC Constant (f0b8) */
+};
+
+/*****************************************************************
+        Quicc32 HDLC parameter RAM
+*****************************************************************/
+struct quicc32_pram {
+
+    unsigned short  tbase;		/* Tx Buffer Descriptors Base Address */
+    unsigned short  chamr;		/* Channel Mode Register */
+    unsigned long   tstate;		/* Tx Internal State */
+    unsigned long   txintr;		/* Tx Internal Data Pointer */
+    unsigned short  tbptr;		/* Tx Buffer Descriptor Pointer */
+    unsigned short  txcntr;		/* Tx Internal Byte Count */
+    unsigned long   tupack;		/* (Tx Temp) */
+    unsigned long   zistate;		/* Zero Insertion machine state */
+    unsigned long   tcrc;		/* Temp Transmit CRC */
+    unsigned short  intmask;		/* Channel's interrupt mask flags */
+    unsigned short  bdflags;		
+    unsigned short  rbase;		/* Rx Buffer Descriptors Base Address */
+    unsigned short  mflr;		/* Max Frame Length Register */
+    unsigned long   rstate;		/* Rx Internal State */
+    unsigned long   rxintr;		/* Rx Internal Data Pointer */
+    unsigned short  rbptr;		/* Rx Buffer Descriptor Pointer */
+    unsigned short  rxbyc;		/* Rx Internal Byte Count */
+    unsigned long   rpack;		/* (Rx Temp) */
+    unsigned long   zdstate;		/* Zero Deletion machine state */
+    unsigned long   rcrc;		/* Temp Transmit CRC */
+    unsigned short  maxc;		/* Max_length counter */
+    unsigned short  tmp_mb;		/* Temp */
+};
+
+
+/*****************************************************************
+        HDLC parameter RAM
+*****************************************************************/
+
+struct hdlc_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * HDLC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   c_mask;         /* CRC constant */
+    unsigned long   c_pres;         /* CRC preset */
+    unsigned short  disfc;          /* discarded frame counter */
+    unsigned short  crcec;          /* CRC error counter */
+    unsigned short  abtsc;          /* abort sequence counter */
+    unsigned short  nmarc;          /* nonmatching address rx cnt */
+    unsigned short  retrc;          /* frame retransmission cnt */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  max_cnt;        /* maximum length counter */
+    unsigned short  rfthr;          /* received frames threshold */
+    unsigned short  rfcnt;          /* received frames count */
+    unsigned short  hmask;          /* user defined frm addr mask */
+    unsigned short  haddr1;         /* user defined frm address 1 */
+    unsigned short  haddr2;         /* user defined frm address 2 */
+    unsigned short  haddr3;         /* user defined frm address 3 */
+    unsigned short  haddr4;         /* user defined frm address 4 */
+    unsigned short  tmp;            /* temp */
+    unsigned short  tmp_mb;         /* temp */
+};
+
+
+
+/*****************************************************************
+        UART parameter RAM
+*****************************************************************/
+
+/*
+ * bits in uart control characters table
+ */
+#define CC_INVALID  0x8000          /* control character is valid */
+#define CC_REJ      0x4000          /* don't store char in buffer */
+#define CC_CHAR     0x00ff          /* control character */
+
+/* UART */
+struct uart_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rx_temp;        /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * UART specific parameter RAM
+     */
+    unsigned char   RESERVED1[8];   /* Reserved area */
+    unsigned short  max_idl;        /* maximum idle characters */
+    unsigned short  idlc;           /* rx idle counter (internal) */
+    unsigned short  brkcr;          /* break count register */
+                   
+    unsigned short  parec;          /* Rx parity error counter */
+    unsigned short  frmer;          /* Rx framing error counter */
+    unsigned short  nosec;          /* Rx noise counter */
+    unsigned short  brkec;          /* Rx break character counter */
+    unsigned short  brkln;          /* Reaceive break length */
+                   
+    unsigned short  uaddr1;         /* address character 1 */
+    unsigned short  uaddr2;         /* address character 2 */
+    unsigned short  rtemp;          /* temp storage */
+    unsigned short  toseq;          /* Tx out of sequence char */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Rx control char mask */
+    unsigned short  rccr;           /* Rx control char register */
+    unsigned short  rlbc;           /* Receive last break char */
+};
+
+
+
+/*****************************************************************
+        BISYNC parameter RAM
+*****************************************************************/
+
+struct bisync_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * BISYNC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   crcc;           /* CRC Constant Temp Value */
+    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
+    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
+    unsigned short  parec;          /* Receive Parity Error Counter */
+    unsigned short  bsync;          /* BISYNC SYNC Character */
+    unsigned short  bdle;           /* BISYNC DLE Character */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Receive Control Character Mask */
+};
+
+/*****************************************************************
+        IOM2 parameter RAM
+        (overlaid on tx bd[5] of SCC channel[2])
+*****************************************************************/
+struct iom2_pram {
+    unsigned short  ci_data;        /* ci data */
+    unsigned short  monitor_data;   /* monitor data */
+    unsigned short  tstate;         /* transmitter state */
+    unsigned short  rstate;         /* receiver state */
+};
+
+/*****************************************************************
+        SPI/SMC parameter RAM
+        (overlaid on tx bd[6,7] of SCC channel[2])
+*****************************************************************/
+
+#define SPI_R       0x8000          /* Ready bit in BD */
+
+struct spi_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+};
+
+struct smc_uart_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  max_idl;        /* Maximum IDLE Characters */
+    unsigned short  idlc;           /* Temporary IDLE Counter */
+    unsigned short  brkln;          /* Last Rx Break Length */
+    unsigned short  brkec;          /* Rx Break Condition Counter */
+    unsigned short  brkcr;          /* Break Count Register (Tx) */
+    unsigned short  r_mask;         /* Temporary bit mask */
+};
+
+struct smc_trnsp_pram {
+    unsigned short  rbase;          /* rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  reserved[5];    /* Reserved */
+};
+
+struct idma_pram {
+    unsigned short  ibase;          /* IDMA BD Base Address */
+    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
+    unsigned long   istate;         /* IDMA internal state */
+    unsigned long   itemp;          /* IDMA temp */
+};
+
+struct ethernet_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * ETHERNET specific parameter RAM
+     */
+    unsigned long   c_pres;         /* preset CRC */
+    unsigned long   c_mask;         /* constant mask for CRC */
+    unsigned long   crcec;          /* CRC error counter */
+    unsigned long   alec;           /* alighnment error counter */
+    unsigned long   disfc;          /* discard frame counter */
+    unsigned short  pads;           /* short frame PAD characters */
+    unsigned short  ret_lim;        /* retry limit threshold */
+    unsigned short  ret_cnt;        /* retry limit counter */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  minflr;         /* minimum frame length reg */
+    unsigned short  maxd1;          /* maximum DMA1 length reg */
+    unsigned short  maxd2;          /* maximum DMA2 length reg */
+    unsigned short  maxd;           /* rx max DMA */
+    unsigned short  dma_cnt;        /* rx dma counter */
+    unsigned short  max_b;          /* max bd byte count */
+    unsigned short  gaddr1;         /* group address filter 1 */
+    unsigned short  gaddr2;         /* group address filter 2 */
+    unsigned short  gaddr3;         /* group address filter 3 */
+    unsigned short  gaddr4;         /* group address filter 4 */
+    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
+    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
+    unsigned long   tbuf0_rba0;
+    unsigned long   tbuf0_crc;
+    unsigned short  tbuf0_bcnt;
+    union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+    } paddr;
+    unsigned short  p_per;          /* persistence */
+    unsigned short  rfbd_ptr;       /* rx first bd pointer */
+    unsigned short  tfbd_ptr;       /* tx first bd pointer */
+    unsigned short  tlbd_ptr;       /* tx last bd pointer */
+    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
+    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
+    unsigned long   tbuf1_rba0;
+    unsigned long   tbuf1_crc;
+    unsigned short  tbuf1_bcnt;
+    unsigned short  tx_len;         /* tx frame length counter */
+    unsigned short  iaddr1;         /* individual address filter 1*/
+    unsigned short  iaddr2;         /* individual address filter 2*/
+    unsigned short  iaddr3;         /* individual address filter 3*/
+    unsigned short  iaddr4;         /* individual address filter 4*/
+    unsigned short  boff_cnt;       /* back-off counter */
+    unsigned short  taddr_h;        /* temp address (MSB) */
+    unsigned short  taddr_m;        /* temp address */
+    unsigned short  taddr_l;        /* temp address (LSB) */
+};
+
+struct transparent_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * TRANSPARENT specific parameter RAM
+     */
+    unsigned long   crc_p;          /* CRC Preset */
+    unsigned long   crc_c;          /* CRC constant */
+};
+
+struct timer_pram {
+    /*
+     * RISC timers parameter RAM
+     */
+    unsigned short  tm_base;        /* RISC timer table base adr */
+    unsigned short  tm_ptr;         /* RISC timer table pointer */
+    unsigned short  r_tmr;          /* RISC timer mode register */
+    unsigned short  r_tmv;          /* RISC timer valid register */
+    unsigned long   tm_cmd;         /* RISC timer cmd register */
+    unsigned long   tm_cnt;         /* RISC timer internal cnt */
+};
+
+#endif
diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h
new file mode 100644
index 00000000000..6d40f4d18e1
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360_quicc.h
@@ -0,0 +1,362 @@
+/***********************************
+ * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of QUICC memory structures
+ ***************************************
+ */
+
+#ifndef __M68360_QUICC_H
+#define __M68360_QUICC_H
+
+/*
+ * include registers and
+ * parameter ram definitions files
+ */
+#include <asm/m68360_regs.h>
+#include <asm/m68360_pram.h>
+
+
+
+/* Buffer Descriptors */
+typedef struct quicc_bd {
+    volatile unsigned short     status;
+    volatile unsigned short     length;
+    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
+} QUICC_BD;
+
+
+#ifdef MOTOROLA_ORIGINAL
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
+    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
+    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extention ram */
+    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
+};
+#else
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
+    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
+    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
+    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
+    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
+};
+#endif
+
+
+/*
+ * internal ram
+ */
+typedef struct quicc {
+	union {
+		struct quicc32_pram ch_pram_tbl[32];	/* 32*64(bytes) per channel */	
+		struct user_data		u;
+	}ch_or_u;	/* multipul or user space */
+
+    /* BASE + 0xc00: PARAMETER RAM */
+	union {
+		struct scc_pram {
+			union {
+				struct hdlc_pram        h;
+				struct uart_pram        u;
+				struct bisync_pram      b;
+				struct transparent_pram t;
+				unsigned char   RESERVED66[0x70];
+			} pscc;               /* scc parameter area (protocol dependent) */
+			union {
+				struct {
+					unsigned char       RESERVED70[0x10];
+					struct spi_pram     spi;
+					unsigned char       RESERVED72[0x8];
+					struct timer_pram   timer;
+				} timer_spi;
+				struct {
+					struct idma_pram idma;
+					unsigned char       RESERVED67[0x4];
+					union {
+						struct smc_uart_pram u;
+						struct smc_trnsp_pram t;
+					} psmc;
+				} idma_smc;
+			} pothers;
+		} scc;
+		struct ethernet_pram    enet_scc;
+		struct global_multi_pram        m;
+		unsigned char   pr[0x100];
+	} pram[4];
+
+    /* reserved */
+
+    /* BASE + 0x1000: INTERNAL REGISTERS */
+    /* SIM */
+    volatile unsigned long      sim_mcr;        /* module configuration reg */
+    volatile unsigned short     sim_simtr;      /* module test register     */
+    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_avr;        /* auto vector reg          */
+    volatile unsigned char      sim_rsr;        /* reset status reg         */
+    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
+    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
+    volatile unsigned short     sim_pllcr;      /* PLL control register     */
+    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
+    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
+    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
+    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
+    volatile unsigned char      sim_sypcr;      /* system protection control*/
+    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
+    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
+    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
+    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
+    volatile unsigned char      sim_swsr;       /* software service         */
+    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
+    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
+    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
+    /* MEMC */
+    volatile unsigned long      memc_gmr;       /* Global memory register   */
+    volatile unsigned short     memc_mstat;     /* MEMC status register     */
+    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
+    volatile unsigned long      memc_br0;       /* base register 0          */
+    volatile unsigned long      memc_or0;       /* option register 0        */
+    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br1;       /* base register 1          */
+    volatile unsigned long      memc_or1;       /* option register 1        */
+    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br2;       /* base register 2          */
+    volatile unsigned long      memc_or2;       /* option register 2        */
+    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br3;       /* base register 3          */
+    volatile unsigned long      memc_or3;       /* option register 3        */
+    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br4;       /* base register 3          */
+    volatile unsigned long      memc_or4;       /* option register 3        */
+    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br5;       /* base register 3          */
+    volatile unsigned long      memc_or5;       /* option register 3        */
+    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br6;       /* base register 3          */
+    volatile unsigned long      memc_or6;       /* option register 3        */
+    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br7;       /* base register 3          */
+    volatile unsigned long      memc_or7;       /* option register 3        */
+    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
+    /* TEST */
+    volatile unsigned short     test_tstmra;    /* master shift a           */
+    volatile unsigned short     test_tstmrb;    /* master shift b           */
+    volatile unsigned short     test_tstsc;     /* shift count              */
+    volatile unsigned short     test_tstrc;     /* repetition counter       */
+    volatile unsigned short     test_creg;      /* control                  */
+    volatile unsigned short     test_dreg;      /* destributed register     */
+    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
+    /* IDMA1 */
+    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
+    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
+    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
+    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
+    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma1_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED20;     /* Reserved area            */
+    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED21;     /* Reserved area            */
+    volatile unsigned char      idma1_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
+    /* SDMA */
+    volatile unsigned char      sdma_sdsr;      /* status reg               */
+    volatile unsigned char      RESERVED23;     /* Reserved area            */
+    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
+    volatile unsigned long      sdma_sdar;      /* address reg              */
+    /* IDMA2 */
+    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
+    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
+    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma2_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED24;     /* Reserved area            */
+    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED25;     /* Reserved area            */
+    volatile unsigned char      idma2_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
+    /* Interrupt Controller */
+    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
+    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
+    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
+    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
+    /* Parallel I/O */
+    volatile unsigned short     pio_padir;      /* port A data direction reg */
+    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
+    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
+    volatile unsigned short     pio_padat;      /* port A data register     */
+    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
+    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
+    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
+    volatile unsigned short     pio_pcso;       /* port C special options   */
+    volatile unsigned short     pio_pcdat;      /* port C data register     */
+    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
+    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
+    /* Timer */
+    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
+    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
+    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
+    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
+    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
+    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
+    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
+    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
+    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
+    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
+    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
+    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
+    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
+    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
+    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
+    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
+    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
+    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
+    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
+    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
+    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
+    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
+    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
+    /* CP */
+    volatile unsigned short     cp_cr;          /* command register         */
+    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rccr;        /* main configuration reg   */
+    volatile unsigned char      RESERVED37;     /* Reserved area            */
+    volatile unsigned char      cp_rmds;        /* development support status reg */
+    volatile unsigned long      cp_rmdr;        /* development support control reg */
+    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
+    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
+    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
+    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
+    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
+    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
+    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
+    /* BRG */
+    union {
+        volatile unsigned long l;
+        struct {
+            volatile unsigned short BRGC_RESERV:14;
+            volatile unsigned short rst:1;
+            volatile unsigned short en:1;
+            volatile unsigned short extc:2;
+            volatile unsigned short atb:1;
+            volatile unsigned short cd:12;
+            volatile unsigned short div16:1;
+        } b;
+    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
+    /* SCC registers */
+    struct scc_regs {
+        union {
+            struct {
+                /* Low word. */
+                volatile unsigned short GSMR_RESERV2:1;
+                volatile unsigned short edge:2;
+                volatile unsigned short tci:1;
+                volatile unsigned short tsnc:2;
+                volatile unsigned short rinv:1;
+                volatile unsigned short tinv:1;
+                volatile unsigned short tpl:3;
+                volatile unsigned short tpp:2;
+                volatile unsigned short tend:1;
+                volatile unsigned short tdcr:2;
+                volatile unsigned short rdcr:2;
+                volatile unsigned short renc:3;
+                volatile unsigned short tenc:3;
+                volatile unsigned short diag:2;
+                volatile unsigned short enr:1;
+                volatile unsigned short ent:1;
+                volatile unsigned short mode:4;
+                /* High word. */
+                volatile unsigned short GSMR_RESERV1:14;
+                volatile unsigned short pri:1;
+                volatile unsigned short gde:1;
+                volatile unsigned short tcrc:2;
+                volatile unsigned short revd:1;
+                volatile unsigned short trx:1;
+                volatile unsigned short ttx:1;
+                volatile unsigned short cdp:1;
+                volatile unsigned short ctsp:1;
+                volatile unsigned short cds:1;
+                volatile unsigned short ctss:1;
+                volatile unsigned short tfl:1;
+                volatile unsigned short rfw:1;
+                volatile unsigned short txsy:1;
+                volatile unsigned short synl:2;
+                volatile unsigned short rtsm:1;
+                volatile unsigned short rsyn:1;
+            } b;
+            struct {
+                volatile unsigned long low;
+                volatile unsigned long high;
+            } w;
+        } scc_gsmr;                         /* SCC general mode reg         */
+        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
+        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
+        volatile unsigned short scc_todr; /* SCC transmit on demand         */
+        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
+        volatile unsigned short scc_scce;       /* SCC event reg            */
+        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
+        volatile unsigned short scc_sccm;       /* SCC mask reg             */
+        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
+        volatile unsigned char  scc_sccs;       /* SCC status reg           */
+        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
+    } scc_regs[4];
+    /* SMC */
+    struct smc_regs {
+        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
+        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
+        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
+        volatile unsigned char  smc_smce;        /* SMC event reg           */
+        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
+        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
+        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
+    } smc_regs[2];
+    /* SPI */
+    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
+    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
+    volatile unsigned char      spi_spie;       /* SPI event reg            */
+    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
+    volatile unsigned char      spi_spim;       /* SPI mask reg             */
+    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
+    volatile unsigned char      spi_spcom;      /* SPI command reg          */
+    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
+    /* PIP */
+    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
+    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
+    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
+    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
+    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
+    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
+    volatile unsigned long      pip_pbdat;      /* port b data reg          */
+    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
+    /* Serial Interface */
+    volatile unsigned long      si_simode;      /* SI mode register         */
+    volatile unsigned char      si_sigmr;       /* SI global mode register  */
+    volatile unsigned char      RESERVED55;     /* Reserved area            */
+    volatile unsigned char      si_sistr;       /* SI status register       */
+    volatile unsigned char      si_sicmr;       /* SI command register      */
+    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
+    volatile unsigned long      si_sicr;        /* SI clock routing         */
+    volatile unsigned long      si_sirp;        /* SI ram pointers          */
+    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
+    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
+} QUICC;
+
+#endif
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */
diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h
new file mode 100644
index 00000000000..d57217ca4f2
--- /dev/null
+++ b/arch/m68knommu/include/asm/m68360_regs.h
@@ -0,0 +1,408 @@
+/***********************************
+ * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the QUICC registers
+ ***************************************
+ */
+
+#ifndef __REGISTERS_H
+#define __REGISTERS_H
+
+#define CLEAR_BIT(x, bit)  x =bit 
+
+/*****************************************************************
+        Command Register
+*****************************************************************/
+
+/* bit fields within command register */
+#define SOFTWARE_RESET  0x8000
+#define CMD_OPCODE      0x0f00
+#define CMD_CHANNEL     0x00f0
+#define CMD_FLAG        0x0001
+
+/* general command opcodes */
+#define INIT_RXTX_PARAMS        0x0000
+#define INIT_RX_PARAMS          0x0100
+#define INIT_TX_PARAMS          0x0200
+#define ENTER_HUNT_MODE         0x0300
+#define STOP_TX                 0x0400
+#define GR_STOP_TX              0x0500
+#define RESTART_TX              0x0600
+#define CLOSE_RX_BD             0x0700
+#define SET_ENET_GROUP          0x0800
+#define RESET_ENET_GROUP        0x0900
+
+/* quicc32 CP commands */
+#define STOP_TX_32		0x0e00	/*add chan# bits 2-6 */
+#define ENTER_HUNT_MODE_32	0x1e00
+
+/* quicc32 mask/event SCC register */
+#define GOV	0x01
+#define GUN	0x02
+#define GINT	0x04
+#define IQOV	0x08
+
+
+/* Timer commands */
+#define SET_TIMER               0x0800
+
+/* Multi channel Interrupt structure */
+#define INTR_VALID	0x8000	/* Valid interrupt entry */
+#define INTR_WRAP	0x4000	/* Wrap bit in the interrupt entry table */
+#define INTR_CH_NU	0x07c0	/* Channel Num in interrupt table */
+#define INTR_MASK_BITS	0x383f
+
+/*
+ * General SCC mode register (GSMR)
+ */
+
+#define MODE_HDLC               0x0
+#define MODE_APPLE_TALK         0x2
+#define MODE_SS7                0x3
+#define MODE_UART               0x4
+#define MODE_PROFIBUS           0x5
+#define MODE_ASYNC_HDLC         0x6
+#define MODE_V14                0x7
+#define MODE_BISYNC             0x8
+#define MODE_DDCMP              0x9
+#define MODE_MULTI_CHANNEL      0xa
+#define MODE_ETHERNET           0xc
+
+#define DIAG_NORMAL             0x0
+#define DIAG_LOCAL_LPB          0x1
+#define DIAG_AUTO_ECHO          0x2
+#define DIAG_LBP_ECHO           0x3
+
+/* For RENC and TENC fields in GSMR */
+#define ENC_NRZ                 0x0
+#define ENC_NRZI                0x1
+#define ENC_FM0                 0x2
+#define ENC_MANCH               0x4
+#define ENC_DIFF_MANC           0x6
+
+/* For TDCR and RDCR fields in GSMR */
+#define CLOCK_RATE_1            0x0
+#define CLOCK_RATE_8            0x1
+#define CLOCK_RATE_16           0x2
+#define CLOCK_RATE_32           0x3
+
+#define TPP_00                  0x0
+#define TPP_10                  0x1
+#define TPP_01                  0x2
+#define TPP_11                  0x3
+
+#define TPL_NO                  0x0
+#define TPL_8                   0x1
+#define TPL_16                  0x2
+#define TPL_32                  0x3
+#define TPL_48                  0x4
+#define TPL_64                  0x5
+#define TPL_128                 0x6
+
+#define TSNC_INFINITE           0x0
+#define TSNC_14_65              0x1
+#define TSNC_4_15               0x2
+#define TSNC_3_1                0x3
+
+#define EDGE_BOTH               0x0
+#define EDGE_POS                0x1
+#define EDGE_NEG                0x2
+#define EDGE_NO                 0x3
+
+#define SYNL_NO                 0x0
+#define SYNL_4                  0x1
+#define SYNL_8                  0x2
+#define SYNL_16                 0x3
+
+#define TCRC_CCITT16            0x0
+#define TCRC_CRC16              0x1
+#define TCRC_CCITT32            0x2
+
+
+/*****************************************************************
+        TODR (Transmit on demand) Register
+*****************************************************************/
+#define TODR_TOD        0x8000  /* Transmit on demand */
+
+
+/*****************************************************************
+        CICR register settings
+*****************************************************************/
+
+/* note that relative irq priorities of the SCCs can be reordered
+ * if desired - see p. 7-377 of the MC68360UM */
+#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
+#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
+#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
+#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
+
+#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
+#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
+#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
+#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
+
+
+/*****************************************************************
+       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
+*****************************************************************/
+
+#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
+#define INTR_SCC1       0x40000000      /* SCC port 1 */
+#define INTR_SCC2       0x20000000      /* SCC port 2 */
+#define INTR_SCC3       0x10000000      /* SCC port 3 */
+#define INTR_SCC4       0x08000000      /* SCC port 4 */
+#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
+#define INTR_TIMER1     0x02000000      /* timer 1 */
+#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
+#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
+#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
+#define INTR_DMA1       0x00200000      /* idma 1 */
+#define INTR_DMA2       0x00100000      /* idma 2 */
+#define INTR_TIMER2     0x00040000      /* timer 2 */
+#define INTR_CP_TIMER   0x00020000      /* CP timer */
+#define INTR_PIP_STATUS 0x00010000      /* PIP status */
+#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
+#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
+#define INTR_TIMER3     0x00001000      /* timer 3 */
+#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
+#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
+#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
+#define INTR_TIMER4     0x00000080      /* timer 4 */
+#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
+#define INTR_SCP        0x00000020      /* SCP */
+#define INTR_SMC1       0x00000010      /* SMC 1 */
+#define INTR_SMC2       0x00000008      /* SMC 2 */
+#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
+#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
+#define INTR_ERR        0x00000001      /* error */
+
+
+/*****************************************************************
+        CPM Interrupt vector encodings (MC68360UM p. 7-376)
+*****************************************************************/
+
+#define CPMVEC_NR		32
+#define CPMVEC_PIO_PC0		0x1f
+#define CPMVEC_SCC1		0x1e
+#define CPMVEC_SCC2		0x1d
+#define CPMVEC_SCC3		0x1c
+#define CPMVEC_SCC4		0x1b
+#define CPMVEC_PIO_PC1		0x1a
+#define CPMVEC_TIMER1		0x19
+#define CPMVEC_PIO_PC2		0x18
+#define CPMVEC_PIO_PC3		0x17
+#define CPMVEC_SDMA_CB_ERR	0x16
+#define CPMVEC_IDMA1		0x15
+#define CPMVEC_IDMA2		0x14
+#define CPMVEC_RESERVED3	0x13
+#define CPMVEC_TIMER2		0x12
+#define CPMVEC_RISCTIMER	0x11
+#define CPMVEC_RESERVED2	0x10
+#define CPMVEC_PIO_PC4		0x0f
+#define CPMVEC_PIO_PC5		0x0e
+#define CPMVEC_TIMER3		0x0c
+#define CPMVEC_PIO_PC6		0x0b
+#define CPMVEC_PIO_PC7		0x0a
+#define CPMVEC_PIO_PC8		0x09
+#define CPMVEC_RESERVED1	0x08
+#define CPMVEC_TIMER4		0x07
+#define CPMVEC_PIO_PC9		0x06
+#define CPMVEC_SPI		0x05
+#define CPMVEC_SMC1		0x04
+#define CPMVEC_SMC2		0x03
+#define CPMVEC_PIO_PC10		0x02
+#define CPMVEC_PIO_PC11		0x01
+#define CPMVEC_ERROR		0x00
+
+/* #define CPMVEC_PIO_PC0		((ushort)0x1f) */
+/* #define CPMVEC_SCC1		((ushort)0x1e) */
+/* #define CPMVEC_SCC2		((ushort)0x1d) */
+/* #define CPMVEC_SCC3		((ushort)0x1c) */
+/* #define CPMVEC_SCC4		((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC1		((ushort)0x1a) */
+/* #define CPMVEC_TIMER1		((ushort)0x19) */
+/* #define CPMVEC_PIO_PC2		((ushort)0x18) */
+/* #define CPMVEC_PIO_PC3		((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
+/* #define CPMVEC_IDMA1		((ushort)0x15) */
+/* #define CPMVEC_IDMA2		((ushort)0x14) */
+/* #define CPMVEC_RESERVED3	((ushort)0x13) */
+/* #define CPMVEC_TIMER2		((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
+/* #define CPMVEC_RESERVED2	((ushort)0x10) */
+/* #define CPMVEC_PIO_PC4		((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC5		((ushort)0x0e) */
+/* #define CPMVEC_TIMER3		((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC6		((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC7		((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC8		((ushort)0x09) */
+/* #define CPMVEC_RESERVED1	((ushort)0x08) */
+/* #define CPMVEC_TIMER4		((ushort)0x07) */
+/* #define CPMVEC_PIO_PC9		((ushort)0x06) */
+/* #define CPMVEC_SPI		((ushort)0x05) */
+/* #define CPMVEC_SMC1		((ushort)0x04) */
+/* #define CPMVEC_SMC2		((ushort)0x03) */
+/* #define CPMVEC_PIO_PC10		((ushort)0x02) */
+/* #define CPMVEC_PIO_PC11		((ushort)0x01) */
+/* #define CPMVEC_ERROR		((ushort)0x00) */
+
+
+/*****************************************************************
+ *        PIO control registers
+ *****************************************************************/
+
+/* Port A - See 360UM p. 7-358
+ * 
+ *  Note that most of these pins have alternate functions
+ */
+
+
+/* The macros are nice, but there are all sorts of references to 1-indexed
+ * facilities on the 68360... */
+/* #define PA_RXD(n)	((ushort)(0x01<<(2*n))) */
+/* #define PA_TXD(n)	((ushort)(0x02<<(2*n))) */
+
+#define PA_RXD1		((ushort)0x0001)
+#define PA_TXD1		((ushort)0x0002)
+#define PA_RXD2		((ushort)0x0004)
+#define PA_TXD2		((ushort)0x0008)
+#define PA_RXD3		((ushort)0x0010)
+#define PA_TXD3		((ushort)0x0020)
+#define PA_RXD4		((ushort)0x0040)
+#define PA_TXD4		((ushort)0x0080)
+
+#define PA_CLK1		((ushort)0x0100)
+#define PA_CLK2		((ushort)0x0200)
+#define PA_CLK3		((ushort)0x0400)
+#define PA_CLK4		((ushort)0x0800)
+#define PA_CLK5		((ushort)0x1000)
+#define PA_CLK6		((ushort)0x2000)
+#define PA_CLK7		((ushort)0x4000)
+#define PA_CLK8		((ushort)0x8000)
+
+
+/* Port B - See 360UM p. 7-362
+ */
+
+
+/* Port C - See 360UM p. 7-365
+ */
+
+#define PC_RTS1		((ushort)0x0001)
+#define PC_RTS2		((ushort)0x0002)
+#define PC__RTS3	((ushort)0x0004) /* !RTS3 */
+#define PC__RTS4	((ushort)0x0008) /* !RTS4 */
+
+#define PC_CTS1		((ushort)0x0010)
+#define PC_CD1		((ushort)0x0020)
+#define PC_CTS2		((ushort)0x0040)
+#define PC_CD2		((ushort)0x0080)
+#define PC_CTS3		((ushort)0x0100)
+#define PC_CD3		((ushort)0x0200)
+#define PC_CTS4		((ushort)0x0400)
+#define PC_CD4		((ushort)0x0800)
+
+
+
+/*****************************************************************
+        chip select option register
+*****************************************************************/
+#define DTACK           0xe000
+#define ADR_MASK        0x1ffc
+#define RDWR_MASK       0x0002
+#define FC_MASK         0x0001
+
+/*****************************************************************
+        tbase and rbase registers
+*****************************************************************/
+#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
+#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
+#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
+#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
+#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define INCREASE_TBD(bd,quicc,pram) {  \
+    if((bd)->status & T_W)             \
+        (bd) = TBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_TBD(bd,quicc,pram) {  \
+    if ((bd) == TBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+#define INCREASE_RBD(bd,quicc,pram) {  \
+    if((bd)->status & R_W)             \
+        (bd) = RBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_RBD(bd,quicc,pram) {  \
+    if ((bd) == RBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+
+/*****************************************************************
+        Macros for Multi channel
+*****************************************************************/
+#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
+#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
+#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
+		(&(quicc->ch_or_u.ch_pram_tbl[channel])))
+#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
+#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
+#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
+#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
+#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+
+#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & T_W)                        \
+        (bd) = TBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & R_W)                        \
+        (bd) = RBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+
+#endif
diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68knommu/include/asm/machdep.h
new file mode 100644
index 00000000000..de9f47a51cc
--- /dev/null
+++ b/arch/m68knommu/include/asm/machdep.h
@@ -0,0 +1,26 @@
+#ifndef _M68KNOMMU_MACHDEP_H
+#define _M68KNOMMU_MACHDEP_H
+
+#include <linux/interrupt.h>
+
+/* Hardware clock functions */
+extern void hw_timer_init(void);
+extern unsigned long hw_timer_offset(void);
+
+extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
+
+/* Machine dependent time handling */
+extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
+			   int *min, int *sec);
+extern int (*mach_set_clock_mmss)(unsigned long);
+
+/* machine dependent power off functions */
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+
+extern void config_BSP(char *command, int len);
+
+extern void do_IRQ(int irq, struct pt_regs *fp);
+
+#endif /* _M68KNOMMU_MACHDEP_H */
diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h
new file mode 100644
index 00000000000..7e7090517b7
--- /dev/null
+++ b/arch/m68knommu/include/asm/math-emu.h
@@ -0,0 +1 @@
+#include <asm-m68k/math-emu.h>
diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..907a0481a14
--- /dev/null
+++ b/arch/m68knommu/include/asm/mc146818rtc.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _M68KNOMMU_MC146818RTC_H
+#define _M68KNOMMU_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _M68KNOMMU_MC146818RTC_H */
diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h
new file mode 100644
index 00000000000..c042634fada
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfcache.h
@@ -0,0 +1,150 @@
+/****************************************************************************/
+
+/*
+ *	mcfcache.h -- ColdFire CPU cache support code
+ *
+ *	(C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef	__M68KNOMMU_MCFCACHE_H
+#define	__M68KNOMMU_MCFCACHE_H
+/****************************************************************************/
+
+
+/*
+ *	The different ColdFire families have different cache arrangments.
+ *	Everything from a small instruction only cache, to configurable
+ *	data and/or instruction cache, to unified instruction/data, to 
+ *	harvard style separate instruction and data caches.
+ */
+
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+/*
+ *	Simple version 2 core cache. These have instruction cache only,
+ *	we just need to invalidate it and enable it.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate cache cmd */
+	movec	%d0,%CACR		/* do invalidate cache */
+	movel	#0x80000100,%d0		/* setup cache mask */
+	movec	%d0,%CACR		/* enable cache */
+.endm
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
+/*
+ *	New version 2 cores have a configurable split cache arrangement.
+ *	For now I am just enabling instruction cache - but ultimately I
+ *	think a split instruction/data cache would be better.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01400000,%d0
+	movec	%d0,%CACR		/* invalidate cache */
+	nop
+	movel	#0x0000c000,%d0		/* set SDRAM cached only */
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0x80400100,%d0		/* configure cache */
+	movec	%d0,%CACR		/* enable cache */
+	nop
+.endm
+#endif /* CONFIG_M523x || CONFIG_M527x */
+
+#if defined(CONFIG_M528x)
+.macro CACHE_ENABLE
+	nop
+	movel	#0x01000000, %d0
+	movec	%d0, %CACR		/* Invalidate cache */
+	nop
+	movel	#0x0000c020, %d0	/* Set SDRAM cached only */
+	movec	%d0, %ACR0
+	movel	#0x00000000, %d0	/* No other regions cached */
+	movec	%d0, %ACR1
+	movel	#0x80000200, %d0	/* Setup cache mask */
+	movec	%d0, %CACR		/* Enable cache */
+	nop
+.endm
+#endif /* CONFIG_M528x */
+
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
+/*
+ *	The version 3 core cache. Oddly enough the version 2 core 5249
+ *	has the same SDRAM and cache setup as the version 3 cores.
+ *	This is a single unified instruction/data cache.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
+	movel	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
+#else
+	movel	#0x0000c020,%d0		/* set SDRAM cached (copyback) */
+#endif
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0xa0000200,%d0		/* enable cache */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M5249 || CONFIG_M5307 */
+
+#if defined(CONFIG_M532x)
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate cache cmd */
+	movec	%d0,%CACR		/* do invalidate cache */
+	nop
+	movel	#0x4001C000,%d0		/* set SDRAM cached (write-thru) */
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0x80000200,%d0		/* setup cache mask */
+	movec	%d0,%CACR		/* enable cache */
+	nop
+.endm
+#endif /* CONFIG_M532x */
+
+#if defined(CONFIG_M5407)
+/*
+ *	Version 4 cores have a true harvard style separate instruction
+ *	and data cache. Invalidate and enable cache, also enable write
+ *	buffers and branch accelerator.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01040100,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+	movel	#0x000fc000,%d0		/* set SDRAM cached only */
+	movec	%d0, %ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0, %ACR1
+	movel	#0x000fc000,%d0		/* set SDRAM cached only */
+	movec	%d0, %ACR2
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0, %ACR3
+	movel	#0xb6088400,%d0		/* enable caches */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M5407 */
+
+#if defined(CONFIG_M520x)
+.macro CACHE_ENABLE
+	move.l	#0x01000000,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+	move.l	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
+	movec	%d0,%ACR0
+	move.l	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	move.l	#0x80400000,%d0		/* enable 8K instruction cache */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M520x */
+
+/****************************************************************************/
+#endif	/* __M68KNOMMU_MCFCACHE_H */
diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h
new file mode 100644
index 00000000000..705c52c79cd
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfdma.h
@@ -0,0 +1,144 @@
+/****************************************************************************/
+
+/*
+ *	mcfdma.h -- Coldfire internal DMA support defines.
+ *
+ *	(C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
+ */
+
+/****************************************************************************/
+#ifndef	mcfdma_h
+#define	mcfdma_h
+/****************************************************************************/
+
+
+/*
+ *	Get address specific defines for this Coldfire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define	MCFDMA_BASE0		0x200		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x240		/* Base address of DMA 1 */
+#elif defined(CONFIG_M5272)
+#define	MCFDMA_BASE0		0x0e0		/* Base address of DMA 0 */
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+/* These are relative to the IPSBAR, not MBAR */
+#define	MCFDMA_BASE0		0x100		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x140		/* Base address of DMA 1 */
+#define	MCFDMA_BASE2		0x180		/* Base address of DMA 2 */
+#define	MCFDMA_BASE3		0x1C0		/* Base address of DMA 3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define	MCFDMA_BASE0		0x300		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x340		/* Base address of DMA 1 */
+#define	MCFDMA_BASE2		0x380		/* Base address of DMA 2 */
+#define	MCFDMA_BASE3		0x3C0		/* Base address of DMA 3 */
+#endif
+
+
+#if !defined(CONFIG_M5272)
+
+/*
+ *	Define the DMA register set addresses.
+ *      Note: these are longword registers, use unsigned long as data type
+ */
+#define	MCFDMA_SAR		0x00		/* DMA source address (r/w) */
+#define	MCFDMA_DAR		0x01		/* DMA destination adr (r/w) */
+/* these are word registers, use unsigned short data type */
+#define	MCFDMA_DCR		0x04		/* DMA control reg (r/w) */
+#define	MCFDMA_BCR		0x06		/* DMA byte count reg (r/w) */
+/* these are byte registers, use unsiged char data type */
+#define	MCFDMA_DSR		0x10		/* DMA status reg (r/w) */
+#define	MCFDMA_DIVR		0x14		/* DMA interrupt vec (r/w) */
+
+/*
+ *	Bit definitions for the DMA Control Register (DCR).
+ */
+#define	MCFDMA_DCR_INT	        0x8000		/* Enable completion irq */
+#define	MCFDMA_DCR_EEXT	        0x4000		/* Enable external DMA req */
+#define	MCFDMA_DCR_CS 	        0x2000		/* Enable cycle steal */
+#define	MCFDMA_DCR_AA   	0x1000		/* Enable auto alignment */
+#define	MCFDMA_DCR_BWC_MASK  	0x0E00		/* Bandwidth ctl mask */
+#define MCFDMA_DCR_BWC_512      0x0200          /* Bandwidth:   512 Bytes */
+#define MCFDMA_DCR_BWC_1024     0x0400          /* Bandwidth:  1024 Bytes */
+#define MCFDMA_DCR_BWC_2048     0x0600          /* Bandwidth:  2048 Bytes */
+#define MCFDMA_DCR_BWC_4096     0x0800          /* Bandwidth:  4096 Bytes */
+#define MCFDMA_DCR_BWC_8192     0x0a00          /* Bandwidth:  8192 Bytes */
+#define MCFDMA_DCR_BWC_16384    0x0c00          /* Bandwidth: 16384 Bytes */
+#define MCFDMA_DCR_BWC_32768    0x0e00          /* Bandwidth: 32768 Bytes */
+#define	MCFDMA_DCR_SAA         	0x0100		/* Single Address Access */
+#define	MCFDMA_DCR_S_RW        	0x0080		/* SAA read/write value */
+#define	MCFDMA_DCR_SINC        	0x0040		/* Source addr inc enable */
+#define	MCFDMA_DCR_SSIZE_MASK  	0x0030		/* Src xfer size */
+#define	MCFDMA_DCR_SSIZE_LONG  	0x0000		/* Src xfer size, 00 = longw */
+#define	MCFDMA_DCR_SSIZE_BYTE  	0x0010		/* Src xfer size, 01 = byte */
+#define	MCFDMA_DCR_SSIZE_WORD  	0x0020		/* Src xfer size, 10 = word */
+#define	MCFDMA_DCR_SSIZE_LINE  	0x0030		/* Src xfer size, 11 = line */
+#define	MCFDMA_DCR_DINC        	0x0008		/* Dest addr inc enable */
+#define	MCFDMA_DCR_DSIZE_MASK  	0x0006		/* Dest xfer size */
+#define	MCFDMA_DCR_DSIZE_LONG  	0x0000		/* Dest xfer size, 00 = long */
+#define	MCFDMA_DCR_DSIZE_BYTE  	0x0002		/* Dest xfer size, 01 = byte */
+#define	MCFDMA_DCR_DSIZE_WORD  	0x0004		/* Dest xfer size, 10 = word */
+#define	MCFDMA_DCR_DSIZE_LINE  	0x0006		/* Dest xfer size, 11 = line */
+#define	MCFDMA_DCR_START       	0x0001		/* Start transfer */
+
+/*
+ *	Bit definitions for the DMA Status Register (DSR).
+ */
+#define	MCFDMA_DSR_CE	        0x40		/* Config error */
+#define	MCFDMA_DSR_BES	        0x20		/* Bus Error on source */
+#define	MCFDMA_DSR_BED 	        0x10		/* Bus Error on dest */
+#define	MCFDMA_DSR_REQ   	0x04		/* Requests remaining */
+#define	MCFDMA_DSR_BSY  	0x02		/* Busy */
+#define	MCFDMA_DSR_DONE        	0x01		/* DMA transfer complete */
+
+#else /* This is an MCF5272 */
+
+#define MCFDMA_DMR        0x00    /* Mode Register (r/w) */
+#define MCFDMA_DIR        0x03    /* Interrupt trigger register (r/w) */
+#define MCFDMA_DSAR       0x03    /* Source Address register (r/w) */
+#define MCFDMA_DDAR       0x04    /* Destination Address register (r/w) */
+#define MCFDMA_DBCR       0x02    /* Byte Count Register (r/w) */
+
+/* Bit definitions for the DMA Mode Register (DMR) */
+#define MCFDMA_DMR_RESET     0x80000000L /* Reset bit */
+#define MCFDMA_DMR_EN        0x40000000L /* DMA enable */
+#define MCFDMA_DMR_RQM       0x000C0000L /* Request Mode Mask */
+#define MCFDMA_DMR_RQM_DUAL  0x000C0000L /* Dual address mode, the only valid mode */
+#define MCFDMA_DMR_DSTM      0x00002000L /* Destination addressing mask */
+#define MCFDMA_DMR_DSTM_SA   0x00000000L /* Destination uses static addressing */
+#define MCFDMA_DMR_DSTM_IA   0x00002000L /* Destination uses incremental addressing */
+#define MCFDMA_DMR_DSTT_UD   0x00000400L /* Destination is user data */
+#define MCFDMA_DMR_DSTT_UC   0x00000800L /* Destination is user code */
+#define MCFDMA_DMR_DSTT_SD   0x00001400L /* Destination is supervisor data */
+#define MCFDMA_DMR_DSTT_SC   0x00001800L /* Destination is supervisor code */
+#define MCFDMA_DMR_DSTS_OFF  0x8         /* offset to the destination size bits */
+#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
+#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
+#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
+#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
+#define MCFDMA_DMR_SRCM      0x00000020L /* Source addressing mask */
+#define MCFDMA_DMR_SRCM_SA   0x00000000L /* Source uses static addressing */
+#define MCFDMA_DMR_SRCM_IA   0x00000020L /* Source uses incremental addressing */
+#define MCFDMA_DMR_SRCT_UD   0x00000004L /* Source is user data */
+#define MCFDMA_DMR_SRCT_UC   0x00000008L /* Source is user code */
+#define MCFDMA_DMR_SRCT_SD   0x00000014L /* Source is supervisor data */
+#define MCFDMA_DMR_SRCT_SC   0x00000018L /* Source is supervisor code */
+#define MCFDMA_DMR_SRCS_OFF  0x0         /* Offset to the source size bits */
+#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
+#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
+#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
+#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
+
+/* Bit definitions for the DMA interrupt register (DIR) */
+#define MCFDMA_DIR_INVEN     0x1000 /* Invalid Combination interrupt enable */
+#define MCFDMA_DIR_ASCEN     0x0800 /* Address Sequence Complete (Completion) interrupt enable */
+#define MCFDMA_DIR_TEEN      0x0200 /* Transfer Error interrupt enable */
+#define MCFDMA_DIR_TCEN      0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
+#define MCFDMA_DIR_INV       0x0010 /* Invalid Combination */
+#define MCFDMA_DIR_ASC       0x0008 /* Address Sequence Complete (DMA Completion) */
+#define MCFDMA_DIR_TE        0x0002 /* Transfer Error */
+#define MCFDMA_DIR_TC        0x0001 /* Transfer Complete */
+
+#endif /* !defined(CONFIG_M5272) */ 
+
+/****************************************************************************/
+#endif	/* mcfdma_h */
diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h
new file mode 100644
index 00000000000..319899c47a2
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfmbus.h
@@ -0,0 +1,77 @@
+/****************************************************************************/
+
+/*
+ *      mcfmbus.h -- Coldfire MBUS support defines.
+ *
+ *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
+ */
+
+/****************************************************************************/
+
+
+#ifndef mcfmbus_h
+#define mcfmbus_h
+
+
+#define MCFMBUS_BASE		0x280
+#define MCFMBUS_IRQ_VECTOR	0x19
+#define MCFMBUS_IRQ		0x1
+#define MCFMBUS_CLK		0x3f
+#define MCFMBUS_IRQ_LEVEL	0x07	/*IRQ Level 1*/
+#define MCFMBUS_ADDRESS		0x01
+
+
+/*
+*	Define the 5307 MBUS register set addresses
+*/
+
+#define MCFMBUS_MADR	0x00
+#define MCFMBUS_MFDR	0x04
+#define MCFMBUS_MBCR	0x08
+#define MCFMBUS_MBSR	0x0C
+#define MCFMBUS_MBDR	0x10
+
+
+#define MCFMBUS_MADR_ADDR(a)	(((a)&0x7F)<<0x01) /*Slave Address*/
+
+#define MCFMBUS_MFDR_MBC(a)	((a)&0x3F)	   /*M-Bus Clock*/
+
+/*
+*	Define bit flags in Control Register
+*/
+
+#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
+#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
+#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
+#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
+#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
+#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
+
+/*
+*	Define bit flags in Status Register
+*/
+
+#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
+#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
+#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
+#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
+#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
+#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
+#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
+
+/*
+*	Define bit flags in DATA I/O Register
+*/
+
+#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
+
+#define MBUSIOCSCLOCK		1
+#define MBUSIOCGCLOCK		2
+#define MBUSIOCSADDR			3
+#define MBUSIOCGADDR			4
+#define MBUSIOCSSLADDR			5
+#define MBUSIOCGSLADDR			6
+#define MBUSIOCSSUBADDR			7
+#define MBUSIOCGSUBADDR			8
+
+#endif
diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68knommu/include/asm/mcfne.h
new file mode 100644
index 00000000000..431f63aadd0
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfne.h
@@ -0,0 +1,325 @@
+/****************************************************************************/
+
+/*
+ *	mcfne.h -- NE2000 in ColdFire eval boards.
+ *
+ *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000,      Lineo (www.lineo.com)
+ *	(C) Copyright 2001,      SnapGear (www.snapgear.com)
+ *
+ *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
+ *
+ *      Hacked support for m5206e Cadre III evaluation board
+ *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
+ */
+
+/****************************************************************************/
+#ifndef	mcfne_h
+#define	mcfne_h
+/****************************************************************************/
+
+
+/*
+ *	Support for NE2000 clones devices in ColdFire based boards.
+ *	Not all boards address these parts the same way, some use a
+ *	direct addressing method, others use a side-band address space
+ *	to access odd address registers, some require byte swapping
+ *	others do not.
+ */
+#define	BSWAP(w)	(((w) << 8) | ((w) >> 8))
+#define	RSWAP(w)	(w)
+
+
+/*
+ *	Define the basic hardware resources of NE2000 boards.
+ */
+
+#if defined(CONFIG_ARN5206)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define	NE2000_IRQ_VECTOR	0xf0
+#define	NE2000_IRQ_PRIORITY	2
+#define	NE2000_IRQ_LEVEL	4
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206eC3)
+#define	NE2000_ADDR		0x40000300
+#define	NE2000_ODDOFFSET	0x00010000
+#define	NE2000_IRQ_VECTOR	0x1c
+#define	NE2000_IRQ_PRIORITY	2
+#define	NE2000_IRQ_LEVEL	4
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+#define NE2000_ADDR		0x30000300
+#define NE2000_IRQ_VECTOR	25
+#define NE2000_IRQ_PRIORITY	1
+#define NE2000_IRQ_LEVEL	3
+#define	NE2000_BYTE		volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5307C3)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+#define NE2000_ADDR		0x30600300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR	67
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
+#define NE2000_ADDR0		0x30600300
+#define NE2000_ADDR1		0x30800300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR0	27
+#define NE2000_IRQ_VECTOR1	29
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
+#define NE2000_ADDR		0x30600300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR	27
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_ARN5307)
+#define NE2000_ADDR		0xfe600300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define NE2000_IRQ_PRIORITY	2
+#define NE2000_IRQ_LEVEL	3
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5407C3)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+/****************************************************************************/
+
+/*
+ *	Side-band address space for odd address requires re-mapping
+ *	many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define	outb	ne2000_outb
+#define	inb	ne2000_inb
+#define	outb_p	ne2000_outb
+#define	inb_p	ne2000_inb
+#define	outsb	ne2000_outsb
+#define	outsw	ne2000_outsw
+#define	insb	ne2000_insb
+#define	insw	ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int  ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ *	This macro converts a conventional register address into the
+ *	real memory pointer of the mapped NE2000 device.
+ *	On most NE2000 implementations on ColdFire boards the chip is
+ *	mapped in kinda funny, due to its ISA heritage.
+ */
+#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define	NE2000_DATA_PTR(addr)	(addr)
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+	NE2000_BYTE	*rp;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	*rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+	NE2000_BYTE	*rp, val;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	val = *rp;
+	return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *rp;
+		*buf++ = RSWAP(val);
+	}
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = BSWAP(w);
+	}
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = RSWAP(val);
+	}
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *buf++;
+		*rp = BSWAP(w);
+	}
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+
+#ifdef COLDFIRE_NE2000_FUNCS
+
+/*
+ *	Lastly the interrupt set up code...
+ *	Minor differences between the different board types.
+ */
+
+#if defined(CONFIG_ARN5206)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206eC3)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+	mcf_autovector(irq);
+}
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned long	*icrp;
+	volatile unsigned long	*pitr;
+
+	/* The NE2000 device uses external IRQ3 */
+	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = (*icrp & 0x77077777) | 0x00d00000;
+
+	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
+	*pitr = *pitr | 0x20000000;
+}
+
+void ne2000_irqack(int irq)
+{
+	volatile unsigned long	*icrp;
+
+	/* The NE2000 device uses external IRQ3 */
+	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = (*icrp & 0x77777777) | 0x00800000;
+}
+#endif
+
+#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+
+void ne2000_irqsetup(int irq)
+{
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+	mcf_autovector(irq);
+}
+
+#else
+
+void ne2000_irqsetup(int irq)
+{
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+}
+
+#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
+#endif /* CONFIG_M5307 || CONFIG_M5407 */
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+
+/****************************************************************************/
+#endif	/* mcfne_h */
diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h
new file mode 100644
index 00000000000..f1507dd06ec
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfpci.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+
+/*
+ *	mcfpci.h -- PCI bridge on ColdFire eval boards.
+ *
+ *	(C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	mcfpci_h
+#define	mcfpci_h
+/****************************************************************************/
+
+
+#ifdef CONFIG_PCI
+
+/*
+ *	Address regions in the PCI address space are not mapped into the
+ *	normal memory space of the ColdFire. They must be accessed via
+ *	handler routines. This is easy for I/O space (inb/outb/etc) but
+ *	needs some code changes to support ordinary memory. Interrupts
+ *	also need to be vectored through the PCI handler first, then it
+ *	will call the actual driver sub-handlers.
+ */
+
+/*
+ *	Un-define all the standard I/O access routines.
+ */
+#undef	inb
+#undef	inw
+#undef	inl
+#undef	inb_p
+#undef	inw_p
+#undef	insb
+#undef	insw
+#undef	insl
+#undef	outb
+#undef	outw
+#undef	outl
+#undef	outb_p
+#undef	outw_p
+#undef	outsb
+#undef	outsw
+#undef	outsl
+
+#undef	request_irq
+#undef	free_irq
+
+#undef	bus_to_virt
+#undef	virt_to_bus
+
+
+/*
+ *	Re-direct all I/O memory accesses functions to PCI specific ones.
+ */
+#define	inb	pci_inb
+#define	inw	pci_inw
+#define	inl	pci_inl
+#define	inb_p	pci_inb
+#define	inw_p	pci_inw
+#define	insb	pci_insb
+#define	insw	pci_insw
+#define	insl	pci_insl
+
+#define	outb	pci_outb
+#define	outw	pci_outw
+#define	outl	pci_outl
+#define	outb_p	pci_outb
+#define	outw_p	pci_outw
+#define	outsb	pci_outsb
+#define	outsw	pci_outsw
+#define	outsl	pci_outsl
+
+#define	request_irq	pci_request_irq
+#define	free_irq	pci_free_irq
+
+#define	virt_to_bus	pci_virt_to_bus
+#define	bus_to_virt	pci_bus_to_virt
+
+#define	CONFIG_COMEMPCI	1
+
+
+/*
+ *	Prototypes of the real PCI functions (defined in bios32.c).
+ */
+unsigned char	pci_inb(unsigned int addr);
+unsigned short	pci_inw(unsigned int addr);
+unsigned int	pci_inl(unsigned int addr);
+void		pci_insb(void *addr, void *buf, int len);
+void		pci_insw(void *addr, void *buf, int len);
+void		pci_insl(void *addr, void *buf, int len);
+
+void		pci_outb(unsigned char val, unsigned int addr);
+void		pci_outw(unsigned short val, unsigned int addr);
+void		pci_outl(unsigned int val, unsigned int addr);
+void		pci_outsb(void *addr, void *buf, int len);
+void		pci_outsw(void *addr, void *buf, int len);
+void		pci_outsl(void *addr, void *buf, int len);
+
+int		pci_request_irq(unsigned int irq,
+			void (*handler)(int, void *, struct pt_regs *),
+			unsigned long flags,
+			const char *device,
+			void *dev_id);
+void		pci_free_irq(unsigned int irq, void *dev_id);
+
+void		*pci_bmalloc(int size);
+void		pci_bmfree(void *bmp, int len);
+void		pci_copytoshmem(unsigned long bmp, void *src, int size);
+void		pci_copyfromshmem(void *dst, unsigned long bmp, int size);
+unsigned long	pci_virt_to_bus(volatile void *address);
+void		*pci_bus_to_virt(unsigned long address);
+void		pci_bmcpyto(void *dst, void *src, int len);
+void		pci_bmcpyfrom(void *dst, void *src, int len);
+
+#endif /* CONFIG_PCI */
+/****************************************************************************/
+#endif	/* mcfpci_h */
diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h
new file mode 100644
index 00000000000..f570cf64fd2
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfpit.h
@@ -0,0 +1,64 @@
+/****************************************************************************/
+
+/*
+ *	mcfpit.h -- ColdFire internal PIT timer support defines.
+ *
+ *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	mcfpit_h
+#define	mcfpit_h
+/****************************************************************************/
+
+
+/*
+ *	Get address specific defines for the 5270/5271, 5280/5282, and 5208.
+ */
+#if defined(CONFIG_M520x)
+#define	MCFPIT_BASE1		0x00080000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0x00084000	/* Base address of TIMER2 */
+#else
+#define	MCFPIT_BASE1		0x00150000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0x00160000	/* Base address of TIMER2 */
+#define	MCFPIT_BASE3		0x00170000	/* Base address of TIMER3 */
+#define	MCFPIT_BASE4		0x00180000	/* Base address of TIMER4 */
+#endif
+
+/*
+ *	Define the PIT timer register set addresses.
+ */
+#define	MCFPIT_PCSR		0x0		/* PIT control register */
+#define	MCFPIT_PMR		0x2		/* PIT modulus register */
+#define	MCFPIT_PCNTR		0x4		/* PIT count register */
+
+/*
+ *	Bit definitions for the PIT Control and Status register.
+ */
+#define	MCFPIT_PCSR_CLK1	0x0000		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK2	0x0100		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK4	0x0200		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK8	0x0300		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK16	0x0400		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK32	0x0500		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK64	0x0600		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK128	0x0700		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK256	0x0800		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK512	0x0900		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK1024	0x0a00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK2048	0x0b00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK4096	0x0c00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK8192	0x0d00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK16384	0x0e00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK32768	0x0f00		/* System clock divisor */
+#define	MCFPIT_PCSR_DOZE	0x0040		/* Clock run in doze mode */
+#define	MCFPIT_PCSR_HALTED	0x0020		/* Clock run in halt mode */
+#define	MCFPIT_PCSR_OVW		0x0010		/* Overwrite PIT counter now */
+#define	MCFPIT_PCSR_PIE		0x0008		/* Enable PIT interrupt */
+#define	MCFPIT_PCSR_PIF		0x0004		/* PIT interrupt flag */
+#define	MCFPIT_PCSR_RLD		0x0002		/* Reload counter */
+#define	MCFPIT_PCSR_EN		0x0001		/* Enable PIT */
+#define	MCFPIT_PCSR_DISABLE	0x0000		/* Disable PIT */
+
+/****************************************************************************/
+#endif	/* mcfpit_h */
diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h
new file mode 100644
index 00000000000..da3f2ceff3a
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfsim.h
@@ -0,0 +1,126 @@
+/****************************************************************************/
+
+/*
+ *	mcfsim.h -- ColdFire System Integration Module support.
+ *
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfsim_h
+#define	mcfsim_h
+/****************************************************************************/
+
+
+/*
+ *	Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
+ *	5307 or 5407 specific addresses.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#include <asm/m5206sim.h>
+#elif defined(CONFIG_M520x)
+#include <asm/m520xsim.h>
+#elif defined(CONFIG_M523x)
+#include <asm/m523xsim.h>
+#elif defined(CONFIG_M5249)
+#include <asm/m5249sim.h>
+#elif defined(CONFIG_M527x)
+#include <asm/m527xsim.h>
+#elif defined(CONFIG_M5272)
+#include <asm/m5272sim.h>
+#elif defined(CONFIG_M528x)
+#include <asm/m528xsim.h>
+#elif defined(CONFIG_M5307)
+#include <asm/m5307sim.h>
+#elif defined(CONFIG_M532x)
+#include <asm/m532xsim.h>
+#elif defined(CONFIG_M5407)
+#include <asm/m5407sim.h>
+#endif
+
+
+/*
+ *	Define the base address of the SIM within the MBAR address space.
+ */
+#define	MCFSIM_BASE		0x0		/* Base address of SIM */
+
+
+/*
+ *	Bit definitions for the ICR family of registers.
+ */
+#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
+#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
+#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
+#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
+#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
+#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
+#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
+#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
+#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
+
+#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
+#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
+#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
+#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
+
+/*
+ *	Bit definitions for the Interrupt Mask register (IMR).
+ */
+#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
+#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
+#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
+#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
+#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
+#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
+#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
+
+#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
+#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
+#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
+#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
+#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
+#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
+#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
+#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
+#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
+#endif
+
+/*
+ *	Mask for all of the SIM devices. Some parts have more or less
+ *	SIM devices. This is a catchall for the sandard set.
+ */
+#ifndef MCFSIM_IMR_MASKALL
+#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
+#endif
+
+
+/*
+ *	PIT interrupt settings, if not found in mXXXXsim.h file.
+ */
+#ifndef	ICR_INTRCONF
+#define	ICR_INTRCONF		0x2b            /* PIT1 level 5, priority 3 */
+#endif
+#ifndef	MCFPIT_IMR
+#define	MCFPIT_IMR		MCFINTC_IMRH
+#endif
+#ifndef	MCFPIT_IMR_IBIT
+#define	MCFPIT_IMR_IBIT		(1 << (MCFINT_PIT1 - 32))
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ *	Definition for the interrupt auto-vectoring support.
+ */
+extern void	mcf_autovector(unsigned int vec);
+#endif /* __ASSEMBLY__ */
+
+/****************************************************************************/
+#endif	/* mcfsim_h */
diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h
new file mode 100644
index 00000000000..2d7a4dbd968
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfsmc.h
@@ -0,0 +1,187 @@
+/****************************************************************************/
+
+/*
+ *	mcfsmc.h -- SMC ethernet support for ColdFire environments.
+ *
+ *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfsmc_h
+#define	mcfsmc_h
+/****************************************************************************/
+
+/*
+ *	None of the current ColdFire targets that use the SMC91x111
+ *	allow 8 bit accesses. So this code is 16bit access only.
+ */
+
+
+#undef	outb
+#undef	inb
+#undef	outw
+#undef	outwd
+#undef	inw	
+#undef	outl
+#undef	inl
+
+#undef	outsb
+#undef	outsw
+#undef	outsl
+#undef	insb
+#undef	insw
+#undef	insl
+
+/*
+ *	Re-defines for ColdFire environment... The SMC part is
+ *	mapped into memory space, so remap the PC-style in/out
+ *	routines to handle that.
+ */
+#define	outb	smc_outb
+#define	inb	smc_inb
+#define	outw	smc_outw
+#define	outwd	smc_outwd
+#define	inw	smc_inw
+#define	outl	smc_outl
+#define	inl	smc_inl
+
+#define	outsb	smc_outsb
+#define	outsw	smc_outsw
+#define	outsl	smc_outsl
+#define	insb	smc_insb
+#define	insw	smc_insw
+#define	insl	smc_insl
+
+
+static inline int smc_inb(unsigned int addr)
+{
+	register unsigned short	w;
+	w = *((volatile unsigned short *) (addr & ~0x1));
+	return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
+}
+
+static inline void smc_outw(unsigned int val, unsigned int addr)
+{
+	*((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
+}
+
+static inline int smc_inw(unsigned int addr)
+{
+	register unsigned short	w;
+	w = *((volatile unsigned short *) addr);
+	return(((w << 8) | (w >> 8)) & 0xffff);
+}
+
+static inline void smc_outl(unsigned long val, unsigned int addr)
+{
+	*((volatile unsigned long *) addr) = 
+		((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
+		((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
+}
+
+static inline void smc_outwd(unsigned int val, unsigned int addr)
+{
+	*((volatile unsigned short *) addr) = val;
+}
+
+
+/*
+ *	The rep* functions are used to feed the data port with
+ *	raw data. So we do not byte swap them when copying.
+ */
+
+static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+
+	/* Copy as words for as long as possible */
+	for (ebuf = buf + (len >> 1); (buf < ebuf); )
+		*buf++ = *rp;
+
+	/* Lastly, handle left over byte */
+	if (len & 0x1)
+		*((unsigned char *) buf) = (*rp >> 8) & 0xff;
+}
+
+static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*buf++ = *rp;
+}
+
+static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp;
+	unsigned long		*buf, *ebuf;
+
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*buf++ = *rp;
+}
+
+static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*rp = *buf++;
+}
+
+static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp;
+	unsigned long		*buf, *ebuf;
+
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*rp = *buf++;
+}
+
+
+#ifdef CONFIG_NETtel
+/*
+ *	Re-map the address space of at least one of the SMC ethernet
+ *	parts. Both parts power up decoding the same address, so we
+ *	need to move one of them first, before doing enything else.
+ *
+ *	We also increase the number of wait states for this part by one.
+ */
+
+void smc_remap(unsigned int ioaddr)
+{
+	static int		once = 0;
+	extern unsigned short	ppdata;
+	if (once++ == 0) {
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+		ppdata |= 0x0080;
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+		outw(0x0001, ioaddr + BANK_SELECT);
+		outw(0x0001, ioaddr + BANK_SELECT);
+		outw(0x0067, ioaddr + BASE);
+
+		ppdata &= ~0x0080;
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+	}
+	
+	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
+}
+
+#endif
+
+/****************************************************************************/
+#endif	/* mcfsmc_h */
diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h
new file mode 100644
index 00000000000..0f90f6d2227
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcftimer.h
@@ -0,0 +1,80 @@
+/****************************************************************************/
+
+/*
+ *	mcftimer.h -- ColdFire internal TIMER support defines.
+ *
+ *	(C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcftimer_h
+#define	mcftimer_h
+/****************************************************************************/
+
+
+/*
+ *	Get address specific defines for this ColdFire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define	MCFTIMER_BASE1		0x100		/* Base address of TIMER1 */
+#define	MCFTIMER_BASE2		0x120		/* Base address of TIMER2 */
+#elif defined(CONFIG_M5272)
+#define MCFTIMER_BASE1		0x200           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0x220           /* Base address of TIMER2 */
+#define MCFTIMER_BASE3		0x240           /* Base address of TIMER4 */
+#define MCFTIMER_BASE4		0x260           /* Base address of TIMER3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFTIMER_BASE1		0x140           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0x180           /* Base address of TIMER2 */
+#elif defined(CONFIG_M532x)
+#define MCFTIMER_BASE1		0xfc070000	/* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0xfc074000	/* Base address of TIMER2 */
+#define MCFTIMER_BASE3		0xfc078000	/* Base address of TIMER3 */
+#define MCFTIMER_BASE4		0xfc07c000	/* Base address of TIMER4 */
+#endif
+
+
+/*
+ *	Define the TIMER register set addresses.
+ */
+#define	MCFTIMER_TMR		0x00		/* Timer Mode reg (r/w) */
+#define	MCFTIMER_TRR		0x04		/* Timer Reference (r/w) */
+#define	MCFTIMER_TCR		0x08		/* Timer Capture reg (r/w) */
+#define	MCFTIMER_TCN		0x0C		/* Timer Counter reg (r/w) */
+#if defined(CONFIG_M532x)
+#define	MCFTIMER_TER		0x03		/* Timer Event reg (r/w) */
+#else
+#define	MCFTIMER_TER		0x11		/* Timer Event reg (r/w) */
+#endif
+
+/*
+ *	Bit definitions for the Timer Mode Register (TMR).
+ *	Register bit flags are common accross ColdFires.
+ */
+#define	MCFTIMER_TMR_PREMASK	0xff00		/* Prescalar mask */
+#define	MCFTIMER_TMR_DISCE	0x0000		/* Disable capture */
+#define	MCFTIMER_TMR_ANYCE	0x00c0		/* Capture any edge */
+#define	MCFTIMER_TMR_FALLCE	0x0080		/* Capture fallingedge */
+#define	MCFTIMER_TMR_RISECE	0x0040		/* Capture rising edge */
+#define	MCFTIMER_TMR_ENOM	0x0020		/* Enable output toggle */
+#define	MCFTIMER_TMR_DISOM	0x0000		/* Do single output pulse  */
+#define	MCFTIMER_TMR_ENORI	0x0010		/* Enable ref interrupt */
+#define	MCFTIMER_TMR_DISORI	0x0000		/* Disable ref interrupt */
+#define	MCFTIMER_TMR_RESTART	0x0008		/* Restart counter */
+#define	MCFTIMER_TMR_FREERUN	0x0000		/* Free running counter */
+#define	MCFTIMER_TMR_CLKTIN	0x0006		/* Input clock is TIN */
+#define	MCFTIMER_TMR_CLK16	0x0004		/* Input clock is /16 */
+#define	MCFTIMER_TMR_CLK1	0x0002		/* Input clock is /1 */
+#define	MCFTIMER_TMR_CLKSTOP	0x0000		/* Stop counter */
+#define	MCFTIMER_TMR_ENABLE	0x0001		/* Enable timer */
+#define	MCFTIMER_TMR_DISABLE	0x0000		/* Disable timer */
+
+/*
+ *	Bit definitions for the Timer Event Registers (TER).
+ */
+#define	MCFTIMER_TER_CAP	0x01		/* Capture event */
+#define	MCFTIMER_TER_REF	0x02		/* Refernece event */
+
+/****************************************************************************/
+#endif	/* mcftimer_h */
diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h
new file mode 100644
index 00000000000..ef229387361
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfuart.h
@@ -0,0 +1,216 @@
+/****************************************************************************/
+
+/*
+ *	mcfuart.h -- ColdFire internal UART support defines.
+ *
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfuart_h
+#define	mcfuart_h
+/****************************************************************************/
+
+/*
+ *	Define the base address of the UARTS within the MBAR address
+ *	space.
+ */
+#if defined(CONFIG_M5272)
+#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_NETtel)
+#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#else
+#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x240           /* Base address of UART2 */
+#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
+#else
+#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M520x)
+#define MCFUART_BASE1		0x60000		/* Base address of UART1 */
+#define MCFUART_BASE2		0x64000		/* Base address of UART2 */
+#define MCFUART_BASE3		0x68000		/* Base address of UART2 */
+#elif defined(CONFIG_M532x)
+#define MCFUART_BASE1		0xfc060000	/* Base address of UART1 */
+#define MCFUART_BASE2		0xfc064000	/* Base address of UART2 */
+#define MCFUART_BASE3		0xfc068000	/* Base address of UART3 */
+#endif
+
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+struct mcf_platform_uart {
+	unsigned long	mapbase;	/* Physical address base */
+	void __iomem	*membase;	/* Virtual address if mapped */
+	unsigned int	irq;		/* Interrupt vector */
+	unsigned int	uartclk;	/* UART clock rate */
+};
+
+/*
+ *	Define the ColdFire UART register set addresses.
+ */
+#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
+#define	MCFUART_USR		0x04		/* Status register (r) */
+#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
+#define	MCFUART_UCR		0x08		/* Command register (w) */
+#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
+#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
+#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
+#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
+#define	MCFUART_UISR		0x14		/* Interrupt Status (r) */
+#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
+#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
+#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
+#ifdef	CONFIG_M5272
+#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
+#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
+#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
+#else
+#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
+#endif
+#define	MCFUART_UIPR		0x34		/* Input Port (r) */
+#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
+#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
+
+
+/*
+ *	Define bit flags in Mode Register 1 (MR1).
+ */
+#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
+#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
+#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
+#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
+#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
+
+#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
+#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
+#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
+#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
+#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
+
+#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
+#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
+#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
+#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
+
+/*
+ *	Define bit flags in Mode Register 2 (MR2).
+ */
+#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
+#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
+#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
+#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
+#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
+
+#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
+#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
+#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
+
+/*
+ *	Define bit flags in Status Register (USR).
+ */
+#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
+#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
+#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
+#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
+#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
+#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
+#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
+#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
+
+#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+
+/*
+ *	Define bit flags in Clock Select Register (UCSR).
+ */
+#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
+#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
+#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
+
+#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
+#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
+#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
+
+/*
+ *	Define bit flags in Command Register (UCR).
+ */
+#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
+#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
+#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
+#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
+#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
+#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
+#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
+#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
+
+#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
+#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
+#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
+#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
+#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
+#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
+
+/*
+ *	Define bit flags in Input Port Change Register (UIPCR).
+ */
+#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
+#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
+
+/*
+ *	Define bit flags in Input Port Register (UIP).
+ */
+#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
+
+/*
+ *	Define bit flags in Output Port Registers (UOP).
+ *	Clear bit by writing to UOP0, set by writing to UOP1.
+ */
+#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
+
+/*
+ *	Define bit flags in the Auxiliary Control Register (UACR).
+ */
+#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
+
+/*
+ *	Define bit flags in Interrupt Status Register (UISR).
+ *	These same bits are used for the Interrupt Mask Register (UIMR).
+ */
+#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
+#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
+#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
+#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
+
+#ifdef	CONFIG_M5272
+/*
+ *	Define bit flags in the Transmitter FIFO Register (UTF).
+ */
+#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
+#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
+#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
+
+/*
+ *	Define bit flags in the Receiver FIFO Register (URF).
+ */
+#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
+#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
+#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
+#endif
+
+/****************************************************************************/
+#endif	/* mcfuart_h */
diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h
new file mode 100644
index 00000000000..27f70e45d70
--- /dev/null
+++ b/arch/m68knommu/include/asm/mcfwdebug.h
@@ -0,0 +1,118 @@
+/****************************************************************************/
+
+/*
+ *	mcfdebug.h -- ColdFire Debug Module support.
+ *
+ * 	(C) Copyright 2001, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfdebug_h
+#define mcfdebug_h
+/****************************************************************************/
+
+/* Define the debug module registers */
+#define MCFDEBUG_CSR	0x0			/* Configuration status		*/
+#define MCFDEBUG_BAAR	0x5			/* BDM address attribute	*/
+#define MCFDEBUG_AATR	0x6			/* Address attribute trigger	*/
+#define MCFDEBUG_TDR	0x7			/* Trigger definition		*/
+#define MCFDEBUG_PBR	0x8			/* PC breakpoint		*/
+#define MCFDEBUG_PBMR	0x9			/* PC breakpoint mask		*/
+#define MCFDEBUG_ABHR	0xc			/* High address breakpoint	*/
+#define MCFDEBUG_ABLR	0xd			/* Low address breakpoint	*/
+#define MCFDEBUG_DBR	0xe			/* Data breakpoint		*/
+#define MCFDEBUG_DBMR	0xf			/* Data breakpoint mask		*/
+
+/* Define some handy constants for the trigger definition register */
+#define MCFDEBUG_TDR_TRC_DISP	0x00000000	/* display on DDATA only	*/
+#define MCFDEBUG_TDR_TRC_HALT	0x40000000	/* Processor halt on BP		*/
+#define MCFDEBUG_TDR_TRC_INTR	0x80000000	/* Debug intr on BP		*/
+#define MCFDEBUG_TDR_LXT1	0x00004000	/* TDR level 1			*/
+#define MCFDEBUG_TDR_LXT2	0x00008000	/* TDR level 2			*/
+#define MCFDEBUG_TDR_EBL1	0x00002000	/* Enable breakpoint level 1	*/
+#define MCFDEBUG_TDR_EBL2	0x20000000	/* Enable breakpoint level 2	*/
+#define MCFDEBUG_TDR_EDLW1	0x00001000	/* Enable data BP longword	*/
+#define MCFDEBUG_TDR_EDLW2	0x10000000
+#define MCFDEBUG_TDR_EDWL1	0x00000800	/* Enable data BP lower word	*/
+#define MCFDEBUG_TDR_EDWL2	0x08000000
+#define MCFDEBUG_TDR_EDWU1	0x00000400	/* Enable data BP upper word	*/
+#define MCFDEBUG_TDR_EDWU2	0x04000000
+#define MCFDEBUG_TDR_EDLL1	0x00000200	/* Enable data BP low low byte	*/
+#define MCFDEBUG_TDR_EDLL2	0x02000000
+#define MCFDEBUG_TDR_EDLM1	0x00000100	/* Enable data BP low mid byte	*/
+#define MCFDEBUG_TDR_EDLM2	0x01000000
+#define MCFDEBUG_TDR_EDUM1	0x00000080	/* Enable data BP up mid byte	*/
+#define MCFDEBUG_TDR_EDUM2	0x00800000
+#define MCFDEBUG_TDR_EDUU1	0x00000040	/* Enable data BP up up byte	*/
+#define MCFDEBUG_TDR_EDUU2	0x00400000
+#define MCFDEBUG_TDR_DI1	0x00000020	/* Data BP invert		*/
+#define MCFDEBUG_TDR_DI2	0x00200000
+#define MCFDEBUG_TDR_EAI1	0x00000010	/* Enable address BP inverted	*/
+#define MCFDEBUG_TDR_EAI2	0x00100000
+#define MCFDEBUG_TDR_EAR1	0x00000008	/* Enable address BP range	*/
+#define MCFDEBUG_TDR_EAR2	0x00080000
+#define MCFDEBUG_TDR_EAL1	0x00000004	/* Enable address BP low	*/
+#define MCFDEBUG_TDR_EAL2	0x00040000
+#define MCFDEBUG_TDR_EPC1	0x00000002	/* Enable PC BP			*/
+#define MCFDEBUG_TDR_EPC2	0x00020000
+#define MCFDEBUG_TDR_PCI1	0x00000001	/* PC BP invert			*/
+#define MCFDEBUG_TDR_PCI2	0x00010000
+
+/* Constants for the address attribute trigger register */
+#define MCFDEBUG_AAR_RESET	0x00000005
+/* Fields not yet implemented */
+
+/* And some definitions for the writable sections of the CSR */
+#define MCFDEBUG_CSR_RESET	0x00100000
+#define MCFDEBUG_CSR_PSTCLK	0x00020000	/* PSTCLK disable		*/
+#define MCFDEBUG_CSR_IPW	0x00010000	/* Inhibit processor writes	*/
+#define MCFDEBUG_CSR_MAP	0x00008000	/* Processor refs in emul mode	*/
+#define MCFDEBUG_CSR_TRC	0x00004000	/* Emul mode on trace exception	*/
+#define MCFDEBUG_CSR_EMU	0x00002000	/* Force emulation mode		*/
+#define MCFDEBUG_CSR_DDC_READ	0x00000800	/* Debug data control		*/
+#define MCFDEBUG_CSR_DDC_WRITE	0x00001000
+#define MCFDEBUG_CSR_UHE	0x00000400	/* User mode halt enable	*/
+#define MCFDEBUG_CSR_BTB0	0x00000000	/* Branch target 0 bytes	*/
+#define MCFDEBUG_CSR_BTB2	0x00000100	/* Branch target 2 bytes	*/
+#define MCFDEBUG_CSR_BTB3	0x00000200	/* Branch target 3 bytes	*/
+#define MCFDEBUG_CSR_BTB4	0x00000300	/* Branch target 4 bytes	*/
+#define MCFDEBUG_CSR_NPL	0x00000040	/* Non-pipelined mode		*/
+#define MCFDEBUG_CSR_SSM	0x00000010	/* Single step mode		*/
+
+/* Constants for the BDM address attribute register */
+#define MCFDEBUG_BAAR_RESET	0x00000005
+/* Fields not yet implemented */
+
+
+/* This routine wrappers up the wdebug asm instruction so that the register
+ * and value can be relatively easily specified.  The biggest hassle here is
+ * that the debug module instructions (2 longs) must be long word aligned and
+ * some pointer fiddling is performed to ensure this.
+ */
+static inline void wdebug(int reg, unsigned long data) {
+	unsigned short dbg_spc[6];
+	unsigned short *dbg;
+
+	// Force alignment to long word boundary
+	dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
+
+	// Build up the debug instruction
+	dbg[0] = 0x2c80 | (reg & 0xf);
+	dbg[1] = (data >> 16) & 0xffff;
+	dbg[2] = data & 0xffff;
+	dbg[3] = 0;
+
+	// Perform the wdebug instruction
+#if 0
+	// This strain is for gas which doesn't have the wdebug instructions defined
+	asm(	"move.l	%0, %%a0\n\t"
+		".word	0xfbd0\n\t"
+		".word	0x0003\n\t"
+	    :: "g" (dbg) : "a0");
+#else
+	// And this is for when it does
+	asm(	"wdebug	(%0)" :: "a" (dbg));
+#endif
+}
+
+#endif
diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h
new file mode 100644
index 00000000000..d810c78de5f
--- /dev/null
+++ b/arch/m68knommu/include/asm/md.h
@@ -0,0 +1 @@
+#include <asm-m68k/md.h>
diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h
new file mode 100644
index 00000000000..4846c682efe
--- /dev/null
+++ b/arch/m68knommu/include/asm/mman.h
@@ -0,0 +1 @@
+#include <asm-m68k/mman.h>
diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68knommu/include/asm/mmu.h
new file mode 100644
index 00000000000..5fa6b68353b
--- /dev/null
+++ b/arch/m68knommu/include/asm/mmu.h
@@ -0,0 +1,11 @@
+#ifndef __M68KNOMMU_MMU_H
+#define __M68KNOMMU_MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#endif /* __M68KNOMMU_MMU_H */
diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h
new file mode 100644
index 00000000000..9ccee4278c9
--- /dev/null
+++ b/arch/m68knommu/include/asm/mmu_context.h
@@ -0,0 +1,33 @@
+#ifndef __M68KNOMMU_MMU_CONTEXT_H
+#define __M68KNOMMU_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	// mm->context = virt_to_phys(mm->pgd);
+	return(0);
+}
+
+#define destroy_context(mm)		do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif
diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68knommu/include/asm/module.h
new file mode 100644
index 00000000000..2e45ab50b23
--- /dev/null
+++ b/arch/m68knommu/include/asm/module.h
@@ -0,0 +1,11 @@
+#ifndef ASM_M68KNOMMU_MODULE_H
+#define ASM_M68KNOMMU_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif /* ASM_M68KNOMMU_MODULE_H */
diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h
new file mode 100644
index 00000000000..81a16779e83
--- /dev/null
+++ b/arch/m68knommu/include/asm/movs.h
@@ -0,0 +1 @@
+#include <asm-m68k/movs.h>
diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h
new file mode 100644
index 00000000000..bdfadec4d52
--- /dev/null
+++ b/arch/m68knommu/include/asm/msgbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/msgbuf.h>
diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68knommu/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/m68knommu/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68knommu/include/asm/nettel.h
new file mode 100644
index 00000000000..0299f6a2dee
--- /dev/null
+++ b/arch/m68knommu/include/asm/nettel.h
@@ -0,0 +1,108 @@
+/****************************************************************************/
+
+/*
+ *	nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
+ *
+ *	(C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
+ * 	(C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) 
+ * 	(C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) 
+ */
+
+/****************************************************************************/
+#ifndef	nettel_h
+#define	nettel_h
+/****************************************************************************/
+
+
+/****************************************************************************/
+#ifdef CONFIG_NETtel
+/****************************************************************************/
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif
+
+/*---------------------------------------------------------------------------*/
+#if defined(CONFIG_M5307)
+/*
+ *	NETtel/5307 based hardware first. DTR/DCD lines are wired to
+ *	GPIO lines. Most of the LED's are driver through a latch
+ *	connected to CS2.
+ */
+#define	MCFPP_DCD1	0x0001
+#define	MCFPP_DCD0	0x0002
+#define	MCFPP_DTR1	0x0004
+#define	MCFPP_DTR0	0x0008
+
+#define	NETtel_LEDADDR	0x30400000
+
+#ifndef __ASSEMBLY__
+
+extern volatile unsigned short ppdata;
+
+/*
+ *	These functions defined to give quasi generic access to the
+ *	PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	ppdata = (ppdata & ~mask) | bits;
+	*pp = ppdata;
+}
+#endif
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5206e)
+/*
+ *	NETtel/5206e based hardware has leds on latch on CS3.
+ *	No support modem for lines??
+ */
+#define	NETtel_LEDADDR	0x50000000
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5272)
+/*
+ *	NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
+ */
+#define	MCFPP_DCD0	0x0080
+#define	MCFPP_DCD1	0x0000		/* Port 1 no DCD support */
+#define	MCFPP_DTR0	0x0040
+#define	MCFPP_DTR1	0x0000		/* Port 1 no DTR support */
+
+#ifndef __ASSEMBLY__
+/*
+ *	These functions defined to give quasi generic access to the
+ *	PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+	return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+	*pp = (*pp & ~mask) | bits;
+}
+#endif
+
+#endif
+/*---------------------------------------------------------------------------*/
+
+/****************************************************************************/
+#endif /* CONFIG_NETtel */
+/****************************************************************************/
+#endif	/* nettel_h */
diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h
new file mode 100644
index 00000000000..fdba7953ff9
--- /dev/null
+++ b/arch/m68knommu/include/asm/openprom.h
@@ -0,0 +1 @@
+#include <asm-m68k/openprom.h>
diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h
new file mode 100644
index 00000000000..ce079dc332d
--- /dev/null
+++ b/arch/m68knommu/include/asm/oplib.h
@@ -0,0 +1 @@
+#include <asm-m68k/oplib.h>
diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68knommu/include/asm/page.h
new file mode 100644
index 00000000000..3a1ede4544c
--- /dev/null
+++ b/arch/m68knommu/include/asm/page.h
@@ -0,0 +1,77 @@
+#ifndef _M68KNOMMU_PAGE_H
+#define _M68KNOMMU_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	(12)
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+ 
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr)		virt_to_phys((void *)(vaddr))
+#define __va(paddr)		phys_to_virt((unsigned long)(paddr))
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn)	        ((pfn) < max_mapnr)
+
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/page.h>
+
+#endif /* _M68KNOMMU_PAGE_H */
diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68knommu/include/asm/page_offset.h
new file mode 100644
index 00000000000..d4e73e0ba64
--- /dev/null
+++ b/arch/m68knommu/include/asm/page_offset.h
@@ -0,0 +1,5 @@
+
+
+/* This handles the memory map.. */
+#define	PAGE_OFFSET_RAW		CONFIG_RAMBASE
+
diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68knommu/include/asm/param.h
new file mode 100644
index 00000000000..6044397adb6
--- /dev/null
+++ b/arch/m68knommu/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _M68KNOMMU_PARAM_H
+#define _M68KNOMMU_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define	USER_HZ		HZ
+#define	CLOCKS_PER_SEC	(USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ	100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _M68KNOMMU_PARAM_H */
diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68knommu/include/asm/pci.h
new file mode 100644
index 00000000000..a13f3cc8745
--- /dev/null
+++ b/arch/m68knommu/include/asm/pci.h
@@ -0,0 +1,29 @@
+#ifndef M68KNOMMU_PCI_H
+#define	M68KNOMMU_PCI_H
+
+#include <asm-m68k/pci.h>
+
+#ifdef CONFIG_COMEMPCI
+/*
+ *	These are pretty much arbitary with the CoMEM implementation.
+ *	We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO		0x100
+#define PCIBIOS_MIN_MEM		0x00010000
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return 1;
+}
+
+#endif /* CONFIG_COMEMPCI */
+
+#endif /* M68KNOMMU_PCI_H */
diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h
new file mode 100644
index 00000000000..5de72c327ef
--- /dev/null
+++ b/arch/m68knommu/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_M68KNOMMU_PERCPU__
+#define __ARCH_M68KNOMMU_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_M68KNOMMU_PERCPU__ */
diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h
new file mode 100644
index 00000000000..d6352f671ec
--- /dev/null
+++ b/arch/m68knommu/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef _M68KNOMMU_PGALLOC_H
+#define _M68KNOMMU_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _M68KNOMMU_PGALLOC_H */
diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68knommu/include/asm/pgtable.h
new file mode 100644
index 00000000000..46251016e82
--- /dev/null
+++ b/arch/m68knommu/include/asm/pgtable.h
@@ -0,0 +1,70 @@
+#ifndef _M68KNOMMU_PGTABLE_H
+#define _M68KNOMMU_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *)0)
+
+#define PAGE_NONE	__pgprot(0)
+#define PAGE_SHARED	__pgprot(0)
+#define PAGE_COPY	__pgprot(0)
+#define PAGE_READONLY	__pgprot(0)
+#define PAGE_KERNEL	__pgprot(0)
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h
new file mode 100644
index 00000000000..ee1b6cb549c
--- /dev/null
+++ b/arch/m68knommu/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-m68k/poll.h>
diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h
new file mode 100644
index 00000000000..6205fb9392a
--- /dev/null
+++ b/arch/m68knommu/include/asm/posix_types.h
@@ -0,0 +1 @@
+#include <asm-m68k/posix_types.h>
diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68knommu/include/asm/processor.h
new file mode 100644
index 00000000000..91cba18acdd
--- /dev/null
+++ b/arch/m68knommu/include/asm/processor.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm-m68knommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	return(sw_usp);
+#else
+  	unsigned long usp;
+	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+	return usp;
+#endif
+}
+
+static inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	sw_usp = usp;
+#else
+	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	(0xF0000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE	0
+
+/* 
+ * if you change this structure, you must change the code and offsets
+ * in m68k/machasm.S
+ */
+   
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned short sr;		/* saved status register */
+	unsigned short fs;		/* saved fs (sfc, dfc) */
+	unsigned long  crp[2];		/* cpu root pointer */
+	unsigned long  esp0;		/* points to SR of stack frame */
+	unsigned long  fp[8*3];
+	unsigned long  fpcntl[3];	/* fp control regs */
+	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+};
+
+#define INIT_THREAD  { \
+	sizeof(init_stack) + (unsigned long) init_stack, 0, \
+	PS_S, __KERNEL_DS, \
+	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+}
+
+/*
+ * Coldfire stacks need to be re-aligned on trap exit, conventional
+ * 68k can handle this case cleanly.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define	reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
+#else
+#define	reformat(_regs)		do { } while (0)
+#endif
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp)			\
+do {							\
+	set_fs(USER_DS); /* reads from user space */	\
+	(_regs)->pc = (_pc);				\
+	((struct switch_stack *)(_regs))[-1].a6 = 0;	\
+	reformat(_regs);				\
+	if (current->mm)				\
+		(_regs)->d5 = current->mm->start_data;	\
+	(_regs)->sr &= ~0x2000;				\
+	wrusp(_usp);					\
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    (virt_addr_valid((tsk)->thread.esp0))) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    barrier()
+
+#endif
diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68knommu/include/asm/ptrace.h
new file mode 100644
index 00000000000..8c9194b9854
--- /dev/null
+++ b/arch/m68knommu/include/asm/ptrace.h
@@ -0,0 +1,87 @@
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1	   0
+#define PT_D2	   1
+#define PT_D3	   2
+#define PT_D4	   3
+#define PT_D5	   4
+#define PT_D6	   5
+#define PT_D7	   6
+#define PT_A0	   7
+#define PT_A1	   8
+#define PT_A2	   9
+#define PT_A3	   10
+#define PT_A4	   11
+#define PT_A5	   12
+#define PT_A6	   13
+#define PT_D0	   14
+#define PT_USP	   15
+#define PT_ORIG_D0 16
+#define PT_SR	   17
+#define PT_PC	   18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+#ifdef CONFIG_COLDFIRE
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+  unsigned short sr;
+  unsigned long  pc;
+#else
+  unsigned short sr;
+  unsigned long  pc;
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long  d6;
+	unsigned long  d7;
+	unsigned long  a3;
+	unsigned long  a4;
+	unsigned long  a5;
+	unsigned long  a6;
+	unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h
new file mode 100644
index 00000000000..c3636932d4b
--- /dev/null
+++ b/arch/m68knommu/include/asm/quicc_simple.h
@@ -0,0 +1,52 @@
+/***********************************
+ * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Simple drivers common header
+ ***************************************
+ */
+
+#ifndef __SIMPLE_H
+#define __SIMPLE_H
+
+/* #include "quicc.h" */
+
+#define GLB_SCC_0   0
+#define GLB_SCC_1   1
+#define GLB_SCC_2   2
+#define GLB_SCC_3   3
+
+typedef void (int_routine)(unsigned short interrupt_event);
+typedef int_routine *int_routine_ptr; 
+typedef void *(alloc_routine)(int length);
+typedef void (free_routine)(int scc_num, int channel_num, void *buf);
+typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
+typedef int  (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
+typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
+typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
+
+/* user defined functions for global errors */
+typedef void (handle_glob_overrun_routine)(int scc_number);
+typedef void (handle_glob_underrun_routine)(int scc_number);
+typedef void (glob_intr_q_overflow_routine)(int scc_number);
+
+/*
+ * General initialization and command routines
+ */
+void quicc_issue_cmd (unsigned short cmd, int scc_num);
+void quicc_init(void);
+void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_scc_start(int scc_num);
+void quicc_scc_loopback(int scc_num);
+
+/* Interrupt enable/disable routines for critical pieces of code*/
+unsigned short  IntrDis(void);
+void            IntrEna(unsigned short old_sr);
+
+/* For debugging */
+void print_rbd(int scc_num);
+void print_tbd(int scc_num);
+
+#endif
diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h
new file mode 100644
index 00000000000..7fa63d5ea57
--- /dev/null
+++ b/arch/m68knommu/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-m68k/resource.h>
diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h
new file mode 100644
index 00000000000..eaf18ec83c8
--- /dev/null
+++ b/arch/m68knommu/include/asm/rtc.h
@@ -0,0 +1 @@
+#include <asm-m68k/rtc.h>
diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h
new file mode 100644
index 00000000000..afc4788b0d2
--- /dev/null
+++ b/arch/m68knommu/include/asm/scatterlist.h
@@ -0,0 +1,22 @@
+#ifndef _M68KNOMMU_SCATTERLIST_H
+#define _M68KNOMMU_SCATTERLIST_H
+
+#include <linux/mm.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#define ISA_DMA_THRESHOLD	(0xffffffff)
+
+#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h
new file mode 100644
index 00000000000..dd0ecb98ec0
--- /dev/null
+++ b/arch/m68knommu/include/asm/sections.h
@@ -0,0 +1,7 @@
+#ifndef _M68KNOMMU_SECTIONS_H
+#define _M68KNOMMU_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68knommu/include/asm/segment.h
new file mode 100644
index 00000000000..42318ebec7e
--- /dev/null
+++ b/arch/m68knommu/include/asm/segment.h
@@ -0,0 +1,51 @@
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE     (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define USER_DS		MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+    return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h
new file mode 100644
index 00000000000..3a634f9ecf5
--- /dev/null
+++ b/arch/m68knommu/include/asm/sembuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/sembuf.h>
diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68knommu/include/asm/setup.h
new file mode 100644
index 00000000000..fb86bb2a607
--- /dev/null
+++ b/arch/m68knommu/include/asm/setup.h
@@ -0,0 +1,10 @@
+#ifdef __KERNEL__
+
+#include <asm-m68k/setup.h>
+
+/* We have a bigger command line buffer. */
+#undef COMMAND_LINE_SIZE
+
+#endif  /*  __KERNEL__  */
+
+#define COMMAND_LINE_SIZE	512
diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h
new file mode 100644
index 00000000000..cc8e522d905
--- /dev/null
+++ b/arch/m68knommu/include/asm/shm.h
@@ -0,0 +1 @@
+#include <asm-m68k/shm.h>
diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h
new file mode 100644
index 00000000000..bc34cf8eefc
--- /dev/null
+++ b/arch/m68knommu/include/asm/shmbuf.h
@@ -0,0 +1 @@
+#include <asm-m68k/shmbuf.h>
diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h
new file mode 100644
index 00000000000..d7ee69648eb
--- /dev/null
+++ b/arch/m68knommu/include/asm/shmparam.h
@@ -0,0 +1 @@
+#include <asm-m68k/shmparam.h>
diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h
new file mode 100644
index 00000000000..36c293fc133
--- /dev/null
+++ b/arch/m68knommu/include/asm/sigcontext.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
+#define _ASM_M68KNOMMU_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long  sc_mask; 	/* old sigmask */
+	unsigned long  sc_usp;		/* old user stack pointer */
+	unsigned long  sc_d0;
+	unsigned long  sc_d1;
+	unsigned long  sc_a0;
+	unsigned long  sc_a1;
+	unsigned long  sc_a5;
+	unsigned short sc_sr;
+	unsigned long  sc_pc;
+	unsigned short sc_formatvec;
+};
+
+#endif
diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68knommu/include/asm/siginfo.h
new file mode 100644
index 00000000000..b18e5f4064a
--- /dev/null
+++ b/arch/m68knommu/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _M68KNOMMU_SIGINFO_H
+#define _M68KNOMMU_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68knommu/include/asm/signal.h
new file mode 100644
index 00000000000..216c08be54a
--- /dev/null
+++ b/arch/m68knommu/include/asm/signal.h
@@ -0,0 +1,159 @@
+#ifndef _M68KNOMMU_SIGNAL_H
+#define _M68KNOMMU_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_SIGNAL_H */
diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68knommu/include/asm/smp.h
new file mode 100644
index 00000000000..9e9bd7e5892
--- /dev/null
+++ b/arch/m68knommu/include/asm/smp.h
@@ -0,0 +1 @@
+/* nothing required here yet */
diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h
new file mode 100644
index 00000000000..ac5478bf637
--- /dev/null
+++ b/arch/m68knommu/include/asm/socket.h
@@ -0,0 +1 @@
+#include <asm-m68k/socket.h>
diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h
new file mode 100644
index 00000000000..dcc6a8900ce
--- /dev/null
+++ b/arch/m68knommu/include/asm/sockios.h
@@ -0,0 +1 @@
+#include <asm-m68k/sockios.h>
diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h
new file mode 100644
index 00000000000..6bb1f06c478
--- /dev/null
+++ b/arch/m68knommu/include/asm/spinlock.h
@@ -0,0 +1 @@
+#include <asm-m68k/spinlock.h>
diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h
new file mode 100644
index 00000000000..3d4b260e7c0
--- /dev/null
+++ b/arch/m68knommu/include/asm/stat.h
@@ -0,0 +1 @@
+#include <asm-m68k/stat.h>
diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h
new file mode 100644
index 00000000000..2ce99eaf097
--- /dev/null
+++ b/arch/m68knommu/include/asm/statfs.h
@@ -0,0 +1 @@
+#include <asm-m68k/statfs.h>
diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68knommu/include/asm/string.h
new file mode 100644
index 00000000000..af09e17000f
--- /dev/null
+++ b/arch/m68knommu/include/asm/string.h
@@ -0,0 +1,126 @@
+#ifndef _M68KNOMMU_STRING_H_
+#define _M68KNOMMU_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_STRCPY
+static inline char * strcpy(char * dest,const char *src)
+{
+  char *xdest = dest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+        "jne 1b"
+	: "=a" (dest), "=a" (src)
+        : "0" (dest), "1" (src) : "memory");
+  return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char * strncpy(char *dest, const char *src, size_t n)
+{
+  char *xdest = dest;
+
+  if (n == 0)
+    return xdest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+	"jeq 2f\n\t"
+        "subql #1,%2\n\t"
+        "jne 1b\n\t"
+        "2:"
+        : "=a" (dest), "=a" (src), "=d" (n)
+        : "0" (dest), "1" (src), "2" (n)
+        : "memory");
+  return xdest;
+}
+
+
+#ifndef CONFIG_COLDFIRE
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char * cs,const char * ct)
+{
+  char __res;
+
+  __asm__
+       ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
+        "cmpb %1@+,%2\n\t"      /* compare a byte */
+        "jne  2f\n\t"           /* not equal, break out */
+        "tstb %2\n\t"           /* at end of cs? */
+        "jne  1b\n\t"           /* no, keep going */
+        "jra  3f\n\t"		/* strings are equal */
+        "2:\tsubb %1@-,%2\n\t"  /* *cs - *ct */
+        "3:"
+        : "=a" (cs), "=a" (ct), "=d" (__res)
+        : "0" (cs), "1" (ct));
+
+  return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char * cs,const char * ct,size_t count)
+{
+  char __res;
+
+  if (!count)
+    return 0;
+  __asm__
+       ("1:\tmovb %0@+,%3\n\t"          /* get *cs */
+        "cmpb   %1@+,%3\n\t"            /* compare a byte */
+        "jne    3f\n\t"                 /* not equal, break out */
+        "tstb   %3\n\t"                 /* at end of cs? */
+        "jeq    4f\n\t"                 /* yes, all done */
+        "subql  #1,%2\n\t"              /* no, adjust count */
+        "jne    1b\n\t"                 /* more to do, keep going */
+        "2:\tmoveq #0,%3\n\t"           /* strings are equal */
+        "jra    4f\n\t"
+        "3:\tsubb %1@-,%3\n\t"          /* *cs - *ct */
+        "4:"
+        : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
+        : "0" (cs), "1" (ct), "2" (count));
+  return __res;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void * s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *d, const void *s, size_t count);
+
+#else /* KERNEL */
+
+/*
+ *	let user libraries deal with these,
+ *	IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+
+#endif /* _M68K_STRING_H_ */
diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68knommu/include/asm/system.h
new file mode 100644
index 00000000000..40f49de6982
--- /dev/null
+++ b/arch/m68knommu/include/asm/system.h
@@ -0,0 +1,324 @@
+#ifndef _M68KNOMMU_SYSTEM_H
+#define _M68KNOMMU_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.  This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last)				\
+{								\
+  void *_last;							\
+  __asm__ __volatile__(						\
+  	"movel	%1, %%a0\n\t"					\
+	"movel	%2, %%a1\n\t"					\
+	"jbsr resume\n\t"					\
+	"movel	%%d1, %0\n\t"					\
+       : "=d" (_last)						\
+       : "d" (prev), "d" (next)					\
+       : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1");	\
+  (last) = _last;						\
+}
+
+#ifdef CONFIG_COLDFIRE
+#define local_irq_enable() __asm__ __volatile__ (		\
+	"move %/sr,%%d0\n\t"					\
+	"andi.l #0xf8ff,%%d0\n\t"				\
+	"move %%d0,%/sr\n"					\
+	: /* no outputs */					\
+	:							\
+        : "cc", "%d0", "memory")
+#define local_irq_disable() __asm__ __volatile__ (		\
+	"move %/sr,%%d0\n\t"					\
+	"ori.l #0x0700,%%d0\n\t"				\
+	"move %%d0,%/sr\n"					\
+	: /* no outputs */					\
+	:							\
+	: "cc", "%d0", "memory")
+/* For spinlocks etc */
+#define local_irq_save(x) __asm__ __volatile__ (		\
+	"movew %%sr,%0\n\t"					\
+	"movew #0x0700,%%d0\n\t"				\
+	"or.l  %0,%%d0\n\t"					\
+	"movew %%d0,%/sr"					\
+	: "=d" (x)						\
+	:							\
+	: "cc", "%d0", "memory")
+#else
+
+/* portable version */ /* FIXME - see entry.h*/
+#define ALLOWINT 0xf8ff
+
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
+#endif
+
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+/* For spinlocks etc */
+#ifndef local_irq_save
+#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
+#endif
+
+#define	irqs_disabled()			\
+({					\
+	unsigned long flags;		\
+	local_save_flags(flags);	\
+	((flags & 0x0700) == 0x0700);	\
+})
+
+#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop()  asm volatile ("nop"::)
+#define mb()   asm volatile (""   : : :"memory")
+#define rmb()  asm volatile (""   : : :"memory")
+#define wmb()  asm volatile (""   : : :"memory")
+#define set_mb(var, value)	({ (var) = (value); wmb(); })
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define read_barrier_depends()  ((void)0)
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+  unsigned long tmp, flags;
+
+  local_irq_save(flags);
+
+  switch (size) {
+  case 1:
+    __asm__ __volatile__
+    ("moveb %2,%0\n\t"
+     "moveb %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 2:
+    __asm__ __volatile__
+    ("movew %2,%0\n\t"
+     "movew %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 4:
+    __asm__ __volatile__
+    ("movel %2,%0\n\t"
+     "movel %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  }
+  local_irq_restore(flags);
+  return tmp;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+	switch (size) {
+	    case 1:
+		__asm__ __volatile__
+			("moveb %2,%0\n\t"
+			 "1:\n\t"
+			 "casb %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	    case 2:
+		__asm__ __volatile__
+			("movew %2,%0\n\t"
+			 "1:\n\t"
+			 "casw %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	    case 4:
+		__asm__ __volatile__
+			("movel %2,%0\n\t"
+			 "1:\n\t"
+			 "casl %0,%1,%2\n\t"
+			 "jne 1b"
+			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+		break;
+	}
+	return x;
+}
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
+	defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
+#define HARD_RESET_NOW() ({		\
+        local_irq_disable();		\
+        asm("				\
+        moveal #0x10c00000, %a0;	\
+        moveb #0, 0xFFFFF300;		\
+        moveal 0(%a0), %sp;		\
+        moveal 4(%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#endif
+
+#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+/*
+ * Need to account for broken early mask of 5272 silicon. So don't
+ * jump through the original start address. Jump strait into the
+ * known start of the FLASH code.
+ */
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+        jmp 0xf0000400;			\
+        ");				\
+})
+#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+      defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+	moveal #0x10000044, %a0;	\
+	movel #0xffffffff, (%a0);	\
+	moveal #0x10000001, %a0;	\
+	moveb #0x00, (%a0);		\
+        moveal #0xf0000004, %a0;	\
+        moveal (%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#elif defined(CONFIG_M5272)
+/*
+ * Retrieve the boot address in flash using CSBR0 and CSOR0
+ * find the reset vector at flash_address + 4 (e.g. 0x400)
+ * remap it in the flash's current location (e.g. 0xf0000400)
+ * and jump there.
+ */ 
+#define HARD_RESET_NOW() ({		\
+	asm("				\
+	movew #0x2700, %%sr;		\
+	move.l	%0+0x40,%%d0;		\
+	and.l	%0+0x44,%%d0;		\
+	andi.l	#0xfffff000,%%d0;	\
+	mov.l	%%d0,%%a0;		\
+	or.l	4(%%a0),%%d0;		\
+	mov.l	%%d0,%%a0;		\
+	jmp (%%a0);"			\
+	: /* No output */		\
+	: "o" (*(char *)MCF_MBAR) );	\
+})
+#elif defined(CONFIG_M528x)
+/*
+ * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
+ * that when set, resets the MCF528x.
+ */
+#define HARD_RESET_NOW() \
+({						\
+	unsigned char volatile *reset;		\
+	asm("move.w	#0x2700, %sr");		\
+	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));	\
+	while(1)				\
+	*reset |= (0x01 << 7);\
+})
+#elif defined(CONFIG_M523x)
+#define HARD_RESET_NOW() ({		\
+	asm("				\
+	movew #0x2700, %sr;		\
+	movel #0x01000000, %sp;		\
+	moveal #0x40110000, %a0;	\
+	moveb #0x80, (%a0);		\
+	");				\
+})
+#elif defined(CONFIG_M520x)
+	/*
+	 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register 
+	 * RCR), that when set, resets the MCF5208.
+	 */
+#define HARD_RESET_NOW() 		\
+({					\
+	unsigned char volatile *reset;	\
+	asm("move.w     #0x2700, %sr");	\
+	reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000));	\
+	while(1)			\
+		*reset |= 0x80;		\
+})
+#else
+#define HARD_RESET_NOW() ({		\
+        asm("				\
+	movew #0x2700, %sr;		\
+        moveal #0x4, %a0;		\
+        moveal (%a0), %a0;		\
+        jmp (%a0);			\
+        ");				\
+})
+#endif
+#endif
+#define arch_align_stack(x) (x)
+
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	if (flags & 0x0700)
+		return 0;
+	else
+		return 1;
+}
+
+#endif /* _M68KNOMMU_SYSTEM_H */
diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h
new file mode 100644
index 00000000000..05dd6bc2728
--- /dev/null
+++ b/arch/m68knommu/include/asm/termbits.h
@@ -0,0 +1 @@
+#include <asm-m68k/termbits.h>
diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h
new file mode 100644
index 00000000000..e7337881a98
--- /dev/null
+++ b/arch/m68knommu/include/asm/termios.h
@@ -0,0 +1 @@
+#include <asm-m68k/termios.h>
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h
new file mode 100644
index 00000000000..0c9bc095f3f
--- /dev/null
+++ b/arch/m68knommu/include/asm/thread_info.h
@@ -0,0 +1,98 @@
+/* thread_info.h: m68knommu low-level thread information
+ * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+                                                                                
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	unsigned long	   flags;		/* low level flags */
+	int		   cpu;			/* cpu we're on */
+	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
+	struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	__asm__(
+		"move.l	%%sp, %0 \n\t"
+		"and.l	%1, %0"
+		: "=&d"(ti)
+		: "di" (~(THREAD_SIZE-1))
+		);
+	return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define	PREEMPT_ACTIVE	0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		4
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68knommu/include/asm/timex.h
new file mode 100644
index 00000000000..109050f3fe9
--- /dev/null
+++ b/arch/m68knommu/include/asm/timex.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm-m68knommu/timex.h
+ *
+ * m68knommu architecture timex specifications
+ */
+#ifndef _ASM_M68KNOMMU_TIMEX_H
+#define _ASM_M68KNOMMU_TIMEX_H
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#define CLOCK_TICK_RATE	MCF_CLK
+#else
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+#endif
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h
new file mode 100644
index 00000000000..77a7c51ca29
--- /dev/null
+++ b/arch/m68knommu/include/asm/tlb.h
@@ -0,0 +1 @@
+#include <asm-m68k/tlb.h>
diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h
new file mode 100644
index 00000000000..a470cfb803e
--- /dev/null
+++ b/arch/m68knommu/include/asm/tlbflush.h
@@ -0,0 +1,55 @@
+#ifndef _M68KNOMMU_TLBFLUSH_H
+#define _M68KNOMMU_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+				   unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+	BUG();
+}
+
+#endif /* _M68KNOMMU_TLBFLUSH_H */
diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68knommu/include/asm/topology.h
new file mode 100644
index 00000000000..ca173e9f26f
--- /dev/null
+++ b/arch/m68knommu/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_TOPOLOGY_H
+#define _ASM_M68K_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68knommu/include/asm/traps.h
new file mode 100644
index 00000000000..d0671e5f8e2
--- /dev/null
+++ b/arch/m68knommu/include/asm/traps.h
@@ -0,0 +1,154 @@
+/*
+ *  linux/include/asm/traps.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68KNOMMU_TRAPS_H
+#define _M68KNOMMU_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+typedef void (*e_vector)(void);
+
+extern e_vector vectors[];
+extern void init_vectors(void);
+extern void enable_vector(unsigned int irq);
+extern void disable_vector(unsigned int irq);
+extern void ack_vector(unsigned int irq);
+
+#endif
+
+#define VEC_BUSERR  (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK     (6)
+#define VEC_TRAP    (7)
+#define VEC_PRIV    (8)
+#define VEC_TRACE   (9)
+#define VEC_LINE10  (10)
+#define VEC_LINE11  (11)
+#define VEC_RESV1   (12)
+#define VEC_COPROC  (13)
+#define VEC_FORMAT  (14)
+#define VEC_UNINT   (15)
+#define VEC_SPUR    (24)
+#define VEC_INT1    (25)
+#define VEC_INT2    (26)
+#define VEC_INT3    (27)
+#define VEC_INT4    (28)
+#define VEC_INT5    (29)
+#define VEC_INT6    (30)
+#define VEC_INT7    (31)
+#define VEC_SYS     (32)
+#define VEC_TRAP1   (33)
+#define VEC_TRAP2   (34)
+#define VEC_TRAP3   (35)
+#define VEC_TRAP4   (36)
+#define VEC_TRAP5   (37)
+#define VEC_TRAP6   (38)
+#define VEC_TRAP7   (39)
+#define VEC_TRAP8   (40)
+#define VEC_TRAP9   (41)
+#define VEC_TRAP10  (42)
+#define VEC_TRAP11  (43)
+#define VEC_TRAP12  (44)
+#define VEC_TRAP13  (45)
+#define VEC_TRAP14  (46)
+#define VEC_TRAP15  (47)
+#define VEC_FPBRUC  (48)
+#define VEC_FPIR    (49)
+#define VEC_FPDIVZ  (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE    (52)
+#define VEC_FPOVER  (53)
+#define VEC_FPNAN   (54)
+#define VEC_FPUNSUP (55)
+#define	VEC_UNIMPEA (60)
+#define	VEC_UNIMPII (61)
+#define VEC_USER    (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T  (0x8000)
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#define PS_C  (0x0001)
+
+/* structure for stack frames */
+
+struct frame {
+    struct pt_regs ptregs;
+    union {
+	    struct {
+		    unsigned long  iaddr;    /* instruction address */
+	    } fmt2;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+	    } fmt3;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+		    unsigned long  pc;	     /* pc of faulted instr */
+	    } fmt4;
+	    struct {
+		    unsigned long  effaddr;  /* effective address */
+		    unsigned short ssw;      /* special status word */
+		    unsigned short wb3s;     /* write back 3 status */
+		    unsigned short wb2s;     /* write back 2 status */
+		    unsigned short wb1s;     /* write back 1 status */
+		    unsigned long  faddr;    /* fault address */
+		    unsigned long  wb3a;     /* write back 3 address */
+		    unsigned long  wb3d;     /* write back 3 data */
+		    unsigned long  wb2a;     /* write back 2 address */
+		    unsigned long  wb2d;     /* write back 2 data */
+		    unsigned long  wb1a;     /* write back 1 address */
+		    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
+		    unsigned long  pd1;      /* push data 1*/
+		    unsigned long  pd2;      /* push data 2*/
+		    unsigned long  pd3;      /* push data 3*/
+	    } fmt7;
+	    struct {
+		    unsigned long  iaddr;    /* instruction address */
+		    unsigned short int1[4];  /* internal registers */
+	    } fmt9;
+	    struct {
+		    unsigned short int1;
+		    unsigned short ssw;      /* special status word */
+		    unsigned short isc;      /* instruction stage c */
+		    unsigned short isb;      /* instruction stage b */
+		    unsigned long  daddr;    /* data cycle fault address */
+		    unsigned short int2[2];
+		    unsigned long  dobuf;    /* data cycle output buffer */
+		    unsigned short int3[2];
+	    } fmta;
+	    struct {
+		    unsigned short int1;
+		    unsigned short ssw;     /* special status word */
+		    unsigned short isc;     /* instruction stage c */
+		    unsigned short isb;     /* instruction stage b */
+		    unsigned long  daddr;   /* data cycle fault address */
+		    unsigned short int2[2];
+		    unsigned long  dobuf;   /* data cycle output buffer */
+		    unsigned short int3[4];
+		    unsigned long  baddr;   /* stage B address */
+		    unsigned short int4[2];
+		    unsigned long  dibuf;   /* data cycle input buffer */
+		    unsigned short int5[3];
+		    unsigned	   ver : 4; /* stack frame version # */
+		    unsigned	   int6:12;
+		    unsigned short int7[18];
+	    } fmtb;
+    } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68KNOMMU_TRAPS_H */
diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h
new file mode 100644
index 00000000000..031238c2d18
--- /dev/null
+++ b/arch/m68knommu/include/asm/types.h
@@ -0,0 +1 @@
+#include <asm-m68k/types.h>
diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68knommu/include/asm/uaccess.h
new file mode 100644
index 00000000000..68bbe9b312f
--- /dev/null
+++ b/arch/m68knommu/include/asm/uaccess.h
@@ -0,0 +1,181 @@
+#ifndef __M68KNOMMU_UACCESS_H
+#define __M68KNOMMU_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define access_ok(type,addr,size)	_access_ok((unsigned long)(addr),(size))
+
+/*
+ * It is not enough to just have access_ok check for a real RAM address.
+ * This would disallow the case of code/ro-data running XIP in flash/rom.
+ * Ideally we would check the possible flash ranges too, but that is
+ * currently not so easy.
+ */
+static inline int _access_ok(unsigned long addr, unsigned long size)
+{
+	return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr)				\
+({							\
+    int __pu_err = 0;					\
+    typeof(*(ptr)) __pu_val = (x);			\
+    switch (sizeof (*(ptr))) {				\
+    case 1:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, b);	\
+	break;						\
+    case 2:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, w);	\
+	break;						\
+    case 4:						\
+	__put_user_asm(__pu_err, __pu_val, ptr, l);	\
+	break;						\
+    case 8:						\
+	memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
+	break;						\
+    default:						\
+	__pu_err = __put_user_bad();			\
+	break;						\
+    }							\
+    __pu_err;						\
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define __put_user_asm(err,x,ptr,bwl)				\
+	__asm__ ("move" #bwl " %0,%1"				\
+		: /* no outputs */						\
+		:"d" (x),"m" (*__ptr(ptr)) : "memory")
+
+#define get_user(x, ptr)					\
+({								\
+    int __gu_err = 0;						\
+    typeof(x) __gu_val = 0;					\
+    switch (sizeof(*(ptr))) {					\
+    case 1:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
+	break;							\
+    case 2:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, w, "=r");	\
+	break;							\
+    case 4:							\
+	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
+	break;							\
+    case 8:							\
+	memcpy((void *) &__gu_val, ptr, sizeof (*(ptr)));	\
+	break;							\
+    default:							\
+	__gu_val = 0;						\
+	__gu_err = __get_user_bad();				\
+	break;							\
+    }								\
+    (x) = (typeof(*(ptr))) __gu_val;				\
+    __gu_err;							\
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define __get_user_asm(err,x,ptr,bwl,reg)			\
+	__asm__ ("move" #bwl " %1,%0"				\
+		 : "=d" (x)					\
+		 : "m" (*__ptr(ptr)))
+
+#define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)		(memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+	char *tmp;
+	strncpy(dst, src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+	return(strlen(src) + 1); /* DAVIDM make safer */
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+__clear_user(void *to, unsigned long n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
+#define	clear_user(to,n)	__clear_user(to,n)
+
+#endif /* _M68KNOMMU_UACCESS_H */
diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68knommu/include/asm/ucontext.h
new file mode 100644
index 00000000000..713a27f901c
--- /dev/null
+++ b/arch/m68knommu/include/asm/ucontext.h
@@ -0,0 +1,32 @@
+#ifndef _M68KNOMMU_UCONTEXT_H
+#define _M68KNOMMU_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+typedef struct fpregset {
+	int f_pcr;
+	int f_psr;
+	int f_fpiaddr;
+	int f_fpregs[8][3];
+} fpregset_t;
+
+struct mcontext {
+	int version;
+	gregset_t gregs;
+	fpregset_t fpregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct mcontext	  uc_mcontext;
+	unsigned long	  uc_filler[80];
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif
diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68knommu/include/asm/unaligned.h
new file mode 100644
index 00000000000..eb1ea4cb9a5
--- /dev/null
+++ b/arch/m68knommu/include/asm/unaligned.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_M68KNOMMU_UNALIGNED_H
+#define _ASM_M68KNOMMU_UNALIGNED_H
+
+
+#ifdef CONFIG_COLDFIRE
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#else
+/*
+ * The m68k can do unaligned accesses itself. 
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif
+
+#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h
new file mode 100644
index 00000000000..b034a2f7b44
--- /dev/null
+++ b/arch/m68knommu/include/asm/unistd.h
@@ -0,0 +1,372 @@
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+#define __NR_idle		/* 112 */ Obsolete
+#define __NR_vm86		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_getpagesize	166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_chown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_lchown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_getdents64		220
+#define __NR_gettid		221
+#define __NR_tkill		222
+#define __NR_setxattr		223
+#define __NR_lsetxattr		224
+#define __NR_fsetxattr		225
+#define __NR_getxattr		226
+#define __NR_lgetxattr		227
+#define __NR_fgetxattr		228
+#define __NR_listxattr		229
+#define __NR_llistxattr		230
+#define __NR_flistxattr		231
+#define __NR_removexattr	232
+#define __NR_lremovexattr	233
+#define __NR_fremovexattr	234
+#define __NR_futex		235
+#define __NR_sendfile64		236
+#define __NR_mincore		237
+#define __NR_madvise		238
+#define __NR_fcntl64		239
+#define __NR_readahead		240
+#define __NR_io_setup		241
+#define __NR_io_destroy		242
+#define __NR_io_getevents	243
+#define __NR_io_submit		244
+#define __NR_io_cancel		245
+#define __NR_fadvise64		246
+#define __NR_exit_group		247
+#define __NR_lookup_dcookie	248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_remap_file_pages	252
+#define __NR_set_tid_address	253
+#define __NR_timer_create	254
+#define __NR_timer_settime	255
+#define __NR_timer_gettime	256
+#define __NR_timer_getoverrun	257
+#define __NR_timer_delete	258
+#define __NR_clock_settime	259
+#define __NR_clock_gettime	260
+#define __NR_clock_getres	261
+#define __NR_clock_nanosleep	262
+#define __NR_statfs64		263
+#define __NR_fstatfs64		264
+#define __NR_tgkill		265
+#define __NR_utimes		266
+#define __NR_fadvise64_64	267
+#define __NR_mbind		268
+#define __NR_get_mempolicy	269
+#define __NR_set_mempolicy	270
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_waitid		277
+#define __NR_vserver		278
+#define __NR_add_key		279
+#define __NR_request_key	280
+#define __NR_keyctl		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
+#define __NR_migrate_pages	287
+#define __NR_openat		288
+#define __NR_mkdirat		289
+#define __NR_mknodat		290
+#define __NR_fchownat		291
+#define __NR_futimesat		292
+#define __NR_fstatat64		293
+#define __NR_unlinkat		294
+#define __NR_renameat		295
+#define __NR_linkat		296
+#define __NR_symlinkat		297
+#define __NR_readlinkat		298
+#define __NR_fchmodat		299
+#define __NR_faccessat		300
+#define __NR_pselect6		301
+#define __NR_ppoll		302
+#define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
+#define __NR_move_pages		310
+#define __NR_sched_setaffinity	311
+#define __NR_sched_getaffinity	312
+#define __NR_kexec_load		313
+#define __NR_getcpu		314
+#define __NR_epoll_pwait	315
+#define __NR_utimensat		316
+#define __NR_signalfd		317
+#define __NR_timerfd_create	318
+#define __NR_eventfd		319
+#define __NR_fallocate		320
+#define __NR_timerfd_settime	321
+#define __NR_timerfd_gettime	322
+#define __NR_signalfd4		323
+#define __NR_eventfd2		324
+#define __NR_epoll_create1	325
+#define __NR_dup3		326
+#define __NR_pipe2		327
+#define __NR_inotify_init1	328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls		329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h
new file mode 100644
index 00000000000..a5a555b761c
--- /dev/null
+++ b/arch/m68knommu/include/asm/user.h
@@ -0,0 +1 @@
+#include <asm-m68k/user.h>
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 03f4fe6a2fc..5985f198902 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/module.h>
+#include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/errno.h>
 #include <linux/string.h>
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index fca2e49917a..812f8d8b7a8 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -341,6 +341,12 @@ ENTRY(sys_call_table)
 	.long sys_fallocate		/* 320 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 325 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index 0ccfb2ad638..d182b2f7221 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -33,14 +33,13 @@ static inline int set_rtc_mmss(unsigned long nowtime)
 	return -1;
 }
 
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
 irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 {
-	/* last time the cmos clock got updated */
-	static long last_rtc_update=0;
 
 	if (current->pid)
 		profile_tick(CPU_PROFILING);
@@ -49,21 +48,6 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 
 	do_timer(1);
 
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec  / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss(xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-
 	write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
@@ -71,8 +55,9 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 #endif
 	return(IRQ_HANDLED);
 }
+#endif
 
-void time_init(void)
+static unsigned long read_rtc_mmss(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -83,10 +68,21 @@ void time_init(void)
 
 	if ((year += 1900) < 1970)
 		year += 100;
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
-	wall_to_monotonic.tv_sec = -xtime.tv_sec;
 
-	hw_timer_init();
+	return  mktime(year, mon, day, hour, min, sec);;
+}
+
+unsigned long read_persistent_clock(void)
+{
+	return read_rtc_mmss();
 }
 
+int update_persistent_clock(struct timespec now)
+{
+	return set_rtc_mmss(now.tv_sec);
+}
+
+void time_init(void)
+{
+	hw_timer_init();
+}
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index ec9aea652e7..46f8f9d0c40 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -103,12 +103,28 @@ asmlinkage void buserr_c(struct frame *fp)
 	force_sig(SIGSEGV, current);
 }
 
+static void print_this_address(unsigned long addr, int i)
+{
+#ifdef CONFIG_KALLSYMS
+	printk(KERN_EMERG " [%08lx] ", addr);
+	print_symbol(KERN_CONT "%s\n", addr);
+#else
+	if (i % 5)
+		printk(KERN_CONT " [%08lx] ", addr);
+	else
+		printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+	i++;
+#endif
+}
+
 int kstack_depth_to_print = 48;
 
 static void __show_stack(struct task_struct *task, unsigned long *stack)
 {
 	unsigned long *endstack, addr;
+#ifdef CONFIG_FRAME_POINTER
 	unsigned long *last_stack;
+#endif
 	int i;
 
 	if (!stack)
@@ -126,6 +142,7 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 		printk(" %08lx", *(stack + i));
 	}
 	printk("\n");
+	i = 0;
 
 #ifdef CONFIG_FRAME_POINTER
 	printk(KERN_EMERG "Call Trace:\n");
@@ -134,15 +151,30 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 	while (stack <= endstack && stack > last_stack) {
 
 		addr = *(stack + 1);
-		printk(KERN_EMERG " [%08lx] ", addr);
-		print_symbol(KERN_CONT "%s\n", addr);
+		print_this_address(addr, i);
+		i++;
 
 		last_stack = stack;
 		stack = (unsigned long *)*stack;
 	}
 	printk("\n");
 #else
-	printk(KERN_EMERG "CONFIG_FRAME_POINTER disabled, no symbolic call trace\n");
+	printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n");
+	while (stack <= endstack) {
+		addr = *stack++;
+		/*
+		 * If the address is either in the text segment of the kernel,
+		 * or in a region which is occupied by a module then it *may*
+		 * be the address of a calling routine; if so, print it so that
+		 * someone tracing down the cause of the crash will be able to
+		 * figure out the call path that was taken.
+		 */
+		if (__kernel_text_address(addr)) {
+			print_this_address(addr, i);
+			i++;
+		}
+	}
+	printk(KERN_CONT "\n");
 #endif
 }
 
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 93e69236ed6..69ba9b10767 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -62,6 +62,7 @@ SECTIONS {
 	.text : {
 		_text = .;
 		_stext = . ;
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index 22e2a0d02b8..3bf249c53e4 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -62,33 +62,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 40cf20be1b9..4f416a91a82 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_COLDFIRE)	+= dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o
 obj-$(CONFIG_M5206e)	+= timers.o
 obj-$(CONFIG_M520x)	+= pit.o
-obj-$(CONFIG_M523x)	+= pit.o
+obj-$(CONFIG_M523x)	+= pit.o dma_timer.o
 obj-$(CONFIG_M5249)	+= timers.o
 obj-$(CONFIG_M527x)	+= pit.o
 obj-$(CONFIG_M5272)	+= timers.o
diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
new file mode 100644
index 00000000000..772578b1084
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -0,0 +1,84 @@
+/*
+ * dma_timer.c -- Freescale ColdFire DMA Timer.
+ *
+ * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright (C) 2008. Sebastian Siewior, Linutronix
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+#define DMA_TIMER_0	(0x00)
+#define DMA_TIMER_1	(0x40)
+#define DMA_TIMER_2	(0x80)
+#define DMA_TIMER_3	(0xc0)
+
+#define DTMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x400)
+#define DTXMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x402)
+#define DTER0	(MCF_IPSBAR + DMA_TIMER_0 + 0x403)
+#define DTRR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x404)
+#define DTCR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x408)
+#define DTCN0	(MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
+
+#define DMA_FREQ    ((MCF_CLK / 2) / 16)
+
+/* DTMR */
+#define DMA_DTMR_RESTART	(1 << 3)
+#define DMA_DTMR_CLK_DIV_1	(1 << 1)
+#define DMA_DTMR_CLK_DIV_16	(2 << 1)
+#define DMA_DTMR_ENABLE		(1 << 0)
+
+static cycle_t cf_dt_get_cycles(void)
+{
+	return __raw_readl(DTCN0);
+}
+
+static struct clocksource clocksource_cf_dt = {
+	.name		= "coldfire_dma_timer",
+	.rating		= 200,
+	.read		= cf_dt_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init  init_cf_dt_clocksource(void)
+{
+	/*
+	 * We setup DMA timer 0 in free run mode. This incrementing counter is
+	 * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
+	 * get a ~213 ns resolution and the 32bit register will overflow almost
+	 * every 15 minutes.
+	 */
+	__raw_writeb(0x00, DTXMR0);
+	__raw_writeb(0x00, DTER0);
+	__raw_writel(0x00000000, DTRR0);
+	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
+	clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
+						     clocksource_cf_dt.shift);
+	return clocksource_register(&clocksource_cf_dt);
+}
+
+arch_initcall(init_cf_dt_clocksource);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+#define CYC2NS_SCALE	((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
+
+static unsigned long long cycles2ns(unsigned long cycl)
+{
+	return (unsigned long long) ((unsigned long long)cycl *
+			CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long cycl = __raw_readl(DTCN0);
+
+	return cycles2ns(cycl);
+}
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index b9aa0ca29bf..2b0d73c0cc3 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -10,6 +10,7 @@
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/asm-offsets.h>
 #include <asm/coldfire.h>
 #include <asm/mcfcache.h>
@@ -126,7 +127,7 @@ _ramend:
 
 /*****************************************************************************/
 
-.text
+__HEAD
 
 /*
  *	This is the codes first entry point. This is where it all
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 4290638012e..c5b916700b2 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
 #include <asm/coldfire.h>
@@ -33,22 +33,86 @@
 #define	FREQ	((MCF_CLK / 2) / 64)
 #define	TA(a)	(MCF_IPSBAR + MCFPIT_BASE1 + (a))
 #define	INTC0	(MCF_IPSBAR + MCFICM_INTC0)
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
 
-static u32 pit_cycles_per_jiffy;
 static u32 pit_cnt;
 
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static void init_cf_pit_timer(enum clock_event_mode mode,
+                             struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
+				MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
+				TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+		struct clock_event_device *evt)
+{
+	__raw_writew(delta, TA(MCFPIT_PMR));
+	return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+	.name		= "pit",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= init_cf_pit_timer,
+	.set_next_event	= cf_pit_next_event,
+	.shift		= 32,
+	.irq		= MCFINT_VECBASE + MCFINT_PIT1,
+};
+
+
+
 /***************************************************************************/
 
 static irqreturn_t pit_tick(int irq, void *dummy)
 {
+	struct clock_event_device *evt = &cf_pit_clockevent;
 	u16 pcsr;
 
 	/* Reset the ColdFire timer */
 	pcsr = __raw_readw(TA(MCFPIT_PCSR));
 	__raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
 
-	pit_cnt += pit_cycles_per_jiffy;
-	return arch_timer_interrupt(irq, dummy);
+	pit_cnt += PIT_CYCLES_PER_JIFFY;
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
 }
 
 /***************************************************************************/
@@ -72,14 +136,14 @@ static cycle_t pit_read_clk(void)
 	cycles = pit_cnt;
 	local_irq_restore(flags);
 
-	return cycles + pit_cycles_per_jiffy - pcntr;
+	return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
 }
 
 /***************************************************************************/
 
 static struct clocksource pit_clk = {
 	.name	= "pit",
-	.rating	= 250,
+	.rating	= 100,
 	.read	= pit_read_clk,
 	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
@@ -92,6 +156,14 @@ void hw_timer_init(void)
 {
 	u32 imr;
 
+	cf_pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id());
+	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+	cf_pit_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+	cf_pit_clockevent.min_delta_ns =
+		clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+	clockevents_register_device(&cf_pit_clockevent);
+
 	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
 
 	__raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1);
@@ -99,13 +171,6 @@ void hw_timer_init(void)
 	imr &= ~MCFPIT_IMR_IBIT;
 	__raw_writel(imr, INTC0 + MCFPIT_IMR);
 
-	/* Set up PIT timer 1 as poll clock */
-	pit_cycles_per_jiffy = FREQ / HZ;
-	__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
-	__raw_writew(pit_cycles_per_jiffy, TA(MCFPIT_PMR));
-	__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | MCFPIT_PCSR_OVW |
-		MCFPIT_PCSR_RLD | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
-
 	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
 	clocksource_register(&pit_clk);
 }
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d21df5f1b1f..49896a2a1d7 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3,6 +3,7 @@ config MIPS
 	default y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 	select RTC_LIB
@@ -34,7 +35,6 @@ config BASLER_EXCITE
 	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	help
 	  The eXcite is a smart camera platform manufactured by
 	  Basler Vision Technologies AG.
@@ -280,7 +280,6 @@ config PMC_MSP
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select IRQ_CPU
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
@@ -306,7 +305,6 @@ config PMC_YOSEMITE
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_SMP
 	help
 	  Yosemite is an evaluation board for the RM9000x2 processor
@@ -330,6 +328,7 @@ config SGI_IP22
 	select SGI_HAS_DS1286
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
+	select SGI_HAS_HAL2
 	select SGI_HAS_SEEQ
 	select SGI_HAS_WD93
 	select SGI_HAS_ZILOG
@@ -358,7 +357,6 @@ config SGI_IP27
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
 	select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -386,7 +384,6 @@ config SGI_IP28
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
 	select SGI_HAS_HAL2
-	select SGI_HAS_HAL2
 	select SGI_HAS_SEEQ
 	select SGI_HAS_WD93
 	select SGI_HAS_ZILOG
@@ -475,7 +472,6 @@ config SIBYTE_SWARM
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
 
@@ -558,6 +554,24 @@ config MACH_TX39XX
 config MACH_TX49XX
 	bool "Toshiba TX49 series based machines"
 
+config MIKROTIK_RB532
+	bool "Mikrotik RB532 boards"
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SWAP_IO_SPACE
+	select BOOT_RAW
+	select GENERIC_GPIO
+	help
+	  Support the Mikrotik(tm) RouterBoard 532 series,
+	  based on the IDT RC32434 SoC.
+
 config WR_PPMC
 	bool "Wind River PPMC board"
 	select CEVT_R4K
@@ -695,7 +709,7 @@ config CSRC_SB1250
 
 config GPIO_TXX9
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	bool
 
 config CFE
@@ -850,7 +864,6 @@ config SOC_PNX8550
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select SYS_SUPPORTS_KGDB
 	select GENERIC_GPIO
 
 config SWAP_IO_SPACE
@@ -899,7 +912,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MACH_DECSTATION
+	default "4" if MACH_DECSTATION || MIKROTIK_RB532
 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
 	default "4" if PMC_MSP4200_EVAL
 	default "5"
@@ -1873,6 +1886,15 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
+config PROBE_INITRD_HEADER
+	bool "Probe initrd header created by addinitrd"
+	depends on BLK_DEV_INITRD
+	help
+	  Probe initrd header at the last page of kernel image.
+	  Say Y here if you are using arch/mips/boot/addinitrd.c to
+	  add initrd or initramfs image to the kernel image.
+	  Otherwise, say N.
+
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index f18cf92650e..765c8e287d2 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG
 	  arch/mips/kernel/smtc.c.  This debugging option result in significant
 	  overhead so should be disabled in production kernels.
 
-config KGDB
-	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
-	select DEBUG_INFO
-	help
-	  If you say Y here, it will be possible to remotely debug the MIPS
-	  kernel using gdb. This enlarges your kernel image disk size by
-	  several megabytes and requires a machine with more than 16 MB,
-	  better 32 MB RAM to avoid excessive linking time. This is only
-	  useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
-	bool
-
-config GDB_CONSOLE
-	bool "Console output to GDB"
-	depends on KGDB
-	help
-	  If you are using GDB for remote debugging over a serial port and
-	  would like kernel messages to be formatted into GDB $O packets so
-	  that GDB prints them as program output, say 'Y'.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 356453322b4..9aab51caf16 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -560,6 +560,13 @@ load-$(CONFIG_MACH_TX49XX)	+= 0xffffffff80100000
 core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/txx9/jmr3927/
 
 #
+# Routerboard 532 board
+#
+core-$(CONFIG_MIKROTIK_RB532)	+= arch/mips/rb532/
+cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434
+load-$(CONFIG_MIKROTIK_RB532)	+= 0xffffffff80101000
+
+#
 # Toshiba RBTX4927 board or
 # Toshiba RBTX4937 board
 #
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index 1fe97cccead..e4a057d80ab 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -134,4 +134,3 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
-	select SYS_SUPPORTS_KGDB
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index dd0e19dacfc..df48fd65bbf 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_PCI)		+= pci.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
deleted file mode 100644
index af5be7df2f2..00000000000
--- a/arch/mips/au1000/common/dbg_io.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE  UART_DEBUG_BASE
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-
-#define UART_RX		0	/* Receive buffer */
-#define UART_TX		4	/* Transmit buffer */
-#define UART_IER	8	/* Interrupt Enable Register */
-#define UART_IIR	0xC	/* Interrupt ID Register */
-#define UART_FCR	0x10	/* FIFO Control Register */
-#define UART_LCR	0x14	/* Line Control Register */
-#define UART_MCR	0x18	/* Modem Control Register */
-#define UART_LSR	0x1C	/* Line Status Register */
-#define UART_MSR	0x20	/* Modem Status Register */
-#define UART_CLK	0x28	/* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL	0x100	/* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
-		UART16550_WRITE(UART_MOD_CNTRL, 3);
-	calc_clock();
-
-	/* disable interrupts */
-	UART16550_WRITE(UART_IER, 0);
-
-	/* set up baud rate */
-	{
-		u32 divisor;
-
-		/* set divisor */
-		divisor = get_au1x00_uart_baud_base() / baud;
-		UART16550_WRITE(UART_CLK, divisor & 0xffff);
-	}
-
-	/* set data format */
-	UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x1) == 0);
-	return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x40) == 0);
-	UART16550_WRITE(UART_TX, byte);
-
-	return 1;
-}
-
-#endif
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
index b485d94ce8a..e660ddd611c 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value)
 {
 	gpio -= AU1XXX_GPIO_BASE;
 
-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
 }
 
 static int au1xxx_gpio2_direction_input(unsigned gpio)
@@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio)
 static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
 {
 	gpio -= AU1XXX_GPIO_BASE;
-	gpio2->dir = (0x01 << gpio) | (value << gpio);
+	gpio2->dir |= 0x01 << gpio;
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
 	return 0;
 }
 
@@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio)
 static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
 {
 	gpio1->trioutclr = (0x01 & gpio);
+	au1xxx_gpio1_write(gpio, value);
 	return 0;
 }
 
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 2166b9e1e80..bd854a6d1d8 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -31,7 +31,6 @@
 
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>
 
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 5ebe0de5e45..84741351496 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -57,6 +57,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 33a4aebe0cb..3bae13c2895 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -55,6 +55,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 3837365d613..8a9c7d57208 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -52,6 +52,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index 8355483f3de..7c6792308bc 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -54,7 +54,7 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 09fd63b8606..e9b2a0fd48a 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 49f51e16586..3b6e395cf95 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index 1b5f58434bb..e1055a13a1a 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index b849bf501c0..7516434760a 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
index 519142c2e4e..cff29cf46d0 100644
--- a/arch/mips/basler/excite/Makefile
+++ b/arch/mips/basler/excite/Makefile
@@ -5,5 +5,4 @@
 obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
 				   excite_device.o excite_procfs.o
 
-obj-$(CONFIG_KGDB)		+= excite_dbg_io.o
 obj-m				+= excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
deleted file mode 100644
index d289e3a868c..00000000000
--- a/arch/mips/basler/excite/excite_dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK		25000000
-#define BASE_BAUD		(UART_CLK / 16)
-#define REGISTER_BASE_0		0x0208UL
-#define REGISTER_BASE_1		0x0238UL
-
-#define REGISTER_BASE_DBG	REGISTER_BASE_1
-
-#define CPRR	0x0004
-#define UACFG	0x0200
-#define UAINTS	0x0204
-#define UARBR	(REGISTER_BASE_DBG + 0x0000)
-#define UATHR	(REGISTER_BASE_DBG + 0x0004)
-#define UADLL	(REGISTER_BASE_DBG + 0x0008)
-#define UAIER	(REGISTER_BASE_DBG + 0x000c)
-#define UADLH	(REGISTER_BASE_DBG + 0x0010)
-#define UAIIR	(REGISTER_BASE_DBG + 0x0014)
-#define UAFCR	(REGISTER_BASE_DBG + 0x0018)
-#define UALCR	(REGISTER_BASE_DBG + 0x001c)
-#define UAMCR	(REGISTER_BASE_DBG + 0x0020)
-#define UALSR	(REGISTER_BASE_DBG + 0x0024)
-#define UAMSR	(REGISTER_BASE_DBG + 0x0028)
-#define UASCR	(REGISTER_BASE_DBG + 0x002c)
-
-#define	PARITY_NONE	0
-#define	PARITY_ODD	0x08
-#define	PARITY_EVEN	0x18
-#define	PARITY_MARK	0x28
-#define	PARITY_SPACE	0x38
-
-#define	DATA_5BIT	0x0
-#define	DATA_6BIT	0x1
-#define	DATA_7BIT	0x2
-#define	DATA_8BIT	0x3
-
-#define	STOP_1BIT	0x0
-#define	STOP_2BIT	0x4
-
-#define BAUD_DBG	57600
-#define	PARITY_DBG	PARITY_NONE
-#define	DATA_DBG	DATA_8BIT
-#define	STOP_DBG	STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
-	const u32 divisor = BASE_BAUD / BAUD_DBG;
-
-	/* Take the UART out of reset */
-	titan_writel(0x00ff1cff, CPRR);
-	titan_writel(0x00000000, UACFG);
-	titan_writel(0x00000002, UACFG);
-
-	titan_writel(0x0, UALCR);
-	titan_writel(0x0, UAIER);
-
-	/* Disable FIFOs */
-	titan_writel(0x00, UAFCR);
-
-	titan_writel(0x80, UALCR);
-	titan_writel(divisor & 0xff, UADLL);
-	titan_writel((divisor & 0xff00) >> 8, UADLH);
-	titan_writel(0x0, UALCR);
-
-	titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
-	/* Enable receiver interrupt */
-	titan_readl(UARBR);
-	titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
-	while (!(titan_readl(UALSR) & 0x1));
-	return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
-	while (!(titan_readl(UALSR) & 0x20));
-	titan_writel(data, UATHR);
-	return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
-	if (unlikely(
-		((titan_readl(UAIIR) & 0x7) == 4)
-		&& ((titan_readl(UARBR) & 0xff) == 0x3)))
-			set_async_breakpoint(&regs->cp0_epc);
-}
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
index 4903e067916..934e0a6b101 100644
--- a/arch/mips/basler/excite/excite_irq.c
+++ b/arch/mips/basler/excite/excite_irq.c
@@ -50,10 +50,6 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
-	excite_kgdb_init();
-#endif
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void)
 	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
 	if ((pending & (1 << TITAN_IRQ)) && msgint) {
 		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
-		excite_kgdb_inthdl();
-#endif
 		do_IRQ(TITAN_IRQ);
 		return;
 	}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 6dd8f0d46d0..d66b3b8edf2 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -95,13 +95,13 @@ static int __init excite_init_console(void)
 	/* Take the DUART out of reset */
 	titan_writel(0x00ff1cff, CPRR);
 
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
 	/* Enable both ports */
 	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
 #else
 	/* Enable port #0 only */
 	titan_writel(MASK_SER0, UACFG);
-#endif	/* defined(CONFIG_KGDB) */
+#endif
 
  	/*
 	 * Set up serial port #0. Do not use autodetection; the result is
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index dd23beb8604..b5164422724 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -81,8 +81,8 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
 
-	/* I/O port resource must include LCD/buttons */
-	ioport_resource.end = 0x0fffffff;
+	/* I/O port resource */
+	ioport_resource.end = 0x01ffffff;
 
 	/* These resources have been reserved by VIA SuperI/O chip. */
 	for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 2678b7ec335..eb44b72254a 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep  6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
@@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
@@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -177,23 +198,37 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -250,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -337,6 +372,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -475,7 +520,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -504,7 +548,9 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
@@ -518,29 +564,27 @@ CONFIG_ATA=y
 CONFIG_PATA_VIA=y
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -562,7 +606,12 @@ CONFIG_TULIP=y
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -572,6 +621,7 @@ CONFIG_TULIP=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -580,7 +630,6 @@ CONFIG_TULIP=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -588,7 +637,6 @@ CONFIG_TULIP=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -642,7 +689,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -751,15 +858,18 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -833,16 +942,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -967,7 +1057,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -1057,14 +1134,95 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index ebb8ad62b3a..a279165e3a7 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index ad4e5ef6559..8944d15caf1 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index d0dc2e83ad3..ab17973107f 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 9155082313c..b65803f1935 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index e4e324422cd..a190ac07740 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 3572e80356d..4e465e94599 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 138c575a015..831d3e5a1ea 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 59d19472b16..dd13db4d0fb 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bacf0dd0e34..db9272677aa 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 6dfe6f793ce..9e21e333a2f 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index c965a87e6a9..af67ed4f71a 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 0778996c682..7956f56cbf3 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 37c7b5ffd47..723bd5176a3 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 893e5c4ab66..b5052fb42e9 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
new file mode 100644
index 00000000000..f28dc32974e
--- /dev/null
+++ b/arch/mips/configs/rb532_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25
+# Mon Apr 28 12:24:17 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+CONFIG_MIKROTIK_RB532=y
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="vegas"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+CONFIG_PATA_RB532=y
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_IFB=m
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_KORINA=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_NAPI=y
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+CONFIG_ATMEL=m
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index e42aed5a38b..c7c0864b8ce 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1ea97865f2c..a9acaa2f9da 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 7f86c43d1bd..ea8249c75b3 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index 11567702b15..d70627de7cf 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -34,7 +34,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 62bfb455d1b..b6a23ad539f 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -25,25 +25,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/initrd.h>
-#include <linux/irq.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/param.h>	/* for HZ */
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
+
 #include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/traps.h>
-#include <asm/debug.h>
 
 #include <asm/emma2rh/emma2rh.h>
 
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index f60524e8bc4..7043f6b9ff3 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -5,35 +5,22 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1996, 1997, 1998, 2001, 07 by Ralf Baechle
+ * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
  * Copyright (C) 2001 MIPS Technologies, Inc.
  * Copyright (C) 2007 by Thomas Bogendoerfer
  */
 #include <linux/eisa.h>
-#include <linux/hdreg.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
 #include <linux/console.h>
-#include <linux/fb.h>
-#include <linux/ide.h>
-#include <linux/pm.h>
 #include <linux/screen_info.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
 #include <asm/jazz.h>
 #include <asm/jazzdma.h>
 #include <asm/reboot.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
-#include <asm/time.h>
-#include <asm/traps.h>
-#include <asm/mc146818-time.h>
 
 extern asmlinkage void jazz_handle_int(void);
 
diff --git a/arch/mips/kernel/.gitignore b/arch/mips/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/mips/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 0fd31974ba2..706f9397479 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -71,7 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
 
-obj-$(CONFIG_KGDB)		+= gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 335a6ae3d59..11c92dc5379 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -45,18 +45,7 @@ static void r39xx_wait(void)
 	local_irq_enable();
 }
 
-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	wait				\n"
-		"	.set	mips0			\n");
-}
+extern void r4k_wait(void);
 
 /*
  * This variant is preferable as it allows testing need_resched and going to
@@ -128,7 +117,7 @@ static int __init wait_disable(char *s)
 
 __setup("nowait", wait_disable);
 
-static inline void check_wait(void)
+void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
@@ -242,7 +231,6 @@ static inline void check_errata(void)
 
 void __init check_bugs32(void)
 {
-	check_wait();
 	check_errata();
 }
 
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644
index 2c446063636..00000000000
--- a/arch/mips/kernel/gdb-low.S
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0	mfc0
-#define DMTC0	mtc0
-#define LDC1	lwc1
-#define SDC1	lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0	dmfc0
-#define DMTC0	dmtc0
-#define LDC1	ldc1
-#define SDC1	ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
-		.align 	5
-		NESTED(trap_low, GDB_FR_SIZE, sp)
-		.set	noat
-		.set 	noreorder
-
-		mfc0	k0, CP0_STATUS
-		sll	k0, 3     		/* extract cu0 bit */
-		bltz	k0, 1f
-		move	k1, sp
-
-		/*
-		 * Called from user mode, go somewhere else.
-		 */
-		mfc0	k0, CP0_CAUSE
-		andi	k0, k0, 0x7c
-#ifdef CONFIG_64BIT
-		dsll	k0, k0, 1
-#endif
-		PTR_L	k1, saved_vectors(k0)
-		jr	k1
-		nop
-1:
-		move	k0, sp
-		PTR_SUBU sp, k1, GDB_FR_SIZE*2	# see comment above
-		LONG_S	k0, GDB_FR_REG29(sp)
-		LONG_S	$2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
-		mfc0	v0, CP0_STATUS
-		LONG_S	v0, GDB_FR_STATUS(sp)
-		mfc0	v0, CP0_CAUSE
-		LONG_S	v0, GDB_FR_CAUSE(sp)
-		DMFC0	v0, CP0_EPC
-		LONG_S	v0, GDB_FR_EPC(sp)
-		DMFC0	v0, CP0_BADVADDR
-		LONG_S	v0, GDB_FR_BADVADDR(sp)
-		mfhi	v0
-		LONG_S	v0, GDB_FR_HI(sp)
-		mflo	v0
-		LONG_S	v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
-		LONG_S	zero, GDB_FR_REG0(sp)		/* I know... */
-		LONG_S	$1, GDB_FR_REG1(sp)
-		/* v0 already saved */
-		LONG_S	$3, GDB_FR_REG3(sp)
-		LONG_S	$4, GDB_FR_REG4(sp)
-		LONG_S	$5, GDB_FR_REG5(sp)
-		LONG_S	$6, GDB_FR_REG6(sp)
-		LONG_S	$7, GDB_FR_REG7(sp)
-		LONG_S	$8, GDB_FR_REG8(sp)
-		LONG_S	$9, GDB_FR_REG9(sp)
-		LONG_S	$10, GDB_FR_REG10(sp)
-		LONG_S	$11, GDB_FR_REG11(sp)
-		LONG_S	$12, GDB_FR_REG12(sp)
-		LONG_S	$13, GDB_FR_REG13(sp)
-		LONG_S	$14, GDB_FR_REG14(sp)
-		LONG_S	$15, GDB_FR_REG15(sp)
-		LONG_S	$16, GDB_FR_REG16(sp)
-		LONG_S	$17, GDB_FR_REG17(sp)
-		LONG_S	$18, GDB_FR_REG18(sp)
-		LONG_S	$19, GDB_FR_REG19(sp)
-		LONG_S	$20, GDB_FR_REG20(sp)
-		LONG_S	$21, GDB_FR_REG21(sp)
-		LONG_S	$22, GDB_FR_REG22(sp)
-		LONG_S	$23, GDB_FR_REG23(sp)
-		LONG_S	$24, GDB_FR_REG24(sp)
-		LONG_S	$25, GDB_FR_REG25(sp)
-		LONG_S	$26, GDB_FR_REG26(sp)
-		LONG_S	$27, GDB_FR_REG27(sp)
-		LONG_S	$28, GDB_FR_REG28(sp)
-		/* sp already saved */
-		LONG_S	$30, GDB_FR_REG30(sp)
-		LONG_S	$31, GDB_FR_REG31(sp)
-
-		CLI				/* disable interrupts */
-		TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* FPU enabled? */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0,2f			/* disabled, skip */
-		 nop
-
-		SDC1	$0, GDB_FR_FPR0(sp)
-		SDC1	$1, GDB_FR_FPR1(sp)
-		SDC1	$2, GDB_FR_FPR2(sp)
-		SDC1	$3, GDB_FR_FPR3(sp)
-		SDC1	$4, GDB_FR_FPR4(sp)
-		SDC1	$5, GDB_FR_FPR5(sp)
-		SDC1	$6, GDB_FR_FPR6(sp)
-		SDC1	$7, GDB_FR_FPR7(sp)
-		SDC1	$8, GDB_FR_FPR8(sp)
-		SDC1	$9, GDB_FR_FPR9(sp)
-		SDC1	$10, GDB_FR_FPR10(sp)
-		SDC1	$11, GDB_FR_FPR11(sp)
-		SDC1	$12, GDB_FR_FPR12(sp)
-		SDC1	$13, GDB_FR_FPR13(sp)
-		SDC1	$14, GDB_FR_FPR14(sp)
-		SDC1	$15, GDB_FR_FPR15(sp)
-		SDC1	$16, GDB_FR_FPR16(sp)
-		SDC1	$17, GDB_FR_FPR17(sp)
-		SDC1	$18, GDB_FR_FPR18(sp)
-		SDC1	$19, GDB_FR_FPR19(sp)
-		SDC1	$20, GDB_FR_FPR20(sp)
-		SDC1	$21, GDB_FR_FPR21(sp)
-		SDC1	$22, GDB_FR_FPR22(sp)
-		SDC1	$23, GDB_FR_FPR23(sp)
-		SDC1	$24, GDB_FR_FPR24(sp)
-		SDC1	$25, GDB_FR_FPR25(sp)
-		SDC1	$26, GDB_FR_FPR26(sp)
-		SDC1	$27, GDB_FR_FPR27(sp)
-		SDC1	$28, GDB_FR_FPR28(sp)
-		SDC1	$29, GDB_FR_FPR29(sp)
-		SDC1	$30, GDB_FR_FPR30(sp)
-		SDC1	$31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
-		cfc1	v0, CP1_STATUS
-		LONG_S	v0, GDB_FR_FSR(sp)
-		cfc1	v0, CP1_REVISION
-		LONG_S	v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
-		LONG_S	sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
-		mfc0	v0, CP0_INDEX
-		LONG_S	v0, GDB_FR_CP0_INDEX(sp)
-		mfc0	v0, CP0_RANDOM
-		LONG_S	v0, GDB_FR_CP0_RANDOM(sp)
-		DMFC0	v0, CP0_ENTRYLO0
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		DMFC0	v0, CP0_ENTRYLO1
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO1(sp)
-		DMFC0	v0, CP0_CONTEXT
-		LONG_S	v0, GDB_FR_CP0_CONTEXT(sp)
-		mfc0	v0, CP0_PAGEMASK
-		LONG_S	v0, GDB_FR_CP0_PAGEMASK(sp)
-		mfc0	v0, CP0_WIRED
-		LONG_S	v0, GDB_FR_CP0_WIRED(sp)
-		DMFC0	v0, CP0_ENTRYHI
-		LONG_S	v0, GDB_FR_CP0_ENTRYHI(sp)
-		mfc0	v0, CP0_PRID
-		LONG_S	v0, GDB_FR_CP0_PRID(sp)
-
-		.set	at
-
-/*
- * Continue with the higher level handler
- */
-
-		move	a0,sp
-
-		jal	handle_exception
-		 nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
-		.set	noat
-
-		LONG_L	v0, GDB_FR_CP0_ENTRYHI(sp)
-		LONG_L	v1, GDB_FR_CP0_WIRED(sp)
-		DMTC0	v0, CP0_ENTRYHI
-		mtc0	v1, CP0_WIRED
-		LONG_L	v0, GDB_FR_CP0_PAGEMASK(sp)
-		LONG_L	v1, GDB_FR_CP0_ENTRYLO1(sp)
-		mtc0	v0, CP0_PAGEMASK
-		DMTC0	v1, CP0_ENTRYLO1
-		LONG_L	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		LONG_L	v1, GDB_FR_CP0_INDEX(sp)
-		DMTC0	v0, CP0_ENTRYLO0
-		LONG_L	v0, GDB_FR_CP0_CONTEXT(sp)
-		mtc0	v1, CP0_INDEX
-		DMTC0	v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* check if the FPU is enabled */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0, 3f			/* disabled, skip */
-		 nop
-
-		LDC1	$31, GDB_FR_FPR31(sp)
-		LDC1	$30, GDB_FR_FPR30(sp)
-		LDC1	$29, GDB_FR_FPR29(sp)
-		LDC1	$28, GDB_FR_FPR28(sp)
-		LDC1	$27, GDB_FR_FPR27(sp)
-		LDC1	$26, GDB_FR_FPR26(sp)
-		LDC1	$25, GDB_FR_FPR25(sp)
-		LDC1	$24, GDB_FR_FPR24(sp)
-		LDC1	$23, GDB_FR_FPR23(sp)
-		LDC1	$22, GDB_FR_FPR22(sp)
-		LDC1	$21, GDB_FR_FPR21(sp)
-		LDC1	$20, GDB_FR_FPR20(sp)
-		LDC1	$19, GDB_FR_FPR19(sp)
-		LDC1	$18, GDB_FR_FPR18(sp)
-		LDC1	$17, GDB_FR_FPR17(sp)
-		LDC1	$16, GDB_FR_FPR16(sp)
-		LDC1	$15, GDB_FR_FPR15(sp)
-		LDC1	$14, GDB_FR_FPR14(sp)
-		LDC1	$13, GDB_FR_FPR13(sp)
-		LDC1	$12, GDB_FR_FPR12(sp)
-		LDC1	$11, GDB_FR_FPR11(sp)
-		LDC1	$10, GDB_FR_FPR10(sp)
-		LDC1	$9, GDB_FR_FPR9(sp)
-		LDC1	$8, GDB_FR_FPR8(sp)
-		LDC1	$7, GDB_FR_FPR7(sp)
-		LDC1	$6, GDB_FR_FPR6(sp)
-		LDC1	$5, GDB_FR_FPR5(sp)
-		LDC1	$4, GDB_FR_FPR4(sp)
-		LDC1	$3, GDB_FR_FPR3(sp)
-		LDC1	$2, GDB_FR_FPR2(sp)
-		LDC1	$1, GDB_FR_FPR1(sp)
-		LDC1	$0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* Read-modify write of Status must be atomic */
-		mfc0	t2, CP0_TCSTATUS
-		ori	t1, t2, TCSTATUS_IXMT
-		mtc0	t1, CP0_TCSTATUS
-		andi	t2, t2, TCSTATUS_IXMT
-		_ehb
-		DMT	9				# dmt	t1
-		jal	mips_ihb
-		nop
-#endif /* CONFIG_MIPS_MT_SMTC */
-		mfc0	t0, CP0_STATUS
-		ori	t0, 0x1f
-		xori	t0, 0x1f
-		mtc0	t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-        	andi    t1, t1, VPECONTROL_TE
-        	beqz    t1, 9f
-		nop
-        	EMT					# emt
-9:
-		mfc0	t1, CP0_TCSTATUS
-		xori	t1, t1, TCSTATUS_IXMT
-		or	t1, t1, t2
-		mtc0	t1, CP0_TCSTATUS
-		_ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
-		LONG_L	v0, GDB_FR_STATUS(sp)
-		LONG_L	v1, GDB_FR_EPC(sp)
-		mtc0	v0, CP0_STATUS
-		DMTC0	v1, CP0_EPC
-		LONG_L	v0, GDB_FR_HI(sp)
-		LONG_L	v1, GDB_FR_LO(sp)
-		mthi	v0
-		mtlo	v1
-		LONG_L	$31, GDB_FR_REG31(sp)
-		LONG_L	$30, GDB_FR_REG30(sp)
-		LONG_L	$28, GDB_FR_REG28(sp)
-		LONG_L	$27, GDB_FR_REG27(sp)
-		LONG_L	$26, GDB_FR_REG26(sp)
-		LONG_L	$25, GDB_FR_REG25(sp)
-		LONG_L	$24, GDB_FR_REG24(sp)
-		LONG_L	$23, GDB_FR_REG23(sp)
-		LONG_L	$22, GDB_FR_REG22(sp)
-		LONG_L	$21, GDB_FR_REG21(sp)
-		LONG_L	$20, GDB_FR_REG20(sp)
-		LONG_L	$19, GDB_FR_REG19(sp)
-		LONG_L	$18, GDB_FR_REG18(sp)
-		LONG_L	$17, GDB_FR_REG17(sp)
-		LONG_L	$16, GDB_FR_REG16(sp)
-		LONG_L	$15, GDB_FR_REG15(sp)
-		LONG_L	$14, GDB_FR_REG14(sp)
-		LONG_L	$13, GDB_FR_REG13(sp)
-		LONG_L	$12, GDB_FR_REG12(sp)
-		LONG_L	$11, GDB_FR_REG11(sp)
-		LONG_L	$10, GDB_FR_REG10(sp)
-		LONG_L	$9, GDB_FR_REG9(sp)
-		LONG_L	$8, GDB_FR_REG8(sp)
-		LONG_L	$7, GDB_FR_REG7(sp)
-		LONG_L	$6, GDB_FR_REG6(sp)
-		LONG_L	$5, GDB_FR_REG5(sp)
-		LONG_L	$4, GDB_FR_REG4(sp)
-		LONG_L	$3, GDB_FR_REG3(sp)
-		LONG_L	$2, GDB_FR_REG2(sp)
-		LONG_L	$1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-		LONG_L	k0, GDB_FR_EPC(sp)
-		LONG_L	$29, GDB_FR_REG29(sp)		/* Deallocate stack */
-		jr	k0
-		rfe
-#else
-		LONG_L	sp, GDB_FR_REG29(sp)		/* Deallocate stack */
-
-		.set	mips3
-		eret
-		.set	mips0
-#endif
-		.set	at
-		.set	reorder
-		END(trap_low)
-
-LEAF(kgdb_read_byte)
-4:		lb	t0, (a0)
-		sb	t0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	4b, kgdbfault
-		.previous
-		END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5:		sb	a0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	5b, kgdbfault
-		.previous
-		END(kgdb_write_byte)
-
-		.type	kgdbfault@function
-		.ent	kgdbfault
-
-kgdbfault:	li	v0, -EFAULT
-		jr	ra
-		.end	kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644
index 25f4eab8ea9..00000000000
--- a/arch/mips/kernel/gdb-stub.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- *  arch/mips/kernel/gdb-stub.c
- *
- *  Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- *  Contributed by HP Systems
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- *  Copyright (C) 1995 Andreas Busse
- *
- *  Copyright (C) 2003 MontaVista Software Inc.
- *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a BREAK instruction.
- *
- *
- *    The following gdb commands are supported:
- *
- * command          function                               Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- *
- *  ==============
- *  MORE EXAMPLES:
- *  ==============
- *
- *  For reference -- the following are the steps that one
- *  company took (RidgeRun Inc) to get remote gdb debugging
- *  going. In this scenario the host machine was a PC and the
- *  target platform was a Galileo EVB64120A MIPS evaluation
- *  board.
- *
- *  Step 1:
- *  First download gdb-5.0.tar.gz from the internet.
- *  and then build/install the package.
- *
- *  Example:
- *    $ tar zxf gdb-5.0.tar.gz
- *    $ cd gdb-5.0
- *    $ ./configure --target=mips-linux-elf
- *    $ make
- *    $ install
- *    $ which mips-linux-elf-gdb
- *    /usr/local/bin/mips-linux-elf-gdb
- *
- *  Step 2:
- *  Configure linux for remote debugging and build it.
- *
- *  Example:
- *    $ cd ~/linux
- *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- *    $ make
- *
- *  Step 3:
- *  Download the kernel to the remote target and start
- *  the kernel running. It will promptly halt and wait
- *  for the host gdb session to connect. It does this
- *  since the "Kernel Hacking" option has defined
- *  CONFIG_KGDB which in turn enables your calls
- *  to:
- *     set_debug_traps();
- *     breakpoint();
- *
- *  Step 4:
- *  Start the gdb session on the host.
- *
- *  Example:
- *    $ mips-linux-elf-gdb vmlinux
- *    (gdb) set remotebaud 115200
- *    (gdb) target remote /dev/ttyS1
- *    ...at this point you are connected to
- *       the remote target and can use gdb
- *       in the normal fasion. Setting
- *       breakpoints, single stepping,
- *       printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c);    /* write a single character      */
-extern char getDebugChar(void);     /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized;	/* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access.  Note that they'll crash anyway if
-   we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/*
-		 * wait around for the start character,
-		 * ignore all other characters
-		 */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-		count = 0;
-
-		/*
-		 * now, read until a # or end of buffer is found
-		 */
-		while (count < BUFMAX) {
-			ch = getDebugChar();
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-
-				/*
-				 * if a sequence char is present,
-				 * reply the sequence ID
-				 */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-
-					/*
-					 * remove sequence chars from buffer
-					 */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	}
-	while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch;
-
-	/*
-	 * $<packet info>#<checksum>.
-	 */
-
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count]) != 0) {
-			if (!(putDebugChar(ch)))
-				return;
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-
-	}
-	while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
-	unsigned char ch;
-
-	while (count-- > 0) {
-		if (kgdb_read_byte(mem++, &ch) != 0)
-			return 0;
-		*buf++ = hexchars[ch >> 4];
-		*buf++ = hexchars[ch & 0xf];
-	}
-
-	*buf = 0;
-
-	return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
-	int i;
-	unsigned char ch;
-
-	for (i=0; i<count; i++)
-	{
-		if (binary) {
-			ch = *buf++;
-			if (ch == 0x7d)
-				ch = 0x20 ^ *buf++;
-		}
-		else {
-			ch = hex(*buf++) << 4;
-			ch |= hex(*buf++);
-		}
-		if (kgdb_write_byte(ch, mem++) != 0)
-			return 0;
-	}
-
-	return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands.  It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
-	unsigned char tt;		/* Trap type code for MIPS R3xxx and R4xxx */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-	{ 6, SIGBUS },			/* instruction bus error */
-	{ 7, SIGBUS },			/* data bus error */
-	{ 9, SIGTRAP },			/* break */
-	{ 10, SIGILL },			/* reserved instruction */
-/*	{ 11, SIGILL },		*/	/* CPU unusable */
-	{ 12, SIGFPE },			/* overflow */
-	{ 13, SIGTRAP },		/* trap */
-	{ 14, SIGSEGV },		/* virtual instruction cache coherency */
-	{ 15, SIGFPE },			/* floating point exception */
-	{ 23, SIGSEGV },		/* watch */
-	{ 31, SIGSEGV },		/* virtual data cache coherency */
-	{ 0, 0}				/* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-	unsigned char c;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
-	putDebugChar('+'); /* 'hello world' */
-	/*
-	 * In case GDB is started before us, ack any packets
-	 * (presumably "$?#xx") sitting there.
-	 */
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-
-	initialized = 1;
-	local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		set_except_vector(ht->tt, saved_vectors[ht->tt]);
-	local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP;		/* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*intValue = (*intValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*longValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*longValue = (*longValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
-	/*
-	 * Saved main processor registers
-	 */
-	printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg0, regs->reg1, regs->reg2, regs->reg3,
-	       regs->reg4, regs->reg5, regs->reg6, regs->reg7);
-	printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg8, regs->reg9, regs->reg10, regs->reg11,
-	       regs->reg12, regs->reg13, regs->reg14, regs->reg15);
-	printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg16, regs->reg17, regs->reg18, regs->reg19,
-	       regs->reg20, regs->reg21, regs->reg22, regs->reg23);
-	printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg24, regs->reg25, regs->reg26, regs->reg27,
-	       regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
-	/*
-	 * Saved cp0 registers
-	 */
-	printk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
-	       regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
-	unsigned long addr;
-	unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d  /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
-	union mips_instruction insn;
-	unsigned long targ;
-	int is_branch, is_cond, i;
-
-	targ = regs->cp0_epc;
-	insn.word = *(unsigned int *)targ;
-	is_branch = is_cond = 0;
-
-	switch (insn.i_format.opcode) {
-	/*
-	 * jr and jalr are in r_format format.
-	 */
-	case spec_op:
-		switch (insn.r_format.func) {
-		case jalr_op:
-		case jr_op:
-			targ = *(&regs->reg0 + insn.r_format.rs);
-			is_branch = 1;
-			break;
-		}
-		break;
-
-	/*
-	 * This group contains:
-	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
-	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-	 */
-	case bcond_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-
-	/*
-	 * These are unconditional and in j_format.
-	 */
-	case jal_op:
-	case j_op:
-		is_branch = 1;
-		targ += 4;
-		targ >>= 28;
-		targ <<= 28;
-		targ |= (insn.j_format.target << 2);
-		break;
-
-	/*
-	 * These are conditional.
-	 */
-	case beq_op:
-	case beql_op:
-	case bne_op:
-	case bnel_op:
-	case blez_op:
-	case blezl_op:
-	case bgtz_op:
-	case bgtzl_op:
-	case cop0_op:
-	case cop1_op:
-	case cop2_op:
-	case cop1x_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-	}
-
-	if (is_branch) {
-		i = 0;
-		if (is_cond && targ != (regs->cp0_epc + 8)) {
-			step_bp[i].addr = regs->cp0_epc + 8;
-			step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
-			*(unsigned *)(regs->cp0_epc + 8) = BP;
-		}
-		step_bp[i].addr = targ;
-		step_bp[i].val  = *(unsigned *)targ;
-		*(unsigned *)targ = BP;
-	} else {
-		step_bp[0].addr = regs->cp0_epc + 4;
-		step_bp[0].val  = *(unsigned *)(regs->cp0_epc + 4);
-		*(unsigned *)(regs->cp0_epc + 4) = BP;
-	}
-}
-
-/*
- *  If asynchronously interrupted by gdb, then we need to set a breakpoint
- *  at the interrupted instruction so that we wind up stopped with a
- *  reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required.  The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
-	/* skip breaking into userland */
-	if ((*epc & 0x80000000) == 0)
-		return;
-
-#ifdef CONFIG_SMP
-	/* avoid deadlock if someone is make IPC */
-	if (spin_is_locked(&smp_call_lock))
-		return;
-#endif
-
-	async_bp.addr = *epc;
-	*epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
-	unsigned flags;
-	int cpu = smp_processor_id();
-
-	local_irq_save(flags);
-
-	__raw_spin_lock(&kgdb_cpulock[cpu]);
-	__raw_spin_unlock(&kgdb_cpulock[cpu]);
-
-	local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
-	cpumask_t mask = cpu_online_map;
-	struct call_data_struct data;
-	int cpu = smp_processor_id();
-	int cpus;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	BUG_ON(!cpu_online(cpu));
-
-	cpu_clear(cpu, mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		return 0;
-
-	if (spin_is_locked(&smp_call_lock)) {
-		/*
-		 * Some other processor is trying to make us do something
-		 * but we're not going to respond... give up
-		 */
-		return -1;
-		}
-
-	/*
-	 * We will continue here, accepting the fact that
-	 * the kernel may deadlock if another CPU attempts
-	 * to call smp_call_function now...
-	 */
-
-	data.func = kgdb_wait;
-	data.info = NULL;
-	atomic_set(&data.started, 0);
-	data.wait = 0;
-
-	spin_lock(&smp_call_lock);
-	call_data = &data;
-	mb();
-
-	core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-	/* Wait for response */
-	/* FIXME: lock-up detection, backtrace on lock-up */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	call_data = NULL;
-	spin_unlock(&smp_call_lock);
-#endif
-
-	return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb.  It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
-	int trap;			/* Trap type */
-	int sigval;
-	long addr;
-	int length;
-	char *ptr;
-	unsigned long *stack;
-	int i;
-	int bflag = 0;
-
-	kgdb_started = 1;
-
-	/*
-	 * acquire the big kgdb spinlock
-	 */
-	if (!spin_trylock(&kgdb_lock)) {
-		/*
-		 * some other CPU has the lock, we should go back to
-		 * receive the gdb_wait IPC
-		 */
-		return;
-	}
-
-	/*
-	 * If we're in async_breakpoint(), restore the real EPC from
-	 * the breakpoint.
-	 */
-	if (regs->cp0_epc == (unsigned long)async_breakinst) {
-		regs->cp0_epc = async_bp.addr;
-		async_bp.addr = 0;
-	}
-
-	/*
-	 * acquire the CPU spinlocks
-	 */
-	for_each_online_cpu(i)
-		if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
-			panic("kgdb: couldn't get cpulock %d\n", i);
-
-	/*
-	 * force other cpus to enter kgdb
-	 */
-	kgdb_smp_call_kgdb_wait();
-
-	/*
-	 * If we're in breakpoint() increment the PC
-	 */
-	trap = (regs->cp0_cause & 0x7c) >> 2;
-	if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
-		regs->cp0_epc += 4;
-
-	/*
-	 * If we were single_stepping, restore the opcodes hoisted
-	 * for the breakpoint[s].
-	 */
-	if (step_bp[0].addr) {
-		*(unsigned *)step_bp[0].addr = step_bp[0].val;
-		step_bp[0].addr = 0;
-
-		if (step_bp[1].addr) {
-			*(unsigned *)step_bp[1].addr = step_bp[1].val;
-			step_bp[1].addr = 0;
-		}
-	}
-
-	stack = (long *)regs->reg29;			/* stack ptr */
-	sigval = computeSignal(trap);
-
-	/*
-	 * reply to host that an exception has occurred
-	 */
-	ptr = output_buffer;
-
-	/*
-	 * Send trap type (converted to signal)
-	 */
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-
-	/*
-	 * Send Error PC
-	 */
-	*ptr++ = hexchars[REG_EPC >> 4];
-	*ptr++ = hexchars[REG_EPC & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send frame pointer
-	 */
-	*ptr++ = hexchars[REG_FP >> 4];
-	*ptr++ = hexchars[REG_FP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send stack pointer
-	 */
-	*ptr++ = hexchars[REG_SP >> 4];
-	*ptr++ = hexchars[REG_SP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	*ptr++ = 0;
-	putpacket(output_buffer);	/* send it off... */
-
-	/*
-	 * Wait for input from remote GDB
-	 */
-	while (1) {
-		output_buffer[0] = 0;
-		getpacket(input_buffer);
-
-		switch (input_buffer[0])
-		{
-		case '?':
-			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
-			output_buffer[3] = 0;
-			break;
-
-		/*
-		 * Detach debugger; let CPU run
-		 */
-		case 'D':
-			putpacket(output_buffer);
-			goto finish_kgdb;
-			break;
-
-		case 'd':
-			/* toggle debug flag */
-			break;
-
-		/*
-		 * Return the value of the CPU registers
-		 */
-		case 'g':
-			ptr = output_buffer;
-			ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
-			ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
-			ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
-			ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
-			ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
-			ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
-			break;
-
-		/*
-		 * set the value of the CPU registers - return OK
-		 */
-		case 'G':
-		{
-			ptr = &input_buffer[1];
-			hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
-			ptr += 6*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
-			strcpy(output_buffer, "OK");
-		 }
-		break;
-
-		/*
-		 * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
-		 */
-		case 'm':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, output_buffer, length, 1))
-					break;
-				strcpy(output_buffer, "E03");
-			} else
-				strcpy(output_buffer, "E01");
-			break;
-
-		/*
-		 * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
-		 */
-		case 'X':
-			bflag = 1;
-			/* fall through */
-
-		/*
-		 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
-		 */
-		case 'M':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)
-				&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length, bflag, 1))
-					strcpy(output_buffer, "OK");
-				else
-					strcpy(output_buffer, "E03");
-			}
-			else
-				strcpy(output_buffer, "E02");
-			break;
-
-		/*
-		 * cAA..AA    Continue at address AA..AA(optional)
-		 */
-		case 'c':
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &input_buffer[1];
-			if (hexToLong(&ptr, &addr))
-				regs->cp0_epc = addr;
-
-			goto exit_kgdb_exception;
-			break;
-
-		/*
-		 * kill the program; let us try to restart the machine
-		 * Reset the whole machine.
-		 */
-		case 'k':
-		case 'r':
-			machine_restart("kgdb restarts machine");
-			break;
-
-		/*
-		 * Step to next instruction
-		 */
-		case 's':
-			/*
-			 * There is no single step insn in the MIPS ISA, so we
-			 * use breakpoints and continue, instead.
-			 */
-			single_step(regs);
-			goto exit_kgdb_exception;
-			/* NOTREACHED */
-			break;
-
-		/*
-		 * Set baud rate (bBB)
-		 * FIXME: Needs to be written
-		 */
-		case 'b':
-		{
-#if 0
-			int baudrate;
-			extern void set_timer_3();
-
-			ptr = &input_buffer[1];
-			if (!hexToInt(&ptr, &baudrate))
-			{
-				strcpy(output_buffer, "B01");
-				break;
-			}
-
-			/* Convert baud rate to uart clock divider */
-
-			switch (baudrate)
-			{
-				case 38400:
-					baudrate = 16;
-					break;
-				case 19200:
-					baudrate = 33;
-					break;
-				case 9600:
-					baudrate = 65;
-					break;
-				default:
-					baudrate = 0;
-					strcpy(output_buffer, "B02");
-					goto x1;
-			}
-
-			if (baudrate) {
-				putpacket("OK");	/* Ack before changing speed */
-				set_timer_3(baudrate); /* Set it */
-			}
-#endif
-		}
-		break;
-
-		}			/* switch */
-
-		/*
-		 * reply to the request
-		 */
-
-		putpacket(output_buffer);
-
-	} /* while */
-
-	return;
-
-finish_kgdb:
-	restore_debug_traps();
-
-exit_kgdb_exception:
-	/* release locks so other CPUs can go */
-	for_each_online_cpu(i)
-		__raw_spin_unlock(&kgdb_cpulock[i]);
-	spin_unlock(&kgdb_lock);
-
-	__flush_cache_all();
-	return;
-}
-
-/*
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
-	if (!initialized)
-		return;
-
-	__asm__ __volatile__(
-			".globl	breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
-	__asm__ __volatile__(
-			".globl	async_breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"async_breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-void adel(void)
-{
-	__asm__ __volatile__(
-			".globl\tadel\n\t"
-			"lui\t$8,0x8000\n\t"
-			"lw\t$9,1($8)\n\t"
-			);
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
-	return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
-	kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
-	char outbuf[18];
-
-	if (!kgdb_started)
-		return;
-
-	outbuf[0]='O';
-
-	while(l) {
-		int i = (l>8)?8:l;
-		mem2hex((char *)str, &outbuf[1], i, 0);
-		outbuf[(i*2)+1]=0;
-		putpacket(outbuf);
-		str += i;
-		l -= i;
-	}
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
-	gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
-	.name	= "gdb",
-	.write	= gdb_console_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1
-};
-
-static int __init register_gdb_console(void)
-{
-	register_console(&gdb_console);
-
-	return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index c6ada98ee04..f886dd7f708 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -20,6 +20,7 @@
 #include <asm/stackframe.h>
 #include <asm/war.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 #define PANIC_PIC(msg)					\
 		.set push;				\
@@ -126,7 +127,42 @@ handle_vcei:
 
 	__FINIT
 
+	.align	5	/* 32 byte rollback region */
+LEAF(r4k_wait)
+	.set	push
+	.set	noreorder
+	/* start of rollback region */
+	LONG_L	t0, TI_FLAGS($28)
+	nop
+	andi	t0, _TIF_NEED_RESCHED
+	bnez	t0, 1f
+	 nop
+	nop
+	nop
+	.set	mips3
+	wait
+	/* end of rollback region (the region size must be power of two) */
+	.set	pop
+1:
+	jr	ra
+	END(r4k_wait)
+
+	.macro	BUILD_ROLLBACK_PROLOGUE handler
+	FEXPORT(rollback_\handler)
+	.set	push
+	.set	noat
+	MFC0	k0, CP0_EPC
+	PTR_LA	k1, r4k_wait
+	ori	k0, 0x1f	/* 32 byte rollback region */
+	xori	k0, 0x1f
+	bne	k0, k1, 9f
+	MTC0	k0, CP0_EPC
+9:
+	.set pop
+	.endm
+
 	.align  5
+BUILD_ROLLBACK_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/*
@@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp)
  * This prototype is copied to ebase + n*IntCtl.VS and patched
  * to invoke the handler
  */
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
 NESTED(except_vec_vi, 0, sp)
 	SAVE_SOME
 	SAVE_AT
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 6045b9a51a3..4b4007b3083 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -21,11 +21,16 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
+#include <linux/kgdb.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
 static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
 
 int allocate_irqno(void)
@@ -126,33 +131,22 @@ asmlinkage void spurious_interrupt(void)
 	atomic_inc(&irq_err_count);
 }
 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
 void __init init_IRQ(void)
 {
 	int i;
 
+#ifdef CONFIG_KGDB
+	if (kgdb_early_setup)
+		return;
+#endif
+
 	for (i = 0; i < NR_IRQS; i++)
 		set_irq_noprobe(i);
 
 	arch_init_irq();
 
 #ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		printk("Wait for gdb client connection ...\n");
-		set_debug_traps();
-		breakpoint();
-	}
+	if (!kgdb_early_setup)
+		kgdb_early_setup = 1;
 #endif
 }
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
new file mode 100644
index 00000000000..6e152c80cd4
--- /dev/null
+++ b/arch/mips/kernel/kgdb.c
@@ -0,0 +1,277 @@
+/*
+ *  Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ *  Contributed by HP Systems
+ *
+ *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ *  Copyright (C) 1995 Andreas Busse
+ *
+ *  Copyright (C) 2003 MontaVista Software Inc.
+ *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  Copyright (C) 2004-2005 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ *  Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *  Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ *  This file is licensed under the terms of the GNU General Public License
+ *  version 2. This program is licensed "as is" without any warranty of any
+ *  kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>		/* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+	unsigned char tt;	/* Trap type code for MIPS R3xxx and R4xxx */
+	unsigned char signo;	/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 6, SIGBUS },		/* instruction bus error */
+	{ 7, SIGBUS },		/* data bus error */
+	{ 9, SIGTRAP },		/* break */
+/*	{ 11, SIGILL },	*/	/* CPU unusable */
+	{ 12, SIGFPE },		/* overflow */
+	{ 13, SIGTRAP },	/* trap */
+	{ 14, SIGSEGV },	/* virtual instruction cache coherency */
+	{ 15, SIGFPE },		/* floating point exception */
+	{ 23, SIGSEGV },	/* watch */
+	{ 31, SIGSEGV },	/* virtual data cache coherency */
+	{ 0, 0}			/* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__(
+		".globl breakinst\n\t"
+		".set\tnoreorder\n\t"
+		"nop\n"
+		"breakinst:\tbreak\n\t"
+		"nop\n\t"
+		".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), NULL);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+	local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+
+	/* FP REGS */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	save_fp(current);
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	const u32 *ptr = (u32 *)gdb_regs;
+#else
+	const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		regs->regs[reg] = *(ptr++);
+
+	regs->cp0_status = *(ptr++);
+	regs->lo = *(ptr++);
+	regs->hi = *(ptr++);
+	regs->cp0_badvaddr = *(ptr++);
+	regs->cp0_cause = *(ptr++);
+	regs->cp0_epc = *(ptr++);
+
+	/* FP REGS from current */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	for (reg = 0; reg < 32; reg++)
+		current->thread.fpu.fpr[reg] = *(ptr++);
+	restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	int reg;
+	struct thread_info *ti = task_thread_info(p);
+	unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 16; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	/* S0 - S7 */
+	for (reg = 16; reg < 24; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	for (reg = 24; reg < 28; reg++)
+		*(ptr++) = 0;
+
+	/* GP, SP, FP, RA */
+	for (reg = 28; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+			    void *ptr)
+{
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+	int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+	/* Userpace events, ignore. */
+	if (user_mode(regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_active) != -1)
+		kgdb_nmicallback(smp_processor_id(), regs);
+
+	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_setting_breakpoint))
+		if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+			regs->cp0_epc += 4;
+
+	/* In SMP mode, __flush_cache_all does IPI */
+	local_irq_enable();
+	__flush_cache_all();
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+	int cpu = smp_processor_id();
+
+	switch (remcom_in_buffer[0]) {
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->cp0_epc = address;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		if (remcom_in_buffer[0] == 's')
+			atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+		return 0;
+	}
+
+	return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+	union mips_instruction insn = {
+		.r_format = {
+			.opcode = spec_op,
+			.func   = break_op,
+		}
+	};
+	memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+	register_die_notifier(&kgdb_notifier);
+
+	return 0;
+}
+
+/*
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 65af3cc90ab..2fefb14414b 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -11,7 +11,6 @@
 #include <linux/file.h>
 #include <linux/smp_lock.h>
 #include <linux/highuid.h>
-#include <linux/dirent.h>
 #include <linux/resource.h>
 #include <linux/highmem.h>
 #include <linux/time.h>
@@ -129,23 +128,6 @@ out:
 	return error;
 }
 
-
-asmlinkage int sys_truncate64(const char __user *path, unsigned int high,
-			      unsigned int low)
-{
-	if ((int)high < 0)
-		return -EINVAL;
-	return sys_truncate(path, ((long) high << 32) | low);
-}
-
-asmlinkage int sys_ftruncate64(unsigned int fd, unsigned int high,
-			       unsigned int low)
-{
-	if ((int)high < 0)
-		return -EINVAL;
-	return sys_ftruncate(fd, ((long) high << 32) | low);
-}
-
 /*
  * sys_execve() executes a new program.
  */
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index e7ed0ac4853..1f60e27523d 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -22,6 +22,7 @@
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c06f5b5d764..ce7684335a4 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -53,7 +53,7 @@ void __noreturn cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 			extern void smtc_idle_loop_hook(void);
@@ -148,6 +148,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
 #ifdef CONFIG_MIPS_MT_FPAFF
+	clear_tsk_thread_flag(p, TIF_FPUBOUND);
+
 	/*
 	 * FPU affinity support is cleaner if we track the
 	 * user-visible CPU affinity from the very beginning.
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index b5564196123..dfd868b6836 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -522,8 +522,8 @@ static int __init rtlx_module_init(void)
 		atomic_set(&channel_wqs[i].in_open, 0);
 		mutex_init(&channel_wqs[i].mutex);
 
-		dev = device_create(mt_class, NULL, MKDEV(major, i),
-		                    "%s%d", module_name, i);
+		dev = device_create_drvdata(mt_class, NULL, MKDEV(major, i),
+					    NULL, "%s%d", module_name, i);
 		if (IS_ERR(dev)) {
 			err = PTR_ERR(dev);
 			goto out_chrdev;
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index c058c0b61a2..5e75a316f6b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -354,7 +354,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_mkdir		2
 	sys	sys_rmdir		1	/* 4040 */
 	sys	sys_dup			1
-	sys	sys_pipe		0
+	sys	sysm_pipe		0
 	sys	sys_times		1
 	sys	sys_ni_syscall		0
 	sys	sys_brk			1	/* 4045 */
@@ -647,6 +647,12 @@ einval:	li	v0, -EINVAL
 	sys	sys_timerfd_create	2
 	sys	sys_timerfd_gettime	2
 	sys	sys_timerfd_settime	4
+	sys	sys_signalfd4		4
+	sys	sys_eventfd2		2	/* 4325 */
+	sys	sys_epoll_create1	1
+	sys	sys_dup3		3
+	sys	sys_pipe2		2
+	sys	sys_inotify_init1	1
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index dc597b600c6..3d58204c9d4 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -219,7 +219,7 @@ sys_call_table:
 	PTR	sys_readv
 	PTR	sys_writev
 	PTR	sys_access			/* 5020 */
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	sys_select
 	PTR	sys_sched_yield
 	PTR	sys_mremap
@@ -481,4 +481,10 @@ sys_call_table:
 	PTR	sys_timerfd_create		/* 5280 */
 	PTR	sys_timerfd_gettime
 	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1		/* 5285 */
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 12940eca789..da7f1b6ea0f 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -141,7 +141,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_readv
 	PTR	compat_sys_writev
 	PTR	sys_access			/* 6020 */
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	compat_sys_select
 	PTR	sys_sched_yield
 	PTR	sys_mremap
@@ -407,4 +407,10 @@ EXPORT(sysn32_call_table)
 	PTR	sys_timerfd_create
 	PTR	sys_timerfd_gettime		/* 5285 */
 	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1
+	PTR	sys_dup3			/* 5290 */
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 9a275efb4f0..d7cd1aac9ad 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -247,7 +247,7 @@ sys_call_table:
 	PTR	sys_mkdir
 	PTR	sys_rmdir			/* 4040 */
 	PTR	sys_dup
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	compat_sys_times
 	PTR	sys_ni_syscall
 	PTR	sys_brk				/* 4045 */
@@ -529,4 +529,10 @@ sys_call_table:
 	PTR	sys_timerfd_create
 	PTR	sys_timerfd_gettime
 	PTR	sys_timerfd_settime
+	PTR	compat_sys_signalfd4
+	PTR	sys_eventfd2			/* 4325 */
+	PTR	sys_epoll_create1
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 8af84867e74..16f8edfe5cd 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -78,7 +78,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 
 	/* Sanity check */
 	if (start + size < start) {
-		printk("Trying to add an invalid memory region, skipped\n");
+		pr_warning("Trying to add an invalid memory region, skipped\n");
 		return;
 	}
 
@@ -92,7 +92,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 	}
 
 	if (x == BOOT_MEM_MAP_MAX) {
-		printk("Ooops! Too many entries in the memory map!\n");
+		pr_err("Ooops! Too many entries in the memory map!\n");
 		return;
 	}
 
@@ -108,22 +108,22 @@ static void __init print_memory_map(void)
 	const int field = 2 * sizeof(unsigned long);
 
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		printk(" memory: %0*Lx @ %0*Lx ",
+		printk(KERN_INFO " memory: %0*Lx @ %0*Lx ",
 		       field, (unsigned long long) boot_mem_map.map[i].size,
 		       field, (unsigned long long) boot_mem_map.map[i].addr);
 
 		switch (boot_mem_map.map[i].type) {
 		case BOOT_MEM_RAM:
-			printk("(usable)\n");
+			printk(KERN_CONT "(usable)\n");
 			break;
 		case BOOT_MEM_ROM_DATA:
-			printk("(ROM data)\n");
+			printk(KERN_CONT "(ROM data)\n");
 			break;
 		case BOOT_MEM_RESERVED:
-			printk("(reserved)\n");
+			printk(KERN_CONT "(reserved)\n");
 			break;
 		default:
-			printk("type %lu\n", boot_mem_map.map[i].type);
+			printk(KERN_CONT "type %lu\n", boot_mem_map.map[i].type);
 			break;
 		}
 	}
@@ -160,36 +160,39 @@ early_param("rd_size", rd_size_early);
 static unsigned long __init init_initrd(void)
 {
 	unsigned long end;
-	u32 *initrd_header;
 
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
 	 * perfom sanity checks and use them if all looks good.
 	 */
-	if (initrd_start && initrd_end > initrd_start)
-		goto sanitize;
+	if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+		u32 *initrd_header;
 
-	/*
-	 * See if initrd has been added to the kernel image by
-	 * arch/mips/boot/addinitrd.c. In that case a header is
-	 * prepended to initrd and is made up by 8 bytes. The fisrt
-	 * word is a magic number and the second one is the size of
-	 * initrd.  Initrd start must be page aligned in any cases.
-	 */
-	initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
-	if (initrd_header[0] != 0x494E5244)
+		/*
+		 * See if initrd has been added to the kernel image by
+		 * arch/mips/boot/addinitrd.c. In that case a header is
+		 * prepended to initrd and is made up by 8 bytes. The first
+		 * word is a magic number and the second one is the size of
+		 * initrd.  Initrd start must be page aligned in any cases.
+		 */
+		initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+		if (initrd_header[0] != 0x494E5244)
+			goto disable;
+		initrd_start = (unsigned long)(initrd_header + 2);
+		initrd_end = initrd_start + initrd_header[1];
+#else
 		goto disable;
-	initrd_start = (unsigned long)(initrd_header + 2);
-	initrd_end = initrd_start + initrd_header[1];
+#endif
+	}
 
-sanitize:
 	if (initrd_start & ~PAGE_MASK) {
-		printk(KERN_ERR "initrd start must be page aligned\n");
+		pr_err("initrd start must be page aligned\n");
 		goto disable;
 	}
 	if (initrd_start < PAGE_OFFSET) {
-		printk(KERN_ERR "initrd start < PAGE_OFFSET\n");
+		pr_err("initrd start < PAGE_OFFSET\n");
 		goto disable;
 	}
 
@@ -221,18 +224,18 @@ static void __init finalize_initrd(void)
 		goto disable;
 	}
 	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
-		printk("Initrd extends beyond end of memory");
+		printk(KERN_ERR "Initrd extends beyond end of memory");
 		goto disable;
 	}
 
 	reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT);
 	initrd_below_start_ok = 1;
 
-	printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n",
-	       initrd_start, size);
+	pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n",
+		initrd_start, size);
 	return;
 disable:
-	printk(" - disabling initrd\n");
+	printk(KERN_CONT " - disabling initrd\n");
 	initrd_start = 0;
 	initrd_end = 0;
 }
@@ -310,14 +313,12 @@ static void __init bootmem_init(void)
 	if (min_low_pfn >= max_low_pfn)
 		panic("Incorrect memory mapping !!!");
 	if (min_low_pfn > ARCH_PFN_OFFSET) {
-		printk(KERN_INFO
-		       "Wasting %lu bytes for tracking %lu unused pages\n",
-		       (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
-		       min_low_pfn - ARCH_PFN_OFFSET);
+		pr_info("Wasting %lu bytes for tracking %lu unused pages\n",
+			(min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
+			min_low_pfn - ARCH_PFN_OFFSET);
 	} else if (min_low_pfn < ARCH_PFN_OFFSET) {
-		printk(KERN_INFO
-		       "%lu free pages won't be used\n",
-		       ARCH_PFN_OFFSET - min_low_pfn);
+		pr_info("%lu free pages won't be used\n",
+			ARCH_PFN_OFFSET - min_low_pfn);
 	}
 	min_low_pfn = ARCH_PFN_OFFSET;
 
@@ -471,7 +472,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	/* call board setup routine */
 	plat_mem_setup();
 
-	printk("Determined physical RAM map:\n");
+	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
 	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
@@ -482,7 +483,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	parse_early_param();
 
 	if (usermem) {
-		printk("User-defined physical RAM map:\n");
+		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
 	}
 
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 5eb4681a73d..0632e2a849c 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -7,6 +7,7 @@
  */
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
+#include <linux/module.h>
 #include <asm/stacktrace.h>
 
 /*
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index af1bdc89748..343015a2f41 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -40,12 +40,19 @@
 #include <asm/sysmips.h>
 #include <asm/uaccess.h>
 
-asmlinkage int sys_pipe(nabi_no_regargs volatile struct pt_regs regs)
+/*
+ * For historic reasons the pipe(2) syscall on MIPS has an unusual calling
+ * convention.  It returns results in registers $v0 / $v1 which means there
+ * is no need for it to do verify the validity of a userspace pointer
+ * argument.  Historically that used to be expensive in Linux.  These days
+ * the performance advantage is negligible.
+ */
+asmlinkage int sysm_pipe(nabi_no_regargs volatile struct pt_regs regs)
 {
 	int fd[2];
 	int error, res;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error) {
 		res = error;
 		goto out;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b8ea4e9d0d8..5fd0cd020af 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -23,6 +23,8 @@
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -44,6 +46,9 @@
 #include <asm/types.h>
 #include <asm/stacktrace.h>
 
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_tlbm(void);
 extern asmlinkage void handle_tlbl(void);
@@ -371,8 +376,8 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 	do_exit(SIGSEGV);
 }
 
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
 
 __asm__(
 "	.section	__dbe_table, \"a\"\n"
@@ -425,6 +430,10 @@ asmlinkage void do_be(struct pt_regs *regs)
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
+	if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Oops", regs);
 	force_sig(SIGBUS, current);
 }
@@ -623,6 +632,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
 	siginfo_t info;
 
+	if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+	    == NOTIFY_STOP)
+		return;
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
@@ -682,6 +694,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	siginfo_t info;
 	char b[40];
 
+	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+
 	/*
 	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
 	 * insns, even for trap and break codes that indicate arithmetic
@@ -762,6 +777,10 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	unsigned int opcode = 0;
 	int status = -1;
 
+	if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Reserved instruction in kernel code", regs);
 
 	if (unlikely(compute_return_epc(regs) < 0))
@@ -1184,7 +1203,7 @@ void *set_except_vector(int n, void *addr)
 	if (n == 0 && cpu_has_divec) {
 		*(u32 *)(ebase + 0x200) = 0x08000000 |
 					  (0x03ffffff & (handler >> 2));
-		flush_icache_range(ebase + 0x200, ebase + 0x204);
+		local_flush_icache_range(ebase + 0x200, ebase + 0x204);
 	}
 	return (void *)old_handler;
 }
@@ -1235,6 +1254,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 
 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
+		extern char rollback_except_vec_vi;
+		char *vec_start = (cpu_wait == r4k_wait) ?
+			&rollback_except_vec_vi : &except_vec_vi;
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
 		 * We need to provide the SMTC vectored interrupt handler
@@ -1242,11 +1264,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		 * Status.IM bit to be masked before going there.
 		 */
 		extern char except_vec_vi_mori;
-		const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+		const int mori_offset = &except_vec_vi_mori - vec_start;
 #endif /* CONFIG_MIPS_MT_SMTC */
-		const int handler_len = &except_vec_vi_end - &except_vec_vi;
-		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
-		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+		const int handler_len = &except_vec_vi_end - vec_start;
+		const int lui_offset = &except_vec_vi_lui - vec_start;
+		const int ori_offset = &except_vec_vi_ori - vec_start;
 
 		if (handler_len > VECTORSPACING) {
 			/*
@@ -1256,7 +1278,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 			panic("VECTORSPACING too small");
 		}
 
-		memcpy(b, &except_vec_vi, handler_len);
+		memcpy(b, vec_start, handler_len);
 #ifdef CONFIG_MIPS_MT_SMTC
 		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */
 
@@ -1267,7 +1289,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
 		w = (u32 *)(b + ori_offset);
 		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
-		flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+handler_len));
 	}
 	else {
 		/*
@@ -1279,7 +1302,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		w = (u32 *)b;
 		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
 		*w = 0;
-		flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+8));
 	}
 
 	return (void *)old_handler;
@@ -1499,7 +1523,7 @@ void __cpuinit per_cpu_trap_init(void)
 void __init set_handler(unsigned long offset, void *addr, unsigned long size)
 {
 	memcpy((void *)(ebase + offset), addr, size);
-	flush_icache_range(ebase + offset, ebase + offset + size);
+	local_flush_icache_range(ebase + offset, ebase + offset + size);
 }
 
 static char panic_null_cerr[] __cpuinitdata =
@@ -1536,6 +1560,15 @@ void __init trap_init(void)
 	extern char except_vec3_generic, except_vec3_r4000;
 	extern char except_vec4;
 	unsigned long i;
+	int rollback;
+
+	check_wait();
+	rollback = (cpu_wait == r4k_wait);
+
+#if defined(CONFIG_KGDB)
+	if (kgdb_early_setup)
+		return;	/* Already done */
+#endif
 
 	if (cpu_has_veic || cpu_has_vint)
 		ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
@@ -1595,7 +1628,7 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(0, handle_int);
+	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);
@@ -1659,6 +1692,8 @@ void __init trap_init(void)
 	signal32_init();
 #endif
 
-	flush_icache_range(ebase, ebase + 0x400);
+	local_flush_icache_range(ebase, ebase + 0x400);
 	flush_tlb_handlers();
+
+	sort_extable(__start___dbe_table, __stop___dbe_table);
 }
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index b5470ceb418..afb119f3568 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -36,6 +36,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		*(.text.*)
 		*(.fixup)
 		*(.gnu.warning)
 	} :text = 0
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index 8d7784122c1..edac9892c51 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -39,12 +39,14 @@
 #ifdef USE_DOUBLE
 
 #define LOAD   ld
+#define LOAD32 lwu
 #define ADD    daddu
 #define NBYTES 8
 
 #else
 
 #define LOAD   lw
+#define LOAD32 lw
 #define ADD    addu
 #define NBYTES 4
 
@@ -60,6 +62,14 @@
 	ADD	sum, v1;					\
 	.set	pop
 
+#define ADDC32(sum,reg)						\
+	.set	push;						\
+	.set	noat;						\
+	addu	sum, reg;					\
+	sltu	v1, sum, reg;					\
+	addu	sum, v1;					\
+	.set	pop
+
 #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)	\
 	LOAD	_t0, (offset + UNIT(0))(src);			\
 	LOAD	_t1, (offset + UNIT(1))(src);			\
@@ -132,7 +142,7 @@ LEAF(csum_partial)
 	beqz	t8, .Lqword_align
 	 andi	t8, src, 0x8
 
-	lw	t0, 0x00(src)
+	LOAD32	t0, 0x00(src)
 	LONG_SUBU	a1, a1, 0x4
 	ADDC(sum, t0)
 	PTR_ADDU	src, src, 0x4
@@ -211,7 +221,7 @@ LEAF(csum_partial)
 	LONG_SRL	t8, t8, 0x2
 
 .Lend_words:
-	lw	t0, (src)
+	LOAD32	t0, (src)
 	LONG_SUBU	t8, t8, 0x1
 	ADDC(sum, t0)
 	.set	reorder				/* DADDI_WAR */
@@ -230,6 +240,9 @@ LEAF(csum_partial)
 	/* Still a full word to go  */
 	ulw	t1, (src)
 	PTR_ADDIU	src, 4
+#ifdef USE_DOUBLE
+	dsll	t1, t1, 32			/* clear lower 32bit */
+#endif
 	ADDC(sum, t1)
 
 1:	move	t1, zero
@@ -280,7 +293,7 @@ LEAF(csum_partial)
 1:
 	.set	reorder
 	/* Add the passed partial csum.  */
-	ADDC(sum, a2)
+	ADDC32(sum, a2)
 	jr	ra
 	.set	noreorder
 	END(csum_partial)
@@ -681,7 +694,7 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	.set	pop
 1:
 	.set reorder
-	ADDC(sum, psum)
+	ADDC32(sum, psum)
 	jr	ra
 	.set noreorder
 
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index ed49ef01ac5..52e6c58c8de 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -24,6 +24,7 @@
 #include <asm/signal.h>
 #include <asm/uaccess.h>
 
+#include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 
 #define SIGNALLING_NAN 0x7ff800007ff80000LL
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 48731020ca0..44e8dd8106b 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,8 +3,7 @@
 #
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
-				   init.o pgtable.o tlbex.o tlbex-fault.o \
-				   uasm.o page.o
+				   init.o tlbex.o tlbex-fault.o uasm.o page.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 27a5b466c85..5500c20c79a 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -320,6 +320,7 @@ void __cpuinit r3k_cache_init(void)
 	flush_cache_range = r3k_flush_cache_range;
 	flush_cache_page = r3k_flush_cache_page;
 	flush_icache_range = r3k_flush_icache_range;
+	local_flush_icache_range = r3k_flush_icache_range;
 
 	flush_cache_sigtramp = r3k_flush_cache_sigtramp;
 	local_flush_data_cache_page = local_r3k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 71df3390c07..6e99665ae86 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -543,12 +543,8 @@ struct flush_icache_range_args {
 	unsigned long end;
 };
 
-static inline void local_r4k_flush_icache_range(void *args)
+static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
-	struct flush_icache_range_args *fir_args = args;
-	unsigned long start = fir_args->start;
-	unsigned long end = fir_args->end;
-
 	if (!cpu_has_ic_fills_f_dc) {
 		if (end - start >= dcache_size) {
 			r4k_blast_dcache();
@@ -564,6 +560,15 @@ static inline void local_r4k_flush_icache_range(void *args)
 		protected_blast_icache_range(start, end);
 }
 
+static inline void local_r4k_flush_icache_range_ipi(void *args)
+{
+	struct flush_icache_range_args *fir_args = args;
+	unsigned long start = fir_args->start;
+	unsigned long end = fir_args->end;
+
+	local_r4k_flush_icache_range(start, end);
+}
+
 static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
 	struct flush_icache_range_args args;
@@ -571,7 +576,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1);
 	instruction_hazard();
 }
 
@@ -1375,6 +1380,7 @@ void __cpuinit r4k_cache_init(void)
 	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
+	local_flush_icache_range	= local_r4k_flush_icache_range;
 
 #if defined(CONFIG_DMA_NONCOHERENT)
 	if (coherentio) {
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index a9f7f1f5e9b..f7c8f9ce39c 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -362,6 +362,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range	= (void *) tx39h_flush_icache_all;
 		flush_cache_page	= (void *) tx39h_flush_icache_all;
 		flush_icache_range	= (void *) tx39h_flush_icache_all;
+		local_flush_icache_range = (void *) tx39h_flush_icache_all;
 
 		flush_cache_sigtramp	= (void *) tx39h_flush_icache_all;
 		local_flush_data_cache_page	= (void *) tx39h_flush_icache_all;
@@ -390,6 +391,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range = tx39_flush_cache_range;
 		flush_cache_page = tx39_flush_cache_page;
 		flush_icache_range = tx39_flush_icache_range;
+		local_flush_icache_range = tx39_flush_icache_range;
 
 		flush_cache_sigtramp = tx39_flush_cache_sigtramp;
 		local_flush_data_cache_page = local_tx39_flush_data_cache_page;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 034e8506f6e..1eb7c71e3d6 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -29,6 +29,7 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
 void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
 	unsigned long pfn);
 void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 
 void (*__flush_cache_vmap)(void);
 void (*__flush_cache_vunmap)(void);
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index ae39dd88b9a..891312f8e5a 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -348,7 +348,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c
deleted file mode 100644
index 7dfa579ab24..00000000000
--- a/arch/mips/mm/pgtable.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-
-void show_mem(void)
-{
-#ifndef CONFIG_NEED_MULTIPLE_NODES  /* XXX(hch): later.. */
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		if (!pfn_valid(pfn))
-			continue;
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			highmem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-#endif
-}
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index a782549ac80..f0cf46adb97 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 		old_pagemask = read_c0_pagemask();
 		w = read_c0_wired();
 		write_c0_wired(w + 1);
-		if (read_c0_wired() != w + 1) {
-			printk("[tlbwired] No WIRED reg?\n");
-			return;
-		}
 		write_c0_index(w << 8);
 		write_c0_pagemask(pagemask);
 		write_c0_entryhi(entryhi);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 76da73a5ab3..979cf919728 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1273,10 +1273,10 @@ void __cpuinit build_tlb_refill_handler(void)
 
 void __cpuinit flush_tlb_handlers(void)
 {
-	flush_icache_range((unsigned long)handle_tlbl,
+	local_flush_icache_range((unsigned long)handle_tlbl,
 			   (unsigned long)handle_tlbl + sizeof(handle_tlbl));
-	flush_icache_range((unsigned long)handle_tlbs,
+	local_flush_icache_range((unsigned long)handle_tlbs,
 			   (unsigned long)handle_tlbs + sizeof(handle_tlbs));
-	flush_icache_range((unsigned long)handle_tlbm,
+	local_flush_icache_range((unsigned long)handle_tlbm,
 			   (unsigned long)handle_tlbm + sizeof(handle_tlbm));
 }
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index f8064446e81..3b7dd722c32 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -13,7 +13,6 @@ obj-y				:= malta-amon.o malta-cmdline.o \
 
 obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
-obj-$(CONFIG_KGDB)		+= malta-kgdb.o
 
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index c0653021a17..4832af25166 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -37,15 +37,6 @@
 
 #include <asm/mips-boards/malta.h>
 
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
 int prom_argc;
 int *_prom_argv, *_prom_envp;
 
@@ -173,51 +164,6 @@ static void __init console_config(void)
 }
 #endif
 
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
-	extern int (*generic_putDebugChar)(char);
-	extern char (*generic_getDebugChar)(void);
-	char *argptr;
-	int line, speed;
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		argptr += strlen("kgdb=ttyS");
-		if (*argptr != '0' && *argptr != '1')
-			printk("KGDB: Unknown serial line /dev/ttyS%c, "
-			       "falling back to /dev/ttyS1\n", *argptr);
-		line = *argptr == '0' ? 0 : 1;
-		printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
-		speed = 0;
-		if (*++argptr == ',')
-		{
-			int c;
-			while ((c = *++argptr) && ('0' <= c && c <= '9'))
-				speed = speed * 10 + c - '0';
-		}
-		{
-			speed = rs_kgdb_hook(line, speed);
-			generic_putDebugChar = rs_putDebugChar;
-			generic_getDebugChar = rs_getDebugChar;
-		}
-
-		pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
-		        "session, please connect your debugger\n",
-		        line ? 1 : 0, speed);
-
-		{
-			char *s;
-			for (s = "Please connect GDB to this port\r\n"; *s; )
-				generic_putDebugChar(*s++);
-		}
-
-		/* Breakpoint is invoked after interrupts are initialised */
-	}
-}
-#endif
-
 static void __init mips_nmi_setup(void)
 {
 	void *base;
diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c
deleted file mode 100644
index 6a1854de457..00000000000
--- a/arch/mips/mti-malta/malta-kgdb.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
-	SERIAL_PORT_DFNS	/* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-	return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-				int value)
-{
-	outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
-	int t;
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port = ser->port;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_in(&kdb_port_info, UART_LSR);
-	serial_in(&kdb_port_info, UART_RX);
-	serial_in(&kdb_port_info, UART_IIR);
-	serial_in(&kdb_port_info, UART_MSR);
-
-	/*
-	 * Now, initialize the UART
-	 */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);	/* reset DLAB */
-	if (kdb_port_info.flags & ASYNC_FOURPORT) {
-		kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-		t = UART_MCR_DTR | UART_MCR_OUT1;
-	} else {
-		kdb_port_info.MCR
-			= UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-		t = UART_MCR_DTR | UART_MCR_RTS;
-	}
-
-	kdb_port_info.MCR = t;		/* no interrupts, please */
-	serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	if (speed == 0)
-		speed = 9600;
-
-	t = kdb_port_info.state->baud_base / speed;
-	/* set DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-	serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-	serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-	/* reset DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
-	return speed;
-}
-
-int putDebugChar(char c)
-{
-	return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
-	return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(&kdb_port_info, UART_TX, c);
-
-	return 1;
-}
-
-char rs_getDebugChar(void)
-{
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-		;
-
-	return serial_in(&kdb_port_info, UART_RX);
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54936c..dc78b8983ee 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -199,10 +199,6 @@ void __init plat_mem_setup(void)
 	 */
 	enable_dma(4);
 
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-
 #ifdef CONFIG_DMA_COHERENT
 	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
 		panic("Hardware DMA cache coherency not supported");
diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile
index 31cc1a5cec3..dd9e7b1f7fd 100644
--- a/arch/mips/nxp/pnx8550/common/Makefile
+++ b/arch/mips/nxp/pnx8550/common/Makefile
@@ -24,6 +24,5 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c
deleted file mode 100644
index ad4624f6d9b..00000000000
--- a/arch/mips/nxp/pnx8550/common/gdb_hook.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port  = tty_no;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-
-	/*
-	 * Now, initialize the UART
-	 */
-	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
-	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
-	/* Wait until FIFO not full */
-	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
-		;
-	/* Send one char */
-	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	char ch;
-
-	/* Wait until there is a char in the FIFO */
-	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
-					IP3106_UART_FIFO_RXFIFO) >> 8))
-		;
-	/* Read one char */
-	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
-		IP3106_UART_FIFO_RBRTHR;
-	/* Advance the RX FIFO read pointer */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
-	return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
-	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c
index aad03429a5e..f080f114a1b 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/nxp/pnx8550/common/int.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index 18b125e3b65..acf1fa88944 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -22,7 +22,6 @@
 #include <linux/random.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 92d764c9770..2aed50fef10 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
 		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
 	}
 
-#ifdef CONFIG_KGDB
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		int line;
-		argptr += strlen("kgdb=ttyS");
-		line = *argptr == '0' ? 0 : 1;
-		rs_kgdb_hook(line);
-		pr_info("KGDB: Using ttyS%i for session, "
-		        "please connect your debugger\n", line ? 1 : 0);
-	}
-#endif
 	return;
 }
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 57e34cafa49..c8c32f417b6 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
+obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
@@ -49,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-rbtx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
+obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c
new file mode 100644
index 00000000000..75b90dcb7a0
--- /dev/null
+++ b/arch/mips/pci/fixup-rc32434.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+static int __devinitdata irq_map[2][12] = {
+	{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},
+	{0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3}
+};
+
+int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = 0;
+
+	if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12)
+		irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)];
+
+	return irq + GROUP4_IRQ_BASE + 4;
+}
+
+static void rc32434_pci_early_fixup(struct pci_dev *dev)
+{
+	if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) {
+		/* disable prefetched memory range */
+		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
+		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
+
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+	}
+}
+
+/*
+ * The fixup applies to both the IDT and VIA devices present on the board
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, rc32434_pci_early_fixup);
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/ops-rc32434.c b/arch/mips/pci/ops-rc32434.c
new file mode 100644
index 00000000000..d1f8fa210ca
--- /dev/null
+++ b/arch/mips/pci/ops-rc32434.c
@@ -0,0 +1,207 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     pci_ops for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include <asm/cpu.h>
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+
+#define PCI_CFG_SET(bus, slot, func, off) \
+	(rc32434_pci->pcicfga = (0x80000000 | \
+				((bus) << 16) | ((slot)<<11) | \
+				((func)<<8) | (off)))
+
+static inline int config_access(unsigned char access_type,
+				struct pci_bus *bus, unsigned int devfn,
+				unsigned char where, u32 *data)
+{
+	unsigned int slot = PCI_SLOT(devfn);
+	u8 func = PCI_FUNC(devfn);
+
+	/* Setup address */
+	PCI_CFG_SET(bus->number, slot, func, where);
+	rc32434_sync();
+
+	if (access_type == PCI_ACCESS_WRITE)
+		rc32434_pci->pcicfgd = *data;
+	else
+		*data = rc32434_pci->pcicfgd;
+
+	rc32434_sync();
+
+	return 0;
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+			    int where, u8 *val)
+{
+	u32 data;
+	int ret;
+
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+	*val = (data >> ((where & 3) << 3)) & 0xff;
+	return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+			    int where, u16 *val)
+{
+	u32 data;
+	int ret;
+
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+	*val = (data >> ((where & 3) << 3)) & 0xffff;
+	return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+			     int where, u32 *val)
+{
+	int ret;
+	int delay = 1;
+
+	/*
+	 * Don't scan too far, else there will be errors with plugged in
+	 * daughterboard (rb564).
+	 */
+	if (bus->number == 0 && PCI_SLOT(devfn) > 21)
+		return 0;
+
+retry:
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+
+	/*
+	 * Certain devices react delayed at device scan time, this
+	 * gives them time to settle
+	 */
+	if (where == PCI_VENDOR_ID) {
+		if (ret == 0xffffffff || ret == 0x00000000 ||
+		    ret == 0x0000ffff || ret == 0xffff0000) {
+			if (delay > 4)
+				return 0;
+			delay *= 2;
+			msleep(delay);
+			goto retry;
+		}
+	}
+
+	return ret;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
+		  u8 val)
+{
+	u32 data = 0;
+
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+
+	data = (data & ~(0xff << ((where & 3) << 3))) |
+	    (val << ((where & 3) << 3));
+
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
+		  u16 val)
+{
+	u32 data = 0;
+
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+
+	data = (data & ~(0xffff << ((where & 3) << 3))) |
+	    (val << ((where & 3) << 3));
+
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
+		   u32 val)
+{
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 *val)
+{
+	switch (size) {
+	case 1:
+		return read_config_byte(bus, devfn, where, (u8 *) val);
+	case 2:
+		return read_config_word(bus, devfn, where, (u16 *) val);
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2:
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+struct pci_ops rc32434_pci_ops = {
+	.read = pci_config_read,
+	.write = pci_config_write,
+};
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 8a17a39e5bf..31c15019659 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -37,45 +37,48 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx3927.h>
 
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
-	unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
 {
-	if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
-	                      ((dev_fn & 0xff) << 0x08) |
-	                      (where & 0xfc);
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	tx3927_pcicptr->ica =
+		((bus->number & 0xff) << 0x10) |
+		((devfn & 0xff) << 0x08) |
+		(where & 0xfc) | (bus->parent ? 1 : 0);
 
 	/* clear M_ABORT and Disable M_ABORT Int. */
 	tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 	tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return PCIBIOS_SUCCESSFUL;
+	return 0;
 }
 
 static inline int check_abort(void)
 {
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
 		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+		/* flush write buffer */
+		iob();
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	}
 	return PCIBIOS_SUCCESSFUL;
 }
 
 static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where)) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
 
 	switch (size) {
 	case 1:
@@ -97,11 +100,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
 	case 1:
@@ -117,11 +117,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		tx3927_pcicptr->icd = cpu_to_le32(val);
 	}
 
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
-		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
-		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
 	return check_abort();
 }
 
@@ -202,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel,
 		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
 	local_irq_restore(flags);
 }
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+		       regs->cp0_epc);
+		printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+		       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+		tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+		tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+			tx3927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX3927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index c6b49bccd27..5989e747527 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -16,6 +16,8 @@
  * option) any later version.
  */
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx4927pcic.h>
 
 static struct {
@@ -85,6 +87,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
 		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
 			     | (PCI_STATUS_REC_MASTER_ABORT << 16),
 			     &pcicptr->pcistatus);
+		/* flush write buffer */
+		iob();
 		code = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return code;
@@ -192,6 +196,28 @@ static struct {
 	.gbwc = 0xfe0,	/* 4064 GBUSCLK for CCFG.GTOT=0b11 */
 };
 
+char *__devinit tx4927_pcibios_setup(char *str)
+{
+	unsigned long val;
+
+	if (!strncmp(str, "trdyto=", 7)) {
+		if (strict_strtoul(str + 7, 0, &val) == 0)
+			tx4927_pci_opts.trdyto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "retryto=", 8)) {
+		if (strict_strtoul(str + 8, 0, &val) == 0)
+			tx4927_pci_opts.retryto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "gbwc=", 5)) {
+		if (strict_strtoul(str + 5, 0, &val) == 0)
+			tx4927_pci_opts.gbwc = val;
+		return NULL;
+	}
+	return str;
+}
+
 void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
 			      struct pci_controller *channel, int extarb)
 {
@@ -406,3 +432,95 @@ void tx4927_report_pcic_status(void)
 			tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
 	}
 }
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+	__u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+	printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+	for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+		if (i % 32 == 0) {
+			printk(KERN_CONT "\n");
+			printk(KERN_INFO "%04x:", i);
+		}
+		/* skip registers with side-effects */
+		if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+			printk(KERN_CONT " XXXXXXXX");
+			continue;
+		}
+		printk(KERN_CONT " %08x", __raw_readl(preg));
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+	}
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	struct tx4927_pcic_reg __iomem *pcicptr =
+		(struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+		       (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+		tx4927_report_pcic_status1(pcicptr);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+			     &pcicptr->pcistatus);
+		__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+		__raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+		__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	tx4927_dump_pcic_settings1(pcicptr);
+	panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+	if (!pcicptr)
+		return;
+	if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		/*
+		 * swap reqBP and reqXP (raise priority of SLC90E66).
+		 * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+		 * PCI Backplane board.
+		 */
+		__raw_writel(0x72543610, &pcicptr->pbareqport);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Use Fixed ParkMaster (required by SLC90E66) */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+			     TX4927_PCIC_PBACFG_PBAEN,
+			     &pcicptr->pbacfg);
+		printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+		       __raw_readl(&pcicptr->pbareqport));
+	}
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	tx4927_quirk_slc90e66_bridge);
+#endif
diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c
new file mode 100644
index 00000000000..bea9b6cdfdb
--- /dev/null
+++ b/arch/mips/pci/pci-bcm47xx.c
@@ -0,0 +1,60 @@
+/*
+ *  Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return 0;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	int res;
+	u8 slot, pin;
+
+	res = ssb_pcibios_plat_dev_init(dev);
+	if (res < 0) {
+		printk(KERN_ALERT "PCI: Failed to init device %s\n",
+		       pci_name(dev));
+		return res;
+	}
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+	slot = PCI_SLOT(dev->devfn);
+	res = ssb_pcibios_map_irq(dev, slot, pin);
+
+	/* IRQ-0 and IRQ-1 are software interrupts. */
+	if (res < 2) {
+		printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
+		       pci_name(dev));
+		return res;
+	}
+
+	dev->irq = res;
+	return 0;
+}
+
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index ce92f82b16d..f97ab146101 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -143,25 +143,47 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
  */
 int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
+	return 0;
+}
+
+/* Most MIPS systems have straight-forward swizzling needs.  */
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+	return (((pin - 1) + slot) % 4) + 1;
+}
+
+static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
+{
+	while (dev->bus->parent) {
+		/* Move up the chain of bridges. */
+		dev = dev->bus->self;
+	}
+
+	return dev;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
 	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
-	int irq = bc->pci_int[slot];
+	struct pci_dev *rdev = bridge_root_dev(dev);
+	int slot = PCI_SLOT(rdev->devfn);
+	int irq;
 
+	irq = bc->pci_int[slot];
 	if (irq == -1) {
-		irq = bc->pci_int[slot] = request_bridge_irq(bc);
+		irq = request_bridge_irq(bc);
 		if (irq < 0)
-			panic("Can't allocate interrupt for PCI device %s\n",
-			      pci_name(dev));
+			return irq;
+
+		bc->pci_int[slot] = irq;
 	}
 
 	irq_to_bridge[irq] = bc;
 	irq_to_slot[irq] = slot;
 
-	return irq;
-}
+	dev->irq = irq;
 
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
 	return 0;
 }
 
@@ -205,6 +227,7 @@ int pcibus_to_node(struct pci_bus *bus)
 
 	return bc->nasid;
 }
+EXPORT_SYMBOL(pcibus_to_node);
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
 	pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
new file mode 100644
index 00000000000..1c2821e2f49
--- /dev/null
+++ b/arch/mips/pci/pci-rc32434.c
@@ -0,0 +1,221 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     PCI initialization for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+/* define an unsigned array for the PCI registers */
+static unsigned int korina_cnfg_regs[25] = {
+	KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4,
+	KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8,
+	KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12,
+	KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16,
+	KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20,
+	KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24
+};
+static struct resource rc32434_res_pci_mem1;
+static struct resource rc32434_res_pci_mem2;
+
+static struct resource rc32434_res_pci_mem1 = {
+	.name = "PCI MEM1",
+	.start = 0x50000000,
+	.end = 0x5FFFFFFF,
+	.flags = IORESOURCE_MEM,
+	.parent = &rc32434_res_pci_mem1,
+	.sibling = NULL,
+	.child = &rc32434_res_pci_mem2
+};
+
+static struct resource rc32434_res_pci_mem2 = {
+	.name = "PCI Mem2",
+	.start = 0x60000000,
+	.end = 0x6FFFFFFF,
+	.flags = IORESOURCE_MEM,
+	.parent = &rc32434_res_pci_mem1,
+	.sibling = NULL,
+	.child = NULL
+};
+
+static struct resource rc32434_res_pci_io1 = {
+	.name = "PCI I/O1",
+	.start = 0x18800000,
+	.end = 0x188FFFFF,
+	.flags = IORESOURCE_IO,
+};
+
+extern struct pci_ops rc32434_pci_ops;
+
+#define PCI_MEM1_START	PCI_ADDR_START
+#define PCI_MEM1_END	(PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1)
+#define PCI_MEM2_START	(PCI_ADDR_START + CPUTOPCI_MEM_WIN)
+#define PCI_MEM2_END	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN)  - 1)
+#define PCI_IO1_START	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN))
+#define PCI_IO1_END 							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN - 1)
+#define PCI_IO2_START							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN)
+#define PCI_IO2_END 							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) - 1)
+
+struct pci_controller rc32434_controller2;
+
+struct pci_controller rc32434_controller = {
+	.pci_ops = &rc32434_pci_ops,
+	.mem_resource = &rc32434_res_pci_mem1,
+	.io_resource = &rc32434_res_pci_io1,
+	.mem_offset = 0,
+	.io_offset = 0,
+
+};
+
+#ifdef __MIPSEB__
+#define PCI_ENDIAN_FLAG PCILBAC_sb_m
+#else
+#define PCI_ENDIAN_FLAG 0
+#endif
+
+static int __init rc32434_pcibridge_init(void)
+{
+	unsigned int pcicvalue, pcicdata = 0;
+	unsigned int dummyread, pcicntlval;
+	int loopCount;
+	unsigned int pci_config_addr;
+
+	pcicvalue = rc32434_pci->pcic;
+	pcicvalue = (pcicvalue >> PCIM_SHFT) & PCIM_BIT_LEN;
+	if (!((pcicvalue == PCIM_H_EA) ||
+	      (pcicvalue == PCIM_H_IA_FIX) ||
+	      (pcicvalue == PCIM_H_IA_RR))) {
+		pr_err(KERN_ERR "PCI init error!!!\n");
+		/* Not in Host Mode, return ERROR */
+		return -1;
+	}
+	/* Enables the Idle Grant mode, Arbiter Parking */
+	pcicdata |= (PCI_CTL_IGM | PCI_CTL_EAP | PCI_CTL_EN);
+	rc32434_pci->pcic = pcicdata;	/* Enable the PCI bus Interface */
+	/* Zero out the PCI status & PCI Status Mask */
+	for (;;) {
+		pcicdata = rc32434_pci->pcis;
+		if (!(pcicdata & PCI_STAT_RIP))
+			break;
+	}
+
+	rc32434_pci->pcis = 0;
+	rc32434_pci->pcism = 0xFFFFFFFF;
+	/* Zero out the PCI decoupled registers */
+	rc32434_pci->pcidac = 0;	/*
+					 * disable PCI decoupled accesses at
+					 * initialization
+					 */
+	rc32434_pci->pcidas = 0;	/* clear the status */
+	rc32434_pci->pcidasm = 0x0000007F;	/* Mask all the interrupts */
+	/* Mask PCI Messaging Interrupts */
+	rc32434_pci_msg->pciiic = 0;
+	rc32434_pci_msg->pciiim = 0xFFFFFFFF;
+	rc32434_pci_msg->pciioic = 0;
+	rc32434_pci_msg->pciioim = 0;
+
+
+	/* Setup PCILB0 as Memory Window */
+	rc32434_pci->pcilba[0].address = (unsigned int) (PCI_ADDR_START);
+
+	/* setup the PCI map address as same as the local address */
+
+	rc32434_pci->pcilba[0].mapping = (unsigned int) (PCI_ADDR_START);
+
+
+	/* Setup PCILBA1 as MEM */
+	rc32434_pci->pcilba[0].control =
+	    (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[0].control;	/* flush the CPU write Buffers */
+	rc32434_pci->pcilba[1].address = 0x60000000;
+	rc32434_pci->pcilba[1].mapping = 0x60000000;
+
+	/* setup PCILBA2 as IO Window */
+	rc32434_pci->pcilba[1].control =
+	    (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[1].control;	/* flush the CPU write Buffers */
+	rc32434_pci->pcilba[2].address = 0x18C00000;
+	rc32434_pci->pcilba[2].mapping = 0x18FFFFFF;
+
+	/* setup PCILBA2 as IO Window */
+	rc32434_pci->pcilba[2].control =
+	    (((SIZE_4MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[2].control;	/* flush the CPU write Buffers */
+
+	/* Setup PCILBA3 as IO Window */
+	rc32434_pci->pcilba[3].address = 0x18800000;
+	rc32434_pci->pcilba[3].mapping = 0x18800000;
+	rc32434_pci->pcilba[3].control =
+	    ((((SIZE_1MB & 0x1ff) << PCI_LBAC_SIZE_BIT) | PCI_LBAC_MSI) |
+	     PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[3].control;	/* flush the CPU write Buffers */
+
+	pci_config_addr = (unsigned int) (0x80000004);
+	for (loopCount = 0; loopCount < 24; loopCount++) {
+		rc32434_pci->pcicfga = pci_config_addr;
+		dummyread = rc32434_pci->pcicfga;
+		rc32434_pci->pcicfgd = korina_cnfg_regs[loopCount];
+		dummyread = rc32434_pci->pcicfgd;
+		pci_config_addr += 4;
+	}
+	rc32434_pci->pcitc =
+	    (unsigned int) ((PCITC_RTIMER_VAL & 0xff) << PCI_TC_RTIMER_BIT) |
+	    ((PCITC_DTIMER_VAL & 0xff) << PCI_TC_DTIMER_BIT);
+
+	pcicntlval = rc32434_pci->pcic;
+	pcicntlval &= ~PCI_CTL_TNR;
+	rc32434_pci->pcic = pcicntlval;
+	pcicntlval = rc32434_pci->pcic;
+
+	return 0;
+}
+
+static int __init rc32434_pci_init(void)
+{
+	pr_info("PCI: Initializing PCI\n");
+
+	ioport_resource.start = rc32434_res_pci_io1.start;
+	ioport_resource.end = rc32434_res_pci_io1.end;
+
+	rc32434_pcibridge_init();
+
+	register_pci_controller(&rc32434_controller);
+	rc32434_sync();
+
+	return 0;
+}
+
+arch_initcall(rc32434_pci_init);
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index 27e86a09dd4..aaa90059679 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
@@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void)
 		pciclk = -1;
 	return pciclk;
 }
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index e5375511c2b..60e2c52c2c5 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
@@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
 	}
 	return -1;
 }
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index d7d6cb063d2..c7fe6ec621e 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -204,7 +204,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
@@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 #endif
 
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
 {
+	if (pcibios_plat_setup)
+		return pcibios_plat_setup(str);
 	return str;
 }
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 9de34302e5f..f7261628d8a 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -38,68 +38,6 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val = (uint32_t)c;
-
-	local_irq_disable();
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	uart[0] = val;
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	local_irq_enable();
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val;
-
-	while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
-	val = uart[0];
-
-	return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
-	unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
-	/* Enable FIFOs */
-	writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
-		(char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
-	/* Select brtc divisor */
-	writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Store divisor lsb */
-	writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
-	/* Store divisor msb */
-	writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
-	/* Set 8N1 mode */
-	writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Disable flow control */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
-	/* Disable receive interrupt(!) */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
 void __init msp_serial_setup(void)
 {
 	char    *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
 		case MACH_MSP7120_FPGA:
 			/* Enable UART1 on MSP4200 and MSP7120 */
 			*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
-			/* Initialize UART1 for kgdb since PMON doesn't */
-			if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
-				if( mips_machtype == MACH_MSP4200_FPGA
-				 || mips_machtype == MACH_MSP7120_FPGA )
-					initDebugPort(uartclk, 19200);
-				else
-					initDebugPort(uartclk, 57600);
-			}
-#endif
 			break;
 
 		default:
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index 8fd9a04e353..b16f95c3df6 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -4,7 +4,6 @@
 
 obj-y    += irq.o prom.o py-console.o setup.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_SMP)		+= smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644
index 6362c702e38..00000000000
--- a/arch/mips/pmc-sierra/yosemite/dbg_io.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define	YOSEMITE_BAUD_2400	2400
-#define	YOSEMITE_BAUD_4800	4800
-#define	YOSEMITE_BAUD_9600	9600
-#define	YOSEMITE_BAUD_19200	19200
-#define	YOSEMITE_BAUD_38400	38400
-#define	YOSEMITE_BAUD_57600	57600
-#define	YOSEMITE_BAUD_115200	115200
-
-#define	YOSEMITE_PARITY_NONE	0
-#define	YOSEMITE_PARITY_ODD	0x08
-#define	YOSEMITE_PARITY_EVEN	0x18
-#define	YOSEMITE_PARITY_MARK	0x28
-#define	YOSEMITE_PARITY_SPACE	0x38
-
-#define	YOSEMITE_DATA_5BIT	0x0
-#define	YOSEMITE_DATA_6BIT	0x1
-#define	YOSEMITE_DATA_7BIT	0x2
-#define	YOSEMITE_DATA_8BIT	0x3
-
-#define	YOSEMITE_STOP_1BIT	0x0
-#define	YOSEMITE_STOP_2BIT	0x4
-
-/* This is crucial */
-#define	SERIAL_REG_OFS		0x1
-
-#define	SERIAL_RCV_BUFFER	0x0
-#define	SERIAL_TRANS_HOLD	0x0
-#define	SERIAL_SEND_BUFFER	0x0
-#define	SERIAL_INTR_ENABLE	(1 * SERIAL_REG_OFS)
-#define	SERIAL_INTR_ID		(2 * SERIAL_REG_OFS)
-#define	SERIAL_DATA_FORMAT	(3 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_CONTROL	(3 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_CONTROL	(4 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_OUTPUT	(4 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_STATUS	(5 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_STATUS	(6 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_INPUT	(6 * SERIAL_REG_OFS)
-#define	SERIAL_SCRATCH_PAD	(7 * SERIAL_REG_OFS)
-
-#define	SERIAL_DIVISOR_LSB	(0 * SERIAL_REG_OFS)
-#define	SERIAL_DIVISOR_MSB	(1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define	SERIAL_READ(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs)))
-
-#define	SERIAL_WRITE(ofs, val)		((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define	SERIAL_READ_1(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs)))
-
-#define	SERIAL_WRITE_1(ofs, val)	((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
-		divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
-		SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
-			       (divisor & 0xff00) >> 8);
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
-		       YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
-	/* Enable Interrupts */
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
-	       unsigned char stop)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
-		divisor = TITAN_SERIAL_BASE_BAUD / baud;
-		SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
-	return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
-	SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
-	return 1;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 4decc280786..5f673eba142 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
 	}
 }
 
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
 /*
  * Initialize the next level interrupt handler
  */
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
 
-#ifdef CONFIG_KGDB
-	/* At this point, initialize the second serial port */
-	init_second_port();
-#endif
-
 #ifdef CONFIG_GDB_CONSOLE
 	register_gdb_console();
 #endif
diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile
new file mode 100644
index 00000000000..8f0b6b6a162
--- /dev/null
+++ b/arch/mips/rb532/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the RB532 board specific parts of the kernel
+#
+
+obj-y	 += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
new file mode 100644
index 00000000000..82ab395efa3
--- /dev/null
+++ b/arch/mips/rb532/devices.c
@@ -0,0 +1,321 @@
+/*
+ *  RouterBoard 500 Platform devices
+ *
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/dma.h>
+#include <asm/mach-rc32434/dma_v.h>
+#include <asm/mach-rc32434/eth.h>
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/integ.h>
+#include <asm/mach-rc32434/gpio.h>
+
+#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+
+#define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+#define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+
+/* NAND definitions */
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+static struct resource korina_dev0_res[] = {
+	{
+		.name = "korina_regs",
+		.start = ETH0_BASE_ADDR,
+		.end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
+		.flags = IORESOURCE_MEM,
+	 }, {
+		.name = "korina_rx",
+		.start = ETH0_DMA_RX_IRQ,
+		.end = ETH0_DMA_RX_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_tx",
+		.start = ETH0_DMA_TX_IRQ,
+		.end = ETH0_DMA_TX_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_ovr",
+		.start = ETH0_RX_OVR_IRQ,
+		.end = ETH0_RX_OVR_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_und",
+		.start = ETH0_TX_UND_IRQ,
+		.end = ETH0_TX_UND_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_dma_rx",
+		.start = ETH0_RX_DMA_ADDR,
+		.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	 }, {
+		.name = "korina_dma_tx",
+		.start = ETH0_TX_DMA_ADDR,
+		.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	 }
+};
+
+static struct korina_device korina_dev0_data = {
+	.name = "korina0",
+	.mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
+};
+
+static struct platform_device korina_dev0 = {
+	.id = 0,
+	.name = "korina",
+	.dev.platform_data = &korina_dev0_data,
+	.resource = korina_dev0_res,
+	.num_resources = ARRAY_SIZE(korina_dev0_res),
+};
+
+#define CF_GPIO_NUM 13
+
+static struct resource cf_slot0_res[] = {
+	{
+		.name = "cf_membase",
+		.flags = IORESOURCE_MEM
+	}, {
+		.name = "cf_irq",
+		.start = (8 + 4 * 32 + CF_GPIO_NUM),	/* 149 */
+		.end = (8 + 4 * 32 + CF_GPIO_NUM),
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct cf_device cf_slot0_data = {
+	.gpio_pin = 13
+};
+
+static struct platform_device cf_slot0 = {
+	.id = 0,
+	.name = "pata-rb532-cf",
+	.dev.platform_data = &cf_slot0_data,
+	.resource = cf_slot0_res,
+	.num_resources = ARRAY_SIZE(cf_slot0_res),
+};
+
+/* Resources and device for NAND */
+static int rb532_dev_ready(struct mtd_info *mtd)
+{
+	return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	unsigned char orbits, nandbits;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		orbits = (ctrl & NAND_CLE) << 1;
+		orbits |= (ctrl & NAND_ALE) >> 1;
+
+		nandbits = (~ctrl & NAND_CLE) << 1;
+		nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+		set_latch_u5(orbits, nandbits);
+	}
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static struct resource nand_slot0_res[] = {
+	[0] = {
+		.name = "nand_membase",
+		.flags = IORESOURCE_MEM
+	}
+};
+
+static struct platform_nand_data rb532_nand_data = {
+	.ctrl.dev_ready = rb532_dev_ready,
+	.ctrl.cmd_ctrl	= rb532_cmd_ctrl,
+};
+
+static struct platform_device nand_slot0 = {
+	.name = "gen_nand",
+	.id = -1,
+	.resource = nand_slot0_res,
+	.num_resources = ARRAY_SIZE(nand_slot0_res),
+	.dev.platform_data = &rb532_nand_data,
+};
+
+static struct mtd_partition rb532_partition_info[] = {
+	{
+		.name = "Routerboard NAND boot",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device rb532_led = {
+	.name = "rb532-led",
+	.id = 0,
+};
+
+static struct gpio_keys_button rb532_gpio_btn[] = {
+	{
+		.gpio = 1,
+		.code = BTN_0,
+		.desc = "S1",
+		.active_low = 1,
+	}
+};
+
+static struct gpio_keys_platform_data rb532_gpio_btn_data = {
+	.buttons = rb532_gpio_btn,
+	.nbuttons = ARRAY_SIZE(rb532_gpio_btn),
+};
+
+static struct platform_device rb532_button = {
+	.name 	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rb532_gpio_btn_data,
+	}
+};
+
+static struct resource rb532_wdt_res[] = {
+	{
+		.name = "rb532_wdt_res",
+		.start = INTEG0_BASE_ADDR,
+		.end = INTEG0_BASE_ADDR + sizeof(struct integ),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device rb532_wdt = {
+	.name 		= "rc32434_wdt",
+	.id 		= -1,
+	.resource 	= rb532_wdt_res,
+	.num_resources	= ARRAY_SIZE(rb532_wdt_res),
+};
+
+static struct platform_device *rb532_devs[] = {
+	&korina_dev0,
+	&nand_slot0,
+	&cf_slot0,
+	&rb532_led,
+	&rb532_button,
+	&rb532_wdt
+};
+
+static void __init parse_mac_addr(char *macstr)
+{
+	int i, j;
+	unsigned char result, value;
+
+	for (i = 0; i < 6; i++) {
+		result = 0;
+
+		if (i != 5 && *(macstr + 2) != ':')
+			return;
+
+		for (j = 0; j < 2; j++) {
+			if (isxdigit(*macstr)
+			    && (value =
+				isdigit(*macstr) ? *macstr -
+				'0' : toupper(*macstr) - 'A' + 10) < 16) {
+				result = result * 16 + value;
+				macstr++;
+			} else
+				return;
+		}
+
+		macstr++;
+		korina_dev0_data.mac[i] = result;
+	}
+}
+
+
+/* NAND definitions */
+#define NAND_CHIP_DELAY	25
+
+static void __init rb532_nand_setup(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		set_latch_u5(LO_FOFF | LO_CEX,
+				LO_ULED | LO_ALE | LO_CLE | LO_WPX);
+		break;
+	default:
+		set_latch_u5(LO_WPX | LO_FOFF | LO_CEX,
+				LO_ULED | LO_ALE | LO_CLE);
+		break;
+	}
+
+	/* Setup NAND specific settings */
+	rb532_nand_data.chip.nr_chips = 1;
+	rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
+	rb532_nand_data.chip.partitions = rb532_partition_info;
+	rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+	rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+}
+
+
+static int __init plat_setup_devices(void)
+{
+	/* Look for the CF card reader */
+	if (!readl(IDT434_REG_BASE + DEV1MASK))
+		rb532_devs[1] = NULL;
+	else {
+		cf_slot0_res[0].start =
+		    readl(IDT434_REG_BASE + DEV1BASE);
+		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
+	}
+
+	/* Read the NAND resources from the device controller */
+	nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
+	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+
+	/* Initialise the NAND device */
+	rb532_nand_setup();
+
+	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+}
+
+static int __init setup_kmac(char *s)
+{
+	printk(KERN_INFO "korina mac = %s\n", s);
+	parse_mac_addr(s);
+	return 0;
+}
+
+__setup("kmac=", setup_kmac);
+
+arch_initcall(plat_setup_devices);
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
new file mode 100644
index 00000000000..00a1c7877bf
--- /dev/null
+++ b/arch/mips/rb532/gpio.c
@@ -0,0 +1,221 @@
+/*
+ *  Miscellaneous functions for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Phil Sutter <n0-1@freewrt.org>
+ *  Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-rc32434/rb.h>
+
+struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
+EXPORT_SYMBOL(rb532_gpio_reg0);
+
+struct mpmc_device dev3;
+
+static struct resource rb532_gpio_reg0_res[] = {
+	{
+		.name 	= "gpio_reg0",
+		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
+		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+		.flags 	= IORESOURCE_MEM,
+	}
+};
+
+static struct resource rb532_dev3_ctl_res[] = {
+	{
+		.name	= "dev3_ctl",
+		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
+		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
+{
+	unsigned long flags;
+	unsigned data;
+	unsigned i = 0;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+	for (i = 0; i != len; ++i) {
+		if (val & (1 << i))
+			data |= (1 << (i + bit));
+		else
+			data &= ~(1 << (i + bit));
+	}
+	writel(data, (IDT434_REG_BASE + reg_offs));
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_434_reg);
+
+unsigned get_434_reg(unsigned reg_offs)
+{
+	return readl(IDT434_REG_BASE + reg_offs);
+}
+EXPORT_SYMBOL(get_434_reg);
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	dev3.state = (dev3.state | or_mask) & ~nand_mask;
+	writel(dev3.state, &dev3.base);
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+	return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
+int rb532_gpio_get_value(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_value);
+
+void rb532_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+
+	writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+}
+EXPORT_SYMBOL(rb532_gpio_set_value);
+
+int rb532_gpio_direction_input(unsigned gpio)
+{
+	writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
+	       (void *)&rb532_gpio_reg0->gpiocfg);
+
+	return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_input);
+
+int rb532_gpio_direction_output(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+	writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
+	       (void *)&rb532_gpio_reg0->gpiocfg);
+
+	return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_output);
+
+void rb532_gpio_set_int_level(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_level);
+
+int rb532_gpio_get_int_level(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_level);
+
+void rb532_gpio_set_int_status(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpioistat);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_status);
+
+int rb532_gpio_get_int_status(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_status);
+
+void rb532_gpio_set_func(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpiofunc);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+}
+EXPORT_SYMBOL(rb532_gpio_set_func);
+
+int rb532_gpio_get_func(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_func);
+
+int __init rb532_gpio_init(void)
+{
+	rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
+				rb532_gpio_reg0_res[0].end -
+				rb532_gpio_reg0_res[0].start);
+
+	if (!rb532_gpio_reg0) {
+		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
+		return -ENXIO;
+	}
+
+	dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
+				rb532_dev3_ctl_res[0].end -
+				rb532_dev3_ctl_res[0].start);
+
+	if (!dev3.base) {
+		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+arch_initcall(rb532_gpio_init);
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
new file mode 100644
index 00000000000..c0d0f950caf
--- /dev/null
+++ b/arch/mips/rb532/irq.c
@@ -0,0 +1,209 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              stevel@mvista.com or source@mvista.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+struct intr_group {
+	u32 mask;	/* mask of valid bits in pending/mask registers */
+	volatile u32 *base_addr;
+};
+
+#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
+
+#if (NR_IRQS < RC32434_NR_IRQS)
+#error Too little irqs defined. Did you override <asm/irq.h> ?
+#endif
+
+static const struct intr_group intr_group[NUM_INTR_GROUPS] = {
+	{
+		.mask	= 0x0000efff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x00001fff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x00000007,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x0003ffff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0xffffffff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
+};
+
+#define READ_PEND(base) (*(base))
+#define READ_MASK(base) (*(base + 2))
+#define WRITE_MASK(base, val) (*(base + 2) = (val))
+
+static inline int irq_to_group(unsigned int irq_nr)
+{
+	return (irq_nr - GROUP0_IRQ_BASE) >> 5;
+}
+
+static inline int group_to_ip(unsigned int group)
+{
+	return group + 2;
+}
+
+static inline void enable_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	set_c0_status(ipnum);
+}
+
+static inline void disable_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	clear_c0_status(ipnum);
+}
+
+static inline void ack_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	clear_c0_cause(ipnum);
+}
+
+static void rb532_enable_irq(unsigned int irq_nr)
+{
+	int ip = irq_nr - GROUP0_IRQ_BASE;
+	unsigned int group, intr_bit;
+	volatile unsigned int *addr;
+
+	if (ip < 0)
+		enable_local_irq(irq_nr);
+	else {
+		group = ip >> 5;
+
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+
+		enable_local_irq(group_to_ip(group));
+
+		addr = intr_group[group].base_addr;
+		WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+	}
+}
+
+static void rb532_disable_irq(unsigned int irq_nr)
+{
+	int ip = irq_nr - GROUP0_IRQ_BASE;
+	unsigned int group, intr_bit, mask;
+	volatile unsigned int *addr;
+
+	if (ip < 0) {
+		disable_local_irq(irq_nr);
+	} else {
+		group = ip >> 5;
+
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+		addr = intr_group[group].base_addr;
+		mask = READ_MASK(addr);
+		mask |= intr_bit;
+		WRITE_MASK(addr, mask);
+
+		/*
+		 * if there are no more interrupts enabled in this
+		 * group, disable corresponding IP
+		 */
+		if (mask == intr_group[group].mask)
+			disable_local_irq(group_to_ip(group));
+	}
+}
+
+static void rb532_mask_and_ack_irq(unsigned int irq_nr)
+{
+	rb532_disable_irq(irq_nr);
+	ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
+}
+
+static struct irq_chip rc32434_irq_type = {
+	.name		= "RB532",
+	.ack		= rb532_disable_irq,
+	.mask		= rb532_disable_irq,
+	.mask_ack	= rb532_mask_and_ack_irq,
+	.unmask		= rb532_enable_irq,
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	pr_info("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
+
+	for (i = 0; i < RC32434_NR_IRQS; i++)
+		set_irq_chip_and_handler(i,  &rc32434_irq_type,
+					handle_level_irq);
+}
+
+/* Main Interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int ip, pend, group;
+	volatile unsigned int *addr;
+	unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+	if (cp0_cause & CAUSEF_IP7) {
+		do_IRQ(7);
+	} else {
+		ip = (cp0_cause & 0x7c00);
+		if (ip) {
+			group = 21 + (fls(ip) - 32);
+
+			addr = intr_group[group].base_addr;
+
+			pend = READ_PEND(addr);
+			pend &= ~READ_MASK(addr);	/* only unmasked interrupts */
+			pend = 39 + (fls(pend) - 32);
+			do_IRQ((group << 5) + pend);
+		}
+	}
+}
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
new file mode 100644
index 00000000000..1bc0af8febf
--- /dev/null
+++ b/arch/mips/rb532/prom.c
@@ -0,0 +1,158 @@
+/*
+ *  RouterBoard 500 specific prom routines
+ *
+ *  Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com>
+ *  Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr>
+ *  Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org>
+ *			Felix Fietkau <nbd@openwrt.org>
+ *			Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-rc32434/ddr.h>
+#include <asm/mach-rc32434/prom.h>
+
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int gpio_bootup_state;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+static struct resource ddr_reg[] = {
+	{
+		.name = "ddr-reg",
+		.start = DDR0_PHYS_ADDR,
+		.end = DDR0_PHYS_ADDR + sizeof(struct ddr_ram),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+void __init prom_free_prom_memory(void)
+{
+	/* No prom memory to free */
+}
+
+static inline int match_tag(char *arg, const char *tag)
+{
+	return strncmp(arg, tag, strlen(tag)) == 0;
+}
+
+static inline unsigned long tag2ul(char *arg, const char *tag)
+{
+	char *num;
+
+	num = arg + strlen(tag);
+	return simple_strtoul(num, 0, 10);
+}
+
+void __init prom_setup_cmdline(void)
+{
+	char cmd_line[CL_SIZE];
+	char *cp, *board;
+	int prom_argc;
+	char **prom_argv, **prom_envp;
+	int i;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	cp = cmd_line;
+		/* Note: it is common that parameters start
+		 * at argv[1] and not argv[0],
+		 * however, our elf loader starts at [0] */
+	for (i = 0; i < prom_argc; i++) {
+		if (match_tag(prom_argv[i], FREQ_TAG)) {
+			idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
+			continue;
+		}
+#ifdef IGNORE_CMDLINE_MEM
+		/* parses out the "mem=xx" arg */
+		if (match_tag(prom_argv[i], MEM_TAG))
+			continue;
+#endif
+		if (i > 0)
+			*(cp++) = ' ';
+		if (match_tag(prom_argv[i], BOARD_TAG)) {
+			board = prom_argv[i] + strlen(BOARD_TAG);
+
+			if (match_tag(board, BOARD_RB532A))
+				mips_machtype = MACH_MIKROTIK_RB532A;
+			else
+				mips_machtype = MACH_MIKROTIK_RB532;
+		}
+
+		if (match_tag(prom_argv[i], GPIO_TAG))
+			gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
+
+		strcpy(cp, prom_argv[i]);
+		cp += strlen(prom_argv[i]);
+	}
+	*(cp++) = ' ';
+
+	i = strlen(arcs_cmdline);
+	if (i > 0) {
+		*(cp++) = ' ';
+		strcpy(cp, arcs_cmdline);
+		cp += strlen(arcs_cmdline);
+	}
+	if (gpio_bootup_state & 0x02)
+		strcpy(cp, GPIO_INIT_NOBUTTON);
+	else
+		strcpy(cp, GPIO_INIT_BUTTON);
+
+	cmd_line[CL_SIZE-1] = '\0';
+
+	strcpy(arcs_cmdline, cmd_line);
+}
+
+void __init prom_init(void)
+{
+	struct ddr_ram __iomem *ddr;
+	phys_t memsize;
+	phys_t ddrbase;
+
+	ddr = ioremap_nocache(ddr_reg[0].start,
+			ddr_reg[0].end - ddr_reg[0].start);
+
+	if (!ddr) {
+		printk(KERN_ERR "Unable to remap DDR register\n");
+		return;
+	}
+
+	ddrbase = (phys_t)&ddr->ddrbase;
+	memsize = (phys_t)&ddr->ddrmask;
+	memsize = 0 - memsize;
+
+	prom_setup_cmdline();
+
+	/* give all RAM to boot allocator,
+	 * except for the first 0x400 and the last 0x200 bytes */
+	add_memory_region(ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
new file mode 100644
index 00000000000..1a05b5ddee0
--- /dev/null
+++ b/arch/mips/rb532/serial.c
@@ -0,0 +1,53 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     Serial port initialisation.
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/serial.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+static struct uart_port rb532_uart = {
+	.type = PORT_16550A,
+	.line = 0,
+	.irq = RC32434_UART0_IRQ,
+	.iotype = UPIO_MEM,
+	.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+	.regshift = 2
+};
+
+int __init setup_serial_port(void)
+{
+	rb532_uart.uartclk = idt_cpu_freq;
+
+	return early_serial_setup(&rb532_uart);
+}
+arch_initcall(setup_serial_port);
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 00000000000..7aafa95ac20
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,79 @@
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+	{
+		.name = "pci_reg0",
+		.start = PCI0_BASE_ADDR,
+		.end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static void rb_machine_restart(char *command)
+{
+	/* just jump to the reset vector */
+	writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+	for (;;)
+		continue;
+}
+
+void __init plat_mem_setup(void)
+{
+	u32 val;
+
+	_machine_restart = rb_machine_restart;
+	_machine_halt = rb_machine_halt;
+	pm_power_off = rb_machine_halt;
+
+	set_io_port_base(KSEG1);
+
+	pci_reg = ioremap_nocache(pci0_res[0].start,
+				pci0_res[0].end - pci0_res[0].start);
+	if (!pci_reg) {
+		printk(KERN_ERR "Could not remap PCI registers\n");
+		return;
+	}
+
+	val = __raw_readl(&pci_reg->pcic);
+	val &= 0xFFFFFF7;
+	__raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+	/* Enable PCI interrupts in EPLD Mask register */
+	*epld_mask = 0x0;
+	*(epld_mask + 1) = 0x0;
+#endif
+	write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		return "Mikrotik RB532A";
+		break;
+	default:
+		return "Mikrotik RB532";
+		break;
+	}
+}
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
new file mode 100644
index 00000000000..8e7a46855b5
--- /dev/null
+++ b/arch/mips/rb532/time.c
@@ -0,0 +1,67 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *  Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/debug.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. There is no RTC available.
+ *
+ * The RC32434 counts at half the CPU *core* speed.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+	mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
+
+	return mips_hpt_frequency / HZ;
+}
+
+void __init plat_time_init(void)
+{
+	unsigned int est_freq;
+	unsigned long flags, r4k_offset;
+
+	local_irq_save(flags);
+
+	printk(KERN_INFO "calculating r4koff... ");
+	r4k_offset = cal_r4koff();
+	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+	est_freq = 2 * r4k_offset * HZ;
+	est_freq += 5000;	/* round */
+	est_freq -= est_freq % 10000;
+	printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+	       (est_freq % 1000000) * 100 / 1000000);
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index fc6df96305e..52486c4d2b0 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -150,7 +150,7 @@ static int __init sgiseeq_devinit(void)
 		return res;
 
 	/* Second HPC is missing? */
-	if (!ip22_is_fullhouse() ||
+	if (ip22_is_fullhouse() ||
 	    get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
 		return 0;
 
@@ -188,8 +188,7 @@ static int __init sgi_button_devinit(void)
 	if (ip22_is_fullhouse())
 		return 0; /* full house has no volume buttons */
 
-	return IS_ERR(platform_device_register_simple("sgiindybtns",
-						      -1, NULL, 0));
+	return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
 }
 
 device_initcall(sgi_button_devinit);
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 5f389ee26fc..896a1ef8482 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
-#include <asm/gdb-stub.h>
 #include <asm/io.h>
 #include <asm/traps.h>
 #include <asm/sgialib.h>
@@ -81,30 +80,6 @@ void __init plat_mem_setup(void)
 		add_preferred_console("arc", 0, NULL);
 	}
 
-#ifdef CONFIG_KGDB
-	{
-	char *kgdb_ttyd = prom_getcmdline();
-
-	if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
-		int line;
-		kgdb_ttyd += strlen("kgdb=ttyd");
-		if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
-			printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
-			       ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
-		line = *kgdb_ttyd == '2' ? 0 : 1;
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session\n", line ? 1 : 2);
-		rs_kgdb_hook(line);
-
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session, please connect your debugger\n", line ? 1:2);
-
-		kgdb_enabled = 1;
-		/* Breakpoints and stuff are in sgi_irq_setup() */
-	}
-	}
-#endif
-
 #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
 	{
 		ULONG *gfxinfo;
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index fee7a2e0e53..30e12e2ec4b 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -412,7 +412,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs)
 	 * Now we have an asynchronous bus error, speculatively or DMA caused.
 	 * Need to search all DMA descriptors for the error address.
 	 */
-	for (i = 0; i < ARRAY_SIZE(hpc3); ++i) {
+	for (i = 0; i < sizeof(hpc3)/sizeof(struct hpc3_stat); ++i) {
 		struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i;
 		if ((cpu_err_stat & CPU_ERRMASK) &&
 		    (cpu_err_addr == hp->ndptr || cpu_err_addr == hp->cbp))
@@ -421,7 +421,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs)
 		    (gio_err_addr == hp->ndptr || gio_err_addr == hp->cbp))
 			break;
 	}
-	if (i < ARRAY_SIZE(hpc3)) {
+	if (i < sizeof(hpc3)/sizeof(struct hpc3_stat)) {
 		struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i;
 		printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:"
 		       " ctl %08x, ndp %08x, cbp %08x\n",
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index e0a6871d56e..31f4931b848 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -7,7 +7,6 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
-obj-$(CONFIG_KGDB)		+= ip27-dbgio.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c
deleted file mode 100644
index 08fd88b36f8..00000000000
--- a/arch/mips/sgi-ip27/ip27-dbgio.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK        (22000000 / 3)
-#define IOC3_FLAGS      (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
-	struct ioc3 *ioc3;
-
-	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
-	return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_DR) == 0);
-	return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_THRE) == 0);
-	uart->iu_thr = c;
-}
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index 48932ce1d73..d9c79d8be81 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -4,6 +4,7 @@
  * Copyright 2000 - 2001 Kanoj Sarcar (kanoj@sgi.com)
  */
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/kernel.h>
 #include <linux/nodemask.h>
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 42cd1095630..060d853d7b3 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,8 +33,6 @@
 #define SLOT_PFNSHIFT           (SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT           (NASID_SHFT - PAGE_SHIFT)
 
-static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
-
 struct node_data *__node_data[MAX_COMPACT_NODES];
 
 EXPORT_SYMBOL(__node_data);
@@ -403,7 +401,7 @@ static void __init node_mem_init(cnodeid_t node)
 	 */
 	__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
 
-	NODE_DATA(node)->bdata = &plat_node_bdata[node];
+	NODE_DATA(node)->bdata = &bootmem_node_data[node];
 	NODE_DATA(node)->node_start_pfn = start_pfn;
 	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 2ee401ba0b2..3d63721e0e8 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -85,18 +85,7 @@ device_initcall(sgio2audio_devinit);
 
 static __init int sgio2btns_devinit(void)
 {
-	struct platform_device *pd;
-	int ret;
-
-	pd = platform_device_alloc("sgio2btns", -1);
-	if (!pd)
-		return -ENOMEM;
-
-	ret = platform_device_add(pd);
-	if (ret)
-		platform_device_put(pd);
-
-	return ret;
+	return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
 }
 
 device_initcall(sgio2btns_devinit);
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index db372a0f106..a35818ed426 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
 	.name = "BCM1480-IMR",
 	.ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq << 3)));
-		bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-		register_gdb_console();
-#endif
-		printk("Waiting for GDB on UART port %d\n", kgdb_port);
-		set_debug_traps();
-		breakpoint();
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat.irqs[smp_processor_id()][kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
 		bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)
-		bcm1480_kgdb_interrupt();		/* KGDB (uart 1) */
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 }
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index fd9604d5555..3de30f79db3 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -59,10 +59,6 @@ int cfe_cons_handle;
 extern unsigned long initrd_start, initrd_end;
 #endif
 
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
 static void __noreturn cfe_linux_exit(void *arg)
 {
 	int warm = *(int *)arg;
@@ -246,9 +242,6 @@ void __init prom_init(void)
 	int argc = fw_arg0;
 	char **envp = (char **) fw_arg2;
 	int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
-	char *arg;
-#endif
 
 	_machine_restart   = cfe_linux_restart;
 	_machine_halt      = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
 		}
 	}
 
-#ifdef CONFIG_KGDB
-	if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
-		kgdb_port = (arg[10] == '0') ? 0 : 1;
-	else
-		kgdb_port = 1;
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 28b012ab8dc..66e3e3fb311 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -576,7 +576,8 @@ static int __init sbprof_tb_init(void)
 
 	tb_class = tbc;
 
-	dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
+	dev = device_create_drvdata(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0),
+				    NULL, "tb");
 	if (IS_ERR(dev)) {
 		err = PTR_ERR(dev);
 		goto out_class;
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index eac9065ffe0..a5158483986 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ldt_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip sb1250_irq_type = {
 	.name = "SB1250-IMR",
 	.ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		__raw_writeq(M_DUART_IMR_BRK,
-			     IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_IMR_REGISTER(0,
-						   R_IMR_INTERRUPT_MAP_BASE) +
-				    (kgdb_irq << 3)));
-		sb1250_unmask_irq(0, kgdb_irq);
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat_this_cpu.irqs[kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void sb1250_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
 		sb1250_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
-		sb1250_kgdb_interrupt();
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 	else
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 255d692bfa1..f18ba9201bb 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,4 +1,3 @@
 obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
-obj-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644
index b97ae304848..00000000000
--- a/arch/mips/sibyte/swarm/dbg_io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 	115200, 8, N, 1.
- */
-
-#define	BAUD_RATE		115200
-#define	CLK_DIVISOR		V_DUART_BAUD_RATE(BAUD_RATE)
-#define	DATA_BITS		V_DUART_BITS_PER_CHAR_8		/* or 7    */
-#define	PARITY			V_DUART_PARITY_MODE_NONE	/* or even */
-#define	STOP_BITS		M_DUART_STOP_BIT_LEN_1		/* or 2    */
-
-static int duart_initialized = 0;	/* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define	duart_out(reg, val)	csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)		csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
-	duart_out(R_DUART_MODE_REG_1, data | parity);
-	duart_out(R_DUART_MODE_REG_2, stop);
-	duart_out(R_DUART_CLK_SEL, clk_divisor);
-
-	duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);	/* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
-	duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
-	return duart_in(R_DUART_RX_HOLD);
-}
-
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index b92a134ef12..840fe757c48 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -1,3 +1,27 @@
+config MACH_TX39XX
+	bool
+	select MACH_TXX9
+	select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+	bool
+	select MACH_TXX9
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+	bool
+	select DMA_NONCOHERENT
+	select SWAP_IO_SPACE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+
 config TOSHIBA_JMR3927
 	bool "Toshiba JMR-TX3927 board"
 	depends on MACH_TX39XX
@@ -7,6 +31,8 @@ config TOSHIBA_RBTX4927
 	bool "Toshiba RBTX49[23]7 board"
 	depends on MACH_TX49XX
 	select SOC_TX4927
+	# TX4937 is subset of TX4938
+	select SOC_TX4938
 	help
 	  This Toshiba board is based on the TX4927 processor. Say Y here to
 	  support this machine type
@@ -22,68 +48,37 @@ config TOSHIBA_RBTX4938
 config SOC_TX3927
 	bool
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
 	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX39XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4927
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4938
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config TOSHIBA_FPCIB0
 	bool "FPCIB0 Backplane Support"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	select I8259
 
 config PICMG_PCI_BACKPLANE_DEFAULT
 	bool "Support for PICMG PCI Backplane"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	default y if !TOSHIBA_FPCIB0
 
 if TOSHIBA_RBTX4938
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 668fdaad644..9bb34af26b7 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -4,9 +4,9 @@
 
 obj-y	+= setup.o
 obj-$(CONFIG_PCI)	+= pci.o
-obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o irq_tx4927.o
-obj-$(CONFIG_SOC_TX4938)	+= mem_tx4938.o irq_tx4938.o
+obj-$(CONFIG_SOC_TX3927)	+= setup_tx3927.o irq_tx3927.o
+obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
+obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)	+= dbgio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c
deleted file mode 100644
index 33b9c672a32..00000000000
--- a/arch/mips/txx9/generic/dbgio.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
-	return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
-	return (txx9_sio_kdbg_wr(byte));
-}
-
diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c
new file mode 100644
index 00000000000..c683f593eda
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx3927.c
@@ -0,0 +1,25 @@
+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+	int i;
+
+	txx9_irq_init(TX3927_IRC_REG);
+	/* raise priority for timers, sio */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+	for (i = 0; i < TX3927_NR_SIO; i++)
+		txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}
diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c
index 6377bd8a905..cbea1fdde82 100644
--- a/arch/mips/txx9/generic/irq_tx4927.c
+++ b/arch/mips/txx9/generic/irq_tx4927.c
@@ -31,7 +31,7 @@
 void __init tx4927_irq_init(void)
 {
 	mips_cpu_irq_init();
-	txx9_irq_init(TX4927_IRC_REG);
+	txx9_irq_init(TX4927_IRC_REG & 0xfffffffffULL);
 	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT,
 				handle_simple_irq);
 }
diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c
index 5fc86c9c9d2..6eac684bf19 100644
--- a/arch/mips/txx9/generic/irq_tx4938.c
+++ b/arch/mips/txx9/generic/irq_tx4938.c
@@ -19,7 +19,7 @@
 void __init tx4938_irq_init(void)
 {
 	mips_cpu_irq_init();
-	txx9_irq_init(TX4938_IRC_REG);
+	txx9_irq_init(TX4938_IRC_REG & 0xfffffffffULL);
 	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT,
 				handle_simple_irq);
 }
diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c
index 12dfc377bf2..ef6ea6e9787 100644
--- a/arch/mips/txx9/generic/mem_tx4927.c
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/mips/tx4927/common/tx4927_prom.c
+ * linux/arch/mips/txx9/generic/mem_tx4927.c
  *
  * common tx4927 memory interface
  *
@@ -32,8 +32,9 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/io.h>
+#include <asm/txx9/tx4927.h>
 
-static unsigned int __init tx4927_process_sdccr(unsigned long addr)
+static unsigned int __init tx4927_process_sdccr(u64 __iomem *addr)
 {
 	u64 val;
 	unsigned int sdccr_ce;
@@ -45,97 +46,32 @@ static unsigned int __init tx4927_process_sdccr(unsigned long addr)
 	unsigned int rs = 0;
 	unsigned int cs = 0;
 	unsigned int mw = 0;
-	unsigned int msize = 0;
 
-	val = __raw_readq((void __iomem *)addr);
+	val = __raw_readq(addr);
 
 	/* MVMCP -- need #defs for these bits masks */
 	sdccr_ce = ((val & (1 << 10)) >> 10);
 	sdccr_bs = ((val & (1 << 8)) >> 8);
 	sdccr_rs = ((val & (3 << 5)) >> 5);
-	sdccr_cs = ((val & (3 << 2)) >> 2);
+	sdccr_cs = ((val & (7 << 2)) >> 2);
 	sdccr_mw = ((val & (1 << 0)) >> 0);
 
 	if (sdccr_ce) {
-		switch (sdccr_bs) {
-		case 0:{
-				bs = 2;
-				break;
-			}
-		case 1:{
-				bs = 4;
-				break;
-			}
-		}
-		switch (sdccr_rs) {
-		case 0:{
-				rs = 2048;
-				break;
-			}
-		case 1:{
-				rs = 4096;
-				break;
-			}
-		case 2:{
-				rs = 8192;
-				break;
-			}
-		case 3:{
-				rs = 0;
-				break;
-			}
-		}
-		switch (sdccr_cs) {
-		case 0:{
-				cs = 256;
-				break;
-			}
-		case 1:{
-				cs = 512;
-				break;
-			}
-		case 2:{
-				cs = 1024;
-				break;
-			}
-		case 3:{
-				cs = 2048;
-				break;
-			}
-		}
-		switch (sdccr_mw) {
-		case 0:{
-				mw = 8;
-				break;
-			}	/* 8 bytes = 64 bits */
-		case 1:{
-				mw = 4;
-				break;
-			}	/* 4 bytes = 32 bits */
-		}
+		bs = 2 << sdccr_bs;
+		rs = 2048 << sdccr_rs;
+		cs = 256 << sdccr_cs;
+		mw = 8 >> sdccr_mw;
 	}
 
-	/*            bytes per chip     MB per chip      num chips */
-	msize = (((rs * cs * mw) / (1024 * 1024)) * bs);
-
-	return (msize);
+	return rs * cs * mw * bs;
 }
 
-
 unsigned int __init tx4927_get_mem_size(void)
 {
-	unsigned int c0;
-	unsigned int c1;
-	unsigned int c2;
-	unsigned int c3;
-	unsigned int total;
-
-	/* MVMCP -- need #defs for these registers */
-	c0 = tx4927_process_sdccr(0xff1f8000);
-	c1 = tx4927_process_sdccr(0xff1f8008);
-	c2 = tx4927_process_sdccr(0xff1f8010);
-	c3 = tx4927_process_sdccr(0xff1f8018);
-	total = c0 + c1 + c2 + c3;
+	unsigned int total = 0;
+	int i;
 
-	return (total);
+	for (i = 0; i < ARRAY_SIZE(tx4927_sdramcptr->cr); i++)
+		total += tx4927_process_sdccr(&tx4927_sdramcptr->cr[i]);
+	return total;
 }
diff --git a/arch/mips/txx9/generic/mem_tx4938.c b/arch/mips/txx9/generic/mem_tx4938.c
deleted file mode 100644
index 20baeaeba4c..00000000000
--- a/arch/mips/txx9/generic/mem_tx4938.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/prom.c
- *
- * common tx4938 memory interface
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-static unsigned int __init
-tx4938_process_sdccr(u64 * addr)
-{
-	u64 val;
-	unsigned int sdccr_ce;
-	unsigned int sdccr_rs;
-	unsigned int sdccr_cs;
-	unsigned int sdccr_mw;
-	unsigned int rs = 0;
-	unsigned int cs = 0;
-	unsigned int mw = 0;
-	unsigned int bc = 4;
-	unsigned int msize = 0;
-
-	val = ____raw_readq((void __iomem *)addr);
-
-	/* MVMCP -- need #defs for these bits masks */
-	sdccr_ce = ((val & (1 << 10)) >> 10);
-	sdccr_rs = ((val & (3 << 5)) >> 5);
-	sdccr_cs = ((val & (7 << 2)) >> 2);
-	sdccr_mw = ((val & (1 << 0)) >> 0);
-
-	if (sdccr_ce) {
-		switch (sdccr_rs) {
-		case 0:{
-				rs = 2048;
-				break;
-			}
-		case 1:{
-				rs = 4096;
-				break;
-			}
-		case 2:{
-				rs = 8192;
-				break;
-			}
-		default:{
-				rs = 0;
-				break;
-			}
-		}
-		switch (sdccr_cs) {
-		case 0:{
-				cs = 256;
-				break;
-			}
-		case 1:{
-				cs = 512;
-				break;
-			}
-		case 2:{
-				cs = 1024;
-				break;
-			}
-		case 3:{
-				cs = 2048;
-				break;
-			}
-		case 4:{
-				cs = 4096;
-				break;
-			}
-		default:{
-				cs = 0;
-				break;
-			}
-		}
-		switch (sdccr_mw) {
-		case 0:{
-				mw = 8;
-				break;
-			}	/* 8 bytes = 64 bits */
-		case 1:{
-				mw = 4;
-				break;
-			}	/* 4 bytes = 32 bits */
-		}
-	}
-
-	/*           bytes per chip    MB per chip          bank count */
-	msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));
-
-	/* MVMCP -- bc hard coded to 4 from table 9.3.1     */
-	/*          boad supports bc=2 but no way to detect */
-
-	return (msize);
-}
-
-unsigned int __init
-tx4938_get_mem_size(void)
-{
-	unsigned int c0;
-	unsigned int c1;
-	unsigned int c2;
-	unsigned int c3;
-	unsigned int total;
-
-	/* MVMCP -- need #defs for these registers */
-	c0 = tx4938_process_sdccr((u64 *) 0xff1f8000);
-	c1 = tx4938_process_sdccr((u64 *) 0xff1f8008);
-	c2 = tx4938_process_sdccr((u64 *) 0xff1f8010);
-	c3 = tx4938_process_sdccr((u64 *) 0xff1f8018);
-	total = c0 + c1 + c2 + c3;
-
-	return (total);
-}
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 0b92d8c1320..7b637a7c0e6 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return txx9_board_vec->pci_map_irq(dev, slot, pin);
 }
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+	if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+		return NULL;
+	if (!strcmp(str, "picmg")) {
+		/* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+		   (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+		txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strcmp(str, "nopicmg")) {
+		/* non-PICMG compliant backplane (TOSHIBA
+		   RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+		txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strncmp(str, "clk=", 4)) {
+		char *val = str + 4;
+		txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+		if (strcmp(val, "33") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+		else if (strcmp(val, "66") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+		else /* "auto" */
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+		return NULL;
+	} else if (!strncmp(str, "err=", 4)) {
+		if (!strcmp(str + 4, "panic"))
+			txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+		else if (!strcmp(str + 4, "ignore"))
+			txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+		return NULL;
+	}
+	return str;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 5afc5d5cab0..fe6bee09cec 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -19,8 +19,14 @@
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
 #include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
 #ifdef CONFIG_CPU_TX49XX
 #include <asm/txx9/tx4938.h>
 #endif
@@ -30,6 +36,7 @@ struct resource txx9_ce_res[8];
 static char txx9_ce_res_name[8][4];	/* "CEn" */
 
 /* pcode, internal register */
+unsigned int txx9_pcode;
 char txx9_pcode_str[8];
 static struct resource txx9_reg_res = {
 	.name = txx9_pcode_str,
@@ -46,6 +53,7 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
 		txx9_ce_res[i].name = txx9_ce_res_name[i];
 	}
 
+	txx9_pcode = pcode;
 	sprintf(txx9_pcode_str, "TX%x", pcode);
 	if (base) {
 		txx9_reg_res.start = base & 0xfffffffffULL;
@@ -59,15 +67,16 @@ unsigned int txx9_master_clock;
 unsigned int txx9_cpu_clock;
 unsigned int txx9_gbus_clock;
 
+int txx9_ccfg_toeon __initdata = 1;
 
 /* Minimum CLK support */
 
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	if (!strcmp(id, "spi-baseclk"))
-		return (struct clk *)(txx9_gbus_clock / 2 / 4);
+		return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 4);
 	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)(txx9_gbus_clock / 2);
+		return (struct clk *)((unsigned long)txx9_gbus_clock / 2);
 	return ERR_PTR(-ENOENT);
 }
 EXPORT_SYMBOL(clk_get);
@@ -94,6 +103,22 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);
 
+/* GPIO support */
+
+#ifdef CONFIG_GENERIC_GPIO
+int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+#endif
+
 extern struct txx9_board_vec jmr3927_vec;
 extern struct txx9_board_vec rbtx4927_vec;
 extern struct txx9_board_vec rbtx4937_vec;
@@ -107,6 +132,12 @@ void __init prom_init_cmdline(void)
 	int argc = (int)fw_arg0;
 	char **argv = (char **)fw_arg1;
 	int i;			/* Always ignore the "-c" at argv[0] */
+#ifdef CONFIG_64BIT
+	char *fixed_argv[32];
+	for (i = 0; i < argc; i++)
+		fixed_argv[i] = (char *)(long)(*((__s32 *)argv + i));
+	argv = fixed_argv;
+#endif
 
 	/* ignore all built-in args if any f/w args given */
 	if (argc > 1)
@@ -126,15 +157,19 @@ void __init prom_init(void)
 #endif
 #ifdef CONFIG_CPU_TX49XX
 	switch (TX4938_REV_PCODE()) {
+#ifdef CONFIG_TOSHIBA_RBTX4927
 	case 0x4927:
 		txx9_board_vec = &rbtx4927_vec;
 		break;
 	case 0x4937:
 		txx9_board_vec = &rbtx4937_vec;
 		break;
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938
 	case 0x4938:
 		txx9_board_vec = &rbtx4938_vec;
 		break;
+#endif
 	}
 #endif
 
@@ -157,9 +192,133 @@ char * __init prom_getcmdline(void)
 	return &(arcs_cmdline[0]);
 }
 
+static void __noreturn txx9_machine_halt(void)
+{
+	local_irq_disable();
+	clear_c0_status(ST0_IM);
+	while (1) {
+		if (cpu_wait) {
+			(*cpu_wait)();
+			if (cpu_has_counter) {
+				/*
+				 * Clear counter interrupt while it
+				 * breaks WAIT instruction even if
+				 * masked.
+				 */
+				write_c0_compare(0);
+			}
+		}
+	}
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", busid,
+					res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+	struct platform_device *pdev =
+		platform_device_alloc("tc35815-mac", id);
+	if (!pdev ||
+	    platform_device_add_data(pdev, ethaddr, 6) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+			  unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+	struct uart_port req;
+
+	memset(&req, 0, sizeof(req));
+	req.line = line;
+	req.iotype = UPIO_MEM;
+	req.membase = ioremap(baseaddr, 0x24);
+	req.mapbase = baseaddr;
+	req.irq = irq;
+	if (!nocts)
+		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+	if (sclk) {
+		req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+		req.uartclk = sclk;
+	} else
+		req.uartclk = TXX9_IMCLK;
+	early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+	txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR	0x0c
+#define TXX9_SITFIFO	0x1c
+#define TXX9_SICISR_TXALS	0x00000002
+	while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+		 TXX9_SICISR_TXALS))
+		;
+	__raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+	early_txx9_sio_port = ioremap(baseaddr, 0x24);
+	txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
 /* wrappers */
 void __init plat_mem_setup(void)
 {
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0UL;	/* no limit */
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0UL;	/* no limit */
+
+	/* fallback restart/halt routines */
+	_machine_restart = (void (*)(char *))txx9_machine_halt;
+	_machine_halt = txx9_machine_halt;
+	pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+	pcibios_plat_setup = txx9_pcibios_setup;
+#endif
 	txx9_board_vec->mem_setup();
 }
 
@@ -170,6 +329,9 @@ void __init arch_init_irq(void)
 
 void __init plat_time_init(void)
 {
+#ifdef CONFIG_CPU_TX49XX
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+#endif
 	txx9_board_vec->time_init();
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
new file mode 100644
index 00000000000..7bd963d37fc
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -0,0 +1,130 @@
+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+	txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+	int i;
+	unsigned int conf;
+
+	/* don't enable - see errata */
+	txx9_ccfg_toeon = 0;
+	if (strstr(prom_getcmdline(), "toeon") != NULL)
+		txx9_ccfg_toeon = 1;
+
+	txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+			  TX3927_REG_SIZE);
+
+	/* SDRAMC,ROMC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx3927_romcptr->cr[i] & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	txx9_gbus_clock = txx9_cpu_clock / 2;
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+	/* clear BusErrorOnWrite flag */
+	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+	if (read_c0_conf() & TX39_CONF_WBON)
+		/* Disable PCI snoop */
+		tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+	else
+		/* Enable PCI SNOOP - with write through only */
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+	/* do reset on watchdog */
+	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+	printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+	       tx3927_ccfgptr->crir,
+	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+	/* TMR */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_tmr_init(TX3927_TMR_REG(i));
+
+	/* DMA */
+	tx3927_dmaptr->mcr = 0;
+	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+		/* reset channel */
+		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+		tx3927_dmaptr->ch[i].ccr = 0;
+	}
+	/* enable DMA */
+#ifdef __BIG_ENDIAN
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+	/* PIO */
+	__raw_writel(0, &tx3927_pioptr->maskcpu);
+	__raw_writel(0, &tx3927_pioptr->maskext);
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+	conf = read_c0_conf();
+	if (!(conf & TX39_CONF_ICE))
+		printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+	if (!(conf & TX39_CONF_DCE))
+		printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+	else if (!(conf & TX39_CONF_WBON))
+		printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+	else if (!(conf & TX39_CONF_CWFON))
+		printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+	else
+		printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+	txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+			     TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+			     TXX9_IMCLK);
+	txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX3927_SIO_REG(i),
+			      TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
new file mode 100644
index 00000000000..f80d4b7a694
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -0,0 +1,188 @@
+/*
+ * TX4927 setup routines
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4927.h>
+
+static void __init tx4927_wdr_init(void)
+{
+	/* clear WatchDogReset (W1C) */
+	tx4927_ccfg_set(TX4927_CCFG_WDRST);
+	/* do reset on watchdog */
+	tx4927_ccfg_set(TX4927_CCFG_WR);
+}
+
+void __init tx4927_wdt_init(void)
+{
+	txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static struct resource tx4927_sdram_resource[4];
+
+void __init tx4927_setup(void)
+{
+	int i;
+	__u32 divmode;
+	int cpuclk = 0;
+	u64 ccfg;
+
+	txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
+			  TX4927_REG_SIZE);
+
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(TX4927_EBUSC_CR(i) & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX4927_EBUSC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX4927_EBUSC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	ccfg = ____raw_readq(&tx4927_ccfgptr->ccfg);
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock from master_clock */
+		divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_8:
+		case TX4927_CCFG_DIVMODE_10:
+		case TX4927_CCFG_DIVMODE_12:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_2:
+		case TX4927_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4927_CCFG_DIVMODE_2_5:
+		case TX4927_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4927_CCFG_DIVMODE_3:
+		case TX4927_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4927_CCFG_DIVMODE_4:
+		case TX4927_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0)
+			txx9_cpu_clock = 200000000;	/* 200MHz */
+		/* calculate gbus_clock and master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_2:
+		case TX4927_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4927_CCFG_DIVMODE_2_5:
+		case TX4927_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4927_CCFG_DIVMODE_3:
+		case TX4927_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4927_CCFG_DIVMODE_4:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		}
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_8:
+		case TX4927_CCFG_DIVMODE_10:
+		case TX4927_CCFG_DIVMODE_12:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	tx4927_wdr_init();
+	/* clear BusErrorOnWrite flag (W1C) */
+	tx4927_ccfg_set(TX4927_CCFG_BEOW);
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx4927_ccfg_set(TX4927_CCFG_TOE);
+
+	/* DMA selection */
+	txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_DMASEL_ALL);
+
+	/* Use external clock for external arbiter */
+	if (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB))
+		txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_PCICLKEN_ALL);
+
+	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+	       txx9_pcode_str,
+	       (cpuclk + 500000) / 1000000,
+	       (txx9_master_clock + 500000) / 1000000,
+	       (__u32)____raw_readq(&tx4927_ccfgptr->crir),
+	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->pcfg));
+
+	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	for (i = 0; i < 4; i++) {
+		__u64 cr = TX4927_SDRAMC_CR(i);
+		unsigned long base, size;
+		if (!((__u32)cr & 0x00000400))
+			continue;	/* disabled */
+		base = (unsigned long)(cr >> 49) << 21;
+		size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
+		printk(" CR%d:%016llx", i, (unsigned long long)cr);
+		tx4927_sdram_resource[i].name = "SDRAM";
+		tx4927_sdram_resource[i].start = base;
+		tx4927_sdram_resource[i].end = base + size - 1;
+		tx4927_sdram_resource[i].flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4927_sdram_resource[i]);
+	}
+	printk(" TR:%09llx\n",
+	       (unsigned long long)____raw_readq(&tx4927_sdramcptr->tr));
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4927_NR_TMR; i++)
+		txx9_tmr_init(TX4927_TMR_REG(i) & 0xfffffffffULL);
+
+	/* PIO */
+	txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
+	__raw_writel(0, &tx4927_pioptr->maskcpu);
+	__raw_writel(0, &tx4927_pioptr->maskext);
+}
+
+void __init tx4927_time_init(unsigned int tmrnr)
+{
+	if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4927_TMR_REG(tmrnr) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4927_IR_TMR(tmrnr),
+				     TXX9_IMCLK);
+}
+
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
new file mode 100644
index 00000000000..f3040b9ba05
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -0,0 +1,270 @@
+/*
+ * TX4938/4937 setup routines
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4938.h>
+
+static void __init tx4938_wdr_init(void)
+{
+	/* clear WatchDogReset (W1C) */
+	tx4938_ccfg_set(TX4938_CCFG_WDRST);
+	/* do reset on watchdog */
+	tx4938_ccfg_set(TX4938_CCFG_WR);
+}
+
+void __init tx4938_wdt_init(void)
+{
+	txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static struct resource tx4938_sdram_resource[4];
+static struct resource tx4938_sram_resource;
+
+#define TX4938_SRAM_SIZE 0x800
+
+void __init tx4938_setup(void)
+{
+	int i;
+	__u32 divmode;
+	int cpuclk = 0;
+	u64 ccfg;
+
+	txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
+			  TX4938_REG_SIZE);
+
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(TX4938_EBUSC_CR(i) & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock from master_clock */
+		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			cpuclk = txx9_gbus_clock * 9 / 2; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0)
+			txx9_cpu_clock = 300000000;	/* 300MHz */
+		/* calculate gbus_clock and master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = cpuclk * 2 / 9; break;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	tx4938_wdr_init();
+	/* clear BusErrorOnWrite flag (W1C) */
+	tx4938_ccfg_set(TX4938_CCFG_BEOW);
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx4938_ccfg_set(TX4938_CCFG_TOE);
+
+	/* DMA selection */
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL);
+
+	/* Use external clock for external arbiter */
+	if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB))
+		txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL);
+
+	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+	       txx9_pcode_str,
+	       (cpuclk + 500000) / 1000000,
+	       (txx9_master_clock + 500000) / 1000000,
+	       (__u32)____raw_readq(&tx4938_ccfgptr->crir),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg));
+
+	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	for (i = 0; i < 4; i++) {
+		__u64 cr = TX4938_SDRAMC_CR(i);
+		unsigned long base, size;
+		if (!((__u32)cr & 0x00000400))
+			continue;	/* disabled */
+		base = (unsigned long)(cr >> 49) << 21;
+		size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
+		printk(" CR%d:%016llx", i, (unsigned long long)cr);
+		tx4938_sdram_resource[i].name = "SDRAM";
+		tx4938_sdram_resource[i].start = base;
+		tx4938_sdram_resource[i].end = base + size - 1;
+		tx4938_sdram_resource[i].flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4938_sdram_resource[i]);
+	}
+	printk(" TR:%09llx\n",
+	       (unsigned long long)____raw_readq(&tx4938_sdramcptr->tr));
+
+	/* SRAM */
+	if (txx9_pcode == 0x4938 && ____raw_readq(&tx4938_sramcptr->cr) & 1) {
+		unsigned int size = TX4938_SRAM_SIZE;
+		tx4938_sram_resource.name = "SRAM";
+		tx4938_sram_resource.start =
+			(____raw_readq(&tx4938_sramcptr->cr) >> (39-11))
+			& ~(size - 1);
+		tx4938_sram_resource.end =
+			tx4938_sram_resource.start + TX4938_SRAM_SIZE - 1;
+		tx4938_sram_resource.flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4938_sram_resource);
+	}
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4938_NR_TMR; i++)
+		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
+
+	/* DMA */
+	for (i = 0; i < 2; i++)
+		____raw_writeq(TX4938_DMA_MCR_MSTEN,
+			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
+
+	/* PIO */
+	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
+	__raw_writel(0, &tx4938_pioptr->maskcpu);
+	__raw_writel(0, &tx4938_pioptr->maskext);
+
+	if (txx9_pcode == 0x4938) {
+		__u64 pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+		/* set PCIC1 reset */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		if (pcfg & (TX4938_PCFG_ETH0_SEL | TX4938_PCFG_ETH1_SEL)) {
+			mdelay(1);	/* at least 128 cpu clock */
+			/* clear PCIC1 reset */
+			txx9_clear64(&tx4938_ccfgptr->clkctr,
+				     TX4938_CLKCTR_PCIC1RST);
+		} else {
+			printk(KERN_INFO "%s: stop PCIC1\n", txx9_pcode_str);
+			/* stop PCIC1 */
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_PCIC1CKD);
+		}
+		if (!(pcfg & TX4938_PCFG_ETH0_SEL)) {
+			printk(KERN_INFO "%s: stop ETH0\n", txx9_pcode_str);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH0RST);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH0CKD);
+		}
+		if (!(pcfg & TX4938_PCFG_ETH1_SEL)) {
+			printk(KERN_INFO "%s: stop ETH1\n", txx9_pcode_str);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH1RST);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH1CKD);
+		}
+	}
+}
+
+void __init tx4938_time_init(unsigned int tmrnr)
+{
+	if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4938_TMR_REG(tmrnr) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4938_IR_TMR(tmrnr),
+				     TXX9_IMCLK);
+}
+
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+	unsigned int ch_mask = 0;
+
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
+		ch_mask |= 1 << 1; /* disable SIO1 by PCFG setting */
+	for (i = 0; i < 2; i++) {
+		if ((1 << i) & ch_mask)
+			continue;
+		txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+	}
+}
+
+void __init tx4938_spi_init(int busid)
+{
+	txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+		      TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+	u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+	if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+	if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
+}
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 69e487467fa..a2b2d62d88e 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/txx9/smsc_fdc37m81x.h>
 
-#define DEBUG
-
 /* Common Registers */
 #define SMSC_FDC37M81X_CONFIG_INDEX  0x00
 #define SMSC_FDC37M81X_CONFIG_DATA   0x01
@@ -55,7 +53,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
 
 static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
 {
@@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	u8 chip_id;
 
 	if (g_smsc_fdc37m81x_base)
-		printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+		printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+		       __func__,
 		       field, g_smsc_fdc37m81x_base);
 
 	g_smsc_fdc37m81x_base = port;
@@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
 		smsc_fdc37m81x_config_end();
 	else {
-		printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+		printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
 		       chip_id);
 		g_smsc_fdc37m81x_base = 0;
 	}
@@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 }
 
 #ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
 {
-	printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+	printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+	       key, dev, reg,
 	       smsc_fdc37m81x_rd(reg));
 }
 
 void smsc_fdc37m81x_config_dump(void)
 {
 	u8 orig;
-	char *fname = "smsc_fdc37m81x_config_dump()";
+	const char *fname = __func__;
 
 	smsc_fdc37m81x_config_beg();
 
 	orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
 
-	printk("%s: common\n", fname);
+	printk(KERN_INFO "%s: common\n", fname);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_DNUM);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
@@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void)
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_PMGT);
 
-	printk("%s: keyboard\n", fname);
+	printk(KERN_INFO "%s: keyboard\n", fname);
 	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
 				       SMSC_FDC37M81X_ACTIVE);
diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile
index ba292c94566..20d61ac543e 100644
--- a/arch/mips/txx9/jmr3927/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -3,6 +3,5 @@
 #
 
 obj-y	+= prom.o irq.o setup.o
-obj-$(CONFIG_KGDB)	+= kgdb_io.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c
index 070c9a115e5..6ec626c9473 100644
--- a/arch/mips/txx9/jmr3927/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -30,15 +30,11 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>
 #include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
@@ -46,13 +42,6 @@
 #error JMR3927_IRQ_END > NR_IRQS
 #endif
 
-static unsigned char irc_level[TX3927_NUM_IR] = {
-	5, 5, 5, 5, 5, 5,	/* INT[5:0] */
-	7, 7,			/* SIO */
-	5, 5, 5, 0, 0,		/* DMA, PIO, PCI */
-	6, 6, 6			/* TMR */
-};
-
 /*
  * CP0_STATUS is a thread's resource (saved/restored on context switch).
  * So disable_irq/enable_irq MUST handle IOC/IRC registers.
@@ -103,26 +92,18 @@ static int jmr3927_irq_dispatch(int pending)
 	return irq;
 }
 
-#ifdef CONFIG_PCI
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
-	printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
-	       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
-	return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
-	.handler = jmr3927_pcierr_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "PCI error",
+static struct irq_chip jmr3927_irq_ioc = {
+	.name = "jmr3927_ioc",
+	.ack = mask_irq_ioc,
+	.mask = mask_irq_ioc,
+	.mask_ack = mask_irq_ioc,
+	.unmask = unmask_irq_ioc,
 };
-#endif
-
-static void __init jmr3927_irq_init(void);
 
 void __init jmr3927_irq_setup(void)
 {
+	int i;
+
 	txx9_irq_dispatch = jmr3927_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
@@ -138,34 +119,10 @@ void __init jmr3927_irq_setup(void)
 	/* clear PCI Reset interrupts */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 
-	jmr3927_irq_init();
+	tx3927_irq_init();
+	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
 	set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
-#ifdef CONFIG_PCI
-	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
-	/* enable all CPU interrupt bits. */
-	set_c0_status(ST0_IM);	/* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
-	.name = "jmr3927_ioc",
-	.ack = mask_irq_ioc,
-	.mask = mask_irq_ioc,
-	.mask_ack = mask_irq_ioc,
-	.unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
-	u32 i;
-
-	txx9_irq_init(TX3927_IRC_REG);
-	for (i = 0; i < TXx9_MAX_IR; i++)
-		txx9_irq_set_pri(i, irc_level[i]);
-	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
-		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 }
diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
deleted file mode 100644
index 5bd757e56f7..00000000000
--- a/arch/mips/txx9/jmr3927/kgdb_io.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT       0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
-        int i = 0;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(0)->tfifo = c;
-
-	return 1;
-}
-
-unsigned char getDebugChar(void)
-{
-        int i = 0;
-	int dicr;
-	char c;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-	/* diable RX int. */
-	dicr = tx3927_sioptr(0)->dicr;
-	tx3927_sioptr(0)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
-		;
-	c = tx3927_sioptr(0)->rfifo;
-
-	/* clear RX int. status */
-	tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
-	/* enable RX int. */
-	tx3927_sioptr(0)->dicr = dicr;
-
-	return c;
-}
-
-static void debugInit(int baud)
-{
-	tx3927_sioptr(0)->lcr = 0x020;
-	tx3927_sioptr(0)->dicr = 0;
-	tx3927_sioptr(0)->disr = 0x4100;
-	tx3927_sioptr(0)->cisr = 0x014;
-	tx3927_sioptr(0)->fcr = 0;
-	tx3927_sioptr(0)->flcr = 0x02;
-	tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
-		TXx927_SIBGR_BCLK_T0;
-}
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 2cadb423fac..70c4c8ec3e8 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -36,41 +36,18 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/bootinfo.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = c;
-	return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-	prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
-
 void __init jmr3927_prom_init(void)
 {
 	/* CCFG */
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		puts("Warning: TX3927 TLB off\n");
+		printk(KERN_ERR "TX3927 TLB off\n");
 
 	prom_init_cmdline();
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX3927_SIO_REG(1));
 }
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 5e35ef73c5a..87db41be8a5 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -32,27 +32,18 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
 #include <asm/reboot.h>
+#include <asm/txx9pio.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/jmr3927.h>
 #include <asm/mipsregs.h>
 
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
 {
+	local_irq_disable();
 #if 1	/* Resetting PCI bus */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
@@ -61,33 +52,13 @@ static inline void do_reset(void)
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 #endif
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
-	local_irq_disable();
-	puts("Rebooting...");
-	do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
-	puts("JMR-TX3927 halted.\n");
-	while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
-	puts("JMR-TX3927 halted. Please turn off the power.\n");
-	while (1);
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init jmr3927_time_init(void)
 {
-	txx9_clockevent_init(TX3927_TMR_REG(0),
-			     TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
-			     JMR3927_IMCLK);
-	txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+	tx3927_time_init(0, 1);
 }
 
 #define DO_WRITE_THROUGH
@@ -102,19 +73,6 @@ static void __init jmr3927_mem_setup(void)
 	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
 	_machine_restart = jmr3927_machine_restart;
-	_machine_halt = jmr3927_machine_halt;
-	pm_power_off = jmr3927_machine_power_off;
-
-	/*
-	 * IO/MEM resources.
-	 */
-	ioport_resource.start = 0;
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.start = 0;
-	iomem_resource.end = 0xffffffff;
-
-	/* Reboot on panic */
-	panic_timeout = 180;
 
 	/* cache setup */
 	{
@@ -133,7 +91,8 @@ static void __init jmr3927_mem_setup(void)
 #endif
 
 		conf = read_c0_conf();
-		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+			  TX39_CONF_WBON | TX39_CONF_CWFON);
 		conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
 		conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
 		conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
@@ -146,47 +105,14 @@ static void __init jmr3927_mem_setup(void)
 	/* initialize board */
 	jmr3927_board_init();
 
-	argptr = prom_getcmdline();
-
-	if ((argptr = strstr(argptr, "toeon")) != NULL)
-		jmr3927_ccfg_toeon = 1;
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "ip=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " ip=bootp");
-	}
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
-			req.mapbase = TX3927_SIO_REG(i);
-			req.irq = i == 0 ?
-				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
-			if (i == 0)
-				req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = JMR3927_IMCLK;
-			early_serial_txx9_setup(&req);
-		}
-	}
+	tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=")) == NULL) {
-		argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
 		strcat(argptr, " console=ttyS1,115200");
-	}
-#endif
 #endif
 }
 
-static void tx3927_setup(void);
-
 static void __init jmr3927_pci_setup(void)
 {
 #ifdef CONFIG_PCI
@@ -207,32 +133,13 @@ static void __init jmr3927_pci_setup(void)
 		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	}
 	tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+	tx3927_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
 static void __init jmr3927_board_init(void)
 {
-	tx3927_setup();
-	jmr3927_pci_setup();
-
-	/* SIO0 DTR on */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
-	jmr3927_led_set(0);
-
-	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
-	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_dipsw1(), jmr3927_dipsw2(),
-	       jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
-	int i;
-
 	txx9_cpu_clock = JMR3927_CORECLK;
-	txx9_gbus_clock = JMR3927_GBUSCLK;
 	/* SDRAMC are configured by PROM */
 
 	/* ROMC */
@@ -241,74 +148,32 @@ static void __init tx3927_setup(void)
 	tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
 	tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
 
-	/* CCFG */
-	/* enable Timeout BusError */
-	if (jmr3927_ccfg_toeon)
-		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
-	/* clear BusErrorOnWrite flag */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
-	/* Disable PCI snoop */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
-	/* do reset on watchdog */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
-	/* Enable PCI SNOOP - with write through only */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
 	/* Pin selection */
 	tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
 	tx3927_ccfgptr->pcfg |=
 		TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
 		(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
 
-	printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
-	       tx3927_ccfgptr->crir,
-	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
-	/* TMR */
-	for (i = 0; i < TX3927_NR_TMR; i++)
-		txx9_tmr_init(TX3927_TMR_REG(i));
-
-	/* DMA */
-	tx3927_dmaptr->mcr = 0;
-	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
-		/* reset channel */
-		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
-		tx3927_dmaptr->ch[i].ccr = 0;
-	}
-	/* enable DMA */
-#ifdef __BIG_ENDIAN
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
+	tx3927_setup();
 
-	/* PIO */
 	/* PIO[15:12] connected to LEDs */
 	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
-	__raw_writel(0, &tx3927_pioptr->maskcpu);
-	__raw_writel(0, &tx3927_pioptr->maskext);
-	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
 	gpio_request(11, "dipsw1");
 	gpio_request(10, "dipsw2");
-	{
-		unsigned int conf;
 
-	conf = read_c0_conf();
-               if (!(conf & TX39_CONF_ICE))
-                       printk("TX3927 I-Cache disabled.\n");
-               if (!(conf & TX39_CONF_DCE))
-                       printk("TX3927 D-Cache disabled.\n");
-               else if (!(conf & TX39_CONF_WBON))
-                       printk("TX3927 D-Cache WriteThrough.\n");
-               else if (!(conf & TX39_CONF_CWFON))
-                       printk("TX3927 D-Cache WriteBack.\n");
-               else
-                       printk("TX3927 D-Cache WriteBack (CWF) .\n");
-	}
+	jmr3927_pci_setup();
+
+	/* SIO0 DTR on */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+	jmr3927_led_set(0);
+
+	printk(KERN_INFO
+	       "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_dipsw1(), jmr3927_dipsw2(),
+	       jmr3927_dipsw3(), jmr3927_dipsw4());
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
@@ -324,42 +189,21 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
 #endif
 }
 
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
 {
 	static struct resource __initdata res = {
 		.start	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
 		.end	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev;
-	dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
-	return txx9_wdt_init(TX3927_TMR_REG(2));
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
 static void __init jmr3927_device_init(void)
 {
 	__swizzle_addr_b = jmr3927_swizzle_addr_b;
 	jmr3927_rtc_init();
-	jmr3927_wdt_init();
+	tx3927_wdt_init();
 }
 
 struct txx9_board_vec jmr3927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index 70f13211bc2..00cd5231da3 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -27,85 +27,86 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 /*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -126,17 +127,15 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
 	.mask_ack = toshiba_rbtx4927_irq_ioc_disable,
 	.unmask = toshiba_rbtx4927_irq_ioc_enable,
 };
-#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL
-#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL
 
 static int toshiba_rbtx4927_irq_nested(int sw_irq)
 {
 	u8 level3;
 
-	level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
+	level3 = readb(rbtx4927_imstat_addr) & 0x1f;
 	if (level3)
 		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
-	return (sw_irq);
+	return sw_irq;
 }
 
 static void __init toshiba_rbtx4927_irq_ioc_init(void)
@@ -154,18 +153,18 @@ static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
 {
 	unsigned char v;
 
-	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+	v = readb(rbtx4927_imask_addr);
 	v |= (1 << (irq - RBTX4927_IRQ_IOC));
-	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+	writeb(v, rbtx4927_imask_addr);
 }
 
 static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
 {
 	unsigned char v;
 
-	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+	v = readb(rbtx4927_imask_addr);
 	v &= ~(1 << (irq - RBTX4927_IRQ_IOC));
-	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
+	writeb(v, rbtx4927_imask_addr);
 	mmiowb();
 }
 
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 942e627d2dc..1dc0a5b1956 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -36,10 +36,7 @@
 
 void __init rbtx4927_prom_init(void)
 {
-	extern int tx4927_get_mem_size(void);
-	int msize;
-
 	prom_init_cmdline();
-	msize = tx4927_get_mem_size();
-	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+	add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 1657fd935da..0d39bafea79 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -46,24 +46,14 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4927.h>
 #include <asm/txx9/tx4938.h>	/* for TX4937 */
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-
-static int tx4927_ccfg_toeon = 1;
 
 #ifdef CONFIG_PCI
 static void __init tx4927_pci_setup(void)
@@ -110,6 +100,7 @@ static void __init tx4927_pci_setup(void)
 		tx4927_report_pciclk();
 		tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
 	}
+	tx4927_setup_pcierr_irq();
 }
 
 static void __init tx4937_pci_setup(void)
@@ -156,6 +147,7 @@ static void __init tx4937_pci_setup(void)
 		tx4938_report_pciclk();
 		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
 	}
+	tx4938_setup_pcierr_irq();
 }
 
 static void __init rbtx4927_arch_init(void)
@@ -172,138 +164,63 @@ static void __init rbtx4937_arch_init(void)
 #define rbtx4937_arch_init NULL
 #endif /* CONFIG_PCI */
 
-static void __noreturn wait_forever(void)
-{
-	while (1)
-		if (cpu_wait)
-			(*cpu_wait)();
-}
-
 static void toshiba_rbtx4927_restart(char *command)
 {
-	printk(KERN_NOTICE "System Rebooting...\n");
-
 	/* enable the s/w reset register */
-	writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE);
+	writeb(1, rbtx4927_softresetlock_addr);
 
 	/* wait for enable to be seen */
-	while ((readb(RBTX4927_SW_RESET_ENABLE) &
-		RBTX4927_SW_RESET_ENABLE_SET) == 0x00);
+	while (!(readb(rbtx4927_softresetlock_addr) & 1))
+		;
 
 	/* do a s/w reset */
-	writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO);
+	writeb(1, rbtx4927_softreset_addr);
 
-	/* do something passive while waiting for reset */
-	local_irq_disable();
-	wait_forever();
-	/* no return */
+	/* fallback */
+	(*_machine_halt)();
 }
 
-static void toshiba_rbtx4927_halt(void)
-{
-	printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_power_off(void)
-{
-	toshiba_rbtx4927_halt();
-	/* no return */
-}
+static void __init rbtx4927_clock_init(void);
+static void __init rbtx4937_clock_init(void);
 
 static void __init rbtx4927_mem_setup(void)
 {
-	int i;
 	u32 cp0_config;
 	char *argptr;
 
-	/* f/w leaves this on at startup */
-	clear_c0_status(ST0_ERL);
-
 	/* enable caches -- HCP5 does this, pmon does not */
 	cp0_config = read_c0_config();
 	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
 	write_c0_config(cp0_config);
 
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.end = 0xffffffff;
+	if (TX4927_REV_PCODE() == 0x4927) {
+		rbtx4927_clock_init();
+		tx4927_setup();
+	} else {
+		rbtx4937_clock_init();
+		tx4938_setup();
+	}
 
 	_machine_restart = toshiba_rbtx4927_restart;
-	_machine_halt = toshiba_rbtx4927_halt;
-	pm_power_off = toshiba_rbtx4927_power_off;
-
-	for (i = 0; i < TX4927_NR_TMR; i++)
-		txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL);
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic,
 				  RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
 				  RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
 
-	/* CCFG */
-	/* do reset on watchdog */
-	tx4927_ccfg_set(TX4927_CCFG_WR);
-	/* enable Timeout BusError */
-	if (tx4927_ccfg_toeon)
-		tx4927_ccfg_set(TX4927_CCFG_TOE);
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (char *)(0xff1ff300 + i * 0x100);
-			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
-			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = 50000000;
-			early_serial_txx9_setup(&req);
-		}
-	}
+	tx4927_sio_init(0, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
 #endif
 }
 
-static void __init rbtx49x7_common_time_init(void)
-{
-	/* change default value to udelay/mdelay take reasonable time */
-	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
-
-	mips_hpt_frequency = txx9_cpu_clock / 2;
-	if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
-		txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
-				     TXX9_IRQ_BASE + 17,
-				     50000000);
-}
-
-static void __init rbtx4927_time_init(void)
+static void __init rbtx4927_clock_init(void)
 {
 	/*
 	 * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
@@ -325,11 +242,9 @@ static void __init rbtx4927_time_init(void)
 	default:
 		txx9_cpu_clock = 200000000;	/* 200MHz */
 	}
-
-	rbtx49x7_common_time_init();
 }
 
-static void __init rbtx4937_time_init(void)
+static void __init rbtx4937_clock_init(void)
 {
 	/*
 	 * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
@@ -357,25 +272,26 @@ static void __init rbtx4937_time_init(void)
 	default:
 		txx9_cpu_clock = 333333333;	/* 333MHz */
 	}
+}
 
-	rbtx49x7_common_time_init();
+static void __init rbtx4927_time_init(void)
+{
+	tx4927_time_init(0);
 }
 
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
 {
-	static struct resource __initdata res = {
-		.start	= 0x1c010000,
-		.end	= 0x1c010000 + 0x800 - 1,
+	struct resource res = {
+		.start	= RBTX4927_BRAMRTC_BASE - IO_BASE,
+		.end	= RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
 {
-	static struct resource __initdata res[] = {
+	struct resource res[] = {
 		{
 			.start	= RBTX4927_RTL_8019_BASE,
 			.end	= RBTX4927_RTL_8019_BASE + 0x20 - 1,
@@ -385,36 +301,14 @@ static int __init rbtx4927_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static void __init rbtx4927_device_init(void)
 {
 	toshiba_rbtx4927_rtc_init();
 	rbtx4927_ne_init();
-	rbtx4927_wdt_init();
+	tx4927_wdt_init();
 }
 
 struct txx9_board_vec rbtx4927_vec __initdata = {
@@ -434,7 +328,7 @@ struct txx9_board_vec rbtx4937_vec __initdata = {
 	.prom_init = rbtx4927_prom_init,
 	.mem_setup = rbtx4927_mem_setup,
 	.irq_setup = rbtx4927_irq_setup,
-	.time_init = rbtx4937_time_init,
+	.time_init = rbtx4927_time_init,
 	.device_init = rbtx4927_device_init,
 	.arch_init = rbtx4937_arch_init,
 #ifdef CONFIG_PCI
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 3971a061657..ca2f8306ce9 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -11,59 +11,57 @@
  */
 
 /*
-IRQ  Device
-
-16   TX4938-CP0/00 Software 0
-17   TX4938-CP0/01 Software 1
-18   TX4938-CP0/02 Cascade TX4938-CP0
-19   TX4938-CP0/03 Multiplexed -- do not use
-20   TX4938-CP0/04 Multiplexed -- do not use
-21   TX4938-CP0/05 Multiplexed -- do not use
-22   TX4938-CP0/06 Multiplexed -- do not use
-23   TX4938-CP0/07 CPU TIMER
-
-24   TX4938-PIC/00
-25   TX4938-PIC/01
-26   TX4938-PIC/02 Cascade RBTX4938-IOC
-27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28   TX4938-PIC/04
-29   TX4938-PIC/05 TX4938 ETH1
-30   TX4938-PIC/06 TX4938 ETH0
-31   TX4938-PIC/07
-32   TX4938-PIC/08 TX4938 SIO 0
-33   TX4938-PIC/09 TX4938 SIO 1
-34   TX4938-PIC/10 TX4938 DMA0
-35   TX4938-PIC/11 TX4938 DMA1
-36   TX4938-PIC/12 TX4938 DMA2
-37   TX4938-PIC/13 TX4938 DMA3
-38   TX4938-PIC/14
-39   TX4938-PIC/15
-40   TX4938-PIC/16 TX4938 PCIC
-41   TX4938-PIC/17 TX4938 TMR0
-42   TX4938-PIC/18 TX4938 TMR1
-43   TX4938-PIC/19 TX4938 TMR2
-44   TX4938-PIC/20
-45   TX4938-PIC/21
-46   TX4938-PIC/22 TX4938 PCIERR
-47   TX4938-PIC/23
-48   TX4938-PIC/24
-49   TX4938-PIC/25
-50   TX4938-PIC/26
-51   TX4938-PIC/27
-52   TX4938-PIC/28
-53   TX4938-PIC/29
-54   TX4938-PIC/30
-55   TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/mipsregs.h>
@@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
 	return sw_irq;
 }
 
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
 static void __init
 toshiba_rbtx4938_irq_ioc_init(void)
 {
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index fbb37458ddb..d73123cd2ab 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -18,12 +18,9 @@
 
 void __init rbtx4938_prom_init(void)
 {
-	extern int tx4938_get_mem_size(void);
-	int msize;
 #ifndef CONFIG_TX4938_NAND_BOOT
 	prom_init_cmdline();
 #endif
-
-	msize = tx4938_get_mem_size();
-	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
+	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index aaa987ae0f8..9ab48dec0fe 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -13,55 +13,26 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
 #include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
 #include <asm/io.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4938.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
 #include <linux/spi/spi.h>
 #include <asm/txx9/spi.h>
 #include <asm/txx9pio.h>
 
-static int tx4938_ccfg_toeon = 1;
-
-static void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
 static void rbtx4938_machine_restart(char *command)
 {
 	local_irq_disable();
-
-	printk("Rebooting...");
 	writeb(1, rbtx4938_softresetlock_addr);
 	writeb(1, rbtx4938_sfvol_addr);
 	writeb(1, rbtx4938_softreset_addr);
-	while(1)
-		;
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4938_pci_setup(void)
@@ -128,6 +99,7 @@ static void __init rbtx4938_pci_setup(void)
 		register_pci_controller(c);
 		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
 	}
+	tx4938_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
@@ -158,19 +130,7 @@ static int __init rbtx4938_ethaddr_init(void)
 		if (sum)
 			printk(KERN_WARNING "seeprom: bad checksum.\n");
 	}
-	for (i = 0; i < 2; i++) {
-		unsigned int id =
-			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-		struct platform_device *pdev;
-		if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
-		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-			continue;
-		pdev = platform_device_alloc("tc35815-mac", id);
-		if (!pdev ||
-		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-		    platform_device_add(pdev))
-			platform_device_put(pdev);
-	}
+	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
 #endif /* CONFIG_PCI */
 	return 0;
 }
@@ -182,188 +142,10 @@ static void __init rbtx4938_spi_setup(void)
 }
 
 static struct resource rbtx4938_fpga_resource;
-static struct resource tx4938_sdram_resource[4];
-static struct resource tx4938_sram_resource;
-
-void __init tx4938_board_setup(void)
-{
-	int i;
-	unsigned long divmode;
-	int cpuclk = 0;
-	unsigned long pcode = TX4938_REV_PCODE();
-
-	ioport_resource.start = 0;
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.start = 0;
-	iomem_resource.end = 0xffffffff;	/* expand to 4GB */
-
-	txx9_reg_res_init(pcode, TX4938_REG_BASE,
-			  TX4938_REG_SIZE);
-	/* SDRAMC,EBUSC are configured by PROM */
-	for (i = 0; i < 8; i++) {
-		if (!(TX4938_EBUSC_CR(i) & 0x8))
-			continue;	/* disabled */
-		txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i);
-		txx9_ce_res[i].end =
-			txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1;
-		request_resource(&iomem_resource, &txx9_ce_res[i]);
-	}
-
-	/* clocks */
-	if (txx9_master_clock) {
-		u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
-		/* calculate gbus_clock and cpu_clock_freq from master_clock */
-		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_8:
-		case TX4938_CCFG_DIVMODE_10:
-		case TX4938_CCFG_DIVMODE_12:
-		case TX4938_CCFG_DIVMODE_16:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_gbus_clock = txx9_master_clock * 4; break;
-		default:
-			txx9_gbus_clock = txx9_master_clock;
-		}
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_2:
-		case TX4938_CCFG_DIVMODE_8:
-			cpuclk = txx9_gbus_clock * 2; break;
-		case TX4938_CCFG_DIVMODE_2_5:
-		case TX4938_CCFG_DIVMODE_10:
-			cpuclk = txx9_gbus_clock * 5 / 2; break;
-		case TX4938_CCFG_DIVMODE_3:
-		case TX4938_CCFG_DIVMODE_12:
-			cpuclk = txx9_gbus_clock * 3; break;
-		case TX4938_CCFG_DIVMODE_4:
-		case TX4938_CCFG_DIVMODE_16:
-			cpuclk = txx9_gbus_clock * 4; break;
-		case TX4938_CCFG_DIVMODE_4_5:
-		case TX4938_CCFG_DIVMODE_18:
-			cpuclk = txx9_gbus_clock * 9 / 2; break;
-		}
-		txx9_cpu_clock = cpuclk;
-	} else {
-		u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
-		if (txx9_cpu_clock == 0) {
-			txx9_cpu_clock = 300000000;	/* 300MHz */
-		}
-		/* calculate gbus_clock and master_clock from cpu_clock_freq */
-		cpuclk = txx9_cpu_clock;
-		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_2:
-		case TX4938_CCFG_DIVMODE_8:
-			txx9_gbus_clock = cpuclk / 2; break;
-		case TX4938_CCFG_DIVMODE_2_5:
-		case TX4938_CCFG_DIVMODE_10:
-			txx9_gbus_clock = cpuclk * 2 / 5; break;
-		case TX4938_CCFG_DIVMODE_3:
-		case TX4938_CCFG_DIVMODE_12:
-			txx9_gbus_clock = cpuclk / 3; break;
-		case TX4938_CCFG_DIVMODE_4:
-		case TX4938_CCFG_DIVMODE_16:
-			txx9_gbus_clock = cpuclk / 4; break;
-		case TX4938_CCFG_DIVMODE_4_5:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_gbus_clock = cpuclk * 2 / 9; break;
-		}
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_8:
-		case TX4938_CCFG_DIVMODE_10:
-		case TX4938_CCFG_DIVMODE_12:
-		case TX4938_CCFG_DIVMODE_16:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_master_clock = txx9_gbus_clock / 4; break;
-		default:
-			txx9_master_clock = txx9_gbus_clock;
-		}
-	}
-	/* change default value to udelay/mdelay take reasonable time */
-	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
-
-	/* CCFG */
-	/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
-	tx4938_ccfg_set(TX4938_CCFG_WDRST | TX4938_CCFG_BEOW);
-	/* do reset on watchdog */
-	tx4938_ccfg_set(TX4938_CCFG_WR);
-	/* clear PCIC1 reset */
-	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
-
-	/* enable Timeout BusError */
-	if (tx4938_ccfg_toeon)
-		tx4938_ccfg_set(TX4938_CCFG_TOE);
-
-	/* DMA selection */
-	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL);
-
-	/* Use external clock for external arbiter */
-	if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB))
-		txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL);
-
-	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
-	       txx9_pcode_str,
-	       (cpuclk + 500000) / 1000000,
-	       (txx9_master_clock + 500000) / 1000000,
-	       (__u32)____raw_readq(&tx4938_ccfgptr->crir),
-	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
-	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg));
-
-	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
-	for (i = 0; i < 4; i++) {
-		unsigned long long cr = tx4938_sdramcptr->cr[i];
-		unsigned long ram_base, ram_size;
-		if (!((unsigned long)cr & 0x00000400))
-			continue;	/* disabled */
-		ram_base = (unsigned long)(cr >> 49) << 21;
-		ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
-		if (ram_base >= 0x20000000)
-			continue;	/* high memory (ignore) */
-		printk(" CR%d:%016Lx", i, cr);
-		tx4938_sdram_resource[i].name = "SDRAM";
-		tx4938_sdram_resource[i].start = ram_base;
-		tx4938_sdram_resource[i].end = ram_base + ram_size - 1;
-		tx4938_sdram_resource[i].flags = IORESOURCE_MEM;
-		request_resource(&iomem_resource, &tx4938_sdram_resource[i]);
-	}
-	printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
-
-	/* SRAM */
-	if (tx4938_sramcptr->cr & 1) {
-		unsigned int size = 0x800;
-		unsigned long base =
-			(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
-		tx4938_sram_resource.name = "SRAM";
-		tx4938_sram_resource.start = base;
-		tx4938_sram_resource.end = base + size - 1;
-		tx4938_sram_resource.flags = IORESOURCE_MEM;
-		request_resource(&iomem_resource, &tx4938_sram_resource);
-	}
-
-	/* TMR */
-	for (i = 0; i < TX4938_NR_TMR; i++)
-		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
-
-	/* enable DMA */
-	for (i = 0; i < 2; i++)
-		____raw_writeq(TX4938_DMA_MCR_MSTEN,
-			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
-
-	/* PIO */
-	__raw_writel(0, &tx4938_pioptr->maskcpu);
-	__raw_writel(0, &tx4938_pioptr->maskext);
-
-#ifdef CONFIG_PCI
-	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
-#endif
-}
 
 static void __init rbtx4938_time_init(void)
 {
-	mips_hpt_frequency = txx9_cpu_clock / 2;
-	if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS)
-		txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
-				     TXX9_IRQ_BASE + TX4938_IR_TMR(0),
-				     txx9_gbus_clock / 2);
+	tx4938_time_init(0);
 }
 
 static void __init rbtx4938_mem_setup(void)
@@ -371,73 +153,43 @@ static void __init rbtx4938_mem_setup(void)
 	unsigned long long pcfg;
 	char *argptr;
 
-	iomem_resource.end = 0xffffffff;	/* 4GB */
-
 	if (txx9_master_clock == 0)
 		txx9_master_clock = 25000000; /* 25MHz */
-	tx4938_board_setup();
-#ifndef CONFIG_PCI
+
+	tx4938_setup();
+
+#ifdef CONFIG_PCI
+	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
+#else
 	set_io_port_base(RBTX4938_ETHER_BASE);
 #endif
 
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (char *)(0xff1ff300 + i * 0x100);
-			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = RBTX4938_IRQ_IRC_SIO(i);
-			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = 50000000;
-			early_serial_txx9_setup(&req);
-		}
-	}
+	tx4938_sio_init(7372800, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk("PIOSEL: disabling both ata and nand selection\n");
-	local_irq_disable();
+	printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
 	txx9_clear64(&tx4938_ccfgptr->pcfg,
 		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk("PIOSEL: enabling nand selection\n");
+	printk(KERN_INFO "PIOSEL: enabling nand selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk("PIOSEL: enabling ata selection\n");
+	printk(KERN_INFO "PIOSEL: enabling ata selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
-#ifdef CONFIG_IP_PNP
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "ip=") == NULL) {
-		strcat(argptr, " ip=any");
-	}
-#endif
-
-
-#ifdef CONFIG_FB
-	{
-		conswitchp = &dummy_con;
-	}
-#endif
-
 	rbtx4938_spi_setup();
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
 	/* fixup piosel */
@@ -457,12 +209,10 @@ static void __init rbtx4938_mem_setup(void)
 	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
 	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
 	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
-		printk("request resource for fpga failed\n");
+	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
+		printk(KERN_ERR "request resource for fpga failed\n");
 
 	_machine_restart = rbtx4938_machine_restart;
-	_machine_halt = rbtx4938_machine_halt;
-	pm_power_off = rbtx4938_machine_power_off;
 
 	writeb(0xff, rbtx4938_led_addr);
 	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
@@ -470,7 +220,7 @@ static void __init rbtx4938_mem_setup(void)
 	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
 }
 
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -482,22 +232,7 @@ static int __init rbtx4938_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* GPIO support */
-
-int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
@@ -533,24 +268,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = {
 	.ngpio = 3,
 };
 
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", 0,
-					res, ARRAY_SIZE(res));
-}
-
 static int __init rbtx4938_spi_init(void)
 {
 	struct spi_board_info srtc_info = {
@@ -573,42 +290,22 @@ static int __init rbtx4938_spi_init(void)
 	gpio_direction_output(16 + SEEPROM2_CS, 1);
 	gpio_request(16 + SEEPROM3_CS, "seeprom3");
 	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+	tx4938_spi_init(0);
 	return 0;
 }
 
 static void __init rbtx4938_arch_init(void)
 {
-	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16);
 	gpiochip_add(&rbtx4938_spi_gpio_chip);
 	rbtx4938_pci_setup();
 	rbtx4938_spi_init();
 }
 
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-
 static void __init rbtx4938_device_init(void)
 {
 	rbtx4938_ethaddr_init();
 	rbtx4938_ne_init();
-	rbtx4938_wdt_init();
+	tx4938_wdt_init();
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index cba36a247e3..92dd1a0ca35 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -72,6 +72,7 @@ static void irq_dispatch(unsigned int irq)
 	cascade = irq_cascade + irq;
 	if (cascade->get_irq != NULL) {
 		unsigned int source_irq = irq;
+		int ret;
 		desc = irq_desc + source_irq;
 		if (desc->chip->mask_ack)
 			desc->chip->mask_ack(source_irq);
@@ -79,8 +80,9 @@ static void irq_dispatch(unsigned int irq)
 			desc->chip->mask(source_irq);
 			desc->chip->ack(source_irq);
 		}
-		irq = cascade->get_irq(irq);
-		if (irq < 0)
+		ret = cascade->get_irq(irq);
+		irq = ret;
+		if (ret < 0)
 			atomic_inc(&irq_err_count);
 		else
 			irq_dispatch(irq);
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
index ded207efc97..f673383518e 100644
--- a/arch/mn10300/boot/compressed/misc.c
+++ b/arch/mn10300/boot/compressed/misc.c
@@ -153,26 +153,9 @@ static uch *output_data;
 static unsigned long output_ptr;
 
 
-static void *malloc(int size);
-
-static inline void free(void *where)
-{	/* Don't care */
-}
-
 static unsigned long free_mem_ptr = (unsigned long) &end;
 static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
 
-static inline void gzip_mark(void **ptr)
-{
-	kputs(".");
-	*ptr = (void *) free_mem_ptr;
-}
-
-static inline void gzip_release(void **ptr)
-{
-	free_mem_ptr = (unsigned long) *ptr;
-}
-
 #define INPLACE_MOVE_ROUTINE	0x1000
 #define LOW_BUFFER_START	0x2000
 #define LOW_BUFFER_END		0x90000
@@ -186,26 +169,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (!free_mem_ptr)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
 static inline void scroll(void)
 {
 	int i;
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 11de3606eee..b7cbb1487af 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -716,6 +716,12 @@ ENTRY(sys_call_table)
 	.long sys_fallocate		/* 325 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 330 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 21891c71d54..54be6afb555 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -163,8 +163,6 @@ static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 static char	trans_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 struct gdbstub_bkpt {
 	u8	*addr;		/* address of breakpoint */
 	u8	len;		/* size of breakpoint */
@@ -363,8 +361,8 @@ static int putpacket(char *buffer)
 		}
 
 		gdbstub_io_tx_char('#');
-		gdbstub_io_tx_char(hexchars[checksum >> 4]);
-		gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_io_tx_char(hex_asc_hi(checksum));
+		gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_io_rx_char(&ch, 0),
 		 ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
@@ -822,8 +820,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 1 && count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -831,10 +828,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 3 && count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -842,14 +837,10 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	while (count >= 4) {
 		if (gdbstub_read_dword(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -857,10 +848,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -868,8 +857,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1304,14 +1292,14 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
 
-		hx = hexchars[(excep & 0xf000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x0f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x00f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(excep);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1322,22 +1310,22 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
 
-		hx = hexchars[(bcberr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1353,14 +1341,12 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send trap type (converted to signal)
 	 */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/*
 	 * Send Error PC
 	 */
-	*ptr++ = hexchars[GDB_REGID_PC >> 4];
-	*ptr++ = hexchars[GDB_REGID_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1368,8 +1354,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REGID_FP >> 4];
-	*ptr++ = hexchars[GDB_REGID_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->a3, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1378,8 +1363,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send stack pointer
 	 */
 	ssp = (unsigned long) (regs + 1);
-	*ptr++ = hexchars[GDB_REGID_SP >> 4];
-	*ptr++ = hexchars[GDB_REGID_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&ssp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1399,8 +1383,8 @@ packet_waiting:
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -1838,8 +1822,8 @@ void gdbstub_exit(int status)
 
 	gdbstub_busy = 1;
 	output_buffer[0] = 'W';
-	output_buffer[1] = hexchars[(status >> 4) & 0x0F];
-	output_buffer[2] = hexchars[status & 0x0F];
+	output_buffer[1] = hex_asc_hi(status);
+	output_buffer[2] = hex_asc_lo(status);
 	output_buffer[3] = 0;
 
 	gdbstub_io_tx_char('$');
@@ -1853,8 +1837,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_io_tx_char('#');
-	gdbstub_io_tx_char(hexchars[checksum >> 4]);
-	gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_io_tx_char(hex_asc_hi(checksum));
+	gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_io_tx_flush();
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index b9c268c6b2f..aa07d0cd190 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -17,7 +17,6 @@ static const char serial_revdate[] = "2007-11-06";
 #define SUPPORT_SYSRQ
 #endif
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/circ_buf.h>
@@ -392,7 +391,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
 	struct uart_icount *icount = &port->uart.icount;
-	struct tty_struct *tty = port->uart.info->tty;
+	struct tty_struct *tty = port->uart.info->port.tty;
 	unsigned ix;
 	int count;
 	u8 st, ch, push, status, overrun;
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 0e4d2f6fa6e..8fa36893df7 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -24,6 +24,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/bug.h>
 
 #if 0
 #define DEBUGP printk
@@ -195,7 +196,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 /*
@@ -203,4 +204,5 @@ int module_finalize(const Elf_Ehdr *hdr,
  */
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
index babb7c2ac37..e4606586f94 100644
--- a/arch/mn10300/kernel/time.c
+++ b/arch/mn10300/kernel/time.c
@@ -1,6 +1,6 @@
 /* MN10300 Low level time management
  *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  * - Derived from arch/i386/kernel/time.c
  *
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/profile.h>
+#include <linux/cnt32_to_63.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
 #include <asm/processor.h>
@@ -40,27 +41,54 @@ static struct irqaction timer_irq = {
 	.name		= "timer",
 };
 
+static unsigned long sched_clock_multiplier;
+
 /*
  * scheduler clock - returns current time in nanosec units.
  */
 unsigned long long sched_clock(void)
 {
 	union {
-		unsigned long long l;
-		u32 w[2];
-	} quot;
+		unsigned long long ll;
+		unsigned l[2];
+	} tsc64, result;
+	unsigned long tsc, tmp;
+	unsigned product[3]; /* 96-bit intermediate value */
+
+	/* read the TSC value
+	 */
+	tsc = 0 - get_cycles(); /* get_cycles() counts down */
 
-	quot.w[0] = mn10300_last_tsc - get_cycles();
-	quot.w[1] = 1000000000;
+	/* expand to 64-bits.
+	 * - sched_clock() must be called once a minute or better or the
+	 *   following will go horribly wrong - see cnt32_to_63()
+	 */
+	tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
 
-	asm("mulu %2,%3,%0,%1"
-	    : "=r"(quot.w[1]), "=r"(quot.w[0])
-	    : "0"(quot.w[1]), "1"(quot.w[0])
+	/* scale the 64-bit TSC value to a nanosecond value via a 96-bit
+	 * intermediate
+	 */
+	asm("mulu	%2,%0,%3,%0	\n"	/* LSW * mult ->  0:%3:%0 */
+	    "mulu	%2,%1,%2,%1	\n"	/* MSW * mult -> %2:%1:0 */
+	    "add	%3,%1		\n"
+	    "addc	0,%2		\n"	/* result in %2:%1:%0 */
+	    : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp)
+	    :  "0"(tsc64.l[0]),  "1"(tsc64.l[1]),  "2"(sched_clock_multiplier)
 	    : "cc");
 
-	do_div(quot.l, MN10300_TSCCLK);
+	result.l[0] = product[1] << 16 | product[0] >> 16;
+	result.l[1] = product[2] << 16 | product[1] >> 16;
 
-	return quot.l;
+	return result.ll;
+}
+
+/*
+ * initialise the scheduler clock
+ */
+static void __init mn10300_sched_clock_init(void)
+{
+	sched_clock_multiplier =
+		__muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK);
 }
 
 /*
@@ -128,4 +156,6 @@ void __init time_init(void)
 	/* start the watchdog timer */
 	watchdog_go();
 #endif
+
+	mn10300_sched_clock_init();
 }
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 78f092ca031..33cf25025da 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -174,7 +174,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
 	 */
-	if (in_interrupt() || !mm)
+	if (in_atomic() || !mm)
 		goto no_context;
 
 	down_read(&mm->mmap_sem);
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
index 8c5d88c7b90..8cee387a24f 100644
--- a/arch/mn10300/mm/init.c
+++ b/arch/mn10300/mm/init.c
@@ -67,8 +67,8 @@ void __init paging_init(void)
 
 	/* declare the sizes of the RAM zones (only use the normal zone) */
 	zones_size[ZONE_NORMAL] =
-		(contig_page_data.bdata->node_low_pfn) -
-		(contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+		contig_page_data.bdata->node_low_pfn -
+		contig_page_data.bdata->node_min_pfn;
 
 	/* pass the memory from the bootmem allocator to the main allocator */
 	free_area_init(zones_size);
@@ -87,7 +87,7 @@ void __init mem_init(void)
 	if (!mem_map)
 		BUG();
 
-#define START_PFN	(contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN	(contig_page_data.bdata->node_min_pfn)
 #define MAX_LOW_PFN	(contig_page_data.bdata->node_low_pfn)
 
 	max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
index a477038752b..baffc581e03 100644
--- a/arch/mn10300/mm/pgtable.c
+++ b/arch/mn10300/mm/pgtable.c
@@ -27,33 +27,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * Associate a large virtual page frame with a given physical page frame
  * and protection flags for that frame. pfn is for the base of the page,
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 1263f00dc35..12c04c5e558 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -84,22 +84,28 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent)
-		put_user(offset, &dirent->d_off);
+		if (put_user(offset, &dirent->d_off))
+			goto Efault;
 	dirent = buf->current_dir;
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
+	    put_user(0, dirent->d_name + namlen))
+		goto Efault;
 	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(reclen, &dirent->d_reclen);
-	put_user(namlen, &dirent->d_namlen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	dirent = (void __user *)dirent + reclen;
-	buf->current_dir = dirent;
+	buf->current_dir = (void __user *)dirent + reclen;
 	buf->count -= reclen;
 	return 0;
+Efault:
+	buf->error = -EFAULT;
+	return -EFAULT;
 }
 
 #undef NAME_OFFSET
@@ -126,8 +132,10 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i
 	error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = count - buf.count;
+		if (put_user(file->f_pos, &lastdirent->d_off))
+			error = -EFAULT;
+		else
+			error = count - buf.count;
 	}
 
 out_putf:
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 0c5b9dabb47..18072e03a01 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -210,19 +210,19 @@ static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf)
 }
 
 /* hpux statfs */
-asmlinkage long hpux_statfs(const char __user *path,
+asmlinkage long hpux_statfs(const char __user *pathname,
 						struct hpux_statfs __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct hpux_statfs tmp;
-		error = vfs_statfs_hpux(nd.path.dentry, &tmp);
+		error = vfs_statfs_hpux(path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
@@ -448,7 +448,7 @@ int hpux_pipe(int *kstack_fildes)
 	int error;
 
 	lock_kernel();
-	error = do_pipe(kstack_fildes);
+	error = do_pipe_flags(kstack_fildes, 0);
 	unlock_kernel();
 	return error;
 }
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index fdacdd4341c..44138c3e6ea 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -47,7 +47,9 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 
+#include <asm/sections.h>
 #include <asm/unwind.h>
 
 #if 0
@@ -860,3 +862,15 @@ void module_arch_cleanup(struct module *mod)
 	deregister_unwind_table(mod);
 	module_bug_cleanup(mod);
 }
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+	Elf64_Fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->addr, p))
+		ptr = p;
+	return ptr;
+}
+#endif
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index b4d6c8777ed..7c155c254e7 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -36,7 +36,6 @@ extern int  data_start;
 
 #ifdef CONFIG_DISCONTIGMEM
 struct node_map_data node_data[MAX_NUMNODES] __read_mostly;
-bootmem_data_t bmem_data[MAX_NUMNODES] __read_mostly;
 unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
 #endif
 
@@ -262,7 +261,7 @@ static void __init setup_bootmem(void)
 #ifdef CONFIG_DISCONTIGMEM
 	for (i = 0; i < MAX_PHYSMEM_RANGES; i++) {
 		memset(NODE_DATA(i), 0, sizeof(pg_data_t));
-		NODE_DATA(i)->bdata = &bmem_data[i];
+		NODE_DATA(i)->bdata = &bootmem_node_data[i];
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
@@ -888,7 +887,7 @@ void __init paging_init(void)
 		}
 #endif
 
-		free_area_init_node(i, NODE_DATA(i), zones_size,
+		free_area_init_node(i, zones_size,
 				pmem_ranges[i].start_pfn, NULL);
 	}
 }
diff --git a/arch/powerpc/.gitignore b/arch/powerpc/.gitignore
deleted file mode 100644
index a1a869c8c84..00000000000
--- a/arch/powerpc/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-include
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index de88972c589..587da5e0990 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -110,9 +110,14 @@ config PPC
 	default y
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_IDE
+	select HAVE_IOREMAP_PROT
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_KPROBES
+	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
 	select HAVE_DMA_ATTRS if PPC64
 	select USE_GENERIC_SMP_HELPERS if SMP
@@ -199,7 +204,7 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
 
 config PPC_DCR_NATIVE
 	bool
@@ -568,11 +573,15 @@ config FSL_GTM
 config MCA
 	bool
 
+# Platforms that what PCI turned unconditionally just do select PCI
+# in their config node.  Platforms that want to choose at config
+# time should select PPC_PCI_CHOICE
+config PPC_PCI_CHOICE
+	bool
+
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
-		|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
-		|| PPC_PS3 || 44x
-	default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
+	bool "PCI support" if PPC_PCI_CHOICE
+	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
@@ -838,6 +847,7 @@ source "crypto/Kconfig"
 config PPC_CLOCK
 	bool
 	default n
+	select HAVE_CLK
 
 config PPC_LIB_RHEAP
 	bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 2840ab69ef4..4ebc52a19f0 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,22 +41,6 @@ config HCALL_STATS
 	  This option will add a small amount of overhead to all hypervisor
 	  calls.
 
-config DEBUGGER
-	bool "Enable debugger hooks"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for kernel debuggers. Unless you are
-	  intending to debug the kernel, say N here.
-
-config KGDB
-	bool "Include kgdb kernel debugger"
-	depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
-	select DEBUG_INFO
-	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
-
 config CODE_PATCHING_SELFTEST
 	bool "Run self-tests of the code-patching code."
 	depends on DEBUG_KERNEL
@@ -67,36 +51,9 @@ config FTR_FIXUP_SELFTEST
 	depends on DEBUG_KERNEL
 	default n
 
-choice
-	prompt "Serial Port"
-	depends on KGDB
-	default KGDB_TTYS1
-
-config KGDB_TTYS0
-	bool "ttyS0"
-
-config KGDB_TTYS1
-	bool "ttyS1"
-
-config KGDB_TTYS2
-	bool "ttyS2"
-
-config KGDB_TTYS3
-	bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
-	bool "Enable serial console thru kgdb port"
-	depends on KGDB && 8xx || CPM2
-	help
-	  If you enable this, all serial console messages will be sent
-	  over the gdb stub.
-	  If unsure, say N.
-
 config XMON
 	bool "Include xmon kernel debugger"
-	depends on DEBUGGER
+	depends on DEBUG_KERNEL
 	help
 	  Include in-kernel hooks for the xmon kernel monitor/debugger.
 	  Unless you are intending to debug the kernel, say N here.
@@ -126,6 +83,11 @@ config XMON_DISASSEMBLY
 	  to say Y here, unless you're building for a memory-constrained
 	  system.
 
+config DEBUGGER
+	bool
+	depends on KGDB || XMON
+	default y
+
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	help
@@ -135,7 +97,7 @@ config IRQSTACKS
 
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
-	depends on DEBUG_FS && PPC_MERGE
+	depends on DEBUG_FS
 	help
 	  This option will show the mapping relationship between hardware irq
 	  numbers and virtual irq numbers. The mapping is exposed via debugfs
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9155c9312c1..c6be19e9cea 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -116,6 +116,11 @@ ifeq ($(CONFIG_6xx),y)
 KBUILD_CFLAGS		+= -mcpu=powerpc
 endif
 
+# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
+ifeq ($(CONFIG_FTRACE),y)
+KBUILD_CFLAGS		+= -mno-sched-epilog
+endif
+
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
 cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 19f83c8f219..65d1a8454d2 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -49,7 +49,7 @@ zlib       := inffast.c inflate.c inftrees.c
 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
 zliblinuxheader := zlib.h zconf.h zutil.h
 
-$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
 	$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
@@ -163,12 +163,12 @@ quiet_cmd_flex = FLEX    $@
       cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
 
 $(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
-     $(call if_changed,bison)
+	$(call if_changed,bison)
 
 $(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
 
 $(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
-     $(call if_changed,flex)
+	$(call if_changed,flex)
 endif
 
 #############
@@ -195,7 +195,7 @@ image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
 image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
-image-$(CONFIG_PPC_HOLLY)		+= zImage.holly
+image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
 image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
 image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
 image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 705c23c14f3..2544f3ecd6e 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -18,6 +18,16 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells =<0>;
@@ -78,7 +88,7 @@
 
 		};
 
-		ethernet@6200 {
+		enet0: ethernet@6200 {
 			linux,network-index = <0>;
 			#size-cells = <0>;
 			device_type = "network";
@@ -91,7 +101,7 @@
 			phy-handle = <&phy8>;
 		};
 
-		ethernet@6600 {
+		enet1: ethernet@6600 {
 			linux,network-index = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -105,7 +115,7 @@
 			phy-handle = <&phy9>;
 		};
 
-		serial@7808 {
+		serial0: serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x7808 0x200>;
@@ -114,7 +124,7 @@
 			interrupt-parent = <&mpic>;
 		};
 
-		serial@7c08 {
+		serial1: serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x7c08 0x200>;
@@ -131,7 +141,7 @@
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
-		pci@1000 {
+		pci0: pci@1000 {
 			compatible = "tsi108-pci";
 			device_type = "pci";
 			#interrupt-cells = <1>;
@@ -184,8 +194,4 @@
 			};
 		};
 	};
-	chosen {
-		linux,stdout-path = "/tsi108@c0000000/serial@7808";
-	};
-
 };
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 3664fb58402..2a94ae0dc8b 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -109,18 +109,38 @@
 			reg = <0x200 0x100>;
 		};
 
-		i2c@3000 {
+		sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x03000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			crypto@30000 {
+				compatible = "fsl,sec2.2", "fsl,sec2.1",
+				             "fsl,sec2.0";
+				reg = <0x30000 0x10000>;
+				interrupts = <11 0x8>;
+				interrupt-parent = <&ipic>;
+				fsl,num-channels = <1>;
+				fsl,channel-fifo-len = <24>;
+				fsl,exec-units-mask = <0x4c>;
+				fsl,descriptor-types-mask = <0x0122003f>;
 			};
 		};
 
@@ -188,37 +208,44 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
 			phy_type = "utmi_wide";
+			sleep = <&pmc 0x00300000>;
 		};
 
-		mdio@24520 {
+		enet0: ethernet@24000 {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&ipic>;
-				interrupts = <19 0x8>;
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-			phy4: ethernet-phy@4 {
-				interrupt-parent = <&ipic>;
-				interrupts = <20 0x8>;
-				reg = <0x4>;
-				device_type = "ethernet-phy";
-			};
-		};
+			#size-cells = <1>;
+			sleep = <&pmc 0x20000000>;
+			ranges;
 
-		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
-			compatible = "gianfar";
+			compatible = "gianfar", "simple-bus";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 0x8 36 0x8 35 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy1 >;
+			fsl,magic-packet;
+
+			mdio@24520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x24520 0x20>;
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <19 0x8>;
+					reg = <0x1>;
+					device_type = "ethernet-phy";
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 0x8>;
+					reg = <0x4>;
+					device_type = "ethernet-phy";
+				};
+			};
 		};
 
 		enet1: ethernet@25000 {
@@ -231,6 +258,8 @@
 			interrupts = <34 0x8 33 0x8 32 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy4 >;
+			sleep = <&pmc 0x10000000>;
+			fsl,magic-packet;
 		};
 
 		serial0: serial@4500 {
@@ -253,17 +282,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <1>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x4c>;
-			fsl,descriptor-types-mask = <0x0122003f>;
-		};
-
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
@@ -277,36 +295,119 @@
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 8>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+			/* Remove this (or change to "okay") if you have
+			 * a REVA3 or later board, if you apply one of the
+			 * workarounds listed in section 8.5 of the board
+			 * manual, or if you are adapting this device tree
+			 * to a different board.
+			 */
+			status = "fail";
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 8 79 8 85 8 73 8>;
+			interrupt-parent = <&ipic>;
+		};
 	};
 
-	pci0: pci@e0008500 {
-		cell-index = <1>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x0E -mini PCI */
-				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
-				/* IDSEL 0x0F - PCI slot */
-				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
+	sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00010000>;
+		ranges;
+
+		pci0: pci@e0008500 {
+			cell-index = <1>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+					/* IDSEL 0x0E -mini PCI */
+					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+					/* IDSEL 0x0F - PCI slot */
+					 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <66 0x8>;
+			bus-range = <0x0 0x0>;
+			ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+				  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+				  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+			clock-frequency = <66666666>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <0xe0008500 0x100>;
+			compatible = "fsl,mpc8349-pci";
+			device_type = "pci";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0xe00082a8 4>;
+			ranges = <0 0xe0008100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <0>;
+			};
+
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x80 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <1>;
+			};
+
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x100 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <2>;
+			};
+
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <3>;
+			};
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 7345743d3d9..fbc930410ff 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <132000000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index e74c045a0f8..b157d1885a2 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -51,6 +51,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 8dfab566258..700e076ef3f 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -52,6 +52,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 49ca3497eef..cdd3063258e 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -50,6 +50,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index ba586cb7afb..783241c0024 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -57,6 +57,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 3701dae1ee0..a3b76a70995 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -61,6 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <264000000>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 8acd1d6577f..89c9202f8bd 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -149,18 +149,14 @@
 		};
 
 		crypto@30000 {
-			compatible = "fsl,sec2-crypto";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
-			interrupts = <11 8>;
+			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x7e>;
-			/*
-			 * desc mask is for rev1.x, we need runtime fixup
-			 * for >=2.x
-			 */
-			descriptor-types-mask = <0x1010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: interrupt-controller@700 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 0a700cb5f61..432782b6d20 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 29c8c76a58f..ed32c8ddafe 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d641a8985ea..f4db9ed4a30 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 02cfa24a169..1505d6855ef 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -49,6 +49,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;
 		bus-frequency = <0>;		// Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f2273a872b1..9568bfaff8f 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index c4469f19ff8..6480f4fd96e 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7d3829d3495..f1fb20737e3 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -54,6 +54,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index d84466bb7ec..431b496270d 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -58,6 +58,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index e03a7800628..d833a5c4f47 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index ba8159de040..4d1f2f28409 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x200>;
 		bus-frequency = <330000000>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9c30a34821d..a15f10343f5 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -60,6 +60,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 08c61e3daec..e124dd18fb5 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 981941e5d7a..584a4f184eb 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -202,6 +202,11 @@
 			fsl,has-rstcr;
 		};
 
+		wdt@e4000 {
+			compatible = "fsl,mpc8610-wdt";
+			reg = <0xe4000 0x100>;
+		};
+
 		i2s@16000 {
 			compatible = "fsl,mpc8610-ssi";
 			cell-index = <0>;
@@ -276,7 +281,7 @@
 				cell-index = <0>;
 				reg = <0x0 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <60 2>;
+				interrupts = <76 2>;
 			};
 			dma-channel@1 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -284,7 +289,7 @@
 				cell-index = <1>;
 				reg = <0x80 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <61 2>;
+				interrupts = <77 2>;
 			};
 			dma-channel@2 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -292,7 +297,7 @@
 				cell-index = <2>;
 				reg = <0x100 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <62 2>;
+				interrupts = <78 2>;
 			};
 			dma-channel@3 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -300,7 +305,7 @@
 				cell-index = <3>;
 				reg = <0x180 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <63 2>;
+				interrupts = <79 2>;
 			};
 		};
 
@@ -388,6 +393,20 @@
 					  0x01000000 0x0 0x00000000
 					  0x01000000 0x0 0x00000000
 					  0x0 0x00100000>;
+
+				isa@1e {
+					device_type = "isa";
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index ae08761ffff..d665e767822 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -411,7 +411,7 @@
 			0xe000 0 0 1 &i8259 12 2
 			0xe100 0 0 2 &i8259 9 2
 			0xe200 0 0 3 &i8259 10 2
-			0xe300 0 0 4 &i8259 112
+			0xe300 0 0 4 &i8259 11 2
 
 			// IDSEL 0x1d  Audio
 			0xe800 0 0 1 &i8259 6 2
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 64d2d5bbcdf..4199e89b4e5 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -50,13 +50,14 @@
 		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
 	};
 
-	soc8548@a0000000 {
+	soc@a0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xa0000000 0x100000>;
 		reg = <0xa0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
@@ -83,6 +84,11 @@
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@3100 {
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 2563112cabd..58ee4185454 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -50,13 +50,14 @@
 		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
 	};
 
-	soc8548@e0000000 {
+	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 340018cf16b..f4e4ba69eef 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -139,6 +139,11 @@
 					interrupt-parent = <&UIC0>;
 				};
 
+				fpga@2,2000 {
+					compatible = "pika,fpga-sgl";
+			   		reg = <0x00000002 0x00002000 0x00000200>;
+				};
+
 				fpga@2,4000 {
 					compatible = "pika,fpga-sd";
 					reg = <0x00000002 0x00004000 0x00000A00>;
@@ -152,7 +157,7 @@
 					#size-cells = <1>;
 					partition@300000 {
 						label = "fpga";
-						reg = <0x0030000 0x00040000>;
+						reg = <0x0300000 0x00040000>;
 					};
 					partition@340000 {
 						label = "env";
@@ -181,7 +186,6 @@
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
-				index = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -191,6 +195,12 @@
 					interrupts = <0x19 0x8>;
 					interrupt-parent = <&UIC0>;
 				};
+
+				/* This will create 52 and 53 */
+				at24@52 {
+					compatible = "at,24c04";
+					reg = <0x52>;
+				};
 			};
 
 			GPIO0: gpio@ef600b00 {
@@ -209,7 +219,13 @@
 				led@31 {
 					compatible = "linux,gpio-led";
 					linux,name = ":green:";
-					gpios = <&GPIO1 0x30 0>;
+					gpios = <&GPIO1 31 0>;
+				};		
+	
+				led@30 {	
+					compatible = "linux,gpio-led";
+					linux,name = ":red:";
+					gpios = <&GPIO1 30 0>;
 				};
 			};
 
diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h
index ccaedaec50d..7c09f4861fe 100644
--- a/arch/powerpc/boot/io.h
+++ b/arch/powerpc/boot/io.h
@@ -6,7 +6,7 @@
 /*
  * Low-level I/O routines.
  *
- * Copied from <file:include/asm-powerpc/io.h> (which has no copyright)
+ * Copied from <file:arch/powerpc/include/asm/io.h> (which has no copyright)
  */
 static inline int in_8(const volatile unsigned char *addr)
 {
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 644bf9d4ea0..965c237c122 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -165,7 +165,7 @@ cuboot*)
     binary=y
     gzip=
     case "$platform" in
-    *-mpc885ads|*-adder875*|*-ep88xc)
+    *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
         platformo=$object/cuboot-8xx.o
         ;;
     *5200*|*-motionpro)
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index e24240a9a04..2113ae2ab40 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:50:09 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:34:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -188,7 +201,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -206,13 +218,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -222,6 +238,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -232,6 +250,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -241,17 +260,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -289,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -340,6 +353,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -352,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -576,6 +598,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -614,12 +637,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -635,13 +655,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -658,10 +689,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -678,12 +705,16 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -701,6 +732,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -744,17 +776,16 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -769,7 +800,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -818,6 +848,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -828,14 +859,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -856,8 +885,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -867,6 +898,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -874,6 +906,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -881,9 +914,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -896,17 +932,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -918,51 +967,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 2f475391f1d..565ed9666c5 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:51:43 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:36:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -186,7 +199,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -204,13 +216,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -689,6 +712,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -699,14 +723,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -738,6 +762,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 9ef4d8a312c..987a4481800 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:52:30 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:38:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -186,7 +199,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -204,13 +216,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -220,6 +236,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -230,6 +248,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -239,17 +258,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -338,6 +351,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -350,6 +365,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -440,6 +456,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -458,12 +475,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +522,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -528,6 +549,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -566,12 +588,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -587,13 +606,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -610,22 +640,16 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -640,7 +664,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -689,6 +712,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -699,14 +723,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -727,8 +749,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -738,6 +762,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -745,6 +770,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -752,9 +778,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -767,17 +796,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -789,51 +831,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 3b2689e5002..aee79338f41 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:54:12 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 19:40:56 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -75,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -108,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -125,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,14 +155,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -189,7 +202,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -207,13 +219,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -223,6 +239,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -233,6 +251,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -242,17 +261,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -290,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -341,6 +354,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -353,6 +368,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -443,12 +459,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -466,12 +484,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -506,7 +527,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -516,12 +536,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -534,6 +554,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -541,6 +562,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -567,6 +589,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -605,12 +628,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -626,13 +646,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -649,16 +680,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -667,13 +696,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -688,7 +715,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -737,6 +763,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -747,14 +774,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -786,6 +813,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -793,6 +821,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -800,9 +829,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -815,17 +847,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -837,51 +882,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index c44db554cdc..e920693535a 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:36:39 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 08:43:44 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,13 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -129,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_BAMBOO=y
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -193,7 +210,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -211,14 +227,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -227,6 +247,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -237,6 +259,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -246,17 +269,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -294,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -345,6 +362,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -370,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -393,12 +414,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -433,7 +457,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -443,12 +466,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -461,6 +484,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -468,6 +492,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -494,6 +519,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -532,12 +558,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -553,13 +576,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -576,16 +610,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -594,13 +626,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -615,7 +645,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -663,6 +692,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -673,14 +703,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -701,8 +729,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -712,6 +742,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -719,6 +750,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -726,9 +758,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -741,19 +776,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -765,51 +811,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index a3b763c45ec..74da5c7754a 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Thu Feb 21 14:29:28 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 08:46:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -73,8 +77,9 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -83,12 +88,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
-# CONFIG_LOGBUFFER is not set
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_COMPAT_BRK=y
@@ -109,13 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -126,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -140,25 +155,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
 CONFIG_CANYONLANDS=y
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_460EX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -190,7 +205,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -208,16 +222,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -225,6 +242,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +254,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +264,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +357,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -368,6 +384,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -386,12 +403,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -430,6 +450,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -456,6 +477,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -494,16 +516,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -515,13 +535,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -538,22 +569,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -568,7 +593,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -616,6 +640,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -626,14 +651,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -654,8 +677,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -665,6 +690,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -672,6 +698,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -679,9 +706,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -694,19 +724,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -719,3 +760,4 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index 07c8d4ce175..17615750b49 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:50:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:04:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 CONFIG_EBONY=y
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GP=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -192,7 +209,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
@@ -210,13 +226,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -444,12 +464,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -467,12 +489,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -507,7 +532,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -517,12 +541,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -535,6 +559,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -542,6 +567,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -568,6 +594,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -606,12 +633,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -627,13 +651,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -650,16 +685,14 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -668,13 +701,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -689,7 +720,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -748,6 +778,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -758,14 +789,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -786,8 +815,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -798,6 +829,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -805,6 +837,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -812,9 +845,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -827,17 +863,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -849,50 +898,84 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index c8804ec01ea..7bc4082a1c9 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Mon Dec 24 11:17:43 2007
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:06:51 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,7 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -67,23 +72,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -91,11 +95,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -103,10 +109,26 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -117,6 +139,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -130,23 +153,28 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 CONFIG_KATMAI=y
 # CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440SPe=y
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -157,7 +185,6 @@ CONFIG_440SPe=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -173,13 +200,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -190,17 +221,19 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="katmai.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -208,6 +241,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -218,6 +253,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -227,17 +263,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -275,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -300,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -325,6 +356,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -346,15 +379,19 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -371,6 +408,10 @@ CONFIG_MISC_DEVICES=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -378,14 +419,12 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -414,6 +453,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -421,12 +462,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -438,6 +479,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -445,12 +488,12 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -472,7 +515,9 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -509,15 +554,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -529,13 +573,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -552,34 +607,27 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -594,14 +642,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,8 +688,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -652,14 +700,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -675,14 +721,15 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -692,10 +739,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -703,6 +747,7 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -710,10 +755,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -724,19 +773,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -747,44 +807,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index dec18ca7351..0479648a914 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:53:10 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:09:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 CONFIG_RAINIER=y
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GRX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -355,6 +374,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -445,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -475,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -492,7 +517,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -502,12 +526,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -520,6 +544,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -527,6 +552,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -553,6 +579,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -591,12 +618,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -612,13 +636,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -635,16 +670,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -653,13 +686,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -674,7 +705,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -733,6 +763,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -743,14 +774,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -771,8 +800,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -783,6 +814,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -790,6 +822,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -797,9 +830,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -812,19 +848,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -849,51 +896,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 9ce5cbc2a4e..0ed2de05f4e 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon May  5 13:43:02 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:12:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -116,15 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -135,6 +144,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -169,6 +177,7 @@ CONFIG_SAM440EP=y
 # CONFIG_WARP is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -220,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -228,6 +238,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -237,6 +248,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -263,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -353,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
@@ -379,6 +389,7 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -422,6 +433,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -481,18 +493,22 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,7 +547,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
@@ -607,12 +622,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -661,40 +678,60 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -703,10 +740,13 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -718,6 +758,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -730,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -755,7 +797,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
 CONFIG_FB_BACKLIGHT=y
@@ -795,10 +836,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -821,10 +865,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -859,11 +899,13 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -881,6 +923,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -900,6 +943,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -939,6 +983,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -976,6 +1021,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_M41T80_WDT=y
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -996,6 +1042,7 @@ CONFIG_RTC_DRV_M41T80_WDT=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -1074,6 +1121,7 @@ CONFIG_AFFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1151,6 +1199,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1177,7 +1226,15 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index dd5d6303c39..e40b1023265 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:53:46 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:15:13 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -112,13 +118,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -129,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -143,24 +159,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 CONFIG_SEQUOIA=y
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EPX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -192,7 +209,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -210,14 +226,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -226,6 +246,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -236,6 +258,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -245,17 +268,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,8 +312,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -344,6 +361,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -356,6 +375,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -446,12 +466,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -469,12 +491,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,7 +534,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -519,12 +543,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -537,6 +561,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -544,6 +569,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -570,6 +596,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -608,12 +635,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -629,13 +653,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -652,16 +687,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -670,13 +703,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -691,7 +722,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -750,6 +780,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -760,14 +791,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -788,8 +817,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -800,6 +831,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -807,6 +839,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -814,9 +847,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -829,19 +865,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -866,51 +913,85 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index e53c92655bd..5075873bdb1 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:40:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:17:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,8 +29,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -78,6 +82,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -86,6 +91,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,24 +158,25 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 CONFIG_TAISHAN=y
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 # CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440GX=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -225,6 +245,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -235,6 +257,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -244,17 +267,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -292,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -343,6 +360,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -354,6 +373,8 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -444,12 +465,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -467,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -474,7 +501,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,7 +535,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -519,12 +544,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -537,6 +562,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -544,6 +570,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -570,6 +597,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -608,12 +636,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -629,13 +654,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -652,16 +688,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -670,13 +704,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -691,7 +723,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -740,6 +771,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -750,14 +782,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -778,8 +808,10 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -789,6 +821,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -796,6 +829,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -803,9 +837,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -818,19 +855,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
-# CONFIG_KGDB is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -842,51 +890,85 @@ CONFIG_DEBUGGER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 9c41f66b5a7..663ec512b33 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  2 15:36:41 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:20:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,9 +29,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -115,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -135,6 +143,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,13 +163,12 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
@@ -221,6 +229,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -239,6 +248,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -265,10 +275,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -446,7 +452,9 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -471,12 +479,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,7 +513,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -532,7 +541,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -547,6 +555,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -619,12 +628,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -670,39 +681,59 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -711,10 +742,13 @@ CONFIG_I2C_DEBUG_ALGO=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -726,6 +760,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -799,6 +834,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_XILINX=y
 # CONFIG_FB_VIRTUAL is not set
@@ -831,10 +867,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -910,6 +942,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -920,17 +953,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=y
@@ -994,6 +1026,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1018,7 +1051,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1071,6 +1113,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 2313c3e8ef6..d9375a969c6 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:54:43 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 09:23:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,8 +30,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -79,6 +83,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -87,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -111,13 +117,22 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -128,6 +143,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,23 +158,24 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
 # CONFIG_SEQUOIA is not set
 # CONFIG_TAISHAN is not set
 # CONFIG_KATMAI is not set
 # CONFIG_RAINIER is not set
 CONFIG_WARP=y
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -191,7 +208,6 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
@@ -209,14 +225,18 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="ip=on"
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -224,10 +244,13 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -237,17 +260,13 @@ CONFIG_ZONE_DMA=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,8 +310,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -318,6 +335,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
@@ -368,6 +386,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -446,6 +465,7 @@ CONFIG_MTD_NAND_IDS=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -460,6 +480,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -504,11 +525,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -538,6 +559,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -571,6 +593,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -608,44 +631,49 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_IBM_IIC is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -658,6 +686,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -698,6 +727,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -709,13 +739,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -730,10 +771,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -750,11 +787,15 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -770,6 +811,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -790,6 +832,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -825,6 +868,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
@@ -836,19 +880,19 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -863,7 +907,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -924,6 +967,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -934,14 +978,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1001,8 +1043,10 @@ CONFIG_NLS_UTF8=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1013,6 +1057,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1020,6 +1065,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1027,9 +1073,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1041,17 +1090,30 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1063,48 +1125,82 @@ CONFIG_BDI_SWITCH=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
new file mode 100644
index 00000000000..5e6780a088c
--- /dev/null
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -0,0 +1,1334 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:01 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_IPIC=y
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_ISA is not set
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 5428f9f5ed8..2028337868b 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:21 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:17 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC831x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -452,9 +478,11 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -553,7 +583,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -570,12 +603,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -602,6 +638,8 @@ CONFIG_CICADA_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -638,7 +676,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -652,9 +689,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -752,11 +790,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -768,43 +809,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -828,11 +896,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -841,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -886,6 +959,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -893,7 +967,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -915,8 +991,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -949,10 +1027,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -986,6 +1060,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1009,6 +1084,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1037,6 +1113,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1045,7 +1122,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1058,7 +1134,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1085,7 +1160,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1103,6 +1178,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1138,10 +1214,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1240,6 +1319,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1250,14 +1330,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1297,6 +1376,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1323,6 +1403,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1340,19 +1422,32 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1406,6 +1501,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1438,5 +1537,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 9bc3a03ae26..dd80eb0a87a 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:21 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC831x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -452,9 +478,11 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -554,7 +584,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -631,12 +664,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -663,6 +699,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -699,7 +737,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -713,9 +750,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -813,11 +851,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -829,43 +870,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -889,11 +957,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -902,6 +974,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -947,6 +1020,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -954,7 +1028,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -976,8 +1052,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1010,10 +1088,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1047,6 +1121,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1070,6 +1145,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1098,6 +1174,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1106,7 +1183,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1119,7 +1195,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1146,7 +1221,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1164,6 +1239,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1199,10 +1275,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1301,6 +1380,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1311,14 +1391,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1358,6 +1437,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1384,6 +1464,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1401,19 +1483,32 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1467,6 +1562,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1499,5 +1598,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 1eca26f3659..bdf50c8a17e 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:22 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 CONFIG_MPC832x_MDS=y
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC832x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -196,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -365,6 +391,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -380,12 +407,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -462,7 +491,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -470,12 +502,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +537,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -519,7 +556,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -534,12 +570,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -628,12 +665,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -645,42 +685,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -689,10 +756,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -702,6 +772,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -746,6 +817,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -753,7 +825,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -770,8 +844,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -803,10 +879,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -821,6 +893,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -859,6 +935,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -947,6 +1024,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -957,14 +1035,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -994,6 +1071,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1002,6 +1080,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1027,8 +1106,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1082,6 +1171,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1114,6 +1207,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index de95d327463..4eef8c95480 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 CONFIG_MPC832x_RDB=y
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC832x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -196,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -362,9 +388,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -381,12 +409,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -463,7 +493,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -471,12 +504,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -503,6 +539,8 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -520,10 +558,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -538,12 +574,13 @@ CONFIG_E1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-CONFIG_UGETH_NAPI=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -641,12 +678,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -660,43 +700,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -719,11 +786,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -732,6 +803,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -777,6 +849,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -784,7 +857,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -806,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -840,10 +917,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -877,6 +950,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -928,6 +1002,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -936,7 +1011,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -949,7 +1023,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1063,6 +1136,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1073,14 +1147,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1154,6 +1227,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1162,6 +1236,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
@@ -1187,8 +1262,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1242,6 +1327,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1274,6 +1363,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index b47fc918570..8d651393185 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:25 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -458,18 +486,17 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -545,7 +572,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -623,12 +653,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -659,7 +692,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -673,9 +705,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -753,11 +786,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -769,43 +805,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -828,10 +891,13 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -839,7 +905,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -861,8 +929,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -895,10 +965,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -917,6 +983,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -960,6 +1027,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -968,7 +1036,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -981,7 +1048,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1035,10 +1101,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1130,6 +1199,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1140,14 +1210,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1226,6 +1295,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1251,8 +1321,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1306,6 +1386,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1338,5 +1422,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index fdac4845bad..a8afa39d6f7 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -458,12 +486,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -540,7 +570,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -548,12 +581,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -584,7 +620,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -598,9 +633,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -678,11 +714,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -694,43 +733,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -753,10 +819,13 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -764,7 +833,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -786,8 +857,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -820,10 +893,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -842,6 +911,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -885,6 +955,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -893,7 +964,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -906,7 +976,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -959,10 +1028,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1054,6 +1126,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1064,14 +1137,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1150,6 +1222,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1175,8 +1248,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1230,6 +1313,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1262,5 +1349,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index c82e96e984f..24c320a3667 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 CONFIG_MPC834x_MDS=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +389,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -401,12 +430,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -433,6 +465,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -468,7 +502,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -482,9 +515,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -572,11 +606,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -588,42 +625,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -632,10 +696,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -645,6 +712,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -689,6 +757,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -696,7 +765,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -713,8 +784,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -746,10 +819,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -764,6 +833,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -802,6 +875,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -890,6 +964,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -900,14 +975,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -943,6 +1017,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -968,8 +1043,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1023,6 +1108,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1055,5 +1144,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 20fd9f58cf4..e029e9e1462 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:27 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:22 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,36 +161,48 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 CONFIG_MPC836x_MDS=y
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +389,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,7 +489,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -468,12 +500,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -500,6 +535,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -517,7 +554,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -532,12 +568,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -626,12 +663,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -643,42 +683,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -687,10 +754,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -700,6 +770,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -744,6 +815,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -751,7 +823,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -768,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -801,10 +877,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -819,6 +891,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -857,6 +933,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -945,6 +1022,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -955,14 +1033,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -992,6 +1069,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1000,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1025,8 +1104,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1080,6 +1169,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1112,6 +1205,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index d2c435f0da4..7d674be702f 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Mon May 19 21:12:32 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:24 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -52,6 +54,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -89,12 +94,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,16 +162,18 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
@@ -170,17 +184,26 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -207,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,12 +259,15 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
 CONFIG_FSL_LBC=y
 CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -263,10 +292,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -449,9 +476,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -467,12 +496,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,12 +521,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -526,7 +560,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -541,12 +574,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-CONFIG_UGETH_NAPI=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -602,6 +636,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -625,12 +660,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -643,43 +681,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -703,26 +768,33 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -730,7 +802,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -747,9 +821,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -799,6 +874,9 @@ CONFIG_FB_MACMODES=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -821,6 +899,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -846,10 +925,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -941,6 +1016,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -951,14 +1027,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -998,6 +1073,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1025,12 +1101,22 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_LPAR is not set
 # CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y
 # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
 # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
 # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
@@ -1091,6 +1177,10 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1123,6 +1213,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 0f94d9f56be..de472022aa8 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:28 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:23 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 CONFIG_MPC837x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -360,19 +390,30 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -415,24 +456,128 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -452,16 +597,56 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -470,8 +655,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -515,12 +703,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -531,40 +721,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -573,10 +813,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -586,8 +829,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -609,13 +854,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -626,6 +874,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -633,7 +882,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Sonics Silicon Backplane
@@ -644,8 +901,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -666,6 +925,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -675,10 +936,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -686,13 +943,17 @@ CONFIG_HID=y
 # CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -700,6 +961,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -769,6 +1031,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -779,14 +1042,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -826,6 +1088,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -849,8 +1112,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -904,6 +1177,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -935,5 +1212,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 0d448556f53..e8d2d691d26 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Tue Jun 10 09:17:12 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 CONFIG_MPC837x_RDB=y
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -355,10 +385,16 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -366,9 +402,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -411,14 +452,106 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -430,15 +563,27 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -458,16 +603,44 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -485,8 +658,11 @@ CONFIG_GFAR_NAPI=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -530,12 +706,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -546,41 +724,91 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -589,10 +817,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -602,8 +833,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -625,13 +858,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -642,6 +878,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -649,7 +886,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # USB-based Watchdog Cards
@@ -665,8 +910,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -688,6 +935,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -697,10 +946,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -716,7 +961,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
@@ -731,6 +976,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -743,6 +989,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -768,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -781,7 +1028,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -803,6 +1049,7 @@ CONFIG_USB_MON=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -872,6 +1119,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -882,14 +1130,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -929,6 +1176,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -952,8 +1200,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1011,6 +1269,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1042,5 +1304,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1752918be2c..9245a67da20 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:30 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:27 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -110,10 +115,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,12 +135,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -148,37 +160,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -204,6 +228,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -216,6 +241,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +249,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -230,15 +257,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -254,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -358,19 +388,30 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -383,15 +424,27 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -411,16 +464,44 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -429,6 +510,8 @@ CONFIG_GIANFAR=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NETCONSOLE is not set
@@ -474,12 +557,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -490,40 +575,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -532,10 +667,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -545,8 +683,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -568,13 +708,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -585,6 +728,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -592,7 +736,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Sonics Silicon Backplane
@@ -603,8 +755,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -625,6 +779,8 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -634,10 +790,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -648,6 +800,7 @@ CONFIG_HID=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -710,6 +863,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -720,14 +874,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -740,6 +893,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
@@ -751,6 +905,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -774,8 +929,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -829,6 +994,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index b82bb042308..8bb89f26a20 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:30 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:28 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -85,7 +88,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -110,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,6 +132,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,8 +151,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -152,11 +159,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -173,7 +182,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -229,6 +239,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -250,10 +261,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -427,6 +434,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -440,12 +448,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -463,11 +471,8 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -480,7 +485,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -504,6 +508,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -516,9 +521,7 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -606,6 +609,23 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -622,6 +642,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -633,8 +654,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -664,10 +687,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -681,6 +700,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -759,6 +782,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -768,12 +792,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -809,6 +832,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -833,6 +857,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -851,17 +877,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -915,6 +953,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -946,6 +988,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
new file mode 100644
index 00000000000..6b516bea6e7
--- /dev/null
+++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
@@ -0,0 +1,1654 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:18:18 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+CONFIG_MPC8536_DS=y
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=524288
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+CONFIG_SKGE=y
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
+# CONFIG_DVB_L64781 is not set
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# SEC control devices for DVB-S
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
+# CONFIG_DVB_ISL6421 is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index f33fd516fd5..1ea181f826f 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:31 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:30 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +115,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +162,13 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -192,7 +200,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -231,6 +241,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -252,10 +263,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -367,6 +374,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -384,7 +392,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -416,9 +423,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -504,6 +509,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -520,6 +527,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -531,8 +539,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -562,10 +572,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -579,6 +585,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -655,6 +665,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -664,12 +675,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -705,6 +715,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -729,6 +740,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -746,16 +759,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -808,6 +834,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -839,5 +869,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index 042a85ea7b7..1aecdeab984 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:32 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:20:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +172,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 CONFIG_MPC85xx_DS=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -202,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -768,43 +784,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -984,39 +1028,29 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1078,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1142,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1193,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1201,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1214,7 +1222,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1268,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1301,6 +1309,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1377,6 +1386,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1389,17 +1399,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1478,6 +1487,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1503,6 +1513,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1521,17 +1533,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1548,13 +1572,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1588,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1620,5 +1649,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index e19592b4204..06e26d906f6 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:32 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +136,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +155,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +163,13 @@ CONFIG_MPC85xx=y
 CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -177,7 +186,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -217,6 +225,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -235,6 +245,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +272,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +370,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -381,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -404,12 +414,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -456,10 +469,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -473,9 +484,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -582,6 +593,24 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -602,6 +631,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -613,8 +643,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -646,10 +678,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -664,6 +692,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -741,6 +773,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -750,12 +783,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -791,6 +823,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -815,6 +848,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -832,17 +867,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -895,6 +942,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -927,6 +978,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 28004e93aee..dc27c74955f 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:34 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -112,10 +113,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +133,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,8 +158,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -160,11 +166,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC85xx_MDS=y
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -197,7 +205,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -220,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -227,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -238,6 +248,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -264,10 +275,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -385,12 +392,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +477,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -475,12 +485,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -524,7 +537,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -538,10 +550,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -648,42 +660,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -692,10 +725,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -749,6 +785,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -756,6 +793,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_BOOKE_WDT is not set
 
 #
@@ -773,8 +811,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -806,10 +846,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -824,6 +860,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -862,6 +902,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -950,6 +991,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -960,14 +1002,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -995,6 +1036,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1003,6 +1045,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1027,6 +1070,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1044,17 +1089,28 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1122,6 +1178,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1154,6 +1214,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 03627cfebcb..eda45bb8a13 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:35 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:21:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +172,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 CONFIG_MPC85xx_DS=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -202,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -768,43 +784,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -984,39 +1028,29 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1078,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1142,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1193,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1201,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1214,7 +1222,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1268,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1366,6 +1374,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1378,17 +1387,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1467,6 +1475,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1492,6 +1501,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1510,17 +1521,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1537,13 +1560,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1577,6 +1601,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1609,5 +1637,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index b09f0032a10..97f3c4fe440 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:36 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:34 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +115,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +162,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -192,7 +200,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -233,6 +243,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +270,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -379,20 +386,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -405,7 +414,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -423,10 +431,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -444,8 +450,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -461,12 +465,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,10 +516,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -526,9 +531,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -634,6 +639,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -654,6 +661,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -665,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -698,10 +708,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -716,6 +722,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -793,6 +803,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -802,12 +813,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -843,6 +853,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -867,6 +878,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -884,16 +897,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -946,6 +972,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -978,5 +1008,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 24f7f44b482..41cedc4b63f 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:37 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -112,10 +113,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +133,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +160,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 CONFIG_SBC8548=y
@@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -231,6 +241,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -256,10 +267,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -374,12 +381,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -397,12 +406,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -446,7 +458,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -460,9 +471,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -568,6 +579,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -588,6 +601,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -599,8 +613,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -632,10 +648,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -706,6 +718,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -715,12 +728,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -744,6 +756,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -767,7 +780,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -819,6 +841,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -851,5 +877,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 655518dcd73..daef36f41b4 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:38 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:36 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,10 +114,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -127,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -155,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -230,6 +240,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -251,10 +262,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -366,6 +373,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -383,7 +391,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -415,9 +422,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -501,6 +506,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -517,6 +524,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -528,8 +536,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -559,10 +569,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -576,6 +582,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -679,6 +689,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -688,12 +699,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -729,6 +739,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -753,6 +764,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -769,16 +782,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -842,6 +868,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -873,5 +903,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 7804ca1ecc9..2b05d43f8f7 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:38 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -134,6 +142,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -152,8 +161,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -162,11 +169,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -183,7 +192,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -223,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -230,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -241,6 +251,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -267,10 +278,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -426,6 +433,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
@@ -452,15 +460,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -480,7 +489,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -493,10 +501,8 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -514,8 +520,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -594,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -601,12 +606,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -652,7 +660,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -666,9 +673,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -731,6 +738,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -741,7 +749,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -757,6 +767,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -805,44 +816,68 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -850,10 +885,32 @@ CONFIG_I2C_CHARDEV=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -907,6 +964,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -918,8 +976,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -958,20 +1018,8 @@ CONFIG_DRM=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -986,6 +1034,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1070,6 +1122,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1080,13 +1133,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1150,6 +1202,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1175,6 +1228,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1193,18 +1248,29 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1258,6 +1324,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1290,6 +1360,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index e0b5559e84a..1b2d5d57791 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:39 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +113,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +133,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +160,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,6 +242,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -255,10 +266,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,20 +456,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -475,7 +484,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -493,10 +501,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -514,8 +520,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -531,12 +535,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -598,7 +605,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -612,9 +618,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -721,41 +727,62 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -764,10 +791,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -821,6 +851,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -832,8 +863,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -865,10 +898,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -883,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -971,6 +1004,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,12 +1014,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1021,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1048,7 +1082,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1100,6 +1143,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1132,5 +1179,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 6f9067b49e0..da841a09755 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:40 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index b3b770be3cc..ca1234d2685 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Thu Jun 26 14:40:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -116,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,8 +161,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -164,6 +169,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
@@ -187,7 +193,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -203,7 +208,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -226,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -233,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -244,7 +251,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -273,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -455,7 +458,6 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
-CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -490,20 +492,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -516,7 +520,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -534,10 +537,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -555,8 +556,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -572,12 +571,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -620,10 +622,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -637,9 +637,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -744,42 +744,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -788,10 +809,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -845,6 +869,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -856,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -889,10 +916,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -907,6 +930,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -945,6 +972,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1031,9 +1059,11 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1043,12 +1073,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1084,6 +1113,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1108,6 +1138,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1125,17 +1157,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1189,6 +1233,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1221,5 +1269,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 03120b5b52f..dcf9cfe28b5 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 CONFIG_TQM8555=y
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 3113257edf5..8d676629cdb 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:42 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 CONFIG_TQM8560=y
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -894,6 +945,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 6740f2a3aa3..63cd51fbb4b 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:08 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:00 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -109,10 +110,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -122,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -140,8 +148,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -159,6 +165,7 @@ CONFIG_PPC_ADDER875=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -177,7 +184,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -218,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -257,10 +265,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -443,7 +447,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -547,6 +550,7 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -587,6 +591,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -602,8 +608,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -633,10 +641,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -706,6 +710,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -716,13 +721,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -761,6 +765,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -785,6 +790,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -800,16 +807,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -822,6 +841,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/asp8347_defconfig b/arch/powerpc/configs/asp8347_defconfig
deleted file mode 100644
index 60bb4d106c8..00000000000
--- a/arch/powerpc/configs/asp8347_defconfig
+++ /dev/null
@@ -1,1214 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue May  6 02:21:00 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_REDBOOT=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-CONFIG_ASP834x=y
-CONFIG_PPC_MPC834x=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_OF_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index dc599c7e97d..c16521ffb47 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Thu May 15 11:00:14 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:02 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -97,7 +98,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -124,11 +124,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -145,6 +151,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -164,19 +171,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
@@ -253,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -260,6 +267,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_SECCOMP=y
@@ -301,10 +309,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -318,6 +322,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -349,7 +354,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -472,6 +477,7 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -495,6 +501,7 @@ CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -507,6 +514,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -535,8 +543,10 @@ CONFIG_ATM_LANE=m
 # CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -556,7 +566,6 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -601,7 +610,6 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
 CONFIG_BT_HIDP=m
 
 #
@@ -609,6 +617,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -625,6 +634,7 @@ CONFIG_FIB_RULES=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -645,6 +655,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +761,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -844,6 +857,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -851,12 +865,15 @@ CONFIG_SCSI_LPFC=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -900,7 +917,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -916,6 +932,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -940,112 +957,13 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=m
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_ISDN=m
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-# CONFIG_ISDN_PPP_BSDCOMP is not set
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DRV_LOOP=m
-# CONFIG_ISDN_DIVERSION is not set
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-# CONFIG_HISAX_HFC4S8S is not set
-CONFIG_HISAX_FRITZ_PCIPNP=m
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-# CONFIG_ISDN_DRV_GIGASET is not set
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
@@ -1092,6 +1010,7 @@ CONFIG_INPUT_UINPUT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1145,44 +1064,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+CONFIG_I2C_MV64XXX=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=m
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1191,10 +1131,13 @@ CONFIG_SENSORS_PCF8591=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1255,6 +1198,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_MV64X60_WDT is not set
 
 #
@@ -1278,8 +1222,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1290,6 +1236,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1316,10 +1263,6 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_HID=m
@@ -1339,6 +1282,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1363,10 +1307,15 @@ CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_R8A66597_HCD is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1388,6 +1337,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1396,7 +1346,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1405,7 +1354,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1443,6 +1391,7 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
@@ -1464,7 +1413,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
@@ -1481,6 +1429,7 @@ CONFIG_USB_LED=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 # CONFIG_USB_CXACRU is not set
@@ -1601,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1611,8 +1561,8 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -1620,7 +1570,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1705,6 +1654,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1732,6 +1682,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1750,6 +1702,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1758,11 +1711,22 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
@@ -1776,7 +1740,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
@@ -1835,6 +1798,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 05360d4ef1b..2e0ef8c1822 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:00:44 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:12:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -117,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,19 +164,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
@@ -201,7 +207,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -268,10 +276,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -398,7 +402,9 @@ CONFIG_NF_NAT_SIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -440,6 +448,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
@@ -454,7 +463,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -472,10 +480,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -493,8 +499,6 @@ CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -588,6 +592,7 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -595,12 +600,15 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -660,14 +668,12 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=y
 # CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -683,6 +689,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -773,6 +780,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -798,12 +806,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -848,46 +858,71 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_ISA is not set
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -896,10 +931,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -911,8 +949,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -997,10 +1037,13 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1030,10 +1073,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1062,6 +1101,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1087,6 +1127,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1108,6 +1149,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1116,7 +1158,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1129,7 +1170,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1146,6 +1186,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1226,6 +1267,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1310,6 +1352,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1336,6 +1379,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1354,20 +1399,32 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1424,6 +1481,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ba2a463b930..ef0c6e80050 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:09 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -105,10 +110,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -118,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -136,33 +148,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 # CONFIG_MPC8272_ADS is not set
 # CONFIG_PQ2FADS is not set
 CONFIG_EP8248E=y
 # CONFIG_PQ2ADS is not set
 CONFIG_8260=y
 CONFIG_8272=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -197,6 +219,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -204,6 +227,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -211,13 +235,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -233,10 +266,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -410,11 +439,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -434,16 +465,23 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -457,14 +495,25 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
+#
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -482,21 +531,59 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
 # CONFIG_FS_ENET_MDIO_FCC is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -505,6 +592,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NETPOLL is not set
@@ -541,6 +629,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -549,21 +638,44 @@ CONFIG_SERIAL_CPM_SCC1=y
 CONFIG_SERIAL_CPM_SCC4=y
 # CONFIG_SERIAL_CPM_SMC1 is not set
 # CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -575,8 +687,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -597,6 +711,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -606,16 +722,13 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
@@ -675,6 +788,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -684,8 +798,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -763,6 +877,7 @@ CONFIG_NLS_UTF8=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -804,19 +919,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -824,6 +951,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -864,6 +992,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -894,6 +1026,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index ac72b48542d..480225be2f3 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:09 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:04 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -108,10 +109,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -121,6 +128,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -158,6 +164,7 @@ CONFIG_PPC_EP88XC=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -176,7 +183,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -193,7 +199,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -217,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -256,10 +264,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -442,7 +446,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -544,10 +547,13 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -559,8 +565,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -590,10 +598,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -662,6 +666,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -672,13 +677,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -717,6 +721,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -741,6 +746,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -756,16 +763,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -777,6 +796,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 0ccc6e493dc..cfa5d053ee5 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Mon Jun 16 21:08:31 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:15:06 2008
 #
 CONFIG_PPC64=y
 
@@ -13,6 +13,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -30,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -94,9 +96,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -121,10 +122,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -140,6 +147,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -160,13 +168,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
@@ -224,7 +227,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -256,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -265,6 +269,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
@@ -290,10 +295,6 @@ CONFIG_PCI_MSI=y
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -307,6 +308,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -422,6 +424,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -449,12 +453,14 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -462,6 +468,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -492,10 +499,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +521,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -592,6 +595,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -675,29 +679,21 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
@@ -712,7 +708,6 @@ CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -720,7 +715,23 @@ CONFIG_BONDING=m
 CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -740,10 +751,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -758,6 +767,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -855,6 +865,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -869,12 +880,14 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -909,44 +922,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -955,10 +993,13 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -970,8 +1011,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1050,10 +1093,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1077,15 +1123,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1103,19 +1141,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1177,20 +1209,9 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1198,30 +1219,11 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1256,6 +1258,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1306,6 +1309,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1314,7 +1318,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1323,7 +1326,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1383,7 +1385,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1497,6 +1498,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1519,7 +1521,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1603,6 +1604,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1629,8 +1631,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1644,22 +1648,37 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -1718,6 +1737,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 63f0bdb6340..2c3f13577f4 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:01:36 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:15:49 2008
 #
 CONFIG_PPC64=y
 
@@ -31,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -94,9 +95,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -120,10 +120,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -159,9 +166,6 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 CONFIG_LPARCFG=y
 CONFIG_PPC_ISERIES=y
@@ -173,8 +177,6 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -211,7 +213,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -241,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -250,6 +253,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -274,10 +278,6 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,6 +291,7 @@ CONFIG_XFRM_USER=m
 CONFIG_XFRM_SUB_POLICY=y
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -480,7 +481,9 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -504,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -588,6 +593,7 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -612,12 +618,15 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -655,6 +664,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
@@ -662,10 +672,8 @@ CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -680,6 +688,7 @@ CONFIG_E1000=m
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -767,6 +776,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -789,6 +799,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_ISERIES=y
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -803,10 +814,13 @@ CONFIG_MAX_RAW_DEVS=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -818,8 +832,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -858,10 +874,6 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -910,7 +922,6 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
 CONFIG_GFS2_FS_LOCKING_DLM=m
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -967,6 +978,7 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -989,7 +1001,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1059,6 +1070,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1089,8 +1101,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1104,22 +1118,37 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1178,6 +1207,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 48434c2c762..6fc4c212775 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:10 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:05 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -158,25 +165,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 CONFIG_LINKSTATION=y
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
@@ -207,7 +214,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -230,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -237,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -273,10 +282,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -461,6 +466,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 CONFIG_IEEE80211_DEBUG=y
@@ -480,7 +486,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -592,12 +600,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -676,6 +686,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -743,12 +754,15 @@ CONFIG_PATA_SIL680=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -785,14 +799,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -803,6 +815,7 @@ CONFIG_R8169=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -889,12 +902,14 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -934,43 +949,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -979,10 +1015,13 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -1036,6 +1075,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1047,8 +1087,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1086,10 +1128,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -1121,6 +1159,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1172,6 +1211,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1180,7 +1220,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1190,7 +1229,6 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1237,7 +1275,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1291,6 +1328,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1392,6 +1430,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1402,11 +1441,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1414,7 +1453,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1482,6 +1520,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1510,6 +1549,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1527,17 +1568,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1556,6 +1609,7 @@ CONFIG_CRYPTO=y
 #
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1594,6 +1648,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1627,5 +1685,6 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 7a166a39d92..1a3b6423222 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:26 2007
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:18:58 2008
 #
 CONFIG_PPC64=y
 
@@ -27,7 +27,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -67,16 +72,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,10 +112,28 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -114,6 +143,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -128,29 +158,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -166,7 +193,6 @@ CONFIG_PPC_970_NAP=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -181,16 +207,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -207,18 +236,21 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 # CONFIG_PPC_HAS_HASH_64K is not set
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -237,11 +269,10 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
-
-#
-# Networking
-#
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
 
 #
@@ -254,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -284,8 +316,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -308,7 +338,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -334,12 +366,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -354,24 +389,30 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -381,14 +422,13 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -399,10 +439,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -419,10 +457,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -483,6 +518,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 CONFIG_SCSI_IPR=y
@@ -496,9 +532,13 @@ CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -508,7 +548,6 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -537,6 +576,7 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -551,27 +591,47 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -587,7 +647,6 @@ CONFIG_MII=y
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
@@ -598,18 +657,21 @@ CONFIG_AMD8111_ETH=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -617,12 +679,12 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -632,9 +694,10 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -642,6 +705,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -657,7 +721,6 @@ CONFIG_USB_PEGASUS=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -702,10 +765,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -742,16 +808,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -759,32 +823,47 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -793,15 +872,14 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -813,13 +891,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -842,10 +932,6 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -865,6 +951,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -873,15 +960,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -896,6 +986,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -912,20 +1003,15 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -943,6 +1029,7 @@ CONFIG_USB_SERIAL_CYPRESS_M8=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -962,9 +1049,11 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -974,7 +1063,6 @@ CONFIG_USB_SERIAL_TI=m
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
@@ -982,7 +1070,6 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -999,24 +1086,16 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1037,12 +1116,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1088,8 +1165,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1097,16 +1177,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1177,14 +1255,15 @@ CONFIG_NLS_DEFAULT="utf-8"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1194,7 +1273,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1202,6 +1281,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1209,34 +1289,59 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -1249,44 +1354,84 @@ CONFIG_BOOTX_TEXT=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 066c583c1f8..ab5199f26a2 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:11 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:06 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -88,7 +89,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -112,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +132,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,25 +152,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 CONFIG_MPC7448HPC2=y
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_TSI108_BRIDGE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -192,7 +199,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -256,10 +265,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -374,12 +379,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -457,6 +464,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -523,12 +531,15 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -594,7 +605,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -611,6 +621,7 @@ CONFIG_TSI108_ETH=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -716,6 +727,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -736,6 +749,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -747,8 +761,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -780,10 +796,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -798,6 +810,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -875,6 +891,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -884,12 +901,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -929,6 +945,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -954,7 +971,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1007,6 +1033,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 30d7834b7db..7c435c84c87 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:12 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:07 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -106,10 +111,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -119,6 +130,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -137,14 +149,16 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 CONFIG_MPC8272_ADS=y
 # CONFIG_PQ2FADS is not set
 # CONFIG_EP8248E is not set
@@ -152,19 +166,27 @@ CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_8272=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -181,7 +203,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -242,10 +268,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -446,9 +468,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -460,6 +484,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -480,13 +505,12 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -510,8 +534,11 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -533,7 +560,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -545,6 +571,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -610,6 +637,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -620,6 +648,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -634,6 +663,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -654,6 +684,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -666,6 +697,8 @@ CONFIG_SERIAL_CPM_SCC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -676,10 +709,28 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -691,8 +742,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -724,10 +777,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -798,6 +847,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -807,8 +857,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -888,6 +938,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -914,6 +965,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -931,19 +984,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -951,6 +1016,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -991,6 +1057,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1021,6 +1091,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 4293c8be06e..916e3df7cc4 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:14 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:16:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,12 +33,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -51,6 +54,10 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +95,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +119,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +139,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,40 +164,52 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 CONFIG_MPC832x_MDS=y
 CONFIG_MPC832x_RDB=y
 CONFIG_MPC834x_MDS=y
 CONFIG_MPC834x_ITX=y
 CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
 CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
+CONFIG_ASP834x=y
 CONFIG_PPC_MPC831x=y
 CONFIG_PPC_MPC832x=y
 CONFIG_PPC_MPC834x=y
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -211,6 +237,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -223,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -230,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -237,15 +266,24 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -261,10 +299,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -412,11 +446,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -434,10 +470,12 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_NAND_FSL_UPM is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -445,14 +483,21 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -460,9 +505,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -505,24 +555,128 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -542,21 +696,60 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -574,8 +767,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -619,12 +815,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -635,43 +833,95 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -679,10 +929,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -692,8 +963,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -715,13 +988,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -732,6 +1008,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -739,7 +1016,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # USB-based Watchdog Cards
@@ -755,8 +1040,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -778,6 +1065,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -787,10 +1076,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -806,7 +1091,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
@@ -821,6 +1106,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -833,6 +1119,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -858,7 +1146,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -871,7 +1158,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -893,6 +1179,7 @@ CONFIG_USB_MON=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -963,6 +1250,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -973,14 +1261,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1014,6 +1301,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+CONFIG_QE_GPIO=y
 
 #
 # Library routines
@@ -1022,6 +1310,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1045,8 +1334,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1061,12 +1360,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1100,6 +1401,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1131,6 +1436,8 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8536_ds_defconfig b/arch/powerpc/configs/mpc8536_ds_defconfig
deleted file mode 100644
index f1e2931de5d..00000000000
--- a/arch/powerpc/configs/mpc8536_ds_defconfig
+++ /dev/null
@@ -1,1637 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  2 01:34:26 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-CONFIG_MPC8536_DS=y
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=524288
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_CINERGYT2 is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 3efab71a603..f0a13bebf50 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 09:03:46 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:15:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -92,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +120,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +165,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +173,13 @@ CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
+CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
+CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
@@ -189,7 +198,6 @@ CONFIG_PPC_I8259=y
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 
@@ -206,7 +214,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -229,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -236,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -248,6 +258,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -274,10 +285,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -403,12 +410,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -429,12 +439,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -514,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -581,12 +594,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -631,7 +647,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -645,10 +660,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -725,12 +740,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -776,44 +793,68 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -821,10 +862,32 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -836,8 +899,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -879,6 +944,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -925,6 +991,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -992,39 +1059,29 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1086,39 +1143,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1150,6 +1180,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1173,6 +1204,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1201,6 +1233,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1209,7 +1242,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1222,7 +1254,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1283,6 +1314,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1316,6 +1348,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1330,6 +1363,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1392,6 +1426,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1404,17 +1439,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1485,6 +1519,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1493,6 +1528,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1513,11 +1549,13 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1536,19 +1574,31 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
+CONFIG_VIRQ_DEBUG=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1604,6 +1654,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1636,6 +1690,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 5612d40d046..1a9990731eb 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:50:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:10 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +52,8 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -97,6 +99,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -115,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -135,6 +144,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -153,31 +163,42 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
 CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+CONFIG_FSL_ULI1575=y
 
 #
 # Kernel options
@@ -192,7 +213,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -202,6 +223,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -214,6 +236,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +244,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -228,11 +252,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +286,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -373,6 +395,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -469,6 +493,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -484,18 +509,17 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -571,7 +595,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -639,12 +666,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -655,6 +685,8 @@ CONFIG_DUMMY=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -729,12 +761,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -762,14 +796,16 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -778,42 +814,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -822,10 +885,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -837,8 +903,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -888,6 +956,9 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_OF is not set
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -910,6 +981,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_FSL_DIU=y
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -928,15 +1000,7 @@ CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -950,18 +1014,12 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1023,35 +1081,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# System on Chip audio support
-#
+CONFIG_SND_PPC=y
+# CONFIG_SND_POWERMAC is not set
+# CONFIG_SND_AOA is not set
 CONFIG_SND_SOC=y
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
 CONFIG_SND_SOC_MPC8610=y
 CONFIG_SND_SOC_MPC8610_HPCD=y
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
 CONFIG_SND_SOC_CS4270=y
 CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1066,6 +1103,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1075,7 +1116,57 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -1143,6 +1234,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1153,16 +1245,15 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1242,6 +1333,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1266,6 +1358,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1284,19 +1378,32 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1348,6 +1455,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1380,6 +1491,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 4a817150739..ea09be31b6e 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:15 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,30 +165,40 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_FSL_ULI1575=y
 
 #
@@ -196,16 +214,18 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -264,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -393,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -403,6 +425,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -419,12 +442,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,7 +528,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -571,12 +599,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -603,6 +634,8 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -620,7 +653,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -634,9 +666,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -713,12 +746,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -746,11 +781,14 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -762,43 +800,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -807,10 +872,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -822,8 +890,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -865,6 +935,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -911,6 +982,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -978,39 +1050,29 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1072,39 +1134,14 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+# CONFIG_SND_POWERMAC is not set
+# CONFIG_SND_AOA is not set
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1136,6 +1173,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1187,6 +1225,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1195,7 +1234,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1208,7 +1246,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1262,6 +1299,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1360,6 +1398,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1372,17 +1411,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1461,6 +1499,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1486,6 +1525,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1504,19 +1545,32 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1571,6 +1625,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1603,5 +1661,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 46fffbcd3f9..1501c4336b3 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:16 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -106,10 +107,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -120,6 +127,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -138,8 +146,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -157,6 +163,7 @@ CONFIG_MPC86XADS=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 CONFIG_8xx_CPU6=y
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -175,7 +182,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -192,7 +198,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -253,10 +261,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +365,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -378,7 +383,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -414,7 +418,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
 CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
@@ -484,6 +487,7 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -524,6 +528,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -540,6 +546,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -551,8 +558,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -582,10 +591,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -599,6 +604,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -677,6 +686,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -687,13 +697,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -733,6 +742,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -758,7 +768,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -810,6 +828,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -841,6 +863,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 9df78973005..fc3f6dc5812 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:17 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -108,10 +109,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -121,6 +128,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -165,6 +171,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -183,7 +190,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -200,7 +206,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -224,6 +230,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -231,6 +238,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -263,10 +271,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -453,7 +457,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -555,10 +558,13 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -570,8 +576,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -601,10 +609,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -673,6 +677,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -683,13 +688,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -728,6 +732,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -752,6 +757,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -767,16 +774,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -788,6 +807,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 3688e4bb6fc..80481f27013 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:02:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:20:26 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,9 +94,8 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -120,10 +120,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -140,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -159,19 +166,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_IPIC is not set
@@ -221,7 +227,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -244,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -251,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
@@ -314,10 +322,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -501,7 +505,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
@@ -571,6 +574,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 # CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIUART is not set
 CONFIG_BT_HCIBCM203X=m
 # CONFIG_BT_HCIBPA10X is not set
@@ -588,27 +592,18 @@ CONFIG_BT_HCIBFUSB=m
 CONFIG_CFG80211=m
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
@@ -628,6 +623,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -656,12 +653,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -669,6 +668,8 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -685,7 +686,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -703,10 +703,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -727,8 +725,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -820,6 +816,7 @@ CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
 CONFIG_SCSI_MAC53C94=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -844,30 +841,22 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=m
 CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
 # CONFIG_IEEE1394_ETH1394 is not set
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=m
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB=y
@@ -887,7 +876,6 @@ CONFIG_THERM_ADT746X=m
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -936,7 +924,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -952,6 +939,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -994,13 +982,15 @@ CONFIG_PRISM54=m
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 CONFIG_P54_COMMON=m
 # CONFIG_P54_USB is not set
 # CONFIG_P54_PCI is not set
 # CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 CONFIG_B43=m
@@ -1095,6 +1085,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1109,12 +1100,14 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1165,45 +1158,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1212,6 +1230,8 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1221,6 +1241,7 @@ CONFIG_APM_POWER=y
 CONFIG_BATTERY_PMU=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1241,8 +1262,10 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1343,10 +1366,13 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1374,15 +1400,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1400,19 +1418,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1474,20 +1486,9 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1495,36 +1496,14 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1554,6 +1533,7 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1579,6 +1559,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1600,6 +1581,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1608,7 +1590,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1617,7 +1598,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1676,7 +1656,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1693,6 +1672,7 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1702,6 +1682,8 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1789,6 +1771,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1811,7 +1794,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1891,6 +1873,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1921,8 +1904,10 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1933,24 +1918,38 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
@@ -2009,6 +2008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 9d0140e3838..6a5b713a07e 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc9
-# Tue Apr 15 08:46:44 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 12:34:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,8 +26,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -84,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -109,14 +114,22 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -127,6 +140,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,11 +160,10 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_XILINX_VIRTEX=y
 CONFIG_EP405=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
@@ -158,7 +171,6 @@ CONFIG_WALNUT=y
 CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
 CONFIG_405GP=y
 CONFIG_405EX=y
-CONFIG_XILINX_VIRTEX=y
 CONFIG_XILINX_VIRTEX_II_PRO=y
 CONFIG_XILINX_VIRTEX_4_FX=y
 CONFIG_IBM405_ERR77=y
@@ -211,7 +223,9 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -219,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -229,6 +244,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -239,6 +255,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,17 +265,13 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -267,6 +280,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -284,7 +302,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -295,9 +313,25 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -347,6 +381,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -359,6 +395,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -429,8 +466,17 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -449,12 +495,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -472,12 +520,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -512,7 +563,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -522,12 +572,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -540,6 +590,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -547,6 +598,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -573,6 +625,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -611,13 +664,76 @@ CONFIG_XILINX_HWICAP=m
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
 
 #
-# SPI support
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
 #
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=m
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -633,13 +749,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -656,16 +783,14 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -674,14 +799,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -690,13 +812,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -715,8 +842,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -741,10 +871,27 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -755,14 +902,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,20 +921,64 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -802,6 +991,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -809,9 +999,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -824,17 +1017,30 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -846,51 +1052,85 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index f9d279bb700..c7825dcbf41 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  9 13:50:48 2008
+# Linux kernel version: 2.6.27-rc1
+# Tue Aug  5 10:01:31 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,9 +30,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -116,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -136,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -155,8 +164,6 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -231,6 +238,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -248,6 +256,7 @@ CONFIG_ISA_DMA_API=y
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -275,10 +284,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -287,6 +292,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -304,7 +314,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -315,7 +325,25 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -365,6 +393,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -447,8 +477,17 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -460,6 +499,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
@@ -467,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -480,9 +522,41 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -499,7 +573,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -534,7 +607,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -549,6 +621,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -570,11 +643,21 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -635,8 +718,77 @@ CONFIG_XILINX_HWICAP=m
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=m
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -653,6 +805,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -686,22 +839,113 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -719,8 +963,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -743,8 +992,11 @@ CONFIG_INOTIFY_USER=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=m
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -780,9 +1032,16 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+CONFIG_UBIFS_FS_XATTR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -793,13 +1052,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -813,7 +1071,46 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -822,13 +1119,16 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -849,6 +1149,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -866,19 +1168,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -934,6 +1245,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -962,8 +1277,8 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index ce250bc9858..fc5930caeb5 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Mon Jun 16 21:11:19 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:22:03 2008
 #
 CONFIG_PPC64=y
 
@@ -14,6 +14,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+CONFIG_VSX=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -105,7 +107,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -129,14 +130,20 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -172,14 +180,13 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -189,8 +196,6 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
@@ -213,11 +218,15 @@ CONFIG_PPC_CELLEB=y
 #
 CONFIG_SPU_FS=m
 CONFIG_SPU_FS_64K_LS=y
+# CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 CONFIG_CBE_RAS=y
+CONFIG_PPC_IBM_CELL_RESETBUTTON=y
+CONFIG_PPC_IBM_CELL_POWERBUTTON=m
 CONFIG_CBE_THERM=m
 CONFIG_CBE_CPUFREQ=m
 CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
 CONFIG_OPROFILE_CELL=y
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
@@ -279,7 +288,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -315,8 +324,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -327,6 +338,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
@@ -370,10 +382,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -387,6 +395,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -578,6 +587,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -603,12 +614,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -616,6 +629,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -649,10 +663,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -674,8 +686,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -737,6 +747,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVFC_TRACE=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_MVSAS is not set
@@ -758,6 +770,7 @@ CONFIG_SCSI_LPFC=m
 CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
 CONFIG_SATA_PMP=y
@@ -837,9 +850,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
@@ -847,29 +857,21 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
@@ -884,7 +886,6 @@ CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -942,6 +943,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
@@ -949,10 +951,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -968,13 +968,13 @@ CONFIG_TIGON3=y
 CONFIG_SPIDER_NET=m
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
 CONFIG_EHEA=m
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
@@ -1068,6 +1068,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1090,12 +1091,14 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1131,11 +1134,13 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_ISERIES=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
 CONFIG_HVCS=m
+CONFIG_IBM_BSR=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -1156,45 +1161,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_PASEMI=y
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PASEMI=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1203,10 +1233,13 @@ CONFIG_I2C_PASEMI=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1218,8 +1251,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1299,10 +1334,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1331,15 +1369,7 @@ CONFIG_FB_LOGO_EXTRA=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1355,19 +1385,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1429,20 +1453,9 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1450,36 +1463,14 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1508,6 +1499,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1556,6 +1548,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1564,7 +1557,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1577,7 +1569,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1769,6 +1760,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1779,12 +1771,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1793,7 +1785,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1878,6 +1869,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1910,8 +1902,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1923,28 +1917,47 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+# CONFIG_FTRACE is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_HCALL_STATS is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -2007,6 +2020,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
new file mode 100644
index 00000000000..3c6dbdef56e
--- /dev/null
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -0,0 +1,3316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:29:50 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_LSF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+# CONFIG_PPC_MPC5200_SIMPLE is not set
+CONFIG_PPC_EFIKA=y
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_PMAC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
+CONFIG_MPC8272_ADS=y
+CONFIG_PQ2FADS=y
+CONFIG_EP8248E=y
+CONFIG_PQ2ADS=y
+CONFIG_8260=y
+CONFIG_8272=y
+CONFIG_PQ2_ADS_PCI_PIC=y
+CONFIG_PPC_83xx=y
+CONFIG_MPC831x_RDB=y
+CONFIG_MPC832x_MDS=y
+CONFIG_MPC832x_RDB=y
+CONFIG_MPC834x_MDS=y
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
+CONFIG_MPC837x_MDS=y
+CONFIG_MPC837x_RDB=y
+CONFIG_SBC834x=y
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC831x=y
+CONFIG_PPC_MPC832x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_PPC_MPC837x=y
+CONFIG_PPC_86xx=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8641=y
+CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_IPIC=y
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# CPU Frequency drivers
+#
+CONFIG_CPU_FREQ_PMAC=y
+# CONFIG_PPC601_SYNC_FIX is not set
+CONFIG_TAU=y
+# CONFIG_TAU_INT is not set
+CONFIG_TAU_AVERAGE=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_CPM2=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=m
+CONFIG_PPC_BESTCOMM_FEC=m
+CONFIG_PPC_BESTCOMM_GEN_BD=m
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_APM_EMULATION=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_PAGE_OFFSET_BOOL is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_NET_DCCPPROBE=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_DECNET=m
+CONFIG_DECNET_ROUTER=y
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=m
+CONFIG_IEEE80211_DEBUG=y
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPACPI is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+CONFIG_MAC_FLOPPY=m
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_HD=y
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA_PMAC=y
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_MESH=m
+CONFIG_SCSI_MESH_SYNC_RATE=5
+CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
+CONFIG_SCSI_MAC53C94=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+# CONFIG_SCSI_DH_ALUA is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=m
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+CONFIG_ATA_PIIX=m
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+CONFIG_PDC_ADMA=m
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+CONFIG_ATA_GENERIC=m
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=m
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_OPTIDMA=m
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+CONFIG_PATA_VIA=m
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+CONFIG_PATA_SCH=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_DEBUG=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_MEDIABAY=y
+CONFIG_PMAC_BACKLIGHT=y
+# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
+CONFIG_ADB_MACIO=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_WINDTUNNEL=m
+CONFIG_THERM_ADT746X=m
+CONFIG_WINDFARM=y
+# CONFIG_ANSLCD is not set
+CONFIG_PMAC_RACKMETER=m
+CONFIG_NETDEVICES=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NET_SB1000=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACE=m
+# CONFIG_MACE_AAUI_PORT is not set
+CONFIG_BMAC=m
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+# CONFIG_WD80x3 is not set
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+CONFIG_AMD8111_ETH=m
+CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_FORCEDETH=m
+CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R6040=m
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_SC92031=m
+CONFIG_NET_POCKET=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_FEC_MPC52xx=m
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_FS_ENET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+CONFIG_E1000E=m
+CONFIG_IP1000=m
+CONFIG_IGB=m
+CONFIG_IGB_LRO=y
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+CONFIG_R8169_VLAN=y
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_GIANFAR=m
+# CONFIG_UCC_GETH is not set
+CONFIG_MV643XX_ETH=m
+CONFIG_QLA3XXX=m
+CONFIG_ATL1=m
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T3=m
+CONFIG_IXGBE=m
+CONFIG_IXGB=m
+CONFIG_S2IO=m
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NIU=m
+# CONFIG_MLX4_CORE is not set
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+CONFIG_SFC=m
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E is not set
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+CONFIG_SKFP=m
+# CONFIG_HIPPI is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_NET_FC=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+CONFIG_NOZOMI=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_PMACZILOG_TTYS is not set
+# CONFIG_SERIAL_CPM is not set
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_QE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BRIQ_PANEL=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+# CONFIG_HVC_RTAS is not set
+# CONFIG_VIRTIO_CONSOLE is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
+CONFIG_R3964=m
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_HYDRA=m
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=m
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+CONFIG_I2C_VOODOO3=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_PCF8575=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_APM_POWER=m
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_PMU=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7473=m
+CONFIG_SENSORS_AMS=m
+CONFIG_SENSORS_AMS_PMU=y
+CONFIG_SENSORS_AMS_I2C=y
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_MPC5200_WDT is not set
+# CONFIG_8xxx_WDT is not set
+CONFIG_WATCHDOG_RTAS=m
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+CONFIG_MFD_SM501=m
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_SAA6588=m
+# CONFIG_VIDEO_PMS is not set
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+# CONFIG_USB_S2255 is not set
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+# CONFIG_MT9M001_PCA9536_SWITCH is not set
+CONFIG_SOC_CAMERA_MT9V022=m
+# CONFIG_MT9V022_PCA9536_SWITCH is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+CONFIG_DVB_CINERGYT2_TUNING=y
+CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
+CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
+CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
+CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
+CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=y
+CONFIG_AGP_UNINORTH=y
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_VGASTATE=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SVGALIB=m
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+CONFIG_FB_PLATINUM=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_CT65550=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_MATROX_MULTIHEAD=y
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=y
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+# CONFIG_FB_SIS is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+CONFIG_FB_3DFX_ACCEL=y
+CONFIG_FB_VOODOO1=m
+# CONFIG_FB_VT8623 is not set
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_TRIDENT_ACCEL=y
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_FSL_DIU is not set
+CONFIG_FB_SM501=m
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_SC6000 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_FM801_TEA575X=m
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_HIFIER=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+CONFIG_SND_KORG1212=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_SIERRA is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_AUXDISPLAY=y
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_SMX=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4DEV_FS=m
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_JBD2_DEBUG=y
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
+# CONFIG_HPFS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+CONFIG_QE_GPIO=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_HIGHMEM=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_FRAME_POINTER=y
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+CONFIG_FTRACE=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_CRYPTO_DEV_TALITOS=m
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index bc3bf62ddc2..b390b747664 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:13 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -82,7 +87,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -90,6 +94,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -107,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -120,6 +131,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -138,33 +150,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 # CONFIG_MPC8272_ADS is not set
 CONFIG_PQ2FADS=y
 # CONFIG_EP8248E is not set
 CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -181,7 +203,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -243,10 +269,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -447,9 +469,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -461,14 +485,15 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -486,7 +511,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -498,9 +522,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -517,9 +539,8 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDE_PMAC is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -537,13 +558,12 @@ CONFIG_IDE_PROC_FS=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -567,8 +587,11 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -590,7 +613,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -602,6 +624,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -667,6 +690,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -677,7 +701,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -692,6 +718,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -712,6 +739,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -724,6 +752,8 @@ CONFIG_SERIAL_CPM_SCC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -734,10 +764,28 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -749,8 +797,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -782,10 +832,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -795,6 +841,8 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -807,7 +855,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_PXA27X is not set
@@ -826,6 +874,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -893,6 +942,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -902,8 +952,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -983,6 +1033,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1009,6 +1060,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1026,19 +1079,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1046,6 +1111,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1086,6 +1152,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1117,6 +1187,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index c6b83577c05..01b54eac1ff 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -94,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -118,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -132,6 +138,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -151,25 +158,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 CONFIG_PPC_PRPMC2800=y
+# CONFIG_PPC_C2K is not set
 CONFIG_MV64X60=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -198,7 +205,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -228,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -264,10 +273,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,7 +364,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -461,12 +468,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -487,7 +496,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -505,10 +513,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -526,8 +532,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -603,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -669,6 +674,10 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -676,7 +685,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -741,10 +749,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -760,6 +766,7 @@ CONFIG_E1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -840,6 +847,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -875,43 +883,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -920,10 +949,13 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -977,6 +1009,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -988,8 +1021,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1028,10 +1063,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1060,6 +1091,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1102,7 +1134,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1115,7 +1146,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1169,6 +1199,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1258,6 +1289,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1267,12 +1299,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1312,6 +1343,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1337,7 +1369,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1390,6 +1431,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 71d79e428d2..b6eee7c93cd 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon Apr 28 12:39:10 2008
+# Linux kernel version: 2.6.27-rc3
+# Wed Aug 20 08:16:53 2008
 #
 CONFIG_PPC64=y
 
@@ -14,8 +14,9 @@ CONFIG_POWER4=y
 CONFIG_TUNE_CELL=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -115,14 +117,22 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -132,6 +142,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -152,13 +163,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -177,6 +183,7 @@ CONFIG_PS3_STORAGE=y
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=y
 CONFIG_PS3_FLASH=y
+CONFIG_OPROFILE_PS3=y
 CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -187,6 +194,7 @@ CONFIG_PPC_CELL=y
 # Cell Broadband Engine options
 #
 CONFIG_SPU_FS=y
+CONFIG_SPU_FS_64K_LS=y
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
 # CONFIG_IPIC is not set
@@ -215,13 +223,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -248,18 +257,24 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTREMOVE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
-# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
@@ -268,18 +283,17 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -390,9 +404,22 @@ CONFIG_BT_HCIUSB_SCO=y
 #
 # Wireless
 #
-# CONFIG_CFG80211 is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS_EXT_SYSFS is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
@@ -411,12 +438,79 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PS3VRAM=y
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -432,6 +526,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65535
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -478,11 +573,11 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -498,9 +593,9 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
+CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -511,8 +606,22 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+# CONFIG_RT2500USB is not set
+CONFIG_RT73USB=m
+# CONFIG_RT2X00_DEBUG is not set
 
 #
 # USB Network Adapters
@@ -533,8 +642,18 @@ CONFIG_USB_NET_MCS7830=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_WAN is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -600,9 +719,11 @@ CONFIG_INPUT_JOYSTICK=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -618,23 +739,19 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -646,14 +763,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -671,8 +799,8 @@ CONFIG_FB=y
 CONFIG_FB_SYS_FILLRECT=y
 CONFIG_FB_SYS_COPYAREA=y
 CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -712,18 +840,12 @@ CONFIG_FB_LOGO_EXTRA=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -732,53 +854,20 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerMac requires I2C
-#
-
-#
-# ALSA PowerPC devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PPC=y
 CONFIG_SND_PS3=m
 CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
@@ -807,17 +896,21 @@ CONFIG_USB=m
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -827,10 +920,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_R8A66597_HCD is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -852,6 +950,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -860,7 +959,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -873,7 +971,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -890,12 +987,45 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -911,6 +1041,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -959,8 +1090,8 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -973,9 +1104,11 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -986,14 +1119,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1059,12 +1191,15 @@ CONFIG_NLS_ISO8859_1=y
 #
 CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
@@ -1082,41 +1217,63 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1172,6 +1329,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index fe6ffa683d7..e77c5e7a0be 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:03:28 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:31:07 2008
 #
 CONFIG_PPC64=y
 
@@ -14,6 +14,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+CONFIG_VSX=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -104,7 +106,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -132,11 +133,17 @@ CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -172,17 +180,14 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -226,7 +231,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -275,6 +280,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -304,10 +310,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -321,6 +323,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -498,6 +501,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -531,12 +536,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -544,6 +551,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -575,10 +583,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -596,8 +602,6 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -659,6 +663,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVFC_TRACE=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
@@ -681,6 +687,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -703,9 +710,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
@@ -713,12 +717,15 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -726,7 +733,23 @@ CONFIG_BONDING=m
 CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -759,6 +782,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
@@ -767,10 +791,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -785,14 +807,14 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_EHEA=y
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -883,6 +905,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -906,12 +929,14 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -943,6 +968,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
@@ -961,44 +987,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1007,10 +1054,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1022,8 +1072,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1102,10 +1154,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1133,10 +1188,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1165,6 +1216,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1190,6 +1242,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1211,6 +1264,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1219,7 +1273,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1233,7 +1286,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1250,6 +1302,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1316,6 +1369,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1371,6 +1425,7 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1394,7 +1449,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1463,6 +1517,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1495,8 +1550,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1508,30 +1565,49 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+# CONFIG_FTRACE is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HCALL_STATS=y
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 CONFIG_VIRQ_DEBUG=y
 # CONFIG_BOOTX_TEXT is not set
@@ -1590,6 +1666,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
index 8227510b41a..f545421f985 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:19 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
@@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -117,10 +118,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,30 +164,40 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 CONFIG_SBC8641D=y
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +213,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -203,9 +221,11 @@ CONFIG_PREEMPT=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -265,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -282,6 +302,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -406,6 +427,7 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -429,6 +451,7 @@ CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -451,8 +474,10 @@ CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -472,7 +497,6 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -625,6 +649,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -640,12 +665,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -680,12 +707,15 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -712,6 +742,8 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -729,7 +761,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -743,9 +774,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -768,7 +800,7 @@ CONFIG_ATM_DRIVERS=y
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -834,6 +866,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -857,11 +890,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -874,42 +910,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -918,10 +981,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -931,6 +997,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -975,6 +1042,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -982,6 +1050,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -998,8 +1069,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1038,10 +1111,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1056,6 +1125,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
@@ -1096,6 +1169,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1145,6 +1219,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
@@ -1155,14 +1230,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1183,6 +1257,7 @@ CONFIG_CIFS_POSIX=y
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
@@ -1233,6 +1308,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1259,6 +1335,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1275,21 +1353,34 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1299,7 +1390,6 @@ CONFIG_DEBUGGER=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
@@ -1349,6 +1439,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1382,5 +1476,6 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 88f6aa8273b..4340cc1c5b6 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:20 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -87,7 +88,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,10 +110,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,6 +136,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,25 +156,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 CONFIG_STORCENTER=y
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
@@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -229,6 +237,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -264,10 +273,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -456,20 +461,22 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
@@ -483,7 +490,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -500,10 +506,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -521,8 +525,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -599,6 +601,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -616,12 +619,15 @@ CONFIG_MD_RAID5_RESHAPE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,14 +641,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -653,6 +657,7 @@ CONFIG_R8169=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -734,43 +739,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -779,10 +805,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -794,8 +823,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -827,10 +858,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -849,6 +876,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -896,6 +924,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -904,7 +933,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -917,7 +945,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -971,6 +998,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1074,6 +1102,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1151,6 +1180,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1178,7 +1208,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/include/asm/8253pit.h b/arch/powerpc/include/asm/8253pit.h
new file mode 100644
index 00000000000..b70d6e53b30
--- /dev/null
+++ b/arch/powerpc/include/asm/8253pit.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_POWERPC_8253PIT_H
+#define _ASM_POWERPC_8253PIT_H
+
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#define PIT_TICK_RATE	1193182UL
+
+#endif	/* _ASM_POWERPC_8253PIT_H */
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
new file mode 100644
index 00000000000..4b0e1520600
--- /dev/null
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -0,0 +1,564 @@
+/*
+ * MPC8xx Internal Memory Map
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * The I/O on the MPC860 is comprised of blocks of special registers
+ * and the dual port ram for the Communication Processor Module.
+ * Within this space are functional units such as the SIU, memory
+ * controller, system timers, and other control functions.  It is
+ * a combination that I found difficult to separate into logical
+ * functional files.....but anyone else is welcome to try.  -- Dan
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_8XX__
+#define __IMMAP_8XX__
+
+/* System configuration registers.
+*/
+typedef	struct sys_conf {
+	uint	sc_siumcr;
+	uint	sc_sypcr;
+	uint	sc_swt;
+	char	res1[2];
+	ushort	sc_swsr;
+	uint	sc_sipend;
+	uint	sc_simask;
+	uint	sc_siel;
+	uint	sc_sivec;
+	uint	sc_tesr;
+	char	res2[0xc];
+	uint	sc_sdcr;
+	char	res3[0x4c];
+} sysconf8xx_t;
+
+/* PCMCIA configuration registers.
+*/
+typedef struct pcmcia_conf {
+	uint	pcmc_pbr0;
+	uint	pcmc_por0;
+	uint	pcmc_pbr1;
+	uint	pcmc_por1;
+	uint	pcmc_pbr2;
+	uint	pcmc_por2;
+	uint	pcmc_pbr3;
+	uint	pcmc_por3;
+	uint	pcmc_pbr4;
+	uint	pcmc_por4;
+	uint	pcmc_pbr5;
+	uint	pcmc_por5;
+	uint	pcmc_pbr6;
+	uint	pcmc_por6;
+	uint	pcmc_pbr7;
+	uint	pcmc_por7;
+	char	res1[0x20];
+	uint	pcmc_pgcra;
+	uint	pcmc_pgcrb;
+	uint	pcmc_pscr;
+	char	res2[4];
+	uint	pcmc_pipr;
+	char	res3[4];
+	uint	pcmc_per;
+	char	res4[4];
+} pcmconf8xx_t;
+
+/* Memory controller registers.
+*/
+typedef struct	mem_ctlr {
+	uint	memc_br0;
+	uint	memc_or0;
+	uint	memc_br1;
+	uint	memc_or1;
+	uint	memc_br2;
+	uint	memc_or2;
+	uint	memc_br3;
+	uint	memc_or3;
+	uint	memc_br4;
+	uint	memc_or4;
+	uint	memc_br5;
+	uint	memc_or5;
+	uint	memc_br6;
+	uint	memc_or6;
+	uint	memc_br7;
+	uint	memc_or7;
+	char	res1[0x24];
+	uint	memc_mar;
+	uint	memc_mcr;
+	char	res2[4];
+	uint	memc_mamr;
+	uint	memc_mbmr;
+	ushort	memc_mstat;
+	ushort	memc_mptpr;
+	uint	memc_mdr;
+	char	res3[0x80];
+} memctl8xx_t;
+
+/*-----------------------------------------------------------------------
+ * BR - Memory Controler: Base Register					16-9
+ */
+#define BR_BA_MSK	0xffff8000	/* Base Address Mask			*/
+#define BR_AT_MSK	0x00007000	/* Address Type Mask			*/
+#define BR_PS_MSK	0x00000c00	/* Port Size Mask			*/
+#define BR_PS_32	0x00000000	/* 32 bit port size			*/
+#define BR_PS_16	0x00000800	/* 16 bit port size			*/
+#define BR_PS_8		0x00000400	/*  8 bit port size			*/
+#define BR_PARE		0x00000200	/* Parity Enable			*/
+#define BR_WP		0x00000100	/* Write Protect			*/
+#define BR_MS_MSK	0x000000c0	/* Machine Select Mask			*/
+#define BR_MS_GPCM	0x00000000	/* G.P.C.M. Machine Select		*/
+#define BR_MS_UPMA	0x00000080	/* U.P.M.A Machine Select		*/
+#define BR_MS_UPMB	0x000000c0	/* U.P.M.B Machine Select		*/
+#define BR_V		0x00000001	/* Bank Valid				*/
+
+/*-----------------------------------------------------------------------
+ * OR - Memory Controler: Option Register				16-11
+ */
+#define OR_AM_MSK	0xffff8000	/* Address Mask Mask			*/
+#define OR_ATM_MSK	0x00007000	/* Address Type Mask Mask		*/
+#define OR_CSNT_SAM	0x00000800	/* Chip Select Negation Time/ Start	*/
+					/* Address Multiplex			*/
+#define OR_ACS_MSK	0x00000600	/* Address to Chip Select Setup mask	*/
+#define OR_ACS_DIV1	0x00000000	/* CS is output at the same time	*/
+#define OR_ACS_DIV4	0x00000400	/* CS is output 1/4 a clock later	*/
+#define OR_ACS_DIV2	0x00000600	/* CS is output 1/2 a clock later	*/
+#define OR_G5LA		0x00000400	/* Output #GPL5 on #GPL_A5		*/
+#define OR_G5LS		0x00000200	/* Drive #GPL high on falling edge of...*/
+#define OR_BI		0x00000100	/* Burst inhibit			*/
+#define OR_SCY_MSK	0x000000f0	/* Cycle Length in Clocks		*/
+#define OR_SCY_0_CLK	0x00000000	/* 0 clock cycles wait states		*/
+#define OR_SCY_1_CLK	0x00000010	/* 1 clock cycles wait states		*/
+#define OR_SCY_2_CLK	0x00000020	/* 2 clock cycles wait states		*/
+#define OR_SCY_3_CLK	0x00000030	/* 3 clock cycles wait states		*/
+#define OR_SCY_4_CLK	0x00000040	/* 4 clock cycles wait states		*/
+#define OR_SCY_5_CLK	0x00000050	/* 5 clock cycles wait states		*/
+#define OR_SCY_6_CLK	0x00000060	/* 6 clock cycles wait states		*/
+#define OR_SCY_7_CLK	0x00000070	/* 7 clock cycles wait states		*/
+#define OR_SCY_8_CLK	0x00000080	/* 8 clock cycles wait states		*/
+#define OR_SCY_9_CLK	0x00000090	/* 9 clock cycles wait states		*/
+#define OR_SCY_10_CLK	0x000000a0	/* 10 clock cycles wait states		*/
+#define OR_SCY_11_CLK	0x000000b0	/* 11 clock cycles wait states		*/
+#define OR_SCY_12_CLK	0x000000c0	/* 12 clock cycles wait states		*/
+#define OR_SCY_13_CLK	0x000000d0	/* 13 clock cycles wait states		*/
+#define OR_SCY_14_CLK	0x000000e0	/* 14 clock cycles wait states		*/
+#define OR_SCY_15_CLK	0x000000f0	/* 15 clock cycles wait states		*/
+#define OR_SETA		0x00000008	/* External Transfer Acknowledge	*/
+#define OR_TRLX		0x00000004	/* Timing Relaxed			*/
+#define OR_EHTR		0x00000002	/* Extended Hold Time on Read		*/
+
+/* System Integration Timers.
+*/
+typedef struct	sys_int_timers {
+	ushort	sit_tbscr;
+	char	res0[0x02];
+	uint	sit_tbreff0;
+	uint	sit_tbreff1;
+	char	res1[0x14];
+	ushort	sit_rtcsc;
+	char	res2[0x02];
+	uint	sit_rtc;
+	uint	sit_rtsec;
+	uint	sit_rtcal;
+	char	res3[0x10];
+	ushort	sit_piscr;
+	char	res4[2];
+	uint	sit_pitc;
+	uint	sit_pitr;
+	char	res5[0x34];
+} sit8xx_t;
+
+#define TBSCR_TBIRQ_MASK	((ushort)0xff00)
+#define TBSCR_REFA		((ushort)0x0080)
+#define TBSCR_REFB		((ushort)0x0040)
+#define TBSCR_REFAE		((ushort)0x0008)
+#define TBSCR_REFBE		((ushort)0x0004)
+#define TBSCR_TBF		((ushort)0x0002)
+#define TBSCR_TBE		((ushort)0x0001)
+
+#define RTCSC_RTCIRQ_MASK	((ushort)0xff00)
+#define RTCSC_SEC		((ushort)0x0080)
+#define RTCSC_ALR		((ushort)0x0040)
+#define RTCSC_38K		((ushort)0x0010)
+#define RTCSC_SIE		((ushort)0x0008)
+#define RTCSC_ALE		((ushort)0x0004)
+#define RTCSC_RTF		((ushort)0x0002)
+#define RTCSC_RTE		((ushort)0x0001)
+
+#define PISCR_PIRQ_MASK		((ushort)0xff00)
+#define PISCR_PS		((ushort)0x0080)
+#define PISCR_PIE		((ushort)0x0004)
+#define PISCR_PTF		((ushort)0x0002)
+#define PISCR_PTE		((ushort)0x0001)
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+	uint	car_sccr;
+	uint	car_plprcr;
+	uint	car_rsr;
+	char	res[0x74];        /* Reserved area                  */
+} car8xx_t;
+
+/* System Integration Timers keys.
+*/
+typedef struct sitk {
+	uint	sitk_tbscrk;
+	uint	sitk_tbreff0k;
+	uint	sitk_tbreff1k;
+	uint	sitk_tbk;
+	char	res1[0x10];
+	uint	sitk_rtcsck;
+	uint	sitk_rtck;
+	uint	sitk_rtseck;
+	uint	sitk_rtcalk;
+	char	res2[0x10];
+	uint	sitk_piscrk;
+	uint	sitk_pitck;
+	char	res3[0x38];
+} sitk8xx_t;
+
+/* Clocks and reset keys.
+*/
+typedef struct cark {
+	uint	cark_sccrk;
+	uint	cark_plprcrk;
+	uint	cark_rsrk;
+	char	res[0x474];
+} cark8xx_t;
+
+/* The key to unlock registers maintained by keep-alive power.
+*/
+#define KAPWR_KEY	((unsigned int)0x55ccaa33)
+
+/* Video interface.  MPC823 Only.
+*/
+typedef struct vid823 {
+	ushort	vid_vccr;
+	ushort	res1;
+	u_char	vid_vsr;
+	u_char	res2;
+	u_char	vid_vcmr;
+	u_char	res3;
+	uint	vid_vbcb;
+	uint	res4;
+	uint	vid_vfcr0;
+	uint	vid_vfaa0;
+	uint	vid_vfba0;
+	uint	vid_vfcr1;
+	uint	vid_vfaa1;
+	uint	vid_vfba1;
+	u_char	res5[0x18];
+} vid823_t;
+
+/* LCD interface.  823 Only.
+*/
+typedef struct lcd {
+	uint	lcd_lccr;
+	uint	lcd_lchcr;
+	uint	lcd_lcvcr;
+	char	res1[4];
+	uint	lcd_lcfaa;
+	uint	lcd_lcfba;
+	char	lcd_lcsr;
+	char	res2[0x7];
+} lcd823_t;
+
+/* I2C
+*/
+typedef struct i2c {
+	u_char	i2c_i2mod;
+	char	res1[3];
+	u_char	i2c_i2add;
+	char	res2[3];
+	u_char	i2c_i2brg;
+	char	res3[3];
+	u_char	i2c_i2com;
+	char	res4[3];
+	u_char	i2c_i2cer;
+	char	res5[3];
+	u_char	i2c_i2cmr;
+	char	res6[0x8b];
+} i2c8xx_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+	char	res1[4];
+	uint	sdma_sdar;
+	u_char	sdma_sdsr;
+	char	res3[3];
+	u_char	sdma_sdmr;
+	char	res4[3];
+	u_char	sdma_idsr1;
+	char	res5[3];
+	u_char	sdma_idmr1;
+	char	res6[3];
+	u_char	sdma_idsr2;
+	char	res7[3];
+	u_char	sdma_idmr2;
+	char	res8[0x13];
+} sdma8xx_t;
+
+/* Communication Processor Module Interrupt Controller.
+*/
+typedef struct cpm_ic {
+	ushort	cpic_civr;
+	char	res[0xe];
+	uint	cpic_cicr;
+	uint	cpic_cipr;
+	uint	cpic_cimr;
+	uint	cpic_cisr;
+} cpic8xx_t;
+
+/* Input/Output Port control/status registers.
+*/
+typedef struct io_port {
+	ushort	iop_padir;
+	ushort	iop_papar;
+	ushort	iop_paodr;
+	ushort	iop_padat;
+	char	res1[8];
+	ushort	iop_pcdir;
+	ushort	iop_pcpar;
+	ushort	iop_pcso;
+	ushort	iop_pcdat;
+	ushort	iop_pcint;
+	char	res2[6];
+	ushort	iop_pddir;
+	ushort	iop_pdpar;
+	char	res3[2];
+	ushort	iop_pddat;
+	uint	utmode;
+	char	res4[4];
+} iop8xx_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+	ushort	cpmt_tgcr;
+	char	res1[0xe];
+	ushort	cpmt_tmr1;
+	ushort	cpmt_tmr2;
+	ushort	cpmt_trr1;
+	ushort	cpmt_trr2;
+	ushort	cpmt_tcr1;
+	ushort	cpmt_tcr2;
+	ushort	cpmt_tcn1;
+	ushort	cpmt_tcn2;
+	ushort	cpmt_tmr3;
+	ushort	cpmt_tmr4;
+	ushort	cpmt_trr3;
+	ushort	cpmt_trr4;
+	ushort	cpmt_tcr3;
+	ushort	cpmt_tcr4;
+	ushort	cpmt_tcn3;
+	ushort	cpmt_tcn4;
+	ushort	cpmt_ter1;
+	ushort	cpmt_ter2;
+	ushort	cpmt_ter3;
+	ushort	cpmt_ter4;
+	char	res2[8];
+} cpmtimer8xx_t;
+
+/* Finally, the Communication Processor stuff.....
+*/
+typedef struct scc {		/* Serial communication channels */
+	uint	scc_gsmrl;
+	uint	scc_gsmrh;
+	ushort	scc_psmr;
+	char	res1[2];
+	ushort	scc_todr;
+	ushort	scc_dsr;
+	ushort	scc_scce;
+	char	res2[2];
+	ushort	scc_sccm;
+	char	res3;
+	u_char	scc_sccs;
+	char	res4[8];
+} scc_t;
+
+typedef struct smc {		/* Serial management channels */
+	char	res1[2];
+	ushort	smc_smcmr;
+	char	res2[2];
+	u_char	smc_smce;
+	char	res3[3];
+	u_char	smc_smcm;
+	char	res4[5];
+} smc_t;
+
+/* MPC860T Fast Ethernet Controller.  It isn't part of the CPM, but
+ * it fits within the address space.
+ */
+
+typedef struct fec {
+	uint	fec_addr_low;		/* lower 32 bits of station address	*/
+	ushort	fec_addr_high;		/* upper 16 bits of station address	*/
+	ushort	res1;			/* reserved				*/
+	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
+	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
+	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
+	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
+	uint	fec_r_buff_size;	/* Rx buffer size			*/
+	uint	res2[9];		/* reserved				*/
+	uint	fec_ecntrl;		/* ethernet control register		*/
+	uint	fec_ievent;		/* interrupt event register		*/
+	uint	fec_imask;		/* interrupt mask register		*/
+	uint	fec_ivec;		/* interrupt level and vector status	*/
+	uint	fec_r_des_active;	/* Rx ring updated flag			*/
+	uint	fec_x_des_active;	/* Tx ring updated flag			*/
+	uint	res3[10];		/* reserved				*/
+	uint	fec_mii_data;		/* MII data register			*/
+	uint	fec_mii_speed;		/* MII speed control register		*/
+	uint	res4[17];		/* reserved				*/
+	uint	fec_r_bound;		/* end of RAM (read-only)		*/
+	uint	fec_r_fstart;		/* Rx FIFO start address		*/
+	uint	res5[6];		/* reserved				*/
+	uint	fec_x_fstart;		/* Tx FIFO start address		*/
+	uint	res6[17];		/* reserved				*/
+	uint	fec_fun_code;		/* fec SDMA function code		*/
+	uint	res7[3];		/* reserved				*/
+	uint	fec_r_cntrl;		/* Rx control register			*/
+	uint	fec_r_hash;		/* Rx hash register			*/
+	uint	res8[14];		/* reserved				*/
+	uint	fec_x_cntrl;		/* Tx control register			*/
+	uint	res9[0x1e];		/* reserved				*/
+} fec_t;
+
+/* The FEC and LCD color map share the same address space....
+ * I guess we will never see an 823T :-).
+ */
+union fec_lcd {
+	fec_t	fl_un_fec;
+	u_char	fl_un_cmap[0x200];
+};
+
+typedef struct comm_proc {
+	/* General control and status registers.
+	*/
+	ushort	cp_cpcr;
+	u_char	res1[2];
+	ushort	cp_rccr;
+	u_char	res2;
+	u_char	cp_rmds;
+	u_char	res3[4];
+	ushort	cp_cpmcr1;
+	ushort	cp_cpmcr2;
+	ushort	cp_cpmcr3;
+	ushort	cp_cpmcr4;
+	u_char	res4[2];
+	ushort	cp_rter;
+	u_char	res5[2];
+	ushort	cp_rtmr;
+	u_char	res6[0x14];
+
+	/* Baud rate generators.
+	*/
+	uint	cp_brgc1;
+	uint	cp_brgc2;
+	uint	cp_brgc3;
+	uint	cp_brgc4;
+
+	/* Serial Communication Channels.
+	*/
+	scc_t	cp_scc[4];
+
+	/* Serial Management Channels.
+	*/
+	smc_t	cp_smc[2];
+
+	/* Serial Peripheral Interface.
+	*/
+	ushort	cp_spmode;
+	u_char	res7[4];
+	u_char	cp_spie;
+	u_char	res8[3];
+	u_char	cp_spim;
+	u_char	res9[2];
+	u_char	cp_spcom;
+	u_char	res10[2];
+
+	/* Parallel Interface Port.
+	*/
+	u_char	res11[2];
+	ushort	cp_pipc;
+	u_char	res12[2];
+	ushort	cp_ptpr;
+	uint	cp_pbdir;
+	uint	cp_pbpar;
+	u_char	res13[2];
+	ushort	cp_pbodr;
+	uint	cp_pbdat;
+
+	/* Port E - MPC87x/88x only.
+	 */
+	uint	cp_pedir;
+	uint	cp_pepar;
+	uint	cp_peso;
+	uint	cp_peodr;
+	uint	cp_pedat;
+
+	/* Communications Processor Timing Register -
+	   Contains RMII Timing for the FECs on MPC87x/88x only.
+	*/
+	uint	cp_cptr;
+
+	/* Serial Interface and Time Slot Assignment.
+	*/
+	uint	cp_simode;
+	u_char	cp_sigmr;
+	u_char	res15;
+	u_char	cp_sistr;
+	u_char	cp_sicmr;
+	u_char	res16[4];
+	uint	cp_sicr;
+	uint	cp_sirp;
+	u_char	res17[0xc];
+
+	/* 256 bytes of MPC823 video controller RAM array.
+	*/
+	u_char	cp_vcram[0x100];
+	u_char	cp_siram[0x200];
+
+	/* The fast ethernet controller is not really part of the CPM,
+	 * but it resides in the address space.
+	 * The LCD color map is also here.
+	 */
+	union	fec_lcd	fl_un;
+#define cp_fec		fl_un.fl_un_fec
+#define lcd_cmap	fl_un.fl_un_cmap
+	char	res18[0xE00];
+
+	/* The DUET family has a second FEC here */
+	fec_t	cp_fec2;
+#define cp_fec1	cp_fec	/* consistency macro */
+
+	/* Dual Ported RAM follows.
+	 * There are many different formats for this memory area
+	 * depending upon the devices used and options chosen.
+	 * Some processors don't have all of it populated.
+	 */
+	u_char	cp_dpmem[0x1C00];	/* BD / Data / ucode */
+	u_char	cp_dparam[0x400];	/* Parameter RAM */
+} cpm8xx_t;
+
+/* Internal memory map.
+*/
+typedef struct immap {
+	sysconf8xx_t	im_siu_conf;	/* SIU Configuration */
+	pcmconf8xx_t	im_pcmcia;	/* PCMCIA Configuration */
+	memctl8xx_t	im_memctl;	/* Memory Controller */
+	sit8xx_t	im_sit;		/* System integration timers */
+	car8xx_t	im_clkrst;	/* Clocks and reset */
+	sitk8xx_t	im_sitk;	/* Sys int timer keys */
+	cark8xx_t	im_clkrstk;	/* Clocks and reset keys */
+	vid823_t	im_vid;		/* Video (823 only) */
+	lcd823_t	im_lcd;		/* LCD (823 only) */
+	i2c8xx_t	im_i2c;		/* I2C control/status */
+	sdma8xx_t	im_sdma;	/* SDMA control/status */
+	cpic8xx_t	im_cpic;	/* CPM Interrupt Controller */
+	iop8xx_t	im_ioport;	/* IO Port control/status */
+	cpmtimer8xx_t	im_cpmtimer;	/* CPM timers */
+	cpm8xx_t	im_cpm;		/* Communication processor */
+} immap_t;
+
+#endif /* __IMMAP_8XX__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
new file mode 100644
index 00000000000..5ab7d7fe198
--- /dev/null
+++ b/arch/powerpc/include/asm/Kbuild
@@ -0,0 +1,37 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += auxvec.h
+header-y += ioctls.h
+header-y += sembuf.h
+header-y += siginfo.h
+header-y += stat.h
+header-y += errno.h
+header-y += ipcbuf.h
+header-y += msgbuf.h
+header-y += shmbuf.h
+header-y += socket.h
+header-y += termbits.h
+header-y += fcntl.h
+header-y += poll.h
+header-y += sockios.h
+header-y += ucontext.h
+header-y += ioctl.h
+header-y += linkage.h
+header-y += resource.h
+header-y += sigcontext.h
+header-y += statfs.h
+header-y += ps3fb.h
+
+unifdef-y += bootx.h
+unifdef-y += byteorder.h
+unifdef-y += cputable.h
+unifdef-y += elf.h
+unifdef-y += nvram.h
+unifdef-y += param.h
+unifdef-y += posix_types.h
+unifdef-y += seccomp.h
+unifdef-y += signal.h
+unifdef-y += spu_info.h
+unifdef-y += termios.h
+unifdef-y += types.h
+unifdef-y += unistd.h
diff --git a/arch/powerpc/include/asm/a.out.h b/arch/powerpc/include/asm/a.out.h
new file mode 100644
index 00000000000..89cead6b176
--- /dev/null
+++ b/arch/powerpc/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_A_OUT_H
+#define _ASM_POWERPC_A_OUT_H
+
+struct exec
+{
+	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file, in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* _ASM_POWERPC_A_OUT_H */
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
new file mode 100644
index 00000000000..98324c5a828
--- /dev/null
+++ b/arch/powerpc/include/asm/abs_addr.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_ABS_ADDR_H
+#define _ASM_POWERPC_ABS_ADDR_H
+#ifdef __KERNEL__
+
+
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/lmb.h>
+
+#include <asm/types.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/firmware.h>
+
+struct mschunks_map {
+        unsigned long num_chunks;
+        unsigned long chunk_size;
+        unsigned long chunk_shift;
+        unsigned long chunk_mask;
+        u32 *mapping;
+};
+
+extern struct mschunks_map mschunks_map;
+
+/* Chunks are 256 KB */
+#define MSCHUNKS_CHUNK_SHIFT	(18)
+#define MSCHUNKS_CHUNK_SIZE	(1UL << MSCHUNKS_CHUNK_SHIFT)
+#define MSCHUNKS_OFFSET_MASK	(MSCHUNKS_CHUNK_SIZE - 1)
+
+static inline unsigned long chunk_to_addr(unsigned long chunk)
+{
+	return chunk << MSCHUNKS_CHUNK_SHIFT;
+}
+
+static inline unsigned long addr_to_chunk(unsigned long addr)
+{
+	return addr >> MSCHUNKS_CHUNK_SHIFT;
+}
+
+static inline unsigned long phys_to_abs(unsigned long pa)
+{
+	unsigned long chunk;
+
+	/* This is a no-op on non-iSeries */
+	if (!firmware_has_feature(FW_FEATURE_ISERIES))
+		return pa;
+
+	chunk = addr_to_chunk(pa);
+
+	if (chunk < mschunks_map.num_chunks)
+		chunk = mschunks_map.mapping[chunk];
+
+	return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK);
+}
+
+/* Convenience macros */
+#define virt_to_abs(va) phys_to_abs(__pa(va))
+#define abs_to_virt(aa) __va(aa)
+
+/*
+ * Converts Virtual Address to Real Address for
+ * Legacy iSeries Hypervisor calls
+ */
+#define iseries_hv_addr(virtaddr)	\
+	(0x8000000000000000 | virt_to_abs(virtaddr))
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_ABS_ADDR_H */
diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h
new file mode 100644
index 00000000000..86455c4c31e
--- /dev/null
+++ b/arch/powerpc/include/asm/agp.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_POWERPC_AGP_H
+#define _ASM_POWERPC_AGP_H
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_AGP_H */
diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
new file mode 100644
index 00000000000..8f0fe797194
--- /dev/null
+++ b/arch/powerpc/include/asm/asm-compat.h
@@ -0,0 +1,69 @@
+#ifndef _ASM_POWERPC_ASM_COMPAT_H
+#define _ASM_POWERPC_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+#  define stringify_in_c(...)	__VA_ARGS__
+#  define ASM_CONST(x)		x
+#else
+/* This version of stringify will deal with commas... */
+#  define __stringify_in_c(...)	#__VA_ARGS__
+#  define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
+#  define __ASM_CONST(x)	x##UL
+#  define ASM_CONST(x)		__ASM_CONST(x)
+#endif
+
+
+#ifdef __powerpc64__
+
+/* operations for longs and pointers */
+#define PPC_LL		stringify_in_c(ld)
+#define PPC_STL		stringify_in_c(std)
+#define PPC_LCMPI	stringify_in_c(cmpdi)
+#define PPC_LONG	stringify_in_c(.llong)
+#define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
+#define PPC_TLNEI	stringify_in_c(tdnei)
+#define PPC_LLARX	stringify_in_c(ldarx)
+#define PPC_STLCX	stringify_in_c(stdcx.)
+#define PPC_CNTLZL	stringify_in_c(cntlzd)
+
+/* Move to CR, single-entry optimized version. Only available
+ * on POWER4 and later.
+ */
+#ifdef CONFIG_POWER4_ONLY
+#define PPC_MTOCRF	stringify_in_c(mtocrf)
+#else
+#define PPC_MTOCRF	stringify_in_c(mtcrf)
+#endif
+
+#else /* 32-bit */
+
+/* operations for longs and pointers */
+#define PPC_LL		stringify_in_c(lwz)
+#define PPC_STL		stringify_in_c(stw)
+#define PPC_LCMPI	stringify_in_c(cmpwi)
+#define PPC_LONG	stringify_in_c(.long)
+#define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
+#define PPC_TLNEI	stringify_in_c(twnei)
+#define PPC_LLARX	stringify_in_c(lwarx)
+#define PPC_STLCX	stringify_in_c(stwcx.)
+#define PPC_CNTLZL	stringify_in_c(cntlzw)
+#define PPC_MTOCRF	stringify_in_c(mtcrf)
+
+#endif
+
+#ifdef __KERNEL__
+#ifdef CONFIG_IBM405_ERR77
+/* Erratum #77 on the 405 means we need a sync or dcbt before every
+ * stwcx.  The old ATOMIC_SYNC_FIX covered some but not all of this.
+ */
+#define PPC405_ERR77(ra,rb)	stringify_in_c(dcbt	ra, rb;)
+#define	PPC405_ERR77_SYNC	stringify_in_c(sync;)
+#else
+#define PPC405_ERR77(ra,rb)
+#define PPC405_ERR77_SYNC
+#endif
+#endif
+
+#endif /* _ASM_POWERPC_ASM_COMPAT_H */
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
new file mode 100644
index 00000000000..f3fc733758f
--- /dev/null
+++ b/arch/powerpc/include/asm/atomic.h
@@ -0,0 +1,479 @@
+#ifndef _ASM_POWERPC_ATOMIC_H_
+#define _ASM_POWERPC_ATOMIC_H_
+
+/*
+ * PowerPC atomic operations
+ */
+
+typedef struct { int counter; } atomic_t;
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <asm/synch.h>
+#include <asm/asm-compat.h>
+#include <asm/system.h>
+
+#define ATOMIC_INIT(i)		{ (i) }
+
+static __inline__ int atomic_read(const atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
+
+	return t;
+}
+
+static __inline__ void atomic_set(atomic_t *v, int i)
+{
+	__asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
+}
+
+static __inline__ void atomic_add(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_add\n\
+	add	%0,%2,%0\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_add_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# atomic_add_return\n\
+	add	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ void atomic_sub(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_sub\n\
+	subf	%0,%2,%0\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_sub_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# atomic_sub_return\n\
+	subf	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ void atomic_inc(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_inc\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_inc_return\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static __inline__ void atomic_dec(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_dec\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%2)\
+"	stwcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_dec_return\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int t;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_add_unless\n\
+	cmpw	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%1 \n\
+	bne-	1b \n"
+	ISYNC_ON_SMP
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&v->counter), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_sub_and_test(a, v)	(atomic_sub_return((a), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static __inline__ int atomic_dec_if_positive(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
+	cmpwi	%0,1\n\
+	addi	%0,%0,-1\n\
+	blt-	2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"	: "=&b" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define smp_mb__before_atomic_dec()     smp_mb()
+#define smp_mb__after_atomic_dec()      smp_mb()
+#define smp_mb__before_atomic_inc()     smp_mb()
+#define smp_mb__after_atomic_inc()      smp_mb()
+
+#ifdef __powerpc64__
+
+typedef struct { long counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+static __inline__ long atomic64_read(const atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
+
+	return t;
+}
+
+static __inline__ void atomic64_set(atomic64_t *v, long i)
+{
+	__asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
+}
+
+static __inline__ void atomic64_add(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# atomic64_add\n\
+	add	%0,%2,%0\n\
+	stdcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_add_return(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# atomic64_add_return\n\
+	add	%0,%1,%0\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+
+static __inline__ void atomic64_sub(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# atomic64_sub\n\
+	subf	%0,%2,%0\n\
+	stdcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
+	subf	%0,%1,%0\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ void atomic64_inc(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2		# atomic64_inc\n\
+	addic	%0,%0,1\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_inc_return(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
+	addic	%0,%0,1\n\
+	stdcx.	%0,0,%1 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+static __inline__ void atomic64_dec(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2		# atomic64_dec\n\
+	addic	%0,%0,-1\n\
+	stdcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_dec_return(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
+	addic	%0,%0,-1\n\
+	stdcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1.
+ */
+static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
+	addic.	%0,%0,-1\n\
+	blt-	2f\n\
+	stdcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long t;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic_add_unless\n\
+	cmpd	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+"	stdcx.	%0,0,%1 \n\
+	bne-	1b \n"
+	ISYNC_ON_SMP
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&v->counter), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#endif /* __powerpc64__ */
+
+#include <asm-generic/atomic.h>
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_ATOMIC_H_ */
diff --git a/arch/powerpc/include/asm/auxvec.h b/arch/powerpc/include/asm/auxvec.h
new file mode 100644
index 00000000000..19a099b62cd
--- /dev/null
+++ b/arch/powerpc/include/asm/auxvec.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_POWERPC_AUXVEC_H
+#define _ASM_POWERPC_AUXVEC_H
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE		19
+#define AT_ICACHEBSIZE		20
+#define AT_UCACHEBSIZE		21
+/* A special ignored type value for PPC, for glibc compatibility.  */
+#define AT_IGNOREPPC		22
+
+/* The vDSO location. We have to use the same value as x86 for glibc's
+ * sake :-)
+ */
+#define AT_SYSINFO_EHDR		33
+
+#endif
diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h
new file mode 100644
index 00000000000..8cf5c37c381
--- /dev/null
+++ b/arch/powerpc/include/asm/backlight.h
@@ -0,0 +1,41 @@
+/*
+ * Routines for handling backlight control on PowerBooks
+ *
+ * For now, implementation resides in
+ * arch/powerpc/platforms/powermac/backlight.c
+ *
+ */
+#ifndef __ASM_POWERPC_BACKLIGHT_H
+#define __ASM_POWERPC_BACKLIGHT_H
+#ifdef __KERNEL__
+
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+/* For locking instructions, see the implementation file */
+extern struct backlight_device *pmac_backlight;
+extern struct mutex pmac_backlight_mutex;
+
+extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
+
+extern int pmac_has_backlight_type(const char *type);
+
+extern void pmac_backlight_key(int direction);
+static inline void pmac_backlight_key_up(void)
+{
+	pmac_backlight_key(0);
+}
+static inline void pmac_backlight_key_down(void)
+{
+	pmac_backlight_key(1);
+}
+
+extern void pmac_backlight_set_legacy_brightness_pmu(int brightness);
+extern int pmac_backlight_set_legacy_brightness(int brightness);
+extern int pmac_backlight_get_legacy_brightness(void);
+
+extern void pmac_backlight_enable(void);
+extern void pmac_backlight_disable(void);
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
new file mode 100644
index 00000000000..897eade3afb
--- /dev/null
+++ b/arch/powerpc/include/asm/bitops.h
@@ -0,0 +1,410 @@
+/*
+ * PowerPC atomic bit operations.
+ *
+ * Merged version by David Gibson <david@gibson.dropbear.id.au>.
+ * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don
+ * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard.  They
+ * originally took it from the ppc32 code.
+ *
+ * Within a word, bits are numbered LSB first.  Lot's of places make
+ * this assumption by directly testing bits with (val & (1<<nr)).
+ * This can cause confusion for large (> 1 word) bitmaps on a
+ * big-endian system because, unlike little endian, the number of each
+ * bit depends on the word size.
+ *
+ * The bitop functions are defined to work on unsigned longs, so for a
+ * ppc64 system the bits end up numbered:
+ *   |63..............0|127............64|191...........128|255...........196|
+ * and on ppc32:
+ *   |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224|
+ *
+ * There are a few little-endian macros used mostly for filesystem
+ * bitmaps, these work on similar bit arrays layouts, but
+ * byte-oriented:
+ *   |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
+ *
+ * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit
+ * number field needs to be reversed compared to the big-endian bit
+ * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_BITOPS_H
+#define _ASM_POWERPC_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/asm-compat.h>
+#include <asm/synch.h>
+
+/*
+ * clear_bit doesn't imply a memory barrier
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+
+#define BITOP_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
+#define BITOP_WORD(nr)		((nr) / BITS_PER_LONG)
+#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
+
+static __inline__ void set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# set_bit\n"
+	"or	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# clear_bit\n"
+	"andc	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3	# clear_bit_unlock\n"
+	"andc	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# change_bit\n"
+	"xor	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ int test_and_set_bit(unsigned long nr,
+				       volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit\n"
+	"or	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_set_bit_lock(unsigned long nr,
+				       volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit_lock\n"
+	"or	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_clear_bit(unsigned long nr,
+					 volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_clear_bit\n"
+	"andc	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_change_bit(unsigned long nr,
+					  volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_change_bit\n"
+	"xor	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
+{
+        unsigned long old;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3         # set_bits\n"
+	"or	%0,%0,%2\n"
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*addr)
+	: "r" (mask), "r" (addr)
+	: "cc");
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
+{
+	__asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory");
+	__clear_bit(nr, addr);
+}
+
+/*
+ * Return the zero-based bit position (LE, not IBM bit numbering) of
+ * the most significant 1-bit in a double word.
+ */
+static __inline__ __attribute__((const))
+int __ilog2(unsigned long x)
+{
+	int lz;
+
+	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x));
+	return BITS_PER_LONG - 1 - lz;
+}
+
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+	int bit;
+	asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n));
+	return 31 - bit;
+}
+
+#ifdef __powerpc64__
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+	int bit;
+	asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n));
+	return 63 - bit;
+}
+#endif
+
+/*
+ * Determines the bit position of the least significant 0 bit in the
+ * specified double word. The returned bit position will be
+ * zero-based, starting from the right side (63/31 - 0).
+ */
+static __inline__ unsigned long ffz(unsigned long x)
+{
+	/* no zero exists anywhere in the 8 byte area. */
+	if ((x = ~x) == 0)
+		return BITS_PER_LONG;
+
+	/*
+	 * Calculate the bit position of the least signficant '1' bit in x
+	 * (since x has been changed this will actually be the least signficant
+	 * '0' bit in * the original x).  Note: (x & -x) gives us a mask that
+	 * is the least significant * (RIGHT-most) 1-bit of the value in x.
+	 */
+	return __ilog2(x & -x);
+}
+
+static __inline__ int __ffs(unsigned long x)
+{
+	return __ilog2(x & -x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	unsigned long i = (unsigned long)x;
+	return __ilog2(i & -i) + 1;
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static __inline__ int fls(unsigned int x)
+{
+	int lz;
+
+	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+	return 32 - lz;
+}
+
+static __inline__ unsigned long __fls(unsigned long x)
+{
+	return __ilog2(x);
+}
+
+/*
+ * 64-bit can do this using one cntlzd (count leading zeroes doubleword)
+ * instruction; for 32-bit we use the generic version, which does two
+ * 32-bit fls calls.
+ */
+#ifdef __powerpc64__
+static __inline__ int fls64(__u64 x)
+{
+	int lz;
+
+	asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x));
+	return 64 - lz;
+}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif /* __powerpc64__ */
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/find.h>
+
+/* Little-endian versions */
+
+static __inline__ int test_le_bit(unsigned long nr,
+				  __const__ unsigned long *addr)
+{
+	__const__ unsigned char	*tmp = (__const__ unsigned char *) addr;
+	return (tmp[nr >> 3] >> (nr & 7)) & 1;
+}
+
+#define __set_le_bit(nr, addr) \
+	__set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define __clear_le_bit(nr, addr) \
+	__clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define test_and_set_le_bit(nr, addr) \
+	test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define test_and_clear_le_bit(nr, addr) \
+	test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define __test_and_set_le_bit(nr, addr) \
+	__test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define __test_and_clear_le_bit(nr, addr) \
+	__test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0)
+unsigned long generic_find_next_zero_le_bit(const unsigned long *addr,
+				    unsigned long size, unsigned long offset);
+
+unsigned long generic_find_next_le_bit(const unsigned long *addr,
+				    unsigned long size, unsigned long offset);
+/* Bitmap functions for the ext2 filesystem */
+
+#define ext2_set_bit(nr,addr) \
+	__test_and_set_le_bit((nr), (unsigned long*)addr)
+#define ext2_clear_bit(nr, addr) \
+	__test_and_clear_le_bit((nr), (unsigned long*)addr)
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+	test_and_set_le_bit((nr), (unsigned long*)addr)
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+	test_and_clear_le_bit((nr), (unsigned long*)addr)
+
+#define ext2_test_bit(nr, addr)      test_le_bit((nr),(unsigned long*)addr)
+
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_le_bit((unsigned long*)addr, size)
+#define ext2_find_next_zero_bit(addr, size, off) \
+	generic_find_next_zero_le_bit((unsigned long*)addr, size, off)
+
+#define ext2_find_next_bit(addr, size, off) \
+	generic_find_next_le_bit((unsigned long *)addr, size, off)
+/* Bitmap functions for the minix filesystem.  */
+
+#define minix_test_and_set_bit(nr,addr) \
+	__test_and_set_le_bit(nr, (unsigned long *)addr)
+#define minix_set_bit(nr,addr) \
+	__set_le_bit(nr, (unsigned long *)addr)
+#define minix_test_and_clear_bit(nr,addr) \
+	__test_and_clear_le_bit(nr, (unsigned long *)addr)
+#define minix_test_bit(nr,addr) \
+	test_le_bit(nr, (unsigned long *)addr)
+
+#define minix_find_first_zero_bit(addr,size) \
+	find_first_zero_le_bit((unsigned long *)addr, size)
+
+#include <asm-generic/bitops/sched.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_BITOPS_H */
diff --git a/arch/powerpc/include/asm/bootx.h b/arch/powerpc/include/asm/bootx.h
new file mode 100644
index 00000000000..57b82e3f89c
--- /dev/null
+++ b/arch/powerpc/include/asm/bootx.h
@@ -0,0 +1,171 @@
+/*
+ * This file describes the structure passed from the BootX application
+ * (for MacOS) when it is used to boot Linux.
+ *
+ * Written by Benjamin Herrenschmidt.
+ */
+
+
+#ifndef __ASM_BOOTX_H__
+#define __ASM_BOOTX_H__
+
+#include <asm/types.h>
+
+#ifdef macintosh
+#include <Types.h>
+#include "linux_type_defs.h"
+#endif
+
+#ifdef macintosh
+/* All this requires PowerPC alignment */
+#pragma options align=power
+#endif
+
+/* On kernel entry:
+ *
+ * r3 = 0x426f6f58    ('BooX')
+ * r4 = pointer to boot_infos
+ * r5 = NULL
+ *
+ * Data and instruction translation disabled, interrupts
+ * disabled, kernel loaded at physical 0x00000000 on PCI
+ * machines (will be different on NuBus).
+ */
+
+#define BOOT_INFO_VERSION               5
+#define BOOT_INFO_COMPATIBLE_VERSION    1
+
+/* Bit in the architecture flag mask. More to be defined in
+   future versions. Note that either BOOT_ARCH_PCI or
+   BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
+   set additionally when BOOT_ARCH_NUBUS is set.
+ */
+#define BOOT_ARCH_PCI                   0x00000001UL
+#define BOOT_ARCH_NUBUS                 0x00000002UL
+#define BOOT_ARCH_NUBUS_PDM             0x00000010UL
+#define BOOT_ARCH_NUBUS_PERFORMA        0x00000020UL
+#define BOOT_ARCH_NUBUS_POWERBOOK       0x00000040UL
+
+/*  Maximum number of ranges in phys memory map */
+#define MAX_MEM_MAP_SIZE				26
+
+/* This is the format of an element in the physical memory map. Note that
+   the map is optional and current BootX will only build it for pre-PCI
+   machines */
+typedef struct boot_info_map_entry
+{
+    __u32       physAddr;                /* Physical starting address */
+    __u32       size;                    /* Size in bytes */
+} boot_info_map_entry_t;
+
+
+/* Here are the boot informations that are passed to the bootstrap
+ * Note that the kernel arguments and the device tree are appended
+ * at the end of this structure. */
+typedef struct boot_infos
+{
+    /* Version of this structure */
+    __u32       version;
+    /* backward compatible down to version: */
+    __u32       compatible_version;
+
+    /* NEW (vers. 2) this holds the current _logical_ base addr of
+       the frame buffer (for use by early boot message) */
+    __u8*       logicalDisplayBase;
+
+    /* NEW (vers. 4) Apple's machine identification */
+    __u32       machineID;
+
+    /* NEW (vers. 4) Detected hw architecture */
+    __u32       architecture;
+
+    /* The device tree (internal addresses relative to the beginning of the tree,
+     * device tree offset relative to the beginning of this structure).
+     * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
+     * field is 0.
+     */
+    __u32       deviceTreeOffset;        /* Device tree offset */
+    __u32       deviceTreeSize;          /* Size of the device tree */
+
+    /* Some infos about the current MacOS display */
+    __u32       dispDeviceRect[4];       /* left,top,right,bottom */
+    __u32       dispDeviceDepth;         /* (8, 16 or 32) */
+    __u8*       dispDeviceBase;          /* base address (physical) */
+    __u32       dispDeviceRowBytes;      /* rowbytes (in bytes) */
+    __u32       dispDeviceColorsOffset;  /* Colormap (8 bits only) or 0 (*) */
+    /* Optional offset in the registry to the current
+     * MacOS display. (Can be 0 when not detected) */
+     __u32      dispDeviceRegEntryOffset;
+
+    /* Optional pointer to boot ramdisk (offset from this structure) */
+    __u32       ramDisk;
+    __u32       ramDiskSize;             /* size of ramdisk image */
+
+    /* Kernel command line arguments (offset from this structure) */
+    __u32       kernelParamsOffset;
+
+    /* ALL BELOW NEW (vers. 4) */
+
+    /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
+       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
+       device-tree. */
+    boot_info_map_entry_t
+    	        physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
+    __u32       physMemoryMapSize;               /* How many entries in map */
+
+
+    /* The framebuffer size (optional, currently 0) */
+    __u32       frameBufferSize;         /* Represents a max size, can be 0. */
+
+    /* NEW (vers. 5) */
+
+    /* Total params size (args + colormap + device tree + ramdisk) */
+    __u32       totalParamsSize;
+
+} boot_infos_t;
+
+#ifdef __KERNEL__
+/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index
+ * is represented by 3 short words containing a 16 bits (unsigned) color
+ * component. Later versions may contain the gamma table for direct-color
+ * devices here.
+ */
+#define BOOTX_COLORTABLE_SIZE    (256UL*3UL*2UL)
+
+/* BootX passes the device-tree using a format that comes from earlier
+ * ppc32 kernels. This used to match what is in prom.h, but not anymore
+ * so we now define it here
+ */
+struct bootx_dt_prop {
+	u32	name;
+	int	length;
+	u32	value;
+	u32	next;
+};
+
+struct bootx_dt_node {
+	u32	unused0;
+	u32	unused1;
+	u32	phandle;	/* not really available */
+	u32	unused2;
+	u32	unused3;
+	u32	unused4;
+	u32	unused5;
+	u32	full_name;
+	u32	properties;
+	u32	parent;
+	u32	child;
+	u32	sibling;
+	u32	next;
+	u32	allnext;
+};
+
+extern void bootx_init(unsigned long r4, unsigned long phys);
+
+#endif /* __KERNEL__ */
+
+#ifdef macintosh
+#pragma options align=reset
+#endif
+
+#endif
diff --git a/arch/powerpc/include/asm/btext.h b/arch/powerpc/include/asm/btext.h
new file mode 100644
index 00000000000..906f46e3100
--- /dev/null
+++ b/arch/powerpc/include/asm/btext.h
@@ -0,0 +1,28 @@
+/*
+ * Definitions for using the procedures in btext.c.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#ifndef __PPC_BTEXT_H
+#define __PPC_BTEXT_H
+#ifdef __KERNEL__
+
+extern int btext_find_display(int allow_nonstdout);
+extern void btext_update_display(unsigned long phys, int width, int height,
+				 int depth, int pitch);
+extern void btext_setup_display(int width, int height, int depth, int pitch,
+				unsigned long address);
+extern void btext_prepare_BAT(void);
+extern void btext_unmap(void);
+
+extern void btext_drawchar(char c);
+extern void btext_drawstring(const char *str);
+extern void btext_drawhex(unsigned long v);
+extern void btext_drawtext(const char *c, unsigned int len);
+
+extern void btext_clearscreen(void);
+extern void btext_flushscreen(void);
+extern void btext_flushline(void);
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_BTEXT_H */
diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
new file mode 100644
index 00000000000..e55d1f66b86
--- /dev/null
+++ b/arch/powerpc/include/asm/bug.h
@@ -0,0 +1,121 @@
+#ifndef _ASM_POWERPC_BUG_H
+#define _ASM_POWERPC_BUG_H
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+/*
+ * Define an illegal instr to trap on the bug.
+ * We don't use 0 because that marks the end of a function
+ * in the ELF ABI.  That's "Boo Boo" in case you wonder...
+ */
+#define BUG_OPCODE .long 0x00b00b00  /* For asm */
+#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */
+
+#ifdef CONFIG_BUG
+
+#ifdef __ASSEMBLY__
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+.macro EMIT_BUG_ENTRY addr,file,line,flags
+	 .section __bug_table,"a"
+5001:	 PPC_LONG \addr, 5002f
+	 .short \line, \flags
+	 .org 5001b+BUG_ENTRY_SIZE
+	 .previous
+	 .section .rodata,"a"
+5002:	 .asciz "\file"
+	 .previous
+.endm
+#else
+ .macro EMIT_BUG_ENTRY addr,file,line,flags
+	 .section __bug_table,"a"
+5001:	 PPC_LONG \addr
+	 .short \flags
+	 .org 5001b+BUG_ENTRY_SIZE
+	 .previous
+.endm
+#endif /* verbose */
+
+#else /* !__ASSEMBLY__ */
+/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
+   sizeof(struct bug_entry), respectively */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY				\
+	".section __bug_table,\"a\"\n"		\
+	"2:\t" PPC_LONG "1b, %0\n"		\
+	"\t.short %1, %2\n"			\
+	".org 2b+%3\n"				\
+	".previous\n"
+#else
+#define _EMIT_BUG_ENTRY				\
+	".section __bug_table,\"a\"\n"		\
+	"2:\t" PPC_LONG "1b\n"			\
+	"\t.short %2\n"				\
+	".org 2b+%3\n"				\
+	".previous\n"
+#endif
+
+/*
+ * BUG_ON() and WARN_ON() do their best to cooperate with compile-time
+ * optimisations. However depending on the complexity of the condition
+ * some compiler versions may not produce optimal results.
+ */
+
+#define BUG() do {						\
+	__asm__ __volatile__(					\
+		"1:	twi 31,0,0\n"				\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		    "i" (0), "i"  (sizeof(struct bug_entry)));	\
+	for(;;) ;						\
+} while (0)
+
+#define BUG_ON(x) do {						\
+	if (__builtin_constant_p(x)) {				\
+		if (x)						\
+			BUG();					\
+	} else {						\
+		__asm__ __volatile__(				\
+		"1:	"PPC_TLNEI"	%4,0\n"			\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__), "i" (0),	\
+		  "i" (sizeof(struct bug_entry)),		\
+		  "r" ((__force long)(x)));			\
+	}							\
+} while (0)
+
+#define __WARN() do {						\
+	__asm__ __volatile__(					\
+		"1:	twi 31,0,0\n"				\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		  "i" (BUGFLAG_WARNING),			\
+		  "i" (sizeof(struct bug_entry)));		\
+} while (0)
+
+#define WARN_ON(x) ({						\
+	int __ret_warn_on = !!(x);				\
+	if (__builtin_constant_p(__ret_warn_on)) {		\
+		if (__ret_warn_on)				\
+			__WARN();				\
+	} else {						\
+		__asm__ __volatile__(				\
+		"1:	"PPC_TLNEI"	%4,0\n"			\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		  "i" (BUGFLAG_WARNING),			\
+		  "i" (sizeof(struct bug_entry)),		\
+		  "r" (__ret_warn_on));				\
+	}							\
+	unlikely(__ret_warn_on);				\
+})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_BUG_ON
+#define HAVE_ARCH_WARN_ON
+#endif /* __ASSEMBLY __ */
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_BUG_H */
diff --git a/arch/powerpc/include/asm/bugs.h b/arch/powerpc/include/asm/bugs.h
new file mode 100644
index 00000000000..42fdb73e306
--- /dev/null
+++ b/arch/powerpc/include/asm/bugs.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_POWERPC_BUGS_H
+#define _ASM_POWERPC_BUGS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This file is included by 'init/main.c' to check for
+ * architecture-dependent bugs.
+ */
+
+static inline void check_bugs(void) { }
+
+#endif	/* _ASM_POWERPC_BUGS_H */
diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/asm/byteorder.h
new file mode 100644
index 00000000000..b37752214a1
--- /dev/null
+++ b/arch/powerpc/include/asm/byteorder.h
@@ -0,0 +1,89 @@
+#ifndef _ASM_POWERPC_BYTEORDER_H
+#define _ASM_POWERPC_BYTEORDER_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+#ifdef __KERNEL__
+
+static __inline__ __u16 ld_le16(const volatile __u16 *addr)
+{
+	__u16 val;
+
+	__asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+static __inline__ void st_le16(volatile __u16 *addr, const __u16 val)
+{
+	__asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __u32 ld_le32(const volatile __u32 *addr)
+{
+	__u32 val;
+
+	__asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+static __inline__ void st_le32(volatile __u32 *addr, const __u32 val)
+{
+	__asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
+{
+	__u16 result;
+
+	__asm__("rlwimi %0,%1,8,16,23"
+	    : "=r" (result)
+	    : "r" (value), "0" (value >> 8));
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
+{
+	__u32 result;
+
+	__asm__("rlwimi %0,%1,24,16,23\n\t"
+	    "rlwimi %0,%1,8,8,15\n\t"
+	    "rlwimi %0,%1,24,0,7"
+	    : "=r" (result)
+	    : "r" (value), "0" (value >> 24));
+	return result;
+}
+
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+
+/* The same, but returns converted value from the location pointer by addr. */
+#define __arch__swab16p(addr) ld_le16(addr)
+#define __arch__swab32p(addr) ld_le32(addr)
+
+/* The same, but do the conversion in situ, ie. put the value back to addr. */
+#define __arch__swab16s(addr) st_le16(addr,*addr)
+#define __arch__swab32s(addr) st_le32(addr,*addr)
+
+#endif /* __KERNEL__ */
+
+#ifndef __STRICT_ANSI__
+#define __BYTEORDER_HAS_U64__
+#ifndef __powerpc64__
+#define __SWAB_64_THRU_32__
+#endif /* __powerpc64__ */
+#endif /* __STRICT_ANSI__ */
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_POWERPC_BYTEORDER_H */
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
new file mode 100644
index 00000000000..81de6eb3455
--- /dev/null
+++ b/arch/powerpc/include/asm/cache.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_POWERPC_CACHE_H
+#define _ASM_POWERPC_CACHE_H
+
+#ifdef __KERNEL__
+
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+#define L1_CACHE_SHIFT		4
+#define MAX_COPY_PREFETCH	1
+#elif defined(CONFIG_PPC_E500MC)
+#define L1_CACHE_SHIFT		6
+#define MAX_COPY_PREFETCH	4
+#elif defined(CONFIG_PPC32)
+#define L1_CACHE_SHIFT		5
+#define MAX_COPY_PREFETCH	4
+#else /* CONFIG_PPC64 */
+#define L1_CACHE_SHIFT		7
+#endif
+
+#define	L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define	SMP_CACHE_BYTES		L1_CACHE_BYTES
+
+#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
+struct ppc64_caches {
+	u32	dsize;			/* L1 d-cache size */
+	u32	dline_size;		/* L1 d-cache line size	*/
+	u32	log_dline_size;
+	u32	dlines_per_page;
+	u32	isize;			/* L1 i-cache size */
+	u32	iline_size;		/* L1 i-cache line size	*/
+	u32	log_iline_size;
+	u32	ilines_per_page;
+};
+
+extern struct ppc64_caches ppc64_caches;
+#endif /* __powerpc64__ && ! __ASSEMBLY__ */
+
+#if !defined(__ASSEMBLY__)
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_CACHE_H */
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
new file mode 100644
index 00000000000..ba667a383b8
--- /dev/null
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -0,0 +1,75 @@
+/*
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_CACHEFLUSH_H
+#define _ASM_POWERPC_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h>
+#include <asm/cputable.h>
+
+/*
+ * No cache flushing is required when address mappings are changed,
+ * because the caches on PowerPCs are physically addressed.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma, page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+extern void flush_dcache_page(struct page *page);
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void __flush_icache_range(unsigned long, unsigned long);
+static inline void flush_icache_range(unsigned long start, unsigned long stop)
+{
+	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		__flush_icache_range(start, stop);
+}
+
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+extern void __flush_dcache_icache(void *page_va);
+extern void flush_dcache_icache_page(struct page *page);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
+extern void __flush_dcache_icache_phys(unsigned long physaddr);
+#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
+
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+#ifdef CONFIG_PPC32
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+#endif /* CONFIG_PPC32 */
+#ifdef CONFIG_PPC64
+extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
+#endif
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do { \
+		memcpy(dst, src, len); \
+		flush_icache_user_range(vma, page, vaddr, len); \
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+/* internal debugging function */
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_CACHEFLUSH_H */
diff --git a/arch/powerpc/include/asm/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h
new file mode 100644
index 00000000000..8066eede3a0
--- /dev/null
+++ b/arch/powerpc/include/asm/cell-pmu.h
@@ -0,0 +1,105 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author:
+ *   David Erb (djerb@us.ibm.com)
+ *   Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_CELL_PMU_H__
+#define __ASM_CELL_PMU_H__
+
+/* The Cell PMU has four hardware performance counters, which can be
+ * configured as four 32-bit counters or eight 16-bit counters.
+ */
+#define NR_PHYS_CTRS 4
+#define NR_CTRS      (NR_PHYS_CTRS * 2)
+
+/* Macros for the pm_control register. */
+#define CBE_PM_16BIT_CTR(ctr)              (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
+#define CBE_PM_ENABLE_PERF_MON             0x80000000
+#define CBE_PM_STOP_AT_MAX                 0x40000000
+#define CBE_PM_TRACE_MODE_GET(pm_control)  (((pm_control) >> 28) & 0x3)
+#define CBE_PM_TRACE_MODE_SET(mode)        (((mode)  & 0x3) << 28)
+#define CBE_PM_COUNT_MODE_SET(count)       (((count) & 0x3) << 18)
+#define CBE_PM_FREEZE_ALL_CTRS             0x00100000
+#define CBE_PM_ENABLE_EXT_TRACE            0x00008000
+
+/* Macros for the trace_address register. */
+#define CBE_PM_TRACE_BUF_FULL              0x00000800
+#define CBE_PM_TRACE_BUF_EMPTY             0x00000400
+#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)    ((ta) & 0x3ff)
+#define CBE_PM_TRACE_BUF_MAX_COUNT         0x400
+
+/* Macros for the pm07_control registers. */
+#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f)
+#define CBE_PM_CTR_INPUT_CONTROL           0x02000000
+#define CBE_PM_CTR_POLARITY                0x01000000
+#define CBE_PM_CTR_COUNT_CYCLES            0x00800000
+#define CBE_PM_CTR_ENABLE                  0x00400000
+#define PM07_CTR_INPUT_MUX(x)              (((x) & 0x3F) << 26)
+#define PM07_CTR_INPUT_CONTROL(x)          (((x) & 1) << 25)
+#define PM07_CTR_POLARITY(x)               (((x) & 1) << 24)
+#define PM07_CTR_COUNT_CYCLES(x)           (((x) & 1) << 23)
+#define PM07_CTR_ENABLE(x)                 (((x) & 1) << 22)
+
+/* Macros for the pm_status register. */
+#define CBE_PM_CTR_OVERFLOW_INTR(ctr)      (1 << (31 - ((ctr) & 7)))
+
+enum pm_reg_name {
+	group_control,
+	debug_bus_control,
+	trace_address,
+	ext_tr_timer,
+	pm_status,
+	pm_control,
+	pm_interval,
+	pm_start_stop,
+};
+
+/* Routines for reading/writing the PMU registers. */
+extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
+extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
+extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
+extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+extern u32  cbe_read_pm(u32 cpu, enum pm_reg_name reg);
+extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
+extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+extern void cbe_enable_pm(u32 cpu);
+extern void cbe_disable_pm(u32 cpu);
+
+extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
+
+extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
+extern void cbe_disable_pm_interrupts(u32 cpu);
+extern u32  cbe_get_and_clear_pm_interrupts(u32 cpu);
+extern void cbe_sync_irq(int node);
+
+#define CBE_COUNT_SUPERVISOR_MODE       0
+#define CBE_COUNT_HYPERVISOR_MODE       1
+#define CBE_COUNT_PROBLEM_MODE          2
+#define CBE_COUNT_ALL_MODES             3
+
+#endif /* __ASM_CELL_PMU_H__ */
diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h
new file mode 100644
index 00000000000..fd6fd00434e
--- /dev/null
+++ b/arch/powerpc/include/asm/cell-regs.h
@@ -0,0 +1,315 @@
+/*
+ * cbe_regs.h
+ *
+ * This file is intended to hold the various register definitions for CBE
+ * on-chip system devices (memory controller, IO controller, etc...)
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Authors: Maximino Aguilar (maguilar@us.ibm.com)
+ *          David J. Erb (djerb@us.ibm.com)
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+#ifndef CBE_REGS_H
+#define CBE_REGS_H
+
+#include <asm/cell-pmu.h>
+
+/*
+ *
+ * Some HID register definitions
+ *
+ */
+
+/* CBE specific HID0 bits */
+#define HID0_CBE_THERM_WAKEUP	0x0000020000000000ul
+#define HID0_CBE_SYSERR_WAKEUP	0x0000008000000000ul
+#define HID0_CBE_THERM_INT_EN	0x0000000400000000ul
+#define HID0_CBE_SYSERR_INT_EN	0x0000000200000000ul
+
+#define MAX_CBE		2
+
+/*
+ *
+ * Pervasive unit register definitions
+ *
+ */
+
+union spe_reg {
+	u64 val;
+	u8 spe[8];
+};
+
+union ppe_spe_reg {
+	u64 val;
+	struct {
+		u32 ppe;
+		u32 spe;
+	};
+};
+
+
+struct cbe_pmd_regs {
+	/* Debug Bus Control */
+	u64	pad_0x0000;					/* 0x0000 */
+
+	u64	group_control;					/* 0x0008 */
+
+	u8	pad_0x0010_0x00a8 [0x00a8 - 0x0010];		/* 0x0010 */
+
+	u64	debug_bus_control;				/* 0x00a8 */
+
+	u8	pad_0x00b0_0x0100 [0x0100 - 0x00b0];		/* 0x00b0 */
+
+	u64	trace_aux_data;					/* 0x0100 */
+	u64	trace_buffer_0_63;				/* 0x0108 */
+	u64	trace_buffer_64_127;				/* 0x0110 */
+	u64	trace_address;					/* 0x0118 */
+	u64	ext_tr_timer;					/* 0x0120 */
+
+	u8	pad_0x0128_0x0400 [0x0400 - 0x0128];		/* 0x0128 */
+
+	/* Performance Monitor */
+	u64	pm_status;					/* 0x0400 */
+	u64	pm_control;					/* 0x0408 */
+	u64	pm_interval;					/* 0x0410 */
+	u64	pm_ctr[4];					/* 0x0418 */
+	u64	pm_start_stop;					/* 0x0438 */
+	u64	pm07_control[8];				/* 0x0440 */
+
+	u8	pad_0x0480_0x0800 [0x0800 - 0x0480];		/* 0x0480 */
+
+	/* Thermal Sensor Registers */
+	union	spe_reg	ts_ctsr1;				/* 0x0800 */
+	u64	ts_ctsr2;					/* 0x0808 */
+	union	spe_reg	ts_mtsr1;				/* 0x0810 */
+	u64	ts_mtsr2;					/* 0x0818 */
+	union	spe_reg	ts_itr1;				/* 0x0820 */
+	u64	ts_itr2;					/* 0x0828 */
+	u64	ts_gitr;					/* 0x0830 */
+	u64	ts_isr;						/* 0x0838 */
+	u64	ts_imr;						/* 0x0840 */
+	union	spe_reg	tm_cr1;					/* 0x0848 */
+	u64	tm_cr2;						/* 0x0850 */
+	u64	tm_simr;					/* 0x0858 */
+	union	ppe_spe_reg tm_tpr;				/* 0x0860 */
+	union	spe_reg	tm_str1;				/* 0x0868 */
+	u64	tm_str2;					/* 0x0870 */
+	union	ppe_spe_reg tm_tsr;				/* 0x0878 */
+
+	/* Power Management */
+	u64	pmcr;						/* 0x0880 */
+#define CBE_PMD_PAUSE_ZERO_CONTROL	0x10000
+	u64	pmsr;						/* 0x0888 */
+
+	/* Time Base Register */
+	u64	tbr;						/* 0x0890 */
+
+	u8	pad_0x0898_0x0c00 [0x0c00 - 0x0898];		/* 0x0898 */
+
+	/* Fault Isolation Registers */
+	u64	checkstop_fir;					/* 0x0c00 */
+	u64	recoverable_fir;				/* 0x0c08 */
+	u64	spec_att_mchk_fir;				/* 0x0c10 */
+	u32	fir_mode_reg;					/* 0x0c18 */
+	u8	pad_0x0c1c_0x0c20 [4];				/* 0x0c1c */
+#define CBE_PMD_FIR_MODE_M8		0x00800
+	u64	fir_enable_mask;				/* 0x0c20 */
+
+	u8	pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];		/* 0x0c28 */
+	u64	ras_esc_0;					/* 0x0ca8 */
+	u8	pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];		/* 0x0cb0 */
+};
+
+extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
+extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
+
+/*
+ * PMU shadow registers
+ *
+ * Many of the registers in the performance monitoring unit are write-only,
+ * so we need to save a copy of what we write to those registers.
+ *
+ * The actual data counters are read/write. However, writing to the counters
+ * only takes effect if the PMU is enabled. Otherwise the value is stored in
+ * a hardware latch until the next time the PMU is enabled. So we save a copy
+ * of the counter values if we need to read them back while the PMU is
+ * disabled. The counter_value_in_latch field is a bitmap indicating which
+ * counters currently have a value waiting to be written.
+ */
+
+struct cbe_pmd_shadow_regs {
+	u32 group_control;
+	u32 debug_bus_control;
+	u32 trace_address;
+	u32 ext_tr_timer;
+	u32 pm_status;
+	u32 pm_control;
+	u32 pm_interval;
+	u32 pm_start_stop;
+	u32 pm07_control[NR_CTRS];
+
+	u32 pm_ctr[NR_PHYS_CTRS];
+	u32 counter_value_in_latch;
+};
+
+extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
+extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
+
+/*
+ *
+ * IIC unit register definitions
+ *
+ */
+
+struct cbe_iic_pending_bits {
+	u32 data;
+	u8 flags;
+	u8 class;
+	u8 source;
+	u8 prio;
+};
+
+#define CBE_IIC_IRQ_VALID	0x80
+#define CBE_IIC_IRQ_IPI		0x40
+
+struct cbe_iic_thread_regs {
+	struct cbe_iic_pending_bits pending;
+	struct cbe_iic_pending_bits pending_destr;
+	u64 generate;
+	u64 prio;
+};
+
+struct cbe_iic_regs {
+	u8	pad_0x0000_0x0400[0x0400 - 0x0000];		/* 0x0000 */
+
+	/* IIC interrupt registers */
+	struct	cbe_iic_thread_regs thread[2];			/* 0x0400 */
+
+	u64	iic_ir;						/* 0x0440 */
+#define CBE_IIC_IR_PRIO(x)      (((x) & 0xf) << 12)
+#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
+#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
+#define CBE_IIC_IR_IOC_0        0x0
+#define CBE_IIC_IR_IOC_1S       0xb
+#define CBE_IIC_IR_PT_0         0xe
+#define CBE_IIC_IR_PT_1         0xf
+
+	u64	iic_is;						/* 0x0448 */
+#define CBE_IIC_IS_PMI		0x2
+
+	u8	pad_0x0450_0x0500[0x0500 - 0x0450];		/* 0x0450 */
+
+	/* IOC FIR */
+	u64	ioc_fir_reset;					/* 0x0500 */
+	u64	ioc_fir_set;					/* 0x0508 */
+	u64	ioc_checkstop_enable;				/* 0x0510 */
+	u64	ioc_fir_error_mask;				/* 0x0518 */
+	u64	ioc_syserr_enable;				/* 0x0520 */
+	u64	ioc_fir;					/* 0x0528 */
+
+	u8	pad_0x0530_0x1000[0x1000 - 0x0530];		/* 0x0530 */
+};
+
+extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
+extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
+
+
+struct cbe_mic_tm_regs {
+	u8	pad_0x0000_0x0040[0x0040 - 0x0000];		/* 0x0000 */
+
+	u64	mic_ctl_cnfg2;					/* 0x0040 */
+#define CBE_MIC_ENABLE_AUX_TRC		0x8000000000000000LL
+#define CBE_MIC_DISABLE_PWR_SAV_2	0x0200000000000000LL
+#define CBE_MIC_DISABLE_AUX_TRC_WRAP	0x0100000000000000LL
+#define CBE_MIC_ENABLE_AUX_TRC_INT	0x0080000000000000LL
+
+	u64	pad_0x0048;					/* 0x0048 */
+
+	u64	mic_aux_trc_base;				/* 0x0050 */
+	u64	mic_aux_trc_max_addr;				/* 0x0058 */
+	u64	mic_aux_trc_cur_addr;				/* 0x0060 */
+	u64	mic_aux_trc_grf_addr;				/* 0x0068 */
+	u64	mic_aux_trc_grf_data;				/* 0x0070 */
+
+	u64	pad_0x0078;					/* 0x0078 */
+
+	u64	mic_ctl_cnfg_0;					/* 0x0080 */
+#define CBE_MIC_DISABLE_PWR_SAV_0	0x8000000000000000LL
+
+	u64	pad_0x0088;					/* 0x0088 */
+
+	u64	slow_fast_timer_0;				/* 0x0090 */
+	u64	slow_next_timer_0;				/* 0x0098 */
+
+	u8	pad_0x00a0_0x00f8[0x00f8 - 0x00a0];		/* 0x00a0 */
+	u64    	mic_df_ecc_address_0;				/* 0x00f8 */
+
+	u8	pad_0x0100_0x01b8[0x01b8 - 0x0100];		/* 0x0100 */
+	u64    	mic_df_ecc_address_1;				/* 0x01b8 */
+
+	u64	mic_ctl_cnfg_1;					/* 0x01c0 */
+#define CBE_MIC_DISABLE_PWR_SAV_1	0x8000000000000000LL
+
+	u64	pad_0x01c8;					/* 0x01c8 */
+
+	u64	slow_fast_timer_1;				/* 0x01d0 */
+	u64	slow_next_timer_1;				/* 0x01d8 */
+
+	u8	pad_0x01e0_0x0208[0x0208 - 0x01e0];		/* 0x01e0 */
+	u64	mic_exc;					/* 0x0208 */
+#define CBE_MIC_EXC_BLOCK_SCRUB		0x0800000000000000ULL
+#define CBE_MIC_EXC_FAST_SCRUB		0x0100000000000000ULL
+
+	u64	mic_mnt_cfg;					/* 0x0210 */
+#define CBE_MIC_MNT_CFG_CHAN_0_POP	0x0002000000000000ULL
+#define CBE_MIC_MNT_CFG_CHAN_1_POP	0x0004000000000000ULL
+
+	u64	mic_df_config;					/* 0x0218 */
+#define CBE_MIC_ECC_DISABLE_0		0x4000000000000000ULL
+#define CBE_MIC_ECC_REP_SINGLE_0	0x2000000000000000ULL
+#define CBE_MIC_ECC_DISABLE_1		0x0080000000000000ULL
+#define CBE_MIC_ECC_REP_SINGLE_1	0x0040000000000000ULL
+
+	u8	pad_0x0220_0x0230[0x0230 - 0x0220];		/* 0x0220 */
+	u64	mic_fir;					/* 0x0230 */
+#define CBE_MIC_FIR_ECC_SINGLE_0_ERR	0x0200000000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_ERR	0x0100000000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_ERR	0x0080000000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_ERR	0x0040000000000000ULL
+#define CBE_MIC_FIR_ECC_ERR_MASK	0xffff000000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_CTE	0x0000020000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_CTE	0x0000010000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_CTE	0x0000008000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_CTE	0x0000004000000000ULL
+#define CBE_MIC_FIR_ECC_CTE_MASK	0x0000ffff00000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_RESET	0x0000000002000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_RESET	0x0000000001000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_RESET	0x0000000000800000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_RESET	0x0000000000400000ULL
+#define CBE_MIC_FIR_ECC_RESET_MASK	0x00000000ffff0000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_SET	0x0000000000000200ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_SET	0x0000000000000100ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_SET	0x0000000000000080ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_SET	0x0000000000000040ULL
+#define CBE_MIC_FIR_ECC_SET_MASK	0x000000000000ffffULL
+	u64	mic_fir_debug;					/* 0x0238 */
+
+	u8	pad_0x0240_0x1000[0x1000 - 0x0240];		/* 0x0240 */
+};
+
+extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
+extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
+
+/* some utility functions to deal with SMT */
+extern u32 cbe_get_hw_thread_id(int cpu);
+extern u32 cbe_cpu_to_node(int cpu);
+extern u32 cbe_node_to_cpu(int node);
+
+/* Init this module early */
+extern void cbe_regs_init(void);
+
+
+#endif /* CBE_REGS_H */
diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h
new file mode 100644
index 00000000000..7cdf358337c
--- /dev/null
+++ b/arch/powerpc/include/asm/checksum.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_CHECKSUM_H
+#define _ASM_POWERPC_CHECKSUM_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.  ihl is the number
+ * of 32-bit words and is always >= 5.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum);
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * Computes the checksum of a memory block at src, length len,
+ * and adds in "sum" (32-bit), while copying the block to dst.
+ * If an access exception occurs on src or dst, it stores -EFAULT
+ * to *src_err or *dst_err respectively (if that pointer is not
+ * NULL), and, for an error on src, zeroes the rest of dst.
+ *
+ * Like csum_partial, this must be called with even lengths,
+ * except for the last fragment.
+ */
+extern __wsum csum_partial_copy_generic(const void *src, void *dst,
+					      int len, __wsum sum,
+					      int *src_err, int *dst_err);
+/*
+ * the same as csum_partial, but copies from src to dst while it
+ * checksums.
+ */
+#define csum_partial_copy_from_user(src, dst, len, sum, errp)   \
+        csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL)
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)   \
+        csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
+
+
+/*
+ * turns a 32-bit partial checksum (e.g. from csum_partial) into a
+ * 1's complement 16-bit checksum.
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	/* swap the two 16-bit halves of sum */
+	__asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum));
+	/* if there is a carry from adding the two 16-bit halves,
+	   it will carry from the lower half into the upper half,
+	   giving us the correct sum in the upper half. */
+	return (__force __sum16)(~((__force u32)sum + tmp) >> 16);
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+                                     unsigned short len,
+                                     unsigned short proto,
+                                     __wsum sum)
+{
+#ifdef __powerpc64__
+	unsigned long s = (__force u32)sum;
+
+	s += (__force u32)saddr;
+	s += (__force u32)daddr;
+	s += proto + len;
+	s += (s >> 32);
+	return (__force __wsum) s;
+#else
+    __asm__("\n\
+	addc %0,%0,%1 \n\
+	adde %0,%0,%2 \n\
+	adde %0,%0,%3 \n\
+	addze %0,%0 \n\
+	"
+	: "=r" (sum)
+	: "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum));
+	return sum;
+#endif
+}
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h
new file mode 100644
index 00000000000..ab1882c1e17
--- /dev/null
+++ b/arch/powerpc/include/asm/clk_interface.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_POWERPC_CLK_INTERFACE_H
+#define __ASM_POWERPC_CLK_INTERFACE_H
+
+#include <linux/clk.h>
+
+struct clk_interface {
+	struct clk*	(*clk_get)	(struct device *dev, const char *id);
+	int		(*clk_enable)	(struct clk *clk);
+	void		(*clk_disable)	(struct clk *clk);
+	unsigned long	(*clk_get_rate)	(struct clk *clk);
+	void		(*clk_put)	(struct clk *clk);
+	long		(*clk_round_rate) (struct clk *clk, unsigned long rate);
+	int 		(*clk_set_rate)	(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent) (struct clk *clk, struct clk *parent);
+	struct clk*	(*clk_get_parent) (struct clk *clk);
+};
+
+extern struct clk_interface clk_functions;
+
+#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
new file mode 100644
index 00000000000..107d9b915e3
--- /dev/null
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_POWERPC_CODE_PATCHING_H
+#define _ASM_POWERPC_CODE_PATCHING_H
+
+/*
+ * Copyright 2008, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+
+#define PPC_NOP_INSTR		0x60000000
+#define PPC_LWSYNC_INSTR	0x7c2004ac
+
+/* Flags for create_branch:
+ * "b"   == create_branch(addr, target, 0);
+ * "ba"  == create_branch(addr, target, BRANCH_ABSOLUTE);
+ * "bl"  == create_branch(addr, target, BRANCH_SET_LINK);
+ * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK);
+ */
+#define BRANCH_SET_LINK	0x1
+#define BRANCH_ABSOLUTE	0x2
+
+unsigned int create_branch(const unsigned int *addr,
+			   unsigned long target, int flags);
+unsigned int create_cond_branch(const unsigned int *addr,
+				unsigned long target, int flags);
+void patch_branch(unsigned int *addr, unsigned long target, int flags);
+void patch_instruction(unsigned int *addr, unsigned int instr);
+
+int instr_is_relative_branch(unsigned int instr);
+int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr);
+unsigned long branch_target(const unsigned int *instr);
+unsigned int translate_branch(const unsigned int *dest,
+			      const unsigned int *src);
+
+static inline unsigned long ppc_function_entry(void *func)
+{
+#ifdef CONFIG_PPC64
+	/*
+	 * On PPC64 the function pointer actually points to the function's
+	 * descriptor. The first entry in the descriptor is the address
+	 * of the function text.
+	 */
+	return ((func_descr_t *)func)->entry;
+#else
+	return (unsigned long)func;
+#endif
+}
+
+#endif /* _ASM_POWERPC_CODE_PATCHING_H */
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
new file mode 100644
index 00000000000..d811a8cd7b5
--- /dev/null
+++ b/arch/powerpc/include/asm/compat.h
@@ -0,0 +1,214 @@
+#ifndef _ASM_POWERPC_COMPAT_H
+#define _ASM_POWERPC_COMPAT_H
+#ifdef __KERNEL__
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u32		__compat_uid_t;
+typedef u32		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u32		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid32_t	st_uid;
+	__compat_gid32_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	compat_time_t	st_atime;
+	u32		st_atime_nsec;
+	compat_time_t	st_mtime;
+	u32		st_mtime_nsec;
+	compat_time_t	st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4[2];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current->thread.regs;
+	unsigned long usp = regs->gpr[1];
+
+	/*
+	 * We cant access below the stack pointer in the 32bit ABI and
+	 * can access 288 bytes in the 64bit ABI
+	 */
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp -= 288;
+
+	return (void __user *) (usp - len);
+}
+
+/*
+ * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
+ * it we may as well define it.
+ */
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid_t uid;
+	__compat_gid_t gid;
+	__compat_uid_t cuid;
+	__compat_gid_t cgid;
+	compat_mode_t mode;
+	unsigned int seq;
+	unsigned int __pad2;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int __unused1;
+	compat_time_t sem_otime;
+	unsigned int __unused2;
+	compat_time_t sem_ctime;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int __unused1;
+	compat_time_t msg_stime;
+	unsigned int __unused2;
+	compat_time_t msg_rtime;
+	unsigned int __unused3;
+	compat_time_t msg_ctime;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t msg_lspid;
+	compat_pid_t msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int __unused1;
+	compat_time_t shm_atime;
+	unsigned int __unused2;
+	compat_time_t shm_dtime;
+	unsigned int __unused3;
+	compat_time_t shm_ctime;
+	unsigned int __unused4;
+	compat_size_t shm_segsz;
+	compat_pid_t shm_cpid;
+	compat_pid_t shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused5;
+	compat_ulong_t __unused6;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_COMPAT_H */
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
new file mode 100644
index 00000000000..24d79e3abd8
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm.h
@@ -0,0 +1,106 @@
+#ifndef __CPM_H
+#define __CPM_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/of.h>
+
+/* Opcodes common to CPM1 and CPM2
+*/
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_SET_TIMER	((ushort)0x0008)
+#define CPM_CR_STOP_IDMA	((ushort)0x000b)
+
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+
+/* Buffer descriptor control/status used by serial
+ */
+
+#define BD_SC_EMPTY	(0x8000)	/* Receive is empty */
+#define BD_SC_READY	(0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	(0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
+#define BD_SC_TC	(0x0400)	/* Transmit CRC */
+#define BD_SC_CM	(0x0200)	/* Continous mode */
+#define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		(0x0100)	/* xmt preamble */
+#define BD_SC_BR	(0x0020)	/* Break received */
+#define BD_SC_FR	(0x0010)	/* Framing error */
+#define BD_SC_PR	(0x0008)	/* Parity error */
+#define BD_SC_NAK	(0x0004)	/* NAK - did not respond */
+#define BD_SC_OV	(0x0002)	/* Overrun */
+#define BD_SC_UN	(0x0002)	/* Underrun */
+#define BD_SC_CD	(0x0001)	/* */
+#define BD_SC_CL	(0x0001)	/* Collision */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY	(0x8000)
+#define BD_ENET_RX_WRAP		(0x2000)
+#define BD_ENET_RX_INTR		(0x1000)
+#define BD_ENET_RX_LAST		(0x0800)
+#define BD_ENET_RX_FIRST	(0x0400)
+#define BD_ENET_RX_MISS		(0x0100)
+#define BD_ENET_RX_BC		(0x0080)	/* FCC Only */
+#define BD_ENET_RX_MC		(0x0040)	/* FCC Only */
+#define BD_ENET_RX_LG		(0x0020)
+#define BD_ENET_RX_NO		(0x0010)
+#define BD_ENET_RX_SH		(0x0008)
+#define BD_ENET_RX_CR		(0x0004)
+#define BD_ENET_RX_OV		(0x0002)
+#define BD_ENET_RX_CL		(0x0001)
+#define BD_ENET_RX_STATS	(0x01ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY	(0x8000)
+#define BD_ENET_TX_PAD		(0x4000)
+#define BD_ENET_TX_WRAP		(0x2000)
+#define BD_ENET_TX_INTR		(0x1000)
+#define BD_ENET_TX_LAST		(0x0800)
+#define BD_ENET_TX_TC		(0x0400)
+#define BD_ENET_TX_DEF		(0x0200)
+#define BD_ENET_TX_HB		(0x0100)
+#define BD_ENET_TX_LC		(0x0080)
+#define BD_ENET_TX_RL		(0x0040)
+#define BD_ENET_TX_RCMASK	(0x003c)
+#define BD_ENET_TX_UN		(0x0002)
+#define BD_ENET_TX_CSL		(0x0001)
+#define BD_ENET_TX_STATS	(0x03ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Transparent mode SCC.
+ */
+#define BD_SCC_TX_LAST		(0x0800)
+
+/* Buffer descriptor control/status used by I2C.
+ */
+#define BD_I2C_START		(0x0400)
+
+int cpm_muram_init(void);
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(unsigned long offset);
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *cpm_muram_addr(unsigned long offset);
+unsigned long cpm_muram_offset(void __iomem *addr);
+dma_addr_t cpm_muram_dma(void __iomem *addr);
+int cpm_command(u32 command, u8 opcode);
+
+int cpm2_gpiochip_add32(struct device_node *np);
+
+#endif
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
new file mode 100644
index 00000000000..2ff798744c1
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -0,0 +1,652 @@
+/*
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * throught the MPC8xx internal memory map.  See immap.h for details.
+ * This file only contains what I need for the moment, not the total
+ * CPM capabilities.  I (or someone else) will add definitions as they
+ * are needed.  -- Dan
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM1__
+#define __CPM1__
+
+#include <asm/8xx_immap.h>
+#include <asm/ptrace.h>
+#include <asm/cpm.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* Channel numbers.
+*/
+#define CPM_CR_CH_SCC1		((ushort)0x0000)
+#define CPM_CR_CH_I2C		((ushort)0x0001)	/* I2C and IDMA1 */
+#define CPM_CR_CH_SCC2		((ushort)0x0004)
+#define CPM_CR_CH_SPI		((ushort)0x0005)	/* SPI / IDMA2 / Timers */
+#define CPM_CR_CH_TIMER		CPM_CR_CH_SPI
+#define CPM_CR_CH_SCC3		((ushort)0x0008)
+#define CPM_CR_CH_SMC1		((ushort)0x0009)	/* SMC1 / DSP1 */
+#define CPM_CR_CH_SCC4		((ushort)0x000c)
+#define CPM_CR_CH_SMC2		((ushort)0x000d)	/* SMC2 / DSP2 */
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
+
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#define cpm_dpram_phys cpm_muram_dma
+
+extern void cpm_setbrg(uint brg, uint rate);
+
+extern void cpm_load_patch(cpm8xx_t *cp);
+
+extern void cpm_reset(void);
+
+/* Parameter RAM offsets.
+*/
+#define PROFF_SCC1	((uint)0x0000)
+#define PROFF_IIC	((uint)0x0080)
+#define PROFF_SCC2	((uint)0x0100)
+#define PROFF_SPI	((uint)0x0180)
+#define PROFF_SCC3	((uint)0x0200)
+#define PROFF_SMC1	((uint)0x0280)
+#define PROFF_SCC4	((uint)0x0300)
+#define PROFF_SMC2	((uint)0x0380)
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+	char	res1[8];	/* Reserved */
+	ushort	smc_rpbase;	/* Relocation pointer */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SI Clock Route Register
+*/
+#define SICR_RCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_TCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_RCLK_SCC2_BRG2	((uint)0x00000800)
+#define SICR_TCLK_SCC2_BRG2	((uint)0x00000100)
+#define SICR_RCLK_SCC3_BRG3	((uint)0x00100000)
+#define SICR_TCLK_SCC3_BRG3	((uint)0x00020000)
+#define SICR_RCLK_SCC4_BRG4	((uint)0x18000000)
+#define SICR_TCLK_SCC4_BRG4	((uint)0x03000000)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_QMC	((uint)0x0000000a)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* CPM Ethernet through SCCx.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	char	res1[8];	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+	char	res1[4];	/* Reserved */
+	ushort	iic_rpbase;	/* Relocation pointer */
+	char	res2[2];	/* Reserved */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;
+	ushort	spi_rpbase;	/* Relocation pointer */
+	ushort	spi_res2;
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_LEN4	((ushort)0x0030)	/*  4 bits per char */
+#define SPMODE_LEN8	((ushort)0x0070)	/*  8 bits per char */
+#define SPMODE_LEN16	((ushort)0x00f0)	/* 16 bits per char */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+/* SPIE fields */
+#define SPIE_MME	0x20
+#define SPIE_TXE	0x10
+#define SPIE_BSY	0x04
+#define SPIE_TXB	0x02
+#define SPIE_RXB	0x01
+
+/*
+ * RISC Controller Configuration Register definitons
+ */
+#define RCCR_TIME	0x8000			/* RISC Timer Enable */
+#define RCCR_TIMEP(t)	(((t) & 0x3F)<<8)	/* RISC Timer Period */
+#define RCCR_TIME_MASK	0x00FF			/* not RISC Timer related bits */
+
+/* RISC Timer Parameter RAM offset */
+#define PROFF_RTMR	((uint)0x01B0)
+
+typedef struct risc_timer_pram {
+	unsigned short	tm_base;	/* RISC Timer Table Base Address */
+	unsigned short	tm_ptr;		/* RISC Timer Table Pointer (internal) */
+	unsigned short	r_tmr;		/* RISC Timer Mode Register */
+	unsigned short	r_tmv;		/* RISC Timer Valid Register */
+	unsigned long	tm_cmd;		/* RISC Timer Command Register */
+	unsigned long	tm_cnt;		/* RISC Timer Internal Count */
+} rt_pram_t;
+
+/* Bits in RISC Timer Command Register */
+#define TM_CMD_VALID	0x80000000	/* Valid - Enables the timer */
+#define TM_CMD_RESTART	0x40000000	/* Restart - for automatic restart */
+#define TM_CMD_PWM	0x20000000	/* Run in Pulse Width Modulation Mode */
+#define TM_CMD_NUM(n)	(((n)&0xF)<<16)	/* Timer Number */
+#define TM_CMD_PERIOD(p) ((p)&0xFFFF)	/* Timer Period */
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+#define CPMVEC_NR		32
+#define	CPMVEC_PIO_PC15		((ushort)0x1f)
+#define	CPMVEC_SCC1		((ushort)0x1e)
+#define	CPMVEC_SCC2		((ushort)0x1d)
+#define	CPMVEC_SCC3		((ushort)0x1c)
+#define	CPMVEC_SCC4		((ushort)0x1b)
+#define	CPMVEC_PIO_PC14		((ushort)0x1a)
+#define	CPMVEC_TIMER1		((ushort)0x19)
+#define	CPMVEC_PIO_PC13		((ushort)0x18)
+#define	CPMVEC_PIO_PC12		((ushort)0x17)
+#define	CPMVEC_SDMA_CB_ERR	((ushort)0x16)
+#define CPMVEC_IDMA1		((ushort)0x15)
+#define CPMVEC_IDMA2		((ushort)0x14)
+#define CPMVEC_TIMER2		((ushort)0x12)
+#define CPMVEC_RISCTIMER	((ushort)0x11)
+#define CPMVEC_I2C		((ushort)0x10)
+#define	CPMVEC_PIO_PC11		((ushort)0x0f)
+#define	CPMVEC_PIO_PC10		((ushort)0x0e)
+#define CPMVEC_TIMER3		((ushort)0x0c)
+#define	CPMVEC_PIO_PC9		((ushort)0x0b)
+#define	CPMVEC_PIO_PC8		((ushort)0x0a)
+#define	CPMVEC_PIO_PC7		((ushort)0x09)
+#define CPMVEC_TIMER4		((ushort)0x07)
+#define	CPMVEC_PIO_PC6		((ushort)0x06)
+#define	CPMVEC_SPI		((ushort)0x05)
+#define	CPMVEC_SMC1		((ushort)0x04)
+#define	CPMVEC_SMC2		((ushort)0x03)
+#define	CPMVEC_PIO_PC5		((ushort)0x02)
+#define	CPMVEC_PIO_PC4		((ushort)0x01)
+#define	CPMVEC_ERROR		((ushort)0x00)
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+
+#define IMAP_ADDR		(get_immrbase())
+
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+enum cpm_port {
+	CPM_PORTA,
+	CPM_PORTB,
+	CPM_PORTC,
+	CPM_PORTD,
+	CPM_PORTE,
+};
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags);
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_SMC1,
+	CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+};
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
+
+#endif /* __CPM1__ */
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
new file mode 100644
index 00000000000..0f5e8ff59a8
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -0,0 +1,1200 @@
+/*
+ * Communication Processor Module v2.
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the CPM2 internal
+ * memory map.  See immap_cpm2.h for details.
+ */
+#ifdef __KERNEL__
+#ifndef __CPM2__
+#define __CPM2__
+
+#include <asm/immap_cpm2.h>
+#include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
+
+#ifdef CONFIG_PPC_85xx
+#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
+#endif
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((uint)0x80000000)
+#define CPM_CR_PAGE	((uint)0x7c000000)
+#define CPM_CR_SBLOCK	((uint)0x03e00000)
+#define CPM_CR_FLG	((uint)0x00010000)
+#define CPM_CR_MCN	((uint)0x00003fc0)
+#define CPM_CR_OPCODE	((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK	(0x04)
+#define CPM_CR_SCC2_SBLOCK	(0x05)
+#define CPM_CR_SCC3_SBLOCK	(0x06)
+#define CPM_CR_SCC4_SBLOCK	(0x07)
+#define CPM_CR_SMC1_SBLOCK	(0x08)
+#define CPM_CR_SMC2_SBLOCK	(0x09)
+#define CPM_CR_SPI_SBLOCK	(0x0a)
+#define CPM_CR_I2C_SBLOCK	(0x0b)
+#define CPM_CR_TIMER_SBLOCK	(0x0f)
+#define CPM_CR_RAND_SBLOCK	(0x0e)
+#define CPM_CR_FCC1_SBLOCK	(0x10)
+#define CPM_CR_FCC2_SBLOCK	(0x11)
+#define CPM_CR_FCC3_SBLOCK	(0x12)
+#define CPM_CR_IDMA1_SBLOCK	(0x14)
+#define CPM_CR_IDMA2_SBLOCK	(0x15)
+#define CPM_CR_IDMA3_SBLOCK	(0x16)
+#define CPM_CR_IDMA4_SBLOCK	(0x17)
+#define CPM_CR_MCC1_SBLOCK	(0x1c)
+
+#define CPM_CR_FCC_SBLOCK(x)	(x + 0x10)
+
+#define CPM_CR_SCC1_PAGE	(0x00)
+#define CPM_CR_SCC2_PAGE	(0x01)
+#define CPM_CR_SCC3_PAGE	(0x02)
+#define CPM_CR_SCC4_PAGE	(0x03)
+#define CPM_CR_SMC1_PAGE	(0x07)
+#define CPM_CR_SMC2_PAGE	(0x08)
+#define CPM_CR_SPI_PAGE		(0x09)
+#define CPM_CR_I2C_PAGE		(0x0a)
+#define CPM_CR_TIMER_PAGE	(0x0a)
+#define CPM_CR_RAND_PAGE	(0x0a)
+#define CPM_CR_FCC1_PAGE	(0x04)
+#define CPM_CR_FCC2_PAGE	(0x05)
+#define CPM_CR_FCC3_PAGE	(0x06)
+#define CPM_CR_IDMA1_PAGE	(0x07)
+#define CPM_CR_IDMA2_PAGE	(0x08)
+#define CPM_CR_IDMA3_PAGE	(0x09)
+#define CPM_CR_IDMA4_PAGE	(0x0a)
+#define CPM_CR_MCC1_PAGE	(0x07)
+#define CPM_CR_MCC2_PAGE	(0x08)
+
+#define CPM_CR_FCC_PAGE(x)	(x + 0x04)
+
+/* CPM2-specific opcodes (see cpm.h for common opcodes)
+*/
+#define CPM_CR_START_IDMA	((ushort)0x0009)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+/* The number of pages of host memory we allocate for CPM.  This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES	2
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
+
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+
+extern void cpm2_reset(void);
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK	(get_brgfreq())
+#define CPM2_BRG_UART_CLK	(CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
+#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
+#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
+#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
+#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#define PROFF_SCC1		((uint)0x8000)
+#define PROFF_SCC2		((uint)0x8100)
+#define PROFF_SCC3		((uint)0x8200)
+#define PROFF_SCC4		((uint)0x8300)
+#define PROFF_FCC1		((uint)0x8400)
+#define PROFF_FCC2		((uint)0x8500)
+#define PROFF_FCC3		((uint)0x8600)
+#define PROFF_MCC1		((uint)0x8700)
+#define PROFF_SMC1_BASE		((uint)0x87fc)
+#define PROFF_IDMA1_BASE	((uint)0x87fe)
+#define PROFF_MCC2		((uint)0x8800)
+#define PROFF_SMC2_BASE		((uint)0x88fc)
+#define PROFF_IDMA2_BASE	((uint)0x88fe)
+#define PROFF_SPI_BASE		((uint)0x89fc)
+#define PROFF_IDMA3_BASE	((uint)0x89fe)
+#define PROFF_TIMERS		((uint)0x8ae0)
+#define PROFF_REVNUM		((uint)0x8af0)
+#define PROFF_RAND		((uint)0x8af8)
+#define PROFF_I2C_BASE		((uint)0x8afc)
+#define PROFF_IDMA4_BASE	((uint)0x8afe)
+
+#define PROFF_SCC_SIZE		((uint)0x100)
+#define PROFF_FCC_SIZE		((uint)0x100)
+#define PROFF_SMC_SIZE		((uint)64)
+
+/* The SMCs are relocated to any of the first eight DPRAM pages.
+ * We will fix these at the first locations of DPRAM, until we
+ * get some microcode patches :-).
+ * The parameter ram space for the SMCs is fifty-some bytes, and
+ * they are required to start on a 64 byte boundary.
+ */
+#define PROFF_SMC1	(0)
+#define PROFF_SMC2	(64)
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+	uint	smc_stmp;	/* SDMA Temp */
+} smc_uart_t;
+
+/* SMC uart mode register (Internal memory map).
+*/
+#define SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
+#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
+#define SMCM_TXE	((unsigned char)0x10)
+#define SMCM_BSY	((unsigned char)0x04)
+#define SMCM_TX		((unsigned char)0x02)
+#define SMCM_RX		((unsigned char)0x01)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE	((unsigned char)0x10)
+#define SCCM_BSY	((unsigned char)0x04)
+#define SCCM_TX		((unsigned char)0x02)
+#define SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB	((u_char) 0x10)	/* Set big endian byte order */
+#define SCC_GBL	((u_char) 0x20) /* Snooping enabled */
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM	((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE	((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE	((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE	((uint)0xc0000000)
+#define FCC_GFMR_TCI		((uint)0x20000000)
+#define FCC_GFMR_TRX		((uint)0x10000000)
+#define FCC_GFMR_TTX		((uint)0x08000000)
+#define FCC_GFMR_TTX		((uint)0x08000000)
+#define FCC_GFMR_CDP		((uint)0x04000000)
+#define FCC_GFMR_CTSP		((uint)0x02000000)
+#define FCC_GFMR_CDS		((uint)0x01000000)
+#define FCC_GFMR_CTSS		((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE	((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO	((uint)0x00004000)
+#define FCC_GFMR_SYNL_8		((uint)0x00008000)
+#define FCC_GFMR_SYNL_16	((uint)0x0000c000)
+#define FCC_GFMR_RTSM		((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ	((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI	((uint)0x00000800)
+#define FCC_GFMR_REVD		((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ	((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI	((uint)0x00000100)
+#define FCC_GFMR_TCRC_16	((uint)0x00000000)
+#define FCC_GFMR_TCRC_32	((uint)0x00000080)
+#define FCC_GFMR_ENR		((uint)0x00000020)
+#define FCC_GFMR_ENT		((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET	((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM	((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC	((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+	ushort	fcc_riptr;	/* Rx Internal temp pointer */
+	ushort	fcc_tiptr;	/* Tx Internal temp pointer */
+	ushort	fcc_res1;
+	ushort	fcc_mrblr;	/* Max receive buffer length, mod 32 bytes */
+	uint	fcc_rstate;	/* Upper byte is Func code, must be set */
+	uint	fcc_rbase;	/* Receive BD base */
+	ushort	fcc_rbdstat;	/* RxBD status */
+	ushort	fcc_rbdlen;	/* RxBD down counter */
+	uint	fcc_rdptr;	/* RxBD internal data pointer */
+	uint	fcc_tstate;	/* Upper byte is Func code, must be set */
+	uint	fcc_tbase;	/* Transmit BD base */
+	ushort	fcc_tbdstat;	/* TxBD status */
+	ushort	fcc_tbdlen;	/* TxBD down counter */
+	uint	fcc_tdptr;	/* TxBD internal data pointer */
+	uint	fcc_rbptr;	/* Rx BD Internal buf pointer */
+	uint	fcc_tbptr;	/* Tx BD Internal buf pointer */
+	uint	fcc_rcrc;	/* Rx temp CRC */
+	uint	fcc_res2;
+	uint	fcc_tcrc;	/* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+	fccp_t	fen_genfcc;
+	uint	fen_statbuf;	/* Internal status buffer */
+	uint	fen_camptr;	/* CAM address */
+	uint	fen_cmask;	/* Constant mask for CRC */
+	uint	fen_cpres;	/* Preset CRC */
+	uint	fen_crcec;	/* CRC Error counter */
+	uint	fen_alec;	/* alignment error counter */
+	uint	fen_disfc;	/* discard frame counter */
+	ushort	fen_retlim;	/* Retry limit */
+	ushort	fen_retcnt;	/* Retry counter */
+	ushort	fen_pper;	/* Persistence */
+	ushort	fen_boffcnt;	/* backoff counter */
+	uint	fen_gaddrh;	/* Group address filter, high 32-bits */
+	uint	fen_gaddrl;	/* Group address filter, low 32-bits */
+	ushort	fen_tfcstat;	/* out of sequence TxBD */
+	ushort	fen_tfclen;
+	uint	fen_tfcptr;
+	ushort	fen_mflr;	/* Maximum frame length (1518) */
+	ushort	fen_paddrh;	/* MAC address */
+	ushort	fen_paddrm;
+	ushort	fen_paddrl;
+	ushort	fen_ibdcount;	/* Internal BD counter */
+	ushort	fen_ibdstart;	/* Internal BD start pointer */
+	ushort	fen_ibdend;	/* Internal BD end pointer */
+	ushort	fen_txlen;	/* Internal Tx frame length counter */
+	uint	fen_ibdbase[8]; /* Internal use */
+	uint	fen_iaddrh;	/* Individual address filter */
+	uint	fen_iaddrl;
+	ushort	fen_minflr;	/* Minimum frame length (64) */
+	ushort	fen_taddrh;	/* Filter transfer MAC address */
+	ushort	fen_taddrm;
+	ushort	fen_taddrl;
+	ushort	fen_padptr;	/* Pointer to pad byte buffer */
+	ushort	fen_cftype;	/* control frame type */
+	ushort	fen_cfrange;	/* control frame range */
+	ushort	fen_maxb;	/* maximum BD count */
+	ushort	fen_maxd1;	/* Max DMA1 length (1520) */
+	ushort	fen_maxd2;	/* Max DMA2 length (1520) */
+	ushort	fen_maxd;	/* internal max DMA count */
+	ushort	fen_dmacnt;	/* internal DMA counter */
+	uint	fen_octc;	/* Total octect counter */
+	uint	fen_colc;	/* Total collision counter */
+	uint	fen_broc;	/* Total broadcast packet counter */
+	uint	fen_mulc;	/* Total multicast packet count */
+	uint	fen_uspc;	/* Total packets < 64 bytes */
+	uint	fen_frgc;	/* Total packets < 64 bytes with errors */
+	uint	fen_ospc;	/* Total packets > 1518 */
+	uint	fen_jbrc;	/* Total packets > 1518 with errors */
+	uint	fen_p64c;	/* Total packets == 64 bytes */
+	uint	fen_p65c;	/* Total packets 64 < bytes <= 127 */
+	uint	fen_p128c;	/* Total packets 127 < bytes <= 255 */
+	uint	fen_p256c;	/* Total packets 256 < bytes <= 511 */
+	uint	fen_p512c;	/* Total packets 512 < bytes <= 1023 */
+	uint	fen_p1024c;	/* Total packets 1024 < bytes <= 1518 */
+	uint	fen_cambuf;	/* Internal CAM buffer poiner */
+	ushort	fen_rfthr;	/* Received frames threshold */
+	ushort	fen_rfcnt;	/* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define FCC_ENET_RXC	((ushort)0x0040)	/* Control Frame Received */
+#define FCC_ENET_TXC	((ushort)0x0020)	/* Out of seq. Tx sent */
+#define FCC_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define FCC_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define FCC_ENET_BSY	((ushort)0x0004)	/* Busy.  Rx Frame dropped */
+#define FCC_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define FCC_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC	((uint)0x80000000)	/* Enable heartbeat */
+#define FCC_PSMR_FC	((uint)0x40000000)	/* Force Collision */
+#define FCC_PSMR_SBT	((uint)0x20000000)	/* Stop backoff timer */
+#define FCC_PSMR_LPB	((uint)0x10000000)	/* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW	((uint)0x08000000)	/* Late collision select */
+#define FCC_PSMR_FDE	((uint)0x04000000)	/* Full Duplex Enable */
+#define FCC_PSMR_MON	((uint)0x02000000)	/* RMON Enable */
+#define FCC_PSMR_PRO	((uint)0x00400000)	/* Promiscuous Enable */
+#define FCC_PSMR_FCE	((uint)0x00200000)	/* Flow Control Enable */
+#define FCC_PSMR_RSH	((uint)0x00100000)	/* Receive Short Frames */
+#define FCC_PSMR_CAM	((uint)0x00000400)	/* CAM enable */
+#define FCC_PSMR_BRO	((uint)0x00000200)	/* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC	((uint)0x00000080)	/* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;	/* Tx temp. */
+	uint	spi_res1[4];	/* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+#define SPMODE_LEN(x)	((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x)	((x) &0xF)
+
+#define SPI_EB		((u_char)0x10)		/* big endian byte order */
+
+/* IDMA parameter RAM
+*/
+typedef struct idma {
+	ushort ibase;		/* IDMA buffer descriptor table base address */
+	ushort dcm;		/* DMA channel mode */
+	ushort ibdptr;		/* IDMA current buffer descriptor pointer */
+	ushort dpr_buf;		/* IDMA transfer buffer base address */
+	ushort buf_inv;		/* internal buffer inventory */
+	ushort ss_max;		/* steady-state maximum transfer size */
+	ushort dpr_in_ptr;	/* write pointer inside the internal buffer */
+	ushort sts;		/* source transfer size */
+	ushort dpr_out_ptr;	/* read pointer inside the internal buffer */
+	ushort seob;		/* source end of burst */
+	ushort deob;		/* destination end of burst */
+	ushort dts;		/* destination transfer size */
+	ushort ret_add;		/* return address when working in ERM=1 mode */
+	ushort res0;		/* reserved */
+	uint   bd_cnt;		/* internal byte count */
+	uint   s_ptr;		/* source internal data pointer */
+	uint   d_ptr;		/* destination internal data pointer */
+	uint   istate;		/* internal state */
+	u_char res1[20];	/* pad to 64-byte length */
+} idma_t;
+
+/* DMA channel mode bit fields
+*/
+#define IDMA_DCM_FB		((ushort)0x8000) /* fly-by mode */
+#define IDMA_DCM_LP		((ushort)0x4000) /* low priority */
+#define IDMA_DCM_TC2		((ushort)0x0400) /* value driven on TC[2] */
+#define IDMA_DCM_DMA_WRAP_MASK	((ushort)0x01c0) /* mask for DMA wrap */
+#define IDMA_DCM_DMA_WRAP_64	((ushort)0x0000) /* 64-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_128	((ushort)0x0040) /* 128-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_256	((ushort)0x0080) /* 256-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_512	((ushort)0x00c0) /* 512-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_1024	((ushort)0x0100) /* 1024-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_2048	((ushort)0x0140) /* 2048-byte DMA xfer buffer */
+#define IDMA_DCM_SINC		((ushort)0x0020) /* source inc addr */
+#define IDMA_DCM_DINC		((ushort)0x0010) /* destination inc addr */
+#define IDMA_DCM_ERM		((ushort)0x0008) /* external request mode */
+#define IDMA_DCM_DT		((ushort)0x0004) /* DONE treatment */
+#define IDMA_DCM_SD_MASK	((ushort)0x0003) /* mask for SD bit field */
+#define IDMA_DCM_SD_MEM2MEM	((ushort)0x0000) /* memory-to-memory xfer */
+#define IDMA_DCM_SD_PER2MEM	((ushort)0x0002) /* peripheral-to-memory xfer */
+#define IDMA_DCM_SD_MEM2PER	((ushort)0x0001) /* memory-to-peripheral xfer */
+
+/* IDMA Buffer Descriptors
+*/
+typedef struct idma_bd {
+	uint flags;
+	uint len;	/* data length */
+	uint src;	/* source data buffer pointer */
+	uint dst;	/* destination data buffer pointer */
+} idma_bd_t;
+
+/* IDMA buffer descriptor flag bit fields
+*/
+#define IDMA_BD_V	((uint)0x80000000)	/* valid */
+#define IDMA_BD_W	((uint)0x20000000)	/* wrap */
+#define IDMA_BD_I	((uint)0x10000000)	/* interrupt */
+#define IDMA_BD_L	((uint)0x08000000)	/* last */
+#define IDMA_BD_CM	((uint)0x02000000)	/* continuous mode */
+#define IDMA_BD_SDN	((uint)0x00400000)	/* source done */
+#define IDMA_BD_DDN	((uint)0x00200000)	/* destination done */
+#define IDMA_BD_DGBL	((uint)0x00100000)	/* destination global */
+#define IDMA_BD_DBO_LE	((uint)0x00040000)	/* little-end dest byte order */
+#define IDMA_BD_DBO_BE	((uint)0x00080000)	/* big-end dest byte order */
+#define IDMA_BD_DDTB	((uint)0x00010000)	/* destination data bus */
+#define IDMA_BD_SGBL	((uint)0x00002000)	/* source global */
+#define IDMA_BD_SBO_LE	((uint)0x00000800)	/* little-end src byte order */
+#define IDMA_BD_SBO_BE	((uint)0x00001000)	/* big-end src byte order */
+#define IDMA_BD_SDTB	((uint)0x00000200)	/* source data bus */
+
+/* per-channel IDMA registers
+*/
+typedef struct im_idma {
+	u_char idsr;			/* IDMAn event status register */
+	u_char res0[3];
+	u_char idmr;			/* IDMAn event mask register */
+	u_char res1[3];
+} im_idma_t;
+
+/* IDMA event register bit fields
+*/
+#define IDMA_EVENT_SC	((unsigned char)0x08)	/* stop completed */
+#define IDMA_EVENT_OB	((unsigned char)0x04)	/* out of buffers */
+#define IDMA_EVENT_EDN	((unsigned char)0x02)	/* external DONE asserted */
+#define IDMA_EVENT_BC	((unsigned char)0x01)	/* buffer descriptor complete */
+
+/* RISC Controller Configuration Register (RCCR) bit fields
+*/
+#define RCCR_TIME	((uint)0x80000000) /* timer enable */
+#define RCCR_TIMEP_MASK	((uint)0x3f000000) /* mask for timer period bit field */
+#define RCCR_DR0M	((uint)0x00800000) /* IDMA0 request mode */
+#define RCCR_DR1M	((uint)0x00400000) /* IDMA1 request mode */
+#define RCCR_DR2M	((uint)0x00000080) /* IDMA2 request mode */
+#define RCCR_DR3M	((uint)0x00000040) /* IDMA3 request mode */
+#define RCCR_DR0QP_MASK	((uint)0x00300000) /* mask for IDMA0 req priority */
+#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
+#define RCCR_DR0QP_MED	((uint)0x00100000) /* IDMA0 has medium req priority */
+#define RCCR_DR0QP_LOW	((uint)0x00200000) /* IDMA0 has low req priority */
+#define RCCR_DR1QP_MASK	((uint)0x00030000) /* mask for IDMA1 req priority */
+#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
+#define RCCR_DR1QP_MED	((uint)0x00010000) /* IDMA1 has medium req priority */
+#define RCCR_DR1QP_LOW	((uint)0x00020000) /* IDMA1 has low req priority */
+#define RCCR_DR2QP_MASK	((uint)0x00000030) /* mask for IDMA2 req priority */
+#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
+#define RCCR_DR2QP_MED	((uint)0x00000010) /* IDMA2 has medium req priority */
+#define RCCR_DR2QP_LOW	((uint)0x00000020) /* IDMA2 has low req priority */
+#define RCCR_DR3QP_MASK	((uint)0x00000003) /* mask for IDMA3 req priority */
+#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
+#define RCCR_DR3QP_MED	((uint)0x00000001) /* IDMA3 has medium req priority */
+#define RCCR_DR3QP_LOW	((uint)0x00000002) /* IDMA3 has low req priority */
+#define RCCR_EIE	((uint)0x00080000) /* external interrupt enable */
+#define RCCR_SCD	((uint)0x00040000) /* scheduler configuration */
+#define RCCR_ERAM_MASK	((uint)0x0000e000) /* mask for enable RAM microcode */
+#define RCCR_ERAM_0KB	((uint)0x00000000) /* use 0KB of dpram for microcode */
+#define RCCR_ERAM_2KB	((uint)0x00002000) /* use 2KB of dpram for microcode */
+#define RCCR_ERAM_4KB	((uint)0x00004000) /* use 4KB of dpram for microcode */
+#define RCCR_ERAM_6KB	((uint)0x00006000) /* use 6KB of dpram for microcode */
+#define RCCR_ERAM_8KB	((uint)0x00008000) /* use 8KB of dpram for microcode */
+#define RCCR_ERAM_10KB	((uint)0x0000a000) /* use 10KB of dpram for microcode */
+#define RCCR_ERAM_12KB	((uint)0x0000c000) /* use 12KB of dpram for microcode */
+#define RCCR_EDM0	((uint)0x00000800) /* DREQ0 edge detect mode */
+#define RCCR_EDM1	((uint)0x00000400) /* DREQ1 edge detect mode */
+#define RCCR_EDM2	((uint)0x00000200) /* DREQ2 edge detect mode */
+#define RCCR_EDM3	((uint)0x00000100) /* DREQ3 edge detect mode */
+#define RCCR_DEM01	((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
+#define RCCR_DEM23	((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
+
+/*-----------------------------------------------------------------------
+ * CMXFCR - CMX FCC Clock Route Register
+ */
+#define CMXFCR_FC1         0x40000000   /* FCC1 connection              */
+#define CMXFCR_RF1CS_MSK   0x38000000   /* Receive FCC1 Clock Source Mask */
+#define CMXFCR_TF1CS_MSK   0x07000000   /* Transmit FCC1 Clock Source Mask */
+#define CMXFCR_FC2         0x00400000   /* FCC2 connection              */
+#define CMXFCR_RF2CS_MSK   0x00380000   /* Receive FCC2 Clock Source Mask */
+#define CMXFCR_TF2CS_MSK   0x00070000   /* Transmit FCC2 Clock Source Mask */
+#define CMXFCR_FC3         0x00004000   /* FCC3 connection              */
+#define CMXFCR_RF3CS_MSK   0x00003800   /* Receive FCC3 Clock Source Mask */
+#define CMXFCR_TF3CS_MSK   0x00000700   /* Transmit FCC3 Clock Source Mask */
+
+#define CMXFCR_RF1CS_BRG5  0x00000000   /* Receive FCC1 Clock Source is BRG5 */
+#define CMXFCR_RF1CS_BRG6  0x08000000   /* Receive FCC1 Clock Source is BRG6 */
+#define CMXFCR_RF1CS_BRG7  0x10000000   /* Receive FCC1 Clock Source is BRG7 */
+#define CMXFCR_RF1CS_BRG8  0x18000000   /* Receive FCC1 Clock Source is BRG8 */
+#define CMXFCR_RF1CS_CLK9  0x20000000   /* Receive FCC1 Clock Source is CLK9 */
+#define CMXFCR_RF1CS_CLK10 0x28000000   /* Receive FCC1 Clock Source is CLK10 */
+#define CMXFCR_RF1CS_CLK11 0x30000000   /* Receive FCC1 Clock Source is CLK11 */
+#define CMXFCR_RF1CS_CLK12 0x38000000   /* Receive FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_TF1CS_BRG5  0x00000000   /* Transmit FCC1 Clock Source is BRG5 */
+#define CMXFCR_TF1CS_BRG6  0x01000000   /* Transmit FCC1 Clock Source is BRG6 */
+#define CMXFCR_TF1CS_BRG7  0x02000000   /* Transmit FCC1 Clock Source is BRG7 */
+#define CMXFCR_TF1CS_BRG8  0x03000000   /* Transmit FCC1 Clock Source is BRG8 */
+#define CMXFCR_TF1CS_CLK9  0x04000000   /* Transmit FCC1 Clock Source is CLK9 */
+#define CMXFCR_TF1CS_CLK10 0x05000000   /* Transmit FCC1 Clock Source is CLK10 */
+#define CMXFCR_TF1CS_CLK11 0x06000000   /* Transmit FCC1 Clock Source is CLK11 */
+#define CMXFCR_TF1CS_CLK12 0x07000000   /* Transmit FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_RF2CS_BRG5  0x00000000   /* Receive FCC2 Clock Source is BRG5 */
+#define CMXFCR_RF2CS_BRG6  0x00080000   /* Receive FCC2 Clock Source is BRG6 */
+#define CMXFCR_RF2CS_BRG7  0x00100000   /* Receive FCC2 Clock Source is BRG7 */
+#define CMXFCR_RF2CS_BRG8  0x00180000   /* Receive FCC2 Clock Source is BRG8 */
+#define CMXFCR_RF2CS_CLK13 0x00200000   /* Receive FCC2 Clock Source is CLK13 */
+#define CMXFCR_RF2CS_CLK14 0x00280000   /* Receive FCC2 Clock Source is CLK14 */
+#define CMXFCR_RF2CS_CLK15 0x00300000   /* Receive FCC2 Clock Source is CLK15 */
+#define CMXFCR_RF2CS_CLK16 0x00380000   /* Receive FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_TF2CS_BRG5  0x00000000   /* Transmit FCC2 Clock Source is BRG5 */
+#define CMXFCR_TF2CS_BRG6  0x00010000   /* Transmit FCC2 Clock Source is BRG6 */
+#define CMXFCR_TF2CS_BRG7  0x00020000   /* Transmit FCC2 Clock Source is BRG7 */
+#define CMXFCR_TF2CS_BRG8  0x00030000   /* Transmit FCC2 Clock Source is BRG8 */
+#define CMXFCR_TF2CS_CLK13 0x00040000   /* Transmit FCC2 Clock Source is CLK13 */
+#define CMXFCR_TF2CS_CLK14 0x00050000   /* Transmit FCC2 Clock Source is CLK14 */
+#define CMXFCR_TF2CS_CLK15 0x00060000   /* Transmit FCC2 Clock Source is CLK15 */
+#define CMXFCR_TF2CS_CLK16 0x00070000   /* Transmit FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_RF3CS_BRG5  0x00000000   /* Receive FCC3 Clock Source is BRG5 */
+#define CMXFCR_RF3CS_BRG6  0x00000800   /* Receive FCC3 Clock Source is BRG6 */
+#define CMXFCR_RF3CS_BRG7  0x00001000   /* Receive FCC3 Clock Source is BRG7 */
+#define CMXFCR_RF3CS_BRG8  0x00001800   /* Receive FCC3 Clock Source is BRG8 */
+#define CMXFCR_RF3CS_CLK13 0x00002000   /* Receive FCC3 Clock Source is CLK13 */
+#define CMXFCR_RF3CS_CLK14 0x00002800   /* Receive FCC3 Clock Source is CLK14 */
+#define CMXFCR_RF3CS_CLK15 0x00003000   /* Receive FCC3 Clock Source is CLK15 */
+#define CMXFCR_RF3CS_CLK16 0x00003800   /* Receive FCC3 Clock Source is CLK16 */
+
+#define CMXFCR_TF3CS_BRG5  0x00000000   /* Transmit FCC3 Clock Source is BRG5 */
+#define CMXFCR_TF3CS_BRG6  0x00000100   /* Transmit FCC3 Clock Source is BRG6 */
+#define CMXFCR_TF3CS_BRG7  0x00000200   /* Transmit FCC3 Clock Source is BRG7 */
+#define CMXFCR_TF3CS_BRG8  0x00000300   /* Transmit FCC3 Clock Source is BRG8 */
+#define CMXFCR_TF3CS_CLK13 0x00000400   /* Transmit FCC3 Clock Source is CLK13 */
+#define CMXFCR_TF3CS_CLK14 0x00000500   /* Transmit FCC3 Clock Source is CLK14 */
+#define CMXFCR_TF3CS_CLK15 0x00000600   /* Transmit FCC3 Clock Source is CLK15 */
+#define CMXFCR_TF3CS_CLK16 0x00000700   /* Transmit FCC3 Clock Source is CLK16 */
+
+/*-----------------------------------------------------------------------
+ * CMXSCR - CMX SCC Clock Route Register
+ */
+#define CMXSCR_GR1         0x80000000   /* Grant Support of SCC1        */
+#define CMXSCR_SC1         0x40000000   /* SCC1 connection              */
+#define CMXSCR_RS1CS_MSK   0x38000000   /* Receive SCC1 Clock Source Mask */
+#define CMXSCR_TS1CS_MSK   0x07000000   /* Transmit SCC1 Clock Source Mask */
+#define CMXSCR_GR2         0x00800000   /* Grant Support of SCC2        */
+#define CMXSCR_SC2         0x00400000   /* SCC2 connection              */
+#define CMXSCR_RS2CS_MSK   0x00380000   /* Receive SCC2 Clock Source Mask */
+#define CMXSCR_TS2CS_MSK   0x00070000   /* Transmit SCC2 Clock Source Mask */
+#define CMXSCR_GR3         0x00008000   /* Grant Support of SCC3        */
+#define CMXSCR_SC3         0x00004000   /* SCC3 connection              */
+#define CMXSCR_RS3CS_MSK   0x00003800   /* Receive SCC3 Clock Source Mask */
+#define CMXSCR_TS3CS_MSK   0x00000700   /* Transmit SCC3 Clock Source Mask */
+#define CMXSCR_GR4         0x00000080   /* Grant Support of SCC4        */
+#define CMXSCR_SC4         0x00000040   /* SCC4 connection              */
+#define CMXSCR_RS4CS_MSK   0x00000038   /* Receive SCC4 Clock Source Mask */
+#define CMXSCR_TS4CS_MSK   0x00000007   /* Transmit SCC4 Clock Source Mask */
+
+#define CMXSCR_RS1CS_BRG1  0x00000000   /* SCC1 Rx Clock Source is BRG1 */
+#define CMXSCR_RS1CS_BRG2  0x08000000   /* SCC1 Rx Clock Source is BRG2 */
+#define CMXSCR_RS1CS_BRG3  0x10000000   /* SCC1 Rx Clock Source is BRG3 */
+#define CMXSCR_RS1CS_BRG4  0x18000000   /* SCC1 Rx Clock Source is BRG4 */
+#define CMXSCR_RS1CS_CLK11 0x20000000   /* SCC1 Rx Clock Source is CLK11 */
+#define CMXSCR_RS1CS_CLK12 0x28000000   /* SCC1 Rx Clock Source is CLK12 */
+#define CMXSCR_RS1CS_CLK3  0x30000000   /* SCC1 Rx Clock Source is CLK3 */
+#define CMXSCR_RS1CS_CLK4  0x38000000   /* SCC1 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS1CS_BRG1  0x00000000   /* SCC1 Tx Clock Source is BRG1 */
+#define CMXSCR_TS1CS_BRG2  0x01000000   /* SCC1 Tx Clock Source is BRG2 */
+#define CMXSCR_TS1CS_BRG3  0x02000000   /* SCC1 Tx Clock Source is BRG3 */
+#define CMXSCR_TS1CS_BRG4  0x03000000   /* SCC1 Tx Clock Source is BRG4 */
+#define CMXSCR_TS1CS_CLK11 0x04000000   /* SCC1 Tx Clock Source is CLK11 */
+#define CMXSCR_TS1CS_CLK12 0x05000000   /* SCC1 Tx Clock Source is CLK12 */
+#define CMXSCR_TS1CS_CLK3  0x06000000   /* SCC1 Tx Clock Source is CLK3 */
+#define CMXSCR_TS1CS_CLK4  0x07000000   /* SCC1 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS2CS_BRG1  0x00000000   /* SCC2 Rx Clock Source is BRG1 */
+#define CMXSCR_RS2CS_BRG2  0x00080000   /* SCC2 Rx Clock Source is BRG2 */
+#define CMXSCR_RS2CS_BRG3  0x00100000   /* SCC2 Rx Clock Source is BRG3 */
+#define CMXSCR_RS2CS_BRG4  0x00180000   /* SCC2 Rx Clock Source is BRG4 */
+#define CMXSCR_RS2CS_CLK11 0x00200000   /* SCC2 Rx Clock Source is CLK11 */
+#define CMXSCR_RS2CS_CLK12 0x00280000   /* SCC2 Rx Clock Source is CLK12 */
+#define CMXSCR_RS2CS_CLK3  0x00300000   /* SCC2 Rx Clock Source is CLK3 */
+#define CMXSCR_RS2CS_CLK4  0x00380000   /* SCC2 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS2CS_BRG1  0x00000000   /* SCC2 Tx Clock Source is BRG1 */
+#define CMXSCR_TS2CS_BRG2  0x00010000   /* SCC2 Tx Clock Source is BRG2 */
+#define CMXSCR_TS2CS_BRG3  0x00020000   /* SCC2 Tx Clock Source is BRG3 */
+#define CMXSCR_TS2CS_BRG4  0x00030000   /* SCC2 Tx Clock Source is BRG4 */
+#define CMXSCR_TS2CS_CLK11 0x00040000   /* SCC2 Tx Clock Source is CLK11 */
+#define CMXSCR_TS2CS_CLK12 0x00050000   /* SCC2 Tx Clock Source is CLK12 */
+#define CMXSCR_TS2CS_CLK3  0x00060000   /* SCC2 Tx Clock Source is CLK3 */
+#define CMXSCR_TS2CS_CLK4  0x00070000   /* SCC2 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS3CS_BRG1  0x00000000   /* SCC3 Rx Clock Source is BRG1 */
+#define CMXSCR_RS3CS_BRG2  0x00000800   /* SCC3 Rx Clock Source is BRG2 */
+#define CMXSCR_RS3CS_BRG3  0x00001000   /* SCC3 Rx Clock Source is BRG3 */
+#define CMXSCR_RS3CS_BRG4  0x00001800   /* SCC3 Rx Clock Source is BRG4 */
+#define CMXSCR_RS3CS_CLK5  0x00002000   /* SCC3 Rx Clock Source is CLK5 */
+#define CMXSCR_RS3CS_CLK6  0x00002800   /* SCC3 Rx Clock Source is CLK6 */
+#define CMXSCR_RS3CS_CLK7  0x00003000   /* SCC3 Rx Clock Source is CLK7 */
+#define CMXSCR_RS3CS_CLK8  0x00003800   /* SCC3 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS3CS_BRG1  0x00000000   /* SCC3 Tx Clock Source is BRG1 */
+#define CMXSCR_TS3CS_BRG2  0x00000100   /* SCC3 Tx Clock Source is BRG2 */
+#define CMXSCR_TS3CS_BRG3  0x00000200   /* SCC3 Tx Clock Source is BRG3 */
+#define CMXSCR_TS3CS_BRG4  0x00000300   /* SCC3 Tx Clock Source is BRG4 */
+#define CMXSCR_TS3CS_CLK5  0x00000400   /* SCC3 Tx Clock Source is CLK5 */
+#define CMXSCR_TS3CS_CLK6  0x00000500   /* SCC3 Tx Clock Source is CLK6 */
+#define CMXSCR_TS3CS_CLK7  0x00000600   /* SCC3 Tx Clock Source is CLK7 */
+#define CMXSCR_TS3CS_CLK8  0x00000700   /* SCC3 Tx Clock Source is CLK8 */
+
+#define CMXSCR_RS4CS_BRG1  0x00000000   /* SCC4 Rx Clock Source is BRG1 */
+#define CMXSCR_RS4CS_BRG2  0x00000008   /* SCC4 Rx Clock Source is BRG2 */
+#define CMXSCR_RS4CS_BRG3  0x00000010   /* SCC4 Rx Clock Source is BRG3 */
+#define CMXSCR_RS4CS_BRG4  0x00000018   /* SCC4 Rx Clock Source is BRG4 */
+#define CMXSCR_RS4CS_CLK5  0x00000020   /* SCC4 Rx Clock Source is CLK5 */
+#define CMXSCR_RS4CS_CLK6  0x00000028   /* SCC4 Rx Clock Source is CLK6 */
+#define CMXSCR_RS4CS_CLK7  0x00000030   /* SCC4 Rx Clock Source is CLK7 */
+#define CMXSCR_RS4CS_CLK8  0x00000038   /* SCC4 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS4CS_BRG1  0x00000000   /* SCC4 Tx Clock Source is BRG1 */
+#define CMXSCR_TS4CS_BRG2  0x00000001   /* SCC4 Tx Clock Source is BRG2 */
+#define CMXSCR_TS4CS_BRG3  0x00000002   /* SCC4 Tx Clock Source is BRG3 */
+#define CMXSCR_TS4CS_BRG4  0x00000003   /* SCC4 Tx Clock Source is BRG4 */
+#define CMXSCR_TS4CS_CLK5  0x00000004   /* SCC4 Tx Clock Source is CLK5 */
+#define CMXSCR_TS4CS_CLK6  0x00000005   /* SCC4 Tx Clock Source is CLK6 */
+#define CMXSCR_TS4CS_CLK7  0x00000006   /* SCC4 Tx Clock Source is CLK7 */
+#define CMXSCR_TS4CS_CLK8  0x00000007   /* SCC4 Tx Clock Source is CLK8 */
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration Register				 4-31
+ */
+#define SIUMCR_BBD	0x80000000	/* Bus Busy Disable		*/
+#define SIUMCR_ESE	0x40000000	/* External Snoop Enable	*/
+#define SIUMCR_PBSE	0x20000000	/* Parity Byte Select Enable	*/
+#define SIUMCR_CDIS	0x10000000	/* Core Disable			*/
+#define SIUMCR_DPPC00	0x00000000	/* Data Parity Pins Configuration*/
+#define SIUMCR_DPPC01	0x04000000	/* - " -			*/
+#define SIUMCR_DPPC10	0x08000000	/* - " -			*/
+#define SIUMCR_DPPC11	0x0c000000	/* - " -			*/
+#define SIUMCR_L2CPC00	0x00000000	/* L2 Cache Pins Configuration	*/
+#define SIUMCR_L2CPC01	0x01000000	/* - " -			*/
+#define SIUMCR_L2CPC10	0x02000000	/* - " -			*/
+#define SIUMCR_L2CPC11	0x03000000	/* - " -			*/
+#define SIUMCR_LBPC00	0x00000000	/* Local Bus Pins Configuration	*/
+#define SIUMCR_LBPC01	0x00400000	/* - " -			*/
+#define SIUMCR_LBPC10	0x00800000	/* - " -			*/
+#define SIUMCR_LBPC11	0x00c00000	/* - " -			*/
+#define SIUMCR_APPC00	0x00000000	/* Address Parity Pins Configuration*/
+#define SIUMCR_APPC01	0x00100000	/* - " -			*/
+#define SIUMCR_APPC10	0x00200000	/* - " -			*/
+#define SIUMCR_APPC11	0x00300000	/* - " -			*/
+#define SIUMCR_CS10PC00	0x00000000	/* CS10 Pin Configuration	*/
+#define SIUMCR_CS10PC01	0x00040000	/* - " -			*/
+#define SIUMCR_CS10PC10	0x00080000	/* - " -			*/
+#define SIUMCR_CS10PC11	0x000c0000	/* - " -			*/
+#define SIUMCR_BCTLC00	0x00000000	/* Buffer Control Configuration	*/
+#define SIUMCR_BCTLC01	0x00010000	/* - " -			*/
+#define SIUMCR_BCTLC10	0x00020000	/* - " -			*/
+#define SIUMCR_BCTLC11	0x00030000	/* - " -			*/
+#define SIUMCR_MMR00	0x00000000	/* Mask Masters Requests	*/
+#define SIUMCR_MMR01	0x00004000	/* - " -			*/
+#define SIUMCR_MMR10	0x00008000	/* - " -			*/
+#define SIUMCR_MMR11	0x0000c000	/* - " -			*/
+#define SIUMCR_LPBSE	0x00002000	/* LocalBus Parity Byte Select Enable*/
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control Register					 9-8
+*/
+#define SCCR_PCI_MODE	0x00000100	/* PCI Mode	*/
+#define SCCR_PCI_MODCK	0x00000080	/* Value of PCI_MODCK pin	*/
+#define SCCR_PCIDF_MSK	0x00000078	/* PCI division factor	*/
+#define SCCR_PCIDF_SHIFT 3
+
+#ifndef CPM_IMMR_OFFSET
+#define CPM_IMMR_OFFSET	0x101a8
+#endif
+
+#define FCC_PSMR_RMII	((uint)0x00020000)	/* Use RMII interface */
+
+/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
+ * in order to use clock-computing stuff below for the FCC x
+ */
+
+/* Automatically generates register configurations */
+#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
+
+#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
+#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
+#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
+#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
+#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
+#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
+
+#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
+#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
+#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
+#define CMX1_CLK_MASK	((uint)0xff000000)
+
+#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
+#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
+#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
+#define CMX2_CLK_MASK	((uint)0x00ff0000)
+
+#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
+#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
+#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
+#define CMX3_CLK_MASK	((uint)0x0000ff00)
+
+#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
+#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
+
+#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
+
+/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PA1_COL		0x00000001U
+#define PA1_CRS		0x00000002U
+#define PA1_TXER	0x00000004U
+#define PA1_TXEN	0x00000008U
+#define PA1_RXDV	0x00000010U
+#define PA1_RXER	0x00000020U
+#define PA1_TXDAT	0x00003c00U
+#define PA1_RXDAT	0x0003c000U
+#define PA1_PSORA0	(PA1_RXDAT | PA1_TXDAT)
+#define PA1_PSORA1	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
+		PA1_RXDV | PA1_RXER)
+#define PA1_DIRA0	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
+#define PA1_DIRA1	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
+
+
+/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB2_TXER	0x00000001U
+#define PB2_RXDV	0x00000002U
+#define PB2_TXEN	0x00000004U
+#define PB2_RXER	0x00000008U
+#define PB2_COL		0x00000010U
+#define PB2_CRS		0x00000020U
+#define PB2_TXDAT	0x000003c0U
+#define PB2_RXDAT	0x00003c00U
+#define PB2_PSORB0	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
+		PB2_RXER | PB2_RXDV | PB2_TXER)
+#define PB2_PSORB1	(PB2_TXEN)
+#define PB2_DIRB0	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
+#define PB2_DIRB1	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
+
+
+/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB3_RXDV	0x00004000U
+#define PB3_RXER	0x00008000U
+#define PB3_TXER	0x00010000U
+#define PB3_TXEN	0x00020000U
+#define PB3_COL		0x00040000U
+#define PB3_CRS		0x00080000U
+#define PB3_TXDAT	0x0f000000U
+#define PC3_TXDAT	0x00000010U
+#define PB3_RXDAT	0x00f00000U
+#define PB3_PSORB0	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
+		PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
+#define PB3_PSORB1	0
+#define PB3_DIRB0	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
+#define PB3_DIRB1	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
+#define PC3_DIRC1	(PC3_TXDAT)
+
+/* Handy macro to specify mem for FCCs*/
+#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
+#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
+#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
+
+/* Clocks and GRG's */
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_FCC1,
+	CPM_CLK_FCC2,
+	CPM_CLK_FCC3,
+	CPM_CLK_SMC1,
+	CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+	CPM_CLK_NONE = 0,
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_BRG5,	/* Baud Rate Generator  5 */
+	CPM_BRG6,	/* Baud Rate Generator  6 */
+	CPM_BRG7,	/* Baud Rate Generator  7 */
+	CPM_BRG8,	/* Baud Rate Generator  8 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+	CPM_CLK9,	/* Clock  9 */
+	CPM_CLK10,	/* Clock 10 */
+	CPM_CLK11,	/* Clock 11 */
+	CPM_CLK12,	/* Clock 12 */
+	CPM_CLK13,	/* Clock 13 */
+	CPM_CLK14,	/* Clock 14 */
+	CPM_CLK15,	/* Clock 15 */
+	CPM_CLK16,	/* Clock 16 */
+	CPM_CLK17,	/* Clock 17 */
+	CPM_CLK18,	/* Clock 18 */
+	CPM_CLK19,	/* Clock 19 */
+	CPM_CLK20,	/* Clock 20 */
+	CPM_CLK_DUMMY
+};
+
+extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
+extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
+
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+void cpm2_set_pin(int port, int pin, int flags);
+
+#endif /* __CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
new file mode 100644
index 00000000000..ef8a248dfd5
--- /dev/null
+++ b/arch/powerpc/include/asm/cputable.h
@@ -0,0 +1,514 @@
+#ifndef __ASM_POWERPC_CPUTABLE_H
+#define __ASM_POWERPC_CPUTABLE_H
+
+#define PPC_FEATURE_32			0x80000000
+#define PPC_FEATURE_64			0x40000000
+#define PPC_FEATURE_601_INSTR		0x20000000
+#define PPC_FEATURE_HAS_ALTIVEC		0x10000000
+#define PPC_FEATURE_HAS_FPU		0x08000000
+#define PPC_FEATURE_HAS_MMU		0x04000000
+#define PPC_FEATURE_HAS_4xxMAC		0x02000000
+#define PPC_FEATURE_UNIFIED_CACHE	0x01000000
+#define PPC_FEATURE_HAS_SPE		0x00800000
+#define PPC_FEATURE_HAS_EFP_SINGLE	0x00400000
+#define PPC_FEATURE_HAS_EFP_DOUBLE	0x00200000
+#define PPC_FEATURE_NO_TB		0x00100000
+#define PPC_FEATURE_POWER4		0x00080000
+#define PPC_FEATURE_POWER5		0x00040000
+#define PPC_FEATURE_POWER5_PLUS		0x00020000
+#define PPC_FEATURE_CELL		0x00010000
+#define PPC_FEATURE_BOOKE		0x00008000
+#define PPC_FEATURE_SMT			0x00004000
+#define PPC_FEATURE_ICACHE_SNOOP	0x00002000
+#define PPC_FEATURE_ARCH_2_05		0x00001000
+#define PPC_FEATURE_PA6T		0x00000800
+#define PPC_FEATURE_HAS_DFP		0x00000400
+#define PPC_FEATURE_POWER6_EXT		0x00000200
+#define PPC_FEATURE_ARCH_2_06		0x00000100
+#define PPC_FEATURE_HAS_VSX		0x00000080
+
+#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
+					0x00000040
+
+#define PPC_FEATURE_TRUE_LE		0x00000002
+#define PPC_FEATURE_PPC_LE		0x00000001
+
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
+
+#ifndef __ASSEMBLY__
+
+/* This structure can grow, it's real size is used by head.S code
+ * via the mkdefs mechanism.
+ */
+struct cpu_spec;
+
+typedef	void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
+typedef	void (*cpu_restore_t)(void);
+
+enum powerpc_oprofile_type {
+	PPC_OPROFILE_INVALID = 0,
+	PPC_OPROFILE_RS64 = 1,
+	PPC_OPROFILE_POWER4 = 2,
+	PPC_OPROFILE_G4 = 3,
+	PPC_OPROFILE_FSL_EMB = 4,
+	PPC_OPROFILE_CELL = 5,
+	PPC_OPROFILE_PA6T = 6,
+};
+
+enum powerpc_pmc_type {
+	PPC_PMC_DEFAULT = 0,
+	PPC_PMC_IBM = 1,
+	PPC_PMC_PA6T = 2,
+};
+
+struct pt_regs;
+
+extern int machine_check_generic(struct pt_regs *regs);
+extern int machine_check_4xx(struct pt_regs *regs);
+extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500(struct pt_regs *regs);
+extern int machine_check_e200(struct pt_regs *regs);
+
+/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
+struct cpu_spec {
+	/* CPU is matched via (PVR & pvr_mask) == pvr_value */
+	unsigned int	pvr_mask;
+	unsigned int	pvr_value;
+
+	char		*cpu_name;
+	unsigned long	cpu_features;		/* Kernel features */
+	unsigned int	cpu_user_features;	/* Userland features */
+
+	/* cache line sizes */
+	unsigned int	icache_bsize;
+	unsigned int	dcache_bsize;
+
+	/* number of performance monitor counters */
+	unsigned int	num_pmcs;
+	enum powerpc_pmc_type pmc_type;
+
+	/* this is called to initialize various CPU bits like L1 cache,
+	 * BHT, SPD, etc... from head.S before branching to identify_machine
+	 */
+	cpu_setup_t	cpu_setup;
+	/* Used to restore cpu setup on secondary processors and at resume */
+	cpu_restore_t	cpu_restore;
+
+	/* Used by oprofile userspace to select the right counters */
+	char		*oprofile_cpu_type;
+
+	/* Processor specific oprofile operations */
+	enum powerpc_oprofile_type oprofile_type;
+
+	/* Bit locations inside the mmcra change */
+	unsigned long	oprofile_mmcra_sihv;
+	unsigned long	oprofile_mmcra_sipr;
+
+	/* Bits to clear during an oprofile exception */
+	unsigned long	oprofile_mmcra_clear;
+
+	/* Name of processor class, for the ELF AT_PLATFORM entry */
+	char		*platform;
+
+	/* Processor specific machine check handling. Return negative
+	 * if the error is fatal, 1 if it was fully recovered and 0 to
+	 * pass up (not CPU originated) */
+	int		(*machine_check)(struct pt_regs *regs);
+};
+
+extern struct cpu_spec		*cur_cpu_spec;
+
+extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
+
+extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
+extern void do_feature_fixups(unsigned long value, void *fixup_start,
+			      void *fixup_end);
+
+extern const char *powerpc_base_platform;
+
+#endif /* __ASSEMBLY__ */
+
+/* CPU kernel features */
+
+/* Retain the 32b definitions all use bottom half of word */
+#define CPU_FTR_COHERENT_ICACHE		ASM_CONST(0x0000000000000001)
+#define CPU_FTR_L2CR			ASM_CONST(0x0000000000000002)
+#define CPU_FTR_SPEC7450		ASM_CONST(0x0000000000000004)
+#define CPU_FTR_ALTIVEC			ASM_CONST(0x0000000000000008)
+#define CPU_FTR_TAU			ASM_CONST(0x0000000000000010)
+#define CPU_FTR_CAN_DOZE		ASM_CONST(0x0000000000000020)
+#define CPU_FTR_USE_TB			ASM_CONST(0x0000000000000040)
+#define CPU_FTR_L2CSR			ASM_CONST(0x0000000000000080)
+#define CPU_FTR_601			ASM_CONST(0x0000000000000100)
+#define CPU_FTR_HPTE_TABLE		ASM_CONST(0x0000000000000200)
+#define CPU_FTR_CAN_NAP			ASM_CONST(0x0000000000000400)
+#define CPU_FTR_L3CR			ASM_CONST(0x0000000000000800)
+#define CPU_FTR_L3_DISABLE_NAP		ASM_CONST(0x0000000000001000)
+#define CPU_FTR_NAP_DISABLE_L2_PR	ASM_CONST(0x0000000000002000)
+#define CPU_FTR_DUAL_PLL_750FX		ASM_CONST(0x0000000000004000)
+#define CPU_FTR_NO_DPM			ASM_CONST(0x0000000000008000)
+#define CPU_FTR_HAS_HIGH_BATS		ASM_CONST(0x0000000000010000)
+#define CPU_FTR_NEED_COHERENT		ASM_CONST(0x0000000000020000)
+#define CPU_FTR_NO_BTIC			ASM_CONST(0x0000000000040000)
+#define CPU_FTR_BIG_PHYS		ASM_CONST(0x0000000000080000)
+#define CPU_FTR_NODSISRALIGN		ASM_CONST(0x0000000000100000)
+#define CPU_FTR_PPC_LE			ASM_CONST(0x0000000000200000)
+#define CPU_FTR_REAL_LE			ASM_CONST(0x0000000000400000)
+#define CPU_FTR_FPU_UNAVAILABLE		ASM_CONST(0x0000000000800000)
+#define CPU_FTR_UNIFIED_ID_CACHE	ASM_CONST(0x0000000001000000)
+#define CPU_FTR_SPE			ASM_CONST(0x0000000002000000)
+#define CPU_FTR_NEED_PAIRED_STWCX	ASM_CONST(0x0000000004000000)
+#define CPU_FTR_LWSYNC			ASM_CONST(0x0000000008000000)
+
+/*
+ * Add the 64-bit processor unique features in the top half of the word;
+ * on 32-bit, make the names available but defined to be 0.
+ */
+#ifdef __powerpc64__
+#define LONG_ASM_CONST(x)		ASM_CONST(x)
+#else
+#define LONG_ASM_CONST(x)		0
+#endif
+
+#define CPU_FTR_SLB			LONG_ASM_CONST(0x0000000100000000)
+#define CPU_FTR_16M_PAGE		LONG_ASM_CONST(0x0000000200000000)
+#define CPU_FTR_TLBIEL			LONG_ASM_CONST(0x0000000400000000)
+#define CPU_FTR_NOEXECUTE		LONG_ASM_CONST(0x0000000800000000)
+#define CPU_FTR_IABR			LONG_ASM_CONST(0x0000002000000000)
+#define CPU_FTR_MMCRA			LONG_ASM_CONST(0x0000004000000000)
+#define CPU_FTR_CTRL			LONG_ASM_CONST(0x0000008000000000)
+#define CPU_FTR_SMT			LONG_ASM_CONST(0x0000010000000000)
+#define CPU_FTR_LOCKLESS_TLBIE		LONG_ASM_CONST(0x0000040000000000)
+#define CPU_FTR_CI_LARGE_PAGE		LONG_ASM_CONST(0x0000100000000000)
+#define CPU_FTR_PAUSE_ZERO		LONG_ASM_CONST(0x0000200000000000)
+#define CPU_FTR_PURR			LONG_ASM_CONST(0x0000400000000000)
+#define CPU_FTR_CELL_TB_BUG		LONG_ASM_CONST(0x0000800000000000)
+#define CPU_FTR_SPURR			LONG_ASM_CONST(0x0001000000000000)
+#define CPU_FTR_DSCR			LONG_ASM_CONST(0x0002000000000000)
+#define CPU_FTR_1T_SEGMENT		LONG_ASM_CONST(0x0004000000000000)
+#define CPU_FTR_NO_SLBIE_B		LONG_ASM_CONST(0x0008000000000000)
+#define CPU_FTR_VSX			LONG_ASM_CONST(0x0010000000000000)
+#define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
+
+#ifndef __ASSEMBLY__
+
+#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_SLB | \
+				 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
+				 CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
+
+/* We only set the altivec features if the kernel was compiled with altivec
+ * support
+ */
+#ifdef CONFIG_ALTIVEC
+#define CPU_FTR_ALTIVEC_COMP	CPU_FTR_ALTIVEC
+#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC
+#else
+#define CPU_FTR_ALTIVEC_COMP	0
+#define PPC_FEATURE_HAS_ALTIVEC_COMP    0
+#endif
+
+/* We only set the VSX features if the kernel was compiled with VSX
+ * support
+ */
+#ifdef CONFIG_VSX
+#define CPU_FTR_VSX_COMP	CPU_FTR_VSX
+#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX
+#else
+#define CPU_FTR_VSX_COMP	0
+#define PPC_FEATURE_HAS_VSX_COMP    0
+#endif
+
+/* We only set the spe features if the kernel was compiled with spe
+ * support
+ */
+#ifdef CONFIG_SPE
+#define CPU_FTR_SPE_COMP	CPU_FTR_SPE
+#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE
+#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE
+#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE
+#else
+#define CPU_FTR_SPE_COMP	0
+#define PPC_FEATURE_HAS_SPE_COMP    0
+#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0
+#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0
+#endif
+
+/* We need to mark all pages as being coherent if we're SMP or we have a
+ * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
+ * require it for PCI "streaming/prefetch" to work properly.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
+	|| defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
+#define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
+#else
+#define CPU_FTR_COMMON                  0
+#endif
+
+/* The powersave features NAP & DOZE seems to confuse BDI when
+   debugging. So if a BDI is used, disable theses
+ */
+#ifndef CONFIG_BDI_SWITCH
+#define CPU_FTR_MAYBE_CAN_DOZE	CPU_FTR_CAN_DOZE
+#define CPU_FTR_MAYBE_CAN_NAP	CPU_FTR_CAN_NAP
+#else
+#define CPU_FTR_MAYBE_CAN_DOZE	0
+#define CPU_FTR_MAYBE_CAN_NAP	0
+#endif
+
+#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
+		     !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
+		     !defined(CONFIG_BOOKE))
+
+#define CPU_FTRS_PPC601	(CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \
+	CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
+#define CPU_FTRS_603	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_604	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE)
+#define CPU_FTRS_740_NOTAU	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_740	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+	    CPU_FTR_PPC_LE)
+#define CPU_FTRS_750	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+	    CPU_FTR_PPC_LE)
+#define CPU_FTRS_750CL	(CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750FX1	(CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM)
+#define CPU_FTRS_750FX2	(CPU_FTRS_750 | CPU_FTR_NO_DPM)
+#define CPU_FTRS_750FX	(CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \
+		CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750GX	(CPU_FTRS_750FX)
+#define CPU_FTRS_7400_NOTAU	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7400	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7450_20	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7450_21	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7450_23	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455_1	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455_20	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447_10	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \
+	    CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447A	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7448	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_82XX	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
+#define CPU_FTRS_G2_LE	(CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_E300	(CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_COMMON)
+#define CPU_FTRS_E300C2	(CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
+#define CPU_FTRS_CLASSIC32	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
+#define CPU_FTRS_8XX	(CPU_FTR_USE_TB)
+#define CPU_FTRS_40X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_44X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E200	(CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
+	    CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
+	    CPU_FTR_UNIFIED_ID_CACHE)
+#define CPU_FTRS_E500	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500_2	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
+	    CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500MC	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \
+	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC)
+#define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
+
+/* 64-bit CPUs */
+#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE)
+#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
+	    CPU_FTR_MMCRA | CPU_FTR_CTRL)
+#define CPU_FTRS_POWER4	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA)
+#define CPU_FTRS_PPC970	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
+#define CPU_FTRS_POWER5	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR)
+#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR)
+#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR | CPU_FTR_SAO)
+#define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
+#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
+	    CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
+#define CPU_FTRS_COMPATIBLE	(CPU_FTR_USE_TB | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2)
+
+#ifdef __powerpc64__
+#define CPU_FTRS_POSSIBLE	\
+	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
+	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
+	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
+	    CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
+#else
+enum {
+	CPU_FTRS_POSSIBLE =
+#if CLASSIC_PPC
+	    CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
+	    CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
+	    CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX |
+	    CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 |
+	    CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
+	    CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
+	    CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
+	    CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
+	    CPU_FTRS_CLASSIC32 |
+#else
+	    CPU_FTRS_GENERIC_32 |
+#endif
+#ifdef CONFIG_8xx
+	    CPU_FTRS_8XX |
+#endif
+#ifdef CONFIG_40x
+	    CPU_FTRS_40X |
+#endif
+#ifdef CONFIG_44x
+	    CPU_FTRS_44X |
+#endif
+#ifdef CONFIG_E200
+	    CPU_FTRS_E200 |
+#endif
+#ifdef CONFIG_E500
+	    CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
+#endif
+	    0,
+};
+#endif /* __powerpc64__ */
+
+#ifdef __powerpc64__
+#define CPU_FTRS_ALWAYS		\
+	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\
+	    CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 &	\
+	    CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
+#else
+enum {
+	CPU_FTRS_ALWAYS =
+#if CLASSIC_PPC
+	    CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
+	    CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
+	    CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX &
+	    CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 &
+	    CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
+	    CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
+	    CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
+	    CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
+	    CPU_FTRS_CLASSIC32 &
+#else
+	    CPU_FTRS_GENERIC_32 &
+#endif
+#ifdef CONFIG_8xx
+	    CPU_FTRS_8XX &
+#endif
+#ifdef CONFIG_40x
+	    CPU_FTRS_40X &
+#endif
+#ifdef CONFIG_44x
+	    CPU_FTRS_44X &
+#endif
+#ifdef CONFIG_E200
+	    CPU_FTRS_E200 &
+#endif
+#ifdef CONFIG_E500
+	    CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
+#endif
+	    CPU_FTRS_POSSIBLE,
+};
+#endif /* __powerpc64__ */
+
+static inline int cpu_has_feature(unsigned long feature)
+{
+	return (CPU_FTRS_ALWAYS & feature) ||
+	       (CPU_FTRS_POSSIBLE
+		& cur_cpu_spec->cpu_features
+		& feature);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_CPUTABLE_H */
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
new file mode 100644
index 00000000000..fb11b0c459b
--- /dev/null
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -0,0 +1,71 @@
+#ifndef _ASM_POWERPC_CPUTHREADS_H
+#define _ASM_POWERPC_CPUTHREADS_H
+
+#include <linux/cpumask.h>
+
+/*
+ * Mapping of threads to cores
+ */
+
+#ifdef CONFIG_SMP
+extern int threads_per_core;
+extern int threads_shift;
+extern cpumask_t threads_core_mask;
+#else
+#define threads_per_core	1
+#define threads_shift		0
+#define threads_core_mask	(CPU_MASK_CPU0)
+#endif
+
+/* cpu_thread_mask_to_cores - Return a cpumask of one per cores
+ *                            hit by the argument
+ *
+ * @threads:	a cpumask of threads
+ *
+ * This function returns a cpumask which will have one "cpu" (or thread)
+ * bit set for each core that has at least one thread set in the argument.
+ *
+ * This can typically be used for things like IPI for tlb invalidations
+ * since those need to be done only once per core/TLB
+ */
+static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+{
+	cpumask_t	tmp, res;
+	int		i;
+
+	res = CPU_MASK_NONE;
+	for (i = 0; i < NR_CPUS; i += threads_per_core) {
+		cpus_shift_left(tmp, threads_core_mask, i);
+		if (cpus_intersects(threads, tmp))
+			cpu_set(i, res);
+	}
+	return res;
+}
+
+static inline int cpu_nr_cores(void)
+{
+	return NR_CPUS >> threads_shift;
+}
+
+static inline cpumask_t cpu_online_cores_map(void)
+{
+	return cpu_thread_mask_to_cores(cpu_online_map);
+}
+
+static inline int cpu_thread_to_core(int cpu)
+{
+	return cpu >> threads_shift;
+}
+
+static inline int cpu_thread_in_core(int cpu)
+{
+	return cpu & (threads_per_core - 1);
+}
+
+static inline int cpu_first_thread_in_core(int cpu)
+{
+	return cpu & ~(threads_per_core - 1);
+}
+
+#endif /* _ASM_POWERPC_CPUTHREADS_H */
+
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
new file mode 100644
index 00000000000..f42e623030e
--- /dev/null
+++ b/arch/powerpc/include/asm/cputime.h
@@ -0,0 +1,235 @@
+/*
+ * Definitions for measuring cputime on powerpc machines.
+ *
+ * Copyright (C) 2006 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in
+ * the same units as the timebase.  Otherwise we measure cpu time
+ * in jiffies using the generic definitions.
+ */
+
+#ifndef __POWERPC_CPUTIME_H
+#define __POWERPC_CPUTIME_H
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#include <asm-generic/cputime.h>
+#else
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <asm/div64.h>
+#include <asm/time.h>
+#include <asm/param.h>
+
+typedef u64 cputime_t;
+typedef u64 cputime64_t;
+
+#define cputime_zero			((cputime_t)0)
+#define cputime_max			((~((cputime_t)0) >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n)		((__a) /  (__n))
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+
+#define cputime64_zero			((cputime64_t)0)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime64_sub(__a, __b)		((__a) - (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+#ifdef __KERNEL__
+
+/*
+ * Convert cputime <-> jiffies
+ */
+extern u64 __cputime_jiffies_factor;
+DECLARE_PER_CPU(unsigned long, cputime_last_delta);
+DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta);
+
+static inline unsigned long cputime_to_jiffies(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_jiffies_factor);
+}
+
+/* Estimate the scaled cputime by scaling the real cputime based on
+ * the last scaled to real ratio */
+static inline cputime_t cputime_to_scaled(const cputime_t ct)
+{
+	if (cpu_has_feature(CPU_FTR_SPURR) &&
+	    per_cpu(cputime_last_delta, smp_processor_id()))
+		return ct *
+			per_cpu(cputime_scaled_last_delta, smp_processor_id())/
+			per_cpu(cputime_last_delta, smp_processor_id());
+	return ct;
+}
+
+static inline cputime_t jiffies_to_cputime(const unsigned long jif)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = jif % HZ;
+	sec = jif / HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
+{
+	cputime_t ct;
+	u64 sec;
+
+	/* have to be a little careful about overflow */
+	ct = jif % HZ;
+	sec = jif / HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+static inline u64 cputime64_to_jiffies64(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_jiffies_factor);
+}
+
+/*
+ * Convert cputime <-> milliseconds
+ */
+extern u64 __cputime_msec_factor;
+
+static inline unsigned long cputime_to_msecs(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_msec_factor);
+}
+
+static inline cputime_t msecs_to_cputime(const unsigned long ms)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = ms % 1000;
+	sec = ms / 1000;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, 1000);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+/*
+ * Convert cputime <-> seconds
+ */
+extern u64 __cputime_sec_factor;
+
+static inline unsigned long cputime_to_secs(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_sec_factor);
+}
+
+static inline cputime_t secs_to_cputime(const unsigned long sec)
+{
+	return (cputime_t) sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> timespec
+ */
+static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
+{
+	u64 x = ct;
+	unsigned int frac;
+
+	frac = do_div(x, tb_ticks_per_sec);
+	p->tv_sec = x;
+	x = (u64) frac * 1000000000;
+	do_div(x, tb_ticks_per_sec);
+	p->tv_nsec = x;
+}
+
+static inline cputime_t timespec_to_cputime(const struct timespec *p)
+{
+	cputime_t ct;
+
+	ct = (u64) p->tv_nsec * tb_ticks_per_sec;
+	do_div(ct, 1000000000);
+	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> timeval
+ */
+static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
+{
+	u64 x = ct;
+	unsigned int frac;
+
+	frac = do_div(x, tb_ticks_per_sec);
+	p->tv_sec = x;
+	x = (u64) frac * 1000000;
+	do_div(x, tb_ticks_per_sec);
+	p->tv_usec = x;
+}
+
+static inline cputime_t timeval_to_cputime(const struct timeval *p)
+{
+	cputime_t ct;
+
+	ct = (u64) p->tv_usec * tb_ticks_per_sec;
+	do_div(ct, 1000000);
+	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> clock_t (units of 1/USER_HZ seconds)
+ */
+extern u64 __cputime_clockt_factor;
+
+static inline unsigned long cputime_to_clock_t(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_clockt_factor);
+}
+
+static inline cputime_t clock_t_to_cputime(const unsigned long clk)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = clk % USER_HZ;
+	sec = clk / USER_HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, USER_HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+#define cputime64_to_clock_t(ct)	cputime_to_clock_t((cputime_t)(ct))
+
+#endif /* __KERNEL__ */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* __POWERPC_CPUTIME_H */
diff --git a/arch/powerpc/include/asm/current.h b/arch/powerpc/include/asm/current.h
new file mode 100644
index 00000000000..e2c7f06931e
--- /dev/null
+++ b/arch/powerpc/include/asm/current.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_POWERPC_CURRENT_H
+#define _ASM_POWERPC_CURRENT_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct task_struct;
+
+#ifdef __powerpc64__
+#include <linux/stddef.h>
+#include <asm/paca.h>
+
+static inline struct task_struct *get_current(void)
+{
+	struct task_struct *task;
+
+	__asm__ __volatile__("ld %0,%1(13)"
+	: "=r" (task)
+	: "i" (offsetof(struct paca_struct, __current)));
+
+	return task;
+}
+#define current	get_current()
+
+#else
+
+/*
+ * We keep `current' in r2 for speed.
+ */
+register struct task_struct *current asm ("r2");
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_CURRENT_H */
diff --git a/arch/powerpc/include/asm/dbdma.h b/arch/powerpc/include/asm/dbdma.h
new file mode 100644
index 00000000000..e23f07e73cb
--- /dev/null
+++ b/arch/powerpc/include/asm/dbdma.h
@@ -0,0 +1,108 @@
+/*
+ * Definitions for using the Apple Descriptor-Based DMA controller
+ * in Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifdef __KERNEL__
+#ifndef _ASM_DBDMA_H_
+#define _ASM_DBDMA_H_
+/*
+ * DBDMA control/status registers.  All little-endian.
+ */
+struct dbdma_regs {
+    unsigned int control;	/* lets you change bits in status */
+    unsigned int status;	/* DMA and device status bits (see below) */
+    unsigned int cmdptr_hi;	/* upper 32 bits of command address */
+    unsigned int cmdptr;	/* (lower 32 bits of) command address (phys) */
+    unsigned int intr_sel;	/* select interrupt condition bit */
+    unsigned int br_sel;	/* select branch condition bit */
+    unsigned int wait_sel;	/* select wait condition bit */
+    unsigned int xfer_mode;
+    unsigned int data2ptr_hi;
+    unsigned int data2ptr;
+    unsigned int res1;
+    unsigned int address_hi;
+    unsigned int br_addr_hi;
+    unsigned int res2[3];
+};
+
+/* Bits in control and status registers */
+#define RUN	0x8000
+#define PAUSE	0x4000
+#define FLUSH	0x2000
+#define WAKE	0x1000
+#define DEAD	0x0800
+#define ACTIVE	0x0400
+#define BT	0x0100
+#define DEVSTAT	0x00ff
+
+/*
+ * DBDMA command structure.  These fields are all little-endian!
+ */
+struct dbdma_cmd {
+    unsigned short req_count;	/* requested byte transfer count */
+    unsigned short command;	/* command word (has bit-fields) */
+    unsigned int   phy_addr;	/* physical data address */
+    unsigned int   cmd_dep;	/* command-dependent field */
+    unsigned short res_count;	/* residual count after completion */
+    unsigned short xfer_status;	/* transfer status */
+};
+
+/* DBDMA command values in command field */
+#define OUTPUT_MORE	0	/* transfer memory data to stream */
+#define OUTPUT_LAST	0x1000	/* ditto followed by end marker */
+#define INPUT_MORE	0x2000	/* transfer stream data to memory */
+#define INPUT_LAST	0x3000	/* ditto, expect end marker */
+#define STORE_WORD	0x4000	/* write word (4 bytes) to device reg */
+#define LOAD_WORD	0x5000	/* read word (4 bytes) from device reg */
+#define DBDMA_NOP	0x6000	/* do nothing */
+#define DBDMA_STOP	0x7000	/* suspend processing */
+
+/* Key values in command field */
+#define KEY_STREAM0	0	/* usual data stream */
+#define KEY_STREAM1	0x100	/* control/status stream */
+#define KEY_STREAM2	0x200	/* device-dependent stream */
+#define KEY_STREAM3	0x300	/* device-dependent stream */
+#define KEY_REGS	0x500	/* device register space */
+#define KEY_SYSTEM	0x600	/* system memory-mapped space */
+#define KEY_DEVICE	0x700	/* device memory-mapped space */
+
+/* Interrupt control values in command field */
+#define INTR_NEVER	0	/* don't interrupt */
+#define INTR_IFSET	0x10	/* intr if condition bit is 1 */
+#define INTR_IFCLR	0x20	/* intr if condition bit is 0 */
+#define INTR_ALWAYS	0x30	/* always interrupt */
+
+/* Branch control values in command field */
+#define BR_NEVER	0	/* don't branch */
+#define BR_IFSET	0x4	/* branch if condition bit is 1 */
+#define BR_IFCLR	0x8	/* branch if condition bit is 0 */
+#define BR_ALWAYS	0xc	/* always branch */
+
+/* Wait control values in command field */
+#define WAIT_NEVER	0	/* don't wait */
+#define WAIT_IFSET	1	/* wait if condition bit is 1 */
+#define WAIT_IFCLR	2	/* wait if condition bit is 0 */
+#define WAIT_ALWAYS	3	/* always wait */
+
+/* Align an address for a DBDMA command structure */
+#define DBDMA_ALIGN(x)	(((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \
+			 & -sizeof(struct dbdma_cmd))
+
+/* Useful macros */
+#define DBDMA_DO_STOP(regs) do {				\
+	out_le32(&((regs)->control), (RUN|FLUSH)<<16);		\
+	while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH))	\
+		; \
+} while(0)
+
+#define DBDMA_DO_RESET(regs) do {				\
+	out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\
+	while(in_le32(&((regs)->status)) & (RUN)) \
+		; \
+} while(0)
+
+#endif /* _ASM_DBDMA_H_ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h
new file mode 100644
index 00000000000..35b71599ec4
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-generic.h
@@ -0,0 +1,49 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_GENERIC_H
+#define _ASM_POWERPC_DCR_GENERIC_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID};
+
+typedef struct {
+	enum host_type_t type;
+	union {
+		dcr_host_mmio_t mmio;
+		dcr_host_native_t native;
+	} host;
+} dcr_host_t;
+
+extern bool dcr_map_ok_generic(dcr_host_t host);
+
+extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n,
+			  unsigned int dcr_c);
+extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c);
+
+extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n);
+
+extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_GENERIC_H */
+
+
diff --git a/arch/powerpc/include/asm/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h
new file mode 100644
index 00000000000..acd491dbd45
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-mmio.h
@@ -0,0 +1,61 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_MMIO_H
+#define _ASM_POWERPC_DCR_MMIO_H
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+typedef struct {
+	void __iomem *token;
+	unsigned int stride;
+	unsigned int base;
+} dcr_host_mmio_t;
+
+static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host)
+{
+	return host.token != NULL;
+}
+
+extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+				    unsigned int dcr_n,
+				    unsigned int dcr_c);
+extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c);
+
+static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n)
+{
+	return in_be32(host.token + ((host.base + dcr_n) * host.stride));
+}
+
+static inline void dcr_write_mmio(dcr_host_mmio_t host,
+				  unsigned int dcr_n,
+				  u32 value)
+{
+	out_be32(host.token + ((host.base + dcr_n) * host.stride), value);
+}
+
+extern u64 of_translate_dcr_address(struct device_node *dev,
+				    unsigned int dcr_n,
+				    unsigned int *stride);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_MMIO_H */
+
+
diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h
new file mode 100644
index 00000000000..72d2b72c739
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-native.h
@@ -0,0 +1,116 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_NATIVE_H
+#define _ASM_POWERPC_DCR_NATIVE_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+
+typedef struct {
+	unsigned int base;
+} dcr_host_native_t;
+
+static inline bool dcr_map_ok_native(dcr_host_native_t host)
+{
+	return 1;
+}
+
+#define dcr_map_native(dev, dcr_n, dcr_c) \
+	((dcr_host_native_t){ .base = (dcr_n) })
+#define dcr_unmap_native(host, dcr_c)		do {} while (0)
+#define dcr_read_native(host, dcr_n)		mfdcr(dcr_n + host.base)
+#define dcr_write_native(host, dcr_n, value)	mtdcr(dcr_n + host.base, value)
+
+/* Device Control Registers */
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn)						\
+	({unsigned int rval;					\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mfdcr %0," __stringify(rn)	\
+		              : "=r" (rval));			\
+	else							\
+		rval = __mfdcr(rn);				\
+	rval;})
+
+#define mtdcr(rn, v)						\
+do {								\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mtdcr " __stringify(rn) ",%0"	\
+			      : : "r" (v)); 			\
+	else							\
+		__mtdcr(rn, v);					\
+} while (0)
+
+/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
+extern spinlock_t dcr_ind_lock;
+
+static inline unsigned __mfdcri(int base_addr, int base_data, int reg)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	val = __mfdcr(base_data);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+	return val;
+}
+
+static inline void __mtdcri(int base_addr, int base_data, int reg,
+			    unsigned val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	__mtdcr(base_data, val);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
+static inline void __dcri_clrset(int base_addr, int base_data, int reg,
+				 unsigned clr, unsigned set)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	val = (__mfdcr(base_data) & ~clr) | set;
+	__mtdcr(base_data, val);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
+#define mfdcri(base, reg)	__mfdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
+					 DCRN_ ## base ## _CONFIG_DATA,	\
+					 reg)
+
+#define mtdcri(base, reg, data)	__mtdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
+					 DCRN_ ## base ## _CONFIG_DATA,	\
+					 reg, data)
+
+#define dcri_clrset(base, reg, clr, set)	__dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR,	\
+							      DCRN_ ## base ## _CONFIG_DATA,	\
+							      reg, clr, set)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
new file mode 100644
index 00000000000..29b0ecef980
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-regs.h
@@ -0,0 +1,149 @@
+/*
+ * Common DCR / SDR / CPR register definitions used on various IBM/AMCC
+ * 4xx processors
+ *
+ *    Copyright 2007 Benjamin Herrenschmidt, IBM Corp
+ *                   <benh@kernel.crashing.org>
+ *
+ * Mostly lifted from asm-ppc/ibm4xx.h by
+ *
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ */
+
+#ifndef __DCR_REGS_H__
+#define __DCR_REGS_H__
+
+/*
+ * Most DCRs used for controlling devices such as the MAL, DMA engine,
+ * etc... are obtained for the device tree.
+ *
+ * The definitions in this files are fixed DCRs and indirect DCRs that
+ * are commonly used outside of specific drivers or refer to core
+ * common registers that may occasionally have to be tweaked outside
+ * of the driver main register set
+ */
+
+/* CPRs (440GX and 440SP/440SPe) */
+#define DCRN_CPR0_CONFIG_ADDR	0xc
+#define DCRN_CPR0_CONFIG_DATA	0xd
+
+/* SDRs (440GX and 440SP/440SPe) */
+#define DCRN_SDR0_CONFIG_ADDR 	0xe
+#define DCRN_SDR0_CONFIG_DATA	0xf
+
+#define SDR0_PFC0		0x4100
+#define SDR0_PFC1		0x4101
+#define SDR0_PFC1_EPS		0x1c00000
+#define SDR0_PFC1_EPS_SHIFT	22
+#define SDR0_PFC1_RMII		0x02000000
+#define SDR0_MFR		0x4300
+#define SDR0_MFR_TAH0 		0x80000000  	/* TAHOE0 Enable */
+#define SDR0_MFR_TAH1 		0x40000000  	/* TAHOE1 Enable */
+#define SDR0_MFR_PCM  		0x10000000  	/* PPC440GP irq compat mode */
+#define SDR0_MFR_ECS  		0x08000000  	/* EMAC int clk */
+#define SDR0_MFR_T0TXFL		0x00080000
+#define SDR0_MFR_T0TXFH		0x00040000
+#define SDR0_MFR_T1TXFL		0x00020000
+#define SDR0_MFR_T1TXFH		0x00010000
+#define SDR0_MFR_E0TXFL		0x00008000
+#define SDR0_MFR_E0TXFH		0x00004000
+#define SDR0_MFR_E0RXFL		0x00002000
+#define SDR0_MFR_E0RXFH		0x00001000
+#define SDR0_MFR_E1TXFL		0x00000800
+#define SDR0_MFR_E1TXFH		0x00000400
+#define SDR0_MFR_E1RXFL		0x00000200
+#define SDR0_MFR_E1RXFH		0x00000100
+#define SDR0_MFR_E2TXFL		0x00000080
+#define SDR0_MFR_E2TXFH		0x00000040
+#define SDR0_MFR_E2RXFL		0x00000020
+#define SDR0_MFR_E2RXFH		0x00000010
+#define SDR0_MFR_E3TXFL		0x00000008
+#define SDR0_MFR_E3TXFH		0x00000004
+#define SDR0_MFR_E3RXFL		0x00000002
+#define SDR0_MFR_E3RXFH		0x00000001
+#define SDR0_UART0		0x0120
+#define SDR0_UART1		0x0121
+#define SDR0_UART2		0x0122
+#define SDR0_UART3		0x0123
+#define SDR0_CUST0		0x4000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_SRAM0_SB0CR	0x00
+#define DCRN_SRAM0_SB1CR	0x01
+#define DCRN_SRAM0_SB2CR	0x02
+#define DCRN_SRAM0_SB3CR	0x03
+#define  SRAM_SBCR_BU_MASK	0x00000180
+#define  SRAM_SBCR_BS_64KB	0x00000800
+#define  SRAM_SBCR_BU_RO	0x00000080
+#define  SRAM_SBCR_BU_RW	0x00000180
+#define DCRN_SRAM0_BEAR		0x04
+#define DCRN_SRAM0_BESR0	0x05
+#define DCRN_SRAM0_BESR1	0x06
+#define DCRN_SRAM0_PMEG		0x07
+#define DCRN_SRAM0_CID		0x08
+#define DCRN_SRAM0_REVID	0x09
+#define DCRN_SRAM0_DPC		0x0a
+#define  SRAM_DPC_ENABLE	0x80000000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_L2C0_CFG		0x00
+#define  L2C_CFG_L2M		0x80000000
+#define  L2C_CFG_ICU		0x40000000
+#define  L2C_CFG_DCU		0x20000000
+#define  L2C_CFG_DCW_MASK	0x1e000000
+#define  L2C_CFG_TPC		0x01000000
+#define  L2C_CFG_CPC		0x00800000
+#define  L2C_CFG_FRAN		0x00200000
+#define  L2C_CFG_SS_MASK	0x00180000
+#define  L2C_CFG_SS_256		0x00000000
+#define  L2C_CFG_CPIM		0x00040000
+#define  L2C_CFG_TPIM		0x00020000
+#define  L2C_CFG_LIM		0x00010000
+#define  L2C_CFG_PMUX_MASK	0x00007000
+#define  L2C_CFG_PMUX_SNP	0x00000000
+#define  L2C_CFG_PMUX_IF	0x00001000
+#define  L2C_CFG_PMUX_DF	0x00002000
+#define  L2C_CFG_PMUX_DS	0x00003000
+#define  L2C_CFG_PMIM		0x00000800
+#define  L2C_CFG_TPEI		0x00000400
+#define  L2C_CFG_CPEI		0x00000200
+#define  L2C_CFG_NAM		0x00000100
+#define  L2C_CFG_SMCM		0x00000080
+#define  L2C_CFG_NBRM		0x00000040
+#define  L2C_CFG_RDBW		0x00000008	/* only 460EX/GT */
+#define DCRN_L2C0_CMD		0x01
+#define  L2C_CMD_CLR		0x80000000
+#define  L2C_CMD_DIAG		0x40000000
+#define  L2C_CMD_INV		0x20000000
+#define  L2C_CMD_CCP		0x10000000
+#define  L2C_CMD_CTE		0x08000000
+#define  L2C_CMD_STRC		0x04000000
+#define  L2C_CMD_STPC		0x02000000
+#define  L2C_CMD_RPMC		0x01000000
+#define  L2C_CMD_HCC		0x00800000
+#define DCRN_L2C0_ADDR		0x02
+#define DCRN_L2C0_DATA		0x03
+#define DCRN_L2C0_SR		0x04
+#define  L2C_SR_CC		0x80000000
+#define  L2C_SR_CPE		0x40000000
+#define  L2C_SR_TPE		0x20000000
+#define  L2C_SR_LRU		0x10000000
+#define  L2C_SR_PCS		0x08000000
+#define DCRN_L2C0_REVID		0x05
+#define DCRN_L2C0_SNP0		0x06
+#define DCRN_L2C0_SNP1		0x07
+#define  L2C_SNP_BA_MASK	0xffff0000
+#define  L2C_SNP_SSR_MASK	0x0000f000
+#define  L2C_SNP_SSR_32G	0x0000f000
+#define  L2C_SNP_ESR		0x00000800
+
+#endif /* __DCR_REGS_H__ */
diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h
new file mode 100644
index 00000000000..d13fb68bb5c
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr.h
@@ -0,0 +1,78 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_H
+#define _ASM_POWERPC_DCR_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_DCR
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+#include <asm/dcr-native.h>
+#endif
+
+#ifdef CONFIG_PPC_DCR_MMIO
+#include <asm/dcr-mmio.h>
+#endif
+
+
+/* Indirection layer for providing both NATIVE and MMIO support. */
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+#include <asm/dcr-generic.h>
+
+#define DCR_MAP_OK(host)	dcr_map_ok_generic(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
+
+#else
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+typedef dcr_host_native_t dcr_host_t;
+#define DCR_MAP_OK(host)	dcr_map_ok_native(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
+#else
+typedef dcr_host_mmio_t dcr_host_t;
+#define DCR_MAP_OK(host)	dcr_map_ok_mmio(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
+#endif
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
+/*
+ * additional helpers to read the DCR * base from the device-tree
+ */
+struct device_node;
+extern unsigned int dcr_resource_start(struct device_node *np,
+				       unsigned int index);
+extern unsigned int dcr_resource_len(struct device_node *np,
+				     unsigned int index);
+#endif /* CONFIG_PPC_DCR */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_H */
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
new file mode 100644
index 00000000000..f9200a65c63
--- /dev/null
+++ b/arch/powerpc/include/asm/delay.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_POWERPC_DELAY_H
+#define _ASM_POWERPC_DELAY_H
+#ifdef __KERNEL__
+
+/*
+ * Copyright 1996, Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan,
+ * Anton Blanchard.
+ */
+
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
+
+/*
+ * On shared processor machines the generic implementation of mdelay can
+ * result in large errors. While each iteration of the loop inside mdelay
+ * is supposed to take 1ms, the hypervisor could sleep our partition for
+ * longer (eg 10ms). With the right timing these errors can add up.
+ *
+ * Since there is no 32bit overflow issue on 64bit kernels, just call
+ * udelay directly.
+ */
+#ifdef CONFIG_PPC64
+#define mdelay(n)	udelay((n) * 1000)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DELAY_H */
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
new file mode 100644
index 00000000000..228ab2a315b
--- /dev/null
+++ b/arch/powerpc/include/asm/device.h
@@ -0,0 +1,24 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_POWERPC_DEVICE_H
+#define _ASM_POWERPC_DEVICE_H
+
+struct dma_mapping_ops;
+struct device_node;
+
+struct dev_archdata {
+	/* Optional pointer to an OF device node */
+	struct device_node	*of_node;
+
+	/* DMA operations on that device */
+	struct dma_mapping_ops	*dma_ops;
+	void			*dma_data;
+
+	/* NUMA node if applicable */
+	int			numa_node;
+};
+
+#endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/div64.h b/arch/powerpc/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/powerpc/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..c7ca45f97dd
--- /dev/null
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -0,0 +1,474 @@
+/*
+ * Copyright (C) 2004 IBM
+ *
+ * Implements the generic device dma API for powerpc.
+ * the pci and vio busses
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/cache.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-attrs.h>
+#include <asm/io.h>
+
+#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * DMA-consistent mapping functions for PowerPCs that don't support
+ * cache snooping.  These allocate/free a region of uncached mapped
+ * memory space for use with DMA devices.  Alternatively, you could
+ * allocate the space "normally" and use the cache management functions
+ * to ensure it is consistent.
+ */
+extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+extern void __dma_free_coherent(size_t size, void *vaddr);
+extern void __dma_sync(void *vaddr, size_t size, int direction);
+extern void __dma_sync_page(struct page *page, unsigned long offset,
+				 size_t size, int direction);
+
+#else /* ! CONFIG_NOT_COHERENT_CACHE */
+/*
+ * Cache coherent cores.
+ */
+
+#define __dma_alloc_coherent(gfp, size, handle)	NULL
+#define __dma_free_coherent(size, addr)		((void)0)
+#define __dma_sync(addr, size, rw)		((void)0)
+#define __dma_sync_page(pg, off, sz, rw)	((void)0)
+
+#endif /* ! CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+	if (dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
+/*
+ * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
+ */
+struct dma_mapping_ops {
+	void *		(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void		(*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t	(*map_single)(struct device *dev, void *ptr,
+				size_t size, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+				size_t size, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	int		(*dma_supported)(struct device *dev, u64 mask);
+	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
+};
+
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+{
+	/* We don't handle the NULL dev case for ISA for now. We could
+	 * do it via an out of line call but it is not needed for now. The
+	 * only ISA DMA device we support is the floppy and we have a hack
+	 * in the floppy driver directly to get a device for us.
+	 */
+	if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
+		return NULL;
+	return dev->archdata.dma_ops;
+}
+
+static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return 0;
+	if (dma_ops->dma_supported == NULL)
+		return 1;
+	return dma_ops->dma_supported(dev, mask);
+}
+
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return -EIO;
+	if (dma_ops->set_dma_mask != NULL)
+		return dma_ops->set_dma_mask(dev, dma_mask);
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+static inline dma_addr_t dma_map_single_attrs(struct device *dev,
+					      void *cpu_addr,
+					      size_t size,
+					      enum dma_data_direction direction,
+					      struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
+}
+
+static inline void dma_unmap_single_attrs(struct device *dev,
+					  dma_addr_t dma_addr,
+					  size_t size,
+					  enum dma_data_direction direction,
+					  struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+}
+
+static inline dma_addr_t dma_map_page_attrs(struct device *dev,
+					    struct page *page,
+					    unsigned long offset, size_t size,
+					    enum dma_data_direction direction,
+					    struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_single(dev, page_address(page) + offset, size,
+			direction, attrs);
+}
+
+static inline void dma_unmap_page_attrs(struct device *dev,
+					dma_addr_t dma_address,
+					size_t size,
+					enum dma_data_direction direction,
+					struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
+}
+
+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
+				   int nents, enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
+}
+
+static inline void dma_unmap_sg_attrs(struct device *dev,
+				      struct scatterlist *sg,
+				      int nhwentries,
+				      enum dma_data_direction direction,
+				      struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nhwentries,
+				enum dma_data_direction direction)
+{
+	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
+}
+
+/*
+ * Available generic sets of operations
+ */
+extern struct dma_mapping_ops dma_iommu_ops;
+extern struct dma_mapping_ops dma_direct_ops;
+
+#else /* CONFIG_PPC64 */
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t * dma_handle,
+				       gfp_t gfp)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	return __dma_alloc_coherent(size, dma_handle, gfp);
+#else
+	void *ret;
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+		gfp |= GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, get_order(size));
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_bus(ret);
+	}
+
+	return ret;
+#endif
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+		  dma_addr_t dma_handle)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	__dma_free_coherent(size, vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync(ptr, size, direction);
+
+	return virt_to_bus(ptr);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	/* We do nothing. */
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync_page(page, offset, size, direction);
+
+	return page_to_bus(page) + offset;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	/* We do nothing. */
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
+	   enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i) {
+		BUG_ON(!sg_page(sg));
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
+	}
+
+	return nents;
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nhwentries,
+				enum dma_data_direction direction)
+{
+	/* We don't do anything here. */
+}
+
+#endif /* CONFIG_PPC64 */
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sgl, int nents,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i)
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sgl, int nents,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i)
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_PPC64
+	return (dma_addr == DMA_ERROR_CODE);
+#else
+	return 0;
+#endif
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define dma_is_consistent(d, h)	(0)
+#else
+#define dma_is_consistent(d, h)	(1)
+#endif
+
+static inline int dma_get_cache_alignment(void)
+{
+#ifdef CONFIG_PPC64
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << INTERNODE_CACHE_SHIFT);
+#else
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+#endif
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, unsigned long offset, size_t size,
+		enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+		dma_addr_t dma_handle, unsigned long offset, size_t size,
+		enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(vaddr, size, (int)direction);
+}
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_DMA_MAPPING_H */
diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h
new file mode 100644
index 00000000000..a7e06e25c70
--- /dev/null
+++ b/arch/powerpc/include/asm/dma.h
@@ -0,0 +1,360 @@
+#ifndef _ASM_POWERPC_DMA_H
+#define _ASM_POWERPC_DMA_H
+#ifdef __KERNEL__
+
+/*
+ * Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * Changes for ppc sound by Christoph Nadig
+ */
+
+/*
+ * Note: Adapted for PowerPC by Gary Thomas
+ * Modified by Cort Dougan <cort@cs.nmt.edu>
+ *
+ * None of this really applies for Power Macintoshes.  There is
+ * basically just enough here to get kernel/dma.c to compile.
+ *
+ * There may be some comments or restrictions made here which are
+ * not valid for the PReP platform.  Take what you read
+ * with a grain of salt.
+ */
+
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+
+#ifndef MAX_DMA_CHANNELS
+#define MAX_DMA_CHANNELS	8
+#endif
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Doesn't really apply... */
+#define MAX_DMA_ADDRESS		(~0UL)
+
+#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI)
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG		0x09	/* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG		0x0D	/* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG	0x0E	/* Clear Mask */
+#define DMA1_MASK_ALL_REG	0x0F	/* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG		0xD2	/* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG		0xDA	/* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG	0xDC	/* Clear Mask */
+#define DMA2_MASK_ALL_REG	0xDE	/* all-channels mask (w) */
+
+#define DMA_ADDR_0		0x00	/* DMA address registers */
+#define DMA_ADDR_1		0x02
+#define DMA_ADDR_2		0x04
+#define DMA_ADDR_3		0x06
+#define DMA_ADDR_4		0xC0
+#define DMA_ADDR_5		0xC4
+#define DMA_ADDR_6		0xC8
+#define DMA_ADDR_7		0xCC
+
+#define DMA_CNT_0		0x01	/* DMA count registers */
+#define DMA_CNT_1		0x03
+#define DMA_CNT_2		0x05
+#define DMA_CNT_3		0x07
+#define DMA_CNT_4		0xC2
+#define DMA_CNT_5		0xC6
+#define DMA_CNT_6		0xCA
+#define DMA_CNT_7		0xCE
+
+#define DMA_LO_PAGE_0		0x87	/* DMA page registers */
+#define DMA_LO_PAGE_1		0x83
+#define DMA_LO_PAGE_2		0x81
+#define DMA_LO_PAGE_3		0x82
+#define DMA_LO_PAGE_5		0x8B
+#define DMA_LO_PAGE_6		0x89
+#define DMA_LO_PAGE_7		0x8A
+
+#define DMA_HI_PAGE_0		0x487	/* DMA page registers */
+#define DMA_HI_PAGE_1		0x483
+#define DMA_HI_PAGE_2		0x481
+#define DMA_HI_PAGE_3		0x482
+#define DMA_HI_PAGE_5		0x48B
+#define DMA_HI_PAGE_6		0x489
+#define DMA_HI_PAGE_7		0x48A
+
+#define DMA1_EXT_REG		0x40B
+#define DMA2_EXT_REG		0x4D6
+
+#ifndef __powerpc64__
+    /* in arch/ppc/kernel/setup.c -- Cort */
+    extern unsigned int DMA_MODE_WRITE;
+    extern unsigned int DMA_MODE_READ;
+    extern unsigned long ISA_DMA_THRESHOLD;
+#else
+    #define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+    #define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#endif
+
+#define DMA_MODE_CASCADE	0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT		0x10
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	unsigned char ucDmaCmd = 0x00;
+
+	if (dmanr != 4) {
+		dma_outb(0, DMA2_MASK_REG);	/* This may not be enabled */
+		dma_outb(ucDmaCmd, DMA2_CMD_REG);	/* Enable group */
+	}
+	if (dmanr <= 3) {
+		dma_outb(dmanr, DMA1_MASK_REG);
+		dma_outb(ucDmaCmd, DMA1_CMD_REG);	/* Enable group */
+	} else {
+		dma_outb(dmanr & 3, DMA2_MASK_REG);
+	}
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr | 4, DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(0, DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr <= 3)
+		dma_outb(mode | dmanr, DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
+{
+	switch (dmanr) {
+	case 0:
+		dma_outb(pagenr, DMA_LO_PAGE_0);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_0);
+		break;
+	case 1:
+		dma_outb(pagenr, DMA_LO_PAGE_1);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_1);
+		break;
+	case 2:
+		dma_outb(pagenr, DMA_LO_PAGE_2);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_2);
+		break;
+	case 3:
+		dma_outb(pagenr, DMA_LO_PAGE_3);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
+		break;
+	case 5:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
+		break;
+	case 6:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
+		break;
+	case 7:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
+		break;
+	}
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
+{
+	if (dmanr <= 3) {
+		dma_outb(phys & 0xff,
+			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
+		dma_outb((phys >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
+	} else {
+		dma_outb((phys >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((phys >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+	}
+	set_dma_page(dmanr, phys >> 16);
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;
+	if (dmanr <= 3) {
+		dma_outb(count & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+		dma_outb((count >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+	} else {
+		dma_outb((count >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+		dma_outb((count >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+	}
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr <= 3)
+	    ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
+	    : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr <= 3) ? count : (count << 1);
+}
+
+/* These are in kernel/dma.c: */
+
+/* reserve a DMA channel */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+/* release it again */
+extern void free_dma(unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif	/* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_DMA_H */
diff --git a/arch/powerpc/include/asm/edac.h b/arch/powerpc/include/asm/edac.h
new file mode 100644
index 00000000000..6ead88bbfbb
--- /dev/null
+++ b/arch/powerpc/include/asm/edac.h
@@ -0,0 +1,40 @@
+/*
+ * PPC EDAC common defs
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+/*
+ * ECC atomic, DMA, SMP and interrupt safe scrub function.
+ * Implements the per arch atomic_scrub() that EDAC use for software
+ * ECC scrubbing.  It reads memory and then writes back the original
+ * value, allowing the hardware to detect and correct memory errors.
+ */
+static __inline__ void atomic_scrub(void *va, u32 size)
+{
+	unsigned int *virt_addr = va;
+	unsigned int temp;
+	unsigned int i;
+
+	for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
+		/* Very carefully read and write to memory atomically
+		 * so we are interrupt, DMA and SMP safe.
+		 */
+		__asm__ __volatile__ ("\n\
+				1:	lwarx	%0,0,%1\n\
+					stwcx.	%0,0,%1\n\
+					bne-	1b\n\
+					isync"
+					: "=&r"(temp)
+					: "r"(virt_addr)
+					: "cr0", "memory");
+	}
+}
+
+#endif
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
new file mode 100644
index 00000000000..b886bec6701
--- /dev/null
+++ b/arch/powerpc/include/asm/eeh.h
@@ -0,0 +1,211 @@
+/*
+ * eeh.h
+ * Copyright (C) 2001  Dave Engebretsen & Todd Inglett IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_EEH_H
+#define _PPC64_EEH_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/string.h>
+
+struct pci_dev;
+struct pci_bus;
+struct device_node;
+
+#ifdef CONFIG_EEH
+
+extern int eeh_subsystem_enabled;
+
+/* Values for eeh_mode bits in device_node */
+#define EEH_MODE_SUPPORTED     (1<<0)
+#define EEH_MODE_NOCHECK       (1<<1)
+#define EEH_MODE_ISOLATED      (1<<2)
+#define EEH_MODE_RECOVERING    (1<<3)
+#define EEH_MODE_IRQ_DISABLED  (1<<4)
+
+/* Max number of EEH freezes allowed before we consider the device
+ * to be permanently disabled. */
+#define EEH_MAX_ALLOWED_FREEZES 5
+
+void __init eeh_init(void);
+unsigned long eeh_check_failure(const volatile void __iomem *token,
+				unsigned long val);
+int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
+void __init pci_addr_cache_build(void);
+
+/**
+ * eeh_add_device_early
+ * eeh_add_device_late
+ *
+ * Perform eeh initialization for devices added after boot.
+ * Call eeh_add_device_early before doing any i/o to the
+ * device (including config space i/o).  Call eeh_add_device_late
+ * to finish the eeh setup for this device.
+ */
+void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_tree_late(struct pci_bus *);
+
+/**
+ * eeh_remove_device_recursive - undo EEH for device & children.
+ * @dev: pci device to be removed
+ *
+ * As above, this removes the device; it also removes child
+ * pci devices as well.
+ */
+void eeh_remove_bus_device(struct pci_dev *);
+
+/**
+ * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
+ *
+ * If this macro yields TRUE, the caller relays to eeh_check_failure()
+ * which does further tests out of line.
+ */
+#define EEH_POSSIBLE_ERROR(val, type)	((val) == (type)~0 && eeh_subsystem_enabled)
+
+/*
+ * Reads from a device which has been isolated by EEH will return
+ * all 1s.  This macro gives an all-1s value of the given size (in
+ * bytes: 1, 2, or 4) for comparing with the result of a read.
+ */
+#define EEH_IO_ERROR_VALUE(size)	(~0U >> ((4 - (size)) * 8))
+
+#else /* !CONFIG_EEH */
+static inline void eeh_init(void) { }
+
+static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
+{
+	return val;
+}
+
+static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
+{
+	return 0;
+}
+
+static inline void pci_addr_cache_build(void) { }
+
+static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+
+static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+
+static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
+#define EEH_POSSIBLE_ERROR(val, type) (0)
+#define EEH_IO_ERROR_VALUE(size) (-1UL)
+#endif /* CONFIG_EEH */
+
+/*
+ * MMIO read/write operations with EEH support.
+ */
+static inline u8 eeh_readb(const volatile void __iomem *addr)
+{
+	u8 val = in_8(addr);
+	if (EEH_POSSIBLE_ERROR(val, u8))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u16 eeh_readw(const volatile void __iomem *addr)
+{
+	u16 val = in_le16(addr);
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u32 eeh_readl(const volatile void __iomem *addr)
+{
+	u32 val = in_le32(addr);
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u64 eeh_readq(const volatile void __iomem *addr)
+{
+	u64 val = in_le64(addr);
+	if (EEH_POSSIBLE_ERROR(val, u64))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u16 eeh_readw_be(const volatile void __iomem *addr)
+{
+	u16 val = in_be16(addr);
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u32 eeh_readl_be(const volatile void __iomem *addr)
+{
+	u32 val = in_be32(addr);
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u64 eeh_readq_be(const volatile void __iomem *addr)
+{
+	u64 val = in_be64(addr);
+	if (EEH_POSSIBLE_ERROR(val, u64))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline void eeh_memcpy_fromio(void *dest, const
+				     volatile void __iomem *src,
+				     unsigned long n)
+{
+	_memcpy_fromio(dest, src, n);
+
+	/* Look for ffff's here at dest[n].  Assume that at least 4 bytes
+	 * were copied. Check all four bytes.
+	 */
+	if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32))
+		eeh_check_failure(src, *((u32 *)(dest + n - 4)));
+}
+
+/* in-string eeh macros */
+static inline void eeh_readsb(const volatile void __iomem *addr, void * buf,
+			      int ns)
+{
+	_insb(addr, buf, ns);
+	if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8))
+		eeh_check_failure(addr, *(u8*)buf);
+}
+
+static inline void eeh_readsw(const volatile void __iomem *addr, void * buf,
+			      int ns)
+{
+	_insw(addr, buf, ns);
+	if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16))
+		eeh_check_failure(addr, *(u16*)buf);
+}
+
+static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
+			      int nl)
+{
+	_insl(addr, buf, nl);
+	if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32))
+		eeh_check_failure(addr, *(u32*)buf);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_EEH_H */
diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h
new file mode 100644
index 00000000000..cc3cb04539a
--- /dev/null
+++ b/arch/powerpc/include/asm/eeh_event.h
@@ -0,0 +1,53 @@
+/*
+ *	eeh_event.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
+ */
+
+#ifndef ASM_POWERPC_EEH_EVENT_H
+#define ASM_POWERPC_EEH_EVENT_H
+#ifdef __KERNEL__
+
+/** EEH event -- structure holding pci controller data that describes
+ *  a change in the isolation status of a PCI slot.  A pointer
+ *  to this struct is passed as the data pointer in a notify callback.
+ */
+struct eeh_event {
+	struct list_head     list;
+	struct device_node 	*dn;   /* struct device node */
+	struct pci_dev       *dev;  /* affected device */
+};
+
+/**
+ * eeh_send_failure_event - generate a PCI error event
+ * @dev pci device
+ *
+ * This routine builds a PCI error event which will be delivered
+ * to all listeners on the eeh_notifier_chain.
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event (struct device_node *dn,
+                            struct pci_dev *dev);
+
+/* Main recovery function */
+struct pci_dn * handle_eeh_events (struct eeh_event *);
+
+#endif /* __KERNEL__ */
+#endif /* ASM_POWERPC_EEH_EVENT_H */
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
new file mode 100644
index 00000000000..64c6ee22eef
--- /dev/null
+++ b/arch/powerpc/include/asm/elf.h
@@ -0,0 +1,431 @@
+#ifndef _ASM_POWERPC_ELF_H
+#define _ASM_POWERPC_ELF_H
+
+#ifdef __KERNEL__
+#include <linux/sched.h>	/* for task_struct */
+#include <asm/page.h>
+#include <asm/string.h>
+#endif
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+#include <asm/auxvec.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE		0
+#define R_PPC_ADDR32		1	/* 32bit absolute address */
+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
+#define R_PPC_ADDR16		3	/* 16bit absolute address */
+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN	8
+#define R_PPC_ADDR14_BRNTAKEN	9
+#define R_PPC_REL24		10	/* PC relative 26 bit */
+#define R_PPC_REL14		11	/* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN	12
+#define R_PPC_REL14_BRNTAKEN	13
+#define R_PPC_GOT16		14
+#define R_PPC_GOT16_LO		15
+#define R_PPC_GOT16_HI		16
+#define R_PPC_GOT16_HA		17
+#define R_PPC_PLTREL24		18
+#define R_PPC_COPY		19
+#define R_PPC_GLOB_DAT		20
+#define R_PPC_JMP_SLOT		21
+#define R_PPC_RELATIVE		22
+#define R_PPC_LOCAL24PC		23
+#define R_PPC_UADDR32		24
+#define R_PPC_UADDR16		25
+#define R_PPC_REL32		26
+#define R_PPC_PLT32		27
+#define R_PPC_PLTREL32		28
+#define R_PPC_PLT16_LO		29
+#define R_PPC_PLT16_HI		30
+#define R_PPC_PLT16_HA		31
+#define R_PPC_SDAREL16		32
+#define R_PPC_SECTOFF		33
+#define R_PPC_SECTOFF_LO	34
+#define R_PPC_SECTOFF_HI	35
+#define R_PPC_SECTOFF_HA	36
+
+/* PowerPC relocations defined for the TLS access ABI.  */
+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
+
+/* keep this the last entry. */
+#define R_PPC_NUM		95
+
+/*
+ * ELF register definitions..
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+
+typedef unsigned long elf_greg_t64;
+typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
+
+typedef unsigned int elf_greg_t32;
+typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
+typedef elf_gregset_t32 compat_elf_gregset_t;
+
+/*
+ * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
+ */
+#ifdef __powerpc64__
+# define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
+# define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
+# define ELF_NVSRHALFREG 32	/* Half the vsx registers */
+# define ELF_GREG_TYPE	elf_greg_t64
+#else
+# define ELF_NEVRREG	34	/* includes acc (as 2) */
+# define ELF_NVRREG	33	/* includes vscr */
+# define ELF_GREG_TYPE	elf_greg_t32
+# define ELF_ARCH	EM_PPC
+# define ELF_CLASS	ELFCLASS32
+# define ELF_DATA	ELFDATA2MSB
+#endif /* __powerpc64__ */
+
+#ifndef ELF_ARCH
+# define ELF_ARCH	EM_PPC64
+# define ELF_CLASS	ELFCLASS64
+# define ELF_DATA	ELFDATA2MSB
+  typedef elf_greg_t64 elf_greg_t;
+  typedef elf_gregset_t64 elf_gregset_t;
+#else
+  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
+  typedef elf_greg_t32 elf_greg_t;
+  typedef elf_gregset_t32 elf_gregset_t;
+#endif /* ELF_ARCH */
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+/*
+ * The entries with indexes 0-31 contain the corresponding vector registers. 
+ * The entry with index 32 contains the vscr as the last word (offset 12) 
+ * within the quadword.  This allows the vscr to be stored as either a 
+ * quadword (since it must be copied via a vector register to/from storage) 
+ * or as a word.  
+ *
+ * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
+ * word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32 
+ * ptrace interface.  This allows signal handling and ptrace to use the same 
+ * structures.  This also simplifies the implementation of a bi-arch 
+ * (combined (32- and 64-bit) gdb.
+ *
+ * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
+ * vrsave along with vscr and so only uses 33 vectors for the register set
+ */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+#ifdef __powerpc64__
+typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
+typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
+#endif
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
+#define compat_elf_check_arch(x)	((x)->e_machine == EM_PPC)
+
+#define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (0x20000000)
+
+/*
+ * Our registers are always unsigned longs, whether we're a 32 bit
+ * process or 64 bit, on either a 64 bit or 32 bit kernel.
+ *
+ * This macro relies on elf_regs[i] having the right type to truncate to,
+ * either u32 or u64.  It defines the body of the elf_core_copy_regs
+ * function, either the native one with elf_gregset_t elf_regs or
+ * the 32-bit one with elf_gregset_t32 elf_regs.
+ */
+#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \
+	int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \
+			   (size_t)ELF_NGREG);			  \
+	for (i = 0; i < nregs; i++) \
+		elf_regs[i] = ((unsigned long *) regs)[i]; \
+	memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0]))
+
+/* Common routine for both 32-bit and 64-bit native processes */
+static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs,
+					  struct pt_regs *regs)
+{
+	PPC_ELF_CORE_COPY_REGS(elf_regs, regs);
+}
+#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs);
+
+typedef elf_vrregset_t elf_fpxregset_t;
+
+/* ELF_HWCAP yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+# define ELF_HWCAP	(cur_cpu_spec->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM	(cur_cpu_spec->platform)
+
+/* While ELF_PLATFORM indicates the ISA supported by the platform, it
+ * may not accurately reflect the underlying behavior of the hardware
+ * (as in the case of running in Power5+ compatibility mode on a
+ * Power6 machine).  ELF_BASE_PLATFORM allows ld.so to load libraries
+ * that are tuned for the real hardware.
+ */
+#define ELF_BASE_PLATFORM (powerpc_base_platform)
+
+#ifdef __powerpc64__
+# define ELF_PLAT_INIT(_r, load_addr)	do {	\
+	_r->gpr[2] = load_addr; 		\
+} while (0)
+#endif /* __powerpc64__ */
+
+#ifdef __powerpc64__
+# define SET_PERSONALITY(ex, ibcs2)				\
+do {								\
+	unsigned long new_flags = 0;				\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
+		new_flags = _TIF_32BIT;				\
+	if ((current_thread_info()->flags & _TIF_32BIT)		\
+	    != new_flags)					\
+		set_thread_flag(TIF_ABI_PENDING);		\
+	else							\
+		clear_thread_flag(TIF_ABI_PENDING);		\
+	if (personality(current->personality) != PER_LINUX32)	\
+		set_personality(PER_LINUX |			\
+			(current->personality & (~PER_MASK)));	\
+} while (0)
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically. This
+ * is only required to work around bugs in old 32bit toolchains. Since
+ * the 64bit ABI has never had these issues dont enable the workaround
+ * even if we have an executable stack.
+ */
+# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
+		(exec_stk != EXSTACK_DISABLE_X) : 0)
+#else 
+# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif /* __powerpc64__ */
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
+
+#endif /* __KERNEL__ */
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ *   AUXV is greater than 16 for glibc compatibility.
+ *   AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
+ */
+#define ARCH_DLINFO							\
+do {									\
+	/* Handle glibc compatibility. */				\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	/* Cache size items */						\
+	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
+	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
+	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
+	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base)	\
+} while (0)
+
+/* PowerPC64 relocations defined by the ABIs */
+#define R_PPC64_NONE    R_PPC_NONE
+#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
+#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
+#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
+#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
+#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
+#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
+#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
+#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
+#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
+#define R_PPC64_GOT16     R_PPC_GOT16
+#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
+#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
+#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
+
+#define R_PPC64_COPY      R_PPC_COPY
+#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
+#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
+#define R_PPC64_RELATIVE  R_PPC_RELATIVE
+
+#define R_PPC64_UADDR32   R_PPC_UADDR32
+#define R_PPC64_UADDR16   R_PPC_UADDR16
+#define R_PPC64_REL32     R_PPC_REL32
+#define R_PPC64_PLT32     R_PPC_PLT32
+#define R_PPC64_PLTREL32  R_PPC_PLTREL32
+#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
+#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
+#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
+
+#define R_PPC64_SECTOFF     R_PPC_SECTOFF
+#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
+#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
+#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
+#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
+#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
+#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
+#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
+#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
+#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
+#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
+#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
+#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
+#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
+#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
+#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
+#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
+#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
+#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
+#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
+#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
+
+#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
+#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
+#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
+#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
+#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
+#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
+#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
+#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
+#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
+#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
+
+/* PowerPC64 relocations defined for the TLS access ABI.  */
+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
+
+/* Keep this the last entry.  */
+#define R_PPC64_NUM		107
+
+/* There's actually a third entry here, but it's unused */
+struct ppc64_opd_entry
+{
+	unsigned long funcaddr;
+	unsigned long r2;
+};
+
+#ifdef  __KERNEL__
+
+#ifdef CONFIG_SPU_BASE
+/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
+#define NT_SPU		1
+
+#define ARCH_HAVE_EXTRA_ELF_NOTES
+
+#endif /* CONFIG_SPU_BASE */
+
+#endif /* __KERNEL */
+
+#endif /* _ASM_POWERPC_ELF_H */
diff --git a/arch/powerpc/include/asm/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..3711bd9d50b
--- /dev/null
+++ b/arch/powerpc/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/powerpc/include/asm/errno.h b/arch/powerpc/include/asm/errno.h
new file mode 100644
index 00000000000..8c145fd17d8
--- /dev/null
+++ b/arch/powerpc/include/asm/errno.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_POWERPC_ERRNO_H
+#define _ASM_POWERPC_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#undef	EDEADLOCK
+#define	EDEADLOCK	58	/* File locking deadlock error */
+
+#define _LAST_ERRNO	516
+
+#endif	/* _ASM_POWERPC_ERRNO_H */
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h
new file mode 100644
index 00000000000..329148b5acc
--- /dev/null
+++ b/arch/powerpc/include/asm/exception.h
@@ -0,0 +1,311 @@
+#ifndef _ASM_POWERPC_EXCEPTION_H
+#define _ASM_POWERPC_EXCEPTION_H
+/*
+ * Extracted from head_64.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+/*
+ * The following macros define the code that appears as
+ * the prologue to each of the exception handlers.  They
+ * are split into two parts to allow a single kernel binary
+ * to be used for pSeries and iSeries.
+ *
+ * We make as much of the exception code common between native
+ * exception handlers (including pSeries LPAR) and iSeries LPAR
+ * implementations as possible.
+ */
+
+#define EX_R9		0
+#define EX_R10		8
+#define EX_R11		16
+#define EX_R12		24
+#define EX_R13		32
+#define EX_SRR0		40
+#define EX_DAR		48
+#define EX_DSISR	56
+#define EX_CCR		60
+#define EX_R3		64
+#define EX_LR		72
+
+/*
+ * We're short on space and time in the exception prolog, so we can't
+ * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
+ * low halfword of the address, but for Kdump we need the whole low
+ * word.
+ */
+#ifdef CONFIG_CRASH_DUMP
+#define LOAD_HANDLER(reg, label)					\
+	oris	reg,reg,(label)@h;	/* virt addr of handler ... */	\
+	ori	reg,reg,(label)@l;	/* .. and the rest */
+#else
+#define LOAD_HANDLER(reg, label)					\
+	ori	reg,reg,(label)@l;	/* virt addr of handler ... */
+#endif
+
+#define EXCEPTION_PROLOG_1(area)				\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
+	std	r10,area+EX_R10(r13);					\
+	std	r11,area+EX_R11(r13);					\
+	std	r12,area+EX_R12(r13);					\
+	mfspr	r9,SPRN_SPRG1;						\
+	std	r9,area+EX_R13(r13);					\
+	mfcr	r9
+
+/*
+ * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
+ * The firmware calls the registered system_reset_fwnmi and
+ * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
+ * a 32bit application at the time of the event.
+ * This firmware bug is present on POWER4 and JS20.
+ */
+#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)		\
+	EXCEPTION_PROLOG_1(area);					\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	/* force 64bit mode */						\
+	li	r11,5;			/* MSR_SF_LG|MSR_ISF_LG */	\
+	rldimi	r10,r11,61,0;		/* insert into top 3 bits */	\
+	/* done 64bit mode */						\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+	EXCEPTION_PROLOG_1(area);					\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+/*
+ * The common exception prolog is used for all except a few exceptions
+ * such as a segment miss on a kernel address.  We have to be prepared
+ * to take another exception from the point where we first touch the
+ * kernel stack onwards.
+ *
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ */
+#define EXCEPTION_PROLOG_COMMON(n, area)				   \
+	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
+	mr	r10,r1;			/* Save r1			*/ \
+	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
+	beq-	1f;							   \
+	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
+1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
+	bge-	cr1,2f;			/* abort if it is		*/ \
+	b	3f;							   \
+2:	li	r1,(n);			/* will be reloaded later	*/ \
+	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	b	bad_stack;						   \
+3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
+	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
+	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
+	std	r10,0(r1);		/* make stack chain pointer	*/ \
+	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
+	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
+	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
+	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
+	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
+	ld	r10,area+EX_R10(r13);					   \
+	std	r9,GPR9(r1);						   \
+	std	r10,GPR10(r1);						   \
+	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
+	ld	r10,area+EX_R12(r13);					   \
+	ld	r11,area+EX_R13(r13);					   \
+	std	r9,GPR11(r1);						   \
+	std	r10,GPR12(r1);						   \
+	std	r11,GPR13(r1);						   \
+	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
+	mflr	r9;			/* save LR in stackframe	*/ \
+	std	r9,_LINK(r1);						   \
+	mfctr	r10;			/* save CTR in stackframe	*/ \
+	std	r10,_CTR(r1);						   \
+	lbz	r10,PACASOFTIRQEN(r13);				   \
+	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
+	std	r10,SOFTE(r1);						   \
+	std	r11,_XER(r1);						   \
+	li	r9,(n)+1;						   \
+	std	r9,_TRAP(r1);		/* set trap number		*/ \
+	li	r10,0;							   \
+	ld	r11,exception_marker@toc(r2);				   \
+	std	r10,RESULT(r1);		/* clear regs->result		*/ \
+	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
+
+/*
+ * Exception vectors.
+ */
+#define STD_EXCEPTION_PSERIES(n, label)			\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+#define HSTD_EXCEPTION_PSERIES(n, label)		\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
+	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR0,r20;				\
+	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR1,r20;				\
+	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+
+#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
+	. = n;								\
+	.globl label##_pSeries;						\
+label##_pSeries:							\
+	HMT_MEDIUM;							\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
+	std	r10,PACA_EXGEN+EX_R10(r13);				\
+	lbz	r10,PACASOFTIRQEN(r13);					\
+	mfcr	r9;							\
+	cmpwi	r10,0;							\
+	beq	masked_interrupt;					\
+	mfspr	r10,SPRN_SPRG1;						\
+	std	r10,PACA_EXGEN+EX_R13(r13);				\
+	std	r11,PACA_EXGEN+EX_R11(r13);				\
+	std	r12,PACA_EXGEN+EX_R12(r13);				\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label##_common)				\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+#ifdef CONFIG_PPC_ISERIES
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+BEGIN_FW_FTR_SECTION;				\
+	stb	r11,PACAHARDIRQEN(r13);		\
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
+	TRACE_DISABLE_INTS;			\
+BEGIN_FW_FTR_SECTION;				\
+	mfmsr	r10;				\
+	ori	r10,r10,MSR_EE;			\
+	mtmsrd	r10,1;				\
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#else
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+	stb	r11,PACAHARDIRQEN(r13);		\
+	TRACE_DISABLE_INTS
+#endif /* CONFIG_PPC_ISERIES */
+
+#define ENABLE_INTS				\
+	ld	r12,_MSR(r1);			\
+	mfmsr	r11;				\
+	rlwimi	r11,r12,0,MSR_EE;		\
+	mtmsrd	r11,1
+
+#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+BEGIN_FTR_SECTION					\
+	bl	.ppc64_runlatch_on;			\
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except_lite
+
+/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP				\
+BEGIN_FTR_SECTION				\
+	clrrdi	r11,r1,THREAD_SHIFT;		\
+	ld	r9,TI_LOCAL_FLAGS(r11);		\
+	andi.	r10,r9,_TLF_NAPPING;		\
+	bnel	power4_fixup_nap;		\
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+#endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/include/asm/fb.h b/arch/powerpc/include/asm/fb.h
new file mode 100644
index 00000000000..411af8d17a6
--- /dev/null
+++ b/arch/powerpc/include/asm/fb.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT,
+						 vma->vm_end - vma->vm_start,
+						 vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/powerpc/include/asm/fcntl.h b/arch/powerpc/include/asm/fcntl.h
new file mode 100644
index 00000000000..ce5c4516d40
--- /dev/null
+++ b/arch/powerpc/include/asm/fcntl.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_FCNTL_H
+#define _ASM_FCNTL_H
+
+#define O_DIRECTORY      040000	/* must be a directory */
+#define O_NOFOLLOW      0100000	/* don't follow links */
+#define O_LARGEFILE     0200000
+#define O_DIRECT	0400000	/* direct disk access hint */
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_FCNTL_H */
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
new file mode 100644
index 00000000000..a1029967620
--- /dev/null
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H
+#define __ASM_POWERPC_FEATURE_FIXUPS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * Feature section common macros
+ *
+ * Note that the entries now contain offsets between the table entry
+ * and the code rather than absolute code pointers in order to be
+ * useable with the vdso shared library. There is also an assumption
+ * that values will be negative, that is, the fixup table has to be
+ * located after the code it fixes up.
+ */
+#if defined(CONFIG_PPC64) && !defined(__powerpc64__)
+/* 64 bits kernel, 32 bits code (ie. vdso32) */
+#define FTR_ENTRY_LONG		.llong
+#define FTR_ENTRY_OFFSET	.long 0xffffffff; .long
+#else
+/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
+#define FTR_ENTRY_LONG		PPC_LONG
+#define FTR_ENTRY_OFFSET	PPC_LONG
+#endif
+
+#define START_FTR_SECTION(label)	label##1:
+
+#define FTR_SECTION_ELSE_NESTED(label)			\
+label##2:						\
+	.pushsection __ftr_alt_##label,"a";		\
+	.align 2;					\
+label##3:
+
+#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect)	\
+label##4:						\
+	.popsection;					\
+	.pushsection sect,"a";				\
+	.align 3;					\
+label##5:					       	\
+	FTR_ENTRY_LONG msk;				\
+	FTR_ENTRY_LONG val;				\
+	FTR_ENTRY_OFFSET label##1b-label##5b;		\
+	FTR_ENTRY_OFFSET label##2b-label##5b;	 	\
+	FTR_ENTRY_OFFSET label##3b-label##5b;		\
+	FTR_ENTRY_OFFSET label##4b-label##5b;	 	\
+	.popsection;
+
+
+/* CPU feature dependent sections */
+#define BEGIN_FTR_SECTION_NESTED(label)	START_FTR_SECTION(label)
+#define BEGIN_FTR_SECTION		START_FTR_SECTION(97)
+
+#define END_FTR_SECTION_NESTED(msk, val, label) 		\
+	FTR_SECTION_ELSE_NESTED(label)				\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
+
+#define END_FTR_SECTION(msk, val)		\
+	END_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_FTR_SECTION_IFSET(msk)	END_FTR_SECTION((msk), (msk))
+#define END_FTR_SECTION_IFCLR(msk)	END_FTR_SECTION((msk), 0)
+
+/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */
+#define FTR_SECTION_ELSE	FTR_SECTION_ELSE_NESTED(97)
+#define ALT_FTR_SECTION_END_NESTED(msk, val, label)	\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
+#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label)	\
+	ALT_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label)	\
+	ALT_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_FTR_SECTION_END(msk, val)	\
+	ALT_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_FTR_SECTION_END_IFSET(msk)	\
+	ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_FTR_SECTION_END_IFCLR(msk)	\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
+/* Firmware feature dependent sections */
+#define BEGIN_FW_FTR_SECTION_NESTED(label)	START_FTR_SECTION(label)
+#define BEGIN_FW_FTR_SECTION			START_FTR_SECTION(97)
+
+#define END_FW_FTR_SECTION_NESTED(msk, val, label) 		\
+	FTR_SECTION_ELSE_NESTED(label)				\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
+
+#define END_FW_FTR_SECTION(msk, val)		\
+	END_FW_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_FW_FTR_SECTION_IFSET(msk)	END_FW_FTR_SECTION((msk), (msk))
+#define END_FW_FTR_SECTION_IFCLR(msk)	END_FW_FTR_SECTION((msk), 0)
+
+/* Firmware feature sections with alternatives */
+#define FW_FTR_SECTION_ELSE_NESTED(label)	FTR_SECTION_ELSE_NESTED(label)
+#define FW_FTR_SECTION_ELSE	FTR_SECTION_ELSE_NESTED(97)
+#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label)	\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
+#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_FW_FTR_SECTION_END(msk, val)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_FW_FTR_SECTION_END_IFSET(msk)	\
+	ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_FW_FTR_SECTION_END_IFCLR(msk)	\
+	ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
+#endif /* __ASSEMBLY__ */
+
+/* LWSYNC feature sections */
+#define START_LWSYNC_SECTION(label)	label##1:
+#define MAKE_LWSYNC_SECTION_ENTRY(label, sect)		\
+label##2:						\
+	.pushsection sect,"a";				\
+	.align 2;					\
+label##3:					       	\
+	.long label##1b-label##3b;			\
+	.popsection;
+
+#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
new file mode 100644
index 00000000000..3a179827528
--- /dev/null
+++ b/arch/powerpc/include/asm/firmware.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_POWERPC_FIRMWARE_H
+#define __ASM_POWERPC_FIRMWARE_H
+
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
+
+/* firmware feature bitmask values */
+#define FIRMWARE_MAX_FEATURES 63
+
+#define FW_FEATURE_PFT		ASM_CONST(0x0000000000000001)
+#define FW_FEATURE_TCE		ASM_CONST(0x0000000000000002)
+#define FW_FEATURE_SPRG0	ASM_CONST(0x0000000000000004)
+#define FW_FEATURE_DABR		ASM_CONST(0x0000000000000008)
+#define FW_FEATURE_COPY		ASM_CONST(0x0000000000000010)
+#define FW_FEATURE_ASR		ASM_CONST(0x0000000000000020)
+#define FW_FEATURE_DEBUG	ASM_CONST(0x0000000000000040)
+#define FW_FEATURE_TERM		ASM_CONST(0x0000000000000080)
+#define FW_FEATURE_PERF		ASM_CONST(0x0000000000000100)
+#define FW_FEATURE_DUMP		ASM_CONST(0x0000000000000200)
+#define FW_FEATURE_INTERRUPT	ASM_CONST(0x0000000000000400)
+#define FW_FEATURE_MIGRATE	ASM_CONST(0x0000000000000800)
+#define FW_FEATURE_PERFMON	ASM_CONST(0x0000000000001000)
+#define FW_FEATURE_CRQ		ASM_CONST(0x0000000000002000)
+#define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
+#define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
+#define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
+#define FW_FEATURE_BULK		ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
+#define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
+#define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
+#define FW_FEATURE_ISERIES	ASM_CONST(0x0000000000200000)
+#define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
+#define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
+#define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
+#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
+#define FW_FEATURE_CMO		ASM_CONST(0x0000000004000000)
+
+#ifndef __ASSEMBLY__
+
+enum {
+#ifdef CONFIG_PPC64
+	FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE |
+		FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY |
+		FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM |
+		FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
+		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
+		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
+		FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
+		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
+	FW_FEATURE_PSERIES_ALWAYS = 0,
+	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
+	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
+	FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
+	FW_FEATURE_CELLEB_ALWAYS = 0,
+	FW_FEATURE_NATIVE_POSSIBLE = 0,
+	FW_FEATURE_NATIVE_ALWAYS = 0,
+	FW_FEATURE_POSSIBLE =
+#ifdef CONFIG_PPC_PSERIES
+		FW_FEATURE_PSERIES_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_ISERIES
+		FW_FEATURE_ISERIES_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_PS3
+		FW_FEATURE_PS3_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_CELLEB
+		FW_FEATURE_CELLEB_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_NATIVE
+		FW_FEATURE_NATIVE_ALWAYS |
+#endif
+		0,
+	FW_FEATURE_ALWAYS =
+#ifdef CONFIG_PPC_PSERIES
+		FW_FEATURE_PSERIES_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_ISERIES
+		FW_FEATURE_ISERIES_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_PS3
+		FW_FEATURE_PS3_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_CELLEB
+		FW_FEATURE_CELLEB_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_NATIVE
+		FW_FEATURE_NATIVE_ALWAYS &
+#endif
+		FW_FEATURE_POSSIBLE,
+
+#else /* CONFIG_PPC64 */
+	FW_FEATURE_POSSIBLE = 0,
+	FW_FEATURE_ALWAYS = 0,
+#endif
+};
+
+/* This is used to identify firmware features which are available
+ * to the kernel.
+ */
+extern unsigned long	powerpc_firmware_features;
+
+#define firmware_has_feature(feature)					\
+	((FW_FEATURE_ALWAYS & (feature)) ||				\
+		(FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature)))
+
+extern void system_reset_fwnmi(void);
+extern void machine_check_fwnmi(void);
+
+/* This is true if we are using the firmware NMI handler (typically LPAR) */
+extern int fwnmi_active;
+
+extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
new file mode 100644
index 00000000000..8428b38a3d3
--- /dev/null
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -0,0 +1,106 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *   Port to powerpc added by Kumar Gala
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+extern unsigned long FIXADDR_TOP;
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	/* FIX_PCIE_MCFG, */
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					phys_addr_t phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define clear_fixmap(idx) \
+		__set_fixmap(idx, 0, __pgprot(0))
+
+#define __FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif /* !__ASSEMBLY__ */
+#endif
diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h
new file mode 100644
index 00000000000..24bd34c57e9
--- /dev/null
+++ b/arch/powerpc/include/asm/floppy.h
@@ -0,0 +1,213 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_POWERPC_FLOPPY_H
+#define __ASM_POWERPC_FLOPPY_H
+#ifdef __KERNEL__
+
+#include <asm/machdep.h>
+
+#define fd_inb(port)		inb_p(port)
+#define fd_outb(value,port)	outb_p(value,port)
+
+#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
+#define fd_disable_dma()	 fd_ops->_disable_dma(FLOPPY_DMA)
+#define fd_free_dma()           fd_ops->_free_dma(FLOPPY_DMA)
+#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
+#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA, mode)
+#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
+#define fd_get_dma_residue()    fd_ops->_get_dma_residue(FLOPPY_DMA)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_cacheflush(addr,size) /* nothing */
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+#include <linux/pci.h>
+#include <asm/ppc-pci.h>	/* for isa_bridge_pcidev */
+
+#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io)
+
+static int fd_request_dma(void);
+
+struct fd_dma_ops {
+	void (*_disable_dma)(unsigned int dmanr);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+};
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_vdma;
+static struct fd_dma_ops *fd_ops;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+	unsigned char st;
+	int lcount;
+	char *lptr;
+
+	if (!doing_vdma)
+		return floppy_interrupt(irq, dev_id);
+
+
+	st = 1;
+	for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
+	     lcount; lcount--, lptr++) {
+		st=inb(virtual_dma_port+4) & 0xa0 ;
+		if (st != 0xa0)
+			break;
+		if (virtual_dma_mode)
+			outb_p(*lptr, virtual_dma_port+5);
+		else
+			*lptr = inb_p(virtual_dma_port+5);
+	}
+	virtual_dma_count = lcount;
+	virtual_dma_addr = lptr;
+	st = inb(virtual_dma_port+4);
+
+	if (st == 0x20)
+		return IRQ_HANDLED;
+	if (!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+		doing_vdma = 0;
+		floppy_interrupt(irq, dev_id);
+		return IRQ_HANDLED;
+	}
+	return IRQ_HANDLED;
+}
+
+static void vdma_disable_dma(unsigned int dummy)
+{
+	doing_vdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if (can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,
+				   IRQF_DISABLED, "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+				   IRQF_DISABLED, "floppy", NULL);
+}
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_vdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	static unsigned long prev_size;
+	static dma_addr_t bus_addr = 0;
+	static char *prev_addr;
+	static int prev_dir;
+	int dir;
+
+	doing_vdma = 0;
+	dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+
+	if (bus_addr 
+	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
+		/* different from last time -- unmap prev */
+		pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir);
+		bus_addr = 0;
+	}
+
+	if (!bus_addr)	/* need to map it */
+		bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir);
+
+	/* remember this one as prev */
+	prev_addr = addr;
+	prev_size = size;
+	prev_dir = dir;
+
+	fd_clear_dma_ff();
+	fd_cacheflush(addr, size);
+	fd_set_dma_mode(mode);
+	set_dma_addr(FLOPPY_DMA, bus_addr);
+	fd_set_dma_count(size);
+	virtual_dma_port = io;
+	fd_enable_dma();
+
+	return 0;
+}
+
+static struct fd_dma_ops real_dma_ops =
+{
+	._disable_dma = disable_dma,
+	._free_dma = free_dma,
+	._get_dma_residue = get_dma_residue,
+	._dma_setup = hard_dma_setup
+};
+
+static struct fd_dma_ops virt_dma_ops =
+{
+	._disable_dma = vdma_disable_dma,
+	._free_dma = vdma_nop,
+	._get_dma_residue = vdma_get_dma_residue,
+	._dma_setup = vdma_dma_setup
+};
+
+static int fd_request_dma(void)
+{
+	if (can_use_virtual_dma & 1) {
+		fd_ops = &virt_dma_ops;
+		return 0;
+	}
+	else {
+		fd_ops = &real_dma_ops;
+		return request_dma(FLOPPY_DMA, "floppy");
+	}
+}
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Again, the CMOS information not available
+ */
+#define FLOPPY0_TYPE 6
+#define FLOPPY1_TYPE 0
+
+#define N_FDC 2			/* Don't change this! */
+#define N_DRIVE 8
+
+/*
+ * The PowerPC has no problems with floppy DMA crossing 64k borders.
+ */
+#define CROSS_64KB(a,s)	(0)
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_FLOPPY_H */
diff --git a/arch/powerpc/include/asm/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h
new file mode 100644
index 00000000000..9361cd5342c
--- /dev/null
+++ b/arch/powerpc/include/asm/fs_pd.h
@@ -0,0 +1,50 @@
+/*
+ * Platform information definitions.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_PD_H
+#define FS_PD_H
+#include <sysdev/fsl_soc.h>
+#include <asm/time.h>
+
+#ifdef CONFIG_CPM2
+#include <asm/cpm2.h>
+
+#if defined(CONFIG_8260)
+#include <asm/mpc8260.h>
+#endif
+
+#define cpm2_map(member) (&cpm2_immr->member)
+#define cpm2_map_size(member, size) (&cpm2_immr->member)
+#define cpm2_unmap(addr) do {} while(0)
+#endif
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/mpc8xx.h>
+
+extern immap_t __iomem *mpc8xx_immr;
+
+#define immr_map(member) (&mpc8xx_immr->member)
+#define immr_map_size(member, size) (&mpc8xx_immr->member)
+#define immr_unmap(addr) do {} while (0)
+#endif
+
+static inline int uart_baudrate(void)
+{
+        return get_baudrate();
+}
+
+static inline int uart_clock(void)
+{
+        return ppc_proc_freq;
+}
+
+#endif
diff --git a/arch/powerpc/include/asm/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h
new file mode 100644
index 00000000000..8e8c9b5032d
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_gtm.h
@@ -0,0 +1,47 @@
+/*
+ * Freescale General-purpose Timers Module
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_FSL_GTM_H
+#define __ASM_FSL_GTM_H
+
+#include <linux/types.h>
+
+struct gtm;
+
+struct gtm_timer {
+	unsigned int irq;
+
+	struct gtm *gtm;
+	bool requested;
+	u8 __iomem *gtcfr;
+	__be16 __iomem *gtmdr;
+	__be16 __iomem *gtpsr;
+	__be16 __iomem *gtcnr;
+	__be16 __iomem *gtrfr;
+	__be16 __iomem *gtevr;
+};
+
+extern struct gtm_timer *gtm_get_timer16(void);
+extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
+						  unsigned int timer);
+extern void gtm_put_timer16(struct gtm_timer *tmr);
+extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec,
+			     bool reload);
+extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec,
+				 bool reload);
+extern void gtm_stop_timer16(struct gtm_timer *tmr);
+extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events);
+
+#endif /* __ASM_FSL_GTM_H */
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
new file mode 100644
index 00000000000..303f5484c05
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -0,0 +1,311 @@
+/* Freescale Local Bus Controller
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ *          Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_FSL_LBC_H
+#define __ASM_FSL_LBC_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+struct fsl_lbc_bank {
+	__be32 br;             /**< Base Register  */
+#define BR_BA           0xFFFF8000
+#define BR_BA_SHIFT             15
+#define BR_PS           0x00001800
+#define BR_PS_SHIFT             11
+#define BR_PS_8         0x00000800  /* Port Size 8 bit */
+#define BR_PS_16        0x00001000  /* Port Size 16 bit */
+#define BR_PS_32        0x00001800  /* Port Size 32 bit */
+#define BR_DECC         0x00000600
+#define BR_DECC_SHIFT            9
+#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
+#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
+#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
+#define BR_WP           0x00000100
+#define BR_WP_SHIFT              8
+#define BR_MSEL         0x000000E0
+#define BR_MSEL_SHIFT            5
+#define BR_MS_GPCM      0x00000000  /* GPCM */
+#define BR_MS_FCM       0x00000020  /* FCM */
+#define BR_MS_SDRAM     0x00000060  /* SDRAM */
+#define BR_MS_UPMA      0x00000080  /* UPMA */
+#define BR_MS_UPMB      0x000000A0  /* UPMB */
+#define BR_MS_UPMC      0x000000C0  /* UPMC */
+#define BR_V            0x00000001
+#define BR_V_SHIFT               0
+#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+	__be32 or;             /**< Base Register  */
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_FCM_AM               0xFFFF8000
+#define OR_FCM_AM_SHIFT                 15
+#define OR_FCM_BCTLD            0x00001000
+#define OR_FCM_BCTLD_SHIFT              12
+#define OR_FCM_PGS              0x00000400
+#define OR_FCM_PGS_SHIFT                10
+#define OR_FCM_CSCT             0x00000200
+#define OR_FCM_CSCT_SHIFT                9
+#define OR_FCM_CST              0x00000100
+#define OR_FCM_CST_SHIFT                 8
+#define OR_FCM_CHT              0x00000080
+#define OR_FCM_CHT_SHIFT                 7
+#define OR_FCM_SCY              0x00000070
+#define OR_FCM_SCY_SHIFT                 4
+#define OR_FCM_SCY_1            0x00000010
+#define OR_FCM_SCY_2            0x00000020
+#define OR_FCM_SCY_3            0x00000030
+#define OR_FCM_SCY_4            0x00000040
+#define OR_FCM_SCY_5            0x00000050
+#define OR_FCM_SCY_6            0x00000060
+#define OR_FCM_SCY_7            0x00000070
+#define OR_FCM_RST              0x00000008
+#define OR_FCM_RST_SHIFT                 3
+#define OR_FCM_TRLX             0x00000004
+#define OR_FCM_TRLX_SHIFT                2
+#define OR_FCM_EHTR             0x00000002
+#define OR_FCM_EHTR_SHIFT                1
+};
+
+struct fsl_lbc_regs {
+	struct fsl_lbc_bank bank[8];
+	u8 res0[0x28];
+	__be32 mar;             /**< UPM Address Register */
+	u8 res1[0x4];
+	__be32 mamr;            /**< UPMA Mode Register */
+#define MxMR_OP_NO	(0 << 28) /**< normal operation */
+#define MxMR_OP_WA	(1 << 28) /**< write array */
+#define MxMR_OP_RA	(2 << 28) /**< read array */
+#define MxMR_OP_RP	(3 << 28) /**< run pattern */
+#define MxMR_MAD	0x3f      /**< machine address */
+	__be32 mbmr;            /**< UPMB Mode Register */
+	__be32 mcmr;            /**< UPMC Mode Register */
+	u8 res2[0x8];
+	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
+	__be32 mdr;             /**< UPM Data Register */
+	u8 res3[0x4];
+	__be32 lsor;            /**< Special Operation Initiation Register */
+	__be32 lsdmr;           /**< SDRAM Mode Register */
+	u8 res4[0x8];
+	__be32 lurt;            /**< UPM Refresh Timer */
+	__be32 lsrt;            /**< SDRAM Refresh Timer */
+	u8 res5[0x8];
+	__be32 ltesr;           /**< Transfer Error Status Register */
+#define LTESR_BM   0x80000000
+#define LTESR_FCT  0x40000000
+#define LTESR_PAR  0x20000000
+#define LTESR_WP   0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS   0x00080000
+#define LTESR_CC   0x00000001
+#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+	__be32 ltedr;           /**< Transfer Error Disable Register */
+	__be32 lteir;           /**< Transfer Error Interrupt Register */
+	__be32 lteatr;          /**< Transfer Error Attributes Register */
+	__be32 ltear;           /**< Transfer Error Address Register */
+	u8 res6[0xC];
+	__be32 lbcr;            /**< Configuration Register */
+#define LBCR_LDIS  0x80000000
+#define LBCR_LDIS_SHIFT    31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT   22
+#define LBCR_AHD   0x00200000
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT   17
+#define LBCR_EPAR  0x00010000
+#define LBCR_EPAR_SHIFT    16
+#define LBCR_BMT   0x0000FF00
+#define LBCR_BMT_SHIFT      8
+#define LBCR_INIT  0x00040000
+	__be32 lcrr;            /**< Clock Ratio Register */
+#define LCRR_DBYP    0x80000000
+#define LCRR_DBYP_SHIFT      31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT   28
+#define LCRR_ECL     0x03000000
+#define LCRR_ECL_SHIFT       24
+#define LCRR_EADC    0x00030000
+#define LCRR_EADC_SHIFT      16
+#define LCRR_CLKDIV  0x0000000F
+#define LCRR_CLKDIV_SHIFT     0
+	u8 res7[0x8];
+	__be32 fmr;             /**< Flash Mode Register */
+#define FMR_CWTO     0x0000F000
+#define FMR_CWTO_SHIFT       12
+#define FMR_BOOT     0x00000800
+#define FMR_ECCM     0x00000100
+#define FMR_AL       0x00000030
+#define FMR_AL_SHIFT          4
+#define FMR_OP       0x00000003
+#define FMR_OP_SHIFT          0
+	__be32 fir;             /**< Flash Instruction Register */
+#define FIR_OP0      0xF0000000
+#define FIR_OP0_SHIFT        28
+#define FIR_OP1      0x0F000000
+#define FIR_OP1_SHIFT        24
+#define FIR_OP2      0x00F00000
+#define FIR_OP2_SHIFT        20
+#define FIR_OP3      0x000F0000
+#define FIR_OP3_SHIFT        16
+#define FIR_OP4      0x0000F000
+#define FIR_OP4_SHIFT        12
+#define FIR_OP5      0x00000F00
+#define FIR_OP5_SHIFT         8
+#define FIR_OP6      0x000000F0
+#define FIR_OP6_SHIFT         4
+#define FIR_OP7      0x0000000F
+#define FIR_OP7_SHIFT         0
+#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
+#define FIR_OP_CA    0x1        /* Issue current column address */
+#define FIR_OP_PA    0x2        /* Issue current block+page address */
+#define FIR_OP_UA    0x3        /* Issue user defined address */
+#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
+#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
+	__be32 fcr;             /**< Flash Command Register */
+#define FCR_CMD0     0xFF000000
+#define FCR_CMD0_SHIFT       24
+#define FCR_CMD1     0x00FF0000
+#define FCR_CMD1_SHIFT       16
+#define FCR_CMD2     0x0000FF00
+#define FCR_CMD2_SHIFT        8
+#define FCR_CMD3     0x000000FF
+#define FCR_CMD3_SHIFT        0
+	__be32 fbar;            /**< Flash Block Address Register */
+#define FBAR_BLK     0x00FFFFFF
+	__be32 fpar;            /**< Flash Page Address Register */
+#define FPAR_SP_PI   0x00007C00
+#define FPAR_SP_PI_SHIFT     10
+#define FPAR_SP_MS   0x00000200
+#define FPAR_SP_CI   0x000001FF
+#define FPAR_SP_CI_SHIFT      0
+#define FPAR_LP_PI   0x0003F000
+#define FPAR_LP_PI_SHIFT     12
+#define FPAR_LP_MS   0x00000800
+#define FPAR_LP_CI   0x000007FF
+#define FPAR_LP_CI_SHIFT      0
+	__be32 fbcr;            /**< Flash Byte Count Register */
+#define FBCR_BC      0x00000FFF
+	u8 res11[0x8];
+	u8 res8[0xF00];
+};
+
+extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+extern spinlock_t fsl_lbc_lock;
+
+/*
+ * FSL UPM routines
+ */
+struct fsl_upm {
+	__be32 __iomem *mxmr;
+	int width;
+};
+
+extern int fsl_lbc_find(phys_addr_t addr_base);
+extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
+
+/**
+ * fsl_upm_start_pattern - start UPM patterns execution
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @pat_offset:	UPM pattern offset for the command to be executed
+ *
+ * This routine programmes UPM so the next memory access that hits an UPM
+ * will trigger pattern execution, starting at pat_offset.
+ */
+static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
+{
+	clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset);
+}
+
+/**
+ * fsl_upm_end_pattern - end UPM patterns execution
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ *
+ * This routine reverts UPM to normal operation mode.
+ */
+static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
+{
+	clrbits32(upm->mxmr, MxMR_OP_RP);
+
+	while (in_be32(upm->mxmr) & MxMR_OP_RP)
+		cpu_relax();
+}
+
+/**
+ * fsl_upm_run_pattern - actually run an UPM pattern
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @io_base:	remapped pointer to where memory access should happen
+ * @mar:	MAR register content during pattern execution
+ *
+ * This function triggers dummy write to the memory specified by the io_base,
+ * thus UPM pattern actually executed. Note that mar usage depends on the
+ * pre-programmed AMX bits in the UPM RAM.
+ */
+static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
+				      void __iomem *io_base, u32 mar)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsl_lbc_lock, flags);
+
+	out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
+
+	switch (upm->width) {
+	case 8:
+		out_8(io_base, 0x0);
+		break;
+	case 16:
+		out_be16(io_base, 0x0);
+		break;
+	case 32:
+		out_be32(io_base, 0x0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
+
+	return ret;
+}
+
+#endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
new file mode 100644
index 00000000000..de921326cca
--- /dev/null
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_POWERPC_FTRACE
+#define _ASM_POWERPC_FTRACE
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR		((long)(_mcount))
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_POWERPC_FTRACE */
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
new file mode 100644
index 00000000000..6d406c5c5de
--- /dev/null
+++ b/arch/powerpc/include/asm/futex.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_FUTEX_H
+#define _ASM_POWERPC_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/synch.h>
+#include <asm/asm-compat.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+  __asm__ __volatile ( \
+	LWSYNC_ON_SMP \
+"1:	lwarx	%0,0,%2\n" \
+	insn \
+	PPC405_ERR77(0, %2) \
+"2:	stwcx.	%1,0,%2\n" \
+	"bne-	1b\n" \
+	"li	%1,0\n" \
+"3:	.section .fixup,\"ax\"\n" \
+"4:	li	%1,%3\n" \
+	"b	3b\n" \
+	".previous\n" \
+	".section __ex_table,\"a\"\n" \
+	".align 3\n" \
+	PPC_LONG "1b,4b,2b,4b\n" \
+	".previous" \
+	: "=&r" (oldval), "=&r" (ret) \
+	: "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+	: "cr0", "memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int prev;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+        __asm__ __volatile__ (
+        LWSYNC_ON_SMP
+"1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
+        cmpw    0,%0,%3\n\
+        bne-    3f\n"
+        PPC405_ERR77(0,%2)
+"2:     stwcx.  %4,0,%2\n\
+        bne-    1b\n"
+        ISYNC_ON_SMP
+"3:	.section .fixup,\"ax\"\n\
+4:	li	%0,%5\n\
+	b	3b\n\
+	.previous\n\
+	.section __ex_table,\"a\"\n\
+	.align 3\n\
+	" PPC_LONG "1b,4b,2b,4b\n\
+	.previous" \
+        : "=&r" (prev), "+m" (*uaddr)
+        : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)
+        : "cc", "memory");
+
+        return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_FUTEX_H */
diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h
new file mode 100644
index 00000000000..ea04632399d
--- /dev/null
+++ b/arch/powerpc/include/asm/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/arch/powerpc/include/asm/grackle.h b/arch/powerpc/include/asm/grackle.h
new file mode 100644
index 00000000000..bd7812a519d
--- /dev/null
+++ b/arch/powerpc/include/asm/grackle.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_GRACKLE_H
+#define _ASM_POWERPC_GRACKLE_H
+#ifdef __KERNEL__
+/*
+ * Functions for setting up and using a MPC106 northbridge
+ */
+
+#include <asm/pci-bridge.h>
+
+extern void setup_grackle(struct pci_controller *hose);
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_GRACKLE_H */
diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h
new file mode 100644
index 00000000000..288e14d53b7
--- /dev/null
+++ b/arch/powerpc/include/asm/hardirq.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_POWERPC_HARDIRQ_H
+#define _ASM_POWERPC_HARDIRQ_H
+#ifdef __KERNEL__
+
+#include <asm/irq.h>
+#include <asm/bug.h>
+
+/* The __last_jiffy_stamp field is needed to ensure that no decrementer
+ * interrupt is lost on SMP machines. Since on most CPUs it is in the same
+ * cache line as local_irq_count, it is cheap to access and is also used on UP
+ * for uniformity.
+ */
+typedef struct {
+	unsigned int __softirq_pending;	/* set_bit is used on this */
+	unsigned int __last_jiffy_stamp;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
+
+static inline void ack_bad_irq(int irq)
+{
+	printk(KERN_CRIT "illegal vector %d received!\n", irq);
+	BUG();
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HARDIRQ_H */
diff --git a/arch/powerpc/include/asm/heathrow.h b/arch/powerpc/include/asm/heathrow.h
new file mode 100644
index 00000000000..93f54958a9d
--- /dev/null
+++ b/arch/powerpc/include/asm/heathrow.h
@@ -0,0 +1,67 @@
+#ifndef _ASM_POWERPC_HEATHROW_H
+#define _ASM_POWERPC_HEATHROW_H
+#ifdef __KERNEL__
+/*
+ * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
+ *
+ * Grabbed from Open Firmware definitions on a PowerBook G3 Series
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+
+/* Front light color on Yikes/B&W G3. 32 bits */
+#define HEATHROW_FRONT_LIGHT		0x32 /* (set to 0 or 0xffffffff) */
+
+/* Brightness/contrast (gossamer iMac ?). 8 bits */
+#define HEATHROW_BRIGHTNESS_CNTL	0x32
+#define HEATHROW_CONTRAST_CNTL		0x33
+
+/* offset from ohare base for feature control register */
+#define HEATHROW_MBCR			0x34	/* Media bay control */
+#define HEATHROW_FCR			0x38	/* Feature control */
+#define HEATHROW_AUX_CNTL_REG		0x3c	/* Aux control */
+
+/*
+ * Bits in feature control register.
+ * Bits postfixed with a _N are in inverse logic
+ */
+#define HRW_SCC_TRANS_EN_N	0x00000001	/* Also controls modem power */
+#define HRW_BAY_POWER_N		0x00000002
+#define HRW_BAY_PCI_ENABLE	0x00000004
+#define HRW_BAY_IDE_ENABLE	0x00000008
+#define HRW_BAY_FLOPPY_ENABLE	0x00000010
+#define HRW_IDE0_ENABLE		0x00000020
+#define HRW_IDE0_RESET_N	0x00000040
+#define HRW_BAY_DEV_MASK	0x0000001c
+#define HRW_BAY_RESET_N		0x00000080
+#define HRW_IOBUS_ENABLE	0x00000100	/* Internal IDE ? */
+#define HRW_SCC_ENABLE		0x00000200
+#define HRW_MESH_ENABLE		0x00000400
+#define HRW_SWIM_ENABLE		0x00000800
+#define HRW_SOUND_POWER_N	0x00001000
+#define HRW_SOUND_CLK_ENABLE	0x00002000
+#define HRW_SCCA_IO		0x00004000
+#define HRW_SCCB_IO		0x00008000
+#define HRW_PORT_OR_DESK_VIA_N	0x00010000	/* This one is 0 on PowerBook */
+#define HRW_PWM_MON_ID_N	0x00020000	/* ??? (0) */
+#define HRW_HOOK_MB_CNT_N	0x00040000	/* ??? (0) */
+#define HRW_SWIM_CLONE_FLOPPY	0x00080000	/* ??? (0) */
+#define HRW_AUD_RUN22		0x00100000	/* ??? (1) */
+#define HRW_SCSI_LINK_MODE	0x00200000	/* Read ??? (1) */
+#define HRW_ARB_BYPASS		0x00400000	/* Disable internal PCI arbitrer */
+#define HRW_IDE1_RESET_N	0x00800000	/* Media bay */
+#define HRW_SLOW_SCC_PCLK	0x01000000	/* ??? (0) */
+#define HRW_RESET_SCC		0x02000000
+#define HRW_MFDC_CELL_ENABLE	0x04000000	/* ??? (0) */
+#define HRW_USE_MFDC		0x08000000	/* ??? (0) */
+#define HRW_BMAC_IO_ENABLE	0x60000000	/* two bits, not documented in OF */
+#define HRW_BMAC_RESET		0x80000000	/* not documented in OF */
+
+/* We OR those features at boot on desktop G3s */
+#define HRW_DEFAULTS		(HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
+
+/* Looks like Heathrow has some sort of GPIOs as well... */
+#define HRW_GPIO_MODEM_RESET	0x6d
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HEATHROW_H */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
new file mode 100644
index 00000000000..5d99b6489d5
--- /dev/null
+++ b/arch/powerpc/include/asm/highmem.h
@@ -0,0 +1,138 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/fixmap.h>
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP 	(1 << PTE_SHIFT)
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_BASE	((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+	might_sleep();
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+	set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
+	flush_tlb_page(NULL, vaddr);
+
+	return (void*) vaddr;
+}
+
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+	return kmap_atomic_prot(page, type, kmap_prot);
+}
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+		pagefault_enable();
+		return;
+	}
+
+	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(&init_mm, vaddr, kmap_pte-idx);
+	flush_tlb_page(NULL, vaddr);
+#endif
+	pagefault_enable();
+}
+
+static inline struct page *kmap_atomic_to_page(void *ptr)
+{
+	unsigned long idx, vaddr = (unsigned long) ptr;
+	pte_t *pte;
+
+	if (vaddr < FIXADDR_START)
+		return virt_to_page(ptr);
+
+	idx = virt_to_fix(vaddr);
+	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
+	return pte_page(*pte);
+}
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
new file mode 100644
index 00000000000..26f0d0ab27a
--- /dev/null
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_HUGETLB_H
+#define _ASM_POWERPC_HUGETLB_H
+
+#include <asm/page.h>
+
+
+int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
+			   unsigned long len);
+
+void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
+			    unsigned long end, unsigned long floor,
+			    unsigned long ceiling);
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep);
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (addr & ~huge_page_mask(h))
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
+{
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
new file mode 100644
index 00000000000..6251a4b10be
--- /dev/null
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -0,0 +1,318 @@
+#ifndef _ASM_POWERPC_HVCALL_H
+#define _ASM_POWERPC_HVCALL_H
+#ifdef __KERNEL__
+
+#define HVSC			.long 0x44000022
+
+#define H_SUCCESS	0
+#define H_BUSY		1	/* Hardware busy -- retry later */
+#define H_CLOSED	2	/* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED	4	/* Resource request constrained to max allowed */
+#define H_PARTIAL       5
+#define H_IN_PROGRESS	14	/* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE   16
+#define H_PENDING	17	/* returned from H_POLL_PENDING */
+#define H_CONTINUE	18	/* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE		9900  /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC	9900  /* Long busy, hint that 1msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC	9901  /* Long busy, hint that 10msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 	9902  /* Long busy, hint that 100msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC		9903  /* Long busy, hint that 1sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC	9904  /* Long busy, hint that 10sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC	9905  /* Long busy, hint that 100sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_END_RANGE		9905  /* End of long busy range */
+#define H_HARDWARE	-1	/* Hardware error */
+#define H_FUNCTION	-2	/* Function not supported */
+#define H_PRIVILEGE	-3	/* Caller not privileged */
+#define H_PARAMETER	-4	/* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE	-5	/* Illegal msr value */
+#define H_PTEG_FULL	-6	/* PTEG is full */
+#define H_NOT_FOUND	-7	/* PTE was not found" */
+#define H_RESERVED_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM	-9
+#define H_AUTHORITY	-10
+#define H_PERMISSION	-11
+#define H_DROPPED	-12
+#define H_SOURCE_PARM	-13
+#define H_DEST_PARM	-14
+#define H_REMOTE_PARM	-15
+#define H_RESOURCE	-16
+#define H_ADAPTER_PARM  -17
+#define H_RH_PARM       -18
+#define H_RCQ_PARM      -19
+#define H_SCQ_PARM      -20
+#define H_EQ_PARM       -21
+#define H_RT_PARM       -22
+#define H_ST_PARM       -23
+#define H_SIGT_PARM     -24
+#define H_TOKEN_PARM    -25
+#define H_MLENGTH_PARM  -27
+#define H_MEM_PARM      -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM     -30
+#define H_PORT_PARM     -31
+#define H_MCG_PARM      -32
+#define H_VL_PARM       -33
+#define H_TSIZE_PARM    -34
+#define H_TRACE_PARM    -35
+
+#define H_MASK_PARM     -37
+#define H_MCG_FULL      -38
+#define H_ALIAS_EXIST   -39
+#define H_P_COUNTER     -40
+#define H_TABLE_FULL    -41
+#define H_ALT_TABLE     -42
+#define H_MR_CONDITION  -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE       -45
+#define H_RESCINDEND    -46
+
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later.  This prevents calls blocking in the
+ * firmware for long periods of time.  Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying.  If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
+			     && (x <= H_LONG_BUSY_END_RANGE))
+
+/* Flags */
+#define H_LARGE_PAGE		(1UL<<(63-16))
+#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE	(1UL<<(63-28))
+#define H_PAGE_UNUSED		((1UL<<(63-29)) | (1UL<<(63-30)))
+#define H_PAGE_SET_UNUSED	(H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED	(H_PAGE_SET_UNUSED | (1UL<<(63-31)))
+#define H_PAGE_SET_ACTIVE	H_PAGE_STATE_CHANGE
+#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
+#define H_ANDCOND		(1UL<<(63-33))
+#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE		(1UL<<(63-49))
+#define H_N			(1UL<<(63-61))
+#define H_PP1			(1UL<<(63-62))
+#define H_PP2			(1UL<<(63-63))
+
+/* VASI States */
+#define H_VASI_INVALID          0
+#define H_VASI_ENABLED          1
+#define H_VASI_ABORTED          2
+#define H_VASI_SUSPENDING       3
+#define H_VASI_SUSPENDED        4
+#define H_VASI_RESUMED          5
+#define H_VASI_COMPLETED        6
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
+#define H_DABRX_KERNEL		(1UL<<(63-62))
+#define H_DABRX_USER		(1UL<<(63-63))
+
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT          4096
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE		0x04
+#define H_ENTER			0x08
+#define H_READ			0x0c
+#define H_CLEAR_MOD		0x10
+#define H_CLEAR_REF		0x14
+#define H_PROTECT		0x18
+#define H_GET_TCE		0x1c
+#define H_PUT_TCE		0x20
+#define H_SET_SPRG0		0x24
+#define H_SET_DABR		0x28
+#define H_PAGE_INIT		0x2c
+#define H_SET_ASR		0x30
+#define H_ASR_ON		0x34
+#define H_ASR_OFF		0x38
+#define H_LOGICAL_CI_LOAD	0x3c
+#define H_LOGICAL_CI_STORE	0x40
+#define H_LOGICAL_CACHE_LOAD	0x44
+#define H_LOGICAL_CACHE_STORE	0x48
+#define H_LOGICAL_ICBI		0x4c
+#define H_LOGICAL_DCBF		0x50
+#define H_GET_TERM_CHAR		0x54
+#define H_PUT_TERM_CHAR		0x58
+#define H_REAL_TO_LOGICAL	0x5c
+#define H_HYPERVISOR_DATA	0x60
+#define H_EOI			0x64
+#define H_CPPR			0x68
+#define H_IPI			0x6c
+#define H_IPOLL			0x70
+#define H_XIRR			0x74
+#define H_PERFMON		0x7c
+#define H_MIGRATE_DMA		0x78
+#define H_REGISTER_VPA		0xDC
+#define H_CEDE			0xE0
+#define H_CONFER		0xE4
+#define H_PROD			0xE8
+#define H_GET_PPP		0xEC
+#define H_SET_PPP		0xF0
+#define H_PURR			0xF4
+#define H_PIC			0xF8
+#define H_REG_CRQ		0xFC
+#define H_FREE_CRQ		0x100
+#define H_VIO_SIGNAL		0x104
+#define H_SEND_CRQ		0x108
+#define H_COPY_RDMA		0x110
+#define H_REGISTER_LOGICAL_LAN	0x114
+#define H_FREE_LOGICAL_LAN	0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN	0x120
+#define H_BULK_REMOVE		0x124
+#define H_MULTICAST_CTRL	0x130
+#define H_SET_XDABR		0x134
+#define H_STUFF_TCE		0x138
+#define H_PUT_TCE_INDIRECT	0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_VTERM_PARTNER_INFO	0x150
+#define H_REGISTER_VTERM	0x154
+#define H_FREE_VTERM		0x158
+#define H_RESET_EVENTS          0x15C
+#define H_ALLOC_RESOURCE        0x160
+#define H_FREE_RESOURCE         0x164
+#define H_MODIFY_QP             0x168
+#define H_QUERY_QP              0x16C
+#define H_REREGISTER_PMR        0x170
+#define H_REGISTER_SMR          0x174
+#define H_QUERY_MR              0x178
+#define H_QUERY_MW              0x17C
+#define H_QUERY_HCA             0x180
+#define H_QUERY_PORT            0x184
+#define H_MODIFY_PORT           0x188
+#define H_DEFINE_AQP1           0x18C
+#define H_GET_TRACE_BUFFER      0x190
+#define H_DEFINE_AQP0           0x194
+#define H_RESIZE_MR             0x198
+#define H_ATTACH_MCQP           0x19C
+#define H_DETACH_MCQP           0x1A0
+#define H_CREATE_RPT            0x1A4
+#define H_REMOVE_RPT            0x1A8
+#define H_REGISTER_RPAGES       0x1AC
+#define H_DISABLE_AND_GETC      0x1B0
+#define H_ERROR_DATA            0x1B4
+#define H_GET_HCA_INFO          0x1B8
+#define H_GET_PERF_COUNT        0x1BC
+#define H_MANAGE_TRACE          0x1C0
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE       0x1E4
+#define H_POLL_PENDING		0x1D8
+#define H_ILLAN_ATTRIBUTES	0x244
+#define H_JOIN			0x298
+#define H_VASI_STATE            0x2A4
+#define H_ENABLE_CRQ		0x2B0
+#define H_SET_MPP		0x2D0
+#define H_GET_MPP		0x2D4
+#define MAX_HCALL_OPCODE	H_GET_MPP
+
+#ifndef __ASSEMBLY__
+
+/**
+ * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
+ * @opcode: The hypervisor call to make.
+ *
+ * This call supports up to 7 arguments and only returns the status of
+ * the hcall. Use this version where possible, its slightly faster than
+ * the other plpar_hcalls.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+
+/**
+ * plpar_hcall: - Make a pseries hypervisor call
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
+ */
+#define PLPAR_HCALL_BUFSIZE 4
+long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used when phyp interface needs to be called in real mode. Similar to
+ * plpar_hcall, but plpar_hcall_raw works in real mode and does not
+ * calculate hypervisor call statistics.
+ */
+long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 9 return arguments in.
+ *
+ * This call supports up to 9 arguments and 9 return arguments. Use
+ * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
+ */
+#define PLPAR_HCALL9_BUFSIZE 9
+long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
+
+/* For hcall instrumentation.  One structure per-hcall, per-CPU */
+struct hcall_stats {
+	unsigned long	num_calls;	/* number of calls (on this CPU) */
+	unsigned long	tb_total;	/* total wall time (mftb) of calls. */
+	unsigned long	purr_total;	/* total cpu time (PURR) of calls. */
+};
+#define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
+
+struct hvcall_mpp_data {
+	unsigned long entitled_mem;
+	unsigned long mapped_mem;
+	unsigned short group_num;
+	unsigned short pool_num;
+	unsigned char mem_weight;
+	unsigned char unallocated_mem_weight;
+	unsigned long unallocated_entitlement;  /* value in bytes */
+	unsigned long pool_size;
+	signed long loan_request;
+	unsigned long backing_mem;
+};
+
+int h_get_mpp(struct hvcall_mpp_data *);
+
+#ifdef CONFIG_PPC_PSERIES
+extern int CMO_PrPSP;
+extern int CMO_SecPSP;
+extern unsigned long CMO_PageSize;
+
+static inline int cmo_get_primary_psp(void)
+{
+	return CMO_PrPSP;
+}
+
+static inline int cmo_get_secondary_psp(void)
+{
+	return CMO_SecPSP;
+}
+
+static inline unsigned long cmo_get_page_size(void)
+{
+	return CMO_PageSize;
+}
+#endif /* CONFIG_PPC_PSERIES */
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/arch/powerpc/include/asm/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h
new file mode 100644
index 00000000000..35ea69e8121
--- /dev/null
+++ b/arch/powerpc/include/asm/hvconsole.h
@@ -0,0 +1,41 @@
+/*
+ * hvconsole.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * LPAR console support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCONSOLE_H
+#define _PPC64_HVCONSOLE_H
+#ifdef __KERNEL__
+
+/*
+ * PSeries firmware will only send/recv up to 16 bytes of character data per
+ * hcall.
+ */
+#define MAX_VIO_PUT_CHARS	16
+#define SIZE_VIO_GET_CHARS	16
+
+/*
+ * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars.  The 'count'
+ * parm is included to conform to put_chars() function pointer template
+ */
+extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
+extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_HVCONSOLE_H */
diff --git a/arch/powerpc/include/asm/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h
new file mode 100644
index 00000000000..67d7da3a4da
--- /dev/null
+++ b/arch/powerpc/include/asm/hvcserver.h
@@ -0,0 +1,59 @@
+/*
+ * hvcserver.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * PPC64 virtual I/O console server support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCSERVER_H
+#define _PPC64_HVCSERVER_H
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+
+/* Converged Location Code length */
+#define HVCS_CLC_LENGTH	79
+
+/**
+ * hvcs_partner_info - an element in a list of partner info
+ * @node: list_head denoting this partner_info struct's position in the list of
+ *	partner info.
+ * @unit_address: The partner unit address of this entry.
+ * @partition_ID: The partner partition ID of this entry.
+ * @location_code: The converged location code of this entry + 1 char for the
+ *	null-term.
+ *
+ * This structure outlines the format that partner info is presented to a caller
+ * of the hvcs partner info fetching functions.  These are strung together into
+ * a list using linux kernel lists.
+ */
+struct hvcs_partner_info {
+	struct list_head node;
+	uint32_t unit_address;
+	uint32_t partition_ID;
+	char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */
+};
+
+extern int hvcs_free_partner_info(struct list_head *head);
+extern int hvcs_get_partner_info(uint32_t unit_address,
+		struct list_head *head, unsigned long *pi_buff);
+extern int hvcs_register_connection(uint32_t unit_address,
+		uint32_t p_partition_ID, uint32_t p_unit_address);
+extern int hvcs_free_connection(uint32_t unit_address);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_HVCSERVER_H */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
new file mode 100644
index 00000000000..f75a5fc64d2
--- /dev/null
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef _ASM_POWERPC_HW_IRQ_H
+#define _ASM_POWERPC_HW_IRQ_H
+
+#ifdef __KERNEL__
+
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+
+extern void timer_interrupt(struct pt_regs *);
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+
+static inline unsigned long local_get_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__("lbz %0,%1(13)"
+	: "=r" (flags)
+	: "i" (offsetof(struct paca_struct, soft_enabled)));
+
+	return flags;
+}
+
+static inline unsigned long raw_local_irq_disable(void)
+{
+	unsigned long flags, zero;
+
+	__asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)"
+	: "=r" (flags), "=&r" (zero)
+	: "i" (offsetof(struct paca_struct, soft_enabled))
+	: "memory");
+
+	return flags;
+}
+
+extern void raw_local_irq_restore(unsigned long);
+extern void iseries_handle_interrupts(void);
+
+#define raw_local_irq_enable()		raw_local_irq_restore(1)
+#define raw_local_save_flags(flags)	((flags) = local_get_flags())
+#define raw_local_irq_save(flags)	((flags) = raw_local_irq_disable())
+
+#define raw_irqs_disabled()		(local_get_flags() == 0)
+#define raw_irqs_disabled_flags(flags)	((flags) == 0)
+
+#define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
+#define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
+
+#define  hard_irq_disable()			\
+	do {					\
+		__hard_irq_disable();		\
+		get_paca()->soft_enabled = 0;	\
+		get_paca()->hard_enabled = 0;	\
+	} while(0)
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	return flags == 0;
+}
+
+#else
+
+#if defined(CONFIG_BOOKE)
+#define SET_MSR_EE(x)	mtmsr(x)
+#define local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#else
+#define SET_MSR_EE(x)	mtmsr(x)
+#define local_irq_restore(flags)	mtmsr(flags)
+#endif
+
+static inline void local_irq_disable(void)
+{
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
+	unsigned long msr;
+	__asm__ __volatile__("": : :"memory");
+	msr = mfmsr();
+	SET_MSR_EE(msr & ~MSR_EE);
+#endif
+}
+
+static inline void local_irq_enable(void)
+{
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 1": : :"memory");
+#else
+	unsigned long msr;
+	__asm__ __volatile__("": : :"memory");
+	msr = mfmsr();
+	SET_MSR_EE(msr | MSR_EE);
+#endif
+}
+
+static inline void local_irq_save_ptr(unsigned long *flags)
+{
+	unsigned long msr;
+	msr = mfmsr();
+	*flags = msr;
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
+	SET_MSR_EE(msr & ~MSR_EE);
+#endif
+	__asm__ __volatile__("": : :"memory");
+}
+
+#define local_save_flags(flags)	((flags) = mfmsr())
+#define local_irq_save(flags)	local_irq_save_ptr(&flags)
+#define irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+
+#define hard_irq_enable()	local_irq_enable()
+#define hard_irq_disable()	local_irq_disable()
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	return (flags & MSR_EE) == 0;
+}
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * interrupt-retrigger: should we handle this via lost interrupts and IPIs
+ * or should we not care like we do now ? --BenH.
+ */
+struct hw_interrupt_type;
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h
new file mode 100644
index 00000000000..1ad4eed07fb
--- /dev/null
+++ b/arch/powerpc/include/asm/hydra.h
@@ -0,0 +1,102 @@
+/*
+ *  include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is based on the following documentation:
+ *
+ *	Macintosh Technology in the Common Hardware Reference Platform
+ *	Apple Computer, Inc.
+ *
+ *	© Copyright 1995 Apple Computer, Inc. All rights reserved.
+ *
+ *  It's available online from http://chrp.apple.com/MacTech.pdf.
+ *  You can obtain paper copies of this book from computer bookstores or by
+ *  writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
+ *  Francisco, CA 94104. Reference ISBN 1-55860-393-X.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _ASMPPC_HYDRA_H
+#define _ASMPPC_HYDRA_H
+
+#ifdef __KERNEL__
+
+struct Hydra {
+    /* DBDMA Controller Register Space */
+    char Pad1[0x30];
+    u_int CachePD;
+    u_int IDs;
+    u_int Feature_Control;
+    char Pad2[0x7fc4];
+    /* DBDMA Channel Register Space */
+    char SCSI_DMA[0x100];
+    char Pad3[0x300];
+    char SCCA_Tx_DMA[0x100];
+    char SCCA_Rx_DMA[0x100];
+    char SCCB_Tx_DMA[0x100];
+    char SCCB_Rx_DMA[0x100];
+    char Pad4[0x7800];
+    /* Device Register Space */
+    char SCSI[0x1000];
+    char ADB[0x1000];
+    char SCC_Legacy[0x1000];
+    char SCC[0x1000];
+    char Pad9[0x2000];
+    char VIA[0x2000];
+    char Pad10[0x28000];
+    char OpenPIC[0x40000];
+};
+
+extern volatile struct Hydra __iomem *Hydra;
+
+
+    /*
+     *  Feature Control Register
+     */
+
+#define HYDRA_FC_SCC_CELL_EN	0x00000001	/* Enable SCC Clock */
+#define HYDRA_FC_SCSI_CELL_EN	0x00000002	/* Enable SCSI Clock */
+#define HYDRA_FC_SCCA_ENABLE	0x00000004	/* Enable SCC A Lines */
+#define HYDRA_FC_SCCB_ENABLE	0x00000008	/* Enable SCC B Lines */
+#define HYDRA_FC_ARB_BYPASS	0x00000010	/* Bypass Internal Arbiter */
+#define HYDRA_FC_RESET_SCC	0x00000020	/* Reset SCC */
+#define HYDRA_FC_MPIC_ENABLE	0x00000040	/* Enable OpenPIC */
+#define HYDRA_FC_SLOW_SCC_PCLK	0x00000080	/* 1=15.6672, 0=25 MHz */
+#define HYDRA_FC_MPIC_IS_MASTER	0x00000100	/* OpenPIC Master Mode */
+
+
+    /*
+     *  OpenPIC Interrupt Sources
+     */
+
+#define HYDRA_INT_SIO		0
+#define HYDRA_INT_SCSI_DMA	1
+#define HYDRA_INT_SCCA_TX_DMA	2
+#define HYDRA_INT_SCCA_RX_DMA	3
+#define HYDRA_INT_SCCB_TX_DMA	4
+#define HYDRA_INT_SCCB_RX_DMA	5
+#define HYDRA_INT_SCSI		6
+#define HYDRA_INT_SCCA		7
+#define HYDRA_INT_SCCB		8
+#define HYDRA_INT_VIA		9
+#define HYDRA_INT_ADB		10
+#define HYDRA_INT_ADB_NMI	11
+#define HYDRA_INT_EXT1		12	/* PCI IRQW */
+#define HYDRA_INT_EXT2		13	/* PCI IRQX */
+#define HYDRA_INT_EXT3		14	/* PCI IRQY */
+#define HYDRA_INT_EXT4		15	/* PCI IRQZ */
+#define HYDRA_INT_EXT5		16	/* IDE Primay/Secondary */
+#define HYDRA_INT_EXT6		17	/* IDE Secondary */
+#define HYDRA_INT_EXT7		18	/* Power Off Request */
+#define HYDRA_INT_SPARE		19
+
+extern int hydra_init(void);
+extern void macio_adb_init(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASMPPC_HYDRA_H */
diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h
new file mode 100644
index 00000000000..105ade297aa
--- /dev/null
+++ b/arch/powerpc/include/asm/i8259.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_I8259_H
+#define _ASM_POWERPC_I8259_H
+#ifdef __KERNEL__
+
+#include <linux/irq.h>
+
+extern void i8259_init(struct device_node *node, unsigned long intack_addr);
+extern unsigned int i8259_irq(void);
+extern struct irq_host *i8259_get_host(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_I8259_H */
diff --git a/arch/powerpc/include/asm/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h
new file mode 100644
index 00000000000..1a9d9aea21f
--- /dev/null
+++ b/arch/powerpc/include/asm/ibmebus.h
@@ -0,0 +1,60 @@
+/*
+ * IBM PowerPC eBus Infrastructure Support.
+ *
+ * Copyright (c) 2005 IBM Corporation
+ *  Joachim Fenkes <fenkes@de.ibm.com>
+ *  Heiko J Schick <schickhj@de.ibm.com>
+ *
+ * All rights reserved.
+ *
+ * This source code is distributed under a dual license of GPL v2.0 and OpenIB
+ * BSD.
+ *
+ * OpenIB BSD License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_EBUS_H
+#define _ASM_EBUS_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+extern struct bus_type ibmebus_bus_type;
+
+int ibmebus_register_driver(struct of_platform_driver *drv);
+void ibmebus_unregister_driver(struct of_platform_driver *drv);
+
+int ibmebus_request_irq(u32 ist, irq_handler_t handler,
+			unsigned long irq_flags, const char *devname,
+			void *dev_id);
+void ibmebus_free_irq(u32 ist, void *dev_id);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IBMEBUS_H */
diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h
new file mode 100644
index 00000000000..da01b20aea5
--- /dev/null
+++ b/arch/powerpc/include/asm/ide.h
@@ -0,0 +1,17 @@
+/*
+ *  Copyright (C) 1994-1996 Linus Torvalds & authors
+ *
+ *  This file contains the powerpc architecture specific IDE code.
+ */
+#ifndef _ASM_POWERPC_IDE_H
+#define _ASM_POWERPC_IDE_H
+
+#include <linux/compiler.h>
+#include <asm/io.h>
+
+#define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
+#define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
+
+#endif /* _ASM_POWERPC_IDE_H */
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
new file mode 100644
index 00000000000..0f165e59c32
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -0,0 +1,156 @@
+/**
+ * MPC86xx Internal Memory Map
+ *
+ * Authors: Jeff Brown
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2004,2007 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This header file defines structures for various 86xx SOC devices that are
+ * used by multiple source files.
+ */
+
+#ifndef __ASM_POWERPC_IMMAP_86XX_H__
+#define __ASM_POWERPC_IMMAP_86XX_H__
+#ifdef __KERNEL__
+
+/* Global Utility Registers */
+struct ccsr_guts {
+	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
+	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
+	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
+	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
+	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
+	u8	res1[0x20 - 0x14];
+	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
+	u8	res2[0x30 - 0x24];
+	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
+	u8	res3[0x40 - 0x34];
+	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
+	u8	res4[0x50 - 0x44];
+	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
+	u8	res5[0x60 - 0x54];
+	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
+	u8	res6[0x70 - 0x64];
+	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
+	u8	res7[0x80 - 0x78];
+	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
+	u8	res8[0x90 - 0x84];
+	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
+	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
+	u8	res9[0xA0 - 0x98];
+	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
+	__be32	svr;		/* 0x.00a4 - System Version Register */
+	u8	res10[0xB0 - 0xA8];
+	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
+	u8	res11[0xC0 - 0xB4];
+	__be32	elbcvselcr;	/* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
+	u8	res12[0x800 - 0xC4];
+	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
+	u8	res13[0x900 - 0x804];
+	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
+	u8	res14[0x908 - 0x904];
+	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
+	u8	res15[0x914 - 0x90C];
+	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
+	u8	res16[0xB20 - 0x918];
+	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
+	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
+	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
+	u8	res17[0xE00 - 0xB2C];
+	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
+	u8	res18[0xE10 - 0xE04];
+	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
+	u8	res19[0xE20 - 0xE14];
+	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
+	u8	res20[0xF04 - 0xE24];
+	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
+	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
+	u8	res21[0xF40 - 0xF0C];
+	__be32	srds2cr0;	/* 0x.0f40 - SerDes1 Control Register 0 */
+	__be32	srds2cr1;	/* 0x.0f44 - SerDes1 Control Register 0 */
+} __attribute__ ((packed));
+
+#define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
+#define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */
+
+/*
+ * Set the DMACR register in the GUTS
+ *
+ * The DMACR register determines the source of initiated transfers for each
+ * channel on each DMA controller.  Rather than have a bunch of repetitive
+ * macros for the bit patterns, we just have a function that calculates
+ * them.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
+ */
+static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
+	unsigned int co, unsigned int ch, unsigned int device)
+{
+	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
+
+	clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
+}
+
+#define CCSR_GUTS_PMUXCR_LDPSEL		0x00010000
+#define CCSR_GUTS_PMUXCR_SSI1_MASK	0x0000C000	/* Bitmask for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI1_LA	0x00000000	/* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI1_HI	0x00004000	/* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI1_SSI	0x00008000	/* Used for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI2_MASK	0x00003000	/* Bitmask for SSI2 */
+#define CCSR_GUTS_PMUXCR_SSI2_LA	0x00000000	/* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI2_HI	0x00001000	/* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI2_SSI	0x00002000	/* Used for SSI2 */
+#define CCSR_GUTS_PMUXCR_LA_22_25_LA	0x00000000	/* Latched Address */
+#define CCSR_GUTS_PMUXCR_LA_22_25_HI	0x00000400	/* High impedance */
+#define CCSR_GUTS_PMUXCR_DBGDRV		0x00000200	/* Signals not driven */
+#define CCSR_GUTS_PMUXCR_DMA2_0		0x00000008
+#define CCSR_GUTS_PMUXCR_DMA2_3		0x00000004
+#define CCSR_GUTS_PMUXCR_DMA1_0		0x00000002
+#define CCSR_GUTS_PMUXCR_DMA1_3		0x00000001
+
+/*
+ * Set the DMA external control bits in the GUTS
+ *
+ * The DMA external control bits in the PMUXCR are only meaningful for
+ * channels 0 and 3.  Any other channels are ignored.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * value: the new value for the bit (0 or 1)
+ */
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
+	unsigned int co, unsigned int ch, unsigned int value)
+{
+	if ((ch == 0) || (ch == 3)) {
+		unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
+
+		clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
+	}
+}
+
+#define CCSR_GUTS_CLKDVDR_PXCKEN	0x80000000
+#define CCSR_GUTS_CLKDVDR_SSICKEN	0x20000000
+#define CCSR_GUTS_CLKDVDR_PXCKINV	0x10000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK	0x06000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
+	(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
+#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT	16
+#define CCSR_GUTS_CLKDVDR_PXCLK_MASK	0x001F0000
+#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
+#define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
+#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
+
+#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h
new file mode 100644
index 00000000000..4080bab0468
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_cpm2.h
@@ -0,0 +1,650 @@
+/*
+ * CPM2 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * The Internal Memory Map for devices with CPM2 on them.  This
+ * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
+ * 8560).
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_CPM2__
+#define __IMMAP_CPM2__
+
+#include <linux/types.h>
+
+/* System configuration registers.
+*/
+typedef	struct sys_82xx_conf {
+	u32	sc_siumcr;
+	u32	sc_sypcr;
+	u8	res1[6];
+	u16	sc_swsr;
+	u8	res2[20];
+	u32	sc_bcr;
+	u8	sc_ppc_acr;
+	u8	res3[3];
+	u32	sc_ppc_alrh;
+	u32	sc_ppc_alrl;
+	u8	sc_lcl_acr;
+	u8	res4[3];
+	u32	sc_lcl_alrh;
+	u32	sc_lcl_alrl;
+	u32	sc_tescr1;
+	u32	sc_tescr2;
+	u32	sc_ltescr1;
+	u32	sc_ltescr2;
+	u32	sc_pdtea;
+	u8	sc_pdtem;
+	u8	res5[3];
+	u32	sc_ldtea;
+	u8	sc_ldtem;
+	u8	res6[163];
+} sysconf_82xx_cpm2_t;
+
+typedef	struct sys_85xx_conf {
+	u32	sc_cear;
+	u16	sc_ceer;
+	u16	sc_cemr;
+	u8	res1[70];
+	u32	sc_smaer;
+	u8	res2[4];
+	u32	sc_smevr;
+	u32	sc_smctr;
+	u32	sc_lmaer;
+	u8	res3[4];
+	u32	sc_lmevr;
+	u32	sc_lmctr;
+	u8	res4[144];
+} sysconf_85xx_cpm2_t;
+
+typedef union sys_conf {
+	sysconf_82xx_cpm2_t	siu_82xx;
+	sysconf_85xx_cpm2_t	siu_85xx;
+} sysconf_cpm2_t;
+
+
+
+/* Memory controller registers.
+*/
+typedef struct	mem_ctlr {
+	u32	memc_br0;
+	u32	memc_or0;
+	u32	memc_br1;
+	u32	memc_or1;
+	u32	memc_br2;
+	u32	memc_or2;
+	u32	memc_br3;
+	u32	memc_or3;
+	u32	memc_br4;
+	u32	memc_or4;
+	u32	memc_br5;
+	u32	memc_or5;
+	u32	memc_br6;
+	u32	memc_or6;
+	u32	memc_br7;
+	u32	memc_or7;
+	u32	memc_br8;
+	u32	memc_or8;
+	u32	memc_br9;
+	u32	memc_or9;
+	u32	memc_br10;
+	u32	memc_or10;
+	u32	memc_br11;
+	u32	memc_or11;
+	u8	res1[8];
+	u32	memc_mar;
+	u8	res2[4];
+	u32	memc_mamr;
+	u32	memc_mbmr;
+	u32	memc_mcmr;
+	u8	res3[8];
+	u16	memc_mptpr;
+	u8	res4[2];
+	u32	memc_mdr;
+	u8	res5[4];
+	u32	memc_psdmr;
+	u32	memc_lsdmr;
+	u8	memc_purt;
+	u8	res6[3];
+	u8	memc_psrt;
+	u8	res7[3];
+	u8	memc_lurt;
+	u8	res8[3];
+	u8	memc_lsrt;
+	u8	res9[3];
+	u32	memc_immr;
+	u32	memc_pcibr0;
+	u32	memc_pcibr1;
+	u8	res10[16];
+	u32	memc_pcimsk0;
+	u32	memc_pcimsk1;
+	u8	res11[52];
+} memctl_cpm2_t;
+
+/* System Integration Timers.
+*/
+typedef struct	sys_int_timers {
+	u8	res1[32];
+	u16	sit_tmcntsc;
+	u8	res2[2];
+	u32	sit_tmcnt;
+	u8	res3[4];
+	u32	sit_tmcntal;
+	u8	res4[16];
+	u16	sit_piscr;
+	u8	res5[2];
+	u32	sit_pitc;
+	u32	sit_pitr;
+	u8      res6[94];
+	u8	res7[390];
+} sit_cpm2_t;
+
+#define PISCR_PIRQ_MASK		((u16)0xff00)
+#define PISCR_PS		((u16)0x0080)
+#define PISCR_PIE		((u16)0x0004)
+#define PISCR_PTF		((u16)0x0002)
+#define PISCR_PTE		((u16)0x0001)
+
+/* PCI Controller.
+*/
+typedef struct pci_ctlr {
+	u32	pci_omisr;
+	u32	pci_omimr;
+	u8	res1[8];
+	u32	pci_ifqpr;
+	u32	pci_ofqpr;
+	u8	res2[8];
+	u32	pci_imr0;
+	u32	pci_imr1;
+	u32	pci_omr0;
+	u32	pci_omr1;
+	u32	pci_odr;
+	u8	res3[4];
+	u32	pci_idr;
+	u8	res4[20];
+	u32	pci_imisr;
+	u32	pci_imimr;
+	u8	res5[24];
+	u32	pci_ifhpr;
+	u8	res6[4];
+	u32	pci_iftpr;
+	u8	res7[4];
+	u32	pci_iphpr;
+	u8	res8[4];
+	u32	pci_iptpr;
+	u8	res9[4];
+	u32	pci_ofhpr;
+	u8	res10[4];
+	u32	pci_oftpr;
+	u8	res11[4];
+	u32	pci_ophpr;
+	u8	res12[4];
+	u32	pci_optpr;
+	u8	res13[8];
+	u32	pci_mucr;
+	u8	res14[8];
+	u32	pci_qbar;
+	u8	res15[12];
+	u32	pci_dmamr0;
+	u32	pci_dmasr0;
+	u32	pci_dmacdar0;
+	u8	res16[4];
+	u32	pci_dmasar0;
+	u8	res17[4];
+	u32	pci_dmadar0;
+	u8	res18[4];
+	u32	pci_dmabcr0;
+	u32	pci_dmandar0;
+	u8	res19[86];
+	u32	pci_dmamr1;
+	u32	pci_dmasr1;
+	u32	pci_dmacdar1;
+	u8	res20[4];
+	u32	pci_dmasar1;
+	u8	res21[4];
+	u32	pci_dmadar1;
+	u8	res22[4];
+	u32	pci_dmabcr1;
+	u32	pci_dmandar1;
+	u8	res23[88];
+	u32	pci_dmamr2;
+	u32	pci_dmasr2;
+	u32	pci_dmacdar2;
+	u8	res24[4];
+	u32	pci_dmasar2;
+	u8	res25[4];
+	u32	pci_dmadar2;
+	u8	res26[4];
+	u32	pci_dmabcr2;
+	u32	pci_dmandar2;
+	u8	res27[88];
+	u32	pci_dmamr3;
+	u32	pci_dmasr3;
+	u32	pci_dmacdar3;
+	u8	res28[4];
+	u32	pci_dmasar3;
+	u8	res29[4];
+	u32	pci_dmadar3;
+	u8	res30[4];
+	u32	pci_dmabcr3;
+	u32	pci_dmandar3;
+	u8	res31[344];
+	u32	pci_potar0;
+	u8	res32[4];
+	u32	pci_pobar0;
+	u8	res33[4];
+	u32	pci_pocmr0;
+	u8	res34[4];
+	u32	pci_potar1;
+	u8	res35[4];
+	u32	pci_pobar1;
+	u8	res36[4];
+	u32	pci_pocmr1;
+	u8	res37[4];
+	u32	pci_potar2;
+	u8	res38[4];
+	u32	pci_pobar2;
+	u8	res39[4];
+	u32	pci_pocmr2;
+	u8	res40[50];
+	u32	pci_ptcr;
+	u32	pci_gpcr;
+	u32	pci_gcr;
+	u32	pci_esr;
+	u32	pci_emr;
+	u32	pci_ecr;
+	u32	pci_eacr;
+	u8	res41[4];
+	u32	pci_edcr;
+	u8	res42[4];
+	u32	pci_eccr;
+	u8	res43[44];
+	u32	pci_pitar1;
+	u8	res44[4];
+	u32	pci_pibar1;
+	u8	res45[4];
+	u32	pci_picmr1;
+	u8	res46[4];
+	u32	pci_pitar0;
+	u8	res47[4];
+	u32	pci_pibar0;
+	u8	res48[4];
+	u32	pci_picmr0;
+	u8	res49[4];
+	u32	pci_cfg_addr;
+	u32	pci_cfg_data;
+	u32	pci_int_ack;
+	u8	res50[756];
+} pci_cpm2_t;
+
+/* Interrupt Controller.
+*/
+typedef struct interrupt_controller {
+	u16	ic_sicr;
+	u8	res1[2];
+	u32	ic_sivec;
+	u32	ic_sipnrh;
+	u32	ic_sipnrl;
+	u32	ic_siprr;
+	u32	ic_scprrh;
+	u32	ic_scprrl;
+	u32	ic_simrh;
+	u32	ic_simrl;
+	u32	ic_siexr;
+	u8	res2[88];
+} intctl_cpm2_t;
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+	u32	car_sccr;
+	u8	res1[4];
+	u32	car_scmr;
+	u8	res2[4];
+	u32	car_rsr;
+	u32	car_rmr;
+	u8	res[104];
+} car_cpm2_t;
+
+/* Input/Output Port control/status registers.
+ * Names consistent with processor manual, although they are different
+ * from the original 8xx names.......
+ */
+typedef struct io_port {
+	u32	iop_pdira;
+	u32	iop_ppara;
+	u32	iop_psora;
+	u32	iop_podra;
+	u32	iop_pdata;
+	u8	res1[12];
+	u32	iop_pdirb;
+	u32	iop_pparb;
+	u32	iop_psorb;
+	u32	iop_podrb;
+	u32	iop_pdatb;
+	u8	res2[12];
+	u32	iop_pdirc;
+	u32	iop_pparc;
+	u32	iop_psorc;
+	u32	iop_podrc;
+	u32	iop_pdatc;
+	u8	res3[12];
+	u32	iop_pdird;
+	u32	iop_ppard;
+	u32	iop_psord;
+	u32	iop_podrd;
+	u32	iop_pdatd;
+	u8	res4[12];
+} iop_cpm2_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+	u8	cpmt_tgcr1;
+	u8	res1[3];
+	u8	cpmt_tgcr2;
+	u8	res2[11];
+	u16	cpmt_tmr1;
+	u16	cpmt_tmr2;
+	u16	cpmt_trr1;
+	u16	cpmt_trr2;
+	u16	cpmt_tcr1;
+	u16	cpmt_tcr2;
+	u16	cpmt_tcn1;
+	u16	cpmt_tcn2;
+	u16	cpmt_tmr3;
+	u16	cpmt_tmr4;
+	u16	cpmt_trr3;
+	u16	cpmt_trr4;
+	u16	cpmt_tcr3;
+	u16	cpmt_tcr4;
+	u16	cpmt_tcn3;
+	u16	cpmt_tcn4;
+	u16	cpmt_ter1;
+	u16	cpmt_ter2;
+	u16	cpmt_ter3;
+	u16	cpmt_ter4;
+	u8	res3[584];
+} cpmtimer_cpm2_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+	u8	res0[24];
+	u8	sdma_sdsr;
+	u8	res1[3];
+	u8	sdma_sdmr;
+	u8	res2[3];
+	u8	sdma_idsr1;
+	u8	res3[3];
+	u8	sdma_idmr1;
+	u8	res4[3];
+	u8	sdma_idsr2;
+	u8	res5[3];
+	u8	sdma_idmr2;
+	u8	res6[3];
+	u8	sdma_idsr3;
+	u8	res7[3];
+	u8	sdma_idmr3;
+	u8	res8[3];
+	u8	sdma_idsr4;
+	u8	res9[3];
+	u8	sdma_idmr4;
+	u8	res10[707];
+} sdma_cpm2_t;
+
+/* Fast controllers
+*/
+typedef struct fcc {
+	u32	fcc_gfmr;
+	u32	fcc_fpsmr;
+	u16	fcc_ftodr;
+	u8	res1[2];
+	u16	fcc_fdsr;
+	u8	res2[2];
+	u16	fcc_fcce;
+	u8	res3[2];
+	u16	fcc_fccm;
+	u8	res4[2];
+	u8	fcc_fccs;
+	u8	res5[3];
+	u8	fcc_ftirr_phy[4];
+} fcc_t;
+
+/* Fast controllers continued
+ */
+typedef struct fcc_c {
+	u32	fcc_firper;
+	u32	fcc_firer;
+	u32	fcc_firsr_hi;
+	u32	fcc_firsr_lo;
+	u8	fcc_gfemr;
+	u8	res1[15];
+} fcc_c_t;
+
+/* TC Layer
+ */
+typedef struct tclayer {
+	u16	tc_tcmode;
+	u16	tc_cdsmr;
+	u16	tc_tcer;
+	u16	tc_rcc;
+	u16	tc_tcmr;
+	u16	tc_fcc;
+	u16	tc_ccc;
+	u16	tc_icc;
+	u16	tc_tcc;
+	u16	tc_ecc;
+	u8	res1[12];
+} tclayer_t;
+
+
+/* I2C
+*/
+typedef struct i2c {
+	u8	i2c_i2mod;
+	u8	res1[3];
+	u8	i2c_i2add;
+	u8	res2[3];
+	u8	i2c_i2brg;
+	u8	res3[3];
+	u8	i2c_i2com;
+	u8	res4[3];
+	u8	i2c_i2cer;
+	u8	res5[3];
+	u8	i2c_i2cmr;
+	u8	res6[331];
+} i2c_cpm2_t;
+
+typedef struct scc {		/* Serial communication channels */
+	u32	scc_gsmrl;
+	u32	scc_gsmrh;
+	u16	scc_psmr;
+	u8	res1[2];
+	u16	scc_todr;
+	u16	scc_dsr;
+	u16	scc_scce;
+	u8	res2[2];
+	u16	scc_sccm;
+	u8	res3;
+	u8	scc_sccs;
+	u8	res4[8];
+} scc_t;
+
+typedef struct smc {		/* Serial management channels */
+	u8	res1[2];
+	u16	smc_smcmr;
+	u8	res2[2];
+	u8	smc_smce;
+	u8	res3[3];
+	u8	smc_smcm;
+	u8	res4[5];
+} smc_t;
+
+/* Serial Peripheral Interface.
+*/
+typedef struct spi_ctrl {
+	u16	spi_spmode;
+	u8	res1[4];
+	u8	spi_spie;
+	u8	res2[3];
+	u8	spi_spim;
+	u8	res3[2];
+	u8	spi_spcom;
+	u8	res4[82];
+} spictl_cpm2_t;
+
+/* CPM Mux.
+*/
+typedef struct cpmux {
+	u8	cmx_si1cr;
+	u8	res1;
+	u8	cmx_si2cr;
+	u8	res2;
+	u32	cmx_fcr;
+	u32	cmx_scr;
+	u8	cmx_smr;
+	u8	res3;
+	u16	cmx_uar;
+	u8	res4[16];
+} cpmux_t;
+
+/* SIRAM control
+*/
+typedef struct siram {
+	u16	si_amr;
+	u16	si_bmr;
+	u16	si_cmr;
+	u16	si_dmr;
+	u8	si_gmr;
+	u8	res1;
+	u8	si_cmdr;
+	u8	res2;
+	u8	si_str;
+	u8	res3;
+	u16	si_rsr;
+} siramctl_t;
+
+typedef struct mcc {
+	u16	mcc_mcce;
+	u8	res1[2];
+	u16	mcc_mccm;
+	u8	res2[2];
+	u8	mcc_mccf;
+	u8	res3[7];
+} mcc_t;
+
+typedef struct comm_proc {
+	u32	cp_cpcr;
+	u32	cp_rccr;
+	u8	res1[14];
+	u16	cp_rter;
+	u8	res2[2];
+	u16	cp_rtmr;
+	u16	cp_rtscr;
+	u8	res3[2];
+	u32	cp_rtsr;
+	u8	res4[12];
+} cpm_cpm2_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	u16	usb_usep1;
+	u16	usb_usep2;
+	u16	usb_usep3;
+	u16	usb_usep4;
+	u8	res2[4];
+	u16	usb_usber;
+	u8	res3[2];
+	u16	usb_usbmr;
+	u8	usb_usbs;
+	u8	res4[7];
+} usb_cpm2_t;
+
+/* ...and the whole thing wrapped up....
+*/
+
+typedef struct immap {
+	/* Some references are into the unique and known dpram spaces,
+	 * others are from the generic base.
+	 */
+#define im_dprambase	im_dpram1
+	u8		im_dpram1[16*1024];
+	u8		res1[16*1024];
+	u8		im_dpram2[4*1024];
+	u8		res2[8*1024];
+	u8		im_dpram3[4*1024];
+	u8		res3[16*1024];
+
+	sysconf_cpm2_t	im_siu_conf;	/* SIU Configuration */
+	memctl_cpm2_t	im_memctl;	/* Memory Controller */
+	sit_cpm2_t	im_sit;		/* System Integration Timers */
+	pci_cpm2_t	im_pci;		/* PCI Controller */
+	intctl_cpm2_t	im_intctl;	/* Interrupt Controller */
+	car_cpm2_t	im_clkrst;	/* Clocks and reset */
+	iop_cpm2_t	im_ioport;	/* IO Port control/status */
+	cpmtimer_cpm2_t	im_cpmtimer;	/* CPM timers */
+	sdma_cpm2_t	im_sdma;	/* SDMA control/status */
+
+	fcc_t		im_fcc[3];	/* Three FCCs */
+	u8		res4z[32];
+	fcc_c_t		im_fcc_c[3];	/* Continued FCCs */
+
+	u8		res4[32];
+
+	tclayer_t	im_tclayer[8];	/* Eight TCLayers */
+	u16		tc_tcgsr;
+	u16		tc_tcger;
+
+	/* First set of baud rate generators.
+	*/
+	u8		res[236];
+	u32		im_brgc5;
+	u32		im_brgc6;
+	u32		im_brgc7;
+	u32		im_brgc8;
+
+	u8		res5[608];
+
+	i2c_cpm2_t	im_i2c;		/* I2C control/status */
+	cpm_cpm2_t	im_cpm;		/* Communication processor */
+
+	/* Second set of baud rate generators.
+	*/
+	u32		im_brgc1;
+	u32		im_brgc2;
+	u32		im_brgc3;
+	u32		im_brgc4;
+
+	scc_t		im_scc[4];	/* Four SCCs */
+	smc_t		im_smc[2];	/* Couple of SMCs */
+	spictl_cpm2_t	im_spi;		/* A SPI */
+	cpmux_t		im_cpmux;	/* CPM clock route mux */
+	siramctl_t	im_siramctl1;	/* First SI RAM Control */
+	mcc_t		im_mcc1;	/* First MCC */
+	siramctl_t	im_siramctl2;	/* Second SI RAM Control */
+	mcc_t		im_mcc2;	/* Second MCC */
+	usb_cpm2_t	im_usb;		/* USB Controller */
+
+	u8		res6[1153];
+
+	u16		im_si1txram[256];
+	u8		res7[512];
+	u16		im_si1rxram[256];
+	u8		res8[512];
+	u16		im_si2txram[256];
+	u8		res9[512];
+	u16		im_si2rxram[256];
+	u8		res10[512];
+	u8		res11[4096];
+} cpm2_map_t;
+
+extern cpm2_map_t __iomem *cpm2_immr;
+
+#endif /* __IMMAP_CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
new file mode 100644
index 00000000000..3c2fced3ac2
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -0,0 +1,483 @@
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+	__be32	iadd;		/* I-RAM Address Register */
+	__be32	idata;		/* I-RAM Data Register */
+	u8	res0[0x78];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+	__be32	qicr;
+	__be32	qivec;
+	__be32	qripnr;
+	__be32	qipnr;
+	__be32	qipxcc;
+	__be32	qipycc;
+	__be32	qipwcc;
+	__be32	qipzcc;
+	__be32	qimr;
+	__be32	qrimr;
+	__be32	qicnr;
+	u8	res0[0x4];
+	__be32	qiprta;
+	__be32	qiprtb;
+	u8	res1[0x4];
+	__be32	qricr;
+	u8	res2[0x20];
+	__be32	qhivec;
+	u8	res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+	__be32	cecr;		/* QE command register */
+	__be32	ceccr;		/* QE controller configuration register */
+	__be32	cecdr;		/* QE command data register */
+	u8	res0[0xA];
+	__be16	ceter;		/* QE timer event register */
+	u8	res1[0x2];
+	__be16	cetmr;		/* QE timers mask register */
+	__be32	cetscr;		/* QE time-stamp timer control register */
+	__be32	cetsr1;		/* QE time-stamp register 1 */
+	__be32	cetsr2;		/* QE time-stamp register 2 */
+	u8	res2[0x8];
+	__be32	cevter;		/* QE virtual tasks event register */
+	__be32	cevtmr;		/* QE virtual tasks mask register */
+	__be16	cercr;		/* QE RAM control register */
+	u8	res3[0x2];
+	u8	res4[0x24];
+	__be16	ceexe1;		/* QE external request 1 event register */
+	u8	res5[0x2];
+	__be16	ceexm1;		/* QE external request 1 mask register */
+	u8	res6[0x2];
+	__be16	ceexe2;		/* QE external request 2 event register */
+	u8	res7[0x2];
+	__be16	ceexm2;		/* QE external request 2 mask register */
+	u8	res8[0x2];
+	__be16	ceexe3;		/* QE external request 3 event register */
+	u8	res9[0x2];
+	__be16	ceexm3;		/* QE external request 3 mask register */
+	u8	res10[0x2];
+	__be16	ceexe4;		/* QE external request 4 event register */
+	u8	res11[0x2];
+	__be16	ceexm4;		/* QE external request 4 mask register */
+	u8	res12[0x3A];
+	__be32	ceurnr;		/* QE microcode revision number register */
+	u8	res13[0x244];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+	__be32	cmxgcr;		/* CMX general clock route register */
+	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
+	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
+	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
+	__be32	cmxucr[4];	/* CMX UCCx clock route registers */
+	__be32	cmxupcr;	/* CMX UPC clock route register */
+	u8	res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+	u8	gtcfr1;		/* Timer 1 and Timer 2 global config register*/
+	u8	res0[0x3];
+	u8	gtcfr2;		/* Timer 3 and timer 4 global config register*/
+	u8	res1[0xB];
+	__be16	gtmdr1;		/* Timer 1 mode register */
+	__be16	gtmdr2;		/* Timer 2 mode register */
+	__be16	gtrfr1;		/* Timer 1 reference register */
+	__be16	gtrfr2;		/* Timer 2 reference register */
+	__be16	gtcpr1;		/* Timer 1 capture register */
+	__be16	gtcpr2;		/* Timer 2 capture register */
+	__be16	gtcnr1;		/* Timer 1 counter */
+	__be16	gtcnr2;		/* Timer 2 counter */
+	__be16	gtmdr3;		/* Timer 3 mode register */
+	__be16	gtmdr4;		/* Timer 4 mode register */
+	__be16	gtrfr3;		/* Timer 3 reference register */
+	__be16	gtrfr4;		/* Timer 4 reference register */
+	__be16	gtcpr3;		/* Timer 3 capture register */
+	__be16	gtcpr4;		/* Timer 4 capture register */
+	__be16	gtcnr3;		/* Timer 3 counter */
+	__be16	gtcnr4;		/* Timer 4 counter */
+	__be16	gtevr1;		/* Timer 1 event register */
+	__be16	gtevr2;		/* Timer 2 event register */
+	__be16	gtevr3;		/* Timer 3 event register */
+	__be16	gtevr4;		/* Timer 4 event register */
+	__be16	gtps;		/* Timer 1 prescale register */
+	u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+	__be32	brgc[16];	/* BRG configuration registers */
+	u8	res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+	u8	res0[0x20];
+	__be32	spmode;		/* SPI mode register */
+	u8	res1[0x2];
+	u8	spie;		/* SPI event register */
+	u8	res2[0x1];
+	u8	res3[0x2];
+	u8	spim;		/* SPI mask register */
+	u8	res4[0x1];
+	u8	res5[0x1];
+	u8	spcom;		/* SPI command register */
+	u8	res6[0x2];
+	__be32	spitd;		/* SPI transmit data register (cpu mode) */
+	__be32	spird;		/* SPI receive data register (cpu mode) */
+	u8	res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+	__be16	siamr1;		/* SI1 TDMA mode register */
+	__be16	sibmr1;		/* SI1 TDMB mode register */
+	__be16	sicmr1;		/* SI1 TDMC mode register */
+	__be16	sidmr1;		/* SI1 TDMD mode register */
+	u8	siglmr1_h;	/* SI1 global mode register high */
+	u8	res0[0x1];
+	u8	sicmdr1_h;	/* SI1 command register high */
+	u8	res2[0x1];
+	u8	sistr1_h;	/* SI1 status register high */
+	u8	res3[0x1];
+	__be16	sirsr1_h;	/* SI1 RAM shadow address register high */
+	u8	sitarc1;	/* SI1 RAM counter Tx TDMA */
+	u8	sitbrc1;	/* SI1 RAM counter Tx TDMB */
+	u8	sitcrc1;	/* SI1 RAM counter Tx TDMC */
+	u8	sitdrc1;	/* SI1 RAM counter Tx TDMD */
+	u8	sirarc1;	/* SI1 RAM counter Rx TDMA */
+	u8	sirbrc1;	/* SI1 RAM counter Rx TDMB */
+	u8	sircrc1;	/* SI1 RAM counter Rx TDMC */
+	u8	sirdrc1;	/* SI1 RAM counter Rx TDMD */
+	u8	res4[0x8];
+	__be16	siemr1;		/* SI1 TDME mode register 16 bits */
+	__be16	sifmr1;		/* SI1 TDMF mode register 16 bits */
+	__be16	sigmr1;		/* SI1 TDMG mode register 16 bits */
+	__be16	sihmr1;		/* SI1 TDMH mode register 16 bits */
+	u8	siglmg1_l;	/* SI1 global mode register low 8 bits */
+	u8	res5[0x1];
+	u8	sicmdr1_l;	/* SI1 command register low 8 bits */
+	u8	res6[0x1];
+	u8	sistr1_l;	/* SI1 status register low 8 bits */
+	u8	res7[0x1];
+	__be16	sirsr1_l;	/* SI1 RAM shadow address register low 16 bits*/
+	u8	siterc1;	/* SI1 RAM counter Tx TDME 8 bits */
+	u8	sitfrc1;	/* SI1 RAM counter Tx TDMF 8 bits */
+	u8	sitgrc1;	/* SI1 RAM counter Tx TDMG 8 bits */
+	u8	sithrc1;	/* SI1 RAM counter Tx TDMH 8 bits */
+	u8	sirerc1;	/* SI1 RAM counter Rx TDME 8 bits */
+	u8	sirfrc1;	/* SI1 RAM counter Rx TDMF 8 bits */
+	u8	sirgrc1;	/* SI1 RAM counter Rx TDMG 8 bits */
+	u8	sirhrc1;	/* SI1 RAM counter Rx TDMH 8 bits */
+	u8	res8[0x8];
+	__be32	siml1;		/* SI1 multiframe limit register */
+	u8	siedm1;		/* SI1 extended diagnostic mode register */
+	u8	res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+	u8 	tx[0x400];
+	u8	rx[0x400];
+	u8	res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	__be16	usb_usep1;
+	__be16	usb_usep2;
+	__be16	usb_usep3;
+	__be16	usb_usep4;
+	u8	res2[4];
+	__be16	usb_usber;
+	u8	res3[2];
+	__be16	usb_usbmr;
+	u8	res4[1];
+	u8	usb_usbs;
+	__be16	usb_ussft;
+	u8	res5[2];
+	__be16	usb_usfrn;
+	u8	res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct mcc {
+	__be32	mcce;		/* MCC event register */
+	__be32	mccm;		/* MCC mask register */
+	__be32	mccf;		/* MCC configuration register */
+	__be32	merl;		/* MCC emergency request level register */
+	u8	res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+	__be32	gumr_l;		/* UCCx general mode register (low) */
+	__be32	gumr_h;		/* UCCx general mode register (high) */
+	__be16	upsmr;		/* UCCx protocol-specific mode register */
+	u8	res0[0x2];
+	__be16	utodr;		/* UCCx transmit on demand register */
+	__be16	udsr;		/* UCCx data synchronization register */
+	__be16	ucce;		/* UCCx event register */
+	u8	res1[0x2];
+	__be16	uccm;		/* UCCx mask register */
+	u8	res2[0x1];
+	u8	uccs;		/* UCCx status register */
+	u8	res3[0x24];
+	__be16	utpt;
+	u8	res4[0x52];
+	u8	guemr;		/* UCC general extended mode register */
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+	__be32	gumr;		/* UCCx general mode register */
+	__be32	upsmr;		/* UCCx protocol-specific mode register */
+	__be16	utodr;		/* UCCx transmit on demand register */
+	u8	res0[0x2];
+	__be16	udsr;		/* UCCx data synchronization register */
+	u8	res1[0x2];
+	__be32	ucce;		/* UCCx event register */
+	__be32	uccm;		/* UCCx mask register */
+	u8	uccs;		/* UCCx status register */
+	u8	res2[0x7];
+	__be32	urfb;		/* UCC receive FIFO base */
+	__be16	urfs;		/* UCC receive FIFO size */
+	u8	res3[0x2];
+	__be16	urfet;		/* UCC receive FIFO emergency threshold */
+	__be16	urfset;		/* UCC receive FIFO special emergency
+				   threshold */
+	__be32	utfb;		/* UCC transmit FIFO base */
+	__be16	utfs;		/* UCC transmit FIFO size */
+	u8	res4[0x2];
+	__be16	utfet;		/* UCC transmit FIFO emergency threshold */
+	u8	res5[0x2];
+	__be16	utftt;		/* UCC transmit FIFO transmit threshold */
+	u8	res6[0x2];
+	__be16	utpt;		/* UCC transmit polling timer */
+	u8	res7[0x2];
+	__be32	urtry;		/* UCC retry counter register */
+	u8	res8[0x4C];
+	u8	guemr;		/* UCC general extended mode register */
+} __attribute__ ((packed));
+
+struct ucc {
+	union {
+		struct	ucc_slow slow;
+		struct	ucc_fast fast;
+		u8	res[0x200];	/* UCC blocks are 512 bytes each */
+	};
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+	__be32	upgcr;		/* UTOPIA/POS general configuration register */
+	__be32	uplpa;		/* UTOPIA/POS last PHY address */
+	__be32	uphec;		/* ATM HEC register */
+	__be32	upuc;		/* UTOPIA/POS UCC configuration */
+	__be32	updc1;		/* UTOPIA/POS device 1 configuration */
+	__be32	updc2;		/* UTOPIA/POS device 2 configuration */
+	__be32	updc3;		/* UTOPIA/POS device 3 configuration */
+	__be32	updc4;		/* UTOPIA/POS device 4 configuration */
+	__be32	upstpa;		/* UTOPIA/POS STPA threshold */
+	u8	res0[0xC];
+	__be32	updrs1_h;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs1_l;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs2_h;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs2_l;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs3_h;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs3_l;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs4_h;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrs4_l;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrp1;		/* UTOPIA/POS device 1 receive priority low */
+	__be32	updrp2;		/* UTOPIA/POS device 2 receive priority low */
+	__be32	updrp3;		/* UTOPIA/POS device 3 receive priority low */
+	__be32	updrp4;		/* UTOPIA/POS device 4 receive priority low */
+	__be32	upde1;		/* UTOPIA/POS device 1 event */
+	__be32	upde2;		/* UTOPIA/POS device 2 event */
+	__be32	upde3;		/* UTOPIA/POS device 3 event */
+	__be32	upde4;		/* UTOPIA/POS device 4 event */
+	__be16	uprp1;
+	__be16	uprp2;
+	__be16	uprp3;
+	__be16	uprp4;
+	u8	res1[0x8];
+	__be16	uptirr1_0;	/* Device 1 transmit internal rate 0 */
+	__be16	uptirr1_1;	/* Device 1 transmit internal rate 1 */
+	__be16	uptirr1_2;	/* Device 1 transmit internal rate 2 */
+	__be16	uptirr1_3;	/* Device 1 transmit internal rate 3 */
+	__be16	uptirr2_0;	/* Device 2 transmit internal rate 0 */
+	__be16	uptirr2_1;	/* Device 2 transmit internal rate 1 */
+	__be16	uptirr2_2;	/* Device 2 transmit internal rate 2 */
+	__be16	uptirr2_3;	/* Device 2 transmit internal rate 3 */
+	__be16	uptirr3_0;	/* Device 3 transmit internal rate 0 */
+	__be16	uptirr3_1;	/* Device 3 transmit internal rate 1 */
+	__be16	uptirr3_2;	/* Device 3 transmit internal rate 2 */
+	__be16	uptirr3_3;	/* Device 3 transmit internal rate 3 */
+	__be16	uptirr4_0;	/* Device 4 transmit internal rate 0 */
+	__be16	uptirr4_1;	/* Device 4 transmit internal rate 1 */
+	__be16	uptirr4_2;	/* Device 4 transmit internal rate 2 */
+	__be16	uptirr4_3;	/* Device 4 transmit internal rate 3 */
+	__be32	uper1;		/* Device 1 port enable register */
+	__be32	uper2;		/* Device 2 port enable register */
+	__be32	uper3;		/* Device 3 port enable register */
+	__be32	uper4;		/* Device 4 port enable register */
+	u8	res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+	__be32	sdsr;		/* Serial DMA status register */
+	__be32	sdmr;		/* Serial DMA mode register */
+	__be32	sdtr1;		/* SDMA system bus threshold register */
+	__be32	sdtr2;		/* SDMA secondary bus threshold register */
+	__be32	sdhy1;		/* SDMA system bus hysteresis register */
+	__be32	sdhy2;		/* SDMA secondary bus hysteresis register */
+	__be32	sdta1;		/* SDMA system bus address register */
+	__be32	sdta2;		/* SDMA secondary bus address register */
+	__be32	sdtm1;		/* SDMA system bus MSNUM register */
+	__be32	sdtm2;		/* SDMA secondary bus MSNUM register */
+	u8	res0[0x10];
+	__be32	sdaqr;		/* SDMA address bus qualify register */
+	__be32	sdaqmr;		/* SDMA address bus qualify mask register */
+	u8	res1[0x4];
+	__be32	sdebcr;		/* SDMA CAM entries base register */
+	u8	res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+	__be32	bpdcr;		/* Breakpoint debug command register */
+	__be32	bpdsr;		/* Breakpoint debug status register */
+	__be32	bpdmr;		/* Breakpoint debug mask register */
+	__be32	bprmrr0;	/* Breakpoint request mode risc register 0 */
+	__be32	bprmrr1;	/* Breakpoint request mode risc register 1 */
+	u8	res0[0x8];
+	__be32	bprmtr0;	/* Breakpoint request mode trb register 0 */
+	__be32	bprmtr1;	/* Breakpoint request mode trb register 1 */
+	u8	res1[0x8];
+	__be32	bprmir;		/* Breakpoint request mode immediate register */
+	__be32	bprmsr;		/* Breakpoint request mode serial register */
+	__be32	bpemr;		/* Breakpoint exit mode register */
+	u8	res2[0x48];
+} __attribute__ ((packed));
+
+/*
+ * RISC Special Registers (Trap and Breakpoint).  These are described in
+ * the QE Developer's Handbook.
+ */
+struct rsp {
+	__be32 tibcr[16];	/* Trap/instruction breakpoint control regs */
+	u8 res0[64];
+	__be32 ibcr0;
+	__be32 ibs0;
+	__be32 ibcnr0;
+	u8 res1[4];
+	__be32 ibcr1;
+	__be32 ibs1;
+	__be32 ibcnr1;
+	__be32 npcr;
+	__be32 dbcr;
+	__be32 dbar;
+	__be32 dbamr;
+	__be32 dbsr;
+	__be32 dbcnr;
+	u8 res2[12];
+	__be32 dbdr_h;
+	__be32 dbdr_l;
+	__be32 dbdmr_h;
+	__be32 dbdmr_l;
+	__be32 bsr;
+	__be32 bor;
+	__be32 bior;
+	u8 res3[4];
+	__be32 iatr[4];
+	__be32 eccr;		/* Exception control configuration register */
+	__be32 eicr;
+	u8 res4[0x100-0xf8];
+} __attribute__ ((packed));
+
+struct qe_immap {
+	struct qe_iram		iram;		/* I-RAM */
+	struct qe_ic_regs	ic;		/* Interrupt Controller */
+	struct cp_qe		cp;		/* Communications Processor */
+	struct qe_mux		qmx;		/* QE Multiplexer */
+	struct qe_timers	qet;		/* QE Timers */
+	struct spi		spi[0x2];	/* spi */
+	struct mcc		mcc;		/* mcc */
+	struct qe_brg		brg;		/* brg */
+	struct usb_ctlr		usb;		/* USB */
+	struct si1		si1;		/* SI */
+	u8			res11[0x800];
+	struct sir		sir;		/* SI Routing Tables */
+	struct ucc		ucc1;		/* ucc1 */
+	struct ucc		ucc3;		/* ucc3 */
+	struct ucc		ucc5;		/* ucc5 */
+	struct ucc		ucc7;		/* ucc7 */
+	u8			res12[0x600];
+	struct upc		upc1;		/* MultiPHY UTOPIA POS Ctrlr 1*/
+	struct ucc		ucc2;		/* ucc2 */
+	struct ucc		ucc4;		/* ucc4 */
+	struct ucc		ucc6;		/* ucc6 */
+	struct ucc		ucc8;		/* ucc8 */
+	u8			res13[0x600];
+	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
+	struct sdma		sdma;		/* SDMA */
+	struct dbg		dbg;		/* 0x104080 - 0x1040FF
+						   Debug Space */
+	struct rsp		rsp[0x2];	/* 0x104100 - 0x1042FF
+						   RISC Special Registers
+						   (Trap and Breakpoint) */
+	u8			res14[0x300];	/* 0x104300 - 0x1045FF */
+	u8			res15[0x3A00];	/* 0x104600 - 0x107FFF */
+	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
+	u8			muram[0xC000];	/* 0x110000 - 0x11C000
+						   Multi-user RAM */
+	u8			res17[0x24000];	/* 0x11C000 - 0x140000 */
+	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap __iomem *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(void *address)
+{
+	if ( ((u32)address >= (u32)qe_immr) &&
+			((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
+		return (unsigned long)(address - (u32)qe_immr +
+				(u32)get_qe_base());
+	return (unsigned long)virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/arch/powerpc/include/asm/io-defs.h b/arch/powerpc/include/asm/io-defs.h
new file mode 100644
index 00000000000..44d7927aec6
--- /dev/null
+++ b/arch/powerpc/include/asm/io-defs.h
@@ -0,0 +1,60 @@
+/* This file is meant to be include multiple times by other headers */
+/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */
+
+DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+
+#ifdef __powerpc64__
+DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+#endif /* __powerpc64__ */
+
+DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port)
+DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port)
+DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port)
+
+DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+
+DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+
+DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n),
+		 (a, c, n), mem, a)
+DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n),
+		 (d, s, n), mem, s)
+DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n),
+		 (d, s, n), mem, d)
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
new file mode 100644
index 00000000000..77c7fa025e6
--- /dev/null
+++ b/arch/powerpc/include/asm/io.h
@@ -0,0 +1,787 @@
+#ifndef _ASM_POWERPC_IO_H
+#define _ASM_POWERPC_IO_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Check of existence of legacy devices */
+extern int check_legacy_ioport(unsigned long base_port);
+#define I8042_DATA_REG	0x60
+#define FDC_BASE	0x3f0
+/* only relevant for PReP */
+#define _PIDXR		0x279
+#define _PNPWRP		0xa79
+#define PNPBIOS_BASE	0xf000
+
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/byteorder.h>
+#include <asm/synch.h>
+#include <asm/delay.h>
+#include <asm/mmu.h>
+
+#include <asm-generic/iomap.h>
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+
+#define SIO_CONFIG_RA	0x398
+#define SIO_CONFIG_RD	0x399
+
+#define SLOW_DOWN_IO
+
+/* 32 bits uses slightly different variables for the various IO
+ * bases. Most of this file only uses _IO_BASE though which we
+ * define properly based on the platform
+ */
+#ifndef CONFIG_PCI
+#define _IO_BASE	0
+#define _ISA_MEM_BASE	0
+#define PCI_DRAM_OFFSET 0
+#elif defined(CONFIG_PPC32)
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	pci_dram_offset
+#else
+#define _IO_BASE	pci_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	0
+#endif
+
+extern unsigned long isa_io_base;
+extern unsigned long pci_io_base;
+extern unsigned long pci_dram_offset;
+
+extern resource_size_t isa_mem_base;
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
+#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
+#endif
+
+/*
+ *
+ * Low level MMIO accessors
+ *
+ * This provides the non-bus specific accessors to MMIO. Those are PowerPC
+ * specific and thus shouldn't be used in generic code. The accessors
+ * provided here are:
+ *
+ *	in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
+ *	out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
+ *	_insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
+ *
+ * Those operate directly on a kernel virtual address. Note that the prototype
+ * for the out_* accessors has the arguments in opposite order from the usual
+ * linux PCI accessors. Unlike those, they take the address first and the value
+ * next.
+ *
+ * Note: I might drop the _ns suffix on the stream operations soon as it is
+ * simply normal for stream operations to not swap in the first place.
+ *
+ */
+
+#ifdef CONFIG_PPC64
+#define IO_SET_SYNC_FLAG()	do { local_paca->io_sync = 1; } while(0)
+#else
+#define IO_SET_SYNC_FLAG()
+#endif
+
+/* gcc 4.0 and older doesn't have 'Z' constraint */
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
+#define DEF_MMIO_IN_LE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync"	\
+		: "=r" (ret) : "r" (addr), "m" (*addr) : "memory");	\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) 				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn" %1,0,%2"			\
+		: "=m" (*addr) : "r" (val), "r" (addr) : "memory");	\
+	IO_SET_SYNC_FLAG();						\
+}
+#else /* newer gcc */
+#define DEF_MMIO_IN_LE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync"	\
+		: "=r" (ret) : "Z" (*addr) : "memory");			\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) 				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn" %1,%y0"			\
+		: "=Z" (*addr) : "r" (val) : "memory");			\
+	IO_SET_SYNC_FLAG();						\
+}
+#endif
+
+#define DEF_MMIO_IN_BE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
+		: "=r" (ret) : "m" (*addr) : "memory");			\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_BE(name, size, insn)				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0"			\
+		: "=m" (*addr) : "r" (val) : "memory");			\
+	IO_SET_SYNC_FLAG();						\
+}
+
+
+DEF_MMIO_IN_BE(in_8,     8, lbz);
+DEF_MMIO_IN_BE(in_be16, 16, lhz);
+DEF_MMIO_IN_BE(in_be32, 32, lwz);
+DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
+DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
+
+DEF_MMIO_OUT_BE(out_8,     8, stb);
+DEF_MMIO_OUT_BE(out_be16, 16, sth);
+DEF_MMIO_OUT_BE(out_be32, 32, stw);
+DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
+DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
+
+#ifdef __powerpc64__
+DEF_MMIO_OUT_BE(out_be64, 64, std);
+DEF_MMIO_IN_BE(in_be64, 64, ld);
+
+/* There is no asm instructions for 64 bits reverse loads and stores */
+static inline u64 in_le64(const volatile u64 __iomem *addr)
+{
+	return swab64(in_be64(addr));
+}
+
+static inline void out_le64(volatile u64 __iomem *addr, u64 val)
+{
+	out_be64(addr, swab64(val));
+}
+#endif /* __powerpc64__ */
+
+/*
+ * Low level IO stream instructions are defined out of line for now
+ */
+extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
+extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
+extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
+extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
+extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
+extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
+
+/* The _ns naming is historical and will be removed. For now, just #define
+ * the non _ns equivalent names
+ */
+#define _insw	_insw_ns
+#define _insl	_insl_ns
+#define _outsw	_outsw_ns
+#define _outsl	_outsl_ns
+
+
+/*
+ * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
+ */
+
+extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
+extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
+			   unsigned long n);
+extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
+			 unsigned long n);
+
+/*
+ *
+ * PCI and standard ISA accessors
+ *
+ * Those are globally defined linux accessors for devices on PCI or ISA
+ * busses. They follow the Linux defined semantics. The current implementation
+ * for PowerPC is as close as possible to the x86 version of these, and thus
+ * provides fairly heavy weight barriers for the non-raw versions
+ *
+ * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
+ * allowing the platform to provide its own implementation of some or all
+ * of the accessors.
+ */
+
+/*
+ * Include the EEH definitions when EEH is enabled only so they don't get
+ * in the way when building for 32 bits
+ */
+#ifdef CONFIG_EEH
+#include <asm/eeh.h>
+#endif
+
+/* Shortcut to the MMIO argument pointer */
+#define PCI_IO_ADDR	volatile void __iomem *
+
+/* Indirect IO address tokens:
+ *
+ * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
+ * on all IOs. (Note that this is all 64 bits only for now)
+ *
+ * To help platforms who may need to differenciate MMIO addresses in
+ * their hooks, a bitfield is reserved for use by the platform near the
+ * top of MMIO addresses (not PIO, those have to cope the hard way).
+ *
+ * This bit field is 12 bits and is at the top of the IO virtual
+ * addresses PCI_IO_INDIRECT_TOKEN_MASK.
+ *
+ * The kernel virtual space is thus:
+ *
+ *  0xD000000000000000		: vmalloc
+ *  0xD000080000000000		: PCI PHB IO space
+ *  0xD000080080000000		: ioremap
+ *  0xD0000fffffffffff		: end of ioremap region
+ *
+ * Since the top 4 bits are reserved as the region ID, we use thus
+ * the next 12 bits and keep 4 bits available for the future if the
+ * virtual address space is ever to be extended.
+ *
+ * The direct IO mapping operations will then mask off those bits
+ * before doing the actual access, though that only happen when
+ * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
+ * mechanism
+ */
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+#define PCI_IO_IND_TOKEN_MASK	0x0fff000000000000ul
+#define PCI_IO_IND_TOKEN_SHIFT	48
+#define PCI_FIX_ADDR(addr)						\
+	((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
+#define PCI_GET_ADDR_TOKEN(addr)					\
+	(((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> 		\
+		PCI_IO_IND_TOKEN_SHIFT)
+#define PCI_SET_ADDR_TOKEN(addr, token) 				\
+do {									\
+	unsigned long __a = (unsigned long)(addr);			\
+	__a &= ~PCI_IO_IND_TOKEN_MASK;					\
+	__a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT;	\
+	(addr) = (void __iomem *)__a;					\
+} while(0)
+#else
+#define PCI_FIX_ADDR(addr) (addr)
+#endif
+
+
+/*
+ * Non ordered and non-swapping "raw" accessors
+ */
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
+}
+
+#ifdef __powerpc64__
+static inline unsigned long __raw_readq(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
+}
+#endif /* __powerpc64__ */
+
+/*
+ *
+ * PCI PIO and MMIO accessors.
+ *
+ *
+ * On 32 bits, PIO operations have a recovery mechanism in case they trigger
+ * machine checks (which they occasionally do when probing non existing
+ * IO ports on some platforms, like PowerMac and 8xx).
+ * I always found it to be of dubious reliability and I am tempted to get
+ * rid of it one of these days. So if you think it's important to keep it,
+ * please voice up asap. We never had it for 64 bits and I do not intend
+ * to port it over
+ */
+
+#ifdef CONFIG_PPC32
+
+#define __do_in_asm(name, op)				\
+static inline unsigned int name(unsigned int port)	\
+{							\
+	unsigned int x;					\
+	__asm__ __volatile__(				\
+		"sync\n"				\
+		"0:"	op "	%0,0,%1\n"		\
+		"1:	twi	0,%0,0\n"		\
+		"2:	isync\n"			\
+		"3:	nop\n"				\
+		"4:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"5:	li	%0,-1\n"		\
+		"	b	4b\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align	2\n"			\
+		"	.long	0b,5b\n"		\
+		"	.long	1b,5b\n"		\
+		"	.long	2b,5b\n"		\
+		"	.long	3b,5b\n"		\
+		".previous"				\
+		: "=&r" (x)				\
+		: "r" (port + _IO_BASE)			\
+		: "memory");  				\
+	return x;					\
+}
+
+#define __do_out_asm(name, op)				\
+static inline void name(unsigned int val, unsigned int port) \
+{							\
+	__asm__ __volatile__(				\
+		"sync\n"				\
+		"0:" op " %0,0,%1\n"			\
+		"1:	sync\n"				\
+		"2:\n"					\
+		".section __ex_table,\"a\"\n"		\
+		"	.align	2\n"			\
+		"	.long	0b,2b\n"		\
+		"	.long	1b,2b\n"		\
+		".previous"				\
+		: : "r" (val), "r" (port + _IO_BASE)	\
+		: "memory");   	   	   		\
+}
+
+__do_in_asm(_rec_inb, "lbzx")
+__do_in_asm(_rec_inw, "lhbrx")
+__do_in_asm(_rec_inl, "lwbrx")
+__do_out_asm(_rec_outb, "stbx")
+__do_out_asm(_rec_outw, "sthbrx")
+__do_out_asm(_rec_outl, "stwbrx")
+
+#endif /* CONFIG_PPC32 */
+
+/* The "__do_*" operations below provide the actual "base" implementation
+ * for each of the defined acccessor. Some of them use the out_* functions
+ * directly, some of them still use EEH, though we might change that in the
+ * future. Those macros below provide the necessary argument swapping and
+ * handling of the IO base for PIO.
+ *
+ * They are themselves used by the macros that define the actual accessors
+ * and can be used by the hooks if any.
+ *
+ * Note that PIO operations are always defined in terms of their corresonding
+ * MMIO operations. That allows platforms like iSeries who want to modify the
+ * behaviour of both to only hook on the MMIO version and get both. It's also
+ * possible to hook directly at the toplevel PIO operation if they have to
+ * be handled differently
+ */
+#define __do_writeb(val, addr)	out_8(PCI_FIX_ADDR(addr), val)
+#define __do_writew(val, addr)	out_le16(PCI_FIX_ADDR(addr), val)
+#define __do_writel(val, addr)	out_le32(PCI_FIX_ADDR(addr), val)
+#define __do_writeq(val, addr)	out_le64(PCI_FIX_ADDR(addr), val)
+#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
+#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
+#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
+
+#ifdef CONFIG_EEH
+#define __do_readb(addr)	eeh_readb(PCI_FIX_ADDR(addr))
+#define __do_readw(addr)	eeh_readw(PCI_FIX_ADDR(addr))
+#define __do_readl(addr)	eeh_readl(PCI_FIX_ADDR(addr))
+#define __do_readq(addr)	eeh_readq(PCI_FIX_ADDR(addr))
+#define __do_readw_be(addr)	eeh_readw_be(PCI_FIX_ADDR(addr))
+#define __do_readl_be(addr)	eeh_readl_be(PCI_FIX_ADDR(addr))
+#define __do_readq_be(addr)	eeh_readq_be(PCI_FIX_ADDR(addr))
+#else /* CONFIG_EEH */
+#define __do_readb(addr)	in_8(PCI_FIX_ADDR(addr))
+#define __do_readw(addr)	in_le16(PCI_FIX_ADDR(addr))
+#define __do_readl(addr)	in_le32(PCI_FIX_ADDR(addr))
+#define __do_readq(addr)	in_le64(PCI_FIX_ADDR(addr))
+#define __do_readw_be(addr)	in_be16(PCI_FIX_ADDR(addr))
+#define __do_readl_be(addr)	in_be32(PCI_FIX_ADDR(addr))
+#define __do_readq_be(addr)	in_be64(PCI_FIX_ADDR(addr))
+#endif /* !defined(CONFIG_EEH) */
+
+#ifdef CONFIG_PPC32
+#define __do_outb(val, port)	_rec_outb(val, port)
+#define __do_outw(val, port)	_rec_outw(val, port)
+#define __do_outl(val, port)	_rec_outl(val, port)
+#define __do_inb(port)		_rec_inb(port)
+#define __do_inw(port)		_rec_inw(port)
+#define __do_inl(port)		_rec_inl(port)
+#else /* CONFIG_PPC32 */
+#define __do_outb(val, port)	writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_outw(val, port)	writew(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_outl(val, port)	writel(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_inb(port)		readb((PCI_IO_ADDR)_IO_BASE + port);
+#define __do_inw(port)		readw((PCI_IO_ADDR)_IO_BASE + port);
+#define __do_inl(port)		readl((PCI_IO_ADDR)_IO_BASE + port);
+#endif /* !CONFIG_PPC32 */
+
+#ifdef CONFIG_EEH
+#define __do_readsb(a, b, n)	eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsw(a, b, n)	eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsl(a, b, n)	eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
+#else /* CONFIG_EEH */
+#define __do_readsb(a, b, n)	_insb(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsw(a, b, n)	_insw(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsl(a, b, n)	_insl(PCI_FIX_ADDR(a), (b), (n))
+#endif /* !CONFIG_EEH */
+#define __do_writesb(a, b, n)	_outsb(PCI_FIX_ADDR(a),(b),(n))
+#define __do_writesw(a, b, n)	_outsw(PCI_FIX_ADDR(a),(b),(n))
+#define __do_writesl(a, b, n)	_outsl(PCI_FIX_ADDR(a),(b),(n))
+
+#define __do_insb(p, b, n)	readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_insw(p, b, n)	readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_insl(p, b, n)	readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_outsb(p, b, n)	writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+#define __do_outsw(p, b, n)	writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+#define __do_outsl(p, b, n)	writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+
+#define __do_memset_io(addr, c, n)	\
+				_memset_io(PCI_FIX_ADDR(addr), c, n)
+#define __do_memcpy_toio(dst, src, n)	\
+				_memcpy_toio(PCI_FIX_ADDR(dst), src, n)
+
+#ifdef CONFIG_EEH
+#define __do_memcpy_fromio(dst, src, n)	\
+				eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
+#else /* CONFIG_EEH */
+#define __do_memcpy_fromio(dst, src, n)	\
+				_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
+#endif /* !CONFIG_EEH */
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+#define DEF_PCI_HOOK(x)		x
+#else
+#define DEF_PCI_HOOK(x)		NULL
+#endif
+
+/* Structure containing all the hooks */
+extern struct ppc_pci_io {
+
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)	ret (*name) at;
+#define DEF_PCI_AC_NORET(name, at, al, space, aa)	void (*name) at;
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+} ppc_pci_io;
+
+/* The inline wrappers */
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
+static inline ret name at					\
+{								\
+	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+		return ppc_pci_io.name al;			\
+	return __do_##name al;					\
+}
+
+#define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
+static inline void name at					\
+{								\
+	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+		ppc_pci_io.name al;				\
+	else							\
+		__do_##name al;					\
+}
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+/* Some drivers check for the presence of readq & writeq with
+ * a #ifdef, so we make them happy here.
+ */
+#ifdef __powerpc64__
+#define readq	readq
+#define writeq	writeq
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/*
+ * We don't do relaxed operations yet, at least not with this semantic
+ */
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+
+#ifdef CONFIG_PPC32
+#define mmiowb()
+#else
+/*
+ * Enforce synchronisation of stores vs. spin_unlock
+ * (this does it explicitly, though our implementation of spin_unlock
+ * does it implicitely too)
+ */
+static inline void mmiowb(void)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__("sync; li %0,0; stb %0,%1(13)"
+	: "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync))
+	: "memory");
+}
+#endif /* !CONFIG_PPC32 */
+
+static inline void iosync(void)
+{
+        __asm__ __volatile__ ("sync" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O.
+ * No distinction between read/write on PPC; use eieio for all three.
+ * Those are fairly week though. They don't provide a barrier between
+ * MMIO and cacheable storage nor do they provide a barrier vs. locks,
+ * they only provide barriers between 2 __raw MMIO operations and
+ * possibly break write combining.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r()  eieio()
+#define iobarrier_w()  eieio()
+
+
+/*
+ * output pause versions need a delay at least for the
+ * w83c105 ide controller in a p610.
+ */
+#define inb_p(port)             inb(port)
+#define outb_p(val, port)       (udelay(1), outb((val), (port)))
+#define inw_p(port)             inw(port)
+#define outw_p(val, port)       (udelay(1), outw((val), (port)))
+#define inl_p(port)             inl(port)
+#define outl_p(val, port)       (udelay(1), outl((val), (port)))
+
+
+#define IO_SPACE_LIMIT ~(0UL)
+
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @address:   bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * We provide a few variations of it:
+ *
+ * * ioremap is the standard one and provides non-cacheable guarded mappings
+ *   and can be hooked by the platform via ppc_md
+ *
+ * * ioremap_flags allows to specify the page flags as an argument and can
+ *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
+ *   same thing as ioremap_flags.
+ *
+ * * ioremap_nocache is identical to ioremap
+ *
+ * * iounmap undoes such a mapping and can be hooked
+ *
+ * * __ioremap_at (and the pending __iounmap_at) are low level functions to
+ *   create hand-made mappings for use only by the PCI code and cannot
+ *   currently be hooked. Must be page aligned.
+ *
+ * * __ioremap is the low level implementation used by ioremap and
+ *   ioremap_flags and cannot be hooked (but can be used by a hook on one
+ *   of the previous ones)
+ *
+ * * __iounmap, is the low level implementation used by iounmap and cannot
+ *   be hooked (but can be used by a hook on iounmap)
+ *
+ */
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
+				   unsigned long flags);
+#define ioremap_nocache(addr, size)	ioremap((addr), (size))
+#define ioremap_prot(addr, size, prot)	ioremap_flags((addr), (size), (prot))
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
+			       unsigned long flags);
+extern void __iounmap(volatile void __iomem *addr);
+
+extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
+				   unsigned long size, unsigned long flags);
+extern void __iounmap_at(void *ea, unsigned long size);
+
+/*
+ * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
+ * which needs some additional definitions here. They basically allow PIO
+ * space overall to be 1GB. This will work as long as we never try to use
+ * iomap to map MMIO below 1GB which should be fine on ppc64
+ */
+#define HAVE_ARCH_PIO_SIZE		1
+#define PIO_OFFSET			0x00000000UL
+#define PIO_MASK			(FULL_IO_SIZE - 1)
+#define PIO_RESERVED			(FULL_IO_SIZE)
+
+#define mmio_read16be(addr)		readw_be(addr)
+#define mmio_read32be(addr)		readl_be(addr)
+#define mmio_write16be(val, addr)	writew_be(val, addr)
+#define mmio_write32be(val, addr)	writel_be(val, addr)
+#define mmio_insb(addr, dst, count)	readsb(addr, dst, count)
+#define mmio_insw(addr, dst, count)	readsw(addr, dst, count)
+#define mmio_insl(addr, dst, count)	readsl(addr, dst, count)
+#define mmio_outsb(addr, src, count)	writesb(addr, src, count)
+#define mmio_outsw(addr, src, count)	writesw(addr, src, count)
+#define mmio_outsl(addr, src, count)	writesl(addr, src, count)
+
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa((unsigned long)address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *)__va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/* We do NOT want virtual merging, it would put too much pressure on
+ * our iommu allocator. Instead, we want drivers to be smart enough
+ * to coalesce sglists that happen to have been mapped in a contiguous
+ * way by the iommu
+ */
+#define BIO_VMERGE_BOUNDARY	0
+
+/*
+ * 32 bits still uses virt_to_bus() for it's implementation of DMA
+ * mappings se we have to keep it defined here. We also have some old
+ * drivers (shame shame shame) that use bus_to_virt() and haven't been
+ * fixed yet so I need to define it here.
+ */
+#ifdef CONFIG_PPC32
+
+static inline unsigned long virt_to_bus(volatile void * address)
+{
+        if (address == NULL)
+		return 0;
+        return __pa(address) + PCI_DRAM_OFFSET;
+}
+
+static inline void * bus_to_virt(unsigned long address)
+{
+        if (address == 0)
+		return NULL;
+        return __va(address - PCI_DRAM_OFFSET);
+}
+
+#define page_to_bus(page)	(page_to_phys(page) + PCI_DRAM_OFFSET)
+
+#endif /* CONFIG_PPC32 */
+
+/* access ports */
+#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))
+#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
+
+#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
+#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
+
+#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
+#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
+
+/* Clear and set bits in one shot.  These macros can be used to clear and
+ * set multiple bits in a register using a single read-modify-write.  These
+ * macros can also be used to set a multiple-bit bit pattern using a mask,
+ * by specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#ifdef __powerpc64__
+#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
+#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
+#endif
+
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
+void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
+				size_t size, unsigned long flags);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_IO_H */
diff --git a/arch/powerpc/include/asm/ioctl.h b/arch/powerpc/include/asm/ioctl.h
new file mode 100644
index 00000000000..57d68304218
--- /dev/null
+++ b/arch/powerpc/include/asm/ioctl.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_POWERPC_IOCTL_H
+#define _ASM_POWERPC_IOCTL_H
+
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+#include <asm-generic/ioctl.h>
+
+#endif	/* _ASM_POWERPC_IOCTL_H */
diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h
new file mode 100644
index 00000000000..279a6229584
--- /dev/null
+++ b/arch/powerpc/include/asm/ioctls.h
@@ -0,0 +1,110 @@
+#ifndef _ASM_POWERPC_IOCTLS_H
+#define _ASM_POWERPC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif	/* _ASM_POWERPC_IOCTLS_H */
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
new file mode 100644
index 00000000000..51ecfef8d84
--- /dev/null
+++ b/arch/powerpc/include/asm/iommu.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IOMMU_H
+#define _ASM_IOMMU_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/machdep.h>
+#include <asm/types.h>
+
+#define IOMMU_PAGE_SHIFT      12
+#define IOMMU_PAGE_SIZE       (ASM_CONST(1) << IOMMU_PAGE_SHIFT)
+#define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
+#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
+
+/* Boot time flags */
+extern int iommu_is_off;
+extern int iommu_force_on;
+
+/* Pure 2^n version of get_order */
+static __inline__ __attribute_const__ int get_iommu_order(unsigned long size)
+{
+	return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1;
+}
+
+
+/*
+ * IOMAP_MAX_ORDER defines the largest contiguous block
+ * of dma space we can get.  IOMAP_MAX_ORDER = 13
+ * allows up to 2**12 pages (4096 * 4096) = 16 MB
+ */
+#define IOMAP_MAX_ORDER		13
+
+struct iommu_table {
+	unsigned long  it_busno;     /* Bus number this table belongs to */
+	unsigned long  it_size;      /* Size of iommu table in entries */
+	unsigned long  it_offset;    /* Offset into global table */
+	unsigned long  it_base;      /* mapped address of tce table */
+	unsigned long  it_index;     /* which iommu table this is */
+	unsigned long  it_type;      /* type: PCI or Virtual Bus */
+	unsigned long  it_blocksize; /* Entries in each block (cacheline) */
+	unsigned long  it_hint;      /* Hint for next alloc */
+	unsigned long  it_largehint; /* Hint for large allocs */
+	unsigned long  it_halfpoint; /* Breaking point for small/large allocs */
+	spinlock_t     it_lock;      /* Protects it_map */
+	unsigned long *it_map;       /* A simple allocation bitmap for now */
+};
+
+struct scatterlist;
+
+/* Frees table for an individual device node */
+extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
+
+/* Initializes an iommu_table based in values set in the passed-in
+ * structure
+ */
+extern struct iommu_table *iommu_init_table(struct iommu_table * tbl,
+					    int nid);
+
+extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+			struct scatterlist *sglist, int nelems,
+			unsigned long mask, enum dma_data_direction direction,
+			struct dma_attrs *attrs);
+extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
+			   int nelems, enum dma_data_direction direction,
+			   struct dma_attrs *attrs);
+
+extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
+				  size_t size, dma_addr_t *dma_handle,
+				  unsigned long mask, gfp_t flag, int node);
+extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
+				   void *vaddr, size_t size, unsigned long mask,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs);
+extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
+			       size_t size, enum dma_data_direction direction,
+			       struct dma_attrs *attrs);
+
+extern void iommu_init_early_pSeries(void);
+extern void iommu_init_early_iSeries(void);
+extern void iommu_init_early_dart(void);
+extern void iommu_init_early_pasemi(void);
+
+#ifdef CONFIG_PCI
+extern void pci_iommu_init(void);
+extern void pci_direct_iommu_init(void);
+#else
+static inline void pci_iommu_init(void) { }
+#endif
+
+extern void alloc_dart_table(void);
+#if defined(CONFIG_PPC64) && defined(CONFIG_PM)
+static inline void iommu_save(void)
+{
+	if (ppc_md.iommu_save)
+		ppc_md.iommu_save();
+}
+
+static inline void iommu_restore(void)
+{
+	if (ppc_md.iommu_restore)
+		ppc_md.iommu_restore();
+}
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IOMMU_H */
diff --git a/arch/powerpc/include/asm/ipcbuf.h b/arch/powerpc/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..2c3e1d94db1
--- /dev/null
+++ b/arch/powerpc/include/asm/ipcbuf.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_POWERPC_IPCBUF_H
+#define _ASM_POWERPC_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for the powerpc is identical to
+ * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the
+ * kernel.  Note extra padding because this structure is passed back
+ * and forth between kernel and user space.  Pad space is left for:
+ *	- 1 32-bit value to fill up for 8-byte alignment
+ *	- 2 miscellaneous 64-bit values
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned int	seq;
+	unsigned int	__pad1;
+	unsigned long long __unused1;
+	unsigned long long __unused2;
+};
+
+#endif /* _ASM_POWERPC_IPCBUF_H */
diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h
new file mode 100644
index 00000000000..fb59829983b
--- /dev/null
+++ b/arch/powerpc/include/asm/ipic.h
@@ -0,0 +1,84 @@
+/*
+ * IPIC external definitions and structure.
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_IPIC_H__
+#define __ASM_IPIC_H__
+
+#include <linux/irq.h>
+
+/* Flags when we init the IPIC */
+#define IPIC_SPREADMODE_GRP_A	0x00000001
+#define IPIC_SPREADMODE_GRP_B	0x00000002
+#define IPIC_SPREADMODE_GRP_C	0x00000004
+#define IPIC_SPREADMODE_GRP_D	0x00000008
+#define IPIC_SPREADMODE_MIX_A	0x00000010
+#define IPIC_SPREADMODE_MIX_B	0x00000020
+#define IPIC_DISABLE_MCP_OUT	0x00000040
+#define IPIC_IRQ0_MCP		0x00000080
+
+/* IPIC registers offsets */
+#define IPIC_SICFR	0x00	/* System Global Interrupt Configuration Register */
+#define IPIC_SIVCR	0x04	/* System Global Interrupt Vector Register */
+#define IPIC_SIPNR_H	0x08	/* System Internal Interrupt Pending Register (HIGH) */
+#define IPIC_SIPNR_L	0x0C	/* System Internal Interrupt Pending Register (LOW) */
+#define IPIC_SIPRR_A	0x10	/* System Internal Interrupt group A Priority Register */
+#define IPIC_SIPRR_B	0x14	/* System Internal Interrupt group B Priority Register */
+#define IPIC_SIPRR_C	0x18	/* System Internal Interrupt group C Priority Register */
+#define IPIC_SIPRR_D	0x1C	/* System Internal Interrupt group D Priority Register */
+#define IPIC_SIMSR_H	0x20	/* System Internal Interrupt Mask Register (HIGH) */
+#define IPIC_SIMSR_L	0x24	/* System Internal Interrupt Mask Register (LOW) */
+#define IPIC_SICNR	0x28	/* System Internal Interrupt Control Register */
+#define IPIC_SEPNR	0x2C	/* System External Interrupt Pending Register */
+#define IPIC_SMPRR_A	0x30	/* System Mixed Interrupt group A Priority Register */
+#define IPIC_SMPRR_B	0x34	/* System Mixed Interrupt group B Priority Register */
+#define IPIC_SEMSR	0x38	/* System External Interrupt Mask Register */
+#define IPIC_SECNR	0x3C	/* System External Interrupt Control Register */
+#define IPIC_SERSR	0x40	/* System Error Status Register */
+#define IPIC_SERMR	0x44	/* System Error Mask Register */
+#define IPIC_SERCR	0x48	/* System Error Control Register */
+#define IPIC_SIFCR_H	0x50	/* System Internal Interrupt Force Register (HIGH) */
+#define IPIC_SIFCR_L	0x54	/* System Internal Interrupt Force Register (LOW) */
+#define IPIC_SEFCR	0x58	/* System External Interrupt Force Register */
+#define IPIC_SERFR	0x5C	/* System Error Force Register */
+#define IPIC_SCVCR	0x60	/* System Critical Interrupt Vector Register */
+#define IPIC_SMVCR	0x64	/* System Management Interrupt Vector Register */
+
+enum ipic_prio_grp {
+	IPIC_INT_GRP_A = IPIC_SIPRR_A,
+	IPIC_INT_GRP_D = IPIC_SIPRR_D,
+	IPIC_MIX_GRP_A = IPIC_SMPRR_A,
+	IPIC_MIX_GRP_B = IPIC_SMPRR_B,
+};
+
+enum ipic_mcp_irq {
+	IPIC_MCP_IRQ0 = 0,
+	IPIC_MCP_WDT  = 1,
+	IPIC_MCP_SBA  = 2,
+	IPIC_MCP_PCI1 = 5,
+	IPIC_MCP_PCI2 = 6,
+	IPIC_MCP_MU   = 7,
+};
+
+extern int ipic_set_priority(unsigned int irq, unsigned int priority);
+extern void ipic_set_highest_priority(unsigned int irq);
+extern void ipic_set_default_priority(void);
+extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq);
+extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
+extern u32 ipic_get_mcp_status(void);
+extern void ipic_clear_mcp_status(u32 mask);
+
+extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
+extern unsigned int ipic_get_irq(void);
+
+#endif /* __ASM_IPIC_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
new file mode 100644
index 00000000000..a372f76836c
--- /dev/null
+++ b/arch/powerpc/include/asm/irq.h
@@ -0,0 +1,366 @@
+#ifdef __KERNEL__
+#ifndef _ASM_POWERPC_IRQ_H
+#define _ASM_POWERPC_IRQ_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+
+#include <asm/types.h>
+#include <asm/atomic.h>
+
+
+#define get_irq_desc(irq) (&irq_desc[(irq)])
+
+/* Define a way to iterate across irqs. */
+#define for_each_irq(i) \
+	for ((i) = 0; (i) < NR_IRQS; ++(i))
+
+extern atomic_t ppc_n_lost_interrupts;
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ			(0)
+
+/* This is a special irq number to return from get_irq() to tell that
+ * no interrupt happened _and_ ignore it (don't count it as bad). Some
+ * platforms like iSeries rely on that.
+ */
+#define NO_IRQ_IGNORE		((unsigned int)-1)
+
+/* Total number of virq in the platform (make it a CONFIG_* option ? */
+#define NR_IRQS		512
+
+/* Number of irqs reserved for the legacy controller */
+#define NUM_ISA_INTERRUPTS	16
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
+/* Interrupt controller "host" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The host
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a host can cover more than one PIC if they have a flat number
+ * model). It's the host callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are fairly agnostic to the fact that
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart host->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
+ */
+struct irq_host;
+struct radix_tree_root;
+
+/* Functions below are provided by the host and called whenever a new mapping
+ * is created or an old mapping is disposed. The host can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
+ */
+struct irq_host_ops {
+	/* Match an interrupt controller device node to a host, returns
+	 * 1 on a match
+	 */
+	int (*match)(struct irq_host *h, struct device_node *node);
+
+	/* Create or update a mapping between a virtual irq number and a hw
+	 * irq number. This is called only once for a given mapping.
+	 */
+	int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
+
+	/* Dispose of such a mapping */
+	void (*unmap)(struct irq_host *h, unsigned int virq);
+
+	/* Update of such a mapping  */
+	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
+
+	/* Translate device-tree interrupt specifier from raw format coming
+	 * from the firmware to a irq_hw_number_t (interrupt line number) and
+	 * type (sense) that can be passed to set_irq_type(). In the absence
+	 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
+	 * will return the hw number in the first cell and IRQ_TYPE_NONE for
+	 * the type (which amount to keeping whatever default value the
+	 * interrupt controller has for that line)
+	 */
+	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
+		     u32 *intspec, unsigned int intsize,
+		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
+};
+
+struct irq_host {
+	struct list_head	link;
+
+	/* type of reverse mapping technique */
+	unsigned int		revmap_type;
+#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
+#define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
+#define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
+#define IRQ_HOST_MAP_TREE	3 /* radix tree */
+	union {
+		struct {
+			unsigned int size;
+			unsigned int *revmap;
+		} linear;
+		struct radix_tree_root tree;
+	} revmap_data;
+	struct irq_host_ops	*ops;
+	void			*host_data;
+	irq_hw_number_t		inval_irq;
+
+	/* Optional device node pointer */
+	struct device_node	*of_node;
+};
+
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+	irq_hw_number_t	hwirq;
+	struct irq_host	*host;
+};
+
+extern struct irq_map_entry irq_map[NR_IRQS];
+
+extern irq_hw_number_t virq_to_hw(unsigned int virq);
+
+/**
+ * irq_alloc_host - Allocate a new irq_host data structure
+ * @of_node: optional device-tree node of the interrupt controller
+ * @revmap_type: type of reverse mapping to use
+ * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
+ * @ops: map/unmap host callbacks
+ * @inval_irq: provide a hw number in that host space that is always invalid
+ *
+ * Allocates and initialize and irq_host structure. Note that in the case of
+ * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
+ * for all legacy interrupts except 0 (which is always the invalid irq for
+ * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
+ * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
+ * later during boot automatically (the reverse mapping will use the slow path
+ * until that happens).
+ */
+extern struct irq_host *irq_alloc_host(struct device_node *of_node,
+				       unsigned int revmap_type,
+				       unsigned int revmap_arg,
+				       struct irq_host_ops *ops,
+				       irq_hw_number_t inval_irq);
+
+
+/**
+ * irq_find_host - Locates a host for a given device node
+ * @node: device-tree node of the interrupt controller
+ */
+extern struct irq_host *irq_find_host(struct device_node *node);
+
+
+/**
+ * irq_set_default_host - Set a "default" host
+ * @host: default host pointer
+ *
+ * For convenience, it's possible to set a "default" host that will be used
+ * whenever NULL is passed to irq_create_mapping(). It makes life easier for
+ * platforms that want to manipulate a few hard coded interrupt numbers that
+ * aren't properly represented in the device-tree.
+ */
+extern void irq_set_default_host(struct irq_host *host);
+
+
+/**
+ * irq_set_virq_count - Set the maximum number of virt irqs
+ * @count: number of linux virtual irqs, capped with NR_IRQS
+ *
+ * This is mainly for use by platforms like iSeries who want to program
+ * the virtual irq number in the controller to avoid the reverse mapping
+ */
+extern void irq_set_virq_count(unsigned int count);
+
+
+/**
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+				       irq_hw_number_t hwirq);
+
+
+/**
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+extern void irq_dispose_mapping(unsigned int virq);
+
+/**
+ * irq_find_mapping - Find a linux virq from an hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a slow path, for use by generic code. It's expected that an
+ * irq controller implementation directly calls the appropriate low level
+ * mapping function.
+ */
+extern unsigned int irq_find_mapping(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/**
+ * irq_create_direct_mapping - Allocate a virq for direct mapping
+ * @host: host to allocate the virq for or NULL for default host
+ *
+ * This routine is used for irq controllers which can choose the hardware
+ * interrupt numbers they generate. In such a case it's simplest to use
+ * the linux virq as the hardware interrupt number.
+ */
+extern unsigned int irq_create_direct_mapping(struct irq_host *host);
+
+/**
+ * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses radix tree
+ * revmaps
+ */
+extern unsigned int irq_radix_revmap(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/**
+ * irq_linear_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses linear
+ * revmaps. It does fallback to the slow path if the revmap doesn't exist
+ * yet and will create the revmap entry with appropriate locking
+ */
+
+extern unsigned int irq_linear_revmap(struct irq_host *host,
+				      irq_hw_number_t hwirq);
+
+
+
+/**
+ * irq_alloc_virt - Allocate virtual irq numbers
+ * @host: host owning these new virtual irqs
+ * @count: number of consecutive numbers to allocate
+ * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
+ *
+ * This is a low level function that is used internally by irq_create_mapping()
+ * and that can be used by some irq controllers implementations for things
+ * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
+ */
+extern unsigned int irq_alloc_virt(struct irq_host *host,
+				   unsigned int count,
+				   unsigned int hint);
+
+/**
+ * irq_free_virt - Free virtual irq numbers
+ * @virq: virtual irq number of the first interrupt to free
+ * @count: number of interrupts to free
+ *
+ * This function is the opposite of irq_alloc_virt. It will not clear reverse
+ * maps, this should be done previously by unmap'ing the interrupt. In fact,
+ * all interrupts covered by the range being freed should have been unmapped
+ * prior to calling this.
+ */
+extern void irq_free_virt(unsigned int virq, unsigned int count);
+
+
+/* -- OF helpers -- */
+
+/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions.
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  u32 *intspec, unsigned int intsize);
+
+
+/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/* -- End OF helpers -- */
+
+/**
+ * irq_early_init - Init irq remapping subsystem
+ */
+extern void irq_early_init(void);
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+extern int distribute_irqs;
+
+struct irqaction;
+struct pt_regs;
+
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+/*
+ * Per-cpu stacks for handling critical, debug and machine check
+ * level interrupts.
+ */
+extern struct thread_info *critirq_ctx[NR_CPUS];
+extern struct thread_info *dbgirq_ctx[NR_CPUS];
+extern struct thread_info *mcheckirq_ctx[NR_CPUS];
+extern void exc_lvl_ctx_init(void);
+#else
+#define exc_lvl_ctx_init()
+#endif
+
+#ifdef CONFIG_IRQSTACKS
+/*
+ * Per-cpu stacks for handling hard and soft interrupts.
+ */
+extern struct thread_info *hardirq_ctx[NR_CPUS];
+extern struct thread_info *softirq_ctx[NR_CPUS];
+
+extern void irq_ctx_init(void);
+extern void call_do_softirq(struct thread_info *tp);
+extern int call_handle_irq(int irq, void *p1,
+			   struct thread_info *tp, void *func);
+#else
+#define irq_ctx_init()
+
+#endif /* CONFIG_IRQSTACKS */
+
+extern void do_IRQ(struct pt_regs *regs);
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/irq_regs.h b/arch/powerpc/include/asm/irq_regs.h
new file mode 100644
index 00000000000..ba94b51a0a7
--- /dev/null
+++ b/arch/powerpc/include/asm/irq_regs.h
@@ -0,0 +1,2 @@
+#include <asm-generic/irq_regs.h>
+
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
new file mode 100644
index 00000000000..5f68ecfdf51
--- /dev/null
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -0,0 +1,43 @@
+/*
+ * IRQ flags handling
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+/*
+ * Get definitions for raw_local_save_flags(x), etc.
+ */
+#include <asm/hw_irq.h>
+
+#else
+#ifdef CONFIG_TRACE_IRQFLAGS
+/*
+ * Most of the CPU's IRQ-state tracing is done from assembly code; we
+ * have to call a C function so call a wrapper that saves all the
+ * C-clobbered registers.
+ */
+#define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
+#define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
+	cmpdi	en,0;				\
+	bne	95f;				\
+	stb	en,PACASOFTIRQEN(r13);		\
+	bl	.trace_hardirqs_off;		\
+	b	skip;				\
+95:	bl	.trace_hardirqs_on;		\
+	li	en,1;
+#define TRACE_AND_RESTORE_IRQ(en)		\
+	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
+	stb	en,PACASOFTIRQEN(r13);	        \
+96:
+#else
+#define TRACE_ENABLE_INTS
+#define TRACE_DISABLE_INTS
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
+#define TRACE_AND_RESTORE_IRQ(en)		\
+	stb	en,PACASOFTIRQEN(r13)
+#endif
+#endif
+
+#endif
diff --git a/arch/powerpc/include/asm/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h
new file mode 100644
index 00000000000..c0cce6727a6
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/alpaca.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright © 2008  Stephen Rothwell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
+#define _ASM_POWERPC_ISERIES_ALPACA_H
+
+/*
+ * This is the part of the paca that the iSeries hypervisor
+ * needs to be statically initialised. Immediately after boot
+ * we switch to the normal Linux paca.
+ */
+struct alpaca {
+	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+	const void *reg_save_ptr;	/* Pointer to LpRegSave for PLIC */
+};
+
+#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h
new file mode 100644
index 00000000000..162d653ad51
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from the OS.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_H
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/paca.h>
+
+/* Type of yield for HvCallBaseYieldProcessor */
+#define HvCall_YieldTimed	0	/* Yield until specified time (tb) */
+#define HvCall_YieldToActive	1	/* Yield until all active procs have run */
+#define HvCall_YieldToProc	2	/* Yield until the specified processor has run */
+
+/* interrupt masks for setEnabledInterrupts */
+#define HvCall_MaskIPI		0x00000001
+#define HvCall_MaskLpEvent	0x00000002
+#define HvCall_MaskLpProd	0x00000004
+#define HvCall_MaskTimeout	0x00000008
+
+/* Log buffer formats */
+#define HvCall_LogBuffer_ASCII          0
+#define HvCall_LogBuffer_EBCDIC         1
+
+#define HvCallBaseAckDeferredInts			HvCallBase +  0
+#define HvCallBaseCpmPowerOff				HvCallBase +  1
+#define HvCallBaseGetHwPatch				HvCallBase +  2
+#define HvCallBaseReIplSpAttn				HvCallBase +  3
+#define HvCallBaseSetASR				HvCallBase +  4
+#define HvCallBaseSetASRAndRfi				HvCallBase +  5
+#define HvCallBaseSetIMR				HvCallBase +  6
+#define HvCallBaseSendIPI				HvCallBase +  7
+#define HvCallBaseTerminateMachine			HvCallBase +  8
+#define HvCallBaseTerminateMachineSrc			HvCallBase +  9
+#define HvCallBaseProcessPlicInterrupts			HvCallBase + 10
+#define HvCallBaseIsPrimaryCpmOrMsdIpl			HvCallBase + 11
+#define HvCallBaseSetVirtualSIT				HvCallBase + 12
+#define HvCallBaseVaryOffThisProcessor			HvCallBase + 13
+#define HvCallBaseVaryOffMemoryChunk			HvCallBase + 14
+#define HvCallBaseVaryOffInteractivePercentage		HvCallBase + 15
+#define HvCallBaseSendLpProd				HvCallBase + 16
+#define HvCallBaseSetEnabledInterrupts			HvCallBase + 17
+#define HvCallBaseYieldProcessor			HvCallBase + 18
+#define HvCallBaseVaryOffSharedProcUnits		HvCallBase + 19
+#define HvCallBaseSetVirtualDecr			HvCallBase + 20
+#define HvCallBaseClearLogBuffer			HvCallBase + 21
+#define HvCallBaseGetLogBufferCodePage			HvCallBase + 22
+#define HvCallBaseGetLogBufferFormat			HvCallBase + 23
+#define HvCallBaseGetLogBufferLength			HvCallBase + 24
+#define HvCallBaseReadLogBuffer				HvCallBase + 25
+#define HvCallBaseSetLogBufferFormatAndCodePage		HvCallBase + 26
+#define HvCallBaseWriteLogBuffer			HvCallBase + 27
+#define HvCallBaseRouter28				HvCallBase + 28
+#define HvCallBaseRouter29				HvCallBase + 29
+#define HvCallBaseRouter30				HvCallBase + 30
+#define HvCallBaseSetDebugBus				HvCallBase + 31
+
+#define HvCallCcSetDABR					HvCallCc + 7
+
+static inline void HvCall_setVirtualDecr(void)
+{
+	/*
+	 * Ignore any error return codes - most likely means that the
+	 * target value for the LP has been increased and this vary off
+	 * would bring us below the new target.
+	 */
+	HvCall0(HvCallBaseSetVirtualDecr);
+}
+
+static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm)
+{
+	HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm);
+}
+
+static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts)
+{
+	HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts);
+}
+
+static inline void HvCall_setLogBufferFormatAndCodepage(int format,
+		u32 codePage)
+{
+	HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage);
+}
+
+extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen);
+
+static inline void HvCall_sendIPI(struct paca_struct *targetPaca)
+{
+	HvCall1(HvCallBaseSendIPI, targetPaca->paca_index);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h
new file mode 100644
index 00000000000..cc029d388e1
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_event.h
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from the OS.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/abs_addr.h>
+
+struct HvLpEvent;
+
+typedef u8 HvLpEvent_Type;
+typedef u8 HvLpEvent_AckInd;
+typedef u8 HvLpEvent_AckType;
+
+typedef u8 HvLpDma_Direction;
+typedef u8 HvLpDma_AddressType;
+
+typedef u64 HvLpEvent_Rc;
+typedef u64 HvLpDma_Rc;
+
+#define HvCallEventAckLpEvent				HvCallEvent +  0
+#define HvCallEventCancelLpEvent			HvCallEvent +  1
+#define HvCallEventCloseLpEventPath			HvCallEvent +  2
+#define HvCallEventDmaBufList				HvCallEvent +  3
+#define HvCallEventDmaSingle				HvCallEvent +  4
+#define HvCallEventDmaToSp				HvCallEvent +  5
+#define HvCallEventGetOverflowLpEvents			HvCallEvent +  6
+#define HvCallEventGetSourceLpInstanceId		HvCallEvent +  7
+#define HvCallEventGetTargetLpInstanceId		HvCallEvent +  8
+#define HvCallEventOpenLpEventPath			HvCallEvent +  9
+#define HvCallEventSetLpEventStack			HvCallEvent + 10
+#define HvCallEventSignalLpEvent			HvCallEvent + 11
+#define HvCallEventSignalLpEventParms			HvCallEvent + 12
+#define HvCallEventSetInterLpQueueIndex			HvCallEvent + 13
+#define HvCallEventSetLpEventQueueInterruptProc		HvCallEvent + 14
+#define HvCallEventRouter15				HvCallEvent + 15
+
+static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex)
+{
+	HvCall1(HvCallEventGetOverflowLpEvents, queueIndex);
+}
+
+static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex)
+{
+	HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex);
+}
+
+static inline void HvCallEvent_setLpEventStack(u8 queueIndex,
+		char *eventStackAddr, u32 eventStackSize)
+{
+	HvCall3(HvCallEventSetLpEventStack, queueIndex,
+			virt_to_abs(eventStackAddr), eventStackSize);
+}
+
+static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex,
+		u16 lpLogicalProcIndex)
+{
+	HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex,
+			lpLogicalProcIndex);
+}
+
+static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp,
+		HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd,
+		HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId,
+		HvLpInstanceId targetInstanceId, u64 correlationToken,
+		u64 eventData1, u64 eventData2, u64 eventData3,
+		u64 eventData4, u64 eventData5)
+{
+	/* Pack the misc bits into a single Dword to pass to PLIC */
+	union {
+		struct {
+			u8		ack_and_target;
+			u8		type;
+			u16		subtype;
+			HvLpInstanceId	src_inst;
+			HvLpInstanceId	target_inst;
+		} parms;
+		u64		dword;
+	} packed;
+
+	packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp;
+	packed.parms.type = type;
+	packed.parms.subtype = subtype;
+	packed.parms.src_inst = sourceInstanceId;
+	packed.parms.target_inst = targetInstanceId;
+
+	return HvCall7(HvCallEventSignalLpEventParms, packed.dword,
+			correlationToken, eventData1, eventData2,
+			eventData3, eventData4, eventData5);
+}
+
+extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag);
+extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iseries_hv_map(void *vaddr, size_t size,
+			enum dma_data_direction direction);
+extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction);
+
+static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId(
+		HvLpIndex targetLp, HvLpEvent_Type type)
+{
+	return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type);
+}
+
+static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId(
+		HvLpIndex targetLp, HvLpEvent_Type type)
+{
+	return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type);
+}
+
+static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp,
+		HvLpEvent_Type type)
+{
+	HvCall2(HvCallEventOpenLpEventPath, targetLp, type);
+}
+
+static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp,
+		HvLpEvent_Type type)
+{
+	HvCall2(HvCallEventCloseLpEventPath, targetLp, type);
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type,
+		HvLpIndex remoteLp, HvLpDma_Direction direction,
+		HvLpInstanceId localInstanceId,
+		HvLpInstanceId remoteInstanceId,
+		HvLpDma_AddressType localAddressType,
+		HvLpDma_AddressType remoteAddressType,
+		/* Do these need to be converted to absolute addresses? */
+		u64 localBufList, u64 remoteBufList, u32 transferLength)
+{
+	/* Pack the misc bits into a single Dword to pass to PLIC */
+	union {
+		struct {
+			u8		flags;
+			HvLpIndex	remote;
+			u8		type;
+			u8		reserved;
+			HvLpInstanceId	local_inst;
+			HvLpInstanceId	remote_inst;
+		} parms;
+		u64		dword;
+	} packed;
+
+	packed.parms.flags = (direction << 7) |
+		(localAddressType << 6) | (remoteAddressType << 5);
+	packed.parms.remote = remoteLp;
+	packed.parms.type = type;
+	packed.parms.reserved = 0;
+	packed.parms.local_inst = localInstanceId;
+	packed.parms.remote_inst = remoteInstanceId;
+
+	return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList,
+			remoteBufList, transferLength);
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote,
+		u32 length, HvLpDma_Direction dir)
+{
+	return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote,
+			length, dir);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h
new file mode 100644
index 00000000000..f5d21095925
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_sc.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H
+
+#include <linux/types.h>
+
+#define HvCallBase		0x8000000000000000ul
+#define HvCallCc		0x8001000000000000ul
+#define HvCallCfg		0x8002000000000000ul
+#define HvCallEvent		0x8003000000000000ul
+#define HvCallHpt		0x8004000000000000ul
+#define HvCallPci		0x8005000000000000ul
+#define HvCallSm		0x8007000000000000ul
+#define HvCallXm		0x8009000000000000ul
+
+extern u64 HvCall0(u64);
+extern u64 HvCall1(u64, u64);
+extern u64 HvCall2(u64, u64, u64);
+extern u64 HvCall3(u64, u64, u64, u64);
+extern u64 HvCall4(u64, u64, u64, u64, u64);
+extern u64 HvCall5(u64, u64, u64, u64, u64, u64);
+extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64);
+extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64);
+
+extern u64 HvCall0Ret16(u64, void *);
+extern u64 HvCall1Ret16(u64, void *, u64);
+extern u64 HvCall2Ret16(u64, void *, u64, u64);
+extern u64 HvCall3Ret16(u64, void *, u64, u64, u64);
+extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64);
+extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64);
+extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64);
+extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64);
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h
new file mode 100644
index 00000000000..392ac3f54df
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_xm.h
@@ -0,0 +1,61 @@
+/*
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from SLIC.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+
+#define HvCallXmGetTceTableParms	HvCallXm +  0
+#define HvCallXmTestBus			HvCallXm +  1
+#define HvCallXmConnectBusUnit		HvCallXm +  2
+#define HvCallXmLoadTod			HvCallXm +  8
+#define HvCallXmTestBusUnit		HvCallXm +  9
+#define HvCallXmSetTce			HvCallXm + 11
+#define HvCallXmSetTces			HvCallXm + 13
+
+static inline void HvCallXm_getTceTableParms(u64 cb)
+{
+	HvCall1(HvCallXmGetTceTableParms, cb);
+}
+
+static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce)
+{
+	return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce);
+}
+
+static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset,
+		u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4)
+{
+	return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces,
+			     tce1, tce2, tce3, tce4);
+}
+
+static inline u64 HvCallXm_testBus(u16 busNumber)
+{
+	return HvCall1(HvCallXmTestBus, busNumber);
+}
+
+static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber,
+		u8 deviceId)
+{
+	return HvCall2(HvCallXmTestBusUnit, busNumber,
+			(subBusNumber << 8) | deviceId);
+}
+
+static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber,
+		u8 deviceId, u64 interruptToken)
+{
+	return HvCall5(HvCallXmConnectBusUnit, busNumber,
+			(subBusNumber << 8) | deviceId, interruptToken, 0,
+			0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */);
+}
+
+static inline u64 HvCallXm_loadTod(void)
+{
+	return HvCall0(HvCallXmLoadTod);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h
new file mode 100644
index 00000000000..a006fd1e4a2
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_lp_config.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
+#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
+
+/*
+ * This file contains the interface to the LPAR configuration data
+ * to determine which resources should be allocated to each partition.
+ */
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+
+enum {
+	HvCallCfg_Cur	= 0,
+	HvCallCfg_Init	= 1,
+	HvCallCfg_Max	= 2,
+	HvCallCfg_Min	= 3
+};
+
+#define HvCallCfgGetSystemPhysicalProcessors		HvCallCfg +  6
+#define HvCallCfgGetPhysicalProcessors			HvCallCfg +  7
+#define HvCallCfgGetMsChunks				HvCallCfg +  9
+#define HvCallCfgGetSharedPoolIndex			HvCallCfg + 20
+#define HvCallCfgGetSharedProcUnits			HvCallCfg + 21
+#define HvCallCfgGetNumProcsInSharedPool		HvCallCfg + 22
+#define HvCallCfgGetVirtualLanIndexMap			HvCallCfg + 30
+#define HvCallCfgGetHostingLpIndex			HvCallCfg + 32
+
+extern HvLpIndex HvLpConfig_getLpIndex_outline(void);
+extern HvLpIndex HvLpConfig_getLpIndex(void);
+extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void);
+
+static inline u64 HvLpConfig_getMsChunks(void)
+{
+	return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline u64 HvLpConfig_getSystemPhysicalProcessors(void)
+{
+	return HvCall0(HvCallCfgGetSystemPhysicalProcessors);
+}
+
+static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI)
+{
+	return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI);
+}
+
+static inline u64 HvLpConfig_getPhysicalProcessors(void)
+{
+	return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void)
+{
+	return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex());
+}
+
+static inline u64 HvLpConfig_getSharedProcUnits(void)
+{
+	return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline u64 HvLpConfig_getMaxSharedProcUnits(void)
+{
+	return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
+			HvCallCfg_Max);
+}
+
+static inline u64 HvLpConfig_getMaxPhysicalProcessors(void)
+{
+	return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
+			HvCallCfg_Max);
+}
+
+static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp(
+		HvLpIndex lp)
+{
+	/*
+	 * This is a new function in V5R1 so calls to this on older
+	 * hypervisors will return -1
+	 */
+	u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp);
+	if (retVal == -1)
+		retVal = 0;
+	return retVal;
+}
+
+static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void)
+{
+	return HvLpConfig_getVirtualLanIndexMapForLp(
+			HvLpConfig_getLpIndex_outline());
+}
+
+static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1,
+		HvLpIndex lp2)
+{
+	HvLpVirtualLanIndexMap virtualLanIndexMap1 =
+		HvLpConfig_getVirtualLanIndexMapForLp(lp1);
+	HvLpVirtualLanIndexMap virtualLanIndexMap2 =
+		HvLpConfig_getVirtualLanIndexMapForLp(lp2);
+	return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0);
+}
+
+static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp)
+{
+	return HvCall1(HvCallCfgGetHostingLpIndex, lp);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h
new file mode 100644
index 00000000000..8f5da7d7720
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_lp_event.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/* This file contains the class for HV events in the system. */
+
+#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
+#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_call_event.h>
+
+/*
+ * HvLpEvent is the structure for Lp Event messages passed between
+ * partitions through PLIC.
+ */
+
+struct HvLpEvent {
+	u8	flags;			/* Event flags		      x00-x00 */
+	u8	xType;			/* Type of message	      x01-x01 */
+	u16	xSubtype;		/* Subtype for event	      x02-x03 */
+	u8	xSourceLp;		/* Source LP		      x04-x04 */
+	u8	xTargetLp;		/* Target LP		      x05-x05 */
+	u8	xSizeMinus1;		/* Size of Derived class - 1  x06-x06 */
+	u8	xRc;			/* RC for Ack flows	      x07-x07 */
+	u16	xSourceInstanceId;	/* Source sides instance id   x08-x09 */
+	u16	xTargetInstanceId;	/* Target sides instance id   x0A-x0B */
+	union {
+		u32	xSubtypeData;	/* Data usable by the subtype x0C-x0F */
+		u16	xSubtypeDataShort[2];	/* Data as 2 shorts */
+		u8	xSubtypeDataChar[4];	/* Data as 4 chars */
+	} x;
+
+	u64	xCorrelationToken;	/* Unique value for source/type x10-x17 */
+};
+
+typedef void (*LpEventHandler)(struct HvLpEvent *);
+
+/* Register a handler for an event type - returns 0 on success */
+extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType,
+		LpEventHandler hdlr);
+
+/*
+ * Unregister a handler for an event type
+ *
+ * This call will sleep until the handler being removed is guaranteed to
+ * be no longer executing on any CPU. Do not call with locks held.
+ *
+ *  returns 0 on success
+ *  Unregister will fail if there are any paths open for the type
+ */
+extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType);
+
+/*
+ * Open an Lp Event Path for an event type
+ * returns 0 on success
+ * openPath will fail if there is no handler registered for the event type.
+ * The lpIndex specified is the partition index for the target partition
+ * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero)
+ */
+extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
+
+/*
+ * Close an Lp Event Path for a type and partition
+ * returns 0 on success
+ */
+extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
+
+#define HvLpEvent_Type_Hypervisor 0
+#define HvLpEvent_Type_MachineFac 1
+#define HvLpEvent_Type_SessionMgr 2
+#define HvLpEvent_Type_SpdIo      3
+#define HvLpEvent_Type_VirtualBus 4
+#define HvLpEvent_Type_PciIo      5
+#define HvLpEvent_Type_RioIo      6
+#define HvLpEvent_Type_VirtualLan 7
+#define HvLpEvent_Type_VirtualIo  8
+#define HvLpEvent_Type_NumTypes   9
+
+#define HvLpEvent_Rc_Good 0
+#define HvLpEvent_Rc_BufferNotAvailable 1
+#define HvLpEvent_Rc_Cancelled 2
+#define HvLpEvent_Rc_GenericError 3
+#define HvLpEvent_Rc_InvalidAddress 4
+#define HvLpEvent_Rc_InvalidPartition 5
+#define HvLpEvent_Rc_InvalidSize 6
+#define HvLpEvent_Rc_InvalidSubtype 7
+#define HvLpEvent_Rc_InvalidSubtypeData 8
+#define HvLpEvent_Rc_InvalidType 9
+#define HvLpEvent_Rc_PartitionDead 10
+#define HvLpEvent_Rc_PathClosed 11
+#define HvLpEvent_Rc_SubtypeError 12
+
+#define HvLpEvent_Function_Ack 0
+#define HvLpEvent_Function_Int 1
+
+#define HvLpEvent_AckInd_NoAck 0
+#define HvLpEvent_AckInd_DoAck 1
+
+#define HvLpEvent_AckType_ImmediateAck 0
+#define HvLpEvent_AckType_DeferredAck 1
+
+#define HV_LP_EVENT_INT			0x01
+#define HV_LP_EVENT_DO_ACK		0x02
+#define HV_LP_EVENT_DEFERRED_ACK	0x04
+#define HV_LP_EVENT_VALID		0x80
+
+#define HvLpDma_Direction_LocalToRemote 0
+#define HvLpDma_Direction_RemoteToLocal 1
+
+#define HvLpDma_AddressType_TceIndex 0
+#define HvLpDma_AddressType_RealAddress 1
+
+#define HvLpDma_Rc_Good 0
+#define HvLpDma_Rc_Error 1
+#define HvLpDma_Rc_PartitionDead 2
+#define HvLpDma_Rc_PathClosed 3
+#define HvLpDma_Rc_InvalidAddress 4
+#define HvLpDma_Rc_InvalidLength 5
+
+static inline int hvlpevent_is_valid(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_VALID;
+}
+
+static inline void hvlpevent_invalidate(struct HvLpEvent *h)
+{
+	h->flags &= ~ HV_LP_EVENT_VALID;
+}
+
+static inline int hvlpevent_is_int(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_INT;
+}
+
+static inline int hvlpevent_is_ack(struct HvLpEvent *h)
+{
+	return !hvlpevent_is_int(h);
+}
+
+static inline int hvlpevent_need_ack(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_DO_ACK;
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h
new file mode 100644
index 00000000000..c3e6d2a1d1c
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_types.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H
+#define _ASM_POWERPC_ISERIES_HV_TYPES_H
+
+/*
+ * General typedefs for the hypervisor.
+ */
+
+#include <asm/types.h>
+
+typedef u8	HvLpIndex;
+typedef u16	HvLpInstanceId;
+typedef u64	HvLpTOD;
+typedef u64	HvLpSystemSerialNum;
+typedef u8	HvLpDeviceSerialNum[12];
+typedef u16	HvLpSanHwSet;
+typedef u16	HvLpBus;
+typedef u16	HvLpBoard;
+typedef u16	HvLpCard;
+typedef u8	HvLpDeviceType[4];
+typedef u8	HvLpDeviceModel[3];
+typedef u64	HvIoToken;
+typedef u8	HvLpName[8];
+typedef u32	HvIoId;
+typedef u64	HvRealMemoryIndex;
+typedef u32	HvLpIndexMap;	/* Must hold HVMAXARCHITECTEDLPS bits!!! */
+typedef u16	HvLpVrmIndex;
+typedef u32	HvXmGenerationId;
+typedef u8	HvLpBusPool;
+typedef u8	HvLpSharedPoolIndex;
+typedef u16	HvLpSharedProcUnitsX100;
+typedef u8	HvLpVirtualLanIndex;
+typedef u16	HvLpVirtualLanIndexMap;	/* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */
+typedef u16	HvBusNumber;	/* Hypervisor Bus Number */
+typedef u8	HvSubBusNumber;	/* Hypervisor SubBus Number */
+typedef u8	HvAgentId;	/* Hypervisor DevFn */
+
+
+#define HVMAXARCHITECTEDLPS		32
+#define HVMAXARCHITECTEDVIRTUALLANS	16
+#define HVMAXARCHITECTEDVIRTUALDISKS	32
+#define HVMAXARCHITECTEDVIRTUALCDROMS	8
+#define HVMAXARCHITECTEDVIRTUALTAPES	8
+#define HVCHUNKSIZE			(256 * 1024)
+#define HVPAGESIZE			(4 * 1024)
+#define HVLPMINMEGSPRIMARY		256
+#define HVLPMINMEGSSECONDARY		64
+#define HVCHUNKSPERMEG			4
+#define HVPAGESPERMEG			256
+#define HVPAGESPERCHUNK			64
+
+#define HvLpIndexInvalid		((HvLpIndex)0xff)
+
+/*
+ * Enums for the sub-components under PLIC
+ * Used in HvCall  and HvPrimaryCall
+ */
+enum {
+	HvCallCompId = 0,
+	HvCallCpuCtlsCompId = 1,
+	HvCallCfgCompId = 2,
+	HvCallEventCompId = 3,
+	HvCallHptCompId = 4,
+	HvCallPciCompId = 5,
+	HvCallSlmCompId = 6,
+	HvCallSmCompId = 7,
+	HvCallSpdCompId = 8,
+	HvCallXmCompId = 9,
+	HvCallRioCompId = 10,
+	HvCallRsvd3CompId = 11,
+	HvCallRsvd2CompId = 12,
+	HvCallRsvd1CompId = 13,
+	HvCallMaxCompId = 14,
+	HvPrimaryCallCompId = 0,
+	HvPrimaryCallCfgCompId = 1,
+	HvPrimaryCallPciCompId = 2,
+	HvPrimaryCallSmCompId = 3,
+	HvPrimaryCallSpdCompId = 4,
+	HvPrimaryCallXmCompId = 5,
+	HvPrimaryCallRioCompId = 6,
+	HvPrimaryCallRsvd7CompId = 7,
+	HvPrimaryCallRsvd6CompId = 8,
+	HvPrimaryCallRsvd5CompId = 9,
+	HvPrimaryCallRsvd4CompId = 10,
+	HvPrimaryCallRsvd3CompId = 11,
+	HvPrimaryCallRsvd2CompId = 12,
+	HvPrimaryCallRsvd1CompId = 13,
+	HvPrimaryCallMaxCompId = HvCallMaxCompId
+};
+
+struct HvLpBufferList {
+	u64 addr;
+	u64 len;
+};
+
+#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */
diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
new file mode 100644
index 00000000000..c59ee7e4bed
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/iommu.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_POWERPC_ISERIES_IOMMU_H
+#define _ASM_POWERPC_ISERIES_IOMMU_H
+
+/*
+ * Copyright (C) 2005  Stephen Rothwell, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the:
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330,
+ * Boston, MA  02111-1307  USA
+ */
+
+struct pci_dev;
+struct vio_dev;
+struct device_node;
+struct iommu_table;
+
+/* Creates table for an individual device node */
+extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
+				       struct device_node *dn);
+
+/* Get table parameters from HV */
+extern void iommu_table_getparms_iSeries(unsigned long busno,
+		unsigned char slotno, unsigned char virtbus,
+		struct iommu_table *tbl);
+
+extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev);
+extern void iommu_vio_init(void);
+
+#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */
diff --git a/arch/powerpc/include/asm/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h
new file mode 100644
index 00000000000..42827883882
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/it_lp_queue.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
+#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
+
+/*
+ *	This control block defines the simple LP queue structure that is
+ *	shared between the hypervisor (PLIC) and the OS in order to send
+ *	events to an LP.
+ */
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+
+#define IT_LP_MAX_QUEUES	8
+
+#define IT_LP_NOT_USED		0	/* Queue will not be used by PLIC */
+#define IT_LP_DEDICATED_IO	1	/* Queue dedicated to IO processor specified */
+#define IT_LP_DEDICATED_LP	2	/* Queue dedicated to LP specified */
+#define IT_LP_SHARED		3	/* Queue shared for both IO and LP */
+
+#define IT_LP_EVENT_STACK_SIZE	4096
+#define IT_LP_EVENT_MAX_SIZE	256
+#define IT_LP_EVENT_ALIGN	64
+
+struct hvlpevent_queue {
+/*
+ * The hq_current_event is the pointer to the next event stack entry
+ * that will become valid.  The OS must peek at this entry to determine
+ * if it is valid.  PLIC will set the valid indicator as the very last
+ * store into that entry.
+ *
+ * When the OS has completed processing of the event then it will mark
+ * the event as invalid so that PLIC knows it can store into that event
+ * location again.
+ *
+ * If the event stack fills and there are overflow events, then PLIC
+ * will set the hq_overflow_pending flag in which case the OS will
+ * have to fetch the additional LP events once they have drained the
+ * event stack.
+ *
+ * The first 16-bytes are known by both the OS and PLIC.  The remainder
+ * of the cache line is for use by the OS.
+ */
+	u8		hq_overflow_pending;	/* 0x00 Overflow events are pending */
+	u8		hq_status;		/* 0x01 DedicatedIo or DedicatedLp or NotUsed */
+	u16		hq_proc_index;		/* 0x02 Logical Proc Index for correlation */
+	u8		hq_reserved1[12];	/* 0x04 */
+	char		*hq_current_event;	/* 0x10 */
+	char		*hq_last_event;		/* 0x18 */
+	char		*hq_event_stack;	/* 0x20 */
+	u8		hq_index;		/* 0x28 unique sequential index. */
+	u8		hq_reserved2[3];	/* 0x29-2b */
+	spinlock_t	hq_lock;
+};
+
+extern struct hvlpevent_queue hvlpevent_queue;
+
+extern int hvlpevent_is_pending(void);
+extern void process_hvlpevents(void);
+extern void setup_hvlpevent_queue(void);
+
+#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */
diff --git a/arch/powerpc/include/asm/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h
new file mode 100644
index 00000000000..5e9f3e128ee
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/lpar_map.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H
+#define _ASM_POWERPC_ISERIES_LPAR_MAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#endif
+
+/*
+ * The iSeries hypervisor will set up mapping for one or more
+ * ESID/VSID pairs (in SLB/segment registers) and will set up
+ * mappings of one or more ranges of pages to VAs.
+ * We will have the hypervisor set up the ESID->VSID mapping
+ * for the four kernel segments (C-F).  With shared processors,
+ * the hypervisor will clear all segment registers and reload
+ * these four whenever the processor is switched from one
+ * partition to another.
+ */
+
+/* The Vsid and Esid identified below will be used by the hypervisor
+ * to set up a memory mapping for part of the load area before giving
+ * control to the Linux kernel.  The load area is 64 MB, but this must
+ * not attempt to map the whole load area.  The Hashed Page Table may
+ * need to be located within the load area (if the total partition size
+ * is 64 MB), but cannot be mapped.  Typically, this should specify
+ * to map half (32 MB) of the load area.
+ *
+ * The hypervisor will set up page table entries for the number of
+ * pages specified.
+ *
+ * In 32-bit mode, the hypervisor will load all four of the
+ * segment registers (identified by the low-order four bits of the
+ * Esid field.  In 64-bit mode, the hypervisor will load one SLB
+ * entry to map the Esid to the Vsid.
+*/
+
+#define HvEsidsToMap	2
+#define HvRangesToMap	1
+
+/* Hypervisor initially maps 32MB of the load area */
+#define HvPagesToMap	8192
+
+#ifndef __ASSEMBLY__
+struct LparMap {
+	u64	xNumberEsids;	// Number of ESID/VSID pairs
+	u64	xNumberRanges;	// Number of VA ranges to map
+	u64	xSegmentTableOffs; // Page number within load area of seg table
+	u64	xRsvd[5];
+	struct {
+		u64	xKernelEsid;	// Esid used to map kernel load
+		u64	xKernelVsid;	// Vsid used to map kernel load
+	} xEsids[HvEsidsToMap];
+	struct {
+		u64	xPages;		// Number of pages to be mapped
+		u64	xOffset;	// Offset from start of load area
+		u64	xVPN;		// Virtual Page Number
+	} xRanges[HvRangesToMap];
+};
+
+extern const struct LparMap	xLparMap;
+
+#endif /* __ASSEMBLY__ */
+
+/* the fixed address where the LparMap exists */
+#define LPARMAP_PHYS		0x7000
+
+#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */
diff --git a/arch/powerpc/include/asm/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h
new file mode 100644
index 00000000000..eb851a9c9e5
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/mf.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2001  Troy D. Armstrong IBM Corporation
+ * Copyright (C) 2004  Stephen Rothwell IBM Corporation
+ *
+ * This modules exists as an interface between a Linux secondary partition
+ * running on an iSeries and the primary partition's Virtual Service
+ * Processor (VSP) object.  The VSP has final authority over powering on/off
+ * all partitions in the iSeries.  It also provides miscellaneous low-level
+ * machine facility type operations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_MF_H
+#define _ASM_POWERPC_ISERIES_MF_H
+
+#include <linux/types.h>
+
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_call_event.h>
+
+struct rtc_time;
+
+typedef void (*MFCompleteHandler)(void *clientToken, int returnCode);
+
+extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
+		unsigned size, unsigned amount, MFCompleteHandler hdlr,
+		void *userToken);
+extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
+		unsigned count, MFCompleteHandler hdlr, void *userToken);
+
+extern void mf_power_off(void);
+extern void mf_reboot(char *cmd);
+
+extern void mf_display_src(u32 word);
+extern void mf_display_progress(u16 value);
+
+extern void mf_init(void);
+
+#endif /* _ASM_POWERPC_ISERIES_MF_H */
diff --git a/arch/powerpc/include/asm/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h
new file mode 100644
index 00000000000..f9ac0d00b95
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/vio.h
@@ -0,0 +1,265 @@
+/* -*- linux-c -*-
+ *
+ *  iSeries Virtual I/O Message Path header
+ *
+ *  Authors: Dave Boutcher <boutcher@us.ibm.com>
+ *           Ryan Arnold <ryanarn@us.ibm.com>
+ *           Colin Devilbiss <devilbis@us.ibm.com>
+ *
+ * (C) Copyright 2000 IBM Corporation
+ *
+ * This header file is used by the iSeries virtual I/O device
+ * drivers.  It defines the interfaces to the common functions
+ * (implemented in drivers/char/viopath.h) as well as defining
+ * common functions and structures.  Currently (at the time I
+ * wrote this comment) the iSeries virtual I/O device drivers
+ * that use this are
+ *   drivers/block/viodasd.c
+ *   drivers/char/viocons.c
+ *   drivers/char/viotape.c
+ *   drivers/cdrom/viocd.c
+ *
+ * The iSeries virtual ethernet support (veth.c) uses a whole
+ * different set of functions.
+ *
+ * This program is free software;  you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) anyu later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef _ASM_POWERPC_ISERIES_VIO_H
+#define _ASM_POWERPC_ISERIES_VIO_H
+
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_lp_event.h>
+
+/*
+ * iSeries virtual I/O events use the subtype field in
+ * HvLpEvent to figure out what kind of vio event is coming
+ * in.  We use a table to route these, and this defines
+ * the maximum number of distinct subtypes
+ */
+#define VIO_MAX_SUBTYPES 8
+
+#define VIOMAXBLOCKDMA	12
+
+struct open_data {
+	u64	disk_size;
+	u16	max_disk;
+	u16	cylinders;
+	u16	tracks;
+	u16	sectors;
+	u16	bytes_per_sector;
+};
+
+struct rw_data {
+	u64	offset;
+	struct {
+		u32	token;
+		u32	reserved;
+		u64	len;
+	} dma_info[VIOMAXBLOCKDMA];
+};
+
+struct vioblocklpevent {
+	struct HvLpEvent	event;
+	u32			reserved;
+	u16			version;
+	u16			sub_result;
+	u16			disk;
+	u16			flags;
+	union {
+		struct open_data	open_data;
+		struct rw_data		rw_data;
+		u64			changed;
+	} u;
+};
+
+#define vioblockflags_ro   0x0001
+
+enum vioblocksubtype {
+	vioblockopen = 0x0001,
+	vioblockclose = 0x0002,
+	vioblockread = 0x0003,
+	vioblockwrite = 0x0004,
+	vioblockflush = 0x0005,
+	vioblockcheck = 0x0007
+};
+
+struct viocdlpevent {
+	struct HvLpEvent	event;
+	u32			reserved;
+	u16			version;
+	u16			sub_result;
+	u16			disk;
+	u16			flags;
+	u32			token;
+	u64			offset;		/* On open, max number of disks */
+	u64			len;		/* On open, size of the disk */
+	u32			block_size;	/* Only set on open */
+	u32			media_size;	/* Only set on open */
+};
+
+enum viocdsubtype {
+	viocdopen = 0x0001,
+	viocdclose = 0x0002,
+	viocdread = 0x0003,
+	viocdwrite = 0x0004,
+	viocdlockdoor = 0x0005,
+	viocdgetinfo = 0x0006,
+	viocdcheck = 0x0007
+};
+
+struct viotapelpevent {
+	struct HvLpEvent event;
+	u32 reserved;
+	u16 version;
+	u16 sub_type_result;
+	u16 tape;
+	u16 flags;
+	u32 token;
+	u64 len;
+	union {
+		struct {
+			u32 tape_op;
+			u32 count;
+		} op;
+		struct {
+			u32 type;
+			u32 resid;
+			u32 dsreg;
+			u32 gstat;
+			u32 erreg;
+			u32 file_no;
+			u32 block_no;
+		} get_status;
+		struct {
+			u32 block_no;
+		} get_pos;
+	} u;
+};
+
+enum viotapesubtype {
+	viotapeopen = 0x0001,
+	viotapeclose = 0x0002,
+	viotaperead = 0x0003,
+	viotapewrite = 0x0004,
+	viotapegetinfo = 0x0005,
+	viotapeop = 0x0006,
+	viotapegetpos = 0x0007,
+	viotapesetpos = 0x0008,
+	viotapegetstatus = 0x0009
+};
+
+/*
+ * Each subtype can register a handler to process their events.
+ * The handler must have this interface.
+ */
+typedef void (vio_event_handler_t) (struct HvLpEvent * event);
+
+extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq);
+extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq);
+extern int vio_setHandler(int subtype, vio_event_handler_t * beh);
+extern int vio_clearHandler(int subtype);
+extern int viopath_isactive(HvLpIndex lp);
+extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp);
+extern HvLpInstanceId viopath_targetinst(HvLpIndex lp);
+extern void vio_set_hostlp(void);
+extern void *vio_get_event_buffer(int subtype);
+extern void vio_free_event_buffer(int subtype, void *buffer);
+
+extern struct vio_dev *vio_create_viodasd(u32 unit);
+
+extern HvLpIndex viopath_hostLp;
+extern HvLpIndex viopath_ourLp;
+
+#define VIOCHAR_MAX_DATA	200
+
+#define VIOMAJOR_SUBTYPE_MASK	0xff00
+#define VIOMINOR_SUBTYPE_MASK	0x00ff
+#define VIOMAJOR_SUBTYPE_SHIFT	8
+
+#define VIOVERSION		0x0101
+
+/*
+ * This is the general structure for VIO errors; each module should have
+ * a table of them, and each table should be terminated by an entry of
+ * { 0, 0, NULL }.  Then, to find a specific error message, a module
+ * should pass its local table and the return code.
+ */
+struct vio_error_entry {
+	u16 rc;
+	int errno;
+	const char *msg;
+};
+extern const struct vio_error_entry *vio_lookup_rc(
+		const struct vio_error_entry *local_table, u16 rc);
+
+enum viosubtypes {
+	viomajorsubtype_monitor = 0x0100,
+	viomajorsubtype_blockio = 0x0200,
+	viomajorsubtype_chario = 0x0300,
+	viomajorsubtype_config = 0x0400,
+	viomajorsubtype_cdio = 0x0500,
+	viomajorsubtype_tape = 0x0600,
+	viomajorsubtype_scsi = 0x0700
+};
+
+enum vioconfigsubtype {
+	vioconfigget = 0x0001,
+};
+
+enum viorc {
+	viorc_good = 0x0000,
+	viorc_noConnection = 0x0001,
+	viorc_noReceiver = 0x0002,
+	viorc_noBufferAvailable = 0x0003,
+	viorc_invalidMessageType = 0x0004,
+	viorc_invalidRange = 0x0201,
+	viorc_invalidToken = 0x0202,
+	viorc_DMAError = 0x0203,
+	viorc_useError = 0x0204,
+	viorc_releaseError = 0x0205,
+	viorc_invalidDisk = 0x0206,
+	viorc_openRejected = 0x0301
+};
+
+/*
+ * The structure of the events that flow between us and OS/400 for chario
+ * events.  You can't mess with this unless the OS/400 side changes too.
+ */
+struct viocharlpevent {
+	struct HvLpEvent event;
+	u32 reserved;
+	u16 version;
+	u16 subtype_result_code;
+	u8 virtual_device;
+	u8 len;
+	u8 data[VIOCHAR_MAX_DATA];
+};
+
+#define VIOCHAR_WINDOW		10
+
+enum viocharsubtype {
+	viocharopen = 0x0001,
+	viocharclose = 0x0002,
+	viochardata = 0x0003,
+	viocharack = 0x0004,
+	viocharconfig = 0x0005
+};
+
+enum viochar_rc {
+	viochar_rc_ebusy = 1
+};
+
+#endif /* _ASM_POWERPC_ISERIES_VIO_H */
diff --git a/arch/powerpc/include/asm/kdebug.h b/arch/powerpc/include/asm/kdebug.h
new file mode 100644
index 00000000000..ae6d206728a
--- /dev/null
+++ b/arch/powerpc/include/asm/kdebug.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_KDEBUG_H
+#define _ASM_POWERPC_KDEBUG_H
+#ifdef __KERNEL__
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_IABR_MATCH,
+	DIE_DABR_MATCH,
+	DIE_BPT,
+	DIE_SSTEP,
+};
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KDEBUG_H */
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
new file mode 100644
index 00000000000..f6c93c71689
--- /dev/null
+++ b/arch/powerpc/include/asm/kdump.h
@@ -0,0 +1,35 @@
+#ifndef _PPC64_KDUMP_H
+#define _PPC64_KDUMP_H
+
+/* Kdump kernel runs at 32 MB, change at your peril. */
+#define KDUMP_KERNELBASE	0x2000000
+
+/* How many bytes to reserve at zero for kdump. The reserve limit should
+ * be greater or equal to the trampoline's end address.
+ * Reserve to the end of the FWNMI area, see head_64.S */
+#define KDUMP_RESERVE_LIMIT	0x10000 /* 64K */
+
+#ifdef CONFIG_CRASH_DUMP
+
+#define KDUMP_TRAMPOLINE_START	0x0100
+#define KDUMP_TRAMPOLINE_END	0x3000
+
+#define KDUMP_MIN_TCE_ENTRIES	2048
+
+#endif /* CONFIG_CRASH_DUMP */
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_CRASH_DUMP
+
+extern void reserve_kdump_trampoline(void);
+extern void setup_kdump_trampoline(void);
+
+#else /* !CONFIG_CRASH_DUMP */
+
+static inline void reserve_kdump_trampoline(void) { ; }
+static inline void setup_kdump_trampoline(void) { ; }
+
+#endif /* CONFIG_CRASH_DUMP */
+#endif /* __ASSEMBLY__ */
+
+#endif /* __PPC64_KDUMP_H */
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
new file mode 100644
index 00000000000..3736d9b3328
--- /dev/null
+++ b/arch/powerpc/include/asm/kexec.h
@@ -0,0 +1,160 @@
+#ifndef _ASM_POWERPC_KEXEC_H
+#define _ASM_POWERPC_KEXEC_H
+#ifdef __KERNEL__
+
+/*
+ * Maximum page that is mapped directly into kernel memory.
+ * XXX: Since we copy virt we can use any page we allocate
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/*
+ * Maximum address we can reach in physical address mode.
+ * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR.
+ */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control code buffer */
+#ifdef __powerpc64__
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+#else
+/* TASK_SIZE, probably left over from use_mm ?? */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+#endif
+
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+/* The native architecture */
+#ifdef __powerpc64__
+#define KEXEC_ARCH KEXEC_ARCH_PPC64
+#else
+#define KEXEC_ARCH KEXEC_ARCH_PPC
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
+
+typedef void (*crash_shutdown_t)(void);
+
+#ifdef CONFIG_KEXEC
+
+#ifdef __powerpc64__
+/*
+ * This function is responsible for capturing register states if coming
+ * via panic or invoking dump using sysrq-trigger.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		/* FIXME Merge this with xmon_save_regs ?? */
+		unsigned long tmp1, tmp2;
+		__asm__ __volatile__ (
+			"std    0,0(%2)\n"
+			"std    1,8(%2)\n"
+			"std    2,16(%2)\n"
+			"std    3,24(%2)\n"
+			"std    4,32(%2)\n"
+			"std    5,40(%2)\n"
+			"std    6,48(%2)\n"
+			"std    7,56(%2)\n"
+			"std    8,64(%2)\n"
+			"std    9,72(%2)\n"
+			"std    10,80(%2)\n"
+			"std    11,88(%2)\n"
+			"std    12,96(%2)\n"
+			"std    13,104(%2)\n"
+			"std    14,112(%2)\n"
+			"std    15,120(%2)\n"
+			"std    16,128(%2)\n"
+			"std    17,136(%2)\n"
+			"std    18,144(%2)\n"
+			"std    19,152(%2)\n"
+			"std    20,160(%2)\n"
+			"std    21,168(%2)\n"
+			"std    22,176(%2)\n"
+			"std    23,184(%2)\n"
+			"std    24,192(%2)\n"
+			"std    25,200(%2)\n"
+			"std    26,208(%2)\n"
+			"std    27,216(%2)\n"
+			"std    28,224(%2)\n"
+			"std    29,232(%2)\n"
+			"std    30,240(%2)\n"
+			"std    31,248(%2)\n"
+			"mfmsr  %0\n"
+			"std    %0, 264(%2)\n"
+			"mfctr  %0\n"
+			"std    %0, 280(%2)\n"
+			"mflr   %0\n"
+			"std    %0, 288(%2)\n"
+			"bl     1f\n"
+		"1:     mflr   %1\n"
+			"std    %1, 256(%2)\n"
+			"mtlr   %0\n"
+			"mfxer  %0\n"
+			"std    %0, 296(%2)\n"
+			: "=&r" (tmp1), "=&r" (tmp2)
+			: "b" (newregs)
+			: "memory");
+	}
+}
+#else
+/*
+ * Provide a dummy definition to avoid build failures. Will remain
+ * empty till crash dump support is enabled.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs) { }
+#endif /* !__powerpc64 __ */
+
+extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
+					  master to copy new code to 0 */
+extern int crashing_cpu;
+extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
+extern cpumask_t cpus_in_sr;
+static inline int kexec_sr_activated(int cpu)
+{
+	return cpu_isset(cpu,cpus_in_sr);
+}
+
+struct kimage;
+struct pt_regs;
+extern void default_machine_kexec(struct kimage *image);
+extern int default_machine_kexec_prepare(struct kimage *image);
+extern void default_machine_crash_shutdown(struct pt_regs *regs);
+extern int crash_shutdown_register(crash_shutdown_t handler);
+extern int crash_shutdown_unregister(crash_shutdown_t handler);
+
+extern void machine_kexec_simple(struct kimage *image);
+extern void crash_kexec_secondary(struct pt_regs *regs);
+extern int overlaps_crashkernel(unsigned long start, unsigned long size);
+extern void reserve_crashkernel(void);
+
+#else /* !CONFIG_KEXEC */
+static inline int kexec_sr_activated(int cpu) { return 0; }
+static inline void crash_kexec_secondary(struct pt_regs *regs) { }
+
+static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+	return 0;
+}
+
+static inline void reserve_crashkernel(void) { ; }
+
+static inline int crash_shutdown_register(crash_shutdown_t handler)
+{
+	return 0;
+}
+
+static inline int crash_shutdown_unregister(crash_shutdown_t handler)
+{
+	return 0;
+}
+
+#endif /* CONFIG_KEXEC */
+#endif /* ! __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h
new file mode 100644
index 00000000000..d8520ef121f
--- /dev/null
+++ b/arch/powerpc/include/asm/keylargo.h
@@ -0,0 +1,261 @@
+#ifndef _ASM_POWERPC_KEYLARGO_H
+#define _ASM_POWERPC_KEYLARGO_H
+#ifdef __KERNEL__
+/*
+ * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
+ *
+ */
+
+/* "Pangea" chipset has keylargo device-id 0x25 while core99
+ * has device-id 0x22. The rev. of the pangea one is 0, so we
+ * fake an artificial rev. in keylargo_rev by oring 0x100
+ */
+#define KL_PANGEA_REV		0x100
+
+/* offset from base for feature control registers */
+#define KEYLARGO_MBCR		0x34	/* KL Only, Media bay control/status */
+#define KEYLARGO_FCR0		0x38
+#define KEYLARGO_FCR1		0x3c
+#define KEYLARGO_FCR2		0x40
+#define KEYLARGO_FCR3		0x44
+#define KEYLARGO_FCR4		0x48
+#define KEYLARGO_FCR5		0x4c	/* Pangea only */
+
+/* K2 aditional FCRs */
+#define K2_FCR6			0x34
+#define K2_FCR7			0x30
+#define K2_FCR8			0x2c
+#define K2_FCR9			0x28
+#define K2_FCR10		0x24
+
+/* GPIO registers */
+#define KEYLARGO_GPIO_LEVELS0		0x50
+#define KEYLARGO_GPIO_LEVELS1		0x54
+#define KEYLARGO_GPIO_EXTINT_0		0x58
+#define KEYLARGO_GPIO_EXTINT_CNT	18
+#define KEYLARGO_GPIO_0			0x6A
+#define KEYLARGO_GPIO_CNT		17
+#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE	0x80
+#define KEYLARGO_GPIO_OUTPUT_ENABLE	0x04
+#define KEYLARGO_GPIO_OUTOUT_DATA	0x01
+#define KEYLARGO_GPIO_INPUT_DATA	0x02
+
+/* K2 does only extint GPIOs and does 51 of them */
+#define K2_GPIO_EXTINT_0		0x58
+#define K2_GPIO_EXTINT_CNT		51
+
+/* Specific GPIO regs */
+
+#define KL_GPIO_MODEM_RESET		(KEYLARGO_GPIO_0+0x03)
+#define KL_GPIO_MODEM_POWER		(KEYLARGO_GPIO_0+0x02) /* Pangea */
+
+#define KL_GPIO_SOUND_POWER		(KEYLARGO_GPIO_0+0x05)
+
+/* Hrm... this one is only to be used on Pismo. It seeem to also
+ * control the timebase enable on other machines. Still to be
+ * experimented... --BenH.
+ */
+#define KL_GPIO_FW_CABLE_POWER		(KEYLARGO_GPIO_0+0x09)
+#define KL_GPIO_TB_ENABLE		(KEYLARGO_GPIO_0+0x09)
+
+#define KL_GPIO_ETH_PHY_RESET		(KEYLARGO_GPIO_0+0x10)
+
+#define KL_GPIO_EXTINT_CPU1		(KEYLARGO_GPIO_0+0x0a)
+#define KL_GPIO_EXTINT_CPU1_ASSERT	0x04
+#define KL_GPIO_EXTINT_CPU1_RELEASE	0x38
+
+#define KL_GPIO_RESET_CPU0		(KEYLARGO_GPIO_EXTINT_0+0x03)
+#define KL_GPIO_RESET_CPU1		(KEYLARGO_GPIO_EXTINT_0+0x04)
+#define KL_GPIO_RESET_CPU2		(KEYLARGO_GPIO_EXTINT_0+0x0f)
+#define KL_GPIO_RESET_CPU3		(KEYLARGO_GPIO_EXTINT_0+0x10)
+
+#define KL_GPIO_PMU_MESSAGE_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x09)
+#define KL_GPIO_PMU_MESSAGE_BIT		KEYLARGO_GPIO_INPUT_DATA
+
+#define KL_GPIO_MEDIABAY_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x0e)
+
+#define KL_GPIO_AIRPORT_0		(KEYLARGO_GPIO_EXTINT_0+0x0a)
+#define KL_GPIO_AIRPORT_1		(KEYLARGO_GPIO_EXTINT_0+0x0d)
+#define KL_GPIO_AIRPORT_2		(KEYLARGO_GPIO_0+0x0d)
+#define KL_GPIO_AIRPORT_3		(KEYLARGO_GPIO_0+0x0e)
+#define KL_GPIO_AIRPORT_4		(KEYLARGO_GPIO_0+0x0f)
+
+/*
+ * Bits in feature control register. Those bits different for K2 are
+ * listed separately
+ */
+#define KL_MBCR_MB0_PCI_ENABLE		0x00000800	/* exist ? */
+#define KL_MBCR_MB0_IDE_ENABLE		0x00001000
+#define KL_MBCR_MB0_FLOPPY_ENABLE	0x00002000	/* exist ? */
+#define KL_MBCR_MB0_SOUND_ENABLE	0x00004000	/* hrm... */
+#define KL_MBCR_MB0_DEV_MASK		0x00007800
+#define KL_MBCR_MB0_DEV_POWER		0x00000400
+#define KL_MBCR_MB0_DEV_RESET		0x00000200
+#define KL_MBCR_MB0_ENABLE		0x00000100
+#define KL_MBCR_MB1_PCI_ENABLE		0x08000000	/* exist ? */
+#define KL_MBCR_MB1_IDE_ENABLE		0x10000000
+#define KL_MBCR_MB1_FLOPPY_ENABLE	0x20000000	/* exist ? */
+#define KL_MBCR_MB1_SOUND_ENABLE	0x40000000	/* hrm... */
+#define KL_MBCR_MB1_DEV_MASK		0x78000000
+#define KL_MBCR_MB1_DEV_POWER		0x04000000
+#define KL_MBCR_MB1_DEV_RESET		0x02000000
+#define KL_MBCR_MB1_ENABLE		0x01000000
+
+#define KL0_SCC_B_INTF_ENABLE		0x00000001	/* (KL Only) */
+#define KL0_SCC_A_INTF_ENABLE		0x00000002
+#define KL0_SCC_SLOWPCLK		0x00000004
+#define KL0_SCC_RESET			0x00000008
+#define KL0_SCCA_ENABLE			0x00000010
+#define KL0_SCCB_ENABLE			0x00000020
+#define KL0_SCC_CELL_ENABLE		0x00000040
+#define KL0_IRDA_HIGH_BAND		0x00000100	/* (KL Only) */
+#define KL0_IRDA_SOURCE2_SEL		0x00000200	/* (KL Only) */
+#define KL0_IRDA_SOURCE1_SEL		0x00000400	/* (KL Only) */
+#define KL0_PG_USB0_PMI_ENABLE		0x00000400	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_RESET			0x00000800	/* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND_SEL	0x00000800	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT1		0x00001000	/* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND		0x00001000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT0		0x00002000	/* (KL Only) */
+#define KL0_PG_USB0_PAD_SUSPEND		0x00002000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_FAST_CONNECT		0x00004000	/* (KL Only) */
+#define KL0_PG_USB1_PMI_ENABLE		0x00004000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_ENABLE			0x00008000	/* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND_SEL	0x00008000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK32_ENABLE		0x00010000	/* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND		0x00010000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK19_ENABLE		0x00020000	/* (KL Only) */
+#define KL0_PG_USB1_PAD_SUSPEND		0x00020000	/* (Pangea/Intrepid Only) */
+#define KL0_USB0_PAD_SUSPEND0		0x00040000
+#define KL0_USB0_PAD_SUSPEND1		0x00080000
+#define KL0_USB0_CELL_ENABLE		0x00100000
+#define KL0_USB1_PAD_SUSPEND0		0x00400000
+#define KL0_USB1_PAD_SUSPEND1		0x00800000
+#define KL0_USB1_CELL_ENABLE		0x01000000
+#define KL0_USB_REF_SUSPEND		0x10000000	/* (KL Only) */
+
+#define KL0_SERIAL_ENABLE		(KL0_SCC_B_INTF_ENABLE | \
+					KL0_SCC_SLOWPCLK | \
+					KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
+
+#define KL1_USB2_PMI_ENABLE		0x00000001	/* Intrepid only */
+#define KL1_AUDIO_SEL_22MCLK		0x00000002	/* KL/Pangea only */
+#define KL1_USB2_REF_SUSPEND_SEL	0x00000002	/* Intrepid only */
+#define KL1_USB2_REF_SUSPEND		0x00000004	/* Intrepid only */
+#define KL1_AUDIO_CLK_ENABLE_BIT	0x00000008	/* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND_SEL	0x00000008	/* Intrepid only */
+#define KL1_USB2_PAD_SUSPEND0		0x00000010	/* Intrepid only */
+#define KL1_AUDIO_CLK_OUT_ENABLE	0x00000020	/* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND1		0x00000020	/* Intrepid only */
+#define KL1_AUDIO_CELL_ENABLE		0x00000040	/* KL/Pangea only */
+#define KL1_USB2_CELL_ENABLE		0x00000040	/* Intrepid only */
+#define KL1_AUDIO_CHOOSE		0x00000080	/* KL/Pangea only */
+#define KL1_I2S0_CHOOSE			0x00000200	/* KL Only */
+#define KL1_I2S0_CELL_ENABLE		0x00000400
+#define KL1_I2S0_CLK_ENABLE_BIT		0x00001000
+#define KL1_I2S0_ENABLE			0x00002000
+#define KL1_I2S1_CELL_ENABLE		0x00020000
+#define KL1_I2S1_CLK_ENABLE_BIT		0x00080000
+#define KL1_I2S1_ENABLE			0x00100000
+#define KL1_EIDE0_ENABLE		0x00800000	/* KL/Intrepid Only */
+#define KL1_EIDE0_RESET_N		0x01000000	/* KL/Intrepid Only */
+#define KL1_EIDE1_ENABLE		0x04000000	/* KL Only */
+#define KL1_EIDE1_RESET_N		0x08000000	/* KL Only */
+#define KL1_UIDE_ENABLE			0x20000000	/* KL/Pangea Only */
+#define KL1_UIDE_RESET_N		0x40000000	/* KL/Pangea Only */
+
+#define KL2_IOBUS_ENABLE		0x00000002
+#define KL2_SLEEP_STATE_BIT		0x00000100	/* KL Only */
+#define KL2_PG_STOP_ALL_CLOCKS		0x00000100	/* Pangea Only */
+#define KL2_MPIC_ENABLE			0x00020000
+#define KL2_CARDSLOT_RESET		0x00040000	/* Pangea/Intrepid Only */
+#define KL2_ALT_DATA_OUT		0x02000000	/* KL Only ??? */
+#define KL2_MEM_IS_BIG			0x04000000
+#define KL2_CARDSEL_16			0x08000000
+
+#define KL3_SHUTDOWN_PLL_TOTAL		0x00000001	/* KL/Pangea only */
+#define KL3_SHUTDOWN_PLLKW6		0x00000002	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL3		0x00000002	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW4		0x00000004	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL2		0x00000004	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW35		0x00000008	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL1		0x00000008	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW12		0x00000010	/* KL Only */
+#define KL3_IT_ENABLE_PLL3_SHUTDOWN	0x00000010	/* Intrepid only */
+#define KL3_PLL_RESET			0x00000020	/* KL/Pangea only */
+#define KL3_IT_ENABLE_PLL2_SHUTDOWN	0x00000020	/* Intrepid only */
+#define KL3_IT_ENABLE_PLL1_SHUTDOWN	0x00000010	/* Intrepid only */
+#define KL3_SHUTDOWN_PLL2X		0x00000080	/* KL Only */
+#define KL3_CLK66_ENABLE		0x00000100	/* KL Only */
+#define KL3_CLK49_ENABLE		0x00000200
+#define KL3_CLK45_ENABLE		0x00000400
+#define KL3_CLK31_ENABLE		0x00000800	/* KL/Pangea only */
+#define KL3_TIMER_CLK18_ENABLE		0x00001000
+#define KL3_I2S1_CLK18_ENABLE		0x00002000
+#define KL3_I2S0_CLK18_ENABLE		0x00004000
+#define KL3_VIA_CLK16_ENABLE		0x00008000	/* KL/Pangea only */
+#define KL3_IT_VIA_CLK32_ENABLE		0x00008000	/* Intrepid only */
+#define KL3_STOPPING33_ENABLED		0x00080000	/* KL Only */
+#define KL3_PG_PLL_ENABLE_TEST		0x00080000	/* Pangea Only */
+
+/* Intrepid USB bus 2, port 0,1 */
+#define KL3_IT_PORT_WAKEUP_ENABLE(p)		(0x00080000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_WAKE_EN(p)		(0x00040000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_WAKE_EN(p)		(0x00020000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p)	(0x00010000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_STAT(p)		(0x00300000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_STAT(p)		(0x00200000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_STAT(p)		(0x00100000 << ((p)<<3))
+
+/* Port 0,1 : bus 0, port 2,3 : bus 1 */
+#define KL4_PORT_WAKEUP_ENABLE(p)	(0x00000008 << ((p)<<3))
+#define KL4_PORT_RESUME_WAKE_EN(p)	(0x00000004 << ((p)<<3))
+#define KL4_PORT_CONNECT_WAKE_EN(p)	(0x00000002 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_WAKE_EN(p)	(0x00000001 << ((p)<<3))
+#define KL4_PORT_RESUME_STAT(p)		(0x00000040 << ((p)<<3))
+#define KL4_PORT_CONNECT_STAT(p)	(0x00000020 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_STAT(p)	(0x00000010 << ((p)<<3))
+
+/* Pangea and Intrepid only */
+#define KL5_VIA_USE_CLK31		0000000001	/* Pangea Only */
+#define KL5_SCC_USE_CLK31		0x00000002	/* Pangea Only */
+#define KL5_PWM_CLK32_EN		0x00000004
+#define KL5_CLK3_68_EN			0x00000010
+#define KL5_CLK32_EN			0x00000020
+
+
+/* K2 definitions */
+#define K2_FCR0_USB0_SWRESET		0x00200000
+#define K2_FCR0_USB1_SWRESET		0x02000000
+#define K2_FCR0_RING_PME_DISABLE	0x08000000
+
+#define K2_FCR1_PCI1_BUS_RESET_N	0x00000010
+#define K2_FCR1_PCI1_SLEEP_RESET_EN	0x00000020
+#define K2_FCR1_I2S0_CELL_ENABLE	0x00000400
+#define K2_FCR1_I2S0_RESET		0x00000800
+#define K2_FCR1_I2S0_CLK_ENABLE_BIT	0x00001000
+#define K2_FCR1_I2S0_ENABLE    		0x00002000
+#define K2_FCR1_PCI1_CLK_ENABLE		0x00004000
+#define K2_FCR1_FW_CLK_ENABLE		0x00008000
+#define K2_FCR1_FW_RESET_N		0x00010000
+#define K2_FCR1_I2S1_CELL_ENABLE	0x00020000
+#define K2_FCR1_I2S1_CLK_ENABLE_BIT	0x00080000
+#define K2_FCR1_I2S1_ENABLE		0x00100000
+#define K2_FCR1_GMAC_CLK_ENABLE		0x00400000
+#define K2_FCR1_GMAC_POWER_DOWN		0x00800000
+#define K2_FCR1_GMAC_RESET_N		0x01000000
+#define K2_FCR1_SATA_CLK_ENABLE		0x02000000
+#define K2_FCR1_SATA_POWER_DOWN		0x04000000
+#define K2_FCR1_SATA_RESET_N		0x08000000
+#define K2_FCR1_UATA_CLK_ENABLE		0x10000000
+#define K2_FCR1_UATA_RESET_N		0x40000000
+#define K2_FCR1_UATA_CHOOSE_CLK66	0x80000000
+
+/* Shasta definitions */
+#define SH_FCR1_I2S2_CELL_ENABLE	0x00000010
+#define SH_FCR1_I2S2_CLK_ENABLE_BIT	0x00000040
+#define SH_FCR1_I2S2_ENABLE		0x00000080
+#define SH_FCR3_I2S2_CLK18_ENABLE	0x00008000
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KEYLARGO_H */
diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h
new file mode 100644
index 00000000000..edd217006d2
--- /dev/null
+++ b/arch/powerpc/include/asm/kgdb.h
@@ -0,0 +1,63 @@
+/*
+ * The PowerPC (32/64) specific defines / externs for KGDB.  Based on
+ * the previous 32bit and 64bit specific files, which had the following
+ * copyrights:
+ *
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC Mods (C) 2004 Tom Rini (trini@mvista.com)
+ * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com)
+ * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
+ *
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Author: Tom Rini <trini@kernel.crashing.org>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifdef __KERNEL__
+#ifndef __POWERPC_KGDB_H__
+#define __POWERPC_KGDB_H__
+
+#ifndef __ASSEMBLY__
+
+#define BREAK_INSTR_SIZE	4
+#define BUFMAX			((NUMREGBYTES * 2) + 512)
+#define OUTBUFMAX		((NUMREGBYTES * 2) + 512)
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".long 0x7d821008"); /* twge r2, r2 */
+}
+#define CACHE_FLUSH_IS_SAFE	1
+
+/* The number bytes of registers we have to save depends on a few
+ * things.  For 64bit we default to not including vector registers and
+ * vector state registers. */
+#ifdef CONFIG_PPC64
+/*
+ * 64 bit (8 byte) registers:
+ *   32 gpr, 32 fpr, nip, msr, link, ctr
+ * 32 bit (4 byte) registers:
+ *   ccr, xer, fpscr
+ */
+#define NUMREGBYTES		((68 * 8) + (3 * 4))
+#define NUMCRITREGBYTES		184
+#else /* CONFIG_PPC32 */
+/* On non-E500 family PPC32 we determine the size by picking the last
+ * register we need, but on E500 we skip sections so we list what we
+ * need to store, and add it up. */
+#ifndef CONFIG_E500
+#define MAXREG			(PT_FPSCR+1)
+#else
+/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
+#define MAXREG                 ((32*2)+6+2+1)
+#endif
+#define NUMREGBYTES		(MAXREG * sizeof(int))
+/* CR/LR, R1, R2, R13-R31 inclusive. */
+#define NUMCRITREGBYTES		(23 * sizeof(int))
+#endif /* 32/64 */
+#endif /* !(__ASSEMBLY__) */
+#endif /* !__POWERPC_KGDB_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h
new file mode 100644
index 00000000000..b6bac6f61c1
--- /dev/null
+++ b/arch/powerpc/include/asm/kmap_types.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_POWERPC_KMAP_TYPES_H
+#define _ASM_POWERPC_KMAP_TYPES_H
+
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_PPC_SYNC_PAGE,
+	KM_PPC_SYNC_ICACHE,
+	KM_TYPE_NR
+};
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_KMAP_TYPES_H */
diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
new file mode 100644
index 00000000000..d0e7701fa1f
--- /dev/null
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_POWERPC_KPROBES_H
+#define _ASM_POWERPC_KPROBES_H
+#ifdef __KERNEL__
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ * 2004-Nov	Modified for PPC64 by Ananth N Mavinakayanahalli
+ *		<ananth@in.ibm.com>
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define  __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct pt_regs;
+struct kprobe;
+
+typedef unsigned int kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0x7fe00008	/* trap */
+#define MAX_INSN_SIZE 1
+
+#define IS_TW(instr)		(((instr) & 0xfc0007fe) == 0x7c000008)
+#define IS_TD(instr)		(((instr) & 0xfc0007fe) == 0x7c000088)
+#define IS_TDI(instr)		(((instr) & 0xfc000000) == 0x08000000)
+#define IS_TWI(instr)		(((instr) & 0xfc000000) == 0x0c000000)
+
+#ifdef CONFIG_PPC64
+/*
+ * 64bit powerpc uses function descriptors.
+ * Handle cases where:
+ * 		- User passes a <.symbol> or <module:.symbol>
+ * 		- User passes a <symbol> or <module:symbol>
+ * 		- User passes a non-existant symbol, kallsyms_lookup_name
+ * 		  returns 0. Don't deref the NULL pointer in that case
+ */
+#define kprobe_lookup_name(name, addr)					\
+{									\
+	addr = (kprobe_opcode_t *)kallsyms_lookup_name(name);		\
+	if (addr) {							\
+		char *colon;						\
+		if ((colon = strchr(name, ':')) != NULL) {		\
+			colon++;					\
+			if (*colon != '\0' && *colon != '.')		\
+				addr = *(kprobe_opcode_t **)addr;	\
+		} else if (name[0] != '.')				\
+			addr = *(kprobe_opcode_t **)addr;		\
+	} else {							\
+		char dot_name[KSYM_NAME_LEN];				\
+		dot_name[0] = '.';					\
+		dot_name[1] = '\0';					\
+		strncat(dot_name, name, KSYM_NAME_LEN - 2);		\
+		addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \
+	}								\
+}
+
+#define is_trap(instr)	(IS_TW(instr) || IS_TD(instr) || \
+			IS_TWI(instr) || IS_TDI(instr))
+#else
+/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */
+#define is_trap(instr)	(IS_TW(instr) || IS_TWI(instr))
+#endif
+
+#define flush_insn_slot(p)	do { } while (0)
+#define kretprobe_blacklist_size 0
+
+void kretprobe_trampoline(void);
+extern void arch_remove_kprobe(struct kprobe *p);
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	/* copy of original instruction */
+	kprobe_opcode_t *insn;
+	/*
+	 * Set in kprobes code, initially to 0. If the instruction can be
+	 * eumulated, this is set to 1, if not, to -1.
+	 */
+	int boostable;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long saved_msr;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_saved_msr;
+	struct pt_regs jprobe_saved_regs;
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+					unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_KPROBES_H */
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
new file mode 100644
index 00000000000..f993e4198d5
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm.h
@@ -0,0 +1,55 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+#include <asm/types.h>
+
+struct kvm_regs {
+	__u64 pc;
+	__u64 cr;
+	__u64 ctr;
+	__u64 lr;
+	__u64 xer;
+	__u64 msr;
+	__u64 srr0;
+	__u64 srr1;
+	__u64 pid;
+
+	__u64 sprg0;
+	__u64 sprg1;
+	__u64 sprg2;
+	__u64 sprg3;
+	__u64 sprg4;
+	__u64 sprg5;
+	__u64 sprg6;
+	__u64 sprg7;
+
+	__u64 gpr[32];
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+	__u64 fpr[32];
+};
+
+#endif /* __LINUX_KVM_POWERPC_H */
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
new file mode 100644
index 00000000000..2197764796d
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -0,0 +1,55 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_ASM_H__
+#define __POWERPC_KVM_ASM_H__
+
+/* IVPR must be 64KiB-aligned. */
+#define VCPU_SIZE_ORDER 4
+#define VCPU_SIZE_LOG   (VCPU_SIZE_ORDER + 12)
+#define VCPU_TLB_PGSZ   PPC44x_TLB_64K
+#define VCPU_SIZE_BYTES (1<<VCPU_SIZE_LOG)
+
+#define BOOKE_INTERRUPT_CRITICAL 0
+#define BOOKE_INTERRUPT_MACHINE_CHECK 1
+#define BOOKE_INTERRUPT_DATA_STORAGE 2
+#define BOOKE_INTERRUPT_INST_STORAGE 3
+#define BOOKE_INTERRUPT_EXTERNAL 4
+#define BOOKE_INTERRUPT_ALIGNMENT 5
+#define BOOKE_INTERRUPT_PROGRAM 6
+#define BOOKE_INTERRUPT_FP_UNAVAIL 7
+#define BOOKE_INTERRUPT_SYSCALL 8
+#define BOOKE_INTERRUPT_AP_UNAVAIL 9
+#define BOOKE_INTERRUPT_DECREMENTER 10
+#define BOOKE_INTERRUPT_FIT 11
+#define BOOKE_INTERRUPT_WATCHDOG 12
+#define BOOKE_INTERRUPT_DTLB_MISS 13
+#define BOOKE_INTERRUPT_ITLB_MISS 14
+#define BOOKE_INTERRUPT_DEBUG 15
+#define BOOKE_MAX_INTERRUPT 15
+
+#define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
+#define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
+
+#define RESUME_GUEST            0
+#define RESUME_GUEST_NV         RESUME_FLAG_NV
+#define RESUME_HOST             RESUME_FLAG_HOST
+#define RESUME_HOST_NV          (RESUME_FLAG_HOST|RESUME_FLAG_NV)
+
+#endif /* __POWERPC_KVM_ASM_H__ */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
new file mode 100644
index 00000000000..2655e2a4831
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -0,0 +1,155 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_HOST_H__
+#define __POWERPC_KVM_HOST_H__
+
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/kvm_types.h>
+#include <asm/kvm_asm.h>
+
+#define KVM_MAX_VCPUS 1
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
+/* We don't currently support large pages. */
+#define KVM_PAGES_PER_HPAGE (1<<31)
+
+struct kvm;
+struct kvm_run;
+struct kvm_vcpu;
+
+struct kvm_vm_stat {
+	u32 remote_tlb_flush;
+};
+
+struct kvm_vcpu_stat {
+	u32 sum_exits;
+	u32 mmio_exits;
+	u32 dcr_exits;
+	u32 signal_exits;
+	u32 light_exits;
+	/* Account for special types of light exits: */
+	u32 itlb_real_miss_exits;
+	u32 itlb_virt_miss_exits;
+	u32 dtlb_real_miss_exits;
+	u32 dtlb_virt_miss_exits;
+	u32 syscall_exits;
+	u32 isi_exits;
+	u32 dsi_exits;
+	u32 emulated_inst_exits;
+	u32 dec_exits;
+	u32 ext_intr_exits;
+	u32 halt_wakeup;
+};
+
+struct tlbe {
+	u32 tid; /* Only the low 8 bits are used. */
+	u32 word0;
+	u32 word1;
+	u32 word2;
+};
+
+struct kvm_arch {
+};
+
+struct kvm_vcpu_arch {
+	/* Unmodified copy of the guest's TLB. */
+	struct tlbe guest_tlb[PPC44x_TLB_SIZE];
+	/* TLB that's actually used when the guest is running. */
+	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
+	/* Pages which are referenced in the shadow TLB. */
+	struct page *shadow_pages[PPC44x_TLB_SIZE];
+	/* Copy of the host's TLB. */
+	struct tlbe host_tlb[PPC44x_TLB_SIZE];
+
+	u32 host_stack;
+	u32 host_pid;
+
+	u64 fpr[32];
+	u32 gpr[32];
+
+	u32 pc;
+	u32 cr;
+	u32 ctr;
+	u32 lr;
+	u32 xer;
+
+	u32 msr;
+	u32 mmucr;
+	u32 sprg0;
+	u32 sprg1;
+	u32 sprg2;
+	u32 sprg3;
+	u32 sprg4;
+	u32 sprg5;
+	u32 sprg6;
+	u32 sprg7;
+	u32 srr0;
+	u32 srr1;
+	u32 csrr0;
+	u32 csrr1;
+	u32 dsrr0;
+	u32 dsrr1;
+	u32 dear;
+	u32 esr;
+	u32 dec;
+	u32 decar;
+	u32 tbl;
+	u32 tbu;
+	u32 tcr;
+	u32 tsr;
+	u32 ivor[16];
+	u32 ivpr;
+	u32 pir;
+	u32 pid;
+	u32 pvr;
+	u32 ccr0;
+	u32 ccr1;
+	u32 dbcr0;
+	u32 dbcr1;
+
+	u32 last_inst;
+	u32 fault_dear;
+	u32 fault_esr;
+	gpa_t paddr_accessed;
+
+	u8 io_gpr; /* GPR used as IO source/target */
+	u8 mmio_is_bigendian;
+	u8 dcr_needed;
+	u8 dcr_is_write;
+
+	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
+
+	struct timer_list dec_timer;
+	unsigned long pending_exceptions;
+};
+
+struct kvm_guest_debug {
+	int enabled;
+	unsigned long bp[4];
+	int singlestep;
+};
+
+#endif /* __POWERPC_KVM_HOST_H__ */
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
new file mode 100644
index 00000000000..2d48f6a63d0
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -0,0 +1,37 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_PARA_H__
+#define __POWERPC_KVM_PARA_H__
+
+#ifdef __KERNEL__
+
+static inline int kvm_para_available(void)
+{
+	return 0;
+}
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __POWERPC_KVM_PARA_H__ */
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
new file mode 100644
index 00000000000..a8b06879226
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -0,0 +1,95 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_PPC_H__
+#define __POWERPC_KVM_PPC_H__
+
+/* This file exists just so we can dereference kvm_vcpu, avoiding nested header
+ * dependencies. */
+
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/kvm_types.h>
+#include <linux/kvm_host.h>
+
+struct kvm_tlb {
+	struct tlbe guest_tlb[PPC44x_TLB_SIZE];
+	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
+};
+
+enum emulation_result {
+	EMULATE_DONE,         /* no further processing */
+	EMULATE_DO_MMIO,      /* kvm_run filled with MMIO request */
+	EMULATE_DO_DCR,       /* kvm_run filled with DCR request */
+	EMULATE_FAIL,         /* can't emulate this instruction */
+};
+
+extern const unsigned char exception_priority[];
+extern const unsigned char priority_exception[];
+
+extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
+extern char kvmppc_handlers_start[];
+extern unsigned long kvmppc_handler_len;
+
+extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
+extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                              unsigned int rt, unsigned int bytes,
+                              int is_bigendian);
+extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                               u32 val, unsigned int bytes, int is_bigendian);
+
+extern int kvmppc_emulate_instruction(struct kvm_run *run,
+                                      struct kvm_vcpu *vcpu);
+extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
+
+extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
+                           u64 asid, u32 flags);
+extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                                  gva_t eend, u32 asid);
+extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
+
+extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu);
+
+static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception)
+{
+	unsigned int priority = exception_priority[exception];
+	set_bit(priority, &vcpu->arch.pending_exceptions);
+}
+
+static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception)
+{
+	unsigned int priority = exception_priority[exception];
+	clear_bit(priority, &vcpu->arch.pending_exceptions);
+}
+
+/* Helper function for "full" MSR writes. No need to call this if only EE is
+ * changing. */
+static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
+{
+	if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR))
+		kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR);
+
+	vcpu->arch.msr = new_msr;
+
+	if (vcpu->arch.msr & MSR_WE)
+		kvm_vcpu_block(vcpu);
+}
+
+#endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/arch/powerpc/include/asm/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h
new file mode 100644
index 00000000000..4d8518049f4
--- /dev/null
+++ b/arch/powerpc/include/asm/libata-portmap.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
+#define __ASM_POWERPC_LIBATA_PORTMAP_H
+
+#define ATA_PRIMARY_CMD	0x1F0
+#define ATA_PRIMARY_CTL	0x3F6
+#define ATA_PRIMARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 0)
+
+#define ATA_SECONDARY_CMD	0x170
+#define ATA_SECONDARY_CTL	0x376
+#define ATA_SECONDARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 1)
+
+#endif
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
new file mode 100644
index 00000000000..e1c4ac1cc4b
--- /dev/null
+++ b/arch/powerpc/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_LINKAGE_H
+#define _ASM_POWERPC_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif	/* _ASM_POWERPC_LINKAGE_H */
diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h
new file mode 100644
index 00000000000..6f5fdf0a19a
--- /dev/null
+++ b/arch/powerpc/include/asm/lmb.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_LMB_H
+#define _ASM_POWERPC_LMB_H
+
+#include <asm/udbg.h>
+
+#define LMB_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define LMB_REAL_LIMIT	lowmem_end_addr
+#else
+#define LMB_REAL_LIMIT	0
+#endif
+
+#endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h
new file mode 100644
index 00000000000..612d8327665
--- /dev/null
+++ b/arch/powerpc/include/asm/local.h
@@ -0,0 +1,200 @@
+#ifndef _ARCH_POWERPC_LOCAL_H
+#define _ARCH_POWERPC_LOCAL_H
+
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+typedef struct
+{
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l,i)	atomic_long_set(&(l)->a, (i))
+
+#define local_add(i,l)	atomic_long_add((i),(&(l)->a))
+#define local_sub(i,l)	atomic_long_sub((i),(&(l)->a))
+#define local_inc(l)	atomic_long_inc(&(l)->a)
+#define local_dec(l)	atomic_long_dec(&(l)->a)
+
+static __inline__ long local_add_return(long a, local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%2		# local_add_return\n\
+	add	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (a), "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+#define local_add_negative(a, l)	(local_add_return((a), (l)) < 0)
+
+static __inline__ long local_sub_return(long a, local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%2		# local_sub_return\n\
+	subf	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (a), "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ long local_inc_return(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_inc_return\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * local_inc_and_test - increment and test
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_inc_and_test(l) (local_inc_return(l) == 0)
+
+static __inline__ long local_dec_return(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_dec_return\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1\n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+#define local_cmpxchg(l, o, n) \
+	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+static __inline__ int local_add_unless(local_t *l, long a, long u)
+{
+	long t;
+
+	__asm__ __volatile__ (
+"1:"	PPC_LLARX	"%0,0,%1		# local_add_unless\n\
+	cmpw	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%1 \n\
+	bne-	1b \n"
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&(l->a.counter)), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+#define local_sub_and_test(a, l)	(local_sub_return((a), (l)) == 0)
+#define local_dec_and_test(l)		(local_dec_return((l)) == 0)
+
+/*
+ * Atomically test *l and decrement if it is greater than 0.
+ * The function returns the old value of *l minus 1.
+ */
+static __inline__ long local_dec_if_positive(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_dec_if_positive\n\
+	cmpwi	%0,1\n\
+	addi	%0,%0,-1\n\
+	blt-	2f\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1\n\
+	bne-	1b"
+	"\n\
+2:"	: "=&b" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+
+#define __local_inc(l)		((l)->a.counter++)
+#define __local_dec(l)		((l)->a.counter++)
+#define __local_add(i,l)	((l)->a.counter+=(i))
+#define __local_sub(i,l)	((l)->a.counter-=(i))
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+   still access a variable of a previous CPU in a non atomic way. */
+#define cpu_local_wrap_v(l)	 	\
+	({ local_t res__;		\
+	   preempt_disable(); 		\
+	   res__ = (l);			\
+	   preempt_enable();		\
+	   res__; })
+#define cpu_local_wrap(l)		\
+	({ preempt_disable();		\
+	   l;				\
+	   preempt_enable(); })		\
+
+#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
+#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
+#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
+#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
+#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
+#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
+
+#define __cpu_local_inc(l)	cpu_local_inc(l)
+#define __cpu_local_dec(l)	cpu_local_dec(l)
+#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
+
+#endif /* _ARCH_POWERPC_LOCAL_H */
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
new file mode 100644
index 00000000000..2fe268b1033
--- /dev/null
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -0,0 +1,159 @@
+/*
+ * lppaca.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_LPPACA_H
+#define _ASM_POWERPC_LPPACA_H
+#ifdef __KERNEL__
+
+//=============================================================================
+//
+//	This control block contains the data that is shared between the
+//	hypervisor (PLIC) and the OS.
+//
+//
+//----------------------------------------------------------------------------
+#include <linux/cache.h>
+#include <asm/types.h>
+#include <asm/mmu.h>
+
+/* The Hypervisor barfs if the lppaca crosses a page boundary.  A 1k
+ * alignment is sufficient to prevent this */
+struct lppaca {
+//=============================================================================
+// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
+// NOTE: The xDynXyz fields are fields that will be dynamically changed by
+// PLIC when preparing to bring a processor online or when dispatching a
+// virtual processor!
+//=============================================================================
+	u32	desc;			// Eye catcher 0xD397D781	x00-x03
+	u16	size;			// Size of this struct		x04-x05
+	u16	reserved1;		// Reserved			x06-x07
+	u16	reserved2:14;		// Reserved			x08-x09
+	u8	shared_proc:1;		// Shared processor indicator	...
+	u8	secondary_thread:1;	// Secondary thread indicator	...
+	volatile u8 dyn_proc_status:8;	// Dynamic Status of this proc	x0A-x0A
+	u8	secondary_thread_count;	// Secondary thread count	x0B-x0B
+	volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D
+	volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F
+	u32	decr_val;   		// Value for Decr programming 	x10-x13
+	u32	pmc_val;       		// Value for PMC regs         	x14-x17
+	volatile u32 dyn_hw_node_id;	// Dynamic Hardware Node id	x18-x1B
+	volatile u32 dyn_hw_proc_id;	// Dynamic Hardware Proc Id	x1C-x1F
+	volatile u32 dyn_pir;		// Dynamic ProcIdReg value	x20-x23
+	u32	dsei_data;           	// DSEI data                  	x24-x27
+	u64	sprg3;               	// SPRG3 value                	x28-x2F
+	u8	reserved3[80];		// Reserved			x30-x7F
+
+//=============================================================================
+// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
+//=============================================================================
+	// This Dword contains a byte for each type of interrupt that can occur.
+	// The IPI is a count while the others are just a binary 1 or 0.
+	union {
+		u64	any_int;
+		struct {
+			u16	reserved;	// Reserved - cleared by #mpasmbl
+			u8	xirr_int;	// Indicates xXirrValue is valid or Immed IO
+			u8	ipi_cnt;	// IPI Count
+			u8	decr_int;	// DECR interrupt occurred
+			u8	pdc_int;	// PDC interrupt occurred
+			u8	quantum_int;	// Interrupt quantum reached
+			u8	old_plic_deferred_ext_int;	// Old PLIC has a deferred XIRR pending
+		} fields;
+	} int_dword;
+
+	// Whenever any fields in this Dword are set then PLIC will defer the
+	// processing of external interrupts.  Note that PLIC will store the
+	// XIRR directly into the xXirrValue field so that another XIRR will
+	// not be presented until this one clears.  The layout of the low
+	// 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
+	// entire Dword is zero or not.  A non-zero value in the low order
+	// 2-bytes will result in SLIC being granted the highest thread
+	// priority upon return.  A 0 will return to SLIC as medium priority.
+	u64	plic_defer_ints_area;	// Entire Dword
+
+	// Used to pass the real SRR0/1 from PLIC to SLIC as well as to
+	// pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid.
+	u64	saved_srr0;		// Saved SRR0                   x10-x17
+	u64	saved_srr1;		// Saved SRR1                   x18-x1F
+
+	// Used to pass parms from the OS to PLIC for SetAsrAndRfid
+	u64	saved_gpr3;		// Saved GPR3                   x20-x27
+	u64	saved_gpr4;		// Saved GPR4                   x28-x2F
+	u64	saved_gpr5;		// Saved GPR5                   x30-x37
+
+	u8	reserved4;		// Reserved			x38-x38
+	u8	donate_dedicated_cpu;	// Donate dedicated CPU cycles  x39-x39
+	u8	fpregs_in_use;		// FP regs in use               x3A-x3A
+	u8	pmcregs_in_use;		// PMC regs in use              x3B-x3B
+	volatile u32 saved_decr;	// Saved Decr Value             x3C-x3F
+	volatile u64 emulated_time_base;// Emulated TB for this thread  x40-x47
+	volatile u64 cur_plic_latency;	// Unaccounted PLIC latency     x48-x4F
+	u64	tot_plic_latency;	// Accumulated PLIC latency     x50-x57
+	u64	wait_state_cycles;	// Wait cycles for this proc    x58-x5F
+	u64	end_of_quantum;		// TB at end of quantum         x60-x67
+	u64	pdc_saved_sprg1;	// Saved SPRG1 for PMC int      x68-x6F
+	u64	pdc_saved_srr0;		// Saved SRR0 for PMC int       x70-x77
+	volatile u32 virtual_decr;	// Virtual DECR for shared procsx78-x7B
+	u16	slb_count;		// # of SLBs to maintain        x7C-x7D
+	u8	idle;			// Indicate OS is idle          x7E
+	u8	vmxregs_in_use;		// VMX registers in use         x7F
+
+
+//=============================================================================
+// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors
+//=============================================================================
+	// This is the yield_count.  An "odd" value (low bit on) means that
+	// the processor is yielded (either because of an OS yield or a PLIC
+	// preempt).  An even value implies that the processor is currently
+	// executing.
+	// NOTE: This value will ALWAYS be zero for dedicated processors and
+	// will NEVER be zero for shared processors (ie, initialized to a 1).
+	volatile u32 yield_count;	// PLIC increments each dispatchx00-x03
+	u32 reserved6;
+	volatile u64 cmo_faults;	// CMO page fault count         x08-x0F
+	volatile u64 cmo_fault_time;	// CMO page fault time          x10-x17
+	u8	reserved7[104];		// Reserved                     x18-x7F
+
+//=============================================================================
+// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
+//=============================================================================
+	u8	pmc_save_area[256];	// PMC interrupt Area           x00-xFF
+} __attribute__((__aligned__(0x400)));
+
+extern struct lppaca lppaca[];
+
+/*
+ * SLB shadow buffer structure as defined in the PAPR.  The save_area
+ * contains adjacent ESID and VSID pairs for each shadowed SLB.  The
+ * ESID is stored in the lower 64bits, then the VSID.
+ */
+struct slb_shadow {
+	u32	persistent;		// Number of persistent SLBs	x00-x03
+	u32	buffer_length;		// Total shadow buffer length	x04-x07
+	u64	reserved;		// Alignment			x08-x0f
+	struct	{
+		u64     esid;
+		u64	vsid;
+	} save_area[SLB_NUM_BOLTED];	//				x10-x40
+} ____cacheline_aligned;
+
+extern struct slb_shadow slb_shadow[];
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
new file mode 100644
index 00000000000..81713acf752
--- /dev/null
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -0,0 +1,348 @@
+/*
+ *  PS3 hvcall interface.
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ *  Copyright 2003, 2004 (c) MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_POWERPC_LV1CALL_H)
+#define _ASM_POWERPC_LV1CALL_H
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/types.h>
+
+/* lv1 call declaration macros */
+
+#define LV1_1_IN_ARG_DECL u64 in_1
+#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2
+#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3
+#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4
+#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5
+#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6
+#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7
+#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8
+#define LV1_1_OUT_ARG_DECL u64 *out_1
+#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2
+#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3
+#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4
+#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5
+#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6
+#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7
+
+#define LV1_0_IN_0_OUT_ARG_DECL void
+#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL
+#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL
+#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL
+#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL
+#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL
+#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL
+#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL
+
+#define LV1_0_IN_1_OUT_ARG_DECL                    LV1_1_OUT_ARG_DECL
+#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+
+#define LV1_0_IN_2_OUT_ARG_DECL                    LV1_2_OUT_ARG_DECL
+#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+
+#define LV1_0_IN_3_OUT_ARG_DECL                    LV1_3_OUT_ARG_DECL
+#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+
+#define LV1_0_IN_4_OUT_ARG_DECL                    LV1_4_OUT_ARG_DECL
+#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+
+#define LV1_0_IN_5_OUT_ARG_DECL                    LV1_5_OUT_ARG_DECL
+#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+
+#define LV1_0_IN_6_OUT_ARG_DECL                    LV1_6_OUT_ARG_DECL
+#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+
+#define LV1_0_IN_7_OUT_ARG_DECL                    LV1_7_OUT_ARG_DECL
+#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+
+#define LV1_1_IN_ARGS in_1
+#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2
+#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3
+#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4
+#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5
+#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6
+#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7
+#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8
+
+#define LV1_1_OUT_ARGS out_1
+#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2
+#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3
+#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4
+#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5
+#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6
+#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7
+
+#define LV1_0_IN_0_OUT_ARGS
+#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS
+#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS
+#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS
+#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS
+#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS
+#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS
+#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS
+
+#define LV1_0_IN_1_OUT_ARGS                LV1_1_OUT_ARGS
+#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS
+
+#define LV1_0_IN_2_OUT_ARGS                LV1_2_OUT_ARGS
+#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS
+
+#define LV1_0_IN_3_OUT_ARGS                LV1_3_OUT_ARGS
+#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS
+
+#define LV1_0_IN_4_OUT_ARGS                LV1_4_OUT_ARGS
+#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS
+
+#define LV1_0_IN_5_OUT_ARGS                LV1_5_OUT_ARGS
+#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS
+
+#define LV1_0_IN_6_OUT_ARGS                LV1_6_OUT_ARGS
+#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS
+
+#define LV1_0_IN_7_OUT_ARGS                LV1_7_OUT_ARGS
+#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS
+
+/*
+ * This LV1_CALL() macro is for use by callers.  It expands into an
+ * inline call wrapper and an underscored HV call declaration.  The
+ * wrapper can be used to instrument the lv1 call interface.  The
+ * file lv1call.S defines its own LV1_CALL() macro to expand into
+ * the actual underscored call definition.
+ */
+
+#if !defined(LV1_CALL)
+#define LV1_CALL(name, in, out, num)                               \
+  extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL);      \
+  static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \
+    {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);}
+#endif
+
+#endif /* !defined(__ASSEMBLY__) */
+
+/* lv1 call table */
+
+LV1_CALL(allocate_memory,                               4, 2,   0 )
+LV1_CALL(write_htab_entry,                              4, 0,   1 )
+LV1_CALL(construct_virtual_address_space,               3, 2,   2 )
+LV1_CALL(invalidate_htab_entries,                       5, 0,   3 )
+LV1_CALL(get_virtual_address_space_id_of_ppe,           1, 1,   4 )
+LV1_CALL(query_logical_partition_address_region_info,   1, 5,   6 )
+LV1_CALL(select_virtual_address_space,                  1, 0,   7 )
+LV1_CALL(pause,                                         1, 0,   9 )
+LV1_CALL(destruct_virtual_address_space,                1, 0,  10 )
+LV1_CALL(configure_irq_state_bitmap,                    3, 0,  11 )
+LV1_CALL(connect_irq_plug_ext,                          5, 0,  12 )
+LV1_CALL(release_memory,                                1, 0,  13 )
+LV1_CALL(put_iopte,                                     5, 0,  15 )
+LV1_CALL(disconnect_irq_plug_ext,                       3, 0,  17 )
+LV1_CALL(construct_event_receive_port,                  0, 1,  18 )
+LV1_CALL(destruct_event_receive_port,                   1, 0,  19 )
+LV1_CALL(send_event_locally,                            1, 0,  24 )
+LV1_CALL(end_of_interrupt,                              1, 0,  27 )
+LV1_CALL(connect_irq_plug,                              2, 0,  28 )
+LV1_CALL(disconnect_irq_plug,                           1, 0,  29 )
+LV1_CALL(end_of_interrupt_ext,                          3, 0,  30 )
+LV1_CALL(did_update_interrupt_mask,                     2, 0,  31 )
+LV1_CALL(shutdown_logical_partition,                    1, 0,  44 )
+LV1_CALL(destruct_logical_spe,                          1, 0,  54 )
+LV1_CALL(construct_logical_spe,                         7, 6,  57 )
+LV1_CALL(set_spe_interrupt_mask,                        3, 0,  61 )
+LV1_CALL(set_spe_transition_notifier,                   3, 0,  64 )
+LV1_CALL(disable_logical_spe,                           2, 0,  65 )
+LV1_CALL(clear_spe_interrupt_status,                    4, 0,  66 )
+LV1_CALL(get_spe_interrupt_status,                      2, 1,  67 )
+LV1_CALL(get_logical_ppe_id,                            0, 1,  69 )
+LV1_CALL(set_interrupt_mask,                            5, 0,  73 )
+LV1_CALL(get_logical_partition_id,                      0, 1,  74 )
+LV1_CALL(configure_execution_time_variable,             1, 0,  77 )
+LV1_CALL(get_spe_irq_outlet,                            2, 1,  78 )
+LV1_CALL(set_spe_privilege_state_area_1_register,       3, 0,  79 )
+LV1_CALL(create_repository_node,                        6, 0,  90 )
+LV1_CALL(get_repository_node_value,                     5, 2,  91 )
+LV1_CALL(modify_repository_node_value,                  6, 0,  92 )
+LV1_CALL(remove_repository_node,                        4, 0,  93 )
+LV1_CALL(read_htab_entries,                             2, 5,  95 )
+LV1_CALL(set_dabr,                                      2, 0,  96 )
+LV1_CALL(get_total_execution_time,                      2, 1, 103 )
+LV1_CALL(allocate_io_segment,                           3, 1, 116 )
+LV1_CALL(release_io_segment,                            2, 0, 117 )
+LV1_CALL(construct_io_irq_outlet,                       1, 1, 120 )
+LV1_CALL(destruct_io_irq_outlet,                        1, 0, 121 )
+LV1_CALL(map_htab,                                      1, 1, 122 )
+LV1_CALL(unmap_htab,                                    1, 0, 123 )
+LV1_CALL(get_version_info,                              0, 1, 127 )
+LV1_CALL(insert_htab_entry,                             6, 3, 158 )
+LV1_CALL(read_virtual_uart,                             3, 1, 162 )
+LV1_CALL(write_virtual_uart,                            3, 1, 163 )
+LV1_CALL(set_virtual_uart_param,                        3, 0, 164 )
+LV1_CALL(get_virtual_uart_param,                        2, 1, 165 )
+LV1_CALL(configure_virtual_uart_irq,                    1, 1, 166 )
+LV1_CALL(open_device,                                   3, 0, 170 )
+LV1_CALL(close_device,                                  2, 0, 171 )
+LV1_CALL(map_device_mmio_region,                        5, 1, 172 )
+LV1_CALL(unmap_device_mmio_region,                      3, 0, 173 )
+LV1_CALL(allocate_device_dma_region,                    5, 1, 174 )
+LV1_CALL(free_device_dma_region,                        3, 0, 175 )
+LV1_CALL(map_device_dma_region,                         6, 0, 176 )
+LV1_CALL(unmap_device_dma_region,                       4, 0, 177 )
+LV1_CALL(net_add_multicast_address,                     4, 0, 185 )
+LV1_CALL(net_remove_multicast_address,                  4, 0, 186 )
+LV1_CALL(net_start_tx_dma,                              4, 0, 187 )
+LV1_CALL(net_stop_tx_dma,                               3, 0, 188 )
+LV1_CALL(net_start_rx_dma,                              4, 0, 189 )
+LV1_CALL(net_stop_rx_dma,                               3, 0, 190 )
+LV1_CALL(net_set_interrupt_status_indicator,            4, 0, 191 )
+LV1_CALL(net_set_interrupt_mask,                        4, 0, 193 )
+LV1_CALL(net_control,                                   6, 2, 194 )
+LV1_CALL(connect_interrupt_event_receive_port,          4, 0, 197 )
+LV1_CALL(disconnect_interrupt_event_receive_port,       4, 0, 198 )
+LV1_CALL(get_spe_all_interrupt_statuses,                1, 1, 199 )
+LV1_CALL(deconfigure_virtual_uart_irq,                  0, 0, 202 )
+LV1_CALL(enable_logical_spe,                            2, 0, 207 )
+LV1_CALL(gpu_open,                                      1, 0, 210 )
+LV1_CALL(gpu_close,                                     0, 0, 211 )
+LV1_CALL(gpu_device_map,                                1, 2, 212 )
+LV1_CALL(gpu_device_unmap,                              1, 0, 213 )
+LV1_CALL(gpu_memory_allocate,                           5, 2, 214 )
+LV1_CALL(gpu_memory_free,                               1, 0, 216 )
+LV1_CALL(gpu_context_allocate,                          2, 5, 217 )
+LV1_CALL(gpu_context_free,                              1, 0, 218 )
+LV1_CALL(gpu_context_iomap,                             5, 0, 221 )
+LV1_CALL(gpu_context_attribute,                         6, 0, 225 )
+LV1_CALL(gpu_context_intr,                              1, 1, 227 )
+LV1_CALL(gpu_attribute,                                 5, 0, 228 )
+LV1_CALL(get_rtc,                                       0, 2, 232 )
+LV1_CALL(set_ppe_periodic_tracer_frequency,             1, 0, 240 )
+LV1_CALL(start_ppe_periodic_tracer,                     5, 0, 241 )
+LV1_CALL(stop_ppe_periodic_tracer,                      1, 1, 242 )
+LV1_CALL(storage_read,                                  6, 1, 245 )
+LV1_CALL(storage_write,                                 6, 1, 246 )
+LV1_CALL(storage_send_device_command,                   6, 1, 248 )
+LV1_CALL(storage_get_async_status,                      1, 2, 249 )
+LV1_CALL(storage_check_async_status,                    2, 1, 254 )
+LV1_CALL(panic,                                         1, 0, 255 )
+LV1_CALL(construct_lpm,                                 6, 3, 140 )
+LV1_CALL(destruct_lpm,                                  1, 0, 141 )
+LV1_CALL(start_lpm,                                     1, 0, 142 )
+LV1_CALL(stop_lpm,                                      1, 1, 143 )
+LV1_CALL(copy_lpm_trace_buffer,                         3, 1, 144 )
+LV1_CALL(add_lpm_event_bookmark,                        5, 0, 145 )
+LV1_CALL(delete_lpm_event_bookmark,                     3, 0, 146 )
+LV1_CALL(set_lpm_interrupt_mask,                        3, 1, 147 )
+LV1_CALL(get_lpm_interrupt_status,                      1, 1, 148 )
+LV1_CALL(set_lpm_general_control,                       5, 2, 149 )
+LV1_CALL(set_lpm_interval,                              3, 1, 150 )
+LV1_CALL(set_lpm_trigger_control,                       3, 1, 151 )
+LV1_CALL(set_lpm_counter_control,                       4, 1, 152 )
+LV1_CALL(set_lpm_group_control,                         3, 1, 153 )
+LV1_CALL(set_lpm_debug_bus_control,                     3, 1, 154 )
+LV1_CALL(set_lpm_counter,                               5, 2, 155 )
+LV1_CALL(set_lpm_signal,                                7, 0, 156 )
+LV1_CALL(set_lpm_spr_trigger,                           2, 0, 157 )
+
+#endif
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
new file mode 100644
index 00000000000..893aafd87fd
--- /dev/null
+++ b/arch/powerpc/include/asm/machdep.h
@@ -0,0 +1,365 @@
+#ifndef _ASM_POWERPC_MACHDEP_H
+#define _ASM_POWERPC_MACHDEP_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/setup.h>
+
+/* We export this macro for external modules like Alsa to know if
+ * ppc_md.feature_call is implemented or not
+ */
+#define CONFIG_PPC_HAS_FEATURE_CALLS
+
+struct pt_regs;
+struct pci_bus;	
+struct device_node;
+struct iommu_table;
+struct rtc_time;
+struct file;
+struct pci_controller;
+#ifdef CONFIG_KEXEC
+struct kimage;
+#endif
+
+#ifdef CONFIG_SMP
+struct smp_ops_t {
+	void  (*message_pass)(int target, int msg);
+	int   (*probe)(void);
+	void  (*kick_cpu)(int nr);
+	void  (*setup_cpu)(int nr);
+	void  (*take_timebase)(void);
+	void  (*give_timebase)(void);
+	int   (*cpu_enable)(unsigned int nr);
+	int   (*cpu_disable)(void);
+	void  (*cpu_die)(unsigned int nr);
+	int   (*cpu_bootable)(unsigned int nr);
+};
+#endif
+
+struct machdep_calls {
+	char		*name;
+#ifdef CONFIG_PPC64
+	void            (*hpte_invalidate)(unsigned long slot,
+					   unsigned long va,
+					   int psize, int ssize,
+					   int local);
+	long		(*hpte_updatepp)(unsigned long slot, 
+					 unsigned long newpp, 
+					 unsigned long va,
+					 int psize, int ssize,
+					 int local);
+	void            (*hpte_updateboltedpp)(unsigned long newpp, 
+					       unsigned long ea,
+					       int psize, int ssize);
+	long		(*hpte_insert)(unsigned long hpte_group,
+				       unsigned long va,
+				       unsigned long prpn,
+				       unsigned long rflags,
+				       unsigned long vflags,
+				       int psize, int ssize);
+	long		(*hpte_remove)(unsigned long hpte_group);
+	void            (*hpte_removebolted)(unsigned long ea,
+					     int psize, int ssize);
+	void		(*flush_hash_range)(unsigned long number, int local);
+
+	/* special for kexec, to be called in real mode, linar mapping is
+	 * destroyed as well */
+	void		(*hpte_clear_all)(void);
+
+	int		(*tce_build)(struct iommu_table *tbl,
+				     long index,
+				     long npages,
+				     unsigned long uaddr,
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs);
+	void		(*tce_free)(struct iommu_table *tbl,
+				    long index,
+				    long npages);
+	unsigned long	(*tce_get)(struct iommu_table *tbl,
+				    long index);
+	void		(*tce_flush)(struct iommu_table *tbl);
+	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
+	void		(*pci_dma_bus_setup)(struct pci_bus *bus);
+
+	void __iomem *	(*ioremap)(phys_addr_t addr, unsigned long size,
+				   unsigned long flags);
+	void		(*iounmap)(volatile void __iomem *token);
+
+#ifdef CONFIG_PM
+	void		(*iommu_save)(void);
+	void		(*iommu_restore)(void);
+#endif
+#endif /* CONFIG_PPC64 */
+
+	int		(*probe)(void);
+	void		(*setup_arch)(void); /* Optional, may be NULL */
+	void		(*init_early)(void);
+	/* Optional, may be NULL. */
+	void		(*show_cpuinfo)(struct seq_file *m);
+	void		(*show_percpuinfo)(struct seq_file *m, int i);
+
+	void		(*init_IRQ)(void);
+	unsigned int	(*get_irq)(void);
+#ifdef CONFIG_KEXEC
+	void		(*kexec_cpu_down)(int crash_shutdown, int secondary);
+#endif
+
+	/* PCI stuff */
+	/* Called after scanning the bus, before allocating resources */
+	void		(*pcibios_fixup)(void);
+	int		(*pci_probe_mode)(struct pci_bus *);
+	void		(*pci_irq_fixup)(struct pci_dev *dev);
+
+	/* To setup PHBs when using automatic OF platform driver for PCI */
+	int		(*pci_setup_phb)(struct pci_controller *host);
+
+#ifdef CONFIG_PCI_MSI
+	int		(*msi_check_device)(struct pci_dev* dev,
+					    int nvec, int type);
+	int		(*setup_msi_irqs)(struct pci_dev *dev,
+					  int nvec, int type);
+	void		(*teardown_msi_irqs)(struct pci_dev *dev);
+#endif
+
+	void		(*restart)(char *cmd);
+	void		(*power_off)(void);
+	void		(*halt)(void);
+	void		(*panic)(char *str);
+	void		(*cpu_die)(void);
+
+	long		(*time_init)(void); /* Optional, may be NULL */
+
+	int		(*set_rtc_time)(struct rtc_time *);
+	void		(*get_rtc_time)(struct rtc_time *);
+	unsigned long	(*get_boot_time)(void);
+	unsigned char 	(*rtc_read_val)(int addr);
+	void		(*rtc_write_val)(int addr, unsigned char val);
+
+	void		(*calibrate_decr)(void);
+
+	void		(*progress)(char *, unsigned short);
+
+	/* Interface for platform error logging */
+	void 		(*log_error)(char *buf, unsigned int err_type, int fatal);
+
+	unsigned char 	(*nvram_read_val)(int addr);
+	void		(*nvram_write_val)(int addr, unsigned char val);
+	ssize_t		(*nvram_write)(char *buf, size_t count, loff_t *index);
+	ssize_t		(*nvram_read)(char *buf, size_t count, loff_t *index);	
+	ssize_t		(*nvram_size)(void);		
+	void		(*nvram_sync)(void);
+
+	/* Exception handlers */
+	int		(*system_reset_exception)(struct pt_regs *regs);
+	int 		(*machine_check_exception)(struct pt_regs *regs);
+
+	/* Motherboard/chipset features. This is a kind of general purpose
+	 * hook used to control some machine specific features (like reset
+	 * lines, chip power control, etc...).
+	 */
+	long	 	(*feature_call)(unsigned int feature, ...);
+
+	/* Get legacy PCI/IDE interrupt mapping */ 
+	int		(*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel);
+	
+	/* Get access protection for /dev/mem */
+	pgprot_t	(*phys_mem_access_prot)(struct file *file,
+						unsigned long pfn,
+						unsigned long size,
+						pgprot_t vma_prot);
+
+	/* Idle loop for this platform, leave empty for default idle loop */
+	void		(*idle_loop)(void);
+
+	/*
+	 * Function for waiting for work with reduced power in idle loop;
+	 * called with interrupts disabled.
+	 */
+	void		(*power_save)(void);
+
+	/* Function to enable performance monitor counters for this
+	   platform, called once per cpu. */
+	void		(*enable_pmcs)(void);
+
+	/* Set DABR for this platform, leave empty for default implemenation */
+	int		(*set_dabr)(unsigned long dabr);
+
+#ifdef CONFIG_PPC32	/* XXX for now */
+	/* A general init function, called by ppc_init in init/main.c.
+	   May be NULL. */
+	void		(*init)(void);
+
+	void		(*kgdb_map_scc)(void);
+
+	/*
+	 * optional PCI "hooks"
+	 */
+	/* Called in indirect_* to avoid touching devices */
+	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
+	/* Called at then very end of pcibios_init() */
+	void (*pcibios_after_init)(void);
+
+#endif /* CONFIG_PPC32 */
+
+	/* Called after PPC generic resource fixup to perform
+	   machine specific fixups */
+	void (*pcibios_fixup_resources)(struct pci_dev *);
+
+	/* Called for each PCI bus in the system when it's probed */
+	void (*pcibios_fixup_bus)(struct pci_bus *);
+
+	/* Called when pci_enable_device() is called. Returns 0 to
+	 * allow assignment/enabling of the device. */
+	int  (*pcibios_enable_device_hook)(struct pci_dev *);
+
+	/* Called to shutdown machine specific hardware not already controlled
+	 * by other drivers.
+	 */
+	void (*machine_shutdown)(void);
+
+#ifdef CONFIG_KEXEC
+	/* Called to do the minimal shutdown needed to run a kexec'd kernel
+	 * to run successfully.
+	 * XXX Should we move this one out of kexec scope?
+	 */
+	void (*machine_crash_shutdown)(struct pt_regs *regs);
+
+	/* Called to do what every setup is needed on image and the
+	 * reboot code buffer. Returns 0 on success.
+	 * Provide your own (maybe dummy) implementation if your platform
+	 * claims to support kexec.
+	 */
+	int (*machine_kexec_prepare)(struct kimage *image);
+
+	/* Called to handle any machine specific cleanup on image */
+	void (*machine_kexec_cleanup)(struct kimage *image);
+
+	/* Called to perform the _real_ kexec.
+	 * Do NOT allocate memory or fail here. We are past the point of
+	 * no return.
+	 */
+	void (*machine_kexec)(struct kimage *image);
+#endif /* CONFIG_KEXEC */
+
+#ifdef CONFIG_SUSPEND
+	/* These are called to disable and enable, respectively, IRQs when
+	 * entering a suspend state.  If NULL, then the generic versions
+	 * will be called.  The generic versions disable/enable the
+	 * decrementer along with interrupts.
+	 */
+	void (*suspend_disable_irqs)(void);
+	void (*suspend_enable_irqs)(void);
+#endif
+};
+
+extern void e500_idle(void);
+extern void power4_idle(void);
+extern void power4_cpu_offline_powersave(void);
+extern void ppc6xx_idle(void);
+
+/*
+ * ppc_md contains a copy of the machine description structure for the
+ * current platform. machine_id contains the initial address where the
+ * description was found during boot.
+ */
+extern struct machdep_calls ppc_md;
+extern struct machdep_calls *machine_id;
+
+#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
+
+#define define_machine(name)					\
+	extern struct machdep_calls mach_##name;		\
+	EXPORT_SYMBOL(mach_##name);				\
+	struct machdep_calls mach_##name __machine_desc =
+
+#define machine_is(name) \
+	({ \
+		extern struct machdep_calls mach_##name \
+			__attribute__((weak));		 \
+		machine_id == &mach_##name; \
+	})
+
+extern void probe_machine(void);
+
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_PPC_PMAC
+/*
+ * Power macintoshes have either a CUDA, PMU or SMU controlling
+ * system reset, power, NVRAM, RTC.
+ */
+typedef enum sys_ctrler_kind {
+	SYS_CTRLER_UNKNOWN = 0,
+	SYS_CTRLER_CUDA = 1,
+	SYS_CTRLER_PMU = 2,
+	SYS_CTRLER_SMU = 3,
+} sys_ctrler_t;
+extern sys_ctrler_t sys_ctrler;
+
+#endif /* CONFIG_PPC_PMAC */
+
+extern void setup_pci_ptrs(void);
+
+#ifdef CONFIG_SMP
+/* Poor default implementations */
+extern void __devinit smp_generic_give_timebase(void);
+extern void __devinit smp_generic_take_timebase(void);
+#endif /* CONFIG_SMP */
+
+
+/* Functions to produce codes on the leds.
+ * The SRC code should be unique for the message category and should
+ * be limited to the lower 24 bits (the upper 8 are set by these funcs),
+ * and (for boot & dump) should be sorted numerically in the order
+ * the events occur.
+ */
+/* Print a boot progress message. */
+void ppc64_boot_msg(unsigned int src, const char *msg);
+/* Print a termination message (print only -- does not stop the kernel) */
+void ppc64_terminate_msg(unsigned int src, const char *msg);
+
+static inline void log_error(char *buf, unsigned int err_type, int fatal)
+{
+	if (ppc_md.log_error)
+		ppc_md.log_error(buf, err_type, fatal);
+}
+
+#define __define_machine_initcall(mach,level,fn,id) \
+	static int __init __machine_initcall_##mach##_##fn(void) { \
+		if (machine_is(mach)) return fn(); \
+		return 0; \
+	} \
+	__define_initcall(level,__machine_initcall_##mach##_##fn,id);
+
+#define machine_core_initcall(mach,fn)		__define_machine_initcall(mach,"1",fn,1)
+#define machine_core_initcall_sync(mach,fn)	__define_machine_initcall(mach,"1s",fn,1s)
+#define machine_postcore_initcall(mach,fn)	__define_machine_initcall(mach,"2",fn,2)
+#define machine_postcore_initcall_sync(mach,fn)	__define_machine_initcall(mach,"2s",fn,2s)
+#define machine_arch_initcall(mach,fn)		__define_machine_initcall(mach,"3",fn,3)
+#define machine_arch_initcall_sync(mach,fn)	__define_machine_initcall(mach,"3s",fn,3s)
+#define machine_subsys_initcall(mach,fn)	__define_machine_initcall(mach,"4",fn,4)
+#define machine_subsys_initcall_sync(mach,fn)	__define_machine_initcall(mach,"4s",fn,4s)
+#define machine_fs_initcall(mach,fn)		__define_machine_initcall(mach,"5",fn,5)
+#define machine_fs_initcall_sync(mach,fn)	__define_machine_initcall(mach,"5s",fn,5s)
+#define machine_rootfs_initcall(mach,fn)	__define_machine_initcall(mach,"rootfs",fn,rootfs)
+#define machine_device_initcall(mach,fn)	__define_machine_initcall(mach,"6",fn,6)
+#define machine_device_initcall_sync(mach,fn)	__define_machine_initcall(mach,"6s",fn,6s)
+#define machine_late_initcall(mach,fn)		__define_machine_initcall(mach,"7",fn,7)
+#define machine_late_initcall_sync(mach,fn)	__define_machine_initcall(mach,"7s",fn,7s)
+
+void generic_suspend_disable_irqs(void);
+void generic_suspend_enable_irqs(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_MACHDEP_H */
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
new file mode 100644
index 00000000000..079c06eae44
--- /dev/null
+++ b/arch/powerpc/include/asm/macio.h
@@ -0,0 +1,142 @@
+#ifndef __MACIO_ASIC_H__
+#define __MACIO_ASIC_H__
+#ifdef __KERNEL__
+
+#include <linux/of_device.h>
+
+extern struct bus_type macio_bus_type;
+
+/* MacIO device driver is defined later */
+struct macio_driver;
+struct macio_chip;
+
+#define MACIO_DEV_COUNT_RESOURCES	8
+#define MACIO_DEV_COUNT_IRQS		8
+
+/*
+ * the macio_bus structure is used to describe a "virtual" bus
+ * within a MacIO ASIC. It's typically provided by a macio_pci_asic
+ * PCI device, but could be provided differently as well (nubus
+ * machines using a fake OF tree).
+ *
+ * The pdev field can be NULL on non-PCI machines
+ */
+struct macio_bus
+{
+	struct macio_chip	*chip;		/* macio_chip (private use) */
+	int			index;		/* macio chip index in system */
+#ifdef CONFIG_PCI
+	struct pci_dev		*pdev;		/* PCI device hosting this bus */
+#endif
+};
+
+/*
+ * the macio_dev structure is used to describe a device
+ * within an Apple MacIO ASIC.
+ */
+struct macio_dev
+{
+	struct macio_bus	*bus;		/* macio bus this device is on */
+	struct macio_dev	*media_bay;	/* Device is part of a media bay */
+	struct of_device	ofdev;
+	int			n_resources;
+	struct resource		resource[MACIO_DEV_COUNT_RESOURCES];
+	int			n_interrupts;
+	struct resource		interrupt[MACIO_DEV_COUNT_IRQS];
+};
+#define	to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
+#define	of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
+
+extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
+extern void macio_dev_put(struct macio_dev *dev);
+
+/*
+ * Accessors to resources & interrupts and other device
+ * fields
+ */
+
+static inline int macio_resource_count(struct macio_dev *dev)
+{
+	return dev->n_resources;
+}
+
+static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
+{
+	return dev->resource[resource_no].start;
+}
+
+static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
+{
+	return dev->resource[resource_no].end;
+}
+
+static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
+{
+	struct resource *res = &dev->resource[resource_no];
+	if (res->start == 0 || res->end == 0 || res->end < res->start)
+		return 0;
+	return res->end - res->start + 1;
+}
+
+extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
+extern void macio_release_resource(struct macio_dev *dev, int resource_no);
+extern int macio_request_resources(struct macio_dev *dev, const char *name);
+extern void macio_release_resources(struct macio_dev *dev);
+
+static inline int macio_irq_count(struct macio_dev *dev)
+{
+	return dev->n_interrupts;
+}
+
+static inline int macio_irq(struct macio_dev *dev, int irq_no)
+{
+	return dev->interrupt[irq_no].start;
+}
+
+static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
+{
+	dev_set_drvdata(&dev->ofdev.dev, data);
+}
+
+static inline void* macio_get_drvdata(struct macio_dev *dev)
+{
+	return dev_get_drvdata(&dev->ofdev.dev);
+}
+
+static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
+{
+	return mdev->ofdev.node;
+}
+
+#ifdef CONFIG_PCI
+static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
+{
+	return mdev->bus->pdev;
+}
+#endif
+
+/*
+ * A driver for a mac-io chip based device
+ */
+struct macio_driver
+{
+	char			*name;
+	struct of_device_id	*match_table;
+	struct module		*owner;
+
+	int	(*probe)(struct macio_dev* dev, const struct of_device_id *match);
+	int	(*remove)(struct macio_dev* dev);
+
+	int	(*suspend)(struct macio_dev* dev, pm_message_t state);
+	int	(*resume)(struct macio_dev* dev);
+	int	(*shutdown)(struct macio_dev* dev);
+
+	struct device_driver	driver;
+};
+#define	to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
+
+extern int macio_register_driver(struct macio_driver *);
+extern void macio_unregister_driver(struct macio_driver *);
+
+#endif /* __KERNEL__ */
+#endif /* __MACIO_ASIC_H__ */
diff --git a/arch/powerpc/include/asm/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..f2741c8b59a
--- /dev/null
+++ b/arch/powerpc/include/asm/mc146818rtc.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_POWERPC_MC146818RTC_H
+#define _ASM_POWERPC_MC146818RTC_H
+
+/*
+ * Machine dependent access functions for RTC registers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MC146818RTC_H */
diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h
new file mode 100644
index 00000000000..b2efb332580
--- /dev/null
+++ b/arch/powerpc/include/asm/mediabay.h
@@ -0,0 +1,43 @@
+/*
+ * mediabay.h: definitions for using the media bay
+ * on PowerBook 3400 and similar computers.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+#ifndef _PPC_MEDIABAY_H
+#define _PPC_MEDIABAY_H
+
+#ifdef __KERNEL__
+
+#define MB_FD		0	/* media bay contains floppy drive (automatic eject ?) */
+#define MB_FD1		1	/* media bay contains floppy drive (manual eject ?) */
+#define MB_SOUND	2	/* sound device ? */
+#define MB_CD		3	/* media bay contains ATA drive such as CD or ZIP */
+#define MB_PCI		5	/* media bay contains a PCI device */
+#define MB_POWER	6	/* media bay contains a Power device (???) */
+#define MB_NO		7	/* media bay contains nothing */
+
+/* Number of bays in the machine or 0 */
+extern int media_bay_count;
+
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+#include <linux/ide.h>
+
+int check_media_bay_by_base(unsigned long base, int what);
+/* called by IDE PMAC host driver to register IDE controller for media bay */
+int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
+			    int irq, ide_hwif_t *hwif);
+
+int check_media_bay(struct device_node *which_bay, int what);
+
+#else
+
+static inline int check_media_bay(struct device_node *which_bay, int what)
+{
+	return -ENODEV;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_MEDIABAY_H */
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
new file mode 100644
index 00000000000..9209f755763
--- /dev/null
+++ b/arch/powerpc/include/asm/mman.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_POWERPC_MMAN_H
+#define _ASM_POWERPC_MMAN_H
+
+#include <asm-generic/mman.h>
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define PROT_SAO	0x10		/* Strong Access Ordering */
+
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_LOCKED	0x80
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#include <asm/cputable.h>
+#include <linux/mm.h>
+
+/*
+ * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits()
+ * here.  How important is the optimization?
+ */
+static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot)
+{
+	return (prot & PROT_SAO) ? VM_SAO : 0;
+}
+#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot)
+
+static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
+{
+	return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0;
+}
+#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
+
+static inline int arch_validate_prot(unsigned long prot)
+{
+	if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO))
+		return 0;
+	if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO))
+		return 0;
+	return 1;
+}
+#define arch_validate_prot(prot) arch_validate_prot(prot)
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MMAN_H */
diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
new file mode 100644
index 00000000000..3d108676584
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-40x.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_POWERPC_MMU_40X_H_
+#define _ASM_POWERPC_MMU_40X_H_
+
+/*
+ * PPC40x support
+ */
+
+#define PPC40X_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion.  On all architectures, the data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
+ * instructions.
+ */
+
+#define	TLB_LO          1
+#define	TLB_HI          0
+
+#define	TLB_DATA        TLB_LO
+#define	TLB_TAG         TLB_HI
+
+/* Tag portion */
+
+#define TLB_EPN_MASK    0xFFFFFC00      /* Effective Page Number */
+#define TLB_PAGESZ_MASK 0x00000380
+#define TLB_PAGESZ(x)   (((x) & 0x7) << 7)
+#define   PAGESZ_1K		0
+#define   PAGESZ_4K             1
+#define   PAGESZ_16K            2
+#define   PAGESZ_64K            3
+#define   PAGESZ_256K           4
+#define   PAGESZ_1M             5
+#define   PAGESZ_4M             6
+#define   PAGESZ_16M            7
+#define TLB_VALID       0x00000040      /* Entry is valid */
+
+/* Data portion */
+
+#define TLB_RPN_MASK    0xFFFFFC00      /* Real Page Number */
+#define TLB_PERM_MASK   0x00000300
+#define TLB_EX          0x00000200      /* Instruction execution allowed */
+#define TLB_WR          0x00000100      /* Writes permitted */
+#define TLB_ZSEL_MASK   0x000000F0
+#define TLB_ZSEL(x)     (((x) & 0xF) << 4)
+#define TLB_ATTR_MASK   0x0000000F
+#define TLB_W           0x00000008      /* Caching is write-through */
+#define TLB_I           0x00000004      /* Caching is inhibited */
+#define TLB_M           0x00000002      /* Memory is coherent */
+#define TLB_G           0x00000001      /* Memory is guarded from prefetch */
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
new file mode 100644
index 00000000000..a825524c981
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_POWERPC_MMU_44X_H_
+#define _ASM_POWERPC_MMU_44X_H_
+/*
+ * PPC440 support
+ */
+
+#define PPC44x_MMUCR_TID	0x000000ff
+#define PPC44x_MMUCR_STS	0x00010000
+
+#define	PPC44x_TLB_PAGEID	0
+#define	PPC44x_TLB_XLAT		1
+#define	PPC44x_TLB_ATTRIB	2
+
+/* Page identification fields */
+#define PPC44x_TLB_EPN_MASK	0xfffffc00      /* Effective Page Number */
+#define	PPC44x_TLB_VALID	0x00000200      /* Valid flag */
+#define PPC44x_TLB_TS		0x00000100	/* Translation address space */
+#define PPC44x_TLB_1K		0x00000000	/* Page sizes */
+#define PPC44x_TLB_4K		0x00000010
+#define PPC44x_TLB_16K		0x00000020
+#define PPC44x_TLB_64K		0x00000030
+#define PPC44x_TLB_256K		0x00000040
+#define PPC44x_TLB_1M		0x00000050
+#define PPC44x_TLB_16M		0x00000070
+#define	PPC44x_TLB_256M		0x00000090
+
+/* Translation fields */
+#define PPC44x_TLB_RPN_MASK	0xfffffc00      /* Real Page Number */
+#define	PPC44x_TLB_ERPN_MASK	0x0000000f
+
+/* Storage attribute and access control fields */
+#define PPC44x_TLB_ATTR_MASK	0x0000ff80
+#define PPC44x_TLB_U0		0x00008000      /* User 0 */
+#define PPC44x_TLB_U1		0x00004000      /* User 1 */
+#define PPC44x_TLB_U2		0x00002000      /* User 2 */
+#define PPC44x_TLB_U3		0x00001000      /* User 3 */
+#define PPC44x_TLB_W		0x00000800      /* Caching is write-through */
+#define PPC44x_TLB_I		0x00000400      /* Caching is inhibited */
+#define PPC44x_TLB_M		0x00000200      /* Memory is coherent */
+#define PPC44x_TLB_G		0x00000100      /* Memory is guarded */
+#define PPC44x_TLB_E		0x00000080      /* Memory is guarded */
+
+#define PPC44x_TLB_PERM_MASK	0x0000003f
+#define PPC44x_TLB_UX		0x00000020      /* User execution */
+#define PPC44x_TLB_UW		0x00000010      /* User write */
+#define PPC44x_TLB_UR		0x00000008      /* User read */
+#define PPC44x_TLB_SX		0x00000004      /* Super execution */
+#define PPC44x_TLB_SW		0x00000002      /* Super write */
+#define PPC44x_TLB_SR		0x00000001      /* Super read */
+
+/* Number of TLB entries */
+#define PPC44x_TLB_SIZE		64
+
+#ifndef __ASSEMBLY__
+
+extern unsigned int tlb_44x_hwater;
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_44x
+#define PPC44x_EARLY_TLBS	1
+#else
+#define PPC44x_EARLY_TLBS	2
+#define PPC44x_EARLY_DEBUG_VIRTADDR	(ASM_CONST(0xf0000000) \
+	| (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff))
+#endif
+
+/* Size of the TLBs used for pinning in lowmem */
+#define PPC_PIN_SIZE	(1 << 28)	/* 256M */
+
+#endif /* _ASM_POWERPC_MMU_44X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
new file mode 100644
index 00000000000..9db877eb88d
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -0,0 +1,145 @@
+#ifndef _ASM_POWERPC_MMU_8XX_H_
+#define _ASM_POWERPC_MMU_8XX_H_
+/*
+ * PPC8xx support
+ */
+
+/* Control/status registers for the MPC8xx.
+ * A write operation to these registers causes serialized access.
+ * During software tablewalk, the registers used perform mask/shift-add
+ * operations when written/read.  A TLB entry is created when the Mx_RPN
+ * is written, and the contents of several registers are used to
+ * create the entry.
+ */
+#define SPRN_MI_CTR	784	/* Instruction TLB control register */
+#define MI_GPM		0x80000000	/* Set domain manager mode */
+#define MI_PPM		0x40000000	/* Set subpage protection */
+#define MI_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
+#define MI_RSV4I	0x08000000	/* Reserve 4 TLB entries */
+#define MI_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
+#define MI_IDXMASK	0x00001f00	/* TLB index to be loaded */
+#define MI_RESETVAL	0x00000000	/* Value of register at reset */
+
+/* These are the Ks and Kp from the PowerPC books.  For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MI_AP	786
+#define MI_Ks		0x80000000	/* Should not be set */
+#define MI_Kp		0x40000000	/* Should always be set */
+
+/* The effective page number register.  When read, contains the information
+ * about the last instruction TLB miss.  When MI_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MI_EPN	787
+#define MI_EPNMASK	0xfffff000	/* Effective page number for entry */
+#define MI_EVALID	0x00000200	/* Entry is valid */
+#define MI_ASIDMASK	0x0000000f	/* ASID match value */
+					/* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the instruction TLB, it contains bits that get loaded into the
+ * TLB entry when the MI_RPN is written.
+ */
+#define SPRN_MI_TWC	789
+#define MI_APG		0x000001e0	/* Access protection group (0) */
+#define MI_GUARDED	0x00000010	/* Guarded storage */
+#define MI_PSMASK	0x0000000c	/* Mask of page size bits */
+#define MI_PS8MEG	0x0000000c	/* 8M page size */
+#define MI_PS512K	0x00000004	/* 512K page size */
+#define MI_PS4K_16K	0x00000000	/* 4K or 16K page size */
+#define MI_SVALID	0x00000001	/* Segment entry is valid */
+					/* Reset value is undefined */
+
+/* Real page number.  Defined by the pte.  Writing this register
+ * causes a TLB entry to be created for the instruction TLB, using
+ * additional information from the MI_EPN, and MI_TWC registers.
+ */
+#define SPRN_MI_RPN	790
+
+/* Define an RPN value for mapping kernel memory to large virtual
+ * pages for boot initialization.  This has real page number of 0,
+ * large page size, shared page, cache enabled, and valid.
+ * Also mark all subpages valid and write access.
+ */
+#define MI_BOOTINIT	0x000001fd
+
+#define SPRN_MD_CTR	792	/* Data TLB control register */
+#define MD_GPM		0x80000000	/* Set domain manager mode */
+#define MD_PPM		0x40000000	/* Set subpage protection */
+#define MD_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
+#define MD_WTDEF	0x10000000	/* Set writethrough when MMU dis */
+#define MD_RSV4I	0x08000000	/* Reserve 4 TLB entries */
+#define MD_TWAM		0x04000000	/* Use 4K page hardware assist */
+#define MD_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
+#define MD_IDXMASK	0x00001f00	/* TLB index to be loaded */
+#define MD_RESETVAL	0x04000000	/* Value of register at reset */
+
+#define SPRN_M_CASID	793	/* Address space ID (context) to match */
+#define MC_ASIDMASK	0x0000000f	/* Bits used for ASID value */
+
+
+/* These are the Ks and Kp from the PowerPC books.  For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MD_AP	794
+#define MD_Ks		0x80000000	/* Should not be set */
+#define MD_Kp		0x40000000	/* Should always be set */
+
+/* The effective page number register.  When read, contains the information
+ * about the last instruction TLB miss.  When MD_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MD_EPN	795
+#define MD_EPNMASK	0xfffff000	/* Effective page number for entry */
+#define MD_EVALID	0x00000200	/* Entry is valid */
+#define MD_ASIDMASK	0x0000000f	/* ASID match value */
+					/* Reset value is undefined */
+
+/* The pointer to the base address of the first level page table.
+ * During a software tablewalk, reading this register provides the address
+ * of the entry associated with MD_EPN.
+ */
+#define SPRN_M_TWB	796
+#define	M_L1TB		0xfffff000	/* Level 1 table base address */
+#define M_L1INDX	0x00000ffc	/* Level 1 index, when read */
+					/* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the data TLB, it contains bits that get loaded into the TLB entry
+ * when the MD_RPN is written.  It is also provides the hardware assist
+ * for finding the PTE address during software tablewalk.
+ */
+#define SPRN_MD_TWC	797
+#define MD_L2TB		0xfffff000	/* Level 2 table base address */
+#define MD_L2INDX	0xfffffe00	/* Level 2 index (*pte), when read */
+#define MD_APG		0x000001e0	/* Access protection group (0) */
+#define MD_GUARDED	0x00000010	/* Guarded storage */
+#define MD_PSMASK	0x0000000c	/* Mask of page size bits */
+#define MD_PS8MEG	0x0000000c	/* 8M page size */
+#define MD_PS512K	0x00000004	/* 512K page size */
+#define MD_PS4K_16K	0x00000000	/* 4K or 16K page size */
+#define MD_WT		0x00000002	/* Use writethrough page attribute */
+#define MD_SVALID	0x00000001	/* Segment entry is valid */
+					/* Reset value is undefined */
+
+
+/* Real page number.  Defined by the pte.  Writing this register
+ * causes a TLB entry to be created for the data TLB, using
+ * additional information from the MD_EPN, and MD_TWC registers.
+ */
+#define SPRN_MD_RPN	798
+
+/* This is a temporary storage register that could be used to save
+ * a processor working register during a tablewalk.
+ */
+#define SPRN_M_TW	799
+
+#ifndef __ASSEMBLY__
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
new file mode 100644
index 00000000000..925d93cf64d
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-fsl-booke.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_
+#define _ASM_POWERPC_MMU_FSL_BOOKE_H_
+/*
+ * Freescale Book-E MMU support
+ */
+
+/* Book-E defined page sizes */
+#define BOOKE_PAGESZ_1K		0
+#define BOOKE_PAGESZ_4K		1
+#define BOOKE_PAGESZ_16K	2
+#define BOOKE_PAGESZ_64K	3
+#define BOOKE_PAGESZ_256K	4
+#define BOOKE_PAGESZ_1M		5
+#define BOOKE_PAGESZ_4M		6
+#define BOOKE_PAGESZ_16M	7
+#define BOOKE_PAGESZ_64M	8
+#define BOOKE_PAGESZ_256M	9
+#define BOOKE_PAGESZ_1GB	10
+#define BOOKE_PAGESZ_4GB	11
+#define BOOKE_PAGESZ_16GB	12
+#define BOOKE_PAGESZ_64GB	13
+#define BOOKE_PAGESZ_256GB	14
+#define BOOKE_PAGESZ_1TB	15
+
+#define MAS0_TLBSEL(x)	((x << 28) & 0x30000000)
+#define MAS0_ESEL(x)	((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x)	((x) & 0x00000FFF)
+
+#define MAS1_VALID 	0x80000000
+#define MAS1_IPROT	0x40000000
+#define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
+#define MAS1_TS		0x00001000
+#define MAS1_TSIZE(x)	((x << 8) & 0x00000F00)
+
+#define MAS2_EPN	0xFFFFF000
+#define MAS2_X0		0x00000040
+#define MAS2_X1		0x00000020
+#define MAS2_W		0x00000010
+#define MAS2_I		0x00000008
+#define MAS2_M		0x00000004
+#define MAS2_G		0x00000002
+#define MAS2_E		0x00000001
+
+#define MAS3_RPN	0xFFFFF000
+#define MAS3_U0		0x00000200
+#define MAS3_U1		0x00000100
+#define MAS3_U2		0x00000080
+#define MAS3_U3		0x00000040
+#define MAS3_UX		0x00000020
+#define MAS3_SX		0x00000010
+#define MAS3_UW		0x00000008
+#define MAS3_SW		0x00000004
+#define MAS3_UR		0x00000002
+#define MAS3_SR		0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_TIDDSEL	0x000F0000
+#define MAS4_TSIZED(x)	MAS1_TSIZE(x)
+#define MAS4_X0D	0x00000040
+#define MAS4_X1D	0x00000020
+#define MAS4_WD		0x00000010
+#define MAS4_ID		0x00000008
+#define MAS4_MD		0x00000004
+#define MAS4_GD		0x00000002
+#define MAS4_ED		0x00000001
+
+#define MAS6_SPID0	0x3FFF0000
+#define MAS6_SPID1	0x00007FFE
+#define MAS6_SAS	0x00000001
+#define MAS6_SPID	MAS6_SPID0
+
+#define MAS7_RPN	0xFFFFFFFF
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
new file mode 100644
index 00000000000..16b1a1e77e6
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-hash32.h
@@ -0,0 +1,83 @@
+#ifndef _ASM_POWERPC_MMU_HASH32_H_
+#define _ASM_POWERPC_MMU_HASH32_H_
+/*
+ * 32-bit hash table MMU support
+ */
+
+/*
+ * BATs
+ */
+
+/* Block size masks */
+#define BL_128K	0x000
+#define BL_256K 0x001
+#define BL_512K 0x003
+#define BL_1M   0x007
+#define BL_2M   0x00F
+#define BL_4M   0x01F
+#define BL_8M   0x03F
+#define BL_16M  0x07F
+#define BL_32M  0x0FF
+#define BL_64M  0x1FF
+#define BL_128M 0x3FF
+#define BL_256M 0x7FF
+
+/* BAT Access Protection */
+#define BPP_XX	0x00		/* No access */
+#define BPP_RX	0x01		/* Read only */
+#define BPP_RW	0x02		/* Read/write */
+
+#ifndef __ASSEMBLY__
+/* Contort a phys_addr_t into the right format/bits for a BAT */
+#ifdef CONFIG_PHYS_64BIT
+#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \
+				((x & 0x0000000e00000000ULL) >> 24) | \
+				((x & 0x0000000100000000ULL) >> 30)))
+#else
+#define BAT_PHYS_ADDR(x) (x)
+#endif
+
+struct ppc_bat {
+	u32 batu;
+	u32 batl;
+};
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hash table
+ */
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+#ifndef __ASSEMBLY__
+
+/* Hardware Page Table Entry */
+struct hash_pte {
+	unsigned long v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long h:1;	/* Hash algorithm indicator */
+	unsigned long api:6;	/* Abbreviated page index */
+	unsigned long rpn:20;	/* Real (physical) page number */
+	unsigned long    :3;	/* Unused */
+	unsigned long r:1;	/* Referenced */
+	unsigned long c:1;	/* Changed */
+	unsigned long w:1;	/* Write-thru cache mode */
+	unsigned long i:1;	/* Cache inhibited */
+	unsigned long m:1;	/* Memory coherence */
+	unsigned long g:1;	/* Guarded */
+	unsigned long  :1;	/* Unused */
+	unsigned long pp:2;	/* Page protection */
+};
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
new file mode 100644
index 00000000000..c2df53c5ceb
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -0,0 +1,478 @@
+#ifndef _ASM_POWERPC_MMU_HASH64_H_
+#define _ASM_POWERPC_MMU_HASH64_H_
+/*
+ * PowerPC64 memory management structures
+ *
+ * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com>
+ *   PPC64 rework.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-compat.h>
+#include <asm/page.h>
+
+/*
+ * Segment table
+ */
+
+#define STE_ESID_V	0x80
+#define STE_ESID_KS	0x20
+#define STE_ESID_KP	0x10
+#define STE_ESID_N	0x08
+
+#define STE_VSID_SHIFT	12
+
+/* Location of cpu0's segment table */
+#define STAB0_PAGE	0x6
+#define STAB0_OFFSET	(STAB0_PAGE << 12)
+#define STAB0_PHYS_ADDR	(STAB0_OFFSET + PHYSICAL_START)
+
+#ifndef __ASSEMBLY__
+extern char initial_stab[];
+#endif /* ! __ASSEMBLY */
+
+/*
+ * SLB
+ */
+
+#define SLB_NUM_BOLTED		3
+#define SLB_CACHE_ENTRIES	8
+
+/* Bits in the SLB ESID word */
+#define SLB_ESID_V		ASM_CONST(0x0000000008000000) /* valid */
+
+/* Bits in the SLB VSID word */
+#define SLB_VSID_SHIFT		12
+#define SLB_VSID_SHIFT_1T	24
+#define SLB_VSID_SSIZE_SHIFT	62
+#define SLB_VSID_B		ASM_CONST(0xc000000000000000)
+#define SLB_VSID_B_256M		ASM_CONST(0x0000000000000000)
+#define SLB_VSID_B_1T		ASM_CONST(0x4000000000000000)
+#define SLB_VSID_KS		ASM_CONST(0x0000000000000800)
+#define SLB_VSID_KP		ASM_CONST(0x0000000000000400)
+#define SLB_VSID_N		ASM_CONST(0x0000000000000200) /* no-execute */
+#define SLB_VSID_L		ASM_CONST(0x0000000000000100)
+#define SLB_VSID_C		ASM_CONST(0x0000000000000080) /* class */
+#define SLB_VSID_LP		ASM_CONST(0x0000000000000030)
+#define SLB_VSID_LP_00		ASM_CONST(0x0000000000000000)
+#define SLB_VSID_LP_01		ASM_CONST(0x0000000000000010)
+#define SLB_VSID_LP_10		ASM_CONST(0x0000000000000020)
+#define SLB_VSID_LP_11		ASM_CONST(0x0000000000000030)
+#define SLB_VSID_LLP		(SLB_VSID_L|SLB_VSID_LP)
+
+#define SLB_VSID_KERNEL		(SLB_VSID_KP)
+#define SLB_VSID_USER		(SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C)
+
+#define SLBIE_C			(0x08000000)
+#define SLBIE_SSIZE_SHIFT	25
+
+/*
+ * Hash table
+ */
+
+#define HPTES_PER_GROUP 8
+
+#define HPTE_V_SSIZE_SHIFT	62
+#define HPTE_V_AVPN_SHIFT	7
+#define HPTE_V_AVPN		ASM_CONST(0x3fffffffffffff80)
+#define HPTE_V_AVPN_VAL(x)	(((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT)
+#define HPTE_V_COMPARE(x,y)	(!(((x) ^ (y)) & 0xffffffffffffff80UL))
+#define HPTE_V_BOLTED		ASM_CONST(0x0000000000000010)
+#define HPTE_V_LOCK		ASM_CONST(0x0000000000000008)
+#define HPTE_V_LARGE		ASM_CONST(0x0000000000000004)
+#define HPTE_V_SECONDARY	ASM_CONST(0x0000000000000002)
+#define HPTE_V_VALID		ASM_CONST(0x0000000000000001)
+
+#define HPTE_R_PP0		ASM_CONST(0x8000000000000000)
+#define HPTE_R_TS		ASM_CONST(0x4000000000000000)
+#define HPTE_R_RPN_SHIFT	12
+#define HPTE_R_RPN		ASM_CONST(0x3ffffffffffff000)
+#define HPTE_R_FLAGS		ASM_CONST(0x00000000000003ff)
+#define HPTE_R_PP		ASM_CONST(0x0000000000000003)
+#define HPTE_R_N		ASM_CONST(0x0000000000000004)
+#define HPTE_R_C		ASM_CONST(0x0000000000000080)
+#define HPTE_R_R		ASM_CONST(0x0000000000000100)
+
+#define HPTE_V_1TB_SEG		ASM_CONST(0x4000000000000000)
+#define HPTE_V_VRMA_MASK	ASM_CONST(0x4001ffffff000000)
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+/* pp0 will always be 0 for linux     */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+#ifndef __ASSEMBLY__
+
+struct hash_pte {
+	unsigned long v;
+	unsigned long r;
+};
+
+extern struct hash_pte *htab_address;
+extern unsigned long htab_size_bytes;
+extern unsigned long htab_hash_mask;
+
+/*
+ * Page size definition
+ *
+ *    shift : is the "PAGE_SHIFT" value for that page size
+ *    sllp  : is a bit mask with the value of SLB L || LP to be or'ed
+ *            directly to a slbmte "vsid" value
+ *    penc  : is the HPTE encoding mask for the "LP" field:
+ *
+ */
+struct mmu_psize_def
+{
+	unsigned int	shift;	/* number of bits */
+	unsigned int	penc;	/* HPTE encoding */
+	unsigned int	tlbiel;	/* tlbiel supported for that page size */
+	unsigned long	avpnm;	/* bits to mask out in AVPN in the HPTE */
+	unsigned long	sllp;	/* SLB L||LP (exact mask to use in slbmte) */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The kernel use the constants below to index in the page sizes array.
+ * The use of fixed constants for this purpose is better for performances
+ * of the low level hash refill handlers.
+ *
+ * A non supported page size has a "shift" field set to 0
+ *
+ * Any new page size being implemented can get a new entry in here. Whether
+ * the kernel will use it or not is a different matter though. The actual page
+ * size used by hugetlbfs is not defined here and may be made variable
+ */
+
+#define MMU_PAGE_4K		0	/* 4K */
+#define MMU_PAGE_64K		1	/* 64K */
+#define MMU_PAGE_64K_AP		2	/* 64K Admixed (in a 4K segment) */
+#define MMU_PAGE_1M		3	/* 1M */
+#define MMU_PAGE_16M		4	/* 16M */
+#define MMU_PAGE_16G		5	/* 16G */
+#define MMU_PAGE_COUNT		6
+
+/*
+ * Segment sizes.
+ * These are the values used by hardware in the B field of
+ * SLB entries and the first dword of MMU hashtable entries.
+ * The B field is 2 bits; the values 2 and 3 are unused and reserved.
+ */
+#define MMU_SEGSIZE_256M	0
+#define MMU_SEGSIZE_1T		1
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The current system page and segment sizes
+ */
+extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+extern int mmu_linear_psize;
+extern int mmu_virtual_psize;
+extern int mmu_vmalloc_psize;
+extern int mmu_vmemmap_psize;
+extern int mmu_io_psize;
+extern int mmu_kernel_ssize;
+extern int mmu_highuser_ssize;
+extern u16 mmu_slb_size;
+extern unsigned long tce_alloc_start, tce_alloc_end;
+
+/*
+ * If the processor supports 64k normal pages but not 64k cache
+ * inhibited pages, we have to be prepared to switch processes
+ * to use 4k pages when they create cache-inhibited mappings.
+ * If this is the case, mmu_ci_restrictions will be set to 1.
+ */
+extern int mmu_ci_restrictions;
+
+#ifdef CONFIG_HUGETLB_PAGE
+/*
+ * The page size indexes of the huge pages for use by hugetlbfs
+ */
+extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT];
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
+/*
+ * This function sets the AVPN and L fields of the HPTE  appropriately
+ * for the page size
+ */
+static inline unsigned long hpte_encode_v(unsigned long va, int psize,
+					  int ssize)
+{
+	unsigned long v;
+	v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
+	v <<= HPTE_V_AVPN_SHIFT;
+	if (psize != MMU_PAGE_4K)
+		v |= HPTE_V_LARGE;
+	v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
+	return v;
+}
+
+/*
+ * This function sets the ARPN, and LP fields of the HPTE appropriately
+ * for the page size. We assume the pa is already "clean" that is properly
+ * aligned for the requested page size
+ */
+static inline unsigned long hpte_encode_r(unsigned long pa, int psize)
+{
+	unsigned long r;
+
+	/* A 4K page needs no special encoding */
+	if (psize == MMU_PAGE_4K)
+		return pa & HPTE_R_RPN;
+	else {
+		unsigned int penc = mmu_psize_defs[psize].penc;
+		unsigned int shift = mmu_psize_defs[psize].shift;
+		return (pa & ~((1ul << shift) - 1)) | (penc << 12);
+	}
+	return r;
+}
+
+/*
+ * Build a VA given VSID, EA and segment size
+ */
+static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid,
+				   int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return (vsid << 28) | (ea & 0xfffffffUL);
+	return (vsid << 40) | (ea & 0xffffffffffUL);
+}
+
+/*
+ * This hashes a virtual address
+ */
+
+static inline unsigned long hpt_hash(unsigned long va, unsigned int shift,
+				     int ssize)
+{
+	unsigned long hash, vsid;
+
+	if (ssize == MMU_SEGSIZE_256M) {
+		hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift);
+	} else {
+		vsid = va >> 40;
+		hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift);
+	}
+	return hash & 0x7fffffffffUL;
+}
+
+extern int __hash_page_4K(unsigned long ea, unsigned long access,
+			  unsigned long vsid, pte_t *ptep, unsigned long trap,
+			  unsigned int local, int ssize, int subpage_prot);
+extern int __hash_page_64K(unsigned long ea, unsigned long access,
+			   unsigned long vsid, pte_t *ptep, unsigned long trap,
+			   unsigned int local, int ssize);
+struct mm_struct;
+extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
+extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
+			  unsigned long ea, unsigned long vsid, int local,
+			  unsigned long trap);
+
+extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
+			     unsigned long pstart, unsigned long prot,
+			     int psize, int ssize);
+extern void set_huge_psize(int psize);
+extern void add_gpage(unsigned long addr, unsigned long page_size,
+			  unsigned long number_of_pages);
+extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
+
+extern void htab_initialize(void);
+extern void htab_initialize_secondary(void);
+extern void hpte_init_native(void);
+extern void hpte_init_lpar(void);
+extern void hpte_init_iSeries(void);
+extern void hpte_init_beat(void);
+extern void hpte_init_beat_v3(void);
+
+extern void stabs_alloc(void);
+extern void slb_initialize(void);
+extern void slb_flush_and_rebolt(void);
+extern void stab_initialize(unsigned long stab);
+
+extern void slb_vmalloc_update(void);
+#endif /* __ASSEMBLY__ */
+
+/*
+ * VSID allocation
+ *
+ * We first generate a 36-bit "proto-VSID".  For kernel addresses this
+ * is equal to the ESID, for user addresses it is:
+ *	(context << 15) | (esid & 0x7fff)
+ *
+ * The two forms are distinguishable because the top bit is 0 for user
+ * addresses, whereas the top two bits are 1 for kernel addresses.
+ * Proto-VSIDs with the top two bits equal to 0b10 are reserved for
+ * now.
+ *
+ * The proto-VSIDs are then scrambled into real VSIDs with the
+ * multiplicative hash:
+ *
+ *	VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS
+ *	where	VSID_MULTIPLIER = 268435399 = 0xFFFFFC7
+ *		VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF
+ *
+ * This scramble is only well defined for proto-VSIDs below
+ * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are
+ * reserved.  VSID_MULTIPLIER is prime, so in particular it is
+ * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
+ * Because the modulus is 2^n-1 we can compute it efficiently without
+ * a divide or extra multiply (see below).
+ *
+ * This scheme has several advantages over older methods:
+ *
+ * 	- We have VSIDs allocated for every kernel address
+ * (i.e. everything above 0xC000000000000000), except the very top
+ * segment, which simplifies several things.
+ *
+ * 	- We allow for 15 significant bits of ESID and 20 bits of
+ * context for user addresses.  i.e. 8T (43 bits) of address space for
+ * up to 1M contexts (although the page table structure and context
+ * allocation will need changes to take advantage of this).
+ *
+ * 	- The scramble function gives robust scattering in the hash
+ * table (at least based on some initial results).  The previous
+ * method was more susceptible to pathological cases giving excessive
+ * hash collisions.
+ */
+/*
+ * WARNING - If you change these you must make sure the asm
+ * implementations in slb_allocate (slb_low.S), do_stab_bolted
+ * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly.
+ *
+ * You'll also need to change the precomputed VSID values in head.S
+ * which are used by the iSeries firmware.
+ */
+
+#define VSID_MULTIPLIER_256M	ASM_CONST(200730139)	/* 28-bit prime */
+#define VSID_BITS_256M		36
+#define VSID_MODULUS_256M	((1UL<<VSID_BITS_256M)-1)
+
+#define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
+#define VSID_BITS_1T		24
+#define VSID_MODULUS_1T		((1UL<<VSID_BITS_1T)-1)
+
+#define CONTEXT_BITS		19
+#define USER_ESID_BITS		16
+#define USER_ESID_BITS_1T	4
+
+#define USER_VSID_RANGE	(1UL << (USER_ESID_BITS + SID_SHIFT))
+
+/*
+ * This macro generates asm code to compute the VSID scramble
+ * function.  Used in slb_allocate() and do_stab_bolted.  The function
+ * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
+ *
+ *	rt = register continaing the proto-VSID and into which the
+ *		VSID will be stored
+ *	rx = scratch register (clobbered)
+ *
+ * 	- rt and rx must be different registers
+ * 	- The answer will end up in the low VSID_BITS bits of rt.  The higher
+ * 	  bits may contain other garbage, so you may need to mask the
+ * 	  result.
+ */
+#define ASM_VSID_SCRAMBLE(rt, rx, size)					\
+	lis	rx,VSID_MULTIPLIER_##size@h;				\
+	ori	rx,rx,VSID_MULTIPLIER_##size@l;				\
+	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
+									\
+	srdi	rx,rt,VSID_BITS_##size;					\
+	clrldi	rt,rt,(64-VSID_BITS_##size);				\
+	add	rt,rt,rx;		/* add high and low bits */	\
+	/* Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
+	 * 2^36-1+2^28-1.  That in particular means that if r3 >=	\
+	 * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has	\
+	 * the bit clear, r3 already has the answer we want, if it	\
+	 * doesn't, the answer is the low 36 bits of r3+1.  So in all	\
+	 * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
+	addi	rx,rt,1;						\
+	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
+	add	rt,rt,rx
+
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_context_id_t;
+
+typedef struct {
+	mm_context_id_t id;
+	u16 user_psize;		/* page size index */
+
+#ifdef CONFIG_PPC_MM_SLICES
+	u64 low_slices_psize;	/* SLB page size encodings */
+	u64 high_slices_psize;  /* 4 bits per slice for now */
+#else
+	u16 sllp;		/* SLB page size encoding */
+#endif
+	unsigned long vdso_base;
+} mm_context_t;
+
+
+#if 0
+/*
+ * The code below is equivalent to this function for arguments
+ * < 2^VSID_BITS, which is all this should ever be called
+ * with.  However gcc is not clever enough to compute the
+ * modulus (2^n-1) without a second multiply.
+ */
+#define vsid_scrample(protovsid, size) \
+	((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size))
+
+#else /* 1 */
+#define vsid_scramble(protovsid, size) \
+	({								 \
+		unsigned long x;					 \
+		x = (protovsid) * VSID_MULTIPLIER_##size;		 \
+		x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \
+		(x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \
+	})
+#endif /* 1 */
+
+/* This is only valid for addresses >= KERNELBASE */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return vsid_scramble(ea >> SID_SHIFT, 256M);
+	return vsid_scramble(ea >> SID_SHIFT_1T, 1T);
+}
+
+/* Returns the segment size indicator for a user address */
+static inline int user_segment_size(unsigned long addr)
+{
+	/* Use 1T segments if possible for addresses >= 1T */
+	if (addr >= (1UL << SID_SHIFT_1T))
+		return mmu_highuser_ssize;
+	return MMU_SEGSIZE_256M;
+}
+
+/* This is only valid for user addresses (which are below 2^44) */
+static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
+				     int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return vsid_scramble((context << USER_ESID_BITS)
+				     | (ea >> SID_SHIFT), 256M);
+	return vsid_scramble((context << USER_ESID_BITS_1T)
+			     | (ea >> SID_SHIFT_1T), 1T);
+}
+
+/*
+ * This is only used on legacy iSeries in lparmap.c,
+ * hence the 256MB segment assumption.
+ */
+#define VSID_SCRAMBLE(pvsid)	(((pvsid) * VSID_MULTIPLIER_256M) %	\
+				 VSID_MODULUS_256M)
+#define KERNEL_VSID(ea)		VSID_SCRAMBLE(GET_ESID(ea))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
new file mode 100644
index 00000000000..4c0e1b4f975
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_POWERPC_MMU_H_
+#define _ASM_POWERPC_MMU_H_
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PPC64
+/* 64-bit classic hash table MMU */
+#  include <asm/mmu-hash64.h>
+#elif defined(CONFIG_PPC_STD_MMU)
+/* 32-bit classic hash table MMU */
+#  include <asm/mmu-hash32.h>
+#elif defined(CONFIG_40x)
+/* 40x-style software loaded TLB */
+#  include <asm/mmu-40x.h>
+#elif defined(CONFIG_44x)
+/* 44x-style software loaded TLB */
+#  include <asm/mmu-44x.h>
+#elif defined(CONFIG_FSL_BOOKE)
+/* Freescale Book-E software loaded TLB */
+#  include <asm/mmu-fsl-booke.h>
+#elif defined (CONFIG_PPC_8xx)
+/* Motorola/Freescale 8xx software loaded TLB */
+#  include <asm/mmu-8xx.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
new file mode 100644
index 00000000000..6b993ef452f
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -0,0 +1,279 @@
+#ifndef __ASM_POWERPC_MMU_CONTEXT_H
+#define __ASM_POWERPC_MMU_CONTEXT_H
+#ifdef __KERNEL__
+
+#include <asm/mmu.h>	
+#include <asm/cputable.h>
+#include <asm-generic/mm_hooks.h>
+
+#ifndef CONFIG_PPC64
+#include <asm/atomic.h>
+#include <linux/bitops.h>
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context.  Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them.  That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ *  -- paulus.
+ */
+
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.  Note, if this
+ * function is changed then arch/ppc/mm/hashtable.S will have to be
+ * changed to correspond.
+ */
+#define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   The MPC8xx has only 16 contexts.  We rotate through them on each
+   task switch.  A better way would be to keep track of tasks that
+   own contexts, and implement an LRU usage.  That way very active
+   tasks don't always have to pay the TLB reload overhead.  The
+   kernel pages are mapped shared, so the kernel can run on behalf
+   of any task that makes a kernel entry.  Shared does not mean they
+   are not protected, just that the ASID comparison is not performed.
+        -- Dan
+
+   The IBM4xx has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+   	-- Dan
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_8xx
+#define NO_CONTEXT      	16
+#define LAST_CONTEXT    	15
+#define FIRST_CONTEXT    	0
+
+#elif defined(CONFIG_4xx)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#elif defined(CONFIG_E200) || defined(CONFIG_E500)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#else
+
+/* PPC 6xx, 7xx CPUs */
+#define NO_CONTEXT      	((unsigned long) -1)
+#define LAST_CONTEXT    	32767
+#define FIRST_CONTEXT    	1
+#endif
+
+/*
+ * Set the current MMU context.
+ * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
+ * loading up the segment registers for the user part of the address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(unsigned long contextid, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern unsigned long next_mmu_context;
+
+/*
+ * If we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+#if LAST_CONTEXT < 30000
+#define FEW_CONTEXTS	1
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+#endif
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	unsigned long ctx;
+
+	if (mm->context.id != NO_CONTEXT)
+		return;
+#ifdef FEW_CONTEXTS
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+#endif
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context.id = ctx;
+#ifdef FEW_CONTEXTS
+	context_mm[ctx] = mm;
+#endif
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+	mm->context.id = NO_CONTEXT;
+	return 0;
+}
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	preempt_disable();
+	if (mm->context.id != NO_CONTEXT) {
+		clear_bit(mm->context.id, context_map);
+		mm->context.id = NO_CONTEXT;
+#ifdef FEW_CONTEXTS
+		atomic_inc(&nr_free_contexts);
+#endif
+	}
+	preempt_enable();
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+	asm volatile ("dssall;\n"
+#ifndef CONFIG_POWER4
+	 "sync;\n" /* G4 needs a sync here, G5 apparently not */
+#endif
+	 : : );
+#endif /* CONFIG_ALTIVEC */
+
+	tsk->thread.pgdir = next->pgd;
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+	/* Setup new userspace context */
+	get_mmu_context(next);
+	set_context(next->context.id, next->pgd);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+#define activate_mm(active_mm, mm)   switch_mm(active_mm, mm, current)
+
+extern void mmu_context_init(void);
+
+
+#else
+
+#include <linux/kernel.h>	
+#include <linux/mm.h>	
+#include <linux/sched.h>
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+				  struct task_struct *tsk)
+{
+}
+
+/*
+ * The proto-VSID space has 2^35 - 1 segments available for user mappings.
+ * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
+ * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
+ */
+#define NO_CONTEXT	0
+#define MAX_CONTEXT	((1UL << 19) - 1)
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
+extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
+
+/*
+ * switch_mm is the entry point called from the architecture independent
+ * code in kernel/sched.c
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
+		cpu_set(smp_processor_id(), next->cpu_vm_mask);
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		asm volatile ("dssall");
+#endif /* CONFIG_ALTIVEC */
+
+	if (cpu_has_feature(CPU_FTR_SLB))
+		switch_slb(tsk, next);
+	else
+		switch_stab(tsk, next);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm(prev, next, current);
+	local_irq_restore(flags);
+}
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
new file mode 100644
index 00000000000..19f299b7e25
--- /dev/null
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -0,0 +1,47 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ *
+ * PowerPC64 port:
+ * Copyright (C) 2002 Anton Blanchard, IBM Corp.
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+#ifdef __KERNEL__
+
+
+/*
+ * generic non-linear memory support:
+ *
+ * 1) we will not split memory into more chunks than will fit into the
+ *    flags field of the struct page
+ */
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data *node_data[];
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(node_data[nid])
+
+/*
+ * Following are specific to this numa platform.
+ */
+
+extern int numa_cpu_lookup_table[];
+extern cpumask_t numa_cpumask_lookup_table[];
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern unsigned long max_pfn;
+#endif
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
+
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
new file mode 100644
index 00000000000..e5f14b13ccf
--- /dev/null
+++ b/arch/powerpc/include/asm/module.h
@@ -0,0 +1,77 @@
+#ifndef _ASM_POWERPC_MODULE_H
+#define _ASM_POWERPC_MODULE_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <asm/bug.h>
+
+
+#ifndef __powerpc64__
+/*
+ * Thanks to Paul M for explaining this.
+ *
+ * PPC can only do rel jumps += 32MB, and often the kernel and other
+ * modules are furthur away than this.  So, we jump to a table of
+ * trampolines attached to the module (the Procedure Linkage Table)
+ * whenever that happens.
+ */
+
+struct ppc_plt_entry {
+	/* 16 byte jump instruction sequence (4 instructions) */
+	unsigned int jump[4];
+};
+#endif	/* __powerpc64__ */
+
+
+struct mod_arch_specific {
+#ifdef __powerpc64__
+	unsigned int stubs_section;	/* Index of stubs section in module */
+	unsigned int toc_section;	/* What section is the TOC? */
+#else
+	/* Indices of PLT sections within module. */
+	unsigned int core_plt_section;
+	unsigned int init_plt_section;
+#endif
+
+	/* List of BUG addresses, source line numbers and filenames */
+	struct list_head bug_list;
+	struct bug_entry *bug_table;
+	unsigned int num_bugs;
+};
+
+/*
+ * Select ELF headers.
+ * Make empty section for module_frob_arch_sections to expand.
+ */
+
+#ifdef __powerpc64__
+#    define Elf_Shdr	Elf64_Shdr
+#    define Elf_Sym	Elf64_Sym
+#    define Elf_Ehdr	Elf64_Ehdr
+#    ifdef MODULE
+	asm(".section .stubs,\"ax\",@nobits; .align 3; .previous");
+#    endif
+#else
+#    define Elf_Shdr	Elf32_Shdr
+#    define Elf_Sym	Elf32_Sym
+#    define Elf_Ehdr	Elf32_Ehdr
+#    ifdef MODULE
+	asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
+	asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
+#    endif	/* MODULE */
+#endif
+
+
+struct exception_table_entry;
+void sort_ex_table(struct exception_table_entry *start,
+		   struct exception_table_entry *finish);
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MODULE_H */
diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h
new file mode 100644
index 00000000000..c48a1658eea
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc512x.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007
+ *
+ * Description:
+ * MPC5121 Prototypes and definitions
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_MPC512x_H__
+#define __ASM_POWERPC_MPC512x_H__
+
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+
+#endif /* __ASM_POWERPC_MPC512x_H__ */
+
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
new file mode 100644
index 00000000000..81ef10b6b67
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -0,0 +1,295 @@
+/*
+ * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_POWERPC_MPC52xx_H__
+#define __ASM_POWERPC_MPC52xx_H__
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/prom.h>
+#endif /* __ASSEMBLY__ */
+
+#include <linux/suspend.h>
+
+/* Variants of the 5200(B) */
+#define MPC5200_SVR		0x80110010
+#define MPC5200_SVR_MASK	0xfffffff0
+#define MPC5200B_SVR		0x80110020
+#define MPC5200B_SVR_MASK	0xfffffff0
+
+/* ======================================================================== */
+/* Structures mapping of some unit register set                             */
+/* ======================================================================== */
+
+#ifndef __ASSEMBLY__
+
+/* Memory Mapping Control */
+struct mpc52xx_mmap_ctl {
+	u32 mbar;		/* MMAP_CTRL + 0x00 */
+
+	u32 cs0_start;		/* MMAP_CTRL + 0x04 */
+	u32 cs0_stop;		/* MMAP_CTRL + 0x08 */
+	u32 cs1_start;		/* MMAP_CTRL + 0x0c */
+	u32 cs1_stop;		/* MMAP_CTRL + 0x10 */
+	u32 cs2_start;		/* MMAP_CTRL + 0x14 */
+	u32 cs2_stop;		/* MMAP_CTRL + 0x18 */
+	u32 cs3_start;		/* MMAP_CTRL + 0x1c */
+	u32 cs3_stop;		/* MMAP_CTRL + 0x20 */
+	u32 cs4_start;		/* MMAP_CTRL + 0x24 */
+	u32 cs4_stop;		/* MMAP_CTRL + 0x28 */
+	u32 cs5_start;		/* MMAP_CTRL + 0x2c */
+	u32 cs5_stop;		/* MMAP_CTRL + 0x30 */
+
+	u32 sdram0;		/* MMAP_CTRL + 0x34 */
+	u32 sdram1;		/* MMAP_CTRL + 0X38 */
+
+	u32 reserved[4];	/* MMAP_CTRL + 0x3c .. 0x48 */
+
+	u32 boot_start;		/* MMAP_CTRL + 0x4c */
+	u32 boot_stop;		/* MMAP_CTRL + 0x50 */
+
+	u32 ipbi_ws_ctrl;	/* MMAP_CTRL + 0x54 */
+
+	u32 cs6_start;		/* MMAP_CTRL + 0x58 */
+	u32 cs6_stop;		/* MMAP_CTRL + 0x5c */
+	u32 cs7_start;		/* MMAP_CTRL + 0x60 */
+	u32 cs7_stop;		/* MMAP_CTRL + 0x64 */
+};
+
+/* SDRAM control */
+struct mpc52xx_sdram {
+	u32 mode;		/* SDRAM + 0x00 */
+	u32 ctrl;		/* SDRAM + 0x04 */
+	u32 config1;		/* SDRAM + 0x08 */
+	u32 config2;		/* SDRAM + 0x0c */
+};
+
+/* SDMA */
+struct mpc52xx_sdma {
+	u32 taskBar;		/* SDMA + 0x00 */
+	u32 currentPointer;	/* SDMA + 0x04 */
+	u32 endPointer;		/* SDMA + 0x08 */
+	u32 variablePointer;	/* SDMA + 0x0c */
+
+	u8 IntVect1;		/* SDMA + 0x10 */
+	u8 IntVect2;		/* SDMA + 0x11 */
+	u16 PtdCntrl;		/* SDMA + 0x12 */
+
+	u32 IntPend;		/* SDMA + 0x14 */
+	u32 IntMask;		/* SDMA + 0x18 */
+
+	u16 tcr[16];		/* SDMA + 0x1c .. 0x3a */
+
+	u8 ipr[32];		/* SDMA + 0x3c .. 0x5b */
+
+	u32 cReqSelect;		/* SDMA + 0x5c */
+	u32 task_size0;		/* SDMA + 0x60 */
+	u32 task_size1;		/* SDMA + 0x64 */
+	u32 MDEDebug;		/* SDMA + 0x68 */
+	u32 ADSDebug;		/* SDMA + 0x6c */
+	u32 Value1;		/* SDMA + 0x70 */
+	u32 Value2;		/* SDMA + 0x74 */
+	u32 Control;		/* SDMA + 0x78 */
+	u32 Status;		/* SDMA + 0x7c */
+	u32 PTDDebug;		/* SDMA + 0x80 */
+};
+
+/* GPT */
+struct mpc52xx_gpt {
+	u32 mode;		/* GPTx + 0x00 */
+	u32 count;		/* GPTx + 0x04 */
+	u32 pwm;		/* GPTx + 0x08 */
+	u32 status;		/* GPTx + 0X0c */
+};
+
+/* GPIO */
+struct mpc52xx_gpio {
+	u32 port_config;	/* GPIO + 0x00 */
+	u32 simple_gpioe;	/* GPIO + 0x04 */
+	u32 simple_ode;		/* GPIO + 0x08 */
+	u32 simple_ddr;		/* GPIO + 0x0c */
+	u32 simple_dvo;		/* GPIO + 0x10 */
+	u32 simple_ival;	/* GPIO + 0x14 */
+	u8 outo_gpioe;		/* GPIO + 0x18 */
+	u8 reserved1[3];	/* GPIO + 0x19 */
+	u8 outo_dvo;		/* GPIO + 0x1c */
+	u8 reserved2[3];	/* GPIO + 0x1d */
+	u8 sint_gpioe;		/* GPIO + 0x20 */
+	u8 reserved3[3];	/* GPIO + 0x21 */
+	u8 sint_ode;		/* GPIO + 0x24 */
+	u8 reserved4[3];	/* GPIO + 0x25 */
+	u8 sint_ddr;		/* GPIO + 0x28 */
+	u8 reserved5[3];	/* GPIO + 0x29 */
+	u8 sint_dvo;		/* GPIO + 0x2c */
+	u8 reserved6[3];	/* GPIO + 0x2d */
+	u8 sint_inten;		/* GPIO + 0x30 */
+	u8 reserved7[3];	/* GPIO + 0x31 */
+	u16 sint_itype;		/* GPIO + 0x34 */
+	u16 reserved8;		/* GPIO + 0x36 */
+	u8 gpio_control;	/* GPIO + 0x38 */
+	u8 reserved9[3];	/* GPIO + 0x39 */
+	u8 sint_istat;		/* GPIO + 0x3c */
+	u8 sint_ival;		/* GPIO + 0x3d */
+	u8 bus_errs;		/* GPIO + 0x3e */
+	u8 reserved10;		/* GPIO + 0x3f */
+};
+
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD	4
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD	5
+#define MPC52xx_GPIO_PCI_DIS			(1<<15)
+
+/* GPIO with WakeUp*/
+struct mpc52xx_gpio_wkup {
+	u8 wkup_gpioe;		/* GPIO_WKUP + 0x00 */
+	u8 reserved1[3];	/* GPIO_WKUP + 0x03 */
+	u8 wkup_ode;		/* GPIO_WKUP + 0x04 */
+	u8 reserved2[3];	/* GPIO_WKUP + 0x05 */
+	u8 wkup_ddr;		/* GPIO_WKUP + 0x08 */
+	u8 reserved3[3];	/* GPIO_WKUP + 0x09 */
+	u8 wkup_dvo;		/* GPIO_WKUP + 0x0C */
+	u8 reserved4[3];	/* GPIO_WKUP + 0x0D */
+	u8 wkup_inten;		/* GPIO_WKUP + 0x10 */
+	u8 reserved5[3];	/* GPIO_WKUP + 0x11 */
+	u8 wkup_iinten;		/* GPIO_WKUP + 0x14 */
+	u8 reserved6[3];	/* GPIO_WKUP + 0x15 */
+	u16 wkup_itype;		/* GPIO_WKUP + 0x18 */
+	u8 reserved7[2];	/* GPIO_WKUP + 0x1A */
+	u8 wkup_maste;		/* GPIO_WKUP + 0x1C */
+	u8 reserved8[3];	/* GPIO_WKUP + 0x1D */
+	u8 wkup_ival;		/* GPIO_WKUP + 0x20 */
+	u8 reserved9[3];	/* GPIO_WKUP + 0x21 */
+	u8 wkup_istat;		/* GPIO_WKUP + 0x24 */
+	u8 reserved10[3];	/* GPIO_WKUP + 0x25 */
+};
+
+/* XLB Bus control */
+struct mpc52xx_xlb {
+	u8 reserved[0x40];
+	u32 config;		/* XLB + 0x40 */
+	u32 version;		/* XLB + 0x44 */
+	u32 status;		/* XLB + 0x48 */
+	u32 int_enable;		/* XLB + 0x4c */
+	u32 addr_capture;	/* XLB + 0x50 */
+	u32 bus_sig_capture;	/* XLB + 0x54 */
+	u32 addr_timeout;	/* XLB + 0x58 */
+	u32 data_timeout;	/* XLB + 0x5c */
+	u32 bus_act_timeout;	/* XLB + 0x60 */
+	u32 master_pri_enable;	/* XLB + 0x64 */
+	u32 master_priority;	/* XLB + 0x68 */
+	u32 base_address;	/* XLB + 0x6c */
+	u32 snoop_window;	/* XLB + 0x70 */
+};
+
+#define MPC52xx_XLB_CFG_PLDIS		(1 << 31)
+#define MPC52xx_XLB_CFG_SNOOP		(1 << 15)
+
+/* Clock Distribution control */
+struct mpc52xx_cdm {
+	u32 jtag_id;		/* CDM + 0x00  reg0 read only */
+	u32 rstcfg;		/* CDM + 0x04  reg1 read only */
+	u32 breadcrumb;		/* CDM + 0x08  reg2 */
+
+	u8 mem_clk_sel;		/* CDM + 0x0c  reg3 byte0 */
+	u8 xlb_clk_sel;		/* CDM + 0x0d  reg3 byte1 read only */
+	u8 ipb_clk_sel;		/* CDM + 0x0e  reg3 byte2 */
+	u8 pci_clk_sel;		/* CDM + 0x0f  reg3 byte3 */
+
+	u8 ext_48mhz_en;	/* CDM + 0x10  reg4 byte0 */
+	u8 fd_enable;		/* CDM + 0x11  reg4 byte1 */
+	u16 fd_counters;	/* CDM + 0x12  reg4 byte2,3 */
+
+	u32 clk_enables;	/* CDM + 0x14  reg5 */
+
+	u8 osc_disable;		/* CDM + 0x18  reg6 byte0 */
+	u8 reserved0[3];	/* CDM + 0x19  reg6 byte1,2,3 */
+
+	u8 ccs_sleep_enable;	/* CDM + 0x1c  reg7 byte0 */
+	u8 osc_sleep_enable;	/* CDM + 0x1d  reg7 byte1 */
+	u8 reserved1;		/* CDM + 0x1e  reg7 byte2 */
+	u8 ccs_qreq_test;	/* CDM + 0x1f  reg7 byte3 */
+
+	u8 soft_reset;		/* CDM + 0x20  u8 byte0 */
+	u8 no_ckstp;		/* CDM + 0x21  u8 byte0 */
+	u8 reserved2[2];	/* CDM + 0x22  u8 byte1,2,3 */
+
+	u8 pll_lock;		/* CDM + 0x24  reg9 byte0 */
+	u8 pll_looselock;	/* CDM + 0x25  reg9 byte1 */
+	u8 pll_sm_lockwin;	/* CDM + 0x26  reg9 byte2 */
+	u8 reserved3;		/* CDM + 0x27  reg9 byte3 */
+
+	u16 reserved4;		/* CDM + 0x28  reg10 byte0,1 */
+	u16 mclken_div_psc1;	/* CDM + 0x2a  reg10 byte2,3 */
+
+	u16 reserved5;		/* CDM + 0x2c  reg11 byte0,1 */
+	u16 mclken_div_psc2;	/* CDM + 0x2e  reg11 byte2,3 */
+
+	u16 reserved6;		/* CDM + 0x30  reg12 byte0,1 */
+	u16 mclken_div_psc3;	/* CDM + 0x32  reg12 byte2,3 */
+
+	u16 reserved7;		/* CDM + 0x34  reg13 byte0,1 */
+	u16 mclken_div_psc6;	/* CDM + 0x36  reg13 byte2,3 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+/* ========================================================================= */
+/* Prototypes for MPC52xx sysdev                                             */
+/* ========================================================================= */
+
+#ifndef __ASSEMBLY__
+
+/* mpc52xx_common.c */
+extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
+extern void mpc5200_setup_xlb_arbiter(void);
+extern void mpc52xx_declare_of_platform_devices(void);
+extern void mpc52xx_map_common_devices(void);
+extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
+extern void mpc52xx_restart(char *cmd);
+
+/* mpc52xx_pic.c */
+extern void mpc52xx_init_irq(void);
+extern unsigned int mpc52xx_get_irq(void);
+
+/* mpc52xx_pci.c */
+#ifdef CONFIG_PCI
+extern int __init mpc52xx_add_bridge(struct device_node *node);
+extern void __init mpc52xx_setup_pci(void);
+#else
+static inline void mpc52xx_setup_pci(void) { }
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PM
+struct mpc52xx_suspend {
+	void (*board_suspend_prepare)(void __iomem *mbar);
+	void (*board_resume_finish)(void __iomem *mbar);
+};
+
+extern struct mpc52xx_suspend mpc52xx_suspend;
+extern int __init mpc52xx_pm_init(void);
+extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
+
+#ifdef CONFIG_PPC_LITE5200
+extern int __init lite5200_pm_init(void);
+
+/* lite5200 calls mpc5200 suspend functions, so here they are */
+extern int mpc52xx_pm_prepare(void);
+extern int mpc52xx_pm_enter(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
+extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
+#endif
+#endif /* CONFIG_PM */
+
+#endif /* __ASM_POWERPC_MPC52xx_H__ */
+
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
new file mode 100644
index 00000000000..8917ed63056
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -0,0 +1,276 @@
+/*
+ * include/asm-ppc/mpc52xx_psc.h
+ *
+ * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
+ * PSCs. Theses are shared between multiple drivers since a PSC can be
+ * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based/Extracted from some header of the 2.4 originally written by
+ * Dale Farnsworth <dfarnsworth@mvista.com>
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_MPC52xx_PSC_H__
+#define __ASM_MPC52xx_PSC_H__
+
+#include <asm/types.h>
+
+/* Max number of PSCs */
+#define MPC52xx_PSC_MAXNUM	6
+
+/* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_CDE	0x0080
+#define MPC52xx_PSC_SR_RXRDY	0x0100
+#define MPC52xx_PSC_SR_RXFULL	0x0200
+#define MPC52xx_PSC_SR_TXRDY	0x0400
+#define MPC52xx_PSC_SR_TXEMP	0x0800
+#define MPC52xx_PSC_SR_OE	0x1000
+#define MPC52xx_PSC_SR_PE	0x2000
+#define MPC52xx_PSC_SR_FE	0x4000
+#define MPC52xx_PSC_SR_RB	0x8000
+
+/* PSC Command values */
+#define MPC52xx_PSC_RX_ENABLE		0x0001
+#define MPC52xx_PSC_RX_DISABLE		0x0002
+#define MPC52xx_PSC_TX_ENABLE		0x0004
+#define MPC52xx_PSC_TX_DISABLE		0x0008
+#define MPC52xx_PSC_SEL_MODE_REG_1	0x0010
+#define MPC52xx_PSC_RST_RX		0x0020
+#define MPC52xx_PSC_RST_TX		0x0030
+#define MPC52xx_PSC_RST_ERR_STAT	0x0040
+#define MPC52xx_PSC_RST_BRK_CHG_INT	0x0050
+#define MPC52xx_PSC_START_BRK		0x0060
+#define MPC52xx_PSC_STOP_BRK		0x0070
+
+/* PSC TxRx FIFO status bits */
+#define MPC52xx_PSC_RXTX_FIFO_ERR	0x0040
+#define MPC52xx_PSC_RXTX_FIFO_UF	0x0020
+#define MPC52xx_PSC_RXTX_FIFO_OF	0x0010
+#define MPC52xx_PSC_RXTX_FIFO_FR	0x0008
+#define MPC52xx_PSC_RXTX_FIFO_FULL	0x0004
+#define MPC52xx_PSC_RXTX_FIFO_ALARM	0x0002
+#define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
+
+/* PSC interrupt status/mask bits */
+#define MPC52xx_PSC_IMR_TXRDY		0x0100
+#define MPC52xx_PSC_IMR_RXRDY		0x0200
+#define MPC52xx_PSC_IMR_DB		0x0400
+#define MPC52xx_PSC_IMR_TXEMP		0x0800
+#define MPC52xx_PSC_IMR_ORERR		0x1000
+#define MPC52xx_PSC_IMR_IPC		0x8000
+
+/* PSC input port change bit */
+#define MPC52xx_PSC_CTS			0x01
+#define MPC52xx_PSC_DCD			0x02
+#define MPC52xx_PSC_D_CTS		0x10
+#define MPC52xx_PSC_D_DCD		0x20
+
+/* PSC mode fields */
+#define MPC52xx_PSC_MODE_5_BITS			0x00
+#define MPC52xx_PSC_MODE_6_BITS			0x01
+#define MPC52xx_PSC_MODE_7_BITS			0x02
+#define MPC52xx_PSC_MODE_8_BITS			0x03
+#define MPC52xx_PSC_MODE_BITS_MASK		0x03
+#define MPC52xx_PSC_MODE_PAREVEN		0x00
+#define MPC52xx_PSC_MODE_PARODD			0x04
+#define MPC52xx_PSC_MODE_PARFORCE		0x08
+#define MPC52xx_PSC_MODE_PARNONE		0x10
+#define MPC52xx_PSC_MODE_ERR			0x20
+#define MPC52xx_PSC_MODE_FFULL			0x40
+#define MPC52xx_PSC_MODE_RXRTS			0x80
+
+#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS	0x00
+#define MPC52xx_PSC_MODE_ONE_STOP		0x07
+#define MPC52xx_PSC_MODE_TWO_STOP		0x0f
+
+#define MPC52xx_PSC_RFNUM_MASK	0x01ff
+
+#define MPC52xx_PSC_SICR_DTS1			(1 << 29)
+#define MPC52xx_PSC_SICR_SHDR			(1 << 28)
+#define MPC52xx_PSC_SICR_SIM_MASK		(0xf << 24)
+#define MPC52xx_PSC_SICR_SIM_UART		(0x0 << 24)
+#define MPC52xx_PSC_SICR_SIM_UART_DCD		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_8		(0x1 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_16		(0x2 << 24)
+#define MPC52xx_PSC_SICR_SIM_AC97		(0x3 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR_DCD		(0xc << 24)
+#define MPC52xx_PSC_SICR_SIM_MIR		(0x5 << 24)
+#define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
+#define MPC52xx_PSC_SICR_I2S			(1 << 22)
+#define MPC52xx_PSC_SICR_CLKPOL			(1 << 21)
+#define MPC52xx_PSC_SICR_SYNCPOL		(1 << 20)
+#define MPC52xx_PSC_SICR_CELLSLAVE		(1 << 19)
+#define MPC52xx_PSC_SICR_CELL2XCLK		(1 << 18)
+#define MPC52xx_PSC_SICR_ESAI			(1 << 17)
+#define MPC52xx_PSC_SICR_ENAC97			(1 << 16)
+#define MPC52xx_PSC_SICR_SPI			(1 << 15)
+#define MPC52xx_PSC_SICR_MSTR			(1 << 14)
+#define MPC52xx_PSC_SICR_CPOL			(1 << 13)
+#define MPC52xx_PSC_SICR_CPHA			(1 << 12)
+#define MPC52xx_PSC_SICR_USEEOF			(1 << 11)
+#define MPC52xx_PSC_SICR_DISABLEEOF		(1 << 10)
+
+/* Structure of the hardware registers */
+struct mpc52xx_psc {
+	u8		mode;		/* PSC + 0x00 */
+	u8		reserved0[3];
+	union {				/* PSC + 0x04 */
+		u16	status;
+		u16	clock_select;
+	} sr_csr;
+#define mpc52xx_psc_status	sr_csr.status
+#define mpc52xx_psc_clock_select sr_csr.clock_select
+	u16		reserved1;
+	u8		command;	/* PSC + 0x08 */
+	u8		reserved2[3];
+	union {				/* PSC + 0x0c */
+		u8	buffer_8;
+		u16	buffer_16;
+		u32	buffer_32;
+	} buffer;
+#define mpc52xx_psc_buffer_8	buffer.buffer_8
+#define mpc52xx_psc_buffer_16	buffer.buffer_16
+#define mpc52xx_psc_buffer_32	buffer.buffer_32
+	union {				/* PSC + 0x10 */
+		u8	ipcr;
+		u8	acr;
+	} ipcr_acr;
+#define mpc52xx_psc_ipcr	ipcr_acr.ipcr
+#define mpc52xx_psc_acr		ipcr_acr.acr
+	u8		reserved3[3];
+	union {				/* PSC + 0x14 */
+		u16	isr;
+		u16	imr;
+	} isr_imr;
+#define mpc52xx_psc_isr		isr_imr.isr
+#define mpc52xx_psc_imr		isr_imr.imr
+	u16		reserved4;
+	u8		ctur;		/* PSC + 0x18 */
+	u8		reserved5[3];
+	u8		ctlr;		/* PSC + 0x1c */
+	u8		reserved6[3];
+	/* BitClkDiv field of CCR is byte swapped in
+	 * the hardware for mpc5200/b compatibility */
+	u32		ccr;		/* PSC + 0x20 */
+	u32		ac97_slots;	/* PSC + 0x24 */
+	u32		ac97_cmd;	/* PSC + 0x28 */
+	u32		ac97_data;	/* PSC + 0x2c */
+	u8		ivr;		/* PSC + 0x30 */
+	u8		reserved8[3];
+	u8		ip;		/* PSC + 0x34 */
+	u8		reserved9[3];
+	u8		op1;		/* PSC + 0x38 */
+	u8		reserved10[3];
+	u8		op0;		/* PSC + 0x3c */
+	u8		reserved11[3];
+	u32		sicr;		/* PSC + 0x40 */
+	u8		ircr1;		/* PSC + 0x44 */
+	u8		reserved13[3];
+	u8		ircr2;		/* PSC + 0x44 */
+	u8		reserved14[3];
+	u8		irsdr;		/* PSC + 0x4c */
+	u8		reserved15[3];
+	u8		irmdr;		/* PSC + 0x50 */
+	u8		reserved16[3];
+	u8		irfdr;		/* PSC + 0x54 */
+	u8		reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
+	u16		rfnum;		/* PSC + 0x58 */
+	u16		reserved18;
+	u16		tfnum;		/* PSC + 0x5c */
+	u16		reserved19;
+	u32		rfdata;		/* PSC + 0x60 */
+	u16		rfstat;		/* PSC + 0x64 */
+	u16		reserved20;
+	u8		rfcntl;		/* PSC + 0x68 */
+	u8		reserved21[5];
+	u16		rfalarm;	/* PSC + 0x6e */
+	u16		reserved22;
+	u16		rfrptr;		/* PSC + 0x72 */
+	u16		reserved23;
+	u16		rfwptr;		/* PSC + 0x76 */
+	u16		reserved24;
+	u16		rflrfptr;	/* PSC + 0x7a */
+	u16		reserved25;
+	u16		rflwfptr;	/* PSC + 0x7e */
+	u32		tfdata;		/* PSC + 0x80 */
+	u16		tfstat;		/* PSC + 0x84 */
+	u16		reserved26;
+	u8		tfcntl;		/* PSC + 0x88 */
+	u8		reserved27[5];
+	u16		tfalarm;	/* PSC + 0x8e */
+	u16		reserved28;
+	u16		tfrptr;		/* PSC + 0x92 */
+	u16		reserved29;
+	u16		tfwptr;		/* PSC + 0x96 */
+	u16		reserved30;
+	u16		tflrfptr;	/* PSC + 0x9a */
+	u16		reserved31;
+	u16		tflwfptr;	/* PSC + 0x9e */
+};
+
+#define MPC512x_PSC_FIFO_RESET_SLICE	0x80
+#define MPC512x_PSC_FIFO_ENABLE_SLICE	0x01
+#define MPC512x_PSC_FIFO_ENABLE_DMA	0x04
+
+#define MPC512x_PSC_FIFO_EMPTY		0x1
+#define MPC512x_PSC_FIFO_FULL		0x2
+#define MPC512x_PSC_FIFO_ALARM		0x4
+#define MPC512x_PSC_FIFO_URERR		0x8
+#define MPC512x_PSC_FIFO_ORERR		0x01
+#define MPC512x_PSC_FIFO_MEMERROR	0x02
+
+struct mpc512x_psc_fifo {
+	u32		reserved1[10];
+	u32		txcmd;		/* PSC + 0x80 */
+	u32		txalarm;	/* PSC + 0x84 */
+	u32		txsr;		/* PSC + 0x88 */
+	u32		txisr;		/* PSC + 0x8c */
+	u32		tximr;		/* PSC + 0x90 */
+	u32		txcnt;		/* PSC + 0x94 */
+	u32		txptr;		/* PSC + 0x98 */
+	u32		txsz;		/* PSC + 0x9c */
+	u32		reserved2[7];
+	union {
+		u8	txdata_8;
+		u16	txdata_16;
+		u32	txdata_32;
+	} txdata; 			/* PSC + 0xbc */
+#define txdata_8 txdata.txdata_8
+#define txdata_16 txdata.txdata_16
+#define txdata_32 txdata.txdata_32
+	u32		rxcmd;		/* PSC + 0xc0 */
+	u32		rxalarm;	/* PSC + 0xc4 */
+	u32		rxsr;		/* PSC + 0xc8 */
+	u32		rxisr;		/* PSC + 0xcc */
+	u32		rximr;		/* PSC + 0xd0 */
+	u32		rxcnt;		/* PSC + 0xd4 */
+	u32		rxptr;		/* PSC + 0xd8 */
+	u32		rxsz;		/* PSC + 0xdc */
+	u32		reserved3[7];
+	union {
+		u8	rxdata_8;
+		u16	rxdata_16;
+		u32	rxdata_32;
+	} rxdata; 			/* PSC + 0xfc */
+#define rxdata_8 rxdata.rxdata_8
+#define rxdata_16 rxdata.rxdata_16
+#define rxdata_32 rxdata.rxdata_32
+};
+
+#endif  /* __ASM_MPC52xx_PSC_H__ */
diff --git a/arch/powerpc/include/asm/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h
new file mode 100644
index 00000000000..effc2291beb
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc6xx.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_POWERPC_MPC6xx_H
+#define __ASM_POWERPC_MPC6xx_H
+
+void mpc6xx_enter_standby(void);
+
+#endif
diff --git a/arch/powerpc/include/asm/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h
new file mode 100644
index 00000000000..03317e1e618
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc8260.h
@@ -0,0 +1,25 @@
+/*
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each.  Rather than change every
+ * file that has to include MPC8260 configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_MPC8260_H__
+#define __ASM_POWERPC_MPC8260_H__
+
+#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */
+
+#ifdef CONFIG_8260
+
+#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
+#include <platforms/82xx/pq2ads.h>
+#endif
+
+#ifdef CONFIG_PCI_8260
+#include <platforms/82xx/m82xx_pci.h>
+#endif
+
+#endif /* CONFIG_8260 */
+#endif /* !__ASM_POWERPC_MPC8260_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h
new file mode 100644
index 00000000000..15f650f987e
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc86xx.h
@@ -0,0 +1,33 @@
+/*
+ * MPC86xx definitions
+ *
+ * Author: Jeff Brown
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_MPC86xx_H__
+#define __ASM_POWERPC_MPC86xx_H__
+
+#include <asm/mmu.h>
+
+#ifdef CONFIG_PPC_86xx
+
+#define CPU0_BOOT_RELEASE 0x01000000
+#define CPU1_BOOT_RELEASE 0x02000000
+#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
+#define MCM_PORT_CONFIG_OFFSET 0x1010
+
+/* Offset from CCSRBAR */
+#define MPC86xx_MCM_OFFSET      (0x00000)
+#define MPC86xx_MCM_SIZE        (0x02000)
+
+#endif /* CONFIG_PPC_86xx */
+#endif /* __ASM_POWERPC_MPC86xx_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h
new file mode 100644
index 00000000000..98f3c4f1732
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc8xx.h
@@ -0,0 +1,12 @@
+/* This is the single file included by all MPC8xx build options.
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each.  Rather than change every
+ * file that has to include MPC8xx configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifndef __CONFIG_8xx_DEFS
+#define __CONFIG_8xx_DEFS
+
+extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+
+#endif /* __CONFIG_8xx_DEFS */
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
new file mode 100644
index 00000000000..fe566a348a8
--- /dev/null
+++ b/arch/powerpc/include/asm/mpic.h
@@ -0,0 +1,481 @@
+#ifndef _ASM_POWERPC_MPIC_H
+#define _ASM_POWERPC_MPIC_H
+#ifdef __KERNEL__
+
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+#include <asm/dcr.h>
+
+/*
+ * Global registers
+ */
+
+#define MPIC_GREG_BASE			0x01000
+
+#define MPIC_GREG_FEATURE_0		0x00000
+#define		MPIC_GREG_FEATURE_LAST_SRC_MASK		0x07ff0000
+#define		MPIC_GREG_FEATURE_LAST_SRC_SHIFT	16
+#define		MPIC_GREG_FEATURE_LAST_CPU_MASK		0x00001f00
+#define		MPIC_GREG_FEATURE_LAST_CPU_SHIFT	8
+#define		MPIC_GREG_FEATURE_VERSION_MASK		0xff
+#define MPIC_GREG_FEATURE_1		0x00010
+#define MPIC_GREG_GLOBAL_CONF_0		0x00020
+#define		MPIC_GREG_GCONF_RESET			0x80000000
+#define		MPIC_GREG_GCONF_8259_PTHROU_DIS		0x20000000
+#define		MPIC_GREG_GCONF_NO_BIAS			0x10000000
+#define		MPIC_GREG_GCONF_BASE_MASK		0x000fffff
+#define		MPIC_GREG_GCONF_MCK			0x08000000
+#define MPIC_GREG_GLOBAL_CONF_1		0x00030
+#define		MPIC_GREG_GLOBAL_CONF_1_SIE		0x08000000
+#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK	0x70000000
+#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r)	\
+			(((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK)
+#define MPIC_GREG_VENDOR_0		0x00040
+#define MPIC_GREG_VENDOR_1		0x00050
+#define MPIC_GREG_VENDOR_2		0x00060
+#define MPIC_GREG_VENDOR_3		0x00070
+#define MPIC_GREG_VENDOR_ID		0x00080
+#define 	MPIC_GREG_VENDOR_ID_STEPPING_MASK	0x00ff0000
+#define 	MPIC_GREG_VENDOR_ID_STEPPING_SHIFT	16
+#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
+#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT	8
+#define 	MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
+#define MPIC_GREG_PROCESSOR_INIT	0x00090
+#define MPIC_GREG_IPI_VECTOR_PRI_0	0x000a0
+#define MPIC_GREG_IPI_VECTOR_PRI_1	0x000b0
+#define MPIC_GREG_IPI_VECTOR_PRI_2	0x000c0
+#define MPIC_GREG_IPI_VECTOR_PRI_3	0x000d0
+#define MPIC_GREG_IPI_STRIDE		0x10
+#define MPIC_GREG_SPURIOUS		0x000e0
+#define MPIC_GREG_TIMER_FREQ		0x000f0
+
+/*
+ *
+ * Timer registers
+ */
+#define MPIC_TIMER_BASE			0x01100
+#define MPIC_TIMER_STRIDE		0x40
+
+#define MPIC_TIMER_CURRENT_CNT		0x00000
+#define MPIC_TIMER_BASE_CNT		0x00010
+#define MPIC_TIMER_VECTOR_PRI		0x00020
+#define MPIC_TIMER_DESTINATION		0x00030
+
+/*
+ * Per-Processor registers
+ */
+
+#define MPIC_CPU_THISBASE		0x00000
+#define MPIC_CPU_BASE			0x20000
+#define MPIC_CPU_STRIDE			0x01000
+
+#define MPIC_CPU_IPI_DISPATCH_0		0x00040
+#define MPIC_CPU_IPI_DISPATCH_1		0x00050
+#define MPIC_CPU_IPI_DISPATCH_2		0x00060
+#define MPIC_CPU_IPI_DISPATCH_3		0x00070
+#define MPIC_CPU_IPI_DISPATCH_STRIDE	0x00010
+#define MPIC_CPU_CURRENT_TASK_PRI	0x00080
+#define 	MPIC_CPU_TASKPRI_MASK			0x0000000f
+#define MPIC_CPU_WHOAMI			0x00090
+#define 	MPIC_CPU_WHOAMI_MASK			0x0000001f
+#define MPIC_CPU_INTACK			0x000a0
+#define MPIC_CPU_EOI			0x000b0
+#define MPIC_CPU_MCACK			0x000c0
+
+/*
+ * Per-source registers
+ */
+
+#define MPIC_IRQ_BASE			0x10000
+#define MPIC_IRQ_STRIDE			0x00020
+#define MPIC_IRQ_VECTOR_PRI		0x00000
+#define 	MPIC_VECPRI_MASK			0x80000000
+#define 	MPIC_VECPRI_ACTIVITY			0x40000000	/* Read Only */
+#define 	MPIC_VECPRI_PRIORITY_MASK		0x000f0000
+#define 	MPIC_VECPRI_PRIORITY_SHIFT		16
+#define 	MPIC_VECPRI_VECTOR_MASK			0x000007ff
+#define 	MPIC_VECPRI_POLARITY_POSITIVE		0x00800000
+#define 	MPIC_VECPRI_POLARITY_NEGATIVE		0x00000000
+#define 	MPIC_VECPRI_POLARITY_MASK		0x00800000
+#define 	MPIC_VECPRI_SENSE_LEVEL			0x00400000
+#define 	MPIC_VECPRI_SENSE_EDGE			0x00000000
+#define 	MPIC_VECPRI_SENSE_MASK			0x00400000
+#define MPIC_IRQ_DESTINATION		0x00010
+
+#define MPIC_MAX_IRQ_SOURCES	2048
+#define MPIC_MAX_CPUS		32
+#define MPIC_MAX_ISU		32
+
+/*
+ * Tsi108 implementation of MPIC has many differences from the original one
+ */
+
+/*
+ * Global registers
+ */
+
+#define TSI108_GREG_BASE		0x00000
+#define TSI108_GREG_FEATURE_0		0x00000
+#define TSI108_GREG_GLOBAL_CONF_0	0x00004
+#define TSI108_GREG_VENDOR_ID		0x0000c
+#define TSI108_GREG_IPI_VECTOR_PRI_0	0x00204		/* Doorbell 0 */
+#define TSI108_GREG_IPI_STRIDE		0x0c
+#define TSI108_GREG_SPURIOUS		0x00010
+#define TSI108_GREG_TIMER_FREQ		0x00014
+
+/*
+ * Timer registers
+ */
+#define TSI108_TIMER_BASE		0x0030
+#define TSI108_TIMER_STRIDE		0x10
+#define TSI108_TIMER_CURRENT_CNT	0x00000
+#define TSI108_TIMER_BASE_CNT		0x00004
+#define TSI108_TIMER_VECTOR_PRI		0x00008
+#define TSI108_TIMER_DESTINATION	0x0000c
+
+/*
+ * Per-Processor registers
+ */
+#define TSI108_CPU_BASE			0x00300
+#define TSI108_CPU_STRIDE		0x00040
+#define TSI108_CPU_IPI_DISPATCH_0	0x00200
+#define TSI108_CPU_IPI_DISPATCH_STRIDE	0x00000
+#define TSI108_CPU_CURRENT_TASK_PRI	0x00000
+#define TSI108_CPU_WHOAMI		0xffffffff
+#define TSI108_CPU_INTACK		0x00004
+#define TSI108_CPU_EOI			0x00008
+#define TSI108_CPU_MCACK		0x00004 /* Doesn't really exist here */
+
+/*
+ * Per-source registers
+ */
+#define TSI108_IRQ_BASE			0x00100
+#define TSI108_IRQ_STRIDE		0x00008
+#define TSI108_IRQ_VECTOR_PRI		0x00000
+#define TSI108_VECPRI_VECTOR_MASK	0x000000ff
+#define TSI108_VECPRI_POLARITY_POSITIVE	0x01000000
+#define TSI108_VECPRI_POLARITY_NEGATIVE	0x00000000
+#define TSI108_VECPRI_SENSE_LEVEL	0x02000000
+#define TSI108_VECPRI_SENSE_EDGE	0x00000000
+#define TSI108_VECPRI_POLARITY_MASK	0x01000000
+#define TSI108_VECPRI_SENSE_MASK	0x02000000
+#define TSI108_IRQ_DESTINATION		0x00004
+
+/* weird mpic register indices and mask bits in the HW info array */
+enum {
+	MPIC_IDX_GREG_BASE = 0,
+	MPIC_IDX_GREG_FEATURE_0,
+	MPIC_IDX_GREG_GLOBAL_CONF_0,
+	MPIC_IDX_GREG_VENDOR_ID,
+	MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
+	MPIC_IDX_GREG_IPI_STRIDE,
+	MPIC_IDX_GREG_SPURIOUS,
+	MPIC_IDX_GREG_TIMER_FREQ,
+
+	MPIC_IDX_TIMER_BASE,
+	MPIC_IDX_TIMER_STRIDE,
+	MPIC_IDX_TIMER_CURRENT_CNT,
+	MPIC_IDX_TIMER_BASE_CNT,
+	MPIC_IDX_TIMER_VECTOR_PRI,
+	MPIC_IDX_TIMER_DESTINATION,
+
+	MPIC_IDX_CPU_BASE,
+	MPIC_IDX_CPU_STRIDE,
+	MPIC_IDX_CPU_IPI_DISPATCH_0,
+	MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
+	MPIC_IDX_CPU_CURRENT_TASK_PRI,
+	MPIC_IDX_CPU_WHOAMI,
+	MPIC_IDX_CPU_INTACK,
+	MPIC_IDX_CPU_EOI,
+	MPIC_IDX_CPU_MCACK,
+
+	MPIC_IDX_IRQ_BASE,
+	MPIC_IDX_IRQ_STRIDE,
+	MPIC_IDX_IRQ_VECTOR_PRI,
+
+	MPIC_IDX_VECPRI_VECTOR_MASK,
+	MPIC_IDX_VECPRI_POLARITY_POSITIVE,
+	MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
+	MPIC_IDX_VECPRI_SENSE_LEVEL,
+	MPIC_IDX_VECPRI_SENSE_EDGE,
+	MPIC_IDX_VECPRI_POLARITY_MASK,
+	MPIC_IDX_VECPRI_SENSE_MASK,
+	MPIC_IDX_IRQ_DESTINATION,
+	MPIC_IDX_END
+};
+
+
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+/* Fixup table entry */
+struct mpic_irq_fixup
+{
+	u8 __iomem	*base;
+	u8 __iomem	*applebase;
+	u32		data;
+	unsigned int	index;
+};
+#endif /* CONFIG_MPIC_U3_HT_IRQS */
+
+
+enum mpic_reg_type {
+	mpic_access_mmio_le,
+	mpic_access_mmio_be,
+#ifdef CONFIG_PPC_DCR
+	mpic_access_dcr
+#endif
+};
+
+struct mpic_reg_bank {
+	u32 __iomem	*base;
+#ifdef CONFIG_PPC_DCR
+	dcr_host_t	dhost;
+#endif /* CONFIG_PPC_DCR */
+};
+
+struct mpic_irq_save {
+	u32		vecprio,
+			dest;
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	u32		fixup_data;
+#endif
+};
+
+/* The instance data of a given MPIC */
+struct mpic
+{
+	/* The remapper for this MPIC */
+	struct irq_host		*irqhost;
+
+	/* The "linux" controller struct */
+	struct irq_chip		hc_irq;
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	struct irq_chip		hc_ht_irq;
+#endif
+#ifdef CONFIG_SMP
+	struct irq_chip		hc_ipi;
+#endif
+	const char		*name;
+	/* Flags */
+	unsigned int		flags;
+	/* How many irq sources in a given ISU */
+	unsigned int		isu_size;
+	unsigned int		isu_shift;
+	unsigned int		isu_mask;
+	unsigned int		irq_count;
+	/* Number of sources */
+	unsigned int		num_sources;
+	/* Number of CPUs */
+	unsigned int		num_cpus;
+	/* default senses array */
+	unsigned char		*senses;
+	unsigned int		senses_count;
+
+	/* vector numbers used for internal sources (ipi/timers) */
+	unsigned int		ipi_vecs[4];
+	unsigned int		timer_vecs[4];
+
+	/* Spurious vector to program into unused sources */
+	unsigned int		spurious_vec;
+
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	/* The fixup table */
+	struct mpic_irq_fixup	*fixups;
+	spinlock_t		fixup_lock;
+#endif
+
+	/* Register access method */
+	enum mpic_reg_type	reg_type;
+
+	/* The various ioremap'ed bases */
+	struct mpic_reg_bank	gregs;
+	struct mpic_reg_bank	tmregs;
+	struct mpic_reg_bank	cpuregs[MPIC_MAX_CPUS];
+	struct mpic_reg_bank	isus[MPIC_MAX_ISU];
+
+	/* Protected sources */
+	unsigned long		*protected;
+
+#ifdef CONFIG_MPIC_WEIRD
+	/* Pointer to HW info array */
+	u32			*hw_set;
+#endif
+
+#ifdef CONFIG_PCI_MSI
+	spinlock_t		bitmap_lock;
+	unsigned long		*hwirq_bitmap;
+#endif
+
+#ifdef CONFIG_MPIC_BROKEN_REGREAD
+	u32			isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];
+#endif
+
+	/* link */
+	struct mpic		*next;
+
+	struct sys_device	sysdev;
+
+#ifdef CONFIG_PM
+	struct mpic_irq_save	*save_data;
+#endif
+};
+
+/*
+ * MPIC flags (passed to mpic_alloc)
+ *
+ * The top 4 bits contain an MPIC bhw id that is used to index the
+ * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
+ * Note setting any ID (leaving those bits to 0) means standard MPIC
+ */
+
+/* This is the primary controller, only that one has IPIs and
+ * has afinity control. A non-primary MPIC always uses CPU0
+ * registers only
+ */
+#define MPIC_PRIMARY			0x00000001
+
+/* Set this for a big-endian MPIC */
+#define MPIC_BIG_ENDIAN			0x00000002
+/* Broken U3 MPIC */
+#define MPIC_U3_HT_IRQS			0x00000004
+/* Broken IPI registers (autodetected) */
+#define MPIC_BROKEN_IPI			0x00000008
+/* MPIC wants a reset */
+#define MPIC_WANTS_RESET		0x00000010
+/* Spurious vector requires EOI */
+#define MPIC_SPV_EOI			0x00000020
+/* No passthrough disable */
+#define MPIC_NO_PTHROU_DIS		0x00000040
+/* DCR based MPIC */
+#define MPIC_USES_DCR			0x00000080
+/* MPIC has 11-bit vector fields (or larger) */
+#define MPIC_LARGE_VECTORS		0x00000100
+/* Enable delivery of prio 15 interrupts as MCK instead of EE */
+#define MPIC_ENABLE_MCK			0x00000200
+/* Disable bias among target selection, spread interrupts evenly */
+#define MPIC_NO_BIAS			0x00000400
+/* Ignore NIRQS as reported by FRR */
+#define MPIC_BROKEN_FRR_NIRQS		0x00000800
+
+/* MPIC HW modification ID */
+#define MPIC_REGSET_MASK		0xf0000000
+#define MPIC_REGSET(val)		(((val) & 0xf ) << 28)
+#define MPIC_GET_REGSET(flags)		(((flags) >> 28) & 0xf)
+
+#define	MPIC_REGSET_STANDARD		MPIC_REGSET(0)	/* Original MPIC */
+#define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
+
+/* Allocate the controller structure and setup the linux irq descs
+ * for the range if interrupts passed in. No HW initialization is
+ * actually performed.
+ * 
+ * @phys_addr:	physial base address of the MPIC
+ * @flags:	flags, see constants above
+ * @isu_size:	number of interrupts in an ISU. Use 0 to use a
+ *              standard ISU-less setup (aka powermac)
+ * @irq_offset: first irq number to assign to this mpic
+ * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
+ *	        to match the number of sources
+ * @ipi_offset: first irq number to assign to this mpic IPI sources,
+ *		used only on primary mpic
+ * @senses:	array of sense values
+ * @senses_num: number of entries in the array
+ *
+ * Note about the sense array. If none is passed, all interrupts are
+ * setup to be level negative unless MPIC_U3_HT_IRQS is set in which
+ * case they are edge positive (and the array is ignored anyway).
+ * The values in the array start at the first source of the MPIC,
+ * that is senses[0] correspond to linux irq "irq_offset".
+ */
+extern struct mpic *mpic_alloc(struct device_node *node,
+			       phys_addr_t phys_addr,
+			       unsigned int flags,
+			       unsigned int isu_size,
+			       unsigned int irq_count,
+			       const char *name);
+
+/* Assign ISUs, to call before mpic_init()
+ *
+ * @mpic:	controller structure as returned by mpic_alloc()
+ * @isu_num:	ISU number
+ * @phys_addr:	physical address of the ISU
+ */
+extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
+			    phys_addr_t phys_addr);
+
+/* Set default sense codes
+ *
+ * @mpic:	controller
+ * @senses:	array of sense codes
+ * @count:	size of above array
+ *
+ * Optionally provide an array (indexed on hardware interrupt numbers
+ * for this MPIC) of default sense codes for the chip. Those are linux
+ * sense codes IRQ_TYPE_*
+ *
+ * The driver gets ownership of the pointer, don't dispose of it or
+ * anything like that. __init only.
+ */
+extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
+
+
+/* Initialize the controller. After this has been called, none of the above
+ * should be called again for this mpic
+ */
+extern void mpic_init(struct mpic *mpic);
+
+/*
+ * All of the following functions must only be used after the
+ * ISUs have been assigned and the controller fully initialized
+ * with mpic_init()
+ */
+
+
+/* Change the priority of an interrupt. Default is 8 for irqs and
+ * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
+ * IPI number is then the offset'ed (linux irq number mapped to the IPI)
+ */
+extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
+
+/* Setup a non-boot CPU */
+extern void mpic_setup_this_cpu(void);
+
+/* Clean up for kexec (or cpu offline or ...) */
+extern void mpic_teardown_this_cpu(int secondary);
+
+/* Get the current cpu priority for this cpu (0..15) */
+extern int mpic_cpu_get_priority(void);
+
+/* Set the current cpu priority for this cpu */
+extern void mpic_cpu_set_priority(int prio);
+
+/* Request IPIs on primary mpic */
+extern void mpic_request_ipis(void);
+
+/* Send an IPI (non offseted number 0..3) */
+extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
+
+/* Send a message (IPI) to a given target (cpu number or MSG_*) */
+void smp_mpic_message_pass(int target, int msg);
+
+/* Unmask a specific virq */
+extern void mpic_unmask_irq(unsigned int irq);
+/* Mask a specific virq */
+extern void mpic_mask_irq(unsigned int irq);
+/* EOI a specific virq */
+extern void mpic_end_irq(unsigned int irq);
+
+/* Fetch interrupt from a given mpic */
+extern unsigned int mpic_get_one_irq(struct mpic *mpic);
+/* This one gets from the primary mpic */
+extern unsigned int mpic_get_irq(void);
+/* Fetch Machine Check interrupt from primary mpic */
+extern unsigned int mpic_get_mcirq(void);
+
+/* Set the EPIC clock ratio */
+void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
+
+/* Enable/Disable EPIC serial interrupt mode */
+void mpic_set_serial_int(struct mpic *mpic, int enable);
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MPIC_H */
diff --git a/arch/powerpc/include/asm/msgbuf.h b/arch/powerpc/include/asm/msgbuf.h
new file mode 100644
index 00000000000..dd76743c753
--- /dev/null
+++ b/arch/powerpc/include/asm/msgbuf.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_POWERPC_MSGBUF_H
+#define _ASM_POWERPC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for the PowerPC architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#ifndef __powerpc64__
+	unsigned int	__unused1;
+#endif
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifndef __powerpc64__
+	unsigned int	__unused2;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifndef __powerpc64__
+	unsigned int	__unused3;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif	/* _ASM_POWERPC_MSGBUF_H */
diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/powerpc/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h
new file mode 100644
index 00000000000..efde5ac82f7
--- /dev/null
+++ b/arch/powerpc/include/asm/nvram.h
@@ -0,0 +1,139 @@
+/*
+ * NVRAM definitions and access functions.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_NVRAM_H
+#define _ASM_POWERPC_NVRAM_H
+
+#include <linux/errno.h>
+
+#define NVRW_CNT 0x20
+#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */
+#define NVRAM_BLOCK_LEN 16
+#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN)
+#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN)
+
+#define NVRAM_AS0  0x74
+#define NVRAM_AS1  0x75
+#define NVRAM_DATA 0x77
+
+
+/* RTC Offsets */
+
+#define MOTO_RTC_SECONDS	0x1FF9
+#define MOTO_RTC_MINUTES	0x1FFA
+#define MOTO_RTC_HOURS		0x1FFB
+#define MOTO_RTC_DAY_OF_WEEK	0x1FFC
+#define MOTO_RTC_DAY_OF_MONTH	0x1FFD
+#define MOTO_RTC_MONTH		0x1FFE
+#define MOTO_RTC_YEAR		0x1FFF
+#define MOTO_RTC_CONTROLA       0x1FF8
+#define MOTO_RTC_CONTROLB       0x1FF9
+
+#define NVRAM_SIG_SP	0x02	/* support processor */
+#define NVRAM_SIG_OF	0x50	/* open firmware config */
+#define NVRAM_SIG_FW	0x51	/* general firmware */
+#define NVRAM_SIG_HW	0x52	/* hardware (VPD) */
+#define NVRAM_SIG_FLIP	0x5a	/* Apple flip/flop header */
+#define NVRAM_SIG_APPL	0x5f	/* Apple "system" (???) */
+#define NVRAM_SIG_SYS	0x70	/* system env vars */
+#define NVRAM_SIG_CFG	0x71	/* config data */
+#define NVRAM_SIG_ELOG	0x72	/* error log */
+#define NVRAM_SIG_VEND	0x7e	/* vendor defined */
+#define NVRAM_SIG_FREE	0x7f	/* Free space */
+#define NVRAM_SIG_OS	0xa0	/* OS defined */
+#define NVRAM_SIG_PANIC	0xa1	/* Apple OSX "panic" */
+
+/* If change this size, then change the size of NVNAME_LEN */
+struct nvram_header {
+	unsigned char signature;
+	unsigned char checksum;
+	unsigned short length;
+	char name[12];
+};
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+
+struct nvram_partition {
+	struct list_head partition;
+	struct nvram_header header;
+	unsigned int index;
+};
+
+
+extern int nvram_write_error_log(char * buff, int length,
+					 unsigned int err_type, unsigned int err_seq);
+extern int nvram_read_error_log(char * buff, int length,
+					 unsigned int * err_type, unsigned int *err_seq);
+extern int nvram_clear_error_log(void);
+extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
+
+extern int pSeries_nvram_init(void);
+
+#ifdef CONFIG_MMIO_NVRAM
+extern int mmio_nvram_init(void);
+#else
+static inline int mmio_nvram_init(void)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+/* PowerMac specific nvram stuffs */
+
+enum {
+	pmac_nvram_OF,		/* Open Firmware partition */
+	pmac_nvram_XPRAM,	/* MacOS XPRAM partition */
+	pmac_nvram_NR		/* MacOS Name Registry partition */
+};
+
+#ifdef __KERNEL__
+/* Return partition offset in nvram */
+extern int	pmac_get_partition(int partition);
+
+/* Direct access to XPRAM on PowerMacs */
+extern u8	pmac_xpram_read(int xpaddr);
+extern void	pmac_xpram_write(int xpaddr, u8 data);
+
+/* Synchronize NVRAM */
+extern void	nvram_sync(void);
+
+/* Normal access to NVRAM */
+extern unsigned char nvram_read_byte(int i);
+extern void nvram_write_byte(unsigned char c, int i);
+#endif
+
+/* Some offsets in XPRAM */
+#define PMAC_XPRAM_MACHINE_LOC	0xe4
+#define PMAC_XPRAM_SOUND_VOLUME	0x08
+
+/* Machine location structure in PowerMac XPRAM */
+struct pmac_machine_location {
+	unsigned int	latitude;	/* 2+30 bit Fractional number */
+	unsigned int	longitude;	/* 2+30 bit Fractional number */
+	unsigned int	delta;		/* mix of GMT delta and DLS */
+};
+
+/*
+ * /dev/nvram ioctls
+ *
+ * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
+ * definitely obsolete. Do not use it if you can avoid it
+ */
+
+#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
+				_IOWR('p', 0x40, int)
+
+#define IOC_NVRAM_GET_OFFSET	_IOWR('p', 0x42, int)	/* Get NVRAM partition offset */
+#define IOC_NVRAM_SYNC		_IO('p', 0x43)		/* Sync NVRAM image */
+
+#endif /* _ASM_POWERPC_NVRAM_H */
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
new file mode 100644
index 00000000000..3c123990ca2
--- /dev/null
+++ b/arch/powerpc/include/asm/of_device.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_POWERPC_OF_DEVICE_H
+#define _ASM_POWERPC_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device
+{
+	struct device_node	*node;		/* to be obsoleted */
+	u64			dma_mask;	/* DMA mask */
+	struct device		dev;		/* Generic device interface */
+};
+
+extern struct of_device *of_device_alloc(struct device_node *np,
+					 const char *bus_id,
+					 struct device *parent);
+
+extern int of_device_uevent(struct device *dev,
+			    struct kobj_uevent_env *env);
+
+/* This is just here during the transition */
+#include <linux/of_device.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h
new file mode 100644
index 00000000000..18659ef7213
--- /dev/null
+++ b/arch/powerpc/include/asm/of_platform.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_POWERPC_OF_PLATFORM_H
+#define _ASM_POWERPC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+	return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+	of_unregister_driver(drv);
+}
+
+/* Platform devices and busses creation */
+extern struct of_device *of_platform_device_create(struct device_node *np,
+						   const char *bus_id,
+						   struct device *parent);
+/* pseudo "matches" value to not do deep probe */
+#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
+
+extern int of_platform_bus_probe(struct device_node *root,
+				 const struct of_device_id *matches,
+				 struct device *parent);
+
+extern struct of_device *of_find_device_by_phandle(phandle ph);
+
+extern void of_instantiate_rtc(void);
+
+#endif	/* _ASM_POWERPC_OF_PLATFORM_H */
diff --git a/arch/powerpc/include/asm/ohare.h b/arch/powerpc/include/asm/ohare.h
new file mode 100644
index 00000000000..0d030f9dea2
--- /dev/null
+++ b/arch/powerpc/include/asm/ohare.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_POWERPC_OHARE_H
+#define _ASM_POWERPC_OHARE_H
+#ifdef __KERNEL__
+/*
+ * ohare.h: definitions for using the "O'Hare" I/O controller chip.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ *
+ * BenH: Changed to match those of heathrow (but not all of them). Please
+ *       check if I didn't break anything (especially the media bay).
+ */
+
+/* offset from ohare base for feature control register */
+#define OHARE_MBCR	0x34
+#define OHARE_FCR	0x38
+
+/*
+ * Bits in feature control register.
+ * These were mostly derived by experiment on a powerbook 3400
+ * and may differ for other machines.
+ */
+#define OH_SCC_RESET		1
+#define OH_BAY_POWER_N		2	/* a guess */
+#define OH_BAY_PCI_ENABLE	4	/* a guess */
+#define OH_BAY_IDE_ENABLE	8
+#define OH_BAY_FLOPPY_ENABLE	0x10
+#define OH_IDE0_ENABLE		0x20
+#define OH_IDE0_RESET_N		0x40	/* a guess */
+#define OH_BAY_DEV_MASK		0x1c
+#define OH_BAY_RESET_N		0x80
+#define OH_IOBUS_ENABLE		0x100	/* IOBUS seems to be IDE */
+#define OH_SCC_ENABLE		0x200
+#define OH_MESH_ENABLE		0x400
+#define OH_FLOPPY_ENABLE	0x800
+#define OH_SCCA_IO		0x4000
+#define OH_SCCB_IO		0x8000
+#define OH_VIA_ENABLE		0x10000	/* Is apparently wrong, to be verified */
+#define OH_IDE1_RESET_N		0x800000
+
+/*
+ * Bits to set in the feature control register on PowerBooks.
+ */
+#define PBOOK_FEATURES		(OH_IDE_ENABLE | OH_SCC_ENABLE | \
+				 OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
+
+/*
+ * A magic value to put into the feature control register of the
+ * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
+ * Contributed by Harry Eaton.
+ */
+#define STARMAX_FEATURES	0xbeff7a
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OHARE_H */
diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h
new file mode 100644
index 00000000000..95035c602ba
--- /dev/null
+++ b/arch/powerpc/include/asm/oprofile_impl.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Based on alpha version.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
+#define _ASM_POWERPC_OPROFILE_IMPL_H
+#ifdef __KERNEL__
+
+#define OP_MAX_COUNTER 8
+
+/* Per-counter configuration as set via oprofilefs.  */
+struct op_counter_config {
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long count;
+	/* Classic doesn't support per-counter user/kernel selection */
+	unsigned long kernel;
+	unsigned long user;
+	unsigned long unit_mask;
+};
+
+/* System-wide configuration as set via oprofilefs.  */
+struct op_system_config {
+#ifdef CONFIG_PPC64
+	unsigned long mmcr0;
+	unsigned long mmcr1;
+	unsigned long mmcra;
+#endif
+	unsigned long enable_kernel;
+	unsigned long enable_user;
+};
+
+/* Per-arch configuration */
+struct op_powerpc_model {
+	int (*reg_setup) (struct op_counter_config *,
+			   struct op_system_config *,
+			   int num_counters);
+	int  (*cpu_setup) (struct op_counter_config *);
+	int  (*start) (struct op_counter_config *);
+	int  (*global_start) (struct op_counter_config *);
+	void (*stop) (void);
+	void (*global_stop) (void);
+	int (*sync_start)(void);
+	int (*sync_stop)(void);
+	void (*handle_interrupt) (struct pt_regs *,
+				  struct op_counter_config *);
+	int num_counters;
+};
+
+extern struct op_powerpc_model op_model_fsl_emb;
+extern struct op_powerpc_model op_model_rs64;
+extern struct op_powerpc_model op_model_power4;
+extern struct op_powerpc_model op_model_7450;
+extern struct op_powerpc_model op_model_cell;
+extern struct op_powerpc_model op_model_pa6t;
+
+
+/* All the classic PPC parts use these */
+static inline unsigned int classic_ctr_read(unsigned int i)
+{
+	switch(i) {
+	case 0:
+		return mfspr(SPRN_PMC1);
+	case 1:
+		return mfspr(SPRN_PMC2);
+	case 2:
+		return mfspr(SPRN_PMC3);
+	case 3:
+		return mfspr(SPRN_PMC4);
+	case 4:
+		return mfspr(SPRN_PMC5);
+	case 5:
+		return mfspr(SPRN_PMC6);
+
+/* No PPC32 chip has more than 6 so far */
+#ifdef CONFIG_PPC64
+	case 6:
+		return mfspr(SPRN_PMC7);
+	case 7:
+		return mfspr(SPRN_PMC8);
+#endif
+	default:
+		return 0;
+	}
+}
+
+static inline void classic_ctr_write(unsigned int i, unsigned int val)
+{
+	switch(i) {
+	case 0:
+		mtspr(SPRN_PMC1, val);
+		break;
+	case 1:
+		mtspr(SPRN_PMC2, val);
+		break;
+	case 2:
+		mtspr(SPRN_PMC3, val);
+		break;
+	case 3:
+		mtspr(SPRN_PMC4, val);
+		break;
+	case 4:
+		mtspr(SPRN_PMC5, val);
+		break;
+	case 5:
+		mtspr(SPRN_PMC6, val);
+		break;
+
+/* No PPC32 chip has more than 6, yet */
+#ifdef CONFIG_PPC64
+	case 6:
+		mtspr(SPRN_PMC7, val);
+		break;
+	case 7:
+		mtspr(SPRN_PMC8, val);
+		break;
+#endif
+	default:
+		break;
+	}
+}
+
+
+extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
new file mode 100644
index 00000000000..e482e5352e6
--- /dev/null
+++ b/arch/powerpc/include/asm/pSeries_reconfig.h
@@ -0,0 +1,29 @@
+#ifndef _PPC64_PSERIES_RECONFIG_H
+#define _PPC64_PSERIES_RECONFIG_H
+#ifdef __KERNEL__
+
+#include <linux/notifier.h>
+
+/*
+ * Use this API if your code needs to know about OF device nodes being
+ * added or removed on pSeries systems.
+ */
+
+#define PSERIES_RECONFIG_ADD		0x0001
+#define PSERIES_RECONFIG_REMOVE		0x0002
+#define PSERIES_DRCONF_MEM_ADD		0x0003
+#define PSERIES_DRCONF_MEM_REMOVE	0x0004
+
+#ifdef CONFIG_PPC_PSERIES
+extern int pSeries_reconfig_notifier_register(struct notifier_block *);
+extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
+#else /* !CONFIG_PPC_PSERIES */
+static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+#endif /* CONFIG_PPC_PSERIES */
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
new file mode 100644
index 00000000000..6493a395508
--- /dev/null
+++ b/arch/powerpc/include/asm/paca.h
@@ -0,0 +1,112 @@
+/*
+ * This control block defines the PACA which defines the processor
+ * specific data for each logical processor on the system.
+ * There are some pointers defined that are utilized by PLIC.
+ *
+ * C 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PACA_H
+#define _ASM_POWERPC_PACA_H
+#ifdef __KERNEL__
+
+#include	<asm/types.h>
+#include	<asm/lppaca.h>
+#include	<asm/mmu.h>
+
+register struct paca_struct *local_paca asm("r13");
+
+#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP)
+extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
+/*
+ * Add standard checks that preemption cannot occur when using get_paca():
+ * otherwise the paca_struct it points to may be the wrong one just after.
+ */
+#define get_paca()	((void) debug_smp_processor_id(), local_paca)
+#else
+#define get_paca()	local_paca
+#endif
+
+#define get_lppaca()	(get_paca()->lppaca_ptr)
+#define get_slb_shadow()	(get_paca()->slb_shadow_ptr)
+
+struct task_struct;
+
+/*
+ * Defines the layout of the paca.
+ *
+ * This structure is not directly accessed by firmware or the service
+ * processor.
+ */
+struct paca_struct {
+	/*
+	 * Because hw_cpu_id, unlike other paca fields, is accessed
+	 * routinely from other CPUs (from the IRQ code), we stick to
+	 * read-only (after boot) fields in the first cacheline to
+	 * avoid cacheline bouncing.
+	 */
+
+	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+
+	/*
+	 * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c 
+	 * load lock_token and paca_index with a single lwz
+	 * instruction.  They must travel together and be properly
+	 * aligned.
+	 */
+	u16 lock_token;			/* Constant 0x8000, used in locks */
+	u16 paca_index;			/* Logical processor number */
+
+	u64 kernel_toc;			/* Kernel TOC address */
+	u64 stab_real;			/* Absolute address of segment table */
+	u64 stab_addr;			/* Virtual address of segment table */
+	void *emergency_sp;		/* pointer to emergency stack */
+	u64 data_offset;		/* per cpu data offset */
+	s16 hw_cpu_id;			/* Physical processor number */
+	u8 cpu_start;			/* At startup, processor spins until */
+					/* this becomes non-zero. */
+	struct slb_shadow *slb_shadow_ptr;
+
+	/*
+	 * Now, starting in cacheline 2, the exception save areas
+	 */
+	/* used for most interrupts/exceptions */
+	u64 exgen[10] __attribute__((aligned(0x80)));
+	u64 exmc[10];		/* used for machine checks */
+	u64 exslb[10];		/* used for SLB/segment table misses
+ 				 * on the linear mapping */
+
+	mm_context_t context;
+	u16 vmalloc_sllp;
+	u16 slb_cache_ptr;
+	u16 slb_cache[SLB_CACHE_ENTRIES];
+
+	/*
+	 * then miscellaneous read-write fields
+	 */
+	struct task_struct *__current;	/* Pointer to current */
+	u64 kstack;			/* Saved Kernel stack addr */
+	u64 stab_rr;			/* stab/slb round-robin counter */
+	u64 saved_r1;			/* r1 save for RTAS calls */
+	u64 saved_msr;			/* MSR saved here by enter_rtas */
+	u16 trap_save;			/* Used when bad stack is encountered */
+	u8 soft_enabled;		/* irq soft-enable flag */
+	u8 hard_enabled;		/* set if irqs are enabled in MSR */
+	u8 io_sync;			/* writel() needs spin_unlock sync */
+
+	/* Stuff for accurate time accounting */
+	u64 user_time;			/* accumulated usermode TB ticks */
+	u64 system_time;		/* accumulated system TB ticks */
+	u64 startpurr;			/* PURR/TB value snapshot */
+	u64 startspurr;			/* SPURR value snapshot */
+};
+
+extern struct paca_struct paca[];
+extern void initialise_pacas(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PACA_H */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
new file mode 100644
index 00000000000..e088545cb3f
--- /dev/null
+++ b/arch/powerpc/include/asm/page.h
@@ -0,0 +1,225 @@
+#ifndef _ASM_POWERPC_PAGE_H
+#define _ASM_POWERPC_PAGE_H
+
+/*
+ * Copyright (C) 2001,2005 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-compat.h>
+#include <asm/kdump.h>
+#include <asm/types.h>
+
+/*
+ * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
+ * page size. When using 64K pages however, whether we are really supporting
+ * 64K pages in HW or not is irrelevant to those definitions.
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+#define PAGE_SHIFT		16
+#else
+#define PAGE_SHIFT		12
+#endif
+
+#define PAGE_SIZE		(ASM_CONST(1) << PAGE_SHIFT)
+
+/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
+#define __HAVE_ARCH_GATE_AREA		1
+
+/*
+ * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we
+ * assign PAGE_MASK to a larger type it gets extended the way we want
+ * (i.e. with 1s in the high bits)
+ */
+#define PAGE_MASK      (~((1 << PAGE_SHIFT) - 1))
+
+/*
+ * KERNELBASE is the virtual address of the start of the kernel, it's often
+ * the same as PAGE_OFFSET, but _might not be_.
+ *
+ * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
+ *
+ * PAGE_OFFSET is the virtual address of the start of lowmem.
+ *
+ * PHYSICAL_START is the physical address of the start of the kernel.
+ *
+ * MEMORY_START is the physical address of the start of lowmem.
+ *
+ * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on
+ * ppc32 and based on how they are set we determine MEMORY_START.
+ *
+ * For the linear mapping the following equation should be true:
+ * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START
+ *
+ * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
+ *
+ * There are two was to determine a physical address from a virtual one:
+ * va = pa + PAGE_OFFSET - MEMORY_START
+ * va = pa + KERNELBASE - PHYSICAL_START
+ *
+ * If you want to know something's offset from the start of the kernel you
+ * should subtract KERNELBASE.
+ *
+ * If you want to test if something's a kernel address, use is_kernel_addr().
+ */
+
+#define KERNELBASE      ASM_CONST(CONFIG_KERNEL_START)
+#define PAGE_OFFSET	ASM_CONST(CONFIG_PAGE_OFFSET)
+#define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
+
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
+#ifndef __ASSEMBLY__
+extern phys_addr_t memstart_addr;
+extern phys_addr_t kernstart_addr;
+#endif
+#define PHYSICAL_START	kernstart_addr
+#define MEMORY_START	memstart_addr
+#else
+#define PHYSICAL_START	ASM_CONST(CONFIG_PHYSICAL_START)
+#define MEMORY_START	(PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
+#endif
+
+#ifdef CONFIG_FLATMEM
+#define ARCH_PFN_OFFSET		(MEMORY_START >> PAGE_SHIFT)
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
+#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+
+/*
+ * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
+ * and needs to be executable.  This means the whole heap ends
+ * up being executable.
+ */
+#define VM_DATA_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_DATA_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifdef __powerpc64__
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr,size)	((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
+
+/*
+ * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
+ * "kernelness", use is_kernel_addr() - it should do what you want.
+ */
+#define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
+
+#ifndef __ASSEMBLY__
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking. */
+
+/* PTE level */
+typedef struct { pte_basic_t pte; } pte_t;
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) })
+
+/* 64k pages additionally define a bigger "real PTE" type that gathers
+ * the "second half" part of the PTE for pseudo 64k pages
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+#else
+typedef struct { pte_t pte; } real_pte_t;
+#endif
+
+/* PMD level */
+#ifdef CONFIG_PPC64
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) })
+
+/* PUD level exusts only on 4k pages */
+#ifndef CONFIG_PPC_64K_PAGES
+typedef struct { unsigned long pud; } pud_t;
+#define pud_val(x)	((x).pud)
+#define __pud(x)	((pud_t) { (x) })
+#endif /* !CONFIG_PPC_64K_PAGES */
+#endif /* CONFIG_PPC64 */
+
+/* PGD level */
+typedef struct { unsigned long pgd; } pgd_t;
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) })
+
+/* Page protection bits */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) })
+
+#else
+
+/*
+ * .. while these make it easier on the compiler
+ */
+
+typedef pte_basic_t pte_t;
+#define pte_val(x)	(x)
+#define __pte(x)	(x)
+
+#ifdef CONFIG_PPC_64K_PAGES
+typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+#else
+typedef unsigned long real_pte_t;
+#endif
+
+
+#ifdef CONFIG_PPC64
+typedef unsigned long pmd_t;
+#define pmd_val(x)	(x)
+#define __pmd(x)	(x)
+
+#ifndef CONFIG_PPC_64K_PAGES
+typedef unsigned long pud_t;
+#define pud_val(x)	(x)
+#define __pud(x)	(x)
+#endif /* !CONFIG_PPC_64K_PAGES */
+#endif /* CONFIG_PPC64 */
+
+typedef unsigned long pgd_t;
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+typedef unsigned long pgprot_t;
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif
+
+struct page;
+extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long vaddr,
+		struct page *p);
+extern int page_is_ram(unsigned long pfn);
+
+struct vm_area_struct;
+
+typedef struct page *pgtable_t;
+
+#include <asm-generic/memory_model.h>
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PAGE_H */
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
new file mode 100644
index 00000000000..ebfae530a37
--- /dev/null
+++ b/arch/powerpc/include/asm/page_32.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_POWERPC_PAGE_32_H
+#define _ASM_POWERPC_PAGE_32_H
+
+#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
+#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
+#endif
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_DEFAULT_FLAGS32
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
+ * physical addressing.  For now this just the IBM PPC440.
+ */
+#ifdef CONFIG_PTE_64BIT
+typedef unsigned long long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 3)	/* 512 ptes per page */
+#else
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+#endif
+
+struct page;
+extern void clear_pages(void *page, int order);
+static inline void clear_page(void *page) { clear_pages(page, 0); }
+extern void copy_page(void *to, void *from);
+
+#include <asm-generic/page.h>
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PAGE_32_H */
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
new file mode 100644
index 00000000000..043bfdfe4f7
--- /dev/null
+++ b/arch/powerpc/include/asm/page_64.h
@@ -0,0 +1,185 @@
+#ifndef _ASM_POWERPC_PAGE_64_H
+#define _ASM_POWERPC_PAGE_64_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux
+ * specific, every notion of page number shared with the firmware, TCEs,
+ * iommu, etc... still uses a page size of 4K.
+ */
+#define HW_PAGE_SHIFT		12
+#define HW_PAGE_SIZE		(ASM_CONST(1) << HW_PAGE_SHIFT)
+#define HW_PAGE_MASK		(~(HW_PAGE_SIZE-1))
+
+/*
+ * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and
+ * HW_PAGE_SHIFT, that is 4K pages.
+ */
+#define PAGE_FACTOR		(PAGE_SHIFT - HW_PAGE_SHIFT)
+
+/* Segment size; normal 256M segments */
+#define SID_SHIFT		28
+#define SID_MASK		ASM_CONST(0xfffffffff)
+#define ESID_MASK		0xfffffffff0000000UL
+#define GET_ESID(x)		(((x) >> SID_SHIFT) & SID_MASK)
+
+/* 1T segments */
+#define SID_SHIFT_1T		40
+#define SID_MASK_1T		0xffffffUL
+#define ESID_MASK_1T		0xffffff0000000000UL
+#define GET_ESID_1T(x)		(((x) >> SID_SHIFT_1T) & SID_MASK_1T)
+
+#ifndef __ASSEMBLY__
+#include <asm/cache.h>
+
+typedef unsigned long pte_basic_t;
+
+static __inline__ void clear_page(void *addr)
+{
+	unsigned long lines, line_size;
+
+	line_size = ppc64_caches.dline_size;
+	lines = ppc64_caches.dlines_per_page;
+
+	__asm__ __volatile__(
+	"mtctr	%1	# clear_page\n\
+1:      dcbz	0,%0\n\
+	add	%0,%0,%3\n\
+	bdnz+	1b"
+        : "=r" (addr)
+        : "r" (lines), "0" (addr), "r" (line_size)
+	: "ctr", "memory");
+}
+
+extern void copy_4K_page(void *to, void *from);
+
+#ifdef CONFIG_PPC_64K_PAGES
+static inline void copy_page(void *to, void *from)
+{
+	unsigned int i;
+	for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) {
+		copy_4K_page(to, from);
+		to += 4096;
+		from += 4096;
+	}
+}
+#else /* CONFIG_PPC_64K_PAGES */
+static inline void copy_page(void *to, void *from)
+{
+	copy_4K_page(to, from);
+}
+#endif /* CONFIG_PPC_64K_PAGES */
+
+/* Log 2 of page table size */
+extern u64 ppc64_pft_size;
+
+/* Large pages size */
+#ifdef CONFIG_HUGETLB_PAGE
+extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
+#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HUGE_MAX_HSTATE		3
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PPC_MM_SLICES
+
+#define SLICE_LOW_SHIFT		28
+#define SLICE_HIGH_SHIFT	40
+
+#define SLICE_LOW_TOP		(0x100000000ul)
+#define SLICE_NUM_LOW		(SLICE_LOW_TOP >> SLICE_LOW_SHIFT)
+#define SLICE_NUM_HIGH		(PGTABLE_RANGE >> SLICE_HIGH_SHIFT)
+
+#define GET_LOW_SLICE_INDEX(addr)	((addr) >> SLICE_LOW_SHIFT)
+#define GET_HIGH_SLICE_INDEX(addr)	((addr) >> SLICE_HIGH_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+struct slice_mask {
+	u16 low_slices;
+	u16 high_slices;
+};
+
+struct mm_struct;
+
+extern unsigned long slice_get_unmapped_area(unsigned long addr,
+					     unsigned long len,
+					     unsigned long flags,
+					     unsigned int psize,
+					     int topdown,
+					     int use_cache);
+
+extern unsigned int get_slice_psize(struct mm_struct *mm,
+				    unsigned long addr);
+
+extern void slice_init_context(struct mm_struct *mm, unsigned int psize);
+extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
+extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
+				  unsigned long len, unsigned int psize);
+
+#define slice_mm_new_context(mm)	((mm)->context.id == 0)
+
+#endif /* __ASSEMBLY__ */
+#else
+#define slice_init()
+#define get_slice_psize(mm, addr)	((mm)->context.user_psize)
+#define slice_set_user_psize(mm, psize)		\
+do {						\
+	(mm)->context.user_psize = (psize);	\
+	(mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
+} while (0)
+#define slice_set_range_psize(mm, start, len, psize)	\
+	slice_set_user_psize((mm), (psize))
+#define slice_mm_new_context(mm)	1
+#endif /* CONFIG_PPC_MM_SLICES */
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+
+#endif /* !CONFIG_HUGETLB_PAGE */
+
+#ifdef MODULE
+#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
+#else
+#define __page_aligned \
+	__attribute__((__aligned__(PAGE_SIZE), \
+		__section__(".data.page_aligned")))
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_32BIT) ? \
+	 VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
+
+/*
+ * This is the default if a program doesn't have a PT_GNU_STACK
+ * program header entry. The PPC64 ELF ABI has a non executable stack
+ * stack by default, so in the absense of a PT_GNU_STACK program header
+ * we turn execute permission off.
+ */
+#define VM_STACK_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_STACK_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_STACK_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_32BIT) ? \
+	 VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64)
+
+#include <asm-generic/page.h>
+
+#endif /* _ASM_POWERPC_PAGE_64_H */
diff --git a/arch/powerpc/include/asm/param.h b/arch/powerpc/include/asm/param.h
new file mode 100644
index 00000000000..094f63d4d5c
--- /dev/null
+++ b/arch/powerpc/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_POWERPC_PARAM_H
+#define _ASM_POWERPC_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
+#define USER_HZ		100		/* for user interfaces in "ticks" */
+#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif /* __KERNEL__ */
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif	/* _ASM_POWERPC_PARAM_H */
diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h
new file mode 100644
index 00000000000..414c50e2e88
--- /dev/null
+++ b/arch/powerpc/include/asm/parport.h
@@ -0,0 +1,39 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_POWERPC_PARPORT_H
+#define _ASM_POWERPC_PARPORT_H
+#ifdef __KERNEL__
+
+#include <asm/prom.h>
+
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	struct device_node *np;
+	const u32 *prop;
+	u32 io1, io2;
+	int propsize;
+	int count = 0;
+	for (np = NULL; (np = of_find_compatible_node(np,
+						      "parallel",
+						      "pnpPNP,400")) != NULL;) {
+		prop = of_get_property(np, "reg", &propsize);
+		if (!prop || propsize > 6*sizeof(u32))
+			continue;
+		io1 = prop[1]; io2 = prop[2];
+		prop = of_get_property(np, "interrupts", NULL);
+		if (!prop)
+			continue;
+		if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
+			count++;
+	}
+	return count;
+}
+
+#endif /* __KERNEL__ */
+#endif /* !(_ASM_POWERPC_PARPORT_H) */
diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h
new file mode 100644
index 00000000000..19fd7933e2d
--- /dev/null
+++ b/arch/powerpc/include/asm/pasemi_dma.h
@@ -0,0 +1,538 @@
+/*
+ * Copyright (C) 2006-2008 PA Semi, Inc
+ *
+ * Hardware register layout and descriptor formats for the on-board
+ * DMA engine on PA Semi PWRficient. Used by ethernet, function and security
+ * drivers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef ASM_PASEMI_DMA_H
+#define ASM_PASEMI_DMA_H
+
+/* status register layout in IOB region, at 0xfb800000 */
+struct pasdma_status {
+	u64 rx_sta[64];		/* RX channel status */
+	u64 tx_sta[20];		/* TX channel status */
+};
+
+
+/* All these registers live in the PCI configuration space for the DMA PCI
+ * device. Use the normal PCI config access functions for them.
+ */
+enum {
+	PAS_DMA_CAP_TXCH  = 0x44,	/* Transmit Channel Info      */
+	PAS_DMA_CAP_RXCH  = 0x48,	/* Transmit Channel Info      */
+	PAS_DMA_CAP_IFI	  = 0x4c,	/* Interface Info	      */
+	PAS_DMA_COM_TXCMD = 0x100,	/* Transmit Command Register  */
+	PAS_DMA_COM_TXSTA = 0x104,	/* Transmit Status Register   */
+	PAS_DMA_COM_RXCMD = 0x108,	/* Receive Command Register   */
+	PAS_DMA_COM_RXSTA = 0x10c,	/* Receive Status Register    */
+	PAS_DMA_COM_CFG   = 0x114,	/* Common config reg	      */
+	PAS_DMA_TXF_SFLG0 = 0x140,	/* Set flags                  */
+	PAS_DMA_TXF_SFLG1 = 0x144,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG0 = 0x148,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG1 = 0x14c,	/* Set flags                  */
+};
+
+
+#define PAS_DMA_CAP_TXCH_TCHN_M	0x00ff0000 /* # of TX channels */
+#define PAS_DMA_CAP_TXCH_TCHN_S	16
+
+#define PAS_DMA_CAP_RXCH_RCHN_M	0x00ff0000 /* # of RX channels */
+#define PAS_DMA_CAP_RXCH_RCHN_S	16
+
+#define PAS_DMA_CAP_IFI_IOFF_M	0xff000000 /* Cfg reg for intf pointers */
+#define PAS_DMA_CAP_IFI_IOFF_S	24
+#define PAS_DMA_CAP_IFI_NIN_M	0x00ff0000 /* # of interfaces */
+#define PAS_DMA_CAP_IFI_NIN_S	16
+
+#define PAS_DMA_COM_TXCMD_EN	0x00000001 /* enable */
+#define PAS_DMA_COM_TXSTA_ACT	0x00000001 /* active */
+#define PAS_DMA_COM_RXCMD_EN	0x00000001 /* enable */
+#define PAS_DMA_COM_RXSTA_ACT	0x00000001 /* active */
+
+
+/* Per-interface and per-channel registers */
+#define _PAS_DMA_RXINT_STRIDE		0x20
+#define PAS_DMA_RXINT_RCMDSTA(i)	(0x200+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_RCMDSTA_EN	0x00000001
+#define    PAS_DMA_RXINT_RCMDSTA_ST	0x00000002
+#define    PAS_DMA_RXINT_RCMDSTA_MBT	0x00000008
+#define    PAS_DMA_RXINT_RCMDSTA_MDR	0x00000010
+#define    PAS_DMA_RXINT_RCMDSTA_MOO	0x00000020
+#define    PAS_DMA_RXINT_RCMDSTA_MBP	0x00000040
+#define    PAS_DMA_RXINT_RCMDSTA_BT	0x00000800
+#define    PAS_DMA_RXINT_RCMDSTA_DR	0x00001000
+#define    PAS_DMA_RXINT_RCMDSTA_OO	0x00002000
+#define    PAS_DMA_RXINT_RCMDSTA_BP	0x00004000
+#define    PAS_DMA_RXINT_RCMDSTA_TB	0x00008000
+#define    PAS_DMA_RXINT_RCMDSTA_ACT	0x00010000
+#define    PAS_DMA_RXINT_RCMDSTA_DROPS_M	0xfffe0000
+#define    PAS_DMA_RXINT_RCMDSTA_DROPS_S	17
+#define PAS_DMA_RXINT_CFG(i)		(0x204+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_CFG_RBP	0x80000000
+#define    PAS_DMA_RXINT_CFG_ITRR	0x40000000
+#define    PAS_DMA_RXINT_CFG_DHL_M	0x07000000
+#define    PAS_DMA_RXINT_CFG_DHL_S	24
+#define    PAS_DMA_RXINT_CFG_DHL(x)	(((x) << PAS_DMA_RXINT_CFG_DHL_S) & \
+					 PAS_DMA_RXINT_CFG_DHL_M)
+#define    PAS_DMA_RXINT_CFG_ITR	0x00400000
+#define    PAS_DMA_RXINT_CFG_LW		0x00200000
+#define    PAS_DMA_RXINT_CFG_L2		0x00100000
+#define    PAS_DMA_RXINT_CFG_HEN	0x00080000
+#define    PAS_DMA_RXINT_CFG_WIF	0x00000002
+#define    PAS_DMA_RXINT_CFG_WIL	0x00000001
+
+#define PAS_DMA_RXINT_INCR(i)		(0x210+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_INCR_INCR_M	0x0000ffff
+#define    PAS_DMA_RXINT_INCR_INCR_S	0
+#define    PAS_DMA_RXINT_INCR_INCR(x)	((x) & 0x0000ffff)
+#define PAS_DMA_RXINT_BASEL(i)		(0x218+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_BASEL_BRBL(x)	((x) & ~0x3f)
+#define PAS_DMA_RXINT_BASEU(i)		(0x21c+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_BASEU_BRBH(x)	((x) & 0xfff)
+#define    PAS_DMA_RXINT_BASEU_SIZ_M	0x3fff0000	/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_RXINT_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_RXINT_BASEU_SIZ(x)	(((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \
+					 PAS_DMA_RXINT_BASEU_SIZ_M)
+
+
+#define _PAS_DMA_TXCHAN_STRIDE	0x20    /* Size per channel		*/
+#define _PAS_DMA_TXCHAN_TCMDSTA	0x300	/* Command / Status		*/
+#define _PAS_DMA_TXCHAN_CFG	0x304	/* Configuration		*/
+#define _PAS_DMA_TXCHAN_DSCRBU	0x308	/* Descriptor BU Allocation	*/
+#define _PAS_DMA_TXCHAN_INCR	0x310	/* Descriptor increment		*/
+#define _PAS_DMA_TXCHAN_CNT	0x314	/* Descriptor count/offset	*/
+#define _PAS_DMA_TXCHAN_BASEL	0x318	/* Descriptor ring base (low)	*/
+#define _PAS_DMA_TXCHAN_BASEU	0x31c	/*			(high)	*/
+#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_TCMDSTA_EN	0x00000001	/* Enabled */
+#define    PAS_DMA_TXCHAN_TCMDSTA_ST	0x00000002	/* Stop interface */
+#define    PAS_DMA_TXCHAN_TCMDSTA_ACT	0x00010000	/* Active */
+#define    PAS_DMA_TXCHAN_TCMDSTA_SZ	0x00000800
+#define    PAS_DMA_TXCHAN_TCMDSTA_DB	0x00000400
+#define    PAS_DMA_TXCHAN_TCMDSTA_DE	0x00000200
+#define    PAS_DMA_TXCHAN_TCMDSTA_DA	0x00000100
+#define PAS_DMA_TXCHAN_CFG(c)     (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_CFG_TY_IFACE	0x00000000	/* Type = interface */
+#define    PAS_DMA_TXCHAN_CFG_TY_COPY	0x00000001	/* Type = copy only */
+#define    PAS_DMA_TXCHAN_CFG_TY_FUNC	0x00000002	/* Type = function */
+#define    PAS_DMA_TXCHAN_CFG_TY_XOR	0x00000003	/* Type = xor only */
+#define    PAS_DMA_TXCHAN_CFG_TATTR_M	0x0000003c
+#define    PAS_DMA_TXCHAN_CFG_TATTR_S	2
+#define    PAS_DMA_TXCHAN_CFG_TATTR(x)	(((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
+					 PAS_DMA_TXCHAN_CFG_TATTR_M)
+#define    PAS_DMA_TXCHAN_CFG_LPDQ	0x00000800
+#define    PAS_DMA_TXCHAN_CFG_LPSQ	0x00000400
+#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000003c0
+#define    PAS_DMA_TXCHAN_CFG_WT_S	6
+#define    PAS_DMA_TXCHAN_CFG_WT(x)	(((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
+					 PAS_DMA_TXCHAN_CFG_WT_M)
+#define    PAS_DMA_TXCHAN_CFG_TRD	0x00010000	/* translate data */
+#define    PAS_DMA_TXCHAN_CFG_TRR	0x00008000	/* translate rings */
+#define    PAS_DMA_TXCHAN_CFG_UP	0x00004000	/* update tx descr when sent */
+#define    PAS_DMA_TXCHAN_CFG_CL	0x00002000	/* Clean last line */
+#define    PAS_DMA_TXCHAN_CFG_CF	0x00001000	/* Clean first line */
+#define PAS_DMA_TXCHAN_INCR(c)    (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_BASEL(c)   (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_BASEL_BRBL_M	0xffffffc0
+#define    PAS_DMA_TXCHAN_BASEL_BRBL_S	0
+#define    PAS_DMA_TXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \
+					 PAS_DMA_TXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_TXCHAN_BASEU(c)   (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_BASEU_BRBH_M	0x00000fff
+#define    PAS_DMA_TXCHAN_BASEU_BRBH_S	0
+#define    PAS_DMA_TXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \
+					 PAS_DMA_TXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_TXCHAN_BASEU_SIZ_M	0x3fff0000
+#define    PAS_DMA_TXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_TXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \
+					 PAS_DMA_TXCHAN_BASEU_SIZ_M)
+
+#define _PAS_DMA_RXCHAN_STRIDE	0x20    /* Size per channel		*/
+#define _PAS_DMA_RXCHAN_CCMDSTA	0x800	/* Command / Status		*/
+#define _PAS_DMA_RXCHAN_CFG	0x804	/* Configuration		*/
+#define _PAS_DMA_RXCHAN_INCR	0x810	/* Descriptor increment		*/
+#define _PAS_DMA_RXCHAN_CNT	0x814	/* Descriptor count/offset	*/
+#define _PAS_DMA_RXCHAN_BASEL	0x818	/* Descriptor ring base (low)	*/
+#define _PAS_DMA_RXCHAN_BASEU	0x81c	/*			(high)	*/
+#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_CCMDSTA_EN	0x00000001	/* Enabled */
+#define    PAS_DMA_RXCHAN_CCMDSTA_ST	0x00000002	/* Stop interface */
+#define    PAS_DMA_RXCHAN_CCMDSTA_ACT	0x00010000	/* Active */
+#define    PAS_DMA_RXCHAN_CCMDSTA_DU	0x00020000
+#define    PAS_DMA_RXCHAN_CCMDSTA_OD	0x00002000
+#define    PAS_DMA_RXCHAN_CCMDSTA_FD	0x00001000
+#define    PAS_DMA_RXCHAN_CCMDSTA_DT	0x00000800
+#define PAS_DMA_RXCHAN_CFG(c)     (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_CFG_CTR	0x00000400
+#define    PAS_DMA_RXCHAN_CFG_HBU_M	0x00000380
+#define    PAS_DMA_RXCHAN_CFG_HBU_S	7
+#define    PAS_DMA_RXCHAN_CFG_HBU(x)	(((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \
+					 PAS_DMA_RXCHAN_CFG_HBU_M)
+#define PAS_DMA_RXCHAN_INCR(c)    (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define PAS_DMA_RXCHAN_BASEL(c)   (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_BASEL_BRBL_M	0xffffffc0
+#define    PAS_DMA_RXCHAN_BASEL_BRBL_S	0
+#define    PAS_DMA_RXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \
+					 PAS_DMA_RXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_RXCHAN_BASEU(c)   (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_BASEU_BRBH_M	0x00000fff
+#define    PAS_DMA_RXCHAN_BASEU_BRBH_S	0
+#define    PAS_DMA_RXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \
+					 PAS_DMA_RXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_RXCHAN_BASEU_SIZ_M	0x3fff0000
+#define    PAS_DMA_RXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_RXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \
+					 PAS_DMA_RXCHAN_BASEU_SIZ_M)
+
+#define    PAS_STATUS_PCNT_M		0x000000000000ffffull
+#define    PAS_STATUS_PCNT_S		0
+#define    PAS_STATUS_DCNT_M		0x00000000ffff0000ull
+#define    PAS_STATUS_DCNT_S		16
+#define    PAS_STATUS_BPCNT_M		0x0000ffff00000000ull
+#define    PAS_STATUS_BPCNT_S		32
+#define    PAS_STATUS_CAUSE_M		0xf000000000000000ull
+#define    PAS_STATUS_TIMER		0x1000000000000000ull
+#define    PAS_STATUS_ERROR		0x2000000000000000ull
+#define    PAS_STATUS_SOFT		0x4000000000000000ull
+#define    PAS_STATUS_INT		0x8000000000000000ull
+
+#define PAS_IOB_COM_PKTHDRCNT		0x120
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M	0x0fff0000
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S	16
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M	0x00000fff
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S	0
+
+#define PAS_IOB_DMA_RXCH_CFG(i)		(0x1100 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_M		0x00000fff
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_S		0
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \
+						 PAS_IOB_DMA_RXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_TXCH_CFG(i)		(0x1200 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_M		0x00000fff
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_S		0
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \
+						 PAS_IOB_DMA_TXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_RXCH_STAT(i)	(0x1300 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_STAT_INTGEN	0x00001000
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_M	0x00000fff
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_S	0
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\
+						 PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_TXCH_STAT(i)	(0x1400 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_STAT_INTGEN	0x00001000
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_M	0x00000fff
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_S	0
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\
+						 PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_RXCH_RESET(i)	(0x1500 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT_M	0xffff0000
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT_S	16
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
+						 PAS_IOB_DMA_RXCH_RESET_PCNT_M)
+#define    PAS_IOB_DMA_RXCH_RESET_PCNTRST	0x00000020
+#define    PAS_IOB_DMA_RXCH_RESET_DCNTRST	0x00000010
+#define    PAS_IOB_DMA_RXCH_RESET_TINTC		0x00000008
+#define    PAS_IOB_DMA_RXCH_RESET_DINTC		0x00000004
+#define    PAS_IOB_DMA_RXCH_RESET_SINTC		0x00000002
+#define    PAS_IOB_DMA_RXCH_RESET_PINTC		0x00000001
+#define PAS_IOB_DMA_TXCH_RESET(i)	(0x1600 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT_M	0xffff0000
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT_S	16
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
+						 PAS_IOB_DMA_TXCH_RESET_PCNT_M)
+#define    PAS_IOB_DMA_TXCH_RESET_PCNTRST	0x00000020
+#define    PAS_IOB_DMA_TXCH_RESET_DCNTRST	0x00000010
+#define    PAS_IOB_DMA_TXCH_RESET_TINTC		0x00000008
+#define    PAS_IOB_DMA_TXCH_RESET_DINTC		0x00000004
+#define    PAS_IOB_DMA_TXCH_RESET_SINTC		0x00000002
+#define    PAS_IOB_DMA_TXCH_RESET_PINTC		0x00000001
+
+#define PAS_IOB_DMA_COM_TIMEOUTCFG		0x1700
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M	0x00ffffff
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S	0
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x)	(((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \
+						 PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M)
+
+/* Transmit descriptor fields */
+#define	XCT_MACTX_T		0x8000000000000000ull
+#define	XCT_MACTX_ST		0x4000000000000000ull
+#define XCT_MACTX_NORES		0x0000000000000000ull
+#define XCT_MACTX_8BRES		0x1000000000000000ull
+#define XCT_MACTX_24BRES	0x2000000000000000ull
+#define XCT_MACTX_40BRES	0x3000000000000000ull
+#define XCT_MACTX_I		0x0800000000000000ull
+#define XCT_MACTX_O		0x0400000000000000ull
+#define XCT_MACTX_E		0x0200000000000000ull
+#define XCT_MACTX_VLAN_M	0x0180000000000000ull
+#define XCT_MACTX_VLAN_NOP	0x0000000000000000ull
+#define XCT_MACTX_VLAN_REMOVE	0x0080000000000000ull
+#define XCT_MACTX_VLAN_INSERT   0x0100000000000000ull
+#define XCT_MACTX_VLAN_REPLACE  0x0180000000000000ull
+#define XCT_MACTX_CRC_M		0x0060000000000000ull
+#define XCT_MACTX_CRC_NOP	0x0000000000000000ull
+#define XCT_MACTX_CRC_INSERT	0x0020000000000000ull
+#define XCT_MACTX_CRC_PAD	0x0040000000000000ull
+#define XCT_MACTX_CRC_REPLACE	0x0060000000000000ull
+#define XCT_MACTX_SS		0x0010000000000000ull
+#define XCT_MACTX_LLEN_M	0x00007fff00000000ull
+#define XCT_MACTX_LLEN_S	32ull
+#define XCT_MACTX_LLEN(x)	((((long)(x)) << XCT_MACTX_LLEN_S) & \
+				 XCT_MACTX_LLEN_M)
+#define XCT_MACTX_IPH_M		0x00000000f8000000ull
+#define XCT_MACTX_IPH_S		27ull
+#define XCT_MACTX_IPH(x)	((((long)(x)) << XCT_MACTX_IPH_S) & \
+				 XCT_MACTX_IPH_M)
+#define XCT_MACTX_IPO_M		0x0000000007c00000ull
+#define XCT_MACTX_IPO_S		22ull
+#define XCT_MACTX_IPO(x)	((((long)(x)) << XCT_MACTX_IPO_S) & \
+				 XCT_MACTX_IPO_M)
+#define XCT_MACTX_CSUM_M	0x0000000000000060ull
+#define XCT_MACTX_CSUM_NOP	0x0000000000000000ull
+#define XCT_MACTX_CSUM_TCP	0x0000000000000040ull
+#define XCT_MACTX_CSUM_UDP	0x0000000000000060ull
+#define XCT_MACTX_V6		0x0000000000000010ull
+#define XCT_MACTX_C		0x0000000000000004ull
+#define XCT_MACTX_AL2		0x0000000000000002ull
+
+/* Receive descriptor fields */
+#define	XCT_MACRX_T		0x8000000000000000ull
+#define	XCT_MACRX_ST		0x4000000000000000ull
+#define XCT_MACRX_RR_M		0x3000000000000000ull
+#define XCT_MACRX_RR_NORES	0x0000000000000000ull
+#define XCT_MACRX_RR_8BRES	0x1000000000000000ull
+#define XCT_MACRX_O		0x0400000000000000ull
+#define XCT_MACRX_E		0x0200000000000000ull
+#define XCT_MACRX_FF		0x0100000000000000ull
+#define XCT_MACRX_PF		0x0080000000000000ull
+#define XCT_MACRX_OB		0x0040000000000000ull
+#define XCT_MACRX_OD		0x0020000000000000ull
+#define XCT_MACRX_FS		0x0010000000000000ull
+#define XCT_MACRX_NB_M		0x000fc00000000000ull
+#define XCT_MACRX_NB_S		46ULL
+#define XCT_MACRX_NB(x)		((((long)(x)) << XCT_MACRX_NB_S) & \
+				 XCT_MACRX_NB_M)
+#define XCT_MACRX_LLEN_M	0x00003fff00000000ull
+#define XCT_MACRX_LLEN_S	32ULL
+#define XCT_MACRX_LLEN(x)	((((long)(x)) << XCT_MACRX_LLEN_S) & \
+				 XCT_MACRX_LLEN_M)
+#define XCT_MACRX_CRC		0x0000000080000000ull
+#define XCT_MACRX_LEN_M		0x0000000060000000ull
+#define XCT_MACRX_LEN_TOOSHORT	0x0000000020000000ull
+#define XCT_MACRX_LEN_BELOWMIN	0x0000000040000000ull
+#define XCT_MACRX_LEN_TRUNC	0x0000000060000000ull
+#define XCT_MACRX_CAST_M	0x0000000018000000ull
+#define XCT_MACRX_CAST_UNI	0x0000000000000000ull
+#define XCT_MACRX_CAST_MULTI	0x0000000008000000ull
+#define XCT_MACRX_CAST_BROAD	0x0000000010000000ull
+#define XCT_MACRX_CAST_PAUSE	0x0000000018000000ull
+#define XCT_MACRX_VLC_M		0x0000000006000000ull
+#define XCT_MACRX_FM		0x0000000001000000ull
+#define XCT_MACRX_HTY_M		0x0000000000c00000ull
+#define XCT_MACRX_HTY_IPV4_OK	0x0000000000000000ull
+#define XCT_MACRX_HTY_IPV6 	0x0000000000400000ull
+#define XCT_MACRX_HTY_IPV4_BAD	0x0000000000800000ull
+#define XCT_MACRX_HTY_NONIP	0x0000000000c00000ull
+#define XCT_MACRX_IPP_M		0x00000000003f0000ull
+#define XCT_MACRX_IPP_S		16
+#define XCT_MACRX_CSUM_M	0x000000000000ffffull
+#define XCT_MACRX_CSUM_S	0
+
+#define XCT_PTR_T		0x8000000000000000ull
+#define XCT_PTR_LEN_M		0x7ffff00000000000ull
+#define XCT_PTR_LEN_S		44
+#define XCT_PTR_LEN(x)		((((long)(x)) << XCT_PTR_LEN_S) & \
+				 XCT_PTR_LEN_M)
+#define XCT_PTR_ADDR_M		0x00000fffffffffffull
+#define XCT_PTR_ADDR_S		0
+#define XCT_PTR_ADDR(x)		((((long)(x)) << XCT_PTR_ADDR_S) & \
+				 XCT_PTR_ADDR_M)
+
+/* Receive interface 8byte result fields */
+#define XCT_RXRES_8B_L4O_M	0xff00000000000000ull
+#define XCT_RXRES_8B_L4O_S	56
+#define XCT_RXRES_8B_RULE_M	0x00ffff0000000000ull
+#define XCT_RXRES_8B_RULE_S	40
+#define XCT_RXRES_8B_EVAL_M	0x000000ffff000000ull
+#define XCT_RXRES_8B_EVAL_S	24
+#define XCT_RXRES_8B_HTYPE_M	0x0000000000f00000ull
+#define XCT_RXRES_8B_HASH_M	0x00000000000fffffull
+#define XCT_RXRES_8B_HASH_S	0
+
+/* Receive interface buffer fields */
+#define XCT_RXB_LEN_M		0x0ffff00000000000ull
+#define XCT_RXB_LEN_S		44
+#define XCT_RXB_LEN(x)		((((long)(x)) << XCT_RXB_LEN_S) & \
+				 XCT_RXB_LEN_M)
+#define XCT_RXB_ADDR_M		0x00000fffffffffffull
+#define XCT_RXB_ADDR_S		0
+#define XCT_RXB_ADDR(x)		((((long)(x)) << XCT_RXB_ADDR_S) & \
+				 XCT_RXB_ADDR_M)
+
+/* Copy descriptor fields */
+#define XCT_COPY_T		0x8000000000000000ull
+#define XCT_COPY_ST		0x4000000000000000ull
+#define XCT_COPY_RR_M		0x3000000000000000ull
+#define XCT_COPY_RR_NORES	0x0000000000000000ull
+#define XCT_COPY_RR_8BRES	0x1000000000000000ull
+#define XCT_COPY_RR_24BRES	0x2000000000000000ull
+#define XCT_COPY_RR_40BRES	0x3000000000000000ull
+#define XCT_COPY_I		0x0800000000000000ull
+#define XCT_COPY_O		0x0400000000000000ull
+#define XCT_COPY_E		0x0200000000000000ull
+#define XCT_COPY_STY_ZERO	0x01c0000000000000ull
+#define XCT_COPY_DTY_PREF	0x0038000000000000ull
+#define XCT_COPY_LLEN_M		0x0007ffff00000000ull
+#define XCT_COPY_LLEN_S		32
+#define XCT_COPY_LLEN(x)	((((long)(x)) << XCT_COPY_LLEN_S) & \
+				 XCT_COPY_LLEN_M)
+#define XCT_COPY_SE		0x0000000000000001ull
+
+/* Function descriptor fields */
+#define XCT_FUN_T		0x8000000000000000ull
+#define XCT_FUN_ST		0x4000000000000000ull
+#define XCT_FUN_RR_M		0x3000000000000000ull
+#define XCT_FUN_RR_NORES	0x0000000000000000ull
+#define XCT_FUN_RR_8BRES	0x1000000000000000ull
+#define XCT_FUN_RR_24BRES	0x2000000000000000ull
+#define XCT_FUN_RR_40BRES	0x3000000000000000ull
+#define XCT_FUN_I		0x0800000000000000ull
+#define XCT_FUN_O		0x0400000000000000ull
+#define XCT_FUN_E		0x0200000000000000ull
+#define XCT_FUN_FUN_M		0x01c0000000000000ull
+#define XCT_FUN_FUN_S		54
+#define XCT_FUN_FUN(x)		((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
+#define XCT_FUN_CRM_M		0x0038000000000000ull
+#define XCT_FUN_CRM_NOP		0x0000000000000000ull
+#define XCT_FUN_CRM_SIG		0x0008000000000000ull
+#define XCT_FUN_LLEN_M		0x0007ffff00000000ull
+#define XCT_FUN_LLEN_S		32
+#define XCT_FUN_LLEN(x)		((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
+#define XCT_FUN_SHL_M		0x00000000f8000000ull
+#define XCT_FUN_SHL_S		27
+#define XCT_FUN_SHL(x)		((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
+#define XCT_FUN_CHL_M		0x0000000007c00000ull
+#define XCT_FUN_HSZ_M		0x00000000003c0000ull
+#define XCT_FUN_ALG_M		0x0000000000038000ull
+#define XCT_FUN_HP		0x0000000000004000ull
+#define XCT_FUN_BCM_M		0x0000000000003800ull
+#define XCT_FUN_BCP_M		0x0000000000000600ull
+#define XCT_FUN_SIG_M		0x00000000000001f0ull
+#define XCT_FUN_SIG_TCP4	0x0000000000000140ull
+#define XCT_FUN_SIG_TCP6	0x0000000000000150ull
+#define XCT_FUN_SIG_UDP4	0x0000000000000160ull
+#define XCT_FUN_SIG_UDP6	0x0000000000000170ull
+#define XCT_FUN_A		0x0000000000000008ull
+#define XCT_FUN_C		0x0000000000000004ull
+#define XCT_FUN_AL2		0x0000000000000002ull
+#define XCT_FUN_SE		0x0000000000000001ull
+
+/* Function descriptor 8byte result fields */
+#define XCT_FUNRES_8B_CS_M	0x0000ffff00000000ull
+#define XCT_FUNRES_8B_CS_S	32
+#define XCT_FUNRES_8B_CRC_M	0x00000000ffffffffull
+#define XCT_FUNRES_8B_CRC_S	0
+
+/* Control descriptor fields */
+#define CTRL_CMD_T		0x8000000000000000ull
+#define CTRL_CMD_META_EVT	0x2000000000000000ull
+#define CTRL_CMD_O		0x0400000000000000ull
+#define CTRL_CMD_ETYPE_M	0x0038000000000000ull
+#define CTRL_CMD_ETYPE_EXT	0x0000000000000000ull
+#define CTRL_CMD_ETYPE_WSET	0x0020000000000000ull
+#define CTRL_CMD_ETYPE_WCLR	0x0028000000000000ull
+#define CTRL_CMD_ETYPE_SET	0x0030000000000000ull
+#define CTRL_CMD_ETYPE_CLR	0x0038000000000000ull
+#define CTRL_CMD_REG_M		0x000000000000007full
+#define CTRL_CMD_REG_S		0
+#define CTRL_CMD_REG(x)		((((long)(x)) << CTRL_CMD_REG_S) & \
+				 CTRL_CMD_REG_M)
+
+
+
+/* Prototypes for the shared DMA functions in the platform code. */
+
+/* DMA TX Channel type. Right now only limitations used are event types 0/1,
+ * for event-triggered DMA transactions.
+ */
+
+enum pasemi_dmachan_type {
+	RXCHAN = 0,		/* Any RX chan */
+	TXCHAN = 1,		/* Any TX chan */
+	TXCHAN_EVT0 = 0x1001,	/* TX chan in event class 0 (chan 0-9) */
+	TXCHAN_EVT1 = 0x2001,	/* TX chan in event class 1 (chan 10-19) */
+};
+
+struct pasemi_dmachan {
+	int		 chno;		/* Channel number */
+	enum pasemi_dmachan_type chan_type;	/* TX / RX */
+	u64		*status;	/* Ptr to cacheable status */
+	int		 irq;		/* IRQ used by channel */
+	unsigned int	 ring_size;	/* size of allocated ring */
+	dma_addr_t	 ring_dma;	/* DMA address for ring */
+	u64		*ring_virt;	/* Virt address for ring */
+	void		*priv;		/* Ptr to start of client struct */
+};
+
+/* Read/write the different registers in the I/O Bridge, Ethernet
+ * and DMA Controller
+ */
+extern unsigned int pasemi_read_iob_reg(unsigned int reg);
+extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val);
+
+extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg);
+extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val);
+
+extern unsigned int pasemi_read_dma_reg(unsigned int reg);
+extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val);
+
+/* Channel management routines */
+
+extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type,
+				   int total_size, int offset);
+extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan);
+
+extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan,
+				  const u32 cmdsta);
+extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan);
+
+/* Common routines to allocate rings and buffers */
+
+extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size);
+extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan);
+
+extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size,
+				  dma_addr_t *handle);
+extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
+				dma_addr_t *handle);
+
+/* Routines to allocate flags (events) for channel syncronization */
+extern int  pasemi_dma_alloc_flag(void);
+extern void pasemi_dma_free_flag(int flag);
+extern void pasemi_dma_set_flag(int flag);
+extern void pasemi_dma_clear_flag(int flag);
+
+/* Routines to allocate function engines */
+extern int  pasemi_dma_alloc_fun(void);
+extern void pasemi_dma_free_fun(int fun);
+
+/* Initialize the library, must be called before any other functions */
+extern int pasemi_dma_init(void);
+
+#endif /* ASM_PASEMI_DMA_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
new file mode 100644
index 00000000000..ae2ea803a0f
--- /dev/null
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -0,0 +1,302 @@
+#ifndef _ASM_POWERPC_PCI_BRIDGE_H
+#define _ASM_POWERPC_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+extern unsigned int ppc_pci_flags;
+enum {
+	/* Force re-assigning all resources (ignore firmware
+	 * setup completely)
+	 */
+	PPC_PCI_REASSIGN_ALL_RSRC	= 0x00000001,
+
+	/* Re-assign all bus numbers */
+	PPC_PCI_REASSIGN_ALL_BUS	= 0x00000002,
+
+	/* Do not try to assign, just use existing setup */
+	PPC_PCI_PROBE_ONLY		= 0x00000004,
+
+	/* Don't bother with ISA alignment unless the bridge has
+	 * ISA forwarding enabled
+	 */
+	PPC_PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
+
+	/* Enable domain numbers in /proc */
+	PPC_PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
+	/* ... except for domain 0 */
+	PPC_PCI_COMPAT_DOMAIN_0		= 0x00000020,
+};
+
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	struct pci_bus *bus;
+	char is_dynamic;
+#ifdef CONFIG_PPC64
+	int node;
+#endif
+	struct device_node *dn;
+	struct list_head list_node;
+	struct device *parent;
+
+	int first_busno;
+	int last_busno;
+#ifndef CONFIG_PPC64
+	int self_busno;
+#endif
+
+	void __iomem *io_base_virt;
+#ifdef CONFIG_PPC64
+	void *io_base_alloc;
+#endif
+	resource_size_t io_base_phys;
+#ifndef CONFIG_PPC64
+	resource_size_t pci_io_size;
+#endif
+
+	/* Some machines (PReP) have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	resource_size_t pci_mem_offset;
+#ifdef CONFIG_PPC64
+	unsigned long pci_io_size;
+#endif
+
+	struct pci_ops *ops;
+	unsigned int __iomem *cfg_addr;
+	void __iomem *cfg_data;
+
+#ifndef CONFIG_PPC64
+	/*
+	 * Used for variants of PCI indirect handling and possible quirks:
+	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+	 *  EXT_REG - provides access to PCI-e extended registers
+	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
+	 *   to determine which bus number to match on when generating type0
+	 *   config cycles
+	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
+	 *   hanging if we don't have link and try to do config cycles to
+	 *   anything but the PHB.  Only allow talking to the PHB if this is
+	 *   set.
+	 *  BIG_ENDIAN - cfg_addr is a big endian register
+	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
+	 *   the PLB4.  Effectively disable MRM commands by setting this.
+	 */
+#define PPC_INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
+#define PPC_INDIRECT_TYPE_EXT_REG		0x00000002
+#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
+#define PPC_INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
+#define PPC_INDIRECT_TYPE_BIG_ENDIAN		0x00000010
+#define PPC_INDIRECT_TYPE_BROKEN_MRM		0x00000020
+	u32 indirect_type;
+#endif	/* !CONFIG_PPC64 */
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource	io_resource;
+	struct resource mem_resources[3];
+	int global_number;		/* PCI domain number */
+#ifdef CONFIG_PPC64
+	unsigned long buid;
+	unsigned long dma_window_base_cur;
+	unsigned long dma_window_size;
+
+	void *private_data;
+#endif	/* CONFIG_PPC64 */
+};
+
+#ifndef CONFIG_PPC64
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
+/* These are used for config access before all the PCI probing
+   has been done. */
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 val);
+
+extern int early_find_capability(struct pci_controller *hose, int bus,
+				 int dev_fn, int cap);
+
+extern void setup_indirect_pci(struct pci_controller* hose,
+			       resource_size_t cfg_addr,
+			       resource_size_t cfg_data, u32 flags);
+extern void setup_grackle(struct pci_controller *hose);
+#else	/* CONFIG_PPC64 */
+
+/*
+ * PCI stuff, for nodes representing PCI devices, pointed to
+ * by device_node->data.
+ */
+struct iommu_table;
+
+struct pci_dn {
+	int	busno;			/* pci bus number */
+	int	devfn;			/* pci device and function number */
+
+	struct  pci_controller *phb;	/* for pci devices */
+	struct	iommu_table *iommu_table;	/* for phb's or bridges */
+	struct	device_node *node;	/* back-pointer to the device_node */
+
+	int	pci_ext_config_space;	/* for pci devices */
+
+#ifdef CONFIG_EEH
+	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
+	int	class_code;		/* pci device class */
+	int	eeh_mode;		/* See eeh.h for possible EEH_MODEs */
+	int	eeh_config_addr;
+	int	eeh_pe_config_addr; /* new-style partition endpoint address */
+	int	eeh_check_count;	/* # times driver ignored error */
+	int	eeh_freeze_count;	/* # times this device froze up. */
+	int	eeh_false_positives;	/* # times this device reported #ff's */
+	u32	config_space[16];	/* saved PCI config space */
+#endif
+};
+
+/* Get the pointer to a device_node's pci_dn */
+#define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
+
+extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
+
+/* Get a device_node from a pci_dev.  This code must be fast except
+ * in the case where the sysdata is incorrect and needs to be fixed
+ * up (this will only happen once).
+ * In this case the sysdata will have been inherited from a PCI host
+ * bridge or a PCI-PCI bridge further up the tree, so it will point
+ * to a valid struct pci_dn, just not the one we want.
+ */
+static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
+{
+	struct device_node *dn = dev->sysdata;
+	struct pci_dn *pdn = dn->data;
+
+	if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number)
+		return dn;	/* fast path.  sysdata is good */
+	return fetch_dev_dn(dev);
+}
+
+static inline int pci_device_from_OF_node(struct device_node *np,
+					  u8 *bus, u8 *devfn)
+{
+	if (!PCI_DN(np))
+		return -ENODEV;
+	*bus = PCI_DN(np)->busno;
+	*devfn = PCI_DN(np)->devfn;
+	return 0;
+}
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	if (bus->self)
+		return pci_device_to_OF_node(bus->self);
+	else
+		return bus->sysdata; /* Must be root bus (PHB) */
+}
+
+/** Find the bus corresponding to the indicated device node */
+extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
+
+/** Remove all of the PCI devices under this bus */
+extern void pcibios_remove_pci_devices(struct pci_bus *bus);
+
+/** Discover new pci devices under this bus, and add them */
+extern void pcibios_add_pci_devices(struct pci_bus *bus);
+extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
+
+extern int pcibios_remove_root_bus(struct pci_controller *phb);
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	struct device_node *busdn = bus->sysdata;
+
+	BUG_ON(busdn == NULL);
+	return PCI_DN(busdn)->phb;
+}
+
+
+extern void isa_bridge_find_early(struct pci_controller *hose);
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* Check if address hits the reserved legacy IO range */
+	unsigned long ea = (unsigned long)address;
+	return ea >= ISA_IO_BASE && ea < ISA_IO_END;
+}
+
+extern int pcibios_unmap_io_space(struct pci_bus *bus);
+extern int pcibios_map_io_space(struct pci_bus *bus);
+
+/* Return values for ppc_md.pci_probe_mode function */
+#define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
+#define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
+#define PCI_PROBE_DEVTREE	1	/* Instantiate from device tree */
+
+#ifdef CONFIG_NUMA
+#define PHB_SET_NODE(PHB, NODE)		((PHB)->node = (NODE))
+#else
+#define PHB_SET_NODE(PHB, NODE)		((PHB)->node = -1)
+#endif
+
+#endif	/* CONFIG_PPC64 */
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller *pci_find_hose_for_OF_device(
+			struct device_node* node);
+
+/* Fill up host controller resources from the OF node */
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
+/* Allocate & free a PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+
+#ifdef CONFIG_PCI
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	return (unsigned long)-1;
+}
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	return 0;
+}
+#endif	/* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_PCI_BRIDGE_H */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
new file mode 100644
index 00000000000..a05a942b1c2
--- /dev/null
+++ b/arch/powerpc/include/asm/pci.h
@@ -0,0 +1,228 @@
+#ifndef __ASM_POWERPC_PCI_H
+#define __ASM_POWERPC_PCI_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/machdep.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#include <asm-generic/pci-dma-compat.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+struct pci_dev;
+
+/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
+#define IOBASE_BRIDGE_NUMBER	0
+#define IOBASE_MEMORY		1
+#define IOBASE_IO		2
+#define IOBASE_ISA_IO		3
+#define IOBASE_ISA_MEM		4
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers (don't do that on ppc64 yet !)
+ */
+#define pcibios_assign_all_busses()    	(ppc_pci_flags & \
+					 PPC_PCI_REASSIGN_ALL_BUS)
+#define pcibios_scan_all_fns(a, b)	0
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	if (ppc_md.pci_get_legacy_ide_irq)
+		return ppc_md.pci_get_legacy_ide_irq(dev, channel);
+	return channel ? 15 : 14;
+}
+
+#ifdef CONFIG_PPC64
+
+/*
+ * We want to avoid touching the cacheline size or MWI bit.
+ * pSeries firmware sets the cacheline size (which is not the cpu cacheline
+ * size in all cases) and hardware treats MWI the same as memory write.
+ */
+#define PCI_DISABLE_MWI
+
+#ifdef CONFIG_PCI
+extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
+extern struct dma_mapping_ops *get_pci_dma_ops(void);
+
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#else	/* CONFIG_PCI */
+#define set_pci_dma_ops(d)
+#define get_pci_dma_ops()	NULL
+#endif
+
+#else /* 32-bit */
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+#endif /* CONFIG_PPC64 */
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+
+struct vm_area_struct;
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
+/*
+ * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
+ * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
+ * so on are not nops.
+ * and thus...
+ */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#else /* 32-bit && coherent */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
+/* The PCI address space does not equal the physical memory address
+ * space (we have an IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+#else /* 32-bit */
+
+/* The PCI address space does equal the physical memory
+ * address space (no IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+#endif /* CONFIG_PPC64 */
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+			struct pci_bus_region *region,
+			struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+			struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
+			struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+extern void pcibios_setup_new_device(struct pci_dev *dev);
+
+extern void pcibios_claim_one_bus(struct pci_bus *b);
+
+extern void pcibios_resource_survey(void);
+
+extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+
+extern struct pci_dev *of_create_pci_dev(struct device_node *node,
+					struct pci_bus *bus, int devfn);
+
+extern void of_scan_pci_bridge(struct device_node *node,
+				struct pci_dev *dev);
+
+extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
+
+extern int pci_read_irq_line(struct pci_dev *dev);
+
+struct file;
+extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
+					 unsigned long pfn,
+					 unsigned long size,
+					 pgprot_t prot);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+
+extern void pcibios_do_bus_setup(struct pci_bus *bus);
+extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
+
+#endif	/* __KERNEL__ */
+#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h
new file mode 100644
index 00000000000..f879252b7ea
--- /dev/null
+++ b/arch/powerpc/include/asm/percpu.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_POWERPC_PERCPU_H_
+#define _ASM_POWERPC_PERCPU_H_
+#ifdef __powerpc64__
+#include <linux/compiler.h>
+
+/*
+ * Same as asm-generic/percpu.h, except that we store the per cpu offset
+ * in the paca. Based on the x86-64 implementation.
+ */
+
+#ifdef CONFIG_SMP
+
+#include <asm/paca.h>
+
+#define __per_cpu_offset(cpu) (paca[cpu].data_offset)
+#define __my_cpu_offset local_paca->data_offset
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#endif /* CONFIG_SMP */
+#endif /* __powerpc64__ */
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_POWERPC_PERCPU_H_ */
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
new file mode 100644
index 00000000000..58c07147b3e
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_POWERPC_PGALLOC_32_H
+#define _ASM_POWERPC_PGALLOC_32_H
+
+#include <linux/threads.h>
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+/* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
+#define pmd_free(mm, x) 		do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+/* #define pgd_populate(mm, pmd, pte)      BUG() */
+
+#ifndef CONFIG_BOOKE
+#define pmd_populate_kernel(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+#else
+#define pmd_populate_kernel(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+#endif
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
+extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
+extern void pte_free(struct mm_struct *mm, pgtable_t pte);
+
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ASM_POWERPC_PGALLOC_32_H */
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
new file mode 100644
index 00000000000..812a1d8f35c
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -0,0 +1,166 @@
+#ifndef _ASM_POWERPC_PGALLOC_64_H
+#define _ASM_POWERPC_PGALLOC_64_H
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+#include <linux/percpu.h>
+
+#ifndef CONFIG_PPC_SUBPAGE_PROT
+static inline void subpage_prot_free(pgd_t *pgd) {}
+#endif
+
+extern struct kmem_cache *pgtable_cache[];
+
+#define PGD_CACHE_NUM		0
+#define PUD_CACHE_NUM		1
+#define PMD_CACHE_NUM		1
+#define HUGEPTE_CACHE_NUM	2
+#define PTE_NONCACHE_NUM	7  /* from GFP rather than kmem_cache */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	subpage_prot_free(pgd);
+	kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
+}
+
+#ifndef CONFIG_PPC_64K_PAGES
+
+#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, PUD)
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
+				GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	pud_set(pud, (unsigned long)pmd);
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+
+#else /* CONFIG_PPC_64K_PAGES */
+
+#define pud_populate(mm, pud, pmd)	pud_set(pud, (unsigned long)pmd)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	pmd_set(pmd, (unsigned long)pte);
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif /* CONFIG_PPC_64K_PAGES */
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
+				GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+        return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	pte_t *pte;
+
+	pte = pte_alloc_one_kernel(mm, address);
+	if (!pte)
+		return NULL;
+	page = virt_to_page(pte);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
+{
+	pgtable_page_dtor(ptepage);
+	__free_page(ptepage);
+}
+
+#define PGF_CACHENUM_MASK	0x7
+
+typedef struct pgtable_free {
+	unsigned long val;
+} pgtable_free_t;
+
+static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
+						unsigned long mask)
+{
+	BUG_ON(cachenum > PGF_CACHENUM_MASK);
+
+	return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
+}
+
+static inline void pgtable_free(pgtable_free_t pgf)
+{
+	void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
+	int cachenum = pgf.val & PGF_CACHENUM_MASK;
+
+	if (cachenum == PTE_NONCACHE_NUM)
+		free_page((unsigned long)p);
+	else
+		kmem_cache_free(pgtable_cache[cachenum], p);
+}
+
+extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+
+#define __pte_free_tlb(tlb,ptepage)	\
+do { \
+	pgtable_page_dtor(ptepage); \
+	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
+		PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+} while (0)
+#define __pmd_free_tlb(tlb, pmd) 	\
+	pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
+		PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
+#ifndef CONFIG_PPC_64K_PAGES
+#define __pud_free_tlb(tlb, pud)	\
+	pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
+		PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
+#endif /* CONFIG_PPC_64K_PAGES */
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ASM_POWERPC_PGALLOC_64_H */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
new file mode 100644
index 00000000000..b4505ed0f0f
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_PGALLOC_H
+#define _ASM_POWERPC_PGALLOC_H
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PPC64
+#include <asm/pgalloc-64.h>
+#else
+#include <asm/pgalloc-32.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h
new file mode 100644
index 00000000000..6b18ba9d2d8
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-4k.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_PGTABLE_4K_H
+#define _ASM_POWERPC_PGTABLE_4K_H
+/*
+ * Entries per page directory level.  The PTE level must use a 64b record
+ * for each page table entry.  The PMD and PGD level use a 32b record for
+ * each entry by assuming that each entry is page aligned.
+ */
+#define PTE_INDEX_SIZE  9
+#define PMD_INDEX_SIZE  7
+#define PUD_INDEX_SIZE  7
+#define PGD_INDEX_SIZE  9
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PUD_TABLE_SIZE	(sizeof(pud_t) << PUD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif	/* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PMD_SHIFT
+
+/* PUD_SHIFT determines what a third-level page table entry can map */
+#define PUD_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
+#define PGDIR_SHIFT	(PUD_SHIFT + PUD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* PTE bits */
+#define _PAGE_HASHPTE	0x0400 /* software: pte has an associated HPTE */
+#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
+#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
+#define _PAGE_F_SECOND  _PAGE_SECONDARY
+#define _PAGE_F_GIX     _PAGE_GROUP_IX
+#define _PAGE_SPECIAL	0x10000 /* software: special page */
+#define __HAVE_ARCH_PTE_SPECIAL
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
+			 _PAGE_SECONDARY | _PAGE_GROUP_IX)
+
+/* There is no 4K PFN hack on 4K pages */
+#define _PAGE_4K_PFN	0
+
+/* PAGE_MASK gives the right answer below, but only by accident */
+/* It should be preserving the high 48 bits and then specifically */
+/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+                         _PAGE_HPTEFLAGS)
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0
+/* Bits to mask out from a PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0
+/* Bits to mask out from a PGD to get to the PUD page */
+#define PGD_MASKED_BITS		0
+
+/* shift to put page number into pte */
+#define PTE_RPN_SHIFT	(17)
+
+#ifdef STRICT_MM_TYPECHECKS
+#define __real_pte(e,p)		((real_pte_t){(e)})
+#define __rpte_to_pte(r)	((r).pte)
+#else
+#define __real_pte(e,p)		(e)
+#define __rpte_to_pte(r)	(__pte(r))
+#endif
+#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >> 12)
+
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
+	do {							         \
+		index = 0;					         \
+		shift = mmu_psize_defs[psize].shift;		         \
+
+#define pte_iterate_hashed_end() } while(0)
+
+#ifdef CONFIG_PPC_HAS_HASH_64K
+#define pte_pagesize_index(mm, addr, pte)	get_slice_psize(mm, addr)
+#else
+#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
+#endif
+
+/*
+ * 4-level page tables related bits
+ */
+
+#define pgd_none(pgd)		(!pgd_val(pgd))
+#define pgd_bad(pgd)		(pgd_val(pgd) == 0)
+#define pgd_present(pgd)	(pgd_val(pgd) != 0)
+#define pgd_clear(pgdp)		(pgd_val(*(pgdp)) = 0)
+#define pgd_page_vaddr(pgd)	(pgd_val(pgd) & ~PGD_MASKED_BITS)
+#define pgd_page(pgd)		virt_to_page(pgd_page_vaddr(pgd))
+
+#define pud_offset(pgdp, addr)	\
+  (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
+    (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+
+#define pud_ERROR(e) \
+	printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+#define remap_4k_pfn(vma, addr, pfn, prot)	\
+	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
+#endif /* _ASM_POWERPC_PGTABLE_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h
new file mode 100644
index 00000000000..07b0d8f09cb
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-64k.h
@@ -0,0 +1,155 @@
+#ifndef _ASM_POWERPC_PGTABLE_64K_H
+#define _ASM_POWERPC_PGTABLE_64K_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+
+#define PTE_INDEX_SIZE  12
+#define PMD_INDEX_SIZE  12
+#define PUD_INDEX_SIZE	0
+#define PGD_INDEX_SIZE  4
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+/*
+ * For the sub-page protection option, we extend the PGD with one of
+ * these.  Basically we have a 3-level tree, with the top level being
+ * the protptrs array.  To optimize speed and memory consumption when
+ * only addresses < 4GB are being protected, pointers to the first
+ * four pages of sub-page protection words are stored in the low_prot
+ * array.
+ * Each page of sub-page protection words protects 1GB (4 bytes
+ * protects 64k).  For the 3-level tree, each page of pointers then
+ * protects 8TB.
+ */
+struct subpage_prot_table {
+	unsigned long maxaddr;	/* only addresses < this are protected */
+	unsigned int **protptrs[2];
+	unsigned int *low_prot[4];
+};
+
+#undef PGD_TABLE_SIZE
+#define PGD_TABLE_SIZE		((sizeof(pgd_t) << PGD_INDEX_SIZE) + \
+				 sizeof(struct subpage_prot_table))
+
+#define SBP_L1_BITS		(PAGE_SHIFT - 2)
+#define SBP_L2_BITS		(PAGE_SHIFT - 3)
+#define SBP_L1_COUNT		(1 << SBP_L1_BITS)
+#define SBP_L2_COUNT		(1 << SBP_L2_BITS)
+#define SBP_L2_SHIFT		(PAGE_SHIFT + SBP_L1_BITS)
+#define SBP_L3_SHIFT		(SBP_L2_SHIFT + SBP_L2_BITS)
+
+extern void subpage_prot_free(pgd_t *pgd);
+
+static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
+{
+	return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD);
+}
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
+#endif	/* __ASSEMBLY__ */
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PAGE_SHIFT
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* Additional PTE bits (don't change without checking asm in hash_low.S) */
+#define __HAVE_ARCH_PTE_SPECIAL
+#define _PAGE_SPECIAL	0x00000400 /* software: special page */
+#define _PAGE_HPTE_SUB	0x0ffff000 /* combo only: sub pages HPTE bits */
+#define _PAGE_HPTE_SUB0	0x08000000 /* combo only: first sub page */
+#define _PAGE_COMBO	0x10000000 /* this is a combo 4k page */
+#define _PAGE_4K_PFN	0x20000000 /* PFN is for a single 4k page */
+
+/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
+ * we set that to be the whole sub-bits mask. The C code will only
+ * test this, so a multi-bit mask will work. For combo pages, this
+ * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
+ * all the sub bits. For real 64k pages, we now have the assembly set
+ * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
+ * that mask. This is fine as long as the HIDX bits are never set on
+ * a PTE that isn't hashed, which is the case today.
+ *
+ * A little nit is for the huge page C code, which does the hashing
+ * in C, we need to provide which bit to use.
+ */
+#define _PAGE_HASHPTE	_PAGE_HPTE_SUB
+
+/* Note the full page bits must be in the same location as for normal
+ * 4k pages as the same asssembly will be used to insert 64K pages
+ * wether the kernel has CONFIG_PPC_64K_PAGES or not
+ */
+#define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
+#define _PAGE_F_GIX     0x00007000 /* full page: hidx bits */
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
+
+/* Shift to put page number into pte.
+ *
+ * That gives us a max RPN of 34 bits, which means a max of 50 bits
+ * of addressable physical space, or 46 bits for the special 4k PFNs.
+ */
+#define PTE_RPN_SHIFT	(30)
+#define PTE_RPN_MAX	(1UL << (64 - PTE_RPN_SHIFT))
+#define PTE_RPN_MASK	(~((1UL<<PTE_RPN_SHIFT)-1))
+
+/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
+ * pgprot changes
+ */
+#define _PAGE_CHG_MASK	(PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+                         _PAGE_ACCESSED)
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0x1ff
+/* Bits to mask out from a PGD/PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0x1ff
+
+/* Manipulate "rpte" values */
+#define __real_pte(e,p) 	((real_pte_t) { \
+	(e), pte_val(*((p) + PTRS_PER_PTE)) })
+#define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
+        (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
+#define __rpte_to_pte(r)	((r).pte)
+#define __rpte_sub_valid(rpte, index) \
+	(pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
+
+
+/* Trick: we set __end to va + 64k, which happens works for
+ * a 16M page as well as we want only one iteration
+ */
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)	    \
+        do {                                                                \
+                unsigned long __end = va + PAGE_SIZE;                       \
+                unsigned __split = (psize == MMU_PAGE_4K ||                 \
+				    psize == MMU_PAGE_64K_AP);              \
+                shift = mmu_psize_defs[psize].shift;                        \
+		for (index = 0; va < __end; index++, va += (1L << shift)) { \
+		        if (!__split || __rpte_sub_valid(rpte, index)) do { \
+
+#define pte_iterate_hashed_end() } while(0); } } while(0)
+
+#define pte_pagesize_index(mm, addr, pte)	\
+	(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
+
+#define remap_4k_pfn(vma, addr, pfn, prot)				\
+	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,		\
+			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
+
+#endif /* _ASM_POWERPC_PGTABLE_64K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
new file mode 100644
index 00000000000..6fe39e32704
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -0,0 +1,802 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
+#define _ASM_POWERPC_PGTABLE_PPC32_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/io.h>			/* For sub-arch specific PPC_PIN_SIZE */
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+
+#ifdef CONFIG_44x
+extern int icache_44x_need_flush;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The PowerPC MMU uses a hash table containing PTEs, together with
+ * a set of 16 segment registers (on 32-bit implementations), to define
+ * the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings.  We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code.  Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk.  These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1.  The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access.  The TLB does not have accessed nor write
+ * protect.  We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect.  We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators.  Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded.  We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added.  We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC.  The 8M pages are only used for kernel
+ * mapping of well known areas.  The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully-associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ * For any >32-bit physical address platform, we can use the following
+ * two level page table layout where the pgdir is 8KB and the MS 13 bits
+ * are an index to the second level table.  The combined pgdir/pmd first
+ * level has 2048 entries and the second level has 512 64-bit PTE entries.
+ * -Matt
+ */
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_SHIFT)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << (32 - PGDIR_SHIFT))
+#endif	/* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
+		(unsigned long long)pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 64MB value just means that there will be a 64MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * We no longer map larger than phys RAM with the BATs so we don't have
+ * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
+ * about clashes between our early calls to ioremap() that start growing down
+ * from ioremap_base being run into the VM area allocations (growing upwards
+ * from VMALLOC_START).  For this reason we have ioremap_bot to check when
+ * we actually run into our mappings setup in the early boot with the VM
+ * system.  This really does become a problem for machines with good amounts
+ * of RAM.  -- Cort
+ */
+#define VMALLOC_OFFSET (0x1000000) /* 16M */
+#ifdef PPC_PIN_SIZE
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#else
+#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#endif
+#define VMALLOC_END	ioremap_bot
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+
+#if defined(CONFIG_40x)
+
+/* There are several potential gotchas here.  The 40x hardware TLBLO
+   field looks like this:
+
+   0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+   RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
+
+   Where possible we make the Linux PTE bits match up with this
+
+   - bits 20 and 21 must be cleared, because we use 4k pages (40x can
+     support down to 1k pages), this is done in the TLBMiss exception
+     handler.
+   - We use only zones 0 (for kernel pages) and 1 (for user pages)
+     of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
+     miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
+     zone.
+   - PRESENT *must* be in the bottom two bits because swap cache
+     entries use the top 30 bits.  Because 40x doesn't support SMP
+     anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
+     is cleared in the TLB miss handler before the TLB entry is loaded.
+   - All other bits of the PTE are loaded into TLBLO without
+     modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+     software PTE bits.  We actually use use bits 21, 24, 25, and
+     30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+     PRESENT.
+*/
+
+/* Definitions for 40x embedded chips. */
+#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_FILE	0x001	/* when !present: nonlinear file mapping */
+#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
+#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
+#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
+#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_RW	0x040	/* software: Writes permitted */
+#define	_PAGE_DIRTY	0x080	/* software: dirty page */
+#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
+
+#define _PMD_PRESENT	0x400	/* PMD points to page of PTEs */
+#define _PMD_BAD	0x802
+#define _PMD_SIZE	0x0e0	/* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M	0x0c0
+#define _PMD_SIZE_16M	0x0e0
+#define PMD_PAGE_SIZE(pmdval)	(1024 << (((pmdval) & _PMD_SIZE) >> 4))
+
+/* Until my rework is finished, 40x still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES	1
+
+#elif defined(CONFIG_44x)
+/*
+ * Definitions for PPC440
+ *
+ * Because of the 3 word TLB entries to support 36-bit addressing,
+ * the attribute are difficult to map in such a fashion that they
+ * are easily loaded during exception processing.  I decided to
+ * organize the entry so the ERPN is the only portion in the
+ * upper word of the PTE and the attribute bits below are packed
+ * in as sensibly as they can be in the area below a 4KB page size
+ * oriented RPN.  This at least makes it easy to load the RPN and
+ * ERPN fields in the TLB. -Matt
+ *
+ * Note that these bits preclude future use of a page size
+ * less than 4KB.
+ *
+ *
+ * PPC 440 core has following TLB attribute fields;
+ *
+ *   TLB1:
+ *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ *   RPN.................................  -  -  -  -  -  - ERPN.......
+ *
+ *   TLB2:
+ *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ *   -  -  -  -  -    - U0 U1 U2 U3 W  I  M  G  E   - UX UW UR SX SW SR
+ *
+ * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
+ * TLB2 storage attibute fields. Those are:
+ *
+ *   TLB2:
+ *   0...10    11   12   13   14   15   16...31
+ *   no change WL1  IL1I IL1D IL2I IL2D no change
+ *
+ * There are some constrains and options, to decide mapping software bits
+ * into TLB entry.
+ *
+ *   - PRESENT *must* be in the bottom three bits because swap cache
+ *     entries use the top 29 bits for TLB2.
+ *
+ *   - FILE *must* be in the bottom three bits because swap cache
+ *     entries use the top 29 bits for TLB2.
+ *
+ *   - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
+ *     doesn't support SMP. So we can use this as software bit, like
+ *     DIRTY.
+ *
+ * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
+ * for memory protection related functions (see PTE structure in
+ * include/asm-ppc/mmu.h).  The _PAGE_XXX definitions in this file map to the
+ * above bits.  Note that the bit values are CPU specific, not architecture
+ * specific.
+ *
+ * The kernel PTE entry holds an arch-dependent swp_entry structure under
+ * certain situations. In other words, in such situations some portion of
+ * the PTE bits are used as a swp_entry. In the PPC implementation, the
+ * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
+ * hold protection values. That means the three protection bits are
+ * reserved for both PTE and SWAP entry at the most significant three
+ * LSBs.
+ *
+ * There are three protection bits available for SWAP entry:
+ *	_PAGE_PRESENT
+ *	_PAGE_FILE
+ *	_PAGE_HASHPTE (if HW has)
+ *
+ * So those three bits have to be inside of 0-2nd LSB of PTE.
+ *
+ */
+
+#define _PAGE_PRESENT	0x00000001		/* S: PTE valid */
+#define _PAGE_RW	0x00000002		/* S: Write permission */
+#define _PAGE_FILE	0x00000004		/* S: nonlinear file mapping */
+#define _PAGE_HWEXEC	0x00000004		/* H: Execute permission */
+#define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
+#define _PAGE_DIRTY	0x00000010		/* S: Page dirty */
+#define _PAGE_USER	0x00000040		/* S: User page */
+#define _PAGE_ENDIAN	0x00000080		/* H: E bit */
+#define _PAGE_GUARDED	0x00000100		/* H: G bit */
+#define _PAGE_COHERENT	0x00000200		/* H: M bit */
+#define _PAGE_NO_CACHE	0x00000400		/* H: I bit */
+#define _PAGE_WRITETHRU	0x00000800		/* H: W bit */
+
+/* TODO: Add large page lowmem mapping support */
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK	0xffffffff00000000ULL
+
+
+#elif defined(CONFIG_FSL_BOOKE)
+/*
+   MMU Assist Register 3:
+
+   32 33 34 35 36  ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+   RPN......................  0  0 U0 U1 U2 U3 UX SX UW SW UR SR
+
+   - PRESENT *must* be in the bottom three bits because swap cache
+     entries use the top 29 bits.
+
+   - FILE *must* be in the bottom three bits because swap cache
+     entries use the top 29 bits.
+*/
+
+/* Definitions for FSL Book-E Cores */
+#define _PAGE_PRESENT	0x00001	/* S: PTE contains a translation */
+#define _PAGE_USER	0x00002	/* S: User page (maps to UR) */
+#define _PAGE_FILE	0x00002	/* S: when !present: nonlinear file mapping */
+#define _PAGE_RW	0x00004	/* S: Write permission (SW) */
+#define _PAGE_DIRTY	0x00008	/* S: Page dirty */
+#define _PAGE_HWEXEC	0x00010	/* H: SX permission */
+#define _PAGE_ACCESSED	0x00020	/* S: Page referenced */
+
+#define _PAGE_ENDIAN	0x00040	/* H: E bit */
+#define _PAGE_GUARDED	0x00080	/* H: G bit */
+#define _PAGE_COHERENT	0x00100	/* H: M bit */
+#define _PAGE_NO_CACHE	0x00200	/* H: I bit */
+#define _PAGE_WRITETHRU	0x00400	/* H: W bit */
+
+#ifdef CONFIG_PTE_64BIT
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK	0xffffffffffff0000ULL
+#endif
+
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+#elif defined(CONFIG_8xx)
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT	0x0001	/* Page is valid */
+#define _PAGE_FILE	0x0002	/* when !present: nonlinear file mapping */
+#define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
+#define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
+
+/* These five software bits must be masked out when the entry is loaded
+ * into the TLB.
+ */
+#define _PAGE_EXEC	0x0008	/* software: i-cache coherency required */
+#define _PAGE_GUARDED	0x0010	/* software: guarded access */
+#define _PAGE_DIRTY	0x0020	/* software: page changed */
+#define _PAGE_RW	0x0040	/* software: user write access allowed */
+#define _PAGE_ACCESSED	0x0080	/* software: page referenced */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change.  It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_HWWRITE	0x0100	/* h/w write enable: never set in Linux PTE */
+#define _PAGE_USER	0x0800	/* One of the PP bits, the other is USER&~RW */
+
+#define _PMD_PRESENT	0x0001
+#define _PMD_BAD	0x0ff0
+#define _PMD_PAGE_MASK	0x000c
+#define _PMD_PAGE_8M	0x000c
+
+#define _PTE_NONE_MASK _PAGE_ACCESSED
+
+/* Until my rework is finished, 8xx still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES	1
+
+#else /* CONFIG_6xx */
+/* Definitions for 60x, 740/750, etc. */
+#define _PAGE_PRESENT	0x001	/* software: pte contains a translation */
+#define _PAGE_HASHPTE	0x002	/* hash_page has made an HPTE for this pte */
+#define _PAGE_FILE	0x004	/* when !present: nonlinear file mapping */
+#define _PAGE_USER	0x004	/* usermode access allowed */
+#define _PAGE_GUARDED	0x008	/* G: prohibit speculative access */
+#define _PAGE_COHERENT	0x010	/* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE	0x020	/* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x040	/* W: cache write-through */
+#define _PAGE_DIRTY	0x080	/* C: page changed */
+#define _PAGE_ACCESSED	0x100	/* R: page referenced */
+#define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
+#define _PAGE_RW	0x400	/* software: user write access allowed */
+
+#define _PTE_NONE_MASK	_PAGE_HASHPTE
+
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES	1
+
+#endif
+
+/*
+ * Some bits are only used on some cpu families...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE	0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED	0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE	0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC	0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC	0
+#endif
+#ifndef _PAGE_ENDIAN
+#define _PAGE_ENDIAN	0
+#endif
+#ifndef _PAGE_COHERENT
+#define _PAGE_COHERENT	0
+#endif
+#ifndef _PAGE_WRITETHRU
+#define _PAGE_WRITETHRU	0
+#endif
+#ifndef _PMD_PRESENT_MASK
+#define _PMD_PRESENT_MASK	_PMD_PRESENT
+#endif
+#ifndef _PMD_SIZE
+#define _PMD_SIZE	0
+#define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+
+#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+				 _PAGE_WRITETHRU | _PAGE_ENDIAN | \
+				 _PAGE_USER | _PAGE_ACCESSED | \
+				 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
+				 _PAGE_EXEC | _PAGE_HWEXEC)
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose.  -- paulus.
+ */
+
+#ifdef CONFIG_44x
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
+#else
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
+#endif
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+#define _PAGE_KERNEL	(_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
+
+#ifdef CONFIG_PPC_STD_MMU
+/* On standard PPC MMU, no user access implies kernel read/write access,
+ * so to write-protect kernel memory we must turn on user access */
+#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
+#else
+#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED)
+#endif
+
+#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define _PAGE_RAM	(_PAGE_KERNEL | _PAGE_HWEXEC)
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+	defined(CONFIG_KPROBES)
+/* We want the debuggers to be able to set breakpoints anywhere, so
+ * don't write protect the kernel text */
+#define _PAGE_RAM_TEXT	_PAGE_RAM
+#else
+#define _PAGE_RAM_TEXT	(_PAGE_KERNEL_RO | _PAGE_HWEXEC)
+#endif
+
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL		__pgprot(_PAGE_RAM)
+#define PAGE_KERNEL_NOCACHE	__pgprot(_PAGE_IO)
+
+/*
+ * The PowerPC can only do execute protection on a segment (256MB) basis,
+ * not on a page basis.  So we consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_X
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY_X
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_X
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED_X
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
+ * kernel without large page PMD support */
+extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
+
+/*
+ * Conversions between PTE values and page frame numbers.
+ */
+
+/* in some case we want to additionaly adjust where the pfn is in the pte to
+ * allow room for more flags */
+#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT + 8)
+#else
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT)
+#endif
+
+#define pte_pfn(x)		(pte_val(x) >> PFN_SHIFT_OFFSET)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define pfn_pte(pfn, prot)	__pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
+					pgprot_val(prot))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep)	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
+#define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
+#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#ifndef __ASSEMBLY__
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte)	{ return 0; }
+
+static inline void pte_uncache(pte_t pte)       { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)         { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_wrprotect(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+	pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) {
+	return pte; }
+static inline unsigned long pte_pgprot(pte_t pte)
+{
+	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_pages(unsigned context, unsigned long va,
+			    unsigned long pmdval, int count);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va,
+			  unsigned long pmdval);
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.  In the 64-bit PTE case we lock around the
+ * low PTE word since we expect ALL flag bits to be there
+ */
+#ifndef CONFIG_PTE_64BIT
+static inline unsigned long pte_update(pte_t *p,
+				       unsigned long clr,
+				       unsigned long set)
+{
+#ifdef PTE_ATOMIC_UPDATES
+	unsigned long old, tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%0,0,%3\n\
+	andc	%1,%0,%4\n\
+	or	%1,%1,%5\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+#else /* PTE_ATOMIC_UPDATES */
+	unsigned long old = pte_val(*p);
+	*p = __pte((old & ~clr) | set);
+#endif /* !PTE_ATOMIC_UPDATES */
+
+#ifdef CONFIG_44x
+	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+		icache_44x_need_flush = 1;
+#endif
+	return old;
+}
+#else /* CONFIG_PTE_64BIT */
+/* TODO: Change that to only modify the low word and move set_pte_at()
+ * out of line
+ */
+static inline unsigned long long pte_update(pte_t *p,
+					    unsigned long clr,
+					    unsigned long set)
+{
+#ifdef PTE_ATOMIC_UPDATES
+	unsigned long long old;
+	unsigned long tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%L0,0,%4\n\
+	lwzx	%0,0,%3\n\
+	andc	%1,%L0,%5\n\
+	or	%1,%1,%6\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%4\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+#else /* PTE_ATOMIC_UPDATES */
+	unsigned long long old = pte_val(*p);
+	*p = __pte((old & ~(unsigned long long)clr) | set);
+#endif /* !PTE_ATOMIC_UPDATES */
+
+#ifdef CONFIG_44x
+	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+		icache_44x_need_flush = 1;
+#endif
+	return old;
+}
+#endif /* CONFIG_PTE_64BIT */
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ * On machines which use an MMU hash table we avoid changing the
+ * _PAGE_HASHPTE bit.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+#if _PAGE_HASHPTE != 0
+	pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
+#else
+	*ptep = pte;
+#endif
+}
+
+/*
+ * 2.6 calls this without flushing the TLB entry; this is wrong
+ * for our hash-based implementation, we fix that up here.
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+	old = pte_update(ptep, _PAGE_ACCESSED, 0);
+#if _PAGE_HASHPTE != 0
+	if (old & _PAGE_HASHPTE) {
+		unsigned long ptephys = __pa(ptep) & PAGE_MASK;
+		flush_hash_pages(context, addr, ptephys, 1);
+	}
+#endif
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+	__ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				       pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
+	pte_update(ptep, 0, bits);
+}
+
+#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									   \
+	int __changed = !pte_same(*(__ptep), __entry);			   \
+	if (__changed) {						   \
+		__ptep_set_access_flags(__ptep, __entry, __dirty);         \
+		flush_tlb_page_nohash(__vma, __address);		   \
+	}								   \
+	__changed;							   \
+})
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
+
+/*
+ * Note that on Book E processors, the pmd contains the kernel virtual
+ * (lowmem) address of the pte page.  The physical address is less useful
+ * because everything runs with translation enabled (even the TLB miss
+ * handler).  On everything else the pmd contains the physical address
+ * of the pte page.  -- paulus
+ */
+#ifndef CONFIG_BOOKE
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+#else
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#endif
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr)	\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte)		kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte)	kunmap_atomic(pte, KM_PTE1)
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
+ *_PAGE_HASHPTE bit (if used).  -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x1f)
+#define __swp_offset(entry)		((entry).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t) { (type) | ((offset) << 5) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 3 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 3 })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
+		      pmd_t **pmdp);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
new file mode 100644
index 00000000000..4597c491e9b
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -0,0 +1,466 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_
+#define _ASM_POWERPC_PGTABLE_PPC64_H_
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the ppc64 hashed page table.
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <asm/tlbflush.h>
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PPC_64K_PAGES
+#include <asm/pgtable-64k.h>
+#else
+#include <asm/pgtable-4k.h>
+#endif
+
+#define FIRST_USER_ADDRESS	0
+
+/*
+ * Size of EA range mapped by our pagetables.
+ */
+#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
+                	    PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
+#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
+
+#if TASK_SIZE_USER64 > PGTABLE_RANGE
+#error TASK_SIZE_USER64 exceeds pagetable range
+#endif
+
+#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#error TASK_SIZE_USER64 exceeds user VSID range
+#endif
+
+
+/*
+ * Define the address range of the vmalloc VM area.
+ */
+#define VMALLOC_START ASM_CONST(0xD000000000000000)
+#define VMALLOC_SIZE  (PGTABLE_RANGE >> 1)
+#define VMALLOC_END   (VMALLOC_START + VMALLOC_SIZE)
+
+/*
+ * Define the address ranges for MMIO and IO space :
+ *
+ *  ISA_IO_BASE = VMALLOC_END, 64K reserved area
+ *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
+ * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
+ */
+#define FULL_IO_SIZE	0x80000000ul
+#define  ISA_IO_BASE	(VMALLOC_END)
+#define  ISA_IO_END	(VMALLOC_END + 0x10000ul)
+#define  PHB_IO_BASE	(ISA_IO_END)
+#define  PHB_IO_END	(VMALLOC_END + FULL_IO_SIZE)
+#define IOREMAP_BASE	(PHB_IO_END)
+#define IOREMAP_END	(VMALLOC_START + PGTABLE_RANGE)
+
+/*
+ * Region IDs
+ */
+#define REGION_SHIFT		60UL
+#define REGION_MASK		(0xfUL << REGION_SHIFT)
+#define REGION_ID(ea)		(((unsigned long)(ea)) >> REGION_SHIFT)
+
+#define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
+#define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
+#define VMEMMAP_REGION_ID	(0xfUL)
+#define USER_REGION_ID		(0UL)
+
+/*
+ * Defines the address of the vmemap area, in its own region
+ */
+#define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
+
+/*
+ * Common bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible. Additional
+ * bits may be defined in pgtable-*.h
+ */
+#define _PAGE_PRESENT	0x0001 /* software: pte contains a translation */
+#define _PAGE_USER	0x0002 /* matches one of the PP bits */
+#define _PAGE_FILE	0x0002 /* (!present only) software: pte holds file offset */
+#define _PAGE_EXEC	0x0004 /* No execute on POWER4 and newer (we invert) */
+#define _PAGE_GUARDED	0x0008
+#define _PAGE_COHERENT	0x0010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE	0x0020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x0040 /* W: cache write-through */
+#define _PAGE_DIRTY	0x0080 /* C: page changed */
+#define _PAGE_ACCESSED	0x0100 /* R: page referenced */
+#define _PAGE_RW	0x0200 /* software: user write access allowed */
+#define _PAGE_BUSY	0x0800 /* software: PTE & hash are busy */
+
+/* Strong Access Ordering */
+#define _PAGE_SAO	(_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
+
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY)
+
+/* __pgprot defined in arch/powerpc/incliude/asm/page.h */
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_KERNEL	__pgprot(_PAGE_BASE | _PAGE_WRENABLE)
+#define PAGE_KERNEL_CI	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+			       _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
+
+#define PAGE_AGP	__pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
+#define HAVE_PAGE_AGP
+
+#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \
+				 _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
+				 _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
+ 				 _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
+/* PTEIDX nibble */
+#define _PTEIDX_SECONDARY	0x8
+#define _PTEIDX_GROUP_IX	0x7
+
+
+/*
+ * POWER4 and newer have per page execute protection, older chips can only
+ * do this on a segment (256MB) basis.
+ *
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ *
+ * Note due to the way vm flags are laid out, the bits are XWR
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_X
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY_X
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_X
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED_X
+#define __S111	PAGE_SHARED_X
+
+#ifdef CONFIG_PPC_MM_SLICES
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+#endif /* CONFIG_PPC_MM_SLICES */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * mk_pte takes a (struct page *) as input
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	pte_t pte;
+
+
+	pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot);
+	return pte;
+}
+
+#define pte_modify(_pte, newprot) \
+  (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
+
+#define pte_none(pte)		((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+/* pte_clear moved to later in this file */
+
+#define pte_pfn(x)		((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT)))
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
+#define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
+
+#define pmd_set(pmdp, pmdval) 	(pmd_val(*(pmdp)) = (pmdval))
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(!is_kernel_addr(pmd_val(pmd)) \
+				 || (pmd_val(pmd) & PMD_BAD_BITS))
+#define	pmd_present(pmd)	(pmd_val(pmd) != 0)
+#define	pmd_clear(pmdp)		(pmd_val(*(pmdp)) = 0)
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & ~PMD_MASKED_BITS)
+#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+
+#define pud_set(pudp, pudval)	(pud_val(*(pudp)) = (pudval))
+#define pud_none(pud)		(!pud_val(pud))
+#define	pud_bad(pud)		(!is_kernel_addr(pud_val(pud)) \
+				 || (pud_val(pud) & PUD_BAD_BITS))
+#define pud_present(pud)	(pud_val(pud) != 0)
+#define pud_clear(pudp)		(pud_val(*(pudp)) = 0)
+#define pud_page_vaddr(pud)	(pud_val(pud) & ~PUD_MASKED_BITS)
+#define pud_page(pud)		virt_to_page(pud_page_vaddr(pud))
+
+#define pgd_set(pgdp, pudp)	({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
+
+/*
+ * Find an entry in a page-table-directory.  We combine the address region
+ * (the high order N bits) and the pgd portion of the address.
+ */
+/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
+#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff)
+
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+#define pmd_offset(pudp,addr) \
+  (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+#define pte_offset_kernel(dir,addr) \
+  (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte)			do { } while(0)
+#define pte_unmap_nested(pte)		do { } while(0)
+
+/* to find an entry in a kernel page-table-directory */
+/* This now only contains the vmalloc pages */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
+static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_wrprotect(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_RW); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+	pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkhuge(pte_t pte) {
+	return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) {
+	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
+static inline unsigned long pte_pgprot(pte_t pte)
+{
+	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+}
+
+/* Atomic PTE updates */
+static inline unsigned long pte_update(struct mm_struct *mm,
+				       unsigned long addr,
+				       pte_t *ptep, unsigned long clr,
+				       int huge)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%3		# pte_update\n\
+	andi.	%1,%0,%6\n\
+	bne-	1b \n\
+	andc	%1,%0,%4 \n\
+	stdcx.	%1,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
+	: "cc" );
+
+	if (old & _PAGE_HASHPTE)
+		hpte_need_flush(mm, addr, ptep, old, huge);
+	return old;
+}
+
+static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
+					      unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+		return 0;
+	old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(__vma, __addr, __ptep)		   \
+({									   \
+	int __r;							   \
+	__r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
+	__r;								   \
+})
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+       		return;
+	old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+	old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+}
+
+/*
+ * We currently remove entries from the hashtable regardless of whether
+ * the entry was young or dirty. The generic routines only flush if the
+ * entry was young or dirty which is not good enough.
+ *
+ * We should be more intelligent about this but for the moment we override
+ * these functions and force a tlb flush unconditionally
+ */
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(__vma, __address, __ptep)		\
+({									\
+	int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
+						  __ptep);		\
+	__young;							\
+})
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long addr, pte_t *ptep)
+{
+	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
+	return __pte(old);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t * ptep)
+{
+	pte_update(mm, addr, ptep, ~0UL, 0);
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+	if (pte_present(*ptep))
+		pte_clear(mm, addr, ptep);
+	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+	*ptep = pte;
+}
+
+/* Set the dirty and/or accessed bits atomically in a linux PTE, this
+ * function doesn't need to flush the hash entry
+ */
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%4\n\
+		andi.	%1,%0,%6\n\
+		bne-	1b \n\
+		or	%0,%3,%0\n\
+		stdcx.	%0,0,%4\n\
+		bne-	1b"
+	:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	:"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
+	:"cc");
+}
+#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									   \
+	int __changed = !pte_same(*(__ptep), __entry);			   \
+	if (__changed) {						   \
+		__ptep_set_access_flags(__ptep, __entry, __dirty);    	   \
+		flush_tlb_page_nohash(__vma, __address);		   \
+	}								   \
+	__changed;							   \
+})
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)	(((entry).val >> 1) & 0x3f)
+#define __swp_offset(entry)	((entry).val >> 8)
+#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)})
+#define __pte_to_swp_entry(pte)	((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT})
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << PTE_RPN_SHIFT })
+#define pte_to_pgoff(pte)	(pte_val(pte) >> PTE_RPN_SHIFT)
+#define pgoff_to_pte(off)	((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
+#define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_RPN_SHIFT)
+
+void pgtable_cache_init(void);
+
+/*
+ * find_linux_pte returns the address of a linux pte for a given
+ * effective address and directory.  If not found, it returns zero.
+ */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea)
+{
+	pgd_t *pg;
+	pud_t *pu;
+	pmd_t *pm;
+	pte_t *pt = NULL;
+
+	pg = pgdir + pgd_index(ea);
+	if (!pgd_none(*pg)) {
+		pu = pud_offset(pg, ea);
+		if (!pud_none(*pu)) {
+			pm = pmd_offset(pu, ea);
+			if (pmd_present(*pm))
+				pt = pte_offset_kernel(pm, ea);
+		}
+	}
+	return pt;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
new file mode 100644
index 00000000000..dbb8ca172e4
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_POWERPC_PGTABLE_H
+#define _ASM_POWERPC_PGTABLE_H
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+struct mm_struct;
+#endif /* !__ASSEMBLY__ */
+
+#if defined(CONFIG_PPC64)
+#  include <asm/pgtable-ppc64.h>
+#else
+#  include <asm/pgtable-ppc32.h>
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern pgd_t swapper_pg_dir[];
+
+extern void paging_init(void);
+
+/*
+ * kern_addr_valid is intended to indicate whether an address is a valid
+ * kernel address.  Most 32-bit archs define it as always true (like this)
+ * but most 64-bit archs actually perform a test.  What should we do here?
+ */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#include <asm-generic/pgtable.h>
+
+
+/*
+ * This gets called at the end of handling a page fault, when
+ * the kernel has put a new PTE into the page table for the process.
+ * We use it to ensure coherency between the i-cache and d-cache
+ * for the page which has just been mapped in.
+ * On machines which use an MMU hash table, we use this to put a
+ * corresponding HPTE into the hash table ahead of time, instead of
+ * waiting for the inevitable extra hash-table miss exception.
+ */
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h
new file mode 100644
index 00000000000..fa74c6c3e10
--- /dev/null
+++ b/arch/powerpc/include/asm/phyp_dump.h
@@ -0,0 +1,47 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PHYP_DUMP_H
+#define _PPC64_PHYP_DUMP_H
+
+#ifdef CONFIG_PHYP_DUMP
+
+/* The RMR region will be saved for later dumping
+ * whenever the kernel crashes. Set this to 256MB. */
+#define PHYP_DUMP_RMR_START 0x0
+#define PHYP_DUMP_RMR_END   (1UL<<28)
+
+struct phyp_dump {
+	/* Memory that is reserved during very early boot. */
+	unsigned long init_reserve_start;
+	unsigned long init_reserve_size;
+	/* cmd line options during boot */
+	unsigned long reserve_bootvar;
+	unsigned long phyp_dump_at_boot;
+	/* Check status during boot if dump supported, active & present*/
+	unsigned long phyp_dump_configured;
+	unsigned long phyp_dump_is_active;
+	/* store cpu & hpte size */
+	unsigned long cpu_state_size;
+	unsigned long hpte_region_size;
+	/* previous scratch area values */
+	unsigned long reserved_scratch_addr;
+	unsigned long reserved_scratch_size;
+};
+
+extern struct phyp_dump *phyp_dump_info;
+
+int early_init_dt_scan_phyp_dump(unsigned long node,
+		const char *uname, int depth, void *data);
+
+#endif /* CONFIG_PHYP_DUMP */
+#endif /* _PPC64_PHYP_DUMP_H */
diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h
new file mode 100644
index 00000000000..877c35a4356
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_feature.h
@@ -0,0 +1,405 @@
+/*
+ * Definition of platform feature hooks for PowerMacs
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Paul Mackerras &
+ *                    Ben. Herrenschmidt.
+ *
+ *
+ * Note: I removed media-bay details from the feature stuff, I believe it's
+ *       not worth it, the media-bay driver can directly use the mac-io
+ *       ASIC registers.
+ *
+ * Implementation note: Currently, none of these functions will block.
+ * However, they may internally protect themselves with a spinlock
+ * for way too long. Be prepared for at least some of these to block
+ * in the future.
+ *
+ * Unless specifically defined, the result code is assumed to be an
+ * error when negative, 0 is the default success result. Some functions
+ * may return additional positive result values.
+ *
+ * To keep implementation simple, all feature calls are assumed to have
+ * the prototype parameters (struct device_node* node, int value).
+ * When either is not used, pass 0.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_PMAC_FEATURE_H
+#define __ASM_POWERPC_PMAC_FEATURE_H
+
+#include <asm/macio.h>
+#include <asm/machdep.h>
+
+/*
+ * Known Mac motherboard models
+ *
+ * Please, report any error here to benh@kernel.crashing.org, thanks !
+ *
+ * Note that I don't fully maintain this list for Core99 & MacRISC2
+ * and I'm considering removing all NewWorld entries from it and
+ * entirely rely on the model string.
+ */
+
+/* PowerSurge are the first generation of PCI Pmacs. This include
+ * all of the Grand-Central based machines. We currently don't
+ * differenciate most of them.
+ */
+#define PMAC_TYPE_PSURGE		0x10	/* PowerSurge */
+#define PMAC_TYPE_ANS			0x11	/* Apple Network Server */
+
+/* Here is the infamous serie of OHare based machines
+ */
+#define PMAC_TYPE_COMET			0x20	/* Beleived to be PowerBook 2400 */
+#define PMAC_TYPE_HOOPER		0x21	/* Beleived to be PowerBook 3400 */
+#define PMAC_TYPE_KANGA			0x22	/* PowerBook 3500 (first G3) */
+#define PMAC_TYPE_ALCHEMY		0x23	/* Alchemy motherboard base */
+#define PMAC_TYPE_GAZELLE		0x24	/* Spartacus, some 5xxx/6xxx */
+#define PMAC_TYPE_UNKNOWN_OHARE		0x2f	/* Unknown, but OHare based */
+
+/* Here are the Heathrow based machines
+ * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
+ */
+#define PMAC_TYPE_GOSSAMER		0x30	/* Gossamer motherboard */
+#define PMAC_TYPE_SILK			0x31	/* Desktop PowerMac G3 */
+#define PMAC_TYPE_WALLSTREET		0x32	/* Wallstreet/Mainstreet PowerBook*/
+#define PMAC_TYPE_UNKNOWN_HEATHROW	0x3f	/* Unknown but heathrow based */
+
+/* Here are newworld machines based on Paddington (heathrow derivative)
+ */
+#define PMAC_TYPE_101_PBOOK		0x40	/* 101 PowerBook (aka Lombard) */
+#define PMAC_TYPE_ORIG_IMAC		0x41	/* First generation iMac */
+#define PMAC_TYPE_YOSEMITE		0x42	/* B&W G3 */
+#define PMAC_TYPE_YIKES			0x43	/* Yikes G4 (PCI graphics) */
+#define PMAC_TYPE_UNKNOWN_PADDINGTON	0x4f	/* Unknown but paddington based */
+
+/* Core99 machines based on UniNorth 1.0 and 1.5
+ *
+ * Note: A single entry here may cover several actual models according
+ * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
+ * FireWire based iMacs, etc...). Those machines are too similar to be
+ * distinguished here, when they need to be differencied, use the
+ * device-tree "model" or "compatible" property.
+ */
+#define PMAC_TYPE_ORIG_IBOOK		0x40	/* First iBook model (no firewire) */
+#define PMAC_TYPE_SAWTOOTH		0x41	/* Desktop G4s */
+#define PMAC_TYPE_FW_IMAC		0x42	/* FireWire iMacs (except Pangea based) */
+#define PMAC_TYPE_FW_IBOOK		0x43	/* FireWire iBooks (except iBook2) */
+#define PMAC_TYPE_CUBE			0x44	/* Cube PowerMac */
+#define PMAC_TYPE_QUICKSILVER		0x45	/* QuickSilver G4s */
+#define PMAC_TYPE_PISMO			0x46	/* Pismo PowerBook */
+#define PMAC_TYPE_TITANIUM		0x47	/* Titanium PowerBook */
+#define PMAC_TYPE_TITANIUM2		0x48	/* Titanium II PowerBook (no L3, M6) */
+#define PMAC_TYPE_TITANIUM3		0x49	/* Titanium III PowerBook (with L3 & M7) */
+#define PMAC_TYPE_TITANIUM4		0x50	/* Titanium IV PowerBook (with L3 & M9) */
+#define PMAC_TYPE_EMAC			0x50	/* eMac */
+#define PMAC_TYPE_UNKNOWN_CORE99	0x5f
+
+/* MacRisc2 with UniNorth 2.0 */
+#define PMAC_TYPE_RACKMAC		0x80	/* XServe */
+#define PMAC_TYPE_WINDTUNNEL		0x81
+
+/* MacRISC2 machines based on the Pangea chipset
+ */
+#define PMAC_TYPE_PANGEA_IMAC		0x100	/* Flower Power iMac */
+#define PMAC_TYPE_IBOOK2		0x101	/* iBook2 (polycarbonate) */
+#define PMAC_TYPE_FLAT_PANEL_IMAC	0x102	/* Flat panel iMac */
+#define PMAC_TYPE_UNKNOWN_PANGEA	0x10f
+
+/* MacRISC2 machines based on the Intrepid chipset
+ */
+#define PMAC_TYPE_UNKNOWN_INTREPID	0x11f	/* Generic */
+
+/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
+ * but rather machine families
+ */
+#define PMAC_TYPE_POWERMAC_G5		0x150	/* U3 & U3H based */
+#define PMAC_TYPE_POWERMAC_G5_U3L	0x151	/* U3L based desktop */
+#define PMAC_TYPE_IMAC_G5		0x152	/* iMac G5 */
+#define PMAC_TYPE_XSERVE_G5		0x153	/* Xserve G5 */
+#define PMAC_TYPE_UNKNOWN_K2		0x19f	/* Any other K2 based */
+#define PMAC_TYPE_UNKNOWN_SHASTA       	0x19e	/* Any other Shasta based */
+
+/*
+ * Motherboard flags
+ */
+
+#define PMAC_MB_CAN_SLEEP		0x00000001
+#define PMAC_MB_HAS_FW_POWER		0x00000002
+#define PMAC_MB_OLD_CORE99		0x00000004
+#define PMAC_MB_MOBILE			0x00000008
+#define PMAC_MB_MAY_SLEEP		0x00000010
+
+/*
+ * Feature calls supported on pmac
+ *
+ */
+
+/*
+ * Use this inline wrapper
+ */
+struct device_node;
+
+static inline long pmac_call_feature(int selector, struct device_node* node,
+					long param, long value)
+{
+	if (!ppc_md.feature_call || !machine_is(powermac))
+		return -ENODEV;
+	return ppc_md.feature_call(selector, node, param, value);
+}
+
+/* PMAC_FTR_SERIAL_ENABLE	(struct device_node* node, int param, int value)
+ * enable/disable an SCC side. Pass the node corresponding to the
+ * channel side as a parameter.
+ * param is the type of port
+ * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
+ * for use by xmon.
+ */
+#define PMAC_FTR_SCC_ENABLE		PMAC_FTR_DEF(0)
+	#define PMAC_SCC_ASYNC		0
+	#define PMAC_SCC_IRDA		1
+	#define PMAC_SCC_I2S1		2
+	#define PMAC_SCC_FLAG_XMON	0x00001000
+
+/* PMAC_FTR_MODEM_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the internal modem.
+ */
+#define PMAC_FTR_MODEM_ENABLE		PMAC_FTR_DEF(1)
+
+/* PMAC_FTR_SWIM3_ENABLE	(struct device_node* node, 0,int value)
+ * enable/disable the swim3 (floppy) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_SWIM3_ENABLE		PMAC_FTR_DEF(2)
+
+/* PMAC_FTR_MESH_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the mesh (scsi) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_MESH_ENABLE		PMAC_FTR_DEF(3)
+
+/* PMAC_FTR_IDE_ENABLE		(struct device_node* node, int busID, int value)
+ * enable/disable an IDE port of a mac-io ASIC
+ * pass the busID parameter
+ */
+#define PMAC_FTR_IDE_ENABLE		PMAC_FTR_DEF(4)
+
+/* PMAC_FTR_IDE_RESET		(struct device_node* node, int busID, int value)
+ * assert(1)/release(0) an IDE reset line (mac-io IDE only)
+ */
+#define PMAC_FTR_IDE_RESET		PMAC_FTR_DEF(5)
+
+/* PMAC_FTR_BMAC_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
+ * it's reset line
+ */
+#define PMAC_FTR_BMAC_ENABLE		PMAC_FTR_DEF(6)
+
+/* PMAC_FTR_GMAC_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
+ * control the cell's clock.
+ */
+#define PMAC_FTR_GMAC_ENABLE		PMAC_FTR_DEF(7)
+
+/* PMAC_FTR_GMAC_PHY_RESET	(struct device_node* node, 0, 0)
+ * Perform a HW reset of the PHY connected to a gmac controller.
+ * Pass the gmac device node, not the PHY node.
+ */
+#define PMAC_FTR_GMAC_PHY_RESET		PMAC_FTR_DEF(8)
+
+/* PMAC_FTR_SOUND_CHIP_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the sound chip, whatever it is and provided it can
+ * acually be controlled
+ */
+#define PMAC_FTR_SOUND_CHIP_ENABLE	PMAC_FTR_DEF(9)
+
+/* -- add various tweaks related to sound routing -- */
+
+/* PMAC_FTR_AIRPORT_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the airport card
+ */
+#define PMAC_FTR_AIRPORT_ENABLE		PMAC_FTR_DEF(10)
+
+/* PMAC_FTR_RESET_CPU		(NULL, int cpu_nr, 0)
+ * toggle the reset line of a CPU on an uninorth-based SMP machine
+ */
+#define PMAC_FTR_RESET_CPU		PMAC_FTR_DEF(11)
+
+/* PMAC_FTR_USB_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable an USB cell, along with the power of the USB "pad"
+ * on keylargo based machines
+ */
+#define PMAC_FTR_USB_ENABLE		PMAC_FTR_DEF(12)
+
+/* PMAC_FTR_1394_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the firewire cell of an uninorth ASIC.
+ */
+#define PMAC_FTR_1394_ENABLE		PMAC_FTR_DEF(13)
+
+/* PMAC_FTR_1394_CABLE_POWER	(struct device_node* node, 0, int value)
+ * enable/disable the firewire cable power supply of the uninorth
+ * firewire cell
+ */
+#define PMAC_FTR_1394_CABLE_POWER	PMAC_FTR_DEF(14)
+
+/* PMAC_FTR_SLEEP_STATE		(struct device_node* node, 0, int value)
+ * set the sleep state of the motherboard.
+ *
+ * Pass -1 as value to query for sleep capability
+ * Pass 1 to set IOs to sleep
+ * Pass 0 to set IOs to wake
+ */
+#define PMAC_FTR_SLEEP_STATE		PMAC_FTR_DEF(15)
+
+/* PMAC_FTR_GET_MB_INFO		(NULL, selector, 0)
+ *
+ * returns some motherboard infos.
+ * selector: 0  - model id
+ *           1  - model flags (capabilities)
+ *           2  - model name (cast to const char *)
+ */
+#define PMAC_FTR_GET_MB_INFO		PMAC_FTR_DEF(16)
+#define   PMAC_MB_INFO_MODEL	0
+#define   PMAC_MB_INFO_FLAGS	1
+#define   PMAC_MB_INFO_NAME	2
+
+/* PMAC_FTR_READ_GPIO		(NULL, int index, 0)
+ *
+ * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
+ * the value returned is a byte (positive), or a negative error code
+ */
+#define PMAC_FTR_READ_GPIO		PMAC_FTR_DEF(17)
+
+/* PMAC_FTR_WRITE_GPIO		(NULL, int index, int value)
+ *
+ * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
+ */
+#define PMAC_FTR_WRITE_GPIO		PMAC_FTR_DEF(18)
+
+/* PMAC_FTR_ENABLE_MPIC
+ *
+ * Enable the MPIC cell
+ */
+#define PMAC_FTR_ENABLE_MPIC		PMAC_FTR_DEF(19)
+
+/* PMAC_FTR_AACK_DELAY_ENABLE	(NULL, int enable, 0)
+ *
+ * Enable/disable the AACK delay on the northbridge for systems using DFS
+ */
+#define PMAC_FTR_AACK_DELAY_ENABLE     	PMAC_FTR_DEF(20)
+
+/* PMAC_FTR_DEVICE_CAN_WAKE
+ *
+ * Used by video drivers to inform system that they can actually perform
+ * wakeup from sleep
+ */
+#define PMAC_FTR_DEVICE_CAN_WAKE	PMAC_FTR_DEF(22)
+
+
+/* Don't use those directly, they are for the sake of pmac_setup.c */
+extern long pmac_do_feature_call(unsigned int selector, ...);
+extern void pmac_feature_init(void);
+
+/* Video suspend tweak */
+extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
+extern void pmac_call_early_video_resume(void);
+
+#define PMAC_FTR_DEF(x) ((0x6660000) | (x))
+
+/* The AGP driver registers itself here */
+extern void pmac_register_agp_pm(struct pci_dev *bridge,
+				 int (*suspend)(struct pci_dev *bridge),
+				 int (*resume)(struct pci_dev *bridge));
+
+/* Those are meant to be used by video drivers to deal with AGP
+ * suspend resume properly
+ */
+extern void pmac_suspend_agp_for_card(struct pci_dev *dev);
+extern void pmac_resume_agp_for_card(struct pci_dev *dev);
+
+/*
+ * The part below is for use by macio_asic.c only, do not rely
+ * on the data structures or constants below in a normal driver
+ *
+ */
+
+#define MAX_MACIO_CHIPS		2
+
+enum {
+	macio_unknown = 0,
+	macio_grand_central,
+	macio_ohare,
+	macio_ohareII,
+	macio_heathrow,
+	macio_gatwick,
+	macio_paddington,
+	macio_keylargo,
+	macio_pangea,
+	macio_intrepid,
+	macio_keylargo2,
+	macio_shasta,
+};
+
+struct macio_chip
+{
+	struct device_node	*of_node;
+	int			type;
+	const char		*name;
+	int			rev;
+	volatile u32		__iomem *base;
+	unsigned long		flags;
+
+	/* For use by macio_asic PCI driver */
+	struct macio_bus	lbus;
+};
+
+extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+#define MACIO_FLAG_SCCA_ON	0x00000001
+#define MACIO_FLAG_SCCB_ON	0x00000002
+#define MACIO_FLAG_SCC_LOCKED	0x00000004
+#define MACIO_FLAG_AIRPORT_ON	0x00000010
+#define MACIO_FLAG_FW_SUPPORTED	0x00000020
+
+extern struct macio_chip* macio_find(struct device_node* child, int type);
+
+#define MACIO_FCR32(macio, r)	((macio)->base + ((r) >> 2))
+#define MACIO_FCR8(macio, r)	(((volatile u8 __iomem *)((macio)->base)) + (r))
+
+#define MACIO_IN32(r)		(in_le32(MACIO_FCR32(macio,r)))
+#define MACIO_OUT32(r,v)	(out_le32(MACIO_FCR32(macio,r), (v)))
+#define MACIO_BIS(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) | (v)))
+#define MACIO_BIC(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
+#define MACIO_IN8(r)		(in_8(MACIO_FCR8(macio,r)))
+#define MACIO_OUT8(r,v)		(out_8(MACIO_FCR8(macio,r), (v)))
+
+/*
+ * Those are exported by pmac feature for internal use by arch code
+ * only like the platform function callbacks, do not use directly in drivers
+ */
+extern spinlock_t feature_lock;
+extern struct device_node *uninorth_node;
+extern u32 __iomem *uninorth_base;
+
+/*
+ * Uninorth reg. access. Note that Uni-N regs are big endian
+ */
+
+#define UN_REG(r)	(uninorth_base + ((r) >> 2))
+#define UN_IN(r)	(in_be32(UN_REG(r)))
+#define UN_OUT(r,v)	(out_be32(UN_REG(r), (v)))
+#define UN_BIS(r,v)	(UN_OUT((r), UN_IN(r) | (v)))
+#define UN_BIC(r,v)	(UN_OUT((r), UN_IN(r) & ~(v)))
+
+/* Uninorth variant:
+ *
+ * 0 = not uninorth
+ * 1 = U1.x or U2.x
+ * 3 = U3
+ * 4 = U4
+ */
+extern int pmac_get_uninorth_variant(void);
+
+#endif /* __ASM_POWERPC_PMAC_FEATURE_H */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h
new file mode 100644
index 00000000000..131011bd7e7
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_low_i2c.h
@@ -0,0 +1,107 @@
+/* 
+ *  include/asm-ppc/pmac_low_i2c.h
+ *
+ *  Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef __PMAC_LOW_I2C_H__
+#define __PMAC_LOW_I2C_H__
+#ifdef __KERNEL__
+
+/* i2c mode (based on the platform functions format) */
+enum {
+	pmac_i2c_mode_dumb	= 1,
+	pmac_i2c_mode_std	= 2,
+	pmac_i2c_mode_stdsub	= 3,
+	pmac_i2c_mode_combined	= 4,
+};
+
+/* RW bit in address */
+enum {
+	pmac_i2c_read		= 0x01,
+	pmac_i2c_write		= 0x00
+};
+
+/* i2c bus type */
+enum {
+	pmac_i2c_bus_keywest	= 0,
+	pmac_i2c_bus_pmu	= 1,
+	pmac_i2c_bus_smu	= 2,
+};
+
+/* i2c bus features */
+enum {
+	/* can_largesub : supports >1 byte subaddresses (SMU only) */
+	pmac_i2c_can_largesub	= 0x00000001u,
+
+	/* multibus : device node holds multiple busses, bus number is
+	 * encoded in bits 0xff00 of "reg" of a given device
+	 */
+	pmac_i2c_multibus	= 0x00000002u,
+};
+
+/* i2c busses in the system */
+struct pmac_i2c_bus;
+struct i2c_adapter;
+
+/* Init, called early during boot */
+extern int pmac_i2c_init(void);
+
+/* Lookup an i2c bus for a device-node. The node can be either the bus
+ * node itself or a device below it. In the case of a multibus, the bus
+ * node itself is the controller node, else, it's a child of the controller
+ * node
+ */
+extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node);
+
+/* Get the address for an i2c device. This strips the bus number if
+ * necessary. The 7 bits address is returned 1 bit right shifted so that the
+ * direction can be directly ored in
+ */
+extern u8 pmac_i2c_get_dev_addr(struct device_node *device);
+
+/* Get infos about a bus */
+extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus);
+extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
+
+/* i2c layer adapter attach/detach */
+extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
+				    struct i2c_adapter *adapter);
+extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
+				    struct i2c_adapter *adapter);
+extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
+extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
+
+/* March a device or bus with an i2c adapter structure, to be used by drivers
+ * to match device-tree nodes with i2c adapters during adapter discovery
+ * callbacks
+ */
+extern int pmac_i2c_match_adapter(struct device_node *dev,
+				  struct i2c_adapter *adapter);
+
+
+/* (legacy) Locking functions exposed to i2c-keywest */
+extern int pmac_low_i2c_lock(struct device_node *np);
+extern int pmac_low_i2c_unlock(struct device_node *np);
+
+/* Access functions for platform code */
+extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled);
+extern void pmac_i2c_close(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode);
+extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+			 u32 subaddr, u8 *data,  int len);
+
+/* Suspend/resume code called by via-pmu directly for now */
+extern void pmac_pfunc_i2c_suspend(void);
+extern void pmac_pfunc_i2c_resume(void);
+
+#endif /* __KERNEL__ */
+#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/arch/powerpc/include/asm/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h
new file mode 100644
index 00000000000..1330d6a58c5
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_pfunc.h
@@ -0,0 +1,252 @@
+#ifndef __PMAC_PFUNC_H__
+#define __PMAC_PFUNC_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+/* Flags in command lists */
+#define PMF_FLAGS_ON_INIT		0x80000000u
+#define PMF_FLGAS_ON_TERM		0x40000000u
+#define PMF_FLAGS_ON_SLEEP		0x20000000u
+#define PMF_FLAGS_ON_WAKE		0x10000000u
+#define PMF_FLAGS_ON_DEMAND		0x08000000u
+#define PMF_FLAGS_INT_GEN		0x04000000u
+#define PMF_FLAGS_HIGH_SPEED		0x02000000u
+#define PMF_FLAGS_LOW_SPEED		0x01000000u
+#define PMF_FLAGS_SIDE_EFFECTS		0x00800000u
+
+/*
+ * Arguments to a platform function call.
+ *
+ * NOTE: By convention, pointer arguments point to an u32
+ */
+struct pmf_args {
+	union {
+		u32 v;
+		u32 *p;
+	} u[4];
+	unsigned int count;
+};
+
+/*
+ * A driver capable of interpreting commands provides a handlers
+ * structure filled with whatever handlers are implemented by this
+ * driver. Non implemented handlers are left NULL.
+ *
+ * PMF_STD_ARGS are the same arguments that are passed to the parser
+ * and that gets passed back to the various handlers.
+ *
+ * Interpreting a given function always start with a begin() call which
+ * returns an instance data to be passed around subsequent calls, and
+ * ends with an end() call. This allows the low level driver to implement
+ * locking policy or per-function instance data.
+ *
+ * For interrupt capable functions, irq_enable() is called when a client
+ * registers, and irq_disable() is called when the last client unregisters
+ * Note that irq_enable & irq_disable are called within a semaphore held
+ * by the core, thus you should not try to register yourself to some other
+ * pmf interrupt during those calls.
+ */
+
+#define PMF_STD_ARGS	struct pmf_function *func, void *instdata, \
+		        struct pmf_args *args
+
+struct pmf_function;
+
+struct pmf_handlers {
+	void * (*begin)(struct pmf_function *func, struct pmf_args *args);
+	void (*end)(struct pmf_function *func, void *instdata);
+
+	int (*irq_enable)(struct pmf_function *func);
+	int (*irq_disable)(struct pmf_function *func);
+
+	int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask);
+	int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor);
+
+	int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
+	int (*read_reg32)(PMF_STD_ARGS, u32 offset);
+	int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
+	int (*read_reg16)(PMF_STD_ARGS, u32 offset);
+	int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
+	int (*read_reg8)(PMF_STD_ARGS, u32 offset);
+
+	int (*delay)(PMF_STD_ARGS, u32 duration);
+
+	int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
+	int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
+	int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
+
+	int (*read_i2c)(PMF_STD_ARGS, u32 len);
+	int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data);
+	int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen,
+		       const u8 *maskdata, const u8 *valuedata);
+
+	int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len);
+	int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data);
+	int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen,
+		       u32 totallen, const u8 *maskdata, const u8 *valuedata);
+
+	int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len);
+	int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data);
+	int (*set_i2c_mode)(PMF_STD_ARGS, int mode);
+	int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen,
+			   u32 totallen, const u8 *maskdata,
+			   const u8 *valuedata);
+
+	int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			       u32 xor);
+	int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			       u32 xor);
+	int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			      u32 xor);
+
+	int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+	int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+	int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+
+	int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata,
+				const u8 *valuedata);
+
+	struct module *owner;
+};
+
+
+/*
+ * Drivers who expose platform functions register at init time, this
+ * causes the platform functions for that device node to be parsed in
+ * advance and associated with the device. The data structures are
+ * partially public so a driver can walk the list of platform functions
+ * and eventually inspect the flags
+ */
+struct pmf_device;
+
+struct pmf_function {
+	/* All functions for a given driver are linked */
+	struct list_head	link;
+
+	/* Function node & driver data */
+	struct device_node	*node;
+	void			*driver_data;
+
+	/* For internal use by core */
+	struct pmf_device	*dev;
+
+	/* The name is the "xxx" in "platform-do-xxx", this is how
+	 * platform functions are identified by this code. Some functions
+	 * only operate for a given target, in which case the phandle is
+	 * here (or 0 if the filter doesn't apply)
+	 */
+	const char		*name;
+	u32			phandle;
+
+	/* The flags for that function. You can have several functions
+	 * with the same name and different flag
+	 */
+	u32			flags;
+
+	/* The actual tokenized function blob */
+	const void		*data;
+	unsigned int		length;
+
+	/* Interrupt clients */
+	struct list_head	irq_clients;
+
+	/* Refcounting */
+	struct kref		ref;
+};
+
+/*
+ * For platform functions that are interrupts, one can register
+ * irq_client structures. You canNOT use the same structure twice
+ * as it contains a link member. Also, the callback is called with
+ * a spinlock held, you must not call back into any of the pmf_* functions
+ * from within that callback
+ */
+struct pmf_irq_client {
+	void			(*handler)(void *data);
+	void			*data;
+	struct module		*owner;
+	struct list_head	link;
+	struct pmf_function	*func;
+};
+
+
+/*
+ * Register/Unregister a function-capable driver and its handlers
+ */
+extern int pmf_register_driver(struct device_node *np,
+			      struct pmf_handlers *handlers,
+			      void *driverdata);
+
+extern void pmf_unregister_driver(struct device_node *np);
+
+
+/*
+ * Register/Unregister interrupt clients
+ */
+extern int pmf_register_irq_client(struct device_node *np,
+				   const char *name,
+				   struct pmf_irq_client *client);
+
+extern void pmf_unregister_irq_client(struct pmf_irq_client *client);
+
+/*
+ * Called by the handlers when an irq happens
+ */
+extern void pmf_do_irq(struct pmf_function *func);
+
+
+/*
+ * Low level call to platform functions.
+ *
+ * The phandle can filter on the target object for functions that have
+ * multiple targets, the flags allow you to restrict the call to a given
+ * combination of flags.
+ *
+ * The args array contains as many arguments as is required by the function,
+ * this is dependent on the function you are calling, unfortunately Apple
+ * mechanism provides no way to encode that so you have to get it right at
+ * the call site. Some functions require no args, in which case, you can
+ * pass NULL.
+ *
+ * You can also pass NULL to the name. This will match any function that has
+ * the appropriate combination of flags & phandle or you can pass 0 to the
+ * phandle to match any
+ */
+extern int pmf_do_functions(struct device_node *np, const char *name,
+			    u32 phandle, u32 flags, struct pmf_args *args);
+
+
+
+/*
+ * High level call to a platform function.
+ *
+ * This one looks for the platform-xxx first so you should call it to the
+ * actual target if any. It will fallback to platform-do-xxx if it can't
+ * find one. It will also exclusively target functions that have
+ * the "OnDemand" flag.
+ */
+
+extern int pmf_call_function(struct device_node *target, const char *name,
+			     struct pmf_args *args);
+
+
+/*
+ * For low latency interrupt usage, you can lookup for on-demand functions
+ * using the functions below
+ */
+
+extern struct pmf_function *pmf_find_function(struct device_node *target,
+					      const char *name);
+
+extern struct pmf_function * pmf_get_function(struct pmf_function *func);
+extern void pmf_put_function(struct pmf_function *func);
+
+extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args);
+
+
+/* Suspend/resume code called by via-pmu directly for now */
+extern void pmac_pfunc_base_suspend(void);
+extern void pmac_pfunc_base_resume(void);
+
+#endif /* __PMAC_PFUNC_H__ */
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
new file mode 100644
index 00000000000..d6a616a1b3e
--- /dev/null
+++ b/arch/powerpc/include/asm/pmc.h
@@ -0,0 +1,37 @@
+/*
+ * pmc.h
+ * Copyright (C) 2004  David Gibson, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _POWERPC_PMC_H
+#define _POWERPC_PMC_H
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+typedef void (*perf_irq_t)(struct pt_regs *);
+extern perf_irq_t perf_irq;
+
+int reserve_pmc_hardware(perf_irq_t new_perf_irq);
+void release_pmc_hardware(void);
+
+#ifdef CONFIG_PPC64
+void power4_enable_pmcs(void);
+void pasemi_enable_pmcs(void);
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PMC_H */
diff --git a/arch/powerpc/include/asm/pmi.h b/arch/powerpc/include/asm/pmi.h
new file mode 100644
index 00000000000..b4e91fbf508
--- /dev/null
+++ b/arch/powerpc/include/asm/pmi.h
@@ -0,0 +1,66 @@
+#ifndef _POWERPC_PMI_H
+#define _POWERPC_PMI_H
+
+/*
+ * Definitions for talking with PMI device on PowerPC
+ *
+ * PMI (Platform Management Interrupt) is a way to communicate
+ * with the BMC (Baseboard Management Controller) via interrupts.
+ * Unlike IPMI it is bidirectional and has a low latency.
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __KERNEL__
+
+#define PMI_TYPE_FREQ_CHANGE	0x01
+#define PMI_TYPE_POWER_BUTTON	0x02
+#define PMI_READ_TYPE		0
+#define PMI_READ_DATA0		1
+#define PMI_READ_DATA1		2
+#define PMI_READ_DATA2		3
+#define PMI_WRITE_TYPE		4
+#define PMI_WRITE_DATA0		5
+#define PMI_WRITE_DATA1		6
+#define PMI_WRITE_DATA2		7
+
+#define PMI_ACK			0x80
+
+#define PMI_TIMEOUT		100
+
+typedef struct {
+	u8	type;
+	u8	data0;
+	u8	data1;
+	u8	data2;
+} pmi_message_t;
+
+struct pmi_handler {
+	struct list_head node;
+	u8 type;
+	void (*handle_pmi_message) (pmi_message_t);
+};
+
+int pmi_register_handler(struct pmi_handler *);
+void pmi_unregister_handler(struct pmi_handler *);
+
+int pmi_send_message(pmi_message_t);
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PMI_H */
diff --git a/arch/powerpc/include/asm/poll.h b/arch/powerpc/include/asm/poll.h
new file mode 100644
index 00000000000..c98509d3149
--- /dev/null
+++ b/arch/powerpc/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/powerpc/include/asm/posix_types.h b/arch/powerpc/include/asm/posix_types.h
new file mode 100644
index 00000000000..c4e396b540d
--- /dev/null
+++ b/arch/powerpc/include/asm/posix_types.h
@@ -0,0 +1,128 @@
+#ifndef _ASM_POWERPC_POSIX_TYPES_H
+#define _ASM_POWERPC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef long		__kernel_suseconds_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef unsigned int	__kernel_old_uid_t;
+typedef unsigned int	__kernel_old_gid_t;
+
+#ifdef __powerpc64__
+typedef unsigned long  	__kernel_nlink_t;
+typedef int             __kernel_ipc_pid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef unsigned long	__kernel_old_dev_t;
+#else
+typedef unsigned short	__kernel_nlink_t;
+typedef short		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef unsigned int	__kernel_old_dev_t;
+#endif
+
+#ifdef __powerpc64__
+typedef long long	__kernel_loff_t;
+#else
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = (unsigned long *)p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+
+		      case 8:
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+#endif /* __GNUC__ */
+#endif /* _ASM_POWERPC_POSIX_TYPES_H */
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
new file mode 100644
index 00000000000..854ab713f56
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -0,0 +1,149 @@
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PPC_PCI_H
+#define _ASM_POWERPC_PPC_PCI_H
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+
+extern unsigned long isa_io_base;
+
+extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
+extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
+
+
+extern struct list_head hose_list;
+
+extern void find_and_init_phbs(void);
+
+extern struct pci_dev *isa_bridge_pcidev;	/* may be NULL if no ISA bus */
+
+/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
+#define BUID_HI(buid) ((buid) >> 32)
+#define BUID_LO(buid) ((buid) & 0xffffffff)
+
+/* PCI device_node operations */
+struct device_node;
+typedef void *(*traverse_func)(struct device_node *me, void *data);
+void *traverse_pci_devices(struct device_node *start, traverse_func pre,
+		void *data);
+
+extern void pci_devs_phb_init(void);
+extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+extern void scan_phb(struct pci_controller *hose);
+
+/* From rtas_pci.h */
+extern void init_pci_config_tokens (void);
+extern unsigned long get_phb_buid (struct device_node *);
+extern int rtas_setup_phb(struct pci_controller *phb);
+
+extern unsigned long pci_probe_only;
+
+/* ---- EEH internal-use-only related routines ---- */
+#ifdef CONFIG_EEH
+
+void pci_addr_cache_insert_device(struct pci_dev *dev);
+void pci_addr_cache_remove_device(struct pci_dev *dev);
+void pci_addr_cache_build(void);
+struct pci_dev *pci_get_device_by_addr(unsigned long addr);
+
+/**
+ * eeh_slot_error_detail -- record and EEH error condition to the log
+ * @pdn:      pci device node
+ * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
+ *
+ * Obtains the EEH error details from the RTAS subsystem,
+ * and then logs these details with the RTAS error log system.
+ */
+#define EEH_LOG_TEMP_FAILURE 1
+#define EEH_LOG_PERM_FAILURE 2
+void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
+
+/**
+ * rtas_pci_enable - enable IO transfers for this slot
+ * @pdn:       pci device node
+ * @function:  either EEH_THAW_MMIO or EEH_THAW_DMA 
+ *
+ * Enable I/O transfers to this slot 
+ */
+#define EEH_THAW_MMIO 2
+#define EEH_THAW_DMA  3
+int rtas_pci_enable(struct pci_dn *pdn, int function);
+
+/**
+ * rtas_set_slot_reset -- unfreeze a frozen slot
+ * @pdn:       pci device node
+ *
+ * Clear the EEH-frozen condition on a slot.  This routine
+ * does this by asserting the PCI #RST line for 1/8th of
+ * a second; this routine will sleep while the adapter is
+ * being reset.
+ *
+ * Returns a non-zero value if the reset failed.
+ */
+int rtas_set_slot_reset (struct pci_dn *);
+int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
+
+/** 
+ * eeh_restore_bars - Restore device configuration info.
+ * @pdn:       pci device node
+ *
+ * A reset of a PCI device will clear out its config space.
+ * This routines will restore the config space for this
+ * device, and is children, to values previously obtained
+ * from the firmware.
+ */
+void eeh_restore_bars(struct pci_dn *);
+
+/**
+ * rtas_configure_bridge -- firmware initialization of pci bridge
+ * @pdn:       pci device node
+ *
+ * Ask the firmware to configure all PCI bridges devices
+ * located behind the indicated node. Required after a
+ * pci device reset. Does essentially the same hing as
+ * eeh_restore_bars, but for brdges, and lets firmware 
+ * do the work.
+ */
+void rtas_configure_bridge(struct pci_dn *);
+
+int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
+int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
+
+/**
+ * eeh_mark_slot -- set mode flags for pertition endpoint
+ * @pdn:       pci device node
+ *
+ * mark and clear slots: find "partition endpoint" PE and set or 
+ * clear the flags for each subnode of the PE.
+ */
+void eeh_mark_slot (struct device_node *dn, int mode_flag);
+void eeh_clear_slot (struct device_node *dn, int mode_flag);
+
+/**
+ * find_device_pe -- Find the associated "Partiationable Endpoint" PE
+ * @pdn:       pci device node
+ */
+struct device_node * find_device_pe(struct device_node *dn);
+
+void eeh_sysfs_add_device(struct pci_dev *pdev);
+void eeh_sysfs_remove_device(struct pci_dev *pdev);
+
+#endif /* CONFIG_EEH */
+
+#else /* CONFIG_PCI */
+static inline void find_and_init_phbs(void) { }
+static inline void init_pci_config_tokens(void) { }
+#endif /* !CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PPC_PCI_H */
diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
new file mode 100644
index 00000000000..033039a80c4
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc4xx.h
@@ -0,0 +1,18 @@
+/*
+ * PPC4xx Prototypes and definitions
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_PPC4xx_H__
+#define __ASM_POWERPC_PPC4xx_H__
+
+extern void ppc4xx_reset_system(char *cmd);
+
+#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
new file mode 100644
index 00000000000..0966899d974
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -0,0 +1,689 @@
+/*
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ */
+#ifndef _ASM_POWERPC_PPC_ASM_H
+#define _ASM_POWERPC_PPC_ASM_H
+
+#include <linux/stringify.h>
+#include <asm/asm-compat.h>
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#error __FILE__ should only be used in assembler files
+#else
+
+#define SZL			(BITS_PER_LONG/8)
+
+/*
+ * Stuff for accurate CPU time accounting.
+ * These macros handle transitions between user and system state
+ * in exception entry and exit and accumulate time to the
+ * user_time and system_time fields in the paca.
+ */
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
+#define ACCOUNT_CPU_USER_EXIT(ra, rb)
+#else
+#define ACCOUNT_CPU_USER_ENTRY(ra, rb)					\
+	beq	2f;			/* if from kernel mode */	\
+BEGIN_FTR_SECTION;							\
+	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
+BEGIN_FTR_SECTION;							\
+	MFTB(ra);			/* or get TB if no PURR */	\
+END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
+	ld	rb,PACA_STARTPURR(r13);					\
+	std	ra,PACA_STARTPURR(r13);					\
+	subf	rb,rb,ra;		/* subtract start value */	\
+	ld	ra,PACA_USER_TIME(r13);					\
+	add	ra,ra,rb;		/* add on to user time */	\
+	std	ra,PACA_USER_TIME(r13);					\
+2:
+
+#define ACCOUNT_CPU_USER_EXIT(ra, rb)					\
+BEGIN_FTR_SECTION;							\
+	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
+BEGIN_FTR_SECTION;							\
+	MFTB(ra);			/* or get TB if no PURR */	\
+END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
+	ld	rb,PACA_STARTPURR(r13);					\
+	std	ra,PACA_STARTPURR(r13);					\
+	subf	rb,rb,ra;		/* subtract start value */	\
+	ld	ra,PACA_SYSTEM_TIME(r13);				\
+	add	ra,ra,rb;		/* add on to user time */	\
+	std	ra,PACA_SYSTEM_TIME(r13);
+#endif
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#ifdef __powerpc64__
+#define SAVE_GPR(n, base)	std	n,GPR0+8*(n)(base)
+#define REST_GPR(n, base)	ld	n,GPR0+8*(n)(base)
+#define SAVE_NVGPRS(base)	SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_8GPRS(14, base); REST_10GPRS(22, base)
+#else
+#define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
+#define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
+#define SAVE_NVGPRS(base)	SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
+				SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_GPR(13, base); REST_8GPRS(14, base); \
+				REST_10GPRS(22, base)
+#endif
+
+/*
+ * Define what the VSX XX1 form instructions will look like, then add
+ * the 128 bit load store instructions based on that.
+ */
+#define VSX_XX1(xs, ra, rb)	(((xs) & 0x1f) << 21 | ((ra) << 16) |  \
+				 ((rb) << 11) | (((xs) >> 5)))
+
+#define STXVD2X(xs, ra, rb)	.long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
+#define LXVD2X(xs, ra, rb)	.long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
+
+#define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
+#define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
+#define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
+#define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
+#define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
+#define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
+#define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
+#define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
+#define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
+#define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
+
+/* Save the lower 32 VSRs in the thread VSR region */
+#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,b,base)
+#define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
+#define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
+#define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
+#define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
+#define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
+#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
+#define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
+#define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
+#define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
+#define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
+#define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
+/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
+#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,b,base)
+#define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
+#define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
+#define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
+#define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
+#define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
+#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
+#define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
+#define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
+#define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
+#define REST_16VSRSU(n,b,base)	REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
+#define REST_32VSRSU(n,b,base)	REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
+
+#define SAVE_EVR(n,s,base)	evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
+#define SAVE_2EVRS(n,s,base)	SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
+#define SAVE_4EVRS(n,s,base)	SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base)
+#define SAVE_8EVRS(n,s,base)	SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base)
+#define SAVE_16EVRS(n,s,base)	SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base)
+#define SAVE_32EVRS(n,s,base)	SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base)
+#define REST_EVR(n,s,base)	lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n
+#define REST_2EVRS(n,s,base)	REST_EVR(n,s,base); REST_EVR(n+1,s,base)
+#define REST_4EVRS(n,s,base)	REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base)
+#define REST_8EVRS(n,s,base)	REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base)
+#define REST_16EVRS(n,s,base)	REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base)
+#define REST_32EVRS(n,s,base)	REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base)
+
+/* Macros to adjust thread priority for hardware multithreading */
+#define HMT_VERY_LOW	or	31,31,31	# very low priority
+#define HMT_LOW		or	1,1,1
+#define HMT_MEDIUM_LOW  or	6,6,6		# medium low priority
+#define HMT_MEDIUM	or	2,2,2
+#define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
+#define HMT_HIGH	or	3,3,3
+
+/* handle instructions that older assemblers may not know */
+#define RFCI		.long 0x4c000066	/* rfci instruction */
+#define RFDI		.long 0x4c00004e	/* rfdi instruction */
+#define RFMCI		.long 0x4c00004c	/* rfmci instruction */
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
+
+#define _GLOBAL(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _INIT_GLOBAL(name) \
+	.section ".text.init.refok"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _KPROBE(name) \
+	.section ".kprobes.text","a"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _STATIC(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _INIT_STATIC(name) \
+	.section ".text.init.refok"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#else /* 32-bit */
+
+#define _ENTRY(n)	\
+	.globl n;	\
+n:
+
+#define _GLOBAL(n)	\
+	.text;		\
+	.stabs __stringify(n:F-1),N_FUN,0,0,n;\
+	.globl n;	\
+n:
+
+#define _KPROBE(n)	\
+	.section ".kprobes.text","a";	\
+	.globl	n;	\
+n:
+
+#endif
+
+/* 
+ * LOAD_REG_IMMEDIATE(rn, expr)
+ *   Loads the value of the constant expression 'expr' into register 'rn'
+ *   using immediate instructions only.  Use this when it's important not
+ *   to reference other data (i.e. on ppc64 when the TOC pointer is not
+ *   valid).
+ *
+ * LOAD_REG_ADDR(rn, name)
+ *   Loads the address of label 'name' into register 'rn'.  Use this when
+ *   you don't particularly need immediate instructions only, but you need
+ *   the whole address in one register (e.g. it's a structure address and
+ *   you want to access various offsets within it).  On ppc32 this is
+ *   identical to LOAD_REG_IMMEDIATE.
+ *
+ * LOAD_REG_ADDRBASE(rn, name)
+ * ADDROFF(name)
+ *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
+ *   register 'rn'.  ADDROFF(name) returns the remainder of the address as
+ *   a constant expression.  ADDROFF(name) is a signed expression < 16 bits
+ *   in size, so is suitable for use directly as an offset in load and store
+ *   instructions.  Use this when loading/storing a single word or less as:
+ *      LOAD_REG_ADDRBASE(rX, name)
+ *      ld	rY,ADDROFF(name)(rX)
+ */
+#ifdef __powerpc64__
+#define LOAD_REG_IMMEDIATE(reg,expr)		\
+	lis     (reg),(expr)@highest;		\
+	ori     (reg),(reg),(expr)@higher;	\
+	rldicr  (reg),(reg),32,31;		\
+	oris    (reg),(reg),(expr)@h;		\
+	ori     (reg),(reg),(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name)			\
+	ld	(reg),name@got(r2)
+
+#define LOAD_REG_ADDRBASE(reg,name)	LOAD_REG_ADDR(reg,name)
+#define ADDROFF(name)			0
+
+/* offsets for stack frame layout */
+#define LRSAVE	16
+
+#else /* 32-bit */
+
+#define LOAD_REG_IMMEDIATE(reg,expr)		\
+	lis	(reg),(expr)@ha;		\
+	addi	(reg),(reg),(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name)		LOAD_REG_IMMEDIATE(reg, name)
+
+#define LOAD_REG_ADDRBASE(reg, name)	lis	(reg),name@ha
+#define ADDROFF(name)			name@l
+
+/* offsets for stack frame layout */
+#define LRSAVE	4
+
+#endif
+
+/* various errata or part fixups */
+#ifdef CONFIG_PPC601_SYNC_FIX
+#define SYNC				\
+BEGIN_FTR_SECTION			\
+	sync;				\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define SYNC_601			\
+BEGIN_FTR_SECTION			\
+	sync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define ISYNC_601			\
+BEGIN_FTR_SECTION			\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#else
+#define	SYNC
+#define SYNC_601
+#define ISYNC_601
+#endif
+
+#ifdef CONFIG_PPC_CELL
+#define MFTB(dest)			\
+90:	mftb  dest;			\
+BEGIN_FTR_SECTION_NESTED(96);		\
+	cmpwi dest,0;			\
+	beq-  90b;			\
+END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#else
+#define MFTB(dest)			mftb dest
+#endif
+
+#ifndef CONFIG_SMP
+#define TLBSYNC
+#else /* CONFIG_SMP */
+/* tlbsync is not implemented on 601 */
+#define TLBSYNC				\
+BEGIN_FTR_SECTION			\
+	tlbsync;			\
+	sync;				\
+END_FTR_SECTION_IFCLR(CPU_FTR_601)
+#endif
+
+	
+/*
+ * This instruction is not implemented on the PPC 603 or 601; however, on
+ * the 403GCX and 405GP tlbia IS defined and tlbie is not.
+ * All of these instructions exist in the 8xx, they have magical powers,
+ * and they must be used.
+ */
+
+#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
+#define tlbia					\
+	li	r4,1024;			\
+	mtctr	r4;				\
+	lis	r4,KERNELBASE@h;		\
+0:	tlbie	r4;				\
+	addi	r4,r4,0x1000;			\
+	bdnz	0b
+#endif
+
+
+#ifdef CONFIG_IBM440EP_ERR42
+#define PPC440EP_ERR42 isync
+#else
+#define PPC440EP_ERR42
+#endif
+
+
+#if defined(CONFIG_BOOKE)
+#define toreal(rd)
+#define fromreal(rd)
+
+/*
+ * We use addis to ensure compatibility with the "classic" ppc versions of
+ * these macros, which use rs = 0 to get the tophys offset in rd, rather than
+ * converting the address in r0, and so this version has to do that too
+ * (i.e. set register rd to 0 when rs == 0).
+ */
+#define tophys(rd,rs)				\
+	addis	rd,rs,0
+
+#define tovirt(rd,rs)				\
+	addis	rd,rs,0
+
+#elif defined(CONFIG_PPC64)
+#define toreal(rd)		/* we can access c000... in real mode */
+#define fromreal(rd)
+
+#define tophys(rd,rs)                           \
+	clrldi	rd,rs,2
+
+#define tovirt(rd,rs)                           \
+	rotldi	rd,rs,16;			\
+	ori	rd,rd,((KERNELBASE>>48)&0xFFFF);\
+	rotldi	rd,rd,48
+#else
+/*
+ * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
+ * physical base address of RAM at compile time.
+ */
+#define toreal(rd)	tophys(rd,rd)
+#define fromreal(rd)	tovirt(rd,rd)
+
+#define tophys(rd,rs)				\
+0:	addis	rd,rs,-KERNELBASE@h;		\
+	.section ".vtop_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+
+#define tovirt(rd,rs)				\
+0:	addis	rd,rs,KERNELBASE@h;		\
+	.section ".ptov_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+#endif
+
+#ifdef CONFIG_PPC64
+#define RFI		rfid
+#define MTMSRD(r)	mtmsrd	r
+
+#else
+#define FIX_SRR1(ra, rb)
+#ifndef CONFIG_40x
+#define	RFI		rfi
+#else
+#define RFI		rfi; b .	/* Prevent prefetch past rfi */
+#endif
+#define MTMSRD(r)	mtmsr	r
+#define CLR_TOP32(r)
+#endif
+
+#endif /* __KERNEL__ */
+
+/* The boring bits... */
+
+/* Condition Register Bit Fields */
+
+#define	cr0	0
+#define	cr1	1
+#define	cr2	2
+#define	cr3	3
+#define	cr4	4
+#define	cr5	5
+#define	cr6	6
+#define	cr7	7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define	r0	0
+#define	r1	1
+#define	r2	2
+#define	r3	3
+#define	r4	4
+#define	r5	5
+#define	r6	6
+#define	r7	7
+#define	r8	8
+#define	r9	9
+#define	r10	10
+#define	r11	11
+#define	r12	12
+#define	r13	13
+#define	r14	14
+#define	r15	15
+#define	r16	16
+#define	r17	17
+#define	r18	18
+#define	r19	19
+#define	r20	20
+#define	r21	21
+#define	r22	22
+#define	r23	23
+#define	r24	24
+#define	r25	25
+#define	r26	26
+#define	r27	27
+#define	r28	28
+#define	r29	29
+#define	r30	30
+#define	r31	31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define	fr0	0
+#define	fr1	1
+#define	fr2	2
+#define	fr3	3
+#define	fr4	4
+#define	fr5	5
+#define	fr6	6
+#define	fr7	7
+#define	fr8	8
+#define	fr9	9
+#define	fr10	10
+#define	fr11	11
+#define	fr12	12
+#define	fr13	13
+#define	fr14	14
+#define	fr15	15
+#define	fr16	16
+#define	fr17	17
+#define	fr18	18
+#define	fr19	19
+#define	fr20	20
+#define	fr21	21
+#define	fr22	22
+#define	fr23	23
+#define	fr24	24
+#define	fr25	25
+#define	fr26	26
+#define	fr27	27
+#define	fr28	28
+#define	fr29	29
+#define	fr30	30
+#define	fr31	31
+
+/* AltiVec Registers (VPRs) */
+
+#define	vr0	0
+#define	vr1	1
+#define	vr2	2
+#define	vr3	3
+#define	vr4	4
+#define	vr5	5
+#define	vr6	6
+#define	vr7	7
+#define	vr8	8
+#define	vr9	9
+#define	vr10	10
+#define	vr11	11
+#define	vr12	12
+#define	vr13	13
+#define	vr14	14
+#define	vr15	15
+#define	vr16	16
+#define	vr17	17
+#define	vr18	18
+#define	vr19	19
+#define	vr20	20
+#define	vr21	21
+#define	vr22	22
+#define	vr23	23
+#define	vr24	24
+#define	vr25	25
+#define	vr26	26
+#define	vr27	27
+#define	vr28	28
+#define	vr29	29
+#define	vr30	30
+#define	vr31	31
+
+/* VSX Registers (VSRs) */
+
+#define	vsr0	0
+#define	vsr1	1
+#define	vsr2	2
+#define	vsr3	3
+#define	vsr4	4
+#define	vsr5	5
+#define	vsr6	6
+#define	vsr7	7
+#define	vsr8	8
+#define	vsr9	9
+#define	vsr10	10
+#define	vsr11	11
+#define	vsr12	12
+#define	vsr13	13
+#define	vsr14	14
+#define	vsr15	15
+#define	vsr16	16
+#define	vsr17	17
+#define	vsr18	18
+#define	vsr19	19
+#define	vsr20	20
+#define	vsr21	21
+#define	vsr22	22
+#define	vsr23	23
+#define	vsr24	24
+#define	vsr25	25
+#define	vsr26	26
+#define	vsr27	27
+#define	vsr28	28
+#define	vsr29	29
+#define	vsr30	30
+#define	vsr31	31
+#define	vsr32	32
+#define	vsr33	33
+#define	vsr34	34
+#define	vsr35	35
+#define	vsr36	36
+#define	vsr37	37
+#define	vsr38	38
+#define	vsr39	39
+#define	vsr40	40
+#define	vsr41	41
+#define	vsr42	42
+#define	vsr43	43
+#define	vsr44	44
+#define	vsr45	45
+#define	vsr46	46
+#define	vsr47	47
+#define	vsr48	48
+#define	vsr49	49
+#define	vsr50	50
+#define	vsr51	51
+#define	vsr52	52
+#define	vsr53	53
+#define	vsr54	54
+#define	vsr55	55
+#define	vsr56	56
+#define	vsr57	57
+#define	vsr58	58
+#define	vsr59	59
+#define	vsr60	60
+#define	vsr61	61
+#define	vsr62	62
+#define	vsr63	63
+
+/* SPE Registers (EVPRs) */
+
+#define	evr0	0
+#define	evr1	1
+#define	evr2	2
+#define	evr3	3
+#define	evr4	4
+#define	evr5	5
+#define	evr6	6
+#define	evr7	7
+#define	evr8	8
+#define	evr9	9
+#define	evr10	10
+#define	evr11	11
+#define	evr12	12
+#define	evr13	13
+#define	evr14	14
+#define	evr15	15
+#define	evr16	16
+#define	evr17	17
+#define	evr18	18
+#define	evr19	19
+#define	evr20	20
+#define	evr21	21
+#define	evr22	22
+#define	evr23	23
+#define	evr24	24
+#define	evr25	25
+#define	evr26	26
+#define	evr27	27
+#define	evr28	28
+#define	evr29	29
+#define	evr30	30
+#define	evr31	31
+
+/* some stab codes */
+#define N_FUN	36
+#define N_RSYM	64
+#define N_SLINE	68
+#define N_SO	100
+
+#endif /*  __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PPC_ASM_H */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
new file mode 100644
index 00000000000..101ed87f7d8
--- /dev/null
+++ b/arch/powerpc/include/asm/processor.h
@@ -0,0 +1,314 @@
+#ifndef _ASM_POWERPC_PROCESSOR_H
+#define _ASM_POWERPC_PROCESSOR_H
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/reg.h>
+
+#ifdef CONFIG_VSX
+#define TS_FPRWIDTH 2
+#else
+#define TS_FPRWIDTH 1
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+/* We do _not_ want to define new machine types at all, those must die
+ * in favor of using the device-tree
+ * -- BenH.
+ */
+
+/* PREP sub-platform types see residual.h for these */
+#define _PREP_Motorola	0x01	/* motorola prep */
+#define _PREP_Firm	0x02	/* firmworks prep */
+#define _PREP_IBM	0x00	/* ibm prep */
+#define _PREP_Bull	0x03	/* bull prep */
+
+/* CHRP sub-platform types. These are arbitrary */
+#define _CHRP_Motorola	0x04	/* motorola chrp, the cobra */
+#define _CHRP_IBM	0x05	/* IBM chrp, the longtrail and longtrail 2 */
+#define _CHRP_Pegasos	0x06	/* Genesi/bplan's Pegasos and Pegasos2 */
+#define _CHRP_briq	0x07	/* TotalImpact's briQ */
+
+#if defined(__KERNEL__) && defined(CONFIG_PPC32)
+
+extern int _chrp_type;
+
+#ifdef CONFIG_PPC_PREP
+
+/* what kind of prep workstation we are */
+extern int _prep_type;
+
+#endif /* CONFIG_PPC_PREP */
+
+#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+/* Macros for adjusting thread priority (hardware multi-threading) */
+#define HMT_very_low()   asm volatile("or 31,31,31   # very low priority")
+#define HMT_low()	 asm volatile("or 1,1,1	     # low priority")
+#define HMT_medium_low() asm volatile("or 6,6,6      # medium low priority")
+#define HMT_medium()	 asm volatile("or 2,2,2	     # medium priority")
+#define HMT_medium_high() asm volatile("or 5,5,5      # medium high priority")
+#define HMT_high()	 asm volatile("or 3,3,3	     # high priority")
+
+#ifdef __KERNEL__
+
+extern int have_of;
+
+struct task_struct;
+void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
+void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/* Create a new kernel thread. */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Lazy FPU handling on uni-processor */
+extern struct task_struct *last_task_used_math;
+extern struct task_struct *last_task_used_altivec;
+extern struct task_struct *last_task_used_vsx;
+extern struct task_struct *last_task_used_spe;
+
+#ifdef CONFIG_PPC32
+
+#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
+#error User TASK_SIZE overlaps with KERNEL_START address
+#endif
+#define TASK_SIZE	(CONFIG_TASK_SIZE)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
+#endif
+
+#ifdef CONFIG_PPC64
+/* 64-bit user address space is 44-bits (16TB user VM) */
+#define TASK_SIZE_USER64 (0x0000100000000000UL)
+
+/* 
+ * 32-bit user address space is 4GB - 1 page 
+ * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
+ */
+#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE))
+
+#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
+		TASK_SIZE_USER32 : TASK_SIZE_USER64)
+#define TASK_SIZE	  TASK_SIZE_OF(current)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
+#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4))
+
+#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \
+		TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
+#endif
+
+#ifdef __KERNEL__
+#ifdef __powerpc64__
+
+#define STACK_TOP_USER64 TASK_SIZE_USER64
+#define STACK_TOP_USER32 TASK_SIZE_USER32
+
+#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
+		   STACK_TOP_USER32 : STACK_TOP_USER64)
+
+#define STACK_TOP_MAX STACK_TOP_USER64
+
+#else /* __powerpc64__ */
+
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+#endif /* __powerpc64__ */
+#endif /* __KERNEL__ */
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define TS_FPROFFSET 0
+#define TS_VSRLOWOFFSET 1
+#define TS_FPR(i) fpr[i][TS_FPROFFSET]
+
+struct thread_struct {
+	unsigned long	ksp;		/* Kernel stack pointer */
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+
+#ifdef CONFIG_PPC64
+	unsigned long	ksp_vsid;
+#endif
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+	mm_segment_t	fs;		/* for get_fs() validation */
+#ifdef CONFIG_PPC32
+	void		*pgdir;		/* root of page-table tree */
+#endif
+#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
+	unsigned long	dbcr0;		/* debug control register values */
+	unsigned long	dbcr1;
+#endif
+	/* FP and VSX 0-31 register set */
+	double		fpr[32][TS_FPRWIDTH];
+	struct {
+
+		unsigned int pad;
+		unsigned int val;	/* Floating point status */
+	} fpscr;
+	int		fpexc_mode;	/* floating-point exception mode */
+	unsigned int	align_ctl;	/* alignment handling control */
+#ifdef CONFIG_PPC64
+	unsigned long	start_tb;	/* Start purr when proc switched in */
+	unsigned long	accum_tb;	/* Total accumilated purr for process */
+#endif
+	unsigned long	dabr;		/* Data address breakpoint register */
+#ifdef CONFIG_ALTIVEC
+	/* Complete AltiVec register set */
+	vector128	vr[32] __attribute__((aligned(16)));
+	/* AltiVec status */
+	vector128	vscr __attribute__((aligned(16)));
+	unsigned long	vrsave;
+	int		used_vr;	/* set if process has used altivec */
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	/* VSR status */
+	int		used_vsr;	/* set if process has used altivec */
+#endif /* CONFIG_VSX */
+#ifdef CONFIG_SPE
+	unsigned long	evr[32];	/* upper 32-bits of SPE regs */
+	u64		acc;		/* Accumulator */
+	unsigned long	spefscr;	/* SPE & eFP status */
+	int		used_spe;	/* set if process has used spe */
+#endif /* CONFIG_SPE */
+};
+
+#define ARCH_MIN_TASKALIGN 16
+
+#define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
+#define INIT_SP_LIMIT \
+	(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
+
+
+#ifdef CONFIG_PPC32
+#define INIT_THREAD { \
+	.ksp = INIT_SP, \
+	.ksp_limit = INIT_SP_LIMIT, \
+	.fs = KERNEL_DS, \
+	.pgdir = swapper_pg_dir, \
+	.fpexc_mode = MSR_FE0 | MSR_FE1, \
+}
+#else
+#define INIT_THREAD  { \
+	.ksp = INIT_SP, \
+	.ksp_limit = INIT_SP_LIMIT, \
+	.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
+	.fs = KERNEL_DS, \
+	.fpr = {{0}}, \
+	.fpscr = { .val = 0, }, \
+	.fpexc_mode = 0, \
+}
+#endif
+
+/*
+ * Return saved PC of a blocked thread. For now, this is the "user" PC
+ */
+#define thread_saved_pc(tsk)    \
+        ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+
+#define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.regs)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+#define KSTK_ESP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
+
+/* Get/set floating-point exception mode */
+#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr))
+#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val))
+
+extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
+extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
+
+#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr))
+#define SET_ENDIAN(tsk, val) set_endian((tsk), (val))
+
+extern int get_endian(struct task_struct *tsk, unsigned long adr);
+extern int set_endian(struct task_struct *tsk, unsigned int val);
+
+#define GET_UNALIGN_CTL(tsk, adr)	get_unalign_ctl((tsk), (adr))
+#define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val))
+
+extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
+extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
+
+static inline unsigned int __unpack_fe01(unsigned long msr_bits)
+{
+	return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
+}
+
+static inline unsigned long __pack_fe01(unsigned int fpmode)
+{
+	return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1);
+}
+
+#ifdef CONFIG_PPC64
+#define cpu_relax()	do { HMT_low(); HMT_medium(); barrier(); } while (0)
+#else
+#define cpu_relax()	barrier()
+#endif
+
+/* Check that a certain kernel stack pointer is valid in task_struct p */
+int validate_sp(unsigned long sp, struct task_struct *p,
+                       unsigned long nbytes);
+
+/*
+ * Prefetch macros.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	if (unlikely(!x))
+		return;
+
+	__asm__ __volatile__ ("dcbt 0,%0" : : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+	if (unlikely(!x))
+		return;
+
+	__asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+#ifdef CONFIG_PPC64
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
new file mode 100644
index 00000000000..eb3bd2e1c7f
--- /dev/null
+++ b/arch/powerpc/include/asm/prom.h
@@ -0,0 +1,356 @@
+#ifndef _POWERPC_PROM_H
+#define _POWERPC_PROM_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
+
+#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
+#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
+#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed	/* marker */
+#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
+#define OF_DT_END_NODE		0x2		/* End node */
+#define OF_DT_PROP		0x3		/* Property: name off, size,
+						 * content */
+#define OF_DT_NOP		0x4		/* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header
+{
+	u32	magic;			/* magic word OF_DT_HEADER */
+	u32	totalsize;		/* total size of DT block */
+	u32	off_dt_struct;		/* offset to structure */
+	u32	off_dt_strings;		/* offset to strings */
+	u32	off_mem_rsvmap;		/* offset to memory reserve map */
+	u32	version;		/* format version */
+	u32	last_comp_version;	/* last compatible version */
+	/* version 2 fields below */
+	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
+	/* version 3 fields below */
+	u32	dt_strings_size;	/* size of the DT strings block */
+	/* version 17 fields below */
+	u32	dt_struct_size;		/* size of the DT structure block */
+};
+
+
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+};
+
+struct device_node {
+	const char *name;
+	const char *type;
+	phandle	node;
+	phandle linux_phandle;
+	char	*full_name;
+
+	struct	property *properties;
+	struct  property *deadprops; /* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
+	struct  kref kref;
+	unsigned long _flags;
+	void	*data;
+};
+
+extern struct device_node *of_chosen;
+
+static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
+{
+	return test_bit(flag, &n->_flags);
+}
+
+static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
+{
+	set_bit(flag, &n->_flags);
+}
+
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->pde = de;
+}
+
+
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* For scanning the flat device-tree at boot time */
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+					    const char *uname, int depth,
+					    void *data),
+				  void *data);
+extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
+					unsigned long *size);
+extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
+
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+
+/* Other Prototypes */
+extern void finish_device_tree(void);
+extern void unflatten_device_tree(void);
+extern void early_init_devtree(void *);
+extern int machine_is_compatible(const char *compat);
+extern void print_properties(struct device_node *node);
+extern int prom_n_intr_cells(struct device_node* np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern int prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+				struct property *newprop,
+				struct property *oldprop);
+
+#ifdef CONFIG_PPC32
+/*
+ * PCI <-> OF matching functions
+ * (XXX should these be here?)
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+				   u8* bus, u8* devfn);
+extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
+extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
+extern void pci_create_OF_bus_map(void);
+#endif
+
+extern struct resource *request_OF_resource(struct device_node* node,
+				int index, const char* name_postfix);
+extern int release_OF_resource(struct device_node* node, int index);
+
+
+/*
+ * OF address retreival & translation
+ */
+
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const u32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | *(cell++);
+	return r;
+}
+
+/* Like of_read_number, but we want an unsigned long result */
+#ifdef CONFIG_PPC32
+static inline unsigned long of_read_ulong(const u32 *cell, int size)
+{
+	return cell[size-1];
+}
+#else
+#define of_read_ulong(cell, size)	of_read_number(cell, size)
+#endif
+
+/* Translate an OF address block into a CPU physical address
+ */
+extern u64 of_translate_address(struct device_node *np, const u32 *addr);
+
+/* Translate a DMA address from device space to CPU space */
+extern u64 of_translate_dma_address(struct device_node *dev,
+				    const u32 *in_addr);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern const u32 *of_get_address(struct device_node *dev, int index,
+			   u64 *size, unsigned int *flags);
+#ifdef CONFIG_PCI
+extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+			       u64 *size, unsigned int *flags);
+#else
+static inline const u32 *of_get_pci_address(struct device_node *dev,
+		int bar_no, u64 *size, unsigned int *flags)
+{
+	return NULL;
+}
+#endif /* CONFIG_PCI */
+
+/* Get an address as a resource. Note that if your address is
+ * a PIO address, the conversion will fail if the physical address
+ * can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early
+ * or it can't be matched to any host bridge IO space
+ */
+extern int of_address_to_resource(struct device_node *dev, int index,
+				  struct resource *r);
+#ifdef CONFIG_PCI
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+				      struct resource *r);
+#else
+static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
+		struct resource *r)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_PCI */
+
+/* Parse the ibm,dma-window property of an OF node into the busno, phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+		unsigned long *busno, unsigned long *phys, unsigned long *size);
+
+extern void kdump_move_device_tree(void);
+
+/* CPU OF node matching */
+struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+
+/* Get the MAC address */
+extern const void *of_get_mac_address(struct device_node *np);
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC		 4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+	struct device_node *controller;	/* Interrupt controller node */
+	u32 size;			/* Specifier size */
+	u32 specifier[OF_MAX_IRQ_SPEC];	/* Specifier copy */
+};
+
+/**
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags:	flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC	0x00000001
+#define OF_IMAP_NO_PHANDLE	0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent:	the device interrupt parent
+ * @intspec:	interrupt specifier ("interrupts" property of the device)
+ * @ointsize:   size of the passed in interrupt specifier
+ * @addr:	address specifier (start of "reg" property of the device)
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+			  u32 ointsize, const u32 *addr,
+			  struct of_irq *out_irq);
+
+
+/**
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device:	the device whose interrupt is to be resolved
+ * @index:     	index of the interrupt to resolve
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+			  struct of_irq *out_irq);
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:	the device whose interrupt is to be resolved
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+extern int of_irq_to_resource(struct device_node *dev, int index,
+			struct resource *r);
+
+/**
+ * of_iomap - Maps the memory mapped IO for a given device_node
+ * @device:	the device whose io range will be mapped
+ * @index:	index of the io range
+ *
+ * Returns a pointer to the mapped memory
+ */
+extern void __iomem *of_iomap(struct device_node *device, int index);
+
+/*
+ * NB:  This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PROM_H */
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
new file mode 100644
index 00000000000..f9e34c493cb
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3.h
@@ -0,0 +1,519 @@
+/*
+ *  PS3 platform declarations.
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_POWERPC_PS3_H)
+#define _ASM_POWERPC_PS3_H
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include "cell-pmu.h"
+
+union ps3_firmware_version {
+	u64 raw;
+	struct {
+		u16 pad;
+		u16 major;
+		u16 minor;
+		u16 rev;
+	};
+};
+
+void ps3_get_firmware_version(union ps3_firmware_version *v);
+int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev);
+
+/* 'Other OS' area */
+
+enum ps3_param_av_multi_out {
+	PS3_PARAM_AV_MULTI_OUT_NTSC = 0,
+	PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1,
+	PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2,
+	PS3_PARAM_AV_MULTI_OUT_SECAM = 3,
+};
+
+enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void);
+
+/* dma routines */
+
+enum ps3_dma_page_size {
+	PS3_DMA_4K = 12U,
+	PS3_DMA_64K = 16U,
+	PS3_DMA_1M = 20U,
+	PS3_DMA_16M = 24U,
+};
+
+enum ps3_dma_region_type {
+	PS3_DMA_OTHER = 0,
+	PS3_DMA_INTERNAL = 2,
+};
+
+struct ps3_dma_region_ops;
+
+/**
+ * struct ps3_dma_region - A per device dma state variables structure
+ * @did: The HV device id.
+ * @page_size: The ioc pagesize.
+ * @region_type: The HV region type.
+ * @bus_addr: The 'translated' bus address of the region.
+ * @len: The length in bytes of the region.
+ * @offset: The offset from the start of memory of the region.
+ * @ioid: The IOID of the device who owns this region
+ * @chunk_list: Opaque variable used by the ioc page manager.
+ * @region_ops: struct ps3_dma_region_ops - dma region operations
+ */
+
+struct ps3_dma_region {
+	struct ps3_system_bus_device *dev;
+	/* device variables */
+	const struct ps3_dma_region_ops *region_ops;
+	unsigned char ioid;
+	enum ps3_dma_page_size page_size;
+	enum ps3_dma_region_type region_type;
+	unsigned long len;
+	unsigned long offset;
+
+	/* driver variables  (set by ps3_dma_region_create) */
+	unsigned long bus_addr;
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+	} chunk_list;
+};
+
+struct ps3_dma_region_ops {
+	int (*create)(struct ps3_dma_region *);
+	int (*free)(struct ps3_dma_region *);
+	int (*map)(struct ps3_dma_region *,
+		   unsigned long virt_addr,
+		   unsigned long len,
+		   unsigned long *bus_addr,
+		   u64 iopte_pp);
+	int (*unmap)(struct ps3_dma_region *,
+		     unsigned long bus_addr,
+		     unsigned long len);
+};
+/**
+ * struct ps3_dma_region_init - Helper to initialize structure variables
+ *
+ * Helper to properly initialize variables prior to calling
+ * ps3_system_bus_device_register.
+ */
+
+struct ps3_system_bus_device;
+
+int ps3_dma_region_init(struct ps3_system_bus_device *dev,
+	struct ps3_dma_region *r, enum ps3_dma_page_size page_size,
+	enum ps3_dma_region_type region_type, void *addr, unsigned long len);
+int ps3_dma_region_create(struct ps3_dma_region *r);
+int ps3_dma_region_free(struct ps3_dma_region *r);
+int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
+	unsigned long len, unsigned long *bus_addr,
+	u64 iopte_pp);
+int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
+	unsigned long len);
+
+/* mmio routines */
+
+enum ps3_mmio_page_size {
+	PS3_MMIO_4K = 12U,
+	PS3_MMIO_64K = 16U
+};
+
+struct ps3_mmio_region_ops;
+/**
+ * struct ps3_mmio_region - a per device mmio state variables structure
+ *
+ * Current systems can be supported with a single region per device.
+ */
+
+struct ps3_mmio_region {
+	struct ps3_system_bus_device *dev;
+	const struct ps3_mmio_region_ops *mmio_ops;
+	unsigned long bus_addr;
+	unsigned long len;
+	enum ps3_mmio_page_size page_size;
+	unsigned long lpar_addr;
+};
+
+struct ps3_mmio_region_ops {
+	int (*create)(struct ps3_mmio_region *);
+	int (*free)(struct ps3_mmio_region *);
+};
+/**
+ * struct ps3_mmio_region_init - Helper to initialize structure variables
+ *
+ * Helper to properly initialize variables prior to calling
+ * ps3_system_bus_device_register.
+ */
+
+int ps3_mmio_region_init(struct ps3_system_bus_device *dev,
+	struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len,
+	enum ps3_mmio_page_size page_size);
+int ps3_mmio_region_create(struct ps3_mmio_region *r);
+int ps3_free_mmio_region(struct ps3_mmio_region *r);
+unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr);
+
+/* inrerrupt routines */
+
+enum ps3_cpu_binding {
+	PS3_BINDING_CPU_ANY = -1,
+	PS3_BINDING_CPU_0 = 0,
+	PS3_BINDING_CPU_1 = 1,
+};
+
+int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
+	unsigned int *virq);
+int ps3_irq_plug_destroy(unsigned int virq);
+int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq);
+int ps3_event_receive_port_destroy(unsigned int virq);
+int ps3_send_event_locally(unsigned int virq);
+
+int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
+	unsigned int *virq);
+int ps3_io_irq_destroy(unsigned int virq);
+int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
+	unsigned int *virq);
+int ps3_vuart_irq_destroy(unsigned int virq);
+int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
+	unsigned int class, unsigned int *virq);
+int ps3_spe_irq_destroy(unsigned int virq);
+
+int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
+	enum ps3_cpu_binding cpu, unsigned int *virq);
+int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
+	unsigned int virq);
+
+/* lv1 result codes */
+
+enum lv1_result {
+	LV1_SUCCESS                     = 0,
+	/* not used                       -1 */
+	LV1_RESOURCE_SHORTAGE           = -2,
+	LV1_NO_PRIVILEGE                = -3,
+	LV1_DENIED_BY_POLICY            = -4,
+	LV1_ACCESS_VIOLATION            = -5,
+	LV1_NO_ENTRY                    = -6,
+	LV1_DUPLICATE_ENTRY             = -7,
+	LV1_TYPE_MISMATCH               = -8,
+	LV1_BUSY                        = -9,
+	LV1_EMPTY                       = -10,
+	LV1_WRONG_STATE                 = -11,
+	/* not used                       -12 */
+	LV1_NO_MATCH                    = -13,
+	LV1_ALREADY_CONNECTED           = -14,
+	LV1_UNSUPPORTED_PARAMETER_VALUE = -15,
+	LV1_CONDITION_NOT_SATISFIED     = -16,
+	LV1_ILLEGAL_PARAMETER_VALUE     = -17,
+	LV1_BAD_OPTION                  = -18,
+	LV1_IMPLEMENTATION_LIMITATION   = -19,
+	LV1_NOT_IMPLEMENTED             = -20,
+	LV1_INVALID_CLASS_ID            = -21,
+	LV1_CONSTRAINT_NOT_SATISFIED    = -22,
+	LV1_ALIGNMENT_ERROR             = -23,
+	LV1_HARDWARE_ERROR              = -24,
+	LV1_INVALID_DATA_FORMAT         = -25,
+	LV1_INVALID_OPERATION           = -26,
+	LV1_INTERNAL_ERROR              = -32768,
+};
+
+static inline const char* ps3_result(int result)
+{
+#if defined(DEBUG)
+	switch (result) {
+	case LV1_SUCCESS:
+		return "LV1_SUCCESS (0)";
+	case -1:
+		return "** unknown result ** (-1)";
+	case LV1_RESOURCE_SHORTAGE:
+		return "LV1_RESOURCE_SHORTAGE (-2)";
+	case LV1_NO_PRIVILEGE:
+		return "LV1_NO_PRIVILEGE (-3)";
+	case LV1_DENIED_BY_POLICY:
+		return "LV1_DENIED_BY_POLICY (-4)";
+	case LV1_ACCESS_VIOLATION:
+		return "LV1_ACCESS_VIOLATION (-5)";
+	case LV1_NO_ENTRY:
+		return "LV1_NO_ENTRY (-6)";
+	case LV1_DUPLICATE_ENTRY:
+		return "LV1_DUPLICATE_ENTRY (-7)";
+	case LV1_TYPE_MISMATCH:
+		return "LV1_TYPE_MISMATCH (-8)";
+	case LV1_BUSY:
+		return "LV1_BUSY (-9)";
+	case LV1_EMPTY:
+		return "LV1_EMPTY (-10)";
+	case LV1_WRONG_STATE:
+		return "LV1_WRONG_STATE (-11)";
+	case -12:
+		return "** unknown result ** (-12)";
+	case LV1_NO_MATCH:
+		return "LV1_NO_MATCH (-13)";
+	case LV1_ALREADY_CONNECTED:
+		return "LV1_ALREADY_CONNECTED (-14)";
+	case LV1_UNSUPPORTED_PARAMETER_VALUE:
+		return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)";
+	case LV1_CONDITION_NOT_SATISFIED:
+		return "LV1_CONDITION_NOT_SATISFIED (-16)";
+	case LV1_ILLEGAL_PARAMETER_VALUE:
+		return "LV1_ILLEGAL_PARAMETER_VALUE (-17)";
+	case LV1_BAD_OPTION:
+		return "LV1_BAD_OPTION (-18)";
+	case LV1_IMPLEMENTATION_LIMITATION:
+		return "LV1_IMPLEMENTATION_LIMITATION (-19)";
+	case LV1_NOT_IMPLEMENTED:
+		return "LV1_NOT_IMPLEMENTED (-20)";
+	case LV1_INVALID_CLASS_ID:
+		return "LV1_INVALID_CLASS_ID (-21)";
+	case LV1_CONSTRAINT_NOT_SATISFIED:
+		return "LV1_CONSTRAINT_NOT_SATISFIED (-22)";
+	case LV1_ALIGNMENT_ERROR:
+		return "LV1_ALIGNMENT_ERROR (-23)";
+	case LV1_HARDWARE_ERROR:
+		return "LV1_HARDWARE_ERROR (-24)";
+	case LV1_INVALID_DATA_FORMAT:
+		return "LV1_INVALID_DATA_FORMAT (-25)";
+	case LV1_INVALID_OPERATION:
+		return "LV1_INVALID_OPERATION (-26)";
+	case LV1_INTERNAL_ERROR:
+		return "LV1_INTERNAL_ERROR (-32768)";
+	default:
+		BUG();
+		return "** unknown result **";
+	};
+#else
+	return "";
+#endif
+}
+
+/* system bus routines */
+
+enum ps3_match_id {
+	PS3_MATCH_ID_EHCI           = 1,
+	PS3_MATCH_ID_OHCI           = 2,
+	PS3_MATCH_ID_GELIC          = 3,
+	PS3_MATCH_ID_AV_SETTINGS    = 4,
+	PS3_MATCH_ID_SYSTEM_MANAGER = 5,
+	PS3_MATCH_ID_STOR_DISK      = 6,
+	PS3_MATCH_ID_STOR_ROM       = 7,
+	PS3_MATCH_ID_STOR_FLASH     = 8,
+	PS3_MATCH_ID_SOUND          = 9,
+	PS3_MATCH_ID_GRAPHICS       = 10,
+	PS3_MATCH_ID_LPM            = 11,
+};
+
+#define PS3_MODULE_ALIAS_EHCI           "ps3:1"
+#define PS3_MODULE_ALIAS_OHCI           "ps3:2"
+#define PS3_MODULE_ALIAS_GELIC          "ps3:3"
+#define PS3_MODULE_ALIAS_AV_SETTINGS    "ps3:4"
+#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5"
+#define PS3_MODULE_ALIAS_STOR_DISK      "ps3:6"
+#define PS3_MODULE_ALIAS_STOR_ROM       "ps3:7"
+#define PS3_MODULE_ALIAS_STOR_FLASH     "ps3:8"
+#define PS3_MODULE_ALIAS_SOUND          "ps3:9"
+#define PS3_MODULE_ALIAS_GRAPHICS       "ps3:10"
+#define PS3_MODULE_ALIAS_LPM            "ps3:11"
+
+enum ps3_system_bus_device_type {
+	PS3_DEVICE_TYPE_IOC0 = 1,
+	PS3_DEVICE_TYPE_SB,
+	PS3_DEVICE_TYPE_VUART,
+	PS3_DEVICE_TYPE_LPM,
+};
+
+enum ps3_match_sub_id {
+	/* for PS3_MATCH_ID_GRAPHICS */
+	PS3_MATCH_SUB_ID_FB		= 1,
+};
+
+/**
+ * struct ps3_system_bus_device - a device on the system bus
+ */
+
+struct ps3_system_bus_device {
+	enum ps3_match_id match_id;
+	enum ps3_match_sub_id match_sub_id;
+	enum ps3_system_bus_device_type dev_type;
+
+	u64 bus_id;                       /* SB */
+	u64 dev_id;                       /* SB */
+	unsigned int interrupt_id;        /* SB */
+	struct ps3_dma_region *d_region;  /* SB, IOC0 */
+	struct ps3_mmio_region *m_region; /* SB, IOC0*/
+	unsigned int port_number;         /* VUART */
+	struct {                          /* LPM */
+		u64 node_id;
+		u64 pu_id;
+		u64 rights;
+	} lpm;
+
+/*	struct iommu_table *iommu_table; -- waiting for BenH's cleanups */
+	struct device core;
+	void *driver_priv; /* private driver variables */
+};
+
+int ps3_open_hv_device(struct ps3_system_bus_device *dev);
+int ps3_close_hv_device(struct ps3_system_bus_device *dev);
+
+/**
+ * struct ps3_system_bus_driver - a driver for a device on the system bus
+ */
+
+struct ps3_system_bus_driver {
+	enum ps3_match_id match_id;
+	enum ps3_match_sub_id match_sub_id;
+	struct device_driver core;
+	int (*probe)(struct ps3_system_bus_device *);
+	int (*remove)(struct ps3_system_bus_device *);
+	int (*shutdown)(struct ps3_system_bus_device *);
+/*	int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */
+/*	int (*resume)(struct ps3_system_bus_device *); */
+};
+
+int ps3_system_bus_device_register(struct ps3_system_bus_device *dev);
+int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv);
+void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv);
+
+static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv(
+	struct device_driver *_drv)
+{
+	return container_of(_drv, struct ps3_system_bus_driver, core);
+}
+static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev(
+	struct device *_dev)
+{
+	return container_of(_dev, struct ps3_system_bus_device, core);
+}
+static inline struct ps3_system_bus_driver *
+	ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev)
+{
+	BUG_ON(!_dev);
+	BUG_ON(!_dev->core.driver);
+	return ps3_drv_to_system_bus_drv(_dev->core.driver);
+}
+
+/**
+ * ps3_system_bus_set_drvdata -
+ * @dev: device structure
+ * @data: Data to set
+ */
+
+static inline void ps3_system_bus_set_driver_data(
+	struct ps3_system_bus_device *dev, void *data)
+{
+	dev->core.driver_data = data;
+}
+static inline void *ps3_system_bus_get_driver_data(
+	struct ps3_system_bus_device *dev)
+{
+	return dev->core.driver_data;
+}
+
+/* These two need global scope for get_dma_ops(). */
+
+extern struct bus_type ps3_system_bus_type;
+
+/* system manager */
+
+struct ps3_sys_manager_ops {
+	struct ps3_system_bus_device *dev;
+	void (*power_off)(struct ps3_system_bus_device *dev);
+	void (*restart)(struct ps3_system_bus_device *dev);
+};
+
+void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
+void __noreturn ps3_sys_manager_power_off(void);
+void __noreturn ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_halt(void);
+int ps3_sys_manager_get_wol(void);
+void ps3_sys_manager_set_wol(int state);
+
+struct ps3_prealloc {
+    const char *name;
+    void *address;
+    unsigned long size;
+    unsigned long align;
+};
+
+extern struct ps3_prealloc ps3fb_videomemory;
+extern struct ps3_prealloc ps3flash_bounce_buffer;
+
+/* logical performance monitor */
+
+/**
+ * enum ps3_lpm_rights - Rigths granted by the system policy module.
+ *
+ * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm.
+ * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer.
+ */
+
+enum ps3_lpm_rights {
+	PS3_LPM_RIGHTS_USE_LPM = 0x001,
+	PS3_LPM_RIGHTS_USE_TB = 0x100,
+};
+
+/**
+ * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use.
+ *
+ * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer.
+ * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer.  Must have
+ *  rights @PS3_LPM_RIGHTS_USE_TB.
+ */
+
+enum ps3_lpm_tb_type {
+	PS3_LPM_TB_TYPE_NONE = 0,
+	PS3_LPM_TB_TYPE_INTERNAL = 1,
+};
+
+int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache,
+	u64 tb_cache_size);
+int ps3_lpm_close(void);
+int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count,
+	unsigned long *bytes_copied);
+int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
+	unsigned long count, unsigned long *bytes_copied);
+void ps3_set_bookmark(u64 bookmark);
+void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id);
+int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit,
+	u8 bus_word);
+
+u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr);
+void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+u32 ps3_read_ctr(u32 cpu, u32 ctr);
+void ps3_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+u32 ps3_read_pm07_control(u32 cpu, u32 ctr);
+void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg);
+void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr);
+void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+void ps3_enable_pm(u32 cpu);
+void ps3_disable_pm(u32 cpu);
+void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
+void ps3_disable_pm_interrupts(u32 cpu);
+
+u32 ps3_get_and_clear_pm_interrupts(u32 cpu);
+void ps3_sync_irq(int node);
+u32 ps3_get_hw_thread_id(int cpu);
+u64 ps3_get_spe_id(void *arg);
+
+#endif
diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h
new file mode 100644
index 00000000000..fda98715cd3
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3av.h
@@ -0,0 +1,744 @@
+/*
+ *  PS3 AV backend support.
+ *
+ *  Copyright (C) 2007 Sony Computer Entertainment Inc.
+ *  Copyright 2007 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASM_POWERPC_PS3AV_H_
+#define _ASM_POWERPC_PS3AV_H_
+
+/** command for ioctl() **/
+#define PS3AV_VERSION 0x205	/* version of ps3av command */
+
+#define PS3AV_CID_AV_INIT              0x00000001
+#define PS3AV_CID_AV_FIN               0x00000002
+#define PS3AV_CID_AV_GET_HW_CONF       0x00000003
+#define PS3AV_CID_AV_GET_MONITOR_INFO  0x00000004
+#define PS3AV_CID_AV_ENABLE_EVENT      0x00000006
+#define PS3AV_CID_AV_DISABLE_EVENT     0x00000007
+#define PS3AV_CID_AV_TV_MUTE           0x0000000a
+
+#define PS3AV_CID_AV_VIDEO_CS          0x00010001
+#define PS3AV_CID_AV_VIDEO_MUTE        0x00010002
+#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003
+#define PS3AV_CID_AV_AUDIO_PARAM       0x00020001
+#define PS3AV_CID_AV_AUDIO_MUTE        0x00020002
+#define PS3AV_CID_AV_HDMI_MODE         0x00040001
+
+#define PS3AV_CID_VIDEO_INIT           0x01000001
+#define PS3AV_CID_VIDEO_MODE           0x01000002
+#define PS3AV_CID_VIDEO_FORMAT         0x01000004
+#define PS3AV_CID_VIDEO_PITCH          0x01000005
+
+#define PS3AV_CID_AUDIO_INIT           0x02000001
+#define PS3AV_CID_AUDIO_MODE           0x02000002
+#define PS3AV_CID_AUDIO_MUTE           0x02000003
+#define PS3AV_CID_AUDIO_ACTIVE         0x02000004
+#define PS3AV_CID_AUDIO_INACTIVE       0x02000005
+#define PS3AV_CID_AUDIO_SPDIF_BIT      0x02000006
+#define PS3AV_CID_AUDIO_CTRL           0x02000007
+
+#define PS3AV_CID_EVENT_UNPLUGGED      0x10000001
+#define PS3AV_CID_EVENT_PLUGGED        0x10000002
+#define PS3AV_CID_EVENT_HDCP_DONE      0x10000003
+#define PS3AV_CID_EVENT_HDCP_FAIL      0x10000004
+#define PS3AV_CID_EVENT_HDCP_AUTH      0x10000005
+#define PS3AV_CID_EVENT_HDCP_ERROR     0x10000006
+
+#define PS3AV_CID_AVB_PARAM            0x04000001
+
+/* max backend ports */
+#define PS3AV_HDMI_MAX                 2	/* HDMI_0 HDMI_1 */
+#define PS3AV_AVMULTI_MAX              1	/* AVMULTI_0 */
+#define PS3AV_AV_PORT_MAX              (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX)
+#define PS3AV_OPT_PORT_MAX             1	/* SPDIF0 */
+#define PS3AV_HEAD_MAX                 2	/* HEAD_A HEAD_B */
+
+/* num of pkt for PS3AV_CID_AVB_PARAM */
+#define PS3AV_AVB_NUM_VIDEO            PS3AV_HEAD_MAX
+#define PS3AV_AVB_NUM_AUDIO            0	/* not supported */
+#define PS3AV_AVB_NUM_AV_VIDEO         PS3AV_AV_PORT_MAX
+#define PS3AV_AVB_NUM_AV_AUDIO         PS3AV_HDMI_MAX
+
+#define PS3AV_MUTE_PORT_MAX            1	/* num of ports in mute pkt */
+
+/* event_bit */
+#define PS3AV_CMD_EVENT_BIT_UNPLUGGED			(1 << 0)
+#define PS3AV_CMD_EVENT_BIT_PLUGGED			(1 << 1)
+#define PS3AV_CMD_EVENT_BIT_HDCP_DONE			(1 << 2)
+#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL			(1 << 3)
+#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH			(1 << 4)
+#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY		(1 << 5)
+
+/* common params */
+/* mute */
+#define PS3AV_CMD_MUTE_OFF				0x0000
+#define PS3AV_CMD_MUTE_ON				0x0001
+/* avport */
+#define PS3AV_CMD_AVPORT_HDMI_0				0x0000
+#define PS3AV_CMD_AVPORT_HDMI_1				0x0001
+#define PS3AV_CMD_AVPORT_AVMULTI_0			0x0010
+#define PS3AV_CMD_AVPORT_SPDIF_0			0x0020
+#define PS3AV_CMD_AVPORT_SPDIF_1			0x0021
+
+/* for av backend */
+/* av_mclk */
+#define PS3AV_CMD_AV_MCLK_128				0x0000
+#define PS3AV_CMD_AV_MCLK_256				0x0001
+#define PS3AV_CMD_AV_MCLK_512				0x0003
+/* av_inputlen */
+#define PS3AV_CMD_AV_INPUTLEN_16			0x02
+#define PS3AV_CMD_AV_INPUTLEN_20			0x0a
+#define PS3AV_CMD_AV_INPUTLEN_24			0x0b
+/* alayout */
+#define PS3AV_CMD_AV_LAYOUT_32				(1 << 0)
+#define PS3AV_CMD_AV_LAYOUT_44				(1 << 1)
+#define PS3AV_CMD_AV_LAYOUT_48				(1 << 2)
+#define PS3AV_CMD_AV_LAYOUT_88				(1 << 3)
+#define PS3AV_CMD_AV_LAYOUT_96				(1 << 4)
+#define PS3AV_CMD_AV_LAYOUT_176				(1 << 5)
+#define PS3AV_CMD_AV_LAYOUT_192				(1 << 6)
+/* hdmi_mode */
+#define PS3AV_CMD_AV_HDMI_MODE_NORMAL			0xff
+#define PS3AV_CMD_AV_HDMI_HDCP_OFF			0x01
+#define PS3AV_CMD_AV_HDMI_EDID_PASS			0x80
+#define PS3AV_CMD_AV_HDMI_DVI				0x40
+
+/* for video module */
+/* video_head */
+#define PS3AV_CMD_VIDEO_HEAD_A				0x0000
+#define PS3AV_CMD_VIDEO_HEAD_B				0x0001
+/* video_cs_out video_cs_in */
+#define PS3AV_CMD_VIDEO_CS_NONE				0x0000
+#define PS3AV_CMD_VIDEO_CS_RGB_8			0x0001
+#define PS3AV_CMD_VIDEO_CS_YUV444_8			0x0002
+#define PS3AV_CMD_VIDEO_CS_YUV422_8			0x0003
+#define PS3AV_CMD_VIDEO_CS_XVYCC_8			0x0004
+#define PS3AV_CMD_VIDEO_CS_RGB_10			0x0005
+#define PS3AV_CMD_VIDEO_CS_YUV444_10			0x0006
+#define PS3AV_CMD_VIDEO_CS_YUV422_10			0x0007
+#define PS3AV_CMD_VIDEO_CS_XVYCC_10			0x0008
+#define PS3AV_CMD_VIDEO_CS_RGB_12			0x0009
+#define PS3AV_CMD_VIDEO_CS_YUV444_12			0x000a
+#define PS3AV_CMD_VIDEO_CS_YUV422_12			0x000b
+#define PS3AV_CMD_VIDEO_CS_XVYCC_12			0x000c
+/* video_vid */
+#define PS3AV_CMD_VIDEO_VID_NONE			0x0000
+#define PS3AV_CMD_VIDEO_VID_480I			0x0001
+#define PS3AV_CMD_VIDEO_VID_576I			0x0003
+#define PS3AV_CMD_VIDEO_VID_480P			0x0005
+#define PS3AV_CMD_VIDEO_VID_576P			0x0006
+#define PS3AV_CMD_VIDEO_VID_1080I_60HZ			0x0007
+#define PS3AV_CMD_VIDEO_VID_1080I_50HZ			0x0008
+#define PS3AV_CMD_VIDEO_VID_720P_60HZ			0x0009
+#define PS3AV_CMD_VIDEO_VID_720P_50HZ			0x000a
+#define PS3AV_CMD_VIDEO_VID_1080P_60HZ			0x000b
+#define PS3AV_CMD_VIDEO_VID_1080P_50HZ			0x000c
+#define PS3AV_CMD_VIDEO_VID_WXGA			0x000d
+#define PS3AV_CMD_VIDEO_VID_SXGA			0x000e
+#define PS3AV_CMD_VIDEO_VID_WUXGA			0x000f
+#define PS3AV_CMD_VIDEO_VID_480I_A			0x0010
+/* video_format */
+#define PS3AV_CMD_VIDEO_FORMAT_BLACK			0x0000
+#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT		0x0007
+/* video_order */
+#define PS3AV_CMD_VIDEO_ORDER_RGB			0x0000
+#define PS3AV_CMD_VIDEO_ORDER_BGR			0x0001
+/* video_fmt */
+#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8			0x0000
+/* video_out_format */
+#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT		0x0000
+/* video_cl_cnv */
+#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT		0x0000
+#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT		0x0010
+/* video_sync */
+#define PS3AV_CMD_VIDEO_SYNC_VSYNC			0x0001
+#define PS3AV_CMD_VIDEO_SYNC_CSYNC			0x0004
+#define PS3AV_CMD_VIDEO_SYNC_HSYNC			0x0010
+
+/* for audio module */
+/* num_of_ch */
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_2			0x0000
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_3			0x0001
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_4			0x0002
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_5			0x0003
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_6			0x0004
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_7			0x0005
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_8			0x0006
+/* audio_fs */
+#define PS3AV_CMD_AUDIO_FS_32K				0x0001
+#define PS3AV_CMD_AUDIO_FS_44K				0x0002
+#define PS3AV_CMD_AUDIO_FS_48K				0x0003
+#define PS3AV_CMD_AUDIO_FS_88K				0x0004
+#define PS3AV_CMD_AUDIO_FS_96K				0x0005
+#define PS3AV_CMD_AUDIO_FS_176K				0x0006
+#define PS3AV_CMD_AUDIO_FS_192K				0x0007
+/* audio_word_bits */
+#define PS3AV_CMD_AUDIO_WORD_BITS_16			0x0001
+#define PS3AV_CMD_AUDIO_WORD_BITS_20			0x0002
+#define PS3AV_CMD_AUDIO_WORD_BITS_24			0x0003
+/* audio_format */
+#define PS3AV_CMD_AUDIO_FORMAT_PCM			0x0001
+#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM		0x00ff
+/* audio_source */
+#define PS3AV_CMD_AUDIO_SOURCE_SERIAL			0x0000
+#define PS3AV_CMD_AUDIO_SOURCE_SPDIF			0x0001
+/* audio_swap */
+#define PS3AV_CMD_AUDIO_SWAP_0				0x0000
+#define PS3AV_CMD_AUDIO_SWAP_1				0x0000
+/* audio_map */
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0			0x0000
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1			0x0001
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2			0x0002
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3			0x0003
+/* audio_layout */
+#define PS3AV_CMD_AUDIO_LAYOUT_2CH			0x0000
+#define PS3AV_CMD_AUDIO_LAYOUT_6CH			0x000b	/* LREClr */
+#define PS3AV_CMD_AUDIO_LAYOUT_8CH			0x001f	/* LREClrXY */
+/* audio_downmix */
+#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED		0x0000
+#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED		0x0001
+
+/* audio_port */
+#define PS3AV_CMD_AUDIO_PORT_HDMI_0			( 1 << 0 )
+#define PS3AV_CMD_AUDIO_PORT_HDMI_1			( 1 << 1 )
+#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0			( 1 << 10 )
+#define PS3AV_CMD_AUDIO_PORT_SPDIF_0			( 1 << 20 )
+#define PS3AV_CMD_AUDIO_PORT_SPDIF_1			( 1 << 21 )
+
+/* audio_ctrl_id */
+#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS		0x0001
+#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK			0x0002
+/* audio_ctrl_data[0] reset */
+#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT		0x0001
+/* audio_ctrl_data[0] de-emphasis */
+#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON		0x0001
+/* audio_ctrl_data[0] avclk */
+#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22			0x0000
+#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18			0x0001
+
+/* av_vid */
+/* do not use these params directly, use vid_video2av */
+#define PS3AV_CMD_AV_VID_480I				0x0000
+#define PS3AV_CMD_AV_VID_480P				0x0001
+#define PS3AV_CMD_AV_VID_720P_60HZ			0x0002
+#define PS3AV_CMD_AV_VID_1080I_60HZ			0x0003
+#define PS3AV_CMD_AV_VID_1080P_60HZ			0x0004
+#define PS3AV_CMD_AV_VID_576I				0x0005
+#define PS3AV_CMD_AV_VID_576P				0x0006
+#define PS3AV_CMD_AV_VID_720P_50HZ			0x0007
+#define PS3AV_CMD_AV_VID_1080I_50HZ			0x0008
+#define PS3AV_CMD_AV_VID_1080P_50HZ			0x0009
+#define PS3AV_CMD_AV_VID_WXGA				0x000a
+#define PS3AV_CMD_AV_VID_SXGA				0x000b
+#define PS3AV_CMD_AV_VID_WUXGA				0x000c
+/* av_cs_out av_cs_in */
+/* use cs_video2av() */
+#define PS3AV_CMD_AV_CS_RGB_8				0x0000
+#define PS3AV_CMD_AV_CS_YUV444_8			0x0001
+#define PS3AV_CMD_AV_CS_YUV422_8			0x0002
+#define PS3AV_CMD_AV_CS_XVYCC_8				0x0003
+#define PS3AV_CMD_AV_CS_RGB_10				0x0004
+#define PS3AV_CMD_AV_CS_YUV444_10			0x0005
+#define PS3AV_CMD_AV_CS_YUV422_10			0x0006
+#define PS3AV_CMD_AV_CS_XVYCC_10			0x0007
+#define PS3AV_CMD_AV_CS_RGB_12				0x0008
+#define PS3AV_CMD_AV_CS_YUV444_12			0x0009
+#define PS3AV_CMD_AV_CS_YUV422_12			0x000a
+#define PS3AV_CMD_AV_CS_XVYCC_12			0x000b
+#define PS3AV_CMD_AV_CS_8				0x0000
+#define PS3AV_CMD_AV_CS_10				0x0001
+#define PS3AV_CMD_AV_CS_12				0x0002
+/* dither */
+#define PS3AV_CMD_AV_DITHER_OFF				0x0000
+#define PS3AV_CMD_AV_DITHER_ON				0x0001
+#define PS3AV_CMD_AV_DITHER_8BIT			0x0000
+#define PS3AV_CMD_AV_DITHER_10BIT			0x0002
+#define PS3AV_CMD_AV_DITHER_12BIT			0x0004
+/* super_white */
+#define PS3AV_CMD_AV_SUPER_WHITE_OFF			0x0000
+#define PS3AV_CMD_AV_SUPER_WHITE_ON			0x0001
+/* aspect */
+#define PS3AV_CMD_AV_ASPECT_16_9			0x0000
+#define PS3AV_CMD_AV_ASPECT_4_3				0x0001
+/* video_cs_cnv() */
+#define PS3AV_CMD_VIDEO_CS_RGB				0x0001
+#define PS3AV_CMD_VIDEO_CS_YUV422			0x0002
+#define PS3AV_CMD_VIDEO_CS_YUV444			0x0003
+
+/* for broadcast automode */
+#define PS3AV_RESBIT_720x480P			0x0003	/* 0x0001 | 0x0002 */
+#define PS3AV_RESBIT_720x576P			0x0003	/* 0x0001 | 0x0002 */
+#define PS3AV_RESBIT_1280x720P			0x0004
+#define PS3AV_RESBIT_1920x1080I			0x0008
+#define PS3AV_RESBIT_1920x1080P			0x4000
+#define PS3AV_RES_MASK_60			(PS3AV_RESBIT_720x480P \
+						| PS3AV_RESBIT_1280x720P \
+						| PS3AV_RESBIT_1920x1080I \
+						| PS3AV_RESBIT_1920x1080P)
+#define PS3AV_RES_MASK_50			(PS3AV_RESBIT_720x576P \
+						| PS3AV_RESBIT_1280x720P \
+						| PS3AV_RESBIT_1920x1080I \
+						| PS3AV_RESBIT_1920x1080P)
+
+/* for VESA automode */
+#define PS3AV_RESBIT_VGA			0x0001
+#define PS3AV_RESBIT_WXGA			0x0002
+#define PS3AV_RESBIT_SXGA			0x0004
+#define PS3AV_RESBIT_WUXGA			0x0008
+#define PS3AV_RES_MASK_VESA			(PS3AV_RESBIT_WXGA |\
+						 PS3AV_RESBIT_SXGA |\
+						 PS3AV_RESBIT_WUXGA)
+
+#define PS3AV_MONITOR_TYPE_HDMI			1	/* HDMI */
+#define PS3AV_MONITOR_TYPE_DVI			2	/* DVI */
+
+
+/* for video mode */
+enum ps3av_mode_num {
+	PS3AV_MODE_AUTO				= 0,
+	PS3AV_MODE_480I				= 1,
+	PS3AV_MODE_480P				= 2,
+	PS3AV_MODE_720P60			= 3,
+	PS3AV_MODE_1080I60			= 4,
+	PS3AV_MODE_1080P60			= 5,
+	PS3AV_MODE_576I				= 6,
+	PS3AV_MODE_576P				= 7,
+	PS3AV_MODE_720P50			= 8,
+	PS3AV_MODE_1080I50			= 9,
+	PS3AV_MODE_1080P50			= 10,
+	PS3AV_MODE_WXGA				= 11,
+	PS3AV_MODE_SXGA				= 12,
+	PS3AV_MODE_WUXGA			= 13,
+};
+
+#define PS3AV_MODE_MASK				0x000F
+#define PS3AV_MODE_HDCP_OFF			0x1000	/* Retail PS3 product doesn't support this */
+#define PS3AV_MODE_DITHER			0x0800
+#define PS3AV_MODE_COLOR			0x0400
+#define PS3AV_MODE_WHITE			0x0200
+#define PS3AV_MODE_FULL				0x0080
+#define PS3AV_MODE_DVI				0x0040
+#define PS3AV_MODE_RGB				0x0020
+
+
+#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60	PS3AV_MODE_480P
+#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60	PS3AV_MODE_480I
+#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50	PS3AV_MODE_576P
+#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50	PS3AV_MODE_576I
+
+#define PS3AV_REGION_60				0x01
+#define PS3AV_REGION_50				0x02
+#define PS3AV_REGION_RGB			0x10
+
+#define get_status(buf)				(((__u32 *)buf)[2])
+#define PS3AV_HDR_SIZE				4	/* version + size */
+
+
+/** command packet structure **/
+struct ps3av_send_hdr {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+};
+
+struct ps3av_reply_hdr {
+	u16 version;
+	u16 size;
+	u32 cid;
+	u32 status;
+};
+
+/* backend: initialization */
+struct ps3av_pkt_av_init {
+	struct ps3av_send_hdr send_hdr;
+	u32 event_bit;
+};
+
+/* backend: finalize */
+struct ps3av_pkt_av_fin {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* backend: get port */
+struct ps3av_pkt_av_get_hw_conf {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 status;
+	u16 num_of_hdmi;	/* out: number of hdmi */
+	u16 num_of_avmulti;	/* out: number of avmulti */
+	u16 num_of_spdif;	/* out: number of hdmi */
+	u16 reserved;
+};
+
+/* backend: get monitor info */
+struct ps3av_info_resolution {
+	u32 res_bits;
+	u32 native;
+};
+
+struct ps3av_info_cs {
+	u8 rgb;
+	u8 yuv444;
+	u8 yuv422;
+	u8 reserved;
+};
+
+struct ps3av_info_color {
+	u16 red_x;
+	u16 red_y;
+	u16 green_x;
+	u16 green_y;
+	u16 blue_x;
+	u16 blue_y;
+	u16 white_x;
+	u16 white_y;
+	u32 gamma;
+};
+
+struct ps3av_info_audio {
+	u8 type;
+	u8 max_num_of_ch;
+	u8 fs;
+	u8 sbit;
+};
+
+struct ps3av_info_monitor {
+	u8 avport;
+	u8 monitor_id[10];
+	u8 monitor_type;
+	u8 monitor_name[16];
+	struct ps3av_info_resolution res_60;
+	struct ps3av_info_resolution res_50;
+	struct ps3av_info_resolution res_other;
+	struct ps3av_info_resolution res_vesa;
+	struct ps3av_info_cs cs;
+	struct ps3av_info_color color;
+	u8 supported_ai;
+	u8 speaker_info;
+	u8 num_of_audio_block;
+	struct ps3av_info_audio audio[0];	/* 0 or more audio blocks */
+	u8 reserved[169];
+} __attribute__ ((packed));
+
+struct ps3av_pkt_av_get_monitor_info {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+	/* recv */
+	struct ps3av_info_monitor info;	/* out: monitor info */
+};
+
+/* backend: enable/disable event */
+struct ps3av_pkt_av_event {
+	struct ps3av_send_hdr send_hdr;
+	u32 event_bit;		/* in */
+};
+
+/* backend: video cs param */
+struct ps3av_pkt_av_video_cs {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 av_vid;		/* in: video resolution */
+	u16 av_cs_out;		/* in: output color space */
+	u16 av_cs_in;		/* in: input color space */
+	u8 dither;		/* in: dither bit length */
+	u8 bitlen_out;		/* in: bit length */
+	u8 super_white;		/* in: super white */
+	u8 aspect;		/* in: aspect ratio */
+};
+
+/* backend: video mute */
+struct ps3av_av_mute {
+	u16 avport;		/* in: avport */
+	u16 mute;		/* in: mute on/off */
+};
+
+struct ps3av_pkt_av_video_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
+};
+
+/* backend: video disable signal */
+struct ps3av_pkt_av_video_disable_sig {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+};
+
+/* backend: audio param */
+struct ps3av_audio_info_frame {
+	struct pb1_bit {
+		u8 ct:4;
+		u8 rsv:1;
+		u8 cc:3;
+	} pb1;
+	struct pb2_bit {
+		u8 rsv:3;
+		u8 sf:3;
+		u8 ss:2;
+	} pb2;
+	u8 pb3;
+	u8 pb4;
+	struct pb5_bit {
+		u8 dm:1;
+		u8 lsv:4;
+		u8 rsv:3;
+	} pb5;
+};
+
+struct ps3av_pkt_av_audio_param {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+	u8 mclk;		/* in: audio mclk */
+	u8 ns[3];		/* in: audio ns val */
+	u8 enable;		/* in: audio enable */
+	u8 swaplr;		/* in: audio swap */
+	u8 fifomap;		/* in: audio fifomap */
+	u8 inputctrl;		/* in: audio input ctrl */
+	u8 inputlen;		/* in: sample bit size */
+	u8 layout;		/* in: speaker layout param */
+	struct ps3av_audio_info_frame info;	/* in: info */
+	u8 chstat[5];		/* in: ch stat */
+};
+
+/* backend: audio_mute */
+struct ps3av_pkt_av_audio_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
+};
+
+/* backend: hdmi_mode */
+struct ps3av_pkt_av_hdmi_mode {
+	struct ps3av_send_hdr send_hdr;
+	u8 mode;		/* in: hdmi_mode */
+	u8 reserved0;
+	u8 reserved1;
+	u8 reserved2;
+};
+
+/* backend: tv_mute */
+struct ps3av_pkt_av_tv_mute {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport HDMI only */
+	u16 mute;		/* in: mute */
+};
+
+/* video: initialize */
+struct ps3av_pkt_video_init {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* video: mode setting */
+struct ps3av_pkt_video_mode {
+	struct ps3av_send_hdr send_hdr;
+	u32 video_head;		/* in: head */
+	u32 reserved;
+	u32 video_vid;		/* in: video resolution */
+	u16 reserved1;
+	u16 width;		/* in: width in pixel */
+	u16 reserved2;
+	u16 height;		/* in: height in pixel */
+	u32 pitch;		/* in: line size in byte */
+	u32 video_out_format;	/* in: out format */
+	u32 video_format;	/* in: input frame buffer format */
+	u8 reserved3;
+	u8 video_cl_cnv;	/* in: color conversion */
+	u16 video_order;	/* in: input RGB order */
+	u32 reserved4;
+};
+
+/* video: format */
+struct ps3av_pkt_video_format {
+	struct ps3av_send_hdr send_hdr;
+	u32 video_head;		/* in: head */
+	u32 video_format;	/* in: frame buffer format */
+	u8 reserved;
+	u8 video_cl_cnv;	/* in: color conversion */
+	u16 video_order;	/* in: input RGB order */
+};
+
+/* video: pitch */
+struct ps3av_pkt_video_pitch {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u32 video_head;		/* in: head */
+	u32 pitch;		/* in: line size in byte */
+};
+
+/* audio: initialize */
+struct ps3av_pkt_audio_init {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* audio: mode setting */
+struct ps3av_pkt_audio_mode {
+	struct ps3av_send_hdr send_hdr;
+	u8 avport;		/* in: avport */
+	u8 reserved0[3];
+	u32 mask;		/* in: mask */
+	u32 audio_num_of_ch;	/* in: number of ch */
+	u32 audio_fs;		/* in: sampling freq */
+	u32 audio_word_bits;	/* in: sample bit size */
+	u32 audio_format;	/* in: audio output format */
+	u32 audio_source;	/* in: audio source */
+	u8 audio_enable[4];	/* in: audio enable */
+	u8 audio_swap[4];	/* in: audio swap */
+	u8 audio_map[4];	/* in: audio map */
+	u32 audio_layout;	/* in: speaker layout */
+	u32 audio_downmix;	/* in: audio downmix permission */
+	u32 audio_downmix_level;
+	u8 audio_cs_info[8];	/* in: IEC channel status */
+};
+
+/* audio: mute */
+struct ps3av_audio_mute {
+	u8 avport;		/* in: opt_port optical */
+	u8 reserved[3];
+	u32 mute;		/* in: mute */
+};
+
+struct ps3av_pkt_audio_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX];
+};
+
+/* audio: active/inactive */
+struct ps3av_pkt_audio_active {
+	struct ps3av_send_hdr send_hdr;
+	u32 audio_port;		/* in: audio active/inactive port */
+};
+
+/* audio: SPDIF user bit */
+struct ps3av_pkt_audio_spdif_bit {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u8 avport;		/* in: avport SPDIF only */
+	u8 reserved[3];
+	u32 audio_port;		/* in: SPDIF only */
+	u32 spdif_bit_data[12];	/* in: user bit data */
+};
+
+/* audio: audio control */
+struct ps3av_pkt_audio_ctrl {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u32 audio_ctrl_id;	/* in: control id */
+	u32 audio_ctrl_data[4];	/* in: control data */
+};
+
+/* avb:param */
+#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE	\
+	(PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \
+	 PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \
+	 PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \
+	 PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param))
+
+struct ps3av_pkt_avb_param {
+	struct ps3av_send_hdr send_hdr;
+	u16 num_of_video_pkt;
+	u16 num_of_audio_pkt;
+	u16 num_of_av_video_pkt;
+	u16 num_of_av_audio_pkt;
+	/*
+	 * The actual buffer layout depends on the fields above:
+	 *
+	 * struct ps3av_pkt_video_mode video[num_of_video_pkt];
+	 * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt];
+	 * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt];
+	 * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt];
+	 */
+	u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE];
+};
+
+
+/** command status **/
+#define PS3AV_STATUS_SUCCESS			0x0000	/* success */
+#define PS3AV_STATUS_RECEIVE_VUART_ERROR	0x0001	/* receive vuart error */
+#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL	0x0002	/* syscon communication error */
+#define PS3AV_STATUS_INVALID_COMMAND		0x0003	/* obsolete invalid CID */
+#define PS3AV_STATUS_INVALID_PORT		0x0004	/* invalid port number */
+#define PS3AV_STATUS_INVALID_VID		0x0005	/* invalid video format */
+#define PS3AV_STATUS_INVALID_COLOR_SPACE	0x0006	/* invalid video colose space */
+#define PS3AV_STATUS_INVALID_FS			0x0007	/* invalid audio sampling freq */
+#define PS3AV_STATUS_INVALID_AUDIO_CH		0x0008	/* invalid audio channel number */
+#define PS3AV_STATUS_UNSUPPORTED_VERSION	0x0009	/* version mismatch  */
+#define PS3AV_STATUS_INVALID_SAMPLE_SIZE	0x000a	/* invalid audio sample bit size */
+#define PS3AV_STATUS_FAILURE			0x000b	/* other failures */
+#define PS3AV_STATUS_UNSUPPORTED_COMMAND	0x000c	/* unsupported cid */
+#define PS3AV_STATUS_BUFFER_OVERFLOW		0x000d	/* write buffer overflow */
+#define PS3AV_STATUS_INVALID_VIDEO_PARAM	0x000e	/* invalid video param */
+#define PS3AV_STATUS_NO_SEL			0x000f	/* not exist selector */
+#define PS3AV_STATUS_INVALID_AV_PARAM		0x0010	/* invalid backend param */
+#define PS3AV_STATUS_INVALID_AUDIO_PARAM	0x0011	/* invalid audio param */
+#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE	0x0012	/* unsupported hdmi mode */
+#define PS3AV_STATUS_NO_SYNC_HEAD		0x0013	/* sync head failed */
+
+extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *);
+extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *);
+
+extern int ps3av_cmd_init(void);
+extern int ps3av_cmd_fin(void);
+extern int ps3av_cmd_av_video_mute(int, u32 *, u32);
+extern int ps3av_cmd_av_video_disable_sig(u32);
+extern int ps3av_cmd_av_tv_mute(u32, u32);
+extern int ps3av_cmd_enable_event(void);
+extern int ps3av_cmd_av_hdmi_mode(u8);
+extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32);
+extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32);
+extern int ps3av_cmd_video_format_black(u32, u32, u32);
+extern int ps3av_cmd_av_audio_mute(int, u32 *, u32);
+extern u32 ps3av_cmd_set_av_audio_param(void *, u32,
+					const struct ps3av_pkt_audio_mode *,
+					u32);
+extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32,
+				     u32, u32, u32, u32);
+extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *);
+extern int ps3av_cmd_audio_mute(int, u32 *, u32);
+extern int ps3av_cmd_audio_active(int, u32);
+extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32);
+extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *);
+extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *,
+					    u32);
+
+extern int ps3av_set_video_mode(u32);
+extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32);
+extern int ps3av_get_auto_mode(void);
+extern int ps3av_get_mode(void);
+extern int ps3av_video_mode2res(u32, u32 *, u32 *);
+extern int ps3av_video_mute(int);
+extern int ps3av_audio_mute(int);
+extern int ps3av_dev_open(void);
+extern int ps3av_dev_close(void);
+extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data),
+				    void *flip_data);
+extern void ps3av_flip_ctl(int on);
+
+#endif	/* _ASM_POWERPC_PS3AV_H_ */
diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h
new file mode 100644
index 00000000000..3f121fe4010
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3fb.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _ASM_POWERPC_PS3FB_H_
+#define _ASM_POWERPC_PS3FB_H_
+
+#include <linux/ioctl.h>
+
+/* ioctl */
+#define PS3FB_IOCTL_SETMODE       _IOW('r',  1, int) /* set video mode */
+#define PS3FB_IOCTL_GETMODE       _IOR('r',  2, int) /* get video mode */
+#define PS3FB_IOCTL_SCREENINFO    _IOR('r',  3, int) /* get screen info */
+#define PS3FB_IOCTL_ON            _IO('r', 4)        /* use IOCTL_FSEL */
+#define PS3FB_IOCTL_OFF           _IO('r', 5)        /* return to normal-flip */
+#define PS3FB_IOCTL_FSEL          _IOW('r', 6, int)  /* blit and flip request */
+
+#ifndef FBIO_WAITFORVSYNC
+#define FBIO_WAITFORVSYNC         _IOW('F', 0x20, __u32) /* wait for vsync */
+#endif
+
+struct ps3fb_ioctl_res {
+	__u32 xres; /* frame buffer x_size */
+	__u32 yres; /* frame buffer y_size */
+	__u32 xoff; /* margine x  */
+	__u32 yoff; /* margine y */
+	__u32 num_frames; /* num of frame buffers */
+};
+
+#endif /* _ASM_POWERPC_PS3FB_H_ */
diff --git a/arch/powerpc/include/asm/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h
new file mode 100644
index 00000000000..6fcaf714fa5
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3stor.h
@@ -0,0 +1,71 @@
+/*
+ * PS3 Storage Devices
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _ASM_POWERPC_PS3STOR_H_
+#define _ASM_POWERPC_PS3STOR_H_
+
+#include <linux/interrupt.h>
+
+#include <asm/ps3.h>
+
+
+struct ps3_storage_region {
+	unsigned int id;
+	u64 start;
+	u64 size;
+};
+
+struct ps3_storage_device {
+	struct ps3_system_bus_device sbd;
+
+	struct ps3_dma_region dma_region;
+	unsigned int irq;
+	u64 blk_size;
+
+	u64 tag;
+	u64 lv1_status;
+	struct completion done;
+
+	unsigned long bounce_size;
+	void *bounce_buf;
+	u64 bounce_lpar;
+	dma_addr_t bounce_dma;
+
+	unsigned int num_regions;
+	unsigned long accessible_regions;
+	unsigned int region_idx;		/* first accessible region */
+	struct ps3_storage_region regions[0];	/* Must be last */
+};
+
+static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev)
+{
+	return container_of(dev, struct ps3_storage_device, sbd.core);
+}
+
+extern int ps3stor_setup(struct ps3_storage_device *dev,
+			 irq_handler_t handler);
+extern void ps3stor_teardown(struct ps3_storage_device *dev);
+extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar,
+				      u64 start_sector, u64 sectors,
+				      int write);
+extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd,
+				u64 arg1, u64 arg2, u64 arg3, u64 arg4);
+
+#endif /* _ASM_POWERPC_PS3STOR_H_ */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
new file mode 100644
index 00000000000..734e0754fb9
--- /dev/null
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -0,0 +1,293 @@
+#ifndef _ASM_POWERPC_PTRACE_H
+#define _ASM_POWERPC_PTRACE_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below.  This simplifies arch/powerpc/kernel/ptrace.c.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long gpr[32];
+	unsigned long nip;
+	unsigned long msr;
+	unsigned long orig_gpr3;	/* Used for restarting system calls */
+	unsigned long ctr;
+	unsigned long link;
+	unsigned long xer;
+	unsigned long ccr;
+#ifdef __powerpc64__
+	unsigned long softe;		/* Soft enabled/disabled */
+#else
+	unsigned long mq;		/* 601 only (not used at present) */
+					/* Used on APUS to hold IPL value. */
+#endif
+	unsigned long trap;		/* Reason for being here */
+	/* N.B. for critical exceptions on 4xx, the dar and dsisr
+	   fields are overloaded to hold srr0 and srr1. */
+	unsigned long dar;		/* Fault registers */
+	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
+	unsigned long result;		/* Result of a system call */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifdef __powerpc64__
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
+#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + \
+					STACK_FRAME_OVERHEAD + 288)
+#define STACK_FRAME_MARKER	12
+
+/* Size of dummy stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	128
+#define __SIGNAL_FRAMESIZE32	64
+
+#else /* __powerpc64__ */
+
+#define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE	1	/* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x72656773)
+#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
+#define STACK_FRAME_MARKER	2
+
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	64
+
+#endif /* __powerpc64__ */
+
+#ifndef __ASSEMBLY__
+
+#define instruction_pointer(regs) ((regs)->nip)
+#define user_stack_pointer(regs) ((regs)->gpr[1])
+#define regs_return_value(regs) ((regs)->gpr[3])
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#ifdef __powerpc64__
+#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
+#else
+#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
+#endif
+
+#define force_successful_syscall_return()   \
+	do { \
+		set_thread_flag(TIF_NOERROR); \
+	} while(0)
+
+struct task_struct;
+extern unsigned long ptrace_get_reg(struct task_struct *task, int regno);
+extern int ptrace_put_reg(struct task_struct *task, int regno,
+			  unsigned long data);
+
+/*
+ * We use the least-significant bit of the trap field to indicate
+ * whether we have saved the full set of registers, or only a
+ * partial set.  A 1 there means the partial set.
+ * On 4xx we use the next bit to indicate whether the exception
+ * is a critical exception (1 means it is).
+ */
+#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
+#ifndef __powerpc64__
+#define IS_CRITICAL_EXC(regs)	(((regs)->trap & 2) != 0)
+#define IS_MCHECK_EXC(regs)	(((regs)->trap & 4) != 0)
+#define IS_DEBUG_EXC(regs)	(((regs)->trap & 8) != 0)
+#endif /* ! __powerpc64__ */
+#define TRAP(regs)		((regs)->trap & ~0xF)
+#ifdef __powerpc64__
+#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)
+#else
+#define CHECK_FULL_REGS(regs)						      \
+do {									      \
+	if ((regs)->trap & 1)						      \
+		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
+} while (0)
+#endif /* __powerpc64__ */
+
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ * These can't be changed without breaking binary compatibility
+ * with MkLinux, etc.
+ */
+#define PT_R0	0
+#define PT_R1	1
+#define PT_R2	2
+#define PT_R3	3
+#define PT_R4	4
+#define PT_R5	5
+#define PT_R6	6
+#define PT_R7	7
+#define PT_R8	8
+#define PT_R9	9
+#define PT_R10	10
+#define PT_R11	11
+#define PT_R12	12
+#define PT_R13	13
+#define PT_R14	14
+#define PT_R15	15
+#define PT_R16	16
+#define PT_R17	17
+#define PT_R18	18
+#define PT_R19	19
+#define PT_R20	20
+#define PT_R21	21
+#define PT_R22	22
+#define PT_R23	23
+#define PT_R24	24
+#define PT_R25	25
+#define PT_R26	26
+#define PT_R27	27
+#define PT_R28	28
+#define PT_R29	29
+#define PT_R30	30
+#define PT_R31	31
+
+#define PT_NIP	32
+#define PT_MSR	33
+#define PT_ORIG_R3 34
+#define PT_CTR	35
+#define PT_LNK	36
+#define PT_XER	37
+#define PT_CCR	38
+#ifndef __powerpc64__
+#define PT_MQ	39
+#else
+#define PT_SOFTE 39
+#endif
+#define PT_TRAP	40
+#define PT_DAR	41
+#define PT_DSISR 42
+#define PT_RESULT 43
+#define PT_REGS_COUNT 44
+
+#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
+
+#ifndef __powerpc64__
+
+#define PT_FPR31 (PT_FPR0 + 2*31)
+#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+
+#else /* __powerpc64__ */
+
+#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
+
+#ifdef __KERNEL__
+#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
+#endif
+
+#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
+#define PT_VSCR (PT_VR0 + 32*2 + 1)
+#define PT_VRSAVE (PT_VR0 + 33*2)
+
+#ifdef __KERNEL__
+#define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
+#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
+#define PT_VRSAVE_32 (PT_VR0 + 33*4)
+#endif
+
+/*
+ * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
+ */
+#define PT_VSR0 150	/* each VSR reg occupies 2 slots in 64-bit */
+#define PT_VSR31 (PT_VSR0 + 2*31)
+#ifdef __KERNEL__
+#define PT_VSR0_32 300 	/* each VSR reg occupies 4 slots in 32-bit */
+#endif
+#endif /* __powerpc64__ */
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the
+ * corresponding vector registers.  Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword.  Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface.  This allows signal handling and ptrace to use the same
+ * structures.  This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+#define PTRACE_GETVRREGS	18
+#define PTRACE_SETVRREGS	19
+
+/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
+ * spefscr, in one go */
+#define PTRACE_GETEVRREGS	20
+#define PTRACE_SETEVRREGS	21
+
+/* Get the first 32 128bit VSX registers */
+#define PTRACE_GETVSRREGS	27
+#define PTRACE_SETVSRREGS	28
+
+/*
+ * Get or set a debug register. The first 16 are DABR registers and the
+ * second 16 are IABR registers.
+ */
+#define PTRACE_GET_DEBUGREG	25
+#define PTRACE_SET_DEBUGREG	26
+
+/* (new) PTRACE requests using the same numbers as x86 and the same
+ * argument ordering. Additionally, they support more registers too
+ */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+
+/* (old) PTRACE requests with inverted arguments */
+#define PPC_PTRACE_GETREGS	0x99	/* Get GPRs 0 - 31 */
+#define PPC_PTRACE_SETREGS	0x98	/* Set GPRs 0 - 31 */
+#define PPC_PTRACE_GETFPREGS	0x97	/* Get FPRs 0 - 31 */
+#define PPC_PTRACE_SETFPREGS	0x96	/* Set FPRs 0 - 31 */
+
+/* Calls to trace a 64bit program from a 32bit program */
+#define PPC_PTRACE_PEEKTEXT_3264 0x95
+#define PPC_PTRACE_PEEKDATA_3264 0x94
+#define PPC_PTRACE_POKETEXT_3264 0x93
+#define PPC_PTRACE_POKEDATA_3264 0x92
+#define PPC_PTRACE_PEEKUSR_3264  0x91
+#define PPC_PTRACE_POKEUSR_3264  0x90
+
+#endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
new file mode 100644
index 00000000000..edee15d269e
--- /dev/null
+++ b/arch/powerpc/include/asm/qe.h
@@ -0,0 +1,642 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <asm/cpm.h>
+#include <asm/immap_qe.h>
+
+#define QE_NUM_OF_SNUM	28
+#define QE_NUM_OF_BRGS	16
+#define QE_NUM_OF_PORTS	1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM		0
+#define MEM_PART_SECONDARY	1
+#define MEM_PART_MURAM		2
+
+/* Clocks and BRGs */
+enum qe_clock {
+	QE_CLK_NONE = 0,
+	QE_BRG1,		/* Baud Rate Generator 1 */
+	QE_BRG2,		/* Baud Rate Generator 2 */
+	QE_BRG3,		/* Baud Rate Generator 3 */
+	QE_BRG4,		/* Baud Rate Generator 4 */
+	QE_BRG5,		/* Baud Rate Generator 5 */
+	QE_BRG6,		/* Baud Rate Generator 6 */
+	QE_BRG7,		/* Baud Rate Generator 7 */
+	QE_BRG8,		/* Baud Rate Generator 8 */
+	QE_BRG9,		/* Baud Rate Generator 9 */
+	QE_BRG10,		/* Baud Rate Generator 10 */
+	QE_BRG11,		/* Baud Rate Generator 11 */
+	QE_BRG12,		/* Baud Rate Generator 12 */
+	QE_BRG13,		/* Baud Rate Generator 13 */
+	QE_BRG14,		/* Baud Rate Generator 14 */
+	QE_BRG15,		/* Baud Rate Generator 15 */
+	QE_BRG16,		/* Baud Rate Generator 16 */
+	QE_CLK1,		/* Clock 1 */
+	QE_CLK2,		/* Clock 2 */
+	QE_CLK3,		/* Clock 3 */
+	QE_CLK4,		/* Clock 4 */
+	QE_CLK5,		/* Clock 5 */
+	QE_CLK6,		/* Clock 6 */
+	QE_CLK7,		/* Clock 7 */
+	QE_CLK8,		/* Clock 8 */
+	QE_CLK9,		/* Clock 9 */
+	QE_CLK10,		/* Clock 10 */
+	QE_CLK11,		/* Clock 11 */
+	QE_CLK12,		/* Clock 12 */
+	QE_CLK13,		/* Clock 13 */
+	QE_CLK14,		/* Clock 14 */
+	QE_CLK15,		/* Clock 15 */
+	QE_CLK16,		/* Clock 16 */
+	QE_CLK17,		/* Clock 17 */
+	QE_CLK18,		/* Clock 18 */
+	QE_CLK19,		/* Clock 19 */
+	QE_CLK20,		/* Clock 20 */
+	QE_CLK21,		/* Clock 21 */
+	QE_CLK22,		/* Clock 22 */
+	QE_CLK23,		/* Clock 23 */
+	QE_CLK24,		/* Clock 24 */
+	QE_CLK_DUMMY
+};
+
+static inline bool qe_clock_is_brg(enum qe_clock clk)
+{
+	return clk >= QE_BRG1 && clk <= QE_BRG16;
+}
+
+extern spinlock_t cmxgcr_lock;
+
+/* Export QE common operations */
+extern void __init qe_reset(void);
+
+/* QE PIO */
+#define QE_PIO_PINS 32
+
+struct qe_pio_regs {
+	__be32	cpodr;		/* Open drain register */
+	__be32	cpdata;		/* Data register */
+	__be32	cpdir1;		/* Direction register */
+	__be32	cpdir2;		/* Direction register */
+	__be32	cppar1;		/* Pin assignment register */
+	__be32	cppar2;		/* Pin assignment register */
+#ifdef CONFIG_PPC_85xx
+	u8	pad[8];
+#endif
+};
+
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+#define QE_PIO_DIR_IN	2
+#define QE_PIO_DIR_OUT	1
+extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
+				int dir, int open_drain, int assignment,
+				int has_irq);
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+			     int assignment, int has_irq);
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
+
+/* QE internal API */
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+/* we actually use cpm_muram implementation, define this for convenience */
+#define qe_muram_init cpm_muram_init
+#define qe_muram_alloc cpm_muram_alloc
+#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
+#define qe_muram_free cpm_muram_free
+#define qe_muram_addr cpm_muram_addr
+#define qe_muram_offset cpm_muram_offset
+
+/* Structure that defines QE firmware binary files.
+ *
+ * See Documentation/powerpc/qe-firmware.txt for a description of these
+ * fields.
+ */
+struct qe_firmware {
+	struct qe_header {
+		__be32 length;  /* Length of the entire structure, in bytes */
+		u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
+		u8 version;     /* Version of this layout. First ver is '1' */
+	} header;
+	u8 id[62];      /* Null-terminated identifier string */
+	u8 split;	/* 0 = shared I-RAM, 1 = split I-RAM */
+	u8 count;       /* Number of microcode[] structures */
+	struct {
+		__be16 model;   	/* The SOC model  */
+		u8 major;       	/* The SOC revision major */
+		u8 minor;       	/* The SOC revision minor */
+	} __attribute__ ((packed)) soc;
+	u8 padding[4];			/* Reserved, for alignment */
+	__be64 extended_modes;		/* Extended modes */
+	__be32 vtraps[8];		/* Virtual trap addresses */
+	u8 reserved[4];			/* Reserved, for future expansion */
+	struct qe_microcode {
+		u8 id[32];      	/* Null-terminated identifier */
+		__be32 traps[16];       /* Trap addresses, 0 == ignore */
+		__be32 eccr;    	/* The value for the ECCR register */
+		__be32 iram_offset;     /* Offset into I-RAM for the code */
+		__be32 count;   	/* Number of 32-bit words of the code */
+		__be32 code_offset;     /* Offset of the actual microcode */
+		u8 major;       	/* The microcode version major */
+		u8 minor;       	/* The microcode version minor */
+		u8 revision;		/* The microcode version revision */
+		u8 padding;		/* Reserved, for alignment */
+		u8 reserved[4];		/* Reserved, for future expansion */
+	} __attribute__ ((packed)) microcode[1];
+	/* All microcode binaries should be located here */
+	/* CRC32 should be located here, after the microcode binaries */
+} __attribute__ ((packed));
+
+struct qe_firmware_info {
+	char id[64];		/* Firmware name */
+	u32 vtraps[8];		/* Virtual trap addresses */
+	u64 extended_modes;	/* Extended modes */
+};
+
+/* Upload a firmware to the QE */
+int qe_upload_firmware(const struct qe_firmware *firmware);
+
+/* Obtain information on the uploaded firmware */
+struct qe_firmware_info *qe_get_firmware_info(void);
+
+/* QE USB */
+int qe_usb_clock_set(enum qe_clock clk, int rate);
+
+/* Buffer descriptors */
+struct qe_bd {
+	__be16 status;
+	__be16 length;
+	__be32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK	0xffff0000
+#define BD_LENGTH_MASK	0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN	16	/* ??? */
+#define QE_ALIGNMENT_OF_BD	8
+#define QE_ALIGNMENT_OF_PRAM	64
+
+/* RISC allocation */
+enum qe_risc_allocation {
+	QE_RISC_ALLOCATION_RISC1 = 1,	/* RISC 1 */
+	QE_RISC_ALLOCATION_RISC2 = 2,	/* RISC 2 */
+	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3	/* Dynamically choose
+						   RISC 1 or RISC 2 */
+};
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= 0x3f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 8 bytes */
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= 0x5f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+		= 0x0,/* not used */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,	/* 8 bytes */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,	/* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+	u16 tm_base;		/* QE timer table base adr */
+	u16 tm_ptr;		/* QE timer table pointer */
+	u16 r_tmr;		/* QE timer mode register */
+	u16 r_tmv;		/* QE timer valid register */
+	u32 tm_cmd;		/* QE timer cmd register */
+	u32 tm_cnt;		/* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE	8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+	u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+	COMM_DIR_NONE = 0,
+	COMM_DIR_RX = 1,
+	COMM_DIR_TX = 2,
+	COMM_DIR_RX_AND_TX = 3
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG		0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXUCR_GRANT			0x00008000
+#define QE_CMXUCR_TSA			0x00004000
+#define QE_CMXUCR_BKPT			0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG		0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXGCR_USBCS			0x0000000f
+#define QE_CMXGCR_USBCS_CLK3		0x1
+#define QE_CMXGCR_USBCS_CLK5		0x2
+#define QE_CMXGCR_USBCS_CLK7		0x3
+#define QE_CMXGCR_USBCS_CLK9		0x4
+#define QE_CMXGCR_USBCS_CLK13		0x5
+#define QE_CMXGCR_USBCS_CLK17		0x6
+#define QE_CMXGCR_USBCS_CLK19		0x7
+#define QE_CMXGCR_USBCS_CLK21		0x8
+#define QE_CMXGCR_USBCS_BRG9		0x9
+#define QE_CMXGCR_USBCS_BRG10		0xa
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG			0x00010000
+#define QE_RESET			0x80000000
+#define QE_INIT_TX_RX			0x00000000
+#define QE_INIT_RX			0x00000001
+#define QE_INIT_TX			0x00000002
+#define QE_ENTER_HUNT_MODE		0x00000003
+#define QE_STOP_TX			0x00000004
+#define QE_GRACEFUL_STOP_TX		0x00000005
+#define QE_RESTART_TX			0x00000006
+#define QE_CLOSE_RX_BD			0x00000007
+#define QE_SWITCH_COMMAND		0x00000007
+#define QE_SET_GROUP_ADDRESS		0x00000008
+#define QE_START_IDMA			0x00000009
+#define QE_MCC_STOP_RX			0x00000009
+#define QE_ATM_TRANSMIT			0x0000000a
+#define QE_HPAC_CLEAR_ALL		0x0000000b
+#define QE_GRACEFUL_STOP_RX		0x0000001a
+#define QE_RESTART_RX			0x0000001b
+#define QE_HPAC_SET_PRIORITY		0x0000010b
+#define QE_HPAC_STOP_TX			0x0000020b
+#define QE_HPAC_STOP_RX			0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX	0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX	0x0000050b
+#define QE_HPAC_START_TX		0x0000060b
+#define QE_HPAC_START_RX		0x0000070b
+#define QE_USB_STOP_TX			0x0000000a
+#define QE_USB_RESTART_TX		0x0000000c
+#define QE_QMC_STOP_TX			0x0000000c
+#define QE_QMC_STOP_RX			0x0000000d
+#define QE_SS7_SU_FIL_RESET		0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS			0x0000000a
+#define QE_MCC_INIT_TX_RX_16		0x00000003
+#define QE_MCC_STOP_TX			0x00000004
+#define QE_MCC_INIT_TX_1		0x00000005
+#define QE_MCC_INIT_RX_1		0x00000006
+#define QE_MCC_RESET			0x00000007
+#define QE_SET_TIMER			0x00000008
+#define QE_RANDOM_NUMBER		0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT	0x00000011
+#define QE_ASSIGN_PAGE			0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY	0x00000013
+#define QE_START_FLOW_CONTROL		0x00000014
+#define QE_STOP_FLOW_CONTROL		0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
+
+#define QE_ASSIGN_RISC			0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT		6
+#define QE_CR_MCN_USB_SHIFT		4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT	8
+#define QE_CR_SNUM_SHIFT		17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID		0x00000000
+#define QE_CR_SUBBLOCK_USB		0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
+#define QE_CR_SUBBLOCK_MCC1		0x03800000
+#define QE_CR_SUBBLOCK_MCC2		0x03a00000
+#define QE_CR_SUBBLOCK_MCC3		0x03000000
+#define QE_CR_SUBBLOCK_IDMA1		0x02800000
+#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
+#define QE_CR_SUBBLOCK_HPAC		0x01e00000
+#define QE_CR_SUBBLOCK_SPI1		0x01400000
+#define QE_CR_SUBBLOCK_SPI2		0x01600000
+#define QE_CR_SUBBLOCK_RAND		0x01c00000
+#define QE_CR_SUBBLOCK_TIMER		0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
+#define QE_CR_PROTOCOL_QMC		0x02
+#define QE_CR_PROTOCOL_UART		0x04
+#define QE_CR_PROTOCOL_ATM_POS		0x0A
+#define QE_CR_PROTOCOL_ETHERNET		0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE		0x00010000
+#define QE_BRGC_DIVISOR_SHIFT	1
+#define QE_BRGC_DIVISOR_MAX	0xFFF
+#define QE_BRGC_DIV16		1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS	0x80
+#define QE_GTCFR1_STP2	0x20
+#define QE_GTCFR1_RST2	0x10
+#define QE_GTCFR1_GM2	0x08
+#define QE_GTCFR1_GM1	0x04
+#define QE_GTCFR1_STP1	0x02
+#define QE_GTCFR1_RST1	0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1	0x02000000
+#define QE_SDSR_BER2	0x01000000
+
+#define QE_SDMR_GLB_1_MSK	0x80000000
+#define QE_SDMR_ADR_SEL		0x20000000
+#define QE_SDMR_BER1_MSK	0x02000000
+#define QE_SDMR_BER2_MSK	0x01000000
+#define QE_SDMR_EB1_MSK		0x00800000
+#define QE_SDMR_ER1_MSK		0x00080000
+#define QE_SDMR_ER2_MSK		0x00040000
+#define QE_SDMR_CEN_MASK	0x0000E000
+#define QE_SDMR_SBER_1		0x00000200
+#define QE_SDMR_SBER_2		0x00000200
+#define QE_SDMR_EB1_PR_MASK	0x000000C0
+#define QE_SDMR_ER1_PR		0x00000008
+
+#define QE_SDMR_CEN_SHIFT	13
+#define QE_SDMR_EB1_PR_SHIFT	6
+
+#define QE_SDTM_MSNUM_SHIFT	24
+
+#define QE_SDEBCR_BA_MASK	0x01FFFFFF
+
+/* Communication Processor */
+#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
+
+/* UPC */
+#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
+#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
+#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
+#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
+
+/* UCC GUEMR register */
+#define UCC_GUEMR_MODE_MASK_RX	0x02
+#define UCC_GUEMR_MODE_FAST_RX	0x02
+#define UCC_GUEMR_MODE_SLOW_RX	0x00
+#define UCC_GUEMR_MODE_MASK_TX	0x01
+#define UCC_GUEMR_MODE_FAST_TX	0x01
+#define UCC_GUEMR_MODE_SLOW_TX	0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
+#define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
+					   must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+	__be16 rbase;		/* RX BD base address */
+	__be16 tbase;		/* TX BD base address */
+	u8 rbmr;		/* RX bus mode register (same as CPM's RFCR) */
+	u8 tbmr;		/* TX bus mode register (same as CPM's TFCR) */
+	__be16 mrblr;		/* Rx buffer length */
+	__be32 rstate;		/* Rx internal state */
+	__be32 rptr;		/* Rx internal data pointer */
+	__be16 rbptr;		/* rb BD Pointer */
+	__be16 rcount;		/* Rx internal byte count */
+	__be32 rtemp;		/* Rx temp */
+	__be32 tstate;		/* Tx internal state */
+	__be32 tptr;		/* Tx internal data pointer */
+	__be16 tbptr;		/* Tx BD pointer */
+	__be16 tcount;		/* Tx byte count */
+	__be32 ttemp;		/* Tx temp */
+	__be32 rcrc;		/* temp receive CRC */
+	__be32 tcrc;		/* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_SAM_QMC		0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM	0x00008000
+#define UCC_SLOW_GUMR_H_REVD		0x00002000
+#define UCC_SLOW_GUMR_H_TRX		0x00001000
+#define UCC_SLOW_GUMR_H_TTX		0x00000800
+#define UCC_SLOW_GUMR_H_CDP		0x00000400
+#define UCC_SLOW_GUMR_H_CTSP		0x00000200
+#define UCC_SLOW_GUMR_H_CDS		0x00000100
+#define UCC_SLOW_GUMR_H_CTSS		0x00000080
+#define UCC_SLOW_GUMR_H_TFL		0x00000040
+#define UCC_SLOW_GUMR_H_RFW		0x00000020
+#define UCC_SLOW_GUMR_H_TXSY		0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC		0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC		0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC		0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM		0x00000002
+#define UCC_SLOW_GUMR_H_RSYN		0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI		0x10000000
+#define UCC_SLOW_GUMR_L_RINV		0x02000000
+#define UCC_SLOW_GUMR_L_TINV		0x01000000
+#define UCC_SLOW_GUMR_L_TEND		0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK	0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32	        0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16	        0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8	        0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1	        0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK	0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32		0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16	        0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8	        0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1		0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI	0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI	0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK	0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE	        0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO	0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP	0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM	0x00000000
+#define UCC_SLOW_GUMR_L_ENR		0x00000020
+#define UCC_SLOW_GUMR_L_ENT		0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK	0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC	0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC	0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART	0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI	0x20000000
+#define UCC_FAST_GUMR_TRX	0x10000000
+#define UCC_FAST_GUMR_TTX	0x08000000
+#define UCC_FAST_GUMR_CDP	0x04000000
+#define UCC_FAST_GUMR_CTSP	0x02000000
+#define UCC_FAST_GUMR_CDS	0x01000000
+#define UCC_FAST_GUMR_CTSS	0x00800000
+#define UCC_FAST_GUMR_TXSY	0x00020000
+#define UCC_FAST_GUMR_RSYN	0x00010000
+#define UCC_FAST_GUMR_RTSM	0x00002000
+#define UCC_FAST_GUMR_REVD	0x00000400
+#define UCC_FAST_GUMR_ENR	0x00000020
+#define UCC_FAST_GUMR_ENT	0x00000010
+
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB	0x0200
+#define UCC_UART_UCCE_IDLE	0x0100
+#define UCC_UART_UCCE_GRA	0x0080
+#define UCC_UART_UCCE_BRKE	0x0040
+#define UCC_UART_UCCE_BRKS	0x0020
+#define UCC_UART_UCCE_CCR	0x0008
+#define UCC_UART_UCCE_BSY	0x0004
+#define UCC_UART_UCCE_TX	0x0002
+#define UCC_UART_UCCE_RX	0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR	0x1000
+#define UCC_HDLC_UCCE_GLT	0x0800
+#define UCC_HDLC_UCCE_IDLE	0x0100
+#define UCC_HDLC_UCCE_BRKE	0x0040
+#define UCC_HDLC_UCCE_BRKS	0x0020
+#define UCC_HDLC_UCCE_TXE	0x0010
+#define UCC_HDLC_UCCE_RXF	0x0008
+#define UCC_HDLC_UCCE_BSY	0x0004
+#define UCC_HDLC_UCCE_TXB	0x0002
+#define UCC_HDLC_UCCE_RXB	0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA	0x0080
+#define UCC_BISYNC_UCCE_TXE	0x0010
+#define UCC_BISYNC_UCCE_RCH	0x0008
+#define UCC_BISYNC_UCCE_BSY	0x0004
+#define UCC_BISYNC_UCCE_TXB	0x0002
+#define UCC_BISYNC_UCCE_RXB	0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD       0x80000000
+#define UCC_GETH_UCCE_SCAR      0x40000000
+#define UCC_GETH_UCCE_GRA       0x20000000
+#define UCC_GETH_UCCE_CBPR      0x10000000
+#define UCC_GETH_UCCE_BSY       0x08000000
+#define UCC_GETH_UCCE_RXC       0x04000000
+#define UCC_GETH_UCCE_TXC       0x02000000
+#define UCC_GETH_UCCE_TXE       0x01000000
+#define UCC_GETH_UCCE_TXB7      0x00800000
+#define UCC_GETH_UCCE_TXB6      0x00400000
+#define UCC_GETH_UCCE_TXB5      0x00200000
+#define UCC_GETH_UCCE_TXB4      0x00100000
+#define UCC_GETH_UCCE_TXB3      0x00080000
+#define UCC_GETH_UCCE_TXB2      0x00040000
+#define UCC_GETH_UCCE_TXB1      0x00020000
+#define UCC_GETH_UCCE_TXB0      0x00010000
+#define UCC_GETH_UCCE_RXB7      0x00008000
+#define UCC_GETH_UCCE_RXB6      0x00004000
+#define UCC_GETH_UCCE_RXB5      0x00002000
+#define UCC_GETH_UCCE_RXB4      0x00001000
+#define UCC_GETH_UCCE_RXB3      0x00000800
+#define UCC_GETH_UCCE_RXB2      0x00000400
+#define UCC_GETH_UCCE_RXB1      0x00000200
+#define UCC_GETH_UCCE_RXB0      0x00000100
+#define UCC_GETH_UCCE_RXF7      0x00000080
+#define UCC_GETH_UCCE_RXF6      0x00000040
+#define UCC_GETH_UCCE_RXF5      0x00000020
+#define UCC_GETH_UCCE_RXF4      0x00000010
+#define UCC_GETH_UCCE_RXF3      0x00000008
+#define UCC_GETH_UCCE_RXF2      0x00000004
+#define UCC_GETH_UCCE_RXF1      0x00000002
+#define UCC_GETH_UCCE_RXF0      0x00000001
+
+/* UPSMR, when used as a UART */
+#define UCC_UART_UPSMR_FLC		0x8000
+#define UCC_UART_UPSMR_SL		0x4000
+#define UCC_UART_UPSMR_CL_MASK		0x3000
+#define UCC_UART_UPSMR_CL_8		0x3000
+#define UCC_UART_UPSMR_CL_7		0x2000
+#define UCC_UART_UPSMR_CL_6		0x1000
+#define UCC_UART_UPSMR_CL_5		0x0000
+#define UCC_UART_UPSMR_UM_MASK		0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL	0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI	0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI	0x0c00
+#define UCC_UART_UPSMR_FRZ		0x0200
+#define UCC_UART_UPSMR_RZS		0x0100
+#define UCC_UART_UPSMR_SYN		0x0080
+#define UCC_UART_UPSMR_DRT		0x0040
+#define UCC_UART_UPSMR_PEN		0x0010
+#define UCC_UART_UPSMR_RPM_MASK		0x000c
+#define UCC_UART_UPSMR_RPM_ODD		0x0000
+#define UCC_UART_UPSMR_RPM_LOW		0x0004
+#define UCC_UART_UPSMR_RPM_EVEN		0x0008
+#define UCC_UART_UPSMR_RPM_HIGH		0x000C
+#define UCC_UART_UPSMR_TPM_MASK		0x0003
+#define UCC_UART_UPSMR_TPM_ODD		0x0000
+#define UCC_UART_UPSMR_TPM_LOW		0x0001
+#define UCC_UART_UPSMR_TPM_EVEN		0x0002
+#define UCC_UART_UPSMR_TPM_HIGH		0x0003
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD	0x8000
+#define UCC_FAST_TOD	0x8000
+
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL		0x20
+#define UCC_BMR_BO_BE		0x10
+#define UCC_BMR_CETM		0x04
+#define UCC_BMR_DTB		0x02
+#define UCC_BMR_BDB		0x01
+
+/* Function code masks */
+#define FC_GBL				0x20
+#define FC_DTB_LCL			0x02
+#define UCC_FAST_FUNCTION_CODE_GBL	0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL	0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL	0x01
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
new file mode 100644
index 00000000000..56a7745ca34
--- /dev/null
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+#define NUM_OF_QE_IC_GROUPS	6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W			0x00000001
+#define QE_IC_SPREADMODE_GRP_X			0x00000002
+#define QE_IC_SPREADMODE_GRP_Y			0x00000004
+#define QE_IC_SPREADMODE_GRP_Z			0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
+
+#define QE_IC_LOW_SIGNAL			0x00000100
+#define QE_IC_HIGH_SIGNAL			0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
+	QE_IC_GRP_X,		/* QE interrupt controller group X */
+	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
+	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
+	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
+	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
+};
+
+void qe_ic_init(struct device_node *node, unsigned int flags,
+		void (*low_handler)(unsigned int irq, struct irq_desc *desc),
+		void (*high_handler)(unsigned int irq, struct irq_desc *desc));
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+struct qe_ic;
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
+
+static inline void qe_ic_cascade_low_ipic(unsigned int irq,
+					  struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_high_ipic(unsigned int irq,
+					   struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_low_mpic(unsigned int irq,
+					  struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+static inline void qe_ic_cascade_high_mpic(unsigned int irq,
+					   struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
+					    struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq;
+
+	cascade_irq = qe_ic_get_high_irq(qe_ic);
+	if (cascade_irq == NO_IRQ)
+		cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
new file mode 100644
index 00000000000..c6d1ab65077
--- /dev/null
+++ b/arch/powerpc/include/asm/reg.h
@@ -0,0 +1,788 @@
+/*
+ * Contains the definition of registers common to all PowerPC variants.
+ * If a register definition has been changed in a different PowerPC
+ * variant, we will case it in #ifndef XXX ... #endif, and have the
+ * number used in the Programming Environments Manual For 32-Bit
+ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
+ */
+
+#ifndef _ASM_POWERPC_REG_H
+#define _ASM_POWERPC_REG_H
+#ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <asm/cputable.h>
+
+/* Pickup Book E specific registers. */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include <asm/reg_booke.h>
+#endif /* CONFIG_BOOKE || CONFIG_40x */
+
+#ifdef CONFIG_FSL_EMB_PERFMON
+#include <asm/reg_fsl_emb.h>
+#endif
+
+#ifdef CONFIG_8xx
+#include <asm/reg_8xx.h>
+#endif /* CONFIG_8xx */
+
+#define MSR_SF_LG	63              /* Enable 64 bit mode */
+#define MSR_ISF_LG	61              /* Interrupt 64b mode valid on 630 */
+#define MSR_HV_LG 	60              /* Hypervisor state */
+#define MSR_VEC_LG	25	        /* Enable AltiVec */
+#define MSR_VSX_LG	23		/* Enable VSX */
+#define MSR_POW_LG	18		/* Enable Power Management */
+#define MSR_WE_LG	18		/* Wait State Enable */
+#define MSR_TGPR_LG	17		/* TLB Update registers in use */
+#define MSR_CE_LG	17		/* Critical Interrupt Enable */
+#define MSR_ILE_LG	16		/* Interrupt Little Endian */
+#define MSR_EE_LG	15		/* External Interrupt Enable */
+#define MSR_PR_LG	14		/* Problem State / Privilege Level */
+#define MSR_FP_LG	13		/* Floating Point enable */
+#define MSR_ME_LG	12		/* Machine Check Enable */
+#define MSR_FE0_LG	11		/* Floating Exception mode 0 */
+#define MSR_SE_LG	10		/* Single Step */
+#define MSR_BE_LG	9		/* Branch Trace */
+#define MSR_DE_LG	9 		/* Debug Exception Enable */
+#define MSR_FE1_LG	8		/* Floating Exception mode 1 */
+#define MSR_IP_LG	6		/* Exception prefix 0x000/0xFFF */
+#define MSR_IR_LG	5 		/* Instruction Relocate */
+#define MSR_DR_LG	4 		/* Data Relocate */
+#define MSR_PE_LG	3		/* Protection Enable */
+#define MSR_PX_LG	2		/* Protection Exclusive Mode */
+#define MSR_PMM_LG	2		/* Performance monitor */
+#define MSR_RI_LG	1		/* Recoverable Exception */
+#define MSR_LE_LG	0 		/* Little Endian */
+
+#ifdef __ASSEMBLY__
+#define __MASK(X)	(1<<(X))
+#else
+#define __MASK(X)	(1UL<<(X))
+#endif
+
+#ifdef CONFIG_PPC64
+#define MSR_SF		__MASK(MSR_SF_LG)	/* Enable 64 bit mode */
+#define MSR_ISF		__MASK(MSR_ISF_LG)	/* Interrupt 64b mode valid on 630 */
+#define MSR_HV 		__MASK(MSR_HV_LG)	/* Hypervisor state */
+#else
+/* so tests for these bits fail on 32-bit */
+#define MSR_SF		0
+#define MSR_ISF		0
+#define MSR_HV		0
+#endif
+
+#define MSR_VEC		__MASK(MSR_VEC_LG)	/* Enable AltiVec */
+#define MSR_VSX		__MASK(MSR_VSX_LG)	/* Enable VSX */
+#define MSR_POW		__MASK(MSR_POW_LG)	/* Enable Power Management */
+#define MSR_WE		__MASK(MSR_WE_LG)	/* Wait State Enable */
+#define MSR_TGPR	__MASK(MSR_TGPR_LG)	/* TLB Update registers in use */
+#define MSR_CE		__MASK(MSR_CE_LG)	/* Critical Interrupt Enable */
+#define MSR_ILE		__MASK(MSR_ILE_LG)	/* Interrupt Little Endian */
+#define MSR_EE		__MASK(MSR_EE_LG)	/* External Interrupt Enable */
+#define MSR_PR		__MASK(MSR_PR_LG)	/* Problem State / Privilege Level */
+#define MSR_FP		__MASK(MSR_FP_LG)	/* Floating Point enable */
+#define MSR_ME		__MASK(MSR_ME_LG)	/* Machine Check Enable */
+#define MSR_FE0		__MASK(MSR_FE0_LG)	/* Floating Exception mode 0 */
+#define MSR_SE		__MASK(MSR_SE_LG)	/* Single Step */
+#define MSR_BE		__MASK(MSR_BE_LG)	/* Branch Trace */
+#define MSR_DE		__MASK(MSR_DE_LG)	/* Debug Exception Enable */
+#define MSR_FE1		__MASK(MSR_FE1_LG)	/* Floating Exception mode 1 */
+#define MSR_IP		__MASK(MSR_IP_LG)	/* Exception prefix 0x000/0xFFF */
+#define MSR_IR		__MASK(MSR_IR_LG)	/* Instruction Relocate */
+#define MSR_DR		__MASK(MSR_DR_LG)	/* Data Relocate */
+#define MSR_PE		__MASK(MSR_PE_LG)	/* Protection Enable */
+#define MSR_PX		__MASK(MSR_PX_LG)	/* Protection Exclusive Mode */
+#ifndef MSR_PMM
+#define MSR_PMM		__MASK(MSR_PMM_LG)	/* Performance monitor */
+#endif
+#define MSR_RI		__MASK(MSR_RI_LG)	/* Recoverable Exception */
+#define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
+
+#ifdef CONFIG_PPC64
+#define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
+#define MSR_KERNEL      MSR_ | MSR_SF
+
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
+#define MSR_USER64	MSR_USER32 | MSR_SF
+
+#else /* 32-bit */
+/* Default MSR for kernel mode. */
+#ifndef MSR_KERNEL	/* reg_booke.h also defines this */
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
+#endif
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+#define FPSCR_FX	0x80000000	/* FPU exception summary */
+#define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
+#define FPSCR_VX	0x20000000	/* Invalid operation summary */
+#define FPSCR_OX	0x10000000	/* Overflow exception summary */
+#define FPSCR_UX	0x08000000	/* Underflow exception summary */
+#define FPSCR_ZX	0x04000000	/* Zero-divide exception summary */
+#define FPSCR_XX	0x02000000	/* Inexact exception summary */
+#define FPSCR_VXSNAN	0x01000000	/* Invalid op for SNaN */
+#define FPSCR_VXISI	0x00800000	/* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI	0x00400000	/* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ	0x00200000	/* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ	0x00100000	/* Invalid op for Inv * Zero */
+#define FPSCR_VXVC	0x00080000	/* Invalid op for Compare */
+#define FPSCR_FR	0x00040000	/* Fraction rounded */
+#define FPSCR_FI	0x00020000	/* Fraction inexact */
+#define FPSCR_FPRF	0x0001f000	/* FPU Result Flags */
+#define FPSCR_FPCC	0x0000f000	/* FPU Condition Codes */
+#define FPSCR_VXSOFT	0x00000400	/* Invalid op for software request */
+#define FPSCR_VXSQRT	0x00000200	/* Invalid op for square root */
+#define FPSCR_VXCVI	0x00000100	/* Invalid op for integer convert */
+#define FPSCR_VE	0x00000080	/* Invalid op exception enable */
+#define FPSCR_OE	0x00000040	/* IEEE overflow exception enable */
+#define FPSCR_UE	0x00000020	/* IEEE underflow exception enable */
+#define FPSCR_ZE	0x00000010	/* IEEE zero divide exception enable */
+#define FPSCR_XE	0x00000008	/* FP inexact exception enable */
+#define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
+#define FPSCR_RN	0x00000003	/* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_CTR	0x009	/* Count Register */
+#define SPRN_DSCR	0x11
+#define SPRN_CTRLF	0x088
+#define SPRN_CTRLT	0x098
+#define   CTRL_CT	0xc0000000	/* current thread */
+#define   CTRL_CT0	0x80000000	/* thread 0 */
+#define   CTRL_CT1	0x40000000	/* thread 1 */
+#define   CTRL_TE	0x00c00000	/* thread enable */
+#define   CTRL_RUNLATCH	0x1
+#define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
+#define   DABR_TRANSLATION	(1UL << 2)
+#define SPRN_DABR2	0x13D	/* e300 */
+#define SPRN_DABRX	0x3F7	/* Data Address Breakpoint Register Extension */
+#define   DABRX_USER	(1UL << 0)
+#define   DABRX_KERNEL	(1UL << 1)
+#define SPRN_DAR	0x013	/* Data Address Register */
+#define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
+#define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
+#define   DSISR_NOHPTE		0x40000000	/* no translation found */
+#define   DSISR_PROTFAULT	0x08000000	/* protection fault */
+#define   DSISR_ISSTORE		0x02000000	/* access was a store */
+#define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
+#define   DSISR_NOSEGMENT	0x00200000	/* STAB/SLB miss */
+#define SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
+#define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
+#define SPRN_TBWL	0x11C	/* Time Base Lower Register (super, R/W) */
+#define SPRN_TBWU	0x11D	/* Time Base Upper Register (super, R/W) */
+#define SPRN_SPURR	0x134	/* Scaled PURR */
+#define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
+#define SPRN_LPCR	0x13E	/* LPAR Control Register */
+#define SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L	0x21B	/* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U	0x21A	/* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L	0x21D	/* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U	0x21C	/* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L	0x21F	/* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U	0x21E	/* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L	0x239	/* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U	0x238	/* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L	0x23B	/* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U	0x23A	/* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L	0x23D	/* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U	0x23C	/* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L	0x23F	/* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U	0x23E	/* Data BAT 7 Upper Register */
+
+#define SPRN_DEC	0x016		/* Decrement Register */
+#define SPRN_DER	0x095		/* Debug Enable Regsiter */
+#define DER_RSTE	0x40000000	/* Reset Interrupt */
+#define DER_CHSTPE	0x20000000	/* Check Stop */
+#define DER_MCIE	0x10000000	/* Machine Check Interrupt */
+#define DER_EXTIE	0x02000000	/* External Interrupt */
+#define DER_ALIE	0x01000000	/* Alignment Interrupt */
+#define DER_PRIE	0x00800000	/* Program Interrupt */
+#define DER_FPUVIE	0x00400000	/* FP Unavailable Interrupt */
+#define DER_DECIE	0x00200000	/* Decrementer Interrupt */
+#define DER_SYSIE	0x00040000	/* System Call Interrupt */
+#define DER_TRE		0x00020000	/* Trace Interrupt */
+#define DER_SEIE	0x00004000	/* FP SW Emulation Interrupt */
+#define DER_ITLBMSE	0x00002000	/* Imp. Spec. Instruction TLB Miss */
+#define DER_ITLBERE	0x00001000	/* Imp. Spec. Instruction TLB Error */
+#define DER_DTLBMSE	0x00000800	/* Imp. Spec. Data TLB Miss */
+#define DER_DTLBERE	0x00000400	/* Imp. Spec. Data TLB Error */
+#define DER_LBRKE	0x00000008	/* Load/Store Breakpoint Interrupt */
+#define DER_IBRKE	0x00000004	/* Instruction Breakpoint Interrupt */
+#define DER_EBRKE	0x00000002	/* External Breakpoint Interrupt */
+#define DER_DPIE	0x00000001	/* Dev. Port Nonmaskable Request */
+#define SPRN_DMISS	0x3D0		/* Data TLB Miss Register */
+#define SPRN_EAR	0x11A		/* External Address Register */
+#define SPRN_HASH1	0x3D2		/* Primary Hash Address Register */
+#define SPRN_HASH2	0x3D3		/* Secondary Hash Address Resgister */
+#define SPRN_HID0	0x3F0		/* Hardware Implementation Register 0 */
+#define HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
+#define HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
+#define HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
+#define HID0_SBCLK	(1<<27)
+#define HID0_EICE	(1<<26)
+#define HID0_TBEN	(1<<26)		/* Timebase enable - 745x */
+#define HID0_ECLK	(1<<25)
+#define HID0_PAR	(1<<24)
+#define HID0_STEN	(1<<24)		/* Software table search enable - 745x */
+#define HID0_HIGH_BAT	(1<<23)		/* Enable high BATs - 7455 */
+#define HID0_DOZE	(1<<23)
+#define HID0_NAP	(1<<22)
+#define HID0_SLEEP	(1<<21)
+#define HID0_DPM	(1<<20)
+#define HID0_BHTCLR	(1<<18)		/* Clear branch history table - 7450 */
+#define HID0_XAEN	(1<<17)		/* Extended addressing enable - 7450 */
+#define HID0_NHR	(1<<16)		/* Not hard reset (software bit-7450)*/
+#define HID0_ICE	(1<<15)		/* Instruction Cache Enable */
+#define HID0_DCE	(1<<14)		/* Data Cache Enable */
+#define HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
+#define HID0_DLOCK	(1<<12)		/* Data Cache Lock */
+#define HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
+#define HID0_DCI	(1<<10)		/* Data Cache Invalidate */
+#define HID0_SPD	(1<<9)		/* Speculative disable */
+#define HID0_DAPUEN	(1<<8)		/* Debug APU enable */
+#define HID0_SGE	(1<<7)		/* Store Gathering Enable */
+#define HID0_SIED	(1<<7)		/* Serial Instr. Execution [Disable] */
+#define HID0_DCFA	(1<<6)		/* Data Cache Flush Assist */
+#define HID0_LRSTK	(1<<4)		/* Link register stack - 745x */
+#define HID0_BTIC	(1<<5)		/* Branch Target Instr Cache Enable */
+#define HID0_ABE	(1<<3)		/* Address Broadcast Enable */
+#define HID0_FOLD	(1<<3)		/* Branch Folding enable - 745x */
+#define HID0_BHTE	(1<<2)		/* Branch History Table Enable */
+#define HID0_BTCD	(1<<1)		/* Branch target cache disable */
+#define HID0_NOPDST	(1<<1)		/* No-op dst, dstt, etc. instr. */
+#define HID0_NOPTI	(1<<0)		/* No-op dcbt and dcbst instr. */
+
+#define SPRN_HID1	0x3F1		/* Hardware Implementation Register 1 */
+#define HID1_EMCP	(1<<31)		/* 7450 Machine Check Pin Enable */
+#define HID1_DFS	(1<<22)		/* 7447A Dynamic Frequency Scaling */
+#define HID1_PC0	(1<<16)		/* 7450 PLL_CFG[0] */
+#define HID1_PC1	(1<<15)		/* 7450 PLL_CFG[1] */
+#define HID1_PC2	(1<<14)		/* 7450 PLL_CFG[2] */
+#define HID1_PC3	(1<<13)		/* 7450 PLL_CFG[3] */
+#define HID1_SYNCBE	(1<<11)		/* 7450 ABE for sync, eieio */
+#define HID1_ABE	(1<<10)		/* 7450 Address Broadcast Enable */
+#define HID1_PS		(1<<16)		/* 750FX PLL selection */
+#define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
+#define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
+#define SPRN_IABR2	0x3FA		/* 83xx */
+#define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
+#define SPRN_HID4	0x3F4		/* 970 HID4 */
+#define SPRN_HID5	0x3F6		/* 970 HID5 */
+#define SPRN_HID6	0x3F9	/* BE HID 6 */
+#define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
+#define   HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
+#define SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
+#define   TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
+#define   TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
+#define   TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
+#define   TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
+#define SPRN_TSC 	0x3FD	/* Thread switch control on others */
+#define SPRN_TST 	0x3FC	/* Thread switch timeout on others */
+#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
+#define SPRN_IAC1	0x3F4		/* Instruction Address Compare 1 */
+#define SPRN_IAC2	0x3F5		/* Instruction Address Compare 2 */
+#endif
+#define SPRN_IBAT0L	0x211		/* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U	0x210		/* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L	0x213		/* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U	0x212		/* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L	0x215		/* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U	0x214		/* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L	0x217		/* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U	0x216		/* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L	0x231		/* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U	0x230		/* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L	0x233		/* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U	0x232		/* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L	0x235		/* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U	0x234		/* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L	0x237		/* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U	0x236		/* Instruction BAT 7 Upper Register */
+#define SPRN_ICMP	0x3D5		/* Instruction TLB Compare Register */
+#define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
+#define SPRN_ICTRL	0x3F3	/* 1011 7450 icache and interrupt ctrl */
+#define ICTRL_EICE	0x08000000	/* enable icache parity errs */
+#define ICTRL_EDC	0x04000000	/* enable dcache parity errs */
+#define ICTRL_EICP	0x00000100	/* enable icache par. check */
+#define SPRN_IMISS	0x3D4		/* Instruction TLB Miss Register */
+#define SPRN_IMMR	0x27E		/* Internal Memory Map Register */
+#define SPRN_L2CR	0x3F9		/* Level 2 Cache Control Regsiter */
+#define SPRN_L2CR2	0x3f8
+#define L2CR_L2E		0x80000000	/* L2 enable */
+#define L2CR_L2PE		0x40000000	/* L2 parity enable */
+#define L2CR_L2SIZ_MASK		0x30000000	/* L2 size mask */
+#define L2CR_L2SIZ_256KB	0x10000000	/* L2 size 256KB */
+#define L2CR_L2SIZ_512KB	0x20000000	/* L2 size 512KB */
+#define L2CR_L2SIZ_1MB		0x30000000	/* L2 size 1MB */
+#define L2CR_L2CLK_MASK		0x0e000000	/* L2 clock mask */
+#define L2CR_L2CLK_DISABLED	0x00000000	/* L2 clock disabled */
+#define L2CR_L2CLK_DIV1		0x02000000	/* L2 clock / 1 */
+#define L2CR_L2CLK_DIV1_5	0x04000000	/* L2 clock / 1.5 */
+#define L2CR_L2CLK_DIV2		0x08000000	/* L2 clock / 2 */
+#define L2CR_L2CLK_DIV2_5	0x0a000000	/* L2 clock / 2.5 */
+#define L2CR_L2CLK_DIV3		0x0c000000	/* L2 clock / 3 */
+#define L2CR_L2RAM_MASK		0x01800000	/* L2 RAM type mask */
+#define L2CR_L2RAM_FLOW		0x00000000	/* L2 RAM flow through */
+#define L2CR_L2RAM_PIPE		0x01000000	/* L2 RAM pipelined */
+#define L2CR_L2RAM_PIPE_LW	0x01800000	/* L2 RAM pipelined latewr */
+#define L2CR_L2DO		0x00400000	/* L2 data only */
+#define L2CR_L2I		0x00200000	/* L2 global invalidate */
+#define L2CR_L2CTL		0x00100000	/* L2 RAM control */
+#define L2CR_L2WT		0x00080000	/* L2 write-through */
+#define L2CR_L2TS		0x00040000	/* L2 test support */
+#define L2CR_L2OH_MASK		0x00030000	/* L2 output hold mask */
+#define L2CR_L2OH_0_5		0x00000000	/* L2 output hold 0.5 ns */
+#define L2CR_L2OH_1_0		0x00010000	/* L2 output hold 1.0 ns */
+#define L2CR_L2SL		0x00008000	/* L2 DLL slow */
+#define L2CR_L2DF		0x00004000	/* L2 differential clock */
+#define L2CR_L2BYP		0x00002000	/* L2 DLL bypass */
+#define L2CR_L2IP		0x00000001	/* L2 GI in progress */
+#define L2CR_L2IO_745x		0x00100000	/* L2 instr. only (745x) */
+#define L2CR_L2DO_745x		0x00010000	/* L2 data only (745x) */
+#define L2CR_L2REP_745x		0x00001000	/* L2 repl. algorithm (745x) */
+#define L2CR_L2HWF_745x		0x00000800	/* L2 hardware flush (745x) */
+#define SPRN_L3CR		0x3FA	/* Level 3 Cache Control Regsiter */
+#define L3CR_L3E		0x80000000	/* L3 enable */
+#define L3CR_L3PE		0x40000000	/* L3 data parity enable */
+#define L3CR_L3APE		0x20000000	/* L3 addr parity enable */
+#define L3CR_L3SIZ		0x10000000	/* L3 size */
+#define L3CR_L3CLKEN		0x08000000	/* L3 clock enable */
+#define L3CR_L3RES		0x04000000	/* L3 special reserved bit */
+#define L3CR_L3CLKDIV		0x03800000	/* L3 clock divisor */
+#define L3CR_L3IO		0x00400000	/* L3 instruction only */
+#define L3CR_L3SPO		0x00040000	/* L3 sample point override */
+#define L3CR_L3CKSP		0x00030000	/* L3 clock sample point */
+#define L3CR_L3PSP		0x0000e000	/* L3 P-clock sample point */
+#define L3CR_L3REP		0x00001000	/* L3 replacement algorithm */
+#define L3CR_L3HWF		0x00000800	/* L3 hardware flush */
+#define L3CR_L3I		0x00000400	/* L3 global invalidate */
+#define L3CR_L3RT		0x00000300	/* L3 SRAM type */
+#define L3CR_L3NIRCA		0x00000080	/* L3 non-integer ratio clock adj. */
+#define L3CR_L3DO		0x00000040	/* L3 data only mode */
+#define L3CR_PMEN		0x00000004	/* L3 private memory enable */
+#define L3CR_PMSIZ		0x00000001	/* L3 private memory size */
+
+#define SPRN_MSSCR0	0x3f6	/* Memory Subsystem Control Register 0 */
+#define SPRN_MSSSR0	0x3f7	/* Memory Subsystem Status Register 1 */
+#define SPRN_LDSTCR	0x3f8	/* Load/Store control register */
+#define SPRN_LDSTDB	0x3f4	/* */
+#define SPRN_LR		0x008	/* Link Register */
+#ifndef SPRN_PIR
+#define SPRN_PIR	0x3FF	/* Processor Identification Register */
+#endif
+#define SPRN_PTEHI	0x3D5	/* 981 7450 PTE HI word (S/W TLB load) */
+#define SPRN_PTELO	0x3D6	/* 982 7450 PTE LO word (S/W TLB load) */
+#define SPRN_PURR	0x135	/* Processor Utilization of Resources Reg */
+#define SPRN_PVR	0x11F	/* Processor Version Register */
+#define SPRN_RPA	0x3D6	/* Required Physical Address Register */
+#define SPRN_SDA	0x3BF	/* Sampled Data Address Register */
+#define SPRN_SDR1	0x019	/* MMU Hash Base Register */
+#define SPRN_ASR	0x118   /* Address Space Register */
+#define SPRN_SIA	0x3BB	/* Sampled Instruction Address Register */
+#define SPRN_SPRG0	0x110	/* Special Purpose Register General 0 */
+#define SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
+#define SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
+#define SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
+#define SPRN_SPRG4	0x114	/* Special Purpose Register General 4 */
+#define SPRN_SPRG5	0x115	/* Special Purpose Register General 5 */
+#define SPRN_SPRG6	0x116	/* Special Purpose Register General 6 */
+#define SPRN_SPRG7	0x117	/* Special Purpose Register General 7 */
+#define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
+#define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
+#define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
+#define   SRR1_WAKERESET	0x00380000 /* System reset */
+#define   SRR1_WAKESYSERR	0x00300000 /* System error */
+#define   SRR1_WAKEEE		0x00200000 /* External interrupt */
+#define   SRR1_WAKEMT		0x00280000 /* mtctrl */
+#define   SRR1_WAKEDEC		0x00180000 /* Decrementer interrupt */
+#define   SRR1_WAKETHERM	0x00100000 /* Thermal management interrupt */
+#define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
+#define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
+
+#define SPRN_TBCTL	0x35f	/* PA6T Timebase control register */
+#define   TBCTL_FREEZE		0x0000000000000000ull /* Freeze all tbs */
+#define   TBCTL_RESTART		0x0000000100000000ull /* Restart all tbs */
+#define   TBCTL_UPDATE_UPPER	0x0000000200000000ull /* Set upper 32 bits */
+#define   TBCTL_UPDATE_LOWER	0x0000000300000000ull /* Set lower 32 bits */
+
+#ifndef SPRN_SVR
+#define SPRN_SVR	0x11E	/* System Version Register */
+#endif
+#define SPRN_THRM1	0x3FC		/* Thermal Management Register 1 */
+/* these bits were defined in inverted endian sense originally, ugh, confusing */
+#define THRM1_TIN	(1 << 31)
+#define THRM1_TIV	(1 << 30)
+#define THRM1_THRES(x)	((x&0x7f)<<23)
+#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM1_TID	(1<<2)
+#define THRM1_TIE	(1<<1)
+#define THRM1_V		(1<<0)
+#define SPRN_THRM2	0x3FD		/* Thermal Management Register 2 */
+#define SPRN_THRM3	0x3FE		/* Thermal Management Register 3 */
+#define THRM3_E		(1<<0)
+#define SPRN_TLBMISS	0x3D4		/* 980 7450 TLB Miss Register */
+#define SPRN_UMMCR0	0x3A8	/* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1	0x3AC	/* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1	0x3A9	/* User Performance Counter Register 1 */
+#define SPRN_UPMC2	0x3AA	/* User Performance Counter Register 2 */
+#define SPRN_UPMC3	0x3AD	/* User Performance Counter Register 3 */
+#define SPRN_UPMC4	0x3AE	/* User Performance Counter Register 4 */
+#define SPRN_USIA	0x3AB	/* User Sampled Instruction Address Register */
+#define SPRN_VRSAVE	0x100	/* Vector Register Save Register */
+#define SPRN_XER	0x001	/* Fixed Point Exception Register */
+
+#define SPRN_SCOMC	0x114	/* SCOM Access Control */
+#define SPRN_SCOMD	0x115	/* SCOM Access DATA */
+
+/* Performance monitor SPRs */
+#ifdef CONFIG_PPC64
+#define SPRN_MMCR0	795
+#define   MMCR0_FC	0x80000000UL /* freeze counters */
+#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
+#define   MMCR0_KERNEL_DISABLE MMCR0_FCS
+#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
+#define   MMCR0_PROBLEM_DISABLE MMCR0_FCP
+#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
+#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
+#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
+#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
+#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
+#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
+#define   MMCR0_PMCjCE	0x00004000UL /* PMCj count enable*/
+#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
+#define   MMCR0_PMAO	0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
+#define   MMCR0_SHRFC	0x00000040UL /* SHRre freeze conditions between threads */
+#define   MMCR0_FCTI	0x00000008UL /* freeze counters in tags inactive mode */
+#define   MMCR0_FCTA	0x00000004UL /* freeze counters in tags active mode */
+#define   MMCR0_FCWAIT	0x00000002UL /* freeze counter in WAIT state */
+#define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
+#define SPRN_MMCR1	798
+#define SPRN_MMCRA	0x312
+#define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
+#define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
+#define   MMCRA_SLOT	0x07000000UL /* SLOT bits (37-39) */
+#define   MMCRA_SLOT_SHIFT	24
+#define   MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
+#define   POWER6_MMCRA_SIHV   0x0000040000000000ULL
+#define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
+#define   POWER6_MMCRA_THRM	0x00000020UL
+#define   POWER6_MMCRA_OTHER	0x0000000EUL
+#define SPRN_PMC1	787
+#define SPRN_PMC2	788
+#define SPRN_PMC3	789
+#define SPRN_PMC4	790
+#define SPRN_PMC5	791
+#define SPRN_PMC6	792
+#define SPRN_PMC7	793
+#define SPRN_PMC8	794
+#define SPRN_SIAR	780
+#define SPRN_SDAR	781
+
+#define SPRN_PA6T_MMCR0 795
+#define   PA6T_MMCR0_EN0	0x0000000000000001UL
+#define   PA6T_MMCR0_EN1	0x0000000000000002UL
+#define   PA6T_MMCR0_EN2	0x0000000000000004UL
+#define   PA6T_MMCR0_EN3	0x0000000000000008UL
+#define   PA6T_MMCR0_EN4	0x0000000000000010UL
+#define   PA6T_MMCR0_EN5	0x0000000000000020UL
+#define   PA6T_MMCR0_SUPEN	0x0000000000000040UL
+#define   PA6T_MMCR0_PREN	0x0000000000000080UL
+#define   PA6T_MMCR0_HYPEN	0x0000000000000100UL
+#define   PA6T_MMCR0_FCM0	0x0000000000000200UL
+#define   PA6T_MMCR0_FCM1	0x0000000000000400UL
+#define   PA6T_MMCR0_INTGEN	0x0000000000000800UL
+#define   PA6T_MMCR0_INTEN0	0x0000000000001000UL
+#define   PA6T_MMCR0_INTEN1	0x0000000000002000UL
+#define   PA6T_MMCR0_INTEN2	0x0000000000004000UL
+#define   PA6T_MMCR0_INTEN3	0x0000000000008000UL
+#define   PA6T_MMCR0_INTEN4	0x0000000000010000UL
+#define   PA6T_MMCR0_INTEN5	0x0000000000020000UL
+#define   PA6T_MMCR0_DISCNT	0x0000000000040000UL
+#define   PA6T_MMCR0_UOP	0x0000000000080000UL
+#define   PA6T_MMCR0_TRG	0x0000000000100000UL
+#define   PA6T_MMCR0_TRGEN	0x0000000000200000UL
+#define   PA6T_MMCR0_TRGREG	0x0000000001600000UL
+#define   PA6T_MMCR0_SIARLOG	0x0000000002000000UL
+#define   PA6T_MMCR0_SDARLOG	0x0000000004000000UL
+#define   PA6T_MMCR0_PROEN	0x0000000008000000UL
+#define   PA6T_MMCR0_PROLOG	0x0000000010000000UL
+#define   PA6T_MMCR0_DAMEN2	0x0000000020000000UL
+#define   PA6T_MMCR0_DAMEN3	0x0000000040000000UL
+#define   PA6T_MMCR0_DAMEN4	0x0000000080000000UL
+#define   PA6T_MMCR0_DAMEN5	0x0000000100000000UL
+#define   PA6T_MMCR0_DAMSEL2	0x0000000200000000UL
+#define   PA6T_MMCR0_DAMSEL3	0x0000000400000000UL
+#define   PA6T_MMCR0_DAMSEL4	0x0000000800000000UL
+#define   PA6T_MMCR0_DAMSEL5	0x0000001000000000UL
+#define   PA6T_MMCR0_HANDDIS	0x0000002000000000UL
+#define   PA6T_MMCR0_PCTEN	0x0000004000000000UL
+#define   PA6T_MMCR0_SOCEN	0x0000008000000000UL
+#define   PA6T_MMCR0_SOCMOD	0x0000010000000000UL
+
+#define SPRN_PA6T_MMCR1 798
+#define   PA6T_MMCR1_ES2	0x00000000000000ffUL
+#define   PA6T_MMCR1_ES3	0x000000000000ff00UL
+#define   PA6T_MMCR1_ES4	0x0000000000ff0000UL
+#define   PA6T_MMCR1_ES5	0x00000000ff000000UL
+
+#define SPRN_PA6T_UPMC0 771	/* User PerfMon Counter 0 */
+#define SPRN_PA6T_UPMC1 772	/* ... */
+#define SPRN_PA6T_UPMC2 773
+#define SPRN_PA6T_UPMC3 774
+#define SPRN_PA6T_UPMC4 775
+#define SPRN_PA6T_UPMC5 776
+#define SPRN_PA6T_UMMCR0 779	/* User Monitor Mode Control Register 0 */
+#define SPRN_PA6T_SIAR	780	/* Sampled Instruction Address */
+#define SPRN_PA6T_UMMCR1 782	/* User Monitor Mode Control Register 1 */
+#define SPRN_PA6T_SIER	785	/* Sampled Instruction Event Register */
+#define SPRN_PA6T_PMC0	787
+#define SPRN_PA6T_PMC1	788
+#define SPRN_PA6T_PMC2	789
+#define SPRN_PA6T_PMC3	790
+#define SPRN_PA6T_PMC4	791
+#define SPRN_PA6T_PMC5	792
+#define SPRN_PA6T_TSR0	793	/* Timestamp Register 0 */
+#define SPRN_PA6T_TSR1	794	/* Timestamp Register 1 */
+#define SPRN_PA6T_TSR2	799	/* Timestamp Register 2 */
+#define SPRN_PA6T_TSR3	784	/* Timestamp Register 3 */
+
+#define SPRN_PA6T_IER	981	/* Icache Error Register */
+#define SPRN_PA6T_DER	982	/* Dcache Error Register */
+#define SPRN_PA6T_BER	862	/* BIU Error Address Register */
+#define SPRN_PA6T_MER	849	/* MMU Error Register */
+
+#define SPRN_PA6T_IMA0	880	/* Instruction Match Array 0 */
+#define SPRN_PA6T_IMA1	881	/* ... */
+#define SPRN_PA6T_IMA2	882
+#define SPRN_PA6T_IMA3	883
+#define SPRN_PA6T_IMA4	884
+#define SPRN_PA6T_IMA5	885
+#define SPRN_PA6T_IMA6	886
+#define SPRN_PA6T_IMA7	887
+#define SPRN_PA6T_IMA8	888
+#define SPRN_PA6T_IMA9	889
+#define SPRN_PA6T_BTCR	978	/* Breakpoint and Tagging Control Register */
+#define SPRN_PA6T_IMAAT	979	/* Instruction Match Array Action Table */
+#define SPRN_PA6T_PCCR	1019	/* Power Counter Control Register */
+#define SPRN_BKMK	1020	/* Cell Bookmark Register */
+#define SPRN_PA6T_RPCCR	1021	/* Retire PC Trace Control Register */
+
+
+#else /* 32-bit */
+#define SPRN_MMCR0	952	/* Monitor Mode Control Register 0 */
+#define   MMCR0_FC	0x80000000UL /* freeze counters */
+#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
+#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
+#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
+#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
+#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
+#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
+#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
+#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
+#define   MMCR0_PMCnCE	0x00004000UL /* count enable for all but PMC 1*/
+#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
+#define   MMCR0_PMC1SEL	0x00001fc0UL /* PMC 1 Event */
+#define   MMCR0_PMC2SEL	0x0000003fUL /* PMC 2 Event */
+
+#define SPRN_MMCR1	956
+#define   MMCR1_PMC3SEL	0xf8000000UL /* PMC 3 Event */
+#define   MMCR1_PMC4SEL	0x07c00000UL /* PMC 4 Event */
+#define   MMCR1_PMC5SEL	0x003e0000UL /* PMC 5 Event */
+#define   MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
+#define SPRN_MMCR2	944
+#define SPRN_PMC1	953	/* Performance Counter Register 1 */
+#define SPRN_PMC2	954	/* Performance Counter Register 2 */
+#define SPRN_PMC3	957	/* Performance Counter Register 3 */
+#define SPRN_PMC4	958	/* Performance Counter Register 4 */
+#define SPRN_PMC5	945	/* Performance Counter Register 5 */
+#define SPRN_PMC6	946	/* Performance Counter Register 6 */
+
+#define SPRN_SIAR	955	/* Sampled Instruction Address Register */
+
+/* Bit definitions for MMCR0 and PMC1 / PMC2. */
+#define MMCR0_PMC1_CYCLES	(1 << 7)
+#define MMCR0_PMC1_ICACHEMISS	(5 << 7)
+#define MMCR0_PMC1_DTLB		(6 << 7)
+#define MMCR0_PMC2_DCACHEMISS	0x6
+#define MMCR0_PMC2_CYCLES	0x1
+#define MMCR0_PMC2_ITLB		0x7
+#define MMCR0_PMC2_LOADMISSTIME	0x5
+#endif
+
+/*
+ * An mtfsf instruction with the L bit set. On CPUs that support this a
+ * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
+ *
+ * Until binutils gets the new form of mtfsf, hardwire the instruction.
+ */
+#ifdef CONFIG_PPC64
+#define MTFSF_L(REG) \
+	.long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25))
+#else
+#define MTFSF_L(REG)	mtfsf	0xff, (REG)
+#endif
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr)	(((pvr) >>  16) & 0xFFFF)	/* Version field */
+#define PVR_REV(pvr)	(((pvr) >>   0) & 0xFFFF)	/* Revison field */
+
+#define __is_processor(pv)	(PVR_VER(mfspr(SPRN_PVR)) == (pv))
+
+/*
+ * IBM has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr)	(((pvr) >> 20) & 0xFFF)	/* Family field */
+#define PVR_MEM(pvr)	(((pvr) >> 16) & 0xF)	/* Member field */
+#define PVR_CORE(pvr)	(((pvr) >> 12) & 0xF)	/* Core field */
+#define PVR_CFG(pvr)	(((pvr) >>  8) & 0xF)	/* Configuration field */
+#define PVR_MAJ(pvr)	(((pvr) >>  4) & 0xF)	/* Major revision field */
+#define PVR_MIN(pvr)	(((pvr) >>  0) & 0xF)	/* Minor revision field */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA	0x00200000
+#define PVR_403GB	0x00200100
+#define PVR_403GC	0x00200200
+#define PVR_403GCX	0x00201400
+#define PVR_405GP	0x40110000
+#define PVR_STB03XXX	0x40310000
+#define PVR_NP405H	0x41410000
+#define PVR_NP405L	0x41610000
+#define PVR_601		0x00010000
+#define PVR_602		0x00050000
+#define PVR_603		0x00030000
+#define PVR_603e	0x00060000
+#define PVR_603ev	0x00070000
+#define PVR_603r	0x00071000
+#define PVR_604		0x00040000
+#define PVR_604e	0x00090000
+#define PVR_604r	0x000A0000
+#define PVR_620		0x00140000
+#define PVR_740		0x00080000
+#define PVR_750		PVR_740
+#define PVR_740P	0x10080000
+#define PVR_750P	PVR_740P
+#define PVR_7400	0x000C0000
+#define PVR_7410	0x800C0000
+#define PVR_7450	0x80000000
+#define PVR_8540	0x80200000
+#define PVR_8560	0x80200000
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_821		0x00500000
+#define PVR_823		PVR_821
+#define PVR_850		PVR_821
+#define PVR_860		PVR_821
+#define PVR_8240	0x00810100
+#define PVR_8245	0x80811014
+#define PVR_8260	PVR_8240
+
+/* 64-bit processors */
+/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
+#define PV_NORTHSTAR	0x0033
+#define PV_PULSAR	0x0034
+#define PV_POWER4	0x0035
+#define PV_ICESTAR	0x0036
+#define PV_SSTAR	0x0037
+#define PV_POWER4p	0x0038
+#define PV_970		0x0039
+#define PV_POWER5	0x003A
+#define PV_POWER5p	0x003B
+#define PV_970FX	0x003C
+#define PV_630		0x0040
+#define PV_630p	0x0041
+#define PV_970MP	0x0044
+#define PV_970GX	0x0045
+#define PV_BE		0x0070
+#define PV_PA6T		0x0090
+
+/* Macros for setting and retrieving special purpose registers */
+#ifndef __ASSEMBLY__
+#define mfmsr()		({unsigned long rval; \
+			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+#ifdef CONFIG_PPC64
+#define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
+				     : : "r" (v))
+#define mtmsrd(v)	__mtmsrd((v), 0)
+#define mtmsr(v)	mtmsrd(v)
+#else
+#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v))
+#endif
+
+#define mfspr(rn)	({unsigned long rval; \
+			asm volatile("mfspr %0," __stringify(rn) \
+				: "=r" (rval)); rval;})
+#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
+#ifdef __powerpc64__
+#ifdef CONFIG_PPC_CELL
+#define mftb()		({unsigned long rval;				\
+			asm volatile(					\
+				"90:	mftb %0;\n"			\
+				"97:	cmpwi %0,0;\n"			\
+				"	beq- 90b;\n"			\
+				"99:\n"					\
+				".section __ftr_fixup,\"a\"\n"		\
+				".align 3\n"				\
+				"98:\n"					\
+				"	.llong %1\n"			\
+				"	.llong %1\n"			\
+				"	.llong 97b-98b\n"		\
+				"	.llong 99b-98b\n"		\
+				"	.llong 0\n"			\
+				"	.llong 0\n"			\
+				".previous"				\
+			: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
+#else
+#define mftb()		({unsigned long rval;	\
+			asm volatile("mftb %0" : "=r" (rval)); rval;})
+#endif /* !CONFIG_PPC_CELL */
+
+#else /* __powerpc64__ */
+
+#define mftbl()		({unsigned long rval;	\
+			asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu()		({unsigned long rval;	\
+			asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#endif /* !__powerpc64__ */
+
+#define mttbl(v)	asm volatile("mttbl %0":: "r"(v))
+#define mttbu(v)	asm volatile("mttbu %0":: "r"(v))
+
+#ifdef CONFIG_PPC32
+#define mfsrin(v)	({unsigned int rval; \
+			asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
+					rval;})
+#endif
+
+#define proc_trap()	asm volatile("trap")
+
+#ifdef CONFIG_PPC64
+
+extern void ppc64_runlatch_on(void);
+extern void ppc64_runlatch_off(void);
+
+extern unsigned long scom970_read(unsigned int address);
+extern void scom970_write(unsigned int address, unsigned long value);
+
+#else
+#define ppc64_runlatch_on()
+#define ppc64_runlatch_off()
+
+#endif /* CONFIG_PPC64 */
+
+#define __get_SP()	({unsigned long sp; \
+			asm volatile("mr %0,1": "=r" (sp)); sp;})
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_REG_H */
diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
new file mode 100644
index 00000000000..e8ea346b21d
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -0,0 +1,42 @@
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs.  Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST	560	/* Instruction cache control/status */
+#define SPRN_IC_ADR	561	/* Address needed for some commands */
+#define SPRN_IC_DAT	562	/* Read-only data register */
+#define SPRN_DC_CST	568	/* Data cache control/status */
+#define SPRN_DC_ADR	569	/* Address needed for some commands */
+#define SPRN_DC_DAT	570	/* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define	IDC_ENABLE	0x02000000	/* Cache enable */
+#define IDC_DISABLE	0x04000000	/* Cache disable */
+#define IDC_LDLCK	0x06000000	/* Load and lock */
+#define IDC_UNLINE	0x08000000	/* Unlock line */
+#define IDC_UNALL	0x0a000000	/* Unlock all */
+#define IDC_INVALL	0x0c000000	/* Invalidate all */
+
+#define DC_FLINE	0x0e000000	/* Flush data cache line */
+#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
+#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
+#define DC_SLES		0x05000000	/* Set little endian swap mode */
+#define DC_CLES		0x07000000	/* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED	0x80000000	/* Cache is enabled */
+#define IDC_CERR1	0x00200000	/* Cache error 1 */
+#define IDC_CERR2	0x00100000	/* Cache error 2 */
+#define IDC_CERR3	0x00080000	/* Cache error 3 */
+
+#define DC_DFWT		0x40000000	/* Data cache is forced write through */
+#define DC_LES		0x20000000	/* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
new file mode 100644
index 00000000000..be980f4ee49
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -0,0 +1,501 @@
+/*
+ * Contains register definitions common to the Book E PowerPC
+ * specification.  Notice that while the IBM-40x series of CPUs
+ * are not true Book E PowerPCs, they borrowed a number of features
+ * before Book E was finalized, and are included here as well.  Unfortunatly,
+ * they sometimes used different locations than true Book E CPUs did.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_BOOKE_H__
+#define __ASM_POWERPC_REG_BOOKE_H__
+
+/* Machine State Register (MSR) Fields */
+#define MSR_UCLE	(1<<26)	/* User-mode cache lock enable */
+#define MSR_SPE		(1<<25)	/* Enable SPE */
+#define MSR_DWE		(1<<10)	/* Debug Wait Enable */
+#define MSR_UBLE	(1<<10)	/* BTB lock enable (e500) */
+#define MSR_IS		MSR_IR	/* Instruction Space */
+#define MSR_DS		MSR_DR	/* Data Space */
+#define MSR_PMM		(1<<2)	/* Performance monitor mark bit */
+
+/* Default MSR for kernel mode. */
+#if defined (CONFIG_40x)
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
+#elif defined(CONFIG_BOOKE)
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_CE)
+#endif
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_DECAR	0x036	/* Decrementer Auto Reload Register */
+#define SPRN_IVPR	0x03F	/* Interrupt Vector Prefix Register */
+#define SPRN_USPRG0	0x100	/* User Special Purpose Register General 0 */
+#define SPRN_SPRG4R	0x104	/* Special Purpose Register General 4 Read */
+#define SPRN_SPRG5R	0x105	/* Special Purpose Register General 5 Read */
+#define SPRN_SPRG6R	0x106	/* Special Purpose Register General 6 Read */
+#define SPRN_SPRG7R	0x107	/* Special Purpose Register General 7 Read */
+#define SPRN_SPRG4W	0x114	/* Special Purpose Register General 4 Write */
+#define SPRN_SPRG5W	0x115	/* Special Purpose Register General 5 Write */
+#define SPRN_SPRG6W	0x116	/* Special Purpose Register General 6 Write */
+#define SPRN_SPRG7W	0x117	/* Special Purpose Register General 7 Write */
+#define SPRN_DBCR2	0x136	/* Debug Control Register 2 */
+#define SPRN_IAC3	0x13A	/* Instruction Address Compare 3 */
+#define SPRN_IAC4	0x13B	/* Instruction Address Compare 4 */
+#define SPRN_DVC1	0x13E	/* Data Value Compare Register 1 */
+#define SPRN_DVC2	0x13F	/* Data Value Compare Register 2 */
+#define SPRN_IVOR0	0x190	/* Interrupt Vector Offset Register 0 */
+#define SPRN_IVOR1	0x191	/* Interrupt Vector Offset Register 1 */
+#define SPRN_IVOR2	0x192	/* Interrupt Vector Offset Register 2 */
+#define SPRN_IVOR3	0x193	/* Interrupt Vector Offset Register 3 */
+#define SPRN_IVOR4	0x194	/* Interrupt Vector Offset Register 4 */
+#define SPRN_IVOR5	0x195	/* Interrupt Vector Offset Register 5 */
+#define SPRN_IVOR6	0x196	/* Interrupt Vector Offset Register 6 */
+#define SPRN_IVOR7	0x197	/* Interrupt Vector Offset Register 7 */
+#define SPRN_IVOR8	0x198	/* Interrupt Vector Offset Register 8 */
+#define SPRN_IVOR9	0x199	/* Interrupt Vector Offset Register 9 */
+#define SPRN_IVOR10	0x19A	/* Interrupt Vector Offset Register 10 */
+#define SPRN_IVOR11	0x19B	/* Interrupt Vector Offset Register 11 */
+#define SPRN_IVOR12	0x19C	/* Interrupt Vector Offset Register 12 */
+#define SPRN_IVOR13	0x19D	/* Interrupt Vector Offset Register 13 */
+#define SPRN_IVOR14	0x19E	/* Interrupt Vector Offset Register 14 */
+#define SPRN_IVOR15	0x19F	/* Interrupt Vector Offset Register 15 */
+#define SPRN_SPEFSCR	0x200	/* SPE & Embedded FP Status & Control */
+#define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
+#define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */
+#define SPRN_L1CFG0	0x203	/* L1 Cache Configure Register 0 */
+#define SPRN_L1CFG1	0x204	/* L1 Cache Configure Register 1 */
+#define SPRN_ATB	0x20E	/* Alternate Time Base */
+#define SPRN_ATBL	0x20E	/* Alternate Time Base Lower */
+#define SPRN_ATBU	0x20F	/* Alternate Time Base Upper */
+#define SPRN_IVOR32	0x210	/* Interrupt Vector Offset Register 32 */
+#define SPRN_IVOR33	0x211	/* Interrupt Vector Offset Register 33 */
+#define SPRN_IVOR34	0x212	/* Interrupt Vector Offset Register 34 */
+#define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
+#define SPRN_IVOR36	0x214	/* Interrupt Vector Offset Register 36 */
+#define SPRN_IVOR37	0x215	/* Interrupt Vector Offset Register 37 */
+#define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
+#define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
+#define SPRN_MCSR	0x23C	/* Machine Check Status Register */
+#define SPRN_MCAR	0x23D	/* Machine Check Address Register */
+#define SPRN_DSRR0	0x23E	/* Debug Save and Restore Register 0 */
+#define SPRN_DSRR1	0x23F	/* Debug Save and Restore Register 1 */
+#define SPRN_SPRG8	0x25C	/* Special Purpose Register General 8 */
+#define SPRN_SPRG9	0x25D	/* Special Purpose Register General 9 */
+#define SPRN_L1CSR2	0x25E	/* L1 Cache Control and Status Register 2 */
+#define SPRN_MAS0	0x270	/* MMU Assist Register 0 */
+#define SPRN_MAS1	0x271	/* MMU Assist Register 1 */
+#define SPRN_MAS2	0x272	/* MMU Assist Register 2 */
+#define SPRN_MAS3	0x273	/* MMU Assist Register 3 */
+#define SPRN_MAS4	0x274	/* MMU Assist Register 4 */
+#define SPRN_MAS5	0x275	/* MMU Assist Register 5 */
+#define SPRN_MAS6	0x276	/* MMU Assist Register 6 */
+#define SPRN_PID1	0x279	/* Process ID Register 1 */
+#define SPRN_PID2	0x27A	/* Process ID Register 2 */
+#define SPRN_TLB0CFG	0x2B0	/* TLB 0 Config Register */
+#define SPRN_TLB1CFG	0x2B1	/* TLB 1 Config Register */
+#define SPRN_EPR	0x2BE	/* External Proxy Register */
+#define SPRN_CCR1	0x378	/* Core Configuration Register 1 */
+#define SPRN_ZPR	0x3B0	/* Zone Protection Register (40x) */
+#define SPRN_MAS7	0x3B0	/* MMU Assist Register 7 */
+#define SPRN_MMUCR	0x3B2	/* MMU Control Register */
+#define SPRN_CCR0	0x3B3	/* Core Configuration Register 0 */
+#define SPRN_EPLC	0x3B3	/* External Process ID Load Context */
+#define SPRN_EPSC	0x3B4	/* External Process ID Store Context */
+#define SPRN_SGR	0x3B9	/* Storage Guarded Register */
+#define SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
+#define SPRN_SLER	0x3BB	/* Little-endian real mode */
+#define SPRN_SU0R	0x3BC	/* "User 0" real mode (40x) */
+#define SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
+#define SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
+#define SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
+#define SPRN_L1CSR0	0x3F2	/* L1 Cache Control and Status Register 0 */
+#define SPRN_L1CSR1	0x3F3	/* L1 Cache Control and Status Register 1 */
+#define SPRN_PIT	0x3DB	/* Programmable Interval Timer */
+#define SPRN_BUCSR	0x3F5	/* Branch Unit Control and Status */
+#define SPRN_L2CSR0	0x3F9	/* L2 Data Cache Control and Status Register 0 */
+#define SPRN_L2CSR1	0x3FA	/* L2 Data Cache Control and Status Register 1 */
+#define SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
+#define SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
+#define SPRN_SVR	0x3FF	/* System Version Register */
+
+/*
+ * SPRs which have conflicting definitions on true Book E versus classic,
+ * or IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define SPRN_PID	0x030	/* Process ID */
+#define SPRN_PID0	SPRN_PID/* Process ID Register 0 */
+#define SPRN_CSRR0	0x03A	/* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1	0x03B	/* Critical Save and Restore Register 1 */
+#define SPRN_DEAR	0x03D	/* Data Error Address Register */
+#define SPRN_ESR	0x03E	/* Exception Syndrome Register */
+#define SPRN_PIR	0x11E	/* Processor Identification Register */
+#define SPRN_DBSR	0x130	/* Debug Status Register */
+#define SPRN_DBCR0	0x134	/* Debug Control Register 0 */
+#define SPRN_DBCR1	0x135	/* Debug Control Register 1 */
+#define SPRN_IAC1	0x138	/* Instruction Address Compare 1 */
+#define SPRN_IAC2	0x139	/* Instruction Address Compare 2 */
+#define SPRN_DAC1	0x13C	/* Data Address Compare 1 */
+#define SPRN_DAC2	0x13D	/* Data Address Compare 2 */
+#define SPRN_TSR	0x150	/* Timer Status Register */
+#define SPRN_TCR	0x154	/* Timer Control Register */
+#endif /* Book E */
+#ifdef CONFIG_40x
+#define SPRN_PID	0x3B1	/* Process ID */
+#define SPRN_DBCR1	0x3BD	/* Debug Control Register 1 */		
+#define SPRN_ESR	0x3D4	/* Exception Syndrome Register */
+#define SPRN_DEAR	0x3D5	/* Data Error Address Register */
+#define SPRN_TSR	0x3D8	/* Timer Status Register */
+#define SPRN_TCR	0x3DA	/* Timer Control Register */
+#define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
+#define SPRN_SRR3	0x3DF	/* Save/Restore Register 3 */
+#define SPRN_DBSR	0x3F0	/* Debug Status Register */		
+#define SPRN_DBCR0	0x3F2	/* Debug Control Register 0 */
+#define SPRN_DAC1	0x3F6	/* Data Address Compare 1 */
+#define SPRN_DAC2	0x3F7	/* Data Address Compare 2 */
+#define SPRN_CSRR0	SPRN_SRR2 /* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1	SPRN_SRR3 /* Critical Save and Restore Register 1 */
+#endif
+
+/* Bit definitions for CCR1. */
+#define	CCR1_DPC	0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
+#define	CCR1_TCS	0x00000080 /* Timer Clock Select */
+
+/* Bit definitions for the MCSR. */
+#define MCSR_MCS	0x80000000 /* Machine Check Summary */
+#define MCSR_IB		0x40000000 /* Instruction PLB Error */
+#define MCSR_DRB	0x20000000 /* Data Read PLB Error */
+#define MCSR_DWB	0x10000000 /* Data Write PLB Error */
+#define MCSR_TLBP	0x08000000 /* TLB Parity Error */
+#define MCSR_ICP	0x04000000 /* I-Cache Parity Error */
+#define MCSR_DCSP	0x02000000 /* D-Cache Search Parity Error */
+#define MCSR_DCFP	0x01000000 /* D-Cache Flush Parity Error */
+#define MCSR_IMPE	0x00800000 /* Imprecise Machine Check Exception */
+
+#ifdef CONFIG_E500
+#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
+#define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
+#define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
+#define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
+#define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
+#define MCSR_BUS_RAERR 	0x00000040UL /* Read Address Error */
+#define MCSR_BUS_WAERR 	0x00000020UL /* Write Address Error */
+#define MCSR_BUS_IBERR 	0x00000010UL /* Instruction Data Error */
+#define MCSR_BUS_RBERR 	0x00000008UL /* Read Data Bus Error */
+#define MCSR_BUS_WBERR 	0x00000004UL /* Write Data Bus Error */
+#define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
+#define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
+
+/* e500 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
+			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
+			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
+			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+#endif
+#ifdef CONFIG_E200
+#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
+#define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
+#define MCSR_CPERR 	0x10000000UL /* Cache Parity Error */
+#define MCSR_EXCP_ERR 	0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn
+					fetch for an exception handler */
+#define MCSR_BUS_IRERR 	0x00000010UL /* Read Bus Error on instruction fetch*/
+#define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
+#define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
+					store or cache line push */
+
+/* e200 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
+			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
+			MCSR_BUS_WRERR)
+#endif
+
+/* Bit definitions for the DBSR. */
+/*
+ * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define DBSR_IC		0x08000000	/* Instruction Completion */
+#define DBSR_BT		0x04000000	/* Branch Taken */
+#define DBSR_IRPT	0x02000000	/* Exception Debug Event */
+#define DBSR_TIE	0x01000000	/* Trap Instruction Event */
+#define DBSR_IAC1	0x00800000	/* Instr Address Compare 1 Event */
+#define DBSR_IAC2	0x00400000	/* Instr Address Compare 2 Event */
+#define DBSR_IAC3	0x00200000	/* Instr Address Compare 3 Event */
+#define DBSR_IAC4	0x00100000	/* Instr Address Compare 4 Event */
+#define DBSR_DAC1R	0x00080000	/* Data Addr Compare 1 Read Event */
+#define DBSR_DAC1W	0x00040000	/* Data Addr Compare 1 Write Event */
+#define DBSR_DAC2R	0x00020000	/* Data Addr Compare 2 Read Event */
+#define DBSR_DAC2W	0x00010000	/* Data Addr Compare 2 Write Event */
+#define DBSR_RET	0x00008000	/* Return Debug Event */
+#define DBSR_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
+#define DBSR_CRET	0x00000020	/* Critical Return Debug Event */
+#endif
+#ifdef CONFIG_40x
+#define DBSR_IC		0x80000000	/* Instruction Completion */
+#define DBSR_BT		0x40000000	/* Branch taken */
+#define DBSR_IRPT	0x20000000	/* Exception Debug Event */
+#define DBSR_TIE	0x10000000	/* Trap Instruction debug Event */
+#define DBSR_IAC1	0x04000000	/* Instruction Address Compare 1 Event */
+#define DBSR_IAC2	0x02000000	/* Instruction Address Compare 2 Event */
+#define DBSR_IAC3	0x00080000	/* Instruction Address Compare 3 Event */
+#define DBSR_IAC4	0x00040000	/* Instruction Address Compare 4 Event */
+#define DBSR_DAC1R	0x01000000	/* Data Address Compare 1 Read Event */
+#define DBSR_DAC1W	0x00800000	/* Data Address Compare 1 Write Event */
+#define DBSR_DAC2R	0x00400000	/* Data Address Compare 2 Read Event */
+#define DBSR_DAC2W	0x00200000	/* Data Address Compare 2 Write Event */
+#endif
+
+/* Bit definitions related to the ESR. */
+#define ESR_MCI		0x80000000	/* Machine Check - Instruction */
+#define ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
+#define ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
+#define ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
+#define ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
+#define ESR_PIL		0x08000000	/* Program Exception - Illegal */
+#define ESR_PPR		0x04000000	/* Program Exception - Privileged */
+#define ESR_PTR		0x02000000	/* Program Exception - Trap */
+#define ESR_FP		0x01000000	/* Floating Point Operation */
+#define ESR_DST		0x00800000	/* Storage Exception - Data miss */
+#define ESR_DIZ		0x00400000	/* Storage Exception - Zone fault */
+#define ESR_ST		0x00800000	/* Store Operation */
+#define ESR_DLK		0x00200000	/* Data Cache Locking */
+#define ESR_ILK		0x00100000	/* Instr. Cache Locking */
+#define ESR_PUO		0x00040000	/* Unimplemented Operation exception */
+#define ESR_BO		0x00020000	/* Byte Ordering */
+
+/* Bit definitions related to the DBCR0. */
+#if defined(CONFIG_40x)
+#define DBCR0_EDM	0x80000000	/* External Debug Mode */
+#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
+#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
+#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
+#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
+#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
+#define DBCR0_RST_NONE	0x00000000	/* No Reset */
+#define DBCR0_IC	0x08000000	/* Instruction Completion */
+#define DBCR0_ICMP	DBCR0_IC
+#define DBCR0_BT	0x04000000	/* Branch Taken */
+#define DBCR0_BRT	DBCR0_BT
+#define DBCR0_EDE	0x02000000	/* Exception Debug Event */
+#define DBCR0_IRPT	DBCR0_EDE
+#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
+#define DBCR0_IA1	0x00800000	/* Instr Addr compare 1 enable */
+#define DBCR0_IAC1	DBCR0_IA1
+#define DBCR0_IA2	0x00400000	/* Instr Addr compare 2 enable */
+#define DBCR0_IAC2	DBCR0_IA2
+#define DBCR0_IA12	0x00200000	/* Instr Addr 1-2 range enable */
+#define DBCR0_IA12X	0x00100000	/* Instr Addr 1-2 range eXclusive */
+#define DBCR0_IA3	0x00080000	/* Instr Addr compare 3 enable */
+#define DBCR0_IAC3	DBCR0_IA3
+#define DBCR0_IA4	0x00040000	/* Instr Addr compare 4 enable */
+#define DBCR0_IAC4	DBCR0_IA4
+#define DBCR0_IA34	0x00020000	/* Instr Addr 3-4 range Enable */
+#define DBCR0_IA34X	0x00010000	/* Instr Addr 3-4 range eXclusive */
+#define DBCR0_IA12T	0x00008000	/* Instr Addr 1-2 range Toggle */
+#define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
+#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+#elif defined(CONFIG_BOOKE)
+#define DBCR0_EDM	0x80000000	/* External Debug Mode */
+#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
+#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
+/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
+#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
+#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
+#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
+#define DBCR0_RST_NONE	0x00000000	/* No Reset */
+#define DBCR0_ICMP	0x08000000	/* Instruction Completion */
+#define DBCR0_IC	DBCR0_ICMP
+#define DBCR0_BRT	0x04000000	/* Branch Taken */
+#define DBCR0_BT	DBCR0_BRT
+#define DBCR0_IRPT	0x02000000	/* Exception Debug Event */
+#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
+#define DBCR0_TIE	DBCR0_TDE
+#define DBCR0_IAC1	0x00800000	/* Instr Addr compare 1 enable */
+#define DBCR0_IAC2	0x00400000	/* Instr Addr compare 2 enable */
+#define DBCR0_IAC3	0x00200000	/* Instr Addr compare 3 enable */
+#define DBCR0_IAC4	0x00100000	/* Instr Addr compare 4 enable */
+#define DBCR0_DAC1R	0x00080000	/* DAC 1 Read enable */
+#define DBCR0_DAC1W	0x00040000	/* DAC 1 Write enable */
+#define DBCR0_DAC2R	0x00020000	/* DAC 2 Read enable */
+#define DBCR0_DAC2W	0x00010000	/* DAC 2 Write enable */
+#define DBCR0_RET	0x00008000	/* Return Debug Event */
+#define DBCR0_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
+#define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
+#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC12M	0x00800000	/* Instr Addr 1-2 range enable */
+#define DBCR1_IAC12MX	0x00C00000	/* Instr Addr 1-2 range eXclusive */
+#define DBCR1_IAC12AT	0x00010000	/* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC34M	0x00000080	/* Instr Addr 3-4 range enable */
+#define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
+#define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
+
+/* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
+#define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12A	0x00200000	/* DAC 1-2 Asynchronous */
+#endif
+
+/* Bit definitions related to the TCR. */
+#define TCR_WP(x)	(((x)&0x3)<<30)	/* WDT Period */
+#define TCR_WP_MASK	TCR_WP(3)
+#define WP_2_17		0		/* 2^17 clocks */
+#define WP_2_21		1		/* 2^21 clocks */
+#define WP_2_25		2		/* 2^25 clocks */
+#define WP_2_29		3		/* 2^29 clocks */
+#define TCR_WRC(x)	(((x)&0x3)<<28)	/* WDT Reset Control */
+#define TCR_WRC_MASK	TCR_WRC(3)
+#define WRC_NONE	0		/* No reset will occur */
+#define WRC_CORE	1		/* Core reset will occur */
+#define WRC_CHIP	2		/* Chip reset will occur */
+#define WRC_SYSTEM	3		/* System reset will occur */
+#define TCR_WIE		0x08000000	/* WDT Interrupt Enable */
+#define TCR_PIE		0x04000000	/* PIT Interrupt Enable */
+#define TCR_DIE		TCR_PIE		/* DEC Interrupt Enable */
+#define TCR_FP(x)	(((x)&0x3)<<24)	/* FIT Period */
+#define TCR_FP_MASK	TCR_FP(3)
+#define FP_2_9		0		/* 2^9 clocks */
+#define FP_2_13		1		/* 2^13 clocks */
+#define FP_2_17		2		/* 2^17 clocks */
+#define FP_2_21		3		/* 2^21 clocks */
+#define TCR_FIE		0x00800000	/* FIT Interrupt Enable */
+#define TCR_ARE		0x00400000	/* Auto Reload Enable */
+
+/* Bit definitions for the TSR. */
+#define TSR_ENW		0x80000000	/* Enable Next Watchdog */
+#define TSR_WIS		0x40000000	/* WDT Interrupt Status */
+#define TSR_WRS(x)	(((x)&0x3)<<28)	/* WDT Reset Status */
+#define WRS_NONE	0		/* No WDT reset occurred */
+#define WRS_CORE	1		/* WDT forced core reset */
+#define WRS_CHIP	2		/* WDT forced chip reset */
+#define WRS_SYSTEM	3		/* WDT forced system reset */
+#define TSR_PIS		0x08000000	/* PIT Interrupt Status */
+#define TSR_DIS		TSR_PIS		/* DEC Interrupt Status */
+#define TSR_FIS		0x04000000	/* FIT Interrupt Status */
+
+/* Bit definitions for the DCCR. */
+#define DCCR_NOCACHE	0		/* Noncacheable */
+#define DCCR_CACHE	1		/* Cacheable */
+
+/* Bit definitions for DCWR. */
+#define DCWR_COPY	0		/* Copy-back */
+#define DCWR_WRITE	1		/* Write-through */
+
+/* Bit definitions for ICCR. */
+#define ICCR_NOCACHE	0		/* Noncacheable */
+#define ICCR_CACHE	1		/* Cacheable */
+
+/* Bit definitions for L1CSR0. */
+#define L1CSR0_CLFC	0x00000100	/* Cache Lock Bits Flash Clear */
+#define L1CSR0_DCFI	0x00000002	/* Data Cache Flash Invalidate */
+#define L1CSR0_CFI	0x00000002	/* Cache Flash Invalidate */
+#define L1CSR0_DCE	0x00000001	/* Data Cache Enable */
+
+/* Bit definitions for L1CSR1. */
+#define L1CSR1_ICLFR	0x00000100	/* Instr Cache Lock Bits Flash Reset */
+#define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
+#define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
+
+/* Bit definitions for L2CSR0. */
+#define L2CSR0_L2E	0x80000000	/* L2 Cache Enable */
+#define L2CSR0_L2PE	0x40000000	/* L2 Cache Parity/ECC Enable */
+#define L2CSR0_L2WP	0x1c000000	/* L2 I/D Way Partioning */
+#define L2CSR0_L2CM	0x03000000	/* L2 Cache Coherency Mode */
+#define L2CSR0_L2FI	0x00200000	/* L2 Cache Flash Invalidate */
+#define L2CSR0_L2IO	0x00100000	/* L2 Cache Instruction Only */
+#define L2CSR0_L2DO	0x00010000	/* L2 Cache Data Only */
+#define L2CSR0_L2REP	0x00003000	/* L2 Line Replacement Algo */
+#define L2CSR0_L2FL	0x00000800	/* L2 Cache Flush */
+#define L2CSR0_L2LFC	0x00000400	/* L2 Cache Lock Flash Clear */
+#define L2CSR0_L2LOA	0x00000080	/* L2 Cache Lock Overflow Allocate */
+#define L2CSR0_L2LO	0x00000020	/* L2 Cache Lock Overflow */
+
+/* Bit definitions for SGR. */
+#define SGR_NORMAL	0		/* Speculative fetching allowed. */
+#define SGR_GUARDED	1		/* Speculative fetching disallowed. */
+
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
+#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
+#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
+#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
+#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
+#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
+#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
+#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
+#define SPEFSCR_OV	0x00004000	/* Integer overflow */
+#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
+#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
+#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
+#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
+#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
+#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
+#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
+
+/*
+ * The IBM-403 is an even more odd special case, as it is much
+ * older than the IBM-405 series.  We put these down here incase someone
+ * wishes to support these machines again.
+ */
+#ifdef CONFIG_403GCX
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_TBHU	0x3CC	/* Time Base High User-mode */
+#define SPRN_TBLU	0x3CD	/* Time Base Low User-mode */
+#define SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
+#define SPRN_TBHI	0x3DC	/* Time Base High */
+#define SPRN_TBLO	0x3DD	/* Time Base Low */
+#define SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
+#define SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
+#define SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
+#define SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
+#define SPRN_PBU2	0x3FF	/* Protection Bound Upper 2 */
+
+
+/* Bit definitions for the DBCR. */
+#define DBCR_EDM	DBCR0_EDM
+#define DBCR_IDM	DBCR0_IDM
+#define DBCR_RST(x)	(((x) & 0x3) << 28)
+#define DBCR_RST_NONE	0
+#define DBCR_RST_CORE	1
+#define DBCR_RST_CHIP	2
+#define DBCR_RST_SYSTEM	3
+#define DBCR_IC		DBCR0_IC	/* Instruction Completion Debug Evnt */
+#define DBCR_BT		DBCR0_BT	/* Branch Taken Debug Event */
+#define DBCR_EDE	DBCR0_EDE	/* Exception Debug Event */
+#define DBCR_TDE	DBCR0_TDE	/* TRAP Debug Event */
+#define DBCR_FER	0x00F80000	/* First Events Remaining Mask */
+#define DBCR_FT		0x00040000	/* Freeze Timers on Debug Event */
+#define DBCR_IA1	0x00020000	/* Instr. Addr. Compare 1 Enable */
+#define DBCR_IA2	0x00010000	/* Instr. Addr. Compare 2 Enable */
+#define DBCR_D1R	0x00008000	/* Data Addr. Compare 1 Read Enable */
+#define DBCR_D1W	0x00004000	/* Data Addr. Compare 1 Write Enable */
+#define DBCR_D1S(x)	(((x) & 0x3) << 12)	/* Data Adrr. Compare 1 Size */
+#define DAC_BYTE	0
+#define DAC_HALF	1
+#define DAC_WORD	2
+#define DAC_QUAD	3
+#define DBCR_D2R	0x00000800	/* Data Addr. Compare 2 Read Enable */
+#define DBCR_D2W	0x00000400	/* Data Addr. Compare 2 Write Enable */
+#define DBCR_D2S(x)	(((x) & 0x3) << 8)	/* Data Addr. Compare 2 Size */
+#define DBCR_SBT	0x00000040	/* Second Branch Taken Debug Event */
+#define DBCR_SED	0x00000020	/* Second Exception Debug Event */
+#define DBCR_STD	0x00000010	/* Second Trap Debug Event */
+#define DBCR_SIA	0x00000008	/* Second IAC Enable */
+#define DBCR_SDA	0x00000004	/* Second DAC Enable */
+#define DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
+#define DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
+#endif /* 403GCX */
+#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
new file mode 100644
index 00000000000..1e180a59458
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -0,0 +1,72 @@
+/*
+ * Contains register definitions for the Freescale Embedded Performance
+ * Monitor.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
+#define __ASM_POWERPC_REG_FSL_EMB_H__
+
+#ifndef __ASSEMBLY__
+/* Performance Monitor Registers */
+#define mfpmr(rn)	({unsigned int rval; \
+			asm volatile("mfpmr %0," __stringify(rn) \
+				     : "=r" (rval)); rval;})
+#define mtpmr(rn, v)	asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
+#endif /* __ASSEMBLY__ */
+
+/* Freescale Book E Performance Monitor APU Registers */
+#define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
+#define PMRN_PMC1	0x011	/* Performance Monitor Counter 1 */
+#define PMRN_PMC2	0x012	/* Performance Monitor Counter 1 */
+#define PMRN_PMC3	0x013	/* Performance Monitor Counter 1 */
+#define PMRN_PMLCA0	0x090	/* PM Local Control A0 */
+#define PMRN_PMLCA1	0x091	/* PM Local Control A1 */
+#define PMRN_PMLCA2	0x092	/* PM Local Control A2 */
+#define PMRN_PMLCA3	0x093	/* PM Local Control A3 */
+
+#define PMLCA_FC	0x80000000	/* Freeze Counter */
+#define PMLCA_FCS	0x40000000	/* Freeze in Supervisor */
+#define PMLCA_FCU	0x20000000	/* Freeze in User */
+#define PMLCA_FCM1	0x10000000	/* Freeze when PMM==1 */
+#define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
+#define PMLCA_CE	0x04000000	/* Condition Enable */
+
+#define PMLCA_EVENT_MASK 0x007f0000	/* Event field */
+#define PMLCA_EVENT_SHIFT	16
+
+#define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
+#define PMRN_PMLCB1	0x111	/* PM Local Control B1 */
+#define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
+#define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
+
+#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_SHIFT	8
+
+#define PMLCB_THRESHOLD_MASK	0x003f	/* Threshold Field */
+#define PMLCB_THRESHOLD_SHIFT	0
+
+#define PMRN_PMGC0	0x190	/* PM Global Control 0 */
+
+#define PMGC0_FAC	0x80000000	/* Freeze all Counters */
+#define PMGC0_PMIE	0x40000000	/* Interrupt Enable */
+#define PMGC0_FCECE	0x20000000	/* Freeze countes on
+					   Enabled Condition or
+					   Event */
+
+#define PMRN_UPMC0	0x000	/* User Performance Monitor Counter 0 */
+#define PMRN_UPMC1	0x001	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMLCA0	0x080	/* User PM Local Control A0 */
+#define PMRN_UPMLCA1	0x081	/* User PM Local Control A1 */
+#define PMRN_UPMLCA2	0x082	/* User PM Local Control A2 */
+#define PMRN_UPMLCA3	0x083	/* User PM Local Control A3 */
+#define PMRN_UPMLCB0	0x100	/* User PM Local Control B0 */
+#define PMRN_UPMLCB1	0x101	/* User PM Local Control B1 */
+#define PMRN_UPMLCB2	0x102	/* User PM Local Control B2 */
+#define PMRN_UPMLCB3	0x103	/* User PM Local Control B3 */
+#define PMRN_UPMGC0	0x180	/* User PM Global Control 0 */
+
+
+#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/resource.h b/arch/powerpc/include/asm/resource.h
new file mode 100644
index 00000000000..04bc4db8921
--- /dev/null
+++ b/arch/powerpc/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/powerpc/include/asm/rheap.h b/arch/powerpc/include/asm/rheap.h
new file mode 100644
index 00000000000..172381769cf
--- /dev/null
+++ b/arch/powerpc/include/asm/rheap.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm-ppc/rheap.h
+ *
+ * Header file for the implementation of a remote heap.
+ *
+ * Author: Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_PPC_RHEAP_H__
+#define __ASM_PPC_RHEAP_H__
+
+#include <linux/list.h>
+
+typedef struct _rh_block {
+	struct list_head list;
+	unsigned long start;
+	int size;
+	const char *owner;
+} rh_block_t;
+
+typedef struct _rh_info {
+	unsigned int alignment;
+	int max_blocks;
+	int empty_slots;
+	rh_block_t *block;
+	struct list_head empty_list;
+	struct list_head free_list;
+	struct list_head taken_list;
+	unsigned int flags;
+} rh_info_t;
+
+#define RHIF_STATIC_INFO	0x1
+#define RHIF_STATIC_BLOCK	0x2
+
+typedef struct _rh_stats {
+	unsigned long start;
+	int size;
+	const char *owner;
+} rh_stats_t;
+
+#define RHGS_FREE	0
+#define RHGS_TAKEN	1
+
+/* Create a remote heap dynamically */
+extern rh_info_t *rh_create(unsigned int alignment);
+
+/* Destroy a remote heap, created by rh_create() */
+extern void rh_destroy(rh_info_t * info);
+
+/* Initialize in place a remote info block */
+extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
+		    rh_block_t * block);
+
+/* Attach a free region to manage */
+extern int rh_attach_region(rh_info_t * info, unsigned long start, int size);
+
+/* Detach a free region */
+extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size);
+
+/* Allocate the given size from the remote heap (with alignment) */
+extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment,
+		const char *owner);
+
+/* Allocate the given size from the remote heap */
+extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner);
+
+/* Allocate the given size from the given address */
+extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size,
+			    const char *owner);
+
+/* Free the allocated area */
+extern int rh_free(rh_info_t * info, unsigned long start);
+
+/* Get stats for debugging purposes */
+extern int rh_get_stats(rh_info_t * info, int what, int max_stats,
+			rh_stats_t * stats);
+
+/* Simple dump of remote heap info */
+extern void rh_dump(rh_info_t * info);
+
+/* Set owner of taken block */
+extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner);
+
+#endif				/* __ASM_PPC_RHEAP_H__ */
diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h
new file mode 100644
index 00000000000..0018bf80cb2
--- /dev/null
+++ b/arch/powerpc/include/asm/rio.h
@@ -0,0 +1,18 @@
+/*
+ * RapidIO architecture support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ASM_PPC_RIO_H
+#define ASM_PPC_RIO_H
+
+extern void platform_rio_init(void);
+
+#endif				/* ASM_PPC_RIO_H */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
new file mode 100644
index 00000000000..8eaa7b28d9d
--- /dev/null
+++ b/arch/powerpc/include/asm/rtas.h
@@ -0,0 +1,247 @@
+#ifndef _POWERPC_RTAS_H
+#define _POWERPC_RTAS_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+
+/*
+ * Definitions for talking to the RTAS on CHRP machines.
+ *
+ * Copyright (C) 2001 Peter Bergner
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define RTAS_UNKNOWN_SERVICE (-1)
+#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+
+/* Buffer size for ppc_rtas system call. */
+#define RTAS_RMOBUF_MAX (64 * 1024)
+
+/* RTAS return status codes */
+#define RTAS_NOT_SUSPENDABLE	-9004
+#define RTAS_BUSY		-2    /* RTAS Busy */
+#define RTAS_EXTENDED_DELAY_MIN	9900
+#define RTAS_EXTENDED_DELAY_MAX	9905
+
+/*
+ * In general to call RTAS use rtas_token("string") to lookup
+ * an RTAS token for the given string (e.g. "event-scan").
+ * To actually perform the call use
+ *    ret = rtas_call(token, n_in, n_out, ...)
+ * Where n_in is the number of input parameters and
+ *       n_out is the number of output parameters
+ *
+ * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
+ * will be returned as a token.  rtas_call() does look for this
+ * token and error out gracefully so rtas_call(rtas_token("str"), ...)
+ * may be safely used for one-shot calls to RTAS.
+ *
+ */
+
+typedef u32 rtas_arg_t;
+
+struct rtas_args {
+	u32 token;
+	u32 nargs;
+	u32 nret; 
+	rtas_arg_t args[16];
+	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
+};  
+
+struct rtas_t {
+	unsigned long entry;		/* physical address pointer */
+	unsigned long base;		/* physical address pointer */
+	unsigned long size;
+	spinlock_t lock;
+	struct rtas_args args;
+	struct device_node *dev;	/* virtual address pointer */
+};
+
+/* RTAS event classes */
+#define RTAS_INTERNAL_ERROR		0x80000000 /* set bit 0 */
+#define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
+#define RTAS_POWERMGM_EVENTS		0x20000000 /* set bit 2 */
+#define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
+#define RTAS_EVENT_SCAN_ALL_EVENTS	0xf0000000
+
+/* RTAS event severity */
+#define RTAS_SEVERITY_FATAL		0x5
+#define RTAS_SEVERITY_ERROR		0x4
+#define RTAS_SEVERITY_ERROR_SYNC	0x3
+#define RTAS_SEVERITY_WARNING		0x2
+#define RTAS_SEVERITY_EVENT		0x1
+#define RTAS_SEVERITY_NO_ERROR		0x0
+
+/* RTAS event disposition */
+#define RTAS_DISP_FULLY_RECOVERED	0x0
+#define RTAS_DISP_LIMITED_RECOVERY	0x1
+#define RTAS_DISP_NOT_RECOVERED		0x2
+
+/* RTAS event initiator */
+#define RTAS_INITIATOR_UNKNOWN		0x0
+#define RTAS_INITIATOR_CPU		0x1
+#define RTAS_INITIATOR_PCI		0x2
+#define RTAS_INITIATOR_ISA		0x3
+#define RTAS_INITIATOR_MEMORY		0x4
+#define RTAS_INITIATOR_POWERMGM		0x5
+
+/* RTAS event target */
+#define RTAS_TARGET_UNKNOWN		0x0
+#define RTAS_TARGET_CPU			0x1
+#define RTAS_TARGET_PCI			0x2
+#define RTAS_TARGET_ISA			0x3
+#define RTAS_TARGET_MEMORY		0x4
+#define RTAS_TARGET_POWERMGM		0x5
+
+/* RTAS event type */
+#define RTAS_TYPE_RETRY			0x01
+#define RTAS_TYPE_TCE_ERR		0x02
+#define RTAS_TYPE_INTERN_DEV_FAIL	0x03
+#define RTAS_TYPE_TIMEOUT		0x04
+#define RTAS_TYPE_DATA_PARITY		0x05
+#define RTAS_TYPE_ADDR_PARITY		0x06
+#define RTAS_TYPE_CACHE_PARITY		0x07
+#define RTAS_TYPE_ADDR_INVALID		0x08
+#define RTAS_TYPE_ECC_UNCORR		0x09
+#define RTAS_TYPE_ECC_CORR		0x0a
+#define RTAS_TYPE_EPOW			0x40
+#define RTAS_TYPE_PLATFORM		0xE0
+#define RTAS_TYPE_IO			0xE1
+#define RTAS_TYPE_INFO			0xE2
+#define RTAS_TYPE_DEALLOC		0xE3
+#define RTAS_TYPE_DUMP			0xE4
+/* I don't add PowerMGM events right now, this is a different topic */ 
+#define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
+#define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
+#define RTAS_TYPE_PMGM_LID_OPEN		0x62
+#define RTAS_TYPE_PMGM_LID_CLOSE	0x63
+#define RTAS_TYPE_PMGM_SLEEP_BTN	0x64
+#define RTAS_TYPE_PMGM_WAKE_BTN		0x65
+#define RTAS_TYPE_PMGM_BATTERY_WARN	0x66
+#define RTAS_TYPE_PMGM_BATTERY_CRIT	0x67
+#define RTAS_TYPE_PMGM_SWITCH_TO_BAT	0x68
+#define RTAS_TYPE_PMGM_SWITCH_TO_AC	0x69
+#define RTAS_TYPE_PMGM_KBD_OR_MOUSE	0x6a
+#define RTAS_TYPE_PMGM_ENCLOS_OPEN	0x6b
+#define RTAS_TYPE_PMGM_ENCLOS_CLOSED	0x6c
+#define RTAS_TYPE_PMGM_RING_INDICATE	0x6d
+#define RTAS_TYPE_PMGM_LAN_ATTENTION	0x6e
+#define RTAS_TYPE_PMGM_TIME_ALARM	0x6f
+#define RTAS_TYPE_PMGM_CONFIG_CHANGE	0x70
+#define RTAS_TYPE_PMGM_SERVICE_PROC	0x71
+
+struct rtas_error_log {
+	unsigned long version:8;		/* Architectural version */
+	unsigned long severity:3;		/* Severity level of error */
+	unsigned long disposition:2;		/* Degree of recovery */
+	unsigned long extended:1;		/* extended log present? */
+	unsigned long /* reserved */ :2;	/* Reserved for future use */
+	unsigned long initiator:4;		/* Initiator of event */
+	unsigned long target:4;			/* Target of failed operation */
+	unsigned long type:8;			/* General event or error*/
+	unsigned long extended_log_length:32;	/* length in bytes */
+	unsigned char buffer[1];
+};
+
+/*
+ * This can be set by the rtas_flash module so that it can get called
+ * as the absolutely last thing before the kernel terminates.
+ */
+extern void (*rtas_flash_term_hook)(int);
+
+extern struct rtas_t rtas;
+
+extern void enter_rtas(unsigned long);
+extern int rtas_token(const char *service);
+extern int rtas_service_present(const char *service);
+extern int rtas_call(int token, int, int, int *, ...);
+extern void rtas_restart(char *cmd);
+extern void rtas_power_off(void);
+extern void rtas_halt(void);
+extern void rtas_os_term(char *str);
+extern int rtas_get_sensor(int sensor, int index, int *state);
+extern int rtas_get_power_level(int powerdomain, int *level);
+extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
+extern int rtas_set_indicator(int indicator, int index, int new_value);
+extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
+extern void rtas_progress(char *s, unsigned short hex);
+extern void rtas_initialize(void);
+
+struct rtc_time;
+extern unsigned long rtas_get_boot_time(void);
+extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
+extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
+
+extern unsigned int rtas_busy_delay_time(int status);
+extern unsigned int rtas_busy_delay(int status);
+
+extern int early_init_dt_scan_rtas(unsigned long node,
+		const char *uname, int depth, void *data);
+
+extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+
+/* Error types logged.  */
+#define ERR_FLAG_ALREADY_LOGGED	0x0
+#define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
+#define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
+#define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */
+
+/* All the types and not flags */
+#define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
+
+#define RTAS_DEBUG KERN_DEBUG "RTAS: "
+ 
+#define RTAS_ERROR_LOG_MAX 2048
+
+/*
+ * Return the firmware-specified size of the error log buffer
+ *  for all rtas calls that require an error buffer argument.
+ *  This includes 'check-exception' and 'rtas-last-error'.
+ */
+extern int rtas_get_error_log_max(void);
+
+/* Event Scan Parameters */
+#define EVENT_SCAN_ALL_EVENTS	0xf0000000
+#define SURVEILLANCE_TOKEN	9000
+#define LOG_NUMBER		64		/* must be a power of two */
+#define LOG_NUMBER_MASK		(LOG_NUMBER-1)
+
+/* Some RTAS ops require a data buffer and that buffer must be < 4G.
+ * Rather than having a memory allocator, just use this buffer
+ * (get the lock first), make the RTAS call.  Copy the data instead
+ * of holding the buffer for long.
+ */
+
+#define RTAS_DATA_BUF_SIZE 4096
+extern spinlock_t rtas_data_buf_lock;
+extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
+
+/* RMO buffer reserved for user-space RTAS use */
+extern unsigned long rtas_rmo_buf;
+
+#define GLOBAL_INTERRUPT_QUEUE 9005
+
+/**
+ * rtas_config_addr - Format a busno, devfn and reg for RTAS.
+ * @busno: The bus number.
+ * @devfn: The device and function number as encoded by PCI_DEVFN().
+ * @reg: The register number.
+ *
+ * This function encodes the given busno, devfn and register number as
+ * required for RTAS calls that take a "config_addr" parameter.
+ * See PAPR requirement 7.3.4-1 for more info.
+ */
+static inline u32 rtas_config_addr(int busno, int devfn, int reg)
+{
+	return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) |
+			(devfn << 8) | (reg & 0xff);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/rtc.h b/arch/powerpc/include/asm/rtc.h
new file mode 100644
index 00000000000..f5802926b6c
--- /dev/null
+++ b/arch/powerpc/include/asm/rtc.h
@@ -0,0 +1,78 @@
+/*
+ * Real-time clock definitions and interfaces
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Based on:
+ * include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ *
+ * And the old drivers/macintosh/rtc.c which was heavily based on:
+ * Linux/SPARC Real Time Clock Driver
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ *
+ * With additional work by Paul Mackerras and Franz Sirl.
+ */
+
+#ifndef __ASM_POWERPC_RTC_H__
+#define __ASM_POWERPC_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.get_rtc_time)
+		ppc_md.get_rtc_time(time);
+	return RTC_24H;
+}
+
+/* Set the current date and time in the real time clock. */
+static inline int set_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.set_rtc_time)
+		return ppc_md.set_rtc_time(time);
+	return -EINVAL;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_RTC_H__ */
diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h
new file mode 100644
index 00000000000..24cd9281ec3
--- /dev/null
+++ b/arch/powerpc/include/asm/rwsem.h
@@ -0,0 +1,173 @@
+#ifndef _ASM_POWERPC_RWSEM_H
+#define _ASM_POWERPC_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * R/W semaphores for PPC using the stuff in lib/rwsem.c.
+ * Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ */
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	/* XXX this should be able to be an atomic_t  -- paulus */
+	signed int		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+	  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)					\
+	do {						\
+		static struct lock_class_key __key;	\
+							\
+		__init_rwsem((sem), #sem, &__key);	\
+	} while (0)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0))
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		rwsem_down_write_failed(sem);
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_RWSEM_H */
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
new file mode 100644
index 00000000000..fcf7d55afe4
--- /dev/null
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_POWERPC_SCATTERLIST_H
+#define _ASM_POWERPC_SCATTERLIST_H
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <asm/dma.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+	unsigned int length;
+
+	/* For TCE support */
+	dma_addr_t dma_address;
+	u32 dma_length;
+};
+
+/*
+ * These macros should be used after a dma_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifdef __powerpc64__
+#define sg_dma_len(sg)		((sg)->dma_length)
+#else
+#define sg_dma_len(sg)		((sg)->length)
+#endif
+
+#ifdef __powerpc64__
+#define ISA_DMA_THRESHOLD	(~0UL)
+#endif
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h
new file mode 100644
index 00000000000..853765eb1f6
--- /dev/null
+++ b/arch/powerpc/include/asm/seccomp.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SECCOMP_H
+#define _ASM_POWERPC_SECCOMP_H
+
+#ifdef __KERNEL__
+#include <linux/thread_info.h>
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif	/* _ASM_POWERPC_SECCOMP_H */
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
new file mode 100644
index 00000000000..07956f3e784
--- /dev/null
+++ b/arch/powerpc/include/asm/sections.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_POWERPC_SECTIONS_H
+#define _ASM_POWERPC_SECTIONS_H
+#ifdef __KERNEL__
+
+#include <linux/elf.h>
+#include <linux/uaccess.h>
+#include <asm-generic/sections.h>
+
+#ifdef __powerpc64__
+
+extern char _end[];
+
+static inline int in_kernel_text(unsigned long addr)
+{
+	if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end)
+		return 1;
+
+	return 0;
+}
+
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+	struct ppc64_opd_entry *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->funcaddr, p))
+		ptr = p;
+	return ptr;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_SECTIONS_H */
diff --git a/arch/powerpc/include/asm/sembuf.h b/arch/powerpc/include/asm/sembuf.h
new file mode 100644
index 00000000000..99a41938ae3
--- /dev/null
+++ b/arch/powerpc/include/asm/sembuf.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_POWERPC_SEMBUF_H
+#define _ASM_POWERPC_SEMBUF_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * The semid64_ds structure for PPC architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+#ifndef __powerpc64__
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t	sem_otime;	/* last semop time */
+#ifndef __powerpc64__
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t	sem_ctime;	/* last change time */
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif	/* _ASM_POWERPC_SEMBUF_H */
diff --git a/arch/powerpc/include/asm/serial.h b/arch/powerpc/include/asm/serial.h
new file mode 100644
index 00000000000..3e8589b43cb
--- /dev/null
+++ b/arch/powerpc/include/asm/serial.h
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_SERIAL_H
+#define _ASM_POWERPC_SERIAL_H
+
+/*
+ * Serial ports are not listed here, because they are discovered
+ * through the device tree.
+ */
+
+/* Default baud base if not found in device-tree */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#ifdef CONFIG_PPC_UDBG_16550
+extern void find_legacy_serial_ports(void);
+#else
+#define find_legacy_serial_ports()	do { } while (0)
+#endif
+
+#endif /* _PPC64_SERIAL_H */
diff --git a/arch/powerpc/include/asm/setjmp.h b/arch/powerpc/include/asm/setjmp.h
new file mode 100644
index 00000000000..279d03a1eec
--- /dev/null
+++ b/arch/powerpc/include/asm/setjmp.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright © 2008 Michael Neuling IBM Corporation
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef _ASM_POWERPC_SETJMP_H
+#define _ASM_POWERPC_SETJMP_H
+
+#define JMP_BUF_LEN    23
+
+extern long setjmp(long *);
+extern void longjmp(long *, long);
+
+#endif /* _ASM_POWERPC_SETJMP_H */
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
new file mode 100644
index 00000000000..817fac0a071
--- /dev/null
+++ b/arch/powerpc/include/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_SETUP_H
+#define _ASM_POWERPC_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif	/* _ASM_POWERPC_SETUP_H */
diff --git a/arch/powerpc/include/asm/shmbuf.h b/arch/powerpc/include/asm/shmbuf.h
new file mode 100644
index 00000000000..8efa39698b6
--- /dev/null
+++ b/arch/powerpc/include/asm/shmbuf.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_POWERPC_SHMBUF_H
+#define _ASM_POWERPC_SHMBUF_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * The shmid64_ds structure for PPC architecture.
+ *
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+#ifndef __powerpc64__
+	unsigned long		__unused1;
+#endif
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifndef __powerpc64__
+	unsigned long		__unused2;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifndef __powerpc64__
+	unsigned long		__unused3;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifndef __powerpc64__
+	unsigned long		__unused4;
+#endif
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused5;
+	unsigned long		__unused6;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif	/* _ASM_POWERPC_SHMBUF_H */
diff --git a/arch/powerpc/include/asm/shmparam.h b/arch/powerpc/include/asm/shmparam.h
new file mode 100644
index 00000000000..5cda42a6d39
--- /dev/null
+++ b/arch/powerpc/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_SHMPARAM_H
+#define _ASM_POWERPC_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif	/* _ASM_POWERPC_SHMPARAM_H */
diff --git a/arch/powerpc/include/asm/sigcontext.h b/arch/powerpc/include/asm/sigcontext.h
new file mode 100644
index 00000000000..9c1f24fd5d1
--- /dev/null
+++ b/arch/powerpc/include/asm/sigcontext.h
@@ -0,0 +1,87 @@
+#ifndef _ASM_POWERPC_SIGCONTEXT_H
+#define _ASM_POWERPC_SIGCONTEXT_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#ifdef __powerpc64__
+#include <asm/elf.h>
+#endif
+
+struct sigcontext {
+	unsigned long	_unused[4];
+	int		signal;
+#ifdef __powerpc64__
+	int		_pad0;
+#endif
+	unsigned long	handler;
+	unsigned long	oldmask;
+	struct pt_regs	__user *regs;
+#ifdef __powerpc64__
+	elf_gregset_t	gp_regs;
+	elf_fpregset_t	fp_regs;
+/*
+ * To maintain compatibility with current implementations the sigcontext is
+ * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t)
+ * followed by an unstructured (vmx_reserve) field of 69 doublewords.  This
+ * allows the array of vector registers to be quadword aligned independent of
+ * the alignment of the containing sigcontext or ucontext. It is the
+ * responsibility of the code setting the sigcontext to set this pointer to
+ * either NULL (if this processor does not support the VMX feature) or the
+ * address of the first quadword within the allocated (vmx_reserve) area.
+ *
+ * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with
+ * an array of 34 quadword entries (elf_vrregset_t).  The entries with
+ * indexes 0-31 contain the corresponding vector registers.  The entry with
+ * index 32 contains the vscr as the last word (offset 12) within the
+ * quadword.  This allows the vscr to be stored as either a quadword (since
+ * it must be copied via a vector register to/from storage) or as a word.
+ * The entry with index 33 contains the vrsave as the first word (offset 0)
+ * within the quadword.
+ *
+ * Part of the VSX data is stored here also by extending vmx_restore
+ * by an additional 32 double words.  Architecturally the layout of
+ * the VSR registers and how they overlap on top of the legacy FPR and
+ * VR registers is shown below:
+ *
+ *                    VSR doubleword 0               VSR doubleword 1
+ *           ----------------------------------------------------------------
+ *   VSR[0]  |             FPR[0]            |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[1]  |             FPR[1]            |                              |
+ *           ----------------------------------------------------------------
+ *           |              ...              |                              |
+ *           |              ...              |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[30] |             FPR[30]           |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[31] |             FPR[31]           |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[32] |                             VR[0]                            |
+ *           ----------------------------------------------------------------
+ *   VSR[33] |                             VR[1]                            |
+ *           ----------------------------------------------------------------
+ *           |                              ...                             |
+ *           |                              ...                             |
+ *           ----------------------------------------------------------------
+ *   VSR[62] |                             VR[30]                           |
+ *           ----------------------------------------------------------------
+ *   VSR[63] |                             VR[31]                           |
+ *           ----------------------------------------------------------------
+ *
+ * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63
+ * is stored at the start of vmx_reserve.  vmx_reserve is extended for
+ * backwards compatility to store VSR 0-31 doubleword 1 after the VMX
+ * registers and vscr/vrsave.
+ */
+	elf_vrreg_t	__user *v_regs;
+	long		vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1];
+#endif
+};
+
+#endif /* _ASM_POWERPC_SIGCONTEXT_H */
diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/asm/siginfo.h
new file mode 100644
index 00000000000..12f1bce037b
--- /dev/null
+++ b/arch/powerpc/include/asm/siginfo.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_POWERPC_SIGINFO_H
+#define _ASM_POWERPC_SIGINFO_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __powerpc64__
+#    define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#    define SI_PAD_SIZE32		((SI_MAX_SIZE/sizeof(int)) - 3)
+#endif
+
+#include <asm-generic/siginfo.h>
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
+#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#endif	/* _ASM_POWERPC_SIGINFO_H */
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
new file mode 100644
index 00000000000..a7360cdd99e
--- /dev/null
+++ b/arch/powerpc/include/asm/signal.h
@@ -0,0 +1,150 @@
+#ifndef _ASM_POWERPC_SIGNAL_H
+#define _ASM_POWERPC_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG		64
+#ifdef __powerpc64__
+#define _NSIG_BPW	64
+#else
+#define _NSIG_BPW	32
+#endif
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001U
+#define SA_NOCLDWAIT	0x00000002U
+#define SA_SIGINFO	0x00000004U
+#define SA_ONSTACK	0x08000000U
+#define SA_RESTART	0x10000000U
+#define SA_NODEFER	0x40000000U
+#define SA_RESETHAND	0x80000000U
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000U
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+struct pt_regs;
+extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif /* __KERNEL__ */
+
+#ifndef __powerpc64__
+/*
+ * These are parameters to dbg_sigreturn syscall.  They enable or
+ * disable certain debugging things that can be done from signal
+ * handlers.  The dbg_sigreturn syscall *must* be called from a
+ * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
+ * array of struct sig_dbg_op, which has the debug operations to
+ * perform before returning from the signal.
+ */
+struct sig_dbg_op {
+	int dbg_type;
+	unsigned long dbg_value;
+};
+
+/* Enable or disable single-stepping.  The value sets the state. */
+#define SIG_DBG_SINGLE_STEPPING		1
+
+/* Enable or disable branch tracing.  The value sets the state. */
+#define SIG_DBG_BRANCH_TRACING		2
+#endif /* ! __powerpc64__ */
+
+#endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
new file mode 100644
index 00000000000..4d28e1e4521
--- /dev/null
+++ b/arch/powerpc/include/asm/smp.h
@@ -0,0 +1,127 @@
+/* 
+ * smp.h: PowerPC-specific SMP code.
+ *
+ * Original was a copy of sparc smp.h.  Now heavily modified
+ * for PPC.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_SMP_H
+#define _ASM_POWERPC_SMP_H
+#ifdef __KERNEL__
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+#include <asm/percpu.h>
+
+extern int boot_cpuid;
+
+extern void cpu_die(void);
+
+#ifdef CONFIG_SMP
+
+extern void smp_send_debugger_break(int cpu);
+extern void smp_message_recv(int);
+
+DECLARE_PER_CPU(unsigned int, pvr);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void fixup_irqs(cpumask_t map);
+int generic_cpu_disable(void);
+int generic_cpu_enable(unsigned int cpu);
+void generic_cpu_die(unsigned int cpu);
+void generic_mach_cpu_die(void);
+#endif
+
+#ifdef CONFIG_PPC64
+#define raw_smp_processor_id()	(local_paca->paca_index)
+#define hard_smp_processor_id() (get_paca()->hw_cpu_id)
+#else
+/* 32-bit */
+extern int smp_hw_index[];
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+#define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
+#define get_hard_smp_processor_id(cpu)	(smp_hw_index[(cpu)])
+#define set_hard_smp_processor_id(cpu, phys)\
+					(smp_hw_index[(cpu)] = (phys))
+#endif
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+extern int cpu_to_core_id(int cpu);
+
+/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
+ *
+ * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
+ * in /proc/interrupts will be wrong!!! --Troy */
+#define PPC_MSG_CALL_FUNCTION   0
+#define PPC_MSG_RESCHEDULE      1
+#define PPC_MSG_CALL_FUNC_SINGLE	2
+#define PPC_MSG_DEBUGGER_BREAK  3
+
+void smp_init_iSeries(void);
+void smp_init_pSeries(void);
+void smp_init_cell(void);
+void smp_init_celleb(void);
+void smp_setup_cpu_maps(void);
+void smp_setup_cpu_sibling_map(void);
+
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+
+#else
+/* for UP */
+#define hard_smp_processor_id()		0
+#define smp_setup_cpu_maps()
+
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PPC64
+#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
+#define set_hard_smp_processor_id(CPU, VAL) \
+	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+
+extern void smp_release_cpus(void);
+
+#else
+/* 32-bit */
+#ifndef CONFIG_SMP
+extern int boot_cpuid_phys;
+#define get_hard_smp_processor_id(cpu) 	boot_cpuid_phys
+#define set_hard_smp_processor_id(cpu, phys)
+#endif
+#endif
+
+extern int smt_enabled_at_boot;
+
+extern int smp_mpic_probe(void);
+extern void smp_mpic_setup_cpu(int cpu);
+extern void smp_generic_kick_cpu(int nr);
+
+extern void smp_generic_give_timebase(void);
+extern void smp_generic_take_timebase(void);
+
+extern struct smp_ops_t *smp_ops;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SMP_H) */
diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h
new file mode 100644
index 00000000000..7ae2753da56
--- /dev/null
+++ b/arch/powerpc/include/asm/smu.h
@@ -0,0 +1,700 @@
+#ifndef _SMU_H
+#define _SMU_H
+
+/*
+ * Definitions for talking to the SMU chip in newer G5 PowerMacs
+ */
+#ifdef __KERNEL__
+#include <linux/list.h>
+#endif
+#include <linux/types.h>
+
+/*
+ * Known SMU commands
+ *
+ * Most of what is below comes from looking at the Open Firmware driver,
+ * though this is still incomplete and could use better documentation here
+ * or there...
+ */
+
+
+/*
+ * Partition info commands
+ *
+ * These commands are used to retrieve the sdb-partition-XX datas from
+ * the SMU. The length is always 2. First byte is the subcommand code
+ * and second byte is the partition ID.
+ *
+ * The reply is 6 bytes:
+ *
+ *  - 0..1 : partition address
+ *  - 2    : a byte containing the partition ID
+ *  - 3    : length (maybe other bits are rest of header ?)
+ *
+ * The data must then be obtained with calls to another command:
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below).
+ */
+#define SMU_CMD_PARTITION_COMMAND		0x3e
+#define   SMU_CMD_PARTITION_LATEST		0x01
+#define   SMU_CMD_PARTITION_BASE		0x02
+#define   SMU_CMD_PARTITION_UPDATE		0x03
+
+
+/*
+ * Fan control
+ *
+ * This is a "mux" for fan control commands. The command seem to
+ * act differently based on the number of arguments. With 1 byte
+ * of argument, this seem to be queries for fans status, setpoint,
+ * etc..., while with 0xe arguments, we will set the fans speeds.
+ *
+ * Queries (1 byte arg):
+ * ---------------------
+ *
+ * arg=0x01: read RPM fans status
+ * arg=0x02: read RPM fans setpoint
+ * arg=0x11: read PWM fans status
+ * arg=0x12: read PWM fans setpoint
+ *
+ * the "status" queries return the current speed while the "setpoint" ones
+ * return the programmed/target speed. It _seems_ that the result is a bit
+ * mask in the first byte of active/available fans, followed by 6 words (16
+ * bits) containing the requested speed.
+ *
+ * Setpoint (14 bytes arg):
+ * ------------------------
+ *
+ * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the
+ * mask of fans affected by the command. Followed by 6 words containing the
+ * setpoint value for selected fans in the mask (or 0 if mask value is 0)
+ */
+#define SMU_CMD_FAN_COMMAND			0x4a
+
+
+/*
+ * Battery access
+ *
+ * Same command number as the PMU, could it be same syntax ?
+ */
+#define SMU_CMD_BATTERY_COMMAND			0x6f
+#define   SMU_CMD_GET_BATTERY_INFO		0x00
+
+/*
+ * Real time clock control
+ *
+ * This is a "mux", first data byte contains the "sub" command.
+ * The "RTC" part of the SMU controls the date, time, powerup
+ * timer, but also a PRAM
+ *
+ * Dates are in BCD format on 7 bytes:
+ * [sec] [min] [hour] [weekday] [month day] [month] [year]
+ * with month being 1 based and year minus 100
+ */
+#define SMU_CMD_RTC_COMMAND			0x8e
+#define   SMU_CMD_RTC_SET_PWRUP_TIMER		0x00 /* i: 7 bytes date */
+#define   SMU_CMD_RTC_GET_PWRUP_TIMER		0x01 /* o: 7 bytes date */
+#define   SMU_CMD_RTC_STOP_PWRUP_TIMER		0x02
+#define   SMU_CMD_RTC_SET_PRAM_BYTE_ACC		0x20 /* i: 1 byte (address?) */
+#define   SMU_CMD_RTC_SET_PRAM_AUTOINC		0x21 /* i: 1 byte (data?) */
+#define   SMU_CMD_RTC_SET_PRAM_LO_BYTES 	0x22 /* i: 10 bytes */
+#define   SMU_CMD_RTC_SET_PRAM_HI_BYTES 	0x23 /* i: 10 bytes */
+#define   SMU_CMD_RTC_GET_PRAM_BYTE		0x28 /* i: 1 bytes (address?) */
+#define   SMU_CMD_RTC_GET_PRAM_LO_BYTES 	0x29 /* o: 10 bytes */
+#define   SMU_CMD_RTC_GET_PRAM_HI_BYTES 	0x2a /* o: 10 bytes */
+#define	  SMU_CMD_RTC_SET_DATETIME		0x80 /* i: 7 bytes date */
+#define   SMU_CMD_RTC_GET_DATETIME		0x81 /* o: 7 bytes date */
+
+ /*
+  * i2c commands
+  *
+  * To issue an i2c command, first is to send a parameter block to the
+  * the SMU. This is a command of type 0x9a with 9 bytes of header
+  * eventually followed by data for a write:
+  *
+  * 0: bus number (from device-tree usually, SMU has lots of busses !)
+  * 1: transfer type/format (see below)
+  * 2: device address. For combined and combined4 type transfers, this
+  *    is the "write" version of the address (bit 0x01 cleared)
+  * 3: subaddress length (0..3)
+  * 4: subaddress byte 0 (or only byte for subaddress length 1)
+  * 5: subaddress byte 1
+  * 6: subaddress byte 2
+  * 7: combined address (device address for combined mode data phase)
+  * 8: data length
+  *
+  * The transfer types are the same good old Apple ones it seems,
+  * that is:
+  *   - 0x00: Simple transfer
+  *   - 0x01: Subaddress transfer (addr write + data tx, no restart)
+  *   - 0x02: Combined transfer (addr write + restart + data tx)
+  *
+  * This is then followed by actual data for a write.
+  *
+  * At this point, the OF driver seems to have a limitation on transfer
+  * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
+  * wether this is just an OF limit due to some temporary buffer size
+  * or if this is an SMU imposed limit. This driver has the same limitation
+  * for now as I use a 0x10 bytes temporary buffer as well
+  *
+  * Once that is completed, a response is expected from the SMU. This is
+  * obtained via a command of type 0x9a with a length of 1 byte containing
+  * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's
+  * though I can't tell yet if this is actually necessary. Once this command
+  * is complete, at this point, all I can tell is what OF does. OF tests
+  * byte 0 of the reply:
+  *   - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ?
+  *   - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0)
+  *   - on write, < 0 -> failure (immediate exit)
+  *   - else, OF just exists (without error, weird)
+  *
+  * So on read, there is this wait-for-busy thing when getting a 0xfc or
+  * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and
+  * doing the above again until either the retries expire or the result
+  * is no longer 0xfe or 0xfc
+  *
+  * The Darwin I2C driver is less subtle though. On any non-success status
+  * from the response command, it waits 5ms and tries again up to 20 times,
+  * it doesn't differenciate between fatal errors or "busy" status.
+  *
+  * This driver provides an asynchronous paramblock based i2c command
+  * interface to be used either directly by low level code or by a higher
+  * level driver interfacing to the linux i2c layer. The current
+  * implementation of this relies on working timers & timer interrupts
+  * though, so be careful of calling context for now. This may be "fixed"
+  * in the future by adding a polling facility.
+  */
+#define SMU_CMD_I2C_COMMAND			0x9a
+          /* transfer types */
+#define   SMU_I2C_TRANSFER_SIMPLE	0x00
+#define   SMU_I2C_TRANSFER_STDSUB	0x01
+#define   SMU_I2C_TRANSFER_COMBINED	0x02
+
+/*
+ * Power supply control
+ *
+ * The "sub" command is an ASCII string in the data, the
+ * data length is that of the string.
+ *
+ * The VSLEW command can be used to get or set the voltage slewing.
+ *  - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ *    reply at data offset 6, 7 and 8.
+ *  - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ *    used to set the voltage slewing point. The SMU replies with "DONE"
+ * I yet have to figure out their exact meaning of those 3 bytes in
+ * both cases. They seem to be:
+ *  x = processor mask
+ *  y = op. point index
+ *  z = processor freq. step index
+ * I haven't yet decyphered result codes
+ *
+ */
+#define SMU_CMD_POWER_COMMAND			0xaa
+#define   SMU_CMD_POWER_RESTART		       	"RESTART"
+#define   SMU_CMD_POWER_SHUTDOWN		"SHUTDOWN"
+#define   SMU_CMD_POWER_VOLTAGE_SLEW		"VSLEW"
+
+/*
+ * Read ADC sensors
+ *
+ * This command takes one byte of parameter: the sensor ID (or "reg"
+ * value in the device-tree) and returns a 16 bits value
+ */
+#define SMU_CMD_READ_ADC			0xd8
+
+
+/* Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ *
+ * Parameters:
+ *   1: subcommand
+ */
+#define SMU_CMD_MISC_df_COMMAND			0xdf
+
+/*
+ * Sets "system ready" status
+ *
+ * I did not yet understand how it exactly works or what it does.
+ *
+ * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used
+ * the same codebase for all OF versions. On PowerBooks, this command would
+ * enable the backlight. For the G5s, it only activates the front LED. However,
+ * don't take this for granted.
+ *
+ * Parameters:
+ *   2: status [0x00, 0x01 or 0x02]
+ */
+#define   SMU_CMD_MISC_df_SET_DISPLAY_LIT	0x02
+
+/*
+ * Sets mode of power switch.
+ *
+ * What this actually does is not yet known. Maybe it enables some interrupt.
+ *
+ * Parameters:
+ *   2: enable power switch? [0x00 or 0x01]
+ *   3 (optional): enable nmi? [0x00 or 0x01]
+ *
+ * Returns:
+ *   If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
+ *   NMI is enabled. Otherwise unknown.
+ */
+#define   SMU_CMD_MISC_df_NMI_OPTION		0x04
+
+/* Sets LED dimm offset.
+ *
+ * The front LED dimms itself during sleep. Its brightness (or, well, the PWM
+ * frequency) depends on current time. Therefore, the SMU needs to know the
+ * timezone.
+ *
+ * Parameters:
+ *   2-8: unknown (BCD coding)
+ */
+#define   SMU_CMD_MISC_df_DIMM_OFFSET		0x99
+
+
+/*
+ * Version info commands
+ *
+ * Parameters:
+ *   1 (optional): Specifies version part to retrieve
+ *
+ * Returns:
+ *   Version value
+ */
+#define SMU_CMD_VERSION_COMMAND			0xea
+#define   SMU_VERSION_RUNNING			0x00
+#define   SMU_VERSION_BASE			0x01
+#define   SMU_VERSION_UPDATE			0x02
+
+
+/*
+ * Switches
+ *
+ * These are switches whose status seems to be known to the SMU.
+ *
+ * Parameters:
+ *   none
+ *
+ * Result:
+ *   Switch bits (ORed, see below)
+ */
+#define SMU_CMD_SWITCHES			0xdc
+
+/* Switches bits */
+#define SMU_SWITCH_CASE_CLOSED			0x01
+#define SMU_SWITCH_AC_POWER			0x04
+#define SMU_SWITCH_POWER_SWITCH			0x08
+
+
+/*
+ * Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ *
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
+ * transfer blocks of data from the SMU. So far, I've decrypted it's
+ * usage to retrieve partition data. In order to do that, you have to
+ * break your transfer in "chunks" since that command cannot transfer
+ * more than a chunk at a time. The chunk size used by OF is 0xe bytes,
+ * but it seems that the darwin driver will let you do 0x1e bytes if
+ * your "PMU" version is >= 0x30. You can get the "PMU" version apparently
+ * either in the last 16 bits of property "smu-version-pmu" or as the 16
+ * bytes at offset 1 of "smu-version-info"
+ *
+ * For each chunk, the command takes 7 bytes of arguments:
+ *  byte 0: subcommand code (0x02)
+ *  byte 1: 0x04 (always, I don't know what it means, maybe the address
+ *                space to use or some other nicety. It's hard coded in OF)
+ *  byte 2..5: SMU address of the chunk (big endian 32 bits)
+ *  byte 6: size to transfer (up to max chunk size)
+ *
+ * The data is returned directly
+ */
+#define SMU_CMD_MISC_ee_COMMAND			0xee
+#define   SMU_CMD_MISC_ee_GET_DATABLOCK_REC	0x02
+
+/* Retrieves currently used watts.
+ *
+ * Parameters:
+ *   1: 0x03 (Meaning unknown)
+ */
+#define   SMU_CMD_MISC_ee_GET_WATTS		0x03
+
+#define   SMU_CMD_MISC_ee_LEDS_CTRL		0x04 /* i: 00 (00,01) [00] */
+#define   SMU_CMD_MISC_ee_GET_DATA		0x05 /* i: 00 , o: ?? */
+
+
+/*
+ * Power related commands
+ *
+ * Parameters:
+ *   1: subcommand
+ */
+#define SMU_CMD_POWER_EVENTS_COMMAND		0x8f
+
+/* SMU_POWER_EVENTS subcommands */
+enum {
+	SMU_PWR_GET_POWERUP_EVENTS      = 0x00,
+	SMU_PWR_SET_POWERUP_EVENTS      = 0x01,
+	SMU_PWR_CLR_POWERUP_EVENTS      = 0x02,
+	SMU_PWR_GET_WAKEUP_EVENTS       = 0x03,
+	SMU_PWR_SET_WAKEUP_EVENTS       = 0x04,
+	SMU_PWR_CLR_WAKEUP_EVENTS       = 0x05,
+
+	/*
+	 * Get last shutdown cause
+	 *
+	 * Returns:
+	 *   1 byte (signed char): Last shutdown cause. Exact meaning unknown.
+	 */
+	SMU_PWR_LAST_SHUTDOWN_CAUSE	= 0x07,
+
+	/*
+	 * Sets or gets server ID. Meaning or use is unknown.
+	 *
+	 * Parameters:
+	 *   2 (optional): Set server ID (1 byte)
+	 *
+	 * Returns:
+	 *   1 byte (server ID?)
+	 */
+	SMU_PWR_SERVER_ID		= 0x08,
+};
+
+/* Power events wakeup bits */
+enum {
+	SMU_PWR_WAKEUP_KEY              = 0x01, /* Wake on key press */
+	SMU_PWR_WAKEUP_AC_INSERT        = 0x02, /* Wake on AC adapter plug */
+	SMU_PWR_WAKEUP_AC_CHANGE        = 0x04,
+	SMU_PWR_WAKEUP_LID_OPEN         = 0x08,
+	SMU_PWR_WAKEUP_RING             = 0x10,
+};
+
+
+/*
+ * - Kernel side interface -
+ */
+
+#ifdef __KERNEL__
+
+/*
+ * Asynchronous SMU commands
+ *
+ * Fill up this structure and submit it via smu_queue_command(),
+ * and get notified by the optional done() callback, or because
+ * status becomes != 1
+ */
+
+struct smu_cmd;
+
+struct smu_cmd
+{
+	/* public */
+	u8			cmd;		/* command */
+	int			data_len;	/* data len */
+	int			reply_len;	/* reply len */
+	void			*data_buf;	/* data buffer */
+	void			*reply_buf;	/* reply buffer */
+	int			status;		/* command status */
+	void			(*done)(struct smu_cmd *cmd, void *misc);
+	void			*misc;
+
+	/* private */
+	struct list_head	link;
+};
+
+/*
+ * Queues an SMU command, all fields have to be initialized
+ */
+extern int smu_queue_cmd(struct smu_cmd *cmd);
+
+/*
+ * Simple command wrapper. This structure embeds a small buffer
+ * to ease sending simple SMU commands from the stack
+ */
+struct smu_simple_cmd
+{
+	struct smu_cmd	cmd;
+	u8	       	buffer[16];
+};
+
+/*
+ * Queues a simple command. All fields will be initialized by that
+ * function
+ */
+extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
+			    unsigned int data_len,
+			    void (*done)(struct smu_cmd *cmd, void *misc),
+			    void *misc,
+			    ...);
+
+/*
+ * Completion helper. Pass it to smu_queue_simple or as 'done'
+ * member to smu_queue_cmd, it will call complete() on the struct
+ * completion passed in the "misc" argument
+ */
+extern void smu_done_complete(struct smu_cmd *cmd, void *misc);
+
+/*
+ * Synchronous helpers. Will spin-wait for completion of a command
+ */
+extern void smu_spinwait_cmd(struct smu_cmd *cmd);
+
+static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd)
+{
+	smu_spinwait_cmd(&scmd->cmd);
+}
+
+/*
+ * Poll routine to call if blocked with irqs off
+ */
+extern void smu_poll(void);
+
+
+/*
+ * Init routine, presence check....
+ */
+extern int smu_init(void);
+extern int smu_present(void);
+struct of_device;
+extern struct of_device *smu_get_ofdev(void);
+
+
+/*
+ * Common command wrappers
+ */
+extern void smu_shutdown(void);
+extern void smu_restart(void);
+struct rtc_time;
+extern int smu_get_rtc_time(struct rtc_time *time, int spinwait);
+extern int smu_set_rtc_time(struct rtc_time *time, int spinwait);
+
+/*
+ * SMU command buffer absolute address, exported by pmac_setup,
+ * this is allocated very early during boot.
+ */
+extern unsigned long smu_cmdbuf_abs;
+
+
+/*
+ * Kenrel asynchronous i2c interface
+ */
+
+#define SMU_I2C_READ_MAX	0x1d
+#define SMU_I2C_WRITE_MAX	0x15
+
+/* SMU i2c header, exactly matches i2c header on wire */
+struct smu_i2c_param
+{
+	u8	bus;		/* SMU bus ID (from device tree) */
+	u8	type;		/* i2c transfer type */
+	u8	devaddr;	/* device address (includes direction) */
+	u8	sublen;		/* subaddress length */
+	u8	subaddr[3];	/* subaddress */
+	u8	caddr;		/* combined address, filled by SMU driver */
+	u8	datalen;	/* length of transfer */
+	u8	data[SMU_I2C_READ_MAX];	/* data */
+};
+
+struct smu_i2c_cmd
+{
+	/* public */
+	struct smu_i2c_param	info;
+	void			(*done)(struct smu_i2c_cmd *cmd, void *misc);
+	void			*misc;
+	int			status; /* 1 = pending, 0 = ok, <0 = fail */
+
+	/* private */
+	struct smu_cmd		scmd;
+	int			read;
+	int			stage;
+	int			retries;
+	u8			pdata[32];
+	struct list_head	link;
+};
+
+/*
+ * Call this to queue an i2c command to the SMU. You must fill info,
+ * including info.data for a write, done and misc.
+ * For now, no polling interface is provided so you have to use completion
+ * callback.
+ */
+extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
+
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * - SMU "sdb" partitions informations -
+ */
+
+
+/*
+ * Partition header format
+ */
+struct smu_sdbp_header {
+	__u8	id;
+	__u8	len;
+	__u8	version;
+	__u8	flags;
+};
+
+
+ /*
+ * demangle 16 and 32 bits integer in some SMU partitions
+ * (currently, afaik, this concerns only the FVT partition
+ * (0x12)
+ */
+#define SMU_U16_MIX(x)	le16_to_cpu(x);
+#define SMU_U32_MIX(x)  ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8))
+
+
+/* This is the definition of the SMU sdb-partition-0x12 table (called
+ * CPU F/V/T operating points in Darwin). The definition for all those
+ * SMU tables should be moved to some separate file
+ */
+#define SMU_SDB_FVT_ID			0x12
+
+struct smu_sdbp_fvt {
+	__u32	sysclk;			/* Base SysClk frequency in Hz for
+					 * this operating point. Value need to
+					 * be unmixed with SMU_U32_MIX()
+					 */
+	__u8	pad;
+	__u8	maxtemp;		/* Max temp. supported by this
+					 * operating point
+					 */
+
+	__u16	volts[3];		/* CPU core voltage for the 3
+					 * PowerTune modes, a mode with
+					 * 0V = not supported. Value need
+					 * to be unmixed with SMU_U16_MIX()
+					 */
+};
+
+/* This partition contains voltage & current sensor calibration
+ * informations
+ */
+#define SMU_SDB_CPUVCP_ID		0x21
+
+struct smu_sdbp_cpuvcp {
+	__u16	volt_scale;		/* u4.12 fixed point */
+	__s16	volt_offset;		/* s4.12 fixed point */
+	__u16	curr_scale;		/* u4.12 fixed point */
+	__s16	curr_offset;		/* s4.12 fixed point */
+	__s32	power_quads[3];		/* s4.28 fixed point */
+};
+
+/* This partition contains CPU thermal diode calibration
+ */
+#define SMU_SDB_CPUDIODE_ID		0x18
+
+struct smu_sdbp_cpudiode {
+	__u16	m_value;		/* u1.15 fixed point */
+	__s16	b_value;		/* s10.6 fixed point */
+
+};
+
+/* This partition contains Slots power calibration
+ */
+#define SMU_SDB_SLOTSPOW_ID		0x78
+
+struct smu_sdbp_slotspow {
+	__u16	pow_scale;		/* u4.12 fixed point */
+	__s16	pow_offset;		/* s4.12 fixed point */
+};
+
+/* This partition contains machine specific version information about
+ * the sensor/control layout
+ */
+#define SMU_SDB_SENSORTREE_ID		0x25
+
+struct smu_sdbp_sensortree {
+	__u8	model_id;
+	__u8	unknown[3];
+};
+
+/* This partition contains CPU thermal control PID informations. So far
+ * only single CPU machines have been seen with an SMU, so we assume this
+ * carries only informations for those
+ */
+#define SMU_SDB_CPUPIDDATA_ID		0x17
+
+struct smu_sdbp_cpupiddata {
+	__u8	unknown1;
+	__u8	target_temp_delta;
+	__u8	unknown2;
+	__u8	history_len;
+	__s16	power_adj;
+	__u16	max_power;
+	__s32	gp,gr,gd;
+};
+
+
+/* Other partitions without known structures */
+#define SMU_SDB_DEBUG_SWITCHES_ID	0x05
+
+#ifdef __KERNEL__
+/*
+ * This returns the pointer to an SMU "sdb" partition data or NULL
+ * if not found. The data format is described below
+ */
+extern const struct smu_sdbp_header *smu_get_sdb_partition(int id,
+					unsigned int *size);
+
+/* Get "sdb" partition data from an SMU satellite */
+extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id,
+					int id, unsigned int *size);
+
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * - Userland interface -
+ */
+
+/*
+ * A given instance of the device can be configured for 2 different
+ * things at the moment:
+ *
+ *  - sending SMU commands (default at open() time)
+ *  - receiving SMU events (not yet implemented)
+ *
+ * Commands are written with write() of a command block. They can be
+ * "driver" commands (for example to switch to event reception mode)
+ * or real SMU commands. They are made of a header followed by command
+ * data if any.
+ *
+ * For SMU commands (not for driver commands), you can then read() back
+ * a reply. The reader will be blocked or not depending on how the device
+ * file is opened. poll() isn't implemented yet. The reply will consist
+ * of a header as well, followed by the reply data if any. You should
+ * always provide a buffer large enough for the maximum reply data, I
+ * recommand one page.
+ *
+ * It is illegal to send SMU commands through a file descriptor configured
+ * for events reception
+ *
+ */
+struct smu_user_cmd_hdr
+{
+	__u32		cmdtype;
+#define SMU_CMDTYPE_SMU			0	/* SMU command */
+#define SMU_CMDTYPE_WANTS_EVENTS	1	/* switch fd to events mode */
+#define SMU_CMDTYPE_GET_PARTITION	2	/* retrieve an sdb partition */
+
+	__u8		cmd;			/* SMU command byte */
+	__u8		pad[3];			/* padding */
+	__u32		data_len;		/* Length of data following */
+};
+
+struct smu_user_reply_hdr
+{
+	__u32		status;			/* Command status */
+	__u32		reply_len;		/* Length of data follwing */
+};
+
+#endif /*  _SMU_H */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
new file mode 100644
index 00000000000..f5a4e168e49
--- /dev/null
+++ b/arch/powerpc/include/asm/socket.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_POWERPC_SOCKET_H
+#define _ASM_POWERPC_SOCKET_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_RCVLOWAT	16
+#define SO_SNDLOWAT	17
+#define SO_RCVTIMEO	18
+#define SO_SNDTIMEO	19
+#define SO_PASSCRED	20
+#define SO_PEERCRED	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/asm/sockios.h b/arch/powerpc/include/asm/sockios.h
new file mode 100644
index 00000000000..55cef7675a3
--- /dev/null
+++ b/arch/powerpc/include/asm/sockios.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SOCKIOS_H
+#define _ASM_POWERPC_SOCKIOS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif	/* _ASM_POWERPC_SOCKIOS_H */
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
new file mode 100644
index 00000000000..54a47ea2c3a
--- /dev/null
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_POWERPC_SPARSEMEM_H
+#define _ASM_POWERPC_SPARSEMEM_H 1
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSADDR_BITS		2^N: how much physical address space we have
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS       24
+
+#define MAX_PHYSADDR_BITS       44
+#define MAX_PHYSMEM_BITS        44
+
+#endif /* CONFIG_SPARSEMEM */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int remove_section_mapping(unsigned long start, unsigned long end);
+#ifdef CONFIG_NUMA
+extern int hot_add_scn_to_nid(unsigned long scn_addr);
+#else
+static inline int hot_add_scn_to_nid(unsigned long scn_addr)
+{
+	return 0;
+}
+#endif /* CONFIG_NUMA */
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
new file mode 100644
index 00000000000..f56a843f470
--- /dev/null
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -0,0 +1,295 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+#ifdef __KERNEL__
+
+/*
+ * Simple spin lock operations.  
+ *
+ * Copyright (C) 2001-2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright (C) 2002 Dave Engebretsen <engebret@us.ibm.com>, IBM
+ *	Rework to support virtual processors
+ *
+ * Type of int is used as a full 64b word is not necessary.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+#include <linux/irqflags.h>
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#include <asm/hvcall.h>
+#include <asm/iseries/hv_call.h>
+#endif
+#include <asm/asm-compat.h>
+#include <asm/synch.h>
+
+#define __raw_spin_is_locked(x)		((x)->slock != 0)
+
+#ifdef CONFIG_PPC64
+/* use 0x800000yy when locked, where yy == CPU number */
+#define LOCK_TOKEN	(*(u32 *)(&get_paca()->lock_token))
+#else
+#define LOCK_TOKEN	1
+#endif
+
+#if defined(CONFIG_PPC64) && defined(CONFIG_SMP)
+#define CLEAR_IO_SYNC	(get_paca()->io_sync = 0)
+#define SYNC_IO		do {						\
+				if (unlikely(get_paca()->io_sync)) {	\
+					mb();				\
+					get_paca()->io_sync = 0;	\
+				}					\
+			} while (0)
+#else
+#define CLEAR_IO_SYNC
+#define SYNC_IO
+#endif
+
+/*
+ * This returns the old value in the lock, so we succeeded
+ * in getting the lock if the return value is 0.
+ */
+static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long tmp, token;
+
+	token = LOCK_TOKEN;
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%2\n\
+	cmpwi		0,%0,0\n\
+	bne-		2f\n\
+	stwcx.		%1,0,%2\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (token), "r" (&lock->slock)
+	: "cr0", "memory");
+
+	return tmp;
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	CLEAR_IO_SYNC;
+	return __spin_trylock(lock) == 0;
+}
+
+/*
+ * On a system with shared processors (that is, where a physical
+ * processor is multiplexed between several virtual processors),
+ * there is no point spinning on a lock if the holder of the lock
+ * isn't currently scheduled on a physical processor.  Instead
+ * we detect this situation and ask the hypervisor to give the
+ * rest of our timeslice to the lock holder.
+ *
+ * So that we can tell which virtual processor is holding a lock,
+ * we put 0x80000000 | smp_processor_id() in the lock when it is
+ * held.  Conveniently, we have a word in the paca that holds this
+ * value.
+ */
+
+#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
+/* We only yield to the hypervisor if we are in shared processor mode */
+#define SHARED_PROCESSOR (get_lppaca()->shared_proc)
+extern void __spin_yield(raw_spinlock_t *lock);
+extern void __rw_yield(raw_rwlock_t *lock);
+#else /* SPLPAR || ISERIES */
+#define __spin_yield(x)	barrier()
+#define __rw_yield(x)	barrier()
+#define SHARED_PROCESSOR	0
+#endif
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	CLEAR_IO_SYNC;
+	while (1) {
+		if (likely(__spin_trylock(lock) == 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__spin_yield(lock);
+		} while (unlikely(lock->slock != 0));
+		HMT_medium();
+	}
+}
+
+static inline
+void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
+{
+	unsigned long flags_dis;
+
+	CLEAR_IO_SYNC;
+	while (1) {
+		if (likely(__spin_trylock(lock) == 0))
+			break;
+		local_save_flags(flags_dis);
+		local_irq_restore(flags);
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__spin_yield(lock);
+		} while (unlikely(lock->slock != 0));
+		HMT_medium();
+		local_irq_restore(flags_dis);
+	}
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	SYNC_IO;
+	__asm__ __volatile__("# __raw_spin_unlock\n\t"
+				LWSYNC_ON_SMP: : :"memory");
+	lock->slock = 0;
+}
+
+#ifdef CONFIG_PPC64
+extern void __raw_spin_unlock_wait(raw_spinlock_t *lock);
+#else
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+#endif
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+#define __raw_read_can_lock(rw)		((rw)->lock >= 0)
+#define __raw_write_can_lock(rw)	(!(rw)->lock)
+
+#ifdef CONFIG_PPC64
+#define __DO_SIGN_EXTEND	"extsw	%0,%0\n"
+#define WRLOCK_TOKEN		LOCK_TOKEN	/* it's negative */
+#else
+#define __DO_SIGN_EXTEND
+#define WRLOCK_TOKEN		(-1)
+#endif
+
+/*
+ * This returns the old value in the lock + 1,
+ * so we got a read lock if the return value is > 0.
+ */
+static inline long __read_trylock(raw_rwlock_t *rw)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%1\n"
+	__DO_SIGN_EXTEND
+"	addic.		%0,%0,1\n\
+	ble-		2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%0,0,%1\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (&rw->lock)
+	: "cr0", "xer", "memory");
+
+	return tmp;
+}
+
+/*
+ * This returns the old value in the lock,
+ * so we got the write lock if the return value is 0.
+ */
+static inline long __write_trylock(raw_rwlock_t *rw)
+{
+	long tmp, token;
+
+	token = WRLOCK_TOKEN;
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%2\n\
+	cmpwi		0,%0,0\n\
+	bne-		2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%1,0,%2\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (token), "r" (&rw->lock)
+	: "cr0", "memory");
+
+	return tmp;
+}
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	while (1) {
+		if (likely(__read_trylock(rw) > 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__rw_yield(rw);
+		} while (unlikely(rw->lock < 0));
+		HMT_medium();
+	}
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	while (1) {
+		if (likely(__write_trylock(rw) == 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__rw_yield(rw);
+		} while (unlikely(rw->lock != 0));
+		HMT_medium();
+	}
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	return __read_trylock(rw) > 0;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	return __write_trylock(rw) == 0;
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+	"# read_unlock\n\t"
+	LWSYNC_ON_SMP
+"1:	lwarx		%0,0,%1\n\
+	addic		%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%0,0,%1\n\
+	bne-		1b"
+	: "=&r"(tmp)
+	: "r"(&rw->lock)
+	: "cr0", "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	__asm__ __volatile__("# write_unlock\n\t"
+				LWSYNC_ON_SMP: : :"memory");
+	rw->lock = 0;
+}
+
+#define _raw_spin_relax(lock)	__spin_yield(lock)
+#define _raw_read_relax(lock)	__rw_yield(lock)
+#define _raw_write_relax(lock)	__rw_yield(lock)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/powerpc/include/asm/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..74236c9f05b
--- /dev/null
+++ b/arch/powerpc/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H
+#define _ASM_POWERPC_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int slock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile signed int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
new file mode 100644
index 00000000000..8b2eb044270
--- /dev/null
+++ b/arch/powerpc/include/asm/spu.h
@@ -0,0 +1,732 @@
+/*
+ * SPU core / file system interface and HW structures
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_H
+#define _SPU_H
+#ifdef __KERNEL__
+
+#include <linux/workqueue.h>
+#include <linux/sysdev.h>
+
+#define LS_SIZE (256 * 1024)
+#define LS_ADDR_MASK (LS_SIZE - 1)
+
+#define MFC_PUT_CMD             0x20
+#define MFC_PUTS_CMD            0x28
+#define MFC_PUTR_CMD            0x30
+#define MFC_PUTF_CMD            0x22
+#define MFC_PUTB_CMD            0x21
+#define MFC_PUTFS_CMD           0x2A
+#define MFC_PUTBS_CMD           0x29
+#define MFC_PUTRF_CMD           0x32
+#define MFC_PUTRB_CMD           0x31
+#define MFC_PUTL_CMD            0x24
+#define MFC_PUTRL_CMD           0x34
+#define MFC_PUTLF_CMD           0x26
+#define MFC_PUTLB_CMD           0x25
+#define MFC_PUTRLF_CMD          0x36
+#define MFC_PUTRLB_CMD          0x35
+
+#define MFC_GET_CMD             0x40
+#define MFC_GETS_CMD            0x48
+#define MFC_GETF_CMD            0x42
+#define MFC_GETB_CMD            0x41
+#define MFC_GETFS_CMD           0x4A
+#define MFC_GETBS_CMD           0x49
+#define MFC_GETL_CMD            0x44
+#define MFC_GETLF_CMD           0x46
+#define MFC_GETLB_CMD           0x45
+
+#define MFC_SDCRT_CMD           0x80
+#define MFC_SDCRTST_CMD         0x81
+#define MFC_SDCRZ_CMD           0x89
+#define MFC_SDCRS_CMD           0x8D
+#define MFC_SDCRF_CMD           0x8F
+
+#define MFC_GETLLAR_CMD         0xD0
+#define MFC_PUTLLC_CMD          0xB4
+#define MFC_PUTLLUC_CMD         0xB0
+#define MFC_PUTQLLUC_CMD        0xB8
+#define MFC_SNDSIG_CMD          0xA0
+#define MFC_SNDSIGB_CMD         0xA1
+#define MFC_SNDSIGF_CMD         0xA2
+#define MFC_BARRIER_CMD         0xC0
+#define MFC_EIEIO_CMD           0xC8
+#define MFC_SYNC_CMD            0xCC
+
+#define MFC_MIN_DMA_SIZE_SHIFT  4       /* 16 bytes */
+#define MFC_MAX_DMA_SIZE_SHIFT  14      /* 16384 bytes */
+#define MFC_MIN_DMA_SIZE        (1 << MFC_MIN_DMA_SIZE_SHIFT)
+#define MFC_MAX_DMA_SIZE        (1 << MFC_MAX_DMA_SIZE_SHIFT)
+#define MFC_MIN_DMA_SIZE_MASK   (MFC_MIN_DMA_SIZE - 1)
+#define MFC_MAX_DMA_SIZE_MASK   (MFC_MAX_DMA_SIZE - 1)
+#define MFC_MIN_DMA_LIST_SIZE   0x0008  /*   8 bytes */
+#define MFC_MAX_DMA_LIST_SIZE   0x4000  /* 16K bytes */
+
+#define MFC_TAGID_TO_TAGMASK(tag_id)  (1 << (tag_id & 0x1F))
+
+/* Events for Channels 0-2 */
+#define MFC_DMA_TAG_STATUS_UPDATE_EVENT     0x00000001
+#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT  0x00000002
+#define MFC_DMA_QUEUE_AVAILABLE_EVENT       0x00000008
+#define MFC_SPU_MAILBOX_WRITTEN_EVENT       0x00000010
+#define MFC_DECREMENTER_EVENT               0x00000020
+#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT  0x00000040
+#define MFC_PU_MAILBOX_AVAILABLE_EVENT      0x00000080
+#define MFC_SIGNAL_2_EVENT                  0x00000100
+#define MFC_SIGNAL_1_EVENT                  0x00000200
+#define MFC_LLR_LOST_EVENT                  0x00000400
+#define MFC_PRIV_ATTN_EVENT                 0x00000800
+#define MFC_MULTI_SRC_EVENT                 0x00001000
+
+/* Flag indicating progress during context switch. */
+#define SPU_CONTEXT_SWITCH_PENDING	0UL
+#define SPU_CONTEXT_FAULT_PENDING	1UL
+
+struct spu_context;
+struct spu_runqueue;
+struct spu_lscsa;
+struct device_node;
+
+enum spu_utilization_state {
+	SPU_UTIL_USER,
+	SPU_UTIL_SYSTEM,
+	SPU_UTIL_IOWAIT,
+	SPU_UTIL_IDLE_LOADED,
+	SPU_UTIL_MAX
+};
+
+struct spu {
+	const char *name;
+	unsigned long local_store_phys;
+	u8 *local_store;
+	unsigned long problem_phys;
+	struct spu_problem __iomem *problem;
+	struct spu_priv2 __iomem *priv2;
+	struct list_head cbe_list;
+	struct list_head full_list;
+	enum { SPU_FREE, SPU_USED } alloc_state;
+	int number;
+	unsigned int irqs[3];
+	u32 node;
+	u64 flags;
+	u64 class_0_pending;
+	u64 class_0_dar;
+	u64 class_1_dar;
+	u64 class_1_dsisr;
+	size_t ls_size;
+	unsigned int slb_replace;
+	struct mm_struct *mm;
+	struct spu_context *ctx;
+	struct spu_runqueue *rq;
+	unsigned long long timestamp;
+	pid_t pid;
+	pid_t tgid;
+	spinlock_t register_lock;
+
+	void (* wbox_callback)(struct spu *spu);
+	void (* ibox_callback)(struct spu *spu);
+	void (* stop_callback)(struct spu *spu, int irq);
+	void (* mfc_callback)(struct spu *spu);
+
+	char irq_c0[8];
+	char irq_c1[8];
+	char irq_c2[8];
+
+	u64 spe_id;
+
+	void* pdata; /* platform private data */
+
+	/* of based platforms only */
+	struct device_node *devnode;
+
+	/* native only */
+	struct spu_priv1 __iomem *priv1;
+
+	/* beat only */
+	u64 shadow_int_mask_RW[3];
+
+	struct sys_device sysdev;
+
+	int has_mem_affinity;
+	struct list_head aff_list;
+
+	struct {
+		/* protected by interrupt reentrancy */
+		enum spu_utilization_state util_state;
+		unsigned long long tstamp;
+		unsigned long long times[SPU_UTIL_MAX];
+		unsigned long long vol_ctx_switch;
+		unsigned long long invol_ctx_switch;
+		unsigned long long min_flt;
+		unsigned long long maj_flt;
+		unsigned long long hash_flt;
+		unsigned long long slb_flt;
+		unsigned long long class2_intr;
+		unsigned long long libassist;
+	} stats;
+};
+
+struct cbe_spu_info {
+	struct mutex list_mutex;
+	struct list_head spus;
+	int n_spus;
+	int nr_active;
+	atomic_t busy_spus;
+	atomic_t reserved_spus;
+};
+
+extern struct cbe_spu_info cbe_spu_info[];
+
+void spu_init_channels(struct spu *spu);
+void spu_irq_setaffinity(struct spu *spu, int cpu);
+
+void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
+		void *code, int code_size);
+
+#ifdef CONFIG_KEXEC
+void crash_register_spus(struct list_head *list);
+#else
+static inline void crash_register_spus(struct list_head *list)
+{
+}
+#endif
+
+extern void spu_invalidate_slbs(struct spu *spu);
+extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm);
+int spu_64k_pages_available(void);
+
+/* Calls from the memory management to the SPU */
+struct mm_struct;
+extern void spu_flush_all_slbs(struct mm_struct *mm);
+
+/* This interface allows a profiler (e.g., OProfile) to store a ref
+ * to spu context information that it creates.	This caching technique
+ * avoids the need to recreate this information after a save/restore operation.
+ *
+ * Assumes the caller has already incremented the ref count to
+ * profile_info; then spu_context_destroy must call kref_put
+ * on prof_info_kref.
+ */
+void spu_set_profile_private_kref(struct spu_context *ctx,
+				  struct kref *prof_info_kref,
+				  void ( * prof_info_release) (struct kref *kref));
+
+void *spu_get_profile_private_kref(struct spu_context *ctx);
+
+/* system callbacks from the SPU */
+struct spu_syscall_block {
+	u64 nr_ret;
+	u64 parm[6];
+};
+extern long spu_sys_callback(struct spu_syscall_block *s);
+
+/* syscalls implemented in spufs */
+struct file;
+struct spufs_calls {
+	long (*create_thread)(const char __user *name,
+					unsigned int flags, mode_t mode,
+					struct file *neighbor);
+	long (*spu_run)(struct file *filp, __u32 __user *unpc,
+						__u32 __user *ustatus);
+	int (*coredump_extra_notes_size)(void);
+	int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset);
+	void (*notify_spus_active)(void);
+	struct module *owner;
+};
+
+/* return status from spu_run, same as in libspe */
+#define SPE_EVENT_DMA_ALIGNMENT		0x0008	/*A DMA alignment error */
+#define SPE_EVENT_SPE_ERROR		0x0010	/*An illegal instruction error*/
+#define SPE_EVENT_SPE_DATA_SEGMENT	0x0020	/*A DMA segmentation error    */
+#define SPE_EVENT_SPE_DATA_STORAGE	0x0040	/*A DMA storage error */
+#define SPE_EVENT_INVALID_DMA		0x0800	/* Invalid MFC DMA */
+
+/*
+ * Flags for sys_spu_create.
+ */
+#define SPU_CREATE_EVENTS_ENABLED	0x0001
+#define SPU_CREATE_GANG			0x0002
+#define SPU_CREATE_NOSCHED		0x0004
+#define SPU_CREATE_ISOLATE		0x0008
+#define SPU_CREATE_AFFINITY_SPU		0x0010
+#define SPU_CREATE_AFFINITY_MEM		0x0020
+
+#define SPU_CREATE_FLAG_ALL		0x003f /* mask of all valid flags */
+
+
+int register_spu_syscalls(struct spufs_calls *calls);
+void unregister_spu_syscalls(struct spufs_calls *calls);
+
+int spu_add_sysdev_attr(struct sysdev_attribute *attr);
+void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
+
+int spu_add_sysdev_attr_group(struct attribute_group *attrs);
+void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
+
+int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
+		unsigned long dsisr, unsigned *flt);
+
+/*
+ * Notifier blocks:
+ *
+ * oprofile can get notified when a context switch is performed
+ * on an spe. The notifer function that gets called is passed
+ * a pointer to the SPU structure as well as the object-id that
+ * identifies the binary running on that SPU now.
+ *
+ * For a context save, the object-id that is passed is zero,
+ * identifying that the kernel will run from that moment on.
+ *
+ * For a context restore, the object-id is the value written
+ * to object-id spufs file from user space and the notifer
+ * function can assume that spu->ctx is valid.
+ */
+struct notifier_block;
+int spu_switch_event_register(struct notifier_block * n);
+int spu_switch_event_unregister(struct notifier_block * n);
+
+extern void notify_spus_active(void);
+extern void do_notify_spus_active(void);
+
+/*
+ * This defines the Local Store, Problem Area and Privilege Area of an SPU.
+ */
+
+union mfc_tag_size_class_cmd {
+	struct {
+		u16 mfc_size;
+		u16 mfc_tag;
+		u8  pad;
+		u8  mfc_rclassid;
+		u16 mfc_cmd;
+	} u;
+	struct {
+		u32 mfc_size_tag32;
+		u32 mfc_class_cmd32;
+	} by32;
+	u64 all64;
+};
+
+struct mfc_cq_sr {
+	u64 mfc_cq_data0_RW;
+	u64 mfc_cq_data1_RW;
+	u64 mfc_cq_data2_RW;
+	u64 mfc_cq_data3_RW;
+};
+
+struct spu_problem {
+#define MS_SYNC_PENDING         1L
+	u64 spc_mssync_RW;					/* 0x0000 */
+	u8  pad_0x0008_0x3000[0x3000 - 0x0008];
+
+	/* DMA Area */
+	u8  pad_0x3000_0x3004[0x4];				/* 0x3000 */
+	u32 mfc_lsa_W;						/* 0x3004 */
+	u64 mfc_ea_W;						/* 0x3008 */
+	union mfc_tag_size_class_cmd mfc_union_W;			/* 0x3010 */
+	u8  pad_0x3018_0x3104[0xec];				/* 0x3018 */
+	u32 dma_qstatus_R;					/* 0x3104 */
+	u8  pad_0x3108_0x3204[0xfc];				/* 0x3108 */
+	u32 dma_querytype_RW;					/* 0x3204 */
+	u8  pad_0x3208_0x321c[0x14];				/* 0x3208 */
+	u32 dma_querymask_RW;					/* 0x321c */
+	u8  pad_0x3220_0x322c[0xc];				/* 0x3220 */
+	u32 dma_tagstatus_R;					/* 0x322c */
+#define DMA_TAGSTATUS_INTR_ANY	1u
+#define DMA_TAGSTATUS_INTR_ALL	2u
+	u8  pad_0x3230_0x4000[0x4000 - 0x3230]; 		/* 0x3230 */
+
+	/* SPU Control Area */
+	u8  pad_0x4000_0x4004[0x4];				/* 0x4000 */
+	u32 pu_mb_R;						/* 0x4004 */
+	u8  pad_0x4008_0x400c[0x4];				/* 0x4008 */
+	u32 spu_mb_W;						/* 0x400c */
+	u8  pad_0x4010_0x4014[0x4];				/* 0x4010 */
+	u32 mb_stat_R;						/* 0x4014 */
+	u8  pad_0x4018_0x401c[0x4];				/* 0x4018 */
+	u32 spu_runcntl_RW;					/* 0x401c */
+#define SPU_RUNCNTL_STOP	0L
+#define SPU_RUNCNTL_RUNNABLE	1L
+#define SPU_RUNCNTL_ISOLATE	2L
+	u8  pad_0x4020_0x4024[0x4];				/* 0x4020 */
+	u32 spu_status_R;					/* 0x4024 */
+#define SPU_STOP_STATUS_SHIFT           16
+#define SPU_STATUS_STOPPED		0x0
+#define SPU_STATUS_RUNNING		0x1
+#define SPU_STATUS_STOPPED_BY_STOP	0x2
+#define SPU_STATUS_STOPPED_BY_HALT	0x4
+#define SPU_STATUS_WAITING_FOR_CHANNEL	0x8
+#define SPU_STATUS_SINGLE_STEP		0x10
+#define SPU_STATUS_INVALID_INSTR        0x20
+#define SPU_STATUS_INVALID_CH           0x40
+#define SPU_STATUS_ISOLATED_STATE       0x80
+#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200
+#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400
+	u8  pad_0x4028_0x402c[0x4];				/* 0x4028 */
+	u32 spu_spe_R;						/* 0x402c */
+	u8  pad_0x4030_0x4034[0x4];				/* 0x4030 */
+	u32 spu_npc_RW;						/* 0x4034 */
+	u8  pad_0x4038_0x14000[0x14000 - 0x4038];		/* 0x4038 */
+
+	/* Signal Notification Area */
+	u8  pad_0x14000_0x1400c[0xc];				/* 0x14000 */
+	u32 signal_notify1;					/* 0x1400c */
+	u8  pad_0x14010_0x1c00c[0x7ffc];			/* 0x14010 */
+	u32 signal_notify2;					/* 0x1c00c */
+} __attribute__ ((aligned(0x20000)));
+
+/* SPU Privilege 2 State Area */
+struct spu_priv2 {
+	/* MFC Registers */
+	u8  pad_0x0000_0x1100[0x1100 - 0x0000]; 		/* 0x0000 */
+
+	/* SLB Management Registers */
+	u8  pad_0x1100_0x1108[0x8];				/* 0x1100 */
+	u64 slb_index_W;					/* 0x1108 */
+#define SLB_INDEX_MASK				0x7L
+	u64 slb_esid_RW;					/* 0x1110 */
+	u64 slb_vsid_RW;					/* 0x1118 */
+#define SLB_VSID_SUPERVISOR_STATE	(0x1ull << 11)
+#define SLB_VSID_SUPERVISOR_STATE_MASK	(0x1ull << 11)
+#define SLB_VSID_PROBLEM_STATE		(0x1ull << 10)
+#define SLB_VSID_PROBLEM_STATE_MASK	(0x1ull << 10)
+#define SLB_VSID_EXECUTE_SEGMENT	(0x1ull << 9)
+#define SLB_VSID_NO_EXECUTE_SEGMENT	(0x1ull << 9)
+#define SLB_VSID_EXECUTE_SEGMENT_MASK	(0x1ull << 9)
+#define SLB_VSID_4K_PAGE		(0x0 << 8)
+#define SLB_VSID_LARGE_PAGE		(0x1ull << 8)
+#define SLB_VSID_PAGE_SIZE_MASK		(0x1ull << 8)
+#define SLB_VSID_CLASS_MASK		(0x1ull << 7)
+#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK	(0x1ull << 6)
+	u64 slb_invalidate_entry_W;				/* 0x1120 */
+	u64 slb_invalidate_all_W;				/* 0x1128 */
+	u8  pad_0x1130_0x2000[0x2000 - 0x1130]; 		/* 0x1130 */
+
+	/* Context Save / Restore Area */
+	struct mfc_cq_sr spuq[16];				/* 0x2000 */
+	struct mfc_cq_sr puq[8];				/* 0x2200 */
+	u8  pad_0x2300_0x3000[0x3000 - 0x2300]; 		/* 0x2300 */
+
+	/* MFC Control */
+	u64 mfc_control_RW;					/* 0x3000 */
+#define MFC_CNTL_RESUME_DMA_QUEUE		(0ull << 0)
+#define MFC_CNTL_SUSPEND_DMA_QUEUE		(1ull << 0)
+#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK		(1ull << 0)
+#define MFC_CNTL_SUSPEND_MASK			(1ull << 4)
+#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION	(0ull << 8)
+#define MFC_CNTL_SUSPEND_IN_PROGRESS		(1ull << 8)
+#define MFC_CNTL_SUSPEND_COMPLETE		(3ull << 8)
+#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK	(3ull << 8)
+#define MFC_CNTL_DMA_QUEUES_EMPTY		(1ull << 14)
+#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK		(1ull << 14)
+#define MFC_CNTL_PURGE_DMA_REQUEST		(1ull << 15)
+#define MFC_CNTL_PURGE_DMA_IN_PROGRESS		(1ull << 24)
+#define MFC_CNTL_PURGE_DMA_COMPLETE		(3ull << 24)
+#define MFC_CNTL_PURGE_DMA_STATUS_MASK		(3ull << 24)
+#define MFC_CNTL_RESTART_DMA_COMMAND		(1ull << 32)
+#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING	(1ull << 32)
+#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32)
+#define MFC_CNTL_MFC_PRIVILEGE_STATE		(2ull << 33)
+#define MFC_CNTL_MFC_PROBLEM_STATE		(3ull << 33)
+#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK	(3ull << 33)
+#define MFC_CNTL_DECREMENTER_HALTED		(1ull << 35)
+#define MFC_CNTL_DECREMENTER_RUNNING		(1ull << 40)
+#define MFC_CNTL_DECREMENTER_STATUS_MASK	(1ull << 40)
+	u8  pad_0x3008_0x4000[0x4000 - 0x3008]; 		/* 0x3008 */
+
+	/* Interrupt Mailbox */
+	u64 puint_mb_R;						/* 0x4000 */
+	u8  pad_0x4008_0x4040[0x4040 - 0x4008]; 		/* 0x4008 */
+
+	/* SPU Control */
+	u64 spu_privcntl_RW;					/* 0x4040 */
+#define SPU_PRIVCNTL_MODE_NORMAL		(0x0ull << 0)
+#define SPU_PRIVCNTL_MODE_SINGLE_STEP		(0x1ull << 0)
+#define SPU_PRIVCNTL_MODE_MASK			(0x1ull << 0)
+#define SPU_PRIVCNTL_NO_ATTENTION_EVENT		(0x0ull << 1)
+#define SPU_PRIVCNTL_ATTENTION_EVENT		(0x1ull << 1)
+#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK	(0x1ull << 1)
+#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL		(0x0ull << 2)
+#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK	(0x1ull << 2)
+	u8  pad_0x4048_0x4058[0x10];				/* 0x4048 */
+	u64 spu_lslr_RW;					/* 0x4058 */
+	u64 spu_chnlcntptr_RW;					/* 0x4060 */
+	u64 spu_chnlcnt_RW;					/* 0x4068 */
+	u64 spu_chnldata_RW;					/* 0x4070 */
+	u64 spu_cfg_RW;						/* 0x4078 */
+	u8  pad_0x4080_0x5000[0x5000 - 0x4080]; 		/* 0x4080 */
+
+	/* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */
+	u64 spu_pm_trace_tag_status_RW;				/* 0x5000 */
+	u64 spu_tag_status_query_RW;				/* 0x5008 */
+#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32)
+#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull)
+	u64 spu_cmd_buf1_RW;					/* 0x5010 */
+#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32)
+#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull)
+	u64 spu_cmd_buf2_RW;					/* 0x5018 */
+#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32)
+#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16)
+#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full)
+	u64 spu_atomic_status_RW;				/* 0x5020 */
+} __attribute__ ((aligned(0x20000)));
+
+/* SPU Privilege 1 State Area */
+struct spu_priv1 {
+	/* Control and Configuration Area */
+	u64 mfc_sr1_RW;						/* 0x000 */
+#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK	0x01ull
+#define MFC_STATE1_BUS_TLBIE_MASK		0x02ull
+#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK	0x04ull
+#define MFC_STATE1_PROBLEM_STATE_MASK		0x08ull
+#define MFC_STATE1_RELOCATE_MASK		0x10ull
+#define MFC_STATE1_MASTER_RUN_CONTROL_MASK	0x20ull
+#define MFC_STATE1_TABLE_SEARCH_MASK		0x40ull
+	u64 mfc_lpid_RW;					/* 0x008 */
+	u64 spu_idr_RW;						/* 0x010 */
+	u64 mfc_vr_RO;						/* 0x018 */
+#define MFC_VERSION_BITS		(0xffff << 16)
+#define MFC_REVISION_BITS		(0xffff)
+#define MFC_GET_VERSION_BITS(vr)	(((vr) & MFC_VERSION_BITS) >> 16)
+#define MFC_GET_REVISION_BITS(vr)	((vr) & MFC_REVISION_BITS)
+	u64 spu_vr_RO;						/* 0x020 */
+#define SPU_VERSION_BITS		(0xffff << 16)
+#define SPU_REVISION_BITS		(0xffff)
+#define SPU_GET_VERSION_BITS(vr)	(vr & SPU_VERSION_BITS) >> 16
+#define SPU_GET_REVISION_BITS(vr)	(vr & SPU_REVISION_BITS)
+	u8  pad_0x28_0x100[0x100 - 0x28];			/* 0x28 */
+
+	/* Interrupt Area */
+	u64 int_mask_RW[3];					/* 0x100 */
+#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR		0x1L
+#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR		0x2L
+#define CLASS0_ENABLE_SPU_ERROR_INTR			0x4L
+#define CLASS0_ENABLE_MFC_FIR_INTR			0x8L
+#define CLASS1_ENABLE_SEGMENT_FAULT_INTR		0x1L
+#define CLASS1_ENABLE_STORAGE_FAULT_INTR		0x2L
+#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR	0x4L
+#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR	0x8L
+#define CLASS2_ENABLE_MAILBOX_INTR			0x1L
+#define CLASS2_ENABLE_SPU_STOP_INTR			0x2L
+#define CLASS2_ENABLE_SPU_HALT_INTR			0x4L
+#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR	0x8L
+#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR		0x10L
+	u8  pad_0x118_0x140[0x28];				/* 0x118 */
+	u64 int_stat_RW[3];					/* 0x140 */
+#define CLASS0_DMA_ALIGNMENT_INTR			0x1L
+#define CLASS0_INVALID_DMA_COMMAND_INTR			0x2L
+#define CLASS0_SPU_ERROR_INTR				0x4L
+#define CLASS0_INTR_MASK				0x7L
+#define CLASS1_SEGMENT_FAULT_INTR			0x1L
+#define CLASS1_STORAGE_FAULT_INTR			0x2L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR		0x4L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR		0x8L
+#define CLASS1_INTR_MASK				0xfL
+#define CLASS2_MAILBOX_INTR				0x1L
+#define CLASS2_SPU_STOP_INTR				0x2L
+#define CLASS2_SPU_HALT_INTR				0x4L
+#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR		0x8L
+#define CLASS2_MAILBOX_THRESHOLD_INTR			0x10L
+#define CLASS2_INTR_MASK				0x1fL
+	u8  pad_0x158_0x180[0x28];				/* 0x158 */
+	u64 int_route_RW;					/* 0x180 */
+
+	/* Interrupt Routing */
+	u8  pad_0x188_0x200[0x200 - 0x188];			/* 0x188 */
+
+	/* Atomic Unit Control Area */
+	u64 mfc_atomic_flush_RW;				/* 0x200 */
+#define mfc_atomic_flush_enable			0x1L
+	u8  pad_0x208_0x280[0x78];				/* 0x208 */
+	u64 resource_allocation_groupID_RW;			/* 0x280 */
+	u64 resource_allocation_enable_RW; 			/* 0x288 */
+	u8  pad_0x290_0x3c8[0x3c8 - 0x290];			/* 0x290 */
+
+	/* SPU_Cache_ImplRegs: Implementation-dependent cache registers */
+
+	u64 smf_sbi_signal_sel;					/* 0x3c8 */
+#define smf_sbi_mask_lsb	56
+#define smf_sbi_shift		(63 - smf_sbi_mask_lsb)
+#define smf_sbi_mask		(0x301LL << smf_sbi_shift)
+#define smf_sbi_bus0_bits	(0x001LL << smf_sbi_shift)
+#define smf_sbi_bus2_bits	(0x100LL << smf_sbi_shift)
+#define smf_sbi2_bus0_bits	(0x201LL << smf_sbi_shift)
+#define smf_sbi2_bus2_bits	(0x300LL << smf_sbi_shift)
+	u64 smf_ato_signal_sel;					/* 0x3d0 */
+#define smf_ato_mask_lsb	35
+#define smf_ato_shift		(63 - smf_ato_mask_lsb)
+#define smf_ato_mask		(0x3LL << smf_ato_shift)
+#define smf_ato_bus0_bits	(0x2LL << smf_ato_shift)
+#define smf_ato_bus2_bits	(0x1LL << smf_ato_shift)
+	u8  pad_0x3d8_0x400[0x400 - 0x3d8];			/* 0x3d8 */
+
+	/* TLB Management Registers */
+	u64 mfc_sdr_RW;						/* 0x400 */
+	u8  pad_0x408_0x500[0xf8];				/* 0x408 */
+	u64 tlb_index_hint_RO;					/* 0x500 */
+	u64 tlb_index_W;					/* 0x508 */
+	u64 tlb_vpn_RW;						/* 0x510 */
+	u64 tlb_rpn_RW;						/* 0x518 */
+	u8  pad_0x520_0x540[0x20];				/* 0x520 */
+	u64 tlb_invalidate_entry_W;				/* 0x540 */
+	u64 tlb_invalidate_all_W;				/* 0x548 */
+	u8  pad_0x550_0x580[0x580 - 0x550];			/* 0x550 */
+
+	/* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */
+	u64 smm_hid;						/* 0x580 */
+#define PAGE_SIZE_MASK		0xf000000000000000ull
+#define PAGE_SIZE_16MB_64KB	0x2000000000000000ull
+	u8  pad_0x588_0x600[0x600 - 0x588];			/* 0x588 */
+
+	/* MFC Status/Control Area */
+	u64 mfc_accr_RW;					/* 0x600 */
+#define MFC_ACCR_EA_ACCESS_GET		(1 << 0)
+#define MFC_ACCR_EA_ACCESS_PUT		(1 << 1)
+#define MFC_ACCR_LS_ACCESS_GET		(1 << 3)
+#define MFC_ACCR_LS_ACCESS_PUT		(1 << 4)
+	u8  pad_0x608_0x610[0x8];				/* 0x608 */
+	u64 mfc_dsisr_RW;					/* 0x610 */
+#define MFC_DSISR_PTE_NOT_FOUND		(1 << 30)
+#define MFC_DSISR_ACCESS_DENIED		(1 << 27)
+#define MFC_DSISR_ATOMIC		(1 << 26)
+#define MFC_DSISR_ACCESS_PUT		(1 << 25)
+#define MFC_DSISR_ADDR_MATCH		(1 << 22)
+#define MFC_DSISR_LS			(1 << 17)
+#define MFC_DSISR_L			(1 << 16)
+#define MFC_DSISR_ADDRESS_OVERFLOW	(1 << 0)
+	u8  pad_0x618_0x620[0x8];				/* 0x618 */
+	u64 mfc_dar_RW;						/* 0x620 */
+	u8  pad_0x628_0x700[0x700 - 0x628];			/* 0x628 */
+
+	/* Replacement Management Table (RMT) Area */
+	u64 rmt_index_RW;					/* 0x700 */
+	u8  pad_0x708_0x710[0x8];				/* 0x708 */
+	u64 rmt_data1_RW;					/* 0x710 */
+	u8  pad_0x718_0x800[0x800 - 0x718];			/* 0x718 */
+
+	/* Control/Configuration Registers */
+	u64 mfc_dsir_R;						/* 0x800 */
+#define MFC_DSIR_Q			(1 << 31)
+#define MFC_DSIR_SPU_QUEUE		MFC_DSIR_Q
+	u64 mfc_lsacr_RW;					/* 0x808 */
+#define MFC_LSACR_COMPARE_MASK		((~0ull) << 32)
+#define MFC_LSACR_COMPARE_ADDR		((~0ull) >> 32)
+	u64 mfc_lscrr_R;					/* 0x810 */
+#define MFC_LSCRR_Q			(1 << 31)
+#define MFC_LSCRR_SPU_QUEUE		MFC_LSCRR_Q
+#define MFC_LSCRR_QI_SHIFT		32
+#define MFC_LSCRR_QI_MASK		((~0ull) << MFC_LSCRR_QI_SHIFT)
+	u8  pad_0x818_0x820[0x8];				/* 0x818 */
+	u64 mfc_tclass_id_RW;					/* 0x820 */
+#define MFC_TCLASS_ID_ENABLE		(1L << 0L)
+#define MFC_TCLASS_SLOT2_ENABLE		(1L << 5L)
+#define MFC_TCLASS_SLOT1_ENABLE		(1L << 6L)
+#define MFC_TCLASS_SLOT0_ENABLE		(1L << 7L)
+#define MFC_TCLASS_QUOTA_2_SHIFT	8L
+#define MFC_TCLASS_QUOTA_1_SHIFT	16L
+#define MFC_TCLASS_QUOTA_0_SHIFT	24L
+#define MFC_TCLASS_QUOTA_2_MASK		(0x1FL << MFC_TCLASS_QUOTA_2_SHIFT)
+#define MFC_TCLASS_QUOTA_1_MASK		(0x1FL << MFC_TCLASS_QUOTA_1_SHIFT)
+#define MFC_TCLASS_QUOTA_0_MASK		(0x1FL << MFC_TCLASS_QUOTA_0_SHIFT)
+	u8  pad_0x828_0x900[0x900 - 0x828];			/* 0x828 */
+
+	/* Real Mode Support Registers */
+	u64 mfc_rm_boundary;					/* 0x900 */
+	u8  pad_0x908_0x938[0x30];				/* 0x908 */
+	u64 smf_dma_signal_sel;					/* 0x938 */
+#define mfc_dma1_mask_lsb	41
+#define mfc_dma1_shift		(63 - mfc_dma1_mask_lsb)
+#define mfc_dma1_mask		(0x3LL << mfc_dma1_shift)
+#define mfc_dma1_bits		(0x1LL << mfc_dma1_shift)
+#define mfc_dma2_mask_lsb	43
+#define mfc_dma2_shift		(63 - mfc_dma2_mask_lsb)
+#define mfc_dma2_mask		(0x3LL << mfc_dma2_shift)
+#define mfc_dma2_bits		(0x1LL << mfc_dma2_shift)
+	u8  pad_0x940_0xa38[0xf8];				/* 0x940 */
+	u64 smm_signal_sel;					/* 0xa38 */
+#define smm_sig_mask_lsb	12
+#define smm_sig_shift		(63 - smm_sig_mask_lsb)
+#define smm_sig_mask		(0x3LL << smm_sig_shift)
+#define smm_sig_bus0_bits	(0x2LL << smm_sig_shift)
+#define smm_sig_bus2_bits	(0x1LL << smm_sig_shift)
+	u8  pad_0xa40_0xc00[0xc00 - 0xa40];			/* 0xa40 */
+
+	/* DMA Command Error Area */
+	u64 mfc_cer_R;						/* 0xc00 */
+#define MFC_CER_Q		(1 << 31)
+#define MFC_CER_SPU_QUEUE	MFC_CER_Q
+	u8  pad_0xc08_0x1000[0x1000 - 0xc08];			/* 0xc08 */
+
+	/* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */
+	/* DMA Command Error Area */
+	u64 spu_ecc_cntl_RW;					/* 0x1000 */
+#define SPU_ECC_CNTL_E			(1ull << 0ull)
+#define SPU_ECC_CNTL_ENABLE		SPU_ECC_CNTL_E
+#define SPU_ECC_CNTL_DISABLE		(~SPU_ECC_CNTL_E & 1L)
+#define SPU_ECC_CNTL_S			(1ull << 1ull)
+#define SPU_ECC_STOP_AFTER_ERROR	SPU_ECC_CNTL_S
+#define SPU_ECC_CONTINUE_AFTER_ERROR	(~SPU_ECC_CNTL_S & 2L)
+#define SPU_ECC_CNTL_B			(1ull << 2ull)
+#define SPU_ECC_BACKGROUND_ENABLE	SPU_ECC_CNTL_B
+#define SPU_ECC_BACKGROUND_DISABLE	(~SPU_ECC_CNTL_B & 4L)
+#define SPU_ECC_CNTL_I_SHIFT		3ull
+#define SPU_ECC_CNTL_I_MASK		(3ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_WRITE_ALWAYS		(~SPU_ECC_CNTL_I & 12L)
+#define SPU_ECC_WRITE_CORRECTABLE	(1ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_WRITE_UNCORRECTABLE	(3ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_CNTL_D			(1ull << 5ull)
+#define SPU_ECC_DETECTION_ENABLE	SPU_ECC_CNTL_D
+#define SPU_ECC_DETECTION_DISABLE	(~SPU_ECC_CNTL_D & 32L)
+	u64 spu_ecc_stat_RW;					/* 0x1008 */
+#define SPU_ECC_CORRECTED_ERROR		(1ull << 0ul)
+#define SPU_ECC_UNCORRECTED_ERROR	(1ull << 1ul)
+#define SPU_ECC_SCRUB_COMPLETE		(1ull << 2ul)
+#define SPU_ECC_SCRUB_IN_PROGRESS	(1ull << 3ul)
+#define SPU_ECC_INSTRUCTION_ERROR	(1ull << 4ul)
+#define SPU_ECC_DATA_ERROR		(1ull << 5ul)
+#define SPU_ECC_DMA_ERROR		(1ull << 6ul)
+#define SPU_ECC_STATUS_CNT_MASK		(256ull << 8)
+	u64 spu_ecc_addr_RW;					/* 0x1010 */
+	u64 spu_err_mask_RW;					/* 0x1018 */
+#define SPU_ERR_ILLEGAL_INSTR		(1ull << 0ul)
+#define SPU_ERR_ILLEGAL_CHANNEL		(1ull << 1ul)
+	u8  pad_0x1020_0x1028[0x1028 - 0x1020];			/* 0x1020 */
+
+	/* SPU Debug-Trace Bus (DTB) Selection Registers */
+	u64 spu_trig0_sel;					/* 0x1028 */
+	u64 spu_trig1_sel;					/* 0x1030 */
+	u64 spu_trig2_sel;					/* 0x1038 */
+	u64 spu_trig3_sel;					/* 0x1040 */
+	u64 spu_trace_sel;					/* 0x1048 */
+#define spu_trace_sel_mask		0x1f1fLL
+#define spu_trace_sel_bus0_bits		0x1000LL
+#define spu_trace_sel_bus2_bits		0x0010LL
+	u64 spu_event0_sel;					/* 0x1050 */
+	u64 spu_event1_sel;					/* 0x1058 */
+	u64 spu_event2_sel;					/* 0x1060 */
+	u64 spu_event3_sel;					/* 0x1068 */
+	u64 spu_trace_cntl;					/* 0x1070 */
+} __attribute__ ((aligned(0x2000)));
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h
new file mode 100644
index 00000000000..a40fd491250
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_csa.h
@@ -0,0 +1,266 @@
+/*
+ * spu_csa.h: Definitions for SPU context save area (CSA).
+ *
+ * (C) Copyright IBM 2005
+ *
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_CSA_H_
+#define _SPU_CSA_H_
+#ifdef __KERNEL__
+
+/*
+ * Total number of 128-bit registers.
+ */
+#define NR_SPU_GPRS         	128
+#define NR_SPU_SPRS         	9
+#define NR_SPU_REGS_PAD	    	7
+#define NR_SPU_SPILL_REGS   	144	/* GPRS + SPRS + PAD */
+#define SIZEOF_SPU_SPILL_REGS	NR_SPU_SPILL_REGS * 16
+
+#define SPU_SAVE_COMPLETE      	0x3FFB
+#define SPU_RESTORE_COMPLETE   	0x3FFC
+
+/*
+ * Definitions for various 'stopped' status conditions,
+ * to be recreated during context restore.
+ */
+#define SPU_STOPPED_STATUS_P    1
+#define SPU_STOPPED_STATUS_I    2
+#define SPU_STOPPED_STATUS_H    3
+#define SPU_STOPPED_STATUS_S    4
+#define SPU_STOPPED_STATUS_S_I  5
+#define SPU_STOPPED_STATUS_S_P  6
+#define SPU_STOPPED_STATUS_P_H  7
+#define SPU_STOPPED_STATUS_P_I  8
+#define SPU_STOPPED_STATUS_R    9
+
+/*
+ * Definitions for software decrementer status flag.
+ */
+#define SPU_DECR_STATUS_RUNNING 0x1
+#define SPU_DECR_STATUS_WRAPPED 0x2
+
+#ifndef  __ASSEMBLY__
+/**
+ * spu_reg128 - generic 128-bit register definition.
+ */
+struct spu_reg128 {
+	u32 slot[4];
+};
+
+/**
+ * struct spu_lscsa - Local Store Context Save Area.
+ * @gprs: Array of saved registers.
+ * @fpcr: Saved floating point status control register.
+ * @decr: Saved decrementer value.
+ * @decr_status: Indicates software decrementer status flags.
+ * @ppu_mb: Saved PPU mailbox data.
+ * @ppuint_mb: Saved PPU interrupting mailbox data.
+ * @tag_mask: Saved tag group mask.
+ * @event_mask: Saved event mask.
+ * @srr0: Saved SRR0.
+ * @stopped_status: Conditions to be recreated by restore.
+ * @ls: Saved contents of Local Storage Area.
+ *
+ * The LSCSA represents state that is primarily saved and
+ * restored by SPU-side code.
+ */
+struct spu_lscsa {
+	struct spu_reg128 gprs[128];
+	struct spu_reg128 fpcr;
+	struct spu_reg128 decr;
+	struct spu_reg128 decr_status;
+	struct spu_reg128 ppu_mb;
+	struct spu_reg128 ppuint_mb;
+	struct spu_reg128 tag_mask;
+	struct spu_reg128 event_mask;
+	struct spu_reg128 srr0;
+	struct spu_reg128 stopped_status;
+
+	/*
+	 * 'ls' must be page-aligned on all configurations.
+	 * Since we don't want to rely on having the spu-gcc
+	 * installed to build the kernel and this structure
+	 * is used in the SPU-side code, make it 64k-page
+	 * aligned for now.
+	 */
+	unsigned char ls[LS_SIZE] __attribute__((aligned(65536)));
+};
+
+#ifndef __SPU__
+/*
+ * struct spu_problem_collapsed - condensed problem state area, w/o pads.
+ */
+struct spu_problem_collapsed {
+	u64 spc_mssync_RW;
+	u32 mfc_lsa_W;
+	u32 unused_pad0;
+	u64 mfc_ea_W;
+	union mfc_tag_size_class_cmd mfc_union_W;
+	u32 dma_qstatus_R;
+	u32 dma_querytype_RW;
+	u32 dma_querymask_RW;
+	u32 dma_tagstatus_R;
+	u32 pu_mb_R;
+	u32 spu_mb_W;
+	u32 mb_stat_R;
+	u32 spu_runcntl_RW;
+	u32 spu_status_R;
+	u32 spu_spc_R;
+	u32 spu_npc_RW;
+	u32 signal_notify1;
+	u32 signal_notify2;
+	u32 unused_pad1;
+};
+
+/*
+ * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads.
+ */
+struct spu_priv1_collapsed {
+	u64 mfc_sr1_RW;
+	u64 mfc_lpid_RW;
+	u64 spu_idr_RW;
+	u64 mfc_vr_RO;
+	u64 spu_vr_RO;
+	u64 int_mask_class0_RW;
+	u64 int_mask_class1_RW;
+	u64 int_mask_class2_RW;
+	u64 int_stat_class0_RW;
+	u64 int_stat_class1_RW;
+	u64 int_stat_class2_RW;
+	u64 int_route_RW;
+	u64 mfc_atomic_flush_RW;
+	u64 resource_allocation_groupID_RW;
+	u64 resource_allocation_enable_RW;
+	u64 mfc_fir_R;
+	u64 mfc_fir_status_or_W;
+	u64 mfc_fir_status_and_W;
+	u64 mfc_fir_mask_R;
+	u64 mfc_fir_mask_or_W;
+	u64 mfc_fir_mask_and_W;
+	u64 mfc_fir_chkstp_enable_RW;
+	u64 smf_sbi_signal_sel;
+	u64 smf_ato_signal_sel;
+	u64 tlb_index_hint_RO;
+	u64 tlb_index_W;
+	u64 tlb_vpn_RW;
+	u64 tlb_rpn_RW;
+	u64 tlb_invalidate_entry_W;
+	u64 tlb_invalidate_all_W;
+	u64 smm_hid;
+	u64 mfc_accr_RW;
+	u64 mfc_dsisr_RW;
+	u64 mfc_dar_RW;
+	u64 rmt_index_RW;
+	u64 rmt_data1_RW;
+	u64 mfc_dsir_R;
+	u64 mfc_lsacr_RW;
+	u64 mfc_lscrr_R;
+	u64 mfc_tclass_id_RW;
+	u64 mfc_rm_boundary;
+	u64 smf_dma_signal_sel;
+	u64 smm_signal_sel;
+	u64 mfc_cer_R;
+	u64 pu_ecc_cntl_RW;
+	u64 pu_ecc_stat_RW;
+	u64 spu_ecc_addr_RW;
+	u64 spu_err_mask_RW;
+	u64 spu_trig0_sel;
+	u64 spu_trig1_sel;
+	u64 spu_trig2_sel;
+	u64 spu_trig3_sel;
+	u64 spu_trace_sel;
+	u64 spu_event0_sel;
+	u64 spu_event1_sel;
+	u64 spu_event2_sel;
+	u64 spu_event3_sel;
+	u64 spu_trace_cntl;
+};
+
+/*
+ * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
+ */
+struct spu_priv2_collapsed {
+	u64 slb_index_W;
+	u64 slb_esid_RW;
+	u64 slb_vsid_RW;
+	u64 slb_invalidate_entry_W;
+	u64 slb_invalidate_all_W;
+	struct mfc_cq_sr spuq[16];
+	struct mfc_cq_sr puq[8];
+	u64 mfc_control_RW;
+	u64 puint_mb_R;
+	u64 spu_privcntl_RW;
+	u64 spu_lslr_RW;
+	u64 spu_chnlcntptr_RW;
+	u64 spu_chnlcnt_RW;
+	u64 spu_chnldata_RW;
+	u64 spu_cfg_RW;
+	u64 spu_tag_status_query_RW;
+	u64 spu_cmd_buf1_RW;
+	u64 spu_cmd_buf2_RW;
+	u64 spu_atomic_status_RW;
+};
+
+/**
+ * struct spu_state
+ * @lscsa: Local Store Context Save Area.
+ * @prob: Collapsed Problem State Area, w/o pads.
+ * @priv1: Collapsed Privileged 1 Area, w/o pads.
+ * @priv2: Collapsed Privileged 2 Area, w/o pads.
+ * @spu_chnlcnt_RW: Array of saved channel counts.
+ * @spu_chnldata_RW: Array of saved channel data.
+ * @suspend_time: Time stamp when decrementer disabled.
+ *
+ * Structure representing the whole of the SPU
+ * context save area (CSA).  This struct contains
+ * all of the state necessary to suspend and then
+ * later optionally resume execution of an SPU
+ * context.
+ *
+ * The @lscsa region is by far the largest, and is
+ * allocated separately so that it may either be
+ * pinned or mapped to/from application memory, as
+ * appropriate for the OS environment.
+ */
+struct spu_state {
+	struct spu_lscsa *lscsa;
+#ifdef CONFIG_SPU_FS_64K_LS
+	int		use_big_pages;
+	/* One struct page per 64k page */
+#define SPU_LSCSA_NUM_BIG_PAGES	(sizeof(struct spu_lscsa) / 0x10000)
+	struct page	*lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES];
+#endif
+	struct spu_problem_collapsed prob;
+	struct spu_priv1_collapsed priv1;
+	struct spu_priv2_collapsed priv2;
+	u64 spu_chnlcnt_RW[32];
+	u64 spu_chnldata_RW[32];
+	u32 spu_mailbox_data[4];
+	u32 pu_mailbox_data[1];
+	u64 class_0_dar, class_0_pending;
+	u64 class_1_dar, class_1_dsisr;
+	unsigned long suspend_time;
+	spinlock_t register_lock;
+};
+
+#endif /* !__SPU__ */
+#endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+#endif /* _SPU_CSA_H_ */
diff --git a/arch/powerpc/include/asm/spu_info.h b/arch/powerpc/include/asm/spu_info.h
new file mode 100644
index 00000000000..3545efbf989
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_info.h
@@ -0,0 +1,54 @@
+/*
+ * SPU info structures
+ *
+ * (C) Copyright 2006 IBM Corp.
+ *
+ * Author: Dwayne Grant McConnell <decimal@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_INFO_H
+#define _SPU_INFO_H
+
+#ifdef __KERNEL__
+#include <asm/spu.h>
+#include <linux/types.h>
+#else
+struct mfc_cq_sr {
+	__u64 mfc_cq_data0_RW;
+	__u64 mfc_cq_data1_RW;
+	__u64 mfc_cq_data2_RW;
+	__u64 mfc_cq_data3_RW;
+};
+#endif /* __KERNEL__ */
+
+struct spu_dma_info {
+	__u64 dma_info_type;
+	__u64 dma_info_mask;
+	__u64 dma_info_status;
+	__u64 dma_info_stall_and_notify;
+	__u64 dma_info_atomic_command_status;
+	struct mfc_cq_sr dma_info_command_data[16];
+};
+
+struct spu_proxydma_info {
+	__u64 proxydma_info_type;
+	__u64 proxydma_info_mask;
+	__u64 proxydma_info_status;
+	struct mfc_cq_sr proxydma_info_command_data[8];
+};
+
+#endif
diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h
new file mode 100644
index 00000000000..25020a34ce7
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_priv1.h
@@ -0,0 +1,236 @@
+/*
+ * Defines an spu hypervisor abstraction layer.
+ *
+ *  Copyright 2006 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_SPU_PRIV1_H)
+#define _SPU_PRIV1_H
+#if defined(__KERNEL__)
+
+#include <linux/types.h>
+
+struct spu;
+struct spu_context;
+
+/* access to priv1 registers */
+
+struct spu_priv1_ops {
+	void (*int_mask_and) (struct spu *spu, int class, u64 mask);
+	void (*int_mask_or) (struct spu *spu, int class, u64 mask);
+	void (*int_mask_set) (struct spu *spu, int class, u64 mask);
+	u64 (*int_mask_get) (struct spu *spu, int class);
+	void (*int_stat_clear) (struct spu *spu, int class, u64 stat);
+	u64 (*int_stat_get) (struct spu *spu, int class);
+	void (*cpu_affinity_set) (struct spu *spu, int cpu);
+	u64 (*mfc_dar_get) (struct spu *spu);
+	u64 (*mfc_dsisr_get) (struct spu *spu);
+	void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr);
+	void (*mfc_sdr_setup) (struct spu *spu);
+	void (*mfc_sr1_set) (struct spu *spu, u64 sr1);
+	u64 (*mfc_sr1_get) (struct spu *spu);
+	void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id);
+	u64 (*mfc_tclass_id_get) (struct spu *spu);
+	void (*tlb_invalidate) (struct spu *spu);
+	void (*resource_allocation_groupID_set) (struct spu *spu, u64 id);
+	u64 (*resource_allocation_groupID_get) (struct spu *spu);
+	void (*resource_allocation_enable_set) (struct spu *spu, u64 enable);
+	u64 (*resource_allocation_enable_get) (struct spu *spu);
+};
+
+extern const struct spu_priv1_ops* spu_priv1_ops;
+
+static inline void
+spu_int_mask_and (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_and(spu, class, mask);
+}
+
+static inline void
+spu_int_mask_or (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_or(spu, class, mask);
+}
+
+static inline void
+spu_int_mask_set (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_set(spu, class, mask);
+}
+
+static inline u64
+spu_int_mask_get (struct spu *spu, int class)
+{
+	return spu_priv1_ops->int_mask_get(spu, class);
+}
+
+static inline void
+spu_int_stat_clear (struct spu *spu, int class, u64 stat)
+{
+	spu_priv1_ops->int_stat_clear(spu, class, stat);
+}
+
+static inline u64
+spu_int_stat_get (struct spu *spu, int class)
+{
+	return spu_priv1_ops->int_stat_get (spu, class);
+}
+
+static inline void
+spu_cpu_affinity_set (struct spu *spu, int cpu)
+{
+	spu_priv1_ops->cpu_affinity_set(spu, cpu);
+}
+
+static inline u64
+spu_mfc_dar_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_dar_get(spu);
+}
+
+static inline u64
+spu_mfc_dsisr_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_dsisr_get(spu);
+}
+
+static inline void
+spu_mfc_dsisr_set (struct spu *spu, u64 dsisr)
+{
+	spu_priv1_ops->mfc_dsisr_set(spu, dsisr);
+}
+
+static inline void
+spu_mfc_sdr_setup (struct spu *spu)
+{
+	spu_priv1_ops->mfc_sdr_setup(spu);
+}
+
+static inline void
+spu_mfc_sr1_set (struct spu *spu, u64 sr1)
+{
+	spu_priv1_ops->mfc_sr1_set(spu, sr1);
+}
+
+static inline u64
+spu_mfc_sr1_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_sr1_get(spu);
+}
+
+static inline void
+spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id)
+{
+	spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id);
+}
+
+static inline u64
+spu_mfc_tclass_id_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_tclass_id_get(spu);
+}
+
+static inline void
+spu_tlb_invalidate (struct spu *spu)
+{
+	spu_priv1_ops->tlb_invalidate(spu);
+}
+
+static inline void
+spu_resource_allocation_groupID_set (struct spu *spu, u64 id)
+{
+	spu_priv1_ops->resource_allocation_groupID_set(spu, id);
+}
+
+static inline u64
+spu_resource_allocation_groupID_get (struct spu *spu)
+{
+	return spu_priv1_ops->resource_allocation_groupID_get(spu);
+}
+
+static inline void
+spu_resource_allocation_enable_set (struct spu *spu, u64 enable)
+{
+	spu_priv1_ops->resource_allocation_enable_set(spu, enable);
+}
+
+static inline u64
+spu_resource_allocation_enable_get (struct spu *spu)
+{
+	return spu_priv1_ops->resource_allocation_enable_get(spu);
+}
+
+/* spu management abstraction */
+
+struct spu_management_ops {
+	int (*enumerate_spus)(int (*fn)(void *data));
+	int (*create_spu)(struct spu *spu, void *data);
+	int (*destroy_spu)(struct spu *spu);
+	void (*enable_spu)(struct spu_context *ctx);
+	void (*disable_spu)(struct spu_context *ctx);
+	int (*init_affinity)(void);
+};
+
+extern const struct spu_management_ops* spu_management_ops;
+
+static inline int
+spu_enumerate_spus (int (*fn)(void *data))
+{
+	return spu_management_ops->enumerate_spus(fn);
+}
+
+static inline int
+spu_create_spu (struct spu *spu, void *data)
+{
+	return spu_management_ops->create_spu(spu, data);
+}
+
+static inline int
+spu_destroy_spu (struct spu *spu)
+{
+	return spu_management_ops->destroy_spu(spu);
+}
+
+static inline int
+spu_init_affinity (void)
+{
+	return spu_management_ops->init_affinity();
+}
+
+static inline void
+spu_enable_spu (struct spu_context *ctx)
+{
+	spu_management_ops->enable_spu(ctx);
+}
+
+static inline void
+spu_disable_spu (struct spu_context *ctx)
+{
+	spu_management_ops->disable_spu(ctx);
+}
+
+/*
+ * The declarations folowing are put here for convenience
+ * and only intended to be used by the platform setup code.
+ */
+
+extern const struct spu_priv1_ops spu_priv1_mmio_ops;
+extern const struct spu_priv1_ops spu_priv1_beat_ops;
+
+extern const struct spu_management_ops spu_management_of_ops;
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/sstep.h b/arch/powerpc/include/asm/sstep.h
new file mode 100644
index 00000000000..f593b0f9b62
--- /dev/null
+++ b/arch/powerpc/include/asm/sstep.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct pt_regs;
+
+/*
+ * We don't allow single-stepping an mtmsrd that would clear
+ * MSR_RI, since that would make the exception unrecoverable.
+ * Since we need to single-step to proceed from a breakpoint,
+ * we don't allow putting a breakpoint on an mtmsrd instruction.
+ * Similarly we don't allow breakpoints on rfid instructions.
+ * These macros tell us if an instruction is a mtmsrd or rfid.
+ * Note that IS_MTMSRD returns true for both an mtmsr (32-bit)
+ * and an mtmsrd (64-bit).
+ */
+#define IS_MTMSRD(instr)	(((instr) & 0xfc0007be) == 0x7c000124)
+#define IS_RFID(instr)		(((instr) & 0xfc0007fe) == 0x4c000024)
+#define IS_RFI(instr)		(((instr) & 0xfc0007fe) == 0x4c000064)
+
+/* Emulate instructions that cause a transfer of control. */
+extern int emulate_step(struct pt_regs *regs, unsigned int instr);
diff --git a/arch/powerpc/include/asm/stat.h b/arch/powerpc/include/asm/stat.h
new file mode 100644
index 00000000000..e4edc510b53
--- /dev/null
+++ b/arch/powerpc/include/asm/stat.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_POWERPC_STAT_H
+#define _ASM_POWERPC_STAT_H
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+
+#define STAT_HAVE_NSEC 1
+
+#ifndef __powerpc64__
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+#endif /* !__powerpc64__ */
+
+struct stat {
+	unsigned long	st_dev;
+	ino_t		st_ino;
+#ifdef __powerpc64__
+	nlink_t		st_nlink;
+	mode_t		st_mode;
+#else
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+#endif
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned long	st_rdev;
+	off_t		st_size;
+	unsigned long	st_blksize;
+	unsigned long	st_blocks;
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	unsigned long	__unused4;
+	unsigned long	__unused5;
+#ifdef __powerpc64__
+	unsigned long	__unused6;
+#endif
+};
+
+/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+struct stat64 {
+	unsigned long long st_dev;		/* Device.  */
+	unsigned long long st_ino;		/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev;	/* Device number, if device.  */
+	unsigned short	__pad2;
+	long long	st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	long long	st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#endif /* _ASM_POWERPC_STAT_H */
diff --git a/arch/powerpc/include/asm/statfs.h b/arch/powerpc/include/asm/statfs.h
new file mode 100644
index 00000000000..67024026c10
--- /dev/null
+++ b/arch/powerpc/include/asm/statfs.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_POWERPC_STATFS_H
+#define _ASM_POWERPC_STATFS_H
+
+/* For ppc32 we just use the generic definitions, not so simple on ppc64 */
+
+#ifndef __powerpc64__
+#include <asm-generic/statfs.h>
+#else
+
+#ifndef __KERNEL_STRICT_NAMES
+#include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * We're already 64-bit, so duplicate the definition
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+#endif /* ! __powerpc64__ */
+#endif
diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
new file mode 100644
index 00000000000..e40010abcaf
--- /dev/null
+++ b/arch/powerpc/include/asm/string.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_POWERPC_STRING_H
+#define _ASM_POWERPC_STRING_H
+
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRNCPY
+#define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRNCMP
+#define __HAVE_ARCH_STRCAT
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMCHR
+
+extern char * strcpy(char *,const char *);
+extern char * strncpy(char *,const char *, __kernel_size_t);
+extern __kernel_size_t strlen(const char *);
+extern int strcmp(const char *,const char *);
+extern int strncmp(const char *, const char *, __kernel_size_t);
+extern char * strcat(char *, const char *);
+extern void * memset(void *,int,__kernel_size_t);
+extern void * memcpy(void *,const void *,__kernel_size_t);
+extern void * memmove(void *,const void *,__kernel_size_t);
+extern int memcmp(const void *,const void *,__kernel_size_t);
+extern void * memchr(const void *,int,__kernel_size_t);
+
+#endif /* __KERNEL__ */
+
+#endif	/* _ASM_POWERPC_STRING_H */
diff --git a/arch/powerpc/include/asm/suspend.h b/arch/powerpc/include/asm/suspend.h
new file mode 100644
index 00000000000..cbf2c9404c3
--- /dev/null
+++ b/arch/powerpc/include/asm/suspend.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_POWERPC_SUSPEND_H
+#define __ASM_POWERPC_SUSPEND_H
+
+static inline int arch_prepare_suspend(void) { return 0; }
+
+void save_processor_state(void);
+void restore_processor_state(void);
+
+#endif /* __ASM_POWERPC_SUSPEND_H */
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
new file mode 100644
index 00000000000..45963e80f55
--- /dev/null
+++ b/arch/powerpc/include/asm/synch.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_POWERPC_SYNCH_H 
+#define _ASM_POWERPC_SYNCH_H 
+#ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <asm/feature-fixups.h>
+
+#ifndef __ASSEMBLY__
+extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
+extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
+			     void *fixup_end);
+
+static inline void eieio(void)
+{
+	__asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+static inline void isync(void)
+{
+	__asm__ __volatile__ ("isync" : : : "memory");
+}
+#endif /* __ASSEMBLY__ */
+
+#if defined(__powerpc64__)
+#    define LWSYNC	lwsync
+#elif defined(CONFIG_E500)
+#    define LWSYNC					\
+	START_LWSYNC_SECTION(96);			\
+	sync;						\
+	MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup);
+#else
+#    define LWSYNC	sync
+#endif
+
+#ifdef CONFIG_SMP
+#define ISYNC_ON_SMP	"\n\tisync\n"
+#define LWSYNC_ON_SMP	stringify_in_c(LWSYNC) "\n"
+#else
+#define ISYNC_ON_SMP
+#define LWSYNC_ON_SMP
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_SYNCH_H */
diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
new file mode 100644
index 00000000000..efa7f0b879f
--- /dev/null
+++ b/arch/powerpc/include/asm/syscall.h
@@ -0,0 +1,84 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+#include <linux/sched.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->gpr[3] = regs->orig_gpr3;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->gpr[3];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		regs->ccr |= 0x1000L;
+		regs->gpr[3] = -error;
+	} else {
+		regs->ccr &= ~0x1000L;
+		regs->gpr[3] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+#ifdef CONFIG_PPC64
+	if (test_tsk_thread_flag(task, TIF_32BIT)) {
+		/*
+		 * Zero-extend 32-bit argument values.  The high bits are
+		 * garbage ignored by the actual syscall dispatch.
+		 */
+		while (n-- > 0)
+			args[n] = (u32) regs->gpr[3 + i + n];
+		return;
+	}
+#endif
+	memcpy(args, &regs->gpr[3 + i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs->gpr[3 + i], args, n * sizeof(args[0]));
+}
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h
new file mode 100644
index 00000000000..eb8eb400c66
--- /dev/null
+++ b/arch/powerpc/include/asm/syscalls.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_POWERPC_SYSCALLS_H
+#define __ASM_POWERPC_SYSCALLS_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <asm/signal.h>
+
+struct new_utsname;
+struct pt_regs;
+struct rtas_args;
+struct sigaction;
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, off_t offset);
+asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(unsigned long a0, unsigned long a1,
+		unsigned long a2, unsigned long a3, unsigned long a4,
+		unsigned long a5, struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp,
+		int __user *parent_tidp, void __user *child_threadptr,
+		int __user *child_tidp, int p6, struct pt_regs *regs);
+asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
+		unsigned long p3, unsigned long p4, unsigned long p5,
+		unsigned long p6, struct pt_regs *regs);
+asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
+		unsigned long p3, unsigned long p4, unsigned long p5,
+		unsigned long p6, struct pt_regs *regs);
+asmlinkage long sys_pipe(int __user *fildes);
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
+asmlinkage long sys_rt_sigaction(int sig,
+		const struct sigaction __user *act,
+		struct sigaction __user *oact, size_t sigsetsize);
+asmlinkage int sys_ipc(uint call, int first, unsigned long second,
+		long third, void __user *ptr, long fifth);
+asmlinkage long ppc64_personality(unsigned long personality);
+asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
+asmlinkage time_t sys64_time(time_t __user * tloc);
+asmlinkage long ppc_newuname(struct new_utsname __user * name);
+
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
+		size_t sigsetsize);
+asmlinkage long sys_sigaltstack(const stack_t __user *uss,
+		stack_t __user *uoss, unsigned long r5, unsigned long r6,
+		unsigned long r7, unsigned long r8, struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_SYSCALLS_H */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
new file mode 100644
index 00000000000..f6cc7a43b4f
--- /dev/null
+++ b/arch/powerpc/include/asm/systbl.h
@@ -0,0 +1,324 @@
+/*
+ * List of powerpc syscalls. For the meaning of the _SPU suffix see
+ * arch/powerpc/platforms/cell/spu_callbacks.c
+ */
+
+SYSCALL(restart_syscall)
+SYSCALL(exit)
+PPC_SYS(fork)
+SYSCALL_SPU(read)
+SYSCALL_SPU(write)
+COMPAT_SYS_SPU(open)
+SYSCALL_SPU(close)
+COMPAT_SYS_SPU(waitpid)
+COMPAT_SYS_SPU(creat)
+SYSCALL_SPU(link)
+SYSCALL_SPU(unlink)
+COMPAT_SYS(execve)
+SYSCALL_SPU(chdir)
+COMPAT_SYS_SPU(time)
+SYSCALL_SPU(mknod)
+SYSCALL_SPU(chmod)
+SYSCALL_SPU(lchown)
+SYSCALL(ni_syscall)
+OLDSYS(stat)
+SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek)
+SYSCALL_SPU(getpid)
+COMPAT_SYS(mount)
+SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount)
+SYSCALL_SPU(setuid)
+SYSCALL_SPU(getuid)
+COMPAT_SYS_SPU(stime)
+COMPAT_SYS(ptrace)
+SYSCALL_SPU(alarm)
+OLDSYS(fstat)
+COMPAT_SYS(pause)
+COMPAT_SYS(utime)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(access)
+COMPAT_SYS_SPU(nice)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(sync)
+COMPAT_SYS_SPU(kill)
+SYSCALL_SPU(rename)
+COMPAT_SYS_SPU(mkdir)
+SYSCALL_SPU(rmdir)
+SYSCALL_SPU(dup)
+SYSCALL_SPU(pipe)
+COMPAT_SYS_SPU(times)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(brk)
+SYSCALL_SPU(setgid)
+SYSCALL_SPU(getgid)
+SYSCALL(signal)
+SYSCALL_SPU(geteuid)
+SYSCALL_SPU(getegid)
+SYSCALL(acct)
+SYSCALL(umount)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(ioctl)
+COMPAT_SYS_SPU(fcntl)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(setpgid)
+SYSCALL(ni_syscall)
+SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
+COMPAT_SYS_SPU(umask)
+SYSCALL_SPU(chroot)
+SYSCALL(ustat)
+SYSCALL_SPU(dup2)
+SYSCALL_SPU(getppid)
+SYSCALL_SPU(getpgrp)
+SYSCALL_SPU(setsid)
+SYS32ONLY(sigaction)
+SYSCALL_SPU(sgetmask)
+COMPAT_SYS_SPU(ssetmask)
+SYSCALL_SPU(setreuid)
+SYSCALL_SPU(setregid)
+SYS32ONLY(sigsuspend)
+COMPAT_SYS(sigpending)
+COMPAT_SYS_SPU(sethostname)
+COMPAT_SYS_SPU(setrlimit)
+COMPAT_SYS(old_getrlimit)
+COMPAT_SYS_SPU(getrusage)
+COMPAT_SYS_SPU(gettimeofday)
+COMPAT_SYS_SPU(settimeofday)
+COMPAT_SYS_SPU(getgroups)
+COMPAT_SYS_SPU(setgroups)
+SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select)
+SYSCALL_SPU(symlink)
+OLDSYS(lstat)
+COMPAT_SYS_SPU(readlink)
+SYSCALL(uselib)
+SYSCALL(swapon)
+SYSCALL(reboot)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
+SYSCALL_SPU(mmap)
+SYSCALL_SPU(munmap)
+SYSCALL_SPU(truncate)
+SYSCALL_SPU(ftruncate)
+SYSCALL_SPU(fchmod)
+SYSCALL_SPU(fchown)
+COMPAT_SYS_SPU(getpriority)
+COMPAT_SYS_SPU(setpriority)
+SYSCALL(ni_syscall)
+COMPAT_SYS(statfs)
+COMPAT_SYS(fstatfs)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(socketcall)
+COMPAT_SYS_SPU(syslog)
+COMPAT_SYS_SPU(setitimer)
+COMPAT_SYS_SPU(getitimer)
+COMPAT_SYS_SPU(newstat)
+COMPAT_SYS_SPU(newlstat)
+COMPAT_SYS_SPU(newfstat)
+SYSX(sys_ni_syscall,sys_uname,sys_uname)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(vhangup)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(wait4)
+SYSCALL(swapoff)
+COMPAT_SYS_SPU(sysinfo)
+COMPAT_SYS(ipc)
+SYSCALL_SPU(fsync)
+SYS32ONLY(sigreturn)
+PPC_SYS(clone)
+COMPAT_SYS_SPU(setdomainname)
+PPC_SYS_SPU(newuname)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(adjtimex)
+SYSCALL_SPU(mprotect)
+SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask)
+SYSCALL(ni_syscall)
+SYSCALL(init_module)
+SYSCALL(delete_module)
+SYSCALL(ni_syscall)
+SYSCALL(quotactl)
+COMPAT_SYS_SPU(getpgid)
+SYSCALL_SPU(fchdir)
+SYSCALL_SPU(bdflush)
+COMPAT_SYS(sysfs)
+SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(setfsuid)
+SYSCALL_SPU(setfsgid)
+SYSCALL_SPU(llseek)
+COMPAT_SYS_SPU(getdents)
+SYSX_SPU(sys_select,ppc32_select,ppc_select)
+SYSCALL_SPU(flock)
+SYSCALL_SPU(msync)
+COMPAT_SYS_SPU(readv)
+COMPAT_SYS_SPU(writev)
+COMPAT_SYS_SPU(getsid)
+SYSCALL_SPU(fdatasync)
+COMPAT_SYS(sysctl)
+SYSCALL_SPU(mlock)
+SYSCALL_SPU(munlock)
+SYSCALL_SPU(mlockall)
+SYSCALL_SPU(munlockall)
+COMPAT_SYS_SPU(sched_setparam)
+COMPAT_SYS_SPU(sched_getparam)
+COMPAT_SYS_SPU(sched_setscheduler)
+COMPAT_SYS_SPU(sched_getscheduler)
+SYSCALL_SPU(sched_yield)
+COMPAT_SYS_SPU(sched_get_priority_max)
+COMPAT_SYS_SPU(sched_get_priority_min)
+COMPAT_SYS_SPU(sched_rr_get_interval)
+COMPAT_SYS_SPU(nanosleep)
+SYSCALL_SPU(mremap)
+SYSCALL_SPU(setresuid)
+SYSCALL_SPU(getresuid)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(poll)
+COMPAT_SYS(nfsservctl)
+SYSCALL_SPU(setresgid)
+SYSCALL_SPU(getresgid)
+COMPAT_SYS_SPU(prctl)
+COMPAT_SYS(rt_sigreturn)
+COMPAT_SYS(rt_sigaction)
+COMPAT_SYS(rt_sigprocmask)
+COMPAT_SYS(rt_sigpending)
+COMPAT_SYS(rt_sigtimedwait)
+COMPAT_SYS(rt_sigqueueinfo)
+COMPAT_SYS(rt_sigsuspend)
+COMPAT_SYS_SPU(pread64)
+COMPAT_SYS_SPU(pwrite64)
+SYSCALL_SPU(chown)
+SYSCALL_SPU(getcwd)
+SYSCALL_SPU(capget)
+SYSCALL_SPU(capset)
+COMPAT_SYS(sigaltstack)
+SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+PPC_SYS(vfork)
+COMPAT_SYS_SPU(getrlimit)
+COMPAT_SYS_SPU(readahead)
+SYS32ONLY(mmap2)
+SYS32ONLY(truncate64)
+SYS32ONLY(ftruncate64)
+SYSX(sys_ni_syscall,sys_stat64,sys_stat64)
+SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64)
+SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64)
+SYSCALL(pciconfig_read)
+SYSCALL(pciconfig_write)
+SYSCALL(pciconfig_iobase)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(getdents64)
+SYSCALL_SPU(pivot_root)
+SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64)
+SYSCALL_SPU(madvise)
+SYSCALL_SPU(mincore)
+SYSCALL_SPU(gettid)
+SYSCALL_SPU(tkill)
+SYSCALL_SPU(setxattr)
+SYSCALL_SPU(lsetxattr)
+SYSCALL_SPU(fsetxattr)
+SYSCALL_SPU(getxattr)
+SYSCALL_SPU(lgetxattr)
+SYSCALL_SPU(fgetxattr)
+SYSCALL_SPU(listxattr)
+SYSCALL_SPU(llistxattr)
+SYSCALL_SPU(flistxattr)
+SYSCALL_SPU(removexattr)
+SYSCALL_SPU(lremovexattr)
+SYSCALL_SPU(fremovexattr)
+COMPAT_SYS_SPU(futex)
+COMPAT_SYS_SPU(sched_setaffinity)
+COMPAT_SYS_SPU(sched_getaffinity)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYS32ONLY(sendfile64)
+COMPAT_SYS_SPU(io_setup)
+SYSCALL_SPU(io_destroy)
+COMPAT_SYS_SPU(io_getevents)
+COMPAT_SYS_SPU(io_submit)
+SYSCALL_SPU(io_cancel)
+SYSCALL(set_tid_address)
+SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64)
+SYSCALL(exit_group)
+SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie)
+SYSCALL_SPU(epoll_create)
+SYSCALL_SPU(epoll_ctl)
+SYSCALL_SPU(epoll_wait)
+SYSCALL_SPU(remap_file_pages)
+SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create)
+COMPAT_SYS_SPU(timer_settime)
+COMPAT_SYS_SPU(timer_gettime)
+SYSCALL_SPU(timer_getoverrun)
+SYSCALL_SPU(timer_delete)
+COMPAT_SYS_SPU(clock_settime)
+COMPAT_SYS_SPU(clock_gettime)
+COMPAT_SYS_SPU(clock_getres)
+COMPAT_SYS_SPU(clock_nanosleep)
+SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
+COMPAT_SYS_SPU(tgkill)
+COMPAT_SYS_SPU(utimes)
+COMPAT_SYS_SPU(statfs64)
+COMPAT_SYS_SPU(fstatfs64)
+SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
+PPC_SYS_SPU(rtas)
+OLDSYS(debug_setcontext)
+SYSCALL(ni_syscall)
+COMPAT_SYS(migrate_pages)
+COMPAT_SYS(mbind)
+COMPAT_SYS(get_mempolicy)
+COMPAT_SYS(set_mempolicy)
+COMPAT_SYS(mq_open)
+SYSCALL(mq_unlink)
+COMPAT_SYS(mq_timedsend)
+COMPAT_SYS(mq_timedreceive)
+COMPAT_SYS(mq_notify)
+COMPAT_SYS(mq_getsetattr)
+COMPAT_SYS(kexec_load)
+COMPAT_SYS(add_key)
+COMPAT_SYS(request_key)
+COMPAT_SYS(keyctl)
+COMPAT_SYS(waitid)
+COMPAT_SYS(ioprio_set)
+COMPAT_SYS(ioprio_get)
+SYSCALL(inotify_init)
+SYSCALL(inotify_add_watch)
+SYSCALL(inotify_rm_watch)
+SYSCALL(spu_run)
+SYSCALL(spu_create)
+COMPAT_SYS(pselect6)
+COMPAT_SYS(ppoll)
+SYSCALL_SPU(unshare)
+SYSCALL_SPU(splice)
+SYSCALL_SPU(tee)
+COMPAT_SYS_SPU(vmsplice)
+COMPAT_SYS_SPU(openat)
+SYSCALL_SPU(mkdirat)
+SYSCALL_SPU(mknodat)
+SYSCALL_SPU(fchownat)
+COMPAT_SYS_SPU(futimesat)
+SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSCALL_SPU(unlinkat)
+SYSCALL_SPU(renameat)
+SYSCALL_SPU(linkat)
+SYSCALL_SPU(symlinkat)
+SYSCALL_SPU(readlinkat)
+SYSCALL_SPU(fchmodat)
+SYSCALL_SPU(faccessat)
+COMPAT_SYS_SPU(get_robust_list)
+COMPAT_SYS_SPU(set_robust_list)
+COMPAT_SYS_SPU(move_pages)
+SYSCALL_SPU(getcpu)
+COMPAT_SYS(epoll_pwait)
+COMPAT_SYS_SPU(utimensat)
+COMPAT_SYS_SPU(signalfd)
+SYSCALL_SPU(timerfd_create)
+SYSCALL_SPU(eventfd)
+COMPAT_SYS_SPU(sync_file_range2)
+COMPAT_SYS(fallocate)
+SYSCALL(subpage_prot)
+COMPAT_SYS_SPU(timerfd_settime)
+COMPAT_SYS_SPU(timerfd_gettime)
+COMPAT_SYS_SPU(signalfd4)
+SYSCALL_SPU(eventfd2)
+SYSCALL_SPU(epoll_create1)
+SYSCALL_SPU(dup3)
+SYSCALL_SPU(pipe2)
+SYSCALL(inotify_init1)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
new file mode 100644
index 00000000000..d6648c14332
--- /dev/null
+++ b/arch/powerpc/include/asm/system.h
@@ -0,0 +1,548 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef _ASM_POWERPC_SYSTEM_H
+#define _ASM_POWERPC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+#include <asm/hw_irq.h>
+
+/*
+ * Memory barrier.
+ * The sync instruction guarantees that all memory accesses initiated
+ * by this processor have been performed (with respect to all other
+ * mechanisms that access memory).  The eieio instruction is a barrier
+ * providing an ordering (separately) for (a) cacheable stores and (b)
+ * loads and stores to non-cacheable memory (e.g. I/O devices).
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ * read_barrier_depends() prevents data-dependent loads being reordered
+ *	across this point (nop on PPC).
+ *
+ * We have to use the sync instructions for mb(), since lwsync doesn't
+ * order loads with respect to previous stores.  Lwsync is fine for
+ * rmb(), though. Note that rmb() actually uses a sync on 32-bit
+ * architectures.
+ *
+ * For wmb(), we use sync since wmb is used in drivers to order
+ * stores to system memory with respect to writes to the device.
+ * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
+ * on SMP since it is only used to order updates to system memory.
+ */
+#define mb()   __asm__ __volatile__ ("sync" : : : "memory")
+#define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define read_barrier_depends()  do { } while(0)
+
+#define set_mb(var, value)	do { var = value; mb(); } while (0)
+
+#ifdef __KERNEL__
+#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
+#ifdef CONFIG_SMP
+
+#ifdef __SUBARCH_HAS_LWSYNC
+#    define SMPWMB      lwsync
+#else
+#    define SMPWMB      eieio
+#endif
+
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	__asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif /* CONFIG_SMP */
+
+/*
+ * This is a barrier which prevents following instructions from being
+ * started until the value of the argument x is known.  For example, if
+ * x is a variable loaded from memory, this prevents following
+ * instructions from being executed until the load has been performed.
+ */
+#define data_barrier(x)	\
+	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
+
+struct task_struct;
+struct pt_regs;
+
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+
+extern int (*__debugger)(struct pt_regs *regs);
+extern int (*__debugger_ipi)(struct pt_regs *regs);
+extern int (*__debugger_bpt)(struct pt_regs *regs);
+extern int (*__debugger_sstep)(struct pt_regs *regs);
+extern int (*__debugger_iabr_match)(struct pt_regs *regs);
+extern int (*__debugger_dabr_match)(struct pt_regs *regs);
+extern int (*__debugger_fault_handler)(struct pt_regs *regs);
+
+#define DEBUGGER_BOILERPLATE(__NAME) \
+static inline int __NAME(struct pt_regs *regs) \
+{ \
+	if (unlikely(__ ## __NAME)) \
+		return __ ## __NAME(regs); \
+	return 0; \
+}
+
+DEBUGGER_BOILERPLATE(debugger)
+DEBUGGER_BOILERPLATE(debugger_ipi)
+DEBUGGER_BOILERPLATE(debugger_bpt)
+DEBUGGER_BOILERPLATE(debugger_sstep)
+DEBUGGER_BOILERPLATE(debugger_iabr_match)
+DEBUGGER_BOILERPLATE(debugger_dabr_match)
+DEBUGGER_BOILERPLATE(debugger_fault_handler)
+
+#else
+static inline int debugger(struct pt_regs *regs) { return 0; }
+static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
+static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
+static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
+static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
+#endif
+
+extern int set_dabr(unsigned long dabr);
+extern void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code);
+extern void print_backtrace(unsigned long *);
+extern void show_regs(struct pt_regs * regs);
+extern void flush_instruction_cache(void);
+extern void hard_reset_now(void);
+extern void poweroff_now(void);
+
+#ifdef CONFIG_6xx
+extern long _get_L2CR(void);
+extern long _get_L3CR(void);
+extern void _set_L2CR(unsigned long);
+extern void _set_L3CR(unsigned long);
+#else
+#define _get_L2CR()	0L
+#define _get_L3CR()	0L
+#define _set_L2CR(val)	do { } while(0)
+#define _set_L3CR(val)	do { } while(0)
+#endif
+
+extern void via_cuda_init(void);
+extern void read_rtc_time(void);
+extern void pmac_find_display(void);
+extern void giveup_fpu(struct task_struct *);
+extern void disable_kernel_fp(void);
+extern void enable_kernel_fp(void);
+extern void flush_fp_to_thread(struct task_struct *);
+extern void enable_kernel_altivec(void);
+extern void giveup_altivec(struct task_struct *);
+extern void load_up_altivec(struct task_struct *);
+extern int emulate_altivec(struct pt_regs *);
+extern void __giveup_vsx(struct task_struct *);
+extern void giveup_vsx(struct task_struct *);
+extern void enable_kernel_spe(void);
+extern void giveup_spe(struct task_struct *);
+extern void load_up_spe(struct task_struct *);
+extern int fix_alignment(struct pt_regs *);
+extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
+extern void cvt_df(double *from, float *to, struct thread_struct *thread);
+
+#ifndef CONFIG_SMP
+extern void discard_lazy_cpu_state(void);
+#else
+static inline void discard_lazy_cpu_state(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ALTIVEC
+extern void flush_altivec_to_thread(struct task_struct *);
+#else
+static inline void flush_altivec_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_VSX
+extern void flush_vsx_to_thread(struct task_struct *);
+#else
+static inline void flush_vsx_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_SPE
+extern void flush_spe_to_thread(struct task_struct *);
+#else
+static inline void flush_spe_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+extern int call_rtas(const char *, int, int, unsigned long *, ...);
+extern void cacheable_memzero(void *p, unsigned int nb);
+extern void *cacheable_memcpy(void *, const void *, unsigned int);
+extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
+extern void bad_page_fault(struct pt_regs *, unsigned long, int);
+extern int die(const char *, struct pt_regs *, long);
+extern void _exception(int, struct pt_regs *, int, unsigned long);
+extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+#ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+#endif /* CONFIG_BOOKE_WDT */
+
+struct device_node;
+extern void note_scsi_host(struct device_node *, void *);
+
+extern struct task_struct *__switch_to(struct task_struct *,
+	struct task_struct *);
+#define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
+
+struct thread_struct;
+extern struct task_struct *_switch(struct thread_struct *prev,
+				   struct thread_struct *next);
+
+extern unsigned int rtas_data;
+extern int mem_init_done;	/* set on boot once kmalloc can be called */
+extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
+extern unsigned long memory_limit;
+extern unsigned long klimit;
+
+extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
+extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __always_inline unsigned long
+__xchg_u32(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __always_inline unsigned long
+__xchg_u32_local(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __always_inline unsigned long
+__xchg_u64(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stdcx.	%3,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__xchg_u64_local(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stdcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__xchg(volatile void *ptr, unsigned long x, unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32(ptr, x);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __xchg_u64(ptr, x);
+#endif
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+static __always_inline unsigned long
+__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32_local(ptr, x);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __xchg_u64_local(ptr, x);
+#endif
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+#define xchg(ptr,x)							     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+  })
+
+#define xchg_local(ptr,x)						     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg_local((ptr),				     \
+     		(unsigned long)_x_, sizeof(*(ptr))); 			     \
+  })
+
+/*
+ * Compare and exchange - if *p == old, set it to new,
+ * and return the old value of *p.
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+static __always_inline unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
+			unsigned long new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __always_inline unsigned long
+__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
+			unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+	  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+#endif
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+static __always_inline unsigned long
+__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
+	  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32_local(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64_local(ptr, old, new);
+#endif
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+
+#define cmpxchg_local(ptr, o, n)					 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#ifdef CONFIG_PPC64
+/*
+ * We handle most unaligned accesses in hardware. On the other hand 
+ * unaligned DMA can be very expensive on some ppc64 IO chips (it does
+ * powers of 2 writes until it reaches sufficient alignment).
+ *
+ * Based on this we disable the IP header alignment in network drivers.
+ * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
+ * cacheline alignment of buffers.
+ */
+#define NET_IP_ALIGN	0
+#define NET_SKB_PAD	L1_CACHE_BYTES
+
+#define cmpxchg64(ptr, o, n)						\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+  })
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#include <asm-generic/cmpxchg-local.h>
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+#define arch_align_stack(x) (x)
+
+/* Used in very early kernel initialization. */
+extern unsigned long reloc_offset(void);
+extern unsigned long add_reloc_offset(unsigned long);
+extern void reloc_got2(unsigned long);
+
+#define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_system_vtime(struct task_struct *);
+#endif
+
+extern struct dentry *powerpc_debugfs_root;
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SYSTEM_H */
diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h
new file mode 100644
index 00000000000..f663634cccc
--- /dev/null
+++ b/arch/powerpc/include/asm/tce.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_TCE_H
+#define _ASM_POWERPC_TCE_H
+#ifdef __KERNEL__
+
+#include <asm/iommu.h>
+
+/*
+ * Tces come in two formats, one for the virtual bus and a different
+ * format for PCI
+ */
+#define TCE_VB  0
+#define TCE_PCI 1
+
+/* TCE page size is 4096 bytes (1 << 12) */
+
+#define TCE_SHIFT	12
+#define TCE_PAGE_SIZE	(1 << TCE_SHIFT)
+
+#define TCE_ENTRY_SIZE		8		/* each TCE is 64 bits */
+
+#define TCE_RPN_MASK		0xfffffffffful  /* 40-bit RPN (4K pages) */
+#define TCE_RPN_SHIFT		12
+#define TCE_VALID		0x800		/* TCE valid */
+#define TCE_ALLIO		0x400		/* TCE valid for all lpars */
+#define TCE_PCI_WRITE		0x2		/* write from PCI allowed */
+#define TCE_PCI_READ		0x1		/* read from PCI allowed */
+#define TCE_VB_WRITE		0x1		/* write from VB allowed */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_TCE_H */
diff --git a/arch/powerpc/include/asm/termbits.h b/arch/powerpc/include/asm/termbits.h
new file mode 100644
index 00000000000..6698188ca55
--- /dev/null
+++ b/arch/powerpc/include/asm/termbits.h
@@ -0,0 +1,209 @@
+#ifndef _ASM_POWERPC_TERMBITS_H
+#define _ASM_POWERPC_TERMBITS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+/*
+ * termios type and macro definitions.  Be careful about adding stuff
+ * to this file since it's used in GNU libc and there are strict rules
+ * concerning namespace pollution.
+ */
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* For PowerPC the termios and ktermios are the same */
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 	         0
+#define VQUIT 	         1
+#define VERASE 	         2
+#define VKILL	         3
+#define VEOF	         4
+#define VMIN	         5
+#define VEOL	         6
+#define VTIME	         7
+#define VEOL2	         8
+#define VSWTC	         9
+#define VWERASE 	10
+#define VREPRINT	11
+#define VSUSP 		12
+#define VSTART		13
+#define VSTOP		14
+#define VLNEXT		15
+#define VDISCARD	16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IXON	0001000
+#define IXOFF	0002000
+#define IXANY	0004000
+#define IUCLC	0010000
+#define IMAXBEL	0020000
+#define	IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define ONLCR	0000002
+#define OLCUC	0000004
+
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+
+#define OFILL	00000100
+#define OFDEL	00000200
+#define NLDLY	00001400
+#define   NL0	00000000
+#define   NL1	00000400
+#define   NL2	00001000
+#define   NL3	00001400
+#define TABDLY	00006000
+#define   TAB0	00000000
+#define   TAB1	00002000
+#define   TAB2	00004000
+#define   TAB3	00006000
+#define   XTABS	00006000	/* required by POSIX to == TAB3 */
+#define CRDLY	00030000
+#define   CR0	00000000
+#define   CR1	00010000
+#define   CR2	00020000
+#define   CR3	00030000
+#define FFDLY	00040000
+#define   FF0	00000000
+#define   FF1	00040000
+#define BSDLY	00100000
+#define   BS0	00000000
+#define   BS1	00100000
+#define VTDLY	00200000
+#define   VT0	00000000
+#define   VT1	00200000
+
+/* c_cflag bit meaning */
+#define CBAUD	0000377
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define  EXTA   B19200
+#define  EXTB   B38400
+#define  CBAUDEX 0000000
+#define  B57600   00020
+#define  B115200  00021
+#define  B230400  00022
+#define  B460800  00023
+#define  B500000  00024
+#define  B576000  00025
+#define  B921600  00026
+#define B1000000  00027
+#define B1152000  00030
+#define B1500000  00031
+#define B2000000  00032
+#define B2500000  00033
+#define B3000000  00034
+#define B3500000  00035
+#define B4000000  00036
+#define   BOTHER  00037
+
+#define CIBAUD	077600000
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+#define CSIZE	00001400
+#define   CS5	00000000
+#define   CS6	00000400
+#define   CS7	00001000
+#define   CS8	00001400
+
+#define CSTOPB	00002000
+#define CREAD	00004000
+#define PARENB	00010000
+#define PARODD	00020000
+#define HUPCL	00040000
+
+#define CLOCAL	00100000
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000080
+#define ICANON	0x00000100
+#define XCASE	0x00004000
+#define ECHO	0x00000008
+#define ECHOE	0x00000002
+#define ECHOK	0x00000004
+#define ECHONL	0x00000010
+#define NOFLSH	0x80000000
+#define TOSTOP	0x00400000
+#define ECHOCTL	0x00000040
+#define ECHOPRT	0x00000020
+#define ECHOKE	0x00000001
+#define FLUSHO	0x00800000
+#define PENDIN	0x20000000
+#define IEXTEN	0x00000400
+
+/* Values for the ACTION argument to `tcflow'.  */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif	/* _ASM_POWERPC_TERMBITS_H */
diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h
new file mode 100644
index 00000000000..2c14fea07c8
--- /dev/null
+++ b/arch/powerpc/include/asm/termios.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_POWERPC_TERMIOS_H
+#define _ASM_POWERPC_TERMIOS_H
+
+/*
+ * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
+ * fields have been reordered so that termio & termios share the
+ * common subset in the same order (for brain dead programs that don't
+ * know or care about the differences).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 10
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* c_cc characters */
+#define _VINTR	0
+#define _VQUIT	1
+#define _VERASE	2
+#define _VKILL	3
+#define _VEOF	4
+#define _VMIN	5
+#define _VEOL	6
+#define _VTIME	7
+#define _VEOL2	8
+#define _VSWTC	9
+
+#ifdef __KERNEL__
+/*                   ^C  ^\ del  ^U  ^D   1   0   0   0   0  ^W  ^R  ^Z  ^Q  ^S  ^V  ^U  */
+#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" 
+#endif
+
+#ifdef __KERNEL__
+
+#include <asm-generic/termios.h>
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _ASM_POWERPC_TERMIOS_H */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
new file mode 100644
index 00000000000..9665a26a253
--- /dev/null
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -0,0 +1,161 @@
+/* thread_info.h: PowerPC low-level thread information
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_POWERPC_THREAD_INFO_H
+#define _ASM_POWERPC_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/* We have 8k stacks on ppc32 and 16k on ppc64 */
+
+#ifdef CONFIG_PPC64
+#define THREAD_SHIFT		14
+#else
+#define THREAD_SHIFT		13
+#endif
+
+#define THREAD_SIZE		(1 << THREAD_SHIFT)
+
+#ifndef __ASSEMBLY__
+#include <linux/cache.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/stringify.h>
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	int		cpu;			/* cpu we're on */
+	int		preempt_count;		/* 0 => preemptable,
+						   <0 => BUG */
+	struct restart_block restart_block;
+	unsigned long	local_flags;		/* private flags for thread */
+
+	/* low level flags - has atomic operations done on it */
+	unsigned long	flags ____cacheline_aligned_in_smp;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+	.flags =	0,			\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* thread information allocation */
+
+#if THREAD_SHIFT >= PAGE_SHIFT
+
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
+
+#else /* THREAD_SHIFT < PAGE_SHIFT */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
+extern void free_thread_info(struct thread_info *ti);
+
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm("r1");
+
+	/* gcc4, at least, is smart enough to turn this into a single
+	 * rlwinm for ppc32 and clrrdi for ppc64 */
+	return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_32BIT		4	/* 32 bit binary */
+#define TIF_PERFMON_WORK	5	/* work for pfm_handle_work() */
+#define TIF_PERFMON_CTXSW	6	/* perfmon needs ctxsw calls */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
+#define TIF_SINGLESTEP		8	/* singlestepping active */
+#define TIF_MEMDIE		9
+#define TIF_SECCOMP		10	/* secure computing */
+#define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
+#define TIF_NOERROR		12	/* Force successful syscall return */
+#define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
+#define TIF_FREEZE		14	/* Freezing for suspend */
+#define TIF_RUNLATCH		15	/* Is the runlatch enabled? */
+#define TIF_ABI_PENDING		16	/* 32/64 bit switch needed */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_PERFMON_WORK	(1<<TIF_PERFMON_WORK)
+#define _TIF_PERFMON_CTXSW	(1<<TIF_PERFMON_CTXSW)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
+#define _TIF_NOERROR		(1<<TIF_NOERROR)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
+
+#define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+				 _TIF_NOTIFY_RESUME)
+#define _TIF_PERSYSCALL_MASK	(_TIF_RESTOREALL|_TIF_NOERROR)
+
+/* Bits in local_flags */
+/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
+#define TLF_NAPPING		0	/* idle thread enabled NAP mode */
+#define TLF_SLEEPING		1	/* suspend code enabled SLEEP mode */
+#define TLF_RESTORE_SIGMASK	2	/* Restore signal mask in do_signal */
+
+#define _TLF_NAPPING		(1 << TLF_NAPPING)
+#define _TLF_SLEEPING		(1 << TLF_SLEEPING)
+#define _TLF_RESTORE_SIGMASK	(1 << TLF_RESTORE_SIGMASK)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->local_flags |= _TLF_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_THREAD_INFO_H */
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
new file mode 100644
index 00000000000..febd581ec9b
--- /dev/null
+++ b/arch/powerpc/include/asm/time.h
@@ -0,0 +1,255 @@
+/*
+ * Common time prototypes and such for all ppc machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __POWERPC_TIME_H
+#define __POWERPC_TIME_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+#include <asm/processor.h>
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/paca.h>
+#include <asm/firmware.h>
+#include <asm/iseries/hv_call.h>
+#endif
+
+/* time.c */
+extern unsigned long tb_ticks_per_jiffy;
+extern unsigned long tb_ticks_per_usec;
+extern unsigned long tb_ticks_per_sec;
+extern u64 tb_to_xs;
+extern unsigned      tb_to_us;
+
+struct rtc_time;
+extern void to_tm(int tim, struct rtc_time * tm);
+extern void GregorianDay(struct rtc_time *tm);
+extern time_t last_rtc_update;
+
+extern void generic_calibrate_decr(void);
+extern void wakeup_decrementer(void);
+extern void snapshot_timebase(void);
+
+extern void set_dec_cpu6(unsigned int val);
+
+/* Some sane defaults: 125 MHz timebase, 1GHz processor */
+extern unsigned long ppc_proc_freq;
+#define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
+extern unsigned long ppc_tb_freq;
+#define DEFAULT_TB_FREQ		125000000UL
+
+/*
+ * By putting all of this stuff into a single struct we 
+ * reduce the number of cache lines touched by do_gettimeofday.
+ * Both by collecting all of the data in one cache line and
+ * by touching only one TOC entry on ppc64.
+ */
+struct gettimeofday_vars {
+	u64 tb_to_xs;
+	u64 stamp_xsec;
+	u64 tb_orig_stamp;
+};
+
+struct gettimeofday_struct {
+	unsigned long tb_ticks_per_sec;
+	struct gettimeofday_vars vars[2];
+	struct gettimeofday_vars * volatile varp;
+	unsigned      var_idx;
+	unsigned      tb_to_us;
+};
+
+struct div_result {
+	u64 result_high;
+	u64 result_low;
+};
+
+/* Accessor functions for the timebase (RTC on 601) registers. */
+/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
+#ifdef CONFIG_6xx
+#define __USE_RTC()	(!cpu_has_feature(CPU_FTR_USE_TB))
+#else
+#define __USE_RTC()	0
+#endif
+
+#ifdef CONFIG_PPC64
+
+/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */
+#define get_tbl		get_tb
+
+#else
+
+static inline unsigned long get_tbl(void)
+{
+#if defined(CONFIG_403GCX)
+	unsigned long tbl;
+	asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
+	return tbl;
+#else
+	return mftbl();
+#endif
+}
+
+static inline unsigned int get_tbu(void)
+{
+#ifdef CONFIG_403GCX
+	unsigned int tbu;
+	asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
+	return tbu;
+#else
+	return mftbu();
+#endif
+}
+#endif /* !CONFIG_PPC64 */
+
+static inline unsigned int get_rtcl(void)
+{
+	unsigned int rtcl;
+
+	asm volatile("mfrtcl %0" : "=r" (rtcl));
+	return rtcl;
+}
+
+static inline u64 get_rtc(void)
+{
+	unsigned int hi, lo, hi2;
+
+	do {
+		asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2"
+			     : "=r" (hi), "=r" (lo), "=r" (hi2));
+	} while (hi2 != hi);
+	return (u64)hi * 1000000000 + lo;
+}
+
+#ifdef CONFIG_PPC64
+static inline u64 get_tb(void)
+{
+	return mftb();
+}
+#else /* CONFIG_PPC64 */
+static inline u64 get_tb(void)
+{
+	unsigned int tbhi, tblo, tbhi2;
+
+	do {
+		tbhi = get_tbu();
+		tblo = get_tbl();
+		tbhi2 = get_tbu();
+	} while (tbhi != tbhi2);
+
+	return ((u64)tbhi << 32) | tblo;
+}
+#endif /* !CONFIG_PPC64 */
+
+static inline u64 get_tb_or_rtc(void)
+{
+	return __USE_RTC() ? get_rtc() : get_tb();
+}
+
+static inline void set_tb(unsigned int upper, unsigned int lower)
+{
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, upper);
+	mtspr(SPRN_TBWL, lower);
+}
+
+/* Accessor functions for the decrementer register.
+ * The 4xx doesn't even have a decrementer.  I tried to use the
+ * generic timer interrupt code, which seems OK, with the 4xx PIT
+ * in auto-reload mode.  The problem is PIT stops counting when it
+ * hits zero.  If it would wrap, we could use it just like a decrementer.
+ */
+static inline unsigned int get_dec(void)
+{
+#if defined(CONFIG_40x)
+	return (mfspr(SPRN_PIT));
+#else
+	return (mfspr(SPRN_DEC));
+#endif
+}
+
+/*
+ * Note: Book E and 4xx processors differ from other PowerPC processors
+ * in when the decrementer generates its interrupt: on the 1 to 0
+ * transition for Book E/4xx, but on the 0 to -1 transition for others.
+ */
+static inline void set_dec(int val)
+{
+#if defined(CONFIG_40x)
+	mtspr(SPRN_PIT, val);
+#elif defined(CONFIG_8xx_CPU6)
+	set_dec_cpu6(val - 1);
+#else
+#ifndef CONFIG_BOOKE
+	--val;
+#endif
+#ifdef CONFIG_PPC_ISERIES
+	if (firmware_has_feature(FW_FEATURE_ISERIES) &&
+			get_lppaca()->shared_proc) {
+		get_lppaca()->virtual_decr = val;
+		if (get_dec() > val)
+			HvCall_setVirtualDecr();
+		return;
+	}
+#endif
+	mtspr(SPRN_DEC, val);
+#endif /* not 40x or 8xx_CPU6 */
+}
+
+static inline unsigned long tb_ticks_since(unsigned long tstamp)
+{
+	if (__USE_RTC()) {
+		int delta = get_rtcl() - (unsigned int) tstamp;
+		return delta < 0 ? delta + 1000000000 : delta;
+	}
+	return get_tbl() - tstamp;
+}
+
+#define mulhwu(x,y) \
+({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+
+#ifdef CONFIG_PPC64
+#define mulhdu(x,y) \
+({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+#else
+extern u64 mulhdu(u64, u64);
+#endif
+
+extern void smp_space_timers(unsigned int);
+
+extern unsigned mulhwu_scale_factor(unsigned, unsigned);
+extern void div128_by_32(u64 dividend_high, u64 dividend_low,
+			 unsigned divisor, struct div_result *dr);
+
+/* Used to store Processor Utilization register (purr) values */
+
+struct cpu_usage {
+        u64 current_tb;  /* Holds the current purr register values */
+};
+
+DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
+
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING)
+extern void calculate_steal_time(void);
+extern void snapshot_timebases(void);
+#define account_process_vtime(tsk)		account_process_tick(tsk, 0)
+#else
+#define calculate_steal_time()			do { } while (0)
+#define snapshot_timebases()			do { } while (0)
+#define account_process_vtime(tsk)		do { } while (0)
+#endif
+
+extern void secondary_cpu_time_init(void);
+extern void iSeries_time_init_early(void);
+
+#endif /* __KERNEL__ */
+#endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
new file mode 100644
index 00000000000..c55e14f7ef4
--- /dev/null
+++ b/arch/powerpc/include/asm/timex.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_POWERPC_TIMEX_H
+#define _ASM_POWERPC_TIMEX_H
+
+#ifdef __KERNEL__
+
+/*
+ * PowerPC architecture timex specifications
+ */
+
+#include <asm/cputable.h>
+#include <asm/reg.h>
+
+#define CLOCK_TICK_RATE	1024000 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+#ifdef __powerpc64__
+	return mftb();
+#else
+	cycles_t ret;
+
+	/*
+	 * For the "cycle" counter we use the timebase lower half.
+	 * Currently only used on SMP.
+	 */
+
+	ret = 0;
+
+	__asm__ __volatile__(
+		"97:	mftb %0\n"
+		"99:\n"
+		".section __ftr_fixup,\"a\"\n"
+		".align 2\n"
+		"98:\n"
+		"	.long %1\n"
+		"	.long 0\n"
+		"	.long 97b-98b\n"
+		"	.long 99b-98b\n"
+		"	.long 0\n"
+		"	.long 0\n"
+		".previous"
+		: "=r" (ret) : "i" (CPU_FTR_601));
+	return ret;
+#endif
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_TIMEX_H */
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
new file mode 100644
index 00000000000..e20ff7541f3
--- /dev/null
+++ b/arch/powerpc/include/asm/tlb.h
@@ -0,0 +1,81 @@
+/*
+ *	TLB shootdown specifics for powerpc
+ *
+ * Copyright (C) 2002 Anton Blanchard, IBM Corp.
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_TLB_H
+#define _ASM_POWERPC_TLB_H
+#ifdef __KERNEL__
+
+#ifndef __powerpc64__
+#include <asm/pgtable.h>
+#endif
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#ifndef __powerpc64__
+#include <asm/page.h>
+#include <asm/mmu.h>
+#endif
+
+#include <linux/pagemap.h>
+
+struct mmu_gather;
+
+#define tlb_start_vma(tlb, vma)	do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+#if !defined(CONFIG_PPC_STD_MMU)
+
+#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
+
+#elif defined(__powerpc64__)
+
+extern void pte_free_finish(void);
+
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+	struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
+
+	/* If there's a TLB batch pending, then we must flush it because the
+	 * pages are going to be freed and we really don't want to have a CPU
+	 * access a freed page because it has a stale TLB
+	 */
+	if (tlbbatch->index)
+		__flush_tlb_pending(tlbbatch);
+
+	pte_free_finish();
+}
+
+#else
+
+extern void tlb_flush(struct mmu_gather *tlb);
+
+#endif
+
+/* Get the generic bits... */
+#include <asm-generic/tlb.h>
+
+#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+
+#else
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+			     unsigned long address);
+
+static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
+					unsigned long address)
+{
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(tlb->mm, ptep, address);
+}
+
+#endif
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_TLB_H */
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
new file mode 100644
index 00000000000..361cd5c7a32
--- /dev/null
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -0,0 +1,166 @@
+#ifndef _ASM_POWERPC_TLBFLUSH_H
+#define _ASM_POWERPC_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+
+#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
+/*
+ * TLB flushing for software loaded TLB chips
+ *
+ * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
+ * flush_tlb_kernel_range are best implemented as tlbia vs
+ * specific tlbie's
+ */
+
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address, unsigned int pid);
+
+#if defined(CONFIG_40x) || defined(CONFIG_8xx)
+#define _tlbia()	asm volatile ("tlbia; sync" : : : "memory")
+#else /* CONFIG_44x || CONFIG_FSL_BOOKE */
+extern void _tlbia(void);
+#endif
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	_tlbia();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	_tlbia();
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	_tlbia();
+}
+
+#elif defined(CONFIG_PPC32)
+/*
+ * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx
+ */
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#else
+/*
+ * TLB flushing for 64-bit has-MMU CPUs
+ */
+
+#include <linux/percpu.h>
+#include <asm/page.h>
+
+#define PPC64_TLB_BATCH_NR 192
+
+struct ppc64_tlb_batch {
+	int			active;
+	unsigned long		index;
+	struct mm_struct	*mm;
+	real_pte_t		pte[PPC64_TLB_BATCH_NR];
+	unsigned long		vaddr[PPC64_TLB_BATCH_NR];
+	unsigned int		psize;
+	int			ssize;
+};
+DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
+extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
+
+extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, unsigned long pte, int huge);
+
+#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+
+	batch->active = 1;
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+
+	if (batch->index)
+		__flush_tlb_pending(batch);
+	batch->active = 0;
+}
+
+#define arch_flush_lazy_mmu_mode()      do {} while (0)
+
+
+extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
+			    int ssize, int local);
+extern void flush_hash_range(unsigned long number, int local);
+
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+}
+
+/* Private function for use by PCI IO mapping code */
+extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
+				     unsigned long end);
+
+
+#endif
+
+#endif /*__KERNEL__ */
+#endif /* _ASM_POWERPC_TLBFLUSH_H */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
new file mode 100644
index 00000000000..c32da6f9799
--- /dev/null
+++ b/arch/powerpc/include/asm/topology.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_TOPOLOGY_H
+#define _ASM_POWERPC_TOPOLOGY_H
+#ifdef __KERNEL__
+
+
+struct sys_device;
+struct device_node;
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mmzone.h>
+
+static inline int cpu_to_node(int cpu)
+{
+	return numa_cpu_lookup_table[cpu];
+}
+
+#define parent_node(node)	(node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return numa_cpumask_lookup_table[node];
+}
+
+static inline int node_to_first_cpu(int node)
+{
+	cpumask_t tmp;
+	tmp = node_to_cpumask(node);
+	return first_cpu(tmp);
+}
+
+int of_node_to_nid(struct device_node *device);
+
+struct pci_bus;
+#ifdef CONFIG_PCI
+extern int pcibus_to_node(struct pci_bus *bus);
+#else
+static inline int pcibus_to_node(struct pci_bus *bus)
+{
+	return -1;
+}
+#endif
+
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+
+/* sched_domains SD_NODE_INIT for PPC64 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 1,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 1,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_IDLE		\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+extern void __init dump_numa_cpu_topology(void);
+
+extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
+extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
+
+#else
+
+static inline int of_node_to_nid(struct device_node *device)
+{
+	return 0;
+}
+
+static inline void dump_numa_cpu_topology(void) {}
+
+static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_device_from_node(struct sys_device *dev,
+						int nid)
+{
+}
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#ifdef CONFIG_SMP
+#include <asm/cputable.h>
+#define smt_capable()		(cpu_has_feature(CPU_FTR_SMT))
+
+#ifdef CONFIG_PPC64
+#include <asm/smp.h>
+
+#define topology_thread_siblings(cpu)	(per_cpu(cpu_sibling_map, cpu))
+#define topology_core_siblings(cpu)	(per_cpu(cpu_core_map, cpu))
+#define topology_core_id(cpu)		(cpu_to_core_id(cpu))
+#endif
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_TOPOLOGY_H */
diff --git a/arch/powerpc/include/asm/tsi108.h b/arch/powerpc/include/asm/tsi108.h
new file mode 100644
index 00000000000..f8b60793b7a
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108.h
@@ -0,0 +1,121 @@
+/*
+ * common routine and memory layout for Tundra TSI108(Grendel) host bridge
+ * memory controller.
+ *
+ * Author: Jacob Pan (jacob.pan@freescale.com)
+ *	   Alex Bounine (alexandreb@tundra.com)
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __PPC_KERNEL_TSI108_H
+#define __PPC_KERNEL_TSI108_H
+
+#include <asm/pci-bridge.h>
+
+/* Size of entire register space */
+#define TSI108_REG_SIZE		(0x10000)
+
+/* Sizes of register spaces for individual blocks */
+#define TSI108_HLP_SIZE		0x1000
+#define TSI108_PCI_SIZE		0x1000
+#define TSI108_CLK_SIZE		0x1000
+#define TSI108_PB_SIZE		0x1000
+#define TSI108_SD_SIZE		0x1000
+#define TSI108_DMA_SIZE		0x1000
+#define TSI108_ETH_SIZE		0x1000
+#define TSI108_I2C_SIZE		0x400
+#define TSI108_MPIC_SIZE	0x400
+#define TSI108_UART0_SIZE	0x200
+#define TSI108_GPIO_SIZE	0x200
+#define TSI108_UART1_SIZE	0x200
+
+/* Offsets within Tsi108(A) CSR space for individual blocks */
+#define TSI108_HLP_OFFSET	0x0000
+#define TSI108_PCI_OFFSET	0x1000
+#define TSI108_CLK_OFFSET	0x2000
+#define TSI108_PB_OFFSET	0x3000
+#define TSI108_SD_OFFSET	0x4000
+#define TSI108_DMA_OFFSET	0x5000
+#define TSI108_ETH_OFFSET	0x6000
+#define TSI108_I2C_OFFSET	0x7000
+#define TSI108_MPIC_OFFSET	0x7400
+#define TSI108_UART0_OFFSET	0x7800
+#define TSI108_GPIO_OFFSET	0x7A00
+#define TSI108_UART1_OFFSET	0x7C00
+
+/* Tsi108 registers used by common code components */
+#define TSI108_PCI_CSR		(0x004)
+#define TSI108_PCI_IRP_CFG_CTL	(0x180)
+#define TSI108_PCI_IRP_STAT	(0x184)
+#define TSI108_PCI_IRP_ENABLE	(0x188)
+#define TSI108_PCI_IRP_INTAD	(0x18C)
+
+#define TSI108_PCI_IRP_STAT_P_INT	(0x00400000)
+#define TSI108_PCI_IRP_ENABLE_P_INT	(0x00400000)
+
+#define TSI108_CG_PWRUP_STATUS	(0x234)
+
+#define TSI108_PB_ISR		(0x00C)
+#define TSI108_PB_ERRCS		(0x404)
+#define TSI108_PB_AERR		(0x408)
+
+#define TSI108_PB_ERRCS_ES		(1 << 1)
+#define TSI108_PB_ISR_PBS_RD_ERR	(1 << 8)
+
+#define TSI108_PCI_CFG_SIZE		(0x01000000)
+
+/*
+ * PHY Configuration Options
+ *
+ * Specify "bcm54xx" in the compatible property of your device tree phy
+ * nodes if your board uses the Broadcom PHYs
+ */
+#define TSI108_PHY_MV88E	0	/* Marvel 88Exxxx PHY */
+#define TSI108_PHY_BCM54XX	1	/* Broardcom BCM54xx PHY */
+
+/* Global variables */
+
+extern u32 tsi108_pci_cfg_base;
+/* Exported functions */
+
+extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
+extern unsigned long tsi108_get_mem_size(void);
+extern unsigned long tsi108_get_cpu_clk(void);
+extern unsigned long tsi108_get_sdc_clk(void);
+extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
+				      int offset, int len, u32 val);
+extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 * val);
+extern void tsi108_clear_pci_error(u32 pci_cfg_base);
+
+extern phys_addr_t get_csrbase(void);
+
+typedef struct {
+	u32 regs;		/* hw registers base address */
+	u32 phyregs;		/* phy registers base address */
+	u16 phy;		/* phy address */
+	u16 irq_num;		/* irq number */
+	u8 mac_addr[6];		/* phy mac address */
+	u16 phy_type;	/* type of phy on board */
+} hw_info;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_csr_vir_base;
+
+static inline u32 tsi108_read_reg(u32 reg_offset)
+{
+	return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
+}
+
+static inline void tsi108_write_reg(u32 reg_offset, u32 val)
+{
+	out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
+}
+
+#endif				/* __PPC_KERNEL_TSI108_H */
diff --git a/arch/powerpc/include/asm/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h
new file mode 100644
index 00000000000..6ed93979fbe
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108_irq.h
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2005 Tundra Semiconductor Corp.
+ * Alex Bounine, <alexandreb at tundra.com).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * definitions for interrupt controller initialization and external interrupt
+ * demultiplexing on TSI108EMU/SVB boards.
+ */
+
+#ifndef _ASM_POWERPC_TSI108_IRQ_H
+#define _ASM_POWERPC_TSI108_IRQ_H
+
+/*
+ * Tsi108 interrupts
+ */
+#ifndef TSI108_IRQ_REG_BASE
+#define TSI108_IRQ_REG_BASE		0
+#endif
+
+#define TSI108_IRQ(x)		(TSI108_IRQ_REG_BASE + (x))
+
+#define TSI108_MAX_VECTORS	(36 + 4)	/* 36 sources + PCI INT demux */
+#define MAX_TASK_PRIO	0xF
+
+#define TSI108_IRQ_SPURIOUS	(TSI108_MAX_VECTORS)
+
+#define DEFAULT_PRIO_LVL	10	/* initial priority level */
+
+/* Interrupt vectors assignment to external and internal
+ * sources of requests. */
+
+/* EXTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_EXT_INT0	TSI108_IRQ(0)	/* External Source at INT[0] */
+#define IRQ_TSI108_EXT_INT1	TSI108_IRQ(1)	/* External Source at INT[1] */
+#define IRQ_TSI108_EXT_INT2	TSI108_IRQ(2)	/* External Source at INT[2] */
+#define IRQ_TSI108_EXT_INT3	TSI108_IRQ(3)	/* External Source at INT[3] */
+
+/* INTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_RESERVED0	TSI108_IRQ(4)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED1	TSI108_IRQ(5)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED2	TSI108_IRQ(6)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED3	TSI108_IRQ(7)	/* Reserved IRQ */
+#define IRQ_TSI108_DMA0		TSI108_IRQ(8)	/* DMA0 */
+#define IRQ_TSI108_DMA1		TSI108_IRQ(9)	/* DMA1 */
+#define IRQ_TSI108_DMA2		TSI108_IRQ(10)	/* DMA2 */
+#define IRQ_TSI108_DMA3		TSI108_IRQ(11)	/* DMA3 */
+#define IRQ_TSI108_UART0	TSI108_IRQ(12)	/* UART0 */
+#define IRQ_TSI108_UART1	TSI108_IRQ(13)	/* UART1 */
+#define IRQ_TSI108_I2C		TSI108_IRQ(14)	/* I2C */
+#define IRQ_TSI108_GPIO		TSI108_IRQ(15)	/* GPIO */
+#define IRQ_TSI108_GIGE0	TSI108_IRQ(16)	/* GIGE0 */
+#define IRQ_TSI108_GIGE1	TSI108_IRQ(17)	/* GIGE1 */
+#define IRQ_TSI108_RESERVED4	TSI108_IRQ(18)	/* Reserved IRQ */
+#define IRQ_TSI108_HLP		TSI108_IRQ(19)	/* HLP */
+#define IRQ_TSI108_SDRAM	TSI108_IRQ(20)	/* SDC */
+#define IRQ_TSI108_PROC_IF	TSI108_IRQ(21)	/* Processor IF */
+#define IRQ_TSI108_RESERVED5	TSI108_IRQ(22)	/* Reserved IRQ */
+#define IRQ_TSI108_PCI		TSI108_IRQ(23)	/* PCI/X block */
+
+#define IRQ_TSI108_MBOX0	TSI108_IRQ(24)	/* Mailbox 0 register */
+#define IRQ_TSI108_MBOX1	TSI108_IRQ(25)	/* Mailbox 1 register */
+#define IRQ_TSI108_MBOX2	TSI108_IRQ(26)	/* Mailbox 2 register */
+#define IRQ_TSI108_MBOX3	TSI108_IRQ(27)	/* Mailbox 3 register */
+
+#define IRQ_TSI108_DBELL0	TSI108_IRQ(28)	/* Doorbell 0 */
+#define IRQ_TSI108_DBELL1	TSI108_IRQ(29)	/* Doorbell 1 */
+#define IRQ_TSI108_DBELL2	TSI108_IRQ(30)	/* Doorbell 2 */
+#define IRQ_TSI108_DBELL3	TSI108_IRQ(31)	/* Doorbell 3 */
+
+#define IRQ_TSI108_TIMER0	TSI108_IRQ(32)	/* Global Timer 0 */
+#define IRQ_TSI108_TIMER1	TSI108_IRQ(33)	/* Global Timer 1 */
+#define IRQ_TSI108_TIMER2	TSI108_IRQ(34)	/* Global Timer 2 */
+#define IRQ_TSI108_TIMER3	TSI108_IRQ(35)	/* Global Timer 3 */
+
+/*
+ * PCI bus INTA# - INTD# lines demultiplexor
+ */
+#define IRQ_PCI_INTAD_BASE	TSI108_IRQ(36)
+#define IRQ_PCI_INTA		(IRQ_PCI_INTAD_BASE + 0)
+#define IRQ_PCI_INTB		(IRQ_PCI_INTAD_BASE + 1)
+#define IRQ_PCI_INTC		(IRQ_PCI_INTAD_BASE + 2)
+#define IRQ_PCI_INTD		(IRQ_PCI_INTAD_BASE + 3)
+#define NUM_PCI_IRQS		(4)
+
+/* number of entries in vector dispatch table */
+#define IRQ_TSI108_TAB_SIZE	(TSI108_MAX_VECTORS + 1)
+
+/* Mapping of MPIC outputs to processors' interrupt pins */
+
+#define IDIR_INT_OUT0		0x1
+#define IDIR_INT_OUT1		0x2
+#define IDIR_INT_OUT2		0x4
+#define IDIR_INT_OUT3		0x8
+
+/*---------------------------------------------------------------
+ * IRQ line configuration parameters */
+
+/* Interrupt delivery modes */
+typedef enum {
+	TSI108_IRQ_DIRECTED,
+	TSI108_IRQ_DISTRIBUTED,
+} TSI108_IRQ_MODE;
+#endif				/*  _ASM_POWERPC_TSI108_IRQ_H */
diff --git a/arch/powerpc/include/asm/tsi108_pci.h b/arch/powerpc/include/asm/tsi108_pci.h
new file mode 100644
index 00000000000..5653d7cc3e2
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108_pci.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2007 IBM Corp
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_TSI108_PCI_H
+#define _ASM_POWERPC_TSI108_PCI_H
+
+#include <asm/tsi108.h>
+
+/* Register definitions */
+#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10)
+#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14)
+#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18)
+#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c)
+#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c)
+#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204)
+#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208)
+#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c)
+#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210)
+#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214)
+#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220)
+#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230)
+
+extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary);
+extern void tsi108_pci_int_init(struct device_node *node);
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
+extern void tsi108_clear_pci_cfg_error(void);
+
+#endif				/*  _ASM_POWERPC_TSI108_PCI_H */
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
new file mode 100644
index 00000000000..d3374bc865b
--- /dev/null
+++ b/arch/powerpc/include/asm/types.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_TYPES_H
+#define _ASM_POWERPC_TYPES_H
+
+#ifdef __powerpc64__
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __powerpc64__
+typedef unsigned int umode_t;
+#else
+typedef unsigned short umode_t;
+#endif
+
+typedef struct {
+	__u32 u[4];
+} __attribute__((aligned(16))) __vector128;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __powerpc64__
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef __vector128 vector128;
+
+/* Physical address used by some IO functions */
+#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
+typedef u64 phys_addr_t;
+#else
+typedef u32 phys_addr_t;
+#endif
+
+#ifdef __powerpc64__
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+typedef struct {
+	unsigned long entry;
+	unsigned long toc;
+	unsigned long env;
+} func_descr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_TYPES_H */
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
new file mode 100644
index 00000000000..bd0fb849515
--- /dev/null
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -0,0 +1,496 @@
+#ifndef _ARCH_POWERPC_UACCESS_H
+#define _ARCH_POWERPC_UACCESS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/asm-compat.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * The fs/ds values are now the highest legal address in the "segment".
+ * This simplifies the checking in the routines below.
+ */
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(~0UL)
+#ifdef __powerpc64__
+/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE_USER64 - 1)
+#else
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE - 1)
+#endif
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.fs)
+#define set_fs(val)	(current->thread.fs = (val))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+#ifdef __powerpc64__
+/*
+ * This check is sufficient because there is a large enough
+ * gap between user addresses and the kernel addresses
+ */
+#define __access_ok(addr, size, segment)	\
+	(((addr) <= (segment).seg) && ((size) <= (segment).seg))
+
+#else
+
+#define __access_ok(addr, size, segment)	\
+	(((addr) <= (segment).seg) &&		\
+	 (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr)))))
+
+#endif
+
+#define access_ok(type, addr, size)		\
+	(__chk_user_ptr(addr),			\
+	 __access_ok((__force unsigned long)(addr), (size), get_fs()))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	unsigned long insn;
+	unsigned long fixup;
+};
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ *
+ * The "user64" versions of the user access functions are versions that
+ * allow access of 64-bit data. The "get_user" functions do not
+ * properly handle 64-bit data because the value gets down cast to a long.
+ * The "put_user" functions already handle 64-bit data properly but we add
+ * "user64" versions for completeness
+ */
+#define get_user(x, ptr) \
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+#define put_user(x, ptr) \
+	__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user(x, ptr) \
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#ifndef __powerpc64__
+#define __get_user64(x, ptr) \
+	__get_user64_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user64(x, ptr) __put_user(x, ptr)
+#endif
+
+#define __get_user_inatomic(x, ptr) \
+	__get_user_nosleep((x), (ptr), sizeof(*(ptr)))
+#define __put_user_inatomic(x, ptr) \
+	__put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+extern long __put_user_bad(void);
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op)			\
+	__asm__ __volatile__(					\
+		"1:	" op " %1,0(%2)	# put_user\n"		\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	li %0,%3\n"				\
+		"	b 2b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+			PPC_LONG_ALIGN "\n"			\
+			PPC_LONG "1b,3b\n"			\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifdef __powerpc64__
+#define __put_user_asm2(x, ptr, retval)				\
+	  __put_user_asm(x, ptr, retval, "std")
+#else /* __powerpc64__ */
+#define __put_user_asm2(x, addr, err)				\
+	__asm__ __volatile__(					\
+		"1:	stw %1,0(%2)\n"				\
+		"2:	stw %1+1,4(%2)\n"			\
+		"3:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"4:	li %0,%3\n"				\
+		"	b 3b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+			PPC_LONG_ALIGN "\n"			\
+			PPC_LONG "1b,4b\n"			\
+			PPC_LONG "2b,4b\n"			\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+#endif /* __powerpc64__ */
+
+#define __put_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	  case 1: __put_user_asm(x, ptr, retval, "stb"); break;	\
+	  case 2: __put_user_asm(x, ptr, retval, "sth"); break;	\
+	  case 4: __put_user_asm(x, ptr, retval, "stw"); break;	\
+	  case 8: __put_user_asm2(x, ptr, retval); break;	\
+	  default: __put_user_bad();				\
+	}							\
+} while (0)
+
+#define __put_user_nocheck(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	if (!is_kernel_addr((unsigned long)__pu_addr))		\
+		might_sleep();					\
+	__chk_user_ptr(ptr);					\
+	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	might_sleep();							\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size))			\
+		__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;							\
+})
+
+#define __put_user_nosleep(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__chk_user_ptr(ptr);					\
+	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+
+extern long __get_user_bad(void);
+
+#define __get_user_asm(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)	# get_user\n"	\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	b 2b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,3b\n"		\
+		".previous"				\
+		: "=r" (err), "=r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifdef __powerpc64__
+#define __get_user_asm2(x, addr, err)			\
+	__get_user_asm(x, addr, err, "ld")
+#else /* __powerpc64__ */
+#define __get_user_asm2(x, addr, err)			\
+	__asm__ __volatile__(				\
+		"1:	lwz %1,0(%2)\n"			\
+		"2:	lwz %1+1,4(%2)\n"		\
+		"3:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"4:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	li %1+1,0\n"			\
+		"	b 3b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,4b\n"		\
+			PPC_LONG "2b,4b\n"		\
+		".previous"				\
+		: "=r" (err), "=&r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+#endif /* __powerpc64__ */
+
+#define __get_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	__chk_user_ptr(ptr);					\
+	if (size > sizeof(x))					\
+		(x) = __get_user_bad();				\
+	switch (size) {						\
+	case 1: __get_user_asm(x, ptr, retval, "lbz"); break;	\
+	case 2: __get_user_asm(x, ptr, retval, "lhz"); break;	\
+	case 4: __get_user_asm(x, ptr, retval, "lwz"); break;	\
+	case 8: __get_user_asm2(x, ptr, retval);  break;	\
+	default: (x) = __get_user_bad();			\
+	}							\
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	if (!is_kernel_addr((unsigned long)__gu_addr))		\
+		might_sleep();					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#ifndef __powerpc64__
+#define __get_user64_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	long long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	if (!is_kernel_addr((unsigned long)__gu_addr))		\
+		might_sleep();					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+#endif /* __powerpc64__ */
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long  __gu_val = 0;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	might_sleep();							\
+	if (access_ok(VERIFY_READ, __gu_addr, (size)))			\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user_nosleep(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+
+/* more complex routines */
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+#ifndef __powerpc64__
+
+static inline unsigned long copy_from_user(void *to,
+		const void __user *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_tofrom_user((__force void __user *)to, from, n);
+	if ((unsigned long)from < TASK_SIZE) {
+		over = (unsigned long)from + n - TASK_SIZE;
+		return __copy_tofrom_user((__force void __user *)to, from,
+				n - over) + over;
+	}
+	return n;
+}
+
+static inline unsigned long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_tofrom_user(to, (__force void __user *)from, n);
+	if ((unsigned long)to < TASK_SIZE) {
+		over = (unsigned long)to + n - TASK_SIZE;
+		return __copy_tofrom_user(to, (__force void __user *)from,
+				n - over) + over;
+	}
+	return n;
+}
+
+#else /* __powerpc64__ */
+
+#define __copy_in_user(to, from, size) \
+	__copy_tofrom_user((to), (from), (size))
+
+extern unsigned long copy_from_user(void *to, const void __user *from,
+				    unsigned long n);
+extern unsigned long copy_to_user(void __user *to, const void *from,
+				  unsigned long n);
+extern unsigned long copy_in_user(void __user *to, const void __user *from,
+				  unsigned long n);
+
+#endif /* __powerpc64__ */
+
+static inline unsigned long __copy_from_user_inatomic(void *to,
+		const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 8)) {
+		unsigned long ret = 1;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret);
+			break;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret);
+			break;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret);
+			break;
+		case 8:
+			__get_user_size(*(u64 *)to, from, 8, ret);
+			break;
+		}
+		if (ret == 0)
+			return 0;
+	}
+	return __copy_tofrom_user((__force void __user *)to, from, n);
+}
+
+static inline unsigned long __copy_to_user_inatomic(void __user *to,
+		const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 8)) {
+		unsigned long ret = 1;
+
+		switch (n) {
+		case 1:
+			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret);
+			break;
+		case 2:
+			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret);
+			break;
+		case 4:
+			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret);
+			break;
+		case 8:
+			__put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret);
+			break;
+		}
+		if (ret == 0)
+			return 0;
+	}
+	return __copy_tofrom_user(to, (__force const void __user *)from, n);
+}
+
+static inline unsigned long __copy_from_user(void *to,
+		const void __user *from, unsigned long size)
+{
+	might_sleep();
+	return __copy_from_user_inatomic(to, from, size);
+}
+
+static inline unsigned long __copy_to_user(void __user *to,
+		const void *from, unsigned long size)
+{
+	might_sleep();
+	return __copy_to_user_inatomic(to, from, size);
+}
+
+extern unsigned long __clear_user(void __user *addr, unsigned long size);
+
+static inline unsigned long clear_user(void __user *addr, unsigned long size)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_WRITE, addr, size)))
+		return __clear_user(addr, size);
+	if ((unsigned long)addr < TASK_SIZE) {
+		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
+		return __clear_user(addr, size - over) + over;
+	}
+	return size;
+}
+
+extern int __strncpy_from_user(char *dst, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dst, const char __user *src,
+		long count)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_READ, src, 1)))
+		return __strncpy_from_user(dst, src, count);
+	return -EFAULT;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 for error
+ */
+extern int __strnlen_user(const char __user *str, long len, unsigned long top);
+
+/*
+ * Returns the length of the string at str (including the null byte),
+ * or 0 if we hit a page we can't access,
+ * or something > len if we didn't find a null byte.
+ *
+ * The `top' parameter to __strnlen_user is to make sure that
+ * we can never overflow from the user area into kernel space.
+ */
+static inline int strnlen_user(const char __user *str, long len)
+{
+	unsigned long top = current->thread.fs.seg;
+
+	if ((unsigned long)str > top)
+		return 0;
+	return __strnlen_user(str, len, top);
+}
+
+#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
+
+#endif  /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif	/* _ARCH_POWERPC_UACCESS_H */
diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h
new file mode 100644
index 00000000000..46b09ba6bea
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM	8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+	UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+	UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * speed   - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+	enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif				/* __UCC_H__ */
diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
new file mode 100644
index 00000000000..839aab8bf37
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -0,0 +1,244 @@
+/*
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_F	0x04000000	/* first */
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN			4
+#define UCC_FAST_MRBLR_ALIGNMENT		4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL				0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+	UCC_FAST_16_BIT_CRC = 0x00000000,
+	UCC_FAST_CRC_RESERVED0 = 0x00000040,
+	UCC_FAST_32_BIT_CRC = 0x00000080,
+	UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+	int ucc_num;
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	u32 regs;
+	int irq;
+	u32 uccm_mask;
+	int bd_mem_part;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int tci;
+	int txsy;
+	int rtsm;
+	int revd;
+	int rsyn;
+	u16 max_rx_buf_length;
+	u16 urfs;
+	u16 urfet;
+	u16 urfset;
+	u16 utfs;
+	u16 utfet;
+	u16 utftt;
+	u16 ufpt;
+	enum ucc_fast_channel_protocol_mode mode;
+	enum ucc_fast_transparent_txrx ttx_trx;
+	enum ucc_fast_tx_encoding_method tenc;
+	enum ucc_fast_rx_decoding_method renc;
+	enum ucc_fast_transparent_tcrc tcrc;
+	enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+	struct ucc_fast_info *uf_info;
+	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
+	u32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
+	u32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+	u16 __iomem *p_utodr;	/* pointer to the transmit on demand register */
+#endif
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+						    virtual fifo */
+	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+						    virtual fifo */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counter. */
+	u32 rx_frames;		/* Received frames counter (only frames
+				   passed to application). */
+	u32 tx_discarded;	/* Discarded tx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+	u32 rx_discarded;	/* Discarded rx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+#endif				/* STATISTICS */
+	u16 mrblr;		/* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info  - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif				/* __UCC_FAST_H__ */
diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
new file mode 100644
index 00000000000..0980e6ad335
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc_slow.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_PAD	0x40000000	/* add pads to short frames */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+#define T_A	0x04000000	/* Address - the data transmitted as address
+				   chars */
+#define T_TC	0x04000000	/* transmit CRC */
+#define T_CM	0x02000000	/* continuous mode */
+#define T_DEF	0x02000000	/* collision on previous attempt to transmit */
+#define T_P	0x01000000	/* Preamble - send Preamble sequence before
+				   data */
+#define T_HB	0x01000000	/* heartbeat */
+#define T_NS	0x00800000	/* No Stop */
+#define T_LC	0x00800000	/* late collision */
+#define T_RL	0x00400000	/* retransmission limit */
+#define T_UN	0x00020000	/* underrun */
+#define T_CT	0x00010000	/* CTS lost */
+#define T_CSL	0x00010000	/* carrier sense lost */
+#define T_RC	0x003c0000	/* retry count */
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_C	0x08000000	/* the last byte in this buffer is a cntl
+				   char */
+#define R_F	0x04000000	/* first */
+#define R_A	0x04000000	/* the first byte in this buffer is address
+				   byte */
+#define R_CM	0x02000000	/* continuous mode */
+#define R_ID	0x01000000	/* buffer close on reception of idles */
+#define R_M	0x01000000	/* Frame received because of promiscuous
+				   mode */
+#define R_AM	0x00800000	/* Address match */
+#define R_DE	0x00800000	/* Address match */
+#define R_LG	0x00200000	/* Break received */
+#define R_BR	0x00200000	/* Frame length violation */
+#define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
+#define R_FR	0x00100000	/* Framing Error (no stop bit) character
+				   received */
+#define R_PR	0x00080000	/* Parity Error character received */
+#define R_AB	0x00080000	/* Frame Aborted */
+#define R_SH	0x00080000	/* frame is too short */
+#define R_CR	0x00040000	/* CRC Error */
+#define R_OV	0x00020000	/* Overrun */
+#define R_CD	0x00010000	/* CD lost */
+#define R_CL	0x00010000	/* this frame is closed because of a
+				   collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN		4
+#define UCC_SLOW_MRBLR_ALIGNMENT	4
+#define UCC_SLOW_PRAM_SIZE		0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM	64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+	/* 32-bit CCITT CRC (Ethernet and HDLC) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+	int ucc_num;
+	int protocol;			/* QE_CR_PROTOCOL_xxx */
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	phys_addr_t regs;
+	int irq;
+	u16 uccm_mask;
+	int data_mem_part;
+	int init_tx;
+	int init_rx;
+	u32 tx_bd_ring_len;
+	u32 rx_bd_ring_len;
+	int rx_interrupts;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int rinv;
+	int tinv;
+	int rtsm;
+	int rfw;
+	int tci;
+	int tend;
+	int tfl;
+	int txsy;
+	u16 max_rx_buf_length;
+	enum ucc_slow_transparent_tcrc tcrc;
+	enum ucc_slow_channel_protocol_mode mode;
+	enum ucc_slow_diag_mode diag;
+	enum ucc_slow_tx_oversampling_rate tdcr;
+	enum ucc_slow_rx_oversampling_rate rdcr;
+	enum ucc_slow_tx_encoding_method tenc;
+	enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+	struct ucc_slow_info *us_info;
+	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
+	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
+	u32 us_pram_offset;
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	struct list_head confQ;	/* frames passed to chip waiting for tx */
+	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
+				   and length for first BD in a frame */
+	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
+	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
+	struct qe_bd *confBd;	/* next BD for confirm after Tx */
+	struct qe_bd *tx_bd;	/* next BD for new Tx request */
+	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
+	void *p_rx_frame;	/* accumulating receive frame */
+	u16 *p_ucce;		/* a pointer to the event register in memory.
+				 */
+	u16 *p_uccm;		/* a pointer to the mask register in memory */
+	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counters */
+	u32 rx_frames;		/* Received frames counters (only frames
+				   passed to application) */
+	u32 rx_discarded;	/* Discarded frames counters (frames that
+				   were discarded by the driver due to
+				   errors) */
+#endif				/* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info  - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_tx
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif				/* __UCC_SLOW_H__ */
diff --git a/arch/powerpc/include/asm/ucontext.h b/arch/powerpc/include/asm/ucontext.h
new file mode 100644
index 00000000000..d9a4ddf0cc8
--- /dev/null
+++ b/arch/powerpc/include/asm/ucontext.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_POWERPC_UCONTEXT_H
+#define _ASM_POWERPC_UCONTEXT_H
+
+#ifdef __powerpc64__
+#include <asm/sigcontext.h>
+#else
+#include <asm/elf.h>
+#endif
+#include <asm/signal.h>
+
+#ifndef __powerpc64__
+struct mcontext {
+	elf_gregset_t	mc_gregs;
+	elf_fpregset_t	mc_fregs;
+	unsigned long	mc_pad[2];
+	elf_vrregset_t	mc_vregs __attribute__((__aligned__(16)));
+};
+#endif
+
+struct ucontext {
+	unsigned long	uc_flags;
+	struct ucontext __user *uc_link;
+	stack_t		uc_stack;
+#ifndef __powerpc64__
+	int		uc_pad[7];
+	struct mcontext	__user *uc_regs;/* points to uc_mcontext field */
+#endif
+	sigset_t	uc_sigmask;
+	/* glibc has 1024-bit signal masks, ours are 64-bit */
+#ifdef __powerpc64__
+	sigset_t	__unused[15];	/* Allow for uc_sigmask growth */
+	struct sigcontext uc_mcontext;	/* last for extensibility */
+#else
+	int		uc_maskext[30];
+	int		uc_pad2[3];
+	struct mcontext	uc_mcontext;
+#endif
+};
+
+#endif /* _ASM_POWERPC_UCONTEXT_H */
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
new file mode 100644
index 00000000000..6418ceea44b
--- /dev/null
+++ b/arch/powerpc/include/asm/udbg.h
@@ -0,0 +1,55 @@
+/*
+ * (c) 2001, 2006 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_UDBG_H
+#define _ASM_POWERPC_UDBG_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/init.h>
+
+extern void (*udbg_putc)(char c);
+extern int (*udbg_getc)(void);
+extern int (*udbg_getc_poll)(void);
+
+extern void udbg_puts(const char *s);
+extern int udbg_write(const char *s, int n);
+extern int udbg_read(char *buf, int buflen);
+
+extern void register_early_udbg_console(void);
+extern void udbg_printf(const char *fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+extern void udbg_progress(char *s, unsigned short hex);
+
+extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
+			   unsigned int clock);
+extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
+					  unsigned int clock);
+
+struct device_node;
+extern void udbg_scc_init(int force_scc);
+extern int udbg_adb_init(int force_btext);
+extern void udbg_adb_init_early(void);
+
+extern void __init udbg_early_init(void);
+extern void __init udbg_init_debug_lpar(void);
+extern void __init udbg_init_pmac_realmode(void);
+extern void __init udbg_init_maple_realmode(void);
+extern void __init udbg_init_pas_realmode(void);
+extern void __init udbg_init_iseries(void);
+extern void __init udbg_init_rtas_panel(void);
+extern void __init udbg_init_rtas_console(void);
+extern void __init udbg_init_debug_beat(void);
+extern void __init udbg_init_btext(void);
+extern void __init udbg_init_44x_as1(void);
+extern void __init udbg_init_40x_realmode(void);
+extern void __init udbg_init_cpm(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/arch/powerpc/include/asm/uic.h b/arch/powerpc/include/asm/uic.h
new file mode 100644
index 00000000000..597edfcae3d
--- /dev/null
+++ b/arch/powerpc/include/asm/uic.h
@@ -0,0 +1,21 @@
+/*
+ * IBM PPC4xx UIC external definitions and structure.
+ *
+ * Maintainer: David Gibson <dwg@au1.ibm.com>
+ * Copyright 2007 IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_UIC_H
+#define _ASM_POWERPC_UIC_H
+
+#ifdef __KERNEL__
+
+extern void __init uic_init_tree(void);
+extern unsigned int uic_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UIC_H */
diff --git a/arch/powerpc/include/asm/unaligned.h b/arch/powerpc/include/asm/unaligned.h
new file mode 100644
index 00000000000..5f1b1e3c213
--- /dev/null
+++ b/arch/powerpc/include/asm/unaligned.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_POWERPC_UNALIGNED_H
+#define _ASM_POWERPC_UNALIGNED_H
+
+#ifdef __KERNEL__
+
+/*
+ * The PowerPC can do unaligned accesses itself in big endian mode.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_UNALIGNED_H */
diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h
new file mode 100644
index 00000000000..f737732c386
--- /dev/null
+++ b/arch/powerpc/include/asm/uninorth.h
@@ -0,0 +1,229 @@
+/*
+ * uninorth.h: definitions for using the "UniNorth" host bridge chip
+ *             from Apple. This chip is used on "Core99" machines
+ *	       This also includes U2 used on more recent MacRISC2/3
+ *             machines and U3 (G5) 
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_UNINORTH_H__
+#define __ASM_UNINORTH_H__
+
+/*
+ * Uni-N and U3 config space reg. definitions
+ *
+ * (Little endian)
+ */
+
+/* Address ranges selection. This one should work with Bandit too */
+/* Not U3 */
+#define UNI_N_ADDR_SELECT		0x48
+#define UNI_N_ADDR_COARSE_MASK		0xffff0000	/* 256Mb regions at *0000000 */
+#define UNI_N_ADDR_FINE_MASK		0x0000ffff	/*  16Mb regions at f*000000 */
+
+/* AGP registers */
+/* Not U3 */
+#define UNI_N_CFG_GART_BASE		0x8c
+#define UNI_N_CFG_AGP_BASE		0x90
+#define UNI_N_CFG_GART_CTRL		0x94
+#define UNI_N_CFG_INTERNAL_STATUS	0x98
+#define UNI_N_CFG_GART_DUMMY_PAGE	0xa4
+
+/* UNI_N_CFG_GART_CTRL bits definitions */
+#define UNI_N_CFG_GART_INVAL		0x00000001
+#define UNI_N_CFG_GART_ENABLE		0x00000100
+#define UNI_N_CFG_GART_2xRESET		0x00010000
+#define UNI_N_CFG_GART_DISSBADET	0x00020000
+/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
+#define U3_N_CFG_GART_SYNCMODE		0x00040000
+#define U3_N_CFG_GART_PERFRD		0x00080000
+#define U3_N_CFG_GART_B2BGNT		0x00200000
+#define U3_N_CFG_GART_FASTDDR		0x00400000
+
+/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
+ * revision 1.5 (x4 AGP) may need further changes.
+ *
+ * AGP_BASE register contains the base address of the AGP aperture on
+ * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
+ * even if decoding of this address range is enabled in the address select
+ * register. Apparently, the only supported bases are 256Mb multiples
+ * (high 4 bits of that register).
+ *
+ * GART_BASE register appear to contain the physical address of the GART
+ * in system memory in the high address bits (page aligned), and the
+ * GART size in the low order bits (number of GART pages)
+ *
+ * The GART format itself is one 32bits word per physical memory page.
+ * This word contains, in little-endian format (!!!), the physical address
+ * of the page in the high bits, and what appears to be an "enable" bit
+ * in the LSB bit (0) that must be set to 1 when the entry is valid.
+ *
+ * Obviously, the GART is not cache coherent and so any change to it
+ * must be flushed to memory (or maybe just make the GART space non
+ * cachable). AGP memory itself doens't seem to be cache coherent neither.
+ *
+ * In order to invalidate the GART (which is probably necessary to inval
+ * the bridge internal TLBs), the following sequence has to be written,
+ * in order, to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   UNI_N_CFG_GART_ENABLE
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
+ *   UNI_N_CFG_GART_ENABLE
+ *
+ * As far as AGP "features" are concerned, it looks like fast write may
+ * not be supported but this has to be confirmed.
+ *
+ * Turning on AGP seem to require a double invalidate operation, one before
+ * setting the AGP command register, on after.
+ *
+ * Turning off AGP seems to require the following sequence: first wait
+ * for the AGP to be idle by reading the internal status register, then
+ * write in that order to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   0
+ *   UNI_N_CFG_GART_2xRESET
+ *   0
+ */
+
+/*
+ * Uni-N memory mapped reg. definitions
+ *
+ * Those registers are Big-Endian !!
+ *
+ * Their meaning come from either Darwin and/or from experiments I made with
+ * the bootrom, I'm not sure about their exact meaning yet
+ *
+ */
+
+/* Version of the UniNorth chip */
+#define UNI_N_VERSION			0x0000		/* Known versions: 3,7 and 8 */
+
+#define UNI_N_VERSION_107		0x0003		/* 1.0.7 */
+#define UNI_N_VERSION_10A		0x0007		/* 1.0.10 */
+#define UNI_N_VERSION_150		0x0011		/* 1.5 */
+#define UNI_N_VERSION_200		0x0024		/* 2.0 */
+#define UNI_N_VERSION_PANGEA		0x00C0		/* Integrated U1 + K */
+#define UNI_N_VERSION_INTREPID		0x00D2		/* Integrated U2 + K */
+#define UNI_N_VERSION_300		0x0030		/* 3.0 (U3 on G5) */
+
+/* This register is used to enable/disable various clocks */
+#define UNI_N_CLOCK_CNTL		0x0020
+#define UNI_N_CLOCK_CNTL_PCI		0x00000001	/* PCI2 clock control */
+#define UNI_N_CLOCK_CNTL_GMAC		0x00000002	/* GMAC clock control */
+#define UNI_N_CLOCK_CNTL_FW		0x00000004	/* FireWire clock control */
+#define UNI_N_CLOCK_CNTL_ATA100		0x00000010	/* ATA-100 clock control (U2) */
+
+/* Power Management control */
+#define UNI_N_POWER_MGT			0x0030
+#define UNI_N_POWER_MGT_NORMAL		0x00
+#define UNI_N_POWER_MGT_IDLE2		0x01
+#define UNI_N_POWER_MGT_SLEEP		0x02
+
+/* This register is configured by Darwin depending on the UniN
+ * revision
+ */
+#define UNI_N_ARB_CTRL			0x0040
+#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT	15
+#define UNI_N_ARB_CTRL_QACK_DELAY_MASK	0x0e1f8000
+#define UNI_N_ARB_CTRL_QACK_DELAY	0x30
+#define UNI_N_ARB_CTRL_QACK_DELAY105	0x00
+
+/* This one _might_ return the CPU number of the CPU reading it;
+ * the bootROM decides whether to boot or to sleep/spinloop depending
+ * on this register beeing 0 or not
+ */
+#define UNI_N_CPU_NUMBER		0x0050
+
+/* This register appear to be read by the bootROM to decide what
+ *  to do on a non-recoverable reset (powerup or wakeup)
+ */
+#define UNI_N_HWINIT_STATE		0x0070
+#define UNI_N_HWINIT_STATE_SLEEPING	0x01
+#define UNI_N_HWINIT_STATE_RUNNING	0x02
+/* This last bit appear to be used by the bootROM to know the second
+ * CPU has started and will enter it's sleep loop with IP=0
+ */
+#define UNI_N_HWINIT_STATE_CPU1_FLAG	0x10000000
+
+/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
+ * is in low speed mode.
+ */
+#define UNI_N_AACK_DELAY		0x0100
+#define UNI_N_AACK_DELAY_ENABLE		0x00000001
+
+/* Clock status for Intrepid */
+#define UNI_N_CLOCK_STOP_STATUS0	0x0150
+#define UNI_N_CLOCK_STOPPED_EXTAGP	0x00200000
+#define UNI_N_CLOCK_STOPPED_AGPDEL	0x00100000
+#define UNI_N_CLOCK_STOPPED_I2S0_45_49	0x00080000
+#define UNI_N_CLOCK_STOPPED_I2S0_18	0x00040000
+#define UNI_N_CLOCK_STOPPED_I2S1_45_49	0x00020000
+#define UNI_N_CLOCK_STOPPED_I2S1_18	0x00010000
+#define UNI_N_CLOCK_STOPPED_TIMER	0x00008000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18	0x00004000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32	0x00002000
+#define UNI_N_CLOCK_STOPPED_SCC_VIA32	0x00001000
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT0	0x00000800
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT1	0x00000400
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT2	0x00000200
+#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO	0x00000100
+#define UNI_N_CLOCK_STOPPED_VEO0	0x00000080
+#define UNI_N_CLOCK_STOPPED_VEO1	0x00000040
+#define UNI_N_CLOCK_STOPPED_USB0	0x00000020
+#define UNI_N_CLOCK_STOPPED_USB1	0x00000010
+#define UNI_N_CLOCK_STOPPED_USB2	0x00000008
+#define UNI_N_CLOCK_STOPPED_32		0x00000004
+#define UNI_N_CLOCK_STOPPED_45		0x00000002
+#define UNI_N_CLOCK_STOPPED_49		0x00000001
+
+#define UNI_N_CLOCK_STOP_STATUS1	0x0160
+#define UNI_N_CLOCK_STOPPED_PLL4REF	0x00080000
+#define UNI_N_CLOCK_STOPPED_CPUDEL	0x00040000
+#define UNI_N_CLOCK_STOPPED_CPU		0x00020000
+#define UNI_N_CLOCK_STOPPED_BUF_REFCKO	0x00010000
+#define UNI_N_CLOCK_STOPPED_PCI2	0x00008000
+#define UNI_N_CLOCK_STOPPED_FW		0x00004000
+#define UNI_N_CLOCK_STOPPED_GB		0x00002000
+#define UNI_N_CLOCK_STOPPED_ATA66	0x00001000
+#define UNI_N_CLOCK_STOPPED_ATA100	0x00000800
+#define UNI_N_CLOCK_STOPPED_MAX		0x00000400
+#define UNI_N_CLOCK_STOPPED_PCI1	0x00000200
+#define UNI_N_CLOCK_STOPPED_KLPCI	0x00000100
+#define UNI_N_CLOCK_STOPPED_USB0PCI	0x00000080
+#define UNI_N_CLOCK_STOPPED_USB1PCI	0x00000040
+#define UNI_N_CLOCK_STOPPED_USB2PCI	0x00000020
+#define UNI_N_CLOCK_STOPPED_7PCI1	0x00000008
+#define UNI_N_CLOCK_STOPPED_AGP		0x00000004
+#define UNI_N_CLOCK_STOPPED_PCI0	0x00000002
+#define UNI_N_CLOCK_STOPPED_18		0x00000001
+
+/* Intrepid registe to OF do-platform-clockspreading */
+#define UNI_N_CLOCK_SPREADING		0x190
+
+/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
+
+
+/*
+ * U3 specific registers
+ */
+
+
+/* U3 Toggle */
+#define U3_TOGGLE_REG			0x00e0
+#define U3_PMC_START_STOP		0x0001
+#define U3_MPIC_RESET			0x0002
+#define U3_MPIC_OUTPUT_ENABLE		0x0004
+
+/* U3 API PHY Config 1 */
+#define U3_API_PHY_CONFIG_1		0x23030
+
+/* U3 HyperTransport registers */
+#define U3_HT_CONFIG_BASE      		0x70000
+#define U3_HT_LINK_COMMAND		0x100
+#define U3_HT_LINK_CONFIG		0x110
+#define U3_HT_LINK_FREQ			0x120
+
+#endif /* __ASM_UNINORTH_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
new file mode 100644
index 00000000000..e07d0c76ed7
--- /dev/null
+++ b/arch/powerpc/include/asm/unistd.h
@@ -0,0 +1,398 @@
+#ifndef _ASM_POWERPC_UNISTD_H_
+#define _ASM_POWERPC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	166
+#define __NR_poll		167
+#define __NR_nfsservctl		168
+#define __NR_setresgid		169
+#define __NR_getresgid		170
+#define __NR_prctl		171
+#define __NR_rt_sigreturn	172
+#define __NR_rt_sigaction	173
+#define __NR_rt_sigprocmask	174
+#define __NR_rt_sigpending	175
+#define __NR_rt_sigtimedwait	176
+#define __NR_rt_sigqueueinfo	177
+#define __NR_rt_sigsuspend	178
+#define __NR_pread64		179
+#define __NR_pwrite64		180
+#define __NR_chown		181
+#define __NR_getcwd		182
+#define __NR_capget		183
+#define __NR_capset		184
+#define __NR_sigaltstack	185
+#define __NR_sendfile		186
+#define __NR_getpmsg		187	/* some people actually want streams */
+#define __NR_putpmsg		188	/* some people actually want streams */
+#define __NR_vfork		189
+#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
+#define __NR_readahead		191
+#ifndef __powerpc64__			/* these are 32-bit only */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#endif
+#define __NR_pciconfig_read	198
+#define __NR_pciconfig_write	199
+#define __NR_pciconfig_iobase	200
+#define __NR_multiplexer	201
+#define __NR_getdents64		202
+#define __NR_pivot_root		203
+#ifndef __powerpc64__
+#define __NR_fcntl64		204
+#endif
+#define __NR_madvise		205
+#define __NR_mincore		206
+#define __NR_gettid		207
+#define __NR_tkill		208
+#define __NR_setxattr		209
+#define __NR_lsetxattr		210
+#define __NR_fsetxattr		211
+#define __NR_getxattr		212
+#define __NR_lgetxattr		213
+#define __NR_fgetxattr		214
+#define __NR_listxattr		215
+#define __NR_llistxattr		216
+#define __NR_flistxattr		217
+#define __NR_removexattr	218
+#define __NR_lremovexattr	219
+#define __NR_fremovexattr	220
+#define __NR_futex		221
+#define __NR_sched_setaffinity	222
+#define __NR_sched_getaffinity	223
+/* 224 currently unused */
+#define __NR_tuxcall		225
+#ifndef __powerpc64__
+#define __NR_sendfile64		226
+#endif
+#define __NR_io_setup		227
+#define __NR_io_destroy		228
+#define __NR_io_getevents	229
+#define __NR_io_submit		230
+#define __NR_io_cancel		231
+#define __NR_set_tid_address	232
+#define __NR_fadvise64		233
+#define __NR_exit_group		234
+#define __NR_lookup_dcookie	235
+#define __NR_epoll_create	236
+#define __NR_epoll_ctl		237
+#define __NR_epoll_wait		238
+#define __NR_remap_file_pages	239
+#define __NR_timer_create	240
+#define __NR_timer_settime	241
+#define __NR_timer_gettime	242
+#define __NR_timer_getoverrun	243
+#define __NR_timer_delete	244
+#define __NR_clock_settime	245
+#define __NR_clock_gettime	246
+#define __NR_clock_getres	247
+#define __NR_clock_nanosleep	248
+#define __NR_swapcontext	249
+#define __NR_tgkill		250
+#define __NR_utimes		251
+#define __NR_statfs64		252
+#define __NR_fstatfs64		253
+#ifndef __powerpc64__
+#define __NR_fadvise64_64	254
+#endif
+#define __NR_rtas		255
+#define __NR_sys_debug_setcontext 256
+/* Number 257 is reserved for vserver */
+#define __NR_migrate_pages	258
+#define __NR_mbind		259
+#define __NR_get_mempolicy	260
+#define __NR_set_mempolicy	261
+#define __NR_mq_open		262
+#define __NR_mq_unlink		263
+#define __NR_mq_timedsend	264
+#define __NR_mq_timedreceive	265
+#define __NR_mq_notify		266
+#define __NR_mq_getsetattr	267
+#define __NR_kexec_load		268
+#define __NR_add_key		269
+#define __NR_request_key	270
+#define __NR_keyctl		271
+#define __NR_waitid		272
+#define __NR_ioprio_set		273
+#define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
+#define __NR_spu_run		278
+#define __NR_spu_create		279
+#define __NR_pselect6		280
+#define __NR_ppoll		281
+#define __NR_unshare		282
+#define __NR_splice		283
+#define __NR_tee		284
+#define __NR_vmsplice		285
+#define __NR_openat		286
+#define __NR_mkdirat		287
+#define __NR_mknodat		288
+#define __NR_fchownat		289
+#define __NR_futimesat		290
+#ifdef __powerpc64__
+#define __NR_newfstatat		291
+#else
+#define __NR_fstatat64		291
+#endif
+#define __NR_unlinkat		292
+#define __NR_renameat		293
+#define __NR_linkat		294
+#define __NR_symlinkat		295
+#define __NR_readlinkat		296
+#define __NR_fchmodat		297
+#define __NR_faccessat		298
+#define __NR_get_robust_list	299
+#define __NR_set_robust_list	300
+#define __NR_move_pages		301
+#define __NR_getcpu		302
+#define __NR_epoll_pwait	303
+#define __NR_utimensat		304
+#define __NR_signalfd		305
+#define __NR_timerfd_create	306
+#define __NR_eventfd		307
+#define __NR_sync_file_range2	308
+#define __NR_fallocate		309
+#define __NR_subpage_prot	310
+#define __NR_timerfd_settime	311
+#define __NR_timerfd_gettime	312
+#define __NR_signalfd4		313
+#define __NR_eventfd2		314
+#define __NR_epoll_create1	315
+#define __NR_dup3		316
+#define __NR_pipe2		317
+#define __NR_inotify_init1	318
+
+#ifdef __KERNEL__
+
+#define __NR_syscalls		319
+
+#define __NR__exit __NR_exit
+#define NR_syscalls	__NR_syscalls
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#ifdef CONFIG_PPC32
+#define __ARCH_WANT_OLD_STAT
+#endif
+#ifdef CONFIG_PPC64
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_NEWFSTATAT
+#endif
+
+/*
+ * "Conditional" syscalls
+ */
+#define cond_syscall(x) \
+	asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif		/* __ASSEMBLY__ */
+#endif		/* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/include/asm/user.h b/arch/powerpc/include/asm/user.h
new file mode 100644
index 00000000000..3fd4545dd74
--- /dev/null
+++ b/arch/powerpc/include/asm/user.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_POWERPC_USER_H
+#define _ASM_POWERPC_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Adapted from <asm-alpha/user.h>
+ *
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+#endif	/* _ASM_POWERPC_USER_H */
diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
new file mode 100644
index 00000000000..26fc449bd98
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso.h
@@ -0,0 +1,78 @@
+#ifndef __PPC64_VDSO_H__
+#define __PPC64_VDSO_H__
+
+#ifdef __KERNEL__
+
+/* Default link addresses for the vDSOs */
+#define VDSO32_LBASE	0x100000
+#define VDSO64_LBASE	0x100000
+
+/* Default map addresses */
+#define VDSO32_MBASE	VDSO32_LBASE
+#define VDSO64_MBASE	VDSO64_LBASE
+
+#define VDSO_VERSION_STRING	LINUX_2.6.15
+
+/* Define if 64 bits VDSO has procedure descriptors */
+#undef VDS64_HAS_DESCRIPTORS
+
+#ifndef __ASSEMBLY__
+
+/* Offsets relative to thread->vdso_base */
+extern unsigned long vdso64_rt_sigtramp;
+extern unsigned long vdso32_sigtramp;
+extern unsigned long vdso32_rt_sigtramp;
+
+#else /* __ASSEMBLY__ */
+
+#ifdef __VDSO64__
+#ifdef VDS64_HAS_DESCRIPTORS
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+        .section ".opd","a";		\
+        .align 3;			\
+	name:				\
+	.quad .name,.TOC.@tocbase,0;	\
+	.previous;			\
+	.globl .name;			\
+	.type .name,@function; 		\
+	.name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size .name,.-.name;
+
+#define V_LOCAL_FUNC(name) (.name)
+
+#else /* VDS64_HAS_DESCRIPTORS */
+
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+	name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size name,.-name;
+
+#define V_LOCAL_FUNC(name) (name)
+
+#endif /* VDS64_HAS_DESCRIPTORS */
+#endif /* __VDSO64__ */
+
+#ifdef __VDSO32__
+
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+	.type name,@function; 		\
+	name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size name,.-name;
+
+#define V_LOCAL_FUNC(name) (name)
+
+#endif /* __VDSO32__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __PPC64_VDSO_H__ */
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
new file mode 100644
index 00000000000..f01393224b5
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -0,0 +1,121 @@
+#ifndef _VDSO_DATAPAGE_H
+#define _VDSO_DATAPAGE_H
+#ifdef __KERNEL__
+
+/*
+ * Copyright (C) 2002 Peter Bergner <bergner@vnet.ibm.com>, IBM
+ * Copyright (C) 2005 Benjamin Herrenschmidy <benh@kernel.crashing.org>,
+ * 		      IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+/*
+ * Note about this structure:
+ *
+ * This structure was historically called systemcfg and exposed to
+ * userland via /proc/ppc64/systemcfg. Unfortunately, this became an
+ * ABI issue as some proprietary software started relying on being able
+ * to mmap() it, thus we have to keep the base layout at least for a
+ * few kernel versions.
+ *
+ * However, since ppc32 doesn't suffer from this backward handicap,
+ * a simpler version of the data structure is used there with only the
+ * fields actually used by the vDSO.
+ *
+ */
+
+/*
+ * If the major version changes we are incompatible.
+ * Minor version changes are a hint.
+ */
+#define SYSTEMCFG_MAJOR 1
+#define SYSTEMCFG_MINOR 1
+
+#ifndef __ASSEMBLY__
+
+#include <linux/unistd.h>
+
+#define SYSCALL_MAP_SIZE      ((__NR_syscalls + 31) / 32)
+
+/*
+ * So here is the ppc64 backward compatible version
+ */
+
+#ifdef CONFIG_PPC64
+
+struct vdso_data {
+	__u8  eye_catcher[16];		/* Eyecatcher: SYSTEMCFG:PPC64	0x00 */
+	struct {			/* Systemcfg version numbers	     */
+		__u32 major;		/* Major number			0x10 */
+		__u32 minor;		/* Minor number			0x14 */
+	} version;
+
+	/* Note about the platform flags: it now only contains the lpar
+	 * bit. The actual platform number is dead and burried
+	 */
+	__u32 platform;			/* Platform flags		0x18 */
+	__u32 processor;		/* Processor type		0x1C */
+	__u64 processorCount;		/* # of physical processors	0x20 */
+	__u64 physicalMemorySize;	/* Size of real memory(B)	0x28 */
+	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
+	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
+	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
+	__u64 stamp_xsec;		/*				0x48 */
+	__u64 tb_update_count;		/* Timebase atomicity ctr	0x50 */
+	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
+	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
+	__u32 dcache_size;		/* L1 d-cache size		0x60 */
+	__u32 dcache_line_size;		/* L1 d-cache line size		0x64 */
+	__u32 icache_size;		/* L1 i-cache size		0x68 */
+	__u32 icache_line_size;		/* L1 i-cache line size		0x6C */
+
+	/* those additional ones don't have to be located anywhere
+	 * special as they were not part of the original systemcfg
+	 */
+	__u32 dcache_block_size;		/* L1 d-cache block size     */
+	__u32 icache_block_size;		/* L1 i-cache block size     */
+	__u32 dcache_log_block_size;		/* L1 d-cache log block size */
+	__u32 icache_log_block_size;		/* L1 i-cache log block size */
+	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
+	__s32 wtom_clock_nsec;
+   	__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls  */
+   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+};
+
+#else /* CONFIG_PPC64 */
+
+/*
+ * And here is the simpler 32 bits version
+ */
+struct vdso_data {
+	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
+	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
+	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
+	__u64 stamp_xsec;		/*				0x48 */
+	__u32 tb_update_count;		/* Timebase atomicity ctr	0x50 */
+	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
+	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
+	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
+	__s32 wtom_clock_nsec;
+   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+	__u32 dcache_block_size;	/* L1 d-cache block size     */
+	__u32 icache_block_size;	/* L1 i-cache block size     */
+	__u32 dcache_log_block_size;	/* L1 d-cache log block size */
+	__u32 icache_log_block_size;	/* L1 i-cache log block size */
+};
+
+#endif /* CONFIG_PPC64 */
+
+#ifdef __KERNEL__
+extern struct vdso_data *vdso_data;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _SYSTEMCFG_H */
diff --git a/arch/powerpc/include/asm/vga.h b/arch/powerpc/include/asm/vga.h
new file mode 100644
index 00000000000..a2eac409c1e
--- /dev/null
+++ b/arch/powerpc/include/asm/vga.h
@@ -0,0 +1,53 @@
+#ifndef _ASM_POWERPC_VGA_H_
+#define _ASM_POWERPC_VGA_H_
+
+#ifdef __KERNEL__
+
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+
+#include <asm/io.h>
+
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+
+#define VT_BUF_HAVE_RW
+/*
+ *  These are only needed for supporting VGA or MDA text mode, which use little
+ *  endian byte ordering.
+ *  In other cases, we can optimize by using native byte ordering and
+ *  <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+    st_le16(addr, val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+    return ld_le16(addr);
+}
+
+#define VT_BUF_HAVE_MEMCPYW
+#define scr_memcpyw	memcpy
+
+#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
+
+extern unsigned long vgacon_remap_base;
+
+#ifdef __powerpc64__
+#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s))
+#else
+#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base)
+#endif
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_VGA_H_ */
diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h
new file mode 100644
index 00000000000..0a290a19594
--- /dev/null
+++ b/arch/powerpc/include/asm/vio.h
@@ -0,0 +1,118 @@
+/*
+ * IBM PowerPC Virtual I/O Infrastructure Support.
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *  Dave Engebretsen engebret@us.ibm.com
+ *  Santiago Leon santil@us.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_VIO_H
+#define _ASM_POWERPC_VIO_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/hvcall.h>
+#include <asm/scatterlist.h>
+
+/*
+ * Architecture-specific constants for drivers to
+ * extract attributes of the device using vio_get_attribute()
+ */
+#define VETH_MAC_ADDR "local-mac-address"
+#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
+
+/* End architecture-specific constants */
+
+#define h_vio_signal(ua, mode) \
+  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
+
+#define VIO_IRQ_DISABLE		0UL
+#define VIO_IRQ_ENABLE		1UL
+
+/*
+ * VIO CMO minimum entitlement for all devices and spare entitlement
+ */
+#define VIO_CMO_MIN_ENT 1562624
+
+struct iommu_table;
+
+/**
+ * vio_dev - This structure is used to describe virtual I/O devices.
+ *
+ * @desired: set from return of driver's get_desired_dma() function
+ * @entitled: bytes of IO data that has been reserved for this device.
+ * @allocated: bytes of IO data currently in use by the device.
+ * @allocs_failed: number of DMA failures due to insufficient entitlement.
+ */
+struct vio_dev {
+	const char *name;
+	const char *type;
+	uint32_t unit_address;
+	unsigned int irq;
+	struct {
+		size_t desired;
+		size_t entitled;
+		size_t allocated;
+		atomic_t allocs_failed;
+	} cmo;
+	struct device dev;
+};
+
+struct vio_driver {
+	const struct vio_device_id *id_table;
+	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
+	int (*remove)(struct vio_dev *dev);
+	/* A driver must have a get_desired_dma() function to
+	 * be loaded in a CMO environment if it uses DMA.
+	 */
+	unsigned long (*get_desired_dma)(struct vio_dev *dev);
+	struct device_driver driver;
+};
+
+extern int vio_register_driver(struct vio_driver *drv);
+extern void vio_unregister_driver(struct vio_driver *drv);
+
+extern int vio_cmo_entitlement_update(size_t);
+extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired);
+
+extern void __devinit vio_unregister_device(struct vio_dev *dev);
+
+struct device_node;
+
+extern struct vio_dev *vio_register_device_node(
+		struct device_node *node_vdev);
+extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
+		int *length);
+#ifdef CONFIG_PPC_PSERIES
+extern struct vio_dev *vio_find_node(struct device_node *vnode);
+extern int vio_enable_interrupts(struct vio_dev *dev);
+extern int vio_disable_interrupts(struct vio_dev *dev);
+#else
+static inline int vio_enable_interrupts(struct vio_dev *dev)
+{
+	return 0;
+}
+#endif
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vio_driver, driver);
+}
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+	return container_of(dev, struct vio_dev, dev);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_VIO_H */
diff --git a/arch/powerpc/include/asm/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h
new file mode 100644
index 00000000000..343612f8fec
--- /dev/null
+++ b/arch/powerpc/include/asm/xilinx_intc.h
@@ -0,0 +1,20 @@
+/*
+ * Xilinx intc external definitions
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_XILINX_INTC_H
+#define _ASM_POWERPC_XILINX_INTC_H
+
+#ifdef __KERNEL__
+
+extern void __init xilinx_intc_init_tree(void);
+extern unsigned int xilinx_intc_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_XILINX_INTC_H */
diff --git a/arch/powerpc/include/asm/xmon.h b/arch/powerpc/include/asm/xmon.h
new file mode 100644
index 00000000000..5eb8e599e5c
--- /dev/null
+++ b/arch/powerpc/include/asm/xmon.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_POWERPC_XMON_H
+#define __ASM_POWERPC_XMON_H
+
+/*
+ * Copyrignt (C) 2006 IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/irqreturn.h>
+
+#ifdef CONFIG_XMON
+extern void xmon_setup(void);
+extern void xmon_register_spus(struct list_head *list);
+struct pt_regs;
+extern int xmon(struct pt_regs *excp);
+extern irqreturn_t xmon_irq(int, void *);
+#else
+static inline void xmon_setup(void) { };
+static inline void xmon_register_spus(struct list_head *list) { };
+#endif
+
+#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
+extern int cpus_are_in_xmon(void);
+#endif
+
+#endif /* __KERNEL __ */
+#endif /* __ASM_POWERPC_XMON_H */
diff --git a/arch/powerpc/include/asm/xor.h b/arch/powerpc/include/asm/xor.h
new file mode 100644
index 00000000000..c82eb12a5b1
--- /dev/null
+++ b/arch/powerpc/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index bf0b1fd0ec3..946daea780f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -14,12 +14,13 @@ endif
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg
-CFLAGS_REMOVE_prom_init.o = -pg
+CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
 
 ifdef CONFIG_DYNAMIC_FTRACE
 # dynamic ftrace setup.
-CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
 endif
 
 endif
@@ -59,8 +60,6 @@ obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
 obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
-
 extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
 extra-$(CONFIG_PPC64)		:= head_64.o
 extra-$(CONFIG_40x)		:= head_40x.o
@@ -74,6 +73,7 @@ obj-y				+= time.o prom.o traps.o setup-common.o \
 				   misc_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
 obj-$(CONFIG_PPC64)		+= dma_64.o iommu.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
@@ -99,12 +99,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
 obj-y				+= iomap.o
 endif
 
-else
-# stuff used from here for ARCH=ppc
-smpobj-$(CONFIG_SMP)		+= smp.o
-
-endif
-
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
@@ -120,9 +114,6 @@ PHONY += systbl_chk
 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
 	$(call cmd,systbl_chk)
 
-
-ifeq ($(CONFIG_PPC_MERGE),y)
-
 $(obj)/built-in.o:		prom_init_check
 
 quiet_cmd_prom_init_check = CALL    $<
@@ -132,7 +123,4 @@ PHONY += prom_init_check
 prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
 	$(call cmd,prom_init_check)
 
-endif
-
-
 clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 367129789cc..5af4e9b2dbe 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -647,7 +647,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 		       unsigned int flags, unsigned int length)
 {
 	char *ptr = (char *) &current->thread.TS_FPR(reg);
-	int ret;
+	int ret = 0;
 
 	flush_vsx_to_thread(current);
 
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 5465e8de0e6..80cac984d85 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -39,12 +39,6 @@ _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
 	b	__fixup_440A_mcheck
 
- /* Temporary fixup for arch/ppc until we kill the whole thing */
-#ifndef CONFIG_PPC_MERGE
-_GLOBAL(__fixup_440A_mcheck)
-	blr
-#endif
-
 /* enable APU between CPU and FPU */
 _GLOBAL(__init_fpu_44x)
 	mfspr	r3,SPRN_CCR0
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f7f3c215d06..25c273c761d 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -23,6 +23,9 @@
 struct cpu_spec* cur_cpu_spec = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
 
+/* The platform string corresponding to the real PVR */
+const char *powerpc_base_platform;
+
 /* NOTE:
  * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
  * the responsibility of the appropriate CPU save/restore functions to
@@ -355,6 +358,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power5+",
 		.platform		= "power5+",
 	},
 	{	/* Power6 */
@@ -386,6 +390,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power6",
 		.platform		= "power6",
 	},
 	{	/* 2.06-compliant processor, i.e. Power7 "architected" mode */
@@ -397,6 +402,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power7",
 		.platform		= "power7",
 	},
 	{	/* Power7 */
@@ -1629,9 +1635,34 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 				t->cpu_setup = s->cpu_setup;
 				t->cpu_restore = s->cpu_restore;
 				t->platform = s->platform;
+				/*
+				 * If we have passed through this logic once
+				 * before and have pulled the default case
+				 * because the real PVR was not found inside
+				 * cpu_specs[], then we are possibly running in
+				 * compatibility mode. In that case, let the
+				 * oprofiler know which set of compatibility
+				 * counters to pull from by making sure the
+				 * oprofile_cpu_type string is set to that of
+				 * compatibility mode. If the oprofile_cpu_type
+				 * already has a value, then we are possibly
+				 * overriding a real PVR with a logical one, and,
+				 * in that case, keep the current value for
+				 * oprofile_cpu_type.
+				 */
+				if (t->oprofile_cpu_type == NULL)
+					t->oprofile_cpu_type = s->oprofile_cpu_type;
 			} else
 				*t = *s;
 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
+
+			/*
+			 * Set the base platform string once; assumes
+			 * we're called with real pvr first.
+			 */
+			if (*PTRRELOC(&powerpc_base_platform) == NULL)
+				*PTRRELOC(&powerpc_base_platform) = t->platform;
+
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
 			/* ppc64 and booke expect identify_cpu to also call
 			 * setup_cpu for that processor. I will consolidate
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index e0debcca0bf..a323c9b32ee 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -86,6 +86,19 @@ static int __init parse_savemaxmem(char *p)
 }
 __setup("savemaxmem=", parse_savemaxmem);
 
+
+static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
+                               unsigned long offset, int userbuf)
+{
+	if (userbuf) {
+		if (copy_to_user((char __user *)buf, (vaddr + offset), csize))
+			return -EFAULT;
+	} else
+		memcpy(buf, (vaddr + offset), csize);
+
+	return csize;
+}
+
 /**
  * copy_oldmem_page - copy one page from "oldmem"
  * @pfn: page frame number to be copied
@@ -107,16 +120,16 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!csize)
 		return 0;
 
-	vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+	csize = min(csize, PAGE_SIZE);
 
-	if (userbuf) {
-		if (copy_to_user((char __user *)buf, (vaddr + offset), csize)) {
-			iounmap(vaddr);
-			return -EFAULT;
-		}
-	} else
-		memcpy(buf, (vaddr + offset), csize);
+	if (pfn < max_pfn) {
+		vaddr = __va(pfn << PAGE_SHIFT);
+		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+	} else {
+		vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+		iounmap(vaddr);
+	}
 
-	iounmap(vaddr);
 	return csize;
 }
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index da52269aec1..1cbbf703364 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -343,7 +343,12 @@ syscall_dotrace:
 	stw	r0,_TRAP(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_enter
-	lwz	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	lwz	r3,GPR3(r1)
 	lwz	r4,GPR4(r1)
 	lwz	r5,GPR5(r1)
@@ -1055,8 +1060,8 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	SAVE_NVGPRS(r1)
 	rlwinm	r3,r3,0,0,30
 	stw	r3,_TRAP(r1)
-2:	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+2:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r9
 	bl	do_signal
 	REST_NVGPRS(r1)
 	b	recheck
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d7369243ae4..2d802e97097 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -214,7 +214,12 @@ syscall_dotrace:
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_syscall_trace_enter
-	ld	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for the call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	ld	r3,GPR3(r1)
 	ld	r4,GPR4(r1)
 	ld	r5,GPR5(r1)
@@ -638,8 +643,7 @@ user_work:
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
-	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_signal
 	b	.ret_from_except
 
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 99ee2f0f0f2..8bb65751929 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1155,7 +1155,7 @@ flush_tlbs:
 	lis	r10, 0x40
 1:	addic.	r10, r10, -0x1000
 	tlbie	r10
-	blt	1b
+	bgt	1b
 	sync
 	blr
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index c4268500e85..3cb52fa0eda 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -151,16 +151,11 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB0 */
 	li	r6,0x04
 	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
+	TLBSYNC
 	/* Invalidate TLB1 */
 	li	r6,0x0c
 	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 /* 3. Setup a temp mapping and jump to it */
 	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
@@ -238,10 +233,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB1 */
 	li	r9,0x0c
 	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 /* 6. Setup KERNELBASE mapping in TLB1[0] */
 	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
@@ -283,10 +275,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB1 */
 	li	r9,0x0c
 	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
@@ -483,90 +472,16 @@ interrupt_base:
 
 	/* Data Storage Interrupt */
 	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, PAGE_OFFSET@h
-	cmplw	0, r10, r11
-	bge	2f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	FIND_PTE
-
-	/* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
-	andi.	r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
-	cmpwi	0, r13, _PAGE_RW|_PAGE_USER
-	bne	2f			/* Bail if not */
-
-	/* Update 'changed'. */
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
-
-	/* MAS2 not updated as the entry does exist in the tlb, this
-	   fault taken to detect state transition (eg: COW -> DIRTY)
-	 */
-	andi.	r11, r11, _PAGE_HWEXEC
-	rlwimi	r11, r11, 31, 27, 27	/* SX <- _PAGE_HWEXEC */
-	ori	r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
-
-	/* update search PID in MAS6, AS = 0 */
-	mfspr	r12, SPRN_PID0
-	slwi	r12, r12, 16
-	mtspr	SPRN_MAS6, r12
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	0, r10
-
-	/* only update the perm bits, assume the RPN is fine */
-	mfspr	r12, SPRN_MAS3
-	rlwimi	r12, r11, 0, 20, 31
-	mtspr	SPRN_MAS3,r12
-	tlbwe
-
-	/* Done...restore registers and get out of here.  */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
+	bne	1f
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+1:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
 
 	/* Instruction Storage Interrupt */
 	INSTRUCTION_STORAGE_EXCEPTION
@@ -645,15 +560,30 @@ interrupt_base:
 	lwz	r11,PGDIR(r11)
 
 4:
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,11,29,29
+
 	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	andc.	r13,r13,r11		/* Check permission */
+	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
 	lwz	r13, 0(r12)
 #endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
 
 	 /* Jump to common tlb load */
 	b	finish_tlb_load
@@ -667,7 +597,7 @@ interrupt_base:
 	mfspr	r12, SPRN_SPRG4R
 	mfspr	r11, SPRN_SPRG1
 	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
 	/*
@@ -705,15 +635,16 @@ interrupt_base:
 	lwz	r11,PGDIR(r11)
 
 4:
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+
 	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	andc.	r13,r13,r11		/* Check permission */
+	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
 	lwz	r13, 0(r12)
 #endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
 
 	/* Jump to common TLB load point */
 	b	finish_tlb_load
@@ -768,29 +699,13 @@ interrupt_base:
  * Local functions
  */
 
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
-	bne	1f
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-1:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
-
 /*
-
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  *	r10 - EA of fault
  *	r11 - TLB (info from Linux PTE)
- *	r12, r13 - available to use
+ *	r12 - available to use
+ *	r13 - upper bits of PTE (if PTE_64BIT) or available to use
  *	CR5 - results of addr >= PAGE_OFFSET
  *	MAS0, MAS1 - loaded with proper value when we get here
  *	MAS2, MAS3 - will need additional info from Linux PTE
@@ -812,20 +727,14 @@ finish_tlb_load:
 #endif
 	mtspr	SPRN_MAS2, r12
 
-	bge	5, 1f
-
-	/* is user addr */
-	andi.	r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
+	li	r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
+	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
+	and	r12, r11, r10
 	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
-	srwi	r10, r12, 1
-	or	r12, r12, r10	/* Copy user perms into supervisor */
-	iseleq	r12, 0, r12
-	b	2f
-
-	/* is kernel addr */
-1:	rlwinm	r12, r11, 31, 29, 29	/* Extract _PAGE_HWWRITE into SW */
-	ori	r12, r12, (MAS3_SX | MAS3_SR)
-
+	slwi	r10, r12, 1
+	or	r10, r10, r12
+	iseleq	r12, r12, r10
+	
 #ifdef CONFIG_PTE_64BIT
 2:	rlwimi	r12, r13, 24, 0, 7	/* grab RPN[32:39] */
 	rlwimi	r12, r11, 24, 8, 19	/* grab RPN[40:51] */
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 9d42eb57aea..a06362223f8 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -233,17 +233,6 @@ void ibmebus_free_irq(u32 ist, void *dev_id)
 }
 EXPORT_SYMBOL(ibmebus_free_irq);
 
-static ssize_t name_show(struct device *dev,
-			 struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%s\n", to_of_device(dev)->node->name);
-}
-
-static struct device_attribute ibmebus_dev_attrs[] = {
-	__ATTR_RO(name),
-	__ATTR_NULL
-};
-
 static char *ibmebus_chomp(const char *in, size_t count)
 {
 	char *out = kmalloc(count + 1, GFP_KERNEL);
@@ -327,7 +316,6 @@ static struct bus_attribute ibmebus_bus_attrs[] = {
 
 struct bus_type ibmebus_bus_type = {
 	.uevent    = of_device_uevent,
-	.dev_attrs = ibmebus_dev_attrs,
 	.bus_attrs = ibmebus_bus_attrs
 };
 EXPORT_SYMBOL(ibmebus_bus_type);
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index c3cf0e8f3ac..d308a9f70f1 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -60,7 +60,7 @@ void cpu_idle(void)
 
 	set_thread_flag(TIF_POLLING_NRFLAG);
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched() && !cpu_should_die()) {
 			ppc64_runlatch_off();
 
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 019b02d8844..15c611de1ee 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -158,7 +158,7 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r11,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 06304034b39..47a1a983ff8 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -84,10 +84,11 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r1,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
 	li	r11,0
 #endif
+
 	b	transfer_to_handler_cont
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8c68ee9e5d1..550a19399bf 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -49,6 +49,8 @@ static int novmerge = 1;
 
 static int protect4gb = 1;
 
+static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
+
 static inline unsigned long iommu_num_pages(unsigned long vaddr,
 					    unsigned long slen)
 {
@@ -186,10 +188,12 @@ static unsigned long iommu_range_alloc(struct device *dev,
 static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 			      void *page, unsigned int npages,
 			      enum dma_data_direction direction,
-			      unsigned long mask, unsigned int align_order)
+			      unsigned long mask, unsigned int align_order,
+			      struct dma_attrs *attrs)
 {
 	unsigned long entry, flags;
 	dma_addr_t ret = DMA_ERROR_CODE;
+	int build_fail;
 
 	spin_lock_irqsave(&(tbl->it_lock), flags);
 
@@ -204,9 +208,21 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 	ret = entry << IOMMU_PAGE_SHIFT;	/* Set the return dma address */
 
 	/* Put the TCEs in the HW table */
-	ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK,
-			 direction);
+	build_fail = ppc_md.tce_build(tbl, entry, npages,
+	                              (unsigned long)page & IOMMU_PAGE_MASK,
+	                              direction, attrs);
+
+	/* ppc_md.tce_build() only returns non-zero for transient errors.
+	 * Clean up the table bitmap in this case and return
+	 * DMA_ERROR_CODE. For all other errors the functionality is
+	 * not altered.
+	 */
+	if (unlikely(build_fail)) {
+		__iommu_free(tbl, ret, npages);
 
+		spin_unlock_irqrestore(&(tbl->it_lock), flags);
+		return DMA_ERROR_CODE;
+	}
 
 	/* Flush/invalidate TLB caches if necessary */
 	if (ppc_md.tce_flush)
@@ -275,7 +291,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
 	struct scatterlist *s, *outs, *segstart;
-	int outcount, incount, i;
+	int outcount, incount, i, build_fail = 0;
 	unsigned int align;
 	unsigned long handle;
 	unsigned int max_seg_size;
@@ -336,7 +352,11 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 			    npages, entry, dma_addr);
 
 		/* Insert into HW table */
-		ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK, direction);
+		build_fail = ppc_md.tce_build(tbl, entry, npages,
+		                              vaddr & IOMMU_PAGE_MASK,
+		                              direction, attrs);
+		if(unlikely(build_fail))
+			goto failure;
 
 		/* If we are in an open segment, try merging */
 		if (segstart != s) {
@@ -573,7 +593,8 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 			align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
 
 		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction,
-					 mask >> IOMMU_PAGE_SHIFT, align);
+					 mask >> IOMMU_PAGE_SHIFT, align,
+					 attrs);
 		if (dma_handle == DMA_ERROR_CODE) {
 			if (printk_ratelimit())  {
 				printk(KERN_INFO "iommu_alloc failed, "
@@ -642,7 +663,7 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
 	nio_pages = size >> IOMMU_PAGE_SHIFT;
 	io_order = get_iommu_order(size);
 	mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL,
-			      mask >> IOMMU_PAGE_SHIFT, io_order);
+			      mask >> IOMMU_PAGE_SHIFT, io_order, NULL);
 	if (mapping == DMA_ERROR_CODE) {
 		free_pages((unsigned long)ret, order);
 		return NULL;
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 6ac8612da3c..d972decf032 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -77,22 +77,12 @@ static int ppc_spurious_interrupts;
 EXPORT_SYMBOL(__irq_offset_value);
 atomic_t ppc_n_lost_interrupts;
 
-#ifndef CONFIG_PPC_MERGE
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-#endif
-
 #ifdef CONFIG_TAU_INT
 extern int tau_initialized;
 extern int tau_interrupts(int);
 #endif
 #endif /* CONFIG_PPC32 */
 
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-extern atomic_t ipi_recv;
-extern atomic_t ipi_sent;
-#endif
-
 #ifdef CONFIG_PPC64
 EXPORT_SYMBOL(irq_desc);
 
@@ -216,21 +206,14 @@ int show_interrupts(struct seq_file *p, void *v)
 skip:
 		spin_unlock_irqrestore(&desc->lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_PPC32
-#ifdef CONFIG_TAU_INT
+#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
 		if (tau_initialized){
 			seq_puts(p, "TAU: ");
 			for_each_online_cpu(j)
 				seq_printf(p, "%10u ", tau_interrupts(j));
 			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
 		}
-#endif
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-		/* should this be per processor send/receive? */
-		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
-				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
-#endif
-#endif /* CONFIG_PPC32 */
+#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
 		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
 	}
 	return 0;
@@ -454,8 +437,6 @@ void do_softirq(void)
  * IRQ controller and virtual interrupts
  */
 
-#ifdef CONFIG_PPC_MERGE
-
 static LIST_HEAD(irq_hosts);
 static DEFINE_SPINLOCK(irq_big_lock);
 static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
@@ -1114,8 +1095,6 @@ static int __init irq_debugfs_init(void)
 __initcall(irq_debugfs_init);
 #endif /* CONFIG_VIRQ_DEBUG */
 
-#endif /* CONFIG_PPC_MERGE */
-
 #ifdef CONFIG_PPC64
 static int __init setup_noirqdistrib(char *str)
 {
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
new file mode 100644
index 00000000000..fe8f71dd0b3
--- /dev/null
+++ b/arch/powerpc/kernel/kgdb.c
@@ -0,0 +1,409 @@
+/*
+ * PowerPC backend to the KGDB stub.
+ *
+ * 1998 (c) Michael AK Tesch (tesch@cs.wisc.edu)
+ * Copyright (C) 2003 Timesys Corporation.
+ * Copyright (C) 2004-2006 MontaVista Software, Inc.
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC32 support restored by Vitaly Wool <vwool@ru.mvista.com> and
+ * Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ * Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program as licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/smp.h>
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands.  GDB and the kernel
+ * don't always agree on values, so we use constants taken from gdb-6.2.
+ */
+static struct hard_trap_info
+{
+	unsigned int tt;		/* Trap type code for powerpc */
+	unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 0x0100, 0x02 /* SIGINT */  },		/* system reset */
+	{ 0x0200, 0x0b /* SIGSEGV */ },		/* machine check */
+	{ 0x0300, 0x0b /* SIGSEGV */ },		/* data access */
+	{ 0x0400, 0x0b /* SIGSEGV */ },		/* instruction access */
+	{ 0x0500, 0x02 /* SIGINT */  },		/* external interrupt */
+	{ 0x0600, 0x0a /* SIGBUS */  },		/* alignment */
+	{ 0x0700, 0x05 /* SIGTRAP */ },		/* program check */
+	{ 0x0800, 0x08 /* SIGFPE */  },		/* fp unavailable */
+	{ 0x0900, 0x0e /* SIGALRM */ },		/* decrementer */
+	{ 0x0c00, 0x14 /* SIGCHLD */ },		/* system call */
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+	{ 0x2002, 0x05 /* SIGTRAP */ },		/* debug */
+#if defined(CONFIG_FSL_BOOKE)
+	{ 0x2010, 0x08 /* SIGFPE */  },		/* spe unavailable */
+	{ 0x2020, 0x08 /* SIGFPE */  },		/* spe unavailable */
+	{ 0x2030, 0x08 /* SIGFPE */  },		/* spe fp data */
+	{ 0x2040, 0x08 /* SIGFPE */  },		/* spe fp data */
+	{ 0x2050, 0x08 /* SIGFPE */  },		/* spe fp round */
+	{ 0x2060, 0x0e /* SIGILL */  },		/* performace monitor */
+	{ 0x2900, 0x08 /* SIGFPE */  },		/* apu unavailable */
+	{ 0x3100, 0x0e /* SIGALRM */ },		/* fixed interval timer */
+	{ 0x3200, 0x02 /* SIGINT */  }, 	/* watchdog */
+#else /* ! CONFIG_FSL_BOOKE */
+	{ 0x1000, 0x0e /* SIGALRM */ },		/* prog interval timer */
+	{ 0x1010, 0x0e /* SIGALRM */ },		/* fixed interval timer */
+	{ 0x1020, 0x02 /* SIGINT */  }, 	/* watchdog */
+	{ 0x2010, 0x08 /* SIGFPE */  },		/* fp unavailable */
+	{ 0x2020, 0x08 /* SIGFPE */  },		/* ap unavailable */
+#endif
+#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */
+	{ 0x0d00, 0x05 /* SIGTRAP */ },		/* single-step */
+#if defined(CONFIG_8xx)
+	{ 0x1000, 0x04 /* SIGILL */  },		/* software emulation */
+#else /* ! CONFIG_8xx */
+	{ 0x0f00, 0x04 /* SIGILL */  },		/* performance monitor */
+	{ 0x0f20, 0x08 /* SIGFPE */  },		/* altivec unavailable */
+	{ 0x1300, 0x05 /* SIGTRAP */ }, 	/* instruction address break */
+#if defined(CONFIG_PPC64)
+	{ 0x1200, 0x05 /* SIGILL */  },		/* system error */
+	{ 0x1500, 0x04 /* SIGILL */  },		/* soft patch */
+	{ 0x1600, 0x04 /* SIGILL */  },		/* maintenance */
+	{ 0x1700, 0x08 /* SIGFPE */  },		/* altivec assist */
+	{ 0x1800, 0x04 /* SIGILL */  },		/* thermal */
+#else /* ! CONFIG_PPC64 */
+	{ 0x1400, 0x02 /* SIGINT */  },		/* SMI */
+	{ 0x1600, 0x08 /* SIGFPE */  },		/* altivec assist */
+	{ 0x1700, 0x04 /* SIGILL */  },		/* TAU */
+	{ 0x2000, 0x05 /* SIGTRAP */ },		/* run mode */
+#endif
+#endif
+#endif
+	{ 0x0000, 0x00 }			/* Must be last */
+};
+
+static int computeSignal(unsigned int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+static int kgdb_call_nmi_hook(struct pt_regs *regs)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), regs);
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	smp_send_debugger_break(MSG_ALL_BUT_SELF);
+}
+#endif
+
+/* KGDB functions to use existing PowerPC64 hooks. */
+static int kgdb_debugger(struct pt_regs *regs)
+{
+	return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+}
+
+static int kgdb_handle_breakpoint(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+		return 0;
+
+	if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+		regs->nip += 4;
+
+	return 1;
+}
+
+static int kgdb_singlestep(struct pt_regs *regs)
+{
+	struct thread_info *thread_info, *exception_thread_info;
+
+	if (user_mode(regs))
+		return 0;
+
+	/*
+	 * On Book E and perhaps other processsors, singlestep is handled on
+	 * the critical exception stack.  This causes current_thread_info()
+	 * to fail, since it it locates the thread_info by masking off
+	 * the low bits of the current stack pointer.  We work around
+	 * this issue by copying the thread_info from the kernel stack
+	 * before calling kgdb_handle_exception, and copying it back
+	 * afterwards.  On most processors the copy is avoided since
+	 * exception_thread_info == thread_info.
+	 */
+	thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
+	exception_thread_info = current_thread_info();
+
+	if (thread_info != exception_thread_info)
+		memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
+
+	if (thread_info != exception_thread_info)
+		memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+
+	return 1;
+}
+
+static int kgdb_iabr_match(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+		return 0;
+	return 1;
+}
+
+static int kgdb_dabr_match(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+		return 0;
+	return 1;
+}
+
+#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0)
+
+#define PACK32(ptr, src) do {          \
+	u32 *ptr32;                   \
+	ptr32 = (u32 *)ptr;           \
+	*(ptr32++) = (src);           \
+	ptr = (unsigned long *)ptr32; \
+	} while (0)
+
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long *ptr = gdb_regs;
+	int reg;
+
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, current->thread.evr[reg]);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(long);
+#endif
+
+	PACK64(ptr, regs->nip);
+	PACK64(ptr, regs->msr);
+	PACK32(ptr, regs->ccr);
+	PACK64(ptr, regs->link);
+	PACK64(ptr, regs->ctr);
+	PACK32(ptr, regs->xer);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp +
+						  STACK_FRAME_OVERHEAD);
+	unsigned long *ptr = gdb_regs;
+	int reg;
+
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	/* Regs GPR0-2 */
+	for (reg = 0; reg < 3; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+	/* Regs GPR3-13 are caller saved, not in regs->gpr[] */
+	ptr += 11;
+
+	/* Regs GPR14-31 */
+	for (reg = 14; reg < 32; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, p->thread.evr[reg]);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(long);
+#endif
+
+	PACK64(ptr, regs->nip);
+	PACK64(ptr, regs->msr);
+	PACK32(ptr, regs->ccr);
+	PACK64(ptr, regs->link);
+	PACK64(ptr, regs->ctr);
+	PACK32(ptr, regs->xer);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0)
+
+#define UNPACK32(dest, ptr) do {       \
+	u32 *ptr32;                   \
+	ptr32 = (u32 *)ptr;           \
+	dest = *(ptr32++);            \
+	ptr = (unsigned long *)ptr32; \
+	} while (0)
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long *ptr = gdb_regs;
+	int reg;
+#ifdef CONFIG_SPE
+	union {
+		u32 v32[2];
+		u64 v64;
+	} acc;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		UNPACK64(regs->gpr[reg], ptr);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		UNPACK64(current->thread.evr[reg], ptr);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(int);
+#endif
+
+	UNPACK64(regs->nip, ptr);
+	UNPACK64(regs->msr, ptr);
+	UNPACK32(regs->ccr, ptr);
+	UNPACK64(regs->link, ptr);
+	UNPACK64(regs->ctr, ptr);
+	UNPACK32(regs->xer, ptr);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+/*
+ * This function does PowerPC specific procesing for interfacing to gdb.
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long addr;
+
+	switch (remcom_in_buffer[0]) {
+		/*
+		 * sAA..AA   Step one instruction from AA..AA
+		 * This will return an error to gdb ..
+		 */
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->nip = addr;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		/* set the trace bit if we're stepping */
+		if (remcom_in_buffer[0] == 's') {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+			mtspr(SPRN_DBCR0,
+			      mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+			linux_regs->msr |= MSR_DE;
+#else
+			linux_regs->msr |= MSR_SE;
+#endif
+			kgdb_single_step = 1;
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
+		}
+		return 0;
+	}
+
+	return -1;
+}
+
+/*
+ * Global data
+ */
+struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08},
+};
+
+static int kgdb_not_implemented(struct pt_regs *regs)
+{
+	return 0;
+}
+
+static void *old__debugger_ipi;
+static void *old__debugger;
+static void *old__debugger_bpt;
+static void *old__debugger_sstep;
+static void *old__debugger_iabr_match;
+static void *old__debugger_dabr_match;
+static void *old__debugger_fault_handler;
+
+int kgdb_arch_init(void)
+{
+	old__debugger_ipi = __debugger_ipi;
+	old__debugger = __debugger;
+	old__debugger_bpt = __debugger_bpt;
+	old__debugger_sstep = __debugger_sstep;
+	old__debugger_iabr_match = __debugger_iabr_match;
+	old__debugger_dabr_match = __debugger_dabr_match;
+	old__debugger_fault_handler = __debugger_fault_handler;
+
+	__debugger_ipi = kgdb_call_nmi_hook;
+	__debugger = kgdb_debugger;
+	__debugger_bpt = kgdb_handle_breakpoint;
+	__debugger_sstep = kgdb_singlestep;
+	__debugger_iabr_match = kgdb_iabr_match;
+	__debugger_dabr_match = kgdb_dabr_match;
+	__debugger_fault_handler = kgdb_not_implemented;
+
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+	__debugger_ipi = old__debugger_ipi;
+	__debugger = old__debugger;
+	__debugger_bpt = old__debugger_bpt;
+	__debugger_sstep = old__debugger_sstep;
+	__debugger_iabr_match = old__debugger_iabr_match;
+	__debugger_dabr_match = old__debugger_dabr_match;
+	__debugger_fault_handler = old__debugger_fault_handler;
+}
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 4ba2af12545..de79915452c 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -144,7 +144,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	kcb->kprobe_saved_msr = regs->msr;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -312,8 +311,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -352,7 +350,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->nip = orig_ret_address;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4d96e1db55e..9ddfaef1a18 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -493,18 +493,18 @@ static int __init serial_dev_init(void)
 device_initcall(serial_dev_init);
 
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
 /*
  * This is called very early, as part of console_init() (typically just after
  * time_init()). This function is respondible for trying to find a good
  * default console on serial ports. It tries to match the open firmware
- * default output with one of the available serial console drivers, either
- * one of the platform serial ports that have been probed earlier by
- * find_legacy_serial_ports() or some more platform specific ones.
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
  */
 static int __init check_legacy_serial_console(void)
 {
 	struct device_node *prom_stdout = NULL;
-	int speed = 0, offset = 0;
+	int i, speed = 0, offset = 0;
 	const char *name;
 	const u32 *spd;
 
@@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void)
 	if (spd)
 		speed = *spd;
 
-	if (0)
-		;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	else if (strcmp(name, "serial") == 0) {
-		int i;
-		/* Look for it in probed array */
-		for (i = 0; i < legacy_serial_count; i++) {
-			if (prom_stdout != legacy_serial_infos[i].np)
-				continue;
-			offset = i;
-			speed = legacy_serial_infos[i].speed;
-			break;
-		}
-		if (i >= legacy_serial_count)
-			goto not_found;
+	if (strcmp(name, "serial") != 0)
+		goto not_found;
+
+	/* Look for it in probed array */
+	for (i = 0; i < legacy_serial_count; i++) {
+		if (prom_stdout != legacy_serial_infos[i].np)
+			continue;
+		offset = i;
+		speed = legacy_serial_infos[i].speed;
+		break;
 	}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-	else if (strcmp(name, "ch-a") == 0)
-		offset = 0;
-	else if (strcmp(name, "ch-b") == 0)
-		offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-	else
+	if (i >= legacy_serial_count)
 		goto not_found;
+
 	of_node_put(prom_stdout);
 
 	DBG("Found serial console at ttyS%d\n", offset);
@@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void)
 }
 console_initcall(check_legacy_serial_console);
 
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 827a5726a03..b3eef30b513 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -34,8 +34,9 @@
 #include <asm/time.h>
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
+#include <asm/vio.h>
 
-#define MODULE_VERS "1.7"
+#define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -129,32 +130,46 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-static void log_plpar_hcall_return(unsigned long rc, char *tag)
+/**
+ * h_get_mpp
+ * H_GET_MPP hcall returns info in 7 parms
+ */
+int h_get_mpp(struct hvcall_mpp_data *mpp_data)
 {
-	switch(rc) {
-	case 0:
-		return;
-	case H_HARDWARE:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Hardware fault\n", tag);
-		return;
-	case H_FUNCTION:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Function not allowed\n", tag);
-		return;
-	case H_AUTHORITY:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Not authorized to this function\n", tag);
-		return;
-	case H_PARAMETER:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Bad parameter(s)\n",tag);
-		return;
-	default:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Unexpected rc(0x%lx)\n", tag, rc);
-	}
+	int rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9(H_GET_MPP, retbuf);
+
+	mpp_data->entitled_mem = retbuf[0];
+	mpp_data->mapped_mem = retbuf[1];
+
+	mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	mpp_data->pool_num = retbuf[2] & 0xffff;
+
+	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
+	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
+	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+
+	mpp_data->pool_size = retbuf[4];
+	mpp_data->loan_request = retbuf[5];
+	mpp_data->backing_mem = retbuf[6];
+
+	return rc;
 }
+EXPORT_SYMBOL(h_get_mpp);
+
+struct hvcall_ppp_data {
+	u64	entitlement;
+	u64	unallocated_entitlement;
+	u16	group_num;
+	u16	pool_num;
+	u8	capped;
+	u8	weight;
+	u8	unallocated_weight;
+	u16	active_procs_in_pool;
+	u16	active_system_procs;
+};
 
 /*
  * H_GET_PPP hcall returns info in 4 parms.
@@ -176,27 +191,30 @@ static void log_plpar_hcall_return(unsigned long rc, char *tag)
  *              XXXX - Active processors in Physical Processor Pool.
  *                  XXXX  - Processors active on platform.
  */
-static unsigned int h_get_ppp(unsigned long *entitled,
-			      unsigned long *unallocated,
-			      unsigned long *aggregation,
-			      unsigned long *resource)
+static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
 	rc = plpar_hcall(H_GET_PPP, retbuf);
 
-	*entitled = retbuf[0];
-	*unallocated = retbuf[1];
-	*aggregation = retbuf[2];
-	*resource = retbuf[3];
+	ppp_data->entitlement = retbuf[0];
+	ppp_data->unallocated_entitlement = retbuf[1];
 
-	log_plpar_hcall_return(rc, "H_GET_PPP");
+	ppp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	ppp_data->pool_num = retbuf[2] & 0xffff;
+
+	ppp_data->capped = (retbuf[3] >> 6 * 8) & 0x01;
+	ppp_data->weight = (retbuf[3] >> 5 * 8) & 0xff;
+	ppp_data->unallocated_weight = (retbuf[3] >> 4 * 8) & 0xff;
+	ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
+	ppp_data->active_system_procs = retbuf[3] & 0xffff;
 
 	return rc;
 }
 
-static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+static unsigned h_pic(unsigned long *pool_idle_time,
+		      unsigned long *num_procs)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -206,8 +224,87 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 	*pool_idle_time = retbuf[0];
 	*num_procs = retbuf[1];
 
-	if (rc != H_AUTHORITY)
-		log_plpar_hcall_return(rc, "H_PIC");
+	return rc;
+}
+
+/*
+ * parse_ppp_data
+ * Parse out the data returned from h_get_ppp and h_pic
+ */
+static void parse_ppp_data(struct seq_file *m)
+{
+	struct hvcall_ppp_data ppp_data;
+	int rc;
+
+	rc = h_get_ppp(&ppp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "partition_entitled_capacity=%ld\n",
+	           ppp_data.entitlement);
+	seq_printf(m, "group=%d\n", ppp_data.group_num);
+	seq_printf(m, "system_active_processors=%d\n",
+	           ppp_data.active_system_procs);
+
+	/* pool related entries are apropriate for shared configs */
+	if (lppaca[0].shared_proc) {
+		unsigned long pool_idle_time, pool_procs;
+
+		seq_printf(m, "pool=%d\n", ppp_data.pool_num);
+
+		/* report pool_capacity in percentage */
+		seq_printf(m, "pool_capacity=%d\n",
+			   ppp_data.active_procs_in_pool * 100);
+
+		h_pic(&pool_idle_time, &pool_procs);
+		seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+		seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+	}
+
+	seq_printf(m, "unallocated_capacity_weight=%d\n",
+		   ppp_data.unallocated_weight);
+	seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
+	seq_printf(m, "capped=%d\n", ppp_data.capped);
+	seq_printf(m, "unallocated_capacity=%ld\n",
+		   ppp_data.unallocated_entitlement);
+}
+
+/**
+ * parse_mpp_data
+ * Parse out data returned from h_get_mpp
+ */
+static void parse_mpp_data(struct seq_file *m)
+{
+	struct hvcall_mpp_data mpp_data;
+	int rc;
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "entitled_memory=%ld\n", mpp_data.entitled_mem);
+
+	if (mpp_data.mapped_mem != -1)
+		seq_printf(m, "mapped_entitled_memory=%ld\n",
+		           mpp_data.mapped_mem);
+
+	seq_printf(m, "entitled_memory_group_number=%d\n", mpp_data.group_num);
+	seq_printf(m, "entitled_memory_pool_number=%d\n", mpp_data.pool_num);
+
+	seq_printf(m, "entitled_memory_weight=%d\n", mpp_data.mem_weight);
+	seq_printf(m, "unallocated_entitled_memory_weight=%d\n",
+	           mpp_data.unallocated_mem_weight);
+	seq_printf(m, "unallocated_io_mapping_entitlement=%ld\n",
+	           mpp_data.unallocated_entitlement);
+
+	if (mpp_data.pool_size != -1)
+		seq_printf(m, "entitled_memory_pool_size=%ld bytes\n",
+		           mpp_data.pool_size);
+
+	seq_printf(m, "entitled_memory_loan_request=%ld\n",
+	           mpp_data.loan_request);
+
+	seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
 }
 
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
@@ -313,6 +410,30 @@ static int lparcfg_count_active_processors(void)
 	return count;
 }
 
+static void pseries_cmo_data(struct seq_file *m)
+{
+	int cpu;
+	unsigned long cmo_faults = 0;
+	unsigned long cmo_fault_time = 0;
+
+	seq_printf(m, "cmo_enabled=%d\n", firmware_has_feature(FW_FEATURE_CMO));
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	for_each_possible_cpu(cpu) {
+		cmo_faults += lppaca[cpu].cmo_faults;
+		cmo_fault_time += lppaca[cpu].cmo_fault_time;
+	}
+
+	seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
+	seq_printf(m, "cmo_fault_time_usec=%lu\n",
+		   cmo_fault_time / tb_ticks_per_usec);
+	seq_printf(m, "cmo_primary_psp=%d\n", cmo_get_primary_psp());
+	seq_printf(m, "cmo_secondary_psp=%d\n", cmo_get_secondary_psp());
+	seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size());
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
 	int partition_potential_processors;
@@ -334,60 +455,13 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	partition_active_processors = lparcfg_count_active_processors();
 
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
-		unsigned long h_entitled, h_unallocated;
-		unsigned long h_aggregation, h_resource;
-		unsigned long pool_idle_time, pool_procs;
-		unsigned long purr;
-
-		h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
-			  &h_resource);
-
-		seq_printf(m, "R4=0x%lx\n", h_entitled);
-		seq_printf(m, "R5=0x%lx\n", h_unallocated);
-		seq_printf(m, "R6=0x%lx\n", h_aggregation);
-		seq_printf(m, "R7=0x%lx\n", h_resource);
-
-		purr = get_purr();
-
 		/* this call handles the ibm,get-system-parameter contents */
 		parse_system_parameter_string(m);
+		parse_ppp_data(m);
+		parse_mpp_data(m);
+		pseries_cmo_data(m);
 
-		seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
-
-		seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
-
-		seq_printf(m, "system_active_processors=%ld\n",
-			   (h_resource >> 0 * 8) & 0xffff);
-
-		/* pool related entries are apropriate for shared configs */
-		if (lppaca[0].shared_proc) {
-
-			h_pic(&pool_idle_time, &pool_procs);
-
-			seq_printf(m, "pool=%ld\n",
-				   (h_aggregation >> 0 * 8) & 0xffff);
-
-			/* report pool_capacity in percentage */
-			seq_printf(m, "pool_capacity=%ld\n",
-				   ((h_resource >> 2 * 8) & 0xffff) * 100);
-
-			seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
-
-			seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
-		}
-
-		seq_printf(m, "unallocated_capacity_weight=%ld\n",
-			   (h_resource >> 4 * 8) & 0xFF);
-
-		seq_printf(m, "capacity_weight=%ld\n",
-			   (h_resource >> 5 * 8) & 0xFF);
-
-		seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
-
-		seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
-
-		seq_printf(m, "purr=%ld\n", purr);
-
+		seq_printf(m, "purr=%ld\n", get_purr());
 	} else {		/* non SPLPAR case */
 
 		seq_printf(m, "system_active_processors=%d\n",
@@ -414,6 +488,83 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	return 0;
 }
 
+static ssize_t update_ppp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_ppp_data ppp_data;
+	u8 new_weight;
+	u64 new_entitled;
+	ssize_t retval;
+
+	/* Get our current parameters */
+	retval = h_get_ppp(&ppp_data);
+	if (retval)
+		return retval;
+
+	if (entitlement) {
+		new_weight = ppp_data.weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = ppp_data.entitlement;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, ppp_data.entitlement, ppp_data.weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+		 __FUNCTION__, new_entitled, new_weight);
+
+	retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
+	return retval;
+}
+
+/**
+ * update_mpp
+ *
+ * Update the memory entitlement and weight for the partition.  Caller must
+ * specify either a new entitlement or weight, not both, to be updated
+ * since the h_set_mpp call takes both entitlement and weight as parameters.
+ */
+static ssize_t update_mpp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_mpp_data mpp_data;
+	u64 new_entitled;
+	u8 new_weight;
+	ssize_t rc;
+
+	if (entitlement) {
+		/* Check with vio to ensure the new memory entitlement
+		 * can be handled.
+		 */
+		rc = vio_cmo_entitlement_update(*entitlement);
+		if (rc)
+			return rc;
+	}
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return rc;
+
+	if (entitlement) {
+		new_weight = mpp_data.mem_weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = mpp_data.entitled_mem;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	         __FUNCTION__, new_entitled, new_weight);
+
+	rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
+	return rc;
+}
+
 /*
  * Interface for changing system parameters (variable capacity weight
  * and entitled capacity).  Format of input is "param_name=value";
@@ -427,35 +578,27 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 			     size_t count, loff_t * off)
 {
-	char *kbuf;
+	int kbuf_sz = 64;
+	char kbuf[kbuf_sz];
 	char *tmp;
 	u64 new_entitled, *new_entitled_ptr = &new_entitled;
 	u8 new_weight, *new_weight_ptr = &new_weight;
-
-	unsigned long current_entitled;	/* parameters for h_get_ppp */
-	unsigned long dummy;
-	unsigned long resource;
-	u8 current_weight;
-
-	ssize_t retval = -ENOMEM;
+	ssize_t retval;
 
 	if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
 			firmware_has_feature(FW_FEATURE_ISERIES))
 		return -EINVAL;
 
-	kbuf = kmalloc(count, GFP_KERNEL);
-	if (!kbuf)
-		goto out;
+	if (count > kbuf_sz)
+		return -EINVAL;
 
-	retval = -EFAULT;
 	if (copy_from_user(kbuf, buf, count))
-		goto out;
+		return -EFAULT;
 
-	retval = -EINVAL;
 	kbuf[count - 1] = '\0';
 	tmp = strchr(kbuf, '=');
 	if (!tmp)
-		goto out;
+		return -EINVAL;
 
 	*tmp++ = '\0';
 
@@ -463,34 +606,32 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		char *endp;
 		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
-		new_weight_ptr = &current_weight;
+			return -EINVAL;
+
+		retval = update_ppp(new_entitled_ptr, NULL);
 	} else if (!strcmp(kbuf, "capacity_weight")) {
 		char *endp;
 		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
-		new_entitled_ptr = &current_entitled;
-	} else
-		goto out;
-
-	/* Get our current parameters */
-	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
-	if (retval) {
-		retval = -EIO;
-		goto out;
-	}
-
-	current_weight = (resource >> 5 * 8) & 0xFF;
+			return -EINVAL;
 
-	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-		 __func__, current_entitled, current_weight);
+		retval = update_ppp(NULL, new_weight_ptr);
+	} else if (!strcmp(kbuf, "entitled_memory")) {
+		char *endp;
+		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			return -EINVAL;
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-		 __func__, *new_entitled_ptr, *new_weight_ptr);
+		retval = update_mpp(new_entitled_ptr, NULL);
+	} else if (!strcmp(kbuf, "entitled_memory_weight")) {
+		char *endp;
+		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			return -EINVAL;
 
-	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
-				    *new_weight_ptr);
+		retval = update_mpp(NULL, new_weight_ptr);
+	} else
+		return -EINVAL;
 
 	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
@@ -500,14 +641,8 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EIO;
 	} else if (retval == H_PARAMETER) {
 		retval = -EINVAL;
-	} else {
-		printk(KERN_WARNING "%s: received unknown hv return code %ld",
-		       __func__, retval);
-		retval = -EIO;
 	}
 
-out:
-	kfree(kbuf);
 	return retval;
 }
 
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 29a0e039d43..aab76887a84 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	if (ppc_md.machine_kexec)
 		ppc_md.machine_kexec(image);
diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c
index cbaa3419679..ae63a964b85 100644
--- a/arch/powerpc/kernel/machine_kexec_32.c
+++ b/arch/powerpc/kernel/machine_kexec_32.c
@@ -51,7 +51,7 @@ void default_machine_kexec(struct kimage *image)
 						relocate_new_kernel_size);
 
 	flush_icache_range(reboot_code_buffer,
-				reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+				reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	/* now call it */
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 6321ae36f72..7a6dfbca768 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -899,7 +899,7 @@ relocate_new_kernel:
 
 	/* set a new stack at the bottom of our page... */
 	/* (not really needed now) */
-	addi	r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
+	addi	r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */
 	stw	r0, 0(r1)
 
 	/* Do the copies */
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index af07003573c..7ff29247526 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -99,18 +99,3 @@ void module_arch_cleanup(struct module *mod)
 {
 	module_bug_cleanup(mod);
 }
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index ee6a2982d56..1af2377e499 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -22,7 +22,6 @@
 #include <linux/vmalloc.h>
 #include <linux/bug.h>
 #include <asm/module.h>
-#include <asm/uaccess.h>
 #include <asm/firmware.h>
 #include <asm/code-patching.h>
 #include <linux/sort.h>
@@ -42,13 +41,6 @@
 #define DEBUGP(fmt , ...)
 #endif
 
-/* There's actually a third entry here, but it's unused */
-struct ppc64_opd_entry
-{
-	unsigned long funcaddr;
-	unsigned long r2;
-};
-
 /* Like PPC32, we need little trampolines to do > 24-bit jumps (into
    the kernel itself).  But on PPC64, these need to be used for every
    jump, actually, to reset r2 (TOC+0x8000). */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 063cdd41304..ea0c61e09b7 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -598,6 +598,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			res->start = pci_addr;
 			break;
 		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
 			printk(KERN_INFO
 			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
 			       cpu_addr, cpu_addr + size - 1, pci_addr,
@@ -649,11 +650,18 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 		}
 	}
 
-	/* Out of paranoia, let's put the ISA hole last if any */
-	if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) {
-		struct resource tmp = hose->mem_resources[isa_hole];
-		hose->mem_resources[isa_hole] = hose->mem_resources[memno-1];
-		hose->mem_resources[memno-1] = tmp;
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
 	}
 }
 
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 219f3634115..957bded0020 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -47,6 +47,8 @@
 #ifdef CONFIG_PPC64
 #include <asm/firmware.h>
 #endif
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
 
 extern unsigned long _get_SP(void);
 
@@ -239,21 +241,53 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+			11, SIGSEGV) == NOTIFY_STOP)
+		return;
+
+	if (debugger_dabr_match(regs))
+		return;
+
+	/* Clear the DAC and struct entries.  One shot trigger */
+#if defined(CONFIG_BOOKE)
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
+							| DBCR0_IDM));
+#endif
+
+	/* Clear the DABR */
+	set_dabr(0);
+
+	/* Deliver the signal to userspace */
+	info.si_signo = SIGTRAP;
+	info.si_errno = 0;
+	info.si_code = TRAP_HWBKPT;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGTRAP, &info, current);
+}
+
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
 int set_dabr(unsigned long dabr)
 {
 	__get_cpu_var(current_dabr) = dabr;
 
-#ifdef CONFIG_PPC_MERGE		/* XXX for now */
 	if (ppc_md.set_dabr)
 		return ppc_md.set_dabr(dabr);
-#endif
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
 #if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
 	mtspr(SPRN_DABR, dabr);
 #endif
+
+#if defined(CONFIG_BOOKE)
+	mtspr(SPRN_DAC1, dabr);
+#endif
+
 	return 0;
 }
 
@@ -337,6 +371,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
 
+#if defined(CONFIG_BOOKE)
+	/* If new thread DAC (HW breakpoint) is the same then leave it */
+	if (new->thread.dabr)
+		set_dabr(new->thread.dabr);
+#endif
+
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
@@ -525,6 +565,10 @@ void flush_thread(void)
 	if (current->thread.dabr) {
 		current->thread.dabr = 0;
 		set_dabr(0);
+
+#if defined(CONFIG_BOOKE)
+		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
+#endif
 	}
 }
 
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1ea8c8d3ce8..b72849ac7db 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt;
 static cell_t __initdata regbuf[1024];
 
 
-#define MAX_CPU_THREADS 2
-
 /*
  * Error results ... some OF calls will return "-1" on error, some
  * will return 0, some will return either. To simplify, here are
@@ -643,6 +641,11 @@ static void __init early_cmdline_parse(void)
 #else
 #define OV5_MSI			0x00
 #endif /* CONFIG_PCI_MSI */
+#ifdef CONFIG_PPC_SMLPAR
+#define OV5_CMO			0x80	/* Cooperative Memory Overcommitment */
+#else
+#define OV5_CMO			0x00
+#endif
 
 /*
  * The architecture vector has an array of PVR mask/value pairs,
@@ -687,10 +690,12 @@ static unsigned char ibm_architecture_vec[] = {
 	0,				/* don't halt */
 
 	/* option vector 5: PAPR/OF options */
-	3 - 2,				/* length */
+	5 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,
+	0,
+	OV5_CMO,
 };
 
 /* Old method - ELF header with PT_NOTE sections */
@@ -1332,10 +1337,6 @@ static void __init prom_hold_cpus(void)
 	unsigned int reg;
 	phandle node;
 	char type[64];
-	int cpuid = 0;
-	unsigned int interrupt_server[MAX_CPU_THREADS];
-	unsigned int cpu_threads, hw_cpu_num;
-	int propsize;
 	struct prom_t *_prom = &RELOC(prom);
 	unsigned long *spinloop
 		= (void *) LOW_ADDR(__secondary_hold_spinloop);
@@ -1379,7 +1380,6 @@ static void __init prom_hold_cpus(void)
 		reg = -1;
 		prom_getprop(node, "reg", &reg, sizeof(reg));
 
-		prom_debug("\ncpuid        = 0x%x\n", cpuid);
 		prom_debug("cpu hw idx   = 0x%x\n", reg);
 
 		/* Init the acknowledge var which will be reset by
@@ -1388,28 +1388,9 @@ static void __init prom_hold_cpus(void)
 		 */
 		*acknowledge = (unsigned long)-1;
 
-		propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s",
-					&interrupt_server,
-					sizeof(interrupt_server));
-		if (propsize < 0) {
-			/* no property.  old hardware has no SMT */
-			cpu_threads = 1;
-			interrupt_server[0] = reg; /* fake it with phys id */
-		} else {
-			/* We have a threaded processor */
-			cpu_threads = propsize / sizeof(u32);
-			if (cpu_threads > MAX_CPU_THREADS) {
-				prom_printf("SMT: too many threads!\n"
-					    "SMT: found %x, max is %x\n",
-					    cpu_threads, MAX_CPU_THREADS);
-				cpu_threads = 1; /* ToDo: panic? */
-			}
-		}
-
-		hw_cpu_num = interrupt_server[0];
-		if (hw_cpu_num != _prom->cpu) {
+		if (reg != _prom->cpu) {
 			/* Primary Thread of non-boot cpu */
-			prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg);
+			prom_printf("starting cpu hw idx %x... ", reg);
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
 
@@ -1424,17 +1405,10 @@ static void __init prom_hold_cpus(void)
 		}
 #ifdef CONFIG_SMP
 		else
-			prom_printf("%x : boot cpu     %x\n", cpuid, reg);
+			prom_printf("boot cpu hw idx %x\n", reg);
 #endif /* CONFIG_SMP */
-
-		/* Reserve cpu #s for secondary threads.   They start later. */
-		cpuid += cpu_threads;
 	}
 
-	if (cpuid > NR_CPUS)
-		prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
-			    ") exceeded: ignoring extras\n");
-
 	prom_debug("prom_hold_cpus: end...\n");
 }
 
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 90eb3a3e383..bc1fb27368a 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -128,12 +128,35 @@ static void of_bus_pci_count_cells(struct device_node *np,
 		*sizec = 2;
 }
 
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+	unsigned int flags = 0;
+	u32 w = addr[0];
+
+	switch((w >> 24) & 0x03) {
+	case 0x01:
+		flags |= IORESOURCE_IO;
+		break;
+	case 0x02: /* 32 bits */
+	case 0x03: /* 64 bits */
+		flags |= IORESOURCE_MEM;
+		break;
+	}
+	if (w & 0x40000000)
+		flags |= IORESOURCE_PREFETCH;
+	return flags;
+}
+
 static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 {
 	u64 cp, s, da;
+	unsigned int af, rf;
+
+	af = of_bus_pci_get_flags(addr);
+	rf = of_bus_pci_get_flags(range);
 
 	/* Check address type match */
-	if ((addr[0] ^ range[0]) & 0x03000000)
+	if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
 		return OF_BAD_ADDR;
 
 	/* Read address values, skipping high cell */
@@ -153,25 +176,6 @@ static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
 	return of_bus_default_translate(addr + 1, offset, na - 1);
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	switch((w >> 24) & 0x03) {
-	case 0x01:
-		flags |= IORESOURCE_IO;
-		break;
-	case 0x02: /* 32 bits */
-	case 0x03: /* 64 bits */
-		flags |= IORESOURCE_MEM;
-		break;
-	}
-	if (w & 0x40000000)
-		flags |= IORESOURCE_PREFETCH;
-	return flags;
-}
-
 const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
 			unsigned int *flags)
 {
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 8feb93e7890..3635be61f89 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/user.h>
 #include <linux/security.h>
@@ -374,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
 	flush_vsx_to_thread(target);
 
 	for (i = 0; i < 32 ; i++)
-		buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -393,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
 	for (i = 0; i < 32 ; i++)
-		current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+		target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 
 	return ret;
@@ -703,7 +704,7 @@ void user_enable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC;
+		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
 #else
 		regs->msr |= MSR_SE;
@@ -716,9 +717,16 @@ void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
+
+#if defined(CONFIG_BOOKE)
+	/* If DAC then do not single step, skip */
+	if (task->thread.dabr)
+		return;
+#endif
+
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = 0;
+		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
 		regs->msr &= ~MSR_SE;
@@ -727,22 +735,76 @@ void user_disable_single_step(struct task_struct *task)
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 			       unsigned long data)
 {
-	/* We only support one DABR and no IABRS at the moment */
+	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+	 *  For embedded processors we support one DAC and no IAC's at the
+	 *  moment.
+	 */
 	if (addr > 0)
 		return -EINVAL;
 
-	/* The bottom 3 bits are flags */
+	/* The bottom 3 bits in dabr are flags */
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-	/* Ensure translation is on */
+#ifndef CONFIG_BOOKE
+
+	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+	 *  It was assumed, on previous implementations, that 3 bits were
+	 *  passed together with the data address, fitting the design of the
+	 *  DABR register, as follows:
+	 *
+	 *  bit 0: Read flag
+	 *  bit 1: Write flag
+	 *  bit 2: Breakpoint translation
+	 *
+	 *  Thus, we use them here as so.
+	 */
+
+	/* Ensure breakpoint translation bit is set */
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
 
+	/* Move contents to the DABR register */
 	task->thread.dabr = data;
+
+#endif
+#if defined(CONFIG_BOOKE)
+
+	/* As described above, it was assumed 3 bits were passed with the data
+	 *  address, but we will assume only the mode bits will be passed
+	 *  as to not cause alignment restrictions for DAC-based processors.
+	 */
+
+	/* DAC's hold the whole address without any mode flags */
+	task->thread.dabr = data & ~0x3UL;
+
+	if (task->thread.dabr == 0) {
+		task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
+		task->thread.regs->msr &= ~MSR_DE;
+		return 0;
+	}
+
+	/* Read or Write bits must be set */
+
+	if (!(data & 0x3UL))
+		return -EINVAL;
+
+	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
+	   register */
+	task->thread.dbcr0 = DBCR0_IDM;
+
+	/* Check for write and read flags and set DBCR0
+	   accordingly */
+	if (data & 0x1UL)
+		task->thread.dbcr0 |= DBSR_DAC1R;
+	if (data & 0x2UL)
+		task->thread.dbcr0 |= DBSR_DAC1W;
+
+	task->thread.regs->msr |= MSR_DE;
+#endif
 	return 0;
 }
 
@@ -913,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_GETVSRREGS:
 		return copy_regset_to_user(child, &user_ppc_native_view,
 					   REGSET_VSX,
-					   0, (32 * sizeof(vector128) +
-					       sizeof(u32)),
+					   0, 32 * sizeof(double),
 					   (void __user *) data);
 
 	case PTRACE_SETVSRREGS:
 		return copy_regset_from_user(child, &user_ppc_native_view,
 					     REGSET_VSX,
-					     0, (32 * sizeof(vector128) +
-						 sizeof(u32)),
+					     0, 32 * sizeof(double),
 					     (const void __user *) data);
 #endif
 #ifdef CONFIG_SPE
@@ -953,31 +1013,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-static void do_syscall_trace(void)
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
+	long ret = 0;
 
-void do_syscall_trace_enter(struct pt_regs *regs)
-{
 	secure_computing(regs->gpr[0]);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->gpr[0].
+		 */
+		ret = -1L;
 
 	if (unlikely(current->audit_context)) {
 #ifdef CONFIG_PPC64
@@ -995,16 +1048,19 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 					    regs->gpr[5] & 0xffffffff,
 					    regs->gpr[6] & 0xffffffff);
 	}
+
+	return ret ?: regs->gpr[0];
 }
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context))
 		audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 67bf1a1e7e1..197d49c790a 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 	case PTRACE_SETFPREGS:
 	case PTRACE_GETVRREGS:
 	case PTRACE_SETVRREGS:
+	case PTRACE_GETVSRREGS:
+	case PTRACE_SETVSRREGS:
 	case PTRACE_GETREGS64:
 	case PTRACE_SETREGS64:
 	case PPC_PTRACE_GETFPREGS:
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index c680f1bbd38..1f8505c2354 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -792,6 +792,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	if (args.token == RTAS_UNKNOWN_SERVICE)
 		return -EINVAL;
 
+	args.rets = &args.args[nargs];
+	memset(args.rets, 0, args.nret * sizeof(rtas_arg_t));
+
 	/* Need to handle ibm,suspend_me call specially */
 	if (args.token == ibm_suspend_me_token) {
 		rc = rtas_ibm_suspend_me(&args);
@@ -808,8 +811,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	enter_rtas(__pa(&rtas.args));
 	args = rtas.args;
 
-	args.rets = &args.args[nargs];
-
 	/* A -1 return code indicates that the last command couldn't
 	   be completed due to a hardware error. */
 	if (args.rets[0] == -1)
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 09ded5c424a..149cb112cd1 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf,
 }
 
 /* constructor for flash_block_cache */
-void rtas_block_ctor(struct kmem_cache *cache, void *ptr)
+void rtas_block_ctor(void *ptr)
 {
 	memset(ptr, 0, RTAS_BLK_SIZE);
 }
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 61a3f413208..9cc5a52711e 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc)
  * setup_cpu_maps - initialize the following cpu maps:
  *                  cpu_possible_map
  *                  cpu_present_map
- *                  cpu_sibling_map
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
@@ -475,29 +474,6 @@ void __init smp_setup_cpu_maps(void)
 	 */
 	cpu_init_thread_core_maps(nthreads);
 }
-
-/*
- * Being that cpu_sibling_map is now a per_cpu array, then it cannot
- * be initialized until the per_cpu areas have been created.  This
- * function is now called from setup_per_cpu_areas().
- */
-void __init smp_setup_cpu_sibling_map(void)
-{
-#ifdef CONFIG_PPC64
-	int i, cpu, base;
-
-	for_each_possible_cpu(cpu) {
-		DBG("Sibling map for CPU %d:", cpu);
-		base = cpu_first_thread_in_core(cpu);
-		for (i = 0; i < threads_per_core; i++) {
-			cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
-			DBG(" %d", base + i);
-		}
-		DBG("\n");
-	}
-
-#endif /* CONFIG_PPC64 */
-}
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PCSPKR_PLATFORM
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 4efebe88e64..066e65c59b5 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -43,10 +43,6 @@
 
 #define DBG(fmt...)
 
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
 int boot_cpuid;
@@ -302,18 +298,6 @@ void __init setup_arch(char **cmdline_p)
 
 	xmon_setup();
 
-#if defined(CONFIG_KGDB)
-	if (ppc_md.kgdb_map_scc)
-		ppc_md.kgdb_map_scc();
-	set_debug_traps();
-	if (strstr(cmd_line, "gdb")) {
-		if (ppc_md.progress)
-			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
-		printk("kgdb breakpoint activated\n");
-		breakpoint();
-	}
-#endif
-
 	/*
 	 * Set cache line size based on type of cpu as a default.
 	 * Systems with OF can look in the properties on the cpu node(s)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 04d8de9f0fc..8b25f51f03b 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -611,9 +611,6 @@ void __init setup_per_cpu_areas(void)
 		paca[i].data_offset = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
 	}
-
-	/* Now that per_cpu is setup, initialize cpu_sibling_map */
-	smp_setup_cpu_sibling_map();
 }
 #endif
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index ad55488939c..a54405ebd7b 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -9,7 +9,7 @@
  * this archive for more details.
  */
 
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/signal.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
@@ -145,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.dabr)
+	if (current->thread.dabr) {
 		set_dabr(current->thread.dabr);
+#if defined(CONFIG_BOOKE)
+		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+#endif
+	}
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)
@@ -173,11 +177,28 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 		 * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
+
+		/*
+		 * Let tracing know that we've done the handler setup.
+		 */
+		tracehook_signal_handler(signr, &info, &ka, regs,
+					 test_thread_flag(TIF_SINGLESTEP));
 	}
 
 	return ret;
 }
 
+void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal_pending(NULL, regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r5, unsigned long r6, unsigned long r7,
 		unsigned long r8, struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index f5ae9fa222e..5337ca7bb64 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -41,6 +41,7 @@
 #include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
+#include <asm/cputhreads.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
 #include <asm/mpic.h>
@@ -62,10 +63,12 @@ struct thread_info *secondary_ti;
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
 
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
@@ -228,6 +231,8 @@ void __devinit smp_prepare_boot_cpu(void)
 	BUG_ON(smp_processor_id() != boot_cpuid);
 
 	cpu_set(boot_cpuid, cpu_online_map);
+	cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
+	cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
 #endif
@@ -375,11 +380,60 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	return 0;
 }
 
+/* Return the value of the reg property corresponding to the given
+ * logical cpu.
+ */
+int cpu_to_core_id(int cpu)
+{
+	struct device_node *np;
+	const int *reg;
+	int id = -1;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		goto out;
+
+	reg = of_get_property(np, "reg", NULL);
+	if (!reg)
+		goto out;
+
+	id = *reg;
+out:
+	of_node_put(np);
+	return id;
+}
+
+/* Must be called when no change can occur to cpu_present_map,
+ * i.e. during cpu online or offline.
+ */
+static struct device_node *cpu_to_l2cache(int cpu)
+{
+	struct device_node *np;
+	const phandle *php;
+	phandle ph;
+
+	if (!cpu_present(cpu))
+		return NULL;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (np == NULL)
+		return NULL;
+
+	php = of_get_property(np, "l2-cache", NULL);
+	if (php == NULL)
+		return NULL;
+	ph = *php;
+	of_node_put(np);
+
+	return of_find_node_by_phandle(ph);
+}
 
 /* Activate a secondary processor. */
 int __devinit start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
+	struct device_node *l2_cache;
+	int i, base;
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
@@ -400,6 +454,33 @@ int __devinit start_secondary(void *unused)
 
 	ipi_call_lock();
 	cpu_set(cpu, cpu_online_map);
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		if (cpu_is_offline(base + i))
+			continue;
+		cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+
+		/* cpu_core_map should be a superset of
+		 * cpu_sibling_map even if we don't have cache
+		 * information, so update the former here, too.
+		 */
+		cpu_set(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+	}
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_online_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_set(cpu, per_cpu(cpu_core_map, i));
+			cpu_set(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
 	ipi_call_unlock();
 
 	local_irq_enable();
@@ -437,10 +518,42 @@ void __init smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_HOTPLUG_CPU
 int __cpu_disable(void)
 {
-	if (smp_ops->cpu_disable)
-		return smp_ops->cpu_disable();
+	struct device_node *l2_cache;
+	int cpu = smp_processor_id();
+	int base, i;
+	int err;
 
-	return -ENOSYS;
+	if (!smp_ops->cpu_disable)
+		return -ENOSYS;
+
+	err = smp_ops->cpu_disable();
+	if (err)
+		return err;
+
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
+		cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+	}
+
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_present_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_clear(cpu, per_cpu(cpu_core_map, i));
+			cpu_clear(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
+
+
+	return 0;
 }
 
 void __cpu_die(unsigned int cpu)
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index 071bee3ec74..b0dbb1daa4d 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 
@@ -59,6 +58,6 @@ EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
-	save_context_stack(trace, tsk->thread.regs->gpr[1], tsk, 0);
+	save_context_stack(trace, tsk->thread.ksp, tsk, 0);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c
index 8cee5710754..6fc6328dc62 100644
--- a/arch/powerpc/kernel/suspend.c
+++ b/arch/powerpc/kernel/suspend.c
@@ -7,6 +7,7 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
+#include <linux/mm.h>
 #include <asm/page.h>
 
 /* References to section boundaries */
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 709f8cb8bfc..d98634c7606 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -52,63 +52,6 @@
 #include <asm/ppc-pci.h>
 #include <asm/syscalls.h>
 
-struct old_linux_dirent32 {
-	u32		d_ino;
-	u32		d_offset;
-	unsigned short	d_namlen;
-	char		d_name[1];
-};
-
-struct readdir_callback32 {
-	struct old_linux_dirent32 __user * dirent;
-	int count;
-};
-
-static int fillonedir(void * __buf, const char * name, int namlen,
-		                  off_t offset, u64 ino, unsigned int d_type)
-{
-	struct readdir_callback32 * buf = (struct readdir_callback32 *) __buf;
-	struct old_linux_dirent32 __user * dirent;
-	ino_t d_ino;
-
-	if (buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->count++;
-	dirent = buf->dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(offset, &dirent->d_offset);
-	put_user(namlen, &dirent->d_namlen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	return 0;
-}
-
-asmlinkage int old32_readdir(unsigned int fd, struct old_linux_dirent32 __user *dirent, unsigned int count)
-{
-	int error = -EBADF;
-	struct file * file;
-	struct readdir_callback32 buf;
-
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.count = 0;
-	buf.dirent = dirent;
-
-	error = vfs_readdir(file, (filldir_t)fillonedir, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.count;
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
 
 asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp,
 		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index c8127f832df..56d172d16e5 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -22,13 +22,17 @@
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+static DEFINE_PER_CPU(struct kobject *, cache_toplevel);
+
 /* SMT stuff */
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
 /* Time in microseconds we delay before sleeping in the idle loop */
 DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
 
-static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
+static ssize_t store_smt_snooze_delay(struct sys_device *dev,
+				      struct sysdev_attribute *attr,
+				      const char *buf,
 				      size_t count)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
@@ -44,7 +48,9 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf)
+static ssize_t show_smt_snooze_delay(struct sys_device *dev,
+				     struct sysdev_attribute *attr,
+				     char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
@@ -152,14 +158,17 @@ static unsigned long write_##NAME(unsigned long val) \
 	mtspr(ADDRESS, val); \
 	return 0; \
 } \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+			struct sysdev_attribute *attr, \
+			char *buf) \
 { \
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
 	unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \
 	return sprintf(buf, "%lx\n", val); \
 } \
 static ssize_t __used \
-	store_##NAME(struct sys_device *dev, const char *buf, size_t count) \
+	store_##NAME(struct sys_device *dev, struct sysdev_attribute *attr, \
+			const char *buf, size_t count) \
 { \
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
 	unsigned long val; \
@@ -290,8 +299,289 @@ static struct sysdev_attribute pa6t_attrs[] = {
 #endif /* CONFIG_DEBUG_KERNEL */
 };
 
+struct cache_desc {
+	struct kobject kobj;
+	struct cache_desc *next;
+	const char *type;	/* Instruction, Data, or Unified */
+	u32 size;		/* total cache size in KB */
+	u32 line_size;		/* in bytes */
+	u32 nr_sets;		/* number of sets */
+	u32 level;		/* e.g. 1, 2, 3... */
+	u32 associativity;	/* e.g. 8-way... 0 is fully associative */
+};
+
+DEFINE_PER_CPU(struct cache_desc *, cache_desc);
+
+static struct cache_desc *kobj_to_cache_desc(struct kobject *k)
+{
+	return container_of(k, struct cache_desc, kobj);
+}
+
+static void cache_desc_release(struct kobject *k)
+{
+	struct cache_desc *desc = kobj_to_cache_desc(k);
+
+	pr_debug("%s: releasing %s\n", __func__, kobject_name(k));
+
+	if (desc->next)
+		kobject_put(&desc->next->kobj);
+
+	kfree(kobj_to_cache_desc(k));
+}
+
+static ssize_t cache_desc_show(struct kobject *k, struct attribute *attr, char *buf)
+{
+	struct kobj_attribute *kobj_attr;
+
+	kobj_attr = container_of(attr, struct kobj_attribute, attr);
+
+	return kobj_attr->show(k, kobj_attr, buf);
+}
+
+static struct sysfs_ops cache_desc_sysfs_ops = {
+	.show = cache_desc_show,
+};
+
+static struct kobj_type cache_desc_type = {
+	.release = cache_desc_release,
+	.sysfs_ops = &cache_desc_sysfs_ops,
+};
+
+static ssize_t cache_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%uK\n", cache->size);
+}
+
+static struct kobj_attribute cache_size_attr =
+	__ATTR(size, 0444, cache_size_show, NULL);
+
+static ssize_t cache_line_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->line_size);
+}
+
+static struct kobj_attribute cache_line_size_attr =
+	__ATTR(coherency_line_size, 0444, cache_line_size_show, NULL);
+
+static ssize_t cache_nr_sets_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->nr_sets);
+}
+
+static struct kobj_attribute cache_nr_sets_attr =
+	__ATTR(number_of_sets, 0444, cache_nr_sets_show, NULL);
+
+static ssize_t cache_type_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%s\n", cache->type);
+}
+
+static struct kobj_attribute cache_type_attr =
+	__ATTR(type, 0444, cache_type_show, NULL);
+
+static ssize_t cache_level_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->level);
+}
+
+static struct kobj_attribute cache_level_attr =
+	__ATTR(level, 0444, cache_level_show, NULL);
+
+static ssize_t cache_assoc_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->associativity);
+}
+
+static struct kobj_attribute cache_assoc_attr =
+	__ATTR(ways_of_associativity, 0444, cache_assoc_show, NULL);
+
+struct cache_desc_info {
+	const char *type;
+	const char *size_prop;
+	const char *line_size_prop;
+	const char *nr_sets_prop;
+};
+
+/* PowerPC Processor binding says the [di]-cache-* must be equal on
+ * unified caches, so just use d-cache properties. */
+static struct cache_desc_info ucache_info = {
+	.type = "Unified",
+	.size_prop = "d-cache-size",
+	.line_size_prop = "d-cache-line-size",
+	.nr_sets_prop = "d-cache-sets",
+};
 
-static void register_cpu_online(unsigned int cpu)
+static struct cache_desc_info dcache_info = {
+	.type = "Data",
+	.size_prop = "d-cache-size",
+	.line_size_prop = "d-cache-line-size",
+	.nr_sets_prop = "d-cache-sets",
+};
+
+static struct cache_desc_info icache_info = {
+	.type = "Instruction",
+	.size_prop = "i-cache-size",
+	.line_size_prop = "i-cache-line-size",
+	.nr_sets_prop = "i-cache-sets",
+};
+
+static struct cache_desc * __cpuinit create_cache_desc(struct device_node *np, struct kobject *parent, int index, int level, struct cache_desc_info *info)
+{
+	const u32 *cache_line_size;
+	struct cache_desc *new;
+	const u32 *cache_size;
+	const u32 *nr_sets;
+	int rc;
+
+	new = kzalloc(sizeof(*new), GFP_KERNEL);
+	if (!new)
+		return NULL;
+
+	rc = kobject_init_and_add(&new->kobj, &cache_desc_type, parent,
+				  "index%d", index);
+	if (rc)
+		goto err;
+
+	/* type */
+	new->type = info->type;
+	rc = sysfs_create_file(&new->kobj, &cache_type_attr.attr);
+	WARN_ON(rc);
+
+	/* level */
+	new->level = level;
+	rc = sysfs_create_file(&new->kobj, &cache_level_attr.attr);
+	WARN_ON(rc);
+
+	/* size */
+	cache_size = of_get_property(np, info->size_prop, NULL);
+	if (cache_size) {
+		new->size = *cache_size / 1024;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_size_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* coherency_line_size */
+	cache_line_size = of_get_property(np, info->line_size_prop, NULL);
+	if (cache_line_size) {
+		new->line_size = *cache_line_size;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_line_size_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* number_of_sets */
+	nr_sets = of_get_property(np, info->nr_sets_prop, NULL);
+	if (nr_sets) {
+		new->nr_sets = *nr_sets;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_nr_sets_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* ways_of_associativity */
+	if (new->nr_sets == 1) {
+		/* fully associative */
+		new->associativity = 0;
+		goto create_assoc;
+	}
+
+	if (new->nr_sets && new->size && new->line_size) {
+		/* If we have values for all of these we can derive
+		 * the associativity. */
+		new->associativity =
+			((new->size * 1024) / new->nr_sets) / new->line_size;
+create_assoc:
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_assoc_attr.attr);
+		WARN_ON(rc);
+	}
+
+	return new;
+err:
+	kfree(new);
+	return NULL;
+}
+
+static bool cache_is_unified(struct device_node *np)
+{
+	return of_get_property(np, "cache-unified", NULL);
+}
+
+static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level)
+{
+	const phandle *next_cache_phandle;
+	struct device_node *next_cache;
+	struct cache_desc *new, **end;
+
+	pr_debug("%s(node = %s, index = %d)\n", __func__, np->full_name, index);
+
+	if (cache_is_unified(np)) {
+		new = create_cache_desc(np, parent, index, level,
+					&ucache_info);
+	} else {
+		new = create_cache_desc(np, parent, index, level,
+					&dcache_info);
+		if (new) {
+			index++;
+			new->next = create_cache_desc(np, parent, index, level,
+						      &icache_info);
+		}
+	}
+	if (!new)
+		return NULL;
+
+	end = &new->next;
+	while (*end)
+		end = &(*end)->next;
+
+	next_cache_phandle = of_get_property(np, "l2-cache", NULL);
+	if (!next_cache_phandle)
+		goto out;
+
+	next_cache = of_find_node_by_phandle(*next_cache_phandle);
+	if (!next_cache)
+		goto out;
+
+	*end = create_cache_index_info(next_cache, parent, ++index, ++level);
+
+	of_node_put(next_cache);
+out:
+	return new;
+}
+
+static void __cpuinit create_cache_info(struct sys_device *sysdev)
+{
+	struct kobject *cache_toplevel;
+	struct device_node *np = NULL;
+	int cpu = sysdev->id;
+
+	cache_toplevel = kobject_create_and_add("cache", &sysdev->kobj);
+	if (!cache_toplevel)
+		return;
+	per_cpu(cache_toplevel, cpu) = cache_toplevel;
+	np = of_get_cpu_node(cpu, NULL);
+	if (np != NULL) {
+		per_cpu(cache_desc, cpu) =
+			create_cache_index_info(np, cache_toplevel, 0, 1);
+		of_node_put(np);
+	}
+	return;
+}
+
+static void __cpuinit register_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
 	struct sys_device *s = &c->sysdev;
@@ -339,9 +629,33 @@ static void register_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_create_file(s, &attr_dscr);
+
+	create_cache_info(s);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+static void remove_cache_info(struct sys_device *sysdev)
+{
+	struct kobject *cache_toplevel;
+	struct cache_desc *cache_desc;
+	int cpu = sysdev->id;
+
+	cache_desc = per_cpu(cache_desc, cpu);
+	if (cache_desc != NULL) {
+		sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr);
+
+		kobject_put(&cache_desc->kobj);
+	}
+	cache_toplevel = per_cpu(cache_toplevel, cpu);
+	if (cache_toplevel != NULL)
+		kobject_put(cache_toplevel);
+}
+
 static void unregister_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
@@ -392,6 +706,8 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_remove_file(s, &attr_dscr);
+
+	remove_cache_info(s);
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -522,7 +838,8 @@ static void register_nodes(void)
 #endif
 
 /* Only valid if CPU is present. */
-static ssize_t show_physical_id(struct sys_device *dev, char *buf)
+static ssize_t show_physical_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 878fbddb6ae..81ccb8dd1a5 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1067,6 +1067,22 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 		}
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+		regs->msr &= ~MSR_DE;
+
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
+								DBCR0_IDM);
+		} else {
+			/* Disable DAC interupts */
+			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
+						DBSR_DAC1W | DBCR0_IDM));
+
+			/* Clear the DAC event */
+			mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
+		}
+		/* Setup and send the trap to the handler */
+		do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
 	}
 }
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index f177c60ea76..65639a43e64 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -788,9 +788,7 @@ static int __init vdso_init(void)
 
 	return 0;
 }
-#ifdef CONFIG_PPC_MERGE
 arch_initcall(vdso_init);
-#endif
 
 int in_gate_area_no_task(unsigned long addr)
 {
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index b77f8af7ddd..2750fbab197 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1,11 +1,12 @@
 /*
  * IBM PowerPC Virtual I/O Infrastructure Support.
  *
- *    Copyright (c) 2003-2005 IBM Corp.
+ *    Copyright (c) 2003,2008 IBM Corp.
  *     Dave Engebretsen engebret@us.ibm.com
  *     Santiago Leon santil@us.ibm.com
  *     Hollis Blanchard <hollisb@us.ibm.com>
  *     Stephen Rothwell
+ *     Robert Jennings <rcjenn@us.ibm.com>
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -46,6 +47,996 @@ static struct vio_dev vio_bus_device  = { /* fake "parent" device */
 	.dev.bus = &vio_bus_type,
 };
 
+#ifdef CONFIG_PPC_SMLPAR
+/**
+ * vio_cmo_pool - A pool of IO memory for CMO use
+ *
+ * @size: The size of the pool in bytes
+ * @free: The amount of free memory in the pool
+ */
+struct vio_cmo_pool {
+	size_t size;
+	size_t free;
+};
+
+/* How many ms to delay queued balance work */
+#define VIO_CMO_BALANCE_DELAY 100
+
+/* Portion out IO memory to CMO devices by this chunk size */
+#define VIO_CMO_BALANCE_CHUNK 131072
+
+/**
+ * vio_cmo_dev_entry - A device that is CMO-enabled and requires entitlement
+ *
+ * @vio_dev: struct vio_dev pointer
+ * @list: pointer to other devices on bus that are being tracked
+ */
+struct vio_cmo_dev_entry {
+	struct vio_dev *viodev;
+	struct list_head list;
+};
+
+/**
+ * vio_cmo - VIO bus accounting structure for CMO entitlement
+ *
+ * @lock: spinlock for entire structure
+ * @balance_q: work queue for balancing system entitlement
+ * @device_list: list of CMO-enabled devices requiring entitlement
+ * @entitled: total system entitlement in bytes
+ * @reserve: pool of memory from which devices reserve entitlement, incl. spare
+ * @excess: pool of excess entitlement not needed for device reserves or spare
+ * @spare: IO memory for device hotplug functionality
+ * @min: minimum necessary for system operation
+ * @desired: desired memory for system operation
+ * @curr: bytes currently allocated
+ * @high: high water mark for IO data usage
+ */
+struct vio_cmo {
+	spinlock_t lock;
+	struct delayed_work balance_q;
+	struct list_head device_list;
+	size_t entitled;
+	struct vio_cmo_pool reserve;
+	struct vio_cmo_pool excess;
+	size_t spare;
+	size_t min;
+	size_t desired;
+	size_t curr;
+	size_t high;
+} vio_cmo;
+
+/**
+ * vio_cmo_OF_devices - Count the number of OF devices that have DMA windows
+ */
+static int vio_cmo_num_OF_devs(void)
+{
+	struct device_node *node_vroot;
+	int count = 0;
+
+	/*
+	 * Count the number of vdevice entries with an
+	 * ibm,my-dma-window OF property
+	 */
+	node_vroot = of_find_node_by_name(NULL, "vdevice");
+	if (node_vroot) {
+		struct device_node *of_node;
+		struct property *prop;
+
+		for_each_child_of_node(node_vroot, of_node) {
+			prop = of_find_property(of_node, "ibm,my-dma-window",
+			                       NULL);
+			if (prop)
+				count++;
+		}
+	}
+	of_node_put(node_vroot);
+	return count;
+}
+
+/**
+ * vio_cmo_alloc - allocate IO memory for CMO-enable devices
+ *
+ * @viodev: VIO device requesting IO memory
+ * @size: size of allocation requested
+ *
+ * Allocations come from memory reserved for the devices and any excess
+ * IO memory available to all devices.  The spare pool used to service
+ * hotplug must be equal to %VIO_CMO_MIN_ENT for the excess pool to be
+ * made available.
+ *
+ * Return codes:
+ *  0 for successful allocation and -ENOMEM for a failure
+ */
+static inline int vio_cmo_alloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t reserve_free = 0;
+	size_t excess_free = 0;
+	int ret = -ENOMEM;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Determine the amount of free entitlement available in reserve */
+	if (viodev->cmo.entitled > viodev->cmo.allocated)
+		reserve_free = viodev->cmo.entitled - viodev->cmo.allocated;
+
+	/* If spare is not fulfilled, the excess pool can not be used. */
+	if (vio_cmo.spare >= VIO_CMO_MIN_ENT)
+		excess_free = vio_cmo.excess.free;
+
+	/* The request can be satisfied */
+	if ((reserve_free + excess_free) >= size) {
+		vio_cmo.curr += size;
+		if (vio_cmo.curr > vio_cmo.high)
+			vio_cmo.high = vio_cmo.curr;
+		viodev->cmo.allocated += size;
+		size -= min(reserve_free, size);
+		vio_cmo.excess.free -= size;
+		ret = 0;
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return ret;
+}
+
+/**
+ * vio_cmo_dealloc - deallocate IO memory from CMO-enable devices
+ * @viodev: VIO device freeing IO memory
+ * @size: size of deallocation
+ *
+ * IO memory is freed by the device back to the correct memory pools.
+ * The spare pool is replenished first from either memory pool, then
+ * the reserve pool is used to reduce device entitlement, the excess
+ * pool is used to increase the reserve pool toward the desired entitlement
+ * target, and then the remaining memory is returned to the pools.
+ *
+ */
+static inline void vio_cmo_dealloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t spare_needed = 0;
+	size_t excess_freed = 0;
+	size_t reserve_freed = size;
+	size_t tmp;
+	int balance = 0;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.curr -= size;
+
+	/* Amount of memory freed from the excess pool */
+	if (viodev->cmo.allocated > viodev->cmo.entitled) {
+		excess_freed = min(reserve_freed, (viodev->cmo.allocated -
+		                                   viodev->cmo.entitled));
+		reserve_freed -= excess_freed;
+	}
+
+	/* Remove allocation from device */
+	viodev->cmo.allocated -= (reserve_freed + excess_freed);
+
+	/* Spare is a subset of the reserve pool, replenish it first. */
+	spare_needed = VIO_CMO_MIN_ENT - vio_cmo.spare;
+
+	/*
+	 * Replenish the spare in the reserve pool from the excess pool.
+	 * This moves entitlement into the reserve pool.
+	 */
+	if (spare_needed && excess_freed) {
+		tmp = min(excess_freed, spare_needed);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		vio_cmo.spare += tmp;
+		excess_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Replenish the spare in the reserve pool from the reserve pool.
+	 * This removes entitlement from the device down to VIO_CMO_MIN_ENT,
+	 * if needed, and gives it to the spare pool. The amount of used
+	 * memory in this pool does not change.
+	 */
+	if (spare_needed && reserve_freed) {
+		tmp = min(spare_needed, min(reserve_freed,
+		                            (viodev->cmo.entitled -
+		                             VIO_CMO_MIN_ENT)));
+
+		vio_cmo.spare += tmp;
+		viodev->cmo.entitled -= tmp;
+		reserve_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Increase the reserve pool until the desired allocation is met.
+	 * Move an allocation freed from the excess pool into the reserve
+	 * pool and schedule a balance operation.
+	 */
+	if (excess_freed && (vio_cmo.desired > vio_cmo.reserve.size)) {
+		tmp = min(excess_freed, (vio_cmo.desired - vio_cmo.reserve.size));
+
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		excess_freed -= tmp;
+		balance = 1;
+	}
+
+	/* Return memory from the excess pool to that pool */
+	if (excess_freed)
+		vio_cmo.excess.free += excess_freed;
+
+	if (balance)
+		schedule_delayed_work(&vio_cmo.balance_q, VIO_CMO_BALANCE_DELAY);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_entitlement_update - Manage system entitlement changes
+ *
+ * @new_entitlement: new system entitlement to attempt to accommodate
+ *
+ * Increases in entitlement will be used to fulfill the spare entitlement
+ * and the rest is given to the excess pool.  Decreases, if they are
+ * possible, come from the excess pool and from unused device entitlement
+ *
+ * Returns: 0 on success, -ENOMEM when change can not be made
+ */
+int vio_cmo_entitlement_update(size_t new_entitlement)
+{
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail, delta, tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Entitlement increases */
+	if (new_entitlement > vio_cmo.entitled) {
+		delta = new_entitlement - vio_cmo.entitled;
+
+		/* Fulfill spare allocation */
+		if (vio_cmo.spare < VIO_CMO_MIN_ENT) {
+			tmp = min(delta, (VIO_CMO_MIN_ENT - vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			vio_cmo.reserve.size += tmp;
+			delta -= tmp;
+		}
+
+		/* Remaining new allocation goes to the excess pool */
+		vio_cmo.entitled += delta;
+		vio_cmo.excess.size += delta;
+		vio_cmo.excess.free += delta;
+
+		goto out;
+	}
+
+	/* Entitlement decreases */
+	delta = vio_cmo.entitled - new_entitlement;
+	avail = vio_cmo.excess.free;
+
+	/*
+	 * Need to check how much unused entitlement each device can
+	 * sacrifice to fulfill entitlement change.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		if (avail >= delta)
+			break;
+
+		viodev = dev_ent->viodev;
+		if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+		    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				avail += viodev->cmo.entitled -
+				         max_t(size_t, viodev->cmo.allocated,
+				               VIO_CMO_MIN_ENT);
+	}
+
+	if (delta <= avail) {
+		vio_cmo.entitled -= delta;
+
+		/* Take entitlement from the excess pool first */
+		tmp = min(vio_cmo.excess.free, delta);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.excess.free -= tmp;
+		delta -= tmp;
+
+		/*
+		 * Remove all but VIO_CMO_MIN_ENT bytes from devices
+		 * until entitlement change is served
+		 */
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			if (!delta)
+				break;
+
+			viodev = dev_ent->viodev;
+			tmp = 0;
+			if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+			    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				tmp = viodev->cmo.entitled -
+				      max_t(size_t, viodev->cmo.allocated,
+				            VIO_CMO_MIN_ENT);
+			viodev->cmo.entitled -= min(tmp, delta);
+			delta -= min(tmp, delta);
+		}
+	} else {
+		spin_unlock_irqrestore(&vio_cmo.lock, flags);
+		return -ENOMEM;
+	}
+
+out:
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_balance - Balance entitlement among devices
+ *
+ * @work: work queue structure for this operation
+ *
+ * Any system entitlement above the minimum needed for devices, or
+ * already allocated to devices, can be distributed to the devices.
+ * The list of devices is iterated through to recalculate the desired
+ * entitlement level and to determine how much entitlement above the
+ * minimum entitlement is allocated to devices.
+ *
+ * Small chunks of the available entitlement are given to devices until
+ * their requirements are fulfilled or there is no entitlement left to give.
+ * Upon completion sizes of the reserve and excess pools are calculated.
+ *
+ * The system minimum entitlement level is also recalculated here.
+ * Entitlement will be reserved for devices even after vio_bus_remove to
+ * accommodate reloading the driver.  The OF tree is walked to count the
+ * number of devices present and this will remove entitlement for devices
+ * that have actually left the system after having vio_bus_remove called.
+ */
+static void vio_cmo_balance(struct work_struct *work)
+{
+	struct vio_cmo *cmo;
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail = 0, level, chunk, need;
+	int devcount = 0, fulfilled;
+
+	cmo = container_of(work, struct vio_cmo, balance_q.work);
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Calculate minimum entitlement and fulfill spare */
+	cmo->min = vio_cmo_num_OF_devs() * VIO_CMO_MIN_ENT;
+	BUG_ON(cmo->min > cmo->entitled);
+	cmo->spare = min_t(size_t, VIO_CMO_MIN_ENT, (cmo->entitled - cmo->min));
+	cmo->min += cmo->spare;
+	cmo->desired = cmo->min;
+
+	/*
+	 * Determine how much entitlement is available and reset device
+	 * entitlements
+	 */
+	avail = cmo->entitled - cmo->spare;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		devcount++;
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		cmo->desired += (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+		avail -= max_t(size_t, viodev->cmo.allocated, VIO_CMO_MIN_ENT);
+	}
+
+	/*
+	 * Having provided each device with the minimum entitlement, loop
+	 * over the devices portioning out the remaining entitlement
+	 * until there is nothing left.
+	 */
+	level = VIO_CMO_MIN_ENT;
+	while (avail) {
+		fulfilled = 0;
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			viodev = dev_ent->viodev;
+
+			if (viodev->cmo.desired <= level) {
+				fulfilled++;
+				continue;
+			}
+
+			/*
+			 * Give the device up to VIO_CMO_BALANCE_CHUNK
+			 * bytes of entitlement, but do not exceed the
+			 * desired level of entitlement for the device.
+			 */
+			chunk = min_t(size_t, avail, VIO_CMO_BALANCE_CHUNK);
+			chunk = min(chunk, (viodev->cmo.desired -
+			                    viodev->cmo.entitled));
+			viodev->cmo.entitled += chunk;
+
+			/*
+			 * If the memory for this entitlement increase was
+			 * already allocated to the device it does not come
+			 * from the available pool being portioned out.
+			 */
+			need = max(viodev->cmo.allocated, viodev->cmo.entitled)-
+			       max(viodev->cmo.allocated, level);
+			avail -= need;
+
+		}
+		if (fulfilled == devcount)
+			break;
+		level += VIO_CMO_BALANCE_CHUNK;
+	}
+
+	/* Calculate new reserve and excess pool sizes */
+	cmo->reserve.size = cmo->min;
+	cmo->excess.free = 0;
+	cmo->excess.size = 0;
+	need = 0;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		/* Calculated reserve size above the minimum entitlement */
+		if (viodev->cmo.entitled)
+			cmo->reserve.size += (viodev->cmo.entitled -
+			                      VIO_CMO_MIN_ENT);
+		/* Calculated used excess entitlement */
+		if (viodev->cmo.allocated > viodev->cmo.entitled)
+			need += viodev->cmo.allocated - viodev->cmo.entitled;
+	}
+	cmo->excess.size = cmo->entitled - cmo->reserve.size;
+	cmo->excess.free = cmo->excess.size - need;
+
+	cancel_delayed_work(container_of(work, struct delayed_work, work));
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
+                                          dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	void *ret;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return NULL;
+	}
+
+	ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag);
+	if (unlikely(ret == NULL)) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
+                                        void *vaddr, dma_addr_t dma_handle)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
+                                           size_t size,
+                                           enum dma_data_direction direction,
+                                           struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	dma_addr_t ret = DMA_ERROR_CODE;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return ret;
+	}
+
+	ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
+	if (unlikely(dma_mapping_error(dev, ret))) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_single(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
+                                int nelems, enum dma_data_direction direction,
+                                struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	int ret, count = 0;
+	size_t alloc_size = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE);
+
+	if (vio_cmo_alloc(viodev, alloc_size)) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return 0;
+	}
+
+	ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
+
+	if (unlikely(!ret)) {
+		vio_cmo_dealloc(viodev, alloc_size);
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	for (sgl = sglist, count = 0; count < ret; count++, sgl++)
+		alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+	if (alloc_size)
+		vio_cmo_dealloc(viodev, alloc_size);
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_sg(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	size_t alloc_size = 0;
+	int count = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+
+	dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
+
+	vio_cmo_dealloc(viodev, alloc_size);
+}
+
+struct dma_mapping_ops vio_dma_mapping_ops = {
+	.alloc_coherent = vio_dma_iommu_alloc_coherent,
+	.free_coherent  = vio_dma_iommu_free_coherent,
+	.map_single     = vio_dma_iommu_map_single,
+	.unmap_single   = vio_dma_iommu_unmap_single,
+	.map_sg         = vio_dma_iommu_map_sg,
+	.unmap_sg       = vio_dma_iommu_unmap_sg,
+};
+
+/**
+ * vio_cmo_set_dev_desired - Set desired entitlement for a device
+ *
+ * @viodev: struct vio_dev for device to alter
+ * @new_desired: new desired entitlement level in bytes
+ *
+ * For use by devices to request a change to their entitlement at runtime or
+ * through sysfs.  The desired entitlement level is changed and a balancing
+ * of system resources is scheduled to run in the future.
+ */
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
+{
+	unsigned long flags;
+	struct vio_cmo_dev_entry *dev_ent;
+	int found = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (desired < VIO_CMO_MIN_ENT)
+		desired = VIO_CMO_MIN_ENT;
+
+	/*
+	 * Changes will not be made for devices not in the device list.
+	 * If it is not in the device list, then no driver is loaded
+	 * for the device and it can not receive entitlement.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			found = 1;
+			break;
+		}
+	if (!found)
+		return;
+
+	/* Increase/decrease in desired device entitlement */
+	if (desired >= viodev->cmo.desired) {
+		/* Just bump the bus and device values prior to a balance*/
+		vio_cmo.desired += desired - viodev->cmo.desired;
+		viodev->cmo.desired = desired;
+	} else {
+		/* Decrease bus and device values for desired entitlement */
+		vio_cmo.desired -= viodev->cmo.desired - desired;
+		viodev->cmo.desired = desired;
+		/*
+		 * If less entitlement is desired than current entitlement, move
+		 * any reserve memory in the change region to the excess pool.
+		 */
+		if (viodev->cmo.entitled > desired) {
+			vio_cmo.reserve.size -= viodev->cmo.entitled - desired;
+			vio_cmo.excess.size += viodev->cmo.entitled - desired;
+			/*
+			 * If entitlement moving from the reserve pool to the
+			 * excess pool is currently unused, add to the excess
+			 * free counter.
+			 */
+			if (viodev->cmo.allocated < viodev->cmo.entitled)
+				vio_cmo.excess.free += viodev->cmo.entitled -
+				                       max(viodev->cmo.allocated, desired);
+			viodev->cmo.entitled = desired;
+		}
+	}
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_bus_probe - Handle CMO specific bus probe activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Determine the devices IO memory entitlement needs, attempting
+ * to satisfy the system minimum entitlement at first and scheduling
+ * a balance operation to take care of the rest at a later time.
+ *
+ * Returns: 0 on success, -EINVAL when device doesn't support CMO, and
+ *          -ENOMEM when entitlement is not available for device or
+ *          device entry.
+ *
+ */
+static int vio_cmo_bus_probe(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	struct device *dev = &viodev->dev;
+	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	unsigned long flags;
+	size_t size;
+
+	/*
+	 * Check to see that device has a DMA window and configure
+	 * entitlement for the device.
+	 */
+	if (of_get_property(viodev->dev.archdata.of_node,
+	                    "ibm,my-dma-window", NULL)) {
+		/* Check that the driver is CMO enabled and get desired DMA */
+		if (!viodrv->get_desired_dma) {
+			dev_err(dev, "%s: device driver does not support CMO\n",
+			        __func__);
+			return -EINVAL;
+		}
+
+		viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev));
+		if (viodev->cmo.desired < VIO_CMO_MIN_ENT)
+			viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		size = VIO_CMO_MIN_ENT;
+
+		dev_ent = kmalloc(sizeof(struct vio_cmo_dev_entry),
+		                  GFP_KERNEL);
+		if (!dev_ent)
+			return -ENOMEM;
+
+		dev_ent->viodev = viodev;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+		list_add(&dev_ent->list, &vio_cmo.device_list);
+	} else {
+		viodev->cmo.desired = 0;
+		size = 0;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+	}
+
+	/*
+	 * If the needs for vio_cmo.min have not changed since they
+	 * were last set, the number of devices in the OF tree has
+	 * been constant and the IO memory for this is already in
+	 * the reserve pool.
+	 */
+	if (vio_cmo.min == ((vio_cmo_num_OF_devs() + 1) *
+	                    VIO_CMO_MIN_ENT)) {
+		/* Updated desired entitlement if device requires it */
+		if (size)
+			vio_cmo.desired += (viodev->cmo.desired -
+		                        VIO_CMO_MIN_ENT);
+	} else {
+		size_t tmp;
+
+		tmp = vio_cmo.spare + vio_cmo.excess.free;
+		if (tmp < size) {
+			dev_err(dev, "%s: insufficient free "
+			        "entitlement to add device. "
+			        "Need %lu, have %lu\n", __func__,
+				size, (vio_cmo.spare + tmp));
+			spin_unlock_irqrestore(&vio_cmo.lock, flags);
+			return -ENOMEM;
+		}
+
+		/* Use excess pool first to fulfill request */
+		tmp = min(size, vio_cmo.excess.free);
+		vio_cmo.excess.free -= tmp;
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+
+		/* Use spare if excess pool was insufficient */
+		vio_cmo.spare -= size - tmp;
+
+		/* Update bus accounting */
+		vio_cmo.min += size;
+		vio_cmo.desired += viodev->cmo.desired;
+	}
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_bus_remove - Handle CMO specific bus removal activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Remove the device from the cmo device list.  The minimum entitlement
+ * will be reserved for the device as long as it is in the system.  The
+ * rest of the entitlement the device had been allocated will be returned
+ * to the system.
+ */
+static void vio_cmo_bus_remove(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (viodev->cmo.allocated) {
+		dev_err(&viodev->dev, "%s: device had %lu bytes of IO "
+		        "allocated after remove operation.\n",
+		        __func__, viodev->cmo.allocated);
+		BUG();
+	}
+
+	/*
+	 * Remove the device from the device list being maintained for
+	 * CMO enabled devices.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			list_del(&dev_ent->list);
+			kfree(dev_ent);
+			break;
+		}
+
+	/*
+	 * Devices may not require any entitlement and they do not need
+	 * to be processed.  Otherwise, return the device's entitlement
+	 * back to the pools.
+	 */
+	if (viodev->cmo.entitled) {
+		/*
+		 * This device has not yet left the OF tree, it's
+		 * minimum entitlement remains in vio_cmo.min and
+		 * vio_cmo.desired
+		 */
+		vio_cmo.desired -= (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+
+		/*
+		 * Save min allocation for device in reserve as long
+		 * as it exists in OF tree as determined by later
+		 * balance operation
+		 */
+		viodev->cmo.entitled -= VIO_CMO_MIN_ENT;
+
+		/* Replenish spare from freed reserve pool */
+		if (viodev->cmo.entitled && (vio_cmo.spare < VIO_CMO_MIN_ENT)) {
+			tmp = min(viodev->cmo.entitled, (VIO_CMO_MIN_ENT -
+			                                 vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			viodev->cmo.entitled -= tmp;
+		}
+
+		/* Remaining reserve goes to excess pool */
+		vio_cmo.excess.size += viodev->cmo.entitled;
+		vio_cmo.excess.free += viodev->cmo.entitled;
+		vio_cmo.reserve.size -= viodev->cmo.entitled;
+
+		/*
+		 * Until the device is removed it will keep a
+		 * minimum entitlement; this will guarantee that
+		 * a module unload/load will result in a success.
+		 */
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		atomic_set(&viodev->cmo.allocs_failed, 0);
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev)
+{
+	vio_dma_mapping_ops.dma_supported = dma_iommu_ops.dma_supported;
+	viodev->dev.archdata.dma_ops = &vio_dma_mapping_ops;
+}
+
+/**
+ * vio_cmo_bus_init - CMO entitlement initialization at bus init time
+ *
+ * Set up the reserve and excess entitlement pools based on available
+ * system entitlement and the number of devices in the OF tree that
+ * require entitlement in the reserve pool.
+ */
+static void vio_cmo_bus_init(void)
+{
+	struct hvcall_mpp_data mpp_data;
+	int err;
+
+	memset(&vio_cmo, 0, sizeof(struct vio_cmo));
+	spin_lock_init(&vio_cmo.lock);
+	INIT_LIST_HEAD(&vio_cmo.device_list);
+	INIT_DELAYED_WORK(&vio_cmo.balance_q, vio_cmo_balance);
+
+	/* Get current system entitlement */
+	err = h_get_mpp(&mpp_data);
+
+	/*
+	 * On failure, continue with entitlement set to 0, will panic()
+	 * later when spare is reserved.
+	 */
+	if (err != H_SUCCESS) {
+		printk(KERN_ERR "%s: unable to determine system IO "\
+		       "entitlement. (%d)\n", __func__, err);
+		vio_cmo.entitled = 0;
+	} else {
+		vio_cmo.entitled = mpp_data.entitled_mem;
+	}
+
+	/* Set reservation and check against entitlement */
+	vio_cmo.spare = VIO_CMO_MIN_ENT;
+	vio_cmo.reserve.size = vio_cmo.spare;
+	vio_cmo.reserve.size += (vio_cmo_num_OF_devs() *
+	                         VIO_CMO_MIN_ENT);
+	if (vio_cmo.reserve.size > vio_cmo.entitled) {
+		printk(KERN_ERR "%s: insufficient system entitlement\n",
+		       __func__);
+		panic("%s: Insufficient system entitlement", __func__);
+	}
+
+	/* Set the remaining accounting variables */
+	vio_cmo.excess.size = vio_cmo.entitled - vio_cmo.reserve.size;
+	vio_cmo.excess.free = vio_cmo.excess.size;
+	vio_cmo.min = vio_cmo.reserve.size;
+	vio_cmo.desired = vio_cmo.reserve.size;
+}
+
+/* sysfs device functions and data structures for CMO */
+
+#define viodev_cmo_rd_attr(name)                                        \
+static ssize_t viodev_cmo_##name##_show(struct device *dev,             \
+                                        struct device_attribute *attr,  \
+                                         char *buf)                     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", to_vio_dev(dev)->cmo.name);        \
+}
+
+static ssize_t viodev_cmo_allocs_failed_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	return sprintf(buf, "%d\n", atomic_read(&viodev->cmo.allocs_failed));
+}
+
+static ssize_t viodev_cmo_allocs_failed_reset(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	atomic_set(&viodev->cmo.allocs_failed, 0);
+	return count;
+}
+
+static ssize_t viodev_cmo_desired_set(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	size_t new_desired;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &new_desired);
+	if (ret)
+		return ret;
+
+	vio_cmo_set_dev_desired(viodev, new_desired);
+	return count;
+}
+
+viodev_cmo_rd_attr(desired);
+viodev_cmo_rd_attr(entitled);
+viodev_cmo_rd_attr(allocated);
+
+static ssize_t name_show(struct device *, struct device_attribute *, char *);
+static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
+static struct device_attribute vio_cmo_dev_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(devspec),
+	__ATTR(cmo_desired,       S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_desired_show, viodev_cmo_desired_set),
+	__ATTR(cmo_entitled,      S_IRUGO, viodev_cmo_entitled_show,      NULL),
+	__ATTR(cmo_allocated,     S_IRUGO, viodev_cmo_allocated_show,     NULL),
+	__ATTR(cmo_allocs_failed, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_allocs_failed_show, viodev_cmo_allocs_failed_reset),
+	__ATTR_NULL
+};
+
+/* sysfs bus functions and data structures for CMO */
+
+#define viobus_cmo_rd_attr(name)                                        \
+static ssize_t                                                          \
+viobus_cmo_##name##_show(struct bus_type *bt, char *buf)                \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name);                     \
+}
+
+#define viobus_cmo_pool_rd_attr(name, var)                              \
+static ssize_t                                                          \
+viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf)     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
+}
+
+static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
+                                     size_t count)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.high = vio_cmo.curr;
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+
+	return count;
+}
+
+viobus_cmo_rd_attr(entitled);
+viobus_cmo_pool_rd_attr(reserve, size);
+viobus_cmo_pool_rd_attr(excess, size);
+viobus_cmo_pool_rd_attr(excess, free);
+viobus_cmo_rd_attr(spare);
+viobus_cmo_rd_attr(min);
+viobus_cmo_rd_attr(desired);
+viobus_cmo_rd_attr(curr);
+viobus_cmo_rd_attr(high);
+
+static struct bus_attribute vio_cmo_bus_attrs[] = {
+	__ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL),
+	__ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL),
+	__ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL),
+	__ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL),
+	__ATTR(cmo_spare,   S_IRUGO, viobus_cmo_spare_show,   NULL),
+	__ATTR(cmo_min,     S_IRUGO, viobus_cmo_min_show,     NULL),
+	__ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL),
+	__ATTR(cmo_curr,    S_IRUGO, viobus_cmo_curr_show,    NULL),
+	__ATTR(cmo_high,    S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viobus_cmo_high_show, viobus_cmo_high_reset),
+	__ATTR_NULL
+};
+
+static void vio_cmo_sysfs_init(void)
+{
+	vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
+	vio_bus_type.bus_attrs = vio_cmo_bus_attrs;
+}
+#else /* CONFIG_PPC_SMLPAR */
+/* Dummy functions for iSeries platform */
+int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
+static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
+static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
+static void vio_cmo_bus_init(void) {}
+static void vio_cmo_sysfs_init(void) { }
+#endif /* CONFIG_PPC_SMLPAR */
+EXPORT_SYMBOL(vio_cmo_entitlement_update);
+EXPORT_SYMBOL(vio_cmo_set_dev_desired);
+
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
 	const unsigned char *dma_window;
@@ -114,8 +1105,17 @@ static int vio_bus_probe(struct device *dev)
 		return error;
 
 	id = vio_match_device(viodrv->id_table, viodev);
-	if (id)
+	if (id) {
+		memset(&viodev->cmo, 0, sizeof(viodev->cmo));
+		if (firmware_has_feature(FW_FEATURE_CMO)) {
+			error = vio_cmo_bus_probe(viodev);
+			if (error)
+				return error;
+		}
 		error = viodrv->probe(viodev, id);
+		if (error && firmware_has_feature(FW_FEATURE_CMO))
+			vio_cmo_bus_remove(viodev);
+	}
 
 	return error;
 }
@@ -125,12 +1125,23 @@ static int vio_bus_remove(struct device *dev)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
 	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	struct device *devptr;
+	int ret = 1;
+
+	/*
+	 * Hold a reference to the device after the remove function is called
+	 * to allow for CMO accounting cleanup for the device.
+	 */
+	devptr = get_device(dev);
 
 	if (viodrv->remove)
-		return viodrv->remove(viodev);
+		ret = viodrv->remove(viodev);
+
+	if (!ret && firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_remove(viodev);
 
-	/* driver can't remove */
-	return 1;
+	put_device(devptr);
+	return ret;
 }
 
 /**
@@ -215,7 +1226,11 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 			viodev->unit_address = *unit_address;
 	}
 	viodev->dev.archdata.of_node = of_node_get(of_node);
-	viodev->dev.archdata.dma_ops = &dma_iommu_ops;
+
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_set_dma_ops(viodev);
+	else
+		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
 	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
 	viodev->dev.archdata.numa_node = of_node_to_nid(of_node);
 
@@ -245,6 +1260,9 @@ static int __init vio_bus_init(void)
 	int err;
 	struct device_node *node_vroot;
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_sysfs_init();
+
 	err = bus_register(&vio_bus_type);
 	if (err) {
 		printk(KERN_ERR "failed to register VIO bus\n");
@@ -262,6 +1280,9 @@ static int __init vio_bus_init(void)
 		return err;
 	}
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_init();
+
 	node_vroot = of_find_node_by_name(NULL, "vdevice");
 	if (node_vroot) {
 		struct device_node *of_node;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 87a72c66ce2..9f6c1ca1739 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -9,6 +9,25 @@
 
 ENTRY(_stext)
 
+PHDRS {
+	kernel PT_LOAD FLAGS(7); /* RWX */
+	notes PT_NOTE FLAGS(0);
+	dummy PT_NOTE FLAGS(0);
+
+	/* binutils < 2.18 has a bug that makes it misbehave when taking an
+	   ELF file with all segments at load address 0 as input.  This
+	   happens when running "strip" on vmlinux, because of the AT() magic
+	   in this linker script.  People using GCC >= 4.2 won't run into
+	   this problem, because the "build-id" support will put some data
+	   into the "notes" segment (at a non-zero load address).
+
+	   To work around this, we force some data into both the "dummy"
+	   segment and the kernel segment, so the dummy segment will get a
+	   non-zero load address.  It's not enough to always create the
+	   "notes" segment, since if nothing gets assigned to it, its load
+	   address will be zero.  */
+}
+
 #ifdef CONFIG_PPC64
 OUTPUT_ARCH(powerpc:common64)
 jiffies = jiffies_64;
@@ -47,10 +66,11 @@ SECTIONS
 		__got2_end = .;
 #endif /* CONFIG_PPC32 */
 
-		. = ALIGN(PAGE_SIZE);
-		_etext = .;
-		PROVIDE32 (etext = .);
-	}
+	} :kernel
+
+	. = ALIGN(PAGE_SIZE);
+	_etext = .;
+	PROVIDE32 (etext = .);
 
 	/* Read-only data */
 	RODATA
@@ -62,7 +82,13 @@ SECTIONS
 		__stop___ex_table = .;
 	}
 
-	NOTES
+	NOTES :kernel :notes
+
+	/* The dummy segment contents for the bug workaround mentioned above
+	   near PHDRS.  */
+	.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
+		LONG(0xf177)
+	} :kernel :dummy
 
 /*
  * Init sections discarded at runtime
@@ -74,7 +100,7 @@ SECTIONS
 		_sinittext = .;
 		INIT_TEXT
 		_einittext = .;
-	}
+	} :kernel
 
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 75dff7cfa81..5a5602da509 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -177,7 +177,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
 	                                            vcpu->arch.msr & MSR_PR);
 }
 
-void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
+void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                           gva_t eend, u32 asid)
 {
 	unsigned int pid = asid & 0xff;
 	int i;
@@ -191,7 +192,7 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
 		if (!get_tlb_v(stlbe))
 			continue;
 
-		if (eaddr < get_tlb_eaddr(stlbe))
+		if (eend < get_tlb_eaddr(stlbe))
 			continue;
 
 		if (eaddr > get_tlb_end(stlbe))
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index d0d358d367e..04e3449e1f4 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -4,7 +4,7 @@
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
 kvm-objs := $(common-objs) powerpc.o emulate.o booke_guest.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 00009746128..8c605d0a548 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -137,7 +137,7 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst)
 	if (tlbe->word0 & PPC44x_TLB_VALID) {
 		eaddr = get_tlb_eaddr(tlbe);
 		asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid;
-		kvmppc_mmu_invalidate(vcpu, eaddr, asid);
+		kvmppc_mmu_invalidate(vcpu, eaddr, get_tlb_end(tlbe), asid);
 	}
 
 	switch (ws) {
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 777e0f34e0e..53826a5f6c0 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -145,6 +145,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_USER_MEMORY:
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	default:
 		r = 0;
 		break;
@@ -167,6 +170,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
+
 struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 {
 	struct kvm_vcpu *vcpu;
@@ -240,10 +247,6 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
 }
 
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
                                     struct kvm_debug_guest *dbg)
 {
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 2a88e8b9a3c..d69912c07ce 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -6,12 +6,10 @@ ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS		+= -mno-minimal-toc
 endif
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y			:= string.o alloc.o \
 			   checksum_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
-endif
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
index 0559fe086eb..7c975d43e3f 100644
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <asm/page.h>
 #include <asm/code-patching.h>
 
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 4e43702b981..8c5a03be31e 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -99,7 +99,7 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 
 	for (; fcur < fend; fcur++) {
 		if (patch_feature_section(value, fcur)) {
-			__WARN();
+			WARN_ON(1);
 			printk("Unable to patch feature section at %p - %p" \
 				" with %p - %p\n",
 				calc_addr(fcur, fcur->start_off),
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index 49eb1f1a2bb..64e2e499e32 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -13,13 +13,7 @@
 #include <asm/ppc_asm.h>
 
 	.section __ex_table,"a"
-#ifdef CONFIG_PPC64
-	.align	3
-#define EXTBL	.llong
-#else
-	.align	2
-#define EXTBL	.long
-#endif
+	PPC_LONG_ALIGN
 	.text
 	
 _GLOBAL(strcpy)
@@ -160,9 +154,9 @@ _GLOBAL(__clear_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	11b,90b
-	EXTBL	1b,91b
-	EXTBL	8b,92b
+	PPC_LONG	11b,90b
+	PPC_LONG	1b,91b
+	PPC_LONG	8b,92b
 	.text
 
 _GLOBAL(__strncpy_from_user)
@@ -183,7 +177,7 @@ _GLOBAL(__strncpy_from_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	1b,99b
+	PPC_LONG	1b,99b
 	.text
 
 /* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
@@ -208,4 +202,4 @@ _GLOBAL(__strnlen_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	1b,99b
+	PPC_LONG	1b,99b
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1c00e0196f6..e7392b45a5e 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -12,7 +12,8 @@ obj-y				:= fault.o mem.o \
 				   mmu_context_$(CONFIG_WORD_SIZE).o
 hash-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC64)		+= hash_utils_64.o \
-				   slb_low.o slb.o stab.o mmap.o $(hash-y)
+				   slb_low.o slb.o stab.o \
+				   gup.o mmap.o $(hash-y)
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
 				   tlb_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 1707d00331f..565b7a237c8 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs)
 	return 0;
 }
 
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-static void do_dabr(struct pt_regs *regs, unsigned long address,
-		    unsigned long error_code)
-{
-	siginfo_t info;
-
-	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
-			11, SIGSEGV) == NOTIFY_STOP)
-		return;
-
-	if (debugger_dabr_match(regs))
-		return;
-
-	/* Clear the DABR */
-	set_dabr(0);
-
-	/* Deliver the signal to userspace */
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code = TRAP_HWBKPT;
-	info.si_addr = (void __user *)address;
-	force_sig_info(SIGTRAP, &info, current);
-}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-
 /*
  * For 600- and 800-family processors, the error_code parameter is DSISR
  * for a data fault, SRR1 for an instruction fault. For 400-family processors
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 00000000000..9fdf4d6335e
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,280 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask, result;
+	pte_t *ptep;
+
+	result = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		result |= _PAGE_RW;
+	mask = result | _PAGE_SPECIAL;
+
+	ptep = pte_offset_kernel(&pmd, addr);
+	do {
+		pte_t pte = *ptep;
+		struct page *page;
+
+		if ((pte_val(pte) & mask) != result)
+			return 0;
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		if (!page_cache_get_speculative(page))
+			return 0;
+		if (unlikely(pte != *ptep)) {
+			put_page(page);
+			return 0;
+		}
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+
+	return 1;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
+				 unsigned long *addr, unsigned long end,
+				 int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	unsigned long pte_end;
+	struct page *head, *page;
+	pte_t pte;
+	int refs;
+
+	pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
+	if (pte_end < end)
+		end = pte_end;
+
+	pte = *ptep;
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (*addr += PAGE_SIZE, *addr != end);
+
+	if (!page_cache_add_speculative(head, refs)) {
+		*nr -= refs;
+		return 0;
+	}
+	if (unlikely(pte != *ptep)) {
+		/* Could be optimized better */
+		while (*nr) {
+			put_page(page);
+			(*nr)--;
+		}
+	}
+
+	return 1;
+}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+			return 0;
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+			return 0;
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int psize, nr = 0;
+	unsigned int shift;
+
+	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, len)))
+		goto slow_irqon;
+
+	pr_debug("  aligned: %lx .. %lx\n", start, end);
+
+#ifdef CONFIG_HUGETLB_PAGE
+	/* We bail out on slice boundary crossing when hugetlb is
+	 * enabled in order to not have to deal with two different
+	 * page table formats
+	 */
+	if (addr < SLICE_LOW_TOP) {
+		if (end > SLICE_LOW_TOP)
+			goto slow_irqon;
+
+		if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
+			     GET_LOW_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	} else {
+		if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
+			     GET_HIGH_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables from being freed on powerpc.
+	 *
+	 * So long as we atomically load page table pointers versus teardown,
+	 * we can follow the address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_defs[psize].shift;
+
+#ifdef CONFIG_HUGETLB_PAGE
+	if (unlikely(mmu_huge_psizes[psize])) {
+		pte_t *ptep;
+		unsigned long a = addr;
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+
+		BUG_ON(!hstate);
+		/*
+		 * XXX: could be optimized to avoid hstate
+		 * lookup entirely (just use shift)
+		 */
+
+		do {
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
+			ptep = huge_pte_offset(mm, a);
+			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
+						   &nr))
+				goto slow;
+		} while (a != end);
+	} else
+#endif /* CONFIG_HUGETLB_PAGE */
+	{
+		pgdp = pgd_offset(mm, addr);
+		do {
+			pgd_t pgd = *pgdp;
+
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+			pr_debug("  %016lx: normal pgd %p\n", addr, (void *)pgd);
+			next = pgd_addr_end(addr, end);
+			if (pgd_none(pgd))
+				goto slow;
+			if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+				goto slow;
+		} while (pgdp++, addr = next, addr != end);
+	}
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		pr_debug("  slow path ! nr = %d\n", nr);
+
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 8d3b58ebd38..8920eea3452 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -68,6 +68,7 @@
 
 #define KB (1024)
 #define MB (1024*KB)
+#define GB (1024L*MB)
 
 /*
  * Note:  pte   --> Linux PTE
@@ -102,7 +103,6 @@ int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
 u16 mmu_slb_size = 64;
 #ifdef CONFIG_HUGETLB_PAGE
-int mmu_huge_psize = MMU_PAGE_16M;
 unsigned int HPAGE_SHIFT;
 #endif
 #ifdef CONFIG_PPC_64K_PAGES
@@ -151,39 +151,58 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	},
 };
 
+static unsigned long htab_convert_pte_flags(unsigned long pteflags)
+{
+	unsigned long rflags = pteflags & 0x1fa;
+
+	/* _PAGE_EXEC -> NOEXEC */
+	if ((pteflags & _PAGE_EXEC) == 0)
+		rflags |= HPTE_R_N;
+
+	/* PP bits. PAGE_USER is already PP bit 0x2, so we only
+	 * need to add in 0x1 if it's a read-only user page
+	 */
+	if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) &&
+					 (pteflags & _PAGE_DIRTY)))
+		rflags |= 1;
+
+	/* Always add C */
+	return rflags | HPTE_R_C;
+}
 
 int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
-		      unsigned long pstart, unsigned long mode,
+		      unsigned long pstart, unsigned long prot,
 		      int psize, int ssize)
 {
 	unsigned long vaddr, paddr;
 	unsigned int step, shift;
-	unsigned long tmp_mode;
 	int ret = 0;
 
 	shift = mmu_psize_defs[psize].shift;
 	step = 1 << shift;
 
+	prot = htab_convert_pte_flags(prot);
+
+	DBG("htab_bolt_mapping(%lx..%lx -> %lx (%lx,%d,%d)\n",
+	    vstart, vend, pstart, prot, psize, ssize);
+
 	for (vaddr = vstart, paddr = pstart; vaddr < vend;
 	     vaddr += step, paddr += step) {
 		unsigned long hash, hpteg;
 		unsigned long vsid = get_kernel_vsid(vaddr, ssize);
 		unsigned long va = hpt_va(vaddr, vsid, ssize);
+		unsigned long tprot = prot;
 
-		tmp_mode = mode;
-		
-		/* Make non-kernel text non-executable */
-		if (!in_kernel_text(vaddr))
-			tmp_mode = mode | HPTE_R_N;
+		/* Make kernel text executable */
+		if (in_kernel_text(vaddr))
+			tprot &= ~HPTE_R_N;
 
 		hash = hpt_hash(va, shift, ssize);
 		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
-		DBG("htab_bolt_mapping: calling %p\n", ppc_md.hpte_insert);
-
 		BUG_ON(!ppc_md.hpte_insert);
-		ret = ppc_md.hpte_insert(hpteg, va, paddr,
-				tmp_mode, HPTE_V_BOLTED, psize, ssize);
+		ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot,
+					 HPTE_V_BOLTED, psize, ssize);
 
 		if (ret < 0)
 			break;
@@ -329,6 +348,44 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 	return 0;
 }
 
+/* Scan for 16G memory blocks that have been set aside for huge pages
+ * and reserve those blocks for 16G huge pages.
+ */
+static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
+					const char *uname, int depth,
+					void *data) {
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	unsigned long *addr_prop;
+	u32 *page_count_prop;
+	unsigned int expected_pages;
+	long unsigned int phys_addr;
+	long unsigned int block_size;
+
+	/* We are scanning "memory" nodes only */
+	if (type == NULL || strcmp(type, "memory") != 0)
+		return 0;
+
+	/* This property is the log base 2 of the number of virtual pages that
+	 * will represent this memory block. */
+	page_count_prop = of_get_flat_dt_prop(node, "ibm,expected#pages", NULL);
+	if (page_count_prop == NULL)
+		return 0;
+	expected_pages = (1 << page_count_prop[0]);
+	addr_prop = of_get_flat_dt_prop(node, "reg", NULL);
+	if (addr_prop == NULL)
+		return 0;
+	phys_addr = addr_prop[0];
+	block_size = addr_prop[1];
+	if (block_size != (16 * GB))
+		return 0;
+	printk(KERN_INFO "Huge page(16GB) memory: "
+			"addr = 0x%lX size = 0x%lX pages = %d\n",
+			phys_addr, block_size, expected_pages);
+	lmb_reserve(phys_addr, block_size * expected_pages);
+	add_gpage(phys_addr, block_size, expected_pages);
+	return 0;
+}
+
 static void __init htab_init_page_sizes(void)
 {
 	int rc;
@@ -418,15 +475,18 @@ static void __init htab_init_page_sizes(void)
 	       );
 
 #ifdef CONFIG_HUGETLB_PAGE
-	/* Init large page size. Currently, we pick 16M or 1M depending
+	/* Reserve 16G huge page memory sections for huge pages */
+	of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
+
+/* Set default large page size. Currently, we pick 16M or 1M depending
 	 * on what is available
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift)
-		set_huge_psize(MMU_PAGE_16M);
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
 	/* With 4k/4level pagetables, we can't (for now) cope with a
 	 * huge page size < PMD_SIZE */
 	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
-		set_huge_psize(MMU_PAGE_1M);
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
 #endif /* CONFIG_HUGETLB_PAGE */
 }
 
@@ -478,9 +538,9 @@ static unsigned long __init htab_get_table_size(void)
 #ifdef CONFIG_MEMORY_HOTPLUG
 void create_section_mapping(unsigned long start, unsigned long end)
 {
-		BUG_ON(htab_bolt_mapping(start, end, __pa(start),
-			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
-			mmu_linear_psize, mmu_kernel_ssize));
+	BUG_ON(htab_bolt_mapping(start, end, __pa(start),
+				 PAGE_KERNEL, mmu_linear_psize,
+				 mmu_kernel_ssize));
 }
 
 int remove_section_mapping(unsigned long start, unsigned long end)
@@ -529,7 +589,7 @@ void __init htab_initialize(void)
 {
 	unsigned long table;
 	unsigned long pteg_count;
-	unsigned long mode_rw;
+	unsigned long prot;
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
@@ -587,7 +647,7 @@ void __init htab_initialize(void)
 		mtspr(SPRN_SDR1, _SDR1);
 	}
 
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
+	prot = PAGE_KERNEL;
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
@@ -606,7 +666,8 @@ void __init htab_initialize(void)
 		base = (unsigned long)__va(lmb.memory.region[i].base);
 		size = lmb.memory.region[i].size;
 
-		DBG("creating mapping for region: %lx : %lx\n", base, size);
+		DBG("creating mapping for region: %lx..%lx (prot: %x)\n",
+		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
@@ -623,21 +684,21 @@ void __init htab_initialize(void)
 			unsigned long dart_table_end = dart_tablebase + 16 * MB;
 			if (base != dart_tablebase)
 				BUG_ON(htab_bolt_mapping(base, dart_tablebase,
-							__pa(base), mode_rw,
+							__pa(base), prot,
 							mmu_linear_psize,
 							mmu_kernel_ssize));
 			if ((base + size) > dart_table_end)
 				BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
 							base + size,
 							__pa(dart_table_end),
-							 mode_rw,
+							 prot,
 							 mmu_linear_psize,
 							 mmu_kernel_ssize));
 			continue;
 		}
 #endif /* CONFIG_U3_DART */
 		BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
-				mode_rw, mmu_linear_psize, mmu_kernel_ssize));
+				prot, mmu_linear_psize, mmu_kernel_ssize));
        }
 
 	/*
@@ -655,7 +716,7 @@ void __init htab_initialize(void)
 			tce_alloc_start = base + size + 1;
 
 		BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end,
-					 __pa(tce_alloc_start), mode_rw,
+					 __pa(tce_alloc_start), prot,
 					 mmu_linear_psize, mmu_kernel_ssize));
 	}
 
@@ -847,7 +908,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* Handle hugepage regions */
-	if (HPAGE_SHIFT && psize == mmu_huge_psize) {
+	if (HPAGE_SHIFT && mmu_huge_psizes[psize]) {
 		DBG_LOW(" -> huge page !\n");
 		return hash_huge_page(mm, access, ea, vsid, local, trap);
 	}
@@ -1076,8 +1137,7 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
 	unsigned long hash, hpteg;
 	unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize);
 	unsigned long va = hpt_va(vaddr, vsid, mmu_kernel_ssize);
-	unsigned long mode = _PAGE_ACCESSED | _PAGE_DIRTY |
-		_PAGE_COHERENT | PP_RWXX | HPTE_R_N;
+	unsigned long mode = htab_convert_pte_flags(PAGE_KERNEL);
 	int ret;
 
 	hash = hpt_hash(va, PAGE_SHIFT, mmu_kernel_ssize);
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 0d12fba31bc..f1c2d55b437 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -24,21 +24,43 @@
 #include <asm/cputable.h>
 #include <asm/spu.h>
 
-#define HPAGE_SHIFT_64K	16
-#define HPAGE_SHIFT_16M	24
+#define PAGE_SHIFT_64K	16
+#define PAGE_SHIFT_16M	24
+#define PAGE_SHIFT_16G	34
 
 #define NUM_LOW_AREAS	(0x100000000UL >> SID_SHIFT)
 #define NUM_HIGH_AREAS	(PGTABLE_RANGE >> HTLB_AREA_SHIFT)
+#define MAX_NUMBER_GPAGES	1024
 
-unsigned int hugepte_shift;
-#define PTRS_PER_HUGEPTE	(1 << hugepte_shift)
-#define HUGEPTE_TABLE_SIZE	(sizeof(pte_t) << hugepte_shift)
+/* Tracks the 16G pages after the device tree is scanned and before the
+ * huge_boot_pages list is ready.  */
+static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
+static unsigned nr_gpages;
 
-#define HUGEPD_SHIFT		(HPAGE_SHIFT + hugepte_shift)
-#define HUGEPD_SIZE		(1UL << HUGEPD_SHIFT)
-#define HUGEPD_MASK		(~(HUGEPD_SIZE-1))
+/* Array of valid huge page sizes - non-zero value(hugepte_shift) is
+ * stored for the huge page sizes that are valid.
+ */
+unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
+
+#define hugepte_shift			mmu_huge_psizes
+#define PTRS_PER_HUGEPTE(psize)		(1 << hugepte_shift[psize])
+#define HUGEPTE_TABLE_SIZE(psize)	(sizeof(pte_t) << hugepte_shift[psize])
+
+#define HUGEPD_SHIFT(psize)		(mmu_psize_to_shift(psize) \
+						+ hugepte_shift[psize])
+#define HUGEPD_SIZE(psize)		(1UL << HUGEPD_SHIFT(psize))
+#define HUGEPD_MASK(psize)		(~(HUGEPD_SIZE(psize)-1))
+
+/* Subtract one from array size because we don't need a cache for 4K since
+ * is not a huge page size */
+#define huge_pgtable_cache(psize)	(pgtable_cache[HUGEPTE_CACHE_NUM \
+							+ psize-1])
+#define HUGEPTE_CACHE_NAME(psize)	(huge_pgtable_cache_name[psize])
 
-#define huge_pgtable_cache	(pgtable_cache[HUGEPTE_CACHE_NUM])
+static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
+	"unused_4K", "hugepte_cache_64K", "unused_64K_AP",
+	"hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+};
 
 /* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
  * will choke on pointers to hugepte tables, which is handy for
@@ -49,24 +71,49 @@ typedef struct { unsigned long pd; } hugepd_t;
 
 #define hugepd_none(hpd)	((hpd).pd == 0)
 
+static inline int shift_to_mmu_psize(unsigned int shift)
+{
+	switch (shift) {
+#ifndef CONFIG_PPC_64K_PAGES
+	case PAGE_SHIFT_64K:
+	    return MMU_PAGE_64K;
+#endif
+	case PAGE_SHIFT_16M:
+	    return MMU_PAGE_16M;
+	case PAGE_SHIFT_16G:
+	    return MMU_PAGE_16G;
+	}
+	return -1;
+}
+
+static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
+{
+	if (mmu_psize_defs[mmu_psize].shift)
+		return mmu_psize_defs[mmu_psize].shift;
+	BUG();
+}
+
 static inline pte_t *hugepd_page(hugepd_t hpd)
 {
 	BUG_ON(!(hpd.pd & HUGEPD_OK));
 	return (pte_t *)(hpd.pd & ~HUGEPD_OK);
 }
 
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
+				    struct hstate *hstate)
 {
-	unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
+	unsigned int shift = huge_page_shift(hstate);
+	int psize = shift_to_mmu_psize(shift);
+	unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1));
 	pte_t *dir = hugepd_page(*hpdp);
 
 	return dir + idx;
 }
 
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
-			   unsigned long address)
+			   unsigned long address, unsigned int psize)
 {
-	pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
+	pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize),
 				      GFP_KERNEL|__GFP_REPEAT);
 
 	if (! new)
@@ -74,7 +121,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 	spin_lock(&mm->page_table_lock);
 	if (!hugepd_none(*hpdp))
-		kmem_cache_free(huge_pgtable_cache, new);
+		kmem_cache_free(huge_pgtable_cache(psize), new);
 	else
 		hpdp->pd = (unsigned long)new | HUGEPD_OK;
 	spin_unlock(&mm->page_table_lock);
@@ -83,27 +130,60 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 /* Base page size affects how we walk hugetlb page tables */
 #ifdef CONFIG_PPC_64K_PAGES
-#define hpmd_offset(pud, addr)		pmd_offset(pud, addr)
-#define hpmd_alloc(mm, pud, addr)	pmd_alloc(mm, pud, addr)
+#define hpmd_offset(pud, addr, h)	pmd_offset(pud, addr)
+#define hpmd_alloc(mm, pud, addr, h)	pmd_alloc(mm, pud, addr)
 #else
 static inline
-pmd_t *hpmd_offset(pud_t *pud, unsigned long addr)
+pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
 {
-	if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
 		return pmd_offset(pud, addr);
 	else
 		return (pmd_t *) pud;
 }
 static inline
-pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
+pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
+		  struct hstate *hstate)
 {
-	if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
 		return pmd_alloc(mm, pud, addr);
 	else
 		return (pmd_t *) pud;
 }
 #endif
 
+/* Build list of addresses of gigantic pages.  This function is used in early
+ * boot before the buddy or bootmem allocator is setup.
+ */
+void add_gpage(unsigned long addr, unsigned long page_size,
+	unsigned long number_of_pages)
+{
+	if (!addr)
+		return;
+	while (number_of_pages > 0) {
+		gpage_freearray[nr_gpages] = addr;
+		nr_gpages++;
+		number_of_pages--;
+		addr += page_size;
+	}
+}
+
+/* Moves the gigantic page addresses from the temporary list to the
+ * huge_boot_pages list.
+ */
+int alloc_bootmem_huge_page(struct hstate *hstate)
+{
+	struct huge_bootmem_page *m;
+	if (nr_gpages == 0)
+		return 0;
+	m = phys_to_virt(gpage_freearray[--nr_gpages]);
+	gpage_freearray[nr_gpages] = 0;
+	list_add(&m->list, &huge_boot_pages);
+	m->hstate = hstate;
+	return 1;
+}
+
+
 /* Modelled after find_linux_pte() */
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
@@ -111,39 +191,52 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	pud_t *pu;
 	pmd_t *pm;
 
-	BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+	unsigned int psize;
+	unsigned int shift;
+	unsigned long sz;
+	struct hstate *hstate;
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_to_shift(psize);
+	sz = ((1UL) << shift);
+	hstate = size_to_hstate(sz);
 
-	addr &= HPAGE_MASK;
+	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
 	if (!pgd_none(*pg)) {
 		pu = pud_offset(pg, addr);
 		if (!pud_none(*pu)) {
-			pm = hpmd_offset(pu, addr);
+			pm = hpmd_offset(pu, addr, hstate);
 			if (!pmd_none(*pm))
-				return hugepte_offset((hugepd_t *)pm, addr);
+				return hugepte_offset((hugepd_t *)pm, addr,
+						      hstate);
 		}
 	}
 
 	return NULL;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pg;
 	pud_t *pu;
 	pmd_t *pm;
 	hugepd_t *hpdp = NULL;
+	struct hstate *hstate;
+	unsigned int psize;
+	hstate = size_to_hstate(sz);
 
-	BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+	psize = get_slice_psize(mm, addr);
+	BUG_ON(!mmu_huge_psizes[psize]);
 
-	addr &= HPAGE_MASK;
+	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
 	pu = pud_alloc(mm, pg, addr);
 
 	if (pu) {
-		pm = hpmd_alloc(mm, pu, addr);
+		pm = hpmd_alloc(mm, pu, addr, hstate);
 		if (pm)
 			hpdp = (hugepd_t *)pm;
 	}
@@ -151,10 +244,10 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	if (! hpdp)
 		return NULL;
 
-	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
+	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize))
 		return NULL;
 
-	return hugepte_offset(hpdp, addr);
+	return hugepte_offset(hpdp, addr, hstate);
 }
 
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
@@ -162,19 +255,22 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 0;
 }
 
-static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
+static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp,
+			       unsigned int psize)
 {
 	pte_t *hugepte = hugepd_page(*hpdp);
 
 	hpdp->pd = 0;
 	tlb->need_flush = 1;
-	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
+	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte,
+						 HUGEPTE_CACHE_NUM+psize-1,
 						 PGF_CACHENUM_MASK));
 }
 
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 				   unsigned long addr, unsigned long end,
-				   unsigned long floor, unsigned long ceiling)
+				   unsigned long floor, unsigned long ceiling,
+				   unsigned int psize)
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -186,7 +282,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 		next = pmd_addr_end(addr, end);
 		if (pmd_none(*pmd))
 			continue;
-		free_hugepte_range(tlb, (hugepd_t *)pmd);
+		free_hugepte_range(tlb, (hugepd_t *)pmd, psize);
 	} while (pmd++, addr = next, addr != end);
 
 	start &= PUD_MASK;
@@ -212,6 +308,9 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	pud_t *pud;
 	unsigned long next;
 	unsigned long start;
+	unsigned int shift;
+	unsigned int psize = get_slice_psize(tlb->mm, addr);
+	shift = mmu_psize_to_shift(psize);
 
 	start = addr;
 	pud = pud_offset(pgd, addr);
@@ -220,16 +319,18 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 #ifdef CONFIG_PPC_64K_PAGES
 		if (pud_none_or_clear_bad(pud))
 			continue;
-		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling,
+				       psize);
 #else
-		if (HPAGE_SHIFT == HPAGE_SHIFT_64K) {
+		if (shift == PAGE_SHIFT_64K) {
 			if (pud_none_or_clear_bad(pud))
 				continue;
-			hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+			hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
+					       ceiling, psize);
 		} else {
 			if (pud_none(*pud))
 				continue;
-			free_hugepte_range(tlb, (hugepd_t *)pud);
+			free_hugepte_range(tlb, (hugepd_t *)pud, psize);
 		}
 #endif
 	} while (pud++, addr = next, addr != end);
@@ -255,7 +356,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
  *
  * Must be called with pagetable lock held.
  */
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			    unsigned long addr, unsigned long end,
 			    unsigned long floor, unsigned long ceiling)
 {
@@ -297,31 +398,33 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb,
 	 * now has no other vmas using it, so can be freed, we don't
 	 * bother to round floor or end up - the tests don't need that.
 	 */
+	unsigned int psize = get_slice_psize(tlb->mm, addr);
 
-	addr &= HUGEPD_MASK;
+	addr &= HUGEPD_MASK(psize);
 	if (addr < floor) {
-		addr += HUGEPD_SIZE;
+		addr += HUGEPD_SIZE(psize);
 		if (!addr)
 			return;
 	}
 	if (ceiling) {
-		ceiling &= HUGEPD_MASK;
+		ceiling &= HUGEPD_MASK(psize);
 		if (!ceiling)
 			return;
 	}
 	if (end - 1 > ceiling - 1)
-		end -= HUGEPD_SIZE;
+		end -= HUGEPD_SIZE(psize);
 	if (addr > end - 1)
 		return;
 
 	start = addr;
-	pgd = pgd_offset((*tlb)->mm, addr);
+	pgd = pgd_offset(tlb->mm, addr);
 	do {
-		BUG_ON(get_slice_psize((*tlb)->mm, addr) != mmu_huge_psize);
+		psize = get_slice_psize(tlb->mm, addr);
+		BUG_ON(!mmu_huge_psizes[psize]);
 		next = pgd_addr_end(addr, end);
 		if (pgd_none_or_clear_bad(pgd))
 			continue;
-		hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
+		hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -334,7 +437,11 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		 * necessary anymore if we make hpte_need_flush() get the
 		 * page size from the slices
 		 */
-		pte_update(mm, addr & HPAGE_MASK, ptep, ~0UL, 1);
+		unsigned int psize = get_slice_psize(mm, addr);
+		unsigned int shift = mmu_psize_to_shift(psize);
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+		pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1);
 	}
 	*ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 }
@@ -351,14 +458,19 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 {
 	pte_t *ptep;
 	struct page *page;
+	unsigned int mmu_psize = get_slice_psize(mm, address);
 
-	if (get_slice_psize(mm, address) != mmu_huge_psize)
+	/* Verify it is a huge page else bail. */
+	if (!mmu_huge_psizes[mmu_psize])
 		return ERR_PTR(-EINVAL);
 
 	ptep = huge_pte_offset(mm, address);
 	page = pte_page(*ptep);
-	if (page)
-		page += (address % HPAGE_SIZE) / PAGE_SIZE;
+	if (page) {
+		unsigned int shift = mmu_psize_to_shift(mmu_psize);
+		unsigned long sz = ((1UL) << shift);
+		page += (address % sz) / PAGE_SIZE;
+	}
 
 	return page;
 }
@@ -368,6 +480,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -381,15 +498,16 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long len, unsigned long pgoff,
 					unsigned long flags)
 {
-	return slice_get_unmapped_area(addr, len, flags,
-				       mmu_huge_psize, 1, 0);
+	struct hstate *hstate = hstate_file(file);
+	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
 }
 
 /*
  * Called by asm hashtable.S for doing lazy icache flush
  */
 static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
-						  pte_t pte, int trap)
+					pte_t pte, int trap, unsigned long sz)
 {
 	struct page *page;
 	int i;
@@ -402,7 +520,7 @@ static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
 	/* page is dirty */
 	if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
 		if (trap == 0x400) {
-			for (i = 0; i < (HPAGE_SIZE / PAGE_SIZE); i++)
+			for (i = 0; i < (sz / PAGE_SIZE); i++)
 				__flush_dcache_icache(page_address(page+i));
 			set_bit(PG_arch_1, &page->flags);
 		} else {
@@ -418,11 +536,16 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 {
 	pte_t *ptep;
 	unsigned long old_pte, new_pte;
-	unsigned long va, rflags, pa;
+	unsigned long va, rflags, pa, sz;
 	long slot;
 	int err = 1;
 	int ssize = user_segment_size(ea);
+	unsigned int mmu_psize;
+	int shift;
+	mmu_psize = get_slice_psize(mm, ea);
 
+	if (!mmu_huge_psizes[mmu_psize])
+		goto out;
 	ptep = huge_pte_offset(mm, ea);
 
 	/* Search the Linux page table for a match with va */
@@ -465,30 +588,32 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 	rflags = 0x2 | (!(new_pte & _PAGE_RW));
  	/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
 	rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
+	shift = mmu_psize_to_shift(mmu_psize);
+	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
 		/* No CPU has hugepages but lacks no execute, so we
 		 * don't need to worry about that case */
 		rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte),
-						       trap);
+						       trap, sz);
 
 	/* Check if pte already has an hpte (case 2) */
 	if (unlikely(old_pte & _PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
 		unsigned long hash, slot;
 
-		hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+		hash = hpt_hash(va, shift, ssize);
 		if (old_pte & _PAGE_F_SECOND)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 		slot += (old_pte & _PAGE_F_GIX) >> 12;
 
-		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_huge_psize,
+		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
 					 ssize, local) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
 	if (likely(!(old_pte & _PAGE_HASHPTE))) {
-		unsigned long hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+		unsigned long hash = hpt_hash(va, shift, ssize);
 		unsigned long hpte_group;
 
 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
@@ -509,7 +634,7 @@ repeat:
 
 		/* Insert into the hash table, primary slot */
 		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
-					  mmu_huge_psize, ssize);
+					  mmu_psize, ssize);
 
 		/* Primary is full, try the secondary */
 		if (unlikely(slot == -1)) {
@@ -517,7 +642,7 @@ repeat:
 				      HPTES_PER_GROUP) & ~0x7UL; 
 			slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
 						  HPTE_V_SECONDARY,
-						  mmu_huge_psize, ssize);
+						  mmu_psize, ssize);
 			if (slot == -1) {
 				if (mftb() & 0x1)
 					hpte_group = ((hash & htab_hash_mask) *
@@ -549,45 +674,54 @@ void set_huge_psize(int psize)
 {
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable limits. */
-	if (mmu_psize_defs[psize].shift && mmu_psize_defs[psize].shift < SID_SHIFT &&
+	if (mmu_psize_defs[psize].shift &&
+		mmu_psize_defs[psize].shift < SID_SHIFT_1T &&
 		(mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
-			mmu_psize_defs[psize].shift == HPAGE_SHIFT_64K)) {
-		HPAGE_SHIFT = mmu_psize_defs[psize].shift;
-		mmu_huge_psize = psize;
-#ifdef CONFIG_PPC_64K_PAGES
-		hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-#else
-		if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
-			hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-		else
-			hugepte_shift = (PUD_SHIFT-HPAGE_SHIFT);
-#endif
-
+		 mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
+		 mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
+		/* Return if huge page size has already been setup or is the
+		 * same as the base page size. */
+		if (mmu_huge_psizes[psize] ||
+		   mmu_psize_defs[psize].shift == PAGE_SHIFT)
+			return;
+		hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
+
+		switch (mmu_psize_defs[psize].shift) {
+		case PAGE_SHIFT_64K:
+		    /* We only allow 64k hpages with 4k base page,
+		     * which was checked above, and always put them
+		     * at the PMD */
+		    hugepte_shift[psize] = PMD_SHIFT;
+		    break;
+		case PAGE_SHIFT_16M:
+		    /* 16M pages can be at two different levels
+		     * of pagestables based on base page size */
+		    if (PAGE_SHIFT == PAGE_SHIFT_64K)
+			    hugepte_shift[psize] = PMD_SHIFT;
+		    else /* 4k base page */
+			    hugepte_shift[psize] = PUD_SHIFT;
+		    break;
+		case PAGE_SHIFT_16G:
+		    /* 16G pages are always at PGD level */
+		    hugepte_shift[psize] = PGDIR_SHIFT;
+		    break;
+		}
+		hugepte_shift[psize] -= mmu_psize_defs[psize].shift;
 	} else
-		HPAGE_SHIFT = 0;
+		hugepte_shift[psize] = 0;
 }
 
 static int __init hugepage_setup_sz(char *str)
 {
 	unsigned long long size;
-	int mmu_psize = -1;
+	int mmu_psize;
 	int shift;
 
 	size = memparse(str, &str);
 
 	shift = __ffs(size);
-	switch (shift) {
-#ifndef CONFIG_PPC_64K_PAGES
-	case HPAGE_SHIFT_64K:
-		mmu_psize = MMU_PAGE_64K;
-		break;
-#endif
-	case HPAGE_SHIFT_16M:
-		mmu_psize = MMU_PAGE_16M;
-		break;
-	}
-
-	if (mmu_psize >=0 && mmu_psize_defs[mmu_psize].shift)
+	mmu_psize = shift_to_mmu_psize(shift);
+	if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift)
 		set_huge_psize(mmu_psize);
 	else
 		printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
@@ -596,23 +730,40 @@ static int __init hugepage_setup_sz(char *str)
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
-{
-	memset(addr, 0, kmem_cache_size(cache));
-}
-
 static int __init hugetlbpage_init(void)
 {
+	unsigned int psize;
+
 	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
 		return -ENODEV;
 
-	huge_pgtable_cache = kmem_cache_create("hugepte_cache",
-					       HUGEPTE_TABLE_SIZE,
-					       HUGEPTE_TABLE_SIZE,
-					       0,
-					       zero_ctor);
-	if (! huge_pgtable_cache)
-		panic("hugetlbpage_init(): could not create hugepte cache\n");
+	/* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
+	 * and adjust PTE_NONCACHE_NUM if the number of supported huge page
+	 * sizes changes.
+	 */
+	set_huge_psize(MMU_PAGE_16M);
+	set_huge_psize(MMU_PAGE_16G);
+
+	/* Temporarily disable support for 64K huge pages when 64K SPU local
+	 * store support is enabled as the current implementation conflicts.
+	 */
+#ifndef CONFIG_SPU_FS_64K_LS
+	set_huge_psize(MMU_PAGE_64K);
+#endif
+
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		if (mmu_huge_psizes[psize]) {
+			huge_pgtable_cache(psize) = kmem_cache_create(
+						HUGEPTE_CACHE_NAME(psize),
+						HUGEPTE_TABLE_SIZE(psize),
+						HUGEPTE_TABLE_SIZE(psize),
+						0,
+						NULL);
+			if (!huge_pgtable_cache(psize))
+				panic("hugetlbpage_init(): could not create %s"\
+				      "\n", HUGEPTE_CACHE_NAME(psize));
+		}
+	}
 
 	return 0;
 }
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 6ef63caca68..036fe2f10c7 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -136,9 +136,14 @@ static int __init setup_kcore(void)
 module_init(setup_kcore);
 #endif
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
+static void pgd_ctor(void *addr)
 {
-	memset(addr, 0, kmem_cache_size(cache));
+	memset(addr, 0, PGD_TABLE_SIZE);
+}
+
+static void pmd_ctor(void *addr)
+{
+	memset(addr, 0, PMD_TABLE_SIZE);
 }
 
 static const unsigned int pgtable_cache_size[2] = {
@@ -153,29 +158,18 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
 };
 
 #ifdef CONFIG_HUGETLB_PAGE
-/* Hugepages need one extra cache, initialized in hugetlbpage.c.  We
- * can't put into the tables above, because HPAGE_SHIFT is not compile
- * time constant. */
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
+/* Hugepages need an extra cache per hugepagesize, initialized in
+ * hugetlbpage.c.  We can't put into the tables above, because HPAGE_SHIFT
+ * is not compile time constant. */
+struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT];
 #else
 struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
 #endif
 
 void pgtable_cache_init(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
-		int size = pgtable_cache_size[i];
-		const char *name = pgtable_cache_name[i];
-
-		pr_debug("Allocating page table cache %s (#%d) "
-			"for size: %08x...\n", name, i, size);
-		pgtable_cache[i] = kmem_cache_create(name,
-						     size, size,
-						     SLAB_PANIC,
-						     zero_ctor);
-	}
+	pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
+	pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
@@ -212,13 +206,10 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
 int __meminit vmemmap_populate(struct page *start_page,
 			       unsigned long nr_pages, int node)
 {
-	unsigned long mode_rw;
 	unsigned long start = (unsigned long)start_page;
 	unsigned long end = (unsigned long)(start_page + nr_pages);
 	unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
 
-	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
-
 	/* Align to the page size of the linear mapping. */
 	start = _ALIGN_DOWN(start, page_size);
 
@@ -236,9 +227,9 @@ int __meminit vmemmap_populate(struct page *start_page,
 		pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
 			start, p, __pa(p));
 
-		mapped = htab_bolt_mapping(start, start + page_size,
-					__pa(p), mode_rw, mmu_vmemmap_psize,
-					mmu_kernel_ssize);
+		mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
+					   PAGE_KERNEL, mmu_vmemmap_psize,
+					   mmu_kernel_ssize);
 		BUG_ON(mapped < 0);
 	}
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 1ca2235f096..1c93c255873 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -186,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
 }
 EXPORT_SYMBOL_GPL(walk_memory_resource);
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-#ifdef CONFIG_HIGHMEM
-	printk("%ld pages of HIGHMEM\n", highmem);
-#endif
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * Initialize the bootmem system and give it all the memory we
  * have available.  If we are using highmem, we only put the
@@ -350,7 +311,7 @@ void __init paging_init(void)
 #endif /* CONFIG_HIGHMEM */
 
 	printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n",
-	       (u64)top_of_ram, total_ram);
+	       (unsigned long long)top_of_ram, total_ram);
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (long int)((top_of_ram - total_ram) >> 20));
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index cf4bffba6f7..d9a18135133 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -39,7 +39,6 @@ EXPORT_SYMBOL(numa_cpu_lookup_table);
 EXPORT_SYMBOL(numa_cpumask_lookup_table);
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES];
 static int min_common_depth;
 static int n_mem_addr_cells, n_mem_size_cells;
 
@@ -816,7 +815,7 @@ void __init do_init_bootmem(void)
   		dbg("node %d\n", nid);
 		dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
 
-		NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 		NODE_DATA(nid)->node_start_pfn = start_pfn;
 		NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index c7584072dfc..2001abdb191 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -145,13 +145,20 @@ void pte_free(struct mm_struct *mm, pgtable_t ptepage)
 void __iomem *
 ioremap(phys_addr_t addr, unsigned long size)
 {
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
+	return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
 }
 EXPORT_SYMBOL(ioremap);
 
 void __iomem *
 ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 {
+	/* writeable implies dirty for kernel addresses */
+	if (flags & _PAGE_RW)
+		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
+
+	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+	flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+
 	return __ioremap(addr, size, flags);
 }
 EXPORT_SYMBOL(ioremap_flags);
@@ -163,6 +170,14 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 	phys_addr_t p;
 	int err;
 
+	/* Make sure we have the base flags */
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= _PAGE_KERNEL;
+
+	/* Non-cacheable page cannot be coherent */
+	if (flags & _PAGE_NO_CACHE)
+		flags &= ~_PAGE_COHERENT;
+
 	/*
 	 * Choose an address to map it to.
 	 * Once the vmalloc system is running, we use it.
@@ -219,11 +234,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 		v = (ioremap_bot -= size);
 	}
 
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= _PAGE_KERNEL;
-	if (flags & _PAGE_NO_CACHE)
-		flags |= _PAGE_GUARDED;
-
 	/*
 	 * Should check if it is a candidate for a BAT mapping
 	 */
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 3ef0ad2f9ca..365e61ae5db 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -107,9 +107,18 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
 {
 	unsigned long i;
 
+	/* Make sure we have the base flags */
 	if ((flags & _PAGE_PRESENT) == 0)
 		flags |= pgprot_val(PAGE_KERNEL);
 
+	/* Non-cacheable page cannot be coherent */
+	if (flags & _PAGE_NO_CACHE)
+		flags &= ~_PAGE_COHERENT;
+
+	/* We don't support the 4K PFN hack with ioremap */
+	if (flags & _PAGE_4K_PFN)
+		return NULL;
+
 	WARN_ON(pa & ~PAGE_MASK);
 	WARN_ON(((unsigned long)ea) & ~PAGE_MASK);
 	WARN_ON(size & ~PAGE_MASK);
@@ -190,6 +199,13 @@ void __iomem * ioremap(phys_addr_t addr, unsigned long size)
 void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
 			     unsigned long flags)
 {
+	/* writeable implies dirty for kernel addresses */
+	if (flags & _PAGE_RW)
+		flags |= _PAGE_DIRTY;
+
+	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+	flags &= ~(_PAGE_USER | _PAGE_EXEC);
+
 	if (ppc_md.ioremap)
 		return ppc_md.ioremap(addr, size, flags);
 	return __ioremap(addr, size, flags);
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index c53145f6194..6aa12081377 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -236,8 +236,8 @@ void __init MMU_init_hw(void)
 
 	Hash_end = (struct hash_pte *) ((unsigned long)Hash + Hash_size);
 
-	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
-	       total_memory >> 20, Hash_size >> 10, Hash);
+	printk("Total memory = %lldMB; using %ldkB for hash table (at %p)\n",
+	       (unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash);
 
 
 	/*
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index a01b5c608ff..be7dd422c0f 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -34,7 +34,7 @@
 DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
 /* This is declared as we are using the more or less generic
- * include/asm-powerpc/tlb.h file -- tgall
+ * arch/powerpc/include/asm/tlb.h file -- tgall
  */
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
@@ -147,7 +147,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	 */
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-		psize = mmu_huge_psize;
+		psize = get_slice_psize(mm, addr);;
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index e55746b824b..89ecd76127d 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -24,7 +24,7 @@
 
 static struct resource warp_ndfc = {
 	.start = WARP_NAND_FLASH_REG_ADDR,
-	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE,
+	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1,
 	.flags = IORESOURCE_MEM,
 };
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 9565995cba7..960edf89be5 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -30,18 +30,6 @@ static __initdata struct of_device_id warp_of_bus[] = {
 	{},
 };
 
-static __initdata struct i2c_board_info warp_i2c_info[] = {
-	{ I2C_BOARD_INFO("ad7414", 0x4a) }
-};
-
-static int __init warp_arch_init(void)
-{
-	/* This should go away once support is moved to the dts. */
-	i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
-	return 0;
-}
-machine_arch_initcall(warp, warp_arch_init);
-
 static int __init warp_device_probe(void)
 {
 	of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -223,7 +211,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
 
 	/* These registers are in 1 degree increments. */
 	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
-	i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
 	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
 	if (np == NULL) {
@@ -289,8 +277,15 @@ found_it:
 	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
-		u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
-		out_be32(fpga + 0x20, temp);
+		int val;
+
+		val = i2c_smbus_read_word_data(client, 0);
+		if (val < 0)
+			dev_dbg(&client->dev, "DTM read temp failed.\n");
+		else {
+			s16 temp = swab16(val);
+			out_be32(fpga + 0x20, temp);
+		}
 
 		pika_dtm_check_fan(fpga);
 
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index acd2fc8cf49..696a5ee4962 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,8 +1,8 @@
 config PPC_MPC52xx
 	bool "52xx-based boards"
 	depends on PPC_MULTIPLATFORM && PPC32
-	select FSL_SOC
 	select PPC_CLOCK
+	select PPC_PCI_CHOICE
 
 config PPC_MPC5200_SIMPLE
 	bool "Generic support for simple MPC5200 based boards"
@@ -47,6 +47,7 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
 	bool "MPC5200 GPIO support"
 	depends on PPC_MPC52xx
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  Enable gpiolib support for mpc5200 based boards
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index daf0e1568d6..b8a52062738 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -1,10 +1,8 @@
 #
 # Makefile for 52xx based boards
 #
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y				+= mpc52xx_pic.o mpc52xx_common.o
 obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
-endif
 
 obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
 obj-$(CONFIG_PPC_EFIKA)		+= efika.o
@@ -15,4 +13,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
 	obj-$(CONFIG_PM)	+= lite5200_sleep.o lite5200_pm.o
 endif
 
-obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
\ No newline at end of file
+obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 1c8034bfa79..75eb1ede549 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -30,6 +30,7 @@ config EP8248E
 	select 8272
 	select 8260
 	select FSL_SOC
+	select PHYLIB
 	select MDIO_BITBANG
 	help
 	  This enables support for the Embedded Planet EP8248E board.
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index 373e993a5ed..d5770fdf7f0 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -59,7 +59,6 @@ static void __init ep8248e_pic_init(void)
 	of_node_put(np);
 }
 
-#ifdef CONFIG_FS_ENET_MDIO_FCC
 static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level)
 {
 	if (level)
@@ -165,7 +164,6 @@ static struct of_platform_driver ep8248e_mdio_driver = {
 	.probe = ep8248e_mdio_probe,
 	.remove = ep8248e_mdio_remove,
 };
-#endif
 
 struct cpm_pin {
 	int port, pin, flags;
@@ -298,9 +296,7 @@ static  __initdata struct of_device_id of_bus_ids[] = {
 static int __init declare_of_platform_devices(void)
 {
 	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-#ifdef CONFIG_FS_ENET_MDIO_FCC
 	of_register_platform_driver(&ep8248e_mdio_driver);
-#endif
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 27d9bf86de0..6159c5d4e5f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -2,7 +2,8 @@ menuconfig PPC_83xx
 	bool "83xx-based boards"
 	depends on 6xx && PPC_MULTIPLATFORM
 	select PPC_UDBG_16550
-	select PPC_INDIRECT_PCI
+	select PPC_PCI_CHOICE
+	select FSL_PCI if PCI
 	select FSL_SOC
 	select IPIC
 
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index f331fd7dd83..ba5028e2989 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the PowerPC 83xx linux kernel.
 #
 obj-y				:= misc.o usb.o
-obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index c4db5172b27..a428f8d1ac8 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -19,6 +19,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 6dbc6eabcb0..ec43477caa6 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -36,6 +36,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
@@ -104,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index e7f706b624f..0300268ce5b 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -27,6 +27,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
@@ -114,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 50e8f632061..76092d37c7d 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -35,11 +35,13 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
 static struct of_device_id __initdata mpc834x_itx_ids[] = {
 	{ .compatible = "fsl,pq2pro-localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 2b8a0a3f855..fc3f2ed1f3e 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
@@ -110,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void)
 static struct of_device_id mpc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index c2e5de60c05..9d46e5bdd10 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -42,6 +42,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
@@ -135,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void)
 static struct of_device_id mpc836x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index c10dec4bf17..a5273bb28e1 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -23,6 +23,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 64d17b0d645..be62de23bea 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -19,6 +19,7 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <asm/prom.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index c00356bdb1d..da030afa2e2 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -17,6 +17,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 88a3b5cabb1..2a7cbabb410 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -26,6 +26,8 @@
 #define MPC834X_SICRL_USB1         0x20000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
+#define MPC8315_SICRL_USB_MASK     0x000000fc
+#define MPC8315_SICRL_USB_ULPI     0x00000054
 #define MPC837X_SICRL_USB_MASK     0xf0000000
 #define MPC837X_SICRL_USB_ULPI     0x50000000
 
@@ -34,6 +36,8 @@
 #define MPC834X_SICRH_USB_UTMI     0x00020000
 #define MPC831X_SICRH_USB_MASK     0x000000e0
 #define MPC831X_SICRH_USB_ULPI     0x000000a0
+#define MPC8315_SICRH_USB_MASK     0x0000ff00
+#define MPC8315_SICRH_USB_ULPI     0x00000000
 
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
@@ -55,7 +59,6 @@
  * mpc83xx_* files. Mostly for use by mpc83xx_setup
  */
 
-extern int mpc83xx_add_bridge(struct device_node *dev);
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
 extern int mpc834x_usb_cfg(void);
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
deleted file mode 100644
index 14f1080c6c9..00000000000
--- a/arch/powerpc/platforms/83xx/pci.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * FSL SoC setup code
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int __init mpc83xx_add_bridge(struct device_node *dev)
-{
-	int len;
-	struct pci_controller *hose;
-	struct resource rsrc;
-	const int *bus_range;
-	int primary = 1, has_address = 0;
-	phys_addr_t immr = get_immrbase();
-
-	DBG("Adding PCI host bridge %s\n", dev->full_name);
-
-	/* Fetch host bridge registers address */
-	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
-	/* Get bus range if any */
-	bus_range = of_get_property(dev, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, assume"
-		       " bus 0\n", dev->full_name);
-	}
-
-	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
-	hose = pcibios_alloc_controller(dev);
-	if (!hose)
-		return -ENOMEM;
-
-	hose->first_busno = bus_range ? bus_range[0] : 0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
-	 * the other at 0x8600, we consider the 0x8500 the primary controller
-	 */
-	/* PCI 1 */
-	if ((rsrc.start & 0xfffff) == 0x8500) {
-		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
-	}
-	/* PCI 2 */
-	if ((rsrc.start & 0xfffff) == 0x8600) {
-		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
-		primary = 0;
-	}
-
-	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
-	       "Firmware bus number: %d->%d\n",
-	       (unsigned long long)rsrc.start, hose->first_busno,
-	       hose->last_busno);
-
-	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-	    hose, hose->cfg_addr, hose->cfg_data);
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(hose, dev, primary);
-
-	return 0;
-}
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index cf382474a83..156c4e21800 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -37,6 +37,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
@@ -82,6 +83,7 @@ static void __init sbc834x_init_IRQ(void)
 static struct __initdata of_device_id sbc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
new file mode 100644
index 00000000000..1930543c98d
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -0,0 +1,533 @@
+/*
+ * Enter and leave deep sleep state on MPC83xx
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+
+#define SS_MEMSAVE	0x00 /* First 8 bytes of RAM */
+#define SS_HID		0x08 /* 3 HIDs */
+#define SS_IABR		0x14 /* 2 IABRs */
+#define SS_IBCR		0x1c
+#define SS_DABR		0x20 /* 2 DABRs */
+#define SS_DBCR		0x28
+#define SS_SP		0x2c
+#define SS_SR		0x30 /* 16 segment registers */
+#define SS_R2		0x70
+#define SS_MSR		0x74
+#define SS_SDR1		0x78
+#define SS_LR		0x7c
+#define SS_SPRG		0x80 /* 4 SPRGs */
+#define SS_DBAT		0x90 /* 8 DBATs */
+#define SS_IBAT		0xd0 /* 8 IBATs */
+#define SS_TB		0x110
+#define SS_CR		0x118
+#define SS_GPREG	0x11c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x16c
+
+	.section .data
+	.align	5
+
+mpc83xx_sleep_save_area:
+	.space	STATE_SAVE_SIZE
+immrbase:
+	.long	0
+
+	.section .text
+	.align	5
+
+	/* r3 = physical address of IMMR */
+_GLOBAL(mpc83xx_enter_deep_sleep)
+	lis	r4, immrbase@ha
+	stw	r3, immrbase@l(r4)
+
+	/* The first 2 words of memory are used to communicate with the
+	 * bootloader, to tell it how to resume.
+	 *
+	 * The first word is the magic number 0xf5153ae5, and the second
+	 * is the pointer to mpc83xx_deep_resume.
+	 *
+	 * The original content of these two words is saved in SS_MEMSAVE.
+	 */
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+
+	lis	r4, KERNELBASE@h
+	lwz	r5, 0(r4)
+	lwz	r6, 4(r4)
+
+	stw	r5, SS_MEMSAVE+0(r3)
+	stw	r6, SS_MEMSAVE+4(r3)
+
+	mfspr	r5, SPRN_HID0
+	mfspr	r6, SPRN_HID1
+	mfspr	r7, SPRN_HID2
+
+	stw	r5, SS_HID+0(r3)
+	stw	r6, SS_HID+4(r3)
+	stw	r7, SS_HID+8(r3)
+
+	mfspr	r4, SPRN_IABR
+	mfspr	r5, SPRN_IABR2
+	mfspr	r6, SPRN_IBCR
+	mfspr	r7, SPRN_DABR
+	mfspr	r8, SPRN_DABR2
+	mfspr	r9, SPRN_DBCR
+
+	stw	r4, SS_IABR+0(r3)
+	stw	r5, SS_IABR+4(r3)
+	stw	r6, SS_IBCR(r3)
+	stw	r7, SS_DABR+0(r3)
+	stw	r8, SS_DABR+4(r3)
+	stw	r9, SS_DBCR(r3)
+
+	mfspr	r4, SPRN_SPRG0
+	mfspr	r5, SPRN_SPRG1
+	mfspr	r6, SPRN_SPRG2
+	mfspr	r7, SPRN_SPRG3
+	mfsdr1	r8
+
+	stw	r4, SS_SPRG+0(r3)
+	stw	r5, SS_SPRG+4(r3)
+	stw	r6, SS_SPRG+8(r3)
+	stw	r7, SS_SPRG+12(r3)
+	stw	r8, SS_SDR1(r3)
+
+	mfspr	r4, SPRN_DBAT0U
+	mfspr	r5, SPRN_DBAT0L
+	mfspr	r6, SPRN_DBAT1U
+	mfspr	r7, SPRN_DBAT1L
+
+	stw	r4, SS_DBAT+0x00(r3)
+	stw	r5, SS_DBAT+0x04(r3)
+	stw	r6, SS_DBAT+0x08(r3)
+	stw	r7, SS_DBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_DBAT2U
+	mfspr	r5, SPRN_DBAT2L
+	mfspr	r6, SPRN_DBAT3U
+	mfspr	r7, SPRN_DBAT3L
+
+	stw	r4, SS_DBAT+0x10(r3)
+	stw	r5, SS_DBAT+0x14(r3)
+	stw	r6, SS_DBAT+0x18(r3)
+	stw	r7, SS_DBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_DBAT4U
+	mfspr	r5, SPRN_DBAT4L
+	mfspr	r6, SPRN_DBAT5U
+	mfspr	r7, SPRN_DBAT5L
+
+	stw	r4, SS_DBAT+0x20(r3)
+	stw	r5, SS_DBAT+0x24(r3)
+	stw	r6, SS_DBAT+0x28(r3)
+	stw	r7, SS_DBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_DBAT6U
+	mfspr	r5, SPRN_DBAT6L
+	mfspr	r6, SPRN_DBAT7U
+	mfspr	r7, SPRN_DBAT7L
+
+	stw	r4, SS_DBAT+0x30(r3)
+	stw	r5, SS_DBAT+0x34(r3)
+	stw	r6, SS_DBAT+0x38(r3)
+	stw	r7, SS_DBAT+0x3c(r3)
+
+	mfspr	r4, SPRN_IBAT0U
+	mfspr	r5, SPRN_IBAT0L
+	mfspr	r6, SPRN_IBAT1U
+	mfspr	r7, SPRN_IBAT1L
+
+	stw	r4, SS_IBAT+0x00(r3)
+	stw	r5, SS_IBAT+0x04(r3)
+	stw	r6, SS_IBAT+0x08(r3)
+	stw	r7, SS_IBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_IBAT2U
+	mfspr	r5, SPRN_IBAT2L
+	mfspr	r6, SPRN_IBAT3U
+	mfspr	r7, SPRN_IBAT3L
+
+	stw	r4, SS_IBAT+0x10(r3)
+	stw	r5, SS_IBAT+0x14(r3)
+	stw	r6, SS_IBAT+0x18(r3)
+	stw	r7, SS_IBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_IBAT4U
+	mfspr	r5, SPRN_IBAT4L
+	mfspr	r6, SPRN_IBAT5U
+	mfspr	r7, SPRN_IBAT5L
+
+	stw	r4, SS_IBAT+0x20(r3)
+	stw	r5, SS_IBAT+0x24(r3)
+	stw	r6, SS_IBAT+0x28(r3)
+	stw	r7, SS_IBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_IBAT6U
+	mfspr	r5, SPRN_IBAT6L
+	mfspr	r6, SPRN_IBAT7U
+	mfspr	r7, SPRN_IBAT7L
+
+	stw	r4, SS_IBAT+0x30(r3)
+	stw	r5, SS_IBAT+0x34(r3)
+	stw	r6, SS_IBAT+0x38(r3)
+	stw	r7, SS_IBAT+0x3c(r3)
+
+	mfmsr	r4
+	mflr	r5
+	mfcr	r6
+
+	stw	r4, SS_MSR(r3)
+	stw	r5, SS_LR(r3)
+	stw	r6, SS_CR(r3)
+	stw	r1, SS_SP(r3)
+	stw	r2, SS_R2(r3)
+
+1:	mftbu	r4
+	mftb	r5
+	mftbu	r6
+	cmpw	r4, r6
+	bne	1b
+
+	stw	r4, SS_TB+0(r3)
+	stw	r5, SS_TB+4(r3)
+
+	stmw	r12, SS_GPREG(r3)
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	mfsrin	r5, r4
+	stwu	r5, 4(r6)
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	/* Disable machine checks and critical exceptions */
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~MSR_CE
+	rlwinm	r4, r4, 0, ~MSR_ME
+	mtmsr	r4
+	isync
+
+#define TMP_VIRT_IMMR		0xf0000000
+#define DEFAULT_IMMR_VALUE	0xff400000
+#define IMMRBAR_BASE		0x0000
+
+	lis	r4, immrbase@ha
+	lwz	r4, immrbase@l(r4)
+
+	/* Use DBAT0 to address the current IMMR space */
+
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT0L, r4
+	lis	r8, TMP_VIRT_IMMR@h
+	ori	r4, r8, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT0U, r4
+	isync
+
+	/* Use DBAT1 to address the original IMMR space */
+
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT1L, r4
+	lis	r9, (TMP_VIRT_IMMR + 0x01000000)@h
+	ori	r4, r9, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT1U, r4
+	isync
+
+	/* Use DBAT2 to address the beginning of RAM.  This isn't done
+	 * using the normal virtual mapping, because with page debugging
+	 * enabled it will be read-only.
+	 */
+
+	li	r4, 0x0002
+	mtspr	SPRN_DBAT2L, r4
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT2U, r4
+	isync
+
+	/* Flush the cache with our BAT, as there will be TLB misses
+	 * otherwise if page debugging is enabled, and these misses
+	 * will disturb the PLRU algorithm.
+	 */
+
+	bl	__flush_disable_L1
+
+	/* Keep the i-cache enabled, so the hack below for low-boot
+	 * flash will work.
+	 */
+	mfspr	r3, SPRN_HID0
+	ori	r3, r3, HID0_ICE
+	mtspr	SPRN_HID0, r3
+	isync
+
+	lis	r6, 0xf515
+	ori	r6, r6, 0x3ae5
+
+	lis	r7, mpc83xx_deep_resume@h
+	ori	r7, r7, mpc83xx_deep_resume@l
+	tophys(r7, r7)
+
+	lis	r5, KERNELBASE@h
+	stw	r6, 0(r5)
+	stw	r7, 4(r5)
+
+	/* Reset BARs */
+
+	li	r4, 0
+	stw	r4, 0x0024(r8)
+	stw	r4, 0x002c(r8)
+	stw	r4, 0x0034(r8)
+	stw	r4, 0x003c(r8)
+	stw	r4, 0x0064(r8)
+	stw	r4, 0x006c(r8)
+
+	/* Rev 1 of the 8313 has problems with wakeup events that are
+	 * pending during the transition to deep sleep state (such as if
+	 * the PCI host sets the state to D3 and then D0 in rapid
+	 * succession).  This check shrinks the race window somewhat.
+	 *
+	 * See erratum PCI23, though the problem is not limited
+	 * to PCI.
+	 */
+
+	lwz	r3, 0x0b04(r8)
+	andi.	r3, r3, 1
+	bne-	mpc83xx_deep_resume
+
+	/* Move IMMR back to the default location, following the
+	 * procedure specified in the MPC8313 manual.
+	 */
+	lwz	r4, IMMRBAR_BASE(r8)
+	isync
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	stw	r4, IMMRBAR_BASE(r8)
+	lis	r4, KERNELBASE@h
+	lwz	r4, 0(r4)
+	isync
+	lwz	r4, IMMRBAR_BASE(r9)
+	mr	r8, r9
+	isync
+
+	/* Check the Reset Configuration Word to see whether flash needs
+	 * to be mapped at a low address or a high address.
+	 */
+
+	lwz	r4, 0x0904(r8)
+	andis.	r4, r4, 0x0400
+	li	r4, 0
+	beq	boot_low
+	lis	r4, 0xff80
+boot_low:
+	stw	r4, 0x0020(r8)
+	lis	r7, 0x8000
+	ori	r7, r7, 0x0016
+
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+	oris	r5, r5, HID0_SLEEP@h
+	mtspr	SPRN_HID0, r5
+	isync
+
+	mfmsr	r5
+	oris	r5, r5, MSR_POW@h
+
+	/* Enable the flash mapping at the appropriate address.  This
+	 * mapping will override the RAM mapping if booting low, so there's
+	 * no need to disable the latter.  This must be done inside the same
+	 * cache line as setting MSR_POW, so that no instruction fetches
+	 * from RAM happen after the flash mapping is turned on.
+	 */
+
+	.align	5
+	stw	r7, 0x0024(r8)
+	sync
+	isync
+	mtmsr	r5
+	isync
+1:	b	1b
+
+mpc83xx_deep_resume:
+	lis	r4, 1f@h
+	ori	r4, r4, 1f@l
+	tophys(r4, r4)
+	mtsrr0	r4
+
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~(MSR_IR | MSR_DR)
+	mtsrr1	r4
+
+	rfi
+
+1:	tlbia
+	bl	__inval_enable_L1
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+	tophys(r3, r3)
+
+	lwz	r5, SS_MEMSAVE+0(r3)
+	lwz	r6, SS_MEMSAVE+4(r3)
+
+	stw	r5, 0(0)
+	stw	r6, 4(0)
+
+	lwz	r5, SS_HID+0(r3)
+	lwz	r6, SS_HID+4(r3)
+	lwz	r7, SS_HID+8(r3)
+
+	mtspr	SPRN_HID0, r5
+	mtspr	SPRN_HID1, r6
+	mtspr	SPRN_HID2, r7
+
+	lwz	r4, SS_IABR+0(r3)
+	lwz	r5, SS_IABR+4(r3)
+	lwz	r6, SS_IBCR(r3)
+	lwz	r7, SS_DABR+0(r3)
+	lwz	r8, SS_DABR+4(r3)
+	lwz	r9, SS_DBCR(r3)
+
+	mtspr	SPRN_IABR, r4
+	mtspr	SPRN_IABR2, r5
+	mtspr	SPRN_IBCR, r6
+	mtspr	SPRN_DABR, r7
+	mtspr	SPRN_DABR2, r8
+	mtspr	SPRN_DBCR, r9
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	lwzu	r5, 4(r6)
+	mtsrin	r5, r4
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	lwz	r4, SS_DBAT+0x00(r3)
+	lwz	r5, SS_DBAT+0x04(r3)
+	lwz	r6, SS_DBAT+0x08(r3)
+	lwz	r7, SS_DBAT+0x0c(r3)
+
+	mtspr	SPRN_DBAT0U, r4
+	mtspr	SPRN_DBAT0L, r5
+	mtspr	SPRN_DBAT1U, r6
+	mtspr	SPRN_DBAT1L, r7
+
+	lwz	r4, SS_DBAT+0x10(r3)
+	lwz	r5, SS_DBAT+0x14(r3)
+	lwz	r6, SS_DBAT+0x18(r3)
+	lwz	r7, SS_DBAT+0x1c(r3)
+
+	mtspr	SPRN_DBAT2U, r4
+	mtspr	SPRN_DBAT2L, r5
+	mtspr	SPRN_DBAT3U, r6
+	mtspr	SPRN_DBAT3L, r7
+
+	lwz	r4, SS_DBAT+0x20(r3)
+	lwz	r5, SS_DBAT+0x24(r3)
+	lwz	r6, SS_DBAT+0x28(r3)
+	lwz	r7, SS_DBAT+0x2c(r3)
+
+	mtspr	SPRN_DBAT4U, r4
+	mtspr	SPRN_DBAT4L, r5
+	mtspr	SPRN_DBAT5U, r6
+	mtspr	SPRN_DBAT5L, r7
+
+	lwz	r4, SS_DBAT+0x30(r3)
+	lwz	r5, SS_DBAT+0x34(r3)
+	lwz	r6, SS_DBAT+0x38(r3)
+	lwz	r7, SS_DBAT+0x3c(r3)
+
+	mtspr	SPRN_DBAT6U, r4
+	mtspr	SPRN_DBAT6L, r5
+	mtspr	SPRN_DBAT7U, r6
+	mtspr	SPRN_DBAT7L, r7
+
+	lwz	r4, SS_IBAT+0x00(r3)
+	lwz	r5, SS_IBAT+0x04(r3)
+	lwz	r6, SS_IBAT+0x08(r3)
+	lwz	r7, SS_IBAT+0x0c(r3)
+
+	mtspr	SPRN_IBAT0U, r4
+	mtspr	SPRN_IBAT0L, r5
+	mtspr	SPRN_IBAT1U, r6
+	mtspr	SPRN_IBAT1L, r7
+
+	lwz	r4, SS_IBAT+0x10(r3)
+	lwz	r5, SS_IBAT+0x14(r3)
+	lwz	r6, SS_IBAT+0x18(r3)
+	lwz	r7, SS_IBAT+0x1c(r3)
+
+	mtspr	SPRN_IBAT2U, r4
+	mtspr	SPRN_IBAT2L, r5
+	mtspr	SPRN_IBAT3U, r6
+	mtspr	SPRN_IBAT3L, r7
+
+	lwz	r4, SS_IBAT+0x20(r3)
+	lwz	r5, SS_IBAT+0x24(r3)
+	lwz	r6, SS_IBAT+0x28(r3)
+	lwz	r7, SS_IBAT+0x2c(r3)
+
+	mtspr	SPRN_IBAT4U, r4
+	mtspr	SPRN_IBAT4L, r5
+	mtspr	SPRN_IBAT5U, r6
+	mtspr	SPRN_IBAT5L, r7
+
+	lwz	r4, SS_IBAT+0x30(r3)
+	lwz	r5, SS_IBAT+0x34(r3)
+	lwz	r6, SS_IBAT+0x38(r3)
+	lwz	r7, SS_IBAT+0x3c(r3)
+
+	mtspr	SPRN_IBAT6U, r4
+	mtspr	SPRN_IBAT6L, r5
+	mtspr	SPRN_IBAT7U, r6
+	mtspr	SPRN_IBAT7L, r7
+
+	lwz	r4, SS_SPRG+0(r3)
+	lwz	r5, SS_SPRG+4(r3)
+	lwz	r6, SS_SPRG+8(r3)
+	lwz	r7, SS_SPRG+12(r3)
+	lwz	r8, SS_SDR1(r3)
+
+	mtspr	SPRN_SPRG0, r4
+	mtspr	SPRN_SPRG1, r5
+	mtspr	SPRN_SPRG2, r6
+	mtspr	SPRN_SPRG3, r7
+	mtsdr1	r8
+
+	lwz	r4, SS_MSR(r3)
+	lwz	r5, SS_LR(r3)
+	lwz	r6, SS_CR(r3)
+	lwz	r1, SS_SP(r3)
+	lwz	r2, SS_R2(r3)
+
+	mtsrr1	r4
+	mtsrr0	r5
+	mtcr	r6
+
+	li	r4, 0
+	mtspr	SPRN_TBWL, r4
+
+	lwz	r4, SS_TB+0(r3)
+	lwz	r5, SS_TB+4(r3)
+
+	mtspr	SPRN_TBWU, r4
+	mtspr	SPRN_TBWL, r5
+
+	lmw	r12, SS_GPREG(r3)
+
+	/* Kick decrementer */
+	li	r0, 1
+	mtdec	r0
+
+	rfi
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
new file mode 100644
index 00000000000..08e65fc8b98
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -0,0 +1,388 @@
+/*
+ * MPC83xx suspend support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/suspend.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc6xx.h>
+
+#include <sysdev/fsl_soc.h>
+
+#define PMCCR1_NEXT_STATE       0x0C /* Next state for power management */
+#define PMCCR1_NEXT_STATE_SHIFT 2
+#define PMCCR1_CURR_STATE       0x03 /* Current state for power management*/
+#define IMMR_RCW_OFFSET         0x900
+#define RCW_PCI_HOST            0x80000000
+
+void mpc83xx_enter_deep_sleep(phys_addr_t immrbase);
+
+struct mpc83xx_pmc {
+	u32 config;
+#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
+#define PMCCR_SLPEN 1 /* System low power enable */
+
+	u32 event;
+	u32 mask;
+/* All but PMCI are deep-sleep only */
+#define PMCER_GPIO   0x100
+#define PMCER_PCI    0x080
+#define PMCER_USB    0x040
+#define PMCER_ETSEC1 0x020
+#define PMCER_ETSEC2 0x010
+#define PMCER_TIMER  0x008
+#define PMCER_INT1   0x004
+#define PMCER_INT2   0x002
+#define PMCER_PMCI   0x001
+#define PMCER_ALL    0x1FF
+
+	/* deep-sleep only */
+	u32 config1;
+#define PMCCR1_USE_STATE  0x80000000
+#define PMCCR1_PME_EN     0x00000080
+#define PMCCR1_ASSERT_PME 0x00000040
+#define PMCCR1_POWER_OFF  0x00000020
+
+	/* deep-sleep only */
+	u32 config2;
+};
+
+struct mpc83xx_rcw {
+	u32 rcwlr;
+	u32 rcwhr;
+};
+
+struct mpc83xx_clock {
+	u32 spmr;
+	u32 occr;
+	u32 sccr;
+};
+
+struct pmc_type {
+	int has_deep_sleep;
+};
+
+static struct of_device *pmc_dev;
+static int has_deep_sleep, deep_sleeping;
+static int pmc_irq;
+static struct mpc83xx_pmc __iomem *pmc_regs;
+static struct mpc83xx_clock __iomem *clock_regs;
+static int is_pci_agent, wake_from_pci;
+static phys_addr_t immrbase;
+static int pci_pm_state;
+static DECLARE_WAIT_QUEUE_HEAD(agent_wq);
+
+int fsl_deep_sleep(void)
+{
+	return deep_sleeping;
+}
+
+static int mpc83xx_change_state(void)
+{
+	u32 curr_state;
+	u32 reg_cfg1 = in_be32(&pmc_regs->config1);
+
+	if (is_pci_agent) {
+		pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >>
+		               PMCCR1_NEXT_STATE_SHIFT;
+		curr_state = reg_cfg1 & PMCCR1_CURR_STATE;
+
+		if (curr_state != pci_pm_state) {
+			reg_cfg1 &= ~PMCCR1_CURR_STATE;
+			reg_cfg1 |= pci_pm_state;
+			out_be32(&pmc_regs->config1, reg_cfg1);
+
+			wake_up(&agent_wq);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
+{
+	u32 event = in_be32(&pmc_regs->event);
+	int ret = IRQ_NONE;
+
+	if (mpc83xx_change_state())
+		ret = IRQ_HANDLED;
+
+	if (event) {
+		out_be32(&pmc_regs->event, event);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int mpc83xx_suspend_enter(suspend_state_t state)
+{
+	int ret = -EAGAIN;
+
+	/* Don't go to sleep if there's a race where pci_pm_state changes
+	 * between the agent thread checking it and the PM code disabling
+	 * interrupts.
+	 */
+	if (wake_from_pci) {
+		if (pci_pm_state != (deep_sleeping ? 3 : 2))
+			goto out;
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_PME_EN);
+	}
+
+	/* Put the system into low-power mode and the RAM
+	 * into self-refresh mode once the core goes to
+	 * sleep.
+	 */
+
+	out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN);
+
+	/* If it has deep sleep (i.e. it's an 831x or compatible),
+	 * disable power to the core upon entering sleep mode.  This will
+	 * require going through the boot firmware upon a wakeup event.
+	 */
+
+	if (deep_sleeping) {
+		out_be32(&pmc_regs->mask, PMCER_ALL);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF);
+
+		enable_kernel_fp();
+
+		mpc83xx_enter_deep_sleep(immrbase);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
+
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+	} else {
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+		mpc6xx_enter_standby();
+	}
+
+	ret = 0;
+
+out:
+	out_be32(&pmc_regs->config1,
+	         in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN);
+
+	return ret;
+}
+
+static void mpc83xx_suspend_finish(void)
+{
+	deep_sleeping = 0;
+}
+
+static int mpc83xx_suspend_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM;
+}
+
+static int mpc83xx_suspend_begin(suspend_state_t state)
+{
+	switch (state) {
+		case PM_SUSPEND_STANDBY:
+			deep_sleeping = 0;
+			return 0;
+
+		case PM_SUSPEND_MEM:
+			if (has_deep_sleep)
+				deep_sleeping = 1;
+
+			return 0;
+
+		default:
+			return -EINVAL;
+	}
+}
+
+static int agent_thread_fn(void *data)
+{
+	while (1) {
+		wait_event_interruptible(agent_wq, pci_pm_state >= 2);
+		try_to_freeze();
+
+		if (signal_pending(current) || pci_pm_state < 2)
+			continue;
+
+		/* With a preemptible kernel (or SMP), this could race with
+		 * a userspace-driven suspend request.  It's probably best
+		 * to avoid mixing the two with such a configuration (or
+		 * else fix it by adding a mutex to state_store that we can
+		 * synchronize with).
+		 */
+
+		wake_from_pci = 1;
+
+		pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM :
+		                               PM_SUSPEND_STANDBY);
+
+		wake_from_pci = 0;
+	}
+
+	return 0;
+}
+
+static void mpc83xx_set_agent(void)
+{
+	out_be32(&pmc_regs->config1, PMCCR1_USE_STATE);
+	out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+	kthread_run(agent_thread_fn, NULL, "PCI power mgt");
+}
+
+static int mpc83xx_is_pci_agent(void)
+{
+	struct mpc83xx_rcw __iomem *rcw_regs;
+	int ret;
+
+	rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET,
+	                   sizeof(struct mpc83xx_rcw));
+
+	if (!rcw_regs)
+		return -ENOMEM;
+
+	ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST);
+
+	iounmap(rcw_regs);
+	return ret;
+}
+
+static struct platform_suspend_ops mpc83xx_suspend_ops = {
+	.valid = mpc83xx_suspend_valid,
+	.begin = mpc83xx_suspend_begin,
+	.enter = mpc83xx_suspend_enter,
+	.finish = mpc83xx_suspend_finish,
+};
+
+static int pmc_probe(struct of_device *ofdev,
+                     const struct of_device_id *match)
+{
+	struct device_node *np = ofdev->node;
+	struct resource res;
+	struct pmc_type *type = match->data;
+	int ret = 0;
+
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	has_deep_sleep = type->has_deep_sleep;
+	immrbase = get_immrbase();
+	pmc_dev = ofdev;
+
+	is_pci_agent = mpc83xx_is_pci_agent();
+	if (is_pci_agent < 0)
+		return is_pci_agent;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return -ENODEV;
+
+	pmc_irq = irq_of_parse_and_map(np, 0);
+	if (pmc_irq != NO_IRQ) {
+		ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
+		                  "pmc", ofdev);
+
+		if (ret)
+			return -EBUSY;
+	}
+
+	pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!pmc_regs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		ret = -ENODEV;
+		goto out_pmc;
+	}
+
+	clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!clock_regs) {
+		ret = -ENOMEM;
+		goto out_pmc;
+	}
+
+	if (is_pci_agent)
+		mpc83xx_set_agent();
+
+	suspend_set_ops(&mpc83xx_suspend_ops);
+	return 0;
+
+out_pmc:
+	iounmap(pmc_regs);
+out:
+	if (pmc_irq != NO_IRQ)
+		free_irq(pmc_irq, ofdev);
+
+	return ret;
+}
+
+static int pmc_remove(struct of_device *ofdev)
+{
+	return -EPERM;
+};
+
+static struct pmc_type pmc_types[] = {
+	{
+		.has_deep_sleep = 1,
+	},
+	{
+		.has_deep_sleep = 0,
+	}
+};
+
+static struct of_device_id pmc_match[] = {
+	{
+		.compatible = "fsl,mpc8313-pmc",
+		.data = &pmc_types[0],
+	},
+	{
+		.compatible = "fsl,mpc8349-pmc",
+		.data = &pmc_types[1],
+	},
+	{}
+};
+
+static struct of_platform_driver pmc_driver = {
+	.name = "mpc83xx-pmc",
+	.match_table = pmc_match,
+	.probe = pmc_probe,
+	.remove = pmc_remove
+};
+
+static int pmc_init(void)
+{
+	return of_register_platform_driver(&pmc_driver);
+}
+
+module_init(pmc_init);
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 64bcf0a33c7..cc99c280aad 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -137,15 +137,21 @@ int mpc831x_usb_cfg(void)
 
 	/* Configure pin mux for ULPI.  There is no pin mux for UTMI */
 	if (prop && !strcmp(prop, "ulpi")) {
-		temp = in_be32(immap + MPC83XX_SICRL_OFFS);
-		temp &= ~MPC831X_SICRL_USB_MASK;
-		temp |= MPC831X_SICRL_USB_ULPI;
-		out_be32(immap + MPC83XX_SICRL_OFFS, temp);
-
-		temp = in_be32(immap + MPC83XX_SICRH_OFFS);
-		temp &= ~MPC831X_SICRH_USB_MASK;
-		temp |= MPC831X_SICRH_USB_ULPI;
-		out_be32(immap + MPC83XX_SICRH_OFFS, temp);
+		if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC8315_SICRL_USB_MASK,
+					MPC8315_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC8315_SICRH_USB_MASK,
+					MPC8315_SICRH_USB_ULPI);
+		} else {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC831X_SICRL_USB_MASK,
+					MPC831X_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC831X_SICRH_USB_MASK,
+					MPC831X_SICRH_USB_ULPI);
+		}
 	}
 
 	iounmap(immap);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index cebea5cadbc..291675b0097 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -2,8 +2,8 @@ menuconfig MPC85xx
 	bool "Machine Type"
 	depends on PPC_85xx
 	select PPC_UDBG_16550
-	select PPC_INDIRECT_PCI if PCI
 	select MPIC
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y
@@ -86,7 +86,6 @@ config TQM8548
 	help
 	  This option enables support for the TQ Components TQM8548 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 
 config TQM8555
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 2145adeb220..8a3b117b6ce 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
+	{ .type = "simple-bus", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 6b846aa1ced..1bf5aefdfeb 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void)
 static struct of_device_id __initdata mpc8536_ds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index ba498d6f2d0..d17807a6b89 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 25f41cd2d33..483b65cbaba 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -115,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void)
 
 #ifdef CONFIG_PCI
 static int primary_phb_addr;
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
@@ -161,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void)
 		}
 	}
 
-	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
@@ -188,6 +186,7 @@ static int __init mpc8544_ds_probe(void)
 static struct of_device_id __initdata mpc85xxds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 43a459f63e3..2494c515591 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups);
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 2c580cd24e4..6509ade7166 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 80a81e02bb5..9355a526943 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -27,6 +27,7 @@ config SBC8641D
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
+	select FSL_ULI1575
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
@@ -34,6 +35,7 @@ endif
 
 config MPC8641
 	bool
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
@@ -41,6 +43,7 @@ config MPC8641
 
 config MPC8610
 	bool
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 30725302884..5eedb710896 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -58,93 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-#ifdef CONFIG_PCI
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-	u32 temp32;
-
-	/* Disable INTx */
-	pci_read_config_dword(dev, 0x48, &temp32);
-	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
-
-	/* Enable sideband interrupt */
-	pci_read_config_dword(dev, 0x90, &temp32);
-	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
-	unsigned char c;
-	unsigned short temp;
-
-	/* Interrupt Disable, Needed when SATA disabled */
-	pci_read_config_word(dev, PCI_COMMAND, &temp);
-	temp |= 1<<10;
-	pci_write_config_word(dev, PCI_COMMAND, temp);
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c |= 0x80;
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
-	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0x83, c);
-}
-
-/*
- * Since 8259PIC was disabled on the board, the IDE device can not
- * use the legacy IRQ, we need to let the IDE device work under
- * native mode and use the interrupt line like other PCI devices.
- * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
- * as the interrupt for IDE device.
- */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-	unsigned char c;
-
-	pci_read_config_byte(dev, 0x4b, &c);
-	c |= 0x10;
-	pci_write_config_byte(dev, 0x4b, c);
-}
-
-/*
- * SATA interrupt pin bug fix
- * There's a chip bug for 5288, The interrupt pin should be 2,
- * not the read only value 1, So it use INTB#, not INTA# which
- * actually used by the IDE device 5229.
- * As of this bug, during the PCI initialization, 5288 read the
- * irq of IDE device from the device tree, this function fix this
- * bug by re-assigning a correct irq to 5288.
- *
- */
-static void __devinit final_uli5288(struct pci_dev *dev)
-{
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	struct device_node *hosenode = hose ? hose->dn : NULL;
-	struct of_irq oirq;
-	int virq, pin = 2;
-	u32 laddr[3];
-
-	if (!hosenode)
-		return;
-
-	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
-	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-	dev->irq = virq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
-#endif /* CONFIG_PCI */
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 static u32 get_busfreq(void)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 7916599c912..f712d9c0991 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -45,7 +45,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
@@ -87,7 +86,6 @@ mpc86xx_hpcn_setup_arch(void)
 			fsl_add_bridge(np, 0);
 	}
 
-	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 
 #endif
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index 835f2dc24dc..014e26cda08 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -19,7 +19,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/pci-bridge.h>
-#include <asm-powerpc/mpic.h>
+#include <asm/mpic.h>
 #include <asm/mpc86xx.h>
 #include <asm/cacheflush.h>
 
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e51e4..71d7562e190 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@ config 8xx_COPYBACK
 
 	  If in doubt, say Y here.
 
+config 8xx_GPIO
+	bool "GPIO API Support"
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Saying Y here will cause the ports on an MPC8xx processor to be used
+	  with the GPIO API.  If you say N here, the kernel needs less memory.
+
+	  If in doubt, say Y here.
+
 config 8xx_CPU6
 	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
 	help
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 690c1f46e69..4c900efa164 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -253,17 +253,15 @@ config CPM2
 	depends on MPC85xx || 8260
 	select CPM
 	select PPC_LIB_RHEAP
+	select PPC_PCI_CHOICE
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
 	  you wish to build a kernel for a machine with a CPM2 coprocessor
 	  on it (826x, 827x, 8560).
 
-config PPC_CPM_NEW_BINDING
-	bool
-	depends on CPM1 || CPM2
-	default y
-
 config AXON_RAM
 	tristate "Axon DDR2 memory device driver"
 	depends on PPC_IBM_CELL_BLADE
@@ -285,6 +283,7 @@ config FSL_ULI1575
 
 config CPM
 	bool
+	select PPC_CLOCK
 
 config OF_RTC
 	bool
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 5bc4b611ff8..7f651273386 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -42,12 +42,14 @@ config 40x
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config E200
 	bool "Freescale e200"
@@ -84,9 +86,6 @@ config TUNE_CELL
 	  machines. When building a kernel that is supposed to run only
 	  on Cell, you should also select the POWER4_ONLY option.
 
-config 6xx
-	bool
-
 # this is temp to handle compat with arch=ppc
 config 8xx
 	bool
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 423a0234dc3..8079e0b4fd6 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,13 +1,7 @@
 
 obj-$(CONFIG_FSL_ULI1575)	+= fsl_uli1575.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
-else
-ifeq ($(CONFIG_PPC64),y)
-obj-$(CONFIG_PPC_PMAC)		+= powermac/
-endif
-endif
 obj-$(CONFIG_PPC_CHRP)		+= chrp/
 obj-$(CONFIG_40x)		+= 40x/
 obj-$(CONFIG_44x)		+= 44x/
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 3959fcfe731..c14d7d8d96c 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -83,6 +83,22 @@ config CBE_RAS
 	depends on PPC_CELL_NATIVE
 	default y
 
+config PPC_IBM_CELL_RESETBUTTON
+	bool "IBM Cell Blade Pinhole reset button"
+	depends on CBE_RAS && PPC_IBM_CELL_BLADE
+	default y
+	help
+	  Support Pinhole Resetbutton on IBM Cell blades.
+	  This adds a method to trigger system reset via front panel pinhole button.
+
+config PPC_IBM_CELL_POWERBUTTON
+	tristate "IBM Cell Blade power button"
+	depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
+	default y
+	help
+	  Support Powerbutton on IBM Cell blades.
+	  This will enable the powerbutton as an input device.
+
 config CBE_THERM
 	tristate "CBE thermal support"
 	default m
@@ -107,6 +123,15 @@ config CBE_CPUFREQ_PMI
 	  processor will not only be able to run at lower speed,
 	  but also at lower core voltage.
 
+config CBE_CPUFREQ_SPU_GOVERNOR
+	tristate "CBE frequency scaling based on SPU usage"
+	depends on SPU_FS && CPU_FREQ
+	default m
+	help
+	  This governor checks for spu usage to adjust the cpu frequency.
+	  If no spu is running on a given cpu, that cpu will be throttled to
+	  the minimal possible frequency.
+
 endmenu
 
 config OPROFILE_CELL
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index c2a7e4e5ddf..7fd830872c4 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
 obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
 obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
 cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
+obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
+
+obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
 
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_CELL_NATIVE)		+= smp.o
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 69288f65314..3233fe84d15 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
 	struct cpufreq_frequency_table *cbe_freqs;
 	u8 node;
 
+	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+	 * and CPUFREQ_NOTIFY policy events?)
+	 */
+	if (event == CPUFREQ_START)
+		return 0;
+
 	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
 	node = cbe_cpu_to_node(policy->cpu);
 
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
new file mode 100644
index 00000000000..dcddaa5fcb6
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -0,0 +1,117 @@
+/*
+ * driver for powerbutton on IBM cell blades
+ *
+ * (C) Copyright IBM Corp. 2005-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <asm/pmi.h>
+#include <asm/prom.h>
+
+static struct input_dev *button_dev;
+static struct platform_device *button_pdev;
+
+static void cbe_powerbutton_handle_pmi(pmi_message_t pmi_msg)
+{
+	BUG_ON(pmi_msg.type != PMI_TYPE_POWER_BUTTON);
+
+	input_report_key(button_dev, KEY_POWER, 1);
+	input_sync(button_dev);
+	input_report_key(button_dev, KEY_POWER, 0);
+	input_sync(button_dev);
+}
+
+static struct pmi_handler cbe_pmi_handler = {
+	.type			= PMI_TYPE_POWER_BUTTON,
+	.handle_pmi_message	= cbe_powerbutton_handle_pmi,
+};
+
+static int __init cbe_powerbutton_init(void)
+{
+	int ret = 0;
+	struct input_dev *dev;
+
+	if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+		printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	dev = input_allocate_device();
+	if (!dev) {
+		ret = -ENOMEM;
+		printk(KERN_ERR "%s: Not enough memory.\n", __func__);
+		goto out;
+	}
+
+	set_bit(EV_KEY, dev->evbit);
+	set_bit(KEY_POWER, dev->keybit);
+
+	dev->name = "Power Button";
+	dev->id.bustype = BUS_HOST;
+
+	/* this makes the button look like an acpi power button
+	 * no clue whether anyone relies on that though */
+	dev->id.product = 0x02;
+	dev->phys = "LNXPWRBN/button/input0";
+
+	button_pdev = platform_device_register_simple("power_button", 0, NULL, 0);
+	if (IS_ERR(button_pdev)) {
+		ret = PTR_ERR(button_pdev);
+		goto out_free_input;
+	}
+
+	dev->dev.parent = &button_pdev->dev;
+	ret = input_register_device(dev);
+	if (ret) {
+		printk(KERN_ERR "%s: Failed to register device\n", __func__);
+		goto out_free_pdev;
+	}
+
+	button_dev = dev;
+
+	ret = pmi_register_handler(&cbe_pmi_handler);
+	if (ret) {
+		printk(KERN_ERR "%s: Failed to register with pmi.\n", __func__);
+		goto out_free_pdev;
+	}
+
+	goto out;
+
+out_free_pdev:
+	platform_device_unregister(button_pdev);
+out_free_input:
+	input_free_device(dev);
+out:
+	return ret;
+}
+
+static void __exit cbe_powerbutton_exit(void)
+{
+	pmi_unregister_handler(&cbe_pmi_handler);
+	platform_device_unregister(button_pdev);
+	input_free_device(button_dev);
+}
+
+module_init(cbe_powerbutton_init);
+module_exit(cbe_powerbutton_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 4852bf312d8..4d4c8c16912 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -97,7 +97,8 @@ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iom
 	return value.spe[spu->spe_id];
 }
 
-static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr,
+			char *buf)
 {
 	u8 value;
 	struct cbe_pmd_regs __iomem *pmd_regs;
@@ -146,32 +147,38 @@ static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char
 	return size;
 }
 
-static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 0);
 }
 
-static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 8);
 }
 
-static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 16);
 }
 
-static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
 }
 
-static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
 }
 
-static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
 }
@@ -192,43 +199,51 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
 
 /* shows the temperature of the DTS on the PPE,
  * located near the linear thermal sensor */
-static ssize_t ppe_show_temp0(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp0(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return ppe_show_temp(sysdev, buf, 32);
 }
 
 /* shows the temperature of the second DTS on the PPE */
-static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp1(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return ppe_show_temp(sysdev, buf, 0);
 }
 
-static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
 }
 
-static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
 }
 
-static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
 }
 
-static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
 }
 
-static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
 }
 
-static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
 }
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 0e04f8fb152..3e7e0f1568e 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data)
 
 	dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(bus->phb->parent, dummy_page_da)) {
 		pr_err("PCIEX:Map dummy page failed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
new file mode 100644
index 00000000000..a3c6c01bd6d
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -0,0 +1,184 @@
+/*
+ * spu aware cpufreq governor for the cell processor
+ *
+ * © Copyright IBM Corporation 2006-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <asm/atomic.h>
+#include <asm/machdep.h>
+#include <asm/spu.h>
+
+#define POLL_TIME	100000		/* in µs */
+#define EXP		753		/* exp(-1) in fixed-point */
+
+struct spu_gov_info_struct {
+	unsigned long busy_spus;	/* fixed-point */
+	struct cpufreq_policy *policy;
+	struct delayed_work work;
+	unsigned int poll_int;		/* µs */
+};
+static DEFINE_PER_CPU(struct spu_gov_info_struct, spu_gov_info);
+
+static struct workqueue_struct *kspugov_wq;
+
+static int calc_freq(struct spu_gov_info_struct *info)
+{
+	int cpu;
+	int busy_spus;
+
+	cpu = info->policy->cpu;
+	busy_spus = atomic_read(&cbe_spu_info[cpu_to_node(cpu)].busy_spus);
+
+	CALC_LOAD(info->busy_spus, EXP, busy_spus * FIXED_1);
+	pr_debug("cpu %d: busy_spus=%d, info->busy_spus=%ld\n",
+			cpu, busy_spus, info->busy_spus);
+
+	return info->policy->max * info->busy_spus / FIXED_1;
+}
+
+static void spu_gov_work(struct work_struct *work)
+{
+	struct spu_gov_info_struct *info;
+	int delay;
+	unsigned long target_freq;
+
+	info = container_of(work, struct spu_gov_info_struct, work.work);
+
+	/* after cancel_delayed_work_sync we unset info->policy */
+	BUG_ON(info->policy == NULL);
+
+	target_freq = calc_freq(info);
+	__cpufreq_driver_target(info->policy, target_freq, CPUFREQ_RELATION_H);
+
+	delay = usecs_to_jiffies(info->poll_int);
+	queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_init_work(struct spu_gov_info_struct *info)
+{
+	int delay = usecs_to_jiffies(info->poll_int);
+	INIT_DELAYED_WORK_DEFERRABLE(&info->work, spu_gov_work);
+	queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_cancel_work(struct spu_gov_info_struct *info)
+{
+	cancel_delayed_work_sync(&info->work);
+}
+
+static int spu_gov_govern(struct cpufreq_policy *policy, unsigned int event)
+{
+	unsigned int cpu = policy->cpu;
+	struct spu_gov_info_struct *info, *affected_info;
+	int i;
+	int ret = 0;
+
+	info = &per_cpu(spu_gov_info, cpu);
+
+	switch (event) {
+	case CPUFREQ_GOV_START:
+		if (!cpu_online(cpu)) {
+			printk(KERN_ERR "cpu %d is not online\n", cpu);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (!policy->cur) {
+			printk(KERN_ERR "no cpu specified in policy\n");
+			ret = -EINVAL;
+			break;
+		}
+
+		/* initialize spu_gov_info for all affected cpus */
+		for_each_cpu_mask(i, policy->cpus) {
+			affected_info = &per_cpu(spu_gov_info, i);
+			affected_info->policy = policy;
+		}
+
+		info->poll_int = POLL_TIME;
+
+		/* setup timer */
+		spu_gov_init_work(info);
+
+		break;
+
+	case CPUFREQ_GOV_STOP:
+		/* cancel timer */
+		spu_gov_cancel_work(info);
+
+		/* clean spu_gov_info for all affected cpus */
+		for_each_cpu_mask (i, policy->cpus) {
+			info = &per_cpu(spu_gov_info, i);
+			info->policy = NULL;
+		}
+
+		break;
+	}
+
+	return ret;
+}
+
+static struct cpufreq_governor spu_governor = {
+	.name = "spudemand",
+	.governor = spu_gov_govern,
+	.owner = THIS_MODULE,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init spu_gov_init(void)
+{
+	int ret;
+
+	kspugov_wq = create_workqueue("kspugov");
+	if (!kspugov_wq) {
+		printk(KERN_ERR "creation of kspugov failed\n");
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = cpufreq_register_governor(&spu_governor);
+	if (ret) {
+		printk(KERN_ERR "registration of governor failed\n");
+		destroy_workqueue(kspugov_wq);
+		goto out;
+	}
+out:
+	return ret;
+}
+
+static void __exit spu_gov_exit(void)
+{
+	cpufreq_unregister_governor(&spu_governor);
+	destroy_workqueue(kspugov_wq);
+}
+
+
+module_init(spu_gov_init);
+module_exit(spu_gov_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index eeacb3a52ca..e06420af5fe 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -172,8 +172,9 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
 	}
 }
 
-static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
-		unsigned long uaddr, enum dma_data_direction direction)
+static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
+		unsigned long uaddr, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	int i;
 	unsigned long *io_pte, base_pte;
@@ -198,6 +199,8 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
 		(window->ioid & IOPTE_IOID_Mask);
 #endif
+	if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)))
+		base_pte &= ~IOPTE_SO_RW;
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
@@ -210,6 +213,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 
 	pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
 		 index, npages, direction, base_pte);
+	return 0;
 }
 
 static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
@@ -519,7 +523,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 
 	__set_bit(0, window->table.it_map);
 	tce_build_cell(&window->table, window->table.it_offset, 1,
-		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
+		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL);
 	window->table.it_hint = window->table.it_blocksize;
 
 	return window;
@@ -538,7 +542,9 @@ static struct cbe_iommu *cell_iommu_for_node(int nid)
 static unsigned long cell_dma_direct_offset;
 
 static unsigned long dma_iommu_fixed_base;
-struct dma_mapping_ops dma_iommu_fixed_ops;
+
+/* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
+static int iommu_fixed_is_weak;
 
 static struct iommu_table *cell_get_iommu_table(struct device *dev)
 {
@@ -562,6 +568,98 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
 	return &window->table;
 }
 
+/* A coherent allocation implies strong ordering */
+
+static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_handle, gfp_t flag)
+{
+	if (iommu_fixed_is_weak)
+		return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
+					    size, dma_handle,
+					    device_to_mask(dev), flag,
+					    dev->archdata.numa_node);
+	else
+		return dma_direct_ops.alloc_coherent(dev, size, dma_handle,
+						     flag);
+}
+
+static void dma_fixed_free_coherent(struct device *dev, size_t size,
+				    void *vaddr, dma_addr_t dma_handle)
+{
+	if (iommu_fixed_is_weak)
+		iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr,
+				    dma_handle);
+	else
+		dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static dma_addr_t dma_fixed_map_single(struct device *dev, void *ptr,
+				       size_t size,
+				       enum dma_data_direction direction,
+				       struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		return dma_direct_ops.map_single(dev, ptr, size, direction,
+						 attrs);
+	else
+		return iommu_map_single(dev, cell_get_iommu_table(dev), ptr,
+					size, device_to_mask(dev), direction,
+					attrs);
+}
+
+static void dma_fixed_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				   size_t size,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		dma_direct_ops.unmap_single(dev, dma_addr, size, direction,
+					    attrs);
+	else
+		iommu_unmap_single(cell_get_iommu_table(dev), dma_addr, size,
+				   direction, attrs);
+}
+
+static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg,
+			   int nents, enum dma_data_direction direction,
+			   struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		return dma_direct_ops.map_sg(dev, sg, nents, direction, attrs);
+	else
+		return iommu_map_sg(dev, cell_get_iommu_table(dev), sg, nents,
+				    device_to_mask(dev), direction, attrs);
+}
+
+static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg,
+			       int nents, enum dma_data_direction direction,
+			       struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		dma_direct_ops.unmap_sg(dev, sg, nents, direction, attrs);
+	else
+		iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents, direction,
+			       attrs);
+}
+
+static int dma_fixed_dma_supported(struct device *dev, u64 mask)
+{
+	return mask == DMA_64BIT_MASK;
+}
+
+static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
+
+struct dma_mapping_ops dma_iommu_fixed_ops = {
+	.alloc_coherent = dma_fixed_alloc_coherent,
+	.free_coherent  = dma_fixed_free_coherent,
+	.map_single     = dma_fixed_map_single,
+	.unmap_single   = dma_fixed_unmap_single,
+	.map_sg         = dma_fixed_map_sg,
+	.unmap_sg       = dma_fixed_unmap_sg,
+	.dma_supported  = dma_fixed_dma_supported,
+	.set_dma_mask   = dma_set_mask_and_switch,
+};
+
 static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
@@ -918,9 +1016,16 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 
 	pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
+	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M
 		    | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
 
+	if (iommu_fixed_is_weak)
+		pr_info("IOMMU: Using weak ordering for fixed mapping\n");
+	else {
+		pr_info("IOMMU: Using strong ordering for fixed mapping\n");
+		base_pte |= IOPTE_SO_RW;
+	}
+
 	for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
 		/* Don't touch the dynamic region */
 		ioaddr = uaddr + fbase;
@@ -1036,9 +1141,6 @@ static int __init cell_iommu_fixed_mapping_init(void)
 		cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
 	}
 
-	dma_iommu_fixed_ops = dma_direct_ops;
-	dma_iommu_fixed_ops.set_dma_mask = dma_set_mask_and_switch;
-
 	dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch;
 	set_pci_dma_ops(&dma_iommu_ops);
 
@@ -1049,9 +1151,23 @@ static int iommu_fixed_disabled;
 
 static int __init setup_iommu_fixed(char *str)
 {
+	struct device_node *pciep;
+
 	if (strcmp(str, "off") == 0)
 		iommu_fixed_disabled = 1;
 
+	/* If we can find a pcie-endpoint in the device tree assume that
+	 * we're on a triblade or a CAB so by default the fixed mapping
+	 * should be set to be weakly ordered; but only if the boot
+	 * option WASN'T set for strong ordering
+	 */
+	pciep = of_find_node_by_type(NULL, "pcie-endpoint");
+
+	if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
+		iommu_fixed_is_weak = 1;
+
+	of_node_put(pciep);
+
 	return 1;
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 8a3631ce912..efdacc82957 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -38,8 +38,6 @@
 
 #include "pervasive.h"
 
-static int sysreset_hack;
-
 static void cbe_power_save(void)
 {
 	unsigned long ctrl, thread_switch_control;
@@ -87,9 +85,6 @@ static void cbe_power_save(void)
 
 static int cbe_system_reset_exception(struct pt_regs *regs)
 {
-	int cpu;
-	struct cbe_pmd_regs __iomem *pmd;
-
 	switch (regs->msr & SRR1_WAKEMASK) {
 	case SRR1_WAKEEE:
 		do_IRQ(regs);
@@ -98,19 +93,7 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 		timer_interrupt(regs);
 		break;
 	case SRR1_WAKEMT:
-		/*
-		 * The BMC can inject user triggered system reset exceptions,
-		 * but cannot set the system reset reason in srr1,
-		 * so check an extra register here.
-		 */
-		if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
-			pmd = cbe_get_cpu_pmd_regs(cpu);
-			if (in_be64(&pmd->ras_esc_0) & 0xffff) {
-				out_be64(&pmd->ras_esc_0, 0);
-				return 0;
-			}
-		}
-		break;
+		return cbe_sysreset_hack();
 #ifdef CONFIG_CBE_RAS
 	case SRR1_WAKESYSERR:
 		cbe_system_error_exception(regs);
@@ -134,8 +117,6 @@ void __init cbe_pervasive_init(void)
 	if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
 		return;
 
-	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
-
 	for_each_possible_cpu(cpu) {
 		struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
 		if (!regs)
@@ -144,12 +125,6 @@ void __init cbe_pervasive_init(void)
 		 /* Enable Pause(0) control bit */
 		out_be64(&regs->pmcr, in_be64(&regs->pmcr) |
 					    CBE_PMD_PAUSE_ZERO_CONTROL);
-
-		/* Enable JTAG system-reset hack */
-		if (sysreset_hack)
-			out_be32(&regs->fir_mode_reg,
-				in_be32(&regs->fir_mode_reg) |
-				CBE_PMD_FIR_MODE_M8);
 	}
 
 	ppc_md.power_save = cbe_power_save;
diff --git a/arch/powerpc/platforms/cell/pervasive.h b/arch/powerpc/platforms/cell/pervasive.h
index 7b50947f804..fd4d7b7092b 100644
--- a/arch/powerpc/platforms/cell/pervasive.h
+++ b/arch/powerpc/platforms/cell/pervasive.h
@@ -30,4 +30,13 @@ extern void cbe_system_error_exception(struct pt_regs *regs);
 extern void cbe_maintenance_exception(struct pt_regs *regs);
 extern void cbe_thermal_exception(struct pt_regs *regs);
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+extern int cbe_sysreset_hack(void);
+#else
+static inline int cbe_sysreset_hack(void)
+{
+	return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 #endif
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 505f9b9bdf0..2a14b052abc 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -236,6 +236,52 @@ static struct notifier_block cbe_ptcal_reboot_notifier = {
 	.notifier_call = cbe_ptcal_notify_reboot
 };
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+static int sysreset_hack;
+
+static int __init cbe_sysreset_init(void)
+{
+	struct cbe_pmd_regs __iomem *regs;
+
+	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+	if (!sysreset_hack)
+		return 0;
+
+	regs = cbe_get_cpu_pmd_regs(0);
+	if (!regs)
+		return 0;
+
+	/* Enable JTAG system-reset hack */
+	out_be32(&regs->fir_mode_reg,
+		in_be32(&regs->fir_mode_reg) |
+		CBE_PMD_FIR_MODE_M8);
+
+	return 0;
+}
+device_initcall(cbe_sysreset_init);
+
+int cbe_sysreset_hack(void)
+{
+	struct cbe_pmd_regs __iomem *regs;
+
+	/*
+	 * The BMC can inject user triggered system reset exceptions,
+	 * but cannot set the system reset reason in srr1,
+	 * so check an extra register here.
+	 */
+	if (sysreset_hack && (smp_processor_id() == 0)) {
+		regs = cbe_get_cpu_pmd_regs(0);
+		if (!regs)
+			return 0;
+		if (in_be64(&regs->ras_esc_0) & 0x0000ffff) {
+			out_be64(&regs->ras_esc_0, 0);
+			return 0;
+		}
+	}
+	return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 int __init cbe_ptcal_init(void)
 {
 	int ret;
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index 418b605ac35..5122ec14527 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
 
 	dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(phb->parent, dummy_page_da)) {
 		pr_err("SPIDER-IOWA:Map dummy page filed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 78f905bc6a4..a5bdb89a17c 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -703,7 +703,8 @@ static unsigned long long spu_acct_time(struct spu *spu,
 }
 
 
-static ssize_t spu_stat_show(struct sys_device *sysdev, char *buf)
+static ssize_t spu_stat_show(struct sys_device *sysdev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct spu *spu = container_of(sysdev, struct spu, sysdev);
 
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 99c73066b82..010a51f5979 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -288,9 +288,32 @@ spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	return VM_FAULT_NOPAGE;
 }
 
+static int spufs_mem_mmap_access(struct vm_area_struct *vma,
+				unsigned long address,
+				void *buf, int len, int write)
+{
+	struct spu_context *ctx = vma->vm_file->private_data;
+	unsigned long offset = address - vma->vm_start;
+	char *local_store;
+
+	if (write && !(vma->vm_flags & VM_WRITE))
+		return -EACCES;
+	if (spu_acquire(ctx))
+		return -EINTR;
+	if ((offset + len) > vma->vm_end)
+		len = vma->vm_end - offset;
+	local_store = ctx->ops->get_ls(ctx);
+	if (write)
+		memcpy_toio(local_store + offset, buf, len);
+	else
+		memcpy_fromio(buf, local_store + offset, len);
+	spu_release(ctx);
+	return len;
+}
 
 static struct vm_operations_struct spufs_mem_mmap_vmops = {
 	.fault = spufs_mem_mmap_fault,
+	.access = spufs_mem_mmap_access,
 };
 
 static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 7123472801d..690ca7b0dcf 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -78,7 +78,7 @@ spufs_destroy_inode(struct inode *inode)
 }
 
 static void
-spufs_init_once(struct kmem_cache *cachep, void *p)
+spufs_init_once(void *p)
 {
 	struct spufs_inode_info *ei = p;
 
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index f7edba6cb79..c9bb7cfd3dc 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -206,11 +206,6 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc)
 			(SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
 		if (runcntl == 0)
 			runcntl = SPU_RUNCNTL_RUNNABLE;
-	}
-
-	if (ctx->flags & SPU_CREATE_NOSCHED) {
-		spuctx_switch_state(ctx, SPU_UTIL_USER);
-		ctx->ops->runcntl_write(ctx, runcntl);
 	} else {
 		unsigned long privcntl;
 
@@ -219,9 +214,15 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc)
 		else
 			privcntl = SPU_PRIVCNTL_MODE_NORMAL;
 
-		ctx->ops->npc_write(ctx, *npc);
 		ctx->ops->privcntl_write(ctx, privcntl);
-		ctx->ops->runcntl_write(ctx, runcntl);
+		ctx->ops->npc_write(ctx, *npc);
+	}
+
+	ctx->ops->runcntl_write(ctx, runcntl);
+
+	if (ctx->flags & SPU_CREATE_NOSCHED) {
+		spuctx_switch_state(ctx, SPU_UTIL_USER);
+	} else {
 
 		if (ctx->state == SPU_STATE_SAVED) {
 			ret = spu_activate(ctx, 0);
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 34654743363..67595bc380d 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,11 +312,28 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
 	 */
 	node = cpu_to_node(raw_smp_processor_id());
 	for (n = 0; n < MAX_NUMNODES; n++, node++) {
+		int available_spus;
+
 		node = (node < MAX_NUMNODES) ? node : 0;
 		if (!node_allowed(ctx, node))
 			continue;
+
+		available_spus = 0;
 		mutex_lock(&cbe_spu_info[node].list_mutex);
 		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
+			if (spu->ctx && spu->ctx->gang
+					&& spu->ctx->aff_offset == 0)
+				available_spus -=
+					(spu->ctx->gang->contexts - 1);
+			else
+				available_spus++;
+		}
+		if (available_spus < ctx->gang->contexts) {
+			mutex_unlock(&cbe_spu_info[node].list_mutex);
+			continue;
+		}
+
+		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
 			if ((!mem_aff || spu->has_mem_affinity) &&
 							sched_spu(spu)) {
 				mutex_unlock(&cbe_spu_info[node].list_mutex);
@@ -389,6 +406,9 @@ static int has_affinity(struct spu_context *ctx)
 	if (list_empty(&ctx->aff_list))
 		return 0;
 
+	if (atomic_read(&ctx->gang->aff_sched_count) == 0)
+		ctx->gang->aff_ref_spu = NULL;
+
 	if (!gang->aff_ref_spu) {
 		if (!(gang->aff_flags & AFF_MERGED))
 			aff_merge_remaining_ctxs(gang);
@@ -416,14 +436,8 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
  	if (spu->ctx->flags & SPU_CREATE_NOSCHED)
 		atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
 
-	if (ctx->gang){
-		mutex_lock(&ctx->gang->aff_mutex);
-		if (has_affinity(ctx)) {
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-		}
-		mutex_unlock(&ctx->gang->aff_mutex);
-	}
+	if (ctx->gang)
+		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
 	spu_switch_notify(spu, NULL);
 	spu_unmap_mappings(ctx);
@@ -562,10 +576,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx)
 				goto found;
 			mutex_unlock(&cbe_spu_info[node].list_mutex);
 
-			mutex_lock(&ctx->gang->aff_mutex);
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-			mutex_unlock(&ctx->gang->aff_mutex);
+			atomic_dec(&ctx->gang->aff_sched_count);
 			goto not_found;
 		}
 		mutex_unlock(&ctx->gang->aff_mutex);
@@ -630,9 +641,12 @@ static struct spu *find_victim(struct spu_context *ctx)
 
 			if (tmp && tmp->prio > ctx->prio &&
 			    !(tmp->flags & SPU_CREATE_NOSCHED) &&
-			    (!victim || tmp->prio > victim->prio))
+			    (!victim || tmp->prio > victim->prio)) {
 				victim = spu->ctx;
+			}
 		}
+		if (victim)
+			get_spu_context(victim);
 		mutex_unlock(&cbe_spu_info[node].list_mutex);
 
 		if (victim) {
@@ -647,6 +661,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 			 * look at another context or give up after X retries.
 			 */
 			if (!mutex_trylock(&victim->state_mutex)) {
+				put_spu_context(victim);
 				victim = NULL;
 				goto restart;
 			}
@@ -659,6 +674,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 				 * restart the search.
 				 */
 				mutex_unlock(&victim->state_mutex);
+				put_spu_context(victim);
 				victim = NULL;
 				goto restart;
 			}
@@ -676,6 +692,7 @@ static struct spu *find_victim(struct spu_context *ctx)
 				spu_add_to_rq(victim);
 
 			mutex_unlock(&victim->state_mutex);
+			put_spu_context(victim);
 
 			return spu;
 		}
@@ -711,17 +728,33 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx)
 	/* not a candidate for interruptible because it's called either
 	   from the scheduler thread or from spu_deactivate */
 	mutex_lock(&ctx->state_mutex);
-	__spu_schedule(spu, ctx);
+	if (ctx->state == SPU_STATE_SAVED)
+		__spu_schedule(spu, ctx);
 	spu_release(ctx);
 }
 
-static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unschedule - remove a context from a spu, and possibly release it.
+ * @spu:	The SPU to unschedule from
+ * @ctx:	The context currently scheduled on the SPU
+ * @free_spu	Whether to free the SPU for other contexts
+ *
+ * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
+ * SPU is made available for other contexts (ie, may be returned by
+ * spu_get_idle). If this is zero, the caller is expected to schedule another
+ * context to this spu.
+ *
+ * Should be called with ctx->state_mutex held.
+ */
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
+		int free_spu)
 {
 	int node = spu->node;
 
 	mutex_lock(&cbe_spu_info[node].list_mutex);
 	cbe_spu_info[node].nr_active--;
-	spu->alloc_state = SPU_FREE;
+	if (free_spu)
+		spu->alloc_state = SPU_FREE;
 	spu_unbind_context(spu, ctx);
 	ctx->stats.invol_ctx_switch++;
 	spu->stats.invol_ctx_switch++;
@@ -821,7 +854,7 @@ static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio)
 	if (spu) {
 		new = grab_runnable_context(max_prio, spu->node);
 		if (new || force) {
-			spu_unschedule(spu, ctx);
+			spu_unschedule(spu, ctx, new == NULL);
 			if (new) {
 				if (new->flags & SPU_CREATE_NOSCHED)
 					wake_up(&new->stop_wq);
@@ -894,7 +927,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 
 	new = grab_runnable_context(ctx->prio + 1, spu->node);
 	if (new) {
-		spu_unschedule(spu, ctx);
+		spu_unschedule(spu, ctx, 0);
 		if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 			spu_add_to_rq(ctx);
 	} else {
@@ -974,9 +1007,11 @@ static int spusched_thread(void *unused)
 				struct spu_context *ctx = spu->ctx;
 
 				if (ctx) {
+					get_spu_context(ctx);
 					mutex_unlock(mtx);
 					spusched_tick(ctx);
 					mutex_lock(mtx);
+					put_spu_context(ctx);
 				}
 			}
 			mutex_unlock(mtx);
@@ -1019,7 +1054,7 @@ void spuctx_switch_state(struct spu_context *ctx,
 		node = spu->node;
 		if (old_state == SPU_UTIL_USER)
 			atomic_dec(&cbe_spu_info[node].busy_spus);
-		if (new_state == SPU_UTIL_USER);
+		if (new_state == SPU_UTIL_USER)
 			atomic_inc(&cbe_spu_info[node].busy_spus);
 	}
 }
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 8c0e95766a6..92d20e993ed 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -196,8 +196,7 @@ static int __init sputrace_init(void)
 	struct proc_dir_entry *entry;
 	int i, error = -ENOMEM;
 
-	sputrace_log = kcalloc(sizeof(struct sputrace),
-				bufsize, GFP_KERNEL);
+	sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
 	if (!sputrace_log)
 		goto out;
 
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 609c46db4a1..768c262b936 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -367,7 +367,7 @@ static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
 	viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
 	if (!viaisa)
 		return;
-	printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id);
+	dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
 
 	pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
 	pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index afc9141be63..ef74a0763ec 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = {
 	ULI_8259_NONE,		/* PIRQH */
 };
 
-/* set in board code if you want this quirks to do something */
-int uses_fsl_uli_m1575;
-
 /* Bridge */
 static void __devinit early_uli5249(struct pci_dev *dev)
 {
 	unsigned char temp;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
 	int i;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	/*
@@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
 	 * IRQ 14: Edge
 	 * IRQ 15: Edge
 	 */
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	outb(0xfa, 0x4d0);
@@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
 	unsigned char c;
 	unsigned int d;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	/* read/write lock */
@@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
 	unsigned short temp;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -221,7 +223,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		if ((bus->resource[i]) &&
 			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			dummy = ioremap(bus->resource[i]->start, 0x4);
+			dummy = ioremap(bus->resource[i]->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
@@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
 
+static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
+{
+	u32 temp32;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	/* Disable INTx */
+	pci_read_config_dword(dev, 0x48, &temp32);
+	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+	/* Enable sideband interrupt */
+	pci_read_config_dword(dev, 0x90, &temp32);
+	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+	unsigned short temp;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	/* Interrupt Disable, Needed when SATA disabled */
+	pci_read_config_word(dev, PCI_COMMAND, &temp);
+	temp |= 1<<10;
+	pci_write_config_word(dev, PCI_COMMAND, temp);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c |= 0x80;
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c &= 0x7f;
+	pci_write_config_byte(dev, 0x83, c);
+}
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned char c;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	pci_read_config_byte(dev, 0x4b, &c);
+	c |= 0x10;
+	pci_write_config_byte(dev, 0x4b, c);
+}
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct device_node *hosenode = hose ? hose->dn : NULL;
+	struct of_irq oirq;
+	int virq, pin = 2;
+	u32 laddr[3];
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	if (!hosenode)
+		return;
+
+	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+	laddr[1] = laddr[2] = 0;
+	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+				     oirq.size);
+	dev->irq = virq;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
+
 int uli_exclude_device(struct pci_controller *hose,
 			u_char bus, u_char devfn)
 {
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 761d9e971fc..45ffd8e542f 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -2,19 +2,11 @@ config PPC_ISERIES
 	bool "IBM Legacy iSeries"
 	depends on PPC_MULTIPLATFORM && PPC64
 	select PPC_INDIRECT_IO
+	select PPC_PCI_CHOICE if EMBEDDED
 
 menu "iSeries device drivers"
 	depends on PPC_ISERIES
 
-config VIOCONS
-	bool "iSeries Virtual Console Support (Obsolete)"
-	depends on !HVC_ISERIES
-	default n
-	help
-	  This is the old virtual console driver for legacy iSeries.
-	  You should use the iSeries Hypervisor Virtual Console
-	  support instead.
-
 config VIODASD
 	tristate "iSeries Virtual I/O disk support"
 	help
@@ -37,5 +29,5 @@ endmenu
 
 config VIOPATH
 	bool
-	depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
+	depends on VIODASD || VIOCD || VIOTAPE || ISERIES_VETH
 	default y
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index ab5d8687c3c..bb464d1211b 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -41,8 +41,9 @@
 #include <asm/iseries/hv_call_event.h>
 #include <asm/iseries/iommu.h>
 
-static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
-		unsigned long uaddr, enum dma_data_direction direction)
+static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
+		unsigned long uaddr, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	u64 rc;
 	u64 tce, rpn;
@@ -70,6 +71,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 		index++;
 		uaddr += TCE_PAGE_SIZE;
 	}
+	return 0;
 }
 
 static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 1dc7295746d..731d7b15774 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
 		count = 256 - off;
 
 	dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dma_addr))
+	if (dma_mapping_error(NULL, dma_addr))
 		return -ENOMEM;
 	memset(page, 0, off + count);
 	memset(&vsp_cmd, 0, sizeof(vsp_cmd));
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index b72120751bb..70b688c1aef 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -561,7 +561,7 @@ static void yield_shared_processor(void)
 static void iseries_shared_idle(void)
 {
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched() && !hvlpevent_is_pending()) {
 			local_irq_disable();
 			ppc64_runlatch_off();
@@ -591,7 +591,7 @@ static void iseries_dedicated_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		if (!need_resched()) {
 			while (!need_resched()) {
 				ppc64_runlatch_off();
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 86967bdd877..a0ff03a3d8d 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -83,9 +83,10 @@ static u32 *iob_l2_base;
 static struct iommu_table iommu_table_iobmap;
 static int iommu_table_iobmap_inited;
 
-static void iobmap_build(struct iommu_table *tbl, long index,
+static int iobmap_build(struct iommu_table *tbl, long index,
 			 long npages, unsigned long uaddr,
-			 enum dma_data_direction direction)
+			 enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
 {
 	u32 *ip;
 	u32 rpn;
@@ -107,6 +108,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
 		uaddr += IOBMAP_PAGE_SIZE;
 		bus_addr += IOBMAP_PAGE_SIZE;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 89774177b20..be60d64be7a 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -2,12 +2,12 @@ CFLAGS_bootx_init.o  		+= -fPIC
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg
+CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
 endif
 
 obj-y				+= pic.o setup.o time.o feature.o pci.o \
 				   sleep.o low_i2c.o cache.o pfunc_core.o \
-				   pfunc_base.o
+				   pfunc_base.o udbg_scc.o udbg_adb.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
 obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq_32.o
 obj-$(CONFIG_CPU_FREQ_PMAC64)	+= cpufreq_64.o
@@ -19,4 +19,3 @@ obj-$(CONFIG_NVRAM:m=y)		+= nvram.o
 obj-$(CONFIG_PPC64)		+= nvram.o
 obj-$(CONFIG_PPC32)		+= bootx_init.o
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_PPC_MERGE)		+= udbg_scc.o udbg_adb.o
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 00bd0166d07..88ccf3a08a9 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md;
 int sccdbg;
 #endif
 
-extern void zs_kgdb_hook(int tty_num);
-
 sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
 EXPORT_SYMBOL(sys_ctrler);
 
@@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void)
 	l2cr_init();
 #endif /* CONFIG_PPC32 */
 
-#ifdef CONFIG_KGDB
-	zs_kgdb_hook(0);
-#endif
-
 	find_via_cuda();
 	find_via_pmu();
 	smu_init();
@@ -547,6 +541,78 @@ static int __init pmac_declare_of_platform_devices(void)
 }
 machine_device_initcall(powermac, pmac_declare_of_platform_devices);
 
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers.
+ */
+static int __init check_pmac_serial_console(void)
+{
+	struct device_node *prom_stdout = NULL;
+	int offset = 0;
+	const char *name;
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+	char *devname = "ttyS";
+#else
+	char *devname = "ttyPZ";
+#endif
+
+	pr_debug(" -> check_pmac_serial_console()\n");
+
+	/* The user has requested a console so this is already set up. */
+	if (strstr(boot_command_line, "console=")) {
+		pr_debug(" console was specified !\n");
+		return -EBUSY;
+	}
+
+	if (!of_chosen) {
+		pr_debug(" of_chosen is NULL !\n");
+		return -ENODEV;
+	}
+
+	/* We are getting a weird phandle from OF ... */
+	/* ... So use the full path instead */
+	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name == NULL) {
+		pr_debug(" no linux,stdout-path !\n");
+		return -ENODEV;
+	}
+	prom_stdout = of_find_node_by_path(name);
+	if (!prom_stdout) {
+		pr_debug(" can't find stdout package %s !\n", name);
+		return -ENODEV;
+	}
+	pr_debug("stdout is %s\n", prom_stdout->full_name);
+
+	name = of_get_property(prom_stdout, "name", NULL);
+	if (!name) {
+		pr_debug(" stdout package has no name !\n");
+		goto not_found;
+	}
+
+	if (strcmp(name, "ch-a") == 0)
+		offset = 0;
+	else if (strcmp(name, "ch-b") == 0)
+		offset = 1;
+	else
+		goto not_found;
+	of_node_put(prom_stdout);
+
+	pr_debug("Found serial console at %s%d\n", devname, offset);
+
+	return add_preferred_console(devname, offset, NULL);
+
+ not_found:
+	pr_debug("No preferred console found !\n");
+	of_node_put(prom_stdout);
+	return -ENODEV;
+}
+console_initcall(check_pmac_serial_console);
+
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 47de4d3fc16..572771fd846 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc)
 	out_8(sccc, 0xc0);
 
 	/* If SCC was the OF output port, read the BRG value, else
-	 * Setup for 57600 8N1
+	 * Setup for 38400 or 57600 8N1 depending on the machine
 	 */
 	if (ch_def != NULL) {
 		out_8(sccc, 13);
 		scc_inittab[1] = in_8(sccc);
 		out_8(sccc, 12);
 		scc_inittab[3] = in_8(sccc);
+	} else if (machine_is_compatible("RackMac1,1")
+		   || machine_is_compatible("RackMac1,2")
+		   || machine_is_compatible("MacRISC4")) {
+		/* Xserves and G5s default to 57600 */
+		scc_inittab[1] = 0;
+		scc_inittab[3] = 0;
+	} else {
+		/* Others default to 38400 */
+		scc_inittab[1] = 0;
+		scc_inittab[3] = 1;
 	}
 
 	for (i = 0; i < sizeof(scc_inittab); ++i)
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index a5f4e95dfc3..920cf7a454b 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -8,6 +8,7 @@ config PPC_PS3
 	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select MEMORY_HOTPLUG
+	select PPC_PCI_CHOICE
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.  Enabling this
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 3866debfa3c..ffdd8e963fb 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -486,6 +486,7 @@ static int __init ps3_register_graphics_devices(void)
 		return -ENOMEM;
 
 	p->dev.match_id = PS3_MATCH_ID_GRAPHICS;
+	p->dev.match_sub_id = PS3_MATCH_SUB_ID_FB;
 	p->dev.dev_type = PS3_DEVICE_TYPE_IOC0;
 
 	result = ps3_system_bus_device_register(&p->dev);
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1cf901fa903..6eb1d4d182c 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -29,138 +29,75 @@
 
 #include "platform.h"
 
-#if defined(DEBUG)
-#define DBG udbg_printf
-#else
-#define DBG pr_debug
-#endif
-
-static struct hash_pte *htab;
-static unsigned long htab_addr;
-static unsigned char *bolttab;
-static unsigned char *inusetab;
-
-static DEFINE_SPINLOCK(ps3_bolttab_lock);
-
-#define debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g) \
-	_debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__)
-static void _debug_dump_hpte(unsigned long pa, unsigned long va,
-	unsigned long group, unsigned long bitmap, struct hash_pte lhpte,
-	int psize, unsigned long slot, const char* func, int line)
-{
-	DBG("%s:%d: pa     = %lxh\n", func, line, pa);
-	DBG("%s:%d: lpar   = %lxh\n", func, line,
-		ps3_mm_phys_to_lpar(pa));
-	DBG("%s:%d: va     = %lxh\n", func, line, va);
-	DBG("%s:%d: group  = %lxh\n", func, line, group);
-	DBG("%s:%d: bitmap = %lxh\n", func, line, bitmap);
-	DBG("%s:%d: hpte.v = %lxh\n", func, line, lhpte.v);
-	DBG("%s:%d: hpte.r = %lxh\n", func, line, lhpte.r);
-	DBG("%s:%d: psize  = %xh\n", func, line, psize);
-	DBG("%s:%d: slot   = %lxh\n", func, line, slot);
-}
+/**
+ * enum lpar_vas_id - id of LPAR virtual address space.
+ * @lpar_vas_id_current: Current selected virtual address space
+ *
+ * Identify the target LPAR address space.
+ */
+
+enum ps3_lpar_vas_id {
+	PS3_LPAR_VAS_ID_CURRENT = 0,
+};
+
+
+static DEFINE_SPINLOCK(ps3_htab_lock);
 
 static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va,
 	unsigned long pa, unsigned long rflags, unsigned long vflags,
 	int psize, int ssize)
 {
-	unsigned long slot;
-	struct hash_pte lhpte;
-	int secondary = 0;
-	unsigned long result;
-	unsigned long bitmap;
+	int result;
+	u64 hpte_v, hpte_r;
+	u64 inserted_index;
+	u64 evicted_v, evicted_r;
+	u64 hpte_v_array[4], hpte_rs;
 	unsigned long flags;
-	unsigned long p_pteg, s_pteg, b_index, b_mask, cb, ci;
-
-	vflags &= ~HPTE_V_SECONDARY; /* this bit is ignored */
-
-	lhpte.v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M) |
-		vflags | HPTE_V_VALID;
-	lhpte.r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
-
-	p_pteg = hpte_group / HPTES_PER_GROUP;
-	s_pteg = ~p_pteg & htab_hash_mask;
-
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
-
-	BUG_ON(bolttab[p_pteg] == 0xff && bolttab[s_pteg] == 0xff);
+	long ret = -1;
 
-	bitmap = (inusetab[p_pteg] << 8) | inusetab[s_pteg];
+	/*
+	 * lv1_insert_htab_entry() will search for victim
+	 * entry in both primary and secondary pte group
+	 */
+	vflags &= ~HPTE_V_SECONDARY;
 
-	if (bitmap == 0xffff) {
-		/*
-		 * PTEG is full. Search for victim.
-		 */
-		bitmap &= ~((bolttab[p_pteg] << 8) | bolttab[s_pteg]);
-		do {
-			ci = mftb() & 15;
-			cb = 0x8000UL >> ci;
-		} while ((cb & bitmap) == 0);
-	} else {
-		/*
-		 * search free slot in hardware order
-		 *	[primary]	0, 2, 4, 6, 1, 3, 5, 7
-		 *	[secondary]	0, 2, 4, 6, 1, 3, 5, 7
-		 */
-		for (ci = 0; ci < HPTES_PER_GROUP; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = 1; ci < HPTES_PER_GROUP; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = HPTES_PER_GROUP; ci < HPTES_PER_GROUP*2; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = HPTES_PER_GROUP+1; ci < HPTES_PER_GROUP*2; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-	}
+	hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID;
+	hpte_r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
 
-found:
-	if (ci < HPTES_PER_GROUP) {
-		slot = p_pteg * HPTES_PER_GROUP + ci;
-	} else {
-		slot = s_pteg * HPTES_PER_GROUP + (ci & 7);
-		/* lhpte.dw0.dw0.h = 1; */
-		vflags |= HPTE_V_SECONDARY;
-		lhpte.v |= HPTE_V_SECONDARY;
-	}
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	result = lv1_write_htab_entry(0, slot, lhpte.v, lhpte.r);
+	/* talk hvc to replace entries BOLTED == 0 */
+	result = lv1_insert_htab_entry(PS3_LPAR_VAS_ID_CURRENT, hpte_group,
+				       hpte_v, hpte_r,
+				       HPTE_V_BOLTED, 0,
+				       &inserted_index,
+				       &evicted_v, &evicted_r);
 
 	if (result) {
-		debug_dump_hpte(pa, va, hpte_group, bitmap, lhpte, psize, slot);
+		/* all entries bolted !*/
+		pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%lx r=%lx\n",
+			__func__, result, va, pa, hpte_group, hpte_v, hpte_r);
 		BUG();
 	}
 
 	/*
-	 * If used slot is not in primary HPTE group,
-	 * the slot should be in secondary HPTE group.
+	 * see if the entry is inserted into secondary pteg
 	 */
+	result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT,
+				       inserted_index & ~0x3UL,
+				       &hpte_v_array[0], &hpte_v_array[1],
+				       &hpte_v_array[2], &hpte_v_array[3],
+				       &hpte_rs);
+	BUG_ON(result);
 
-	if ((hpte_group ^ slot) & ~(HPTES_PER_GROUP - 1)) {
-		secondary = 1;
-		b_index = s_pteg;
-	} else {
-		secondary = 0;
-		b_index = p_pteg;
-	}
+	if (hpte_v_array[inserted_index % 4] & HPTE_V_SECONDARY)
+		ret = (inserted_index & 7) | (1 << 3);
+	else
+		ret = inserted_index & 7;
 
-	b_mask = (lhpte.v & HPTE_V_BOLTED) ? 1 << 7 : 0 << 7;
-	bolttab[b_index] |= b_mask >> (slot & 7);
-	b_mask = 1 << 7;
-	inusetab[b_index] |= b_mask >> (slot & 7);
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
 
-	return (slot & 7) | (secondary << 3);
+	return ret;
 }
 
 static long ps3_hpte_remove(unsigned long hpte_group)
@@ -172,39 +109,48 @@ static long ps3_hpte_remove(unsigned long hpte_group)
 static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
 	unsigned long va, int psize, int ssize, int local)
 {
+	int result;
+	u64 hpte_v, want_v, hpte_rs;
+	u64 hpte_v_array[4];
 	unsigned long flags;
-	unsigned long result;
-	unsigned long pteg, bit;
-	unsigned long hpte_v, want_v;
+	long ret;
 
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	want_v = hpte_encode_v(va, psize, ssize);
 
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	hpte_v = htab[slot].v;
-	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
-		spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
-
-		/* ps3_hpte_insert() will be used to update PTE */
-		return -1;
-	}
-
-	result = lv1_write_htab_entry(0, slot, 0, 0);
+	result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT, slot & ~0x3UL,
+				       &hpte_v_array[0], &hpte_v_array[1],
+				       &hpte_v_array[2], &hpte_v_array[3],
+				       &hpte_rs);
 
 	if (result) {
-		DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n",
-		       __func__, va, slot, psize, result, result);
+		pr_info("%s: res=%d read va=%lx slot=%lx psize=%d\n",
+			__func__, result, va, slot, psize);
 		BUG();
 	}
 
-	pteg = slot / HPTES_PER_GROUP;
-	bit = slot % HPTES_PER_GROUP;
-	inusetab[pteg] &= ~(0x80 >> bit);
+	hpte_v = hpte_v_array[slot % 4];
 
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	/*
+	 * As lv1_read_htab_entries() does not give us the RPN, we can
+	 * not synthesize the new hpte_r value here, and therefore can
+	 * not update the hpte with lv1_insert_htab_entry(), so we
+	 * insted invalidate it and ask the caller to update it via
+	 * ps3_hpte_insert() by returning a -1 value.
+	 */
+	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
+		/* not found */
+		ret = -1;
+	} else {
+		/* entry found, just invalidate it */
+		result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT,
+					      slot, 0, 0);
+		ret = -1;
+	}
 
-	/* ps3_hpte_insert() will be used to update PTE */
-	return -1;
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
+	return ret;
 }
 
 static void ps3_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
@@ -217,45 +163,35 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long va,
 	int psize, int ssize, int local)
 {
 	unsigned long flags;
-	unsigned long result;
-	unsigned long pteg, bit;
+	int result;
+
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
-	result = lv1_write_htab_entry(0, slot, 0, 0);
+	result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, slot, 0, 0);
 
 	if (result) {
-		DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n",
-		       __func__, va, slot, psize, result, result);
+		pr_info("%s: res=%d va=%lx slot=%lx psize=%d\n",
+			__func__, result, va, slot, psize);
 		BUG();
 	}
 
-	pteg = slot / HPTES_PER_GROUP;
-	bit = slot % HPTES_PER_GROUP;
-	inusetab[pteg] &= ~(0x80 >> bit);
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
 }
 
 static void ps3_hpte_clear(void)
 {
-	int result;
-
-	DBG(" -> %s:%d\n", __func__, __LINE__);
+	unsigned long hpte_count = (1UL << ppc64_pft_size) >> 4;
+	u64 i;
 
-	result = lv1_unmap_htab(htab_addr);
-	BUG_ON(result);
+	for (i = 0; i < hpte_count; i++)
+		lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, i, 0, 0);
 
 	ps3_mm_shutdown();
 	ps3_mm_vas_destroy();
-
-	DBG(" <- %s:%d\n", __func__, __LINE__);
 }
 
 void __init ps3_hpte_init(unsigned long htab_size)
 {
-	long bitmap_size;
-
-	DBG(" -> %s:%d\n", __func__, __LINE__);
-
 	ppc_md.hpte_invalidate = ps3_hpte_invalidate;
 	ppc_md.hpte_updatepp = ps3_hpte_updatepp;
 	ppc_md.hpte_updateboltedpp = ps3_hpte_updateboltedpp;
@@ -264,28 +200,5 @@ void __init ps3_hpte_init(unsigned long htab_size)
 	ppc_md.hpte_clear_all = ps3_hpte_clear;
 
 	ppc64_pft_size = __ilog2(htab_size);
-
-	bitmap_size = htab_size / sizeof(struct hash_pte) / 8;
-
-	bolttab = __va(lmb_alloc(bitmap_size, 1));
-	inusetab = __va(lmb_alloc(bitmap_size, 1));
-
-	memset(bolttab, 0, bitmap_size);
-	memset(inusetab, 0, bitmap_size);
-
-	DBG(" <- %s:%d\n", __func__, __LINE__);
 }
 
-void __init ps3_map_htab(void)
-{
-	long result;
-	unsigned long htab_size = (1UL << ppc64_pft_size);
-
-	result = lv1_map_htab(0, &htab_addr);
-
-	htab = (__force struct hash_pte *)ioremap_flags(htab_addr, htab_size,
-					    pgprot_val(PAGE_READONLY_X));
-
-	DBG("%s:%d: lpar %016lxh, virt %016lxh\n", __func__, __LINE__,
-		htab_addr, (unsigned long)htab);
-}
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index a413abbd412..77bc330263c 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -201,7 +201,6 @@ static void __init ps3_setup_arch(void)
 	       ps3_firmware_version.rev);
 
 	ps3_spu_set_platform();
-	ps3_map_htab();
 
 #ifdef CONFIG_SMP
 	smp_init_ps3();
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index d135cef9ed6..ccae3d446b9 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -186,14 +186,24 @@ static void spu_unmap(struct spu *spu)
 	iounmap(spu_pdata(spu)->shadow);
 }
 
+/**
+ * setup_areas - Map the spu regions into the address space.
+ *
+ * The current HV requires the spu shadow regs to be mapped with the
+ * PTE page protection bits set as read-only (PP=3).  This implementation
+ * uses the low level __ioremap() to bypass the page protection settings
+ * inforced by ioremap_flags() to get the needed PTE bits set for the
+ * shadow regs.
+ */
+
 static int __init setup_areas(struct spu *spu)
 {
 	struct table {char* name; unsigned long addr; unsigned long size;};
+	static const unsigned long shadow_flags = _PAGE_NO_CACHE | 3;
 
-	spu_pdata(spu)->shadow = ioremap_flags(spu_pdata(spu)->shadow_addr,
-					       sizeof(struct spe_shadow),
-					       pgprot_val(PAGE_READONLY) |
-					       _PAGE_NO_CACHE);
+	spu_pdata(spu)->shadow = __ioremap(spu_pdata(spu)->shadow_addr,
+					   sizeof(struct spe_shadow),
+					   shadow_flags);
 	if (!spu_pdata(spu)->shadow) {
 		pr_debug("%s:%d: ioremap shadow failed\n", __func__, __LINE__);
 		goto fail_ioremap;
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index d66c3628a11..280ee88cb0b 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -347,16 +347,23 @@ static int ps3_system_bus_match(struct device *_dev,
 	struct ps3_system_bus_driver *drv = ps3_drv_to_system_bus_drv(_drv);
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 
-	result = dev->match_id == drv->match_id;
+	if (!dev->match_sub_id)
+		result = dev->match_id == drv->match_id;
+	else
+		result = dev->match_sub_id == drv->match_sub_id &&
+			dev->match_id == drv->match_id;
 
 	if (result)
-		pr_info("%s:%d: dev=%u(%s), drv=%u(%s): match\n", __func__,
-			__LINE__, dev->match_id, dev->core.bus_id,
-			drv->match_id, drv->core.name);
+		pr_info("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): match\n",
+			__func__, __LINE__,
+			dev->match_id, dev->match_sub_id, dev->core.bus_id,
+			drv->match_id, drv->match_sub_id, drv->core.name);
 	else
-		pr_debug("%s:%d: dev=%u(%s), drv=%u(%s): miss\n", __func__,
-			__LINE__, dev->match_id, dev->core.bus_id,
-			drv->match_id, drv->core.name);
+		pr_debug("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): miss\n",
+			__func__, __LINE__,
+			dev->match_id, dev->match_sub_id, dev->core.bus_id,
+			drv->match_id, drv->match_sub_id, drv->core.name);
+
 	return result;
 }
 
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 07fe5b69b9e..97619fd51e3 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -7,6 +7,7 @@ config PPC_PSERIES
 	select RTAS_ERROR_LOGGING
 	select PPC_UDBG_16550
 	select PPC_NATIVE
+	select PPC_PCI_CHOICE if EMBEDDED
 	default y
 
 config PPC_SPLPAR
@@ -39,3 +40,26 @@ config PPC_PSERIES_DEBUG
 	depends on PPC_PSERIES && PPC_EARLY_DEBUG
 	bool "Enable extra debug logging in platforms/pseries"
 	default y
+
+config PPC_SMLPAR
+	bool "Support for shared-memory logical partitions"
+	depends on PPC_PSERIES
+	select LPARCFG
+	default n
+	help
+	  Select this option to enable shared memory partition support.
+	  With this option a system running in an LPAR can be given more
+	  memory than physically available and will allow firmware to
+	  balance memory across many LPARs.
+
+config CMM
+	tristate "Collaborative memory management"
+	depends on PPC_SMLPAR
+	default y
+	help
+	  Select this option, if you want to enable the kernel interface
+	  to reduce the memory size of the system. This is accomplished
+	  by allocating pages of memory and put them "on hold". This only
+	  makes sense for a system running in an LPAR where the unused pages
+	  will be reused for other LPARs. The interface allows firmware to
+	  balance memory across many LPARs.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 554c6e42ef2..dfe574af2dc 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
 obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
+obj-$(CONFIG_CMM)		+= cmm.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
new file mode 100644
index 00000000000..38fe32a7cc7
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -0,0 +1,472 @@
+/*
+ * Collaborative memory management interface.
+ *
+ * Copyright (C) 2008 IBM Corporation
+ * Author(s): Brian King (brking@linux.vnet.ibm.com),
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/oom.h>
+#include <linux/sched.h>
+#include <linux/stringify.h>
+#include <linux/swap.h>
+#include <linux/sysdev.h>
+#include <asm/firmware.h>
+#include <asm/hvcall.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+
+#include "plpar_wrappers.h"
+
+#define CMM_DRIVER_VERSION	"1.0.0"
+#define CMM_DEFAULT_DELAY	1
+#define CMM_DEBUG			0
+#define CMM_DISABLE		0
+#define CMM_OOM_KB		1024
+#define CMM_MIN_MEM_MB		256
+#define KB2PAGES(_p)		((_p)>>(PAGE_SHIFT-10))
+#define PAGES2KB(_p)		((_p)<<(PAGE_SHIFT-10))
+
+static unsigned int delay = CMM_DEFAULT_DELAY;
+static unsigned int oom_kb = CMM_OOM_KB;
+static unsigned int cmm_debug = CMM_DEBUG;
+static unsigned int cmm_disabled = CMM_DISABLE;
+static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
+static struct sys_device cmm_sysdev;
+
+MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CMM_DRIVER_VERSION);
+
+module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. "
+		 "[Default=" __stringify(CMM_DEFAULT_DELAY) "]");
+module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. "
+		 "[Default=" __stringify(CMM_OOM_KB) "]");
+module_param_named(min_mem_mb, min_mem_mb, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. "
+		 "[Default=" __stringify(CMM_MIN_MEM_MB) "]");
+module_param_named(debug, cmm_debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. "
+		 "[Default=" __stringify(CMM_DEBUG) "]");
+
+#define CMM_NR_PAGES ((PAGE_SIZE - sizeof(void *) - sizeof(unsigned long)) / sizeof(unsigned long))
+
+#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); }
+
+struct cmm_page_array {
+	struct cmm_page_array *next;
+	unsigned long index;
+	unsigned long page[CMM_NR_PAGES];
+};
+
+static unsigned long loaned_pages;
+static unsigned long loaned_pages_target;
+static unsigned long oom_freed_pages;
+
+static struct cmm_page_array *cmm_page_list;
+static DEFINE_SPINLOCK(cmm_lock);
+
+static struct task_struct *cmm_thread_ptr;
+
+/**
+ * cmm_alloc_pages - Allocate pages and mark them as loaned
+ * @nr:	number of pages to allocate
+ *
+ * Return value:
+ * 	number of pages requested to be allocated which were not
+ **/
+static long cmm_alloc_pages(long nr)
+{
+	struct cmm_page_array *pa, *npa;
+	unsigned long addr;
+	long rc;
+
+	cmm_dbg("Begin request for %ld pages\n", nr);
+
+	while (nr) {
+		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
+				       __GFP_NORETRY | __GFP_NOMEMALLOC);
+		if (!addr)
+			break;
+		spin_lock(&cmm_lock);
+		pa = cmm_page_list;
+		if (!pa || pa->index >= CMM_NR_PAGES) {
+			/* Need a new page for the page list. */
+			spin_unlock(&cmm_lock);
+			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
+								       __GFP_NORETRY | __GFP_NOMEMALLOC);
+			if (!npa) {
+				pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+				free_page(addr);
+				break;
+			}
+			spin_lock(&cmm_lock);
+			pa = cmm_page_list;
+
+			if (!pa || pa->index >= CMM_NR_PAGES) {
+				npa->next = pa;
+				npa->index = 0;
+				pa = npa;
+				cmm_page_list = pa;
+			} else
+				free_page((unsigned long) npa);
+		}
+
+		if ((rc = plpar_page_set_loaned(__pa(addr)))) {
+			pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+			spin_unlock(&cmm_lock);
+			free_page(addr);
+			break;
+		}
+
+		pa->page[pa->index++] = addr;
+		loaned_pages++;
+		totalram_pages--;
+		spin_unlock(&cmm_lock);
+		nr--;
+	}
+
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_free_pages - Free pages and mark them as active
+ * @nr:	number of pages to free
+ *
+ * Return value:
+ * 	number of pages requested to be freed which were not
+ **/
+static long cmm_free_pages(long nr)
+{
+	struct cmm_page_array *pa;
+	unsigned long addr;
+
+	cmm_dbg("Begin free of %ld pages.\n", nr);
+	spin_lock(&cmm_lock);
+	pa = cmm_page_list;
+	while (nr) {
+		if (!pa || pa->index <= 0)
+			break;
+		addr = pa->page[--pa->index];
+
+		if (pa->index == 0) {
+			pa = pa->next;
+			free_page((unsigned long) cmm_page_list);
+			cmm_page_list = pa;
+		}
+
+		plpar_page_set_active(__pa(addr));
+		free_page(addr);
+		loaned_pages--;
+		nr--;
+		totalram_pages++;
+	}
+	spin_unlock(&cmm_lock);
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_oom_notify - OOM notifier
+ * @self:	notifier block struct
+ * @dummy:	not used
+ * @parm:	returned - number of pages freed
+ *
+ * Return value:
+ * 	NOTIFY_OK
+ **/
+static int cmm_oom_notify(struct notifier_block *self,
+			  unsigned long dummy, void *parm)
+{
+	unsigned long *freed = parm;
+	long nr = KB2PAGES(oom_kb);
+
+	cmm_dbg("OOM processing started\n");
+	nr = cmm_free_pages(nr);
+	loaned_pages_target = loaned_pages;
+	*freed += KB2PAGES(oom_kb) - nr;
+	oom_freed_pages += KB2PAGES(oom_kb) - nr;
+	cmm_dbg("OOM processing complete\n");
+	return NOTIFY_OK;
+}
+
+/**
+ * cmm_get_mpp - Read memory performance parameters
+ *
+ * Makes hcall to query the current page loan request from the hypervisor.
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_get_mpp(void)
+{
+	int rc;
+	struct hvcall_mpp_data mpp_data;
+	unsigned long active_pages_target;
+	signed long page_loan_request;
+
+	rc = h_get_mpp(&mpp_data);
+
+	if (rc != H_SUCCESS)
+		return;
+
+	page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
+	loaned_pages_target = page_loan_request + loaned_pages;
+	if (loaned_pages_target > oom_freed_pages)
+		loaned_pages_target -= oom_freed_pages;
+	else
+		loaned_pages_target = 0;
+
+	active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+
+	if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
+		loaned_pages_target = totalram_pages + loaned_pages -
+			((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+
+	cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
+		page_loan_request, loaned_pages, loaned_pages_target,
+		oom_freed_pages, totalram_pages);
+}
+
+static struct notifier_block cmm_oom_nb = {
+	.notifier_call = cmm_oom_notify
+};
+
+/**
+ * cmm_thread - CMM task thread
+ * @dummy:	not used
+ *
+ * Return value:
+ * 	0
+ **/
+static int cmm_thread(void *dummy)
+{
+	unsigned long timeleft;
+
+	while (1) {
+		timeleft = msleep_interruptible(delay * 1000);
+
+		if (kthread_should_stop() || timeleft) {
+			loaned_pages_target = loaned_pages;
+			break;
+		}
+
+		cmm_get_mpp();
+
+		if (loaned_pages_target > loaned_pages) {
+			if (cmm_alloc_pages(loaned_pages_target - loaned_pages))
+				loaned_pages_target = loaned_pages;
+		} else if (loaned_pages_target < loaned_pages)
+			cmm_free_pages(loaned_pages - loaned_pages_target);
+	}
+	return 0;
+}
+
+#define CMM_SHOW(name, format, args...)			\
+	static ssize_t show_##name(struct sys_device *dev,	\
+				   struct sysdev_attribute *attr,	\
+				   char *buf)			\
+	{							\
+		return sprintf(buf, format, ##args);		\
+	}							\
+	static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
+
+CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
+CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
+
+static ssize_t show_oom_pages(struct sys_device *dev,
+			      struct sysdev_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
+}
+
+static ssize_t store_oom_pages(struct sys_device *dev,
+			       struct sysdev_attribute *attr,
+			       const char *buf, size_t count)
+{
+	unsigned long val = simple_strtoul (buf, NULL, 10);
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	if (val != 0)
+		return -EBADMSG;
+
+	oom_freed_pages = 0;
+	return count;
+}
+
+static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO,
+		   show_oom_pages, store_oom_pages);
+
+static struct sysdev_attribute *cmm_attrs[] = {
+	&attr_loaned_kb,
+	&attr_loaned_target_kb,
+	&attr_oom_freed_kb,
+};
+
+static struct sysdev_class cmm_sysdev_class = {
+	.name = "cmm",
+};
+
+/**
+ * cmm_sysfs_register - Register with sysfs
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_sysfs_register(struct sys_device *sysdev)
+{
+	int i, rc;
+
+	if ((rc = sysdev_class_register(&cmm_sysdev_class)))
+		return rc;
+
+	sysdev->id = 0;
+	sysdev->cls = &cmm_sysdev_class;
+
+	if ((rc = sysdev_register(sysdev)))
+		goto class_unregister;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
+		if ((rc = sysdev_create_file(sysdev, cmm_attrs[i])))
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	while (--i >= 0)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+class_unregister:
+	sysdev_class_unregister(&cmm_sysdev_class);
+	return rc;
+}
+
+/**
+ * cmm_unregister_sysfs - Unregister from sysfs
+ *
+ **/
+static void cmm_unregister_sysfs(struct sys_device *sysdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+	sysdev_class_unregister(&cmm_sysdev_class);
+}
+
+/**
+ * cmm_init - Module initialization
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_init(void)
+{
+	int rc = -ENOMEM;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return -EOPNOTSUPP;
+
+	if ((rc = register_oom_notifier(&cmm_oom_nb)) < 0)
+		return rc;
+
+	if ((rc = cmm_sysfs_register(&cmm_sysdev)))
+		goto out_oom_notifier;
+
+	if (cmm_disabled)
+		return rc;
+
+	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+	if (IS_ERR(cmm_thread_ptr)) {
+		rc = PTR_ERR(cmm_thread_ptr);
+		goto out_unregister_sysfs;
+	}
+
+	return rc;
+
+out_unregister_sysfs:
+	cmm_unregister_sysfs(&cmm_sysdev);
+out_oom_notifier:
+	unregister_oom_notifier(&cmm_oom_nb);
+	return rc;
+}
+
+/**
+ * cmm_exit - Module exit
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_exit(void)
+{
+	if (cmm_thread_ptr)
+		kthread_stop(cmm_thread_ptr);
+	unregister_oom_notifier(&cmm_oom_nb);
+	cmm_free_pages(loaned_pages);
+	cmm_unregister_sysfs(&cmm_sysdev);
+}
+
+/**
+ * cmm_set_disable - Disable/Enable CMM
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_set_disable(const char *val, struct kernel_param *kp)
+{
+	int disable = simple_strtoul(val, NULL, 10);
+
+	if (disable != 0 && disable != 1)
+		return -EINVAL;
+
+	if (disable && !cmm_disabled) {
+		if (cmm_thread_ptr)
+			kthread_stop(cmm_thread_ptr);
+		cmm_thread_ptr = NULL;
+		cmm_free_pages(loaned_pages);
+	} else if (!disable && cmm_disabled) {
+		cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+		if (IS_ERR(cmm_thread_ptr))
+			return PTR_ERR(cmm_thread_ptr);
+	}
+
+	cmm_disabled = disable;
+	return 0;
+}
+
+module_param_call(disable, cmm_set_disable, param_get_uint,
+		  &cmm_disabled, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable, "Disable CMM. Set to 1 to disable. "
+		 "[Default=" __stringify(CMM_DISABLE) "]");
+
+module_init(cmm_init);
+module_exit(cmm_exit);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index c027f0a70a0..54816d75b57 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -75,9 +75,9 @@
  */
 
 /* If a device driver keeps reading an MMIO register in an interrupt
- * handler after a slot isolation event has occurred, we assume it
- * is broken and panic.  This sets the threshold for how many read
- * attempts we allow before panicking.
+ * handler after a slot isolation event, it might be broken.
+ * This sets the threshold for how many read attempts we allow
+ * before printing an error message.
  */
 #define EEH_MAX_FAILS	2100000
 
@@ -470,6 +470,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	unsigned long flags;
 	struct pci_dn *pdn;
 	int rc = 0;
+	const char *location;
 
 	total_mmio_ffs++;
 
@@ -509,18 +510,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	rc = 1;
 	if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
 		pdn->eeh_check_count ++;
-		if (pdn->eeh_check_count >= EEH_MAX_FAILS) {
-			printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
-			        pdn->eeh_check_count);
+		if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
+			location = of_get_property(dn, "ibm,loc-code", NULL);
+			printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
+				"location=%s driver=%s pci addr=%s\n",
+				pdn->eeh_check_count, location,
+				dev->driver->name, pci_name(dev));
+			printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+				dev->driver->name);
 			dump_stack();
-			msleep(5000);
-			
-			/* re-read the slot reset state */
-			if (read_slot_reset_state(pdn, rets) != 0)
-				rets[0] = -1;	/* reset state unknown */
-
-			/* If we are here, then we hit an infinite loop. Stop. */
-			panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev));
 		}
 		goto dn_unlock;
 	}
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 9a12908510f..a8c446697f9 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -48,9 +48,10 @@
 #include "plpar_wrappers.h"
 
 
-static void tce_build_pSeries(struct iommu_table *tbl, long index,
+static int tce_build_pSeries(struct iommu_table *tbl, long index,
 			      long npages, unsigned long uaddr,
-			      enum dma_data_direction direction)
+			      enum dma_data_direction direction,
+			      struct dma_attrs *attrs)
 {
 	u64 proto_tce;
 	u64 *tcep;
@@ -71,6 +72,7 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index,
 		uaddr += TCE_PAGE_SIZE;
 		tcep++;
 	}
+	return 0;
 }
 
 
@@ -93,13 +95,19 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 	return *tcep;
 }
 
-static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static void tce_free_pSeriesLP(struct iommu_table*, long, long);
+static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
+
+static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				long npages, unsigned long uaddr,
-				enum dma_data_direction direction)
+				enum dma_data_direction direction,
+				struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce, tce;
 	u64 rpn;
+	int ret = 0;
+	long tcenum_start = tcenum, npages_start = npages;
 
 	rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 	proto_tce = TCE_PCI_READ;
@@ -110,6 +118,13 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
 
+		if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+			ret = (int)rc;
+			tce_free_pSeriesLP(tbl, tcenum_start,
+			                   (npages_start - (npages + 1)));
+			break;
+		}
+
 		if (rc && printk_ratelimit()) {
 			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -121,23 +136,27 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum++;
 		rpn++;
 	}
+	return ret;
 }
 
 static DEFINE_PER_CPU(u64 *, tce_page) = NULL;
 
-static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				     long npages, unsigned long uaddr,
-				     enum dma_data_direction direction)
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce;
 	u64 *tcep;
 	u64 rpn;
 	long l, limit;
+	long tcenum_start = tcenum, npages_start = npages;
+	int ret = 0;
 
 	if (npages == 1) {
-		tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction);
-		return;
+		return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+		                           direction, attrs);
 	}
 
 	tcep = __get_cpu_var(tce_page);
@@ -149,9 +168,8 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcep = (u64 *)__get_free_page(GFP_ATOMIC);
 		/* If allocation fails, fall back to the loop implementation */
 		if (!tcep) {
-			tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-					    direction);
-			return;
+			return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+					    direction, attrs);
 		}
 		__get_cpu_var(tce_page) = tcep;
 	}
@@ -183,6 +201,13 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum += limit;
 	} while (npages > 0 && !rc);
 
+	if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+		ret = (int)rc;
+		tce_freemulti_pSeriesLP(tbl, tcenum_start,
+		                        (npages_start - (npages + limit)));
+		return ret;
+	}
+
 	if (rc && printk_ratelimit()) {
 		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -190,6 +215,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		printk("\ttce[0] val = 0x%lx\n", tcep[0]);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
+	return ret;
 }
 
 static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d8680b589dc..d967c1893ab 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -2,6 +2,7 @@
 #define _PSERIES_PLPAR_WRAPPERS_H
 
 #include <asm/hvcall.h>
+#include <asm/page.h>
 
 static inline long poll_pending(void)
 {
@@ -42,6 +43,38 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa)
 	return vpa_call(0x3, cpu, vpa);
 }
 
+static inline long plpar_page_set_loaned(unsigned long vpa)
+{
+	unsigned long cmo_page_sz = cmo_get_page_size();
+	long rc = 0;
+	int i;
+
+	for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+		rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa + i, 0);
+
+	for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+		plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE,
+				   vpa + i - cmo_page_sz, 0);
+
+	return rc;
+}
+
+static inline long plpar_page_set_active(unsigned long vpa)
+{
+	unsigned long cmo_page_sz = cmo_get_page_size();
+	long rc = 0;
+	int i;
+
+	for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+		rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa + i, 0);
+
+	for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+		plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED,
+				   vpa + i - cmo_page_sz, 0);
+
+	return rc;
+}
+
 extern void vpa_init(int cpu);
 
 static inline long plpar_pte_enter(unsigned long flags,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 90beb444e1d..7b01d67b4e4 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -68,6 +68,10 @@
 #include "plpar_wrappers.h"
 #include "pseries.h"
 
+int CMO_PrPSP = -1;
+int CMO_SecPSP = -1;
+unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT);
+EXPORT_SYMBOL(CMO_PageSize);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
@@ -314,6 +318,85 @@ static int pseries_set_xdabr(unsigned long dabr)
 			H_DABRX_KERNEL | H_DABRX_USER);
 }
 
+#define CMO_CHARACTERISTICS_TOKEN 44
+#define CMO_MAXLENGTH 1026
+
+/**
+ * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
+ * handle that here. (Stolen from parse_system_parameter_string)
+ */
+void pSeries_cmo_feature_init(void)
+{
+	char *ptr, *key, *value, *end;
+	int call_status;
+	int page_order = IOMMU_PAGE_SHIFT;
+
+	pr_debug(" -> fw_cmo_feature_init()\n");
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				CMO_CHARACTERISTICS_TOKEN,
+				__pa(rtas_data_buf),
+				RTAS_DATA_BUF_SIZE);
+
+	if (call_status != 0) {
+		spin_unlock(&rtas_data_buf_lock);
+		pr_debug("CMO not available\n");
+		pr_debug(" <- fw_cmo_feature_init()\n");
+		return;
+	}
+
+	end = rtas_data_buf + CMO_MAXLENGTH - 2;
+	ptr = rtas_data_buf + 2;	/* step over strlen value */
+	key = value = ptr;
+
+	while (*ptr && (ptr <= end)) {
+		/* Separate the key and value by replacing '=' with '\0' and
+		 * point the value at the string after the '='
+		 */
+		if (ptr[0] == '=') {
+			ptr[0] = '\0';
+			value = ptr + 1;
+		} else if (ptr[0] == '\0' || ptr[0] == ',') {
+			/* Terminate the string containing the key/value pair */
+			ptr[0] = '\0';
+
+			if (key == value) {
+				pr_debug("Malformed key/value pair\n");
+				/* Never found a '=', end processing */
+				break;
+			}
+
+			if (0 == strcmp(key, "CMOPageSize"))
+				page_order = simple_strtol(value, NULL, 10);
+			else if (0 == strcmp(key, "PrPSP"))
+				CMO_PrPSP = simple_strtol(value, NULL, 10);
+			else if (0 == strcmp(key, "SecPSP"))
+				CMO_SecPSP = simple_strtol(value, NULL, 10);
+			value = key = ptr + 1;
+		}
+		ptr++;
+	}
+
+	/* Page size is returned as the power of 2 of the page size,
+	 * convert to the page size in bytes before returning
+	 */
+	CMO_PageSize = 1 << page_order;
+	pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
+
+	if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
+		pr_info("CMO enabled\n");
+		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+		         CMO_SecPSP);
+		powerpc_firmware_features |= FW_FEATURE_CMO;
+	} else
+		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+		         CMO_SecPSP);
+	spin_unlock(&rtas_data_buf_lock);
+	pr_debug(" <- fw_cmo_feature_init()\n");
+}
+
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
  */
@@ -329,6 +412,7 @@ static void __init pSeries_init_early(void)
 	else if (firmware_has_feature(FW_FEATURE_XDABR))
 		ppc_md.set_dabr = pseries_set_xdabr;
 
+	pSeries_cmo_feature_init();
 	iommu_init_early_pSeries();
 
 	pr_debug(" <- pSeries_init_early()\n");
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 16a0ed28eb0..a90054b56d5 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc_cmos_setup.o
 obj-$(CONFIG_AXON_RAM)		+= axonram.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_IPIC)		+= ipic.o
@@ -36,7 +35,6 @@ obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
 endif
-endif
 
 # Temporary hack until we have migrated to asm-powerpc
 ifeq ($(ARCH),powerpc)
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 7f59188cd9a..9e105cbc5e5 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -57,6 +57,8 @@
 #define AXON_RAM_SECTOR_SIZE		1 << AXON_RAM_SECTOR_SHIFT
 #define AXON_RAM_IRQ_FLAGS		IRQF_SHARED | IRQF_TRIGGER_RISING
 
+static int azfs_major, azfs_minor;
+
 struct axon_ram_bank {
 	struct of_device	*device;
 	struct gendisk		*disk;
@@ -148,7 +150,10 @@ axon_ram_direct_access(struct block_device *device, sector_t sector,
 	struct axon_ram_bank *bank = device->bd_disk->private_data;
 	loff_t offset;
 
-	offset = sector << AXON_RAM_SECTOR_SHIFT;
+	offset = sector;
+	if (device->bd_part != NULL)
+		offset += device->bd_part->start_sect;
+	offset <<= AXON_RAM_SECTOR_SHIFT;
 	if (offset >= bank->size) {
 		dev_err(&bank->device->dev, "Access outside of address space\n");
 		return -ERANGE;
@@ -227,19 +232,14 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 		goto failed;
 	}
 
-	bank->disk->first_minor = 0;
+	bank->disk->major = azfs_major;
+	bank->disk->first_minor = azfs_minor;
 	bank->disk->fops = &axon_ram_devops;
 	bank->disk->private_data = bank;
 	bank->disk->driverfs_dev = &device->dev;
 
 	sprintf(bank->disk->disk_name, "%s%d",
 			AXON_RAM_DEVICE_NAME, axon_ram_bank_id);
-	bank->disk->major = register_blkdev(0, bank->disk->disk_name);
-	if (bank->disk->major < 0) {
-		dev_err(&device->dev, "Cannot register block device\n");
-		rc = -EFAULT;
-		goto failed;
-	}
 
 	bank->disk->queue = blk_alloc_queue(GFP_KERNEL);
 	if (bank->disk->queue == NULL) {
@@ -276,6 +276,8 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 		goto failed;
 	}
 
+	azfs_minor += bank->disk->minors;
+
 	return 0;
 
 failed:
@@ -310,7 +312,6 @@ axon_ram_remove(struct of_device *device)
 
 	device_remove_file(&device->dev, &dev_attr_ecc);
 	free_irq(bank->irq_id, device);
-	unregister_blkdev(bank->disk->major, bank->disk->disk_name);
 	del_gendisk(bank->disk);
 	iounmap((void __iomem *) bank->io_addr);
 	kfree(bank);
@@ -341,6 +342,14 @@ static struct of_platform_driver axon_ram_driver = {
 static int __init
 axon_ram_init(void)
 {
+	azfs_major = register_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
+	if (azfs_major < 0) {
+		printk(KERN_ERR "%s cannot become block device major number\n",
+				AXON_RAM_MODULE_NAME);
+		return -EFAULT;
+	}
+	azfs_minor = 0;
+
 	return of_register_platform_driver(&axon_ram_driver);
 }
 
@@ -351,6 +360,7 @@ static void __exit
 axon_ram_exit(void)
 {
 	of_unregister_platform_driver(&axon_ram_driver);
+	unregister_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
 }
 
 module_init(axon_ram_init);
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c
index a3a134c35b0..e0a53e3147b 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c
@@ -11,7 +11,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 661df42830b..4a04823e842 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
 
 #include <asm/fs_pd.h>
 
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
 #define CPM_MAP_SIZE    (0x4000)
 
 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
@@ -290,20 +295,24 @@ struct cpm_ioport16 {
 	__be16 res[3];
 };
 
-struct cpm_ioport32 {
-	__be32 dir, par, sor;
+struct cpm_ioport32b {
+	__be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+	__be32 dir, par, sor, odr, dat;
 };
 
 static void cpm1_set_pin32(int port, int pin, int flags)
 {
-	struct cpm_ioport32 __iomem *iop;
+	struct cpm_ioport32e __iomem *iop;
 	pin = 1 << (31 - pin);
 
 	if (port == CPM_PORTB)
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pbdir;
 	else
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pedir;
 
 	if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 
 	return 0;
 }
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be16(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	setbits16(&iop->dir, pin_mask);
+
+	cpm1_gpio16_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	clrbits16(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+	struct cpm1_gpio16_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio16_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 16;
+	gc->direction_input = cpm1_gpio16_dir_in;
+	gc->direction_output = cpm1_gpio16_dir_out;
+	gc->get = cpm1_gpio16_get;
+	gc->set = cpm1_gpio16_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	setbits32(&iop->dir, pin_mask);
+
+	cpm1_gpio32_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+	struct cpm1_gpio32_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm1_gpio32_dir_in;
+	gc->direction_output = cpm1_gpio32_dir_out;
+	gc->get = cpm1_gpio32_get;
+	gc->set = cpm1_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
+		cpm1_gpiochip_add32(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
+		cpm1_gpiochip_add16(np);
+
+	/* Port E uses CPM2 layout */
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 5a6c5dfc53e..f1c3395633b 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command);
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	(get_brgfreq())
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
 {
 	u32 __iomem *bp;
+	u32 val;
 
 	/* This is good enough to get SMCs running.....
 	*/
@@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate)
 		brg -= 4;
 	}
 	bp += brg;
-	out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
-	cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	u32 __iomem *bp;
-	u32 val;
-
-	if (brg < 4) {
-		bp = cpm2_map_size(im_brgc1, 16);
-	} else {
-		bp = cpm2_map_size(im_brgc5, 16);
-		brg -= 4;
-	}
-	bp += brg;
-	val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
 	if (div16)
 		val |= CPM_BRG_DIV16;
 
 	out_be32(bp, val);
 	cpm2_unmap(bp);
 }
+EXPORT_SYMBOL(__cpm2_setbrg);
 
 int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 {
@@ -377,3 +351,14 @@ void cpm2_set_pin(int port, int pin, int flags)
 	else
 		clrbits32(&iop[port].odr, pin);
 }
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b7296acb2..00d3d17c84a 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -19,6 +19,8 @@
 
 #include <linux/init.h>
 #include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
 
 #include <asm/udbg.h>
 #include <asm/io.h>
@@ -28,6 +30,10 @@
 
 #include <mm/mmu_decl.h>
 
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+#include <linux/of_gpio.h>
+#endif
+
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
 static u32 __iomem *cpm_udbg_txdesc =
 	(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
@@ -207,3 +213,135 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
 	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
 }
 EXPORT_SYMBOL(cpm_muram_dma);
+
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+
+struct cpm2_ioports {
+	u32 dir, par, sor, odr, dat;
+	u32 res[3];
+};
+
+struct cpm2_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm2_gpio32_chip *
+to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
+}
+
+static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+	cpm2_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
+	int value)
+{
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+	if (value)
+		cpm2_gc->cpdata |= pin_mask;
+	else
+		cpm2_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm2_gc->cpdata);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	__cpm2_gpio32_set(mm_gc, pin_mask, value);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+}
+
+static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	setbits32(&iop->dir, pin_mask);
+	__cpm2_gpio32_set(mm_gc, pin_mask, val);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
+	return 0;
+}
+
+static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
+	return 0;
+}
+
+int cpm2_gpiochip_add32(struct device_node *np)
+{
+	struct cpm2_gpio32_chip *cpm2_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+	if (!cpm2_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm2_gc->lock);
+
+	mm_gc = &cpm2_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm2_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm2_gpio32_dir_in;
+	gc->direction_output = cpm2_gpio32_dir_out;
+	gc->get = cpm2_gpio32_get;
+	gc->set = cpm2_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 005c2ecf976..89639ecbf38 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -147,9 +147,10 @@ static void dart_flush(struct iommu_table *tbl)
 	}
 }
 
-static void dart_build(struct iommu_table *tbl, long index,
+static int dart_build(struct iommu_table *tbl, long index,
 		       long npages, unsigned long uaddr,
-		       enum dma_data_direction direction)
+		       enum dma_data_direction direction,
+		       struct dma_attrs *attrs)
 {
 	unsigned int *dp;
 	unsigned int rpn;
@@ -183,6 +184,7 @@ static void dart_build(struct iommu_table *tbl, long index,
 	} else {
 		dart_dirty = 1;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 87b0aa13ab4..61e6d77efa4 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -27,6 +27,7 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
 /* atmu setup for fsl pci/pcie controller */
 void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
 {
@@ -248,3 +249,63 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+
+#if defined(CONFIG_PPC_83xx)
+int __init mpc83xx_add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	const int *bus_range;
+	int primary = 1, has_address = 0;
+	phys_addr_t immr = get_immrbase();
+
+	pr_debug("Adding PCI host bridge %s\n", dev->full_name);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = of_get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+	}
+
+	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+	hose = pcibios_alloc_controller(dev);
+	if (!hose)
+		return -ENOMEM;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
+	 * the other at 0x8600, we consider the 0x8500 the primary controller
+	 */
+	/* PCI 1 */
+	if ((rsrc.start & 0xfffff) == 0x8500) {
+		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
+	}
+	/* PCI 2 */
+	if ((rsrc.start & 0xfffff) == 0x8600) {
+		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
+		primary = 0;
+	}
+
+	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
+	       "Firmware bus number: %d->%d\n",
+	       (unsigned long long)rsrc.start, hose->first_busno,
+	       hose->last_busno);
+
+	pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+	    hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+	return 0;
+}
+#endif /* CONFIG_PPC_83xx */
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 37b04ad2657..13f30c2a61e 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -83,6 +83,7 @@ struct ccsr_pci {
 
 extern int fsl_add_bridge(struct device_node *dev, int is_primary);
 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
+extern int mpc83xx_add_bridge(struct device_node *dev);
 
 #endif /* __POWERPC_FSL_PCI_H */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index ebcec7362f9..214388e1180 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -207,66 +207,58 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-static int __init gfar_mdio_of_init(void)
+static int gfar_mdio_of_init_one(struct device_node *np)
 {
-	struct device_node *np = NULL;
+	int k;
+	struct device_node *child = NULL;
+	struct gianfar_mdio_data mdio_data;
 	struct platform_device *mdio_dev;
 	struct resource res;
 	int ret;
 
-	np = of_find_compatible_node(np, NULL, "fsl,gianfar-mdio");
+	memset(&res, 0, sizeof(res));
+	memset(&mdio_data, 0, sizeof(mdio_data));
 
-	/* try the deprecated version */
-	if (!np)
-		np = of_find_compatible_node(np, "mdio", "gianfar");
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
 
-	if (np) {
-		int k;
-		struct device_node *child = NULL;
-		struct gianfar_mdio_data mdio_data;
+	mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
+			res.start&0xfffff, &res, 1);
+	if (IS_ERR(mdio_dev))
+		return PTR_ERR(mdio_dev);
 
-		memset(&res, 0, sizeof(res));
-		memset(&mdio_data, 0, sizeof(mdio_data));
+	for (k = 0; k < 32; k++)
+		mdio_data.irq[k] = PHY_POLL;
 
-		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
-			goto err;
-
-		mdio_dev =
-		    platform_device_register_simple("fsl-gianfar_mdio",
-						    res.start, &res, 1);
-		if (IS_ERR(mdio_dev)) {
-			ret = PTR_ERR(mdio_dev);
-			goto err;
+	while ((child = of_get_next_child(np, child)) != NULL) {
+		int irq = irq_of_parse_and_map(child, 0);
+		if (irq != NO_IRQ) {
+			const u32 *id = of_get_property(child, "reg", NULL);
+			mdio_data.irq[*id] = irq;
 		}
+	}
 
-		for (k = 0; k < 32; k++)
-			mdio_data.irq[k] = PHY_POLL;
+	ret = platform_device_add_data(mdio_dev, &mdio_data,
+				sizeof(struct gianfar_mdio_data));
+	if (ret)
+		platform_device_unregister(mdio_dev);
 
-		while ((child = of_get_next_child(np, child)) != NULL) {
-			int irq = irq_of_parse_and_map(child, 0);
-			if (irq != NO_IRQ) {
-				const u32 *id = of_get_property(child,
-							"reg", NULL);
-				mdio_data.irq[*id] = irq;
-			}
-		}
+	return ret;
+}
 
-		ret =
-		    platform_device_add_data(mdio_dev, &mdio_data,
-					     sizeof(struct gianfar_mdio_data));
-		if (ret)
-			goto unreg;
-	}
+static int __init gfar_mdio_of_init(void)
+{
+	struct device_node *np = NULL;
 
-	of_node_put(np);
-	return 0;
+	for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
+		gfar_mdio_of_init_one(np);
 
-unreg:
-	platform_device_unregister(mdio_dev);
-err:
-	of_node_put(np);
-	return ret;
+	/* try the deprecated version */
+	for_each_compatible_node(np, "mdio", "gianfar");
+		gfar_mdio_of_init_one(np);
+
+	return 0;
 }
 
 arch_initcall(gfar_mdio_of_init);
@@ -296,6 +288,9 @@ static int __init gfar_of_init(void)
 		const phandle *ph;
 		int n_res = 2;
 
+		if (!of_device_is_available(np))
+			continue;
+
 		memset(r, 0, sizeof(r));
 		memset(&gfar_data, 0, sizeof(gfar_data));
 
@@ -357,6 +352,9 @@ static int __init gfar_of_init(void)
 		else
 			gfar_data.interface = PHY_INTERFACE_MODE_MII;
 
+		if (of_get_property(np, "fsl,magic-packet", NULL))
+			gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
+
 		ph = of_get_property(np, "phy-handle", NULL);
 		if (ph == NULL) {
 			u32 *fixed_link;
@@ -390,7 +388,7 @@ static int __init gfar_of_init(void)
 
 			gfar_data.phy_id = *id;
 			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
-				 (unsigned long long)res.start);
+				 (unsigned long long)res.start&0xfffff);
 
 			of_node_put(phy);
 			of_node_put(mdio);
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 52c831fa188..02429988735 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -10,6 +10,7 @@ extern u32 get_baudrate(void);
 extern u32 fsl_get_sys_freq(void);
 
 struct spi_board_info;
+struct device_node;
 
 extern int fsl_spi_init(struct spi_board_info *board_infos,
 			unsigned int num_board_infos,
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index caba1c0be5a..88a983ece5c 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
+#include <linux/fsl_devices.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -889,8 +890,78 @@ unsigned int ipic_get_irq(void)
 	return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
 
+#ifdef CONFIG_PM
+static struct {
+	u32 sicfr;
+	u32 siprr[2];
+	u32 simsr[2];
+	u32 sicnr;
+	u32 smprr[2];
+	u32 semsr;
+	u32 secnr;
+	u32 sermr;
+	u32 sercr;
+} ipic_saved_state;
+
+static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_saved_state.sicfr = ipic_read(ipic->regs, IPIC_SICFR);
+	ipic_saved_state.siprr[0] = ipic_read(ipic->regs, IPIC_SIPRR_A);
+	ipic_saved_state.siprr[1] = ipic_read(ipic->regs, IPIC_SIPRR_D);
+	ipic_saved_state.simsr[0] = ipic_read(ipic->regs, IPIC_SIMSR_H);
+	ipic_saved_state.simsr[1] = ipic_read(ipic->regs, IPIC_SIMSR_L);
+	ipic_saved_state.sicnr = ipic_read(ipic->regs, IPIC_SICNR);
+	ipic_saved_state.smprr[0] = ipic_read(ipic->regs, IPIC_SMPRR_A);
+	ipic_saved_state.smprr[1] = ipic_read(ipic->regs, IPIC_SMPRR_B);
+	ipic_saved_state.semsr = ipic_read(ipic->regs, IPIC_SEMSR);
+	ipic_saved_state.secnr = ipic_read(ipic->regs, IPIC_SECNR);
+	ipic_saved_state.sermr = ipic_read(ipic->regs, IPIC_SERMR);
+	ipic_saved_state.sercr = ipic_read(ipic->regs, IPIC_SERCR);
+
+	if (fsl_deep_sleep()) {
+		/* In deep sleep, make sure there can be no
+		 * pending interrupts, as this can cause
+		 * problems on 831x.
+		 */
+		ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+		ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+		ipic_write(ipic->regs, IPIC_SEMSR, 0);
+		ipic_write(ipic->regs, IPIC_SERMR, 0);
+	}
+
+	return 0;
+}
+
+static int ipic_resume(struct sys_device *sdev)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_write(ipic->regs, IPIC_SICFR, ipic_saved_state.sicfr);
+	ipic_write(ipic->regs, IPIC_SIPRR_A, ipic_saved_state.siprr[0]);
+	ipic_write(ipic->regs, IPIC_SIPRR_D, ipic_saved_state.siprr[1]);
+	ipic_write(ipic->regs, IPIC_SIMSR_H, ipic_saved_state.simsr[0]);
+	ipic_write(ipic->regs, IPIC_SIMSR_L, ipic_saved_state.simsr[1]);
+	ipic_write(ipic->regs, IPIC_SICNR, ipic_saved_state.sicnr);
+	ipic_write(ipic->regs, IPIC_SMPRR_A, ipic_saved_state.smprr[0]);
+	ipic_write(ipic->regs, IPIC_SMPRR_B, ipic_saved_state.smprr[1]);
+	ipic_write(ipic->regs, IPIC_SEMSR, ipic_saved_state.semsr);
+	ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr);
+	ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr);
+	ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr);
+
+	return 0;
+}
+#else
+#define ipic_suspend NULL
+#define ipic_resume NULL
+#endif
+
 static struct sysdev_class ipic_sysclass = {
 	.name = "ipic",
+	.suspend = ipic_suspend,
+	.resume = ipic_resume,
 };
 
 static struct sys_device device_ipic = {
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 4bb18f57901..1ce546462be 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -29,7 +29,7 @@ config QE_GPIO
 	bool "QE GPIO support"
 	depends on QUICC_ENGINE
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Say Y here if you're going to use hardware that connects to the
 	  QE GPIOs.
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 9e82d7e725a..b3b73ae57d6 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -64,7 +64,7 @@ static phys_addr_t qebase = -1;
 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;
-	unsigned int size;
+	int size;
 	const u32 *prop;
 
 	if (qebase != -1)
@@ -158,7 +158,7 @@ static unsigned int brg_clk = 0;
 unsigned int qe_get_brg_clk(void)
 {
 	struct device_node *qe;
-	unsigned int size;
+	int size;
 	const u32 *prop;
 
 	if (brg_clk)
@@ -305,7 +305,7 @@ EXPORT_SYMBOL(qe_put_snum);
 
 static int qe_sdma_init(void)
 {
-	struct sdma *sdma = &qe_immr->sdma;
+	struct sdma __iomem *sdma = &qe_immr->sdma;
 	unsigned long sdma_buf_offset;
 
 	if (!sdma)
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index d3c7f5af9bc..1d78071aad7 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -88,7 +88,7 @@ int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
 	return 0;
 }
 
-static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
 	unsigned int *reg_num, unsigned int *shift)
 {
 	unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
@@ -100,7 +100,7 @@ static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
 
 int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 {
-	__be32 *cmxucr;
+	__be32 __iomem *cmxucr;
 	unsigned int reg_num;
 	unsigned int shift;
 
@@ -121,7 +121,7 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
 	enum comm_dir mode)
 {
-	__be32 *cmxucr;
+	__be32 __iomem *cmxucr;
 	unsigned int reg_num;
 	unsigned int shift;
 	u32 clock_bits = 0;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index bcf88e6ce96..25fbbfaa837 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -46,7 +46,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
@@ -68,7 +68,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
 }
 EXPORT_SYMBOL(ucc_fast_dump_regs);
 
@@ -96,7 +96,7 @@ EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
 
 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 
 	uf_regs = uccf->uf_regs;
@@ -117,7 +117,7 @@ EXPORT_SYMBOL(ucc_fast_enable);
 
 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 
 	uf_regs = uccf->uf_regs;
@@ -139,7 +139,7 @@ EXPORT_SYMBOL(ucc_fast_disable);
 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
 {
 	struct ucc_fast_private *uccf;
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 	int ret;
 
@@ -208,6 +208,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccf);
 		return -ENOMEM;
 	}
 
@@ -216,10 +217,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->stopped_tx = 0;
 	uccf->stopped_rx = 0;
 	uf_regs = uccf->uf_regs;
-	uccf->p_ucce = (u32 *) & (uf_regs->ucce);
-	uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+	uccf->p_ucce = &uf_regs->ucce;
+	uccf->p_uccm = &uf_regs->uccm;
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-	uccf->p_utodr = (u16 *) & (uf_regs->utodr);
+	uccf->p_utodr = &uf_regs->utodr;
 #endif
 #ifdef STATISTICS
 	uccf->tx_frames = 0;
@@ -355,6 +356,9 @@ void ucc_fast_free(struct ucc_fast_private * uccf)
 	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
 		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
 
+	if (uccf->uf_regs)
+		iounmap(uccf->uf_regs);
+
 	kfree(uccf);
 }
 EXPORT_SYMBOL(ucc_fast_free);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index a578bc77b9d..e1d6a134015 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -171,6 +171,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
 	if (uccs->us_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccs);
 		return -ENOMEM;
 	}
 
@@ -367,10 +368,11 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
 	if (uccs->tx_base_offset)
 		qe_muram_free(uccs->tx_base_offset);
 
-	if (uccs->us_pram) {
+	if (uccs->us_pram)
 		qe_muram_free(uccs->us_pram_offset);
-		uccs->us_pram = NULL;
-	}
+
+	if (uccs->us_regs)
+		iounmap(uccs->us_regs);
 
 	kfree(uccs);
 }
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c09ddc0dbeb..c1879ebfd4f 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -21,6 +21,7 @@ static int  __init add_rtc(void)
 	struct device_node *np;
 	struct platform_device *pd;
 	struct resource res[2];
+	unsigned int num_res = 1;
 	int ret;
 
 	memset(&res, 0, sizeof(res));
@@ -41,14 +42,24 @@ static int  __init add_rtc(void)
 	if (res[0].start != RTC_PORT(0))
 		return -EINVAL;
 
-	/* Use a fixed interrupt value of 8 since on PPC if we are using this
-	 * its off an i8259 which we ensure has interrupt numbers 0..15. */
-	res[1].start = 8;
-	res[1].end = 8;
-	res[1].flags = IORESOURCE_IRQ;
+	np = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "pnpPNP,000");
+	if (np) {
+		of_node_put(np);
+		/*
+		 * Use a fixed interrupt value of 8 since on PPC if we are
+		 * using this its off an i8259 which we ensure has interrupt
+		 * numbers 0..15.
+		 */
+		res[1].start = 8;
+		res[1].end = 8;
+		res[1].flags = IORESOURCE_IRQ;
+		num_res++;
+	}
 
 	pd = platform_device_register_simple("rtc_cmos", -1,
-					     &res[0], 2);
+					     &res[0], num_res);
 
 	if (IS_ERR(pd))
 		return PTR_ERR(pd);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index eb530b4128b..8d41908e251 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 	depends on SPARSEMEM
 
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
@@ -565,6 +568,7 @@ bool "s390 guest support (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
+	select VIRTIO_CONSOLE
 	help
 	  Select this option if you want to run the kernel under s390 linux
 endmenu
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index c5cdb975d59..9b0bc2c9fba 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri May 30 09:49:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 19:43:29 2008
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -68,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -93,11 +92,17 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -113,6 +118,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -175,6 +181,8 @@ CONFIG_PREEMPT=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -185,8 +193,12 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -198,6 +210,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_MACHCHK_WARNING=y
 CONFIG_QDIO=y
 # CONFIG_QDIO_DEBUG is not set
+CONFIG_CHSC_SCH=m
 
 #
 # Misc
@@ -206,6 +219,7 @@ CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
 # CONFIG_PROCESS_DEBUG is not set
@@ -226,10 +240,6 @@ CONFIG_S390_HYPFS_FS=y
 CONFIG_KEXEC=y
 # CONFIG_ZFCPDUMP is not set
 CONFIG_S390_GUEST=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -364,7 +374,6 @@ CONFIG_NET_SCH_CBQ=m
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -430,7 +439,9 @@ CONFIG_CCW=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 CONFIG_SYS_HYPERVISOR=y
@@ -507,6 +518,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ZFCP=y
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=m
@@ -522,14 +538,10 @@ CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
 CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=y
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
+CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -544,7 +556,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 # CONFIG_WAN is not set
@@ -576,7 +587,10 @@ CONFIG_DEVKMEM=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_VIRTIO=m
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
@@ -616,6 +630,7 @@ CONFIG_MONWRITER=m
 CONFIG_S390_VMUR=m
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -693,6 +708,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -712,7 +728,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -780,6 +795,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -789,6 +805,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
@@ -847,6 +864,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -895,6 +916,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
 CONFIG_CRC7=m
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
new file mode 100644
index 00000000000..63a23415fba
--- /dev/null
+++ b/arch/s390/include/asm/Kbuild
@@ -0,0 +1,15 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += dasd.h
+header-y += monwriter.h
+header-y += qeth.h
+header-y += tape390.h
+header-y += ucontext.h
+header-y += vtoc.h
+header-y += zcrypt.h
+header-y += chsc.h
+
+unifdef-y += cmb.h
+unifdef-y += debug.h
+unifdef-y += chpid.h
+unifdef-y += schid.h
diff --git a/arch/s390/include/asm/airq.h b/arch/s390/include/asm/airq.h
new file mode 100644
index 00000000000..1ac80d6b058
--- /dev/null
+++ b/arch/s390/include/asm/airq.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-s390/airq.h
+ *
+ *    Copyright IBM Corp. 2002,2007
+ *    Author(s): Ingo Adlung <adlung@de.ibm.com>
+ *		 Cornelia Huck <cornelia.huck@de.ibm.com>
+ *		 Arnd Bergmann <arndb@de.ibm.com>
+ *		 Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_AIRQ_H
+#define _ASM_S390_AIRQ_H
+
+typedef void (*adapter_int_handler_t)(void *, void *);
+
+void *s390_register_adapter_interrupt(adapter_int_handler_t, void *, u8);
+void s390_unregister_adapter_interrupt(void *, u8);
+
+#endif /* _ASM_S390_AIRQ_H */
diff --git a/arch/s390/include/asm/appldata.h b/arch/s390/include/asm/appldata.h
new file mode 100644
index 00000000000..79283dac828
--- /dev/null
+++ b/arch/s390/include/asm/appldata.h
@@ -0,0 +1,90 @@
+/*
+ * include/asm-s390/appldata.h
+ *
+ * Copyright (C) IBM Corp. 2006
+ *
+ * Author(s): Melissa Howland <melissah@us.ibm.com>
+ */
+
+#ifndef _ASM_S390_APPLDATA_H
+#define _ASM_S390_APPLDATA_H
+
+#include <asm/io.h>
+
+#ifndef CONFIG_64BIT
+
+#define APPLDATA_START_INTERVAL_REC	0x00	/* Function codes for */
+#define APPLDATA_STOP_REC		0x01	/* DIAG 0xDC	      */
+#define APPLDATA_GEN_EVENT_REC		0x02
+#define APPLDATA_START_CONFIG_REC	0x03
+
+/*
+ * Parameter list for DIAGNOSE X'DC'
+ */
+struct appldata_parameter_list {
+	u16 diag;		/* The DIAGNOSE code X'00DC'	      */
+	u8  function;		/* The function code for the DIAGNOSE */
+	u8  parlist_length;	/* Length of the parameter list       */
+	u32 product_id_addr;	/* Address of the 16-byte product ID  */
+	u16 reserved;
+	u16 buffer_length;	/* Length of the application data buffer  */
+	u32 buffer_addr;	/* Address of the application data buffer */
+} __attribute__ ((packed));
+
+#else /* CONFIG_64BIT */
+
+#define APPLDATA_START_INTERVAL_REC	0x80
+#define APPLDATA_STOP_REC		0x81
+#define APPLDATA_GEN_EVENT_REC		0x82
+#define APPLDATA_START_CONFIG_REC	0x83
+
+/*
+ * Parameter list for DIAGNOSE X'DC'
+ */
+struct appldata_parameter_list {
+	u16 diag;
+	u8  function;
+	u8  parlist_length;
+	u32 unused01;
+	u16 reserved;
+	u16 buffer_length;
+	u32 unused02;
+	u64 product_id_addr;
+	u64 buffer_addr;
+} __attribute__ ((packed));
+
+#endif /* CONFIG_64BIT */
+
+struct appldata_product_id {
+	char prod_nr[7];	/* product number */
+	u16  prod_fn;		/* product function */
+	u8   record_nr; 	/* record number */
+	u16  version_nr;	/* version */
+	u16  release_nr;	/* release */
+	u16  mod_lvl;		/* modification level */
+} __attribute__ ((packed));
+
+static inline int appldata_asm(struct appldata_product_id *id,
+			       unsigned short fn, void *buffer,
+			       unsigned short length)
+{
+	struct appldata_parameter_list parm_list;
+	int ry;
+
+	if (!MACHINE_IS_VM)
+		return -ENOSYS;
+	parm_list.diag = 0xdc;
+	parm_list.function = fn;
+	parm_list.parlist_length = sizeof(parm_list);
+	parm_list.buffer_length = length;
+	parm_list.product_id_addr = (unsigned long) id;
+	parm_list.buffer_addr = virt_to_phys(buffer);
+	asm volatile(
+		"	diag	%1,%0,0xdc"
+		: "=d" (ry)
+		: "d" (&parm_list), "m" (parm_list), "m" (*id)
+		: "cc");
+	return ry;
+}
+
+#endif /* _ASM_S390_APPLDATA_H */
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
new file mode 100644
index 00000000000..2d184655bc5
--- /dev/null
+++ b/arch/s390/include/asm/atomic.h
@@ -0,0 +1,285 @@
+#ifndef __ARCH_S390_ATOMIC__
+#define __ARCH_S390_ATOMIC__
+
+#include <linux/compiler.h>
+
+/*
+ *  include/asm-s390/atomic.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow,
+ *		 Arnd Bergmann (arndb@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bitops.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ *
+ */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ * S390 uses 'Compare And Swap' for atomicity in SMP enviroment
+ */
+
+typedef struct {
+	int counter;
+} __attribute__ ((aligned (4))) atomic_t;
+#define ATOMIC_INIT(i)  { (i) }
+
+#ifdef __KERNEL__
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __CS_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+	asm volatile(							\
+		"	l	%0,%2\n"				\
+		"0:	lr	%1,%0\n"				\
+		op_string "	%1,%3\n"				\
+		"	cs	%0,%1,%2\n"				\
+		"	jl	0b"					\
+		: "=&d" (old_val), "=&d" (new_val),			\
+		  "=Q" (((atomic_t *)(ptr))->counter)			\
+		: "d" (op_val),	 "Q" (((atomic_t *)(ptr))->counter)	\
+		: "cc", "memory");					\
+	new_val;							\
+})
+
+#else /* __GNUC__ */
+
+#define __CS_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+	asm volatile(							\
+		"	l	%0,0(%3)\n"				\
+		"0:	lr	%1,%0\n"				\
+		op_string "	%1,%4\n"				\
+		"	cs	%0,%1,0(%3)\n"				\
+		"	jl	0b"					\
+		: "=&d" (old_val), "=&d" (new_val),			\
+		  "=m" (((atomic_t *)(ptr))->counter)			\
+		: "a" (ptr), "d" (op_val),				\
+		  "m" (((atomic_t *)(ptr))->counter)			\
+		: "cc", "memory");					\
+	new_val;							\
+})
+
+#endif /* __GNUC__ */
+
+static inline int atomic_read(const atomic_t *v)
+{
+	barrier();
+	return v->counter;
+}
+
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+	barrier();
+}
+
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	return __CS_LOOP(v, i, "ar");
+}
+#define atomic_add(_i, _v)		atomic_add_return(_i, _v)
+#define atomic_add_negative(_i, _v)	(atomic_add_return(_i, _v) < 0)
+#define atomic_inc(_v)			atomic_add_return(1, _v)
+#define atomic_inc_return(_v)		atomic_add_return(1, _v)
+#define atomic_inc_and_test(_v)		(atomic_add_return(1, _v) == 0)
+
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	return __CS_LOOP(v, i, "sr");
+}
+#define atomic_sub(_i, _v)		atomic_sub_return(_i, _v)
+#define atomic_sub_and_test(_i, _v)	(atomic_sub_return(_i, _v) == 0)
+#define atomic_dec(_v)			atomic_sub_return(1, _v)
+#define atomic_dec_return(_v)		atomic_sub_return(1, _v)
+#define atomic_dec_and_test(_v)		(atomic_sub_return(1, _v) == 0)
+
+static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v)
+{
+	       __CS_LOOP(v, ~mask, "nr");
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v)
+{
+	       __CS_LOOP(v, mask, "or");
+}
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+	asm volatile(
+		"	cs	%0,%2,%1"
+		: "+d" (old), "=Q" (v->counter)
+		: "d" (new), "Q" (v->counter)
+		: "cc", "memory");
+#else /* __GNUC__ */
+	asm volatile(
+		"	cs	%0,%3,0(%2)"
+		: "+d" (old), "=m" (v->counter)
+		: "a" (v), "d" (new), "m" (v->counter)
+		: "cc", "memory");
+#endif /* __GNUC__ */
+	return old;
+}
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == u))
+			break;
+		old = atomic_cmpxchg(v, c, c + a);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != u;
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#undef __CS_LOOP
+
+#ifdef __s390x__
+typedef struct {
+	long long counter;
+} __attribute__ ((aligned (8))) atomic64_t;
+#define ATOMIC64_INIT(i)  { (i) }
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __CSG_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+	asm volatile(							\
+		"	lg	%0,%2\n"				\
+		"0:	lgr	%1,%0\n"				\
+		op_string "	%1,%3\n"				\
+		"	csg	%0,%1,%2\n"				\
+		"	jl	0b"					\
+		: "=&d" (old_val), "=&d" (new_val),			\
+		  "=Q" (((atomic_t *)(ptr))->counter)			\
+		: "d" (op_val),	"Q" (((atomic_t *)(ptr))->counter)	\
+		: "cc", "memory" );					\
+	new_val;							\
+})
+
+#else /* __GNUC__ */
+
+#define __CSG_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+	asm volatile(							\
+		"	lg	%0,0(%3)\n"				\
+		"0:	lgr	%1,%0\n"				\
+		op_string "	%1,%4\n"				\
+		"	csg	%0,%1,0(%3)\n"				\
+		"	jl	0b"					\
+		: "=&d" (old_val), "=&d" (new_val),			\
+		  "=m" (((atomic_t *)(ptr))->counter)			\
+		: "a" (ptr), "d" (op_val),				\
+		  "m" (((atomic_t *)(ptr))->counter)			\
+		: "cc", "memory" );					\
+	new_val;							\
+})
+
+#endif /* __GNUC__ */
+
+static inline long long atomic64_read(const atomic64_t *v)
+{
+	barrier();
+	return v->counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	v->counter = i;
+	barrier();
+}
+
+static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
+{
+	return __CSG_LOOP(v, i, "agr");
+}
+#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
+#define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
+#define atomic64_inc(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
+
+static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
+{
+	return __CSG_LOOP(v, i, "sgr");
+}
+#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
+#define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
+#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
+
+static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
+{
+	       __CSG_LOOP(v, ~mask, "ngr");
+}
+
+static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v)
+{
+	       __CSG_LOOP(v, mask, "ogr");
+}
+
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
+					     long long old, long long new)
+{
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+	asm volatile(
+		"	csg	%0,%2,%1"
+		: "+d" (old), "=Q" (v->counter)
+		: "d" (new), "Q" (v->counter)
+		: "cc", "memory");
+#else /* __GNUC__ */
+	asm volatile(
+		"	csg	%0,%3,0(%2)"
+		: "+d" (old), "=m" (v->counter)
+		: "a" (v), "d" (new), "m" (v->counter)
+		: "cc", "memory");
+#endif /* __GNUC__ */
+	return old;
+}
+
+static __inline__ int atomic64_add_unless(atomic64_t *v,
+					  long long a, long long u)
+{
+	long long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == u))
+			break;
+		old = atomic64_cmpxchg(v, c, c + a);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != u;
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#undef __CSG_LOOP
+#endif
+
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+#include <asm-generic/atomic.h>
+#endif /* __KERNEL__ */
+#endif /* __ARCH_S390_ATOMIC__  */
diff --git a/arch/s390/include/asm/auxvec.h b/arch/s390/include/asm/auxvec.h
new file mode 100644
index 00000000000..0d340720fd9
--- /dev/null
+++ b/arch/s390/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMS390_AUXVEC_H
+#define __ASMS390_AUXVEC_H
+
+#endif
diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
new file mode 100644
index 00000000000..8e9243ae0c1
--- /dev/null
+++ b/arch/s390/include/asm/bitops.h
@@ -0,0 +1,884 @@
+#ifndef _S390_BITOPS_H
+#define _S390_BITOPS_H
+
+/*
+ *  include/asm-s390/bitops.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bitops.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ *
+ */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+
+/*
+ * 32 bit bitops format:
+ * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr;
+ * bit 32 is the LSB of *(addr+4). That combined with the
+ * big endian byte order on S390 give the following bit
+ * order in memory:
+ *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \
+ *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
+ * after that follows the next long with bit numbers
+ *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
+ *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
+ * The reason for this bit ordering is the fact that
+ * in the architecture independent code bits operations
+ * of the form "flags |= (1 << bitnr)" are used INTERMIXED
+ * with operation of the form "set_bit(bitnr, flags)".
+ *
+ * 64 bit bitops format:
+ * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr;
+ * bit 64 is the LSB of *(addr+8). That combined with the
+ * big endian byte order on S390 give the following bit
+ * order in memory:
+ *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
+ *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
+ *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10
+ *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
+ * after that follows the next long with bit numbers
+ *    7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70
+ *    6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60
+ *    5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50
+ *    4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40
+ * The reason for this bit ordering is the fact that
+ * in the architecture independent code bits operations
+ * of the form "flags |= (1 << bitnr)" are used INTERMIXED
+ * with operation of the form "set_bit(bitnr, flags)".
+ */
+
+/* bitmap tables from arch/S390/kernel/bitmap.S */
+extern const char _oi_bitmap[];
+extern const char _ni_bitmap[];
+extern const char _zb_findmap[];
+extern const char _sb_findmap[];
+
+#ifndef __s390x__
+
+#define __BITOPS_ALIGN		3
+#define __BITOPS_WORDSIZE	32
+#define __BITOPS_OR		"or"
+#define __BITOPS_AND		"nr"
+#define __BITOPS_XOR		"xr"
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	l	%0,%2\n"			\
+		"0:	lr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	cs	%0,%1,%2\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=Q" (*(unsigned long *) __addr)		\
+		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
+		: "cc");
+
+#else /* __GNUC__ */
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	l	%0,0(%4)\n"			\
+		"0:	lr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	cs	%0,%1,0(%4)\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=m" (*(unsigned long *) __addr)		\
+		: "d" (__val), "a" (__addr),			\
+		  "m" (*(unsigned long *) __addr) : "cc");
+
+#endif /* __GNUC__ */
+
+#else /* __s390x__ */
+
+#define __BITOPS_ALIGN		7
+#define __BITOPS_WORDSIZE	64
+#define __BITOPS_OR		"ogr"
+#define __BITOPS_AND		"ngr"
+#define __BITOPS_XOR		"xgr"
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	lg	%0,%2\n"			\
+		"0:	lgr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	csg	%0,%1,%2\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=Q" (*(unsigned long *) __addr)		\
+		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
+		: "cc");
+
+#else /* __GNUC__ */
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	lg	%0,0(%4)\n"			\
+		"0:	lgr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	csg	%0,%1,0(%4)\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=m" (*(unsigned long *) __addr)		\
+		: "d" (__val), "a" (__addr),			\
+		  "m" (*(unsigned long *) __addr) : "cc");
+
+
+#endif /* __GNUC__ */
+
+#endif /* __s390x__ */
+
+#define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE)
+#define __BITOPS_BARRIER() asm volatile("" : : : "memory")
+
+#ifdef CONFIG_SMP
+/*
+ * SMP safe set_bit routine based on compare and swap (CS)
+ */
+static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make OR mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+}
+
+/*
+ * SMP safe clear_bit routine based on compare and swap (CS)
+ */
+static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make AND mask */
+	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+}
+
+/*
+ * SMP safe change_bit routine based on compare and swap (CS)
+ */
+static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make XOR mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+}
+
+/*
+ * SMP safe test_and_set_bit routine based on compare and swap (CS)
+ */
+static inline int
+test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make OR/test mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+	__BITOPS_BARRIER();
+	return (old & mask) != 0;
+}
+
+/*
+ * SMP safe test_and_clear_bit routine based on compare and swap (CS)
+ */
+static inline int
+test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make AND/test mask */
+	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+	__BITOPS_BARRIER();
+	return (old ^ new) != 0;
+}
+
+/*
+ * SMP safe test_and_change_bit routine based on compare and swap (CS) 
+ */
+static inline int
+test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make XOR/test mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+	__BITOPS_BARRIER();
+	return (old & mask) != 0;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * fast, non-SMP set_bit routine
+ */
+static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	oc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr) : "a" (addr),
+		  "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr |= 1 << (nr & 7);
+}
+
+#define set_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_set_bit((nr),(addr)) : \
+ __set_bit((nr),(addr)) )
+
+/*
+ * fast, non-SMP clear_bit routine
+ */
+static inline void 
+__clear_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	nc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)	: "a" (addr),
+		  "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc");
+}
+
+static inline void 
+__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr &= ~(1 << (nr & 7));
+}
+
+#define clear_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_clear_bit((nr),(addr)) : \
+ __clear_bit((nr),(addr)) )
+
+/* 
+ * fast, non-SMP change_bit routine 
+ */
+static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	xc	0(1,%1),0(%2)"
+		:  "=m" (*(char *) addr) : "a" (addr),
+		   "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) 
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr ^= 1 << (nr & 7);
+}
+
+#define change_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_change_bit((nr),(addr)) : \
+ __change_bit((nr),(addr)) )
+
+/*
+ * fast, non-SMP test_and_set_bit routine
+ */
+static inline int
+test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	oc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
+
+/*
+ * fast, non-SMP test_and_clear_bit routine
+ */
+static inline int
+test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	nc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_ni_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
+
+/*
+ * fast, non-SMP test_and_change_bit routine
+ */
+static inline int
+test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	xc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
+
+#ifdef CONFIG_SMP
+#define set_bit             set_bit_cs
+#define clear_bit           clear_bit_cs
+#define change_bit          change_bit_cs
+#define test_and_set_bit    test_and_set_bit_cs
+#define test_and_clear_bit  test_and_clear_bit_cs
+#define test_and_change_bit test_and_change_bit_cs
+#else
+#define set_bit             set_bit_simple
+#define clear_bit           clear_bit_simple
+#define change_bit          change_bit_simple
+#define test_and_set_bit    test_and_set_bit_simple
+#define test_and_clear_bit  test_and_clear_bit_simple
+#define test_and_change_bit test_and_change_bit_simple
+#endif
+
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+
+static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(volatile unsigned char *) addr;
+	return (ch >> (nr & 7)) & 1;
+}
+
+static inline int 
+__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
+    return (((volatile char *) addr)
+	    [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7))) != 0;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)) )
+
+/*
+ * Optimized find bit helper functions.
+ */
+
+/**
+ * __ffz_word_loop - find byte offset of first long != -1UL
+ * @addr: pointer to array of unsigned long
+ * @size: size of the array in bits
+ */
+static inline unsigned long __ffz_word_loop(const unsigned long *addr,
+					    unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long bytes = 0;
+
+	asm volatile(
+#ifndef __s390x__
+		"	ahi	%1,-1\n"
+		"	sra	%1,5\n"
+		"	jz	1f\n"
+		"0:	c	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,4(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#else
+		"	aghi	%1,-1\n"
+		"	srag	%1,%1,6\n"
+		"	jz	1f\n"
+		"0:	cg	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,8(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#endif
+		: "+&a" (bytes), "+&d" (size)
+		: "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr)
+		: "cc" );
+	return bytes;
+}
+
+/**
+ * __ffs_word_loop - find byte offset of first long != 0UL
+ * @addr: pointer to array of unsigned long
+ * @size: size of the array in bits
+ */
+static inline unsigned long __ffs_word_loop(const unsigned long *addr,
+					    unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long bytes = 0;
+
+	asm volatile(
+#ifndef __s390x__
+		"	ahi	%1,-1\n"
+		"	sra	%1,5\n"
+		"	jz	1f\n"
+		"0:	c	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,4(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#else
+		"	aghi	%1,-1\n"
+		"	srag	%1,%1,6\n"
+		"	jz	1f\n"
+		"0:	cg	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,8(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#endif
+		: "+&a" (bytes), "+&a" (size)
+		: "d" (0UL), "a" (addr), "m" (*(addrtype *) addr)
+		: "cc" );
+	return bytes;
+}
+
+/**
+ * __ffz_word - add number of the first unset bit
+ * @nr: base value the bit number is added to
+ * @word: the word that is searched for unset bits
+ */
+static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
+{
+#ifdef __s390x__
+	if (likely((word & 0xffffffff) == 0xffffffff)) {
+		word >>= 32;
+		nr += 32;
+	}
+#endif
+	if (likely((word & 0xffff) == 0xffff)) {
+		word >>= 16;
+		nr += 16;
+	}
+	if (likely((word & 0xff) == 0xff)) {
+		word >>= 8;
+		nr += 8;
+	}
+	return nr + _zb_findmap[(unsigned char) word];
+}
+
+/**
+ * __ffs_word - add number of the first set bit
+ * @nr: base value the bit number is added to
+ * @word: the word that is searched for set bits
+ */
+static inline unsigned long __ffs_word(unsigned long nr, unsigned long word)
+{
+#ifdef __s390x__
+	if (likely((word & 0xffffffff) == 0)) {
+		word >>= 32;
+		nr += 32;
+	}
+#endif
+	if (likely((word & 0xffff) == 0)) {
+		word >>= 16;
+		nr += 16;
+	}
+	if (likely((word & 0xff) == 0)) {
+		word >>= 8;
+		nr += 8;
+	}
+	return nr + _sb_findmap[(unsigned char) word];
+}
+
+
+/**
+ * __load_ulong_be - load big endian unsigned long
+ * @p: pointer to array of unsigned long
+ * @offset: byte offset of source value in the array
+ */
+static inline unsigned long __load_ulong_be(const unsigned long *p,
+					    unsigned long offset)
+{
+	p = (unsigned long *)((unsigned long) p + offset);
+	return *p;
+}
+
+/**
+ * __load_ulong_le - load little endian unsigned long
+ * @p: pointer to array of unsigned long
+ * @offset: byte offset of source value in the array
+ */
+static inline unsigned long __load_ulong_le(const unsigned long *p,
+					    unsigned long offset)
+{
+	unsigned long word;
+
+	p = (unsigned long *)((unsigned long) p + offset);
+#ifndef __s390x__
+	asm volatile(
+		"	ic	%0,0(%1)\n"
+		"	icm	%0,2,1(%1)\n"
+		"	icm	%0,4,2(%1)\n"
+		"	icm	%0,8,3(%1)"
+		: "=&d" (word) : "a" (p), "m" (*p) : "cc");
+#else
+	asm volatile(
+		"	lrvg	%0,%1"
+		: "=d" (word) : "m" (*p) );
+#endif
+	return word;
+}
+
+/*
+ * The various find bit functions.
+ */
+
+/*
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	return __ffz_word(0, word);
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs (unsigned long word)
+{
+	return __ffs_word(0, word);
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+	if (!x)
+		return 0;
+	return __ffs_word(1, x);
+}
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+static inline unsigned long find_first_zero_bit(const unsigned long *addr,
+						unsigned long size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffz_word_loop(addr, size);
+	bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+static inline unsigned long find_first_bit(const unsigned long * addr,
+					   unsigned long size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffs_word_loop(addr, size);
+	bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline int find_next_zero_bit (const unsigned long * addr,
+				      unsigned long size,
+				      unsigned long offset)
+{
+        const unsigned long *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * __ffz_word returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = __ffz_word(bit, *p >> bit);
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + find_first_zero_bit(p, size);
+}
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline int find_next_bit (const unsigned long * addr,
+				 unsigned long size,
+				 unsigned long offset)
+{
+        const unsigned long *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * __ffs_word returns __BITOPS_WORDSIZE
+		 * if no one bit is present in the word.
+		 */
+		set = __ffs_word(0, *p & (~0UL << bit));
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + find_first_bit(p, size);
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	return find_first_bit(b, 140);
+}
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+/*
+ * ATTENTION: intel byte ordering convention for ext2 and minix !!
+ * bit 0 is the LSB of addr; bit 31 is the MSB of addr;
+ * bit 32 is the LSB of (addr+4).
+ * That combined with the little endian byte order of Intel gives the
+ * following bit order in memory:
+ *    07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \
+ *    23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
+ */
+
+#define ext2_set_bit(nr, addr)       \
+	__test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_set_bit_atomic(lock, nr, addr)       \
+	test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr)     \
+	__test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_clear_bit_atomic(lock, nr, addr)     \
+	test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_test_bit(nr, addr)      \
+	test_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+
+static inline int ext2_find_first_zero_bit(void *vaddr, unsigned int size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffz_word_loop(vaddr, size);
+	bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size,
+					  unsigned long offset)
+{
+        unsigned long *addr = vaddr, *p;
+	unsigned long bit, set;
+
+        if (offset >= size)
+                return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+        if (bit) {
+		/*
+		 * s390 version of ffz returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit);
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+        }
+	return offset + ext2_find_first_zero_bit(p, size);
+}
+
+static inline unsigned long ext2_find_first_bit(void *vaddr,
+						unsigned long size)
+{
+	unsigned long bytes, bits;
+
+	if (!size)
+		return 0;
+	bytes = __ffs_word_loop(vaddr, size);
+	bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+static inline int ext2_find_next_bit(void *vaddr, unsigned long size,
+				     unsigned long offset)
+{
+	unsigned long *addr = vaddr, *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * s390 version of ffz returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit));
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + ext2_find_first_bit(p, size);
+}
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _S390_BITOPS_H */
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
new file mode 100644
index 00000000000..384e3621e34
--- /dev/null
+++ b/arch/s390/include/asm/bug.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_S390_BUG_H
+#define _ASM_S390_BUG_H
+
+#include <linux/kernel.h>
+
+#ifdef CONFIG_BUG
+
+#ifdef CONFIG_64BIT
+#define S390_LONG ".quad"
+#else
+#define S390_LONG ".long"
+#endif
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define __EMIT_BUG(x) do {					\
+	asm volatile(						\
+		"0:	j	0b+2\n"				\
+		"1:\n"						\
+		".section .rodata.str,\"aMS\",@progbits,1\n"	\
+		"2:	.asciz	\""__FILE__"\"\n"		\
+		".previous\n"					\
+		".section __bug_table,\"a\"\n"			\
+		"3:\t"	S390_LONG "\t1b,2b\n"			\
+		"	.short	%0,%1\n"			\
+		"	.org	3b+%2\n"			\
+		".previous\n"					\
+		: : "i" (__LINE__),				\
+		    "i" (x),					\
+		    "i" (sizeof(struct bug_entry)));		\
+} while (0)
+
+#else /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define __EMIT_BUG(x) do {				\
+	asm volatile(					\
+		"0:	j	0b+2\n"			\
+		"1:\n"					\
+		".section __bug_table,\"a\"\n"		\
+		"2:\t"	S390_LONG "\t1b\n"		\
+		"	.short	%0\n"			\
+		"	.org	2b+%1\n"		\
+		".previous\n"				\
+		: : "i" (x),				\
+		    "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()	__EMIT_BUG(0)
+
+#define WARN_ON(x) ({					\
+	int __ret_warn_on = !!(x);			\
+	if (__builtin_constant_p(__ret_warn_on)) {	\
+		if (__ret_warn_on)			\
+			__EMIT_BUG(BUGFLAG_WARNING);	\
+	} else {					\
+		if (unlikely(__ret_warn_on))		\
+			__EMIT_BUG(BUGFLAG_WARNING);	\
+	}						\
+	unlikely(__ret_warn_on);			\
+})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_S390_BUG_H */
diff --git a/arch/s390/include/asm/bugs.h b/arch/s390/include/asm/bugs.h
new file mode 100644
index 00000000000..011f1e6a2a6
--- /dev/null
+++ b/arch/s390/include/asm/bugs.h
@@ -0,0 +1,22 @@
+/*
+ *  include/asm-s390/bugs.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bugs.h"
+ *    Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *      void check_bugs(void);
+ */
+
+static inline void check_bugs(void)
+{
+  /* s390 has no bugs ... */
+}
diff --git a/arch/s390/include/asm/byteorder.h b/arch/s390/include/asm/byteorder.h
new file mode 100644
index 00000000000..1fe2492baa8
--- /dev/null
+++ b/arch/s390/include/asm/byteorder.h
@@ -0,0 +1,125 @@
+#ifndef _S390_BYTEORDER_H
+#define _S390_BYTEORDER_H
+
+/*
+ *  include/asm-s390/byteorder.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+#ifdef __s390x__
+static inline __u64 ___arch__swab64p(const __u64 *x)
+{
+	__u64 result;
+
+	asm volatile("lrvg %0,%1" : "=d" (result) : "m" (*x));
+	return result;
+}
+
+static inline __u64 ___arch__swab64(__u64 x)
+{
+	__u64 result;
+
+	asm volatile("lrvgr %0,%1" : "=d" (result) : "d" (x));
+	return result;
+}
+
+static inline void ___arch__swab64s(__u64 *x)
+{
+	*x = ___arch__swab64p(x);
+}
+#endif /* __s390x__ */
+
+static inline __u32 ___arch__swab32p(const __u32 *x)
+{
+	__u32 result;
+	
+	asm volatile(
+#ifndef __s390x__
+		"	icm	%0,8,3(%1)\n"
+		"	icm	%0,4,2(%1)\n"
+		"	icm	%0,2,1(%1)\n"
+		"	ic	%0,0(%1)"
+		: "=&d" (result) : "a" (x), "m" (*x) : "cc");
+#else /* __s390x__ */
+		"	lrv	%0,%1"
+		: "=d" (result) : "m" (*x));
+#endif /* __s390x__ */
+	return result;
+}
+
+static inline __u32 ___arch__swab32(__u32 x)
+{
+#ifndef __s390x__
+	return ___arch__swab32p(&x);
+#else /* __s390x__ */
+	__u32 result;
+	
+	asm volatile("lrvr  %0,%1" : "=d" (result) : "d" (x));
+	return result;
+#endif /* __s390x__ */
+}
+
+static __inline__ void ___arch__swab32s(__u32 *x)
+{
+	*x = ___arch__swab32p(x);
+}
+
+static __inline__ __u16 ___arch__swab16p(const __u16 *x)
+{
+	__u16 result;
+	
+	asm volatile(
+#ifndef __s390x__
+		"	icm	%0,2,1(%1)\n"
+		"	ic	%0,0(%1)\n"
+		: "=&d" (result) : "a" (x), "m" (*x) : "cc");
+#else /* __s390x__ */
+		"	lrvh	%0,%1"
+		: "=d" (result) : "m" (*x));
+#endif /* __s390x__ */
+	return result;
+}
+
+static __inline__ __u16 ___arch__swab16(__u16 x)
+{
+	return ___arch__swab16p(&x);
+}
+
+static __inline__ void ___arch__swab16s(__u16 *x)
+{
+	*x = ___arch__swab16p(x);
+}
+
+#ifdef __s390x__
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab64p(x) ___arch__swab64p(x)
+#define __arch__swab64s(x) ___arch__swab64s(x)
+#endif /* __s390x__ */
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab32p(x) ___arch__swab32p(x)
+#define __arch__swab16p(x) ___arch__swab16p(x)
+#define __arch__swab32s(x) ___arch__swab32s(x)
+#define __arch__swab16s(x) ___arch__swab16s(x)
+
+#ifndef __s390x__
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+#else /* __s390x__ */
+#define __BYTEORDER_HAS_U64__
+#endif /* __s390x__ */
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _S390_BYTEORDER_H */
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
new file mode 100644
index 00000000000..9b866816863
--- /dev/null
+++ b/arch/s390/include/asm/cache.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-s390/cache.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *
+ *  Derived from "include/asm-i386/cache.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ */
+
+#ifndef __ARCH_S390_CACHE_H
+#define __ARCH_S390_CACHE_H
+
+#define L1_CACHE_BYTES     256
+#define L1_CACHE_SHIFT     8
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#endif
diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h
new file mode 100644
index 00000000000..49d5af916d0
--- /dev/null
+++ b/arch/s390/include/asm/cacheflush.h
@@ -0,0 +1,31 @@
+#ifndef _S390_CACHEFLUSH_H
+#define _S390_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the s390. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* _S390_CACHEFLUSH_H */
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
new file mode 100644
index 00000000000..ba007d8df94
--- /dev/null
+++ b/arch/s390/include/asm/ccwdev.h
@@ -0,0 +1,192 @@
+/*
+ *  include/asm-s390/ccwdev.h
+ *  include/asm-s390x/ccwdev.h
+ *
+ *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Arnd Bergmann <arndb@de.ibm.com>
+ *
+ *  Interface for CCW device drivers
+ */
+#ifndef _S390_CCWDEV_H_
+#define _S390_CCWDEV_H_
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <asm/fcx.h>
+
+/* structs from asm/cio.h */
+struct irb;
+struct ccw1;
+struct ccw_dev_id;
+
+/* simplified initializers for struct ccw_device:
+ * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one
+ * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */
+#define CCW_DEVICE(cu, cum) 						\
+	.cu_type=(cu), .cu_model=(cum),					\
+	.match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE			\
+		   | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0))
+
+#define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm)				\
+	.cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\
+	.match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE			\
+		   | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) 	\
+		   | CCW_DEVICE_ID_MATCH_DEVICE_TYPE			\
+		   | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0)
+
+/* scan through an array of device ids and return the first
+ * entry that matches the device.
+ *
+ * the array must end with an entry containing zero match_flags
+ */
+static inline const struct ccw_device_id *
+ccw_device_id_match(const struct ccw_device_id *array,
+			const struct ccw_device_id *match)
+{
+	const struct ccw_device_id *id = array;
+
+	for (id = array; id->match_flags; id++) {
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE)
+		    && (id->cu_type != match->cu_type))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL)
+		    && (id->cu_model != match->cu_model))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE)
+		    && (id->dev_type != match->dev_type))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL)
+		    && (id->dev_model != match->dev_model))
+			continue;
+
+		return id;
+	}
+
+	return NULL;
+}
+
+/**
+ * struct ccw_device - channel attached device
+ * @ccwlock: pointer to device lock
+ * @id: id of this device
+ * @drv: ccw driver for this device
+ * @dev: embedded device structure
+ * @online: online status of device
+ * @handler: interrupt handler
+ *
+ * @handler is a member of the device rather than the driver since a driver
+ * can have different interrupt handlers for different ccw devices
+ * (multi-subchannel drivers).
+ */
+struct ccw_device {
+	spinlock_t *ccwlock;
+/* private: */
+	struct ccw_device_private *private;	/* cio private information */
+/* public: */
+	struct ccw_device_id id;
+	struct ccw_driver *drv;
+	struct device dev;
+	int online;
+	void (*handler) (struct ccw_device *, unsigned long, struct irb *);
+};
+
+
+/**
+ * struct ccw driver - device driver for channel attached devices
+ * @owner: owning module
+ * @ids: ids supported by this driver
+ * @probe: function called on probe
+ * @remove: function called on remove
+ * @set_online: called when setting device online
+ * @set_offline: called when setting device offline
+ * @notify: notify driver of device state changes
+ * @shutdown: called at device shutdown
+ * @driver: embedded device driver structure
+ * @name: device driver name
+ */
+struct ccw_driver {
+	struct module *owner;
+	struct ccw_device_id *ids;
+	int (*probe) (struct ccw_device *);
+	void (*remove) (struct ccw_device *);
+	int (*set_online) (struct ccw_device *);
+	int (*set_offline) (struct ccw_device *);
+	int (*notify) (struct ccw_device *, int);
+	void (*shutdown) (struct ccw_device *);
+	struct device_driver driver;
+	char *name;
+};
+
+extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv,
+					      const char *bus_id);
+
+/* devices drivers call these during module load and unload.
+ * When a driver is registered, its probe method is called
+ * when new devices for its type pop up */
+extern int  ccw_driver_register   (struct ccw_driver *driver);
+extern void ccw_driver_unregister (struct ccw_driver *driver);
+
+struct ccw1;
+
+extern int ccw_device_set_options_mask(struct ccw_device *, unsigned long);
+extern int ccw_device_set_options(struct ccw_device *, unsigned long);
+extern void ccw_device_clear_options(struct ccw_device *, unsigned long);
+
+/* Allow for i/o completion notification after primary interrupt status. */
+#define CCWDEV_EARLY_NOTIFICATION	0x0001
+/* Report all interrupt conditions. */
+#define CCWDEV_REPORT_ALL	 	0x0002
+/* Try to perform path grouping. */
+#define CCWDEV_DO_PATHGROUP             0x0004
+/* Allow forced onlining of boxed devices. */
+#define CCWDEV_ALLOW_FORCE              0x0008
+
+extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
+			    unsigned long, __u8, unsigned long);
+extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *,
+				    unsigned long, __u8, unsigned long, int);
+extern int ccw_device_start_key(struct ccw_device *, struct ccw1 *,
+				unsigned long, __u8, __u8, unsigned long);
+extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *,
+					unsigned long, __u8, __u8,
+					unsigned long, int);
+
+
+extern int ccw_device_resume(struct ccw_device *);
+extern int ccw_device_halt(struct ccw_device *, unsigned long);
+extern int ccw_device_clear(struct ccw_device *, unsigned long);
+int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw,
+			    unsigned long intparm, u8 lpm, u8 key);
+int ccw_device_tm_start_key(struct ccw_device *, struct tcw *,
+			    unsigned long, u8, u8);
+int ccw_device_tm_start_timeout_key(struct ccw_device *, struct tcw *,
+			    unsigned long, u8, u8, int);
+int ccw_device_tm_start(struct ccw_device *, struct tcw *,
+			    unsigned long, u8);
+int ccw_device_tm_start_timeout(struct ccw_device *, struct tcw *,
+			    unsigned long, u8, int);
+int ccw_device_tm_intrg(struct ccw_device *cdev);
+
+extern int ccw_device_set_online(struct ccw_device *cdev);
+extern int ccw_device_set_offline(struct ccw_device *cdev);
+
+
+extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd);
+extern __u8 ccw_device_get_path_mask(struct ccw_device *);
+extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
+
+#define get_ccwdev_lock(x) (x)->ccwlock
+
+#define to_ccwdev(n) container_of(n, struct ccw_device, dev)
+#define to_ccwdrv(n) container_of(n, struct ccw_driver, driver)
+
+extern struct ccw_device *ccw_device_probe_console(void);
+
+// FIXME: these have to go
+extern int _ccw_device_get_subchannel_number(struct ccw_device *);
+
+extern void *ccw_device_get_chp_desc(struct ccw_device *, int);
+#endif /* _S390_CCWDEV_H_ */
diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h
new file mode 100644
index 00000000000..a27f68985a7
--- /dev/null
+++ b/arch/s390/include/asm/ccwgroup.h
@@ -0,0 +1,69 @@
+#ifndef S390_CCWGROUP_H
+#define S390_CCWGROUP_H
+
+struct ccw_device;
+struct ccw_driver;
+
+/**
+ * struct ccwgroup_device - ccw group device
+ * @creator_id: unique number of the driver
+ * @state: online/offline state
+ * @count: number of attached slave devices
+ * @dev: embedded device structure
+ * @cdev: variable number of slave devices, allocated as needed
+ */
+struct ccwgroup_device {
+	unsigned long creator_id;
+	enum {
+		CCWGROUP_OFFLINE,
+		CCWGROUP_ONLINE,
+	} state;
+/* private: */
+	atomic_t onoff;
+	struct mutex reg_mutex;
+/* public: */
+	unsigned int count;
+	struct device	dev;
+	struct ccw_device *cdev[0];
+};
+
+/**
+ * struct ccwgroup_driver - driver for ccw group devices
+ * @owner: driver owner
+ * @name: driver name
+ * @max_slaves: maximum number of slave devices
+ * @driver_id: unique id
+ * @probe: function called on probe
+ * @remove: function called on remove
+ * @set_online: function called when device is set online
+ * @set_offline: function called when device is set offline
+ * @shutdown: function called when device is shut down
+ * @driver: embedded driver structure
+ */
+struct ccwgroup_driver {
+	struct module *owner;
+	char *name;
+	int max_slaves;
+	unsigned long driver_id;
+
+	int (*probe) (struct ccwgroup_device *);
+	void (*remove) (struct ccwgroup_device *);
+	int (*set_online) (struct ccwgroup_device *);
+	int (*set_offline) (struct ccwgroup_device *);
+	void (*shutdown)(struct ccwgroup_device *);
+
+	struct device_driver driver;
+};
+
+extern int  ccwgroup_driver_register   (struct ccwgroup_driver *cdriver);
+extern void ccwgroup_driver_unregister (struct ccwgroup_driver *cdriver);
+int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
+				struct ccw_driver *cdrv, int num_devices,
+				const char *buf);
+
+extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev);
+extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev);
+
+#define to_ccwgroupdev(x) container_of((x), struct ccwgroup_device, dev)
+#define to_ccwgroupdrv(x) container_of((x), struct ccwgroup_driver, driver)
+#endif
diff --git a/arch/s390/include/asm/checksum.h b/arch/s390/include/asm/checksum.h
new file mode 100644
index 00000000000..d5a8e7c1477
--- /dev/null
+++ b/arch/s390/include/asm/checksum.h
@@ -0,0 +1,166 @@
+#ifndef _S390_CHECKSUM_H
+#define _S390_CHECKSUM_H
+
+/*
+ *  include/asm-s390/checksum.h
+ *    S390 fast network checksum routines
+ *    see also arch/S390/lib/checksum.c
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Ulrich Hild        (first version)
+ *               Martin Schwidefsky (heavily optimized CKSM version)
+ *               D.J. Barrow        (third attempt) 
+ */
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+static inline __wsum
+csum_partial(const void *buff, int len, __wsum sum)
+{
+	register unsigned long reg2 asm("2") = (unsigned long) buff;
+	register unsigned long reg3 asm("3") = (unsigned long) len;
+
+	asm volatile(
+		"0:	cksm	%0,%1\n"	/* do checksum on longs */
+		"	jo	0b\n"
+		: "+d" (sum), "+d" (reg2), "+d" (reg3) : : "cc", "memory");
+	return sum;
+}
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ *
+ * Copy from userspace and compute checksum.  If we catch an exception
+ * then zero the rest of the buffer.
+ */
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+                                          int len, __wsum sum,
+                                          int *err_ptr)
+{
+	int missing;
+
+	missing = copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*err_ptr = -EFAULT;
+	}
+		
+	return csum_partial(dst, len, sum);
+}
+
+
+static inline __wsum
+csum_partial_copy_nocheck (const void *src, void *dst, int len, __wsum sum)
+{
+        memcpy(dst,src,len);
+	return csum_partial(dst, len, sum);
+}
+
+/*
+ *      Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	asm volatile(
+		"	slr	%N1,%N1\n"	/* %0 = H L */
+		"	lr	%1,%0\n"	/* %0 = H L, %1 = H L 0 0 */
+		"	srdl	%1,16\n"	/* %0 = H L, %1 = 0 H L 0 */
+		"	alr	%1,%N1\n"	/* %0 = H L, %1 = L H L 0 */
+		"	alr	%0,%1\n"	/* %0 = H+L+C L+H */
+		"	srl	%0,16\n"	/* %0 = H+L+C */
+		: "+&d" (sum), "=d" (rp) : : "cc");
+#else /* __s390x__ */
+	asm volatile(
+		"	sr	3,3\n"		/* %0 = H*65536 + L */
+		"	lr	2,%0\n"		/* %0 = H L, 2/3 = H L / 0 0 */
+		"	srdl	2,16\n"		/* %0 = H L, 2/3 = 0 H / L 0 */
+		"	alr	2,3\n"		/* %0 = H L, 2/3 = L H / L 0 */
+		"	alr	%0,2\n"		/* %0 = H+L+C L+H */
+		"	srl	%0,16\n"	/* %0 = H+L+C */
+		: "+&d" (sum) : : "cc", "2", "3");
+#endif /* __s390x__ */
+	return (__force __sum16) ~sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	return csum_fold(csum_partial(iph, ihl*4, 0));
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 32-bit checksum
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+                   unsigned short len, unsigned short proto,
+                   __wsum sum)
+{
+	__u32 csum = (__force __u32)sum;
+
+	csum += (__force __u32)saddr;
+	if (csum < (__force __u32)saddr)
+		csum++;
+
+	csum += (__force __u32)daddr;
+	if (csum < (__force __u32)daddr)
+		csum++;
+
+	csum += len + proto;
+	if (csum < len + proto)
+		csum++;
+
+	return (__force __wsum)csum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+                  unsigned short len, unsigned short proto,
+                  __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* _S390_CHECKSUM_H */
+
+
diff --git a/arch/s390/include/asm/chpid.h b/arch/s390/include/asm/chpid.h
new file mode 100644
index 00000000000..dfe3c7f3439
--- /dev/null
+++ b/arch/s390/include/asm/chpid.h
@@ -0,0 +1,56 @@
+/*
+ *  drivers/s390/cio/chpid.h
+ *
+ *    Copyright IBM Corp. 2007
+ *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CHPID_H
+#define _ASM_S390_CHPID_H _ASM_S390_CHPID_H
+
+#include <linux/string.h>
+#include <asm/types.h>
+
+#define __MAX_CHPID 255
+
+struct chp_id {
+	u8 reserved1;
+	u8 cssid;
+	u8 reserved2;
+	u8 id;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+#include <asm/cio.h>
+
+static inline void chp_id_init(struct chp_id *chpid)
+{
+	memset(chpid, 0, sizeof(struct chp_id));
+}
+
+static inline int chp_id_is_equal(struct chp_id *a, struct chp_id *b)
+{
+	return (a->id == b->id) && (a->cssid == b->cssid);
+}
+
+static inline void chp_id_next(struct chp_id *chpid)
+{
+	if (chpid->id < __MAX_CHPID)
+		chpid->id++;
+	else {
+		chpid->id = 0;
+		chpid->cssid++;
+	}
+}
+
+static inline int chp_id_is_valid(struct chp_id *chpid)
+{
+	return (chpid->cssid <= __MAX_CSSID);
+}
+
+
+#define chp_id_for_each(c) \
+	for (chp_id_init(c); chp_id_is_valid(c); chp_id_next(c))
+#endif /* __KERNEL */
+
+#endif /* _ASM_S390_CHPID_H */
diff --git a/arch/s390/include/asm/chsc.h b/arch/s390/include/asm/chsc.h
new file mode 100644
index 00000000000..d38d0cf62d4
--- /dev/null
+++ b/arch/s390/include/asm/chsc.h
@@ -0,0 +1,127 @@
+/*
+ * ioctl interface for /dev/chsc
+ *
+ * Copyright 2008 IBM Corp.
+ * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
+ */
+
+#ifndef _ASM_CHSC_H
+#define _ASM_CHSC_H
+
+#include <asm/chpid.h>
+#include <asm/schid.h>
+
+struct chsc_async_header {
+	__u16 length;
+	__u16 code;
+	__u32 cmd_dependend;
+	__u32 key : 4;
+	__u32 : 28;
+	struct subchannel_id sid;
+} __attribute__ ((packed));
+
+struct chsc_async_area {
+	struct chsc_async_header header;
+	__u8 data[PAGE_SIZE - 16 /* size of chsc_async_header */];
+} __attribute__ ((packed));
+
+
+struct chsc_response_struct {
+	__u16 length;
+	__u16 code;
+	__u32 parms;
+	__u8 data[PAGE_SIZE - 8];
+} __attribute__ ((packed));
+
+struct chsc_chp_cd {
+	struct chp_id chpid;
+	int m;
+	int fmt;
+	struct chsc_response_struct cpcb;
+};
+
+struct chsc_cu_cd {
+	__u16 cun;
+	__u8 cssid;
+	int m;
+	int fmt;
+	struct chsc_response_struct cucb;
+};
+
+struct chsc_sch_cud {
+	struct subchannel_id schid;
+	int fmt;
+	struct chsc_response_struct scub;
+};
+
+struct conf_id {
+	int m;
+	__u8 cssid;
+	__u8 ssid;
+};
+
+struct chsc_conf_info {
+	struct conf_id id;
+	int fmt;
+	struct chsc_response_struct scid;
+};
+
+struct ccl_parm_chpid {
+	int m;
+	struct chp_id chp;
+};
+
+struct ccl_parm_cssids {
+	__u8 f_cssid;
+	__u8 l_cssid;
+};
+
+struct chsc_comp_list {
+	struct {
+		enum {
+			CCL_CU_ON_CHP = 1,
+			CCL_CHP_TYPE_CAP = 2,
+			CCL_CSS_IMG = 4,
+			CCL_CSS_IMG_CONF_CHAR = 5,
+			CCL_IOP_CHP = 6,
+		} ctype;
+		int fmt;
+		struct ccl_parm_chpid chpid;
+		struct ccl_parm_cssids cssids;
+	} req;
+	struct chsc_response_struct sccl;
+};
+
+struct chsc_dcal {
+	struct {
+		enum {
+			DCAL_CSS_IID_PN = 4,
+		} atype;
+		__u32 list_parm[2];
+		int fmt;
+	} req;
+	struct chsc_response_struct sdcal;
+};
+
+struct chsc_cpd_info {
+	struct chp_id chpid;
+	int m;
+	int fmt;
+	int rfmt;
+	int c;
+	struct chsc_response_struct chpdb;
+};
+
+#define CHSC_IOCTL_MAGIC 'c'
+
+#define CHSC_START _IOWR(CHSC_IOCTL_MAGIC, 0x81, struct chsc_async_area)
+#define CHSC_INFO_CHANNEL_PATH _IOWR(CHSC_IOCTL_MAGIC, 0x82, \
+				    struct chsc_chp_cd)
+#define CHSC_INFO_CU _IOWR(CHSC_IOCTL_MAGIC, 0x83, struct chsc_cu_cd)
+#define CHSC_INFO_SCH_CU _IOWR(CHSC_IOCTL_MAGIC, 0x84, struct chsc_sch_cud)
+#define CHSC_INFO_CI _IOWR(CHSC_IOCTL_MAGIC, 0x85, struct chsc_conf_info)
+#define CHSC_INFO_CCL _IOWR(CHSC_IOCTL_MAGIC, 0x86, struct chsc_comp_list)
+#define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
+#define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
+
+#endif
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
new file mode 100644
index 00000000000..6dccb071aec
--- /dev/null
+++ b/arch/s390/include/asm/cio.h
@@ -0,0 +1,514 @@
+/*
+ *  include/asm-s390/cio.h
+ *  include/asm-s390x/cio.h
+ *
+ * Common interface for I/O on S/390
+ */
+#ifndef _ASM_S390_CIO_H_
+#define _ASM_S390_CIO_H_
+
+#include <linux/spinlock.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+
+#define LPM_ANYPATH 0xff
+#define __MAX_CSSID 0
+
+/**
+ * struct cmd_scsw - command-mode subchannel status word
+ * @key: subchannel key
+ * @sctl: suspend control
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @pfch: prefetch
+ * @isic: initial-status interruption control
+ * @alcc: address-limit checking control
+ * @ssi: suppress-suspended interruption
+ * @zcc: zero condition code
+ * @ectl: extended control
+ * @pno: path not operational
+ * @res: reserved
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @cpa: channel program address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @count: residual count
+ */
+struct cmd_scsw {
+	__u32 key  : 4;
+	__u32 sctl : 1;
+	__u32 eswf : 1;
+	__u32 cc   : 2;
+	__u32 fmt  : 1;
+	__u32 pfch : 1;
+	__u32 isic : 1;
+	__u32 alcc : 1;
+	__u32 ssi  : 1;
+	__u32 zcc  : 1;
+	__u32 ectl : 1;
+	__u32 pno  : 1;
+	__u32 res  : 1;
+	__u32 fctl : 3;
+	__u32 actl : 7;
+	__u32 stctl : 5;
+	__u32 cpa;
+	__u32 dstat : 8;
+	__u32 cstat : 8;
+	__u32 count : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct tm_scsw - transport-mode subchannel status word
+ * @key: subchannel key
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @x: IRB-format control
+ * @q: interrogate-complete
+ * @ectl: extended control
+ * @pno: path not operational
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @tcw: TCW address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @fcxs: FCX status
+ * @schxs: subchannel-extended status
+ */
+struct tm_scsw {
+	u32 key:4;
+	u32 :1;
+	u32 eswf:1;
+	u32 cc:2;
+	u32 fmt:3;
+	u32 x:1;
+	u32 q:1;
+	u32 :1;
+	u32 ectl:1;
+	u32 pno:1;
+	u32 :1;
+	u32 fctl:3;
+	u32 actl:7;
+	u32 stctl:5;
+	u32 tcw;
+	u32 dstat:8;
+	u32 cstat:8;
+	u32 fcxs:8;
+	u32 schxs:8;
+} __attribute__ ((packed));
+
+/**
+ * union scsw - subchannel status word
+ * @cmd: command-mode SCSW
+ * @tm: transport-mode SCSW
+ */
+union scsw {
+	struct cmd_scsw cmd;
+	struct tm_scsw tm;
+} __attribute__ ((packed));
+
+int scsw_is_tm(union scsw *scsw);
+u32 scsw_key(union scsw *scsw);
+u32 scsw_eswf(union scsw *scsw);
+u32 scsw_cc(union scsw *scsw);
+u32 scsw_ectl(union scsw *scsw);
+u32 scsw_pno(union scsw *scsw);
+u32 scsw_fctl(union scsw *scsw);
+u32 scsw_actl(union scsw *scsw);
+u32 scsw_stctl(union scsw *scsw);
+u32 scsw_dstat(union scsw *scsw);
+u32 scsw_cstat(union scsw *scsw);
+int scsw_is_solicited(union scsw *scsw);
+int scsw_is_valid_key(union scsw *scsw);
+int scsw_is_valid_eswf(union scsw *scsw);
+int scsw_is_valid_cc(union scsw *scsw);
+int scsw_is_valid_ectl(union scsw *scsw);
+int scsw_is_valid_pno(union scsw *scsw);
+int scsw_is_valid_fctl(union scsw *scsw);
+int scsw_is_valid_actl(union scsw *scsw);
+int scsw_is_valid_stctl(union scsw *scsw);
+int scsw_is_valid_dstat(union scsw *scsw);
+int scsw_is_valid_cstat(union scsw *scsw);
+int scsw_cmd_is_valid_key(union scsw *scsw);
+int scsw_cmd_is_valid_sctl(union scsw *scsw);
+int scsw_cmd_is_valid_eswf(union scsw *scsw);
+int scsw_cmd_is_valid_cc(union scsw *scsw);
+int scsw_cmd_is_valid_fmt(union scsw *scsw);
+int scsw_cmd_is_valid_pfch(union scsw *scsw);
+int scsw_cmd_is_valid_isic(union scsw *scsw);
+int scsw_cmd_is_valid_alcc(union scsw *scsw);
+int scsw_cmd_is_valid_ssi(union scsw *scsw);
+int scsw_cmd_is_valid_zcc(union scsw *scsw);
+int scsw_cmd_is_valid_ectl(union scsw *scsw);
+int scsw_cmd_is_valid_pno(union scsw *scsw);
+int scsw_cmd_is_valid_fctl(union scsw *scsw);
+int scsw_cmd_is_valid_actl(union scsw *scsw);
+int scsw_cmd_is_valid_stctl(union scsw *scsw);
+int scsw_cmd_is_valid_dstat(union scsw *scsw);
+int scsw_cmd_is_valid_cstat(union scsw *scsw);
+int scsw_cmd_is_solicited(union scsw *scsw);
+int scsw_tm_is_valid_key(union scsw *scsw);
+int scsw_tm_is_valid_eswf(union scsw *scsw);
+int scsw_tm_is_valid_cc(union scsw *scsw);
+int scsw_tm_is_valid_fmt(union scsw *scsw);
+int scsw_tm_is_valid_x(union scsw *scsw);
+int scsw_tm_is_valid_q(union scsw *scsw);
+int scsw_tm_is_valid_ectl(union scsw *scsw);
+int scsw_tm_is_valid_pno(union scsw *scsw);
+int scsw_tm_is_valid_fctl(union scsw *scsw);
+int scsw_tm_is_valid_actl(union scsw *scsw);
+int scsw_tm_is_valid_stctl(union scsw *scsw);
+int scsw_tm_is_valid_dstat(union scsw *scsw);
+int scsw_tm_is_valid_cstat(union scsw *scsw);
+int scsw_tm_is_valid_fcxs(union scsw *scsw);
+int scsw_tm_is_valid_schxs(union scsw *scsw);
+int scsw_tm_is_solicited(union scsw *scsw);
+
+#define SCSW_FCTL_CLEAR_FUNC	 0x1
+#define SCSW_FCTL_HALT_FUNC	 0x2
+#define SCSW_FCTL_START_FUNC	 0x4
+
+#define SCSW_ACTL_SUSPENDED	 0x1
+#define SCSW_ACTL_DEVACT	 0x2
+#define SCSW_ACTL_SCHACT	 0x4
+#define SCSW_ACTL_CLEAR_PEND	 0x8
+#define SCSW_ACTL_HALT_PEND	 0x10
+#define SCSW_ACTL_START_PEND	 0x20
+#define SCSW_ACTL_RESUME_PEND	 0x40
+
+#define SCSW_STCTL_STATUS_PEND	 0x1
+#define SCSW_STCTL_SEC_STATUS	 0x2
+#define SCSW_STCTL_PRIM_STATUS	 0x4
+#define SCSW_STCTL_INTER_STATUS	 0x8
+#define SCSW_STCTL_ALERT_STATUS	 0x10
+
+#define DEV_STAT_ATTENTION	 0x80
+#define DEV_STAT_STAT_MOD	 0x40
+#define DEV_STAT_CU_END		 0x20
+#define DEV_STAT_BUSY		 0x10
+#define DEV_STAT_CHN_END	 0x08
+#define DEV_STAT_DEV_END	 0x04
+#define DEV_STAT_UNIT_CHECK	 0x02
+#define DEV_STAT_UNIT_EXCEP	 0x01
+
+#define SCHN_STAT_PCI		 0x80
+#define SCHN_STAT_INCORR_LEN	 0x40
+#define SCHN_STAT_PROG_CHECK	 0x20
+#define SCHN_STAT_PROT_CHECK	 0x10
+#define SCHN_STAT_CHN_DATA_CHK	 0x08
+#define SCHN_STAT_CHN_CTRL_CHK	 0x04
+#define SCHN_STAT_INTF_CTRL_CHK	 0x02
+#define SCHN_STAT_CHAIN_CHECK	 0x01
+
+/*
+ * architectured values for first sense byte
+ */
+#define SNS0_CMD_REJECT		0x80
+#define SNS_CMD_REJECT		SNS0_CMD_REJEC
+#define SNS0_INTERVENTION_REQ	0x40
+#define SNS0_BUS_OUT_CHECK	0x20
+#define SNS0_EQUIPMENT_CHECK	0x10
+#define SNS0_DATA_CHECK		0x08
+#define SNS0_OVERRUN		0x04
+#define SNS0_INCOMPL_DOMAIN	0x01
+
+/*
+ * architectured values for second sense byte
+ */
+#define SNS1_PERM_ERR		0x80
+#define SNS1_INV_TRACK_FORMAT	0x40
+#define SNS1_EOC		0x20
+#define SNS1_MESSAGE_TO_OPER	0x10
+#define SNS1_NO_REC_FOUND	0x08
+#define SNS1_FILE_PROTECTED	0x04
+#define SNS1_WRITE_INHIBITED	0x02
+#define SNS1_INPRECISE_END	0x01
+
+/*
+ * architectured values for third sense byte
+ */
+#define SNS2_REQ_INH_WRITE	0x80
+#define SNS2_CORRECTABLE	0x40
+#define SNS2_FIRST_LOG_ERR	0x20
+#define SNS2_ENV_DATA_PRESENT	0x10
+#define SNS2_INPRECISE_END	0x04
+
+/**
+ * struct ccw1 - channel command word
+ * @cmd_code: command code
+ * @flags: flags, like IDA adressing, etc.
+ * @count: byte count
+ * @cda: data address
+ *
+ * The ccw is the basic structure to build channel programs that perform
+ * operations with the device or the control unit. Only Format-1 channel
+ * command words are supported.
+ */
+struct ccw1 {
+	__u8  cmd_code;
+	__u8  flags;
+	__u16 count;
+	__u32 cda;
+} __attribute__ ((packed,aligned(8)));
+
+#define CCW_FLAG_DC		0x80
+#define CCW_FLAG_CC		0x40
+#define CCW_FLAG_SLI		0x20
+#define CCW_FLAG_SKIP		0x10
+#define CCW_FLAG_PCI		0x08
+#define CCW_FLAG_IDA		0x04
+#define CCW_FLAG_SUSPEND	0x02
+
+#define CCW_CMD_READ_IPL	0x02
+#define CCW_CMD_NOOP		0x03
+#define CCW_CMD_BASIC_SENSE	0x04
+#define CCW_CMD_TIC		0x08
+#define CCW_CMD_STLCK           0x14
+#define CCW_CMD_SENSE_PGID	0x34
+#define CCW_CMD_SUSPEND_RECONN	0x5B
+#define CCW_CMD_RDC		0x64
+#define CCW_CMD_RELEASE		0x94
+#define CCW_CMD_SET_PGID	0xAF
+#define CCW_CMD_SENSE_ID	0xE4
+#define CCW_CMD_DCTL		0xF3
+
+#define SENSE_MAX_COUNT		0x20
+
+/**
+ * struct erw - extended report word
+ * @res0: reserved
+ * @auth: authorization check
+ * @pvrf: path-verification-required flag
+ * @cpt: channel-path timeout
+ * @fsavf: failing storage address validity flag
+ * @cons: concurrent sense
+ * @scavf: secondary ccw address validity flag
+ * @fsaf: failing storage address format
+ * @scnt: sense count, if @cons == %1
+ * @res16: reserved
+ */
+struct erw {
+	__u32 res0  : 3;
+	__u32 auth  : 1;
+	__u32 pvrf  : 1;
+	__u32 cpt   : 1;
+	__u32 fsavf : 1;
+	__u32 cons  : 1;
+	__u32 scavf : 1;
+	__u32 fsaf  : 1;
+	__u32 scnt  : 6;
+	__u32 res16 : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct sublog - subchannel logout area
+ * @res0: reserved
+ * @esf: extended status flags
+ * @lpum: last path used mask
+ * @arep: ancillary report
+ * @fvf: field-validity flags
+ * @sacc: storage access code
+ * @termc: termination code
+ * @devsc: device-status check
+ * @serr: secondary error
+ * @ioerr: i/o-error alert
+ * @seqc: sequence code
+ */
+struct sublog {
+	__u32 res0  : 1;
+	__u32 esf   : 7;
+	__u32 lpum  : 8;
+	__u32 arep  : 1;
+	__u32 fvf   : 5;
+	__u32 sacc  : 2;
+	__u32 termc : 2;
+	__u32 devsc : 1;
+	__u32 serr  : 1;
+	__u32 ioerr : 1;
+	__u32 seqc  : 3;
+} __attribute__ ((packed));
+
+/**
+ * struct esw0 - Format 0 Extended Status Word (ESW)
+ * @sublog: subchannel logout
+ * @erw: extended report word
+ * @faddr: failing storage address
+ * @saddr: secondary ccw address
+ */
+struct esw0 {
+	struct sublog sublog;
+	struct erw erw;
+	__u32  faddr[2];
+	__u32  saddr;
+} __attribute__ ((packed));
+
+/**
+ * struct esw1 - Format 1 Extended Status Word (ESW)
+ * @zero0: reserved zeros
+ * @lpum: last path used mask
+ * @zero16: reserved zeros
+ * @erw: extended report word
+ * @zeros: three fullwords of zeros
+ */
+struct esw1 {
+	__u8  zero0;
+	__u8  lpum;
+	__u16 zero16;
+	struct erw erw;
+	__u32 zeros[3];
+} __attribute__ ((packed));
+
+/**
+ * struct esw2 - Format 2 Extended Status Word (ESW)
+ * @zero0: reserved zeros
+ * @lpum: last path used mask
+ * @dcti: device-connect-time interval
+ * @erw: extended report word
+ * @zeros: three fullwords of zeros
+ */
+struct esw2 {
+	__u8  zero0;
+	__u8  lpum;
+	__u16 dcti;
+	struct erw erw;
+	__u32 zeros[3];
+} __attribute__ ((packed));
+
+/**
+ * struct esw3 - Format 3 Extended Status Word (ESW)
+ * @zero0: reserved zeros
+ * @lpum: last path used mask
+ * @res: reserved
+ * @erw: extended report word
+ * @zeros: three fullwords of zeros
+ */
+struct esw3 {
+	__u8  zero0;
+	__u8  lpum;
+	__u16 res;
+	struct erw erw;
+	__u32 zeros[3];
+} __attribute__ ((packed));
+
+/**
+ * struct irb - interruption response block
+ * @scsw: subchannel status word
+ * @esw: extened status word, 4 formats
+ * @ecw: extended control word
+ *
+ * The irb that is handed to the device driver when an interrupt occurs. For
+ * solicited interrupts, the common I/O layer already performs checks whether
+ * a field is valid; a field not being valid is always passed as %0.
+ * If a unit check occured, @ecw may contain sense data; this is retrieved
+ * by the common I/O layer itself if the device doesn't support concurrent
+ * sense (so that the device driver never needs to perform basic sene itself).
+ * For unsolicited interrupts, the irb is passed as-is (expect for sense data,
+ * if applicable).
+ */
+struct irb {
+	union scsw scsw;
+	union {
+		struct esw0 esw0;
+		struct esw1 esw1;
+		struct esw2 esw2;
+		struct esw3 esw3;
+	} esw;
+	__u8   ecw[32];
+} __attribute__ ((packed,aligned(4)));
+
+/**
+ * struct ciw - command information word  (CIW) layout
+ * @et: entry type
+ * @reserved: reserved bits
+ * @ct: command type
+ * @cmd: command code
+ * @count: command count
+ */
+struct ciw {
+	__u32 et       :  2;
+	__u32 reserved :  2;
+	__u32 ct       :  4;
+	__u32 cmd      :  8;
+	__u32 count    : 16;
+} __attribute__ ((packed));
+
+#define CIW_TYPE_RCD	0x0    	/* read configuration data */
+#define CIW_TYPE_SII	0x1    	/* set interface identifier */
+#define CIW_TYPE_RNI	0x2    	/* read node identifier */
+
+/*
+ * Flags used as input parameters for do_IO()
+ */
+#define DOIO_ALLOW_SUSPEND	 0x0001 /* allow for channel prog. suspend */
+#define DOIO_DENY_PREFETCH	 0x0002 /* don't allow for CCW prefetch */
+#define DOIO_SUPPRESS_INTER	 0x0004 /* suppress intermediate inter. */
+					/* ... for suspended CCWs */
+/* Device or subchannel gone. */
+#define CIO_GONE       0x0001
+/* No path to device. */
+#define CIO_NO_PATH    0x0002
+/* Device has appeared. */
+#define CIO_OPER       0x0004
+/* Sick revalidation of device. */
+#define CIO_REVALIDATE 0x0008
+
+/**
+ * struct ccw_dev_id - unique identifier for ccw devices
+ * @ssid: subchannel set id
+ * @devno: device number
+ *
+ * This structure is not directly based on any hardware structure. The
+ * hardware identifies a device by its device number and its subchannel,
+ * which is in turn identified by its id. In order to get a unique identifier
+ * for ccw devices across subchannel sets, @struct ccw_dev_id has been
+ * introduced.
+ */
+struct ccw_dev_id {
+	u8 ssid;
+	u16 devno;
+};
+
+/**
+ * ccw_device_id_is_equal() - compare two ccw_dev_ids
+ * @dev_id1: a ccw_dev_id
+ * @dev_id2: another ccw_dev_id
+ * Returns:
+ *  %1 if the two structures are equal field-by-field,
+ *  %0 if not.
+ * Context:
+ *  any
+ */
+static inline int ccw_dev_id_is_equal(struct ccw_dev_id *dev_id1,
+				      struct ccw_dev_id *dev_id2)
+{
+	if ((dev_id1->ssid == dev_id2->ssid) &&
+	    (dev_id1->devno == dev_id2->devno))
+		return 1;
+	return 0;
+}
+
+extern void wait_cons_dev(void);
+
+extern void css_schedule_reprobe(void);
+
+extern void reipl_ccw_dev(struct ccw_dev_id *id);
+
+struct cio_iplinfo {
+	u16 devno;
+	int is_qdio;
+};
+
+extern int cio_get_iplinfo(struct cio_iplinfo *iplinfo);
+
+/* Function from drivers/s390/cio/chsc.c */
+int chsc_sstpc(void *page, unsigned int op, u16 ctrl);
+int chsc_sstpi(void *page, void *result, size_t size);
+
+#endif
+
+#endif
diff --git a/arch/s390/include/asm/cmb.h b/arch/s390/include/asm/cmb.h
new file mode 100644
index 00000000000..50196857d27
--- /dev/null
+++ b/arch/s390/include/asm/cmb.h
@@ -0,0 +1,58 @@
+#ifndef S390_CMB_H
+#define S390_CMB_H
+/**
+ * struct cmbdata - channel measurement block data for user space
+ * @size: size of the stored data
+ * @elapsed_time: time since last sampling
+ * @ssch_rsch_count: number of ssch and rsch
+ * @sample_count: number of samples
+ * @device_connect_time: time of device connect
+ * @function_pending_time: time of function pending
+ * @device_disconnect_time: time of device disconnect
+ * @control_unit_queuing_time: time of control unit queuing
+ * @device_active_only_time: time of device active only
+ * @device_busy_time: time of device busy (ext. format)
+ * @initial_command_response_time: initial command response time (ext. format)
+ *
+ * All values are stored as 64 bit for simplicity, especially
+ * in 32 bit emulation mode. All time values are normalized to
+ * nanoseconds.
+ * Currently, two formats are known, which differ by the size of
+ * this structure, i.e. the last two members are only set when
+ * the extended channel measurement facility (first shipped in
+ * z990 machines) is activated.
+ * Potentially, more fields could be added, which would result in a
+ * new ioctl number.
+ */
+struct cmbdata {
+	__u64 size;
+	__u64 elapsed_time;
+ /* basic and exended format: */
+	__u64 ssch_rsch_count;
+	__u64 sample_count;
+	__u64 device_connect_time;
+	__u64 function_pending_time;
+	__u64 device_disconnect_time;
+	__u64 control_unit_queuing_time;
+	__u64 device_active_only_time;
+ /* extended format only: */
+	__u64 device_busy_time;
+	__u64 initial_command_response_time;
+};
+
+/* enable channel measurement */
+#define BIODASDCMFENABLE	_IO(DASD_IOCTL_LETTER, 32)
+/* enable channel measurement */
+#define BIODASDCMFDISABLE	_IO(DASD_IOCTL_LETTER, 33)
+/* read channel measurement data */
+#define BIODASDREADALLCMB	_IOWR(DASD_IOCTL_LETTER, 33, struct cmbdata)
+
+#ifdef __KERNEL__
+struct ccw_device;
+extern int enable_cmf(struct ccw_device *cdev);
+extern int disable_cmf(struct ccw_device *cdev);
+extern u64 cmf_read(struct ccw_device *cdev, int index);
+extern int cmf_readall(struct ccw_device *cdev, struct cmbdata *data);
+
+#endif /* __KERNEL__ */
+#endif /* S390_CMB_H */
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
new file mode 100644
index 00000000000..de065b32381
--- /dev/null
+++ b/arch/s390/include/asm/compat.h
@@ -0,0 +1,233 @@
+#ifndef _ASM_S390X_COMPAT_H
+#define _ASM_S390X_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define PSW32_MASK_PER		0x40000000UL
+#define PSW32_MASK_DAT		0x04000000UL
+#define PSW32_MASK_IO		0x02000000UL
+#define PSW32_MASK_EXT		0x01000000UL
+#define PSW32_MASK_KEY		0x00F00000UL
+#define PSW32_MASK_MCHECK	0x00040000UL
+#define PSW32_MASK_WAIT		0x00020000UL
+#define PSW32_MASK_PSTATE	0x00010000UL
+#define PSW32_MASK_ASC		0x0000C000UL
+#define PSW32_MASK_CC		0x00003000UL
+#define PSW32_MASK_PM		0x00000f00UL
+
+#define PSW32_ADDR_AMODE31	0x80000000UL
+#define PSW32_ADDR_INSN		0x7FFFFFFFUL
+
+#define PSW32_BASE_BITS		0x00080000UL
+
+#define PSW32_ASC_PRIMARY	0x00000000UL
+#define PSW32_ASC_ACCREG	0x00004000UL
+#define PSW32_ASC_SECONDARY	0x00008000UL
+#define PSW32_ASC_HOME		0x0000C000UL
+
+#define PSW32_MASK_MERGE(CURRENT,NEW) \
+	(((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \
+	 ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM)))
+
+extern long psw32_user_bits;
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64       12
+#define F_SETLK64       13
+#define F_SETLKW64      14    
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	s32		f_type;
+	s32		f_bsize;
+	s32		f_blocks;
+	s32		f_bfree;
+	s32		f_bavail;
+	s32		f_files;
+	s32		f_ffree;
+	compat_fsid_t	f_fsid;
+	s32		f_namelen;
+	s32		f_frsize;
+	s32		f_spare[6];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)(uptr & 0x7fffffffUL);
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	unsigned long stack;
+
+	stack = KSTK_ESP(current);
+	if (test_thread_flag(TIF_31BIT))
+		stack &= 0x7fffffffUL;
+	return (void __user *) (stack - len);
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	compat_mode_t mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	unsigned int __unused1;
+	unsigned int __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __pad1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __pad2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t   msg_stime;
+	compat_ulong_t __pad1;
+	compat_time_t   msg_rtime;
+	compat_ulong_t __pad2;
+	compat_time_t   msg_ctime;
+	compat_ulong_t __pad3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __pad1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __pad2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __pad3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+#endif /* _ASM_S390X_COMPAT_H */
diff --git a/arch/s390/include/asm/cpcmd.h b/arch/s390/include/asm/cpcmd.h
new file mode 100644
index 00000000000..48a9eab1642
--- /dev/null
+++ b/arch/s390/include/asm/cpcmd.h
@@ -0,0 +1,34 @@
+/*
+ *  arch/s390/kernel/cpcmd.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Christian Borntraeger (cborntra@de.ibm.com),
+ */
+
+#ifndef _ASM_S390_CPCMD_H
+#define _ASM_S390_CPCMD_H
+
+/*
+ * the lowlevel function for cpcmd
+ * the caller of __cpcmd has to ensure that the response buffer is below 2 GB
+ */
+extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code);
+
+/*
+ * cpcmd is the in-kernel interface for issuing CP commands
+ *
+ * cmd:		null-terminated command string, max 240 characters
+ * response:	response buffer for VM's textual response
+ * rlen:	size of the response buffer, cpcmd will not exceed this size
+ *		but will cap the output, if its too large. Everything that
+ *		did not fit into the buffer will be silently dropped
+ * response_code: return pointer for VM's error code
+ * return value: the size of the response. The caller can check if the buffer
+ *		was large enough by comparing the return value and rlen
+ * NOTE: If the response buffer is not below 2 GB, cpcmd can sleep
+ */
+extern int cpcmd(const char *cmd, char *response, int rlen, int *response_code);
+
+#endif /* _ASM_S390_CPCMD_H */
diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
new file mode 100644
index 00000000000..e5a6a9ba3ad
--- /dev/null
+++ b/arch/s390/include/asm/cpu.h
@@ -0,0 +1,33 @@
+/*
+ *  include/asm-s390/cpu.h
+ *
+ *    Copyright IBM Corp. 2007
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CPU_H_
+#define _ASM_S390_CPU_H_
+
+#include <linux/types.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
+
+struct s390_idle_data {
+	spinlock_t lock;
+	unsigned int in_idle;
+	unsigned long long idle_count;
+	unsigned long long idle_enter;
+	unsigned long long idle_time;
+};
+
+DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
+
+void s390_idle_leave(void);
+
+static inline void s390_idle_check(void)
+{
+	if ((&__get_cpu_var(s390_idle))->in_idle)
+		s390_idle_leave();
+}
+
+#endif /* _ASM_S390_CPU_H_ */
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
new file mode 100644
index 00000000000..133ce054fc8
--- /dev/null
+++ b/arch/s390/include/asm/cputime.h
@@ -0,0 +1,177 @@
+/*
+ *  include/asm-s390/cputime.h
+ *
+ *  (C) Copyright IBM Corp. 2004
+ *
+ *  Author: Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _S390_CPUTIME_H
+#define _S390_CPUTIME_H
+
+#include <asm/div64.h>
+
+/* We want to use micro-second resolution. */
+
+typedef unsigned long long cputime_t;
+typedef unsigned long long cputime64_t;
+
+#ifndef __s390x__
+
+static inline unsigned int
+__div(unsigned long long n, unsigned int base)
+{
+	register_pair rp;
+
+	rp.pair = n >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1));
+	return rp.subreg.odd;
+}
+
+#else /* __s390x__ */
+
+static inline unsigned int
+__div(unsigned long long n, unsigned int base)
+{
+	return n / base;
+}
+
+#endif /* __s390x__ */
+
+#define cputime_zero			(0ULL)
+#define cputime_max			((~0UL >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n) ({		\
+	unsigned long long __div = (__a);	\
+	do_div(__div,__n);			\
+	__div;					\
+})
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+#define cputime_to_jiffies(__ct)	(__div((__ct), 1000000 / HZ))
+#define cputime_to_scaled(__ct)		(__ct)
+#define jiffies_to_cputime(__hz)	((cputime_t)(__hz) * (1000000 / HZ))
+
+#define cputime64_zero			(0ULL)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+static inline u64
+cputime64_to_jiffies64(cputime64_t cputime)
+{
+	do_div(cputime, 1000000 / HZ);
+	return cputime;
+}
+
+/*
+ * Convert cputime to milliseconds and back.
+ */
+static inline unsigned int
+cputime_to_msecs(const cputime_t cputime)
+{
+	return __div(cputime, 1000);
+}
+
+static inline cputime_t
+msecs_to_cputime(const unsigned int m)
+{
+	return (cputime_t) m * 1000;
+}
+
+/*
+ * Convert cputime to milliseconds and back.
+ */
+static inline unsigned int
+cputime_to_secs(const cputime_t cputime)
+{
+	return __div(cputime, 1000000);
+}
+
+static inline cputime_t
+secs_to_cputime(const unsigned int s)
+{
+	return (cputime_t) s * 1000000;
+}
+
+/*
+ * Convert cputime to timespec and back.
+ */
+static inline cputime_t
+timespec_to_cputime(const struct timespec *value)
+{
+        return value->tv_nsec / 1000 + (u64) value->tv_sec * 1000000;
+}
+
+static inline void
+cputime_to_timespec(const cputime_t cputime, struct timespec *value)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.pair = cputime >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1));
+	value->tv_nsec = rp.subreg.even * 1000;
+	value->tv_sec = rp.subreg.odd;
+#else
+	value->tv_nsec = (cputime % 1000000) * 1000;
+	value->tv_sec = cputime / 1000000;
+#endif
+}
+
+/*
+ * Convert cputime to timeval and back.
+ * Since cputime and timeval have the same resolution (microseconds)
+ * this is easy.
+ */
+static inline cputime_t
+timeval_to_cputime(const struct timeval *value)
+{
+        return value->tv_usec + (u64) value->tv_sec * 1000000;
+}
+
+static inline void
+cputime_to_timeval(const cputime_t cputime, struct timeval *value)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.pair = cputime >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1));
+	value->tv_usec = rp.subreg.even;
+	value->tv_sec = rp.subreg.odd;
+#else
+	value->tv_usec = cputime % 1000000;
+	value->tv_sec = cputime / 1000000;
+#endif
+}
+
+/*
+ * Convert cputime to clock and back.
+ */
+static inline clock_t
+cputime_to_clock_t(cputime_t cputime)
+{
+	return __div(cputime, 1000000 / USER_HZ);
+}
+
+static inline cputime_t
+clock_t_to_cputime(unsigned long x)
+{
+	return (cputime_t) x * (1000000 / USER_HZ);
+}
+
+/*
+ * Convert cputime64 to clock.
+ */
+static inline clock_t
+cputime64_to_clock_t(cputime64_t cputime)
+{
+       return __div(cputime, 1000000 / USER_HZ);
+}
+
+#endif /* _S390_CPUTIME_H */
diff --git a/arch/s390/include/asm/current.h b/arch/s390/include/asm/current.h
new file mode 100644
index 00000000000..83cf36cde2d
--- /dev/null
+++ b/arch/s390/include/asm/current.h
@@ -0,0 +1,23 @@
+/*
+ *  include/asm-s390/current.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/current.h"
+ */
+
+#ifndef _S390_CURRENT_H
+#define _S390_CURRENT_H
+
+#ifdef __KERNEL__
+#include <asm/lowcore.h>
+
+struct task_struct;
+
+#define current ((struct task_struct *const)S390_lowcore.current_task)
+
+#endif
+
+#endif /* !(_S390_CURRENT_H) */
diff --git a/arch/s390/include/asm/dasd.h b/arch/s390/include/asm/dasd.h
new file mode 100644
index 00000000000..3f002e13d02
--- /dev/null
+++ b/arch/s390/include/asm/dasd.h
@@ -0,0 +1,270 @@
+/* 
+ * File...........: linux/drivers/s390/block/dasd.c
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ *
+ * This file is the interface of the DASD device driver, which is exported to user space
+ * any future changes wrt the API will result in a change of the APIVERSION reported
+ * to userspace by the DASDAPIVER-ioctl
+ *
+ */
+
+#ifndef DASD_H
+#define DASD_H
+#include <linux/ioctl.h>
+
+#define DASD_IOCTL_LETTER 'D'
+
+#define DASD_API_VERSION 6
+
+/* 
+ * struct dasd_information2_t
+ * represents any data about the device, which is visible to userspace.
+ *  including foramt and featueres.
+ */
+typedef struct dasd_information2_t {
+        unsigned int devno;         /* S/390 devno */
+        unsigned int real_devno;    /* for aliases */
+        unsigned int schid;         /* S/390 subchannel identifier */
+        unsigned int cu_type  : 16; /* from SenseID */
+        unsigned int cu_model :  8; /* from SenseID */
+        unsigned int dev_type : 16; /* from SenseID */
+        unsigned int dev_model : 8; /* from SenseID */
+        unsigned int open_count; 
+        unsigned int req_queue_len; 
+        unsigned int chanq_len;     /* length of chanq */
+        char type[4];               /* from discipline.name, 'none' for unknown */
+        unsigned int status;        /* current device level */
+        unsigned int label_block;   /* where to find the VOLSER */
+        unsigned int FBA_layout;    /* fixed block size (like AIXVOL) */
+        unsigned int characteristics_size;
+        unsigned int confdata_size;
+        char characteristics[64];   /* from read_device_characteristics */
+        char configuration_data[256]; /* from read_configuration_data */
+        unsigned int format;          /* format info like formatted/cdl/ldl/... */
+        unsigned int features;        /* dasd features like 'ro',...            */
+        unsigned int reserved0;       /* reserved for further use ,...          */
+        unsigned int reserved1;       /* reserved for further use ,...          */
+        unsigned int reserved2;       /* reserved for further use ,...          */
+        unsigned int reserved3;       /* reserved for further use ,...          */
+        unsigned int reserved4;       /* reserved for further use ,...          */
+        unsigned int reserved5;       /* reserved for further use ,...          */
+        unsigned int reserved6;       /* reserved for further use ,...          */
+        unsigned int reserved7;       /* reserved for further use ,...          */
+} dasd_information2_t;
+
+/*
+ * values to be used for dasd_information_t.format
+ * 0x00: NOT formatted
+ * 0x01: Linux disc layout
+ * 0x02: Common disc layout
+ */
+#define DASD_FORMAT_NONE 0
+#define DASD_FORMAT_LDL  1
+#define DASD_FORMAT_CDL  2
+/*
+ * values to be used for dasd_information_t.features
+ * 0x00: default features
+ * 0x01: readonly (ro)
+ * 0x02: use diag discipline (diag)
+ * 0x04: set the device initially online (internal use only)
+ * 0x08: enable ERP related logging
+ */
+#define DASD_FEATURE_DEFAULT	     0x00
+#define DASD_FEATURE_READONLY	     0x01
+#define DASD_FEATURE_USEDIAG	     0x02
+#define DASD_FEATURE_INITIAL_ONLINE  0x04
+#define DASD_FEATURE_ERPLOG	     0x08
+
+#define DASD_PARTN_BITS 2
+
+/* 
+ * struct dasd_information_t
+ * represents any data about the data, which is visible to userspace
+ */
+typedef struct dasd_information_t {
+        unsigned int devno;         /* S/390 devno */
+        unsigned int real_devno;    /* for aliases */
+        unsigned int schid;         /* S/390 subchannel identifier */
+        unsigned int cu_type  : 16; /* from SenseID */
+        unsigned int cu_model :  8; /* from SenseID */
+        unsigned int dev_type : 16; /* from SenseID */
+        unsigned int dev_model : 8; /* from SenseID */
+        unsigned int open_count; 
+        unsigned int req_queue_len; 
+        unsigned int chanq_len;     /* length of chanq */
+        char type[4];               /* from discipline.name, 'none' for unknown */
+        unsigned int status;        /* current device level */
+        unsigned int label_block;   /* where to find the VOLSER */
+        unsigned int FBA_layout;    /* fixed block size (like AIXVOL) */
+        unsigned int characteristics_size;
+        unsigned int confdata_size;
+        char characteristics[64];   /* from read_device_characteristics */
+        char configuration_data[256]; /* from read_configuration_data */
+} dasd_information_t;
+
+/*
+ * Read Subsystem Data - Performance Statistics
+ */ 
+typedef struct dasd_rssd_perf_stats_t {
+	unsigned char  invalid:1;
+	unsigned char  format:3;
+	unsigned char  data_format:4;
+	unsigned char  unit_address;
+	unsigned short device_status;
+	unsigned int   nr_read_normal;
+	unsigned int   nr_read_normal_hits;
+	unsigned int   nr_write_normal;
+	unsigned int   nr_write_fast_normal_hits;
+	unsigned int   nr_read_seq;
+	unsigned int   nr_read_seq_hits;
+	unsigned int   nr_write_seq;
+	unsigned int   nr_write_fast_seq_hits;
+	unsigned int   nr_read_cache;
+	unsigned int   nr_read_cache_hits;
+	unsigned int   nr_write_cache;
+	unsigned int   nr_write_fast_cache_hits;
+	unsigned int   nr_inhibit_cache;
+	unsigned int   nr_bybass_cache;
+	unsigned int   nr_seq_dasd_to_cache;
+	unsigned int   nr_dasd_to_cache;
+	unsigned int   nr_cache_to_dasd;
+	unsigned int   nr_delayed_fast_write;
+	unsigned int   nr_normal_fast_write;
+	unsigned int   nr_seq_fast_write;
+	unsigned int   nr_cache_miss;
+	unsigned char  status2;
+	unsigned int   nr_quick_write_promotes;
+	unsigned char  reserved;
+	unsigned short ssid;
+	unsigned char  reseved2[96];
+} __attribute__((packed)) dasd_rssd_perf_stats_t;
+
+/* 
+ * struct profile_info_t
+ * holds the profinling information 
+ */
+typedef struct dasd_profile_info_t {
+        unsigned int dasd_io_reqs;	 /* number of requests processed at all */
+        unsigned int dasd_io_sects;	 /* number of sectors processed at all */
+        unsigned int dasd_io_secs[32];	 /* histogram of request's sizes */
+        unsigned int dasd_io_times[32];	 /* histogram of requests's times */
+        unsigned int dasd_io_timps[32];	 /* histogram of requests's times per sector */
+        unsigned int dasd_io_time1[32];	 /* histogram of time from build to start */
+        unsigned int dasd_io_time2[32];	 /* histogram of time from start to irq */
+        unsigned int dasd_io_time2ps[32]; /* histogram of time from start to irq */
+        unsigned int dasd_io_time3[32];	 /* histogram of time from irq to end */
+        unsigned int dasd_io_nr_req[32]; /* histogram of # of requests in chanq */
+} dasd_profile_info_t;
+
+/* 
+ * struct format_data_t
+ * represents all data necessary to format a dasd
+ */
+typedef struct format_data_t {
+	int start_unit; /* from track */
+	int stop_unit;  /* to track */
+	int blksize;    /* sectorsize */
+        int intensity;  
+} format_data_t;
+
+/*
+ * values to be used for format_data_t.intensity
+ * 0/8: normal format
+ * 1/9: also write record zero
+ * 3/11: also write home address
+ * 4/12: invalidate track
+ */
+#define DASD_FMT_INT_FMT_R0 1 /* write record zero */
+#define DASD_FMT_INT_FMT_HA 2 /* write home address, also set FMT_R0 ! */
+#define DASD_FMT_INT_INVAL  4 /* invalidate tracks */
+#define DASD_FMT_INT_COMPAT 8 /* use OS/390 compatible disk layout */
+
+
+/* 
+ * struct attrib_data_t
+ * represents the operation (cache) bits for the device.
+ * Used in DE to influence caching of the DASD.
+ */
+typedef struct attrib_data_t {
+	unsigned char operation:3;     /* cache operation mode */
+	unsigned char reserved:5;      /* cache operation mode */
+	__u16         nr_cyl;          /* no of cyliners for read ahaed */
+	__u8          reserved2[29];   /* for future use */
+} __attribute__ ((packed)) attrib_data_t;
+
+/* definition of operation (cache) bits within attributes of DE */
+#define DASD_NORMAL_CACHE  0x0
+#define DASD_BYPASS_CACHE  0x1
+#define DASD_INHIBIT_LOAD  0x2
+#define DASD_SEQ_ACCESS    0x3
+#define DASD_SEQ_PRESTAGE  0x4
+#define DASD_REC_ACCESS    0x5
+
+
+/********************************************************************************
+ * SECTION: Definition of IOCTLs
+ *
+ * Here ist how the ioctl-nr should be used:
+ *    0 -   31   DASD driver itself
+ *   32 -  239   still open
+ *  240 -  255   reserved for EMC 
+ *******************************************************************************/
+
+/* Disable the volume (for Linux) */
+#define BIODASDDISABLE _IO(DASD_IOCTL_LETTER,0) 
+/* Enable the volume (for Linux) */
+#define BIODASDENABLE  _IO(DASD_IOCTL_LETTER,1)  
+/* Issue a reserve/release command, rsp. */
+#define BIODASDRSRV    _IO(DASD_IOCTL_LETTER,2) /* reserve */
+#define BIODASDRLSE    _IO(DASD_IOCTL_LETTER,3) /* release */
+#define BIODASDSLCK    _IO(DASD_IOCTL_LETTER,4) /* steal lock */
+/* reset profiling information of a device */
+#define BIODASDPRRST   _IO(DASD_IOCTL_LETTER,5)
+/* Quiesce IO on device */
+#define BIODASDQUIESCE _IO(DASD_IOCTL_LETTER,6) 
+/* Resume IO on device */
+#define BIODASDRESUME  _IO(DASD_IOCTL_LETTER,7) 
+
+
+/* retrieve API version number */
+#define DASDAPIVER     _IOR(DASD_IOCTL_LETTER,0,int)
+/* Get information on a dasd device */
+#define BIODASDINFO    _IOR(DASD_IOCTL_LETTER,1,dasd_information_t)
+/* retrieve profiling information of a device */
+#define BIODASDPRRD    _IOR(DASD_IOCTL_LETTER,2,dasd_profile_info_t)
+/* Get information on a dasd device (enhanced) */
+#define BIODASDINFO2   _IOR(DASD_IOCTL_LETTER,3,dasd_information2_t)
+/* Performance Statistics Read */
+#define BIODASDPSRD    _IOR(DASD_IOCTL_LETTER,4,dasd_rssd_perf_stats_t)
+/* Get Attributes (cache operations) */
+#define BIODASDGATTR   _IOR(DASD_IOCTL_LETTER,5,attrib_data_t) 
+
+
+/* #define BIODASDFORMAT  _IOW(IOCTL_LETTER,0,format_data_t) , deprecated */
+#define BIODASDFMT     _IOW(DASD_IOCTL_LETTER,1,format_data_t) 
+/* Set Attributes (cache operations) */
+#define BIODASDSATTR   _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) 
+
+
+#endif				/* DASD_H */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4 
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
new file mode 100644
index 00000000000..9450ce6e32d
--- /dev/null
+++ b/arch/s390/include/asm/debug.h
@@ -0,0 +1,261 @@
+/*
+ *  include/asm-s390/debug.h
+ *   S/390 debug facility
+ *
+ *    Copyright (C) 1999, 2000 IBM Deutschland Entwicklung GmbH,
+ *                             IBM Corporation
+ */
+
+#ifndef DEBUG_H
+#define DEBUG_H
+
+#include <linux/fs.h>
+
+/* Note:
+ * struct __debug_entry must be defined outside of #ifdef __KERNEL__ 
+ * in order to allow a user program to analyze the 'raw'-view.
+ */
+
+struct __debug_entry{
+        union {
+                struct {
+                        unsigned long long clock:52;
+                        unsigned long long exception:1;
+                        unsigned long long level:3;
+                        unsigned long long cpuid:8;
+                } fields;
+
+                unsigned long long stck;
+        } id;
+        void* caller;
+} __attribute__((packed));
+
+
+#define __DEBUG_FEATURE_VERSION      2  /* version of debug feature */
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+
+#define DEBUG_MAX_LEVEL            6  /* debug levels range from 0 to 6 */
+#define DEBUG_OFF_LEVEL            -1 /* level where debug is switched off */
+#define DEBUG_FLUSH_ALL            -1 /* parameter to flush all areas */
+#define DEBUG_MAX_VIEWS            10 /* max number of views in proc fs */
+#define DEBUG_MAX_NAME_LEN         64 /* max length for a debugfs file name */
+#define DEBUG_DEFAULT_LEVEL        3  /* initial debug level */
+
+#define DEBUG_DIR_ROOT "s390dbf" /* name of debug root directory in proc fs */
+
+#define DEBUG_DATA(entry) (char*)(entry + 1) /* data is stored behind */
+                                             /* the entry information */
+
+typedef struct __debug_entry debug_entry_t;
+
+struct debug_view;
+
+typedef struct debug_info {	
+	struct debug_info* next;
+	struct debug_info* prev;
+	atomic_t ref_count;
+	spinlock_t lock;			
+	int level;
+	int nr_areas;
+	int pages_per_area;
+	int buf_size;
+	int entry_size;	
+	debug_entry_t*** areas;
+	int active_area;
+	int *active_pages;
+	int *active_entries;
+	struct dentry* debugfs_root_entry;
+	struct dentry* debugfs_entries[DEBUG_MAX_VIEWS];
+	struct debug_view* views[DEBUG_MAX_VIEWS];	
+	char name[DEBUG_MAX_NAME_LEN];
+	mode_t mode;
+} debug_info_t;
+
+typedef int (debug_header_proc_t) (debug_info_t* id,
+				   struct debug_view* view,
+				   int area,
+				   debug_entry_t* entry,
+				   char* out_buf);
+
+typedef int (debug_format_proc_t) (debug_info_t* id,
+				   struct debug_view* view, char* out_buf,
+				   const char* in_buf);
+typedef int (debug_prolog_proc_t) (debug_info_t* id,
+				   struct debug_view* view,
+				   char* out_buf);
+typedef int (debug_input_proc_t) (debug_info_t* id,
+				  struct debug_view* view,
+				  struct file* file,
+				  const char __user *user_buf,
+				  size_t in_buf_size, loff_t* offset);
+
+int debug_dflt_header_fn(debug_info_t* id, struct debug_view* view,
+		         int area, debug_entry_t* entry, char* out_buf);						
+				
+struct debug_view {
+	char name[DEBUG_MAX_NAME_LEN];
+	debug_prolog_proc_t* prolog_proc;
+	debug_header_proc_t* header_proc;
+	debug_format_proc_t* format_proc;
+	debug_input_proc_t*  input_proc;
+	void*                private_data;
+};
+
+extern struct debug_view debug_hex_ascii_view;
+extern struct debug_view debug_raw_view;
+extern struct debug_view debug_sprintf_view;
+
+/* do NOT use the _common functions */
+
+debug_entry_t* debug_event_common(debug_info_t* id, int level, 
+                                  const void* data, int length);
+
+debug_entry_t* debug_exception_common(debug_info_t* id, int level, 
+                                      const void* data, int length);
+
+/* Debug Feature API: */
+
+debug_info_t *debug_register(const char *name, int pages, int nr_areas,
+                             int buf_size);
+
+debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas,
+				  int buf_size, mode_t mode, uid_t uid,
+				  gid_t gid);
+
+void debug_unregister(debug_info_t* id);
+
+void debug_set_level(debug_info_t* id, int new_level);
+
+void debug_stop_all(void);
+
+static inline debug_entry_t*
+debug_event(debug_info_t* id, int level, void* data, int length)
+{
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_event_common(id,level,data,length);
+}
+
+static inline debug_entry_t*
+debug_int_event(debug_info_t* id, int level, unsigned int tag)
+{
+        unsigned int t=tag;
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_event_common(id,level,&t,sizeof(unsigned int));
+}
+
+static inline debug_entry_t *
+debug_long_event (debug_info_t* id, int level, unsigned long tag)
+{
+        unsigned long t=tag;
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_event_common(id,level,&t,sizeof(unsigned long));
+}
+
+static inline debug_entry_t*
+debug_text_event(debug_info_t* id, int level, const char* txt)
+{
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_event_common(id,level,txt,strlen(txt));
+}
+
+extern debug_entry_t *
+debug_sprintf_event(debug_info_t* id,int level,char *string,...)
+	__attribute__ ((format(printf, 3, 4)));
+
+
+static inline debug_entry_t*
+debug_exception(debug_info_t* id, int level, void* data, int length)
+{
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_exception_common(id,level,data,length);
+}
+
+static inline debug_entry_t*
+debug_int_exception(debug_info_t* id, int level, unsigned int tag)
+{
+        unsigned int t=tag;
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_exception_common(id,level,&t,sizeof(unsigned int));
+}
+
+static inline debug_entry_t *
+debug_long_exception (debug_info_t* id, int level, unsigned long tag)
+{
+        unsigned long t=tag;
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_exception_common(id,level,&t,sizeof(unsigned long));
+}
+
+static inline debug_entry_t*
+debug_text_exception(debug_info_t* id, int level, const char* txt)
+{
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_exception_common(id,level,txt,strlen(txt));
+}
+
+
+extern debug_entry_t *
+debug_sprintf_exception(debug_info_t* id,int level,char *string,...)
+	__attribute__ ((format(printf, 3, 4)));
+
+int debug_register_view(debug_info_t* id, struct debug_view* view);
+int debug_unregister_view(debug_info_t* id, struct debug_view* view);
+
+/*
+   define the debug levels:
+   - 0 No debugging output to console or syslog
+   - 1 Log internal errors to syslog, ignore check conditions 
+   - 2 Log internal errors and check conditions to syslog
+   - 3 Log internal errors to console, log check conditions to syslog
+   - 4 Log internal errors and check conditions to console
+   - 5 panic on internal errors, log check conditions to console
+   - 6 panic on both, internal errors and check conditions
+ */
+
+#ifndef DEBUG_LEVEL
+#define DEBUG_LEVEL 4
+#endif
+
+#define INTERNAL_ERRMSG(x,y...) "E" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_WRNMSG(x,y...) "W" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_INFMSG(x,y...) "I" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_DEBMSG(x,y...) "D" __FILE__ "%d: " x, __LINE__, y
+
+#if DEBUG_LEVEL > 0
+#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_INFO(x...) printk ( KERN_INFO PRINTK_HEADER x )
+#define PRINT_WARN(x...) printk ( KERN_WARNING PRINTK_HEADER x )
+#define PRINT_ERR(x...) printk ( KERN_ERR PRINTK_HEADER x )
+#define PRINT_FATAL(x...) panic ( PRINTK_HEADER x )
+#else
+#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_INFO(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_WARN(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_ERR(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_FATAL(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#endif				/* DASD_DEBUG */
+
+#undef DEBUG_MALLOC
+#ifdef DEBUG_MALLOC
+void *b;
+#define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b)
+#define kfree(x) PRINT_INFO(" kfree %p\n",x);kfree(x)
+#define get_zeroed_page(x...) (PRINT_INFO(" gfp %p\n",b=get_zeroed_page(x)),b)
+#define __get_free_pages(x...) (PRINT_INFO(" gfps %p\n",b=__get_free_pages(x)),b)
+#endif				/* DEBUG_MALLOC */
+
+#endif				/* __KERNEL__ */
+#endif				/* DEBUG_H */
diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h
new file mode 100644
index 00000000000..78357314c45
--- /dev/null
+++ b/arch/s390/include/asm/delay.h
@@ -0,0 +1,22 @@
+/*
+ *  include/asm-s390/delay.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/delay.h"
+ *    Copyright (C) 1993 Linus Torvalds
+ *
+ *  Delay routines calling functions in arch/s390/lib/delay.c
+ */
+ 
+#ifndef _S390_DELAY_H
+#define _S390_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* defined(_S390_DELAY_H) */
diff --git a/arch/s390/include/asm/device.h b/arch/s390/include/asm/device.h
new file mode 100644
index 00000000000..d8f9872b0e2
--- /dev/null
+++ b/arch/s390/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/s390/include/asm/diag.h b/arch/s390/include/asm/diag.h
new file mode 100644
index 00000000000..72b2e2f2d32
--- /dev/null
+++ b/arch/s390/include/asm/diag.h
@@ -0,0 +1,39 @@
+/*
+ * s390 diagnose functions
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Michael Holzheu <holzheu@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_DIAG_H
+#define _ASM_S390_DIAG_H
+
+/*
+ * Diagnose 10: Release pages
+ */
+extern void diag10(unsigned long addr);
+
+/*
+ * Diagnose 14: Input spool file manipulation
+ */
+extern int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode);
+
+/*
+ * Diagnose 210: Get information about a virtual device
+ */
+struct diag210 {
+	u16 vrdcdvno;	/* device number (input) */
+	u16 vrdclen;	/* data block length (input) */
+	u8 vrdcvcla;	/* virtual device class (output) */
+	u8 vrdcvtyp;	/* virtual device type (output) */
+	u8 vrdcvsta;	/* virtual device status (output) */
+	u8 vrdcvfla;	/* virtual device flags (output) */
+	u8 vrdcrccl;	/* real device class (output) */
+	u8 vrdccrty;	/* real device type (output) */
+	u8 vrdccrmd;	/* real device model (output) */
+	u8 vrdccrft;	/* real device feature (output) */
+} __attribute__((packed, aligned(4)));
+
+extern int diag210(struct diag210 *addr);
+
+#endif /* _ASM_S390_DIAG_H */
diff --git a/arch/s390/include/asm/div64.h b/arch/s390/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/s390/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/s390/include/asm/dma.h b/arch/s390/include/asm/dma.h
new file mode 100644
index 00000000000..7425c6af6cd
--- /dev/null
+++ b/arch/s390/include/asm/dma.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-s390/dma.h
+ *
+ *  S390 version
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/io.h>		/* need byte IO */
+
+#define MAX_DMA_ADDRESS         0x80000000
+
+#define free_dma(x)	do { } while (0)
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/s390/include/asm/ebcdic.h b/arch/s390/include/asm/ebcdic.h
new file mode 100644
index 00000000000..7f6f641d32f
--- /dev/null
+++ b/arch/s390/include/asm/ebcdic.h
@@ -0,0 +1,49 @@
+/*
+ *  include/asm-s390/ebcdic.h
+ *    EBCDIC -> ASCII, ASCII -> EBCDIC conversion routines.
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _EBCDIC_H
+#define _EBCDIC_H
+
+#ifndef _S390_TYPES_H
+#include <types.h>
+#endif
+
+extern __u8 _ascebc_500[256];   /* ASCII -> EBCDIC 500 conversion table */
+extern __u8 _ebcasc_500[256];   /* EBCDIC 500 -> ASCII conversion table */
+extern __u8 _ascebc[256];   /* ASCII -> EBCDIC conversion table */
+extern __u8 _ebcasc[256];   /* EBCDIC -> ASCII conversion table */
+extern __u8 _ebc_tolower[256]; /* EBCDIC -> lowercase */
+extern __u8 _ebc_toupper[256]; /* EBCDIC -> uppercase */
+
+static inline void
+codepage_convert(const __u8 *codepage, volatile __u8 * addr, unsigned long nr)
+{
+	if (nr-- <= 0)
+		return;
+	asm volatile(
+		"	bras	1,1f\n"
+		"	tr	0(1,%0),0(%2)\n"
+		"0:	tr	0(256,%0),0(%2)\n"
+		"	la	%0,256(%0)\n"
+		"1:	ahi	%1,-256\n"
+		"	jnm	0b\n"
+		"	ex	%1,0(1)"
+		: "+&a" (addr), "+&a" (nr)
+		: "a" (codepage) : "cc", "memory", "1");
+}
+
+#define ASCEBC(addr,nr) codepage_convert(_ascebc, addr, nr)
+#define EBCASC(addr,nr) codepage_convert(_ebcasc, addr, nr)
+#define ASCEBC_500(addr,nr) codepage_convert(_ascebc_500, addr, nr)
+#define EBCASC_500(addr,nr) codepage_convert(_ebcasc_500, addr, nr)
+#define EBC_TOLOWER(addr,nr) codepage_convert(_ebc_tolower, addr, nr)
+#define EBC_TOUPPER(addr,nr) codepage_convert(_ebc_toupper, addr, nr)
+
+#endif
+
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
new file mode 100644
index 00000000000..3cad5692381
--- /dev/null
+++ b/arch/s390/include/asm/elf.h
@@ -0,0 +1,196 @@
+/*
+ *  include/asm-s390/elf.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/elf.h"
+ */
+
+#ifndef __ASMS390_ELF_H
+#define __ASMS390_ELF_H
+
+/* s390 relocations defined by the ABIs */
+#define R_390_NONE		0	/* No reloc.  */
+#define R_390_8			1	/* Direct 8 bit.  */
+#define R_390_12		2	/* Direct 12 bit.  */
+#define R_390_16		3	/* Direct 16 bit.  */
+#define R_390_32		4	/* Direct 32 bit.  */
+#define R_390_PC32		5	/* PC relative 32 bit.	*/
+#define R_390_GOT12		6	/* 12 bit GOT offset.  */
+#define R_390_GOT32		7	/* 32 bit GOT offset.  */
+#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
+#define R_390_COPY		9	/* Copy symbol at runtime.  */
+#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
+#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
+#define R_390_RELATIVE		12	/* Adjust by program base.  */
+#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
+#define R_390_GOTPC		14	/* 32 bit PC rel. offset to GOT.  */
+#define R_390_GOT16		15	/* 16 bit GOT offset.  */
+#define R_390_PC16		16	/* PC relative 16 bit.	*/
+#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
+#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
+#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
+#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
+#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
+#define R_390_64		22	/* Direct 64 bit.  */
+#define R_390_PC64		23	/* PC relative 64 bit.	*/
+#define R_390_GOT64		24	/* 64 bit GOT offset.  */
+#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
+#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
+#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
+#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
+#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
+#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
+#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
+#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
+#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
+#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
+#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
+#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
+#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code. */
+#define R_390_TLS_GDCALL	38	/* Tag for function call in general
+                                           dynamic TLS code.  */
+#define R_390_TLS_LDCALL	39	/* Tag for function call in local
+                                           dynamic TLS code.  */
+#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
+                                           thread local data.  */
+#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
+                                           thread local data.  */
+#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
+                                           thread local data in LD code.  */
+#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
+                                           thread local data in LD code.  */
+#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
+                                           static TLS block.  */
+#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
+                                           static TLS block.  */
+#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
+                                           block.  */
+#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
+                                           block.  */
+#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
+#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.  */
+#define R_390_TLS_TPOFF		56	/* Negate offset in static TLS
+                                           block.  */
+#define R_390_20		57	/* Direct 20 bit.  */
+#define R_390_GOT20		58	/* 20 bit GOT offset.  */
+#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
+#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
+					   block offset.  */
+/* Keep this the last entry.  */
+#define R_390_NUM	61
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifndef __s390x__
+#define ELF_CLASS	ELFCLASS32
+#else /* __s390x__ */
+#define ELF_CLASS	ELFCLASS64
+#endif /* __s390x__ */
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_S390
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef s390_fp_regs elf_fpregset_t;
+typedef s390_regs elf_gregset_t;
+
+typedef s390_fp_regs compat_elf_fpregset_t;
+typedef s390_compat_regs compat_elf_gregset_t;
+
+#include <linux/sched.h>	/* for task_struct */
+#include <asm/system.h>		/* for save_access_regs */
+#include <asm/mmu_context.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+	(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
+         && (x)->e_ident[EI_CLASS] == ELF_CLASS) 
+#define compat_elf_check_arch(x) \
+	(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
+	 && (x)->e_ident[EI_CLASS] == ELF_CLASS)
+#define compat_start_thread	start_thread31
+
+/* For SVR4/S390 the function pointer to be registered with `atexit` is
+   passed in R14. */
+#define ELF_PLAT_INIT(_r, load_addr) \
+	do { \
+		_r->gprs[14] = 0; \
+	} while (0)
+
+#define CORE_DUMP_USE_REGSET
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+#define ELF_ET_DYN_BASE		(STACK_TOP / 3 * 2)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports. */
+
+extern unsigned long elf_hwcap;
+#define ELF_HWCAP (elf_hwcap)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM_SIZE 8
+extern char elf_platform[];
+#define ELF_PLATFORM (elf_platform)
+
+#ifndef __s390x__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#else /* __s390x__ */
+#define SET_PERSONALITY(ex, ibcs2)			\
+do {							\
+	if (ibcs2)					\
+		set_personality(PER_SVR4);		\
+	else if (current->personality != PER_LINUX32)	\
+		set_personality(PER_LINUX);		\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
+		set_thread_flag(TIF_31BIT);		\
+	else						\
+		clear_thread_flag(TIF_31BIT);		\
+} while (0)
+#endif /* __s390x__ */
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec(ex, executable_stack)	\
+({							\
+	if (current->mm->context.noexec &&		\
+	    executable_stack != EXSTACK_DISABLE_X)	\
+		disable_noexec(current->mm, current);	\
+	current->mm->context.noexec == 0;		\
+})
+
+#endif
diff --git a/arch/s390/include/asm/emergency-restart.h b/arch/s390/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/s390/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/s390/include/asm/errno.h b/arch/s390/include/asm/errno.h
new file mode 100644
index 00000000000..e41d5b37c4d
--- /dev/null
+++ b/arch/s390/include/asm/errno.h
@@ -0,0 +1,13 @@
+/*
+ *  include/asm-s390/errno.h
+ *
+ *  S390 version
+ *
+ */
+
+#ifndef _S390_ERRNO_H
+#define _S390_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/arch/s390/include/asm/etr.h b/arch/s390/include/asm/etr.h
new file mode 100644
index 00000000000..80ef58c6197
--- /dev/null
+++ b/arch/s390/include/asm/etr.h
@@ -0,0 +1,258 @@
+/*
+ *  include/asm-s390/etr.h
+ *
+ *  Copyright IBM Corp. 2006
+ *  Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+#ifndef __S390_ETR_H
+#define __S390_ETR_H
+
+/* ETR attachment control register */
+struct etr_eacr {
+	unsigned int e0		: 1;	/* port 0 stepping control */
+	unsigned int e1		: 1;	/* port 1 stepping control */
+	unsigned int _pad0	: 5;	/* must be 00100 */
+	unsigned int dp		: 1;	/* data port control */
+	unsigned int p0		: 1;	/* port 0 change recognition control */
+	unsigned int p1		: 1;	/* port 1 change recognition control */
+	unsigned int _pad1	: 3;	/* must be 000 */
+	unsigned int ea		: 1;	/* ETR alert control */
+	unsigned int es		: 1;	/* ETR sync check control */
+	unsigned int sl		: 1;	/* switch to local control */
+} __attribute__ ((packed));
+
+/* Port state returned by steai */
+enum etr_psc {
+	etr_psc_operational = 0,
+	etr_psc_semi_operational = 1,
+	etr_psc_protocol_error =  4,
+	etr_psc_no_symbols = 8,
+	etr_psc_no_signal = 12,
+	etr_psc_pps_mode = 13
+};
+
+/* Logical port state returned by stetr */
+enum etr_lpsc {
+	etr_lpsc_operational_step = 0,
+	etr_lpsc_operational_alt = 1,
+	etr_lpsc_semi_operational = 2,
+	etr_lpsc_protocol_error =  4,
+	etr_lpsc_no_symbol_sync = 8,
+	etr_lpsc_no_signal = 12,
+	etr_lpsc_pps_mode = 13
+};
+
+/* ETR status words */
+struct etr_esw {
+	struct etr_eacr eacr;		/* attachment control register */
+	unsigned int y		: 1;	/* stepping mode */
+	unsigned int _pad0	: 5;	/* must be 00000 */
+	unsigned int p		: 1;	/* stepping port number */
+	unsigned int q		: 1;	/* data port number */
+	unsigned int psc0	: 4;	/* port 0 state code */
+	unsigned int psc1	: 4;	/* port 1 state code */
+} __attribute__ ((packed));
+
+/* Second level data register status word */
+struct etr_slsw {
+	unsigned int vv1	: 1;	/* copy of validity bit data frame 1 */
+	unsigned int vv2	: 1;	/* copy of validity bit data frame 2 */
+	unsigned int vv3	: 1;	/* copy of validity bit data frame 3 */
+	unsigned int vv4	: 1;	/* copy of validity bit data frame 4 */
+	unsigned int _pad0	: 19;	/* must by all zeroes */
+	unsigned int n		: 1;	/* EAF port number */
+	unsigned int v1		: 1;	/* validity bit ETR data frame 1 */
+	unsigned int v2		: 1;	/* validity bit ETR data frame 2 */
+	unsigned int v3		: 1;	/* validity bit ETR data frame 3 */
+	unsigned int v4		: 1;	/* validity bit ETR data frame 4 */
+	unsigned int _pad1	: 4;	/* must be 0000 */
+} __attribute__ ((packed));
+
+/* ETR data frames */
+struct etr_edf1 {
+	unsigned int u		: 1;	/* untuned bit */
+	unsigned int _pad0	: 1;	/* must be 0 */
+	unsigned int r		: 1;	/* service request bit */
+	unsigned int _pad1	: 4;	/* must be 0000 */
+	unsigned int a		: 1;	/* time adjustment bit */
+	unsigned int net_id	: 8;	/* ETR network id */
+	unsigned int etr_id	: 8;	/* id of ETR which sends data frames */
+	unsigned int etr_pn	: 8;	/* port number of ETR output port */
+} __attribute__ ((packed));
+
+struct etr_edf2 {
+	unsigned int etv	: 32;	/* Upper 32 bits of TOD. */
+} __attribute__ ((packed));
+
+struct etr_edf3 {
+	unsigned int rc		: 8;	/* failure reason code */
+	unsigned int _pad0	: 3;	/* must be 000 */
+	unsigned int c		: 1;	/* ETR coupled bit */
+	unsigned int tc		: 4;	/* ETR type code */
+	unsigned int blto	: 8;	/* biased local time offset */
+					/* (blto - 128) * 15 = minutes */
+	unsigned int buo	: 8;	/* biased utc offset */
+					/* (buo - 128) = leap seconds */
+} __attribute__ ((packed));
+
+struct etr_edf4 {
+	unsigned int ed		: 8;	/* ETS device dependent data */
+	unsigned int _pad0	: 1;	/* must be 0 */
+	unsigned int buc	: 5;	/* biased ut1 correction */
+					/* (buc - 16) * 0.1 seconds */
+	unsigned int em		: 6;	/* ETS error magnitude */
+	unsigned int dc		: 6;	/* ETS drift code */
+	unsigned int sc		: 6;	/* ETS steering code */
+} __attribute__ ((packed));
+
+/*
+ * ETR attachment information block, two formats
+ * format 1 has 4 reserved words with a size of 64 bytes
+ * format 2 has 16 reserved words with a size of 96 bytes
+ */
+struct etr_aib {
+	struct etr_esw esw;
+	struct etr_slsw slsw;
+	unsigned long long tsp;
+	struct etr_edf1 edf1;
+	struct etr_edf2 edf2;
+	struct etr_edf3 edf3;
+	struct etr_edf4 edf4;
+	unsigned int reserved[16];
+} __attribute__ ((packed,aligned(8)));
+
+/* ETR interruption parameter */
+struct etr_irq_parm {
+	unsigned int _pad0	: 8;
+	unsigned int pc0	: 1;	/* port 0 state change */
+	unsigned int pc1	: 1;	/* port 1 state change */
+	unsigned int _pad1	: 3;
+	unsigned int eai	: 1;	/* ETR alert indication */
+	unsigned int _pad2	: 18;
+} __attribute__ ((packed));
+
+/* Query TOD offset result */
+struct etr_ptff_qto {
+	unsigned long long physical_clock;
+	unsigned long long tod_offset;
+	unsigned long long logical_tod_offset;
+	unsigned long long tod_epoch_difference;
+} __attribute__ ((packed));
+
+/* Inline assembly helper functions */
+static inline int etr_setr(struct etr_eacr *ctrl)
+{
+	int rc = -ENOSYS;
+
+	asm volatile(
+		"	.insn	s,0xb2160000,0(%2)\n"
+		"0:	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "m" (*ctrl), "a" (ctrl));
+	return rc;
+}
+
+/* Stores a format 1 aib with 64 bytes */
+static inline int etr_stetr(struct etr_aib *aib)
+{
+	int rc = -ENOSYS;
+
+	asm volatile(
+		"	.insn	s,0xb2170000,0(%2)\n"
+		"0:	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "m" (*aib), "a" (aib));
+	return rc;
+}
+
+/* Stores a format 2 aib with 96 bytes for specified port */
+static inline int etr_steai(struct etr_aib *aib, unsigned int func)
+{
+	register unsigned int reg0 asm("0") = func;
+	int rc = -ENOSYS;
+
+	asm volatile(
+		"	.insn	s,0xb2b30000,0(%2)\n"
+		"0:	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0));
+	return rc;
+}
+
+/* Function codes for the steai instruction. */
+#define ETR_STEAI_STEPPING_PORT		0x10
+#define ETR_STEAI_ALTERNATE_PORT	0x11
+#define ETR_STEAI_PORT_0		0x12
+#define ETR_STEAI_PORT_1		0x13
+
+static inline int etr_ptff(void *ptff_block, unsigned int func)
+{
+	register unsigned int reg0 asm("0") = func;
+	register unsigned long reg1 asm("1") = (unsigned long) ptff_block;
+	int rc = -ENOSYS;
+
+	asm volatile(
+		"	.word	0x0104\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (rc), "=m" (ptff_block)
+		: "d" (reg0), "d" (reg1), "m" (ptff_block) : "cc");
+	return rc;
+}
+
+/* Function codes for the ptff instruction. */
+#define ETR_PTFF_QAF	0x00	/* query available functions */
+#define ETR_PTFF_QTO	0x01	/* query tod offset */
+#define ETR_PTFF_QSI	0x02	/* query steering information */
+#define ETR_PTFF_ATO	0x40	/* adjust tod offset */
+#define ETR_PTFF_STO	0x41	/* set tod offset */
+#define ETR_PTFF_SFS	0x42	/* set fine steering rate */
+#define ETR_PTFF_SGS	0x43	/* set gross steering rate */
+
+/* Functions needed by the machine check handler */
+void etr_switch_to_local(void);
+void etr_sync_check(void);
+
+/* STP interruption parameter */
+struct stp_irq_parm {
+	unsigned int _pad0	: 14;
+	unsigned int tsc	: 1;	/* Timing status change */
+	unsigned int lac	: 1;	/* Link availability change */
+	unsigned int tcpc	: 1;	/* Time control parameter change */
+	unsigned int _pad2	: 15;
+} __attribute__ ((packed));
+
+#define STP_OP_SYNC	1
+#define STP_OP_CTRL	3
+
+struct stp_sstpi {
+	unsigned int rsvd0;
+	unsigned int rsvd1 : 8;
+	unsigned int stratum : 8;
+	unsigned int vbits : 16;
+	unsigned int leaps : 16;
+	unsigned int tmd : 4;
+	unsigned int ctn : 4;
+	unsigned int rsvd2 : 3;
+	unsigned int c : 1;
+	unsigned int tst : 4;
+	unsigned int tzo : 16;
+	unsigned int dsto : 16;
+	unsigned int ctrl : 16;
+	unsigned int rsvd3 : 16;
+	unsigned int tto;
+	unsigned int rsvd4;
+	unsigned int ctnid[3];
+	unsigned int rsvd5;
+	unsigned int todoff[4];
+	unsigned int rsvd6[48];
+} __attribute__ ((packed));
+
+/* Functions needed by the machine check handler */
+void stp_sync_check(void);
+void stp_island_check(void);
+
+#endif /* __S390_ETR_H */
diff --git a/arch/s390/include/asm/extmem.h b/arch/s390/include/asm/extmem.h
new file mode 100644
index 00000000000..33837d75618
--- /dev/null
+++ b/arch/s390/include/asm/extmem.h
@@ -0,0 +1,33 @@
+/*
+ *  include/asm-s390x/extmem.h
+ *
+ *  definitions for external memory segment support
+ *  Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#ifndef _ASM_S390X_DCSS_H
+#define _ASM_S390X_DCSS_H
+#ifndef __ASSEMBLY__
+
+/* possible values for segment type as returned by segment_info */
+#define SEG_TYPE_SW 0
+#define SEG_TYPE_EW 1
+#define SEG_TYPE_SR 2
+#define SEG_TYPE_ER 3
+#define SEG_TYPE_SN 4
+#define SEG_TYPE_EN 5
+#define SEG_TYPE_SC 6
+#define SEG_TYPE_EWEN 7
+
+#define SEGMENT_SHARED 0
+#define SEGMENT_EXCLUSIVE 1
+
+int segment_load (char *name, int segtype, unsigned long *addr, unsigned long *length);
+void segment_unload(char *name);
+void segment_save(char *name);
+int segment_type (char* name);
+int segment_modify_shared (char *name, int do_nonshared);
+void segment_warning(int rc, char *seg_name);
+
+#endif
+#endif
diff --git a/arch/s390/include/asm/fb.h b/arch/s390/include/asm/fb.h
new file mode 100644
index 00000000000..c7df3803099
--- /dev/null
+++ b/arch/s390/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/s390/include/asm/fcntl.h b/arch/s390/include/asm/fcntl.h
new file mode 100644
index 00000000000..46ab12db573
--- /dev/null
+++ b/arch/s390/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/s390/include/asm/fcx.h b/arch/s390/include/asm/fcx.h
new file mode 100644
index 00000000000..8be1f3a5804
--- /dev/null
+++ b/arch/s390/include/asm/fcx.h
@@ -0,0 +1,311 @@
+/*
+ *  Functions for assembling fcx enabled I/O control blocks.
+ *
+ *    Copyright IBM Corp. 2008
+ *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_FCX_H
+#define _ASM_S390_FCX_H _ASM_S390_FCX_H
+
+#include <linux/types.h>
+
+#define TCW_FORMAT_DEFAULT		0
+#define TCW_TIDAW_FORMAT_DEFAULT	0
+#define TCW_FLAGS_INPUT_TIDA		1 << (23 - 5)
+#define TCW_FLAGS_TCCB_TIDA		1 << (23 - 6)
+#define TCW_FLAGS_OUTPUT_TIDA		1 << (23 - 7)
+#define TCW_FLAGS_TIDAW_FORMAT(x)	((x) & 3) << (23 - 9)
+#define TCW_FLAGS_GET_TIDAW_FORMAT(x)	(((x) >> (23 - 9)) & 3)
+
+/**
+ * struct tcw - Transport Control Word (TCW)
+ * @format: TCW format
+ * @flags: TCW flags
+ * @tccbl: Transport-Command-Control-Block Length
+ * @r: Read Operations
+ * @w: Write Operations
+ * @output: Output-Data Address
+ * @input: Input-Data Address
+ * @tsb: Transport-Status-Block Address
+ * @tccb: Transport-Command-Control-Block Address
+ * @output_count: Output Count
+ * @input_count: Input Count
+ * @intrg: Interrogate TCW Address
+ */
+struct tcw {
+	u32 format:2;
+	u32 :6;
+	u32 flags:24;
+	u32 :8;
+	u32 tccbl:6;
+	u32 r:1;
+	u32 w:1;
+	u32 :16;
+	u64 output;
+	u64 input;
+	u64 tsb;
+	u64 tccb;
+	u32 output_count;
+	u32 input_count;
+	u32 :32;
+	u32 :32;
+	u32 :32;
+	u32 intrg;
+} __attribute__ ((packed, aligned(64)));
+
+#define TIDAW_FLAGS_LAST		1 << (7 - 0)
+#define TIDAW_FLAGS_SKIP		1 << (7 - 1)
+#define TIDAW_FLAGS_DATA_INT		1 << (7 - 2)
+#define TIDAW_FLAGS_TTIC		1 << (7 - 3)
+#define TIDAW_FLAGS_INSERT_CBC		1 << (7 - 4)
+
+/**
+ * struct tidaw - Transport-Indirect-Addressing Word (TIDAW)
+ * @flags: TIDAW flags. Can be an arithmetic OR of the following constants:
+ * %TIDAW_FLAGS_LAST, %TIDAW_FLAGS_SKIP, %TIDAW_FLAGS_DATA_INT,
+ * %TIDAW_FLAGS_TTIC, %TIDAW_FLAGS_INSERT_CBC
+ * @count: Count
+ * @addr: Address
+ */
+struct tidaw {
+	u32 flags:8;
+	u32 :24;
+	u32 count;
+	u64 addr;
+} __attribute__ ((packed, aligned(16)));
+
+/**
+ * struct tsa_iostat - I/O-Status Transport-Status Area (IO-Stat TSA)
+ * @dev_time: Device Time
+ * @def_time: Defer Time
+ * @queue_time: Queue Time
+ * @dev_busy_time: Device-Busy Time
+ * @dev_act_time: Device-Active-Only Time
+ * @sense: Sense Data (if present)
+ */
+struct tsa_iostat {
+	u32 dev_time;
+	u32 def_time;
+	u32 queue_time;
+	u32 dev_busy_time;
+	u32 dev_act_time;
+	u8 sense[32];
+} __attribute__ ((packed));
+
+/**
+ * struct tsa_ddpcs - Device-Detected-Program-Check Transport-Status Area (DDPC TSA)
+ * @rc: Reason Code
+ * @rcq: Reason Code Qualifier
+ * @sense: Sense Data (if present)
+ */
+struct tsa_ddpc {
+	u32 :24;
+	u32 rc:8;
+	u8 rcq[16];
+	u8 sense[32];
+} __attribute__ ((packed));
+
+#define TSA_INTRG_FLAGS_CU_STATE_VALID		1 << (7 - 0)
+#define TSA_INTRG_FLAGS_DEV_STATE_VALID		1 << (7 - 1)
+#define TSA_INTRG_FLAGS_OP_STATE_VALID		1 << (7 - 2)
+
+/**
+ * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA)
+ * @format: Format
+ * @flags: Flags. Can be an arithmetic OR of the following constants:
+ * %TSA_INTRG_FLAGS_CU_STATE_VALID, %TSA_INTRG_FLAGS_DEV_STATE_VALID,
+ * %TSA_INTRG_FLAGS_OP_STATE_VALID
+ * @cu_state: Controle-Unit State
+ * @dev_state: Device State
+ * @op_state: Operation State
+ * @sd_info: State-Dependent Information
+ * @dl_id: Device-Level Identifier
+ * @dd_data: Device-Dependent Data
+ */
+struct tsa_intrg {
+	u32 format:8;
+	u32 flags:8;
+	u32 cu_state:8;
+	u32 dev_state:8;
+	u32 op_state:8;
+	u32 :24;
+	u8 sd_info[12];
+	u32 dl_id;
+	u8 dd_data[28];
+} __attribute__ ((packed));
+
+#define TSB_FORMAT_NONE		0
+#define TSB_FORMAT_IOSTAT	1
+#define TSB_FORMAT_DDPC		2
+#define TSB_FORMAT_INTRG	3
+
+#define TSB_FLAGS_DCW_OFFSET_VALID	1 << (7 - 0)
+#define TSB_FLAGS_COUNT_VALID		1 << (7 - 1)
+#define TSB_FLAGS_CACHE_MISS		1 << (7 - 2)
+#define TSB_FLAGS_TIME_VALID		1 << (7 - 3)
+#define TSB_FLAGS_FORMAT(x)		((x) & 7)
+#define TSB_FORMAT(t)			((t)->flags & 7)
+
+/**
+ * struct tsb - Transport-Status Block (TSB)
+ * @length: Length
+ * @flags: Flags. Can be an arithmetic OR of the following constants:
+ * %TSB_FLAGS_DCW_OFFSET_VALID, %TSB_FLAGS_COUNT_VALID, %TSB_FLAGS_CACHE_MISS,
+ * %TSB_FLAGS_TIME_VALID
+ * @dcw_offset: DCW Offset
+ * @count: Count
+ * @tsa: Transport-Status-Area
+ */
+struct tsb {
+	u32 length:8;
+	u32 flags:8;
+	u32 dcw_offset:16;
+	u32 count;
+	u32 :32;
+	union {
+		struct tsa_iostat iostat;
+		struct tsa_ddpc ddpc;
+		struct tsa_intrg intrg;
+	} __attribute__ ((packed)) tsa;
+} __attribute__ ((packed, aligned(8)));
+
+#define DCW_INTRG_FORMAT_DEFAULT	0
+
+#define DCW_INTRG_RC_UNSPECIFIED	0
+#define DCW_INTRG_RC_TIMEOUT		1
+
+#define DCW_INTRG_RCQ_UNSPECIFIED	0
+#define DCW_INTRG_RCQ_PRIMARY		1
+#define DCW_INTRG_RCQ_SECONDARY		2
+
+#define DCW_INTRG_FLAGS_MPM		1 < (7 - 0)
+#define DCW_INTRG_FLAGS_PPR		1 < (7 - 1)
+#define DCW_INTRG_FLAGS_CRIT		1 < (7 - 2)
+
+/**
+ * struct dcw_intrg_data - Interrogate DCW data
+ * @format: Format. Should be %DCW_INTRG_FORMAT_DEFAULT
+ * @rc: Reason Code. Can be one of %DCW_INTRG_RC_UNSPECIFIED,
+ * %DCW_INTRG_RC_TIMEOUT
+ * @rcq: Reason Code Qualifier: Can be one of %DCW_INTRG_RCQ_UNSPECIFIED,
+ * %DCW_INTRG_RCQ_PRIMARY, %DCW_INTRG_RCQ_SECONDARY
+ * @lpm: Logical-Path Mask
+ * @pam: Path-Available Mask
+ * @pim: Path-Installed Mask
+ * @timeout: Timeout
+ * @flags: Flags. Can be an arithmetic OR of %DCW_INTRG_FLAGS_MPM,
+ * %DCW_INTRG_FLAGS_PPR, %DCW_INTRG_FLAGS_CRIT
+ * @time: Time
+ * @prog_id: Program Identifier
+ * @prog_data: Program-Dependent Data
+ */
+struct dcw_intrg_data {
+	u32 format:8;
+	u32 rc:8;
+	u32 rcq:8;
+	u32 lpm:8;
+	u32 pam:8;
+	u32 pim:8;
+	u32 timeout:16;
+	u32 flags:8;
+	u32 :24;
+	u32 :32;
+	u64 time;
+	u64 prog_id;
+	u8  prog_data[0];
+} __attribute__ ((packed));
+
+#define DCW_FLAGS_CC		1 << (7 - 1)
+
+#define DCW_CMD_WRITE		0x01
+#define DCW_CMD_READ		0x02
+#define DCW_CMD_CONTROL		0x03
+#define DCW_CMD_SENSE		0x04
+#define DCW_CMD_SENSE_ID	0xe4
+#define DCW_CMD_INTRG		0x40
+
+/**
+ * struct dcw - Device-Command Word (DCW)
+ * @cmd: Command Code. Can be one of %DCW_CMD_WRITE, %DCW_CMD_READ,
+ * %DCW_CMD_CONTROL, %DCW_CMD_SENSE, %DCW_CMD_SENSE_ID, %DCW_CMD_INTRG
+ * @flags: Flags. Can be an arithmetic OR of %DCW_FLAGS_CC
+ * @cd_count: Control-Data Count
+ * @count: Count
+ * @cd: Control Data
+ */
+struct dcw {
+	u32 cmd:8;
+	u32 flags:8;
+	u32 :8;
+	u32 cd_count:8;
+	u32 count;
+	u8 cd[0];
+} __attribute__ ((packed));
+
+#define TCCB_FORMAT_DEFAULT	0x7f
+#define TCCB_MAX_DCW		30
+#define TCCB_MAX_SIZE		(sizeof(struct tccb_tcah) + \
+				 TCCB_MAX_DCW * sizeof(struct dcw) + \
+				 sizeof(struct tccb_tcat))
+#define TCCB_SAC_DEFAULT	0xf901
+#define TCCB_SAC_INTRG		0xf902
+
+/**
+ * struct tccb_tcah - Transport-Command-Area Header (TCAH)
+ * @format: Format. Should be %TCCB_FORMAT_DEFAULT
+ * @tcal: Transport-Command-Area Length
+ * @sac: Service-Action Code. Can be one of %TCCB_SAC_DEFAULT, %TCCB_SAC_INTRG
+ * @prio: Priority
+ */
+struct tccb_tcah {
+	u32 format:8;
+	u32 :24;
+	u32 :24;
+	u32 tcal:8;
+	u32 sac:16;
+	u32 :8;
+	u32 prio:8;
+	u32 :32;
+} __attribute__ ((packed));
+
+/**
+ * struct tccb_tcat - Transport-Command-Area Trailer (TCAT)
+ * @count: Transport Count
+ */
+struct tccb_tcat {
+	u32 :32;
+	u32 count;
+} __attribute__ ((packed));
+
+/**
+ * struct tccb - (partial) Transport-Command-Control Block (TCCB)
+ * @tcah: TCAH
+ * @tca: Transport-Command Area
+ */
+struct tccb {
+	struct tccb_tcah tcah;
+	u8 tca[0];
+} __attribute__ ((packed, aligned(8)));
+
+struct tcw *tcw_get_intrg(struct tcw *tcw);
+void *tcw_get_data(struct tcw *tcw);
+struct tccb *tcw_get_tccb(struct tcw *tcw);
+struct tsb *tcw_get_tsb(struct tcw *tcw);
+
+void tcw_init(struct tcw *tcw, int r, int w);
+void tcw_finalize(struct tcw *tcw, int num_tidaws);
+
+void tcw_set_intrg(struct tcw *tcw, struct tcw *intrg_tcw);
+void tcw_set_data(struct tcw *tcw, void *data, int use_tidal);
+void tcw_set_tccb(struct tcw *tcw, struct tccb *tccb);
+void tcw_set_tsb(struct tcw *tcw, struct tsb *tsb);
+
+void tccb_init(struct tccb *tccb, size_t tccb_size, u32 sac);
+void tsb_init(struct tsb *tsb);
+struct dcw *tccb_add_dcw(struct tccb *tccb, size_t tccb_size, u8 cmd, u8 flags,
+			 void *cd, u8 cd_count, u32 count);
+struct tidaw *tcw_add_tidaw(struct tcw *tcw, int num_tidaws, u8 flags,
+			    void *addr, u32 count);
+
+#endif /* _ASM_S390_FCX_H */
diff --git a/arch/s390/include/asm/futex.h b/arch/s390/include/asm/futex.h
new file mode 100644
index 00000000000..5c5d02de49e
--- /dev/null
+++ b/arch/s390/include/asm/futex.h
@@ -0,0 +1,52 @@
+#ifndef _ASM_S390_FUTEX_H
+#define _ASM_S390_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval, ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+	ret = uaccess.futex_atomic_op(op, uaddr, oparg, &oldval);
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr,
+						int oldval, int newval)
+{
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	return uaccess.futex_atomic_cmpxchg(uaddr, oldval, newval);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_FUTEX_H */
diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
new file mode 100644
index 00000000000..89ec7056da2
--- /dev/null
+++ b/arch/s390/include/asm/hardirq.h
@@ -0,0 +1,51 @@
+/*
+ *  include/asm-s390/hardirq.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ *
+ *  Derived from "include/asm-i386/hardirq.h"
+ */
+
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/sched.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <asm/lowcore.h>
+
+/* irq_cpustat_t is unused currently, but could be converted
+ * into a percpu variable instead of storing softirq_pending
+ * on the lowcore */
+typedef struct {
+	unsigned int __softirq_pending;
+} irq_cpustat_t;
+
+#define local_softirq_pending() (S390_lowcore.softirq_pending)
+
+#define __ARCH_IRQ_STAT
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#define HARDIRQ_BITS	8
+
+void clock_comparator_work(void);
+
+static inline unsigned long long local_tick_disable(void)
+{
+	unsigned long long old;
+
+	old = S390_lowcore.clock_comparator;
+	S390_lowcore.clock_comparator = -1ULL;
+	return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+	S390_lowcore.clock_comparator = comp;
+}
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h
new file mode 100644
index 00000000000..670a1d1745d
--- /dev/null
+++ b/arch/s390/include/asm/hugetlb.h
@@ -0,0 +1,184 @@
+/*
+ *  IBM System z Huge TLB Page Support for Kernel.
+ *
+ *    Copyright IBM Corp. 2008
+ *    Author(s): Gerald Schaefer <gerald.schaefer@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_HUGETLB_H
+#define _ASM_S390_HUGETLB_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+
+#define is_hugepage_only_range(mm, addr, len)	0
+#define hugetlb_free_pgd_range			free_pgd_range
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+#define hugetlb_prefault_arch_hook(mm)		do { } while (0)
+
+int arch_prepare_hugepage(struct page *page);
+void arch_release_hugepage(struct page *page);
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	/*
+	 * PROT_NONE needs to be remapped from the pte type to the ste type.
+	 * The HW invalid bit is also different for pte and ste. The pte
+	 * invalid bit happens to be the same as the ste _SEGMENT_ENTRY_LARGE
+	 * bit, so we don't have to clear it.
+	 */
+	if (pte_val(pte) & _PAGE_INVALID) {
+		if (pte_val(pte) & _PAGE_SWT)
+			pte_val(pte) |= _HPAGE_TYPE_NONE;
+		pte_val(pte) |= _SEGMENT_ENTRY_INV;
+	}
+	/*
+	 * Clear SW pte bits SWT and SWX, there are no SW bits in a segment
+	 * table entry.
+	 */
+	pte_val(pte) &= ~(_PAGE_SWT | _PAGE_SWX);
+	/*
+	 * Also set the change-override bit because we don't need dirty bit
+	 * tracking for hugetlbfs pages.
+	 */
+	pte_val(pte) |= (_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_CO);
+	return pte;
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_RO;
+	return pte;
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return (pte_val(pte) & _SEGMENT_ENTRY_INV) &&
+		!(pte_val(pte) & _SEGMENT_ENTRY_RO);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	unsigned long mask;
+
+	if (!MACHINE_HAS_HPAGE) {
+		ptep = (pte_t *) (pte_val(pte) & _SEGMENT_ENTRY_ORIGIN);
+		if (ptep) {
+			mask = pte_val(pte) &
+				(_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO);
+			pte = pte_mkhuge(*ptep);
+			pte_val(pte) |= mask;
+		}
+	}
+	return pte;
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	pte_t pte = huge_ptep_get(ptep);
+
+	pmd_clear((pmd_t *) ptep);
+	return pte;
+}
+
+static inline void __pmd_csp(pmd_t *pmdp)
+{
+	register unsigned long reg2 asm("2") = pmd_val(*pmdp);
+	register unsigned long reg3 asm("3") = pmd_val(*pmdp) |
+					       _SEGMENT_ENTRY_INV;
+	register unsigned long reg4 asm("4") = ((unsigned long) pmdp) + 5;
+
+	asm volatile(
+		"	csp %1,%3"
+		: "=m" (*pmdp)
+		: "d" (reg2), "d" (reg3), "d" (reg4), "m" (*pmdp) : "cc");
+	pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY;
+}
+
+static inline void __pmd_idte(unsigned long address, pmd_t *pmdp)
+{
+	unsigned long sto = (unsigned long) pmdp -
+				pmd_index(address) * sizeof(pmd_t);
+
+	if (!(pmd_val(*pmdp) & _SEGMENT_ENTRY_INV)) {
+		asm volatile(
+			"	.insn	rrf,0xb98e0000,%2,%3,0,0"
+			: "=m" (*pmdp)
+			: "m" (*pmdp), "a" (sto),
+			  "a" ((address & HPAGE_MASK))
+		);
+	}
+	pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY;
+}
+
+static inline void huge_ptep_invalidate(struct mm_struct *mm,
+					unsigned long address, pte_t *ptep)
+{
+	pmd_t *pmdp = (pmd_t *) ptep;
+
+	if (!MACHINE_HAS_IDTE) {
+		__pmd_csp(pmdp);
+		if (mm->context.noexec) {
+			pmdp = get_shadow_table(pmdp);
+			__pmd_csp(pmdp);
+		}
+		return;
+	}
+
+	__pmd_idte(address, pmdp);
+	if (mm->context.noexec) {
+		pmdp = get_shadow_table(pmdp);
+		__pmd_idte(address, pmdp);
+	}
+	return;
+}
+
+#define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \
+({									    \
+	int __changed = !pte_same(huge_ptep_get(__ptep), __entry);	    \
+	if (__changed) {						    \
+		huge_ptep_invalidate((__vma)->vm_mm, __addr, __ptep);	    \
+		set_huge_pte_at((__vma)->vm_mm, __addr, __ptep, __entry);   \
+	}								    \
+	__changed;							    \
+})
+
+#define huge_ptep_set_wrprotect(__mm, __addr, __ptep)			\
+({									\
+	pte_t __pte = huge_ptep_get(__ptep);				\
+	if (pte_write(__pte)) {						\
+		if (atomic_read(&(__mm)->mm_users) > 1 ||		\
+		    (__mm) != current->active_mm)			\
+			huge_ptep_invalidate(__mm, __addr, __ptep);	\
+		set_huge_pte_at(__mm, __addr, __ptep,			\
+				huge_pte_wrprotect(__pte));		\
+	}								\
+})
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long address, pte_t *ptep)
+{
+	huge_ptep_invalidate(vma->vm_mm, address, ptep);
+}
+
+#endif /* _ASM_S390_HUGETLB_H */
diff --git a/arch/s390/include/asm/idals.h b/arch/s390/include/asm/idals.h
new file mode 100644
index 00000000000..e82c10efe65
--- /dev/null
+++ b/arch/s390/include/asm/idals.h
@@ -0,0 +1,256 @@
+/* 
+ * File...........: linux/include/asm-s390x/idals.h
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000a
+ 
+ * History of changes
+ * 07/24/00 new file
+ * 05/04/02 code restructuring.
+ */
+
+#ifndef _S390_IDALS_H
+#define _S390_IDALS_H
+
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/cio.h>
+#include <asm/uaccess.h>
+
+#ifdef __s390x__
+#define IDA_SIZE_LOG 12 /* 11 for 2k , 12 for 4k */
+#else
+#define IDA_SIZE_LOG 11 /* 11 for 2k , 12 for 4k */
+#endif
+#define IDA_BLOCK_SIZE (1L<<IDA_SIZE_LOG)
+
+/*
+ * Test if an address/length pair needs an idal list.
+ */
+static inline int
+idal_is_needed(void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	return ((__pa(vaddr) + length - 1) >> 31) != 0;
+#else
+	return 0;
+#endif
+}
+
+
+/*
+ * Return the number of idal words needed for an address/length pair.
+ */
+static inline unsigned int
+idal_nr_words(void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	if (idal_is_needed(vaddr, length))
+		return ((__pa(vaddr) & (IDA_BLOCK_SIZE-1)) + length + 
+			(IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
+#endif
+	return 0;
+}
+
+/*
+ * Create the list of idal words for an address/length pair.
+ */
+static inline unsigned long *
+idal_create_words(unsigned long *idaws, void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	unsigned long paddr;
+	unsigned int cidaw;
+
+	paddr = __pa(vaddr);
+	cidaw = ((paddr & (IDA_BLOCK_SIZE-1)) + length + 
+		 (IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
+	*idaws++ = paddr;
+	paddr &= -IDA_BLOCK_SIZE;
+	while (--cidaw > 0) {
+		paddr += IDA_BLOCK_SIZE;
+		*idaws++ = paddr;
+	}
+#endif
+	return idaws;
+}
+
+/*
+ * Sets the address of the data in CCW.
+ * If necessary it allocates an IDAL and sets the appropriate flags.
+ */
+static inline int
+set_normalized_cda(struct ccw1 * ccw, void *vaddr)
+{
+#ifdef __s390x__
+	unsigned int nridaws;
+	unsigned long *idal;
+
+	if (ccw->flags & CCW_FLAG_IDA)
+		return -EINVAL;
+	nridaws = idal_nr_words(vaddr, ccw->count);
+	if (nridaws > 0) {
+		idal = kmalloc(nridaws * sizeof(unsigned long),
+			       GFP_ATOMIC | GFP_DMA );
+		if (idal == NULL)
+			return -ENOMEM;
+		idal_create_words(idal, vaddr, ccw->count);
+		ccw->flags |= CCW_FLAG_IDA;
+		vaddr = idal;
+	}
+#endif
+	ccw->cda = (__u32)(unsigned long) vaddr;
+	return 0;
+}
+
+/*
+ * Releases any allocated IDAL related to the CCW.
+ */
+static inline void
+clear_normalized_cda(struct ccw1 * ccw)
+{
+#ifdef __s390x__
+	if (ccw->flags & CCW_FLAG_IDA) {
+		kfree((void *)(unsigned long) ccw->cda);
+		ccw->flags &= ~CCW_FLAG_IDA;
+	}
+#endif
+	ccw->cda = 0;
+}
+
+/*
+ * Idal buffer extension
+ */
+struct idal_buffer {
+	size_t size;
+	size_t page_order;
+	void *data[0];
+};
+
+/*
+ * Allocate an idal buffer
+ */
+static inline struct idal_buffer *
+idal_buffer_alloc(size_t size, int page_order)
+{
+	struct idal_buffer *ib;
+	int nr_chunks, nr_ptrs, i;
+
+	nr_ptrs = (size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG;
+	nr_chunks = (4096 << page_order) >> IDA_SIZE_LOG;
+	ib = kmalloc(sizeof(struct idal_buffer) + nr_ptrs*sizeof(void *),
+		     GFP_DMA | GFP_KERNEL);
+	if (ib == NULL)
+		return ERR_PTR(-ENOMEM);
+	ib->size = size;
+	ib->page_order = page_order;
+	for (i = 0; i < nr_ptrs; i++) {
+		if ((i & (nr_chunks - 1)) != 0) {
+			ib->data[i] = ib->data[i-1] + IDA_BLOCK_SIZE;
+			continue;
+		}
+		ib->data[i] = (void *)
+			__get_free_pages(GFP_KERNEL, page_order);
+		if (ib->data[i] != NULL)
+			continue;
+		// Not enough memory
+		while (i >= nr_chunks) {
+			i -= nr_chunks;
+			free_pages((unsigned long) ib->data[i],
+				   ib->page_order);
+		}
+		kfree(ib);
+		return ERR_PTR(-ENOMEM);
+	}
+	return ib;
+}
+
+/*
+ * Free an idal buffer.
+ */
+static inline void
+idal_buffer_free(struct idal_buffer *ib)
+{
+	int nr_chunks, nr_ptrs, i;
+
+	nr_ptrs = (ib->size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG;
+	nr_chunks = (4096 << ib->page_order) >> IDA_SIZE_LOG;
+	for (i = 0; i < nr_ptrs; i += nr_chunks)
+		free_pages((unsigned long) ib->data[i], ib->page_order);
+	kfree(ib);
+}
+
+/*
+ * Test if a idal list is really needed.
+ */
+static inline int
+__idal_buffer_is_needed(struct idal_buffer *ib)
+{
+#ifdef __s390x__
+	return ib->size > (4096ul << ib->page_order) ||
+		idal_is_needed(ib->data[0], ib->size);
+#else
+	return ib->size > (4096ul << ib->page_order);
+#endif
+}
+
+/*
+ * Set channel data address to idal buffer.
+ */
+static inline void
+idal_buffer_set_cda(struct idal_buffer *ib, struct ccw1 *ccw)
+{
+	if (__idal_buffer_is_needed(ib)) {
+		// setup idals;
+		ccw->cda = (u32)(addr_t) ib->data;
+		ccw->flags |= CCW_FLAG_IDA;
+	} else
+		// we do not need idals - use direct addressing
+		ccw->cda = (u32)(addr_t) ib->data[0];
+	ccw->count = ib->size;
+}
+
+/*
+ * Copy count bytes from an idal buffer to user memory
+ */
+static inline size_t
+idal_buffer_to_user(struct idal_buffer *ib, void __user *to, size_t count)
+{
+	size_t left;
+	int i;
+
+	BUG_ON(count > ib->size);
+	for (i = 0; count > IDA_BLOCK_SIZE; i++) {
+		left = copy_to_user(to, ib->data[i], IDA_BLOCK_SIZE);
+		if (left)
+			return left + count - IDA_BLOCK_SIZE;
+		to = (void __user *) to + IDA_BLOCK_SIZE;
+		count -= IDA_BLOCK_SIZE;
+	}
+	return copy_to_user(to, ib->data[i], count);
+}
+
+/*
+ * Copy count bytes from user memory to an idal buffer
+ */
+static inline size_t
+idal_buffer_from_user(struct idal_buffer *ib, const void __user *from, size_t count)
+{
+	size_t left;
+	int i;
+
+	BUG_ON(count > ib->size);
+	for (i = 0; count > IDA_BLOCK_SIZE; i++) {
+		left = copy_from_user(ib->data[i], from, IDA_BLOCK_SIZE);
+		if (left)
+			return left + count - IDA_BLOCK_SIZE;
+		from = (void __user *) from + IDA_BLOCK_SIZE;
+		count -= IDA_BLOCK_SIZE;
+	}
+	return copy_from_user(ib->data[i], from, count);
+}
+
+#endif
diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h
new file mode 100644
index 00000000000..b7ff6afc3ca
--- /dev/null
+++ b/arch/s390/include/asm/io.h
@@ -0,0 +1,54 @@
+/*
+ *  include/asm-s390/io.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/io.h"
+ */
+
+#ifndef _S390_IO_H
+#define _S390_IO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	unsigned long real_address;
+	asm volatile(
+		 "	lra	%0,0(%1)\n"
+		 "	jz	0f\n"
+		 "	la	%0,0\n"
+                 "0:"
+		 : "=a" (real_address) : "a" (address) : "cc");
+        return real_address;
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *) address;
+}
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/s390/include/asm/ioctl.h b/arch/s390/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/s390/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/s390/include/asm/ioctls.h b/arch/s390/include/asm/ioctls.h
new file mode 100644
index 00000000000..40e481b1b46
--- /dev/null
+++ b/arch/s390/include/asm/ioctls.h
@@ -0,0 +1,92 @@
+/*
+ *  include/asm-s390/ioctls.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/ioctls.h"
+ */
+
+#ifndef __ARCH_S390_IOCTLS_H__
+#define __ARCH_S390_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/arch/s390/include/asm/ipcbuf.h b/arch/s390/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..37f293d12c8
--- /dev/null
+++ b/arch/s390/include/asm/ipcbuf.h
@@ -0,0 +1,31 @@
+#ifndef __S390_IPCBUF_H__
+#define __S390_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+#ifndef __s390x__
+	unsigned short		__pad2;
+#endif /* ! __s390x__ */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __S390_IPCBUF_H__ */
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
new file mode 100644
index 00000000000..1171e6d144a
--- /dev/null
+++ b/arch/s390/include/asm/ipl.h
@@ -0,0 +1,168 @@
+/*
+ * s390 (re)ipl support
+ *
+ * Copyright IBM Corp. 2007
+ */
+
+#ifndef _ASM_S390_IPL_H
+#define _ASM_S390_IPL_H
+
+#include <asm/types.h>
+#include <asm/cio.h>
+#include <asm/setup.h>
+
+#define IPL_PARMBLOCK_ORIGIN	0x2000
+
+#define IPL_PARM_BLK_FCP_LEN (sizeof(struct ipl_list_hdr) + \
+			      sizeof(struct ipl_block_fcp))
+
+#define IPL_PARM_BLK0_FCP_LEN (sizeof(struct ipl_block_fcp) + 8)
+
+#define IPL_PARM_BLK_CCW_LEN (sizeof(struct ipl_list_hdr) + \
+			      sizeof(struct ipl_block_ccw))
+
+#define IPL_PARM_BLK0_CCW_LEN (sizeof(struct ipl_block_ccw) + 8)
+
+#define IPL_MAX_SUPPORTED_VERSION (0)
+
+#define IPL_PARMBLOCK_START	((struct ipl_parameter_block *) \
+				 IPL_PARMBLOCK_ORIGIN)
+#define IPL_PARMBLOCK_SIZE	(IPL_PARMBLOCK_START->hdr.len)
+
+struct ipl_list_hdr {
+	u32 len;
+	u8  reserved1[3];
+	u8  version;
+	u32 blk0_len;
+	u8  pbt;
+	u8  flags;
+	u16 reserved2;
+} __attribute__((packed));
+
+struct ipl_block_fcp {
+	u8  reserved1[313-1];
+	u8  opt;
+	u8  reserved2[3];
+	u16 reserved3;
+	u16 devno;
+	u8  reserved4[4];
+	u64 wwpn;
+	u64 lun;
+	u32 bootprog;
+	u8  reserved5[12];
+	u64 br_lba;
+	u32 scp_data_len;
+	u8  reserved6[260];
+	u8  scp_data[];
+} __attribute__((packed));
+
+#define DIAG308_VMPARM_SIZE	64
+
+struct ipl_block_ccw {
+	u8  load_parm[8];
+	u8  reserved1[84];
+	u8  reserved2[2];
+	u16 devno;
+	u8  vm_flags;
+	u8  reserved3[3];
+	u32 vm_parm_len;
+	u8  nss_name[8];
+	u8  vm_parm[DIAG308_VMPARM_SIZE];
+	u8  reserved4[8];
+} __attribute__((packed));
+
+struct ipl_parameter_block {
+	struct ipl_list_hdr hdr;
+	union {
+		struct ipl_block_fcp fcp;
+		struct ipl_block_ccw ccw;
+	} ipl_info;
+} __attribute__((packed,aligned(4096)));
+
+/*
+ * IPL validity flags
+ */
+extern u32 ipl_flags;
+extern u32 dump_prefix_page;
+extern unsigned int zfcpdump_prefix_array[];
+
+extern void do_reipl(void);
+extern void do_halt(void);
+extern void do_poff(void);
+extern void ipl_save_parameters(void);
+extern void ipl_update_parameters(void);
+extern void get_ipl_vmparm(char *);
+
+enum {
+	IPL_DEVNO_VALID		= 1,
+	IPL_PARMBLOCK_VALID	= 2,
+	IPL_NSS_VALID		= 4,
+};
+
+enum ipl_type {
+	IPL_TYPE_UNKNOWN	= 1,
+	IPL_TYPE_CCW		= 2,
+	IPL_TYPE_FCP		= 4,
+	IPL_TYPE_FCP_DUMP	= 8,
+	IPL_TYPE_NSS		= 16,
+};
+
+struct ipl_info
+{
+	enum ipl_type type;
+	union {
+		struct {
+			struct ccw_dev_id dev_id;
+		} ccw;
+		struct {
+			struct ccw_dev_id dev_id;
+			u64 wwpn;
+			u64 lun;
+		} fcp;
+		struct {
+			char name[NSS_NAME_SIZE + 1];
+		} nss;
+	} data;
+};
+
+extern struct ipl_info ipl_info;
+extern void setup_ipl(void);
+
+/*
+ * DIAG 308 support
+ */
+enum diag308_subcode  {
+	DIAG308_REL_HSA	= 2,
+	DIAG308_IPL	= 3,
+	DIAG308_DUMP	= 4,
+	DIAG308_SET	= 5,
+	DIAG308_STORE	= 6,
+};
+
+enum diag308_ipl_type {
+	DIAG308_IPL_TYPE_FCP	= 0,
+	DIAG308_IPL_TYPE_CCW	= 2,
+};
+
+enum diag308_opt {
+	DIAG308_IPL_OPT_IPL	= 0x10,
+	DIAG308_IPL_OPT_DUMP	= 0x20,
+};
+
+enum diag308_flags {
+	DIAG308_FLAGS_LP_VALID	= 0x80,
+};
+
+enum diag308_vm_flags {
+	DIAG308_VM_FLAGS_NSS_VALID	= 0x80,
+	DIAG308_VM_FLAGS_VP_VALID	= 0x40,
+};
+
+enum diag308_rc {
+	DIAG308_RC_OK		= 0x0001,
+	DIAG308_RC_NOCONFIG	= 0x0102,
+};
+
+extern int diag308(unsigned long subcode, void *addr);
+
+#endif /* _ASM_S390_IPL_H */
diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h
new file mode 100644
index 00000000000..7da991a858f
--- /dev/null
+++ b/arch/s390/include/asm/irq.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#ifdef __KERNEL__
+#include <linux/hardirq.h>
+
+/*
+ * the definition of irqs has changed in 2.5.46:
+ * NR_IRQS is no longer the number of i/o
+ * interrupts (65536), but rather the number
+ * of interrupt classes (2).
+ * Only external and i/o interrupts make much sense here (CH).
+ */
+
+enum interruption_class {
+	EXTERNAL_INTERRUPT,
+	IO_INTERRUPT,
+
+	NR_IRQS,
+};
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/s390/include/asm/irq_regs.h b/arch/s390/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/s390/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h
new file mode 100644
index 00000000000..3f26131120b
--- /dev/null
+++ b/arch/s390/include/asm/irqflags.h
@@ -0,0 +1,106 @@
+/*
+ *  include/asm-s390/irqflags.h
+ *
+ *    Copyright (C) IBM Corp. 2006
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef __ASM_IRQFLAGS_H
+#define __ASM_IRQFLAGS_H
+
+#ifdef __KERNEL__
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+/* store then or system mask. */
+#define __raw_local_irq_stosm(__or)					\
+({									\
+	unsigned long __mask;						\
+	asm volatile(							\
+		"	stosm	%0,%1"					\
+		: "=Q" (__mask) : "i" (__or) : "memory");		\
+	__mask;								\
+})
+
+/* store then and system mask. */
+#define __raw_local_irq_stnsm(__and)					\
+({									\
+	unsigned long __mask;						\
+	asm volatile(							\
+		"	stnsm	%0,%1"					\
+		: "=Q" (__mask) : "i" (__and) : "memory");		\
+	__mask;								\
+})
+
+/* set system mask. */
+#define __raw_local_irq_ssm(__mask)					\
+({									\
+	asm volatile("ssm   %0" : : "Q" (__mask) : "memory");		\
+})
+
+#else /* __GNUC__ */
+
+/* store then or system mask. */
+#define __raw_local_irq_stosm(__or)					\
+({									\
+	unsigned long __mask;						\
+	asm volatile(							\
+		"	stosm	0(%1),%2"				\
+		: "=m" (__mask)						\
+		: "a" (&__mask), "i" (__or) : "memory");		\
+	__mask;								\
+})
+
+/* store then and system mask. */
+#define __raw_local_irq_stnsm(__and)					\
+({									\
+	unsigned long __mask;						\
+	asm volatile(							\
+		"	stnsm	0(%1),%2"				\
+		: "=m" (__mask)						\
+		: "a" (&__mask), "i" (__and) : "memory");		\
+	__mask;								\
+})
+
+/* set system mask. */
+#define __raw_local_irq_ssm(__mask)					\
+({									\
+	asm volatile(							\
+		"	ssm	0(%0)"					\
+		: : "a" (&__mask), "m" (__mask) : "memory");		\
+})
+
+#endif /* __GNUC__ */
+
+/* interrupt control.. */
+static inline unsigned long raw_local_irq_enable(void)
+{
+	return __raw_local_irq_stosm(0x03);
+}
+
+static inline unsigned long raw_local_irq_disable(void)
+{
+	return __raw_local_irq_stnsm(0xfc);
+}
+
+#define raw_local_save_flags(x)						\
+do {									\
+	typecheck(unsigned long, x);					\
+	(x) = __raw_local_irq_stosm(0x00);				\
+} while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	__raw_local_irq_ssm(flags);
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & (3UL << (BITS_PER_LONG - 8)));
+}
+
+/* For spinlocks etc */
+#define raw_local_irq_save(x)	((x) = raw_local_irq_disable())
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_IRQFLAGS_H */
diff --git a/arch/s390/include/asm/isc.h b/arch/s390/include/asm/isc.h
new file mode 100644
index 00000000000..34bb8916db4
--- /dev/null
+++ b/arch/s390/include/asm/isc.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_S390_ISC_H
+#define _ASM_S390_ISC_H
+
+#include <linux/types.h>
+
+/*
+ * I/O interruption subclasses used by drivers.
+ * Please add all used iscs here so that it is possible to distribute
+ * isc usage between drivers.
+ * Reminder: 0 is highest priority, 7 lowest.
+ */
+#define MAX_ISC 7
+
+/* Regular I/O interrupts. */
+#define IO_SCH_ISC 3			/* regular I/O subchannels */
+#define CONSOLE_ISC 1			/* console I/O subchannel */
+#define CHSC_SCH_ISC 7			/* CHSC subchannels */
+/* Adapter interrupts. */
+#define QDIO_AIRQ_ISC IO_SCH_ISC	/* I/O subchannel in qdio mode */
+
+/* Functions for registration of I/O interruption subclasses */
+void isc_register(unsigned int isc);
+void isc_unregister(unsigned int isc);
+
+#endif /* _ASM_S390_ISC_H */
diff --git a/arch/s390/include/asm/itcw.h b/arch/s390/include/asm/itcw.h
new file mode 100644
index 00000000000..a9bc5c36b32
--- /dev/null
+++ b/arch/s390/include/asm/itcw.h
@@ -0,0 +1,30 @@
+/*
+ *  Functions for incremental construction of fcx enabled I/O control blocks.
+ *
+ *    Copyright IBM Corp. 2008
+ *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_ITCW_H
+#define _ASM_S390_ITCW_H _ASM_S390_ITCW_H
+
+#include <linux/types.h>
+#include <asm/fcx.h>
+
+#define ITCW_OP_READ	0
+#define ITCW_OP_WRITE	1
+
+struct itcw;
+
+struct tcw *itcw_get_tcw(struct itcw *itcw);
+size_t itcw_calc_size(int intrg, int max_tidaws, int intrg_max_tidaws);
+struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg,
+		       int max_tidaws, int intrg_max_tidaws);
+struct dcw *itcw_add_dcw(struct itcw *itcw, u8 cmd, u8 flags, void *cd,
+			 u8 cd_count, u32 count);
+struct tidaw *itcw_add_tidaw(struct itcw *itcw, u8 flags, void *addr,
+			     u32 count);
+void itcw_set_data(struct itcw *itcw, void *addr, int use_tidal);
+void itcw_finalize(struct itcw *itcw);
+
+#endif /* _ASM_S390_ITCW_H */
diff --git a/arch/s390/include/asm/kdebug.h b/arch/s390/include/asm/kdebug.h
new file mode 100644
index 00000000000..40db27cd6e6
--- /dev/null
+++ b/arch/s390/include/asm/kdebug.h
@@ -0,0 +1,27 @@
+#ifndef _S390_KDEBUG_H
+#define _S390_KDEBUG_H
+
+/*
+ * Feb 2006 Ported to s390 <grundym@us.ibm.com>
+ */
+
+struct pt_regs;
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_BPT,
+	DIE_SSTEP,
+	DIE_PANIC,
+	DIE_NMI,
+	DIE_DIE,
+	DIE_NMIWATCHDOG,
+	DIE_KERNELDEBUG,
+	DIE_TRAP,
+	DIE_GPF,
+	DIE_CALL,
+	DIE_NMI_IPI,
+};
+
+extern void die(const char *, struct pt_regs *, long);
+
+#endif
diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h
new file mode 100644
index 00000000000..bb729b84a21
--- /dev/null
+++ b/arch/s390/include/asm/kexec.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-s390/kexec.h
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ *
+ */
+
+#ifndef _S390_KEXEC_H
+#define _S390_KEXEC_H
+
+#ifdef __KERNEL__
+#include <asm/page.h>
+#endif
+#include <asm/processor.h>
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control pages */
+/* Not more than 2GB */
+#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
+
+/* Allocate one page for the pdp and the second for the code */
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_S390
+
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs) { }
+
+#endif /*_S390_KEXEC_H */
diff --git a/arch/s390/include/asm/kmap_types.h b/arch/s390/include/asm/kmap_types.h
new file mode 100644
index 00000000000..fd157464822
--- /dev/null
+++ b/arch/s390/include/asm/kmap_types.h
@@ -0,0 +1,23 @@
+#ifdef __KERNEL__
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,	
+	KM_TYPE_NR
+};
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/arch/s390/include/asm/kprobes.h b/arch/s390/include/asm/kprobes.h
new file mode 100644
index 00000000000..330f68caffe
--- /dev/null
+++ b/arch/s390/include/asm/kprobes.h
@@ -0,0 +1,103 @@
+#ifndef _ASM_S390_KPROBES_H
+#define _ASM_S390_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2006
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ * 2004-Nov	Modified for PPC64 by Ananth N Mavinakayanahalli
+ *		<ananth@in.ibm.com>
+ * 2005-Dec	Used as a template for s390 by Mike Grundy
+ *		<grundym@us.ibm.com>
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define  __ARCH_WANT_KPROBES_INSN_SLOT
+struct pt_regs;
+struct kprobe;
+
+typedef u16 kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0x0002
+
+/* Maximum instruction size is 3 (16bit) halfwords: */
+#define MAX_INSN_SIZE		0x0003
+#define MAX_STACK_SIZE		64
+#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
+	(((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
+	? (MAX_STACK_SIZE) \
+	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
+
+#define kretprobe_blacklist_size 0
+
+#define KPROBE_SWAP_INST	0x10
+
+#define FIXUP_PSW_NORMAL	0x08
+#define FIXUP_BRANCH_NOT_TAKEN	0x04
+#define FIXUP_RETURN_REGISTER	0x02
+#define FIXUP_NOT_REQUIRED	0x01
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	/* copy of original instruction */
+	kprobe_opcode_t *insn;
+	int fixup;
+	int ilen;
+	int reg;
+};
+
+struct ins_replace_args {
+	kprobe_opcode_t *ptr;
+	kprobe_opcode_t old;
+	kprobe_opcode_t new;
+};
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long saved_psw;
+	unsigned long kprobe_saved_imask;
+	unsigned long kprobe_saved_ctl[3];
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_saved_imask;
+	unsigned long kprobe_saved_ctl[3];
+	struct pt_regs jprobe_saved_regs;
+	unsigned long jprobe_saved_r14;
+	unsigned long jprobe_saved_r15;
+	struct prev_kprobe prev_kprobe;
+	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+};
+
+void arch_remove_kprobe(struct kprobe *p);
+void kretprobe_trampoline(void);
+int  is_prohibited_opcode(kprobe_opcode_t *instruction);
+void get_instruction_type(struct arch_specific_insn *ainsn);
+
+int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+int kprobe_exceptions_notify(struct notifier_block *self,
+	unsigned long val, void *data);
+
+#define flush_insn_slot(p)	do { } while (0)
+
+#endif	/* _ASM_S390_KPROBES_H */
diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h
new file mode 100644
index 00000000000..d74002f9579
--- /dev/null
+++ b/arch/s390/include/asm/kvm.h
@@ -0,0 +1,45 @@
+#ifndef __LINUX_KVM_S390_H
+#define __LINUX_KVM_S390_H
+
+/*
+ * asm-s390/kvm.h - KVM s390 specific structures and definitions
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *               Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+#include <asm/types.h>
+
+/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
+struct kvm_pic_state {
+	/* no PIC for s390 */
+};
+
+struct kvm_ioapic_state {
+	/* no IOAPIC for s390 */
+};
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+	/* general purpose regs for s390 */
+	__u64 gprs[16];
+};
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+	__u32 acrs[16];
+	__u64 crs[16];
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+	__u32 fpc;
+	__u64 fprs[16];
+};
+
+#endif
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
new file mode 100644
index 00000000000..3c55e4107dc
--- /dev/null
+++ b/arch/s390/include/asm/kvm_host.h
@@ -0,0 +1,235 @@
+/*
+ * asm-s390/kvm_host.h - definition for kernel virtual machines on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ */
+
+
+#ifndef ASM_KVM_HOST_H
+#define ASM_KVM_HOST_H
+#include <linux/kvm_host.h>
+#include <asm/debug.h>
+
+#define KVM_MAX_VCPUS 64
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+struct kvm_guest_debug {
+};
+
+struct sca_entry {
+	atomic_t scn;
+	__u64	reserved;
+	__u64	sda;
+	__u64	reserved2[2];
+} __attribute__((packed));
+
+
+struct sca_block {
+	__u64	ipte_control;
+	__u64	reserved[5];
+	__u64	mcn;
+	__u64	reserved2;
+	struct sca_entry cpu[64];
+} __attribute__((packed));
+
+#define KVM_PAGES_PER_HPAGE 256
+
+#define CPUSTAT_HOST       0x80000000
+#define CPUSTAT_WAIT       0x10000000
+#define CPUSTAT_ECALL_PEND 0x08000000
+#define CPUSTAT_STOP_INT   0x04000000
+#define CPUSTAT_IO_INT     0x02000000
+#define CPUSTAT_EXT_INT    0x01000000
+#define CPUSTAT_RUNNING    0x00800000
+#define CPUSTAT_RETAINED   0x00400000
+#define CPUSTAT_TIMING_SUB 0x00020000
+#define CPUSTAT_SIE_SUB    0x00010000
+#define CPUSTAT_RRF        0x00008000
+#define CPUSTAT_SLSV       0x00004000
+#define CPUSTAT_SLSR       0x00002000
+#define CPUSTAT_ZARCH      0x00000800
+#define CPUSTAT_MCDS       0x00000100
+#define CPUSTAT_SM         0x00000080
+#define CPUSTAT_G          0x00000008
+#define CPUSTAT_J          0x00000002
+#define CPUSTAT_P          0x00000001
+
+struct kvm_s390_sie_block {
+	atomic_t cpuflags;		/* 0x0000 */
+	__u32	prefix;			/* 0x0004 */
+	__u8	reserved8[32];		/* 0x0008 */
+	__u64	cputm;			/* 0x0028 */
+	__u64	ckc;			/* 0x0030 */
+	__u64	epoch;			/* 0x0038 */
+	__u8	reserved40[4];		/* 0x0040 */
+#define LCTL_CR0	0x8000
+	__u16   lctl;			/* 0x0044 */
+	__s16	icpua;			/* 0x0046 */
+	__u32	ictl;			/* 0x0048 */
+	__u32	eca;			/* 0x004c */
+	__u8	icptcode;		/* 0x0050 */
+	__u8	reserved51;		/* 0x0051 */
+	__u16	ihcpu;			/* 0x0052 */
+	__u8	reserved54[2];		/* 0x0054 */
+	__u16	ipa;			/* 0x0056 */
+	__u32	ipb;			/* 0x0058 */
+	__u32	scaoh;			/* 0x005c */
+	__u8	reserved60;		/* 0x0060 */
+	__u8	ecb;			/* 0x0061 */
+	__u8	reserved62[2];		/* 0x0062 */
+	__u32	scaol;			/* 0x0064 */
+	__u8	reserved68[4];		/* 0x0068 */
+	__u32	todpr;			/* 0x006c */
+	__u8	reserved70[16];		/* 0x0070 */
+	__u64	gmsor;			/* 0x0080 */
+	__u64	gmslm;			/* 0x0088 */
+	psw_t	gpsw;			/* 0x0090 */
+	__u64	gg14;			/* 0x00a0 */
+	__u64	gg15;			/* 0x00a8 */
+	__u8	reservedb0[30];		/* 0x00b0 */
+	__u16   iprcc;			/* 0x00ce */
+	__u8	reservedd0[48];		/* 0x00d0 */
+	__u64	gcr[16];		/* 0x0100 */
+	__u64	gbea;			/* 0x0180 */
+	__u8	reserved188[120];	/* 0x0188 */
+} __attribute__((packed));
+
+struct kvm_vcpu_stat {
+	u32 exit_userspace;
+	u32 exit_null;
+	u32 exit_external_request;
+	u32 exit_external_interrupt;
+	u32 exit_stop_request;
+	u32 exit_validity;
+	u32 exit_instruction;
+	u32 instruction_lctl;
+	u32 instruction_lctlg;
+	u32 exit_program_interruption;
+	u32 exit_instr_and_program;
+	u32 deliver_emergency_signal;
+	u32 deliver_service_signal;
+	u32 deliver_virtio_interrupt;
+	u32 deliver_stop_signal;
+	u32 deliver_prefix_signal;
+	u32 deliver_restart_signal;
+	u32 deliver_program_int;
+	u32 exit_wait_state;
+	u32 instruction_stidp;
+	u32 instruction_spx;
+	u32 instruction_stpx;
+	u32 instruction_stap;
+	u32 instruction_storage_key;
+	u32 instruction_stsch;
+	u32 instruction_chsc;
+	u32 instruction_stsi;
+	u32 instruction_stfl;
+	u32 instruction_sigp_sense;
+	u32 instruction_sigp_emergency;
+	u32 instruction_sigp_stop;
+	u32 instruction_sigp_arch;
+	u32 instruction_sigp_prefix;
+	u32 instruction_sigp_restart;
+	u32 diagnose_44;
+};
+
+struct kvm_s390_io_info {
+	__u16        subchannel_id;            /* 0x0b8 */
+	__u16        subchannel_nr;            /* 0x0ba */
+	__u32        io_int_parm;              /* 0x0bc */
+	__u32        io_int_word;              /* 0x0c0 */
+};
+
+struct kvm_s390_ext_info {
+	__u32 ext_params;
+	__u64 ext_params2;
+};
+
+#define PGM_OPERATION            0x01
+#define PGM_PRIVILEGED_OPERATION 0x02
+#define PGM_EXECUTE              0x03
+#define PGM_PROTECTION           0x04
+#define PGM_ADDRESSING           0x05
+#define PGM_SPECIFICATION        0x06
+#define PGM_DATA                 0x07
+
+struct kvm_s390_pgm_info {
+	__u16 code;
+};
+
+struct kvm_s390_prefix_info {
+	__u32 address;
+};
+
+struct kvm_s390_interrupt_info {
+	struct list_head list;
+	u64	type;
+	union {
+		struct kvm_s390_io_info io;
+		struct kvm_s390_ext_info ext;
+		struct kvm_s390_pgm_info pgm;
+		struct kvm_s390_prefix_info prefix;
+	};
+};
+
+/* for local_interrupt.action_flags */
+#define ACTION_STORE_ON_STOP 1
+#define ACTION_STOP_ON_STOP  2
+
+struct kvm_s390_local_interrupt {
+	spinlock_t lock;
+	struct list_head list;
+	atomic_t active;
+	struct kvm_s390_float_interrupt *float_int;
+	int timer_due; /* event indicator for waitqueue below */
+	wait_queue_head_t wq;
+	atomic_t *cpuflags;
+	unsigned int action_bits;
+};
+
+struct kvm_s390_float_interrupt {
+	spinlock_t lock;
+	struct list_head list;
+	atomic_t active;
+	int next_rr_cpu;
+	unsigned long idle_mask [(64 + sizeof(long) - 1) / sizeof(long)];
+	struct kvm_s390_local_interrupt *local_int[64];
+};
+
+
+struct kvm_vcpu_arch {
+	struct kvm_s390_sie_block *sie_block;
+	unsigned long	  guest_gprs[16];
+	s390_fp_regs      host_fpregs;
+	unsigned int      host_acrs[NUM_ACRS];
+	s390_fp_regs      guest_fpregs;
+	unsigned int      guest_acrs[NUM_ACRS];
+	struct kvm_s390_local_interrupt local_int;
+	struct timer_list ckc_timer;
+	union  {
+		cpuid_t	  cpu_id;
+		u64	  stidp_data;
+	};
+};
+
+struct kvm_vm_stat {
+	u32 remote_tlb_flush;
+};
+
+struct kvm_arch{
+	unsigned long guest_origin;
+	unsigned long guest_memsize;
+	struct sca_block *sca;
+	debug_info_t *dbf;
+	struct kvm_s390_float_interrupt float_int;
+};
+
+extern int sie64a(struct kvm_s390_sie_block *, unsigned long *);
+#endif
diff --git a/arch/s390/include/asm/kvm_para.h b/arch/s390/include/asm/kvm_para.h
new file mode 100644
index 00000000000..2c503796b61
--- /dev/null
+++ b/arch/s390/include/asm/kvm_para.h
@@ -0,0 +1,150 @@
+/*
+ * asm-s390/kvm_para.h - definition for paravirtual devices on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+#ifndef __S390_KVM_PARA_H
+#define __S390_KVM_PARA_H
+
+/*
+ * Hypercalls for KVM on s390. The calling convention is similar to the
+ * s390 ABI, so we use R2-R6 for parameters 1-5. In addition we use R1
+ * as hypercall number and R7 as parameter 6. The return value is
+ * written to R2. We use the diagnose instruction as hypercall. To avoid
+ * conflicts with existing diagnoses for LPAR and z/VM, we do not use
+ * the instruction encoded number, but specify the number in R1 and
+ * use 0x500 as KVM hypercall
+ *
+ * Copyright IBM Corp. 2007,2008
+ * Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ */
+
+static inline long kvm_hypercall0(unsigned long nr)
+{
+	register unsigned long __nr asm("1") = nr;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr): "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall1(unsigned long nr, unsigned long p1)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1) : "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall2(unsigned long nr, unsigned long p1,
+			       unsigned long p2)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2)
+		      : "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall3(unsigned long nr, unsigned long p1,
+			       unsigned long p2, unsigned long p3)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register unsigned long __p3 asm("4") = p3;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
+			"d" (__p3) : "memory", "cc");
+	return __rc;
+}
+
+
+static inline long kvm_hypercall4(unsigned long nr, unsigned long p1,
+			       unsigned long p2, unsigned long p3,
+			       unsigned long p4)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register unsigned long __p3 asm("4") = p3;
+	register unsigned long __p4 asm("5") = p4;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
+			"d" (__p3), "d" (__p4) : "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall5(unsigned long nr, unsigned long p1,
+			       unsigned long p2, unsigned long p3,
+			       unsigned long p4, unsigned long p5)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register unsigned long __p3 asm("4") = p3;
+	register unsigned long __p4 asm("5") = p4;
+	register unsigned long __p5 asm("6") = p5;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
+			"d" (__p3), "d" (__p4), "d" (__p5)  : "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall6(unsigned long nr, unsigned long p1,
+			       unsigned long p2, unsigned long p3,
+			       unsigned long p4, unsigned long p5,
+			       unsigned long p6)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register unsigned long __p3 asm("4") = p3;
+	register unsigned long __p4 asm("5") = p4;
+	register unsigned long __p5 asm("6") = p5;
+	register unsigned long __p6 asm("7") = p6;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
+			"d" (__p3), "d" (__p4), "d" (__p5), "d" (__p6)
+		      : "memory", "cc");
+	return __rc;
+}
+
+/* kvm on s390 is always paravirtualization enabled */
+static inline int kvm_para_available(void)
+{
+	return 1;
+}
+
+/* No feature bits are currently assigned for kvm on s390 */
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#endif /* __S390_KVM_PARA_H */
diff --git a/arch/s390/include/asm/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h
new file mode 100644
index 00000000000..146100224de
--- /dev/null
+++ b/arch/s390/include/asm/kvm_virtio.h
@@ -0,0 +1,63 @@
+/*
+ * kvm_virtio.h - definition for virtio for kvm on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+#ifndef __KVM_S390_VIRTIO_H
+#define __KVM_S390_VIRTIO_H
+
+#include <linux/types.h>
+
+struct kvm_device_desc {
+	/* The device type: console, network, disk etc.  Type 0 terminates. */
+	__u8 type;
+	/* The number of virtqueues (first in config array) */
+	__u8 num_vq;
+	/*
+	 * The number of bytes of feature bits.  Multiply by 2: one for host
+	 * features and one for guest acknowledgements.
+	 */
+	__u8 feature_len;
+	/* The number of bytes of the config array after virtqueues. */
+	__u8 config_len;
+	/* A status byte, written by the Guest. */
+	__u8 status;
+	__u8 config[0];
+};
+
+/*
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
+struct kvm_vqconfig {
+	/* The token returned with an interrupt. Set by the guest */
+	__u64 token;
+	/* The address of the virtio ring */
+	__u64 address;
+	/* The number of entries in the virtio_ring */
+	__u16 num;
+
+};
+
+#define KVM_S390_VIRTIO_NOTIFY		0
+#define KVM_S390_VIRTIO_RESET		1
+#define KVM_S390_VIRTIO_SET_STATUS	2
+
+#ifdef __KERNEL__
+/* early virtio console setup */
+#ifdef CONFIG_VIRTIO_CONSOLE
+extern void s390_virtio_console_init(void);
+#else
+static inline void s390_virtio_console_init(void)
+{
+}
+#endif /* CONFIG_VIRTIO_CONSOLE */
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/s390/include/asm/linkage.h b/arch/s390/include/asm/linkage.h
new file mode 100644
index 00000000000..291c2d01c44
--- /dev/null
+++ b/arch/s390/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/arch/s390/include/asm/local.h b/arch/s390/include/asm/local.h
new file mode 100644
index 00000000000..c11c530f74d
--- /dev/null
+++ b/arch/s390/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
new file mode 100644
index 00000000000..0bc51d52a89
--- /dev/null
+++ b/arch/s390/include/asm/lowcore.h
@@ -0,0 +1,433 @@
+/*
+ *  include/asm-s390/lowcore.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ */
+
+#ifndef _ASM_S390_LOWCORE_H
+#define _ASM_S390_LOWCORE_H
+
+#ifndef __s390x__
+#define __LC_EXT_OLD_PSW                0x018
+#define __LC_SVC_OLD_PSW                0x020
+#define __LC_PGM_OLD_PSW                0x028
+#define __LC_MCK_OLD_PSW                0x030
+#define __LC_IO_OLD_PSW                 0x038
+#define __LC_EXT_NEW_PSW                0x058
+#define __LC_SVC_NEW_PSW                0x060
+#define __LC_PGM_NEW_PSW                0x068
+#define __LC_MCK_NEW_PSW                0x070
+#define __LC_IO_NEW_PSW                 0x078
+#else /* !__s390x__ */
+#define __LC_EXT_OLD_PSW                0x0130
+#define __LC_SVC_OLD_PSW                0x0140
+#define __LC_PGM_OLD_PSW                0x0150
+#define __LC_MCK_OLD_PSW                0x0160
+#define __LC_IO_OLD_PSW                 0x0170
+#define __LC_EXT_NEW_PSW                0x01b0
+#define __LC_SVC_NEW_PSW                0x01c0
+#define __LC_PGM_NEW_PSW                0x01d0
+#define __LC_MCK_NEW_PSW                0x01e0
+#define __LC_IO_NEW_PSW                 0x01f0
+#endif /* !__s390x__ */
+
+#define __LC_IPL_PARMBLOCK_PTR		0x014
+#define __LC_EXT_PARAMS                 0x080
+#define __LC_CPU_ADDRESS                0x084
+#define __LC_EXT_INT_CODE               0x086
+
+#define __LC_SVC_ILC                    0x088
+#define __LC_SVC_INT_CODE               0x08A
+#define __LC_PGM_ILC                    0x08C
+#define __LC_PGM_INT_CODE               0x08E
+
+#define __LC_PER_ATMID			0x096
+#define __LC_PER_ADDRESS		0x098
+#define __LC_PER_ACCESS_ID		0x0A1
+#define __LC_AR_MODE_ID			0x0A3
+
+#define __LC_SUBCHANNEL_ID              0x0B8
+#define __LC_SUBCHANNEL_NR              0x0BA
+#define __LC_IO_INT_PARM                0x0BC
+#define __LC_IO_INT_WORD                0x0C0
+#define __LC_MCCK_CODE                  0x0E8
+
+#define __LC_LAST_BREAK 		0x110
+
+#define __LC_RETURN_PSW                 0x200
+
+#define __LC_SAVE_AREA                  0xC00
+
+#ifndef __s390x__
+#define __LC_IRB			0x208
+#define __LC_SYNC_ENTER_TIMER		0x248
+#define __LC_ASYNC_ENTER_TIMER		0x250
+#define __LC_EXIT_TIMER			0x258
+#define __LC_LAST_UPDATE_TIMER		0x260
+#define __LC_USER_TIMER			0x268
+#define __LC_SYSTEM_TIMER		0x270
+#define __LC_LAST_UPDATE_CLOCK		0x278
+#define __LC_STEAL_CLOCK		0x280
+#define __LC_RETURN_MCCK_PSW            0x288
+#define __LC_KERNEL_STACK               0xC40
+#define __LC_THREAD_INFO		0xC44
+#define __LC_ASYNC_STACK                0xC48
+#define __LC_KERNEL_ASCE		0xC4C
+#define __LC_USER_ASCE			0xC50
+#define __LC_PANIC_STACK                0xC54
+#define __LC_CPUID                      0xC60
+#define __LC_CPUADDR                    0xC68
+#define __LC_IPLDEV                     0xC7C
+#define __LC_CURRENT			0xC90
+#define __LC_INT_CLOCK			0xC98
+#else /* __s390x__ */
+#define __LC_IRB			0x210
+#define __LC_SYNC_ENTER_TIMER		0x250
+#define __LC_ASYNC_ENTER_TIMER		0x258
+#define __LC_EXIT_TIMER			0x260
+#define __LC_LAST_UPDATE_TIMER		0x268
+#define __LC_USER_TIMER			0x270
+#define __LC_SYSTEM_TIMER		0x278
+#define __LC_LAST_UPDATE_CLOCK		0x280
+#define __LC_STEAL_CLOCK		0x288
+#define __LC_RETURN_MCCK_PSW            0x290
+#define __LC_KERNEL_STACK               0xD40
+#define __LC_THREAD_INFO		0xD48
+#define __LC_ASYNC_STACK                0xD50
+#define __LC_KERNEL_ASCE		0xD58
+#define __LC_USER_ASCE			0xD60
+#define __LC_PANIC_STACK                0xD68
+#define __LC_CPUID			0xD80
+#define __LC_CPUADDR			0xD88
+#define __LC_IPLDEV                     0xDB8
+#define __LC_CURRENT			0xDD8
+#define __LC_INT_CLOCK			0xDE8
+#endif /* __s390x__ */
+
+
+#define __LC_PANIC_MAGIC		0xE00
+#ifndef __s390x__
+#define __LC_PFAULT_INTPARM             0x080
+#define __LC_CPU_TIMER_SAVE_AREA        0x0D8
+#define __LC_CLOCK_COMP_SAVE_AREA	0x0E0
+#define __LC_PSW_SAVE_AREA		0x100
+#define __LC_PREFIX_SAVE_AREA		0x108
+#define __LC_AREGS_SAVE_AREA            0x120
+#define __LC_FPREGS_SAVE_AREA		0x160
+#define __LC_GPREGS_SAVE_AREA           0x180
+#define __LC_CREGS_SAVE_AREA            0x1C0
+#else /* __s390x__ */
+#define __LC_PFAULT_INTPARM             0x11B8
+#define __LC_FPREGS_SAVE_AREA		0x1200
+#define __LC_GPREGS_SAVE_AREA           0x1280
+#define __LC_PSW_SAVE_AREA		0x1300
+#define __LC_PREFIX_SAVE_AREA		0x1318
+#define __LC_FP_CREG_SAVE_AREA		0x131C
+#define __LC_TODREG_SAVE_AREA		0x1324
+#define __LC_CPU_TIMER_SAVE_AREA        0x1328
+#define __LC_CLOCK_COMP_SAVE_AREA	0x1331
+#define __LC_AREGS_SAVE_AREA            0x1340
+#define __LC_CREGS_SAVE_AREA            0x1380
+#endif /* __s390x__ */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/processor.h>
+#include <linux/types.h>
+#include <asm/sigp.h>
+
+void restart_int_handler(void);
+void ext_int_handler(void);
+void system_call(void);
+void pgm_check_handler(void);
+void mcck_int_handler(void);
+void io_int_handler(void);
+
+struct save_area_s390 {
+	u32	ext_save;
+	u64	timer;
+	u64	clk_cmp;
+	u8	pad1[24];
+	u8	psw[8];
+	u32	pref_reg;
+	u8	pad2[20];
+	u32	acc_regs[16];
+	u64	fp_regs[4];
+	u32	gp_regs[16];
+	u32	ctrl_regs[16];
+}  __attribute__((packed));
+
+struct save_area_s390x {
+	u64	fp_regs[16];
+	u64	gp_regs[16];
+	u8	psw[16];
+	u8	pad1[8];
+	u32	pref_reg;
+	u32	fp_ctrl_reg;
+	u8	pad2[4];
+	u32	tod_reg;
+	u64	timer;
+	u64	clk_cmp;
+	u8	pad3[8];
+	u32	acc_regs[16];
+	u64	ctrl_regs[16];
+}  __attribute__((packed));
+
+union save_area {
+	struct save_area_s390	s390;
+	struct save_area_s390x	s390x;
+};
+
+#define SAVE_AREA_BASE_S390	0xd4
+#define SAVE_AREA_BASE_S390X	0x1200
+
+#ifndef __s390x__
+#define SAVE_AREA_SIZE sizeof(struct save_area_s390)
+#define SAVE_AREA_BASE SAVE_AREA_BASE_S390
+#else
+#define SAVE_AREA_SIZE sizeof(struct save_area_s390x)
+#define SAVE_AREA_BASE SAVE_AREA_BASE_S390X
+#endif
+
+struct _lowcore
+{
+#ifndef __s390x__
+        /* prefix area: defined by architecture */
+	psw_t        restart_psw;              /* 0x000 */
+	__u32        ccw2[4];                  /* 0x008 */
+	psw_t        external_old_psw;         /* 0x018 */
+	psw_t        svc_old_psw;              /* 0x020 */
+	psw_t        program_old_psw;          /* 0x028 */
+	psw_t        mcck_old_psw;             /* 0x030 */
+	psw_t        io_old_psw;               /* 0x038 */
+	__u8         pad1[0x58-0x40];          /* 0x040 */
+	psw_t        external_new_psw;         /* 0x058 */
+	psw_t        svc_new_psw;              /* 0x060 */
+	psw_t        program_new_psw;          /* 0x068 */
+	psw_t        mcck_new_psw;             /* 0x070 */
+	psw_t        io_new_psw;               /* 0x078 */
+	__u32        ext_params;               /* 0x080 */
+	__u16        cpu_addr;                 /* 0x084 */
+	__u16        ext_int_code;             /* 0x086 */
+        __u16        svc_ilc;                  /* 0x088 */
+        __u16        svc_code;                 /* 0x08a */
+        __u16        pgm_ilc;                  /* 0x08c */
+        __u16        pgm_code;                 /* 0x08e */
+	__u32        trans_exc_code;           /* 0x090 */
+	__u16        mon_class_num;            /* 0x094 */
+	__u16        per_perc_atmid;           /* 0x096 */
+	__u32        per_address;              /* 0x098 */
+	__u32        monitor_code;             /* 0x09c */
+	__u8         exc_access_id;            /* 0x0a0 */
+	__u8         per_access_id;            /* 0x0a1 */
+	__u8         pad2[0xB8-0xA2];          /* 0x0a2 */
+	__u16        subchannel_id;            /* 0x0b8 */
+	__u16        subchannel_nr;            /* 0x0ba */
+	__u32        io_int_parm;              /* 0x0bc */
+	__u32        io_int_word;              /* 0x0c0 */
+	__u8	     pad3[0xc8-0xc4];	       /* 0x0c4 */
+	__u32	     stfl_fac_list;	       /* 0x0c8 */
+	__u8	     pad4[0xd4-0xcc];	       /* 0x0cc */
+	__u32        extended_save_area_addr;  /* 0x0d4 */
+	__u32        cpu_timer_save_area[2];   /* 0x0d8 */
+	__u32        clock_comp_save_area[2];  /* 0x0e0 */
+	__u32        mcck_interruption_code[2]; /* 0x0e8 */
+	__u8	     pad5[0xf4-0xf0];	       /* 0x0f0 */
+	__u32        external_damage_code;     /* 0x0f4 */
+	__u32        failing_storage_address;  /* 0x0f8 */
+	__u8	     pad6[0x100-0xfc];	       /* 0x0fc */
+	__u32        st_status_fixed_logout[4];/* 0x100 */
+	__u8	     pad7[0x120-0x110];        /* 0x110 */
+	__u32        access_regs_save_area[16];/* 0x120 */
+	__u32        floating_pt_save_area[8]; /* 0x160 */
+	__u32        gpregs_save_area[16];     /* 0x180 */
+	__u32        cregs_save_area[16];      /* 0x1c0 */	
+
+        psw_t        return_psw;               /* 0x200 */
+	__u8	     irb[64];		       /* 0x208 */
+	__u64        sync_enter_timer;         /* 0x248 */
+	__u64        async_enter_timer;        /* 0x250 */
+	__u64        exit_timer;               /* 0x258 */
+	__u64        last_update_timer;        /* 0x260 */
+	__u64        user_timer;               /* 0x268 */
+	__u64        system_timer;             /* 0x270 */
+	__u64        last_update_clock;        /* 0x278 */
+	__u64        steal_clock;              /* 0x280 */
+        psw_t        return_mcck_psw;          /* 0x288 */
+	__u8         pad8[0xc00-0x290];        /* 0x290 */
+
+        /* System info area */
+	__u32        save_area[16];            /* 0xc00 */
+	__u32        kernel_stack;             /* 0xc40 */
+	__u32        thread_info;              /* 0xc44 */
+	__u32        async_stack;              /* 0xc48 */
+	__u32        kernel_asce;              /* 0xc4c */
+	__u32        user_asce;                /* 0xc50 */
+	__u32        panic_stack;              /* 0xc54 */
+	__u32	     user_exec_asce;	       /* 0xc58 */
+	__u8	     pad10[0xc60-0xc5c];       /* 0xc5c */
+	/* entry.S sensitive area start */
+	struct       cpuinfo_S390 cpu_data;    /* 0xc60 */
+	__u32        ipl_device;               /* 0xc7c */
+	/* entry.S sensitive area end */
+
+        /* SMP info area: defined by DJB */
+	__u64	     clock_comparator;	       /* 0xc80 */
+	__u32        ext_call_fast;            /* 0xc88 */
+	__u32        percpu_offset;            /* 0xc8c */
+	__u32        current_task;	       /* 0xc90 */
+	__u32        softirq_pending;	       /* 0xc94 */
+	__u64        int_clock;                /* 0xc98 */
+        __u8         pad11[0xe00-0xca0];       /* 0xca0 */
+
+        /* 0xe00 is used as indicator for dump tools */
+        /* whether the kernel died with panic() or not */
+        __u32        panic_magic;              /* 0xe00 */
+
+        /* Align to the top 1k of prefix area */
+	__u8         pad12[0x1000-0xe04];      /* 0xe04 */
+#else /* !__s390x__ */
+        /* prefix area: defined by architecture */
+	__u32        ccw1[2];                  /* 0x000 */
+	__u32        ccw2[4];                  /* 0x008 */
+	__u8         pad1[0x80-0x18];          /* 0x018 */
+	__u32        ext_params;               /* 0x080 */
+	__u16        cpu_addr;                 /* 0x084 */
+	__u16        ext_int_code;             /* 0x086 */
+        __u16        svc_ilc;                  /* 0x088 */
+        __u16        svc_code;                 /* 0x08a */
+        __u16        pgm_ilc;                  /* 0x08c */
+        __u16        pgm_code;                 /* 0x08e */
+	__u32        data_exc_code;            /* 0x090 */
+	__u16        mon_class_num;            /* 0x094 */
+	__u16        per_perc_atmid;           /* 0x096 */
+	addr_t       per_address;              /* 0x098 */
+	__u8         exc_access_id;            /* 0x0a0 */
+	__u8         per_access_id;            /* 0x0a1 */
+	__u8         op_access_id;             /* 0x0a2 */
+	__u8         ar_access_id;             /* 0x0a3 */
+	__u8         pad2[0xA8-0xA4];          /* 0x0a4 */
+	addr_t       trans_exc_code;           /* 0x0A0 */
+	addr_t       monitor_code;             /* 0x09c */
+	__u16        subchannel_id;            /* 0x0b8 */
+	__u16        subchannel_nr;            /* 0x0ba */
+	__u32        io_int_parm;              /* 0x0bc */
+	__u32        io_int_word;              /* 0x0c0 */
+	__u8         pad3[0xc8-0xc4];          /* 0x0c4 */
+	__u32        stfl_fac_list;            /* 0x0c8 */
+	__u8         pad4[0xe8-0xcc];          /* 0x0cc */
+	__u32        mcck_interruption_code[2]; /* 0x0e8 */
+	__u8         pad5[0xf4-0xf0];          /* 0x0f0 */
+	__u32        external_damage_code;     /* 0x0f4 */
+	addr_t       failing_storage_address;  /* 0x0f8 */
+	__u8         pad6[0x120-0x100];        /* 0x100 */
+	psw_t        restart_old_psw;          /* 0x120 */
+	psw_t        external_old_psw;         /* 0x130 */
+	psw_t        svc_old_psw;              /* 0x140 */
+	psw_t        program_old_psw;          /* 0x150 */
+	psw_t        mcck_old_psw;             /* 0x160 */
+	psw_t        io_old_psw;               /* 0x170 */
+	__u8         pad7[0x1a0-0x180];        /* 0x180 */
+	psw_t        restart_psw;              /* 0x1a0 */
+	psw_t        external_new_psw;         /* 0x1b0 */
+	psw_t        svc_new_psw;              /* 0x1c0 */
+	psw_t        program_new_psw;          /* 0x1d0 */
+	psw_t        mcck_new_psw;             /* 0x1e0 */
+	psw_t        io_new_psw;               /* 0x1f0 */
+        psw_t        return_psw;               /* 0x200 */
+	__u8	     irb[64];		       /* 0x210 */
+	__u64        sync_enter_timer;         /* 0x250 */
+	__u64        async_enter_timer;        /* 0x258 */
+	__u64        exit_timer;               /* 0x260 */
+	__u64        last_update_timer;        /* 0x268 */
+	__u64        user_timer;               /* 0x270 */
+	__u64        system_timer;             /* 0x278 */
+	__u64        last_update_clock;        /* 0x280 */
+	__u64        steal_clock;              /* 0x288 */
+        psw_t        return_mcck_psw;          /* 0x290 */
+        __u8         pad8[0xc00-0x2a0];        /* 0x2a0 */
+        /* System info area */
+	__u64        save_area[16];            /* 0xc00 */
+        __u8         pad9[0xd40-0xc80];        /* 0xc80 */
+ 	__u64        kernel_stack;             /* 0xd40 */
+	__u64        thread_info;              /* 0xd48 */
+	__u64        async_stack;              /* 0xd50 */
+	__u64        kernel_asce;              /* 0xd58 */
+	__u64        user_asce;                /* 0xd60 */
+	__u64        panic_stack;              /* 0xd68 */
+	__u64	     user_exec_asce;	       /* 0xd70 */
+	__u8	     pad10[0xd80-0xd78];       /* 0xd78 */
+	/* entry.S sensitive area start */
+	struct       cpuinfo_S390 cpu_data;    /* 0xd80 */
+	__u32        ipl_device;               /* 0xdb8 */
+	__u32        pad11;                    /* 0xdbc */
+	/* entry.S sensitive area end */
+
+        /* SMP info area: defined by DJB */
+	__u64	     clock_comparator;	       /* 0xdc0 */
+	__u64        ext_call_fast;            /* 0xdc8 */
+	__u64        percpu_offset;            /* 0xdd0 */
+	__u64        current_task;	       /* 0xdd8 */
+	__u32	     softirq_pending;	       /* 0xde0 */
+	__u32	     pad_0x0de4;	       /* 0xde4 */
+	__u64        int_clock;                /* 0xde8 */
+        __u8         pad12[0xe00-0xdf0];       /* 0xdf0 */
+
+        /* 0xe00 is used as indicator for dump tools */
+        /* whether the kernel died with panic() or not */
+        __u32        panic_magic;              /* 0xe00 */
+
+	__u8         pad13[0x11b8-0xe04];      /* 0xe04 */
+
+	/* 64 bit extparam used for pfault, diag 250 etc  */
+	__u64        ext_params2;               /* 0x11B8 */
+
+	__u8         pad14[0x1200-0x11C0];      /* 0x11C0 */
+
+        /* System info area */ 
+
+	__u64        floating_pt_save_area[16]; /* 0x1200 */
+	__u64        gpregs_save_area[16];      /* 0x1280 */
+	__u32        st_status_fixed_logout[4]; /* 0x1300 */
+	__u8         pad15[0x1318-0x1310];      /* 0x1310 */
+	__u32        prefixreg_save_area;       /* 0x1318 */
+	__u32        fpt_creg_save_area;        /* 0x131c */
+	__u8         pad16[0x1324-0x1320];      /* 0x1320 */
+	__u32        tod_progreg_save_area;     /* 0x1324 */
+	__u32        cpu_timer_save_area[2];    /* 0x1328 */
+	__u32        clock_comp_save_area[2];   /* 0x1330 */
+	__u8         pad17[0x1340-0x1338];      /* 0x1338 */
+	__u32        access_regs_save_area[16]; /* 0x1340 */ 
+	__u64        cregs_save_area[16];       /* 0x1380 */
+
+	/* align to the top of the prefix area */
+
+	__u8         pad18[0x2000-0x1400];      /* 0x1400 */
+#endif /* !__s390x__ */
+} __attribute__((packed)); /* End structure*/
+
+#define S390_lowcore (*((struct _lowcore *) 0))
+extern struct _lowcore *lowcore_ptr[];
+
+static inline void set_prefix(__u32 address)
+{
+	asm volatile("spx %0" : : "m" (address) : "memory");
+}
+
+static inline __u32 store_prefix(void)
+{
+	__u32 address;
+
+	asm volatile("stpx %0" : "=m" (address));
+	return address;
+}
+
+#define __PANIC_MAGIC           0xDEADC0DE
+
+#endif
+
+#endif
diff --git a/arch/s390/include/asm/mathemu.h b/arch/s390/include/asm/mathemu.h
new file mode 100644
index 00000000000..e8dd1ba8edb
--- /dev/null
+++ b/arch/s390/include/asm/mathemu.h
@@ -0,0 +1,29 @@
+/*
+ *  arch/s390/kernel/mathemu.h
+ *    IEEE floating point emulation.
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#ifndef __MATHEMU__
+#define __MATHEMU__
+
+extern int math_emu_b3(__u8 *, struct pt_regs *);
+extern int math_emu_ed(__u8 *, struct pt_regs *);
+extern int math_emu_ldr(__u8 *);
+extern int math_emu_ler(__u8 *);
+extern int math_emu_std(__u8 *, struct pt_regs *);
+extern int math_emu_ld(__u8 *, struct pt_regs *);
+extern int math_emu_ste(__u8 *, struct pt_regs *);
+extern int math_emu_le(__u8 *, struct pt_regs *);
+extern int math_emu_lfpc(__u8 *, struct pt_regs *);
+extern int math_emu_stfpc(__u8 *, struct pt_regs *);
+extern int math_emu_srnm(__u8 *, struct pt_regs *);
+
+#endif                                 /* __MATHEMU__                      */
+
+
+
+
diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h
new file mode 100644
index 00000000000..7839767d837
--- /dev/null
+++ b/arch/s390/include/asm/mman.h
@@ -0,0 +1,25 @@
+/*
+ *  include/asm-s390/mman.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/mman.h"
+ */
+
+#ifndef __S390_MMAN_H__
+#define __S390_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __S390_MMAN_H__ */
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
new file mode 100644
index 00000000000..5dd5e7b3476
--- /dev/null
+++ b/arch/s390/include/asm/mmu.h
@@ -0,0 +1,13 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+typedef struct {
+	struct list_head crst_list;
+	struct list_head pgtable_list;
+	unsigned long asce_bits;
+	unsigned long asce_limit;
+	int noexec;
+	int pgstes;
+} mm_context_t;
+
+#endif
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
new file mode 100644
index 00000000000..4c2fbf48c9c
--- /dev/null
+++ b/arch/s390/include/asm/mmu_context.h
@@ -0,0 +1,77 @@
+/*
+ *  include/asm-s390/mmu_context.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/mmu_context.h"
+ */
+
+#ifndef __S390_MMU_CONTEXT_H
+#define __S390_MMU_CONTEXT_H
+
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS;
+#ifdef CONFIG_64BIT
+	mm->context.asce_bits |= _ASCE_TYPE_REGION3;
+#endif
+	if (current->mm->context.pgstes) {
+		mm->context.noexec = 0;
+		mm->context.pgstes = 1;
+	} else {
+		mm->context.noexec = s390_noexec;
+		mm->context.pgstes = 0;
+	}
+	mm->context.asce_limit = STACK_TOP_MAX;
+	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
+	return 0;
+}
+
+#define destroy_context(mm)             do { } while (0)
+
+#ifndef __s390x__
+#define LCTL_OPCODE "lctl"
+#else
+#define LCTL_OPCODE "lctlg"
+#endif
+
+static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk)
+{
+	pgd_t *pgd = mm->pgd;
+
+	S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
+	if (switch_amode) {
+		/* Load primary space page table origin. */
+		pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd;
+		S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd);
+		asm volatile(LCTL_OPCODE" 1,1,%0\n"
+			     : : "m" (S390_lowcore.user_exec_asce) );
+	} else
+		/* Load home space page table origin. */
+		asm volatile(LCTL_OPCODE" 13,13,%0"
+			     : : "m" (S390_lowcore.user_asce) );
+	set_fs(current->thread.mm_segment);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	cpu_set(smp_processor_id(), next->cpu_vm_mask);
+	update_mm(next, tsk);
+}
+
+#define enter_lazy_tlb(mm,tsk)	do { } while (0)
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev,
+                               struct mm_struct *next)
+{
+        switch_mm(prev, next, current);
+}
+
+#endif /* __S390_MMU_CONTEXT_H */
diff --git a/arch/s390/include/asm/module.h b/arch/s390/include/asm/module.h
new file mode 100644
index 00000000000..1cc1c5af705
--- /dev/null
+++ b/arch/s390/include/asm/module.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_S390_MODULE_H
+#define _ASM_S390_MODULE_H
+/*
+ * This file contains the s390 architecture specific module code.
+ */
+
+struct mod_arch_syminfo
+{
+	unsigned long got_offset;
+	unsigned long plt_offset;
+	int got_initialized;
+	int plt_initialized;
+};
+
+struct mod_arch_specific
+{
+	/* Starting offset of got in the module core memory. */
+	unsigned long got_offset;
+	/* Starting offset of plt in the module core memory. */
+	unsigned long plt_offset;
+	/* Size of the got. */
+	unsigned long got_size;
+	/* Size of the plt. */
+	unsigned long plt_size;
+	/* Number of symbols in syminfo. */
+	int nsyms;
+	/* Additional symbol information (got and plt offsets). */
+	struct mod_arch_syminfo *syminfo;
+};
+
+#ifdef __s390x__
+#define ElfW(x) Elf64_ ## x
+#define ELFW(x) ELF64_ ## x
+#else
+#define ElfW(x) Elf32_ ## x
+#define ELFW(x) ELF32_ ## x
+#endif
+
+#define Elf_Addr ElfW(Addr)
+#define Elf_Rela ElfW(Rela)
+#define Elf_Shdr ElfW(Shdr)
+#define Elf_Sym ElfW(Sym)
+#define Elf_Ehdr ElfW(Ehdr)
+#define ELF_R_SYM ELFW(R_SYM)
+#define ELF_R_TYPE ELFW(R_TYPE)
+#endif /* _ASM_S390_MODULE_H */
diff --git a/arch/s390/include/asm/monwriter.h b/arch/s390/include/asm/monwriter.h
new file mode 100644
index 00000000000..f0cbf96c52e
--- /dev/null
+++ b/arch/s390/include/asm/monwriter.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-s390/monwriter.h
+ *
+ * Copyright (C) IBM Corp. 2006
+ * Character device driver for writing z/VM APPLDATA monitor records
+ * Version 1.0
+ * Author(s): Melissa Howland <melissah@us.ibm.com>
+ *
+ */
+
+#ifndef _ASM_390_MONWRITER_H
+#define _ASM_390_MONWRITER_H
+
+/* mon_function values */
+#define MONWRITE_START_INTERVAL	0x00 /* start interval recording */
+#define MONWRITE_STOP_INTERVAL	0x01 /* stop interval or config recording */
+#define MONWRITE_GEN_EVENT	0x02 /* generate event record */
+#define MONWRITE_START_CONFIG	0x03 /* start configuration recording */
+
+/* the header the app uses in its write() data */
+struct monwrite_hdr {
+	unsigned char mon_function;
+	unsigned short applid;
+	unsigned char record_num;
+	unsigned short version;
+	unsigned short release;
+	unsigned short mod_level;
+	unsigned short datalen;
+	unsigned char hdrlen;
+
+} __attribute__((packed));
+
+#endif /* _ASM_390_MONWRITER_H */
diff --git a/arch/s390/include/asm/msgbuf.h b/arch/s390/include/asm/msgbuf.h
new file mode 100644
index 00000000000..1bbdee92792
--- /dev/null
+++ b/arch/s390/include/asm/msgbuf.h
@@ -0,0 +1,37 @@
+#ifndef _S390_MSGBUF_H
+#define _S390_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifndef __s390x__
+	unsigned long	__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifndef __s390x__
+	unsigned long	__unused2;
+#endif /* ! __s390x__ */
+	__kernel_time_t msg_ctime;	/* last change time */
+#ifndef __s390x__
+	unsigned long	__unused3;
+#endif /* ! __s390x__ */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _S390_MSGBUF_H */
diff --git a/arch/s390/include/asm/mutex.h b/arch/s390/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/s390/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
new file mode 100644
index 00000000000..991ba939408
--- /dev/null
+++ b/arch/s390/include/asm/page.h
@@ -0,0 +1,155 @@
+/*
+ *  include/asm-s390/page.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ */
+
+#ifndef _S390_PAGE_H
+#define _S390_PAGE_H
+
+#include <linux/const.h>
+#include <asm/types.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT      12
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+#define PAGE_DEFAULT_ACC	0
+#define PAGE_DEFAULT_KEY	(PAGE_DEFAULT_ACC << 4)
+
+#define HPAGE_SHIFT	20
+#define HPAGE_SIZE	(1UL << HPAGE_SHIFT)
+#define HPAGE_MASK	(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+#define ARCH_HAS_SETCLEAR_HUGE_PTE
+#define ARCH_HAS_HUGE_PTE_TYPE
+#define ARCH_HAS_PREPARE_HUGEPAGE
+#define ARCH_HAS_HUGEPAGE_CLEAR_FLUSH
+
+#include <asm/setup.h>
+#ifndef __ASSEMBLY__
+
+static inline void clear_page(void *page)
+{
+	if (MACHINE_HAS_PFMF) {
+		asm volatile(
+			"	.insn	rre,0xb9af0000,%0,%1"
+			: : "d" (0x10000), "a" (page) : "memory", "cc");
+	} else {
+		register unsigned long reg1 asm ("1") = 0;
+		register void *reg2 asm ("2") = page;
+		register unsigned long reg3 asm ("3") = 4096;
+		asm volatile(
+			"	mvcl	2,0"
+			: "+d" (reg2), "+d" (reg3) : "d" (reg1)
+			: "memory", "cc");
+	}
+}
+
+static inline void copy_page(void *to, void *from)
+{
+	if (MACHINE_HAS_MVPG) {
+		register unsigned long reg0 asm ("0") = 0;
+		asm volatile(
+			"	mvpg	%0,%1"
+			: : "a" (to), "a" (from), "d" (reg0)
+			: "memory", "cc");
+	} else
+		asm volatile(
+			"	mvc	0(256,%0),0(%1)\n"
+			"	mvc	256(256,%0),256(%1)\n"
+			"	mvc	512(256,%0),512(%1)\n"
+			"	mvc	768(256,%0),768(%1)\n"
+			"	mvc	1024(256,%0),1024(%1)\n"
+			"	mvc	1280(256,%0),1280(%1)\n"
+			"	mvc	1536(256,%0),1536(%1)\n"
+			"	mvc	1792(256,%0),1792(%1)\n"
+			"	mvc	2048(256,%0),2048(%1)\n"
+			"	mvc	2304(256,%0),2304(%1)\n"
+			"	mvc	2560(256,%0),2560(%1)\n"
+			"	mvc	2816(256,%0),2816(%1)\n"
+			"	mvc	3072(256,%0),3072(%1)\n"
+			"	mvc	3328(256,%0),3328(%1)\n"
+			"	mvc	3584(256,%0),3584(%1)\n"
+			"	mvc	3840(256,%0),3840(%1)\n"
+			: : "a" (to), "a" (from) : "memory");
+}
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pud; } pud_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef pte_t *pgtable_t;
+
+#define pgprot_val(x)	((x).pgprot)
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pud_val(x)	((x).pud)
+#define pgd_val(x)      ((x).pgd)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+/* default storage key used for all pages */
+extern unsigned int default_storage_key;
+
+static inline void
+page_set_storage_key(unsigned long addr, unsigned int skey)
+{
+	asm volatile("sske %0,%1" : : "d" (skey), "a" (addr));
+}
+
+static inline unsigned int
+page_get_storage_key(unsigned long addr)
+{
+	unsigned int skey;
+
+	asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr), "0" (0));
+	return skey;
+}
+
+#ifdef CONFIG_PAGE_STATES
+
+struct page;
+void arch_free_page(struct page *page, int order);
+void arch_alloc_page(struct page *page, int order);
+
+#define HAVE_ARCH_FREE_PAGE
+#define HAVE_ARCH_ALLOC_PAGE
+
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define __PAGE_OFFSET           0x0UL
+#define PAGE_OFFSET             0x0UL
+#define __pa(x)                 (unsigned long)(x)
+#define __va(x)                 (void *)(unsigned long)(x)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _S390_PAGE_H */
diff --git a/arch/s390/include/asm/param.h b/arch/s390/include/asm/param.h
new file mode 100644
index 00000000000..34aaa460334
--- /dev/null
+++ b/arch/s390/include/asm/param.h
@@ -0,0 +1,30 @@
+/*
+ *  include/asm-s390/param.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/param.h"
+ */
+
+#ifndef _ASMS390_PARAM_H
+#define _ASMS390_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
new file mode 100644
index 00000000000..42a145c9ddd
--- /dev/null
+++ b/arch/s390/include/asm/pci.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_S390_PCI_H
+#define __ASM_S390_PCI_H
+
+/* S/390 systems don't have a PCI bus. This file is just here because some stupid .c code
+ * includes it even if CONFIG_PCI is not set.
+ */
+#define PCI_DMA_BUS_IS_PHYS (0)
+
+#endif /* __ASM_S390_PCI_H */
+
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
new file mode 100644
index 00000000000..408d60b4f75
--- /dev/null
+++ b/arch/s390/include/asm/percpu.h
@@ -0,0 +1,37 @@
+#ifndef __ARCH_S390_PERCPU__
+#define __ARCH_S390_PERCPU__
+
+#include <linux/compiler.h>
+#include <asm/lowcore.h>
+
+/*
+ * s390 uses its own implementation for per cpu data, the offset of
+ * the cpu local data area is cached in the cpu's lowcore memory.
+ * For 64 bit module code s390 forces the use of a GOT slot for the
+ * address of the per cpu variable. This is needed because the module
+ * may be more than 4G above the per cpu area.
+ */
+#if defined(__s390x__) && defined(MODULE)
+
+#define SHIFT_PERCPU_PTR(ptr,offset) (({			\
+	extern int simple_identifier_##var(void);	\
+	unsigned long *__ptr;				\
+	asm ( "larl %0, %1@GOTENT"		\
+	    : "=a" (__ptr) : "X" (ptr) );		\
+	(typeof(ptr))((*__ptr) + (offset));	}))
+
+#else
+
+#define SHIFT_PERCPU_PTR(ptr, offset) (({				\
+	extern int simple_identifier_##var(void);		\
+	unsigned long __ptr;					\
+	asm ( "" : "=a" (__ptr) : "0" (ptr) );			\
+	(typeof(ptr)) (__ptr + (offset)); }))
+
+#endif
+
+#define __my_cpu_offset S390_lowcore.percpu_offset
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_S390_PERCPU__ */
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
new file mode 100644
index 00000000000..f5b2bf3d7c1
--- /dev/null
+++ b/arch/s390/include/asm/pgalloc.h
@@ -0,0 +1,174 @@
+/*
+ *  include/asm-s390/pgalloc.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/pgalloc.h"
+ *    Copyright (C) 1994  Linus Torvalds
+ */
+
+#ifndef _S390_PGALLOC_H
+#define _S390_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/gfp.h>
+#include <linux/mm.h>
+
+#define check_pgt_cache()	do {} while (0)
+
+unsigned long *crst_table_alloc(struct mm_struct *, int);
+void crst_table_free(struct mm_struct *, unsigned long *);
+
+unsigned long *page_table_alloc(struct mm_struct *);
+void page_table_free(struct mm_struct *, unsigned long *);
+void disable_noexec(struct mm_struct *, struct task_struct *);
+
+static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
+{
+	*s = val;
+	n = (n / 256) - 1;
+	asm volatile(
+#ifdef CONFIG_64BIT
+		"	mvc	8(248,%0),0(%0)\n"
+#else
+		"	mvc	4(252,%0),0(%0)\n"
+#endif
+		"0:	mvc	256(256,%0),0(%0)\n"
+		"	la	%0,256(%0)\n"
+		"	brct	%1,0b\n"
+		: "+a" (s), "+d" (n));
+}
+
+static inline void crst_table_init(unsigned long *crst, unsigned long entry)
+{
+	clear_table(crst, entry, sizeof(unsigned long)*2048);
+	crst = get_shadow_table(crst);
+	if (crst)
+		clear_table(crst, entry, sizeof(unsigned long)*2048);
+}
+
+#ifndef __s390x__
+
+static inline unsigned long pgd_entry_type(struct mm_struct *mm)
+{
+	return _SEGMENT_ENTRY_EMPTY;
+}
+
+#define pud_alloc_one(mm,address)		({ BUG(); ((pud_t *)2); })
+#define pud_free(mm, x)				do { } while (0)
+
+#define pmd_alloc_one(mm,address)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(mm, x)				do { } while (0)
+
+#define pgd_populate(mm, pgd, pud)		BUG()
+#define pgd_populate_kernel(mm, pgd, pud)	BUG()
+
+#define pud_populate(mm, pud, pmd)		BUG()
+#define pud_populate_kernel(mm, pud, pmd)	BUG()
+
+#else /* __s390x__ */
+
+static inline unsigned long pgd_entry_type(struct mm_struct *mm)
+{
+	if (mm->context.asce_limit <= (1UL << 31))
+		return _SEGMENT_ENTRY_EMPTY;
+	if (mm->context.asce_limit <= (1UL << 42))
+		return _REGION3_ENTRY_EMPTY;
+	return _REGION2_ENTRY_EMPTY;
+}
+
+int crst_table_upgrade(struct mm_struct *, unsigned long limit);
+void crst_table_downgrade(struct mm_struct *, unsigned long limit);
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	unsigned long *table = crst_table_alloc(mm, mm->context.noexec);
+	if (table)
+		crst_table_init(table, _REGION3_ENTRY_EMPTY);
+	return (pud_t *) table;
+}
+#define pud_free(mm, pud) crst_table_free(mm, (unsigned long *) pud)
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
+{
+	unsigned long *table = crst_table_alloc(mm, mm->context.noexec);
+	if (table)
+		crst_table_init(table, _SEGMENT_ENTRY_EMPTY);
+	return (pmd_t *) table;
+}
+#define pmd_free(mm, pmd) crst_table_free(mm, (unsigned long *) pmd)
+
+static inline void pgd_populate_kernel(struct mm_struct *mm,
+				       pgd_t *pgd, pud_t *pud)
+{
+	pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud);
+}
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+{
+	pgd_populate_kernel(mm, pgd, pud);
+	if (mm->context.noexec) {
+		pgd = get_shadow_table(pgd);
+		pud = get_shadow_table(pud);
+		pgd_populate_kernel(mm, pgd, pud);
+	}
+}
+
+static inline void pud_populate_kernel(struct mm_struct *mm,
+				       pud_t *pud, pmd_t *pmd)
+{
+	pud_val(*pud) = _REGION3_ENTRY | __pa(pmd);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	pud_populate_kernel(mm, pud, pmd);
+	if (mm->context.noexec) {
+		pud = get_shadow_table(pud);
+		pmd = get_shadow_table(pmd);
+		pud_populate_kernel(mm, pud, pmd);
+	}
+}
+
+#endif /* __s390x__ */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	INIT_LIST_HEAD(&mm->context.crst_list);
+	INIT_LIST_HEAD(&mm->context.pgtable_list);
+	return (pgd_t *) crst_table_alloc(mm, s390_noexec);
+}
+#define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+				       pmd_t *pmd, pte_t *pte)
+{
+	pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm,
+				pmd_t *pmd, pgtable_t pte)
+{
+	pmd_populate_kernel(mm, pmd, pte);
+	if (mm->context.noexec) {
+		pmd = get_shadow_table(pmd);
+		pmd_populate_kernel(mm, pmd, pte + PTRS_PER_PTE);
+	}
+}
+
+#define pmd_pgtable(pmd) \
+	(pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE)
+
+/*
+ * page table entry allocation/free routines.
+ */
+#define pte_alloc_one_kernel(mm, vmaddr) ((pte_t *) page_table_alloc(mm))
+#define pte_alloc_one(mm, vmaddr) ((pte_t *) page_table_alloc(mm))
+
+#define pte_free_kernel(mm, pte) page_table_free(mm, (unsigned long *) pte)
+#define pte_free(mm, pte) page_table_free(mm, (unsigned long *) pte)
+
+#endif /* _S390_PGALLOC_H */
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
new file mode 100644
index 00000000000..0bdb704ae05
--- /dev/null
+++ b/arch/s390/include/asm/pgtable.h
@@ -0,0 +1,1093 @@
+/*
+ *  include/asm-s390/pgtable.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ *               Ulrich Weigand (weigand@de.ibm.com)
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/pgtable.h"
+ */
+
+#ifndef _ASM_S390_PGTABLE_H
+#define _ASM_S390_PGTABLE_H
+
+/*
+ * The Linux memory management assumes a three-level page table setup. For
+ * s390 31 bit we "fold" the mid level into the top-level page table, so
+ * that we physically have the same two-level page table as the s390 mmu
+ * expects in 31 bit mode. For s390 64 bit we use three of the five levels
+ * the hardware provides (region first and region second tables are not
+ * used).
+ *
+ * The "pgd_xxx()" functions are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the S390 page table tree.
+ */
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/mm_types.h>
+#include <asm/bitops.h>
+#include <asm/bug.h>
+#include <asm/processor.h>
+
+extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096)));
+extern void paging_init(void);
+extern void vmem_map_init(void);
+
+/*
+ * The S390 doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ */
+#define update_mmu_cache(vma, address, pte)     do { } while (0)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern char empty_zero_page[PAGE_SIZE];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page
+ * table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#ifndef __s390x__
+# define PMD_SHIFT	20
+# define PUD_SHIFT	20
+# define PGDIR_SHIFT	20
+#else /* __s390x__ */
+# define PMD_SHIFT	20
+# define PUD_SHIFT	31
+# define PGDIR_SHIFT	42
+#endif /* __s390x__ */
+
+#define PMD_SIZE        (1UL << PMD_SHIFT)
+#define PMD_MASK        (~(PMD_SIZE-1))
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: the S390 is two-level, so
+ * we don't really have any PMD directory physically.
+ * for S390 segment-table entries are combined to one PGD
+ * that leads to 1024 pte per pgd
+ */
+#define PTRS_PER_PTE	256
+#ifndef __s390x__
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PUD	1
+#else /* __s390x__ */
+#define PTRS_PER_PMD	2048
+#define PTRS_PER_PUD	2048
+#endif /* __s390x__ */
+#define PTRS_PER_PGD	2048
+
+#define FIRST_USER_ADDRESS  0
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e))
+#define pud_ERROR(e) \
+	printk("%s:%d: bad pud %p.\n", __FILE__, __LINE__, (void *) pud_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e))
+
+#ifndef __ASSEMBLY__
+/*
+ * The vmalloc area will always be on the topmost area of the kernel
+ * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc,
+ * which should be enough for any sane case.
+ * By putting vmalloc at the top, we maximise the gap between physical
+ * memory and vmalloc to catch misplaced memory accesses. As a side
+ * effect, this also makes sure that 64 bit module code cannot be used
+ * as system call address.
+ */
+#ifndef __s390x__
+#define VMALLOC_START	0x78000000UL
+#define VMALLOC_END	0x7e000000UL
+#define VMEM_MAP_END	0x80000000UL
+#else /* __s390x__ */
+#define VMALLOC_START	0x3e000000000UL
+#define VMALLOC_END	0x3e040000000UL
+#define VMEM_MAP_END	0x40000000000UL
+#endif /* __s390x__ */
+
+/*
+ * VMEM_MAX_PHYS is the highest physical address that can be added to the 1:1
+ * mapping. This needs to be calculated at compile time since the size of the
+ * VMEM_MAP is static but the size of struct page can change.
+ */
+#define VMEM_MAX_PAGES	((VMEM_MAP_END - VMALLOC_END) / sizeof(struct page))
+#define VMEM_MAX_PFN	min(VMALLOC_START >> PAGE_SHIFT, VMEM_MAX_PAGES)
+#define VMEM_MAX_PHYS	((VMEM_MAX_PFN << PAGE_SHIFT) & ~((16 << 20) - 1))
+#define vmemmap		((struct page *) VMALLOC_END)
+
+/*
+ * A 31 bit pagetable entry of S390 has following format:
+ *  |   PFRA          |    |  OS  |
+ * 0                   0IP0
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * I Page-Invalid Bit:    Page is not available for address-translation
+ * P Page-Protection Bit: Store access not possible for page
+ *
+ * A 31 bit segmenttable entry of S390 has following format:
+ *  |   P-table origin      |  |PTL
+ * 0                         IC
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * C Common-Segment Bit:     Segment is not private (PoP 3-30)
+ * PTL Page-Table-Length:    Page-table length (PTL+1*16 entries -> up to 256)
+ *
+ * The 31 bit segmenttable origin of S390 has following format:
+ *
+ *  |S-table origin   |     | STL |
+ * X                   **GPS
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * X Space-Switch event:
+ * G Segment-Invalid Bit:     *
+ * P Private-Space Bit:       Segment is not private (PoP 3-30)
+ * S Storage-Alteration:
+ * STL Segment-Table-Length:  Segment-table length (STL+1*16 entries -> up to 2048)
+ *
+ * A 64 bit pagetable entry of S390 has following format:
+ * |                     PFRA                         |0IP0|  OS  |
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Page-Invalid Bit:    Page is not available for address-translation
+ * P Page-Protection Bit: Store access not possible for page
+ *
+ * A 64 bit segmenttable entry of S390 has following format:
+ * |        P-table origin                              |      TT
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * C Common-Segment Bit:     Segment is not private (PoP 3-30)
+ * P Page-Protection Bit: Store access not possible for page
+ * TT Type 00
+ *
+ * A 64 bit region table entry of S390 has following format:
+ * |        S-table origin                             |   TF  TTTL
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * TT Type 01
+ * TF
+ * TL Table length
+ *
+ * The 64 bit regiontable origin of S390 has following format:
+ * |      region table origon                          |       DTTL
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * X Space-Switch event:
+ * G Segment-Invalid Bit:  
+ * P Private-Space Bit:    
+ * S Storage-Alteration:
+ * R Real space
+ * TL Table-Length:
+ *
+ * A storage key has the following format:
+ * | ACC |F|R|C|0|
+ *  0   3 4 5 6 7
+ * ACC: access key
+ * F  : fetch protection bit
+ * R  : referenced bit
+ * C  : changed bit
+ */
+
+/* Hardware bits in the page table entry */
+#define _PAGE_RO	0x200		/* HW read-only bit  */
+#define _PAGE_INVALID	0x400		/* HW invalid bit    */
+
+/* Software bits in the page table entry */
+#define _PAGE_SWT	0x001		/* SW pte type bit t */
+#define _PAGE_SWX	0x002		/* SW pte type bit x */
+#define _PAGE_SPECIAL	0x004		/* SW associated with special page */
+#define __HAVE_ARCH_PTE_SPECIAL
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_SPECIAL)
+
+/* Six different types of pages. */
+#define _PAGE_TYPE_EMPTY	0x400
+#define _PAGE_TYPE_NONE		0x401
+#define _PAGE_TYPE_SWAP		0x403
+#define _PAGE_TYPE_FILE		0x601	/* bit 0x002 is used for offset !! */
+#define _PAGE_TYPE_RO		0x200
+#define _PAGE_TYPE_RW		0x000
+#define _PAGE_TYPE_EX_RO	0x202
+#define _PAGE_TYPE_EX_RW	0x002
+
+/*
+ * Only four types for huge pages, using the invalid bit and protection bit
+ * of a segment table entry.
+ */
+#define _HPAGE_TYPE_EMPTY	0x020	/* _SEGMENT_ENTRY_INV */
+#define _HPAGE_TYPE_NONE	0x220
+#define _HPAGE_TYPE_RO		0x200	/* _SEGMENT_ENTRY_RO  */
+#define _HPAGE_TYPE_RW		0x000
+
+/*
+ * PTE type bits are rather complicated. handle_pte_fault uses pte_present,
+ * pte_none and pte_file to find out the pte type WITHOUT holding the page
+ * table lock. ptep_clear_flush on the other hand uses ptep_clear_flush to
+ * invalidate a given pte. ipte sets the hw invalid bit and clears all tlbs
+ * for the page. The page table entry is set to _PAGE_TYPE_EMPTY afterwards.
+ * This change is done while holding the lock, but the intermediate step
+ * of a previously valid pte with the hw invalid bit set can be observed by
+ * handle_pte_fault. That makes it necessary that all valid pte types with
+ * the hw invalid bit set must be distinguishable from the four pte types
+ * empty, none, swap and file.
+ *
+ *			irxt  ipte  irxt
+ * _PAGE_TYPE_EMPTY	1000   ->   1000
+ * _PAGE_TYPE_NONE	1001   ->   1001
+ * _PAGE_TYPE_SWAP	1011   ->   1011
+ * _PAGE_TYPE_FILE	11?1   ->   11?1
+ * _PAGE_TYPE_RO	0100   ->   1100
+ * _PAGE_TYPE_RW	0000   ->   1000
+ * _PAGE_TYPE_EX_RO	0110   ->   1110
+ * _PAGE_TYPE_EX_RW	0010   ->   1010
+ *
+ * pte_none is true for bits combinations 1000, 1010, 1100, 1110
+ * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001
+ * pte_file is true for bits combinations 1101, 1111
+ * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid.
+ */
+
+/* Page status table bits for virtualization */
+#define RCP_PCL_BIT	55
+#define RCP_HR_BIT	54
+#define RCP_HC_BIT	53
+#define RCP_GR_BIT	50
+#define RCP_GC_BIT	49
+
+#ifndef __s390x__
+
+/* Bits in the segment table address-space-control-element */
+#define _ASCE_SPACE_SWITCH	0x80000000UL	/* space switch event	    */
+#define _ASCE_ORIGIN_MASK	0x7ffff000UL	/* segment table origin	    */
+#define _ASCE_PRIVATE_SPACE	0x100	/* private space control	    */
+#define _ASCE_ALT_EVENT		0x80	/* storage alteration event control */
+#define _ASCE_TABLE_LENGTH	0x7f	/* 128 x 64 entries = 8k	    */
+
+/* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN	0x7fffffc0UL	/* page table origin	    */
+#define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
+#define _SEGMENT_ENTRY_COMMON	0x10	/* common segment bit		    */
+#define _SEGMENT_ENTRY_PTL	0x0f	/* page table length		    */
+
+#define _SEGMENT_ENTRY		(_SEGMENT_ENTRY_PTL)
+#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INV)
+
+#else /* __s390x__ */
+
+/* Bits in the segment/region table address-space-control-element */
+#define _ASCE_ORIGIN		~0xfffUL/* segment table origin		    */
+#define _ASCE_PRIVATE_SPACE	0x100	/* private space control	    */
+#define _ASCE_ALT_EVENT		0x80	/* storage alteration event control */
+#define _ASCE_SPACE_SWITCH	0x40	/* space switch event		    */
+#define _ASCE_REAL_SPACE	0x20	/* real space control		    */
+#define _ASCE_TYPE_MASK		0x0c	/* asce table type mask		    */
+#define _ASCE_TYPE_REGION1	0x0c	/* region first table type	    */
+#define _ASCE_TYPE_REGION2	0x08	/* region second table type	    */
+#define _ASCE_TYPE_REGION3	0x04	/* region third table type	    */
+#define _ASCE_TYPE_SEGMENT	0x00	/* segment table type		    */
+#define _ASCE_TABLE_LENGTH	0x03	/* region table length		    */
+
+/* Bits in the region table entry */
+#define _REGION_ENTRY_ORIGIN	~0xfffUL/* region/segment table origin	    */
+#define _REGION_ENTRY_INV	0x20	/* invalid region table entry	    */
+#define _REGION_ENTRY_TYPE_MASK	0x0c	/* region/segment table type mask   */
+#define _REGION_ENTRY_TYPE_R1	0x0c	/* region first table type	    */
+#define _REGION_ENTRY_TYPE_R2	0x08	/* region second table type	    */
+#define _REGION_ENTRY_TYPE_R3	0x04	/* region third table type	    */
+#define _REGION_ENTRY_LENGTH	0x03	/* region third length		    */
+
+#define _REGION1_ENTRY		(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_LENGTH)
+#define _REGION1_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INV)
+#define _REGION2_ENTRY		(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_LENGTH)
+#define _REGION2_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INV)
+#define _REGION3_ENTRY		(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH)
+#define _REGION3_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INV)
+
+/* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN	~0x7ffUL/* segment table origin		    */
+#define _SEGMENT_ENTRY_RO	0x200	/* page protection bit		    */
+#define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
+
+#define _SEGMENT_ENTRY		(0)
+#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INV)
+
+#define _SEGMENT_ENTRY_LARGE	0x400	/* STE-format control, large page   */
+#define _SEGMENT_ENTRY_CO	0x100	/* change-recording override   */
+
+#endif /* __s390x__ */
+
+/*
+ * A user page table pointer has the space-switch-event bit, the
+ * private-space-control bit and the storage-alteration-event-control
+ * bit set. A kernel page table pointer doesn't need them.
+ */
+#define _ASCE_USER_BITS		(_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \
+				 _ASCE_ALT_EVENT)
+
+/* Bits int the storage key */
+#define _PAGE_CHANGED    0x02          /* HW changed bit                   */
+#define _PAGE_REFERENCED 0x04          /* HW referenced bit                */
+
+/*
+ * Page protection definitions.
+ */
+#define PAGE_NONE	__pgprot(_PAGE_TYPE_NONE)
+#define PAGE_RO		__pgprot(_PAGE_TYPE_RO)
+#define PAGE_RW		__pgprot(_PAGE_TYPE_RW)
+#define PAGE_EX_RO	__pgprot(_PAGE_TYPE_EX_RO)
+#define PAGE_EX_RW	__pgprot(_PAGE_TYPE_EX_RW)
+
+#define PAGE_KERNEL	PAGE_RW
+#define PAGE_COPY	PAGE_RO
+
+/*
+ * Dependent on the EXEC_PROTECT option s390 can do execute protection.
+ * Write permission always implies read permission. In theory with a
+ * primary/secondary page table execute only can be implemented but
+ * it would cost an additional bit in the pte to distinguish all the
+ * different pte types. To avoid that execute permission currently
+ * implies read permission as well.
+ */
+         /*xwr*/
+#define __P000	PAGE_NONE
+#define __P001	PAGE_RO
+#define __P010	PAGE_RO
+#define __P011	PAGE_RO
+#define __P100	PAGE_EX_RO
+#define __P101	PAGE_EX_RO
+#define __P110	PAGE_EX_RO
+#define __P111	PAGE_EX_RO
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_RO
+#define __S010	PAGE_RW
+#define __S011	PAGE_RW
+#define __S100	PAGE_EX_RO
+#define __S101	PAGE_EX_RO
+#define __S110	PAGE_EX_RW
+#define __S111	PAGE_EX_RW
+
+#ifndef __s390x__
+# define PxD_SHADOW_SHIFT	1
+#else /* __s390x__ */
+# define PxD_SHADOW_SHIFT	2
+#endif /* __s390x__ */
+
+static inline void *get_shadow_table(void *table)
+{
+	unsigned long addr, offset;
+	struct page *page;
+
+	addr = (unsigned long) table;
+	offset = addr & ((PAGE_SIZE << PxD_SHADOW_SHIFT) - 1);
+	page = virt_to_page((void *)(addr ^ offset));
+	return (void *)(addr_t)(page->index ? (page->index | offset) : 0UL);
+}
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t entry)
+{
+	*ptep = entry;
+	if (mm->context.noexec) {
+		if (!(pte_val(entry) & _PAGE_INVALID) &&
+		    (pte_val(entry) & _PAGE_SWX))
+			pte_val(entry) |= _PAGE_RO;
+		else
+			pte_val(entry) = _PAGE_TYPE_EMPTY;
+		ptep[PTRS_PER_PTE] = entry;
+	}
+}
+
+/*
+ * pgd/pmd/pte query functions
+ */
+#ifndef __s390x__
+
+static inline int pgd_present(pgd_t pgd) { return 1; }
+static inline int pgd_none(pgd_t pgd)    { return 0; }
+static inline int pgd_bad(pgd_t pgd)     { return 0; }
+
+static inline int pud_present(pud_t pud) { return 1; }
+static inline int pud_none(pud_t pud)	 { return 0; }
+static inline int pud_bad(pud_t pud)	 { return 0; }
+
+#else /* __s390x__ */
+
+static inline int pgd_present(pgd_t pgd)
+{
+	if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
+		return 1;
+	return (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) != 0UL;
+}
+
+static inline int pgd_none(pgd_t pgd)
+{
+	if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
+		return 0;
+	return (pgd_val(pgd) & _REGION_ENTRY_INV) != 0UL;
+}
+
+static inline int pgd_bad(pgd_t pgd)
+{
+	/*
+	 * With dynamic page table levels the pgd can be a region table
+	 * entry or a segment table entry. Check for the bit that are
+	 * invalid for either table entry.
+	 */
+	unsigned long mask =
+		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV &
+		~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
+	return (pgd_val(pgd) & mask) != 0;
+}
+
+static inline int pud_present(pud_t pud)
+{
+	if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
+		return 1;
+	return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL;
+}
+
+static inline int pud_none(pud_t pud)
+{
+	if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
+		return 0;
+	return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	/*
+	 * With dynamic page table levels the pud can be a region table
+	 * entry or a segment table entry. Check for the bit that are
+	 * invalid for either table entry.
+	 */
+	unsigned long mask =
+		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV &
+		~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
+	return (pud_val(pud) & mask) != 0;
+}
+
+#endif /* __s390x__ */
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL;
+}
+
+static inline int pmd_none(pmd_t pmd)
+{
+	return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL;
+}
+
+static inline int pmd_bad(pmd_t pmd)
+{
+	unsigned long mask = ~_SEGMENT_ENTRY_ORIGIN & ~_SEGMENT_ENTRY_INV;
+	return (pmd_val(pmd) & mask) != _SEGMENT_ENTRY;
+}
+
+static inline int pte_none(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_INVALID) && !(pte_val(pte) & _PAGE_SWT);
+}
+
+static inline int pte_present(pte_t pte)
+{
+	unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT | _PAGE_SWX;
+	return (pte_val(pte) & mask) == _PAGE_TYPE_NONE ||
+		(!(pte_val(pte) & _PAGE_INVALID) &&
+		 !(pte_val(pte) & _PAGE_SWT));
+}
+
+static inline int pte_file(pte_t pte)
+{
+	unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT;
+	return (pte_val(pte) & mask) == _PAGE_TYPE_FILE;
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_SPECIAL);
+}
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(a,b)  (pte_val(a) == pte_val(b))
+
+static inline void rcp_lock(pte_t *ptep)
+{
+#ifdef CONFIG_PGSTE
+	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+	preempt_disable();
+	while (test_and_set_bit(RCP_PCL_BIT, pgste))
+		;
+#endif
+}
+
+static inline void rcp_unlock(pte_t *ptep)
+{
+#ifdef CONFIG_PGSTE
+	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+	clear_bit(RCP_PCL_BIT, pgste);
+	preempt_enable();
+#endif
+}
+
+/* forward declaration for SetPageUptodate in page-flags.h*/
+static inline void page_clear_dirty(struct page *page);
+#include <linux/page-flags.h>
+
+static inline void ptep_rcp_copy(pte_t *ptep)
+{
+#ifdef CONFIG_PGSTE
+	struct page *page = virt_to_page(pte_val(*ptep));
+	unsigned int skey;
+	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+
+	skey = page_get_storage_key(page_to_phys(page));
+	if (skey & _PAGE_CHANGED)
+		set_bit_simple(RCP_GC_BIT, pgste);
+	if (skey & _PAGE_REFERENCED)
+		set_bit_simple(RCP_GR_BIT, pgste);
+	if (test_and_clear_bit_simple(RCP_HC_BIT, pgste))
+		SetPageDirty(page);
+	if (test_and_clear_bit_simple(RCP_HR_BIT, pgste))
+		SetPageReferenced(page);
+#endif
+}
+
+/*
+ * query functions pte_write/pte_dirty/pte_young only work if
+ * pte_present() is true. Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_RO) == 0;
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	/* A pte is neither clean nor dirty on s/390. The dirty bit
+	 * is in the storage key. See page_test_and_clear_dirty for
+	 * details.
+	 */
+	return 0;
+}
+
+static inline int pte_young(pte_t pte)
+{
+	/* A pte is neither young nor old on s/390. The young bit
+	 * is in the storage key. See page_test_and_clear_young for
+	 * details.
+	 */
+	return 0;
+}
+
+/*
+ * pgd/pmd/pte modification functions
+ */
+
+#ifndef __s390x__
+
+#define pgd_clear(pgd)		do { } while (0)
+#define pud_clear(pud)		do { } while (0)
+
+#else /* __s390x__ */
+
+static inline void pgd_clear_kernel(pgd_t * pgd)
+{
+	if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2)
+		pgd_val(*pgd) = _REGION2_ENTRY_EMPTY;
+}
+
+static inline void pgd_clear(pgd_t * pgd)
+{
+	pgd_t *shadow = get_shadow_table(pgd);
+
+	pgd_clear_kernel(pgd);
+	if (shadow)
+		pgd_clear_kernel(shadow);
+}
+
+static inline void pud_clear_kernel(pud_t *pud)
+{
+	if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
+		pud_val(*pud) = _REGION3_ENTRY_EMPTY;
+}
+
+static inline void pud_clear(pud_t *pud)
+{
+	pud_t *shadow = get_shadow_table(pud);
+
+	pud_clear_kernel(pud);
+	if (shadow)
+		pud_clear_kernel(shadow);
+}
+
+#endif /* __s390x__ */
+
+static inline void pmd_clear_kernel(pmd_t * pmdp)
+{
+	pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY;
+}
+
+static inline void pmd_clear(pmd_t *pmd)
+{
+	pmd_t *shadow = get_shadow_table(pmd);
+
+	pmd_clear_kernel(pmd);
+	if (shadow)
+		pmd_clear_kernel(shadow);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	if (mm->context.pgstes)
+		ptep_rcp_copy(ptep);
+	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	if (mm->context.noexec)
+		pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
+}
+
+/*
+ * The following pte modification functions only work if
+ * pte_present() is true. Undefined behaviour if not..
+ */
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) &= _PAGE_CHG_MASK;
+	pte_val(pte) |= pgprot_val(newprot);
+	return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	/* Do not clobber _PAGE_TYPE_NONE pages!  */
+	if (!(pte_val(pte) & _PAGE_INVALID))
+		pte_val(pte) |= _PAGE_RO;
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_RO;
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	/* The only user of pte_mkclean is the fork() code.
+	   We must *not* clear the *physical* page dirty bit
+	   just because fork() wants to clear the dirty bit in
+	   *one* of the page's mappings.  So we just do nothing. */
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	/* We do not explicitly set the dirty bit because the
+	 * sske instruction is slow. It is faster to let the
+	 * next instruction set the dirty bit.
+	 */
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	/* S/390 doesn't keep its dirty/referenced bit in the pte.
+	 * There is no point in clearing the real referenced bit.
+	 */
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	/* S/390 doesn't keep its dirty/referenced bit in the pte.
+	 * There is no point in setting the real referenced bit.
+	 */
+	return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_SPECIAL;
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_PGSTE
+	unsigned long physpage;
+	int young;
+	unsigned long *pgste;
+
+	if (!vma->vm_mm->context.pgstes)
+		return 0;
+	physpage = pte_val(*ptep) & PAGE_MASK;
+	pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+
+	young = ((page_get_storage_key(physpage) & _PAGE_REFERENCED) != 0);
+	rcp_lock(ptep);
+	if (young)
+		set_bit_simple(RCP_GR_BIT, pgste);
+	young |= test_and_clear_bit_simple(RCP_HR_BIT, pgste);
+	rcp_unlock(ptep);
+	return young;
+#endif
+	return 0;
+}
+
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
+					 unsigned long address, pte_t *ptep)
+{
+	/* No need to flush TLB
+	 * On s390 reference bits are in storage key and never in TLB
+	 * With virtualization we handle the reference bit, without we
+	 * we can simply return */
+#ifdef CONFIG_PGSTE
+	return ptep_test_and_clear_young(vma, address, ptep);
+#endif
+	return 0;
+}
+
+static inline void __ptep_ipte(unsigned long address, pte_t *ptep)
+{
+	if (!(pte_val(*ptep) & _PAGE_INVALID)) {
+#ifndef __s390x__
+		/* pto must point to the start of the segment table */
+		pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00);
+#else
+		/* ipte in zarch mode can do the math */
+		pte_t *pto = ptep;
+#endif
+		asm volatile(
+			"	ipte	%2,%3"
+			: "=m" (*ptep) : "m" (*ptep),
+			  "a" (pto), "a" (address));
+	}
+}
+
+static inline void ptep_invalidate(struct mm_struct *mm,
+				   unsigned long address, pte_t *ptep)
+{
+	if (mm->context.pgstes) {
+		rcp_lock(ptep);
+		__ptep_ipte(address, ptep);
+		ptep_rcp_copy(ptep);
+		pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+		rcp_unlock(ptep);
+		return;
+	}
+	__ptep_ipte(address, ptep);
+	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	if (mm->context.noexec) {
+		__ptep_ipte(address, ptep + PTRS_PER_PTE);
+		pte_val(*(ptep + PTRS_PER_PTE)) = _PAGE_TYPE_EMPTY;
+	}
+}
+
+/*
+ * This is hard to understand. ptep_get_and_clear and ptep_clear_flush
+ * both clear the TLB for the unmapped pte. The reason is that
+ * ptep_get_and_clear is used in common code (e.g. change_pte_range)
+ * to modify an active pte. The sequence is
+ *   1) ptep_get_and_clear
+ *   2) set_pte_at
+ *   3) flush_tlb_range
+ * On s390 the tlb needs to get flushed with the modification of the pte
+ * if the pte is active. The only way how this can be implemented is to
+ * have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range
+ * is a nop.
+ */
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define ptep_get_and_clear(__mm, __address, __ptep)			\
+({									\
+	pte_t __pte = *(__ptep);					\
+	if (atomic_read(&(__mm)->mm_users) > 1 ||			\
+	    (__mm) != current->active_mm)				\
+		ptep_invalidate(__mm, __address, __ptep);		\
+	else								\
+		pte_clear((__mm), (__address), (__ptep));		\
+	__pte;								\
+})
+
+#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
+static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
+				     unsigned long address, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	ptep_invalidate(vma->vm_mm, address, ptep);
+	return pte;
+}
+
+/*
+ * The batched pte unmap code uses ptep_get_and_clear_full to clear the
+ * ptes. Here an optimization is possible. tlb_gather_mmu flushes all
+ * tlbs of an mm if it can guarantee that the ptes of the mm_struct
+ * cannot be accessed while the batched unmap is running. In this case
+ * full==1 and a simple pte_clear is enough. See tlb.h.
+ */
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
+					    unsigned long addr,
+					    pte_t *ptep, int full)
+{
+	pte_t pte = *ptep;
+
+	if (full)
+		pte_clear(mm, addr, ptep);
+	else
+		ptep_invalidate(mm, addr, ptep);
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define ptep_set_wrprotect(__mm, __addr, __ptep)			\
+({									\
+	pte_t __pte = *(__ptep);					\
+	if (pte_write(__pte)) {						\
+		if (atomic_read(&(__mm)->mm_users) > 1 ||		\
+		    (__mm) != current->active_mm)			\
+			ptep_invalidate(__mm, __addr, __ptep);		\
+		set_pte_at(__mm, __addr, __ptep, pte_wrprotect(__pte));	\
+	}								\
+})
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty)	\
+({									\
+	int __changed = !pte_same(*(__ptep), __entry);			\
+	if (__changed) {						\
+		ptep_invalidate((__vma)->vm_mm, __addr, __ptep);	\
+		set_pte_at((__vma)->vm_mm, __addr, __ptep, __entry);	\
+	}								\
+	__changed;							\
+})
+
+/*
+ * Test and clear dirty bit in storage key.
+ * We can't clear the changed bit atomically. This is a potential
+ * race against modification of the referenced bit. This function
+ * should therefore only be called if it is not mapped in any
+ * address space.
+ */
+#define __HAVE_ARCH_PAGE_TEST_DIRTY
+static inline int page_test_dirty(struct page *page)
+{
+	return (page_get_storage_key(page_to_phys(page)) & _PAGE_CHANGED) != 0;
+}
+
+#define __HAVE_ARCH_PAGE_CLEAR_DIRTY
+static inline void page_clear_dirty(struct page *page)
+{
+	page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY);
+}
+
+/*
+ * Test and clear referenced bit in storage key.
+ */
+#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG
+static inline int page_test_and_clear_young(struct page *page)
+{
+	unsigned long physpage = page_to_phys(page);
+	int ccode;
+
+	asm volatile(
+		"	rrbe	0,%1\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (ccode) : "a" (physpage) : "cc" );
+	return ccode & 2;
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
+{
+	pte_t __pte;
+	pte_val(__pte) = physpage + pgprot_val(pgprot);
+	return __pte;
+}
+
+static inline pte_t mk_pte(struct page *page, pgprot_t pgprot)
+{
+	unsigned long physpage = page_to_phys(page);
+
+	return mk_pte_phys(physpage, pgprot);
+}
+
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
+
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#ifndef __s390x__
+
+#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN)
+#define pud_deref(pmd) ({ BUG(); 0UL; })
+#define pgd_deref(pmd) ({ BUG(); 0UL; })
+
+#define pud_offset(pgd, address) ((pud_t *) pgd)
+#define pmd_offset(pud, address) ((pmd_t *) pud + pmd_index(address))
+
+#else /* __s390x__ */
+
+#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN)
+#define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN)
+#define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN)
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+	pud_t *pud = (pud_t *) pgd;
+	if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2)
+		pud = (pud_t *) pgd_deref(*pgd);
+	return pud  + pud_index(address);
+}
+
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
+{
+	pmd_t *pmd = (pmd_t *) pud;
+	if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
+		pmd = (pmd_t *) pud_deref(*pud);
+	return pmd + pmd_index(address);
+}
+
+#endif /* __s390x__ */
+
+#define pfn_pte(pfn,pgprot) mk_pte_phys(__pa((pfn) << PAGE_SHIFT),(pgprot))
+#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+/* Find an entry in the lowest level page table.. */
+#define pte_offset(pmd, addr) ((pte_t *) pmd_deref(*(pmd)) + pte_index(addr))
+#define pte_offset_kernel(pmd, address) pte_offset(pmd,address)
+#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_offset_map_nested(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+/*
+ * 31 bit swap entry format:
+ * A page-table entry has some bits we have to treat in a special way.
+ * Bits 0, 20 and bit 23 have to be zero, otherwise an specification
+ * exception will occur instead of a page translation exception. The
+ * specifiation exception has the bad habit not to store necessary
+ * information in the lowcore.
+ * Bit 21 and bit 22 are the page invalid bit and the page protection
+ * bit. We set both to indicate a swapped page.
+ * Bit 30 and 31 are used to distinguish the different page types. For
+ * a swapped page these bits need to be zero.
+ * This leaves the bits 1-19 and bits 24-29 to store type and offset.
+ * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
+ * plus 24 for the offset.
+ * 0|     offset        |0110|o|type |00|
+ * 0 0000000001111111111 2222 2 22222 33
+ * 0 1234567890123456789 0123 4 56789 01
+ *
+ * 64 bit swap entry format:
+ * A page-table entry has some bits we have to treat in a special way.
+ * Bits 52 and bit 55 have to be zero, otherwise an specification
+ * exception will occur instead of a page translation exception. The
+ * specifiation exception has the bad habit not to store necessary
+ * information in the lowcore.
+ * Bit 53 and bit 54 are the page invalid bit and the page protection
+ * bit. We set both to indicate a swapped page.
+ * Bit 62 and 63 are used to distinguish the different page types. For
+ * a swapped page these bits need to be zero.
+ * This leaves the bits 0-51 and bits 56-61 to store type and offset.
+ * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
+ * plus 56 for the offset.
+ * |                      offset                        |0110|o|type |00|
+ *  0000000000111111111122222222223333333333444444444455 5555 5 55566 66
+ *  0123456789012345678901234567890123456789012345678901 2345 6 78901 23
+ */
+#ifndef __s390x__
+#define __SWP_OFFSET_MASK (~0UL >> 12)
+#else
+#define __SWP_OFFSET_MASK (~0UL >> 11)
+#endif
+static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{
+	pte_t pte;
+	offset &= __SWP_OFFSET_MASK;
+	pte_val(pte) = _PAGE_TYPE_SWAP | ((type & 0x1f) << 2) |
+		((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
+	return pte;
+}
+
+#define __swp_type(entry)	(((entry).val >> 2) & 0x1f)
+#define __swp_offset(entry)	(((entry).val >> 11) | (((entry).val >> 7) & 1))
+#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
+
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#ifndef __s390x__
+# define PTE_FILE_MAX_BITS	26
+#else /* __s390x__ */
+# define PTE_FILE_MAX_BITS	59
+#endif /* __s390x__ */
+
+#define pte_to_pgoff(__pte) \
+	((((__pte).pte >> 12) << 7) + (((__pte).pte >> 1) & 0x7f))
+
+#define pgoff_to_pte(__off) \
+	((pte_t) { ((((__off) & 0x7f) << 1) + (((__off) >> 7) << 12)) \
+		   | _PAGE_TYPE_FILE })
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)   (1)
+
+extern int vmem_add_mapping(unsigned long start, unsigned long size);
+extern int vmem_remove_mapping(unsigned long start, unsigned long size);
+extern int s390_enable_sie(void);
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _S390_PAGE_H */
diff --git a/arch/s390/include/asm/poll.h b/arch/s390/include/asm/poll.h
new file mode 100644
index 00000000000..c98509d3149
--- /dev/null
+++ b/arch/s390/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h
new file mode 100644
index 00000000000..397d93fba3a
--- /dev/null
+++ b/arch/s390/include/asm/posix_types.h
@@ -0,0 +1,111 @@
+/*
+ *  include/asm-s390/posix_types.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/posix_types.h"
+ */
+
+#ifndef __ARCH_S390_POSIX_TYPES_H
+#define __ARCH_S390_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned long   __kernel_size_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+#ifndef __s390x__
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned short  __kernel_uid_t;
+typedef unsigned short  __kernel_gid_t;
+typedef int             __kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#else /* __s390x__ */
+
+typedef unsigned int    __kernel_ino_t;
+typedef unsigned int    __kernel_mode_t;
+typedef unsigned int    __kernel_nlink_t;
+typedef int             __kernel_ipc_pid_t;
+typedef unsigned int    __kernel_uid_t;
+typedef unsigned int    __kernel_gid_t;
+typedef long            __kernel_ssize_t;
+typedef long            __kernel_ptrdiff_t;
+typedef unsigned long   __kernel_sigset_t;      /* at least 32 bits */
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#endif /* __s390x__ */
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+        int     val[2];
+#else                        /* !defined(__KERNEL__) && !defined(__USE_ALL)*/
+        int     __val[2];
+#endif                       /* !defined(__KERNEL__) && !defined(__USE_ALL)*/
+} __kernel_fsid_t;
+
+
+#ifdef __KERNEL__
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, const __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (fdsetp->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+#undef  __FD_ZERO
+#define __FD_ZERO(fdsetp) \
+	((void) memset ((void *) (fdsetp), 0, sizeof (__kernel_fd_set)))
+
+#endif     /* __KERNEL__ */
+
+#endif
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
new file mode 100644
index 00000000000..4af80af2a88
--- /dev/null
+++ b/arch/s390/include/asm/processor.h
@@ -0,0 +1,360 @@
+/*
+ *  include/asm-s390/processor.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/processor.h"
+ *    Copyright (C) 1994, Linus Torvalds
+ */
+
+#ifndef __ASM_S390_PROCESSOR_H
+#define __ASM_S390_PROCESSOR_H
+
+#include <asm/ptrace.h>
+
+#ifdef __KERNEL__
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+typedef struct
+{
+        unsigned int version :  8;
+        unsigned int ident   : 24;
+        unsigned int machine : 16;
+        unsigned int unused  : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+static inline void get_cpu_id(cpuid_t *ptr)
+{
+	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
+}
+
+struct cpuinfo_S390
+{
+        cpuid_t  cpu_id;
+        __u16    cpu_addr;
+        __u16    cpu_nr;
+        unsigned long loops_per_jiffy;
+        unsigned long *pgd_quick;
+#ifdef __s390x__
+        unsigned long *pmd_quick;
+#endif /* __s390x__ */
+        unsigned long *pte_quick;
+        unsigned long pgtable_cache_sz;
+};
+
+extern void s390_adjust_jiffies(void);
+extern void print_cpu_info(struct cpuinfo_S390 *);
+extern int get_cpu_capability(unsigned int *);
+
+/*
+ * User space process size: 2GB for 31 bit, 4TB for 64 bit.
+ */
+#ifndef __s390x__
+
+#define TASK_SIZE		(1UL << 31)
+#define TASK_UNMAPPED_BASE	(1UL << 30)
+
+#else /* __s390x__ */
+
+#define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk,TIF_31BIT) ? \
+					(1UL << 31) : (1UL << 53))
+#define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_31BIT) ? \
+					(1UL << 30) : (1UL << 41))
+#define TASK_SIZE		TASK_SIZE_OF(current)
+
+#endif /* __s390x__ */
+
+#ifdef __KERNEL__
+
+#ifndef __s390x__
+#define STACK_TOP		(1UL << 31)
+#define STACK_TOP_MAX		(1UL << 31)
+#else /* __s390x__ */
+#define STACK_TOP		(1UL << (test_thread_flag(TIF_31BIT) ? 31:42))
+#define STACK_TOP_MAX		(1UL << 42)
+#endif /* __s390x__ */
+
+
+#endif
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+typedef struct {
+        __u32 ar4;
+} mm_segment_t;
+
+/*
+ * Thread structure
+ */
+struct thread_struct {
+	s390_fp_regs fp_regs;
+	unsigned int  acrs[NUM_ACRS];
+        unsigned long ksp;              /* kernel stack pointer             */
+	mm_segment_t mm_segment;
+        unsigned long prot_addr;        /* address of protection-excep.     */
+        unsigned int trap_no;
+        per_struct per_info;
+	/* Used to give failing instruction back to user for ieee exceptions */
+	unsigned long ieee_instruction_pointer; 
+        /* pfault_wait is used to block the process on a pfault event */
+	unsigned long pfault_wait;
+};
+
+typedef struct thread_struct thread_struct;
+
+/*
+ * Stack layout of a C stack frame.
+ */
+#ifndef __PACK_STACK
+struct stack_frame {
+	unsigned long back_chain;
+	unsigned long empty1[5];
+	unsigned long gprs[10];
+	unsigned int  empty2[8];
+};
+#else
+struct stack_frame {
+	unsigned long empty1[5];
+	unsigned int  empty2[8];
+	unsigned long gprs[10];
+	unsigned long back_chain;
+};
+#endif
+
+#define ARCH_MIN_TASKALIGN	8
+
+#define INIT_THREAD {							\
+	.ksp = sizeof(init_stack) + (unsigned long) &init_stack,	\
+}
+
+/*
+ * Do necessary setup to start up a new thread.
+ */
+#define start_thread(regs, new_psw, new_stackp) do {		\
+	set_fs(USER_DS);					\
+	regs->psw.mask	= psw_user_bits;			\
+	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;		\
+	regs->gprs[15]	= new_stackp;				\
+} while (0)
+
+#define start_thread31(regs, new_psw, new_stackp) do {		\
+	set_fs(USER_DS);					\
+	regs->psw.mask	= psw_user32_bits;			\
+	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;		\
+	regs->gprs[15]	= new_stackp;				\
+	crst_table_downgrade(current->mm, 1UL << 31);		\
+} while (0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+struct seq_file;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/*
+ * Print register of task into buffer. Used in fs/proc/array.c.
+ */
+extern void task_show_regs(struct seq_file *m, struct task_struct *task);
+
+extern void show_code(struct pt_regs *regs);
+
+unsigned long get_wchan(struct task_struct *p);
+#define task_pt_regs(tsk) ((struct pt_regs *) \
+        (task_stack_page(tsk) + THREAD_SIZE) - 1)
+#define KSTK_EIP(tsk)	(task_pt_regs(tsk)->psw.addr)
+#define KSTK_ESP(tsk)	(task_pt_regs(tsk)->gprs[15])
+
+/*
+ * Give up the time slice of the virtual PU.
+ */
+static inline void cpu_relax(void)
+{
+	if (MACHINE_HAS_DIAG44)
+		asm volatile("diag 0,0,68");
+	barrier();
+}
+
+static inline void psw_set_key(unsigned int key)
+{
+	asm volatile("spka 0(%0)" : : "d" (key));
+}
+
+/*
+ * Set PSW to specified value.
+ */
+static inline void __load_psw(psw_t psw)
+{
+#ifndef __s390x__
+	asm volatile("lpsw  0(%0)" : : "a" (&psw), "m" (psw) : "cc");
+#else
+	asm volatile("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc");
+#endif
+}
+
+/*
+ * Set PSW mask to specified value, while leaving the
+ * PSW addr pointing to the next instruction.
+ */
+
+static inline void __load_psw_mask (unsigned long mask)
+{
+	unsigned long addr;
+	psw_t psw;
+
+	psw.mask = mask;
+
+#ifndef __s390x__
+	asm volatile(
+		"	basr	%0,0\n"
+		"0:	ahi	%0,1f-0b\n"
+		"	st	%0,4(%1)\n"
+		"	lpsw	0(%1)\n"
+		"1:"
+		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc");
+#else /* __s390x__ */
+	asm volatile(
+		"	larl	%0,1f\n"
+		"	stg	%0,8(%1)\n"
+		"	lpswe	0(%1)\n"
+		"1:"
+		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc");
+#endif /* __s390x__ */
+}
+ 
+/*
+ * Function to stop a processor until an interruption occurred
+ */
+static inline void enabled_wait(void)
+{
+	__load_psw_mask(PSW_BASE_BITS | PSW_MASK_IO | PSW_MASK_EXT |
+			PSW_MASK_MCHECK | PSW_MASK_WAIT | PSW_DEFAULT_KEY);
+}
+
+/*
+ * Function to drop a processor into disabled wait state
+ */
+
+static inline void disabled_wait(unsigned long code)
+{
+        unsigned long ctl_buf;
+        psw_t dw_psw;
+
+        dw_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT;
+        dw_psw.addr = code;
+        /* 
+         * Store status and then load disabled wait psw,
+         * the processor is dead afterwards
+         */
+#ifndef __s390x__
+	asm volatile(
+		"	stctl	0,0,0(%2)\n"
+		"	ni	0(%2),0xef\n"	/* switch off protection */
+		"	lctl	0,0,0(%2)\n"
+		"	stpt	0xd8\n"		/* store timer */
+		"	stckc	0xe0\n"		/* store clock comparator */
+		"	stpx	0x108\n"	/* store prefix register */
+		"	stam	0,15,0x120\n"	/* store access registers */
+		"	std	0,0x160\n"	/* store f0 */
+		"	std	2,0x168\n"	/* store f2 */
+		"	std	4,0x170\n"	/* store f4 */
+		"	std	6,0x178\n"	/* store f6 */
+		"	stm	0,15,0x180\n"	/* store general registers */
+		"	stctl	0,15,0x1c0\n"	/* store control registers */
+		"	oi	0x1c0,0x10\n"	/* fake protection bit */
+		"	lpsw	0(%1)"
+		: "=m" (ctl_buf)
+		: "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc");
+#else /* __s390x__ */
+	asm volatile(
+		"	stctg	0,0,0(%2)\n"
+		"	ni	4(%2),0xef\n"	/* switch off protection */
+		"	lctlg	0,0,0(%2)\n"
+		"	lghi	1,0x1000\n"
+		"	stpt	0x328(1)\n"	/* store timer */
+		"	stckc	0x330(1)\n"	/* store clock comparator */
+		"	stpx	0x318(1)\n"	/* store prefix register */
+		"	stam	0,15,0x340(1)\n"/* store access registers */
+		"	stfpc	0x31c(1)\n"	/* store fpu control */
+		"	std	0,0x200(1)\n"	/* store f0 */
+		"	std	1,0x208(1)\n"	/* store f1 */
+		"	std	2,0x210(1)\n"	/* store f2 */
+		"	std	3,0x218(1)\n"	/* store f3 */
+		"	std	4,0x220(1)\n"	/* store f4 */
+		"	std	5,0x228(1)\n"	/* store f5 */
+		"	std	6,0x230(1)\n"	/* store f6 */
+		"	std	7,0x238(1)\n"	/* store f7 */
+		"	std	8,0x240(1)\n"	/* store f8 */
+		"	std	9,0x248(1)\n"	/* store f9 */
+		"	std	10,0x250(1)\n"	/* store f10 */
+		"	std	11,0x258(1)\n"	/* store f11 */
+		"	std	12,0x260(1)\n"	/* store f12 */
+		"	std	13,0x268(1)\n"	/* store f13 */
+		"	std	14,0x270(1)\n"	/* store f14 */
+		"	std	15,0x278(1)\n"	/* store f15 */
+		"	stmg	0,15,0x280(1)\n"/* store general registers */
+		"	stctg	0,15,0x380(1)\n"/* store control registers */
+		"	oi	0x384(1),0x10\n"/* fake protection bit */
+		"	lpswe	0(%1)"
+		: "=m" (ctl_buf)
+		: "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc", "0");
+#endif /* __s390x__ */
+}
+
+/*
+ * Basic Machine Check/Program Check Handler.
+ */
+
+extern void s390_base_mcck_handler(void);
+extern void s390_base_pgm_handler(void);
+extern void s390_base_ext_handler(void);
+
+extern void (*s390_base_mcck_handler_fn)(void);
+extern void (*s390_base_pgm_handler_fn)(void);
+extern void (*s390_base_ext_handler_fn)(void);
+
+#define ARCH_LOW_ADDRESS_LIMIT	0x7fffffffUL
+
+#endif
+
+/*
+ * Helper macro for exception table entries
+ */
+#ifndef __s390x__
+#define EX_TABLE(_fault,_target)			\
+	".section __ex_table,\"a\"\n"			\
+	"	.align 4\n"				\
+	"	.long  " #_fault "," #_target "\n"	\
+	".previous\n"
+#else
+#define EX_TABLE(_fault,_target)			\
+	".section __ex_table,\"a\"\n"			\
+	"	.align 8\n"				\
+	"	.quad  " #_fault "," #_target "\n"	\
+	".previous\n"
+#endif
+
+#endif                                 /* __ASM_S390_PROCESSOR_H           */
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
new file mode 100644
index 00000000000..af2c9ac28a0
--- /dev/null
+++ b/arch/s390/include/asm/ptrace.h
@@ -0,0 +1,499 @@
+/*
+ *  include/asm-s390/ptrace.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ */
+
+#ifndef _S390_PTRACE_H
+#define _S390_PTRACE_H
+
+/*
+ * Offsets in the user_regs_struct. They are used for the ptrace
+ * system call and in entry.S
+ */
+#ifndef __s390x__
+
+#define PT_PSWMASK  0x00
+#define PT_PSWADDR  0x04
+#define PT_GPR0     0x08
+#define PT_GPR1     0x0C
+#define PT_GPR2     0x10
+#define PT_GPR3     0x14
+#define PT_GPR4     0x18
+#define PT_GPR5     0x1C
+#define PT_GPR6     0x20
+#define PT_GPR7     0x24
+#define PT_GPR8     0x28
+#define PT_GPR9     0x2C
+#define PT_GPR10    0x30
+#define PT_GPR11    0x34
+#define PT_GPR12    0x38
+#define PT_GPR13    0x3C
+#define PT_GPR14    0x40
+#define PT_GPR15    0x44
+#define PT_ACR0     0x48
+#define PT_ACR1     0x4C
+#define PT_ACR2     0x50
+#define PT_ACR3     0x54
+#define PT_ACR4	    0x58
+#define PT_ACR5	    0x5C
+#define PT_ACR6	    0x60
+#define PT_ACR7	    0x64
+#define PT_ACR8	    0x68
+#define PT_ACR9	    0x6C
+#define PT_ACR10    0x70
+#define PT_ACR11    0x74
+#define PT_ACR12    0x78
+#define PT_ACR13    0x7C
+#define PT_ACR14    0x80
+#define PT_ACR15    0x84
+#define PT_ORIGGPR2 0x88
+#define PT_FPC	    0x90
+/*
+ * A nasty fact of life that the ptrace api
+ * only supports passing of longs.
+ */
+#define PT_FPR0_HI  0x98
+#define PT_FPR0_LO  0x9C
+#define PT_FPR1_HI  0xA0
+#define PT_FPR1_LO  0xA4
+#define PT_FPR2_HI  0xA8
+#define PT_FPR2_LO  0xAC
+#define PT_FPR3_HI  0xB0
+#define PT_FPR3_LO  0xB4
+#define PT_FPR4_HI  0xB8
+#define PT_FPR4_LO  0xBC
+#define PT_FPR5_HI  0xC0
+#define PT_FPR5_LO  0xC4
+#define PT_FPR6_HI  0xC8
+#define PT_FPR6_LO  0xCC
+#define PT_FPR7_HI  0xD0
+#define PT_FPR7_LO  0xD4
+#define PT_FPR8_HI  0xD8
+#define PT_FPR8_LO  0XDC
+#define PT_FPR9_HI  0xE0
+#define PT_FPR9_LO  0xE4
+#define PT_FPR10_HI 0xE8
+#define PT_FPR10_LO 0xEC
+#define PT_FPR11_HI 0xF0
+#define PT_FPR11_LO 0xF4
+#define PT_FPR12_HI 0xF8
+#define PT_FPR12_LO 0xFC
+#define PT_FPR13_HI 0x100
+#define PT_FPR13_LO 0x104
+#define PT_FPR14_HI 0x108
+#define PT_FPR14_LO 0x10C
+#define PT_FPR15_HI 0x110
+#define PT_FPR15_LO 0x114
+#define PT_CR_9	    0x118
+#define PT_CR_10    0x11C
+#define PT_CR_11    0x120
+#define PT_IEEE_IP  0x13C
+#define PT_LASTOFF  PT_IEEE_IP
+#define PT_ENDREGS  0x140-1
+
+#define GPR_SIZE	4
+#define CR_SIZE		4
+
+#define STACK_FRAME_OVERHEAD	96	/* size of minimum stack frame */
+
+#else /* __s390x__ */
+
+#define PT_PSWMASK  0x00
+#define PT_PSWADDR  0x08
+#define PT_GPR0     0x10
+#define PT_GPR1     0x18
+#define PT_GPR2     0x20
+#define PT_GPR3     0x28
+#define PT_GPR4     0x30
+#define PT_GPR5     0x38
+#define PT_GPR6     0x40
+#define PT_GPR7     0x48
+#define PT_GPR8     0x50
+#define PT_GPR9     0x58
+#define PT_GPR10    0x60
+#define PT_GPR11    0x68
+#define PT_GPR12    0x70
+#define PT_GPR13    0x78
+#define PT_GPR14    0x80
+#define PT_GPR15    0x88
+#define PT_ACR0     0x90
+#define PT_ACR1     0x94
+#define PT_ACR2     0x98
+#define PT_ACR3     0x9C
+#define PT_ACR4	    0xA0
+#define PT_ACR5	    0xA4
+#define PT_ACR6	    0xA8
+#define PT_ACR7	    0xAC
+#define PT_ACR8	    0xB0
+#define PT_ACR9	    0xB4
+#define PT_ACR10    0xB8
+#define PT_ACR11    0xBC
+#define PT_ACR12    0xC0
+#define PT_ACR13    0xC4
+#define PT_ACR14    0xC8
+#define PT_ACR15    0xCC
+#define PT_ORIGGPR2 0xD0
+#define PT_FPC	    0xD8
+#define PT_FPR0     0xE0
+#define PT_FPR1     0xE8
+#define PT_FPR2     0xF0
+#define PT_FPR3     0xF8
+#define PT_FPR4     0x100
+#define PT_FPR5     0x108
+#define PT_FPR6     0x110
+#define PT_FPR7     0x118
+#define PT_FPR8     0x120
+#define PT_FPR9     0x128
+#define PT_FPR10    0x130
+#define PT_FPR11    0x138
+#define PT_FPR12    0x140
+#define PT_FPR13    0x148
+#define PT_FPR14    0x150
+#define PT_FPR15    0x158
+#define PT_CR_9     0x160
+#define PT_CR_10    0x168
+#define PT_CR_11    0x170
+#define PT_IEEE_IP  0x1A8
+#define PT_LASTOFF  PT_IEEE_IP
+#define PT_ENDREGS  0x1B0-1
+
+#define GPR_SIZE	8
+#define CR_SIZE		8
+
+#define STACK_FRAME_OVERHEAD    160      /* size of minimum stack frame */
+
+#endif /* __s390x__ */
+
+#define NUM_GPRS	16
+#define NUM_FPRS	16
+#define NUM_CRS		16
+#define NUM_ACRS	16
+
+#define FPR_SIZE	8
+#define FPC_SIZE	4
+#define FPC_PAD_SIZE	4 /* gcc insists on aligning the fpregs */
+#define ACR_SIZE	4
+
+
+#define PTRACE_OLDSETOPTIONS         21
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+typedef union
+{
+	float   f;
+	double  d;
+        __u64   ui;
+	struct
+	{
+		__u32 hi;
+		__u32 lo;
+	} fp;
+} freg_t;
+
+typedef struct
+{
+	__u32   fpc;
+	freg_t  fprs[NUM_FPRS];              
+} s390_fp_regs;
+
+#define FPC_EXCEPTION_MASK      0xF8000000
+#define FPC_FLAGS_MASK          0x00F80000
+#define FPC_DXC_MASK            0x0000FF00
+#define FPC_RM_MASK             0x00000003
+#define FPC_VALID_MASK          0xF8F8FF03
+
+/* this typedef defines how a Program Status Word looks like */
+typedef struct 
+{
+        unsigned long mask;
+        unsigned long addr;
+} __attribute__ ((aligned(8))) psw_t;
+
+typedef struct
+{
+	__u32	mask;
+	__u32	addr;
+} __attribute__ ((aligned(8))) psw_compat_t;
+
+#ifndef __s390x__
+
+#define PSW_MASK_PER		0x40000000UL
+#define PSW_MASK_DAT		0x04000000UL
+#define PSW_MASK_IO		0x02000000UL
+#define PSW_MASK_EXT		0x01000000UL
+#define PSW_MASK_KEY		0x00F00000UL
+#define PSW_MASK_MCHECK		0x00040000UL
+#define PSW_MASK_WAIT		0x00020000UL
+#define PSW_MASK_PSTATE		0x00010000UL
+#define PSW_MASK_ASC		0x0000C000UL
+#define PSW_MASK_CC		0x00003000UL
+#define PSW_MASK_PM		0x00000F00UL
+
+#define PSW_ADDR_AMODE		0x80000000UL
+#define PSW_ADDR_INSN		0x7FFFFFFFUL
+
+#define PSW_BASE_BITS		0x00080000UL
+#define PSW_DEFAULT_KEY		(((unsigned long) PAGE_DEFAULT_ACC) << 20)
+
+#define PSW_ASC_PRIMARY		0x00000000UL
+#define PSW_ASC_ACCREG		0x00004000UL
+#define PSW_ASC_SECONDARY	0x00008000UL
+#define PSW_ASC_HOME		0x0000C000UL
+
+#else /* __s390x__ */
+
+#define PSW_MASK_PER		0x4000000000000000UL
+#define PSW_MASK_DAT		0x0400000000000000UL
+#define PSW_MASK_IO		0x0200000000000000UL
+#define PSW_MASK_EXT		0x0100000000000000UL
+#define PSW_MASK_KEY		0x00F0000000000000UL
+#define PSW_MASK_MCHECK		0x0004000000000000UL
+#define PSW_MASK_WAIT		0x0002000000000000UL
+#define PSW_MASK_PSTATE		0x0001000000000000UL
+#define PSW_MASK_ASC		0x0000C00000000000UL
+#define PSW_MASK_CC		0x0000300000000000UL
+#define PSW_MASK_PM		0x00000F0000000000UL
+
+#define PSW_ADDR_AMODE		0x0000000000000000UL
+#define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL
+
+#define PSW_BASE_BITS		0x0000000180000000UL
+#define PSW_BASE32_BITS		0x0000000080000000UL
+#define PSW_DEFAULT_KEY		(((unsigned long) PAGE_DEFAULT_ACC) << 52)
+
+#define PSW_ASC_PRIMARY		0x0000000000000000UL
+#define PSW_ASC_ACCREG		0x0000400000000000UL
+#define PSW_ASC_SECONDARY	0x0000800000000000UL
+#define PSW_ASC_HOME		0x0000C00000000000UL
+
+extern long psw_user32_bits;
+
+#endif /* __s390x__ */
+
+extern long psw_kernel_bits;
+extern long psw_user_bits;
+
+/* This macro merges a NEW PSW mask specified by the user into
+   the currently active PSW mask CURRENT, modifying only those
+   bits in CURRENT that the user may be allowed to change: this
+   is the condition code and the program mask bits.  */
+#define PSW_MASK_MERGE(CURRENT,NEW) \
+	(((CURRENT) & ~(PSW_MASK_CC|PSW_MASK_PM)) | \
+	 ((NEW) & (PSW_MASK_CC|PSW_MASK_PM)))
+
+/*
+ * The s390_regs structure is used to define the elf_gregset_t.
+ */
+typedef struct
+{
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned int  acrs[NUM_ACRS];
+	unsigned long orig_gpr2;
+} s390_regs;
+
+typedef struct
+{
+	psw_compat_t	psw;
+	__u32		gprs[NUM_GPRS];
+	__u32		acrs[NUM_ACRS];
+	__u32		orig_gpr2;
+} s390_compat_regs;
+
+
+#ifdef __KERNEL__
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * The pt_regs struct defines the way the registers are stored on
+ * the stack during a system call.
+ */
+struct pt_regs 
+{
+	unsigned long args[1];
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned long orig_gpr2;
+	unsigned short ilc;
+	unsigned short trap;
+};
+#endif
+
+/*
+ * Now for the program event recording (trace) definitions.
+ */
+typedef struct
+{
+	unsigned long cr[3];
+} per_cr_words;
+
+#define PER_EM_MASK 0xE8000000UL
+
+typedef	struct
+{
+#ifdef __s390x__
+	unsigned                       : 32;
+#endif /* __s390x__ */
+	unsigned em_branching          : 1;
+	unsigned em_instruction_fetch  : 1;
+	/*
+	 * Switching on storage alteration automatically fixes
+	 * the storage alteration event bit in the users std.
+	 */
+	unsigned em_storage_alteration : 1;
+	unsigned em_gpr_alt_unused     : 1;
+	unsigned em_store_real_address : 1;
+	unsigned                       : 3;
+	unsigned branch_addr_ctl       : 1;
+	unsigned                       : 1;
+	unsigned storage_alt_space_ctl : 1;
+	unsigned                       : 21;
+	unsigned long starting_addr;
+	unsigned long ending_addr;
+} per_cr_bits;
+
+typedef struct
+{
+	unsigned short perc_atmid;
+	unsigned long address;
+	unsigned char access_id;
+} per_lowcore_words;
+
+typedef struct
+{
+	unsigned perc_branching          : 1;
+	unsigned perc_instruction_fetch  : 1;
+	unsigned perc_storage_alteration : 1;
+	unsigned perc_gpr_alt_unused     : 1;
+	unsigned perc_store_real_address : 1;
+	unsigned                         : 3;
+	unsigned atmid_psw_bit_31        : 1;
+	unsigned atmid_validity_bit      : 1;
+	unsigned atmid_psw_bit_32        : 1;
+	unsigned atmid_psw_bit_5         : 1;
+	unsigned atmid_psw_bit_16        : 1;
+	unsigned atmid_psw_bit_17        : 1;
+	unsigned si                      : 2;
+	unsigned long address;
+	unsigned                         : 4;
+	unsigned access_id               : 4;
+} per_lowcore_bits;
+
+typedef struct
+{
+	union {
+		per_cr_words   words;
+		per_cr_bits    bits;
+	} control_regs;
+	/*
+	 * Use these flags instead of setting em_instruction_fetch
+	 * directly they are used so that single stepping can be
+	 * switched on & off while not affecting other tracing
+	 */
+	unsigned  single_step       : 1;
+	unsigned  instruction_fetch : 1;
+	unsigned                    : 30;
+	/*
+	 * These addresses are copied into cr10 & cr11 if single
+	 * stepping is switched off
+	 */
+	unsigned long starting_addr;
+	unsigned long ending_addr;
+	union {
+		per_lowcore_words words;
+		per_lowcore_bits  bits;
+	} lowcore; 
+} per_struct;
+
+typedef struct
+{
+	unsigned int  len;
+	unsigned long kernel_addr;
+	unsigned long process_addr;
+} ptrace_area;
+
+/*
+ * S/390 specific non posix ptrace requests. I chose unusual values so
+ * they are unlikely to clash with future ptrace definitions.
+ */
+#define PTRACE_PEEKUSR_AREA           0x5000
+#define PTRACE_POKEUSR_AREA           0x5001
+#define PTRACE_PEEKTEXT_AREA	      0x5002
+#define PTRACE_PEEKDATA_AREA	      0x5003
+#define PTRACE_POKETEXT_AREA	      0x5004
+#define PTRACE_POKEDATA_AREA 	      0x5005
+
+/*
+ * PT_PROT definition is loosely based on hppa bsd definition in
+ * gdb/hppab-nat.c
+ */
+#define PTRACE_PROT                       21
+
+typedef enum
+{
+	ptprot_set_access_watchpoint,
+	ptprot_set_write_watchpoint,
+	ptprot_disable_watchpoint
+} ptprot_flags;
+
+typedef struct
+{
+	unsigned long lowaddr;
+	unsigned long hiaddr;
+	ptprot_flags prot;
+} ptprot_area;                     
+
+/* Sequence of bytes for breakpoint illegal instruction.  */
+#define S390_BREAKPOINT     {0x0,0x1}
+#define S390_BREAKPOINT_U16 ((__u16)0x0001)
+#define S390_SYSCALL_OPCODE ((__u16)0x0a00)
+#define S390_SYSCALL_SIZE   2
+
+/*
+ * The user_regs_struct defines the way the user registers are
+ * store on the stack for signal handling.
+ */
+struct user_regs_struct
+{
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned int  acrs[NUM_ACRS];
+	unsigned long orig_gpr2;
+	s390_fp_regs fp_regs;
+	/*
+	 * These per registers are in here so that gdb can modify them
+	 * itself as there is no "official" ptrace interface for hardware
+	 * watchpoints. This is the way intel does it.
+	 */
+	per_struct per_info;
+	unsigned long ieee_instruction_pointer; 
+	/* Used to give failing instruction back to user for ieee exceptions */
+};
+
+#ifdef __KERNEL__
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+#define arch_has_single_step()	(1)
+struct task_struct;
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
+#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
+#define regs_return_value(regs)((regs)->gprs[2])
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs * regs);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#endif /* _S390_PTRACE_H */
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
new file mode 100644
index 00000000000..6813772171f
--- /dev/null
+++ b/arch/s390/include/asm/qdio.h
@@ -0,0 +1,382 @@
+/*
+ * linux/include/asm-s390/qdio.h
+ *
+ * Copyright 2000,2008 IBM Corp.
+ * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
+ *	      Jan Glauber <jang@linux.vnet.ibm.com>
+ *
+ */
+#ifndef __QDIO_H__
+#define __QDIO_H__
+
+#include <linux/interrupt.h>
+#include <asm/cio.h>
+#include <asm/ccwdev.h>
+
+#define QDIO_MAX_QUEUES_PER_IRQ		32
+#define QDIO_MAX_BUFFERS_PER_Q		128
+#define QDIO_MAX_BUFFERS_MASK		(QDIO_MAX_BUFFERS_PER_Q - 1)
+#define QDIO_MAX_ELEMENTS_PER_BUFFER	16
+#define QDIO_SBAL_SIZE			256
+
+#define QDIO_QETH_QFMT			0
+#define QDIO_ZFCP_QFMT			1
+#define QDIO_IQDIO_QFMT			2
+
+/**
+ * struct qdesfmt0 - queue descriptor, format 0
+ * @sliba: storage list information block address
+ * @sla: storage list address
+ * @slsba: storage list state block address
+ * @akey: access key for DLIB
+ * @bkey: access key for SL
+ * @ckey: access key for SBALs
+ * @dkey: access key for SLSB
+ */
+struct qdesfmt0 {
+	u64 sliba;
+	u64 sla;
+	u64 slsba;
+	u32	 : 32;
+	u32 akey : 4;
+	u32 bkey : 4;
+	u32 ckey : 4;
+	u32 dkey : 4;
+	u32	 : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct qdr - queue description record (QDR)
+ * @qfmt: queue format
+ * @pfmt: implementation dependent parameter format
+ * @ac: adapter characteristics
+ * @iqdcnt: input queue descriptor count
+ * @oqdcnt: output queue descriptor count
+ * @iqdsz: inpout queue descriptor size
+ * @oqdsz: output queue descriptor size
+ * @qiba: queue information block address
+ * @qkey: queue information block key
+ * @qdf0: queue descriptions
+ */
+struct qdr {
+	u32 qfmt   : 8;
+	u32 pfmt   : 8;
+	u32	   : 8;
+	u32 ac	   : 8;
+	u32	   : 8;
+	u32 iqdcnt : 8;
+	u32	   : 8;
+	u32 oqdcnt : 8;
+	u32	   : 8;
+	u32 iqdsz  : 8;
+	u32	   : 8;
+	u32 oqdsz  : 8;
+	/* private: */
+	u32 res[9];
+	/* public: */
+	u64 qiba;
+	u32	   : 32;
+	u32 qkey   : 4;
+	u32	   : 28;
+	struct qdesfmt0 qdf0[126];
+} __attribute__ ((packed, aligned(4096)));
+
+#define QIB_AC_OUTBOUND_PCI_SUPPORTED	0x40
+#define QIB_RFLAGS_ENABLE_QEBSM		0x80
+
+/**
+ * struct qib - queue information block (QIB)
+ * @qfmt: queue format
+ * @pfmt: implementation dependent parameter format
+ * @rflags: QEBSM
+ * @ac: adapter characteristics
+ * @isliba: absolute address of first input SLIB
+ * @osliba: absolute address of first output SLIB
+ * @ebcnam: adapter identifier in EBCDIC
+ * @parm: implementation dependent parameters
+ */
+struct qib {
+	u32 qfmt   : 8;
+	u32 pfmt   : 8;
+	u32 rflags : 8;
+	u32 ac	   : 8;
+	u32	   : 32;
+	u64 isliba;
+	u64 osliba;
+	u32	   : 32;
+	u32	   : 32;
+	u8 ebcnam[8];
+	/* private: */
+	u8 res[88];
+	/* public: */
+	u8 parm[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(256)));
+
+/**
+ * struct slibe - storage list information block element (SLIBE)
+ * @parms: implementation dependent parameters
+ */
+struct slibe {
+	u64 parms;
+};
+
+/**
+ * struct slib - storage list information block (SLIB)
+ * @nsliba: next SLIB address (if any)
+ * @sla: SL address
+ * @slsba: SLSB address
+ * @slibe: SLIB elements
+ */
+struct slib {
+	u64 nsliba;
+	u64 sla;
+	u64 slsba;
+	/* private: */
+	u8 res[1000];
+	/* public: */
+	struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(2048)));
+
+/**
+ * struct sbal_flags - storage block address list flags
+ * @last: last entry
+ * @cont: contiguous storage
+ * @frag: fragmentation
+ */
+struct sbal_flags {
+	u8	: 1;
+	u8 last : 1;
+	u8 cont : 1;
+	u8	: 1;
+	u8 frag : 2;
+	u8	: 2;
+} __attribute__ ((packed));
+
+#define SBAL_FLAGS_FIRST_FRAG		0x04000000UL
+#define SBAL_FLAGS_MIDDLE_FRAG		0x08000000UL
+#define SBAL_FLAGS_LAST_FRAG		0x0c000000UL
+#define SBAL_FLAGS_LAST_ENTRY		0x40000000UL
+#define SBAL_FLAGS_CONTIGUOUS		0x20000000UL
+
+#define SBAL_FLAGS0_DATA_CONTINUATION	0x20UL
+
+/* Awesome OpenFCP extensions */
+#define SBAL_FLAGS0_TYPE_STATUS		0x00UL
+#define SBAL_FLAGS0_TYPE_WRITE		0x08UL
+#define SBAL_FLAGS0_TYPE_READ		0x10UL
+#define SBAL_FLAGS0_TYPE_WRITE_READ	0x18UL
+#define SBAL_FLAGS0_MORE_SBALS		0x04UL
+#define SBAL_FLAGS0_COMMAND		0x02UL
+#define SBAL_FLAGS0_LAST_SBAL		0x00UL
+#define SBAL_FLAGS0_ONLY_SBAL		SBAL_FLAGS0_COMMAND
+#define SBAL_FLAGS0_MIDDLE_SBAL		SBAL_FLAGS0_MORE_SBALS
+#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
+#define SBAL_FLAGS0_PCI			0x40
+
+/**
+ * struct sbal_sbalf_0 - sbal flags for sbale 0
+ * @pci: PCI indicator
+ * @cont: data continuation
+ * @sbtype: storage-block type (FCP)
+ */
+struct sbal_sbalf_0 {
+	u8	  : 1;
+	u8 pci	  : 1;
+	u8 cont   : 1;
+	u8 sbtype : 2;
+	u8	  : 3;
+} __attribute__ ((packed));
+
+/**
+ * struct sbal_sbalf_1 - sbal flags for sbale 1
+ * @key: storage key
+ */
+struct sbal_sbalf_1 {
+	u8     : 4;
+	u8 key : 4;
+} __attribute__ ((packed));
+
+/**
+ * struct sbal_sbalf_14 - sbal flags for sbale 14
+ * @erridx: error index
+ */
+struct sbal_sbalf_14 {
+	u8	  : 4;
+	u8 erridx : 4;
+} __attribute__ ((packed));
+
+/**
+ * struct sbal_sbalf_15 - sbal flags for sbale 15
+ * @reason: reason for error state
+ */
+struct sbal_sbalf_15 {
+	u8 reason;
+} __attribute__ ((packed));
+
+/**
+ * union sbal_sbalf - storage block address list flags
+ * @i0: sbalf0
+ * @i1: sbalf1
+ * @i14: sbalf14
+ * @i15: sblaf15
+ * @value: raw value
+ */
+union sbal_sbalf {
+	struct sbal_sbalf_0  i0;
+	struct sbal_sbalf_1  i1;
+	struct sbal_sbalf_14 i14;
+	struct sbal_sbalf_15 i15;
+	u8 value;
+};
+
+/**
+ * struct qdio_buffer_element - SBAL entry
+ * @flags: flags
+ * @length: length
+ * @addr: address
+*/
+struct qdio_buffer_element {
+	u32 flags;
+	u32 length;
+#ifdef CONFIG_32BIT
+	/* private: */
+	void *reserved;
+	/* public: */
+#endif
+	void *addr;
+} __attribute__ ((packed, aligned(16)));
+
+/**
+ * struct qdio_buffer - storage block address list (SBAL)
+ * @element: SBAL entries
+ */
+struct qdio_buffer {
+	struct qdio_buffer_element element[QDIO_MAX_ELEMENTS_PER_BUFFER];
+} __attribute__ ((packed, aligned(256)));
+
+/**
+ * struct sl_element - storage list entry
+ * @sbal: absolute SBAL address
+ */
+struct sl_element {
+#ifdef CONFIG_32BIT
+	/* private: */
+	unsigned long reserved;
+	/* public: */
+#endif
+	unsigned long sbal;
+} __attribute__ ((packed));
+
+/**
+ * struct sl - storage list (SL)
+ * @element: SL entries
+ */
+struct sl {
+	struct sl_element element[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(1024)));
+
+/**
+ * struct slsb - storage list state block (SLSB)
+ * @val: state per buffer
+ */
+struct slsb {
+	u8 val[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(256)));
+
+struct qdio_ssqd_desc {
+	u8 flags;
+	u8:8;
+	u16 sch;
+	u8 qfmt;
+	u8 parm;
+	u8 qdioac1;
+	u8 sch_class;
+	u8 pcnt;
+	u8 icnt;
+	u8:8;
+	u8 ocnt;
+	u8:8;
+	u8 mbccnt;
+	u16 qdioac2;
+	u64 sch_token;
+	u64:64;
+} __attribute__ ((packed));
+
+/* params are: ccw_device, qdio_error, queue_number,
+   first element processed, number of elements processed, int_parm */
+typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
+			    int, int, unsigned long);
+
+/* qdio errors reported to the upper-layer program */
+#define QDIO_ERROR_SIGA_ACCESS_EXCEPTION	0x10
+#define QDIO_ERROR_SIGA_BUSY			0x20
+#define QDIO_ERROR_ACTIVATE_CHECK_CONDITION	0x40
+#define QDIO_ERROR_SLSB_STATE			0x80
+
+/* for qdio_initialize */
+#define QDIO_INBOUND_0COPY_SBALS		0x01
+#define QDIO_OUTBOUND_0COPY_SBALS		0x02
+#define QDIO_USE_OUTBOUND_PCIS			0x04
+
+/* for qdio_cleanup */
+#define QDIO_FLAG_CLEANUP_USING_CLEAR		0x01
+#define QDIO_FLAG_CLEANUP_USING_HALT		0x02
+
+/**
+ * struct qdio_initialize - qdio initalization data
+ * @cdev: associated ccw device
+ * @q_format: queue format
+ * @adapter_name: name for the adapter
+ * @qib_param_field_format: format for qib_parm_field
+ * @qib_param_field: pointer to 128 bytes or NULL, if no param field
+ * @input_slib_elements: pointer to no_input_qs * 128 words of data or NULL
+ * @output_slib_elements: pointer to no_output_qs * 128 words of data or NULL
+ * @no_input_qs: number of input queues
+ * @no_output_qs: number of output queues
+ * @input_handler: handler to be called for input queues
+ * @output_handler: handler to be called for output queues
+ * @int_parm: interruption parameter
+ * @flags: initialization flags
+ * @input_sbal_addr_array:  address of no_input_qs * 128 pointers
+ * @output_sbal_addr_array: address of no_output_qs * 128 pointers
+ */
+struct qdio_initialize {
+	struct ccw_device *cdev;
+	unsigned char q_format;
+	unsigned char adapter_name[8];
+	unsigned int qib_param_field_format;
+	unsigned char *qib_param_field;
+	unsigned long *input_slib_elements;
+	unsigned long *output_slib_elements;
+	unsigned int no_input_qs;
+	unsigned int no_output_qs;
+	qdio_handler_t *input_handler;
+	qdio_handler_t *output_handler;
+	unsigned long int_parm;
+	unsigned long flags;
+	void **input_sbal_addr_array;
+	void **output_sbal_addr_array;
+};
+
+#define QDIO_STATE_INACTIVE		0x00000002 /* after qdio_cleanup */
+#define QDIO_STATE_ESTABLISHED		0x00000004 /* after qdio_establish */
+#define QDIO_STATE_ACTIVE		0x00000008 /* after qdio_activate */
+#define QDIO_STATE_STOPPED		0x00000010 /* after queues went down */
+
+#define QDIO_FLAG_SYNC_INPUT		0x01
+#define QDIO_FLAG_SYNC_OUTPUT		0x02
+#define QDIO_FLAG_PCI_OUT		0x10
+
+extern int qdio_initialize(struct qdio_initialize *init_data);
+extern int qdio_allocate(struct qdio_initialize *init_data);
+extern int qdio_establish(struct qdio_initialize *init_data);
+extern int qdio_activate(struct ccw_device *);
+
+extern int do_QDIO(struct ccw_device*, unsigned int flags,
+		   int q_nr, int qidx, int count);
+extern int qdio_cleanup(struct ccw_device*, int how);
+extern int qdio_shutdown(struct ccw_device*, int how);
+extern int qdio_free(struct ccw_device *);
+extern struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev);
+
+#endif /* __QDIO_H__ */
diff --git a/arch/s390/include/asm/qeth.h b/arch/s390/include/asm/qeth.h
new file mode 100644
index 00000000000..930d378ef75
--- /dev/null
+++ b/arch/s390/include/asm/qeth.h
@@ -0,0 +1,78 @@
+/*
+ * include/asm-s390/qeth.h
+ *
+ * ioctl definitions for qeth driver
+ *
+ * Copyright (C) 2004 IBM Corporation
+ *
+ * Author(s):	Thomas Spatzier <tspat@de.ibm.com>
+ *
+ */
+#ifndef __ASM_S390_QETH_IOCTL_H__
+#define __ASM_S390_QETH_IOCTL_H__
+#include <linux/ioctl.h>
+
+#define SIOC_QETH_ARP_SET_NO_ENTRIES    (SIOCDEVPRIVATE)
+#define SIOC_QETH_ARP_QUERY_INFO        (SIOCDEVPRIVATE + 1)
+#define SIOC_QETH_ARP_ADD_ENTRY         (SIOCDEVPRIVATE + 2)
+#define SIOC_QETH_ARP_REMOVE_ENTRY      (SIOCDEVPRIVATE + 3)
+#define SIOC_QETH_ARP_FLUSH_CACHE       (SIOCDEVPRIVATE + 4)
+#define SIOC_QETH_ADP_SET_SNMP_CONTROL  (SIOCDEVPRIVATE + 5)
+#define SIOC_QETH_GET_CARD_TYPE         (SIOCDEVPRIVATE + 6)
+
+struct qeth_arp_cache_entry {
+	__u8  macaddr[6];
+	__u8  reserved1[2];
+	__u8  ipaddr[16]; /* for both  IPv4 and IPv6 */
+	__u8  reserved2[32];
+} __attribute__ ((packed));
+
+struct qeth_arp_qi_entry7 {
+	__u8 media_specific[32];
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 macaddr[6];
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry7_short {
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 macaddr[6];
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry5 {
+	__u8 media_specific[32];
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry5_short {
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+/*
+ * can be set by user if no "media specific information" is wanted
+ * -> saves a lot of space in user space buffer
+ */
+#define QETH_QARP_STRIP_ENTRIES  0x8000
+#define QETH_QARP_REQUEST_MASK   0x00ff
+
+/* data sent to user space as result of query arp ioctl */
+#define QETH_QARP_USER_DATA_SIZE 20000
+#define QETH_QARP_MASK_OFFSET    4
+#define QETH_QARP_ENTRIES_OFFSET 6
+struct qeth_arp_query_user_data {
+	union {
+		__u32 data_len;		/* set by user space program */
+		__u32 no_entries;	/* set by kernel */
+	} u;
+	__u16 mask_bits;
+	char *entries;
+} __attribute__((packed));
+
+#endif /* __ASM_S390_QETH_IOCTL_H__ */
diff --git a/arch/s390/include/asm/reset.h b/arch/s390/include/asm/reset.h
new file mode 100644
index 00000000000..f584f4a5258
--- /dev/null
+++ b/arch/s390/include/asm/reset.h
@@ -0,0 +1,21 @@
+/*
+ *  include/asm-s390/reset.h
+ *
+ *    Copyright IBM Corp. 2006
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_RESET_H
+#define _ASM_S390_RESET_H
+
+#include <linux/list.h>
+
+struct reset_call {
+	struct list_head list;
+	void (*fn)(void);
+};
+
+extern void register_reset_call(struct reset_call *reset);
+extern void unregister_reset_call(struct reset_call *reset);
+extern void s390_reset_system(void);
+#endif /* _ASM_S390_RESET_H */
diff --git a/arch/s390/include/asm/resource.h b/arch/s390/include/asm/resource.h
new file mode 100644
index 00000000000..366c01de04f
--- /dev/null
+++ b/arch/s390/include/asm/resource.h
@@ -0,0 +1,15 @@
+/*
+ *  include/asm-s390/resource.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/resources.h"
+ */
+
+#ifndef _S390_RESOURCE_H
+#define _S390_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
+
diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h
new file mode 100644
index 00000000000..9d2a1797180
--- /dev/null
+++ b/arch/s390/include/asm/rwsem.h
@@ -0,0 +1,387 @@
+#ifndef _S390_RWSEM_H
+#define _S390_RWSEM_H
+
+/*
+ *  include/asm-s390/rwsem.h
+ *
+ *  S390 version
+ *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Based on asm-alpha/semaphore.h and asm-i386/rwsem.h
+ */
+
+/*
+ *
+ * The MSW of the count is the negated number of active writers and waiting
+ * lockers, and the LSW is the total number of active locks
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
+ * uncontended lock. This can be determined because XADD returns the old value.
+ * Readers increment by 1 and see a positive value when uncontended, negative
+ * if there are writers (and maybe) readers waiting (in which case it goes to
+ * sleep).
+ *
+ * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
+ * be extended to 65534 by manually checking the whole MSW rather than relying
+ * on the S flag.
+ *
+ * The value of ACTIVE_BIAS supports up to 65535 active processes.
+ *
+ * This should be totally fair - if anything is waiting, a process that wants a
+ * lock will go to the back of the queue. When the currently active lock is
+ * released, if there's a writer at the front of the queue, then that and only
+ * that will be woken up; if there's a bunch of consequtive readers at the
+ * front, then they'll all be woken up, but no other readers will be.
+ */
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct rwsem_waiter;
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *);
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed long		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifndef __s390x__
+#define RWSEM_UNLOCKED_VALUE	0x00000000
+#define RWSEM_ACTIVE_BIAS	0x00000001
+#define RWSEM_ACTIVE_MASK	0x0000ffff
+#define RWSEM_WAITING_BIAS	(-0x00010000)
+#else /* __s390x__ */
+#define RWSEM_UNLOCKED_VALUE	0x0000000000000000L
+#define RWSEM_ACTIVE_BIAS	0x0000000000000001L
+#define RWSEM_ACTIVE_MASK	0x00000000ffffffffL
+#define RWSEM_WAITING_BIAS	(-0x0000000100000000L)
+#endif /* __s390x__ */
+#define RWSEM_ACTIVE_READ_BIAS	RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS	(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * initialisation
+ */
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+ { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait.lock), \
+   LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)				\
+do {						\
+	static struct lock_class_key __key;	\
+						\
+	__init_rwsem((sem), #sem, &__key);	\
+} while (0)
+
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	ahi	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	aghi	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory");
+	if (old < 0)
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	ltr	%1,%0\n"
+		"	jm	1f\n"
+		"	ahi	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b\n"
+		"1:"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	ltgr	%1,%0\n"
+		"	jm	1f\n"
+		"	aghi	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b\n"
+		"1:"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory");
+	return old >= 0 ? 1 : 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	signed long old, new, tmp;
+
+	tmp = RWSEM_ACTIVE_WRITE_BIAS;
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	a	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	ag	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory");
+	if (old != 0)
+		rwsem_down_write_failed(sem);
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	signed long old;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%2)\n"
+		"0:	ltr	%0,%0\n"
+		"	jnz	1f\n"
+		"	cs	%0,%4,0(%2)\n"
+		"	jl	0b\n"
+#else /* __s390x__ */
+		"	lg	%0,0(%2)\n"
+		"0:	ltgr	%0,%0\n"
+		"	jnz	1f\n"
+		"	csg	%0,%4,0(%2)\n"
+		"	jl	0b\n"
+#endif /* __s390x__ */
+		"1:"
+		: "=&d" (old), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory");
+	return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	ahi	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	aghi	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (-RWSEM_ACTIVE_READ_BIAS)
+		: "cc", "memory");
+	if (new < 0)
+		if ((new & RWSEM_ACTIVE_MASK) == 0)
+			rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	signed long old, new, tmp;
+
+	tmp = -RWSEM_ACTIVE_WRITE_BIAS;
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	a	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	ag	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory");
+	if (new < 0)
+		if ((new & RWSEM_ACTIVE_MASK) == 0)
+			rwsem_wake(sem);
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	signed long old, new, tmp;
+
+	tmp = -RWSEM_WAITING_BIAS;
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	a	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	ag	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory");
+	if (new > 1)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	ar	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	agr	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "d" (delta)
+		: "cc", "memory");
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	ar	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	agr	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "d" (delta)
+		: "cc", "memory");
+	return new;
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _S390_RWSEM_H */
diff --git a/arch/s390/include/asm/s390_ext.h b/arch/s390/include/asm/s390_ext.h
new file mode 100644
index 00000000000..2afc060266a
--- /dev/null
+++ b/arch/s390/include/asm/s390_ext.h
@@ -0,0 +1,32 @@
+#ifndef _S390_EXTINT_H
+#define _S390_EXTINT_H
+
+/*
+ *  include/asm-s390/s390_ext.h
+ *
+ *  S390 version
+ *    Copyright IBM Corp. 1999,2007
+ *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#include <linux/types.h>
+
+typedef void (*ext_int_handler_t)(__u16 code);
+
+typedef struct ext_int_info_t {
+	struct ext_int_info_t *next;
+	ext_int_handler_t handler;
+	__u16 code;
+} ext_int_info_t;
+
+extern ext_int_info_t *ext_int_hash[];
+
+int register_external_interrupt(__u16 code, ext_int_handler_t handler);
+int register_early_external_interrupt(__u16 code, ext_int_handler_t handler,
+				      ext_int_info_t *info);
+int unregister_external_interrupt(__u16 code, ext_int_handler_t handler);
+int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler,
+					ext_int_info_t *info);
+
+#endif
diff --git a/arch/s390/include/asm/s390_rdev.h b/arch/s390/include/asm/s390_rdev.h
new file mode 100644
index 00000000000..6fa20442a48
--- /dev/null
+++ b/arch/s390/include/asm/s390_rdev.h
@@ -0,0 +1,15 @@
+/*
+ *  include/asm-s390/ccwdev.h
+ *
+ *    Copyright (C) 2002,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
+ *               Carsten Otte  <cotte@de.ibm.com>
+ *
+ *  Interface for s390 root device
+ */
+
+#ifndef _S390_RDEV_H_
+#define _S390_RDEV_H_
+extern struct device *s390_root_dev_register(const char *);
+extern void s390_root_dev_unregister(struct device *);
+#endif /* _S390_RDEV_H_ */
diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h
new file mode 100644
index 00000000000..29ec8e28c8d
--- /dev/null
+++ b/arch/s390/include/asm/scatterlist.h
@@ -0,0 +1,19 @@
+#ifndef _ASMS390_SCATTERLIST_H
+#define _ASMS390_SCATTERLIST_H
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+    unsigned long sg_magic;
+#endif
+    unsigned long page_link;
+    unsigned int offset;
+    unsigned int length;
+};
+
+#ifdef __s390x__
+#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL)
+#else
+#define ISA_DMA_THRESHOLD (0xffffffffUL)
+#endif
+
+#endif /* _ASMS390X_SCATTERLIST_H */
diff --git a/arch/s390/include/asm/schid.h b/arch/s390/include/asm/schid.h
new file mode 100644
index 00000000000..825503cf3dc
--- /dev/null
+++ b/arch/s390/include/asm/schid.h
@@ -0,0 +1,32 @@
+#ifndef ASM_SCHID_H
+#define ASM_SCHID_H
+
+struct subchannel_id {
+	__u32 cssid : 8;
+	__u32 : 4;
+	__u32 m : 1;
+	__u32 ssid : 2;
+	__u32 one : 1;
+	__u32 sch_no : 16;
+} __attribute__ ((packed, aligned(4)));
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+
+/* Helper function for sane state of pre-allocated subchannel_id. */
+static inline void
+init_subchannel_id(struct subchannel_id *schid)
+{
+	memset(schid, 0, sizeof(struct subchannel_id));
+	schid->one = 1;
+}
+
+static inline int
+schid_equal(struct subchannel_id *schid1, struct subchannel_id *schid2)
+{
+	return !memcmp(schid1, schid2, sizeof(struct subchannel_id));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* ASM_SCHID_H */
diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h
new file mode 100644
index 00000000000..fed7bee650a
--- /dev/null
+++ b/arch/s390/include/asm/sclp.h
@@ -0,0 +1,58 @@
+/*
+ *  include/asm-s390/sclp.h
+ *
+ *    Copyright IBM Corp. 2007
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_SCLP_H
+#define _ASM_S390_SCLP_H
+
+#include <linux/types.h>
+#include <asm/chpid.h>
+
+#define SCLP_CHP_INFO_MASK_SIZE		32
+
+struct sclp_chp_info {
+	u8 recognized[SCLP_CHP_INFO_MASK_SIZE];
+	u8 standby[SCLP_CHP_INFO_MASK_SIZE];
+	u8 configured[SCLP_CHP_INFO_MASK_SIZE];
+};
+
+#define LOADPARM_LEN 8
+
+struct sclp_ipl_info {
+	int is_valid;
+	int has_dump;
+	char loadparm[LOADPARM_LEN];
+};
+
+struct sclp_cpu_entry {
+	u8 address;
+	u8 reserved0[13];
+	u8 type;
+	u8 reserved1;
+} __attribute__((packed));
+
+struct sclp_cpu_info {
+	unsigned int configured;
+	unsigned int standby;
+	unsigned int combined;
+	int has_cpu_type;
+	struct sclp_cpu_entry cpu[255];
+};
+
+int sclp_get_cpu_info(struct sclp_cpu_info *info);
+int sclp_cpu_configure(u8 cpu);
+int sclp_cpu_deconfigure(u8 cpu);
+void sclp_facilities_detect(void);
+unsigned long long sclp_get_rnmax(void);
+unsigned long long sclp_get_rzm(void);
+int sclp_sdias_blk_count(void);
+int sclp_sdias_copy(void *dest, int blk_num, int nr_blks);
+int sclp_chp_configure(struct chp_id chpid);
+int sclp_chp_deconfigure(struct chp_id chpid);
+int sclp_chp_read_info(struct sclp_chp_info *info);
+void sclp_get_ipl_info(struct sclp_ipl_info *info);
+
+#endif /* _ASM_S390_SCLP_H */
diff --git a/arch/s390/include/asm/sections.h b/arch/s390/include/asm/sections.h
new file mode 100644
index 00000000000..fbd9116eb17
--- /dev/null
+++ b/arch/s390/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef _S390_SECTIONS_H
+#define _S390_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char _eshared[], _ehead[];
+
+#endif
diff --git a/arch/s390/include/asm/segment.h b/arch/s390/include/asm/segment.h
new file mode 100644
index 00000000000..8bfce3475b1
--- /dev/null
+++ b/arch/s390/include/asm/segment.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+#endif
diff --git a/arch/s390/include/asm/sembuf.h b/arch/s390/include/asm/sembuf.h
new file mode 100644
index 00000000000..32626b0cac4
--- /dev/null
+++ b/arch/s390/include/asm/sembuf.h
@@ -0,0 +1,29 @@
+#ifndef _S390_SEMBUF_H
+#define _S390_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem (for !__s390x__)
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+#ifndef __s390x__
+	unsigned long	__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t	sem_ctime;		/* last change time */
+#ifndef __s390x__
+	unsigned long	__unused2;
+#endif /* ! __s390x__ */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _S390_SEMBUF_H */
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
new file mode 100644
index 00000000000..2bd9faeb391
--- /dev/null
+++ b/arch/s390/include/asm/setup.h
@@ -0,0 +1,140 @@
+/*
+ *  include/asm-s390/setup.h
+ *
+ *  S390 version
+ *    Copyright IBM Corp. 1999,2006
+ */
+
+#ifndef _ASM_S390_SETUP_H
+#define _ASM_S390_SETUP_H
+
+#define COMMAND_LINE_SIZE	1024
+
+#define ARCH_COMMAND_LINE_SIZE	896
+
+#ifdef __KERNEL__
+
+#include <asm/types.h>
+
+#define PARMAREA		0x10400
+#define MEMORY_CHUNKS		256
+
+#ifndef __ASSEMBLY__
+
+#ifndef __s390x__
+#define IPL_DEVICE        (*(unsigned long *)  (0x10404))
+#define INITRD_START      (*(unsigned long *)  (0x1040C))
+#define INITRD_SIZE       (*(unsigned long *)  (0x10414))
+#else /* __s390x__ */
+#define IPL_DEVICE        (*(unsigned long *)  (0x10400))
+#define INITRD_START      (*(unsigned long *)  (0x10408))
+#define INITRD_SIZE       (*(unsigned long *)  (0x10410))
+#endif /* __s390x__ */
+#define COMMAND_LINE      ((char *)            (0x10480))
+
+#define CHUNK_READ_WRITE 0
+#define CHUNK_READ_ONLY  1
+
+struct mem_chunk {
+	unsigned long addr;
+	unsigned long size;
+	int type;
+};
+
+extern struct mem_chunk memory_chunk[];
+extern unsigned long real_memory_size;
+
+void detect_memory_layout(struct mem_chunk chunk[]);
+
+#ifdef CONFIG_S390_SWITCH_AMODE
+extern unsigned int switch_amode;
+#else
+#define switch_amode	(0)
+#endif
+
+#ifdef CONFIG_S390_EXEC_PROTECT
+extern unsigned int s390_noexec;
+#else
+#define s390_noexec	(0)
+#endif
+
+/*
+ * Machine features detected in head.S
+ */
+extern unsigned long machine_flags;
+
+#define MACHINE_FLAG_VM		(1UL << 0)
+#define MACHINE_FLAG_IEEE	(1UL << 1)
+#define MACHINE_FLAG_CSP	(1UL << 3)
+#define MACHINE_FLAG_MVPG	(1UL << 4)
+#define MACHINE_FLAG_DIAG44	(1UL << 5)
+#define MACHINE_FLAG_IDTE	(1UL << 6)
+#define MACHINE_FLAG_DIAG9C	(1UL << 7)
+#define MACHINE_FLAG_MVCOS	(1UL << 8)
+#define MACHINE_FLAG_KVM	(1UL << 9)
+#define MACHINE_FLAG_HPAGE	(1UL << 10)
+#define MACHINE_FLAG_PFMF	(1UL << 11)
+
+#define MACHINE_IS_VM		(machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM		(machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C	(machine_flags & MACHINE_FLAG_DIAG9C)
+
+#ifndef __s390x__
+#define MACHINE_HAS_IEEE	(machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP		(machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IDTE	(0)
+#define MACHINE_HAS_DIAG44	(1)
+#define MACHINE_HAS_MVPG	(machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVCOS	(0)
+#define MACHINE_HAS_HPAGE	(0)
+#define MACHINE_HAS_PFMF	(0)
+#else /* __s390x__ */
+#define MACHINE_HAS_IEEE	(1)
+#define MACHINE_HAS_CSP		(1)
+#define MACHINE_HAS_IDTE	(machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44	(machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_MVPG	(1)
+#define MACHINE_HAS_MVCOS	(machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE	(machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
+#endif /* __s390x__ */
+
+#define ZFCPDUMP_HSA_SIZE	(32UL<<20)
+
+/*
+ * Console mode. Override with conmode=
+ */
+extern unsigned int console_mode;
+extern unsigned int console_devno;
+extern unsigned int console_irq;
+
+extern char vmhalt_cmd[];
+extern char vmpoff_cmd[];
+
+#define CONSOLE_IS_UNDEFINED	(console_mode == 0)
+#define CONSOLE_IS_SCLP		(console_mode == 1)
+#define CONSOLE_IS_3215		(console_mode == 2)
+#define CONSOLE_IS_3270		(console_mode == 3)
+#define SET_CONSOLE_SCLP	do { console_mode = 1; } while (0)
+#define SET_CONSOLE_3215	do { console_mode = 2; } while (0)
+#define SET_CONSOLE_3270	do { console_mode = 3; } while (0)
+
+#define NSS_NAME_SIZE	8
+extern char kernel_nss_name[];
+
+#else /* __ASSEMBLY__ */
+
+#ifndef __s390x__
+#define IPL_DEVICE        0x10404
+#define INITRD_START      0x1040C
+#define INITRD_SIZE       0x10414
+#else /* __s390x__ */
+#define IPL_DEVICE        0x10400
+#define INITRD_START      0x10408
+#define INITRD_SIZE       0x10410
+#endif /* __s390x__ */
+#define COMMAND_LINE      0x10480
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_SETUP_H */
diff --git a/arch/s390/include/asm/sfp-machine.h b/arch/s390/include/asm/sfp-machine.h
new file mode 100644
index 00000000000..4e16aede4b0
--- /dev/null
+++ b/arch/s390/include/asm/sfp-machine.h
@@ -0,0 +1,142 @@
+/* Machine-dependent software floating-point definitions.
+   S/390 kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+   
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned int
+#define _FP_WS_TYPE		signed int
+#define _FP_I_TYPE		int
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
+  do {                                                          \
+    if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)          \
+        && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs))     \
+      {                                                         \
+        R##_s = Y##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,Y);                                \
+      }                                                         \
+    else                                                        \
+      {                                                         \
+        R##_s = X##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,X);                                \
+      }                                                         \
+    R##_c = FP_CLS_NAN;                                         \
+  } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({		\
+	unsigned int __r2 = (x2) + (y2);			\
+	unsigned int __r1 = (x1);				\
+	unsigned int __r0 = (x0);				\
+	asm volatile(						\
+		"	alr	%2,%3\n"			\
+		"	brc	12,0f\n"			\
+		"	lhi	0,1\n"				\
+		"	alr	%1,0\n"				\
+		"	brc	12,0f\n"			\
+		"	alr	%0,0\n"				\
+		"0:"						\
+		: "+&d" (__r2), "+&d" (__r1), "+&d" (__r0)	\
+		: "d" (y0), "i" (1) : "cc", "0" );		\
+	asm volatile(						\
+		"	alr	%1,%2\n"			\
+		"	brc	12,0f\n"			\
+		"	ahi	%0,1\n"				\
+		"0:"						\
+		: "+&d" (__r2), "+&d" (__r1)			\
+		: "d" (y1) : "cc");				\
+	(r2) = __r2;						\
+	(r1) = __r1;						\
+	(r0) = __r0;						\
+})
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({		\
+	unsigned int __r2 = (x2) - (y2);			\
+	unsigned int __r1 = (x1);				\
+	unsigned int __r0 = (x0);				\
+	asm volatile(						\
+		"	slr   %2,%3\n"				\
+		"	brc	3,0f\n"				\
+		"	lhi	0,1\n"				\
+		"	slr	%1,0\n"				\
+		"	brc	3,0f\n"				\
+		"	slr	%0,0\n"				\
+		"0:"						\
+		: "+&d" (__r2), "+&d" (__r1), "+&d" (__r0)	\
+		: "d" (y0) : "cc", "0");			\
+	asm volatile(						\
+		"	slr	%1,%2\n"			\
+		"	brc	3,0f\n"				\
+		"	ahi	%0,-1\n"			\
+		"0:"						\
+		: "+&d" (__r2), "+&d" (__r1)			\
+		: "d" (y1) : "cc");				\
+	(r2) = __r2;						\
+	(r1) = __r1;						\
+	(r0) = __r0;						\
+})
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+/* Obtain the current rounding mode. */
+#define FP_ROUNDMODE	mode
+
+/* Exception flags. */
+#define FP_EX_INVALID		0x800000
+#define FP_EX_DIVZERO		0x400000
+#define FP_EX_OVERFLOW		0x200000
+#define FP_EX_UNDERFLOW		0x100000
+#define FP_EX_INEXACT		0x080000
+
+/* We write the results always */
+#define FP_INHIBIT_RESULTS 0
+
+#endif
diff --git a/arch/s390/include/asm/sfp-util.h b/arch/s390/include/asm/sfp-util.h
new file mode 100644
index 00000000000..0addc6466d9
--- /dev/null
+++ b/arch/s390/include/asm/sfp-util.h
@@ -0,0 +1,77 @@
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({		\
+	unsigned int __sh = (ah);			\
+	unsigned int __sl = (al);			\
+	asm volatile(					\
+		"	alr	%1,%3\n"		\
+		"	brc	12,0f\n"		\
+		"	ahi	%0,1\n"			\
+		"0:	alr  %0,%2"			\
+		: "+&d" (__sh), "+d" (__sl)		\
+		: "d" (bh), "d" (bl) : "cc");		\
+	(sh) = __sh;					\
+	(sl) = __sl;					\
+})
+
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({		\
+	unsigned int __sh = (ah);			\
+	unsigned int __sl = (al);			\
+	asm volatile(					\
+		"	slr	%1,%3\n"		\
+		"	brc	3,0f\n"			\
+		"	ahi	%0,-1\n"		\
+		"0:	slr	%0,%2"			\
+		: "+&d" (__sh), "+d" (__sl)		\
+		: "d" (bh), "d" (bl) : "cc");		\
+	(sh) = __sh;					\
+	(sl) = __sl;					\
+})
+
+/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */
+#define umul_ppmm(wh, wl, u, v) ({			\
+	unsigned int __wh = u;				\
+	unsigned int __wl = v;				\
+	asm volatile(					\
+		"	ltr	1,%0\n"			\
+		"	mr	0,%1\n"			\
+		"	jnm	0f\n"				\
+		"	alr	0,%1\n"			\
+		"0:	ltr	%1,%1\n"			\
+		"	jnm	1f\n"				\
+		"	alr	0,%0\n"			\
+		"1:	lr	%0,0\n"			\
+		"	lr	%1,1\n"			\
+		: "+d" (__wh), "+d" (__wl)		\
+		: : "0", "1", "cc");			\
+	wh = __wh;					\
+	wl = __wl;					\
+})
+
+#ifdef __s390x__
+#define udiv_qrnnd(q, r, n1, n0, d)			\
+  do { unsigned long __n;				\
+       unsigned int __r, __d;				\
+    __n = ((unsigned long)(n1) << 32) + n0;		\
+    __d = (d);						\
+    (q) = __n / __d;					\
+    (r) = __n % __d;					\
+  } while (0)
+#else
+#define udiv_qrnnd(q, r, n1, n0, d)			\
+  do { unsigned int __r;				\
+    (q) = __udiv_qrnnd (&__r, (n1), (n0), (d));		\
+    (r) = __r;						\
+  } while (0)
+extern unsigned long __udiv_qrnnd (unsigned int *, unsigned int,
+				   unsigned int , unsigned int);
+#endif
+
+#define UDIV_NEEDS_NORMALIZATION 0
+
+#define abort() return 0
+
+#define __BYTE_ORDER __BIG_ENDIAN
diff --git a/arch/s390/include/asm/shmbuf.h b/arch/s390/include/asm/shmbuf.h
new file mode 100644
index 00000000000..eed2e280ce3
--- /dev/null
+++ b/arch/s390/include/asm/shmbuf.h
@@ -0,0 +1,48 @@
+#ifndef _S390_SHMBUF_H
+#define _S390_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem (for !__s390x__)
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifndef __s390x__
+	unsigned long		__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifndef __s390x__
+	unsigned long		__unused2;
+#endif /* ! __s390x__ */
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifndef __s390x__
+	unsigned long		__unused3;
+#endif /* ! __s390x__ */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _S390_SHMBUF_H */
diff --git a/arch/s390/include/asm/shmparam.h b/arch/s390/include/asm/shmparam.h
new file mode 100644
index 00000000000..c2e0c0508e7
--- /dev/null
+++ b/arch/s390/include/asm/shmparam.h
@@ -0,0 +1,13 @@
+/*
+ *  include/asm-s390/shmparam.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/shmparam.h"
+ */
+#ifndef _ASM_S390_SHMPARAM_H
+#define _ASM_S390_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
+
+#endif /* _ASM_S390_SHMPARAM_H */
diff --git a/arch/s390/include/asm/sigcontext.h b/arch/s390/include/asm/sigcontext.h
new file mode 100644
index 00000000000..aeb6e0b1332
--- /dev/null
+++ b/arch/s390/include/asm/sigcontext.h
@@ -0,0 +1,71 @@
+/*
+ *  include/asm-s390/sigcontext.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#ifndef _ASM_S390_SIGCONTEXT_H
+#define _ASM_S390_SIGCONTEXT_H
+
+#include <linux/compiler.h>
+
+#define __NUM_GPRS 16
+#define __NUM_FPRS 16
+#define __NUM_ACRS 16
+
+#ifndef __s390x__
+
+/* Has to be at least _NSIG_WORDS from asm/signal.h */
+#define _SIGCONTEXT_NSIG	64
+#define _SIGCONTEXT_NSIG_BPW	32
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	96
+
+#else /* __s390x__ */
+
+/* Has to be at least _NSIG_WORDS from asm/signal.h */
+#define _SIGCONTEXT_NSIG	64
+#define _SIGCONTEXT_NSIG_BPW	64 
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	160
+
+#endif /* __s390x__ */
+
+#define _SIGCONTEXT_NSIG_WORDS	(_SIGCONTEXT_NSIG / _SIGCONTEXT_NSIG_BPW)
+#define _SIGMASK_COPY_SIZE	(sizeof(unsigned long)*_SIGCONTEXT_NSIG_WORDS)
+
+typedef struct 
+{
+        unsigned long mask;
+        unsigned long addr;
+} __attribute__ ((aligned(8))) _psw_t;
+
+typedef struct
+{
+	_psw_t psw;
+	unsigned long gprs[__NUM_GPRS];
+	unsigned int  acrs[__NUM_ACRS];
+} _s390_regs_common;
+
+typedef struct
+{
+	unsigned int fpc;
+	double   fprs[__NUM_FPRS];
+} _s390_fp_regs;
+
+typedef struct
+{
+	_s390_regs_common regs;
+	_s390_fp_regs     fpregs;
+} _sigregs;
+
+struct sigcontext
+{
+	unsigned long	oldmask[_SIGCONTEXT_NSIG_WORDS];
+	_sigregs        __user *sregs;
+};
+
+
+#endif
+
diff --git a/arch/s390/include/asm/siginfo.h b/arch/s390/include/asm/siginfo.h
new file mode 100644
index 00000000000..e0ff1ab054b
--- /dev/null
+++ b/arch/s390/include/asm/siginfo.h
@@ -0,0 +1,18 @@
+/*
+ *  include/asm-s390/siginfo.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/siginfo.h"
+ */
+
+#ifndef _S390_SIGINFO_H
+#define _S390_SIGINFO_H
+
+#ifdef __s390x__
+#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#endif
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/s390/include/asm/signal.h b/arch/s390/include/asm/signal.h
new file mode 100644
index 00000000000..f6cfddb278c
--- /dev/null
+++ b/arch/s390/include/asm/signal.h
@@ -0,0 +1,172 @@
+/*
+ *  include/asm-s390/signal.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/signal.h"
+ */
+
+#ifndef _ASMS390_SIGNAL_H
+#define _ASMS390_SIGNAL_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+struct pt_regs;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+#include <asm/sigcontext.h>
+#define _NSIG           _SIGCONTEXT_NSIG
+#define _NSIG_BPW       _SIGCONTEXT_NSIG_BPW
+#define _NSIG_WORDS     _SIGCONTEXT_NSIG_WORDS
+
+typedef unsigned long old_sigset_t;             /* at least 32 bits */
+
+typedef struct {
+        unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG            32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+#define SIGBUS           7
+#define SIGFPE           8
+#define SIGKILL          9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS		31
+#define SIGUNUSED       31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001
+#define SA_NOCLDWAIT    0x00000002
+#define SA_SIGINFO      0x00000004
+#define SA_ONSTACK      0x08000000
+#define SA_RESTART      0x10000000
+#define SA_NODEFER      0x40000000
+#define SA_RESETHAND    0x80000000
+
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+
+#define SA_RESTORER     0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+        sigset_t sa_mask;               /* mask last for extensibility */
+};
+
+struct k_sigaction {
+        struct sigaction sa;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+        union {
+          __sighandler_t _sa_handler;
+          void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+#ifndef __s390x__ /* lovely */
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+#else  /* __s390x__ */
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+	sigset_t sa_mask;
+#endif /* __s390x__ */
+};
+
+#define sa_handler      _u._sa_handler
+#define sa_sigaction    _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+        void __user *ss_sp;
+        int ss_flags;
+        size_t ss_size;
+} stack_t;
+
+
+#endif
diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h
new file mode 100644
index 00000000000..e16d56f8dfe
--- /dev/null
+++ b/arch/s390/include/asm/sigp.h
@@ -0,0 +1,126 @@
+/*
+ *  include/asm-s390/sigp.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *               Heiko Carstens (heiko.carstens@de.ibm.com)
+ *
+ *  sigp.h by D.J. Barrow (c) IBM 1999
+ *  contains routines / structures for signalling other S/390 processors in an
+ *  SMP configuration.
+ */
+
+#ifndef __SIGP__
+#define __SIGP__
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+
+/* get real cpu address from logical cpu number */
+extern volatile int __cpu_logical_map[];
+
+typedef enum
+{
+	sigp_unassigned=0x0,
+	sigp_sense,
+	sigp_external_call,
+	sigp_emergency_signal,
+	sigp_start,
+	sigp_stop,
+	sigp_restart,
+	sigp_unassigned1,
+	sigp_unassigned2,
+	sigp_stop_and_store_status,
+	sigp_unassigned3,
+	sigp_initial_cpu_reset,
+	sigp_cpu_reset,
+	sigp_set_prefix,
+	sigp_store_status_at_address,
+	sigp_store_extended_status_at_address
+} sigp_order_code;
+
+typedef __u32 sigp_status_word;
+
+typedef enum
+{
+        sigp_order_code_accepted=0,
+	sigp_status_stored,
+	sigp_busy,
+	sigp_not_operational
+} sigp_ccode;
+
+
+/*
+ * Definitions for the external call
+ */
+
+/* 'Bit' signals, asynchronous */
+typedef enum
+{
+	ec_schedule=0,
+	ec_call_function,
+	ec_bit_last
+} ec_bit_sig;
+
+/*
+ * Signal processor
+ */
+static inline sigp_ccode
+signal_processor(__u16 cpu_addr, sigp_order_code order_code)
+{
+	register unsigned long reg1 asm ("1") = 0;
+	sigp_ccode ccode;
+
+	asm volatile(
+		"	sigp	%1,%2,0(%3)\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		:	"=d"	(ccode)
+		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+		  "a" (order_code) : "cc" , "memory");
+	return ccode;
+}
+
+/*
+ * Signal processor with parameter
+ */
+static inline sigp_ccode
+signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code)
+{
+	register unsigned int reg1 asm ("1") = parameter;
+	sigp_ccode ccode;
+
+	asm volatile(
+		"	sigp	%1,%2,0(%3)\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (ccode)
+		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+		  "a" (order_code) : "cc" , "memory");
+	return ccode;
+}
+
+/*
+ * Signal processor with parameter and return status
+ */
+static inline sigp_ccode
+signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr,
+		    sigp_order_code order_code)
+{
+	register unsigned int reg1 asm ("1") = parameter;
+	sigp_ccode ccode;
+
+	asm volatile(
+		"	sigp	%1,%2,0(%3)\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (ccode), "+d" (reg1)
+		: "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
+		: "cc" , "memory");
+	*statusptr = reg1;
+	return ccode;
+}
+
+#endif /* __SIGP__ */
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
new file mode 100644
index 00000000000..ae89cf2478f
--- /dev/null
+++ b/arch/s390/include/asm/smp.h
@@ -0,0 +1,116 @@
+/*
+ *  include/asm-s390/smp.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *               Heiko Carstens (heiko.carstens@de.ibm.com)
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+
+#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__)
+
+#include <asm/lowcore.h>
+#include <asm/sigp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+/*
+  s390 specific smp.c headers
+ */
+typedef struct
+{
+	int        intresting;
+	sigp_ccode ccode; 
+	__u32      status;
+	__u16      cpu;
+} sigp_info;
+
+extern void machine_restart_smp(char *);
+extern void machine_halt_smp(void);
+extern void machine_power_off_smp(void);
+
+#define NO_PROC_ID		0xFF		/* No processor magic marker */
+
+/*
+ *	This magic constant controls our willingness to transfer
+ *	a process across CPUs. Such a transfer incurs misses on the L1
+ *	cache, and on a P6 or P5 with multiple L2 caches L2 hits. My
+ *	gut feeling is this will vary by board in value. For a board
+ *	with separate L2 cache it probably depends also on the RSS, and
+ *	for a board with shared L2 cache it ought to decay fast as other
+ *	processes are run.
+ */
+ 
+#define PROC_CHANGE_PENALTY	20		/* Schedule penalty */
+
+#define raw_smp_processor_id()	(S390_lowcore.cpu_data.cpu_nr)
+
+static inline __u16 hard_smp_processor_id(void)
+{
+	return stap();
+}
+
+/*
+ * returns 1 if cpu is in stopped/check stopped state or not operational
+ * returns 0 otherwise
+ */
+static inline int
+smp_cpu_not_running(int cpu)
+{
+	__u32 status;
+
+	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
+	case sigp_order_code_accepted:
+	case sigp_status_stored:
+		/* Check for stopped and check stop state */
+		if (status & 0x50)
+			return 1;
+		break;
+	case sigp_not_operational:
+		return 1;
+	default:
+		break;
+	}
+	return 0;
+}
+
+#define cpu_logical_map(cpu) (cpu)
+
+extern int __cpu_disable (void);
+extern void __cpu_die (unsigned int cpu);
+extern void cpu_die (void) __attribute__ ((noreturn));
+extern int __cpu_up (unsigned int cpu);
+
+extern struct mutex smp_cpu_state_mutex;
+extern int smp_cpu_polarization[];
+
+extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
+	void *info, int wait);
+#endif
+
+#ifndef CONFIG_SMP
+static inline void smp_send_stop(void)
+{
+	/* Disable all interrupts/machine checks */
+	__load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
+}
+
+#define hard_smp_processor_id()		0
+#define smp_cpu_not_running(cpu)	1
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int smp_rescan_cpus(void);
+#else
+static inline int smp_rescan_cpus(void) { return 0; }
+#endif
+
+extern union save_area *zfcpdump_save_areas[NR_CPUS + 1];
+#endif
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
new file mode 100644
index 00000000000..c786ab623b2
--- /dev/null
+++ b/arch/s390/include/asm/socket.h
@@ -0,0 +1,65 @@
+/*
+ *  include/asm-s390/socket.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/socket.h"
+ */
+
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/s390/include/asm/sockios.h b/arch/s390/include/asm/sockios.h
new file mode 100644
index 00000000000..f4fc16c7da5
--- /dev/null
+++ b/arch/s390/include/asm/sockios.h
@@ -0,0 +1,21 @@
+/*
+ *  include/asm-s390/sockios.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/sockios.h"
+ */
+
+#ifndef __ARCH_S390_SOCKIOS__
+#define __ARCH_S390_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif
diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h
new file mode 100644
index 00000000000..545d219e6a2
--- /dev/null
+++ b/arch/s390/include/asm/sparsemem.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_S390_SPARSEMEM_H
+#define _ASM_S390_SPARSEMEM_H
+
+#ifdef CONFIG_64BIT
+
+#define SECTION_SIZE_BITS	28
+#define MAX_PHYSADDR_BITS	42
+#define MAX_PHYSMEM_BITS	42
+
+#else
+
+#define SECTION_SIZE_BITS	25
+#define MAX_PHYSADDR_BITS	31
+#define MAX_PHYSMEM_BITS	31
+
+#endif /* CONFIG_64BIT */
+
+#endif /* _ASM_S390_SPARSEMEM_H */
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
new file mode 100644
index 00000000000..df84ae96915
--- /dev/null
+++ b/arch/s390/include/asm/spinlock.h
@@ -0,0 +1,178 @@
+/*
+ *  include/asm-s390/spinlock.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/spinlock.h"
+ */
+
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <linux/smp.h>
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+static inline int
+_raw_compare_and_swap(volatile unsigned int *lock,
+		      unsigned int old, unsigned int new)
+{
+	asm volatile(
+		"	cs	%0,%3,%1"
+		: "=d" (old), "=Q" (*lock)
+		: "0" (old), "d" (new), "Q" (*lock)
+		: "cc", "memory" );
+	return old;
+}
+
+#else /* __GNUC__ */
+
+static inline int
+_raw_compare_and_swap(volatile unsigned int *lock,
+		      unsigned int old, unsigned int new)
+{
+	asm volatile(
+		"	cs	%0,%3,0(%4)"
+		: "=d" (old), "=m" (*lock)
+		: "0" (old), "d" (new), "a" (lock), "m" (*lock)
+		: "cc", "memory" );
+	return old;
+}
+
+#endif /* __GNUC__ */
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
+#define __raw_spin_is_locked(x) ((x)->owner_cpu != 0)
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) \
+		 _raw_spin_relax(lock); } while (0)
+
+extern void _raw_spin_lock_wait(raw_spinlock_t *);
+extern void _raw_spin_lock_wait_flags(raw_spinlock_t *, unsigned long flags);
+extern int _raw_spin_trylock_retry(raw_spinlock_t *);
+extern void _raw_spin_relax(raw_spinlock_t *lock);
+
+static inline void __raw_spin_lock(raw_spinlock_t *lp)
+{
+	int old;
+
+	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
+	if (likely(old == 0))
+		return;
+	_raw_spin_lock_wait(lp);
+}
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lp,
+					 unsigned long flags)
+{
+	int old;
+
+	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
+	if (likely(old == 0))
+		return;
+	_raw_spin_lock_wait_flags(lp, flags);
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lp)
+{
+	int old;
+
+	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
+	if (likely(old == 0))
+		return 1;
+	return _raw_spin_trylock_retry(lp);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lp)
+{
+	_raw_compare_and_swap(&lp->owner_cpu, lp->owner_cpu, 0);
+}
+		
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(x) ((int)(x)->lock >= 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(x) ((x)->lock == 0)
+
+extern void _raw_read_lock_wait(raw_rwlock_t *lp);
+extern int _raw_read_trylock_retry(raw_rwlock_t *lp);
+extern void _raw_write_lock_wait(raw_rwlock_t *lp);
+extern int _raw_write_trylock_retry(raw_rwlock_t *lp);
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned int old;
+	old = rw->lock & 0x7fffffffU;
+	if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old)
+		_raw_read_lock_wait(rw);
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned int old, cmp;
+
+	old = rw->lock;
+	do {
+		cmp = old;
+		old = _raw_compare_and_swap(&rw->lock, old, old - 1);
+	} while (cmp != old);
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0))
+		_raw_write_lock_wait(rw);
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	_raw_compare_and_swap(&rw->lock, 0x80000000, 0);
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned int old;
+	old = rw->lock & 0x7fffffffU;
+	if (likely(_raw_compare_and_swap(&rw->lock, old, old + 1) == old))
+		return 1;
+	return _raw_read_trylock_retry(rw);
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	if (likely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0))
+		return 1;
+	return _raw_write_trylock_retry(rw);
+}
+
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/s390/include/asm/spinlock_types.h b/arch/s390/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..654abc40de0
--- /dev/null
+++ b/arch/s390/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int owner_cpu;
+} __attribute__ ((aligned (4))) raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/s390/include/asm/stat.h b/arch/s390/include/asm/stat.h
new file mode 100644
index 00000000000..d92959eebb6
--- /dev/null
+++ b/arch/s390/include/asm/stat.h
@@ -0,0 +1,105 @@
+/*
+ *  include/asm-s390/stat.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/stat.h"
+ */
+
+#ifndef _S390_STAT_H
+#define _S390_STAT_H
+
+#ifndef __s390x__
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+struct stat {
+        unsigned short st_dev;
+        unsigned short __pad1;
+        unsigned long  st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned short __pad2;
+        unsigned long  st_size;
+        unsigned long  st_blksize;
+        unsigned long  st_blocks;
+        unsigned long  st_atime;
+        unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+        unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+        unsigned long  st_ctime_nsec;
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+        unsigned long long	st_dev;
+        unsigned int    __pad1;
+#define STAT64_HAS_BROKEN_ST_INO        1
+        unsigned long   __st_ino;
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+        unsigned long   st_uid;
+        unsigned long   st_gid;
+        unsigned long long	st_rdev;
+        unsigned int    __pad3;
+        long long	st_size;
+        unsigned long   st_blksize;
+        unsigned char   __pad4[4];
+        unsigned long   __pad5;     /* future possible st_blocks high bits */
+        unsigned long   st_blocks;  /* Number 512-byte blocks allocated. */
+        unsigned long   st_atime;
+        unsigned long   st_atime_nsec;
+        unsigned long   st_mtime;
+        unsigned long   st_mtime_nsec;
+        unsigned long   st_ctime;
+        unsigned long   st_ctime_nsec;  /* will be high 32 bits of ctime someday */
+        unsigned long long	st_ino;
+};
+
+#else /* __s390x__ */
+
+struct stat {
+        unsigned long  st_dev;
+        unsigned long  st_ino;
+        unsigned long  st_nlink;
+        unsigned int   st_mode;
+        unsigned int   st_uid;
+        unsigned int   st_gid;
+        unsigned int   __pad1;
+        unsigned long  st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+        unsigned long  st_blksize;
+        long           st_blocks;
+        unsigned long  __unused[3];
+};
+
+#endif /* __s390x__ */
+
+#define STAT_HAVE_NSEC 1
+
+#endif
diff --git a/arch/s390/include/asm/statfs.h b/arch/s390/include/asm/statfs.h
new file mode 100644
index 00000000000..099a4557919
--- /dev/null
+++ b/arch/s390/include/asm/statfs.h
@@ -0,0 +1,71 @@
+/*
+ *  include/asm-s390/statfs.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/statfs.h"
+ */
+
+#ifndef _S390_STATFS_H
+#define _S390_STATFS_H
+
+#ifndef __s390x__
+#include <asm-generic/statfs.h>
+#else
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+/*
+ * This is ugly -- we're already 64-bit clean, so just duplicate the 
+ * definitions.
+ */
+struct statfs {
+	int  f_type;
+	int  f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	int  f_namelen;
+	int  f_frsize;
+	int  f_spare[5];
+};
+
+struct statfs64 {
+	int  f_type;
+	int  f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	int  f_namelen;
+	int  f_frsize;
+	int  f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif /* __s390x__ */
+#endif
diff --git a/arch/s390/include/asm/string.h b/arch/s390/include/asm/string.h
new file mode 100644
index 00000000000..d074673a6d9
--- /dev/null
+++ b/arch/s390/include/asm/string.h
@@ -0,0 +1,143 @@
+/*
+ *  include/asm-s390/string.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ */
+
+#ifndef _S390_STRING_H_
+#define _S390_STRING_H_
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_TYPES_H
+#include <linux/types.h>
+#endif
+
+#define __HAVE_ARCH_MEMCHR	/* inline & arch function */
+#define __HAVE_ARCH_MEMCMP	/* arch function */
+#define __HAVE_ARCH_MEMCPY	/* gcc builtin & arch function */
+#define __HAVE_ARCH_MEMSCAN	/* inline & arch function */
+#define __HAVE_ARCH_MEMSET	/* gcc builtin & arch function */
+#define __HAVE_ARCH_STRCAT	/* inline & arch function */
+#define __HAVE_ARCH_STRCMP	/* arch function */
+#define __HAVE_ARCH_STRCPY	/* inline & arch function */
+#define __HAVE_ARCH_STRLCAT	/* arch function */
+#define __HAVE_ARCH_STRLCPY	/* arch function */
+#define __HAVE_ARCH_STRLEN	/* inline & arch function */
+#define __HAVE_ARCH_STRNCAT	/* arch function */
+#define __HAVE_ARCH_STRNCPY	/* arch function */
+#define __HAVE_ARCH_STRNLEN	/* inline & arch function */
+#define __HAVE_ARCH_STRRCHR	/* arch function */
+#define __HAVE_ARCH_STRSTR	/* arch function */
+
+/* Prototypes for non-inlined arch strings functions. */
+extern int memcmp(const void *, const void *, size_t);
+extern void *memcpy(void *, const void *, size_t);
+extern void *memset(void *, int, size_t);
+extern int strcmp(const char *,const char *);
+extern size_t strlcat(char *, const char *, size_t);
+extern size_t strlcpy(char *, const char *, size_t);
+extern char *strncat(char *, const char *, size_t);
+extern char *strncpy(char *, const char *, size_t);
+extern char *strrchr(const char *, int);
+extern char *strstr(const char *, const char *);
+
+#undef __HAVE_ARCH_MEMMOVE
+#undef __HAVE_ARCH_STRCHR
+#undef __HAVE_ARCH_STRNCHR
+#undef __HAVE_ARCH_STRNCMP
+#undef __HAVE_ARCH_STRNICMP
+#undef __HAVE_ARCH_STRPBRK
+#undef __HAVE_ARCH_STRSEP
+#undef __HAVE_ARCH_STRSPN
+
+#if !defined(IN_ARCH_STRING_C)
+
+static inline void *memchr(const void * s, int c, size_t n)
+{
+	register int r0 asm("0") = (char) c;
+	const void *ret = s + n;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b\n"
+		"	jl	1f\n"
+		"	la	%0,0\n"
+		"1:"
+		: "+a" (ret), "+&a" (s) : "d" (r0) : "cc");
+	return (void *) ret;
+}
+
+static inline void *memscan(void *s, int c, size_t n)
+{
+	register int r0 asm("0") = (char) c;
+	const void *ret = s + n;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b\n"
+		: "+a" (ret), "+&a" (s) : "d" (r0) : "cc");
+	return (void *) ret;
+}
+
+static inline char *strcat(char *dst, const char *src)
+{
+	register int r0 asm("0") = 0;
+	unsigned long dummy;
+	char *ret = dst;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b\n"
+		"1:	mvst	%0,%2\n"
+		"	jo	1b"
+		: "=&a" (dummy), "+a" (dst), "+a" (src)
+		: "d" (r0), "0" (0) : "cc", "memory" );
+	return ret;
+}
+
+static inline char *strcpy(char *dst, const char *src)
+{
+	register int r0 asm("0") = 0;
+	char *ret = dst;
+
+	asm volatile(
+		"0:	mvst	%0,%1\n"
+		"	jo	0b"
+		: "+&a" (dst), "+&a" (src) : "d" (r0)
+		: "cc", "memory");
+	return ret;
+}
+
+static inline size_t strlen(const char *s)
+{
+	register unsigned long r0 asm("0") = 0;
+	const char *tmp = s;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b"
+		: "+d" (r0), "+a" (tmp) :  : "cc");
+	return r0 - (unsigned long) s;
+}
+
+static inline size_t strnlen(const char * s, size_t n)
+{
+	register int r0 asm("0") = 0;
+	const char *tmp = s;
+	const char *end = s + n;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b"
+		: "+a" (end), "+a" (tmp) : "d" (r0)  : "cc");
+	return end - s;
+}
+
+#endif /* !IN_ARCH_STRING_C */
+
+#endif /* __KERNEL__ */
+
+#endif /* __S390_STRING_H_ */
diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h
new file mode 100644
index 00000000000..1f34580e67a
--- /dev/null
+++ b/arch/s390/include/asm/suspend.h
@@ -0,0 +1,5 @@
+#ifndef __ASM_S390_SUSPEND_H
+#define __ASM_S390_SUSPEND_H
+
+#endif
+
diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h
new file mode 100644
index 00000000000..79d01343f8b
--- /dev/null
+++ b/arch/s390/include/asm/sysinfo.h
@@ -0,0 +1,121 @@
+/*
+ * definition for store system information stsi
+ *
+ * Copyright IBM Corp. 2001,2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Ulrich Weigand <weigand@de.ibm.com>
+ *		 Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+#ifndef __ASM_S390_SYSINFO_H
+#define __ASM_S390_SYSINFO_H
+
+struct sysinfo_1_1_1 {
+	char reserved_0[32];
+	char manufacturer[16];
+	char type[4];
+	char reserved_1[12];
+	char model_capacity[16];
+	char sequence[16];
+	char plant[4];
+	char model[16];
+	char model_perm_cap[16];
+	char model_temp_cap[16];
+	char model_cap_rating[4];
+	char model_perm_cap_rating[4];
+	char model_temp_cap_rating[4];
+};
+
+struct sysinfo_1_2_1 {
+	char reserved_0[80];
+	char sequence[16];
+	char plant[4];
+	char reserved_1[2];
+	unsigned short cpu_address;
+};
+
+struct sysinfo_1_2_2 {
+	char format;
+	char reserved_0[1];
+	unsigned short acc_offset;
+	char reserved_1[24];
+	unsigned int secondary_capability;
+	unsigned int capability;
+	unsigned short cpus_total;
+	unsigned short cpus_configured;
+	unsigned short cpus_standby;
+	unsigned short cpus_reserved;
+	unsigned short adjustment[0];
+};
+
+struct sysinfo_1_2_2_extension {
+	unsigned int alt_capability;
+	unsigned short alt_adjustment[0];
+};
+
+struct sysinfo_2_2_1 {
+	char reserved_0[80];
+	char sequence[16];
+	char plant[4];
+	unsigned short cpu_id;
+	unsigned short cpu_address;
+};
+
+struct sysinfo_2_2_2 {
+	char reserved_0[32];
+	unsigned short lpar_number;
+	char reserved_1;
+	unsigned char characteristics;
+	unsigned short cpus_total;
+	unsigned short cpus_configured;
+	unsigned short cpus_standby;
+	unsigned short cpus_reserved;
+	char name[8];
+	unsigned int caf;
+	char reserved_2[16];
+	unsigned short cpus_dedicated;
+	unsigned short cpus_shared;
+};
+
+#define LPAR_CHAR_DEDICATED	(1 << 7)
+#define LPAR_CHAR_SHARED	(1 << 6)
+#define LPAR_CHAR_LIMITED	(1 << 5)
+
+struct sysinfo_3_2_2 {
+	char reserved_0[31];
+	unsigned char count;
+	struct {
+		char reserved_0[4];
+		unsigned short cpus_total;
+		unsigned short cpus_configured;
+		unsigned short cpus_standby;
+		unsigned short cpus_reserved;
+		char name[8];
+		unsigned int caf;
+		char cpi[16];
+		char reserved_1[24];
+
+	} vm[8];
+};
+
+static inline int stsi(void *sysinfo, int fc, int sel1, int sel2)
+{
+	register int r0 asm("0") = (fc << 28) | sel1;
+	register int r1 asm("1") = sel2;
+
+	asm volatile(
+		"   stsi 0(%2)\n"
+		"0: jz   2f\n"
+		"1: lhi  %0,%3\n"
+		"2:\n"
+		EX_TABLE(0b, 1b)
+		: "+d" (r0) : "d" (r1), "a" (sysinfo), "K" (-ENOSYS)
+		: "cc", "memory");
+	return r0;
+}
+
+#endif /* __ASM_S390_SYSINFO_H */
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
new file mode 100644
index 00000000000..819e7d99ca0
--- /dev/null
+++ b/arch/s390/include/asm/system.h
@@ -0,0 +1,462 @@
+/*
+ *  include/asm-s390/system.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *
+ *  Derived from "include/asm-i386/system.h"
+ */
+
+#ifndef __ASM_SYSTEM_H
+#define __ASM_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/lowcore.h>
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+extern struct task_struct *__switch_to(void *, void *);
+
+static inline void save_fp_regs(s390_fp_regs *fpregs)
+{
+	asm volatile(
+		"	std	0,8(%1)\n"
+		"	std	2,24(%1)\n"
+		"	std	4,40(%1)\n"
+		"	std	6,56(%1)"
+		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile(
+		"	stfpc	0(%1)\n"
+		"	std	1,16(%1)\n"
+		"	std	3,32(%1)\n"
+		"	std	5,48(%1)\n"
+		"	std	7,64(%1)\n"
+		"	std	8,72(%1)\n"
+		"	std	9,80(%1)\n"
+		"	std	10,88(%1)\n"
+		"	std	11,96(%1)\n"
+		"	std	12,104(%1)\n"
+		"	std	13,112(%1)\n"
+		"	std	14,120(%1)\n"
+		"	std	15,128(%1)\n"
+		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
+}
+
+static inline void restore_fp_regs(s390_fp_regs *fpregs)
+{
+	asm volatile(
+		"	ld	0,8(%0)\n"
+		"	ld	2,24(%0)\n"
+		"	ld	4,40(%0)\n"
+		"	ld	6,56(%0)"
+		: : "a" (fpregs), "m" (*fpregs));
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile(
+		"	lfpc	0(%0)\n"
+		"	ld	1,16(%0)\n"
+		"	ld	3,32(%0)\n"
+		"	ld	5,48(%0)\n"
+		"	ld	7,64(%0)\n"
+		"	ld	8,72(%0)\n"
+		"	ld	9,80(%0)\n"
+		"	ld	10,88(%0)\n"
+		"	ld	11,96(%0)\n"
+		"	ld	12,104(%0)\n"
+		"	ld	13,112(%0)\n"
+		"	ld	14,120(%0)\n"
+		"	ld	15,128(%0)\n"
+		: : "a" (fpregs), "m" (*fpregs));
+}
+
+static inline void save_access_regs(unsigned int *acrs)
+{
+	asm volatile("stam 0,15,0(%0)" : : "a" (acrs) : "memory");
+}
+
+static inline void restore_access_regs(unsigned int *acrs)
+{
+	asm volatile("lam 0,15,0(%0)" : : "a" (acrs));
+}
+
+#define switch_to(prev,next,last) do {					     \
+	if (prev == next)						     \
+		break;							     \
+	save_fp_regs(&prev->thread.fp_regs);				     \
+	restore_fp_regs(&next->thread.fp_regs);				     \
+	save_access_regs(&prev->thread.acrs[0]);			     \
+	restore_access_regs(&next->thread.acrs[0]);			     \
+	prev = __switch_to(prev,next);					     \
+} while (0)
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_vtime(struct task_struct *);
+extern void account_tick_vtime(struct task_struct *);
+extern void account_system_vtime(struct task_struct *);
+#else
+#define account_vtime(x) do { /* empty */ } while (0)
+#endif
+
+#ifdef CONFIG_PFAULT
+extern void pfault_irq_init(void);
+extern int pfault_init(void);
+extern void pfault_fini(void);
+#else /* CONFIG_PFAULT */
+#define pfault_irq_init()	do { } while (0)
+#define pfault_init()		({-1;})
+#define pfault_fini()		do { } while (0)
+#endif /* CONFIG_PFAULT */
+
+#ifdef CONFIG_PAGE_STATES
+extern void cmma_init(void);
+#else
+static inline void cmma_init(void) { }
+#endif
+
+#define finish_arch_switch(prev) do {					     \
+	set_fs(current->thread.mm_segment);				     \
+	account_vtime(prev);						     \
+} while (0)
+
+#define nop() asm volatile("nop")
+
+#define xchg(ptr,x)							  \
+({									  \
+	__typeof__(*(ptr)) __ret;					  \
+	__ret = (__typeof__(*(ptr)))					  \
+		__xchg((unsigned long)(x), (void *)(ptr),sizeof(*(ptr))); \
+	__ret;								  \
+})
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
+{
+	unsigned long addr, old;
+	int shift;
+
+        switch (size) {
+	case 1:
+		addr = (unsigned long) ptr;
+		shift = (3 ^ (addr & 3)) << 3;
+		addr ^= addr & 3;
+		asm volatile(
+			"	l	%0,0(%4)\n"
+			"0:	lr	0,%0\n"
+			"	nr	0,%3\n"
+			"	or	0,%2\n"
+			"	cs	%0,0,0(%4)\n"
+			"	jl	0b\n"
+			: "=&d" (old), "=m" (*(int *) addr)
+			: "d" (x << shift), "d" (~(255 << shift)), "a" (addr),
+			  "m" (*(int *) addr) : "memory", "cc", "0");
+		return old >> shift;
+	case 2:
+		addr = (unsigned long) ptr;
+		shift = (2 ^ (addr & 2)) << 3;
+		addr ^= addr & 2;
+		asm volatile(
+			"	l	%0,0(%4)\n"
+			"0:	lr	0,%0\n"
+			"	nr	0,%3\n"
+			"	or	0,%2\n"
+			"	cs	%0,0,0(%4)\n"
+			"	jl	0b\n"
+			: "=&d" (old), "=m" (*(int *) addr)
+			: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr),
+			  "m" (*(int *) addr) : "memory", "cc", "0");
+		return old >> shift;
+	case 4:
+		asm volatile(
+			"	l	%0,0(%3)\n"
+			"0:	cs	%0,%2,0(%3)\n"
+			"	jl	0b\n"
+			: "=&d" (old), "=m" (*(int *) ptr)
+			: "d" (x), "a" (ptr), "m" (*(int *) ptr)
+			: "memory", "cc");
+		return old;
+#ifdef __s390x__
+	case 8:
+		asm volatile(
+			"	lg	%0,0(%3)\n"
+			"0:	csg	%0,%2,0(%3)\n"
+			"	jl	0b\n"
+			: "=&d" (old), "=m" (*(long *) ptr)
+			: "d" (x), "a" (ptr), "m" (*(long *) ptr)
+			: "memory", "cc");
+		return old;
+#endif /* __s390x__ */
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#define cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
+					(unsigned long)(n), sizeof(*(ptr))))
+
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	unsigned long addr, prev, tmp;
+	int shift;
+
+        switch (size) {
+	case 1:
+		addr = (unsigned long) ptr;
+		shift = (3 ^ (addr & 3)) << 3;
+		addr ^= addr & 3;
+		asm volatile(
+			"	l	%0,0(%4)\n"
+			"0:	nr	%0,%5\n"
+			"	lr	%1,%0\n"
+			"	or	%0,%2\n"
+			"	or	%1,%3\n"
+			"	cs	%0,%1,0(%4)\n"
+			"	jnl	1f\n"
+			"	xr	%1,%0\n"
+			"	nr	%1,%5\n"
+			"	jnz	0b\n"
+			"1:"
+			: "=&d" (prev), "=&d" (tmp)
+			: "d" (old << shift), "d" (new << shift), "a" (ptr),
+			  "d" (~(255 << shift))
+			: "memory", "cc");
+		return prev >> shift;
+	case 2:
+		addr = (unsigned long) ptr;
+		shift = (2 ^ (addr & 2)) << 3;
+		addr ^= addr & 2;
+		asm volatile(
+			"	l	%0,0(%4)\n"
+			"0:	nr	%0,%5\n"
+			"	lr	%1,%0\n"
+			"	or	%0,%2\n"
+			"	or	%1,%3\n"
+			"	cs	%0,%1,0(%4)\n"
+			"	jnl	1f\n"
+			"	xr	%1,%0\n"
+			"	nr	%1,%5\n"
+			"	jnz	0b\n"
+			"1:"
+			: "=&d" (prev), "=&d" (tmp)
+			: "d" (old << shift), "d" (new << shift), "a" (ptr),
+			  "d" (~(65535 << shift))
+			: "memory", "cc");
+		return prev >> shift;
+	case 4:
+		asm volatile(
+			"	cs	%0,%2,0(%3)\n"
+			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
+			: "memory", "cc");
+		return prev;
+#ifdef __s390x__
+	case 8:
+		asm volatile(
+			"	csg	%0,%2,0(%3)\n"
+			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
+			: "memory", "cc");
+		return prev;
+#endif /* __s390x__ */
+        }
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * This is very similar to the ppc eieio/sync instruction in that is
+ * does a checkpoint syncronisation & makes sure that 
+ * all memory ops have completed wrt other CPU's ( see 7-15 POP  DJB ).
+ */
+
+#define eieio()	asm volatile("bcr 15,0" : : : "memory")
+#define SYNC_OTHER_CORES(x)   eieio()
+#define mb()    eieio()
+#define rmb()   eieio()
+#define wmb()   eieio()
+#define read_barrier_depends() do { } while(0)
+#define smp_mb()       mb()
+#define smp_rmb()      rmb()
+#define smp_wmb()      wmb()
+#define smp_read_barrier_depends()    read_barrier_depends()
+#define smp_mb__before_clear_bit()     smp_mb()
+#define smp_mb__after_clear_bit()      smp_mb()
+
+
+#define set_mb(var, value)      do { var = value; mb(); } while (0)
+
+#ifdef __s390x__
+
+#define __ctl_load(array, low, high) ({				\
+	typedef struct { char _[sizeof(array)]; } addrtype;	\
+	asm volatile(						\
+		"	lctlg	%1,%2,0(%0)\n"			\
+		: : "a" (&array), "i" (low), "i" (high),	\
+		    "m" (*(addrtype *)(&array)));		\
+	})
+
+#define __ctl_store(array, low, high) ({			\
+	typedef struct { char _[sizeof(array)]; } addrtype;	\
+	asm volatile(						\
+		"	stctg	%2,%3,0(%1)\n"			\
+		: "=m" (*(addrtype *)(&array))			\
+		: "a" (&array), "i" (low), "i" (high));		\
+	})
+
+#else /* __s390x__ */
+
+#define __ctl_load(array, low, high) ({				\
+	typedef struct { char _[sizeof(array)]; } addrtype;	\
+	asm volatile(						\
+		"	lctl	%1,%2,0(%0)\n"			\
+		: : "a" (&array), "i" (low), "i" (high),	\
+		    "m" (*(addrtype *)(&array)));		\
+})
+
+#define __ctl_store(array, low, high) ({			\
+	typedef struct { char _[sizeof(array)]; } addrtype;	\
+	asm volatile(						\
+		"	stctl	%2,%3,0(%1)\n"			\
+		: "=m" (*(addrtype *)(&array))			\
+		: "a" (&array), "i" (low), "i" (high));		\
+	})
+
+#endif /* __s390x__ */
+
+#define __ctl_set_bit(cr, bit) ({	\
+	unsigned long __dummy;		\
+	__ctl_store(__dummy, cr, cr);	\
+	__dummy |= 1UL << (bit);	\
+	__ctl_load(__dummy, cr, cr);	\
+})
+
+#define __ctl_clear_bit(cr, bit) ({	\
+	unsigned long __dummy;		\
+	__ctl_store(__dummy, cr, cr);	\
+	__dummy &= ~(1UL << (bit));	\
+	__ctl_load(__dummy, cr, cr);	\
+})
+
+#include <linux/irqflags.h>
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 1:
+	case 2:
+	case 4:
+#ifdef __s390x__
+	case 8:
+#endif
+		return __cmpxchg(ptr, old, new, size);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+			(unsigned long)(n), sizeof(*(ptr))))
+#ifdef __s390x__
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+/*
+ * Use to set psw mask except for the first byte which
+ * won't be changed by this function.
+ */
+static inline void
+__set_psw_mask(unsigned long mask)
+{
+	__load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8)));
+}
+
+#define local_mcck_enable()  __set_psw_mask(psw_kernel_bits)
+#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK)
+
+int stfle(unsigned long long *list, int doublewords);
+
+#ifdef CONFIG_SMP
+
+extern void smp_ctl_set_bit(int cr, int bit);
+extern void smp_ctl_clear_bit(int cr, int bit);
+#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
+#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
+
+#else
+
+#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
+#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
+
+#endif /* CONFIG_SMP */
+
+static inline unsigned int stfl(void)
+{
+	asm volatile(
+		"	.insn	s,0xb2b10000,0(0)\n" /* stfl */
+		"0:\n"
+		EX_TABLE(0b,0b));
+	return S390_lowcore.stfl_fac_list;
+}
+
+static inline unsigned short stap(void)
+{
+	unsigned short cpu_address;
+
+	asm volatile("stap %0" : "=m" (cpu_address));
+	return cpu_address;
+}
+
+extern void (*_machine_restart)(char *command);
+extern void (*_machine_halt)(void);
+extern void (*_machine_power_off)(void);
+
+#define arch_align_stack(x) (x)
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+extern psw_t sysc_restore_trace_psw;
+extern psw_t io_restore_trace_psw;
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/s390/include/asm/tape390.h b/arch/s390/include/asm/tape390.h
new file mode 100644
index 00000000000..884fba48f1f
--- /dev/null
+++ b/arch/s390/include/asm/tape390.h
@@ -0,0 +1,103 @@
+/*************************************************************************
+ *
+ * tape390.h
+ *	   enables user programs to display messages and control encryption
+ *	   on s390 tape devices
+ *
+ *	   Copyright IBM Corp. 2001,2006
+ *	   Author(s): Michael Holzheu <holzheu@de.ibm.com>
+ *
+ *************************************************************************/
+
+#ifndef _TAPE390_H
+#define _TAPE390_H
+
+#define TAPE390_DISPLAY _IOW('d', 1, struct display_struct)
+
+/*
+ * The TAPE390_DISPLAY ioctl calls the Load Display command
+ * which transfers 17 bytes of data from the channel to the subsystem:
+ *     - 1 format control byte, and
+ *     - two 8-byte messages
+ *
+ * Format control byte:
+ *   0-2: New Message Overlay
+ *     3: Alternate Messages
+ *     4: Blink Message
+ *     5: Display Low/High Message
+ *     6: Reserved
+ *     7: Automatic Load Request
+ *
+ */
+
+typedef struct display_struct {
+        char cntrl;
+        char message1[8];
+        char message2[8];
+} display_struct;
+
+/*
+ * Tape encryption support
+ */
+
+struct tape390_crypt_info {
+	char capability;
+	char status;
+	char medium_status;
+} __attribute__ ((packed));
+
+
+/* Macros for "capable" field */
+#define TAPE390_CRYPT_SUPPORTED_MASK 0x01
+#define TAPE390_CRYPT_SUPPORTED(x) \
+	((x.capability & TAPE390_CRYPT_SUPPORTED_MASK))
+
+/* Macros for "status" field */
+#define TAPE390_CRYPT_ON_MASK 0x01
+#define TAPE390_CRYPT_ON(x) (((x.status) & TAPE390_CRYPT_ON_MASK))
+
+/* Macros for "medium status" field */
+#define TAPE390_MEDIUM_LOADED_MASK 0x01
+#define TAPE390_MEDIUM_ENCRYPTED_MASK 0x02
+#define TAPE390_MEDIUM_ENCRYPTED(x) \
+	(((x.medium_status) & TAPE390_MEDIUM_ENCRYPTED_MASK))
+#define TAPE390_MEDIUM_LOADED(x) \
+	(((x.medium_status) & TAPE390_MEDIUM_LOADED_MASK))
+
+/*
+ * The TAPE390_CRYPT_SET ioctl is used to switch on/off encryption.
+ * The "encryption_capable" and "tape_status" fields are ignored for this ioctl!
+ */
+#define TAPE390_CRYPT_SET _IOW('d', 2, struct tape390_crypt_info)
+
+/*
+ * The TAPE390_CRYPT_QUERY ioctl is used to query the encryption state.
+ */
+#define TAPE390_CRYPT_QUERY _IOR('d', 3, struct tape390_crypt_info)
+
+/* Values for "kekl1/2_type" and "kekl1/2_type_on_tape" fields */
+#define TAPE390_KEKL_TYPE_NONE 0
+#define TAPE390_KEKL_TYPE_LABEL 1
+#define TAPE390_KEKL_TYPE_HASH 2
+
+struct tape390_kekl {
+	unsigned char type;
+	unsigned char type_on_tape;
+	char label[65];
+} __attribute__ ((packed));
+
+struct tape390_kekl_pair {
+	struct tape390_kekl kekl[2];
+} __attribute__ ((packed));
+
+/*
+ * The TAPE390_KEKL_SET ioctl is used to set Key Encrypting Key labels.
+ */
+#define TAPE390_KEKL_SET _IOW('d', 4, struct tape390_kekl_pair)
+
+/*
+ * The TAPE390_KEKL_QUERY ioctl is used to query Key Encrypting Key labels.
+ */
+#define TAPE390_KEKL_QUERY _IOR('d', 5, struct tape390_kekl_pair)
+
+#endif 
diff --git a/arch/s390/include/asm/termbits.h b/arch/s390/include/asm/termbits.h
new file mode 100644
index 00000000000..58731853d52
--- /dev/null
+++ b/arch/s390/include/asm/termbits.h
@@ -0,0 +1,206 @@
+/*
+ *  include/asm-s390/termbits.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/termbits.h"
+ */
+
+#ifndef __ARCH_S390_TERMBITS_H__
+#define __ARCH_S390_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define  BOTHER  0010000
+#define  B57600  0010001
+#define  B115200 0010002
+#define  B230400 0010003
+#define  B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif
diff --git a/arch/s390/include/asm/termios.h b/arch/s390/include/asm/termios.h
new file mode 100644
index 00000000000..67f66278f53
--- /dev/null
+++ b/arch/s390/include/asm/termios.h
@@ -0,0 +1,67 @@
+/*
+ *  include/asm-s390/termios.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/termios.h"
+ */
+
+#ifndef _S390_TERMIOS_H
+#define _S390_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+
+#include <asm-generic/termios.h>
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _S390_TERMIOS_H */
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
new file mode 100644
index 00000000000..91a8f93ad35
--- /dev/null
+++ b/arch/s390/include/asm/thread_info.h
@@ -0,0 +1,118 @@
+/*
+ *  include/asm-s390/thread_info.h
+ *
+ *  S390 version
+ *    Copyright (C) IBM Corp. 2002,2006
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/*
+ * Size of kernel stack for each process
+ */
+#ifndef __s390x__
+#ifndef __SMALL_STACK
+#define THREAD_ORDER 1
+#define ASYNC_ORDER  1
+#else
+#define THREAD_ORDER 0
+#define ASYNC_ORDER  0
+#endif
+#else /* __s390x__ */
+#ifndef __SMALL_STACK
+#define THREAD_ORDER 2
+#define ASYNC_ORDER  2
+#else
+#define THREAD_ORDER 1
+#define ASYNC_ORDER  1
+#endif
+#endif /* __s390x__ */
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
+#define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/lowcore.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned int		cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE);
+}
+
+#define THREAD_SIZE_ORDER THREAD_ORDER
+
+#endif
+
+/*
+ * thread information flags bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_RESTART_SVC		4	/* restart svc with new svc number */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
+#define TIF_MCCK_PENDING	7	/* machine check handling is pending */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
+					   TIF_NEED_RESCHED */
+#define TIF_31BIT		18	/* 32bit process */ 
+#define TIF_MEMDIE		19
+#define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
+#define _TIF_MCCK_PENDING	(1<<TIF_MCCK_PENDING)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_31BIT		(1<<TIF_31BIT)
+
+#endif /* __KERNEL__ */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/s390/include/asm/timer.h b/arch/s390/include/asm/timer.h
new file mode 100644
index 00000000000..d98d79e35cd
--- /dev/null
+++ b/arch/s390/include/asm/timer.h
@@ -0,0 +1,65 @@
+/*
+ *  include/asm-s390/timer.h
+ *
+ *  (C) Copyright IBM Corp. 2003,2006
+ *  Virtual CPU timer
+ *
+ *  Author: Jan Glauber (jang@de.ibm.com)
+ */
+
+#ifndef _ASM_S390_TIMER_H
+#define _ASM_S390_TIMER_H
+
+#ifdef __KERNEL__
+
+#include <linux/timer.h>
+
+#define VTIMER_MAX_SLICE (0x7ffffffffffff000LL)
+
+struct vtimer_list {
+	struct list_head entry;
+
+	int cpu;
+	__u64 expires;
+	__u64 interval;
+
+	spinlock_t lock;
+	unsigned long magic;
+
+	void (*function)(unsigned long);
+	unsigned long data;
+};
+
+/* the offset value will wrap after ca. 71 years */
+struct vtimer_queue {
+	struct list_head list;
+	spinlock_t lock;
+	__u64 to_expire;	  /* current event expire time */
+	__u64 offset;		  /* list offset to zero */
+	__u64 idle;		  /* temp var for idle */
+};
+
+extern void init_virt_timer(struct vtimer_list *timer);
+extern void add_virt_timer(void *new);
+extern void add_virt_timer_periodic(void *new);
+extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int del_virt_timer(struct vtimer_list *timer);
+
+extern void init_cpu_vtimer(void);
+extern void vtime_init(void);
+
+#ifdef CONFIG_VIRT_TIMER
+
+extern void vtime_start_cpu_timer(void);
+extern void vtime_stop_cpu_timer(void);
+
+#else
+
+static inline void vtime_start_cpu_timer(void) { }
+static inline void vtime_stop_cpu_timer(void) { }
+
+#endif /* CONFIG_VIRT_TIMER */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_S390_TIMER_H */
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
new file mode 100644
index 00000000000..d744c3d62de
--- /dev/null
+++ b/arch/s390/include/asm/timex.h
@@ -0,0 +1,88 @@
+/*
+ *  include/asm-s390/timex.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *
+ *  Derived from "include/asm-i386/timex.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ */
+
+#ifndef _ASM_S390_TIMEX_H
+#define _ASM_S390_TIMEX_H
+
+/* Inline functions for clock register access. */
+static inline int set_clock(__u64 time)
+{
+	int cc;
+
+	asm volatile(
+		"   sck   0(%2)\n"
+		"   ipm   %0\n"
+		"   srl   %0,28\n"
+		: "=d" (cc) : "m" (time), "a" (&time) : "cc");
+	return cc;
+}
+
+static inline int store_clock(__u64 *time)
+{
+	int cc;
+
+	asm volatile(
+		"   stck  0(%2)\n"
+		"   ipm   %0\n"
+		"   srl   %0,28\n"
+		: "=d" (cc), "=m" (*time) : "a" (time) : "cc");
+	return cc;
+}
+
+static inline void set_clock_comparator(__u64 time)
+{
+	asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time));
+}
+
+static inline void store_clock_comparator(__u64 *time)
+{
+	asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time));
+}
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static inline unsigned long long get_clock (void)
+{
+	unsigned long long clk;
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+	asm volatile("stck %0" : "=Q" (clk) : : "cc");
+#else /* __GNUC__ */
+	asm volatile("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc");
+#endif /* __GNUC__ */
+	return clk;
+}
+
+static inline unsigned long long get_clock_xt(void)
+{
+	unsigned char clk[16];
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+	asm volatile("stcke %0" : "=Q" (clk) : : "cc");
+#else /* __GNUC__ */
+	asm volatile("stcke 0(%1)" : "=m" (clk)
+				   : "a" (clk) : "cc");
+#endif /* __GNUC__ */
+
+	return *((unsigned long long *)&clk[1]);
+}
+
+static inline cycles_t get_cycles(void)
+{
+	return (cycles_t) get_clock() >> 2;
+}
+
+int get_sync_clock(unsigned long long *clock);
+void init_cpu_timer(void);
+unsigned long long monotonic_clock(void);
+
+#endif
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
new file mode 100644
index 00000000000..3d8a96d39d9
--- /dev/null
+++ b/arch/s390/include/asm/tlb.h
@@ -0,0 +1,156 @@
+#ifndef _S390_TLB_H
+#define _S390_TLB_H
+
+/*
+ * TLB flushing on s390 is complicated. The following requirement
+ * from the principles of operation is the most arduous:
+ *
+ * "A valid table entry must not be changed while it is attached
+ * to any CPU and may be used for translation by that CPU except to
+ * (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY,
+ * or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page
+ * table entry, or (3) make a change by means of a COMPARE AND SWAP
+ * AND PURGE instruction that purges the TLB."
+ *
+ * The modification of a pte of an active mm struct therefore is
+ * a two step process: i) invalidate the pte, ii) store the new pte.
+ * This is true for the page protection bit as well.
+ * The only possible optimization is to flush at the beginning of
+ * a tlb_gather_mmu cycle if the mm_struct is currently not in use.
+ *
+ * Pages used for the page tables is a different story. FIXME: more
+ */
+
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <asm/processor.h>
+#include <asm/pgalloc.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+
+#ifndef CONFIG_SMP
+#define TLB_NR_PTRS	1
+#else
+#define TLB_NR_PTRS	508
+#endif
+
+struct mmu_gather {
+	struct mm_struct *mm;
+	unsigned int fullmm;
+	unsigned int nr_ptes;
+	unsigned int nr_pxds;
+	void *array[TLB_NR_PTRS];
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm,
+						unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	tlb->fullmm = full_mm_flush || (num_online_cpus() == 1) ||
+		(atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm);
+	tlb->nr_ptes = 0;
+	tlb->nr_pxds = TLB_NR_PTRS;
+	if (tlb->fullmm)
+		__tlb_flush_mm(mm);
+	return tlb;
+}
+
+static inline void tlb_flush_mmu(struct mmu_gather *tlb,
+				 unsigned long start, unsigned long end)
+{
+	if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < TLB_NR_PTRS))
+		__tlb_flush_mm(tlb->mm);
+	while (tlb->nr_ptes > 0)
+		pte_free(tlb->mm, tlb->array[--tlb->nr_ptes]);
+	while (tlb->nr_pxds < TLB_NR_PTRS)
+		/* pgd_free frees the pointer as region or segment table */
+		pgd_free(tlb->mm, tlb->array[tlb->nr_pxds++]);
+}
+
+static inline void tlb_finish_mmu(struct mmu_gather *tlb,
+				  unsigned long start, unsigned long end)
+{
+	tlb_flush_mmu(tlb, start, end);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+/*
+ * Release the page cache reference for a pte removed by
+ * tlb_ptep_clear_flush. In both flush modes the tlb fo a page cache page
+ * has already been freed, so just do free_page_and_swap_cache.
+ */
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	free_page_and_swap_cache(page);
+}
+
+/*
+ * pte_free_tlb frees a pte table and clears the CRSTE for the
+ * page table from the tlb.
+ */
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
+{
+	if (!tlb->fullmm) {
+		tlb->array[tlb->nr_ptes++] = pte;
+		if (tlb->nr_ptes >= tlb->nr_pxds)
+			tlb_flush_mmu(tlb, 0, 0);
+	} else
+		pte_free(tlb->mm, pte);
+}
+
+/*
+ * pmd_free_tlb frees a pmd table and clears the CRSTE for the
+ * segment table entry from the tlb.
+ * If the mm uses a two level page table the single pmd is freed
+ * as the pgd. pmd_free_tlb checks the asce_limit against 2GB
+ * to avoid the double free of the pmd in this case.
+ */
+static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+{
+#ifdef __s390x__
+	if (tlb->mm->context.asce_limit <= (1UL << 31))
+		return;
+	if (!tlb->fullmm) {
+		tlb->array[--tlb->nr_pxds] = pmd;
+		if (tlb->nr_ptes >= tlb->nr_pxds)
+			tlb_flush_mmu(tlb, 0, 0);
+	} else
+		pmd_free(tlb->mm, pmd);
+#endif
+}
+
+/*
+ * pud_free_tlb frees a pud table and clears the CRSTE for the
+ * region third table entry from the tlb.
+ * If the mm uses a three level page table the single pud is freed
+ * as the pgd. pud_free_tlb checks the asce_limit against 4TB
+ * to avoid the double free of the pud in this case.
+ */
+static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+{
+#ifdef __s390x__
+	if (tlb->mm->context.asce_limit <= (1UL << 42))
+		return;
+	if (!tlb->fullmm) {
+		tlb->array[--tlb->nr_pxds] = pud;
+		if (tlb->nr_ptes >= tlb->nr_pxds)
+			tlb_flush_mmu(tlb, 0, 0);
+	} else
+		pud_free(tlb->mm, pud);
+#endif
+}
+
+#define tlb_start_vma(tlb, vma)			do { } while (0)
+#define tlb_end_vma(tlb, vma)			do { } while (0)
+#define tlb_remove_tlb_entry(tlb, ptep, addr)	do { } while (0)
+#define tlb_migrate_finish(mm)			do { } while (0)
+
+#endif /* _S390_TLB_H */
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
new file mode 100644
index 00000000000..d60394b9745
--- /dev/null
+++ b/arch/s390/include/asm/tlbflush.h
@@ -0,0 +1,140 @@
+#ifndef _S390_TLBFLUSH_H
+#define _S390_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <asm/processor.h>
+#include <asm/pgalloc.h>
+
+/*
+ * Flush all tlb entries on the local cpu.
+ */
+static inline void __tlb_flush_local(void)
+{
+	asm volatile("ptlb" : : : "memory");
+}
+
+#ifdef CONFIG_SMP
+/*
+ * Flush all tlb entries on all cpus.
+ */
+void smp_ptlb_all(void);
+
+static inline void __tlb_flush_global(void)
+{
+	register unsigned long reg2 asm("2");
+	register unsigned long reg3 asm("3");
+	register unsigned long reg4 asm("4");
+	long dummy;
+
+#ifndef __s390x__
+	if (!MACHINE_HAS_CSP) {
+		smp_ptlb_all();
+		return;
+	}
+#endif /* __s390x__ */
+
+	dummy = 0;
+	reg2 = reg3 = 0;
+	reg4 = ((unsigned long) &dummy) + 1;
+	asm volatile(
+		"	csp	%0,%2"
+		: : "d" (reg2), "d" (reg3), "d" (reg4), "m" (dummy) : "cc" );
+}
+
+static inline void __tlb_flush_full(struct mm_struct *mm)
+{
+	cpumask_t local_cpumask;
+
+	preempt_disable();
+	/*
+	 * If the process only ran on the local cpu, do a local flush.
+	 */
+	local_cpumask = cpumask_of_cpu(smp_processor_id());
+	if (cpus_equal(mm->cpu_vm_mask, local_cpumask))
+		__tlb_flush_local();
+	else
+		__tlb_flush_global();
+	preempt_enable();
+}
+#else
+#define __tlb_flush_full(mm)	__tlb_flush_local()
+#endif
+
+/*
+ * Flush all tlb entries of a page table on all cpus.
+ */
+static inline void __tlb_flush_idte(unsigned long asce)
+{
+	asm volatile(
+		"	.insn	rrf,0xb98e0000,0,%0,%1,0"
+		: : "a" (2048), "a" (asce) : "cc" );
+}
+
+static inline void __tlb_flush_mm(struct mm_struct * mm)
+{
+	if (unlikely(cpus_empty(mm->cpu_vm_mask)))
+		return;
+	/*
+	 * If the machine has IDTE we prefer to do a per mm flush
+	 * on all cpus instead of doing a local flush if the mm
+	 * only ran on the local cpu.
+	 */
+	if (MACHINE_HAS_IDTE) {
+		if (mm->context.noexec)
+			__tlb_flush_idte((unsigned long)
+					 get_shadow_table(mm->pgd) |
+					 mm->context.asce_bits);
+		__tlb_flush_idte((unsigned long) mm->pgd |
+				 mm->context.asce_bits);
+		return;
+	}
+	__tlb_flush_full(mm);
+}
+
+static inline void __tlb_flush_mm_cond(struct mm_struct * mm)
+{
+	if (atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm)
+		__tlb_flush_mm(mm);
+}
+
+/*
+ * TLB flushing:
+ *  flush_tlb() - flushes the current mm struct TLBs
+ *  flush_tlb_all() - flushes all processes TLBs
+ *  flush_tlb_mm(mm) - flushes the specified mm context TLB's
+ *  flush_tlb_page(vma, vmaddr) - flushes one page
+ *  flush_tlb_range(vma, start, end) - flushes a range of pages
+ *  flush_tlb_kernel_range(start, end) - flushes a range of kernel pages
+ */
+
+/*
+ * flush_tlb_mm goes together with ptep_set_wrprotect for the
+ * copy_page_range operation and flush_tlb_range is related to
+ * ptep_get_and_clear for change_protection. ptep_set_wrprotect and
+ * ptep_get_and_clear do not flush the TLBs directly if the mm has
+ * only one user. At the end of the update the flush_tlb_mm and
+ * flush_tlb_range functions need to do the flush.
+ */
+#define flush_tlb()				do { } while (0)
+#define flush_tlb_all()				do { } while (0)
+#define flush_tlb_page(vma, addr)		do { } while (0)
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	__tlb_flush_mm_cond(mm);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	__tlb_flush_mm_cond(vma->vm_mm);
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	__tlb_flush_mm(&init_mm);
+}
+
+#endif /* _S390_TLBFLUSH_H */
diff --git a/arch/s390/include/asm/todclk.h b/arch/s390/include/asm/todclk.h
new file mode 100644
index 00000000000..c7f62055488
--- /dev/null
+++ b/arch/s390/include/asm/todclk.h
@@ -0,0 +1,23 @@
+/*
+ * File...........: linux/include/asm/todclk.h
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ *
+ * History of changes (starts July 2000)
+ */
+
+#ifndef __ASM_TODCLK_H
+#define __ASM_TODCLK_H
+
+#ifdef __KERNEL__
+
+#define TOD_uSEC (0x1000ULL)
+#define TOD_mSEC (1000 * TOD_uSEC)
+#define TOD_SEC (1000 * TOD_mSEC)
+#define TOD_MIN (60 * TOD_SEC)
+#define TOD_HOUR (60 * TOD_MIN)
+
+#endif
+
+#endif
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
new file mode 100644
index 00000000000..d96c9164345
--- /dev/null
+++ b/arch/s390/include/asm/topology.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_S390_TOPOLOGY_H
+#define _ASM_S390_TOPOLOGY_H
+
+#include <linux/cpumask.h>
+
+#define mc_capable()	(1)
+
+cpumask_t cpu_coregroup_map(unsigned int cpu);
+
+extern cpumask_t cpu_core_map[NR_CPUS];
+
+#define topology_core_siblings(cpu)	(cpu_core_map[cpu])
+
+int topology_set_cpu_management(int fc);
+void topology_schedule_update(void);
+
+#define POLARIZATION_UNKNWN	(-1)
+#define POLARIZATION_HRZ	(0)
+#define POLARIZATION_VL		(1)
+#define POLARIZATION_VM		(2)
+#define POLARIZATION_VH		(3)
+
+#ifdef CONFIG_SMP
+void s390_init_cpu_topology(void);
+#else
+static inline void s390_init_cpu_topology(void)
+{
+};
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_S390_TOPOLOGY_H */
diff --git a/arch/s390/include/asm/types.h b/arch/s390/include/asm/types.h
new file mode 100644
index 00000000000..41c54765613
--- /dev/null
+++ b/arch/s390/include/asm/types.h
@@ -0,0 +1,63 @@
+/*
+ *  include/asm-s390/types.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/types.h"
+ */
+
+#ifndef _S390_TYPES_H
+#define _S390_TYPES_H
+
+#ifndef __s390x__
+# include <asm-generic/int-ll64.h>
+#else
+# include <asm-generic/int-l64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/* A address type so that arithmetic can be done on it & it can be upgraded to
+   64 bit when necessary 
+*/
+typedef unsigned long addr_t; 
+typedef __signed__ long saddr_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifndef __s390x__
+#define BITS_PER_LONG 32
+#else
+#define BITS_PER_LONG 64
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef u64 dma64_addr_t;
+#ifdef __s390x__
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+
+#ifndef __s390x__
+typedef union {
+	unsigned long long pair;
+	struct {
+		unsigned long even;
+		unsigned long odd;
+	} subreg;
+} register_pair;
+
+#endif /* ! __s390x__   */
+#endif /* __ASSEMBLY__  */
+#endif /* __KERNEL__    */
+#endif /* _S390_TYPES_H */
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
new file mode 100644
index 00000000000..0235970278f
--- /dev/null
+++ b/arch/s390/include/asm/uaccess.h
@@ -0,0 +1,363 @@
+/*
+ *  include/asm-s390/uaccess.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/uaccess.h"
+ */
+#ifndef __S390_UACCESS_H
+#define __S390_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/errno.h>
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(a)  ((mm_segment_t) { (a) })
+
+
+#define KERNEL_DS       MAKE_MM_SEG(0)
+#define USER_DS         MAKE_MM_SEG(1)
+
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current->thread.mm_segment)
+
+#define set_fs(x) \
+({									\
+	unsigned long __pto;						\
+	current->thread.mm_segment = (x);				\
+	__pto = current->thread.mm_segment.ar4 ?			\
+		S390_lowcore.user_asce : S390_lowcore.kernel_asce;	\
+	__ctl_load(__pto, 7, 7);					\
+})
+
+#define segment_eq(a,b) ((a).ar4 == (b).ar4)
+
+
+static inline int __access_ok(const void __user *addr, unsigned long size)
+{
+	return 1;
+}
+#define access_ok(type,addr,size) __access_ok(addr,size)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+struct uaccess_ops {
+	size_t (*copy_from_user)(size_t, const void __user *, void *);
+	size_t (*copy_from_user_small)(size_t, const void __user *, void *);
+	size_t (*copy_to_user)(size_t, void __user *, const void *);
+	size_t (*copy_to_user_small)(size_t, void __user *, const void *);
+	size_t (*copy_in_user)(size_t, void __user *, const void __user *);
+	size_t (*clear_user)(size_t, void __user *);
+	size_t (*strnlen_user)(size_t, const char __user *);
+	size_t (*strncpy_from_user)(size_t, const char __user *, char *);
+	int (*futex_atomic_op)(int op, int __user *, int oparg, int *old);
+	int (*futex_atomic_cmpxchg)(int __user *, int old, int new);
+};
+
+extern struct uaccess_ops uaccess;
+extern struct uaccess_ops uaccess_std;
+extern struct uaccess_ops uaccess_mvcos;
+extern struct uaccess_ops uaccess_mvcos_switch;
+extern struct uaccess_ops uaccess_pt;
+
+static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
+{
+	size = uaccess.copy_to_user_small(size, ptr, x);
+	return size ? -EFAULT : size;
+}
+
+static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
+{
+	size = uaccess.copy_from_user_small(size, ptr, x);
+	return size ? -EFAULT : size;
+}
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+#define __put_user(x, ptr) \
+({								\
+	__typeof__(*(ptr)) __x = (x);				\
+	int __pu_err = -EFAULT;					\
+        __chk_user_ptr(ptr);                                    \
+	switch (sizeof (*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+	case 8:							\
+		__pu_err = __put_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		break;						\
+	default:						\
+		__put_user_bad();				\
+		break;						\
+	 }							\
+	__pu_err;						\
+})
+
+#define put_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__put_user(x, ptr);					\
+})
+
+
+extern int __put_user_bad(void) __attribute__((noreturn));
+
+#define __get_user(x, ptr)					\
+({								\
+	int __gu_err = -EFAULT;					\
+	__chk_user_ptr(ptr);					\
+	switch (sizeof(*(ptr))) {				\
+	case 1: {						\
+		unsigned char __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 2: {						\
+		unsigned short __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 4: {						\
+		unsigned int __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 8: {						\
+		unsigned long long __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	default:						\
+		__get_user_bad();				\
+		break;						\
+	}							\
+	__gu_err;						\
+})
+
+#define get_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__get_user(x, ptr);					\
+})
+
+extern int __get_user_bad(void) __attribute__((noreturn));
+
+#define __put_user_unaligned __put_user
+#define __get_user_unaligned __get_user
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 256))
+		return uaccess.copy_to_user_small(n, to, from);
+	else
+		return uaccess.copy_to_user(n, to, from);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/**
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long __must_check
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 256))
+		return uaccess.copy_from_user_small(n, from, to);
+	else
+		return uaccess.copy_from_user(n, from, to);
+}
+
+/**
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else
+		memset(to, 0, n);
+	return n;
+}
+
+static inline unsigned long __must_check
+__copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	return uaccess.copy_in_user(n, to, from);
+}
+
+static inline unsigned long __must_check
+copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (__access_ok(from,n) && __access_ok(to,n))
+		n = __copy_in_user(to, from, n);
+	return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+static inline long __must_check
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+        long res = -EFAULT;
+        might_sleep();
+        if (access_ok(VERIFY_READ, src, 1))
+		res = uaccess.strncpy_from_user(count, src, dst);
+        return res;
+}
+
+static inline unsigned long
+strnlen_user(const char __user * src, unsigned long n)
+{
+	might_sleep();
+	return uaccess.strnlen_user(n, src);
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, ~0UL)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long __must_check
+__clear_user(void __user *to, unsigned long n)
+{
+	return uaccess.clear_user(n, to);
+}
+
+static inline unsigned long __must_check
+clear_user(void __user *to, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = uaccess.clear_user(n, to);
+	return n;
+}
+
+#endif /* __S390_UACCESS_H */
diff --git a/arch/s390/include/asm/ucontext.h b/arch/s390/include/asm/ucontext.h
new file mode 100644
index 00000000000..d69bec0b03f
--- /dev/null
+++ b/arch/s390/include/asm/ucontext.h
@@ -0,0 +1,20 @@
+/*
+ *  include/asm-s390/ucontext.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/ucontext.h"
+ */
+
+#ifndef _ASM_S390_UCONTEXT_H
+#define _ASM_S390_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	_sigregs          uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASM_S390_UCONTEXT_H */
diff --git a/arch/s390/include/asm/unaligned.h b/arch/s390/include/asm/unaligned.h
new file mode 100644
index 00000000000..da9627afe5d
--- /dev/null
+++ b/arch/s390/include/asm/unaligned.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_S390_UNALIGNED_H
+#define _ASM_S390_UNALIGNED_H
+
+/*
+ * The S390 can do unaligned accesses itself. 
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_S390_UNALIGNED_H */
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
new file mode 100644
index 00000000000..c8ad350d144
--- /dev/null
+++ b/arch/s390/include/asm/unistd.h
@@ -0,0 +1,411 @@
+/*
+ *  include/asm-s390/unistd.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/unistd.h"
+ */
+
+#ifndef _ASM_S390_UNISTD_H_
+#define _ASM_S390_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_restart_syscall	  7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_brk                 45
+#define __NR_signal              48
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_setpgid             57
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_symlink             83
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_lookup_dcookie     110
+#define __NR_vhangup            111
+#define __NR_idle               112
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_getdents           141
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg		188
+#define __NR_putpmsg		189
+#define __NR_vfork		190
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+#define __NR_getdents64		220
+#define __NR_readahead		222
+#define __NR_setxattr		224
+#define __NR_lsetxattr		225
+#define __NR_fsetxattr		226
+#define __NR_getxattr		227
+#define __NR_lgetxattr		228
+#define __NR_fgetxattr		229
+#define __NR_listxattr		230
+#define __NR_llistxattr		231
+#define __NR_flistxattr		232
+#define __NR_removexattr	233
+#define __NR_lremovexattr	234
+#define __NR_fremovexattr	235
+#define __NR_gettid		236
+#define __NR_tkill		237
+#define __NR_futex		238
+#define __NR_sched_setaffinity	239
+#define __NR_sched_getaffinity	240
+#define __NR_tgkill		241
+/* Number 242 is reserved for tux */
+#define __NR_io_setup		243
+#define __NR_io_destroy		244
+#define __NR_io_getevents	245
+#define __NR_io_submit		246
+#define __NR_io_cancel		247
+#define __NR_exit_group		248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_set_tid_address	252
+#define __NR_fadvise64		253
+#define __NR_timer_create	254
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+/* Number 263 is reserved for vserver */
+#define __NR_statfs64		265
+#define __NR_fstatfs64		266
+#define __NR_remap_file_pages	267
+/* Number 268 is reserved for new sys_mbind */
+/* Number 269 is reserved for new sys_get_mempolicy */
+/* Number 270 is reserved for new sys_set_mempolicy */
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_kexec_load		277
+#define __NR_add_key		278
+#define __NR_request_key	279
+#define __NR_keyctl		280
+#define __NR_waitid		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
+/* Number 287 is reserved for new sys_migrate_pages */
+#define __NR_openat		288
+#define __NR_mkdirat		289
+#define __NR_mknodat		290
+#define __NR_fchownat		291
+#define __NR_futimesat		292
+#define __NR_unlinkat		294
+#define __NR_renameat		295
+#define __NR_linkat		296
+#define __NR_symlinkat		297
+#define __NR_readlinkat		298
+#define __NR_fchmodat		299
+#define __NR_faccessat		300
+#define __NR_pselect6		301
+#define __NR_ppoll		302
+#define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
+/* Number 310 is reserved for new sys_move_pages */
+#define __NR_getcpu		311
+#define __NR_epoll_pwait	312
+#define __NR_utimes		313
+#define __NR_fallocate		314
+#define __NR_utimensat		315
+#define __NR_signalfd		316
+#define __NR_timerfd		317
+#define __NR_eventfd		318
+#define __NR_timerfd_create	319
+#define __NR_timerfd_settime	320
+#define __NR_timerfd_gettime	321
+#define __NR_signalfd4		322
+#define __NR_eventfd2		323
+#define __NR_inotify_init1	324
+#define __NR_pipe2		325
+#define __NR_dup3		326
+#define __NR_epoll_create1	327
+#define NR_syscalls 328
+
+/* 
+ * There are some system calls that are not present on 64 bit, some
+ * have a different name although they do the same (e.g. __NR_chown32
+ * is __NR_chown on 64 bit).
+ */
+#ifndef __s390x__
+
+#define __NR_time		 13
+#define __NR_lchown		 16
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_getrlimit		 76
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_fchown		 95
+#define __NR_ioperm		101
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR__newselect 	142
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_chown		182
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_fcntl64		221
+#define __NR_sendfile64		223
+#define __NR_fadvise64_64	264
+#define __NR_fstatat64		293
+
+#else
+
+#define __NR_select		142
+#define __NR_getrlimit		191	/* SuS compliant getrlimit */
+#define __NR_lchown  		198
+#define __NR_getuid  		199
+#define __NR_getgid  		200
+#define __NR_geteuid  		201
+#define __NR_getegid  		202
+#define __NR_setreuid  		203
+#define __NR_setregid  		204
+#define __NR_getgroups  	205
+#define __NR_setgroups  	206
+#define __NR_fchown  		207
+#define __NR_setresuid  	208
+#define __NR_getresuid  	209
+#define __NR_setresgid  	210
+#define __NR_getresgid  	211
+#define __NR_chown  		212
+#define __NR_setuid  		213
+#define __NR_setgid  		214
+#define __NR_setfsuid  		215
+#define __NR_setfsgid  		216
+#define __NR_newfstatat		293
+
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef CONFIG_64BIT
+#define __IGNORE_select
+#else
+#define __IGNORE_time
+#endif
+
+/* Ignore NUMA system calls. Not wired up on s390. */
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+# ifndef CONFIG_64BIT
+#   define __ARCH_WANT_STAT64
+#   define __ARCH_WANT_SYS_TIME
+# endif
+# ifdef CONFIG_COMPAT
+#   define __ARCH_WANT_COMPAT_SYS_TIME
+#   define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+# endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_UNISTD_H_ */
diff --git a/arch/s390/include/asm/user.h b/arch/s390/include/asm/user.h
new file mode 100644
index 00000000000..1b050e35fdc
--- /dev/null
+++ b/arch/s390/include/asm/user.h
@@ -0,0 +1,76 @@
+/*
+ *  include/asm-s390/user.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/usr.h"
+ */
+
+#ifndef _S390_USER_H
+#define _S390_USER_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+
+/*
+ * This is the old layout of "struct pt_regs", and
+ * is still the layout used by user mode (the new
+ * pt_regs doesn't have all registers as the kernel
+ * doesn't use the extra segment registers)
+ */
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;		/* Where the registers are actually stored */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _S390_USER_H */
diff --git a/arch/s390/include/asm/vtoc.h b/arch/s390/include/asm/vtoc.h
new file mode 100644
index 00000000000..3a5267d90d2
--- /dev/null
+++ b/arch/s390/include/asm/vtoc.h
@@ -0,0 +1,203 @@
+/*
+ * include/asm-s390/vtoc.h
+ *
+ * This file contains volume label definitions for DASD devices.
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Author(s): Volker Sameske <sameske@de.ibm.com>
+ *
+ */
+
+#ifndef _ASM_S390_VTOC_H
+#define _ASM_S390_VTOC_H
+
+#include <linux/types.h>
+
+struct vtoc_ttr
+{
+	__u16 tt;
+	__u8 r;
+} __attribute__ ((packed));
+
+struct vtoc_cchhb
+{
+	__u16 cc;
+	__u16 hh;
+	__u8 b;
+} __attribute__ ((packed));
+
+struct vtoc_cchh
+{
+	__u16 cc;
+	__u16 hh;
+} __attribute__ ((packed));
+
+struct vtoc_labeldate
+{
+	__u8 year;
+	__u16 day;
+} __attribute__ ((packed));
+
+struct vtoc_volume_label
+{
+	char volkey[4];		/* volume key = volume label */
+	char vollbl[4];		/* volume label */
+	char volid[6];		/* volume identifier */
+	__u8 security;		/* security byte */
+	struct vtoc_cchhb vtoc;	/* VTOC address */
+	char res1[5];		/* reserved */
+	char cisize[4];		/* CI-size for FBA,... */
+				/* ...blanks for CKD */
+	char blkperci[4];	/* no of blocks per CI (FBA), blanks for CKD */
+	char labperci[4];	/* no of labels per CI (FBA), blanks for CKD */
+	char res2[4];		/* reserved */
+	char lvtoc[14];		/* owner code for LVTOC */
+	char res3[29];		/* reserved */
+} __attribute__ ((packed));
+
+struct vtoc_extent
+{
+	__u8 typeind;			/* extent type indicator */
+	__u8 seqno;			/* extent sequence number */
+	struct vtoc_cchh llimit;	/* starting point of this extent */
+	struct vtoc_cchh ulimit;	/* ending point of this extent */
+} __attribute__ ((packed));
+
+struct vtoc_dev_const
+{
+	__u16 DS4DSCYL;	/* number of logical cyls */
+	__u16 DS4DSTRK;	/* number of tracks in a logical cylinder */
+	__u16 DS4DEVTK;	/* device track length */
+	__u8 DS4DEVI;	/* non-last keyed record overhead */
+	__u8 DS4DEVL;	/* last keyed record overhead */
+	__u8 DS4DEVK;	/* non-keyed record overhead differential */
+	__u8 DS4DEVFG;	/* flag byte */
+	__u16 DS4DEVTL;	/* device tolerance */
+	__u8 DS4DEVDT;	/* number of DSCB's per track */
+	__u8 DS4DEVDB;	/* number of directory blocks per track */
+} __attribute__ ((packed));
+
+struct vtoc_format1_label
+{
+	char DS1DSNAM[44];	/* data set name */
+	__u8 DS1FMTID;		/* format identifier */
+	char DS1DSSN[6];	/* data set serial number */
+	__u16 DS1VOLSQ;		/* volume sequence number */
+	struct vtoc_labeldate DS1CREDT; /* creation date: ydd */
+	struct vtoc_labeldate DS1EXPDT; /* expiration date */
+	__u8 DS1NOEPV;		/* number of extents on volume */
+	__u8 DS1NOBDB;		/* no. of bytes used in last direction blk */
+	__u8 DS1FLAG1;		/* flag 1 */
+	char DS1SYSCD[13];	/* system code */
+	struct vtoc_labeldate DS1REFD; /* date last referenced	*/
+	__u8 DS1SMSFG;		/* system managed storage indicators */
+	__u8 DS1SCXTF;		/* sec. space extension flag byte */
+	__u16 DS1SCXTV;		/* secondary space extension value */
+	__u8 DS1DSRG1;		/* data set organisation byte 1 */
+	__u8 DS1DSRG2;		/* data set organisation byte 2 */
+	__u8 DS1RECFM;		/* record format */
+	__u8 DS1OPTCD;		/* option code */
+	__u16 DS1BLKL;		/* block length */
+	__u16 DS1LRECL;		/* record length */
+	__u8 DS1KEYL;		/* key length */
+	__u16 DS1RKP;		/* relative key position */
+	__u8 DS1DSIND;		/* data set indicators */
+	__u8 DS1SCAL1;		/* secondary allocation flag byte */
+	char DS1SCAL3[3];	/* secondary allocation quantity */
+	struct vtoc_ttr DS1LSTAR; /* last used track and block on track */
+	__u16 DS1TRBAL;		/* space remaining on last used track */
+	__u16 res1;		/* reserved */
+	struct vtoc_extent DS1EXT1; /* first extent description */
+	struct vtoc_extent DS1EXT2; /* second extent description */
+	struct vtoc_extent DS1EXT3; /* third extent description */
+	struct vtoc_cchhb DS1PTRDS; /* possible pointer to f2 or f3 DSCB */
+} __attribute__ ((packed));
+
+struct vtoc_format4_label
+{
+	char DS4KEYCD[44];	/* key code for VTOC labels: 44 times 0x04 */
+	__u8 DS4IDFMT;		/* format identifier */
+	struct vtoc_cchhb DS4HPCHR; /* highest address of a format 1 DSCB */
+	__u16 DS4DSREC;		/* number of available DSCB's */
+	struct vtoc_cchh DS4HCCHH; /* CCHH of next available alternate track */
+	__u16 DS4NOATK;		/* number of remaining alternate tracks */
+	__u8 DS4VTOCI;		/* VTOC indicators */
+	__u8 DS4NOEXT;		/* number of extents in VTOC */
+	__u8 DS4SMSFG;		/* system managed storage indicators */
+	__u8 DS4DEVAC;		/* number of alternate cylinders.
+				 * Subtract from first two bytes of
+				 * DS4DEVSZ to get number of usable
+				 * cylinders. can be zero. valid
+				 * only if DS4DEVAV on. */
+	struct vtoc_dev_const DS4DEVCT;	/* device constants */
+	char DS4AMTIM[8];	/* VSAM time stamp */
+	char DS4AMCAT[3];	/* VSAM catalog indicator */
+	char DS4R2TIM[8];	/* VSAM volume/catalog match time stamp */
+	char res1[5];		/* reserved */
+	char DS4F6PTR[5];	/* pointer to first format 6 DSCB */
+	struct vtoc_extent DS4VTOCE; /* VTOC extent description */
+	char res2[10];		/* reserved */
+	__u8 DS4EFLVL;		/* extended free-space management level */
+	struct vtoc_cchhb DS4EFPTR; /* pointer to extended free-space info */
+	char res3[9];		/* reserved */
+} __attribute__ ((packed));
+
+struct vtoc_ds5ext
+{
+	__u16 t;	/* RTA of the first track of free extent */
+	__u16 fc;	/* number of whole cylinders in free ext. */
+	__u8 ft;	/* number of remaining free tracks */
+} __attribute__ ((packed));
+
+struct vtoc_format5_label
+{
+	char DS5KEYID[4];	/* key identifier */
+	struct vtoc_ds5ext DS5AVEXT; /* first available (free-space) extent. */
+	struct vtoc_ds5ext DS5EXTAV[7]; /* seven available extents */
+	__u8 DS5FMTID;		/* format identifier */
+	struct vtoc_ds5ext DS5MAVET[18]; /* eighteen available extents */
+	struct vtoc_cchhb DS5PTRDS; /* pointer to next format5 DSCB */
+} __attribute__ ((packed));
+
+struct vtoc_ds7ext
+{
+	__u32 a; /* starting RTA value */
+	__u32 b; /* ending RTA value + 1 */
+} __attribute__ ((packed));
+
+struct vtoc_format7_label
+{
+	char DS7KEYID[4];	/* key identifier */
+	struct vtoc_ds7ext DS7EXTNT[5]; /* space for 5 extent descriptions */
+	__u8 DS7FMTID;		/* format identifier */
+	struct vtoc_ds7ext DS7ADEXT[11]; /* space for 11 extent descriptions */
+	char res1[2];		/* reserved */
+	struct vtoc_cchhb DS7PTRDS; /* pointer to next FMT7 DSCB */
+} __attribute__ ((packed));
+
+struct vtoc_cms_label {
+	__u8 label_id[4];		/* Label identifier */
+	__u8 vol_id[6];		/* Volid */
+	__u16 version_id;		/* Version identifier */
+	__u32 block_size;		/* Disk block size */
+	__u32 origin_ptr;		/* Disk origin pointer */
+	__u32 usable_count;	/* Number of usable cylinders/blocks */
+	__u32 formatted_count;	/* Maximum number of formatted cylinders/
+				 * blocks */
+	__u32 block_count;	/* Disk size in CMS blocks */
+	__u32 used_count;		/* Number of CMS blocks in use */
+	__u32 fst_size;		/* File Status Table (FST) size */
+	__u32 fst_count;		/* Number of FSTs per CMS block */
+	__u8 format_date[6];	/* Disk FORMAT date */
+	__u8 reserved1[2];
+	__u32 disk_offset;	/* Disk offset when reserved*/
+	__u32 map_block;		/* Allocation Map Block with next hole */
+	__u32 hblk_disp;		/* Displacement into HBLK data of next hole */
+	__u32 user_disp;		/* Displacement into user part of Allocation
+				 * map */
+	__u8 reserved2[4];
+	__u8 segment_name[8];	/* Name of shared segment */
+} __attribute__ ((packed));
+
+#endif /* _ASM_S390_VTOC_H */
diff --git a/arch/s390/include/asm/xor.h b/arch/s390/include/asm/xor.h
new file mode 100644
index 00000000000..c82eb12a5b1
--- /dev/null
+++ b/arch/s390/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/s390/include/asm/zcrypt.h b/arch/s390/include/asm/zcrypt.h
new file mode 100644
index 00000000000..00d3bbd4411
--- /dev/null
+++ b/arch/s390/include/asm/zcrypt.h
@@ -0,0 +1,276 @@
+/*
+ *  include/asm-s390/zcrypt.h
+ *
+ *  zcrypt 2.1.0 (user-visible header)
+ *
+ *  Copyright (C)  2001, 2006 IBM Corporation
+ *  Author(s): Robert Burroughs
+ *	       Eric Rossman (edrossma@us.ibm.com)
+ *
+ *  Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_S390_ZCRYPT_H
+#define __ASM_S390_ZCRYPT_H
+
+#define ZCRYPT_VERSION 2
+#define ZCRYPT_RELEASE 1
+#define ZCRYPT_VARIANT 1
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/**
+ * struct ica_rsa_modexpo
+ *
+ * Requirements:
+ * - outputdatalength is at least as large as inputdatalength.
+ * - All key parts are right justified in their fields, padded on
+ *   the left with zeroes.
+ * - length(b_key) = inputdatalength
+ * - length(n_modulus) = inputdatalength
+ */
+struct ica_rsa_modexpo {
+	char __user *	inputdata;
+	unsigned int	inputdatalength;
+	char __user *	outputdata;
+	unsigned int	outputdatalength;
+	char __user *	b_key;
+	char __user *	n_modulus;
+};
+
+/**
+ * struct ica_rsa_modexpo_crt
+ *
+ * Requirements:
+ * - inputdatalength is even.
+ * - outputdatalength is at least as large as inputdatalength.
+ * - All key parts are right justified in their fields, padded on
+ *   the left with zeroes.
+ * - length(bp_key)	= inputdatalength/2 + 8
+ * - length(bq_key)	= inputdatalength/2
+ * - length(np_key)	= inputdatalength/2 + 8
+ * - length(nq_key)	= inputdatalength/2
+ * - length(u_mult_inv) = inputdatalength/2 + 8
+ */
+struct ica_rsa_modexpo_crt {
+	char __user *	inputdata;
+	unsigned int	inputdatalength;
+	char __user *	outputdata;
+	unsigned int	outputdatalength;
+	char __user *	bp_key;
+	char __user *	bq_key;
+	char __user *	np_prime;
+	char __user *	nq_prime;
+	char __user *	u_mult_inv;
+};
+
+/**
+ * CPRBX
+ *	  Note that all shorts and ints are big-endian.
+ *	  All pointer fields are 16 bytes long, and mean nothing.
+ *
+ *	  A request CPRB is followed by a request_parameter_block.
+ *
+ *	  The request (or reply) parameter block is organized thus:
+ *	    function code
+ *	    VUD block
+ *	    key block
+ */
+struct CPRBX {
+	unsigned short	cprb_len;	/* CPRB length	      220	 */
+	unsigned char	cprb_ver_id;	/* CPRB version id.   0x02	 */
+	unsigned char	pad_000[3];	/* Alignment pad bytes		 */
+	unsigned char	func_id[2];	/* function id	      0x5432	 */
+	unsigned char	cprb_flags[4];	/* Flags			 */
+	unsigned int	req_parml;	/* request parameter buffer len	 */
+	unsigned int	req_datal;	/* request data buffer		 */
+	unsigned int	rpl_msgbl;	/* reply  message block length	 */
+	unsigned int	rpld_parml;	/* replied parameter block len	 */
+	unsigned int	rpl_datal;	/* reply data block len		 */
+	unsigned int	rpld_datal;	/* replied data block len	 */
+	unsigned int	req_extbl;	/* request extension block len	 */
+	unsigned char	pad_001[4];	/* reserved			 */
+	unsigned int	rpld_extbl;	/* replied extension block len	 */
+	unsigned char	padx000[16 - sizeof (char *)];
+	unsigned char *	req_parmb;	/* request parm block 'address'	 */
+	unsigned char	padx001[16 - sizeof (char *)];
+	unsigned char *	req_datab;	/* request data block 'address'	 */
+	unsigned char	padx002[16 - sizeof (char *)];
+	unsigned char *	rpl_parmb;	/* reply parm block 'address'	 */
+	unsigned char	padx003[16 - sizeof (char *)];
+	unsigned char *	rpl_datab;	/* reply data block 'address'	 */
+	unsigned char	padx004[16 - sizeof (char *)];
+	unsigned char *	req_extb;	/* request extension block 'addr'*/
+	unsigned char	padx005[16 - sizeof (char *)];
+	unsigned char *	rpl_extb;	/* reply extension block 'address'*/
+	unsigned short	ccp_rtcode;	/* server return code		 */
+	unsigned short	ccp_rscode;	/* server reason code		 */
+	unsigned int	mac_data_len;	/* Mac Data Length		 */
+	unsigned char	logon_id[8];	/* Logon Identifier		 */
+	unsigned char	mac_value[8];	/* Mac Value			 */
+	unsigned char	mac_content_flgs;/* Mac content flag byte	 */
+	unsigned char	pad_002;	/* Alignment			 */
+	unsigned short	domain;		/* Domain			 */
+	unsigned char	usage_domain[4];/* Usage domain			 */
+	unsigned char	cntrl_domain[4];/* Control domain		 */
+	unsigned char	S390enf_mask[4];/* S/390 enforcement mask	 */
+	unsigned char	pad_004[36];	/* reserved			 */
+} __attribute__((packed));
+
+/**
+ * xcRB
+ */
+struct ica_xcRB {
+	unsigned short	agent_ID;
+	unsigned int	user_defined;
+	unsigned short	request_ID;
+	unsigned int	request_control_blk_length;
+	unsigned char	padding1[16 - sizeof (char *)];
+	char __user *	request_control_blk_addr;
+	unsigned int	request_data_length;
+	char		padding2[16 - sizeof (char *)];
+	char __user *	request_data_address;
+	unsigned int	reply_control_blk_length;
+	char		padding3[16 - sizeof (char *)];
+	char __user *	reply_control_blk_addr;
+	unsigned int	reply_data_length;
+	char		padding4[16 - sizeof (char *)];
+	char __user *	reply_data_addr;
+	unsigned short	priority_window;
+	unsigned int	status;
+} __attribute__((packed));
+#define AUTOSELECT ((unsigned int)0xFFFFFFFF)
+
+#define ZCRYPT_IOCTL_MAGIC 'z'
+
+/**
+ * Interface notes:
+ *
+ * The ioctl()s which are implemented (along with relevant details)
+ * are:
+ *
+ *   ICARSAMODEXPO
+ *     Perform an RSA operation using a Modulus-Exponent pair
+ *     This takes an ica_rsa_modexpo struct as its arg.
+ *
+ *     NOTE: please refer to the comments preceding this structure
+ *	     for the implementation details for the contents of the
+ *	     block
+ *
+ *   ICARSACRT
+ *     Perform an RSA operation using a Chinese-Remainder Theorem key
+ *     This takes an ica_rsa_modexpo_crt struct as its arg.
+ *
+ *     NOTE: please refer to the comments preceding this structure
+ *	     for the implementation details for the contents of the
+ *	     block
+ *
+ *   ZSECSENDCPRB
+ *     Send an arbitrary CPRB to a crypto card.
+ *
+ *   Z90STAT_STATUS_MASK
+ *     Return an 64 element array of unsigned chars for the status of
+ *     all devices.
+ *	 0x01: PCICA
+ *	 0x02: PCICC
+ *	 0x03: PCIXCC_MCL2
+ *	 0x04: PCIXCC_MCL3
+ *	 0x05: CEX2C
+ *	 0x06: CEX2A
+ *	 0x0d: device is disabled via the proc filesystem
+ *
+ *   Z90STAT_QDEPTH_MASK
+ *     Return an 64 element array of unsigned chars for the queue
+ *     depth of all devices.
+ *
+ *   Z90STAT_PERDEV_REQCNT
+ *     Return an 64 element array of unsigned integers for the number
+ *     of successfully completed requests per device since the device
+ *     was detected and made available.
+ *
+ *   Z90STAT_REQUESTQ_COUNT
+ *     Return an integer count of the number of entries waiting to be
+ *     sent to a device.
+ *
+ *   Z90STAT_PENDINGQ_COUNT
+ *     Return an integer count of the number of entries sent to all
+ *     devices awaiting the reply.
+ *
+ *   Z90STAT_TOTALOPEN_COUNT
+ *     Return an integer count of the number of open file handles.
+ *
+ *   Z90STAT_DOMAIN_INDEX
+ *     Return the integer value of the Cryptographic Domain.
+ *
+ *   The following ioctls are deprecated and should be no longer used:
+ *
+ *   Z90STAT_TOTALCOUNT
+ *     Return an integer count of all device types together.
+ *
+ *   Z90STAT_PCICACOUNT
+ *     Return an integer count of all PCICAs.
+ *
+ *   Z90STAT_PCICCCOUNT
+ *     Return an integer count of all PCICCs.
+ *
+ *   Z90STAT_PCIXCCMCL2COUNT
+ *     Return an integer count of all MCL2 PCIXCCs.
+ *
+ *   Z90STAT_PCIXCCMCL3COUNT
+ *     Return an integer count of all MCL3 PCIXCCs.
+ *
+ *   Z90STAT_CEX2CCOUNT
+ *     Return an integer count of all CEX2Cs.
+ *
+ *   Z90STAT_CEX2ACOUNT
+ *     Return an integer count of all CEX2As.
+ *
+ *   ICAZ90STATUS
+ *     Return some device driver status in a ica_z90_status struct
+ *     This takes an ica_z90_status struct as its arg.
+ *
+ *   Z90STAT_PCIXCCCOUNT
+ *     Return an integer count of all PCIXCCs (MCL2 + MCL3).
+ *     This is DEPRECATED now that MCL3 PCIXCCs are treated differently from
+ *     MCL2 PCIXCCs.
+ */
+
+/**
+ * Supported ioctl calls
+ */
+#define ICARSAMODEXPO	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x05, 0)
+#define ICARSACRT	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x06, 0)
+#define ZSECSENDCPRB	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x81, 0)
+
+/* New status calls */
+#define Z90STAT_TOTALCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x40, int)
+#define Z90STAT_PCICACOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x41, int)
+#define Z90STAT_PCICCCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x42, int)
+#define Z90STAT_PCIXCCMCL2COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4b, int)
+#define Z90STAT_PCIXCCMCL3COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4c, int)
+#define Z90STAT_CEX2CCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4d, int)
+#define Z90STAT_CEX2ACOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4e, int)
+#define Z90STAT_REQUESTQ_COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x44, int)
+#define Z90STAT_PENDINGQ_COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x45, int)
+#define Z90STAT_TOTALOPEN_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x46, int)
+#define Z90STAT_DOMAIN_INDEX	_IOR(ZCRYPT_IOCTL_MAGIC, 0x47, int)
+#define Z90STAT_STATUS_MASK	_IOR(ZCRYPT_IOCTL_MAGIC, 0x48, char[64])
+#define Z90STAT_QDEPTH_MASK	_IOR(ZCRYPT_IOCTL_MAGIC, 0x49, char[64])
+#define Z90STAT_PERDEV_REQCNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4a, int[64])
+
+#endif /* __ASM_S390_ZCRYPT_H */
diff --git a/arch/s390/kernel/compat_ptrace.h b/arch/s390/kernel/compat_ptrace.h
index cde81fa64f8..a2be3a978d5 100644
--- a/arch/s390/kernel/compat_ptrace.h
+++ b/arch/s390/kernel/compat_ptrace.h
@@ -42,6 +42,7 @@ struct user_regs_struct32
 	u32 gprs[NUM_GPRS];
 	u32 acrs[NUM_ACRS];
 	u32 orig_gpr2;
+	/* nb: there's a 4-byte hole here */
 	s390_fp_regs fp_regs;
 	/*
 	 * These per registers are in here so that gdb can modify them
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index d003a6e16af..328a20e880b 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper:
 	lgfr	%r2,%r2			# int
 	llgtr	%r3,%r3			# struct compat_itimerspec *
 	jg	compat_sys_timerfd_gettime
+
+	.globl compat_sys_signalfd4_wrapper
+compat_sys_signalfd4_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_sigset_t *
+	llgfr	%r4,%r4			# compat_size_t
+	lgfr	%r5,%r5			# int
+	jg	compat_sys_signalfd4
+
+	.globl sys_eventfd2_wrapper
+sys_eventfd2_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	lgfr	%r3,%r3			# int
+	jg	sys_eventfd2
+
+	.globl	sys_inotify_init1_wrapper
+sys_inotify_init1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_inotify_init1
+
+	.globl	sys_pipe2_wrapper
+sys_pipe2_wrapper:
+	llgtr	%r2,%r2			# u32 *
+	lgfr	%r3,%r3			# int
+	jg	sys_pipe2		# branch to system call
+
+	.globl	sys_dup3_wrapper
+sys_dup3_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	llgfr	%r3,%r3			# unsigned int
+	lgfr	%r4,%r4			# int
+	jg	sys_dup3		# branch to system call
+
+	.globl	sys_epoll_create1_wrapper
+sys_epoll_create1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_epoll_create1	# branch to system call
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 54b2779b5e2..2dcf590faba 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1705,7 +1705,10 @@ void __init setup_ipl(void)
 
 void __init ipl_update_parameters(void)
 {
-	if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+	int rc;
+
+	rc = diag308(DIAG308_STORE, &ipl_block);
+	if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG))
 		diag308_set_works = 1;
 }
 
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 288ad490a6d..569079ec4ff 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -197,7 +197,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	args.new = BREAKPOINT_INSTRUCTION;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	stop_machine_run(swap_instruction, &args, NR_CPUS);
+	stop_machine(swap_instruction, &args, NULL);
 	kcb->kprobe_status = status;
 }
 
@@ -212,7 +212,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 	args.new = p->opcode;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	stop_machine_run(swap_instruction, &args, NR_CPUS);
+	stop_machine(swap_instruction, &args, NULL);
 	kcb->kprobe_status = status;
 }
 
@@ -270,7 +270,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 					struct pt_regs *regs)
 {
@@ -332,7 +331,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		 * No kprobe at this address. The fault has not been
 		 * caused by a kprobe breakpoint. The race of breakpoint
 		 * vs. kprobe remove does not exist because on s390 we
-		 * use stop_machine_run to arm/disarm the breakpoints.
+		 * use stop_machine to arm/disarm the breakpoints.
 		 */
 		goto no_kprobe;
 
@@ -377,8 +376,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -417,7 +415,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 18ed7abe16c..9872999c66d 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -9,27 +9,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-static int memory_fast_detect(struct mem_chunk *chunk)
-{
-	unsigned long val0 = 0;
-	unsigned long val1 = 0xc;
-	int rc = -EOPNOTSUPP;
-
-	if (ipl_flags & IPL_NSS_VALID)
-		return -EOPNOTSUPP;
-	asm volatile(
-		"	diag	%1,%2,0x260\n"
-		"0:	lhi	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
-
-	if (rc || val0 != val1)
-		return -EOPNOTSUPP;
-	chunk->size = val0 + 1;
-	return 0;
-}
-
 static inline int tprot(unsigned long addr)
 {
 	int rc = -EFAULT;
@@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[])
 	unsigned long flags, cr0;
 
 	memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
-	if (memory_fast_detect(&chunk[0]) == 0)
-		return;
 	/* Disable IRQs, DAT and low address protection so tprot does the
 	 * right thing and we don't get scheduled away with low address
 	 * protection disabled.
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 85defd01d29..3e2c05cb6a8 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -75,7 +75,9 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return sf->gprs[8];
 }
 
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = {
+	.lock = __SPIN_LOCK_UNLOCKED(s390_idle.lock)
+};
 
 static int s390_idle_enter(void)
 {
@@ -142,7 +144,7 @@ static void default_idle(void)
 void cpu_idle(void)
 {
 	for (;;) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			default_idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 2815bfe348a..c8b08289eb8 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -170,6 +170,13 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 		 */
 		tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/* 
 		 * floating point regs. are stored in the thread structure
@@ -270,6 +277,13 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 */
 		task_pt_regs(child)->orig_gpr2 = data;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent writes of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure
@@ -428,6 +442,13 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 		 */
 		tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 
@@ -514,6 +535,13 @@ static int __poke_user_compat(struct task_struct *child,
 		 */
 		*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent writess of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index b358e18273b..62122bad1e3 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -54,6 +54,7 @@
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
 #include <asm/compat.h>
+#include <asm/kvm_virtio.h>
 
 long psw_kernel_bits	= (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
 			   PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
@@ -766,7 +767,8 @@ setup_arch(char **cmdline_p)
 		printk("We are running under VM (64 bit mode)\n");
 	else if (MACHINE_IS_KVM) {
 		printk("We are running under KVM (64 bit mode)\n");
-		add_preferred_console("ttyS", 1, NULL);
+		add_preferred_console("hvc", 0, NULL);
+		s390_virtio_console_init();
 	} else
 		printk("We are running native (64 bit mode)\n");
 #endif /* CONFIG_64BIT */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index b6781030cfb..00b9b4dec5e 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -610,7 +610,6 @@ static void __init smp_create_idle(unsigned int cpu)
 	if (IS_ERR(p))
 		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
 	current_set[cpu] = p;
-	spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock);
 }
 
 static int __cpuinit smp_alloc_lowcore(int cpu)
@@ -845,7 +844,6 @@ void __init smp_prepare_boot_cpu(void)
 	current_set[0] = current;
 	smp_cpu_state[0] = CPU_STATE_CONFIGURED;
 	smp_cpu_polarization[0] = POLARIZATION_UNKNWN;
-	spin_lock_init(&(&__get_cpu_var(s390_idle))->lock);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -864,7 +862,8 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_configure_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t count;
 
@@ -874,8 +873,9 @@ static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
 	return count;
 }
 
-static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf,
-				   size_t count)
+static ssize_t cpu_configure_store(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  const char *buf, size_t count)
 {
 	int cpu = dev->id;
 	int val, rc;
@@ -922,7 +922,8 @@ out:
 static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_polarization_show(struct sys_device *dev,
+				     struct sysdev_attribute *attr, char *buf)
 {
 	int cpu = dev->id;
 	ssize_t count;
@@ -950,7 +951,8 @@ static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
 
-static ssize_t show_cpu_address(struct sys_device *dev, char *buf)
+static ssize_t show_cpu_address(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
 }
@@ -970,7 +972,8 @@ static struct attribute_group cpu_common_attr_group = {
 	.attrs = cpu_common_attrs,
 };
 
-static ssize_t show_capability(struct sys_device *dev, char *buf)
+static ssize_t show_capability(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned int capability;
 	int rc;
@@ -982,7 +985,8 @@ static ssize_t show_capability(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(capability, 0444, show_capability, NULL);
 
-static ssize_t show_idle_count(struct sys_device *dev, char *buf)
+static ssize_t show_idle_count(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long idle_count;
@@ -995,7 +999,8 @@ static ssize_t show_idle_count(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL);
 
-static ssize_t show_idle_time(struct sys_device *dev, char *buf)
+static ssize_t show_idle_time(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long new_time;
@@ -1112,7 +1117,9 @@ out:
 	return rc;
 }
 
-static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
+static ssize_t __ref rescan_store(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  const char *buf,
 				  size_t count)
 {
 	int rc;
@@ -1123,7 +1130,9 @@ static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
 static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sys_device *dev, char *buf)
+static ssize_t dispatching_show(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				char *buf)
 {
 	ssize_t count;
 
@@ -1133,8 +1142,9 @@ static ssize_t dispatching_show(struct sys_device *dev, char *buf)
 	return count;
 }
 
-static ssize_t dispatching_store(struct sys_device *dev, const char *buf,
-				 size_t count)
+static ssize_t dispatching_store(struct sys_device *dev,
+				 struct sysdev_attribute *attr,
+				 const char *buf, size_t count)
 {
 	int val, rc;
 	char delim;
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index c87ec687d4c..c66d35e5514 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper)
 SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper)
 SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */
 SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper)
+SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper)
+SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper)
+SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
+SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
+SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
+SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index f2cede3947b..ca114fe46ff 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1100,7 +1100,9 @@ static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
 		return etr_port1_online ? &etr_port1 : NULL;
 }
 
-static ssize_t etr_online_show(struct sys_device *dev, char *buf)
+static ssize_t etr_online_show(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				char *buf)
 {
 	unsigned int online;
 
@@ -1109,7 +1111,8 @@ static ssize_t etr_online_show(struct sys_device *dev, char *buf)
 }
 
 static ssize_t etr_online_store(struct sys_device *dev,
-			      const char *buf, size_t count)
+				struct sysdev_attribute *attr,
+				const char *buf, size_t count)
 {
 	unsigned int value;
 
@@ -1136,7 +1139,9 @@ static ssize_t etr_online_store(struct sys_device *dev,
 
 static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
 
-static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
+static ssize_t etr_stepping_control_show(struct sys_device *dev,
+					struct sysdev_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
 		       etr_eacr.e0 : etr_eacr.e1);
@@ -1144,7 +1149,8 @@ static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
 
-static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
+static ssize_t etr_mode_code_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	if (!etr_port0_online && !etr_port1_online)
 		/* Status word is not uptodate if both ports are offline. */
@@ -1155,7 +1161,8 @@ static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
 
-static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
+static ssize_t etr_untuned_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1166,7 +1173,8 @@ static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
 
-static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_network_id_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1177,7 +1185,8 @@ static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
 
-static ssize_t etr_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_id_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1188,7 +1197,8 @@ static ssize_t etr_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
 
-static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
+static ssize_t etr_port_number_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1199,7 +1209,8 @@ static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
 
-static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
+static ssize_t etr_coupled_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1210,7 +1221,8 @@ static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
 
-static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
+static ssize_t etr_local_time_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1221,7 +1233,8 @@ static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
 
-static ssize_t etr_utc_offset_show(struct sys_device *dev, char *buf)
+static ssize_t etr_utc_offset_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1335,7 +1348,7 @@ early_param("stp", early_parse_stp);
 /*
  * Reset STP attachment.
  */
-static void stp_reset(void)
+static void __init stp_reset(void)
 {
 	int rc;
 
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 212d618b009..632b13e1005 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -9,7 +9,6 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/sched.h>
-#include <linux/kthread.h>
 #include <linux/workqueue.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
@@ -230,20 +229,9 @@ void arch_update_cpu_topology(void)
 	}
 }
 
-static int topology_kthread(void *data)
-{
-	arch_reinit_sched_domains();
-	return 0;
-}
-
 static void topology_work_fn(struct work_struct *work)
 {
-	/* We can't call arch_reinit_sched_domains() from a multi-threaded
-	 * workqueue context since it may deadlock in case of cpu hotplug.
-	 * So we have to create a kernel thread in order to call
-	 * arch_reinit_sched_domains().
-	 */
-	kthread_run(topology_kthread, NULL, "topology_update");
+	arch_reinit_sched_domains();
 }
 
 void topology_schedule_update(void)
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 76c1e60c92f..607bd67a18c 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -55,7 +55,7 @@ SECTIONS
 		__start___ex_table = .;
 		*(__ex_table)
 		__stop___ex_table = .;
-	}
+	} :data
 
 	.data : {		/* Data */
 		DATA_DATA
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index 4e0633c413f..ed60f3a74a8 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -18,11 +18,11 @@
 #include <asm/uaccess.h>
 
 static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
-					       u64 guestaddr)
+					       unsigned long guestaddr)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestaddr < 2 * PAGE_SIZE)
 		guestaddr += prefix;
@@ -37,7 +37,7 @@ static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
 	return (void __user *) guestaddr;
 }
 
-static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u64 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -47,10 +47,10 @@ static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
 	if (IS_ERR((void __force *) uptr))
 		return PTR_ERR((void __force *) uptr);
 
-	return get_user(*result, (u64 __user *) uptr);
+	return get_user(*result, (unsigned long __user *) uptr);
 }
 
-static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u32 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -63,7 +63,7 @@ static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u32 __user *) uptr);
 }
 
-static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u16 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -76,7 +76,7 @@ static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u16 __user *) uptr);
 }
 
-static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 			       u8 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -87,7 +87,7 @@ static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u8 __user *) uptr);
 }
 
-static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u64 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -100,7 +100,7 @@ static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u64 __user *) uptr);
 }
 
-static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u32 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -113,7 +113,7 @@ static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u32 __user *) uptr);
 }
 
-static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u16 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -126,7 +126,7 @@ static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u16 __user *) uptr);
 }
 
-static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 			       u8 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -138,7 +138,8 @@ static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 }
 
 
-static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu,
+				       unsigned long guestdest,
 				       const void *from, unsigned long n)
 {
 	int rc;
@@ -153,12 +154,12 @@ static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
 	return 0;
 }
 
-static inline int copy_to_guest(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest,
 				const void *from, unsigned long n)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -189,7 +190,8 @@ slowpath:
 }
 
 static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
-					 u64 guestsrc, unsigned long n)
+					 unsigned long guestsrc,
+					 unsigned long n)
 {
 	int rc;
 	unsigned long i;
@@ -204,11 +206,11 @@ static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
 }
 
 static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to,
-				  u64 guestsrc, unsigned long n)
+				  unsigned long guestsrc, unsigned long n)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -238,11 +240,12 @@ slowpath:
 	return __copy_from_guest_slow(vcpu, to, guestsrc, n);
 }
 
-static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu,
+					 unsigned long guestdest,
 					 const void *from, unsigned long n)
 {
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestdest + n > memsize)
 		return -EFAULT;
@@ -256,10 +259,11 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
 }
 
 static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to,
-					   u64 guestsrc, unsigned long n)
+					   unsigned long guestsrc,
+					   unsigned long n)
 {
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestsrc + n > memsize)
 		return -EFAULT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 47a0b642174..61236102203 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -20,7 +20,7 @@
 #include "kvm-s390.h"
 #include "gaccess.h"
 
-static int handle_lctg(struct kvm_vcpu *vcpu)
+static int handle_lctlg(struct kvm_vcpu *vcpu)
 {
 	int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
 	int reg3 = vcpu->arch.sie_block->ipa & 0x000f;
@@ -30,7 +30,7 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
 	u64 useraddr;
 	int reg, rc;
 
-	vcpu->stat.instruction_lctg++;
+	vcpu->stat.instruction_lctlg++;
 	if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f)
 		return -ENOTSUPP;
 
@@ -38,9 +38,12 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
 	if (base2)
 		useraddr += vcpu->arch.guest_gprs[base2];
 
+	if (useraddr & 7)
+		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
 	reg = reg1;
 
-	VCPU_EVENT(vcpu, 5, "lctg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
+	VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
 
 	do {
@@ -74,6 +77,9 @@ static int handle_lctl(struct kvm_vcpu *vcpu)
 	if (base2)
 		useraddr += vcpu->arch.guest_gprs[base2];
 
+	if (useraddr & 3)
+		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
 	VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
 
@@ -99,7 +105,7 @@ static intercept_handler_t instruction_handlers[256] = {
 	[0xae] = kvm_s390_handle_sigp,
 	[0xb2] = kvm_s390_handle_priv,
 	[0xb7] = handle_lctl,
-	[0xeb] = handle_lctg,
+	[0xeb] = handle_lctlg,
 };
 
 static int handle_noop(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 84a7fed4cd4..2960702b482 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -13,6 +13,7 @@
 #include <asm/lowcore.h>
 #include <asm/uaccess.h>
 #include <linux/kvm_host.h>
+#include <linux/signal.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -31,7 +32,7 @@ static int psw_interrupts_disabled(struct kvm_vcpu *vcpu)
 }
 
 static int __interrupt_is_deliverable(struct kvm_vcpu *vcpu,
-				      struct interrupt_info *inti)
+				      struct kvm_s390_interrupt_info *inti)
 {
 	switch (inti->type) {
 	case KVM_S390_INT_EMERGENCY:
@@ -91,7 +92,7 @@ static void __set_cpuflag(struct kvm_vcpu *vcpu, u32 flag)
 }
 
 static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
-				      struct interrupt_info *inti)
+				      struct kvm_s390_interrupt_info *inti)
 {
 	switch (inti->type) {
 	case KVM_S390_INT_EMERGENCY:
@@ -111,7 +112,7 @@ static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
 }
 
 static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
-				   struct interrupt_info *inti)
+				   struct kvm_s390_interrupt_info *inti)
 {
 	const unsigned short table[] = { 2, 4, 4, 6 };
 	int rc, exception = 0;
@@ -246,15 +247,10 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 	default:
 		BUG();
 	}
-
 	if (exception) {
-		VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering"
-			   " interrupt");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-		if (inti->type == KVM_S390_PROGRAM_INT) {
-			printk(KERN_WARNING "kvm: recursive program check\n");
-			BUG();
-		}
+		printk("kvm: The guest lowcore is not mapped during interrupt "
+			"delivery, killing userspace\n");
+		do_exit(SIGKILL);
 	}
 }
 
@@ -277,22 +273,19 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
 		__LC_EXT_NEW_PSW, sizeof(psw_t));
 	if (rc == -EFAULT)
 		exception = 1;
-
 	if (exception) {
-		VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" \
-			   " ckc interrupt");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-		return 0;
+		printk("kvm: The guest lowcore is not mapped during interrupt "
+			"delivery, killing userspace\n");
+		do_exit(SIGKILL);
 	}
-
 	return 1;
 }
 
 int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct float_interrupt *fi = vcpu->arch.local_int.float_int;
-	struct interrupt_info  *inti;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
+	struct kvm_s390_interrupt_info  *inti;
 	int rc = 0;
 
 	if (atomic_read(&li->active)) {
@@ -408,9 +401,9 @@ void kvm_s390_idle_wakeup(unsigned long data)
 
 void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct float_interrupt *fi = vcpu->arch.local_int.float_int;
-	struct interrupt_info  *n, *inti = NULL;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
+	struct kvm_s390_interrupt_info  *n, *inti = NULL;
 	int deliver;
 
 	__reset_intercept_indicators(vcpu);
@@ -465,8 +458,8 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_interrupt_info *inti;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
 	if (!inti)
@@ -487,9 +480,9 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 int kvm_s390_inject_vm(struct kvm *kvm,
 		       struct kvm_s390_interrupt *s390int)
 {
-	struct local_interrupt *li;
-	struct float_interrupt *fi;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_float_interrupt *fi;
+	struct kvm_s390_interrupt_info *inti;
 	int sigcpu;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
@@ -544,8 +537,8 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 			 struct kvm_s390_interrupt *s390int)
 {
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
 	if (!inti)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 6558b09ff57..8b00eb2ddf5 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -39,7 +39,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "exit_instruction", VCPU_STAT(exit_instruction) },
 	{ "exit_program_interruption", VCPU_STAT(exit_program_interruption) },
 	{ "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) },
-	{ "instruction_lctg", VCPU_STAT(instruction_lctg) },
+	{ "instruction_lctlg", VCPU_STAT(instruction_lctlg) },
 	{ "instruction_lctl", VCPU_STAT(instruction_lctl) },
 	{ "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) },
 	{ "deliver_service_signal", VCPU_STAT(deliver_service_signal) },
@@ -79,10 +79,6 @@ void kvm_arch_hardware_disable(void *garbage)
 {
 }
 
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 int kvm_arch_hardware_setup(void)
 {
 	return 0;
@@ -116,7 +112,12 @@ long kvm_arch_dev_ioctl(struct file *filp,
 
 int kvm_dev_ioctl_check_extension(long ext)
 {
-	return 0;
+	switch (ext) {
+	case KVM_CAP_USER_MEMORY:
+		return 1;
+	default:
+		return 0;
+	}
 }
 
 /* Section: vm related */
@@ -198,6 +199,7 @@ out_nokvm:
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	debug_unregister(kvm->arch.dbf);
+	kvm_free_physmem(kvm);
 	free_page((unsigned long)(kvm->arch.sca));
 	kfree(kvm);
 	module_put(THIS_MODULE);
@@ -250,11 +252,16 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gbea = 1;
 }
 
+/* The current code can have up to 256 pages for virtio */
+#define VIRTIODESCSPACE (256ul * 4096ul)
+
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH);
-	vcpu->arch.sie_block->gmslm = 0xffffffffffUL;
-	vcpu->arch.sie_block->gmsor = 0x000000000000;
+	vcpu->arch.sie_block->gmslm = vcpu->kvm->arch.guest_memsize +
+				      vcpu->kvm->arch.guest_origin +
+				      VIRTIODESCSPACE - 1ul;
+	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	setup_timer(&vcpu->arch.ckc_timer, kvm_s390_idle_wakeup,
@@ -273,7 +280,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	if (!vcpu)
 		goto out_nomem;
 
-	vcpu->arch.sie_block = (struct sie_block *) get_zeroed_page(GFP_KERNEL);
+	vcpu->arch.sie_block = (struct kvm_s390_sie_block *)
+					get_zeroed_page(GFP_KERNEL);
 
 	if (!vcpu->arch.sie_block)
 		goto out_free_cpu;
@@ -672,6 +680,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
+
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 {
 	return gfn;
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index c02286c6a93..d1faf5c5440 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,6 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.instruction_stfl++;
 	facility_list &= ~(1UL<<24); /* no stfle */
+	facility_list &= ~(1UL<<23); /* no large pages */
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
@@ -199,7 +200,7 @@ out:
 
 static void handle_stsi_3_2_2(struct kvm_vcpu *vcpu, struct sysinfo_3_2_2 *mem)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	int cpus = 0;
 	int n;
 
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 0a236acfb5f..170392687ce 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -43,9 +43,10 @@
 #define SIGP_STAT_RECEIVER_CHECK    0x00000001UL
 
 
-static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
+static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
+			unsigned long *reg)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -71,9 +72,9 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
 
 static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -108,9 +109,9 @@ unlock:
 
 static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -167,11 +168,11 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 }
 
 static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
-			     u64 *reg)
+			     unsigned long *reg)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 	u8 tmp;
 
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index eae21a8ac72..fc6ab6094df 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -43,7 +43,7 @@ void __udelay(unsigned long usecs)
 		local_bh_disable();
 	local_irq_save(flags);
 	if (raw_irqs_disabled_flags(flags)) {
-		old_cc = S390_lowcore.clock_comparator;
+		old_cc = local_tick_disable();
 		S390_lowcore.clock_comparator = -1ULL;
 		__ctl_store(cr0, 0, 0);
 		dummy = (cr0 & 0xffff00e0) | 0x00000800;
@@ -65,7 +65,7 @@ void __udelay(unsigned long usecs)
 
 	if (raw_irqs_disabled_flags(flags)) {
 		__ctl_load(cr0, 0, 0);
-		S390_lowcore.clock_comparator = old_cc;
+		local_tick_enable(old_cc);
 	}
 	if (!irq_context)
 		_local_bh_enable();
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index f4b6124fdb7..f28c43d2f61 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -72,7 +72,8 @@ void arch_release_hugepage(struct page *page)
 	page[1].index = 0;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
@@ -119,6 +120,11 @@ int pmd_huge(pmd_t pmd)
 	return !!(pmd_val(pmd) & _SEGMENT_ENTRY_LARGE);
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmdp, int write)
 {
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 388cc742005..1169130a97e 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -42,38 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
 char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
-void show_mem(void)
-{
-	unsigned long i, total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long flags;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  */
@@ -211,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	int rc;
 
 	pgdat = NODE_DATA(nid);
-	zone = pgdat->node_zones + ZONE_NORMAL;
+	zone = pgdat->node_zones + ZONE_MOVABLE;
 	rc = vmem_add_mapping(start, size);
 	if (rc)
 		return rc;
@@ -221,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int remove_memory(u64 start, u64 size)
+{
+	unsigned long start_pfn, end_pfn;
+
+	start_pfn = PFN_DOWN(start);
+	end_pfn = start_pfn + PFN_DOWN(size);
+	return offline_pages(start_pfn, end_pfn, 120 * HZ);
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 3e7384f4619..5131d50f851 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,8 +8,10 @@ mainmenu "Linux/SuperH Kernel Configuration"
 config SUPERH
 	def_bool y
 	select EMBEDDED
+	select HAVE_CLK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -22,6 +24,11 @@ config SUPERH32
 config SUPERH64
 	def_bool y if CPU_SH5
 
+config ARCH_DEFCONFIG
+	string
+	default "arch/sh/configs/shx3_defconfig" if SUPERH32
+	default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
@@ -41,6 +48,9 @@ config GENERIC_HWEIGHT
 config GENERIC_HARDIRQS
 	def_bool y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
 config GENERIC_IRQ_PROBE
 	def_bool y
 
@@ -56,6 +66,10 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool n
 
+config GENERIC_LOCKBREAK
+	def_bool y
+	depends on SMP && PREEMPT
+
 config SYS_SUPPORTS_PM
 	bool
 
@@ -87,9 +101,6 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config IO_TRAPPED
 	bool
 
@@ -346,219 +357,10 @@ config CPU_SUBTYPE_SH5_103
 endchoice
 
 source "arch/sh/mm/Kconfig"
+ 
 source "arch/sh/Kconfig.cpu"
 
-menu "Board support"
-
-config SOLUTION_ENGINE
-	bool
-
-config SH_SOLUTION_ENGINE
-	bool "SolutionEngine"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
-	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
-	  CPU_SUBTYPE_SH7750R 
-	help
-	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
-	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
-	bool "SolutionEngine7206"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7206
-	help
-	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-	  evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-	bool "SolutionEngine7619"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7619
-	help
-	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-	  evaluation board.
-	
-config SH_7721_SOLUTION_ENGINE
-	bool "SolutionEngine7721"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7721
-	help
-	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
-	  evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
-	bool "SolutionEngine7722"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
-	  evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
-	bool "SolutionEngine7751"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7751
-	help
-	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-	  evaluation board.
-	  
-config SH_7780_SOLUTION_ENGINE
-	bool "SolutionEngine7780"
-	select SOLUTION_ENGINE
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7780
-	help
-	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
-	  evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
-	bool "SolutionEngine7343"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7343
-	help
-	  Select 7343 SolutionEngine if configuring for a Hitachi
-	  SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
-config SH_HP6XX
-	bool "HP6XX"
-	select SYS_SUPPORTS_APM_EMULATION
-	select HD6446X_SERIES
-	depends on CPU_SUBTYPE_SH7709
-	help
-	  Select HP6XX if configuring for a HP jornada HP6xx.
-	  More information (hardware only) at
-	  <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
-	bool "Dreamcast"
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7091
-	help
-	  Select Dreamcast if configuring for a SEGA Dreamcast.
-	  More information at <http://www.linux-sh.org>
-
-config SH_SH03
-	bool "Interface CTP/PCI-SH03"
-	depends on CPU_SUBTYPE_SH7751
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  CTP/PCI-SH03 is a CPU module computer that is produced
-	  by Interface Corporation.
-	  More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
-	bool "SecureEdge5410"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SecureEdge5410 if configuring for a SnapGear SH board.
-	  This includes both the OEM SecureEdge products as well as the
-	  SME product line.
-
-config SH_RTS7751R2D
-	bool "RTS7751R2D"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-	help
-	  Select RTS7751R2D if configuring for a Renesas Technology
-	  Sales SH-Graphics board.
-
-config SH_SDK7780
-	bool "SDK7780R3"
-	depends on CPU_SUBTYPE_SH7780
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
-	  evaluation board.
-
-config SH_HIGHLANDER
-	bool "Highlander"
-	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_MIGOR
-	bool "Migo-R"
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select Migo-R if configuring for the SH7722 Migo-R platform
-          by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_EDOSK7705
-	bool "EDOSK7705"
-	depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
-	bool "SH4-202 MicroDev"
-	depends on CPU_SUBTYPE_SH4_202
-	help
-	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-	  with an SH4-202 CPU.
-
-config SH_LANDISK
-	bool "LANDISK"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
-	bool "TITAN"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select Titan if you are configuring for a Nimble Microsystems
-	  NetEngine NP51R.
-
-config SH_SHMIN
-	bool "SHMIN"
-	depends on CPU_SUBTYPE_SH7706
-	select CPU_HAS_IPR_IRQ
-	help
-	  Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
-	bool "L-BOX RE2"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
-	bool "SH-X3 Prototype board"
-	depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
-	bool "Magic Panel R2"
-	depends on CPU_SUBTYPE_SH7720
-	help
-	  Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
-	bool "Hitachi Cayman"
-	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-	select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
@@ -685,6 +487,23 @@ config CRASH_DUMP
 
 	  For more details see Documentation/kdump/kdump.txt
 
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl, it cannot be disabled and the task is only
+	  allowed to execute a few safe syscalls defined by each seccomp
+	  mode.
+
+	  If unsure, say N.
+
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on SYS_SUPPORTS_SMP
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0f454986022..4d2d102e00d 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xff804000" if CPU_SUBTYPE_MXG
 	default "0xffc30000" if CPU_SUBTYPE_SHX3
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
-				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
+				CPU_SUBTYPE_SH7343
 	default "0xffe80000" if CPU_SH4
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
@@ -181,7 +182,7 @@ if SUPERH64
 
 config SH64_PROC_ASIDS
 	bool "Debug: report ASIDs through /proc/asids"
-	depends on PROC_FS
+	depends on PROC_FS && MMU
 
 config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fb7b1b15e39..01d85c74481 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -68,7 +68,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32)	:= zImage
 
 # Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG	:= r7780mp_defconfig
+KBUILD_DEFCONFIG	:= shx3_defconfig
 KBUILD_IMAGE		:= $(defaultimage-y)
 
 #
@@ -91,47 +91,32 @@ LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4'
 LDFLAGS			+= -EB
 endif
 
-KBUILD_CFLAGS		+= -pipe $(cflags-y)
-KBUILD_AFLAGS		+= $(cflags-y)
-
 head-y			:= arch/sh/kernel/init_task.o
 head-$(CONFIG_SUPERH32)	+= arch/sh/kernel/head_32.o
 head-$(CONFIG_SUPERH64)	+= arch/sh/kernel/head_64.o
 
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-core-y				+= arch/sh/kernel/ arch/sh/mm/
+core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)		+= se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
-machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
-machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
-machdir-$(CONFIG_SH_SH03)			+= sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		+= snapgear
-machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
-machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
-machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
-machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
-machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
-machdir-$(CONFIG_SH_LANDISK)			+= landisk
-machdir-$(CONFIG_SH_TITAN)			+= titan
-machdir-$(CONFIG_SH_SHMIN)			+= shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= se/7619
-machdir-$(CONFIG_SH_LBOX_RE2)			+= lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2)		+= magicpanelr2
-machdir-$(CONFIG_SH_CAYMAN)			+= cayman
-
-incdir-y	:= $(notdir $(machdir-y))
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
+machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
+machdir-$(CONFIG_SH_SH03)			+= mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)		+= mach-snapgear
+machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
+machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
+machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= mach-microdev
+machdir-$(CONFIG_SH_LANDISK)			+= mach-landisk
+machdir-$(CONFIG_SH_TITAN)			+= mach-titan
+machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
 
 ifneq ($(machdir-y),)
 core-y	+= $(addprefix arch/sh/boards/, \
@@ -141,67 +126,40 @@ endif
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
 
-cpuincdir-$(CONFIG_CPU_SH2)	:= cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH2A)	:= cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH3)	:= cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4)	:= cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5)	:= cpu-sh5
-
-libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
-libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
-libs-y				+= $(LIBGCC)
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A)	+= cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2)	+= cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5
+cpuincdir-y			+= cpu-common	# Must be last
 
 drivers-y			+= arch/sh/drivers/
 drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 
 boot := arch/sh/boot
 
-ifneq ($(KBUILD_SRC),)
-incdir-prefix	:= $(srctree)/include/asm-sh/
-else
-incdir-prefix	:=
-endif
+cflags-y	+= $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+		   $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
 
-#	Update machine arch and proc symlinks if something which affects
-#	them changed.  We use .arch and .mach to indicate when they were
-#	updated last, otherwise make uses the target directory mtime.
+KBUILD_CFLAGS		+= -pipe $(cflags-y)
+KBUILD_CPPFLAGS		+= $(cflags-y)
+KBUILD_AFLAGS		+= $(cflags-y)
 
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
-		     include/config/auto.conf FORCE
-	@echo '  SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
-	@touch $@
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-#	Most boards have their own mach directories.  For the ones that
-#	don't, just reference the parent directory so the semantics are
-#	kept roughly the same.
-#
-#	When multiple boards are compiled in at the same time, preference
-#	for the mach link is given to whichever has a directory for its
-#	headers. However, this is only a workaround until platforms that
-#	can live in the same kernel image back away from relying on the
-#	mach link.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
-		      include/config/auto.conf FORCE
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)rm -f include/asm-sh/mach
-	$(Q)for i in $(incdir-y); do \
-	if [ -d $(srctree)/include/asm-sh/$$i ]; then \
-		echo -n '  SYMLINK include/asm-sh/mach -> '; \
-		echo -e "include/asm-sh/$$i"; \
-		ln -fsn $(incdir-prefix)$$i \
-			include/asm-sh/mach; \
-	else \
-		if [ ! -d include/asm-sh/mach ]; then \
-			echo -n '  SYMLINK include/asm-sh/mach -> '; \
-			echo -e 'include/asm-sh'; \
-			ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
-		fi; \
-	fi; \
-	done
-	@touch $@
+libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
+libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
+libs-y				+= $(LIBGCC)
 
 PHONY += maketools FORCE
 
@@ -215,8 +173,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux
 
 compressed: zImage
 
-archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \
-	     arch/sh/lib64/syscalltab.h
+archprepare: maketools arch/sh/lib64/syscalltab.h
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
@@ -258,6 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
 	$(call filechk,gen-syscalltab)
 
 CLEAN_FILES += arch/sh/lib64/syscalltab.h \
-	       include/asm-sh/machtypes.h \
-	       include/asm-sh/cpu include/asm-sh/.cpu \
-	       include/asm-sh/mach include/asm-sh/.mach
+	       include/asm-sh/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
new file mode 100644
index 00000000000..ae194869fd6
--- /dev/null
+++ b/arch/sh/boards/Kconfig
@@ -0,0 +1,258 @@
+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
+
+config SH_SOLUTION_ENGINE
+	bool "SolutionEngine"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
+	help
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7751
+	help
+	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+	bool "SystemH7751R"
+	depends on CPU_SUBTYPE_SH7751R
+	help
+	  Select SystemH if you are configuring for a Renesas SystemH
+	  7751R evaluation board.
+
+config SH_HP6XX
+	bool "HP6XX"
+	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select HP6XX if configuring for a HP jornada HP6xx.
+	  More information (hardware only) at
+	  <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7091
+	help
+	  Select Dreamcast if configuring for a SEGA Dreamcast.
+	  More information at <http://www.linux-sh.org>
+
+config SH_SH03
+	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  CTP/PCI-SH03 is a CPU module computer that is produced
+	  by Interface Corporation.
+	  More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+	bool "SecureEdge5410"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SecureEdge5410 if configuring for a SnapGear SH board.
+	  This includes both the OEM SecureEdge products as well as the
+	  SME product line.
+
+config SH_RTS7751R2D
+	bool "RTS7751R2D"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+	help
+	  Select RTS7751R2D if configuring for a Renesas Technology
+	  Sales SH-Graphics board.
+
+config SH_RSK7203
+	bool "RSK7203"
+	depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+	bool "SDK7780R3"
+	depends on CPU_SUBTYPE_SH7780
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+	  evaluation board.
+
+config SH_HIGHLANDER
+	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
+config SH_EDOSK7705
+	bool "EDOSK7705"
+	depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+	bool "SH4-202 MicroDev"
+	depends on CPU_SUBTYPE_SH4_202
+	help
+	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+	  with an SH4-202 CPU.
+
+config SH_LANDISK
+	bool "LANDISK"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+	bool "TITAN"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select Titan if you are configuring for a Nimble Microsystems
+	  NetEngine NP51R.
+
+config SH_SHMIN
+	bool "SHMIN"
+	depends on CPU_SUBTYPE_SH7706
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+	bool "SH-X3 Prototype board"
+	depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+	bool "Magic Panel R2"
+	depends on CPU_SUBTYPE_SH7720
+	help
+	  Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+	bool "Hitachi Cayman"
+	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+	select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+	int SH_MAGIC_PANEL_R2_VERSION
+	default "3"
+	help
+	  Set the version of the Magic Panel R2
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
new file mode 100644
index 00000000000..463022c7df3
--- /dev/null
+++ b/arch/sh/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
new file mode 100644
index 00000000000..fd1612590bf
--- /dev/null
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -0,0 +1,320 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+	.flags = SMC911X_USE_32BIT,
+	.irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+	[0] = {
+		.start	= 0xb6080000,
+		.end	= 0xb60fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 35,
+		.end	= 35,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc9118_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc9118_resources),
+	.resource	= smc9118_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+	{
+		 .name = "uboot",
+		 .offset = 0,
+		 .size = (1 * 1024 * 1024),
+		 .mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		 .name = "kernel",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = (2 * 1024 * 1024),
+	}, {
+		 .name = "other",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+	.width		= 2,
+	.parts		= ap325rxa_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= ap325rxa_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(ap325rxa_nor_flash_resources),
+	.dev		= {
+		.platform_data = &ap325rxa_nor_flash_data,
+	},
+};
+
+#define FPGA_LCDREG	0xB4100180
+#define FPGA_BKLREG	0xB4100212
+#define FPGA_LCDREG_VAL	0x0018
+#define PORT_PHCR	0xA405010E
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PZCR	0xA405014C
+#define PORT_HIZCRA	0xA4050158
+#define PORT_MSELCRB	0xA4050182
+#define PORT_PSDR	0xA405013E
+#define PORT_PZDR	0xA405016C
+#define PORT_PSELD	0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+	msleep(100);
+
+	/* ASD AP-320/325 LCD ON */
+	ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+	/* backlight */
+	ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+	ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+	ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB18,
+		.clock_divider = 1,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 40,
+			.right_margin = 160,
+			.hsync_len = 8,
+			.upper_margin = 63,
+			.lower_margin = 80,
+			.vsync_len = 1,
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+		.board_cfg = {
+			.display_on = ap320_wvga_power_on,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ncm03j_magic[] =
+{
+	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+	0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+	0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+	0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+	0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+	0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+	0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+	0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+	0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+	0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+	0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+	0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+	0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+	0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+	0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* no disable for now */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x6e;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ncm03j_magic[i];
+		buf[1] = camera_ncm03j_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+	.iface = 0,
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_UYVY,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.width = 640,
+		.height = 480,
+	},
+	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+	.name		= "soc_camera_platform",
+	.dev		= {
+		.platform_data	= &camera_info,
+	},
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+#ifdef CONFIG_I2C
+	&camera_device,
+#endif
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+	i2c_register_board_info(0, ap325rxa_i2c_devices,
+				ARRAY_SIZE(ap325rxa_i2c_devices));
+ 
+	return platform_add_devices(ap325rxa_devices,
+				ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+	/* LCDC configuration */
+	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+	ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+	ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+	/* CEU */
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+	ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+	ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+	.mv_name = "AP-325RXA",
+	.mv_setup = ap325rxa_setup,
+};
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c
index f3b8b07ea5d..f3b8b07ea5d 100644
--- a/arch/sh/boards/magicpanelr2/setup.c
+++ b/arch/sh/boards/board-magicpanelr2.c
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c
new file mode 100644
index 00000000000..ffbedc59a97
--- /dev/null
+++ b/arch/sh/boards/board-rsk7203.c
@@ -0,0 +1,136 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/smc911x.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smc911x_platdata smc911x_info = {
+	.flags		= SMC911X_USE_16BIT,
+	.irq_flags	= IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x24000000 + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc911x_resources),
+	.resource	= smc911x_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+	.name		= "RSK+ Flash",
+	.size		= 0x400000,
+	.bankwidth	= 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+	int nr_parts = 0;
+
+	simple_map_init(&rsk7203_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+	nr_parts = parse_mtd_partitions(flash_mtd, probes,
+					&parsed_partitions, 0);
+	/* If there is no partition table, used the hard coded table */
+	if (nr_parts <= 0) {
+		flash_data.parts = rsk7203_partitions;
+		flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+	} else {
+		flash_data.nr_parts = nr_parts;
+		flash_data.parts = parsed_partitions;
+	}
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+	&smc911x_device,
+	&flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+	set_mtd_partitions();
+	return platform_add_devices(rsk7203_devices,
+				    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+	.mv_name        = "RSK+7203",
+};
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
new file mode 100644
index 00000000000..b95d674ee70
--- /dev/null
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -0,0 +1,302 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PLD_LEDCR,
+		.end	= PLD_LEDCR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= R8A66597_ADDR,
+		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "r8a66597_hcd",
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= SM107_MEM_ADDR,
+		.end	= SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= SM107_REG_ADDR,
+		.end	= SM107_REG_ADDR + SM107_REG_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= 10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+	.pixclock	= 35714,	/* 28MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+	.pixclock	= 40000,	/* 25MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 2,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync		= 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_pnl,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT |
+			  SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_crt,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= 0,
+	.mclk		= 84 * 1000000,
+	.m1xclk		= 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= PCA9564_ADDR,
+		.end	= PCA9564_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+	.gpio			= 0,
+	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
+	.timeout		= 100,
+};
+
+static struct platform_device i2c_device = {
+	.name		= "i2c-pca-platform",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&r8a66597_usb_host_device,
+	&sm501_device,
+	&i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+	i2c_register_board_info(0, sh7785lcr_i2c_devices,
+				ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+	return platform_add_devices(sh7785lcr_devices,
+				    ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+
+	printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+	pm_power_off = sh7785lcr_power_off;
+
+	/* sm501 DRAM configuration */
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+	.mv_name		= "SH7785LCR",
+	.mv_setup		= sh7785lcr_setup,
+	.mv_init_irq		= init_sh7785lcr_IRQ,
+};
+
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c
index 16e5dae8ecf..16e5dae8ecf 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/board-shmin.c
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c
deleted file mode 100644
index 30ec7bebfaf..00000000000
--- a/arch/sh/boards/cayman/irq.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
- *
- * This file handles the board specific parts of the Cayman interrupt system
- *
- * Copyright (C) 2002 Stuart Menefy
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <asm/cpu/irq.h>
-#include <asm/page.h>
-
-/* Setup for the SMSC FDC37C935 / LAN91C100FD */
-#define SMSC_IRQ         IRQ_IRL1
-
-/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
-#define PCI2_IRQ         IRQ_IRL3
-
-unsigned long epld_virt;
-
-#define EPLD_BASE        0x04002000
-#define EPLD_STATUS_BASE (epld_virt + 0x10)
-#define EPLD_MASK_BASE   (epld_virt + 0x20)
-
-/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
-   the same SH-5 interrupt */
-
-static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
-{
-        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
-	return IRQ_NONE;
-}
-
-static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
-{
-        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
-	return IRQ_NONE;
-}
-
-static struct irqaction cayman_action_smsc = {
-	.name		= "Cayman SMSC Mux",
-	.handler	= cayman_interrupt_smsc,
-	.flags		= IRQF_DISABLED,
-};
-
-static struct irqaction cayman_action_pci2 = {
-	.name		= "Cayman PCI2 Mux",
-	.handler	= cayman_interrupt_pci2,
-	.flags		= IRQF_DISABLED,
-};
-
-static void enable_cayman_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned long mask;
-	unsigned int reg;
-	unsigned char bit;
-
-	irq -= START_EXT_IRQS;
-	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
-	bit = 1<<(irq % 8);
-	local_irq_save(flags);
-	mask = ctrl_inl(reg);
-	mask |= bit;
-	ctrl_outl(mask, reg);
-	local_irq_restore(flags);
-}
-
-void disable_cayman_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned long mask;
-	unsigned int reg;
-	unsigned char bit;
-
-	irq -= START_EXT_IRQS;
-	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
-	bit = 1<<(irq % 8);
-	local_irq_save(flags);
-	mask = ctrl_inl(reg);
-	mask &= ~bit;
-	ctrl_outl(mask, reg);
-	local_irq_restore(flags);
-}
-
-static void ack_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
-static void end_cayman_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_cayman_irq(irq);
-}
-
-static unsigned int startup_cayman_irq(unsigned int irq)
-{
-	enable_cayman_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
-struct hw_interrupt_type cayman_irq_type = {
-	.typename	= "Cayman-IRQ",
-	.startup	= startup_cayman_irq,
-	.shutdown	= shutdown_cayman_irq,
-	.enable		= enable_cayman_irq,
-	.disable	= disable_cayman_irq,
-	.ack		= ack_cayman_irq,
-	.end		= end_cayman_irq,
-};
-
-int cayman_irq_demux(int evt)
-{
-	int irq = intc_evt_to_irq[evt];
-
-	if (irq == SMSC_IRQ) {
-		unsigned long status;
-		int i;
-
-		status = ctrl_inl(EPLD_STATUS_BASE) &
-			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
-		if (status == 0) {
-			irq = -1;
-		} else {
-			for (i=0; i<8; i++) {
-				if (status & (1<<i))
-					break;
-			}
-			irq = START_EXT_IRQS + i;
-		}
-	}
-
-	if (irq == PCI2_IRQ) {
-		unsigned long status;
-		int i;
-
-		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
-			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
-		if (status == 0) {
-			irq = -1;
-		} else {
-			for (i=0; i<8; i++) {
-				if (status & (1<<i))
-					break;
-			}
-			irq = START_EXT_IRQS + (3 * 8) + i;
-		}
-	}
-
-	return irq;
-}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-int cayman_irq_describe(char* p, int irq)
-{
-	if (irq < NR_INTC_IRQS) {
-		return intc_irq_describe(p, irq);
-	} else if (irq < NR_INTC_IRQS + 8) {
-		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
-	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
-		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
-	}
-
-	return 0;
-}
-#endif
-
-void init_cayman_irq(void)
-{
-	int i;
-
-	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
-	if (!epld_virt) {
-		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
-		return;
-	}
-
-	for (i=0; i<NR_EXT_IRQS; i++) {
-		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
-	}
-
-	/* Setup the SMSC interrupt */
-	setup_irq(SMSC_IRQ, &cayman_action_smsc);
-	setup_irq(PCI2_IRQ, &cayman_action_pci2);
-}
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c
deleted file mode 100644
index 8c9fa472d8f..00000000000
--- a/arch/sh/boards/cayman/setup.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * arch/sh/mach-cayman/setup.c
- *
- * SH5 Cayman support
- *
- * Copyright (C) 2002  David J. Mckay & Benedict Gaster
- * Copyright (C) 2003 - 2007  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/cpu/irq.h>
-
-/*
- * Platform Dependent Interrupt Priorities.
- */
-
-/* Using defaults defined in irq.h */
-#define	RES NO_PRIORITY		/* Disabled */
-#define IR0 IRL0_PRIORITY	/* IRLs */
-#define IR1 IRL1_PRIORITY
-#define IR2 IRL2_PRIORITY
-#define IR3 IRL3_PRIORITY
-#define PCA INTA_PRIORITY	/* PCI Ints */
-#define PCB INTB_PRIORITY
-#define PCC INTC_PRIORITY
-#define PCD INTD_PRIORITY
-#define SER TOP_PRIORITY
-#define ERR TOP_PRIORITY
-#define PW0 TOP_PRIORITY
-#define PW1 TOP_PRIORITY
-#define PW2 TOP_PRIORITY
-#define PW3 TOP_PRIORITY
-#define DM0 NO_PRIORITY		/* DMA Ints */
-#define DM1 NO_PRIORITY
-#define DM2 NO_PRIORITY
-#define DM3 NO_PRIORITY
-#define DAE NO_PRIORITY
-#define TU0 TIMER_PRIORITY	/* TMU Ints */
-#define TU1 NO_PRIORITY
-#define TU2 NO_PRIORITY
-#define TI2 NO_PRIORITY
-#define ATI NO_PRIORITY		/* RTC Ints */
-#define PRI NO_PRIORITY
-#define CUI RTC_PRIORITY
-#define ERI SCIF_PRIORITY	/* SCIF Ints */
-#define RXI SCIF_PRIORITY
-#define BRI SCIF_PRIORITY
-#define TXI SCIF_PRIORITY
-#define ITI TOP_PRIORITY	/* WDT Ints */
-
-/* Setup for the SMSC FDC37C935 */
-#define SMSC_SUPERIO_BASE	0x04000000
-#define SMSC_CONFIG_PORT_ADDR	0x3f0
-#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR	0x3f1
-
-#define SMSC_ENTER_CONFIG_KEY	0x55
-#define SMSC_EXIT_CONFIG_KEY	0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX	0x07
-#define SMSC_DEVICE_ID_INDEX	0x20
-#define SMSC_DEVICE_REV_INDEX	0x21
-#define SMSC_ACTIVATE_INDEX	0x30
-#define SMSC_PRIMARY_BASE_INDEX  0x60
-#define SMSC_SECONDARY_BASE_INDEX 0x62
-#define SMSC_PRIMARY_INT_INDEX	0x70
-#define SMSC_SECONDARY_INT_INDEX 0x72
-
-#define SMSC_IDE1_DEVICE	1
-#define SMSC_KEYBOARD_DEVICE	7
-#define SMSC_CONFIG_REGISTERS	8
-
-#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE	0x01f0
-#define IDE1_SECONDARY_BASE	0x03f6
-
-unsigned long smsc_superio_virt;
-
-int platform_int_priority[NR_INTC_IRQS] = {
-	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
-	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
-	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
-	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
-	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
-	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
-	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
-	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
-};
-
-static int __init smsc_superio_setup(void)
-{
-	unsigned char devid, devrev;
-
-	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
-	if (!smsc_superio_virt) {
-		panic("Unable to remap SMSC SuperIO\n");
-	}
-
-	/* Initially the chip is in run state */
-	/* Put it into configuration state */
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	/* Read device ID info */
-	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
-
-	/* Select the keyboard device */
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-
-	/* enable it */
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
-	/* Select the interrupts */
-	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
-	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
-
-#ifdef CONFIG_IDE
-	/*
-	 * Only IDE1 exists on the Cayman
-	 */
-
-	/* Power it on */
-	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
-
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
-				   SMSC_PRIMARY_BASE_INDEX + 0);
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
-				   SMSC_PRIMARY_BASE_INDEX + 1);
-
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
-				   SMSC_SECONDARY_BASE_INDEX + 0);
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
-				   SMSC_SECONDARY_BASE_INDEX + 1);
-
-	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
-				   SMCS_LOGICAL_DEV_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
-	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
-#endif
-
-	/* Exit the configuration state */
-	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	return 0;
-}
-__initcall(smsc_superio_setup);
-
-static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
-{
-	if (port < 0x400) {
-		extern unsigned long smsc_superio_virt;
-		return (void __iomem *)((port << 2) | smsc_superio_virt);
-	}
-
-	return (void __iomem *)port;
-}
-
-extern void init_cayman_irq(void);
-
-static struct sh_machine_vector mv_cayman __initmv = {
-	.mv_name		= "Hitachi Cayman",
-	.mv_nr_irqs		= 64,
-	.mv_ioport_map		= cayman_ioport_map,
-	.mv_init_irq		= init_cayman_irq,
-};
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c
deleted file mode 100644
index 9d0673a9092..00000000000
--- a/arch/sh/boards/dreamcast/irq.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/irq.c
- *
- * Holly IRQ support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- * Released under the terms of the GNU GPL v2.0
- */
-
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dreamcast/sysasic.h>
-
-/* Dreamcast System ASIC Hardware Events -
-
-   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
-   hardware events from system peripherals and triggering an SH7750 IRQ.
-   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
-   set in the Event Mask Registers (EMRs).  When a hardware event is
-   triggered, it's corresponding bit in the Event Status Registers (ESRs)
-   is set, and that bit should be rewritten to the ESR to acknowledge that
-   event.
-
-   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
-   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
-   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
-   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
-   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
-
-   In the kernel, these events are mapped to virtual IRQs so that drivers can
-   respond to them as they would a normal interrupt.  In order to keep this
-   mapping simple, the events are mapped as:
-
-   6900/6910 - Events  0-31, IRQ 13
-   6904/6924 - Events 32-63, IRQ 11
-   6908/6938 - Events 64-95, IRQ  9
-
-*/
-
-#define ESR_BASE 0x005f6900    /* Base event status register */
-#define EMR_BASE 0x005f6910    /* Base event mask register */
-
-/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
-   1 = 0x6920, 2 = 0x6930; also determine the event offset */
-#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
-
-/* Return the hardware event's bit positon within the EMR/ESR */
-#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
-
-/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
-   (logically mapped to the corresponding bit for the hardware event). */
-
-/* Disable the hardware event by masking its bit in its EMR */
-static inline void disable_systemasic_irq(unsigned int irq)
-{
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
-
-        mask = inl(emr);
-        mask &= ~(1 << EVENT_BIT(irq));
-        outl(mask, emr);
-}
-
-/* Enable the hardware event by setting its bit in its EMR */
-static inline void enable_systemasic_irq(unsigned int irq)
-{
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
-
-        mask = inl(emr);
-        mask |= (1 << EVENT_BIT(irq));
-        outl(mask, emr);
-}
-
-/* Acknowledge a hardware event by writing its bit back to its ESR */
-static void ack_systemasic_irq(unsigned int irq)
-{
-        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
-        disable_systemasic_irq(irq);
-        outl((1 << EVENT_BIT(irq)), esr);
-}
-
-/* After a IRQ has been ack'd and responded to, it needs to be renabled */
-static void end_systemasic_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                enable_systemasic_irq(irq);
-}
-
-static unsigned int startup_systemasic_irq(unsigned int irq)
-{
-        enable_systemasic_irq(irq);
-
-        return 0;
-}
-
-static void shutdown_systemasic_irq(unsigned int irq)
-{
-        disable_systemasic_irq(irq);
-}
-
-struct hw_interrupt_type systemasic_int = {
-        .typename       = "System ASIC",
-        .startup        = startup_systemasic_irq,
-        .shutdown       = shutdown_systemasic_irq,
-        .enable         = enable_systemasic_irq,
-        .disable        = disable_systemasic_irq,
-        .ack            = ack_systemasic_irq,
-        .end            = end_systemasic_irq,
-};
-
-/*
- * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
- */
-int systemasic_irq_demux(int irq)
-{
-        __u32 emr, esr, status, level;
-        __u32 j, bit;
-
-        switch (irq) {
-                case 13:
-                        level = 0;
-                        break;
-                case 11:
-                        level = 1;
-                        break;
-                case  9:
-                        level = 2;
-                        break;
-                default:
-                        return irq;
-        }
-        emr = EMR_BASE + (level << 4) + (level << 2);
-        esr = ESR_BASE + (level << 2);
-
-        /* Mask the ESR to filter any spurious, unwanted interrupts */
-        status = inl(esr);
-        status &= inl(emr);
-
-        /* Now scan and find the first set bit as the event to map */
-        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
-                if (status & bit) {
-                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
-                        return irq;
-                }
-        }
-
-        /* Not reached */
-        return irq;
-}
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c
deleted file mode 100644
index b3a876a3b85..00000000000
--- a/arch/sh/boards/dreamcast/rtc.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/rtc.c
- *
- * Dreamcast AICA RTC routines.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
- *
- * Released under the terms of the GNU GPL v2.0.
- *
- */
-
-#include <linux/time.h>
-#include <asm/rtc.h>
-#include <asm/io.h>
-
-/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
-   seconds) to get the standard Unix Epoch when getting the time, and add
-   20 years when setting the time. */
-#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
-
-/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
-   registers.*/
-#define AICA_RTC_SECS_H		0xa0710000
-#define AICA_RTC_SECS_L		0xa0710004
-
-/**
- * aica_rtc_gettimeofday - Get the time from the AICA RTC
- * @ts: pointer to resulting timespec
- *
- * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
- */
-void aica_rtc_gettimeofday(struct timespec *ts)
-{
-	unsigned long val1, val2;
-
-	do {
-		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-
-		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-	} while (val1 != val2);
-
-	ts->tv_sec = val1 - TWENTY_YEARS;
-
-	/* Can't get nanoseconds with just a seconds counter. */
-	ts->tv_nsec = 0;
-}
-
-/**
- * aica_rtc_settimeofday - Set the AICA RTC to the current time
- * @secs: contains the time_t to set
- *
- * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
- */
-int aica_rtc_settimeofday(const time_t secs)
-{
-	unsigned long val1, val2;
-	unsigned long adj = secs + TWENTY_YEARS;
-
-	do {
-		ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
-		ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
-
-		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-
-		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-	} while (val1 != val2);
-
-	return 0;
-}
-
-void aica_time_init(void)
-{
-	rtc_sh_get_time = aica_rtc_gettimeofday;
-	rtc_sh_set_time = aica_rtc_settimeofday;
-}
-
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
deleted file mode 100644
index 2581c8cd5df..00000000000
--- a/arch/sh/boards/dreamcast/setup.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/setup.c
- *
- * Hardware support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- *
- * Released under the terms of the GNU GPL v2.0.
- *
- * This file originally bore the message (with enclosed-$):
- *	Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
- *	SEGA Dreamcast support
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
-
-extern struct hw_interrupt_type systemasic_int;
-extern void aica_time_init(void);
-extern int gapspci_init(void);
-extern int systemasic_irq_demux(int);
-
-static void __init dreamcast_setup(char **cmdline_p)
-{
-	int i;
-
-	/* Mask all hardware events */
-	/* XXX */
-
-	/* Acknowledge any previous events */
-	/* XXX */
-
-	__set_io_port_base(0xa0000000);
-
-	/* Assign all virtual IRQs to the System ASIC int. handler */
-	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
-		irq_desc[i].chip = &systemasic_int;
-
-	board_time_init = aica_time_init;
-
-#ifdef CONFIG_PCI
-	if (gapspci_init() < 0)
-		printk(KERN_WARNING "GAPSPCI was not detected.\n");
-#endif
-}
-
-static struct sh_machine_vector mv_dreamcast __initmv = {
-	.mv_name		= "Sega Dreamcast",
-	.mv_setup		= dreamcast_setup,
-	.mv_irq_demux		= systemasic_irq_demux,
-};
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c
deleted file mode 100644
index d22f6eac9cc..00000000000
--- a/arch/sh/boards/hp6xx/pm.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * hp6x0 Power Management Routines
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <asm/io.h>
-#include <asm/hd64461.h>
-#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
-#include <asm/pm.h>
-
-#define STBCR		0xffffff82
-#define STBCR2		0xffffff88
-
-static int hp6x0_pm_enter(suspend_state_t state)
-{
-	u8 stbcr, stbcr2;
-#ifdef CONFIG_HD64461_ENABLER
-	u8 scr;
-	u16 hd64461_stbcr;
-#endif
-
-#ifdef CONFIG_HD64461_ENABLER
-	outb(0, HD64461_PCC1CSCIER);
-
-	scr = inb(HD64461_PCC1SCR);
-	scr |= HD64461_PCCSCR_VCC1;
-	outb(scr, HD64461_PCC1SCR);
-
-	hd64461_stbcr = inw(HD64461_STBCR);
-	hd64461_stbcr |= HD64461_STBCR_SPC1ST;
-	outw(hd64461_stbcr, HD64461_STBCR);
-#endif
-
-	ctrl_outb(0x1f, DACR);
-
-	stbcr = ctrl_inb(STBCR);
-	ctrl_outb(0x01, STBCR);
-
-	stbcr2 = ctrl_inb(STBCR2);
-	ctrl_outb(0x7f , STBCR2);
-
-	outw(0xf07f, HD64461_SCPUCR);
-
-	pm_enter();
-
-	outw(0, HD64461_SCPUCR);
-	ctrl_outb(stbcr, STBCR);
-	ctrl_outb(stbcr2, STBCR2);
-
-#ifdef CONFIG_HD64461_ENABLER
-	hd64461_stbcr = inw(HD64461_STBCR);
-	hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
-	outw(hd64461_stbcr, HD64461_STBCR);
-
-	outb(0x4c, HD64461_PCC1CSCIER);
-	outb(0x00, HD64461_PCC1CSCR);
-#endif
-
-	return 0;
-}
-
-static struct platform_suspend_ops hp6x0_pm_ops = {
-	.enter		= hp6x0_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init hp6x0_pm_init(void)
-{
-	suspend_set_ops(&hp6x0_pm_ops);
-	return 0;
-}
-
-late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S
deleted file mode 100644
index 45e9bf0b911..00000000000
--- a/arch/sh/boards/hp6xx/pm_wakeup.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/cpu/mmu_context.h>
-
-#define k0	r0
-#define k1	r1
-#define k2	r2
-#define k3	r3
-#define k4	r4
-
-/*
- * Kernel mode register usage:
- *	k0	scratch
- *	k1	scratch
- *	k2	scratch (Exception code)
- *	k3	scratch (Return address)
- *	k4	scratch
- *	k5	reserved
- *	k6	Global Interrupt Mask (0--15 << 4)
- *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
- */
-
-ENTRY(wakeup_start)
-! clear STBY bit
-	mov	#-126, k2
-   	and	#127, k0
-	mov.b	k0, @k2
-! enable refresh
-	mov.l	5f, k1
-	mov.w	6f, k0
-  	mov.w	k0, @k1
-! jump to handler
-	mov.l	2f, k2
-	mov.l	3f, k3
-	mov.l	@k2, k2
-
-	mov.l	4f, k1
-	jmp	@k1
-	nop
-
-	.align	2
-1:	.long	EXPEVT
-2:	.long	INTEVT
-3:	.long	ret_from_irq
-4:	.long	handle_exception
-5:	.long	0xffffff68
-6:	.word	0x0524
-
-ENTRY(wakeup_end)
-	nop
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
deleted file mode 100644
index 2f414ac3c69..00000000000
--- a/arch/sh/boards/hp6xx/setup.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/setup.c
- *
- * Copyright (C) 2002 Andriy Skulysh
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
-
-#define	SCPCR	0xa4000116
-#define	SCPDR	0xa4000136
-
-/* CF Slot */
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start = 0x15000000 + 0x1f0,
-		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = 0x15000000 + 0x1fe,
-		.end   = 0x15000000 + 0x1fe + 0x01,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = 77,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device = {
-	.name		=  "pata_platform",
-	.id		=  -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-};
-
-static struct platform_device jornadakbd_device = {
-	.name		= "jornada680_kbd",
-	.id		= -1,
-};
-
-static struct platform_device *hp6xx_devices[] __initdata = {
-	&cf_ide_device,
-	&jornadakbd_device,
-};
-
-static void __init hp6xx_init_irq(void)
-{
-	/* Gets touchscreen and powerbutton IRQ working */
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static int __init hp6xx_devices_setup(void)
-{
-	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
-}
-
-static void __init hp6xx_setup(char **cmdline_p)
-{
-	u8 v8;
-	u16 v;
-
-	v = inw(HD64461_STBCR);
-	v |=	HD64461_STBCR_SURTST | HD64461_STBCR_SIRST	|
-		HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST	|
-		HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST	|
-		HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
-		HD64461_STBCR_SAFECKE_IST;
-#ifndef CONFIG_HD64461_ENABLER
-	v |= HD64461_STBCR_SPC1ST;
-#endif
-	outw(v, HD64461_STBCR);
-	v = inw(HD64461_GPADR);
-	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
-	outw(v, HD64461_GPADR);
-
-	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
-
-#ifndef CONFIG_HD64461_ENABLER
-	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
-#endif
-
-	sh_dac_output(0, DAC_SPEAKER_VOLUME);
-	sh_dac_disable(DAC_SPEAKER_VOLUME);
-	v8 = ctrl_inb(DACR);
-	v8 &= ~DACR_DAE;
-	ctrl_outb(v8,DACR);
-
-	v8 = ctrl_inb(SCPDR);
-	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
-	v8 &= ~SCPDR_TS_SCAN_ENABLE;
-	ctrl_outb(v8, SCPDR);
-
-	v = ctrl_inw(SCPCR);
-	v &= ~SCPCR_TS_MASK;
-	v |= SCPCR_TS_ENABLE;
-	ctrl_outw(v, SCPCR);
-}
-device_initcall(hp6xx_devices_setup);
-
-static struct sh_machine_vector mv_hp6xx __initmv = {
-	.mv_name = "hp6xx",
-	.mv_setup = hp6xx_setup,
-	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
-	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
-	.mv_irq_demux = hd64461_irq_demux,
-	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
-	.mv_init_irq = hp6xx_init_irq,
-};
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
deleted file mode 100644
index 0c15b0a50b9..00000000000
--- a/arch/sh/boards/landisk/gio.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * arch/sh/boards/landisk/gio.c - driver for landisk
- *
- * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
- * LANDISK and USL-5P Button, LED and GIO driver drive function.
- *
- *   Copylight (C) 2006 kogiidena
- *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/kdev_t.h>
-#include <linux/cdev.h>
-#include <linux/fs.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/landisk/gio.h>
-#include <asm/landisk/iodata_landisk.h>
-
-#define DEVCOUNT                4
-#define GIO_MINOR	        2	/* GIO minor no. */
-
-static dev_t dev;
-static struct cdev *cdev_p;
-static int openCnt;
-
-static int gio_open(struct inode *inode, struct file *filp)
-{
-	int minor;
-	int ret = -ENOENT;
-
-	lock_kernel();
-	minor = MINOR(inode->i_rdev);
-	if (minor < DEVCOUNT) {
-		if (openCnt > 0) {
-			ret = -EALREADY;
-		} else {
-			openCnt++;
-			ret = 0;
-		}
-	}
-	unlock_kernel();
-	return ret;
-}
-
-static int gio_close(struct inode *inode, struct file *filp)
-{
-	int minor;
-
-	minor = MINOR(inode->i_rdev);
-	if (minor < DEVCOUNT) {
-		openCnt--;
-	}
-	return 0;
-}
-
-static int gio_ioctl(struct inode *inode, struct file *filp,
-			     unsigned int cmd, unsigned long arg)
-{
-	unsigned int data;
-	static unsigned int addr = 0;
-
-	if (cmd & 0x01) {	/* write */
-		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
-			return -EFAULT;
-		}
-	}
-
-	switch (cmd) {
-	case GIODRV_IOCSGIOSETADDR:	/* address set */
-		addr = data;
-		break;
-
-	case GIODRV_IOCSGIODATA1:	/* write byte */
-		ctrl_outb((unsigned char)(0x0ff & data), addr);
-		break;
-
-	case GIODRV_IOCSGIODATA2:	/* write word */
-		if (addr & 0x01) {
-			return -EFAULT;
-		}
-		ctrl_outw((unsigned short int)(0x0ffff & data), addr);
-		break;
-
-	case GIODRV_IOCSGIODATA4:	/* write long */
-		if (addr & 0x03) {
-			return -EFAULT;
-		}
-		ctrl_outl(data, addr);
-		break;
-
-	case GIODRV_IOCGGIODATA1:	/* read byte */
-		data = ctrl_inb(addr);
-		break;
-
-	case GIODRV_IOCGGIODATA2:	/* read word */
-		if (addr & 0x01) {
-			return -EFAULT;
-		}
-		data = ctrl_inw(addr);
-		break;
-
-	case GIODRV_IOCGGIODATA4:	/* read long */
-		if (addr & 0x03) {
-			return -EFAULT;
-		}
-		data = ctrl_inl(addr);
-		break;
-	default:
-		return -EFAULT;
-		break;
-	}
-
-	if ((cmd & 0x01) == 0) {	/* read */
-		if (copy_to_user((int *)arg, &data, sizeof(int))) {
-			return -EFAULT;
-		}
-	}
-	return 0;
-}
-
-static const struct file_operations gio_fops = {
-	.owner = THIS_MODULE,
-	.open = gio_open,	/* open */
-	.release = gio_close,	/* release */
-	.ioctl = gio_ioctl,	/* ioctl */
-};
-
-static int __init gio_init(void)
-{
-	int error;
-
-	printk(KERN_INFO "gio: driver initialized\n");
-
-	openCnt = 0;
-
-	if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
-		printk(KERN_ERR
-		       "gio: Couldn't alloc_chrdev_region, error=%d\n",
-		       error);
-		return 1;
-	}
-
-	cdev_p = cdev_alloc();
-	cdev_p->ops = &gio_fops;
-	error = cdev_add(cdev_p, dev, DEVCOUNT);
-	if (error) {
-		printk(KERN_ERR
-		       "gio: Couldn't cdev_add, error=%d\n", error);
-		return 1;
-	}
-
-	return 0;
-}
-
-static void __exit gio_exit(void)
-{
-	cdev_del(cdev_p);
-	unregister_chrdev_region(dev, DEVCOUNT);
-}
-
-module_init(gio_init);
-module_exit(gio_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
deleted file mode 100644
index 258649491d4..00000000000
--- a/arch/sh/boards/landisk/irq.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/sh/boards/landisk/irq.c
- *
- * I-O DATA Device, Inc. LANDISK Support
- *
- * Copyright (C) 2005-2007 kogiidena
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/landisk/iodata_landisk.h>
-
-static void disable_landisk_irq(unsigned int irq)
-{
-	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
-
-	ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
-}
-
-static void enable_landisk_irq(unsigned int irq)
-{
-	unsigned char value = (0x01 << (irq - 5));
-
-	ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
-}
-
-static struct irq_chip landisk_irq_chip __read_mostly = {
-	.name		= "LANDISK",
-	.mask		= disable_landisk_irq,
-	.unmask		= enable_landisk_irq,
-	.mask_ack	= disable_landisk_irq,
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_landisk_IRQ(void)
-{
-	int i;
-
-	for (i = 5; i < 14; i++) {
-		disable_irq_nosync(i);
-		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
-					      handle_level_irq, "level");
-		enable_landisk_irq(i);
-	}
-	ctrl_outb(0x00, PA_PWRINT_CLR);
-}
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c
deleted file mode 100644
index 5a9b70b5dec..00000000000
--- a/arch/sh/boards/landisk/psw.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * arch/sh/boards/landisk/psw.c
- *
- * push switch support for LANDISK and USL-5P
- *
- * Copyright (C) 2006-2007  Paul Mundt
- * Copyright (C) 2007  kogiidena
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
-	struct platform_device *pdev = arg;
-	struct push_switch *psw = platform_get_drvdata(pdev);
-	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
-	unsigned int sw_value;
-	int ret = 0;
-
-	sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
-
-	/* Nothing to do if there's no state change */
-	if (psw->state) {
-		ret = 1;
-		goto out;
-	}
-
-	/* Figure out who raised it */
-	if (sw_value & (1 << psw_info->bit)) {
-		psw->state = 1;
-		mod_timer(&psw->debounce, jiffies + 50);
-		ret = 1;
-	}
-
-out:
-	/* Clear the switch IRQs */
-	ctrl_outb(0x00, PA_PWRINT_CLR);
-
-	return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_power_resources[] = {
-	[0] = {
-		.start = IRQ_POWER,
-		.flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct resource psw_usl5p_resources[] = {
-	[0] = {
-		.start = IRQ_BUTTON,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct push_switch_platform_info psw_power_platform_data = {
-	.name		= "psw_power",
-	.bit		= 4,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw1_platform_data = {
-	.name		= "psw1",
-	.bit		= 0,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw2_platform_data = {
-	.name		= "psw2",
-	.bit		= 2,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw3_platform_data = {
-	.name		= "psw3",
-	.bit		= 1,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device psw_power_switch_device = {
-	.name		= "push-switch",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(psw_power_resources),
-	.resource	= psw_power_resources,
-	.dev		= {
-		.platform_data = &psw_power_platform_data,
-	},
-};
-
-static struct platform_device psw1_switch_device = {
-	.name		= "push-switch",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev		= {
-		.platform_data = &psw1_platform_data,
-	},
-};
-
-static struct platform_device psw2_switch_device = {
-	.name		= "push-switch",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev		= {
-		.platform_data = &psw2_platform_data,
-	},
-};
-
-static struct platform_device psw3_switch_device = {
-	.name		= "push-switch",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev = {
-		.platform_data = &psw3_platform_data,
-	},
-};
-
-static struct platform_device *psw_devices[] = {
-	&psw_power_switch_device,
-	&psw1_switch_device,
-	&psw2_switch_device,
-	&psw3_switch_device,
-};
-
-static int __init psw_init(void)
-{
-	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
deleted file mode 100644
index 2b708ec7255..00000000000
--- a/arch/sh/boards/landisk/setup.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * arch/sh/boards/landisk/setup.c
- *
- * I-O DATA Device, Inc. LANDISK Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005-2007 kogiidena
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/pm.h>
-#include <linux/mm.h>
-#include <asm/machvec.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/io.h>
-
-void init_landisk_IRQ(void);
-
-static void landisk_power_off(void)
-{
-        ctrl_outb(0x01, PA_SHUTDOWN);
-}
-
-static struct resource cf_ide_resources[3];
-
-static struct pata_platform_info pata_info = {
-	.ioport_shift	= 1,
-};
-
-static struct platform_device cf_ide_device = {
-	.name		= "pata_platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-	.dev		= {
-		.platform_data = &pata_info,
-	},
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rs5c313",
-	.id		= -1,
-};
-
-static struct platform_device *landisk_devices[] __initdata = {
-	&cf_ide_device,
-	&rtc_device,
-};
-
-static int __init landisk_devices_setup(void)
-{
-	pgprot_t prot;
-	unsigned long paddrbase;
-	void *cf_ide_base;
-
-	/* open I/O area window */
-	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
-	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
-	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
-	if (!cf_ide_base) {
-		printk("allocate_cf_area : can't open CF I/O window!\n");
-		return -ENOMEM;
-	}
-
-	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
-	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
-	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
-	cf_ide_resources[0].flags = IORESOURCE_IO;
-	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
-	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
-	cf_ide_resources[1].flags = IORESOURCE_IO;
-	cf_ide_resources[2].start = IRQ_FATA;
-	cf_ide_resources[2].flags = IORESOURCE_IRQ;
-
-	return platform_add_devices(landisk_devices,
-				    ARRAY_SIZE(landisk_devices));
-}
-
-__initcall(landisk_devices_setup);
-
-static void __init landisk_setup(char **cmdline_p)
-{
-        /* LED ON */
-	ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
-
-	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
-	pm_power_off = landisk_power_off;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_landisk __initmv = {
-	.mv_name = "LANDISK",
-	.mv_nr_irqs = 72,
-	.mv_setup = landisk_setup,
-	.mv_init_irq = init_landisk_IRQ,
-};
diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index 489a8f86736..489a8f86736 100644
--- a/arch/sh/boards/cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
new file mode 100644
index 00000000000..ceb37ae92c7
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -0,0 +1,197 @@
+/*
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
+
+unsigned long epld_virt;
+
+#define EPLD_BASE        0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE   (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+   the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+	return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+	return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+	.name		= "Cayman SMSC Mux",
+	.handler	= cayman_interrupt_smsc,
+	.flags		= IRQF_DISABLED,
+};
+
+static struct irqaction cayman_action_pci2 = {
+	.name		= "Cayman PCI2 Mux",
+	.handler	= cayman_interrupt_pci2,
+	.flags		= IRQF_DISABLED,
+};
+
+static void enable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask |= bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+void disable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask &= ~bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+static void ack_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+static void end_cayman_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_cayman_irq(irq);
+}
+
+static unsigned int startup_cayman_irq(unsigned int irq)
+{
+	enable_cayman_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+struct hw_interrupt_type cayman_irq_type = {
+	.typename	= "Cayman-IRQ",
+	.startup	= startup_cayman_irq,
+	.shutdown	= shutdown_cayman_irq,
+	.enable		= enable_cayman_irq,
+	.disable	= disable_cayman_irq,
+	.ack		= ack_cayman_irq,
+	.end		= end_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+	int irq = intc_evt_to_irq[evt];
+
+	if (irq == SMSC_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE) &
+			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + i;
+		}
+	}
+
+	if (irq == PCI2_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + (3 * 8) + i;
+		}
+	}
+
+	return irq;
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int cayman_irq_describe(char* p, int irq)
+{
+	if (irq < NR_INTC_IRQS) {
+		return intc_irq_describe(p, irq);
+	} else if (irq < NR_INTC_IRQS + 8) {
+		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
+	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
+		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
+	}
+
+	return 0;
+}
+#endif
+
+void init_cayman_irq(void)
+{
+	int i;
+
+	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+	if (!epld_virt) {
+		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+		return;
+	}
+
+	for (i=0; i<NR_EXT_IRQS; i++) {
+		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+	}
+
+	/* Setup the SMSC interrupt */
+	setup_irq(SMSC_IRQ, &cayman_action_smsc);
+	setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c
index a808eac4ecd..a808eac4ecd 100644
--- a/arch/sh/boards/cayman/led.c
+++ b/arch/sh/boards/mach-cayman/led.c
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
new file mode 100644
index 00000000000..e7f9cc5f2ff
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -0,0 +1,187 @@
+/*
+ * arch/sh/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <cpu/irq.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define	RES NO_PRIORITY		/* Disabled */
+#define IR0 IRL0_PRIORITY	/* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY	/* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY		/* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY	/* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY		/* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY	/* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY	/* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE	0x04000000
+#define SMSC_CONFIG_PORT_ADDR	0x3f0
+#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY	0x55
+#define SMSC_EXIT_CONFIG_KEY	0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	0x07
+#define SMSC_DEVICE_ID_INDEX	0x20
+#define SMSC_DEVICE_REV_INDEX	0x21
+#define SMSC_ACTIVATE_INDEX	0x30
+#define SMSC_PRIMARY_BASE_INDEX  0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX	0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE	1
+#define SMSC_KEYBOARD_DEVICE	7
+#define SMSC_CONFIG_REGISTERS	8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE	0x01f0
+#define IDE1_SECONDARY_BASE	0x03f6
+
+unsigned long smsc_superio_virt;
+
+int platform_int_priority[NR_INTC_IRQS] = {
+	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
+	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
+	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
+	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
+	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
+	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+	unsigned char devid, devrev;
+
+	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+	if (!smsc_superio_virt) {
+		panic("Unable to remap SMSC SuperIO\n");
+	}
+
+	/* Initially the chip is in run state */
+	/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	/* Read device ID info */
+	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+	/* Select the keyboard device */
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+	/* enable it */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	/* Select the interrupts */
+	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+#ifdef CONFIG_IDE
+	/*
+	 * Only IDE1 exists on the Cayman
+	 */
+
+	/* Power it on */
+	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+				   SMSC_PRIMARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+				   SMSC_PRIMARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+				   SMSC_SECONDARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+				   SMSC_SECONDARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+				   SMCS_LOGICAL_DEV_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+#endif
+
+	/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+__initcall(smsc_superio_setup);
+
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
+{
+	if (port < 0x400) {
+		extern unsigned long smsc_superio_virt;
+		return (void __iomem *)((port << 2) | smsc_superio_virt);
+	}
+
+	return (void __iomem *)port;
+}
+
+extern void init_cayman_irq(void);
+
+static struct sh_machine_vector mv_cayman __initmv = {
+	.mv_name		= "Hitachi Cayman",
+	.mv_nr_irqs		= 64,
+	.mv_ioport_map		= cayman_ioport_map,
+	.mv_init_irq		= init_cayman_irq,
+};
diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
index 7b97546c7e5..7b97546c7e5 100644
--- a/arch/sh/boards/dreamcast/Makefile
+++ b/arch/sh/boards/mach-dreamcast/Makefile
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
new file mode 100644
index 00000000000..67bdc33dd41
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -0,0 +1,153 @@
+/*
+ * arch/sh/boards/dreamcast/irq.c
+ *
+ * Holly IRQ support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ * Released under the terms of the GNU GPL v2.0
+ */
+
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/sysasic.h>
+
+/* Dreamcast System ASIC Hardware Events -
+
+   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+   hardware events from system peripherals and triggering an SH7750 IRQ.
+   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+   set in the Event Mask Registers (EMRs).  When a hardware event is
+   triggered, it's corresponding bit in the Event Status Registers (ESRs)
+   is set, and that bit should be rewritten to the ESR to acknowledge that
+   event.
+
+   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
+   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
+   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
+   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
+   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
+
+   In the kernel, these events are mapped to virtual IRQs so that drivers can
+   respond to them as they would a normal interrupt.  In order to keep this
+   mapping simple, the events are mapped as:
+
+   6900/6910 - Events  0-31, IRQ 13
+   6904/6924 - Events 32-63, IRQ 11
+   6908/6938 - Events 64-95, IRQ  9
+
+*/
+
+#define ESR_BASE 0x005f6900    /* Base event status register */
+#define EMR_BASE 0x005f6910    /* Base event mask register */
+
+/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+   1 = 0x6920, 2 = 0x6930; also determine the event offset */
+#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
+
+/* Return the hardware event's bit positon within the EMR/ESR */
+#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
+
+/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+   (logically mapped to the corresponding bit for the hardware event). */
+
+/* Disable the hardware event by masking its bit in its EMR */
+static inline void disable_systemasic_irq(unsigned int irq)
+{
+        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+        __u32 mask;
+
+        mask = inl(emr);
+        mask &= ~(1 << EVENT_BIT(irq));
+        outl(mask, emr);
+}
+
+/* Enable the hardware event by setting its bit in its EMR */
+static inline void enable_systemasic_irq(unsigned int irq)
+{
+        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+        __u32 mask;
+
+        mask = inl(emr);
+        mask |= (1 << EVENT_BIT(irq));
+        outl(mask, emr);
+}
+
+/* Acknowledge a hardware event by writing its bit back to its ESR */
+static void ack_systemasic_irq(unsigned int irq)
+{
+        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+        disable_systemasic_irq(irq);
+        outl((1 << EVENT_BIT(irq)), esr);
+}
+
+/* After a IRQ has been ack'd and responded to, it needs to be renabled */
+static void end_systemasic_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                enable_systemasic_irq(irq);
+}
+
+static unsigned int startup_systemasic_irq(unsigned int irq)
+{
+        enable_systemasic_irq(irq);
+
+        return 0;
+}
+
+static void shutdown_systemasic_irq(unsigned int irq)
+{
+        disable_systemasic_irq(irq);
+}
+
+struct hw_interrupt_type systemasic_int = {
+        .typename       = "System ASIC",
+        .startup        = startup_systemasic_irq,
+        .shutdown       = shutdown_systemasic_irq,
+        .enable         = enable_systemasic_irq,
+        .disable        = disable_systemasic_irq,
+        .ack            = ack_systemasic_irq,
+        .end            = end_systemasic_irq,
+};
+
+/*
+ * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
+ */
+int systemasic_irq_demux(int irq)
+{
+        __u32 emr, esr, status, level;
+        __u32 j, bit;
+
+        switch (irq) {
+                case 13:
+                        level = 0;
+                        break;
+                case 11:
+                        level = 1;
+                        break;
+                case  9:
+                        level = 2;
+                        break;
+                default:
+                        return irq;
+        }
+        emr = EMR_BASE + (level << 4) + (level << 2);
+        esr = ESR_BASE + (level << 2);
+
+        /* Mask the ESR to filter any spurious, unwanted interrupts */
+        status = inl(esr);
+        status &= inl(emr);
+
+        /* Now scan and find the first set bit as the event to map */
+        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+                if (status & bit) {
+                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+                        return irq;
+                }
+        }
+
+        /* Not reached */
+        return irq;
+}
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
new file mode 100644
index 00000000000..a7433685798
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/boards/dreamcast/rtc.c
+ *
+ * Dreamcast AICA RTC routines.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+
+#include <linux/time.h>
+#include <asm/rtc.h>
+#include <asm/io.h>
+
+/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
+   seconds) to get the standard Unix Epoch when getting the time, and add
+   20 years when setting the time. */
+#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
+
+/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
+   registers.*/
+#define AICA_RTC_SECS_H		0xa0710000
+#define AICA_RTC_SECS_L		0xa0710004
+
+/**
+ * aica_rtc_gettimeofday - Get the time from the AICA RTC
+ * @ts: pointer to resulting timespec
+ *
+ * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
+ */
+static void aica_rtc_gettimeofday(struct timespec *ts)
+{
+	unsigned long val1, val2;
+
+	do {
+		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+
+		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+	} while (val1 != val2);
+
+	ts->tv_sec = val1 - TWENTY_YEARS;
+
+	/* Can't get nanoseconds with just a seconds counter. */
+	ts->tv_nsec = 0;
+}
+
+/**
+ * aica_rtc_settimeofday - Set the AICA RTC to the current time
+ * @secs: contains the time_t to set
+ *
+ * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
+ */
+static int aica_rtc_settimeofday(const time_t secs)
+{
+	unsigned long val1, val2;
+	unsigned long adj = secs + TWENTY_YEARS;
+
+	do {
+		ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+		ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
+
+		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+
+		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+	} while (val1 != val2);
+
+	return 0;
+}
+
+void aica_time_init(void)
+{
+	rtc_sh_get_time = aica_rtc_gettimeofday;
+	rtc_sh_set_time = aica_rtc_settimeofday;
+}
+
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
new file mode 100644
index 00000000000..7d944fc75e9
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -0,0 +1,64 @@
+/*
+ * arch/sh/boards/dreamcast/setup.c
+ *
+ * Hardware support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
+ *	SEGA Dreamcast support
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/rtc.h>
+#include <asm/machvec.h>
+#include <mach/sysasic.h>
+
+extern struct hw_interrupt_type systemasic_int;
+extern void aica_time_init(void);
+extern int gapspci_init(void);
+extern int systemasic_irq_demux(int);
+
+static void __init dreamcast_setup(char **cmdline_p)
+{
+	int i;
+
+	/* Mask all hardware events */
+	/* XXX */
+
+	/* Acknowledge any previous events */
+	/* XXX */
+
+	__set_io_port_base(0xa0000000);
+
+	/* Assign all virtual IRQs to the System ASIC int. handler */
+	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
+		irq_desc[i].chip = &systemasic_int;
+
+	board_time_init = aica_time_init;
+
+#ifdef CONFIG_PCI
+	if (gapspci_init() < 0)
+		printk(KERN_WARNING "GAPSPCI was not detected.\n");
+#endif
+}
+
+static struct sh_machine_vector mv_dreamcast __initmv = {
+	.mv_name		= "Sega Dreamcast",
+	.mv_setup		= dreamcast_setup,
+	.mv_irq_demux		= systemasic_irq_demux,
+};
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd531f11..14bdd531f11 100644
--- a/arch/sh/boards/renesas/edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 541cea2a652..541cea2a652 100644
--- a/arch/sh/boards/renesas/edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index f076c45308d..f076c45308d 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index fc8f28e04ba..fc8f28e04ba 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile
index 20a10080b11..20a10080b11 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/mach-highlander/Makefile
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index ae1cfcb2970..ae1cfcb2970 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index 9d3921fe27c..9d3921fe27c 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 896c045aa39..896c045aa39 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
new file mode 100644
index 00000000000..be8d5477fc6
--- /dev/null
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -0,0 +1,122 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/psw.c
+ *
+ * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/r7780rp.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int l, mask;
+	int ret = 0;
+
+	l = ctrl_inw(PA_DBSW);
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	mask = l & 0x70;
+	/* Figure out who raised it */
+	if (mask & (1 << psw_info->bit)) {
+		psw->state = !!(mask & (1 << psw_info->bit));
+		if (psw->state)	/* debounce */
+			mod_timer(&psw->debounce, jiffies + 50);
+
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	l |= (0x7 << 12);
+	ctrl_outw(l, PA_DBSW);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_resources[] = {
+	[0] = {
+		.start	= IRQ_PSW,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info s2_platform_data = {
+	.name		= "s2",
+	.bit		= 6,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s2_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s2_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s3_platform_data = {
+	.name		= "s3",
+	.bit		= 5,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s3_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s3_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s4_platform_data = {
+	.name		= "s4",
+	.bit		= 4,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s4_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s4_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&s2_switch_device, &s3_switch_device, &s4_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c
index bc79afb6fc4..bc79afb6fc4 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
index b3124278247..b3124278247 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/mach-hp6xx/Makefile
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index 177f4f028e0..177f4f028e0 100644
--- a/arch/sh/boards/hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
new file mode 100644
index 00000000000..e96684def78
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -0,0 +1,81 @@
+/*
+ * hp6x0 Power Management Routines
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <asm/io.h>
+#include <asm/hd64461.h>
+#include <asm/hp6xx.h>
+#include <cpu/dac.h>
+#include <asm/pm.h>
+
+#define STBCR		0xffffff82
+#define STBCR2		0xffffff88
+
+static int hp6x0_pm_enter(suspend_state_t state)
+{
+	u8 stbcr, stbcr2;
+#ifdef CONFIG_HD64461_ENABLER
+	u8 scr;
+	u16 hd64461_stbcr;
+#endif
+
+#ifdef CONFIG_HD64461_ENABLER
+	outb(0, HD64461_PCC1CSCIER);
+
+	scr = inb(HD64461_PCC1SCR);
+	scr |= HD64461_PCCSCR_VCC1;
+	outb(scr, HD64461_PCC1SCR);
+
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr |= HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+#endif
+
+	ctrl_outb(0x1f, DACR);
+
+	stbcr = ctrl_inb(STBCR);
+	ctrl_outb(0x01, STBCR);
+
+	stbcr2 = ctrl_inb(STBCR2);
+	ctrl_outb(0x7f , STBCR2);
+
+	outw(0xf07f, HD64461_SCPUCR);
+
+	pm_enter();
+
+	outw(0, HD64461_SCPUCR);
+	ctrl_outb(stbcr, STBCR);
+	ctrl_outb(stbcr2, STBCR2);
+
+#ifdef CONFIG_HD64461_ENABLER
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+
+	outb(0x4c, HD64461_PCC1CSCIER);
+	outb(0x00, HD64461_PCC1CSCR);
+#endif
+
+	return 0;
+}
+
+static struct platform_suspend_ops hp6x0_pm_ops = {
+	.enter		= hp6x0_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int __init hp6x0_pm_init(void)
+{
+	suspend_set_ops(&hp6x0_pm_ops);
+	return 0;
+}
+
+late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
new file mode 100644
index 00000000000..44b648cf6f2
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <cpu/mmu_context.h>
+
+#define k0	r0
+#define k1	r1
+#define k2	r2
+#define k3	r3
+#define k4	r4
+
+/*
+ * Kernel mode register usage:
+ *	k0	scratch
+ *	k1	scratch
+ *	k2	scratch (Exception code)
+ *	k3	scratch (Return address)
+ *	k4	scratch
+ *	k5	reserved
+ *	k6	Global Interrupt Mask (0--15 << 4)
+ *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
+ */
+
+ENTRY(wakeup_start)
+! clear STBY bit
+	mov	#-126, k2
+   	and	#127, k0
+	mov.b	k0, @k2
+! enable refresh
+	mov.l	5f, k1
+	mov.w	6f, k0
+  	mov.w	k0, @k1
+! jump to handler
+	mov.l	2f, k2
+	mov.l	3f, k3
+	mov.l	@k2, k2
+
+	mov.l	4f, k1
+	jmp	@k1
+	nop
+
+	.align	2
+1:	.long	EXPEVT
+2:	.long	INTEVT
+3:	.long	ret_from_irq
+4:	.long	handle_exception
+5:	.long	0xffffff68
+6:	.word	0x0524
+
+ENTRY(wakeup_end)
+	nop
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
new file mode 100644
index 00000000000..475b46caec1
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -0,0 +1,121 @@
+/*
+ * linux/arch/sh/boards/hp6xx/setup.c
+ *
+ * Copyright (C) 2002 Andriy Skulysh
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/hd64461.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hp6xx.h>
+#include <cpu/dac.h>
+
+#define	SCPCR	0xa4000116
+#define	SCPDR	0xa4000136
+
+/* CF Slot */
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start = 0x15000000 + 0x1f0,
+		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 0x15000000 + 0x1fe,
+		.end   = 0x15000000 + 0x1fe + 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = 77,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		=  "pata_platform",
+	.id		=  -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device jornadakbd_device = {
+	.name		= "jornada680_kbd",
+	.id		= -1,
+};
+
+static struct platform_device *hp6xx_devices[] __initdata = {
+	&cf_ide_device,
+	&jornadakbd_device,
+};
+
+static void __init hp6xx_init_irq(void)
+{
+	/* Gets touchscreen and powerbutton IRQ working */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static int __init hp6xx_devices_setup(void)
+{
+	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
+}
+
+static void __init hp6xx_setup(char **cmdline_p)
+{
+	u8 v8;
+	u16 v;
+
+	v = inw(HD64461_STBCR);
+	v |=	HD64461_STBCR_SURTST | HD64461_STBCR_SIRST	|
+		HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST	|
+		HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST	|
+		HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
+		HD64461_STBCR_SAFECKE_IST;
+#ifndef CONFIG_HD64461_ENABLER
+	v |= HD64461_STBCR_SPC1ST;
+#endif
+	outw(v, HD64461_STBCR);
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
+	outw(v, HD64461_GPADR);
+
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
+
+#ifndef CONFIG_HD64461_ENABLER
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
+#endif
+
+	sh_dac_output(0, DAC_SPEAKER_VOLUME);
+	sh_dac_disable(DAC_SPEAKER_VOLUME);
+	v8 = ctrl_inb(DACR);
+	v8 &= ~DACR_DAE;
+	ctrl_outb(v8,DACR);
+
+	v8 = ctrl_inb(SCPDR);
+	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+	v8 &= ~SCPDR_TS_SCAN_ENABLE;
+	ctrl_outb(v8, SCPDR);
+
+	v = ctrl_inw(SCPCR);
+	v &= ~SCPCR_TS_MASK;
+	v |= SCPCR_TS_ENABLE;
+	ctrl_outw(v, SCPCR);
+}
+device_initcall(hp6xx_devices_setup);
+
+static struct sh_machine_vector mv_hp6xx __initmv = {
+	.mv_name = "hp6xx",
+	.mv_setup = hp6xx_setup,
+	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
+	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
+	.mv_irq_demux = hd64461_irq_demux,
+	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
+	.mv_init_irq = hp6xx_init_irq,
+};
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
index a696b4277fa..a696b4277fa 100644
--- a/arch/sh/boards/landisk/Makefile
+++ b/arch/sh/boards/mach-landisk/Makefile
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
new file mode 100644
index 00000000000..25cdf735800
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -0,0 +1,171 @@
+/*
+ * arch/sh/boards/landisk/gio.c - driver for landisk
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ * LANDISK and USL-5P Button, LED and GIO driver drive function.
+ *
+ *   Copylight (C) 2006 kogiidena
+ *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/kdev_t.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+#define DEVCOUNT                4
+#define GIO_MINOR	        2	/* GIO minor no. */
+
+static dev_t dev;
+static struct cdev *cdev_p;
+static int openCnt;
+
+static int gio_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+	int ret = -ENOENT;
+
+	lock_kernel();
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		if (openCnt > 0) {
+			ret = -EALREADY;
+		} else {
+			openCnt++;
+			ret = 0;
+		}
+	}
+	unlock_kernel();
+	return ret;
+}
+
+static int gio_close(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		openCnt--;
+	}
+	return 0;
+}
+
+static int gio_ioctl(struct inode *inode, struct file *filp,
+			     unsigned int cmd, unsigned long arg)
+{
+	unsigned int data;
+	static unsigned int addr = 0;
+
+	if (cmd & 0x01) {	/* write */
+		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+
+	switch (cmd) {
+	case GIODRV_IOCSGIOSETADDR:	/* address set */
+		addr = data;
+		break;
+
+	case GIODRV_IOCSGIODATA1:	/* write byte */
+		ctrl_outb((unsigned char)(0x0ff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA2:	/* write word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA4:	/* write long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		ctrl_outl(data, addr);
+		break;
+
+	case GIODRV_IOCGGIODATA1:	/* read byte */
+		data = ctrl_inb(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA2:	/* read word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		data = ctrl_inw(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA4:	/* read long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		data = ctrl_inl(addr);
+		break;
+	default:
+		return -EFAULT;
+		break;
+	}
+
+	if ((cmd & 0x01) == 0) {	/* read */
+		if (copy_to_user((int *)arg, &data, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+static const struct file_operations gio_fops = {
+	.owner = THIS_MODULE,
+	.open = gio_open,	/* open */
+	.release = gio_close,	/* release */
+	.ioctl = gio_ioctl,	/* ioctl */
+};
+
+static int __init gio_init(void)
+{
+	int error;
+
+	printk(KERN_INFO "gio: driver initialized\n");
+
+	openCnt = 0;
+
+	if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
+		printk(KERN_ERR
+		       "gio: Couldn't alloc_chrdev_region, error=%d\n",
+		       error);
+		return 1;
+	}
+
+	cdev_p = cdev_alloc();
+	cdev_p->ops = &gio_fops;
+	error = cdev_add(cdev_p, dev, DEVCOUNT);
+	if (error) {
+		printk(KERN_ERR
+		       "gio: Couldn't cdev_add, error=%d\n", error);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __exit gio_exit(void)
+{
+	cdev_del(cdev_p);
+	unregister_chrdev_region(dev, DEVCOUNT);
+}
+
+module_init(gio_init);
+module_exit(gio_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
new file mode 100644
index 00000000000..7b284cde1f5
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -0,0 +1,56 @@
+/*
+ * arch/sh/boards/landisk/irq.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support
+ *
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+static void disable_landisk_irq(unsigned int irq)
+{
+	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
+
+	ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
+}
+
+static void enable_landisk_irq(unsigned int irq)
+{
+	unsigned char value = (0x01 << (irq - 5));
+
+	ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
+}
+
+static struct irq_chip landisk_irq_chip __read_mostly = {
+	.name		= "LANDISK",
+	.mask		= disable_landisk_irq,
+	.unmask		= enable_landisk_irq,
+	.mask_ack	= disable_landisk_irq,
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+	int i;
+
+	for (i = 5; i < 14; i++) {
+		disable_irq_nosync(i);
+		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
+					      handle_level_irq, "level");
+		enable_landisk_irq(i);
+	}
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
new file mode 100644
index 00000000000..e6b0efa098d
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -0,0 +1,143 @@
+/*
+ * arch/sh/boards/landisk/psw.c
+ *
+ * push switch support for LANDISK and USL-5P
+ *
+ * Copyright (C) 2006-2007  Paul Mundt
+ * Copyright (C) 2007  kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int sw_value;
+	int ret = 0;
+
+	sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	/* Figure out who raised it */
+	if (sw_value & (1 << psw_info->bit)) {
+		psw->state = 1;
+		mod_timer(&psw->debounce, jiffies + 50);
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_power_resources[] = {
+	[0] = {
+		.start = IRQ_POWER,
+		.flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource psw_usl5p_resources[] = {
+	[0] = {
+		.start = IRQ_BUTTON,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info psw_power_platform_data = {
+	.name		= "psw_power",
+	.bit		= 4,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw1_platform_data = {
+	.name		= "psw1",
+	.bit		= 0,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw2_platform_data = {
+	.name		= "psw2",
+	.bit		= 2,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw3_platform_data = {
+	.name		= "psw3",
+	.bit		= 1,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device psw_power_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_power_resources),
+	.resource	= psw_power_resources,
+	.dev		= {
+		.platform_data = &psw_power_platform_data,
+	},
+};
+
+static struct platform_device psw1_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw1_platform_data,
+	},
+};
+
+static struct platform_device psw2_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw2_platform_data,
+	},
+};
+
+static struct platform_device psw3_switch_device = {
+	.name		= "push-switch",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev = {
+		.platform_data = &psw3_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&psw_power_switch_device,
+	&psw1_switch_device,
+	&psw2_switch_device,
+	&psw3_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
new file mode 100644
index 00000000000..db22ea2e6d4
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <asm/machvec.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/io.h>
+
+void init_landisk_IRQ(void);
+
+static void landisk_power_off(void)
+{
+        ctrl_outb(0x01, PA_SHUTDOWN);
+}
+
+static struct resource cf_ide_resources[3];
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev		= {
+		.platform_data = &pata_info,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "rs5c313",
+	.id		= -1,
+};
+
+static struct platform_device *landisk_devices[] __initdata = {
+	&cf_ide_device,
+	&rtc_device,
+};
+
+static int __init landisk_devices_setup(void)
+{
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
+	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
+	cf_ide_resources[0].flags = IORESOURCE_IO;
+	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
+	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
+	cf_ide_resources[1].flags = IORESOURCE_IO;
+	cf_ide_resources[2].start = IRQ_FATA;
+	cf_ide_resources[2].flags = IORESOURCE_IRQ;
+
+	return platform_add_devices(landisk_devices,
+				    ARRAY_SIZE(landisk_devices));
+}
+
+__initcall(landisk_devices_setup);
+
+static void __init landisk_setup(char **cmdline_p)
+{
+        /* LED ON */
+	ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
+
+	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+	pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_landisk __initmv = {
+	.mv_name = "LANDISK",
+	.mv_nr_irqs = 72,
+	.mv_setup = landisk_setup,
+	.mv_init_irq = init_landisk_IRQ,
+};
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
index e9ed140c06f..e9ed140c06f 100644
--- a/arch/sh/boards/lboxre2/Makefile
+++ b/arch/sh/boards/mach-lboxre2/Makefile
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
index 5a1c3bbe7b5..5a1c3bbe7b5 100644
--- a/arch/sh/boards/lboxre2/irq.c
+++ b/arch/sh/boards/mach-lboxre2/irq.c
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index c74440d38ee..c74440d38ee 100644
--- a/arch/sh/boards/lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
index 1387dd6c85e..1387dd6c85e 100644
--- a/arch/sh/boards/superh/microdev/Makefile
+++ b/arch/sh/boards/mach-microdev/Makefile
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 9f8a540f7e1..9f8a540f7e1 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 4d335077a3f..4d335077a3f 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c
index 36e54b47a75..36e54b47a75 100644
--- a/arch/sh/boards/superh/microdev/led.c
+++ b/arch/sh/boards/mach-microdev/led.c
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index fc8cd06d66c..fc8cd06d66c 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
new file mode 100644
index 00000000000..a7b3b728ec3
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Kconfig
@@ -0,0 +1,15 @@
+if SH_MIGOR
+
+choice
+	prompt "Migo-R LCD Panel Board Selection"
+	default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+	bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+	bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
new file mode 100644
index 00000000000..5f231dd25c0
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o
+obj-$(CONFIG_SH_MIGOR_QVGA)	+=  lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
new file mode 100644
index 00000000000..6e960959644
--- /dev/null
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -0,0 +1,165 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+	ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+	mdelay(2);
+	ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+	mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+	unsigned long tmp1, tmp2;
+
+	tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+	tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+	return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+		       unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+			struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+				unsigned short reg)
+{
+	unsigned long data;
+
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	data = sys_ops->read_data(sys_ops_handle);
+	return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			       unsigned short const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i += 2)
+		write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+	0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+	0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+	0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+	0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+	0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+	0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+	0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+	0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+	0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+	0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+	0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long xres = 320;
+	unsigned long yres = 240;
+	int k;
+
+	reset_lcd_module();
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+	if (read_reg16(sohandle, so, 0) != 0x1505)
+		return -ENODEV;
+
+	pr_info("Migo-R QVGA LCD Module detected.\n");
+
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+	write_reg16(sohandle, so, 0x00A4, 0x0001);
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+	mdelay(100);
+
+	migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+	write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+	write_reg16(sohandle, so, 0x0051, 0x00ef);
+	write_reg16(sohandle, so, 0x0052, 0x0000);
+	write_reg16(sohandle, so, 0x0053, xres - 1);
+
+	migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+	mdelay(40);
+
+	/* clear GRAM to avoid displaying garbage */
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+	for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+		write_reg16(sohandle, so, 0x0022, 0x0000);
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+	write_reg16(sohandle, so, 0x0007, 0x0173);
+	mdelay(40);
+
+	/* enable display */
+	write_reg(sohandle, so, 0x00, 0x22);
+	mdelay(100);
+	return 0;
+}
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
new file mode 100644
index 00000000000..714dce91cc9
--- /dev/null
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -0,0 +1,535 @@
+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* Address     IRQ  Size  Bus  Description
+ * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
+ * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
+ * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
+ * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
+ * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
+ */
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x10000300,
+		.end    = 0x1000030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 32, /* IRQ0 */
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = {
+		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
+		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
+		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "rootfs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (15 * 1024 * 1024),
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+	.width		= 2,
+	.parts		= migor_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device migor_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= migor_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nor_flash_data,
+	},
+};
+
+static struct mtd_partition migor_nand_flash_partitions[] = {
+	{
+		.name		= "nanddata1",
+		.offset		= 0x0,
+		.size		= 512 * 1024 * 1024,
+	},
+	{
+		.name		= "nanddata2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024 * 1024,
+	},
+};
+
+static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
+				     unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
+	else
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct mtd_info *mtd)
+{
+	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
+}
+
+struct platform_nand_data migor_nand_flash_data = {
+	.chip = {
+		.nr_chips = 1,
+		.partitions = migor_nand_flash_partitions,
+		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+		.chip_delay = 20,
+		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
+	},
+	.ctrl = {
+		.dev_ready = migor_nand_flash_ready,
+		.cmd_ctrl = migor_nand_flash_cmd_ctl,
+	},
+};
+
+static struct resource migor_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x18000000,
+		.end		= 0x18ffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_nand_flash_device = {
+	.name		= "gen_nand",
+	.resource	= migor_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nand_flash_data,
+	}
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB16,
+		.clock_divider = 2,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 64,
+			.right_margin = 16,
+			.hsync_len = 120,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = 0,
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS16A,
+		.clock_divider = 10,
+		.lcd_cfg = {
+			.name = "PH240320T",
+			.xres = 320,
+			.yres = 240,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = FB_SYNC_HOR_HIGH_ACT,
+		},
+		.lcd_size_cfg = { /* 2.4 inch */
+			.width = 49,
+			.height = 37,
+		},
+		.board_cfg = {
+			.setup_sys = migor_lcd_qvga_setup,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x06000a09,
+			.ldmt3r = 0x180e3418,
+		},
+	}
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(migor_lcdc_resources),
+	.resource	= migor_lcdc_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc_info,
+	},
+};
+
+static struct clk *camera_clk;
+
+static void camera_power_on(void)
+{
+	unsigned char value;
+
+	camera_clk = clk_get(NULL, "video_clk");
+	clk_set_rate(camera_clk, 24000000);
+	clk_enable(camera_clk);	/* start VIO_CKO */
+
+	mdelay(10);
+	value = ctrl_inb(PORT_PTDR);
+	value &= ~0x09;
+#ifndef CONFIG_SH_MIGOR_RTA_WVGA
+	value |= 0x01;
+#endif
+	ctrl_outb(value, PORT_PTDR);
+	mdelay(10);
+
+	ctrl_outb(value | 8, PORT_PTDR);
+}
+
+static void camera_power_off(void)
+{
+	clk_disable(camera_clk); /* stop VIO_CKO */
+	clk_put(camera_clk);
+
+	ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+}
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ov772x_magic[] =
+{
+	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
+	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
+	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
+	0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
+	0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
+	0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
+	0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
+	0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
+	0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
+	0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
+	0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
+	0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
+	0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
+	0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
+	0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
+	0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
+	0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
+	0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
+	0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
+	0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
+	0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
+	0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
+	0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
+	0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
+	0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
+	0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
+	0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
+	0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
+	0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
+	0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
+	0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
+	0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
+	0x2c, 0x78,
+};
+
+static int ov772x_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* camera_power_off() is enough */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x21;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ov772x_magic[i];
+		buf[1] = camera_ov772x_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info ov772x_info = {
+	.iface = 0,
+	.format_name = "RGB565",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_RGB565,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.width = 320,
+		.height = 240,
+	},
+	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = ov772x_set_capture,
+};
+
+static struct platform_device migor_camera_device = {
+	.name		= "soc_camera_platform",
+	.dev	= {
+		.platform_data	= &ov772x_info,
+	},
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
+	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
+	.enable_camera = camera_power_on,
+	.disable_camera = camera_power_off,
+};
+
+static struct resource migor_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device migor_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
+	.resource	= migor_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+#ifdef CONFIG_I2C
+	&migor_camera_device,
+#endif
+	&migor_nor_flash_device,
+	&migor_nand_flash_device,
+};
+
+static struct i2c_board_info migor_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("migor_ts", 0x51),
+		.irq = 38, /* IRQ6 */
+	},
+};
+
+static int __init migor_devices_setup(void)
+{
+	clk_always_enable("mstp214"); /* KEYSC */
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
+	i2c_register_board_info(0, migor_i2c_devices,
+				ARRAY_SIZE(migor_i2c_devices));
+ 
+	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+__initcall(migor_devices_setup);
+
+static void __init migor_setup(char **cmdline_p)
+{
+	/* SMC91C111 - Enable IRQ0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
+
+	/* KEYSC */
+	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+
+	/* NAND Flash */
+	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
+	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
+		  BSC_CS6ABCR);
+
+	/* Touch Panel - Enable IRQ6 */
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
+	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
+	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	/* LCDC - WVGA - Enable RGB Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw(0x0000, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	/* LCDC - QVGA - Enable SYS Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+
+	/* CEU */
+	ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
+	ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
+	ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
+	ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
+	ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
+}
+
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_setup		= migor_setup,
+};
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
index 8122a9667fc..8122a9667fc 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Kconfig
+++ b/arch/sh/boards/mach-r2d/Kconfig
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
index 0d4c75a72be..0d4c75a72be 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Makefile
+++ b/arch/sh/boards/mach-r2d/Makefile
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 8e49f6e5124..8e49f6e5124 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index 2308e8753bc..2308e8753bc 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
index 065f1df09bf..065f1df09bf 100644
--- a/arch/sh/boards/renesas/sdk7780/Kconfig
+++ b/arch/sh/boards/mach-sdk7780/Kconfig
diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
index 3d8f0befc35..3d8f0befc35 100644
--- a/arch/sh/boards/renesas/sdk7780/Makefile
+++ b/arch/sh/boards/mach-sdk7780/Makefile
diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 87cdc578f6f..87cdc578f6f 100644
--- a/arch/sh/boards/renesas/sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index acc5932587f..acc5932587f 100644
--- a/arch/sh/boards/renesas/sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed699f3..63e7ed699f3 100644
--- a/arch/sh/boards/se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
new file mode 100644
index 00000000000..9c3a33210d6
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -0,0 +1,104 @@
+/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
+ *
+ * linux/arch/sh/boards/se/7206/io.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * I/O routine for Hitachi 7206 SolutionEngine.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7206.h>
+
+
+static inline void delay(void)
+{
+	ctrl_inw(0x20000000);  /* P2 ROM Area */
+}
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+	if (port >= 0x2000 && port < 0x2020)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	else if (port >= 0x300 && port < 0x310)
+		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
+
+	return (volatile __u16 *)port;
+}
+
+unsigned char se7206_inb(unsigned long port)
+{
+	return (*port2adr(port)) & 0xff;
+}
+
+unsigned char se7206_inb_p(unsigned long port)
+{
+	unsigned long v;
+
+	v = (*port2adr(port)) & 0xff;
+	delay();
+	return v;
+}
+
+unsigned short se7206_inw(unsigned long port)
+{
+	return *port2adr(port);;
+}
+
+void se7206_outb(unsigned char value, unsigned long port)
+{
+	*(port2adr(port)) = value;
+}
+
+void se7206_outb_p(unsigned char value, unsigned long port)
+{
+	*(port2adr(port)) = value;
+	delay();
+}
+
+void se7206_outw(unsigned short value, unsigned long port)
+{
+	*port2adr(port) = value;
+}
+
+void se7206_insb(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
+
+	while (count--)
+		*ap++ = *p;
+}
+
+void se7206_insw(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
+	while (count--)
+		*ap++ = *p;
+}
+
+void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
+
+	while (count--)
+		*p = *ap++;
+}
+
+void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
+	while (count--)
+		*p = *ap++;
+}
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
new file mode 100644
index 00000000000..aef7f052851
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -0,0 +1,146 @@
+/*
+ * linux/arch/sh/boards/se/7206/irq.c
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <mach-se/mach/se7206.h>
+
+#define INTSTS0 0x31800000
+#define INTSTS1 0x31800002
+#define INTMSK0 0x31800004
+#define INTMSK1 0x31800006
+#define INTSEL  0x31800008
+
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1  0xfffe0802
+
+static void disable_se7206_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set the priority in IPR to 0 */
+	val = ctrl_inw(INTC_IPR01);
+	val &= mask;
+	ctrl_outw(val, INTC_IPR01);
+	/* FPGA mask set */
+	msk0 = ctrl_inw(INTMSK0);
+	msk1 = ctrl_inw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 |= 0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 |= 0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 |= 0x0f00;
+		msk1 |= 0x00ff;
+		break;
+	}
+	ctrl_outw(msk0, INTMSK0);
+	ctrl_outw(msk1, INTMSK1);
+}
+
+static void enable_se7206_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set priority in IPR back to original value */
+	val = ctrl_inw(INTC_IPR01);
+	val |= value;
+	ctrl_outw(val, INTC_IPR01);
+
+	/* FPGA mask reset */
+	msk0 = ctrl_inw(INTMSK0);
+	msk1 = ctrl_inw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 &= ~0x0f00;
+		msk1 &= ~0x00ff;
+		break;
+	}
+	ctrl_outw(msk0, INTMSK0);
+	ctrl_outw(msk1, INTMSK1);
+}
+
+static void eoi_se7206_irq(unsigned int irq)
+{
+	unsigned short sts0,sts1;
+
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_se7206_irq(irq);
+	/* FPGA isr clear */
+	sts0 = ctrl_inw(INTSTS0);
+	sts1 = ctrl_inw(INTSTS1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		sts0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		sts0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		sts0 &= ~0x0f00;
+		sts1 &= ~0x00ff;
+		break;
+	}
+	ctrl_outw(sts0, INTSTS0);
+	ctrl_outw(sts1, INTSTS1);
+}
+
+static struct irq_chip se7206_irq_chip __read_mostly = {
+	.name		= "SE7206-FPGA",
+	.mask		= disable_se7206_irq,
+	.unmask		= enable_se7206_irq,
+	.mask_ack	= disable_se7206_irq,
+	.eoi		= eoi_se7206_irq,
+};
+
+static void make_se7206_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
+				      handle_level_irq, "level");
+	disable_se7206_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7206_IRQ(void)
+{
+	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
+	make_se7206_irq(IRQ1_IRQ); /* ATA */
+	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
+	ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+	/* FPGA System register setup*/
+	ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
+	ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
+	ctrl_outw(0x0001,INTSEL);
+}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
new file mode 100644
index 00000000000..f5466384972
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -0,0 +1,108 @@
+/*
+ *
+ * linux/arch/sh/boards/se/7206/setup.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ * Copyright (C) 2007 - 2008  Paul Mundt
+ *
+ * Hitachi 7206 SolutionEngine Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <mach-se/mach/se7206.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name		= "smc91x-regs",
+		.start		= PA_SMSC + 0x300,
+		.end		= PA_SMSC + 0x300 + 0x020 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 32,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+};
+
+static int __init se7206_devices_setup(void)
+{
+	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
+}
+__initcall(se7206_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_nr_irqs		= 256,
+	.mv_inb			= se7206_inb,
+	.mv_inw			= se7206_inw,
+	.mv_outb		= se7206_outb,
+	.mv_outw		= se7206_outw,
+
+	.mv_inb_p		= se7206_inb_p,
+	.mv_inw_p		= se7206_inw,
+	.mv_outb_p		= se7206_outb_p,
+	.mv_outw_p		= se7206_outw,
+
+	.mv_insb		= se7206_insb,
+	.mv_insw		= se7206_insw,
+	.mv_outsb		= se7206_outsb,
+	.mv_outsw		= se7206_outsw,
+
+	.mv_init_irq		= init_se7206_IRQ,
+};
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
index 3024796c620..3024796c620 100644
--- a/arch/sh/boards/se/7343/Makefile
+++ b/arch/sh/boards/mach-se/7343/Makefile
diff --git a/arch/sh/boards/mach-se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
new file mode 100644
index 00000000000..8741abc1da7
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/io.c
@@ -0,0 +1,273 @@
+/*
+ * arch/sh/boards/se/7343/io.c
+ *
+ * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
+ *
+ */
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7343.h>
+
+#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
+
+struct iop {
+	unsigned long start, end;
+	unsigned long base;
+	struct iop *(*check) (struct iop * p, unsigned long port);
+	unsigned char (*inb) (struct iop * p, unsigned long port);
+	unsigned short (*inw) (struct iop * p, unsigned long port);
+	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
+	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
+};
+
+struct iop *
+simple_check(struct iop *p, unsigned long port)
+{
+	static int count;
+
+	if (count < 100)
+		count++;
+
+	port &= 0xFFFF;
+
+	if ((p->start <= port) && (port <= p->end))
+		return p;
+	else
+		badio(check, port);
+}
+
+struct iop *
+ide_check(struct iop *p, unsigned long port)
+{
+	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
+		return p;
+	return NULL;
+}
+
+unsigned char
+simple_inb(struct iop *p, unsigned long port)
+{
+	return *(unsigned char *) (p->base + port);
+}
+
+unsigned short
+simple_inw(struct iop *p, unsigned long port)
+{
+	return *(unsigned short *) (p->base + port);
+}
+
+void
+simple_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	*(unsigned char *) (p->base + port) = value;
+}
+
+void
+simple_outw(struct iop *p, unsigned short value, unsigned long port)
+{
+	*(unsigned short *) (p->base + port) = value;
+}
+
+unsigned char
+pcc_inb(struct iop *p, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+	unsigned long v;
+
+	if (port & 1)
+		addr += 0x00400000;
+	v = *(volatile unsigned char *) addr;
+	return v;
+}
+
+void
+pcc_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+
+	if (port & 1)
+		addr += 0x00400000;
+	*(volatile unsigned char *) addr = value;
+}
+
+unsigned char
+bad_inb(struct iop *p, unsigned long port)
+{
+	badio(inb, port);
+}
+
+void
+bad_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	badio(inw, port);
+}
+
+#ifdef CONFIG_SMC91X
+/* MSTLANEX01 LAN at 0xb400:0000 */
+static struct iop laniop = {
+	.start = 0x00,
+	.end = 0x0F,
+	.base = 0x04000000,
+	.check = simple_check,
+	.inb = simple_inb,
+	.inw = simple_inw,
+	.outb = simple_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_NE2000
+/* NE2000 pc card NIC */
+static struct iop neiop = {
+	.start = 0x280,
+	.end = 0x29f,
+	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
+	.check = simple_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_IDE
+/* CF in CF slot */
+static struct iop cfiop = {
+	.base = 0xb0600000,
+	.check = ide_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+static __inline__ struct iop *
+port2iop(unsigned long port)
+{
+	if (0) ;
+#if defined(CONFIG_SMC91X)
+	else if (laniop.check(&laniop, port))
+		return &laniop;
+#endif
+#if defined(CONFIG_NE2000)
+	else if (neiop.check(&neiop, port))
+		return &neiop;
+#endif
+#if defined(CONFIG_IDE)
+	else if (cfiop.check(&cfiop, port))
+		return &cfiop;
+#endif
+	else
+		return NULL;
+}
+
+static inline void
+delay(void)
+{
+	ctrl_inw(0xac000000);
+	ctrl_inw(0xac000000);
+}
+
+unsigned char
+sh7343se_inb(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inb) (p, port);
+}
+
+unsigned char
+sh7343se_inb_p(unsigned long port)
+{
+	unsigned char v = sh7343se_inb(port);
+	delay();
+	return v;
+}
+
+unsigned short
+sh7343se_inw(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inw) (p, port);
+}
+
+unsigned int
+sh7343se_inl(unsigned long port)
+{
+	badio(inl, port);
+}
+
+void
+sh7343se_outb(unsigned char value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outb) (p, value, port);
+}
+
+void
+sh7343se_outb_p(unsigned char value, unsigned long port)
+{
+	sh7343se_outb(value, port);
+	delay();
+}
+
+void
+sh7343se_outw(unsigned short value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outw) (p, value, port);
+}
+
+void
+sh7343se_outl(unsigned int value, unsigned long port)
+{
+	badio(outl, port);
+}
+
+void
+sh7343se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned char *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inb) (p, port);
+}
+
+void
+sh7343se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned short *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inw) (p, port);
+}
+
+void
+sh7343se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	badio(insl, port);
+}
+
+void
+sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned char *a = (unsigned char *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outb) (p, *a++, port);
+}
+
+void
+sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned short *a = (unsigned short *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outw) (p, *a++, port);
+}
+
+void
+sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	badio(outsw, port);
+}
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
new file mode 100644
index 00000000000..051c29d4eae
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -0,0 +1,79 @@
+/*
+ * linux/arch/sh/boards/se/7343/irq.c
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
+
+static void disable_se7343_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
+}
+
+static void enable_se7343_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
+}
+
+static struct irq_chip se7343_irq_chip __read_mostly = {
+	.name           = "SE7343-FPGA",
+	.mask           = disable_se7343_irq,
+	.unmask         = enable_se7343_irq,
+	.mask_ack       = disable_se7343_irq,
+};
+
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short intv = ctrl_inw(PA_CPLD_ST);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
+
+	intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+	int i;
+
+	ctrl_outw(0, PA_CPLD_IMSK);	/* disable all irqs */
+	ctrl_outw(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+					      &se7343_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
new file mode 100644
index 00000000000..486f40bf927
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -0,0 +1,152 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
+#include <asm/heartbeat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= 0x10000000,
+		.end	= 0x1000000F,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/*
+		 * shared with other devices via externel
+		 * interrupt controller in FPGA...
+		 */
+		.start	= SMC_IRQ,
+		.end	= SMC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+	&nor_flash_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
+}
+device_initcall(sh7343se_devices_setup);
+
+/*
+ * Initialize the board
+ */
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	ctrl_outw(0xf900, FPGA_OUT);	/* FPGA */
+
+	ctrl_outw(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_nr_irqs = 108,
+	.mv_inb = sh7343se_inb,
+	.mv_inw = sh7343se_inw,
+	.mv_inl = sh7343se_inl,
+	.mv_outb = sh7343se_outb,
+	.mv_outw = sh7343se_outw,
+	.mv_outl = sh7343se_outl,
+
+	.mv_inb_p = sh7343se_inb_p,
+	.mv_inw_p = sh7343se_inw,
+	.mv_inl_p = sh7343se_inl,
+	.mv_outb_p = sh7343se_outb_p,
+	.mv_outw_p = sh7343se_outw,
+	.mv_outl_p = sh7343se_outl,
+
+	.mv_insb = sh7343se_insb,
+	.mv_insw = sh7343se_insw,
+	.mv_insl = sh7343se_insl,
+	.mv_outsb = sh7343se_outsb,
+	.mv_outsw = sh7343se_outsw,
+	.mv_outsl = sh7343se_outsl,
+
+	.mv_init_irq = init_7343se_IRQ,
+};
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b06d5e..8e624b06d5e 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
new file mode 100644
index 00000000000..28833c8786e
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/io.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * I/O routine for Hitachi SolutionEngine.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+	if (port & 0xff000000)
+		return ( volatile __u16 *) port;
+	if (port >= 0x2000)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	else if (port >= 0x1000)
+		return (volatile __u16 *) (PA_83902 + (port << 1));
+	else
+		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
+}
+
+static inline int
+shifted_port(unsigned long port)
+{
+	/* For IDE registers, value is not shifted */
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		return 0;
+	else
+		return 1;
+}
+
+unsigned char se_inb(unsigned long port)
+{
+	if (shifted_port(port))
+		return (*port2adr(port) >> 8);
+	else
+		return (*port2adr(port))&0xff;
+}
+
+unsigned char se_inb_p(unsigned long port)
+{
+	unsigned long v;
+
+	if (shifted_port(port))
+		v = (*port2adr(port) >> 8);
+	else
+		v = (*port2adr(port))&0xff;
+	ctrl_delay();
+	return v;
+}
+
+unsigned short se_inw(unsigned long port)
+{
+	if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+unsigned int se_inl(unsigned long port)
+{
+	maybebadio(port);
+	return 0;
+}
+
+void se_outb(unsigned char value, unsigned long port)
+{
+	if (shifted_port(port))
+		*(port2adr(port)) = value << 8;
+	else
+		*(port2adr(port)) = value;
+}
+
+void se_outb_p(unsigned char value, unsigned long port)
+{
+	if (shifted_port(port))
+		*(port2adr(port)) = value << 8;
+	else
+		*(port2adr(port)) = value;
+	ctrl_delay();
+}
+
+void se_outw(unsigned short value, unsigned long port)
+{
+	if (port >= 0x2000)
+		*port2adr(port) = value;
+	else
+		maybebadio(port);
+}
+
+void se_outl(unsigned int value, unsigned long port)
+{
+	maybebadio(port);
+}
+
+void se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
+
+	if (shifted_port(port)) {
+		while (count--)
+			*ap++ = *p >> 8;
+	} else {
+		while (count--)
+			*ap++ = *p;
+	}
+}
+
+void se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
+	while (count--)
+		*ap++ = *p;
+}
+
+void se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
+
+void se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
+
+	if (shifted_port(port)) {
+		while (count--)
+			*p = *ap++ << 8;
+	} else {
+		while (count--)
+			*p = *ap++;
+	}
+}
+
+void se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
+
+	while (count--)
+		*p = *ap++;
+}
+
+void se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
new file mode 100644
index 00000000000..ec1fea571b5
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/sh/boards/se/770x/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/* This is default value */
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
+#else
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
+#if defined(CONFIG_STNIC)
+	/* ST NIC */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
+#endif
+	/* MRSHPC IRQs setting */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
+	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
+	/* NOTE: #2 and #13 are not used on PC */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se_IRQ(void)
+{
+	/* Disable all interrupts */
+	ctrl_outw(0, BCR_ILCRA);
+	ctrl_outw(0, BCR_ILCRB);
+	ctrl_outw(0, BCR_ILCRC);
+	ctrl_outw(0, BCR_ILCRD);
+	ctrl_outw(0, BCR_ILCRE);
+	ctrl_outw(0, BCR_ILCRF);
+	ctrl_outw(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
new file mode 100644
index 00000000000..9123d9687bf
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -0,0 +1,222 @@
+/*
+ * linux/arch/sh/boards/se/770x/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se.h>
+#include <asm/io.h>
+#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
+
+/*
+ * Configure the Super I/O chip
+ */
+static void __init smsc_config(int index, int data)
+{
+	outb_p(index, INDEX_PORT);
+	outb_p(data, DATA_PORT);
+}
+
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
+{
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+
+	/* FDC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
+
+	/* AUXIO (GPIO): to use IDE1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
+	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
+	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
+
+	/* COM1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x03);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
+
+	/* COM2 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x02);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
+
+	/* RTC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
+
+	/* XXX: PARPORT, KBD, and MOUSE will come here... */
+	outb_p(CONFIG_EXIT, CONFIG_PORT);
+}
+
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = IRQ_CFCARD,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh-eth",
+	.id	= 1,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+#endif
+
+static struct platform_device *se_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+	&sh_eth0_device,
+	&sh_eth1_device,
+#endif
+};
+
+static int __init se_devices_setup(void)
+{
+	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+device_initcall(se_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_setup		= smsc_setup,
+#if defined(CONFIG_CPU_SH4)
+	.mv_nr_irqs		= 48,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+	.mv_nr_irqs		= 32,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+	.mv_nr_irqs		= 61,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+	.mv_nr_irqs		= 86,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+	.mv_nr_irqs             = 104,
+#endif
+
+	.mv_inb			= se_inb,
+	.mv_inw			= se_inw,
+	.mv_inl			= se_inl,
+	.mv_outb		= se_outb,
+	.mv_outw		= se_outw,
+	.mv_outl		= se_outl,
+
+	.mv_inb_p		= se_inb_p,
+	.mv_inw_p		= se_inw,
+	.mv_inl_p		= se_inl,
+	.mv_outb_p		= se_outb_p,
+	.mv_outw_p		= se_outw,
+	.mv_outl_p		= se_outl,
+
+	.mv_insb		= se_insb,
+	.mv_insw		= se_insw,
+	.mv_insl		= se_insl,
+	.mv_outsb		= se_outsb,
+	.mv_outsw		= se_outsw,
+	.mv_outsl		= se_outsl,
+
+	.mv_init_irq		= init_se_IRQ,
+};
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
index 7f09030980b..7f09030980b 100644
--- a/arch/sh/boards/se/7721/Makefile
+++ b/arch/sh/boards/mach-se/7721/Makefile
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
new file mode 100644
index 00000000000..b417acc4dad
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
new file mode 100644
index 00000000000..d3fc80ff4d8
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7721.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	return platform_add_devices(se7721_devices,
+		ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
+	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
+	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
+	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_nr_irqs		= 109,
+	.mv_init_irq		= init_se7721_IRQ,
+};
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
index 8694373389e..8694373389e 100644
--- a/arch/sh/boards/se/7722/Makefile
+++ b/arch/sh/boards/mach-se/7722/Makefile
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
new file mode 100644
index 00000000000..02d21a3e2a8
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -0,0 +1,76 @@
+/*
+ * linux/arch/sh/boards/se/7722/irq.c
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7722.h>
+
+static void disable_se7722_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
+}
+
+static void enable_se7722_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
+}
+
+static struct irq_chip se7722_irq_chip __read_mostly = {
+	.name           = "SE7722-FPGA",
+	.mask           = disable_se7722_irq,
+	.unmask         = enable_se7722_irq,
+	.mask_ack       = disable_se7722_irq,
+};
+
+static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short intv = ctrl_inw(IRQ01_STS);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
+
+	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7722_IRQ(void)
+{
+	int i;
+
+	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
+	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
+					      &se7722_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
new file mode 100644
index 00000000000..fe6f96517e1
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -0,0 +1,194 @@
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/input.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/clock.h>
+#include <mach-se/mach/se7722.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.end    = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = { /* SW1 -> SW30 */
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+		KEY_Z,
+		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&cf_ide_device,
+	&sh_keysc_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+	clk_always_enable("mstp214"); /* KEYSC */
+
+	return platform_add_devices(se7722_devices,
+		ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
+
+	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+	/* LCDC I/O */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	/* SIOF1*/
+	ctrl_outw(0x0003, PORT_PSELB);
+	ctrl_outw(0xe000, PORT_PSELC);
+	ctrl_outw(0x0000, PORT_PKCR);
+
+	/* LCDC */
+	ctrl_outw(0x4020, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(0x0002, PORT_PRCR);
+	ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+
+	/* KEYSC */
+	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+	ctrl_outw(0x0000, PORT_PYCR);
+	ctrl_outw(0x0000, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7722 __initmv = {
+	.mv_name                = "Solution Engine 7722" ,
+	.mv_setup               = se7722_setup ,
+	.mv_nr_irqs		= SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
+	.mv_init_irq		= init_se7722_IRQ,
+};
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3a9de..dbc29f3a9de 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
new file mode 100644
index 00000000000..6287ae57031
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for Hitachi 7751 SolutionEngine.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_se.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/addrspace.h>
+
+static inline volatile u16 *port2adr(unsigned int port)
+{
+	if (port >= 0x2000)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	maybebadio((unsigned long)port);
+	return (volatile __u16*)port;
+}
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used  w/o translation for
+ * compatibility.
+ */
+unsigned char sh7751se_inb(unsigned long port)
+{
+	if (PXSEG(port))
+		return *(volatile unsigned char *)port;
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
+	else
+		return (*port2adr(port)) & 0xff;
+}
+
+unsigned char sh7751se_inb_p(unsigned long port)
+{
+	unsigned char v;
+
+        if (PXSEG(port))
+                v = *(volatile unsigned char *)port;
+	else if (is_pci_ioaddr(port))
+                v = *(volatile unsigned char *)pci_ioaddr(port);
+	else
+		v = (*port2adr(port)) & 0xff;
+	ctrl_delay();
+	return v;
+}
+
+unsigned short sh7751se_inw(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned short *)port;
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned short *)pci_ioaddr(port);
+	else if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+unsigned int sh7751se_inl(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned long *)port;
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned int *)pci_ioaddr(port);
+	else if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+void sh7751se_outb(unsigned char value, unsigned long port)
+{
+
+        if (PXSEG(port))
+                *(volatile unsigned char *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
+	else
+		*(port2adr(port)) = value;
+}
+
+void sh7751se_outb_p(unsigned char value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned char *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
+	else
+		*(port2adr(port)) = value;
+	ctrl_delay();
+}
+
+void sh7751se_outw(unsigned short value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned short *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned short *)pci_ioaddr(port)) = value;
+	else if (port >= 0x2000)
+		*port2adr(port) = value;
+	else
+		maybebadio(port);
+}
+
+void sh7751se_outl(unsigned int value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned long *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned long*)pci_ioaddr(port)) = value;
+	else
+		maybebadio(port);
+}
+
+void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
+
+void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
new file mode 100644
index 00000000000..5c9847ea1e7
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/sh/boards/se/7751/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <mach-se/mach/se7751.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7751se_IRQ(void)
+{
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
index 203b2923fe7..203b2923fe7 100644
--- a/arch/sh/boards/se/7751/pci.c
+++ b/arch/sh/boards/mach-se/7751/pci.c
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
new file mode 100644
index 00000000000..50572512e3e
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/sh/boards/se/7751/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+__initcall(se7751_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7751se __initmv = {
+	.mv_name		= "7751 SolutionEngine",
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= sh7751se_inb,
+	.mv_inw			= sh7751se_inw,
+	.mv_inl			= sh7751se_inl,
+	.mv_outb		= sh7751se_outb,
+	.mv_outw		= sh7751se_outw,
+	.mv_outl		= sh7751se_outl,
+
+	.mv_inb_p		= sh7751se_inb_p,
+	.mv_inw_p		= sh7751se_inw,
+	.mv_inl_p		= sh7751se_inl,
+	.mv_outb_p		= sh7751se_outb_p,
+	.mv_outw_p		= sh7751se_outw,
+	.mv_outl_p		= sh7751se_outl,
+
+	.mv_insl		= sh7751se_insl,
+	.mv_outsl		= sh7751se_outsl,
+
+	.mv_init_irq		= init_7751se_IRQ,
+};
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
index 6b88adae3ec..6b88adae3ec 100644
--- a/arch/sh/boards/se/7780/Makefile
+++ b/arch/sh/boards/mach-se/7780/Makefile
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
new file mode 100644
index 00000000000..66ad292c9fc
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7780.h>
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK1);
+	/* mask SM501 interrupt */
+	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK2);
+
+	/* set FPGA INTSEL register */
+	/* FPGA + 0x06 */
+	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+	/* FPGA + 0x08 */
+	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+	/* FPGA + 0x0A */
+	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
new file mode 100644
index 00000000000..1d3a867e94e
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7780.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+	return platform_add_devices(se7780_devices,
+		ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+	/* "SH-Linux" on LED Display */
+	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+	/*
+	 * PCI REQ/GNT setting
+	 *   REQ0/GNT0 -> USB
+	 *   REQ1/GNT1 -> PC Card
+	 *   REQ2/GNT2 -> Serial ATA
+	 *   REQ3/GNT3 -> PCI slot
+	 */
+	ctrl_outw(0x0213, FPGA_REQSEL);
+
+	/* GPIO setting */
+	ctrl_outw(0x0000, GPIO_PECR);
+	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	ctrl_outw(0x0c00, GPIO_PMSELR);
+
+	/* iVDR Power ON */
+	ctrl_outw(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name                = "Solution Engine 7780" ,
+	.mv_setup               = se7780_setup ,
+	.mv_nr_irqs		= 111 ,
+	.mv_init_irq		= init_se7780_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 00000000000..2de42bae4b4
--- /dev/null
+++ b/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c
index 1d0ef7faa10..1d0ef7faa10 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/mach-se/board-se7619.c
diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
index 400306a796e..400306a796e 100644
--- a/arch/sh/boards/sh03/Makefile
+++ b/arch/sh/boards/mach-sh03/Makefile
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 0a9266bb51c..0a9266bb51c 100644
--- a/arch/sh/boards/sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
new file mode 100644
index 00000000000..5771219be3f
--- /dev/null
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -0,0 +1,75 @@
+/*
+ * linux/arch/sh/boards/sh03/setup.c
+ *
+ * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
+#include <asm/addrspace.h>
+
+static void __init init_sh03_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+extern void *cf_io_base;
+
+static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
+{
+	if (PXSEG(port))
+		return (void __iomem *)port;
+	/* CompactFlash (IDE) */
+	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
+		return (void __iomem *)((unsigned long)cf_io_base + port);
+
+        return (void __iomem *)(port + PCI_IO_BASE);
+}
+
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+	board_time_init = sh03_time_init;
+}
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xa0800000,
+		.end	= 0xa0800000,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+__initcall(sh03_devices_setup);
+
+static struct sh_machine_vector mv_sh03 __initmv = {
+	.mv_name		= "Interface (CTP/PCI-SH03)",
+	.mv_setup		= sh03_setup,
+	.mv_nr_irqs		= 48,
+	.mv_ioport_map		= sh03_ioport_map,
+	.mv_init_irq		= init_sh03_IRQ,
+};
diff --git a/arch/sh/boards/mach-sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
new file mode 100644
index 00000000000..f6c0b55516d
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o irq.o
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
new file mode 100644
index 00000000000..fd850bad2de
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sh7763rdp.h>
+
+#define INTC_BASE		(0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR	(INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1	(INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+	/* GPIO enabled */
+	ctrl_outl(1 << 25, INTC_INT2MSKCR);
+
+	/* enable GPIO interrupts */
+	ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+		  INTC_INT2PRI7);
+
+	/* USBH enabled */
+	ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+
+	/* GETHER enabled */
+	ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+
+	/* DMAC enabled */
+	ctrl_outl(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
new file mode 100644
index 00000000000..23850da05e3
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -0,0 +1,208 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <asm/sh7763rdp.h>
+#include <asm/sh_eth.h>
+#include <asm/sh7760fb.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * 128 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * 128 * 1024),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+	.width = 2,
+	.parts = sh7763rdp_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = (64 * 1024 * 1024),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = sh7763rdp_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+	.dev = {
+		.platform_data = &sh7763rdp_nor_flash_data,
+	},
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 58,   /* irq number */
+		.end    = 58,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh7763rdp_eth_device = {
+	.name       = "sh-eth",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+/* SH7763 LCDC */
+static struct resource sh7763rdp_fb_resources[] = {
+	{
+		.start  = 0xFFE80000,
+		.end    = 0xFFE80442 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct fb_videomode sh7763fb_videomode = {
+	.refresh = 60,
+	.name = "VGA Monitor",
+	.xres = 640,
+	.yres = 480,
+	.pixclock = 10000,
+	.left_margin = 80,
+	.right_margin = 24,
+	.upper_margin = 30,
+	.lower_margin = 1,
+	.hsync_len = 96,
+	.vsync_len = 1,
+	.sync = 0,
+	.vmode = FB_VMODE_NONINTERLACED,
+	.flag = FBINFO_FLAG_DEFAULT,
+};
+
+static struct sh7760fb_platdata sh7763fb_def_pdata = {
+	.def_mode = &sh7763fb_videomode,
+	.ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
+	.lddfr = LDDFR_16BPP_RGB565,
+	.ldpmmr = 0x0000,
+	.ldpspr = 0xFFFF,
+	.ldaclnr = 0x0001,
+	.ldickr = 0x1102,
+	.rotate = 0,
+	.novsync = 0,
+	.blank = NULL,
+};
+
+static struct platform_device sh7763rdp_fb_device = {
+	.name		= "sh7760-lcdc",
+	.resource	= sh7763rdp_fb_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
+	.dev = {
+		.platform_data = &sh7763fb_def_pdata,
+	},
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+	&sh7763rdp_nor_flash_device,
+	&sh7763rdp_eth_device,
+	&sh7763rdp_fb_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+	return platform_add_devices(sh7763rdp_devices,
+				    ARRAY_SIZE(sh7763rdp_devices));
+}
+device_initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+	/* Board version check */
+	if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+		printk(KERN_INFO "RTE Standard Configuration\n");
+	else
+		printk(KERN_INFO "RTA Standard Configuration\n");
+
+	/* USB pin select bits (clear bit 5-2 to 0) */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+	/* Select USB Host controller */
+	ctrl_outw(0x00, USB_USBHSC);
+
+	/* For LCD */
+	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+	/* set PTI5, bits 11-10 of PICR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
+	ctrl_outw(0, PORT_PKCR);
+	ctrl_outw(0, PORT_PLCR);
+	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+	/* For HAC */
+	/* bit3-0  0100:HAC & SSI1 enable */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+	/* bit14      1:SSI_HAC_CLK enable */
+	ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+	/* SH-Ether */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+
+	/* MMC */
+	/*selects SCIF and MMC other functions */
+	ctrl_outw(0x0001, PORT_PSEL0);
+	/* MMC clock operates */
+	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
+	ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+	.mv_name = "sh7763drp",
+	.mv_setup = sh7763rdp_setup,
+	.mv_nr_irqs = 112,
+	.mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
index d2d2f4b6a50..d2d2f4b6a50 100644
--- a/arch/sh/boards/snapgear/Makefile
+++ b/arch/sh/boards/mach-snapgear/Makefile
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f482426455..0f482426455 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
new file mode 100644
index 00000000000..a5e349d3dda
--- /dev/null
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -0,0 +1,95 @@
+/*
+ * linux/arch/sh/boards/snapgear/setup.c
+ *
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <asm/snapgear.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+/*
+ * EraseConfig handling functions
+ */
+
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+	(void)ctrl_inb(0xb8000000);	/* dummy read */
+
+	printk("SnapGear: erase switch interrupt!\n");
+
+	return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+	printk("SnapGear: EraseConfig init\n");
+	/* Setup "EraseConfig" switch on external IRQ 0 */
+	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+				"Erase Config", NULL))
+		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+				IRL0_IRQ);
+	else
+		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+				IRL0_IRQ);
+	return(0);
+}
+
+module_init(eraseconfig_init);
+
+/****************************************************************************/
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+
+static void __init init_snapgear_IRQ(void)
+{
+	printk("Setup SnapGear IRQ/IPR ...\n");
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+	.mv_name		= "SnapGear SecureEdge5410",
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= snapgear_inb,
+	.mv_inw			= snapgear_inw,
+	.mv_inl			= snapgear_inl,
+	.mv_outb		= snapgear_outb,
+	.mv_outw		= snapgear_outw,
+	.mv_outl		= snapgear_outl,
+
+	.mv_inb_p		= snapgear_inb_p,
+	.mv_inw_p		= snapgear_inw,
+	.mv_inl_p		= snapgear_inl,
+	.mv_outb_p		= snapgear_outb_p,
+	.mv_outw_p		= snapgear_outw,
+	.mv_outl_p		= snapgear_outl,
+
+	.mv_init_irq		= init_snapgear_IRQ,
+};
diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
index 2cc6a23d9d3..2cc6a23d9d3 100644
--- a/arch/sh/boards/renesas/systemh/Makefile
+++ b/arch/sh/boards/mach-systemh/Makefile
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index 1b767e1a142..1b767e1a142 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
new file mode 100644
index 00000000000..601c9c8cdbe
--- /dev/null
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -0,0 +1,101 @@
+/*
+ * linux/arch/sh/boards/renesas/systemh/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SystemH Support.
+ *
+ * Modified for 7751 SystemH by
+ * Jonathan Short.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/systemh7751.h>
+#include <asm/smc37c93x.h>
+
+/* address of external interrupt mask register
+ * address must be set prior to use these (maybe in init_XXX_irq())
+ * XXX : is it better to use .config than specifying it in code? */
+static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
+static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
+
+/* forward declaration */
+static unsigned int startup_systemh_irq(unsigned int irq);
+static void shutdown_systemh_irq(unsigned int irq);
+static void enable_systemh_irq(unsigned int irq);
+static void disable_systemh_irq(unsigned int irq);
+static void mask_and_ack_systemh(unsigned int);
+static void end_systemh_irq(unsigned int irq);
+
+/* hw_interrupt_type */
+static struct hw_interrupt_type systemh_irq_type = {
+	.typename = " SystemH Register",
+	.startup = startup_systemh_irq,
+	.shutdown = shutdown_systemh_irq,
+	.enable = enable_systemh_irq,
+	.disable = disable_systemh_irq,
+	.ack = mask_and_ack_systemh,
+	.end = end_systemh_irq
+};
+
+static unsigned int startup_systemh_irq(unsigned int irq)
+{
+	enable_systemh_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_systemh_irq(unsigned int irq)
+{
+	disable_systemh_irq(irq);
+}
+
+static void disable_systemh_irq(unsigned int irq)
+{
+	if (systemh_irq_mask_register) {
+		unsigned long val, mask = 0x01 << 1;
+
+		/* Clear the "irq"th bit in the mask and set it in the request */
+		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+		val &= ~mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+
+		val = ctrl_inl((unsigned long)systemh_irq_request_register);
+		val |= mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_request_register);
+	}
+}
+
+static void enable_systemh_irq(unsigned int irq)
+{
+	if (systemh_irq_mask_register) {
+		unsigned long val, mask = 0x01 << 1;
+
+		/* Set "irq"th bit in the mask register */
+		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+		val |= mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+	}
+}
+
+static void mask_and_ack_systemh(unsigned int irq)
+{
+	disable_systemh_irq(irq);
+}
+
+static void end_systemh_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_systemh_irq(irq);
+}
+
+void make_systemh_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].chip = &systemh_irq_type;
+	disable_systemh_irq(irq);
+}
+
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
index ee78af84277..ee78af84277 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/mach-systemh/setup.c
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile
index 08d75370006..08d75370006 100644
--- a/arch/sh/boards/titan/Makefile
+++ b/arch/sh/boards/mach-titan/Makefile
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4730c1dd697..4730c1dd697 100644
--- a/arch/sh/boards/titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c
index 5de3b2ad71a..5de3b2ad71a 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/mach-titan/setup.c
diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
index 983e4551fec..983e4551fec 100644
--- a/arch/sh/boards/renesas/x3proto/Makefile
+++ b/arch/sh/boards/mach-x3proto/Makefile
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c3933..b5c673c3933 100644
--- a/arch/sh/boards/renesas/x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
new file mode 100644
index 00000000000..a70d23b2178
--- /dev/null
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -0,0 +1,144 @@
+/*
+ * arch/sh/boards/renesas/x3proto/setup.c
+ *
+ * Renesas SH-X3 Prototype Board Support.
+ *
+ * Copyright (C) 2007 - 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+#include <asm/ilsel.h>
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xb8140020,
+		.end	= 0xb8140020,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= 0x18000300,
+		.end		= 0x18000300 + 0x10 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in by ilsel */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.resource	= smc91x_resources,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.dev	= {
+		.platform_data = &smc91x_info,
+	},
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= 0x18040000,
+		.end	= 0x18080000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "r8a66597_hcd",
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource m66592_usb_peripheral_resources[] = {
+	[0] = {
+		.name	= "m66592_udc",
+		.start	= 0x18080000,
+		.end	= 0x180c0000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "m66592_udc",
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66592_usb_peripheral_device = {
+	.name		= "m66592_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
+	.resource	= m66592_usb_peripheral_resources,
+};
+
+static struct platform_device *x3proto_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_device,
+	&r8a66597_usb_host_device,
+	&m66592_usb_peripheral_device,
+};
+
+static int __init x3proto_devices_setup(void)
+{
+	r8a66597_usb_host_resources[1].start =
+		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
+
+	m66592_usb_peripheral_resources[1].start =
+		m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
+
+	smc91x_resources[1].start =
+		smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
+
+	return platform_add_devices(x3proto_devices,
+				    ARRAY_SIZE(x3proto_devices));
+}
+device_initcall(x3proto_devices_setup);
+
+static void __init x3proto_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	/* Set ICR0.LVLMODE */
+	ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
+static struct sh_machine_vector mv_x3proto __initmv = {
+	.mv_name		= "x3proto",
+	.mv_init_irq		= x3proto_init_irq,
+};
diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig
deleted file mode 100644
index b0abddc3e84..00000000000
--- a/arch/sh/boards/magicpanelr2/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
-	int SH_MAGIC_PANEL_R2_VERSION
-	default "3"
-	help
-	  Set the version of the Magic Panel R2
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile
deleted file mode 100644
index 7a6d586b907..00000000000
--- a/arch/sh/boards/magicpanelr2/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y	 := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile
deleted file mode 100644
index 77037567633..00000000000
--- a/arch/sh/boards/renesas/migor/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	 := setup.o
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
deleted file mode 100644
index 01af44245b5..00000000000
--- a/arch/sh/boards/renesas/migor/setup.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Renesas System Solutions Asia Pte. Ltd - Migo-R
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/i2c.h>
-#include <linux/smc91x.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/sh_keysc.h>
-#include <asm/migor.h>
-
-/* Address     IRQ  Size  Bus  Description
- * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
- * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
- * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
- * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
- * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
- */
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT,
-	.irq_flags = IRQF_TRIGGER_HIGH,
-};
-
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "SMC91C111" ,
-		.start  = 0x10000300,
-		.end    = 0x1000030f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 32, /* IRQ0 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-
-static struct sh_keysc_info sh_keysc_info = {
-	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
-	.scan_timing = 3,
-	.delay = 5,
-	.keycodes = {
-		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
-		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
-		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
-		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
-		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
-	},
-};
-
-static struct resource sh_keysc_resources[] = {
-	[0] = {
-		.start  = 0x044b0000,
-		.end    = 0x044b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 79,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_keysc_device = {
-	.name           = "sh_keysc",
-	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
-	.resource       = sh_keysc_resources,
-	.dev	= {
-		.platform_data	= &sh_keysc_info,
-	},
-};
-
-static struct mtd_partition migor_nor_flash_partitions[] =
-{
-	{
-		.name = "uboot",
-		.offset = 0,
-		.size = (1 * 1024 * 1024),
-		.mask_flags = MTD_WRITEABLE,	/* Read-only */
-	},
-	{
-		.name = "rootfs",
-		.offset = MTDPART_OFS_APPEND,
-		.size = (15 * 1024 * 1024),
-	},
-	{
-		.name = "other",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data migor_nor_flash_data = {
-	.width		= 2,
-	.parts		= migor_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
-};
-
-static struct resource migor_nor_flash_resources[] = {
-	[0] = {
-		.name		= "NOR Flash",
-		.start		= 0x00000000,
-		.end		= 0x03ffffff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device migor_nor_flash_device = {
-	.name		= "physmap-flash",
-	.resource	= migor_nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
-	.dev		= {
-		.platform_data = &migor_nor_flash_data,
-	},
-};
-
-static struct mtd_partition migor_nand_flash_partitions[] = {
-	{
-		.name		= "nanddata1",
-		.offset		= 0x0,
-		.size		= 512 * 1024 * 1024,
-	},
-	{
-		.name		= "nanddata2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024 * 1024,
-	},
-};
-
-static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
-				     unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
-	else if (ctrl & NAND_ALE)
-		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
-	else
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-static int migor_nand_flash_ready(struct mtd_info *mtd)
-{
-	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
-}
-
-struct platform_nand_data migor_nand_flash_data = {
-	.chip = {
-		.nr_chips = 1,
-		.partitions = migor_nand_flash_partitions,
-		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
-		.chip_delay = 20,
-		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
-	},
-	.ctrl = {
-		.dev_ready = migor_nand_flash_ready,
-		.cmd_ctrl = migor_nand_flash_cmd_ctl,
-	},
-};
-
-static struct resource migor_nand_flash_resources[] = {
-	[0] = {
-		.name		= "NAND Flash",
-		.start		= 0x18000000,
-		.end		= 0x18ffffff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device migor_nand_flash_device = {
-	.name		= "gen_nand",
-	.resource	= migor_nand_flash_resources,
-	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
-	.dev		= {
-		.platform_data = &migor_nand_flash_data,
-	}
-};
-
-static struct platform_device *migor_devices[] __initdata = {
-	&smc91x_eth_device,
-	&sh_keysc_device,
-	&migor_nor_flash_device,
-	&migor_nand_flash_device,
-};
-
-static struct i2c_board_info __initdata migor_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("migor_ts", 0x51),
-		.irq = 38, /* IRQ6 */
-	},
-};
-
-static int __init migor_devices_setup(void)
-{
-	i2c_register_board_info(0, migor_i2c_devices,
-				ARRAY_SIZE(migor_i2c_devices));
- 
-	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
-}
-__initcall(migor_devices_setup);
-
-static void __init migor_setup(char **cmdline_p)
-{
-	/* SMC91C111 - Enable IRQ0 */
-	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
-
-	/* KEYSC */
-	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
-	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
-	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-	ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
-
-	/* NAND Flash */
-	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
-	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
-		  BSC_CS6ABCR);
-
-	/* I2C */
-	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
-
-	/* Touch Panel - Enable IRQ6 */
-	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
-	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
-	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
-}
-
-static struct sh_machine_vector mv_migor __initmv = {
-	.mv_name		= "Migo-R",
-	.mv_setup		= migor_setup,
-};
diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c
deleted file mode 100644
index c844dfa5d58..00000000000
--- a/arch/sh/boards/renesas/r7780rp/psw.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/sh/boards/renesas/r7780rp/psw.c
- *
- * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
- *
- * Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/mach/r7780rp.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
-	struct platform_device *pdev = arg;
-	struct push_switch *psw = platform_get_drvdata(pdev);
-	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
-	unsigned int l, mask;
-	int ret = 0;
-
-	l = ctrl_inw(PA_DBSW);
-
-	/* Nothing to do if there's no state change */
-	if (psw->state) {
-		ret = 1;
-		goto out;
-	}
-
-	mask = l & 0x70;
-	/* Figure out who raised it */
-	if (mask & (1 << psw_info->bit)) {
-		psw->state = !!(mask & (1 << psw_info->bit));
-		if (psw->state)	/* debounce */
-			mod_timer(&psw->debounce, jiffies + 50);
-
-		ret = 1;
-	}
-
-out:
-	/* Clear the switch IRQs */
-	l |= (0x7 << 12);
-	ctrl_outw(l, PA_DBSW);
-
-	return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_resources[] = {
-	[0] = {
-		.start	= IRQ_PSW,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct push_switch_platform_info s2_platform_data = {
-	.name		= "s2",
-	.bit		= 6,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s2_switch_device = {
-	.name		= "push-switch",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s2_platform_data,
-	},
-};
-
-static struct push_switch_platform_info s3_platform_data = {
-	.name		= "s3",
-	.bit		= 5,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s3_switch_device = {
-	.name		= "push-switch",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s3_platform_data,
-	},
-};
-
-static struct push_switch_platform_info s4_platform_data = {
-	.name		= "s4",
-	.bit		= 4,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s4_switch_device = {
-	.name		= "push-switch",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s4_platform_data,
-	},
-};
-
-static struct platform_device *psw_devices[] = {
-	&s2_switch_device, &s3_switch_device, &s4_switch_device,
-};
-
-static int __init psw_init(void)
-{
-	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c
deleted file mode 100644
index 0ba2fe674c4..00000000000
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by
- * Jonathan Short.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <asm/io.h>
-#include <asm/systemh7751.h>
-#include <asm/smc37c93x.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
-static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
-
-/* forward declaration */
-static unsigned int startup_systemh_irq(unsigned int irq);
-static void shutdown_systemh_irq(unsigned int irq);
-static void enable_systemh_irq(unsigned int irq);
-static void disable_systemh_irq(unsigned int irq);
-static void mask_and_ack_systemh(unsigned int);
-static void end_systemh_irq(unsigned int irq);
-
-/* hw_interrupt_type */
-static struct hw_interrupt_type systemh_irq_type = {
-	.typename = " SystemH Register",
-	.startup = startup_systemh_irq,
-	.shutdown = shutdown_systemh_irq,
-	.enable = enable_systemh_irq,
-	.disable = disable_systemh_irq,
-	.ack = mask_and_ack_systemh,
-	.end = end_systemh_irq
-};
-
-static unsigned int startup_systemh_irq(unsigned int irq)
-{
-	enable_systemh_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_systemh_irq(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
-static void disable_systemh_irq(unsigned int irq)
-{
-	if (systemh_irq_mask_register) {
-		unsigned long val, mask = 0x01 << 1;
-
-		/* Clear the "irq"th bit in the mask and set it in the request */
-		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
-		val &= ~mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
-
-		val = ctrl_inl((unsigned long)systemh_irq_request_register);
-		val |= mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_request_register);
-	}
-}
-
-static void enable_systemh_irq(unsigned int irq)
-{
-	if (systemh_irq_mask_register) {
-		unsigned long val, mask = 0x01 << 1;
-
-		/* Set "irq"th bit in the mask register */
-		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
-		val |= mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
-	}
-}
-
-static void mask_and_ack_systemh(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
-static void end_systemh_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_systemh_irq(irq);
-}
-
-void make_systemh_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &systemh_irq_type;
-	disable_systemh_irq(irq);
-}
-
diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/renesas/x3proto/setup.c
deleted file mode 100644
index abc5b6d418f..00000000000
--- a/arch/sh/boards/renesas/x3proto/setup.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * arch/sh/boards/renesas/x3proto/setup.c
- *
- * Renesas SH-X3 Prototype Board Support.
- *
- * Copyright (C) 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/ilsel.h>
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= 0xb8140020,
-		.end	= 0xb8140020,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= 0x18000300,
-		.end		= 0x18000300 + 0x10 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* Filled in by ilsel */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.resource	= smc91x_resources,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
-	[0] = {
-		.name	= "r8a66597_hcd",
-		.start	= 0x18040000,
-		.end	= 0x18080000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "r8a66597_hcd",
-		/* Filled in by ilsel */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device r8a66597_usb_host_device = {
-	.name		= "r8a66597_hcd",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= NULL,		/* don't use dma */
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
-	.resource	= r8a66597_usb_host_resources,
-};
-
-static struct resource m66592_usb_peripheral_resources[] = {
-	[0] = {
-		.name	= "m66592_udc",
-		.start	= 0x18080000,
-		.end	= 0x180c0000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "m66592_udc",
-		/* Filled in by ilsel */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m66592_usb_peripheral_device = {
-	.name		= "m66592_udc",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= NULL,		/* don't use dma */
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
-	.resource	= m66592_usb_peripheral_resources,
-};
-
-static struct platform_device *x3proto_devices[] __initdata = {
-	&heartbeat_device,
-	&smc91x_device,
-	&r8a66597_usb_host_device,
-	&m66592_usb_peripheral_device,
-};
-
-static int __init x3proto_devices_setup(void)
-{
-	r8a66597_usb_host_resources[1].start =
-		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
-
-	m66592_usb_peripheral_resources[1].start =
-		m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
-
-	smc91x_resources[1].start =
-		smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
-
-	return platform_add_devices(x3proto_devices,
-				    ARRAY_SIZE(x3proto_devices));
-}
-device_initcall(x3proto_devices_setup);
-
-static void __init x3proto_init_irq(void)
-{
-	plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
-	/* Set ICR0.LVLMODE */
-	ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
-static struct sh_machine_vector mv_x3proto __initmv = {
-	.mv_name		= "x3proto",
-	.mv_init_irq		= x3proto_init_irq,
-};
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c
deleted file mode 100644
index 1308e618e04..00000000000
--- a/arch/sh/boards/se/7206/io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7206.h>
-
-
-static inline void delay(void)
-{
-	ctrl_inw(0x20000000);  /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port >= 0x2000 && port < 0x2020)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x300 && port < 0x310)
-		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
-	return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
-	return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	v = (*port2adr(port)) & 0xff;
-	delay();
-	return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
-	return *port2adr(port);;
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-	delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
-	*port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c
deleted file mode 100644
index 9d5bfc77d0d..00000000000
--- a/arch/sh/boards/se/7206/irq.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7206/irq.c
- *
- * Copyright (C) 2005,2006 Yoshinori Sato
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/se7206.h>
-
-#define INTSTS0 0x31800000
-#define INTSTS1 0x31800002
-#define INTMSK0 0x31800004
-#define INTMSK1 0x31800006
-#define INTSEL  0x31800008
-
-#define IRQ0_IRQ 64
-#define IRQ1_IRQ 65
-#define IRQ3_IRQ 67
-
-#define INTC_IPR01 0xfffe0818
-#define INTC_ICR1  0xfffe0802
-
-static void disable_se7206_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
-	unsigned short msk0,msk1;
-
-	/* Set the priority in IPR to 0 */
-	val = ctrl_inw(INTC_IPR01);
-	val &= mask;
-	ctrl_outw(val, INTC_IPR01);
-	/* FPGA mask set */
-	msk0 = ctrl_inw(INTMSK0);
-	msk1 = ctrl_inw(INTMSK1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		msk0 |= 0x0010;
-		break;
-	case IRQ1_IRQ:
-		msk0 |= 0x000f;
-		break;
-	case IRQ3_IRQ:
-		msk0 |= 0x0f00;
-		msk1 |= 0x00ff;
-		break;
-	}
-	ctrl_outw(msk0, INTMSK0);
-	ctrl_outw(msk1, INTMSK1);
-}
-
-static void enable_se7206_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
-	unsigned short msk0,msk1;
-
-	/* Set priority in IPR back to original value */
-	val = ctrl_inw(INTC_IPR01);
-	val |= value;
-	ctrl_outw(val, INTC_IPR01);
-
-	/* FPGA mask reset */
-	msk0 = ctrl_inw(INTMSK0);
-	msk1 = ctrl_inw(INTMSK1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		msk0 &= ~0x0010;
-		break;
-	case IRQ1_IRQ:
-		msk0 &= ~0x000f;
-		break;
-	case IRQ3_IRQ:
-		msk0 &= ~0x0f00;
-		msk1 &= ~0x00ff;
-		break;
-	}
-	ctrl_outw(msk0, INTMSK0);
-	ctrl_outw(msk1, INTMSK1);
-}
-
-static void eoi_se7206_irq(unsigned int irq)
-{
-	unsigned short sts0,sts1;
-
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_se7206_irq(irq);
-	/* FPGA isr clear */
-	sts0 = ctrl_inw(INTSTS0);
-	sts1 = ctrl_inw(INTSTS1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		sts0 &= ~0x0010;
-		break;
-	case IRQ1_IRQ:
-		sts0 &= ~0x000f;
-		break;
-	case IRQ3_IRQ:
-		sts0 &= ~0x0f00;
-		sts1 &= ~0x00ff;
-		break;
-	}
-	ctrl_outw(sts0, INTSTS0);
-	ctrl_outw(sts1, INTSTS1);
-}
-
-static struct irq_chip se7206_irq_chip __read_mostly = {
-	.name		= "SE7206-FPGA",
-	.mask		= disable_se7206_irq,
-	.unmask		= enable_se7206_irq,
-	.mask_ack	= disable_se7206_irq,
-	.eoi		= eoi_se7206_irq,
-};
-
-static void make_se7206_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
-				      handle_level_irq, "level");
-	disable_se7206_irq(irq);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7206_IRQ(void)
-{
-	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
-	make_se7206_irq(IRQ1_IRQ); /* ATA */
-	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-	ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
-
-	/* FPGA System register setup*/
-	ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
-	ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
-	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
-	ctrl_outw(0x0001,INTSEL);
-}
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
deleted file mode 100644
index 4fe84cc0840..00000000000
--- a/arch/sh/boards/se/7206/setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *
- * linux/arch/sh/boards/se/7206/setup.c
- *
- * Copyright (C) 2006  Yoshinori Sato
- * Copyright (C) 2007 - 2008  Paul Mundt
- *
- * Hitachi 7206 SolutionEngine Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <asm/se7206.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name		= "smc91x-regs",
-		.start		= PA_SMSC + 0x300,
-		.end		= PA_SMSC + 0x300 + 0x020 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 64,
-		.end		= 64,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 32,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se7206_devices[] __initdata = {
-	&smc91x_device,
-	&heartbeat_device,
-};
-
-static int __init se7206_devices_setup(void)
-{
-	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
-}
-__initcall(se7206_devices_setup);
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
-	.mv_name		= "SolutionEngine",
-	.mv_nr_irqs		= 256,
-	.mv_inb			= se7206_inb,
-	.mv_inw			= se7206_inw,
-	.mv_outb		= se7206_outb,
-	.mv_outw		= se7206_outw,
-
-	.mv_inb_p		= se7206_inb_p,
-	.mv_inw_p		= se7206_inw,
-	.mv_outb_p		= se7206_outb_p,
-	.mv_outw_p		= se7206_outw,
-
-	.mv_insb		= se7206_insb,
-	.mv_insw		= se7206_insw,
-	.mv_outsb		= se7206_outsb,
-	.mv_outsw		= se7206_outsw,
-
-	.mv_init_irq		= init_se7206_IRQ,
-};
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c
deleted file mode 100644
index 3a6d1142493..00000000000
--- a/arch/sh/boards/se/7343/io.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * arch/sh/boards/se/7343/io.c
- *
- * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
- *
- */
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <asm/mach/se7343.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
-	unsigned long start, end;
-	unsigned long base;
-	struct iop *(*check) (struct iop * p, unsigned long port);
-	unsigned char (*inb) (struct iop * p, unsigned long port);
-	unsigned short (*inw) (struct iop * p, unsigned long port);
-	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
-	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
-	static int count;
-
-	if (count < 100)
-		count++;
-
-	port &= 0xFFFF;
-
-	if ((p->start <= port) && (port <= p->end))
-		return p;
-	else
-		badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
-	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
-		return p;
-	return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
-	return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
-	return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	*(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
-	*(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-	unsigned long v;
-
-	if (port & 1)
-		addr += 0x00400000;
-	v = *(volatile unsigned char *) addr;
-	return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-
-	if (port & 1)
-		addr += 0x00400000;
-	*(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
-	badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
-	.start = 0x00,
-	.end = 0x0F,
-	.base = 0x04000000,
-	.check = simple_check,
-	.inb = simple_inb,
-	.inw = simple_inw,
-	.outb = simple_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_NE2000
-/* NE2000 pc card NIC */
-static struct iop neiop = {
-	.start = 0x280,
-	.end = 0x29f,
-	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
-	.check = simple_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
-	.base = 0xb0600000,
-	.check = ide_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
-	if (0) ;
-#if defined(CONFIG_SMC91X)
-	else if (laniop.check(&laniop, port))
-		return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
-	else if (neiop.check(&neiop, port))
-		return &neiop;
-#endif
-#if defined(CONFIG_IDE)
-	else if (cfiop.check(&cfiop, port))
-		return &cfiop;
-#endif
-	else
-		return NULL;
-}
-
-static inline void
-delay(void)
-{
-	ctrl_inw(0xac000000);
-	ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7343se_inb(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inb) (p, port);
-}
-
-unsigned char
-sh7343se_inb_p(unsigned long port)
-{
-	unsigned char v = sh7343se_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short
-sh7343se_inw(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inw) (p, port);
-}
-
-unsigned int
-sh7343se_inl(unsigned long port)
-{
-	badio(inl, port);
-}
-
-void
-sh7343se_outb(unsigned char value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outb) (p, value, port);
-}
-
-void
-sh7343se_outb_p(unsigned char value, unsigned long port)
-{
-	sh7343se_outb(value, port);
-	delay();
-}
-
-void
-sh7343se_outw(unsigned short value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outw) (p, value, port);
-}
-
-void
-sh7343se_outl(unsigned int value, unsigned long port)
-{
-	badio(outl, port);
-}
-
-void
-sh7343se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inb) (p, port);
-}
-
-void
-sh7343se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned short *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inw) (p, port);
-}
-
-void
-sh7343se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void
-sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *a = (unsigned char *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outb) (p, *a++, port);
-}
-
-void
-sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned short *a = (unsigned short *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outw) (p, *a++, port);
-}
-
-void
-sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(outsw, port);
-}
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
deleted file mode 100644
index 763f6deba81..00000000000
--- a/arch/sh/boards/se/7343/irq.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/sh/boards/se/7343/irq.c
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/mach/se7343.h>
-
-static void
-disable_intreq_irq(unsigned int irq)
-{
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val |= 1 << bit;
-	ctrl_outw(val, PA_CPLD_IMSK);
-}
-
-static void
-enable_intreq_irq(unsigned int irq)
-{
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val &= ~(1 << bit);
-	ctrl_outw(val, PA_CPLD_IMSK);
-}
-
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
-	enable_intreq_irq(irq);
-	return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
-	.typename = "FPGA-IRQ",
-	.startup = startup_intreq_irq,
-	.shutdown = shutdown_intreq_irq,
-	.enable = enable_intreq_irq,
-	.disable = disable_intreq_irq,
-	.ack = mask_and_ack_intreq_irq,
-	.end = end_intreq_irq
-};
-
-static void
-make_intreq_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &intreq_irq_type;
-	disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
-{
-	int bit;
-	volatile u16 val;
-
-	if (irq == IRQ5_IRQ) {
-		/* Read status Register */
-		val = ctrl_inw(PA_CPLD_ST);
-		bit = ffs(val);
-		if (bit != 0)
-			return OFFCHIP_IRQ_BASE + bit - 1;
-	}
-	return irq;
-}
-
-/* IRQ5 is multiplexed between the following sources:
- * 1. PC Card socket
- * 2. Extension slot
- * 3. USB Controller
- * 4. Serial Controller
- *
- * We configure IRQ5 as a cascade IRQ.
- */
-static struct irqaction irq5 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "IRQ5-cascade",
-};
-
-static struct ipr_data se7343_irq5_ipr_map[] = {
-	{ IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
-};
-static struct ipr_data se7343_siof0_vpu_ipr_map[] = {
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se7343_other_ipr_map[] = {
-	{ DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-	{ DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
-	/* I2C block */
-	{ IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-
-	{ IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-
-	/* SIOF */
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
-	/* SIU */
-	{ SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
-	/* VIO interrupt */
-	{ CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
-	/*MFI interrupt*/
-
-	{ MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY },
-
-	/* LCD controller */
-	{ LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_7343se_IRQ(void)
-{
-	/* Setup Multiplexed interrupts */
-	ctrl_outw(8, PA_CPLD_MODESET);	/* Set all CPLD interrupts to active
-					 * low.
-					 */
-	/* Mask all CPLD controller interrupts */
-	ctrl_outw(0x0fff, PA_CPLD_IMSK);
-
-	/* PC Card interrupts */
-	make_intreq_irq(PC_IRQ0);
-	make_intreq_irq(PC_IRQ1);
-	make_intreq_irq(PC_IRQ2);
-	make_intreq_irq(PC_IRQ3);
-
-	/* Extension Slot Interrupts */
-	make_intreq_irq(EXT_IRQ0);
-	make_intreq_irq(EXT_IRQ1);
-	make_intreq_irq(EXT_IRQ2);
-	make_intreq_irq(EXT_IRQ3);
-
-	/* USB Controller interrupts */
-	make_intreq_irq(USB_IRQ0);
-	make_intreq_irq(USB_IRQ1);
-
-	/* Serial Controller interrupts */
-	make_intreq_irq(UART_IRQ0);
-	make_intreq_irq(UART_IRQ1);
-
-	/* Setup all external interrupts to be active low */
-	ctrl_outw(0xaaaa, INTC_ICR1);
-
-	make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map));
-
-	setup_irq(IRQ5_IRQ, &irq5);
-	/* Set port control to use IRQ5 */
-	*(u16 *)0xA4050108 &= ~0xc;
-
-	make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map));
-
-	ctrl_outb(0x0f, INTC_IMCR5);	/* enable SCIF IRQ */
-
-	make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map));
-
-	ctrl_outw(0x2000, PA_MRSHPC + 0x0c);	/* mrshpc irq enable */
-}
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
deleted file mode 100644
index c9431b3a051..00000000000
--- a/arch/sh/boards/se/7343/setup.c
+++ /dev/null
@@ -1,94 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/mach/se7343.h>
-#include <asm/irq.h>
-
-void init_7343se_IRQ(void);
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x1000000F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/*
-		 * shared with other devices via externel
-		 * interrupt controller in FPGA...
-		 */
-		.start	= EXT_IRQ2,
-		.end	= EXT_IRQ2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *sh7343se_platform_devices[] __initdata = {
-	&smc91x_device,
-	&heartbeat_device,
-};
-
-static int __init sh7343se_devices_setup(void)
-{
-	return platform_add_devices(sh7343se_platform_devices,
-				    ARRAY_SIZE(sh7343se_platform_devices));
-}
-
-static void __init sh7343se_setup(char **cmdline_p)
-{
-	device_initcall(sh7343se_devices_setup);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7343se __initmv = {
-	.mv_name = "SolutionEngine 7343",
-	.mv_setup = sh7343se_setup,
-	.mv_nr_irqs = 108,
-	.mv_inb = sh7343se_inb,
-	.mv_inw = sh7343se_inw,
-	.mv_inl = sh7343se_inl,
-	.mv_outb = sh7343se_outb,
-	.mv_outw = sh7343se_outw,
-	.mv_outl = sh7343se_outl,
-
-	.mv_inb_p = sh7343se_inb_p,
-	.mv_inw_p = sh7343se_inw,
-	.mv_inl_p = sh7343se_inl,
-	.mv_outb_p = sh7343se_outb_p,
-	.mv_outw_p = sh7343se_outw,
-	.mv_outl_p = sh7343se_outl,
-
-	.mv_insb = sh7343se_insb,
-	.mv_insw = sh7343se_insw,
-	.mv_insl = sh7343se_insl,
-	.mv_outsb = sh7343se_outsb,
-	.mv_outsw = sh7343se_outsw,
-	.mv_outsl = sh7343se_outsl,
-
-	.mv_init_irq = init_7343se_IRQ,
-	.mv_irq_demux = shmse_irq_demux,
-};
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
deleted file mode 100644
index d21775c28cd..00000000000
--- a/arch/sh/boards/se/7619/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
deleted file mode 100644
index c4550473d4c..00000000000
--- a/arch/sh/boards/se/770x/io.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
- *
- * linux/arch/sh/kernel/io_se.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se.h>
-
-/* SH pcmcia io window base, start and end.  */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port & 0xff000000)
-		return ( volatile __u16 *) port;
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x1000)
-		return (volatile __u16 *) (PA_83902 + (port << 1));
-	else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
-		return (*port2adr(port) >> 8); 
-	else
-		return (*port2adr(port))&0xff; 
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
-		v = (*port2adr(port) >> 8); 
-	else
-		v = (*port2adr(port))&0xff; 
-	ctrl_delay();
-	return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
-	maybebadio(port);
-	return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
-	maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-		while (count--)
-			*ap++ = *bp;
-	} else if (shifted_port(port)) {
-		while (count--)
-			*ap++ = *p >> 8;
-	} else {
-		while (count--)
-			*ap++ = *p;
-	}
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); 
-		while (count--)
-			*bp = *ap++;
-	} else if (shifted_port(port)) {
-		while (count--)
-			*p = *ap++ << 8;
-	} else {
-		while (count--)
-			*p = *ap++;
-	}
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
deleted file mode 100644
index cdb0807928a..00000000000
--- a/arch/sh/boards/se/770x/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2006  Nobuhiro Iwamatsu
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se.h>
-
-static struct ipr_data ipr_irq_table[] = {
-	/*
-	* Super I/O (Just mimic PC):
-	*  1: keyboard
-	*  3: serial 0
-	*  4: serial 1
-	*  5: printer
-	*  6: floppy
-	*  8: rtc
-	* 12: mouse
-	* 14: ide0
-	*/
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-	/* This is default value */
-	{ 13, 0, 8,  0x0f-13, },
-	{ 5 , 0, 4,  0x0f- 5, },
-	{ 10, 1, 0,  0x0f-10, },
-	{ 7 , 2, 4,  0x0f- 7, },
-	{ 3 , 2, 0,  0x0f- 3, },
-	{ 1 , 3, 12, 0x0f- 1, },
-	{ 12, 3, 4,  0x0f-12, }, /* LAN */
-	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
-	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
-	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
-	{ 0 , 5, 12, 0x0f   , }, 
-	{ 4 , 5, 4,  0x0f- 4, },
-	{ 8 , 6, 12, 0x0f- 8, },
-	{ 9 , 6, 8,  0x0f- 9, },
-	{ 11, 6, 4,  0x0f-11, },
-#else
-	{ 14, 0,  8, 0x0f-14, },
-	{ 12, 0,  4, 0x0f-12, },
-	{  8, 1,  4, 0x0f- 8, },
-	{  6, 2, 12, 0x0f- 6, },
-	{  5, 2,  8, 0x0f- 5, },
-	{  4, 2,  4, 0x0f- 4, },
-	{  3, 2,  0, 0x0f- 3, },
-	{  1, 3, 12, 0x0f- 1, },
-#if defined(CONFIG_STNIC)
-	/* ST NIC */
-	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
-#endif
-	/* MRSHPC IRQs setting */
-	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
-	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
-	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
-	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
-	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
-	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
-	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
-#endif
-};
-
-static unsigned long ipr_offsets[] = {
-	BCR_ILCRA,
-	BCR_ILCRB,
-	BCR_ILCRC,
-	BCR_ILCRD,
-	BCR_ILCRE,
-	BCR_ILCRF,
-	BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-	.ipr_offsets	= ipr_offsets,
-	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
-
-	.ipr_data	= ipr_irq_table,
-	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
-	.chip = {
-		.name	= "IPR-se770x",
-	},
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se_IRQ(void)
-{
-	/* Disable all interrupts */
-	ctrl_outw(0, BCR_ILCRA);
-	ctrl_outw(0, BCR_ILCRB);
-	ctrl_outw(0, BCR_ILCRC);
-	ctrl_outw(0, BCR_ILCRD);
-	ctrl_outw(0, BCR_ILCRE);
-	ctrl_outw(0, BCR_ILCRF);
-	ctrl_outw(0, BCR_ILCRG);
-
-	register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
deleted file mode 100644
index 318bc8a3969..00000000000
--- a/arch/sh/boards/se/770x/setup.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se.h>
-#include <asm/io.h>
-#include <asm/smc37c93x.h>
-#include <asm/heartbeat.h>
-
-void init_se_IRQ(void);
-
-/*
- * Configure the Super I/O chip
- */
-static void __init smsc_config(int index, int data)
-{
-	outb_p(index, INDEX_PORT);
-	outb_p(data, DATA_PORT);
-}
-
-/* XXX: Another candidate for a more generic cchip machine vector */
-static void __init smsc_setup(char **cmdline_p)
-{
-	outb_p(CONFIG_ENTER, CONFIG_PORT);
-	outb_p(CONFIG_ENTER, CONFIG_PORT);
-
-	/* FDC */
-	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
-	/* AUXIO (GPIO): to use IDE1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
-	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
-	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
-	/* COM1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IO_BASE_HI_INDEX, 0x03);
-	smsc_config(IO_BASE_LO_INDEX, 0xf8);
-	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
-	/* COM2 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IO_BASE_HI_INDEX, 0x02);
-	smsc_config(IO_BASE_LO_INDEX, 0xf8);
-	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
-	/* RTC */
-	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
-	/* XXX: PARPORT, KBD, and MOUSE will come here... */
-	outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start  = PA_MRSHPC_IO + 0x1f0,
-		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
-		.flags  = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start  = IRQ_CFCARD,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device  = {
-	.name           = "pata_platform",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(cf_ide_resources),
-	.resource       = cf_ide_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se_devices[] __initdata = {
-	&heartbeat_device,
-	&cf_ide_device,
-};
-
-static int __init se_devices_setup(void)
-{
-	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
-}
-device_initcall(se_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se __initmv = {
-	.mv_name		= "SolutionEngine",
-	.mv_setup		= smsc_setup,
-#if defined(CONFIG_CPU_SH4)
-	.mv_nr_irqs		= 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-	.mv_nr_irqs		= 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-	.mv_nr_irqs		= 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-	.mv_nr_irqs		= 86,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-	.mv_nr_irqs             = 104,
-#endif
-
-	.mv_inb			= se_inb,
-	.mv_inw			= se_inw,
-	.mv_inl			= se_inl,
-	.mv_outb		= se_outb,
-	.mv_outw		= se_outw,
-	.mv_outl		= se_outl,
-
-	.mv_inb_p		= se_inb_p,
-	.mv_inw_p		= se_inw,
-	.mv_inl_p		= se_inl,
-	.mv_outb_p		= se_outb_p,
-	.mv_outw_p		= se_outw,
-	.mv_outl_p		= se_outl,
-
-	.mv_insb		= se_insb,
-	.mv_insw		= se_insw,
-	.mv_insl		= se_insl,
-	.mv_outsb		= se_outsb,
-	.mv_outsw		= se_outsw,
-	.mv_outsl		= se_outsl,
-
-	.mv_init_irq		= init_se_IRQ,
-};
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/se/7721/irq.c
deleted file mode 100644
index c4fdd622bf8..00000000000
--- a/arch/sh/boards/se/7721/irq.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7721/irq.c
- *
- * Copyright (C) 2008  Renesas Solutions Corp.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/se7721.h>
-
-enum {
-	UNUSED = 0,
-
-	/* board specific interrupt sources */
-	MRSHPC,
-};
-
-static struct intc_vect vectors[] __initdata = {
-	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
-	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
-	  { 0, MRSHPC } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
-			 NULL, NULL, prio_registers, NULL);
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7721_IRQ(void)
-{
-	/* PPCR */
-	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
-
-	register_intc_controller(&intc_desc);
-	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
-}
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/se/7721/setup.c
deleted file mode 100644
index 1be3e92752f..00000000000
--- a/arch/sh/boards/se/7721/setup.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7721/setup.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7721.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start	= PA_MRSHPC_IO + 0x1f0,
-		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
-		.flags	= IORESOURCE_IO,
-	},
-	[2] = {
-		.start  = MRSHPC_IRQ0,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device = {
-	.name		= "pata_platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-};
-
-static struct platform_device *se7721_devices[] __initdata = {
-	&cf_ide_device,
-	&heartbeat_device
-};
-
-static int __init se7721_devices_setup(void)
-{
-	return platform_add_devices(se7721_devices,
-		ARRAY_SIZE(se7721_devices));
-}
-device_initcall(se7721_devices_setup);
-
-static void __init se7721_setup(char **cmdline_p)
-{
-	/* for USB */
-	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
-	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
-	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
-	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_se7721 __initmv = {
-	.mv_name		= "Solution Engine 7721",
-	.mv_setup		= se7721_setup,
-	.mv_nr_irqs		= 109,
-	.mv_init_irq		= init_se7721_IRQ,
-};
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c
deleted file mode 100644
index 0b03f3f610b..00000000000
--- a/arch/sh/boards/se/7722/irq.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7722/irq.c
- *
- * Copyright (C) 2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7722.h>
-
-static void disable_se7722_irq(unsigned int irq)
-{
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
-	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
-}
-
-static void enable_se7722_irq(unsigned int irq)
-{
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
-	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
-}
-
-static struct irq_chip se7722_irq_chip __read_mostly = {
-	.name           = "SE7722-FPGA",
-	.mask           = disable_se7722_irq,
-	.unmask         = enable_se7722_irq,
-	.mask_ack       = disable_se7722_irq,
-};
-
-static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned short intv = ctrl_inw(IRQ01_STS);
-	struct irq_desc *ext_desc;
-	unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
-
-	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
-
-	while (intv) {
-		if (intv & 1) {
-			ext_desc = irq_desc + ext_irq;
-			handle_level_irq(ext_irq, ext_desc);
-		}
-		intv >>= 1;
-		ext_irq++;
-	}
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7722_IRQ(void)
-{
-	int i;
-
-	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
-	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
-
-	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
-		set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
-					      &se7722_irq_chip,
-					      handle_level_irq, "level");
-
-	set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
-	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
-	set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux);
-	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
deleted file mode 100644
index ede3957fc14..00000000000
--- a/arch/sh/boards/se/7722/setup.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7722/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <asm/machvec.h>
-#include <asm/se7722.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-#include <asm/sh_keysc.h>
-
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name           = "heartbeat",
-	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
-};
-
-/* SMC91x */
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "smc91x-regs" ,
-		.start  = PA_LAN + 0x300,
-		.end    = PA_LAN + 0x300 + 0x10 ,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = SMC_IRQ,
-		.end    = SMC_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = NULL,         /* don't use dma */
-		.coherent_dma_mask      = 0xffffffff,
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-};
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start  = PA_MRSHPC_IO + 0x1f0,
-		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
-		.flags  = IORESOURCE_IO,
-	},
-	[1] = {
-		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
-		.flags  = IORESOURCE_IO,
-	},
-	[2] = {
-		.start  = MRSHPC_IRQ0,
-		.end    = MRSHPC_IRQ0,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device  = {
-	.name           = "pata_platform",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(cf_ide_resources),
-	.resource       = cf_ide_resources,
-};
-
-static struct sh_keysc_info sh_keysc_info = {
-	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
-	.scan_timing = 3,
-	.delay = 5,
-	.keycodes = { /* SW1 -> SW30 */
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
-		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
-		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
-		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
-		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
-		KEY_Z,
-		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
-	},
-};
-
-static struct resource sh_keysc_resources[] = {
-	[0] = {
-		.start  = 0x044b0000,
-		.end    = 0x044b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 79,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_keysc_device = {
-	.name           = "sh_keysc",
-	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
-	.resource       = sh_keysc_resources,
-	.dev	= {
-		.platform_data	= &sh_keysc_info,
-	},
-};
-
-static struct platform_device *se7722_devices[] __initdata = {
-	&heartbeat_device,
-	&smc91x_eth_device,
-	&cf_ide_device,
-	&sh_keysc_device,
-};
-
-static int __init se7722_devices_setup(void)
-{
-	return platform_add_devices(se7722_devices,
-		ARRAY_SIZE(se7722_devices));
-}
-device_initcall(se7722_devices_setup);
-
-static void __init se7722_setup(char **cmdline_p)
-{
-	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
-
-	ctrl_outl(0x00051001, MSTPCR0);
-	ctrl_outl(0x00000000, MSTPCR1);
-	/* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
-	ctrl_outl(0xffffb7c0, MSTPCR2);
-
-	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
-	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
-
-	/* LCDC I/O */
-	ctrl_outw(0x0020, PORT_PSELD);
-
-	/* SIOF1*/
-	ctrl_outw(0x0003, PORT_PSELB);
-	ctrl_outw(0xe000, PORT_PSELC);
-	ctrl_outw(0x0000, PORT_PKCR);
-
-	/* LCDC */
-	ctrl_outw(0x4020, PORT_PHCR);
-	ctrl_outw(0x0000, PORT_PLCR);
-	ctrl_outw(0x0000, PORT_PMCR);
-	ctrl_outw(0x0002, PORT_PRCR);
-	ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
-
-	/* KEYSC */
-	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
-	ctrl_outw(0x0000, PORT_PYCR);
-	ctrl_outw(0x0000, PORT_PZCR);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7722 __initmv = {
-	.mv_name                = "Solution Engine 7722" ,
-	.mv_setup               = se7722_setup ,
-	.mv_nr_irqs		= SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
-	.mv_init_irq		= init_se7722_IRQ,
-};
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c
deleted file mode 100644
index e8d846cec89..00000000000
--- a/arch/sh/boards/se/7751/io.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
-	else
-		return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-                v = *(volatile unsigned char *)pci_ioaddr(port);
-	else
-		v = (*port2adr(port)) & 0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned short *)pci_ioaddr(port);
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned int *)pci_ioaddr(port);
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
deleted file mode 100644
index c3d12590e5d..00000000000
--- a/arch/sh/boards/se/7751/irq.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/se7751.h>
-
-static struct ipr_data ipr_irq_table[] = {
-	{ 13, 3, 3, 2 },
-	/* Add additional entries here as drivers are added and tested. */
-};
-
-static unsigned long ipr_offsets[] = {
-	BCR_ILCRA,
-	BCR_ILCRB,
-	BCR_ILCRC,
-	BCR_ILCRD,
-	BCR_ILCRE,
-	BCR_ILCRF,
-	BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-	.ipr_offsets	= ipr_offsets,
-	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
-
-	.ipr_data	= ipr_irq_table,
-	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
-
-	.chip = {
-		.name	= "IPR-se7751",
-	},
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
-	register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
deleted file mode 100644
index deefbfd9259..00000000000
--- a/arch/sh/boards/se/7751/setup.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7751.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se7751_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init se7751_devices_setup(void)
-{
-	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
-}
-__initcall(se7751_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7751se __initmv = {
-	.mv_name		= "7751 SolutionEngine",
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751se_inb,
-	.mv_inw			= sh7751se_inw,
-	.mv_inl			= sh7751se_inl,
-	.mv_outb		= sh7751se_outb,
-	.mv_outw		= sh7751se_outw,
-	.mv_outl		= sh7751se_outl,
-
-	.mv_inb_p		= sh7751se_inb_p,
-	.mv_inw_p		= sh7751se_inw,
-	.mv_inl_p		= sh7751se_inl,
-	.mv_outb_p		= sh7751se_outb_p,
-	.mv_outw_p		= sh7751se_outw,
-	.mv_outl_p		= sh7751se_outl,
-
-	.mv_insl		= sh7751se_insl,
-	.mv_outsl		= sh7751se_outsl,
-
-	.mv_init_irq		= init_7751se_IRQ,
-};
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
deleted file mode 100644
index 6bd70da6bb4..00000000000
--- a/arch/sh/boards/se/7780/irq.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7780/irq.c
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7780.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7780_IRQ(void)
-{
-	/* enable all interrupt at FPGA */
-	ctrl_outw(0, FPGA_INTMSK1);
-	/* mask SM501 interrupt */
-	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
-	/* enable all interrupt at FPGA */
-	ctrl_outw(0, FPGA_INTMSK2);
-
-	/* set FPGA INTSEL register */
-	/* FPGA + 0x06 */
-	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
-		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
-
-	/* FPGA + 0x08 */
-	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
-		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
-		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
-		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
-
-	/* FPGA + 0x0A */
-	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
-
-	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
-}
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
deleted file mode 100644
index 0f08ab3b2be..00000000000
--- a/arch/sh/boards/se/7780/setup.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7780/setup.c
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7780.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name           = "heartbeat",
-	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "smc91x-regs" ,
-		.start  = PA_LAN + 0x300,
-		.end    = PA_LAN + 0x300 + 0x10 ,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = SMC_IRQ,
-		.end    = SMC_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = NULL,         /* don't use dma */
-		.coherent_dma_mask      = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-};
-
-static struct platform_device *se7780_devices[] __initdata = {
-	&heartbeat_device,
-	&smc91x_eth_device,
-};
-
-static int __init se7780_devices_setup(void)
-{
-	return platform_add_devices(se7780_devices,
-		ARRAY_SIZE(se7780_devices));
-}
-device_initcall(se7780_devices_setup);
-
-#define GPIO_PHCR        0xFFEA000E
-#define GPIO_PMSELR      0xFFEA0080
-#define GPIO_PECR        0xFFEA0008
-
-static void __init se7780_setup(char **cmdline_p)
-{
-	/* "SH-Linux" on LED Display */
-	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
-	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
-	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
-	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
-	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
-	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
-	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
-	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
-
-	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
-
-	/*
-	 * PCI REQ/GNT setting
-	 *   REQ0/GNT0 -> USB
-	 *   REQ1/GNT1 -> PC Card
-	 *   REQ2/GNT2 -> Serial ATA
-	 *   REQ3/GNT3 -> PCI slot
-	 */
-	ctrl_outw(0x0213, FPGA_REQSEL);
-
-	/* GPIO setting */
-	ctrl_outw(0x0000, GPIO_PECR);
-	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
-	ctrl_outw(0x0c00, GPIO_PMSELR);
-
-	/* iVDR Power ON */
-	ctrl_outw(0x0001, FPGA_IVDRPW);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
-	.mv_name                = "Solution Engine 7780" ,
-	.mv_setup               = se7780_setup ,
-	.mv_nr_irqs		= 111 ,
-	.mv_init_irq		= init_se7780_IRQ,
-};
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
deleted file mode 100644
index 934ac4f1c48..00000000000
--- a/arch/sh/boards/sh03/setup.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/arch/sh/boards/sh03/setup.c
- *
- * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/sh03/io.h>
-#include <asm/sh03/sh03.h>
-#include <asm/addrspace.h>
-
-static void __init init_sh03_IRQ(void)
-{
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-extern void *cf_io_base;
-
-static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
-{
-	if (PXSEG(port))
-		return (void __iomem *)port;
-	/* CompactFlash (IDE) */
-	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
-		return (void __iomem *)((unsigned long)cf_io_base + port);
-
-        return (void __iomem *)(port + PCI_IO_BASE);
-}
-
-/* arch/sh/boards/sh03/rtc.c */
-void sh03_time_init(void);
-
-static void __init sh03_setup(char **cmdline_p)
-{
-	board_time_init = sh03_time_init;
-}
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= 0xa0800000,
-		.end	= 0xa0800000,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *sh03_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init sh03_devices_setup(void)
-{
-	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
-}
-__initcall(sh03_devices_setup);
-
-static struct sh_machine_vector mv_sh03 __initmv = {
-	.mv_name		= "Interface (CTP/PCI-SH03)",
-	.mv_setup		= sh03_setup,
-	.mv_nr_irqs		= 48,
-	.mv_ioport_map		= sh03_ioport_map,
-	.mv_init_irq		= init_sh03_IRQ,
-};
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
deleted file mode 100644
index 3190cc72430..00000000000
--- a/arch/sh/boards/shmin/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
deleted file mode 100644
index 7022483f98e..00000000000
--- a/arch/sh/boards/snapgear/setup.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * linux/arch/sh/boards/snapgear/setup.c
- *
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- *           Copyright (C) 2000  Kazumoto Kojima
- *
- *           Modified for 7751 Solution Engine by
- *           Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <asm/snapgear.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/cpu/timer.h>
-
-/*
- * EraseConfig handling functions
- */
-
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
-	(void)ctrl_inb(0xb8000000);	/* dummy read */
-
-	printk("SnapGear: erase switch interrupt!\n");
-
-	return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
-	printk("SnapGear: EraseConfig init\n");
-	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
-				"Erase Config", NULL))
-		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-				IRL0_IRQ);
-	else
-		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-				IRL0_IRQ);
-	return(0);
-}
-
-module_init(eraseconfig_init);
-
-/****************************************************************************/
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-
-static void __init init_snapgear_IRQ(void)
-{
-	printk("Setup SnapGear IRQ/IPR ...\n");
-	/* enable individual interrupt mode for externals */
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
-	.mv_name		= "SnapGear SecureEdge5410",
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= snapgear_inb,
-	.mv_inw			= snapgear_inw,
-	.mv_inl			= snapgear_inl,
-	.mv_outb		= snapgear_outb,
-	.mv_outw		= snapgear_outw,
-	.mv_outl		= snapgear_outl,
-
-	.mv_inb_p		= snapgear_inb_p,
-	.mv_inw_p		= snapgear_inw,
-	.mv_inl_p		= snapgear_inl,
-	.mv_outb_p		= snapgear_outb_p,
-	.mv_outw_p		= snapgear_outw,
-	.mv_outl_p		= snapgear_outl,
-
-	.mv_init_irq		= init_snapgear_IRQ,
-};
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 89b408620dc..5b54965eef9 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET	?= 0x80000000
 CONFIG_MEMORY_START	?= 0x0c000000
 CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
+CONFIG_ENTRY_OFFSET	?= 0x00001000
 
 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
 
 targets := zImage vmlinux.srec uImage uImage.srec
 subdir- := compressed
@@ -40,7 +41,7 @@ KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(CONFIG_MEMORY_START) + \
-			$(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
+			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
index c0d25fb1aa6..47685f618ae 100644
--- a/arch/sh/boot/compressed/Makefile_32
+++ b/arch/sh/boot/compressed/Makefile_32
@@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64
index 912f3e205a0..658d4f91555 100644
--- a/arch/sh/boot/compressed/Makefile_64
+++ b/arch/sh/boot/compressed/Makefile_64
@@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index f72c1989f5f..622eac3cf55 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -14,8 +14,8 @@
  *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
  */
 #include <asm/cache.h>
-#include <asm/cpu/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
 
 /*
  * Fixed TLB entries to identity map the beginning of RAM
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index adcea31e663..f386997e4d9 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -74,8 +74,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -84,11 +82,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -101,38 +95,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
 {
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
index a006ef89b9d..2941657e18a 100644
--- a/arch/sh/boot/compressed/misc_64.c
+++ b/arch/sh/boot/compressed/misc_64.c
@@ -72,8 +72,6 @@ static unsigned outcnt = 0;	/* bytes in output buffer */
 static int fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -82,11 +80,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -99,40 +93,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (free_mem_ptr == 0)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
-static void free(void *where)
-{				/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void puts(const char *s)
 {
 }
diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S
new file mode 100644
index 00000000000..566071926b1
--- /dev/null
+++ b/arch/sh/boot/compressed/piggy.S
@@ -0,0 +1,8 @@
+	.global	input_len, input_data
+	.data
+input_len:
+	.long	input_data_end - input_data
+input_data:
+	.incbin	"arch/sh/boot/compressed/vmlinux.bin.gz"
+input_data_end:
+	.end
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index 1ed9d791f86..00000000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,9 +0,0 @@
-SECTIONS
-{
-  .data : { 
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .; 
-	*(.data) 
-	input_data_end = .; 
-	}
-}
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
new file mode 100644
index 00000000000..851c870adf3
--- /dev/null
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -0,0 +1,966 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:21:17 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+CONFIG_CPU_SUBTYPE_SH7723=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_AP325RXA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 57728788b75..3dc1cbd8a98 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,14 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 15:46:27 2007
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 16:49:13 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -55,21 +61,39 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -80,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -93,13 +118,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -108,6 +137,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -116,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -133,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -142,12 +176,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -155,6 +192,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -194,6 +233,7 @@ CONFIG_SH_PCLK_FREQ=49876504
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -204,7 +244,10 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -239,12 +282,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -263,10 +310,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -275,10 +319,6 @@ CONFIG_PCI_AUTO=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,6 +331,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,6 +350,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -316,8 +358,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -334,10 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -345,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -366,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -374,6 +412,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+CONFIG_GDROM=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -384,11 +423,15 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -400,44 +443,49 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -449,6 +497,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -464,12 +513,12 @@ CONFIG_8139TOO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -491,7 +540,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -505,6 +553,8 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -530,10 +580,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -553,6 +606,19 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -568,45 +634,40 @@ CONFIG_SH_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# Sonics Silicon Backplane
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
@@ -615,11 +676,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -653,7 +715,15 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -680,49 +750,30 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -735,14 +786,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -771,7 +819,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -786,14 +833,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -807,35 +854,25 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -845,14 +882,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 756d38dc2f7..41e25b3a5b0 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 19:42:44 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:24:57 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,12 +37,15 @@ CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_USER_NS is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -73,6 +93,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +155,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0d000000
 CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -219,11 +254,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 
 #
@@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
@@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_QDI is not set
@@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -417,9 +464,11 @@ CONFIG_SERIO=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_HP680=y
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,7 +691,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -658,8 +705,11 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -668,10 +718,6 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -714,22 +760,21 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 38f934ab50c..99cc39c5c6c 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,44 +1,53 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec  7 17:13:04 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:35:07 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
 
 #
 # Additional SuperH Device Drivers
 #
+CONFIG_HEARTBEAT=y
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -301,29 +302,16 @@ CONFIG_YENTA_ENE_TUNE=y
 CONFIG_YENTA_TOSHIBA=y
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -331,13 +319,14 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -364,49 +353,36 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -421,10 +397,6 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -432,9 +404,20 @@ CONFIG_ATALK=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -443,35 +426,17 @@ CONFIG_ATALK=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 CONFIG_BLK_DEV_OFFBOARD=y
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-CONFIG_IDEDMA_ONLYDISK=y
 CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -748,18 +653,20 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -767,58 +674,53 @@ CONFIG_8139CP=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -826,6 +728,7 @@ CONFIG_8139CP=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
 
 #
-# Video Capture Adapters
+# Multimedia core support
 #
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-
-#
-# V4L USB devices
-#
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
 CONFIG_VIDEO_USBVIDEO=m
 CONFIG_USB_VICAM=m
 CONFIG_USB_IBMCAM=m
@@ -975,106 +881,100 @@ CONFIG_USB_STV680=m
 # CONFIG_USB_ZC0301 is not set
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
 CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Open Sound System
+# USB Input Devices
 #
-CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
@@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index b68b6cdbb78..aecdfd33c69 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 24 22:04:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:39:41 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-CONFIG_SH_LBOX_RE2=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_LBOX_RE2=y
 
 #
 # Timer and clock configuration
@@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=40000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -262,11 +258,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_DEBUG=y
 CONFIG_PCMCIA=y
@@ -306,29 +302,16 @@ CONFIG_YENTA_O2=y
 # CONFIG_YENTA_TOSHIBA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -336,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +326,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -370,29 +353,26 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
@@ -401,20 +381,8 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -427,10 +395,6 @@ CONFIG_NETFILTER=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -438,9 +402,20 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -449,36 +424,17 @@ CONFIG_NETFILTER=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -612,7 +547,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -622,6 +556,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -635,18 +570,18 @@ CONFIG_ATA=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
@@ -656,88 +591,52 @@ CONFIG_ATA=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y
 CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
 
 #
-# DMA Devices
+# SPI RTC drivers
 #
 
 #
-# Auxiliary Display support
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Virtualization
+# on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1136,7 +979,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1151,14 +993,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index f8398a5f10e..a3a80f3d27c 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Fri Aug 17 12:15:16 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:41:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -81,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -134,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SH_DSP=y
 CONFIG_SH_ADC=y
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_DSP=y
 
@@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -228,11 +265,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0000000
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -477,10 +522,10 @@ CONFIG_SMC911X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -724,7 +764,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_SH_KGDB=y
 
 #
@@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e89d951c3c1..e4b900e72dc 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,28 +1,35 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:27:01 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:47:16 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -31,10 +38,16 @@ CONFIG_SWAP=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-CONFIG_SH_SH4202_MICRODEV=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 CONFIG_CPU_SUBTYPE_SH4_202=y
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_SH4202_MICRODEV=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -251,30 +280,16 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 # Bus options
 #
 CONFIG_SUPERHYWAY=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -282,12 +297,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -308,30 +324,19 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=1
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -536,6 +485,7 @@ CONFIG_SMC91X=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -747,7 +645,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -762,21 +659,20 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 287408b2ace..4f8b1974f2c 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,15 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Thu May 22 14:30:07 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:18:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -20,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -77,10 +78,16 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -90,12 +97,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,7 +181,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -216,6 +226,8 @@ CONFIG_CPU_HAS_DSP=y
 #
 # CONFIG_SH_7722_SOLUTION_ENGINE is not set
 CONFIG_SH_MIGOR=y
+CONFIG_SH_MIGOR_QVGA=y
+# CONFIG_SH_MIGOR_RTA_WVGA is not set
 
 #
 # Timer and clock configuration
@@ -259,6 +271,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -283,10 +296,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -362,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -378,6 +388,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -475,6 +487,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -521,10 +534,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +550,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -602,6 +616,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -632,25 +647,40 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -663,6 +693,7 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -674,8 +705,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -726,6 +755,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -738,7 +769,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
@@ -757,6 +788,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -790,6 +822,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -810,7 +843,11 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-# CONFIG_UIO is not set
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -870,6 +907,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -899,6 +937,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -955,6 +994,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -994,6 +1037,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 1a072615ffd..57a30079758 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar  6 15:39:59 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:51:13 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -84,13 +85,20 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -101,6 +109,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -188,6 +200,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -268,7 +281,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_RCU_TRACE=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -384,6 +396,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -511,7 +532,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -776,6 +795,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -809,24 +840,9 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -967,20 +983,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0dc1ce7b934..1d09d24d429 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:03:57 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 00:59:19 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -88,6 +106,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y
 # Board support
 #
 CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_SH7785LCR is not set
 # CONFIG_SH_R7780RP is not set
 # CONFIG_SH_R7780MP is not set
 CONFIG_SH_R7785RP=y
@@ -245,12 +276,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -295,6 +327,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -355,6 +387,7 @@ CONFIG_LLC=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -364,6 +397,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -488,7 +533,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -722,6 +771,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_SPINLOCK=y
@@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index a0ebd439cbd..840fe3843ff 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 13:02:42 2008
+# Linux kernel version: 2.6.26
+# Mon Jul 28 22:23:03 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -33,21 +33,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Board support
 #
+CONFIG_SH_RSK7203=y
 
 #
 # Timer and clock configuration
@@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -734,6 +832,7 @@ CONFIG_SYSFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 3a915fd436d..8413236c1b3 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:25:55 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:55:52 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 0a6d3b9e648..7d9fa6e9ded 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:17:47 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:59:18 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index bb9bcd6591a..6d834f24290 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 22 11:34:03 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:00:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -90,6 +106,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -174,6 +197,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y
 # CONFIG_SH_7780_SOLUTION_ENGINE is not set
 CONFIG_SH_SDK7780=y
 # CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_SDK7780_STANDALONE is not set
 CONFIG_SH_SDK7780_BASE=y
 
 #
@@ -250,12 +273,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -321,6 +345,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
 
 #
 # Classification
@@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_SCH_FIFO=y
 
 #
@@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_PLATFORM=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -625,7 +654,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -654,6 +682,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -670,6 +699,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
 CONFIG_BLK_DEV_DM=y
@@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +741,7 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -726,6 +760,7 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -743,7 +778,6 @@ CONFIG_SMC91X=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y
 #
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
@@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_SUPERH_MONO=y
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y
 # LED Triggers
 #
 # CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
@@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 6b34baa26ea..af15cbef12b 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 20:27:08 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:06:07 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -87,9 +88,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -516,6 +526,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -738,13 +749,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 84c0075e2ad..4e30b70377e 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,40 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:46:17 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:08:38 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -46,33 +62,47 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,62 +116,28 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -150,67 +146,89 @@ CONFIG_CPU_SH4AL_DSP=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7343_SOLUTION_ENGINE=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=27000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -225,57 +243,50 @@ CONFIG_SH_PCLK_FREQ=27000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_CF_ENABLER is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -283,22 +294,20 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -310,29 +319,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -345,10 +343,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -356,9 +350,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -367,36 +372,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -422,13 +425,15 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -445,130 +450,102 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_ATA is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Multi-device support (RAID and LVM)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_MD is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
+# SCSI Transports
 #
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -576,13 +553,13 @@ CONFIG_SMC91X=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -592,6 +569,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -605,9 +583,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -626,156 +606,106 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
+# CONFIG_I2C is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_EPSON1355 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 
 #
-# Console display driver support
+# Frame buffer hardware drivers
 #
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-CONFIG_SOUND=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Advanced Linux Sound Architecture
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -791,96 +721,49 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# Open Sound System
-#
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -909,7 +792,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -922,35 +804,34 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
@@ -963,56 +844,136 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 3a3c3c1f507..80c1c72edb5 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:43:06 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:12:32 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
@@ -60,20 +62,26 @@ CONFIG_EVENTFD=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
+# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITETHROUGH=y
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
 
 #
 # Board support
@@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
 
 #
 # Companion Chips
@@ -205,11 +225,13 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
+# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
@@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -416,6 +411,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -561,12 +518,9 @@ CONFIG_HID=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -607,8 +560,11 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -617,28 +573,23 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 
@@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # Security options
 #
 # CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 2dd83af988f..7be79cd04eb 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,53 +1,57 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 10:19:02 2007
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 18 16:36:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 CONFIG_CPU_SUBTYPE_SH7712=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_AP325RXA is not set
 
 #
 # Timer and clock configuration
@@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -267,48 +248,40 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -316,7 +289,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
+# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_INGRESS=y
 
 #
 # Classification
@@ -429,50 +380,55 @@ CONFIG_NET_CLS_FW=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -919,7 +787,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -935,68 +802,67 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
new file mode 100644
index 00000000000..baf830c4a7e
--- /dev/null
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -0,0 +1,1133 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc2
+# Fri Aug  8 13:44:20 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_SH7763RDP=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
new file mode 100644
index 00000000000..ff72697365d
--- /dev/null
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -0,0 +1,1388 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Tue Jul 15 21:37:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_SH_MOBILE is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0caf11bb7e2..af7bb589c2c 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <asm/cacheflush.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 
 struct g2_channel {
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 838fad566ea..391cbe1c295 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -13,8 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 71ff3d6f26e..b2ffe649c7c 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <asm/dreamcast/dma.h>
+#include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include "dma-sh.h"
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
index 0f591fbc922..b05af34fc15 100644
--- a/arch/sh/drivers/dma/dma-sh.h
+++ b/arch/sh/drivers/dma/dma-sh.h
@@ -11,7 +11,7 @@
 #ifndef __DMA_SH_H
 #define __DMA_SH_H
 
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
 
 /* Definitions for the SuperH DMAC */
 #define REQ_L	0x00000000
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 51b57c0d1a3..347ee11351e 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -23,7 +23,8 @@ static struct sysdev_class dma_sysclass = {
 };
 EXPORT_SYMBOL(dma_sysclass);
 
-static ssize_t dma_show_devices(struct sys_device *dev, char *buf)
+static ssize_t dma_show_devices(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t len = 0;
 	int i;
@@ -57,13 +58,15 @@ static int __init dma_sysclass_init(void)
 }
 postcore_initcall(dma_sysclass_init);
 
-static ssize_t dma_show_dev_id(struct sys_device *dev, char *buf)
+static ssize_t dma_show_dev_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "%s\n", channel->dev_id);
 }
 
 static ssize_t dma_store_dev_id(struct sys_device *dev,
+				struct sysdev_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -74,6 +77,7 @@ static ssize_t dma_store_dev_id(struct sys_device *dev,
 static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
 
 static ssize_t dma_store_config(struct sys_device *dev,
+				struct sysdev_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -87,13 +91,15 @@ static ssize_t dma_store_config(struct sys_device *dev,
 
 static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config);
 
-static ssize_t dma_show_mode(struct sys_device *dev, char *buf)
+static ssize_t dma_show_mode(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "0x%08x\n", channel->mode);
 }
 
 static ssize_t dma_store_mode(struct sys_device *dev,
+			      struct sysdev_attribute *attr,
 			      const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -104,7 +110,8 @@ static ssize_t dma_store_mode(struct sys_device *dev,
 static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
 
 #define dma_ro_attr(field, fmt)						\
-static ssize_t dma_show_##field(struct sys_device *dev, char *buf)	\
+static ssize_t dma_show_##field(struct sys_device *dev, 		\
+				struct sysdev_attribute *attr, char *buf)\
 {									\
 	struct dma_channel *channel = to_dma_channel(dev);		\
 	return sprintf(buf, fmt, channel->field);			\
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 0718805774e..847e90894d1 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)		+= ops-lboxre2.o fixups-lboxre2.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= ops-se7780.o fixups-se7780.o
 obj-$(CONFIG_SH_CAYMAN)			+= ops-cayman.o
+obj-$(CONFIG_SH_SH7785LCR)		+= ops-sh7785lcr.o fixups-sh7785lcr.o
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index c44699301ee..2bf85cf091e 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static void __init gapspci_fixup_resources(struct pci_dev *dev)
 {
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
new file mode 100644
index 00000000000..4949e601387
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/drivers/pci/fixups-sh7785lcr.c
+ *
+ * R0P7785LC0011RL PCI fixups
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on arch/sh/drivers/pci/fixups-r7780rp.c
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pci_fixup_pcic(void)
+{
+	pci_write_reg(0x000043ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+	pci_write_reg(0xfbb00047, SH7780_PCICMD);
+	pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+	pci_write_reg(0x00011912, SH7780_PCISVID);
+	pci_write_reg(0x08000000, SH7780_PCICSCR0);
+	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+	/* Set IOBR for windows containing area specified in pci.h */
+	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+		      SH7780_PCIIOBR);
+	pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
+
+	return 0;
+}
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c
index 980275ffa30..5ccf9ea3a9d 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/ops-cayman.c
@@ -2,7 +2,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/types.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include "pci-sh5.h"
 
 static inline u8 bridge_swizzle(u8 pin, u8 slot)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index e1284fc6936..f5d2a2aa6f3 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -22,10 +22,11 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static struct resource gapspci_io_resource = {
 	.name	= "GAPSPCI IO",
@@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = {
 	  &gapspci_mem_resource, 0, 1 },
 	{ 0, }
 };
+EXPORT_SYMBOL(board_pci_channels);
 
 /*
  * The !gapspci_config_access case really shouldn't happen, ever, unless
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
index bbdb48c124a..3145c62484d 100644
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
new file mode 100644
index 00000000000..b3bd6870205
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh7785lcr.c
@@ -0,0 +1,66 @@
+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas R0P7785LC0011RL board
+ * Based on arch/sh/drivers/pci/ops-r7780rp.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static char irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return irq_tab[slot];
+}
+
+static struct resource sh7785_io_resource = {
+	.name	= "SH7785_IO",
+	.start	= SH7780_PCI_IO_BASE,
+	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+	.name	= "SH7785_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7785_pci_map = {
+	.window0	= {
+		.base	= SH7780_CS2_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.window1	= {
+		.base	= SH7780_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7780_pcic_init(&sh7785_pci_map);
+}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index ea404704ace..cf48b12ee58 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
 }
 
 #define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_channel *hose,		\
+static int early_##rw##_config_##size(struct pci_channel *hose,		\
 	int top_bus, int bus, int devfn, int offset, type value)	\
 {									\
 	return pci_##rw##_config_##size(				\
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index a00a4df8c02..7a97438762c 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/irq.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 #include "pci-sh5.h"
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index f57095a2617..d3839e609aa 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -135,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check and set
  *  the latency timer as it may not be properly set.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore
new file mode 100644
index 00000000000..378db779fb6
--- /dev/null
+++ b/arch/sh/include/asm/.gitignore
@@ -0,0 +1 @@
+machtypes.h
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
new file mode 100644
index 00000000000..43910cdf78a
--- /dev/null
+++ b/arch/sh/include/asm/Kbuild
@@ -0,0 +1,8 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += cpu-features.h
+
+unifdef-y += unistd_32.h
+unifdef-y += unistd_64.h
+unifdef-y += posix_types_32.h
+unifdef-y += posix_types_64.h
diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h
new file mode 100644
index 00000000000..48824c1fab8
--- /dev/null
+++ b/arch/sh/include/asm/adc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ADC_H
+#define __ASM_ADC_H
+#ifdef __KERNEL__
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+#include <cpu/adc.h>
+
+int adc_single(unsigned int channel);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ADC_H */
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
new file mode 100644
index 00000000000..2702d81bfc0
--- /dev/null
+++ b/arch/sh/include/asm/addrspace.h
@@ -0,0 +1,53 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH CPUs.
+ */
+#ifndef __ASM_SH_ADDRSPACE_H
+#define __ASM_SH_ADDRSPACE_H
+
+#ifdef __KERNEL__
+
+#include <cpu/addrspace.h>
+
+/* If this CPU supports segmentation, hook up the helpers */
+#ifdef P1SEG
+
+/*
+   [ P0/U0 (virtual) ]		0x00000000     <------ User space
+   [ P1 (fixed)   cached ]	0x80000000     <------ Kernel space
+   [ P2 (fixed)  non-cachable]	0xA0000000     <------ Physical access
+   [ P3 (virtual) cached]	0xC0000000     <------ vmalloced area
+   [ P4 control   ]		0xE0000000
+ */
+
+/* Returns the privileged segment base of a given address  */
+#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
+
+/* Returns the physical address of a PnSEG (n=1,2) address   */
+#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
+
+#ifdef CONFIG_29BIT
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
+#define P2SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
+#define P3SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
+#define P4SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
+#endif /* 29BIT */
+#endif /* P1SEG */
+
+/* Check if an address can be reached in 29 bits */
+#define IS_29BIT(a)	(((unsigned long)(a)) < 0x20000000)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
new file mode 100644
index 00000000000..4c5b7dbfced
--- /dev/null
+++ b/arch/sh/include/asm/atomic-grb.h
@@ -0,0 +1,169 @@
+#ifndef __ASM_SH_ATOMIC_GRB_H
+#define __ASM_SH_ATOMIC_GRB_H
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   add     %2,   %0      \n\t" /* add */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (i)
+		: "memory" , "r0", "r1");
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov     r15,  r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   sub     %2,   %0      \n\t" /* sub */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (i)
+		: "memory" , "r0", "r1");
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   add     %2,   %0      \n\t" /* add */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (i)
+		: "memory" , "r0", "r1");
+
+	return tmp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   sub     %2,   %0      \n\t" /* sub */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (i)
+		: "memory", "r0", "r1");
+
+	return tmp;
+}
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+	int tmp;
+	unsigned int _mask = ~mask;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   and     %2,   %0      \n\t" /* add */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (_mask)
+		: "memory" , "r0", "r1");
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   or      %2,   %0      \n\t" /* or */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (mask)
+		: "memory" , "r0", "r1");
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+
+	__asm__ __volatile__ (
+		"   .align 2		\n\t"
+		"   mova     1f,  r0	\n\t"
+		"   nop			\n\t"
+		"   mov     r15,  r1	\n\t"
+		"   mov    #-8,  r15	\n\t"
+		"   mov.l   @%1,  %0	\n\t"
+		"   cmp/eq   %2,  %0	\n\t"
+		"   bf	     1f		\n\t"
+		"   mov.l    %3, @%1	\n\t"
+		"1: mov      r1,  r15	\n\t"
+		: "=&r" (ret)
+		: "r" (v), "r" (old), "r" (new)
+		: "memory" , "r0", "r1" , "t");
+
+	return ret;
+}
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int ret;
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2		\n\t"
+		"   mova    1f,   r0	\n\t"
+		"   nop			\n\t"
+		"   mov    r15,   r1	\n\t"
+		"   mov    #-12,  r15	\n\t"
+		"   mov.l  @%2,   %1	\n\t"
+		"   mov	    %1,   %0    \n\t"
+		"   cmp/eq  %4,   %0	\n\t"
+		"   bt/s    1f		\n\t"
+		"    add    %3,   %1	\n\t"
+		"   mov.l   %1,  @%2	\n\t"
+		"1: mov     r1,   r15	\n\t"
+		: "=&r" (ret), "=&r" (tmp)
+		: "r" (v), "r" (a), "r" (u)
+		: "memory" , "r0", "r1" , "t");
+
+	return ret != u;
+}
+#endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
new file mode 100644
index 00000000000..74f7943cff6
--- /dev/null
+++ b/arch/sh/include/asm/atomic-irq.h
@@ -0,0 +1,71 @@
+#ifndef __ASM_SH_ATOMIC_IRQ_H
+#define __ASM_SH_ATOMIC_IRQ_H
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v += i;
+	local_irq_restore(flags);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v -= i;
+	local_irq_restore(flags);
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp += i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp -= i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v &= ~mask;
+	local_irq_restore(flags);
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v |= mask;
+	local_irq_restore(flags);
+}
+
+#endif /* __ASM_SH_ATOMIC_IRQ_H */
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
new file mode 100644
index 00000000000..4b00b78e3f4
--- /dev/null
+++ b/arch/sh/include/asm/atomic-llsc.h
@@ -0,0 +1,107 @@
+#ifndef __ASM_SH_ATOMIC_LLSC_H
+#define __ASM_SH_ATOMIC_LLSC_H
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_add	\n"
+"	add	%1, %0				\n"
+"	movco.l	%0, @%2				\n"
+"	bf	1b				\n"
+	: "=&z" (tmp)
+	: "r" (i), "r" (&v->counter)
+	: "t");
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_sub	\n"
+"	sub	%1, %0				\n"
+"	movco.l	%0, @%2				\n"
+"	bf	1b				\n"
+	: "=&z" (tmp)
+	: "r" (i), "r" (&v->counter)
+	: "t");
+}
+
+/*
+ * SH-4A note:
+ *
+ * We basically get atomic_xxx_return() for free compared with
+ * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
+ * encoding, so the retval is automatically set without having to
+ * do any special work.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_add_return	\n"
+"	add	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
+"	bf	1b					\n"
+"	synco						\n"
+	: "=&z" (temp)
+	: "r" (i), "r" (&v->counter)
+	: "t");
+
+	return temp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_sub_return	\n"
+"	sub	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
+"	bf	1b					\n"
+"	synco						\n"
+	: "=&z" (temp)
+	: "r" (i), "r" (&v->counter)
+	: "t");
+
+	return temp;
+}
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_clear_mask	\n"
+"	and	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
+"	bf	1b					\n"
+	: "=&z" (tmp)
+	: "r" (~mask), "r" (&v->counter)
+	: "t");
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_set_mask	\n"
+"	or	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
+"	bf	1b					\n"
+	: "=&z" (tmp)
+	: "r" (mask), "r" (&v->counter)
+	: "t");
+}
+
+#endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
new file mode 100644
index 00000000000..c043ef00302
--- /dev/null
+++ b/arch/sh/include/asm/atomic.h
@@ -0,0 +1,89 @@
+#ifndef __ASM_SH_ATOMIC_H
+#define __ASM_SH_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ */
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v,i)		((v)->counter = (i))
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#if defined(CONFIG_GUSA_RB)
+#include <asm/atomic-grb.h>
+#elif defined(CONFIG_CPU_SH4A)
+#include <asm/atomic-llsc.h>
+#else
+#include <asm/atomic-irq.h>
+#endif
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+#define atomic_inc(v) atomic_add(1,(v))
+#define atomic_dec(v) atomic_sub(1,(v))
+
+#ifndef CONFIG_GUSA_RB
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = v->counter;
+	if (likely(ret == old))
+		v->counter = new;
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = v->counter;
+	if (ret != u)
+		v->counter += a;
+	local_irq_restore(flags);
+
+	return ret != u;
+}
+#endif
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing on SH */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h
new file mode 100644
index 00000000000..483effd65e0
--- /dev/null
+++ b/arch/sh/include/asm/auxvec.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_SH_AUXVEC_H
+#define __ASM_SH_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them.
+ */
+
+/*
+ * This entry gives some information about the FPU initialization
+ * performed by the kernel.
+ */
+#define AT_FPUCW		18	/* Used FPU control word.  */
+
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
+/*
+ * Only define this in the vsyscall case, the entry point to
+ * the vsyscall page gets placed here. The kernel will attempt
+ * to build a gate VMA we don't care about otherwise..
+ */
+#define AT_SYSINFO_EHDR		33
+#endif
+
+/*
+ * More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
+ * value is -1, then the cache doesn't exist.  Otherwise:
+ *
+ *    bit 0-3:	  Cache set-associativity; 0 means fully associative.
+ *    bit 4-7:	  Log2 of cacheline size.
+ *    bit 8-31:	  Size of the entire cache >> 8.
+ */
+#define AT_L1I_CACHESHAPE	34
+#define AT_L1D_CACHESHAPE	35
+#define AT_L2_CACHESHAPE	36
+
+#endif /* __ASM_SH_AUXVEC_H */
diff --git a/arch/sh/include/asm/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
new file mode 100644
index 00000000000..a5907b94395
--- /dev/null
+++ b/arch/sh/include/asm/bitops-grb.h
@@ -0,0 +1,169 @@
+#ifndef __ASM_SH_BITOPS_GRB_H
+#define __ASM_SH_BITOPS_GRB_H
+
+static inline void set_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   or      %2,   %0      \n\t" /* or */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline void clear_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+	a += nr >> 5;
+        mask = ~(1 << (nr & 0x1f));
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   and     %2,   %0      \n\t" /* and */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+        int     mask;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   xor     %2,   %0      \n\t" /* xor */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+        int     mask, retval;
+	volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov   #-14,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t"
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+                "   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   or      %3,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+                "1: mov     r1,  r15      \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "=&r" (retval),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1" ,"t");
+
+        return retval;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+        int     mask, retval,not_mask;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+
+	not_mask = ~mask;
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov   #-14,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t" /* %1 = *a */
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+		"   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   and     %4,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "=&r" (retval),
+		  "+r"  (a)
+		: "r"   (mask),
+		  "r"   (not_mask)
+		: "memory" , "r0", "r1", "t");
+
+        return retval;
+}
+
+static inline int test_and_change_bit(int nr, volatile void * addr)
+{
+        int     mask, retval;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov   #-14,   r15     \n\t" /* LOGIN */
+                "   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t" /* %1 = *a */
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+                "   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   xor     %3,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "=&r" (retval),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1", "t");
+
+        return retval;
+}
+#endif /* __ASM_SH_BITOPS_GRB_H */
diff --git a/arch/sh/include/asm/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h
new file mode 100644
index 00000000000..653a1275058
--- /dev/null
+++ b/arch/sh/include/asm/bitops-irq.h
@@ -0,0 +1,91 @@
+#ifndef __ASM_SH_BITOPS_IRQ_H
+#define __ASM_SH_BITOPS_IRQ_H
+
+static inline void set_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a |= mask;
+	local_irq_restore(flags);
+}
+
+static inline void clear_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a &= ~mask;
+	local_irq_restore(flags);
+}
+
+static inline void change_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a ^= mask;
+	local_irq_restore(flags);
+}
+
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static inline int test_and_change_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+#endif /* __ASM_SH_BITOPS_IRQ_H */
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
new file mode 100644
index 00000000000..d7d382f63ee
--- /dev/null
+++ b/arch/sh/include/asm/bitops.h
@@ -0,0 +1,103 @@
+#ifndef __ASM_SH_BITOPS_H
+#define __ASM_SH_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm/system.h>
+/* For __swab32 */
+#include <asm/byteorder.h>
+
+#ifdef CONFIG_GUSA_RB
+#include <asm/bitops-grb.h>
+#else
+#include <asm/bitops-irq.h>
+#endif
+
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#ifdef CONFIG_SUPERH32
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bt/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+#else
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result, __d2, __d3;
+
+        __asm__("gettr  tr0, %2\n\t"
+                "pta    $+32, tr0\n\t"
+                "andi   %1, 1, %3\n\t"
+                "beq    %3, r63, tr0\n\t"
+                "pta    $+4, tr0\n"
+                "0:\n\t"
+                "shlri.l        %1, 1, %1\n\t"
+                "addi   %0, 1, %0\n\t"
+                "andi   %1, 1, %3\n\t"
+                "beqi   %3, 1, tr0\n"
+                "1:\n\t"
+                "ptabs  %2, tr0\n\t"
+                : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3)
+                : "0" (0L), "1" (word));
+
+	return result;
+}
+
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_BITOPS_H */
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
new file mode 100644
index 00000000000..c0171804016
--- /dev/null
+++ b/arch/sh/include/asm/bug.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_SH_BUG_H
+#define __ASM_SH_BUG_H
+
+#define TRAPA_BUG_OPCODE	0xc33e	/* trapa #0x3e */
+
+#ifdef CONFIG_GENERIC_BUG
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+
+/**
+ * _EMIT_BUG_ENTRY
+ * %1 - __FILE__
+ * %2 - __LINE__
+ * %3 - trap type
+ * %4 - sizeof(struct bug_entry)
+ *
+ * The trapa opcode itself sits in %0.
+ * The %O notation is used to avoid # generation.
+ *
+ * The offending file and line are encoded in the __bug_table section.
+ */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY				\
+	"\t.pushsection __bug_table,\"a\"\n"	\
+	"2:\t.long 1b, %O1\n"			\
+	"\t.short %O2, %O3\n"			\
+	"\t.org 2b+%O4\n"			\
+	"\t.popsection\n"
+#else
+#define _EMIT_BUG_ENTRY				\
+	"\t.pushsection __bug_table,\"a\"\n"	\
+	"2:\t.long 1b\n"			\
+	"\t.short %O3\n"			\
+	"\t.org 2b+%O4\n"			\
+	"\t.popsection\n"
+#endif
+
+#define BUG()						\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		_EMIT_BUG_ENTRY				\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__), "i" (0),		\
+		   "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#define __WARN()					\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		 _EMIT_BUG_ENTRY			\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__),			\
+		   "i" (BUGFLAG_WARNING),		\
+		   "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#define WARN_ON(x) ({						\
+	int __ret_warn_on = !!(x);				\
+	if (__builtin_constant_p(__ret_warn_on)) {		\
+		if (__ret_warn_on)				\
+			__WARN();				\
+	} else {						\
+		if (unlikely(__ret_warn_on))			\
+			__WARN();				\
+	}							\
+	unlikely(__ret_warn_on);				\
+})
+
+#endif /* CONFIG_GENERIC_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* __ASM_SH_BUG_H */
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
new file mode 100644
index 00000000000..121b2ecddfc
--- /dev/null
+++ b/arch/sh/include/asm/bugs.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_SH_BUGS_H
+#define __ASM_SH_BUGS_H
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+/*
+ * I don't know of any Super-H bugs yet.
+ */
+
+#include <asm/processor.h>
+
+static void __init check_bugs(void)
+{
+	extern unsigned long loops_per_jiffy;
+	char *p = &init_utsname()->machine[2]; /* "sh" */
+
+	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
+
+	switch (current_cpu_data.type) {
+	case CPU_SH7619:
+		*p++ = '2';
+		break;
+	case CPU_SH7203 ... CPU_MXG:
+		*p++ = '2';
+		*p++ = 'a';
+		break;
+	case CPU_SH7705 ... CPU_SH7729:
+		*p++ = '3';
+		break;
+	case CPU_SH7750 ... CPU_SH4_501:
+		*p++ = '4';
+		break;
+	case CPU_SH7763 ... CPU_SHX3:
+		*p++ = '4';
+		*p++ = 'a';
+		break;
+	case CPU_SH7343 ... CPU_SH7366:
+		*p++ = '4';
+		*p++ = 'a';
+		*p++ = 'l';
+		*p++ = '-';
+		*p++ = 'd';
+		*p++ = 's';
+		*p++ = 'p';
+		break;
+	case CPU_SH5_101 ... CPU_SH5_103:
+		*p++ = '6';
+		*p++ = '4';
+		break;
+	case CPU_SH_NONE:
+		/*
+		 * Specifically use CPU_SH_NONE rather than default:,
+		 * so we're able to have the compiler whine about
+		 * unhandled enumerations.
+		 */
+		break;
+	}
+
+	printk("CPU: %s\n", get_cpu_subtype(&current_cpu_data));
+
+#ifndef __LITTLE_ENDIAN__
+	/* 'eb' means 'Endian Big' */
+	*p++ = 'e';
+	*p++ = 'b';
+#endif
+	*p = '\0';
+}
+#endif /* __ASM_SH_BUGS_H */
diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h
new file mode 100644
index 00000000000..4c13e611756
--- /dev/null
+++ b/arch/sh/include/asm/byteorder.h
@@ -0,0 +1,70 @@
+#ifndef __ASM_SH_BYTEORDER_H
+#define __ASM_SH_BYTEORDER_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ */
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__asm__(
+#ifdef __SH5__
+		"byterev	%0, %0\n\t"
+		"shari		%0, 32, %0"
+#else
+		"swap.b		%0, %0\n\t"
+		"swap.w		%0, %0\n\t"
+		"swap.b		%0, %0"
+#endif
+		: "=r" (x)
+		: "0" (x));
+
+	return x;
+}
+
+static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__(
+#ifdef __SH5__
+		"byterev	%0, %0\n\t"
+		"shari		%0, 32, %0"
+#else
+		"swap.b		%0, %0"
+#endif
+		: "=r" (x)
+		:  "0" (x));
+
+	return x;
+}
+
+static inline __u64 ___arch__swab64(__u64 val)
+{
+	union {
+		struct { __u32 a,b; } s;
+		__u64 u;
+	} v, w;
+	v.u = val;
+	w.s.b = ___arch__swab32(v.s.a);
+	w.s.a = ___arch__swab32(v.s.b);
+	return w.u;
+}
+
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __LITTLE_ENDIAN__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* __ASM_SH_BYTEORDER_H */
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
new file mode 100644
index 00000000000..02df18ea960
--- /dev/null
+++ b/arch/sh/include/asm/cache.h
@@ -0,0 +1,51 @@
+/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
+ *
+ * include/asm-sh/cache.h
+ *
+ * Copyright 1999 (C) Niibe Yutaka
+ * Copyright 2002, 2003 (C) Paul Mundt
+ */
+#ifndef __ASM_SH_CACHE_H
+#define __ASM_SH_CACHE_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <cpu/cache.h>
+
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifndef __ASSEMBLY__
+struct cache_info {
+	unsigned int ways;		/* Number of cache ways */
+	unsigned int sets;		/* Number of cache sets */
+	unsigned int linesz;		/* Cache line size (bytes) */
+
+	unsigned int way_size;		/* sets * line size */
+
+	/*
+	 * way_incr is the address offset for accessing the next way
+	 * in memory mapped cache array ops.
+	 */
+	unsigned int way_incr;
+	unsigned int entry_shift;
+	unsigned int entry_mask;
+
+	/*
+	 * Compute a mask which selects the address bits which overlap between
+	 * 1. those used to select the cache set during indexing
+	 * 2. those in the physical page number.
+	 */
+	unsigned int alias_mask;
+
+	unsigned int n_aliases;		/* Number of aliases */
+
+	unsigned long flags;
+};
+
+int __init detect_cpu_and_cache_system(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHE_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
new file mode 100644
index 00000000000..09acbc32d6c
--- /dev/null
+++ b/arch/sh/include/asm/cacheflush.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_SH_CACHEFLUSH_H
+#define __ASM_SH_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_CACHE_OFF
+/*
+ * Nothing to do when the cache is disabled, initial flush and explicit
+ * disabling is handled at CPU init time.
+ *
+ * See arch/sh/kernel/cpu/init.c:cache_init().
+ */
+#define p3_cache_init()				do { } while (0)
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define __flush_wback_region(start, size)	do { (void)(start); } while (0)
+#define __flush_purge_region(start, size)	do { (void)(start); } while (0)
+#define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
+#else
+#include <cpu/cacheflush.h>
+
+/*
+ * Consistent DMA requires that the __flush_xxx() primitives must be set
+ * for any of the enabled non-coherent caches (most of the UP CPUs),
+ * regardless of PIPT or VIPT cache configurations.
+ */
+
+/* Flush (write-back only) a region (smaller than a page) */
+extern void __flush_wback_region(void *start, int size);
+/* Flush (write-back & invalidate) a region (smaller than a page) */
+extern void __flush_purge_region(void *start, int size);
+/* Flush (invalidate only) a region (smaller than a page) */
+extern void __flush_invalidate_region(void *start, int size);
+#endif
+
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	flush_dcache_page(page);
+}
+
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
+extern void copy_to_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+extern void copy_from_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+#else
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+		flush_icache_user_range(vma, page, vaddr, len);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+#endif
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h
new file mode 100644
index 00000000000..67496ab0ef0
--- /dev/null
+++ b/arch/sh/include/asm/checksum.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_SUPERH32
+# include "checksum_32.h"
+#else
+# include "checksum_64.h"
+#endif
diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h
new file mode 100644
index 00000000000..14b7ac2f0a0
--- /dev/null
+++ b/arch/sh/include/asm/checksum_32.h
@@ -0,0 +1,215 @@
+#ifndef __ASM_SH_CHECKSUM_H
+#define __ASM_SH_CHECKSUM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka
+ */
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
+					    int len, __wsum sum,
+					    int *src_err_ptr, int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+static inline
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+				 int len, __wsum sum)
+{
+	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
+}
+
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+				   int len, __wsum sum, int *err_ptr)
+{
+	return csum_partial_copy_generic((__force const void *)src, dst,
+					len, sum, err_ptr, NULL);
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int __dummy;
+	__asm__("swap.w %0, %1\n\t"
+		"extu.w	%0, %0\n\t"
+		"extu.w	%1, %1\n\t"
+		"add	%1, %0\n\t"
+		"swap.w	%0, %1\n\t"
+		"add	%1, %0\n\t"
+		"not	%0, %0\n\t"
+		: "=r" (sum), "=&r" (__dummy)
+		: "0" (sum)
+		: "t");
+	return (__force __sum16)sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *      i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
+ *      for linux by * Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum, __dummy0, __dummy1;
+
+	__asm__ __volatile__(
+		"mov.l	@%1+, %0\n\t"
+		"mov.l	@%1+, %3\n\t"
+		"add	#-2, %2\n\t"
+		"clrt\n\t"
+		"1:\t"
+		"addc	%3, %0\n\t"
+		"movt	%4\n\t"
+		"mov.l	@%1+, %3\n\t"
+		"dt	%2\n\t"
+		"bf/s	1b\n\t"
+		" cmp/eq #1, %4\n\t"
+		"addc	%3, %0\n\t"
+		"addc	%2, %0"	    /* Here %2 is 0, add carry-bit */
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
+	: "1" (iph), "2" (ihl)
+	: "t", "memory");
+
+	return	csum_fold(sum);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+#ifdef __LITTLE_ENDIAN__
+	unsigned long len_proto = (proto + len) << 8;
+#else
+	unsigned long len_proto = proto + len;
+#endif
+	__asm__("clrt\n\t"
+		"addc	%0, %1\n\t"
+		"addc	%2, %1\n\t"
+		"addc	%3, %1\n\t"
+		"movt	%0\n\t"
+		"add	%1, %0"
+		: "=r" (sum), "=r" (len_proto)
+		: "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
+		: "t");
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+    return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	unsigned int __dummy;
+	__asm__("clrt\n\t"
+		"mov.l	@(0,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(4,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(8,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(12,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(0,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(4,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(8,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(12,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"addc	%4, %0\n\t"
+		"addc	%5, %0\n\t"
+		"movt	%1\n\t"
+		"add	%1, %0\n"
+		: "=r" (sum), "=&r" (__dummy)
+		: "r" (saddr), "r" (daddr),
+		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+		: "t");
+
+	return csum_fold(sum);
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline __wsum csum_and_copy_to_user(const void *src,
+					   void __user *dst,
+					   int len, __wsum sum,
+					   int *err_ptr)
+{
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return csum_partial_copy_generic((__force const void *)src,
+						dst, len, sum, NULL, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+#endif /* __ASM_SH_CHECKSUM_H */
diff --git a/arch/sh/include/asm/checksum_64.h b/arch/sh/include/asm/checksum_64.h
new file mode 100644
index 00000000000..9c62a031a8f
--- /dev/null
+++ b/arch/sh/include/asm/checksum_64.h
@@ -0,0 +1,78 @@
+#ifndef __ASM_SH_CHECKSUM_64_H
+#define __ASM_SH_CHECKSUM_64_H
+
+/*
+ * include/asm-sh/checksum_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len,
+				       __wsum sum);
+
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					 int len, __wsum sum, int *err_ptr);
+
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+        sum = (sum & 0xffff) + (sum >> 16);
+        sum = (sum & 0xffff) + (sum >> 16);
+        return (__force __sum16)~sum;
+}
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+				 unsigned short len, unsigned short proto,
+				 __wsum sum);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* __ASM_SH_CHECKSUM_64_H */
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
new file mode 100644
index 00000000000..720dfab7b15
--- /dev/null
+++ b/arch/sh/include/asm/clock.h
@@ -0,0 +1,97 @@
+#ifndef __ASM_SH_CLOCK_H
+#define __ASM_SH_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+struct clk;
+
+struct clk_ops {
+	void (*init)(struct clk *clk);
+	void (*enable)(struct clk *clk);
+	void (*disable)(struct clk *clk);
+	void (*recalc)(struct clk *clk);
+	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+	long (*round_rate)(struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+	struct list_head	node;
+	const char		*name;
+	int			id;
+	struct module		*owner;
+
+	struct clk		*parent;
+	struct clk_ops		*ops;
+
+	struct kref		kref;
+
+	unsigned long		rate;
+	unsigned long		flags;
+	unsigned long		arch_flags;
+};
+
+#define CLK_ALWAYS_ENABLED	(1 << 0)
+#define CLK_RATE_PROPAGATES	(1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+/* arch/sh/kernel/cpu/clock.c */
+int clk_init(void);
+
+void clk_recalc_rate(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+static inline int clk_always_enable(const char *id)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, id);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = clk_enable(clk);
+	if (ret)
+		clk_put(clk);
+
+	return ret;
+}
+
+/* the exported API, in addition to clk_set_rate */
+/**
+ * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ * @algo_id: algorithm id to be passed down to ops->set_rate
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
+
+enum clk_sh_algo_id {
+	NO_CHANGE = 0,
+
+	IUS_N1_N1,
+	IUS_322,
+	IUS_522,
+	IUS_N11,
+
+	SB_N1,
+
+	SB3_N1,
+	SB3_32,
+	SB3_43,
+	SB3_54,
+
+	BP_N1,
+
+	IP_N1,
+};
+#endif /* __ASM_SH_CLOCK_H */
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
new file mode 100644
index 00000000000..e2681abe764
--- /dev/null
+++ b/arch/sh/include/asm/cmpxchg-grb.h
@@ -0,0 +1,70 @@
+#ifndef __ASM_SH_CMPXCHG_GRB_H
+#define __ASM_SH_CMPXCHG_GRB_H
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   nop                   \n\t"
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-4,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   mov.l   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m)
+		: "r"   (val)
+		: "memory", "r0", "r1");
+
+	return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align  2             \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN */
+		"   mov.b  @%1,   %0      \n\t" /* load  old value */
+		"   extu.b  %0,   %0      \n\t" /* extend as unsigned */
+		"   mov.b   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m)
+		: "r"   (val)
+		: "memory" , "r0", "r1");
+
+	return retval;
+}
+
+static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
+					  unsigned long new)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align  2             \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   nop                   \n\t"
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-8,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   cmp/eq  %0,   %2      \n\t"
+		"   bf            1f      \n\t" /* if not equal */
+		"   mov.l   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m)
+		: "r"   (new)
+		: "memory" , "r0", "r1", "t");
+
+	return retval;
+}
+
+#endif /* __ASM_SH_CMPXCHG_GRB_H */
diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
new file mode 100644
index 00000000000..43049ec0554
--- /dev/null
+++ b/arch/sh/include/asm/cmpxchg-irq.h
@@ -0,0 +1,40 @@
+#ifndef __ASM_SH_CMPXCHG_IRQ_H
+#define __ASM_SH_CMPXCHG_IRQ_H
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val & 0xff;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
+	unsigned long new)
+{
+	__u32 retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);       /* implies memory barrier  */
+	return retval;
+}
+
+#endif /* __ASM_SH_CMPXCHG_IRQ_H */
diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h
new file mode 100644
index 00000000000..86308aa3973
--- /dev/null
+++ b/arch/sh/include/asm/cpu-features.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_SH_CPU_FEATURES_H
+#define __ASM_SH_CPU_FEATURES_H
+
+/*
+ * Processor flags
+ *
+ * Note: When adding a new flag, keep cpu_flags[] in
+ * arch/sh/kernel/setup.c in sync so symbolic name
+ * mapping of the processor flags has a chance of being
+ * reasonably accurate.
+ *
+ * These flags are also available through the ELF
+ * auxiliary vector as AT_HWCAP.
+ */
+#define CPU_HAS_FPU		0x0001	/* Hardware FPU support */
+#define CPU_HAS_P2_FLUSH_BUG	0x0002	/* Need to flush the cache in P2 area */
+#define CPU_HAS_MMU_PAGE_ASSOC	0x0004	/* SH3: TLB way selection bit support */
+#define CPU_HAS_DSP		0x0008	/* SH-DSP: DSP support */
+#define CPU_HAS_PERF_COUNTER	0x0010	/* Hardware performance counters */
+#define CPU_HAS_PTEA		0x0020	/* PTEA register */
+#define CPU_HAS_LLSC		0x0040	/* movli.l/movco.l */
+#define CPU_HAS_L2_CACHE	0x0080	/* Secondary cache / URAM */
+#define CPU_HAS_OP32		0x0100	/* 32-bit instruction support */
+
+#endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h
new file mode 100644
index 00000000000..6ca395d1393
--- /dev/null
+++ b/arch/sh/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SH_CPUTIME_H
+#define __SH_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SH_CPUTIME_H */
diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h
new file mode 100644
index 00000000000..62b63880b33
--- /dev/null
+++ b/arch/sh/include/asm/current.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SH_CURRENT_H
+#define __ASM_SH_CURRENT_H
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static __inline__ struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current get_current()
+
+#endif /* __ASM_SH_CURRENT_H */
diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h
new file mode 100644
index 00000000000..4b16bf9b56b
--- /dev/null
+++ b/arch/sh/include/asm/delay.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_SH_DELAY_H
+#define __ASM_SH_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/sh/lib/delay.c
+ */
+
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long xloops);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
+	__udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+#endif /* __ASM_SH_DELAY_H */
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
new file mode 100644
index 00000000000..efd511d0803
--- /dev/null
+++ b/arch/sh/include/asm/device.h
@@ -0,0 +1,12 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
+struct platform_device;
+/* allocate contiguous memory chunk and fill in struct resource */
+int platform_resource_setup_memory(struct platform_device *pdev,
+				   char *name, unsigned long memsize);
+
diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/sh/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..627315ecdb5
--- /dev/null
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -0,0 +1,193 @@
+#ifndef __ASM_SH_DMA_MAPPING_H
+#define __ASM_SH_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm-generic/dma-coherent.h>
+
+extern struct bus_type pci_bus_type;
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+		       void *vaddr, dma_addr_t dma_handle);
+
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		    enum dma_data_direction dir);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h) (1)
+
+static inline dma_addr_t dma_map_single(struct device *dev,
+					void *ptr, size_t size,
+					enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return virt_to_phys(ptr);
+#endif
+	dma_cache_sync(dev, ptr, size, dir);
+
+	return virt_to_phys(ptr);
+}
+
+#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#endif
+		sg[i].dma_address = sg_phys(&sg[i]);
+	}
+
+	return nents;
+}
+
+#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size, enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, dma_address, size, dir);
+}
+
+static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+				   size_t size, enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
+}
+
+static inline void dma_sync_single_range(struct device *dev,
+					 dma_addr_t dma_handle,
+					 unsigned long offset, size_t size,
+					 enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
+}
+
+static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+			       int nelems, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nelems; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#endif
+		sg[i].dma_address = sg_phys(&sg[i]);
+	}
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction dir)
+{
+	dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      enum dma_data_direction dir)
+{
+	dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction direction)
+{
+	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+}
+
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction dir)
+{
+	dma_sync_sg(dev, sg, nelems, dir);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					  struct scatterlist *sg, int nelems,
+					  enum dma_data_direction dir)
+{
+	dma_sync_sg(dev, sg, nelems, dir);
+}
+
+
+static inline int dma_get_cache_alignment(void)
+{
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr == 0;
+}
+
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size);
+
+#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
new file mode 100644
index 00000000000..beca7128e2a
--- /dev/null
+++ b/arch/sh/include/asm/dma.h
@@ -0,0 +1,166 @@
+/*
+ * include/asm-sh/dma.h
+ *
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DMA_H
+#define __ASM_SH_DMA_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/sysdev.h>
+#include <cpu/dma.h>
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
+   occurrence should be flagged as an error.  */
+/* But... */
+/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
+
+#ifdef CONFIG_NR_DMA_CHANNELS
+#  define MAX_DMA_CHANNELS	(CONFIG_NR_DMA_CHANNELS)
+#else
+#  define MAX_DMA_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
+#endif
+
+/*
+ * Read and write modes can mean drastically different things depending on the
+ * channel configuration. Consult your DMAC documentation and module
+ * implementation for further clues.
+ */
+#define DMA_MODE_READ		0x00
+#define DMA_MODE_WRITE		0x01
+#define DMA_MODE_MASK		0x01
+
+#define DMA_AUTOINIT		0x10
+
+/*
+ * DMAC (dma_info) flags
+ */
+enum {
+	DMAC_CHANNELS_CONFIGURED	= 0x01,
+	DMAC_CHANNELS_TEI_CAPABLE	= 0x02,	/* Transfer end interrupt */
+};
+
+/*
+ * DMA channel capabilities / flags
+ */
+enum {
+	DMA_CONFIGURED			= 0x01,
+
+	/*
+	 * Transfer end interrupt, inherited from DMAC.
+	 * wait_queue used in dma_wait_for_completion.
+	 */
+	DMA_TEI_CAPABLE			= 0x02,
+};
+
+extern spinlock_t dma_spin_lock;
+
+struct dma_channel;
+
+struct dma_ops {
+	int (*request)(struct dma_channel *chan);
+	void (*free)(struct dma_channel *chan);
+
+	int (*get_residue)(struct dma_channel *chan);
+	int (*xfer)(struct dma_channel *chan);
+	int (*configure)(struct dma_channel *chan, unsigned long flags);
+	int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
+};
+
+struct dma_channel {
+	char dev_id[16];		/* unique name per DMAC of channel */
+
+	unsigned int chan;		/* DMAC channel number */
+	unsigned int vchan;		/* Virtual channel number */
+
+	unsigned int mode;
+	unsigned int count;
+
+	unsigned long sar;
+	unsigned long dar;
+
+	const char **caps;
+
+	unsigned long flags;
+	atomic_t busy;
+
+	wait_queue_head_t wait_queue;
+
+	struct sys_device dev;
+	void *priv_data;
+};
+
+struct dma_info {
+	struct platform_device *pdev;
+
+	const char *name;
+	unsigned int nr_channels;
+	unsigned long flags;
+
+	struct dma_ops *ops;
+	struct dma_channel *channels;
+
+	struct list_head list;
+	int first_channel_nr;
+	int first_vchannel_nr;
+};
+
+struct dma_chan_caps {
+	int ch_num;
+	const char **caplist;
+};
+
+#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
+
+/* arch/sh/drivers/dma/dma-api.c */
+extern int dma_xfer(unsigned int chan, unsigned long from,
+		    unsigned long to, size_t size, unsigned int mode);
+
+#define dma_write(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
+#define dma_write_page(chan, from, to)	\
+	dma_write(chan, from, to, PAGE_SIZE)
+
+#define dma_read(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_READ)
+#define dma_read_page(chan, from, to)	\
+	dma_read(chan, from, to, PAGE_SIZE)
+
+extern int request_dma_bycap(const char **dmac, const char **caps,
+			     const char *dev_id);
+extern int request_dma(unsigned int chan, const char *dev_id);
+extern void free_dma(unsigned int chan);
+extern int get_dma_residue(unsigned int chan);
+extern struct dma_info *get_dma_info(unsigned int chan);
+extern struct dma_channel *get_dma_channel(unsigned int chan);
+extern void dma_wait_for_completion(unsigned int chan);
+extern void dma_configure_channel(unsigned int chan, unsigned long flags);
+
+extern int register_dmac(struct dma_info *info);
+extern void unregister_dmac(struct dma_info *info);
+extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
+
+extern int dma_extend(unsigned int chan, unsigned long op, void *param);
+extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
+
+/* arch/sh/drivers/dma/dma-sysfs.c */
+extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
+extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_DMA_H */
diff --git a/arch/sh/include/asm/dmabrg.h b/arch/sh/include/asm/dmabrg.h
new file mode 100644
index 00000000000..c5edba216cf
--- /dev/null
+++ b/arch/sh/include/asm/dmabrg.h
@@ -0,0 +1,23 @@
+/*
+ * SH7760 DMABRG (USB/Audio) support
+ */
+
+#ifndef _DMABRG_H_
+#define _DMABRG_H_
+
+/* IRQ sources */
+#define DMABRGIRQ_USBDMA	0
+#define DMABRGIRQ_USBDMAERR	1
+#define DMABRGIRQ_A0TXF		2
+#define DMABRGIRQ_A0TXH		3
+#define DMABRGIRQ_A0RXF		4
+#define DMABRGIRQ_A0RXH		5
+#define DMABRGIRQ_A1TXF		6
+#define DMABRGIRQ_A1TXH		7
+#define DMABRGIRQ_A1RXF		8
+#define DMABRGIRQ_A1RXH		9
+
+extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *);
+extern void dmabrg_free_irq(unsigned int);
+
+#endif
diff --git a/arch/sh/include/asm/edosk7705.h b/arch/sh/include/asm/edosk7705.h
new file mode 100644
index 00000000000..5bdc9d9be3d
--- /dev/null
+++ b/arch/sh/include/asm/edosk7705.h
@@ -0,0 +1,30 @@
+/*
+ * include/asm-sh/edosk7705.h
+ *
+ * Modified version of io_se.h for the EDOSK7705 specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Hitachi EDOSK7705 development board
+ */
+
+#ifndef __ASM_SH_EDOSK7705_IO_H
+#define __ASM_SH_EDOSK7705_IO_H
+
+#include <asm/io_generic.h>
+
+extern unsigned char sh_edosk7705_inb(unsigned long port);
+extern unsigned int sh_edosk7705_inl(unsigned long port);
+
+extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
+extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
+
+extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
+
+#endif /* __ASM_SH_EDOSK7705_IO_H */
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
new file mode 100644
index 00000000000..f01449a8d37
--- /dev/null
+++ b/arch/sh/include/asm/elf.h
@@ -0,0 +1,244 @@
+#ifndef __ASM_SH_ELF_H
+#define __ASM_SH_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/auxvec.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* ELF header e_flags defines */
+#define EF_SH_PIC		0x100	/* -fpic */
+#define EF_SH_FDPIC		0x8000	/* -mfdpic */
+
+/* SH (particularly SHcompact) relocation types  */
+#define	R_SH_NONE		0
+#define	R_SH_DIR32		1
+#define	R_SH_REL32		2
+#define	R_SH_DIR8WPN		3
+#define	R_SH_IND12W		4
+#define	R_SH_DIR8WPL		5
+#define	R_SH_DIR8WPZ		6
+#define	R_SH_DIR8BP		7
+#define	R_SH_DIR8W		8
+#define	R_SH_DIR8L		9
+#define	R_SH_SWITCH16		25
+#define	R_SH_SWITCH32		26
+#define	R_SH_USES		27
+#define	R_SH_COUNT		28
+#define	R_SH_ALIGN		29
+#define	R_SH_CODE		30
+#define	R_SH_DATA		31
+#define	R_SH_LABEL		32
+#define	R_SH_SWITCH8		33
+#define	R_SH_GNU_VTINHERIT	34
+#define	R_SH_GNU_VTENTRY	35
+#define	R_SH_TLS_GD_32		144
+#define	R_SH_TLS_LD_32		145
+#define	R_SH_TLS_LDO_32		146
+#define	R_SH_TLS_IE_32		147
+#define	R_SH_TLS_LE_32		148
+#define	R_SH_TLS_DTPMOD32	149
+#define	R_SH_TLS_DTPOFF32	150
+#define	R_SH_TLS_TPOFF32	151
+#define	R_SH_GOT32		160
+#define	R_SH_PLT32		161
+#define	R_SH_COPY		162
+#define	R_SH_GLOB_DAT		163
+#define	R_SH_JMP_SLOT		164
+#define	R_SH_RELATIVE		165
+#define	R_SH_GOTOFF		166
+#define	R_SH_GOTPC		167
+
+/* FDPIC relocs */
+#define R_SH_GOT20		70
+#define R_SH_GOTOFF20		71
+#define R_SH_GOTFUNCDESC	72
+#define R_SH_GOTFUNCDESC20	73
+#define R_SH_GOTOFFFUNCDESC	74
+#define R_SH_GOTOFFFUNCDESC20	75
+#define R_SH_FUNCDESC		76
+#define R_SH_FUNCDESC_VALUE	77
+
+#if 0 /* XXX - later .. */
+#define R_SH_GOT20		198
+#define R_SH_GOTOFF20		199
+#define R_SH_GOTFUNCDESC	200
+#define R_SH_GOTFUNCDESC20	201
+#define R_SH_GOTOFFFUNCDESC	202
+#define R_SH_GOTOFFFUNCDESC20	203
+#define R_SH_FUNCDESC		204
+#define R_SH_FUNCDESC_VALUE	205
+#endif
+
+/* SHmedia relocs */
+#define R_SH_IMM_LOW16		246
+#define R_SH_IMM_LOW16_PCREL	247
+#define R_SH_IMM_MEDLOW16	248
+#define R_SH_IMM_MEDLOW16_PCREL	249
+/* Keep this the last entry.  */
+#define	R_SH_NUM		256
+
+/*
+ * ELF register definitions..
+ */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_SH
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == EM_SH)
+#define elf_check_fdpic(x)		((x)->e_flags & EF_SH_FDPIC)
+#define elf_check_const_displacement(x)	((x)->e_flags & EF_SH_PIC)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS	EF_SH_FDPIC
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)				\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(boot_cpu_data.flags)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(utsname()->machine)
+
+#ifdef __SH5__
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
+       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
+       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
+       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
+       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
+       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
+       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
+       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
+       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
+       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
+       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
+       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
+       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
+       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
+       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
+       _r->sr = SR_FD | SR_MMU; } while (0)
+#else
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr,	\
+			    _dynamic_addr)				\
+do {									\
+	_r->regs[0]	= 0;						\
+	_r->regs[1]	= 0;						\
+	_r->regs[2]	= 0;						\
+	_r->regs[3]	= 0;						\
+	_r->regs[4]	= 0;						\
+	_r->regs[5]	= 0;						\
+	_r->regs[6]	= 0;						\
+	_r->regs[7]	= 0;						\
+	_r->regs[8]	= _exec_map_addr;				\
+	_r->regs[9]	= _interp_map_addr;				\
+	_r->regs[10]	= _dynamic_addr;				\
+	_r->regs[11]	= 0;						\
+	_r->regs[12]	= 0;						\
+	_r->regs[13]	= 0;						\
+	_r->regs[14]	= 0;						\
+	_r->sr		= SR_FD;					\
+} while (0)
+#endif
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+struct task_struct;
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#ifdef CONFIG_VSYSCALL
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+
+extern unsigned int vdso_enabled;
+extern void __kernel_vsyscall;
+
+#define VDSO_BASE		((unsigned long)current->mm->context.vdso)
+#define VDSO_SYM(x)		(VDSO_BASE + (unsigned long)(x))
+
+#define VSYSCALL_AUX_ENT					\
+	if (vdso_enabled)					\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+#else
+#define VSYSCALL_AUX_ENT
+#endif /* CONFIG_VSYSCALL */
+
+#ifdef CONFIG_SH_FPU
+#define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
+#else
+#define FPU_AUX_ENT
+#endif
+
+extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO						\
+do {								\
+	/* Optional FPU initialization */			\
+	FPU_AUX_ENT;						\
+								\
+	/* Optional vsyscall entry */				\
+	VSYSCALL_AUX_ENT;					\
+								\
+	/* Cache desc */					\
+	NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape);	\
+	NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape);	\
+	NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape);		\
+} while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ELF_H */
diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/sh/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
new file mode 100644
index 00000000000..2dab0b8d945
--- /dev/null
+++ b/arch/sh/include/asm/entry-macros.S
@@ -0,0 +1,33 @@
+! entry.S macro define
+	
+	.macro	cli
+	stc	sr, r0
+	or	#0xf0, r0
+	ldc	r0, sr
+	.endm
+
+	.macro	sti
+	mov	#0xf0, r11
+	extu.b	r11, r11
+	not	r11, r11
+	stc	sr, r10
+	and	r11, r10
+#ifdef CONFIG_CPU_HAS_SR_RB
+	stc	k_g_imask, r11
+	or	r11, r10
+#endif
+	ldc	r10, sr
+	.endm
+
+	.macro	get_current_thread_info, ti, tmp
+#ifdef CONFIG_CPU_HAS_SR_RB
+	stc	r7_bank, \ti
+#else
+	mov	#((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
+	shll8	\tmp
+	shll2	\tmp
+	mov	r15, \ti
+	and	\tmp, \ti
+#endif	
+	.endm
+
diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h
new file mode 100644
index 00000000000..51cf6f9cebb
--- /dev/null
+++ b/arch/sh/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_ERRNO_H
+#define __ASM_SH_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* __ASM_SH_ERRNO_H */
diff --git a/arch/sh/include/asm/fb.h b/arch/sh/include/asm/fb.h
new file mode 100644
index 00000000000..d92e99cd8c8
--- /dev/null
+++ b/arch/sh/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h
new file mode 100644
index 00000000000..46ab12db573
--- /dev/null
+++ b/arch/sh/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
new file mode 100644
index 00000000000..721fcc4d5e9
--- /dev/null
+++ b/arch/sh/include/asm/fixmap.h
@@ -0,0 +1,117 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of P3 backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#define FIX_N_COLOURS 16
+	FIX_CMAP_BEGIN,
+	FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+	FIX_UNCACHED,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap(enum fixed_addresses idx,
+			 unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#ifdef CONFIG_SUPERH32
+#define FIXADDR_TOP	(P4SEG - PAGE_SIZE)
+#else
+#define FIXADDR_TOP	(0xff000000 - PAGE_SIZE)
+#endif
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+#endif
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
new file mode 100644
index 00000000000..d3b2b4f109e
--- /dev/null
+++ b/arch/sh/include/asm/flat.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-sh/flat.h
+ *
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __ASM_SH_FLAT_H
+#define __ASM_SH_FLAT_H
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		0
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		({ (void)p; 0; })
+
+#define FLAT_PLAT_INIT(_r) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#endif /* __ASM_SH_FLAT_H */
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
new file mode 100644
index 00000000000..91462fea150
--- /dev/null
+++ b/arch/sh/include/asm/fpu.h
@@ -0,0 +1,55 @@
+#ifndef __ASM_SH_FPU_H
+#define __ASM_SH_FPU_H
+
+#ifndef __ASSEMBLY__
+#include <linux/preempt.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_SH_FPU
+static inline void release_fpu(struct pt_regs *regs)
+{
+	regs->sr |= SR_FD;
+}
+
+static inline void grab_fpu(struct pt_regs *regs)
+{
+	regs->sr &= ~SR_FD;
+}
+
+struct task_struct;
+
+extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
+#else
+
+#define release_fpu(regs)	do { } while (0)
+#define grab_fpu(regs)		do { } while (0)
+
+static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+}
+#endif
+
+extern int do_fpu_inst(unsigned short, struct pt_regs *);
+
+static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	preempt_disable();
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
+		save_fpu(tsk, regs);
+	preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	preempt_disable();
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+		clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+		release_fpu(regs);
+	}
+	preempt_enable();
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_FPU_H */
diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h
new file mode 100644
index 00000000000..4ece90b09b9
--- /dev/null
+++ b/arch/sh/include/asm/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_FREQ_H
+#define __ASM_SH_FREQ_H
+#ifdef __KERNEL__
+
+#include <cpu/freq.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FREQ_H */
diff --git a/arch/sh/include/asm/futex-irq.h b/arch/sh/include/asm/futex-irq.h
new file mode 100644
index 00000000000..a9f16a7f9ae
--- /dev/null
+++ b/arch/sh/include/asm/futex-irq.h
@@ -0,0 +1,111 @@
+#ifndef __ASM_SH_FUTEX_IRQ_H
+#define __ASM_SH_FUTEX_IRQ_H
+
+#include <asm/system.h>
+
+static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr,
+					   int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr,
+					   int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(*oldval + oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr,
+					  int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(*oldval | oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr,
+					   int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(*oldval & oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr,
+					   int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(*oldval ^ oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr,
+						   int oldval, int newval)
+{
+	unsigned long flags;
+	int ret, prev = 0;
+
+	local_irq_save(flags);
+
+	ret = get_user(prev, uaddr);
+	if (!ret && oldval == prev)
+		ret = put_user(newval, uaddr);
+
+	local_irq_restore(flags);
+
+	if (ret)
+		return ret;
+
+	return prev;
+}
+
+#endif /* __ASM_SH_FUTEX_IRQ_H */
diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h
new file mode 100644
index 00000000000..68256ec5fa3
--- /dev/null
+++ b/arch/sh/include/asm/futex.h
@@ -0,0 +1,77 @@
+#ifndef __ASM_SH_FUTEX_H
+#define __ASM_SH_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+/* XXX: UP variants, fix for SH-4A and SMP.. */
+#include <asm/futex-irq.h>
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_ADD:
+		ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_OR:
+		ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_ANDN:
+		ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_XOR:
+		ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval);
+		break;
+	default:
+		ret = -ENOSYS;
+		break;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval);
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FUTEX_H */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
new file mode 100644
index 00000000000..cf32bd2df88
--- /dev/null
+++ b/arch/sh/include/asm/gpio.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-sh/gpio.h
+ *
+ *  Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ *  Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_GPIO_H
+#define __ASM_SH_GPIO_H
+
+#if defined(CONFIG_CPU_SH3)
+#include <cpu/gpio.h>
+#endif
+
+#endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
new file mode 100644
index 00000000000..715ee237fc7
--- /dev/null
+++ b/arch/sh/include/asm/hardirq.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SH_HARDIRQ_H
+#define __ASM_SH_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
new file mode 100644
index 00000000000..8c1353baf00
--- /dev/null
+++ b/arch/sh/include/asm/hd64461.h
@@ -0,0 +1,250 @@
+#ifndef __ASM_SH_HD64461
+#define __ASM_SH_HD64461
+/*
+ *	Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *	Copyright (C) 2004 Paul Mundt
+ *	Copyright (C) 2000 YAEGASHI Takeshi
+ *
+ *		Hitachi HD64461 companion chip support
+ *	(please note manual reference 0x10000000 = 0xb0000000)
+ */
+
+/* Constants for PCMCIA mappings */
+#define	HD64461_PCC_WINDOW	0x01000000
+
+/* Area 6 - Slot 0 - memory and/or IO card */
+#define	HD64461_PCC0_BASE	(CONFIG_HD64461_IOBASE + 0x8000000)
+#define	HD64461_PCC0_ATTR	(HD64461_PCC0_BASE)				/* 0xb80000000 */
+#define	HD64461_PCC0_COMM	(HD64461_PCC0_BASE+HD64461_PCC_WINDOW)		/* 0xb90000000 */
+#define	HD64461_PCC0_IO		(HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW)	/* 0xba0000000 */
+
+/* Area 5 - Slot 1 - memory card only */
+#define	HD64461_PCC1_BASE	(CONFIG_HD64461_IOBASE + 0x4000000)
+#define	HD64461_PCC1_ATTR	(HD64461_PCC1_BASE)				/* 0xb4000000 */
+#define	HD64461_PCC1_COMM	(HD64461_PCC1_BASE+HD64461_PCC_WINDOW)		/* 0xb5000000 */
+
+/* Standby Control Register for HD64461 */
+#define	HD64461_STBCR			CONFIG_HD64461_IOBASE
+#define	HD64461_STBCR_CKIO_STBY		0x2000
+#define	HD64461_STBCR_SAFECKE_IST	0x1000
+#define	HD64461_STBCR_SLCKE_IST		0x0800
+#define	HD64461_STBCR_SAFECKE_OST	0x0400
+#define	HD64461_STBCR_SLCKE_OST		0x0200
+#define	HD64461_STBCR_SMIAST		0x0100
+#define	HD64461_STBCR_SLCDST		0x0080
+#define	HD64461_STBCR_SPC0ST		0x0040
+#define	HD64461_STBCR_SPC1ST		0x0020
+#define	HD64461_STBCR_SAFEST		0x0010
+#define	HD64461_STBCR_STM0ST		0x0008
+#define	HD64461_STBCR_STM1ST		0x0004
+#define	HD64461_STBCR_SIRST		0x0002
+#define	HD64461_STBCR_SURTST		0x0001
+
+/* System Configuration Register */
+#define	HD64461_SYSCR		(CONFIG_HD64461_IOBASE + 0x02)
+
+/* CPU Data Bus Control Register */
+#define	HD64461_SCPUCR		(CONFIG_HD64461_IOBASE + 0x04)
+
+/* Base Address Register */
+#define	HD64461_LCDCBAR		(CONFIG_HD64461_IOBASE + 0x1000)
+
+/* Line increment address */
+#define	HD64461_LCDCLOR		(CONFIG_HD64461_IOBASE + 0x1002)
+
+/* Controls LCD controller */
+#define	HD64461_LCDCCR		(CONFIG_HD64461_IOBASE + 0x1004)
+
+/* LCCDR control bits */
+#define	HD64461_LCDCCR_STBACK	0x0400	/* Standby Back */
+#define	HD64461_LCDCCR_STREQ	0x0100	/* Standby Request */
+#define	HD64461_LCDCCR_MOFF	0x0080	/* Memory Off */
+#define	HD64461_LCDCCR_REFSEL	0x0040	/* Refresh Select */
+#define	HD64461_LCDCCR_EPON	0x0020	/* End Power On */
+#define	HD64461_LCDCCR_SPON	0x0010	/* Start Power On */
+
+/* Controls LCD (1) */
+#define	HD64461_LDR1		(CONFIG_HD64461_IOBASE + 0x1010)
+#define	HD64461_LDR1_DON	0x01	/* Display On */
+#define	HD64461_LDR1_DINV	0x80	/* Display Invert */
+
+/* Controls LCD (2) */
+#define	HD64461_LDR2		(CONFIG_HD64461_IOBASE + 0x1012)
+#define	HD64461_LDHNCR		(CONFIG_HD64461_IOBASE + 0x1014)	/* Number of horizontal characters */
+#define	HD64461_LDHNSR		(CONFIG_HD64461_IOBASE + 0x1016)	/* Specify output start position + width of CL1 */
+#define	HD64461_LDVNTR		(CONFIG_HD64461_IOBASE + 0x1018)	/* Specify total vertical lines */
+#define	HD64461_LDVNDR		(CONFIG_HD64461_IOBASE + 0x101a)	/* specify number of display vertical lines */
+#define	HD64461_LDVSPR		(CONFIG_HD64461_IOBASE + 0x101c)	/* specify vertical synchronization pos and AC nr */
+
+/* Controls LCD (3) */
+#define	HD64461_LDR3		(CONFIG_HD64461_IOBASE + 0x101e)
+
+/* Palette Registers */
+#define	HD64461_CPTWAR		(CONFIG_HD64461_IOBASE + 0x1030)	/* Color Palette Write Address Register */
+#define	HD64461_CPTWDR		(CONFIG_HD64461_IOBASE + 0x1032)	/* Color Palette Write Data Register */
+#define	HD64461_CPTRAR		(CONFIG_HD64461_IOBASE + 0x1034)	/* Color Palette Read Address Register */
+#define	HD64461_CPTRDR		(CONFIG_HD64461_IOBASE + 0x1036)	/* Color Palette Read Data Register */
+
+#define	HD64461_GRDOR		(CONFIG_HD64461_IOBASE + 0x1040)	/* Display Resolution Offset Register */
+#define	HD64461_GRSCR		(CONFIG_HD64461_IOBASE + 0x1042)	/* Solid Color Register */
+#define	HD64461_GRCFGR		(CONFIG_HD64461_IOBASE + 0x1044)	/* Accelerator Configuration Register */
+
+#define	HD64461_GRCFGR_ACCSTATUS	0x10	/* Accelerator Status */
+#define	HD64461_GRCFGR_ACCRESET		0x08	/* Accelerator Reset */
+#define	HD64461_GRCFGR_ACCSTART_BITBLT	0x06	/* Accelerator Start BITBLT */
+#define	HD64461_GRCFGR_ACCSTART_LINE	0x04	/* Accelerator Start Line Drawing */
+#define	HD64461_GRCFGR_COLORDEPTH16	0x01	/* Sets Colordepth 16 for Accelerator */
+#define	HD64461_GRCFGR_COLORDEPTH8	0x01	/* Sets Colordepth 8 for Accelerator */
+
+/* Line Drawing Registers */
+#define	HD64461_LNSARH		(CONFIG_HD64461_IOBASE + 0x1046)	/* Line Start Address Register (H) */
+#define	HD64461_LNSARL		(CONFIG_HD64461_IOBASE + 0x1048)	/* Line Start Address Register (L) */
+#define	HD64461_LNAXLR		(CONFIG_HD64461_IOBASE + 0x104a)	/* Axis Pixel Length Register */
+#define	HD64461_LNDGR		(CONFIG_HD64461_IOBASE + 0x104c)	/* Diagonal Register */
+#define	HD64461_LNAXR		(CONFIG_HD64461_IOBASE + 0x104e)	/* Axial Register */
+#define	HD64461_LNERTR		(CONFIG_HD64461_IOBASE + 0x1050)	/* Start Error Term Register */
+#define	HD64461_LNMDR		(CONFIG_HD64461_IOBASE + 0x1052)	/* Line Mode Register */
+
+/* BitBLT Registers */
+#define	HD64461_BBTSSARH	(CONFIG_HD64461_IOBASE + 0x1054)	/* Source Start Address Register (H) */
+#define	HD64461_BBTSSARL	(CONFIG_HD64461_IOBASE + 0x1056)	/* Source Start Address Register (L) */
+#define	HD64461_BBTDSARH	(CONFIG_HD64461_IOBASE + 0x1058)	/* Destination Start Address Register (H) */
+#define	HD64461_BBTDSARL	(CONFIG_HD64461_IOBASE + 0x105a)	/* Destination Start Address Register (L) */
+#define	HD64461_BBTDWR		(CONFIG_HD64461_IOBASE + 0x105c)	/* Destination Block Width Register */
+#define	HD64461_BBTDHR		(CONFIG_HD64461_IOBASE + 0x105e)	/* Destination Block Height Register */
+#define	HD64461_BBTPARH		(CONFIG_HD64461_IOBASE + 0x1060)	/* Pattern Start Address Register (H) */
+#define	HD64461_BBTPARL		(CONFIG_HD64461_IOBASE + 0x1062)	/* Pattern Start Address Register (L) */
+#define	HD64461_BBTMARH		(CONFIG_HD64461_IOBASE + 0x1064)	/* Mask Start Address Register (H) */
+#define	HD64461_BBTMARL		(CONFIG_HD64461_IOBASE + 0x1066)	/* Mask Start Address Register (L) */
+#define	HD64461_BBTROPR		(CONFIG_HD64461_IOBASE + 0x1068)	/* ROP Register */
+#define	HD64461_BBTMDR		(CONFIG_HD64461_IOBASE + 0x106a)	/* BitBLT Mode Register */
+
+/* PC Card Controller Registers */
+/* Maps to Physical Area 6 */
+#define	HD64461_PCC0ISR		(CONFIG_HD64461_IOBASE + 0x2000)	/* socket 0 interface status */
+#define	HD64461_PCC0GCR		(CONFIG_HD64461_IOBASE + 0x2002)	/* socket 0 general control */
+#define	HD64461_PCC0CSCR	(CONFIG_HD64461_IOBASE + 0x2004)	/* socket 0 card status change */
+#define	HD64461_PCC0CSCIER	(CONFIG_HD64461_IOBASE + 0x2006)	/* socket 0 card status change interrupt enable */
+#define	HD64461_PCC0SCR		(CONFIG_HD64461_IOBASE + 0x2008)	/* socket 0 software control */
+/* Maps to Physical Area 5 */
+#define	HD64461_PCC1ISR		(CONFIG_HD64461_IOBASE + 0x2010)	/* socket 1 interface status */
+#define	HD64461_PCC1GCR		(CONFIG_HD64461_IOBASE + 0x2012)	/* socket 1 general control */
+#define	HD64461_PCC1CSCR	(CONFIG_HD64461_IOBASE + 0x2014)	/* socket 1 card status change */
+#define	HD64461_PCC1CSCIER	(CONFIG_HD64461_IOBASE + 0x2016)	/* socket 1 card status change interrupt enable */
+#define	HD64461_PCC1SCR		(CONFIG_HD64461_IOBASE + 0x2018)	/* socket 1 software control */
+
+/* PCC Interface Status Register */
+#define	HD64461_PCCISR_READY		0x80	/* card ready */
+#define	HD64461_PCCISR_MWP		0x40	/* card write-protected */
+#define	HD64461_PCCISR_VS2		0x20	/* voltage select pin 2 */
+#define	HD64461_PCCISR_VS1		0x10	/* voltage select pin 1 */
+#define	HD64461_PCCISR_CD2		0x08	/* card detect 2 */
+#define	HD64461_PCCISR_CD1		0x04	/* card detect 1 */
+#define	HD64461_PCCISR_BVD2		0x02	/* battery 1 */
+#define	HD64461_PCCISR_BVD1		0x01	/* battery 1 */
+
+#define	HD64461_PCCISR_PCD_MASK		0x0c	/* card detect */
+#define	HD64461_PCCISR_BVD_MASK		0x03	/* battery voltage */
+#define	HD64461_PCCISR_BVD_BATGOOD	0x03	/* battery good */
+#define	HD64461_PCCISR_BVD_BATWARN	0x01	/* battery low warning */
+#define	HD64461_PCCISR_BVD_BATDEAD1	0x02	/* battery dead */
+#define	HD64461_PCCISR_BVD_BATDEAD2	0x00	/* battery dead */
+
+/* PCC General Control Register */
+#define	HD64461_PCCGCR_DRVE		0x80	/* output drive */
+#define	HD64461_PCCGCR_PCCR		0x40	/* PC card reset */
+#define	HD64461_PCCGCR_PCCT		0x20	/* PC card type, 1=IO&mem, 0=mem */
+#define	HD64461_PCCGCR_VCC0		0x10	/* voltage control pin VCC0SEL0 */
+#define	HD64461_PCCGCR_PMMOD		0x08	/* memory mode */
+#define	HD64461_PCCGCR_PA25		0x04	/* pin A25 */
+#define	HD64461_PCCGCR_PA24		0x02	/* pin A24 */
+#define	HD64461_PCCGCR_REG		0x01	/* pin PCC0REG# */
+
+/* PCC Card Status Change Register */
+#define	HD64461_PCCCSCR_SCDI		0x80	/* sw card detect intr */
+#define	HD64461_PCCCSCR_SRV1		0x40	/* reserved */
+#define	HD64461_PCCCSCR_IREQ		0x20	/* IREQ intr req */
+#define	HD64461_PCCCSCR_SC		0x10	/* STSCHG (status change) pin */
+#define	HD64461_PCCCSCR_CDC		0x08	/* CD (card detect) change */
+#define	HD64461_PCCCSCR_RC		0x04	/* READY change */
+#define	HD64461_PCCCSCR_BW		0x02	/* battery warning change */
+#define	HD64461_PCCCSCR_BD		0x01	/* battery dead change */
+
+/* PCC Card Status Change Interrupt Enable Register */
+#define	HD64461_PCCCSCIER_CRE		0x80	/* change reset enable */
+#define	HD64461_PCCCSCIER_IREQE_MASK	0x60	/* IREQ enable */
+#define	HD64461_PCCCSCIER_IREQE_DISABLED 0x00	/* IREQ disabled */
+#define	HD64461_PCCCSCIER_IREQE_LEVEL	0x20	/* IREQ level-triggered */
+#define	HD64461_PCCCSCIER_IREQE_FALLING	0x40	/* IREQ falling-edge-trig */
+#define	HD64461_PCCCSCIER_IREQE_RISING	0x60	/* IREQ rising-edge-trig */
+
+#define	HD64461_PCCCSCIER_SCE		0x10	/* status change enable */
+#define	HD64461_PCCCSCIER_CDE		0x08	/* card detect change enable */
+#define	HD64461_PCCCSCIER_RE		0x04	/* ready change enable */
+#define	HD64461_PCCCSCIER_BWE		0x02	/* battery warn change enable */
+#define	HD64461_PCCCSCIER_BDE		0x01	/* battery dead change enable*/
+
+/* PCC Software Control Register */
+#define	HD64461_PCCSCR_VCC1		0x02	/* voltage control pin 1 */
+#define	HD64461_PCCSCR_SWP		0x01	/* write protect */
+
+/* PCC0 Output Pins Control Register */
+#define	HD64461_P0OCR		(CONFIG_HD64461_IOBASE + 0x202a)
+
+/* PCC1 Output Pins Control Register */
+#define	HD64461_P1OCR		(CONFIG_HD64461_IOBASE + 0x202c)
+
+/* PC Card General Control Register */
+#define	HD64461_PGCR		(CONFIG_HD64461_IOBASE + 0x202e)
+
+/* Port Control Registers */
+#define	HD64461_GPACR		(CONFIG_HD64461_IOBASE + 0x4000)	/* Port A - Handles IRDA/TIMER */
+#define	HD64461_GPBCR		(CONFIG_HD64461_IOBASE + 0x4002)	/* Port B - Handles UART */
+#define	HD64461_GPCCR		(CONFIG_HD64461_IOBASE + 0x4004)	/* Port C - Handles PCMCIA 1 */
+#define	HD64461_GPDCR		(CONFIG_HD64461_IOBASE + 0x4006)	/* Port D - Handles PCMCIA 1 */
+
+/* Port Control Data Registers */
+#define	HD64461_GPADR		(CONFIG_HD64461_IOBASE + 0x4010)	/* A */
+#define	HD64461_GPBDR		(CONFIG_HD64461_IOBASE + 0x4012)	/* B */
+#define	HD64461_GPCDR		(CONFIG_HD64461_IOBASE + 0x4014)	/* C */
+#define	HD64461_GPDDR		(CONFIG_HD64461_IOBASE + 0x4016)	/* D */
+
+/* Interrupt Control Registers */
+#define	HD64461_GPAICR		(CONFIG_HD64461_IOBASE + 0x4020)	/* A */
+#define	HD64461_GPBICR		(CONFIG_HD64461_IOBASE + 0x4022)	/* B */
+#define	HD64461_GPCICR		(CONFIG_HD64461_IOBASE + 0x4024)	/* C */
+#define	HD64461_GPDICR		(CONFIG_HD64461_IOBASE + 0x4026)	/* D */
+
+/* Interrupt Status Registers */
+#define	HD64461_GPAISR		(CONFIG_HD64461_IOBASE + 0x4040)	/* A */
+#define	HD64461_GPBISR		(CONFIG_HD64461_IOBASE + 0x4042)	/* B */
+#define	HD64461_GPCISR		(CONFIG_HD64461_IOBASE + 0x4044)	/* C */
+#define	HD64461_GPDISR		(CONFIG_HD64461_IOBASE + 0x4046)	/* D */
+
+/* Interrupt Request Register & Interrupt Mask Register */
+#define	HD64461_NIRR		(CONFIG_HD64461_IOBASE + 0x5000)
+#define	HD64461_NIMR		(CONFIG_HD64461_IOBASE + 0x5002)
+
+#define	HD64461_IRQBASE		OFFCHIP_IRQ_BASE
+#define	OFFCHIP_IRQ_BASE	64
+#define	HD64461_IRQ_NUM		16
+
+#define	HD64461_IRQ_UART	(HD64461_IRQBASE+5)
+#define	HD64461_IRQ_IRDA	(HD64461_IRQBASE+6)
+#define	HD64461_IRQ_TMU1	(HD64461_IRQBASE+9)
+#define	HD64461_IRQ_TMU0	(HD64461_IRQBASE+10)
+#define	HD64461_IRQ_GPIO	(HD64461_IRQBASE+11)
+#define	HD64461_IRQ_AFE		(HD64461_IRQBASE+12)
+#define	HD64461_IRQ_PCC1	(HD64461_IRQBASE+13)
+#define	HD64461_IRQ_PCC0	(HD64461_IRQBASE+14)
+
+#define __IO_PREFIX	hd64461
+#include <asm/io_generic.h>
+
+/* arch/sh/cchips/hd6446x/hd64461/setup.c */
+int hd64461_irq_demux(int irq);
+void hd64461_register_irq_demux(int irq,
+				int (*demux) (int irq, void *dev), void *dev);
+void hd64461_unregister_irq_demux(int irq);
+
+#endif
diff --git a/arch/sh/include/asm/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h
new file mode 100644
index 00000000000..a3cdca2713d
--- /dev/null
+++ b/arch/sh/include/asm/hd64465/gpio.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_SH_HD64465_GPIO_
+#define _ASM_SH_HD64465_GPIO_ 1
+/*
+ * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
+ *
+ * Hitachi HD64465 companion chip: General Purpose IO pins support.
+ * This layer enables other device drivers to configure GPIO
+ * pins, get and set their values, and register an interrupt
+ * routine for when input pins change in hardware.
+ *
+ * by Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ */
+#include <asm/hd64465.h>
+
+/* Macro to construct a portpin number (used in all
+ * subsequent functions) from a port letter and a pin
+ * number, e.g. HD64465_GPIO_PORTPIN('A', 5).
+ */
+#define HD64465_GPIO_PORTPIN(port,pin)	(((port)-'A')<<3|(pin))
+
+/* Pin configuration constants for _configure() */
+#define HD64465_GPIO_FUNCTION2	0	/* use the pin's *other* function */
+#define HD64465_GPIO_OUT	1	/* output */
+#define HD64465_GPIO_IN_PULLUP	2	/* input, pull-up MOS on */
+#define HD64465_GPIO_IN		3	/* input */
+
+/* Configure a pin's direction */
+extern void hd64465_gpio_configure(int portpin, int direction);
+
+/* Get, set value */
+extern void hd64465_gpio_set_pin(int portpin, unsigned int value);
+extern unsigned int hd64465_gpio_get_pin(int portpin);
+extern void hd64465_gpio_set_port(int port, unsigned int value);
+extern unsigned int hd64465_gpio_get_port(int port);
+
+/* mode constants for _register_irq() */
+#define HD64465_GPIO_FALLING	0
+#define HD64465_GPIO_RISING	1
+
+/* Interrupt on external value change */
+extern void hd64465_gpio_register_irq(int portpin, int mode,
+	void (*handler)(int portpin, void *dev), void *dev);
+extern void hd64465_gpio_unregister_irq(int portpin);
+
+#endif /* _ASM_SH_HD64465_GPIO_  */
diff --git a/arch/sh/include/asm/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h
new file mode 100644
index 00000000000..cfd0e803d2a
--- /dev/null
+++ b/arch/sh/include/asm/hd64465/hd64465.h
@@ -0,0 +1,256 @@
+#ifndef _ASM_SH_HD64465_
+#define _ASM_SH_HD64465_ 1
+/*
+ * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
+ *
+ * Hitachi HD64465 companion chip support
+ *
+ * by Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ *
+ * Derived from <asm/hd64461.h> which bore the message:
+ * Copyright (C) 2000 YAEGASHI Takeshi
+ */
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * Note that registers are defined here as virtual port numbers,
+ * which have no meaning except to get translated by hd64465_isa_port2addr()
+ * to an address in the range 0xb0000000-0xb3ffffff.  Note that
+ * this translation happens to consist of adding the lower 16 bits
+ * of the virtual port number to 0xb0000000.  Note also that the manual
+ * shows addresses as absolute physical addresses starting at 0x10000000,
+ * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
+ * manual, and accessed using address 0xb0005000 - Greg.
+ */
+
+/* System registers */
+#define HD64465_REG_SRR     0x1000c 	/* System Revision Register */
+#define HD64465_REG_SDID    0x10010 	/* System Device ID Reg */
+#define     HD64465_SDID            0x8122  /* 64465 device ID */
+
+/* Power Management registers */
+#define HD64465_REG_SMSCR   0x10000 	/* System Module Standby Control Reg */
+#define	    HD64465_SMSCR_PS2ST     0x4000  /* PS/2 Standby */
+#define	    HD64465_SMSCR_ADCST     0x1000  /* ADC Standby */
+#define	    HD64465_SMSCR_UARTST    0x0800  /* UART Standby */
+#define	    HD64465_SMSCR_SCDIST    0x0200  /* Serial Codec Standby */
+#define	    HD64465_SMSCR_PPST	    0x0100  /* Parallel Port Standby */
+#define	    HD64465_SMSCR_PC0ST     0x0040  /* PCMCIA0 Standby */
+#define	    HD64465_SMSCR_PC1ST     0x0020  /* PCMCIA1 Standby */
+#define	    HD64465_SMSCR_AFEST     0x0010  /* AFE Standby */
+#define	    HD64465_SMSCR_TM0ST     0x0008  /* Timer0 Standby */
+#define	    HD64465_SMSCR_TM1ST     0x0004  /* Timer1 Standby */
+#define	    HD64465_SMSCR_IRDAST    0x0002  /* IRDA Standby */
+#define	    HD64465_SMSCR_KBCST     0x0001  /* Keyboard Controller Standby */
+ 
+/* Interrupt Controller registers */
+#define HD64465_REG_NIRR    0x15000  	/* Interrupt Request Register */
+#define HD64465_REG_NIMR    0x15002  	/* Interrupt Mask Register */
+#define HD64465_REG_NITR    0x15004  	/* Interrupt Trigger Mode Register */
+
+/* Timer registers */
+#define HD64465_REG_TCVR1   0x16000  	/* Timer 1 constant value register  */
+#define HD64465_REG_TCVR0   0x16002	/* Timer 0 constant value register  */
+#define HD64465_REG_TRVR1   0x16004	/* Timer 1 read value register  */
+#define HD64465_REG_TRVR0   0x16006	/* Timer 0 read value register  */
+#define HD64465_REG_TCR1    0x16008	/* Timer 1 control register  */
+#define HD64465_REG_TCR0    0x1600A	/* Timer 0 control register  */
+#define	    HD64465_TCR_EADT 	0x10	    /* Enable ADTRIG# signal */
+#define	    HD64465_TCR_ETMO 	0x08	    /* Enable TMO signal */
+#define	    HD64465_TCR_PST_MASK 0x06	    /* Clock Prescale */
+#define	    HD64465_TCR_PST_1 	0x06	    /* 1:1 */
+#define	    HD64465_TCR_PST_4 	0x04	    /* 1:4 */
+#define	    HD64465_TCR_PST_8 	0x02	    /* 1:8 */
+#define	    HD64465_TCR_PST_16 	0x00	    /* 1:16 */
+#define	    HD64465_TCR_TSTP 	0x01	    /* Start/Stop timer */
+#define HD64465_REG_TIRR    0x1600C	/* Timer interrupt request register  */
+#define HD64465_REG_TIDR    0x1600E	/* Timer interrupt disable register  */
+#define HD64465_REG_PWM1CS  0x16010	/* PWM 1 clock scale register  */
+#define HD64465_REG_PWM1LPC 0x16012	/* PWM 1 low pulse width counter register  */
+#define HD64465_REG_PWM1HPC 0x16014	/* PWM 1 high pulse width counter register  */
+#define HD64465_REG_PWM0CS  0x16018	/* PWM 0 clock scale register  */
+#define HD64465_REG_PWM0LPC 0x1601A	/* PWM 0 low pulse width counter register  */
+#define HD64465_REG_PWM0HPC 0x1601C	/* PWM 0 high pulse width counter register  */
+
+/* Analog/Digital Converter registers */
+#define HD64465_REG_ADDRA   0x1E000	/* A/D data register A */
+#define HD64465_REG_ADDRB   0x1E002	/* A/D data register B */
+#define HD64465_REG_ADDRC   0x1E004	/* A/D data register C */
+#define HD64465_REG_ADDRD   0x1E006	/* A/D data register D */
+#define HD64465_REG_ADCSR   0x1E008	/* A/D control/status register */
+#define     HD64465_ADCSR_ADF	    0x80    /* A/D End Flag */
+#define     HD64465_ADCSR_ADST	    0x40    /* A/D Start Flag */
+#define     HD64465_ADCSR_ADIS	    0x20    /* A/D Interrupt Status */
+#define     HD64465_ADCSR_TRGE	    0x10    /* A/D Trigger Enable */
+#define     HD64465_ADCSR_ADIE	    0x08    /* A/D Interrupt Enable */
+#define     HD64465_ADCSR_SCAN	    0x04    /* A/D Scan Mode */
+#define     HD64465_ADCSR_CH_MASK   0x03    /* A/D Channel */
+#define HD64465_REG_ADCALCR 0x1E00A  	/* A/D calibration sample control */
+#define HD64465_REG_ADCAL   0x1E00C  	/* A/D calibration data register */
+
+
+/* General Purpose I/O ports registers */
+#define HD64465_REG_GPACR   0x14000  	/* Port A Control Register */
+#define HD64465_REG_GPBCR   0x14002  	/* Port B Control Register */
+#define HD64465_REG_GPCCR   0x14004  	/* Port C Control Register */
+#define HD64465_REG_GPDCR   0x14006  	/* Port D Control Register */
+#define HD64465_REG_GPECR   0x14008  	/* Port E Control Register */
+#define HD64465_REG_GPADR   0x14010  	/* Port A Data Register */
+#define HD64465_REG_GPBDR   0x14012  	/* Port B Data Register */
+#define HD64465_REG_GPCDR   0x14014  	/* Port C Data Register */
+#define HD64465_REG_GPDDR   0x14016  	/* Port D Data Register */
+#define HD64465_REG_GPEDR   0x14018  	/* Port E Data Register */
+#define HD64465_REG_GPAICR  0x14020  	/* Port A Interrupt Control Register */
+#define HD64465_REG_GPBICR  0x14022  	/* Port B Interrupt Control Register */
+#define HD64465_REG_GPCICR  0x14024  	/* Port C Interrupt Control Register */
+#define HD64465_REG_GPDICR  0x14026  	/* Port D Interrupt Control Register */
+#define HD64465_REG_GPEICR  0x14028  	/* Port E Interrupt Control Register */
+#define HD64465_REG_GPAISR  0x14040  	/* Port A Interrupt Status Register */
+#define HD64465_REG_GPBISR  0x14042  	/* Port B Interrupt Status Register */
+#define HD64465_REG_GPCISR  0x14044  	/* Port C Interrupt Status Register */
+#define HD64465_REG_GPDISR  0x14046  	/* Port D Interrupt Status Register */
+#define HD64465_REG_GPEISR  0x14048  	/* Port E Interrupt Status Register */
+
+/* PCMCIA bridge interface */
+#define HD64465_REG_PCC0ISR	0x12000	/* socket 0 interface status */ 
+#define     HD64465_PCCISR_PREADY   	 0x80    /* mem card ready / io card IREQ */
+#define     HD64465_PCCISR_PIREQ    	 0x80
+#define     HD64465_PCCISR_PMWP     	 0x40    /* mem card write-protected */
+#define     HD64465_PCCISR_PVS2 	 0x20    /* voltage select pin 2 */
+#define     HD64465_PCCISR_PVS1 	 0x10    /* voltage select pin 1 */
+#define     HD64465_PCCISR_PCD_MASK 	 0x0c    /* card detect */
+#define     HD64465_PCCISR_PBVD_MASK     0x03    /* battery voltage */
+#define     HD64465_PCCISR_PBVD_BATGOOD  0x03    /* battery good */
+#define     HD64465_PCCISR_PBVD_BATWARN  0x01    /* battery low warning */
+#define     HD64465_PCCISR_PBVD_BATDEAD1 0x02    /* battery dead */
+#define     HD64465_PCCISR_PBVD_BATDEAD2 0x00    /* battery dead */
+#define HD64465_REG_PCC0GCR	0x12002	/* socket 0 general control */ 
+#define     HD64465_PCCGCR_PDRV   	 0x80    /* output drive */
+#define     HD64465_PCCGCR_PCCR   	 0x40    /* PC card reset */
+#define     HD64465_PCCGCR_PCCT   	 0x20    /* PC card type, 1=IO&mem, 0=mem */
+#define     HD64465_PCCGCR_PVCC0   	 0x10    /* voltage control pin VCC0SEL0 */
+#define     HD64465_PCCGCR_PMMOD   	 0x08    /* memory mode */
+#define     HD64465_PCCGCR_PPA25   	 0x04    /* pin A25 */
+#define     HD64465_PCCGCR_PPA24   	 0x02    /* pin A24 */
+#define     HD64465_PCCGCR_PREG   	 0x01    /* ping PCC0REG# */
+#define HD64465_REG_PCC0CSCR	0x12004	/* socket 0 card status change */ 
+#define     HD64465_PCCCSCR_PSCDI   	 0x80    /* sw card detect intr */
+#define     HD64465_PCCCSCR_PSWSEL   	 0x40    /* power select */
+#define     HD64465_PCCCSCR_PIREQ   	 0x20    /* IREQ intr req */
+#define     HD64465_PCCCSCR_PSC   	 0x10    /* STSCHG (status change) pin */
+#define     HD64465_PCCCSCR_PCDC   	 0x08    /* CD (card detect) change */
+#define     HD64465_PCCCSCR_PRC   	 0x04    /* ready change */
+#define     HD64465_PCCCSCR_PBW   	 0x02    /* battery warning change */
+#define     HD64465_PCCCSCR_PBD   	 0x01    /* battery dead change */
+#define HD64465_REG_PCC0CSCIER	0x12006	/* socket 0 card status change interrupt enable */ 
+#define     HD64465_PCCCSCIER_PCRE   	 0x80    /* change reset enable */
+#define     HD64465_PCCCSCIER_PIREQE_MASK   	0x60   /* IREQ enable */
+#define     HD64465_PCCCSCIER_PIREQE_DISABLED	0x00   /* IREQ disabled */
+#define     HD64465_PCCCSCIER_PIREQE_LEVEL  	0x20   /* IREQ level-triggered */
+#define     HD64465_PCCCSCIER_PIREQE_FALLING	0x40   /* IREQ falling-edge-trig */
+#define     HD64465_PCCCSCIER_PIREQE_RISING 	0x60   /* IREQ rising-edge-trig */
+#define     HD64465_PCCCSCIER_PSCE   	 0x10    /* status change enable */
+#define     HD64465_PCCCSCIER_PCDE   	 0x08    /* card detect change enable */
+#define     HD64465_PCCCSCIER_PRE   	 0x04    /* ready change enable */
+#define     HD64465_PCCCSCIER_PBWE   	 0x02    /* battery warn change enable */
+#define     HD64465_PCCCSCIER_PBDE   	 0x01    /* battery dead change enable*/
+#define HD64465_REG_PCC0SCR	0x12008	/* socket 0 software control */ 
+#define     HD64465_PCCSCR_SHDN   	 0x10    /* TPS2206 SHutDowN pin */
+#define     HD64465_PCCSCR_SWP   	 0x01    /* write protect */
+#define HD64465_REG_PCCPSR	0x1200A	/* serial power switch control */ 
+#define HD64465_REG_PCC1ISR	0x12010	/* socket 1 interface status */ 
+#define HD64465_REG_PCC1GCR	0x12012	/* socket 1 general control */ 
+#define HD64465_REG_PCC1CSCR	0x12014	/* socket 1 card status change */ 
+#define HD64465_REG_PCC1CSCIER	0x12016	/* socket 1 card status change interrupt enable */ 
+#define HD64465_REG_PCC1SCR	0x12018	/* socket 1 software control */ 
+
+
+/* PS/2 Keyboard and mouse controller -- *not* register compatible */
+#define HD64465_REG_KBCSR   	0x1dc00 /* Keyboard Control/Status reg */
+#define     HD64465_KBCSR_KBCIE   	 0x8000    /* KBCK Input Enable */
+#define     HD64465_KBCSR_KBCOE   	 0x4000    /* KBCK Output Enable */
+#define     HD64465_KBCSR_KBDOE   	 0x2000    /* KB DATA Output Enable */
+#define     HD64465_KBCSR_KBCD   	 0x1000    /* KBCK Driven */
+#define     HD64465_KBCSR_KBDD   	 0x0800    /* KB DATA Driven */
+#define     HD64465_KBCSR_KBCS   	 0x0400    /* KBCK pin Status */
+#define     HD64465_KBCSR_KBDS   	 0x0200    /* KB DATA pin Status */
+#define     HD64465_KBCSR_KBDP   	 0x0100    /* KB DATA Parity bit */
+#define     HD64465_KBCSR_KBD_MASK   	 0x00ff    /* KD DATA shift reg */
+#define HD64465_REG_KBISR   	0x1dc04 /* Keyboard Interrupt Status reg */
+#define     HD64465_KBISR_KBRDF   	 0x0001    /* KB Received Data Full */
+#define HD64465_REG_MSCSR   	0x1dc10 /* Mouse Control/Status reg */
+#define HD64465_REG_MSISR   	0x1dc14 /* Mouse Interrupt Status reg */
+
+
+/*
+ * Logical address at which the HD64465 is mapped.  Note that this
+ * should always be in the P2 segment (uncached and untranslated).
+ */
+#ifndef CONFIG_HD64465_IOBASE
+#define CONFIG_HD64465_IOBASE	0xb0000000
+#endif
+/*
+ * The HD64465 multiplexes all its modules' interrupts onto
+ * this single interrupt.
+ */
+#ifndef CONFIG_HD64465_IRQ
+#define CONFIG_HD64465_IRQ	5
+#endif
+
+
+#define _HD64465_IO_MASK	0xf8000000
+#define is_hd64465_addr(addr) \
+	((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))
+
+/*
+ * A range of 16 virtual interrupts generated by
+ * demuxing the HD64465 muxed interrupt.
+ */
+#define HD64465_IRQ_BASE	OFFCHIP_IRQ_BASE
+#define HD64465_IRQ_NUM 	16
+#define HD64465_IRQ_ADC     	(HD64465_IRQ_BASE+0)
+#define HD64465_IRQ_USB     	(HD64465_IRQ_BASE+1)
+#define HD64465_IRQ_SCDI    	(HD64465_IRQ_BASE+2)
+#define HD64465_IRQ_PARALLEL	(HD64465_IRQ_BASE+3)
+/* bit 4 is reserved */
+#define HD64465_IRQ_UART    	(HD64465_IRQ_BASE+5)
+#define HD64465_IRQ_IRDA    	(HD64465_IRQ_BASE+6)
+#define HD64465_IRQ_PS2MOUSE	(HD64465_IRQ_BASE+7)
+#define HD64465_IRQ_KBC     	(HD64465_IRQ_BASE+8)
+#define HD64465_IRQ_TIMER1   	(HD64465_IRQ_BASE+9)
+#define HD64465_IRQ_TIMER0  	(HD64465_IRQ_BASE+10)
+#define HD64465_IRQ_GPIO    	(HD64465_IRQ_BASE+11)
+#define HD64465_IRQ_AFE     	(HD64465_IRQ_BASE+12)
+#define HD64465_IRQ_PCMCIA1 	(HD64465_IRQ_BASE+13)
+#define HD64465_IRQ_PCMCIA0 	(HD64465_IRQ_BASE+14)
+#define HD64465_IRQ_PS2KBD     	(HD64465_IRQ_BASE+15)
+
+/* Constants for PCMCIA mappings */
+#define HD64465_PCC_WINDOW	0x01000000
+
+#define HD64465_PCC0_BASE	0xb8000000	/* area 6 */
+#define HD64465_PCC0_ATTR	(HD64465_PCC0_BASE)
+#define HD64465_PCC0_COMM	(HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
+#define HD64465_PCC0_IO		(HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)
+
+#define HD64465_PCC1_BASE	0xb4000000	/* area 5 */
+#define HD64465_PCC1_ATTR	(HD64465_PCC1_BASE)
+#define HD64465_PCC1_COMM	(HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
+#define HD64465_PCC1_IO		(HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)
+
+/*
+ * Base of USB controller interface (as memory)
+ */
+#define HD64465_USB_BASE    	(CONFIG_HD64465_IOBASE+0xb000)
+#define HD64465_USB_LEN    	0x1000
+/*
+ * Base of embedded SRAM, used for USB controller.
+ */
+#define HD64465_SRAM_BASE    	(CONFIG_HD64465_IOBASE+0x9000)
+#define HD64465_SRAM_LEN    	0x1000
+
+
+
+#endif /* _ASM_SH_HD64465_  */
diff --git a/arch/sh/include/asm/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h
new file mode 100644
index 00000000000..139f1472e5b
--- /dev/null
+++ b/arch/sh/include/asm/hd64465/io.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/hd64465/io.h
+ *
+ * By Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ *
+ * Derived from io_hd64461.h, which bore the message:
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller".
+ */
+
+#ifndef _ASM_SH_IO_HD64465_H
+#define _ASM_SH_IO_HD64465_H
+
+extern unsigned char hd64465_inb(unsigned long port);
+extern unsigned short hd64465_inw(unsigned long port);
+extern unsigned int hd64465_inl(unsigned long port);
+
+extern void hd64465_outb(unsigned char value, unsigned long port);
+extern void hd64465_outw(unsigned short value, unsigned long port);
+extern void hd64465_outl(unsigned int value, unsigned long port);
+
+extern unsigned char hd64465_inb_p(unsigned long port);
+extern void hd64465_outb_p(unsigned char value, unsigned long port);
+
+extern unsigned long hd64465_isa_port2addr(unsigned long offset);
+extern int hd64465_irq_demux(int irq);
+/* Provision for generic secondary demux step -- used by PCMCIA code */
+extern void hd64465_register_irq_demux(int irq,
+		int (*demux)(int irq, void *dev), void *dev);
+extern void hd64465_unregister_irq_demux(int irq);
+/* Set this variable to 1 to see port traffic */
+extern int hd64465_io_debug;
+/* Map a range of ports to a range of kernel virtual memory.
+ */
+extern void hd64465_port_map(unsigned short baseport, unsigned int nports,
+			     unsigned long addr, unsigned char shift);
+extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports);
+
+#endif /* _ASM_SH_IO_HD64465_H */
diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h
new file mode 100644
index 00000000000..724a43ed245
--- /dev/null
+++ b/arch/sh/include/asm/heartbeat.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_HEARTBEAT_H
+#define __ASM_SH_HEARTBEAT_H
+
+#include <linux/timer.h>
+
+#define HEARTBEAT_INVERTED	(1 << 0)
+
+struct heartbeat_data {
+	void __iomem *base;
+	unsigned char *bit_pos;
+	unsigned int nr_bits;
+	struct timer_list timer;
+	unsigned int regsize;
+	unsigned long flags;
+};
+
+#endif /* __ASM_SH_HEARTBEAT_H */
diff --git a/arch/sh/include/asm/hp6xx.h b/arch/sh/include/asm/hp6xx.h
new file mode 100644
index 00000000000..0d4165a32dc
--- /dev/null
+++ b/arch/sh/include/asm/hp6xx.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_SH_HP6XX_H
+#define __ASM_SH_HP6XX_H
+
+/*
+ * Copyright (C) 2003, 2004, 2005  Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#define HP680_BTN_IRQ		32	/* IRQ0_IRQ */
+#define HP680_TS_IRQ		35	/* IRQ3_IRQ */
+#define HP680_HD64461_IRQ	36	/* IRQ4_IRQ */
+
+#define DAC_LCD_BRIGHTNESS	0
+#define DAC_SPEAKER_VOLUME	1
+
+#define PGDR_OPENED		0x01
+#define PGDR_MAIN_BATTERY_OUT	0x04
+#define PGDR_PLAY_BUTTON	0x08
+#define PGDR_REWIND_BUTTON	0x10
+#define PGDR_RECORD_BUTTON	0x20
+
+#define PHDR_TS_PEN_DOWN	0x08
+
+#define PJDR_LED_BLINK		0x02
+
+#define PKDR_LED_GREEN		0x10
+
+#define SCPDR_TS_SCAN_ENABLE	0x20
+#define SCPDR_TS_SCAN_Y		0x02
+#define SCPDR_TS_SCAN_X		0x01
+
+#define SCPCR_TS_ENABLE		0x405
+#define SCPCR_TS_MASK		0xc0f
+
+#define ADC_CHANNEL_TS_Y	1
+#define ADC_CHANNEL_TS_X	2
+#define ADC_CHANNEL_BATTERY	3
+#define ADC_CHANNEL_BACKUP	4
+#define ADC_CHANNEL_CHARGE	5
+
+#define HD64461_GPADR_SPEAKER	0x01
+#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
+
+#define HD64461_GPBDR_LCDOFF	0x01
+#define HD64461_GPBDR_LCD_CONTRAST_MASK	0x78
+#define HD64461_GPBDR_LED_RED	0x80
+
+#include <asm/hd64461.h>
+#include <asm/io.h>
+
+#define PJDR	0xa4000130
+#define PKDR	0xa4000132
+
+#endif /* __ASM_SH_HP6XX_H */
diff --git a/arch/sh/include/asm/hugetlb.h b/arch/sh/include/asm/hugetlb.h
new file mode 100644
index 00000000000..967068fb79a
--- /dev/null
+++ b/arch/sh/include/asm/hugetlb.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_SH_HUGETLB_H
+#define _ASM_SH_HUGETLB_H
+
+#include <asm/page.h>
+
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_SH_HUGETLB_H */
diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h
new file mode 100644
index 00000000000..d557b00111b
--- /dev/null
+++ b/arch/sh/include/asm/hw_irq.h
@@ -0,0 +1,123 @@
+#ifndef __ASM_SH_HW_IRQ_H
+#define __ASM_SH_HW_IRQ_H
+
+#include <linux/init.h>
+#include <asm/atomic.h>
+
+extern atomic_t irq_err_count;
+
+struct ipr_data {
+	unsigned char irq;
+	unsigned char ipr_idx;		/* Index for the IPR registered */
+	unsigned char shift;		/* Number of bits to shift the data */
+	unsigned char priority;		/* The priority */
+};
+
+struct ipr_desc {
+	unsigned long *ipr_offsets;
+	unsigned int nr_offsets;
+	struct ipr_data *ipr_data;
+	unsigned int nr_irqs;
+	struct irq_chip chip;
+};
+
+void register_ipr_controller(struct ipr_desc *);
+
+typedef unsigned char intc_enum;
+
+struct intc_vect {
+	intc_enum enum_id;
+	unsigned short vect;
+};
+
+#define INTC_VECT(enum_id, vect) { enum_id, vect }
+#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
+
+struct intc_group {
+	intc_enum enum_id;
+	intc_enum enum_ids[32];
+};
+
+#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
+
+struct intc_mask_reg {
+	unsigned long set_reg, clr_reg, reg_width;
+	intc_enum enum_ids[32];
+#ifdef CONFIG_SMP
+	unsigned long smp;
+#endif
+};
+
+struct intc_prio_reg {
+	unsigned long set_reg, clr_reg, reg_width, field_width;
+	intc_enum enum_ids[16];
+#ifdef CONFIG_SMP
+	unsigned long smp;
+#endif
+};
+
+struct intc_sense_reg {
+	unsigned long reg, reg_width, field_width;
+	intc_enum enum_ids[16];
+};
+
+#ifdef CONFIG_SMP
+#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
+#else
+#define INTC_SMP(stride, nr)
+#endif
+
+struct intc_desc {
+	struct intc_vect *vectors;
+	unsigned int nr_vectors;
+	struct intc_group *groups;
+	unsigned int nr_groups;
+	struct intc_mask_reg *mask_regs;
+	unsigned int nr_mask_regs;
+	struct intc_prio_reg *prio_regs;
+	unsigned int nr_prio_regs;
+	struct intc_sense_reg *sense_regs;
+	unsigned int nr_sense_regs;
+	char *name;
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
+	struct intc_mask_reg *ack_regs;
+	unsigned int nr_ack_regs;
+#endif
+};
+
+#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
+#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,		\
+	mask_regs, prio_regs, sense_regs)				\
+struct intc_desc symbol __initdata = {					\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
+	_INTC_ARRAY(sense_regs),					\
+	chipname,							\
+}
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
+	mask_regs, prio_regs, sense_regs, ack_regs)			\
+struct intc_desc symbol __initdata = {					\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
+	_INTC_ARRAY(sense_regs),					\
+	chipname,							\
+	_INTC_ARRAY(ack_regs),						\
+}
+#endif
+
+void __init register_intc_controller(struct intc_desc *desc);
+int intc_set_priority(unsigned int irq, unsigned int prio);
+
+void __init plat_irq_setup(void);
+#ifdef CONFIG_CPU_SH3
+void __init plat_irq_setup_sh3(void);
+#endif
+
+enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
+       IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
+       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
+void __init plat_irq_setup_pins(int mode);
+
+#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/arch/sh/include/asm/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
new file mode 100644
index 00000000000..24182116711
--- /dev/null
+++ b/arch/sh/include/asm/i2c-sh7760.h
@@ -0,0 +1,22 @@
+/*
+ * MMIO/IRQ and platform data for SH7760 I2C channels
+ */
+
+#ifndef _I2C_SH7760_H_
+#define _I2C_SH7760_H_
+
+#define SH7760_I2C_DEVNAME	"sh7760-i2c"
+
+#define SH7760_I2C0_MMIO	0xFE140000
+#define SH7760_I2C0_MMIOEND	0xFE14003B
+#define SH7760_I2C0_IRQ		62
+
+#define SH7760_I2C1_MMIO	0xFE150000
+#define SH7760_I2C1_MMIOEND	0xFE15003B
+#define SH7760_I2C1_IRQ		63
+
+struct sh7760_i2c_platdata {
+	unsigned int speed_khz;
+};
+
+#endif
diff --git a/arch/sh/include/asm/ilsel.h b/arch/sh/include/asm/ilsel.h
new file mode 100644
index 00000000000..e3d304b280f
--- /dev/null
+++ b/arch/sh/include/asm/ilsel.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_SH_ILSEL_H
+#define __ASM_SH_ILSEL_H
+
+typedef enum {
+	ILSEL_NONE,
+	ILSEL_LAN,
+	ILSEL_USBH_I,
+	ILSEL_USBH_S,
+	ILSEL_USBH_V,
+	ILSEL_RTC,
+	ILSEL_USBP_I,
+	ILSEL_USBP_S,
+	ILSEL_USBP_V,
+	ILSEL_KEY,
+
+	/*
+	 * ILSEL Aliases - corner cases for interleaved level tables.
+	 *
+	 * Someone thought this was a good idea and less hassle than
+	 * demuxing a shared vector, really.
+	 */
+
+	/* ILSEL0 and 2 */
+	ILSEL_FPGA0,
+	ILSEL_FPGA1,
+	ILSEL_EX1,
+	ILSEL_EX2,
+	ILSEL_EX3,
+	ILSEL_EX4,
+
+	/* ILSEL1 and 3 */
+	ILSEL_FPGA2 = ILSEL_FPGA0,
+	ILSEL_FPGA3 = ILSEL_FPGA1,
+	ILSEL_EX5 = ILSEL_EX1,
+	ILSEL_EX6 = ILSEL_EX2,
+	ILSEL_EX7 = ILSEL_EX3,
+	ILSEL_EX8 = ILSEL_EX4,
+} ilsel_source_t;
+
+/* arch/sh/boards/renesas/x3proto/ilsel.c */
+int ilsel_enable(ilsel_source_t set);
+int ilsel_enable_fixed(ilsel_source_t set, unsigned int level);
+void ilsel_disable(unsigned int irq);
+
+#endif /* __ASM_SH_ILSEL_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
new file mode 100644
index 00000000000..a4fbf0c84fb
--- /dev/null
+++ b/arch/sh/include/asm/io.h
@@ -0,0 +1,366 @@
+#ifndef __ASM_SH_IO_H
+#define __ASM_SH_IO_H
+
+/*
+ * Convention:
+ *    read{b,w,l}/write{b,w,l} are for PCI,
+ *    while in{b,w,l}/out{b,w,l} are for ISA
+ * These may (will) be platform specific function.
+ * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
+ * and 'string' versions: ins{b,w,l}/outs{b,w,l}
+ * For read{b,w,l} and write{b,w,l} there are also __raw versions, which
+ * do not have a memory barrier after them.
+ *
+ * In addition, we have
+ *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
+ *   which are processor specific.
+ */
+
+/*
+ * We follow the Alpha convention here:
+ *  __inb expands to an inline function call (which calls via the mv)
+ *  _inb  is a real function call (note ___raw fns are _ version of __raw)
+ *  inb   by default expands to _inb, but the machine specific code may
+ *        define it to __inb if it chooses.
+ */
+#include <asm/cache.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <asm/machvec.h>
+#include <asm/pgtable.h>
+#include <asm-generic/iomap.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Depending on which platform we are running on, we need different
+ * I/O functions.
+ */
+#define __IO_PREFIX	generic
+#include <asm/io_generic.h>
+#include <asm/io_trapped.h>
+
+#define maybebadio(port) \
+  printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
+	 __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0))
+
+/*
+ * Since boards are able to define their own set of I/O routines through
+ * their respective machine vector, we always wrap through the mv.
+ *
+ * Also, in the event that a board hasn't provided its own definition for
+ * a given routine, it will be wrapped to generic code at run-time.
+ */
+
+#define __inb(p)	sh_mv.mv_inb((p))
+#define __inw(p)	sh_mv.mv_inw((p))
+#define __inl(p)	sh_mv.mv_inl((p))
+#define __outb(x,p)	sh_mv.mv_outb((x),(p))
+#define __outw(x,p)	sh_mv.mv_outw((x),(p))
+#define __outl(x,p)	sh_mv.mv_outl((x),(p))
+
+#define __inb_p(p)	sh_mv.mv_inb_p((p))
+#define __inw_p(p)	sh_mv.mv_inw_p((p))
+#define __inl_p(p)	sh_mv.mv_inl_p((p))
+#define __outb_p(x,p)	sh_mv.mv_outb_p((x),(p))
+#define __outw_p(x,p)	sh_mv.mv_outw_p((x),(p))
+#define __outl_p(x,p)	sh_mv.mv_outl_p((x),(p))
+
+#define __insb(p,b,c)	sh_mv.mv_insb((p), (b), (c))
+#define __insw(p,b,c)	sh_mv.mv_insw((p), (b), (c))
+#define __insl(p,b,c)	sh_mv.mv_insl((p), (b), (c))
+#define __outsb(p,b,c)	sh_mv.mv_outsb((p), (b), (c))
+#define __outsw(p,b,c)	sh_mv.mv_outsw((p), (b), (c))
+#define __outsl(p,b,c)	sh_mv.mv_outsl((p), (b), (c))
+
+#define __readb(a)	sh_mv.mv_readb((a))
+#define __readw(a)	sh_mv.mv_readw((a))
+#define __readl(a)	sh_mv.mv_readl((a))
+#define __writeb(v,a)	sh_mv.mv_writeb((v),(a))
+#define __writew(v,a)	sh_mv.mv_writew((v),(a))
+#define __writel(v,a)	sh_mv.mv_writel((v),(a))
+
+#define inb		__inb
+#define inw		__inw
+#define inl		__inl
+#define outb		__outb
+#define outw		__outw
+#define outl		__outl
+
+#define inb_p		__inb_p
+#define inw_p		__inw_p
+#define inl_p		__inl_p
+#define outb_p		__outb_p
+#define outw_p		__outw_p
+#define outl_p		__outl_p
+
+#define insb		__insb
+#define insw		__insw
+#define insl		__insl
+#define outsb		__outsb
+#define outsw		__outsw
+#define outsl		__outsl
+
+#define __raw_readb(a)		__readb((void __iomem *)(a))
+#define __raw_readw(a)		__readw((void __iomem *)(a))
+#define __raw_readl(a)		__readl((void __iomem *)(a))
+#define __raw_writeb(v, a)	__writeb(v, (void __iomem *)(a))
+#define __raw_writew(v, a)	__writew(v, (void __iomem *)(a))
+#define __raw_writel(v, a)	__writel(v, (void __iomem *)(a))
+
+void __raw_writesl(unsigned long addr, const void *data, int longlen);
+void __raw_readsl(unsigned long addr, void *data, int longlen);
+
+/*
+ * The platform header files may define some of these macros to use
+ * the inlined versions where appropriate.  These macros may also be
+ * redefined by userlevel programs.
+ */
+#ifdef __readb
+# define readb(a)	({ unsigned int r_ = __raw_readb(a); mb(); r_; })
+#endif
+#ifdef __raw_readw
+# define readw(a)	({ unsigned int r_ = __raw_readw(a); mb(); r_; })
+#endif
+#ifdef __raw_readl
+# define readl(a)	({ unsigned int r_ = __raw_readl(a); mb(); r_; })
+#endif
+
+#ifdef __raw_writeb
+# define writeb(v,a)	({ __raw_writeb((v),(a)); mb(); })
+#endif
+#ifdef __raw_writew
+# define writew(v,a)	({ __raw_writew((v),(a)); mb(); })
+#endif
+#ifdef __raw_writel
+# define writel(v,a)	({ __raw_writel((v),(a)); mb(); })
+#endif
+
+#define __BUILD_MEMORY_STRING(bwlq, type)				\
+									\
+static inline void writes##bwlq(volatile void __iomem *mem,		\
+				const void *addr, unsigned int count)	\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__raw_write##bwlq(*__addr, mem);			\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
+			       unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __raw_read##bwlq(mem);			\
+		__addr++;						\
+	}								\
+}
+
+__BUILD_MEMORY_STRING(b, u8)
+__BUILD_MEMORY_STRING(w, u16)
+#define writesl __raw_writesl
+#define readsl  __raw_readsl
+
+#define readb_relaxed(a) readb(a)
+#define readw_relaxed(a) readw(a)
+#define readl_relaxed(a) readl(a)
+
+/* Simple MMIO */
+#define ioread8(a)		readb(a)
+#define ioread16(a)		readw(a)
+#define ioread16be(a)		be16_to_cpu(__raw_readw((a)))
+#define ioread32(a)		readl(a)
+#define ioread32be(a)		be32_to_cpu(__raw_readl((a)))
+
+#define iowrite8(v,a)		writeb((v),(a))
+#define iowrite16(v,a)		writew((v),(a))
+#define iowrite16be(v,a)	__raw_writew(cpu_to_be16((v)),(a))
+#define iowrite32(v,a)		writel((v),(a))
+#define iowrite32be(v,a)	__raw_writel(cpu_to_be32((v)),(a))
+
+#define ioread8_rep(a, d, c)	readsb((a), (d), (c))
+#define ioread16_rep(a, d, c)	readsw((a), (d), (c))
+#define ioread32_rep(a, d, c)	readsl((a), (d), (c))
+
+#define iowrite8_rep(a, s, c)	writesb((a), (s), (c))
+#define iowrite16_rep(a, s, c)	writesw((a), (s), (c))
+#define iowrite32_rep(a, s, c)	writesl((a), (s), (c))
+
+#define mmiowb()	wmb()	/* synco on SH-4A, otherwise a nop */
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * This function provides a method for the generic case where a board-specific
+ * ioport_map simply needs to return the port + some arbitrary port base.
+ *
+ * We use this at board setup time to implicitly set the port base, and
+ * as a result, we can use the generic ioport_map.
+ */
+static inline void __set_io_port_base(unsigned long pbase)
+{
+	extern unsigned long generic_io_base;
+
+	generic_io_base = pbase;
+}
+
+#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
+
+/* We really want to try and get these to memcpy etc */
+extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long);
+extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
+extern void memset_io(volatile void __iomem *, int, unsigned long);
+
+/* SuperH on-chip I/O functions */
+static inline unsigned char ctrl_inb(unsigned long addr)
+{
+	return *(volatile unsigned char*)addr;
+}
+
+static inline unsigned short ctrl_inw(unsigned long addr)
+{
+	return *(volatile unsigned short*)addr;
+}
+
+static inline unsigned int ctrl_inl(unsigned long addr)
+{
+	return *(volatile unsigned long*)addr;
+}
+
+static inline unsigned long long ctrl_inq(unsigned long addr)
+{
+	return *(volatile unsigned long long*)addr;
+}
+
+static inline void ctrl_outb(unsigned char b, unsigned long addr)
+{
+	*(volatile unsigned char*)addr = b;
+}
+
+static inline void ctrl_outw(unsigned short b, unsigned long addr)
+{
+	*(volatile unsigned short*)addr = b;
+}
+
+static inline void ctrl_outl(unsigned int b, unsigned long addr)
+{
+        *(volatile unsigned long*)addr = b;
+}
+
+static inline void ctrl_outq(unsigned long long b, unsigned long addr)
+{
+	*(volatile unsigned long long*)addr = b;
+}
+
+static inline void ctrl_delay(void)
+{
+#ifdef P2SEG
+	ctrl_inw(P2SEG);
+#endif
+}
+
+/* Quad-word real-mode I/O, don't ask.. */
+unsigned long long peek_real_address_q(unsigned long long addr);
+unsigned long long poke_real_address_q(unsigned long long addr,
+				       unsigned long long val);
+
+#if !defined(CONFIG_MMU)
+#define virt_to_phys(address)	((unsigned long)(address))
+#define phys_to_virt(address)	((void *)(address))
+#else
+#define virt_to_phys(address)	(__pa(address))
+#define phys_to_virt(address)	(__va(address))
+#endif
+
+/*
+ * On 32-bit SH, we traditionally have the whole physical address space
+ * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do
+ * not need to do anything but place the address in the proper segment.
+ * This is true for P1 and P2 addresses, as well as some P3 ones.
+ * However, most of the P3 addresses and newer cores using extended
+ * addressing need to map through page tables, so the ioremap()
+ * implementation becomes a bit more complicated.
+ *
+ * See arch/sh/mm/ioremap.c for additional notes on this.
+ *
+ * We cheat a bit and always return uncachable areas until we've fixed
+ * the drivers to handle caching properly.
+ *
+ * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply
+ * doesn't exist, so everything must go through page tables.
+ */
+#ifdef CONFIG_MMU
+void __iomem *__ioremap(unsigned long offset, unsigned long size,
+			unsigned long flags);
+void __iounmap(void __iomem *addr);
+
+/* arch/sh/mm/ioremap_64.c */
+unsigned long onchip_remap(unsigned long addr, unsigned long size,
+			   const char *name);
+extern void onchip_unmap(unsigned long vaddr);
+#else
+#define __ioremap(offset, size, flags)	((void __iomem *)(offset))
+#define __iounmap(addr)			do { } while (0)
+#define onchip_remap(addr, size, name)	(addr)
+#define onchip_unmap(addr)		do { } while (0)
+#endif /* CONFIG_MMU */
+
+static inline void __iomem *
+__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
+{
+#ifdef CONFIG_SUPERH32
+	unsigned long last_addr = offset + size - 1;
+#endif
+	void __iomem *ret;
+
+	ret = __ioremap_trapped(offset, size);
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_SUPERH32
+	/*
+	 * For P1 and P2 space this is trivial, as everything is already
+	 * mapped. Uncached access for P1 addresses are done through P2.
+	 * In the P3 case or for addresses outside of the 29-bit space,
+	 * mapping must be done by the PMB or by using page tables.
+	 */
+	if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
+		if (unlikely(flags & _PAGE_CACHABLE))
+			return (void __iomem *)P1SEGADDR(offset);
+
+		return (void __iomem *)P2SEGADDR(offset);
+	}
+#endif
+
+	return __ioremap(offset, size, flags);
+}
+
+#define ioremap(offset, size)				\
+	__ioremap_mode((offset), (size), 0)
+#define ioremap_nocache(offset, size)			\
+	__ioremap_mode((offset), (size), 0)
+#define ioremap_cache(offset, size)			\
+	__ioremap_mode((offset), (size), _PAGE_CACHABLE)
+#define p3_ioremap(offset, size, flags)			\
+	__ioremap((offset), (size), (flags))
+#define iounmap(addr)					\
+	__iounmap((addr))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_IO_H */
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
new file mode 100644
index 00000000000..92fc6070d7b
--- /dev/null
+++ b/arch/sh/include/asm/io_generic.h
@@ -0,0 +1,49 @@
+/*
+ * Trivial I/O routine definitions, intentionally meant to be included
+ * multiple times. Ugly I/O routine concatenation helpers taken from
+ * alpha. Must be included _before_ io.h to avoid preprocessor-induced
+ * routine mismatch.
+ */
+#define IO_CONCAT(a,b)	_IO_CONCAT(a,b)
+#define _IO_CONCAT(a,b)	a ## _ ## b
+
+#ifndef __IO_PREFIX
+#error "Don't include this header without a valid system prefix"
+#endif
+
+u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long);
+u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long);
+u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long);
+
+void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long);
+
+u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long);
+u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long);
+u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long);
+void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long);
+
+void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
+
+u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *);
+u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *);
+u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *);
+
+void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
+void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
+
+void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
+void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
+
+#undef __IO_PREFIX
diff --git a/arch/sh/include/asm/io_trapped.h b/arch/sh/include/asm/io_trapped.h
new file mode 100644
index 00000000000..f1251d4f0ba
--- /dev/null
+++ b/arch/sh/include/asm/io_trapped.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_SH_IO_TRAPPED_H
+#define __ASM_SH_IO_TRAPPED_H
+
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <asm/page.h>
+
+#define IO_TRAPPED_MAGIC 0xfeedbeef
+
+struct trapped_io {
+	unsigned int magic;
+	struct resource *resource;
+	unsigned int num_resources;
+	unsigned int minimum_bus_width;
+	struct list_head list;
+	void __iomem *virt_base;
+} __aligned(PAGE_SIZE);
+
+#ifdef CONFIG_IO_TRAPPED
+int register_trapped_io(struct trapped_io *tiop);
+int handle_trapped_io(struct pt_regs *regs, unsigned long address);
+
+void __iomem *match_trapped_io_handler(struct list_head *list,
+				       unsigned long offset,
+				       unsigned long size);
+
+#ifdef CONFIG_HAS_IOMEM
+extern struct list_head trapped_mem;
+
+static inline void __iomem *
+__ioremap_trapped(unsigned long offset, unsigned long size)
+{
+	return match_trapped_io_handler(&trapped_mem, offset, size);
+}
+#else
+#define __ioremap_trapped(offset, size) NULL
+#endif
+
+#ifdef CONFIG_HAS_IOPORT
+extern struct list_head trapped_io;
+
+static inline void __iomem *
+__ioport_map_trapped(unsigned long offset, unsigned long size)
+{
+	return match_trapped_io_handler(&trapped_io, offset, size);
+}
+#else
+#define __ioport_map_trapped(offset, size) NULL
+#endif
+
+#else
+#define register_trapped_io(tiop) (-1)
+#define handle_trapped_io(tiop, address) 0
+#define __ioremap_trapped(offset, size) NULL
+#define __ioport_map_trapped(offset, size) NULL
+#endif
+
+#endif /* __ASM_SH_IO_TRAPPED_H */
diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/sh/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h
new file mode 100644
index 00000000000..c212c371a4a
--- /dev/null
+++ b/arch/sh/include/asm/ioctls.h
@@ -0,0 +1,103 @@
+#ifndef __ASM_SH_IOCTLS_H
+#define __ASM_SH_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+
+#define TCGETA		0x80127417	/* _IOR('t', 23, struct termio) */
+#define TCSETA		0x40127418	/* _IOW('t', 24, struct termio) */
+#define TCSETAW		0x40127419	/* _IOW('t', 25, struct termio) */
+#define TCSETAF		0x4012741C	/* _IOW('t', 28, struct termio) */
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	0x40087467	/* _IOW('t', 103, struct winsize) */
+#define TIOCGWINSZ	0x80087468	/* _IOR('t', 104, struct winsize) */
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	_IO('T', 12) /* 0x540C */
+#define TIOCNXCL	_IO('T', 13) /* 0x540D */
+#define TIOCSCTTY	_IO('T', 14) /* 0x540E */
+
+#define TIOCSTI		_IOW('T', 18, char) /* 0x5412 */
+#define TIOCMGET	_IOR('T', 21, unsigned int) /* 0x5415 */
+#define TIOCMBIS	_IOW('T', 22, unsigned int) /* 0x5416 */
+#define TIOCMBIC	_IOW('T', 23, unsigned int) /* 0x5417 */
+#define TIOCMSET	_IOW('T', 24, unsigned int) /* 0x5418 */
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+
+#define TIOCGSOFTCAR	_IOR('T', 25, unsigned int) /* 0x5419 */
+#define TIOCSSOFTCAR	_IOW('T', 26, unsigned int) /* 0x541A */
+#define TIOCLINUX	_IOW('T', 28, char) /* 0x541C */
+#define TIOCCONS	_IO('T', 29) /* 0x541D */
+#define TIOCGSERIAL	0x803C541E	/* _IOR('T', 30, struct serial_struct) 0x541E */
+#define TIOCSSERIAL	0x403C541F	/* _IOW('T', 31, struct serial_struct) 0x541F */
+#define TIOCPKT		_IOW('T', 32, int) /* 0x5420 */
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	_IO('T', 34) /* 0x5422 */
+#define TIOCSETD	_IOW('T', 35, int) /* 0x5423 */
+#define TIOCGETD	_IOR('T', 36, int) /* 0x5424 */
+#define TCSBRKP		_IOW('T', 37, int) /* 0x5425 */	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	_IO('T', 39) /* 0x5427 */ /* BSD compatibility */
+#define TIOCCBRK	_IO('T', 40) /* 0x5428 */ /* BSD compatibility */
+#define TIOCGSID	_IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 42, struct termios2)
+#define TCSETS2		_IOW('T', 43, struct termios2)
+#define TCSETSW2	_IOW('T', 44, struct termios2)
+#define TCSETSF2	_IOW('T', 45, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */
+#define TIOCSERGWILD	_IOR('T', 84,  int) /* 0x5454 */
+#define TIOCSERSWILD	_IOW('T', 85,  int) /* 0x5455 */
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x80d85458	/* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */
+#define TIOCSERGETLSR   _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x80A8545A	/* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */
+#define TIOCSERSETMULTI 0x40A8545B	/* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
+
+#define TIOCMIWAIT	_IO('T', 92) /* 0x545C */	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif /* __ASM_SH_IOCTLS_H */
diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..5ffc9972a7e
--- /dev/null
+++ b/arch/sh/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_SH_IPCBUF_H__
+#define __ASM_SH_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASM_SH_IPCBUF_H__ */
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
new file mode 100644
index 00000000000..6195a531c1b
--- /dev/null
+++ b/arch/sh/include/asm/irq.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_SH_IRQ_H
+#define __ASM_SH_IRQ_H
+
+#include <asm/machvec.h>
+
+/*
+ * A sane default based on a reasonable vector table size, platforms are
+ * advised to cap this at the hard limit that they're interested in
+ * through the machvec.
+ */
+#define NR_IRQS 256
+
+/*
+ * Convert back and forth between INTEVT and IRQ values.
+ */
+#ifdef CONFIG_CPU_HAS_INTEVT
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+#else
+#define evt2irq(evt)		(evt)
+#define irq2evt(irq)		(irq)
+#endif
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * PINT IRQs
+ */
+void init_IRQ_pint(void);
+void make_imask_irq(unsigned int irq);
+
+static inline int generic_irq_demux(int irq)
+{
+	return irq;
+}
+
+#define irq_canonicalize(irq)	(irq)
+#define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
+
+#ifdef CONFIG_IRQSTACKS
+extern void irq_ctx_init(int cpu);
+extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+#endif
+
+#ifdef CONFIG_CPU_SH5
+#include <cpu/irq.h>
+#endif
+
+#endif /* __ASM_SH_IRQ_H */
diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/sh/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h
new file mode 100644
index 00000000000..46e71da5be6
--- /dev/null
+++ b/arch/sh/include/asm/irqflags.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH_IRQFLAGS_H
+#define __ASM_SH_IRQFLAGS_H
+
+#ifdef CONFIG_SUPERH32
+#include "irqflags_32.h"
+#else
+#include "irqflags_64.h"
+#endif
+
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags != 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if ((flags & 0xf0) != 0xf0)
+		raw_local_irq_enable();
+}
+
+#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/arch/sh/include/asm/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
new file mode 100644
index 00000000000..60218f54134
--- /dev/null
+++ b/arch/sh/include/asm/irqflags_32.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_SH_IRQFLAGS_32_H
+#define __ASM_SH_IRQFLAGS_32_H
+
+static inline void raw_local_irq_enable(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%1, %0\n\t"
+#ifdef CONFIG_CPU_HAS_SR_RB
+		"stc	r6_bank, %1\n\t"
+		"or	%1, %0\n\t"
+#endif
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x000000f0)
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	#0xf0, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline void set_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	%2, %0\n\t"
+		"and	%3, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "r" (0x10000000), "r" (0xffffff0f)
+		: "memory"
+	);
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%2, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x10000000)
+		: "memory"
+	);
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags, __dummy;
+
+	__asm__ __volatile__ (
+		"stc	sr, %1\n\t"
+		"mov	%1, %0\n\t"
+		"or	#0xf0, %0\n\t"
+		"ldc	%0, sr\n\t"
+		"mov	%1, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags), "=&r" (__dummy)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+
+#endif /* __ASM_SH_IRQFLAGS_32_H */
diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
new file mode 100644
index 00000000000..88f65222c1d
--- /dev/null
+++ b/arch/sh/include/asm/irqflags_64.h
@@ -0,0 +1,85 @@
+#ifndef __ASM_SH_IRQFLAGS_64_H
+#define __ASM_SH_IRQFLAGS_64_H
+
+#include <cpu/registers.h>
+
+#define SR_MASK_LL	0x00000000000000f0LL
+#define SR_BL_LL	0x0000000010000000LL
+
+static inline void raw_local_irq_enable(void)
+{
+	unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline void set_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long long __dummy = SR_MASK_LL;
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"getcon	" __SR ", %0\n\t"
+		"and	%0, %1, %0"
+		: "=&r" (flags)
+		: "r" (__dummy));
+
+	return flags;
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"getcon	" __SR ", %1\n\t"
+		"or	%1, r63, %0\n\t"
+		"or	%1, %2, %1\n\t"
+		"putcon	%1, " __SR "\n\t"
+		"and	%0, %2, %0"
+		: "=&r" (flags), "=&r" (__dummy0)
+		: "r" (__dummy1));
+
+	return flags;
+}
+
+#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
new file mode 100644
index 00000000000..49cd69051a8
--- /dev/null
+++ b/arch/sh/include/asm/kdebug.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_KDEBUG_H
+#define __ASM_SH_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_TRAP,
+};
+
+#endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h
new file mode 100644
index 00000000000..765a5e1660f
--- /dev/null
+++ b/arch/sh/include/asm/kexec.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_SH_KEXEC_H
+#define __ASM_SH_KEXEC_H
+
+#include <asm/ptrace.h>
+#include <asm/string.h>
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
+ * calculation for the amount of memory directly mappable into the
+ * kernel memory space.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_PAGE_SIZE	4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_SH
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		__asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
+		__asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
+		__asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
+		__asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
+		__asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
+		__asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
+		__asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
+		__asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
+		__asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
+		__asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
+		__asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
+		__asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
+		__asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
+		__asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
+		__asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
+		__asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
+
+		__asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
+		__asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
+		__asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
+
+		__asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
+		__asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
+
+		newregs->pc = (unsigned long)current_text_addr();
+	}
+}
+#endif /* __ASM_SH_KEXEC_H */
diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h
new file mode 100644
index 00000000000..24e42078f36
--- /dev/null
+++ b/arch/sh/include/asm/kgdb.h
@@ -0,0 +1,69 @@
+/*
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on original code by Glenn Engel, Jim Kingdon,
+ * David Grothe <dave@gcom.com>, Tigran Aivazian, <tigran@sco.com> and
+ * Amit S. Kale <akale@veritas.com>
+ * 
+ * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by
+ * Henry Bell <henry.bell@st.com>
+ * 
+ * Header file for low-level support for remote debug using GDB. 
+ *
+ */
+
+#ifndef __KGDB_H
+#define __KGDB_H
+
+#include <asm/ptrace.h>
+
+/* Same as pt_regs but has vbr in place of syscall_nr */
+struct kgdb_regs {
+        unsigned long regs[16];
+        unsigned long pc;
+        unsigned long pr;
+        unsigned long sr;
+        unsigned long gbr;
+        unsigned long mach;
+        unsigned long macl;
+        unsigned long vbr;
+};
+
+/* State info */
+extern char kgdb_in_gdb_mode;
+extern int kgdb_nofault;	/* Ignore bus errors (in gdb mem access) */
+extern char in_nmi;		/* Debounce flag to prevent NMI reentry*/
+
+/* SCI */
+extern int kgdb_portnum;
+extern int kgdb_baud;
+extern char kgdb_parity;
+extern char kgdb_bits;
+
+/* Init and interface stuff */
+extern int kgdb_init(void);
+extern int (*kgdb_getchar)(void);
+extern void (*kgdb_putchar)(int);
+
+/* Trap functions */
+typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
+typedef void (kgdb_bus_error_hook_t)(void);
+extern kgdb_debug_hook_t  *kgdb_debug_hook;
+extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
+
+/* Console */
+struct console;
+void kgdb_console_write(struct console *co, const char *s, unsigned count);
+extern int kgdb_console_setup(struct console *, char *);
+
+/* Prototypes for jmp fns */
+#define _JBLEN 9
+typedef        int jmp_buf[_JBLEN];
+extern void    longjmp(jmp_buf __jmpb, int __retval);
+extern int     setjmp(jmp_buf __jmpb);
+
+/* Forced breakpoint */
+#define breakpoint()	__asm__ __volatile__("trapa   #0x3c")
+
+#endif
diff --git a/arch/sh/include/asm/kmap_types.h b/arch/sh/include/asm/kmap_types.h
new file mode 100644
index 00000000000..84d565c696b
--- /dev/null
+++ b/arch/sh/include/asm/kmap_types.h
@@ -0,0 +1,32 @@
+#ifndef __SH_KMAP_TYPES_H
+#define __SH_KMAP_TYPES_H
+
+/* Dummy header just to define km_type. */
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/arch/sh/include/asm/lboxre2.h b/arch/sh/include/asm/lboxre2.h
new file mode 100644
index 00000000000..e6d16050492
--- /dev/null
+++ b/arch/sh/include/asm/lboxre2.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_LBOXRE2_H
+#define __ASM_SH_LBOXRE2_H
+
+/*
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#define IRQ_CF1		9	/* CF1 */
+#define IRQ_CF0		10	/* CF0 */
+#define IRQ_INTD	11	/* INTD */
+#define IRQ_ETH1	12	/* Ether1 */
+#define IRQ_ETH0	13	/* Ether0 */
+#define IRQ_INTA	14	/* INTA */
+
+void init_lboxre2_IRQ(void);
+
+#define __IO_PREFIX	lboxre2
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_LBOXRE2_H */
diff --git a/arch/sh/include/asm/linkage.h b/arch/sh/include/asm/linkage.h
new file mode 100644
index 00000000000..3565a4f4009
--- /dev/null
+++ b/arch/sh/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .balign 4
+#define __ALIGN_STR ".balign 4"
+
+#endif
diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h
new file mode 100644
index 00000000000..9ed9b9cb459
--- /dev/null
+++ b/arch/sh/include/asm/local.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH_LOCAL_H
+#define __ASM_SH_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __ASM_SH_LOCAL_H */
+
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
new file mode 100644
index 00000000000..b2e4124070a
--- /dev/null
+++ b/arch/sh/include/asm/machvec.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm-sh/machvec.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+
+#ifndef _ASM_SH_MACHVEC_H
+#define _ASM_SH_MACHVEC_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <asm/machtypes.h>
+
+struct device;
+
+struct sh_machine_vector {
+	void (*mv_setup)(char **cmdline_p);
+	const char *mv_name;
+	int mv_nr_irqs;
+
+	u8 (*mv_inb)(unsigned long);
+	u16 (*mv_inw)(unsigned long);
+	u32 (*mv_inl)(unsigned long);
+	void (*mv_outb)(u8, unsigned long);
+	void (*mv_outw)(u16, unsigned long);
+	void (*mv_outl)(u32, unsigned long);
+
+	u8 (*mv_inb_p)(unsigned long);
+	u16 (*mv_inw_p)(unsigned long);
+	u32 (*mv_inl_p)(unsigned long);
+	void (*mv_outb_p)(u8, unsigned long);
+	void (*mv_outw_p)(u16, unsigned long);
+	void (*mv_outl_p)(u32, unsigned long);
+
+	void (*mv_insb)(unsigned long, void *dst, unsigned long count);
+	void (*mv_insw)(unsigned long, void *dst, unsigned long count);
+	void (*mv_insl)(unsigned long, void *dst, unsigned long count);
+	void (*mv_outsb)(unsigned long, const void *src, unsigned long count);
+	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
+	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
+
+	u8 (*mv_readb)(void __iomem *);
+	u16 (*mv_readw)(void __iomem *);
+	u32 (*mv_readl)(void __iomem *);
+	void (*mv_writeb)(u8, void __iomem *);
+	void (*mv_writew)(u16, void __iomem *);
+	void (*mv_writel)(u32, void __iomem *);
+
+	int (*mv_irq_demux)(int irq);
+
+	void (*mv_init_irq)(void);
+	void (*mv_init_pci)(void);
+
+	void (*mv_heartbeat)(void);
+
+	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
+	void (*mv_ioport_unmap)(void __iomem *);
+};
+
+extern struct sh_machine_vector sh_mv;
+
+#define get_system_type()	sh_mv.mv_name
+
+#define __initmv \
+	__used __section(.machvec.init)
+
+#endif /* _ASM_SH_MACHVEC_H */
diff --git a/arch/sh/include/asm/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h
new file mode 100644
index 00000000000..c644a77ee35
--- /dev/null
+++ b/arch/sh/include/asm/magicpanelr2.h
@@ -0,0 +1,67 @@
+/*
+ *  include/asm-sh/magicpanelr2.h
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  I/O addresses and bitmasks for Magic Panel Release 2 board
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH_MAGICPANELR2_H
+#define __ASM_SH_MAGICPANELR2_H
+
+#include <asm/gpio.h>
+
+#define __IO_PREFIX mpr2
+#include <asm/io_generic.h>
+
+
+#define SETBITS_OUTB(mask, reg)   ctrl_outb(ctrl_inb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg)   ctrl_outw(ctrl_inw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg)   ctrl_outl(ctrl_inl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg)   ctrl_outb(ctrl_inb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg)   ctrl_outw(ctrl_inw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg)   ctrl_outl(ctrl_inl(reg) & ~mask, reg)
+
+
+#define PA_LED          PORT_PADR      /* LED */
+
+
+/* BSC */
+#define CMNCR           0xA4FD0000UL
+#define CS0BCR          0xA4FD0004UL
+#define CS2BCR          0xA4FD0008UL
+#define CS3BCR          0xA4FD000CUL
+#define CS4BCR          0xA4FD0010UL
+#define CS5ABCR         0xA4FD0014UL
+#define CS5BBCR         0xA4FD0018UL
+#define CS6ABCR         0xA4FD001CUL
+#define CS6BBCR         0xA4FD0020UL
+#define CS0WCR          0xA4FD0024UL
+#define CS2WCR          0xA4FD0028UL
+#define CS3WCR          0xA4FD002CUL
+#define CS4WCR          0xA4FD0030UL
+#define CS5AWCR         0xA4FD0034UL
+#define CS5BWCR         0xA4FD0038UL
+#define CS6AWCR         0xA4FD003CUL
+#define CS6BWCR         0xA4FD0040UL
+
+
+/* usb */
+
+#define PORT_UTRCTL		0xA405012CUL
+#define PORT_UCLKCR_W		0xA40A0008UL
+
+#define INTC_ICR0		0xA414FEE0UL
+#define INTC_ICR1		0xA4140010UL
+#define INTC_ICR2		0xA4140012UL
+
+/* MTD */
+
+#define MPR2_MTD_BOOTLOADER_SIZE	0x00060000UL
+#define MPR2_MTD_KERNEL_SIZE		0x00200000UL
+
+#endif  /* __ASM_SH_MAGICPANELR2_H */
diff --git a/arch/sh/include/asm/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..0aee96a9733
--- /dev/null
+++ b/arch/sh/include/asm/mc146818rtc.h
@@ -0,0 +1,7 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/sh/include/asm/microdev.h b/arch/sh/include/asm/microdev.h
new file mode 100644
index 00000000000..1aed15856e1
--- /dev/null
+++ b/arch/sh/include/asm/microdev.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-sh/microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * Definitions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#ifndef __ASM_SH_MICRODEV_H
+#define __ASM_SH_MICRODEV_H
+
+extern void init_microdev_irq(void);
+extern void microdev_print_fpga_intc_status(void);
+
+/*
+ * The following are useful macros for manipulating the interrupt
+ * controller (INTC) on the CPU-board FPGA.  should be noted that there
+ * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
+ * these are two different things, both of which need to be prorammed to
+ * correctly route - unfortunately, they have the same name and
+ * abbreviations!
+ */
+#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
+#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
+
+
+/*
+ * The following are the IRQ numbers for the Linux Kernel for external
+ * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
+ */
+#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
+#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
+#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
+#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
+#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
+
+/*
+ * The following are the IRQ numbers for the INTC on the FPGA for
+ * external interrupts.  i.e. the bits in the INTC registers in the
+ * FPGA.
+ */
+#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
+#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
+#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
+#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
+#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
+
+#define MICRODEV_IRQ_PCI_INTA		 8
+#define MICRODEV_IRQ_PCI_INTB		 9
+#define MICRODEV_IRQ_PCI_INTC		10
+#define MICRODEV_IRQ_PCI_INTD		11
+
+#define __IO_PREFIX microdev
+#include <asm/io_generic.h>
+
+#if defined(CONFIG_PCI)
+unsigned char  microdev_pci_inb(unsigned long port);
+unsigned short microdev_pci_inw(unsigned long port);
+unsigned long  microdev_pci_inl(unsigned long port);
+void           microdev_pci_outb(unsigned char  data, unsigned long port);
+void           microdev_pci_outw(unsigned short data, unsigned long port);
+void           microdev_pci_outl(unsigned long  data, unsigned long port);
+#endif
+
+#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h
new file mode 100644
index 00000000000..c12b632c540
--- /dev/null
+++ b/arch/sh/include/asm/migor.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+/*
+ * linux/include/asm-sh/migor.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ *
+ * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* GPIO */
+#define PORT_PACR 0xa4050100
+#define PORT_PDCR 0xa4050106
+#define PORT_PECR 0xa4050108
+#define PORT_PHCR 0xa405010e
+#define PORT_PJCR 0xa4050110
+#define PORT_PKCR 0xa4050112
+#define PORT_PLCR 0xa4050114
+#define PORT_PMCR 0xa4050116
+#define PORT_PRCR 0xa405011c
+#define PORT_PTCR 0xa4050140
+#define PORT_PUCR 0xa4050142
+#define PORT_PVCR 0xa4050144
+#define PORT_PWCR 0xa4050146
+#define PORT_PXCR 0xa4050148
+#define PORT_PYCR 0xa405014a
+#define PORT_PZCR 0xa405014c
+#define PORT_PADR 0xa4050120
+#define PORT_PHDR 0xa405012e
+#define PORT_PTDR 0xa4050160
+#define PORT_PWDR 0xa4050166
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRC 0xa405015c
+
+#define PORT_MSELCRB 0xa4050182
+
+#define PORT_PSELA 0xa405014e
+#define PORT_PSELB 0xa4050150
+#define PORT_PSELC 0xa4050152
+#define PORT_PSELD 0xa4050154
+#define PORT_PSELE 0xa4050156
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRB 0xa405015a
+#define PORT_HIZCRC 0xa405015c
+
+#define BSC_CS6ABCR 0xfec1001c
+
+#include <asm/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
+#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h
new file mode 100644
index 00000000000..156eb0225cf
--- /dev/null
+++ b/arch/sh/include/asm/mman.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_MMAN_H
+#define __ASM_SH_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __ASM_SH_MMAN_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
new file mode 100644
index 00000000000..fdcb93bc6d1
--- /dev/null
+++ b/arch/sh/include/asm/mmu.h
@@ -0,0 +1,76 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_id_t[NR_CPUS];
+
+typedef struct {
+#ifdef CONFIG_MMU
+	mm_context_id_t		id;
+	void			*vdso;
+#else
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+#endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	unsigned long		exec_fdpic_loadmap;
+	unsigned long		interp_fdpic_loadmap;
+#endif
+} mm_context_t;
+
+/*
+ * Privileged Space Mapping Buffer (PMB) definitions
+ */
+#define PMB_PASCR		0xff000070
+#define PMB_IRMCR		0xff000078
+
+#define PMB_ADDR		0xf6100000
+#define PMB_DATA		0xf7100000
+#define PMB_ENTRY_MAX		16
+#define PMB_E_MASK		0x0000000f
+#define PMB_E_SHIFT		8
+
+#define PMB_SZ_16M		0x00000000
+#define PMB_SZ_64M		0x00000010
+#define PMB_SZ_128M		0x00000080
+#define PMB_SZ_512M		0x00000090
+#define PMB_SZ_MASK		PMB_SZ_512M
+#define PMB_C			0x00000008
+#define PMB_WT			0x00000001
+#define PMB_UB			0x00000200
+#define PMB_V			0x00000100
+
+#define PMB_NO_ENTRY		(-1)
+
+struct pmb_entry;
+
+struct pmb_entry {
+	unsigned long vpn;
+	unsigned long ppn;
+	unsigned long flags;
+
+	/*
+	 * 0 .. NR_PMB_ENTRIES for specific entry selection, or
+	 * PMB_NO_ENTRY to search for a free one
+	 */
+	int entry;
+
+	struct pmb_entry *next;
+	/* Adjacent entry link for contiguous multi-entry mappings */
+	struct pmb_entry *link;
+};
+
+/* arch/sh/mm/pmb.c */
+int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+		    unsigned long flags, int *entry);
+int set_pmb_entry(struct pmb_entry *pmbe);
+void clear_pmb_entry(struct pmb_entry *pmbe);
+struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+			    unsigned long flags);
+void pmb_free(struct pmb_entry *pmbe);
+long pmb_remap(unsigned long virt, unsigned long phys,
+	       unsigned long size, unsigned long flags);
+void pmb_unmap(unsigned long addr);
+
+#endif /* __MMU_H */
+
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
new file mode 100644
index 00000000000..04c0c9733ad
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ *
+ * ASID handling idea taken from MIPS implementation.
+ */
+#ifndef __ASM_SH_MMU_CONTEXT_H
+#define __ASM_SH_MMU_CONTEXT_H
+
+#ifdef __KERNEL__
+#include <cpu/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * The MMU "context" consists of two things:
+ *    (a) TLB cache version (or round, cycle whatever expression you like)
+ *    (b) ASID (Address Space IDentifier)
+ */
+#define MMU_CONTEXT_ASID_MASK		0x000000ff
+#define MMU_CONTEXT_VERSION_MASK	0xffffff00
+#define MMU_CONTEXT_FIRST_VERSION	0x00000100
+#define NO_CONTEXT			0
+
+/* ASID is 8-bit value, so it can't be 0x100 */
+#define MMU_NO_ASID			0x100
+
+#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
+
+#ifdef CONFIG_MMU
+#define cpu_context(cpu, mm)	((mm)->context.id[cpu])
+
+#define cpu_asid(cpu, mm)	\
+	(cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
+
+/*
+ * Virtual Page Number mask
+ */
+#define MMU_VPN_MASK	0xfffff000
+
+#if defined(CONFIG_SUPERH32)
+#include "mmu_context_32.h"
+#else
+#include "mmu_context_64.h"
+#endif
+
+/*
+ * Get MMU context if needed.
+ */
+static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
+{
+	unsigned long asid = asid_cache(cpu);
+
+	/* Check if we have old version of context. */
+	if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
+		/* It's up to date, do nothing */
+		return;
+
+	/* It's old, we need to get new context with new version. */
+	if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
+		/*
+		 * We exhaust ASID of this version.
+		 * Flush all TLB and start new cycle.
+		 */
+		flush_tlb_all();
+
+#ifdef CONFIG_SUPERH64
+		/*
+		 * The SH-5 cache uses the ASIDs, requiring both the I and D
+		 * cache to be flushed when the ASID is exhausted. Weak.
+		 */
+		flush_cache_all();
+#endif
+
+		/*
+		 * Fix version; Note that we avoid version #0
+		 * to distingush NO_CONTEXT.
+		 */
+		if (!asid)
+			asid = MMU_CONTEXT_FIRST_VERSION;
+	}
+
+	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	int i;
+
+	for (i = 0; i < num_online_cpus(); i++)
+		cpu_context(i, mm) = NO_CONTEXT;
+
+	return 0;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
+{
+	get_mmu_context(mm, cpu);
+	set_asid(cpu_asid(cpu, mm));
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			     struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		cpu_set(cpu, next->cpu_vm_mask);
+		set_TTB(next->pgd);
+		activate_context(next, cpu);
+	} else
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+			activate_context(next, cpu);
+}
+#else
+#define get_mmu_context(mm)		do { } while (0)
+#define init_new_context(tsk,mm)	(0)
+#define destroy_context(mm)		do { } while (0)
+#define set_asid(asid)			do { } while (0)
+#define get_asid()			(0)
+#define cpu_asid(cpu, mm)		({ (void)cpu; 0; })
+#define switch_and_save_asid(asid)	(0)
+#define set_TTB(pgd)			do { } while (0)
+#define get_TTB()			(0)
+#define activate_context(mm,cpu)	do { } while (0)
+#define switch_mm(prev,next,tsk)	do { } while (0)
+#endif /* CONFIG_MMU */
+
+#define activate_mm(prev, next)		switch_mm((prev),(next),NULL)
+#define deactivate_mm(tsk,mm)		do { } while (0)
+#define enter_lazy_tlb(mm,tsk)		do { } while (0)
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
+/*
+ * If this processor has an MMU, we need methods to turn it off/on ..
+ * paging_init() will also have to be updated for the processor in
+ * question.
+ */
+static inline void enable_mmu(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	/* Enable MMU */
+	ctrl_outl(MMU_CONTROL_INIT, MMUCR);
+	ctrl_barrier();
+
+	if (asid_cache(cpu) == NO_CONTEXT)
+		asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
+
+	set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void disable_mmu(void)
+{
+	unsigned long cr;
+
+	cr = ctrl_inl(MMUCR);
+	cr &= ~MMU_CONTROL_INIT;
+	ctrl_outl(cr, MMUCR);
+
+	ctrl_barrier();
+}
+#else
+/*
+ * MMU control handlers for processors lacking memory
+ * management hardware.
+ */
+#define enable_mmu()	do { } while (0)
+#define disable_mmu()	do { } while (0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
new file mode 100644
index 00000000000..f4f9aebd68b
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context_32.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_SH_MMU_CONTEXT_32_H
+#define __ASM_SH_MMU_CONTEXT_32_H
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	/* Do nothing */
+}
+
+static inline void set_asid(unsigned long asid)
+{
+	unsigned long __dummy;
+
+	__asm__ __volatile__ ("mov.l	%2, %0\n\t"
+			      "and	%3, %0\n\t"
+			      "or	%1, %0\n\t"
+			      "mov.l	%0, %2"
+			      : "=&r" (__dummy)
+			      : "r" (asid), "m" (__m(MMU_PTEH)),
+			        "r" (0xffffff00));
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long asid;
+
+	__asm__ __volatile__ ("mov.l	%1, %0"
+			      : "=r" (asid)
+			      : "m" (__m(MMU_PTEH)));
+	asid &= MMU_CONTEXT_ASID_MASK;
+	return asid;
+}
+
+/* MMU_TTB is used for optimizing the fault handling. */
+static inline void set_TTB(pgd_t *pgd)
+{
+	ctrl_outl((unsigned long)pgd, MMU_TTB);
+}
+
+static inline pgd_t *get_TTB(void)
+{
+	return (pgd_t *)ctrl_inl(MMU_TTB);
+}
+#endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/arch/sh/include/asm/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h
new file mode 100644
index 00000000000..de121025d87
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context_64.h
@@ -0,0 +1,78 @@
+#ifndef __ASM_SH_MMU_CONTEXT_64_H
+#define __ASM_SH_MMU_CONTEXT_64_H
+
+/*
+ * sh64-specific mmu_context interface.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <cpu/registers.h>
+#include <asm/cacheflush.h>
+
+#define SR_ASID_MASK		0xffffffffff00ffffULL
+#define SR_ASID_SHIFT		16
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	/* Well, at least free TLB entries */
+	flush_tlb_mm(mm);
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long long sr;
+
+	asm volatile ("getcon   " __SR ", %0\n\t"
+		      : "=r" (sr));
+
+	sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
+	return (unsigned long) sr;
+}
+
+/* Set ASID into SR */
+static inline void set_asid(unsigned long asid)
+{
+	unsigned long long sr, pc;
+
+	asm volatile ("getcon	" __SR ", %0" : "=r" (sr));
+
+	sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
+
+	/*
+	 * It is possible that this function may be inlined and so to avoid
+	 * the assembler reporting duplicate symbols we make use of the
+	 * gas trick of generating symbols using numerics and forward
+	 * reference.
+	 */
+	asm volatile ("movi	1, %1\n\t"
+		      "shlli	%1, 28, %1\n\t"
+		      "or	%0, %1, %1\n\t"
+		      "putcon	%1, " __SR "\n\t"
+		      "putcon	%0, " __SSR "\n\t"
+		      "movi	1f, %1\n\t"
+		      "ori	%1, 1 , %1\n\t"
+		      "putcon	%1, " __SPC "\n\t"
+		      "rte\n"
+		      "1:\n\t"
+		      : "=r" (sr), "=r" (pc) : "0" (sr));
+}
+
+/* arch/sh/kernel/cpu/sh5/entry.S */
+extern unsigned long switch_and_save_asid(unsigned long new_asid);
+
+/* No spare register to twiddle, so use a software cache */
+extern pgd_t *mmu_pdtp_cache;
+
+#define set_TTB(pgd)	(mmu_pdtp_cache = (pgd))
+#define get_TTB()	(mmu_pdtp_cache)
+
+#endif /* __ASM_SH_MMU_CONTEXT_64_H */
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
new file mode 100644
index 00000000000..2969253c404
--- /dev/null
+++ b/arch/sh/include/asm/mmzone.h
@@ -0,0 +1,48 @@
+#ifndef __ASM_SH_MMZONE_H
+#define __ASM_SH_MMZONE_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)		(node_data[nid])
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_start_pfn + \
+				 NODE_DATA(nid)->node_spanned_pages)
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+	int nid;
+
+	for (nid = 0; nid < MAX_NUMNODES; nid++)
+		if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid))
+			break;
+
+	return nid;
+}
+
+static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn)
+{
+	return NODE_DATA(pfn_to_nid(pfn));
+}
+
+/* arch/sh/mm/numa.c */
+void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end);
+#else
+static inline void
+setup_bootmem_node(int nid, unsigned long start, unsigned long end)
+{
+}
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+/* Platform specific mem init */
+void __init plat_mem_setup(void);
+
+/* arch/sh/kernel/setup.c */
+void __init setup_bootmem_allocator(unsigned long start_pfn);
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+			       unsigned long end_pfn);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMZONE_H */
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
new file mode 100644
index 00000000000..46eccd33166
--- /dev/null
+++ b/arch/sh/include/asm/module.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_SH_MODULE_H
+#define _ASM_SH_MODULE_H
+
+/*
+ * This file contains the SH architecture specific module code.
+ */
+
+struct mod_arch_specific {
+	/* Nothing to see here .. */
+};
+
+#define Elf_Shdr		Elf32_Shdr
+#define Elf_Sym			Elf32_Sym
+#define Elf_Ehdr		Elf32_Ehdr
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2LE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3LE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4LE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5LE "
+# else
+#  error unknown processor family
+# endif
+#else
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2BE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3BE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4BE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5BE "
+# else
+#  error unknown processor family
+# endif
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_SH_MODULE_H */
diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h
new file mode 100644
index 00000000000..517432343fb
--- /dev/null
+++ b/arch/sh/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH_MSGBUF_H
+#define __ASM_SH_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_SH_MSGBUF_H */
diff --git a/arch/sh/include/asm/mutex.h b/arch/sh/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/sh/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
new file mode 100644
index 00000000000..77fb8bf02e4
--- /dev/null
+++ b/arch/sh/include/asm/page.h
@@ -0,0 +1,183 @@
+#ifndef __ASM_SH_PAGE_H
+#define __ASM_SH_PAGE_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#if defined(CONFIG_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error "Bogus kernel page size?"
+#endif
+
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PTE_MASK	PAGE_MASK
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT	16
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#define HPAGE_SHIFT	18
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define HPAGE_SHIFT	20
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT	22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#define HPAGE_SHIFT	26
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define HPAGE_SHIFT	29
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(1UL << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE-1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT-PAGE_SHIFT)
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long shm_align_mask;
+extern unsigned long max_low_pfn, min_low_pfn;
+extern unsigned long memory_start, memory_end;
+
+extern void clear_page(void *to);
+extern void copy_page(void *to, void *from);
+
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
+	(defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
+	 defined(CONFIG_SH7705_CACHE_32KB))
+struct page;
+struct vm_area_struct;
+extern void clear_user_page(void *to, unsigned long address, struct page *page);
+extern void copy_user_page(void *to, void *from, unsigned long address,
+			   struct page *page);
+#if defined(CONFIG_CPU_SH4)
+extern void copy_user_highpage(struct page *to, struct page *from,
+			       unsigned long vaddr, struct vm_area_struct *vma);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+#endif
+#else
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+#endif
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_X2TLB
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
+typedef struct { unsigned long long pgd; } pgd_t;
+#define pte_val(x) \
+	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+#define __pte(x) \
+	({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+#elif defined(CONFIG_SUPERH32)
+typedef struct { unsigned long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x)	((pte_t) { (x) } )
+#else
+typedef struct { unsigned long long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x)	((pte_t) { (x) } )
+#endif
+
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+typedef struct page *pgtable_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * __MEMORY_START and SIZE are the physical addresses and size of RAM.
+ */
+#define __MEMORY_START		CONFIG_MEMORY_START
+#define __MEMORY_SIZE		CONFIG_MEMORY_SIZE
+
+/*
+ * PAGE_OFFSET is the virtual address of the start of kernel address
+ * space.
+ */
+#define PAGE_OFFSET		CONFIG_PAGE_OFFSET
+
+/*
+ * Virtual to physical RAM address translation.
+ *
+ * In 29 bit mode, the physical offset of RAM from address 0 is visible in
+ * the kernel virtual address space, and thus we don't have to take
+ * this into account when translating. However in 32 bit mode this offset
+ * is not visible (it is part of the PMB mapping) and so needs to be
+ * added or subtracted as required.
+ */
+#ifdef CONFIG_32BIT
+#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
+#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
+#else
+#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET))
+#endif
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * PFN = physical frame number (ie PFN 0 == physical address 0)
+ * PFN_START is the PFN of the first page of RAM. By defining this we
+ * don't have struct page entries for the portion of address space
+ * between physical address 0 and the start of RAM.
+ */
+#define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET		(PFN_START)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+#endif
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+/* vDSO support */
+#ifdef CONFIG_VSYSCALL
+#define __HAVE_ARCH_GATE_AREA
+#endif
+
+/*
+ * Some drivers need to perform DMA into kmalloc'ed buffers
+ * and so we have to increase the kmalloc minalign for this.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+#ifdef CONFIG_SUPERH64
+/*
+ * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
+ * happily generate {ld/st}.q pairs, requiring us to have 8-byte
+ * alignment to avoid traps. The kmalloc alignment is gauranteed by
+ * virtue of L1_CACHE_BYTES, requiring this to only be special cased
+ * for slab caches.
+ */
+#define ARCH_SLAB_MINALIGN	8
+#endif
+
+#endif /* __ASM_SH_PAGE_H */
diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h
new file mode 100644
index 00000000000..ae245afdfd6
--- /dev/null
+++ b/arch/sh/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_SH_PARAM_H
+#define __ASM_SH_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* __ASM_SH_PARAM_H */
diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h
new file mode 100644
index 00000000000..f67ba60a2ac
--- /dev/null
+++ b/arch/sh/include/asm/parport.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+#ifndef __ASM_SH_PARPORT_H
+#define __ASM_SH_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* __ASM_SH_PARPORT_H */
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
new file mode 100644
index 00000000000..df1d383e18a
--- /dev/null
+++ b/arch/sh/include/asm/pci.h
@@ -0,0 +1,144 @@
+#ifndef __ASM_SH_PCI_H
+#define __ASM_SH_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#define pcibios_assign_all_busses()	1
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * A board can define one or more PCI channels that represent built-in (or
+ * external) PCI controllers.
+ */
+struct pci_channel {
+	struct pci_ops *pci_ops;
+	struct resource *io_resource;
+	struct resource *mem_resource;
+	int first_devfn;
+	int last_devfn;
+};
+
+/*
+ * Each board initializes this array and terminates it with a NULL entry.
+ */
+extern struct pci_channel board_pci_channels[];
+
+#define PCIBIOS_MIN_IO		board_pci_channels->io_resource->start
+#define PCIBIOS_MIN_MEM		board_pci_channels->mem_resource->start
+
+/*
+ * I/O routine helpers
+ */
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define PCI_IO_AREA		0xFE400000
+#define PCI_IO_SIZE		0x00400000
+#elif defined(CONFIG_CPU_SH5)
+extern unsigned long PCI_IO_AREA;
+#define PCI_IO_SIZE		0x00010000
+#else
+#define PCI_IO_AREA		0xFE240000
+#define PCI_IO_SIZE		0x00040000
+#endif
+
+#define PCI_MEM_SIZE		0x01000000
+
+#define SH4_PCIIOBR_MASK	0xFFFC0000
+#define pci_ioaddr(addr)	(PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK))
+
+#if defined(CONFIG_PCI)
+#define is_pci_ioaddr(port)		\
+	(((port) >= PCIBIOS_MIN_IO) &&	\
+	 ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE)))
+#define is_pci_memaddr(port)		\
+	(((port) >= PCIBIOS_MIN_MEM) &&	\
+	 ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE)))
+#else
+#define is_pci_ioaddr(port)	(0)
+#define is_pci_memaddr(port)	(0)
+#endif
+
+struct pci_dev;
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ * SuperH has everything mapped statically like x86.
+ */
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+/* pci_unmap_{single,page} being a nop depends upon the
+ * configuration.
+ */
+#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+#else
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+#endif
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+/* Board-specific fixup routines. */
+void pcibios_fixup(void);
+int pcibios_init_platform(void);
+int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
+
+#ifdef CONFIG_PCI_AUTO
+int pciauto_assign_resources(int busno, struct pci_channel *hose);
+#endif
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* generic DMA-mapping stuff */
+#include <asm-generic/pci-dma-compat.h>
+
+#endif /* __ASM_SH_PCI_H */
+
diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h
new file mode 100644
index 00000000000..4db4b39a439
--- /dev/null
+++ b/arch/sh/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SH_PERCPU
+#define __ARCH_SH_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SH_PERCPU */
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
new file mode 100644
index 00000000000..84dd2db7104
--- /dev/null
+++ b/arch/sh/include/asm/pgalloc.h
@@ -0,0 +1,96 @@
+#ifndef __ASM_SH_PGALLOC_H
+#define __ASM_SH_PGALLOC_H
+
+#include <linux/quicklist.h>
+#include <asm/page.h>
+
+#define QUICK_PGD 0	/* We preserve special mappings over free */
+#define QUICK_PT 1	/* Other page table pages that are zero on free */
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void pgd_ctor(void *x)
+{
+	pgd_t *pgd = x;
+
+	memcpy(pgd + USER_PTRS_PER_PGD,
+	       swapper_pg_dir + USER_PTRS_PER_PGD,
+	       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
+/*
+ * Allocate and free page tables.
+ */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(QUICK_PGD, NULL, pgd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+	if (!pg)
+		return NULL;
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(QUICK_PT, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	quicklist_free_page(QUICK_PT, NULL, pte);
+}
+
+#define __pte_free_tlb(tlb,pte)				\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), (pte));			\
+} while (0)
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+
+#define pmd_free(mm, x)			do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(QUICK_PGD, NULL, 25, 16);
+	quicklist_trim(QUICK_PT, NULL, 25, 16);
+}
+
+#endif /* __ASM_SH_PGALLOC_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
new file mode 100644
index 00000000000..a4a8f8b9346
--- /dev/null
+++ b/arch/sh/include/asm/pgtable.h
@@ -0,0 +1,152 @@
+/*
+ * This file contains the functions and defines necessary to modify and
+ * use the SuperH page table tree.
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ */
+#ifndef __ASM_SH_PGTABLE_H
+#define __ASM_SH_PGTABLE_H
+
+#include <asm-generic/pgtable-nopmd.h>
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/addrspace.h>
+#include <asm/fixmap.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Effective and physical address definitions, to aid with sign
+ * extension.
+ */
+#define NEFF		32
+#define	NEFF_SIGN	(1LL << (NEFF - 1))
+#define	NEFF_MASK	(-1LL << NEFF)
+
+#ifdef CONFIG_29BIT
+#define NPHYS		29
+#else
+#define NPHYS		32
+#endif
+
+#define	NPHYS_SIGN	(1LL << (NPHYS - 1))
+#define	NPHYS_MASK	(-1LL << NPHYS)
+
+/*
+ * traditional two-level paging structure
+ */
+/* PTE bits */
+#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64)
+# define PTE_MAGNITUDE	3	/* 64-bit PTEs on extended mode SH-X2 TLB */
+#else
+# define PTE_MAGNITUDE	2	/* 32-bit PTEs */
+#endif
+#define PTE_SHIFT	PAGE_SHIFT
+#define PTE_BITS	(PTE_SHIFT - PTE_MAGNITUDE)
+
+/* PGD bits */
+#define PGDIR_SHIFT	(PTE_SHIFT + PTE_BITS)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* Entries per level */
+#define PTRS_PER_PTE	(PAGE_SIZE / (1 << PTE_MAGNITUDE))
+#define PTRS_PER_PGD	(PAGE_SIZE / sizeof(pgd_t))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#ifdef CONFIG_32BIT
+#define PHYS_ADDR_MASK		0xffffffff
+#else
+#define PHYS_ADDR_MASK		0x1fffffff
+#endif
+
+#define PTE_PHYS_MASK		(PHYS_ADDR_MASK & PAGE_MASK)
+
+#ifdef CONFIG_SUPERH32
+#define VMALLOC_START	(P3SEG)
+#else
+#define VMALLOC_START	(0xf0000000)
+#endif
+#define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+
+#if defined(CONFIG_SUPERH32)
+#include <asm/pgtable_32.h>
+#else
+#include <asm/pgtable_64.h>
+#endif
+
+/*
+ * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
+ * protection for execute, and considers it the same as a read. Also, write
+ * permission implies read permission. This is the closest we can get..
+ *
+ * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme,
+ * not only supporting separate execute, read, and write bits, but having
+ * completely separate permission bits for user and kernel space.
+ */
+	 /*xwr*/
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_EXECREAD
+#define __P101	PAGE_EXECREAD
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_WRITEONLY
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_EXECREAD
+#define __S101	PAGE_EXECREAD
+#define __S110	PAGE_RWX
+#define __S111	PAGE_RWX
+
+typedef pte_t *pte_addr_t;
+
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define pte_pfn(x)		((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
+	defined(CONFIG_SH7705_CACHE_32KB))
+struct mm_struct;
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+#endif
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct * vma,
+			     unsigned long address, pte_t pte);
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init(void);
+extern void page_table_range_init(unsigned long start, unsigned long end,
+				  pgd_t *pgd);
+
+#include <asm-generic/pgtable.h>
+
+#endif /* __ASM_SH_PGTABLE_H */
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
new file mode 100644
index 00000000000..72ea209195b
--- /dev/null
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -0,0 +1,479 @@
+#ifndef __ASM_SH_PGTABLE_32_H
+#define __ASM_SH_PGTABLE_32_H
+
+/*
+ * Linux PTEL encoding.
+ *
+ * Hardware and software bit definitions for the PTEL value (see below for
+ * notes on SH-X2 MMUs and 64-bit PTEs):
+ *
+ * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
+ *
+ * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
+ *   hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
+ *   which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
+ *
+ *   In order to keep this relatively clean, do not use these for defining
+ *   SH-3 specific flags until all of the other unused bits have been
+ *   exhausted.
+ *
+ * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
+ *
+ * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
+ *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
+ *
+ * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
+ *   and timing control which (together with bit 0) are moved into the
+ *   old-style PTEA on the parts that support it.
+ *
+ * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day.
+ *
+ * SH-X2 MMUs and extended PTEs
+ *
+ * SH-X2 supports an extended mode TLB with split data arrays due to the
+ * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
+ * SZ bit placeholders still exist in data array 1, but are implemented as
+ * reserved bits, with the real logic existing in data array 2.
+ *
+ * The downside to this is that we can no longer fit everything in to a 32-bit
+ * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
+ * side, this gives us quite a few spare bits to play with for future usage.
+ */
+/* Legacy and compat mode bits */
+#define	_PAGE_WT	0x001		/* WT-bit on SH-4, 0 on SH-3 */
+#define _PAGE_HW_SHARED	0x002		/* SH-bit  : shared among processes */
+#define _PAGE_DIRTY	0x004		/* D-bit   : page changed */
+#define _PAGE_CACHABLE	0x008		/* C-bit   : cachable */
+#define _PAGE_SZ0	0x010		/* SZ0-bit : Size of page */
+#define _PAGE_RW	0x020		/* PR0-bit : write access allowed */
+#define _PAGE_USER	0x040		/* PR1-bit : user space access allowed*/
+#define _PAGE_SZ1	0x080		/* SZ1-bit : Size of page (on SH-4) */
+#define _PAGE_PRESENT	0x100		/* V-bit   : page is valid */
+#define _PAGE_PROTNONE	0x200		/* software: if not present  */
+#define _PAGE_ACCESSED	0x400		/* software: page referenced */
+#define _PAGE_FILE	_PAGE_WT	/* software: pagecache or swap? */
+
+#define _PAGE_SZ_MASK	(_PAGE_SZ0 | _PAGE_SZ1)
+#define _PAGE_PR_MASK	(_PAGE_RW | _PAGE_USER)
+
+/* Extended mode bits */
+#define _PAGE_EXT_ESZ0		0x0010	/* ESZ0-bit: Size of page */
+#define _PAGE_EXT_ESZ1		0x0020	/* ESZ1-bit: Size of page */
+#define _PAGE_EXT_ESZ2		0x0040	/* ESZ2-bit: Size of page */
+#define _PAGE_EXT_ESZ3		0x0080	/* ESZ3-bit: Size of page */
+
+#define _PAGE_EXT_USER_EXEC	0x0100	/* EPR0-bit: User space executable */
+#define _PAGE_EXT_USER_WRITE	0x0200	/* EPR1-bit: User space writable */
+#define _PAGE_EXT_USER_READ	0x0400	/* EPR2-bit: User space readable */
+
+#define _PAGE_EXT_KERN_EXEC	0x0800	/* EPR3-bit: Kernel space executable */
+#define _PAGE_EXT_KERN_WRITE	0x1000	/* EPR4-bit: Kernel space writable */
+#define _PAGE_EXT_KERN_READ	0x2000	/* EPR5-bit: Kernel space readable */
+
+/* Wrapper for extended mode pgprot twiddling */
+#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
+
+/* software: moves to PTEA.TC (Timing Control) */
+#define _PAGE_PCC_AREA5	0x00000000	/* use BSC registers for area5 */
+#define _PAGE_PCC_AREA6	0x80000000	/* use BSC registers for area6 */
+
+/* software: moves to PTEA.SA[2:0] (Space Attributes) */
+#define _PAGE_PCC_IODYN 0x00000001	/* IO space, dynamically sized bus */
+#define _PAGE_PCC_IO8	0x20000000	/* IO space, 8 bit bus */
+#define _PAGE_PCC_IO16	0x20000001	/* IO space, 16 bit bus */
+#define _PAGE_PCC_COM8	0x40000000	/* Common Memory space, 8 bit bus */
+#define _PAGE_PCC_COM16	0x40000001	/* Common Memory space, 16 bit bus */
+#define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
+#define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
+
+/* Mask which drops unused bits from the PTEL value */
+#if defined(CONFIG_CPU_SH3)
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED| \
+				 _PAGE_FILE	| _PAGE_SZ1	| \
+				 _PAGE_HW_SHARED)
+#elif defined(CONFIG_X2TLB)
+/* Get rid of the legacy PR/SZ bits when using extended mode */
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | \
+				 _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK)
+#else
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
+#endif
+
+#define _PAGE_FLAGS_HARDWARE_MASK	(PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
+
+/* Hardware flags, page size encoding */
+#if !defined(CONFIG_MMU)
+# define _PAGE_FLAGS_HARD	0ULL
+#elif defined(CONFIG_X2TLB)
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ0)
+# elif defined(CONFIG_PAGE_SIZE_8KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ1)
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ2)
+# endif
+#else
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ0
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ1
+# endif
+#endif
+
+#if defined(CONFIG_X2TLB)
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ3)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
+# endif
+#else
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_SZ1)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
+# endif
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
+#endif
+
+#define _PAGE_CHG_MASK \
+	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ  | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_EXECREAD	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
+					   _PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_USER_EXEC | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_COPY	PAGE_EXECREAD
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_WRITEONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_RWX	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_READ  | \
+					   _PAGE_EXT_KERN_EXEC  | \
+					   _PAGE_EXT_USER_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_EXEC))
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC) \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
+
+#elif defined(CONFIG_MMU) /* SH-X TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+				 _PAGE_CACHABLE | _PAGE_ACCESSED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_EXECREAD	PAGE_READONLY
+#define PAGE_RWX	PAGE_SHARED
+#define PAGE_WRITEONLY	PAGE_SHARED
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
+#else /* no mmu */
+#define PAGE_NONE		__pgprot(0)
+#define PAGE_SHARED		__pgprot(0)
+#define PAGE_COPY		__pgprot(0)
+#define PAGE_EXECREAD		__pgprot(0)
+#define PAGE_RWX		__pgprot(0)
+#define PAGE_READONLY		__pgprot(0)
+#define PAGE_WRITEONLY		__pgprot(0)
+#define PAGE_KERNEL		__pgprot(0)
+#define PAGE_KERNEL_NOCACHE	__pgprot(0)
+#define PAGE_KERNEL_RO		__pgprot(0)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+				__pgprot(0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#ifdef CONFIG_X2TLB
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+#else
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#endif
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define pfn_pte(pfn, prot) \
+	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) \
+	__pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pte_none(x)		(!pte_val(x))
+#define pte_present(x)		((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x))
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
+
+#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
+#define pte_page(x)	pfn_to_page(pte_pfn(x))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_not_present(pte)	(!((pte).pte_low & _PAGE_PRESENT))
+#define pte_dirty(pte)		((pte).pte_low & _PAGE_DIRTY)
+#define pte_young(pte)		((pte).pte_low & _PAGE_ACCESSED)
+#define pte_file(pte)		((pte).pte_low & _PAGE_FILE)
+#define pte_special(pte)	(0)
+
+#ifdef CONFIG_X2TLB
+#define pte_write(pte)		((pte).pte_high & _PAGE_EXT_USER_WRITE)
+#else
+#define pte_write(pte)		((pte).pte_low & _PAGE_RW)
+#endif
+
+#define PTE_BIT_FUNC(h,fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
+
+#ifdef CONFIG_X2TLB
+/*
+ * We cheat a bit in the SH-X2 TLB case. As the permission bits are
+ * individually toggled (and user permissions are entirely decoupled from
+ * kernel permissions), we attempt to couple them a bit more sanely here.
+ */
+PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE);
+PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
+PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
+#else
+PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
+PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
+PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
+#endif
+
+PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+#define pgprot_writecombine(prot) \
+	__pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+#define pgprot_noncached	 pgprot_writecombine
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte_low &= _PAGE_CHG_MASK;
+	pte.pte_low |= pgprot_val(newprot);
+
+#ifdef CONFIG_X2TLB
+	pte.pte_high |= pgprot_val(newprot) >> 32;
+#endif
+
+	return pte;
+}
+
+#define pmd_page_vaddr(pmd)	((unsigned long)pmd_val(pmd))
+#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address)		pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address)	pte_offset_kernel(dir, address)
+
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#ifdef CONFIG_X2TLB
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
+	       &(e), (e).pte_high, (e).pte_low)
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
+#else
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+#endif
+
+/*
+ * Encode and de-code a swap entry
+ *
+ * Constraints:
+ *	_PAGE_FILE at bit 0
+ *	_PAGE_PRESENT at bit 8
+ *	_PAGE_PROTNONE at bit 9
+ *
+ * For the normal case, we encode the swap type into bits 0:7 and the
+ * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
+ * preserved bits in the low 32-bits and use the upper 32 as the swap
+ * offset (along with a 5-bit type), following the same approach as x86
+ * PAE. This keeps the logic quite simple, and allows for a full 32
+ * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
+ * in the pte_low case.
+ *
+ * As is evident by the Alpha code, if we ever get a 64-bit unsigned
+ * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
+ * much cleaner..
+ *
+ * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
+ *       and _PAGE_PROTNONE bits
+ */
+#ifdef CONFIG_X2TLB
+#define __swp_type(x)			((x).val & 0x1f)
+#define __swp_offset(x)			((x).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t){ (type) | (offset) << 5})
+#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x)		((pte_t){ 0, (x).val })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define pte_to_pgoff(pte)		((pte).pte_high)
+#define pgoff_to_pte(off)		((pte_t) { _PAGE_FILE, (off) })
+
+#define PTE_FILE_MAX_BITS		32
+#else
+#define __swp_type(x)			((x).val & 0xff)
+#define __swp_offset(x)			((x).val >> 10)
+#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) <<10})
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 1 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 1 })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 1)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 1) | _PAGE_FILE })
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
new file mode 100644
index 00000000000..c78990cda55
--- /dev/null
+++ b/arch/sh/include/asm/pgtable_64.h
@@ -0,0 +1,314 @@
+#ifndef __ASM_SH_PGTABLE_64_H
+#define __ASM_SH_PGTABLE_64_H
+
+/*
+ * include/asm-sh/pgtable_64.h
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the SuperH page table tree.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ * Copyright (C) 2003, 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+/*
+ * Error outputs.
+ */
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Table setting routines. Used within arch/mm only.
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	unsigned long long x = ((unsigned long long) pteval.pte_low);
+	unsigned long long *xp = (unsigned long long *) pteptr;
+	/*
+	 * Sign-extend based on NPHYS.
+	 */
+	*(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x;
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
+{
+	pmd_val(*pmdp) = (unsigned long) ptep;
+}
+
+/*
+ * PGD defines. Top level.
+ */
+
+/* To find an entry in a generic PGD. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define __pgd_offset(address) pgd_index(address)
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/* To find an entry in a kernel PGD. */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * PMD level access routines. Same notes as above.
+ */
+#define _PMD_EMPTY		0x0
+/* Either the PMD is empty or present, it's not paged out */
+#define pmd_present(pmd_entry)	(pmd_val(pmd_entry) & _PAGE_PRESENT)
+#define pmd_clear(pmd_entry_p)	(set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY)))
+#define pmd_none(pmd_entry)	(pmd_val((pmd_entry)) == _PMD_EMPTY)
+#define pmd_bad(pmd_entry)	((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pmd_page_vaddr(pmd_entry) \
+	((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK))
+
+#define pmd_page(pmd) \
+	(virt_to_page(pmd_val(pmd)))
+
+/* PMD to PTE dereferencing */
+#define pte_index(address) \
+		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, addr) \
+		((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#ifndef __ASSEMBLY__
+#define IOBASE_VADDR	0xff000000
+#define IOBASE_END	0xffffffff
+
+/*
+ * PTEL coherent flags.
+ * See Chapter 17 ST50 CPU Core Volume 1, Architecture.
+ */
+/* The bits that are required in the SH-5 TLB are placed in the h/w-defined
+   positions, to avoid expensive bit shuffling on every refill.  The remaining
+   bits are used for s/w purposes and masked out on each refill.
+
+   Note, the PTE slots are used to hold data of type swp_entry_t when a page is
+   swapped out.  Only the _PAGE_PRESENT flag is significant when the page is
+   swapped out, and it must be placed so that it doesn't overlap either the
+   type or offset fields of swp_entry_t.  For x86, offset is at [31:8] and type
+   at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t.  This
+   scheme doesn't map to SH-5 because bit [0] controls cacheability.  So bit
+   [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split
+   into 2 pieces.  That is handled by SWP_ENTRY and SWP_TYPE below. */
+#define _PAGE_WT	0x001  /* CB0: if cacheable, 1->write-thru, 0->write-back */
+#define _PAGE_DEVICE	0x001  /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */
+#define _PAGE_CACHABLE	0x002  /* CB1: uncachable/cachable */
+#define _PAGE_PRESENT	0x004  /* software: page referenced */
+#define _PAGE_FILE	0x004  /* software: only when !present */
+#define _PAGE_SIZE0	0x008  /* SZ0-bit : size of page */
+#define _PAGE_SIZE1	0x010  /* SZ1-bit : size of page */
+#define _PAGE_SHARED	0x020  /* software: reflects PTEH's SH */
+#define _PAGE_READ	0x040  /* PR0-bit : read access allowed */
+#define _PAGE_EXECUTE	0x080  /* PR1-bit : execute access allowed */
+#define _PAGE_WRITE	0x100  /* PR2-bit : write access allowed */
+#define _PAGE_USER	0x200  /* PR3-bit : user space access allowed */
+#define _PAGE_DIRTY	0x400  /* software: page accessed in write */
+#define _PAGE_ACCESSED	0x800  /* software: page referenced */
+
+/* Mask which drops software flags */
+#define _PAGE_FLAGS_HARDWARE_MASK	0xfffffffffffff3dbLL
+
+/*
+ * HugeTLB support
+ */
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE	(_PAGE_SIZE0)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define _PAGE_SZHUGE	(_PAGE_SIZE1)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define _PAGE_SZHUGE	(_PAGE_SIZE0 | _PAGE_SIZE1)
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE	(0)
+#endif
+
+/*
+ * Default flags for a Kernel page.
+ * This is fundametally also SHARED because the main use of this define
+ * (other than for PGD/PMD entries) is for the VMALLOC pool which is
+ * contextless.
+ *
+ * _PAGE_EXECUTE is required for modules
+ *
+ */
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+			 _PAGE_EXECUTE | \
+			 _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \
+			 _PAGE_SHARED)
+
+/* Default flags for a User page */
+#define _PAGE_TABLE	(_KERNPG_TABLE | _PAGE_USER)
+
+#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * We have full permissions (Read/Write/Execute/Shared).
+ */
+#define _PAGE_COMMON	(_PAGE_PRESENT | _PAGE_USER | \
+			 _PAGE_CACHABLE | _PAGE_ACCESSED)
+
+#define PAGE_NONE	__pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_SHARED)
+#define PAGE_EXECREAD	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE)
+
+/*
+ * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default
+ * protection mode for the stack.
+ */
+#define PAGE_COPY	PAGE_EXECREAD
+
+#define PAGE_READONLY	__pgprot(_PAGE_COMMON | _PAGE_READ)
+#define PAGE_WRITEONLY	__pgprot(_PAGE_COMMON | _PAGE_WRITE)
+#define PAGE_RWX	__pgprot(_PAGE_COMMON | _PAGE_READ | \
+				 _PAGE_WRITE | _PAGE_EXECUTE)
+#define PAGE_KERNEL	__pgprot(_KERNPG_TABLE)
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_EXECUTE | _PAGE_ACCESSED | \
+				 _PAGE_DIRTY | _PAGE_SHARED)
+
+/* Make it a device mapping for maximum safety (e.g. for mapping device
+   registers into user-space via /dev/map).  */
+#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE)
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+/*
+ * Handling allocation failures during page table setup.
+ */
+extern void __handle_bad_pmd_kernel(pmd_t * pmd);
+#define __handle_bad_pmd(x)	__handle_bad_pmd_kernel(x)
+
+/*
+ * PTE level access routines.
+ *
+ * Note1:
+ * It's the tree walk leaf. This is physical address to be stored.
+ *
+ * Note 2:
+ * Regarding the choice of _PTE_EMPTY:
+
+   We must choose a bit pattern that cannot be valid, whether or not the page
+   is present.  bit[2]==1 => present, bit[2]==0 => swapped out.  If swapped
+   out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is
+   left for us to select.  If we force bit[7]==0 when swapped out, we could use
+   the combination bit[7,2]=2'b10 to indicate an empty PTE.  Alternatively, if
+   we force bit[7]==1 when swapped out, we can use all zeroes to indicate
+   empty.  This is convenient, because the page tables get cleared to zero
+   when they are allocated.
+
+ */
+#define _PTE_EMPTY	0x0
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	(set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY)))
+#define pte_none(x)	(pte_val(x) == _PTE_EMPTY)
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page
+ * addresses:
+ */
+
+/*
+ * Given a PTE, return the index of the mem_map[] entry corresponding
+ * to the page frame the PTE. Get the absolute physical address, make
+ * a relative physical address and translate it to an index.
+ */
+#define pte_pagenr(x)		(((unsigned long) (pte_val(x)) - \
+				 __MEMORY_START) >> PAGE_SHIFT)
+
+/*
+ * Given a PTE, return the "struct page *".
+ */
+#define pte_page(x)		(mem_map + pte_pagenr(x))
+
+/*
+ * Return number of (down rounded) MB corresponding to x pages.
+ */
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+static inline int pte_dirty(pte_t pte)  { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)  { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)   { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_write(pte_t pte)  { return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_special(pte_t pte){ return 0; }
+
+static inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
+static inline pte_t pte_mkhuge(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page,pgprot)							\
+({										\
+	pte_t __pte;								\
+										\
+	set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | 		\
+		__MEMORY_START | pgprot_val((pgprot))));			\
+	__pte;									\
+})
+
+/*
+ * This takes a (absolute) physical page address that is used
+ * by the remapping functions
+ */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; })
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
+
+/* Encode and decode a swap entry */
+#define __swp_type(x)			(((x).val & 3) + (((x).val >> 1) & 0x3c))
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS		29
+#define pte_to_pgoff(pte)		(pte_val(pte))
+#define pgoff_to_pte(off)		((pte_t) { (off) | _PAGE_FILE })
+
+#endif /* !__ASSEMBLY__ */
+
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#endif /* __ASM_SH_PGTABLE_64_H */
diff --git a/arch/sh/include/asm/pm.h b/arch/sh/include/asm/pm.h
new file mode 100644
index 00000000000..56fdbd6b1c9
--- /dev/null
+++ b/arch/sh/include/asm/pm.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ */
+#ifndef __ASM_SH_PM_H
+#define __ASM_SH_PM_H
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+void pm_enter(void);
+
+#endif
diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h
new file mode 100644
index 00000000000..c98509d3149
--- /dev/null
+++ b/arch/sh/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h
new file mode 100644
index 00000000000..4eeb723aee7
--- /dev/null
+++ b/arch/sh/include/asm/posix_types.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_SUPERH32
+#  include "posix_types_32.h"
+# else
+#  include "posix_types_64.h"
+# endif
+#else
+# ifdef __SH5__
+#  include "posix_types_64.h"
+# else
+#  include "posix_types_32.h"
+# endif
+#endif /* __KERNEL__ */
diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
new file mode 100644
index 00000000000..0a3d2f54ab2
--- /dev/null
+++ b/arch/sh/include/asm/posix_types_32.h
@@ -0,0 +1,122 @@
+#ifndef __ASM_SH_POSIX_TYPES_H
+#define __ASM_SH_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{ 
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
new file mode 100644
index 00000000000..0620317a6f0
--- /dev/null
+++ b/arch/sh/include/asm/posix_types_64.h
@@ -0,0 +1,131 @@
+#ifndef __ASM_SH64_POSIX_TYPES_H
+#define __ASM_SH64_POSIX_TYPES_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/posix_types.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef long unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_SH64_POSIX_TYPES_H */
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
new file mode 100644
index 00000000000..15d9f92ca38
--- /dev/null
+++ b/arch/sh/include/asm/processor.h
@@ -0,0 +1,66 @@
+#ifndef __ASM_SH_PROCESSOR_H
+#define __ASM_SH_PROCESSOR_H
+
+#include <asm/cpu-features.h>
+#include <asm/segment.h>
+
+#ifndef __ASSEMBLY__
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *
+ *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
+ *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
+ *  for parsing the subtype in get_cpu_subtype().
+ */
+enum cpu_type {
+	/* SH-2 types */
+	CPU_SH7619,
+
+	/* SH-2A types */
+	CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
+
+	/* SH-3 types */
+	CPU_SH7705, CPU_SH7706, CPU_SH7707,
+	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
+	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
+	CPU_SH7720, CPU_SH7721, CPU_SH7729,
+
+	/* SH-4 types */
+	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
+	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
+
+	/* SH-4A types */
+	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+	CPU_SH7723, CPU_SHX3,
+
+	/* SH4AL-DSP types */
+	CPU_SH7343, CPU_SH7722, CPU_SH7366,
+
+	/* SH-5 types */
+        CPU_SH5_101, CPU_SH5_103,
+
+	/* Unknown subtype */
+	CPU_SH_NONE
+};
+
+/* Forward decl */
+struct sh_cpuinfo;
+
+/* arch/sh/kernel/setup.c */
+const char *get_cpu_subtype(struct sh_cpuinfo *c);
+
+#ifdef CONFIG_VSYSCALL
+int vsyscall_init(void);
+#else
+#define vsyscall_init() do { } while (0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SUPERH32
+# include "processor_32.h"
+#else
+# include "processor_64.h"
+#endif
+
+#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
new file mode 100644
index 00000000000..0dadd75bd93
--- /dev/null
+++ b/arch/sh/include/asm/processor_32.h
@@ -0,0 +1,216 @@
+/*
+ * include/asm-sh/processor.h
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2002, 2003  Paul Mundt
+ */
+
+#ifndef __ASM_SH_PROCESSOR_32_H
+#define __ASM_SH_PROCESSOR_32_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
+
+/* Core Processor Version Register */
+#define CCN_PVR		0xff000030
+#define CCN_CVR		0xff000040
+#define CCN_PRR		0xff000044
+
+struct sh_cpuinfo {
+	unsigned int type;
+	int cut_major, cut_minor;
+	unsigned long loops_per_jiffy;
+	unsigned long asid_cache;
+
+	struct cache_info icache;	/* Primary I-cache */
+	struct cache_info dcache;	/* Primary D-cache */
+	struct cache_info scache;	/* Secondary cache */
+
+	unsigned long flags;
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+/*
+ * User space process size: 2GB.
+ *
+ * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
+ */
+#define TASK_SIZE	0x7c000000UL
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ */
+#define SR_DSP		0x00001000
+#define SR_IMASK	0x000000f0
+#define SR_FD		0x00008000
+
+/*
+ * FPU structure and data
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	long status; /* software status information */
+};
+
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+
+union sh_fpu_union {
+	struct sh_fpu_hard_struct hard;
+	struct sh_fpu_soft_struct soft;
+};
+
+struct thread_struct {
+	/* Saved registers when thread is descheduled */
+	unsigned long sp;
+	unsigned long pc;
+
+	/* Hardware debugging registers */
+	unsigned long ubc_pc;
+
+	/* floating point info */
+	union sh_fpu_union fpu;
+};
+
+/* Count of active tasks with UBC settings */
+extern int ubc_usercnt;
+
+#define INIT_THREAD  {						\
+	.sp = sizeof(init_stack) + (long) &init_stack,		\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp)	 \
+	set_fs(USER_DS);			 \
+	regs->pr = 0;				 \
+	regs->sr = SR_FD;	/* User mode. */ \
+	regs->pc = new_pc;			 \
+	regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while(0)
+#define release_segments(mm)	do { } while(0)
+
+/*
+ * FPU lazy state save handling.
+ */
+
+static __inline__ void disable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "or	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static __inline__ void enable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "and	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
+#define FPSCR_INIT  0x00080000
+
+#define	FPSCR_CAUSE_MASK	0x0001f000	/* Cause bits */
+#define	FPSCR_FLAG_MASK		0x0000007c	/* Flag bits */
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+		struct pt_regs *regs);
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
+
+#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
+#define cpu_relax()	barrier()
+
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
+    defined(CONFIG_CPU_SH4)
+#define PREFETCH_STRIDE		L1_CACHE_BYTES
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+static inline void prefetch(void *x)
+{
+	__asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+}
+
+#define prefetchw(x)	prefetch(x)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
new file mode 100644
index 00000000000..770d5169983
--- /dev/null
+++ b/arch/sh/include/asm/processor_64.h
@@ -0,0 +1,275 @@
+#ifndef __ASM_SH_PROCESSOR_64_H
+#define __ASM_SH_PROCESSOR_64_H
+
+/*
+ * include/asm-sh/processor_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>
+#include <cpu/registers.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ \
+void *pc; \
+unsigned long long __dummy = 0; \
+__asm__("gettr	tr0, %1\n\t" \
+	"pta	4, tr0\n\t" \
+	"gettr	tr0, %0\n\t" \
+	"ptabs	%1, tr0\n\t"	\
+	:"=r" (pc), "=r" (__dummy) \
+	: "1" (__dummy)); \
+pc; })
+
+/*
+ * TLB information structure
+ *
+ * Defined for both I and D tlb, per-processor.
+ */
+struct tlb_info {
+	unsigned long long next;
+	unsigned long long first;
+	unsigned long long last;
+
+	unsigned int entries;
+	unsigned int step;
+
+	unsigned long flags;
+};
+
+struct sh_cpuinfo {
+	enum cpu_type type;
+	unsigned long loops_per_jiffy;
+	unsigned long asid_cache;
+
+	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+
+	/* Cache info */
+	struct cache_info icache;
+	struct cache_info dcache;
+	struct cache_info scache;
+
+	/* TLB info */
+	struct tlb_info itlb;
+	struct tlb_info dtlb;
+
+	unsigned long flags;
+};
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+#endif
+
+/*
+ * User space process size: 2GB - 4k.
+ */
+#define TASK_SIZE	0x7ffff000UL
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ *
+ * STEP-bit:
+ *     Single step bit
+ *
+ */
+#if defined(CONFIG_SH64_SR_WATCH)
+#define SR_MMU   0x84000000
+#else
+#define SR_MMU   0x80000000
+#endif
+
+#define SR_IMASK 0x000000f0
+#define SR_FD    0x00008000
+#define SR_SSTEP 0x08000000
+
+#ifndef __ASSEMBLY__
+
+/*
+ * FPU structure and data : require 8-byte alignment as we need to access it
+   with fld.p, fst.p
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[64];
+	unsigned int fpscr;
+	/* long status; * software status information */
+};
+
+#if 0
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long long fp_regs[32];
+	unsigned int fpscr;
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+#endif
+
+union sh_fpu_union {
+	struct sh_fpu_hard_struct hard;
+	/* 'hard' itself only produces 32 bit alignment, yet we need
+	   to access it using 64 bit load/store as well. */
+	unsigned long long alignment_dummy;
+};
+
+struct thread_struct {
+	unsigned long sp;
+	unsigned long pc;
+	/* This stores the address of the pt_regs built during a context
+	   switch, or of the register save area built for a kernel mode
+	   exception.  It is used for backtracing the stack of a sleeping task
+	   or one that traps in kernel mode. */
+        struct pt_regs *kregs;
+	/* This stores the address of the pt_regs constructed on entry from
+	   user mode.  It is a fixed value over the lifetime of a process, or
+	   NULL for a kernel thread. */
+	struct pt_regs *uregs;
+
+	unsigned long trap_no, error_code;
+	unsigned long address;
+	/* Hardware debugging registers may come here */
+
+	/* floating point info */
+	union sh_fpu_union fpu;
+};
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
+
+extern  struct pt_regs fake_swapper_regs;
+
+#define INIT_THREAD  {				\
+	.sp		= sizeof(init_stack) +	\
+			  (long) &init_stack,	\
+	.pc		= 0,			\
+        .kregs		= &fake_swapper_regs,	\
+	.uregs	        = NULL,			\
+	.trap_no	= 0,			\
+	.error_code	= 0,			\
+	.address	= 0,			\
+	.fpu		= { { { 0, } }, }	\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define SR_USER (SR_MMU | SR_FD)
+
+#define start_thread(regs, new_pc, new_sp)			\
+	set_fs(USER_DS);					\
+	regs->sr = SR_USER;	/* User mode. */		\
+	regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
+	regs->pc |= 1;		/* Set SHmedia ! */		\
+	regs->regs[18] = 0;					\
+	regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while (0)
+#define release_segments(mm)	do { } while (0)
+#define forget_segments()	do { } while (0)
+#define prepare_to_copy(tsk)	do { } while (0)
+/*
+ * FPU lazy state save handling.
+ */
+
+static inline void disable_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static inline void enable_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Round to nearest, no exceptions on inexact, overflow, underflow,
+   zero-divide, invalid.  Configure option for whether to flush denorms to
+   zero, or except if a denorm is encountered.  */
+#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
+#define FPSCR_INIT  0x00040000
+#else
+#define FPSCR_INIT  0x00000000
+#endif
+
+#ifdef CONFIG_SH_FPU
+/* Initialise the FP state of a task */
+void fpinit(struct sh_fpu_hard_struct *fpregs);
+#else
+#define fpinit(fpregs)	do { } while (0)
+#endif
+
+extern struct task_struct *last_task_used_math;
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+
+#define cpu_relax()	barrier()
+
+#endif	/* __ASSEMBLY__ */
+#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
new file mode 100644
index 00000000000..b86aeabba61
--- /dev/null
+++ b/arch/sh/include/asm/ptrace.h
@@ -0,0 +1,139 @@
+#ifndef __ASM_SH_PTRACE_H
+#define __ASM_SH_PTRACE_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ *
+ */
+#if defined(__SH5__)
+struct pt_regs {
+	unsigned long long pc;
+	unsigned long long sr;
+	unsigned long long syscall_nr;
+	unsigned long long regs[63];
+	unsigned long long tregs[8];
+	unsigned long long pad[2];
+};
+#else
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *	 0 - 15 are integer registers
+ *	17 - 22 are control/special registers
+ *	24 - 39 fp registers
+ *	40 - 47 xd registers
+ *	48 -    fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *	16 --- program counter (PC)
+ *	22 --- syscall #
+ *	23 --- floating point communication register
+ */
+#define REG_REG0	 0
+#define REG_REG15	15
+
+#define REG_PC		16
+
+#define REG_PR		17
+#define REG_SR		18
+#define REG_GBR		19
+#define REG_MACH	20
+#define REG_MACL	21
+
+#define REG_SYSCALL	22
+
+#define REG_FPREG0	23
+#define REG_FPREG15	38
+#define REG_XFREG0	39
+#define REG_XFREG15	54
+
+#define REG_FPSCR	55
+#define REG_FPUL	56
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long regs[16];
+	unsigned long pc;
+	unsigned long pr;
+	unsigned long sr;
+	unsigned long gbr;
+	unsigned long mach;
+	unsigned long macl;
+	long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+	unsigned long	a1;
+	unsigned long	a0g;
+	unsigned long	a1g;
+	unsigned long	m0;
+	unsigned long	m1;
+	unsigned long	a0;
+	unsigned long	x0;
+	unsigned long	x1;
+	unsigned long	y0;
+	unsigned long	y1;
+	unsigned long	dsr;
+	unsigned long	rs;
+	unsigned long	re;
+	unsigned long	mod;
+};
+
+#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+
+#define	PTRACE_GETDSPREGS	55
+#define	PTRACE_SETDSPREGS	56
+#endif
+
+#ifdef __KERNEL__
+#include <asm/addrspace.h>
+
+#define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
+#define instruction_pointer(regs)	((unsigned long)(regs)->pc)
+
+extern void show_regs(struct pt_regs *);
+
+/*
+ * These are defined as per linux/ptrace.h.
+ */
+struct task_struct;
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#ifdef CONFIG_SH_DSP
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+#else
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(unsigned long)) - 1)
+#endif
+
+static inline unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+#ifdef P2SEG
+	if (pc >= P2SEG && pc < P3SEG)
+		pc -= 0x20000000;
+#endif
+
+	return pc;
+}
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/asm/push-switch.h b/arch/sh/include/asm/push-switch.h
new file mode 100644
index 00000000000..4903f9e52dd
--- /dev/null
+++ b/arch/sh/include/asm/push-switch.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH_PUSH_SWITCH_H
+#define __ASM_SH_PUSH_SWITCH_H
+
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+struct push_switch {
+	/* switch state */
+	unsigned int		state:1;
+	/* debounce timer */
+	struct timer_list	debounce;
+	/* workqueue */
+	struct work_struct	work;
+	/* platform device, for workqueue handler */
+	struct platform_device	*pdev;
+};
+
+struct push_switch_platform_info {
+	/* IRQ handler */
+	irqreturn_t		(*irq_handler)(int irq, void *data);
+	/* Special IRQ flags */
+	unsigned int		irq_flags;
+	/* Bit location of switch */
+	unsigned int		bit;
+	/* Symbolic switch name */
+	const char		*name;
+};
+
+#endif /* __ASM_SH_PUSH_SWITCH_H */
diff --git a/arch/sh/include/asm/r7780rp.h b/arch/sh/include/asm/r7780rp.h
new file mode 100644
index 00000000000..306f7359f7d
--- /dev/null
+++ b/arch/sh/include/asm/r7780rp.h
@@ -0,0 +1,198 @@
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/* Box specific addresses.  */
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR          0xa4000000      /* FPGA */
+#define PA_SDPOW	(-1)
+
+#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_SMCR         (PA_BCR+0x0600) /* 2-wire Serial control */
+#define PA_SMSMADR      (PA_BCR+0x0602) /* 2-wire Serial Slave control */
+#define PA_SMMR         (PA_BCR+0x0604) /* 2-wire Serial Mode control */
+#define PA_SMSADR1      (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
+#define PA_SMTRDR1      (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
+#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR          (PA_BCR+0x0900) /*  */
+
+#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7780RP)
+#define PA_POFF		(-1)
+
+#define PA_BCR		0xa5000000	/* FPGA */
+#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
+#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
+#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
+#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
+#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
+#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
+#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
+#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
+#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
+#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
+#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
+#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
+#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
+#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
+#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
+#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
+#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
+#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
+#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
+#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
+#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
+#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
+#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
+#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
+#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
+#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
+#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
+#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
+#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
+#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
+#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
+#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
+#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
+#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
+#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
+#define PA_SMCR		(PA_BCR+0x0500)	/* 2-wire Serial control */
+#define PA_SMSMADR	(PA_BCR+0x0502)	/* 2-wire Serial Slave control */
+#define PA_SMMR		(PA_BCR+0x0504)	/* 2-wire Serial Mode control */
+#define PA_SMSADR1	(PA_BCR+0x0506)	/* 2-wire Serial Address1 control */
+#define PA_SMTRDR1	(PA_BCR+0x0546)	/* 2-wire Serial Data1 control */
+#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
+
+#define PA_AX88796L	0xa5800400	/* AX88796L Area */
+#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7785RP)
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SDPOW	(-1)
+
+#define	PA_PCISCR	(PA_BCR+0x0000)
+#define PA_IRLPRA	(PA_BCR+0x0002)
+#define	PA_IRLPRB	(PA_BCR+0x0004)
+#define	PA_IRLPRC	(PA_BCR+0x0006)
+#define	PA_IRLPRD	(PA_BCR+0x0008)
+#define IRLCNTR1	(PA_BCR+0x0010)
+#define	PA_IRLPRE	(PA_BCR+0x000a)
+#define	PA_IRLPRF	(PA_BCR+0x000c)
+#define	PA_EXIRLCR	(PA_BCR+0x000e)
+#define	PA_IRLMCR1	(PA_BCR+0x0010)
+#define	PA_IRLMCR2	(PA_BCR+0x0012)
+#define	PA_IRLSSR1	(PA_BCR+0x0014)
+#define	PA_IRLSSR2	(PA_BCR+0x0016)
+#define PA_CFTCR	(PA_BCR+0x0100)
+#define PA_CFPCR	(PA_BCR+0x0102)
+#define PA_PCICR	(PA_BCR+0x0110)
+#define PA_IVDRCTL	(PA_BCR+0x0112)
+#define PA_IVDRSR	(PA_BCR+0x0114)
+#define PA_PDRSTCR	(PA_BCR+0x0116)
+#define PA_POFF		(PA_BCR+0x0120)
+#define PA_LCDCR	(PA_BCR+0x0130)
+#define PA_TPCR		(PA_BCR+0x0140)
+#define PA_TPCKCR	(PA_BCR+0x0142)
+#define PA_TPRSTR	(PA_BCR+0x0144)
+#define PA_TPXPDR	(PA_BCR+0x0146)
+#define PA_TPYPDR	(PA_BCR+0x0148)
+#define PA_GPIOPFR	(PA_BCR+0x0150)
+#define PA_GPIODR	(PA_BCR+0x0152)
+#define PA_OBLED	(PA_BCR+0x0154)
+#define PA_SWSR		(PA_BCR+0x0156)
+#define PA_VERREG	(PA_BCR+0x0158)
+#define PA_SMCR		(PA_BCR+0x0200)
+#define PA_SMSMADR	(PA_BCR+0x0202)
+#define PA_SMMR		(PA_BCR+0x0204)
+#define PA_SMSADR1	(PA_BCR+0x0206)
+#define PA_SMSADR32	(PA_BCR+0x0244)
+#define PA_SMTRDR1	(PA_BCR+0x0246)
+#define PA_SMTRDR16	(PA_BCR+0x0264)
+#define PA_CU3MDR	(PA_BCR+0x0300)
+#define PA_CU5MDR	(PA_BCR+0x0302)
+#define PA_MMSR		(PA_BCR+0x0400)
+
+#define IVDR_CK_ON	4		/* iVDR Clock ON */
+#endif
+
+#define HL_FPGA_IRQ_BASE	200
+#define HL_NR_IRL		15
+
+#define IRQ_AX88796		(HL_FPGA_IRQ_BASE + 0)
+#define IRQ_CF			(HL_FPGA_IRQ_BASE + 1)
+#define IRQ_PSW			(HL_FPGA_IRQ_BASE + 2)
+#define IRQ_EXT0		(HL_FPGA_IRQ_BASE + 3)
+#define IRQ_EXT1		(HL_FPGA_IRQ_BASE + 4)
+#define IRQ_EXT2		(HL_FPGA_IRQ_BASE + 5)
+#define IRQ_EXT3		(HL_FPGA_IRQ_BASE + 6)
+#define IRQ_EXT4		(HL_FPGA_IRQ_BASE + 7)
+#define IRQ_EXT5		(HL_FPGA_IRQ_BASE + 8)
+#define IRQ_EXT6		(HL_FPGA_IRQ_BASE + 9)
+#define IRQ_EXT7		(HL_FPGA_IRQ_BASE + 10)
+#define IRQ_SMBUS		(HL_FPGA_IRQ_BASE + 11)
+#define IRQ_TP			(HL_FPGA_IRQ_BASE + 12)
+#define IRQ_RTC			(HL_FPGA_IRQ_BASE + 13)
+#define IRQ_TH_ALERT		(HL_FPGA_IRQ_BASE + 14)
+#define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
+#define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
+
+unsigned char *highlander_plat_irq_setup(void);
+
+#endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h
new file mode 100644
index 00000000000..9c2499a86ec
--- /dev/null
+++ b/arch/sh/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_RESOURCE_H
+#define __ASM_SH_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* __ASM_SH_RESOURCE_H */
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
new file mode 100644
index 00000000000..1813f4202a2
--- /dev/null
+++ b/arch/sh/include/asm/rtc.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+extern void (*board_time_init)(void);
+extern void (*rtc_sh_get_time)(struct timespec *);
+extern int (*rtc_sh_set_time)(const time_t);
+
+#define RTC_CAP_4_DIGIT_YEAR	(1 << 0)
+
+struct sh_rtc_platform_info {
+	unsigned long capabilities;
+};
+
+#include <cpu/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/arch/sh/include/asm/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h
new file mode 100644
index 00000000000..0a800157b82
--- /dev/null
+++ b/arch/sh/include/asm/rts7751r2d.h
@@ -0,0 +1,70 @@
+#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
+#define __ASM_SH_RENESAS_RTS7751R2D_H
+
+/*
+ * linux/include/asm-sh/renesas_rts7751r2d.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales RTS7751R2D support
+ */
+
+/* Board specific addresses.  */
+
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
+#define PA_CFCTL	0xa4000004	/* CF Timing control */
+#define PA_CFPOW	0xa4000006	/* CF Power control */
+#define PA_DISPCTL	0xa4000008	/* Display Timing control */
+#define PA_SDMPOW	0xa400000a	/* SD Power control */
+#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
+#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
+#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
+
+#define PA_R2D1_AXRST		0xa4000022	/* AX_LAN Reset control */
+#define PA_R2D1_CFRST		0xa4000024	/* CF Reset control */
+#define PA_R2D1_ADMRTS		0xa4000026	/* SD Reset control */
+#define PA_R2D1_EXTRST		0xa4000028	/* Extention Reset control */
+#define PA_R2D1_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
+
+#define PA_R2DPLUS_CFRST	0xa4000022	/* CF Reset control */
+#define PA_R2DPLUS_ADMRTS	0xa4000024	/* SD Reset control */
+#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extention Reset control */
+#define PA_R2DPLUS_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
+#define PA_R2DPLUS_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
+
+#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
+#define PA_VERREG	0xa4000032	/* FPGA Version Register */
+#define PA_INPORT	0xa4000034	/* KEY Input Port control */
+#define PA_OUTPORT	0xa4000036	/* LED control */
+#define PA_BVERREG	0xa4000038	/* Board Revision Register */
+
+#define PA_AX88796L	0xaa000400	/* AX88796L Area */
+#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define R2D_FPGA_IRQ_BASE	100
+
+#define IRQ_VOYAGER		(R2D_FPGA_IRQ_BASE + 0)
+#define IRQ_EXT			(R2D_FPGA_IRQ_BASE + 1)
+#define IRQ_TP			(R2D_FPGA_IRQ_BASE + 2)
+#define IRQ_RTC_T		(R2D_FPGA_IRQ_BASE + 3)
+#define IRQ_RTC_A		(R2D_FPGA_IRQ_BASE + 4)
+#define IRQ_SDCARD		(R2D_FPGA_IRQ_BASE + 5)
+#define IRQ_CF_CD		(R2D_FPGA_IRQ_BASE + 6)
+#define IRQ_CF_IDE		(R2D_FPGA_IRQ_BASE + 7)
+#define IRQ_AX88796		(R2D_FPGA_IRQ_BASE + 8)
+#define IRQ_KEY			(R2D_FPGA_IRQ_BASE + 9)
+#define IRQ_PCI_INTA		(R2D_FPGA_IRQ_BASE + 10)
+#define IRQ_PCI_INTB		(R2D_FPGA_IRQ_BASE + 11)
+#define IRQ_PCI_INTC		(R2D_FPGA_IRQ_BASE + 12)
+#define IRQ_PCI_INTD		(R2D_FPGA_IRQ_BASE + 13)
+
+/* arch/sh/boards/renesas/rts7751r2d/irq.c */
+void init_rts7751r2d_IRQ(void);
+int rts7751r2d_irq_demux(int);
+
+#endif  /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
new file mode 100644
index 00000000000..1987f3ea7f1
--- /dev/null
+++ b/arch/sh/include/asm/rwsem.h
@@ -0,0 +1,188 @@
+/*
+ * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff
+ * in lib/rwsem.c.
+ */
+
+#ifndef _ASM_SH_RWSEM_H
+#define _ASM_SH_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	long		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) \
+	  __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)				\
+do {						\
+	static struct lock_class_key __key;	\
+						\
+	__init_rwsem((sem), #sem, &__key);	\
+} while (0)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
+		smp_wmb();
+	else
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			smp_wmb();
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
+		smp_wmb();
+	else
+		rwsem_down_write_failed(sem);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	smp_wmb();
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	smp_wmb();
+	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	__down_write(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	smp_mb();
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SH_RWSEM_H */
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
new file mode 100644
index 00000000000..2084d037369
--- /dev/null
+++ b/arch/sh/include/asm/scatterlist.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_SCATTERLIST_H
+#define __ASM_SH_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+    unsigned long sg_magic;
+#endif
+    unsigned long page_link;
+    unsigned int offset;/* for highmem, page offset */
+    dma_addr_t dma_address;
+    unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD	PHYS_ADDR_MASK
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#endif /* !(__ASM_SH_SCATTERLIST_H) */
diff --git a/arch/sh/include/asm/sdk7780.h b/arch/sh/include/asm/sdk7780.h
new file mode 100644
index 00000000000..697dc865f21
--- /dev/null
+++ b/arch/sh/include/asm/sdk7780.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_SH_RENESAS_SDK7780_H
+#define __ASM_SH_RENESAS_SDK7780_H
+
+/*
+ * linux/include/asm-sh/sdk7780.h
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM			0xa0000000	/* EPROM */
+#define PA_ROM_SIZE		0x00400000	/* EPROM size 4M byte */
+#define PA_FROM			0xa0800000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash-ROM size 4M byte */
+#define PA_EXT1			0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM		0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4			0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_USER		PA_EXT4		/* User Expansion Space */
+
+#define PA_PERIPHERAL	PA_AREA5_IO
+
+/* SRAM/Reserved */
+#define PA_RESERVED	(PA_PERIPHERAL + 0)
+/* FPGA base address */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01000000)
+/* SMC LAN91C111 */
+#define PA_LAN		(PA_PERIPHERAL + 0x01800000)
+
+
+#define FPGA_SRSTR      (PA_FPGA + 0x000)	/* System reset */
+#define FPGA_IRQ0SR     (PA_FPGA + 0x010)	/* IRQ0 status */
+#define FPGA_IRQ0MR     (PA_FPGA + 0x020)	/* IRQ0 mask */
+#define FPGA_BDMR       (PA_FPGA + 0x030)	/* Board operating mode */
+#define FPGA_INTT0PRTR  (PA_FPGA + 0x040)	/* Interrupt test mode0 port */
+#define FPGA_INTT0SELR  (PA_FPGA + 0x050)	/* Int. test mode0 select */
+#define FPGA_INTT1POLR  (PA_FPGA + 0x060)	/* Int. test mode0 polarity */
+#define FPGA_NMIR       (PA_FPGA + 0x070)	/* NMI source */
+#define FPGA_NMIMR      (PA_FPGA + 0x080)	/* NMI mask */
+#define FPGA_IRQR       (PA_FPGA + 0x090)	/* IRQX source */
+#define FPGA_IRQMR      (PA_FPGA + 0x0A0)	/* IRQX mask */
+#define FPGA_SLEDR      (PA_FPGA + 0x0B0)	/* LED control */
+#define PA_LED			FPGA_SLEDR
+#define FPGA_MAPSWR     (PA_FPGA + 0x0C0)	/* Map switch */
+#define FPGA_FPVERR     (PA_FPGA + 0x0D0)	/* FPGA version */
+#define FPGA_FPDATER    (PA_FPGA + 0x0E0)	/* FPGA date */
+#define FPGA_RSE        (PA_FPGA + 0x100)	/* Reset source */
+#define FPGA_EASR       (PA_FPGA + 0x110)	/* External area select */
+#define FPGA_SPER       (PA_FPGA + 0x120)	/* Serial port enable */
+#define FPGA_IMSR       (PA_FPGA + 0x130)	/* Interrupt mode select */
+#define FPGA_PCIMR      (PA_FPGA + 0x140)	/* PCI Mode */
+#define FPGA_DIPSWMR    (PA_FPGA + 0x150)	/* DIPSW monitor */
+#define FPGA_FPODR      (PA_FPGA + 0x160)	/* Output port data */
+#define FPGA_ATAESR     (PA_FPGA + 0x170)	/* ATA extended bus status */
+#define FPGA_IRQPOLR    (PA_FPGA + 0x180)	/* IRQx polarity */
+
+
+#define SDK7780_NR_IRL			15
+/* IDE/ATA interrupt */
+#define IRQ_CFCARD				14
+/* SMC interrupt */
+#define IRQ_ETHERNET			6
+
+
+/* arch/sh/boards/renesas/sdk7780/irq.c */
+void init_sdk7780_IRQ(void);
+
+#define __IO_PREFIX		sdk7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h
new file mode 100644
index 00000000000..3280ed3802e
--- /dev/null
+++ b/arch/sh/include/asm/seccomp.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
new file mode 100644
index 00000000000..8f8f4ad400d
--- /dev/null
+++ b/arch/sh/include/asm/sections.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_SH_SECTIONS_H
+#define __ASM_SH_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern long __machvec_start, __machvec_end;
+extern char __uncached_start, __uncached_end;
+extern char _ebss[];
+
+#endif /* __ASM_SH_SECTIONS_H */
+
diff --git a/arch/sh/include/asm/segment.h b/arch/sh/include/asm/segment.h
new file mode 100644
index 00000000000..5e2725f4ac4
--- /dev/null
+++ b/arch/sh/include/asm/segment.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH_SEGMENT_H
+#define __ASM_SH_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
+#ifdef CONFIG_MMU
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+#else
+#define USER_DS		KERNEL_DS
+#endif
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define get_ds()	(KERNEL_DS)
+
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_SEGMENT_H */
diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h
new file mode 100644
index 00000000000..d79f3bd570b
--- /dev/null
+++ b/arch/sh/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_SH_SEMBUF_H
+#define __ASM_SH_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_SH_SEMBUF_H */
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h
new file mode 100644
index 00000000000..e13cc948ee6
--- /dev/null
+++ b/arch/sh/include/asm/serial.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/serial.h
+ *
+ * Configuration details for 8250, 16450, 16550, etc. serial ports
+ */
+
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+#include <linux/kernel.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#ifdef CONFIG_HD64465
+#include <asm/hd64465/hd64465.h>
+
+#define SERIAL_PORT_DFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
+
+#else
+
+#define SERIAL_PORT_DFNS
+
+#endif
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
new file mode 100644
index 00000000000..55a2bd328d9
--- /dev/null
+++ b/arch/sh/include/asm/setup.h
@@ -0,0 +1,27 @@
+#ifndef _SH_SETUP_H
+#define _SH_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define PARAM	((unsigned char *)empty_zero_page)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+/* ... */
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
+int setup_early_printk(char *);
+void sh_mv_setup(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _SH_SETUP_H */
diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
new file mode 100644
index 00000000000..d3c548443f2
--- /dev/null
+++ b/arch/sh/include/asm/sfp-machine.h
@@ -0,0 +1,84 @@
+/* Machine-dependent software floating-point definitions.
+   SuperH kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
+  do {                                                          \
+    if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)          \
+        && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs))     \
+      {                                                         \
+        R##_s = Y##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,Y);                                \
+      }                                                         \
+    else                                                        \
+      {                                                         \
+        R##_s = X##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,X);                                \
+      }                                                         \
+    R##_c = FP_CLS_NAN;                                         \
+  } while (0)
+
+//#define FP_ROUNDMODE		FPSCR_RM
+#define FP_DENORM_ZERO		1/*FPSCR_DN*/
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1<<4)
+#define FP_EX_DIVZERO		(1<<3)
+#define FP_EX_OVERFLOW		(1<<2)
+#define FP_EX_UNDERFLOW		(1<<1)
+#define FP_EX_INEXACT		(1<<0)
+
+#endif
+
diff --git a/arch/sh/include/asm/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
new file mode 100644
index 00000000000..8767f61acec
--- /dev/null
+++ b/arch/sh/include/asm/sh7760fb.h
@@ -0,0 +1,197 @@
+/*
+ * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver.
+ *
+ * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
+ * 			Manuel Lauss <mano@roarinelk.homelinux.net>
+ * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ */
+
+#ifndef _ASM_SH_SH7760FB_H
+#define _ASM_SH_SH7760FB_H
+
+/*
+ * some bits of the colormap registers should be written as zero.
+ * create a mask for that.
+ */
+#define SH7760FB_PALETTE_MASK 0x00f8fcf8
+
+/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */
+#define SH7760FB_DMA_MASK 0x0C000000
+
+/* palette */
+#define LDPR(x) (((x) << 2))
+
+/* framebuffer registers and bits */
+#define LDICKR 0x400
+#define LDMTR 0x402
+/* see sh7760fb.h for LDMTR bits */
+#define LDDFR 0x404
+#define LDDFR_PABD (1 << 8)
+#define LDDFR_COLOR_MASK 0x7F
+#define LDSMR 0x406
+#define LDSMR_ROT (1 << 13)
+#define LDSARU 0x408
+#define LDSARL 0x40c
+#define LDLAOR 0x410
+#define LDPALCR 0x412
+#define LDPALCR_PALS (1 << 4)
+#define LDPALCR_PALEN (1 << 0)
+#define LDHCNR 0x414
+#define LDHSYNR 0x416
+#define LDVDLNR 0x418
+#define LDVTLNR 0x41a
+#define LDVSYNR 0x41c
+#define LDACLNR 0x41e
+#define LDINTR 0x420
+#define LDPMMR 0x424
+#define LDPSPR 0x426
+#define LDCNTR 0x428
+#define LDCNTR_DON (1 << 0)
+#define LDCNTR_DON2 (1 << 4)
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define LDLIRNR       0x440
+/* LDINTR bit */
+# define LDINTR_MINTEN (1 << 15)
+# define LDINTR_FINTEN (1 << 14)
+# define LDINTR_VSINTEN (1 << 13)
+# define LDINTR_VEINTEN (1 << 12)
+# define LDINTR_MINTS (1 << 11)
+# define LDINTR_FINTS (1 << 10)
+# define LDINTR_VSINTS (1 << 9)
+# define LDINTR_VEINTS (1 << 8)
+# define VINT_START (LDINTR_VSINTEN)
+# define VINT_CHECK (LDINTR_VSINTS)
+#else
+/* LDINTR bit */
+# define LDINTR_VINTSEL (1 << 12)
+# define LDINTR_VINTE (1 << 8)
+# define LDINTR_VINTS (1 << 0)
+# define VINT_START (LDINTR_VINTSEL)
+# define VINT_CHECK (LDINTR_VINTS)
+#endif
+
+/* HSYNC polarity inversion */
+#define LDMTR_FLMPOL (1 << 15)
+
+/* VSYNC polarity inversion */
+#define LDMTR_CL1POL (1 << 14)
+
+/* DISPLAY-ENABLE polarity inversion */
+#define LDMTR_DISPEN_LOWACT (1 << 13)
+
+/* DISPLAY DATA BUS polarity inversion */
+#define LDMTR_DPOL_LOWACT (1 << 12)
+
+/* AC modulation signal enable */
+#define LDMTR_MCNT (1 << 10)
+
+/* Disable output of HSYNC during VSYNC period */
+#define LDMTR_CL1CNT (1 << 9)
+
+/* Disable output of VSYNC during VSYNC period */
+#define LDMTR_CL2CNT (1 << 8)
+
+/* Display types supported by the LCDC */
+#define LDMTR_STN_MONO_4       0x00
+#define LDMTR_STN_MONO_8       0x01
+#define LDMTR_STN_COLOR_4      0x08
+#define LDMTR_STN_COLOR_8      0x09
+#define LDMTR_STN_COLOR_12     0x0A
+#define LDMTR_STN_COLOR_16     0x0B
+#define LDMTR_DSTN_MONO_8      0x11
+#define LDMTR_DSTN_MONO_16     0x13
+#define LDMTR_DSTN_COLOR_8     0x19
+#define LDMTR_DSTN_COLOR_12    0x1A
+#define LDMTR_DSTN_COLOR_16    0x1B
+#define LDMTR_TFT_COLOR_16     0x2B
+
+/* framebuffer color layout */
+#define LDDFR_1BPP_MONO 0x00
+#define LDDFR_2BPP_MONO 0x01
+#define LDDFR_4BPP_MONO 0x02
+#define LDDFR_6BPP_MONO 0x04
+#define LDDFR_4BPP 0x0A
+#define LDDFR_8BPP 0x0C
+#define LDDFR_16BPP_RGB555 0x1D
+#define LDDFR_16BPP_RGB565 0x2D
+
+/* LCDC Pixclock sources */
+#define LCDC_CLKSRC_BUSCLOCK 0
+#define LCDC_CLKSRC_PERIPHERAL 1
+#define LCDC_CLKSRC_EXTERNAL 2
+
+#define LDICKR_CLKSRC(x) \
+       (((x) & 3) << 12)
+
+/* LCDC pixclock input divider. Set to 1 at a minimum! */
+#define LDICKR_CLKDIV(x) \
+       ((x) & 0x1f)
+
+struct sh7760fb_platdata {
+
+	/* Set this member to a valid fb_videmode for the display you
+	 * wish to use.  The following members must be initialized:
+	 * xres, yres, hsync_len, vsync_len, sync,
+	 * {left,right,upper,lower}_margin.
+	 * The driver uses the above members to calculate register values
+	 * and memory requirements. Other members are ignored but may
+	 * be used by other framebuffer layer components.
+	 */
+	struct fb_videomode *def_mode;
+
+	/* LDMTR includes display type and signal polarity.  The
+	 * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
+	 * data above; however the polarities of the following signals
+	 * must be encoded in the ldmtr member:
+	 * Display Enable signal (default high-active)  DISPEN_LOWACT
+	 * Display Data signals (default high-active)   DPOL_LOWACT
+	 * AC Modulation signal (default off)           MCNT
+	 * Hsync-During-Vsync suppression (default off) CL1CNT
+	 * Vsync-during-vsync suppression (default off) CL2CNT
+	 * NOTE: also set a display type!
+	 * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
+	 */
+	u16 ldmtr;
+
+	/* LDDFR controls framebuffer image format (depth, organization)
+	 * Use ONE of the LDDFR_?BPP_* macros!
+	 */
+	u16 lddfr;
+
+	/* LDPMMR and LDPSPR control the timing of the power signals
+	 * for the display. Please read the SH7760 Hardware Manual,
+	 * Chapters 30.3.17, 30.3.18 and 30.4.6!
+	 */
+	u16 ldpmmr;
+	u16 ldpspr;
+
+	/* LDACLNR contains the line numbers after which the AC modulation
+	 * signal is to toggle. Set to ZERO for TFTs or displays which
+	 * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
+	 */
+	u16 ldaclnr;
+
+	/* LDICKR contains information on pixelclock source and config.
+	 * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
+	 * minimal value for CLKDIV() must be 1!.
+	 */
+	u16 ldickr;
+
+	/* set this member to 1 if you wish to use the LCDC's hardware
+	 * rotation function.  This is limited to displays <= 320x200
+	 * pixels resolution!
+	 */
+	int rotate;		/* set to 1 to rotate 90 CCW */
+
+	/* set this to 1 to suppress vsync irq use. */
+	int novsync;
+
+	/* blanking hook for platform. Set this if your platform can do
+	 * more than the LCDC in terms of blanking (e.g. disable clock
+	 * generator / backlight power supply / etc.
+	 */
+	void (*blank) (int);
+};
+
+#endif /* _ASM_SH_SH7760FB_H */
diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h
new file mode 100644
index 00000000000..8750cc85297
--- /dev/null
+++ b/arch/sh/include/asm/sh7763rdp.h
@@ -0,0 +1,54 @@
+#ifndef __ASM_SH_SH7763RDP_H
+#define __ASM_SH_SH7763RDP_H
+
+/*
+ * linux/include/asm-sh/sh7763drp.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* clock control */
+#define MSTPCR1 0xFFC80038
+
+/* PORT */
+#define PORT_PSEL0	0xFFEF0070
+#define PORT_PSEL1	0xFFEF0072
+#define PORT_PSEL2	0xFFEF0074
+#define PORT_PSEL3	0xFFEF0076
+#define PORT_PSEL4	0xFFEF0078
+
+#define PORT_PACR	0xFFEF0000
+#define PORT_PCCR	0xFFEF0004
+#define PORT_PFCR	0xFFEF000A
+#define PORT_PGCR	0xFFEF000C
+#define PORT_PHCR	0xFFEF000E
+#define PORT_PICR	0xFFEF0010
+#define PORT_PJCR	0xFFEF0012
+#define PORT_PKCR	0xFFEF0014
+#define PORT_PLCR	0xFFEF0016
+#define PORT_PMCR	0xFFEF0018
+#define PORT_PNCR	0xFFEF001A
+
+/* FPGA */
+#define CPLD_BOARD_ID_ERV_REG	0xB1000000
+#define CPLD_CPLD_CMD_REG		0xB1000006
+
+/*
+ * USB SH7763RDP board can use Host only.
+ */
+#define USB_USBHSC	0xFFEC80f0
+
+/* arch/sh/boards/renesas/sh7763rdp/irq.c */
+void init_sh7763rdp_IRQ(void);
+int sh7763rdp_irq_demux(int irq);
+#define __IO_PREFIX	sh7763rdp
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
new file mode 100644
index 00000000000..1ce27d5c749
--- /dev/null
+++ b/arch/sh/include/asm/sh7785lcr.h
@@ -0,0 +1,55 @@
+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address			| S2-5 = OFF	| S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0)	| NOR Flash	| NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1)	| PLD		| PLD
+ * 0x06000000 - 0x07ffffff(CS1)	| reserved	| I2C
+ * 0x08000000 - 0x0bffffff(CS2)	| USB		| DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3)	| SD		| DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4)	| SM107		| SM107
+ * 0x14000000 - 0x17ffffff(CS5)	| I2C		| USB
+ * 0x18000000 - 0x1bffffff(CS6)	| reserved	| SD
+ * 0x40000000 - 0x5fffffff	| DDR SDRAM	| (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR		0x00000000
+#define NOR_FLASH_SIZE		0x04000000
+
+#define PLD_BASE_ADDR		0x04000000
+#define PLD_PCICR		(PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR	(PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR		(PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR		(PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR		(PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR		(PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR		(PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR		(PLD_BASE_ADDR + 0x0e)
+
+#define SM107_MEM_ADDR		0x10000000
+#define SM107_MEM_SIZE		0x00e00000
+#define SM107_REG_ADDR		0x13e00000
+#define SM107_REG_SIZE		0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR		0x14000000	/* USB */
+#define CG200_ADDR		0x18000000	/* SD */
+#define PCA9564_ADDR		0x06000000	/* I2C */
+#else
+#define R8A66597_ADDR		0x08000000
+#define CG200_ADDR		0x0c000000
+#define PCA9564_ADDR		0x14000000
+#endif
+
+#define R8A66597_SIZE		0x00000100
+#define CG200_SIZE		0x00010000
+#define PCA9564_SIZE		0x00000100
+
+#endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
+
diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h
new file mode 100644
index 00000000000..0ca261956e3
--- /dev/null
+++ b/arch/sh/include/asm/sh_bios.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_SH_BIOS_H
+#define __ASM_SH_BIOS_H
+
+/*
+ * Copyright (C) 2000 Greg Banks, Mitch Davis
+ * C API to interface to the standard LinuxSH BIOS
+ * usually from within the early stages of kernel boot.
+ */
+
+
+extern void sh_bios_console_write(const char *buf, unsigned int len);
+extern void sh_bios_char_out(char ch);
+extern int sh_bios_in_gdb_mode(void);
+extern void sh_bios_gdb_detach(void);
+
+extern void sh_bios_get_node_addr(unsigned char *node_addr);
+extern void sh_bios_shutdown(unsigned int how);
+
+#endif /* __ASM_SH_BIOS_H */
diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
new file mode 100644
index 00000000000..bb832584f3c
--- /dev/null
+++ b/arch/sh/include/asm/sh_eth.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_SH_ETH_H__
+#define __ASM_SH_ETH_H__
+
+enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
+
+struct sh_eth_plat_data {
+	int phy;
+	int edmac_endian;
+};
+
+#endif
diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
new file mode 100644
index 00000000000..b5a4dd5a972
--- /dev/null
+++ b/arch/sh/include/asm/sh_keysc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_KEYSC_H__
+#define __ASM_KEYSC_H__
+
+#define SH_KEYSC_MAXKEYS 30
+
+struct sh_keysc_info {
+	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
+	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
+	int delay;
+	int keycodes[SH_KEYSC_MAXKEYS];
+};
+
+#endif /* __ASM_KEYSC_H__ */
diff --git a/arch/sh/include/asm/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
new file mode 100644
index 00000000000..130102f663f
--- /dev/null
+++ b/arch/sh/include/asm/sh_mobile_lcdc.h
@@ -0,0 +1,72 @@
+#ifndef __ASM_SH_MOBILE_LCDC_H__
+#define __ASM_SH_MOBILE_LCDC_H__
+
+#include <linux/fb.h>
+
+enum { RGB8,   /* 24bpp, 8:8:8 */
+       RGB9,   /* 18bpp, 9:9 */
+       RGB12A, /* 24bpp, 12:12 */
+       RGB12B, /* 12bpp */
+       RGB16,  /* 16bpp */
+       RGB18,  /* 18bpp */
+       RGB24,  /* 24bpp */
+       SYS8A,  /* 24bpp, 8:8:8 */
+       SYS8B,  /* 18bpp, 8:8:2 */
+       SYS8C,  /* 18bpp, 2:8:8 */
+       SYS8D,  /* 16bpp, 8:8 */
+       SYS9,   /* 18bpp, 9:9 */
+       SYS12,  /* 24bpp, 12:12 */
+       SYS16A, /* 16bpp */
+       SYS16B, /* 18bpp, 16:2 */
+       SYS16C, /* 18bpp, 2:16 */
+       SYS18,  /* 18bpp */
+       SYS24 };/* 24bpp */
+
+enum { LCDC_CHAN_DISABLED = 0,
+       LCDC_CHAN_MAINLCD,
+       LCDC_CHAN_SUBLCD };
+
+enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL };
+
+struct sh_mobile_lcdc_sys_bus_cfg {
+	unsigned long ldmt2r;
+	unsigned long ldmt3r;
+};
+
+struct sh_mobile_lcdc_sys_bus_ops {
+	void (*write_index)(void *handle, unsigned long data);
+	void (*write_data)(void *handle, unsigned long data);
+	unsigned long (*read_data)(void *handle);
+};
+
+struct sh_mobile_lcdc_board_cfg {
+	void *board_data;
+	int (*setup_sys)(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+	void (*display_on)(void *board_data);
+	void (*display_off)(void *board_data);
+};
+
+struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
+	unsigned long width;
+	unsigned long height;
+};
+
+struct sh_mobile_lcdc_chan_cfg {
+	int chan;
+	int bpp;
+	int interface_type; /* selects RGBn or SYSn I/F, see above */
+	int clock_divider;
+	struct fb_videomode lcd_cfg;
+	struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
+	struct sh_mobile_lcdc_board_cfg board_cfg;
+	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
+};
+
+struct sh_mobile_lcdc_info {
+	unsigned long lddckr;
+	int clock_source;
+	struct sh_mobile_lcdc_chan_cfg ch[2];
+};
+
+#endif /* __ASM_SH_MOBILE_LCDC_H__ */
diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h
new file mode 100644
index 00000000000..b2101f49052
--- /dev/null
+++ b/arch/sh/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_SH_SHMBUF_H
+#define __ASM_SH_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_SH_SHMBUF_H */
diff --git a/arch/sh/include/asm/shmin.h b/arch/sh/include/asm/shmin.h
new file mode 100644
index 00000000000..36ba138a81f
--- /dev/null
+++ b/arch/sh/include/asm/shmin.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_SHMIN_H
+#define __ASM_SH_SHMIN_H
+
+#define SHMIN_IO_BASE 0xb0000000UL
+
+#define SHMIN_NE_IRQ IRQ2_IRQ
+#define SHMIN_NE_BASE 0x300
+
+#endif
diff --git a/arch/sh/include/asm/shmparam.h b/arch/sh/include/asm/shmparam.h
new file mode 100644
index 00000000000..ba1758d9010
--- /dev/null
+++ b/arch/sh/include/asm/shmparam.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-sh/shmparam.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SHMPARAM_H
+#define __ASM_SH_SHMPARAM_H
+
+/*
+ * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value
+ * for everyone, and work out the specifics from the probed cache descriptor.
+ */
+#define	SHMLBA	0x4000		 /* attach addr a multiple of this */
+
+#define __ARCH_FORCE_SHMLBA
+
+#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/arch/sh/include/asm/sigcontext.h b/arch/sh/include/asm/sigcontext.h
new file mode 100644
index 00000000000..8ce1435bc0b
--- /dev/null
+++ b/arch/sh/include/asm/sigcontext.h
@@ -0,0 +1,40 @@
+#ifndef __ASM_SH_SIGCONTEXT_H
+#define __ASM_SH_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+	/* CPU registers */
+	unsigned long long sc_regs[63];
+	unsigned long long sc_tregs[8];
+	unsigned long long sc_pc;
+	unsigned long long sc_sr;
+
+	/* FPU registers */
+	unsigned long long sc_fpregs[32];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpvalid;
+#else
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+
+#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \
+    defined(__SH2A__) || defined(CONFIG_CPU_SH2A)
+	/* FPU registers */
+	unsigned long sc_fpregs[16];
+	unsigned long sc_xfpregs[16];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpul;
+	unsigned int sc_ownedfp;
+#endif
+#endif
+};
+
+#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h
new file mode 100644
index 00000000000..813040ed68a
--- /dev/null
+++ b/arch/sh/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_SIGINFO_H
+#define __ASM_SH_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* __ASM_SH_SIGINFO_H */
diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h
new file mode 100644
index 00000000000..5c5c1e85208
--- /dev/null
+++ b/arch/sh/include/asm/signal.h
@@ -0,0 +1,160 @@
+#ifndef __ASM_SH_SIGNAL_H
+#define __ASM_SH_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct pt_regs;
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_SIGNAL_H */
diff --git a/arch/sh/include/asm/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
new file mode 100644
index 00000000000..585da2a8fc4
--- /dev/null
+++ b/arch/sh/include/asm/smc37c93x.h
@@ -0,0 +1,190 @@
+#ifndef __ASM_SH_SMC37C93X_H
+#define __ASM_SH_SMC37C93X_H
+
+/*
+ * linux/include/asm-sh/smc37c93x.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * SMSC 37C93x Super IO Chip support
+ */
+
+/* Default base I/O address */
+#define FDC_PRIMARY_BASE	0x3f0
+#define IDE1_PRIMARY_BASE	0x1f0
+#define IDE1_SECONDARY_BASE	0x170
+#define PARPORT_PRIMARY_BASE	0x378
+#define COM1_PRIMARY_BASE	0x2f8
+#define COM2_PRIMARY_BASE	0x3f8
+#define RTC_PRIMARY_BASE	0x070
+#define KBC_PRIMARY_BASE	0x060
+#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
+
+/* Logical device number */
+#define LDN_FDC			0
+#define LDN_IDE1		1
+#define LDN_IDE2		2
+#define LDN_PARPORT		3
+#define LDN_COM1		4
+#define LDN_COM2		5
+#define LDN_RTC			6
+#define LDN_KBC			7
+#define LDN_AUXIO		8
+
+/* Configuration port and key */
+#define CONFIG_PORT		0x3f0
+#define INDEX_PORT		CONFIG_PORT
+#define DATA_PORT		0x3f1
+#define CONFIG_ENTER		0x55
+#define CONFIG_EXIT		0xaa
+
+/* Configuration index */
+#define CURRENT_LDN_INDEX	0x07
+#define POWER_CONTROL_INDEX	0x22
+#define ACTIVATE_INDEX		0x30
+#define IO_BASE_HI_INDEX	0x60
+#define IO_BASE_LO_INDEX	0x61
+#define IRQ_SELECT_INDEX	0x70
+#define DMA_SELECT_INDEX	0x74
+
+#define GPIO46_INDEX		0xc6
+#define GPIO47_INDEX		0xc7
+
+/* UART stuff. Only for debugging.  */
+/* UART Register */
+
+#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
+#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
+#define UART_IER	0x2	/* Interrupt Enable Register */
+#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
+#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
+#define UART_LCR	0x6	/* Line Control Register */
+#define UART_MCR	0x8	/* MODEM Control Register */
+#define UART_LSR	0xa	/* Line Status Register */
+#define UART_MSR	0xc	/* MODEM Status Register */
+#define UART_SCR	0xe	/* Scratch Register */
+#define UART_DLL	0x0	/* Divisor Latch (LS) */
+#define UART_DLM	0x2	/* Divisor Latch (MS) */
+
+#ifndef __ASSEMBLY__
+typedef struct uart_reg {
+	volatile __u16 rbr;
+	volatile __u16 ier;
+	volatile __u16 iir;
+	volatile __u16 lcr;
+	volatile __u16 mcr;
+	volatile __u16 lsr;
+	volatile __u16 msr;
+	volatile __u16 scr;
+} uart_reg;
+#endif /* ! __ASSEMBLY__ */
+
+/* Alias for Write Only Register */
+
+#define thr	rbr
+#define tcr	iir
+
+/* Alias for Divisor Latch Register */
+
+#define dll	rbr
+#define dlm	ier
+#define fcr	iir
+
+/* Interrupt Enable Register */
+
+#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
+#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
+#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
+#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
+
+/* Interrupt Ident Register */
+
+#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
+#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
+#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
+#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
+#define IIR_FIFO	0xc000	/* FIFOs enabled */
+
+/* FIFO Control Register */
+
+#define FCR_FEN		0x0100	/* FIFO enable */
+#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
+#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
+#define FCR_DMA		0x0800	/* DMA mode select */
+#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
+#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
+
+/* Line Control Register */
+
+#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
+#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
+#define LCR_STB		0x0400	/* Number of Stop Bits */
+#define LCR_PEN		0x0800	/* Parity Enable */
+#define LCR_EPS		0x1000	/* Even Parity Select */
+#define LCR_SP		0x2000	/* Stick Parity */
+#define LCR_SB		0x4000	/* Set Break */
+#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
+
+/* MODEM Control Register */
+
+#define MCR_DTR		0x0100	/* Data Terminal Ready */
+#define MCR_RTS		0x0200	/* Request to Send */
+#define MCR_OUT1	0x0400	/* Out 1 */
+#define MCR_IRQEN	0x0800	/* IRQ Enable */
+#define MCR_LOOP	0x1000	/* Loop */
+
+/* Line Status Register */
+
+#define LSR_DR		0x0100	/* Data Ready */
+#define LSR_OE		0x0200	/* Overrun Error */
+#define LSR_PE		0x0400	/* Parity Error */
+#define LSR_FE		0x0800	/* Framing Error */
+#define LSR_BI		0x1000	/* Break Interrupt */
+#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
+#define LSR_TEMT	0x4000	/* Transmitter Empty */
+#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
+
+/* MODEM Status Register */
+
+#define MSR_DCTS	0x0100	/* Delta Clear to Send */
+#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
+#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
+#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
+#define MSR_CTS		0x1000	/* Clear to Send */
+#define MSR_DSR		0x2000	/* Data Set Ready */
+#define MSR_RI		0x4000	/* Ring Indicator */
+#define MSR_DCD		0x8000	/* Data Carrier Detect */
+
+/* Baud Rate Divisor */
+
+#define UART_CLK	(1843200)	/* 1.8432 MHz */
+#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
+
+/* RTC register definition */
+#define RTC_SECONDS             0
+#define RTC_SECONDS_ALARM       1
+#define RTC_MINUTES             2
+#define RTC_MINUTES_ALARM       3
+#define RTC_HOURS               4
+#define RTC_HOURS_ALARM         5
+#define RTC_DAY_OF_WEEK         6
+#define RTC_DAY_OF_MONTH        7
+#define RTC_MONTH               8
+#define RTC_YEAR                9
+#define RTC_FREQ_SELECT		10
+# define RTC_UIP 0x80
+# define RTC_DIV_CTL 0x70
+/* This RTC can work under 32.768KHz clock only.  */
+# define RTC_OSC_ENABLE 0x20
+# define RTC_OSC_DISABLE 0x00
+#define RTC_CONTROL     	11
+# define RTC_SET 0x80
+# define RTC_PIE 0x40
+# define RTC_AIE 0x20
+# define RTC_UIE 0x10
+# define RTC_SQWE 0x08
+# define RTC_DM_BINARY 0x04
+# define RTC_24H 0x02
+# define RTC_DST_EN 0x01
+
+#endif  /* __ASM_SH_SMC37C93X_H */
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
new file mode 100644
index 00000000000..593343cd26e
--- /dev/null
+++ b/arch/sh/include/asm/smp.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_SH_SMP_H
+#define __ASM_SH_SMP_H
+
+#include <linux/bitops.h>
+#include <linux/cpumask.h>
+
+#ifdef CONFIG_SMP
+
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/current.h>
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+#define hard_smp_processor_id()	plat_smp_processor_id()
+
+/* Map from cpu id to sequential logical cpu number. */
+extern int __cpu_number_map[NR_CPUS];
+#define cpu_number_map(cpu)  __cpu_number_map[cpu]
+
+/* The reverse map from sequential logical cpu number to cpu id.  */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu)  __cpu_logical_map[cpu]
+
+/* I've no idea what the real meaning of this is */
+#define PROC_CHANGE_PENALTY	20
+
+#define NO_PROC_ID	(-1)
+
+#define SMP_MSG_FUNCTION	0
+#define SMP_MSG_RESCHEDULE	1
+#define SMP_MSG_FUNCTION_SINGLE	2
+#define SMP_MSG_NR		3
+
+void plat_smp_setup(void);
+void plat_prepare_cpus(unsigned int max_cpus);
+int plat_smp_processor_id(void);
+void plat_start_cpu(unsigned int cpu, unsigned long entry_point);
+void plat_send_ipi(unsigned int cpu, unsigned int message);
+int plat_register_ipi_handler(unsigned int message,
+			      void (*handler)(void *), void *arg);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#else
+
+#define hard_smp_processor_id()	(0)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_SMP_H */
diff --git a/arch/sh/include/asm/snapgear.h b/arch/sh/include/asm/snapgear.h
new file mode 100644
index 00000000000..042d95f51c4
--- /dev/null
+++ b/arch/sh/include/asm/snapgear.h
@@ -0,0 +1,71 @@
+/*
+ * include/asm-sh/snapgear.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#if defined(CONFIG_CPU_SH4)
+/*
+ * The external interrupt lines, these take up ints 0 - 15 inclusive
+ * depending on the priority for the interrupt.  In fact the priority
+ * is the interrupt :-)
+ */
+
+#define IRL0_IRQ	2
+#define IRL0_PRIORITY	13
+
+#define IRL1_IRQ	5
+#define IRL1_PRIORITY	10
+
+#define IRL2_IRQ	8
+#define IRL2_PRIORITY	7
+
+#define IRL3_IRQ	11
+#define IRL3_PRIORITY	4
+#endif
+
+#define __IO_PREFIX	snapgear
+#include <asm/io_generic.h>
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit        Read                   Write
+ * -----------------------------------------------
+ * D0         DCD on ttySC1          power
+ * D1         Reset Switch           heatbeat
+ * D2         ttySC0 CTS (7100)      LAN
+ * D3         -                      WAN
+ * D4         ttySC0 DCD (7100)      CONSOLE
+ * D5         -                      ONLINE
+ * D6         -                      VPN
+ * D7         -                      DTR on ttySC1
+ * D8         -                      ttySC0 RTS (7100)
+ * D9         -                      ttySC0 DTR (7100)
+ * D10        -                      RTC SCLK
+ * D11        RTC DATA               RTC DATA
+ * D12        -                      RTS RESET
+ */
+
+#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+extern unsigned short secureedge5410_ioport;
+
+#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+	 (secureedge5410_ioport = \
+			((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+#define SECUREEDGE_READ_IOPORT() \
+	 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+#endif
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h
new file mode 100644
index 00000000000..6d4bf651295
--- /dev/null
+++ b/arch/sh/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_SH_SOCKET_H
+#define __ASM_SH_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_RCVBUFFORCE	32
+#define SO_SNDBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* __ASM_SH_SOCKET_H */
diff --git a/arch/sh/include/asm/sockios.h b/arch/sh/include/asm/sockios.h
new file mode 100644
index 00000000000..cf8b96b1f9a
--- /dev/null
+++ b/arch/sh/include/asm/sockios.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_SH_SOCKIOS_H
+#define __ASM_SH_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	_IOR('s', 100, struct timeval) /* Get stamp (timeval) */
+#define SIOCGSTAMPNS	_IOR('s', 101, struct timespec) /* Get stamp (timespec) */
+#endif /* __ASM_SH_SOCKIOS_H */
diff --git a/arch/sh/include/asm/sparsemem.h b/arch/sh/include/asm/sparsemem.h
new file mode 100644
index 00000000000..547a540b666
--- /dev/null
+++ b/arch/sh/include/asm/sparsemem.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SH_SPARSEMEM_H
+#define __ASM_SH_SPARSEMEM_H
+
+#ifdef __KERNEL__
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSADDR_BITS		2^N: how much physical address space we have
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS	26
+#define MAX_PHYSADDR_BITS	32
+#define MAX_PHYSMEM_BITS	32
+
+#endif
+
+#endif /* __ASM_SH_SPARSEMEM_H */
diff --git a/arch/sh/include/asm/spi.h b/arch/sh/include/asm/spi.h
new file mode 100644
index 00000000000..e96f5b0953c
--- /dev/null
+++ b/arch/sh/include/asm/spi.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SPI_H__
+#define __ASM_SPI_H__
+
+struct sh_spi_info;
+
+struct sh_spi_info {
+	int			 bus_num;
+	int			 num_chipselect;
+
+	void (*chip_select)(struct sh_spi_info *spi, int cs, int state);
+};
+
+#endif /* __ASM_SPI_H__ */
diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h
new file mode 100644
index 00000000000..e793181d64d
--- /dev/null
+++ b/arch/sh/include/asm/spinlock.h
@@ -0,0 +1,223 @@
+/*
+ * include/asm-sh/spinlock.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2006, 2007 Akio Idehara
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SPINLOCK_H
+#define __ASM_SH_SPINLOCK_H
+
+/*
+ * The only locking implemented here uses SH-4A opcodes. For others,
+ * split this out as per atomic-*.h.
+ */
+#ifndef CONFIG_CPU_SH4A
+#error "Need movli.l/movco.l for spinlocks"
+#endif
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+#define __raw_spin_is_locked(x)		((x)->lock <= 0)
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define __raw_spin_unlock_wait(x) \
+	do { cpu_relax(); } while ((x)->lock)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions.  They have a cost.
+ */
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+	unsigned long oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __raw_spin_lock	\n\t"
+		"mov		%0, %1				\n\t"
+		"mov		#0, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"cmp/pl		%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"mov		#1, %0 ! __raw_spin_unlock	\n\t"
+		"mov.l		%0, @%1				\n\t"
+		: "=&z" (tmp)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __raw_spin_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"mov		#0, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+
+	return oldval;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(x)	((x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(x)	((x)->lock == RW_LOCK_BIAS)
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! __raw_read_lock	\n\t"
+		"cmp/pl		%0				\n\t"
+		"bf		1b				\n\t"
+		"add		#-1, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! __raw_read_unlock	\n\t"
+		"add		#1, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! __raw_write_lock	\n\t"
+		"cmp/hs		%2, %0				\n\t"
+		"bf		1b				\n\t"
+		"sub		%2, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	__asm__ __volatile__ (
+		"mov.l		%1, @%0 ! __raw_write_unlock	\n\t"
+		:
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __raw_read_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/pl		%0				\n\t"
+		"bf		2f				\n\t"
+		"add		#-1, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"2:						\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+
+	return (oldval > 0);
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __raw_write_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/hs		%3, %0				\n\t"
+		"bf		2f				\n\t"
+		"sub		%3, %0				\n\t"
+		"2:						\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+
+	return (oldval > (RW_LOCK_BIAS - 1));
+}
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SH_SPINLOCK_H */
diff --git a/arch/sh/include/asm/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..b4d244e7b60
--- /dev/null
+++ b/arch/sh/include/asm/spinlock_types.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_SPINLOCK_TYPES_H
+#define __ASM_SH_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED		{ 1 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define RW_LOCK_BIAS			0x01000000
+#define __RAW_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
+
+#endif
diff --git a/arch/sh/include/asm/stat.h b/arch/sh/include/asm/stat.h
new file mode 100644
index 00000000000..e1810cc6e3d
--- /dev/null
+++ b/arch/sh/include/asm/stat.h
@@ -0,0 +1,138 @@
+#ifndef __ASM_SH_STAT_H
+#define __ASM_SH_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned short	st_dev;
+	unsigned char	__pad0[10];
+
+	unsigned long	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned short	st_rdev;
+	unsigned char	__pad3[10];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;	/* will be high 32 bits of ctime someday */
+
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+#else
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long long	st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+#endif
+
+#endif /* __ASM_SH_STAT_H */
diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h
new file mode 100644
index 00000000000..9202a023328
--- /dev/null
+++ b/arch/sh/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_STATFS_H
+#define __ASM_SH_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* __ASM_SH_STATFS_H */
diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h
new file mode 100644
index 00000000000..8c1ea21dc0a
--- /dev/null
+++ b/arch/sh/include/asm/string.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_SUPERH32
+# include "string_32.h"
+#else
+# include "string_64.h"
+#endif
diff --git a/arch/sh/include/asm/string_32.h b/arch/sh/include/asm/string_32.h
new file mode 100644
index 00000000000..55f8db6bc1d
--- /dev/null
+++ b/arch/sh/include/asm/string_32.h
@@ -0,0 +1,131 @@
+#ifndef __ASM_SH_STRING_H
+#define __ASM_SH_STRING_H
+
+#ifdef __KERNEL__
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * But consider these trivial functions to be public domain.
+ */
+
+#define __HAVE_ARCH_STRCPY
+static inline char *strcpy(char *__dest, const char *__src)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	__asm__ __volatile__("1:\n\t"
+			     "mov.b	@%1+, %2\n\t"
+			     "mov.b	%2, @%0\n\t"
+			     "cmp/eq	#0, %2\n\t"
+			     "bf/s	1b\n\t"
+			     " add	#1, %0\n\t"
+			     : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+			     : "0" (__dest), "1" (__src)
+			     : "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char *strncpy(char *__dest, const char *__src, size_t __n)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return __xdest;
+
+	__asm__ __volatile__(
+		"1:\n"
+		"mov.b	@%1+, %2\n\t"
+		"mov.b	%2, @%0\n\t"
+		"cmp/eq	#0, %2\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq	%5,%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0\n"
+		"2:"
+		: "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+		: "0" (__dest), "1" (__src), "r" (__src+__n)
+		: "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char *__cs, const char *__ct)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq #0, %3\n\t"
+		"bt	2f\n\t"
+		"cmp/eq %2, %3\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n\t"
+		"sub	%3, %2\n"
+		"2:"
+		: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return 0;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq %6, %0\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq #0, %3\n\t"
+		"bt/s	3f\n\t"
+		" cmp/eq %3, %2\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n"
+		"2:\n\t"
+		"sub	%3, %2\n"
+		"3:"
+		:"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct), "r" (__cs+__n)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *__s, int __c, size_t __n);
+
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_STRING_H */
diff --git a/arch/sh/include/asm/string_64.h b/arch/sh/include/asm/string_64.h
new file mode 100644
index 00000000000..aa1fef229c7
--- /dev/null
+++ b/arch/sh/include/asm/string_64.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_STRING_64_H
+#define __ASM_SH_STRING_64_H
+
+/*
+ * include/asm-sh/string_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *dest, const void *src, size_t count);
+
+#endif /* __ASM_SH_STRING_64_H */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
new file mode 100644
index 00000000000..056d68cd210
--- /dev/null
+++ b/arch/sh/include/asm/system.h
@@ -0,0 +1,190 @@
+#ifndef __ASM_SH_SYSTEM_H
+#define __ASM_SH_SYSTEM_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
+ * Copyright (C) 2002 Paul Mundt
+ */
+
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/types.h>
+#include <asm/ptrace.h>
+
+#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
+
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define __icbi()			\
+{					\
+	unsigned long __addr;		\
+	__addr = 0xa8000000;		\
+	__asm__ __volatile__(		\
+		"icbi   %0\n\t"		\
+		: /* no output */	\
+		: "m" (__m(__addr)));	\
+}
+#endif
+
+/*
+ * A brief note on ctrl_barrier(), the control register write barrier.
+ *
+ * Legacy SH cores typically require a sequence of 8 nops after
+ * modification of a control register in order for the changes to take
+ * effect. On newer cores (like the sh4a and sh5) this is accomplished
+ * with icbi.
+ *
+ * Also note that on sh4a in the icbi case we can forego a synco for the
+ * write barrier, as it's not necessary for control registers.
+ *
+ * Historically we have only done this type of barrier for the MMUCR, but
+ * it's also necessary for the CCR, so we make it generic here instead.
+ */
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define mb()		__asm__ __volatile__ ("synco": : :"memory")
+#define rmb()		mb()
+#define wmb()		__asm__ __volatile__ ("synco": : :"memory")
+#define ctrl_barrier()	__icbi()
+#define read_barrier_depends()	do { } while(0)
+#else
+#define mb()		__asm__ __volatile__ ("": : :"memory")
+#define rmb()		mb()
+#define wmb()		__asm__ __volatile__ ("": : :"memory")
+#define ctrl_barrier()	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
+#define read_barrier_depends()	do { } while(0)
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+
+#ifdef CONFIG_GUSA_RB
+#include <asm/cmpxchg-grb.h>
+#else
+#include <asm/cmpxchg-irq.h>
+#endif
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size)				\
+({							\
+	unsigned long __xchg__res;			\
+	volatile void *__xchg_ptr = (ptr);		\
+	switch (size) {					\
+	case 4:						\
+		__xchg__res = xchg_u32(__xchg_ptr, x);	\
+		break;					\
+	case 1:						\
+		__xchg__res = xchg_u8(__xchg_ptr, x);	\
+		break;					\
+	default:					\
+		__xchg_called_with_bad_pointer();	\
+		__xchg__res = x;			\
+		break;					\
+	}						\
+							\
+	__xchg__res;					\
+})
+
+#define xchg(ptr,x)	\
+	((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
+
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+		unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+
+extern void *set_exception_table_vec(unsigned int vec, void *handler);
+
+static inline void *set_exception_table_evt(unsigned int evt, void *handler)
+{
+	return set_exception_table_vec(evt >> 5, handler);
+}
+
+/*
+ * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
+ */
+#ifdef CONFIG_CPU_SH2A
+extern unsigned int instruction_size(unsigned int insn);
+#elif defined(CONFIG_SUPERH32)
+#define instruction_size(insn)	(2)
+#else
+#define instruction_size(insn)	(4)
+#endif
+
+extern unsigned long cached_to_uncached;
+
+extern struct dentry *sh_debugfs_root;
+
+void per_cpu_trap_init(void);
+
+asmlinkage void break_point_trap(void);
+
+#ifdef CONFIG_SUPERH32
+#define BUILD_TRAP_HANDLER(name)					\
+asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5,	\
+				    unsigned long r6, unsigned long r7,	\
+				    struct pt_regs __regs)
+
+#define TRAP_HANDLER_DECL				\
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);	\
+	unsigned int vec = regs->tra;			\
+	(void)vec;
+#else
+#define BUILD_TRAP_HANDLER(name)	\
+asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
+#define TRAP_HANDLER_DECL
+#endif
+
+BUILD_TRAP_HANDLER(address_error);
+BUILD_TRAP_HANDLER(debug);
+BUILD_TRAP_HANDLER(bug);
+BUILD_TRAP_HANDLER(fpu_error);
+BUILD_TRAP_HANDLER(fpu_state_restore);
+
+#define arch_align_stack(x) (x)
+
+struct mem_access {
+	unsigned long (*from)(void *dst, const void *src, unsigned long cnt);
+	unsigned long (*to)(void *dst, const void *src, unsigned long cnt);
+};
+
+#ifdef CONFIG_SUPERH32
+# include "system_32.h"
+#else
+# include "system_64.h"
+#endif
+
+#endif
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
new file mode 100644
index 00000000000..f11bcf0855e
--- /dev/null
+++ b/arch/sh/include/asm/system_32.h
@@ -0,0 +1,102 @@
+#ifndef __ASM_SH_SYSTEM_32_H
+#define __ASM_SH_SYSTEM_32_H
+
+#include <linux/types.h>
+
+struct task_struct *__switch_to(struct task_struct *prev,
+				struct task_struct *next);
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+#define switch_to(prev, next, last)					\
+do {									\
+	register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp;	\
+	register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc;	\
+	register u32 *__ts4 __asm__ ("r4") = (u32 *)prev;		\
+	register u32 *__ts5 __asm__ ("r5") = (u32 *)next;		\
+	register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp;	\
+	register u32 __ts7 __asm__ ("r7") = next->thread.pc;		\
+	struct task_struct *__last;					\
+									\
+	__asm__ __volatile__ (						\
+		".balign 4\n\t"						\
+		"stc.l	gbr, @-r15\n\t"					\
+		"sts.l	pr, @-r15\n\t"					\
+		"mov.l	r8, @-r15\n\t"					\
+		"mov.l	r9, @-r15\n\t"					\
+		"mov.l	r10, @-r15\n\t"					\
+		"mov.l	r11, @-r15\n\t"					\
+		"mov.l	r12, @-r15\n\t"					\
+		"mov.l	r13, @-r15\n\t"					\
+		"mov.l	r14, @-r15\n\t"					\
+		"mov.l	r15, @r1\t! save SP\n\t"			\
+		"mov.l	@r6, r15\t! change to new stack\n\t"		\
+		"mova	1f, %0\n\t"					\
+		"mov.l	%0, @r2\t! save PC\n\t"				\
+		"mov.l	2f, %0\n\t"					\
+		"jmp	@%0\t! call __switch_to\n\t"			\
+		" lds	r7, pr\t!  with return to new PC\n\t"		\
+		".balign	4\n"					\
+		"2:\n\t"						\
+		".long	__switch_to\n"					\
+		"1:\n\t"						\
+		"mov.l	@r15+, r14\n\t"					\
+		"mov.l	@r15+, r13\n\t"					\
+		"mov.l	@r15+, r12\n\t"					\
+		"mov.l	@r15+, r11\n\t"					\
+		"mov.l	@r15+, r10\n\t"					\
+		"mov.l	@r15+, r9\n\t"					\
+		"mov.l	@r15+, r8\n\t"					\
+		"lds.l	@r15+, pr\n\t"					\
+		"ldc.l	@r15+, gbr\n\t"					\
+		: "=z" (__last)						\
+		: "r" (__ts1), "r" (__ts2), "r" (__ts4),		\
+		  "r" (__ts5), "r" (__ts6), "r" (__ts7)			\
+		: "r3", "t");						\
+									\
+	last = __last;							\
+} while (0)
+
+#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text")))
+
+/*
+ * Jump to uncached area.
+ * When handling TLB or caches, we need to do it from an uncached area.
+ */
+#define jump_to_uncached()			\
+do {						\
+	unsigned long __dummy;			\
+						\
+	__asm__ __volatile__(			\
+		"mova	1f, %0\n\t"		\
+		"add	%1, %0\n\t"		\
+		"jmp	@%0\n\t"		\
+		" nop\n\t"			\
+		".balign 4\n"			\
+		"1:"				\
+		: "=&z" (__dummy)		\
+		: "r" (cached_to_uncached));	\
+} while (0)
+
+/*
+ * Back to cached area.
+ */
+#define back_to_cached()				\
+do {							\
+	unsigned long __dummy;				\
+	ctrl_barrier();					\
+	__asm__ __volatile__(				\
+		"mov.l	1f, %0\n\t"			\
+		"jmp	@%0\n\t"			\
+		" nop\n\t"				\
+		".balign 4\n"				\
+		"1:	.long 2f\n"			\
+		"2:"					\
+		: "=&r" (__dummy));			\
+} while (0)
+
+int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
+			    struct mem_access *ma);
+
+#endif /* __ASM_SH_SYSTEM_32_H */
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
new file mode 100644
index 00000000000..943acf5ea07
--- /dev/null
+++ b/arch/sh/include/asm/system_64.h
@@ -0,0 +1,40 @@
+#ifndef __ASM_SH_SYSTEM_64_H
+#define __ASM_SH_SYSTEM_64_H
+
+/*
+ * include/asm-sh/system_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/processor.h>
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+struct task_struct *sh64_switch_to(struct task_struct *prev,
+				   struct thread_struct *prev_thread,
+				   struct task_struct *next,
+				   struct thread_struct *next_thread);
+
+#define switch_to(prev,next,last)				\
+do {								\
+	if (last_task_used_math != next) {			\
+		struct pt_regs *regs = next->thread.uregs;	\
+		if (regs) regs->sr |= SR_FD;			\
+	}							\
+	last = sh64_switch_to(prev, &prev->thread, next,	\
+			      &next->thread);			\
+} while (0)
+
+#define __uses_jump_to_uncached
+
+#define jump_to_uncached()	do { } while (0)
+#define back_to_cached()	do { } while (0)
+
+#endif /* __ASM_SH_SYSTEM_64_H */
diff --git a/arch/sh/include/asm/systemh7751.h b/arch/sh/include/asm/systemh7751.h
new file mode 100644
index 00000000000..4161122c84e
--- /dev/null
+++ b/arch/sh/include/asm/systemh7751.h
@@ -0,0 +1,71 @@
+#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
+#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
+
+/*
+ * linux/include/asm-sh/systemh/7751systemh.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SystemH support
+
+ * Modified for 7751 SystemH by
+ * Jonathan Short, 2002.
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
+#define PA_LED		0xba000000	/* LED */
+#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_MODE     (PA_MRSHPC + 4)
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#define IRQ_79C973	13
+
+#define __IO_PREFIX	sh7751systemh
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h
new file mode 100644
index 00000000000..77db116948c
--- /dev/null
+++ b/arch/sh/include/asm/termbits.h
@@ -0,0 +1,198 @@
+#ifndef __ASM_SH_TERMBITS_H
+#define __ASM_SH_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define	   BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* input baud rate */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ASM_SH_TERMBITS_H */
diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h
new file mode 100644
index 00000000000..0a8c793c76f
--- /dev/null
+++ b/arch/sh/include/asm/termios.h
@@ -0,0 +1,90 @@
+#ifndef __ASM_SH_TERMIOS_H
+#define __ASM_SH_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_SH_TERMIOS_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
new file mode 100644
index 00000000000..0a894cafb1d
--- /dev/null
+++ b/arch/sh/include/asm/thread_info.h
@@ -0,0 +1,162 @@
+#ifndef __ASM_SH_THREAD_INFO_H
+#define __ASM_SH_THREAD_INFO_H
+
+/* SuperH version
+ * Copyright (C) 2002  Niibe Yutaka
+ *
+ * The copyright of original i386 version is:
+ *
+ *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;
+	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+	mm_segment_t		addr_limit;	/* thread address space */
+	struct restart_block	restart_block;
+	unsigned long		previous_sp;	/* sp of previous stack in case
+						   of nested IRQ stacks */
+	__u8			supervisor_stack[0];
+};
+
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+
+#if defined(CONFIG_4KSTACKS)
+#define THREAD_SIZE_ORDER	(0)
+#elif defined(CONFIG_PAGE_SIZE_4KB)
+#define THREAD_SIZE_ORDER	(1)
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define THREAD_SIZE_ORDER	(1)
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+#define THREAD_SIZE_ORDER	(0)
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define THREAD_SIZE_ORDER	(0)
+#else
+#error "Unknown thread size"
+#endif
+
+#define THREAD_SIZE	(PAGE_SIZE << THREAD_SIZE_ORDER)
+#define STACK_WARN	(THREAD_SIZE >> 3)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("r15") __used;
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+#if defined(CONFIG_SUPERH64)
+	__asm__ __volatile__ ("getcon	cr17, %0" : "=r" (ti));
+#elif defined(CONFIG_CPU_HAS_SR_RB)
+	__asm__ __volatile__ ("stc	r7_bank, %0" : "=r" (ti));
+#else
+	unsigned long __dummy;
+
+	__asm__ __volatile__ (
+		"mov	r15, %0\n\t"
+		"and	%1, %0\n\t"
+		: "=&r" (ti), "=r" (__dummy)
+		: "1" (~(THREAD_SIZE - 1))
+		: "memory");
+#endif
+
+	return ti;
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(ti)	kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(ti)	kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+#define free_thread_info(ti)	kfree(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK	3	/* restore signal mask in do_signal() */
+#define TIF_SINGLESTEP		4	/* singlestepping active */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SECCOMP		6	/* secure computing */
+#define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+#define TIF_FREEZE		19	/* Freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_USEDFPU		(1 << TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+/*
+ * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within a byte, or we
+ * blow the tst immediate size constraints and need to fix up
+ * arch/sh/kernel/entry-common.S.
+ */
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
+				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
+				 _TIF_SINGLESTEP    | _TIF_RESTORE_SIGMASK | \
+				 _TIF_NOTIFY_RESUME)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h
new file mode 100644
index 00000000000..a7ca3a195bb
--- /dev/null
+++ b/arch/sh/include/asm/timer.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_SH_TIMER_H
+#define __ASM_SH_TIMER_H
+
+#include <linux/sysdev.h>
+#include <linux/clocksource.h>
+#include <cpu/timer.h>
+
+struct sys_timer_ops {
+	int (*init)(void);
+	int (*start)(void);
+	int (*stop)(void);
+	cycle_t (*read)(void);
+#ifndef CONFIG_GENERIC_TIME
+	unsigned long (*get_offset)(void);
+#endif
+};
+
+struct sys_timer {
+	const char		*name;
+
+	struct sys_device	dev;
+	struct sys_timer_ops	*ops;
+};
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
+extern struct sys_timer *sys_timer;
+
+#ifndef CONFIG_GENERIC_TIME
+static inline unsigned long get_timer_offset(void)
+{
+	return sys_timer->ops->get_offset();
+}
+#endif
+
+/* arch/sh/kernel/timers/timer.c */
+struct sys_timer *get_sys_timer(void);
+
+/* arch/sh/kernel/time.c */
+void handle_timer_tick(void);
+extern unsigned long sh_hpt_frequency;
+
+#endif /* __ASM_SH_TIMER_H */
diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h
new file mode 100644
index 00000000000..a873e24113c
--- /dev/null
+++ b/arch/sh/include/asm/timex.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-sh/timex.h
+ *
+ * sh architecture timex specifications
+ */
+#ifndef __ASM_SH_TIMEX_H
+#define __ASM_SH_TIMEX_H
+
+#define CLOCK_TICK_RATE		(CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static __inline__ cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#endif /* __ASM_SH_TIMEX_H */
diff --git a/arch/sh/include/asm/titan.h b/arch/sh/include/asm/titan.h
new file mode 100644
index 00000000000..03f3583c891
--- /dev/null
+++ b/arch/sh/include/asm/titan.h
@@ -0,0 +1,17 @@
+/*
+ * Platform defintions for Titan
+ */
+#ifndef _ASM_SH_TITAN_H
+#define _ASM_SH_TITAN_H
+
+#define __IO_PREFIX titan
+#include <asm/io_generic.h>
+
+/* IRQ assignments */
+#define TITAN_IRQ_WAN		2	/* eth0 (WAN) */
+#define TITAN_IRQ_LAN		5	/* eth1 (LAN) */
+#define TITAN_IRQ_MPCIA		8	/* mPCI A */
+#define TITAN_IRQ_MPCIB		11	/* mPCI B */
+#define TITAN_IRQ_USB		11	/* USB */
+
+#endif /* __ASM_SH_TITAN_H */
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
new file mode 100644
index 00000000000..88ff1ae8a6b
--- /dev/null
+++ b/arch/sh/include/asm/tlb.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_TLB_H
+#define __ASM_SH_TLB_H
+
+#ifdef CONFIG_SUPERH64
+# include "tlb_64.h"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define tlb_start_vma(tlb, vma) \
+	flush_cache_range(vma, vma->vm_start, vma->vm_end)
+
+#define tlb_end_vma(tlb, vma)	\
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address)	do { } while (0)
+
+/*
+ * Flush whole TLBs for MM
+ */
+#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_TLB_H */
diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h
new file mode 100644
index 00000000000..ef0ae2a28f2
--- /dev/null
+++ b/arch/sh/include/asm/tlb_64.h
@@ -0,0 +1,71 @@
+/*
+ * include/asm-sh/tlb_64.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_TLB_64_H
+#define __ASM_SH_TLB_64_H
+
+/* ITLB defines */
+#define ITLB_FIXED	0x00000000	/* First fixed ITLB, see head.S */
+#define ITLB_LAST_VAR_UNRESTRICTED	0x000003F0	/* Last ITLB */
+
+/* DTLB defines */
+#define DTLB_FIXED	0x00800000	/* First fixed DTLB, see head.S */
+#define DTLB_LAST_VAR_UNRESTRICTED	0x008003F0	/* Last DTLB */
+
+#ifndef __ASSEMBLY__
+
+/**
+ * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries
+ *
+ * @tlb:	TLB entry
+ */
+#define for_each_dtlb_entry(tlb)		\
+	for (tlb  = cpu_data->dtlb.first;	\
+	     tlb <= cpu_data->dtlb.last;	\
+	     tlb += cpu_data->dtlb.step)
+
+/**
+ * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries
+ *
+ * @tlb:	TLB entry
+ */
+#define for_each_itlb_entry(tlb)		\
+	for (tlb  = cpu_data->itlb.first;	\
+	     tlb <= cpu_data->itlb.last;	\
+	     tlb += cpu_data->itlb.step)
+
+/**
+ * __flush_tlb_slot - Flushes TLB slot @slot.
+ *
+ * @slot:	Address of TLB slot.
+ */
+static inline void __flush_tlb_slot(unsigned long long slot)
+{
+	__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
+}
+
+#ifdef CONFIG_MMU
+/* arch/sh64/mm/tlb.c */
+int sh64_tlb_init(void);
+unsigned long long sh64_next_free_dtlb_entry(void);
+unsigned long long sh64_get_wired_dtlb_entry(void);
+int sh64_put_wired_dtlb_entry(unsigned long long entry);
+void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
+			 unsigned long asid, unsigned long paddr);
+void sh64_teardown_tlb_slot(unsigned long long config_addr);
+#else
+#define sh64_tlb_init()					do { } while (0)
+#define sh64_next_free_dtlb_entry()			(0)
+#define sh64_get_wired_dtlb_entry()			(0)
+#define sh64_put_wired_dtlb_entry(entry)		do { } while (0)
+#define sh64_setup_tlb_slot(conf, virt, asid, phys)	do { } while (0)
+#define sh64_teardown_tlb_slot(addr)			do { } while (0)
+#endif /* CONFIG_MMU */
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_TLB_64_H */
diff --git a/arch/sh/include/asm/tlbflush.h b/arch/sh/include/asm/tlbflush.h
new file mode 100644
index 00000000000..e0ac97221ae
--- /dev/null
+++ b/arch/sh/include/asm/tlbflush.h
@@ -0,0 +1,49 @@
+#ifndef __ASM_SH_TLBFLUSH_H
+#define __ASM_SH_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+				 unsigned long page);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+					 unsigned long end);
+extern void local_flush_tlb_one(unsigned long asid, unsigned long page);
+
+#ifdef CONFIG_SMP
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_one(unsigned long asid, unsigned long page);
+
+#else
+
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_one(asid, page)	local_flush_tlb_one(asid, page)
+
+#define flush_tlb_range(vma, start, end)	\
+	local_flush_tlb_range(vma, start, end)
+
+#define flush_tlb_kernel_range(start, end)	\
+	local_flush_tlb_kernel_range(start, end)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_TLBFLUSH_H */
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
new file mode 100644
index 00000000000..95f0085e098
--- /dev/null
+++ b/arch/sh/include/asm/topology.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_SH_TOPOLOGY_H
+#define _ASM_SH_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+/* sched_domains SD_NODE_INIT for sh machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 2,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_FORK	\
+				| SD_BALANCE_EXEC	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#define cpu_to_node(cpu)	((void)(cpu),0)
+#define parent_node(node)	((void)(node),0)
+
+#define node_to_cpumask(node)	((void)node, cpu_online_map)
+#define node_to_first_cpu(node)	((void)(node),0)
+
+#define pcibus_to_node(bus)	((void)(bus), -1)
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
new file mode 100644
index 00000000000..beea4e6f8df
--- /dev/null
+++ b/arch/sh/include/asm/types.h
@@ -0,0 +1,35 @@
+#ifndef __ASM_SH_TYPES_H
+#define __ASM_SH_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#ifdef CONFIG_SUPERH32
+typedef u16 opcode_t;
+#else
+typedef u32 opcode_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_TYPES_H */
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
new file mode 100644
index 00000000000..075848f43b6
--- /dev/null
+++ b/arch/sh/include/asm/uaccess.h
@@ -0,0 +1,258 @@
+#ifndef __ASM_SH_UACCESS_H
+#define __ASM_SH_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <asm/segment.h>
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#define __addr_ok(addr) \
+	((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * Uhhuh, this needs 33-bit arithmetic. We have a carry..
+ *
+ * sum := addr + size;  carry? --> flag = true;
+ * if (sum >= addr_limit) flag = true;
+ */
+#define __access_ok(addr, size)		\
+	(__addr_ok((addr) + (size)))
+#define access_ok(type, addr, size)	\
+	(__chk_user_ptr(addr),		\
+	 __access_ok((unsigned long __force)(addr), (size)))
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As SuperH uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr)		__put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x,ptr)		__get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr)	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x,ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long __gu_val = 0;					\
+	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
+	if (likely(access_ok(VERIFY_READ, __gu_addr, (size))))		\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
+	__chk_user_ptr(ptr);					\
+	__put_user_size(__pu_val, __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
+	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))	\
+		__put_user_size(__pu_val, __pu_addr, (size),	\
+				__pu_err);			\
+	__pu_err;						\
+})
+
+#ifdef CONFIG_SUPERH32
+# include "uaccess_32.h"
+#else
+# include "uaccess_64.h"
+#endif
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied */
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
+
+static __always_inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_user(to, (__force void *)from, n);
+}
+
+static __always_inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_user((__force void *)to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/*
+ * Clear the area and return remaining number of bytes
+ * (on failure.  Usually it's 0.)
+ */
+__kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n)						\
+({									\
+	void __user * __cl_addr = (addr);				\
+	unsigned long __cl_size = (n);					\
+									\
+	if (__cl_size && access_ok(VERIFY_WRITE,			\
+		((unsigned long)(__cl_addr)), __cl_size))		\
+		__cl_size = __clear_user(__cl_addr, __cl_size);		\
+									\
+	__cl_size;							\
+})
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+#define strncpy_from_user(dest,src,count)				\
+({									\
+	unsigned long __sfu_src = (unsigned long)(src);			\
+	int __sfu_count = (int)(count);					\
+	long __sfu_res = -EFAULT;					\
+									\
+	if (__access_ok(__sfu_src, __sfu_count))			\
+		__sfu_res = __strncpy_from_user((unsigned long)(dest),	\
+				__sfu_src, __sfu_count);		\
+									\
+	__sfu_res;							\
+})
+
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long __copy_from = (unsigned long) from;
+	__kernel_size_t __copy_size = (__kernel_size_t) n;
+
+	if (__copy_size && __access_ok(__copy_from, __copy_size))
+		return __copy_user(to, from, __copy_size);
+
+	return __copy_size;
+}
+
+static inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	unsigned long __copy_to = (unsigned long) to;
+	__kernel_size_t __copy_size = (__kernel_size_t) n;
+
+	if (__copy_size && __access_ok(__copy_to, __copy_size))
+		return __copy_user(to, from, __copy_size);
+
+	return __copy_size;
+}
+
+/**
+ * strnlen_user: - Get the size of a string in user space.
+ * @s: The string to measure.
+ * @n: The maximum valid length
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than @n.
+ */
+static inline long strnlen_user(const char __user *s, long n)
+{
+	if (!__addr_ok(s))
+		return 0;
+	else
+		return __strnlen_user(s, n);
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
+
+#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU)
+#define ARCH_HAS_SEARCH_EXTABLE
+#endif
+
+int fixup_exception(struct pt_regs *regs);
+/* Returns 0 if exception not found and fixup.unit otherwise.  */
+unsigned long search_exception_table(unsigned long addr);
+const struct exception_table_entry *search_exception_tables(unsigned long addr);
+
+
+#endif /* __ASM_SH_UACCESS_H */
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
new file mode 100644
index 00000000000..ae0d24f6653
--- /dev/null
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -0,0 +1,248 @@
+/*
+ * User space memory access functions
+ *
+ * Copyright (C) 1999, 2002  Niibe Yutaka
+ * Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ */
+#ifndef __ASM_SH_UACCESS_32_H
+#define __ASM_SH_UACCESS_32_H
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		__get_user_asm(x, ptr, retval, "b");		\
+		break;						\
+	case 2:							\
+		__get_user_asm(x, ptr, retval, "w");		\
+		break;						\
+	case 4:							\
+		__get_user_asm(x, ptr, retval, "l");		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __get_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov." insn "	%2, %1\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov	#0, %1\n\t" \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#else
+#define __get_user_asm(x, addr, err, insn)		\
+do {							\
+	__asm__ __volatile__ (				\
+		"mov." insn "	%1, %0\n\t"		\
+		: "=&r" (x)				\
+		: "m" (__m(addr))			\
+	);						\
+} while (0)
+#endif /* CONFIG_MMU */
+
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)		\
+do {							\
+	retval = 0;					\
+	switch (size) {					\
+	case 1:						\
+		__put_user_asm(x, ptr, retval, "b");	\
+		break;					\
+	case 2:						\
+		__put_user_asm(x, ptr, retval, "w");	\
+		break;					\
+	case 4:						\
+		__put_user_asm(x, ptr, retval, "l");	\
+		break;					\
+	case 8:						\
+		__put_user_u64(x, ptr, retval);		\
+		break;					\
+	default:					\
+		__put_user_unknown();			\
+	}						\
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __put_user_asm(x, addr, err, insn)			\
+do {								\
+	__asm__ __volatile__ (					\
+		"1:\n\t"					\
+		"mov." insn "	%1, %2\n\t"			\
+		"2:\n"						\
+		".section	.fixup,\"ax\"\n"		\
+		"3:\n\t"					\
+		"mov.l	4f, %0\n\t"				\
+		"jmp	@%0\n\t"				\
+		" mov	%3, %0\n\t"				\
+		".balign	4\n"				\
+		"4:	.long	2b\n\t"				\
+		".previous\n"					\
+		".section	__ex_table,\"a\"\n\t"		\
+		".long	1b, 3b\n\t"				\
+		".previous"					\
+		: "=&r" (err)					\
+		: "r" (x), "m" (__m(addr)), "i" (-EFAULT),	\
+		  "0" (err)					\
+		: "memory"					\
+	);							\
+} while (0)
+#else
+#define __put_user_asm(x, addr, err, insn)		\
+do {							\
+	__asm__ __volatile__ (				\
+		"mov." insn "	%0, %1\n\t"		\
+		: /* no outputs */			\
+		: "r" (x), "m" (__m(addr))		\
+		: "memory"				\
+	);						\
+} while (0)
+#endif /* CONFIG_MMU */
+
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%R1,%2\n\t" \
+	"mov.l	%S1,%T2\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#else
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%S1,%2\n\t" \
+	"mov.l	%R1,%T2\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#endif
+
+extern void __put_user_unknown(void);
+
+static inline int
+__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
+{
+	__kernel_size_t res;
+	unsigned long __dummy, _d, _s, _c;
+
+	__asm__ __volatile__(
+		"9:\n"
+		"mov.b	@%2+, %1\n\t"
+		"cmp/eq	#0, %1\n\t"
+		"bt/s	2f\n"
+		"1:\n"
+		"mov.b	%1, @%3\n\t"
+		"dt	%4\n\t"
+		"bf/s	9b\n\t"
+		" add	#1, %3\n\t"
+		"2:\n\t"
+		"sub	%4, %0\n"
+		"3:\n"
+		".section .fixup,\"ax\"\n"
+		"4:\n\t"
+		"mov.l	5f, %1\n\t"
+		"jmp	@%1\n\t"
+		" mov	%9, %0\n\t"
+		".balign 4\n"
+		"5:	.long 3b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 9b,4b\n"
+		".previous"
+		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
+		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
+		  "i" (-EFAULT)
+		: "memory", "t");
+
+	return res;
+}
+
+/*
+ * Return the size of a string (including the ending 0 even when we have
+ * exceeded the maximum string length).
+ */
+static inline long __strnlen_user(const char __user *__s, long __n)
+{
+	unsigned long res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"1:\t"
+		"mov.b	@(%0,%3), %1\n\t"
+		"cmp/eq	%4, %0\n\t"
+		"bt/s	2f\n\t"
+		" add	#1, %0\n\t"
+		"tst	%1, %1\n\t"
+		"bf	1b\n\t"
+		"2:\n"
+		".section .fixup,\"ax\"\n"
+		"3:\n\t"
+		"mov.l	4f, %1\n\t"
+		"jmp	@%1\n\t"
+		" mov	#0, %0\n"
+		".balign 4\n"
+		"4:	.long 2b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 1b,3b\n"
+		".previous"
+		: "=z" (res), "=&r" (__dummy)
+		: "0" (0), "r" (__s), "r" (__n)
+		: "t");
+	return res;
+}
+
+#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
new file mode 100644
index 00000000000..5580fd47100
--- /dev/null
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_SH_UACCESS_64_H
+#define __ASM_SH_UACCESS_64_H
+
+/*
+ * include/asm-sh/uaccess_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __get_user_asm_b(x, ptr);		\
+		break;						\
+	case 2:							\
+		retval = __get_user_asm_w(x, ptr);		\
+		break;						\
+	case 4:							\
+		retval = __get_user_asm_l(x, ptr);		\
+		break;						\
+	case 8:							\
+		retval = __get_user_asm_q(x, ptr);		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+extern long __get_user_asm_b(void *, long);
+extern long __get_user_asm_w(void *, long);
+extern long __get_user_asm_l(void *, long);
+extern long __get_user_asm_q(void *, long);
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __put_user_asm_b(x, ptr);		\
+		break;						\
+	case 2:							\
+		retval = __put_user_asm_w(x, ptr);		\
+		break;						\
+	case 4:							\
+		retval = __put_user_asm_l(x, ptr);		\
+		break;						\
+	case 8:							\
+		retval = __put_user_asm_q(x, ptr);		\
+		break;						\
+	default:						\
+		__put_user_unknown();				\
+	}							\
+} while (0)
+
+extern long __put_user_asm_b(void *, long);
+extern long __put_user_asm_w(void *, long);
+extern long __put_user_asm_l(void *, long);
+extern long __put_user_asm_q(void *, long);
+extern void __put_user_unknown(void);
+
+extern long __strnlen_user(const char *__s, long __n);
+
+#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
new file mode 100644
index 00000000000..a7b9028bbfb
--- /dev/null
+++ b/arch/sh/include/asm/ubc.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-sh/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_UBC_H
+#define __ASM_SH_UBC_H
+#ifdef __KERNEL__
+
+#include <cpu/ubc.h>
+
+/* User Break Controller */
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define UBC_TYPE_SH7729	(current_cpu_data.type == CPU_SH7729)
+#else
+#define UBC_TYPE_SH7729	0
+#endif
+
+#define BAMR_ASID		(1 << 2)
+#define BAMR_NONE		0
+#define BAMR_10			0x1
+#define BAMR_12			0x2
+#define BAMR_ALL		0x3
+#define BAMR_16			0x8
+#define BAMR_20			0x9
+
+#define BBR_INST		(1 << 4)
+#define BBR_DATA		(2 << 4)
+#define BBR_READ		(1 << 2)
+#define BBR_WRITE		(2 << 2)
+#define BBR_BYTE		0x1
+#define BBR_HALF		0x2
+#define BBR_LONG		0x3
+#define BBR_QUAD		(1 << 6)	/* SH7750 */
+#define BBR_CPU			(1 << 6)	/* SH7709A,SH7729 */
+#define BBR_DMA			(2 << 6)	/* SH7709A,SH7729 */
+
+#define BRCR_CMFA		(1 << 15)
+#define BRCR_CMFB		(1 << 14)
+#define BRCR_PCTE		(1 << 11)
+#define BRCR_PCBA		(1 << 10)	/* 1: after execution */
+#define BRCR_DBEB		(1 << 7)
+#define BRCR_PCBB		(1 << 6)
+#define BRCR_SEQ		(1 << 3)
+#define BRCR_UBDE		(1 << 0)
+
+#ifndef __ASSEMBLY__
+/* arch/sh/kernel/cpu/ubc.S */
+extern void ubc_sleep(void);
+
+#ifdef CONFIG_UBC_WAKEUP
+extern void ubc_wakeup(void);
+#else
+#define ubc_wakeup()	do { } while (0)
+#endif
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UBC_H */
diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h
new file mode 100644
index 00000000000..202ef1d5a3c
--- /dev/null
+++ b/arch/sh/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_SH_UCONTEXT_H
+#define __ASM_SH_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __ASM_SH_UCONTEXT_H */
diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h
new file mode 100644
index 00000000000..c1641a01d50
--- /dev/null
+++ b/arch/sh/include/asm/unaligned.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_SH_UNALIGNED_H
+#define _ASM_SH_UNALIGNED_H
+
+/* SH can't handle unaligned accesses. */
+#ifdef __LITTLE_ENDIAN__
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#else
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#endif
+
+#endif /* _ASM_SH_UNALIGNED_H */
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
new file mode 100644
index 00000000000..65be656ead7
--- /dev/null
+++ b/arch/sh/include/asm/unistd.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_SUPERH32
+#  include "unistd_32.h"
+# else
+#  include "unistd_64.h"
+# endif
+#else
+# ifdef __SH5__
+#  include "unistd_64.h"
+# else
+#  include "unistd_32.h"
+# endif
+#endif
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
new file mode 100644
index 00000000000..d52c000cf92
--- /dev/null
+++ b/arch/sh/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef __ASM_SH_UNISTD_H
+#define __ASM_SH_UNISTD_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_streams1		188	/* some people actually want it */
+#define __NR_streams2		189	/* some people actually want it */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+#define __NR_add_key		285
+#define __NR_request_key	286
+#define __NR_keyctl		287
+#define __NR_ioprio_set		288
+#define __NR_ioprio_get		289
+#define __NR_inotify_init	290
+#define __NR_inotify_add_watch	291
+#define __NR_inotify_rm_watch	292
+/* 293 is unused */
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd_create	322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
+#define __NR_timerfd_settime	325
+#define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+
+#define NR_syscalls 333
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UNISTD_H */
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
new file mode 100644
index 00000000000..7c54e91753c
--- /dev/null
+++ b/arch/sh/include/asm/unistd_64.h
@@ -0,0 +1,423 @@
+#ifndef __ASM_SH_UNISTD_64_H
+#define __ASM_SH_UNISTD_64_H
+
+/*
+ * include/asm-sh/unistd_64.h
+ *
+ * This file contains the system call numbers.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ * Copyright (C) 2004  Sean McGoogan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102	/* old implementation of socket systemcall */
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_streams1		188	/* some people actually want it */
+#define __NR_streams2		189	/* some people actually want it */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+
+/* Non-multiplexed socket family */
+#define __NR_socket		220
+#define __NR_bind		221
+#define __NR_connect		222
+#define __NR_listen		223
+#define __NR_accept		224
+#define __NR_getsockname	225
+#define __NR_getpeername	226
+#define __NR_socketpair		227
+#define __NR_send		228
+#define __NR_sendto		229
+#define __NR_recv		230
+#define __NR_recvfrom		231
+#define __NR_shutdown		232
+#define __NR_setsockopt		233
+#define __NR_getsockopt		234
+#define __NR_sendmsg		235
+#define __NR_recvmsg		236
+
+/* Non-multiplexed IPC family */
+#define __NR_semop		237
+#define __NR_semget		238
+#define __NR_semctl		239
+#define __NR_msgsnd		240
+#define __NR_msgrcv		241
+#define __NR_msgget		242
+#define __NR_msgctl		243
+#if 0
+#define __NR_shmatcall		244
+#endif
+#define __NR_shmdt		245
+#define __NR_shmget		246
+#define __NR_shmctl		247
+
+#define __NR_getdents64		248
+#define __NR_fcntl64		249
+/* 223 is unused */
+#define __NR_gettid		252
+#define __NR_readahead		253
+#define __NR_setxattr		254
+#define __NR_lsetxattr		255
+#define __NR_fsetxattr		256
+#define __NR_getxattr		257
+#define __NR_lgetxattr		258
+#define __NR_fgetxattr		269
+#define __NR_listxattr		260
+#define __NR_llistxattr		261
+#define __NR_flistxattr		262
+#define __NR_removexattr	263
+#define __NR_lremovexattr	264
+#define __NR_fremovexattr	265
+#define __NR_tkill		266
+#define __NR_sendfile64		267
+#define __NR_futex		268
+#define __NR_sched_setaffinity	269
+#define __NR_sched_getaffinity	270
+#define __NR_set_thread_area	271
+#define __NR_get_thread_area	272
+#define __NR_io_setup		273
+#define __NR_io_destroy		274
+#define __NR_io_getevents	275
+#define __NR_io_submit		276
+#define __NR_io_cancel		277
+#define __NR_fadvise64		278
+#define __NR_exit_group		280
+
+#define __NR_lookup_dcookie	281
+#define __NR_epoll_create	282
+#define __NR_epoll_ctl		283
+#define __NR_epoll_wait		284
+#define __NR_remap_file_pages	285
+#define __NR_set_tid_address	286
+#define __NR_timer_create	287
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		296
+#define __NR_fstatfs64		297
+#define __NR_tgkill		298
+#define __NR_utimes		299
+#define __NR_fadvise64_64	300
+#define __NR_vserver		301
+#define __NR_mbind              302
+#define __NR_get_mempolicy      303
+#define __NR_set_mempolicy      304
+#define __NR_mq_open            305
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load		311
+#define __NR_waitid		312
+#define __NR_add_key		313
+#define __NR_request_key	314
+#define __NR_keyctl		315
+#define __NR_ioprio_set		316
+#define __NR_ioprio_get		317
+#define __NR_inotify_init	318
+#define __NR_inotify_add_watch	319
+#define __NR_inotify_rm_watch	320
+/* 321 is unused */
+#define __NR_migrate_pages	322
+#define __NR_openat		323
+#define __NR_mkdirat		324
+#define __NR_mknodat		325
+#define __NR_fchownat		326
+#define __NR_futimesat		327
+#define __NR_fstatat64		328
+#define __NR_unlinkat		329
+#define __NR_renameat		330
+#define __NR_linkat		331
+#define __NR_symlinkat		332
+#define __NR_readlinkat		333
+#define __NR_fchmodat		334
+#define __NR_faccessat		335
+#define __NR_pselect6		336
+#define __NR_ppoll		337
+#define __NR_unshare		338
+#define __NR_set_robust_list	339
+#define __NR_get_robust_list	340
+#define __NR_splice		341
+#define __NR_sync_file_range	342
+#define __NR_tee		343
+#define __NR_vmsplice		344
+#define __NR_move_pages		345
+#define __NR_getcpu		346
+#define __NR_epoll_pwait	347
+#define __NR_utimensat		348
+#define __NR_signalfd		349
+#define __NR_timerfd_create	350
+#define __NR_eventfd		351
+#define __NR_fallocate		352
+#define __NR_timerfd_settime	353
+#define __NR_timerfd_gettime	354
+#define __NR_signalfd4		355
+#define __NR_eventfd2		356
+#define __NR_epoll_create1	357
+#define __NR_dup3		358
+#define __NR_pipe2		359
+#define __NR_inotify_init1	360
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 361
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h
new file mode 100644
index 00000000000..8fd3cf6c58d
--- /dev/null
+++ b/arch/sh/include/asm/user.h
@@ -0,0 +1,67 @@
+#ifndef __ASM_SH_USER_H
+#define __ASM_SH_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+struct user_fpu_struct {
+	unsigned long fp_regs[32];
+	unsigned int fpscr;
+};
+#else
+struct user_fpu_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+};
+#endif
+
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	struct user_fpu_struct fpu;	/* Math Co-processor registers  */
+	int u_fpvalid;		/* True if math co-processor being used */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	struct user_fpu_struct* u_fpstate;	/* Math Co-processor pointer */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __ASM_SH_USER_H */
diff --git a/arch/sh/include/asm/vga.h b/arch/sh/include/asm/vga.h
new file mode 100644
index 00000000000..06a5de8ace1
--- /dev/null
+++ b/arch/sh/include/asm/vga.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_VGA_H
+#define __ASM_SH_VGA_H
+
+/* Stupid drivers. */
+
+#endif /* __ASM_SH_VGA_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
new file mode 100644
index 00000000000..f024fed00a7
--- /dev/null
+++ b/arch/sh/include/asm/watchdog.h
@@ -0,0 +1,107 @@
+/*
+ * include/asm-sh/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_WATCHDOG_H
+#define __ASM_SH_WATCHDOG_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <cpu/watchdog.h>
+#include <asm/io.h>
+
+/* 
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
+ */
+#ifndef WTCNT_R
+#  define WTCNT_R	WTCNT
+#endif
+
+#ifndef WTCSR_R
+#  define WTCSR_R	WTCSR
+#endif
+
+#define WTCNT_HIGH	0x5a
+#define WTCSR_HIGH	0xa5
+
+#define WTCSR_CKS2	0x04
+#define WTCSR_CKS1	0x02
+#define WTCSR_CKS0	0x01
+
+/*
+ * CKS0-2 supports a number of clock division ratios. At the time the watchdog
+ * is enabled, it defaults to a 41 usec overflow period .. we overload this to
+ * something a little more reasonable, and really can't deal with anything
+ * lower than WTCSR_CKS_1024, else we drop back into the usec range.
+ *
+ * Clock Division Ratio         Overflow Period
+ * --------------------------------------------
+ *     1/32 (initial value)       41 usecs
+ *     1/64                       82 usecs
+ *     1/128                     164 usecs
+ *     1/256                     328 usecs
+ *     1/512                     656 usecs
+ *     1/1024                   1.31 msecs
+ *     1/2048                   2.62 msecs
+ *     1/4096                   5.25 msecs
+ */
+#define WTCSR_CKS_32	0x00
+#define WTCSR_CKS_64	0x01
+#define WTCSR_CKS_128	0x02
+#define WTCSR_CKS_256	0x03
+#define WTCSR_CKS_512	0x04
+#define WTCSR_CKS_1024	0x05
+#define WTCSR_CKS_2048	0x06
+#define WTCSR_CKS_4096	0x07
+
+/**
+ * 	sh_wdt_read_cnt - Read from Counter
+ * 	Reads back the WTCNT value.
+ */
+static inline __u8 sh_wdt_read_cnt(void)
+{
+	return ctrl_inb(WTCNT_R);
+}
+
+/**
+ *	sh_wdt_write_cnt - Write to Counter
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u8 val)
+{
+	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
+}
+
+/**
+ * 	sh_wdt_read_csr - Read from Control/Status Register
+ *
+ *	Reads back the WTCSR value.
+ */
+static inline __u8 sh_wdt_read_csr(void)
+{
+	return ctrl_inb(WTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Control/Status Register
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u8 val)
+{
+	ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h
new file mode 100644
index 00000000000..c82eb12a5b1
--- /dev/null
+++ b/arch/sh/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/sh/include/cpu-common/cpu/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
new file mode 100644
index 00000000000..2b9ab93efa4
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/addrspace.h
@@ -0,0 +1,19 @@
+/*
+ * Definitions for the address spaces of the SH-2 CPUs.
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_ADDRSPACE_H
+#define __ASM_CPU_SH2_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+#endif /* __ASM_CPU_SH2_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
new file mode 100644
index 00000000000..c3db00b7360
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh2/cacheflush.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
+#define __ASM_CPU_SH2_CACHEFLUSH_H
+
+/*
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-common/cpu/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
new file mode 100644
index 00000000000..beeb299e01e
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/mmu_context.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh2/mmu_context.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H
+#define __ASM_CPU_SH2_MMU_CONTEXT_H
+
+/* No MMU */
+
+#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */
+
diff --git a/arch/sh/include/cpu-common/cpu/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
new file mode 100644
index 00000000000..39e2d6e9478
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/rtc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_CPU_SH2_RTC_H
+#define __ASM_SH_CPU_SH2_RTC_H
+
+#define rtc_reg_size		sizeof(u16)
+#define RTC_BIT_INVERTED	0
+#define RTC_DEF_CAPABILITIES	0UL
+
+#endif /* __ASM_SH_CPU_SH2_RTC_H */
diff --git a/arch/sh/include/cpu-common/cpu/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
new file mode 100644
index 00000000000..fe5c15dd6e8
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/sigcontext.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_CPU_SH2_SIGCONTEXT_H
+#define __ASM_CPU_SH2_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+};
+
+#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-common/cpu/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
new file mode 100644
index 00000000000..a39c241e819
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/timer.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_CPU_SH2_TIMER_H
+#define __ASM_CPU_SH2_TIMER_H
+
+/* Nothing needed yet */
+
+#endif /* __ASM_CPU_SH2_TIMER_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
new file mode 100644
index 00000000000..673515bc413
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh2/cache.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHE_H
+#define __ASM_CPU_SH2_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define CCR		0xffffffec
+
+#define CCR_CACHE_CE	0x01	/* Cache enable */
+#define CCR_CACHE_WT	0x02    /* CCR[bit1=1,bit2=1] */
+				/* 0x00000000-0x7fffffff: Write-through  */
+				/* 0x80000000-0x9fffffff: Write-back     */
+                                /* 0xc0000000-0xdfffffff: Write-through  */
+#define CCR_CACHE_CB	0x04    /* CCR[bit1=0,bit2=0] */
+				/* 0x00000000-0x7fffffff: Write-back     */
+				/* 0x80000000-0x9fffffff: Write-through  */
+                                /* 0xc0000000-0xdfffffff: Write-back     */
+#define CCR_CACHE_CF	0x08	/* Cache invalidate */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_DATA_ARRAY	0xf1000000
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#endif
+
+#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h
new file mode 100644
index 00000000000..d66b43cdc63
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/dma.h
@@ -0,0 +1,23 @@
+/*
+ * Definitions for the SH-2 DMAC.
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_DMA_H
+#define __ASM_CPU_SH2_DMA_H
+
+#define SH_MAX_DMA_CHANNELS	2
+
+#define SAR	((unsigned long[]){ 0xffffff80, 0xffffff90 })
+#define DAR	((unsigned long[]){ 0xffffff84, 0xffffff94 })
+#define DMATCR	((unsigned long[]){ 0xffffff88, 0xffffff98 })
+#define CHCR	((unsigned long[]){ 0xfffffffc, 0xffffff9c })
+
+#define DMAOR	0xffffffb0
+
+#endif /* __ASM_CPU_SH2_DMA_H */
+
diff --git a/arch/sh/include/cpu-sh2/cpu/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
new file mode 100644
index 00000000000..31de475da70
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/cpu-sh2/freq.h
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_FREQ_H
+#define __ASM_CPU_SH2_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define FREQCR	0xf815ff80
+#endif
+
+#endif /* __ASM_CPU_SH2_FREQ_H */
+
diff --git a/arch/sh/include/cpu-sh2/cpu/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
new file mode 100644
index 00000000000..ba0e87f19c7
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/ubc.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-sh/cpu-sh2/ubc.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_UBC_H
+#define __ASM_CPU_SH2_UBC_H
+
+#define UBC_BARA                0xffffff40
+#define UBC_BAMRA               0xffffff44
+#define UBC_BBRA                0xffffff48
+#define UBC_BARB                0xffffff60
+#define UBC_BAMRB               0xffffff64
+#define UBC_BBRB                0xffffff68
+#define UBC_BDRB                0xffffff70
+#define UBC_BDMRB               0xffffff74
+#define UBC_BRCR                0xffffff78
+
+/*
+ * We don't have any ASID changes to make in the UBC on the SH-2.
+ *
+ * Make these purposely invalid to track misuse.
+ */
+#define UBC_BASRA		0x00000000
+#define UBC_BASRB		0x00000000
+
+#endif /* __ASM_CPU_SH2_UBC_H */
+
diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
new file mode 100644
index 00000000000..393161c9c6d
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-sh/cpu-sh2/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_WATCHDOG_H
+#define __ASM_CPU_SH2_WATCHDOG_H
+
+/*
+ * More SH-2 brilliance .. its not good enough that we can't read
+ * and write the same sizes to WTCNT, now we have to read and write
+ * with different sizes at different addresses for WTCNT _and_ RSTCSR.
+ *
+ * At least on the bright side no one has managed to screw over WTCSR
+ * in this fashion .. yet.
+ */
+/* Register definitions */
+#define WTCNT		0xfffffe80
+#define WTCSR		0xfffffe80
+#define RSTCSR		0xfffffe82
+
+#define WTCNT_R		(WTCNT + 1)
+#define RSTCSR_R	(RSTCSR + 1)
+
+/* Bit definitions */
+#define WTCSR_IOVF	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_TME	0x20
+#define WTCSR_RSTS	0x00
+
+#define RSTCSR_RSTS	0x20
+
+/**
+ * 	sh_wdt_read_rstcsr - Read from Reset Control/Status Register
+ *
+ *	Reads back the RSTCSR value.
+ */
+static inline __u8 sh_wdt_read_rstcsr(void)
+{
+	/*
+	 * Same read/write brain-damage as for WTCNT here..
+	 */
+	return ctrl_inb(RSTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Reset Control/Status Register
+ *
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_rstcsr(__u8 val)
+{
+	/*
+	 * Note: Due to the brain-damaged nature of this register,
+	 * we can't presently touch the WOVF bit, since the upper byte
+	 * has to be swapped for this. So just leave it alone..
+	 */
+	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
+}
+
+#endif /* __ASM_CPU_SH2_WATCHDOG_H */
+
diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
new file mode 100644
index 00000000000..31eb4b58aa6
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
+#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x00000000
+#define P2SEG		0x20000000
+#define P3SEG		0x40000000
+#define P4SEG		0x60000000
+
+#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
new file mode 100644
index 00000000000..defb0baa5a0
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh2a/cache.h
+ *
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_CACHE_H
+#define __ASM_CPU_SH2A_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define CCR		0xfffc1000 /* CCR1 */
+#define CCR2		0xfffc1004
+
+/*
+ * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
+ * listed here are reserved.
+ */
+#define CCR_CACHE_CB	0x0000	/* Hack */
+#define CCR_CACHE_OCE	0x0001
+#define CCR_CACHE_WT	0x0002
+#define CCR_CACHE_OCI	0x0008	/* OCF */
+#define CCR_CACHE_ICE	0x0100
+#define CCR_CACHE_ICI	0x0800	/* ICF */
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf0800000
+
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE | CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI | CCR_CACHE_ICI)
+#define CCR_ICACHE_INVALIDATE	CCR_CACHE_ICI
+#define CCR_OCACHE_INVALIDATE	CCR_CACHE_OCI
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
new file mode 100644
index 00000000000..3d3b9205d2a
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H
+#define __ASM_CPU_SH2A_CACHEFLUSH_H
+
+/* 
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+void flush_icache_range(unsigned long start, unsigned long end);
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h
new file mode 100644
index 00000000000..27a13ef4fdf
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/dma.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/dma.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
new file mode 100644
index 00000000000..830fd43b6cd
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/freq.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh2a/freq.h
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_FREQ_H
+#define __ASM_CPU_SH2A_FREQ_H
+
+#define FREQCR	0xfffe0010
+
+#endif /* __ASM_CPU_SH2A_FREQ_H */
+
diff --git a/arch/sh/include/cpu-sh2a/cpu/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
new file mode 100644
index 00000000000..afb511e2bed
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_CPU_SH2A_RTC_H
+#define __ASM_SH_CPU_SH2A_RTC_H
+
+#define rtc_reg_size		sizeof(u16)
+#define RTC_BIT_INVERTED	0
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH2A_RTC_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
new file mode 100644
index 00000000000..8ce2fc1cf62
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/ubc.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
new file mode 100644
index 00000000000..e7e8259e468
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/watchdog.h>
diff --git a/arch/sh/include/cpu-sh3/cpu/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
new file mode 100644
index 00000000000..b289e3ca19a
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/adc.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_CPU_SH3_ADC_H
+#define __ASM_CPU_SH3_ADC_H
+
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+
+#define ADDRAH	0xa4000080
+#define ADDRAL	0xa4000082
+#define ADDRBH	0xa4000084
+#define ADDRBL	0xa4000086
+#define ADDRCH	0xa4000088
+#define ADDRCL	0xa400008a
+#define ADDRDH	0xa400008c
+#define ADDRDL	0xa400008e
+#define ADCSR	0xa4000090
+
+#define ADCSR_ADF	0x80
+#define ADCSR_ADIE	0x40
+#define ADCSR_ADST	0x20
+#define ADCSR_MULTI	0x10
+#define ADCSR_CKS	0x08
+#define ADCSR_CH_MASK	0x07
+
+#define ADCR	0xa4000092
+
+#endif /* __ASM_CPU_SH3_ADC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
new file mode 100644
index 00000000000..bee2d81c56b
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh3/cache.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHE_H
+#define __ASM_CPU_SH3_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define CCR		0xffffffec	/* Address of Cache Control Register */
+
+#define CCR_CACHE_CE	0x01	/* Cache Enable */
+#define CCR_CACHE_WT	0x02	/* Write-Through (for P0,U0,P3) (else writeback) */
+#define CCR_CACHE_CB	0x04	/* Write-Back (for P1) (else writethrough) */
+#define CCR_CACHE_CF	0x08	/* Cache Flush */
+#define CCR_CACHE_ORA	0x20	/* RAM mode */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define CCR3_REG	0xa40000b4
+#define CCR_CACHE_16KB  0x00010000
+#define CCR_CACHE_32KB	0x00020000
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHE_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
new file mode 100644
index 00000000000..1ac27aae670
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -0,0 +1,46 @@
+/*
+ * include/asm-sh/cpu-sh3/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
+#define __ASM_CPU_SH3_CACHEFLUSH_H
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
+ * SH4. Unlike the SH4 this is a unified cache so we need to do some work
+ * in mmap when 'exec'ing a new binary
+ */
+ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
+#define CACHE_ALIAS 0x00001000
+
+#define PG_mapped	PG_arch_1
+
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+                              unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+/* SH3 has unified cache so no special action needed here */
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+
+#else
+#include <cpu-common/cpu/cacheflush.h>
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
new file mode 100644
index 00000000000..05fda8316eb
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/dac.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_CPU_SH3_DAC_H
+#define __ASM_CPU_SH3_DAC_H
+
+/*
+ * Copyright (C) 2003  Andriy Skulysh
+ */
+
+
+#define DADR0	0xa40000a0
+#define DADR1	0xa40000a2
+#define DACR	0xa40000a4
+#define DACR_DAOE1	0x80
+#define DACR_DAOE0	0x40
+#define DACR_DAE	0x20
+
+
+static __inline__ void sh_dac_enable(int channel)
+{
+	unsigned char v;
+	v = ctrl_inb(DACR);
+	if(channel) v |= DACR_DAOE1;
+	else v |= DACR_DAOE0;
+	ctrl_outb(v,DACR);
+}
+
+static __inline__ void sh_dac_disable(int channel)
+{
+	unsigned char v;
+	v = ctrl_inb(DACR);
+	if(channel) v &= ~DACR_DAOE1;
+	else v &= ~DACR_DAOE0;
+	ctrl_outb(v,DACR);
+}
+
+static __inline__ void sh_dac_output(u8 value, int channel)
+{
+	if(channel) ctrl_outb(value,DADR1);
+	else ctrl_outb(value,DADR0);
+}
+
+#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
new file mode 100644
index 00000000000..6813c3220a1
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_CPU_SH3_DMA_H
+#define __ASM_CPU_SH3_DMA_H
+
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define SH_DMAC_BASE	0xa4010020
+#else
+#define SH_DMAC_BASE	0xa4000020
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define DMTE0_IRQ	48
+#define DMTE1_IRQ	49
+#define DMTE2_IRQ	50
+#define DMTE3_IRQ	51
+#define DMTE4_IRQ	76
+#define DMTE5_IRQ	77
+#endif
+
+/* Definitions for the SuperH DMAC */
+#define TM_BURST	0x00000020
+#define TS_8		0x00000000
+#define TS_16		0x00000008
+#define TS_32		0x00000010
+#define TS_128		0x00000018
+
+#define CHCR_TS_MASK	0x18
+#define CHCR_TS_SHIFT	3
+
+#define DMAOR_INIT	DMAOR_DME
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ */
+enum {
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_128BIT,
+};
+
+static unsigned int ts_shift[] __maybe_unused = {
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_128BIT]	= 4,
+};
+
+#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
new file mode 100644
index 00000000000..53c62302b2e
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/freq.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-sh/cpu-sh3/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_FREQ_H
+#define __ASM_CPU_SH3_FREQ_H
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7712
+#define FRQCR			0xA415FF80
+#else
+#define FRQCR			0xffffff80
+#endif
+
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		4
+
+#define FRQCR_CKOEN	0x0100
+#define FRQCR_PLLEN	0x0080
+#define FRQCR_PSTBY	0x0040
+
+#endif /* __ASM_CPU_SH3_FREQ_H */
+
diff --git a/arch/sh/include/cpu-sh3/cpu/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
new file mode 100644
index 00000000000..4e53eb314b8
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/gpio.h
@@ -0,0 +1,67 @@
+/*
+ *  include/asm-sh/cpu-sh3/gpio.h
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _CPU_SH3_GPIO_H
+#define _CPU_SH3_GPIO_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+
+/* Control registers */
+#define PORT_PACR	0xA4050100UL
+#define PORT_PBCR	0xA4050102UL
+#define PORT_PCCR	0xA4050104UL
+#define PORT_PDCR	0xA4050106UL
+#define PORT_PECR	0xA4050108UL
+#define PORT_PFCR	0xA405010AUL
+#define PORT_PGCR	0xA405010CUL
+#define PORT_PHCR	0xA405010EUL
+#define PORT_PJCR	0xA4050110UL
+#define PORT_PKCR	0xA4050112UL
+#define PORT_PLCR	0xA4050114UL
+#define PORT_PMCR	0xA4050116UL
+#define PORT_PPCR	0xA4050118UL
+#define PORT_PRCR	0xA405011AUL
+#define PORT_PSCR	0xA405011CUL
+#define PORT_PTCR	0xA405011EUL
+#define PORT_PUCR	0xA4050120UL
+#define PORT_PVCR	0xA4050122UL
+
+/* Data registers */
+#define PORT_PADR	0xA4050140UL
+/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */
+#define PORT_PBDR	0xA4050142UL
+#define PORT_PCDR	0xA4050144UL
+#define PORT_PDDR	0xA4050146UL
+#define PORT_PEDR	0xA4050148UL
+#define PORT_PFDR	0xA405014AUL
+#define PORT_PGDR	0xA405014CUL
+#define PORT_PHDR	0xA405014EUL
+#define PORT_PJDR	0xA4050150UL
+#define PORT_PKDR	0xA4050152UL
+#define PORT_PLDR	0xA4050154UL
+#define PORT_PMDR	0xA4050156UL
+#define PORT_PPDR	0xA4050158UL
+#define PORT_PRDR	0xA405015AUL
+#define PORT_PSDR	0xA405015CUL
+#define PORT_PTDR	0xA405015EUL
+#define PORT_PUDR	0xA4050160UL
+#define PORT_PVDR	0xA4050162UL
+
+/* Pin Select Registers */
+#define PORT_PSELA	0xA4050124UL
+#define PORT_PSELB	0xA4050126UL
+#define PORT_PSELC	0xA4050128UL
+#define PORT_PSELD	0xA405012AUL
+
+#endif
+
+#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
new file mode 100644
index 00000000000..ab09da73ce7
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh3/mmu_context.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H
+#define __ASM_CPU_SH3_MMU_CONTEXT_H
+
+#define MMU_PTEH	0xFFFFFFF0	/* Page table entry register HIGH */
+#define MMU_PTEL	0xFFFFFFF4	/* Page table entry register LOW */
+#define MMU_TTB		0xFFFFFFF8	/* Translation table base register */
+#define MMU_TEA		0xFFFFFFFC	/* TLB Exception Address */
+
+#define MMUCR		0xFFFFFFE0	/* MMU Control Register */
+
+#define MMU_TLB_ADDRESS_ARRAY	0xF2000000
+#define MMU_PAGE_ASSOC_BIT	0x80
+
+#define MMU_NTLB_ENTRIES	128	/* for 7708 */
+#define MMU_NTLB_WAYS		4
+#define MMU_CONTROL_INIT	0x007	/* SV=0, TF=1, IX=1, AT=1 */
+
+#define TRA	0xffffffd0
+#define EXPEVT	0xffffffd4
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7712) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define INTEVT	0xa4000000	/* INTEVTE2(0xa4000000) */
+#else
+#define INTEVT	0xffffffd8
+#endif
+
+#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
+
diff --git a/arch/sh/include/cpu-sh3/cpu/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h
new file mode 100644
index 00000000000..793acf12aa0
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/timer.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-sh/cpu-sh3/timer.h
+ *
+ * Copyright (C) 2004 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_TIMER_H
+#define __ASM_CPU_SH3_TIMER_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * TMU Common definitions for SH3 processors
+ *	SH7706
+ *	SH7709S
+ *	SH7727
+ *	SH7729R
+ *	SH7710
+ *	SH7720
+ *	SH7710
+ * ---------------------------------------------------------------------------
+ */
+
+#if  !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define TMU_TOCR	0xfffffe90	/* Byte access */
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define TMU_012_TSTR	0xa412fe92	/* Byte access */
+
+#define TMU0_TCOR	0xa412fe94	/* Long access */
+#define TMU0_TCNT	0xa412fe98	/* Long access */
+#define TMU0_TCR	0xa412fe9c	/* Word access */
+
+#define TMU1_TCOR	0xa412fea0	/* Long access */
+#define TMU1_TCNT	0xa412fea4	/* Long access */
+#define TMU1_TCR	0xa412fea8	/* Word access */
+
+#define TMU2_TCOR	0xa412feac	/* Long access */
+#define TMU2_TCNT	0xa412feb0	/* Long access */
+#define TMU2_TCR	0xa412feb4	/* Word access */
+
+#else
+#define TMU_012_TSTR	0xfffffe92	/* Byte access */
+
+#define TMU0_TCOR	0xfffffe94	/* Long access */
+#define TMU0_TCNT	0xfffffe98	/* Long access */
+#define TMU0_TCR	0xfffffe9c	/* Word access */
+
+#define TMU1_TCOR	0xfffffea0	/* Long access */
+#define TMU1_TCNT	0xfffffea4	/* Long access */
+#define TMU1_TCR	0xfffffea8	/* Word access */
+
+#define TMU2_TCOR	0xfffffeac	/* Long access */
+#define TMU2_TCNT	0xfffffeb0	/* Long access */
+#define TMU2_TCR	0xfffffeb4	/* Word access */
+#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define TMU2_TCPR2	0xfffffeb8	/* Long access */
+#endif
+#endif
+
+#endif /* __ASM_CPU_SH3_TIMER_H */
+
diff --git a/arch/sh/include/cpu-sh3/cpu/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
new file mode 100644
index 00000000000..4e6381d5ff7
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/ubc.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-sh/cpu-sh3/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_UBC_H
+#define __ASM_CPU_SH3_UBC_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define UBC_BARA		0xa4ffffb0
+#define UBC_BAMRA		0xa4ffffb4
+#define UBC_BBRA		0xa4ffffb8
+#define UBC_BASRA		0xffffffe4
+#define UBC_BARB		0xa4ffffa0
+#define UBC_BAMRB		0xa4ffffa4
+#define UBC_BBRB		0xa4ffffa8
+#define UBC_BASRB		0xffffffe8
+#define UBC_BDRB		0xa4ffff90
+#define UBC_BDMRB		0xa4ffff94
+#define UBC_BRCR		0xa4ffff98
+#else
+#define UBC_BARA                0xffffffb0
+#define UBC_BAMRA               0xffffffb4
+#define UBC_BBRA                0xffffffb8
+#define UBC_BASRA               0xffffffe4
+#define UBC_BARB                0xffffffa0
+#define UBC_BAMRB               0xffffffa4
+#define UBC_BBRB                0xffffffa8
+#define UBC_BASRB               0xffffffe8
+#define UBC_BDRB                0xffffff90
+#define UBC_BDMRB               0xffffff94
+#define UBC_BRCR                0xffffff98
+#endif
+
+#endif /* __ASM_CPU_SH3_UBC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
new file mode 100644
index 00000000000..4ee0347298d
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/cpu-sh3/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_WATCHDOG_H
+#define __ASM_CPU_SH3_WATCHDOG_H
+
+/* Register definitions */
+#define WTCNT		0xffffff84
+#define WTCSR		0xffffff86
+
+/* Bit definitions */
+#define WTCSR_TME	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_RSTS	0x20
+#define WTCSR_WOVF	0x10
+#define WTCSR_IOVF	0x08
+
+#endif /* __ASM_CPU_SH3_WATCHDOG_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
new file mode 100644
index 00000000000..a3fa733c1c7
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH-4 CPUs.
+ */
+#ifndef __ASM_CPU_SH4_ADDRSPACE_H
+#define __ASM_CPU_SH4_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+/* Detailed P4SEG  */
+#define P4SEG_STORE_QUE	(P4SEG)
+#define P4SEG_IC_ADDR	0xf0000000
+#define P4SEG_IC_DATA	0xf1000000
+#define P4SEG_ITLB_ADDR	0xf2000000
+#define P4SEG_ITLB_DATA	0xf3000000
+#define P4SEG_OC_ADDR	0xf4000000
+#define P4SEG_OC_DATA	0xf5000000
+#define P4SEG_TLB_ADDR	0xf6000000
+#define P4SEG_TLB_DATA	0xf7000000
+#define P4SEG_REG_BASE	0xff000000
+
+#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
+#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
+
+#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
new file mode 100644
index 00000000000..1c61ebf5c8e
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/cache.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-sh/cpu-sh4/cache.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHE_H
+#define __ASM_CPU_SH4_CACHE_H
+
+#define L1_CACHE_SHIFT	5
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define CCR		0xff00001c	/* Address of Cache Control Register */
+#define CCR_CACHE_OCE	0x0001	/* Operand Cache Enable */
+#define CCR_CACHE_WT	0x0002	/* Write-Through (for P0,U0,P3) (else writeback)*/
+#define CCR_CACHE_CB	0x0004	/* Copy-Back (for P1) (else writethrough) */
+#define CCR_CACHE_OCI	0x0008	/* OC Invalidate */
+#define CCR_CACHE_ORA	0x0020	/* OC RAM Mode */
+#define CCR_CACHE_OIX	0x0080	/* OC Index Enable */
+#define CCR_CACHE_ICE	0x0100	/* Instruction Cache Enable */
+#define CCR_CACHE_ICI	0x0800	/* IC Invalidate */
+#define CCR_CACHE_IIX	0x8000	/* IC Index Enable */
+#ifndef CONFIG_CPU_SH4A
+#define CCR_CACHE_EMODE	0x80000000	/* EMODE Enable */
+#endif
+
+/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE|CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI|CCR_CACHE_ICI)
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf4000000
+
+#endif /* __ASM_CPU_SH4_CACHE_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
new file mode 100644
index 00000000000..065306d376e
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh4/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
+#define __ASM_CPU_SH4_CACHEFLUSH_H
+
+/*
+ *  Caches are broken on SH-4 (unless we use write-through
+ *  caching; in which case they're only semi-broken),
+ *  so we need them.
+ */
+void flush_cache_all(void);
+void flush_dcache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		       unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
+		      unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+			     unsigned long addr, int len);
+
+#define flush_icache_page(vma,pg)		do { } while (0)
+
+/* Initialization of P3 area for copy_user_page */
+void p3_cache_init(void);
+
+#define PG_mapped	PG_arch_1
+
+#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
new file mode 100644
index 00000000000..71b426a6e48
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
+#define __ASM_SH_CPU_SH4_DMA_SH7780_H
+
+#define REQ_HE	0x000000C0
+#define REQ_H	0x00000080
+#define REQ_LE	0x00000040
+#define TM_BURST 0x0000020
+#define TS_8	0x00000000
+#define TS_16	0x00000008
+#define TS_32	0x00000010
+#define TS_16BLK	0x00000018
+#define TS_32BLK	0x00100000
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_128BIT,
+	XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __maybe_unused = {
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_128BIT]	= 4,
+	[XMIT_SZ_256BIT]	= 5,
+};
+
+#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
new file mode 100644
index 00000000000..235b7cd1fc9
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -0,0 +1,65 @@
+#ifndef __ASM_CPU_SH4_DMA_H
+#define __ASM_CPU_SH4_DMA_H
+
+#define DMAOR_INIT	( 0x8000 | DMAOR_DME )
+
+/* SH7751/7760/7780 DMA IRQ sources */
+#define DMTE0_IRQ	34
+#define DMTE1_IRQ	35
+#define DMTE2_IRQ	36
+#define DMTE3_IRQ	37
+#define DMTE4_IRQ	44
+#define DMTE5_IRQ	45
+#define DMTE6_IRQ	46
+#define DMTE7_IRQ	47
+#define DMAE_IRQ	38
+
+#ifdef CONFIG_CPU_SH4A
+#define SH_DMAC_BASE	0xfc808020
+
+#define CHCR_TS_MASK	0x18
+#define CHCR_TS_SHIFT	3
+
+#include <cpu/dma-sh7780.h>
+#else
+#define SH_DMAC_BASE	0xffa00000
+
+/* Definitions for the SuperH DMAC */
+#define TM_BURST	0x0000080
+#define TS_8		0x00000010
+#define TS_16		0x00000020
+#define TS_32		0x00000030
+#define TS_64		0x00000000
+
+#define CHCR_TS_MASK	0x70
+#define CHCR_TS_SHIFT	4
+
+#define DMAOR_COD	0x00000008
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+	XMIT_SZ_64BIT,
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __maybe_unused = {
+	[XMIT_SZ_64BIT]		= 3,
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_256BIT]	= 5,
+};
+#endif
+
+#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
new file mode 100644
index 00000000000..febef734252
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/fpu.h
@@ -0,0 +1,32 @@
+/*
+ * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h
+ *
+ * Copyright (C) 2006 STMicroelectronics Limited
+ * Author: Carl Shaw <carl.shaw@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License Version 2.  See linux/COPYING for more information.
+ *
+ * Definitions for SH4 FPU operations
+ */
+
+#ifndef __CPU_SH4_FPU_H
+#define __CPU_SH4_FPU_H
+
+#define FPSCR_ENABLE_MASK	0x00000f80UL
+
+#define FPSCR_FMOV_DOUBLE	(1<<1)
+
+#define FPSCR_CAUSE_INEXACT	(1<<12)
+#define FPSCR_CAUSE_UNDERFLOW	(1<<13)
+#define FPSCR_CAUSE_OVERFLOW	(1<<14)
+#define FPSCR_CAUSE_DIVZERO	(1<<15)
+#define FPSCR_CAUSE_INVALID	(1<<16)
+#define FPSCR_CAUSE_ERROR 	(1<<17)
+
+#define FPSCR_DBL_PRECISION	(1<<19)
+#define FPSCR_ROUNDING_MODE(x)	((x >> 20) & 3)
+#define FPSCR_RM_NEAREST	(0)
+#define FPSCR_RM_ZERO		(1)
+
+#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
new file mode 100644
index 00000000000..c23af81c2e7
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh4/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_FREQ_H
+#define __ASM_CPU_SH4_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7366)
+#define FRQCR		        0xa4150000
+#define VCLKCR			0xa4150004
+#define SCLKACR			0xa4150008
+#define SCLKBCR			0xa415000c
+#define IrDACLKCR		0xa4150010
+#define MSTPCR0			0xa4150030
+#define MSTPCR1			0xa4150034
+#define MSTPCR2			0xa4150038
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define	FRQCR			0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define FRQCR0			0xffc80000
+#define FRQCR1			0xffc80004
+#define FRQMR1			0xffc80014
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+#define FRQCR			0xffc00014
+#else
+#define FRQCR			0xffc00000
+#define FRQCR_PSTBY		0x0200
+#define FRQCR_PLLEN		0x0400
+#define FRQCR_CKOEN		0x0800
+#endif
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		3
+
+#endif /* __ASM_CPU_SH4_FREQ_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
new file mode 100644
index 00000000000..9ea8eb27b18
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
@@ -0,0 +1,63 @@
+/*
+ * include/asm-sh/cpu-sh4/mmu_context.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H
+#define __ASM_CPU_SH4_MMU_CONTEXT_H
+
+#define MMU_PTEH	0xFF000000	/* Page table entry register HIGH */
+#define MMU_PTEL	0xFF000004	/* Page table entry register LOW */
+#define MMU_TTB		0xFF000008	/* Translation table base register */
+#define MMU_TEA		0xFF00000C	/* TLB Exception Address */
+#define MMU_PTEA	0xFF000034	/* Page table entry assistance register */
+
+#define MMUCR		0xFF000010	/* MMU Control Register */
+
+#define MMU_ITLB_ADDRESS_ARRAY	0xF2000000
+#define MMU_UTLB_ADDRESS_ARRAY	0xF6000000
+#define MMU_PAGE_ASSOC_BIT	0x80
+
+#define MMUCR_TI		(1<<2)
+
+#ifdef CONFIG_X2TLB
+#define MMUCR_ME		(1 << 7)
+#else
+#define MMUCR_ME		(0)
+#endif
+
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
+#define MMUCR_SE		(1 << 4)
+#else
+#define MMUCR_SE		(0)
+#endif
+
+#ifdef CONFIG_SH_STORE_QUEUES
+#define MMUCR_SQMD		(1 << 9)
+#else
+#define MMUCR_SQMD		(0)
+#endif
+
+#define MMU_NTLB_ENTRIES	64
+#define MMU_CONTROL_INIT	(0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE)
+
+#define MMU_ITLB_DATA_ARRAY	0xF3000000
+#define MMU_UTLB_DATA_ARRAY	0xF7000000
+
+#define MMU_UTLB_ENTRIES	   64
+#define MMU_U_ENTRY_SHIFT	    8
+#define MMU_UTLB_VALID		0x100
+#define MMU_ITLB_ENTRIES	    4
+#define MMU_I_ENTRY_SHIFT	    8
+#define MMU_ITLB_VALID		0x100
+
+#define TRA	0xff000020
+#define EXPEVT	0xff000024
+#define INTEVT	0xff000028
+
+#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
new file mode 100644
index 00000000000..25b1e6adfe8
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/rtc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SH_CPU_SH4_RTC_H
+#define __ASM_SH_CPU_SH4_RTC_H
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7723
+#define rtc_reg_size		sizeof(u16)
+#else
+#define rtc_reg_size		sizeof(u32)
+#endif
+
+#define RTC_BIT_INVERTED	0x40	/* bug on SH7750, SH7750S */
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH4_RTC_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
new file mode 100644
index 00000000000..ab392f120e0
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_CPU_SH4_SIGCONTEXT_H
+#define __ASM_CPU_SH4_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+
+	/* FPU registers */
+	unsigned long sc_fpregs[16];
+	unsigned long sc_xfpregs[16];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpul;
+	unsigned int sc_ownedfp;
+};
+
+#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
new file mode 100644
index 00000000000..586d6491816
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sq.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-sh/cpu-sh4/sq.h
+ *
+ * Copyright (C) 2001, 2002, 2003  Paul Mundt
+ * Copyright (C) 2001, 2002  M. R. Brown
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_SQ_H
+#define __ASM_CPU_SH4_SQ_H
+
+#include <asm/addrspace.h>
+
+/*
+ * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
+ * mapped to any physical address space. Since data is written (and aligned)
+ * to 32-byte boundaries, we need to be sure that all allocations are aligned.
+ */
+#define SQ_SIZE                 32
+#define SQ_ALIGN_MASK           (~(SQ_SIZE - 1))
+#define SQ_ALIGN(addr)          (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
+
+#define SQ_QACR0		(P4SEG_REG_BASE  + 0x38)
+#define SQ_QACR1		(P4SEG_REG_BASE  + 0x3c)
+#define SQ_ADDRMAX              (P4SEG_STORE_QUE + 0x04000000)
+
+/* arch/sh/kernel/cpu/sh4/sq.c */
+unsigned long sq_remap(unsigned long phys, unsigned int size,
+		       const char *name, unsigned long flags);
+void sq_unmap(unsigned long vaddr);
+void sq_flush_range(unsigned long start, unsigned int len);
+
+#endif /* __ASM_CPU_SH4_SQ_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h
new file mode 100644
index 00000000000..d1e796b9688
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/timer.h
@@ -0,0 +1,60 @@
+/*
+ * include/asm-sh/cpu-sh4/timer.h
+ *
+ * Copyright (C) 2004 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_TIMER_H
+#define __ASM_CPU_SH4_TIMER_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * TMU Common definitions for SH4 processors
+ *	SH7750S/SH7750R
+ *	SH7751/SH7751R
+ *	SH7760
+ *	SH-X3
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+#define TMU_012_BASE	0xffc10000
+#define TMU_345_BASE	0xffc20000
+#else
+#define TMU_012_BASE	0xffd80000
+#define TMU_345_BASE	0xfe100000
+#endif
+
+#define TMU_TOCR	TMU_012_BASE	/* Not supported on all CPUs */
+
+#define TMU_012_TSTR	(TMU_012_BASE + 0x04)
+#define TMU_345_TSTR	(TMU_345_BASE + 0x04)
+
+#define TMU0_TCOR	(TMU_012_BASE + 0x08)
+#define TMU0_TCNT	(TMU_012_BASE + 0x0c)
+#define TMU0_TCR	(TMU_012_BASE + 0x10)
+
+#define TMU1_TCOR       (TMU_012_BASE + 0x14)
+#define TMU1_TCNT       (TMU_012_BASE + 0x18)
+#define TMU1_TCR        (TMU_012_BASE + 0x1c)
+
+#define TMU2_TCOR       (TMU_012_BASE + 0x20)
+#define TMU2_TCNT       (TMU_012_BASE + 0x24)
+#define TMU2_TCR	(TMU_012_BASE + 0x28)
+#define TMU2_TCPR	(TMU_012_BASE + 0x2c)
+
+#define TMU3_TCOR	(TMU_345_BASE + 0x08)
+#define TMU3_TCNT	(TMU_345_BASE + 0x0c)
+#define TMU3_TCR	(TMU_345_BASE + 0x10)
+
+#define TMU4_TCOR	(TMU_345_BASE + 0x14)
+#define TMU4_TCNT	(TMU_345_BASE + 0x18)
+#define TMU4_TCR	(TMU_345_BASE + 0x1c)
+
+#define TMU5_TCOR	(TMU_345_BASE + 0x20)
+#define TMU5_TCNT	(TMU_345_BASE + 0x24)
+#define TMU5_TCR	(TMU_345_BASE + 0x28)
+
+#endif /* __ASM_CPU_SH4_TIMER_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
new file mode 100644
index 00000000000..c86e1705093
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/ubc.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-sh/cpu-sh4/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_UBC_H
+#define __ASM_CPU_SH4_UBC_H
+
+#if defined(CONFIG_CPU_SH4A)
+#define UBC_CBR0		0xff200000
+#define UBC_CRR0		0xff200004
+#define UBC_CAR0		0xff200008
+#define UBC_CAMR0		0xff20000c
+#define UBC_CBR1		0xff200020
+#define UBC_CRR1		0xff200024
+#define UBC_CAR1		0xff200028
+#define UBC_CAMR1		0xff20002c
+#define UBC_CDR1		0xff200030
+#define UBC_CDMR1		0xff200034
+#define UBC_CETR1		0xff200038
+#define UBC_CCMFR		0xff200600
+#define UBC_CBCR		0xff200620
+
+/* CBR	*/
+#define UBC_CBR_AIE		(0x01<<30)
+#define UBC_CBR_ID_INST		(0x01<<4)
+#define UBC_CBR_RW_READ		(0x01<<1)
+#define UBC_CBR_CE		(0x01)
+
+#define	UBC_CBR_AIV_MASK	(0x00FF0000)
+#define	UBC_CBR_AIV_SHIFT	(16)
+#define UBC_CBR_AIV_SET(asid)	(((asid)<<UBC_CBR_AIV_SHIFT) & UBC_CBR_AIV_MASK)
+
+#define UBC_CBR_INIT		0x20000000
+
+/* CRR	*/
+#define UBC_CRR_RES		(0x01<<13)
+#define UBC_CRR_PCB		(0x01<<1)
+#define UBC_CRR_BIE		(0x01)
+
+#define UBC_CRR_INIT		0x00002000
+
+#else	/* CONFIG_CPU_SH4 */
+#define UBC_BARA		0xff200000
+#define UBC_BAMRA		0xff200004
+#define UBC_BBRA		0xff200008
+#define UBC_BASRA		0xff000014
+#define UBC_BARB		0xff20000c
+#define UBC_BAMRB		0xff200010
+#define UBC_BBRB		0xff200014
+#define UBC_BASRB		0xff000018
+#define UBC_BDRB		0xff200018
+#define UBC_BDMRB		0xff20001c
+#define UBC_BRCR		0xff200020
+#endif	/* CONFIG_CPU_SH4 */
+
+#endif /* __ASM_CPU_SH4_UBC_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
new file mode 100644
index 00000000000..259f6a0ce23
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/cpu-sh4/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_WATCHDOG_H
+#define __ASM_CPU_SH4_WATCHDOG_H
+
+/* Register definitions */
+#define WTCNT		0xffc00008
+#define WTCSR		0xffc0000c
+
+/* Bit definitions */
+#define WTCSR_TME	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_RSTS	0x20
+#define WTCSR_WOVF	0x10
+#define WTCSR_IOVF	0x08
+
+#endif /* __ASM_CPU_SH4_WATCHDOG_H */
+
diff --git a/arch/sh/include/cpu-sh5/cpu/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h
new file mode 100644
index 00000000000..dc36b9a03af
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/addrspace.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
+#define __ASM_SH_CPU_SH5_ADDRSPACE_H
+
+#define	PHYS_PERIPHERAL_BLOCK	0x09000000
+#define PHYS_DMAC_BLOCK		0x0e000000
+#define PHYS_PCI_BLOCK		0x60000000
+#define PHYS_EMI_BLOCK		0xff000000
+
+/* No segmentation.. */
+
+#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h
new file mode 100644
index 00000000000..ed050ab526f
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/cache.h
@@ -0,0 +1,97 @@
+#ifndef __ASM_SH_CPU_SH5_CACHE_H
+#define __ASM_SH_CPU_SH5_CACHE_H
+
+/*
+ * include/asm-sh/cpu-sh5/cache.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define L1_CACHE_SHIFT		5
+
+/* Valid and Dirty bits */
+#define SH_CACHE_VALID		(1LL<<0)
+#define SH_CACHE_UPDATED	(1LL<<57)
+
+/* Unimplemented compat bits.. */
+#define SH_CACHE_COMBINED	0
+#define SH_CACHE_ASSOC		0
+
+/* Cache flags */
+#define SH_CACHE_MODE_WT	(1LL<<0)
+#define SH_CACHE_MODE_WB	(1LL<<1)
+
+/*
+ * Control Registers.
+ */
+#define ICCR_BASE	0x01600000	/* Instruction Cache Control Register */
+#define ICCR_REG0	0		/* Register 0 offset */
+#define ICCR_REG1	1		/* Register 1 offset */
+#define ICCR0		ICCR_BASE+ICCR_REG0
+#define ICCR1		ICCR_BASE+ICCR_REG1
+
+#define ICCR0_OFF	0x0		/* Set ICACHE off */
+#define ICCR0_ON	0x1		/* Set ICACHE on */
+#define ICCR0_ICI	0x2		/* Invalidate all in IC */
+
+#define ICCR1_NOLOCK	0x0		/* Set No Locking */
+
+#define OCCR_BASE	0x01E00000	/* Operand Cache Control Register */
+#define OCCR_REG0	0		/* Register 0 offset */
+#define OCCR_REG1	1		/* Register 1 offset */
+#define OCCR0		OCCR_BASE+OCCR_REG0
+#define OCCR1		OCCR_BASE+OCCR_REG1
+
+#define OCCR0_OFF	0x0		/* Set OCACHE off */
+#define OCCR0_ON	0x1		/* Set OCACHE on */
+#define OCCR0_OCI	0x2		/* Invalidate all in OC */
+#define OCCR0_WT	0x4		/* Set OCACHE in WT Mode */
+#define OCCR0_WB	0x0		/* Set OCACHE in WB Mode */
+
+#define OCCR1_NOLOCK	0x0		/* Set No Locking */
+
+/*
+ * SH-5
+ * A bit of description here, for neff=32.
+ *
+ *                               |<--- tag  (19 bits) --->|
+ * +-----------------------------+-----------------+------+----------+------+
+ * |                             |                 | ways |set index |offset|
+ * +-----------------------------+-----------------+------+----------+------+
+ *                                ^                 2 bits   8 bits   5 bits
+ *                                +- Bit 31
+ *
+ * Cacheline size is based on offset: 5 bits = 32 bytes per line
+ * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG
+ * have a broader space for registers. These are outlined by
+ * CACHE_?C_*_STEP below.
+ *
+ */
+
+/* Instruction cache */
+#define CACHE_IC_ADDRESS_ARRAY 0x01000000
+
+/* Operand Cache */
+#define CACHE_OC_ADDRESS_ARRAY 0x01800000
+
+/* These declarations relate to cache 'synonyms' in the operand cache.  A
+   'synonym' occurs where effective address bits overlap between those used for
+   indexing the cache sets and those passed to the MMU for translation.  In the
+   case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */
+
+#define CACHE_OC_N_SYNBITS  1               /* Number of synonym bits */
+#define CACHE_OC_SYN_SHIFT  12
+/* Mask to select synonym bit(s) */
+#define CACHE_OC_SYN_MASK   (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)
+
+/*
+ * Instruction cache can't be invalidated based on physical addresses.
+ * No Instruction Cache defines required, then.
+ */
+
+#endif /* __ASM_SH_CPU_SH5_CACHE_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
new file mode 100644
index 00000000000..5a11f0b7e66
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_SH_CPU_SH5_CACHEFLUSH_H
+#define __ASM_SH_CPU_SH5_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+struct vm_area_struct;
+struct page;
+struct mm_struct;
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_sigtramp(unsigned long vaddr);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+			      unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+extern void flush_dcache_page(struct page *pg);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+
+#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_icache_page(vma, page)	do { } while (0)
+void p3_cache_init(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_CPU_SH5_CACHEFLUSH_H */
+
diff --git a/arch/sh/include/cpu-sh5/cpu/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h
new file mode 100644
index 00000000000..7bf6bb3d35e
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/dma.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_CPU_SH5_DMA_H
+#define __ASM_SH_CPU_SH5_DMA_H
+
+/* Nothing yet */
+
+#endif /* __ASM_SH_CPU_SH5_DMA_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
new file mode 100644
index 00000000000..f0f0756e6e8
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/irq.h
@@ -0,0 +1,117 @@
+#ifndef __ASM_SH_CPU_SH5_IRQ_H
+#define __ASM_SH_CPU_SH5_IRQ_H
+
+/*
+ * include/asm-sh/cpu-sh5/irq.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+
+/*
+ * Encoded IRQs are not considered worth to be supported.
+ * Main reason is that there's no per-encoded-interrupt
+ * enable/disable mechanism (as there was in SH3/4).
+ * An all enabled/all disabled is worth only if there's
+ * a cascaded IC to disable/enable/ack on. Until such
+ * IC is available there's no such support.
+ *
+ * Presumably Encoded IRQs may use extra IRQs beyond 64,
+ * below. Some logic must be added to cope with IRQ_IRL?
+ * in an exclusive way.
+ *
+ * Priorities are set at Platform level, when IRQ_IRL0-3
+ * are set to 0 Encoding is allowed. Otherwise it's not
+ * allowed.
+ */
+
+/* Independent IRQs */
+#define IRQ_IRL0	0
+#define IRQ_IRL1	1
+#define IRQ_IRL2	2
+#define IRQ_IRL3	3
+
+#define IRQ_INTA	4
+#define IRQ_INTB	5
+#define IRQ_INTC	6
+#define IRQ_INTD	7
+
+#define IRQ_SERR	12
+#define IRQ_ERR		13
+#define IRQ_PWR3	14
+#define IRQ_PWR2	15
+#define IRQ_PWR1	16
+#define IRQ_PWR0	17
+
+#define IRQ_DMTE0	18
+#define IRQ_DMTE1	19
+#define IRQ_DMTE2	20
+#define IRQ_DMTE3	21
+#define IRQ_DAERR	22
+
+#define IRQ_TUNI0	32
+#define IRQ_TUNI1	33
+#define IRQ_TUNI2	34
+#define IRQ_TICPI2	35
+
+#define IRQ_ATI		36
+#define IRQ_PRI		37
+#define IRQ_CUI		38
+
+#define IRQ_ERI		39
+#define IRQ_RXI		40
+#define IRQ_BRI		41
+#define IRQ_TXI		42
+
+#define IRQ_ITI		63
+
+#define NR_INTC_IRQS	64
+
+#ifdef CONFIG_SH_CAYMAN
+#define NR_EXT_IRQS     32
+#define START_EXT_IRQS  64
+
+/* PCI bus 2 uses encoded external interrupts on the Cayman board */
+#define IRQ_P2INTA      (START_EXT_IRQS + (3*8) + 0)
+#define IRQ_P2INTB      (START_EXT_IRQS + (3*8) + 1)
+#define IRQ_P2INTC      (START_EXT_IRQS + (3*8) + 2)
+#define IRQ_P2INTD      (START_EXT_IRQS + (3*8) + 3)
+
+#define I8042_KBD_IRQ	(START_EXT_IRQS + 2)
+#define I8042_AUX_IRQ	(START_EXT_IRQS + 6)
+
+#define IRQ_CFCARD	(START_EXT_IRQS + 7)
+#define IRQ_PCMCIA	(0)
+
+#else
+#define NR_EXT_IRQS	0
+#endif
+
+/* Default IRQs, fixed */
+#define TIMER_IRQ	IRQ_TUNI0
+#define RTC_IRQ		IRQ_CUI
+
+/* Default Priorities, Platform may choose differently */
+#define	NO_PRIORITY	0	/* Disabled */
+#define TIMER_PRIORITY	2
+#define RTC_PRIORITY	TIMER_PRIORITY
+#define SCIF_PRIORITY	3
+#define INTD_PRIORITY	3
+#define	IRL3_PRIORITY	4
+#define INTC_PRIORITY	6
+#define	IRL2_PRIORITY	7
+#define INTB_PRIORITY	9
+#define	IRL1_PRIORITY	10
+#define INTA_PRIORITY	12
+#define	IRL0_PRIORITY	13
+#define TOP_PRIORITY	15
+
+extern int intc_evt_to_irq[(0xE20/0x20)+1];
+int intc_irq_describe(char* p, int irq);
+extern int platform_int_priority[NR_INTC_IRQS];
+
+#endif /* __ASM_SH_CPU_SH5_IRQ_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
new file mode 100644
index 00000000000..68a1d2cff45
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H
+#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H
+
+/* Common defines */
+#define TLB_STEP	0x00000010
+#define TLB_PTEH	0x00000000
+#define TLB_PTEL	0x00000008
+
+/* PTEH defines */
+#define PTEH_ASID_SHIFT	2
+#define PTEH_VALID	0x0000000000000001
+#define PTEH_SHARED	0x0000000000000002
+#define PTEH_MATCH_ASID	0x00000000000003ff
+
+#ifndef __ASSEMBLY__
+/* This has to be a common function because the next location to fill
+ * information is shared. */
+extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte);
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h
new file mode 100644
index 00000000000..6664ea6f156
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/registers.h
@@ -0,0 +1,106 @@
+#ifndef __ASM_SH_CPU_SH5_REGISTERS_H
+#define __ASM_SH_CPU_SH5_REGISTERS_H
+
+/*
+ * include/asm-sh/cpu-sh5/registers.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifdef __ASSEMBLY__
+/* =====================================================================
+**
+** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>).
+**	      Assigns symbolic names to control & target registers.
+*/
+
+/*
+ * Define some useful aliases for control registers.
+ */
+#define SR	cr0
+#define SSR	cr1
+#define PSSR	cr2
+			/* cr3 UNDEFINED */
+#define INTEVT	cr4
+#define EXPEVT	cr5
+#define PEXPEVT	cr6
+#define TRA	cr7
+#define SPC	cr8
+#define PSPC	cr9
+#define RESVEC	cr10
+#define VBR	cr11
+			/* cr12 UNDEFINED */
+#define TEA	cr13
+			/* cr14-cr15 UNDEFINED */
+#define DCR	cr16
+#define KCR0	cr17
+#define KCR1	cr18
+			/* cr19-cr31 UNDEFINED */
+			/* cr32-cr61 RESERVED */
+#define CTC	cr62
+#define USR	cr63
+
+/*
+ * ABI dependent registers (general purpose set)
+ */
+#define RET	r2
+#define ARG1	r2
+#define ARG2	r3
+#define ARG3	r4
+#define ARG4	r5
+#define ARG5	r6
+#define ARG6	r7
+#define SP	r15
+#define LINK	r18
+#define ZERO	r63
+
+/*
+ * Status register defines: used only by assembly sources (and
+ * 			    syntax independednt)
+ */
+#define SR_RESET_VAL	0x0000000050008000
+#define SR_HARMLESS	0x00000000500080f0	/* Write ignores for most */
+#define SR_ENABLE_FPU	0xffffffffffff7fff	/* AND with this */
+
+#if defined (CONFIG_SH64_SR_WATCH)
+#define SR_ENABLE_MMU	0x0000000084000000	/* OR with this */
+#else
+#define SR_ENABLE_MMU	0x0000000080000000	/* OR with this */
+#endif
+
+#define SR_UNBLOCK_EXC	0xffffffffefffffff	/* AND with this */
+#define SR_BLOCK_EXC	0x0000000010000000	/* OR with this */
+
+#else	/* Not __ASSEMBLY__ syntax */
+
+/*
+** Stringify reg. name
+*/
+#define __str(x)  #x
+
+/* Stringify control register names for use in inline assembly */
+#define __SR __str(SR)
+#define __SSR __str(SSR)
+#define __PSSR __str(PSSR)
+#define __INTEVT __str(INTEVT)
+#define __EXPEVT __str(EXPEVT)
+#define __PEXPEVT __str(PEXPEVT)
+#define __TRA __str(TRA)
+#define __SPC __str(SPC)
+#define __PSPC __str(PSPC)
+#define __RESVEC __str(RESVEC)
+#define __VBR __str(VBR)
+#define __TEA __str(TEA)
+#define __DCR __str(DCR)
+#define __KCR0 __str(KCR0)
+#define __KCR1 __str(KCR1)
+#define __CTC __str(CTC)
+#define __USR __str(USR)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h
new file mode 100644
index 00000000000..12ea0ed144e
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/rtc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_CPU_SH5_RTC_H
+#define __ASM_SH_CPU_SH5_RTC_H
+
+#define rtc_reg_size		sizeof(u32)
+#define RTC_BIT_INVERTED	0	/* The SH-5 RTC is surprisingly sane! */
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH5_RTC_H */
diff --git a/arch/sh/include/mach-dreamcast/mach/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
new file mode 100644
index 00000000000..ddd68e78870
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/dma.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-sh/dreamcast/dma.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_DMA_H
+#define __ASM_SH_DREAMCAST_DMA_H
+
+/* Number of DMA channels */
+#define ONCHIP_NR_DMA_CHANNELS	4
+#define G2_NR_DMA_CHANNELS	4
+#define PVR2_NR_DMA_CHANNELS	1
+
+/* Channels for cascading */
+#define PVR2_CASCADE_CHAN	2
+#define G2_CASCADE_CHAN		3
+
+/* PVR2 DMA Registers */
+#define PVR2_DMA_BASE		0xa05f6800
+#define PVR2_DMA_ADDR		(PVR2_DMA_BASE + 0)
+#define PVR2_DMA_COUNT		(PVR2_DMA_BASE + 4)
+#define PVR2_DMA_MODE		(PVR2_DMA_BASE + 8)
+#define PVR2_DMA_LMMODE0	(PVR2_DMA_BASE + 132)
+#define PVR2_DMA_LMMODE1	(PVR2_DMA_BASE + 136)
+
+/* G2 DMA Register */
+#define G2_DMA_BASE		0xa05f7800
+
+#endif /* __ASM_SH_DREAMCAST_DMA_H */
+
diff --git a/arch/sh/include/mach-dreamcast/mach/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
new file mode 100644
index 00000000000..51f6a87f1f1
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/maple.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_MAPLE_H
+#define __ASM_MAPLE_H
+
+#define MAPLE_PORTS 4
+#define MAPLE_PNP_INTERVAL HZ
+#define MAPLE_MAXPACKETS 8
+#define MAPLE_DMA_ORDER 14
+#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER)
+#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \
+			  MAPLE_DMA_ORDER - PAGE_SHIFT : 0)
+
+/* Maple Bus registers */
+#define MAPLE_BASE     0xa05f6c00
+#define MAPLE_DMAADDR  (MAPLE_BASE+0x04)
+#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10)
+#define MAPLE_ENABLE   (MAPLE_BASE+0x14)
+#define MAPLE_STATE    (MAPLE_BASE+0x18)
+#define MAPLE_SPEED    (MAPLE_BASE+0x80)
+#define MAPLE_RESET    (MAPLE_BASE+0x8c)
+
+#define MAPLE_MAGIC    0x6155404f
+#define MAPLE_2MBPS    0
+#define MAPLE_TIMEOUT(n) ((n)<<15)
+
+/* Function codes */
+#define MAPLE_FUNC_CONTROLLER 0x001
+#define MAPLE_FUNC_MEMCARD    0x002
+#define MAPLE_FUNC_LCD        0x004
+#define MAPLE_FUNC_CLOCK      0x008
+#define MAPLE_FUNC_MICROPHONE 0x010
+#define MAPLE_FUNC_ARGUN      0x020
+#define MAPLE_FUNC_KEYBOARD   0x040
+#define MAPLE_FUNC_LIGHTGUN   0x080
+#define MAPLE_FUNC_PURUPURU   0x100
+#define MAPLE_FUNC_MOUSE      0x200
+
+#endif /* __ASM_MAPLE_H */
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
new file mode 100644
index 00000000000..75fc9009e09
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/dreamcast/pci.h
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_PCI_H
+#define __ASM_SH_DREAMCAST_PCI_H
+
+#include <mach-dreamcast/mach/sysasic.h>
+
+#define	GAPSPCI_REGS		0x01001400
+#define GAPSPCI_DMA_BASE	0x01840000
+#define GAPSPCI_DMA_SIZE	32768
+#define GAPSPCI_BBA_CONFIG	0x01001600
+#define GAPSPCI_BBA_CONFIG_SIZE	0x2000
+
+#define	GAPSPCI_IRQ		HW_EVENT_EXTERNAL
+
+#endif /* __ASM_SH_DREAMCAST_PCI_H */
+
diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
new file mode 100644
index 00000000000..f33426608a8
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h
@@ -0,0 +1,43 @@
+/* include/asm-sh/dreamcast/sysasic.h
+ *
+ * Definitions for the Dreamcast System ASIC and related peripherals.
+ *
+ * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+#ifndef __ASM_SH_DREAMCAST_SYSASIC_H
+#define __ASM_SH_DREAMCAST_SYSASIC_H
+
+#include <asm/irq.h>
+
+/* Hardware events -
+
+   Each of these events correspond to a bit within the Event Mask Registers/
+   Event Status Registers.  Because of the virtual IRQ numbering scheme, a
+   base offset must be used when calculating the virtual IRQ that each event
+   takes.
+*/
+
+#define HW_EVENT_IRQ_BASE  48
+
+/* IRQ 13 */
+#define HW_EVENT_VSYNC     (HW_EVENT_IRQ_BASE +  5) /* VSync */
+#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */
+#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */
+#define HW_EVENT_G2_DMA    (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */
+#define HW_EVENT_PVR2_DMA  (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */
+
+/* IRQ 11 */
+#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */
+#define HW_EVENT_AICA_SYS  (HW_EVENT_IRQ_BASE + 33) /* AICA-related */
+#define HW_EVENT_EXTERNAL  (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */
+
+#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
+
+#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
+
diff --git a/arch/sh/include/mach-landisk/mach/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
new file mode 100644
index 00000000000..35d7368b718
--- /dev/null
+++ b/arch/sh/include/mach-landisk/mach/gio.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_SH_LANDISK_GIO_H
+#define __ASM_SH_LANDISK_GIO_H
+
+#include <linux/ioctl.h>
+
+/* version */
+#define VERSION_STR	"1.00"
+
+/* Driver name */
+#define GIO_DRIVER_NAME		"/dev/giodrv"
+
+/* Use 'k' as magic number */
+#define GIODRV_IOC_MAGIC  'k'
+
+#define GIODRV_IOCRESET    _IO(GIODRV_IOC_MAGIC, 0)
+/*
+ * S means "Set" through a ptr,
+ * T means "Tell" directly
+ * G means "Get" (to a pointed var)
+ * Q means "Query", response is on the return value
+ * X means "eXchange": G and S atomically
+ * H means "sHift": T and Q atomically
+ */
+#define GIODRV_IOCSGIODATA1   _IOW(GIODRV_IOC_MAGIC,  1, unsigned char *)
+#define GIODRV_IOCGGIODATA1   _IOR(GIODRV_IOC_MAGIC,  2, unsigned char *)
+#define GIODRV_IOCSGIODATA2   _IOW(GIODRV_IOC_MAGIC,  3, unsigned short *)
+#define GIODRV_IOCGGIODATA2   _IOR(GIODRV_IOC_MAGIC,  4, unsigned short *)
+#define GIODRV_IOCSGIODATA4   _IOW(GIODRV_IOC_MAGIC,  5, unsigned long *)
+#define GIODRV_IOCGGIODATA4   _IOR(GIODRV_IOC_MAGIC,  6, unsigned long *)
+#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC,  7, unsigned long *)
+#define GIODRV_IOCHARDRESET   _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
+#define GIODRV_IOC_MAXNR 8
+
+#define GIO_READ 0x00000000
+#define GIO_WRITE 0x00000001
+
+#endif /* __ASM_SH_LANDISK_GIO_H  */
diff --git a/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
new file mode 100644
index 00000000000..6fb04ab38b9
--- /dev/null
+++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_SH_IODATA_LANDISK_H
+#define __ASM_SH_IODATA_LANDISK_H
+
+/*
+ * linux/include/asm-sh/landisk/iodata_landisk.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * IO-DATA LANDISK support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_USB		0xa4000000	/* USB Controller M66590 */
+
+#define PA_ATARST	0xb0000000	/* ATA/FATA Access Control Register */
+#define PA_LED		0xb0000001	/* LED Control Register */
+#define PA_STATUS	0xb0000002	/* Switch Status Register */
+#define PA_SHUTDOWN	0xb0000003	/* Shutdown Control Register */
+#define PA_PCIPME	0xb0000004	/* PCI PME Status Register */
+#define PA_IMASK	0xb0000005	/* Interrupt Mask Register */
+/* 2003.10.31 I-O DATA NSD NWG	add.	for shutdown port clear */
+#define PA_PWRINT_CLR	0xb0000006	/* Shutdown Interrupt clear Register */
+
+#define PA_PIDE_OFFSET	0x40		/* CF IDE Offset */
+#define PA_SIDE_OFFSET	0x40		/* HDD IDE Offset */
+
+#define IRQ_PCIINTA	5		/* PCI INTA IRQ */
+#define IRQ_PCIINTB	6		/* PCI INTB IRQ */
+#define IRQ_PCIINDC	7		/* PCI INTC IRQ */
+#define IRQ_PCIINTD	8		/* PCI INTD IRQ */
+#define IRQ_ATA		9		/* ATA IRQ */
+#define IRQ_FATA	10		/* FATA IRQ */
+#define IRQ_POWER	11		/* Power Switch IRQ */
+#define IRQ_BUTTON	12		/* USL-5P Button IRQ */
+#define IRQ_FAULT	13		/* USL-5P Fault  IRQ */
+
+#define __IO_PREFIX landisk
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_IODATA_LANDISK_H */
+
diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h
new file mode 100644
index 00000000000..eb23000e1bb
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_SH_HITACHI_SE_H
+#define __ASM_SH_HITACHI_SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_83902	0xb0000000	/* DP83902A */
+#define PA_83902_IF	0xb0040000	/* DP83902A remote io port */
+#define PA_83902_RST	0xb0080000	/* DP83902A reset port */
+
+#define PA_SUPERIO	0xb0400000	/* SMC37C935A super io chip */
+#define PA_DIPSW0	0xb0800000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb0800002	/* Dip switch 7,8 */
+#define PA_LED		0xb0c00000	/* LED */
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define PA_BCR		0xb0e00000
+#else
+#define PA_BCR		0xb1400000	/* FPGA */
+#endif
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define IRQ_STNIC	12
+#define IRQ_CFCARD	14
+#else
+#define IRQ_STNIC	10
+#define IRQ_CFCARD	7
+#endif
+
+/* SH Ether support (SH7710/SH7712) */
+/* Base address */
+#define SH_ETH0_BASE 0xA7000000
+#define SH_ETH1_BASE 0xA7000400
+/* PHY ID */
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define PHY_ID 0x00
+#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
+# define PHY_ID 0x01
+#endif
+/* Ether IRQ */
+#define SH_ETH0_IRQ	80
+#define SH_ETH1_IRQ	81
+#define SH_TSU_IRQ	82
+
+void init_se_IRQ(void);
+
+#define __IO_PREFIX	se
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_HITACHI_SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
new file mode 100644
index 00000000000..698eb80389a
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7206.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SH_SE7206_H
+#define __ASM_SH_SE7206_H
+
+#define PA_SMSC		0x30000000
+#define PA_MRSHPC	0x34000000
+#define PA_LED		0x31400000
+
+void init_se7206_IRQ(void);
+
+#define __IO_PREFIX	se7206
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SE7206_H */
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
new file mode 100644
index 00000000000..98458460e63
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7343.h
@@ -0,0 +1,149 @@
+#ifndef __ASM_SH_HITACHI_SE7343_H
+#define __ASM_SH_HITACHI_SE7343_H
+
+/*
+ * include/asm-sh/se/se7343.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 7343 support
+ */
+
+/* Box specific addresses.  */
+
+/* Area 0 */
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM		0x00400000	/* Flash ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
+#define PA_SRAM		0x00800000	/* SRAM */
+#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+/* Area 2 */
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+/* Area 3 */
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+/* Area 4 */
+#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED		0xb0C00000	/* LED */
+#define LED_SHIFT       0
+#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
+#define PA_CPLD_MODESET	0xb1400004	/* CPLD Mode set register */
+#define PA_CPLD_ST	0xb1400008	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK	0xb140000a	/* CPLD Interrupt mask register */
+/* Area 5 */
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+/* Area 6 */
+#define PA_LCD1		0xb8000000
+#define PA_LCD2		0xb8800000
+
+#define PORT_PACR	0xA4050100
+#define PORT_PBCR	0xA4050102
+#define PORT_PCCR	0xA4050104
+#define PORT_PDCR	0xA4050106
+#define PORT_PECR	0xA4050108
+#define PORT_PFCR	0xA405010A
+#define PORT_PGCR	0xA405010C
+#define PORT_PHCR	0xA405010E
+#define PORT_PJCR	0xA4050110
+#define PORT_PKCR	0xA4050112
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PNCR	0xA4050118
+#define PORT_PQCR	0xA405011A
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PTCR	0xA4050140
+#define PORT_PUCR	0xA4050142
+#define PORT_PVCR	0xA4050144
+#define PORT_PWCR	0xA4050146
+#define PORT_PYCR	0xA4050148
+#define PORT_PZCR	0xA405014A
+
+#define PORT_PSELA	0xA405014C
+#define PORT_PSELB	0xA405014E
+#define PORT_PSELC	0xA4050150
+#define PORT_PSELD	0xA4050152
+#define PORT_PSELE	0xA4050154
+
+#define PORT_HIZCRA	0xA4050156
+#define PORT_HIZCRB	0xA4050158
+#define PORT_HIZCRC	0xA405015C
+
+#define PORT_DRVCR	0xA4050180
+
+#define PORT_PADR  	0xA4050120
+#define PORT_PBDR  	0xA4050122
+#define PORT_PCDR  	0xA4050124
+#define PORT_PDDR  	0xA4050126
+#define PORT_PEDR  	0xA4050128
+#define PORT_PFDR  	0xA405012A
+#define PORT_PGDR  	0xA405012C
+#define PORT_PHDR  	0xA405012E
+#define PORT_PJDR  	0xA4050130
+#define PORT_PKDR  	0xA4050132
+#define PORT_PLDR  	0xA4050134
+#define PORT_PMDR  	0xA4050136
+#define PORT_PNDR  	0xA4050138
+#define PORT_PQDR  	0xA405013A
+#define PORT_PRDR  	0xA405013C
+#define PORT_PTDR  	0xA4050160
+#define PORT_PUDR  	0xA4050162
+#define PORT_PVDR  	0xA4050164
+#define PORT_PWDR  	0xA4050166
+#define PORT_PYDR  	0xA4050168
+
+#define FPGA_IN		0xb1400000
+#define FPGA_OUT	0xb1400002
+
+#define __IO_PREFIX	sh7343se
+#include <asm/io_generic.h>
+
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+#define IRQ4_IRQ        36
+#define IRQ5_IRQ        37
+
+#define SE7343_FPGA_IRQ_MRSHPC0	0
+#define SE7343_FPGA_IRQ_MRSHPC1	1
+#define SE7343_FPGA_IRQ_MRSHPC2	2
+#define SE7343_FPGA_IRQ_MRSHPC3	3
+#define SE7343_FPGA_IRQ_SMC	6	/* EXT_IRQ2 */
+#define SE7343_FPGA_IRQ_USB	8
+
+#define SE7343_FPGA_IRQ_NR	11
+#define SE7343_FPGA_IRQ_BASE	120
+
+#define MRSHPC_IRQ3    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3)
+#define MRSHPC_IRQ2    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2)
+#define MRSHPC_IRQ1    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1)
+#define MRSHPC_IRQ0    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0)
+#define SMC_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC)
+#define USB_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB)
+
+/* arch/sh/boards/se/7343/irq.c */
+void init_7343se_IRQ(void);
+
+#endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
new file mode 100644
index 00000000000..b957f604119
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7721.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef __ASM_SH_SE7721_H
+#define __ASM_SH_SE7721_H
+#include <asm/addrspace.h>
+
+/* Box specific addresses. */
+#define SE_AREA0_WIDTH	2		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM	0xaC000000	/* SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+
+#define PA_PERIPHERAL	0xB8000000
+
+#define PA_PCIC		PA_PERIPHERAL
+#define PA_MRSHPC	(PA_PERIPHERAL + 0x003fffe0)
+#define PA_MRSHPC_MW1	(PA_PERIPHERAL + 0x00400000)
+#define PA_MRSHPC_MW2	(PA_PERIPHERAL + 0x00500000)
+#define PA_MRSHPC_IO	(PA_PERIPHERAL + 0x00600000)
+#define MRSHPC_OPTION	(PA_MRSHPC + 6)
+#define MRSHPC_CSR	(PA_MRSHPC + 8)
+#define MRSHPC_ISR	(PA_MRSHPC + 10)
+#define MRSHPC_ICR	(PA_MRSHPC + 12)
+#define MRSHPC_CPWCR	(PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1	(PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1	(PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1	(PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2	(PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2	(PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2	(PA_MRSHPC + 26)
+#define MRSHPC_CDCR	(PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO	(PA_MRSHPC + 30)
+
+#define PA_LED		0xB6800000	/* 8bit LED */
+#define PA_FPGA		0xB7000000 	/* FPGA base address */
+
+#define MRSHPC_IRQ0	10
+
+#define FPGA_ILSR1	(PA_FPGA + 0x02)
+#define FPGA_ILSR2	(PA_FPGA + 0x03)
+#define FPGA_ILSR3	(PA_FPGA + 0x04)
+#define FPGA_ILSR4	(PA_FPGA + 0x05)
+#define FPGA_ILSR5	(PA_FPGA + 0x06)
+#define FPGA_ILSR6	(PA_FPGA + 0x07)
+#define FPGA_ILSR7	(PA_FPGA + 0x08)
+#define FPGA_ILSR8	(PA_FPGA + 0x09)
+
+void init_se7721_IRQ(void);
+
+#define __IO_PREFIX		se7721
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7721_H */
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
new file mode 100644
index 00000000000..e971d9a82f4
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7722.h
@@ -0,0 +1,112 @@
+#ifndef __ASM_SH_SE7722_H
+#define __ASM_SH_SE7722_H
+
+/*
+ * linux/include/asm-sh/se7722.h
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM	0xaC000000	/* DDR-SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+
+#define PA_PERIPHERAL	0xB0000000
+
+#define PA_PCIC         PA_PERIPHERAL   		/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       (PA_PERIPHERAL + 0x003fffe0)    /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   (PA_PERIPHERAL + 0x00400000)    /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   (PA_PERIPHERAL + 0x00500000)    /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    (PA_PERIPHERAL + 0x00600000)    /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define PA_LED		(PA_PERIPHERAL + 0x00800000)	/* 8bit LED */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01800000) 	/* FPGA base address */
+
+#define PA_LAN		(PA_AREA6_IO + 0)		/* SMC LAN91C111 */
+/* GPIO */
+#define FPGA_IN         0xb1840000UL
+#define FPGA_OUT        0xb1840004UL
+
+#define PORT_PECR       0xA4050108UL
+#define PORT_PJCR       0xA4050110UL
+#define PORT_PSELD      0xA4050154UL
+#define PORT_PSELB      0xA4050150UL
+
+#define PORT_PSELC      0xA4050152UL
+#define PORT_PKCR       0xA4050112UL
+#define PORT_PHCR       0xA405010EUL
+#define PORT_PLCR       0xA4050114UL
+#define PORT_PMCR       0xA4050116UL
+#define PORT_PRCR       0xA405011CUL
+#define PORT_PXCR       0xA4050148UL
+#define PORT_PSELA      0xA405014EUL
+#define PORT_PYCR       0xA405014AUL
+#define PORT_PZCR       0xA405014CUL
+#define PORT_HIZCRA     0xA4050158UL
+#define PORT_HIZCRC     0xA405015CUL
+
+/* IRQ */
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+
+#define IRQ01_MODE      0xb1800000
+#define IRQ01_STS       0xb1800004
+#define IRQ01_MASK      0xb1800008
+
+/* Bits in IRQ01_* registers */
+
+#define SE7722_FPGA_IRQ_USB	0 /* IRQ0 */
+#define SE7722_FPGA_IRQ_SMC	1 /* IRQ0 */
+#define SE7722_FPGA_IRQ_MRSHPC0	2 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC1	3 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC2	4 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC3	5 /* IRQ1 */
+
+#define SE7722_FPGA_IRQ_NR	6
+#define SE7722_FPGA_IRQ_BASE	110
+
+#define MRSHPC_IRQ3    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3)
+#define MRSHPC_IRQ2    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2)
+#define MRSHPC_IRQ1    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1)
+#define MRSHPC_IRQ0    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0)
+#define SMC_IRQ		(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC)
+#define USB_IRQ		(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB)
+
+/* arch/sh/boards/se/7722/irq.c */
+void init_se7722_IRQ(void);
+
+#define __IO_PREFIX		se7722
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7722_H */
diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
new file mode 100644
index 00000000000..b36792ac5d6
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7751.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_SH_HITACHI_7751SE_H
+#define __ASM_SH_HITACHI_7751SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_7751se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
+#define PA_LED		0xba000000	/* LED */
+#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_MODE     (PA_MRSHPC + 4)
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#define IRQ_79C973	13
+
+void init_7751se_IRQ(void);
+
+#define __IO_PREFIX	sh7751se
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
new file mode 100644
index 00000000000..40e9b41458c
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7780.h
@@ -0,0 +1,108 @@
+#ifndef __ASM_SH_SE7780_H
+#define __ASM_SH_SE7780_H
+
+/*
+ * linux/include/asm-sh/se7780.h
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SM501	PA_EXT1		/* Graphic IC (SM501) */
+#define PA_SM501_SIZE	PA_EXT1_SIZE	/* Graphic IC (SM501) */
+#define PA_SDRAM	0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_FLASH	PA_EXT4		/* Expansion Flash-ROM */
+
+#define PA_PERIPHERAL	PA_AREA6_IO	/* SW6-6=ON */
+
+#define PA_LAN		(PA_PERIPHERAL + 0)		/* SMC LAN91C111 */
+#define PA_LED_DISP	(PA_PERIPHERAL + 0x02000000)	/* 8words LED Display */
+#define DISP_CHAR_RAM	(7 << 3)
+#define DISP_SEL0_ADDR	(DISP_CHAR_RAM + 0)
+#define DISP_SEL1_ADDR	(DISP_CHAR_RAM + 1)
+#define DISP_SEL2_ADDR	(DISP_CHAR_RAM + 2)
+#define DISP_SEL3_ADDR	(DISP_CHAR_RAM + 3)
+#define DISP_SEL4_ADDR	(DISP_CHAR_RAM + 4)
+#define DISP_SEL5_ADDR	(DISP_CHAR_RAM + 5)
+#define DISP_SEL6_ADDR	(DISP_CHAR_RAM + 6)
+#define DISP_SEL7_ADDR	(DISP_CHAR_RAM + 7)
+
+#define DISP_UDC_RAM	(5 << 3)
+#define PA_FPGA		(PA_PERIPHERAL + 0x03000000) /* FPGA base address */
+
+/* FPGA register address and bit */
+#define FPGA_SFTRST		(PA_FPGA + 0)	/* Soft reset register */
+#define FPGA_INTMSK1		(PA_FPGA + 2)	/* Interrupt Mask register 1 */
+#define FPGA_INTMSK2		(PA_FPGA + 4)	/* Interrupt Mask register 2 */
+#define FPGA_INTSEL1		(PA_FPGA + 6)	/* Interrupt select register 1 */
+#define FPGA_INTSEL2		(PA_FPGA + 8)	/* Interrupt select register 2 */
+#define FPGA_INTSEL3		(PA_FPGA + 10)	/* Interrupt select register 3 */
+#define FPGA_PCI_INTSEL1	(PA_FPGA + 12)	/* PCI Interrupt select register 1 */
+#define FPGA_PCI_INTSEL2	(PA_FPGA + 14)	/* PCI Interrupt select register 2 */
+#define FPGA_INTSET		(PA_FPGA + 16)	/* IRQ/IRL select register */
+#define FPGA_INTSTS1		(PA_FPGA + 18)	/* Interrupt status register 1 */
+#define FPGA_INTSTS2		(PA_FPGA + 20)	/* Interrupt status register 2 */
+#define FPGA_REQSEL		(PA_FPGA + 22)	/* REQ/GNT select register */
+#define FPGA_DBG_LED		(PA_FPGA + 32)	/* Debug LED(D-LED[8:1] */
+#define PA_LED			FPGA_DBG_LED
+#define FPGA_IVDRID		(PA_FPGA + 36)	/* iVDR ID Register */
+#define FPGA_IVDRPW		(PA_FPGA + 38)	/* iVDR Power ON Register */
+#define FPGA_MMCID		(PA_FPGA + 40)	/* MMC ID Register */
+
+/* FPGA INTSEL position */
+/* INTSEL1 */
+#define IRQPOS_SMC91CX          (0 * 4)
+#define IRQPOS_SM501            (1 * 4)
+/* INTSEL2 */
+#define IRQPOS_EXTINT1          (0 * 4)
+#define IRQPOS_EXTINT2          (1 * 4)
+#define IRQPOS_EXTINT3          (2 * 4)
+#define IRQPOS_EXTINT4          (3 * 4)
+/* INTSEL3 */
+#define IRQPOS_PCCPW            (0 * 4)
+
+/* IDE interrupt */
+#define IRQ_IDE0                67 /* iVDR */
+
+/* SMC interrupt */
+#define SMC_IRQ                 8
+
+/* SM501 interrupt */
+#define SM501_IRQ               0
+
+/* interrupt pin */
+#define IRQPIN_EXTINT1          0 /* IRQ0 pin */
+#define IRQPIN_EXTINT2          1 /* IRQ1 pin */
+#define IRQPIN_EXTINT3          2 /* IRQ2 pin */
+#define IRQPIN_SMC91CX          3 /* IRQ3 pin */
+#define IRQPIN_EXTINT4          4 /* IRQ4 pin */
+#define IRQPIN_PCC0             5 /* IRQ5 pin */
+#define IRQPIN_PCC2             6 /* IRQ6 pin */
+#define IRQPIN_SM501            7 /* IRQ7 pin */
+#define IRQPIN_PCCPW            7 /* IRQ7 pin */
+
+/* arch/sh/boards/se/7780/irq.c */
+void init_se7780_IRQ(void);
+
+#define __IO_PREFIX		se7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7780_H */
diff --git a/arch/sh/include/mach-sh03/mach/io.h b/arch/sh/include/mach-sh03/mach/io.h
new file mode 100644
index 00000000000..c39c785bba9
--- /dev/null
+++ b/arch/sh/include/mach-sh03/mach/io.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/sh03/io.h
+ *
+ * Copyright 2004 Interface Co.,Ltd. Saito.K
+ *
+ * IO functions for an Interface CTP/PCI-SH03
+ */
+
+#ifndef _ASM_SH_IO_SH03_H
+#define _ASM_SH_IO_SH03_H
+
+#include <linux/time.h>
+
+#define IRL0_IRQ	2
+#define IRL0_PRIORITY	13
+#define IRL1_IRQ	5
+#define IRL1_PRIORITY	10
+#define IRL2_IRQ	8
+#define IRL2_PRIORITY	7
+#define IRL3_IRQ	11
+#define IRL3_PRIORITY	4
+
+void heartbeat_sh03(void);
+
+#endif /* _ASM_SH_IO_SH03_H */
diff --git a/arch/sh/include/mach-sh03/mach/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
new file mode 100644
index 00000000000..19c40b80428
--- /dev/null
+++ b/arch/sh/include/mach-sh03/mach/sh03.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_SH_SH03_H
+#define __ASM_SH_SH03_H
+
+/*
+ * linux/include/asm-sh/sh03/sh03.h
+ *
+ * Copyright (C) 2004  Interface Co., Ltd. Saito.K
+ *
+ * Interface CTP/PCI-SH03 support
+ */
+
+#define PA_PCI_IO       (0xbe240000)    /* PCI I/O space */
+#define PA_PCI_MEM      (0xbd000000)    /* PCI MEM space */
+
+#define PCIPAR          (0xa4000cf8)    /* PCI Config address */
+#define PCIPDR          (0xa4000cfc)    /* PCI Config data    */
+
+#endif  /* __ASM_SH_SH03_H */
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/sh/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 4bbdce36b92..0e6905fe9fe 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_BINFMT_ELF)	+= dump_task.o
+obj-$(CONFIG_ELF_CORE)		+= dump_task.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 01ff4d05aab..bea40339919 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -80,11 +80,11 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #endif
 
 /*
@@ -157,7 +157,7 @@ static int __init cf_init_se(void)
 }
 #endif
 
-int __init cf_init(void)
+static int __init cf_init(void)
 {
 	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
 		return cf_init_se();
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index b5f1e23ed57..f5eb56e6bc5 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk)
 	}
 }
 
-int __clk_enable(struct clk *clk)
+static int __clk_enable(struct clk *clk)
 {
 	/*
 	 * See if this is the first time we're enabling the clock, some
@@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(__clk_enable);
 
 int clk_enable(struct clk *clk)
 {
@@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref)
 	/* Nothing to do */
 }
 
-void __clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
 	int count = kref_put(&clk->kref, clk_kref_release);
 
@@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk)
 			clk->ops->disable(clk);
 	}
 }
-EXPORT_SYMBOL_GPL(__clk_disable);
 
 void clk_disable(struct clk *clk)
 {
@@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off,
 	list_for_each_entry_reverse(clk, &clock_list, node) {
 		unsigned long rate = clk_get_rate(clk);
 
-		/*
-		 * Don't bother listing dummy clocks with no ancestry
-		 * that only support enable and disable ops.
-		 */
-		if (unlikely(!rate && !clk->parent))
-			continue;
-
-		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
-			     rate / 1000000, (rate % 1000000) / 10000);
+		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
+			     rate / 1000000, (rate % 1000000) / 10000,
+			     ((clk->flags & CLK_ALWAYS_ENABLED) ||
+			      (atomic_read(&clk->kref.refcount) != 1)) ?
+			     "enabled" : "disabled");
 	}
 
 	return p - buf;
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 79baa47af97..726f0335da7 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/bitops.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/page.h>
 
 /*
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
index da5dae78788..8c70e201bde 100644
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ b/arch/sh/kernel/cpu/irq/intc.c
@@ -62,7 +62,7 @@ struct intc_desc_int {
 #endif
 
 static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned long ack_handle[NR_IRQS];
 #endif
 
@@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq)
 	}
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static void intc_mask_ack(unsigned int irq)
 {
 	struct intc_desc_int *d = get_intc_desc(irq);
@@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq)
 
 	if (handle) {
 		addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
-		ctrl_inb(addr);
-		ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+		switch (_INTC_FN(handle)) {
+		case REG_FN_MODIFY_BASE + 0:	/* 8bit */
+			ctrl_inb(addr);
+			ctrl_outb(0xff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 1:	/* 16bit */
+			ctrl_inw(addr);
+			ctrl_outw(0xffff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 3:	/* 32bit */
+			ctrl_inl(addr);
+			ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr);
+			break;
+		default:
+			BUG();
+			break;
+		}
 	}
 }
 #endif
@@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
 	return 0;
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned int __init intc_ack_data(struct intc_desc *desc,
 					  struct intc_desc_int *d,
 					  intc_enum enum_id)
@@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
 	/* irq should be disabled by default */
 	d->chip.mask(irq);
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs)
 		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
 #endif
@@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
 	d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
 #endif
 	d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
@@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->chip.mask_ack = intc_disable;
 	d->chip.set_type = intc_set_sense;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs) {
 		for (i = 0; i < desc->nr_ack_regs; i++)
 			k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 0fc89069d8c..becc54c4569 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -3,7 +3,7 @@
  *
  * The SH-2 exception entry
  *
- * Copyright (C) 2005,2006 Yoshinori Sato
+ * Copyright (C) 2005-2008 Yoshinori Sato
  * Copyright (C) 2005  AXE,Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 #include <asm/page.h>
@@ -36,43 +36,41 @@ OFF_TRA	=  (16*4+6*4)
 #include <asm/entry-macros.S>
 
 ENTRY(exception_handler)
-	! already saved r0/r1
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
 	mov.l	r2,@-sp
 	mov.l	r3,@-sp
-	mov	r0,r1
 	cli
 	mov.l	$cpu_mode,r2
 	mov.l	@r2,r0
 	mov.l	@(5*4,r15),r3	! previous SR
-	shll2	r3		! set "S" flag
-	rotl	r0		! T <- "S" flag
-	rotl	r0		! "S" flag is LSB
-	rotcr	r3		! T -> r3:b30
-	shlr	r3
-	shlr	r0
-	bt/s	1f
-	 mov.l	r3,@(5*4,r15)	! copy cpu mode to SR
+	or	r0,r3		! set MD
+	tst	r0,r0
+	bf/s	1f		! previous mode check
+	 mov.l	r3,@(5*4,r15)	! update SR
 	! switch to kernel mode
-	mov	#1,r0
-	rotr	r0
-	rotr	r0
+	mov.l	__md_bit,r0
 	mov.l	r0,@r2		! enter kernel mode
 	mov.l	$current_thread_info,r2
 	mov.l	@r2,r2
-	mov	#0x20,r0
+	mov	#(THREAD_SIZE >> 8),r0
 	shll8	r0
 	add	r2,r0
 	mov	r15,r2		! r2 = user stack top
 	mov	r0,r15		! switch kernel stack
-	add	#-4,r15		! dummy
 	mov.l	r1,@-r15	! TRA
 	sts.l	macl, @-r15
 	sts.l	mach, @-r15
 	stc.l	gbr, @-r15
-	mov.l	@(4*4,r2),r0
-	mov.l	@(5*4,r2),r1
-	mov.l	r1,@-r15	! original SR
+	mov.l	@(5*4,r2),r0
+	mov.l	r0,@-r15	! original SR
 	sts.l	pr,@-r15
+	mov.l	@(4*4,r2),r0
 	mov.l	r0,@-r15	! original PC
 	mov	r2,r3
 	add	#(4+2)*4,r3	! rewind r0 - r3 + exception frame
@@ -88,14 +86,15 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r15
 	mov.l	r5,@-r15
 	mov.l	r4,@-r15
+	mov	r1,r9		! save TRA
 	mov	r2,r8		! copy user -> kernel stack
-	mov.l	@r8+,r3
+	mov.l	@(0,r8),r3
 	mov.l	r3,@-r15
-	mov.l	@r8+,r2
+	mov.l	@(4,r8),r2
 	mov.l	r2,@-r15
-	mov.l	@r8+,r1
+	mov.l	@(12,r8),r1
 	mov.l	r1,@-r15
-	mov.l	@r8+,r0
+	mov.l	@(8,r8),r0
 	bra	2f
 	 mov.l	r0,@-r15
 1:
@@ -107,10 +106,11 @@ ENTRY(exception_handler)
 	mov.l	r0,@-r15	
 	mov.l	@r2+,r0		! old R2
 	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R1
-	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R0
+	mov.l	@(4,r2),r0	! old R1
 	mov.l	r0,@-r15	
+	mov.l	@r2,r0		! old R0
+	mov.l	r0,@-r15
+	add	#8,r2
 	mov.l	@r2+,r3		! old PC
 	mov.l	@r2+,r0		! old SR
 	add	#-4,r2		! exception frame stub (sr)
@@ -135,14 +135,12 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r2
 	mov.l	r5,@-r2
 	mov.l	r4,@-r2
+	mov	r1,r9
 	mov.l	@(OFF_R0,r15),r0
 	mov.l	@(OFF_R1,r15),r1
 	mov.l	@(OFF_R2,r15),r2
 	mov.l	@(OFF_R3,r15),r3
 2:
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	@r8,r9	
 	mov	#64,r8
 	cmp/hs	r8,r9
 	bt	interrupt_entry	! vec >= 64 is interrupt
@@ -150,26 +148,14 @@ ENTRY(exception_handler)
 	cmp/hs	r8,r9
 	bt	trap_entry	! 64 > vec >= 32  is trap
 
-#if defined(CONFIG_SH_FPU)
-	mov     #13,r8
-	cmp/eq  r8,r9
-	bt      10f             ! fpu
-	nop
-#endif
-
 	mov.l	4f,r8
 	mov	r9,r4
 	shll2	r9
 	add	r9,r8
-	mov.l	@r8,r8
-	mov	#0,r9
-	cmp/eq	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
 	bf	3f
 	mov.l	8f,r8		! unhandled exception
-#if defined(CONFIG_SH_FPU)
-10:
-	mov.l	9f, r8		! unhandled exception
-#endif
 3:
 	mov.l	5f,r10
 	jmp	@r8
@@ -188,10 +174,7 @@ interrupt_entry:
 5:	.long	ret_from_exception
 6:	.long	ret_from_irq
 7:	.long	do_IRQ
-8:	.long	do_exception_error
-#ifdef CONFIG_SH_FPU
-9:	.long	fpu_error_trap_handler
-#endif
+8:	.long	exception_error
 
 trap_entry:
 	mov	#0x30,r8
@@ -200,24 +183,9 @@ trap_entry:
 	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
 1:	
 	shll2	r9			! TRA
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	r9,@r8
-	mov	r9,r8
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	2f, r9
-	jsr	@r9
-	 nop
-#endif
-	sti
-	bra	system_call
-	 nop
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
 	
-	.align	2
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:	.long	trace_hardirqs_on
-#endif
-
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	/* Unwind the stack and jmp to the debug entry */
 ENTRY(sh_bios_handler)
@@ -240,7 +208,7 @@ ENTRY(sh_bios_handler)
 	mov.l	@r2,r2
 	stc	sr,r3
 	mov.l	r2,@r0
-	mov.l	r3,@r0
+	mov.l	r3,@(4,r0)
 	mov.l	r1,@(8,r0)	
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
@@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler)
 	mov.l	1f,r0
 	jmp	@r0
 	 mov	#0,r5				! writeaccess is unknown
-	.align	2
 
+	.align	2
 1:	.long	do_address_error
 
 restore_all:
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	1f, r0
-	jsr	@r0
-	 nop
-#endif
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
 	mov	r15,r0
 	mov.l	$cpu_mode,r2
 	mov	#OFF_SR,r3
 	mov.l	@(r0,r3),r1
-	mov.l	r1,@r2
+	mov.l	__md_bit,r3
+	and	r1,r3				! copy MD bit
+	mov.l	r3,@r2
 	shll2	r1				! clear MD bit
 	shlr2	r1
 	mov.l	@(OFF_SP,r0),r2
@@ -297,12 +273,6 @@ restore_all:
 	mov	#OFF_PC,r3
 	mov.l	@(r0,r3),r1
 	mov.l	r1,@r2				! set pc
-	add	#4*16+4,r0
-	lds.l	@r0+,pr
-	add	#4,r0				! skip sr
-	ldc.l	@r0+,gbr
-	lds.l	@r0+,mach
-	lds.l	@r0+,macl
 	get_current_thread_info r0, r1
 	mov.l	$current_thread_info,r1
 	mov.l	r0,@r1
@@ -326,9 +296,8 @@ restore_all:
 	 nop
 
 	.align 2
-#ifdef CONFIG_TRACE_IRQFLAGS
-1:     .long   trace_hardirqs_off
-#endif
+__md_bit:
+	.long	0x40000000
 $current_thread_info:
 	.long	__current_thread_info
 $cpu_mode:	
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
index 6d285af7846..85b0bf81fc1 100644
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ b/arch/sh/kernel/cpu/sh2/ex.S
@@ -18,16 +18,17 @@
 exception_entry:	
 no	=	0
 	.rept	256
-	mov.l	r0,@-sp
-	mov	#no,r0
+	mov.l	r1,@-sp
 	bra	exception_trampoline
-	and	#0xff,r0
+	mov	#no,r1
 no	=	no + 1
 	.endr
 exception_trampoline:
-	mov.l	r1,@-sp
-	mov.l	$exception_handler,r1
-	jmp	@r1
+	mov.l	r0,@-sp
+	mov.l	$exception_handler,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
 
 	.align	2
 $exception_entry:
@@ -41,6 +42,6 @@ $exception_handler:
 ENTRY(vbr_base)
 vector	=	0
 	.rept	256
-	.long	exception_entry + vector * 8
+	.long	exception_entry + vector * 6
 vector	=	vector + 1
 	.endr
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index cc530f4d84d..56e5878e551 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -96,8 +96,32 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct resource eth_resources[] = {
+	[0] = {
+		.start = 0xfb000000,
+		.end =   0xfb0001c8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 85,
+		.end = 85,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device eth_device = {
+	.name = "sh-eth",
+	.id	= -1,
+	.dev = {
+		.platform_data = (void *)1,
+	},
+	.num_resources = ARRAY_SIZE(eth_resources),
+	.resource = eth_resources,
+};
+
 static struct platform_device *sh7619_devices[] __initdata = {
 	&sci_device,
+	&eth_device,
 };
 
 static int __init sh7619_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index 7e2b90cfa7b..1ab1ecf4c76 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -4,7 +4,7 @@
 
 obj-y	:= common.o probe.o opcode_helper.o
 
-common-y	+= $(addprefix ../sh2/, ex.o entry.o)
+common-y	+= ex.o entry.o
 
 obj-$(CONFIG_SH_FPU)	+= fpu.o
 
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
new file mode 100644
index 00000000000..ab3903eeda5
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -0,0 +1,249 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/entry.S
+ *
+ * The SH-2A exception entry
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ * Based on arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+	
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+2*4)
+OFF_TRA	=  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+	mov.l	r2,@-sp
+	cli
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(0,r2)	!previus SR.MD
+	bst.b	#6,@(4*4,r15)	!set cpu mode to SR.MD
+	bt	1f
+	! switch to kernel mode
+	bset.b	#6,@(0,r2)	!set SR.MD
+	mov.l	$current_thread_info,r2
+	mov.l	@r2,r2
+	mov	#(THREAD_SIZE >> 8),r0
+	shll8	r0
+	add	r2,r0		! r0 = kernel stack tail
+	mov	r15,r2		! r2 = user stack top
+	mov	r0,r15		! switch kernel stack
+	mov.l	r1,@-r15	! TRA
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	mov.l	@(4*4,r2),r0
+	mov.l	r0,@-r15	! original SR
+	sts.l	pr,@-r15
+	mov.l	@(3*4,r2),r0
+	mov.l	r0,@-r15	! original PC
+	mov	r2,r0
+	add	#(3+2)*4,r0	! rewind r0 - r3 + exception frame
+	lds	r0,pr		! pr = original SP
+	movmu.l	r3,@-r15	! save regs
+	mov	r2,r8		! r8 =  previus stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore previous stack
+	mov.l	@r8+,r2
+	mov.l	@r8+,r0
+	mov.l	@r8+,r1
+	bra	2f
+	 movml.l r2,@-r15
+1:
+	! in kernel exception
+	mov	r15,r2
+	add	#-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
+	movmu.l	r3,@-r15
+	mov	r2,r8		! r8 = previous stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore exception frame & regs
+	mov.l	@r8+,r2		! old R2
+	mov.l	@r8+,r0		! old R0
+	mov.l	@r8+,r1		! old R1
+	mov.l	@r8+,r10	! old PC
+	mov.l	@r8+,r11	! old SR
+	movml.l	r2,@-r15
+	mov.l	r10,@(OFF_PC,r15)
+	mov.l	r11,@(OFF_SR,r15)
+	mov.l	r8,@(OFF_SP,r15)	! save old sp
+	mov	r15,r8
+	add	#OFF_TRA + 4,r8
+	mov.l	r9,@-r8
+	sts.l	macl,@-r8
+	sts.l	mach,@-r8
+	stc.l	gbr,@-r8
+	add	#-4,r8
+	sts.l	pr,@-r8
+2:
+	! dispatch exception / interrupt
+	mov	#64,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! vec >= 64 is interrupt
+	mov	#32,r8
+	cmp/hs	r8,r9
+	bt	trap_entry	! 64 > vec >= 32  is trap
+
+	mov.l	4f,r8
+	mov	r9,r4
+	shll2	r9
+	add	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
+	bf	3f
+	mov.l	8f,r8		! unhandled exception
+3:
+	mov.l	5f,r10
+	jmp	@r8
+	 lds	r10,pr
+
+interrupt_entry:
+	mov	r9,r4
+	mov	r15,r5
+	mov.l	7f,r8
+	mov.l	6f,r9
+	jmp	@r8
+	 lds	r9,pr
+
+	.align	2
+4:	.long	exception_handling_table
+5:	.long	ret_from_exception
+6:	.long	ret_from_irq
+7:	.long	do_IRQ
+8:	.long	exception_error
+
+trap_entry:
+	mov	#0x30,r8
+	cmp/ge	r8,r9		! vector 0x20-0x2f is systemcall
+	bt	1f
+	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
+1:	
+	shll2	r9			! TRA
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
+	
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+	mov	r15,r0
+	add	#(22-4)*4-4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	@(OFF_SP,r0),r1
+	mov.l	@(OFF_SR,r2),r3
+	mov.l	r3,@-r1
+	mov.l	@(OFF_SP,r2),r3
+	mov.l	r3,@-r1
+	mov	r15,r0
+	add	#(22-4)*4-8,r0
+	mov.l	1f,r2
+	mov.l	@r2,r2
+	stc	sr,r3
+	mov.l	r2,@r0
+	mov.l	r3,@(4,r0)
+	mov.l	r1,@(8,r0)
+	movml.l	@r15+,r14
+	add	#8,r15
+	lds.l	@r15+, pr
+	rte
+	 mov.l	@r15+,r15
+	.align	2
+1:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+	mov	r15,r4				! regs
+	mov.l	@(OFF_PC,r15),r6		! pc
+	mov.l	1f,r0
+	jmp	@r0
+	 mov	#0,r5				! writeaccess is unknown
+
+	.align	2
+1:	.long	do_address_error
+
+restore_all:
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(OFF_SR,r15)
+	bst.b	#6,@(0,r2)			! save CPU mode
+	mov.l	@(OFF_SR,r0),r1
+	shll2	r1
+	shlr2	r1				! clear MD bit
+	mov.l	@(OFF_SP,r0),r2
+	add	#-8,r2
+	mov.l	r2,@(OFF_SP,r0)			! point exception frame top
+	mov.l	r1,@(4,r2)			! set sr
+	mov.l	@(OFF_PC,r0),r1
+	mov.l	r1,@r2				! set pc
+	get_current_thread_info r0, r1
+	mov.l	$current_thread_info,r1
+	mov.l	r0,@r1
+	movml.l	@r15+,r14
+	mov.l	@r15,r15
+	rte
+	 nop
+
+	.align 2
+$current_thread_info:
+	.long	__current_thread_info
+$cpu_mode:	
+	.long	__cpu_mode
+		
+! common exception handler
+#include "../../entry-common.S"
+	
+	.data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+	.long	0x40000000
+		
+	.section	.bss
+__current_thread_info:
+	.long	0
+
+ENTRY(exception_handling_table)
+	.space	4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
new file mode 100644
index 00000000000..3ead9e63965
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/ex.S
@@ -0,0 +1,72 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/ex.S
+ *
+ * The SH-2A exception vector table
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+
+! exception no 0 to 255
+exception_entry0:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline0
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline0:
+	mov.l	r0,@-sp
+	mov.l	1f,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
+	 
+	.align	2
+1:	.long	exception_handler
+
+! exception no 256 to 511
+exception_entry1:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline1
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline1:
+	mov.l	r0,@-sp
+	extu.b	r1,r1
+	movi20	#0x100,r0
+	add	r0,r1
+	mov.l	1f,r0
+	jmp	@r0
+	  extu.w	r1,r1
+	
+	.align	2
+1:	.long	exception_handler
+
+	!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry0 + vector * 6
+vector	=	vector + 1
+	.endr
+	.rept	256
+	.long	exception_entry1 + vector * 6
+vector	=	vector + 1
+	.endr
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 4004073f98c..3fe482dd05c 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -14,7 +14,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/page.h>
 
 ! NOTE:
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 11b6d9c6eda..dac42972689 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -4,7 +4,7 @@
  *  The SH-3 and SH-4 exception vector table.
 
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- *  Copyright (C) 2003 - 2006  Paul Mundt
+ *  Copyright (C) 2003 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,13 +12,30 @@
  */
 #include <linux/linkage.h>
 
+#if !defined(CONFIG_MMU)
+#define	tlb_miss_load			exception_error
+#define tlb_miss_store			exception_error
+#define initial_page_write		exception_error
+#define tlb_protection_violation_load	exception_error
+#define tlb_protection_violation_store	exception_error
+#define address_error_load		exception_error
+#define address_error_store		exception_error
+#endif
+
+#if !defined(CONFIG_SH_FPU)
+#define	fpu_error_trap_handler		exception_error
+#endif
+
+#if !defined(CONFIG_KGDB_NMI)
+#define kgdb_handle_exception		exception_error
+#endif
+
 	.align 2
 	.data
 
 ENTRY(exception_handling_table)
 	.long	exception_error		/* 000 */
 	.long	exception_error
-#if defined(CONFIG_MMU)
 	.long	tlb_miss_load		/* 040 */
 	.long	tlb_miss_store
 	.long	initial_page_write
@@ -26,30 +43,13 @@ ENTRY(exception_handling_table)
 	.long	tlb_protection_violation_store
 	.long	address_error_load
 	.long	address_error_store	/* 100 */
-#else
-	.long	exception_error	! tlb miss load		/* 040 */
-	.long	exception_error	! tlb miss store
-	.long	exception_error	! initial page write
-	.long	exception_error	! tlb prot violation load
-	.long	exception_error	! tlb prot violation store
-	.long	exception_error	! address error load
-	.long	exception_error	! address error store	/* 100 */
-#endif
-#if defined(CONFIG_SH_FPU)
 	.long	fpu_error_trap_handler	/* 120 */
-#else
-	.long	exception_error		/* 120 */
-#endif
 	.long	exception_error		/* 140 */
 	.long	system_call	! Unconditional Trap	 /* 160 */
 	.long	exception_error	! reserved_instruction (filled by trap_init) /* 180 */
 	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
 ENTRY(nmi_slot)
-#if defined (CONFIG_KGDB_NMI)
 	.long	kgdb_handle_exception	/* 1C0 */	! Allow trap to debugger
-#else
-	.long	exception_none	/* 1C0 */	! Not implemented yet
-#endif
 ENTRY(user_break_point_trap)
 	.long	break_point_trap	/* 1E0 */
 
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 8020796139f..2d452f67fb8 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -13,7 +13,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/io.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index be492696918..2e42572b1b1 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -50,14 +50,18 @@ int __init detect_cpu_and_cache_system(void)
 	boot_cpu_data.dcache.ways		= 1;
 	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
 
+	/* We don't know the chip cut */
+	boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
+
 	/*
 	 * Setup some generic flags we can probe on SH-4A parts
 	 */
-	if (((pvr >> 24) & 0xff) == 0x10) {
+	if (((pvr >> 16) & 0xff) == 0x10) {
 		if ((cvr & 0x10000000) == 0)
 			boot_cpu_data.flags |= CPU_HAS_DSP;
 
 		boot_cpu_data.flags |= CPU_HAS_LLSC;
+		boot_cpu_data.cut_major = pvr & 0x7f;
 	}
 
 	/* FPU detection works for everyone */
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
index 7b2d337ee41..828cb57cb95 100644
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ b/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -36,7 +36,7 @@
  * and Kamel Khelifi <kamel.khelifi@st.com>
  */
 #include <linux/kernel.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 
 #define LIT64( a ) a##LL
 
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 9561b02ade0..8a8a993f55e 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -22,7 +22,7 @@
 #include <linux/io.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 
 struct sq_mapping;
 
@@ -199,7 +199,7 @@ EXPORT_SYMBOL(sq_remap);
 
 /**
  * sq_unmap - Unmap a Store Queue allocation
- * @map: Pre-allocated Store Queue mapping.
+ * @vaddr: Pre-allocated Store Queue mapping.
  *
  * Unmaps the store queue allocation @map that was previously created by
  * sq_remap(). Also frees up the pte that was previously inserted into
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index a880e796875..9381ad8da26 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 7adc4f16e95..00000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343/SH7722 support for the clock framework
- *
- *  Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * SH7343/SH7722 uses a common set of multipliers and divisors, so this
- * is quite simple..
- */
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
-
-static void master_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void master_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) & 0x000f);
-	clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_master_clk_ops = {
-	.init		= master_clk_init,
-	.recalc		= master_clk_recalc,
-};
-
-static void module_clk_init(struct clk *clk)
-{
-	clk->parent = NULL;
-	clk->rate = CONFIG_SH_PCLK_FREQ;
-}
-
-static struct clk_ops sh7343_module_clk_ops = {
-	.init		= module_clk_init,
-};
-
-static void bus_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void bus_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
-	clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_bus_clk_ops = {
-	.init		= bus_clk_init,
-	.recalc		= bus_clk_recalc,
-};
-
-static void cpu_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "module_clk");
-	clk->flags |= CLK_RATE_PROPAGATES;
-	clk_set_rate(clk, clk_get_rate(clk));
-}
-
-static void cpu_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
-	clk->rate = clk->parent->rate * pll_calc() *
-		multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_cpu_clk_ops = {
-	.init		= cpu_clk_init,
-	.recalc		= cpu_clk_recalc,
-};
-
-static struct clk_ops *sh7343_clk_ops[] = {
-	&sh7343_master_clk_ops,
-	&sh7343_module_clk_ops,
-	&sh7343_bus_clk_ops,
-	&sh7343_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(sh7343_clk_ops))
-		*ops = sh7343_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 299138ebe16..db913855c2f 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7722 & SH7366 support for the clock framework
+ * SH7343, SH7722, SH7723 & SH7366 support for the clock framework
  *
  * Copyright (c) 2006-2007 Nomad Global Solutions Inc
  * Based on code for sh7343 by Paul Mundt
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/errno.h>
+#include <linux/stringify.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
@@ -411,40 +412,40 @@ static struct clk_ops sh7722_frqcr_clk_ops = {
  * clock ops methods for SIU A/B and IrDA clock
  *
  */
-static int sh7722_siu_which(struct clk *clk)
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
+static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
 {
-	if (!strcmp(clk->name, "siu_a_clk"))
-		return 0;
-	if (!strcmp(clk->name, "siu_b_clk"))
-		return 1;
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	if (!strcmp(clk->name, "irda_clk"))
-		return 2;
-#endif
-	return -EINVAL;
+	unsigned long r;
+	int div;
+
+	r = ctrl_inl(clk->arch_flags);
+	div = sh7722_find_divisors(clk->parent->rate, rate);
+	if (div < 0)
+		return div;
+	r = (r & ~0xF) | div;
+	ctrl_outl(r, clk->arch_flags);
+	return 0;
 }
 
-static unsigned long sh7722_siu_regs[] = {
-	[0] = SCLKACR,
-	[1] = SCLKBCR,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	[2] = IrDACLKCR,
-#endif
-};
+static void sh7722_siu_recalc(struct clk *clk)
+{
+	unsigned long r;
+
+	r = ctrl_inl(clk->arch_flags);
+	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+}
 
 static int sh7722_siu_start_stop(struct clk *clk, int enable)
 {
-	int siu = sh7722_siu_which(clk);
 	unsigned long r;
 
-	if (siu < 0)
-		return siu;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
+	r = ctrl_inl(clk->arch_flags);
 	if (enable)
-		ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]);
+		ctrl_outl(r & ~(1 << 8), clk->arch_flags);
 	else
-		ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]);
+		ctrl_outl(r | (1 << 8), clk->arch_flags);
 	return 0;
 }
 
@@ -458,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk)
 	sh7722_siu_start_stop(clk, 0);
 }
 
+static struct clk_ops sh7722_siu_clk_ops = {
+	.recalc = sh7722_siu_recalc,
+	.set_rate = sh7722_siu_set_rate,
+	.enable = sh7722_siu_enable,
+	.disable = sh7722_siu_disable,
+};
+
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
+
 static void sh7722_video_enable(struct clk *clk)
 {
 	unsigned long r;
@@ -494,43 +504,6 @@ static void sh7722_video_recalc(struct clk *clk)
 	clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
 }
 
-static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
-{
-	int siu = sh7722_siu_which(clk);
-	unsigned long r;
-	int div;
-
-	if (siu < 0)
-		return siu;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
-	div = sh7722_find_divisors(clk->parent->rate, rate);
-	if (div < 0)
-		return div;
-	r = (r & ~0xF) | div;
-	ctrl_outl(r, sh7722_siu_regs[siu]);
-	return 0;
-}
-
-static void sh7722_siu_recalc(struct clk *clk)
-{
-	int siu = sh7722_siu_which(clk);
-	unsigned long r;
-
-	if (siu < 0)
-		return /* siu */ ;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
-	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
-}
-
-static struct clk_ops sh7722_siu_clk_ops = {
-	.recalc = sh7722_siu_recalc,
-	.set_rate = sh7722_siu_set_rate,
-	.enable = sh7722_siu_enable,
-	.disable = sh7722_siu_disable,
-};
-
 static struct clk_ops sh7722_video_clk_ops = {
 	.recalc = sh7722_video_recalc,
 	.set_rate = sh7722_video_set_rate,
@@ -560,6 +533,9 @@ static struct clk sh7722_sdram_clock = {
 	.ops = &sh7722_frqcr_clk_ops,
 };
 
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
 /*
  * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
  * methods of clk_ops determine which register they should access by
@@ -567,36 +543,151 @@ static struct clk sh7722_sdram_clock = {
  */
 static struct clk sh7722_siu_a_clock = {
 	.name = "siu_a_clk",
+	.arch_flags = SCLKACR,
 	.ops = &sh7722_siu_clk_ops,
 };
 
 static struct clk sh7722_siu_b_clock = {
 	.name = "siu_b_clk",
+	.arch_flags = SCLKBCR,
 	.ops = &sh7722_siu_clk_ops,
 };
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 static struct clk sh7722_irda_clock = {
 	.name = "irda_clk",
+	.arch_flags = IrDACLKCR,
 	.ops = &sh7722_siu_clk_ops,
 };
 #endif
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
 
 static struct clk sh7722_video_clock = {
 	.name = "video_clk",
 	.ops = &sh7722_video_clk_ops,
 };
 
+static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg,
+				    int enable)
+{
+	unsigned long bit = clk->arch_flags;
+	unsigned long r;
+
+	r = ctrl_inl(reg);
+
+	if (enable)
+		r &= ~(1 << bit);
+	else
+		r |= (1 << bit);
+
+	ctrl_outl(r, reg);
+	return 0;
+}
+
+static void sh7722_mstpcr0_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR0, 1);
+}
+
+static void sh7722_mstpcr0_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR0, 0);
+}
+
+static void sh7722_mstpcr1_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR1, 1);
+}
+
+static void sh7722_mstpcr1_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR1, 0);
+}
+
+static void sh7722_mstpcr2_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR2, 1);
+}
+
+static void sh7722_mstpcr2_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR2, 0);
+}
+
+static struct clk_ops sh7722_mstpcr0_clk_ops = {
+	.enable = sh7722_mstpcr0_enable,
+	.disable = sh7722_mstpcr0_disable,
+};
+
+static struct clk_ops sh7722_mstpcr1_clk_ops = {
+	.enable = sh7722_mstpcr1_enable,
+	.disable = sh7722_mstpcr1_disable,
+};
+
+static struct clk_ops sh7722_mstpcr2_clk_ops = {
+	.enable = sh7722_mstpcr2_enable,
+	.disable = sh7722_mstpcr2_disable,
+};
+
+#define DECLARE_MSTPCRN(regnr, bitnr, bitstr)		\
+{							\
+	.name = "mstp" __stringify(regnr) bitstr,	\
+	.arch_flags = bitnr,				\
+	.ops = &sh7722_mstpcr ## regnr ## _clk_ops,	\
+}
+
+#define DECLARE_MSTPCR(regnr) \
+	DECLARE_MSTPCRN(regnr, 31, "31"), \
+	DECLARE_MSTPCRN(regnr, 30, "30"), \
+	DECLARE_MSTPCRN(regnr, 29, "29"), \
+	DECLARE_MSTPCRN(regnr, 28, "28"), \
+	DECLARE_MSTPCRN(regnr, 27, "27"), \
+	DECLARE_MSTPCRN(regnr, 26, "26"), \
+	DECLARE_MSTPCRN(regnr, 25, "25"), \
+	DECLARE_MSTPCRN(regnr, 24, "24"), \
+	DECLARE_MSTPCRN(regnr, 23, "23"), \
+	DECLARE_MSTPCRN(regnr, 22, "22"), \
+	DECLARE_MSTPCRN(regnr, 21, "21"), \
+	DECLARE_MSTPCRN(regnr, 20, "20"), \
+	DECLARE_MSTPCRN(regnr, 19, "19"), \
+	DECLARE_MSTPCRN(regnr, 18, "18"), \
+	DECLARE_MSTPCRN(regnr, 17, "17"), \
+	DECLARE_MSTPCRN(regnr, 16, "16"), \
+	DECLARE_MSTPCRN(regnr, 15, "15"), \
+	DECLARE_MSTPCRN(regnr, 14, "14"), \
+	DECLARE_MSTPCRN(regnr, 13, "13"), \
+	DECLARE_MSTPCRN(regnr, 12, "12"), \
+	DECLARE_MSTPCRN(regnr, 11, "11"), \
+	DECLARE_MSTPCRN(regnr, 10, "10"), \
+	DECLARE_MSTPCRN(regnr, 9, "09"), \
+	DECLARE_MSTPCRN(regnr, 8, "08"), \
+	DECLARE_MSTPCRN(regnr, 7, "07"), \
+	DECLARE_MSTPCRN(regnr, 6, "06"), \
+	DECLARE_MSTPCRN(regnr, 5, "05"), \
+	DECLARE_MSTPCRN(regnr, 4, "04"), \
+	DECLARE_MSTPCRN(regnr, 3, "03"), \
+	DECLARE_MSTPCRN(regnr, 2, "02"), \
+	DECLARE_MSTPCRN(regnr, 1, "01"), \
+	DECLARE_MSTPCRN(regnr, 0, "00")
+
+static struct clk sh7722_mstpcr[] = {
+	DECLARE_MSTPCR(0),
+	DECLARE_MSTPCR(1),
+	DECLARE_MSTPCR(2),
+};
+
 static struct clk *sh7722_clocks[] = {
 	&sh7722_umem_clock,
 	&sh7722_sh_clock,
 	&sh7722_peripheral_clock,
 	&sh7722_sdram_clock,
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
 	&sh7722_siu_a_clock,
 	&sh7722_siu_b_clock,
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 	&sh7722_irda_clock,
 #endif
+#endif
 	&sh7722_video_clock,
 };
 
@@ -629,5 +720,11 @@ int __init arch_clk_init(void)
 		clk_register(sh7722_clocks[i]);
 	}
 	clk_put(master);
+
+	for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) {
+		pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name);
+		clk_register(&sh7722_mstpcr[i]);
+	}
+
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6d4f50cd4aa..78881b4214d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -11,6 +11,104 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0x04750000,
+		.end    = 0x04750017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 44,
+		.end    = 47,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -32,16 +130,171 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7343_devices[] __initdata = {
+	&iic0_device,
+	&iic1_device,
 	&sci_device,
+	&vpu_device,
+	&veu_device,
 };
 
 static int __init sh7343_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* URAM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp023"); /* INTC3 */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C0 */
+	clk_always_enable("mstp108"); /* I2C1 */
+	clk_always_enable("mstp202"); /* VEU */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
 __initcall(sh7343_devices_setup);
 
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+	MFI, VPU, TPU, Z3D4, USBI0, USBI1,
+	MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
+	DMAC4, DMAC5, DMAC_DADERR,
+	KEYSC,
+	SCIF, SCIF1, SCIF2, SCIF3, SCIF4,
+	SIOF0, SIOF1, SIO,
+	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+	I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+	SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
+	IRDA,
+	SDHI0, SDHI1, SDHI2, SDHI3,
+	CMT, TSIF, SIU,
+	TMU0, TMU1, TMU2,
+	JPU, LCDC,
+
+	/* interrupt groups */
+
+	DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+	INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
+	INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
+	INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+	INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+	INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+	INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
+	INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
+	INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
+	INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
+	INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
+	INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+	INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
+	INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
+	INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
+	INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
+	INTC_VECT(SIO, 0xd00),
+	INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+	INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
+	INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
+	INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
+	INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+	INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+	INTC_VECT(SIU, 0xf80),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),
+	INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+	INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+	INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
+	INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+	INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+	INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
+	INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
+	INTC_GROUP(USB, USBI0, USBI1),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, 0, 0, 0, MFI } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
+
 void __init plat_irq_setup(void)
 {
+	register_intc_controller(&intc_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index f26b5cdad0d..6851dba02f3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -13,6 +13,112 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU(1)",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU(2)",
+		.start	= 0xfe924000,
+		.end	= 0xfe9240b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -34,11 +140,32 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7366_devices[] __initdata = {
+	&iic_device,
 	&sci_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
 };
 
 static int __init sh7366_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* RSMEM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp023"); /* INTC3 */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp207"); /* VEU-2 */
+	clk_always_enable("mstp202"); /* VEU-1 */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
@@ -97,7 +224,7 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(SIU, 0xf80),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
 	INTC_VECT(TMU2, 0x440),
-	INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
+	INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
 };
 
 static struct intc_group groups[] __initdata = {
@@ -163,8 +290,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 62ebccf18b3..de1ede92176 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -12,6 +12,8 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
 static struct resource usbf_resources[] = {
@@ -59,6 +61,62 @@ static struct platform_device iic_device = {
 	.resource       = iic_resources,
 };
 
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -95,10 +153,27 @@ static struct platform_device *sh7722_devices[] __initdata = {
 	&usbf_device,
 	&iic_device,
 	&sci_device,
+	&vpu_device,
+	&veu_device,
 };
 
 static int __init sh7722_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* URAM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp211"); /* USB */
+	clk_always_enable("mstp202"); /* VEU */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
@@ -229,8 +304,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index a0470f2f547..a7412cede53 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -12,8 +12,94 @@
 #include <linux/serial.h>
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU2H",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU2H0",
+		.start	= 0xfe920000,
+		.end	= 0xfe92027b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU2H",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU2H1",
+		.start	= 0xfe924000,
+		.end	= 0xfe92427b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase        = 0xffe00000,
@@ -113,14 +199,56 @@ static struct platform_device sh7723_usb_host_device = {
 	.resource	= sh7723_usb_host_resources,
 };
 
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
 	&sci_device,
 	&rtc_device,
+	&iic_device,
 	&sh7723_usb_host_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
 };
 
 static int __init sh7723_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp024"); /* FPU */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp000"); /* MERAM */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp108"); /* RTC */
+	clk_always_enable("mstp211"); /* USB */
+	clk_always_enable("mstp206"); /* VEU2H1 */
+	clk_always_enable("mstp202"); /* VEU2H0 */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
@@ -326,8 +454,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f189a559462..3c5b629887a 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2006  Paul Mundt
  *  Copyright (C) 2007  Yoshihiro Shimoda
+ *  Copyright (C) 2008  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = {
 		.type		= PORT_SCIF,
 		.irqs		= { 76, 77, 79, 78 },
 	}, {
+		.mapbase	= 0xffe10000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 104, 105, 107, 106 },
+	}, {
 		.flags = 0,
 	}
 };
@@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
 	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
 	INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
-	INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20),
-	INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60),
+	INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
+	INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
 	INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
 	INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
 };
@@ -290,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-			NULL, irq_mask_registers, irq_prio_registers,
-			irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
 
 
 /* External interrupt pins in IRL mode */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 18dbbe23fea..fb8200cc744 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors,
-			 NULL, irq_mask_registers, irq_prio_registers,
-			 irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 621e7329ec6..30baa63b24c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123,
-			 NULL, mask_registers, prio_registers,
-			 sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
 
-static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567,
-			 NULL, mask_registers, prio_registers,
-			 sense_registers);
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 05372ed6c56..e640c63d581 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -2,7 +2,7 @@
  * arch/sh/kernel/cpu/sh5/entry.S
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004 - 2007  Paul Mundt
+ * Copyright (C) 2004 - 2008  Paul Mundt
  * Copyright (C) 2003, 2004  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -11,7 +11,7 @@
  */
 #include <linux/errno.h>
 #include <linux/sys.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/processor.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
@@ -923,6 +923,8 @@ ret_from_exception:
 	blink   tr0, ZERO
 
 resume_kernel:
+	CLI()
+
 	pta	restore_all, tr0
 
 	getcon	KCR0, r6
@@ -939,19 +941,11 @@ need_resched:
 	andi	r7, 0xf0, r7
 	bne	r7, ZERO, tr0
 
-	movi	((PREEMPT_ACTIVE >> 16) & 65535), r8
-	shori	(PREEMPT_ACTIVE & 65535), r8
-	st.l	r6, TI_PRE_COUNT, r8
-
-	STI()
-	movi	schedule, r7
+	movi	preempt_schedule_irq, r7
 	ori	r7, 1, r7
 	ptabs	r7, tr1
 	blink	tr1, LINK
 
-	st.l	r6, TI_PRE_COUNT, ZERO
-	CLI()
-
 	pta	need_resched, tr1
 	blink	tr1, ZERO
 #endif
@@ -987,11 +981,11 @@ work_resched:
 work_notifysig:
 	gettr	tr1, LINK
 
-	movi	do_signal, r6
+	movi	do_notify_resume, r6
 	ptabs	r6, tr0
 	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
-	blink	tr0, LINK	    /* Call do_signal(regs, 0), return here */
+	or	r7, ZERO, r3
+	blink	tr0, LINK	    /* Call do_notify_resume(regs, current_thread_info->flags), return here */
 
 restore_all:
 	/* Do prefetches */
@@ -1300,18 +1294,20 @@ syscall_allowed:
 
 	getcon	KCR0, r2
 	ld.l	r2, TI_FLAGS, r4
-	movi	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT), r6
+	movi	_TIF_WORK_SYSCALL_MASK, r6
 	and	r6, r4, r6
 	beq/l	r6, ZERO, tr0
 
 	/* Trace it by calling syscall_trace before and after */
-	movi	syscall_trace, r4
+	movi	do_syscall_trace_enter, r4
 	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
 	ptabs	r4, tr0
 	blink	tr0, LINK
 
-	/* Reload syscall number as r5 is trashed by syscall_trace */
+	/* Save the retval */
+	st.q	SP, FRAME_R(2), r2
+
+	/* Reload syscall number as r5 is trashed by do_syscall_trace_enter */
 	ld.q	SP, FRAME_S(FSYSCALL_ID), r5
 	andi	r5, 0x1ff, r5
 
@@ -1343,9 +1339,8 @@ syscall_ret_trace:
 	/* We get back here only if under trace */
 	st.q	SP, FRAME_R(9), r2	/* Save return value */
 
-	movi	syscall_trace, LINK
+	movi	do_syscall_trace_leave, LINK
 	or	SP, ZERO, r2
-	movi	1, r3
 	ptabs	LINK, tr0
 	blink	tr0, LINK
 
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 718bd2356b3..efbb4268875 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -92,6 +92,7 @@ ENTRY(ret_from_irq)
 	bra	resume_userspace
 	 nop
 ENTRY(resume_kernel)
+	cli
 	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
 	tst	r0, r0
 	bf	noresched
@@ -105,28 +106,9 @@ need_resched:
 	and	#0xf0, r0		! interrupts off (exception path)?
 	cmp/eq	#0xf0, r0
 	bt	noresched
-
-	mov.l	1f, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
 	mov.l	3f, r0
-	jsr	@r0
-	 nop
-#endif
-	sti
-	mov.l	2f, r0
-	jsr	@r0
-	 nop
-	mov	#0, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	4f, r0
-	jsr	@r0
+	jsr	@r0			! call preempt_schedule_irq
 	 nop
-#endif
-
 	bra	need_resched
 	 nop
 
@@ -137,10 +119,7 @@ noresched:
 	.align 2
 1:	.long	PREEMPT_ACTIVE
 2:	.long	schedule
-#ifdef CONFIG_TRACE_IRQFLAGS
-3:	.long	trace_hardirqs_on
-4:	.long	trace_hardirqs_off
-#endif
+3:	.long	preempt_schedule_irq
 #endif
 
 ENTRY(resume_userspace)
@@ -192,7 +171,7 @@ work_resched:
 	.align	2
 1:	.long	schedule
 2:	.long	do_notify_resume
-3:	.long	restore_all
+3:	.long	resume_userspace
 #ifdef CONFIG_TRACE_IRQFLAGS
 4:	.long	trace_hardirqs_on
 5:	.long	trace_hardirqs_off
@@ -202,7 +181,7 @@ work_resched:
 syscall_exit_work:
 	! r0: current_thread_info->flags
 	! r8: current_thread_info
-	tst	#_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0
+	tst	#_TIF_WORK_SYSCALL_MASK, r0
 	bt/s	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -211,10 +190,8 @@ syscall_exit_work:
 	 nop
 #endif
 	sti
-	! XXX setup arguments...
 	mov	r15, r4
-	mov	#1, r5
-	mov.l	4f, r0			! do_syscall_trace
+	mov.l	8f, r0			! do_syscall_trace_leave
 	jsr	@r0
 	 nop
 	bra	resume_userspace
@@ -223,12 +200,11 @@ syscall_exit_work:
 	.align	2
 syscall_trace_entry:
 	!                     	Yes it is traced.
-	! XXX setup arguments...
 	mov     r15, r4
-	mov     #0, r5
-	mov.l	4f, r11		! Call do_syscall_trace which notifies
+	mov.l	7f, r11		! Call do_syscall_trace_enter which notifies
 	jsr	@r11	    	! superior (will chomp R[0-7])
 	 nop
+	mov.l	r0, @(OFF_R0,r15)	! Save return value
 	!			Reload R0-R4 from kernel stack, where the
 	!   	    	    	parent may have modified them using
 	!   	    	    	ptrace(POKEUSR).  (Note that R0-R2 are
@@ -351,7 +327,7 @@ ENTRY(system_call)
 	!
 	get_current_thread_info r8, r10
 	mov.l	@(TI_FLAGS,r8), r8
-	mov	#(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10
+	mov	#_TIF_WORK_SYSCALL_MASK, r10
 	tst	r10, r8
 	bf	syscall_trace_entry
 	!
@@ -389,8 +365,9 @@ syscall_exit:
 #endif
 2:	.long	NR_syscalls
 3:	.long	sys_call_table
-4:	.long	do_syscall_trace
 #ifdef CONFIG_TRACE_IRQFLAGS
 5:	.long	trace_hardirqs_on
 6:	.long	trace_hardirqs_off
 #endif
+7:	.long	do_syscall_trace_enter
+8:	.long	do_syscall_trace_leave
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index f42d4c0feb7..7ccfb995a39 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -11,8 +11,8 @@
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/tlb.h>
-#include <asm/cpu/registers.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
 #include <asm/thread_info.h>
 
 /*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index a2a99e487e3..64b7690c664 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -15,7 +15,7 @@
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 atomic_t irq_err_count;
 
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5c17de51987..94df56b0d1f 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/kexec.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
+#include <linux/numa.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
@@ -70,7 +71,7 @@ static void kexec_info(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 
 	unsigned long page_list;
@@ -101,6 +102,13 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+	(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
 }
 
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_NUMA
+	VMCOREINFO_SYMBOL(node_data);
+	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
+#endif
+}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index 5482e65375a..c43081039dd 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -27,6 +27,7 @@
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
+#include <linux/bug.h>
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
@@ -36,7 +37,8 @@ void *module_alloc(unsigned long size)
 {
 	if (size == 0)
 		return NULL;
-	return vmalloc(size);
+
+	return vmalloc_exec(size);
 }
 
 
@@ -145,9 +147,10 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index b98e37a1f54..3326a45749d 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -34,18 +34,6 @@ void (*pm_idle)(void);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-EXPORT_SYMBOL(enable_hlt);
-
 static int __init nohlt_setup(char *__unused)
 {
 	hlt_counter = 1;
@@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused)
 }
 __setup("hlt", hlt_setup);
 
-void default_idle(void)
+static void default_idle(void)
 {
 	if (!hlt_counter) {
 		clear_thread_flag(TIF_POLLING_NRFLAG);
@@ -86,7 +74,7 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 0283d813307..b9dbd2d3b4a 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -36,16 +36,6 @@ static int hlt_counter = 1;
 
 #define HARD_IDLE_TIMEOUT (HZ / 3)
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
 static int __init nohlt_setup(char *__unused)
 {
 	hlt_counter = 1;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index fddb547f3c2..035cb300d3d 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -20,6 +20,8 @@
 #include <linux/signal.h>
 #include <linux/io.h>
 #include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -57,7 +59,23 @@ static inline int put_stack_long(struct task_struct *task, int offset,
 	return 0;
 }
 
-static void ptrace_disable_singlestep(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	long pc;
+
+	pc = get_stack_long(child, (long)&regs->pc);
+
+	/* Next scheduling will set up UBC */
+	if (child->thread.ubc_pc == 0)
+		ubc_usercnt += 1;
+
+	child->thread.ubc_pc = pc;
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
 {
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 
@@ -81,7 +99,7 @@ static void ptrace_disable_singlestep(struct task_struct *child)
  */
 void ptrace_disable(struct task_struct *child)
 {
-	ptrace_disable_singlestep(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -90,12 +108,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		unsigned long tmp;
@@ -125,12 +137,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 		ret = -EIO;
 		if ((addr & 3) || addr < 0 ||
@@ -151,67 +157,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		ptrace_disable_singlestep(child);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		ptrace_disable_singlestep(child);
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		long pc;
-		struct pt_regs *regs = NULL;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
-
-		pc = get_stack_long(child, (long)&regs->pc);
-
-		/* Next scheduling will set up UBC */
-		if (child->thread.ubc_pc == 0)
-			ubc_usercnt += 1;
-		child->thread.ubc_pc = pc;
-
-		set_tsk_thread_flag(child, TIF_SINGLESTEP);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 #ifdef CONFIG_SH_DSP
 	case PTRACE_GETDSPREGS: {
 		unsigned long dp;
@@ -241,6 +186,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 #endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	case PTRACE_GETFDPIC: {
+		unsigned long tmp = 0;
+
+		switch (addr) {
+		case PTRACE_GETFDPIC_EXEC:
+			tmp = child->mm->context.exec_fdpic_loadmap;
+			break;
+		case PTRACE_GETFDPIC_INTERP:
+			tmp = child->mm->context.interp_fdpic_loadmap;
+			break;
+		default:
+			break;
+		}
+
+		ret = 0;
+		if (put_user(tmp, (unsigned long *) data)) {
+			ret = -EFAULT;
+			break;
+		}
+		break;
+	}
+#endif
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -249,39 +217,49 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+static inline int audit_arch(void)
 {
-	struct task_struct *tsk = current;
+	int arch = EM_SH;
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
-				   regs->regs[0]);
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		goto out;
-	if (!(tsk->ptrace & PT_PTRACED))
-		goto out;
+	return arch;
+}
 
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
-				 !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long ret = 0;
 
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (tsk->exit_code) {
-		send_sig(tsk->exit_code, tsk, 1);
-		tsk->exit_code = 0;
-	}
+	secure_computing(regs->regs[0]);
 
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3],
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1L;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(audit_arch(), regs->regs[3],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 
+	return ret ?: regs->regs[0];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
+				   regs->regs[0]);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index d453c47dc52..9c6424892bd 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -27,6 +27,8 @@
 #include <linux/signal.h>
 #include <linux/syscalls.h>
 #include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -120,18 +122,25 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = child->thread.uregs;
+
+	regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = child->thread.uregs;
+
+	regs->sr &= ~SR_SSTEP;
+}
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		unsigned long tmp;
@@ -154,12 +163,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR:
                 /* write the word at location addr in the USER area. We must
                    disallow any changes to certain SR bits or u_fpvalid, since
@@ -191,58 +194,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		struct pt_regs *regs;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
-
-		regs = child->thread.uregs;
-
-		regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
-
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -273,38 +224,51 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data)
 	return sys_ptrace(request, pid, addr, data);
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit)
+static inline int audit_arch(void)
 {
-	struct task_struct *tsk = current;
+	int arch = EM_SH;
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
-				   regs->regs[9]);
+#ifdef CONFIG_64BIT
+	arch |= __AUDIT_ARCH_64BIT;
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		goto out;
-	if (!(tsk->ptrace & PT_PTRACED))
-		goto out;
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
-				!test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (tsk->exit_code) {
-		send_sig(tsk->exit_code, tsk, 1);
-		tsk->exit_code = 0;
-	}
+	return arch;
+}
+
+asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long long ret = 0;
 
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1],
+	secure_computing(regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1LL;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(audit_arch(), regs->regs[1],
 				    regs->regs[2], regs->regs[3],
 				    regs->regs[4], regs->regs[5]);
+
+	return ret ?: regs->regs[9];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
+				   regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
 }
 
 /* Called with interrupts disabled */
@@ -338,5 +302,5 @@ asmlinkage void do_software_break_point(unsigned long long vec,
  */
 void ptrace_disable(struct task_struct *child)
 {
-        /* nothing to do.. */
+	user_disable_single_step(child);
 }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index bca2bbc575d..de832056bf1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/err.h>
 #include <linux/debugfs.h>
+#include <linux/crash_dump.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -170,6 +171,7 @@ static void __init reserve_crashkernel(void)
 				(unsigned long)(free_mem >> 20));
 		crashk_res.start = crash_base;
 		crashk_res.end   = crash_base + crash_size - 1;
+		insert_resource(&iomem_resource, &crashk_res);
 	}
 }
 #else
@@ -203,11 +205,6 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	request_resource(res, &data_resource);
 	request_resource(res, &bss_resource);
 
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start != crashk_res.end)
-		request_resource(res, &crashk_res);
-#endif
-
 	add_active_range(nid, start_pfn, end_pfn);
 }
 
@@ -286,6 +283,25 @@ static void __init setup_memory(void)
 extern void __init setup_memory(void);
 #endif
 
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+#ifdef CONFIG_CRASH_DUMP
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+	elfcorehdr_addr = memparse(arg, &arg);
+	return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif
+
 void __init setup_arch(char **cmdline_p)
 {
 	enable_mmu();
@@ -398,6 +414,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c)
 {
 	return cpu_name[c->type];
 }
+EXPORT_SYMBOL(get_cpu_subtype);
 
 #ifdef CONFIG_PROC_FS
 /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
@@ -452,6 +469,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "processor\t: %d\n", cpu);
 	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
 	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+	if (c->cut_major == -1)
+		seq_printf(m, "cut\t\t: unknown\n");
+	else if (c->cut_minor == -1)
+		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+	else
+		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
 
 	show_cpuflags(m, c);
 
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8f916536719..6e1b1c27165 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -107,10 +107,12 @@ DECLARE_EXPORT(__movmemSI12_i4);
  * GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
  * compiler which include backported patches.
  */
-DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udiv_qrnnd_16);
+#if !defined(CONFIG_CPU_SH2)
+DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udivsi3_i4i);
 #endif
+#endif
 #else /* GCC 3.x */
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f311551d9a0..51689d29ad4 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -24,6 +24,7 @@
 #include <linux/binfmts.h>
 #include <linux/freezer.h>
 #include <linux/io.h>
+#include <linux/tracehook.h>
 #include <asm/system.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
@@ -33,6 +34,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+struct fdpic_func_descriptor {
+	unsigned long	text;
+	unsigned long	GOT;
+};
+
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -368,6 +374,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 		err |= __put_user(OR_R0_R0, &frame->retcode[6]);
 		err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
 		regs->pr = (unsigned long) frame->retcode;
+		flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 	}
 
 	if (err)
@@ -378,18 +385,21 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->regs[4] = signal; /* Arg for signal handler */
 	regs->regs[5] = 0;
 	regs->regs[6] = (unsigned long) &frame->sc;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+		__get_user(regs->pc, &funcptr->text);
+		__get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ka->sa.sa_handler;
 
 	set_fs(USER_DS);
 
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_cache_sigtramp(regs->pr);
-
-	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
-
 	return 0;
 
 give_sigsegv:
@@ -458,17 +468,22 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->regs[4] = signal; /* Arg for signal handler */
 	regs->regs[5] = (unsigned long) &frame->info;
 	regs->regs[6] = (unsigned long) &frame->uc;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+		__get_user(regs->pc, &funcptr->text);
+		__get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ka->sa.sa_handler;
 
 	set_fs(USER_DS);
 
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_cache_sigtramp(regs->pr);
-
-	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
+	flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 
 	return 0;
 
@@ -493,14 +508,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 		switch (regs->regs[0]) {
 			case -ERESTART_RESTARTBLOCK:
 			case -ERESTARTNOHAND:
+			no_system_call_restart:
 				regs->regs[0] = -EINTR;
 				break;
 
 			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->regs[0] = -EINTR;
-					break;
-				}
+				if (!(ka->sa.sa_flags & SA_RESTART))
+					goto no_system_call_restart;
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				regs->regs[0] = save_r0;
@@ -575,12 +589,15 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+					test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
 	}
 
- no_signal:
+no_signal:
 	/* Did we come from a system call? */
 	if (regs->tra >= 0) {
 		/* Restart the system call - no handlers present */
@@ -604,9 +621,14 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 }
 
 asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
-				 __u32 thread_info_flags)
+				 unsigned long thread_info_flags)
 {
 	/* deal with pending signal delivery */
-	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs, save_r0);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 552eb810cd8..1d62dfef77f 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -22,6 +22,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -42,7 +43,84 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static int do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return 1;
+
+	if (try_to_freeze())
+		goto no_signal;
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else if (!oldset)
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, 0);
+
+	if (signr > 0) {
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(signr, &info, &ka, oldset, regs);
+
+		/*
+		 * If a signal was successfully delivered, the saved sigmask
+		 * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
+		 * flag.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		return 1;
+	}
+
+no_signal:
+	/* Did we come from a system call? */
+	if (regs->syscall_nr >= 0) {
+		/* Restart the system call - no handlers present */
+		switch (regs->regs[REG_RET]) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			/* Decode Syscall # */
+			regs->regs[REG_RET] = regs->syscall_nr;
+			regs->pc -= 4;
+			break;
+
+		case -ERESTART_RESTARTBLOCK:
+			regs->regs[REG_RET] = __NR_restart_syscall;
+			regs->pc -= 4;
+			break;
+		}
+	}
+
+	/* No signal to deliver -- put the saved sigmask back */
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
+	return 0;
+}
 
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
@@ -643,14 +721,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 		switch (regs->regs[REG_RET]) {
 			case -ERESTART_RESTARTBLOCK:
 			case -ERESTARTNOHAND:
+			no_system_call_restart:
 				regs->regs[REG_RET] = -EINTR;
 				break;
 
 			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->regs[REG_RET] = -EINTR;
-					break;
-				}
+				if (!(ka->sa.sa_flags & SA_RESTART))
+					goto no_system_call_restart;
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				/* Decode syscall # */
@@ -673,80 +750,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	spin_unlock_irq(&current->sighand->siglock);
 }
 
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return 1;
-
-	if (try_to_freeze())
-		goto no_signal;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else if (!oldset)
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, 0);
-
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs, 0);
 
-		/*
-		 * If a signal was successfully delivered, the saved sigmask
-		 * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
-		 * flag.
-		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-
-		return 1;
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
 	}
-
-no_signal:
-	/* Did we come from a system call? */
-	if (regs->syscall_nr >= 0) {
-		/* Restart the system call - no handlers present */
-		switch (regs->regs[REG_RET]) {
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			/* Decode Syscall # */
-			regs->regs[REG_RET] = regs->syscall_nr;
-			regs->pc -= 4;
-			break;
-
-		case -ERESTART_RESTARTBLOCK:
-			regs->regs[REG_RET] = __NR_restart_syscall;
-			regs->pc -= 4;
-			break;
-		}
-	}
-
-	/* No signal to deliver -- put the saved sigmask back */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-
-	return 0;
 }
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 1b2ae35c4a7..54d1f61aa00 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -12,6 +12,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 #include <asm/ptrace.h>
 
 /*
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 59cd2859ce9..9061b86d73f 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -170,7 +170,7 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	version = call >> 16; /* hack for backward compatibility */
 	call &= 0xffff;
 
-	if (call <= SEMCTL)
+	if (call <= SEMTIMEDOP)
 		switch (call) {
 		case SEMOP:
 			return sys_semtimedop(first,
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index 125e493ead8..f0aa5c39865 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -29,7 +29,7 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (!error) {
 		regs->regs[1] = fd[1];
 		return fd[0];
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index a46cc3a4114..0af693e6576 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -343,3 +343,9 @@ ENTRY(sys_call_table)
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index d5d7843aad9..0b436aa3cad 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -381,3 +381,9 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4		/* 355 */
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1		/* 360 */
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 7281342c044..0758b5ee818 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0;
 
 #define NSEC_PER_CYC_SHIFT	10
 
-struct clocksource clocksource_sh = {
+static struct clocksource clocksource_sh = {
 	.name		= "SuperH",
 	.rating		= 200,
 	.mask		= CLOCKSOURCE_MASK(32),
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 022a55f1c1d..791edabf7d8 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -33,8 +33,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <asm/cpu/registers.h>	 /* required by inline __asm__ stmt. */
-#include <asm/cpu/irq.h>
+#include <cpu/registers.h>	 /* required by inline __asm__ stmt. */
+#include <cpu/irq.h>
 #include <asm/addrspace.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 8935570008d..1ca9ad49b54 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -209,7 +209,7 @@ static int tmu_timer_init(void)
 	return 0;
 }
 
-struct sys_timer_ops tmu_timer_ops = {
+static struct sys_timer_ops tmu_timer_ops = {
 	.init		= tmu_timer_init,
 	.start		= tmu_timer_start,
 	.stop		= tmu_timer_stop,
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index e08b3bfeb65..511a9426cec 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -43,6 +43,7 @@
 # define TRAP_ILLEGAL_SLOT_INST	6
 # define TRAP_ADDRESS_ERROR	9
 # ifdef CONFIG_CPU_SH2A
+#  define TRAP_FPU_ERROR	13
 #  define TRAP_DIVZERO_ERROR	17
 #  define TRAP_DIVOVF_ERROR	18
 # endif
@@ -851,6 +852,9 @@ void __init trap_init(void)
 #ifdef CONFIG_CPU_SH2A
 	set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
 	set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
+#ifdef CONFIG_SH_FPU
+	set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
+#endif
 #endif
 
 	/* Setup VBR for boot cpu */
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index ebb55d1149f..8596cc78e18 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -2,9 +2,11 @@
 # Makefile for SuperH-specific library files..
 #
 
-lib-y  = delay.o io.o memset.o memmove.o memchr.o \
+lib-y  = delay.o memset.o memmove.o memchr.o \
 	 checksum.o strlen.o div64.o div64-generic.o
 
+obj-y				+= io.o
+
 memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
index ff559e2a96f..da32ba7b5fc 100644
--- a/arch/sh/lib64/panic.c
+++ b/arch/sh/lib64/panic.c
@@ -8,7 +8,7 @@
 
 #include <linux/kernel.h>
 #include <asm/io.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* THIS IS A PHYSICAL ADDRESS */
 #define HDSP2534_ADDR (0x04002100)
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 5fd218430b1..8a03926ea84 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -145,32 +145,48 @@ choice
 
 config PAGE_SIZE_4KB
 	bool "4kB"
-	depends on !X2TLB
+	depends on !MMU || !X2TLB
 	help
 	  This is the default page size used by all SuperH CPUs.
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on X2TLB
+	depends on !MMU || X2TLB
 	help
 	  This enables 8kB pages as supported by SH-X2 and later MMUs.
 
+config PAGE_SIZE_16KB
+	bool "16kB"
+	depends on !MMU
+	help
+	  This enables 16kB pages on MMU-less SH systems.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
-	depends on CPU_SH4 || CPU_SH5
+	depends on !MMU || CPU_SH4 || CPU_SH5
 	help
 	  This enables support for 64kB pages, possible on all SH-4
 	  CPUs and later.
 
 endchoice
 
+config ENTRY_OFFSET
+	hex
+	default "0x00001000" if PAGE_SIZE_4KB
+	default "0x00002000" if PAGE_SIZE_8KB
+	default "0x00004000" if PAGE_SIZE_16KB
+	default "0x00010000" if PAGE_SIZE_64KB
+	default "0x00000000"
+
 choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+	default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
 	default HUGETLB_PAGE_SIZE_64K
 
 config HUGETLB_PAGE_SIZE_64K
 	bool "64kB"
+	depends on !PAGE_SIZE_64KB
 
 config HUGETLB_PAGE_SIZE_256K
 	bool "256kB"
@@ -223,7 +239,6 @@ choice
 
 config CACHE_WRITEBACK
 	bool "Write-back"
-	depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
 
 config CACHE_WRITETHROUGH
 	bool "Write-through"
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index e295db60b91..70e0906023c 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -5,12 +5,15 @@
 obj-y			:= init.o extable_32.o consistent.o
 
 ifndef CONFIG_CACHE_OFF
-obj-$(CONFIG_CPU_SH2)		+= cache-sh2.o
-obj-$(CONFIG_CPU_SH3)		+= cache-sh3.o
-obj-$(CONFIG_CPU_SH4)		+= cache-sh4.o
-obj-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+cache-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cache-$(CONFIG_CPU_SH2A)	:= cache-sh2a.o
+cache-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o
+cache-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 endif
 
+obj-y			+= $(cache-y)
+
 mmu-y			:= tlb-nommu.o pg-nommu.o
 mmu-$(CONFIG_MMU)	:= fault_32.o tlbflush_32.o ioremap_32.o
 
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index c5b56d52b7d..0e189ccd4a7 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = {
 	.open		= cache_debugfs_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
 static int __init cache_debugfs_init(void)
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 6614033f6be..c4e80d2b764 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -2,6 +2,7 @@
  * arch/sh/mm/cache-sh2.c
  *
  * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2008 Yoshinori Sato
  *
  * Released under the terms of the GNU GPL v2.0.
  */
@@ -24,8 +25,15 @@ void __flush_wback_region(void *start, int size)
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		/* FIXME cache purge */
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(addr | (way << 12));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, addr | (way << 12));
+			}
+		}
 	}
 }
 
@@ -37,21 +45,40 @@ void __flush_purge_region(void *start, int size)
 	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
-	}
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 }
 
 void __flush_invalidate_region(void *start, int size)
 {
+#ifdef CONFIG_CACHE_WRITEBACK
+	/*
+	 * SH-2 does not support individual line invalidation, only a
+	 * global invalidate.
+	 */
+	unsigned long ccr;
+	unsigned long flags;
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	ccr = ctrl_inl(CCR);
+	ccr |= CCR_CACHE_INVALIDATE;
+	ctrl_outl(ccr, CCR);
+
+	back_to_cached();
+	local_irq_restore(flags);
+#else
 	unsigned long v;
 	unsigned long begin, end;
 
 	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
-	}
-}
 
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+#endif
+}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
new file mode 100644
index 00000000000..62c0c5f3512
--- /dev/null
+++ b/arch/sh/mm/cache-sh2a.c
@@ -0,0 +1,129 @@
+/*
+ * arch/sh/mm/cache-sh2a.c
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+void __flush_wback_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(addr | (way << 11));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, addr | (way << 11));
+			}
+		}
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	local_irq_save(flags);
+	jump_to_uncached();
+
+#ifdef CONFIG_CACHE_WRITEBACK
+	ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+	/* I-cache invalidate */
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+#else
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+#endif
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+/* WBack O-Cache and flush I-Cache */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	unsigned long v;
+	unsigned long flags;
+
+	start = start & ~(L1_CACHE_BYTES-1);
+	end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = start; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = (v & 0x000007f0);
+		int way;
+		/* O-Cache writeback */
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			}
+		}
+		/* I-Cache invalidate */
+		ctrl_outl(addr,
+			  CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 43d7ff6b6ec..1fdc8d90254 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -4,6 +4,7 @@
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  * Copyright (C) 2001 - 2007  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
+ * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -22,6 +23,7 @@
  * entirety.
  */
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
+#define MAX_ICACHE_PAGES	32
 
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent);
@@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size)
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
+ * Called from kernel/module.c:sys_init_module and routine for a.out format,
+ * signal handler code and kprobes code
  */
 void flush_icache_range(unsigned long start, unsigned long end)
 {
-	flush_cache_all();
-}
-
-/*
- * Write back the D-cache and purge the I-cache for signal trampoline.
- * .. which happens to be the same behavior as flush_icache_range().
- * So, we simply flush out a line.
- */
-void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr)
-{
-	unsigned long v, index;
-	unsigned long flags;
+	int icacheaddr;
+	unsigned long flags, v;
 	int i;
 
-	v = addr & ~(L1_CACHE_BYTES-1);
-	asm volatile("ocbwb	%0"
-		     : /* no output */
-		     : "m" (__m(v)));
-
-	index = CACHE_IC_ADDRESS_ARRAY |
-			(v & boot_cpu_data.icache.entry_mask);
-
-	local_irq_save(flags);
-	jump_to_uncached();
-
-	for (i = 0; i < boot_cpu_data.icache.ways;
-	     i++, index += boot_cpu_data.icache.way_incr)
-		ctrl_outl(0, index);	/* Clear out Valid-bit */
-
-	back_to_cached();
-	wmb();
-	local_irq_restore(flags);
+       /* If there are too many pages then just blow the caches */
+        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+                flush_cache_all();
+       } else {
+               /* selectively flush d-cache then invalidate the i-cache */
+               /* this is inefficient, so only use for small ranges */
+               start &= ~(L1_CACHE_BYTES-1);
+               end += L1_CACHE_BYTES-1;
+               end &= ~(L1_CACHE_BYTES-1);
+
+               local_irq_save(flags);
+               jump_to_uncached();
+
+               for (v = start; v < end; v+=L1_CACHE_BYTES) {
+                       asm volatile("ocbwb     %0"
+                                    : /* no output */
+                                    : "m" (__m(v)));
+
+                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
+                                       v & cpu_data->icache.entry_mask);
+
+                       for (i = 0; i < cpu_data->icache.ways;
+                               i++, icacheaddr += cpu_data->icache.way_incr)
+                                       /* Clear i-cache line valid-bit */
+                                       ctrl_outl(0, icacheaddr);
+               }
+
+		back_to_cached();
+		local_irq_restore(flags);
+	}
 }
 
 static inline void flush_cache_4096(unsigned long start,
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index d3c33fc5b1c..64b8f7f96f9 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -10,6 +10,7 @@
  * for more details.
  */
 #include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
@@ -27,21 +28,10 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret, *ret_nocache;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
 
 	ret = (void *)__get_free_pages(gfp, order);
 	if (!ret)
@@ -71,11 +61,7 @@ void dma_free_coherent(struct device *dev, size_t size,
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else {
+	if (!dma_release_from_coherent(dev, order, vaddr)) {
 		WARN_ON(irqs_disabled());	/* for portability */
 		BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE);
 		free_pages((unsigned long)phys_to_virt(dma_handle), order);
@@ -84,83 +70,6 @@ void dma_free_coherent(struct device *dev, size_t size,
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap_nocache(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if (!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction direction)
 {
@@ -185,3 +94,59 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	}
 }
 EXPORT_SYMBOL(dma_cache_sync);
+
+static int __init memchunk_setup(char *str)
+{
+	return 1; /* accept anything that begins with "memchunk." */
+}
+__setup("memchunk.", memchunk_setup);
+
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
+{
+	char *p = boot_command_line;
+	int k = strlen(name);
+
+	while ((p = strstr(p, "memchunk."))) {
+		p += 9; /* strlen("memchunk.") */
+		if (!strncmp(name, p, k) && p[k] == '=') {
+			p += k + 1;
+			*sizep = memparse(p, NULL);
+			pr_info("%s: forcing memory chunk size to 0x%08lx\n",
+				name, *sizep);
+			break;
+		}
+	}
+}
+
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+					  char *name, unsigned long memsize)
+{
+	struct resource *r;
+	dma_addr_t dma_handle;
+	void *buf;
+
+	r = pdev->resource + pdev->num_resources - 1;
+	if (r->flags) {
+		pr_warning("%s: unable to find empty space for resource\n",
+			name);
+		return -EINVAL;
+	}
+
+	memchunk_cmdline_override(name, &memsize);
+	if (!memsize)
+		return 0;
+
+	buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_warning("%s: unable to allocate memory\n", name);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, memsize);
+
+	r->flags = IORESOURCE_MEM;
+	r->start = dma_handle;
+	r->end = r->start + memsize - 1;
+	r->name = name;
+	return 0;
+}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index d1fa27594c6..0c776fdfbdd 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	int fault;
 	siginfo_t info;
 
-	trace_hardirqs_on();
-	local_irq_enable();
-
 #ifdef CONFIG_SH_KGDB
 	if (kgdb_nofault && kgdb_bus_err_hook)
 		kgdb_bus_err_hook();
 #endif
 
 	tsk = current;
-	mm = tsk->mm;
 	si_code = SEGV_MAPERR;
 
 	if (unlikely(address >= TASK_SIZE)) {
@@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	/* Only enable interrupts if they were on before the fault */
+	if ((regs->sr & SR_IMASK) != SR_IMASK) {
+		trace_hardirqs_on();
+		local_irq_enable();
+	}
+
+	mm = tsk->mm;
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index 399d53710d2..bd63b961b2a 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -39,7 +39,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* Callable from fault.c, so not static */
 inline void __do_tlb_refill(unsigned long address,
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index ae8c321d6e2..9304117039c 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -22,7 +22,8 @@
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -78,6 +79,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index d7df26bd1e5..b75a7acd62f 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 unsigned long cached_to_uncached = 0;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, free = 0;
-	int shared = 0, cached = 0, slab = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags, i;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	printk("%d pages of RAM\n", total);
-	printk("%d free pages\n", free);
-	printk("%d reserved pages\n", reserved);
-	printk("%d slab pages\n", slab);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-	printk(KERN_INFO "Total of %ld pages in page table cache\n",
-	       quicklist_total_size());
-}
-
 #ifdef CONFIG_MMU
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 {
@@ -191,7 +150,7 @@ void __init paging_init(void)
 		pg_data_t *pgdat = NODE_DATA(nid);
 		unsigned long low, start_pfn;
 
-		start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
+		start_pfn = pgdat->bdata->node_min_pfn;
 		low = pgdat->bdata->node_low_pfn;
 
 		if (max_zone_pfns[ZONE_NORMAL] < low)
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 1663199ce88..095d93bec7c 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -14,7 +14,6 @@
 #include <linux/pfn.h>
 #include <asm/sections.h>
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL_GPL(node_data);
 
@@ -35,7 +34,7 @@ void __init setup_memory(void)
 	NODE_DATA(0) = pfn_to_kaddr(free_pfn);
 	memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
 	free_pfn += PFN_UP(sizeof(struct pglist_data));
-	NODE_DATA(0)->bdata = &plat_node_bdata[0];
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
 
 	/* Set up node 0 */
 	setup_bootmem_allocator(free_pfn);
@@ -66,7 +65,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	free_pfn += PFN_UP(sizeof(struct pglist_data));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 8c7a9ca7987..38870e0fc18 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage);
 /*
  * For SH-4, we have our own implementation for ptep_get_and_clear
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index 7f885b7f8af..eaf25147194 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg
  * For SH7705, we have our own implementation for ptep_get_and_clear
  * Copied from pg-sh4.c
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 0b0ec6e0475..cef727669c8 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr)
 	} while (pmbe);
 }
 
-static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb)
+static void pmb_cache_ctor(void *pmb)
 {
 	struct pmb_entry *pmbe = pmb;
 
@@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = {
 	.open		= pmb_debugfs_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
 static int __init pmb_debugfs_init(void)
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index f34274a1ded..dae131243bc 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -15,9 +15,7 @@
 #include <asm/mmu_context.h>
 
 /**
- * sh64_tlb_init
- *
- * Perform initial setup for the DTLB and ITLB.
+ * sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
  */
 int __init sh64_tlb_init(void)
 {
@@ -46,9 +44,7 @@ int __init sh64_tlb_init(void)
 }
 
 /**
- * sh64_next_free_dtlb_entry
- *
- * Find the next available DTLB entry
+ * sh64_next_free_dtlb_entry - Find the next available DTLB entry
  */
 unsigned long long sh64_next_free_dtlb_entry(void)
 {
@@ -56,9 +52,7 @@ unsigned long long sh64_next_free_dtlb_entry(void)
 }
 
 /**
- * sh64_get_wired_dtlb_entry
- *
- * Allocate a wired (locked-in) entry in the DTLB
+ * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB
  */
 unsigned long long sh64_get_wired_dtlb_entry(void)
 {
@@ -71,12 +65,10 @@ unsigned long long sh64_get_wired_dtlb_entry(void)
 }
 
 /**
- * sh64_put_wired_dtlb_entry
+ * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB.
  *
  * @entry:	Address of TLB slot.
  *
- * Free a wired (locked-in) entry in the DTLB.
- *
  * Works like a stack, last one to allocate must be first one to free.
  */
 int sh64_put_wired_dtlb_entry(unsigned long long entry)
@@ -115,7 +107,7 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry)
 }
 
 /**
- * sh64_setup_tlb_slot
+ * sh64_setup_tlb_slot - Load up a translation in a wired slot.
  *
  * @config_addr:	Address of TLB slot.
  * @eaddr:		Virtual address.
@@ -154,7 +146,7 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr,
 }
 
 /**
- * sh64_teardown_tlb_slot
+ * sh64_teardown_tlb_slot - Teardown a translation.
  *
  * @config_addr:	Address of TLB slot.
  *
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 1bba7d36be9..0a11cc08f0a 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -46,3 +46,7 @@ R2D_1			RTS7751R2D_1
 CAYMAN			SH_CAYMAN
 SDK7780			SH_SDK7780
 MIGOR			SH_MIGOR
+RSK7203			SH_RSK7203
+AP325RXA		SH_AP325RXA
+SH7763RDP		SH_SH7763RDP
+SH7785LCR		SH_SH7785LCR
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 789724e61e8..a214002114e 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -68,6 +68,7 @@ config SPARC
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP
+	select HAVE_ARCH_TRACEHOOK
 
 # Identify this as a Sparc32 build
 config SPARC32
@@ -298,20 +299,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index fef28e267a5..9592889a6fd 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -18,6 +18,7 @@ CHECKFLAGS	+= -D__sparc__
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
 KBUILD_AFLAGS += -m32
+CPPFLAGS_vmlinux.lds += -m32
 
 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000
 #  Since 2.5.40, the first stage is left not btfix-ed.
@@ -51,20 +52,24 @@ endif
 export INIT_Y CORE_Y DRIVERS_Y NET_Y LIBS_Y HEAD_Y kallsyms.o
 
 # Default target
-all: image
+all: zImage
 
 boot := arch/sparc/boot
 
-image tftpboot.img: vmlinux
+image zImage tftpboot.img: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
+# This is the image used for packaging
+KBUILD_IMAGE := $(boot)/zImage
+
 CLEAN_FILES += arch/$(ARCH)/boot/System.map
 
 # Don't use tabs in echo arguments.
 define archhelp
   echo  '* image        - kernel image ($(boot)/image)'
+  echo  '* zImage       - stripped kernel image ($(boot)/zImage)'
   echo  '  tftpboot.img - image prepared for tftp'
 endef
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 22d331e1e94..3e77a9f5224 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -19,6 +19,9 @@ quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
       cmd_sysmap        = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 quiet_cmd_image = LD      $@
       cmd_image = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) -o $@
+quiet_cmd_strip = STRIP   $@
+      cmd_strip = $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $(obj)/image -o $@
+
 
 define rule_image
 	$(if $($(quiet)cmd_image),               \
@@ -49,6 +52,9 @@ LDFLAGS_image := -T arch/sparc/kernel/vmlinux.lds $(BTOBJS) \
 $(obj)/image: $(obj)/btfix.o FORCE
 	$(call if_changed_rule,image)
 
+$(obj)/zImage: $(obj)/image
+	$(call if_changed,strip)
+
 $(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
new file mode 100644
index 00000000000..a5f0ce734ff
--- /dev/null
+++ b/arch/sparc/include/asm/Kbuild
@@ -0,0 +1,45 @@
+# User exported sparc header files
+include include/asm-generic/Kbuild.asm
+
+header-y += ipcbuf_32.h
+header-y += ipcbuf_64.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
+header-y += ptrace_32.h
+header-y += ptrace_64.h
+header-y += sigcontext_32.h
+header-y += sigcontext_64.h
+header-y += siginfo_32.h
+header-y += siginfo_64.h
+header-y += signal_32.h
+header-y += signal_64.h
+header-y += stat_32.h
+header-y += stat_64.h
+header-y += statfs_32.h
+header-y += statfs_64.h
+header-y += unistd_32.h
+header-y += unistd_64.h
+
+header-y += apc.h
+header-y += asi.h
+header-y += bpp.h
+header-y += display7seg.h
+header-y += envctrl.h
+header-y += fbio.h
+header-y += jsflash.h
+header-y += openprom.h
+header-y += openprom_32.h
+header-y += openprom_64.h
+header-y += openpromio.h
+header-y += perfctr.h
+header-y += psrcompat.h
+header-y += psr.h
+header-y += pstate.h
+header-y += reg.h
+header-y += reg_32.h
+header-y += reg_64.h
+header-y += traps.h
+header-y += uctx.h
+header-y += utrap.h
+header-y += vfc_ioctls.h
+header-y += watchdog.h
diff --git a/arch/sparc/include/asm/agp.h b/arch/sparc/include/asm/agp.h
new file mode 100644
index 00000000000..c2456870b05
--- /dev/null
+++ b/arch/sparc/include/asm/agp.h
@@ -0,0 +1,20 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+/* dummy for now */
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif
diff --git a/arch/sparc/include/asm/apb.h b/arch/sparc/include/asm/apb.h
new file mode 100644
index 00000000000..8f3b57db810
--- /dev/null
+++ b/arch/sparc/include/asm/apb.h
@@ -0,0 +1,36 @@
+/*
+ * apb.h: Advanced PCI Bridge Configuration Registers and Bits
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC64_APB_H
+#define _SPARC64_APB_H
+
+#define APB_TICK_REGISTER			0xb0
+#define APB_INT_ACK				0xb8
+#define APB_PRIMARY_MASTER_RETRY_LIMIT		0xc0
+#define APB_DMA_ASFR				0xc8
+#define APB_DMA_AFAR				0xd0
+#define APB_PIO_TARGET_RETRY_LIMIT		0xd8
+#define APB_PIO_TARGET_LATENCY_TIMER		0xd9
+#define APB_DMA_TARGET_RETRY_LIMIT		0xda
+#define APB_DMA_TARGET_LATENCY_TIMER		0xdb
+#define APB_SECONDARY_MASTER_RETRY_LIMIT	0xdc
+#define APB_SECONDARY_CONTROL			0xdd
+#define APB_IO_ADDRESS_MAP			0xde
+#define APB_MEM_ADDRESS_MAP			0xdf
+
+#define APB_PCI_CONTROL_LOW			0xe0
+#  define APB_PCI_CTL_LOW_ARB_PARK			(1 << 21)
+#  define APB_PCI_CTL_LOW_ERRINT_EN			(1 << 8)
+
+#define APB_PCI_CONTROL_HIGH			0xe4
+#  define APB_PCI_CTL_HIGH_SERR				(1 << 2)
+#  define APB_PCI_CTL_HIGH_ARBITER_EN			(1 << 0)
+
+#define APB_PIO_ASFR				0xe8
+#define APB_PIO_AFAR				0xf0
+#define APB_DIAG_REGISTER			0xf8
+
+#endif /* !(_SPARC64_APB_H) */
diff --git a/arch/sparc/include/asm/apc.h b/arch/sparc/include/asm/apc.h
new file mode 100644
index 00000000000..24e9a7d4d97
--- /dev/null
+++ b/arch/sparc/include/asm/apc.h
@@ -0,0 +1,64 @@
+/* apc - Driver definitions for power management functions
+ * of Aurora Personality Chip (APC) on SPARCstation-4/5 and 
+ * derivatives
+ *
+ * Copyright (c) 2001 Eric Brower (ebrower@usa.net)
+ *
+ */
+
+#ifndef _SPARC_APC_H
+#define _SPARC_APC_H
+
+#include <linux/ioctl.h>
+
+#define APC_IOC	'A'
+
+#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int)	/* Get fan speed	*/
+#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int)	/* Set fan speed	*/
+
+#define APCIOCGCPWR   _IOR(APC_IOC, 0x02, int)	/* Get CPOWER state	*/
+#define APCIOCSCPWR   _IOW(APC_IOC, 0x03, int)	/* Set CPOWER state	*/
+
+#define APCIOCGBPORT   _IOR(APC_IOC, 0x04, int)	/* Get BPORT state 	*/
+#define APCIOCSBPORT   _IOW(APC_IOC, 0x05, int)	/* Set BPORT state	*/
+
+/*
+ * Register offsets
+ */
+#define APC_IDLE_REG	0x00
+#define APC_FANCTL_REG	0x20
+#define APC_CPOWER_REG	0x24
+#define APC_BPORT_REG	0x30
+
+#define APC_REGMASK		0x01
+#define APC_BPMASK		0x03
+
+/*
+ * IDLE - CPU standby values (set to initiate standby)
+ */
+#define APC_IDLE_ON		0x01
+
+/*
+ * FANCTL - Fan speed control state values
+ */
+#define APC_FANCTL_HI	0x00	/* Fan speed high	*/
+#define APC_FANCTL_LO	0x01	/* Fan speed low	*/
+
+/*
+ * CPWR - Convenience power outlet state values 
+ */
+#define APC_CPOWER_ON	0x00	/* Conv power on	*/
+#define APC_CPOWER_OFF	0x01	/* Conv power off	*/
+
+/*
+ * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on)
+ *
+ * WARNING: Internal usage of bit ports is platform dependent--
+ * don't modify BPORT settings unless you know what you are doing.
+ * 
+ * On SS5 BPA seems to toggle onboard ethernet loopback... -E
+ */
+#define APC_BPORT_A		0x01	/* Bit Port A		*/
+#define APC_BPORT_B		0x02	/* Bit Port B		*/
+
+#endif /* !(_SPARC_APC_H) */
diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
new file mode 100644
index 00000000000..74703c5ef98
--- /dev/null
+++ b/arch/sparc/include/asm/asi.h
@@ -0,0 +1,262 @@
+#ifndef _SPARC_ASI_H
+#define _SPARC_ASI_H
+
+/* asi.h:  Address Space Identifier values for the sparc.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au)
+ * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su>
+ */
+
+/* The first batch are for the sun4c. */
+
+#define ASI_NULL1           0x00
+#define ASI_NULL2           0x01
+
+/* sun4c and sun4 control registers and mmu/vac ops */
+#define ASI_CONTROL         0x02
+#define ASI_SEGMAP          0x03
+#define ASI_PTE             0x04
+#define ASI_HWFLUSHSEG      0x05
+#define ASI_HWFLUSHPAGE     0x06
+#define ASI_REGMAP          0x06
+#define ASI_HWFLUSHCONTEXT  0x07
+
+#define ASI_USERTXT         0x08
+#define ASI_KERNELTXT       0x09
+#define ASI_USERDATA        0x0a
+#define ASI_KERNELDATA      0x0b
+
+/* VAC Cache flushing on sun4c and sun4 */
+#define ASI_FLUSHSEG        0x0c
+#define ASI_FLUSHPG         0x0d
+#define ASI_FLUSHCTX        0x0e
+
+/* SPARCstation-5: only 6 bits are decoded. */
+/* wo = Write Only, rw = Read Write;        */
+/* ss = Single Size, as = All Sizes;        */
+#define ASI_M_RES00         0x00   /* Don't touch... */
+#define ASI_M_UNA01         0x01   /* Same here... */
+#define ASI_M_MXCC          0x02   /* Access to TI VIKING MXCC registers */
+#define ASI_M_FLUSH_PROBE   0x03   /* Reference MMU Flush/Probe; rw, ss */
+#define ASI_M_MMUREGS       0x04   /* MMU Registers; rw, ss */
+#define ASI_M_TLBDIAG       0x05   /* MMU TLB only Diagnostics */
+#define ASI_M_DIAGS         0x06   /* Reference MMU Diagnostics */
+#define ASI_M_IODIAG        0x07   /* MMU I/O TLB only Diagnostics */
+#define ASI_M_USERTXT       0x08   /* Same as ASI_USERTXT; rw, as */
+#define ASI_M_KERNELTXT     0x09   /* Same as ASI_KERNELTXT; rw, as */
+#define ASI_M_USERDATA      0x0A   /* Same as ASI_USERDATA; rw, as */
+#define ASI_M_KERNELDATA    0x0B   /* Same as ASI_KERNELDATA; rw, as */
+#define ASI_M_TXTC_TAG      0x0C   /* Instruction Cache Tag; rw, ss */
+#define ASI_M_TXTC_DATA     0x0D   /* Instruction Cache Data; rw, ss */
+#define ASI_M_DATAC_TAG     0x0E   /* Data Cache Tag; rw, ss */
+#define ASI_M_DATAC_DATA    0x0F   /* Data Cache Data; rw, ss */
+
+/* The following cache flushing ASIs work only with the 'sta'
+ * instruction. Results are unpredictable for 'swap' and 'ldstuba',
+ * so don't do it.
+ */
+
+/* These ASI flushes affect external caches too. */
+#define ASI_M_FLUSH_PAGE    0x10   /* Flush I&D Cache Line (page); wo, ss */
+#define ASI_M_FLUSH_SEG     0x11   /* Flush I&D Cache Line (seg); wo, ss */
+#define ASI_M_FLUSH_REGION  0x12   /* Flush I&D Cache Line (region); wo, ss */
+#define ASI_M_FLUSH_CTX     0x13   /* Flush I&D Cache Line (context); wo, ss */
+#define ASI_M_FLUSH_USER    0x14   /* Flush I&D Cache Line (user); wo, ss */
+
+/* Block-copy operations are available only on certain V8 cpus. */
+#define ASI_M_BCOPY         0x17   /* Block copy */
+
+/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */
+#define ASI_M_IFLUSH_PAGE   0x18   /* Flush I Cache Line (page); wo, ss */
+#define ASI_M_IFLUSH_SEG    0x19   /* Flush I Cache Line (seg); wo, ss */
+#define ASI_M_IFLUSH_REGION 0x1A   /* Flush I Cache Line (region); wo, ss */
+#define ASI_M_IFLUSH_CTX    0x1B   /* Flush I Cache Line (context); wo, ss */
+#define ASI_M_IFLUSH_USER   0x1C   /* Flush I Cache Line (user); wo, ss */
+
+/* Block-fill operations are available on certain V8 cpus */
+#define ASI_M_BFILL         0x1F
+
+/* This allows direct access to main memory, actually 0x20 to 0x2f are
+ * the available ASI's for physical ram pass-through, but I don't have
+ * any idea what the other ones do....
+ */
+
+#define ASI_M_BYPASS       0x20   /* Reference MMU bypass; rw, as */
+#define ASI_M_FBMEM        0x29   /* Graphics card frame buffer access */
+#define ASI_M_VMEUS        0x2A   /* VME user 16-bit access */
+#define ASI_M_VMEPS        0x2B   /* VME priv 16-bit access */
+#define ASI_M_VMEUT        0x2C   /* VME user 32-bit access */
+#define ASI_M_VMEPT        0x2D   /* VME priv 32-bit access */
+#define ASI_M_SBUS         0x2E   /* Direct SBus access */
+#define ASI_M_CTL          0x2F   /* Control Space (ECC and MXCC are here) */
+
+
+/* This is ROSS HyperSparc only. */
+#define ASI_M_FLUSH_IWHOLE 0x31   /* Flush entire ICACHE; wo, ss */
+
+/* Tsunami/Viking/TurboSparc i/d cache flash clear. */
+#define ASI_M_IC_FLCLEAR   0x36
+#define ASI_M_DC_FLCLEAR   0x37
+
+#define ASI_M_DCDR         0x39   /* Data Cache Diagnostics Register rw, ss */
+
+#define ASI_M_VIKING_TMP1  0x40	  /* Emulation temporary 1 on Viking */
+/* only available on SuperSparc I */
+/* #define ASI_M_VIKING_TMP2  0x41 */  /* Emulation temporary 2 on Viking */
+
+#define ASI_M_ACTION       0x4c   /* Breakpoint Action Register (GNU/Viking) */
+
+/* V9 Architecture mandary ASIs. */
+#define ASI_N			0x04 /* Nucleus				*/
+#define ASI_NL			0x0c /* Nucleus, little endian		*/
+#define ASI_AIUP		0x10 /* Primary, user			*/
+#define ASI_AIUS		0x11 /* Secondary, user			*/
+#define ASI_AIUPL		0x18 /* Primary, user, little endian	*/
+#define ASI_AIUSL		0x19 /* Secondary, user, little endian	*/
+#define ASI_P			0x80 /* Primary, implicit		*/
+#define ASI_S			0x81 /* Secondary, implicit		*/
+#define ASI_PNF			0x82 /* Primary, no fault		*/
+#define ASI_SNF			0x83 /* Secondary, no fault		*/
+#define ASI_PL			0x88 /* Primary, implicit, l-endian	*/
+#define ASI_SL			0x89 /* Secondary, implicit, l-endian	*/
+#define ASI_PNFL		0x8a /* Primary, no fault, l-endian	*/
+#define ASI_SNFL		0x8b /* Secondary, no fault, l-endian	*/
+
+/* SpitFire and later extended ASIs.  The "(III)" marker designates
+ * UltraSparc-III and later specific ASIs.  The "(CMT)" marker designates
+ * Chip Multi Threading specific ASIs.  "(NG)" designates Niagara specific
+ * ASIs, "(4V)" designates SUN4V specific ASIs.
+ */
+#define ASI_PHYS_USE_EC		0x14 /* PADDR, E-cachable		*/
+#define ASI_PHYS_BYPASS_EC_E	0x15 /* PADDR, E-bit			*/
+#define ASI_BLK_AIUP_4V		0x16 /* (4V) Prim, user, block ld/st	*/
+#define ASI_BLK_AIUS_4V		0x17 /* (4V) Sec, user, block ld/st	*/
+#define ASI_PHYS_USE_EC_L	0x1c /* PADDR, E-cachable, little endian*/
+#define ASI_PHYS_BYPASS_EC_E_L	0x1d /* PADDR, E-bit, little endian	*/
+#define ASI_BLK_AIUP_L_4V	0x1e /* (4V) Prim, user, block, l-endian*/
+#define ASI_BLK_AIUS_L_4V	0x1f /* (4V) Sec, user, block, l-endian	*/
+#define ASI_SCRATCHPAD		0x20 /* (4V) Scratch Pad Registers	*/
+#define ASI_MMU			0x21 /* (4V) MMU Context Registers	*/
+#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 /* (NG) init-store, twin load,
+					 * secondary, user
+					 */
+#define ASI_NUCLEUS_QUAD_LDD	0x24 /* Cachable, qword load		*/
+#define ASI_QUEUE		0x25 /* (4V) Interrupt Queue Registers	*/
+#define ASI_QUAD_LDD_PHYS_4V	0x26 /* (4V) Physical, qword load	*/
+#define ASI_NUCLEUS_QUAD_LDD_L	0x2c /* Cachable, qword load, l-endian 	*/
+#define ASI_QUAD_LDD_PHYS_L_4V	0x2e /* (4V) Phys, qword load, l-endian	*/
+#define ASI_PCACHE_DATA_STATUS	0x30 /* (III) PCache data stat RAM diag	*/
+#define ASI_PCACHE_DATA		0x31 /* (III) PCache data RAM diag	*/
+#define ASI_PCACHE_TAG		0x32 /* (III) PCache tag RAM diag	*/
+#define ASI_PCACHE_SNOOP_TAG	0x33 /* (III) PCache snoop tag RAM diag	*/
+#define ASI_QUAD_LDD_PHYS	0x34 /* (III+) PADDR, qword load	*/
+#define ASI_WCACHE_VALID_BITS	0x38 /* (III) WCache Valid Bits diag	*/
+#define ASI_WCACHE_DATA		0x39 /* (III) WCache data RAM diag	*/
+#define ASI_WCACHE_TAG		0x3a /* (III) WCache tag RAM diag	*/
+#define ASI_WCACHE_SNOOP_TAG	0x3b /* (III) WCache snoop tag RAM diag	*/
+#define ASI_QUAD_LDD_PHYS_L	0x3c /* (III+) PADDR, qw-load, l-endian	*/
+#define ASI_SRAM_FAST_INIT	0x40 /* (III+) Fast SRAM init		*/
+#define ASI_CORE_AVAILABLE	0x41 /* (CMT) LP Available		*/
+#define ASI_CORE_ENABLE_STAT	0x41 /* (CMT) LP Enable Status		*/
+#define ASI_CORE_ENABLE		0x41 /* (CMT) LP Enable RW		*/
+#define ASI_XIR_STEERING	0x41 /* (CMT) XIR Steering RW		*/
+#define ASI_CORE_RUNNING_RW	0x41 /* (CMT) LP Running RW		*/
+#define ASI_CORE_RUNNING_W1S	0x41 /* (CMT) LP Running Write-One Set	*/
+#define ASI_CORE_RUNNING_W1C	0x41 /* (CMT) LP Running Write-One Clr	*/
+#define ASI_CORE_RUNNING_STAT	0x41 /* (CMT) LP Running Status		*/
+#define ASI_CMT_ERROR_STEERING	0x41 /* (CMT) Error Steering RW		*/
+#define ASI_DCACHE_INVALIDATE	0x42 /* (III) DCache Invalidate diag	*/
+#define ASI_DCACHE_UTAG		0x43 /* (III) DCache uTag diag		*/
+#define ASI_DCACHE_SNOOP_TAG	0x44 /* (III) DCache snoop tag RAM diag	*/
+#define ASI_LSU_CONTROL		0x45 /* Load-store control unit		*/
+#define ASI_DCU_CONTROL_REG	0x45 /* (III) DCache Unit Control reg	*/
+#define ASI_DCACHE_DATA		0x46 /* DCache data-ram diag access	*/
+#define ASI_DCACHE_TAG		0x47 /* Dcache tag/valid ram diag access*/
+#define ASI_INTR_DISPATCH_STAT	0x48 /* IRQ vector dispatch status	*/
+#define ASI_INTR_RECEIVE	0x49 /* IRQ vector receive status	*/
+#define ASI_UPA_CONFIG		0x4a /* UPA config space		*/
+#define ASI_JBUS_CONFIG		0x4a /* (IIIi) JBUS Config Register	*/
+#define ASI_SAFARI_CONFIG	0x4a /* (III) Safari Config Register	*/
+#define ASI_SAFARI_ADDRESS	0x4a /* (III) Safari Address Register	*/
+#define ASI_ESTATE_ERROR_EN	0x4b /* E-cache error enable space	*/
+#define ASI_AFSR		0x4c /* Async fault status register	*/
+#define ASI_AFAR		0x4d /* Async fault address register	*/
+#define ASI_EC_TAG_DATA		0x4e /* E-cache tag/valid ram diag acc	*/
+#define ASI_IMMU		0x50 /* Insn-MMU main register space	*/
+#define ASI_IMMU_TSB_8KB_PTR	0x51 /* Insn-MMU 8KB TSB pointer reg	*/
+#define ASI_IMMU_TSB_64KB_PTR	0x52 /* Insn-MMU 64KB TSB pointer reg	*/
+#define ASI_ITLB_DATA_IN	0x54 /* Insn-MMU TLB data in reg	*/
+#define ASI_ITLB_DATA_ACCESS	0x55 /* Insn-MMU TLB data access reg	*/
+#define ASI_ITLB_TAG_READ	0x56 /* Insn-MMU TLB tag read reg	*/
+#define ASI_IMMU_DEMAP		0x57 /* Insn-MMU TLB demap		*/
+#define ASI_DMMU		0x58 /* Data-MMU main register space	*/
+#define ASI_DMMU_TSB_8KB_PTR	0x59 /* Data-MMU 8KB TSB pointer reg	*/
+#define ASI_DMMU_TSB_64KB_PTR	0x5a /* Data-MMU 16KB TSB pointer reg	*/
+#define ASI_DMMU_TSB_DIRECT_PTR	0x5b /* Data-MMU TSB direct pointer reg	*/
+#define ASI_DTLB_DATA_IN	0x5c /* Data-MMU TLB data in reg	*/
+#define ASI_DTLB_DATA_ACCESS	0x5d /* Data-MMU TLB data access reg	*/
+#define ASI_DTLB_TAG_READ	0x5e /* Data-MMU TLB tag read reg	*/
+#define ASI_DMMU_DEMAP		0x5f /* Data-MMU TLB demap		*/
+#define ASI_IIU_INST_TRAP	0x60 /* (III) Instruction Breakpoint	*/
+#define ASI_INTR_ID		0x63 /* (CMT) Interrupt ID register	*/
+#define ASI_CORE_ID		0x63 /* (CMT) LP ID register		*/
+#define ASI_CESR_ID		0x63 /* (CMT) CESR ID register		*/
+#define ASI_IC_INSTR		0x66 /* Insn cache instrucion ram diag	*/
+#define ASI_IC_TAG		0x67 /* Insn cache tag/valid ram diag 	*/
+#define ASI_IC_STAG		0x68 /* (III) Insn cache snoop tag ram	*/
+#define ASI_IC_PRE_DECODE	0x6e /* Insn cache pre-decode ram diag	*/
+#define ASI_IC_NEXT_FIELD	0x6f /* Insn cache next-field ram diag	*/
+#define ASI_BRPRED_ARRAY	0x6f /* (III) Branch Prediction RAM diag*/
+#define ASI_BLK_AIUP		0x70 /* Primary, user, block load/store	*/
+#define ASI_BLK_AIUS		0x71 /* Secondary, user, block ld/st	*/
+#define ASI_MCU_CTRL_REG	0x72 /* (III) Memory controller regs	*/
+#define ASI_EC_DATA		0x74 /* (III) E-cache data staging reg	*/
+#define ASI_EC_CTRL		0x75 /* (III) E-cache control reg	*/
+#define ASI_EC_W		0x76 /* E-cache diag write access	*/
+#define ASI_UDB_ERROR_W		0x77 /* External UDB error regs W	*/
+#define ASI_UDB_CONTROL_W	0x77 /* External UDB control regs W	*/
+#define ASI_INTR_W		0x77 /* IRQ vector dispatch write	*/
+#define ASI_INTR_DATAN_W	0x77 /* (III) Out irq vector data reg N	*/
+#define ASI_INTR_DISPATCH_W	0x77 /* (III) Interrupt vector dispatch	*/
+#define ASI_BLK_AIUPL		0x78 /* Primary, user, little, blk ld/st*/
+#define ASI_BLK_AIUSL		0x79 /* Secondary, user, little, blk ld/st*/
+#define ASI_EC_R		0x7e /* E-cache diag read access	*/
+#define ASI_UDBH_ERROR_R	0x7f /* External UDB error regs rd hi	*/
+#define ASI_UDBL_ERROR_R	0x7f /* External UDB error regs rd low	*/
+#define ASI_UDBH_CONTROL_R	0x7f /* External UDB control regs rd hi	*/
+#define ASI_UDBL_CONTROL_R	0x7f /* External UDB control regs rd low*/
+#define ASI_INTR_R		0x7f /* IRQ vector dispatch read	*/
+#define ASI_INTR_DATAN_R	0x7f /* (III) In irq vector data reg N	*/
+#define ASI_PST8_P		0xc0 /* Primary, 8 8-bit, partial	*/
+#define ASI_PST8_S		0xc1 /* Secondary, 8 8-bit, partial	*/
+#define ASI_PST16_P		0xc2 /* Primary, 4 16-bit, partial	*/
+#define ASI_PST16_S		0xc3 /* Secondary, 4 16-bit, partial	*/
+#define ASI_PST32_P		0xc4 /* Primary, 2 32-bit, partial	*/
+#define ASI_PST32_S		0xc5 /* Secondary, 2 32-bit, partial	*/
+#define ASI_PST8_PL		0xc8 /* Primary, 8 8-bit, partial, L	*/
+#define ASI_PST8_SL		0xc9 /* Secondary, 8 8-bit, partial, L	*/
+#define ASI_PST16_PL		0xca /* Primary, 4 16-bit, partial, L	*/
+#define ASI_PST16_SL		0xcb /* Secondary, 4 16-bit, partial, L	*/
+#define ASI_PST32_PL		0xcc /* Primary, 2 32-bit, partial, L	*/
+#define ASI_PST32_SL		0xcd /* Secondary, 2 32-bit, partial, L	*/
+#define ASI_FL8_P		0xd0 /* Primary, 1 8-bit, fpu ld/st	*/
+#define ASI_FL8_S		0xd1 /* Secondary, 1 8-bit, fpu ld/st	*/
+#define ASI_FL16_P		0xd2 /* Primary, 1 16-bit, fpu ld/st	*/
+#define ASI_FL16_S		0xd3 /* Secondary, 1 16-bit, fpu ld/st	*/
+#define ASI_FL8_PL		0xd8 /* Primary, 1 8-bit, fpu ld/st, L	*/
+#define ASI_FL8_SL		0xd9 /* Secondary, 1 8-bit, fpu ld/st, L*/
+#define ASI_FL16_PL		0xda /* Primary, 1 16-bit, fpu ld/st, L	*/
+#define ASI_FL16_SL		0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/
+#define ASI_BLK_COMMIT_P	0xe0 /* Primary, blk store commit	*/
+#define ASI_BLK_COMMIT_S	0xe1 /* Secondary, blk store commit	*/
+#define ASI_BLK_INIT_QUAD_LDD_P	0xe2 /* (NG) init-store, twin load,
+				      * primary, implicit
+				      */
+#define ASI_BLK_P		0xf0 /* Primary, blk ld/st		*/
+#define ASI_BLK_S		0xf1 /* Secondary, blk ld/st		*/
+#define ASI_BLK_PL		0xf8 /* Primary, blk ld/st, little	*/
+#define ASI_BLK_SL		0xf9 /* Secondary, blk ld/st, little	*/
+
+#endif /* _SPARC_ASI_H */
diff --git a/arch/sparc/include/asm/asmmacro.h b/arch/sparc/include/asm/asmmacro.h
new file mode 100644
index 00000000000..a619a4d97aa
--- /dev/null
+++ b/arch/sparc/include/asm/asmmacro.h
@@ -0,0 +1,45 @@
+/* asmmacro.h: Assembler macros.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
+ */
+
+#ifndef _SPARC_ASMMACRO_H
+#define _SPARC_ASMMACRO_H
+
+#include <asm/btfixup.h>
+#include <asm/asi.h>
+
+#define GET_PROCESSOR4M_ID(reg) \
+	rd	%tbr, %reg; \
+	srl	%reg, 12, %reg; \
+	and	%reg, 3, %reg;
+
+#define GET_PROCESSOR4D_ID(reg) \
+	lda	[%g0] ASI_M_VIKING_TMP1, %reg;
+
+/* All trap entry points _must_ begin with this macro or else you
+ * lose.  It makes sure the kernel has a proper window so that
+ * c-code can be called.
+ */
+#define SAVE_ALL_HEAD \
+	sethi	%hi(trap_setup), %l4; \
+	jmpl	%l4 + %lo(trap_setup), %l6;
+#define SAVE_ALL \
+	SAVE_ALL_HEAD \
+	 nop;
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
+   likes byte accesses. These are to avoid ifdef mania. */
+
+#ifdef CONFIG_SUN4
+#define lduXa	lduha
+#define stXa	stha
+#else
+#define lduXa	lduba
+#define stXa	stba
+#endif
+
+#endif /* !(_SPARC_ASMMACRO_H) */
diff --git a/arch/sparc/include/asm/atomic.h b/arch/sparc/include/asm/atomic.h
new file mode 100644
index 00000000000..8ff83d8cc33
--- /dev/null
+++ b/arch/sparc/include/asm/atomic.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ATOMIC_H
+#define ___ASM_SPARC_ATOMIC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/atomic_64.h>
+#else
+#include <asm/atomic_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
new file mode 100644
index 00000000000..5c944b5a804
--- /dev/null
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -0,0 +1,165 @@
+/* atomic.h: These still suck, but the I-cache hit rate is higher.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au)
+ * Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org)
+ *
+ * Additions by Keith M Wesolowski (wesolows@foobazco.org) based
+ * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>.
+ */
+
+#ifndef __ARCH_SPARC_ATOMIC__
+#define __ARCH_SPARC_ATOMIC__
+
+#include <linux/types.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#ifdef __KERNEL__
+
+#define ATOMIC_INIT(i)  { (i) }
+
+extern int __atomic_add_return(int, atomic_t *);
+extern int atomic_cmpxchg(atomic_t *, int, int);
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+extern int atomic_add_unless(atomic_t *, int, int);
+extern void atomic_set(atomic_t *, int);
+
+#define atomic_read(v)          ((v)->counter)
+
+#define atomic_add(i, v)	((void)__atomic_add_return( (int)(i), (v)))
+#define atomic_sub(i, v)	((void)__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc(v)		((void)__atomic_add_return(        1, (v)))
+#define atomic_dec(v)		((void)__atomic_add_return(       -1, (v)))
+
+#define atomic_add_return(i, v)	(__atomic_add_return( (int)(i), (v)))
+#define atomic_sub_return(i, v)	(__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc_return(v)	(__atomic_add_return(        1, (v)))
+#define atomic_dec_return(v)	(__atomic_add_return(       -1, (v)))
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* This is the old 24-bit implementation.  It's still used internally
+ * by some sparc-specific code, notably the semaphore implementation.
+ */
+typedef struct { volatile int counter; } atomic24_t;
+
+#ifndef CONFIG_SMP
+
+#define ATOMIC24_INIT(i)  { (i) }
+#define atomic24_read(v)          ((v)->counter)
+#define atomic24_set(v, i)        (((v)->counter) = i)
+
+#else
+/* We do the bulk of the actual work out of line in two common
+ * routines in assembler, see arch/sparc/lib/atomic.S for the
+ * "fun" details.
+ *
+ * For SMP the trick is you embed the spin lock byte within
+ * the word, use the low byte so signedness is easily retained
+ * via a quick arithmetic shift.  It looks like this:
+ *
+ *	----------------------------------------
+ *	| signed 24-bit counter value |  lock  |  atomic_t
+ *	----------------------------------------
+ *	 31                          8 7      0
+ */
+
+#define ATOMIC24_INIT(i)	{ ((i) << 8) }
+
+static inline int atomic24_read(const atomic24_t *v)
+{
+	int ret = v->counter;
+
+	while(ret & 0xff)
+		ret = v->counter;
+
+	return ret >> 8;
+}
+
+#define atomic24_set(v, i)	(((v)->counter) = ((i) << 8))
+#endif
+
+static inline int __atomic24_add(int i, atomic24_t *v)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g7");
+
+	ptr = &v->counter;
+	increment = i;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_add\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+	: "0" (increment), "r" (ptr)
+	: "memory", "cc");
+
+	return increment;
+}
+
+static inline int __atomic24_sub(int i, atomic24_t *v)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g7");
+
+	ptr = &v->counter;
+	increment = i;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_sub\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+	: "0" (increment), "r" (ptr)
+	: "memory", "cc");
+
+	return increment;
+}
+
+#define atomic24_add(i, v) ((void)__atomic24_add((i), (v)))
+#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v)))
+
+#define atomic24_dec_return(v) __atomic24_sub(1, (v))
+#define atomic24_inc_return(v) __atomic24_add(1, (v))
+
+#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0)
+#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0)
+
+#define atomic24_inc(v) ((void)__atomic24_add(1, (v)))
+#define atomic24_dec(v) ((void)__atomic24_sub(1, (v)))
+
+#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* !(__KERNEL__) */
+
+#include <asm-generic/atomic.h>
+#endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
new file mode 100644
index 00000000000..2c71ec4a3b1
--- /dev/null
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -0,0 +1,128 @@
+/* atomic.h: Thankfully the V9 is at least reasonable for this
+ *           stuff.
+ *
+ * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __ARCH_SPARC64_ATOMIC__
+#define __ARCH_SPARC64_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		{ (i) }
+#define ATOMIC64_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic64_read(v)	((v)->counter)
+
+#define atomic_set(v, i)	(((v)->counter) = i)
+#define atomic64_set(v, i)	(((v)->counter) = i)
+
+extern void atomic_add(int, atomic_t *);
+extern void atomic64_add(int, atomic64_t *);
+extern void atomic_sub(int, atomic_t *);
+extern void atomic64_sub(int, atomic64_t *);
+
+extern int atomic_add_ret(int, atomic_t *);
+extern int atomic64_add_ret(int, atomic64_t *);
+extern int atomic_sub_ret(int, atomic_t *);
+extern int atomic64_sub_ret(int, atomic64_t *);
+
+#define atomic_dec_return(v) atomic_sub_ret(1, v)
+#define atomic64_dec_return(v) atomic64_sub_ret(1, v)
+
+#define atomic_inc_return(v) atomic_add_ret(1, v)
+#define atomic64_inc_return(v) atomic64_add_ret(1, v)
+
+#define atomic_sub_return(i, v) atomic_sub_ret(i, v)
+#define atomic64_sub_return(i, v) atomic64_sub_ret(i, v)
+
+#define atomic_add_return(i, v) atomic_add_ret(i, v)
+#define atomic64_add_return(i, v) atomic64_add_ret(i, v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0)
+#define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_sub_ret(1, v) == 0)
+#define atomic64_dec_and_test(v) (atomic64_sub_ret(1, v) == 0)
+
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic64_inc(v) atomic64_add(1, v)
+
+#define atomic_dec(v) atomic_sub(1, v)
+#define atomic64_dec(v) atomic64_sub(1, v)
+
+#define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0)
+#define atomic64_add_negative(i, v) (atomic64_add_ret(i, v) < 0)
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic64_cmpxchg(v, o, n) \
+	((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing */
+#ifdef CONFIG_SMP
+#define smp_mb__before_atomic_dec()	membar_storeload_loadload();
+#define smp_mb__after_atomic_dec()	membar_storeload_storestore();
+#define smp_mb__before_atomic_inc()	membar_storeload_loadload();
+#define smp_mb__after_atomic_inc()	membar_storeload_storestore();
+#else
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+#endif
+
+#include <asm-generic/atomic.h>
+#endif /* !(__ARCH_SPARC64_ATOMIC__) */
diff --git a/arch/sparc/include/asm/auxio.h b/arch/sparc/include/asm/auxio.h
new file mode 100644
index 00000000000..13dc67f0301
--- /dev/null
+++ b/arch/sparc/include/asm/auxio.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_AUXIO_H
+#define ___ASM_SPARC_AUXIO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/auxio_64.h>
+#else
+#include <asm/auxio_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/auxio_32.h b/arch/sparc/include/asm/auxio_32.h
new file mode 100644
index 00000000000..e03e088be95
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_32.h
@@ -0,0 +1,89 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O register.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_AUXIO_H
+#define _SPARC_AUXIO_H
+
+#include <asm/system.h>
+#include <asm/vaddrs.h>
+
+/* This register is an unsigned char in IO space.  It does two things.
+ * First, it is used to control the front panel LED light on machines
+ * that have it (good for testing entry points to trap handlers and irq's)
+ * Secondly, it controls various floppy drive parameters.
+ */
+#define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
+#define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
+#define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
+#define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
+#define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
+#define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
+#define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
+
+/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
+#define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
+
+/* Set the following to zero to eject the floppy. */
+#define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
+#define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * NOTE: these routines are implementation dependent--
+ * understand the hardware you are querying!
+ */
+extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
+extern unsigned char get_auxio(void); /* .../asm/floppy.h */
+
+/*
+ * The following routines are provided for driver-compatibility
+ * with sparc64 (primarily sunlance.c)
+ */
+
+#define AUXIO_LTE_ON    1
+#define AUXIO_LTE_OFF   0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+#define auxio_set_lte(on) \
+do { \
+	if(on) { \
+		set_auxio(AUXIO_LINK_TEST, 0); \
+	} else { \
+		set_auxio(0, AUXIO_LINK_TEST); \
+	} \
+} while (0)
+
+#define AUXIO_LED_ON    1
+#define AUXIO_LED_OFF   0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+#define auxio_set_led(on) \
+do { \
+	if(on) { \
+		set_auxio(AUXIO_LED, 0); \
+	} else { \
+		set_auxio(0, AUXIO_LED); \
+	} \
+} while (0)
+
+#endif /* !(__ASSEMBLY__) */
+
+
+/* AUXIO2 (Power Off Control) */
+extern __volatile__ unsigned char * auxio_power_register;
+
+#define	AUXIO_POWER_DETECT_FAILURE	32
+#define	AUXIO_POWER_CLEAR_FAILURE	2
+#define	AUXIO_POWER_OFF			1
+
+
+#endif /* !(_SPARC_AUXIO_H) */
diff --git a/arch/sparc/include/asm/auxio_64.h b/arch/sparc/include/asm/auxio_64.h
new file mode 100644
index 00000000000..f61cd1e3e39
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_64.h
@@ -0,0 +1,100 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
+ */
+#ifndef _SPARC64_AUXIO_H
+#define _SPARC64_AUXIO_H
+
+/* AUXIO implementations:
+ * sbus-based NCR89C105 "Slavio"
+ *	LED/Floppy (AUX1) register
+ *	Power (AUX2) register
+ *
+ * ebus-based auxio on PCIO
+ *	LED Auxio Register
+ *	Power Auxio Register
+ *
+ * Register definitions from NCR _NCR89C105 Chip Specification_
+ *
+ * SLAVIO AUX1 @ 0x1900000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) |  E  |  M  |  T  |  L  |
+ * -------------------------------------------------
+ * (R) - bit 7:6,4 are reserved and should be masked in s/w
+ *  D  - Floppy Density Sense (1=high density) R/O
+ *  E  - Link Test Enable, directly reflected on AT&T 7213 LTE pin
+ *  M  - Monitor/Mouse Mux, directly reflected on MON_MSE_MUX pin
+ *  T  - Terminal Count: sends TC pulse to 82077 floppy controller
+ *  L  - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_AUX1_MASK		0xc0 /* Mask bits 		*/
+#define AUXIO_AUX1_FDENS	0x20 /* Floppy Density Sense	*/
+#define AUXIO_AUX1_LTE 		0x08 /* Link Test Enable 	*/
+#define AUXIO_AUX1_MMUX		0x04 /* Monitor/Mouse Mux	*/
+#define AUXIO_AUX1_FTCNT	0x02 /* Terminal Count, 	*/
+#define AUXIO_AUX1_LED		0x01 /* System LED		*/
+
+/* SLAVIO AUX2 @ 0x1910000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) | (R) | (R) |  C  |  F  |
+ * -------------------------------------------------
+ * (R) - bits 7:6,4:2 are reserved and should be masked in s/w
+ *  D  - Power Failure Detect (1=power fail)
+ *  C  - Clear Power Failure Detect Int (1=clear)
+ *  F  - Power Off (1=power off)
+ */
+#define AUXIO_AUX2_MASK		0xdc /* Mask Bits		*/
+#define AUXIO_AUX2_PFAILDET	0x20 /* Power Fail Detect	*/
+#define AUXIO_AUX2_PFAILCLR 	0x02 /* Clear Pwr Fail Det Intr	*/
+#define AUXIO_AUX2_PWR_OFF	0x01 /* Power Off		*/
+
+/* Register definitions from Sun Microsystems _PCIO_ p/n 802-7837
+ *
+ * PCIO LED Auxio @ 0x726000
+ * -------------------------------------------------
+ * |             31:1 Unused                 | LED |
+ * -------------------------------------------------
+ * Bits 31:1 unused
+ * LED - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_PCIO_LED		0x01 /* System LED 		*/
+
+/* PCIO Power Auxio @ 0x724000
+ * -------------------------------------------------
+ * |             31:2 Unused           | CPO | SPO |
+ * -------------------------------------------------
+ * Bits 31:2 unused
+ * CPO - Courtesy Power Off (1=off)
+ * SPO - System Power Off   (1=off)
+ */
+#define AUXIO_PCIO_CPWR_OFF	0x02 /* Courtesy Power Off	*/
+#define AUXIO_PCIO_SPWR_OFF	0x01 /* System Power Off	*/
+
+#ifndef __ASSEMBLY__
+
+extern void __iomem *auxio_register;
+
+#define AUXIO_LTE_ON	1
+#define AUXIO_LTE_OFF	0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+extern void auxio_set_lte(int on);
+
+#define AUXIO_LED_ON	1
+#define AUXIO_LED_OFF	0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+extern void auxio_set_led(int on);
+
+#endif /* ifndef __ASSEMBLY__ */
+
+#endif /* !(_SPARC64_AUXIO_H) */
diff --git a/arch/sparc/include/asm/auxvec.h b/arch/sparc/include/asm/auxvec.h
new file mode 100644
index 00000000000..ad6f360261f
--- /dev/null
+++ b/arch/sparc/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMSPARC_AUXVEC_H
+#define __ASMSPARC_AUXVEC_H
+
+#endif /* !(__ASMSPARC_AUXVEC_H) */
diff --git a/arch/sparc/include/asm/backoff.h b/arch/sparc/include/asm/backoff.h
new file mode 100644
index 00000000000..fa1fdf67e35
--- /dev/null
+++ b/arch/sparc/include/asm/backoff.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC64_BACKOFF_H
+#define _SPARC64_BACKOFF_H
+
+#define BACKOFF_LIMIT	(4 * 1024)
+
+#ifdef CONFIG_SMP
+
+#define BACKOFF_SETUP(reg)	\
+	mov	1, reg
+
+#define BACKOFF_SPIN(reg, tmp, label)	\
+	mov	reg, tmp; \
+88:	brnz,pt	tmp, 88b; \
+	 sub	tmp, 1, tmp; \
+	set	BACKOFF_LIMIT, tmp; \
+	cmp	reg, tmp; \
+	bg,pn	%xcc, label; \
+	 nop; \
+	ba,pt	%xcc, label; \
+	 sllx	reg, 1, reg;
+
+#else
+
+#define BACKOFF_SETUP(reg)
+#define BACKOFF_SPIN(reg, tmp, label) \
+	ba,pt	%xcc, label; \
+	 nop;
+
+#endif
+
+#endif /* _SPARC64_BACKOFF_H */
diff --git a/arch/sparc/include/asm/bbc.h b/arch/sparc/include/asm/bbc.h
new file mode 100644
index 00000000000..423a85800aa
--- /dev/null
+++ b/arch/sparc/include/asm/bbc.h
@@ -0,0 +1,225 @@
+/*
+ * bbc.h: Defines for BootBus Controller found on UltraSPARC-III
+ *        systems.
+ *
+ * Copyright (C) 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_BBC_H
+#define _SPARC64_BBC_H
+
+/* Register sizes are indicated by "B" (Byte, 1-byte),
+ * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or
+ * "Q" (Quad, 8 bytes) inside brackets.
+ */
+
+#define BBC_AID		0x00	/* [B] Agent ID			*/
+#define BBC_DEVP	0x01	/* [B] Device Present		*/
+#define BBC_ARB		0x02	/* [B] Arbitration		*/
+#define BBC_QUIESCE	0x03	/* [B] Quiesce			*/
+#define BBC_WDACTION	0x04	/* [B] Watchdog Action		*/
+#define BBC_SPG		0x06	/* [B] Soft POR Gen		*/
+#define BBC_SXG		0x07	/* [B] Soft XIR Gen		*/
+#define BBC_PSRC	0x08	/* [W] POR Source		*/
+#define BBC_XSRC	0x0c	/* [B] XIR Source		*/
+#define BBC_CSC		0x0d	/* [B] Clock Synthesizers Control*/
+#define BBC_ES_CTRL	0x0e	/* [H] Energy Star Control	*/
+#define BBC_ES_ACT	0x10	/* [W] E* Assert Change Time	*/
+#define BBC_ES_DACT	0x14	/* [B] E* De-Assert Change Time	*/
+#define BBC_ES_DABT	0x15	/* [B] E* De-Assert Bypass Time	*/
+#define BBC_ES_ABT	0x16	/* [H] E* Assert Bypass Time	*/
+#define BBC_ES_PST	0x18	/* [W] E* PLL Settle Time	*/
+#define BBC_ES_FSL	0x1c	/* [W] E* Frequency Switch Latency*/
+#define BBC_EBUST	0x20	/* [Q] EBUS Timing		*/
+#define BBC_JTAG_CMD	0x28	/* [W] JTAG+ Command		*/
+#define BBC_JTAG_CTRL	0x2c	/* [B] JTAG+ Control		*/
+#define BBC_I2C_SEL	0x2d	/* [B] I2C Selection		*/
+#define BBC_I2C_0_S1	0x2e	/* [B] I2C ctrlr-0 reg S1	*/
+#define BBC_I2C_0_S0	0x2f	/* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/
+#define BBC_I2C_1_S1	0x30	/* [B] I2C ctrlr-1 reg S1	*/
+#define BBC_I2C_1_S0	0x31	/* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/
+#define BBC_KBD_BEEP	0x32	/* [B] Keyboard Beep		*/
+#define BBC_KBD_BCNT	0x34	/* [W] Keyboard Beep Counter	*/
+
+#define BBC_REGS_SIZE	0x40
+
+/* There is a 2K scratch ram area at offset 0x80000 but I doubt
+ * we will use it for anything.
+ */
+
+/* Agent ID register.  This register shows the Safari Agent ID
+ * for the processors.  The value returned depends upon which
+ * cpu is reading the register.
+ */
+#define BBC_AID_ID	0x07	/* Safari ID		*/
+#define BBC_AID_RESV	0xf8	/* Reserved		*/
+
+/* Device Present register.  One can determine which cpus are actually
+ * present in the machine by interrogating this register.
+ */
+#define BBC_DEVP_CPU0	0x01	/* Processor 0 present	*/
+#define BBC_DEVP_CPU1	0x02	/* Processor 1 present	*/
+#define BBC_DEVP_CPU2	0x04	/* Processor 2 present	*/
+#define BBC_DEVP_CPU3	0x08	/* Processor 3 present	*/
+#define BBC_DEVP_RESV	0xf0	/* Reserved		*/
+
+/* Arbitration register.  This register is used to block access to
+ * the BBC from a particular cpu.
+ */
+#define BBC_ARB_CPU0	0x01	/* Enable cpu 0 BBC arbitratrion */
+#define BBC_ARB_CPU1	0x02	/* Enable cpu 1 BBC arbitratrion */
+#define BBC_ARB_CPU2	0x04	/* Enable cpu 2 BBC arbitratrion */
+#define BBC_ARB_CPU3	0x08	/* Enable cpu 3 BBC arbitratrion */
+#define BBC_ARB_RESV	0xf0	/* Reserved			 */
+
+/* Quiesce register.  Bus and BBC segments for cpus can be disabled
+ * with this register, ie. for hot plugging.
+ */
+#define BBC_QUIESCE_S02	0x01	/* Quiesce Safari segment for cpu 0 and 2 */
+#define BBC_QUIESCE_S13	0x02	/* Quiesce Safari segment for cpu 1 and 3 */
+#define BBC_QUIESCE_B02	0x04	/* Quiesce BBC segment for cpu 0 and 2    */
+#define BBC_QUIESCE_B13	0x08	/* Quiesce BBC segment for cpu 1 and 3    */
+#define BBC_QUIESCE_FD0 0x10	/* Disable Fatal_Error[0] reporting	  */
+#define BBC_QUIESCE_FD1 0x20	/* Disable Fatal_Error[1] reporting	  */
+#define BBC_QUIESCE_FD2 0x40	/* Disable Fatal_Error[2] reporting	  */
+#define BBC_QUIESCE_FD3 0x80	/* Disable Fatal_Error[3] reporting	  */
+
+/* Watchdog Action register.  When the watchdog device timer expires
+ * a line is enabled to the BBC.  The action BBC takes when this line
+ * is asserted can be controlled by this regiser.
+ */
+#define BBC_WDACTION_RST  0x01	/* When set, watchdog causes system reset.
+				 * When clear, BBC ignores watchdog signal.
+				 */
+#define BBC_WDACTION_RESV 0xfe	/* Reserved */
+
+/* Soft_POR_GEN register.  The POR (Power On Reset) signal may be asserted
+ * for specific processors or all processors via this register.
+ */
+#define BBC_SPG_CPU0	0x01 /* Assert POR for processor 0	*/
+#define BBC_SPG_CPU1	0x02 /* Assert POR for processor 1	*/
+#define BBC_SPG_CPU2	0x04 /* Assert POR for processor 2	*/
+#define BBC_SPG_CPU3	0x08 /* Assert POR for processor 3	*/
+#define BBC_SPG_CPUALL	0x10 /* Reset all processors and reset
+			      * the entire system.
+			      */
+#define BBC_SPG_RESV	0xe0 /* Reserved			*/
+
+/* Soft_XIR_GEN register.  The XIR (eXternally Initiated Reset) signal
+ * may be asserted to specific processors via this register.
+ */
+#define BBC_SXG_CPU0	0x01 /* Assert XIR for processor 0	*/
+#define BBC_SXG_CPU1	0x02 /* Assert XIR for processor 1	*/
+#define BBC_SXG_CPU2	0x04 /* Assert XIR for processor 2	*/
+#define BBC_SXG_CPU3	0x08 /* Assert XIR for processor 3	*/
+#define BBC_SXG_RESV	0xf0 /* Reserved			*/
+
+/* POR Source register.  One may identify the cause of the most recent
+ * reset by reading this register.
+ */
+#define BBC_PSRC_SPG0	0x0001 /* CPU 0 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG1	0x0002 /* CPU 1 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG2	0x0004 /* CPU 2 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG3	0x0008 /* CPU 3 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPGSYS	0x0010 /* System reset via BBC_SPG register	*/
+#define BBC_PSRC_JTAG	0x0020 /* System reset via JTAG+		*/
+#define BBC_PSRC_BUTTON	0x0040 /* System reset via push-button dongle	*/
+#define BBC_PSRC_PWRUP	0x0080 /* System reset via power-up		*/
+#define BBC_PSRC_FE0	0x0100 /* CPU 0 reported Fatal_Error		*/
+#define BBC_PSRC_FE1	0x0200 /* CPU 1 reported Fatal_Error		*/
+#define BBC_PSRC_FE2	0x0400 /* CPU 2 reported Fatal_Error		*/
+#define BBC_PSRC_FE3	0x0800 /* CPU 3 reported Fatal_Error		*/
+#define BBC_PSRC_FE4	0x1000 /* Schizo reported Fatal_Error		*/
+#define BBC_PSRC_FE5	0x2000 /* Safari device 5 reported Fatal_Error	*/
+#define BBC_PSRC_FE6	0x4000 /* CPMS reported Fatal_Error		*/
+#define BBC_PSRC_SYNTH	0x8000 /* System reset when on-board clock synthesizers
+				* were updated.
+				*/
+#define BBC_PSRC_WDT   0x10000 /* System reset via Super I/O watchdog	*/
+#define BBC_PSRC_RSC   0x20000 /* System reset via RSC remote monitoring
+				* device
+				*/
+
+/* XIR Source register.  The source of an XIR event sent to a processor may
+ * be determined via this register.
+ */
+#define BBC_XSRC_SXG0	0x01	/* CPU 0 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG1	0x02	/* CPU 1 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG2	0x04	/* CPU 2 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG3	0x08	/* CPU 3 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_JTAG	0x10	/* All CPUs received XIR via JTAG+         */
+#define BBC_XSRC_W_OR_B	0x20	/* All CPUs received XIR either because:
+				 * a) Super I/O watchdog fired, or
+				 * b) XIR push button was activated
+				 */
+#define BBC_XSRC_RESV	0xc0	/* Reserved				   */
+
+/* Clock Synthesizers Control register.  This register provides the big-bang
+ * programming interface to the two clock synthesizers of the machine.
+ */
+#define BBC_CSC_SLOAD	0x01	/* Directly connected to S_LOAD pins	*/
+#define BBC_CSC_SDATA	0x02	/* Directly connected to S_DATA pins	*/
+#define BBC_CSC_SCLOCK	0x04	/* Directly connected to S_CLOCK pins	*/
+#define BBC_CSC_RESV	0x78	/* Reserved				*/
+#define BBC_CSC_RST	0x80	/* Generate system reset when S_LOAD==1	*/
+
+/* Energy Star Control register.  This register is used to generate the
+ * clock frequency change trigger to the main system devices (Schizo and
+ * the processors).  The transition occurs when bits in this register
+ * go from 0 to 1, only one bit must be set at once else no action
+ * occurs.  Basically the sequence of events is:
+ * a) Choose new frequency: full, 1/2 or 1/32
+ * b) Program this desired frequency into the cpus and Schizo.
+ * c) Set the same value in this register.
+ * d) 16 system clocks later, clear this register.
+ */
+#define BBC_ES_CTRL_1_1		0x01	/* Full frequency	*/
+#define BBC_ES_CTRL_1_2		0x02	/* 1/2 frequency	*/
+#define BBC_ES_CTRL_1_32	0x20	/* 1/32 frequency	*/
+#define BBC_ES_RESV		0xdc	/* Reserved		*/
+
+/* Energy Star Assert Change Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the detection of FREEZE_ACK being asserted and the assertion of
+ * the CLK_CHANGE_L[2:0] signals.
+ */
+#define BBC_ES_ACT_VAL	0xff
+
+/* Energy Star Assert Bypass Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of
+ * the ESTAR_PLL_BYPASS signal.
+ */
+#define BBC_ES_ABT_VAL	0xffff
+
+/* Energy Star PLL Settle Time register.  This determines the number of
+ * BBC clock cycles (which is half the system frequency) between the
+ * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L
+ * signal.
+ */
+#define BBC_ES_PST_VAL	0xffffffff
+
+/* Energy Star Frequency Switch Latency register.  This is the number of
+ * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first
+ * edge of the Safari clock at the new frequency.
+ */
+#define BBC_ES_FSL_VAL	0xffffffff
+
+/* Keyboard Beep control register.  This is a simple enabler for the audio
+ * beep sound.
+ */
+#define BBC_KBD_BEEP_ENABLE	0x01 /* Enable beep	*/
+#define BBC_KBD_BEEP_RESV	0xfe /* Reserved	*/
+
+/* Keyboard Beep Counter register.  There is a free-running counter inside
+ * the BBC which runs at half the system clock.  The bit set in this register
+ * determines when the audio sound is generated.  So for example if bit
+ * 10 is set, the audio beep will oscillate at 1/(2**12).  The keyboard beep
+ * generator automatically selects a different bit to use if the system clock
+ * is changed via Energy Star.
+ */
+#define BBC_KBD_BCNT_BITS	0x0007fc00
+#define BBC_KBC_BCNT_RESV	0xfff803ff
+
+#endif /* _SPARC64_BBC_H */
+
diff --git a/arch/sparc/include/asm/bitext.h b/arch/sparc/include/asm/bitext.h
new file mode 100644
index 00000000000..297b2f2fcb4
--- /dev/null
+++ b/arch/sparc/include/asm/bitext.h
@@ -0,0 +1,27 @@
+/*
+ * bitext.h: Bit string operations on the sparc, specific to architecture.
+ *
+ * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com>
+ */
+
+#ifndef _SPARC_BITEXT_H
+#define _SPARC_BITEXT_H
+
+#include <linux/spinlock.h>
+
+struct bit_map {
+	spinlock_t lock;
+	unsigned long *map;
+	int size;
+	int used;
+	int last_off;
+	int last_size;
+	int first_free;
+	int num_colors;
+};
+
+extern int bit_map_string_get(struct bit_map *t, int len, int align);
+extern void bit_map_clear(struct bit_map *t, int offset, int len);
+extern void bit_map_init(struct bit_map *t, unsigned long *map, int size);
+
+#endif /* defined(_SPARC_BITEXT_H) */
diff --git a/arch/sparc/include/asm/bitops.h b/arch/sparc/include/asm/bitops.h
new file mode 100644
index 00000000000..b1edd94bd64
--- /dev/null
+++ b/arch/sparc/include/asm/bitops.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_BITOPS_H
+#define ___ASM_SPARC_BITOPS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/bitops_64.h>
+#else
+#include <asm/bitops_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
new file mode 100644
index 00000000000..68b98a7e645
--- /dev/null
+++ b/arch/sparc/include/asm/bitops_32.h
@@ -0,0 +1,111 @@
+/*
+ * bitops.h: Bit string operations on the Sparc.
+ *
+ * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1996 Eddie C. Dost   (ecd@skynet.be)
+ * Copyright 2001 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC_BITOPS_H
+#define _SPARC_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask);
+
+/*
+ * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
+ * is in the highest of the four bytes and bit '31' is the high bit
+ * within the first byte. Sparc is BIG-Endian. Unless noted otherwise
+ * all bit-ops return 0 if bit was previously clear and != 0 otherwise.
+ */
+static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___set_bit(ADDR, mask) != 0;
+}
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___set_bit(ADDR, mask);
+}
+
+static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___clear_bit(ADDR, mask) != 0;
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___clear_bit(ADDR, mask);
+}
+
+static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___change_bit(ADDR, mask) != 0;
+}
+
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___change_bit(ADDR, mask);
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#define smp_mb__before_clear_bit()	do { } while(0)
+#define smp_mb__after_clear_bit()	do { } while(0)
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC_BITOPS_H) */
diff --git a/arch/sparc/include/asm/bitops_64.h b/arch/sparc/include/asm/bitops_64.h
new file mode 100644
index 00000000000..bb87b808022
--- /dev/null
+++ b/arch/sparc/include/asm/bitops_64.h
@@ -0,0 +1,107 @@
+/*
+ * bitops.h: Bit string operations on the V9.
+ *
+ * Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_BITOPS_H
+#define _SPARC64_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+extern int test_and_set_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_change_bit(unsigned long nr, volatile unsigned long *addr);
+extern void set_bit(unsigned long nr, volatile unsigned long *addr);
+extern void clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern void change_bit(unsigned long nr, volatile unsigned long *addr);
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#ifdef CONFIG_SMP
+#define smp_mb__before_clear_bit()	membar_storeload_loadload()
+#define smp_mb__after_clear_bit()	membar_storeload_storestore()
+#else
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+#endif
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#ifdef ULTRA_HAS_POPULATION_COUNT
+
+static inline unsigned int hweight64(unsigned long w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w));
+	return res;
+}
+
+static inline unsigned int hweight32(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffffffff));
+	return res;
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffff));
+	return res;
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xff));
+	return res;
+}
+
+#else
+
+#include <asm-generic/bitops/hweight.h>
+
+#endif
+#include <asm-generic/bitops/lock.h>
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock,nr,addr) \
+	test_and_set_bit((nr) ^ 0x38,(unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock,nr,addr) \
+	test_and_clear_bit((nr) ^ 0x38,(unsigned long *)(addr))
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC64_BITOPS_H) */
diff --git a/arch/sparc/include/asm/bpp.h b/arch/sparc/include/asm/bpp.h
new file mode 100644
index 00000000000..31f515e499a
--- /dev/null
+++ b/arch/sparc/include/asm/bpp.h
@@ -0,0 +1,73 @@
+#ifndef _SPARC_BPP_H
+#define _SPARC_BPP_H
+
+/*
+ * Copyright (c) 1995 Picture Elements
+ *	Stephen Williams
+ *	Gus Baldauf
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+#include  <linux/ioctl.h>
+
+/*
+ * This is a driver that supports IEEE Std 1284-1994 communications
+ * with compliant or compatible devices. It will use whatever features
+ * the device supports, prefering those that are typically faster.
+ *
+ * When the device is opened, it is left in COMPATIBILITY mode, and
+ * writes work like any printer device. The driver only attempt to
+ * negotiate 1284 modes when needed so that plugs can be pulled,
+ * switch boxes switched, etc., without disrupting things. It will
+ * also leave the device in compatibility mode when closed.
+ */
+
+
+
+/*
+ * This driver also supplies ioctls to manually manipulate the
+ * pins. This is great for testing devices, or writing code to deal
+ * with bizzarro-mode of the ACME Special TurboThingy Plus.
+ *
+ * NOTE: These ioctl currently do not interact well with
+ * read/write. Caveat emptor.
+ *
+ * PUT_PINS allows us to assign the sense of all the pins, including
+ * the data pins if being driven by the host. The GET_PINS returns the
+ * pins that the peripheral drives, including data if appropriate.
+ */
+
+# define BPP_PUT_PINS _IOW('B', 1, int)
+# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
+# define BPP_PUT_DATA _IOW('B', 3, int)
+# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
+
+/*
+ * Set the data bus to input mode. Disengage the data bin driver and
+ * be prepared to read values from the peripheral. If the arg is 0,
+ * then revert the bus to output mode.
+ */
+# define BPP_SET_INPUT _IOW('B', 5, int)
+
+/*
+ * These bits apply to the PUT operation...
+ */
+# define BPP_PP_nStrobe   0x0001
+# define BPP_PP_nAutoFd   0x0002
+# define BPP_PP_nInit     0x0004
+# define BPP_PP_nSelectIn 0x0008
+
+/*
+ * These apply to the GET operation, which also reads the current value
+ * of the previously put values. A bit mask of these will be returned
+ * as a bit mask in the return code of the ioctl().
+ */
+# define BPP_GP_nAck   0x0100
+# define BPP_GP_Busy   0x0200
+# define BPP_GP_PError 0x0400
+# define BPP_GP_Select 0x0800
+# define BPP_GP_nFault 0x1000
+
+#endif
diff --git a/arch/sparc/include/asm/btfixup.h b/arch/sparc/include/asm/btfixup.h
new file mode 100644
index 00000000000..797722cf69f
--- /dev/null
+++ b/arch/sparc/include/asm/btfixup.h
@@ -0,0 +1,208 @@
+/*
+ *  asm/btfixup.h:    Macros for boot time linking.
+ *
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+ 
+#ifndef _SPARC_BTFIXUP_H
+#define _SPARC_BTFIXUP_H
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef MODULE
+extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
+
+#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
+#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
+#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
+#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
+#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
+
+#else
+
+#define BTFIXUP_SIMM13(__name) ___sf_##__name()
+#define BTFIXUP_HALF(__name) ___af_##__name()
+#define BTFIXUP_SETHI(__name) ___hf_##__name()
+#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
+/* This must be written in assembly and present in a sethi */
+#define BTFIXUP_BLACKBOX(__name) ___b_##__name
+#endif /* MODULE */
+
+/* Fixup call xx */
+
+#define BTFIXUPDEF_CALL(__type, __name, __args...) 					\
+	extern __type ___f_##__name(__args);						\
+	extern unsigned ___fs_##__name[3];
+#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) 				\
+	extern __type ___f_##__name(__args) __attribute_const__;			\
+	extern unsigned ___fs_##__name[3];
+#define BTFIXUP_CALL(__name) ___f_##__name
+
+#define BTFIXUPDEF_BLACKBOX(__name)							\
+	extern unsigned ___bs_##__name[2];
+
+/* Put bottom 13bits into some register variable */
+
+#define BTFIXUPDEF_SIMM13(__name)							\
+	static inline unsigned int ___sf_##__name(void) __attribute_const__;		\
+	extern unsigned ___ss_##__name[2];						\
+	static inline unsigned int ___sf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret));			\
+		return ret;								\
+	}
+#define BTFIXUPDEF_SIMM13_INIT(__name,__val)						\
+	static inline unsigned int ___sf_##__name(void) __attribute_const__;		\
+	extern unsigned ___ss_##__name[2];						\
+	static inline unsigned int ___sf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+		return ret;								\
+	}
+
+/* Put either bottom 13 bits, or upper 22 bits into some register variable
+ * (depending on the value, this will lead into sethi FIX, reg; or
+ * mov FIX, reg; )
+ */
+
+#define BTFIXUPDEF_HALF(__name)								\
+	static inline unsigned int ___af_##__name(void) __attribute_const__;		\
+	extern unsigned ___as_##__name[2];						\
+	static inline unsigned int ___af_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret));			\
+		return ret;								\
+	}
+#define BTFIXUPDEF_HALF_INIT(__name,__val)						\
+	static inline unsigned int ___af_##__name(void) __attribute_const__;		\
+	extern unsigned ___as_##__name[2];						\
+	static inline unsigned int ___af_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+		return ret;								\
+	}
+
+/* Put upper 22 bits into some register variable */
+
+#define BTFIXUPDEF_SETHI(__name)							\
+	static inline unsigned int ___hf_##__name(void) __attribute_const__;		\
+	extern unsigned ___hs_##__name[2];						\
+	static inline unsigned int ___hf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret));		\
+		return ret;								\
+	}
+#define BTFIXUPDEF_SETHI_INIT(__name,__val)						\
+	static inline unsigned int ___hf_##__name(void) __attribute_const__;		\
+	extern unsigned ___hs_##__name[2];						\
+	static inline unsigned int ___hf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : 	\
+			 "=r"(ret));							\
+		return ret;								\
+	}
+
+/* Put a full 32bit integer into some register variable */
+
+#define BTFIXUPDEF_INT(__name)								\
+	extern unsigned char ___i_##__name;						\
+	extern unsigned ___is_##__name[2];
+
+#define BTFIXUPCALL_NORM	0x00000000			/* Always call */
+#define BTFIXUPCALL_NOP		0x01000000			/* Possibly optimize to nop */
+#define BTFIXUPCALL_RETINT(i)	(0x90102000|((i) & 0x1fff))	/* Possibly optimize to mov i, %o0 */
+#define BTFIXUPCALL_ORINT(i)	(0x90122000|((i) & 0x1fff))	/* Possibly optimize to or %o0, i, %o0 */
+#define BTFIXUPCALL_RETO0	0x01000000			/* Return first parameter, actually a nop */
+#define BTFIXUPCALL_ANDNINT(i)	(0x902a2000|((i) & 0x1fff))	/* Possibly optimize to andn %o0, i, %o0 */
+#define BTFIXUPCALL_SWAPO0O1	0xd27a0000			/* Possibly optimize to swap [%o0],%o1 */
+#define BTFIXUPCALL_SWAPO0G0	0xc07a0000			/* Possibly optimize to swap [%o0],%g0 */
+#define BTFIXUPCALL_SWAPG1G2	0xc4784000			/* Possibly optimize to swap [%g1],%g2 */
+#define BTFIXUPCALL_STG0O0	0xc0220000			/* Possibly optimize to st %g0,[%o0] */
+#define BTFIXUPCALL_STO1O0	0xd2220000			/* Possibly optimize to st %o1,[%o0] */
+
+#define BTFIXUPSET_CALL(__name, __addr, __insn)						\
+	do {										\
+		___fs_##__name[0] |= 1;							\
+		___fs_##__name[1] = (unsigned long)__addr;				\
+		___fs_##__name[2] = __insn;						\
+	} while (0)
+	
+#define BTFIXUPSET_BLACKBOX(__name, __func)						\
+	do {										\
+		___bs_##__name[0] |= 1;							\
+		___bs_##__name[1] = (unsigned long)__func;				\
+	} while (0)
+	
+#define BTFIXUPCOPY_CALL(__name, __from)						\
+	do {										\
+		___fs_##__name[0] |= 1;							\
+		___fs_##__name[1] = ___fs_##__from[1];					\
+		___fs_##__name[2] = ___fs_##__from[2];					\
+	} while (0)
+		
+#define BTFIXUPSET_SIMM13(__name, __val)						\
+	do {										\
+		___ss_##__name[0] |= 1;							\
+		___ss_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_SIMM13(__name, __from)						\
+	do {										\
+		___ss_##__name[0] |= 1;							\
+		___ss_##__name[1] = ___ss_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_HALF(__name, __val)							\
+	do {										\
+		___as_##__name[0] |= 1;							\
+		___as_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_HALF(__name, __from)						\
+	do {										\
+		___as_##__name[0] |= 1;							\
+		___as_##__name[1] = ___as_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_SETHI(__name, __val)							\
+	do {										\
+		___hs_##__name[0] |= 1;							\
+		___hs_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_SETHI(__name, __from)						\
+	do {										\
+		___hs_##__name[0] |= 1;							\
+		___hs_##__name[1] = ___hs_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_INT(__name, __val)							\
+	do {										\
+		___is_##__name[0] |= 1;							\
+		___is_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_INT(__name, __from)							\
+	do {										\
+		___is_##__name[0] |= 1;							\
+		___is_##__name[1] = ___is_##__from[1];					\
+	} while (0)
+	
+#define BTFIXUPVAL_CALL(__name)								\
+	((unsigned long)___fs_##__name[1])
+	
+extern void btfixup(void);
+
+#else /* __ASSEMBLY__ */
+
+#define BTFIXUP_SETHI(__name)			%hi(___h_ ## __name)
+#define BTFIXUP_SETHI_INIT(__name,__val)	%hi(___h_ ## __name ## __btset_ ## __val)
+
+#endif /* __ASSEMBLY__ */
+	
+#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/arch/sparc/include/asm/bug.h b/arch/sparc/include/asm/bug.h
new file mode 100644
index 00000000000..8a59e5a8c21
--- /dev/null
+++ b/arch/sparc/include/asm/bug.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC_BUG_H
+#define _SPARC_BUG_H
+
+#ifdef CONFIG_BUG
+#include <linux/compiler.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void do_BUG(const char *file, int line);
+#define BUG() do {					\
+	do_BUG(__FILE__, __LINE__);			\
+	__builtin_trap();				\
+} while (0)
+#else
+#define BUG()		__builtin_trap()
+#endif
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h
new file mode 100644
index 00000000000..e179bc12f64
--- /dev/null
+++ b/arch/sparc/include/asm/bugs.h
@@ -0,0 +1,24 @@
+/* include/asm/bugs.h:  Sparc probes for various bugs.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef CONFIG_SPARC32
+#include <asm/cpudata.h>
+#endif
+
+#ifdef CONFIG_SPARC64
+#include <asm/sstate.h>
+#endif
+
+extern unsigned long loops_per_jiffy;
+
+static void __init check_bugs(void)
+{
+#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
+	cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+#ifdef CONFIG_SPARC64
+	sstate_running();
+#endif
+}
diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h
new file mode 100644
index 00000000000..bcd83aa351c
--- /dev/null
+++ b/arch/sparc/include/asm/byteorder.h
@@ -0,0 +1,57 @@
+#ifndef _SPARC_BYTEORDER_H
+#define _SPARC_BYTEORDER_H
+
+#include <asm/types.h>
+#include <asm/asi.h>
+
+#ifdef __GNUC__
+
+#ifdef CONFIG_SPARC32
+#define __SWAB_64_THRU_32__
+#endif
+
+#ifdef CONFIG_SPARC64
+
+static inline __u16 ___arch__swab16p(const __u16 *addr)
+{
+	__u16 ret;
+
+	__asm__ __volatile__ ("lduha [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+static inline __u32 ___arch__swab32p(const __u32 *addr)
+{
+	__u32 ret;
+
+	__asm__ __volatile__ ("lduwa [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+static inline __u64 ___arch__swab64p(const __u64 *addr)
+{
+	__u64 ret;
+
+	__asm__ __volatile__ ("ldxa [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+#define __arch__swab16p(x) ___arch__swab16p(x)
+#define __arch__swab32p(x) ___arch__swab32p(x)
+#define __arch__swab64p(x) ___arch__swab64p(x)
+
+#endif /* CONFIG_SPARC64 */
+
+#define __BYTEORDER_HAS_U64__
+
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _SPARC_BYTEORDER_H */
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
new file mode 100644
index 00000000000..41f85ae4bd4
--- /dev/null
+++ b/arch/sparc/include/asm/cache.h
@@ -0,0 +1,138 @@
+/* cache.h:  Cache specific code for the Sparc.  These include flushing
+ *           and direct tag/data line access.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC_CACHE_H
+#define _SPARC_CACHE_H
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
+
+#ifdef CONFIG_SPARC32
+#define SMP_CACHE_BYTES_SHIFT 5
+#else
+#define SMP_CACHE_BYTES_SHIFT 6
+#endif
+
+#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifdef CONFIG_SPARC32
+#include <asm/asi.h>
+
+/* Direct access to the instruction cache is provided through and
+ * alternate address space.  The IDC bit must be off in the ICCR on
+ * HyperSparcs for these accesses to work.  The code below does not do
+ * any checking, the caller must do so.  These routines are for
+ * diagnostics only, but could end up being useful.  Use with care.
+ * Also, you are asking for trouble if you execute these in one of the
+ * three instructions following a %asr/%psr access or modification.
+ */
+
+/* First, cache-tag access. */
+static inline unsigned int get_icache_tag(int setnum, int tagnum)
+{
+	unsigned int vaddr, retval;
+
+	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (vaddr), "i" (ASI_M_TXTC_TAG));
+	return retval;
+}
+
+static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry)
+{
+	unsigned int vaddr;
+
+	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
+			     "memory");
+}
+
+/* Second cache-data access.  The data is returned two-32bit quantities
+ * at a time.
+ */
+static inline void get_icache_data(int setnum, int tagnum, int subblock,
+				       unsigned int *data)
+{
+	unsigned int value1, value2, vaddr;
+
+	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+		((subblock&0x3) << 3);
+	__asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
+			     "or %%g0, %%g2, %0\n\t"
+			     "or %%g0, %%g3, %1\n\t" :
+			     "=r" (value1), "=r" (value2) :
+			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+			     "g2", "g3");
+	data[0] = value1; data[1] = value2;
+}
+
+static inline void put_icache_data(int setnum, int tagnum, int subblock,
+				       unsigned int *data)
+{
+	unsigned int value1, value2, vaddr;
+
+	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+		((subblock&0x3) << 3);
+	value1 = data[0]; value2 = data[1];
+	__asm__ __volatile__("or %%g0, %0, %%g2\n\t"
+			     "or %%g0, %1, %%g3\n\t"
+			     "stda %%g2, [%2] %3\n\t" : :
+			     "r" (value1), "r" (value2), 
+			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+			     "g2", "g3", "memory" /* no joke */);
+}
+
+/* Different types of flushes with the ICACHE.  Some of the flushes
+ * affect both the ICACHE and the external cache.  Others only clear
+ * the ICACHE entries on the cpu itself.  V8's (most) allow
+ * granularity of flushes on the packet (element in line), whole line,
+ * and entire cache (ie. all lines) level.  The ICACHE only flushes are
+ * ROSS HyperSparc specific and are in ross.h
+ */
+
+/* Flushes which clear out both the on-chip and external caches */
+static inline void flush_ei_page(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
+			     "memory");
+}
+
+static inline void flush_ei_seg(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_SEG) :
+			     "memory");
+}
+
+static inline void flush_ei_region(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_REGION) :
+			     "memory");
+}
+
+static inline void flush_ei_ctx(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_CTX) :
+			     "memory");
+}
+
+static inline void flush_ei_user(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_USER) :
+			     "memory");
+}
+#endif /* CONFIG_SPARC32 */
+
+#endif /* !(_SPARC_CACHE_H) */
diff --git a/arch/sparc/include/asm/cacheflush.h b/arch/sparc/include/asm/cacheflush.h
new file mode 100644
index 00000000000..049168087b1
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CACHEFLUSH_H
+#define ___ASM_SPARC_CACHEFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cacheflush_64.h>
+#else
+#include <asm/cacheflush_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
new file mode 100644
index 00000000000..68ac1091027
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush_32.h
@@ -0,0 +1,85 @@
+#ifndef _SPARC_CACHEFLUSH_H
+#define _SPARC_CACHEFLUSH_H
+
+#include <linux/mm.h>		/* Common for other includes */
+// #include <linux/kernel.h> from pgalloc.h
+// #include <linux/sched.h>  from pgalloc.h
+
+// #include <asm/page.h>
+#include <asm/btfixup.h>
+
+/*
+ * Fine grained cache flushing.
+ */
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_cache_all, void)
+BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)()
+#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm)
+#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end)
+#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr)
+
+BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr)
+#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr)
+
+extern void smp_flush_cache_all(void);
+extern void smp_flush_cache_mm(struct mm_struct *mm);
+extern void smp_flush_cache_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page);
+
+extern void smp_flush_page_to_ram(unsigned long page);
+extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_cache_all, void)
+BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)()
+#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma, pg)		do { } while (0)
+
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr)
+#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr)
+
+extern void sparc_flush_page_to_ram(struct page *page);
+
+#define flush_dcache_page(page)			sparc_flush_page_to_ram(page)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#endif /* _SPARC_CACHEFLUSH_H */
diff --git a/arch/sparc/include/asm/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
new file mode 100644
index 00000000000..c43321729b3
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush_64.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC64_CACHEFLUSH_H
+#define _SPARC64_CACHEFLUSH_H
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/mm.h>
+
+/* Cache flush operations. */
+
+/* These are the same regardless of whether this is an SMP kernel or not. */
+#define flush_cache_mm(__mm) \
+	do { if ((__mm) == current->mm) flushw_user(); } while(0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+#define flush_cache_range(vma, start, end) \
+	flush_cache_mm((vma)->vm_mm)
+#define flush_cache_page(vma, page, pfn) \
+	flush_cache_mm((vma)->vm_mm)
+
+/*
+ * On spitfire, the icache doesn't snoop local stores and we don't
+ * use block commit stores (which invalidate icache lines) during
+ * module load, so we need this.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void __flush_icache_page(unsigned long);
+
+extern void __flush_dcache_page(void *addr, int flush_icache);
+extern void flush_dcache_page_impl(struct page *page);
+#ifdef CONFIG_SMP
+extern void smp_flush_dcache_page_impl(struct page *page, int cpu);
+extern void flush_dcache_page_all(struct mm_struct *mm, struct page *page);
+#else
+#define smp_flush_dcache_page_impl(page,cpu) flush_dcache_page_impl(page)
+#define flush_dcache_page_all(mm,page) flush_dcache_page_impl(page)
+#endif
+
+extern void __flush_dcache_range(unsigned long start, unsigned long end);
+extern void flush_dcache_page(struct page *page);
+
+#define flush_icache_page(vma, pg)	do { } while(0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+extern void flush_ptrace_access(struct vm_area_struct *, struct page *,
+				unsigned long uaddr, void *kaddr,
+				unsigned long len, int write);
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+	do {								\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));	\
+		memcpy(dst, src, len);					\
+		flush_ptrace_access(vma, page, vaddr, src, len, 0);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) 		\
+	do {								\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));	\
+		memcpy(dst, src, len);					\
+		flush_ptrace_access(vma, page, vaddr, dst, len, 1);	\
+	} while (0)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+/* internal debugging function */
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_CACHEFLUSH_H */
diff --git a/arch/sparc/include/asm/chafsr.h b/arch/sparc/include/asm/chafsr.h
new file mode 100644
index 00000000000..85c69b38220
--- /dev/null
+++ b/arch/sparc/include/asm/chafsr.h
@@ -0,0 +1,241 @@
+#ifndef _SPARC64_CHAFSR_H
+#define _SPARC64_CHAFSR_H
+
+/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+/* Comments indicate which processor variants on which the bit definition
+ * is valid.  Codes are:
+ * ch	-->	cheetah
+ * ch+	-->	cheetah plus
+ * jp	-->	jalapeno
+ */
+
+/* All bits of this register except M_SYNDROME and E_SYNDROME are
+ * read, write 1 to clear.  M_SYNDROME and E_SYNDROME are read-only.
+ */
+
+/* Software bit set by linux trap handlers to indicate that the trap was
+ * signalled at %tl >= 1.
+ */
+#define CHAFSR_TL1		(1UL << 63UL) /* n/a */
+
+/* Unmapped error from system bus for prefetch queue or
+ * store queue read operation
+ */
+#define CHPAFSR_DTO		(1UL << 59UL) /* ch+ */
+
+/* Bus error from system bus for prefetch queue or store queue
+ * read operation
+ */
+#define CHPAFSR_DBERR		(1UL << 58UL) /* ch+ */
+
+/* Hardware corrected E-cache Tag ECC error */
+#define CHPAFSR_THCE		(1UL << 57UL) /* ch+ */
+/* System interface protocol error, hw timeout caused */
+#define JPAFSR_JETO		(1UL << 57UL) /* jp */
+
+/* SW handled correctable E-cache Tag ECC error */
+#define CHPAFSR_TSCE		(1UL << 56UL) /* ch+ */
+/* Parity error on system snoop results */
+#define JPAFSR_SCE		(1UL << 56UL) /* jp */
+
+/* Uncorrectable E-cache Tag ECC error */
+#define CHPAFSR_TUE		(1UL << 55UL) /* ch+ */
+/* System interface protocol error, illegal command detected */
+#define JPAFSR_JEIC		(1UL << 55UL) /* jp */
+
+/* Uncorrectable system bus data ECC error due to prefetch
+ * or store fill request
+ */
+#define CHPAFSR_DUE		(1UL << 54UL) /* ch+ */
+/* System interface protocol error, illegal ADTYPE detected */
+#define JPAFSR_JEIT		(1UL << 54UL) /* jp */
+
+/* Multiple errors of the same type have occurred.  This bit is set when
+ * an uncorrectable error or a SW correctable error occurs and the status
+ * bit to report that error is already set.  When multiple errors of
+ * different types are indicated by setting multiple status bits.
+ *
+ * This bit is not set if multiple HW corrected errors with the same
+ * status bit occur, only uncorrectable and SW correctable ones have
+ * this behavior.
+ *
+ * This bit is not set when multiple ECC errors happen within a single
+ * 64-byte system bus transaction.  Only the first ECC error in a 16-byte
+ * subunit will be logged.  All errors in subsequent 16-byte subunits
+ * from the same 64-byte transaction are ignored.
+ */
+#define CHAFSR_ME		(1UL << 53UL) /* ch,ch+,jp */
+
+/* Privileged state error has occurred.  This is a capture of PSTATE.PRIV
+ * at the time the error is detected.
+ */
+#define CHAFSR_PRIV		(1UL << 52UL) /* ch,ch+,jp */
+
+/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error
+ * bits and record the most recently detected errors.  Bits accumulate
+ * errors that have been detected since the last write to clear the bit.
+ */
+
+/* System interface protocol error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_PERR		(1UL << 51UL) /* ch,ch+,jp */
+
+/* Internal processor error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_IERR		(1UL << 50UL) /* ch,ch+,jp */
+
+/* System request parity error on incoming address */
+#define CHAFSR_ISAP		(1UL << 49UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus MTAG ECC error */
+#define CHAFSR_EMC		(1UL << 48UL) /* ch,ch+ */
+/* Parity error on L2 cache tag SRAM */
+#define JPAFSR_ETP		(1UL << 48UL) /* jp */
+
+/* Uncorrectable system bus MTAG ECC error */
+#define CHAFSR_EMU		(1UL << 47UL) /* ch,ch+ */
+/* Out of range memory error has occurred */
+#define JPAFSR_OM		(1UL << 47UL) /* jp */
+
+/* HW Corrected system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVC		(1UL << 46UL) /* ch,ch+ */
+/* Error due to unsupported store */
+#define JPAFSR_UMS		(1UL << 46UL) /* jp */
+
+/* Uncorrectable system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVU		(1UL << 45UL) /* ch,ch+,jp */
+
+/* Unmapped error from system bus */
+#define CHAFSR_TO		(1UL << 44UL) /* ch,ch+,jp */
+
+/* Bus error response from system bus */
+#define CHAFSR_BERR		(1UL << 43UL) /* ch,ch+,jp */
+
+/* SW Correctable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCC		(1UL << 42UL) /* ch,ch+,jp */
+
+/* Uncorrectable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCU		(1UL << 41UL) /* ch,ch+,jp */
+
+/* Copyout HW Corrected ECC error */
+#define CHAFSR_CPC		(1UL << 40UL) /* ch,ch+,jp */
+
+/* Copyout Uncorrectable ECC error */
+#define CHAFSR_CPU		(1UL << 39UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for writeback */
+#define CHAFSR_WDC		(1UL << 38UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for writeback */
+#define CHAFSR_WDU		(1UL << 37UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDC		(1UL << 36UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDU		(1UL << 35UL) /* ch,ch+,jp */
+
+/* Uncorrectable system bus data ECC error for read of memory or I/O */
+#define CHAFSR_UE		(1UL << 34UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus data ECC error for read of memory or I/O */
+#define CHAFSR_CE		(1UL << 33UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from remote cache/memory */
+#define JPAFSR_RUE		(1UL << 32UL) /* jp */
+
+/* Correctable ECC error from remote cache/memory */
+#define JPAFSR_RCE		(1UL << 31UL) /* jp */
+
+/* JBUS parity error on returned read data */
+#define JPAFSR_BP		(1UL << 30UL) /* jp */
+
+/* JBUS parity error on data for writeback or block store */
+#define JPAFSR_WBP		(1UL << 29UL) /* jp */
+
+/* Foreign read to DRAM incurring correctable ECC error */
+#define JPAFSR_FRC		(1UL << 28UL) /* jp */
+
+/* Foreign read to DRAM incurring uncorrectable ECC error */
+#define JPAFSR_FRU		(1UL << 27UL) /* jp */
+
+#define CHAFSR_ERRORS		(CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define CHPAFSR_ERRORS		(CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \
+				 CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \
+				 CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define JPAFSR_ERRORS		(JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \
+				 JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \
+				 CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \
+				 JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \
+				 CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \
+				 CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \
+				 CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \
+				 JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \
+				 JPAFSR_FRC | JPAFSR_FRU)
+
+/* Active JBUS request signal when error occurred */
+#define JPAFSR_JBREQ		(0x7UL << 24UL) /* jp */
+#define JPAFSR_JBREQ_SHIFT	24UL
+
+/* L2 cache way information */
+#define JPAFSR_ETW		(0x3UL << 22UL) /* jp */
+#define JPAFSR_ETW_SHIFT	22UL
+
+/* System bus MTAG ECC syndrome.  This field captures the status of the
+ * first occurrence of the highest-priority error according to the M_SYND
+ * overwrite policy.  After the AFSR sticky bit, corresponding to the error
+ * for which the M_SYND is reported, is cleared, the contents of the M_SYND
+ * field will be unchanged by will be unfrozen for further error capture.
+ */
+#define CHAFSR_M_SYNDROME	(0xfUL << 16UL) /* ch,ch+,jp */
+#define CHAFSR_M_SYNDROME_SHIFT	16UL
+
+/* Agenid Id of the foreign device causing the UE/CE errors */
+#define JPAFSR_AID		(0x1fUL << 9UL) /* jp */
+#define JPAFSR_AID_SHIFT	9UL
+
+/* System bus or E-cache data ECC syndrome.  This field captures the status
+ * of the first occurrence of the highest-priority error according to the
+ * E_SYND overwrite policy.  After the AFSR sticky bit, corresponding to the
+ * error for which the E_SYND is reported, is cleare, the contents of the E_SYND
+ * field will be unchanged but will be unfrozen for further error capture.
+ */
+#define CHAFSR_E_SYNDROME	(0x1ffUL << 0UL) /* ch,ch+,jp */
+#define CHAFSR_E_SYNDROME_SHIFT	0UL
+
+/* The AFSR must be explicitly cleared by software, it is not cleared automatically
+ * by a read.  Writes to bits <51:33> with bits set will clear the corresponding
+ * bits in the AFSR.  Bits associated with disrupting traps must be cleared before
+ * interrupts are re-enabled to prevent multiple traps for the same error.  I.e.
+ * PSTATE.IE and AFSR bits control delivery of disrupting traps.
+ *
+ * Since there is only one AFAR, when multiple events have been logged by the
+ * bits in the AFSR, at most one of these events will have its status captured
+ * in the AFAR.  The highest priority of those event bits will get AFAR logging.
+ * The AFAR will be unlocked and available to capture the address of another event
+ * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is
+ * cleared.  For example, if AFSR.CE is detected, then AFSR.UE (which overwrites
+ * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked
+ * and ready for another event, even though AFSR.CE is still set.  The same rules
+ * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR.
+ */
+
+#endif /* _SPARC64_CHAFSR_H */
diff --git a/arch/sparc/include/asm/checksum.h b/arch/sparc/include/asm/checksum.h
new file mode 100644
index 00000000000..7ac0d7497bc
--- /dev/null
+++ b/arch/sparc/include/asm/checksum.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CHECKSUM_H
+#define ___ASM_SPARC_CHECKSUM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/checksum_64.h>
+#else
+#include <asm/checksum_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/checksum_32.h b/arch/sparc/include/asm/checksum_32.h
new file mode 100644
index 00000000000..bdbda1453aa
--- /dev/null
+++ b/arch/sparc/include/asm/checksum_32.h
@@ -0,0 +1,241 @@
+#ifndef __SPARC_CHECKSUM_H
+#define __SPARC_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the Sparc.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *	Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/* the same as csum_partial, but copies from fs:src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *);
+
+static inline __wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+	register unsigned int ret asm("o0") = (unsigned int)src;
+	register char *d asm("o1") = dst;
+	register int l asm("g1") = len;
+
+	__asm__ __volatile__ (
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" mov %6, %%g7\n"
+	: "=&r" (ret), "=&r" (d), "=&r" (l)
+	: "0" (ret), "1" (d), "2" (l), "r" (sum)
+	: "o2", "o3", "o4", "o5", "o7",
+	  "g2", "g3", "g4", "g5", "g7",
+	  "memory", "cc");
+	return (__force __wsum)ret;
+}
+
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+			    __wsum sum, int *err)
+  {
+	register unsigned long ret asm("o0") = (unsigned long)src;
+	register char *d asm("o1") = dst;
+	register int l asm("g1") = len;
+	register __wsum s asm("g7") = sum;
+
+	__asm__ __volatile__ (
+	".section __ex_table,#alloc\n\t"
+	".align 4\n\t"
+	".word 1f,2\n\t"
+	".previous\n"
+	"1:\n\t"
+	"call __csum_partial_copy_sparc_generic\n\t"
+	" st %8, [%%sp + 64]\n"
+	: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+	: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+	: "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5",
+	  "cc", "memory");
+	return (__force __wsum)ret;
+}
+
+static inline __wsum
+csum_partial_copy_to_user(const void *src, void __user *dst, int len,
+			  __wsum sum, int *err)
+{
+	if (!access_ok (VERIFY_WRITE, dst, len)) {
+		*err = -EFAULT;
+		return sum;
+	} else {
+		register unsigned long ret asm("o0") = (unsigned long)src;
+		register char __user *d asm("o1") = dst;
+		register int l asm("g1") = len;
+		register __wsum s asm("g7") = sum;
+
+		__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,1\n\t"
+		".previous\n"
+		"1:\n\t"
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" st %8, [%%sp + 64]\n"
+		: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+		: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+		: "o2", "o3", "o4", "o5", "o7",
+		  "g2", "g3", "g4", "g5",
+		  "cc", "memory");
+		return (__force __wsum)ret;
+	}
+}
+
+#define HAVE_CSUM_COPY_USER
+#define csum_and_copy_to_user csum_partial_copy_to_user
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	__sum16 sum;
+
+	/* Note: We must read %2 before we touch %0 for the first time,
+	 *       because GCC can legitimately use the same register for
+	 *       both operands.
+	 */
+	__asm__ __volatile__("sub\t%2, 4, %%g4\n\t"
+			     "ld\t[%1 + 0x00], %0\n\t"
+			     "ld\t[%1 + 0x04], %%g2\n\t"
+			     "ld\t[%1 + 0x08], %%g3\n\t"
+			     "addcc\t%%g2, %0, %0\n\t"
+			     "addxcc\t%%g3, %0, %0\n\t"
+			     "ld\t[%1 + 0x0c], %%g2\n\t"
+			     "ld\t[%1 + 0x10], %%g3\n\t"
+			     "addxcc\t%%g2, %0, %0\n\t"
+			     "addx\t%0, %%g0, %0\n"
+			     "1:\taddcc\t%%g3, %0, %0\n\t"
+			     "add\t%1, 4, %1\n\t"
+			     "addxcc\t%0, %%g0, %0\n\t"
+			     "subcc\t%%g4, 1, %%g4\n\t"
+			     "be,a\t2f\n\t"
+			     "sll\t%0, 16, %%g2\n\t"
+			     "b\t1b\n\t"
+			     "ld\t[%1 + 0x10], %%g3\n"
+			     "2:\taddcc\t%0, %%g2, %%g2\n\t"
+			     "srl\t%%g2, 16, %0\n\t"
+			     "addx\t%0, %%g0, %0\n\t"
+			     "xnor\t%%g0, %0, %0"
+			     : "=r" (sum), "=&r" (iph)
+			     : "r" (ihl), "1" (iph)
+			     : "g2", "g3", "g4", "cc", "memory");
+	return sum;
+}
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__("addcc\t%0, %1, %1\n\t"
+			     "srl\t%1, 16, %1\n\t"
+			     "addx\t%1, %%g0, %1\n\t"
+			     "xnor\t%%g0, %1, %0"
+			     : "=&r" (sum), "=r" (tmp)
+			     : "0" (sum), "1" ((__force u32)sum<<16)
+			     : "cc");
+	return (__force __sum16)sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned short len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	__asm__ __volatile__("addcc\t%1, %0, %0\n\t"
+			     "addxcc\t%2, %0, %0\n\t"
+			     "addxcc\t%3, %0, %0\n\t"
+			     "addx\t%0, %%g0, %0\n\t"
+			     : "=r" (sum), "=r" (saddr)
+			     : "r" (daddr), "r" (proto + len), "0" (sum),
+			       "1" (saddr)
+			     : "cc");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	__asm__ __volatile__ (
+		"addcc	%3, %4, %%g4\n\t"
+		"addxcc	%5, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x0c], %%g2\n\t"
+		"ld	[%2 + 0x08], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x04], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x00], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x0c], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x08], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x04], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x00], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"addxcc	%%g3, %%g4, %0\n\t"
+		"addx	0, %0, %0\n"
+		: "=&r" (sum)
+		: "r" (saddr), "r" (daddr),
+		  "r"(htonl(len)), "r"(htonl(proto)), "r"(sum)
+		: "g2", "g3", "g4", "cc");
+
+	return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC_CHECKSUM_H) */
diff --git a/arch/sparc/include/asm/checksum_64.h b/arch/sparc/include/asm/checksum_64.h
new file mode 100644
index 00000000000..019b9615e43
--- /dev/null
+++ b/arch/sparc/include/asm/checksum_64.h
@@ -0,0 +1,167 @@
+#ifndef __SPARC64_CHECKSUM_H
+#define __SPARC64_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the V9.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *	Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void * buff, int len, __wsum sum);
+
+/* the same as csum_partial, but copies from user space while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					      int len, __wsum sum);
+
+extern long __csum_partial_copy_from_user(const void __user *src,
+					  void *dst, int len,
+					  __wsum sum);
+
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src,
+			    void *dst, int len,
+			    __wsum sum, int *err)
+{
+	long ret = __csum_partial_copy_from_user(src, dst, len, sum);
+	if (ret < 0)
+		*err = -EFAULT;
+	return (__force __wsum) ret;
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern long __csum_partial_copy_to_user(const void *src,
+					void __user *dst, int len,
+					  __wsum sum);
+
+static inline __wsum
+csum_and_copy_to_user(const void *src,
+		      void __user *dst, int len,
+		      __wsum sum, int *err)
+{
+	long ret = __csum_partial_copy_to_user(src, dst, len, sum);
+	if (ret < 0)
+		*err = -EFAULT;
+	return (__force __wsum) ret;
+}
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__(
+"	addcc		%0, %1, %1\n"
+"	srl		%1, 16, %1\n"
+"	addc		%1, %%g0, %1\n"
+"	xnor		%%g0, %1, %0\n"
+	: "=&r" (sum), "=r" (tmp)
+	: "0" (sum), "1" ((__force u32)sum<<16)
+	: "cc");
+	return (__force __sum16)sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned int len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	__asm__ __volatile__(
+"	addcc		%1, %0, %0\n"
+"	addccc		%2, %0, %0\n"
+"	addccc		%3, %0, %0\n"
+"	addc		%0, %%g0, %0\n"
+	: "=r" (sum), "=r" (saddr)
+	: "r" (daddr), "r" (proto + len), "0" (sum), "1" (saddr)
+	: "cc");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	__asm__ __volatile__ (
+"	addcc		%3, %4, %%g7\n"
+"	addccc		%5, %%g7, %%g7\n"
+"	lduw		[%2 + 0x0c], %%g2\n"
+"	lduw		[%2 + 0x08], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%2 + 0x04], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%2 + 0x00], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%1 + 0x0c], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%1 + 0x08], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%1 + 0x04], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%1 + 0x00], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	addccc		%%g3, %%g7, %0\n"
+"	addc		0, %0, %0\n"
+	: "=&r" (sum)
+	: "r" (saddr), "r" (daddr), "r"(htonl(len)),
+	  "r"(htonl(proto)), "r"(sum)
+	: "g2", "g3", "g7", "cc");
+
+	return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC64_CHECKSUM_H) */
diff --git a/arch/sparc/include/asm/chmctrl.h b/arch/sparc/include/asm/chmctrl.h
new file mode 100644
index 00000000000..859b4a4b0d3
--- /dev/null
+++ b/arch/sparc/include/asm/chmctrl.h
@@ -0,0 +1,183 @@
+#ifndef _SPARC64_CHMCTRL_H
+#define _SPARC64_CHMCTRL_H
+
+/* Cheetah memory controller programmable registers. */
+#define CHMCTRL_TCTRL1		0x00 /* Memory Timing Control I		*/
+#define CHMCTRL_TCTRL2		0x08 /* Memory Timing Control II	*/
+#define CHMCTRL_TCTRL3		0x38 /* Memory Timing Control III	*/
+#define CHMCTRL_TCTRL4		0x40 /* Memory Timing Control IV	*/
+#define CHMCTRL_DECODE1		0x10 /* Memory Address Decode I		*/
+#define CHMCTRL_DECODE2		0x18 /* Memory Address Decode II	*/
+#define CHMCTRL_DECODE3		0x20 /* Memory Address Decode III	*/
+#define CHMCTRL_DECODE4		0x28 /* Memory Address Decode IV	*/
+#define CHMCTRL_MACTRL		0x30 /* Memory Address Control		*/
+
+/* Memory Timing Control I */
+#define TCTRL1_SDRAMCTL_DLY	0xf000000000000000UL
+#define TCTRL1_SDRAMCTL_DLY_SHIFT     60
+#define TCTRL1_SDRAMCLK_DLY	0x0e00000000000000UL
+#define TCTRL1_SDRAMCLK_DLY_SHIFT     57
+#define TCTRL1_R		0x0100000000000000UL
+#define TCTRL1_R_SHIFT 		      56
+#define TCTRL1_AUTORFR_CYCLE	0x00fe000000000000UL
+#define TCTRL1_AUTORFR_CYCLE_SHIFT    49
+#define TCTRL1_RD_WAIT		0x0001f00000000000UL
+#define TCTRL1_RD_WAIT_SHIFT	      44
+#define TCTRL1_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL1_PC_CYCLE_SHIFT	      38
+#define TCTRL1_WR_MORE_RAS_PW	0x0000003f00000000UL
+#define TCTRL1_WR_MORE_RAS_PW_SHIFT   32
+#define TCTRL1_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL1_RD_MORE_RAS_PW_SHIFT   26
+#define TCTRL1_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL1_ACT_WR_DLY_SHIFT	      20
+#define TCTRL1_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL1_ACT_RD_DLY_SHIFT	      14
+#define TCTRL1_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL1_BANK_PRESENT_SHIFT     12
+#define TCTRL1_RFR_INT		0x0000000000000ff8UL
+#define TCTRL1_RFR_INT_SHIFT	      3
+#define TCTRL1_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL1_SET_MODE_REG_SHIFT     2
+#define TCTRL1_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL1_RFR_ENABLE_SHIFT	      1
+#define TCTRL1_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL1_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control II */
+#define TCTRL2_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL2_WR_MSEL_DLY_SHIFT      58
+#define TCTRL2_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL2_RD_MSEL_DLY_SHIFT      52
+#define TCTRL2_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL2_WRDATA_THLD_SHIFT      50
+#define TCTRL2_RDWR_RD_TI_DLY	0x0003f00000000000UL
+#define TCTRL2_RDWR_RD_TI_DLY_SHIFT   44
+#define TCTRL2_AUTOPRECHG_ENBL	0x0000080000000000UL
+#define TCTRL2_AUTOPRECHG_ENBL_SHIFT  43
+#define TCTRL2_RDWR_PI_MORE_DLY	0x000007c000000000UL
+#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38
+#define TCTRL2_RDWR_1_DLY	0x0000003f00000000UL
+#define TCTRL2_RDWR_1_DLY_SHIFT       32
+#define TCTRL2_WRWR_PI_MORE_DLY	0x00000000f8000000UL
+#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27
+#define TCTRL2_WRWR_1_DLY	0x0000000007e00000UL
+#define TCTRL2_WRWR_1_DLY_SHIFT       21
+#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL
+#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL2_R		0x0000000000008000UL
+#define TCTRL2_R_SHIFT		      15
+#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* Memory Timing Control III */
+#define TCTRL3_SDRAM_CTL_DLY	0xf000000000000000UL
+#define TCTRL3_SDRAM_CTL_DLY_SHIFT    60
+#define TCTRL3_SDRAM_CLK_DLY	0x0e00000000000000UL
+#define TCTRL3_SDRAM_CLK_DLY_SHIFT    57
+#define TCTRL3_R		0x0100000000000000UL
+#define TCTRL3_R_SHIFT		      56
+#define TCTRL3_AUTO_RFR_CYCLE	0x00fe000000000000UL
+#define TCTRL3_AUTO_RFR_CYCLE_SHIFT   49
+#define TCTRL3_RD_WAIT		0x0001f00000000000UL
+#define TCTRL3_RD_WAIT_SHIFT	      44
+#define TCTRL3_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL3_PC_CYCLE_SHIFT	      38
+#define TCTRL3_WR_MORE_RAW_PW	0x0000003f00000000UL
+#define TCTRL3_WR_MORE_RAW_PW_SHIFT   32
+#define TCTRL3_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL3_RD_MORE_RAW_PW_SHIFT   26
+#define TCTRL3_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL3_ACT_WR_DLY_SHIFT       20
+#define TCTRL3_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL3_ACT_RD_DLY_SHIFT       14
+#define TCTRL3_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL3_BANK_PRESENT_SHIFT     12
+#define TCTRL3_RFR_INT		0x0000000000000ff8UL
+#define TCTRL3_RFR_INT_SHIFT	      3
+#define TCTRL3_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL3_SET_MODE_REG_SHIFT     2
+#define TCTRL3_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL3_RFR_ENABLE_SHIFT       1
+#define TCTRL3_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL3_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control IV */
+#define TCTRL4_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL4_WR_MSEL_DLY_SHIFT      58
+#define TCTRL4_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL4_RD_MSEL_DLY_SHIFT      52
+#define TCTRL4_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL4_WRDATA_THLD_SHIFT      50
+#define TCTRL4_RDWR_RD_RI_DLY	0x0003f00000000000UL
+#define TCTRL4_RDWR_RD_RI_DLY_SHIFT   44
+#define TCTRL4_AUTO_PRECHG_ENBL	0x0000080000000000UL
+#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43
+#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL
+#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38
+#define TCTRL4_RD_WR_TI_DLY	0x0000003f00000000UL
+#define TCTRL4_RD_WR_TI_DLY_SHIFT     32
+#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL
+#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27
+#define TCTRL4_WR_WR_TI_DLY	0x0000000007e00000UL
+#define TCTRL4_WR_WR_TI_DLY_SHIFT     21
+#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0
+#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL4_R		0x0000000000008000UL
+#define TCTRL4_R_SHIFT		      15
+#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* All 4 memory address decoding registers have the
+ * same layout.
+ */
+#define MEM_DECODE_VALID	0x8000000000000000UL /* Valid */
+#define MEM_DECODE_VALID_SHIFT	      63
+#define MEM_DECODE_UK		0x001ffe0000000000UL /* Upper mask */
+#define MEM_DECODE_UK_SHIFT	      41
+#define MEM_DECODE_UM		0x0000001ffff00000UL /* Upper match */
+#define MEM_DECODE_UM_SHIFT	      20
+#define MEM_DECODE_LK		0x000000000003c000UL /* Lower mask */
+#define MEM_DECODE_LK_SHIFT	      14
+#define MEM_DECODE_LM		0x0000000000000f00UL /* Lower match */
+#define MEM_DECODE_LM_SHIFT           8
+
+#define PA_UPPER_BITS		0x000007fffc000000UL
+#define PA_UPPER_BITS_SHIFT	26
+#define PA_LOWER_BITS		0x00000000000003c0UL
+#define PA_LOWER_BITS_SHIFT	6
+
+#define MACTRL_R0		         0x8000000000000000UL
+#define MACTRL_R0_SHIFT		         63
+#define MACTRL_ADDR_LE_PW                0x7000000000000000UL
+#define MACTRL_ADDR_LE_PW_SHIFT		 60
+#define MACTRL_CMD_PW                    0x0f00000000000000UL
+#define MACTRL_CMD_PW_SHIFT		 56
+#define MACTRL_HALF_MODE_WR_MSEL_DLY     0x00fc000000000000UL
+#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50
+#define MACTRL_HALF_MODE_RD_MSEL_DLY     0x0003f00000000000UL
+#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY   0x00000f0000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY   0x000000e000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37
+#define MACTRL_R1                        0x0000001000000000UL
+#define MACTRL_R1_SHIFT                      36
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32
+#define MACTRL_ENC_INTLV_B3              0x00000000f8000000UL
+#define MACTRL_ENC_INTLV_B3_SHIFT              27
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23
+#define MACTRL_ENC_INTLV_B2              0x00000000007c0000UL
+#define MACTRL_ENC_INTLV_B2_SHIFT              18
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14
+#define MACTRL_ENC_INTLV_B1              0x0000000000003e00UL
+#define MACTRL_ENC_INTLV_B1_SHIFT               9
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT  5
+#define MACTRL_ENC_INTLV_B0              0x000000000000001fUL
+#define MACTRL_ENC_INTLV_B0_SHIFT               0
+
+#endif /* _SPARC64_CHMCTRL_H */
diff --git a/arch/sparc/include/asm/clock.h b/arch/sparc/include/asm/clock.h
new file mode 100644
index 00000000000..2cf99dadec5
--- /dev/null
+++ b/arch/sparc/include/asm/clock.h
@@ -0,0 +1,11 @@
+/*
+ * clock.h:  Definitions for clock operations on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_CLOCK_H
+#define _SPARC_CLOCK_H
+
+/* Foo for now. */
+
+#endif /* !(_SPARC_CLOCK_H) */
diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h
new file mode 100644
index 00000000000..870db592857
--- /dev/null
+++ b/arch/sparc/include/asm/cmt.h
@@ -0,0 +1,59 @@
+#ifndef _SPARC64_CMT_H
+#define _SPARC64_CMT_H
+
+/* cmt.h: Chip Multi-Threading register definitions
+ *
+ * Copyright (C) 2004 David S. Miller (davem@redhat.com)
+ */
+
+/* ASI_CORE_ID - private */
+#define LP_ID		0x0000000000000010UL
+#define  LP_ID_MAX	0x00000000003f0000UL
+#define  LP_ID_ID	0x000000000000003fUL
+
+/* ASI_INTR_ID - private */
+#define LP_INTR_ID	0x0000000000000000UL
+#define  LP_INTR_ID_ID	0x00000000000003ffUL
+
+/* ASI_CESR_ID - private */
+#define CESR_ID		0x0000000000000040UL
+#define  CESR_ID_ID	0x00000000000000ffUL
+
+/* ASI_CORE_AVAILABLE - shared */
+#define LP_AVAIL	0x0000000000000000UL
+#define  LP_AVAIL_1	0x0000000000000002UL
+#define  LP_AVAIL_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE_STATUS - shared */
+#define LP_ENAB_STAT	0x0000000000000010UL
+#define  LP_ENAB_STAT_1	0x0000000000000002UL
+#define  LP_ENAB_STAT_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE - shared */
+#define LP_ENAB		0x0000000000000020UL
+#define  LP_ENAB_1	0x0000000000000002UL
+#define  LP_ENAB_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING - shared */
+#define LP_RUNNING_RW	0x0000000000000050UL
+#define LP_RUNNING_W1S	0x0000000000000060UL
+#define LP_RUNNING_W1C	0x0000000000000068UL
+#define  LP_RUNNING_1	0x0000000000000002UL
+#define  LP_RUNNING_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING_STAT - shared */
+#define LP_RUN_STAT	0x0000000000000058UL
+#define  LP_RUN_STAT_1	0x0000000000000002UL
+#define  LP_RUN_STAT_0	0x0000000000000001UL
+
+/* ASI_XIR_STEERING - shared */
+#define LP_XIR_STEER	0x0000000000000030UL
+#define  LP_XIR_STEER_1	0x0000000000000002UL
+#define  LP_XIR_STEER_0	0x0000000000000001UL
+
+/* ASI_CMT_ERROR_STEERING - shared */
+#define CMT_ER_STEER	0x0000000000000040UL
+#define  CMT_ER_STEER_1	0x0000000000000002UL
+#define  CMT_ER_STEER_0	0x0000000000000001UL
+
+#endif /* _SPARC64_CMT_H */
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
new file mode 100644
index 00000000000..f260b58f5ce
--- /dev/null
+++ b/arch/sparc/include/asm/compat.h
@@ -0,0 +1,243 @@
+#ifndef _ASM_SPARC64_COMPAT_H
+#define _ASM_SPARC64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_time_t	st_atime;
+	compat_ulong_t	st_atime_nsec;
+	compat_time_t	st_mtime;
+	compat_ulong_t	st_mtime_nsec;
+	compat_time_t	st_ctime;
+	compat_ulong_t	st_ctime_nsec;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	u32		__unused4[2];
+};
+
+struct compat_stat64 {
+	unsigned long long	st_dev;
+
+	unsigned long long	st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long	st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_INFINITY 0x7fffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current_thread_info()->kregs;
+	unsigned long usp = regs->u_regs[UREG_I6];
+
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp += STACK_BIAS;
+	else
+		usp &= 0xffffffffUL;
+
+	usp -= len;
+	usp &= ~0x7UL;
+
+	return (void __user *) usp;
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short __pad1;
+	compat_mode_t mode;
+	unsigned short __pad2;
+	unsigned short seq;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int	__pad1;
+	compat_time_t	sem_otime;
+	unsigned int	__pad2;
+	compat_time_t	sem_ctime;
+	u32		sem_nsems;
+	u32		__unused1;
+	u32		__unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int	__pad1;
+	compat_time_t	msg_stime;
+	unsigned int	__pad2;
+	compat_time_t	msg_rtime;
+	unsigned int	__pad3;
+	compat_time_t	msg_ctime;
+	unsigned int	msg_cbytes;
+	unsigned int	msg_qnum;
+	unsigned int	msg_qbytes;
+	compat_pid_t	msg_lspid;
+	compat_pid_t	msg_lrpid;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int	__pad1;
+	compat_time_t	shm_atime;
+	unsigned int	__pad2;
+	compat_time_t	shm_dtime;
+	unsigned int	__pad3;
+	compat_time_t	shm_ctime;
+	compat_size_t	shm_segsz;
+	compat_pid_t	shm_cpid;
+	compat_pid_t	shm_lpid;
+	unsigned int	shm_nattch;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_SPARC64_COMPAT_H */
diff --git a/arch/sparc/include/asm/compat_signal.h b/arch/sparc/include/asm/compat_signal.h
new file mode 100644
index 00000000000..b759eab9b51
--- /dev/null
+++ b/arch/sparc/include/asm/compat_signal.h
@@ -0,0 +1,29 @@
+#ifndef _COMPAT_SIGNAL_H
+#define _COMPAT_SIGNAL_H
+
+#include <linux/compat.h>
+#include <asm/signal.h>
+
+#ifdef CONFIG_COMPAT
+struct __new_sigaction32 {
+	unsigned		sa_handler;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+	compat_sigset_t 	sa_mask;
+};
+
+struct __old_sigaction32 {
+	unsigned		sa_handler;
+	compat_old_sigset_t  	sa_mask;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack32 {
+	u32			ss_sp;
+	int			ss_flags;
+	compat_size_t		ss_size;
+} stack_t32;
+#endif
+
+#endif /* !(_COMPAT_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/contregs.h b/arch/sparc/include/asm/contregs.h
new file mode 100644
index 00000000000..48fa8a4ef35
--- /dev/null
+++ b/arch/sparc/include/asm/contregs.h
@@ -0,0 +1,53 @@
+#ifndef _SPARC_CONTREGS_H
+#define _SPARC_CONTREGS_H
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
+#endif /* _SPARC_CONTREGS_H */
diff --git a/arch/sparc/include/asm/cpudata.h b/arch/sparc/include/asm/cpudata.h
new file mode 100644
index 00000000000..b5976de7cac
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CPUDATA_H
+#define ___ASM_SPARC_CPUDATA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cpudata_64.h>
+#else
+#include <asm/cpudata_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cpudata_32.h b/arch/sparc/include/asm/cpudata_32.h
new file mode 100644
index 00000000000..31d48a0e32c
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_32.h
@@ -0,0 +1,27 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
+ *
+ * Based on include/asm/cpudata.h and Linux 2.4 smp.h
+ * both (C) David S. Miller.
+ */
+
+#ifndef _SPARC_CPUDATA_H
+#define _SPARC_CPUDATA_H
+
+#include <linux/percpu.h>
+
+typedef struct {
+	unsigned long udelay_val;
+	unsigned long clock_tick;
+	unsigned int multiplier;
+	unsigned int counter;
+	int prom_node;
+	int mid;
+	int next;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
+
+#endif /* _SPARC_CPUDATA_H */
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
new file mode 100644
index 00000000000..532975ecfe1
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -0,0 +1,240 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_CPUDATA_H
+#define _SPARC64_CPUDATA_H
+
+#include <asm/hypervisor.h>
+#include <asm/asi.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/percpu.h>
+#include <linux/threads.h>
+
+typedef struct {
+	/* Dcache line 1 */
+	unsigned int	__softirq_pending; /* must be 1st, see rtrap.S */
+	unsigned int	__pad0;
+	unsigned long	clock_tick;	/* %tick's per second */
+	unsigned long	__pad;
+	unsigned int	__pad1;
+	unsigned int	__pad2;
+
+	/* Dcache line 2, rarely used */
+	unsigned int	dcache_size;
+	unsigned int	dcache_line_size;
+	unsigned int	icache_size;
+	unsigned int	icache_line_size;
+	unsigned int	ecache_size;
+	unsigned int	ecache_line_size;
+	int		core_id;
+	int		proc_id;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu)		per_cpu(__cpu_data, (__cpu))
+#define local_cpu_data()	__get_cpu_var(__cpu_data)
+
+/* Trap handling code needs to get at a few critical values upon
+ * trap entry and to process TSB misses.  These cannot be in the
+ * per_cpu() area as we really need to lock them into the TLB and
+ * thus make them part of the main kernel image.  As a result we
+ * try to make this as small as possible.
+ *
+ * This is padded out and aligned to 64-bytes to avoid false sharing
+ * on SMP.
+ */
+
+/* If you modify the size of this structure, please update
+ * TRAP_BLOCK_SZ_SHIFT below.
+ */
+struct thread_info;
+struct trap_per_cpu {
+/* D-cache line 1: Basic thread information, cpu and device mondo queues */
+	struct thread_info	*thread;
+	unsigned long		pgd_paddr;
+	unsigned long		cpu_mondo_pa;
+	unsigned long		dev_mondo_pa;
+
+/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
+	unsigned long		resum_mondo_pa;
+	unsigned long		resum_kernel_buf_pa;
+	unsigned long		nonresum_mondo_pa;
+	unsigned long		nonresum_kernel_buf_pa;
+
+/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
+	struct hv_fault_status	fault_info;
+
+/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
+	unsigned long		cpu_mondo_block_pa;
+	unsigned long		cpu_list_pa;
+	unsigned long		tsb_huge;
+	unsigned long		tsb_huge_temp;
+
+/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
+	unsigned long		irq_worklist_pa;
+	unsigned int		cpu_mondo_qmask;
+	unsigned int		dev_mondo_qmask;
+	unsigned int		resum_qmask;
+	unsigned int		nonresum_qmask;
+	void			*hdesc;
+} __attribute__((aligned(64)));
+extern struct trap_per_cpu trap_block[NR_CPUS];
+extern void init_cur_cpu_trap(struct thread_info *);
+extern void setup_tba(void);
+extern int ncpus_probed;
+extern void __init cpu_probe(void);
+extern const struct seq_operations cpuinfo_op;
+
+extern unsigned long real_hard_smp_processor_id(void);
+
+struct cpuid_patch_entry {
+	unsigned int	addr;
+	unsigned int	cheetah_safari[4];
+	unsigned int	cheetah_jbus[4];
+	unsigned int	starfire[4];
+	unsigned int	sun4v[4];
+};
+extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
+
+struct sun4v_1insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
+	__sun4v_1insn_patch_end;
+
+struct sun4v_2insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insns[2];
+};
+extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
+	__sun4v_2insn_patch_end;
+
+#endif /* !(__ASSEMBLY__) */
+
+#define TRAP_PER_CPU_THREAD		0x00
+#define TRAP_PER_CPU_PGD_PADDR		0x08
+#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
+#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
+#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
+#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
+#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
+#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
+#define TRAP_PER_CPU_FAULT_INFO		0x40
+#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
+#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
+#define TRAP_PER_CPU_TSB_HUGE		0xd0
+#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
+#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
+#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
+#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
+#define TRAP_PER_CPU_RESUM_QMASK	0xf0
+#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
+
+#define TRAP_BLOCK_SZ_SHIFT		8
+
+#include <asm/scratchpad.h>
+
+#define __GET_CPUID(REG)				\
+	/* Spitfire implementation (default). */	\
+661:	ldxa		[%g0] ASI_UPA_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	 and		REG, 0x1f, REG;			\
+	nop;						\
+	.section	.cpuid_patch, "ax";		\
+	/* Instruction location. */			\
+	.word		661b;				\
+	/* Cheetah Safari implementation. */		\
+	ldxa		[%g0] ASI_SAFARI_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x3ff, REG;		\
+	nop;						\
+	/* Cheetah JBUS implementation. */		\
+	ldxa		[%g0] ASI_JBUS_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x1f, REG;			\
+	nop;						\
+	/* Starfire implementation. */			\
+	sethi		%hi(0x1fff40000d0 >> 9), REG;	\
+	sllx		REG, 9, REG;			\
+	or		REG, 0xd0, REG;			\
+	lduwa		[REG] ASI_PHYS_BYPASS_EC_E, REG;\
+	/* sun4v implementation. */			\
+	mov		SCRATCHPAD_CPUID, REG;		\
+	ldxa		[REG] ASI_SCRATCHPAD, REG;	\
+	nop;						\
+	nop;						\
+	.previous;
+
+#ifdef CONFIG_SMP
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	__GET_CPUID(TMP)			\
+	sethi	%hi(trap_block), DEST;		\
+	sllx	TMP, TRAP_BLOCK_SZ_SHIFT, TMP;	\
+	or	DEST, %lo(trap_block), DEST;	\
+	add	DEST, TMP, DEST;		\
+
+/* Clobbers TMP, current address space PGD phys address into DEST.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+/* Clobbers TMP, loads DEST with current thread info pointer.  */
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* Given the current thread info pointer in THR, load the per-cpu
+ * area base of the current processor into DEST.  REG1, REG2, and REG3 are
+ * clobbered.
+ *
+ * You absolutely cannot use DEST as a temporary in this code.  The
+ * reason is that traps can happen during execution, and return from
+ * trap will load the fully resolved DEST per-cpu base.  This can corrupt
+ * the calculations done by the macro mid-stream.
+ */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)	\
+	lduh	[THR + TI_CPU], REG1;			\
+	sethi	%hi(__per_cpu_shift), REG3;		\
+	sethi	%hi(__per_cpu_base), REG2;		\
+	ldx	[REG3 + %lo(__per_cpu_shift)], REG3;	\
+	ldx	[REG2 + %lo(__per_cpu_base)], REG2;	\
+	sllx	REG1, REG3, REG3;			\
+	add	REG3, REG2, DEST;
+
+#else
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	sethi	%hi(trap_block), DEST;		\
+	or	DEST, %lo(trap_block), DEST;	\
+
+/* Uniprocessor versions, we know the cpuid is zero.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* _SPARC64_CPUDATA_H */
diff --git a/arch/sparc/include/asm/cputime.h b/arch/sparc/include/asm/cputime.h
new file mode 100644
index 00000000000..1a642b81e01
--- /dev/null
+++ b/arch/sparc/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_CPUTIME_H
+#define __SPARC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SPARC_CPUTIME_H */
diff --git a/arch/sparc/include/asm/current.h b/arch/sparc/include/asm/current.h
new file mode 100644
index 00000000000..10a0df55a57
--- /dev/null
+++ b/arch/sparc/include/asm/current.h
@@ -0,0 +1,34 @@
+/* include/asm/current.h
+ *
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ *
+ *  Derived from "include/asm-s390/current.h" by
+ *  Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *  Derived from "include/asm-i386/current.h"
+*/
+#ifndef _SPARC_CURRENT_H
+#define _SPARC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#ifdef CONFIG_SPARC64
+register struct task_struct *current asm("g4");
+#endif
+
+#ifdef CONFIG_SPARC32
+/* We might want to consider using %g4 like sparc64 to shave a few cycles.
+ *
+ * Two stage process (inline + #define) for type-checking.
+ * We also obfuscate get_current() to check if anyone used that by mistake.
+ */
+struct task_struct;
+static inline struct task_struct *__get_current(void)
+{
+	return current_thread_info()->task;
+}
+#define current __get_current()
+#endif
+
+#endif /* !(_SPARC_CURRENT_H) */
diff --git a/arch/sparc/include/asm/cypress.h b/arch/sparc/include/asm/cypress.h
new file mode 100644
index 00000000000..95e9772ea39
--- /dev/null
+++ b/arch/sparc/include/asm/cypress.h
@@ -0,0 +1,79 @@
+/*
+ * cypress.h: Cypress module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CYPRESS_H
+#define _SPARC_CYPRESS_H
+
+/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */
+
+/* The MMU control register fields on the Sparc Cypress 604/605 MMU's.
+ *
+ * ---------------------------------------------------------------
+ * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME|
+ * ---------------------------------------------------------------
+ *  31    24 23-22 21-20 19 18-15 14 13  12 11 10  9  8 7-2  1  0
+ *
+ * MCA: MultiChip Access -- Used for configuration of multiple
+ *      CY7C604/605 cache units.
+ * MCM: MultiChip Mask -- Again, for multiple cache unit config.
+ * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings.
+ * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only)
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ * C: Cacheable -- Indicates whether accesses are cacheable while
+ *    the MMU is off.  0=no 1=yes
+ * MR: MemoryReflection -- Indicates whether the bus attached to the
+ *     MBus supports memory reflection. 0=no 1=yes (605 only)
+ * CM: CacheMode -- Indicates whether the cache is operating in write
+ *     through or copy-back mode. 0=write-through 1=copy-back
+ * CL: CacheLock -- Indicates if the entire cache is locked or not.
+ *     0=not-locked 1=locked  (604 only)
+ * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes
+ * NF: NoFault -- Do faults generate traps? 0=yes 1=no
+ * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes
+ */
+
+#define CYPRESS_MCA       0x00c00000
+#define CYPRESS_MCM       0x00300000
+#define CYPRESS_MVALID    0x00080000
+#define CYPRESS_MIDMASK   0x00078000   /* Only on 605 */
+#define CYPRESS_BMODE     0x00004000
+#define CYPRESS_ACENABLE  0x00002000
+#define CYPRESS_MRFLCT    0x00000800   /* Only on 605 */
+#define CYPRESS_CMODE     0x00000400
+#define CYPRESS_CLOCK     0x00000200   /* Only on 604 */
+#define CYPRESS_CENABLE   0x00000100
+#define CYPRESS_NFAULT    0x00000002
+#define CYPRESS_MENABLE   0x00000001
+
+static inline void cypress_flush_page(unsigned long page)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (page), "i" (ASI_M_FLUSH_PAGE));
+}
+
+static inline void cypress_flush_segment(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_SEG));
+}
+
+static inline void cypress_flush_region(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_REGION));
+}
+
+static inline void cypress_flush_context(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+			     "i" (ASI_M_FLUSH_CTX));
+}
+
+/* XXX Displacement flushes for buggy chips and initial testing
+ * XXX go here.
+ */
+
+#endif /* !(_SPARC_CYPRESS_H) */
diff --git a/arch/sparc/include/asm/dcr.h b/arch/sparc/include/asm/dcr.h
new file mode 100644
index 00000000000..620c9ba642e
--- /dev/null
+++ b/arch/sparc/include/asm/dcr.h
@@ -0,0 +1,14 @@
+#ifndef _SPARC64_DCR_H
+#define _SPARC64_DCR_H
+
+/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */
+#define DCR_DPE		0x0000000000001000 /* III+: D$ Parity Error Enable	*/
+#define DCR_OBS		0x0000000000000fc0 /* Observability Bus Controls	*/
+#define DCR_BPE		0x0000000000000020 /* Branch Predict Enable		*/
+#define DCR_RPE		0x0000000000000010 /* Return Address Prediction Enable	*/
+#define DCR_SI		0x0000000000000008 /* Single Instruction Disable	*/
+#define DCR_IPE		0x0000000000000004 /* III+: I$ Parity Error Enable	*/
+#define DCR_IFPOE	0x0000000000000002 /* IRQ FP Operation Enable		*/
+#define DCR_MS		0x0000000000000001 /* Multi-Scalar dispatch		*/
+
+#endif /* _SPARC64_DCR_H */
diff --git a/arch/sparc/include/asm/dcu.h b/arch/sparc/include/asm/dcu.h
new file mode 100644
index 00000000000..0f704e106a1
--- /dev/null
+++ b/arch/sparc/include/asm/dcu.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_DCU_H
+#define _SPARC64_DCU_H
+
+#include <linux/const.h>
+
+/* UltraSparc-III Data Cache Unit Control Register */
+#define DCU_CP	_AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu	*/
+#define DCU_CV	_AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu	*/
+#define DCU_ME	_AC(0x0000800000000000,UL) /* NC-store Merging Enable	*/
+#define DCU_RE	_AC(0x0000400000000000,UL) /* RAW bypass Enable		*/
+#define DCU_PE	_AC(0x0000200000000000,UL) /* PCache Enable		*/
+#define DCU_HPE	_AC(0x0000100000000000,UL) /* HW prefetch Enable	*/
+#define DCU_SPE	_AC(0x0000080000000000,UL) /* SW prefetch Enable	*/
+#define DCU_SL	_AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
+#define DCU_WE	_AC(0x0000020000000000,UL) /* WCache enable		*/
+#define DCU_PM	_AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask	*/
+#define DCU_VM	_AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask	*/
+#define DCU_PR	_AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable	*/
+#define DCU_PW	_AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
+#define DCU_VR	_AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable	*/
+#define DCU_VW	_AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
+#define DCU_DM	_AC(0x0000000000000008,UL) /* DMMU Enable		*/
+#define DCU_IM	_AC(0x0000000000000004,UL) /* IMMU Enable		*/
+#define DCU_DC	_AC(0x0000000000000002,UL) /* Data Cache Enable		*/
+#define DCU_IC	_AC(0x0000000000000001,UL) /* Instruction Cache Enable	*/
+
+#endif /* _SPARC64_DCU_H */
diff --git a/arch/sparc/include/asm/delay.h b/arch/sparc/include/asm/delay.h
new file mode 100644
index 00000000000..467caa2a97a
--- /dev/null
+++ b/arch/sparc/include/asm/delay.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DELAY_H
+#define ___ASM_SPARC_DELAY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/delay_64.h>
+#else
+#include <asm/delay_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/delay_32.h b/arch/sparc/include/asm/delay_32.h
new file mode 100644
index 00000000000..bc9aba2bead
--- /dev/null
+++ b/arch/sparc/include/asm/delay_32.h
@@ -0,0 +1,34 @@
+/*
+ * delay.h: Linux delay routines on the Sparc.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
+ */
+
+#ifndef __SPARC_DELAY_H
+#define __SPARC_DELAY_H
+
+#include <asm/cpudata.h>
+
+static inline void __delay(unsigned long loops)
+{
+	__asm__ __volatile__("cmp %0, 0\n\t"
+			     "1: bne 1b\n\t"
+			     "subcc %0, 1, %0\n" :
+			     "=&r" (loops) :
+			     "0" (loops) :
+			     "cc");
+}
+
+/* This is too messy with inline asm on the Sparc. */
+extern void __udelay(unsigned long usecs, unsigned long lpj);
+extern void __ndelay(unsigned long nsecs, unsigned long lpj);
+
+#ifdef CONFIG_SMP
+#define __udelay_val	cpu_data(smp_processor_id()).udelay_val
+#else /* SMP */
+#define __udelay_val	loops_per_jiffy
+#endif /* SMP */
+#define udelay(__usecs)	__udelay(__usecs, __udelay_val)
+#define ndelay(__nsecs)	__ndelay(__nsecs, __udelay_val)
+
+#endif /* defined(__SPARC_DELAY_H) */
diff --git a/arch/sparc/include/asm/delay_64.h b/arch/sparc/include/asm/delay_64.h
new file mode 100644
index 00000000000..a77aa622d76
--- /dev/null
+++ b/arch/sparc/include/asm/delay_64.h
@@ -0,0 +1,17 @@
+/* delay.h: Linux delay routines on sparc64.
+ *
+ * Copyright (C) 1996, 2004, 2007 David S. Miller (davem@davemloft.net).
+ */
+
+#ifndef _SPARC64_DELAY_H
+#define _SPARC64_DELAY_H
+
+#ifndef __ASSEMBLY__
+
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
+#define mdelay(n)	udelay((n) * 1000)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_DELAY_H */
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
new file mode 100644
index 00000000000..19790eb99cc
--- /dev/null
+++ b/arch/sparc/include/asm/device.h
@@ -0,0 +1,23 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_SPARC_DEVICE_H
+#define _ASM_SPARC_DEVICE_H
+
+struct device_node;
+struct of_device;
+
+struct dev_archdata {
+	void			*iommu;
+	void			*stc;
+	void			*host_controller;
+
+	struct device_node	*prom_node;
+	struct of_device	*op;
+
+	int			numa_node;
+};
+
+#endif /* _ASM_SPARC_DEVICE_H */
diff --git a/arch/sparc/include/asm/display7seg.h b/arch/sparc/include/asm/display7seg.h
new file mode 100644
index 00000000000..86d4a901df2
--- /dev/null
+++ b/arch/sparc/include/asm/display7seg.h
@@ -0,0 +1,79 @@
+/*
+ *
+ * display7seg - Driver interface for the 7-segment display
+ * present on Sun Microsystems CP1400 and CP1500
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef __display7seg_h__
+#define __display7seg_h__
+
+#define D7S_IOC	'p'
+
+#define D7SIOCRD _IOR(D7S_IOC, 0x45, int)	/* Read device state	*/
+#define D7SIOCWR _IOW(D7S_IOC, 0x46, int)	/* Write device state	*/
+#define D7SIOCTM _IO (D7S_IOC, 0x47)		/* Translate mode (FLIP)*/
+
+/*
+ * ioctl flag definitions
+ *
+ * POINT	- Toggle decimal point	(0=absent 1=present)
+ * ALARM	- Toggle alarm LED 		(0=green  1=red)
+ * FLIP		- Toggle inverted mode 	(0=normal 1=flipped)
+ * bits 0-4	- Character displayed	(see definitions below)
+ *
+ * Display segments are defined as follows,
+ * subject to D7S_FLIP register state:
+ *
+ *    a
+ *   ---
+ * f|   |b
+ *   -g-
+ * e|   |c
+ *   ---
+ *    d
+ */
+
+#define D7S_POINT	(1 << 7)	/* Decimal point*/
+#define D7S_ALARM	(1 << 6)	/* Alarm LED 	*/
+#define D7S_FLIP	(1 << 5)	/* Flip display */
+
+#define D7S_0		0x00		/* Numerals 0-9 */
+#define D7S_1		0x01
+#define D7S_2		0x02
+#define D7S_3		0x03
+#define D7S_4		0x04
+#define D7S_5		0x05
+#define D7S_6		0x06
+#define D7S_7		0x07
+#define D7S_8		0x08
+#define D7S_9		0x09
+#define D7S_A		0x0A		/* Letters A-F, H, L, P */
+#define D7S_B		0x0B
+#define D7S_C		0x0C
+#define D7S_D		0x0D
+#define D7S_E		0x0E
+#define D7S_F		0x0F
+#define D7S_H		0x10
+#define D7S_E2		0x11
+#define D7S_L		0x12
+#define D7S_P		0x13
+#define D7S_SEGA	0x14		/* Individual segments */
+#define D7S_SEGB	0x15
+#define D7S_SEGC	0x16
+#define D7S_SEGD	0x17
+#define D7S_SEGE	0x18
+#define D7S_SEGF	0x19
+#define D7S_SEGG	0x1A
+#define D7S_SEGABFG 0x1B		/* Segment groupings */
+#define D7S_SEGCDEG	0x1C
+#define D7S_SEGBCEF 0x1D
+#define D7S_SEGADG	0x1E
+#define D7S_BLANK	0x1F		/* Clear all segments */
+
+#define D7S_MIN_VAL	0x0
+#define D7S_MAX_VAL	0x1F
+
+#endif /* ifndef __display7seg_h__ */
diff --git a/arch/sparc/include/asm/div64.h b/arch/sparc/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/sparc/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..0f4150e2661
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_MAPPING_H
+#define ___ASM_SPARC_DMA_MAPPING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma-mapping_64.h>
+#else
+#include <asm/dma-mapping_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
new file mode 100644
index 00000000000..f3a641e6b2c
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_SPARC_DMA_MAPPING_H
+#define _ASM_SPARC_DMA_MAPPING_H
+
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif /* PCI */
+
+#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h
new file mode 100644
index 00000000000..bfa64f9702d
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping_64.h
@@ -0,0 +1,154 @@
+#ifndef _ASM_SPARC64_DMA_MAPPING_H
+#define _ASM_SPARC64_DMA_MAPPING_H
+
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
+
+struct dma_ops {
+	void *(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void (*free_coherent)(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t dma_handle);
+	dma_addr_t (*map_single)(struct device *dev, void *cpu_addr,
+				 size_t size,
+				 enum dma_data_direction direction);
+	void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+			     size_t size,
+			     enum dma_data_direction direction);
+	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction direction);
+	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
+			 int nhwentries,
+			 enum dma_data_direction direction);
+	void (*sync_single_for_cpu)(struct device *dev,
+				    dma_addr_t dma_handle, size_t size,
+				    enum dma_data_direction direction);
+	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
+				int nelems,
+				enum dma_data_direction direction);
+};
+extern const struct dma_ops *dma_ops;
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_ops->map_single(dev, cpu_addr, size, direction);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_ops->unmap_single(dev, dma_addr, size, direction);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_ops->map_single(dev, page_address(page) + offset,
+				   size, direction);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_ops->unmap_single(dev, dma_address, size, direction);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_ops->map_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction)
+{
+	dma_ops->unmap_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction direction)
+{
+	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction direction)
+{
+	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					  struct scatterlist *sg, int nelems,
+					  enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << INTERNODE_CACHE_SHIFT);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+#endif /* _ASM_SPARC64_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
new file mode 100644
index 00000000000..aa1d90ac04c
--- /dev/null
+++ b/arch/sparc/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_H
+#define ___ASM_SPARC_DMA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma_64.h>
+#else
+#include <asm/dma_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h
new file mode 100644
index 00000000000..cf7189c0079
--- /dev/null
+++ b/arch/sparc/include/asm/dma_32.h
@@ -0,0 +1,288 @@
+/* include/asm/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/vac-ops.h>  /* for invalidate's, etc. */
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+struct page;
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define MAX_DMA_ADDRESS  (~0UL)
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+	struct sbus_dma *next;
+	struct sbus_dev *sdev;
+	void __iomem *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	unsigned long addr;      /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#ifdef CONFIG_SUN4
+/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
+ * Or is rev0 present only on sun4 boxes? -jj */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
+#else
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#endif
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#if 0	/* P3 this stuff is inline in ledma.c:init_restart_ledma() */
+/* Pause until counter runs out or BIT isn't set in the DMA condition
+ * register.
+ */
+static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
+				       unsigned long bit)
+{
+	int ctr = 50000;   /* Let's find some bugs ;) */
+
+	/* Busy wait until the bit is not set any more */
+	while((regs->cond_reg&bit) && (ctr>0)) {
+		ctr--;
+		__delay(5);
+	}
+
+	/* Check for bogus outcome. */
+	if(!ctr)
+		panic("DMA timeout");
+}
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+	struct sparc_dma_registers *regs = dma->regs;                      \
+	/* Let the current FIFO drain itself */                            \
+	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
+	/* Reset the logic */                                              \
+	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
+	__delay(400);                         /* let the bits set ;) */    \
+	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
+	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
+	/* Enable FAST transfers if available */                           \
+	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
+	dma->running = 0;                                                  \
+} while(0)
+#endif
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
new file mode 100644
index 00000000000..46a8aecffc0
--- /dev/null
+++ b/arch/sparc/include/asm/dma_64.h
@@ -0,0 +1,205 @@
+/*
+ * include/asm/dma.h
+ *
+ * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC64_DMA_H
+#define _ASM_SPARC64_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+	struct sbus_dma *next;
+	struct sbus_dev *sdev;
+	void __iomem *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	u32 addr;                /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
+#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_OFF(__regs)		\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp &= ~DMA_ENABLE; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSOFF(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp &= ~DMA_INT_ENAB; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSON(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= DMA_INT_ENAB; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_PUNTFIFO(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= DMA_FIFO_INV; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_SETSTART(__regs, __addr)	\
+	sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
+#define DMA_BEGINDMA_W(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_BEGINDMA_R(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
+	tmp &= ~DMA_ST_WRITE; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h
new file mode 100644
index 00000000000..83a6d16c22e
--- /dev/null
+++ b/arch/sparc/include/asm/ebus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_EBUS_H
+#define ___ASM_SPARC_EBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ebus_64.h>
+#else
+#include <asm/ebus_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ebus_32.h b/arch/sparc/include/asm/ebus_32.h
new file mode 100644
index 00000000000..f91f0b267ce
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_32.h
@@ -0,0 +1,99 @@
+/*
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ *
+ * Adopted for sparc by V. Roganov and G. Raiko.
+ */
+
+#ifndef __SPARC_EBUS_H
+#define __SPARC_EBUS_H
+
+#ifndef _LINUX_IOPORT_H
+#include <linux/ioport.h>
+#endif
+#include <linux/of_device.h>
+#include <asm/oplib.h>
+#include <asm/prom.h>
+
+struct linux_ebus_child {
+	struct linux_ebus_child		*next;
+	struct linux_ebus_device	*parent;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus_device {
+	struct of_device		ofdev;
+	struct linux_ebus_device	*next;
+	struct linux_ebus_child		*children;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
+
+struct linux_ebus {
+	struct of_device		ofdev;
+	struct linux_ebus		*next;
+	struct linux_ebus_device	*devices;
+	struct linux_pbm_info		*parent;
+	struct pci_dev			*self;
+	struct device_node		*prom_node;
+};
+#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+
+struct linux_ebus_dma {
+	unsigned int dcsr;
+	unsigned int dacr;
+	unsigned int dbcr;
+};
+
+#define EBUS_DCSR_INT_PEND	0x00000001
+#define EBUS_DCSR_ERR_PEND	0x00000002
+#define EBUS_DCSR_DRAIN		0x00000004
+#define EBUS_DCSR_INT_EN	0x00000010
+#define EBUS_DCSR_RESET		0x00000080
+#define EBUS_DCSR_WRITE		0x00000100
+#define EBUS_DCSR_EN_DMA	0x00000200
+#define EBUS_DCSR_CYC_PEND	0x00000400
+#define EBUS_DCSR_DIAG_RD_DONE	0x00000800
+#define EBUS_DCSR_DIAG_WR_DONE	0x00001000
+#define EBUS_DCSR_EN_CNT	0x00002000
+#define EBUS_DCSR_TC		0x00004000
+#define EBUS_DCSR_DIS_CSR_DRN	0x00010000
+#define EBUS_DCSR_BURST_SZ_MASK	0x000c0000
+#define EBUS_DCSR_BURST_SZ_1	0x00080000
+#define EBUS_DCSR_BURST_SZ_4	0x00000000
+#define EBUS_DCSR_BURST_SZ_8	0x00040000
+#define EBUS_DCSR_BURST_SZ_16	0x000c0000
+#define EBUS_DCSR_DIAG_EN	0x00100000
+#define EBUS_DCSR_DIS_ERR_PEND	0x00400000
+#define EBUS_DCSR_TCI_DIS	0x00800000
+#define EBUS_DCSR_EN_NEXT	0x01000000
+#define EBUS_DCSR_DMA_ON	0x02000000
+#define EBUS_DCSR_A_LOADED	0x04000000
+#define EBUS_DCSR_NA_LOADED	0x08000000
+#define EBUS_DCSR_DEV_ID_MASK	0xf0000000
+
+extern struct linux_ebus		*ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)						\
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)					\
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC_EBUS_H) */
diff --git a/arch/sparc/include/asm/ebus_64.h b/arch/sparc/include/asm/ebus_64.h
new file mode 100644
index 00000000000..14c6a111f60
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_64.h
@@ -0,0 +1,95 @@
+/*
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __SPARC64_EBUS_H
+#define __SPARC64_EBUS_H
+
+#include <linux/of_device.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+
+struct linux_ebus_child {
+	struct linux_ebus_child		*next;
+	struct linux_ebus_device	*parent;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus_device {
+	struct of_device		ofdev;
+	struct linux_ebus_device	*next;
+	struct linux_ebus_child		*children;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
+
+struct linux_ebus {
+	struct of_device		ofdev;
+	struct linux_ebus		*next;
+	struct linux_ebus_device	*devices;
+	struct pci_dev			*self;
+	int				 index;
+	int				 is_rio;
+	struct device_node		*prom_node;
+};
+#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+
+struct ebus_dma_info {
+	spinlock_t	lock;
+	void __iomem	*regs;
+
+	unsigned int	flags;
+#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER		0x00000001
+#define EBUS_DMA_FLAG_TCI_DISABLE		0x00000002
+
+	/* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is
+	 * set.
+	 */
+	void (*callback)(struct ebus_dma_info *p, int event, void *cookie);
+	void *client_cookie;
+	unsigned int	irq;
+#define EBUS_DMA_EVENT_ERROR	1
+#define EBUS_DMA_EVENT_DMA	2
+#define EBUS_DMA_EVENT_DEVICE	4
+
+	unsigned char	name[64];
+};
+
+extern int ebus_dma_register(struct ebus_dma_info *p);
+extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on);
+extern void ebus_dma_unregister(struct ebus_dma_info *p);
+extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
+			    size_t len);
+extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
+extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
+extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
+extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
+
+extern struct linux_ebus		*ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)						\
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)					\
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC64_EBUS_H) */
diff --git a/arch/sparc/include/asm/ecc.h b/arch/sparc/include/asm/ecc.h
new file mode 100644
index 00000000000..ccb84b66fef
--- /dev/null
+++ b/arch/sparc/include/asm/ecc.h
@@ -0,0 +1,122 @@
+/*
+ * ecc.h: Definitions and defines for the external cache/memory
+ *        controller on the sun4m.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ECC_H
+#define _SPARC_ECC_H
+
+/* These registers are accessed through the SRMMU passthrough ASI 0x20 */
+#define ECC_ENABLE     0x00000000       /* ECC enable register */
+#define ECC_FSTATUS    0x00000008       /* ECC fault status register */
+#define ECC_FADDR      0x00000010       /* ECC fault address register */
+#define ECC_DIGNOSTIC  0x00000018       /* ECC diagnostics register */
+#define ECC_MBAENAB    0x00000020       /* MBus arbiter enable register */
+#define ECC_DMESG      0x00001000       /* Diagnostic message passing area */
+
+/* ECC MBus Arbiter Enable register:
+ *
+ * ----------------------------------------
+ * |              |SBUS|MOD3|MOD2|MOD1|RSV|
+ * ----------------------------------------
+ *  31           5   4   3    2    1    0
+ *
+ * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on
+ * MOD3: Enable MBus Arbiter on MBus module 3  0=off 1=on
+ * MOD2: Enable MBus Arbiter on MBus module 2  0=off 1=on
+ * MOD1: Enable MBus Arbiter on MBus module 1  0=off 1=on
+ */
+
+#define ECC_MBAE_SBUS     0x00000010
+#define ECC_MBAE_MOD3     0x00000008
+#define ECC_MBAE_MOD2     0x00000004
+#define ECC_MBAE_MOD1     0x00000002 
+
+/* ECC Fault Control Register layout:
+ *
+ * -----------------------------
+ * |    RESV   | ECHECK | EINT |
+ * -----------------------------
+ *  31        2     1       0
+ *
+ * ECHECK:  Enable ECC checking.  0=off 1=on
+ * EINT:  Enable Interrupts for correctable errors. 0=off 1=on
+ */ 
+#define ECC_FCR_CHECK    0x00000002
+#define ECC_FCR_INTENAB  0x00000001
+
+/* ECC Fault Address Register Zero layout:
+ *
+ * -----------------------------------------------------
+ * | MID | S | RSV |  VA   | BM |AT| C| SZ |TYP| PADDR |
+ * -----------------------------------------------------
+ *  31-28  27 26-22  21-14   13  12 11 10-8 7-4   3-0
+ *
+ * MID: ModuleID of the faulting processor. ie. who did it?
+ * S: Supervisor/Privileged access? 0=no 1=yes
+ * VA: Bits 19-12 of the virtual faulting address, these are the
+ *     superset bits in the virtual cache and can be used for
+ *     a flush operation if necessary.
+ * BM: Boot mode? 0=no 1=yes  This is just like the SRMMU boot
+ *     mode bit.
+ * AT: Did this fault happen during an atomic instruction? 0=no
+ *     1=yes.  This means either an 'ldstub' or 'swap' instruction
+ *     was in progress (but not finished) when this fault happened.
+ *     This indicated whether the bus was locked when the fault
+ *     occurred.
+ * C: Did the pte for this access indicate that it was cacheable?
+ *    0=no 1=yes
+ * SZ: The size of the transaction.
+ * TYP: The transaction type.
+ * PADDR: Bits 35-32 of the physical address for the fault.
+ */
+#define ECC_FADDR0_MIDMASK   0xf0000000
+#define ECC_FADDR0_S         0x08000000
+#define ECC_FADDR0_VADDR     0x003fc000
+#define ECC_FADDR0_BMODE     0x00002000
+#define ECC_FADDR0_ATOMIC    0x00001000
+#define ECC_FADDR0_CACHE     0x00000800
+#define ECC_FADDR0_SIZE      0x00000700
+#define ECC_FADDR0_TYPE      0x000000f0
+#define ECC_FADDR0_PADDR     0x0000000f
+
+/* ECC Fault Address Register One layout:
+ *
+ * -------------------------------------
+ * |          Physical Address 31-0    |
+ * -------------------------------------
+ *  31                               0
+ *
+ * You get the upper 4 bits of the physical address from the
+ * PADDR field in ECC Fault Address Zero register.
+ */
+
+/* ECC Fault Status Register layout:
+ *
+ * ----------------------------------------------
+ * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C|
+ * ----------------------------------------------
+ *  31-18  17  16    15-8    7-4   3    2    1 0
+ *
+ * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only)
+ * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes)
+ * SYNDROME: Controller is mentally unstable.
+ * DWORD:
+ * UNC: Uncorrectable error.  0=no 1=yes
+ * TIMEO: Timeout occurred. 0=no 1=yes
+ * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only)
+ * C: Correctable error? 0=no 1=yes
+ */
+
+#define ECC_FSR_C2ERR    0x00020000
+#define ECC_FSR_MULT     0x00010000
+#define ECC_FSR_SYND     0x0000ff00
+#define ECC_FSR_DWORD    0x000000f0
+#define ECC_FSR_UNC      0x00000008
+#define ECC_FSR_TIMEO    0x00000004
+#define ECC_FSR_BADSLOT  0x00000002
+#define ECC_FSR_C        0x00000001
+
+#endif /* !(_SPARC_ECC_H) */
diff --git a/arch/sparc/include/asm/eeprom.h b/arch/sparc/include/asm/eeprom.h
new file mode 100644
index 00000000000..e17beeceb40
--- /dev/null
+++ b/arch/sparc/include/asm/eeprom.h
@@ -0,0 +1,9 @@
+/*
+ * eeprom.h:  Definitions for the Sun eeprom.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* The EEPROM and the Mostek Mk48t02 use the same IO address space
+ * for their registers/data areas.  The IDPROM lives here too.
+ */
diff --git a/arch/sparc/include/asm/elf.h b/arch/sparc/include/asm/elf.h
new file mode 100644
index 00000000000..0a2816c50b0
--- /dev/null
+++ b/arch/sparc/include/asm/elf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ELF_H
+#define ___ASM_SPARC_ELF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/elf_64.h>
+#else
+#include <asm/elf_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/elf_32.h b/arch/sparc/include/asm/elf_32.h
new file mode 100644
index 00000000000..d043f80bc2f
--- /dev/null
+++ b/arch/sparc/include/asm/elf_32.h
@@ -0,0 +1,145 @@
+#ifndef __ASMSPARC_ELF_H
+#define __ASMSPARC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER		13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define	R_SPARC_NONE		0
+#define	R_SPARC_8		1
+#define	R_SPARC_16		2
+#define	R_SPARC_32		3
+#define	R_SPARC_DISP8		4
+#define	R_SPARC_DISP16		5
+#define	R_SPARC_DISP32		6
+#define	R_SPARC_WDISP30		7
+#define	R_SPARC_WDISP22		8
+#define	R_SPARC_HI22		9
+#define	R_SPARC_22		10
+#define	R_SPARC_13		11
+#define	R_SPARC_LO10		12
+#define	R_SPARC_GOT10		13
+#define	R_SPARC_GOT13		14
+#define	R_SPARC_GOT22		15
+#define	R_SPARC_PC10		16
+#define	R_SPARC_PC22		17
+#define	R_SPARC_WPLT30		18
+#define	R_SPARC_COPY		19
+#define	R_SPARC_GLOB_DAT	20
+#define	R_SPARC_JMP_SLOT	21
+#define	R_SPARC_RELATIVE	22
+#define	R_SPARC_UA32		23
+#define R_SPARC_PLT32		24
+#define R_SPARC_HIPLT22		25
+#define R_SPARC_LOPLT10		26
+#define R_SPARC_PCPLT32		27
+#define R_SPARC_PCPLT22		28
+#define R_SPARC_PCPLT10		29
+#define R_SPARC_10		30
+#define R_SPARC_11		31
+#define R_SPARC_64		32
+#define R_SPARC_OLO10		33
+#define R_SPARC_WDISP16		40
+#define R_SPARC_WDISP19		41
+#define R_SPARC_7		43
+#define R_SPARC_5		44
+#define R_SPARC_6		45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9		16
+#define HWCAP_SPARC_ULTRA3	32
+
+#define CORE_DUMP_USE_REGSET
+
+/* Format is:
+ * 	G0 --> G7
+ *	O0 --> O7
+ *	L0 --> L7
+ *	I0 --> I7
+ *	PSR, PC, nPC, Y, WIM, TBR
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 38
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct {
+	union {
+		unsigned long	pr_regs[32];
+		double		pr_dregs[16];
+	} pr_fr;
+	unsigned long __unused;
+	unsigned long	pr_fsr;
+	unsigned char	pr_qcnt;
+	unsigned char	pr_q_entrysize;
+	unsigned char	pr_en;
+	unsigned int	pr_q[64];
+} elf_fpregset_t;
+
+#include <asm/mbus.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_SPARC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH	EM_SPARC
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN4
+#define ELF_EXEC_PAGESIZE	4096
+#else
+#define ELF_EXEC_PAGESIZE	8192
+#endif
+
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (TASK_UNMAPPED_BASE)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This can NOT be done in userspace
+   on Sparc.  */
+
+/* Sun4c has none of the capabilities, most sun4m's have them all.
+ * XXX This is gross, set some global variable at boot time. -DaveM
+ */
+#define ELF_HWCAP	((ARCH_SUN4C_SUN4) ? 0 : \
+			 (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
+			  HWCAP_SPARC_SWAP | \
+			  ((srmmu_modtype != Cypress && \
+			    srmmu_modtype != Cypress_vE && \
+			    srmmu_modtype != Cypress_vD) ? \
+			   HWCAP_SPARC_MULDIV : 0)))
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM	(NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif /* !(__ASMSPARC_ELF_H) */
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
new file mode 100644
index 00000000000..0818a1308f4
--- /dev/null
+++ b/arch/sparc/include/asm/elf_64.h
@@ -0,0 +1,217 @@
+#ifndef __ASM_SPARC64_ELF_H
+#define __ASM_SPARC64_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/spitfire.h>
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER		13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define	R_SPARC_NONE		0
+#define	R_SPARC_8		1
+#define	R_SPARC_16		2
+#define	R_SPARC_32		3
+#define	R_SPARC_DISP8		4
+#define	R_SPARC_DISP16		5
+#define	R_SPARC_DISP32		6
+#define	R_SPARC_WDISP30		7
+#define	R_SPARC_WDISP22		8
+#define	R_SPARC_HI22		9
+#define	R_SPARC_22		10
+#define	R_SPARC_13		11
+#define	R_SPARC_LO10		12
+#define	R_SPARC_GOT10		13
+#define	R_SPARC_GOT13		14
+#define	R_SPARC_GOT22		15
+#define	R_SPARC_PC10		16
+#define	R_SPARC_PC22		17
+#define	R_SPARC_WPLT30		18
+#define	R_SPARC_COPY		19
+#define	R_SPARC_GLOB_DAT	20
+#define	R_SPARC_JMP_SLOT	21
+#define	R_SPARC_RELATIVE	22
+#define	R_SPARC_UA32		23
+#define R_SPARC_PLT32		24
+#define R_SPARC_HIPLT22		25
+#define R_SPARC_LOPLT10		26
+#define R_SPARC_PCPLT32		27
+#define R_SPARC_PCPLT22		28
+#define R_SPARC_PCPLT10		29
+#define R_SPARC_10		30
+#define R_SPARC_11		31
+#define R_SPARC_64		32
+#define R_SPARC_OLO10		33
+#define R_SPARC_WDISP16		40
+#define R_SPARC_WDISP19		41
+#define R_SPARC_7		43
+#define R_SPARC_5		44
+#define R_SPARC_6		45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9		16
+#define HWCAP_SPARC_ULTRA3	32
+#define HWCAP_SPARC_BLKINIT	64
+#define HWCAP_SPARC_N2		128
+
+#define CORE_DUMP_USE_REGSET
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH		EM_SPARCV9
+#define ELF_CLASS		ELFCLASS64
+#define ELF_DATA		ELFDATA2MSB
+
+/* Format of 64-bit elf_gregset_t is:
+ * 	G0 --> G7
+ * 	O0 --> O7
+ * 	L0 --> L7
+ * 	I0 --> I7
+ *	TSTATE
+ *	TPC
+ *	TNPC
+ *	Y
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 36
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct {
+	unsigned long	pr_regs[32];
+	unsigned long	pr_fsr;
+	unsigned long	pr_gsr;
+	unsigned long	pr_fprs;
+} elf_fpregset_t;
+
+/* Format of 32-bit elf_gregset_t is:
+ * 	G0 --> G7
+ *	O0 --> O7
+ *	L0 --> L7
+ *	I0 --> I7
+ *	PSR, PC, nPC, Y, WIM, TBR
+ */
+typedef unsigned int compat_elf_greg_t;
+#define COMPAT_ELF_NGREG 38
+typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
+
+typedef struct {
+	union {
+		unsigned int	pr_regs[32];
+		unsigned long	pr_dregs[16];
+	} pr_fr;
+	unsigned int __unused;
+	unsigned int	pr_fsr;
+	unsigned char	pr_qcnt;
+	unsigned char	pr_q_entrysize;
+	unsigned char	pr_en;
+	unsigned int	pr_q[64];
+} compat_elf_fpregset_t;
+
+/* UltraSparc extensions.  Still unused, but will be eventually.  */
+typedef struct {
+	unsigned int pr_type;
+	unsigned int pr_align;
+	union {
+		struct {
+			union {
+				unsigned int	pr_regs[32];
+				unsigned long	pr_dregs[16];
+				long double	pr_qregs[8];
+			} pr_xfr;
+		} pr_v8p;
+		unsigned int	pr_xfsr;
+		unsigned int	pr_fprs;
+		unsigned int	pr_xg[8];
+		unsigned int	pr_xo[8];
+		unsigned long	pr_tstate;
+		unsigned int	pr_filler[8];
+	} pr_un;
+} elf_xregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == ELF_ARCH)
+#define compat_elf_check_arch(x)	((x)->e_machine == EM_SPARC || \
+					 (x)->e_machine == EM_SPARC32PLUS)
+#define compat_start_thread		start_thread32
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE		0x0000010000000000UL
+#define COMPAT_ELF_ET_DYN_BASE	0x0000000070000000UL
+
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+/* On Ultra, we support all of the v8 capabilities. */
+static inline unsigned int sparc64_elf_hwcap(void)
+{
+	unsigned int cap = (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR |
+			    HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV |
+			    HWCAP_SPARC_V9);
+
+	if (tlb_type == cheetah || tlb_type == cheetah_plus)
+		cap |= HWCAP_SPARC_ULTRA3;
+	else if (tlb_type == hypervisor) {
+		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
+			cap |= HWCAP_SPARC_BLKINIT;
+		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
+			cap |= HWCAP_SPARC_N2;
+	}
+
+	return cap;
+}
+
+#define ELF_HWCAP	sparc64_elf_hwcap();
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM	(NULL)
+
+#define SET_PERSONALITY(ex, ibcs2)			\
+do {	unsigned long new_flags = current_thread_info()->flags; \
+	new_flags &= _TIF_32BIT;			\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
+		new_flags |= _TIF_32BIT;		\
+	else						\
+		new_flags &= ~_TIF_32BIT;		\
+	if ((current_thread_info()->flags & _TIF_32BIT) \
+	    != new_flags)				\
+		set_thread_flag(TIF_ABI_PENDING);	\
+	else						\
+		clear_thread_flag(TIF_ABI_PENDING);	\
+	/* flush_thread will update pgd cache */	\
+	if (ibcs2)					\
+		set_personality(PER_SVR4);		\
+	else if (current->personality != PER_LINUX32)	\
+		set_personality(PER_LINUX);		\
+} while (0)
+
+#endif /* !(__ASM_SPARC64_ELF_H) */
diff --git a/arch/sparc/include/asm/emergency-restart.h b/arch/sparc/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/sparc/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sparc/include/asm/envctrl.h b/arch/sparc/include/asm/envctrl.h
new file mode 100644
index 00000000000..624fa7e2da8
--- /dev/null
+++ b/arch/sparc/include/asm/envctrl.h
@@ -0,0 +1,103 @@
+/*
+ *
+ * envctrl.h: Definitions for access to the i2c environment
+ *            monitoring on Ultrasparc systems.
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ * Copyright (C) 2000  Vinh Truong  (vinh.truong@eng.sun.com)
+ * VT - Add all ioctl commands and environment status definitions
+ * VT - Add application note
+ */
+#ifndef _SPARC64_ENVCTRL_H
+#define _SPARC64_ENVCTRL_H 1
+
+#include <linux/ioctl.h>
+
+/* Application note:
+ *
+ * The driver supports 4 operations: open(), close(), ioctl(), read()
+ * The device name is /dev/envctrl.
+ * Below is sample usage:
+ *
+ *	fd = open("/dev/envtrl", O_RDONLY);
+ *	if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *	close(fd);
+ *
+ * Notice in the case of cpu voltage and temperature, the default is
+ * cpu0.  If we need to know the info of cpu1, cpu2, cpu3, we need to
+ * pass in cpu number in ioctl() last parameter.  For example, to
+ * get the voltage of cpu2:
+ *
+ *	ioctlbuf[0] = 2;
+ *	if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *
+ * All the return values are in ascii.  So check read return value
+ * and do appropriate conversions in your application.
+ */
+
+/* IOCTL commands */
+
+/* Note: these commands reflect possible monitor features.
+ * Some boards choose to support some of the features only.
+ */
+#define ENVCTRL_RD_CPU_TEMPERATURE	_IOR('p', 0x40, int)
+#define ENVCTRL_RD_CPU_VOLTAGE		_IOR('p', 0x41, int)
+#define ENVCTRL_RD_FAN_STATUS		_IOR('p', 0x42, int)
+#define ENVCTRL_RD_WARNING_TEMPERATURE	_IOR('p', 0x43, int)
+#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE	_IOR('p', 0x44, int)
+#define ENVCTRL_RD_VOLTAGE_STATUS	_IOR('p', 0x45, int)
+#define ENVCTRL_RD_SCSI_TEMPERATURE	_IOR('p', 0x46, int)
+#define ENVCTRL_RD_ETHERNET_TEMPERATURE	_IOR('p', 0x47, int)
+#define ENVCTRL_RD_MTHRBD_TEMPERATURE	_IOR('p', 0x48, int)
+
+#define ENVCTRL_RD_GLOBALADDRESS	_IOR('p', 0x49, int)
+
+/* Read return values for a voltage status request. */
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD	0x01
+#define ENVCTRL_VOLTAGE_BAD			0x02
+#define ENVCTRL_POWERSUPPLY_BAD			0x03
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD		0x04
+
+/* Read return values for a fan status request.
+ * A failure match means either the fan fails or
+ * the fan is not connected.  Some boards have optional
+ * connectors to connect extra fans.
+ *
+ * There are maximum 8 monitor fans.  Some are cpu fans
+ * some are system fans.  The mask below only indicates
+ * fan by order number.
+ * Below is a sample application:
+ *
+ *	if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
+ *		printf("ioctl fan failed\n");
+ *	}
+ *	if (read(fd, rslt, 1) <= 0) {
+ *		printf("error or fan not monitored\n");
+ *	} else {
+ *		if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
+ *			printf("all fans good\n");
+ *	} else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
+ *		printf("all fans bad\n");
+ *	} else {
+ *		if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
+ *			printf("fan 0 failed or not connected\n");
+ *	}
+ *	......
+ */
+
+#define ENVCTRL_ALL_FANS_GOOD			0x00
+#define ENVCTRL_FAN0_FAILURE_MASK		0x01
+#define ENVCTRL_FAN1_FAILURE_MASK		0x02
+#define ENVCTRL_FAN2_FAILURE_MASK		0x04
+#define ENVCTRL_FAN3_FAILURE_MASK		0x08
+#define ENVCTRL_FAN4_FAILURE_MASK		0x10
+#define ENVCTRL_FAN5_FAILURE_MASK		0x20
+#define ENVCTRL_FAN6_FAILURE_MASK		0x40
+#define ENVCTRL_FAN7_FAILURE_MASK		0x80
+#define ENVCTRL_ALL_FANS_BAD 			0xFF
+
+#endif /* !(_SPARC64_ENVCTRL_H) */
diff --git a/arch/sparc/include/asm/errno.h b/arch/sparc/include/asm/errno.h
new file mode 100644
index 00000000000..a9ef172977d
--- /dev/null
+++ b/arch/sparc/include/asm/errno.h
@@ -0,0 +1,113 @@
+#ifndef _SPARC_ERRNO_H
+#define _SPARC_ERRNO_H
+
+/* These match the SunOS error numbering scheme. */
+
+#include <asm-generic/errno-base.h>
+
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EINPROGRESS	36	/* Operation now in progress */
+#define	EALREADY	37	/* Operation already in progress */
+#define	ENOTSOCK	38	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39	/* Destination address required */
+#define	EMSGSIZE	40	/* Message too long */
+#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42	/* Protocol not available */
+#define	EPROTONOSUPPORT	43	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
+#define	EOPNOTSUPP	45	/* Op not supported on transport endpoint */
+#define	EPFNOSUPPORT	46	/* Protocol family not supported */
+#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
+#define	EADDRINUSE	48	/* Address already in use */
+#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
+#define	ENETDOWN	50	/* Network is down */
+#define	ENETUNREACH	51	/* Network is unreachable */
+#define	ENETRESET	52	/* Net dropped connection because of reset */
+#define	ECONNABORTED	53	/* Software caused connection abort */
+#define	ECONNRESET	54	/* Connection reset by peer */
+#define	ENOBUFS		55	/* No buffer space available */
+#define	EISCONN		56	/* Transport endpoint is already connected */
+#define	ENOTCONN	57	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	58	/* No send after transport endpoint shutdown */
+#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
+#define	ETIMEDOUT	60	/* Connection timed out */
+#define	ECONNREFUSED	61	/* Connection refused */
+#define	ELOOP		62	/* Too many symbolic links encountered */
+#define	ENAMETOOLONG	63	/* File name too long */
+#define	EHOSTDOWN	64	/* Host is down */
+#define	EHOSTUNREACH	65	/* No route to host */
+#define	ENOTEMPTY	66	/* Directory not empty */
+#define EPROCLIM        67      /* SUNOS: Too many processes */
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+#define	ENOSTR		72	/* Device not a stream */
+#define	ETIME		73	/* Timer expired */
+#define	ENOSR		74	/* Out of streams resources */
+#define	ENOMSG		75	/* No message of desired type */
+#define	EBADMSG		76	/* Not a data message */
+#define	EIDRM		77	/* Identifier removed */
+#define	EDEADLK		78	/* Resource deadlock would occur */
+#define	ENOLCK		79	/* No record locks available */
+#define	ENONET		80	/* Machine is not on the network */
+#define ERREMOTE        81      /* SunOS: Too many lvls of remote in path */
+#define	ENOLINK		82	/* Link has been severed */
+#define	EADV		83	/* Advertise error */
+#define	ESRMNT		84	/* Srmount error */
+#define	ECOMM		85      /* Communication error on send */
+#define	EPROTO		86	/* Protocol error */
+#define	EMULTIHOP	87	/* Multihop attempted */
+#define	EDOTDOT		88	/* RFS specific error */
+#define	EREMCHG		89	/* Remote address changed */
+#define	ENOSYS		90	/* Function not implemented */
+
+/* The rest have no SunOS equivalent. */
+#define	ESTRPIPE	91	/* Streams pipe error */
+#define	EOVERFLOW	92	/* Value too large for defined data type */
+#define	EBADFD		93	/* File descriptor in bad state */
+#define	ECHRNG		94	/* Channel number out of range */
+#define	EL2NSYNC	95	/* Level 2 not synchronized */
+#define	EL3HLT		96	/* Level 3 halted */
+#define	EL3RST		97	/* Level 3 reset */
+#define	ELNRNG		98	/* Link number out of range */
+#define	EUNATCH		99	/* Protocol driver not attached */
+#define	ENOCSI		100	/* No CSI structure available */
+#define	EL2HLT		101	/* Level 2 halted */
+#define	EBADE		102	/* Invalid exchange */
+#define	EBADR		103	/* Invalid request descriptor */
+#define	EXFULL		104	/* Exchange full */
+#define	ENOANO		105	/* No anode */
+#define	EBADRQC		106	/* Invalid request code */
+#define	EBADSLT		107	/* Invalid slot */
+#define	EDEADLOCK	108	/* File locking deadlock error */
+#define	EBFONT		109	/* Bad font file format */
+#define	ELIBEXEC	110	/* Cannot exec a shared library directly */
+#define	ENODATA		111	/* No data available */
+#define	ELIBBAD		112	/* Accessing a corrupted shared library */
+#define	ENOPKG		113	/* Package not installed */
+#define	ELIBACC		114	/* Can not access a needed shared library */
+#define	ENOTUNIQ	115	/* Name not unique on network */
+#define	ERESTART	116	/* Interrupted syscall should be restarted */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EILSEQ		122	/* Illegal byte sequence */
+#define	ELIBMAX		123	/* Atmpt to link in too many shared libs */
+#define	ELIBSCN		124	/* .lib section in a.out corrupted */
+
+#define	ENOMEDIUM	125	/* No medium found */
+#define	EMEDIUMTYPE	126	/* Wrong medium type */
+#define	ECANCELED	127	/* Operation Cancelled */
+#define	ENOKEY		128	/* Required key not available */
+#define	EKEYEXPIRED	129	/* Key has expired */
+#define	EKEYREVOKED	130	/* Key has been revoked */
+#define	EKEYREJECTED	131	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	132	/* Owner died */
+#define	ENOTRECOVERABLE	133	/* State not recoverable */
+
+#endif
diff --git a/arch/sparc/include/asm/estate.h b/arch/sparc/include/asm/estate.h
new file mode 100644
index 00000000000..520c08560d1
--- /dev/null
+++ b/arch/sparc/include/asm/estate.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_ESTATE_H
+#define _SPARC64_ESTATE_H
+
+/* UltraSPARC-III E-cache Error Enable */
+#define ESTATE_ERROR_FMT	0x0000000000040000 /* Force MTAG ECC		*/
+#define ESTATE_ERROR_FMESS	0x000000000003c000 /* Forced MTAG ECC val	*/
+#define ESTATE_ERROR_FMD	0x0000000000002000 /* Force DATA ECC		*/
+#define ESTATE_ERROR_FDECC	0x0000000000001ff0 /* Forced DATA ECC val	*/
+#define ESTATE_ERROR_UCEEN	0x0000000000000008 /* See below			*/
+#define ESTATE_ERROR_NCEEN	0x0000000000000002 /* See below			*/
+#define ESTATE_ERROR_CEEN	0x0000000000000001 /* See below			*/
+
+/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache
+ * errors 2) uncorrectable E-cache errors.  Such events only occur on reads
+ * of the E-cache by the local processor for: 1) data loads 2) instruction
+ * fetches 3) atomic operations.  Such events _cannot_ occur for: 1) merge
+ * 2) writeback 2) copyout.  The AFSR bits associated with these traps are
+ * UCC and UCU.
+ */
+
+/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps
+ * for uncorrectable ECC errors and system errors.
+ *
+ * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT,
+ * or system bus BusERR:
+ * 1) As the result of an instruction fetch, will generate instruction_access_error
+ * 2) As the result of a load etc. will generate data_access_error.
+ * 3) As the result of store merge completion, writeback, or copyout will
+ *    generate a disrupting ECC_error trap.
+ * 4) As the result of such errors on instruction vector fetch can generate any
+ *    of the 3 trap types.
+ *
+ * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
+ * BERR, and TO.
+ */
+
+/* CEEN enables the ECC_error trap for hardware corrected ECC errors.  System bus
+ * reads resulting in a hardware corrected data or MTAG ECC error will generate an
+ * ECC_error disrupting trap with this bit enabled.
+ *
+ * This same trap will also be generated when a hardware corrected ECC error results
+ * during store merge, writeback, and copyout operations.
+ */
+
+/* In general, if the trap enable bits above are disabled the AFSR bits will still
+ * log the events even though the trap will not be generated by the processor.
+ */
+
+#endif /* _SPARC64_ESTATE_H */
diff --git a/arch/sparc/include/asm/fb.h b/arch/sparc/include/asm/fb.h
new file mode 100644
index 00000000000..b83e4472965
--- /dev/null
+++ b/arch/sparc/include/asm/fb.h
@@ -0,0 +1,29 @@
+#ifndef _SPARC_FB_H_
+#define _SPARC_FB_H_
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+#ifdef CONFIG_SPARC64
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	struct device *dev = info->device;
+	struct device_node *node;
+
+	node = dev->archdata.prom_node;
+	if (node &&
+	    node == of_console_device)
+		return 1;
+
+	return 0;
+}
+
+#endif /* _SPARC_FB_H_ */
diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h
new file mode 100644
index 00000000000..b9215a0907d
--- /dev/null
+++ b/arch/sparc/include/asm/fbio.h
@@ -0,0 +1,330 @@
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682	23
+#define FBTYPE_P9100COLOR	24
+
+#define FBTYPE_PCI_GENERIC	1000
+#define FBTYPE_PCI_MACH64	1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;	/* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;	/* real frame buffer type */
+        int     owner;		/* unknown */
+        struct fbtype fbtype;	/* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8		0
+#define FB_WID_SHARED_24	1
+#define FB_WID_DBL_8		2
+#define FB_WID_DBL_24		3
+	__u32	wa_type;
+	__s32	wa_index;	/* Set on return */
+	__u32	wa_count;	
+};
+struct fb_wid_item {
+	__u32	wi_type;
+	__s32	wi_index;
+	__u32	wi_attrs;
+	__u32	wi_values[32];
+};
+struct fb_wid_list {
+	__u32	wl_flags;
+	__u32	wl_count;
+	struct fb_wid_item	*wl_list;
+};
+
+#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL	('F'<<8)
+#define FFB_SYS_INFO		(FFB_IOCTL|80)
+#define FFB_CLUTREAD		(FFB_IOCTL|81)
+#define FFB_CLUTPOST		(FFB_IOCTL|82)
+#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
+#define FFB_GETMONITORID	(FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
+#define FFB_SETSERVER		(FFB_IOCTL|87)
+#define FFB_SETOVCTL		(FFB_IOCTL|88)
+#define FFB_GETOVCTL		(FFB_IOCTL|89)
+#define FFB_GETSAXNUM		(FFB_IOCTL|90)
+#define FFB_FBDEBUG		(FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+	__u32	clutid;	/* Set on return */
+ 	__u32	flag;
+ 	__u32	index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	char *	red;
+ 	char *	green;
+ 	char *	blue;
+};
+
+struct fb_clut32 {
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	__u32	red;
+ 	__u32	green;
+ 	__u32	blue;
+};
+
+#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT   		0x00000000
+#define TCX_RAM24BIT   		0x01000000
+#define TCX_UNK3   		0x10000000
+#define TCX_UNK4   		0x20000000
+#define TCX_CONTROLPLANE   	0x28000000
+#define TCX_UNK6   		0x30000000
+#define TCX_UNK7   		0x38000000
+#define TCX_TEC    		0x70000000
+#define TCX_BTREGS 		0x70002000
+#define TCX_THC    		0x70004000
+#define TCX_DHC    		0x70008000
+#define TCX_ALT	   		0x7000a000
+#define TCX_SYNC   		0x7000e000
+#define TCX_UNK2    		0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO	 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#ifdef __KERNEL__
+struct  fbcmap32 {
+	int             index;          /* first element (0 origin) */
+	int             count;
+	u32		red;
+	u32		green;
+	u32		blue;
+};
+
+#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+	short set;		/* what to set, choose from the list above */
+	short enable;		/* cursor on/off */
+	struct fbcurpos pos;	/* cursor position */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fbcmap32 cmap;	/* color map info */
+	struct fbcurpos size;	/* cursor bit map size */
+	u32	image;		/* cursor image bits */
+	u32	mask;		/* cursor mask bits */
+};
+
+#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h
new file mode 100644
index 00000000000..d4d9c9d852c
--- /dev/null
+++ b/arch/sparc/include/asm/fcntl.h
@@ -0,0 +1,40 @@
+#ifndef _SPARC_FCNTL_H
+#define _SPARC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_APPEND	0x0008
+#define FASYNC		0x0040	/* fcntl, for BSD compatibility */
+#define O_CREAT		0x0200	/* not fcntl */
+#define O_TRUNC		0x0400	/* not fcntl */
+#define O_EXCL		0x0800	/* not fcntl */
+#define O_SYNC		0x2000
+#define O_NONBLOCK	0x4000
+#if defined(__sparc__) && defined(__arch64__)
+#define O_NDELAY	0x0004
+#else
+#define O_NDELAY	(0x0004 | O_NONBLOCK)
+#endif
+#define O_NOCTTY	0x8000	/* not fcntl */
+#define O_LARGEFILE	0x40000
+#define O_DIRECT        0x100000 /* direct disk access hint */
+#define O_NOATIME	0x200000
+#define O_CLOEXEC	0x400000
+
+#define F_GETOWN	5	/*  for sockets. */
+#define F_SETOWN	6	/*  for sockets. */
+#define F_GETLK		7
+#define F_SETLK		8
+#define F_SETLKW	9
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		1
+#define F_WRLCK		2
+#define F_UNLCK		3
+
+#define __ARCH_FLOCK_PAD	short __unused;
+#define __ARCH_FLOCK64_PAD	short __unused;
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/sparc/include/asm/fhc.h b/arch/sparc/include/asm/fhc.h
new file mode 100644
index 00000000000..788cbc46a11
--- /dev/null
+++ b/arch/sparc/include/asm/fhc.h
@@ -0,0 +1,121 @@
+/*
+ * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
+ *
+ * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_FHC_H
+#define _SPARC64_FHC_H
+
+#include <linux/timer.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/upa.h>
+
+struct linux_fhc;
+
+/* Clock board register offsets. */
+#define CLOCK_CTRL	0x00UL	/* Main control */
+#define CLOCK_STAT1	0x10UL	/* Status one */
+#define CLOCK_STAT2	0x20UL	/* Status two */
+#define CLOCK_PWRSTAT	0x30UL	/* Power status */
+#define CLOCK_PWRPRES	0x40UL	/* Power presence */
+#define CLOCK_TEMP	0x50UL	/* Temperature */
+#define CLOCK_IRQDIAG	0x60UL	/* IRQ diagnostics */
+#define CLOCK_PWRSTAT2	0x70UL	/* Power status two */
+
+#define CLOCK_CTRL_LLED		0x04	/* Left LED, 0 == on */
+#define CLOCK_CTRL_MLED		0x02	/* Mid LED, 1 == on */
+#define CLOCK_CTRL_RLED		0x01	/* RIght LED, 1 == on */
+
+struct linux_central {
+	struct linux_fhc		*child;
+	unsigned long			cfreg;
+	unsigned long			clkregs;
+	unsigned long			clkver;
+	int				slots;
+	struct device_node		*prom_node;
+
+	struct linux_prom_ranges	central_ranges[PROMREG_MAX];
+	int				num_central_ranges;
+};
+
+/* Firehose controller register offsets */
+struct fhc_regs {
+	unsigned long			pregs;	/* FHC internal regs */
+#define FHC_PREGS_ID	0x00UL	/* FHC ID */
+#define  FHC_ID_VERS		0xf0000000 /* Version of this FHC		*/
+#define  FHC_ID_PARTID		0x0ffff000 /* Part ID code (0x0f9f == FHC)	*/
+#define  FHC_ID_MANUF		0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/
+#define  FHC_ID_RESV		0x00000001 /* Read as one			*/
+#define FHC_PREGS_RCS	0x10UL	/* FHC Reset Control/Status Register */
+#define  FHC_RCS_POR		0x80000000 /* Last reset was a power cycle	*/
+#define  FHC_RCS_SPOR		0x40000000 /* Last reset was sw power on reset	*/
+#define  FHC_RCS_SXIR		0x20000000 /* Last reset was sw XIR reset	*/
+#define  FHC_RCS_BPOR		0x10000000 /* Last reset was due to POR button	*/
+#define  FHC_RCS_BXIR		0x08000000 /* Last reset was due to XIR button	*/
+#define  FHC_RCS_WEVENT		0x04000000 /* CPU reset was due to wakeup event	*/
+#define  FHC_RCS_CFATAL		0x02000000 /* Centerplane Fatal Error signalled	*/
+#define  FHC_RCS_FENAB		0x01000000 /* Fatal errors elicit system reset	*/
+#define FHC_PREGS_CTRL	0x20UL	/* FHC Control Register */
+#define  FHC_CONTROL_ICS	0x00100000 /* Ignore Centerplane Signals	*/
+#define  FHC_CONTROL_FRST	0x00080000 /* Fatal Error Reset Enable		*/
+#define  FHC_CONTROL_LFAT	0x00040000 /* AC/DC signalled a local error	*/
+#define  FHC_CONTROL_SLINE	0x00010000 /* Firmware Synchronization Line	*/
+#define  FHC_CONTROL_DCD	0x00008000 /* DC-->DC Converter Disable		*/
+#define  FHC_CONTROL_POFF	0x00004000 /* AC/DC Controller PLL Disable	*/
+#define  FHC_CONTROL_FOFF	0x00002000 /* FHC Controller PLL Disable	*/
+#define  FHC_CONTROL_AOFF	0x00001000 /* CPU A SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_BOFF	0x00000800 /* CPU B SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_PSOFF	0x00000400 /* Turns off this FHC's power supply	*/
+#define  FHC_CONTROL_IXIST	0x00000200 /* 0=FHC tells clock board it exists	*/
+#define  FHC_CONTROL_XMSTR	0x00000100 /* 1=Causes this FHC to be XIR master*/
+#define  FHC_CONTROL_LLED	0x00000040 /* 0=Left LED ON			*/
+#define  FHC_CONTROL_MLED	0x00000020 /* 1=Middle LED ON			*/
+#define  FHC_CONTROL_RLED	0x00000010 /* 1=Right LED			*/
+#define  FHC_CONTROL_BPINS	0x00000003 /* Spare Bidirectional Pins		*/
+#define FHC_PREGS_BSR	0x30UL	/* FHC Board Status Register */
+#define  FHC_BSR_DA64		0x00040000 /* Port A: 0=128bit 1=64bit data path */
+#define  FHC_BSR_DB64		0x00020000 /* Port B: 0=128bit 1=64bit data path */
+#define  FHC_BSR_BID		0x0001e000 /* Board ID                           */
+#define  FHC_BSR_SA		0x00001c00 /* Port A UPA Speed (from the pins)   */
+#define  FHC_BSR_SB		0x00000380 /* Port B UPA Speed (from the pins)   */
+#define  FHC_BSR_NDIAG		0x00000040 /* Not in Diag Mode                   */
+#define  FHC_BSR_NTBED		0x00000020 /* Not in TestBED Mode                */
+#define  FHC_BSR_NIA		0x0000001c /* Jumper, bit 18 in PROM space       */
+#define  FHC_BSR_SI		0x00000001 /* Spare input pin value              */
+#define FHC_PREGS_ECC	0x40UL	/* FHC ECC Control Register (16 bits) */
+#define FHC_PREGS_JCTRL	0xf0UL	/* FHC JTAG Control Register */
+#define  FHC_JTAG_CTRL_MENAB	0x80000000 /* Indicates this is JTAG Master	 */
+#define  FHC_JTAG_CTRL_MNONE	0x40000000 /* Indicates no JTAG Master present	 */
+#define FHC_PREGS_JCMD	0x100UL	/* FHC JTAG Command Register */
+	unsigned long			ireg;	/* FHC IGN reg */
+#define FHC_IREG_IGN	0x00UL	/* This FHC's IGN */
+	unsigned long			ffregs;	/* FHC fanfail regs */
+#define FHC_FFREGS_IMAP	0x00UL	/* FHC Fanfail IMAP */
+#define FHC_FFREGS_ICLR	0x10UL	/* FHC Fanfail ICLR */
+	unsigned long			sregs;	/* FHC system regs */
+#define FHC_SREGS_IMAP	0x00UL	/* FHC System IMAP */
+#define FHC_SREGS_ICLR	0x10UL	/* FHC System ICLR */
+	unsigned long			uregs;	/* FHC uart regs */
+#define FHC_UREGS_IMAP	0x00UL	/* FHC Uart IMAP */
+#define FHC_UREGS_ICLR	0x10UL	/* FHC Uart ICLR */
+	unsigned long			tregs;	/* FHC TOD regs */
+#define FHC_TREGS_IMAP	0x00UL	/* FHC TOD IMAP */
+#define FHC_TREGS_ICLR	0x10UL	/* FHC TOD ICLR */
+};
+
+struct linux_fhc {
+	struct linux_fhc		*next;
+	struct linux_central		*parent;	/* NULL if not central FHC */
+	struct fhc_regs			fhc_regs;
+	int				board;
+	int				jtag_master;
+	struct device_node		*prom_node;
+
+	struct linux_prom_ranges	fhc_ranges[PROMREG_MAX];
+	int				num_fhc_ranges;
+};
+
+#endif /* !(_SPARC64_FHC_H) */
diff --git a/arch/sparc/include/asm/fixmap.h b/arch/sparc/include/asm/fixmap.h
new file mode 100644
index 00000000000..f18fc0755ad
--- /dev/null
+++ b/arch/sparc/include/asm/fixmap.h
@@ -0,0 +1,110 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the top of unused virtual memory (0xfd000000 - 1 page) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanism,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between IO pages at 0xfd000000 and
+ * the start of the fixmap.
+ */
+#define FIXADDR_TOP	(0xfcfff000UL)
+#define FIXADDR_SIZE	((__end_of_fixed_addresses) << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/sparc/include/asm/floppy.h b/arch/sparc/include/asm/floppy.h
new file mode 100644
index 00000000000..faebd335b60
--- /dev/null
+++ b/arch/sparc/include/asm/floppy.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FLOPPY_H
+#define ___ASM_SPARC_FLOPPY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/floppy_64.h>
+#else
+#include <asm/floppy_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
new file mode 100644
index 00000000000..ae3f00bf22f
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -0,0 +1,388 @@
+/* asm/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __ASM_SPARC_FLOPPY_H
+#define __ASM_SPARC_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef request_region
+#define release_region(X, Y)	do { } while(0)
+#define request_region(X, Y, Z)	(1)
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status_82072;  /* Main Status reg. */
+#define dcr_82072              status_82072   /* Digital Control reg. */
+#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
+
+	volatile unsigned char data_82072;    /* Data fifo. */
+#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
+
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+extern volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+	unsigned char (*fd_inb)(int port);
+	void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fd_enable_dma()
+#define fd_disable_dma()          sun_fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fd_request_irq()
+#define fd_free_irq()             /* nothing... */
+#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x)        (0)
+
+#define FLOPPY0_TYPE  4
+#define FLOPPY1_TYPE  0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1                      sun_floppy_init()
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static void sun_set_dor(unsigned char value, int fdc_82077)
+{
+	if (sparc_cpu_model == sun4c) {
+		unsigned int bits = 0;
+		if (value & 0x10)
+			bits |= AUXIO_FLPY_DSEL;
+		if ((value & 0x80) == 0)
+			bits |= AUXIO_FLPY_EJCT;
+		set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+	}
+	if (fdc_82077) {
+		sun_fdc->dor_82077 = value;
+	}
+}
+
+static unsigned char sun_read_dir(void)
+{
+	if (sparc_cpu_model == sun4c)
+		return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0;
+	else
+		return sun_fdc->dir_82077;
+}
+
+static unsigned char sun_82072_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82072 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82072;
+	case 7: /* FD_DIR */
+		return sun_read_dir();
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		sun_set_dor(value, 0);
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82072 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82072 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82072 = value;
+		break;
+	};
+	return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 0: /* FD_STATUS_0 */
+		return sun_fdc->status1_82077;
+	case 1: /* FD_STATUS_1 */
+		return sun_fdc->status2_82077;
+	case 2: /* FD_DOR */
+		return sun_fdc->dor_82077;
+	case 3: /* FD_TDR */
+		return sun_fdc->tapectl_82077;
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82077 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82077;
+	case 7: /* FD_DIR */
+		return sun_read_dir();
+	};
+	panic("sun_82077_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		sun_set_dor(value, 1);
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82077 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82077 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82077 = value;
+		break;
+	case 3: /* FD_TDR */
+		sun_fdc->tapectl_82077 = value;
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+extern char *pdma_vaddr;
+extern unsigned long pdma_size;
+extern volatile int doing_pdma;
+
+/* This is software state */
+extern char *pdma_base;
+extern unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static inline void virtual_dma_init(void)
+{
+	/* nothing... */
+}
+
+static inline void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = NULL;
+	}
+}
+
+static inline void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static inline void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static inline void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static inline void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+extern int sparc_floppy_request_irq(int irq, unsigned long flags,
+				    irq_handler_t irq_handler);
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+		error = sparc_floppy_request_irq(FLOPPY_IRQ,
+						 IRQF_DISABLED,
+						 floppy_interrupt);
+		return ((error == 0) ? 0 : -1);
+	} else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+	char state[128];
+	int tnode, fd_node, num_regs;
+	struct resource r;
+
+	use_virtual_dma = 1;
+
+	FLOPPY_IRQ = 11;
+	/* Forget it if we aren't on a machine that could possibly
+	 * ever have a floppy drive.
+	 */
+	if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+	   ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+	    (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+		/* We certainly don't have a floppy controller. */
+		goto no_sun_fdc;
+	}
+	/* Well, try to find one. */
+	tnode = prom_getchild(prom_root_node);
+	fd_node = prom_searchsiblings(tnode, "obio");
+	if(fd_node != 0) {
+		tnode = prom_getchild(fd_node);
+		fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+	} else {
+		fd_node = prom_searchsiblings(tnode, "fd");
+	}
+	if(fd_node == 0) {
+		goto no_sun_fdc;
+	}
+
+	/* The sun4m lets us know if the controller is actually usable. */
+	if(sparc_cpu_model == sun4m &&
+	   prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
+		if(!strcmp(state, "disabled")) {
+			goto no_sun_fdc;
+		}
+	}
+	num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+	num_regs = (num_regs / sizeof(fd_regs[0]));
+	prom_apply_obio_ranges(fd_regs, num_regs);
+	memset(&r, 0, sizeof(r));
+	r.flags = fd_regs[0].which_io;
+	r.start = fd_regs[0].phys_addr;
+	sun_fdc = (struct sun_flpy_controller *)
+	    sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+
+	/* Last minute sanity check... */
+	if(sun_fdc->status_82072 == 0xff) {
+		sun_fdc = NULL;
+		goto no_sun_fdc;
+	}
+
+	sun_fdops.fd_inb = sun_82077_fd_inb;
+	sun_fdops.fd_outb = sun_82077_fd_outb;
+	fdc_status = &sun_fdc->status_82077;
+
+	if (sun_fdc->dor_82077 == 0x80) {
+		sun_fdc->dor_82077 = 0x02;
+		if (sun_fdc->dor_82077 == 0x80) {
+			sun_fdops.fd_inb = sun_82072_fd_inb;
+			sun_fdops.fd_outb = sun_82072_fd_outb;
+			fdc_status = &sun_fdc->status_82072;
+		}
+	}
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	return (int) sun_fdc;
+
+no_sun_fdc:
+	return -1;
+}
+
+static int sparc_eject(void)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
new file mode 100644
index 00000000000..c39db1060bc
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -0,0 +1,782 @@
+/* floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ *
+ * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef __ASM_SPARC64_FLOPPY_H
+#define __ASM_SPARC64_FLOPPY_H
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/sbus.h>
+#include <asm/irq.h>
+
+
+/*
+ * Define this to enable exchanging drive 0 and 1 if only drive 1 is
+ * probed on PCI machines.
+ */
+#undef PCI_FDC_SWAP_DRIVES
+
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */
+	volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* Tape Control reg */
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on an Ultra anyways. */
+static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
+unsigned long fdc_status;
+static struct sbus_dev *floppy_sdev = NULL;
+
+struct sun_floppy_ops {
+	unsigned char	(*fd_inb) (unsigned long port);
+	void		(*fd_outb) (unsigned char value, unsigned long port);
+	void		(*fd_enable_dma) (void);
+	void		(*fd_disable_dma) (void);
+	void		(*fd_set_dma_mode) (int);
+	void		(*fd_set_dma_addr) (char *);
+	void		(*fd_set_dma_count) (int);
+	unsigned int	(*get_dma_residue) (void);
+	int		(*fd_request_irq) (void);
+	void		(*fd_free_irq) (void);
+	int		(*fd_eject) (int);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fdops.fd_enable_dma()
+#define fd_disable_dma()          sun_fdops.fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fdops.fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fdops.fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fdops.fd_set_dma_count(count)
+#define get_dma_residue(x)        sun_fdops.get_dma_residue()
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fdops.fd_request_irq()
+#define fd_free_irq()             sun_fdops.fd_free_irq()
+#define fd_eject(drive)           sun_fdops.fd_eject(drive)
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+static int sun_floppy_types[2] = { 0, 0 };
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FLOPPY0_TYPE		sun_floppy_init()
+#define FLOPPY1_TYPE		sun_floppy_types[1]
+
+#define FDC1			((unsigned long)sun_fdc)
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+static unsigned char sun_82077_fd_inb(unsigned long port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %lx\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sbus_readb(&sun_fdc->data_82077);
+	case 7: /* FD_DIR */
+		/* XXX: Is DCL on 0x80 in sun4m? */
+		return sbus_readb(&sun_fdc->dir_82077);
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, unsigned long port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %lx\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Happily, the 82077 has a real DOR register. */
+		sbus_writeb(value, &sun_fdc->dor_82077);
+		break;
+	case 5: /* FD_DATA */
+		sbus_writeb(value, &sun_fdc->data_82077);
+		break;
+	case 7: /* FD_DCR */
+		sbus_writeb(value, &sun_fdc->dcr_82077);
+		break;
+	case 4: /* FD_STATUS */
+		sbus_writeb(value, &sun_fdc->status_82077);
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+unsigned char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = NULL;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = NULL;
+	}
+}
+
+static void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie)
+{
+	if (likely(doing_pdma)) {
+		void __iomem *stat = (void __iomem *) fdc_status;
+		unsigned char *vaddr = pdma_vaddr;
+		unsigned long size = pdma_size;
+		u8 val;
+
+		while (size) {
+			val = readb(stat);
+			if (unlikely(!(val & 0x80))) {
+				pdma_vaddr = vaddr;
+				pdma_size = size;
+				return IRQ_HANDLED;
+			}
+			if (unlikely(!(val & 0x20))) {
+				pdma_vaddr = vaddr;
+				pdma_size = size;
+				doing_pdma = 0;
+				goto main_interrupt;
+			}
+			if (val & 0x40) {
+				/* read */
+				*vaddr++ = readb(stat + 1);
+			} else {
+				unsigned char data = *vaddr++;
+
+				/* write */
+				writeb(data, stat + 1);
+			}
+			size--;
+		}
+
+		pdma_vaddr = vaddr;
+		pdma_size = size;
+
+		/* Send Terminal Count pulse to floppy controller. */
+		val = readb(auxio_register);
+		val |= AUXIO_AUX1_FTCNT;
+		writeb(val, auxio_register);
+		val &= ~AUXIO_AUX1_FTCNT;
+		writeb(val, auxio_register);
+
+		doing_pdma = 0;
+	}
+
+main_interrupt:
+	return floppy_interrupt(irq, dev_cookie);
+}
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+
+		error = request_irq(FLOPPY_IRQ, sparc_floppy_irq,
+				    IRQF_DISABLED, "floppy", NULL);
+
+		return ((error == 0) ? 0 : -1);
+	}
+	return 0;
+}
+
+static void sun_fd_free_irq(void)
+{
+}
+
+static unsigned int sun_get_dma_residue(void)
+{
+	/* XXX This isn't really correct. XXX */
+	return 0;
+}
+
+static int sun_fd_eject(int drive)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+
+static struct ebus_dma_info sun_pci_fd_ebus_dma;
+static struct pci_dev *sun_pci_ebus_dev;
+static int sun_pci_broken_drive = -1;
+
+struct sun_pci_dma_op {
+	unsigned int 	addr;
+	int		len;
+	int		direction;
+	char		*buf;
+};
+static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL};
+static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL};
+
+extern irqreturn_t floppy_interrupt(int irq, void *dev_id);
+
+static unsigned char sun_pci_fd_inb(unsigned long port)
+{
+	udelay(5);
+	return inb(port);
+}
+
+static void sun_pci_fd_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	outb(val, port);
+}
+
+static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	/*
+	 * XXX: Due to SUN's broken floppy connector on AX and AXi
+	 *      we need to turn on MOTOR_0 also, if the floppy is
+	 *      jumpered to DS1 (like most PC floppies are). I hope
+	 *      this does not hurt correct hardware like the AXmp.
+	 *      (Eddie, Sep 12 1998).
+	 */
+	if (port == ((unsigned long)sun_fdc) + 2) {
+		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) {
+			val |= 0x10;
+		}
+	}
+	outb(val, port);
+}
+
+#ifdef PCI_FDC_SWAP_DRIVES
+static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	/*
+	 * XXX: Due to SUN's broken floppy connector on AX and AXi
+	 *      we need to turn on MOTOR_0 also, if the floppy is
+	 *      jumpered to DS1 (like most PC floppies are). I hope
+	 *      this does not hurt correct hardware like the AXmp.
+	 *      (Eddie, Sep 12 1998).
+	 */
+	if (port == ((unsigned long)sun_fdc) + 2) {
+		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) {
+			val &= ~(0x03);
+			val |= 0x21;
+		}
+	}
+	outb(val, port);
+}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+static void sun_pci_fd_enable_dma(void)
+{
+	BUG_ON((NULL == sun_pci_dma_pending.buf) 	||
+	    (0	  == sun_pci_dma_pending.len) 	||
+	    (0	  == sun_pci_dma_pending.direction));
+
+	sun_pci_dma_current.buf = sun_pci_dma_pending.buf;
+	sun_pci_dma_current.len = sun_pci_dma_pending.len;
+	sun_pci_dma_current.direction = sun_pci_dma_pending.direction;
+
+	sun_pci_dma_pending.buf  = NULL;
+	sun_pci_dma_pending.len  = 0;
+	sun_pci_dma_pending.direction = 0;
+	sun_pci_dma_pending.addr = -1U;
+
+	sun_pci_dma_current.addr =
+		pci_map_single(sun_pci_ebus_dev,
+			       sun_pci_dma_current.buf,
+			       sun_pci_dma_current.len,
+			       sun_pci_dma_current.direction);
+
+	ebus_dma_enable(&sun_pci_fd_ebus_dma, 1);
+
+	if (ebus_dma_request(&sun_pci_fd_ebus_dma,
+			     sun_pci_dma_current.addr,
+			     sun_pci_dma_current.len))
+		BUG();
+}
+
+static void sun_pci_fd_disable_dma(void)
+{
+	ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
+	if (sun_pci_dma_current.addr != -1U)
+		pci_unmap_single(sun_pci_ebus_dev,
+				 sun_pci_dma_current.addr,
+				 sun_pci_dma_current.len,
+				 sun_pci_dma_current.direction);
+	sun_pci_dma_current.addr = -1U;
+}
+
+static void sun_pci_fd_set_dma_mode(int mode)
+{
+	if (mode == DMA_MODE_WRITE)
+		sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
+	else
+		sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
+
+	ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
+}
+
+static void sun_pci_fd_set_dma_count(int length)
+{
+	sun_pci_dma_pending.len = length;
+}
+
+static void sun_pci_fd_set_dma_addr(char *buffer)
+{
+	sun_pci_dma_pending.buf = buffer;
+}
+
+static unsigned int sun_pci_get_dma_residue(void)
+{
+	return ebus_dma_residue(&sun_pci_fd_ebus_dma);
+}
+
+static int sun_pci_fd_request_irq(void)
+{
+	return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1);
+}
+
+static void sun_pci_fd_free_irq(void)
+{
+	ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0);
+}
+
+static int sun_pci_fd_eject(int drive)
+{
+	return -EINVAL;
+}
+
+void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie)
+{
+	floppy_interrupt(0, NULL);
+}
+
+/*
+ * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI,
+ * even if this is configured using DS1, thus looks like /dev/fd1 with
+ * the cabling used in Ultras.
+ */
+#define DOR	(port + 2)
+#define MSR	(port + 4)
+#define FIFO	(port + 5)
+
+static void sun_pci_fd_out_byte(unsigned long port, unsigned char val,
+			        unsigned long reg)
+{
+	unsigned char status;
+	int timeout = 1000;
+
+	while (!((status = inb(MSR)) & 0x80) && --timeout)
+		udelay(100);
+	outb(val, reg);
+}
+
+static unsigned char sun_pci_fd_sensei(unsigned long port)
+{
+	unsigned char result[2] = { 0x70, 0x00 };
+	unsigned char status;
+	int i = 0;
+
+	sun_pci_fd_out_byte(port, 0x08, FIFO);
+	do {
+		int timeout = 1000;
+
+		while (!((status = inb(MSR)) & 0x80) && --timeout)
+			udelay(100);
+
+		if (!timeout)
+			break;
+
+		if ((status & 0xf0) == 0xd0)
+			result[i++] = inb(FIFO);
+		else
+			break;
+	} while (i < 2);
+
+	return result[0];
+}
+
+static void sun_pci_fd_reset(unsigned long port)
+{
+	unsigned char mask = 0x00;
+	unsigned char status;
+	int timeout = 10000;
+
+	outb(0x80, MSR);
+	do {
+		status = sun_pci_fd_sensei(port);
+		if ((status & 0xc0) == 0xc0)
+			mask |= 1 << (status & 0x03);
+		else
+			udelay(100);
+	} while ((mask != 0x0f) && --timeout);
+}
+
+static int sun_pci_fd_test_drive(unsigned long port, int drive)
+{
+	unsigned char status, data;
+	int timeout = 1000;
+	int ready;
+
+	sun_pci_fd_reset(port);
+
+	data = (0x10 << drive) | 0x0c | drive;
+	sun_pci_fd_out_byte(port, data, DOR);
+
+	sun_pci_fd_out_byte(port, 0x07, FIFO);
+	sun_pci_fd_out_byte(port, drive & 0x03, FIFO);
+
+	do {
+		udelay(100);
+		status = sun_pci_fd_sensei(port);
+	} while (((status & 0xc0) == 0x80) && --timeout);
+
+	if (!timeout)
+		ready = 0;
+	else
+		ready = (status & 0x10) ? 0 : 1;
+
+	sun_pci_fd_reset(port);
+	return ready;
+}
+#undef FIFO
+#undef MSR
+#undef DOR
+
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCI
+static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
+{
+	if (!strcmp(edev->prom_node->name, "fdthree"))
+		return 1;
+	if (!strcmp(edev->prom_node->name, "floppy")) {
+		const char *compat;
+
+		compat = of_get_property(edev->prom_node,
+					 "compatible", NULL);
+		if (compat && !strcmp(compat, "fdthree"))
+			return 1;
+	}
+	return 0;
+}
+#endif
+
+static unsigned long __init sun_floppy_init(void)
+{
+	char state[128];
+	struct sbus_bus *bus;
+	struct sbus_dev *sdev = NULL;
+	static int initialized = 0;
+
+	if (initialized)
+		return sun_floppy_types[0];
+	initialized = 1;
+
+	for_all_sbusdev (sdev, bus) {
+		if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))
+			break;
+	}
+	if(sdev) {
+		floppy_sdev = sdev;
+		FLOPPY_IRQ = sdev->irqs[0];
+	} else {
+#ifdef CONFIG_PCI
+		struct linux_ebus *ebus;
+		struct linux_ebus_device *edev = NULL;
+		unsigned long config = 0;
+		void __iomem *auxio_reg;
+		const char *state_prop;
+
+		for_each_ebus(ebus) {
+			for_each_ebusdev(edev, ebus) {
+				if (ebus_fdthree_p(edev))
+					goto ebus_done;
+			}
+		}
+	ebus_done:
+		if (!edev)
+			return 0;
+
+		state_prop = of_get_property(edev->prom_node, "status", NULL);
+		if (state_prop && !strncmp(state_prop, "disabled", 8))
+			return 0;
+
+		FLOPPY_IRQ = edev->irqs[0];
+
+		/* Make sure the high density bit is set, some systems
+		 * (most notably Ultra5/Ultra10) come up with it clear.
+		 */
+		auxio_reg = (void __iomem *) edev->resource[2].start;
+		writel(readl(auxio_reg)|0x2, auxio_reg);
+
+		sun_pci_ebus_dev = ebus->self;
+
+		spin_lock_init(&sun_pci_fd_ebus_dma.lock);
+
+		/* XXX ioremap */
+		sun_pci_fd_ebus_dma.regs = (void __iomem *)
+			edev->resource[1].start;
+		if (!sun_pci_fd_ebus_dma.regs)
+			return 0;
+
+		sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
+					     EBUS_DMA_FLAG_TCI_DISABLE);
+		sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback;
+		sun_pci_fd_ebus_dma.client_cookie = NULL;
+		sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ;
+		strcpy(sun_pci_fd_ebus_dma.name, "floppy");
+		if (ebus_dma_register(&sun_pci_fd_ebus_dma))
+			return 0;
+
+		/* XXX ioremap */
+		sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
+
+		sun_fdops.fd_inb = sun_pci_fd_inb;
+		sun_fdops.fd_outb = sun_pci_fd_outb;
+
+		can_use_virtual_dma = use_virtual_dma = 0;
+		sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma;
+		sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma;
+		sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode;
+		sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr;
+		sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count;
+		sun_fdops.get_dma_residue = sun_pci_get_dma_residue;
+
+		sun_fdops.fd_request_irq = sun_pci_fd_request_irq;
+		sun_fdops.fd_free_irq = sun_pci_fd_free_irq;
+
+		sun_fdops.fd_eject = sun_pci_fd_eject;
+
+		fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+		/*
+		 * XXX: Find out on which machines this is really needed.
+		 */
+		if (1) {
+			sun_pci_broken_drive = 1;
+			sun_fdops.fd_outb = sun_pci_fd_broken_outb;
+		}
+
+		allowed_drive_mask = 0;
+		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0))
+			sun_floppy_types[0] = 4;
+		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1))
+			sun_floppy_types[1] = 4;
+
+		/*
+		 * Find NS87303 SuperIO config registers (through ecpp).
+		 */
+		for_each_ebus(ebus) {
+			for_each_ebusdev(edev, ebus) {
+				if (!strcmp(edev->prom_node->name, "ecpp")) {
+					config = edev->resource[1].start;
+					goto config_done;
+				}
+			}
+		}
+	config_done:
+
+		/*
+		 * Sanity check, is this really the NS87303?
+		 */
+		switch (config & 0x3ff) {
+		case 0x02e:
+		case 0x15c:
+		case 0x26e:
+		case 0x398:
+			break;
+		default:
+			config = 0;
+		}
+
+		if (!config)
+			return sun_floppy_types[0];
+
+		/* Enable PC-AT mode. */
+		ns87303_modify(config, ASC, 0, 0xc0);
+
+#ifdef PCI_FDC_SWAP_DRIVES
+		/*
+		 * If only Floppy 1 is present, swap drives.
+		 */
+		if (!sun_floppy_types[0] && sun_floppy_types[1]) {
+			/*
+			 * Set the drive exchange bit in FCR on NS87303,
+			 * make sure other bits are sane before doing so.
+			 */
+			ns87303_modify(config, FER, FER_EDM, 0);
+			ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
+			ns87303_modify(config, FCR, 0, FCR_LDE);
+
+			config = sun_floppy_types[0];
+			sun_floppy_types[0] = sun_floppy_types[1];
+			sun_floppy_types[1] = config;
+
+			if (sun_pci_broken_drive != -1) {
+				sun_pci_broken_drive = 1 - sun_pci_broken_drive;
+				sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb;
+			}
+		}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+		return sun_floppy_types[0];
+#else
+		return 0;
+#endif
+	}
+	prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
+	if(!strncmp(state, "disabled", 8))
+		return 0;
+
+	/*
+	 * We cannot do sbus_ioremap here: it does request_region,
+	 * which the generic floppy driver tries to do once again.
+	 * But we must use the sdev resource values as they have
+	 * had parent ranges applied.
+	 */
+	sun_fdc = (struct sun_flpy_controller *)
+		(sdev->resource[0].start +
+		 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
+
+	/* Last minute sanity check... */
+	if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
+		sun_fdc = (struct sun_flpy_controller *)-1;
+		return 0;
+	}
+
+        sun_fdops.fd_inb = sun_82077_fd_inb;
+        sun_fdops.fd_outb = sun_82077_fd_outb;
+
+	can_use_virtual_dma = use_virtual_dma = 1;
+	sun_fdops.fd_enable_dma = sun_fd_enable_dma;
+	sun_fdops.fd_disable_dma = sun_fd_disable_dma;
+	sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
+	sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
+	sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
+	sun_fdops.get_dma_residue = sun_get_dma_residue;
+
+	sun_fdops.fd_request_irq = sun_fd_request_irq;
+	sun_fdops.fd_free_irq = sun_fd_free_irq;
+
+	sun_fdops.fd_eject = sun_fd_eject;
+
+        fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	sun_floppy_types[0] = 4;
+	sun_floppy_types[1] = 0;
+
+	return sun_floppy_types[0];
+}
+
+#define EXTRA_FLOPPY_PARAMS
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+#endif /* !(__ASM_SPARC64_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/fpumacro.h b/arch/sparc/include/asm/fpumacro.h
new file mode 100644
index 00000000000..cc463fec806
--- /dev/null
+++ b/arch/sparc/include/asm/fpumacro.h
@@ -0,0 +1,33 @@
+/* fpumacro.h: FPU related macros.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_FPUMACRO_H
+#define _SPARC64_FPUMACRO_H
+
+#include <asm/asi.h>
+#include <asm/visasm.h>
+
+struct fpustate {
+	u32	regs[64];
+};
+
+#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
+
+static inline unsigned long fprs_read(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd %%fprs, %0" : "=r" (retval));
+
+	return retval;
+}
+
+static inline void fprs_write(unsigned long val)
+{
+	__asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
+}
+
+#endif /* !(_SPARC64_FPUMACRO_H) */
diff --git a/arch/sparc/include/asm/ftrace.h b/arch/sparc/include/asm/ftrace.h
new file mode 100644
index 00000000000..d27716cd38c
--- /dev/null
+++ b/arch/sparc/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC64_FTRACE
+#define _ASM_SPARC64_FTRACE
+
+#ifdef CONFIG_MCOUNT
+#define MCOUNT_ADDR		((long)(_mcount))
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_SPARC64_FTRACE */
diff --git a/arch/sparc/include/asm/futex.h b/arch/sparc/include/asm/futex.h
new file mode 100644
index 00000000000..736335f3671
--- /dev/null
+++ b/arch/sparc/include/asm/futex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FUTEX_H
+#define ___ASM_SPARC_FUTEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/futex_64.h>
+#else
+#include <asm/futex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/futex_32.h b/arch/sparc/include/asm/futex_32.h
new file mode 100644
index 00000000000..6a332a9f099
--- /dev/null
+++ b/arch/sparc/include/asm/futex_32.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/sparc/include/asm/futex_64.h b/arch/sparc/include/asm/futex_64.h
new file mode 100644
index 00000000000..47f95839dc6
--- /dev/null
+++ b/arch/sparc/include/asm/futex_64.h
@@ -0,0 +1,110 @@
+#ifndef _SPARC64_FUTEX_H
+#define _SPARC64_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+
+#define __futex_cas_op(insn, ret, oldval, uaddr, oparg)	\
+	__asm__ __volatile__(				\
+	"\n1:	lduwa	[%3] %%asi, %2\n"		\
+	"	" insn "\n"				\
+	"2:	casa	[%3] %%asi, %2, %1\n"		\
+	"	cmp	%2, %1\n"			\
+	"	bne,pn	%%icc, 1b\n"			\
+	"	 mov	0, %0\n"			\
+	"3:\n"						\
+	"	.section .fixup,#alloc,#execinstr\n"	\
+	"	.align	4\n"				\
+	"4:	sethi	%%hi(3b), %0\n"			\
+	"	jmpl	%0 + %%lo(3b), %%g0\n"		\
+	"	 mov	%5, %0\n"			\
+	"	.previous\n"				\
+	"	.section __ex_table,\"a\"\n"		\
+	"	.align	4\n"				\
+	"	.word	1b, 4b\n"			\
+	"	.word	2b, 4b\n"			\
+	"	.previous\n"				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tem)	\
+	: "r" (uaddr), "r" (oparg), "i" (-EFAULT)	\
+	: "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret, tem;
+
+	if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
+		return -EFAULT;
+	if (unlikely((((unsigned long) uaddr) & 0x3UL)))
+		return -EINVAL;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_cas_op("andn\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	__asm__ __volatile__(
+	"\n1:	casa	[%3] %%asi, %2, %0\n"
+	"2:\n"
+	"	.section .fixup,#alloc,#execinstr\n"
+	"	.align	4\n"
+	"3:	sethi	%%hi(2b), %0\n"
+	"	jmpl	%0 + %%lo(2b), %%g0\n"
+	"	 mov	%4, %0\n"
+	"	.previous\n"
+	"	.section __ex_table,\"a\"\n"
+	"	.align	4\n"
+	"	.word	1b, 3b\n"
+	"	.previous\n"
+	: "=r" (newval)
+	: "0" (newval), "r" (oldval), "r" (uaddr), "i" (-EFAULT)
+	: "memory");
+
+	return newval;
+}
+
+#endif /* !(_SPARC64_FUTEX_H) */
diff --git a/arch/sparc/include/asm/hardirq.h b/arch/sparc/include/asm/hardirq.h
new file mode 100644
index 00000000000..44d4e234514
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HARDIRQ_H
+#define ___ASM_SPARC_HARDIRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/hardirq_64.h>
+#else
+#include <asm/hardirq_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h
new file mode 100644
index 00000000000..4f63ed8df55
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq_32.h
@@ -0,0 +1,23 @@
+/* hardirq.h: 32-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef __SPARC_HARDIRQ_H
+#define __SPARC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS    8
+
+#endif /* __SPARC_HARDIRQ_H */
diff --git a/arch/sparc/include/asm/hardirq_64.h b/arch/sparc/include/asm/hardirq_64.h
new file mode 100644
index 00000000000..7c29fd1a87a
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq_64.h
@@ -0,0 +1,19 @@
+/* hardirq.h: 64-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997, 1998, 2005 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __SPARC64_HARDIRQ_H
+#define __SPARC64_HARDIRQ_H
+
+#include <asm/cpudata.h>
+
+#define __ARCH_IRQ_STAT
+#define local_softirq_pending() \
+	(local_cpu_data().__softirq_pending)
+
+void ack_bad_irq(unsigned int irq);
+
+#define HARDIRQ_BITS	8
+
+#endif /* !(__SPARC64_HARDIRQ_H) */
diff --git a/arch/sparc/include/asm/head.h b/arch/sparc/include/asm/head.h
new file mode 100644
index 00000000000..be8f03f3e73
--- /dev/null
+++ b/arch/sparc/include/asm/head.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HEAD_H
+#define ___ASM_SPARC_HEAD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/head_64.h>
+#else
+#include <asm/head_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/head_32.h b/arch/sparc/include/asm/head_32.h
new file mode 100644
index 00000000000..7c35491a8b5
--- /dev/null
+++ b/arch/sparc/include/asm/head_32.h
@@ -0,0 +1,102 @@
+#ifndef __SPARC_HEAD_H
+#define __SPARC_HEAD_H
+
+#define KERNBASE        0xf0000000  /* First address the kernel will eventually be */
+#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
+#define SUN4C_SEGSZ     (1 << 18)
+#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2)  /* Used in boot remapping. */
+#define INTS_ENAB        0x01           /* entry.S uses this. */
+
+#define SUN4_PROM_VECTOR 0xFFE81000     /* SUN4 PROM needs to be hardwired */
+
+#define WRITE_PAUSE      nop; nop; nop; /* Have to do this after %wim/%psr chg */
+#define NOP_INSN         0x01000000     /* Used to patch sparc_save_state */
+
+/* Here are some trap goodies */
+
+/* Generic trap entry. */
+#define TRAP_ENTRY(type, label) \
+	rd %psr, %l0; b label; rd %wim, %l3; nop;
+
+/* Data/text faults. Defaults to sun4c version at boot time. */
+#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
+#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
+#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
+#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
+
+/* This is for traps we should NEVER get. */
+#define BAD_TRAP(num) \
+        rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3;
+
+/* This is for traps when we want just skip the instruction which caused it */
+#define SKIP_TRAP(type, name) \
+	jmpl %l2, %g0; rett %l2 + 4; nop; nop;
+
+/* Notice that for the system calls we pull a trick.  We load up a
+ * different pointer to the system call vector table in %l7, but call
+ * the same generic system call low-level entry point.  The trap table
+ * entry sequences are also HyperSparc pipeline friendly ;-)
+ */
+
+/* Software trap for Linux system calls. */
+#define LINUX_SYSCALL_TRAP \
+        sethi %hi(sys_call_table), %l7; \
+        or %l7, %lo(sys_call_table), %l7; \
+        b linux_sparc_syscall; \
+        rd %psr, %l0;
+
+#define BREAKPOINT_TRAP \
+	b breakpoint_trap; \
+	rd %psr,%l0; \
+	nop; \
+	nop;
+
+#ifdef CONFIG_KGDB
+#define KGDB_TRAP(num) \
+	b kgdb_trap_low; \
+	rd %psr,%l0; \
+	nop; \
+	nop;
+#else
+#define KGDB_TRAP(num) \
+	BAD_TRAP(num)
+#endif
+
+/* The Get Condition Codes software trap for userland. */
+#define GETCC_TRAP \
+        b getcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Set Condition Codes software trap for userland. */
+#define SETCC_TRAP \
+        b setcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Get PSR software trap for userland. */
+#define GETPSR_TRAP \
+	mov %psr, %i0; jmp %l2; rett %l2 + 4; nop;
+
+/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and
+ * gets handled with another macro.
+ */
+#define TRAP_ENTRY_INTERRUPT(int_level) \
+        mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3;
+
+/* NMI's (Non Maskable Interrupts) are special, you can't keep them
+ * from coming in, and basically if you get one, the shows over. ;(
+ * On the sun4c they are usually asynchronous memory errors, on the
+ * the sun4m they could be either due to mem errors or a software
+ * initiated interrupt from the prom/kern on an SMP box saying "I
+ * command you to do CPU tricks, read your mailbox for more info."
+ */
+#define NMI_TRAP \
+        rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop;
+
+/* Window overflows/underflows are special and we need to try to be as
+ * efficient as possible here....
+ */
+#define WINDOW_SPILL \
+        rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#define WINDOW_FILL \
+        rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#endif /* __SPARC_HEAD_H */
diff --git a/arch/sparc/include/asm/head_64.h b/arch/sparc/include/asm/head_64.h
new file mode 100644
index 00000000000..10e9dabc4c4
--- /dev/null
+++ b/arch/sparc/include/asm/head_64.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC64_HEAD_H
+#define _SPARC64_HEAD_H
+
+#include <asm/pstate.h>
+
+	/* wrpr	%g0, val, %gl */
+#define SET_GL(val)	\
+	.word	0xa1902000 | val
+
+	/* rdpr %gl, %gN */
+#define GET_GL_GLOBAL(N)	\
+	.word	0x81540000 | (N << 25)
+
+#define KERNBASE	0x400000
+
+#define	PTREGS_OFF	(STACK_BIAS + STACKFRAME_SZ)
+
+#define __CHEETAH_ID	0x003e0014
+#define __JALAPENO_ID	0x003e0016
+#define __SERRANO_ID	0x003e0022
+
+#define CHEETAH_MANUF		0x003e
+#define CHEETAH_IMPL		0x0014 /* Ultra-III   */
+#define CHEETAH_PLUS_IMPL	0x0015 /* Ultra-III+  */
+#define JALAPENO_IMPL		0x0016 /* Ultra-IIIi  */
+#define JAGUAR_IMPL		0x0018 /* Ultra-IV    */
+#define PANTHER_IMPL		0x0019 /* Ultra-IV+   */
+#define SERRANO_IMPL		0x0022 /* Ultra-IIIi+ */
+
+#define BRANCH_IF_SUN4V(tmp1,label)		\
+	sethi	%hi(is_sun4v), %tmp1;		\
+	lduw	[%tmp1 + %lo(is_sun4v)], %tmp1; \
+	brnz,pn	%tmp1, label;			\
+	 nop
+
+#define BRANCH_IF_CHEETAH_BASE(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	sethi	%hi(__CHEETAH_ID), %tmp2;	\
+	srlx	%tmp1, 32, %tmp1;		\
+	or	%tmp2, %lo(__CHEETAH_ID), %tmp2;\
+	cmp	%tmp1, %tmp2;			\
+	be,pn	%icc, label;			\
+	 nop;
+
+#define BRANCH_IF_JALAPENO(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	sethi	%hi(__JALAPENO_ID), %tmp2;	\
+	srlx	%tmp1, 32, %tmp1;		\
+	or	%tmp2, %lo(__JALAPENO_ID), %tmp2;\
+	cmp	%tmp1, %tmp2;			\
+	be,pn	%icc, label;			\
+	 nop;
+
+#define BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_MANUF;		\
+	bne,pt	%xcc, 99f;			\
+	 sllx	%tmp1, 16, %tmp1;		\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_PLUS_IMPL;	\
+	bgeu,pt	%xcc, label;			\
+99:	 nop;
+
+#define BRANCH_IF_ANY_CHEETAH(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_MANUF;		\
+	bne,pt	%xcc, 99f;			\
+	 sllx	%tmp1, 16, %tmp1;		\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_IMPL;		\
+	bgeu,pt	%xcc, label;			\
+99:	 nop;
+
+#endif /* !(_SPARC64_HEAD_H) */
diff --git a/arch/sparc/include/asm/highmem.h b/arch/sparc/include/asm/highmem.h
new file mode 100644
index 00000000000..3de42e77627
--- /dev/null
+++ b/arch/sparc/include/asm/highmem.h
@@ -0,0 +1,81 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with 
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/vaddrs.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void kmap_init(void) __init;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.  Currently the simplest way to do this is to align the
+ * pkmap region on a pagetable boundary (4MB).
+ */
+#define LAST_PKMAP 1024
+#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT)
+#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT))
+
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern struct page *kmap_atomic_to_page(void *vaddr);
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/sparc/include/asm/hugetlb.h b/arch/sparc/include/asm/hugetlb.h
new file mode 100644
index 00000000000..177061064ee
--- /dev/null
+++ b/arch/sparc/include/asm/hugetlb.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_SPARC64_HUGETLB_H
+#define _ASM_SPARC64_HUGETLB_H
+
+#include <asm/page.h>
+
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep);
+
+void hugetlb_prefault_arch_hook(struct mm_struct *mm);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_SPARC64_HUGETLB_H */
diff --git a/arch/sparc/include/asm/hvtramp.h b/arch/sparc/include/asm/hvtramp.h
new file mode 100644
index 00000000000..b2b9b947b3a
--- /dev/null
+++ b/arch/sparc/include/asm/hvtramp.h
@@ -0,0 +1,37 @@
+#ifndef _SPARC64_HVTRAP_H
+#define _SPARC64_HVTRAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct hvtramp_mapping {
+	__u64		vaddr;
+	__u64		tte;
+};
+
+struct hvtramp_descr {
+	__u32			cpu;
+	__u32			num_mappings;
+	__u64			fault_info_va;
+	__u64			fault_info_pa;
+	__u64			thread_reg;
+	struct hvtramp_mapping	maps[1];
+};
+
+extern void hv_cpu_startup(unsigned long hvdescr_pa);
+
+#endif
+
+#define HVTRAMP_DESCR_CPU		0x00
+#define HVTRAMP_DESCR_NUM_MAPPINGS	0x04
+#define HVTRAMP_DESCR_FAULT_INFO_VA	0x08
+#define HVTRAMP_DESCR_FAULT_INFO_PA	0x10
+#define HVTRAMP_DESCR_THREAD_REG	0x18
+#define HVTRAMP_DESCR_MAPS		0x20
+
+#define HVTRAMP_MAPPING_VADDR		0x00
+#define HVTRAMP_MAPPING_TTE		0x08
+#define HVTRAMP_MAPPING_SIZE		0x10
+
+#endif /* _SPARC64_HVTRAP_H */
diff --git a/arch/sparc/include/asm/hw_irq.h b/arch/sparc/include/asm/hw_irq.h
new file mode 100644
index 00000000000..8d30a7694be
--- /dev/null
+++ b/arch/sparc/include/asm/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPARC_HW_IRQ_H
+#define __ASM_SPARC_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
new file mode 100644
index 00000000000..109ae24ba24
--- /dev/null
+++ b/arch/sparc/include/asm/hypervisor.h
@@ -0,0 +1,2949 @@
+#ifndef _SPARC64_HYPERVISOR_H
+#define _SPARC64_HYPERVISOR_H
+
+/* Sun4v hypervisor interfaces and defines.
+ *
+ * Hypervisor calls are made via traps to software traps number 0x80
+ * and above.  Registers %o0 to %o5 serve as argument, status, and
+ * return value registers.
+ *
+ * There are two kinds of these traps.  First there are the normal
+ * "fast traps" which use software trap 0x80 and encode the function
+ * to invoke by number in register %o5.  Argument and return value
+ * handling is as follows:
+ *
+ * -----------------------------------------------
+ * |  %o5  | function number |     undefined     |
+ * |  %o0  |   argument 0    |   return status   |
+ * |  %o1  |   argument 1    |   return value 1  |
+ * |  %o2  |   argument 2    |   return value 2  |
+ * |  %o3  |   argument 3    |   return value 3  |
+ * |  %o4  |   argument 4    |   return value 4  |
+ * -----------------------------------------------
+ *
+ * The second type are "hyper-fast traps" which encode the function
+ * number in the software trap number itself.  So these use trap
+ * numbers > 0x80.  The register usage for hyper-fast traps is as
+ * follows:
+ *
+ * -----------------------------------------------
+ * |  %o0  |   argument 0    |   return status   |
+ * |  %o1  |   argument 1    |   return value 1  |
+ * |  %o2  |   argument 2    |   return value 2  |
+ * |  %o3  |   argument 3    |   return value 3  |
+ * |  %o4  |   argument 4    |   return value 4  |
+ * -----------------------------------------------
+ *
+ * Registers providing explicit arguments to the hypervisor calls
+ * are volatile across the call.  Upon return their values are
+ * undefined unless explicitly specified as containing a particular
+ * return value by the specific call.  The return status is always
+ * returned in register %o0, zero indicates a successful execution of
+ * the hypervisor call and other values indicate an error status as
+ * defined below.  So, for example, if a hyper-fast trap takes
+ * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
+ * the call and %o3, %o4, and %o5 would be preserved.
+ *
+ * If the hypervisor trap is invalid, or the fast trap function number
+ * is invalid, HV_EBADTRAP will be returned in %o0.  Also, all 64-bits
+ * of the argument and return values are significant.
+ */
+
+/* Trap numbers.  */
+#define HV_FAST_TRAP		0x80
+#define HV_MMU_MAP_ADDR_TRAP	0x83
+#define HV_MMU_UNMAP_ADDR_TRAP	0x84
+#define HV_TTRACE_ADDENTRY_TRAP	0x85
+#define HV_CORE_TRAP		0xff
+
+/* Error codes.  */
+#define HV_EOK				0  /* Successful return            */
+#define HV_ENOCPU			1  /* Invalid CPU id               */
+#define HV_ENORADDR			2  /* Invalid real address         */
+#define HV_ENOINTR			3  /* Invalid interrupt id         */
+#define HV_EBADPGSZ			4  /* Invalid pagesize encoding    */
+#define HV_EBADTSB			5  /* Invalid TSB description      */
+#define HV_EINVAL			6  /* Invalid argument             */
+#define HV_EBADTRAP			7  /* Invalid function number      */
+#define HV_EBADALIGN			8  /* Invalid address alignment    */
+#define HV_EWOULDBLOCK			9  /* Cannot complete w/o blocking */
+#define HV_ENOACCESS			10 /* No access to resource        */
+#define HV_EIO				11 /* I/O error                    */
+#define HV_ECPUERROR			12 /* CPU in error state           */
+#define HV_ENOTSUPPORTED		13 /* Function not supported       */
+#define HV_ENOMAP			14 /* No mapping found             */
+#define HV_ETOOMANY			15 /* Too many items specified     */
+#define HV_ECHANNEL			16 /* Invalid LDC channel          */
+#define HV_EBUSY			17 /* Resource busy                */
+
+/* mach_exit()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_EXIT
+ * ARG0:	exit code
+ * ERRORS:	This service does not return.
+ *
+ * Stop all CPUs in the virtual domain and place them into the stopped
+ * state.  The 64-bit exit code may be passed to a service entity as
+ * the domain's exit status.  On systems without a service entity, the
+ * domain will undergo a reset, and the boot firmware will be
+ * reloaded.
+ *
+ * This function will never return to the guest that invokes it.
+ *
+ * Note: By convention an exit code of zero denotes a successful exit by
+ *       the guest code.  A non-zero exit code denotes a guest specific
+ *       error indication.
+ *
+ */
+#define HV_FAST_MACH_EXIT		0x00
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_exit(unsigned long exit_code);
+#endif
+
+/* Domain services.  */
+
+/* mach_desc()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_DESC
+ * ARG0:	buffer
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length
+ * ERRORS:	HV_EBADALIGN	Buffer is badly aligned
+ *		HV_ENORADDR	Buffer is to an illegal real address.
+ *		HV_EINVAL	Buffer length is too small for complete
+ *				machine description.
+ *
+ * Copy the most current machine description into the buffer indicated
+ * by the real address in ARG0.  The buffer provided must be 16 byte
+ * aligned.  Upon success or HV_EINVAL, this service returns the
+ * actual size of the machine description in the RET1 return value.
+ *
+ * Note: A method of determining the appropriate buffer size for the
+ *       machine description is to first call this service with a buffer
+ *       length of 0 bytes.
+ */
+#define HV_FAST_MACH_DESC		0x01
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
+				     unsigned long buf_len,
+				     unsigned long *real_buf_len);
+#endif
+
+/* mach_sir()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SIR
+ * ERRORS:	This service does not return.
+ *
+ * Perform a software initiated reset of the virtual machine domain.
+ * All CPUs are captured as soon as possible, all hardware devices are
+ * returned to the entry default state, and the domain is restarted at
+ * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
+ * of the CPUs.  The single CPU restarted is selected as determined by
+ * platform specific policy.  Memory is preserved across this
+ * operation.
+ */
+#define HV_FAST_MACH_SIR		0x02
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_sir(void);
+#endif
+
+/* mach_set_watchdog()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SET_WATCHDOG
+ * ARG0:	timeout in milliseconds
+ * RET0:	status
+ * RET1:	time remaining in milliseconds
+ *
+ * A guest uses this API to set a watchdog timer.  Once the gues has set
+ * the timer, it must call the timer service again either to disable or
+ * postpone the expiration.  If the timer expires before being reset or
+ * disabled, then the hypervisor take a platform specific action leading
+ * to guest termination within a bounded time period.  The platform action
+ * may include recovery actions such as reporting the expiration to a
+ * Service Processor, and/or automatically restarting the gues.
+ *
+ * The 'timeout' parameter is specified in milliseconds, however the
+ * implementated granularity is given by the 'watchdog-resolution'
+ * property in the 'platform' node of the guest's machine description.
+ * The largest allowed timeout value is specified by the
+ * 'watchdog-max-timeout' property of the 'platform' node.
+ *
+ * If the 'timeout' argument is not zero, the watchdog timer is set to
+ * expire after a minimum of 'timeout' milliseconds.
+ *
+ * If the 'timeout' argument is zero, the watchdog timer is disabled.
+ *
+ * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
+ * property, the hypervisor leaves the watchdog timer state unchanged,
+ * and returns a status of EINVAL.
+ *
+ * The 'time remaining' return value is valid regardless of whether the
+ * return status is EOK or EINVAL.  A non-zero return value indicates the
+ * number of milliseconds that were remaining until the timer was to expire.
+ * If less than one millisecond remains, the return value is '1'.  If the
+ * watchdog timer was disabled at the time of the call, the return value is
+ * zero.
+ *
+ * If the hypervisor cannot support the exact timeout value requested, but
+ * can support a larger timeout value, the hypervisor may round the actual
+ * timeout to a value larger than the requested timeout, consequently the
+ * 'time remaining' return value may be larger than the previously requested
+ * timeout value.
+ *
+ * Any guest OS debugger should be aware that the watchdog service may be in
+ * use.  Consequently, it is recommended that the watchdog service is
+ * disabled upon debugger entry (e.g. reaching a breakpoint), and then
+ * re-enabled upon returning to normal execution.  The API has been designed
+ * with this in mind, and the 'time remaining' result of the disable call may
+ * be used directly as the timeout argument of the re-enable call.
+ */
+#define HV_FAST_MACH_SET_WATCHDOG	0x05
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
+					     unsigned long *orig_timeout);
+#endif
+
+/* CPU services.
+ *
+ * CPUs represent devices that can execute software threads.  A single
+ * chip that contains multiple cores or strands is represented as
+ * multiple CPUs with unique CPU identifiers.  CPUs are exported to
+ * OBP via the machine description (and to the OS via the OBP device
+ * tree).  CPUs are always in one of three states: stopped, running,
+ * or error.
+ *
+ * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
+ * CPU within a logical domain.  Operations that are to be performed
+ * on multiple CPUs specify them via a CPU list.  A CPU list is an
+ * array in real memory, of which each 16-bit word is a CPU ID.  CPU
+ * lists are passed through the API as two arguments.  The first is
+ * the number of entries (16-bit words) in the CPU list, and the
+ * second is the (real address) pointer to the CPU ID list.
+ */
+
+/* cpu_start()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_START
+ * ARG0:	CPU ID
+ * ARG1:	PC
+ * ARG2:	RTBA
+ * ARG3:	target ARG0
+ * RET0:	status
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *		EINVAL		Target CPU ID is not in the stopped state
+ *		ENORADDR	Invalid PC or RTBA real address
+ *		EBADALIGN	Unaligned PC or unaligned RTBA
+ *		EWOULDBLOCK	Starting resources are not available
+ *
+ * Start CPU with given CPU ID with PC in %pc and with a real trap
+ * base address value of RTBA.  The indicated CPU must be in the
+ * stopped state.  The supplied RTBA must be aligned on a 256 byte
+ * boundary.  On successful completion, the specified CPU will be in
+ * the running state and will be supplied with "target ARG0" in %o0
+ * and RTBA in %tba.
+ */
+#define HV_FAST_CPU_START		0x10
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_start(unsigned long cpuid,
+				     unsigned long pc,
+				     unsigned long rtba,
+				     unsigned long arg0);
+#endif
+
+/* cpu_stop()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_STOP
+ * ARG0:	CPU ID
+ * RET0:	status
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *		EINVAL		Target CPU ID is the current cpu
+ *		EINVAL		Target CPU ID is not in the running state
+ *		EWOULDBLOCK	Stopping resources are not available
+ *		ENOTSUPPORTED	Not supported on this platform
+ *
+ * The specified CPU is stopped.  The indicated CPU must be in the
+ * running state.  On completion, it will be in the stopped state.  It
+ * is not legal to stop the current CPU.
+ *
+ * Note: As this service cannot be used to stop the current cpu, this service
+ *       may not be used to stop the last running CPU in a domain.  To stop
+ *       and exit a running domain, a guest must use the mach_exit() service.
+ */
+#define HV_FAST_CPU_STOP		0x11
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
+#endif
+
+/* cpu_yield()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_YIELD
+ * RET0:	status
+ * ERRORS:	No possible error.
+ *
+ * Suspend execution on the current CPU.  Execution will resume when
+ * an interrupt (device, %stick_compare, or cross-call) is targeted to
+ * the CPU.  On some CPUs, this API may be used by the hypervisor to
+ * save power by disabling hardware strands.
+ */
+#define HV_FAST_CPU_YIELD		0x12
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_yield(void);
+#endif
+
+/* cpu_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_QCONF
+ * ARG0:	queue
+ * ARG1:	base real address
+ * ARG2:	number of entries
+ * RET0:	status
+ * ERRORS:	ENORADDR	Invalid base real address
+ *		EINVAL		Invalid queue or number of entries is less
+ *				than 2 or too large.
+ *		EBADALIGN	Base real address is not correctly aligned
+ *				for size.
+ *
+ * Configure the given queue to be placed at the given base real
+ * address, with the given number of entries.  The number of entries
+ * must be a power of 2.  The base real address must be aligned
+ * exactly to match the queue size.  Each queue entry is 64 bytes
+ * long, so for example a 32 entry queue must be aligned on a 2048
+ * byte real address boundary.
+ *
+ * The specified queue is unconfigured if the number of entries is given
+ * as zero.
+ *
+ * For the current version of this API service, the argument queue is defined
+ * as follows:
+ *
+ *	queue		description
+ *	-----		-------------------------
+ *	0x3c		cpu mondo queue
+ *	0x3d		device mondo queue
+ *	0x3e		resumable error queue
+ *	0x3f		non-resumable error queue
+ *
+ * Note: The maximum number of entries for each queue for a specific cpu may
+ *       be determined from the machine description.
+ */
+#define HV_FAST_CPU_QCONF		0x14
+#define  HV_CPU_QUEUE_CPU_MONDO		 0x3c
+#define  HV_CPU_QUEUE_DEVICE_MONDO	 0x3d
+#define  HV_CPU_QUEUE_RES_ERROR		 0x3e
+#define  HV_CPU_QUEUE_NONRES_ERROR	 0x3f
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_qconf(unsigned long type,
+				     unsigned long queue_paddr,
+				     unsigned long num_queue_entries);
+#endif
+
+/* cpu_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_QINFO
+ * ARG0:	queue
+ * RET0:	status
+ * RET1:	base real address
+ * RET1:	number of entries
+ * ERRORS:	EINVAL		Invalid queue
+ *
+ * Return the configuration info for the given queue.  The base real
+ * address and number of entries of the defined queue are returned.
+ * The queue argument values are the same as for cpu_qconf() above.
+ *
+ * If the specified queue is a valid queue number, but no queue has
+ * been defined, the number of entries will be set to zero and the
+ * base real address returned is undefined.
+ */
+#define HV_FAST_CPU_QINFO		0x15
+
+/* cpu_mondo_send()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_MONDO_SEND
+ * ARG0-1:	CPU list
+ * ARG2:	data real address
+ * RET0:	status
+ * ERRORS:	EBADALIGN	Mondo data is not 64-byte aligned or CPU list
+ *				is not 2-byte aligned.
+ *		ENORADDR	Invalid data mondo address, or invalid cpu list
+ *				address.
+ *		ENOCPU		Invalid cpu in CPU list
+ *		EWOULDBLOCK	Some or all of the listed CPUs did not receive
+ *				the mondo
+ *		ECPUERROR	One or more of the listed CPUs are in error
+ *				state, use HV_FAST_CPU_STATE to see which ones
+ *		EINVAL		CPU list includes caller's CPU ID
+ *
+ * Send a mondo interrupt to the CPUs in the given CPU list with the
+ * 64-bytes at the given data real address.  The data must be 64-byte
+ * aligned.  The mondo data will be delivered to the cpu_mondo queues
+ * of the recipient CPUs.
+ *
+ * In all cases, error or not, the CPUs in the CPU list to which the
+ * mondo has been successfully delivered will be indicated by having
+ * their entry in CPU list updated with the value 0xffff.
+ */
+#define HV_FAST_CPU_MONDO_SEND		0x42
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
+#endif
+
+/* cpu_myid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_MYID
+ * RET0:	status
+ * RET1:	CPU ID
+ * ERRORS:	No errors defined.
+ *
+ * Return the hypervisor ID handle for the current CPU.  Use by a
+ * virtual CPU to discover it's own identity.
+ */
+#define HV_FAST_CPU_MYID		0x16
+
+/* cpu_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_STATE
+ * ARG0:	CPU ID
+ * RET0:	status
+ * RET1:	state
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *
+ * Retrieve the current state of the CPU with the given CPU ID.
+ */
+#define HV_FAST_CPU_STATE		0x17
+#define  HV_CPU_STATE_STOPPED		 0x01
+#define  HV_CPU_STATE_RUNNING		 0x02
+#define  HV_CPU_STATE_ERROR		 0x03
+
+#ifndef __ASSEMBLY__
+extern long sun4v_cpu_state(unsigned long cpuid);
+#endif
+
+/* cpu_set_rtba()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_SET_RTBA
+ * ARG0:	RTBA
+ * RET0:	status
+ * RET1:	previous RTBA
+ * ERRORS:	ENORADDR	Invalid RTBA real address
+ *		EBADALIGN	RTBA is incorrectly aligned for a trap table
+ *
+ * Set the real trap base address of the local cpu to the given RTBA.
+ * The supplied RTBA must be aligned on a 256 byte boundary.  Upon
+ * success the previous value of the RTBA is returned in RET1.
+ *
+ * Note: This service does not affect %tba
+ */
+#define HV_FAST_CPU_SET_RTBA		0x18
+
+/* cpu_set_rtba()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_GET_RTBA
+ * RET0:	status
+ * RET1:	previous RTBA
+ * ERRORS:	No possible error.
+ *
+ * Returns the current value of RTBA in RET1.
+ */
+#define HV_FAST_CPU_GET_RTBA		0x19
+
+/* MMU services.
+ *
+ * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
+ */
+#ifndef __ASSEMBLY__
+struct hv_tsb_descr {
+	unsigned short		pgsz_idx;
+	unsigned short		assoc;
+	unsigned int		num_ttes;	/* in TTEs */
+	unsigned int		ctx_idx;
+	unsigned int		pgsz_mask;
+	unsigned long		tsb_base;
+	unsigned long		resv;
+};
+#endif
+#define HV_TSB_DESCR_PGSZ_IDX_OFFSET	0x00
+#define HV_TSB_DESCR_ASSOC_OFFSET	0x02
+#define HV_TSB_DESCR_NUM_TTES_OFFSET	0x04
+#define HV_TSB_DESCR_CTX_IDX_OFFSET	0x08
+#define HV_TSB_DESCR_PGSZ_MASK_OFFSET	0x0c
+#define HV_TSB_DESCR_TSB_BASE_OFFSET	0x10
+#define HV_TSB_DESCR_RESV_OFFSET	0x18
+
+/* Page size bitmask.  */
+#define HV_PGSZ_MASK_8K			(1 << 0)
+#define HV_PGSZ_MASK_64K		(1 << 1)
+#define HV_PGSZ_MASK_512K		(1 << 2)
+#define HV_PGSZ_MASK_4MB		(1 << 3)
+#define HV_PGSZ_MASK_32MB		(1 << 4)
+#define HV_PGSZ_MASK_256MB		(1 << 5)
+#define HV_PGSZ_MASK_2GB		(1 << 6)
+#define HV_PGSZ_MASK_16GB		(1 << 7)
+
+/* Page size index.  The value given in the TSB descriptor must correspond
+ * to the smallest page size specified in the pgsz_mask page size bitmask.
+ */
+#define HV_PGSZ_IDX_8K			0
+#define HV_PGSZ_IDX_64K			1
+#define HV_PGSZ_IDX_512K		2
+#define HV_PGSZ_IDX_4MB			3
+#define HV_PGSZ_IDX_32MB		4
+#define HV_PGSZ_IDX_256MB		5
+#define HV_PGSZ_IDX_2GB			6
+#define HV_PGSZ_IDX_16GB		7
+
+/* MMU fault status area.
+ *
+ * MMU related faults have their status and fault address information
+ * placed into a memory region made available by privileged code.  Each
+ * virtual processor must make a mmu_fault_area_conf() call to tell the
+ * hypervisor where that processor's fault status should be stored.
+ *
+ * The fault status block is a multiple of 64-bytes and must be aligned
+ * on a 64-byte boundary.
+ */
+#ifndef __ASSEMBLY__
+struct hv_fault_status {
+	unsigned long		i_fault_type;
+	unsigned long		i_fault_addr;
+	unsigned long		i_fault_ctx;
+	unsigned long		i_reserved[5];
+	unsigned long		d_fault_type;
+	unsigned long		d_fault_addr;
+	unsigned long		d_fault_ctx;
+	unsigned long		d_reserved[5];
+};
+#endif
+#define HV_FAULT_I_TYPE_OFFSET	0x00
+#define HV_FAULT_I_ADDR_OFFSET	0x08
+#define HV_FAULT_I_CTX_OFFSET	0x10
+#define HV_FAULT_D_TYPE_OFFSET	0x40
+#define HV_FAULT_D_ADDR_OFFSET	0x48
+#define HV_FAULT_D_CTX_OFFSET	0x50
+
+#define HV_FAULT_TYPE_FAST_MISS	1
+#define HV_FAULT_TYPE_FAST_PROT	2
+#define HV_FAULT_TYPE_MMU_MISS	3
+#define HV_FAULT_TYPE_INV_RA	4
+#define HV_FAULT_TYPE_PRIV_VIOL	5
+#define HV_FAULT_TYPE_PROT_VIOL	6
+#define HV_FAULT_TYPE_NFO	7
+#define HV_FAULT_TYPE_NFO_SEFF	8
+#define HV_FAULT_TYPE_INV_VA	9
+#define HV_FAULT_TYPE_INV_ASI	10
+#define HV_FAULT_TYPE_NC_ATOMIC	11
+#define HV_FAULT_TYPE_PRIV_ACT	12
+#define HV_FAULT_TYPE_RESV1	13
+#define HV_FAULT_TYPE_UNALIGNED	14
+#define HV_FAULT_TYPE_INV_PGSZ	15
+/* Values 16 --> -2 are reserved.  */
+#define HV_FAULT_TYPE_MULTIPLE	-1
+
+/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
+ * and mmu_{map,unmap}_perm_addr().
+ */
+#define HV_MMU_DMMU			0x01
+#define HV_MMU_IMMU			0x02
+#define HV_MMU_ALL			(HV_MMU_DMMU | HV_MMU_IMMU)
+
+/* mmu_map_addr()
+ * TRAP:	HV_MMU_MAP_ADDR_TRAP
+ * ARG0:	virtual address
+ * ARG1:	mmu context
+ * ARG2:	TTE
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS:	EINVAL		Invalid virtual address, mmu context, or flags
+ *		EBADPGSZ	Invalid page size value
+ *		ENORADDR	Invalid real address in TTE
+ *
+ * Create a non-permanent mapping using the given TTE, virtual
+ * address, and mmu context.  The flags argument determines which
+ * (data, or instruction, or both) TLB the mapping gets loaded into.
+ *
+ * The behavior is undefined if the valid bit is clear in the TTE.
+ *
+ * Note: This API call is for privileged code to specify temporary translation
+ *       mappings without the need to create and manage a TSB.
+ */
+
+/* mmu_unmap_addr()
+ * TRAP:	HV_MMU_UNMAP_ADDR_TRAP
+ * ARG0:	virtual address
+ * ARG1:	mmu context
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS:	EINVAL		Invalid virtual address, mmu context, or flags
+ *
+ * Demaps the given virtual address in the given mmu context on this
+ * CPU.  This function is intended to be used to demap pages mapped
+ * with mmu_map_addr.  This service is equivalent to invoking
+ * mmu_demap_page() with only the current CPU in the CPU list. The
+ * flags argument determines which (data, or instruction, or both) TLB
+ * the mapping gets unmapped from.
+ *
+ * Attempting to perform an unmap operation for a previously defined
+ * permanent mapping will have undefined results.
+ */
+
+/* mmu_tsb_ctx0()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTX0
+ * ARG0:	number of TSB descriptions
+ * ARG1:	TSB descriptions pointer
+ * RET0:	status
+ * ERRORS:	ENORADDR		Invalid TSB descriptions pointer or
+ *					TSB base within a descriptor
+ *		EBADALIGN		TSB descriptions pointer is not aligned
+ *					to an 8-byte boundary, or TSB base
+ *					within a descriptor is not aligned for
+ *					the given TSB size
+ *		EBADPGSZ		Invalid page size in a TSB descriptor
+ *		EBADTSB			Invalid associativity or size in a TSB
+ *					descriptor
+ *		EINVAL			Invalid number of TSB descriptions, or
+ *					invalid context index in a TSB
+ *					descriptor, or index page size not
+ *					equal to smallest page size in page
+ *					size bitmask field.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * context zero.  The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: The maximum number of TSBs available to a virtual CPU is given by the
+ *       mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
+ *       machine description.
+ */
+#define HV_FAST_MMU_TSB_CTX0		0x20
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
+					unsigned long tsb_desc_ra);
+#endif
+
+/* mmu_tsb_ctxnon0()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTXNON0
+ * ARG0:	number of TSB descriptions
+ * ARG1:	TSB descriptions pointer
+ * RET0:	status
+ * ERRORS:	Same as for mmu_tsb_ctx0() above.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * non-zero contexts.  The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: A maximum of 16 TSBs may be specified in the TSB description list.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0		0x21
+
+/* mmu_demap_page()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_PAGE
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	virtual address
+ * ARG3:	mmu context
+ * ARG4:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address, context, or
+ *					flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps any page mapping of the given virtual address in the given
+ * mmu context for the current virtual CPU.  Any virtually tagged
+ * caches are guaranteed to be kept consistent.  The flags argument
+ * determines which TLB (instruction, or data, or both) participate in
+ * the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_PAGE		0x22
+
+/* mmu_demap_ctx()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_CTX
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	mmu context
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid context or flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the given context for the current virtual CPU.  Any virtual
+ * tagged caches are guaranteed to be kept consistent.  The flags
+ * argument determines which TLB (instruction, or data, or both)
+ * participate in the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_CTX		0x23
+
+/* mmu_demap_all()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_ALL
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the current virtual CPU.  Any virtual tagged caches are
+ * guaranteed to be kept consistent.  The flags argument determines
+ * which TLB (instruction, or data, or both) participate in the
+ * operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_ALL		0x24
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mmu_demap_all(void);
+#endif
+
+/* mmu_map_perm_addr()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_MAP_PERM_ADDR
+ * ARG0:	virtual address
+ * ARG1:	reserved, must be zero
+ * ARG2:	TTE
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address or flags value
+ *		EBADPGSZ		Invalid page size value
+ *		ENORADDR		Invalid real address in TTE
+ *		ETOOMANY		Too many mappings (max of 8 reached)
+ *
+ * Create a permanent mapping using the given TTE and virtual address
+ * for context 0 on the calling virtual CPU.  A maximum of 8 such
+ * permanent mappings may be specified by privileged code.  Mappings
+ * may be removed with mmu_unmap_perm_addr().
+ *
+ * The behavior is undefined if a TTE with the valid bit clear is given.
+ *
+ * Note: This call is used to specify address space mappings for which
+ *       privileged code does not expect to receive misses.  For example,
+ *       this mechanism can be used to map kernel nucleus code and data.
+ */
+#define HV_FAST_MMU_MAP_PERM_ADDR	0x25
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
+					     unsigned long set_to_zero,
+					     unsigned long tte,
+					     unsigned long flags);
+#endif
+
+/* mmu_fault_area_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_FAULT_AREA_CONF
+ * ARG0:	real address
+ * RET0:	status
+ * RET1:	previous mmu fault area real address
+ * ERRORS:	ENORADDR		Invalid real address
+ *		EBADALIGN		Invalid alignment for fault area
+ *
+ * Configure the MMU fault status area for the calling CPU.  A 64-byte
+ * aligned real address specifies where MMU fault status information
+ * is placed.  The return value is the previously specified area, or 0
+ * for the first invocation.  Specifying a fault area at real address
+ * 0 is not allowed.
+ */
+#define HV_FAST_MMU_FAULT_AREA_CONF	0x26
+
+/* mmu_enable()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_ENABLE
+ * ARG0:	enable flag
+ * ARG1:	return target address
+ * RET0:	status
+ * ERRORS:	ENORADDR		Invalid real address when disabling
+ *					translation.
+ *		EBADALIGN		The return target address is not
+ *					aligned to an instruction.
+ *		EINVAL			The enable flag request the current
+ *					operating mode (e.g. disable if already
+ *					disabled)
+ *
+ * Enable or disable virtual address translation for the calling CPU
+ * within the virtual machine domain.  If the enable flag is zero,
+ * translation is disabled, any non-zero value will enable
+ * translation.
+ *
+ * When this function returns, the newly selected translation mode
+ * will be active.  If the mmu is being enabled, then the return
+ * target address is a virtual address else it is a real address.
+ *
+ * Upon successful completion, control will be returned to the given
+ * return target address (ie. the cpu will jump to that address).  On
+ * failure, the previous mmu mode remains and the trap simply returns
+ * as normal with the appropriate error code in RET0.
+ */
+#define HV_FAST_MMU_ENABLE		0x27
+
+/* mmu_unmap_perm_addr()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_UNMAP_PERM_ADDR
+ * ARG0:	virtual address
+ * ARG1:	reserved, must be zero
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address or flags value
+ *		ENOMAP			Specified mapping was not found
+ *
+ * Demaps any permanent page mapping (established via
+ * mmu_map_perm_addr()) at the given virtual address for context 0 on
+ * the current virtual CPU.  Any virtual tagged caches are guaranteed
+ * to be kept consistent.
+ */
+#define HV_FAST_MMU_UNMAP_PERM_ADDR	0x28
+
+/* mmu_tsb_ctx0_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTX0_INFO
+ * ARG0:	max TSBs
+ * ARG1:	buffer pointer
+ * RET0:	status
+ * RET1:	number of TSBs
+ * ERRORS:	EINVAL			Supplied buffer is too small
+ *		EBADALIGN		The buffer pointer is badly aligned
+ *		ENORADDR		Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
+ * into the provided buffer.  The size of the buffer is given in ARG1
+ * in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured.  If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTX0_INFO	0x29
+
+/* mmu_tsb_ctxnon0_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTXNON0_INFO
+ * ARG0:	max TSBs
+ * ARG1:	buffer pointer
+ * RET0:	status
+ * RET1:	number of TSBs
+ * ERRORS:	EINVAL			Supplied buffer is too small
+ *		EBADALIGN		The buffer pointer is badly aligned
+ *		ENORADDR		Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by
+ * mmu_tsb_ctxnon0() into the provided buffer.  The size of the buffer
+ * is given in ARG1 in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured.  If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0_INFO	0x2a
+
+/* mmu_fault_area_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_FAULT_AREA_INFO
+ * RET0:	status
+ * RET1:	fault area real address
+ * ERRORS:	No errors defined.
+ *
+ * Return the currently defined MMU fault status area for the current
+ * CPU.  The real address of the fault status area is returned in
+ * RET1, or 0 is returned in RET1 if no fault status area is defined.
+ *
+ * Note: mmu_fault_area_conf() may be called with the return value (RET1)
+ *       from this service if there is a need to save and restore the fault
+ *	 area for a cpu.
+ */
+#define HV_FAST_MMU_FAULT_AREA_INFO	0x2b
+
+/* Cache and Memory services. */
+
+/* mem_scrub()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MEM_SCRUB
+ * ARG0:	real address
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length scrubbed
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Start address or length are not correctly
+ *				aligned
+ *		EINVAL		Length is zero
+ *
+ * Zero the memory contents in the range real address to real address
+ * plus length minus 1.  Also, valid ECC will be generated for that
+ * memory address range.  Scrubbing is started at the given real
+ * address, but may not scrub the entire given length.  The actual
+ * length scrubbed will be returned in RET1.
+ *
+ * The real address and length must be aligned on an 8K boundary, or
+ * contain the start address and length from a sun4v error report.
+ *
+ * Note: There are two uses for this function.  The first use is to block clear
+ *       and initialize memory and the second is to scrub an u ncorrectable
+ *       error reported via a resumable or non-resumable trap.  The second
+ *       use requires the arguments to be equal to the real address and length
+ *       provided in a sun4v memory error report.
+ */
+#define HV_FAST_MEM_SCRUB		0x31
+
+/* mem_sync()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MEM_SYNC
+ * ARG0:	real address
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length synced
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Start address or length are not correctly
+ *				aligned
+ *		EINVAL		Length is zero
+ *
+ * Force the next access within the real address to real address plus
+ * length minus 1 to be fetches from main system memory.  Less than
+ * the given length may be synced, the actual amount synced is
+ * returned in RET1.  The real address and length must be aligned on
+ * an 8K boundary.
+ */
+#define HV_FAST_MEM_SYNC		0x32
+
+/* Time of day services.
+ *
+ * The hypervisor maintains the time of day on a per-domain basis.
+ * Changing the time of day in one domain does not affect the time of
+ * day on any other domain.
+ *
+ * Time is described by a single unsigned 64-bit word which is the
+ * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
+ * 1970).
+ */
+
+/* tod_get()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TOD_GET
+ * RET0:	status
+ * RET1:	TOD
+ * ERRORS:	EWOULDBLOCK	TOD resource is temporarily unavailable
+ *		ENOTSUPPORTED	If TOD not supported on this platform
+ *
+ * Return the current time of day.  May block if TOD access is
+ * temporarily not possible.
+ */
+#define HV_FAST_TOD_GET			0x50
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_get(unsigned long *time);
+#endif
+
+/* tod_set()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TOD_SET
+ * ARG0:	TOD
+ * RET0:	status
+ * ERRORS:	EWOULDBLOCK	TOD resource is temporarily unavailable
+ *		ENOTSUPPORTED	If TOD not supported on this platform
+ *
+ * The current time of day is set to the value specified in ARG0.  May
+ * block if TOD access is temporarily not possible.
+ */
+#define HV_FAST_TOD_SET			0x51
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_set(unsigned long time);
+#endif
+
+/* Console services */
+
+/* con_getchar()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_GETCHAR
+ * RET0:	status
+ * RET1:	character
+ * ERRORS:	EWOULDBLOCK	No character available.
+ *
+ * Returns a character from the console device.  If no character is
+ * available then an EWOULDBLOCK error is returned.  If a character is
+ * available, then the returned status is EOK and the character value
+ * is in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit value -2.
+ */
+#define HV_FAST_CONS_GETCHAR		0x60
+
+/* con_putchar()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_PUTCHAR
+ * ARG0:	character
+ * RET0:	status
+ * ERRORS:	EINVAL		Illegal character
+ *		EWOULDBLOCK	Output buffer currently full, would block
+ *
+ * Send a character to the console device.  Only character values
+ * between 0 and 255 may be used.  Values outside this range are
+ * invalid except for the 64-bit value -1 which is used to send a
+ * virtual BREAK.
+ */
+#define HV_FAST_CONS_PUTCHAR		0x61
+
+/* con_read()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_READ
+ * ARG0:	buffer real address
+ * ARG1:	buffer size in bytes
+ * RET0:	status
+ * RET1:	bytes read or BREAK or HUP
+ * ERRORS:	EWOULDBLOCK	No character available.
+ *
+ * Reads characters into a buffer from the console device.  If no
+ * character is available then an EWOULDBLOCK error is returned.
+ * If a character is available, then the returned status is EOK
+ * and the number of bytes read into the given buffer is provided
+ * in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit RET1 value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit RET1 value -2.
+ *
+ * If BREAK or HUP are indicated, no bytes were read into buffer.
+ */
+#define HV_FAST_CONS_READ		0x62
+
+/* con_write()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_WRITE
+ * ARG0:	buffer real address
+ * ARG1:	buffer size in bytes
+ * RET0:	status
+ * RET1:	bytes written
+ * ERRORS:	EWOULDBLOCK	Output buffer currently full, would block
+ *
+ * Send a characters in buffer to the console device.  Breaks must be
+ * sent using con_putchar().
+ */
+#define HV_FAST_CONS_WRITE		0x63
+
+#ifndef __ASSEMBLY__
+extern long sun4v_con_getchar(long *status);
+extern long sun4v_con_putchar(long c);
+extern long sun4v_con_read(unsigned long buffer,
+			   unsigned long size,
+			   unsigned long *bytes_read);
+extern unsigned long sun4v_con_write(unsigned long buffer,
+				     unsigned long size,
+				     unsigned long *bytes_written);
+#endif
+
+/* mach_set_soft_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SET_SOFT_STATE
+ * ARG0:	software state
+ * ARG1:	software state description pointer
+ * RET0:	status
+ * ERRORS:	EINVAL		software state not valid or software state
+ *				description is not NULL terminated
+ *		ENORADDR	software state description pointer is not a
+ *				valid real address
+ *		EBADALIGNED	software state description is not correctly
+ *				aligned
+ *
+ * This allows the guest to report it's soft state to the hypervisor.  There
+ * are two primary components to this state.  The first part states whether
+ * the guest software is running or not.  The second containts optional
+ * details specific to the software.
+ *
+ * The software state argument is defined below in HV_SOFT_STATE_*, and
+ * indicates whether the guest is operating normally or in a transitional
+ * state.
+ *
+ * The software state description argument is a real address of a data buffer
+ * of size 32-bytes aligned on a 32-byte boundary.  It is treated as a NULL
+ * terminated 7-bit ASCII string of up to 31 characters not including the
+ * NULL termination.
+ */
+#define HV_FAST_MACH_SET_SOFT_STATE	0x70
+#define  HV_SOFT_STATE_NORMAL		 0x01
+#define  HV_SOFT_STATE_TRANSITION	 0x02
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
+					       unsigned long msg_string_ra);
+#endif
+
+/* mach_get_soft_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_GET_SOFT_STATE
+ * ARG0:	software state description pointer
+ * RET0:	status
+ * RET1:	software state
+ * ERRORS:	ENORADDR	software state description pointer is not a
+ *				valid real address
+ *		EBADALIGNED	software state description is not correctly
+ *				aligned
+ *
+ * Retrieve the current value of the guest's software state.  The rules
+ * for the software state pointer are the same as for mach_set_soft_state()
+ * above.
+ */
+#define HV_FAST_MACH_GET_SOFT_STATE	0x71
+
+/* svc_send()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_SEND
+ * ARG0:	service ID
+ * ARG1:	buffer real address
+ * ARG2:	buffer size
+ * RET0:	STATUS
+ * RET1:	sent_bytes
+ *
+ * Be careful, all output registers are clobbered by this operation,
+ * so for example it is not possible to save away a value in %o4
+ * across the trap.
+ */
+#define HV_FAST_SVC_SEND		0x80
+
+/* svc_recv()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_RECV
+ * ARG0:	service ID
+ * ARG1:	buffer real address
+ * ARG2:	buffer size
+ * RET0:	STATUS
+ * RET1:	recv_bytes
+ *
+ * Be careful, all output registers are clobbered by this operation,
+ * so for example it is not possible to save away a value in %o4
+ * across the trap.
+ */
+#define HV_FAST_SVC_RECV		0x81
+
+/* svc_getstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_GETSTATUS
+ * ARG0:	service ID
+ * RET0:	STATUS
+ * RET1:	status bits
+ */
+#define HV_FAST_SVC_GETSTATUS		0x82
+
+/* svc_setstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_SETSTATUS
+ * ARG0:	service ID
+ * ARG1:	bits to set
+ * RET0:	STATUS
+ */
+#define HV_FAST_SVC_SETSTATUS		0x83
+
+/* svc_clrstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_CLRSTATUS
+ * ARG0:	service ID
+ * ARG1:	bits to clear
+ * RET0:	STATUS
+ */
+#define HV_FAST_SVC_CLRSTATUS		0x84
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_svc_send(unsigned long svc_id,
+				    unsigned long buffer,
+				    unsigned long buffer_size,
+				    unsigned long *sent_bytes);
+extern unsigned long sun4v_svc_recv(unsigned long svc_id,
+				    unsigned long buffer,
+				    unsigned long buffer_size,
+				    unsigned long *recv_bytes);
+extern unsigned long sun4v_svc_getstatus(unsigned long svc_id,
+					 unsigned long *status_bits);
+extern unsigned long sun4v_svc_setstatus(unsigned long svc_id,
+					 unsigned long status_bits);
+extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id,
+					 unsigned long status_bits);
+#endif
+
+/* Trap trace services.
+ *
+ * The hypervisor provides a trap tracing capability for privileged
+ * code running on each virtual CPU.  Privileged code provides a
+ * round-robin trap trace queue within which the hypervisor writes
+ * 64-byte entries detailing hyperprivileged traps taken n behalf of
+ * privileged code.  This is provided as a debugging capability for
+ * privileged code.
+ *
+ * The trap trace control structure is 64-bytes long and placed at the
+ * start (offset 0) of the trap trace buffer, and is described as
+ * follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_control {
+	unsigned long		head_offset;
+	unsigned long		tail_offset;
+	unsigned long		__reserved[0x30 / sizeof(unsigned long)];
+};
+#endif
+#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET	0x00
+#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET	0x08
+
+/* The head offset is the offset of the most recently completed entry
+ * in the trap-trace buffer.  The tail offset is the offset of the
+ * next entry to be written.  The control structure is owned and
+ * modified by the hypervisor.  A guest may not modify the control
+ * structure contents.  Attempts to do so will result in undefined
+ * behavior for the guest.
+ *
+ * Each trap trace buffer entry is layed out as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_entry {
+	unsigned char	type;		/* Hypervisor or guest entry?	*/
+	unsigned char	hpstate;	/* Hyper-privileged state	*/
+	unsigned char	tl;		/* Trap level			*/
+	unsigned char	gl;		/* Global register level	*/
+	unsigned short	tt;		/* Trap type			*/
+	unsigned short	tag;		/* Extended trap identifier	*/
+	unsigned long	tstate;		/* Trap state			*/
+	unsigned long	tick;		/* Tick				*/
+	unsigned long	tpc;		/* Trap PC			*/
+	unsigned long	f1;		/* Entry specific		*/
+	unsigned long	f2;		/* Entry specific		*/
+	unsigned long	f3;		/* Entry specific		*/
+	unsigned long	f4;		/* Entry specific		*/
+};
+#endif
+#define HV_TRAP_TRACE_ENTRY_TYPE	0x00
+#define HV_TRAP_TRACE_ENTRY_HPSTATE	0x01
+#define HV_TRAP_TRACE_ENTRY_TL		0x02
+#define HV_TRAP_TRACE_ENTRY_GL		0x03
+#define HV_TRAP_TRACE_ENTRY_TT		0x04
+#define HV_TRAP_TRACE_ENTRY_TAG		0x06
+#define HV_TRAP_TRACE_ENTRY_TSTATE	0x08
+#define HV_TRAP_TRACE_ENTRY_TICK	0x10
+#define HV_TRAP_TRACE_ENTRY_TPC		0x18
+#define HV_TRAP_TRACE_ENTRY_F1		0x20
+#define HV_TRAP_TRACE_ENTRY_F2		0x28
+#define HV_TRAP_TRACE_ENTRY_F3		0x30
+#define HV_TRAP_TRACE_ENTRY_F4		0x38
+
+/* The type field is encoded as follows.  */
+#define HV_TRAP_TYPE_UNDEF		0x00 /* Entry content undefined     */
+#define HV_TRAP_TYPE_HV			0x01 /* Hypervisor trap entry       */
+#define HV_TRAP_TYPE_GUEST		0xff /* Added via ttrace_addentry() */
+
+/* ttrace_buf_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_BUF_CONF
+ * ARG0:	real address
+ * ARG1:	number of entries
+ * RET0:	status
+ * RET1:	number of entries
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EINVAL		Size is too small
+ *		EBADALIGN	Real address not aligned on 64-byte boundary
+ *
+ * Requests hypervisor trap tracing and declares a virtual CPU's trap
+ * trace buffer to the hypervisor.  The real address supplies the real
+ * base address of the trap trace queue and must be 64-byte aligned.
+ * Specifying a value of 0 for the number of entries disables trap
+ * tracing for the calling virtual CPU.  The buffer allocated must be
+ * sized for a power of two number of 64-byte trap trace entries plus
+ * an initial 64-byte control structure.
+ *
+ * This may be invoked any number of times so that a virtual CPU may
+ * relocate a trap trace buffer or create "snapshots" of information.
+ *
+ * If the real address is illegal or badly aligned, then trap tracing
+ * is disabled and an error is returned.
+ *
+ * Upon failure with EINVAL, this service call returns in RET1 the
+ * minimum number of buffer entries required.  Upon other failures
+ * RET1 is undefined.
+ */
+#define HV_FAST_TTRACE_BUF_CONF		0x90
+
+/* ttrace_buf_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_BUF_INFO
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	size
+ * ERRORS:	None defined.
+ *
+ * Returns the size and location of the previously declared trap-trace
+ * buffer.  In the event that no buffer was previously defined, or the
+ * buffer is disabled, this call will return a size of zero bytes.
+ */
+#define HV_FAST_TTRACE_BUF_INFO		0x91
+
+/* ttrace_enable()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_ENABLE
+ * ARG0:	enable
+ * RET0:	status
+ * RET1:	previous enable state
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Enable or disable trap tracing, and return the previous enabled
+ * state in RET1.  Future systems may define various flags for the
+ * enable argument (ARG0), for the moment a guest should pass
+ * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
+ * tracing - which will ensure future compatability.
+ */
+#define HV_FAST_TTRACE_ENABLE		0x92
+
+/* ttrace_freeze()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_FREEZE
+ * ARG0:	freeze
+ * RET0:	status
+ * RET1:	previous freeze state
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Freeze or unfreeze trap tracing, returning the previous freeze
+ * state in RET1.  A guest should pass a non-zero value to freeze and
+ * a zero value to unfreeze all tracing.  The returned previous state
+ * is 0 for not frozen and 1 for frozen.
+ */
+#define HV_FAST_TTRACE_FREEZE		0x93
+
+/* ttrace_addentry()
+ * TRAP:	HV_TTRACE_ADDENTRY_TRAP
+ * ARG0:	tag (16-bits)
+ * ARG1:	data word 0
+ * ARG2:	data word 1
+ * ARG3:	data word 2
+ * ARG4:	data word 3
+ * RET0:	status
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Add an entry to the trap trace buffer.  Upon return only ARG0/RET0
+ * is modified - none of the other registers holding arguments are
+ * volatile across this hypervisor service.
+ */
+
+/* Core dump services.
+ *
+ * Since the hypervisor viraulizes and thus obscures a lot of the
+ * physical machine layout and state, traditional OS crash dumps can
+ * be difficult to diagnose especially when the problem is a
+ * configuration error of some sort.
+ *
+ * The dump services provide an opaque buffer into which the
+ * hypervisor can place it's internal state in order to assist in
+ * debugging such situations.  The contents are opaque and extremely
+ * platform and hypervisor implementation specific.  The guest, during
+ * a core dump, requests that the hypervisor update any information in
+ * the dump buffer in preparation to being dumped as part of the
+ * domain's memory image.
+ */
+
+/* dump_buf_update()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_DUMP_BUF_UPDATE
+ * ARG0:	real address
+ * ARG1:	size
+ * RET0:	status
+ * RET1:	required size of dump buffer
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Real address is not aligned on a 64-byte
+ *				boundary
+ *		EINVAL		Size is non-zero but less than minimum size
+ *				required
+ *		ENOTSUPPORTED	Operation not supported on current logical
+ *				domain
+ *
+ * Declare a domain dump buffer to the hypervisor.  The real address
+ * provided for the domain dump buffer must be 64-byte aligned.  The
+ * size specifies the size of the dump buffer and may be larger than
+ * the minimum size specified in the machine description.  The
+ * hypervisor will fill the dump buffer with opaque data.
+ *
+ * Note: A guest may elect to include dump buffer contents as part of a crash
+ *       dump to assist with debugging.  This function may be called any number
+ *       of times so that a guest may relocate a dump buffer, or create
+ *       "snapshots" of any dump-buffer information.  Each call to
+ *       dump_buf_update() atomically declares the new dump buffer to the
+ *       hypervisor.
+ *
+ * A specified size of 0 unconfigures the dump buffer.  If the real
+ * address is illegal or badly aligned, then any currently active dump
+ * buffer is disabled and an error is returned.
+ *
+ * In the event that the call fails with EINVAL, RET1 contains the
+ * minimum size requires by the hypervisor for a valid dump buffer.
+ */
+#define HV_FAST_DUMP_BUF_UPDATE		0x94
+
+/* dump_buf_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_DUMP_BUF_INFO
+ * RET0:	status
+ * RET1:	real address of current dump buffer
+ * RET2:	size of current dump buffer
+ * ERRORS:	No errors defined.
+ *
+ * Return the currently configures dump buffer description.  A
+ * returned size of 0 bytes indicates an undefined dump buffer.  In
+ * this case the return address in RET1 is undefined.
+ */
+#define HV_FAST_DUMP_BUF_INFO		0x95
+
+/* Device interrupt services.
+ *
+ * Device interrupts are allocated to system bus bridges by the hypervisor,
+ * and described to OBP in the machine description.  OBP then describes
+ * these interrupts to the OS via properties in the device tree.
+ *
+ * Terminology:
+ *
+ *	cpuid		Unique opaque value which represents a target cpu.
+ *
+ *	devhandle	Device handle.  It uniquely identifies a device, and
+ *			consistes of the lower 28-bits of the hi-cell of the
+ *			first entry of the device's "reg" property in the
+ *			OBP device tree.
+ *
+ *	devino		Device interrupt number.  Specifies the relative
+ *			interrupt number within the device.  The unique
+ *			combination of devhandle and devino are used to
+ *			identify a specific device interrupt.
+ *
+ *			Note: The devino value is the same as the values in the
+ *			      "interrupts" property or "interrupt-map" property
+ *			      in the OBP device tree for that device.
+ *
+ *	sysino		System interrupt number.  A 64-bit unsigned interger
+ *			representing a unique interrupt within a virtual
+ *			machine.
+ *
+ *	intr_state	A flag representing the interrupt state for a given
+ *			sysino.  The state values are defined below.
+ *
+ *	intr_enabled	A flag representing the 'enabled' state for a given
+ *			sysino.  The enable values are defined below.
+ */
+
+#define HV_INTR_STATE_IDLE		0 /* Nothing pending */
+#define HV_INTR_STATE_RECEIVED		1 /* Interrupt received by hardware */
+#define HV_INTR_STATE_DELIVERED		2 /* Interrupt delivered to queue */
+
+#define HV_INTR_DISABLED		0 /* sysino not enabled */
+#define HV_INTR_ENABLED			1 /* sysino enabled */
+
+/* intr_devino_to_sysino()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_DEVINO2SYSINO
+ * ARG0:	devhandle
+ * ARG1:	devino
+ * RET0:	status
+ * RET1:	sysino
+ * ERRORS:	EINVAL		Invalid devhandle/devino
+ *
+ * Converts a device specific interrupt number of the given
+ * devhandle/devino into a system specific ino (sysino).
+ */
+#define HV_FAST_INTR_DEVINO2SYSINO	0xa0
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
+					    unsigned long devino);
+#endif
+
+/* intr_getenabled()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETENABLED
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns interrupt enabled state in RET1 for the interrupt defined
+ * by the given sysino.
+ */
+#define HV_FAST_INTR_GETENABLED		0xa1
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
+#endif
+
+/* intr_setenabled()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETENABLED
+ * ARG0:	sysino
+ * ARG1:	intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino or intr_enabled value
+ *
+ * Set the 'enabled' state of the interrupt sysino.
+ */
+#define HV_FAST_INTR_SETENABLED		0xa2
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
+#endif
+
+/* intr_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETSTATE
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	intr_state (HV_INTR_STATE_*)
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns current state of the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_GETSTATE		0xa3
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getstate(unsigned long sysino);
+#endif
+
+/* intr_setstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETSTATE
+ * ARG0:	sysino
+ * ARG1:	intr_state (HV_INTR_STATE_*)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino or intr_state value
+ *
+ * Sets the current state of the interrupt described by the given sysino
+ * value.
+ *
+ * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
+ *       interrupt for sysino.
+ */
+#define HV_FAST_INTR_SETSTATE		0xa4
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
+#endif
+
+/* intr_gettarget()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETTARGET
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	cpuid
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns CPU that is the current target of the interrupt defined by
+ * the given sysino.  The CPU value returned is undefined if the target
+ * has not been set via intr_settarget().
+ */
+#define HV_FAST_INTR_GETTARGET		0xa5
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
+#endif
+
+/* intr_settarget()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETTARGET
+ * ARG0:	sysino
+ * ARG1:	cpuid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino
+ *		ENOCPU		Invalid cpuid
+ *
+ * Set the target CPU for the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_SETTARGET		0xa6
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
+#endif
+
+/* vintr_get_cookie()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_COOKIE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	cookie
+ */
+#define HV_FAST_VINTR_GET_COOKIE	0xa7
+
+/* vintr_set_cookie()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_COOKIE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	cookie
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_COOKIE	0xa8
+
+/* vintr_get_valid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_VALID
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	valid state
+ */
+#define HV_FAST_VINTR_GET_VALID		0xa9
+
+/* vintr_set_valid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_VALID
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	valid state
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_VALID		0xaa
+
+/* vintr_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_STATE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	state
+ */
+#define HV_FAST_VINTR_GET_STATE		0xab
+
+/* vintr_set_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_STATE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	state
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_STATE		0xac
+
+/* vintr_get_target()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_TARGET
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	cpuid
+ */
+#define HV_FAST_VINTR_GET_TARGET	0xad
+
+/* vintr_set_target()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_TARGET
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	cpuid
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_TARGET	0xae
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long *cookie);
+extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long cookie);
+extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long *valid);
+extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long valid);
+extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long *state);
+extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long state);
+extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long *cpuid);
+extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long cpuid);
+#endif
+
+/* PCI IO services.
+ *
+ * See the terminology descriptions in the device interrupt services
+ * section above as those apply here too.  Here are terminology
+ * definitions specific to these PCI IO services:
+ *
+ *	tsbnum		TSB number.  Indentifies which io-tsb is used.
+ *			For this version of the specification, tsbnum
+ *			must be zero.
+ *
+ *	tsbindex	TSB index.  Identifies which entry in the TSB
+ *			is used.  The first entry is zero.
+ *
+ *	tsbid		A 64-bit aligned data structure which contains
+ *			a tsbnum and a tsbindex.  Bits 63:32 contain the
+ *			tsbnum and bits 31:00 contain the tsbindex.
+ *
+ *			Use the HV_PCI_TSBID() macro to construct such
+ * 			values.
+ *
+ *	io_attributes	IO attributes for IOMMU mappings.  One of more
+ *			of the attritbute bits are stores in a 64-bit
+ *			value.  The values are defined below.
+ *
+ *	r_addr		64-bit real address
+ *
+ *	pci_device	PCI device address.  A PCI device address identifies
+ *			a specific device on a specific PCI bus segment.
+ *			A PCI device address ia a 32-bit unsigned integer
+ *			with the following format:
+ *
+ *				00000000.bbbbbbbb.dddddfff.00000000
+ *
+ *			Use the HV_PCI_DEVICE_BUILD() macro to construct
+ *			such values.
+ *
+ *	pci_config_offset
+ *			PCI configureation space offset.  For conventional
+ *			PCI a value between 0 and 255.  For extended
+ *			configuration space, a value between 0 and 4095.
+ *
+ *			Note: For PCI configuration space accesses, the offset
+ *			      must be aligned to the access size.
+ *
+ *	error_flag	A return value which specifies if the action succeeded
+ *			or failed.  0 means no error, non-0 means some error
+ *			occurred while performing the service.
+ *
+ *	io_sync_direction
+ *			Direction definition for pci_dma_sync(), defined
+ *			below in HV_PCI_SYNC_*.
+ *
+ *	io_page_list	A list of io_page_addresses, an io_page_address is
+ *			a real address.
+ *
+ *	io_page_list_p	A pointer to an io_page_list.
+ *
+ *	"size based byte swap" - Some functions do size based byte swapping
+ *				 which allows sw to access pointers and
+ *				 counters in native form when the processor
+ *				 operates in a different endianness than the
+ *				 IO bus.  Size-based byte swapping converts a
+ *				 multi-byte field between big-endian and
+ *				 little-endian format.
+ */
+
+#define HV_PCI_MAP_ATTR_READ		0x01
+#define HV_PCI_MAP_ATTR_WRITE		0x02
+
+#define HV_PCI_DEVICE_BUILD(b,d,f)	\
+	((((b) & 0xff) << 16) | \
+	 (((d) & 0x1f) << 11) | \
+	 (((f) & 0x07) <<  8))
+
+#define HV_PCI_TSBID(__tsb_num, __tsb_index) \
+	((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
+
+#define HV_PCI_SYNC_FOR_DEVICE		0x01
+#define HV_PCI_SYNC_FOR_CPU		0x02
+
+/* pci_iommu_map()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_MAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * ARG2:	#ttes
+ * ARG3:	io_attributes
+ * ARG4:	io_page_list_p
+ * RET0:	status
+ * RET1:	#ttes mapped
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex/io_attributes
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Invalid real address
+ *
+ * Create IOMMU mappings in the sun4v device defined by the given
+ * devhandle.  The mappings are created in the TSB defined by the
+ * tsbnum component of the given tsbid.  The first mapping is created
+ * in the TSB i ndex defined by the tsbindex component of the given tsbid.
+ * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
+ * the second at tsbnum, tsbindex + 1, etc.
+ *
+ * All mappings are created with the attributes defined by the io_attributes
+ * argument.  The page mapping addresses are described in the io_page_list
+ * defined by the given io_page_list_p, which is a pointer to the io_page_list.
+ * The first entry in the io_page_list is the address for the first iotte, the
+ * 2nd for the 2nd iotte, and so on.
+ *
+ * Each io_page_address in the io_page_list must be appropriately aligned.
+ * #ttes must be greater than zero.  For this version of the spec, the tsbnum
+ * component of the given tsbid must be zero.
+ *
+ * Returns the actual number of mappings creates, which may be less than
+ * or equal to the argument #ttes.  If the function returns a value which
+ * is less than the #ttes, the caller may continus to call the function with
+ * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
+ * mapped.
+ *
+ * Note: This function does not imply an iotte cache flush.  The guest must
+ *       demap an entry before re-mapping it.
+ */
+#define HV_FAST_PCI_IOMMU_MAP		0xb0
+
+/* pci_iommu_demap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_DEMAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * ARG2:	#ttes
+ * RET0:	status
+ * RET1:	#ttes demapped
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex
+ *
+ * Demap and flush IOMMU mappings in the device defined by the given
+ * devhandle.  Demaps up to #ttes entries in the TSB defined by the tsbnum
+ * component of the given tsbid, starting at the TSB index defined by the
+ * tsbindex component of the given tsbid.
+ *
+ * For this version of the spec, the tsbnum of the given tsbid must be zero.
+ * #ttes must be greater than zero.
+ *
+ * Returns the actual number of ttes demapped, which may be less than or equal
+ * to the argument #ttes.  If #ttes demapped is less than #ttes, the caller
+ * may continue to call this function with updated tsbid and #ttes arguments
+ * until all pages are demapped.
+ *
+ * Note: Entries do not have to be mapped to be demapped.  A demap of an
+ *       unmapped page will flush the entry from the tte cache.
+ */
+#define HV_FAST_PCI_IOMMU_DEMAP		0xb1
+
+/* pci_iommu_getmap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_GETMAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * RET0:	status
+ * RET1:	io_attributes
+ * RET2:	real address
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex
+ *		ENOMAP		Mapping is not valid, no translation exists
+ *
+ * Read and return the mapping in the device described by the given devhandle
+ * and tsbid.  If successful, the io_attributes shall be returned in RET1
+ * and the page address of the mapping shall be returned in RET2.
+ *
+ * For this version of the spec, the tsbnum component of the given tsbid
+ * must be zero.
+ */
+#define HV_FAST_PCI_IOMMU_GETMAP	0xb2
+
+/* pci_iommu_getbypass()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_GETBYPASS
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	io_attributes
+ * RET0:	status
+ * RET1:	io_addr
+ * ERRORS:	EINVAL		Invalid devhandle/io_attributes
+ *		ENORADDR	Invalid real address
+ *		ENOTSUPPORTED	Function not supported in this implementation.
+ *
+ * Create a "special" mapping in the device described by the given devhandle,
+ * for the given real address and attributes.  Return the IO address in RET1
+ * if successful.
+ */
+#define HV_FAST_PCI_IOMMU_GETBYPASS	0xb3
+
+/* pci_config_get()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_CONFIG_GET
+ * ARG0:	devhandle
+ * ARG1:	pci_device
+ * ARG2:	pci_config_offset
+ * ARG3:	size
+ * RET0:	status
+ * RET1:	error_flag
+ * RET2:	data
+ * ERRORS:	EINVAL		Invalid devhandle/pci_device/offset/size
+ *		EBADALIGN	pci_config_offset not size aligned
+ *		ENOACCESS	Access to this offset is not permitted
+ *
+ * Read PCI configuration space for the adapter described by the given
+ * devhandle.  Read size (1, 2, or 4) bytes of data from the given
+ * pci_device, at pci_config_offset from the beginning of the device's
+ * configuration space.  If there was no error, RET1 is set to zero and
+ * RET2 is set to the data read.  Insignificant bits in RET2 are not
+ * guarenteed to have any specific value and therefore must be ignored.
+ *
+ * The data returned in RET2 is size based byte swapped.
+ *
+ * If an error occurs during the read, set RET1 to a non-zero value.  The
+ * given pci_config_offset must be 'size' aligned.
+ */
+#define HV_FAST_PCI_CONFIG_GET		0xb4
+
+/* pci_config_put()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_CONFIG_PUT
+ * ARG0:	devhandle
+ * ARG1:	pci_device
+ * ARG2:	pci_config_offset
+ * ARG3:	size
+ * ARG4:	data
+ * RET0:	status
+ * RET1:	error_flag
+ * ERRORS:	EINVAL		Invalid devhandle/pci_device/offset/size
+ *		EBADALIGN	pci_config_offset not size aligned
+ *		ENOACCESS	Access to this offset is not permitted
+ *
+ * Write PCI configuration space for the adapter described by the given
+ * devhandle.  Write size (1, 2, or 4) bytes of data in a single operation,
+ * at pci_config_offset from the beginning of the device's configuration
+ * space.  The data argument contains the data to be written to configuration
+ * space.  Prior to writing, the data is size based byte swapped.
+ *
+ * If an error occurs during the write access, do not generate an error
+ * report, do set RET1 to a non-zero value.  Otherwise RET1 is zero.
+ * The given pci_config_offset must be 'size' aligned.
+ *
+ * This function is permitted to read from offset zero in the configuration
+ * space described by the given pci_device if necessary to ensure that the
+ * write access to config space completes.
+ */
+#define HV_FAST_PCI_CONFIG_PUT		0xb5
+
+/* pci_peek()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_PEEK
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * RET0:	status
+ * RET1:	error_flag
+ * RET2:	data
+ * ERRORS:	EINVAL		Invalid devhandle or size
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *		ENOACCESS	Guest access prohibited
+ *
+ * Attempt to read the IO address given by the given devhandle, real address,
+ * and size.  Size must be 1, 2, 4, or 8.  The read is performed as a single
+ * access operation using the given size.  If an error occurs when reading
+ * from the given location, do not generate an error report, but return a
+ * non-zero value in RET1.  If the read was successful, return zero in RET1
+ * and return the actual data read in RET2.  The data returned is size based
+ * byte swapped.
+ *
+ * Non-significant bits in RET2 are not guarenteed to have any specific value
+ * and therefore must be ignored.  If RET1 is returned as non-zero, the data
+ * value is not guarenteed to have any specific value and should be ignored.
+ *
+ * The caller must have permission to read from the given devhandle, real
+ * address, which must be an IO address.  The argument real address must be a
+ * size aligned address.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_PEEK		0xb6
+
+/* pci_poke()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_POKE
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * ARG3:	data
+ * ARG4:	pci_device
+ * RET0:	status
+ * RET1:	error_flag
+ * ERRORS:	EINVAL		Invalid devhandle, size, or pci_device
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *		ENOACCESS	Guest access prohibited
+ *		ENOTSUPPORTED	Function is not supported by implementation
+ *
+ * Attempt to write data to the IO address given by the given devhandle,
+ * real address, and size.  Size must be 1, 2, 4, or 8.  The write is
+ * performed as a single access operation using the given size. Prior to
+ * writing the data is size based swapped.
+ *
+ * If an error occurs when writing to the given location, do not generate an
+ * error report, but return a non-zero value in RET1.  If the write was
+ * successful, return zero in RET1.
+ *
+ * pci_device describes the configuration address of the device being
+ * written to.  The implementation may safely read from offset 0 with
+ * the configuration space of the device described by devhandle and
+ * pci_device in order to guarantee that the write portion of the operation
+ * completes
+ *
+ * Any error that occurs due to the read shall be reported using the normal
+ * error reporting mechanisms .. the read error is not suppressed.
+ *
+ * The caller must have permission to write to the given devhandle, real
+ * address, which must be an IO address.  The argument real address must be a
+ * size aligned address.  The caller must have permission to read from
+ * the given devhandle, pci_device cofiguration space offset 0.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_POKE		0xb7
+
+/* pci_dma_sync()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_DMA_SYNC
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * ARG3:	io_sync_direction
+ * RET0:	status
+ * RET1:	#synced
+ * ERRORS:	EINVAL		Invalid devhandle or io_sync_direction
+ *		ENORADDR	Bad real address
+ *
+ * Synchronize a memory region described by the given real address and size,
+ * for the device defined by the given devhandle using the direction(s)
+ * defined by the given io_sync_direction.  The argument size is the size of
+ * the memory region in bytes.
+ *
+ * Return the actual number of bytes synchronized in the return value #synced,
+ * which may be less than or equal to the argument size.  If the return
+ * value #synced is less than size, the caller must continue to call this
+ * function with updated real address and size arguments until the entire
+ * memory region is synchronized.
+ */
+#define HV_FAST_PCI_DMA_SYNC		0xb8
+
+/* PCI MSI services.  */
+
+#define HV_MSITYPE_MSI32		0x00
+#define HV_MSITYPE_MSI64		0x01
+
+#define HV_MSIQSTATE_IDLE		0x00
+#define HV_MSIQSTATE_ERROR		0x01
+
+#define HV_MSIQ_INVALID			0x00
+#define HV_MSIQ_VALID			0x01
+
+#define HV_MSISTATE_IDLE		0x00
+#define HV_MSISTATE_DELIVERED		0x01
+
+#define HV_MSIVALID_INVALID		0x00
+#define HV_MSIVALID_VALID		0x01
+
+#define HV_PCIE_MSGTYPE_PME_MSG		0x18
+#define HV_PCIE_MSGTYPE_PME_ACK_MSG	0x1b
+#define HV_PCIE_MSGTYPE_CORR_MSG	0x30
+#define HV_PCIE_MSGTYPE_NONFATAL_MSG	0x31
+#define HV_PCIE_MSGTYPE_FATAL_MSG	0x33
+
+#define HV_MSG_INVALID			0x00
+#define HV_MSG_VALID			0x01
+
+/* pci_msiq_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_CONF
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	real address
+ * ARG3:	number of entries
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle, msiqid or nentries
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *
+ * Configure the MSI queue given by the devhandle and msiqid arguments,
+ * and to be placed at the given real address and be of the given
+ * number of entries.  The real address must be aligned exactly to match
+ * the queue size.  Each queue entry is 64-bytes long, so f.e. a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.  The MSI-EQ
+ * Head and Tail are initialized so that the MSI-EQ is 'empty'.
+ *
+ * Implementation Note: Certain implementations have fixed sized queues.  In
+ *                      that case, number of entries must contain the correct
+ *                      value.
+ */
+#define HV_FAST_PCI_MSIQ_CONF		0xc0
+
+/* pci_msiq_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_INFO
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	number of entries
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Return the configuration information for the MSI queue described
+ * by the given devhandle and msiqid.  The base address of the queue
+ * is returned in ARG1 and the number of entries is returned in ARG2.
+ * If the queue is unconfigured, the real address is undefined and the
+ * number of entries will be returned as zero.
+ */
+#define HV_FAST_PCI_MSIQ_INFO		0xc1
+
+/* pci_msiq_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqvalid	(HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETVALID	0xc2
+
+/* pci_msiq_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqvalid	(HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqvalid
+ *				value or MSI EQ is uninitialized
+ *
+ * Set the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETVALID	0xc3
+
+/* pci_msiq_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqstate	(HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETSTATE	0xc4
+
+/* pci_msiq_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqstate	(HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqstate
+ *				value or MSI EQ is uninitialized
+ *
+ * Set the state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETSTATE	0xc5
+
+/* pci_msiq_gethead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETHEAD
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqhead
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETHEAD	0xc6
+
+/* pci_msiq_sethead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_SETHEAD
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqhead
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqhead,
+ *				or MSI EQ is uninitialized
+ *
+ * Set the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_SETHEAD	0xc7
+
+/* pci_msiq_gettail()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETTAIL
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqtail
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue tail for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETTAIL	0xc8
+
+/* pci_msi_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msivalidstate
+ * ERRORS:	EINVAL		Invalid devhandle or msinum
+ *
+ * Get the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_GETVALID	0xc9
+
+/* pci_msi_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msivalidstate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msivalidstate
+ *
+ * Set the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETVALID	0xca
+
+/* pci_msi_getmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msiqid
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or MSI is unbound
+ *
+ * Get the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_GETMSIQ		0xcb
+
+/* pci_msi_setmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msitype
+ * ARG3:	msiqid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msiqid
+ *
+ * Set the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_SETMSIQ		0xcc
+
+/* pci_msi_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msistate
+ * ERRORS:	EINVAL		Invalid devhandle or msinum
+ *
+ * Get the state of the MSI defined by the given devhandle and msinum.
+ * If not initialized, return HV_MSISTATE_IDLE.
+ */
+#define HV_FAST_PCI_MSI_GETSTATE	0xcd
+
+/* pci_msi_setstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msistate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msistate
+ *
+ * Set the state of the MSI defined by the given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETSTATE	0xce
+
+/* pci_msg_getmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_GETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * RET0:	status
+ * RET1:	msiqid
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype
+ *
+ * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETMSIQ		0xd0
+
+/* pci_msg_setmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_SETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * ARG2:	msiqid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle, msgtype, or msiqid
+ *
+ * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETMSIQ		0xd1
+
+/* pci_msg_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * RET0:	status
+ * RET1:	msgvalidstate
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype
+ *
+ * Get the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETVALID	0xd2
+
+/* pci_msg_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * ARG2:	msgvalidstate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype or msgvalidstate
+ *
+ * Set the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETVALID	0xd3
+
+/* Logical Domain Channel services.  */
+
+#define LDC_CHANNEL_DOWN		0
+#define LDC_CHANNEL_UP			1
+#define LDC_CHANNEL_RESETTING		2
+
+/* ldc_tx_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_QCONF
+ * ARG0:	channel ID
+ * ARG1:	real address base of queue
+ * ARG2:	num entries in queue
+ * RET0:	status
+ *
+ * Configure transmit queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries.  Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size.  Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * Upon configuration of a valid transmit queue the head and tail
+ * pointers are set to a hypervisor specific identical value indicating
+ * that the queue initially is empty.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.  A transmit queue may be
+ * specified even in the event that the LDC is down (peer endpoint has no
+ * receive queue specified).  Transmission will begin as soon as the peer
+ * endpoint defines a receive queue.
+ *
+ * It is recommended that a guest wait for a transmit queue to empty prior
+ * to reconfiguring it, or un-configuring it.  Re or un-configuring of a
+ * non-empty transmit queue behaves exactly as defined above, however it
+ * is undefined as to how many of the pending entries in the original queue
+ * will be delivered prior to the re-configuration taking effect.
+ * Furthermore, as the queue configuration causes a reset of the head and
+ * tail pointers there is no way for a guest to determine how many entries
+ * have been sent after the configuration operation.
+ */
+#define HV_FAST_LDC_TX_QCONF		0xe0
+
+/* ldc_tx_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_QINFO
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	real address base of queue
+ * RET2:	num entries in queue
+ *
+ * Return the configuration info for the transmit queue of LDC endpoint
+ * defined by the given channel ID.  The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no transmit
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_TX_QINFO		0xe1
+
+/* ldc_tx_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_GET_STATE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	head offset
+ * RET2:	tail offset
+ * RET3:	channel state
+ *
+ * Return the transmit state, and the head and tail queue pointers, for
+ * the transmit queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the transmit queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_TX_GET_STATE	0xe2
+
+/* ldc_tx_set_qtail()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_SET_QTAIL
+ * ARG0:	channel ID
+ * ARG1:	tail offset
+ * RET0:	status
+ *
+ * Update the tail pointer for the transmit queue associated with the LDC
+ * endpoint defined by the given channel ID.  The tail offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to increase
+ * the number of pending entries on the transmit queue.  Any attempt to
+ * decrease the number of pending transmit queue entires is considered
+ * an invalid tail offset and will result in an EINVAL error.
+ *
+ * Since the tail of the transmit queue may not be moved backwards, the
+ * transmit queue may be flushed by configuring a new transmit queue,
+ * whereupon the hypervisor will configure the initial transmit head and
+ * tail pointers to be equal.
+ */
+#define HV_FAST_LDC_TX_SET_QTAIL	0xe3
+
+/* ldc_rx_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_QCONF
+ * ARG0:	channel ID
+ * ARG1:	real address base of queue
+ * ARG2:	num entries in queue
+ * RET0:	status
+ *
+ * Configure receive queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries.  Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size.  Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * If a valid receive queue is specified for a local endpoint the LDC is
+ * in the up state for the purpose of transmission to this endpoint.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.
+ *
+ * As receive queue configuration causes a reset of the queue's head and
+ * tail pointers there is no way for a gues to determine how many entries
+ * have been received between a preceeding ldc_get_rx_state() API call
+ * and the completion of the configuration operation.  It should be noted
+ * that datagram delivery is not guarenteed via domain channels anyway,
+ * and therefore any higher protocol should be resilient to datagram
+ * loss if necessary.  However, to overcome this specific race potential
+ * it is recommended, for example, that a higher level protocol be employed
+ * to ensure either retransmission, or ensure that no datagrams are pending
+ * on the peer endpoint's transmit queue prior to the configuration process.
+ */
+#define HV_FAST_LDC_RX_QCONF		0xe4
+
+/* ldc_rx_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_QINFO
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	real address base of queue
+ * RET2:	num entries in queue
+ *
+ * Return the configuration info for the receive queue of LDC endpoint
+ * defined by the given channel ID.  The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no receive
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_RX_QINFO		0xe5
+
+/* ldc_rx_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_GET_STATE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	head offset
+ * RET2:	tail offset
+ * RET3:	channel state
+ *
+ * Return the receive state, and the head and tail queue pointers, for
+ * the receive queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the receive queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_RX_GET_STATE	0xe6
+
+/* ldc_rx_set_qhead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_SET_QHEAD
+ * ARG0:	channel ID
+ * ARG1:	head offset
+ * RET0:	status
+ *
+ * Update the head pointer for the receive queue associated with the LDC
+ * endpoint defined by the given channel ID.  The head offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to decrease
+ * the number of pending entries on the receive queue.  Any attempt to
+ * increase the number of pending receive queue entires is considered
+ * an invalid head offset and will result in an EINVAL error.
+ *
+ * The receive queue may be flushed by setting the head offset equal
+ * to the current tail offset.
+ */
+#define HV_FAST_LDC_RX_SET_QHEAD	0xe7
+
+/* LDC Map Table Entry.  Each slot is defined by a translation table
+ * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
+ * hypervisor invalidation cookie.
+ */
+#define LDC_MTE_PADDR	0x0fffffffffffe000 /* pa[55:13]          */
+#define LDC_MTE_COPY_W	0x0000000000000400 /* copy write access  */
+#define LDC_MTE_COPY_R	0x0000000000000200 /* copy read access   */
+#define LDC_MTE_IOMMU_W	0x0000000000000100 /* IOMMU write access */
+#define LDC_MTE_IOMMU_R	0x0000000000000080 /* IOMMU read access  */
+#define LDC_MTE_EXEC	0x0000000000000040 /* execute            */
+#define LDC_MTE_WRITE	0x0000000000000020 /* read               */
+#define LDC_MTE_READ	0x0000000000000010 /* write              */
+#define LDC_MTE_SZALL	0x000000000000000f /* page size bits     */
+#define LDC_MTE_SZ16GB	0x0000000000000007 /* 16GB page          */
+#define LDC_MTE_SZ2GB	0x0000000000000006 /* 2GB page           */
+#define LDC_MTE_SZ256MB	0x0000000000000005 /* 256MB page         */
+#define LDC_MTE_SZ32MB	0x0000000000000004 /* 32MB page          */
+#define LDC_MTE_SZ4MB	0x0000000000000003 /* 4MB page           */
+#define LDC_MTE_SZ512K	0x0000000000000002 /* 512K page          */
+#define LDC_MTE_SZ64K	0x0000000000000001 /* 64K page           */
+#define LDC_MTE_SZ8K	0x0000000000000000 /* 8K page            */
+
+#ifndef __ASSEMBLY__
+struct ldc_mtable_entry {
+	unsigned long	mte;
+	unsigned long	cookie;
+};
+#endif
+
+/* ldc_set_map_table()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_SET_MAP_TABLE
+ * ARG0:	channel ID
+ * ARG1:	table real address
+ * ARG2:	num entries
+ * RET0:	status
+ *
+ * Register the MTE table at the given table real address, with the
+ * specified num entries, for the LDC indicated by the given channel
+ * ID.
+ */
+#define HV_FAST_LDC_SET_MAP_TABLE	0xea
+
+/* ldc_get_map_table()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_GET_MAP_TABLE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	table real address
+ * RET2:	num entries
+ *
+ * Return the configuration of the current mapping table registered
+ * for the given channel ID.
+ */
+#define HV_FAST_LDC_GET_MAP_TABLE	0xeb
+
+#define LDC_COPY_IN	0
+#define LDC_COPY_OUT	1
+
+/* ldc_copy()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_COPY
+ * ARG0:	channel ID
+ * ARG1:	LDC_COPY_* direction code
+ * ARG2:	target real address
+ * ARG3:	local real address
+ * ARG4:	length in bytes
+ * RET0:	status
+ * RET1:	actual length in bytes
+ */
+#define HV_FAST_LDC_COPY		0xec
+
+#define LDC_MEM_READ	1
+#define LDC_MEM_WRITE	2
+#define LDC_MEM_EXEC	4
+
+/* ldc_mapin()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_MAPIN
+ * ARG0:	channel ID
+ * ARG1:	cookie
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	LDC_MEM_* permissions
+ */
+#define HV_FAST_LDC_MAPIN		0xed
+
+/* ldc_unmap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_UNMAP
+ * ARG0:	real address
+ * RET0:	status
+ */
+#define HV_FAST_LDC_UNMAP		0xee
+
+/* ldc_revoke()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_REVOKE
+ * ARG0:	channel ID
+ * ARG1:	cookie
+ * ARG2:	ldc_mtable_entry cookie
+ * RET0:	status
+ */
+#define HV_FAST_LDC_REVOKE		0xef
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
+					unsigned long ra,
+					unsigned long num_entries);
+extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
+					unsigned long *ra,
+					unsigned long *num_entries);
+extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
+					    unsigned long *head_off,
+					    unsigned long *tail_off,
+					    unsigned long *chan_state);
+extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
+					    unsigned long tail_off);
+extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
+					unsigned long ra,
+					unsigned long num_entries);
+extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
+					unsigned long *ra,
+					unsigned long *num_entries);
+extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
+					    unsigned long *head_off,
+					    unsigned long *tail_off,
+					    unsigned long *chan_state);
+extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
+					    unsigned long head_off);
+extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
+					     unsigned long ra,
+					     unsigned long num_entries);
+extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
+					     unsigned long *ra,
+					     unsigned long *num_entries);
+extern unsigned long sun4v_ldc_copy(unsigned long channel,
+				    unsigned long dir_code,
+				    unsigned long tgt_raddr,
+				    unsigned long lcl_raddr,
+				    unsigned long len,
+				    unsigned long *actual_len);
+extern unsigned long sun4v_ldc_mapin(unsigned long channel,
+				     unsigned long cookie,
+				     unsigned long *ra,
+				     unsigned long *perm);
+extern unsigned long sun4v_ldc_unmap(unsigned long ra);
+extern unsigned long sun4v_ldc_revoke(unsigned long channel,
+				      unsigned long cookie,
+				      unsigned long mte_cookie);
+#endif
+
+/* Performance counter services.  */
+
+#define HV_PERF_JBUS_PERF_CTRL_REG	0x00
+#define HV_PERF_JBUS_PERF_CNT_REG	0x01
+#define HV_PERF_DRAM_PERF_CTRL_REG_0	0x02
+#define HV_PERF_DRAM_PERF_CNT_REG_0	0x03
+#define HV_PERF_DRAM_PERF_CTRL_REG_1	0x04
+#define HV_PERF_DRAM_PERF_CNT_REG_1	0x05
+#define HV_PERF_DRAM_PERF_CTRL_REG_2	0x06
+#define HV_PERF_DRAM_PERF_CNT_REG_2	0x07
+#define HV_PERF_DRAM_PERF_CTRL_REG_3	0x08
+#define HV_PERF_DRAM_PERF_CNT_REG_3	0x09
+
+/* get_perfreg()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_GET_PERFREG
+ * ARG0:	performance reg number
+ * RET0:	status
+ * RET1:	performance reg value
+ * ERRORS:	EINVAL		Invalid performance register number
+ *		ENOACCESS	No access allowed to performance counters
+ *
+ * Read the value of the given DRAM/JBUS performance counter/control register.
+ */
+#define HV_FAST_GET_PERFREG		0x100
+
+/* set_perfreg()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SET_PERFREG
+ * ARG0:	performance reg number
+ * ARG1:	performance reg value
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid performance register number
+ *		ENOACCESS	No access allowed to performance counters
+ *
+ * Write the given performance reg value to the given DRAM/JBUS
+ * performance counter/control register.
+ */
+#define HV_FAST_SET_PERFREG		0x101
+
+/* MMU statistics services.
+ *
+ * The hypervisor maintains MMU statistics and privileged code provides
+ * a buffer where these statistics can be collected.  It is continually
+ * updated once configured.  The layout is as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_mmu_statistics {
+	unsigned long immu_tsb_hits_ctx0_8k_tte;
+	unsigned long immu_tsb_ticks_ctx0_8k_tte;
+	unsigned long immu_tsb_hits_ctx0_64k_tte;
+	unsigned long immu_tsb_ticks_ctx0_64k_tte;
+	unsigned long __reserved1[2];
+	unsigned long immu_tsb_hits_ctx0_4mb_tte;
+	unsigned long immu_tsb_ticks_ctx0_4mb_tte;
+	unsigned long __reserved2[2];
+	unsigned long immu_tsb_hits_ctx0_256mb_tte;
+	unsigned long immu_tsb_ticks_ctx0_256mb_tte;
+	unsigned long __reserved3[4];
+	unsigned long immu_tsb_hits_ctxnon0_8k_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
+	unsigned long immu_tsb_hits_ctxnon0_64k_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
+	unsigned long __reserved4[2];
+	unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
+	unsigned long __reserved5[2];
+	unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
+	unsigned long __reserved6[4];
+	unsigned long dmmu_tsb_hits_ctx0_8k_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
+	unsigned long dmmu_tsb_hits_ctx0_64k_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
+	unsigned long __reserved7[2];
+	unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
+	unsigned long __reserved8[2];
+	unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
+	unsigned long __reserved9[4];
+	unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
+	unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
+	unsigned long __reserved10[2];
+	unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
+	unsigned long __reserved11[2];
+	unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
+	unsigned long __reserved12[4];
+};
+#endif
+
+/* mmustat_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMUSTAT_CONF
+ * ARG0:	real address
+ * RET0:	status
+ * RET1:	real address
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Real address not aligned on 64-byte boundary
+ *		EBADTRAP	API not supported on this processor
+ *
+ * Enable MMU statistic gathering using the buffer at the given real
+ * address on the current virtual CPU.  The new buffer real address
+ * is given in ARG1, and the previously specified buffer real address
+ * is returned in RET1, or is returned as zero for the first invocation.
+ *
+ * If the passed in real address argument is zero, this will disable
+ * MMU statistic collection on the current virtual CPU.  If an error is
+ * returned then no statistics are collected.
+ *
+ * The buffer contents should be initialized to all zeros before being
+ * given to the hypervisor or else the statistics will be meaningless.
+ */
+#define HV_FAST_MMUSTAT_CONF		0x102
+
+/* mmustat_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMUSTAT_INFO
+ * RET0:	status
+ * RET1:	real address
+ * ERRORS:	EBADTRAP	API not supported on this processor
+ *
+ * Return the current state and real address of the currently configured
+ * MMU statistics buffer on the current virtual CPU.
+ */
+#define HV_FAST_MMUSTAT_INFO		0x103
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra);
+extern unsigned long sun4v_mmustat_info(unsigned long *ra);
+#endif
+
+/* NCS crypto services  */
+
+/* ncs_request() sub-function numbers */
+#define HV_NCS_QCONF			0x01
+#define HV_NCS_QTAIL_UPDATE		0x02
+
+#ifndef __ASSEMBLY__
+struct hv_ncs_queue_entry {
+	/* MAU Control Register */
+	unsigned long	mau_control;
+#define MAU_CONTROL_INV_PARITY	0x0000000000002000
+#define MAU_CONTROL_STRAND	0x0000000000001800
+#define MAU_CONTROL_BUSY	0x0000000000000400
+#define MAU_CONTROL_INT		0x0000000000000200
+#define MAU_CONTROL_OP		0x00000000000001c0
+#define MAU_CONTROL_OP_SHIFT	6
+#define MAU_OP_LOAD_MA_MEMORY	0x0
+#define MAU_OP_STORE_MA_MEMORY	0x1
+#define MAU_OP_MODULAR_MULT	0x2
+#define MAU_OP_MODULAR_REDUCE	0x3
+#define MAU_OP_MODULAR_EXP_LOOP	0x4
+#define MAU_CONTROL_LEN		0x000000000000003f
+#define MAU_CONTROL_LEN_SHIFT	0
+
+	/* Real address of bytes to load or store bytes
+	 * into/out-of the MAU.
+	 */
+	unsigned long	mau_mpa;
+
+	/* Modular Arithmetic MA Offset Register.  */
+	unsigned long	mau_ma;
+
+	/* Modular Arithmetic N Prime Register.  */
+	unsigned long	mau_np;
+};
+
+struct hv_ncs_qconf_arg {
+	unsigned long	mid;      /* MAU ID, 1 per core on Niagara */
+	unsigned long	base;     /* Real address base of queue */
+	unsigned long	end;	  /* Real address end of queue */
+	unsigned long	num_ents; /* Number of entries in queue */
+};
+
+struct hv_ncs_qtail_update_arg {
+	unsigned long	mid;      /* MAU ID, 1 per core on Niagara */
+	unsigned long	tail;     /* New tail index to use */
+	unsigned long	syncflag; /* only SYNCFLAG_SYNC is implemented */
+#define HV_NCS_SYNCFLAG_SYNC	0x00
+#define HV_NCS_SYNCFLAG_ASYNC	0x01
+};
+#endif
+
+/* ncs_request()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_NCS_REQUEST
+ * ARG0:	NCS sub-function
+ * ARG1:	sub-function argument real address
+ * ARG2:	size in bytes of sub-function argument
+ * RET0:	status
+ *
+ * The MAU chip of the Niagara processor is not directly accessible
+ * to privileged code, instead it is programmed indirectly via this
+ * hypervisor API.
+ *
+ * The interfaces defines a queue of MAU operations to perform.
+ * Privileged code registers a queue with the hypervisor by invoking
+ * this HVAPI with the HV_NCS_QCONF sub-function, which defines the
+ * base, end, and number of entries of the queue.  Each queue entry
+ * contains a MAU register struct block.
+ *
+ * The privileged code then proceeds to add entries to the queue and
+ * then invoke the HV_NCS_QTAIL_UPDATE sub-function.  Since only
+ * synchronous operations are supported by the current hypervisor,
+ * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to
+ * completion and return HV_EOK, or return an error code.
+ *
+ * The real address of the sub-function argument must be aligned on at
+ * least an 8-byte boundary.
+ *
+ * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte
+ * offset, into the queue and must be less than or equal the 'num_ents'
+ * argument given in the HV_NCS_QCONF call.
+ */
+#define HV_FAST_NCS_REQUEST		0x110
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ncs_request(unsigned long request,
+				       unsigned long arg_ra,
+				       unsigned long arg_size);
+#endif
+
+#define HV_FAST_FIRE_GET_PERFREG	0x120
+#define HV_FAST_FIRE_SET_PERFREG	0x121
+
+/* Function numbers for HV_CORE_TRAP.  */
+#define HV_CORE_SET_VER			0x00
+#define HV_CORE_PUTCHAR			0x01
+#define HV_CORE_EXIT			0x02
+#define HV_CORE_GET_VER			0x03
+
+/* Hypervisor API groups for use with HV_CORE_SET_VER and
+ * HV_CORE_GET_VER.
+ */
+#define HV_GRP_SUN4V			0x0000
+#define HV_GRP_CORE			0x0001
+#define HV_GRP_INTR			0x0002
+#define HV_GRP_SOFT_STATE		0x0003
+#define HV_GRP_PCI			0x0100
+#define HV_GRP_LDOM			0x0101
+#define HV_GRP_SVC_CHAN			0x0102
+#define HV_GRP_NCS			0x0103
+#define HV_GRP_RNG			0x0104
+#define HV_GRP_NIAG_PERF		0x0200
+#define HV_GRP_FIRE_PERF		0x0201
+#define HV_GRP_N2_CPU			0x0202
+#define HV_GRP_NIU			0x0204
+#define HV_GRP_VF_CPU			0x0205
+#define HV_GRP_DIAG			0x0300
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_get_version(unsigned long group,
+				       unsigned long *major,
+				       unsigned long *minor);
+extern unsigned long sun4v_set_version(unsigned long group,
+				       unsigned long major,
+				       unsigned long minor,
+				       unsigned long *actual_minor);
+
+extern int sun4v_hvapi_register(unsigned long group, unsigned long major,
+				unsigned long *minor);
+extern void sun4v_hvapi_unregister(unsigned long group);
+extern int sun4v_hvapi_get(unsigned long group,
+			   unsigned long *major,
+			   unsigned long *minor);
+extern void sun4v_hvapi_init(void);
+#endif
+
+#endif /* !(_SPARC64_HYPERVISOR_H) */
diff --git a/arch/sparc/include/asm/ide.h b/arch/sparc/include/asm/ide.h
new file mode 100644
index 00000000000..b7af3d65823
--- /dev/null
+++ b/arch/sparc/include/asm/ide.h
@@ -0,0 +1,97 @@
+/* ide.h: SPARC PCI specific IDE glue.
+ *
+ * Copyright (C) 1997  David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
+ * Adaptation from sparc64 version to sparc by Pete Zaitcev.
+ */
+
+#ifndef _SPARC_IDE_H
+#define _SPARC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+#ifdef CONFIG_SPARC64
+#include <asm/pgalloc.h>
+#include <asm/spitfire.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#else
+#include <asm/pgtable.h>
+#include <asm/psr.h>
+#endif
+
+#define __ide_insl(data_reg, buffer, wcount) \
+	__ide_insw(data_reg, buffer, (wcount)<<1)
+#define __ide_outsl(data_reg, buffer, wcount) \
+	__ide_outsw(data_reg, buffer, (wcount)<<1)
+
+/* On sparc, I/O ports and MMIO registers are accessed identically.  */
+#define __ide_mm_insw	__ide_insw
+#define __ide_mm_insl	__ide_insl
+#define __ide_mm_outsw	__ide_outsw
+#define __ide_mm_outsl	__ide_outsl
+
+static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	unsigned long end = (unsigned long)dst + (count << 1);
+#endif
+	u16 *ps = dst;
+	u32 *pi;
+
+	if(((unsigned long)ps) & 0x2) {
+		*ps++ = __raw_readw(port);
+		count--;
+	}
+	pi = (u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w  = __raw_readw(port) << 16;
+		w |= __raw_readw(port);
+		*pi++ = w;
+		count -= 2;
+	}
+	ps = (u16 *)pi;
+	if(count)
+		*ps++ = __raw_readw(port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	__flush_dcache_range((unsigned long)dst, end);
+#endif
+}
+
+static inline void __ide_outsw(void __iomem *port, const void *src, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	unsigned long end = (unsigned long)src + (count << 1);
+#endif
+	const u16 *ps = src;
+	const u32 *pi;
+
+	if(((unsigned long)src) & 0x2) {
+		__raw_writew(*ps++, port);
+		count--;
+	}
+	pi = (const u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w = *pi++;
+		__raw_writew((w >> 16), port);
+		__raw_writew(w, port);
+		count -= 2;
+	}
+	ps = (const u16 *)pi;
+	if(count)
+		__raw_writew(*ps, port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	__flush_dcache_range((unsigned long)src, end);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_IDE_H */
diff --git a/arch/sparc/include/asm/idprom.h b/arch/sparc/include/asm/idprom.h
new file mode 100644
index 00000000000..6976aa2439c
--- /dev/null
+++ b/arch/sparc/include/asm/idprom.h
@@ -0,0 +1,25 @@
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_IDPROM_H
+#define _SPARC_IDPROM_H
+
+#include <linux/types.h>
+
+struct idprom {
+	u8		id_format;	/* Format identifier (always 0x01) */
+	u8		id_machtype;	/* Machine type */
+	u8		id_ethaddr[6];	/* Hardware ethernet address */
+	s32		id_date;	/* Date of manufacture */
+	u32		id_sernum:24;	/* Unique serial number */
+	u8		id_cksum;	/* Checksum - xor of the data bytes */
+	u8		reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+#endif /* !(_SPARC_IDPROM_H) */
diff --git a/arch/sparc/include/asm/intr_queue.h b/arch/sparc/include/asm/intr_queue.h
new file mode 100644
index 00000000000..206077dedc2
--- /dev/null
+++ b/arch/sparc/include/asm/intr_queue.h
@@ -0,0 +1,15 @@
+#ifndef _SPARC64_INTR_QUEUE_H
+#define _SPARC64_INTR_QUEUE_H
+
+/* Sun4v interrupt queue registers, accessed via ASI_QUEUE.  */
+
+#define INTRQ_CPU_MONDO_HEAD	  0x3c0 /* CPU mondo head	          */
+#define INTRQ_CPU_MONDO_TAIL	  0x3c8 /* CPU mondo tail	          */
+#define INTRQ_DEVICE_MONDO_HEAD	  0x3d0 /* Device mondo head	          */
+#define INTRQ_DEVICE_MONDO_TAIL	  0x3d8 /* Device mondo tail	          */
+#define INTRQ_RESUM_MONDO_HEAD	  0x3e0 /* Resumable error mondo head     */
+#define INTRQ_RESUM_MONDO_TAIL	  0x3e8 /* Resumable error mondo tail     */
+#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */
+#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */
+
+#endif /* !(_SPARC64_INTR_QUEUE_H) */
diff --git a/arch/sparc/include/asm/io-unit.h b/arch/sparc/include/asm/io-unit.h
new file mode 100644
index 00000000000..96823b47fd4
--- /dev/null
+++ b/arch/sparc/include/asm/io-unit.h
@@ -0,0 +1,62 @@
+/* io-unit.h: Definitions for the sun4d IO-UNIT.
+ *
+ * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_IO_UNIT_H
+#define _SPARC_IO_UNIT_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/* The io-unit handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the xdbus so are
+ * translated by the on chip SRMMU.  The io-unit and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the io-unit handles all dvma sbus activity.
+ */
+ 
+/* AIEEE, unlike the nice sun4m, these monsters have 
+   fixed DMA range 64M */
+ 
+#define IOUNIT_DMA_BASE	    0xfc000000 /* TOP - 64M */
+#define IOUNIT_DMA_SIZE	    0x04000000 /* 64M */
+/* We use last 1M for sparc_dvma_malloc */
+#define IOUNIT_DVMA_SIZE    0x00100000 /* 1M */
+
+/* The format of an iopte in the external page tables */
+#define IOUPTE_PAGE          0xffffff00 /* Physical page number (PA[35:12])	*/
+#define IOUPTE_CACHE         0x00000080 /* Cached (in Viking/MXCC)		*/
+/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d.
+ * XXX Actually, all you should need to do is find out where the registers
+ * XXX are and copy over the sparc64 implementation I wrote.  There may be
+ * XXX some horrible hwbugs though, so be careful.  -DaveM
+ */
+#define IOUPTE_STREAM        0x00000040 /* Translation can use streaming cache	*/
+#define IOUPTE_INTRA	     0x00000008 /* SBUS direct slot->slot transfer	*/
+#define IOUPTE_WRITE         0x00000004 /* Writeable				*/
+#define IOUPTE_VALID         0x00000002 /* IOPTE is valid			*/
+#define IOUPTE_PARITY        0x00000001 /* Parity is checked during DVMA	*/
+
+struct iounit_struct {
+	unsigned long		bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)];
+	spinlock_t		lock;
+	iopte_t			*page_table;
+	unsigned long		rotor[3];
+	unsigned long		limit[4];
+};
+
+#define IOUNIT_BMAP1_START	0x00000000
+#define IOUNIT_BMAP1_END	(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1))
+#define IOUNIT_BMAP2_START	IOUNIT_BMAP1_END
+#define IOUNIT_BMAP2_END	IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2))
+#define IOUNIT_BMAPM_START	IOUNIT_BMAP2_END
+#define IOUNIT_BMAPM_END	((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
+
+extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
+#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
+extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
+
+#endif /* !(_SPARC_IO_UNIT_H) */
diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h
new file mode 100644
index 00000000000..a34b2994937
--- /dev/null
+++ b/arch/sparc/include/asm/io.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IO_H
+#define ___ASM_SPARC_IO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/io_64.h>
+#else
+#include <asm/io_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
new file mode 100644
index 00000000000..10d7da45007
--- /dev/null
+++ b/arch/sparc/include/asm/io_32.h
@@ -0,0 +1,326 @@
+#ifndef __SPARC_IO_H
+#define __SPARC_IO_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>  /* struct resource */
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+
+#define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
+
+static inline u32 flip_dword (u32 l)
+{
+	return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff);
+}
+
+static inline u16 flip_word (u16 w)
+{
+	return ((w&0xff) << 8) | ((w>>8)&0xff);
+}
+
+#define mmiowb()
+
+/*
+ * Memory mapped I/O to PCI
+ */
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile u16 *)addr;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile u32 *)addr;
+}
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void __raw_writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = w;
+}
+
+static inline void __raw_writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = l;
+}
+
+static inline u8 __readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __readw(const volatile void __iomem *addr)
+{
+	return flip_word(*(__force volatile u16 *)addr);
+}
+
+static inline u32 __readl(const volatile void __iomem *addr)
+{
+	return flip_dword(*(__force volatile u32 *)addr);
+}
+
+static inline void __writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void __writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = flip_word(w);
+}
+
+static inline void __writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = flip_dword(l);
+}
+
+#define readb(__addr)		__readb(__addr)
+#define readw(__addr)		__readw(__addr)
+#define readl(__addr)		__readl(__addr)
+#define readb_relaxed(__addr)	readb(__addr)
+#define readw_relaxed(__addr)	readw(__addr)
+#define readl_relaxed(__addr)	readl(__addr)
+
+#define writeb(__b, __addr)	__writeb((__b),(__addr))
+#define writew(__w, __addr)	__writew((__w),(__addr))
+#define writel(__l, __addr)	__writel((__l),(__addr))
+
+/*
+ * I/O space operations
+ *
+ * Arrangement on a Sun is somewhat complicated.
+ *
+ * First of all, we want to use standard Linux drivers
+ * for keyboard, PC serial, etc. These drivers think
+ * they access I/O space and use inb/outb.
+ * On the other hand, EBus bridge accepts PCI *memory*
+ * cycles and converts them into ISA *I/O* cycles.
+ * Ergo, we want inb & outb to generate PCI memory cycles.
+ *
+ * If we want to issue PCI *I/O* cycles, we do this
+ * with a low 64K fixed window in PCIC. This window gets
+ * mapped somewhere into virtual kernel space and we
+ * can use inb/outb again.
+ */
+#define inb_local(__addr)	__readb((void __iomem *)(unsigned long)(__addr))
+#define inb(__addr)		__readb((void __iomem *)(unsigned long)(__addr))
+#define inw(__addr)		__readw((void __iomem *)(unsigned long)(__addr))
+#define inl(__addr)		__readl((void __iomem *)(unsigned long)(__addr))
+
+#define outb_local(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outb(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outw(__w, __addr)	__writew(__w, (void __iomem *)(unsigned long)(__addr))
+#define outl(__l, __addr)	__writel(__l, (void __iomem *)(unsigned long)(__addr))
+
+#define inb_p(__addr)		inb(__addr)
+#define outb_p(__b, __addr)	outb(__b, __addr)
+#define inw_p(__addr)		inw(__addr)
+#define outw_p(__w, __addr)	outw(__w, __addr)
+#define inl_p(__addr)		inl(__addr)
+#define outl_p(__l, __addr)	outl(__l, __addr)
+
+void outsb(unsigned long addr, const void *src, unsigned long cnt);
+void outsw(unsigned long addr, const void *src, unsigned long cnt);
+void outsl(unsigned long addr, const void *src, unsigned long cnt);
+void insb(unsigned long addr, void *dst, unsigned long count);
+void insw(unsigned long addr, void *dst, unsigned long count);
+void insl(unsigned long addr, void *dst, unsigned long count);
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * SBus accessors.
+ *
+ * SBus has only one, memory mapped, I/O space.
+ * We do not need to flip bytes for SBus of course.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile u16 *)addr;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile u32 *)addr;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = w;
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = l;
+}
+
+/*
+ * The only reason for #define's is to hide casts to unsigned long.
+ */
+#define sbus_readb(__addr)		_sbus_readb(__addr)
+#define sbus_readw(__addr)		_sbus_readw(__addr)
+#define sbus_readl(__addr)		_sbus_readl(__addr)
+#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
+
+static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n)
+{
+	while(n--) {
+		sbus_writeb(c, __dst);
+		__dst++;
+	}
+}
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		writeb(c, d);
+		d++;
+	}
+}
+
+#define memset_io(d,c,sz)	_memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+	char *d = dst;
+
+	while (n--) {
+		char tmp = readb(src);
+		*d++ = tmp;
+		src++;
+	}
+}
+
+#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+	const char *s = src;
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		char tmp = *s++;
+		writeb(tmp, d);
+		d++;
+	}
+}
+
+#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
+
+#ifdef __KERNEL__
+
+/*
+ * Bus number may be embedded in the higher bits of the physical address.
+ * This is why we have no bus number argument to ioremap().
+ */
+extern void __iomem *ioremap(unsigned long offset, unsigned long size);
+#define ioremap_nocache(X,Y)	ioremap((X),(Y))
+#define ioremap_wc(X,Y)		ioremap((X),(Y))
+extern void iounmap(volatile void __iomem *addr);
+
+#define ioread8(X)			readb(X)
+#define ioread16(X)			readw(X)
+#define ioread32(X)			readl(X)
+#define iowrite8(val,X)			writeb(val,X)
+#define iowrite16(val,X)		writew(val,X)
+#define iowrite32(val,X)		writel(val,X)
+
+static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insb((unsigned long __force)port, buf, count);
+}
+static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insw((unsigned long __force)port, buf, count);
+}
+
+static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insl((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsb((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsw((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsl((unsigned long __force)port, buf, count);
+}
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/*
+ * Bus number may be in res->flags... somewhere.
+ */
+extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
+    unsigned long size, char *name);
+extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
+
+
+/*
+ * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
+ * so rtc_port is static in it. This should not change unless a new
+ * hardware pops up.
+ */
+#define RTC_PORT(x)   (rtc_port + (x))
+#define RTC_ALWAYS_BCD  0
+
+#endif
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* !(__SPARC_IO_H) */
diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h
new file mode 100644
index 00000000000..0bff078ffdd
--- /dev/null
+++ b/arch/sparc/include/asm/io_64.h
@@ -0,0 +1,511 @@
+#ifndef __SPARC64_IO_H
+#define __SPARC64_IO_H
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+#include <asm/asi.h>
+
+/* PC crapola... */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+/* BIO layer definitions. */
+extern unsigned long kern_base, kern_size;
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+static inline u8 _inb(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u16 _inw(unsigned long addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _inl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _outb(u8 b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _outw(u16 w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _outl(u32 l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+#define inb(__addr)		(_inb((unsigned long)(__addr)))
+#define inw(__addr)		(_inw((unsigned long)(__addr)))
+#define inl(__addr)		(_inl((unsigned long)(__addr)))
+#define outb(__b, __addr)	(_outb((u8)(__b), (unsigned long)(__addr)))
+#define outw(__w, __addr)	(_outw((u16)(__w), (unsigned long)(__addr)))
+#define outl(__l, __addr)	(_outl((u32)(__l), (unsigned long)(__addr)))
+
+#define inb_p(__addr) 		inb(__addr)
+#define outb_p(__b, __addr)	outb(__b, __addr)
+#define inw_p(__addr)		inw(__addr)
+#define outw_p(__w, __addr)	outw(__w, __addr)
+#define inl_p(__addr)		inl(__addr)
+#define outl_p(__l, __addr)	outl(__l, __addr)
+
+extern void outsb(unsigned long, const void *, unsigned long);
+extern void outsw(unsigned long, const void *, unsigned long);
+extern void outsl(unsigned long, const void *, unsigned long);
+extern void insb(unsigned long, void *, unsigned long);
+extern void insw(unsigned long, void *, unsigned long);
+extern void insl(unsigned long, void *, unsigned long);
+
+static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insb((unsigned long __force)port, buf, count);
+}
+static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insw((unsigned long __force)port, buf, count);
+}
+
+static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insl((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsb((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsw((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsl((unsigned long __force)port, buf, count);
+}
+
+/* Memory functions, same as I/O accesses on Ultra. */
+static inline u8 _readb(const volatile void __iomem *addr)
+{	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+	return ret;
+}
+
+static inline u16 _readw(const volatile void __iomem *addr)
+{	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _readl(const volatile void __iomem *addr)
+{	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u64 _readq(const volatile void __iomem *addr)
+{	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writew(u16 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writel(u32 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writeq(u64 q, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
+			     : /* no outputs */
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+#define readb(__addr)		_readb(__addr)
+#define readw(__addr)		_readw(__addr)
+#define readl(__addr)		_readl(__addr)
+#define readq(__addr)		_readq(__addr)
+#define readb_relaxed(__addr)	_readb(__addr)
+#define readw_relaxed(__addr)	_readw(__addr)
+#define readl_relaxed(__addr)	_readl(__addr)
+#define readq_relaxed(__addr)	_readq(__addr)
+#define writeb(__b, __addr)	_writeb(__b, __addr)
+#define writew(__w, __addr)	_writew(__w, __addr)
+#define writel(__l, __addr)	_writel(__l, __addr)
+#define writeq(__q, __addr)	_writeq(__q, __addr)
+
+/* Now versions without byte-swapping. */
+static inline u8 _raw_readb(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_raw_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u16 _raw_readw(unsigned long addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_raw_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u32 _raw_readl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_raw_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u64 _raw_readq(unsigned long addr)
+{
+	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_raw_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline void _raw_writeb(u8 b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_raw_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writew(u16 w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_raw_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writel(u32 l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writeq(u64 q, unsigned long addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */"
+			     : /* no outputs */
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define __raw_readb(__addr)		(_raw_readb((unsigned long)(__addr)))
+#define __raw_readw(__addr)		(_raw_readw((unsigned long)(__addr)))
+#define __raw_readl(__addr)		(_raw_readl((unsigned long)(__addr)))
+#define __raw_readq(__addr)		(_raw_readq((unsigned long)(__addr)))
+#define __raw_writeb(__b, __addr)	(_raw_writeb((u8)(__b), (unsigned long)(__addr)))
+#define __raw_writew(__w, __addr)	(_raw_writew((u16)(__w), (unsigned long)(__addr)))
+#define __raw_writel(__l, __addr)	(_raw_writel((u32)(__l), (unsigned long)(__addr)))
+#define __raw_writeq(__q, __addr)	(_raw_writeq((u64)(__q), (unsigned long)(__addr)))
+
+/* Valid I/O Space regions are anywhere, because each PCI bus supported
+ * can live in an arbitrary area of the physical address range.
+ */
+#define IO_SPACE_LIMIT 0xffffffffffffffffUL
+
+/* Now, SBUS variants, only difference from PCI is that we do
+ * not use little-endian ASIs.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u64 _sbus_readq(const volatile void __iomem *addr)
+{
+	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+#define sbus_readb(__addr)		_sbus_readb(__addr)
+#define sbus_readw(__addr)		_sbus_readw(__addr)
+#define sbus_readl(__addr)		_sbus_readl(__addr)
+#define sbus_readq(__addr)		_sbus_readq(__addr)
+#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
+#define sbus_writeq(__l, __addr)	_sbus_writeq(__l, __addr)
+
+static inline void _sbus_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	while(n--) {
+		sbus_writeb(c, dst);
+		dst++;
+	}
+}
+
+#define sbus_memset_io(d,c,sz)	_sbus_memset_io(d,c,sz)
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		writeb(c, d);
+		d++;
+	}
+}
+
+#define memset_io(d,c,sz)	_memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+	char *d = dst;
+
+	while (n--) {
+		char tmp = readb(src);
+		*d++ = tmp;
+		src++;
+	}
+}
+
+#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+	const char *s = src;
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		char tmp = *s++;
+		writeb(tmp, d);
+		d++;
+	}
+}
+
+#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
+
+#define mmiowb()
+
+#ifdef __KERNEL__
+
+/* On sparc64 we have the whole physical IO address space accessible
+ * using physically addressed loads and stores, so this does nothing.
+ */
+static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+{
+	return (void __iomem *)offset;
+}
+
+#define ioremap_nocache(X,Y)		ioremap((X),(Y))
+#define ioremap_wc(X,Y)			ioremap((X),(Y))
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+}
+
+#define ioread8(X)			readb(X)
+#define ioread16(X)			readw(X)
+#define ioread32(X)			readl(X)
+#define iowrite8(val,X)			writeb(val,X)
+#define iowrite16(val,X)		writew(val,X)
+#define iowrite32(val,X)		writel(val,X)
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/* Similarly for SBUS. */
+#define sbus_ioremap(__res, __offset, __size, __name) \
+({	unsigned long __ret; \
+	__ret  = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \
+	__ret += (unsigned long) (__offset); \
+	if (! request_region((__ret), (__size), (__name))) \
+		__ret = 0UL; \
+	(void __iomem *) __ret; \
+})
+
+#define sbus_iounmap(__addr, __size)	\
+	release_region((unsigned long)(__addr), (__size))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif
+
+#endif /* !(__SPARC64_IO_H) */
diff --git a/arch/sparc/include/asm/ioctl.h b/arch/sparc/include/asm/ioctl.h
new file mode 100644
index 00000000000..7d6bd51321b
--- /dev/null
+++ b/arch/sparc/include/asm/ioctl.h
@@ -0,0 +1,67 @@
+#ifndef _SPARC_IOCTL_H
+#define _SPARC_IOCTL_H
+
+/*
+ * Our DIR and SIZE overlap in order to simulteneously provide
+ * a non-zero _IOC_NONE (for binary compatibility) and
+ * 14 bits of size as on i386. Here's the layout:
+ *
+ *   0xE0000000   DIR
+ *   0x80000000     DIR = WRITE
+ *   0x40000000     DIR = READ
+ *   0x20000000     DIR = NONE
+ *   0x3FFF0000   SIZE (overlaps NONE bit)
+ *   0x0000FF00   TYPE
+ *   0x000000FF   NR (CMD)
+ */
+
+#define _IOC_NRBITS      8
+#define _IOC_TYPEBITS    8
+#define _IOC_SIZEBITS   13	/* Actually 14, see below. */
+#define _IOC_DIRBITS     3
+
+#define _IOC_NRMASK      ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK    ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK    ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_XSIZEMASK   ((1 << (_IOC_SIZEBITS+1))-1)
+#define _IOC_DIRMASK     ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT     0
+#define _IOC_TYPESHIFT   (_IOC_NRSHIFT + _IOC_NRBITS)
+#define _IOC_SIZESHIFT   (_IOC_TYPESHIFT + _IOC_TYPEBITS)
+#define _IOC_DIRSHIFT    (_IOC_SIZESHIFT + _IOC_SIZEBITS)
+
+#define _IOC_NONE        1U
+#define _IOC_READ        2U
+#define _IOC_WRITE       4U
+
+#define _IOC(dir,type,nr,size) \
+        (((dir)  << _IOC_DIRSHIFT) | \
+         ((type) << _IOC_TYPESHIFT) | \
+         ((nr)   << _IOC_NRSHIFT) | \
+         ((size) << _IOC_SIZESHIFT))
+
+#define _IO(type,nr)        _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)  _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)  _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* Used to decode ioctl numbers in drivers despite the leading underscore... */
+#define _IOC_DIR(nr)    \
+ ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)?   \
+                            (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)):  \
+                            (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
+#define _IOC_TYPE(nr)       (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)         (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)   \
+ ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)?    \
+                         0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
+
+/* ...and for the PCMCIA and sound. */
+#define IOC_IN          (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT         (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT       ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK    (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT   (_IOC_SIZESHIFT)
+
+#endif /* !(_SPARC_IOCTL_H) */
diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h
new file mode 100644
index 00000000000..1fe6855c5c1
--- /dev/null
+++ b/arch/sparc/include/asm/ioctls.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_SPARC_IOCTLS_H
+#define _ASM_SPARC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* Big T */
+#define TCGETA		_IOR('T', 1, struct termio)
+#define TCSETA		_IOW('T', 2, struct termio)
+#define TCSETAW		_IOW('T', 3, struct termio)
+#define TCSETAF		_IOW('T', 4, struct termio)
+#define TCSBRK		_IO('T', 5)
+#define TCXONC		_IO('T', 6)
+#define TCFLSH		_IO('T', 7)
+#define TCGETS		_IOR('T', 8, struct termios)
+#define TCSETS		_IOW('T', 9, struct termios)
+#define TCSETSW		_IOW('T', 10, struct termios)
+#define TCSETSF		_IOW('T', 11, struct termios)
+#define TCGETS2		_IOR('T', 12, struct termios2)
+#define TCSETS2		_IOW('T', 13, struct termios2)
+#define TCSETSW2	_IOW('T', 14, struct termios2)
+#define TCSETSF2	_IOW('T', 15, struct termios2)
+
+/* Note that all the ioctls that are not available in Linux have a 
+ * double underscore on the front to: a) avoid some programs to
+ * think we support some ioctls under Linux (autoconfiguration stuff)
+ */
+/* Little t */
+#define TIOCGETD	_IOR('t', 0, int)
+#define TIOCSETD	_IOW('t', 1, int)
+#define __TIOCHPCL        _IO('t', 2) /* SunOS Specific */
+#define __TIOCMODG        _IOR('t', 3, int) /* SunOS Specific */
+#define __TIOCMODS        _IOW('t', 4, int) /* SunOS Specific */
+#define __TIOCGETP        _IOR('t', 8, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETP        _IOW('t', 9, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETN        _IOW('t', 10, struct sgttyb) /* SunOS Specific */
+#define TIOCEXCL	_IO('t', 13)
+#define TIOCNXCL	_IO('t', 14)
+#define __TIOCFLUSH       _IOW('t', 16, int) /* SunOS Specific */
+#define __TIOCSETC        _IOW('t', 17, struct tchars) /* SunOS Specific */
+#define __TIOCGETC        _IOR('t', 18, struct tchars) /* SunOS Specific */
+#define __TIOCTCNTL       _IOW('t', 32, int) /* SunOS Specific */
+#define __TIOCSIGNAL      _IOW('t', 33, int) /* SunOS Specific */
+#define __TIOCSETX        _IOW('t', 34, int) /* SunOS Specific */
+#define __TIOCGETX        _IOR('t', 35, int) /* SunOS Specific */
+#define TIOCCONS	_IO('t', 36)
+#define TIOCGSOFTCAR	_IOR('t', 100, int)
+#define TIOCSSOFTCAR	_IOW('t', 101, int)
+#define __TIOCUCNTL       _IOW('t', 102, int) /* SunOS Specific */
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define __TIOCREMOTE      _IOW('t', 105, int) /* SunOS Specific */
+#define TIOCMGET	_IOR('t', 106, int)
+#define TIOCMBIC	_IOW('t', 107, int)
+#define TIOCMBIS	_IOW('t', 108, int)
+#define TIOCMSET	_IOW('t', 109, int)
+#define TIOCSTART       _IO('t', 110)
+#define TIOCSTOP        _IO('t', 111)
+#define TIOCPKT		_IOW('t', 112, int)
+#define TIOCNOTTY	_IO('t', 113)
+#define TIOCSTI		_IOW('t', 114, char)
+#define TIOCOUTQ	_IOR('t', 115, int)
+#define __TIOCGLTC        _IOR('t', 116, struct ltchars) /* SunOS Specific */
+#define __TIOCSLTC        _IOW('t', 117, struct ltchars) /* SunOS Specific */
+/* 118 is the non-posix setpgrp tty ioctl */
+/* 119 is the non-posix getpgrp tty ioctl */
+#define __TIOCCDTR        _IO('t', 120) /* SunOS Specific */
+#define __TIOCSDTR        _IO('t', 121) /* SunOS Specific */
+#define TIOCCBRK        _IO('t', 122)
+#define TIOCSBRK        _IO('t', 123)
+#define __TIOCLGET        _IOW('t', 124, int) /* SunOS Specific */
+#define __TIOCLSET        _IOW('t', 125, int) /* SunOS Specific */
+#define __TIOCLBIC        _IOW('t', 126, int) /* SunOS Specific */
+#define __TIOCLBIS        _IOW('t', 127, int) /* SunOS Specific */
+#define __TIOCISPACE      _IOR('t', 128, int) /* SunOS Specific */
+#define __TIOCISIZE       _IOR('t', 129, int) /* SunOS Specific */
+#define TIOCSPGRP	_IOW('t', 130, int)
+#define TIOCGPGRP	_IOR('t', 131, int)
+#define TIOCSCTTY	_IO('t', 132)
+#define TIOCGSID	_IOR('t', 133, int)
+/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
+#define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
+#define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
+
+/* Little f */
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
+ * someday.  This is completely bogus, I know...
+ */
+#define __TCGETSTAT       _IO('T', 200) /* Rutgers specific */
+#define __TCSETSTAT       _IO('T', 201) /* Rutgers specific */
+
+/* Linux specific, no SunOS equivalent. */
+#define TIOCLINUX	0x541C
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TCSBRKP		0x5425
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+#define TIOCMIWAIT	0x545C /* Wait for change on serial input line(s) */
+#define TIOCGICOUNT	0x545D /* Read serial port inline interrupt counts */
+
+/* Kernel definitions */
+#ifdef __KERNEL__
+#define TIOCGETC __TIOCGETC
+#define TIOCGETP __TIOCGETP
+#define TIOCGLTC __TIOCGLTC
+#define TIOCSLTC __TIOCSLTC
+#define TIOCSETP __TIOCSETP
+#define TIOCSETN __TIOCSETN
+#define TIOCSETC __TIOCSETC
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#endif /* !(_ASM_SPARC_IOCTLS_H) */
diff --git a/arch/sparc/include/asm/iommu.h b/arch/sparc/include/asm/iommu.h
new file mode 100644
index 00000000000..e650965b4a8
--- /dev/null
+++ b/arch/sparc/include/asm/iommu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IOMMU_H
+#define ___ASM_SPARC_IOMMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/iommu_64.h>
+#else
+#include <asm/iommu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/iommu_32.h b/arch/sparc/include/asm/iommu_32.h
new file mode 100644
index 00000000000..70c589c05a1
--- /dev/null
+++ b/arch/sparc/include/asm/iommu_32.h
@@ -0,0 +1,121 @@
+/* iommu.h: Definitions for the sun4m IOMMU.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_IOMMU_H
+#define _SPARC_IOMMU_H
+
+#include <asm/page.h>
+#include <asm/bitext.h>
+
+/* The iommu handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the mbus so are
+ * translated by the on chip SRMMU.  The iommu and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the iommu handles all dvma sbus activity.
+ */
+
+/* The IOMMU registers occupy three pages in IO space. */
+struct iommu_regs {
+	/* First page */
+	volatile unsigned long control;    /* IOMMU control */
+	volatile unsigned long base;       /* Physical base of iopte page table */
+	volatile unsigned long _unused1[3];
+	volatile unsigned long tlbflush;   /* write only */
+	volatile unsigned long pageflush;  /* write only */
+	volatile unsigned long _unused2[1017];
+	/* Second page */
+	volatile unsigned long afsr;       /* Async-fault status register */
+	volatile unsigned long afar;       /* Async-fault physical address */
+	volatile unsigned long _unused3[2];
+	volatile unsigned long sbuscfg0;   /* SBUS configuration registers, per-slot */
+	volatile unsigned long sbuscfg1;
+	volatile unsigned long sbuscfg2;
+	volatile unsigned long sbuscfg3;
+	volatile unsigned long mfsr;       /* Memory-fault status register */
+	volatile unsigned long mfar;       /* Memory-fault physical address */
+	volatile unsigned long _unused4[1014];
+	/* Third page */
+	volatile unsigned long mid;        /* IOMMU module-id */
+};
+
+#define IOMMU_CTRL_IMPL     0xf0000000 /* Implementation */
+#define IOMMU_CTRL_VERS     0x0f000000 /* Version */
+#define IOMMU_CTRL_RNGE     0x0000001c /* Mapping RANGE */
+#define IOMMU_RNGE_16MB     0x00000000 /* 0xff000000 -> 0xffffffff */
+#define IOMMU_RNGE_32MB     0x00000004 /* 0xfe000000 -> 0xffffffff */
+#define IOMMU_RNGE_64MB     0x00000008 /* 0xfc000000 -> 0xffffffff */
+#define IOMMU_RNGE_128MB    0x0000000c /* 0xf8000000 -> 0xffffffff */
+#define IOMMU_RNGE_256MB    0x00000010 /* 0xf0000000 -> 0xffffffff */
+#define IOMMU_RNGE_512MB    0x00000014 /* 0xe0000000 -> 0xffffffff */
+#define IOMMU_RNGE_1GB      0x00000018 /* 0xc0000000 -> 0xffffffff */
+#define IOMMU_RNGE_2GB      0x0000001c /* 0x80000000 -> 0xffffffff */
+#define IOMMU_CTRL_ENAB     0x00000001 /* IOMMU Enable */
+
+#define IOMMU_AFSR_ERR      0x80000000 /* LE, TO, or BE asserted */
+#define IOMMU_AFSR_LE       0x40000000 /* SBUS reports error after transaction */
+#define IOMMU_AFSR_TO       0x20000000 /* Write access took more than 12.8 us. */
+#define IOMMU_AFSR_BE       0x10000000 /* Write access received error acknowledge */
+#define IOMMU_AFSR_SIZE     0x0e000000 /* Size of transaction causing error */
+#define IOMMU_AFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_AFSR_RESV     0x00f00000 /* Reserver, forced to 0x8 by hardware */
+#define IOMMU_AFSR_ME       0x00080000 /* Multiple errors occurred */
+#define IOMMU_AFSR_RD       0x00040000 /* A read operation was in progress */
+#define IOMMU_AFSR_FAV      0x00020000 /* IOMMU afar has valid contents */
+
+#define IOMMU_SBCFG_SAB30   0x00010000 /* Phys-address bit 30 when bypass enabled */
+#define IOMMU_SBCFG_BA16    0x00000004 /* Slave supports 16 byte bursts */
+#define IOMMU_SBCFG_BA8     0x00000002 /* Slave supports 8 byte bursts */
+#define IOMMU_SBCFG_BYPASS  0x00000001 /* Bypass IOMMU, treat all addresses
+					  produced by this device as pure
+					  physical. */
+
+#define IOMMU_MFSR_ERR      0x80000000 /* One or more of PERR1 or PERR0 */
+#define IOMMU_MFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_MFSR_CPU      0x00800000 /* CPU transaction caused parity error */
+#define IOMMU_MFSR_ME       0x00080000 /* Multiple parity errors occurred */
+#define IOMMU_MFSR_PERR     0x00006000 /* high bit indicates parity error occurred
+					  on the even word of the access, low bit
+					  indicated odd word caused the parity error */
+#define IOMMU_MFSR_BM       0x00001000 /* Error occurred while in boot mode */
+#define IOMMU_MFSR_C        0x00000800 /* Address causing error was marked cacheable */
+#define IOMMU_MFSR_RTYP     0x000000f0 /* Memory request transaction type */
+
+#define IOMMU_MID_SBAE      0x001f0000 /* SBus arbitration enable */
+#define IOMMU_MID_SE        0x00100000 /* Enables SCSI/ETHERNET arbitration */
+#define IOMMU_MID_SB3       0x00080000 /* Enable SBUS device 3 arbitration */
+#define IOMMU_MID_SB2       0x00040000 /* Enable SBUS device 2 arbitration */
+#define IOMMU_MID_SB1       0x00020000 /* Enable SBUS device 1 arbitration */
+#define IOMMU_MID_SB0       0x00010000 /* Enable SBUS device 0 arbitration */
+#define IOMMU_MID_MID       0x0000000f /* Module-id, hardcoded to 0x8 */
+
+/* The format of an iopte in the page tables */
+#define IOPTE_PAGE          0x07ffff00 /* Physical page number (PA[30:12]) */
+#define IOPTE_CACHE         0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
+#define IOPTE_WRITE         0x00000004 /* Writeable */
+#define IOPTE_VALID         0x00000002 /* IOPTE is valid */
+#define IOPTE_WAZ           0x00000001 /* Write as zeros */
+
+struct iommu_struct {
+	struct iommu_regs *regs;
+	iopte_t *page_table;
+	/* For convenience */
+	unsigned long start; /* First managed virtual address */
+	unsigned long end;   /* Last managed virtual address */
+
+	struct bit_map usemap;
+};
+
+static inline void iommu_invalidate(struct iommu_regs *regs)
+{
+	regs->tlbflush = 0;
+}
+
+static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
+{
+	regs->pageflush = (ba & PAGE_MASK);
+}
+
+#endif /* !(_SPARC_IOMMU_H) */
diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h
new file mode 100644
index 00000000000..d7b9afcba08
--- /dev/null
+++ b/arch/sparc/include/asm/iommu_64.h
@@ -0,0 +1,62 @@
+/* iommu.h: Definitions for the sun5 IOMMU.
+ *
+ * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
+ */
+#ifndef _SPARC64_IOMMU_H
+#define _SPARC64_IOMMU_H
+
+/* The format of an iopte in the page tables. */
+#define IOPTE_VALID   0x8000000000000000UL
+#define IOPTE_64K     0x2000000000000000UL
+#define IOPTE_STBUF   0x1000000000000000UL
+#define IOPTE_INTRA   0x0800000000000000UL
+#define IOPTE_CONTEXT 0x07ff800000000000UL
+#define IOPTE_PAGE    0x00007fffffffe000UL
+#define IOPTE_CACHE   0x0000000000000010UL
+#define IOPTE_WRITE   0x0000000000000002UL
+
+#define IOMMU_NUM_CTXS	4096
+
+struct iommu_arena {
+	unsigned long	*map;
+	unsigned int	hint;
+	unsigned int	limit;
+};
+
+struct iommu {
+	spinlock_t		lock;
+	struct iommu_arena	arena;
+	void			(*flush_all)(struct iommu *);
+	iopte_t			*page_table;
+	u32			page_table_map_base;
+	unsigned long		iommu_control;
+	unsigned long		iommu_tsbbase;
+	unsigned long		iommu_flush;
+	unsigned long		iommu_flushinv;
+	unsigned long		iommu_tags;
+	unsigned long		iommu_ctxflush;
+	unsigned long		write_complete_reg;
+	unsigned long		dummy_page;
+	unsigned long		dummy_page_pa;
+	unsigned long		ctx_lowest_free;
+	DECLARE_BITMAP(ctx_bitmap, IOMMU_NUM_CTXS);
+	u32			dma_addr_mask;
+};
+
+struct strbuf {
+	int			strbuf_enabled;
+	unsigned long		strbuf_control;
+	unsigned long		strbuf_pflush;
+	unsigned long		strbuf_fsync;
+	unsigned long		strbuf_ctxflush;
+	unsigned long		strbuf_ctxmatch_base;
+	unsigned long		strbuf_flushflag_pa;
+	volatile unsigned long *strbuf_flushflag;
+	volatile unsigned long	__flushflag_buf[(64+(64-1)) / sizeof(long)];
+};
+
+extern int iommu_table_init(struct iommu *iommu, int tsbsize,
+			    u32 dma_offset, u32 dma_addr_mask,
+			    int numa_node);
+
+#endif /* !(_SPARC64_IOMMU_H) */
diff --git a/arch/sparc/include/asm/ipcbuf.h b/arch/sparc/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..17d6ef7b23a
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IPCBUF_H
+#define ___ASM_SPARC_IPCBUF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ipcbuf_64.h>
+#else
+#include <asm/ipcbuf_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ipcbuf_32.h b/arch/sparc/include/asm/ipcbuf_32.h
new file mode 100644
index 00000000000..6387209518f
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf_32.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_IPCBUF_H
+#define _SPARC_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values (so that this structure matches
+ *				    sparc64 ipc64_perm)
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	unsigned short		__pad1;
+	__kernel_mode_t		mode;
+	unsigned short		__pad2;
+	unsigned short		seq;
+	unsigned long long	__unused1;
+	unsigned long long	__unused2;
+};
+
+#endif /* _SPARC_IPCBUF_H */
diff --git a/arch/sparc/include/asm/ipcbuf_64.h b/arch/sparc/include/asm/ipcbuf_64.h
new file mode 100644
index 00000000000..a44b855b98d
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf_64.h
@@ -0,0 +1,28 @@
+#ifndef _SPARC64_IPCBUF_H
+#define _SPARC64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	__pad1;
+	unsigned short	seq;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _SPARC64_IPCBUF_H */
diff --git a/arch/sparc/include/asm/irq.h b/arch/sparc/include/asm/irq.h
new file mode 100644
index 00000000000..3b44a6a1407
--- /dev/null
+++ b/arch/sparc/include/asm/irq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQ_H
+#define ___ASM_SPARC_IRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irq_64.h>
+#else
+#include <asm/irq_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irq_32.h b/arch/sparc/include/asm/irq_32.h
new file mode 100644
index 00000000000..fe205cc444b
--- /dev/null
+++ b/arch/sparc/include/asm/irq_32.h
@@ -0,0 +1,15 @@
+/* irq.h: IRQ registers on the Sparc.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC_IRQ_H
+#define _SPARC_IRQ_H
+
+#include <linux/interrupt.h>
+
+#define NR_IRQS    16
+
+#define irq_canonicalize(irq)	(irq)
+
+#endif
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
new file mode 100644
index 00000000000..e3dd9303643
--- /dev/null
+++ b/arch/sparc/include/asm/irq_64.h
@@ -0,0 +1,100 @@
+/* irq.h: IRQ registers on the 64-bit Sparc.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#ifndef _SPARC64_IRQ_H
+#define _SPARC64_IRQ_H
+
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <asm/pil.h>
+#include <asm/ptrace.h>
+
+/* IMAP/ICLR register defines */
+#define IMAP_VALID		0x80000000UL	/* IRQ Enabled		*/
+#define IMAP_TID_UPA		0x7c000000UL	/* UPA TargetID		*/
+#define IMAP_TID_JBUS		0x7c000000UL	/* JBUS TargetID	*/
+#define IMAP_TID_SHIFT		26
+#define IMAP_AID_SAFARI		0x7c000000UL	/* Safari AgentID	*/
+#define IMAP_AID_SHIFT		26
+#define IMAP_NID_SAFARI		0x03e00000UL	/* Safari NodeID	*/
+#define IMAP_NID_SHIFT		21
+#define IMAP_IGN		0x000007c0UL	/* IRQ Group Number	*/
+#define IMAP_INO		0x0000003fUL	/* IRQ Number		*/
+#define IMAP_INR		0x000007ffUL	/* Full interrupt number*/
+
+#define ICLR_IDLE		0x00000000UL	/* Idle state		*/
+#define ICLR_TRANSMIT		0x00000001UL	/* Transmit state	*/
+#define ICLR_PENDING		0x00000003UL	/* Pending state	*/
+
+/* The largest number of unique interrupt sources we support.
+ * If this needs to ever be larger than 255, you need to change
+ * the type of ino_bucket->virt_irq as appropriate.
+ *
+ * ino_bucket->virt_irq allocation is made during {sun4v_,}build_irq().
+ */
+#define NR_IRQS    255
+
+extern void irq_install_pre_handler(int virt_irq,
+				    void (*func)(unsigned int, void *, void *),
+				    void *arg1, void *arg2);
+#define irq_canonicalize(irq)	(irq)
+extern unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap);
+extern unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino);
+extern unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino);
+extern unsigned int sun4v_build_msi(u32 devhandle, unsigned int *virt_irq_p,
+				    unsigned int msi_devino_start,
+				    unsigned int msi_devino_end);
+extern void sun4v_destroy_msi(unsigned int virt_irq);
+extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p,
+				    unsigned int msi_devino_start,
+				    unsigned int msi_devino_end,
+				    unsigned long imap_base,
+				    unsigned long iclr_base);
+extern void sun4u_destroy_msi(unsigned int virt_irq);
+extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
+
+extern unsigned char virt_irq_alloc(unsigned int dev_handle,
+				    unsigned int dev_ino);
+#ifdef CONFIG_PCI_MSI
+extern void virt_irq_free(unsigned int virt_irq);
+#endif
+
+extern void __init init_IRQ(void);
+extern void fixup_irqs(void);
+
+static inline void set_softint(unsigned long bits)
+{
+	__asm__ __volatile__("wr	%0, 0x0, %%set_softint"
+			     : /* No outputs */
+			     : "r" (bits));
+}
+
+static inline void clear_softint(unsigned long bits)
+{
+	__asm__ __volatile__("wr	%0, 0x0, %%clear_softint"
+			     : /* No outputs */
+			     : "r" (bits));
+}
+
+static inline unsigned long get_softint(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd	%%softint, %0"
+			     : "=r" (retval));
+	return retval;
+}
+
+void __trigger_all_cpu_backtrace(void);
+#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+
+extern void *hardirq_stack[NR_CPUS];
+extern void *softirq_stack[NR_CPUS];
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#endif
diff --git a/arch/sparc/include/asm/irq_regs.h b/arch/sparc/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/sparc/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/sparc/include/asm/irqflags.h b/arch/sparc/include/asm/irqflags.h
new file mode 100644
index 00000000000..1e138632bd3
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQFLAGS_H
+#define ___ASM_SPARC_IRQFLAGS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irqflags_64.h>
+#else
+#include <asm/irqflags_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h
new file mode 100644
index 00000000000..0fca9d97d44
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_32.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+extern void raw_local_irq_restore(unsigned long);
+extern unsigned long __raw_local_irq_save(void);
+extern void raw_local_irq_enable(void);
+
+static inline unsigned long getipl(void)
+{
+        unsigned long retval;
+
+        __asm__ __volatile__("rd        %%psr, %0" : "=r" (retval));
+        return retval;
+}
+
+#define raw_local_save_flags(flags) ((flags) = getipl())
+#define raw_local_irq_save(flags)   ((flags) = __raw_local_irq_save())
+#define raw_local_irq_disable()     ((void) __raw_local_irq_save())
+#define raw_irqs_disabled()         ((getipl() & PSR_PIL) != 0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+        return ((flags & PSR_PIL) != 0);
+}
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h
new file mode 100644
index 00000000000..bb42e59162a
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_64.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__(
+		"rdpr	%%pil, %0"
+		: "=r" (flags)
+	);
+
+	return flags;
+}
+
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	__asm__ __volatile__(
+		"wrpr	%0, %%pil"
+		: /* no output */
+		: "r" (flags)
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"wrpr	15, %%pil"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	__asm__ __volatile__(
+		"wrpr	0, %%pil"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags > 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/jsflash.h b/arch/sparc/include/asm/jsflash.h
new file mode 100644
index 00000000000..3457f29bd73
--- /dev/null
+++ b/arch/sparc/include/asm/jsflash.h
@@ -0,0 +1,39 @@
+/*
+ * jsflash.h: OS Flash SIMM support for JavaStations.
+ *
+ * Copyright (C) 1999  Pete Zaitcev
+ */
+
+#ifndef _SPARC_JSFLASH_H
+#define _SPARC_JSFLASH_H
+
+#ifndef _SPARC_TYPES_H
+#include <asm/types.h>
+#endif
+
+/*
+ * Semantics of the offset is a full address.
+ * Hardcode it or get it from probe ioctl.
+ *
+ * We use full bus address, so that we would be
+ * automatically compatible with possible future systems.
+ */
+
+#define JSFLASH_IDENT   (('F'<<8)|54)
+struct jsflash_ident_arg {
+	__u64 off;                /* 0x20000000 is included */
+	__u32 size;
+	char name[32];		/* With trailing zero */
+};
+
+#define JSFLASH_ERASE   (('F'<<8)|55)
+/* Put 0 as argument, may be flags or sector number... */
+
+#define JSFLASH_PROGRAM (('F'<<8)|56)
+struct jsflash_program_arg {
+	__u64 data;		/* char* for sparc and sparc64 */
+	__u64 off;
+	__u32 size;
+};
+
+#endif /* _SPARC_JSFLASH_H */
diff --git a/arch/sparc/include/asm/kdebug.h b/arch/sparc/include/asm/kdebug.h
new file mode 100644
index 00000000000..8d12581ca38
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_KDEBUG_H
+#define ___ASM_SPARC_KDEBUG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/kdebug_64.h>
+#else
+#include <asm/kdebug_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h
new file mode 100644
index 00000000000..f69fe7d84b3
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug_32.h
@@ -0,0 +1,73 @@
+/*
+ * kdebug.h:  Defines and definitions for debugging the Linux kernel
+ *            under various kernel debuggers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_KDEBUG_H
+#define _SPARC_KDEBUG_H
+
+#include <asm/openprom.h>
+#include <asm/vaddrs.h>
+
+/* Breakpoints are enter through trap table entry 126.  So in sparc assembly
+ * if you want to drop into the debugger you do:
+ *
+ * t DEBUG_BP_TRAP
+ */
+
+#define DEBUG_BP_TRAP     126
+
+#ifndef __ASSEMBLY__
+/* The debug vector is passed in %o1 at boot time.  It is a pointer to
+ * a structure in the debuggers address space.  Here is its format.
+ */
+
+typedef unsigned int (*debugger_funct)(void);
+
+struct kernel_debug {
+	/* First the entry point into the debugger.  You jump here
+	 * to give control over to the debugger.
+	 */
+	unsigned long kdebug_entry;
+	unsigned long kdebug_trapme;   /* Figure out later... */
+	/* The following is the number of pages that the debugger has
+	 * taken from to total pool.
+	 */
+	unsigned long *kdebug_stolen_pages;
+	/* Ok, after you remap yourself and/or change the trap table
+	 * from what you were left with at boot time you have to call
+	 * this synchronization function so the debugger can check out
+	 * what you have done.
+	 */
+	debugger_funct teach_debugger;
+}; /* I think that is it... */
+
+extern struct kernel_debug *linux_dbvec;
+
+/* Use this macro in C-code to enter the debugger. */
+static inline void sp_enter_debugger(void)
+{
+	__asm__ __volatile__("jmpl %0, %%o7\n\t"
+			     "nop\n\t" : :
+			     "r" (linux_dbvec) : "o7", "memory");
+}
+
+#define SP_ENTER_DEBUGGER do { \
+	     if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \
+	       sp_enter_debugger(); \
+		       } while(0)
+
+enum die_val {
+	DIE_UNUSED,
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Some nice offset defines for assembler code. */
+#define KDEBUG_ENTRY_OFF    0x0
+#define KDEBUG_DUNNO_OFF    0x4
+#define KDEBUG_DUNNO2_OFF   0x8
+#define KDEBUG_TEACH_OFF    0xc
+
+#endif /* !(_SPARC_KDEBUG_H) */
diff --git a/arch/sparc/include/asm/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h
new file mode 100644
index 00000000000..f905b773235
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug_64.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_KDEBUG_H
+#define _SPARC64_KDEBUG_H
+
+struct pt_regs;
+
+extern void bad_trap(struct pt_regs *, long);
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_DEBUG,	/* ta 0x70 */
+	DIE_DEBUG_2,	/* ta 0x71 */
+	DIE_DIE,
+	DIE_TRAP,
+	DIE_TRAP_TL1,
+	DIE_CALL,
+};
+
+#endif
diff --git a/arch/sparc/include/asm/kgdb.h b/arch/sparc/include/asm/kgdb.h
new file mode 100644
index 00000000000..b6ef301d05b
--- /dev/null
+++ b/arch/sparc/include/asm/kgdb.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC_KGDB_H
+#define _SPARC_KGDB_H
+
+#ifdef CONFIG_SPARC32
+#define BUFMAX			2048
+#else
+#define BUFMAX			4096
+#endif
+
+enum regnames {
+	GDB_G0, GDB_G1, GDB_G2, GDB_G3, GDB_G4, GDB_G5, GDB_G6, GDB_G7,
+	GDB_O0, GDB_O1, GDB_O2, GDB_O3, GDB_O4, GDB_O5, GDB_SP, GDB_O7,
+	GDB_L0, GDB_L1, GDB_L2, GDB_L3, GDB_L4, GDB_L5, GDB_L6, GDB_L7,
+	GDB_I0, GDB_I1, GDB_I2, GDB_I3, GDB_I4, GDB_I5, GDB_FP, GDB_I7,
+	GDB_F0,
+	GDB_F31 = GDB_F0 + 31,
+#ifdef CONFIG_SPARC32
+	GDB_Y, GDB_PSR, GDB_WIM, GDB_TBR, GDB_PC, GDB_NPC,
+	GDB_FSR, GDB_CSR,
+#else
+	GDB_F32 = GDB_F0 + 32,
+	GDB_F62 = GDB_F32 + 15,
+	GDB_PC, GDB_NPC, GDB_STATE, GDB_FSR, GDB_FPRS, GDB_Y,
+#endif
+};
+
+#ifdef CONFIG_SPARC32
+#define NUMREGBYTES		((GDB_CSR + 1) * 4)
+#else
+#define NUMREGBYTES		((GDB_Y + 1) * 8)
+#endif
+
+extern void arch_kgdb_breakpoint(void);
+
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	1
+
+#endif /* _SPARC_KGDB_H */
diff --git a/arch/sparc/include/asm/kmap_types.h b/arch/sparc/include/asm/kmap_types.h
new file mode 100644
index 00000000000..602f5e034f7
--- /dev/null
+++ b/arch/sparc/include/asm/kmap_types.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/* Dummy header just to define km_type.  None of this
+ * is actually used on sparc.  -DaveM
+ */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/sparc/include/asm/kprobes.h b/arch/sparc/include/asm/kprobes.h
new file mode 100644
index 00000000000..5879d71afda
--- /dev/null
+++ b/arch/sparc/include/asm/kprobes.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_KPROBES_H
+#define _SPARC64_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+typedef u32 kprobe_opcode_t;
+
+#define BREAKPOINT_INSTRUCTION   0x91d02070 /* ta 0x70 */
+#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */
+#define MAX_INSN_SIZE 2
+
+#define kretprobe_blacklist_size 0
+
+#define arch_remove_kprobe(p)	do {} while (0)
+
+#define flush_insn_slot(p)		\
+do { 	flushi(&(p)->ainsn.insn[0]);	\
+	flushi(&(p)->ainsn.insn[1]);	\
+} while (0)
+
+void kretprobe_trampoline(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long orig_tnpc;
+	unsigned long orig_tstate_pil;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_orig_tnpc;
+	unsigned long kprobe_orig_tstate_pil;
+	struct pt_regs jprobe_saved_regs;
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+#endif /* _SPARC64_KPROBES_H */
diff --git a/arch/sparc/include/asm/ldc.h b/arch/sparc/include/asm/ldc.h
new file mode 100644
index 00000000000..bdb524a7b81
--- /dev/null
+++ b/arch/sparc/include/asm/ldc.h
@@ -0,0 +1,138 @@
+#ifndef _SPARC64_LDC_H
+#define _SPARC64_LDC_H
+
+#include <asm/hypervisor.h>
+
+extern int ldom_domaining_enabled;
+extern void ldom_set_var(const char *var, const char *value);
+extern void ldom_reboot(const char *boot_command);
+extern void ldom_power_off(void);
+
+/* The event handler will be evoked when link state changes
+ * or data becomes available on the receive side.
+ *
+ * For non-RAW links, if the LDC_EVENT_RESET event arrives the
+ * driver should reset all of it's internal state and reinvoke
+ * ldc_connect() to try and bring the link up again.
+ *
+ * For RAW links, ldc_connect() is not used.  Instead the driver
+ * just waits for the LDC_EVENT_UP event.
+ */
+struct ldc_channel_config {
+	void (*event)(void *arg, int event);
+
+	u32			mtu;
+	unsigned int		rx_irq;
+	unsigned int		tx_irq;
+	u8			mode;
+#define LDC_MODE_RAW		0x00
+#define LDC_MODE_UNRELIABLE	0x01
+#define LDC_MODE_RESERVED	0x02
+#define LDC_MODE_STREAM		0x03
+
+	u8			debug;
+#define LDC_DEBUG_HS		0x01
+#define LDC_DEBUG_STATE		0x02
+#define LDC_DEBUG_RX		0x04
+#define LDC_DEBUG_TX		0x08
+#define LDC_DEBUG_DATA		0x10
+};
+
+#define LDC_EVENT_RESET		0x01
+#define LDC_EVENT_UP		0x02
+#define LDC_EVENT_DATA_READY	0x04
+
+#define LDC_STATE_INVALID	0x00
+#define LDC_STATE_INIT		0x01
+#define LDC_STATE_BOUND		0x02
+#define LDC_STATE_READY		0x03
+#define LDC_STATE_CONNECTED	0x04
+
+struct ldc_channel;
+
+/* Allocate state for a channel.  */
+extern struct ldc_channel *ldc_alloc(unsigned long id,
+				     const struct ldc_channel_config *cfgp,
+				     void *event_arg);
+
+/* Shut down and free state for a channel.  */
+extern void ldc_free(struct ldc_channel *lp);
+
+/* Register TX and RX queues of the link with the hypervisor.  */
+extern int ldc_bind(struct ldc_channel *lp, const char *name);
+
+/* For non-RAW protocols we need to complete a handshake before
+ * communication can proceed.  ldc_connect() does that, if the
+ * handshake completes successfully, an LDC_EVENT_UP event will
+ * be sent up to the driver.
+ */
+extern int ldc_connect(struct ldc_channel *lp);
+extern int ldc_disconnect(struct ldc_channel *lp);
+
+extern int ldc_state(struct ldc_channel *lp);
+
+/* Read and write operations.  Only valid when the link is up.  */
+extern int ldc_write(struct ldc_channel *lp, const void *buf,
+		     unsigned int size);
+extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size);
+
+#define LDC_MAP_SHADOW	0x01
+#define LDC_MAP_DIRECT	0x02
+#define LDC_MAP_IO	0x04
+#define LDC_MAP_R	0x08
+#define LDC_MAP_W	0x10
+#define LDC_MAP_X	0x20
+#define LDC_MAP_RW	(LDC_MAP_R | LDC_MAP_W)
+#define LDC_MAP_RWX	(LDC_MAP_R | LDC_MAP_W | LDC_MAP_X)
+#define LDC_MAP_ALL	0x03f
+
+struct ldc_trans_cookie {
+	u64			cookie_addr;
+	u64			cookie_size;
+};
+
+struct scatterlist;
+extern int ldc_map_sg(struct ldc_channel *lp,
+		      struct scatterlist *sg, int num_sg,
+		      struct ldc_trans_cookie *cookies, int ncookies,
+		      unsigned int map_perm);
+
+extern int ldc_map_single(struct ldc_channel *lp,
+			  void *buf, unsigned int len,
+			  struct ldc_trans_cookie *cookies, int ncookies,
+			  unsigned int map_perm);
+
+extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies,
+		      int ncookies);
+
+extern int ldc_copy(struct ldc_channel *lp, int copy_dir,
+		    void *buf, unsigned int len, unsigned long offset,
+		    struct ldc_trans_cookie *cookies, int ncookies);
+
+static inline int ldc_get_dring_entry(struct ldc_channel *lp,
+				      void *buf, unsigned int len,
+				      unsigned long offset,
+				      struct ldc_trans_cookie *cookies,
+				      int ncookies)
+{
+	return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies);
+}
+
+static inline int ldc_put_dring_entry(struct ldc_channel *lp,
+				      void *buf, unsigned int len,
+				      unsigned long offset,
+				      struct ldc_trans_cookie *cookies,
+				      int ncookies)
+{
+	return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies);
+}
+
+extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len,
+				 struct ldc_trans_cookie *cookies,
+				 int *ncookies, unsigned int map_perm);
+
+extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf,
+			       unsigned int len,
+			       struct ldc_trans_cookie *cookies, int ncookies);
+
+#endif /* _SPARC64_LDC_H */
diff --git a/arch/sparc/include/asm/linkage.h b/arch/sparc/include/asm/linkage.h
new file mode 100644
index 00000000000..291c2d01c44
--- /dev/null
+++ b/arch/sparc/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h
new file mode 100644
index 00000000000..6a352cbcf52
--- /dev/null
+++ b/arch/sparc/include/asm/lmb.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT	0
+
+#endif /* !(_SPARC64_LMB_H) */
diff --git a/arch/sparc/include/asm/local.h b/arch/sparc/include/asm/local.h
new file mode 100644
index 00000000000..bc80815a435
--- /dev/null
+++ b/arch/sparc/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_LOCAL_H
+#define _SPARC_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif
diff --git a/arch/sparc/include/asm/lsu.h b/arch/sparc/include/asm/lsu.h
new file mode 100644
index 00000000000..7190f8de90a
--- /dev/null
+++ b/arch/sparc/include/asm/lsu.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_LSU_H
+#define _SPARC64_LSU_H
+
+#include <linux/const.h>
+
+/* LSU Control Register */
+#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/
+#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/
+#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/
+#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/
+#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/
+#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/
+#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables.     */
+#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable.         */
+#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable.  */
+#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable.       */
+#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/
+
+#endif /* !(_SPARC64_LSU_H) */
diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h
new file mode 100644
index 00000000000..c28c2f24879
--- /dev/null
+++ b/arch/sparc/include/asm/machines.h
@@ -0,0 +1,67 @@
+/*
+ * machines.h:  Defines for taking apart the machine type value in the
+ *              idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+	char *name;
+	unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+#define NUM_SUN_MACHINES   15
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ *  7    4 3    0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK  0xf0
+#define SM_SUN4       0x20
+#define SM_SUN4C      0x50
+#define SM_SUN4M      0x70
+#define SM_SUN4M_OBP  0x80
+
+#define SM_TYP_MASK   0x0f
+/* Sun4 machines */
+#define SM_4_260      0x01    /* Sun 4/200 series */
+#define SM_4_110      0x02    /* Sun 4/100 series */
+#define SM_4_330      0x03    /* Sun 4/300 series */
+#define SM_4_470      0x04    /* Sun 4/400 series */
+
+/* Sun4c machines                Full Name              - PROM NAME */
+#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
+#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
+#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
+#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
+#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
+#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
+#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
+
+/* Sun4m machines, these predate the OpenBoot.  These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
+#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
+#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
diff --git a/arch/sparc/include/asm/mbus.h b/arch/sparc/include/asm/mbus.h
new file mode 100644
index 00000000000..69f07a022ee
--- /dev/null
+++ b/arch/sparc/include/asm/mbus.h
@@ -0,0 +1,100 @@
+/*
+ * mbus.h:  Various defines for MBUS modules.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MBUS_H
+#define _SPARC_MBUS_H
+
+#include <asm/ross.h>    /* HyperSparc stuff */
+#include <asm/cypress.h> /* Cypress Chips */
+#include <asm/viking.h>  /* Ugh, bug city... */
+
+enum mbus_module {
+	HyperSparc        = 0,
+	Cypress           = 1,
+	Cypress_vE        = 2,
+	Cypress_vD        = 3,
+	Swift_ok          = 4,
+	Swift_bad_c       = 5,
+	Swift_lots_o_bugs = 6,
+	Tsunami           = 7,
+	Viking_12         = 8,
+	Viking_2x         = 9,
+	Viking_30         = 10,
+	Viking_35         = 11,
+	Viking_new        = 12,
+	TurboSparc	  = 13,
+	SRMMU_INVAL_MOD   = 14,
+};
+
+extern enum mbus_module srmmu_modtype;
+extern unsigned int viking_rev, swift_rev, cypress_rev;
+
+/* HW Mbus module bugs we have to deal with */
+#define HWBUG_COPYBACK_BROKEN        0x00000001
+#define HWBUG_ASIFLUSH_BROKEN        0x00000002
+#define HWBUG_VACFLUSH_BITROT        0x00000004
+#define HWBUG_KERN_ACCBROKEN         0x00000008
+#define HWBUG_KERN_CBITBROKEN        0x00000010
+#define HWBUG_MODIFIED_BITROT        0x00000020
+#define HWBUG_PC_BADFAULT_ADDR       0x00000040
+#define HWBUG_SUPERSCALAR_BAD        0x00000080
+#define HWBUG_PACINIT_BITROT         0x00000100
+
+/* First the module type values. To find out which you have, just load
+ * the mmu control register from ASI_M_MMUREG alternate address space and
+ * shift the value right 28 bits.
+ */
+/* IMPL field means the company which produced the chip. */
+#define MBUS_VIKING        0x4   /* bleech, Texas Instruments Module */
+#define MBUS_LSI           0x3   /* LSI Logics */
+#define MBUS_ROSS          0x1   /* Ross is nice */
+#define MBUS_FMI           0x0   /* Fujitsu Microelectronics/Swift */
+
+/* Ross Module versions */
+#define ROSS_604_REV_CDE        0x0   /* revisions c, d, and e */
+#define ROSS_604_REV_F          0x1   /* revision f */
+#define ROSS_605                0xf   /* revision a, a.1, and a.2 */
+#define ROSS_605_REV_B          0xe   /* revision b */
+
+/* TI Viking Module versions */
+#define VIKING_REV_12           0x1   /* Version 1.2 or SPARCclassic's CPU */
+#define VIKING_REV_2            0x2   /* Version 2.1, 2.2, 2.3, and 2.4 */
+#define VIKING_REV_30           0x3   /* Version 3.0 */
+#define VIKING_REV_35           0x4   /* Version 3.5 */
+
+/* LSI Logics. */
+#define LSI_L64815		0x0
+
+/* Fujitsu */
+#define FMI_AURORA		0x4   /* MB8690x, a Swift module... */
+#define FMI_TURBO		0x5   /* MB86907, a TurboSparc module... */
+
+/* For multiprocessor support we need to be able to obtain the CPU id and
+ * the MBUS Module id.
+ */
+
+/* The CPU ID is encoded in the trap base register, 20 bits to the left of
+ * bit zero, with 2 bits being significant.
+ */
+#define TBR_ID_SHIFT            20
+
+static inline int get_cpuid(void)
+{
+	register int retval;
+	__asm__ __volatile__("rd %%tbr, %0\n\t"
+			     "srl %0, %1, %0\n\t" :
+			     "=r" (retval) :
+			     "i" (TBR_ID_SHIFT));
+	return (retval & 3);
+}
+
+static inline int get_modid(void)
+{
+	return (get_cpuid() | 0x8);
+}
+
+	
+#endif /* !(_SPARC_MBUS_H) */
diff --git a/arch/sparc/include/asm/mc146818rtc.h b/arch/sparc/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..67ed9e3a023
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MC146818RTC_H
+#define ___ASM_SPARC_MC146818RTC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mc146818rtc_64.h>
+#else
+#include <asm/mc146818rtc_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mc146818rtc_32.h b/arch/sparc/include/asm/mc146818rtc_32.h
new file mode 100644
index 00000000000..fa7eac92658
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc_32.h
@@ -0,0 +1,29 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC_MC146818RTC_H
+#define __ASM_SPARC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h
new file mode 100644
index 00000000000..e9c0fcc25c6
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc_64.h
@@ -0,0 +1,34 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC64_MC146818RTC_H
+#define __ASM_SPARC64_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#ifdef CONFIG_PCI
+extern unsigned long ds1287_regs;
+#else
+#define ds1287_regs (0UL)
+#endif
+#define RTC_PORT(x)	(ds1287_regs + (x))
+#define RTC_ALWAYS_BCD	0
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC64_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/mdesc.h b/arch/sparc/include/asm/mdesc.h
new file mode 100644
index 00000000000..1acc7272e53
--- /dev/null
+++ b/arch/sparc/include/asm/mdesc.h
@@ -0,0 +1,78 @@
+#ifndef _SPARC64_MDESC_H
+#define _SPARC64_MDESC_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/prom.h>
+
+struct mdesc_handle;
+
+/* Machine description operations are to be surrounded by grab and
+ * release calls.  The mdesc_handle returned from the grab is
+ * the first argument to all of the operational calls that work
+ * on mdescs.
+ */
+extern struct mdesc_handle *mdesc_grab(void);
+extern void mdesc_release(struct mdesc_handle *);
+
+#define MDESC_NODE_NULL		(~(u64)0)
+
+extern u64 mdesc_node_by_name(struct mdesc_handle *handle,
+			      u64 from_node, const char *name);
+#define mdesc_for_each_node_by_name(__hdl, __node, __name) \
+	for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \
+	     (__node) != MDESC_NODE_NULL; \
+	     __node = mdesc_node_by_name(__hdl, __node, __name))
+
+/* Access to property values returned from mdesc_get_property() are
+ * only valid inside of a mdesc_grab()/mdesc_release() sequence.
+ * Once mdesc_release() is called, the memory backed up by these
+ * pointers may reference freed up memory.
+ *
+ * Therefore callers must make copies of any property values
+ * they need.
+ *
+ * These same rules apply to mdesc_node_name().
+ */
+extern const void *mdesc_get_property(struct mdesc_handle *handle,
+				      u64 node, const char *name, int *lenp);
+extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node);
+
+/* MD arc iteration, the standard sequence is:
+ *
+ *	unsigned long arc;
+ *	mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) {
+ *		unsigned long target = mdesc_arc_target(handle, arc);
+ *		...
+ *	}
+ */
+
+#define MDESC_ARC_TYPE_FWD	"fwd"
+#define MDESC_ARC_TYPE_BACK	"back"
+
+extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from,
+			  const char *arc_type);
+#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \
+	for (__arc = mdesc_next_arc(__hdl, __node, __type); \
+	     (__arc) != MDESC_NODE_NULL; \
+	     __arc = mdesc_next_arc(__hdl, __arc, __type))
+
+extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc);
+
+extern void mdesc_update(void);
+
+struct mdesc_notifier_client {
+	void (*add)(struct mdesc_handle *handle, u64 node);
+	void (*remove)(struct mdesc_handle *handle, u64 node);
+
+	const char			*node_name;
+	struct mdesc_notifier_client	*next;
+};
+
+extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
+
+extern void mdesc_fill_in_cpu_data(cpumask_t mask);
+
+extern void sun4v_mdesc_init(void);
+
+#endif
diff --git a/arch/sparc/include/asm/memreg.h b/arch/sparc/include/asm/memreg.h
new file mode 100644
index 00000000000..845ad2b3918
--- /dev/null
+++ b/arch/sparc/include/asm/memreg.h
@@ -0,0 +1,51 @@
+#ifndef _SPARC_MEMREG_H
+#define _SPARC_MEMREG_H
+/* memreg.h:  Definitions of the values found in the synchronous
+ *            and asynchronous memory error registers when a fault
+ *            occurs on the sun4c.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* First the synchronous error codes, these are usually just
+ * normal page faults.
+ */
+
+#define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
+#define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
+#define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
+#define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
+#define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
+#define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
+#define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
+#define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
+
+#define SUN4C_SYNC_BOLIXED  \
+        (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
+         SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
+
+/* Now the asynchronous error codes, these are almost always produced
+ * by the cache writing things back to memory and getting a bad translation.
+ * Bad DVMA transactions can cause these faults too.
+ */
+
+#define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
+#define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
+#define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
+
+/* Memory parity error register with associated bit constants. */
+#ifndef __ASSEMBLY__
+extern __volatile__ unsigned long __iomem *sun4c_memerr_reg;
+#endif
+
+#define	SUN4C_MPE_ERROR	0x80	/* Parity error detected. (ro) */
+#define	SUN4C_MPE_MULTI	0x40	/* Multiple parity errors detected. (ro) */
+#define	SUN4C_MPE_TEST	0x20	/* Write inverse parity. (rw) */
+#define	SUN4C_MPE_CHECK	0x10	/* Enable parity checking. (rw) */
+#define	SUN4C_MPE_ERR00	0x08	/* Parity error in bits 0-7. (ro) */
+#define	SUN4C_MPE_ERR08	0x04	/* Parity error in bits 8-15. (ro) */
+#define	SUN4C_MPE_ERR16	0x02	/* Parity error in bits 16-23. (ro) */
+#define	SUN4C_MPE_ERR24	0x01	/* Parity error in bits 24-31. (ro) */
+#define	SUN4C_MPE_ERRS	0x0F	/* Bit mask for the error bits. (ro) */
+
+#endif /* !(_SPARC_MEMREG_H) */
diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
new file mode 100644
index 00000000000..fdfbbf0a473
--- /dev/null
+++ b/arch/sparc/include/asm/mman.h
@@ -0,0 +1,31 @@
+#ifndef __SPARC_MMAN_H__
+#define __SPARC_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+/* SunOS'ified... */
+
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_INHERIT     0x80            /* SunOS doesn't do this, but... */
+#define MAP_LOCKED      0x100           /* lock the mapping */
+#define _MAP_NEW        0x80000000      /* Binary compatibility is fun... */
+
+#define MAP_GROWSDOWN	0x0200		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check(addr,len,flags)	sparc_mmap_check(addr,len)
+int sparc_mmap_check(unsigned long addr, unsigned long len);
+#endif
+#endif
+
+#endif /* __SPARC_MMAN_H__ */
diff --git a/arch/sparc/include/asm/mmu.h b/arch/sparc/include/asm/mmu.h
new file mode 100644
index 00000000000..88fa313887d
--- /dev/null
+++ b/arch/sparc/include/asm/mmu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_H
+#define ___ASM_SPARC_MMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_64.h>
+#else
+#include <asm/mmu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mmu_32.h b/arch/sparc/include/asm/mmu_32.h
new file mode 100644
index 00000000000..ccd36d26615
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_32.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/arch/sparc/include/asm/mmu_64.h b/arch/sparc/include/asm/mmu_64.h
new file mode 100644
index 00000000000..9067dc50053
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_64.h
@@ -0,0 +1,123 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+#include <linux/const.h>
+#include <asm/page.h>
+#include <asm/hypervisor.h>
+
+#define CTX_NR_BITS		13
+
+#define TAG_CONTEXT_BITS	((_AC(1,UL) << CTX_NR_BITS) - _AC(1,UL))
+
+/* UltraSPARC-III+ and later have a feature whereby you can
+ * select what page size the various Data-TLB instances in the
+ * chip.  In order to gracefully support this, we put the version
+ * field in a spot outside of the areas of the context register
+ * where this parameter is specified.
+ */
+#define CTX_VERSION_SHIFT	22
+#define CTX_VERSION_MASK	((~0UL) << CTX_VERSION_SHIFT)
+
+#define CTX_PGSZ_8KB		_AC(0x0,UL)
+#define CTX_PGSZ_64KB		_AC(0x1,UL)
+#define CTX_PGSZ_512KB		_AC(0x2,UL)
+#define CTX_PGSZ_4MB		_AC(0x3,UL)
+#define CTX_PGSZ_BITS		_AC(0x7,UL)
+#define CTX_PGSZ0_NUC_SHIFT	61
+#define CTX_PGSZ1_NUC_SHIFT	58
+#define CTX_PGSZ0_SHIFT		16
+#define CTX_PGSZ1_SHIFT		19
+#define CTX_PGSZ_MASK		((CTX_PGSZ_BITS << CTX_PGSZ0_SHIFT) | \
+				 (CTX_PGSZ_BITS << CTX_PGSZ1_SHIFT))
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_8KB
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_64KB
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_4MB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_512KB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_64KB
+#endif
+
+#define CTX_PGSZ_KERN	CTX_PGSZ_4MB
+
+/* Thus, when running on UltraSPARC-III+ and later, we use the following
+ * PRIMARY_CONTEXT register values for the kernel context.
+ */
+#define CTX_CHEETAH_PLUS_NUC \
+	((CTX_PGSZ_KERN << CTX_PGSZ0_NUC_SHIFT) | \
+	 (CTX_PGSZ_BASE << CTX_PGSZ1_NUC_SHIFT))
+
+#define CTX_CHEETAH_PLUS_CTX0 \
+	((CTX_PGSZ_KERN << CTX_PGSZ0_SHIFT) | \
+	 (CTX_PGSZ_BASE << CTX_PGSZ1_SHIFT))
+
+/* If you want "the TLB context number" use CTX_NR_MASK.  If you
+ * want "the bits I program into the context registers" use
+ * CTX_HW_MASK.
+ */
+#define CTX_NR_MASK		TAG_CONTEXT_BITS
+#define CTX_HW_MASK		(CTX_NR_MASK | CTX_PGSZ_MASK)
+
+#define CTX_FIRST_VERSION	((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
+#define CTX_VALID(__ctx)	\
+	 (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
+#define CTX_HWBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
+#define CTX_NRBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_NR_MASK)
+
+#ifndef __ASSEMBLY__
+
+#define TSB_ENTRY_ALIGNMENT	16
+
+struct tsb {
+	unsigned long tag;
+	unsigned long pte;
+} __attribute__((aligned(TSB_ENTRY_ALIGNMENT)));
+
+extern void __tsb_insert(unsigned long ent, unsigned long tag, unsigned long pte);
+extern void tsb_flush(unsigned long ent, unsigned long tag);
+extern void tsb_init(struct tsb *tsb, unsigned long size);
+
+struct tsb_config {
+	struct tsb		*tsb;
+	unsigned long		tsb_rss_limit;
+	unsigned long		tsb_nentries;
+	unsigned long		tsb_reg_val;
+	unsigned long		tsb_map_vaddr;
+	unsigned long		tsb_map_pte;
+};
+
+#define MM_TSB_BASE	0
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define MM_TSB_HUGE	1
+#define MM_NUM_TSBS	2
+#else
+#define MM_NUM_TSBS	1
+#endif
+
+typedef struct {
+	spinlock_t		lock;
+	unsigned long		sparc64_ctx_val;
+	unsigned long		huge_pte_count;
+	struct tsb_config	tsb_block[MM_NUM_TSBS];
+	struct hv_tsb_descr	tsb_descr[MM_NUM_TSBS];
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#define TSB_CONFIG_TSB		0x00
+#define TSB_CONFIG_RSS_LIMIT	0x08
+#define TSB_CONFIG_NENTRIES	0x10
+#define TSB_CONFIG_REG_VAL	0x18
+#define TSB_CONFIG_MAP_VADDR	0x20
+#define TSB_CONFIG_MAP_PTE	0x28
+
+#endif /* __MMU_H */
diff --git a/arch/sparc/include/asm/mmu_context.h b/arch/sparc/include/asm/mmu_context.h
new file mode 100644
index 00000000000..5531346c64f
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_CONTEXT_H
+#define ___ASM_SPARC_MMU_CONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_context_64.h>
+#else
+#include <asm/mmu_context_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mmu_context_32.h b/arch/sparc/include/asm/mmu_context_32.h
new file mode 100644
index 00000000000..671a997b9e6
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context_32.h
@@ -0,0 +1,42 @@
+#ifndef __SPARC_MMU_CONTEXT_H
+#define __SPARC_MMU_CONTEXT_H
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * Initialize a new mmu context.  This is invoked when a new
+ * address space instance (unique or shared) is instantiated.
+ */
+#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * Destroy a dead context.  This occurs when mmput drops the
+ * mm_users count to zero, the mmaps have been released, and
+ * all the page tables have been flushed.  Our job is to destroy
+ * any remaining processor-specific state.
+ */
+BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *)
+
+#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm)
+
+/* Switch the current MM context. */
+BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *)
+
+#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk)
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_MMU_CONTEXT_H) */
diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h
new file mode 100644
index 00000000000..5693ab48260
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context_64.h
@@ -0,0 +1,155 @@
+#ifndef __SPARC64_MMU_CONTEXT_H
+#define __SPARC64_MMU_CONTEXT_H
+
+/* Derived heavily from Linus's Alpha/AXP ASN code... */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern spinlock_t ctx_alloc_lock;
+extern unsigned long tlb_context_cache;
+extern unsigned long mmu_context_bmap[];
+
+extern void get_new_mmu_context(struct mm_struct *mm);
+#ifdef CONFIG_SMP
+extern void smp_new_mmu_context_version(void);
+#else
+#define smp_new_mmu_context_version() do { } while (0)
+#endif
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void __tsb_context_switch(unsigned long pgd_pa,
+				 struct tsb_config *tsb_base,
+				 struct tsb_config *tsb_huge,
+				 unsigned long tsb_descr_pa);
+
+static inline void tsb_context_switch(struct mm_struct *mm)
+{
+	__tsb_context_switch(__pa(mm->pgd),
+			     &mm->context.tsb_block[0],
+#ifdef CONFIG_HUGETLB_PAGE
+			     (mm->context.tsb_block[1].tsb ?
+			      &mm->context.tsb_block[1] :
+			      NULL)
+#else
+			     NULL
+#endif
+			     , __pa(&mm->context.tsb_descr[0]));
+}
+
+extern void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long mm_rss);
+#ifdef CONFIG_SMP
+extern void smp_tsb_sync(struct mm_struct *mm);
+#else
+#define smp_tsb_sync(__mm) do { } while (0)
+#endif
+
+/* Set MMU context in the actual hardware. */
+#define load_secondary_context(__mm) \
+	__asm__ __volatile__( \
+	"\n661:	stxa		%0, [%1] %2\n" \
+	"	.section	.sun4v_1insn_patch, \"ax\"\n" \
+	"	.word		661b\n" \
+	"	stxa		%0, [%1] %3\n" \
+	"	.previous\n" \
+	"	flush		%%g6\n" \
+	: /* No outputs */ \
+	: "r" (CTX_HWBITS((__mm)->context)), \
+	  "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU), "i" (ASI_MMU))
+
+extern void __flush_tlb_mm(unsigned long, unsigned long);
+
+/* Switch the current MM context.  Interrupts are disabled.  */
+static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
+{
+	unsigned long ctx_valid, flags;
+	int cpu;
+
+	if (unlikely(mm == &init_mm))
+		return;
+
+	spin_lock_irqsave(&mm->context.lock, flags);
+	ctx_valid = CTX_VALID(mm->context);
+	if (!ctx_valid)
+		get_new_mmu_context(mm);
+
+	/* We have to be extremely careful here or else we will miss
+	 * a TSB grow if we switch back and forth between a kernel
+	 * thread and an address space which has it's TSB size increased
+	 * on another processor.
+	 *
+	 * It is possible to play some games in order to optimize the
+	 * switch, but the safest thing to do is to unconditionally
+	 * perform the secondary context load and the TSB context switch.
+	 *
+	 * For reference the bad case is, for address space "A":
+	 *
+	 *		CPU 0			CPU 1
+	 *	run address space A
+	 *	set cpu0's bits in cpu_vm_mask
+	 *	switch to kernel thread, borrow
+	 *	address space A via entry_lazy_tlb
+	 *					run address space A
+	 *					set cpu1's bit in cpu_vm_mask
+	 *					flush_tlb_pending()
+	 *					reset cpu_vm_mask to just cpu1
+	 *					TSB grow
+	 *	run address space A
+	 *	context was valid, so skip
+	 *	TSB context switch
+	 *
+	 * At that point cpu0 continues to use a stale TSB, the one from
+	 * before the TSB grow performed on cpu1.  cpu1 did not cross-call
+	 * cpu0 to update it's TSB because at that point the cpu_vm_mask
+	 * only had cpu1 set in it.
+	 */
+	load_secondary_context(mm);
+	tsb_context_switch(mm);
+
+	/* Any time a processor runs a context on an address space
+	 * for the first time, we must flush that context out of the
+	 * local TLB.
+	 */
+	cpu = smp_processor_id();
+	if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) {
+		cpu_set(cpu, mm->cpu_vm_mask);
+		__flush_tlb_mm(CTX_HWBITS(mm->context),
+			       SECONDARY_CONTEXT);
+	}
+	spin_unlock_irqrestore(&mm->context.lock, flags);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
+{
+	unsigned long flags;
+	int cpu;
+
+	spin_lock_irqsave(&mm->context.lock, flags);
+	if (!CTX_VALID(mm->context))
+		get_new_mmu_context(mm);
+	cpu = smp_processor_id();
+	if (!cpu_isset(cpu, mm->cpu_vm_mask))
+		cpu_set(cpu, mm->cpu_vm_mask);
+
+	load_secondary_context(mm);
+	__flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
+	tsb_context_switch(mm);
+	spin_unlock_irqrestore(&mm->context.lock, flags);
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_MMU_CONTEXT_H) */
diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h
new file mode 100644
index 00000000000..ebf5986c12e
--- /dev/null
+++ b/arch/sparc/include/asm/mmzone.h
@@ -0,0 +1,17 @@
+#ifndef _SPARC64_MMZONE_H
+#define _SPARC64_MMZONE_H
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data *node_data[];
+
+#define NODE_DATA(nid)		(node_data[nid])
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
+
+extern int numa_cpu_lookup_table[];
+extern cpumask_t numa_cpumask_lookup_table[];
+
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* _SPARC64_MMZONE_H */
diff --git a/arch/sparc/include/asm/module.h b/arch/sparc/include/asm/module.h
new file mode 100644
index 00000000000..e82cf9a3e60
--- /dev/null
+++ b/arch/sparc/include/asm/module.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MODULE_H
+#define ___ASM_SPARC_MODULE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/module_64.h>
+#else
+#include <asm/module_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/module_32.h b/arch/sparc/include/asm/module_32.h
new file mode 100644
index 00000000000..cbd9e67b0c0
--- /dev/null
+++ b/arch/sparc/include/asm/module_32.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC_MODULE_H
+#define _ASM_SPARC_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif /* _ASM_SPARC_MODULE_H */
diff --git a/arch/sparc/include/asm/module_64.h b/arch/sparc/include/asm/module_64.h
new file mode 100644
index 00000000000..3d77ba46578
--- /dev/null
+++ b/arch/sparc/include/asm/module_64.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC64_MODULE_H
+#define _ASM_SPARC64_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#endif /* _ASM_SPARC64_MODULE_H */
diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h
new file mode 100644
index 00000000000..433be3e0a69
--- /dev/null
+++ b/arch/sparc/include/asm/mostek.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MOSTEK_H
+#define ___ASM_SPARC_MOSTEK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mostek_64.h>
+#else
+#include <asm/mostek_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mostek_32.h b/arch/sparc/include/asm/mostek_32.h
new file mode 100644
index 00000000000..a99590c4c50
--- /dev/null
+++ b/arch/sparc/include/asm/mostek_32.h
@@ -0,0 +1,171 @@
+/*
+ * mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
+ */
+
+#ifndef _SPARC_MOSTEK_H
+#define _SPARC_MOSTEK_H
+
+#include <asm/idprom.h>
+#include <asm/io.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ */
+#define mostek_read(_addr)		readb(_addr)
+#define mostek_write(_addr,_val)	writeb(_val, _addr)
+#define MOSTEK_EEPROM		0x0000UL
+#define MOSTEK_IDPROM		0x07d8UL
+#define MOSTEK_CREG		0x07f8UL
+#define MOSTEK_SEC		0x07f9UL
+#define MOSTEK_MIN		0x07faUL
+#define MOSTEK_HOUR		0x07fbUL
+#define MOSTEK_DOW		0x07fcUL
+#define MOSTEK_DOM		0x07fdUL
+#define MOSTEK_MONTH		0x07feUL
+#define MOSTEK_YEAR		0x07ffUL
+
+struct mostek48t02 {
+	volatile char eeprom[2008];	/* This is the eeprom, don't touch! */
+	struct idprom idprom;		/* The idprom lives here. */
+	volatile unsigned char creg;	/* Control register */
+	volatile unsigned char sec;	/* Seconds (0-59) */
+	volatile unsigned char min;	/* Minutes (0-59) */
+	volatile unsigned char hour;	/* Hour (0-23) */
+	volatile unsigned char dow;	/* Day of the week (1-7) */
+	volatile unsigned char dom;	/* Day of the month (1-31) */
+	volatile unsigned char month;	/* Month of year (1-12) */
+	volatile unsigned char year;	/* Year (0-99) */
+};
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
+#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
+#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
+#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define	MSTK_SEC_MASK	0x7f
+#define	MSTK_MIN_MASK	0x7f
+#define	MSTK_HOUR_MASK	0x3f
+#define	MSTK_DOW_MASK	0x07
+#define	MSTK_DOM_MASK	0x3f
+#define	MSTK_MONTH_MASK	0x1f
+#define	MSTK_YEAR_MASK	0xffU
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
+#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define	MSTK_REG_CREG(regs)	(((struct mostek48t02 *)regs)->creg)
+#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,sec,SEC)
+#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,min,MIN)
+#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,hour,HOUR)
+#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,dow,DOW)
+#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,dom,DOM)
+#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,month,MONTH)
+#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,year,YEAR)
+
+#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,sec,value,SEC)
+#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,min,value,MIN)
+#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,hour,value,HOUR)
+#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,dow,value,DOW)
+#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,dom,value,DOM)
+#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,month,value,MONTH)
+#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,year,value,YEAR)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+struct mostek48t08 {
+	char offset[6*1024];         /* Magic things may be here, who knows? */
+	struct mostek48t02 regs;     /* Here is what we are interested in.   */
+};
+
+#ifdef CONFIG_SUN4
+enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
+INTERSIL, MSTK_INVALID };
+#else
+enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
+MSTK_INVALID };
+#endif
+
+#ifdef CONFIG_SUN4
+/* intersil on a sun 4/260 code  data from harris doc */
+struct intersil_dt {
+        volatile unsigned char int_csec;
+        volatile unsigned char int_hour;
+        volatile unsigned char int_min;
+        volatile unsigned char int_sec;
+        volatile unsigned char int_month;
+        volatile unsigned char int_day;
+        volatile unsigned char int_year;
+        volatile unsigned char int_dow;
+};
+
+struct intersil {
+	struct intersil_dt clk;
+	struct intersil_dt cmp;
+	volatile unsigned char int_intr_reg;
+	volatile unsigned char int_cmd_reg;
+};
+
+#define INTERSIL_STOP        0x0
+#define INTERSIL_START       0x8
+#define INTERSIL_INTR_DISABLE   0x0
+#define INTERSIL_INTR_ENABLE   0x10
+#define INTERSIL_32K		0x0
+#define INTERSIL_NORMAL		0x0
+#define INTERSIL_24H		0x4
+#define INTERSIL_INT_100HZ	0x2
+
+/* end of intersil info */
+#endif
+
+#endif /* !(_SPARC_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mostek_64.h b/arch/sparc/include/asm/mostek_64.h
new file mode 100644
index 00000000000..c5652de2ace
--- /dev/null
+++ b/arch/sparc/include/asm/mostek_64.h
@@ -0,0 +1,143 @@
+/* mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _SPARC64_MOSTEK_H
+#define _SPARC64_MOSTEK_H
+
+#include <asm/idprom.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ *
+ * We now deal with physical addresses for I/O to the chip. -DaveM
+ */
+static inline u8 mostek_read(void __iomem *addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba	[%1] %2, %0"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+	return ret;
+}
+
+static inline void mostek_write(void __iomem *addr, u8 val)
+{
+	__asm__ __volatile__("stba	%0, [%1] %2"
+			     : /* no outputs */
+			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define MOSTEK_EEPROM		0x0000UL
+#define MOSTEK_IDPROM		0x07d8UL
+#define MOSTEK_CREG		0x07f8UL
+#define MOSTEK_SEC		0x07f9UL
+#define MOSTEK_MIN		0x07faUL
+#define MOSTEK_HOUR		0x07fbUL
+#define MOSTEK_DOW		0x07fcUL
+#define MOSTEK_DOM		0x07fdUL
+#define MOSTEK_MONTH		0x07feUL
+#define MOSTEK_YEAR		0x07ffUL
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
+#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
+#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
+#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define	MSTK_SEC_MASK	0x7f
+#define	MSTK_MIN_MASK	0x7f
+#define	MSTK_HOUR_MASK	0x3f
+#define	MSTK_DOW_MASK	0x07
+#define	MSTK_DOM_MASK	0x3f
+#define	MSTK_MONTH_MASK	0x1f
+#define	MSTK_YEAR_MASK	0xffU
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,name)	\
+	(MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
+#define MSTK_SET(regs,name,value) \
+do {	u8 __val = mostek_read(regs + MOSTEK_ ## name); \
+	__val &= ~(MSTK_ ## name ## _MASK); \
+	__val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
+		  (MSTK_ ## name ## _MASK)); \
+	mostek_write(regs + MOSTEK_ ## name, __val); \
+} while(0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define	MSTK_REG_CREG(regs)	(mostek_read((regs) + MOSTEK_CREG))
+#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,SEC)
+#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,MIN)
+#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,HOUR)
+#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,DOW)
+#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,DOM)
+#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,MONTH)
+#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,YEAR)
+
+#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,SEC,value)
+#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,MIN,value)
+#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,HOUR,value)
+#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,DOW,value)
+#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,DOM,value)
+#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,MONTH,value)
+#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,YEAR,value)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+#define MOSTEK_48T08_OFFSET	0x0000UL	/* Lower NVRAM portions */
+#define MOSTEK_48T08_48T02	0x1800UL	/* Offset to 48T02 chip */
+
+/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
+ * clock chip definitions around just in case.
+ */
+#define MOSTEK_48T59_OFFSET	0x0000UL	/* Lower NVRAM portions */
+#define MOSTEK_48T59_48T02	0x1800UL	/* Offset to 48T02 chip */
+
+#endif /* !(_SPARC64_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
new file mode 100644
index 00000000000..f8423039b24
--- /dev/null
+++ b/arch/sparc/include/asm/mpmbox.h
@@ -0,0 +1,67 @@
+/*
+ * mpmbox.h:  Interface and defines for the OpenProm mailbox
+ *               facilities for MP machines under Linux.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MPMBOX_H
+#define _SPARC_MPMBOX_H
+
+/* The prom allocates, for each CPU on the machine an unsigned
+ * byte in physical ram.  You probe the device tree prom nodes
+ * for these values.  The purpose of this byte is to be able to
+ * pass messages from one cpu to another.
+ */
+
+/* These are the main message types we have to look for in our
+ * Cpu mailboxes, based upon these values we decide what course
+ * of action to take.
+ */
+
+/* The CPU is executing code in the kernel. */
+#define MAILBOX_ISRUNNING     0xf0
+
+/* Another CPU called romvec->pv_exit(), you should call
+ * prom_stopcpu() when you see this in your mailbox.
+ */
+#define MAILBOX_EXIT          0xfb
+
+/* Another CPU called romvec->pv_enter(), you should call
+ * prom_cpuidle() when this is seen.
+ */
+#define MAILBOX_GOSPIN        0xfc
+
+/* Another CPU has hit a breakpoint either into kadb or the prom
+ * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
+ * at this point.
+ */
+#define MAILBOX_BPT_SPIN      0xfd
+
+/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
+ * over so go call prom_stopcpu().
+ */
+#define MAILBOX_WDOG_STOP     0xfe
+
+#ifndef __ASSEMBLY__
+
+/* Handy macro's to determine a cpu's state. */
+
+/* Is the cpu still in Power On Self Test? */
+#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
+
+/* Is the cpu at the 'ok' prompt of the PROM? */
+#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
+
+/* Is the cpu spinning in the PROM? */
+#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
+
+/* Sanity check... This is junk mail, throw it out. */
+#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
+
+/* Is the cpu actively running an application/kernel-code? */
+#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/arch/sparc/include/asm/msgbuf.h b/arch/sparc/include/asm/msgbuf.h
new file mode 100644
index 00000000000..efc7cbe9788
--- /dev/null
+++ b/arch/sparc/include/asm/msgbuf.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC_MSGBUF_H
+#define _SPARC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	PADDING(__pad1)
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	PADDING(__pad2)
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	PADDING(__pad3)
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+#undef PADDING
+#endif /* _SPARC_MSGBUF_H */
diff --git a/arch/sparc/include/asm/msi.h b/arch/sparc/include/asm/msi.h
new file mode 100644
index 00000000000..724ca566705
--- /dev/null
+++ b/arch/sparc/include/asm/msi.h
@@ -0,0 +1,31 @@
+/*
+ * msi.h:  Defines specific to the MBus - Sbus - Interface.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_MSI_H
+#define _SPARC_MSI_H
+
+/*
+ * Locations of MSI Registers.
+ */
+#define MSI_MBUS_ARBEN	0xe0001008	/* MBus Arbiter Enable register */
+
+/*
+ * Useful bits in the MSI Registers.
+ */
+#define MSI_ASYNC_MODE  0x80000000	/* Operate the MSI asynchronously */
+
+
+static inline void msi_set_sync(void)
+{
+	__asm__ __volatile__ ("lda [%0] %1, %%g3\n\t"
+			      "andn %%g3, %2, %%g3\n\t"
+			      "sta %%g3, [%0] %1\n\t" : :
+			      "r" (MSI_MBUS_ARBEN),
+			      "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3");
+}
+
+#endif /* !(_SPARC_MSI_H) */
diff --git a/arch/sparc/include/asm/mutex.h b/arch/sparc/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/sparc/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/sparc/include/asm/mxcc.h b/arch/sparc/include/asm/mxcc.h
new file mode 100644
index 00000000000..c0517bd05bd
--- /dev/null
+++ b/arch/sparc/include/asm/mxcc.h
@@ -0,0 +1,137 @@
+/*
+ * mxcc.h:  Definitions of the Viking MXCC registers
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MXCC_H
+#define _SPARC_MXCC_H
+
+/* These registers are accessed through ASI 0x2. */
+#define MXCC_DATSTREAM       0x1C00000  /* Data stream register */
+#define MXCC_SRCSTREAM       0x1C00100  /* Source stream register */
+#define MXCC_DESSTREAM       0x1C00200  /* Destination stream register */
+#define MXCC_RMCOUNT         0x1C00300  /* Count of references and misses */
+#define MXCC_STEST           0x1C00804  /* Internal self-test */
+#define MXCC_CREG            0x1C00A04  /* Control register */
+#define MXCC_SREG            0x1C00B00  /* Status register */
+#define MXCC_RREG            0x1C00C04  /* Reset register */
+#define MXCC_EREG            0x1C00E00  /* Error code register */
+#define MXCC_PREG            0x1C00F04  /* Address port register */
+
+/* Some MXCC constants. */
+#define MXCC_STREAM_SIZE     0x20       /* Size in bytes of one stream r/w */
+
+/* The MXCC Control Register:
+ *
+ * ----------------------------------------------------------------------
+ * |                                   | RRC | RSV |PRE|MCE|PARE|ECE|RSV|
+ * ----------------------------------------------------------------------
+ *  31                              10    9    8-6   5   4    3   2  1-0
+ *
+ * RRC: Controls what you read from MXCC_RMCOUNT reg.
+ *      0=Misses 1=References
+ * PRE: Prefetch enable
+ * MCE: Multiple Command Enable
+ * PARE: Parity enable
+ * ECE: External cache enable
+ */
+
+#define MXCC_CTL_RRC   0x00000200
+#define MXCC_CTL_PRE   0x00000020
+#define MXCC_CTL_MCE   0x00000010
+#define MXCC_CTL_PARE  0x00000008
+#define MXCC_CTL_ECE   0x00000004
+
+/* The MXCC Error Register:
+ *
+ * --------------------------------------------------------
+ * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR|
+ * --------------------------------------------------------
+ *  31   30 29  28  27  26  25 24-15  14-7   6  5-3   2-0
+ *
+ * ME: Multiple Errors have occurred
+ * CE: Cache consistency Error
+ * PEW: Parity Error during a Write operation
+ * PEE: Parity Error involving the External cache
+ * ASE: ASynchronous Error
+ * EIV: This register is toast
+ * MOPC: MXCC Operation Code for instance causing error
+ * ECODE: The Error CODE
+ * PRIV: A privileged mode error? 0=no 1=yes
+ * HPADDR: High PhysicalADDRess bits (35-32)
+ */
+
+#define MXCC_ERR_ME     0x80000000
+#define MXCC_ERR_CE     0x20000000
+#define MXCC_ERR_PEW    0x10000000
+#define MXCC_ERR_PEE    0x08000000
+#define MXCC_ERR_ASE    0x04000000
+#define MXCC_ERR_EIV    0x02000000
+#define MXCC_ERR_MOPC   0x01FF8000
+#define MXCC_ERR_ECODE  0x00007F80
+#define MXCC_ERR_PRIV   0x00000040
+#define MXCC_ERR_HPADDR 0x0000000f
+
+/* The MXCC Port register:
+ *
+ * -----------------------------------------------------
+ * |                | MID |                            |
+ * -----------------------------------------------------
+ *  31            21 20-18 17                         0
+ *
+ * MID: The moduleID of the cpu your read this from.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline void mxcc_set_stream_src(unsigned long *paddr)
+{
+	unsigned long data0 = paddr[0];
+	unsigned long data1 = paddr[1];
+
+	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+			      "or %%g0, %1, %%g3\n\t"
+			      "stda %%g2, [%2] %3\n\t" : :
+			      "r" (data0), "r" (data1),
+			      "r" (MXCC_SRCSTREAM),
+			      "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+static inline void mxcc_set_stream_dst(unsigned long *paddr)
+{
+	unsigned long data0 = paddr[0];
+	unsigned long data1 = paddr[1];
+
+	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+			      "or %%g0, %1, %%g3\n\t"
+			      "stda %%g2, [%2] %3\n\t" : :
+			      "r" (data0), "r" (data1),
+			      "r" (MXCC_DESSTREAM),
+			      "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+static inline unsigned long mxcc_get_creg(void)
+{
+	unsigned long mxcc_control;
+
+	__asm__ __volatile__("set 0xffffffff, %%g2\n\t"
+			     "set 0xffffffff, %%g3\n\t"
+			     "stda %%g2, [%1] %2\n\t"
+			     "lda [%3] %2, %0\n\t" :
+			     "=r" (mxcc_control) :
+			     "r" (MXCC_EREG), "i" (ASI_M_MXCC),
+			     "r" (MXCC_CREG) : "g2", "g3");
+	return mxcc_control;
+}
+
+static inline void mxcc_set_creg(unsigned long mxcc_control)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (mxcc_control), "r" (MXCC_CREG),
+			     "i" (ASI_M_MXCC));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_MXCC_H) */
diff --git a/arch/sparc/include/asm/ns87303.h b/arch/sparc/include/asm/ns87303.h
new file mode 100644
index 00000000000..686defe6aaa
--- /dev/null
+++ b/arch/sparc/include/asm/ns87303.h
@@ -0,0 +1,118 @@
+/* ns87303.h: Configuration Register Description for the
+ *            National Semiconductor PC87303 (SuperIO).
+ *
+ * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_NS87303_H
+#define _SPARC_NS87303_H 1
+
+/*
+ * Control Register Index Values
+ */
+#define FER	0x00
+#define FAR	0x01
+#define PTR	0x02
+#define FCR	0x03
+#define PCR	0x04
+#define KRR	0x05
+#define PMC	0x06
+#define TUP	0x07
+#define SID	0x08
+#define ASC	0x09
+#define CS0CF0	0x0a
+#define CS0CF1	0x0b
+#define CS1CF0	0x0c
+#define CS1CF1	0x0d
+
+/* Function Enable Register (FER) bits */
+#define FER_EDM		0x10	/* Encoded Drive and Motor pin information   */
+
+/* Function Address Register (FAR) bits */
+#define FAR_LPT_MASK	0x03
+#define FAR_LPTB	0x00
+#define FAR_LPTA	0x01
+#define FAR_LPTC	0x02
+
+/* Power and Test Register (PTR) bits */
+#define PTR_LPTB_IRQ7	0x08
+#define PTR_LEVEL_IRQ	0x80	/* When not ECP/EPP: Use level IRQ           */
+#define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controlls direction */
+				/*               of the parallel port	     */
+
+/* Function Control Register (FCR) bits */
+#define FCR_LDE		0x10	/* Logical Drive Exchange                    */
+#define FCR_ZWS_ENA	0x20	/* Enable short host read/write in ECP/EPP   */
+
+/* Printer Control Register (PCR) bits */
+#define PCR_EPP_ENABLE	0x01
+#define PCR_EPP_IEEE	0x02	/* Enable EPP Version 1.9 (IEEE 1284)        */
+#define PCR_ECP_ENABLE	0x04
+#define PCR_ECP_CLK_ENA	0x08	/* If 0 ECP Clock is stopped on Power down   */
+#define PCR_IRQ_POLAR	0x20	/* If 0 IRQ is level high or negative pulse, */
+				/* if 1 polarity is inverted                 */
+#define PCR_IRQ_ODRAIN	0x40	/* If 1, IRQ is open drain                   */
+
+/* Tape UARTs and Parallel Port Config Register (TUP) bits */
+#define TUP_EPP_TIMO	0x02	/* Enable EPP timeout IRQ                    */
+
+/* Advanced SuperIO Config Register (ASC) bits */
+#define ASC_LPT_IRQ7	0x01	/* Always use IRQ7 for LPT                  */
+#define ASC_DRV2_SEL	0x02	/* Logical Drive Exchange controlled by TDR  */
+
+#define FER_RESERVED	0x00
+#define FAR_RESERVED	0x00
+#define PTR_RESERVED	0x73
+#define FCR_RESERVED	0xc4
+#define PCR_RESERVED	0x10
+#define KRR_RESERVED	0x00
+#define PMC_RESERVED	0x98
+#define TUP_RESERVED	0xfb
+#define SIP_RESERVED	0x00
+#define ASC_RESERVED	0x18
+#define CS0CF0_RESERVED	0x00
+#define CS0CF1_RESERVED	0x08
+#define CS1CF0_RESERVED	0x00
+#define CS1CF1_RESERVED	0x08
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+extern spinlock_t ns87303_lock;
+
+static inline int ns87303_modify(unsigned long port, unsigned int index,
+				     unsigned char clr, unsigned char set)
+{
+	static unsigned char reserved[] = {
+		FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
+		PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
+		SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
+		CS1CF0_RESERVED, CS1CF1_RESERVED
+	};
+	unsigned long flags;
+	unsigned char value;
+
+	if (index > 0x0d)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ns87303_lock, flags);
+
+	outb(index, port);
+	value = inb(port + 1);
+	value &= ~(reserved[index] | clr);
+	value |= set;
+	outb(value, port + 1);
+	outb(value, port + 1);
+
+	spin_unlock_irqrestore(&ns87303_lock, flags);
+
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_NS87303_H) */
diff --git a/arch/sparc/include/asm/obio.h b/arch/sparc/include/asm/obio.h
new file mode 100644
index 00000000000..1a7544ceb57
--- /dev/null
+++ b/arch/sparc/include/asm/obio.h
@@ -0,0 +1,249 @@
+/*
+ * obio.h:  Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_OBIO_H
+#define _SPARC_OBIO_H
+
+#include <asm/asi.h>
+
+/* This weird monster likes to use the very upper parts of
+   36bit PA for these things :) */
+   
+/* CSR space (for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xFE  |   DEVID    |                | XDBUS ID |                   |
+ *  ------------------------------------------------------------------------
+ *  35      28 27        20 19            10 9        8 7                 0
+ */
+   
+#define CSR_BASE_ADDR		0xe0000000
+#define CSR_CPU_SHIFT		(32 - 4 - 5)
+#define CSR_XDBUS_SHIFT		8
+
+#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT)
+
+/* ECSR space (not for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xF  | DEVID[7:1] |                			           |
+ *  ------------------------------------------------------------------------
+ *  35     32 31        25 24                 				  0
+ */
+   
+#define ECSR_BASE_ADDR		0x00000000
+#define ECSR_CPU_SHIFT		(32 - 5)
+#define ECSR_DEV_SHIFT		(32 - 8)
+
+#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT)
+#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) 
+
+/* Bus Watcher */
+#define BW_LOCAL_BASE		0xfff00000
+
+#define BW_CID			0x00000000
+#define BW_DBUS_CTRL		0x00000008
+#define BW_DBUS_DATA		0x00000010
+#define BW_CTRL			0x00001000
+#define BW_INTR_TABLE		0x00001040
+#define BW_INTR_TABLE_CLEAR	0x00001080
+#define BW_PRESCALER		0x000010c0
+#define BW_PTIMER_LIMIT		0x00002000
+#define BW_PTIMER_COUNTER2	0x00002004
+#define BW_PTIMER_NDLIMIT	0x00002008
+#define BW_PTIMER_CTRL		0x0000200c
+#define BW_PTIMER_COUNTER	0x00002010
+#define BW_TIMER_LIMIT		0x00003000
+#define BW_TIMER_COUNTER2	0x00003004
+#define BW_TIMER_NDLIMIT	0x00003008
+#define BW_TIMER_CTRL		0x0000300c
+#define BW_TIMER_COUNTER	0x00003010
+
+/* BW Control */
+#define BW_CTRL_USER_TIMER	0x00000004	/* Is User Timer Free run enabled */
+
+/* Boot Bus */
+#define BB_LOCAL_BASE		0xf0000000
+
+#define BB_STAT1		0x00100000
+#define BB_STAT2		0x00120000
+#define BB_STAT3		0x00140000
+#define BB_LEDS			0x002e0000
+
+/* Bits in BB_STAT2 */
+#define BB_STAT2_AC_INTR	0x04	/* Aiee! 5ms and power is gone... */
+#define BB_STAT2_TMP_INTR	0x10	/* My Penguins are burning. Are you able to smell it? */
+#define BB_STAT2_FAN_INTR	0x20	/* My fan refuses to work */
+#define BB_STAT2_PWR_INTR	0x40	/* On SC2000, one of the two ACs died. Ok, we go on... */
+#define BB_STAT2_MASK		(BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR)
+
+/* Cache Controller */
+#define CC_BASE		0x1F00000
+#define CC_DATSTREAM	0x1F00000  /* Data stream register */
+#define CC_DATSIZE	0x1F0003F  /* Size */
+#define CC_SRCSTREAM	0x1F00100  /* Source stream register */
+#define CC_DESSTREAM	0x1F00200  /* Destination stream register */
+#define CC_RMCOUNT	0x1F00300  /* Count of references and misses */
+#define CC_IPEN		0x1F00406  /* Pending Interrupts */
+#define CC_IMSK		0x1F00506  /* Interrupt Mask */
+#define CC_ICLR		0x1F00606  /* Clear pending Interrupts */
+#define CC_IGEN		0x1F00704  /* Generate Interrupt register */
+#define CC_STEST	0x1F00804  /* Internal self-test */
+#define CC_CREG		0x1F00A04  /* Control register */
+#define CC_SREG		0x1F00B00  /* Status register */
+#define CC_RREG		0x1F00C04  /* Reset register */
+#define CC_EREG		0x1F00E00  /* Error code register */
+#define CC_CID		0x1F00F04  /* Component ID */
+
+#ifndef __ASSEMBLY__
+
+static inline int bw_get_intr_mask(int sbus_level)
+{
+	int mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void bw_clear_intr_mask(int sbus_level, int mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned bw_get_prof_limit(int cpu)
+{
+	unsigned limit;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (limit) :
+			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+			      "i" (ASI_M_CTL));
+	return limit;
+}
+
+static inline void bw_set_prof_limit(int cpu, unsigned limit)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (limit),
+			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned bw_get_ctrl(int cpu)
+{
+	unsigned ctrl;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (ctrl) :
+			      "r" (CSR_BASE(cpu) + BW_CTRL),
+			      "i" (ASI_M_CTL));
+	return ctrl;
+}
+
+static inline void bw_set_ctrl(int cpu, unsigned ctrl)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (ctrl),
+			      "r" (CSR_BASE(cpu) + BW_CTRL),
+			      "i" (ASI_M_CTL));
+}
+
+extern unsigned char cpu_leds[32];
+
+static inline void show_leds(int cpuid)
+{
+	cpuid &= 0x1e;
+	__asm__ __volatile__ ("stba %0, [%1] %2" : :
+			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned cc_get_ipen(void)
+{
+	unsigned pending;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (pending) :
+			      "r" (CC_IPEN),
+			      "i" (ASI_M_MXCC));
+	return pending;
+}
+
+static inline void cc_set_iclr(unsigned clear)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (clear),
+			      "r" (CC_ICLR),
+			      "i" (ASI_M_MXCC));
+}
+
+static inline unsigned cc_get_imsk(void)
+{
+	unsigned mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (CC_IMSK),
+			      "i" (ASI_M_MXCC));
+	return mask;
+}
+
+static inline void cc_set_imsk(unsigned mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (CC_IMSK),
+			      "i" (ASI_M_MXCC));
+}
+
+static inline unsigned cc_get_imsk_other(int cpuid)
+{
+	unsigned mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void cc_set_imsk_other(int cpuid, unsigned mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
+			      "i" (ASI_M_CTL));
+}
+
+static inline void cc_set_igen(unsigned gen)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (gen),
+			      "r" (CC_IGEN),
+			      "i" (ASI_M_MXCC));
+}
+
+/* +-------+-------------+-----------+------------------------------------+
+ * | bcast |  devid      |   sid     |              levels mask           |
+ * +-------+-------------+-----------+------------------------------------+
+ *  31      30         23 22       15 14                                 0
+ */
+#define IGEN_MESSAGE(bcast, devid, sid, levels) \
+	(((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels))
+            
+static inline void sun4d_send_ipi(int cpu, int level)
+{
+	cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1)));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_OBIO_H) */
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
new file mode 100644
index 00000000000..bba777a416d
--- /dev/null
+++ b/arch/sparc/include/asm/of_device.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_SPARC_OF_DEVICE_H
+#define _ASM_SPARC_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <asm/openprom.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device
+{
+	struct device_node		*node;
+	struct device			dev;
+	struct resource			resource[PROMREG_MAX];
+	unsigned int			irqs[PROMINTR_MAX];
+	int				num_irqs;
+
+	void				*sysdata;
+
+	int				slot;
+	int				portid;
+	int				clock_freq;
+};
+
+extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
+extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SPARC_OF_DEVICE_H */
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
new file mode 100644
index 00000000000..2348ab90a57
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform.h
@@ -0,0 +1,21 @@
+#ifndef ___ASM_SPARC_OF_PLATFORM_H
+#define ___ASM_SPARC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *		by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type	of_platform_bus_type	/* for compatibility */
+
+#endif
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
new file mode 100644
index 00000000000..aaeae905ed3
--- /dev/null
+++ b/arch/sparc/include/asm/openprom.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPENPROM_H
+#define ___ASM_SPARC_OPENPROM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/openprom_64.h>
+#else
+#include <asm/openprom_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/openprom_32.h b/arch/sparc/include/asm/openprom_32.h
new file mode 100644
index 00000000000..8b1649f29ed
--- /dev/null
+++ b/arch/sparc/include/asm/openprom_32.h
@@ -0,0 +1,255 @@
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* Empirical constants... */
+#define	LINUX_OPPROM_MAGIC      0x10010407
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	char *start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     16
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    15
+
+struct linux_prom_registers {
+	unsigned int which_io;         /* is this in OBIO space? */
+	unsigned int phys_addr;        /* The physical address of this register */
+	unsigned int reg_size;         /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+	/*
+	 * We don't know what information this field contain.
+	 * We guess, PCI device function is in bits 15:8
+	 * So, ...
+	 */
+	unsigned int which_io;  /* Let it be which_io */
+
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
+	unsigned int child_phys_mid;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_assigned_addresses {
+	unsigned int which_io;
+
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_ebus_ranges {
+	unsigned int child_phys_hi;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_mid;
+	unsigned int parent_phys_lo;
+
+	unsigned int size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/arch/sparc/include/asm/openprom_64.h b/arch/sparc/include/asm/openprom_64.h
new file mode 100644
index 00000000000..b69e4a8c917
--- /dev/null
+++ b/arch/sparc/include/asm/openprom_64.h
@@ -0,0 +1,280 @@
+#ifndef __SPARC64_OPENPROM_H
+#define __SPARC64_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	unsigned start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     24
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    32
+
+struct linux_prom_registers {
+	unsigned which_io;	/* hi part of physical address			*/
+	unsigned phys_addr;	/* The physical address of this register	*/
+	int reg_size;		/* How many bytes does this register take up?	*/
+};
+
+struct linux_prom64_registers {
+	unsigned long phys_addr;
+	unsigned long reg_size;
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+struct linux_prom64_ranges {
+	unsigned long ot_child_base;		/* Bus feels this */
+	unsigned long ot_parent_base;		/* CPU looks from here */
+	unsigned long or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
+	unsigned int child_phys_mid;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_intmap {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+
+	unsigned int interrupt;
+
+	int          cnode;
+	unsigned int cinterrupt;
+};
+
+struct linux_prom_pci_intmask {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+	unsigned int interrupt;
+};
+
+struct linux_prom_ebus_ranges {
+	unsigned int child_phys_hi;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_mid;
+	unsigned int parent_phys_lo;
+
+	unsigned int size;
+};
+
+struct linux_prom_ebus_intmap {
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int interrupt;
+
+	int          cnode;
+	unsigned int cinterrupt;
+};
+
+struct linux_prom_ebus_intmask {
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+	unsigned int interrupt;
+};
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_OPENPROM_H) */
diff --git a/arch/sparc/include/asm/openpromio.h b/arch/sparc/include/asm/openpromio.h
new file mode 100644
index 00000000000..917fb8e9c63
--- /dev/null
+++ b/arch/sparc/include/asm/openpromio.h
@@ -0,0 +1,69 @@
+#ifndef	_SPARC_OPENPROMIO_H
+#define	_SPARC_OPENPROMIO_H
+
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * SunOS and Solaris /dev/openprom definitions. The ioctl values
+ * were chosen to be exactly equal to the SunOS equivalents.
+ */
+
+struct openpromio
+{
+	u_int	oprom_size;		/* Actual size of the oprom_array. */
+	char	oprom_array[1];		/* Holds property names and values. */
+};
+
+#define	OPROMMAXPARAM	4096		/* Maximum size of oprom_array. */
+
+#define	OPROMGETOPT		0x20004F01
+#define	OPROMSETOPT		0x20004F02
+#define	OPROMNXTOPT		0x20004F03
+#define	OPROMSETOPT2		0x20004F04
+#define	OPROMNEXT		0x20004F05
+#define	OPROMCHILD		0x20004F06
+#define	OPROMGETPROP		0x20004F07
+#define	OPROMNXTPROP		0x20004F08
+#define	OPROMU2P		0x20004F09
+#define	OPROMGETCONS		0x20004F0A
+#define	OPROMGETFBNAME		0x20004F0B
+#define	OPROMGETBOOTARGS	0x20004F0C
+/* Linux extensions */				/* Arguments in oprom_array: */
+#define OPROMSETCUR		0x20004FF0	/* int node - Sets current node */
+#define OPROMPCI2NODE		0x20004FF1	/* int pci_bus, pci_devfn - Sets current node to PCI device's node */
+#define OPROMPATH2NODE		0x20004FF2	/* char path[] - Set current node from fully qualified PROM path */
+
+/*
+ * Return values from OPROMGETCONS:
+ */
+
+#define OPROMCONS_NOT_WSCONS    0
+#define OPROMCONS_STDIN_IS_KBD  0x1     /* stdin device is kbd */
+#define OPROMCONS_STDOUT_IS_FB  0x2     /* stdout is a framebuffer */
+#define OPROMCONS_OPENPROM      0x4     /* supports openboot */
+
+
+/*
+ *  NetBSD/OpenBSD /dev/openprom definitions.
+ */
+
+struct opiocdesc
+{
+	int	op_nodeid;		/* PROM Node ID (value-result) */
+	int	op_namelen;		/* Length of op_name. */
+	char	__user *op_name;	/* Pointer to the property name. */
+	int	op_buflen;		/* Length of op_buf (value-result) */
+	char	__user *op_buf;		/* Pointer to buffer. */
+};
+
+#define	OPIOCGET	_IOWR('O', 1, struct opiocdesc)
+#define	OPIOCSET	_IOW('O', 2, struct opiocdesc)
+#define	OPIOCNEXTPROP	_IOWR('O', 3, struct opiocdesc)
+#define	OPIOCGETOPTNODE	_IOR('O', 4, int)
+#define	OPIOCGETNEXT	_IOWR('O', 5, int)
+#define	OPIOCGETCHILD	_IOWR('O', 6, int)
+
+#endif /* _SPARC_OPENPROMIO_H */
+
diff --git a/arch/sparc/include/asm/oplib.h b/arch/sparc/include/asm/oplib.h
new file mode 100644
index 00000000000..72e04e13a6b
--- /dev/null
+++ b/arch/sparc/include/asm/oplib.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPLIB_H
+#define ___ASM_SPARC_OPLIB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/oplib_64.h>
+#else
+#include <asm/oplib_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
new file mode 100644
index 00000000000..b2631da259e
--- /dev/null
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -0,0 +1,272 @@
+/*
+ * oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+	PROM_V0,      /* Original sun4c V0 prom */
+	PROM_V2,      /* sun4c and early sun4m V2 prom */
+	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
+	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
+	PROM_SUN4,    /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions.  Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+			 int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+			    int physical_segment);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int __must_check prom_getproperty(int thisnode, char *property,
+					 char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property, char *buffer);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(char *name);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+			int value_size);
+
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Apply promlib probes OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent,
+				      struct linux_prom_registers *sbusregs, int nregs);
+
+/* CPU probing helpers.  */
+int cpu_find_by_instance(int instance, int *prom_node, int *mid);
+int cpu_find_by_mid(int mid, int *prom_node);
+int cpu_get_hwmid(int prom_node);
+
+extern spinlock_t prom_lock;
+
+#endif /* !(__SPARC_OPLIB_H) */
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
new file mode 100644
index 00000000000..6d2c2ca9803
--- /dev/null
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -0,0 +1,322 @@
+/* oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC64_OPLIB_H
+#define __SPARC64_OPLIB_H
+
+#include <asm/openprom.h>
+
+/* OBP version string. */
+extern char prom_version[];
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* PROM stdin and stdout */
+extern int prom_stdin, prom_stdout;
+
+/* /chosen node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_chosen_node;
+
+/* Helper values and strings in arch/sparc64/kernel/head.S */
+extern const char prom_peer_name[];
+extern const char prom_compatible_name[];
+extern const char prom_root_compatible[];
+extern const char prom_cpu_compatible[];
+extern const char prom_finddev_name[];
+extern const char prom_chosen_path[];
+extern const char prom_cpu_path[];
+extern const char prom_getprop_name[];
+extern const char prom_mmu_name[];
+extern const char prom_callmethod_name[];
+extern const char prom_translate_name[];
+extern const char prom_map_name[];
+extern const char prom_unmap_name[];
+extern int prom_mmu_ihandle_cache;
+extern unsigned int prom_boot_mapped_pc;
+extern unsigned int prom_boot_mapping_mode;
+extern unsigned long prom_boot_mapping_phys_high, prom_boot_mapping_phys_low;
+
+struct linux_mlist_p1275 {
+	struct linux_mlist_p1275 *theres_more;
+	unsigned long start_adr;
+	unsigned long num_bytes;
+};
+
+struct linux_mem_p1275 {
+	struct linux_mlist_p1275 **p1275_totphys;
+	struct linux_mlist_p1275 **p1275_prommap;
+	struct linux_mlist_p1275 **p1275_available; /* What we can use */
+};
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(void *cif_handler, void *cif_stack);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(const char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(const char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(const char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Halt and power-off the machine. */
+extern void prom_halt_power_off(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ */
+typedef int (*callback_func_t)(long *cmd);
+extern void prom_setcallback(callback_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(const char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Multiprocessor operations... */
+#ifdef CONFIG_SMP
+/* Start the CPU with the given device tree node at the passed program
+ * counter with the given arg passed in via register %o0.
+ */
+extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg);
+
+/* Start the CPU with the given cpu ID at the passed program
+ * counter with the given arg passed in via register %o0.
+ */
+extern void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg);
+
+/* Stop the CPU with the given cpu ID.  */
+extern void prom_stopcpu_cpuid(int cpuid);
+
+/* Stop the current CPU. */
+extern void prom_stopself(void);
+
+/* Idle the current CPU. */
+extern void prom_idleself(void);
+
+/* Resume the CPU with the passed device tree node. */
+extern void prom_resumecpu(int cpunode);
+#endif
+
+/* Power management interfaces. */
+
+/* Put the current CPU to sleep. */
+extern void prom_sleepself(void);
+
+/* Put the entire system to sleep. */
+extern int prom_sleepsystem(void);
+
+/* Initiate a wakeup event. */
+extern int prom_wakeupsystem(void);
+
+/* MMU and memory related OBP interfaces. */
+
+/* Get unique string identifying SIMM at given physical address. */
+extern int prom_getunumber(int syndrome_code,
+			   unsigned long phys_addr,
+			   char *buf, int buflen);
+
+/* Retain physical memory to the caller across soft resets. */
+extern unsigned long prom_retain(const char *name,
+				 unsigned long pa_low, unsigned long pa_high,
+				 long size, long align);
+
+/* Load explicit I/D TLB entries into the calling processor. */
+extern long prom_itlb_load(unsigned long index,
+			   unsigned long tte_data,
+			   unsigned long vaddr);
+
+extern long prom_dtlb_load(unsigned long index,
+			   unsigned long tte_data,
+			   unsigned long vaddr);
+
+/* Map/Unmap client program address ranges.  First the format of
+ * the mapping mode argument.
+ */
+#define PROM_MAP_WRITE	0x0001 /* Writable */
+#define PROM_MAP_READ	0x0002 /* Readable - sw */
+#define PROM_MAP_EXEC	0x0004 /* Executable - sw */
+#define PROM_MAP_LOCKED	0x0010 /* Locked, use i/dtlb load calls for this instead */
+#define PROM_MAP_CACHED	0x0020 /* Cacheable in both L1 and L2 caches */
+#define PROM_MAP_SE	0x0040 /* Side-Effects */
+#define PROM_MAP_GLOB	0x0080 /* Global */
+#define PROM_MAP_IE	0x0100 /* Invert-Endianness */
+#define PROM_MAP_DEFAULT (PROM_MAP_WRITE | PROM_MAP_READ | PROM_MAP_EXEC | PROM_MAP_CACHED)
+
+extern int prom_map(int mode, unsigned long size,
+		    unsigned long vaddr, unsigned long paddr);
+extern void prom_unmap(unsigned long size, unsigned long vaddr);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, const char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int prom_getproperty(int thisnode, const char *property,
+			    char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, const char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, const char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, const char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, const char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, const char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, const char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error. Buffer should be at least 32B long.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure. Buffer should be at least 32B long.
+ */
+extern char *prom_nextprop(int node, const char *prev_property, char *buffer);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, const char *property);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(const char *name);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, const char *prop_name, char *prop_value,
+			int value_size);
+
+extern int prom_pathtoinode(const char *path);
+extern int prom_inst2pkg(int);
+extern int prom_service_exists(const char *service_name);
+extern void prom_sun4v_guest_soft_state(void);
+
+extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
+
+/* Client interface level routines. */
+extern long p1275_cmd(const char *, long, ...);
+
+#if 0
+#define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x))
+#else
+#define P1275_SIZE(x) x
+#endif
+
+/* We support at most 16 input and 1 output argument */
+#define P1275_ARG_NUMBER		0
+#define P1275_ARG_IN_STRING		1
+#define P1275_ARG_OUT_BUF		2
+#define P1275_ARG_OUT_32B		3
+#define P1275_ARG_IN_FUNCTION		4
+#define P1275_ARG_IN_BUF		5
+#define P1275_ARG_IN_64B		6
+
+#define P1275_IN(x) ((x) & 0xf)
+#define P1275_OUT(x) (((x) << 4) & 0xf0)
+#define P1275_INOUT(i,o) (P1275_IN(i)|P1275_OUT(o))
+#define P1275_ARG(n,x) ((x) << ((n)*3 + 8))
+
+#endif /* !(__SPARC64_OPLIB_H) */
diff --git a/arch/sparc/include/asm/page.h b/arch/sparc/include/asm/page.h
new file mode 100644
index 00000000000..f21de034902
--- /dev/null
+++ b/arch/sparc/include/asm/page.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PAGE_H
+#define ___ASM_SPARC_PAGE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
new file mode 100644
index 00000000000..cf5fb70ca1c
--- /dev/null
+++ b/arch/sparc/include/asm/page_32.h
@@ -0,0 +1,160 @@
+/*
+ * page.h:  Various defines and such for MMU operations on the Sparc for
+ *          the Linux kernel.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PAGE_H
+#define _SPARC_PAGE_H
+
+#ifdef CONFIG_SUN4
+#define PAGE_SHIFT   13
+#else
+#define PAGE_SHIFT   12
+#endif
+#ifndef __ASSEMBLY__
+/* I have my suspicions... -DaveM */
+#define PAGE_SIZE    (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE    (1 << PAGE_SHIFT)
+#endif
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)	 memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from) 	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+#define clear_user_page(addr, vaddr, page)	\
+	do { 	clear_page(addr);		\
+		sparc_flush_page_to_ram(page);	\
+	} while (0)
+#define copy_user_page(to, from, vaddr, page)	\
+	do {	copy_page(to, from);		\
+		sparc_flush_page_to_ram(page);	\
+	} while (0)
+
+/* The following structure is used to hold the physical
+ * memory configuration of the machine.  This is filled in
+ * prom_meminit() and is later used by mem_init() to set up
+ * mem_map[].  We statically allocate SPARC_PHYS_BANKS+1 of
+ * these structs, this is arbitrary.  The entry after the
+ * last valid one has num_bytes==0.
+ */
+struct sparc_phys_banks {
+  unsigned long base_addr;
+  unsigned long num_bytes;
+};
+
+#define SPARC_PHYS_BANKS 32
+
+extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
+
+/* Cache alias structure.  Entry is valid if context != -1. */
+struct cache_palias {
+	unsigned long vaddr;
+	int context;
+};
+
+/* passing structs on the Sparc slow us down tremendously... */
+
+/* #define STRICT_MM_TYPECHECKS */
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long ctxd; } ctxd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long iopgprot; } iopgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define iopte_val(x)	((x).iopte)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)	((x).pgd)
+#define ctxd_val(x)	((x).ctxd)
+#define pgprot_val(x)	((x).pgprot)
+#define iopgprot_val(x)	((x).iopgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __iopte(x)	((iopte_t) { (x) } )
+/* #define __pmd(x)        ((pmd_t) { (x) } ) */ /* XXX procedure with loop */
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __ctxd(x)	((ctxd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+#define __iopgprot(x)	((iopgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long ctxd_t;
+typedef unsigned long pgprot_t;
+typedef unsigned long iopgprot_t;
+
+#define pte_val(x)	(x)
+#define iopte_val(x)	(x)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)	(x)
+#define ctxd_val(x)	(x)
+#define pgprot_val(x)	(x)
+#define iopgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __iopte(x)	(x)
+/* #define __pmd(x)        (x) */ /* XXX later */
+#define __pgd(x)	(x)
+#define __ctxd(x)	(x)
+#define __pgprot(x)	(x)
+#define __iopgprot(x)	(x)
+
+#endif
+
+typedef struct page *pgtable_t;
+
+extern unsigned long sparc_unmapped_base;
+
+BTFIXUPDEF_SETHI(sparc_unmapped_base)
+
+#define TASK_UNMAPPED_BASE	BTFIXUP_SETHI(sparc_unmapped_base)
+
+#else /* !(__ASSEMBLY__) */
+
+#define __pgprot(x)	(x)
+
+#endif /* !(__ASSEMBLY__) */
+
+#define PAGE_OFFSET	0xf0000000
+#ifndef __ASSEMBLY__
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+#endif
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET + phys_base)
+#define __va(x)			((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET))
+
+#define virt_to_phys		__pa
+#define phys_to_virt		__va
+
+#define ARCH_PFN_OFFSET		(pfn_base)
+#define virt_to_page(kaddr)	(mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+
+#define pfn_valid(pfn)		(((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
+#define virt_addr_valid(kaddr)	((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _SPARC_PAGE_H */
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
new file mode 100644
index 00000000000..b579b910ef5
--- /dev/null
+++ b/arch/sparc/include/asm/page_64.h
@@ -0,0 +1,135 @@
+#ifndef _SPARC64_PAGE_H
+#define _SPARC64_PAGE_H
+
+#include <linux/const.h>
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define PAGE_SHIFT   13
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define PAGE_SHIFT   16
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#define PAGE_SIZE    (_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+/* Flushing for D-cache alias handling is only needed if
+ * the page size is smaller than 16K.
+ */
+#if PAGE_SHIFT < 14
+#define DCACHE_ALIASING_POSSIBLE
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT		22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define HPAGE_SHIFT		19
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT		16
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1UL))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern void _clear_page(void *page);
+#define clear_page(X)	_clear_page((void *)(X))
+struct page;
+extern void clear_user_page(void *addr, unsigned long vaddr, struct page *page);
+#define copy_page(X,Y)	memcpy((void *)(X), (void *)(Y), PAGE_SIZE)
+extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *topage);
+
+/* Unlike sparc32, sparc64's parameter passing API is more
+ * sane in that structures which as small enough are passed
+ * in registers instead of on the stack.  Thus, setting
+ * STRICT_MM_TYPECHECKS does not generate worse code so
+ * let's enable it to get the type checking.
+ */
+
+#define STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking.. */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned int pmd; } pmd_t;
+typedef struct { unsigned int pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define iopte_val(x)	((x).iopte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __iopte(x)	((iopte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else
+/* .. while these make it easier on the compiler */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef unsigned int pmd_t;
+typedef unsigned int pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)	(x)
+#define iopte_val(x)	(x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __iopte(x)	(x)
+#define __pmd(x)        (x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif /* (STRICT_MM_TYPECHECKS) */
+
+typedef struct page *pgtable_t;
+
+#define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_32BIT) ? \
+				 (_AC(0x0000000070000000,UL)) : \
+				 (_AC(0xfffff80000000000,UL) + (1UL << 32UL)))
+
+#include <asm-generic/memory_model.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+/* We used to stick this into a hard-coded global register (%g4)
+ * but that does not make sense anymore.
+ */
+#define PAGE_OFFSET		_AC(0xFFFFF80000000000,UL)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr)>>PAGE_SHIFT)
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define virt_to_phys __pa
+#define phys_to_virt __va
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/page.h>
+
+#endif /* _SPARC64_PAGE_H */
diff --git a/arch/sparc/include/asm/param.h b/arch/sparc/include/asm/param.h
new file mode 100644
index 00000000000..9836d9a3cb9
--- /dev/null
+++ b/arch/sparc/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASMSPARC_PARAM_H
+#define _ASMSPARC_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100	/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
new file mode 100644
index 00000000000..d9830621c90
--- /dev/null
+++ b/arch/sparc/include/asm/parport.h
@@ -0,0 +1,247 @@
+/* parport.h: sparc64 specific parport initialization and dma.
+ *
+ * Copyright (C) 1999  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _ASM_SPARC64_PARPORT_H
+#define _ASM_SPARC64_PARPORT_H 1
+
+#include <linux/of_device.h>
+
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+#include <asm/prom.h>
+
+#define PARPORT_PC_MAX_PORTS	PARPORT_MAX
+
+/*
+ * While sparc64 doesn't have an ISA DMA API, we provide something that looks
+ * close enough to make parport_pc happy
+ */
+#define HAS_DMA
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+static struct sparc_ebus_info {
+	struct ebus_dma_info info;
+	unsigned int addr;
+	unsigned int count;
+	int lock;
+
+	struct parport *port;
+} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
+
+static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
+
+static inline int request_dma(unsigned int dmanr, const char *device_id)
+{
+	if (dmanr >= PARPORT_PC_MAX_PORTS)
+		return -EINVAL;
+	if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0)
+		return -EBUSY;
+	return 0;
+}
+
+static inline void free_dma(unsigned int dmanr)
+{
+	if (dmanr >= PARPORT_PC_MAX_PORTS) {
+		printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
+		return;
+	}
+	if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) {
+		printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
+		return;
+	}
+}
+
+static inline void enable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
+
+	if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
+			     sparc_ebus_dmas[dmanr].addr,
+			     sparc_ebus_dmas[dmanr].count))
+		BUG();
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
+}
+
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+	/* nothing */
+}
+
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+	ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
+}
+
+static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
+{
+	sparc_ebus_dmas[dmanr].addr = addr;
+}
+
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	sparc_ebus_dmas[dmanr].count = count;
+}
+
+static inline unsigned int get_dma_residue(unsigned int dmanr)
+{
+	return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
+}
+
+static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
+{
+	unsigned long base = op->resource[0].start;
+	unsigned long config = op->resource[1].start;
+	unsigned long d_base = op->resource[2].start;
+	unsigned long d_len;
+	struct device_node *parent;
+	struct parport *p;
+	int slot, err;
+
+	parent = op->node->parent;
+	if (!strcmp(parent->name, "dma")) {
+		p = parport_pc_probe_port(base, base + 0x400,
+					  op->irqs[0], PARPORT_DMA_NOFIFO,
+					  op->dev.parent->parent);
+		if (!p)
+			return -ENOMEM;
+		dev_set_drvdata(&op->dev, p);
+		return 0;
+	}
+
+	for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) {
+		if (!test_and_set_bit(slot, dma_slot_map))
+			break;
+	}
+	err = -ENODEV;
+	if (slot >= PARPORT_PC_MAX_PORTS)
+		goto out_err;
+
+	spin_lock_init(&sparc_ebus_dmas[slot].info.lock);
+
+	d_len = (op->resource[2].end - d_base) + 1UL;
+	sparc_ebus_dmas[slot].info.regs =
+		of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA");
+
+	if (!sparc_ebus_dmas[slot].info.regs)
+		goto out_clear_map;
+
+	sparc_ebus_dmas[slot].info.flags = 0;
+	sparc_ebus_dmas[slot].info.callback = NULL;
+	sparc_ebus_dmas[slot].info.client_cookie = NULL;
+	sparc_ebus_dmas[slot].info.irq = 0xdeadbeef;
+	strcpy(sparc_ebus_dmas[slot].info.name, "parport");
+	if (ebus_dma_register(&sparc_ebus_dmas[slot].info))
+		goto out_unmap_regs;
+
+	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1);
+
+	/* Configure IRQ to Push Pull, Level Low */
+	/* Enable ECP, set bit 2 of the CTR first */
+	outb(0x04, base + 0x02);
+	ns87303_modify(config, PCR,
+		       PCR_EPP_ENABLE |
+		       PCR_IRQ_ODRAIN,
+		       PCR_ECP_ENABLE |
+		       PCR_ECP_CLK_ENA |
+		       PCR_IRQ_POLAR);
+
+	/* CTR bit 5 controls direction of port */
+	ns87303_modify(config, PTR,
+		       0, PTR_LPT_REG_DIR);
+
+	p = parport_pc_probe_port(base, base + 0x400,
+				  op->irqs[0],
+				  slot,
+				  op->dev.parent);
+	err = -ENOMEM;
+	if (!p)
+		goto out_disable_irq;
+
+	dev_set_drvdata(&op->dev, p);
+
+	return 0;
+
+out_disable_irq:
+	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+	ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+
+out_unmap_regs:
+	of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len);
+
+out_clear_map:
+	clear_bit(slot, dma_slot_map);
+
+out_err:
+	return err;
+}
+
+static int __devexit ecpp_remove(struct of_device *op)
+{
+	struct parport *p = dev_get_drvdata(&op->dev);
+	int slot = p->dma;
+
+	parport_pc_unregister_port(p);
+
+	if (slot != PARPORT_DMA_NOFIFO) {
+		unsigned long d_base = op->resource[2].start;
+		unsigned long d_len;
+
+		d_len = (op->resource[2].end - d_base) + 1UL;
+
+		ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+		ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+		of_iounmap(&op->resource[2],
+			   sparc_ebus_dmas[slot].info.regs,
+			   d_len);
+		clear_bit(slot, dma_slot_map);
+	}
+
+	return 0;
+}
+
+static struct of_device_id ecpp_match[] = {
+	{
+		.name = "ecpp",
+	},
+	{
+		.name = "parallel",
+		.compatible = "ecpp",
+	},
+	{
+		.name = "parallel",
+		.compatible = "ns87317-ecpp",
+	},
+	{},
+};
+
+static struct of_platform_driver ecpp_driver = {
+	.name			= "ecpp",
+	.match_table		= ecpp_match,
+	.probe			= ecpp_probe,
+	.remove			= __devexit_p(ecpp_remove),
+};
+
+static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	of_register_driver(&ecpp_driver, &of_bus_type);
+
+	return 0;
+}
+
+#endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/arch/sparc/include/asm/pbm.h b/arch/sparc/include/asm/pbm.h
new file mode 100644
index 00000000000..458a4916d14
--- /dev/null
+++ b/arch/sparc/include/asm/pbm.h
@@ -0,0 +1,47 @@
+/*
+ *
+ * pbm.h: PCI bus module pseudo driver software state
+ *        Adopted from sparc64 by V. Roganov and G. Raiko
+ *
+ * Original header:
+ * pbm.h: U2P PCI bus module pseudo driver software state.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * To put things into perspective, consider sparc64 with a few PCI controllers.
+ * Each type would have an own structure, with instances related one to one.
+ * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h.
+ * All three represent different abstractions.
+ *   pci_bus  - Linux PCI subsystem view of a PCI bus (including bridged buses)
+ *   pbm      - Arch-specific view of a PCI bus (sparc or sparc64)
+ *   pcic     - Chip-specific information for PCIC.
+ */
+
+#ifndef __SPARC_PBM_H
+#define __SPARC_PBM_H
+
+#include <linux/pci.h>
+#include <asm/oplib.h>
+#include <asm/prom.h>
+
+struct linux_pbm_info {
+	int		prom_node;
+	char		prom_name[64];
+	/* struct linux_prom_pci_ranges	pbm_ranges[PROMREG_MAX]; */
+	/* int		num_pbm_ranges; */
+
+	/* Now things for the actual PCI bus probes. */
+	unsigned int	pci_first_busno;	/* Can it be nonzero? */
+	struct pci_bus	*pci_bus;		/* Was inline, MJ allocs now */
+};
+
+/* PCI devices which are not bridges have this placed in their pci_dev
+ * sysdata member.  This makes OBP aware PCI device drivers easier to
+ * code.
+ */
+struct pcidev_cookie {
+	struct linux_pbm_info		*pbm;
+	struct device_node		*prom_node;
+};
+
+#endif /* !(__SPARC_PBM_H) */
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
new file mode 100644
index 00000000000..6e14fd17933
--- /dev/null
+++ b/arch/sparc/include/asm/pci.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PCI_H
+#define ___ASM_SPARC_PCI_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pci_64.h>
+#else
+#include <asm/pci_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
new file mode 100644
index 00000000000..0ee949d220c
--- /dev/null
+++ b/arch/sparc/include/asm/pci_32.h
@@ -0,0 +1,171 @@
+#ifndef __SPARC_PCI_H
+#define __SPARC_PCI_H
+
+#ifdef __KERNEL__
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0UL
+#define PCIBIOS_MIN_MEM		0UL
+
+#define PCI_IRQ_NONE		0xffffffff
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+#include <asm/scatterlist.h>
+
+struct pci_dev;
+
+/* Allocate and map kernel buffer using consistent mode DMA for a device.
+ * hwdev should be valid struct pci_dev pointer for PCI devices.
+ */
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
+
+/* Free and unmap a consistent DMA buffer.
+ * cpu_addr is what was returned from pci_alloc_consistent,
+ * size must be the same as what as passed into pci_alloc_consistent,
+ * and likewise dma_addr must be the same as what *dma_addrp was set to.
+ *
+ * References to the memory and mappings assosciated with cpu_addr/dma_addr
+ * past this call are illegal.
+ */
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/* Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
+ */
+extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
+
+/* Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/*
+ * Same as above, only with pages instead of mapped addresses.
+ */
+extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
+			unsigned long offset, size_t size, int direction);
+extern void pci_unmap_page(struct pci_dev *hwdev,
+			dma_addr_t dma_address, size_t size, int direction);
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first perform a pci_dma_sync_for_device, and then the device
+ * again owns the buffer.
+ */
+extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return 1;
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+#define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
+
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
+{
+        return (dma_addr == PCI_DMA_ERROR_CODE);
+}
+
+struct device_node;
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#endif /* __SPARC_PCI_H */
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
new file mode 100644
index 00000000000..4f79a54948f
--- /dev/null
+++ b/arch/sparc/include/asm/pci_64.h
@@ -0,0 +1,210 @@
+#ifndef __SPARC64_PCI_H
+#define __SPARC64_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0UL
+#define PCIBIOS_MIN_MEM		0UL
+
+#define PCI_IRQ_NONE		0xffffffff
+
+#define PCI_CACHE_LINE_BYTES	64
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* The PCI address space does not equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+					 dma_addr_t *dma_handle)
+{
+	return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
+}
+
+static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
+				       void *vaddr, dma_addr_t dma_handle)
+{
+	return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
+					size_t size, int direction)
+{
+	return dma_map_single(&pdev->dev, ptr, size,
+			      (enum dma_data_direction) direction);
+}
+
+static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
+				    size_t size, int direction)
+{
+	dma_unmap_single(&pdev->dev, dma_addr, size,
+			 (enum dma_data_direction) direction);
+}
+
+#define pci_map_page(dev, page, off, size, dir) \
+	pci_map_single(dev, (page_address(page) + (off)), size, dir)
+#define pci_unmap_page(dev,addr,sz,dir) \
+	pci_unmap_single(dev,addr,sz,dir)
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
+			     int nents, int direction)
+{
+	return dma_map_sg(&pdev->dev, sg, nents,
+			  (enum dma_data_direction) direction);
+}
+
+static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
+				int nents, int direction)
+{
+	dma_unmap_sg(&pdev->dev, sg, nents,
+		     (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
+					       dma_addr_t dma_handle,
+					       size_t size, int direction)
+{
+	dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
+				(enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
+						  dma_addr_t dma_handle,
+						  size_t size, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
+					   struct scatterlist *sg,
+					   int nents, int direction)
+{
+	dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
+			    (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
+					      struct scatterlist *sg,
+					      int nelems, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/* PCI IOMMU mapping bypass support. */
+
+/* PCI 64-bit addressing works for all slots on all controller
+ * types on sparc64.  However, it requires that the device
+ * can drive enough of the 64 bits.
+ */
+#define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
+#define PCI64_ADDR_BASE		0xfffc000000000000UL
+
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
+{
+	return dma_mapping_error(&pdev->dev, dma_addr);
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
+/* Return the index of the PCI controller for device PDEV. */
+
+extern int pci_domain_nr(struct pci_bus *bus);
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 1;
+}
+
+/* Platform support for /proc/bus/pci/X/Y mmap()s. */
+
+#define HAVE_PCI_MMAP
+#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
+#define get_pci_unmapped_area get_fb_unmapped_area
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state,
+			       int write_combine);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region);
+
+extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *);
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return PCI_IRQ_NONE;
+}
+
+struct device_node;
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+#endif /* __KERNEL__ */
+
+#endif /* __SPARC64_PCI_H */
diff --git a/arch/sparc/include/asm/pcic.h b/arch/sparc/include/asm/pcic.h
new file mode 100644
index 00000000000..f20ef562b26
--- /dev/null
+++ b/arch/sparc/include/asm/pcic.h
@@ -0,0 +1,123 @@
+/*
+ * pcic.h: JavaEngine 1 specific PCI definitions.
+ *
+ * Copyright (C) 1998 V. Roganov and G. Raiko
+ */
+
+#ifndef __SPARC_PCIC_H
+#define __SPARC_PCIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/smp.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <asm/pbm.h>
+
+struct linux_pcic {
+        void __iomem            *pcic_regs;
+        unsigned long           pcic_io;
+        void __iomem            *pcic_config_space_addr;
+        void __iomem            *pcic_config_space_data;
+	struct resource		pcic_res_regs;
+	struct resource		pcic_res_io;
+	struct resource		pcic_res_cfg_addr;
+	struct resource		pcic_res_cfg_data;
+        struct linux_pbm_info   pbm;
+	struct pcic_ca2irq	*pcic_imap;
+	int			pcic_imdim;
+};
+
+extern int pcic_probe(void);
+/* Erm... MJ redefined pcibios_present() so that it does not work early. */
+extern int pcic_present(void);
+extern void sun4m_pci_init_IRQ(void);
+
+#endif
+
+/* Size of PCI I/O space which we relocate. */
+#define PCI_SPACE_SIZE                  0x1000000       /* 16 MB */
+
+/* PCIC Register Set. */
+#define PCI_DIAGNOSTIC_0                0x40    /* 32 bits */
+#define PCI_SIZE_0                      0x44    /* 32 bits */
+#define PCI_SIZE_1                      0x48    /* 32 bits */
+#define PCI_SIZE_2                      0x4c    /* 32 bits */
+#define PCI_SIZE_3                      0x50    /* 32 bits */
+#define PCI_SIZE_4                      0x54    /* 32 bits */
+#define PCI_SIZE_5                      0x58    /* 32 bits */
+#define PCI_PIO_CONTROL                 0x60    /* 8  bits */
+#define PCI_DVMA_CONTROL                0x62    /* 8  bits */
+#define  PCI_DVMA_CONTROL_INACTIVITY_REQ        (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_ENABLE          (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_DISABLE         0
+#define  PCI_DVMA_CONTROL_INACTIVITY_ACK        (1<<4)
+#define PCI_INTERRUPT_CONTROL           0x63    /* 8  bits */
+#define PCI_CPU_INTERRUPT_PENDING       0x64    /* 32 bits */
+#define PCI_DIAGNOSTIC_1                0x68    /* 16 bits */
+#define PCI_SOFTWARE_INT_CLEAR          0x6a    /* 16 bits */
+#define PCI_SOFTWARE_INT_SET            0x6e    /* 16 bits */
+#define PCI_SYS_INT_PENDING             0x70    /* 32 bits */
+#define  PCI_SYS_INT_PENDING_PIO		0x40000000
+#define  PCI_SYS_INT_PENDING_DMA		0x20000000
+#define  PCI_SYS_INT_PENDING_PCI		0x10000000
+#define  PCI_SYS_INT_PENDING_APSR		0x08000000
+#define PCI_SYS_INT_TARGET_MASK         0x74    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_CLEAR   0x78    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_SET     0x7c    /* 32 bits */
+#define PCI_SYS_INT_PENDING_CLEAR       0x83    /* 8  bits */
+#define  PCI_SYS_INT_PENDING_CLEAR_ALL		0x80
+#define  PCI_SYS_INT_PENDING_CLEAR_PIO		0x40
+#define  PCI_SYS_INT_PENDING_CLEAR_DMA		0x20
+#define  PCI_SYS_INT_PENDING_CLEAR_PCI		0x10
+#define PCI_IOTLB_CONTROL               0x84    /* 8  bits */
+#define PCI_INT_SELECT_LO               0x88    /* 16 bits */
+#define PCI_ARBITRATION_SELECT          0x8a    /* 16 bits */
+#define PCI_INT_SELECT_HI               0x8c    /* 16 bits */
+#define PCI_HW_INT_OUTPUT               0x8e    /* 16 bits */
+#define PCI_IOTLB_RAM_INPUT             0x90    /* 32 bits */
+#define PCI_IOTLB_CAM_INPUT             0x94    /* 32 bits */
+#define PCI_IOTLB_RAM_OUTPUT            0x98    /* 32 bits */
+#define PCI_IOTLB_CAM_OUTPUT            0x9c    /* 32 bits */
+#define PCI_SMBAR0                      0xa0    /* 8  bits */
+#define PCI_MSIZE0                      0xa1    /* 8  bits */
+#define PCI_PMBAR0                      0xa2    /* 8  bits */
+#define PCI_SMBAR1                      0xa4    /* 8  bits */
+#define PCI_MSIZE1                      0xa5    /* 8  bits */
+#define PCI_PMBAR1                      0xa6    /* 8  bits */
+#define PCI_SIBAR                       0xa8    /* 8  bits */
+#define   PCI_SIBAR_ADDRESS_MASK        0xf
+#define PCI_ISIZE                       0xa9    /* 8  bits */
+#define   PCI_ISIZE_16M                 0xf
+#define   PCI_ISIZE_32M                 0xe
+#define   PCI_ISIZE_64M                 0xc
+#define   PCI_ISIZE_128M                0x8
+#define   PCI_ISIZE_256M                0x0
+#define PCI_PIBAR                       0xaa    /* 8  bits */
+#define PCI_CPU_COUNTER_LIMIT_HI        0xac    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT_LO        0xb0    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT           0xb4    /* 32 bits */
+#define PCI_SYS_LIMIT                   0xb8    /* 32 bits */
+#define PCI_SYS_COUNTER                 0xbc    /* 32 bits */
+#define   PCI_SYS_COUNTER_OVERFLOW      (1<<31) /* Limit reached */
+#define PCI_SYS_LIMIT_PSEUDO            0xc0    /* 32 bits */
+#define PCI_USER_TIMER_CONTROL          0xc4    /* 8  bits */
+#define PCI_USER_TIMER_CONFIG           0xc5    /* 8  bits */
+#define PCI_COUNTER_IRQ                 0xc6    /* 8  bits */
+#define  PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq)  ((((sys_irq) & 0xf) << 4) | \
+                                                  ((cpu_irq) & 0xf))
+#define  PCI_COUNTER_IRQ_SYS(v)                 (((v) >> 4) & 0xf)
+#define  PCI_COUNTER_IRQ_CPU(v)                 ((v) & 0xf)
+#define PCI_PIO_ERROR_COMMAND           0xc7    /* 8  bits */
+#define PCI_PIO_ERROR_ADDRESS           0xc8    /* 32 bits */
+#define PCI_IOTLB_ERROR_ADDRESS         0xcc    /* 32 bits */
+#define PCI_SYS_STATUS                  0xd0    /* 8  bits */
+#define   PCI_SYS_STATUS_RESET_ENABLE           (1<<0)
+#define   PCI_SYS_STATUS_RESET                  (1<<1)
+#define   PCI_SYS_STATUS_WATCHDOG_RESET         (1<<4)
+#define   PCI_SYS_STATUS_PCI_RESET              (1<<5)
+#define   PCI_SYS_STATUS_PCI_RESET_ENABLE       (1<<6)
+#define   PCI_SYS_STATUS_PCI_SATTELITE_MODE     (1<<7)
+
+#endif /* !(__SPARC_PCIC_H) */
diff --git a/arch/sparc/include/asm/percpu.h b/arch/sparc/include/asm/percpu.h
new file mode 100644
index 00000000000..bfb1d19ff1b
--- /dev/null
+++ b/arch/sparc/include/asm/percpu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PERCPU_H
+#define ___ASM_SPARC_PERCPU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/percpu_64.h>
+#else
+#include <asm/percpu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/percpu_32.h b/arch/sparc/include/asm/percpu_32.h
new file mode 100644
index 00000000000..06066a7aaec
--- /dev/null
+++ b/arch/sparc/include/asm/percpu_32.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SPARC_PERCPU__
+#define __ARCH_SPARC_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC_PERCPU__ */
diff --git a/arch/sparc/include/asm/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
new file mode 100644
index 00000000000..bee64593023
--- /dev/null
+++ b/arch/sparc/include/asm/percpu_64.h
@@ -0,0 +1,28 @@
+#ifndef __ARCH_SPARC64_PERCPU__
+#define __ARCH_SPARC64_PERCPU__
+
+#include <linux/compiler.h>
+
+register unsigned long __local_per_cpu_offset asm("g5");
+
+#ifdef CONFIG_SMP
+
+extern void real_setup_per_cpu_areas(void);
+
+extern unsigned long __per_cpu_base;
+extern unsigned long __per_cpu_shift;
+#define __per_cpu_offset(__cpu) \
+	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#define __my_cpu_offset __local_per_cpu_offset
+
+#else /* ! SMP */
+
+#define real_setup_per_cpu_areas()		do { } while (0)
+
+#endif	/* SMP */
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC64_PERCPU__ */
diff --git a/arch/sparc/include/asm/perfctr.h b/arch/sparc/include/asm/perfctr.h
new file mode 100644
index 00000000000..836873002b7
--- /dev/null
+++ b/arch/sparc/include/asm/perfctr.h
@@ -0,0 +1,173 @@
+/*----------------------------------------
+  PERFORMANCE INSTRUMENTATION  
+  Guillaume Thouvenin           08/10/98
+  David S. Miller               10/06/98
+  ---------------------------------------*/
+#ifndef PERF_COUNTER_API
+#define PERF_COUNTER_API
+
+/* sys_perfctr() interface.  First arg is operation code
+ * from enumeration below.  The meaning of further arguments
+ * are determined by the operation code.
+ *
+ * int sys_perfctr(int opcode, unsigned long arg0,
+ *                 unsigned long arg1, unsigned long arg2)
+ *
+ * Pointers which are passed by the user are pointers to 64-bit
+ * integers.
+ *
+ * Once enabled, performance counter state is retained until the
+ * process either exits or performs an exec.  That is, performance
+ * counters remain enabled for fork/clone children.
+ */
+enum perfctr_opcode {
+	/* Enable UltraSparc performance counters, ARG0 is pointer
+	 * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
+	 * to 64-bit accumulator for D1 counter.  ARG2 is a pointer to
+	 * the initial PCR register value to use.
+	 */
+	PERFCTR_ON,
+
+	/* Disable UltraSparc performance counters.  The PCR is written
+	 * with zero and the user counter accumulator pointers and
+	 * working PCR register value are forgotten.
+	 */
+	PERFCTR_OFF,
+
+	/* Add current D0 and D1 PIC values into user pointers given
+	 * in PERFCTR_ON operation.  The PIC is cleared before returning.
+	 */
+	PERFCTR_READ,
+
+	/* Clear the PIC register. */
+	PERFCTR_CLRPIC,
+
+	/* Begin using a new PCR value, the pointer to which is passed
+	 * in ARG0.  The PIC is also cleared after the new PCR value is
+	 * written.
+	 */
+	PERFCTR_SETPCR,
+
+	/* Store in pointer given in ARG0 the current PCR register value
+	 * being used.
+	 */
+	PERFCTR_GETPCR
+};
+
+/* I don't want the kernel's namespace to be polluted with this
+ * stuff when this file is included.  --DaveM
+ */
+#ifndef __KERNEL__
+
+#define  PRIV 0x00000001
+#define  SYS  0x00000002
+#define  USR  0x00000004
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT            0x00000000
+#define  INSTR_CNT            0x00000010
+#define  DISPATCH0_IC_MISS    0x00000020
+#define  DISPATCH0_STOREBUF   0x00000030
+#define  IC_REF               0x00000080
+#define  DC_RD                0x00000090
+#define  DC_WR                0x000000A0
+#define  LOAD_USE             0x000000B0
+#define  EC_REF               0x000000C0
+#define  EC_WRITE_HIT_RDO     0x000000D0
+#define  EC_SNOOP_INV         0x000000E0
+#define  EC_RD_HIT            0x000000F0
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT	      	0x00000000
+#define  US3_INSTR_CNT	      	0x00000010
+#define  US3_DISPATCH0_IC_MISS	0x00000020
+#define  US3_DISPATCH0_BR_TGT	0x00000030
+#define  US3_DISPATCH0_2ND_BR	0x00000040
+#define  US3_RSTALL_STOREQ	0x00000050
+#define  US3_RSTALL_IU_USE	0x00000060
+#define  US3_IC_REF		0x00000080
+#define  US3_DC_RD		0x00000090
+#define  US3_DC_WR		0x000000a0
+#define  US3_EC_REF		0x000000c0
+#define  US3_EC_WR_HIT_RTO	0x000000d0
+#define  US3_EC_SNOOP_INV	0x000000e0
+#define  US3_EC_RD_MISS		0x000000f0
+#define  US3_PC_PORT0_RD	0x00000100
+#define  US3_SI_SNOOP		0x00000110
+#define  US3_SI_CIQ_FLOW	0x00000120
+#define  US3_SI_OWNED		0x00000130
+#define  US3_SW_COUNT_0		0x00000140
+#define  US3_IU_BR_MISS_TAKEN	0x00000150
+#define  US3_IU_BR_COUNT_TAKEN	0x00000160
+#define  US3_DISP_RS_MISPRED	0x00000170
+#define  US3_FA_PIPE_COMPL	0x00000180
+#define  US3_MC_READS_0		0x00000200
+#define  US3_MC_READS_1		0x00000210
+#define  US3_MC_READS_2		0x00000220
+#define  US3_MC_READS_3		0x00000230
+#define  US3_MC_STALLS_0	0x00000240
+#define  US3_MC_STALLS_2	0x00000250
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT_D1         0x00000000
+#define  INSTR_CNT_D1         0x00000800
+#define  DISPATCH0_IC_MISPRED 0x00001000
+#define  DISPATCH0_FP_USE     0x00001800
+#define  IC_HIT               0x00004000
+#define  DC_RD_HIT            0x00004800
+#define  DC_WR_HIT            0x00005000
+#define  LOAD_USE_RAW         0x00005800
+#define  EC_HIT               0x00006000
+#define  EC_WB                0x00006800
+#define  EC_SNOOP_CB          0x00007000
+#define  EC_IT_HIT            0x00007800
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT_D1	0x00000000
+#define  US3_INSTR_CNT_D1	0x00000800
+#define  US3_DISPATCH0_MISPRED	0x00001000
+#define  US3_IC_MISS_CANCELLED	0x00001800
+#define  US3_RE_ENDIAN_MISS	0x00002000
+#define  US3_RE_FPU_BYPASS	0x00002800
+#define  US3_RE_DC_MISS		0x00003000
+#define  US3_RE_EC_MISS		0x00003800
+#define  US3_IC_MISS		0x00004000
+#define  US3_DC_RD_MISS		0x00004800
+#define  US3_DC_WR_MISS		0x00005000
+#define  US3_RSTALL_FP_USE	0x00005800
+#define  US3_EC_MISSES		0x00006000
+#define  US3_EC_WB		0x00006800
+#define  US3_EC_SNOOP_CB	0x00007000
+#define  US3_EC_IC_MISS		0x00007800
+#define  US3_RE_PC_MISS		0x00008000
+#define  US3_ITLB_MISS		0x00008800
+#define  US3_DTLB_MISS		0x00009000
+#define  US3_WC_MISS		0x00009800
+#define  US3_WC_SNOOP_CB	0x0000a000
+#define  US3_WC_SCRUBBED	0x0000a800
+#define  US3_WC_WB_WO_READ	0x0000b000
+#define  US3_PC_SOFT_HIT	0x0000c000
+#define  US3_PC_SNOOP_INV	0x0000c800
+#define  US3_PC_HARD_HIT	0x0000d000
+#define  US3_PC_PORT1_RD	0x0000d800
+#define  US3_SW_COUNT_1		0x0000e000
+#define  US3_IU_STAT_BR_MIS_UNTAKEN	0x0000e800
+#define  US3_IU_STAT_BR_COUNT_UNTAKEN	0x0000f000
+#define  US3_PC_MS_MISSES	0x0000f800
+#define  US3_MC_WRITES_0	0x00010800
+#define  US3_MC_WRITES_1	0x00011000
+#define  US3_MC_WRITES_2	0x00011800
+#define  US3_MC_WRITES_3	0x00012000
+#define  US3_MC_STALLS_1	0x00012800
+#define  US3_MC_STALLS_3	0x00013000
+#define  US3_RE_RAW_MISS	0x00013800
+#define  US3_FM_PIPE_COMPLETION	0x00014000
+
+struct vcounter_struct {
+  unsigned long long vcnt0;
+  unsigned long long vcnt1;
+};
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(PERF_COUNTER_API) */
diff --git a/arch/sparc/include/asm/pgalloc.h b/arch/sparc/include/asm/pgalloc.h
new file mode 100644
index 00000000000..b6db1f7cdca
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGALLOC_H
+#define ___ASM_SPARC_PGALLOC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgalloc_64.h>
+#else
+#include <asm/pgalloc_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
new file mode 100644
index 00000000000..681582d2696
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -0,0 +1,68 @@
+#ifndef _SPARC_PGALLOC_H
+#define _SPARC_PGALLOC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/page.h>
+#include <asm/btfixup.h>
+
+struct page;
+
+extern struct pgtable_cache_struct {
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache;
+	unsigned long pgtable_cache_sz;
+	unsigned long pgd_cache_sz;
+} pgt_quicklists;
+#define pgd_quicklist           (pgt_quicklists.pgd_cache)
+#define pmd_quicklist           ((unsigned long *)0)
+#define pte_quicklist           (pgt_quicklists.pte_cache)
+#define pgtable_cache_size      (pgt_quicklists.pgtable_cache_sz)
+#define pgd_cache_size		(pgt_quicklists.pgd_cache_sz)
+
+extern void check_pgt_cache(void);
+BTFIXUPDEF_CALL(void,	 do_check_pgt_cache, int, int)
+#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high)
+
+BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void)
+#define get_pgd_fast()		BTFIXUP_CALL(get_pgd_fast)()
+
+BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *)
+#define free_pgd_fast(pgd)	BTFIXUP_CALL(free_pgd_fast)(pgd)
+
+#define pgd_free(mm, pgd)	free_pgd_fast(pgd)
+#define pgd_alloc(mm)	get_pgd_fast()
+
+BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *)
+#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp)
+#define pgd_populate(MM, PGD, PMD)      pgd_set(PGD, PMD)
+
+BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
+#define pmd_alloc_one(mm, address)	BTFIXUP_CALL(pmd_alloc_one)(mm, address)
+
+BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
+#define free_pmd_fast(pmd)	BTFIXUP_CALL(free_pmd_fast)(pmd)
+
+#define pmd_free(mm, pmd)	free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+
+BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
+#define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *)
+#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE)
+
+BTFIXUPDEF_CALL(pgtable_t , pte_alloc_one, struct mm_struct *, unsigned long)
+#define pte_alloc_one(mm, address)	BTFIXUP_CALL(pte_alloc_one)(mm, address)
+BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long)
+#define pte_alloc_one_kernel(mm, addr)	BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr)
+
+BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
+#define pte_free_kernel(mm, pte)	BTFIXUP_CALL(free_pte_fast)(pte)
+
+BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
+#define pte_free(mm, pte)	BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+
+#endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h
new file mode 100644
index 00000000000..5bdfa2c6e40
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc_64.h
@@ -0,0 +1,81 @@
+#ifndef _SPARC64_PGALLOC_H
+#define _SPARC64_PGALLOC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/quicklist.h>
+
+#include <asm/spitfire.h>
+#include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+/* Page table allocation/freeing. */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(0, NULL, pgd);
+}
+
+#define pud_populate(MM, PUD, PMD)	pud_set(PUD, PMD)
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	quicklist_free(0, NULL, pmd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+	if (!pg)
+		return NULL;
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(0, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
+{
+	pgtable_page_dtor(ptepage);
+	quicklist_free_page(0, NULL, ptepage);
+}
+
+
+#define pmd_populate_kernel(MM, PMD, PTE)	pmd_set(PMD, PTE)
+#define pmd_populate(MM,PMD,PTE_PAGE)		\
+	pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(0, NULL, 25, 16);
+}
+
+#endif /* _SPARC64_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgtable.h b/arch/sparc/include/asm/pgtable.h
new file mode 100644
index 00000000000..59ba6f62073
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGTABLE_H
+#define ___ASM_SPARC_PGTABLE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgtable_64.h>
+#else
+#include <asm/pgtable_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
new file mode 100644
index 00000000000..08237fda887
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -0,0 +1,480 @@
+#ifndef _SPARC_PGTABLE_H
+#define _SPARC_PGTABLE_H
+
+/*  asm/pgtable.h:  Defines and functions used to work
+ *                        with Sparc page tables.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <asm/types.h>
+#ifdef CONFIG_SUN4
+#include <asm/pgtsun4.h>
+#else
+#include <asm/pgtsun4c.h>
+#endif
+#include <asm/pgtsrmmu.h>
+#include <asm/vac-ops.h>
+#include <asm/oplib.h>
+#include <asm/btfixup.h>
+#include <asm/system.h>
+
+
+struct vm_area_struct;
+struct page;
+
+extern void load_mmu(void);
+extern unsigned long calc_highpages(void);
+
+BTFIXUPDEF_SIMM13(pgdir_shift)
+BTFIXUPDEF_SETHI(pgdir_size)
+BTFIXUPDEF_SETHI(pgdir_mask)
+
+BTFIXUPDEF_SIMM13(ptrs_per_pmd)
+BTFIXUPDEF_SIMM13(ptrs_per_pgd)
+BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
+
+#define pte_ERROR(e)   __builtin_trap()
+#define pmd_ERROR(e)   __builtin_trap()
+#define pgd_ERROR(e)   __builtin_trap()
+
+BTFIXUPDEF_INT(page_none)
+BTFIXUPDEF_INT(page_copy)
+BTFIXUPDEF_INT(page_readonly)
+BTFIXUPDEF_INT(page_kernel)
+
+#define PMD_SHIFT		SUN4C_PMD_SHIFT
+#define PMD_SIZE        	(1UL << PMD_SHIFT)
+#define PMD_MASK        	(~(PMD_SIZE-1))
+#define PMD_ALIGN(__addr) 	(((__addr) + ~PMD_MASK) & PMD_MASK)
+#define PGDIR_SHIFT     	BTFIXUP_SIMM13(pgdir_shift)
+#define PGDIR_SIZE      	BTFIXUP_SETHI(pgdir_size)
+#define PGDIR_MASK      	BTFIXUP_SETHI(pgdir_mask)
+#define PTRS_PER_PTE    	1024
+#define PTRS_PER_PMD    	BTFIXUP_SIMM13(ptrs_per_pmd)
+#define PTRS_PER_PGD    	BTFIXUP_SIMM13(ptrs_per_pgd)
+#define USER_PTRS_PER_PGD	BTFIXUP_SIMM13(user_ptrs_per_pgd)
+#define FIRST_USER_ADDRESS	0
+#define PTE_SIZE		(PTRS_PER_PTE*4)
+
+#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
+extern pgprot_t PAGE_SHARED;
+#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
+#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
+
+extern unsigned long page_kernel;
+
+#ifdef MODULE
+#define PAGE_KERNEL	page_kernel
+#else
+#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
+#endif
+
+/* Top-level page directory */
+extern pgd_t swapper_pg_dir[1024];
+
+extern void paging_init(void);
+
+/* Page table for 0-4MB for everybody, on the Sparc this
+ * holds the same as on the i386.
+ */
+extern pte_t pg0[1024];
+extern pte_t pg1[1024];
+extern pte_t pg2[1024];
+extern pte_t pg3[1024];
+
+extern unsigned long ptr_in_current_pgd;
+
+/* Here is a trick, since mmap.c need the initializer elements for
+ * protection_map[] to be constant at compile time, I set the following
+ * to all zeros.  I set it to the real values after I link in the
+ * appropriate MMU page table routines at boot time.
+ */
+#define __P000  __pgprot(0)
+#define __P001  __pgprot(0)
+#define __P010  __pgprot(0)
+#define __P011  __pgprot(0)
+#define __P100  __pgprot(0)
+#define __P101  __pgprot(0)
+#define __P110  __pgprot(0)
+#define __P111  __pgprot(0)
+
+#define __S000	__pgprot(0)
+#define __S001	__pgprot(0)
+#define __S010	__pgprot(0)
+#define __S011	__pgprot(0)
+#define __S100	__pgprot(0)
+#define __S101	__pgprot(0)
+#define __S110	__pgprot(0)
+#define __S111	__pgprot(0)
+
+extern int num_contexts;
+
+/* First physical page can be anywhere, the following is needed so that
+ * va-->pa and vice versa conversions work properly without performance
+ * hit for all __pa()/__va() operations.
+ */
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t * __bad_pagetable(void);
+extern pte_t __bad_page(void);
+extern unsigned long empty_zero_page;
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+/*
+ */
+BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
+BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
+
+#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
+#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
+
+BTFIXUPDEF_SETHI(none_mask)
+BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
+BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
+
+static inline int pte_none(pte_t pte)
+{
+	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
+#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
+
+BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
+BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
+BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
+
+static inline int pmd_none(pmd_t pmd)
+{
+	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
+#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
+#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
+
+BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
+BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
+
+#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
+#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
+#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
+#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+BTFIXUPDEF_HALF(pte_writei)
+BTFIXUPDEF_HALF(pte_dirtyi)
+BTFIXUPDEF_HALF(pte_youngi)
+
+static int pte_write(pte_t pte) __attribute_const__;
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_writei);
+}
+
+static int pte_dirty(pte_t pte) __attribute_const__;
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
+}
+
+static int pte_young(pte_t pte) __attribute_const__;
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+BTFIXUPDEF_HALF(pte_filei)
+
+static int pte_file(pte_t pte) __attribute_const__;
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_filei);
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+/*
+ */
+BTFIXUPDEF_HALF(pte_wrprotecti)
+BTFIXUPDEF_HALF(pte_mkcleani)
+BTFIXUPDEF_HALF(pte_mkoldi)
+
+static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
+}
+
+static pte_t pte_mkclean(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
+}
+
+static pte_t pte_mkold(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
+}
+
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
+
+#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
+#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
+#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
+
+#define pte_mkspecial(pte)    (pte)
+
+#define pfn_pte(pfn, prot)		mk_pte(pfn_to_page(pfn), prot)
+
+BTFIXUPDEF_CALL(unsigned long,	 pte_pfn, pte_t)
+#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
+
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
+BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
+
+#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
+#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
+#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
+
+#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
+
+BTFIXUPDEF_INT(pte_modify_mask)
+
+static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
+		pgprot_val(newprot));
+}
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
+#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
+
+/* Find an entry in the third-level page table.. */
+BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
+#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
+
+/*
+ * This shortcut works on sun4m (and sun4d) because the nocache area is static,
+ * and sun4c is guaranteed to have no highmem anyway.
+ */
+#define pte_offset_map(d, a)		pte_offset_kernel(d,a)
+#define pte_offset_map_nested(d, a)	pte_offset_kernel(d,a)
+
+#define pte_unmap(pte)		do{}while(0)
+#define pte_unmap_nested(pte)	do{}while(0)
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+
+BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
+
+#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+struct seq_file;
+BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
+
+#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
+
+/* Fault handler stuff... */
+#define FAULT_CODE_PROT     0x1
+#define FAULT_CODE_WRITE    0x2
+#define FAULT_CODE_USER     0x4
+
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+
+#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+
+BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
+    unsigned long, unsigned int)
+BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
+#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
+#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
+
+extern int invalid_segment;
+
+/* Encode and de-code a swap entry */
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x)			BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x)		BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off)	BTFIXUP_CALL(__swp_entry)(__type,__off)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* file-offset-in-pte helpers */
+BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
+BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
+
+#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
+#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
+
+/*
+ * This is made a constant because mm/fremap.c required a constant.
+ * Note that layout of these bits is different between sun4c.c and srmmu.c.
+ */
+#define PTE_FILE_MAX_BITS 24
+
+/*
+ */
+struct ctx_list {
+	struct ctx_list *next;
+	struct ctx_list *prev;
+	unsigned int ctx_number;
+	struct mm_struct *ctx_mm;
+};
+
+extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
+extern struct ctx_list ctx_free;        /* Head of free list */
+extern struct ctx_list ctx_used;        /* Head of used contexts list */
+
+#define NO_CONTEXT     -1
+
+static inline void remove_from_ctx_list(struct ctx_list *entry)
+{
+	entry->next->prev = entry->prev;
+	entry->prev->next = entry->next;
+}
+
+static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
+{
+	entry->next = head;
+	(entry->prev = head->prev)->next = entry;
+	head->prev = entry;
+}
+#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
+#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
+
+static inline unsigned long
+__get_phys (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return sun4c_get_pte (addr) << PAGE_SHIFT;
+	case sun4m:
+	case sun4d:
+		return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
+	default:
+		return 0;
+	}
+}
+
+static inline int
+__get_iospace (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return -1; /* Don't check iospace on sun4c */
+	case sun4m:
+	case sun4d:
+		return (srmmu_get_pte (addr) >> 28);
+	default:
+		return -1;
+	}
+}
+
+extern unsigned long *sparc_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) \
+	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma,
+			      unsigned long from, unsigned long pfn,
+			      unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									  \
+	int __changed = !pte_same(*(__ptep), __entry);			  \
+	if (__changed) {						  \
+		set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
+		flush_tlb_page(__vma, __address);			  \
+	}								  \
+	(sparc_cpu_model == sun4c) || __changed;			  \
+})
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VMALLOC_START           0xfe600000
+/* XXX Alter this when I get around to fixing sun4c - Anton */
+#define VMALLOC_END             0xffc00000
+
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
new file mode 100644
index 00000000000..bb9ec2cce35
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -0,0 +1,775 @@
+/*
+ * pgtable.h: SpitFire page table operations.
+ *
+ * Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef _SPARC64_PGTABLE_H
+#define _SPARC64_PGTABLE_H
+
+/* This file contains the functions and defines necessary to modify and use
+ * the SpitFire page tables.
+ */
+
+#include <asm-generic/pgtable-nopud.h>
+
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <asm/types.h>
+#include <asm/spitfire.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB).
+ * The page copy blockops can use 0x6000000 to 0x8000000.
+ * The TSB is mapped in the 0x8000000 to 0xa000000 range.
+ * The PROM resides in an area spanning 0xf0000000 to 0x100000000.
+ * The vmalloc area spans 0x100000000 to 0x200000000.
+ * Since modules need to be in the lowest 32-bits of the address space,
+ * we place them right before the OBP area from 0x10000000 to 0xf0000000.
+ * There is a single static kernel PMD which maps from 0x0 to address
+ * 0x400000000.
+ */
+#define	TLBTEMP_BASE		_AC(0x0000000006000000,UL)
+#define	TSBMAP_BASE		_AC(0x0000000008000000,UL)
+#define MODULES_VADDR		_AC(0x0000000010000000,UL)
+#define MODULES_LEN		_AC(0x00000000e0000000,UL)
+#define MODULES_END		_AC(0x00000000f0000000,UL)
+#define LOW_OBP_ADDRESS		_AC(0x00000000f0000000,UL)
+#define HI_OBP_ADDRESS		_AC(0x0000000100000000,UL)
+#define VMALLOC_START		_AC(0x0000000100000000,UL)
+#define VMALLOC_END		_AC(0x0000000200000000,UL)
+#define VMEMMAP_BASE		_AC(0x0000000200000000,UL)
+
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
+/* XXX All of this needs to be rethought so we can take advantage
+ * XXX cheetah's full 64-bit virtual address space, ie. no more hole
+ * XXX in the middle like on spitfire. -DaveM
+ */
+/*
+ * Given a virtual address, the lowest PAGE_SHIFT bits determine offset
+ * into the page; the next higher PAGE_SHIFT-3 bits determine the pte#
+ * in the proper pagetable (the -3 is from the 8 byte ptes, and each page
+ * table is a single page long). The next higher PMD_BITS determine pmd#
+ * in the proper pmdtable (where we must have PMD_BITS <= (PAGE_SHIFT-2)
+ * since the pmd entries are 4 bytes, and each pmd page is a single page
+ * long). Finally, the higher few bits determine pgde#.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page
+ * table can map
+ */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE	(_AC(1,UL) << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PMD_BITS	(PAGE_SHIFT - 2)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3) + PMD_BITS)
+#define PGDIR_SIZE	(_AC(1,UL) << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+#define PGDIR_BITS	(PAGE_SHIFT - 2)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+/* Entries per page directory level. */
+#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PMD	(1UL << PMD_BITS)
+#define PTRS_PER_PGD	(1UL << PGDIR_BITS)
+
+/* Kernel has a separate 44bit address space. */
+#define FIRST_USER_ADDRESS	0
+
+#define pte_ERROR(e)	__builtin_trap()
+#define pmd_ERROR(e)	__builtin_trap()
+#define pgd_ERROR(e)	__builtin_trap()
+
+#endif /* !(__ASSEMBLY__) */
+
+/* PTE bits which are the same in SUN4U and SUN4V format.  */
+#define _PAGE_VALID	  _AC(0x8000000000000000,UL) /* Valid TTE            */
+#define _PAGE_R	  	  _AC(0x8000000000000000,UL) /* Keep ref bit uptodate*/
+
+/* SUN4U pte bits... */
+#define _PAGE_SZ4MB_4U	  _AC(0x6000000000000000,UL) /* 4MB Page             */
+#define _PAGE_SZ512K_4U	  _AC(0x4000000000000000,UL) /* 512K Page            */
+#define _PAGE_SZ64K_4U	  _AC(0x2000000000000000,UL) /* 64K Page             */
+#define _PAGE_SZ8K_4U	  _AC(0x0000000000000000,UL) /* 8K Page              */
+#define _PAGE_NFO_4U	  _AC(0x1000000000000000,UL) /* No Fault Only        */
+#define _PAGE_IE_4U	  _AC(0x0800000000000000,UL) /* Invert Endianness    */
+#define _PAGE_SOFT2_4U	  _AC(0x07FC000000000000,UL) /* Software bits, set 2 */
+#define _PAGE_RES1_4U	  _AC(0x0002000000000000,UL) /* Reserved             */
+#define _PAGE_SZ32MB_4U	  _AC(0x0001000000000000,UL) /* (Panther) 32MB page  */
+#define _PAGE_SZ256MB_4U  _AC(0x2001000000000000,UL) /* (Panther) 256MB page */
+#define _PAGE_SZALL_4U	  _AC(0x6001000000000000,UL) /* All pgsz bits        */
+#define _PAGE_SN_4U	  _AC(0x0000800000000000,UL) /* (Cheetah) Snoop      */
+#define _PAGE_RES2_4U	  _AC(0x0000780000000000,UL) /* Reserved             */
+#define _PAGE_PADDR_4U	  _AC(0x000007FFFFFFE000,UL) /* (Cheetah) pa[42:13]  */
+#define _PAGE_SOFT_4U	  _AC(0x0000000000001F80,UL) /* Software bits:       */
+#define _PAGE_EXEC_4U	  _AC(0x0000000000001000,UL) /* Executable SW bit    */
+#define _PAGE_MODIFIED_4U _AC(0x0000000000000800,UL) /* Modified (dirty)     */
+#define _PAGE_FILE_4U	  _AC(0x0000000000000800,UL) /* Pagecache page       */
+#define _PAGE_ACCESSED_4U _AC(0x0000000000000400,UL) /* Accessed (ref'd)     */
+#define _PAGE_READ_4U	  _AC(0x0000000000000200,UL) /* Readable SW Bit      */
+#define _PAGE_WRITE_4U	  _AC(0x0000000000000100,UL) /* Writable SW Bit      */
+#define _PAGE_PRESENT_4U  _AC(0x0000000000000080,UL) /* Present              */
+#define _PAGE_L_4U	  _AC(0x0000000000000040,UL) /* Locked TTE           */
+#define _PAGE_CP_4U	  _AC(0x0000000000000020,UL) /* Cacheable in P-Cache */
+#define _PAGE_CV_4U	  _AC(0x0000000000000010,UL) /* Cacheable in V-Cache */
+#define _PAGE_E_4U	  _AC(0x0000000000000008,UL) /* side-Effect          */
+#define _PAGE_P_4U	  _AC(0x0000000000000004,UL) /* Privileged Page      */
+#define _PAGE_W_4U	  _AC(0x0000000000000002,UL) /* Writable             */
+
+/* SUN4V pte bits... */
+#define _PAGE_NFO_4V	  _AC(0x4000000000000000,UL) /* No Fault Only        */
+#define _PAGE_SOFT2_4V	  _AC(0x3F00000000000000,UL) /* Software bits, set 2 */
+#define _PAGE_MODIFIED_4V _AC(0x2000000000000000,UL) /* Modified (dirty)     */
+#define _PAGE_ACCESSED_4V _AC(0x1000000000000000,UL) /* Accessed (ref'd)     */
+#define _PAGE_READ_4V	  _AC(0x0800000000000000,UL) /* Readable SW Bit      */
+#define _PAGE_WRITE_4V	  _AC(0x0400000000000000,UL) /* Writable SW Bit      */
+#define _PAGE_PADDR_4V	  _AC(0x00FFFFFFFFFFE000,UL) /* paddr[55:13]         */
+#define _PAGE_IE_4V	  _AC(0x0000000000001000,UL) /* Invert Endianness    */
+#define _PAGE_E_4V	  _AC(0x0000000000000800,UL) /* side-Effect          */
+#define _PAGE_CP_4V	  _AC(0x0000000000000400,UL) /* Cacheable in P-Cache */
+#define _PAGE_CV_4V	  _AC(0x0000000000000200,UL) /* Cacheable in V-Cache */
+#define _PAGE_P_4V	  _AC(0x0000000000000100,UL) /* Privileged Page      */
+#define _PAGE_EXEC_4V	  _AC(0x0000000000000080,UL) /* Executable Page      */
+#define _PAGE_W_4V	  _AC(0x0000000000000040,UL) /* Writable             */
+#define _PAGE_SOFT_4V	  _AC(0x0000000000000030,UL) /* Software bits        */
+#define _PAGE_FILE_4V	  _AC(0x0000000000000020,UL) /* Pagecache page       */
+#define _PAGE_PRESENT_4V  _AC(0x0000000000000010,UL) /* Present              */
+#define _PAGE_RESV_4V	  _AC(0x0000000000000008,UL) /* Reserved             */
+#define _PAGE_SZ16GB_4V	  _AC(0x0000000000000007,UL) /* 16GB Page            */
+#define _PAGE_SZ2GB_4V	  _AC(0x0000000000000006,UL) /* 2GB Page             */
+#define _PAGE_SZ256MB_4V  _AC(0x0000000000000005,UL) /* 256MB Page           */
+#define _PAGE_SZ32MB_4V	  _AC(0x0000000000000004,UL) /* 32MB Page            */
+#define _PAGE_SZ4MB_4V	  _AC(0x0000000000000003,UL) /* 4MB Page             */
+#define _PAGE_SZ512K_4V	  _AC(0x0000000000000002,UL) /* 512K Page            */
+#define _PAGE_SZ64K_4V	  _AC(0x0000000000000001,UL) /* 64K Page             */
+#define _PAGE_SZ8K_4V	  _AC(0x0000000000000000,UL) /* 8K Page              */
+#define _PAGE_SZALL_4V	  _AC(0x0000000000000007,UL) /* All pgsz bits        */
+
+#if PAGE_SHIFT == 13
+#define _PAGE_SZBITS_4U	_PAGE_SZ8K_4U
+#define _PAGE_SZBITS_4V	_PAGE_SZ8K_4V
+#elif PAGE_SHIFT == 16
+#define _PAGE_SZBITS_4U	_PAGE_SZ64K_4U
+#define _PAGE_SZBITS_4V	_PAGE_SZ64K_4V
+#else
+#error Wrong PAGE_SHIFT specified
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ4MB_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ4MB_4V
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ512K_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ512K_4V
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ64K_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ64K_4V
+#endif
+
+/* These are actually filled in at boot time by sun4{u,v}_pgprot_init() */
+#define __P000	__pgprot(0)
+#define __P001	__pgprot(0)
+#define __P010	__pgprot(0)
+#define __P011	__pgprot(0)
+#define __P100	__pgprot(0)
+#define __P101	__pgprot(0)
+#define __P110	__pgprot(0)
+#define __P111	__pgprot(0)
+
+#define __S000	__pgprot(0)
+#define __S001	__pgprot(0)
+#define __S010	__pgprot(0)
+#define __S011	__pgprot(0)
+#define __S100	__pgprot(0)
+#define __S101	__pgprot(0)
+#define __S110	__pgprot(0)
+#define __S111	__pgprot(0)
+
+#ifndef __ASSEMBLY__
+
+extern pte_t mk_pte_io(unsigned long, pgprot_t, int, unsigned long);
+
+extern unsigned long pte_sz_bits(unsigned long size);
+
+extern pgprot_t PAGE_KERNEL;
+extern pgprot_t PAGE_KERNEL_LOCKED;
+extern pgprot_t PAGE_COPY;
+extern pgprot_t PAGE_SHARED;
+
+/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */
+extern unsigned long _PAGE_IE;
+extern unsigned long _PAGE_E;
+extern unsigned long _PAGE_CACHE;
+
+extern unsigned long pg_iobits;
+extern unsigned long _PAGE_ALL_SZ_BITS;
+extern unsigned long _PAGE_SZBITS;
+
+extern struct page *mem_map_zero;
+#define ZERO_PAGE(vaddr)	(mem_map_zero)
+
+/* PFNs are real physical page numbers.  However, mem_map only begins to record
+ * per-page information starting at pfn_base.  This is to handle systems where
+ * the first physical page in the machine is at some huge physical address,
+ * such as 4GB.   This is common on a partitioned E10000, for example.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+	unsigned long paddr = pfn << PAGE_SHIFT;
+	unsigned long sz_bits;
+
+	sz_bits = 0UL;
+	if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) {
+		__asm__ __volatile__(
+		"\n661:	sethi		%%uhi(%1), %0\n"
+		"	sllx		%0, 32, %0\n"
+		"	.section	.sun4v_2insn_patch, \"ax\"\n"
+		"	.word		661b\n"
+		"	mov		%2, %0\n"
+		"	nop\n"
+		"	.previous\n"
+		: "=r" (sz_bits)
+		: "i" (_PAGE_SZBITS_4U), "i" (_PAGE_SZBITS_4V));
+	}
+	return __pte(paddr | sz_bits | pgprot_val(prot));
+}
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This one can be done with two shifts.  */
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__(
+	"\n661:	sllx		%1, %2, %0\n"
+	"	srlx		%0, %3, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sllx		%1, %4, %0\n"
+	"	srlx		%0, %5, %0\n"
+	"	.previous\n"
+	: "=r" (ret)
+	: "r" (pte_val(pte)),
+	  "i" (21), "i" (21 + PAGE_SHIFT),
+	  "i" (8), "i" (8 + PAGE_SHIFT));
+
+	return ret;
+}
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t prot)
+{
+	unsigned long mask, tmp;
+
+	/* SUN4U: 0x600307ffffffecb8 (negated == 0x9ffcf80000001347)
+	 * SUN4V: 0x30ffffffffffee17 (negated == 0xcf000000000011e8)
+	 *
+	 * Even if we use negation tricks the result is still a 6
+	 * instruction sequence, so don't try to play fancy and just
+	 * do the most straightforward implementation.
+	 *
+	 * Note: We encode this into 3 sun4v 2-insn patch sequences.
+	 */
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%uhi(%2), %1\n"
+	"	sethi		%%hi(%2), %0\n"
+	"\n662:	or		%1, %%ulo(%2), %1\n"
+	"	or		%0, %%lo(%2), %0\n"
+	"\n663:	sllx		%1, 32, %1\n"
+	"	or		%0, %1, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%3), %1\n"
+	"	sethi		%%hi(%3), %0\n"
+	"	.word		662b\n"
+	"	or		%1, %%ulo(%3), %1\n"
+	"	or		%0, %%lo(%3), %0\n"
+	"	.word		663b\n"
+	"	sllx		%1, 32, %1\n"
+	"	or		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (mask), "=r" (tmp)
+	: "i" (_PAGE_PADDR_4U | _PAGE_MODIFIED_4U | _PAGE_ACCESSED_4U |
+	       _PAGE_CP_4U | _PAGE_CV_4U | _PAGE_E_4U | _PAGE_PRESENT_4U |
+	       _PAGE_SZBITS_4U),
+	  "i" (_PAGE_PADDR_4V | _PAGE_MODIFIED_4V | _PAGE_ACCESSED_4V |
+	       _PAGE_CP_4V | _PAGE_CV_4V | _PAGE_E_4V | _PAGE_PRESENT_4V |
+	       _PAGE_SZBITS_4V));
+
+	return __pte((pte_val(pte) & mask) | (pgprot_val(prot) & ~mask));
+}
+
+static inline pte_t pgoff_to_pte(unsigned long off)
+{
+	off <<= PAGE_SHIFT;
+
+	__asm__ __volatile__(
+	"\n661:	or		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	or		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (off)
+	: "0" (off), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
+
+	return __pte(off);
+}
+
+static inline pgprot_t pgprot_noncached(pgprot_t prot)
+{
+	unsigned long val = pgprot_val(prot);
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %2, %0\n"
+	"	or		%0, %3, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	andn		%0, %4, %0\n"
+	"	or		%0, %5, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_CP_4U | _PAGE_CV_4U), "i" (_PAGE_E_4U),
+	             "i" (_PAGE_CP_4V | _PAGE_CV_4V), "i" (_PAGE_E_4V));
+
+	return __pgprot(val);
+}
+/* Various pieces of code check for platform support by ifdef testing
+ * on "pgprot_noncached".  That's broken and should be fixed, but for
+ * now...
+ */
+#define pgprot_noncached pgprot_noncached
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%uhi(%1), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	mov		%2, %0\n"
+	"	nop\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_SZHUGE_4U), "i" (_PAGE_SZHUGE_4V));
+
+	return __pte(pte_val(pte) | mask);
+}
+#endif
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	or		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	or		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
+	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	andn		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
+	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	unsigned long val = pte_val(pte), mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+	return __pte(val | mask);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	andn		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_WRITE_4U | _PAGE_W_4U),
+	  "i" (_PAGE_WRITE_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	mask |= _PAGE_R;
+
+	return __pte(pte_val(pte) & ~mask);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	mask |= _PAGE_R;
+
+	return __pte(pte_val(pte) | mask);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return pte;
+}
+
+static inline unsigned long pte_young(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_dirty(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_write(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_exec(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%hi(%1), %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	mov		%2, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_EXEC_4U), "i" (_PAGE_EXEC_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_file(pte_t pte)
+{
+	unsigned long val = pte_val(pte);
+
+	__asm__ __volatile__(
+	"\n661:	and		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	and		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
+
+	return val;
+}
+
+static inline unsigned long pte_present(pte_t pte)
+{
+	unsigned long val = pte_val(pte);
+
+	__asm__ __volatile__(
+	"\n661:	and		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	and		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_PRESENT_4U), "i" (_PAGE_PRESENT_4V));
+
+	return val;
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+#define pmd_set(pmdp, ptep)	\
+	(pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL))
+#define pud_set(pudp, pmdp)	\
+	(pud_val(*(pudp)) = (__pa((unsigned long) (pmdp)) >> 11UL))
+#define __pmd_page(pmd)		\
+	((unsigned long) __va((((unsigned long)pmd_val(pmd))<<11UL)))
+#define pmd_page(pmd) 			virt_to_page((void *)__pmd_page(pmd))
+#define pud_page_vaddr(pud)		\
+	((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL)))
+#define pud_page(pud) 			virt_to_page((void *)pud_page_vaddr(pud))
+#define pmd_none(pmd)			(!pmd_val(pmd))
+#define pmd_bad(pmd)			(0)
+#define pmd_present(pmd)		(pmd_val(pmd) != 0U)
+#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0U)
+#define pud_none(pud)			(!pud_val(pud))
+#define pud_bad(pud)			(0)
+#define pud_present(pud)		(pud_val(pud) != 0U)
+#define pud_clear(pudp)			(pud_val(*(pudp)) = 0U)
+
+/* Same in both SUN4V and SUN4U.  */
+#define pte_none(pte) 			(!pte_val(pte))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pudp, address)	\
+	((pmd_t *) pud_page_vaddr(*(pudp)) + \
+	 (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(dir, address)	\
+	((pte_t *) __pmd_page(*(dir)) + \
+	 ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+#define pte_offset_kernel		pte_index
+#define pte_offset_map			pte_index
+#define pte_offset_map_nested		pte_index
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/* Actual page table PTE updates.  */
+extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig);
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+{
+	pte_t orig = *ptep;
+
+	*ptep = pte;
+
+	/* It is more efficient to let flush_tlb_kernel_range()
+	 * handle init_mm tlb flushes.
+	 *
+	 * SUN4V NOTE: _PAGE_VALID is the same value in both the SUN4U
+	 *             and SUN4V pte layout, so this inline test is fine.
+	 */
+	if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID))
+		tlb_batch_add(mm, addr, ptep, orig);
+}
+
+#define pte_clear(mm,addr,ptep)		\
+	set_pte_at((mm), (addr), (ptep), __pte(0UL))
+
+#ifdef DCACHE_ALIASING_POSSIBLE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr)				\
+({									\
+	pte_t newpte = (pte);						\
+	if (tlb_type != hypervisor && pte_present(pte)) {		\
+		unsigned long this_pfn = pte_pfn(pte);			\
+									\
+		if (pfn_valid(this_pfn) &&				\
+		    (((old_addr) ^ (new_addr)) & (1 << 13)))		\
+			flush_dcache_page_all(current->mm,		\
+					      pfn_to_page(this_pfn));	\
+	}								\
+	newpte;								\
+})
+#endif
+
+extern pgd_t swapper_pg_dir[2048];
+extern pmd_t swapper_low_pmd_dir[2048];
+
+extern void paging_init(void);
+extern unsigned long find_ecache_flush_span(unsigned long size);
+
+/* These do nothing with the way I have things setup. */
+#define mmu_lockarea(vaddr, len)		(vaddr)
+#define mmu_unlockarea(vaddr, len)		do { } while(0)
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)	(((entry).val >> PAGE_SHIFT) & 0xffUL)
+#define __swp_offset(entry)	((entry).val >> (PAGE_SHIFT + 8UL))
+#define __swp_entry(type, offset)	\
+	( (swp_entry_t) \
+	  { \
+		(((long)(type) << PAGE_SHIFT) | \
+                 ((long)(offset) << (PAGE_SHIFT + 8UL))) \
+	  } )
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* File offset in PTE support. */
+extern unsigned long pte_file(pte_t);
+#define pte_to_pgoff(pte)	(pte_val(pte) >> PAGE_SHIFT)
+extern pte_t pgoff_to_pte(unsigned long);
+#define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 1UL)
+
+extern unsigned long *sparc64_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	\
+	(test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+
+extern int page_in_phys_avail(unsigned long paddr);
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
+			       unsigned long pfn,
+			       unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffffffffffUL)
+
+#include <asm-generic/pgtable.h>
+
+/* We provide our own get_unmapped_area to cope with VA holes and
+ * SHM area cache aliasing for userland.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+/* We provide a special get_unmapped_area for framebuffer mmaps to try and use
+ * the largest alignment possible such that larget PTEs can be used.
+ */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+					  unsigned long, unsigned long,
+					  unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
+extern void pgtable_cache_init(void);
+extern void sun4v_register_fault_status(void);
+extern void sun4v_ktsb_register(void);
+extern void __init cheetah_ecache_flush_init(void);
+extern void sun4v_patch_tlb_handlers(void);
+
+extern unsigned long cmdline_memory_size;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
new file mode 100644
index 00000000000..808555fc1d5
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -0,0 +1,298 @@
+/*
+ * pgtsrmmu.h:  SRMMU page table defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PGTSRMMU_H
+#define _SPARC_PGTSRMMU_H
+
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>	/* TI_UWINMASK for WINDOW_FLUSH */
+#endif
+
+/* Number of contexts is implementation-dependent; 64k is the most we support */
+#define SRMMU_MAX_CONTEXTS	65536
+
+/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
+#define SRMMU_REAL_PMD_SHIFT		18
+#define SRMMU_REAL_PMD_SIZE		(1UL << SRMMU_REAL_PMD_SHIFT)
+#define SRMMU_REAL_PMD_MASK		(~(SRMMU_REAL_PMD_SIZE-1))
+#define SRMMU_REAL_PMD_ALIGN(__addr)	(((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SRMMU_PGDIR_SHIFT       24
+#define SRMMU_PGDIR_SIZE        (1UL << SRMMU_PGDIR_SHIFT)
+#define SRMMU_PGDIR_MASK        (~(SRMMU_PGDIR_SIZE-1))
+#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
+
+#define SRMMU_REAL_PTRS_PER_PTE	64
+#define SRMMU_REAL_PTRS_PER_PMD	64
+#define SRMMU_PTRS_PER_PGD	256
+
+#define SRMMU_REAL_PTE_TABLE_SIZE	(SRMMU_REAL_PTRS_PER_PTE*4)
+#define SRMMU_PMD_TABLE_SIZE		(SRMMU_REAL_PTRS_PER_PMD*4)
+#define SRMMU_PGD_TABLE_SIZE		(SRMMU_PTRS_PER_PGD*4)
+
+/*
+ * To support pagetables in highmem, Linux introduces APIs which
+ * return struct page* and generally manipulate page tables when
+ * they are not mapped into kernel space. Our hardware page tables
+ * are smaller than pages. We lump hardware tabes into big, page sized
+ * software tables.
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table entry
+ * can map, and our pmd_t is 16 times larger than normal.  The values which
+ * were once defined here are now generic for 4c and srmmu, so they're
+ * found in pgtable.h.
+ */
+#define SRMMU_PTRS_PER_PMD	4
+
+/* Definition of the values in the ET field of PTD's and PTE's */
+#define SRMMU_ET_MASK         0x3
+#define SRMMU_ET_INVALID      0x0
+#define SRMMU_ET_PTD          0x1
+#define SRMMU_ET_PTE          0x2
+#define SRMMU_ET_REPTE        0x3 /* AIEEE, SuperSparc II reverse endian page! */
+
+/* Physical page extraction from PTP's and PTE's. */
+#define SRMMU_CTX_PMASK    0xfffffff0
+#define SRMMU_PTD_PMASK    0xfffffff0
+#define SRMMU_PTE_PMASK    0xffffff00
+
+/* The pte non-page bits.  Some notes:
+ * 1) cache, dirty, valid, and ref are frobbable
+ *    for both supervisor and user pages.
+ * 2) exec and write will only give the desired effect
+ *    on user pages
+ * 3) use priv and priv_readonly for changing the
+ *    characteristics of supervisor ptes
+ */
+#define SRMMU_CACHE        0x80
+#define SRMMU_DIRTY        0x40
+#define SRMMU_REF          0x20
+#define SRMMU_NOREAD       0x10
+#define SRMMU_EXEC         0x08
+#define SRMMU_WRITE        0x04
+#define SRMMU_VALID        0x02 /* SRMMU_ET_PTE */
+#define SRMMU_PRIV         0x1c
+#define SRMMU_PRIV_RDONLY  0x18
+
+#define SRMMU_FILE         0x40	/* Implemented in software */
+
+#define SRMMU_PTE_FILE_SHIFT     8	/* == 32-PTE_FILE_MAX_BITS */
+
+#define SRMMU_CHG_MASK    (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
+
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK	0x1f
+#define SRMMU_SWP_TYPE_SHIFT	SRMMU_PTE_FILE_SHIFT
+#define SRMMU_SWP_OFF_MASK	0x7ffff
+#define SRMMU_SWP_OFF_SHIFT	(SRMMU_PTE_FILE_SHIFT + 5)
+
+/* Some day I will implement true fine grained access bits for
+ * user pages because the SRMMU gives us the capabilities to
+ * enforce all the protection levels that vma's can have.
+ * XXX But for now...
+ */
+#define SRMMU_PAGE_NONE    __pgprot(SRMMU_CACHE | \
+				    SRMMU_PRIV | SRMMU_REF)
+#define SRMMU_PAGE_SHARED  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
+#define SRMMU_PAGE_COPY    __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_RDONLY  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_KERNEL  __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
+				    SRMMU_DIRTY | SRMMU_REF)
+
+/* SRMMU Register addresses in ASI 0x4.  These are valid for all
+ * current SRMMU implementations that exist.
+ */
+#define SRMMU_CTRL_REG           0x00000000
+#define SRMMU_CTXTBL_PTR         0x00000100
+#define SRMMU_CTX_REG            0x00000200
+#define SRMMU_FAULT_STATUS       0x00000300
+#define SRMMU_FAULT_ADDR         0x00000400
+
+#define WINDOW_FLUSH(tmp1, tmp2)					\
+	mov	0, tmp1;						\
+98:	ld	[%g6 + TI_UWINMASK], tmp2;				\
+	orcc	%g0, tmp2, %g0;						\
+	add	tmp1, 1, tmp1;						\
+	bne	98b;							\
+	 save	%sp, -64, %sp;						\
+99:	subcc	tmp1, 1, tmp1;						\
+	bne	99b;							\
+	 restore %g0, %g0, %g0;
+
+#ifndef __ASSEMBLY__
+
+/* This makes sense. Honest it does - Anton */
+/* XXX Yes but it's ugly as sin.  FIXME. -KMW */
+extern void *srmmu_nocache_pool;
+#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
+#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
+#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
+
+/* Accessing the MMU control register. */
+static inline unsigned int srmmu_get_mmureg(void)
+{
+        unsigned int retval;
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+			     "=r" (retval) :
+			     "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline void srmmu_set_mmureg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%%g0] %1\n\t" : :
+			     "r" (regval), "i" (ASI_M_MMUREGS) : "memory");
+
+}
+
+static inline void srmmu_set_ctable_ptr(unsigned long paddr)
+{
+	paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (paddr), "r" (SRMMU_CTXTBL_PTR),
+			     "i" (ASI_M_MMUREGS) :
+			     "memory");
+}
+
+static inline unsigned long srmmu_get_ctable_ptr(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_CTXTBL_PTR),
+			     "i" (ASI_M_MMUREGS));
+	return (retval & SRMMU_CTX_PMASK) << 4;
+}
+
+static inline void srmmu_set_context(int context)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (context), "r" (SRMMU_CTX_REG),
+			     "i" (ASI_M_MMUREGS) : "memory");
+}
+
+static inline int srmmu_get_context(void)
+{
+	register int retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_CTX_REG),
+			     "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline unsigned int srmmu_get_fstatus(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline unsigned int srmmu_get_faddr(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+/* This is guaranteed on all SRMMU's. */
+static inline void srmmu_flush_whole_tlb(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (0x400),        /* Flush entire TLB!! */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+/* These flush types are not available on all chips... */
+static inline void srmmu_flush_tlb_ctx(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (0x300),        /* Flush TLB ctx.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline void srmmu_flush_tlb_region(unsigned long addr)
+{
+	addr &= SRMMU_PGDIR_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (addr | 0x200), /* Flush TLB region.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+
+static inline void srmmu_flush_tlb_segment(unsigned long addr)
+{
+	addr &= SRMMU_REAL_PMD_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (addr | 0x100), /* Flush TLB segment.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline void srmmu_flush_tlb_page(unsigned long page)
+{
+	page &= PAGE_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (page),        /* Flush TLB page.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
+{
+	unsigned long retval;
+
+	vaddr &= PAGE_MASK;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+
+	return retval;
+}
+
+static inline int
+srmmu_get_pte (unsigned long addr)
+{
+	register unsigned long entry;
+        
+	__asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" :
+				"=r" (entry):
+				"r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE));
+	return entry;
+}
+
+extern unsigned long (*srmmu_read_physical)(unsigned long paddr);
+extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word);
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSRMMU_H) */
diff --git a/arch/sparc/include/asm/pgtsun4.h b/arch/sparc/include/asm/pgtsun4.h
new file mode 100644
index 00000000000..5a0d661fb82
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsun4.h
@@ -0,0 +1,171 @@
+/*
+ * pgtsun4.h:  Sun4 specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       23
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       23
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 19 bit PFN on sun4 */
+#define SUN4C_PFN_MASK 0x7ffff
+ 
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+				 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+				 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+					 _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+	unsigned long sync_err;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_err) :
+			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+	return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+	unsigned long sync_addr;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_addr) :
+			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+	return sync_addr;
+}
+
+/* SUN4 pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_SEGMAP));
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), "r" (entry),
+		       "i" (ASI_SEGMAP)
+		       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), 
+		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+		       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+		       "=r" (ctx) :
+		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+		       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4_H) */
diff --git a/arch/sparc/include/asm/pgtsun4c.h b/arch/sparc/include/asm/pgtsun4c.h
new file mode 100644
index 00000000000..aeb25e91217
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsun4c.h
@@ -0,0 +1,172 @@
+/*
+ * pgtsun4c.h:  Sun4c specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       22
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       22
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 16 bit PFN on sun4c */
+#define SUN4C_PFN_MASK 0xffff
+
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+				 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+				 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+					 _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+	unsigned long sync_err;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_err) :
+			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+	return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+	unsigned long sync_addr;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_addr) :
+			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+	return sync_addr;
+}
+
+/* SUN4C pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_SEGMAP));
+
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+
+  __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), "r" (entry),
+		       "i" (ASI_SEGMAP)
+		       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), 
+		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+		       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+		       "=r" (ctx) :
+		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+		       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4C_H) */
diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h
new file mode 100644
index 00000000000..71819bb943f
--- /dev/null
+++ b/arch/sparc/include/asm/pil.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC64_PIL_H
+#define _SPARC64_PIL_H
+
+/* To avoid some locking problems, we hard allocate certain PILs
+ * for SMP cross call messages that must do a etrap/rtrap.
+ *
+ * A local_irq_disable() does not block the cross call delivery, so
+ * when SMP locking is an issue we reschedule the event into a PIL
+ * interrupt which is blocked by local_irq_disable().
+ *
+ * In fact any XCALL which has to etrap/rtrap has a problem because
+ * it is difficult to prevent rtrap from running BH's, and that would
+ * need to be done if the XCALL arrived while %pil==15.
+ */
+#define PIL_SMP_CALL_FUNC	1
+#define PIL_SMP_RECEIVE_SIGNAL	2
+#define PIL_SMP_CAPTURE		3
+#define PIL_SMP_CTX_NEW_VERSION	4
+#define PIL_DEVICE_IRQ		5
+#define PIL_SMP_CALL_FUNC_SNGL	6
+
+#endif /* !(_SPARC64_PIL_H) */
diff --git a/arch/sparc/include/asm/poll.h b/arch/sparc/include/asm/poll.h
new file mode 100644
index 00000000000..091d3ad2e83
--- /dev/null
+++ b/arch/sparc/include/asm/poll.h
@@ -0,0 +1,12 @@
+#ifndef __SPARC_POLL_H
+#define __SPARC_POLL_H
+
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	256
+#define POLLMSG		512
+#define POLLREMOVE	1024
+#define POLLRDHUP       2048
+
+#include <asm-generic/poll.h>
+
+#endif
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
new file mode 100644
index 00000000000..03a0e091a88
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_POSIX_TYPES_H
+#define ___ASM_SPARC_POSIX_TYPES_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/posix_types_64.h>
+#else
+#include <asm/posix_types_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/posix_types_32.h b/arch/sparc/include/asm/posix_types_32.h
new file mode 100644
index 00000000000..6bb6eb1ca0f
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types_32.h
@@ -0,0 +1,118 @@
+#ifndef __ARCH_SPARC_POSIX_TYPES_H
+#define __ARCH_SPARC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int           __kernel_size_t;
+typedef int                    __kernel_ssize_t;
+typedef long int               __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long		       __kernel_suseconds_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef unsigned short         __kernel_ipc_pid_t;
+typedef unsigned short         __kernel_uid_t;
+typedef unsigned short         __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned short         __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef short                  __kernel_nlink_t;
+typedef long                   __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short	       __kernel_uid16_t;
+typedef unsigned short	       __kernel_gid16_t;
+typedef unsigned int	       __kernel_uid32_t;
+typedef unsigned int	       __kernel_gid32_t;
+typedef unsigned short	       __kernel_old_uid_t;
+typedef unsigned short	       __kernel_old_gid_t;
+typedef unsigned short	       __kernel_old_dev_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */
diff --git a/arch/sparc/include/asm/posix_types_64.h b/arch/sparc/include/asm/posix_types_64.h
new file mode 100644
index 00000000000..ba8f9329576
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types_64.h
@@ -0,0 +1,122 @@
+#ifndef __ARCH_SPARC64_POSIX_TYPES_H
+#define __ARCH_SPARC64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long          __kernel_size_t;
+typedef long                   __kernel_ssize_t;
+typedef long                   __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef int                    __kernel_ipc_pid_t;
+typedef unsigned int           __kernel_uid_t;
+typedef unsigned int           __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned int           __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef unsigned int           __kernel_nlink_t;
+typedef int                    __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short	       __kernel_uid16_t;
+typedef unsigned short	       __kernel_gid16_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+typedef unsigned short 	       __kernel_old_uid_t;
+typedef unsigned short         __kernel_old_gid_t;
+typedef __kernel_uid_t	       __kernel_uid32_t;
+typedef __kernel_gid_t	       __kernel_gid32_t;
+
+typedef unsigned int	       __kernel_old_dev_t;
+
+/* Note this piece of asymmetry from the v9 ABI.  */
+typedef int		       __kernel_suseconds_t;
+
+#ifdef __GNUC__
+typedef long long              __kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC64_POSIX_TYPES_H) */
diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h
new file mode 100644
index 00000000000..9da9646bf6c
--- /dev/null
+++ b/arch/sparc/include/asm/processor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PROCESSOR_H
+#define ___ASM_SPARC_PROCESSOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/processor_64.h>
+#else
+#include <asm/processor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h
new file mode 100644
index 00000000000..2ae67a2e7f3
--- /dev/null
+++ b/arch/sparc/include/asm/processor_32.h
@@ -0,0 +1,129 @@
+/* include/asm/processor.h
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+/*
+ * Sparc32 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
+
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+#include <asm/signal.h>
+#include <asm/btfixup.h>
+#include <asm/page.h>
+
+/*
+ * The sparc has no problems with write protection
+ */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
+ * That one page is used to protect kernel from intruders, so that
+ * we can make our access_ok test faster
+ */
+#define TASK_SIZE	PAGE_OFFSET
+#ifdef __KERNEL__
+#define STACK_TOP	(PAGE_OFFSET - PAGE_SIZE)
+#define STACK_TOP_MAX	STACK_TOP
+#endif /* __KERNEL__ */
+
+struct task_struct;
+
+#ifdef __KERNEL__
+struct fpq {
+	unsigned long *insn_addr;
+	unsigned long insn;
+};
+#endif
+
+typedef struct {
+	int seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+struct thread_struct {
+	struct pt_regs *kregs;
+	unsigned int _pad1;
+
+	/* Special child fork kpsr/kwim values. */
+	unsigned long fork_kpsr __attribute__ ((aligned (8)));
+	unsigned long fork_kwim;
+
+	/* Floating point regs */
+	unsigned long   float_regs[32] __attribute__ ((aligned (8)));
+	unsigned long   fsr;
+	unsigned long   fpqdepth;
+	struct fpq	fpqueue[16];
+	unsigned long flags;
+	mm_segment_t current_ds;
+};
+
+#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
+#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
+
+#define INIT_THREAD  { \
+	.flags = SPARC_FLAG_KTHREAD, \
+	.current_ds = KERNEL_DS, \
+}
+
+/* Return saved PC of a blocked thread. */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+				    unsigned long sp)
+{
+	register unsigned long zero asm("g1");
+
+	regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
+	regs->pc = ((pc & (~3)) - 4);
+	regs->npc = regs->pc + 4;
+	regs->y = 0;
+	zero = 0;
+	__asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x08]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x10]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x18]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x20]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x28]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x30]\n\t"
+			     "st\t%1, [%0 + %3 + 0x38]\n\t"
+			     "st\t%%g0, [%0 + %3 + 0x3c]"
+			     : /* no outputs */
+			     : "r" (regs),
+			       "r" (sp - sizeof(struct reg_window)),
+			       "r" (zero),
+			       "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
+			     : "memory");
+}
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while(0)
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern unsigned long get_wchan(struct task_struct *);
+
+#define task_pt_regs(tsk) ((tsk)->thread.kregs)
+#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
+
+#ifdef __KERNEL__
+
+extern struct task_struct *last_task_used_math;
+
+#define cpu_relax()	barrier()
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
new file mode 100644
index 00000000000..137a6bd72fc
--- /dev/null
+++ b/arch/sparc/include/asm/processor_64.h
@@ -0,0 +1,237 @@
+/*
+ * include/asm/processor.h
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC64_PROCESSOR_H
+#define __ASM_SPARC64_PROCESSOR_H
+
+/*
+ * Sparc64 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
+
+#include <asm/asi.h>
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/* The sparc has no problems with write protection */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/*
+ * User lives in his very own context, and cannot reference us. Note
+ * that TASK_SIZE is a misnomer, it really gives maximum user virtual
+ * address that the kernel will allocate out.
+ *
+ * XXX No longer using virtual page tables, kill this upper limit...
+ */
+#define VA_BITS		44
+#ifndef __ASSEMBLY__
+#define VPTE_SIZE	(1UL << (VA_BITS - PAGE_SHIFT + 3))
+#else
+#define VPTE_SIZE	(1 << (VA_BITS - PAGE_SHIFT + 3))
+#endif
+
+#define TASK_SIZE	((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+	(test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+	 (1UL << 32UL) : TASK_SIZE)
+#ifdef __KERNEL__
+
+#define STACK_TOP32	((1UL << 32UL) - PAGE_SIZE)
+#define STACK_TOP64	(0x0000080000000000UL - (1UL << 32UL))
+
+#define STACK_TOP	(test_thread_flag(TIF_32BIT) ? \
+			 STACK_TOP32 : STACK_TOP64)
+
+#define STACK_TOP_MAX	STACK_TOP64
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned char seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+/* XXX This should die, everything can go into thread_info now. */
+struct thread_struct {
+#ifdef CONFIG_DEBUG_SPINLOCK
+	/* How many spinlocks held by this thread.
+	 * Used with spin lock debugging to catch tasks
+	 * sleeping illegally with locks held.
+	 */
+	int smp_lock_count;
+	unsigned int smp_lock_pc;
+#else
+	int dummy; /* f'in gcc bug... */
+#endif
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#define INIT_THREAD  {			\
+	0,				\
+}
+#else /* CONFIG_DEBUG_SPINLOCK */
+#define INIT_THREAD  {					\
+/* smp_lock_count, smp_lock_pc, */			\
+   0,		   0,					\
+}
+#endif /* !(CONFIG_DEBUG_SPINLOCK) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Return saved PC of a blocked thread. */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* On Uniprocessor, even in RMO processes see TSO semantics */
+#ifdef CONFIG_SMP
+#define TSTATE_INITIAL_MM	TSTATE_TSO
+#else
+#define TSTATE_INITIAL_MM	TSTATE_RMO
+#endif
+
+/* Do necessary setup to start up a newly executed thread. */
+#define start_thread(regs, pc, sp) \
+do { \
+	unsigned long __asi = ASI_PNF; \
+	regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(1 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (1 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+#define start_thread32(regs, pc, sp) \
+do { \
+	unsigned long __asi = ASI_PNF; \
+	pc &= 0x00000000ffffffffUL; \
+	sp &= 0x00000000ffffffffUL; \
+	regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(2 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (2 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while (0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long get_wchan(struct task_struct *task);
+
+#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
+
+#define cpu_relax()	barrier()
+
+/* Prefetch support.  This is tuned for UltraSPARC-III and later.
+ * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
+ * a shallower prefetch queue than later chips.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	/* We do not use the read prefetch mnemonic because that
+	 * prefetches into the prefetch-cache which only is accessible
+	 * by floating point operations in UltraSPARC-III and later.
+	 * By contrast, "#one_write" prefetches into the L2 cache
+	 * in shared state.
+	 */
+	__asm__ __volatile__("prefetch [%0], #one_write"
+			     : /* no outputs */
+			     : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+	/* The most optimal prefetch to use for writes is
+	 * "#n_writes".  This brings the cacheline into the
+	 * L2 cache in "owned" state.
+	 */
+	__asm__ __volatile__("prefetch [%0], #n_writes"
+			     : /* no outputs */
+			     : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
new file mode 100644
index 00000000000..fd55522481c
--- /dev/null
+++ b/arch/sparc/include/asm/prom.h
@@ -0,0 +1,108 @@
+#ifndef _SPARC_PROM_H
+#define _SPARC_PROM_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ * Updates for SPARC by David S. Miller
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	2
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
+
+#define of_compat_cmp(s1, s2, l)	strncmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2)		strcasecmp((s1), (s2))
+#define of_node_cmp(s1, s2)		strcmp((s1), (s2))
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+	unsigned long _flags;
+	unsigned int unique_id;
+};
+
+struct of_irq_controller;
+struct device_node {
+	const char	*name;
+	const char	*type;
+	phandle	node;
+	char	*path_component_name;
+	char	*full_name;
+
+	struct	property *properties;
+	struct  property *deadprops; /* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
+	struct  kref kref;
+	unsigned long _flags;
+	void	*data;
+	unsigned int unique_id;
+
+	struct of_irq_controller *irq_trans;
+};
+
+struct of_irq_controller {
+	unsigned int	(*irq_build)(struct device_node *, unsigned int, void *);
+	void		*data;
+};
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+extern struct device_node *of_find_node_by_cpuid(int cpuid);
+extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
+extern int of_getintprop_default(struct device_node *np,
+				 const char *name,
+				 int def);
+extern int of_find_in_proplist(const char *list, const char *match, int len);
+#ifdef CONFIG_NUMA
+extern int of_node_to_nid(struct device_node *dp);
+#else
+#define of_node_to_nid(dp)	(-1)
+#endif
+
+extern void prom_build_devicetree(void);
+
+/* Dummy ref counting routines - to be implemented later */
+static inline struct device_node *of_node_get(struct device_node *node)
+{
+	return node;
+}
+static inline void of_node_put(struct device_node *node)
+{
+}
+
+/*
+ * NB:  This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+extern struct device_node *of_console_device;
+extern char *of_console_path;
+extern char *of_console_options;
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/include/asm/psr.h b/arch/sparc/include/asm/psr.h
new file mode 100644
index 00000000000..b8c0e5f0a66
--- /dev/null
+++ b/arch/sparc/include/asm/psr.h
@@ -0,0 +1,93 @@
+/*
+ * psr.h: This file holds the macros for masking off various parts of
+ *        the processor status register on the Sparc. This is valid
+ *        for Version 8. On the V9 this is renamed to the PSTATE
+ *        register and its members are accessed as fields like
+ *        PSTATE.PRIV for the current CPU privilege level.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __LINUX_SPARC_PSR_H
+#define __LINUX_SPARC_PSR_H
+
+/* The Sparc PSR fields are laid out as the following:
+ *
+ *  ------------------------------------------------------------------------
+ *  | impl  | vers  | icc   | resv  | EC | EF | PIL  | S | PS | ET |  CWP  |
+ *  | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6  | 5  |  4-0  |
+ *  ------------------------------------------------------------------------
+ */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+/* Get the %psr register. */
+static inline unsigned int get_psr(void)
+{
+	unsigned int psr;
+	__asm__ __volatile__(
+		"rd	%%psr, %0\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+	: "=r" (psr)
+	: /* no inputs */
+	: "memory");
+
+	return psr;
+}
+
+static inline void put_psr(unsigned int new_psr)
+{
+	__asm__ __volatile__(
+		"wr	%0, 0x0, %%psr\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+	: /* no outputs */
+	: "r" (new_psr)
+	: "memory", "cc");
+}
+
+/* Get the %fsr register.  Be careful, make sure the floating point
+ * enable bit is set in the %psr when you execute this or you will
+ * incur a trap.
+ */
+
+extern unsigned int fsr_storage;
+
+static inline unsigned int get_fsr(void)
+{
+	unsigned int fsr = 0;
+
+	__asm__ __volatile__(
+		"st	%%fsr, %1\n\t"
+		"ld	%1, %0\n\t"
+	: "=r" (fsr)
+	: "m" (fsr_storage));
+
+	return fsr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__LINUX_SPARC_PSR_H) */
diff --git a/arch/sparc/include/asm/psrcompat.h b/arch/sparc/include/asm/psrcompat.h
new file mode 100644
index 00000000000..44b6327dbbf
--- /dev/null
+++ b/arch/sparc/include/asm/psrcompat.h
@@ -0,0 +1,45 @@
+#ifndef _SPARC64_PSRCOMPAT_H
+#define _SPARC64_PSRCOMPAT_H
+
+#include <asm/pstate.h>
+
+/* Old 32-bit PSR fields for the compatibility conversion code. */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#define PSR_V8PLUS  0xff000000         /* fake impl/ver, meaning a 64bit CPU is present */
+#define PSR_XCC	    0x000f0000         /* if PSR_V8PLUS, this is %xcc */
+
+static inline unsigned int tstate_to_psr(unsigned long tstate)
+{
+	return ((tstate & TSTATE_CWP)			|
+		PSR_S					|
+		((tstate & TSTATE_ICC) >> 12)		|
+		((tstate & TSTATE_XCC) >> 20)		|
+		((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) |
+		PSR_V8PLUS);
+}
+
+static inline unsigned long psr_to_tstate_icc(unsigned int psr)
+{
+	unsigned long tstate = ((unsigned long)(psr & PSR_ICC)) << 12;
+	if ((psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS)
+		tstate |= ((unsigned long)(psr & PSR_XCC)) << 20;
+	return tstate;
+}
+
+#endif /* !(_SPARC64_PSRCOMPAT_H) */
diff --git a/arch/sparc/include/asm/pstate.h b/arch/sparc/include/asm/pstate.h
new file mode 100644
index 00000000000..a26a53777bb
--- /dev/null
+++ b/arch/sparc/include/asm/pstate.h
@@ -0,0 +1,91 @@
+#ifndef _SPARC64_PSTATE_H
+#define _SPARC64_PSTATE_H
+
+#include <linux/const.h>
+
+/* The V9 PSTATE Register (with SpitFire extensions).
+ *
+ * -----------------------------------------------------------------------
+ * | Resv | IG | MG | CLE | TLE |  MM  | RED | PEF | AM | PRIV | IE | AG |
+ * -----------------------------------------------------------------------
+ *  63  12  11   10    9     8    7   6   5     4     3     2     1    0
+ */
+#define PSTATE_IG   _AC(0x0000000000000800,UL) /* Interrupt Globals.	*/
+#define PSTATE_MG   _AC(0x0000000000000400,UL) /* MMU Globals.		*/
+#define PSTATE_CLE  _AC(0x0000000000000200,UL) /* Current Little Endian.*/
+#define PSTATE_TLE  _AC(0x0000000000000100,UL) /* Trap Little Endian.	*/
+#define PSTATE_MM   _AC(0x00000000000000c0,UL) /* Memory Model.		*/
+#define PSTATE_TSO  _AC(0x0000000000000000,UL) /* MM: TotalStoreOrder	*/
+#define PSTATE_PSO  _AC(0x0000000000000040,UL) /* MM: PartialStoreOrder	*/
+#define PSTATE_RMO  _AC(0x0000000000000080,UL) /* MM: RelaxedMemoryOrder*/
+#define PSTATE_RED  _AC(0x0000000000000020,UL) /* Reset Error Debug.	*/
+#define PSTATE_PEF  _AC(0x0000000000000010,UL) /* Floating Point Enable.*/
+#define PSTATE_AM   _AC(0x0000000000000008,UL) /* Address Mask.		*/
+#define PSTATE_PRIV _AC(0x0000000000000004,UL) /* Privilege.		*/
+#define PSTATE_IE   _AC(0x0000000000000002,UL) /* Interrupt Enable.	*/
+#define PSTATE_AG   _AC(0x0000000000000001,UL) /* Alternate Globals.	*/
+
+/* The V9 TSTATE Register (with SpitFire and Linux extensions).
+ *
+ * ---------------------------------------------------------------------
+ * |  Resv |  GL  |  CCR  |  ASI  |  %pil  |  PSTATE  |  Resv  |  CWP  |
+ * ---------------------------------------------------------------------
+ *  63   43 42  40 39   32 31   24 23    20 19       8 7      5 4     0
+ */
+#define TSTATE_GL	_AC(0x0000070000000000,UL) /* Global reg level  */
+#define TSTATE_CCR	_AC(0x000000ff00000000,UL) /* Condition Codes.	*/
+#define TSTATE_XCC	_AC(0x000000f000000000,UL) /* Condition Codes.	*/
+#define TSTATE_XNEG	_AC(0x0000008000000000,UL) /* %xcc Negative.	*/
+#define TSTATE_XZERO	_AC(0x0000004000000000,UL) /* %xcc Zero.	*/
+#define TSTATE_XOVFL	_AC(0x0000002000000000,UL) /* %xcc Overflow.	*/
+#define TSTATE_XCARRY	_AC(0x0000001000000000,UL) /* %xcc Carry.	*/
+#define TSTATE_ICC	_AC(0x0000000f00000000,UL) /* Condition Codes.	*/
+#define TSTATE_INEG	_AC(0x0000000800000000,UL) /* %icc Negative.	*/
+#define TSTATE_IZERO	_AC(0x0000000400000000,UL) /* %icc Zero.	*/
+#define TSTATE_IOVFL	_AC(0x0000000200000000,UL) /* %icc Overflow.	*/
+#define TSTATE_ICARRY	_AC(0x0000000100000000,UL) /* %icc Carry.	*/
+#define TSTATE_ASI	_AC(0x00000000ff000000,UL) /* AddrSpace ID.	*/
+#define TSTATE_PIL	_AC(0x0000000000f00000,UL) /* %pil (Linux traps)*/
+#define TSTATE_PSTATE	_AC(0x00000000000fff00,UL) /* PSTATE.		*/
+#define TSTATE_IG	_AC(0x0000000000080000,UL) /* Interrupt Globals.*/
+#define TSTATE_MG	_AC(0x0000000000040000,UL) /* MMU Globals.	*/
+#define TSTATE_CLE	_AC(0x0000000000020000,UL) /* CurrLittleEndian.	*/
+#define TSTATE_TLE	_AC(0x0000000000010000,UL) /* TrapLittleEndian.	*/
+#define TSTATE_MM	_AC(0x000000000000c000,UL) /* Memory Model.	*/
+#define TSTATE_TSO	_AC(0x0000000000000000,UL) /* MM: TSO		*/
+#define TSTATE_PSO	_AC(0x0000000000004000,UL) /* MM: PSO		*/
+#define TSTATE_RMO	_AC(0x0000000000008000,UL) /* MM: RMO		*/
+#define TSTATE_RED	_AC(0x0000000000002000,UL) /* Reset Error Debug.*/
+#define TSTATE_PEF	_AC(0x0000000000001000,UL) /* FPU Enable.	*/
+#define TSTATE_AM	_AC(0x0000000000000800,UL) /* Address Mask.	*/
+#define TSTATE_PRIV	_AC(0x0000000000000400,UL) /* Privilege.	*/
+#define TSTATE_IE	_AC(0x0000000000000200,UL) /* Interrupt Enable.	*/
+#define TSTATE_AG	_AC(0x0000000000000100,UL) /* Alternate Globals.*/
+#define TSTATE_SYSCALL	_AC(0x0000000000000020,UL) /* in syscall trap   */
+#define TSTATE_CWP	_AC(0x000000000000001f,UL) /* Curr Win-Pointer.	*/
+
+/* Floating-Point Registers State Register.
+ *
+ * --------------------------------
+ * |  Resv  |  FEF  |  DU  |  DL  |
+ * --------------------------------
+ *  63     3    2       1      0
+ */
+#define FPRS_FEF	_AC(0x0000000000000004,UL) /* FPU Enable.	*/
+#define FPRS_DU		_AC(0x0000000000000002,UL) /* Dirty Upper.	*/
+#define FPRS_DL		_AC(0x0000000000000001,UL) /* Dirty Lower.	*/
+
+/* Version Register.
+ *
+ * ------------------------------------------------------
+ * | MANUF | IMPL | MASK | Resv | MAXTL | Resv | MAXWIN |
+ * ------------------------------------------------------
+ *  63   48 47  32 31  24 23  16 15    8 7    5 4      0
+ */
+#define VERS_MANUF	_AC(0xffff000000000000,UL) /* Manufacturer.	*/
+#define VERS_IMPL	_AC(0x0000ffff00000000,UL) /* Implementation.	*/
+#define VERS_MASK	_AC(0x00000000ff000000,UL) /* Mask Set Revision.*/
+#define VERS_MAXTL	_AC(0x000000000000ff00,UL) /* Max Trap Level.	*/
+#define VERS_MAXWIN	_AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
+
+#endif /* !(_SPARC64_PSTATE_H) */
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
new file mode 100644
index 00000000000..6dcbe2eed2e
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PTRACE_H
+#define ___ASM_SPARC_PTRACE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ptrace_64.h>
+#else
+#include <asm/ptrace_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
new file mode 100644
index 00000000000..d409c4f21a5
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -0,0 +1,176 @@
+#ifndef _SPARC_PTRACE_H
+#define _SPARC_PTRACE_H
+
+#include <asm/psr.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+	unsigned long psr;
+	unsigned long pc;
+	unsigned long npc;
+	unsigned long y;
+	unsigned long u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_WIM       UREG_G0
+#define UREG_FADDR     UREG_G0
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A register window */
+struct reg_window {
+	unsigned long locals[8];
+	unsigned long ins[8];
+};
+
+/* A Sparc stack frame */
+struct sparc_stackf {
+	unsigned long locals[8];
+        unsigned long ins[6];
+	struct sparc_stackf *fp;
+	unsigned long callers_pc;
+	char *structptr;
+	unsigned long xargs[6];
+	unsigned long xxargs[1];
+};
+
+#define TRACEREG_SZ   sizeof(struct pt_regs)
+#define STACKFRAME_SZ sizeof(struct sparc_stackf)
+
+#ifdef __KERNEL__
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->psr &= ~PSR_SYSCALL);
+}
+
+#define user_mode(regs) (!((regs)->psr & PSR_PS))
+#define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+unsigned long profile_pc(struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ       0x50
+#define STACKFRAME_SZ     0x60
+#endif
+
+/*
+ * The asm-offsets.h is a generated file, so we cannot include it.
+ * It may be OK for glibc headers, but it's utterly pointless for C code.
+ * The assembly code using those offsets has to include it explicitly.
+ */
+/* #include <asm/asm-offsets.h> */
+
+/* These are for pt_regs. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+#endif /* !(_SPARC_PTRACE_H) */
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
new file mode 100644
index 00000000000..06e4914c13f
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -0,0 +1,346 @@
+#ifndef _SPARC64_PTRACE_H
+#define _SPARC64_PTRACE_H
+
+#include <asm/pstate.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+/* This magic value must have the low 9 bits clear,
+ * as that is where we encode the %tt value, see below.
+ */
+#define PT_REGS_MAGIC 0x57ac6c00
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+	unsigned long u_regs[16]; /* globals and ins */
+	unsigned long tstate;
+	unsigned long tpc;
+	unsigned long tnpc;
+	unsigned int y;
+
+	/* We encode a magic number, PT_REGS_MAGIC, along
+	 * with the %tt (trap type) register value at trap
+	 * entry time.  The magic number allows us to identify
+	 * accurately a trap stack frame in the stack
+	 * unwinder, and the %tt value allows us to test
+	 * things like "in a system call" etc. for an arbitray
+	 * process.
+	 *
+	 * The PT_REGS_MAGIC is choosen such that it can be
+	 * loaded completely using just a sethi instruction.
+	 */
+	unsigned int magic;
+};
+
+struct pt_regs32 {
+	unsigned int psr;
+	unsigned int pc;
+	unsigned int npc;
+	unsigned int y;
+	unsigned int u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A V9 register window */
+struct reg_window {
+	unsigned long locals[8];
+	unsigned long ins[8];
+};
+
+/* A 32-bit register window. */
+struct reg_window32 {
+	unsigned int locals[8];
+	unsigned int ins[8];
+};
+
+/* A V9 Sparc stack frame */
+struct sparc_stackf {
+	unsigned long locals[8];
+        unsigned long ins[6];
+	struct sparc_stackf *fp;
+	unsigned long callers_pc;
+	char *structptr;
+	unsigned long xargs[6];
+	unsigned long xxargs[1];
+};
+
+/* A 32-bit Sparc stack frame */
+struct sparc_stackf32 {
+	unsigned int locals[8];
+        unsigned int ins[6];
+	unsigned int fp;
+	unsigned int callers_pc;
+	unsigned int structptr;
+	unsigned int xargs[6];
+	unsigned int xxargs[1];
+};
+
+struct sparc_trapf {
+	unsigned long locals[8];
+	unsigned long ins[8];
+	unsigned long _unused;
+	struct pt_regs *regs;
+};
+
+#define TRACEREG_SZ	sizeof(struct pt_regs)
+#define STACKFRAME_SZ	sizeof(struct sparc_stackf)
+
+#define TRACEREG32_SZ	sizeof(struct pt_regs32)
+#define STACKFRAME32_SZ	sizeof(struct sparc_stackf32)
+
+#ifdef __KERNEL__
+
+static inline int pt_regs_trap_type(struct pt_regs *regs)
+{
+	return regs->magic & 0x1ff;
+}
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate & TSTATE_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate &= ~TSTATE_SYSCALL);
+}
+
+struct global_reg_snapshot {
+	unsigned long		tstate;
+	unsigned long		tpc;
+	unsigned long		tnpc;
+	unsigned long		o7;
+	unsigned long		i7;
+	unsigned long		rpc;
+	struct thread_info	*thread;
+	unsigned long		pad1;
+};
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define force_successful_syscall_return()	    \
+do {	current_thread_info()->syscall_noerror = 1; \
+} while (0)
+#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
+#define instruction_pointer(regs) ((regs)->tpc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ		0xa0
+#define STACKFRAME_SZ		0xc0
+
+#define TRACEREG32_SZ		0x50
+#define STACKFRAME32_SZ		0x60
+#endif
+
+#ifdef __KERNEL__
+#define STACK_BIAS		2047
+#endif
+
+/* These are for pt_regs. */
+#define PT_V9_G0     0x00
+#define PT_V9_G1     0x08
+#define PT_V9_G2     0x10
+#define PT_V9_G3     0x18
+#define PT_V9_G4     0x20
+#define PT_V9_G5     0x28
+#define PT_V9_G6     0x30
+#define PT_V9_G7     0x38
+#define PT_V9_I0     0x40
+#define PT_V9_I1     0x48
+#define PT_V9_I2     0x50
+#define PT_V9_I3     0x58
+#define PT_V9_I4     0x60
+#define PT_V9_I5     0x68
+#define PT_V9_I6     0x70
+#define PT_V9_FP     PT_V9_I6
+#define PT_V9_I7     0x78
+#define PT_V9_TSTATE 0x80
+#define PT_V9_TPC    0x88
+#define PT_V9_TNPC   0x90
+#define PT_V9_Y      0x98
+#define PT_V9_MAGIC  0x9c
+#define PT_TSTATE	PT_V9_TSTATE
+#define PT_TPC		PT_V9_TPC
+#define PT_TNPC		PT_V9_TNPC
+
+/* These for pt_regs32. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_V9_L0     0x00
+#define RW_V9_L1     0x08
+#define RW_V9_L2     0x10
+#define RW_V9_L3     0x18
+#define RW_V9_L4     0x20
+#define RW_V9_L5     0x28
+#define RW_V9_L6     0x30
+#define RW_V9_L7     0x38
+#define RW_V9_I0     0x40
+#define RW_V9_I1     0x48
+#define RW_V9_I2     0x50
+#define RW_V9_I3     0x58
+#define RW_V9_I4     0x60
+#define RW_V9_I5     0x68
+#define RW_V9_I6     0x70
+#define RW_V9_I7     0x78
+
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_V9_L0     0x00
+#define SF_V9_L1     0x08
+#define SF_V9_L2     0x10
+#define SF_V9_L3     0x18
+#define SF_V9_L4     0x20
+#define SF_V9_L5     0x28
+#define SF_V9_L6     0x30
+#define SF_V9_L7     0x38
+#define SF_V9_I0     0x40
+#define SF_V9_I1     0x48
+#define SF_V9_I2     0x50
+#define SF_V9_I3     0x58
+#define SF_V9_I4     0x60
+#define SF_V9_I5     0x68
+#define SF_V9_FP     0x70
+#define SF_V9_PC     0x78
+#define SF_V9_RETP   0x80
+#define SF_V9_XARG0  0x88
+#define SF_V9_XARG1  0x90
+#define SF_V9_XARG2  0x98
+#define SF_V9_XARG3  0xa0
+#define SF_V9_XARG4  0xa8
+#define SF_V9_XARG5  0xb0
+#define SF_V9_XXARG  0xb8
+
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+#ifdef __KERNEL__
+
+/* global_reg_snapshot offsets */
+#define GR_SNAP_TSTATE	0x00
+#define GR_SNAP_TPC	0x08
+#define GR_SNAP_TNPC	0x10
+#define GR_SNAP_O7	0x18
+#define GR_SNAP_I7	0x20
+#define GR_SNAP_RPC	0x28
+#define GR_SNAP_THREAD	0x30
+#define GR_SNAP_PAD1	0x38
+
+#endif  /*  __KERNEL__  */
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+/* There are for debugging 64-bit processes, either from a 32 or 64 bit
+ * parent.  Thus their complements are for debugging 32-bit processes only.
+ */
+
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETFPREGS64	  25
+#define PTRACE_SETFPREGS64	  26
+
+#endif /* !(_SPARC64_PTRACE_H) */
diff --git a/arch/sparc/include/asm/reboot.h b/arch/sparc/include/asm/reboot.h
new file mode 100644
index 00000000000..3f3f43f5be5
--- /dev/null
+++ b/arch/sparc/include/asm/reboot.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_REBOOT_H
+#define _SPARC64_REBOOT_H
+
+extern void machine_alt_power_off(void);
+
+#endif /* _SPARC64_REBOOT_H */
diff --git a/arch/sparc/include/asm/reg.h b/arch/sparc/include/asm/reg.h
new file mode 100644
index 00000000000..0c16e19cae4
--- /dev/null
+++ b/arch/sparc/include/asm/reg.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_REG_H
+#define ___ASM_SPARC_REG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/reg_64.h>
+#else
+#include <asm/reg_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/reg_32.h b/arch/sparc/include/asm/reg_32.h
new file mode 100644
index 00000000000..1efb056fb3d
--- /dev/null
+++ b/arch/sparc/include/asm/reg_32.h
@@ -0,0 +1,79 @@
+/*
+ * linux/include/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC_REG_H
+#define __SPARC_REG_H
+
+struct regs {
+	int     r_psr;
+#define r_ps r_psr
+        int     r_pc;
+        int     r_npc;
+        int     r_y;
+        int     r_g1;
+        int     r_g2;
+        int     r_g3;
+        int     r_g4;
+        int     r_g5;
+        int     r_g6;
+        int     r_g7;
+        int     r_o0;
+        int     r_o1;
+        int     r_o2;
+        int     r_o3;
+        int     r_o4;
+        int     r_o5;
+        int     r_o6;
+        int     r_o7;
+};
+
+struct fpq {
+        unsigned long *addr;
+        unsigned long instr;
+};
+
+struct  fq {
+        union {
+                double  whole;
+                struct  fpq fpq;
+        } FQu;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned
+
+struct fp_status {
+        union {
+                FPU_REGS_TYPE Fpu_regs[32];
+                double  Fpu_dregs[16];
+        } fpu_fr;
+        FPU_FSR_TYPE Fpu_fsr;
+        unsigned Fpu_flags;
+        unsigned Fpu_extra;
+        unsigned Fpu_qcnt;
+        struct fq Fpu_q[16];
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr.Fpu_regs
+#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+#define fpu_flags f_fpstatus.Fpu_flags
+#define fpu_extra f_fpstatus.Fpu_extra
+#define fpu_q     f_fpstatus.Fpu_q
+#define fpu_qcnt  f_fpstatus.Fpu_qcnt
+
+struct fpu {
+        struct fp_status f_fpstatus;
+};
+
+#endif /* __SPARC_REG_H */
diff --git a/arch/sparc/include/asm/reg_64.h b/arch/sparc/include/asm/reg_64.h
new file mode 100644
index 00000000000..6f277d7c7d8
--- /dev/null
+++ b/arch/sparc/include/asm/reg_64.h
@@ -0,0 +1,56 @@
+/*
+ * linux/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC64_REG_H
+#define __SPARC64_REG_H
+
+struct regs {
+        unsigned long r_g1;
+        unsigned long r_g2;
+        unsigned long r_g3;
+        unsigned long r_g4;
+        unsigned long r_g5;
+        unsigned long r_g6;
+        unsigned long r_g7;
+        unsigned long r_o0;
+        unsigned long r_o1;
+        unsigned long r_o2;
+        unsigned long r_o3;
+        unsigned long r_o4;
+        unsigned long r_o5;
+        unsigned long r_o6;
+        unsigned long r_o7;
+        unsigned long __pad;
+        unsigned long r_tstate;
+        unsigned long r_tpc;
+        unsigned long r_tnpc;
+        unsigned int  r_y;
+        unsigned int  r_fprs;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned long
+
+struct fp_status {
+        unsigned long fpu_fr[32];
+        unsigned long Fpu_fsr;
+};
+
+struct fpu {
+	struct fp_status f_fpstatus;
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+
+#endif /* __SPARC64_REG_H */
diff --git a/arch/sparc/include/asm/resource.h b/arch/sparc/include/asm/resource.h
new file mode 100644
index 00000000000..fe163cafb4c
--- /dev/null
+++ b/arch/sparc/include/asm/resource.h
@@ -0,0 +1,30 @@
+/*
+ * resource.h: Resource definitions.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_RESOURCE_H
+#define _SPARC_RESOURCE_H
+
+/*
+ * These two resource limit IDs have a Sparc/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		6	/* max number of open files */
+#define RLIMIT_NPROC		7	/* max number of processes */
+
+#if defined(__sparc__) && defined(__arch64__)
+/* Use generic version */
+#else
+/*
+ * SuS says limits have to be unsigned.
+ * We make this unsigned, but keep the
+ * old value for compatibility:
+ */
+#define RLIM_INFINITY		0x7fffffff
+#endif
+
+#include <asm-generic/resource.h>
+
+#endif /* !(_SPARC_RESOURCE_H) */
diff --git a/arch/sparc/include/asm/ross.h b/arch/sparc/include/asm/ross.h
new file mode 100644
index 00000000000..ecb6e81786a
--- /dev/null
+++ b/arch/sparc/include/asm/ross.h
@@ -0,0 +1,191 @@
+/*
+ * ross.h: Ross module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ROSS_H
+#define _SPARC_ROSS_H
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+/* Ross made Hypersparcs have a %psr 'impl' field of '0001'.  The 'vers'
+ * field has '1111'.
+ */
+
+/* The MMU control register fields on the HyperSparc.
+ *
+ * -----------------------------------------------------------------
+ * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME|
+ * -----------------------------------------------------------------
+ *  31    24 23-22 21  20  19 18-15 14 13 12 11 10  9   8 7-2  1  0
+ *
+ * Phew, lots of fields there ;-)
+ *
+ * CWR: Cache Wrapping Enabled, if one cache wrapping is on.
+ * SE: Snoop Enable, turns on bus snooping for cache activity if one.
+ * WBE: Write Buffer Enable, one turns it on.
+ * MID: The ModuleID of the chip for MBus transactions.
+ * BM: Boot-Mode. One indicates the MMU is in boot mode.
+ * C: Indicates whether accesses are cachable while the MMU is
+ *    disabled.
+ * CS: Cache Size -- 0 = 128k, 1 = 256k
+ * MR: Memory Reflection, one indicates that the memory bus connected
+ *     to the MBus supports memory reflection.
+ * CM: Cache Mode -- 0 = write-through, 1 = copy-back
+ * CE: Cache Enable -- 0 = no caching, 1 = cache is on
+ * NF: No Fault -- 0 = faults trap the CPU from supervisor mode
+ *                 1 = faults from supervisor mode do not generate traps
+ * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on
+ */
+
+#define HYPERSPARC_CWENABLE   0x00200000
+#define HYPERSPARC_SBENABLE   0x00100000
+#define HYPERSPARC_WBENABLE   0x00080000
+#define HYPERSPARC_MIDMASK    0x00078000
+#define HYPERSPARC_BMODE      0x00004000
+#define HYPERSPARC_ACENABLE   0x00002000
+#define HYPERSPARC_CSIZE      0x00001000
+#define HYPERSPARC_MRFLCT     0x00000800
+#define HYPERSPARC_CMODE      0x00000400
+#define HYPERSPARC_CENABLE    0x00000100
+#define HYPERSPARC_NFAULT     0x00000002
+#define HYPERSPARC_MENABLE    0x00000001
+
+
+/* The ICCR instruction cache register on the HyperSparc.
+ *
+ * -----------------------------------------------
+ * |                                 | FTD | ICE |
+ * -----------------------------------------------
+ *  31                                  1     0
+ *
+ * This register is accessed using the V8 'wrasr' and 'rdasr'
+ * opcodes, since not all assemblers understand them and those
+ * that do use different semantics I will just hard code the
+ * instruction with a '.word' statement.
+ *
+ * FTD:  If set to one flush instructions executed during an
+ *       instruction cache hit occurs, the corresponding line
+ *       for said cache-hit is invalidated.  If FTD is zero,
+ *       an unimplemented 'flush' trap will occur when any
+ *       flush is executed by the processor.
+ *
+ * ICE:  If set to one, the instruction cache is enabled.  If
+ *       zero, the cache will not be used for instruction fetches.
+ *
+ * All other bits are read as zeros, and writes to them have no
+ * effect.
+ *
+ * Wheee, not many assemblers understand the %iccr register nor
+ * the generic asr r/w instructions.
+ *
+ *  1000 0011 0100 0111 1100 0000 0000 0000   ! rd %iccr, %g1
+ *
+ * 0x  8    3    4    7    c    0    0    0   ! 0x8347c000
+ *
+ *  1011 1111 1000 0000 0110 0000 0000 0000   ! wr %g1, 0x0, %iccr
+ *
+ * 0x  b    f    8    0    6    0    0    0   ! 0xbf806000
+ *
+ */
+
+#define HYPERSPARC_ICCR_FTD     0x00000002
+#define HYPERSPARC_ICCR_ICE     0x00000001
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int get_ross_icr(void)
+{
+	unsigned int icreg;
+
+	__asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */
+			     "mov %%g1, %0\n\t"
+			     : "=r" (icreg)
+			     : /* no inputs */
+			     : "g1", "memory");
+
+	return icreg;
+}
+
+static inline void put_ross_icr(unsigned int icreg)
+{
+	__asm__ __volatile__("or %%g0, %0, %%g1\n\t"
+			     ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */
+			     "nop\n\t"
+			     "nop\n\t"
+			     "nop\n\t"
+			     : /* no outputs */
+			     : "r" (icreg)
+			     : "g1", "memory");
+
+	return;
+}
+
+/* HyperSparc specific cache flushing. */
+
+/* This is for the on-chip instruction cache. */
+static inline void hyper_flush_whole_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_IWHOLE)
+			     : "memory");
+	return;
+}
+
+extern int vac_cache_size;
+extern int vac_line_size;
+
+static inline void hyper_clear_all_tags(void)
+{
+	unsigned long addr;
+
+	for(addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+				     : "memory");
+}
+
+static inline void hyper_flush_unconditional_combined(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_CTX)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_user(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_USER)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_page(unsigned long page)
+{
+	unsigned long end;
+
+	page &= PAGE_MASK;
+	end = page + PAGE_SIZE;
+	while (page < end) {
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+				     : "memory");
+		page += vac_line_size;
+	}
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_ROSS_H) */
diff --git a/arch/sparc/include/asm/rtc.h b/arch/sparc/include/asm/rtc.h
new file mode 100644
index 00000000000..f9ecb1fe2ec
--- /dev/null
+++ b/arch/sparc/include/asm/rtc.h
@@ -0,0 +1,26 @@
+/*
+ * rtc.h: Definitions for access to the Mostek real time clock
+ *
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _RTC_H
+#define _RTC_H
+
+#include <linux/ioctl.h>
+
+struct rtc_time
+{
+	int	sec;	/* Seconds (0-59) */
+	int	min;	/* Minutes (0-59) */
+	int	hour;	/* Hour (0-23) */
+	int	dow;	/* Day of the week (1-7) */
+	int	dom;	/* Day of the month (1-31) */
+	int	month;	/* Month of year (1-12) */
+	int	year;	/* Year (0-99) */
+};
+
+#define RTCGET _IOR('p', 20, struct rtc_time)
+#define RTCSET _IOW('p', 21, struct rtc_time)
+
+#endif
diff --git a/arch/sparc/include/asm/rwsem-const.h b/arch/sparc/include/asm/rwsem-const.h
new file mode 100644
index 00000000000..a303c9d64d8
--- /dev/null
+++ b/arch/sparc/include/asm/rwsem-const.h
@@ -0,0 +1,12 @@
+/* rwsem-const.h: RW semaphore counter constants.  */
+#ifndef _SPARC64_RWSEM_CONST_H
+#define _SPARC64_RWSEM_CONST_H
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		0xffff0000
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#endif /* _SPARC64_RWSEM_CONST_H */
diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
new file mode 100644
index 00000000000..1dc129ac2fe
--- /dev/null
+++ b/arch/sparc/include/asm/rwsem.h
@@ -0,0 +1,84 @@
+/*
+ * rwsem.h: R/W semaphores implemented using CAS
+ *
+ * Written by David S. Miller (davem@redhat.com), 2001.
+ * Derived from asm-i386/rwsem.h
+ */
+#ifndef _SPARC64_RWSEM_H
+#define _SPARC64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/rwsem-const.h>
+
+struct rwsem_waiter;
+
+struct rw_semaphore {
+	signed int count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
+  __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)						\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__init_rwsem((sem), #sem, &__key);			\
+} while (0)
+
+extern void __down_read(struct rw_semaphore *sem);
+extern int __down_read_trylock(struct rw_semaphore *sem);
+extern void __down_write(struct rw_semaphore *sem);
+extern int __down_write_trylock(struct rw_semaphore *sem);
+extern void __up_read(struct rw_semaphore *sem);
+extern void __up_write(struct rw_semaphore *sem);
+extern void __downgrade_write(struct rw_semaphore *sem);
+
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	__down_write(sem);
+}
+
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC64_RWSEM_H */
diff --git a/arch/sparc/include/asm/sbi.h b/arch/sparc/include/asm/sbi.h
new file mode 100644
index 00000000000..5eb7f1965d3
--- /dev/null
+++ b/arch/sparc/include/asm/sbi.h
@@ -0,0 +1,115 @@
+/*
+ * sbi.h:  SBI (Sbus Interface on sun4d) definitions
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_SBI_H
+#define _SPARC_SBI_H
+
+#include <asm/obio.h>
+
+/* SBI */
+struct sbi_regs {
+/* 0x0000 */	u32		cid;		/* Component ID */
+/* 0x0004 */	u32		ctl;		/* Control */
+/* 0x0008 */	u32		status;		/* Status */
+		u32		_unused1;
+		
+/* 0x0010 */	u32		cfg0;		/* Slot0 config reg */
+/* 0x0014 */	u32		cfg1;		/* Slot1 config reg */
+/* 0x0018 */	u32		cfg2;		/* Slot2 config reg */
+/* 0x001c */	u32		cfg3;		/* Slot3 config reg */
+
+/* 0x0020 */	u32		stb0;		/* Streaming buf control for slot 0 */
+/* 0x0024 */	u32		stb1;		/* Streaming buf control for slot 1 */
+/* 0x0028 */	u32		stb2;		/* Streaming buf control for slot 2 */
+/* 0x002c */	u32		stb3;		/* Streaming buf control for slot 3 */
+
+/* 0x0030 */	u32		intr_state;	/* Interrupt state */
+/* 0x0034 */	u32		intr_tid;	/* Interrupt target ID */
+/* 0x0038 */	u32		intr_diag;	/* Interrupt diagnostics */
+};
+
+#define SBI_CID			0x02800000
+#define SBI_CTL			0x02800004
+#define SBI_STATUS		0x02800008
+#define SBI_CFG0		0x02800010
+#define SBI_CFG1		0x02800014
+#define SBI_CFG2		0x02800018
+#define SBI_CFG3		0x0280001c
+#define SBI_STB0		0x02800020
+#define SBI_STB1		0x02800024
+#define SBI_STB2		0x02800028
+#define SBI_STB3		0x0280002c
+#define SBI_INTR_STATE		0x02800030
+#define SBI_INTR_TID		0x02800034
+#define SBI_INTR_DIAG		0x02800038
+
+/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */
+#define SBI_CFG_BURST_MASK	0x0000001e
+
+/* How to make devid from sbi no */
+#define SBI2DEVID(sbino) ((sbino<<4)|2)
+
+/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level
+ *
+ *		   +-------+-------+-------+-------+-------+-------+-------+-------+
+ *  SBUS IRQ LEVEL |   7   |   6   |   5   |   4   |   3   |   2   |   1   |       |
+ *		   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser |
+ *  SLOT #         |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|  ved  |
+ *                 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+
+ *  Bits           31      27      23      19      15      11      7       3      0
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline int acquire_sbi(int devid, int mask)
+{
+	__asm__ __volatile__ ("swapa [%2] %3, %0" :
+			      "=r" (mask) :
+			      "0" (mask),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void release_sbi(int devid, int mask)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+			      "i" (ASI_M_CTL));
+}
+
+static inline void set_sbi_tid(int devid, int targetid)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (targetid),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID),
+			      "i" (ASI_M_CTL));
+}
+
+static inline int get_sbi_ctl(int devid, int cfgno)
+{
+	int cfg;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (cfg) :
+			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+			      "i" (ASI_M_CTL));
+	return cfg;
+}
+
+static inline void set_sbi_ctl(int devid, int cfgno, int cfg)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (cfg),
+			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+			      "i" (ASI_M_CTL));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_SBI_H) */
diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h
new file mode 100644
index 00000000000..f82481ab44d
--- /dev/null
+++ b/arch/sparc/include/asm/sbus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SBUS_H
+#define ___ASM_SPARC_SBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sbus_64.h>
+#else
+#include <asm/sbus_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
new file mode 100644
index 00000000000..a7b4fa21931
--- /dev/null
+++ b/arch/sparc/include/asm/sbus_32.h
@@ -0,0 +1,153 @@
+/*
+ * sbus.h:  Defines for the Sun SBus.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SBUS_H
+#define _SPARC_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+#include <linux/of_device.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0xf8000000
+#define SBUS_OFF_MASK          0x01ffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct of_device	ofdev;
+	struct sbus_bus		*bus;
+	struct sbus_dev		*next;
+	struct sbus_dev		*child;
+	struct sbus_dev		*parent;
+	int prom_node;
+	char prom_name[64];
+	int slot;
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	struct of_device	ofdev;
+	struct sbus_dev		*devices;	/* Link to devices on this SBus */
+	struct sbus_bus		*next;		/* next SBus, if more than one SBus */
+	int			prom_node;	/* PROM device tree node for this SBus */
+	char			prom_name[64];  /* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int devid;
+	int board;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+static inline int
+sbus_is_slave(struct sbus_dev *dev)
+{
+	/* XXX Have to write this for sun4c's */
+	return 0;
+}
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(0) /* actually, sparc_cpu_model==sun4d */
+#define sbus_can_burst64(sdev)		(0) /* actually, sparc_cpu_model==sun4d */
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+/* These yield IOMMU mappings in consistent mode. */
+extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
+extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
+void prom_adjust_ranges(struct linux_prom_ranges *, int,
+			struct linux_prom_ranges *, int);
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
+extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
+extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
+extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
+extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Eric Brower (ebrower@usa.net)
+ * Translate SBus interrupt levels to ino values--
+ * this is used when converting sbus "interrupts" OBP
+ * node values to "intr" node values, and is platform
+ * dependent.  If only we could call OBP with
+ * "sbus-intr>cpu (sbint -- ino)" from kernel...
+ * See .../drivers/sbus/sbus.c for details.
+ */
+BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
+#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC_SBUS_H) */
diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
new file mode 100644
index 00000000000..b606c14343f
--- /dev/null
+++ b/arch/sparc/include/asm/sbus_64.h
@@ -0,0 +1,190 @@
+/* sbus.h: Defines for the Sun SBus.
+ *
+ * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SBUS_H
+#define _SPARC64_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+#include <linux/of_device.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/iommu.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0x00000000
+#define SBUS_OFF_MASK          0x0fffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct of_device	ofdev;
+	struct sbus_bus		*bus;
+	struct sbus_dev		*next;
+	struct sbus_dev		*child;
+	struct sbus_dev		*parent;
+	int prom_node;
+	char prom_name[64];
+	int slot;
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	struct of_device	ofdev;
+	struct sbus_dev		*devices;	/* Tree of SBUS devices	*/
+	struct sbus_bus		*next;		/* Next SBUS in system	*/
+	int			prom_node;      /* OBP node of SBUS	*/
+	char			prom_name[64];	/* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int portid;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(1)
+#define sbus_can_burst64(sdev)		(1)
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size,
+					  dma_addr_t *dma_handle)
+{
+	return dma_alloc_coherent(&sdev->ofdev.dev, size,
+				  dma_handle, GFP_ATOMIC);
+}
+
+static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size,
+					void *vaddr, dma_addr_t dma_handle)
+{
+	return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle);
+}
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr,
+					 size_t size, int direction)
+{
+	return dma_map_single(&sdev->ofdev.dev, ptr, size,
+			      (enum dma_data_direction) direction);
+}
+
+static inline void sbus_unmap_single(struct sbus_dev *sdev,
+				     dma_addr_t dma_addr, size_t size,
+				     int direction)
+{
+	dma_unmap_single(&sdev->ofdev.dev, dma_addr, size,
+			 (enum dma_data_direction) direction);
+}
+
+static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg,
+			      int nents, int direction)
+{
+	return dma_map_sg(&sdev->ofdev.dev, sg, nents,
+			  (enum dma_data_direction) direction);
+}
+
+static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg,
+				 int nents, int direction)
+{
+	dma_unmap_sg(&sdev->ofdev.dev, sg, nents,
+		     (enum dma_data_direction) direction);
+}
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev,
+						dma_addr_t dma_handle,
+						size_t size, int direction)
+{
+	dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size,
+				(enum dma_data_direction) direction);
+}
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+
+static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev,
+						   dma_addr_t dma_handle,
+						   size_t size, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev,
+					    struct scatterlist *sg,
+					    int nents, int direction)
+{
+	dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents,
+			    (enum dma_data_direction) direction);
+}
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+
+static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev,
+					       struct scatterlist *sg,
+					       int nents, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC64_SBUS_H) */
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
new file mode 100644
index 00000000000..ec21a451764
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SCATTERLIST_H
+#define ___ASM_SPARC_SCATTERLIST_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/scatterlist_64.h>
+#else
+#include <asm/scatterlist_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/scatterlist_32.h b/arch/sparc/include/asm/scatterlist_32.h
new file mode 100644
index 00000000000..c82609ca1d0
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist_32.h
@@ -0,0 +1,26 @@
+#ifndef _SPARC_SCATTERLIST_H
+#define _SPARC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+
+	unsigned int length;
+
+	__u32 dvma_address; /* A place to hang host-specific addresses at. */
+	__u32 dvma_length;
+};
+
+#define sg_dma_address(sg) ((sg)->dvma_address)
+#define sg_dma_len(sg)     ((sg)->dvma_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/scatterlist_64.h b/arch/sparc/include/asm/scatterlist_64.h
new file mode 100644
index 00000000000..81bd058f938
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist_64.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_SCATTERLIST_H
+#define _SPARC64_SCATTERLIST_H
+
+#include <asm/page.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+
+	unsigned int	length;
+
+	dma_addr_t	dma_address;
+	__u32		dma_length;
+};
+
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)     	((sg)->dma_length)
+
+#define ISA_DMA_THRESHOLD	(~0UL)
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* !(_SPARC64_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/scratchpad.h b/arch/sparc/include/asm/scratchpad.h
new file mode 100644
index 00000000000..5e8b01fb334
--- /dev/null
+++ b/arch/sparc/include/asm/scratchpad.h
@@ -0,0 +1,14 @@
+#ifndef _SPARC64_SCRATCHPAD_H
+#define _SPARC64_SCRATCHPAD_H
+
+/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD.  */
+
+#define SCRATCHPAD_MMU_MISS	0x00 /* Shared with OBP - set by OBP	    */
+#define SCRATCHPAD_CPUID	0x08 /* Shared with OBP - set by hypervisor */
+#define SCRATCHPAD_UTSBREG1	0x10
+#define SCRATCHPAD_UTSBREG2	0x18
+	/* 0x20 and 0x28, hypervisor only... */
+#define SCRATCHPAD_UNUSED1	0x30
+#define SCRATCHPAD_UNUSED2	0x38 /* Reserved for OBP		    */
+
+#endif /* !(_SPARC64_SCRATCHPAD_H) */
diff --git a/arch/sparc/include/asm/seccomp.h b/arch/sparc/include/asm/seccomp.h
new file mode 100644
index 00000000000..7fcd9968192
--- /dev/null
+++ b/arch/sparc/include/asm/seccomp.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h> /* already defines TIF_32BIT */
+
+#ifndef TIF_32BIT
+#error "unexpected TIF_32BIT on sparc64"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h
new file mode 100644
index 00000000000..c7c69b00967
--- /dev/null
+++ b/arch/sparc/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SECTIONS_H
+#define ___ASM_SPARC_SECTIONS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sections_64.h>
+#else
+#include <asm/sections_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sections_32.h b/arch/sparc/include/asm/sections_32.h
new file mode 100644
index 00000000000..6832841df05
--- /dev/null
+++ b/arch/sparc/include/asm/sections_32.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_SECTIONS_H
+#define _SPARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/sparc/include/asm/sections_64.h b/arch/sparc/include/asm/sections_64.h
new file mode 100644
index 00000000000..3f4b9fdc28d
--- /dev/null
+++ b/arch/sparc/include/asm/sections_64.h
@@ -0,0 +1,9 @@
+#ifndef _SPARC64_SECTIONS_H
+#define _SPARC64_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+extern char _start[];
+
+#endif
diff --git a/arch/sparc/include/asm/sembuf.h b/arch/sparc/include/asm/sembuf.h
new file mode 100644
index 00000000000..faee1be08d6
--- /dev/null
+++ b/arch/sparc/include/asm/sembuf.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_SEMBUF_H
+#define _SPARC_SEMBUF_H
+
+/*
+ * The semid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	PADDING(__pad1)
+	__kernel_time_t	sem_otime;		/* last semop time */
+	PADDING(__pad2)
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+#undef PADDING
+
+#endif /* _SPARC64_SEMBUF_H */
diff --git a/arch/sparc/include/asm/setup.h b/arch/sparc/include/asm/setup.h
new file mode 100644
index 00000000000..2643c62f4ac
--- /dev/null
+++ b/arch/sparc/include/asm/setup.h
@@ -0,0 +1,14 @@
+/*
+ *	Just a place holder. 
+ */
+
+#ifndef _SPARC_SETUP_H
+#define _SPARC_SETUP_H
+
+#if defined(__sparc__) && defined(__arch64__)
+# define COMMAND_LINE_SIZE 2048
+#else
+# define COMMAND_LINE_SIZE 256
+#endif
+
+#endif /* _SPARC_SETUP_H */
diff --git a/arch/sparc/include/asm/sfafsr.h b/arch/sparc/include/asm/sfafsr.h
new file mode 100644
index 00000000000..e96137b04a4
--- /dev/null
+++ b/arch/sparc/include/asm/sfafsr.h
@@ -0,0 +1,82 @@
+#ifndef _SPARC64_SFAFSR_H
+#define _SPARC64_SFAFSR_H
+
+#include <linux/const.h>
+
+/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+#define SFAFSR_ME		(_AC(1,UL) << SFAFSR_ME_SHIFT)
+#define SFAFSR_ME_SHIFT		32
+#define SFAFSR_PRIV		(_AC(1,UL) << SFAFSR_PRIV_SHIFT)
+#define SFAFSR_PRIV_SHIFT	31
+#define SFAFSR_ISAP		(_AC(1,UL) << SFAFSR_ISAP_SHIFT)
+#define SFAFSR_ISAP_SHIFT	30
+#define SFAFSR_ETP		(_AC(1,UL) << SFAFSR_ETP_SHIFT)
+#define SFAFSR_ETP_SHIFT	29
+#define SFAFSR_IVUE		(_AC(1,UL) << SFAFSR_IVUE_SHIFT)
+#define SFAFSR_IVUE_SHIFT	28
+#define SFAFSR_TO		(_AC(1,UL) << SFAFSR_TO_SHIFT)
+#define SFAFSR_TO_SHIFT		27
+#define SFAFSR_BERR		(_AC(1,UL) << SFAFSR_BERR_SHIFT)
+#define SFAFSR_BERR_SHIFT	26
+#define SFAFSR_LDP		(_AC(1,UL) << SFAFSR_LDP_SHIFT)
+#define SFAFSR_LDP_SHIFT	25
+#define SFAFSR_CP		(_AC(1,UL) << SFAFSR_CP_SHIFT)
+#define SFAFSR_CP_SHIFT		24
+#define SFAFSR_WP		(_AC(1,UL) << SFAFSR_WP_SHIFT)
+#define SFAFSR_WP_SHIFT		23
+#define SFAFSR_EDP		(_AC(1,UL) << SFAFSR_EDP_SHIFT)
+#define SFAFSR_EDP_SHIFT	22
+#define SFAFSR_UE		(_AC(1,UL) << SFAFSR_UE_SHIFT)
+#define SFAFSR_UE_SHIFT		21
+#define SFAFSR_CE		(_AC(1,UL) << SFAFSR_CE_SHIFT)
+#define SFAFSR_CE_SHIFT		20
+#define SFAFSR_ETS		(_AC(0xf,UL) << SFAFSR_ETS_SHIFT)
+#define SFAFSR_ETS_SHIFT	16
+#define SFAFSR_PSYND		(_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT)
+#define SFAFSR_PSYND_SHIFT	0
+
+/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read
+ *                     ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write
+ */
+
+#define UDBE_UE			(_AC(1,UL) << 9)
+#define UDBE_CE			(_AC(1,UL) << 8)
+#define UDBE_E_SYNDR		(_AC(0xff,UL) << 0)
+
+/* The trap handlers for asynchronous errors encode the AFSR and
+ * other pieces of information into a 64-bit argument for C code
+ * encoded as follows:
+ *
+ * -----------------------------------------------
+ * |  UDB_H  |  UDB_L  | TL>1  |  TT  |   AFSR   |
+ * -----------------------------------------------
+ *  63     54 53     44    42   41  33 32       0
+ *
+ * The AFAR is passed in unchanged.
+ */
+#define SFSTAT_UDBH_MASK	(_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
+#define SFSTAT_UDBH_SHIFT	54
+#define SFSTAT_UDBL_MASK	(_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
+#define SFSTAT_UDBL_SHIFT	44
+#define SFSTAT_TL_GT_ONE	(_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT)
+#define SFSTAT_TL_GT_ONE_SHIFT	42
+#define SFSTAT_TRAP_TYPE	(_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT)
+#define SFSTAT_TRAP_TYPE_SHIFT	33
+#define SFSTAT_AFSR_MASK	(_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT)
+#define SFSTAT_AFSR_SHIFT	0
+
+/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */
+#define ESTATE_ERR_CE		0x1 /* Correctable errors                    */
+#define ESTATE_ERR_NCE		0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */
+#define ESTATE_ERR_ISAP		0x4 /* System address parity error           */
+#define ESTATE_ERR_ALL		(ESTATE_ERR_CE | \
+				 ESTATE_ERR_NCE | \
+				 ESTATE_ERR_ISAP)
+
+/* The various trap types that report using the above state. */
+#define TRAP_TYPE_IAE		0x09 /* Instruction Access Error             */
+#define TRAP_TYPE_DAE		0x32 /* Data Access Error                    */
+#define TRAP_TYPE_CEE		0x63 /* Correctable ECC Error                */
+
+#endif /* _SPARC64_SFAFSR_H */
diff --git a/arch/sparc/include/asm/sfp-machine.h b/arch/sparc/include/asm/sfp-machine.h
new file mode 100644
index 00000000000..4ebc3823ed4
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SFP_MACHINE_H
+#define ___ASM_SPARC_SFP_MACHINE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sfp-machine_64.h>
+#else
+#include <asm/sfp-machine_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sfp-machine_32.h b/arch/sparc/include/asm/sfp-machine_32.h
new file mode 100644
index 00000000000..01d9c3b5a73
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine_32.h
@@ -0,0 +1,212 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc userland (_Q_*) version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
+  __asm__ ("addcc %r7,%8,%2\n\t"					\
+	   "addxcc %r5,%6,%1\n\t"					\
+	   "addx %r3,%4,%0\n"						\
+	   : "=r" ((USItype)(r2)),					\
+	     "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc")
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
+  __asm__ ("subcc %r7,%8,%2\n\t"					\
+	    "subxcc %r5,%6,%1\n\t"					\
+	    "subx %r3,%4,%0\n"						\
+	   : "=r" ((USItype)(r2)),					\
+	     "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc")
+
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
+  do {									\
+    /* We need to fool gcc,  as we need to pass more than 10		\
+       input/outputs.  */						\
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
+    __asm__ __volatile__ (						\
+	    "addcc %r8,%9,%1\n\t"					\
+	    "addxcc %r6,%7,%0\n\t"					\
+	    "addxcc %r4,%5,%%g2\n\t"					\
+	    "addx %r2,%3,%%g1\n\t"					\
+	   : "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x3)),					\
+	     "rI" ((USItype)(y3)),					\
+	     "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc", "g1", "g2");						\
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
+    r3 = _t1; r2 = _t2;							\
+  } while (0)
+
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
+  do {									\
+    /* We need to fool gcc,  as we need to pass more than 10		\
+       input/outputs.  */						\
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
+    __asm__ __volatile__ (						\
+	    "subcc %r8,%9,%1\n\t"					\
+	    "subxcc %r6,%7,%0\n\t"					\
+	    "subxcc %r4,%5,%%g2\n\t"					\
+	    "subx %r2,%3,%%g1\n\t"					\
+	   : "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x3)),					\
+	     "rI" ((USItype)(y3)),					\
+	     "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc", "g1", "g2");						\
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
+    r3 = _t1; r2 = _t2;							\
+  } while (0)
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0)
+
+#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)					\
+  __asm__ ("addcc %3,%4,%3\n\t"						\
+	   "addxcc %2,%%g0,%2\n\t"					\
+	   "addxcc %1,%%g0,%1\n\t"					\
+	   "addx %0,%%g0,%0\n\t"					\
+	   : "=&r" ((USItype)(x3)),					\
+	     "=&r" ((USItype)(x2)),					\
+	     "=&r" ((USItype)(x1)),					\
+	     "=&r" ((USItype)(x0))					\
+	   : "rI" ((USItype)(i)),					\
+	     "0" ((USItype)(x3)),					\
+	     "1" ((USItype)(x2)),					\
+	     "2" ((USItype)(x1)),					\
+	     "3" ((USItype)(x0))					\
+	   : "cc")
+
+#ifndef CONFIG_SMP
+extern struct task_struct *last_task_used_math;
+#endif
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#ifdef CONFIG_SMP
+#define FP_ROUNDMODE	((current->thread.fsr >> 30) & 0x3)
+#else
+#define FP_ROUNDMODE	((last_task_used_math->thread.fsr >> 30) & 0x3)
+#endif
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1 << 4)
+#define FP_EX_OVERFLOW		(1 << 3)
+#define FP_EX_UNDERFLOW		(1 << 2)
+#define FP_EX_DIVZERO		(1 << 1)
+#define FP_EX_INEXACT		(1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#ifdef CONFIG_SMP
+#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex)
+#else
+#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex)
+#endif
+
+#ifdef CONFIG_SMP
+#define FP_TRAPPING_EXCEPTIONS ((current->thread.fsr >> 23) & 0x1f)
+#else
+#define FP_TRAPPING_EXCEPTIONS ((last_task_used_math->thread.fsr >> 23) & 0x1f)
+#endif
+
+#endif
diff --git a/arch/sparc/include/asm/sfp-machine_64.h b/arch/sparc/include/asm/sfp-machine_64.h
new file mode 100644
index 00000000000..ca913ef40bd
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine_64.h
@@ -0,0 +1,93 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc64 kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz) and
+		  David S. Miller (davem@redhat.com).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#define _FP_W_TYPE_SIZE		64
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv_norm(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1)
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#define FP_ROUNDMODE	((current_thread_info()->xfsr[0] >> 30) & 0x3)
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1 << 4)
+#define FP_EX_OVERFLOW		(1 << 3)
+#define FP_EX_UNDERFLOW		(1 << 2)
+#define FP_EX_DIVZERO		(1 << 1)
+#define FP_EX_INEXACT		(1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#define FP_INHIBIT_RESULTS ((current_thread_info()->xfsr[0] >> 23) & _fex)
+
+#define FP_TRAPPING_EXCEPTIONS ((current_thread_info()->xfsr[0] >> 23) & 0x1f)
+
+#endif
diff --git a/arch/sparc/include/asm/shmbuf.h b/arch/sparc/include/asm/shmbuf.h
new file mode 100644
index 00000000000..83a16055363
--- /dev/null
+++ b/arch/sparc/include/asm/shmbuf.h
@@ -0,0 +1,50 @@
+#ifndef _SPARC_SHMBUF_H
+#define _SPARC_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	PADDING(__pad1)
+	__kernel_time_t		shm_atime;	/* last attach time */
+	PADDING(__pad2)
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	PADDING(__pad3)
+	__kernel_time_t		shm_ctime;	/* last change time */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#undef PADDING
+
+#endif /* _SPARC_SHMBUF_H */
diff --git a/arch/sparc/include/asm/shmparam.h b/arch/sparc/include/asm/shmparam.h
new file mode 100644
index 00000000000..8bf0cfe0694
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SHMPARAM_H
+#define ___ASM_SPARC_SHMPARAM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/shmparam_64.h>
+#else
+#include <asm/shmparam_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/shmparam_32.h b/arch/sparc/include/asm/shmparam_32.h
new file mode 100644
index 00000000000..59a1243c12f
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASMSPARC_SHMPARAM_H
+#define _ASMSPARC_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA 	1
+
+extern int vac_cache_size;
+#define SHMLBA (vac_cache_size ? vac_cache_size : \
+		(sparc_cpu_model == sun4c ? (64 * 1024) : \
+		 (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE)))
+
+#endif /* _ASMSPARC_SHMPARAM_H */
diff --git a/arch/sparc/include/asm/shmparam_64.h b/arch/sparc/include/asm/shmparam_64.h
new file mode 100644
index 00000000000..1ed0d6701a9
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam_64.h
@@ -0,0 +1,10 @@
+#ifndef _ASMSPARC64_SHMPARAM_H
+#define _ASMSPARC64_SHMPARAM_H
+
+#include <asm/spitfire.h>
+
+#define __ARCH_FORCE_SHMLBA	1
+/* attach addr a multiple of this */
+#define	SHMLBA	((PAGE_SIZE > L1DCACHE_SIZE) ? PAGE_SIZE : L1DCACHE_SIZE)
+
+#endif /* _ASMSPARC64_SHMPARAM_H */
diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h
new file mode 100644
index 00000000000..e92de7e286b
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGCONTEXT_H
+#define ___ASM_SPARC_SIGCONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sigcontext_64.h>
+#else
+#include <asm/sigcontext_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sigcontext_32.h b/arch/sparc/include/asm/sigcontext_32.h
new file mode 100644
index 00000000000..c5fb60dcbd7
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext_32.h
@@ -0,0 +1,62 @@
+#ifndef __SPARC_SIGCONTEXT_H
+#define __SPARC_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I. */
+struct sigcontext {
+	int sigc_onstack;      /* state to restore */
+	int sigc_mask;         /* sigmask to restore */
+	int sigc_sp;           /* stack pointer */
+	int sigc_pc;           /* program counter */
+	int sigc_npc;          /* next program counter */
+	int sigc_psr;          /* for condition codes etc */
+	int sigc_g1;           /* User uses these two registers */
+	int sigc_o0;           /* within the trampoline code. */
+
+	/* Now comes information regarding the users window set
+	 * at the time of the signal.
+	 */
+	int sigc_oswins;       /* outstanding windows */
+
+	/* stack ptrs for each regwin buf */
+	char *sigc_spbuf[__SUNOS_MAXWIN];
+
+	/* Windows to restore after signal */
+	struct {
+		unsigned long	locals[8];
+		unsigned long	ins[8];
+	} sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+typedef struct {
+	struct {
+		unsigned long psr;
+		unsigned long pc;
+		unsigned long npc;
+		unsigned long y;
+		unsigned long u_regs[16]; /* globals and ins */
+	}		si_regs;
+	int		si_mask;
+} __siginfo_t;
+
+typedef struct {
+	unsigned   long si_float_regs [32];
+	unsigned   long si_fsr;
+	unsigned   long si_fpqdepth;
+	struct {
+		unsigned long *insn_addr;
+		unsigned long insn;
+	} si_fpqueue [16];
+} __siginfo_fpu_t;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__SPARC_SIGCONTEXT_H) */
diff --git a/arch/sparc/include/asm/sigcontext_64.h b/arch/sparc/include/asm/sigcontext_64.h
new file mode 100644
index 00000000000..1c868d680cf
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext_64.h
@@ -0,0 +1,87 @@
+#ifndef __SPARC64_SIGCONTEXT_H
+#define __SPARC64_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __KERNEL__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I unless we use new 32bit signals or rt signals. */
+struct sigcontext32 {
+	int sigc_onstack;      /* state to restore */
+	int sigc_mask;         /* sigmask to restore */
+	int sigc_sp;           /* stack pointer */
+	int sigc_pc;           /* program counter */
+	int sigc_npc;          /* next program counter */
+	int sigc_psr;          /* for condition codes etc */
+	int sigc_g1;           /* User uses these two registers */
+	int sigc_o0;           /* within the trampoline code. */
+
+	/* Now comes information regarding the users window set
+	 * at the time of the signal.
+	 */
+	int sigc_oswins;       /* outstanding windows */
+
+	/* stack ptrs for each regwin buf */
+	unsigned sigc_spbuf[__SUNOS_MAXWIN];
+
+	/* Windows to restore after signal */
+	struct reg_window32 sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+#endif
+
+#ifdef __KERNEL__
+
+/* This is what we use for 32bit new non-rt signals. */
+
+typedef struct {
+	struct {
+		unsigned int psr;
+		unsigned int pc;
+		unsigned int npc;
+		unsigned int y;
+		unsigned int u_regs[16]; /* globals and ins */
+	}			si_regs;
+	int			si_mask;
+} __siginfo32_t;
+
+#endif
+
+typedef struct {
+	unsigned   int si_float_regs [64];
+	unsigned   long si_fsr;
+	unsigned   long si_gsr;
+	unsigned   long si_fprs;
+} __siginfo_fpu_t;
+
+/* This is what SunOS doesn't, so we have to write this alone
+   and do it properly. */
+struct sigcontext {
+	/* The size of this array has to match SI_MAX_SIZE from siginfo.h */
+	char			sigc_info[128];
+	struct {
+		unsigned long	u_regs[16]; /* globals and ins */
+		unsigned long	tstate;
+		unsigned long	tpc;
+		unsigned long	tnpc;
+		unsigned int	y;
+		unsigned int	fprs;
+	}			sigc_regs;
+	__siginfo_fpu_t *	sigc_fpu_save;
+	struct {
+		void	*	ss_sp;
+		int		ss_flags;
+		unsigned long	ss_size;
+	}			sigc_stack;
+	unsigned long		sigc_mask;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SIGCONTEXT_H) */
diff --git a/arch/sparc/include/asm/siginfo.h b/arch/sparc/include/asm/siginfo.h
new file mode 100644
index 00000000000..bd81f8d7f5c
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGINFO_H
+#define ___ASM_SPARC_SIGINFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/siginfo_64.h>
+#else
+#include <asm/siginfo_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/siginfo_32.h b/arch/sparc/include/asm/siginfo_32.h
new file mode 100644
index 00000000000..3c71af135c5
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo_32.h
@@ -0,0 +1,17 @@
+#ifndef _SPARC_SIGINFO_H
+#define _SPARC_SIGINFO_H
+
+#define __ARCH_SI_UID_T		unsigned int
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+#define SI_NOINFO	32767		/* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
+#define NSIGEMT		1
+
+#endif /* !(_SPARC_SIGINFO_H) */
diff --git a/arch/sparc/include/asm/siginfo_64.h b/arch/sparc/include/asm/siginfo_64.h
new file mode 100644
index 00000000000..c96e6c30f8b
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo_64.h
@@ -0,0 +1,32 @@
+#ifndef _SPARC64_SIGINFO_H
+#define _SPARC64_SIGINFO_H
+
+#define SI_PAD_SIZE32	((SI_MAX_SIZE/sizeof(int)) - 3)
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#define __ARCH_SI_TRAPNO
+#define __ARCH_SI_BAND_T int
+
+#include <asm-generic/siginfo.h>
+
+#ifdef __KERNEL__
+
+#include <linux/compat.h>
+
+#ifdef CONFIG_COMPAT
+
+struct compat_siginfo;
+
+#endif /* CONFIG_COMPAT */
+
+#endif /* __KERNEL__ */
+
+#define SI_NOINFO	32767		/* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
+#define NSIGEMT		1
+
+#endif
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
new file mode 100644
index 00000000000..27ab05dc203
--- /dev/null
+++ b/arch/sparc/include/asm/signal.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGNAL_H
+#define ___ASM_SPARC_SIGNAL_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/signal_64.h>
+#else
+#include <asm/signal_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/signal_32.h b/arch/sparc/include/asm/signal_32.h
new file mode 100644
index 00000000000..96a60ab03ca
--- /dev/null
+++ b/arch/sparc/include/asm/signal_32.h
@@ -0,0 +1,207 @@
+#ifndef _ASMSPARC_SIGNAL_H
+#define _ASMSPARC_SIGNAL_H
+
+#include <asm/sigcontext.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+ * is taken to make libc match.
+ */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG	64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN	32
+#define SIGRTMAX	__NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define	_NSIG		__NEW_NSIG
+#define __new_sigset_t	sigset_t
+#define __new_sigaction	sigaction
+#define __old_sigset_t	old_sigset_t
+#define __old_sigaction	old_sigaction
+#else
+#define _NSIG		__OLD_NSIG
+#define __old_sigset_t	sigset_t
+#define __old_sigaction	sigaction
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;
+
+typedef struct {
+	unsigned long	sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+
+#ifdef __KERNEL__
+/* A SunOS sigstack */
+struct sigstack {
+	char *the_stack;
+	int   cur_status;
+};
+#endif
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_NOMASK	0x20u
+#define SA_NOCLDWAIT	0x100u
+#define SA_SIGINFO	0x200u
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#ifdef __KERNEL__
+/*
+ * DJHR
+ * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_STATIC_ALLOC		0x8000
+#endif
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct __new_sigaction {
+	__sighandler_t	sa_handler;
+	unsigned long	sa_flags;
+	void		(*sa_restorer)(void);	/* Not used by Linux/SPARC */
+	__new_sigset_t	sa_mask;
+};
+
+struct k_sigaction {
+	struct __new_sigaction	sa;
+	void			__user *ka_restorer;
+};
+
+struct __old_sigaction {
+	__sighandler_t	sa_handler;
+	__old_sigset_t	sa_mask;
+	unsigned long	sa_flags;
+	void		(*sa_restorer) (void);	/* not used by Linux/SPARC */
+};
+
+typedef struct sigaltstack {
+	void		__user *ss_sp;
+	int		ss_flags;
+	size_t		ss_size;
+} stack_t;
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/signal_64.h b/arch/sparc/include/asm/signal_64.h
new file mode 100644
index 00000000000..ab1509a101c
--- /dev/null
+++ b/arch/sparc/include/asm/signal_64.h
@@ -0,0 +1,194 @@
+#ifndef _ASMSPARC64_SIGNAL_H
+#define _ASMSPARC64_SIGNAL_H
+
+#include <asm/sigcontext.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG      64
+#define _NSIG_BPW     	64
+#define _NSIG_WORDS   	(__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN       32
+#define SIGRTMAX       __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG			__NEW_NSIG
+#define __new_sigset_t		sigset_t
+#define __new_sigaction		sigaction
+#define __new_sigaction32	sigaction32
+#define __old_sigset_t		old_sigset_t
+#define __old_sigaction		old_sigaction
+#define __old_sigaction32	old_sigaction32
+#else
+#define _NSIG			__OLD_NSIG
+#define NSIG			_NSIG
+#define __old_sigset_t		sigset_t
+#define __old_sigaction		sigaction
+#define __old_sigaction32	sigaction32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;            /* at least 32 bits */
+
+typedef struct {
+       unsigned long sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+/* A SunOS sigstack */
+struct sigstack {
+	/* XXX 32-bit pointers pinhead XXX */
+	char *the_stack;
+	int   cur_status;
+};
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_NOMASK	0x20u
+#define SA_NOCLDWAIT    0x100u
+#define SA_SIGINFO      0x200u
+
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#include <asm-generic/signal.h>
+
+struct __new_sigaction {
+	__sighandler_t		sa_handler;
+	unsigned long		sa_flags;
+	__sigrestore_t 		sa_restorer;  /* not used by Linux/SPARC yet */
+	__new_sigset_t		sa_mask;
+};
+
+struct __old_sigaction {
+	__sighandler_t  	sa_handler;
+	__old_sigset_t  	sa_mask;
+	unsigned long   	sa_flags;
+	void 			(*sa_restorer)(void);     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack {
+	void			__user *ss_sp;
+	int			ss_flags;
+	size_t			ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+struct k_sigaction {
+	struct __new_sigaction 	sa;
+	void __user		*ka_restorer;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC64_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/smp.h b/arch/sparc/include/asm/smp.h
new file mode 100644
index 00000000000..b59672d0e19
--- /dev/null
+++ b/arch/sparc/include/asm/smp.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SMP_H
+#define ___ASM_SPARC_SMP_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/smp_64.h>
+#else
+#include <asm/smp_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h
new file mode 100644
index 00000000000..a8180e546a4
--- /dev/null
+++ b/arch/sparc/include/asm/smp_32.h
@@ -0,0 +1,178 @@
+/* smp.h: Sparc specific SMP stuff.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SMP_H
+#define _SPARC_SMP_H
+
+#include <linux/threads.h>
+#include <asm/head.h>
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/asi.h>
+#include <asm/atomic.h>
+
+/*
+ *	Private routines/data
+ */
+
+extern unsigned char boot_cpu_id;
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map phys_cpu_present_map
+
+typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
+		       unsigned long, unsigned long);
+
+/*
+ *	General functions that each host system must provide.
+ */
+
+void sun4m_init_smp(void);
+void sun4d_init_smp(void);
+
+void smp_callin(void);
+void smp_boot_cpus(void);
+void smp_store_cpu_info(int);
+
+struct seq_file;
+void smp_bogo(struct seq_file *);
+void smp_info(struct seq_file *);
+
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, cpumask_t, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
+BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
+BTFIXUPDEF_BLACKBOX(load_current)
+
+#define smp_cross_call(func,mask,arg1,arg2,arg3,arg4) BTFIXUP_CALL(smp_cross_call)(func,mask,arg1,arg2,arg3,arg4)
+
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, cpu_online_map, 0, 0, 0, 0); }
+static inline void xc1(smpfunc_t func, unsigned long arg1)
+{ smp_cross_call(func, cpu_online_map, arg1, 0, 0, 0); }
+static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, 0, 0); }
+static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3)
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, 0); }
+static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4)
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, arg4); }
+
+static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
+{
+	xc1((smpfunc_t)func, (unsigned long)info);
+	return 0;
+}
+
+static inline int smp_call_function_single(int cpuid, void (*func) (void *info),
+					   void *info, int wait)
+{
+	smp_cross_call((smpfunc_t)func, cpumask_of_cpu(cpuid),
+		       (unsigned long) info, 0, 0, 0);
+	return 0;
+}
+
+static inline int cpu_logical_map(int cpu)
+{
+	return cpu;
+}
+
+static inline int hard_smp4m_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("rd %%tbr, %0\n\t"
+			     "srl %0, 12, %0\n\t"
+			     "and %0, 3, %0\n\t" :
+			     "=&r" (cpuid));
+	return cpuid;
+}
+
+static inline int hard_smp4d_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+			     "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1));
+	return cpuid;
+}
+
+#ifndef MODULE
+static inline int hard_smp_processor_id(void)
+{
+	int cpuid;
+
+	/* Black box - sun4m
+		__asm__ __volatile__("rd %%tbr, %0\n\t"
+				     "srl %0, 12, %0\n\t"
+				     "and %0, 3, %0\n\t" :
+				     "=&r" (cpuid));
+	             - sun4d
+		__asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t"
+				     "nop; nop" :
+				     "=&r" (cpuid));
+	   See btfixup.h and btfixupprep.c to understand how a blackbox works.
+	 */
+	__asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t"
+			     "sethi %%hi(boot_cpu_id), %0\n\t"
+			     "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" :
+			     "=&r" (cpuid));
+	return cpuid;
+}
+#else
+static inline int hard_smp_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("mov %%o7, %%g1\n\t"
+			     "call ___f___hard_smp_processor_id\n\t"
+			     " nop\n\t"
+			     "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2");
+	return cpuid;
+}
+#endif
+
+#define raw_smp_processor_id()		(current_thread_info()->cpu)
+
+#define prof_multiplier(__cpu)		cpu_data(__cpu).multiplier
+#define prof_counter(__cpu)		cpu_data(__cpu).counter
+
+void smp_setup_cpu_possible_map(void);
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Sparc specific messages. */
+#define MSG_CROSS_CALL         0x0005       /* run func on cpus */
+
+/* Empirical PROM processor mailbox constants.  If the per-cpu mailbox
+ * contains something other than one of these then the ipi is from
+ * Linux's active_kernel_processor.  This facility exists so that
+ * the boot monitor can capture all the other cpus when one catches
+ * a watchdog reset or the user enters the monitor using L1-A keys.
+ */
+#define MBOX_STOPCPU          0xFB
+#define MBOX_IDLECPU          0xFC
+#define MBOX_IDLECPU2         0xFD
+#define MBOX_STOPCPU2         0xFE
+
+#else /* SMP */
+
+#define hard_smp_processor_id()		0
+#define smp_setup_cpu_possible_map() do { } while (0)
+
+#endif /* !(SMP) */
+
+#define NO_PROC_ID            0xFF
+
+#endif /* !(_SPARC_SMP_H) */
diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h
new file mode 100644
index 00000000000..57224dd37b3
--- /dev/null
+++ b/arch/sparc/include/asm/smp_64.h
@@ -0,0 +1,67 @@
+/* smp.h: Sparc64 specific SMP stuff.
+ *
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SMP_H
+#define _SPARC64_SMP_H
+
+#include <linux/threads.h>
+#include <asm/asi.h>
+#include <asm/starfire.h>
+#include <asm/spitfire.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+/*
+ *	Private routines/data
+ */
+
+#include <linux/bitops.h>
+#include <asm/atomic.h>
+#include <asm/percpu.h>
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+extern cpumask_t cpu_core_map[NR_CPUS];
+extern int sparc64_multi_core;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ *	General functions that each host system must provide.
+ */
+
+extern int hard_smp_processor_id(void);
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+extern void smp_fill_in_sib_core_maps(void);
+extern void cpu_play_dead(void);
+
+extern void smp_fetch_global_regs(void);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+#endif
+
+#endif /* !(__ASSEMBLY__) */
+
+#else
+
+#define hard_smp_processor_id()		0
+#define smp_fill_in_sib_core_maps() do { } while (0)
+#define smp_fetch_global_regs() do { } while (0)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* !(_SPARC64_SMP_H) */
diff --git a/arch/sparc/include/asm/smpprim.h b/arch/sparc/include/asm/smpprim.h
new file mode 100644
index 00000000000..eb849d862c6
--- /dev/null
+++ b/arch/sparc/include/asm/smpprim.h
@@ -0,0 +1,54 @@
+/*
+ *  smpprim.h:  SMP locking primitives on the Sparc
+ *
+ *  God knows we won't be actually using this code for some time
+ *  but I thought I'd write it since I knew how.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SMPPRIM_H
+#define __SPARC_SMPPRIM_H
+
+/* Test and set the unsigned byte at ADDR to 1.  Returns the previous
+ * value.  On the Sparc we use the ldstub instruction since it is
+ * atomic.
+ */
+
+static inline __volatile__ char test_and_set(void *addr)
+{
+	char state = 0;
+
+	__asm__ __volatile__("ldstub [%0], %1         ! test_and_set\n\t"
+			     "=r" (addr), "=r" (state) :
+			     "0" (addr), "1" (state) : "memory");
+
+	return state;
+}
+
+/* Initialize a spin-lock. */
+static inline __volatile__ smp_initlock(void *spinlock)
+{
+	/* Unset the lock. */
+	*((unsigned char *) spinlock) = 0;
+
+	return;
+}
+
+/* This routine spins until it acquires the lock at ADDR. */
+static inline __volatile__ smp_lock(void *addr)
+{
+	while(test_and_set(addr) == 0xff)
+		;
+
+	/* We now have the lock */
+	return;
+}
+
+/* This routine releases the lock at ADDR. */
+static inline __volatile__ smp_unlock(void *addr)
+{
+	*((unsigned char *) addr) = 0;
+}
+
+#endif /* !(__SPARC_SMPPRIM_H) */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
new file mode 100644
index 00000000000..bf50d0c2d58
--- /dev/null
+++ b/arch/sparc/include/asm/socket.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_PASSCRED	0x0002
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_PEERCRED	0x0040
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_BSDCOMPAT    0x0400
+#define SO_RCVLOWAT     0x0800
+#define SO_SNDLOWAT     0x1000
+#define SO_RCVTIMEO     0x2000
+#define SO_SNDTIMEO     0x4000
+#define SO_ACCEPTCONN	0x8000
+
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define SO_SNDBUFFORCE	0x100a
+#define SO_RCVBUFFORCE	0x100b
+#define SO_ERROR	0x1007
+#define SO_TYPE		0x1008
+
+/* Linux specific, keep the same. */
+#define SO_NO_CHECK	0x000b
+#define SO_PRIORITY	0x000c
+
+#define SO_BINDTODEVICE 0x000d
+
+#define SO_ATTACH_FILTER	0x001a
+#define SO_DETACH_FILTER        0x001b
+
+#define SO_PEERNAME		0x001c
+#define SO_TIMESTAMP		0x001d
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		0x001e
+#define SO_PASSSEC		0x001f
+#define SO_TIMESTAMPNS		0x0021
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			0x0022
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		0x5001
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
+#define SO_SECURITY_ENCRYPTION_NETWORK		0x5004
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/sparc/include/asm/sockios.h b/arch/sparc/include/asm/sockios.h
new file mode 100644
index 00000000000..990ea746486
--- /dev/null
+++ b/arch/sparc/include/asm/sockios.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC_SOCKIOS_H
+#define _ASM_SPARC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* !(_ASM_SPARC_SOCKIOS_H) */
+
diff --git a/arch/sparc/include/asm/sparsemem.h b/arch/sparc/include/asm/sparsemem.h
new file mode 100644
index 00000000000..b99d4e4b6d2
--- /dev/null
+++ b/arch/sparc/include/asm/sparsemem.h
@@ -0,0 +1,12 @@
+#ifndef _SPARC64_SPARSEMEM_H
+#define _SPARC64_SPARSEMEM_H
+
+#ifdef __KERNEL__
+
+#define SECTION_SIZE_BITS       30
+#define MAX_PHYSADDR_BITS       42
+#define MAX_PHYSMEM_BITS        42
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(_SPARC64_SPARSEMEM_H) */
diff --git a/arch/sparc/include/asm/spinlock.h b/arch/sparc/include/asm/spinlock.h
new file mode 100644
index 00000000000..f276b0036b2
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SPINLOCK_H
+#define ___ASM_SPARC_SPINLOCK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/spinlock_64.h>
+#else
+#include <asm/spinlock_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
new file mode 100644
index 00000000000..de2249b267c
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_32.h
@@ -0,0 +1,192 @@
+/* spinlock.h: 32-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SPINLOCK_H
+#define __SPARC_SPINLOCK_H
+
+#include <linux/threads.h>	/* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/psr.h>
+
+#define __raw_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0)
+
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__(
+	"\n1:\n\t"
+	"ldstub	[%0], %%g2\n\t"
+	"orcc	%%g2, 0x0, %%g0\n\t"
+	"bne,a	2f\n\t"
+	" ldub	[%0], %%g2\n\t"
+	".subsection	2\n"
+	"2:\n\t"
+	"orcc	%%g2, 0x0, %%g0\n\t"
+	"bne,a	2b\n\t"
+	" ldub	[%0], %%g2\n\t"
+	"b,a	1b\n\t"
+	".previous\n"
+	: /* no outputs */
+	: "r" (lock)
+	: "g2", "memory", "cc");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned int result;
+	__asm__ __volatile__("ldstub [%1], %0"
+			     : "=r" (result)
+			     : "r" (lock)
+			     : "memory");
+	return (result == 0);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory");
+}
+
+/* Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * XXX This might create some problems with my dual spinlock
+ * XXX scheme, deadlocks etc. -DaveM
+ *
+ * Sort of like atomic_t's on Sparc, but even more clever.
+ *
+ *	------------------------------------
+ *	| 24-bit counter           | wlock |  raw_rwlock_t
+ *	------------------------------------
+ *	 31                       8 7     0
+ *
+ * wlock signifies the one writer is in or somebody is updating
+ * counter. For a writer, if he successfully acquires the wlock,
+ * but counter is non-zero, he has to release the lock and wait,
+ * till both counter and wlock are zero.
+ *
+ * Unfortunately this scheme limits us to ~16,000,000 cpus.
+ */
+static inline void __read_lock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_enter\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define __raw_read_lock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	__read_lock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+static inline void __read_unlock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_exit\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define __raw_read_unlock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	__read_unlock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_write_enter\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+	*(volatile __u32 *)&lp->lock = ~0U;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned int val;
+
+	__asm__ __volatile__("ldstub [%1 + 3], %0"
+			     : "=r" (val)
+			     : "r" (&rw->lock)
+			     : "memory");
+
+	if (val == 0) {
+		val = rw->lock & ~0xff;
+		if (val)
+			((volatile u8*)&rw->lock)[3] = 0;
+		else
+			*(volatile u32*)&rw->lock = ~0U;
+	}
+
+	return (val == 0);
+}
+
+static inline int __read_trylock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	register int res asm("o0");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_try\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: "=r" (res)
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+	return res;
+}
+
+#define __raw_read_trylock(lock) \
+({	unsigned long flags; \
+	int res; \
+	local_irq_save(flags); \
+	res = __read_trylock(lock); \
+	local_irq_restore(flags); \
+	res; \
+})
+
+#define __raw_write_unlock(rw)	do { (rw)->lock = 0; } while(0)
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#define __raw_read_can_lock(rw) (!((rw)->lock & 0xff))
+#define __raw_write_can_lock(rw) (!(rw)->lock)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* __SPARC_SPINLOCK_H */
diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
new file mode 100644
index 00000000000..0006fe9f8c7
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_64.h
@@ -0,0 +1,250 @@
+/* spinlock.h: 64-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_SPINLOCK_H
+#define __SPARC64_SPINLOCK_H
+
+#include <linux/threads.h>	/* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+/* To get debugging spinlocks which detect and catch
+ * deadlock situations, set CONFIG_DEBUG_SPINLOCK
+ * and rebuild your kernel.
+ */
+
+/* All of these locking primitives are expected to work properly
+ * even in an RMO memory model, which currently is what the kernel
+ * runs in.
+ *
+ * There is another issue.  Because we play games to save cycles
+ * in the non-contention case, we need to be extra careful about
+ * branch targets into the "spinning" code.  They live in their
+ * own section, but the newer V9 branches have a shorter range
+ * than the traditional 32-bit sparc branch variants.  The rule
+ * is that the branches that go into and out of the spinner sections
+ * must be pre-V9 branches.
+ */
+
+#define __raw_spin_is_locked(lp)	((lp)->lock != 0)
+
+#define __raw_spin_unlock_wait(lp)	\
+	do {	rmb();			\
+	} while((lp)->lock)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldstub		[%1], %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	brnz,pn		%0, 2f\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	ldub		[%1], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 1b\n"
+"	.previous"
+	: "=&r" (tmp)
+	: "r" (lock)
+	: "memory");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long result;
+
+	__asm__ __volatile__(
+"	ldstub		[%1], %0\n"
+"	membar		#StoreLoad | #StoreStore"
+	: "=r" (result)
+	: "r" (lock)
+	: "memory");
+
+	return (result == 0UL);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__(
+"	membar		#StoreStore | #LoadStore\n"
+"	stb		%%g0, [%0]"
+	: /* No outputs */
+	: "r" (lock)
+	: "memory");
+}
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"1:	ldstub		[%2], %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	brnz,pn		%0, 2f\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	rdpr		%%pil, %1\n"
+"	wrpr		%3, %%pil\n"
+"3:	ldub		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 3b\n"
+"	 nop\n"
+"	ba,pt		%%xcc, 1b\n"
+"	 wrpr		%1, %%pil\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r"(lock), "r"(flags)
+	: "memory");
+}
+
+/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
+
+static void inline __read_lock(raw_rwlock_t *lock)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__ (
+"1:	ldsw		[%2], %0\n"
+"	brlz,pn		%0, 2f\n"
+"4:	 add		%0, 1, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	ldsw		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brlz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 4b\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+}
+
+static int inline __read_trylock(raw_rwlock_t *lock)
+{
+	int tmp1, tmp2;
+
+	__asm__ __volatile__ (
+"1:	ldsw		[%2], %0\n"
+"	brlz,a,pn	%0, 2f\n"
+"	 mov		0, %0\n"
+"	add		%0, 1, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 mov		1, %0\n"
+"2:"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+
+	return tmp1;
+}
+
+static void inline __read_unlock(raw_rwlock_t *lock)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar	#StoreLoad | #LoadLoad\n"
+"1:	lduw	[%2], %0\n"
+"	sub	%0, 1, %1\n"
+"	cas	[%2], %0, %1\n"
+"	cmp	%0, %1\n"
+"	bne,pn	%%xcc, 1b\n"
+"	 nop"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+}
+
+static void inline __write_lock(raw_rwlock_t *lock)
+{
+	unsigned long mask, tmp1, tmp2;
+
+	mask = 0x80000000UL;
+
+	__asm__ __volatile__(
+"1:	lduw		[%2], %0\n"
+"	brnz,pn		%0, 2f\n"
+"4:	 or		%0, %3, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	lduw		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 4b\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock), "r" (mask)
+	: "memory");
+}
+
+static void inline __write_unlock(raw_rwlock_t *lock)
+{
+	__asm__ __volatile__(
+"	membar		#LoadStore | #StoreStore\n"
+"	stw		%%g0, [%0]"
+	: /* no outputs */
+	: "r" (lock)
+	: "memory");
+}
+
+static int inline __write_trylock(raw_rwlock_t *lock)
+{
+	unsigned long mask, tmp1, tmp2, result;
+
+	mask = 0x80000000UL;
+
+	__asm__ __volatile__(
+"	mov		0, %2\n"
+"1:	lduw		[%3], %0\n"
+"	brnz,pn		%0, 2f\n"
+"	 or		%0, %4, %1\n"
+"	cas		[%3], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	mov		1, %2\n"
+"2:"
+	: "=&r" (tmp1), "=&r" (tmp2), "=&r" (result)
+	: "r" (lock), "r" (mask)
+	: "memory");
+
+	return result;
+}
+
+#define __raw_read_lock(p)	__read_lock(p)
+#define __raw_read_trylock(p)	__read_trylock(p)
+#define __raw_read_unlock(p)	__read_unlock(p)
+#define __raw_write_lock(p)	__write_lock(p)
+#define __raw_write_unlock(p)	__write_unlock(p)
+#define __raw_write_trylock(p)	__write_trylock(p)
+
+#define __raw_read_can_lock(rw)		(!((rw)->lock & 0x80000000UL))
+#define __raw_write_can_lock(rw)	(!(rw)->lock)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SPINLOCK_H) */
diff --git a/arch/sparc/include/asm/spinlock_types.h b/arch/sparc/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..37cbe01c585
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef __SPARC_SPINLOCK_TYPES_H
+#define __SPARC_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned char lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h
new file mode 100644
index 00000000000..985ea7e3199
--- /dev/null
+++ b/arch/sparc/include/asm/spitfire.h
@@ -0,0 +1,342 @@
+/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SPITFIRE_H
+#define _SPARC64_SPITFIRE_H
+
+#include <asm/asi.h>
+
+/* The following register addresses are accessible via ASI_DMMU
+ * and ASI_IMMU, that is there is a distinct and unique copy of
+ * each these registers for each TLB.
+ */
+#define TSB_TAG_TARGET		0x0000000000000000 /* All chips				*/
+#define TLB_SFSR		0x0000000000000018 /* All chips				*/
+#define TSB_REG			0x0000000000000028 /* All chips				*/
+#define TLB_TAG_ACCESS		0x0000000000000030 /* All chips				*/
+#define VIRT_WATCHPOINT		0x0000000000000038 /* All chips				*/
+#define PHYS_WATCHPOINT		0x0000000000000040 /* All chips				*/
+#define TSB_EXTENSION_P		0x0000000000000048 /* Ultra-III and later		*/
+#define TSB_EXTENSION_S		0x0000000000000050 /* Ultra-III and later, D-TLB only	*/
+#define TSB_EXTENSION_N		0x0000000000000058 /* Ultra-III and later		*/
+#define TLB_TAG_ACCESS_EXT	0x0000000000000060 /* Ultra-III+ and later		*/
+
+/* These registers only exist as one entity, and are accessed
+ * via ASI_DMMU only.
+ */
+#define PRIMARY_CONTEXT		0x0000000000000008
+#define SECONDARY_CONTEXT	0x0000000000000010
+#define DMMU_SFAR		0x0000000000000020
+#define VIRT_WATCHPOINT		0x0000000000000038
+#define PHYS_WATCHPOINT		0x0000000000000040
+
+#define SPITFIRE_HIGHEST_LOCKED_TLBENT	(64 - 1)
+#define CHEETAH_HIGHEST_LOCKED_TLBENT	(16 - 1)
+
+#define L1DCACHE_SIZE		0x4000
+
+#define SUN4V_CHIP_INVALID	0x00
+#define SUN4V_CHIP_NIAGARA1	0x01
+#define SUN4V_CHIP_NIAGARA2	0x02
+#define SUN4V_CHIP_UNKNOWN	0xff
+
+#ifndef __ASSEMBLY__
+
+enum ultra_tlb_layout {
+	spitfire = 0,
+	cheetah = 1,
+	cheetah_plus = 2,
+	hypervisor = 3,
+};
+
+extern enum ultra_tlb_layout tlb_type;
+
+extern int sun4v_chip_type;
+
+extern int cheetah_pcache_forced_on;
+extern void cheetah_enable_pcache(void);
+
+#define sparc64_highest_locked_tlbent()	\
+	(tlb_type == spitfire ? \
+	 SPITFIRE_HIGHEST_LOCKED_TLBENT : \
+	 CHEETAH_HIGHEST_LOCKED_TLBENT)
+
+extern int num_kernel_image_mappings;
+
+/* The data cache is write through, so this just invalidates the
+ * specified line.
+ */
+static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
+}
+
+/* The instruction cache lines are flushed with this, but note that
+ * this does not flush the pipeline.  It is possible for a line to
+ * get flushed but stale instructions to still be in the pipeline,
+ * a flush instruction (to any address) is sufficient to handle
+ * this issue after the line is invalidated.
+ */
+static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (tag), "r" (addr), "i" (ASI_IC_TAG));
+}
+
+static inline unsigned long spitfire_get_dtlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS));
+
+	/* Clear TTE diag bits. */
+	data &= ~0x0003fe0000000000UL;
+
+	return data;
+}
+
+static inline unsigned long spitfire_get_dtlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ));
+	return tag;
+}
+
+static inline void spitfire_put_dtlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" (entry << 3),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline unsigned long spitfire_get_itlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS));
+
+	/* Clear TTE diag bits. */
+	data &= ~0x0003fe0000000000UL;
+
+	return data;
+}
+
+static inline unsigned long spitfire_get_itlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ));
+	return tag;
+}
+
+static inline void spitfire_put_itlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" (entry << 3),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP));
+}
+
+static inline void spitfire_flush_itlb_nucleus_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has "all non-locked" tlb flushes. */
+static inline void cheetah_flush_dtlb_all(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x80), "i" (ASI_DMMU_DEMAP));
+}
+
+static inline void cheetah_flush_itlb_all(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x80), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has a 4-tlb layout so direct access is a bit different.
+ * The first two TLBs are fully assosciative, hold 16 entries, and are
+ * used only for locked and >8K sized translations.  One exists for
+ * data accesses and one for instruction accesses.
+ *
+ * The third TLB is for data accesses to 8K non-locked translations, is
+ * 2 way assosciative, and holds 512 entries.  The fourth TLB is for
+ * instruction accesses to 8K non-locked translations, is 2 way
+ * assosciative, and holds 128 entries.
+ *
+ * Cheetah has some bug where bogus data can be returned from
+ * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes
+ * the problem for me. -DaveM
+ */
+static inline unsigned long cheetah_get_ldtlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_DTLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_litlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_ITLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_ldtlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_DTLB_TAG_READ));
+
+	return tag;
+}
+
+static inline unsigned long cheetah_get_litlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_ITLB_TAG_READ));
+
+	return tag;
+}
+
+static inline void cheetah_put_ldtlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((0 << 16) | (entry << 3)),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline void cheetah_put_litlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((0 << 16) | (entry << 3)),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ));
+	return tag;
+}
+
+static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((tlb << 16) | (entry << 3)),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline unsigned long cheetah_get_itlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((2 << 16) | (entry << 3)),
+                               "i" (ASI_ITLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_itlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ));
+	return tag;
+}
+
+static inline void cheetah_put_itlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" ((2 << 16) | (entry << 3)),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_SPITFIRE_H) */
diff --git a/arch/sparc/include/asm/sstate.h b/arch/sparc/include/asm/sstate.h
new file mode 100644
index 00000000000..a7c35dbcb28
--- /dev/null
+++ b/arch/sparc/include/asm/sstate.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SSTATE_H
+#define _SPARC64_SSTATE_H
+
+extern void sstate_booting(void);
+extern void sstate_running(void);
+extern void sstate_halt(void);
+extern void sstate_poweroff(void);
+extern void sstate_panic(void);
+extern void sstate_reboot(void);
+
+extern void sun4v_sstate_init(void);
+
+#endif /* _SPARC64_SSTATE_H */
diff --git a/arch/sparc/include/asm/stacktrace.h b/arch/sparc/include/asm/stacktrace.h
new file mode 100644
index 00000000000..6cee39adf6d
--- /dev/null
+++ b/arch/sparc/include/asm/stacktrace.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_STACKTRACE_H
+#define _SPARC64_STACKTRACE_H
+
+extern void stack_trace_flush(void);
+
+#endif /* _SPARC64_STACKTRACE_H */
diff --git a/arch/sparc/include/asm/starfire.h b/arch/sparc/include/asm/starfire.h
new file mode 100644
index 00000000000..07bafd31e33
--- /dev/null
+++ b/arch/sparc/include/asm/starfire.h
@@ -0,0 +1,21 @@
+/*
+ * starfire.h: Group all starfire specific code together.
+ *
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC64_STARFIRE_H
+#define _SPARC64_STARFIRE_H
+
+#ifndef __ASSEMBLY__
+
+extern int this_is_starfire;
+
+extern void check_if_starfire(void);
+extern void starfire_cpu_setup(void);
+extern int starfire_hard_smp_processor_id(void);
+extern void starfire_hookup(int);
+extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);
+
+#endif
+#endif
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
new file mode 100644
index 00000000000..d8153013df7
--- /dev/null
+++ b/arch/sparc/include/asm/stat.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STAT_H
+#define ___ASM_SPARC_STAT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/stat_64.h>
+#else
+#include <asm/stat_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/stat_32.h b/arch/sparc/include/asm/stat_32.h
new file mode 100644
index 00000000000..2299e1d5d94
--- /dev/null
+++ b/arch/sparc/include/asm/stat_32.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC_STAT_H
+#define _SPARC_STAT_H
+
+#include <linux/types.h>
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short	st_dev;
+	unsigned long	st_ino;
+	unsigned short	st_mode;
+	short		st_nlink;
+	unsigned short	st_uid;
+	unsigned short	st_gid;
+	unsigned short	st_rdev;
+	long		st_size;
+	long		st_atime;
+	unsigned long	st_atime_nsec;
+	long		st_mtime;
+	unsigned long	st_mtime_nsec;
+	long		st_ctime;
+	unsigned long	st_ctime_nsec;
+	long		st_blksize;
+	long		st_blocks;
+	unsigned long	__unused4[2];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat64 {
+	unsigned long long st_dev;
+
+	unsigned long long st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#endif
diff --git a/arch/sparc/include/asm/stat_64.h b/arch/sparc/include/asm/stat_64.h
new file mode 100644
index 00000000000..9650fdea847
--- /dev/null
+++ b/arch/sparc/include/asm/stat_64.h
@@ -0,0 +1,47 @@
+#ifndef _SPARC64_STAT_H
+#define _SPARC64_STAT_H
+
+#include <linux/types.h>
+
+struct stat {
+	unsigned   st_dev;
+	ino_t   st_ino;
+	mode_t  st_mode;
+	short   st_nlink;
+	uid_t   st_uid;
+	gid_t   st_gid;
+	unsigned   st_rdev;
+	off_t   st_size;
+	time_t  st_atime;
+	time_t  st_mtime;
+	time_t  st_ctime;
+	off_t   st_blksize;
+	off_t   st_blocks;
+	unsigned long  __unused4[2];
+};
+
+struct stat64 {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+
+	unsigned long	st_rdev;
+	long		st_size;
+	long		st_blksize;
+	long		st_blocks;
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	long		__unused[3];
+};
+
+#endif
diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h
new file mode 100644
index 00000000000..5e937a73743
--- /dev/null
+++ b/arch/sparc/include/asm/statfs.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STATFS_H
+#define ___ASM_SPARC_STATFS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/statfs_64.h>
+#else
+#include <asm/statfs_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/statfs_32.h b/arch/sparc/include/asm/statfs_32.h
new file mode 100644
index 00000000000..304520fa886
--- /dev/null
+++ b/arch/sparc/include/asm/statfs_32.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_STATFS_H
+#define _SPARC_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/arch/sparc/include/asm/statfs_64.h b/arch/sparc/include/asm/statfs_64.h
new file mode 100644
index 00000000000..79b3c890a5f
--- /dev/null
+++ b/arch/sparc/include/asm/statfs_64.h
@@ -0,0 +1,54 @@
+#ifndef _SPARC64_STATFS_H
+#define _SPARC64_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif
diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h
new file mode 100644
index 00000000000..98b72a0c8e6
--- /dev/null
+++ b/arch/sparc/include/asm/string.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STRING_H
+#define ___ASM_SPARC_STRING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/string_64.h>
+#else
+#include <asm/string_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/string_32.h b/arch/sparc/include/asm/string_32.h
new file mode 100644
index 00000000000..6c5fddb7e6b
--- /dev/null
+++ b/arch/sparc/include/asm/string_32.h
@@ -0,0 +1,205 @@
+/*
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC_STRING_H__
+#define __SPARC_STRING_H__
+
+#include <asm/page.h>
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+extern void __memmove(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+#undef memmove
+#define memmove(_to, _from, _n) \
+({ \
+	void *_t = (_to); \
+	__memmove(_t, (_from), (_n)); \
+	_t; \
+})
+
+#define __HAVE_ARCH_MEMCPY
+
+static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	extern void __copy_1page(void *, const void *);
+
+	if(n <= 32) {
+		__builtin_memcpy(to, from, n);
+	} else if (((unsigned int) to & 7) != 0) {
+		/* Destination is not aligned on the double-word boundary */
+		__memcpy(to, from, n);
+	} else {
+		switch(n) {
+		case PAGE_SIZE:
+			__copy_1page(to, from);
+			break;
+		default:
+			__memcpy(to, from, n);
+			break;
+		}
+	}
+	return to;
+}
+
+static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	__memcpy(to, from, n);
+	return to;
+}
+
+#undef memcpy
+#define memcpy(t, f, n) \
+(__builtin_constant_p(n) ? \
+ __constant_memcpy((t),(f),(n)) : \
+ __nonconstant_memcpy((t),(f),(n)))
+
+#define __HAVE_ARCH_MEMSET
+
+static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count)
+{
+	extern void bzero_1page(void *);
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if(!c) {
+		if(count == PAGE_SIZE)
+			bzero_1page(s);
+		else
+			__bzero(s, count);
+	} else {
+		__memset(s, c, count);
+	}
+	return s;
+}
+
+static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count)
+{
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if(!c)
+		__bzero(s, count);
+	else
+		__memset(s, c, count);
+	return s;
+}
+
+static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count)
+{
+	__memset(s, c, count);
+	return s;
+}
+
+#undef memset
+#define memset(s, c, count) \
+(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \
+                            __constant_c_and_count_memset((s), (c), (count)) : \
+                            __constant_c_memset((s), (c), (count))) \
+                          : __nonconstant_memset((s), (c), (count)))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)						\
+({										\
+	extern void *__memscan_zero(void *, size_t);				\
+	extern void *__memscan_generic(void *, int, size_t);			\
+	void *__retval, *__addr = (__arg0);					\
+	size_t __size = (__arg2);						\
+										\
+	if(__builtin_constant_p(__char) && !(__char))				\
+		__retval = __memscan_zero(__addr, __size);			\
+	else									\
+		__retval = __memscan_generic(__addr, (__char), __size);		\
+										\
+	__retval;								\
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+
+extern int __strncmp(const char *, const char *, __kernel_size_t);
+
+static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count)
+{
+	register int retval;
+	switch(count) {
+	case 0: return 0;
+	case 1: return (src[0] - dest[0]);
+	case 2: retval = (src[0] - dest[0]);
+		if(!retval && src[0])
+		  retval = (src[1] - dest[1]);
+		return retval;
+	case 3: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1])
+		    retval = (src[2] - dest[2]);
+		}
+		return retval;
+	case 4: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if (!retval && src[2])
+		      retval = (src[3] - dest[3]);
+		  }
+		}
+		return retval;
+	case 5: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if (!retval && src[2]) {
+		      retval = (src[3] - dest[3]);
+		      if (!retval && src[3])
+		        retval = (src[4] - dest[4]);
+		    }
+		  }
+		}
+		return retval;
+	default:
+		retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if(!retval && src[2])
+		      retval = __strncmp(src+3,dest+3,count-3);
+		  }
+		}
+		return retval;
+	}
+}
+
+#undef strncmp
+#define strncmp(__arg0, __arg1, __arg2)	\
+(__builtin_constant_p(__arg2) ?	\
+ __constant_strncmp(__arg0, __arg1, __arg2) : \
+ __strncmp(__arg0, __arg1, __arg2))
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC_STRING_H__) */
diff --git a/arch/sparc/include/asm/string_64.h b/arch/sparc/include/asm/string_64.h
new file mode 100644
index 00000000000..43161f2d17e
--- /dev/null
+++ b/arch/sparc/include/asm/string_64.h
@@ -0,0 +1,83 @@
+/*
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997,1999 Jakub Jelinek (jakub@redhat.com)
+ */
+
+#ifndef __SPARC64_STRING_H__
+#define __SPARC64_STRING_H__
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+#include <asm/asi.h>
+
+extern void *__memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMSET
+extern void *__builtin_memset(void *,int,__kernel_size_t);
+
+static inline void *__constant_memset(void *s, int c, __kernel_size_t count)
+{
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if (!c) {
+		__bzero(s, count);
+		return s;
+	} else
+		return __memset(s, c, count);
+}
+
+#undef memset
+#define memset(s, c, count) \
+((__builtin_constant_p(count) && (count) <= 32) ? \
+ __builtin_memset((s), (c), (count)) : \
+ (__builtin_constant_p(c) ? \
+  __constant_memset((s), (c), (count)) : \
+  __memset((s), (c), (count))))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)					\
+({									\
+	extern void *__memscan_zero(void *, size_t);			\
+	extern void *__memscan_generic(void *, int, size_t);		\
+	void *__retval, *__addr = (__arg0);				\
+	size_t __size = (__arg2);					\
+									\
+	if(__builtin_constant_p(__char) && !(__char))			\
+		__retval = __memscan_zero(__addr, __size);		\
+	else								\
+		__retval = __memscan_generic(__addr, (__char), __size);	\
+									\
+	__retval;							\
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *, const char *, __kernel_size_t);
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC64_STRING_H__) */
diff --git a/arch/sparc/include/asm/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h
new file mode 100644
index 00000000000..d52985f19f4
--- /dev/null
+++ b/arch/sparc/include/asm/sun4paddr.h
@@ -0,0 +1,56 @@
+/*
+ * sun4paddr.h:  Various physical addresses on sun4 machines
+ *
+ * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
+ * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
+ * 
+ * Now supports more sun4's
+ */
+
+#ifndef _SPARC_SUN4PADDR_H
+#define _SPARC_SUN4PADDR_H
+
+#define SUN4_IE_PHYSADDR		0xf5000000
+#define SUN4_UNUSED_PHYSADDR		0
+
+/* these work for me */
+#define SUN4_200_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_200_CLOCK_PHYSADDR		0xf3000000
+#define SUN4_200_BWTWO_PHYSADDR		0xfd000000
+#define SUN4_200_ETH_PHYSADDR		0xf6000000
+#define SUN4_200_SI_PHYSADDR		0xff200000
+
+/* these were here before */
+#define SUN4_300_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_300_CLOCK_PHYSADDR		0xf2000000
+#define SUN4_300_TIMER_PHYSADDR		0xef000000
+#define SUN4_300_ETH_PHYSADDR		0xf9000000
+#define SUN4_300_BWTWO_PHYSADDR		0xfb400000
+#define SUN4_300_DMA_PHYSADDR		0xfa001000
+#define SUN4_300_ESP_PHYSADDR		0xfa000000
+
+/* Are these right? */
+#define SUN4_400_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_400_CLOCK_PHYSADDR		0xf2000000
+#define SUN4_400_TIMER_PHYSADDR		0xef000000
+#define SUN4_400_ETH_PHYSADDR		0xf9000000
+#define SUN4_400_BWTWO_PHYSADDR		0xfb400000
+#define SUN4_400_DMA_PHYSADDR		0xfa001000
+#define SUN4_400_ESP_PHYSADDR		0xfa000000
+
+/* 
+	these are the actual values set and used in the code. Unused items set 
+	to SUN_UNUSED_PHYSADDR 
+ */
+
+extern int sun4_memreg_physaddr; /* memory register (ecc?) */
+extern int sun4_clock_physaddr;  /* system clock */
+extern int sun4_timer_physaddr;  /* timer, where applicable */
+extern int sun4_eth_physaddr;    /* onboard ethernet (ie/le) */
+extern int sun4_si_physaddr;     /* sun3 scsi adapter */
+extern int sun4_bwtwo_physaddr;  /* onboard bw2 */
+extern int sun4_dma_physaddr;    /* scsi dma */
+extern int sun4_esp_physaddr;    /* esp scsi */
+extern int sun4_ie_physaddr;     /* interrupt enable */
+
+#endif /* !(_SPARC_SUN4PADDR_H) */
diff --git a/arch/sparc/include/asm/sun4prom.h b/arch/sparc/include/asm/sun4prom.h
new file mode 100644
index 00000000000..9c8b4cbf629
--- /dev/null
+++ b/arch/sparc/include/asm/sun4prom.h
@@ -0,0 +1,83 @@
+/*
+ * sun4prom.h -- interface to sun4 PROM monitor.  We don't use most of this,
+ *               so most of these are just placeholders.
+ */
+
+#ifndef _SUN4PROM_H_
+#define _SUN4PROM_H_
+
+/*
+ * Although this looks similar to an romvec for a OpenProm machine, it is 
+ * actually closer to what was used in the Sun2 and Sun3.
+ *
+ * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
+ * 
+ * Many of the function prototypes are guesses.  Some are certainly wrong.
+ * Use with care.
+ */
+
+typedef struct {
+	char		*initSP;		/* Initial system stack ptr */
+	void		(*startmon)(void);	/* Initial PC for hardware */
+	int		*diagberr;		/* Bus err handler for diags */
+	struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
+ 	unsigned int	*memorysize;		/* Usable memory in bytes */
+	unsigned char	(*getchar)(void);	/* Get char from input device */ 
+	void		(*putchar)(char);	/* Put char to output device */
+	int		(*mayget)(void);	/* Maybe get char, or -1 */
+	int		(*mayput)(int);		/* Maybe put char, or -1 */
+	unsigned char	*echo;			/* Should getchar echo? */
+	unsigned char	*insource;		/* Input source selector */
+	unsigned char	*outsink;		/* Output sink selector */
+	int		(*getkey)(void);	/* Get next key if one exists */
+	void		(*initgetkey)(void);	/* Initialize get key */
+	unsigned int	*translation;		/* Kbd translation selector */
+	unsigned char	*keybid;		/* Keyboard ID byte */
+	int		*screen_x;		/* V2: Screen x pos (r/o) */
+	int		*screen_y;		/* V2: Screen y pos (r/o) */
+	struct keybuf	*keybuf;		/* Up/down keycode buffer */
+	char		*monid;			/* Monitor version ID */
+	void		(*fbwritechar)(char);	/* Write a character to FB */
+	int		*fbAddr;		/* Address of frame buffer */
+	char		**font;			/* Font table for FB */
+	void		(*fbwritestr)(char *);	/* Write string to FB */
+	void		(*reboot)(char *);	/* e.g. reboot("sd()vmlinux") */
+	unsigned char	*linebuf;		/* The line input buffer */
+	unsigned char	**lineptr;		/* Cur pointer into linebuf */
+	int		*linesize;		/* length of line in linebuf */
+	void		(*getline)(char *);	/* Get line from user */
+	unsigned char	(*getnextchar)(void);	/* Get next char from linebuf */
+	unsigned char	(*peeknextchar)(void);	/* Peek at next char */
+	int		*fbthere;		/* =1 if frame buffer there */
+	int		(*getnum)(void);	/* Grab hex num from line */
+	int		(*printf)(char *, ...);	/* See prom_printf() instead */ 
+	void		(*printhex)(int);	/* Format N digits in hex */
+	unsigned char	*leds;			/* RAM copy of LED register */
+	void		(*setLEDs)(unsigned char *);	/* Sets LED's and RAM copy */
+	void		(*NMIaddr)(void *);	/* Addr for level 7 vector */
+	void		(*abortentry)(void);	/* Entry for keyboard abort */
+	int		*nmiclock;		/* Counts up in msec */
+	int		*FBtype;		/* Frame buffer type */
+ 	unsigned int	romvecversion;		/* Version number for this romvec */
+	struct globram  *globram;		/* monitor global variables ??? */
+	void *		kbdaddr;		/* Addr of keyboard in use */
+	int		*keyrinit;		/* ms before kbd repeat */
+	unsigned char	*keyrtick; 		/* ms between repetitions */
+	unsigned int	*memoryavail;		/* V1: Main mem usable size */
+	long		*resetaddr;		/* where to jump on a reset */
+	long		*resetmap;		/* pgmap entry for resetaddr */
+	void		(*exittomon)(void);	/* Exit from user program */
+	unsigned char	**memorybitmap;		/* V1: &{0 or &bits} */
+	void		(*setcxsegmap)(int ctxt, char *va, int pmeg);	/* Set seg in any context */
+	void		(**vector_cmd)(void *);	/* V2: Handler for 'v' cmd */
+	unsigned long	*expectedtrapsig;	/* V3: Location of the expected trap signal */
+	unsigned long	*trapvectorbasetable;	/* V3: Address of the trap vector table */
+	int		unused1;
+	int		unused2;
+	int		unused3;
+	int		unused4;
+} linux_sun4_romvec;
+
+extern linux_sun4_romvec *sun4_romvec;
+
+#endif /* _SUN4PROM_H_ */
diff --git a/arch/sparc/include/asm/sunbpp.h b/arch/sparc/include/asm/sunbpp.h
new file mode 100644
index 00000000000..d81a02eaf78
--- /dev/null
+++ b/arch/sparc/include/asm/sunbpp.h
@@ -0,0 +1,80 @@
+/*
+ * include/asm/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC_SUNBPP_H
+#define _ASM_SPARC_SUNBPP_H
+
+struct bpp_regs {
+  /* DMA registers */
+  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
+  __volatile__ __u32 p_addr;		/* Address Register */
+  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
+  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
+  /* Parallel Port registers */
+  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
+  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
+  __volatile__ __u8 p_dr;		/* Parallel Data Register */
+  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
+  __volatile__ __u8 p_or;		/* Output Register */
+  __volatile__ __u8 p_ir;		/* Input Register */
+  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* P_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* P_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* P_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/arch/sparc/include/asm/swift.h b/arch/sparc/include/asm/swift.h
new file mode 100644
index 00000000000..e535061bf75
--- /dev/null
+++ b/arch/sparc/include/asm/swift.h
@@ -0,0 +1,106 @@
+/* swift.h: Specific definitions for the _broken_ Swift SRMMU
+ *          MMU module.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SWIFT_H
+#define _SPARC_SWIFT_H
+
+/* Swift is so brain damaged, here is the mmu control register. */
+#define SWIFT_ST       0x00800000   /* SW tablewalk enable */
+#define SWIFT_WP       0x00400000   /* Watchpoint enable   */
+
+/* Branch folding (buggy, disable on production systems!)  */
+#define SWIFT_BF       0x00200000
+#define SWIFT_PMC      0x00180000   /* Page mode control   */
+#define SWIFT_PE       0x00040000   /* Parity enable       */
+#define SWIFT_PC       0x00020000   /* Parity control      */
+#define SWIFT_AP       0x00010000   /* Graphics page mode control (TCX/SX) */
+#define SWIFT_AC       0x00008000   /* Alternate Cacheability (see viking.h) */
+#define SWIFT_BM       0x00004000   /* Boot mode */
+#define SWIFT_RC       0x00003c00   /* DRAM refresh control */
+#define SWIFT_IE       0x00000200   /* Instruction cache enable */
+#define SWIFT_DE       0x00000100   /* Data cache enable */
+#define SWIFT_SA       0x00000080   /* Store Allocate */
+#define SWIFT_NF       0x00000002   /* No fault mode */
+#define SWIFT_EN       0x00000001   /* MMU enable */
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void swift_inv_insn_tag(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
+			     : "memory");
+}
+
+/* Bits [12:4] select one of 512 data cache tags */
+static inline void swift_inv_data_tag(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+			     : "memory");
+}
+
+static inline void swift_flush_dcache(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x2000; addr += 0x10)
+		swift_inv_data_tag(addr);
+}
+
+static inline void swift_flush_icache(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x4000; addr += 0x20)
+		swift_inv_insn_tag(addr);
+}
+
+static inline void swift_idflash_clear(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x2000; addr += 0x10) {
+		swift_inv_insn_tag(addr<<1);
+		swift_inv_data_tag(addr);
+	}
+}
+
+/* Swift is so broken, it isn't even safe to use the following. */
+static inline void swift_flush_page(unsigned long page)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+			     : "memory");
+}
+
+static inline void swift_flush_segment(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_FLUSH_SEG)
+			     : "memory");
+}
+
+static inline void swift_flush_region(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_FLUSH_REGION)
+			     : "memory");
+}
+
+static inline void swift_flush_context(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_CTX)
+			     : "memory");
+}
+
+#endif /* !(_SPARC_SWIFT_H) */
diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h
new file mode 100644
index 00000000000..7486c605e23
--- /dev/null
+++ b/arch/sparc/include/asm/syscall.h
@@ -0,0 +1,120 @@
+#ifndef __ASM_SPARC_SYSCALL_H
+#define __ASM_SPARC_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in %g1 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	int syscall_p = pt_regs_is_syscall(regs);
+
+	return (syscall_p ? regs->u_regs[UREG_G1] : -1L);
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* XXX This needs some thought.  On Sparc we don't
+	 * XXX save away the original %o0 value somewhere.
+	 * XXX Instead we hold it in register %l5 at the top
+	 * XXX level trap frame and pass this down to the signal
+	 * XXX dispatch code which is the only place that value
+	 * XXX ever was needed.
+	 */
+}
+
+#ifdef CONFIG_SPARC32
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_C) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->psr |= PSR_C;
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->psr &= ~PSR_C;
+}
+#else
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->tstate |= (TSTATE_XCARRY | TSTATE_ICARRY);
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->tstate &= ~(TSTATE_XCARRY | TSTATE_ICARRY);
+}
+#endif
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	long val = regs->u_regs[UREG_I0];
+
+	return (syscall_has_error(regs) ? -val : 0);
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	long val = regs->u_regs[UREG_I0];
+
+	return val;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		syscall_set_error(regs);
+		regs->u_regs[UREG_I0] = -error;
+	} else {
+		syscall_clear_error(regs);
+		regs->u_regs[UREG_I0] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	int zero_extend = 0;
+	unsigned int j;
+
+#ifdef CONFIG_SPARC64
+	if (test_tsk_thread_flag(task, TIF_32BIT))
+		zero_extend = 1;
+#endif
+
+	for (j = 0; j < n; j++) {
+		unsigned long val = regs->u_regs[UREG_I0 + i + j];
+
+		if (zero_extend)
+			args[j] = (u32) val;
+		else
+			args[j] = val;
+	}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	unsigned int j;
+
+	for (j = 0; j < n; j++)
+		regs->u_regs[UREG_I0 + i + j] = args[j];
+}
+
+#endif /* __ASM_SPARC_SYSCALL_H */
diff --git a/arch/sparc/include/asm/syscalls.h b/arch/sparc/include/asm/syscalls.h
new file mode 100644
index 00000000000..45a43f637a1
--- /dev/null
+++ b/arch/sparc/include/asm/syscalls.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SYSCALLS_H
+#define _SPARC64_SYSCALLS_H
+
+struct pt_regs;
+
+extern asmlinkage long sparc_do_fork(unsigned long clone_flags,
+				     unsigned long stack_start,
+				     struct pt_regs *regs,
+				     unsigned long stack_size);
+
+extern asmlinkage int sparc_execve(struct pt_regs *regs);
+
+#endif /* _SPARC64_SYSCALLS_H */
diff --git a/arch/sparc/include/asm/sysen.h b/arch/sparc/include/asm/sysen.h
new file mode 100644
index 00000000000..6af34abde6e
--- /dev/null
+++ b/arch/sparc/include/asm/sysen.h
@@ -0,0 +1,15 @@
+/*
+ * sysen.h:  Bit fields within the "System Enable" register accessed via
+ *           the ASI_CONTROL address space at address AC_SYSENABLE.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SYSEN_H
+#define _SPARC_SYSEN_H
+
+#define SENABLE_DVMA   0x20   /* enable dvma transfers */
+#define SENABLE_CACHE  0x10   /* enable VAC cache */
+#define SENABLE_RESET  0x04   /* reset whole machine, danger Will Robinson */
+
+#endif /* _SPARC_SYSEN_H */
diff --git a/arch/sparc/include/asm/system.h b/arch/sparc/include/asm/system.h
new file mode 100644
index 00000000000..7944a7cfc99
--- /dev/null
+++ b/arch/sparc/include/asm/system.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SYSTEM_H
+#define ___ASM_SPARC_SYSTEM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/system_64.h>
+#else
+#include <asm/system_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
new file mode 100644
index 00000000000..b4b024445fc
--- /dev/null
+++ b/arch/sparc/include/asm/system_32.h
@@ -0,0 +1,288 @@
+#ifndef __SPARC_SYSTEM_H
+#define __SPARC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/threads.h>	/* NR_CPUS */
+#include <linux/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/btfixup.h>
+#include <asm/smp.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+/* Really, userland should not be looking at any of this... */
+#ifdef __KERNEL__
+
+extern enum sparc_cpu sparc_cpu_model;
+
+#ifndef CONFIG_SUN4
+#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
+#define ARCH_SUN4 0
+#else
+#define ARCH_SUN4C_SUN4 1
+#define ARCH_SUN4 1
+#endif
+
+#define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
+
+extern char reboot_command[];
+
+extern struct thread_info *current_set[NR_CPUS];
+
+extern unsigned long empty_bad_page;
+extern unsigned long empty_bad_page_table;
+extern unsigned long empty_zero_page;
+
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static inline int con_is_present(void)
+{
+	return serial_console ? 0 : 1;
+}
+
+/* When a context switch happens we must flush all user windows so that
+ * the windows of the current process are flushed onto its stack. This
+ * way the windows are all clean for the next process and the stack
+ * frames are up to date.
+ */
+extern void flush_user_windows(void);
+extern void kill_user_windows(void);
+extern void synchronize_user_stack(void);
+extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
+		   void *fpqueue, unsigned long *fpqdepth);
+
+#ifdef CONFIG_SMP
+#define SWITCH_ENTER(prv) \
+	do {			\
+	if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
+		put_psr(get_psr() | PSR_EF); \
+		fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
+		       &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
+		clear_tsk_thread_flag(prv, TIF_USEDFPU); \
+		(prv)->thread.kregs->psr &= ~PSR_EF; \
+	} \
+	} while(0)
+
+#define SWITCH_DO_LAZY_FPU(next)	/* */
+#else
+#define SWITCH_ENTER(prv)		/* */
+#define SWITCH_DO_LAZY_FPU(nxt)	\
+	do {			\
+	if (last_task_used_math != (nxt))		\
+		(nxt)->thread.kregs->psr&=~PSR_EF;	\
+	} while(0)
+#endif
+
+extern void flushw_all(void);
+
+/*
+ * Flush windows so that the VM switch which follows
+ * would not pull the stack from under us.
+ *
+ * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
+ * XXX WTF is the above comment? Found in late teen 2.4.x.
+ */
+#define prepare_arch_switch(next) do { \
+	__asm__ __volatile__( \
+	".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp\n\t" \
+	"restore; restore; restore; restore; restore; restore; restore"); \
+} while(0)
+
+	/* Much care has gone into this code, do not touch it.
+	 *
+	 * We need to loadup regs l0/l1 for the newly forked child
+	 * case because the trap return path relies on those registers
+	 * holding certain values, gcc is told that they are clobbered.
+	 * Gcc needs registers for 3 values in and 1 value out, so we
+	 * clobber every non-fixed-usage register besides l2/l3/o4/o5.  -DaveM
+	 *
+	 * Hey Dave, that do not touch sign is too much of an incentive
+	 * - Anton & Pete
+	 */
+#define switch_to(prev, next, last) do {						\
+	SWITCH_ENTER(prev);								\
+	SWITCH_DO_LAZY_FPU(next);							\
+	cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask);			\
+	__asm__ __volatile__(								\
+	"sethi	%%hi(here - 0x8), %%o7\n\t"						\
+	"mov	%%g6, %%g3\n\t"								\
+	"or	%%o7, %%lo(here - 0x8), %%o7\n\t"					\
+	"rd	%%psr, %%g4\n\t"							\
+	"std	%%sp, [%%g6 + %4]\n\t"							\
+	"rd	%%wim, %%g5\n\t"							\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"std	%%g4, [%%g6 + %3]\n\t"							\
+	"ldd	[%2 + %3], %%g4\n\t"							\
+	"mov	%2, %%g6\n\t"								\
+	".globl	patchme_store_new_current\n"						\
+"patchme_store_new_current:\n\t"							\
+	"st	%2, [%1]\n\t"								\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"nop\n\t"	/* LEON needs all 3 nops: load to %sp depends on CWP. */		\
+	"ldd	[%%g6 + %4], %%sp\n\t"							\
+	"wr	%%g5, 0x0, %%wim\n\t"							\
+	"ldd	[%%sp + 0x00], %%l0\n\t"						\
+	"ldd	[%%sp + 0x38], %%i6\n\t"						\
+	"wr	%%g4, 0x0, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"jmpl	%%o7 + 0x8, %%g0\n\t"							\
+	" ld	[%%g3 + %5], %0\n\t"							\
+	"here:\n"									\
+        : "=&r" (last)									\
+        : "r" (&(current_set[hard_smp_processor_id()])),	\
+	  "r" (task_thread_info(next)),				\
+	  "i" (TI_KPSR),					\
+	  "i" (TI_KSP),						\
+	  "i" (TI_TASK)						\
+	:       "g1", "g2", "g3", "g4", "g5",       "g7",	\
+	  "l0", "l1",       "l3", "l4", "l5", "l6", "l7",	\
+	  "i0", "i1", "i2", "i3", "i4", "i5",			\
+	  "o0", "o1", "o2", "o3",                   "o7");	\
+	} while(0)
+
+/* XXX Change this if we ever use a PSO mode kernel. */
+#define mb()	__asm__ __volatile__ ("" : : : "memory")
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+#define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+/* This has special calling conventions */
+#ifndef CONFIG_SMP
+BTFIXUPDEF_CALL(void, ___xchg32, void)
+#endif
+
+static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
+{
+#ifdef CONFIG_SMP
+	__asm__ __volatile__("swap [%2], %0"
+			     : "=&r" (val)
+			     : "0" (val), "r" (m)
+			     : "memory");
+	return val;
+#else
+	register unsigned long *ptr asm("g1");
+	register unsigned long ret asm("g2");
+
+	ptr = (unsigned long *) m;
+	ret = val;
+
+	/* Note: this is magic and the nop there is
+	   really needed. */
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___f____xchg32\n\t"
+	" nop\n\t"
+	: "=&r" (ret)
+	: "0" (ret), "r" (ptr)
+	: "g3", "g4", "g7", "memory", "cc");
+
+	return ret;
+#endif
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return xchg_u32(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+/* Emulate cmpxchg() the same way we emulate atomics,
+ * by hashing the object address and indexing into an array
+ * of spinlocks to get a bit of performance...
+ *
+ * See arch/sparc/lib/atomic32.c for implementation.
+ *
+ * Cribbed from <asm-parisc/atomic.h>
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+/* bug catcher for when unsupported size is used - won't link */
+extern void __cmpxchg_called_with_bad_pointer(void);
+/* we only need to support cmpxchg of a u32 on sparc */
+extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_);
+
+/* don't worry...optimizer will get rid of most of this */
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_);
+	default:
+		__cmpxchg_called_with_bad_pointer();
+		break;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
+			(unsigned long)_n_, sizeof(*(ptr)));		\
+})
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC_SYSTEM_H) */
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
new file mode 100644
index 00000000000..db9e742a406
--- /dev/null
+++ b/arch/sparc/include/asm/system_64.h
@@ -0,0 +1,355 @@
+#ifndef __SPARC64_SYSTEM_H
+#define __SPARC64_SYSTEM_H
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/visasm.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+#define sparc_cpu_model sun4u
+
+/* This cannot ever be a sun4c nor sun4 :) That's just history. */
+#define ARCH_SUN4C_SUN4 0
+#define ARCH_SUN4 0
+
+extern char reboot_command[];
+
+/* These are here in an effort to more fully work around Spitfire Errata
+ * #51.  Essentially, if a memory barrier occurs soon after a mispredicted
+ * branch, the chip can stop executing instructions until a trap occurs.
+ * Therefore, if interrupts are disabled, the chip can hang forever.
+ *
+ * It used to be believed that the memory barrier had to be right in the
+ * delay slot, but a case has been traced recently wherein the memory barrier
+ * was one instruction after the branch delay slot and the chip still hung.
+ * The offending sequence was the following in sym_wakeup_done() of the
+ * sym53c8xx_2 driver:
+ *
+ *	call	sym_ccb_from_dsa, 0
+ *	 movge	%icc, 0, %l0
+ *	brz,pn	%o0, .LL1303
+ *	 mov	%o0, %l2
+ *	membar	#LoadLoad
+ *
+ * The branch has to be mispredicted for the bug to occur.  Therefore, we put
+ * the memory barrier explicitly into a "branch always, predicted taken"
+ * delay slot to avoid the problem case.
+ */
+#define membar_safe(type) \
+do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
+			     " membar	" type "\n" \
+			     "1:\n" \
+			     : : : "memory"); \
+} while (0)
+
+#define mb()	\
+	membar_safe("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
+#define rmb()	\
+	membar_safe("#LoadLoad")
+#define wmb()	\
+	membar_safe("#StoreStore")
+#define membar_storeload() \
+	membar_safe("#StoreLoad")
+#define membar_storeload_storestore() \
+	membar_safe("#StoreLoad | #StoreStore")
+#define membar_storeload_loadload() \
+	membar_safe("#StoreLoad | #LoadLoad")
+#define membar_storestore_loadstore() \
+	membar_safe("#StoreStore | #LoadStore")
+
+#endif
+
+#define nop() 		__asm__ __volatile__ ("nop")
+
+#define read_barrier_depends()		do { } while(0)
+#define set_mb(__var, __value) \
+	do { __var = __value; membar_storeload_storestore(); } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define flushi(addr)	__asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
+
+#define flushw_all()	__asm__ __volatile__("flushw")
+
+/* Performance counter register access. */
+#define read_pcr(__p)  __asm__ __volatile__("rd	%%pcr, %0" : "=r" (__p))
+#define write_pcr(__p) __asm__ __volatile__("wr	%0, 0x0, %%pcr" : : "r" (__p))
+#define read_pic(__p)  __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
+
+/* Blackbird errata workaround.  See commentary in
+ * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
+ * for more information.
+ */
+#define reset_pic()    						\
+	__asm__ __volatile__("ba,pt	%xcc, 99f\n\t"		\
+			     ".align	64\n"			\
+			  "99:wr	%g0, 0x0, %pic\n\t"	\
+			     "rd	%pic, %g0")
+
+#ifndef __ASSEMBLY__
+
+extern void sun_do_break(void);
+extern int stop_a_enabled;
+
+extern void fault_in_user_windows(void);
+extern void synchronize_user_stack(void);
+
+extern void __flushw_user(void);
+#define flushw_user() __flushw_user()
+
+#define flush_user_windows flushw_user
+#define flush_register_windows flushw_all
+
+/* Don't hold the runqueue lock over context switch */
+#define __ARCH_WANT_UNLOCKED_CTXSW
+#define prepare_arch_switch(next)		\
+do {						\
+	flushw_all();				\
+} while (0)
+
+	/* See what happens when you design the chip correctly?
+	 *
+	 * We tell gcc we clobber all non-fixed-usage registers except
+	 * for l0/l1.  It will use one for 'next' and the other to hold
+	 * the output value of 'last'.  'next' is not referenced again
+	 * past the invocation of switch_to in the scheduler, so we need
+	 * not preserve it's value.  Hairy, but it lets us remove 2 loads
+	 * and 2 stores in this critical code path.  -DaveM
+	 */
+#define switch_to(prev, next, last)					\
+do {	if (test_thread_flag(TIF_PERFCTR)) {				\
+		unsigned long __tmp;					\
+		read_pcr(__tmp);					\
+		current_thread_info()->pcr_reg = __tmp;			\
+		read_pic(__tmp);					\
+		current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
+		current_thread_info()->kernel_cntd1 += ((__tmp) >> 32);	\
+	}								\
+	flush_tlb_pending();						\
+	save_and_clear_fpu();						\
+	/* If you are tempted to conditionalize the following */	\
+	/* so that ASI is only written if it changes, think again. */	\
+	__asm__ __volatile__("wr %%g0, %0, %%asi"			\
+	: : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\
+	trap_block[current_thread_info()->cpu].thread =			\
+		task_thread_info(next);					\
+	__asm__ __volatile__(						\
+	"mov	%%g4, %%g7\n\t"						\
+	"stx	%%i6, [%%sp + 2047 + 0x70]\n\t"				\
+	"stx	%%i7, [%%sp + 2047 + 0x78]\n\t"				\
+	"rdpr	%%wstate, %%o5\n\t"					\
+	"stx	%%o6, [%%g6 + %6]\n\t"					\
+	"stb	%%o5, [%%g6 + %5]\n\t"					\
+	"rdpr	%%cwp, %%o5\n\t"					\
+	"stb	%%o5, [%%g6 + %8]\n\t"					\
+	"mov	%4, %%g6\n\t"						\
+	"ldub	[%4 + %8], %%g1\n\t"					\
+	"wrpr	%%g1, %%cwp\n\t"					\
+	"ldx	[%%g6 + %6], %%o6\n\t"					\
+	"ldub	[%%g6 + %5], %%o5\n\t"					\
+	"ldub	[%%g6 + %7], %%o7\n\t"					\
+	"wrpr	%%o5, 0x0, %%wstate\n\t"				\
+	"ldx	[%%sp + 2047 + 0x70], %%i6\n\t"				\
+	"ldx	[%%sp + 2047 + 0x78], %%i7\n\t"				\
+	"ldx	[%%g6 + %9], %%g4\n\t"					\
+	"brz,pt %%o7, switch_to_pc\n\t"					\
+	" mov	%%g7, %0\n\t"						\
+	"sethi	%%hi(ret_from_syscall), %%g1\n\t"			\
+	"jmpl	%%g1 + %%lo(ret_from_syscall), %%g0\n\t"		\
+	" nop\n\t"							\
+	".globl switch_to_pc\n\t"					\
+	"switch_to_pc:\n\t"						\
+	: "=&r" (last), "=r" (current), "=r" (current_thread_info_reg),	\
+	  "=r" (__local_per_cpu_offset)					\
+	: "0" (task_thread_info(next)),					\
+	  "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD),            \
+	  "i" (TI_CWP), "i" (TI_TASK)					\
+	: "cc",								\
+	        "g1", "g2", "g3",                   "g7",		\
+	        "l1", "l2", "l3", "l4", "l5", "l6", "l7",		\
+	  "i0", "i1", "i2", "i3", "i4", "i5",				\
+	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7");		\
+	/* If you fuck with this, update ret_from_syscall code too. */	\
+	if (test_thread_flag(TIF_PERFCTR)) {				\
+		write_pcr(current_thread_info()->pcr_reg);		\
+		reset_pic();						\
+	}								\
+} while(0)
+
+static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
+"	mov		%0, %1\n"
+"1:	lduw		[%4], %2\n"
+"	cas		[%4], %2, %0\n"
+"	cmp		%2, %0\n"
+"	bne,a,pn	%%icc, 1b\n"
+"	 mov		%1, %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+	: "0" (val), "r" (m)
+	: "cc", "memory");
+	return val;
+}
+
+static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
+"	mov		%0, %1\n"
+"1:	ldx		[%4], %2\n"
+"	casx		[%4], %2, %0\n"
+"	cmp		%2, %0\n"
+"	bne,a,pn	%%xcc, 1b\n"
+"	 mov		%1, %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+	: "0" (val), "r" (m)
+	: "cc", "memory");
+	return val;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
+				       int size)
+{
+	switch (size) {
+	case 4:
+		return xchg32(ptr, x);
+	case 8:
+		return xchg64(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "cas [%2], %3, %0\n\t"
+			     "membar #StoreLoad | #StoreStore"
+			     : "=&r" (new)
+			     : "0" (new), "r" (m), "r" (old)
+			     : "memory");
+
+	return new;
+}
+
+static inline unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "casx [%2], %3, %0\n\t"
+			     "membar #StoreLoad | #StoreStore"
+			     : "=&r" (new)
+			     : "0" (new), "r" (m), "r" (old)
+			     : "memory");
+
+	return new;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+		case 4:
+			return __cmpxchg_u32(ptr, old, new);
+		case 8:
+			return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+	case 8:	return __cmpxchg(ptr, old, new, size);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+#define cmpxchg_local(ptr, o, n)				  	\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+
+#endif /* !(__ASSEMBLY__) */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC64_SYSTEM_H) */
diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h
new file mode 100644
index 00000000000..d6ca3e2754f
--- /dev/null
+++ b/arch/sparc/include/asm/termbits.h
@@ -0,0 +1,266 @@
+#ifndef _SPARC_TERMBITS_H
+#define _SPARC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+
+#if defined(__sparc__) && defined(__arch64__)
+typedef unsigned int    tcflag_t;
+#else
+typedef unsigned long   tcflag_t;
+#endif
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#define NCCS 17
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+#ifdef __KERNEL__
+#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
+	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+#endif
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t _x_cc[2];                  /* padding to match ktermios */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR    0
+#define VQUIT    1
+#define VERASE   2
+#define VKILL    3
+#define VEOF     4
+#define VEOL     5
+#define VEOL2    6
+#define VSWTC    7
+#define VSTART   8
+#define VSTOP    9
+
+
+
+#define VSUSP    10
+#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE  14
+#define VLNEXT   15
+
+/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
+ * shared with eof/eol
+ */
+#ifdef __KERNEL__
+#define VMIN     16
+#define VTIME    17
+#else
+#define VMIN     VEOF
+#define VTIME    VEOL
+#endif
+
+/* c_iflag bits */
+#define IGNBRK	0x00000001
+#define BRKINT	0x00000002
+#define IGNPAR	0x00000004
+#define PARMRK	0x00000008
+#define INPCK	0x00000010
+#define ISTRIP	0x00000020
+#define INLCR	0x00000040
+#define IGNCR	0x00000080
+#define ICRNL	0x00000100
+#define IUCLC	0x00000200
+#define IXON	0x00000400
+#define IXANY	0x00000800
+#define IXOFF	0x00001000
+#define IMAXBEL	0x00002000
+#define IUTF8   0x00004000
+
+/* c_oflag bits */
+#define OPOST	0x00000001
+#define OLCUC	0x00000002
+#define ONLCR	0x00000004
+#define OCRNL	0x00000008
+#define ONOCR	0x00000010
+#define ONLRET	0x00000020
+#define OFILL	0x00000040
+#define OFDEL	0x00000080
+#define NLDLY	0x00000100
+#define   NL0	0x00000000
+#define   NL1	0x00000100
+#define CRDLY	0x00000600
+#define   CR0	0x00000000
+#define   CR1	0x00000200
+#define   CR2	0x00000400
+#define   CR3	0x00000600
+#define TABDLY	0x00001800
+#define   TAB0	0x00000000
+#define   TAB1	0x00000800
+#define   TAB2	0x00001000
+#define   TAB3	0x00001800
+#define   XTABS	0x00001800
+#define BSDLY	0x00002000
+#define   BS0	0x00000000
+#define   BS1	0x00002000
+#define VTDLY	0x00004000
+#define   VT0	0x00000000
+#define   VT1	0x00004000
+#define FFDLY	0x00008000
+#define   FF0	0x00000000
+#define   FF1	0x00008000
+#define PAGEOUT 0x00010000  /* SUNOS specific */
+#define WRAP    0x00020000  /* SUNOS specific */
+
+/* c_cflag bit meaning */
+#define CBAUD	  0x0000100f
+#define  B0	  0x00000000   /* hang up */
+#define  B50	  0x00000001
+#define  B75	  0x00000002
+#define  B110	  0x00000003
+#define  B134	  0x00000004
+#define  B150	  0x00000005
+#define  B200	  0x00000006
+#define  B300	  0x00000007
+#define  B600	  0x00000008
+#define  B1200	  0x00000009
+#define  B1800	  0x0000000a
+#define  B2400	  0x0000000b
+#define  B4800	  0x0000000c
+#define  B9600	  0x0000000d
+#define  B19200	  0x0000000e
+#define  B38400	  0x0000000f
+#define EXTA      B19200
+#define EXTB      B38400
+#define  CSIZE    0x00000030
+#define   CS5	  0x00000000
+#define   CS6	  0x00000010
+#define   CS7	  0x00000020
+#define   CS8	  0x00000030
+#define CSTOPB	  0x00000040
+#define CREAD	  0x00000080
+#define PARENB	  0x00000100
+#define PARODD	  0x00000200
+#define HUPCL	  0x00000400
+#define CLOCAL	  0x00000800
+#define CBAUDEX   0x00001000
+/* We'll never see these speeds with the Zilogs, but for completeness... */
+#define  BOTHER   0x00001000
+#define  B57600   0x00001001
+#define  B115200  0x00001002
+#define  B230400  0x00001003
+#define  B460800  0x00001004
+/* This is what we can do with the Zilogs. */
+#define  B76800   0x00001005
+/* This is what we can do with the SAB82532. */
+#define  B153600  0x00001006
+#define  B307200  0x00001007
+#define  B614400  0x00001008
+#define  B921600  0x00001009
+/* And these are the rest... */
+#define  B500000  0x0000100a
+#define  B576000  0x0000100b
+#define B1000000  0x0000100c
+#define B1152000  0x0000100d
+#define B1500000  0x0000100e
+#define B2000000  0x0000100f
+/* These have totally bogus values and nobody uses them
+   so far. Later on we'd have to use say 0x10000x and
+   adjust CBAUD constant and drivers accordingly.
+#define B2500000  0x00001010
+#define B3000000  0x00001011
+#define B3500000  0x00001012
+#define B4000000  0x00001013  */
+#define CIBAUD	  0x100f0000  /* input baud rate (not used) */
+#define CMSPAR	  0x40000000  /* mark or space (stick) parity */
+#define CRTSCTS	  0x80000000  /* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0x00000001
+#define ICANON	0x00000002
+#define XCASE	0x00000004
+#define ECHO	0x00000008
+#define ECHOE	0x00000010
+#define ECHOK	0x00000020
+#define ECHONL	0x00000040
+#define NOFLSH	0x00000080
+#define TOSTOP	0x00000100
+#define ECHOCTL	0x00000200
+#define ECHOPRT	0x00000400
+#define ECHOKE	0x00000800
+#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
+#define FLUSHO	0x00002000
+#define PENDIN	0x00004000
+#define IEXTEN	0x00008000
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* !(_SPARC_TERMBITS_H) */
diff --git a/arch/sparc/include/asm/termios.h b/arch/sparc/include/asm/termios.h
new file mode 100644
index 00000000000..e8ba9539964
--- /dev/null
+++ b/arch/sparc/include/asm/termios.h
@@ -0,0 +1,186 @@
+#ifndef _SPARC_TERMIOS_H
+#define _SPARC_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+#endif /* __KERNEL__ */
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ * c_cc characters in the termio structure.  Oh, how I love being
+ * backwardly compatible.  Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VMIN	4
+#define _VTIME	5
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		eol=\0		eol2=\0		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		dsusp=^Y
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	vmin=\1         vtime=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	int err; \
+	err = get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	err |= copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+	err; \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	int err; \
+	err  = put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	err |= put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	err |= put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	err |= put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	err |= put_user((termios)->c_line,  &(termio)->c_line); \
+	err |= copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+	if (!((termios)->c_lflag & ICANON)) { \
+		err |= put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
+		err |= put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
+	} \
+	err; \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+({ \
+	int err; \
+	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= get_user((k)->c_line,  &(u)->c_line); \
+	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+	if ((k)->c_lflag & ICANON) { \
+		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} else { \
+		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} \
+	err |= get_user((k)->c_ispeed,  &(u)->c_ispeed); \
+	err |= get_user((k)->c_ospeed,  &(u)->c_ospeed); \
+	err; \
+})
+
+#define kernel_termios_to_user_termios(u, k) \
+({ \
+	int err; \
+	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= put_user((k)->c_line, &(u)->c_line); \
+	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+	if (!((k)->c_lflag & ICANON)) { \
+		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} else { \
+		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} \
+	err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \
+	err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \
+	err; \
+})
+
+#define user_termios_to_kernel_termios_1(k, u) \
+({ \
+	int err; \
+	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= get_user((k)->c_line,  &(u)->c_line); \
+	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+	if ((k)->c_lflag & ICANON) { \
+		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} else { \
+		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} \
+	err; \
+})
+
+#define kernel_termios_to_user_termios_1(u, k) \
+({ \
+	int err; \
+	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= put_user((k)->c_line, &(u)->c_line); \
+	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+	if (!((k)->c_lflag & ICANON)) { \
+		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} else { \
+		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} \
+	err; \
+})
+
+#endif	/* __KERNEL__ */
+
+#endif /* _SPARC_TERMIOS_H */
diff --git a/arch/sparc/include/asm/thread_info.h b/arch/sparc/include/asm/thread_info.h
new file mode 100644
index 00000000000..122d7acc07e
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_THREAD_INFO_H
+#define ___ASM_SPARC_THREAD_INFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/thread_info_64.h>
+#else
+#include <asm/thread_info_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
new file mode 100644
index 00000000000..cbb892d0dff
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -0,0 +1,158 @@
+/*
+ * thread_info.h: sparc low-level thread information
+ * adapted from the ppc version by Pete Zaitcev, which was
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * Copyright (c) 2002  Pete Zaitcev (zaitcev@yahoo.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/btfixup.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Low level task data.
+ *
+ * If you change this, change the TI_* offsets below to match.
+ */
+#define NSWINS 8
+struct thread_info {
+	unsigned long		uwinmask;
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	int			cpu;		/* cpu we're on */
+	int			preempt_count;	/* 0 => preemptable,
+						   <0 => BUG */
+	int			softirq_count;
+	int			hardirq_count;
+
+	/* Context switch saved kernel state. */
+	unsigned long ksp;	/* ... ksp __attribute__ ((aligned (8))); */
+	unsigned long kpc;
+	unsigned long kpsr;
+	unsigned long kwim;
+
+	/* A place to store user windows and stack pointers
+	 * when the stack needs inspection.
+	 */
+	struct reg_window	reg_window[NSWINS];	/* align for ldd! */
+	unsigned long		rwbuf_stkptrs[NSWINS];
+	unsigned long		w_saved;
+
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.uwinmask	=	0,			\
+	.task		=	&tsk,			\
+	.exec_domain	=	&default_exec_domain,	\
+	.flags		=	0,			\
+	.cpu		=	0,			\
+	.preempt_count	=	1,			\
+	.restart_block	= {				\
+		.fn	=	do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()   (current_thread_info_reg)
+
+/*
+ * thread information allocation
+ */
+#if PAGE_SHIFT == 13
+#define THREAD_INFO_ORDER  0
+#else /* PAGE_SHIFT */
+#define THREAD_INFO_ORDER  1
+#endif
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
+#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
+
+BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
+#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ * Observe the order of get_free_pages() in alloc_thread_info().
+ * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
+ */
+#define THREAD_SIZE		8192
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
+ */
+#define TI_UWINMASK	0x00	/* uwinmask */
+#define TI_TASK		0x04
+#define TI_EXECDOMAIN	0x08	/* exec_domain */
+#define TI_FLAGS	0x0c
+#define TI_CPU		0x10
+#define TI_PREEMPT	0x14	/* preempt_count */
+#define TI_SOFTIRQ	0x18	/* softirq_count */
+#define TI_HARDIRQ	0x1c	/* hardirq_count */
+#define TI_KSP		0x20	/* ksp */
+#define TI_KPC		0x24	/* kpc (ldd'ed with kpc) */
+#define TI_KPSR		0x28	/* kpsr */
+#define TI_KWIM		0x2c	/* kwim (ldd'ed with kpsr) */
+#define TI_REG_WINDOW	0x30
+#define TI_RWIN_SPTRS	0x230
+#define TI_W_SAVED	0x250
+/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK	4	/* restore signal mask in do_signal() */
+#define TIF_USEDFPU		8	/* FPU was used by this task
+					 * this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling
+					 * TIF_NEED_RESCHED */
+#define TIF_MEMDIE		10
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | \
+					 _TIF_SIGPENDING | \
+					 _TIF_RESTORE_SIGMASK)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
new file mode 100644
index 00000000000..c0a737d7292
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -0,0 +1,281 @@
+/* thread_info.h: sparc64 low-level thread information
+ *
+ * Copyright (C) 2002  David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#define NSWINS		7
+
+#define TI_FLAG_BYTE_FAULT_CODE		0
+#define TI_FLAG_FAULT_CODE_SHIFT	56
+#define TI_FLAG_BYTE_WSTATE		1
+#define TI_FLAG_WSTATE_SHIFT		48
+#define TI_FLAG_BYTE_CWP		2
+#define TI_FLAG_CWP_SHIFT		40
+#define TI_FLAG_BYTE_CURRENT_DS		3
+#define TI_FLAG_CURRENT_DS_SHIFT	32
+#define TI_FLAG_BYTE_FPDEPTH		4
+#define TI_FLAG_FPDEPTH_SHIFT		24
+#define TI_FLAG_BYTE_WSAVED		5
+#define TI_FLAG_WSAVED_SHIFT		16
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+	/* D$ line 1 */
+	struct task_struct	*task;
+	unsigned long		flags;
+	__u8			fpsaved[7];
+	__u8			status;
+	unsigned long		ksp;
+
+	/* D$ line 2 */
+	unsigned long		fault_address;
+	struct pt_regs		*kregs;
+	struct exec_domain	*exec_domain;
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	__u8			new_child;
+	__u8			syscall_noerror;
+	__u16			cpu;
+
+	unsigned long		*utraps;
+
+	struct reg_window 	reg_window[NSWINS];
+	unsigned long 		rwbuf_stkptrs[NSWINS];
+
+	unsigned long		gsr[7];
+	unsigned long		xfsr[7];
+
+	__u64			__user *user_cntd0;
+	__u64			__user *user_cntd1;
+	__u64			kernel_cntd0, kernel_cntd1;
+	__u64			pcr_reg;
+
+	struct restart_block	restart_block;
+
+	struct pt_regs		*kern_una_regs;
+	unsigned int		kern_una_insn;
+
+	unsigned long		fpregs[0] __attribute__ ((aligned(64)));
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK		0x00000000
+#define TI_FLAGS	0x00000008
+#define TI_FAULT_CODE	(TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
+#define TI_WSTATE	(TI_FLAGS + TI_FLAG_BYTE_WSTATE)
+#define TI_CWP		(TI_FLAGS + TI_FLAG_BYTE_CWP)
+#define TI_CURRENT_DS	(TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
+#define TI_FPDEPTH	(TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
+#define TI_WSAVED	(TI_FLAGS + TI_FLAG_BYTE_WSAVED)
+#define TI_FPSAVED	0x00000010
+#define TI_KSP		0x00000018
+#define TI_FAULT_ADDR	0x00000020
+#define TI_KREGS	0x00000028
+#define TI_EXEC_DOMAIN	0x00000030
+#define TI_PRE_COUNT	0x00000038
+#define TI_NEW_CHILD	0x0000003c
+#define TI_SYS_NOERROR	0x0000003d
+#define TI_CPU		0x0000003e
+#define TI_UTRAPS	0x00000040
+#define TI_REG_WINDOW	0x00000048
+#define TI_RWIN_SPTRS	0x000003c8
+#define TI_GSR		0x00000400
+#define TI_XFSR		0x00000438
+#define TI_USER_CNTD0	0x00000470
+#define TI_USER_CNTD1	0x00000478
+#define TI_KERN_CNTD0	0x00000480
+#define TI_KERN_CNTD1	0x00000488
+#define TI_PCR		0x00000490
+#define TI_RESTART_BLOCK 0x00000498
+#define TI_KUNA_REGS	0x000004c0
+#define TI_KUNA_INSN	0x000004c8
+#define TI_FPREGS	0x00000500
+
+/* We embed this in the uppermost byte of thread_info->flags */
+#define FAULT_CODE_WRITE	0x01	/* Write access, implies D-TLB	   */
+#define FAULT_CODE_DTLB		0x02	/* Miss happened in D-TLB	   */
+#define FAULT_CODE_ITLB		0x04	/* Miss happened in I-TLB	   */
+#define FAULT_CODE_WINFIXUP	0x08	/* Miss happened during spill/fill */
+#define FAULT_CODE_BLKCOMMIT	0x10	/* Use blk-commit ASI in copy_page */
+
+#if PAGE_SHIFT == 13
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define THREAD_SHIFT (PAGE_SHIFT + 1)
+#else /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE PAGE_SIZE
+#define THREAD_SHIFT PAGE_SHIFT
+#endif /* PAGE_SHIFT == 13 */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.task		=	&tsk,			\
+	.flags		= ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,	\
+	.exec_domain	=	&default_exec_domain,	\
+	.preempt_count	=	1,			\
+	.restart_block	= {				\
+		.fn	=	do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()	(current_thread_info_reg)
+
+/* thread information allocation */
+#if PAGE_SHIFT == 13
+#define __THREAD_INFO_ORDER	1
+#else /* PAGE_SHIFT == 13 */
+#define __THREAD_INFO_ORDER	0
+#endif /* PAGE_SHIFT == 13 */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+({								\
+	struct thread_info *ret;				\
+								\
+	ret = (struct thread_info *)				\
+	  __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER);	\
+	if (ret)						\
+		memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER);	\
+	ret;							\
+})
+#else
+#define alloc_thread_info(tsk) \
+	((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER))
+#endif
+
+#define free_thread_info(ti) \
+	free_pages((unsigned long)(ti),__THREAD_INFO_ORDER)
+
+#define __thread_flag_byte_ptr(ti)	\
+	((unsigned char *)(&((ti)->flags)))
+#define __cur_thread_flag_byte_ptr	__thread_flag_byte_ptr(current_thread_info())
+
+#define get_thread_fault_code()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE])
+#define set_thread_fault_code(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val))
+#define get_thread_wstate()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE])
+#define set_thread_wstate(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val))
+#define get_thread_cwp()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP])
+#define set_thread_cwp(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val))
+#define get_thread_current_ds()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS])
+#define set_thread_current_ds(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val))
+#define get_thread_fpdepth()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH])
+#define set_thread_fpdepth(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val))
+#define get_thread_wsaved()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED])
+#define set_thread_wsaved(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val))
+
+#endif /* !(__ASSEMBLY__) */
+
+/*
+ * Thread information flags, only 16 bits are available as we encode
+ * other values into the upper 6 bytes.
+ *
+ * On trap return we need to test several values:
+ *
+ * user:	need_resched, notify_resume, sigpending, wsaved, perfctr
+ * kernel:	fpdepth
+ *
+ * So to check for work in the kernel case we simply load the fpdepth
+ * byte out of the flags and test it.  For the user case we encode the
+ * lower 3 bytes of flags as follows:
+ *	----------------------------------------
+ *	| wsaved | flags byte 1 | flags byte 2 |
+ *	----------------------------------------
+ * This optimizes the user test into:
+ *	ldx		[%g6 + TI_FLAGS], REG1
+ *	sethi		%hi(_TIF_USER_WORK_MASK), REG2
+ *	or		REG2, %lo(_TIF_USER_WORK_MASK), REG2
+ *	andcc		REG1, REG2, %g0
+ *	be,pt		no_work_to_do
+ *	 nop
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_PERFCTR		4	/* performance counters active */
+#define TIF_UNALIGNED		5	/* allowed to do unaligned accesses */
+/* flag bit 6 is available */
+#define TIF_32BIT		7	/* 32-bit binary */
+/* flag bit 8 is available */
+#define TIF_SECCOMP		9	/* secure computing */
+#define TIF_SYSCALL_AUDIT	10	/* syscall auditing active */
+/* flag bit 11 is available */
+/* NOTE: Thread flags >= 12 should be ones we have no interest
+ *       in using in assembly, else we can't use the mask as
+ *       an immediate value in instructions such as andcc.
+ */
+#define TIF_ABI_PENDING		12
+#define TIF_MEMDIE		13
+#define TIF_POLLING_NRFLAG	14
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_PERFCTR		(1<<TIF_PERFCTR)
+#define _TIF_UNALIGNED		(1<<TIF_UNALIGNED)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
+				 _TIF_DO_NOTIFY_RESUME_MASK | \
+				 _TIF_NEED_RESCHED | _TIF_PERFCTR)
+#define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING)
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ *
+ * Note that there are only 8 bits available.
+ */
+#define TS_RESTORE_SIGMASK	0x0001	/* restore signal mask in do_signal() */
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/timer.h b/arch/sparc/include/asm/timer.h
new file mode 100644
index 00000000000..612fd2779d9
--- /dev/null
+++ b/arch/sparc/include/asm/timer.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMER_H
+#define ___ASM_SPARC_TIMER_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timer_64.h>
+#else
+#include <asm/timer_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h
new file mode 100644
index 00000000000..361e53898dd
--- /dev/null
+++ b/arch/sparc/include/asm/timer_32.h
@@ -0,0 +1,107 @@
+/*
+ * timer.h:  Definitions for the timer chips on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+
+#ifndef _SPARC_TIMER_H
+#define _SPARC_TIMER_H
+
+#include <asm/system.h>  /* For SUN4M_NCPUS */
+#include <asm/sun4paddr.h>
+#include <asm/btfixup.h>
+
+/* Timer structures. The interrupt timer has two properties which
+ * are the counter (which is handled in do_timer in sched.c) and the limit.
+ * This limit is where the timer's counter 'wraps' around. Oddly enough,
+ * the sun4c timer when it hits the limit wraps back to 1 and not zero
+ * thus when calculating the value at which it will fire a microsecond you
+ * must adjust by one.  Thanks SUN for designing such great hardware ;(
+ */
+
+/* Note that I am only going to use the timer that interrupts at
+ * Sparc IRQ 10.  There is another one available that can fire at
+ * IRQ 14. Currently it is left untouched, we keep the PROM's limit
+ * register value and let the prom take these interrupts.  This allows
+ * L1-A to work.
+ */
+
+struct sun4c_timer_info {
+  __volatile__ unsigned int cur_count10;
+  __volatile__ unsigned int timer_limit10;
+  __volatile__ unsigned int cur_count14;
+  __volatile__ unsigned int timer_limit14;
+};
+
+#define SUN4C_TIMER_PHYSADDR   0xf3000000
+#ifdef CONFIG_SUN4
+#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
+#else
+#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
+#endif
+
+/* A sun4m has two blocks of registers which are probably of the same
+ * structure. LSI Logic's L64851 is told to _decrement_ from the limit
+ * value. Aurora behaves similarly but its limit value is compacted in
+ * other fashion (it's wider). Documented fields are defined here.
+ */
+
+/* As with the interrupt register, we have two classes of timer registers
+ * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
+ * only level 14 ticks, master timer hits all cpus and is level 10.
+ */
+
+#define SUN4M_PRM_CNT_L       0x80000000
+#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4m_timer_percpu_info {
+  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
+  __volatile__ unsigned int l14_cur_count;
+
+  /* This register appears to be write only and/or inaccessible
+   * on Uni-Processor sun4m machines.
+   */
+  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
+
+  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
+  __volatile__ unsigned char space[PAGE_SIZE - 16];
+};
+
+struct sun4m_timer_regs {
+	struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
+	volatile unsigned int l10_timer_limit;
+	volatile unsigned int l10_cur_count;
+
+	/* Again, this appears to be write only and/or inaccessible
+	 * on uni-processor sun4m machines.
+	 */
+	volatile unsigned int l10_limit_noclear;
+
+	/* This register too, it must be magic. */
+	volatile unsigned int foobar;
+
+	volatile unsigned int cfg;     /* equals zero at boot time... */
+};
+
+#define SUN4D_PRM_CNT_L       0x80000000
+#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4d_timer_regs {
+	volatile unsigned int l10_timer_limit;
+	volatile unsigned int l10_cur_countx;
+	volatile unsigned int l10_limit_noclear;
+	volatile unsigned int ctrl;
+	volatile unsigned int l10_cur_count;
+};
+
+extern struct sun4d_timer_regs *sun4d_timers;
+
+extern __volatile__ unsigned int *master_l10_counter;
+extern __volatile__ unsigned int *master_l10_limit;
+
+/* FIXME: Make do_[gs]ettimeofday btfixup calls */
+BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
+#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
+
+#endif /* !(_SPARC_TIMER_H) */
diff --git a/arch/sparc/include/asm/timer_64.h b/arch/sparc/include/asm/timer_64.h
new file mode 100644
index 00000000000..5b779fd1f78
--- /dev/null
+++ b/arch/sparc/include/asm/timer_64.h
@@ -0,0 +1,30 @@
+/* timer.h: System timer definitions for sun5.
+ *
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_TIMER_H
+#define _SPARC64_TIMER_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+struct sparc64_tick_ops {
+	unsigned long (*get_tick)(void);
+	int (*add_compare)(unsigned long);
+	unsigned long softint_mask;
+	void (*disable_irq)(void);
+
+	void (*init_tick)(void);
+	unsigned long (*add_tick)(unsigned long);
+
+	char *name;
+};
+
+extern struct sparc64_tick_ops *tick_ops;
+
+extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
+extern void __devinit setup_sparc64_timer(void);
+extern void __init time_init(void);
+
+#endif /* _SPARC64_TIMER_H */
diff --git a/arch/sparc/include/asm/timex.h b/arch/sparc/include/asm/timex.h
new file mode 100644
index 00000000000..70cc37b7382
--- /dev/null
+++ b/arch/sparc/include/asm/timex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMEX_H
+#define ___ASM_SPARC_TIMEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timex_64.h>
+#else
+#include <asm/timex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h
new file mode 100644
index 00000000000..b6ccdb0d6f7
--- /dev/null
+++ b/arch/sparc/include/asm/timex_32.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc architecture timex specifications
+ */
+#ifndef _ASMsparc_TIMEX_H
+#define _ASMsparc_TIMEX_H
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+/* XXX Maybe do something better at some point... -DaveM */
+typedef unsigned long cycles_t;
+#define get_cycles()	(0)
+
+#endif
diff --git a/arch/sparc/include/asm/timex_64.h b/arch/sparc/include/asm/timex_64.h
new file mode 100644
index 00000000000..18b30bc9823
--- /dev/null
+++ b/arch/sparc/include/asm/timex_64.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc64 architecture timex specifications
+ */
+#ifndef _ASMsparc64_TIMEX_H
+#define _ASMsparc64_TIMEX_H
+
+#include <asm/timer.h>
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+/* Getting on the cycle counter on sparc64. */
+typedef unsigned long cycles_t;
+#define get_cycles()	tick_ops->get_tick()
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif
diff --git a/arch/sparc/include/asm/tlb.h b/arch/sparc/include/asm/tlb.h
new file mode 100644
index 00000000000..92d0393bbcd
--- /dev/null
+++ b/arch/sparc/include/asm/tlb.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLB_H
+#define ___ASM_SPARC_TLB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlb_64.h>
+#else
+#include <asm/tlb_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/tlb_32.h b/arch/sparc/include/asm/tlb_32.h
new file mode 100644
index 00000000000..6d02d1ce53f
--- /dev/null
+++ b/arch/sparc/include/asm/tlb_32.h
@@ -0,0 +1,24 @@
+#ifndef _SPARC_TLB_H
+#define _SPARC_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+do {								\
+	flush_cache_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define tlb_end_vma(tlb, vma) \
+do {								\
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) \
+	do { } while (0)
+
+#define tlb_flush(tlb) \
+do {								\
+	flush_tlb_mm((tlb)->mm);				\
+} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _SPARC_TLB_H */
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
new file mode 100644
index 00000000000..ec81cdedef2
--- /dev/null
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -0,0 +1,111 @@
+#ifndef _SPARC64_TLB_H
+#define _SPARC64_TLB_H
+
+#include <linux/swap.h>
+#include <linux/pagemap.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+#define TLB_BATCH_NR	192
+
+/*
+ * For UP we don't need to worry about TLB flush
+ * and page free order so much..
+ */
+#ifdef CONFIG_SMP
+  #define FREE_PTE_NR	506
+  #define tlb_fast_mode(bp) ((bp)->pages_nr == ~0U)
+#else
+  #define FREE_PTE_NR	1
+  #define tlb_fast_mode(bp) 1
+#endif
+
+struct mmu_gather {
+	struct mm_struct *mm;
+	unsigned int pages_nr;
+	unsigned int need_flush;
+	unsigned int fullmm;
+	unsigned int tlb_nr;
+	unsigned long vaddrs[TLB_BATCH_NR];
+	struct page *pages[FREE_PTE_NR];
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_pending(struct mm_struct *,
+				  unsigned long, unsigned long *);
+#endif
+
+extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *);
+extern void flush_tlb_pending(void);
+
+static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
+
+	BUG_ON(mp->tlb_nr);
+
+	mp->mm = mm;
+	mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U;
+	mp->fullmm = full_mm_flush;
+
+	return mp;
+}
+
+
+static inline void tlb_flush_mmu(struct mmu_gather *mp)
+{
+	if (mp->need_flush) {
+		free_pages_and_swap_cache(mp->pages, mp->pages_nr);
+		mp->pages_nr = 0;
+		mp->need_flush = 0;
+	}
+
+}
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+#define do_flush_tlb_mm(mm) smp_flush_tlb_mm(mm)
+#else
+#define do_flush_tlb_mm(mm) __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT)
+#endif
+
+static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end)
+{
+	tlb_flush_mmu(mp);
+
+	if (mp->fullmm)
+		mp->fullmm = 0;
+	else
+		flush_tlb_pending();
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
+{
+	if (tlb_fast_mode(mp)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	mp->need_flush = 1;
+	mp->pages[mp->pages_nr++] = page;
+	if (mp->pages_nr >= FREE_PTE_NR)
+		tlb_flush_mmu(mp);
+}
+
+#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
+#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+
+#define tlb_migrate_finish(mm)	do { } while (0)
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+#endif /* _SPARC64_TLB_H */
diff --git a/arch/sparc/include/asm/tlbflush.h b/arch/sparc/include/asm/tlbflush.h
new file mode 100644
index 00000000000..2c9629fad1e
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLBFLUSH_H
+#define ___ASM_SPARC_TLBFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlbflush_64.h>
+#else
+#include <asm/tlbflush_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/tlbflush_32.h b/arch/sparc/include/asm/tlbflush_32.h
new file mode 100644
index 00000000000..fe0a71abc9b
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush_32.h
@@ -0,0 +1,60 @@
+#ifndef _SPARC_TLBFLUSH_H
+#define _SPARC_TLBFLUSH_H
+
+#include <linux/mm.h>
+// #include <asm/processor.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs	XXX Exists?
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)()
+#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm)
+#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end)
+#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr)
+
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+extern void smp_flush_tlb_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)()
+#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm)
+#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end)
+#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr)
+
+// #define flush_tlb() flush_tlb_mm(current->active_mm)	/* XXX Sure? */
+
+/*
+ * This is a kludge, until I know better. --zaitcev XXX
+ */
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	flush_tlb_all();
+}
+
+#endif /* _SPARC_TLBFLUSH_H */
diff --git a/arch/sparc/include/asm/tlbflush_64.h b/arch/sparc/include/asm/tlbflush_64.h
new file mode 100644
index 00000000000..fbb675dbe0c
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush_64.h
@@ -0,0 +1,44 @@
+#ifndef _SPARC64_TLBFLUSH_H
+#define _SPARC64_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+
+/* TSB flush operations. */
+struct mmu_gather;
+extern void flush_tsb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tsb_user(struct mmu_gather *mp);
+
+/* TLB flush operations. */
+
+extern void flush_tlb_pending(void);
+
+#define flush_tlb_range(vma,start,end)	\
+	do { (void)(start); flush_tlb_pending(); } while (0)
+#define flush_tlb_page(vma,addr)	flush_tlb_pending()
+#define flush_tlb_mm(mm)		flush_tlb_pending()
+
+/* Local cpu only.  */
+extern void __flush_tlb_all(void);
+
+extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb_kernel_range(start,end) \
+do {	flush_tsb_kernel_range(start,end); \
+	__flush_tlb_kernel_range(start,end); \
+} while (0)
+
+#else /* CONFIG_SMP */
+
+extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#define flush_tlb_kernel_range(start, end) \
+do {	flush_tsb_kernel_range(start,end); \
+	smp_flush_tlb_kernel_range(start, end); \
+} while (0)
+
+#endif /* ! CONFIG_SMP */
+
+#endif /* _SPARC64_TLBFLUSH_H */
diff --git a/arch/sparc/include/asm/topology.h b/arch/sparc/include/asm/topology.h
new file mode 100644
index 00000000000..ee4f191d394
--- /dev/null
+++ b/arch/sparc/include/asm/topology.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TOPOLOGY_H
+#define ___ASM_SPARC_TOPOLOGY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/topology_64.h>
+#else
+#include <asm/topology_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/topology_32.h b/arch/sparc/include/asm/topology_32.h
new file mode 100644
index 00000000000..ee5ac9c9da2
--- /dev/null
+++ b/arch/sparc/include/asm/topology_32.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC_TOPOLOGY_H
+#define _ASM_SPARC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SPARC_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
new file mode 100644
index 00000000000..001c04027c8
--- /dev/null
+++ b/arch/sparc/include/asm/topology_64.h
@@ -0,0 +1,86 @@
+#ifndef _ASM_SPARC64_TOPOLOGY_H
+#define _ASM_SPARC64_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mmzone.h>
+
+static inline int cpu_to_node(int cpu)
+{
+	return numa_cpu_lookup_table[cpu];
+}
+
+#define parent_node(node)	(node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return numa_cpumask_lookup_table[node];
+}
+
+/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
+#define node_to_cpumask_ptr(v, node)		\
+		cpumask_t *v = &(numa_cpumask_lookup_table[node])
+
+#define node_to_cpumask_ptr_next(v, node)	\
+			   v = &(numa_cpumask_lookup_table[node])
+
+static inline int node_to_first_cpu(int node)
+{
+	cpumask_t tmp;
+	tmp = node_to_cpumask(node);
+	return first_cpu(tmp);
+}
+
+struct pci_bus;
+#ifdef CONFIG_PCI
+extern int pcibus_to_node(struct pci_bus *pbus);
+#else
+static inline int pcibus_to_node(struct pci_bus *pbus)
+{
+	return -1;
+}
+#endif
+
+#define pcibus_to_cpumask(bus)	\
+	(pcibus_to_node(bus) == -1 ? \
+	 CPU_MASK_ALL : \
+	 node_to_cpumask(pcibus_to_node(bus)))
+
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 2,			\
+	.newidle_idx		= 0, 			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_FORK	\
+				| SD_BALANCE_EXEC	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+}
+
+#else /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* !(CONFIG_NUMA) */
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu)	(cpu_data(cpu).proc_id)
+#define topology_core_id(cpu)			(cpu_data(cpu).core_id)
+#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
+#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
+#define mc_capable()				(sparc64_multi_core)
+#define smt_capable()				(sparc64_multi_core)
+#endif /* CONFIG_SMP */
+
+#define cpu_coregroup_map(cpu)			(cpu_core_map[cpu])
+
+#endif /* _ASM_SPARC64_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/traps.h b/arch/sparc/include/asm/traps.h
new file mode 100644
index 00000000000..bebdbf8f43a
--- /dev/null
+++ b/arch/sparc/include/asm/traps.h
@@ -0,0 +1,140 @@
+/*
+ * traps.h:  Format of entries for the Sparc trap table.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TRAPS_H
+#define _SPARC_TRAPS_H
+
+#define NUM_SPARC_TRAPS  255
+
+#ifndef __ASSEMBLY__
+
+/* This is for V8 compliant Sparc CPUS */
+struct tt_entry {
+	unsigned long inst_one;
+	unsigned long inst_two;
+	unsigned long inst_three;
+	unsigned long inst_four;
+};
+
+/* We set this to _start in system setup. */
+extern struct tt_entry *sparc_ttable;
+
+static inline unsigned long get_tbr(void)
+{
+	unsigned long tbr;
+
+	__asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr));
+	return tbr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+/* For patching the trap table at boot time, we need to know how to
+ * form various common Sparc instructions.  Thus these macros...
+ */
+
+#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff))
+
+/* The following assumes that the branch lies before the place we
+ * are branching to.  This is the case for a trap vector...
+ * You have been warned.
+ */
+#define SPARC_BRANCH(dest_addr, inst_addr) \
+          (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff))
+
+#define SPARC_RD_PSR_L0  (0xa1480000)
+#define SPARC_RD_WIM_L3  (0xa7500000)
+#define SPARC_NOP (0x01000000)
+
+/* Various interesting trap levels. */
+/* First, hardware traps. */
+#define SP_TRAP_TFLT    0x1          /* Text fault */
+#define SP_TRAP_II      0x2          /* Illegal Instruction */
+#define SP_TRAP_PI      0x3          /* Privileged Instruction */
+#define SP_TRAP_FPD     0x4          /* Floating Point Disabled */
+#define SP_TRAP_WOVF    0x5          /* Window Overflow */
+#define SP_TRAP_WUNF    0x6          /* Window Underflow */
+#define SP_TRAP_MNA     0x7          /* Memory Address Unaligned */
+#define SP_TRAP_FPE     0x8          /* Floating Point Exception */
+#define SP_TRAP_DFLT    0x9          /* Data Fault */
+#define SP_TRAP_TOF     0xa          /* Tag Overflow */
+#define SP_TRAP_WDOG    0xb          /* Watchpoint Detected */
+#define SP_TRAP_IRQ1    0x11         /* IRQ level 1 */
+#define SP_TRAP_IRQ2    0x12         /* IRQ level 2 */
+#define SP_TRAP_IRQ3    0x13         /* IRQ level 3 */
+#define SP_TRAP_IRQ4    0x14         /* IRQ level 4 */
+#define SP_TRAP_IRQ5    0x15         /* IRQ level 5 */
+#define SP_TRAP_IRQ6    0x16         /* IRQ level 6 */
+#define SP_TRAP_IRQ7    0x17         /* IRQ level 7 */
+#define SP_TRAP_IRQ8    0x18         /* IRQ level 8 */
+#define SP_TRAP_IRQ9    0x19         /* IRQ level 9 */
+#define SP_TRAP_IRQ10   0x1a         /* IRQ level 10 */
+#define SP_TRAP_IRQ11   0x1b         /* IRQ level 11 */
+#define SP_TRAP_IRQ12   0x1c         /* IRQ level 12 */
+#define SP_TRAP_IRQ13   0x1d         /* IRQ level 13 */
+#define SP_TRAP_IRQ14   0x1e         /* IRQ level 14 */
+#define SP_TRAP_IRQ15   0x1f         /* IRQ level 15 Non-maskable */
+#define SP_TRAP_RACC    0x20         /* Register Access Error ??? */
+#define SP_TRAP_IACC    0x21         /* Instruction Access Error */
+#define SP_TRAP_CPDIS   0x24         /* Co-Processor Disabled */
+#define SP_TRAP_BADFL   0x25         /* Unimplemented Flush Instruction */
+#define SP_TRAP_CPEXP   0x28         /* Co-Processor Exception */
+#define SP_TRAP_DACC    0x29         /* Data Access Error */
+#define SP_TRAP_DIVZ    0x2a         /* Divide By Zero */
+#define SP_TRAP_DSTORE  0x2b         /* Data Store Error ??? */
+#define SP_TRAP_DMM     0x2c         /* Data Access MMU Miss ??? */
+#define SP_TRAP_IMM     0x3c         /* Instruction Access MMU Miss ??? */
+
+/* Now the Software Traps... */
+#define SP_TRAP_SUNOS   0x80         /* SunOS System Call */
+#define SP_TRAP_SBPT    0x81         /* Software Breakpoint */
+#define SP_TRAP_SDIVZ   0x82         /* Software Divide-by-Zero trap */
+#define SP_TRAP_FWIN    0x83         /* Flush Windows */
+#define SP_TRAP_CWIN    0x84         /* Clean Windows */
+#define SP_TRAP_RCHK    0x85         /* Range Check */
+#define SP_TRAP_FUNA    0x86         /* Fix Unaligned Access */
+#define SP_TRAP_IOWFL   0x87         /* Integer Overflow */
+#define SP_TRAP_SOLARIS 0x88         /* Solaris System Call */
+#define SP_TRAP_NETBSD  0x89         /* NetBSD System Call */
+#define SP_TRAP_LINUX   0x90         /* Linux System Call */
+
+/* Names used for compatibility with SunOS */
+#define ST_SYSCALL              0x00
+#define ST_BREAKPOINT           0x01
+#define ST_DIV0                 0x02
+#define ST_FLUSH_WINDOWS        0x03
+#define ST_CLEAN_WINDOWS        0x04
+#define ST_RANGE_CHECK          0x05
+#define ST_FIX_ALIGN            0x06
+#define ST_INT_OVERFLOW         0x07
+
+/* Special traps... */
+#define SP_TRAP_KBPT1   0xfe         /* KADB/PROM Breakpoint one */
+#define SP_TRAP_KBPT2   0xff         /* KADB/PROM Breakpoint two */
+
+/* Handy Macros */
+/* Is this a trap we never expect to get? */
+#define BAD_TRAP_P(level) \
+        ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \
+	 (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \
+	 (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \
+	 (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \
+	 (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \
+	 (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1))
+
+/* Is this a Hardware trap? */
+#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS))
+
+/* Is this a Software trap? */
+#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2))
+
+/* Is this a system call for some OS we know about? */
+#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \
+			     (level == SP_TRAP_SOLARIS) || \
+			     (level == SP_TRAP_NETBSD) || \
+			     (level == SP_TRAP_LINUX))
+
+#endif /* !(_SPARC_TRAPS_H) */
diff --git a/arch/sparc/include/asm/tsb.h b/arch/sparc/include/asm/tsb.h
new file mode 100644
index 00000000000..76e4299dd9b
--- /dev/null
+++ b/arch/sparc/include/asm/tsb.h
@@ -0,0 +1,283 @@
+#ifndef _SPARC64_TSB_H
+#define _SPARC64_TSB_H
+
+/* The sparc64 TSB is similar to the powerpc hashtables.  It's a
+ * power-of-2 sized table of TAG/PTE pairs.  The cpu precomputes
+ * pointers into this table for 8K and 64K page sizes, and also a
+ * comparison TAG based upon the virtual address and context which
+ * faults.
+ *
+ * TLB miss trap handler software does the actual lookup via something
+ * of the form:
+ *
+ * 	ldxa		[%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
+ * 	ldxa		[%g0] ASI_{D,I}MMU, %g6
+ *	sllx		%g6, 22, %g6
+ *	srlx		%g6, 22, %g6
+ * 	ldda		[%g1] ASI_NUCLEUS_QUAD_LDD, %g4
+ * 	cmp		%g4, %g6
+ * 	bne,pn	%xcc, tsb_miss_{d,i}tlb
+ * 	 mov		FAULT_CODE_{D,I}TLB, %g3
+ * 	stxa		%g5, [%g0] ASI_{D,I}TLB_DATA_IN
+ * 	retry
+ *
+ *
+ * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
+ * PTE.  The TAG is of the same layout as the TLB TAG TARGET mmu
+ * register which is:
+ *
+ * -------------------------------------------------
+ * |  -  |  CONTEXT |  -  |    VADDR bits 63:22    |
+ * -------------------------------------------------
+ *  63 61 60      48 47 42 41                     0
+ *
+ * But actually, since we use per-mm TSB's, we zero out the CONTEXT
+ * field.
+ *
+ * Like the powerpc hashtables we need to use locking in order to
+ * synchronize while we update the entries.  PTE updates need locking
+ * as well.
+ *
+ * We need to carefully choose a lock bits for the TSB entry.  We
+ * choose to use bit 47 in the tag.  Also, since we never map anything
+ * at page zero in context zero, we use zero as an invalid tag entry.
+ * When the lock bit is set, this forces a tag comparison failure.
+ */
+
+#define TSB_TAG_LOCK_BIT	47
+#define TSB_TAG_LOCK_HIGH	(1 << (TSB_TAG_LOCK_BIT - 32))
+
+#define TSB_TAG_INVALID_BIT	46
+#define TSB_TAG_INVALID_HIGH	(1 << (TSB_TAG_INVALID_BIT - 32))
+
+#define TSB_MEMBAR	membar	#StoreStore
+
+/* Some cpus support physical address quad loads.  We want to use
+ * those if possible so we don't need to hard-lock the TSB mapping
+ * into the TLB.  We encode some instruction patching in order to
+ * support this.
+ *
+ * The kernel TSB is locked into the TLB by virtue of being in the
+ * kernel image, so we don't play these games for swapper_tsb access.
+ */
+#ifndef __ASSEMBLY__
+struct tsb_ldquad_phys_patch_entry {
+	unsigned int	addr;
+	unsigned int	sun4u_insn;
+	unsigned int	sun4v_insn;
+};
+extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
+	__tsb_ldquad_phys_patch_end;
+
+struct tsb_phys_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
+#endif
+#define TSB_LOAD_QUAD(TSB, REG)	\
+661:	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
+	.section	.tsb_ldquad_phys_patch, "ax"; \
+	.word		661b; \
+	ldda		[TSB] ASI_QUAD_LDD_PHYS, REG; \
+	ldda		[TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
+	.previous
+
+#define TSB_LOAD_TAG_HIGH(TSB, REG) \
+661:	lduwa		[TSB] ASI_N, REG; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	lduwa		[TSB] ASI_PHYS_USE_EC, REG; \
+	.previous
+
+#define TSB_LOAD_TAG(TSB, REG) \
+661:	ldxa		[TSB] ASI_N, REG; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	ldxa		[TSB] ASI_PHYS_USE_EC, REG; \
+	.previous
+
+#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
+661:	casa		[TSB] ASI_N, REG1, REG2; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	casa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+	.previous
+
+#define TSB_CAS_TAG(TSB, REG1, REG2) \
+661:	casxa		[TSB] ASI_N, REG1, REG2; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	casxa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+	.previous
+
+#define TSB_STORE(ADDR, VAL) \
+661:	stxa		VAL, [ADDR] ASI_N; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	stxa		VAL, [ADDR] ASI_PHYS_USE_EC; \
+	.previous
+
+#define TSB_LOCK_TAG(TSB, REG1, REG2)	\
+99:	TSB_LOAD_TAG_HIGH(TSB, REG1);	\
+	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
+	andcc	REG1, REG2, %g0;	\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_CAS_TAG_HIGH(TSB, REG1, REG2);	\
+	cmp	REG1, REG2;		\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_MEMBAR
+
+#define TSB_WRITE(TSB, TTE, TAG) \
+	add	TSB, 0x8, TSB;   \
+	TSB_STORE(TSB, TTE);     \
+	sub	TSB, 0x8, TSB;   \
+	TSB_MEMBAR;              \
+	TSB_STORE(TSB, TAG);
+
+#define KTSB_LOAD_QUAD(TSB, REG) \
+	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG;
+
+#define KTSB_STORE(ADDR, VAL) \
+	stxa		VAL, [ADDR] ASI_N;
+
+#define KTSB_LOCK_TAG(TSB, REG1, REG2)	\
+99:	lduwa	[TSB] ASI_N, REG1;	\
+	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
+	andcc	REG1, REG2, %g0;	\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	casa	[TSB] ASI_N, REG1, REG2;\
+	cmp	REG1, REG2;		\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_MEMBAR
+
+#define KTSB_WRITE(TSB, TTE, TAG) \
+	add	TSB, 0x8, TSB;   \
+	stxa	TTE, [TSB] ASI_N;     \
+	sub	TSB, 0x8, TSB;   \
+	TSB_MEMBAR;              \
+	stxa	TAG, [TSB] ASI_N;
+
+	/* Do a kernel page table walk.  Leaves physical PTE pointer in
+	 * REG1.  Jumps to FAIL_LABEL on early page table walk termination.
+	 * VADDR will not be clobbered, but REG2 will.
+	 */
+#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)	\
+	sethi		%hi(swapper_pg_dir), REG1; \
+	or		REG1, %lo(swapper_pg_dir), REG1; \
+	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	andn		REG2, 0x3, REG2; \
+	lduw		[REG1 + REG2], REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x7, REG2; \
+	add		REG1, REG2, REG1;
+
+	/* Do a user page table walk in MMU globals.  Leaves physical PTE
+	 * pointer in REG1.  Jumps to FAIL_LABEL on early page table walk
+	 * termination.  Physical base of page tables is in PHYS_PGD which
+	 * will not be modified.
+	 *
+	 * VADDR will not be clobbered, but REG1 and REG2 will.
+	 */
+#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL)	\
+	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x7, REG2; \
+	add		REG1, REG2, REG1;
+
+/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
+ * If no entry is found, FAIL_LABEL will be branched to.  On success
+ * the resulting PTE value will be left in REG1.  VADDR is preserved
+ * by this routine.
+ */
+#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
+	sethi		%hi(prom_trans), REG1; \
+	or		REG1, %lo(prom_trans), REG1; \
+97:	ldx		[REG1 + 0x00], REG2; \
+	brz,pn		REG2, FAIL_LABEL; \
+	 nop; \
+	ldx		[REG1 + 0x08], REG3; \
+	add		REG2, REG3, REG3; \
+	cmp		REG2, VADDR; \
+	bgu,pt		%xcc, 98f; \
+	 cmp		VADDR, REG3; \
+	bgeu,pt		%xcc, 98f; \
+	 ldx		[REG1 + 0x10], REG3; \
+	sub		VADDR, REG2, REG2; \
+	ba,pt		%xcc, 99f; \
+	 add		REG3, REG2, REG1; \
+98:	ba,pt		%xcc, 97b; \
+	 add		REG1, (3 * 8), REG1; \
+99:
+
+	/* We use a 32K TSB for the whole kernel, this allows to
+	 * handle about 16MB of modules and vmalloc mappings without
+	 * incurring many hash conflicts.
+	 */
+#define KERNEL_TSB_SIZE_BYTES	(32 * 1024)
+#define KERNEL_TSB_NENTRIES	\
+	(KERNEL_TSB_SIZE_BYTES / 16)
+#define KERNEL_TSB4M_NENTRIES	4096
+
+	/* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
+	 * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
+	 * and the found TTE will be left in REG1.  REG3 and REG4 must
+	 * be an even/odd pair of registers.
+	 *
+	 * VADDR and TAG will be preserved and not clobbered by this macro.
+	 */
+#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+	sethi		%hi(swapper_tsb), REG1; \
+	or		REG1, %lo(swapper_tsb), REG1; \
+	srlx		VADDR, PAGE_SHIFT, REG2; \
+	and		REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
+	sllx		REG2, 4, REG2; \
+	add		REG1, REG2, REG2; \
+	KTSB_LOAD_QUAD(REG2, REG3); \
+	cmp		REG3, TAG; \
+	be,a,pt		%xcc, OK_LABEL; \
+	 mov		REG4, REG1;
+
+#ifndef CONFIG_DEBUG_PAGEALLOC
+	/* This version uses a trick, the TAG is already (VADDR >> 22) so
+	 * we can make use of that for the index computation.
+	 */
+#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+	sethi		%hi(swapper_4m_tsb), REG1; \
+	or		REG1, %lo(swapper_4m_tsb), REG1; \
+	and		TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
+	sllx		REG2, 4, REG2; \
+	add		REG1, REG2, REG2; \
+	KTSB_LOAD_QUAD(REG2, REG3); \
+	cmp		REG3, TAG; \
+	be,a,pt		%xcc, OK_LABEL; \
+	 mov		REG4, REG1;
+#endif
+
+#endif /* !(_SPARC64_TSB_H) */
diff --git a/arch/sparc/include/asm/tsunami.h b/arch/sparc/include/asm/tsunami.h
new file mode 100644
index 00000000000..5bbd1d523ba
--- /dev/null
+++ b/arch/sparc/include/asm/tsunami.h
@@ -0,0 +1,64 @@
+/*
+ * tsunami.h:  Module specific definitions for Tsunami V8 Sparcs
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TSUNAMI_H
+#define _SPARC_TSUNAMI_H
+
+#include <asm/asi.h>
+
+/* The MMU control register on the Tsunami:
+ *
+ * -----------------------------------------------------------------------
+ * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME|
+ * -----------------------------------------------------------------------
+ *  31      24 23 22 21 20 19-18 17  16 14  13-12 11 10-9  8  7 6-2  1  0
+ *
+ * SW: Enable Software Table Walks  0=off 1=on
+ * AV: Address View bit
+ * DV: Data View bit
+ * MV: Memory View bit
+ * PC: Parity Control
+ * ITD: ITBR disable
+ * ALC: Alternate Cacheable
+ * PE: Parity Enable   0=off 1=on
+ * RC: Refresh Control
+ * IE: Instruction cache Enable  0=off 1=on
+ * DE: Data cache Enable  0=off 1=on
+ * NF: No Fault, same as all other SRMMUs
+ * ME: MMU Enable, same as all other SRMMUs
+ */
+
+#define TSUNAMI_SW        0x00800000
+#define TSUNAMI_AV        0x00400000
+#define TSUNAMI_DV        0x00200000
+#define TSUNAMI_MV        0x00100000
+#define TSUNAMI_PC        0x00020000
+#define TSUNAMI_ITD       0x00010000
+#define TSUNAMI_ALC       0x00008000
+#define TSUNAMI_PE        0x00001000
+#define TSUNAMI_RCMASK    0x00000C00
+#define TSUNAMI_IENAB     0x00000200
+#define TSUNAMI_DENAB     0x00000100
+#define TSUNAMI_NF        0x00000002
+#define TSUNAMI_ME        0x00000001
+
+static inline void tsunami_flush_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void tsunami_flush_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+#endif /* !(_SPARC_TSUNAMI_H) */
diff --git a/arch/sparc/include/asm/ttable.h b/arch/sparc/include/asm/ttable.h
new file mode 100644
index 00000000000..5708ba2719f
--- /dev/null
+++ b/arch/sparc/include/asm/ttable.h
@@ -0,0 +1,658 @@
+#ifndef _SPARC64_TTABLE_H
+#define _SPARC64_TTABLE_H
+
+#include <asm/utrap.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>
+#endif
+
+#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
+
+/* We need a "cleaned" instruction... */
+#define CLEAN_WINDOW							\
+	rdpr	%cleanwin, %l0;		add	%l0, 1, %l0;		\
+	wrpr	%l0, 0x0, %cleanwin;					\
+	clr	%o0;	clr	%o1;	clr	%o2;	clr	%o3;	\
+	clr	%o4;	clr	%o5;	clr	%o6;	clr	%o7;	\
+	clr	%l0;	clr	%l1;	clr	%l2;	clr	%l3;	\
+	clr	%l4;	clr	%l5;	clr	%l6;	clr	%l7;	\
+	retry;								\
+	nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
+
+#define TRAP(routine)					\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_7INSNS(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define TRAP_SAVEFPU(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, do_fptrap;			\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_NOSAVE(routine)				\
+	ba,pt	%xcc, routine;				\
+	 nop;						\
+	nop; nop; nop; nop; nop; nop;
+
+#define TRAP_NOSAVE_7INSNS(routine)			\
+	ba,pt	%xcc, routine;				\
+	 nop;						\
+	nop; nop; nop; nop; nop;
+
+#define TRAPTL1(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etraptl1;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_ARG(routine, arg)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	add	%sp, PTREGS_OFF, %o0;			\
+	call	routine;				\
+	 mov	arg, %o1;				\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define TRAPTL1_ARG(routine, arg)			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etraptl1;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	add	%sp, PTREGS_OFF, %o0;			\
+	call	routine;				\
+	 mov	arg, %o1;				\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define SYSCALL_TRAP(routine, systbl)			\
+	rdpr	%pil, %g2;				\
+	mov	TSTATE_SYSCALL, %g3;			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap_syscall;			\
+109:	 or	%g7, %lo(109b), %g7;			\
+	sethi	%hi(systbl), %l7;			\
+	ba,pt	%xcc, routine;				\
+	 or	%l7, %lo(systbl), %l7;
+
+#define TRAP_UTRAP(handler,lvl)				\
+	mov	handler, %g3;				\
+	ba,pt	%xcc, utrap_trap;			\
+	 mov	lvl, %g4;				\
+	nop;						\
+	nop;						\
+	nop;						\
+	nop;						\
+	nop;
+
+#ifdef CONFIG_COMPAT
+#define	LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
+#else
+#define	LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
+#endif
+#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
+#define GETCC_TRAP TRAP(getcc)
+#define SETCC_TRAP TRAP(setcc)
+#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+#define TRAP_IRQ(routine, level)			\
+	rdpr	%pil, %g2;				\
+	wrpr	%g0, 15, %pil;				\
+	sethi	%hi(1f-4), %g7;				\
+	ba,pt	%xcc, etrap_irq;			\
+	 or	%g7, %lo(1f-4), %g7;			\
+	nop;						\
+	nop;						\
+	nop;						\
+	.subsection	2;				\
+1:	call	trace_hardirqs_off;			\
+	 nop;						\
+	mov	level, %o0;				\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o1;			\
+	ba,a,pt	%xcc, rtrap_irq;			\
+	.previous;
+
+#else
+
+#define TRAP_IRQ(routine, level)			\
+	rdpr	%pil, %g2;				\
+	wrpr	%g0, 15, %pil;				\
+	ba,pt	%xcc, etrap_irq;			\
+	 rd	%pc, %g7;				\
+	mov	level, %o0;				\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o1;			\
+	ba,a,pt	%xcc, rtrap_irq;
+
+#endif
+
+#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
+
+#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
+
+#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
+
+#define FLUSH_WINDOW_TRAP						\
+	ba,pt	%xcc, etrap;						\
+	 rd	%pc, %g7;						\
+	flushw;								\
+	ldx	[%sp + PTREGS_OFF + PT_V9_TNPC], %l1;			\
+	add	%l1, 4, %l2;						\
+	stx	%l1, [%sp + PTREGS_OFF + PT_V9_TPC];			\
+	ba,pt	%xcc, rtrap;						\
+	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
+
+#ifdef CONFIG_KPROBES
+#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
+#else
+#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+#ifdef CONFIG_KGDB
+#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl)
+#else
+#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+#define SUN4V_ITSB_MISS					\
+	ldxa	[%g0] ASI_SCRATCHPAD, %g2;		\
+	ldx	[%g2 + HV_FAULT_I_ADDR_OFFSET], %g4;	\
+	ldx	[%g2 + HV_FAULT_I_CTX_OFFSET], %g5;	\
+	srlx	%g4, 22, %g6;				\
+	ba,pt	%xcc, sun4v_itsb_miss;			\
+	 nop;						\
+	nop;						\
+	nop;
+
+#define SUN4V_DTSB_MISS					\
+	ldxa	[%g0] ASI_SCRATCHPAD, %g2;		\
+	ldx	[%g2 + HV_FAULT_D_ADDR_OFFSET], %g4;	\
+	ldx	[%g2 + HV_FAULT_D_CTX_OFFSET], %g5;	\
+	srlx	%g4, 22, %g6;				\
+	ba,pt	%xcc, sun4v_dtsb_miss;			\
+	 nop;						\
+	nop;						\
+	nop;
+
+/* Before touching these macros, you owe it to yourself to go and
+ * see how arch/sparc64/kernel/winfixup.S works... -DaveM
+ *
+ * For the user cases we used to use the %asi register, but
+ * it turns out that the "wr xxx, %asi" costs ~5 cycles, so
+ * now we use immediate ASI loads and stores instead.  Kudos
+ * to Greg Onufer for pointing out this performance anomaly.
+ *
+ * Further note that we cannot use the g2, g4, g5, and g7 alternate
+ * globals in the spill routines, check out the save instruction in
+ * arch/sparc64/kernel/etrap.S to see what I mean about g2, and
+ * g4/g5 are the globals which are preserved by etrap processing
+ * for the caller of it.  The g7 register is the return pc for
+ * etrap.  Finally, g6 is the current thread register so we cannot
+ * us it in the spill handlers either.  Most of these rules do not
+ * apply to fill processing, only g6 is not usable.
+ */
+
+/* Normal kernel spill */
+#define SPILL_0_NORMAL					\
+	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
+	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
+	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
+	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
+	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
+	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
+	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
+	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
+	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
+	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
+	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
+	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
+	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
+	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
+	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
+	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
+	saved; retry; nop; nop; nop; nop; nop; nop;	\
+	nop; nop; nop; nop; nop; nop; nop; nop;
+
+#define SPILL_0_NORMAL_ETRAP				\
+etrap_kernel_spill:					\
+	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
+	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
+	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
+	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
+	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
+	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
+	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
+	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
+	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
+	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
+	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
+	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
+	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
+	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
+	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
+	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
+	saved;						\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop; nop; nop; nop;		\
+	nop; nop; nop; nop;
+
+/* Normal 64bit spill */
+#define SPILL_1_GENERIC(ASI)				\
+	add	%sp, STACK_BIAS + 0x00, %g1;		\
+	stxa	%l0, [%g1 + %g0] ASI;			\
+	mov	0x08, %g3;				\
+	stxa	%l1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l2, [%g1 + %g0] ASI;			\
+	stxa	%l3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l4, [%g1 + %g0] ASI;			\
+	stxa	%l5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l6, [%g1 + %g0] ASI;			\
+	stxa	%l7, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i0, [%g1 + %g0] ASI;			\
+	stxa	%i1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i2, [%g1 + %g0] ASI;			\
+	stxa	%i3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i4, [%g1 + %g0] ASI;			\
+	stxa	%i5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i6, [%g1 + %g0] ASI;			\
+	stxa	%i7, [%g1 + %g3] ASI;			\
+	saved;						\
+	retry; nop; nop;				\
+	b,a,pt	%xcc, spill_fixup_dax;			\
+	b,a,pt	%xcc, spill_fixup_mna;			\
+	b,a,pt	%xcc, spill_fixup;
+
+#define SPILL_1_GENERIC_ETRAP				\
+etrap_user_spill_64bit:					\
+	stxa	%l0, [%sp + STACK_BIAS + 0x00] %asi;	\
+	stxa	%l1, [%sp + STACK_BIAS + 0x08] %asi;	\
+	stxa	%l2, [%sp + STACK_BIAS + 0x10] %asi;	\
+	stxa	%l3, [%sp + STACK_BIAS + 0x18] %asi;	\
+	stxa	%l4, [%sp + STACK_BIAS + 0x20] %asi;	\
+	stxa	%l5, [%sp + STACK_BIAS + 0x28] %asi;	\
+	stxa	%l6, [%sp + STACK_BIAS + 0x30] %asi;	\
+	stxa	%l7, [%sp + STACK_BIAS + 0x38] %asi;	\
+	stxa	%i0, [%sp + STACK_BIAS + 0x40] %asi;	\
+	stxa	%i1, [%sp + STACK_BIAS + 0x48] %asi;	\
+	stxa	%i2, [%sp + STACK_BIAS + 0x50] %asi;	\
+	stxa	%i3, [%sp + STACK_BIAS + 0x58] %asi;	\
+	stxa	%i4, [%sp + STACK_BIAS + 0x60] %asi;	\
+	stxa	%i5, [%sp + STACK_BIAS + 0x68] %asi;	\
+	stxa	%i6, [%sp + STACK_BIAS + 0x70] %asi;	\
+	stxa	%i7, [%sp + STACK_BIAS + 0x78] %asi;	\
+	saved;						\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop;				\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;
+
+#define SPILL_1_GENERIC_ETRAP_FIXUP			\
+etrap_spill_fixup_64bit:				\
+	ldub	[%g6 + TI_WSAVED], %g1;			\
+	sll	%g1, 3, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%sp, [%g3 + TI_RWIN_SPTRS];		\
+	sll	%g1, 7, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%l0, [%g3 + TI_REG_WINDOW + 0x00];	\
+	stx	%l1, [%g3 + TI_REG_WINDOW + 0x08];	\
+	stx	%l2, [%g3 + TI_REG_WINDOW + 0x10];	\
+	stx	%l3, [%g3 + TI_REG_WINDOW + 0x18];	\
+	stx	%l4, [%g3 + TI_REG_WINDOW + 0x20];	\
+	stx	%l5, [%g3 + TI_REG_WINDOW + 0x28];	\
+	stx	%l6, [%g3 + TI_REG_WINDOW + 0x30];	\
+	stx	%l7, [%g3 + TI_REG_WINDOW + 0x38];	\
+	stx	%i0, [%g3 + TI_REG_WINDOW + 0x40];	\
+	stx	%i1, [%g3 + TI_REG_WINDOW + 0x48];	\
+	stx	%i2, [%g3 + TI_REG_WINDOW + 0x50];	\
+	stx	%i3, [%g3 + TI_REG_WINDOW + 0x58];	\
+	stx	%i4, [%g3 + TI_REG_WINDOW + 0x60];	\
+	stx	%i5, [%g3 + TI_REG_WINDOW + 0x68];	\
+	stx	%i6, [%g3 + TI_REG_WINDOW + 0x70];	\
+	stx	%i7, [%g3 + TI_REG_WINDOW + 0x78];	\
+	add	%g1, 1, %g1;				\
+	stb	%g1, [%g6 + TI_WSAVED];			\
+	saved;						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop
+
+/* Normal 32bit spill */
+#define SPILL_2_GENERIC(ASI)				\
+	srl	%sp, 0, %sp;				\
+	stwa	%l0, [%sp + %g0] ASI;			\
+	mov	0x04, %g3;				\
+	stwa	%l1, [%sp + %g3] ASI;			\
+	add	%sp, 0x08, %g1;				\
+	stwa	%l2, [%g1 + %g0] ASI;			\
+	stwa	%l3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%l4, [%g1 + %g0] ASI;			\
+	stwa	%l5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%l6, [%g1 + %g0] ASI;			\
+	stwa	%l7, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i0, [%g1 + %g0] ASI;			\
+	stwa	%i1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i2, [%g1 + %g0] ASI;			\
+	stwa	%i3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i4, [%g1 + %g0] ASI;			\
+	stwa	%i5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i6, [%g1 + %g0] ASI;			\
+	stwa	%i7, [%g1 + %g3] ASI;			\
+	saved;						\
+        retry; nop; nop;				\
+	b,a,pt	%xcc, spill_fixup_dax;			\
+	b,a,pt	%xcc, spill_fixup_mna;			\
+	b,a,pt	%xcc, spill_fixup;
+
+#define SPILL_2_GENERIC_ETRAP		\
+etrap_user_spill_32bit:			\
+	srl	%sp, 0, %sp;		\
+	stwa	%l0, [%sp + 0x00] %asi;	\
+	stwa	%l1, [%sp + 0x04] %asi;	\
+	stwa	%l2, [%sp + 0x08] %asi;	\
+	stwa	%l3, [%sp + 0x0c] %asi;	\
+	stwa	%l4, [%sp + 0x10] %asi;	\
+	stwa	%l5, [%sp + 0x14] %asi;	\
+	stwa	%l6, [%sp + 0x18] %asi;	\
+	stwa	%l7, [%sp + 0x1c] %asi;	\
+	stwa	%i0, [%sp + 0x20] %asi;	\
+	stwa	%i1, [%sp + 0x24] %asi;	\
+	stwa	%i2, [%sp + 0x28] %asi;	\
+	stwa	%i3, [%sp + 0x2c] %asi;	\
+	stwa	%i4, [%sp + 0x30] %asi;	\
+	stwa	%i5, [%sp + 0x34] %asi;	\
+	stwa	%i6, [%sp + 0x38] %asi;	\
+	stwa	%i7, [%sp + 0x3c] %asi;	\
+	saved;				\
+	sub	%g1, 2, %g1;		\
+	ba,pt	%xcc, etrap_save;	\
+	 wrpr	%g1, %cwp;		\
+	nop; nop; nop; nop;		\
+	nop; nop; nop; nop;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit;
+
+#define SPILL_2_GENERIC_ETRAP_FIXUP			\
+etrap_spill_fixup_32bit:				\
+	ldub	[%g6 + TI_WSAVED], %g1;			\
+	sll	%g1, 3, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%sp, [%g3 + TI_RWIN_SPTRS];		\
+	sll	%g1, 7, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stw	%l0, [%g3 + TI_REG_WINDOW + 0x00];	\
+	stw	%l1, [%g3 + TI_REG_WINDOW + 0x04];	\
+	stw	%l2, [%g3 + TI_REG_WINDOW + 0x08];	\
+	stw	%l3, [%g3 + TI_REG_WINDOW + 0x0c];	\
+	stw	%l4, [%g3 + TI_REG_WINDOW + 0x10];	\
+	stw	%l5, [%g3 + TI_REG_WINDOW + 0x14];	\
+	stw	%l6, [%g3 + TI_REG_WINDOW + 0x18];	\
+	stw	%l7, [%g3 + TI_REG_WINDOW + 0x1c];	\
+	stw	%i0, [%g3 + TI_REG_WINDOW + 0x20];	\
+	stw	%i1, [%g3 + TI_REG_WINDOW + 0x24];	\
+	stw	%i2, [%g3 + TI_REG_WINDOW + 0x28];	\
+	stw	%i3, [%g3 + TI_REG_WINDOW + 0x2c];	\
+	stw	%i4, [%g3 + TI_REG_WINDOW + 0x30];	\
+	stw	%i5, [%g3 + TI_REG_WINDOW + 0x34];	\
+	stw	%i6, [%g3 + TI_REG_WINDOW + 0x38];	\
+	stw	%i7, [%g3 + TI_REG_WINDOW + 0x3c];	\
+	add	%g1, 1, %g1;				\
+	stb	%g1, [%g6 + TI_WSAVED];			\
+	saved;						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop
+
+#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
+#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
+#define SPILL_3_NORMAL SPILL_0_NORMAL
+#define SPILL_4_NORMAL SPILL_0_NORMAL
+#define SPILL_5_NORMAL SPILL_0_NORMAL
+#define SPILL_6_NORMAL SPILL_0_NORMAL
+#define SPILL_7_NORMAL SPILL_0_NORMAL
+
+#define SPILL_0_OTHER SPILL_0_NORMAL
+#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
+#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
+#define SPILL_3_OTHER SPILL_3_NORMAL
+#define SPILL_4_OTHER SPILL_4_NORMAL
+#define SPILL_5_OTHER SPILL_5_NORMAL
+#define SPILL_6_OTHER SPILL_6_NORMAL
+#define SPILL_7_OTHER SPILL_7_NORMAL
+
+/* Normal kernel fill */
+#define FILL_0_NORMAL					\
+	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
+	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
+	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
+	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
+	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
+	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
+	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
+	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
+	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
+	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
+	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
+	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
+	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
+	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
+	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
+	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
+	restored; retry; nop; nop; nop; nop; nop; nop;	\
+	nop; nop; nop; nop; nop; nop; nop; nop;
+
+#define FILL_0_NORMAL_RTRAP				\
+kern_rtt_fill:						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 1, %g1;				\
+	wrpr	%g1, %cwp;				\
+	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
+	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
+	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
+	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
+	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
+	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
+	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
+	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
+	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
+	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
+	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
+	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
+	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
+	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
+	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
+	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
+	restored;					\
+	add	%g1, 1, %g1;				\
+	ba,pt	%xcc, kern_rtt_restore;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop;
+
+
+/* Normal 64bit fill */
+#define FILL_1_GENERIC(ASI)				\
+	add	%sp, STACK_BIAS + 0x00, %g1;		\
+	ldxa	[%g1 + %g0] ASI, %l0;			\
+	mov	0x08, %g2;				\
+	mov	0x10, %g3;				\
+	ldxa	[%g1 + %g2] ASI, %l1;			\
+	mov	0x18, %g5;				\
+	ldxa	[%g1 + %g3] ASI, %l2;			\
+	ldxa	[%g1 + %g5] ASI, %l3;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %l4;			\
+	ldxa	[%g1 + %g2] ASI, %l5;			\
+	ldxa	[%g1 + %g3] ASI, %l6;			\
+	ldxa	[%g1 + %g5] ASI, %l7;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %i0;			\
+	ldxa	[%g1 + %g2] ASI, %i1;			\
+	ldxa	[%g1 + %g3] ASI, %i2;			\
+	ldxa	[%g1 + %g5] ASI, %i3;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %i4;			\
+	ldxa	[%g1 + %g2] ASI, %i5;			\
+	ldxa	[%g1 + %g3] ASI, %i6;			\
+	ldxa	[%g1 + %g5] ASI, %i7;			\
+	restored;					\
+	retry; nop; nop; nop; nop;			\
+	b,a,pt	%xcc, fill_fixup_dax;			\
+	b,a,pt	%xcc, fill_fixup_mna;			\
+	b,a,pt	%xcc, fill_fixup;
+
+#define FILL_1_GENERIC_RTRAP				\
+user_rtt_fill_64bit:					\
+	ldxa	[%sp + STACK_BIAS + 0x00] %asi, %l0;	\
+	ldxa	[%sp + STACK_BIAS + 0x08] %asi, %l1;	\
+	ldxa	[%sp + STACK_BIAS + 0x10] %asi, %l2;	\
+	ldxa	[%sp + STACK_BIAS + 0x18] %asi, %l3;	\
+	ldxa	[%sp + STACK_BIAS + 0x20] %asi, %l4;	\
+	ldxa	[%sp + STACK_BIAS + 0x28] %asi, %l5;	\
+	ldxa	[%sp + STACK_BIAS + 0x30] %asi, %l6;	\
+	ldxa	[%sp + STACK_BIAS + 0x38] %asi, %l7;	\
+	ldxa	[%sp + STACK_BIAS + 0x40] %asi, %i0;	\
+	ldxa	[%sp + STACK_BIAS + 0x48] %asi, %i1;	\
+	ldxa	[%sp + STACK_BIAS + 0x50] %asi, %i2;	\
+	ldxa	[%sp + STACK_BIAS + 0x58] %asi, %i3;	\
+	ldxa	[%sp + STACK_BIAS + 0x60] %asi, %i4;	\
+	ldxa	[%sp + STACK_BIAS + 0x68] %asi, %i5;	\
+	ldxa	[%sp + STACK_BIAS + 0x70] %asi, %i6;	\
+	ldxa	[%sp + STACK_BIAS + 0x78] %asi, %i7;	\
+	ba,pt	%xcc, user_rtt_pre_restore;		\
+	 restored;					\
+	nop; nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop; nop;			\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;
+
+
+/* Normal 32bit fill */
+#define FILL_2_GENERIC(ASI)				\
+	srl	%sp, 0, %sp;				\
+	lduwa	[%sp + %g0] ASI, %l0;			\
+	mov	0x04, %g2;				\
+	mov	0x08, %g3;				\
+	lduwa	[%sp + %g2] ASI, %l1;			\
+	mov	0x0c, %g5;				\
+	lduwa	[%sp + %g3] ASI, %l2;			\
+	lduwa	[%sp + %g5] ASI, %l3;			\
+	add	%sp, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %l4;			\
+	lduwa	[%g1 + %g2] ASI, %l5;			\
+	lduwa	[%g1 + %g3] ASI, %l6;			\
+	lduwa	[%g1 + %g5] ASI, %l7;			\
+	add	%g1, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %i0;			\
+	lduwa	[%g1 + %g2] ASI, %i1;			\
+	lduwa	[%g1 + %g3] ASI, %i2;			\
+	lduwa	[%g1 + %g5] ASI, %i3;			\
+	add	%g1, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %i4;			\
+	lduwa	[%g1 + %g2] ASI, %i5;			\
+	lduwa	[%g1 + %g3] ASI, %i6;			\
+	lduwa	[%g1 + %g5] ASI, %i7;			\
+	restored;					\
+	retry; nop; nop; nop; nop;			\
+	b,a,pt	%xcc, fill_fixup_dax;			\
+	b,a,pt	%xcc, fill_fixup_mna;			\
+	b,a,pt	%xcc, fill_fixup;
+
+#define FILL_2_GENERIC_RTRAP				\
+user_rtt_fill_32bit:					\
+	srl	%sp, 0, %sp;				\
+	lduwa	[%sp + 0x00] %asi, %l0;			\
+	lduwa	[%sp + 0x04] %asi, %l1;			\
+	lduwa	[%sp + 0x08] %asi, %l2;			\
+	lduwa	[%sp + 0x0c] %asi, %l3;			\
+	lduwa	[%sp + 0x10] %asi, %l4;			\
+	lduwa	[%sp + 0x14] %asi, %l5;			\
+	lduwa	[%sp + 0x18] %asi, %l6;			\
+	lduwa	[%sp + 0x1c] %asi, %l7;			\
+	lduwa	[%sp + 0x20] %asi, %i0;			\
+	lduwa	[%sp + 0x24] %asi, %i1;			\
+	lduwa	[%sp + 0x28] %asi, %i2;			\
+	lduwa	[%sp + 0x2c] %asi, %i3;			\
+	lduwa	[%sp + 0x30] %asi, %i4;			\
+	lduwa	[%sp + 0x34] %asi, %i5;			\
+	lduwa	[%sp + 0x38] %asi, %i6;			\
+	lduwa	[%sp + 0x3c] %asi, %i7;			\
+	ba,pt	%xcc, user_rtt_pre_restore;		\
+	 restored;					\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop; nop;			\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;
+
+
+#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
+#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
+#define FILL_3_NORMAL FILL_0_NORMAL
+#define FILL_4_NORMAL FILL_0_NORMAL
+#define FILL_5_NORMAL FILL_0_NORMAL
+#define FILL_6_NORMAL FILL_0_NORMAL
+#define FILL_7_NORMAL FILL_0_NORMAL
+
+#define FILL_0_OTHER FILL_0_NORMAL
+#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
+#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
+#define FILL_3_OTHER FILL_3_NORMAL
+#define FILL_4_OTHER FILL_4_NORMAL
+#define FILL_5_OTHER FILL_5_NORMAL
+#define FILL_6_OTHER FILL_6_NORMAL
+#define FILL_7_OTHER FILL_7_NORMAL
+
+#endif /* !(_SPARC64_TTABLE_H) */
diff --git a/arch/sparc/include/asm/turbosparc.h b/arch/sparc/include/asm/turbosparc.h
new file mode 100644
index 00000000000..17c73282db0
--- /dev/null
+++ b/arch/sparc/include/asm/turbosparc.h
@@ -0,0 +1,125 @@
+/*
+ * turbosparc.h:  Defines specific to the TurboSparc module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_TURBOSPARC_H
+#define _SPARC_TURBOSPARC_H
+
+#include <asm/asi.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for TurboSparc modules.
+ *
+ * -------------------------------------------------------------------
+ * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME|
+ * -------------------------------------------------------------------
+ *  31    24 23-21 20-19 18 17 16-15 14 13-10  9  8  7  6-3   2  1  0
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the TurboSparc is in boot-mode or not.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu TurboSparc split I/D caches.
+ *
+ * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define TURBOSPARC_MMUENABLE    0x00000001
+#define TURBOSPARC_NOFAULT      0x00000002
+#define TURBOSPARC_ICSNOOP	0x00000004
+#define TURBOSPARC_PSO          0x00000080
+#define TURBOSPARC_DCENABLE     0x00000100   /* Enable data cache */
+#define TURBOSPARC_ICENABLE     0x00000200   /* Enable instruction cache */
+#define TURBOSPARC_BMODE        0x00004000   
+#define TURBOSPARC_PARITYODD	0x00020000   /* Parity odd, if enabled */
+#define TURBOSPARC_PCENABLE	0x00040000   /* Enable parity checking */
+
+/* Bits in the CPU configuration register for TurboSparc modules.
+ *
+ * -------------------------------------------------------
+ * |IOClk|SNP|AXClk| RAH |  WS |  RSV  |SBC|WT|uS2|SE|SCC|
+ * -------------------------------------------------------
+ *    31   30 29-28 27-26 25-23   22-8  7-6  5  4   3 2-0
+ *
+ */
+
+#define TURBOSPARC_SCENABLE 0x00000008	 /* Secondary cache enable */
+#define TURBOSPARC_uS2	    0x00000010   /* Swift compatibility mode */
+#define TURBOSPARC_WTENABLE 0x00000020	 /* Write thru for dcache */
+#define TURBOSPARC_SNENABLE 0x40000000	 /* DVMA snoop enable */
+
+#ifndef __ASSEMBLY__
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void turbosparc_inv_insn_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
+			     : "memory");
+}
+
+/* Bits [13:5] select one of 512 data cache tags */
+static inline void turbosparc_inv_data_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+			     : "memory");
+}
+
+static inline void turbosparc_flush_icache(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_insn_tag(addr);
+}
+
+static inline void turbosparc_flush_dcache(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_data_tag(addr);
+}
+
+static inline void turbosparc_idflash_clear(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20) {
+                turbosparc_inv_insn_tag(addr);
+                turbosparc_inv_data_tag(addr);
+	}
+}
+
+static inline void turbosparc_set_ccreg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t"
+			     : /* no outputs */
+			     : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS)
+			     : "memory");
+}
+
+static inline unsigned long turbosparc_get_ccreg(void)
+{
+	unsigned long regval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (regval)
+			     : "r" (0x600), "i" (ASI_M_MMUREGS));
+	return regval;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_TURBOSPARC_H) */
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
new file mode 100644
index 00000000000..8c28fde5eaa
--- /dev/null
+++ b/arch/sparc/include/asm/types.h
@@ -0,0 +1,62 @@
+#ifndef _SPARC_TYPES_H
+#define _SPARC_TYPES_H
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+
+/*** SPARC 64 bit ***/
+#include <asm-generic/int-l64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses come in generic and 64-bit flavours.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#else
+
+/*** SPARC 32 bit ***/
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(__sparc__) && defined(__arch64__) */
+
+#endif /* defined(_SPARC_TYPES_H) */
diff --git a/arch/sparc/include/asm/uaccess.h b/arch/sparc/include/asm/uaccess.h
new file mode 100644
index 00000000000..e88fbe5c045
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UACCESS_H
+#define ___ASM_SPARC_UACCESS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/uaccess_64.h>
+#else
+#include <asm/uaccess_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
new file mode 100644
index 00000000000..47d5619d43f
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -0,0 +1,336 @@
+/*
+ * uaccess.h: User space memore access functions.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <asm/vac-ops.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Sparc is not segmented, however we need to be able to fool access_ok()
+ * when doing system calls from kernel mode legitimately.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { 0 })
+#define USER_DS     ((mm_segment_t) { -1 })
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.current_ds)
+#define set_fs(val)	((current->thread.current_ds) = (val))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
+ * can be fairly lightweight.
+ * No one can read/write anything from userland in the kernel space by setting
+ * large size and address near to PAGE_OFFSET - a fault will break his intentions.
+ */
+#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; })
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
+#define access_ok(type, addr, size)					\
+	({ (void)(type); __access_ok((unsigned long)(addr), size); })
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ *
+ * There is a special way how to put a range of potentially faulting
+ * insns (like twenty ldd/std's with now intervening other instructions)
+ * You specify address of first in insn and 0 in fixup and in the next
+ * exception_table_entry you specify last potentially faulting insn + 1
+ * and in fixup the routine which should handle the fault.
+ * That fixup code will get
+ * (faulting_insn_address - first_insn_in_the_range_address)/4
+ * in %g2 (ie. index of the faulting instruction in the range).
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
+
+extern void __ret_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct __user *)(x))
+
+#define __put_user_check(x,addr,size) ({ \
+register int __pu_ret; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} } else { __pu_ret = -EFAULT; } __pu_ret; })
+
+#define __put_user_nocheck(x,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Put user asm, inline. */\n"					\
+"1:\t"	"st"#size " %1, %2\n\t"						\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\t"						\
+        ".previous\n\n\t"						\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\t"						\
+	".previous\n\n\t"						\
+       : "=&r" (ret) : "r" (x), "m" (*__m(addr)),			\
+	 "i" (-EFAULT))
+
+extern int __put_user_bad(void);
+
+#define __get_user_check(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_check_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; } else return retval; })
+
+#define __get_user_nocheck(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Get user asm, inline. */\n"					\
+"1:\t"	"ld"#size " %2, %1\n\t"						\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"clr	%1\n\t"							\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)				\
+if (__builtin_constant_p(retval) && retval == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size " %1, %0\n\n\t"					\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b,__ret_efault\n\n\t"					\
+	".previous\n\t"							\
+       : "=&r" (x) : "m" (*__m(addr)));					\
+else									\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size " %1, %0\n\n\t"					\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %2, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
+
+static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) to, n))
+		return __copy_user(to, (__force void __user *) from, n);
+	else
+		return n;
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_user(to, (__force void __user *) from, n);
+}
+
+static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) from, n))
+		return __copy_user((__force void __user *) to, from, n);
+	else
+		return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_user((__force void __user *) to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,3\n\t"
+		".previous\n\t"
+		"mov %2, %%o1\n"
+		"1:\n\t"
+		"call __bzero\n\t"
+		" mov %1, %%o0\n\t"
+		"mov %%o0, %0\n"
+		: "=r" (ret) : "r" (addr), "r" (size) :
+		"o0", "o1", "o2", "o3", "o4", "o5", "o7",
+		"g1", "g2", "g3", "g4", "g5", "g7", "cc");
+
+	return ret;
+}
+
+static inline unsigned long clear_user(void __user *addr, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) addr, n))
+		return __clear_user(addr, n);
+	else
+		return n;
+}
+
+extern long __strncpy_from_user(char *dest, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dest, const char __user *src, long count)
+{
+	if (__access_ok((unsigned long) src, count))
+		return __strncpy_from_user(dest, src, count);
+	else
+		return -EFAULT;
+}
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+static inline long strlen_user(const char __user *str)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else
+		return __strlen_user(str);
+}
+
+static inline long strnlen_user(const char __user *str, long len)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else
+		return __strnlen_user(str, len);
+}
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
new file mode 100644
index 00000000000..296ef30e05c
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -0,0 +1,273 @@
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/uaccess.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Sparc64 is segmented, though more like the M68K than the I386.
+ * We use the secondary ASI to address user memory, which references a
+ * completely different VM map, thus there is zero chance of the user
+ * doing something queer and tricking us into poking kernel memory.
+ *
+ * What is left here is basically what is needed for the other parts of
+ * the kernel that expect to be able to manipulate, erum, "segments".
+ * Or perhaps more properly, permissions.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { ASI_P })
+#define USER_DS     ((mm_segment_t) { ASI_AIUS })	/* har har har */
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_fs() ((mm_segment_t) { get_thread_current_ds() })
+#define get_ds() (KERNEL_DS)
+
+#define segment_eq(a,b)  ((a).seg == (b).seg)
+
+#define set_fs(val)								\
+do {										\
+	set_thread_current_ds((val).seg);					\
+	__asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg));	\
+} while(0)
+
+static inline int __access_ok(const void __user * addr, unsigned long size)
+{
+	return 1;
+}
+
+static inline int access_ok(int type, const void __user * addr, unsigned long size)
+{
+	return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+        unsigned int insn, fixup;
+};
+
+extern void __ret_efault(void);
+extern void __retl_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+#define __put_user(x,ptr) put_user(x,ptr)
+#define __get_user(x,ptr) get_user(x,ptr)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct *)(x))
+
+#define __put_user_nocheck(data,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(data,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(data,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(data,w,addr,__pu_ret); break; \
+case 8: __put_user_asm(data,x,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Put user asm, inline. */\n"					\
+"1:\t"	"st"#size "a %1, [%2] %%asi\n\t"				\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"sethi	%%hi(2b), %0\n\t"					\
+	"jmpl	%0 + %%lo(2b), %%g0\n\t"				\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\t"						\
+	".previous\n\n\t"						\
+       : "=r" (ret) : "r" (x), "r" (__m(addr)),				\
+	 "i" (-EFAULT))
+
+extern int __put_user_bad(void);
+
+#define __get_user_nocheck(data,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} data = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} data = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Get user asm, inline. */\n"					\
+"1:\t"	"ld"#size "a [%2] %%asi, %1\n\t"				\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"sethi	%%hi(2b), %0\n\t"					\
+	"clr	%1\n\t"							\
+	"jmpl	%0 + %%lo(2b), %%g0\n\t"				\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=r" (ret), "=r" (x) : "r" (__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)				\
+if (__builtin_constant_p(retval) && retval == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b,__ret_efault\n\n\t"					\
+	".previous\n\t"							\
+       : "=r" (x) : "r" (__m(addr)));					\
+else									\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %2, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=r" (x) : "r" (__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __must_check ___copy_from_user(void *to,
+						    const void __user *from,
+						    unsigned long size);
+extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
+					  unsigned long size);
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+	unsigned long ret = ___copy_from_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_from_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_from_user copy_from_user
+
+extern unsigned long __must_check ___copy_to_user(void __user *to,
+						  const void *from,
+						  unsigned long size);
+extern unsigned long copy_to_user_fixup(void __user *to, const void *from,
+					unsigned long size);
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+	unsigned long ret = ___copy_to_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_to_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_to_user copy_to_user
+
+extern unsigned long __must_check ___copy_in_user(void __user *to,
+						  const void __user *from,
+						  unsigned long size);
+extern unsigned long copy_in_user_fixup(void __user *to, void __user *from,
+					unsigned long size);
+static inline unsigned long __must_check
+copy_in_user(void __user *to, void __user *from, unsigned long size)
+{
+	unsigned long ret = ___copy_in_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_in_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_in_user copy_in_user
+
+extern unsigned long __must_check __clear_user(void __user *, unsigned long);
+
+#define clear_user __clear_user
+
+extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count);
+
+#define strncpy_from_user __strncpy_from_user
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+#define strlen_user __strlen_user
+#define strnlen_user __strnlen_user
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/include/asm/uctx.h b/arch/sparc/include/asm/uctx.h
new file mode 100644
index 00000000000..dc937c75ffd
--- /dev/null
+++ b/arch/sparc/include/asm/uctx.h
@@ -0,0 +1,71 @@
+/*
+ * uctx.h: Sparc64 {set,get}context() register state layouts.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_UCTX_H
+#define __SPARC64_UCTX_H
+
+#define MC_TSTATE	0
+#define MC_PC		1
+#define MC_NPC		2
+#define MC_Y		3
+#define MC_G1		4
+#define MC_G2		5
+#define MC_G3		6
+#define MC_G4		7
+#define MC_G5		8
+#define MC_G6		9
+#define MC_G7		10
+#define MC_O0		11
+#define MC_O1		12
+#define MC_O2		13
+#define MC_O3		14
+#define MC_O4		15
+#define MC_O5		16
+#define MC_O6		17
+#define MC_O7		18
+#define MC_NGREG	19
+
+typedef unsigned long mc_greg_t;
+typedef mc_greg_t mc_gregset_t[MC_NGREG];
+
+#define MC_MAXFPQ	16
+struct mc_fq {
+	unsigned long	*mcfq_addr;
+	unsigned int	mcfq_insn;
+};
+
+struct mc_fpu {
+	union {
+		unsigned int	sregs[32];
+		unsigned long	dregs[32];
+		long double	qregs[16];
+	} mcfpu_fregs;
+	unsigned long	mcfpu_fsr;
+	unsigned long	mcfpu_fprs;
+	unsigned long	mcfpu_gsr;
+	struct mc_fq	*mcfpu_fq;
+	unsigned char	mcfpu_qcnt;
+	unsigned char	mcfpu_qentsz;
+	unsigned char	mcfpu_enab;
+};
+typedef struct mc_fpu mc_fpu_t;
+
+typedef struct {
+	mc_gregset_t	mc_gregs;
+	mc_greg_t	mc_fp;
+	mc_greg_t	mc_i7;
+	mc_fpu_t	mc_fpregs;
+} mcontext_t;
+
+struct ucontext {
+	struct ucontext		*uc_link;
+	unsigned long		uc_flags;
+	sigset_t		uc_sigmask;
+	mcontext_t		uc_mcontext;
+};
+typedef struct ucontext ucontext_t;
+
+#endif /* __SPARC64_UCTX_H */
diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h
new file mode 100644
index 00000000000..11d2d5fb590
--- /dev/null
+++ b/arch/sparc/include/asm/unaligned.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_SPARC_UNALIGNED_H
+#define _ASM_SPARC_UNALIGNED_H
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_SPARC_UNALIGNED_H */
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
new file mode 100644
index 00000000000..4207fb362da
--- /dev/null
+++ b/arch/sparc/include/asm/unistd.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UNISTD_H
+#define ___ASM_SPARC_UNISTD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/unistd_64.h>
+#else
+#include <asm/unistd_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/unistd_32.h b/arch/sparc/include/asm/unistd_32.h
new file mode 100644
index 00000000000..648643a9f13
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef _SPARC_UNISTD_H
+#define _SPARC_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+#define __NR_lchown32            31 /* Linux sparc32 specific                      */
+#define __NR_fchown32            32 /* Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+#define __NR_chown32             35 /* Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+#define __NR_getuid32            44 /* Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+/* #define __NR_memory_ordering  52    Linux sparc64 specific			   */
+#define __NR_getgid32            53 /* Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+#define __NR_mmap2		 56 /* Linux sparc32 Specific			   */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64		 63 /* Linux Specific			           */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+#define __NR_geteuid32           69 /* Linux sparc32, sbrk under SunOS             */
+#define __NR_getegid32           70 /* Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+#define __NR_setreuid32          72 /* Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+#define __NR_truncate64		 77 /* Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+#define __NR_setgroups32         82 /* Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+#define __NR_ftruncate64	 84 /* Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+#define __NR_setuid32            87 /* Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+#define __NR_setgid32            89 /* Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+#define __NR_setfsuid32          91 /* Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+#define __NR_setfsgid32          94 /* Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid32        108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid32        109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid32        110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid32        111 /* Linux Specific, sigpause under SunOS	   */
+#define __NR_setregid32         112 /* Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+#define __NR_getgroups32        115 /* Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux Specific			           */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux Specific			           */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit          144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+#define __NR_fcntl64		155 /* Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific				   */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+/* #define __NR_utrap_install   164    Linux sparc64 specific			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#define __NR_time               231 /* Linux Specific                              */
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range	255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_tee		280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+#define __NR_openat		284
+#define __NR_mkdirat		285
+#define __NR_mknodat		286
+#define __NR_fchownat		287
+#define __NR_futimesat		288
+#define __NR_fstatat64		289
+#define __NR_unlinkat		290
+#define __NR_renameat		291
+#define __NR_linkat		292
+#define __NR_symlinkat		293
+#define __NR_readlinkat		294
+#define __NR_fchmodat		295
+#define __NR_faccessat		296
+#define __NR_pselect6		297
+#define __NR_ppoll		298
+#define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
+#define __NR_migrate_pages	302
+#define __NR_mbind		303
+#define __NR_get_mempolicy	304
+#define __NR_set_mempolicy	305
+#define __NR_kexec_load		306
+#define __NR_move_pages		307
+#define __NR_getcpu		308
+#define __NR_epoll_pwait	309
+#define __NR_utimensat		310
+#define __NR_signalfd		311
+#define __NR_timerfd_create	312
+#define __NR_eventfd		313
+#define __NR_fallocate		314
+#define __NR_timerfd_settime	315
+#define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
+
+#define NR_SYSCALLS		323
+
+/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
+ * it never had the plain ones and there is no value to adding those
+ * old versions into the syscall table.
+ */
+#define __IGNORE_setresuid
+#define __IGNORE_getresuid
+#define __IGNORE_setresgid
+#define __IGNORE_getresgid
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_UNISTD_H */
diff --git a/arch/sparc/include/asm/unistd_64.h b/arch/sparc/include/asm/unistd_64.h
new file mode 100644
index 00000000000..c5cc0e05232
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_64.h
@@ -0,0 +1,379 @@
+#ifndef _SPARC64_UNISTD_H
+#define _SPARC64_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+/* #define __NR_lchown32         31    Linux sparc32 specific                      */
+/* #define __NR_fchown32         32    Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+/* #define __NR_chown32          35    Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+/* #define __NR_getuid32         44    Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+#define __NR_memory_ordering	 52 /* Linux Specific				   */
+/* #define __NR_getgid32         53    Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+/* #define __NR_mmap2		 56    Linux sparc32 Specific                      */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64             63 /* Linux Specific                              */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+/* #define __NR_geteuid32        69    Linux sparc32, sbrk under SunOS             */
+/* #define __NR_getegid32        70    Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+/* #define __NR_setreuid32       72    Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+/* #define __NR_truncate64       77    Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+/* #define __NR_setgroups32      82    Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+/* #define __NR_ftruncate64      84    Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+/* #define __NR_setuid32         87    Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+/* #define __NR_setgid32         89    Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+/* #define __NR_setfsuid32       91    Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+/* #define __NR_setfsgid32       94    Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid          108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid          109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid          110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid          111 /* Linux Specific, sigpause under SunOS	   */
+/* #define __NR_setregid32       75    Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+/* #define __NR_getgroups32     115    Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux Specific                              */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux Specific			           */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit		144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+/* #define __NR_fcntl64         155    Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific				   */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+#define __NR_utrap_install	164 /* SYSV ABI/v9 required			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#ifdef __KERNEL__
+#define __NR_time		231 /* Linux sparc32                               */
+#endif
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range	255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_tee		280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+#define __NR_openat		284
+#define __NR_mkdirat		285
+#define __NR_mknodat		286
+#define __NR_fchownat		287
+#define __NR_futimesat		288
+#define __NR_fstatat64		289
+#define __NR_unlinkat		290
+#define __NR_renameat		291
+#define __NR_linkat		292
+#define __NR_symlinkat		293
+#define __NR_readlinkat		294
+#define __NR_fchmodat		295
+#define __NR_faccessat		296
+#define __NR_pselect6		297
+#define __NR_ppoll		298
+#define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
+#define __NR_migrate_pages	302
+#define __NR_mbind		303
+#define __NR_get_mempolicy	304
+#define __NR_set_mempolicy	305
+#define __NR_kexec_load		306
+#define __NR_move_pages		307
+#define __NR_getcpu		308
+#define __NR_epoll_pwait	309
+#define __NR_utimensat		310
+#define __NR_signalfd		311
+#define __NR_timerfd_create	312
+#define __NR_eventfd		313
+#define __NR_fallocate		314
+#define __NR_timerfd_settime	315
+#define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
+
+#define NR_SYSCALLS		323
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC64_UNISTD_H */
diff --git a/arch/sparc/include/asm/upa.h b/arch/sparc/include/asm/upa.h
new file mode 100644
index 00000000000..5b1633223f9
--- /dev/null
+++ b/arch/sparc/include/asm/upa.h
@@ -0,0 +1,109 @@
+#ifndef _SPARC64_UPA_H
+#define _SPARC64_UPA_H
+
+#include <asm/asi.h>
+
+/* UPA level registers and defines. */
+
+/* UPA Config Register */
+#define UPA_CONFIG_RESV		0xffffffffc0000000 /* Reserved.                    */
+#define UPA_CONFIG_PCON		0x000000003fc00000 /* Depth of various sys queues. */
+#define UPA_CONFIG_MID		0x00000000003e0000 /* Module ID.                   */
+#define UPA_CONFIG_PCAP		0x000000000001ffff /* Port Capabilities.           */
+
+/* UPA Port ID Register */
+#define UPA_PORTID_FNP		0xff00000000000000 /* Hardcoded to 0xfc on ultra.  */
+#define UPA_PORTID_RESV		0x00fffff800000000 /* Reserved.                    */
+#define UPA_PORTID_ECCVALID     0x0000000400000000 /* Zero if mod can generate ECC */
+#define UPA_PORTID_ONEREAD      0x0000000200000000 /* Set if mod generates P_RASB  */
+#define UPA_PORTID_PINTRDQ      0x0000000180000000 /* # outstanding P_INT_REQ's    */
+#define UPA_PORTID_PREQDQ       0x000000007e000000 /* slave-wr's to mod supported  */
+#define UPA_PORTID_PREQRD       0x0000000001e00000 /* # incoming P_REQ's supported */
+#define UPA_PORTID_UPACAP       0x00000000001f0000 /* UPA capabilities of mod      */
+#define UPA_PORTID_ID           0x000000000000ffff /* Module Identification bits  */
+
+/* UPA I/O space accessors */
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+static inline unsigned char _upa_readb(unsigned long addr)
+{
+	unsigned char ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned short _upa_readw(unsigned long addr)
+{
+	unsigned short ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned int _upa_readl(unsigned long addr)
+{
+	unsigned int ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned long _upa_readq(unsigned long addr)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline void _upa_writeb(unsigned char b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */"
+			     : /* no outputs */
+			     : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writew(unsigned short w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */"
+			     : /* no outputs */
+			     : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writel(unsigned int l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */"
+			     : /* no outputs */
+			     : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writeq(unsigned long q, unsigned long addr)
+{
+	__asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */"
+			     : /* no outputs */
+			     : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define upa_readb(__addr)		(_upa_readb((unsigned long)(__addr)))
+#define upa_readw(__addr)		(_upa_readw((unsigned long)(__addr)))
+#define upa_readl(__addr)		(_upa_readl((unsigned long)(__addr)))
+#define upa_readq(__addr)		(_upa_readq((unsigned long)(__addr)))
+#define upa_writeb(__b, __addr)		(_upa_writeb((__b), (unsigned long)(__addr)))
+#define upa_writew(__w, __addr)		(_upa_writew((__w), (unsigned long)(__addr)))
+#define upa_writel(__l, __addr)		(_upa_writel((__l), (unsigned long)(__addr)))
+#define upa_writeq(__q, __addr)		(_upa_writeq((__q), (unsigned long)(__addr)))
+#endif /* __KERNEL__ && !__ASSEMBLY__ */
+
+#endif /* !(_SPARC64_UPA_H) */
diff --git a/arch/sparc/include/asm/user.h b/arch/sparc/include/asm/user.h
new file mode 100644
index 00000000000..3400ea87f14
--- /dev/null
+++ b/arch/sparc/include/asm/user.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_USER_H
+#define _SPARC_USER_H
+
+/* Nothing to define.  */
+
+#endif /* !(_SPARC_USER_H) */
diff --git a/arch/sparc/include/asm/utrap.h b/arch/sparc/include/asm/utrap.h
new file mode 100644
index 00000000000..b10e527c22d
--- /dev/null
+++ b/arch/sparc/include/asm/utrap.h
@@ -0,0 +1,51 @@
+/*
+ * include/asm/utrap.h
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASM_SPARC64_UTRAP_H
+#define __ASM_SPARC64_UTRAP_H
+
+#define UT_INSTRUCTION_EXCEPTION		1
+#define UT_INSTRUCTION_ERROR			2
+#define UT_INSTRUCTION_PROTECTION		3
+#define UT_ILLTRAP_INSTRUCTION			4
+#define UT_ILLEGAL_INSTRUCTION			5
+#define UT_PRIVILEGED_OPCODE			6
+#define UT_FP_DISABLED				7
+#define UT_FP_EXCEPTION_IEEE_754		8
+#define UT_FP_EXCEPTION_OTHER			9
+#define UT_TAG_OVERVIEW				10
+#define UT_DIVISION_BY_ZERO			11
+#define UT_DATA_EXCEPTION			12
+#define UT_DATA_ERROR				13
+#define UT_DATA_PROTECTION			14
+#define UT_MEM_ADDRESS_NOT_ALIGNED		15
+#define UT_PRIVILEGED_ACTION			16
+#define UT_ASYNC_DATA_ERROR			17
+#define UT_TRAP_INSTRUCTION_16			18
+#define UT_TRAP_INSTRUCTION_17			19
+#define UT_TRAP_INSTRUCTION_18			20
+#define UT_TRAP_INSTRUCTION_19			21
+#define UT_TRAP_INSTRUCTION_20			22
+#define UT_TRAP_INSTRUCTION_21			23
+#define UT_TRAP_INSTRUCTION_22			24
+#define UT_TRAP_INSTRUCTION_23			25
+#define UT_TRAP_INSTRUCTION_24			26
+#define UT_TRAP_INSTRUCTION_25			27
+#define UT_TRAP_INSTRUCTION_26			28
+#define UT_TRAP_INSTRUCTION_27			29
+#define UT_TRAP_INSTRUCTION_28			30
+#define UT_TRAP_INSTRUCTION_29			31
+#define UT_TRAP_INSTRUCTION_30			32
+#define UT_TRAP_INSTRUCTION_31			33
+
+#define	UTH_NOCHANGE				(-1)
+
+#ifndef __ASSEMBLY__
+typedef int utrap_entry_t;
+typedef void *utrap_handler_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/arch/sparc/include/asm/vac-ops.h b/arch/sparc/include/asm/vac-ops.h
new file mode 100644
index 00000000000..d10527611f1
--- /dev/null
+++ b/arch/sparc/include/asm/vac-ops.h
@@ -0,0 +1,134 @@
+#ifndef _SPARC_VAC_OPS_H
+#define _SPARC_VAC_OPS_H
+
+/* vac-ops.h: Inline assembly routines to do operations on the Sparc
+ *            VAC (virtual address cache) for the sun4c.
+ *
+ * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/sysen.h>
+#include <asm/contregs.h>
+#include <asm/asi.h>
+
+/* The SUN4C models have a virtually addressed write-through
+ * cache.
+ *
+ * The cache tags are directly accessible through an ASI and
+ * each have the form:
+ *
+ * ------------------------------------------------------------
+ * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ |
+ * ------------------------------------------------------------
+ *  31 25  24   22     21     20     19    18 16  15   2  1  0
+ *
+ * MBZ: These bits are either unused and/or reserved and should
+ *      be written as zeroes.
+ *
+ * CONTEXT: Records the context to which this cache line belongs.
+ *
+ * WRITE: A copy of the writable bit from the mmu pte access bits.
+ *
+ * PRIV: A copy of the privileged bit from the pte access bits.
+ *
+ * VALID: If set, this line is valid, else invalid.
+ *
+ * TagID: Fourteen bits of tag ID.
+ *
+ * Every virtual address is seen by the cache like this:
+ *
+ * ----------------------------------------
+ * |  RESV  | TagID | LINE | BYTE-in-LINE |
+ * ----------------------------------------
+ *  31    30 29   16 15   4 3            0
+ *
+ * RESV: Unused/reserved.
+ *
+ * TagID: Used to match the Tag-ID in that vac tags.
+ *
+ * LINE: Which line within the cache
+ *
+ * BYTE-in-LINE: Which byte within the cache line.
+ */
+
+/* Sun4c VAC Tags */
+#define S4CVACTAG_CID      0x01c00000
+#define S4CVACTAG_W        0x00200000
+#define S4CVACTAG_P        0x00100000
+#define S4CVACTAG_V        0x00080000
+#define S4CVACTAG_TID      0x0000fffc
+
+/* Sun4c VAC Virtual Address */
+/* These aren't used, why bother? (Anton) */
+#if 0
+#define S4CVACVA_TID       0x3fff0000
+#define S4CVACVA_LINE      0x0000fff0
+#define S4CVACVA_BIL       0x0000000f
+#endif
+
+/* The indexing of cache lines creates a problem.  Because the line
+ * field of a virtual address extends past the page offset within
+ * the virtual address it is possible to have what are called
+ * 'bad aliases' which will create inconsistencies.  So we must make
+ * sure that within a context that if a physical page is mapped
+ * more than once, that 'extra' line bits are the same.  If this is
+ * not the case, and thus is a 'bad alias' we must turn off the
+ * cacheable bit in the pte's of all such pages.
+ */
+
+#ifdef CONFIG_SUN4
+#define S4CVAC_BADBITS     0x0001e000
+#else
+#define S4CVAC_BADBITS    0x0000f000
+#endif
+
+/* The following is true if vaddr1 and vaddr2 would cause
+ * a 'bad alias'.
+ */
+#define S4CVAC_BADALIAS(vaddr1, vaddr2) \
+        ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \
+	 (S4CVAC_BADBITS))
+
+/* The following structure describes the characteristics of a sun4c
+ * VAC as probed from the prom during boot time.
+ */
+struct sun4c_vac_props {
+	unsigned int num_bytes;     /* Size of the cache */
+	unsigned int num_lines;     /* Number of cache lines */
+	unsigned int do_hwflushes;  /* Hardware flushing available? */
+	enum { VAC_NONE, VAC_WRITE_THROUGH,
+	    VAC_WRITE_BACK } type;  /* What type of VAC? */
+	unsigned int linesize;      /* Size of each line in bytes */
+	unsigned int log2lsize;     /* log2(linesize) */
+	unsigned int on;            /* VAC is enabled */
+};
+
+extern struct sun4c_vac_props sun4c_vacinfo;
+
+/* sun4c_enable_vac() enables the sun4c virtual address cache. */
+static inline void sun4c_enable_vac(void)
+{
+	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+			     "or    %%g1, %2, %%g1\n\t"
+			     "stba  %%g1, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" ((unsigned int) AC_SENABLE),
+			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+			     : "g1", "memory");
+	sun4c_vacinfo.on = 1;
+}
+
+/* sun4c_disable_vac() disables the virtual address cache. */
+static inline void sun4c_disable_vac(void)
+{
+	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+			     "andn  %%g1, %2, %%g1\n\t"
+			     "stba  %%g1, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" ((unsigned int) AC_SENABLE),
+			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+			     : "g1", "memory");
+	sun4c_vacinfo.on = 0;
+}
+
+#endif /* !(_SPARC_VAC_OPS_H) */
diff --git a/arch/sparc/include/asm/vaddrs.h b/arch/sparc/include/asm/vaddrs.h
new file mode 100644
index 00000000000..541e13755ce
--- /dev/null
+++ b/arch/sparc/include/asm/vaddrs.h
@@ -0,0 +1,64 @@
+#ifndef _SPARC_VADDRS_H
+#define _SPARC_VADDRS_H
+
+#include <asm/head.h>
+
+/*
+ * asm/vaddrs.h:  Here we define the virtual addresses at
+ *                      which important things will be mapped.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#define SRMMU_MAXMEM		0x0c000000
+
+#define SRMMU_NOCACHE_VADDR	(KERNBASE + SRMMU_MAXMEM)
+				/* = 0x0fc000000 */
+/* XXX Empiricals - this needs to go away - KMW */
+#define SRMMU_MIN_NOCACHE_PAGES (550)
+#define SRMMU_MAX_NOCACHE_PAGES	(1280)
+
+/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
+ * to determine the amount of memory that will be reserved as nocache:
+ *
+ * 256 pages will be taken as nocache per each
+ * SRMMU_NOCACHE_ALCRATIO MB of system memory.
+ *
+ * limits enforced:	nocache minimum = 256 pages
+ *			nocache maximum = 1280 pages
+ */
+#define SRMMU_NOCACHE_ALCRATIO	64	/* 256 pages per 64MB of system RAM */
+
+#define SUN4M_IOBASE_VADDR	0xfd000000 /* Base for mapping pages */
+#define IOBASE_VADDR		0xfe000000
+#define IOBASE_END		0xfe600000
+
+/*
+ * On the sun4/4c we need a place
+ * to reliably map locked down kernel data.  This includes the
+ * task_struct and kernel stack pages of each process plus the
+ * scsi buffers during dvma IO transfers, also the floppy buffers
+ * during pseudo dma which runs with traps off (no faults allowed).
+ * Some quick calculations yield:
+ *       NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
+ * Subtract this from 0xc00000 and you get 0x927C0 of vm left
+ * over to map SCSI dvma + floppy pseudo-dma buffers.  So be
+ * careful if you change NR_TASKS or else there won't be enough
+ * room for it all.
+ */
+#define SUN4C_LOCK_VADDR	0xff000000
+#define SUN4C_LOCK_END		0xffc00000
+
+#define KADB_DEBUGGER_BEGVM	0xffc00000 /* Where kern debugger is in virt-mem */
+#define KADB_DEBUGGER_ENDVM	0xffd00000
+#define DEBUG_FIRSTVADDR	KADB_DEBUGGER_BEGVM
+#define DEBUG_LASTVADDR		KADB_DEBUGGER_ENDVM
+
+#define LINUX_OPPROM_BEGVM	0xffd00000
+#define LINUX_OPPROM_ENDVM	0xfff00000
+
+#define DVMA_VADDR		0xfff00000 /* Base area of the DVMA on suns */
+#define DVMA_END		0xfffc0000
+
+#endif /* !(_SPARC_VADDRS_H) */
diff --git a/arch/sparc/include/asm/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h
new file mode 100644
index 00000000000..af8b69007b2
--- /dev/null
+++ b/arch/sparc/include/asm/vfc_ioctls.h
@@ -0,0 +1,58 @@
+/* Copyright (c) 1996 by Manish Vachharajani */
+
+#ifndef _LINUX_VFC_IOCTLS_H_
+#define	_LINUX_VFC_IOCTLS_H_
+
+	/* IOCTLs */
+#define VFC_IOCTL(a)          (('j' << 8) | a)
+#define VFCGCTRL	(VFC_IOCTL (0))	        /* get vfc attributes */
+#define VFCSCTRL	(VFC_IOCTL (1))  	/* set vfc attributes */
+#define VFCGVID		(VFC_IOCTL (2)) 	/* get video decoder attributes */
+#define VFCSVID		(VFC_IOCTL (3))	        /* set video decoder attributes */
+#define VFCHUE		(VFC_IOCTL (4))   	/* set hue */
+#define VFCPORTCHG	(VFC_IOCTL (5))  	/* change port */
+#define VFCRDINFO	(VFC_IOCTL (6))  	/* read info */
+
+	/* Options for setting the vfc attributes and status */
+#define MEMPRST		0x1	/* reset FIFO ptr. */
+#define CAPTRCMD	0x2	/* start capture and wait */
+#define DIAGMODE	0x3	/* diag mode */
+#define NORMMODE	0x4	/* normal mode */
+#define CAPTRSTR	0x5	/* start capture */
+#define CAPTRWAIT	0x6	/* wait for capture to finish */
+
+
+	/* Options for the decoder */
+#define STD_NTSC	0x1	/* NTSC mode */
+#define STD_PAL		0x2	/* PAL mode */
+#define COLOR_ON	0x3	/* force color ON */
+#define MONO		0x4	/* force color OFF */
+
+	/* Values returned by ioctl 2 */
+
+#define NO_LOCK	        1
+#define NTSC_COLOR	2
+#define NTSC_NOCOLOR    3
+#define PAL_COLOR	4
+#define PAL_NOCOLOR	5
+
+/* Not too sure what this does yet */
+	/* Options for setting Field number */
+#define ODD_FIELD	0x1
+#define EVEN_FIELD	0x0
+#define ACTIVE_ONLY     0x2
+#define NON_ACTIVE	0x0
+
+/* Debug options */
+#define VFC_I2C_SEND 0
+#define VFC_I2C_RECV 1
+
+struct vfc_debug_inout
+{
+	unsigned long addr;
+	unsigned long ret;
+	unsigned long len;
+	unsigned char __user *buffer;
+};
+
+#endif /* _LINUX_VFC_IOCTLS_H_ */
diff --git a/arch/sparc/include/asm/vga.h b/arch/sparc/include/asm/vga.h
new file mode 100644
index 00000000000..c69d5b2ba19
--- /dev/null
+++ b/arch/sparc/include/asm/vga.h
@@ -0,0 +1,33 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/types.h>
+
+#define VT_BUF_HAVE_RW
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, u16 *addr)
+{
+	BUG_ON((long) addr >= 0);
+
+	*addr = val;
+}
+
+static inline u16 scr_readw(const u16 *addr)
+{
+	BUG_ON((long) addr >= 0);
+
+	return *addr;
+}
+
+#define VGA_MAP_MEM(x,s) (x)
+
+#endif
diff --git a/arch/sparc/include/asm/viking.h b/arch/sparc/include/asm/viking.h
new file mode 100644
index 00000000000..989930aeb09
--- /dev/null
+++ b/arch/sparc/include/asm/viking.h
@@ -0,0 +1,253 @@
+/*
+ * viking.h:  Defines specific to the GNU/Viking MBUS module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_VIKING_H
+#define _SPARC_VIKING_H
+
+#include <asm/asi.h>
+#include <asm/mxcc.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for GNU/Viking modules.
+ *
+ * -----------------------------------------------------------
+ * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
+ * -----------------------------------------------------------
+ *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0
+ *
+ * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
+ *                            1 = Twalks are cacheable in E-cache
+ *
+ * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
+ * and never caches them internally (or so states the docs).  Therefore
+ * for machines lacking an E-cache (ie. in MBUS mode) this bit must
+ * remain cleared.
+ *
+ * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
+ *                            1 = Passthru physical accesses cacheable
+ *
+ * This indicates whether accesses are cacheable when no cachable bit
+ * is present in the pte when the processor is in boot-mode or the
+ * access does not need pte's for translation (ie. pass-thru ASI's).
+ * "Cachable" is only referring to E-cache (if present) and not the
+ * on chip split I/D caches of the GNU/Viking.
+ *
+ * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
+ *
+ * This enables snooping on the GNU/Viking bus.  This must be on
+ * for the hardware cache consistency mechanisms of the GNU/Viking
+ * to work at all.  On non-mxcc GNU/Viking modules the split I/D
+ * caches will snoop regardless of whether they are enabled, this
+ * takes care of the case where the I or D or both caches are turned
+ * off yet still contain valid data.  Note also that this bit does
+ * not affect GNU/Viking store-buffer snoops, those happen if the
+ * store-buffer is enabled no matter what.
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the GNU/Viking is in boot-mode or not,
+ * if it is then all instruction fetch physical addresses are
+ * computed as 0xff0000000 + low 28 bits of requested address.
+ * GNU/Viking boot-mode does not affect data accesses.  Also,
+ * in boot mode instruction accesses bypass the split on chip I/D
+ * caches, they may be cached by the GNU/MXCC if present and enabled.
+ *
+ * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
+ *
+ * This indicated the GNU/Viking configuration present.  If in
+ * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is
+ * not then the GNU/Viking is on a module VBUS connected directly
+ * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected
+ * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
+ *
+ * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
+ *
+ * The GNU/Viking store buffer allows the chip to continue execution
+ * after a store even if the data cannot be placed in one of the
+ * caches during that cycle.  If disabled, all stores operations
+ * occur synchronously.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu GNU/Viking split I/D caches.  Note,
+ * as mentioned above, these caches will snoop the bus in GNU/MBUS
+ * configurations even when disabled to avoid data corruption.
+ *
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define VIKING_MMUENABLE    0x00000001
+#define VIKING_NOFAULT      0x00000002
+#define VIKING_PSO          0x00000080
+#define VIKING_DCENABLE     0x00000100   /* Enable data cache */
+#define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */
+#define VIKING_SBENABLE     0x00000400   /* Enable store buffer */
+#define VIKING_MMODE        0x00000800   /* MBUS mode */
+#define VIKING_PCENABLE     0x00001000   /* Enable parity checking */
+#define VIKING_BMODE        0x00002000   
+#define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */
+#define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */
+#define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */
+#define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */
+
+/*
+ * GNU/Viking Breakpoint Action Register fields.
+ */
+#define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */
+
+/*
+ * GNU/Viking Cache Tags.
+ */
+#define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */
+#define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */
+#define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */
+
+#ifndef __ASSEMBLY__
+
+static inline void viking_flush_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_flush_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_unlock_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_unlock_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_set_bpreg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (regval), "i" (ASI_M_ACTION)
+			     : "memory");
+}
+
+static inline unsigned long viking_get_bpreg(void)
+{
+	unsigned long regval;
+
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t"
+			     : "=r" (regval)
+			     : "i" (ASI_M_ACTION));
+	return regval;
+}
+
+static inline void viking_get_dcache_ptag(int set, int block,
+					      unsigned long *data)
+{
+	unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
+			     0x80000000;
+	unsigned long info, page;
+
+	__asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
+			      "or %%g0, %%g2, %0\n\t"
+			      "or %%g0, %%g3, %1\n\t"
+			      : "=r" (info), "=r" (page)
+			      : "r" (ptag), "i" (ASI_M_DATAC_TAG)
+			      : "g2", "g3");
+	data[0] = info;
+	data[1] = page;
+}
+
+static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
+						   unsigned long *mxcc_cregp)
+{
+	unsigned long mreg = *mregp;
+	unsigned long mxcc_creg = *mxcc_cregp;
+
+	mreg &= ~(VIKING_PCENABLE);
+	mxcc_creg &= ~(MXCC_CTL_PARE);
+
+	__asm__ __volatile__ ("set 1f, %%g2\n\t"
+			      "andcc %%g2, 4, %%g0\n\t"
+			      "bne 2f\n\t"
+			      " nop\n"
+			      "1:\n\t"
+			      "sta %0, [%%g0] %3\n\t"
+			      "sta %1, [%2] %4\n\t"
+			      "b 1f\n\t"
+			      " nop\n\t"
+			      "nop\n"
+			      "2:\n\t"
+			      "sta %0, [%%g0] %3\n\t"
+			      "sta %1, [%2] %4\n"
+			      "1:\n\t"
+			      : /* no output */
+			      : "r" (mreg), "r" (mxcc_creg),
+			        "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
+			        "i" (ASI_M_MXCC)
+			      : "g2", "memory", "cc");
+	*mregp = mreg;
+	*mxcc_cregp = mxcc_creg;
+}
+
+static inline unsigned long viking_hwprobe(unsigned long vaddr)
+{
+	unsigned long val;
+
+	vaddr &= PAGE_MASK;
+	/* Probe all MMU entries. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+	if (!val)
+		return 0;
+
+	/* Probe region. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
+	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+		vaddr &= ~SRMMU_PGDIR_MASK;
+		vaddr >>= PAGE_SHIFT;
+		return val | (vaddr << 8);
+	}
+
+	/* Probe segment. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
+	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+		vaddr &= ~SRMMU_REAL_PMD_MASK;
+		vaddr >>= PAGE_SHIFT;
+		return val | (vaddr << 8);
+	}
+
+	/* Probe page. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
+	return val;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_VIKING_H) */
diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
new file mode 100644
index 00000000000..d4de32f0f8a
--- /dev/null
+++ b/arch/sparc/include/asm/vio.h
@@ -0,0 +1,406 @@
+#ifndef _SPARC64_VIO_H
+#define _SPARC64_VIO_H
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+#include <linux/log2.h>
+
+#include <asm/ldc.h>
+#include <asm/mdesc.h>
+
+struct vio_msg_tag {
+	u8			type;
+#define VIO_TYPE_CTRL		0x01
+#define VIO_TYPE_DATA		0x02
+#define VIO_TYPE_ERR		0x04
+
+	u8			stype;
+#define VIO_SUBTYPE_INFO	0x01
+#define VIO_SUBTYPE_ACK		0x02
+#define VIO_SUBTYPE_NACK	0x04
+
+	u16			stype_env;
+#define VIO_VER_INFO		0x0001
+#define VIO_ATTR_INFO		0x0002
+#define VIO_DRING_REG		0x0003
+#define VIO_DRING_UNREG		0x0004
+#define VIO_RDX			0x0005
+#define VIO_PKT_DATA		0x0040
+#define VIO_DESC_DATA		0x0041
+#define VIO_DRING_DATA		0x0042
+#define VNET_MCAST_INFO		0x0101
+
+	u32		sid;
+};
+
+struct vio_rdx {
+	struct vio_msg_tag	tag;
+	u64			resv[6];
+};
+
+struct vio_ver_info {
+	struct vio_msg_tag	tag;
+	u16			major;
+	u16			minor;
+	u8			dev_class;
+#define VDEV_NETWORK		0x01
+#define VDEV_NETWORK_SWITCH	0x02
+#define VDEV_DISK		0x03
+#define VDEV_DISK_SERVER	0x04
+
+	u8			resv1[3];
+	u64			resv2[5];
+};
+
+struct vio_dring_register {
+	struct vio_msg_tag	tag;
+	u64			dring_ident;
+	u32			num_descr;
+	u32			descr_size;
+	u16			options;
+#define VIO_TX_DRING		0x0001
+#define VIO_RX_DRING		0x0002
+	u16			resv;
+	u32			num_cookies;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+struct vio_dring_unregister {
+	struct vio_msg_tag	tag;
+	u64			dring_ident;
+	u64			resv[5];
+};
+
+/* Data transfer modes */
+#define VIO_PKT_MODE		0x01 /* Packet based transfer	*/
+#define VIO_DESC_MODE		0x02 /* In-band descriptors	*/
+#define VIO_DRING_MODE		0x03 /* Descriptor rings	*/
+
+struct vio_dring_data {
+	struct vio_msg_tag	tag;
+	u64			seq;
+	u64			dring_ident;
+	u32			start_idx;
+	u32			end_idx;
+	u8			state;
+#define VIO_DRING_ACTIVE	0x01
+#define VIO_DRING_STOPPED	0x02
+
+	u8			__pad1;
+	u16			__pad2;
+	u32			__pad3;
+	u64			__par4[2];
+};
+
+struct vio_dring_hdr {
+	u8			state;
+#define VIO_DESC_FREE		0x01
+#define VIO_DESC_READY		0x02
+#define VIO_DESC_ACCEPTED	0x03
+#define VIO_DESC_DONE		0x04
+	u8			ack;
+#define VIO_ACK_ENABLE		0x01
+#define VIO_ACK_DISABLE		0x00
+
+	u16			__pad1;
+	u32			__pad2;
+};
+
+/* VIO disk specific structures and defines */
+struct vio_disk_attr_info {
+	struct vio_msg_tag	tag;
+	u8			xfer_mode;
+	u8			vdisk_type;
+#define VD_DISK_TYPE_SLICE	0x01 /* Slice in block device	*/
+#define VD_DISK_TYPE_DISK	0x02 /* Entire block device	*/
+	u16			resv1;
+	u32			vdisk_block_size;
+	u64			operations;
+	u64			vdisk_size;
+	u64			max_xfer_size;
+	u64			resv2[2];
+};
+
+struct vio_disk_desc {
+	struct vio_dring_hdr	hdr;
+	u64			req_id;
+	u8			operation;
+#define VD_OP_BREAD		0x01 /* Block read			*/
+#define VD_OP_BWRITE		0x02 /* Block write			*/
+#define VD_OP_FLUSH		0x03 /* Flush disk contents		*/
+#define VD_OP_GET_WCE		0x04 /* Get write-cache status		*/
+#define VD_OP_SET_WCE		0x05 /* Enable/disable write-cache	*/
+#define VD_OP_GET_VTOC		0x06 /* Get VTOC			*/
+#define VD_OP_SET_VTOC		0x07 /* Set VTOC			*/
+#define VD_OP_GET_DISKGEOM	0x08 /* Get disk geometry		*/
+#define VD_OP_SET_DISKGEOM	0x09 /* Set disk geometry		*/
+#define VD_OP_SCSICMD		0x0a /* SCSI control command		*/
+#define VD_OP_GET_DEVID		0x0b /* Get device ID			*/
+#define VD_OP_GET_EFI		0x0c /* Get EFI				*/
+#define VD_OP_SET_EFI		0x0d /* Set EFI				*/
+	u8			slice;
+	u16			resv1;
+	u32			status;
+	u64			offset;
+	u64			size;
+	u32			ncookies;
+	u32			resv2;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+#define VIO_DISK_VNAME_LEN	8
+#define VIO_DISK_ALABEL_LEN	128
+#define VIO_DISK_NUM_PART	8
+
+struct vio_disk_vtoc {
+	u8			volume_name[VIO_DISK_VNAME_LEN];
+	u16			sector_size;
+	u16			num_partitions;
+	u8			ascii_label[VIO_DISK_ALABEL_LEN];
+	struct {
+		u16		id;
+		u16		perm_flags;
+		u32		resv;
+		u64		start_block;
+		u64		num_blocks;
+	} partitions[VIO_DISK_NUM_PART];
+};
+
+struct vio_disk_geom {
+	u16			num_cyl; /* Num data cylinders		*/
+	u16			alt_cyl; /* Num alternate cylinders	*/
+	u16			beg_cyl; /* Cyl off of fixed head area	*/
+	u16			num_hd;  /* Num heads			*/
+	u16			num_sec; /* Num sectors			*/
+	u16			ifact;   /* Interleave factor		*/
+	u16			apc;     /* Alts per cylinder (SCSI)	*/
+	u16			rpm;	 /* Revolutions per minute	*/
+	u16			phy_cyl; /* Num physical cylinders	*/
+	u16			wr_skip; /* Num sects to skip, writes	*/
+	u16			rd_skip; /* Num sects to skip, writes	*/
+};
+
+struct vio_disk_devid {
+	u16			resv;
+	u16			type;
+	u32			len;
+	char			id[0];
+};
+
+struct vio_disk_efi {
+	u64			lba;
+	u64			len;
+	char			data[0];
+};
+
+/* VIO net specific structures and defines */
+struct vio_net_attr_info {
+	struct vio_msg_tag	tag;
+	u8			xfer_mode;
+	u8			addr_type;
+#define VNET_ADDR_ETHERMAC	0x01
+	u16			ack_freq;
+	u32			resv1;
+	u64			addr;
+	u64			mtu;
+	u64			resv2[3];
+};
+
+#define VNET_NUM_MCAST		7
+
+struct vio_net_mcast_info {
+	struct vio_msg_tag	tag;
+	u8			set;
+	u8			count;
+	u8			mcast_addr[VNET_NUM_MCAST * 6];
+	u32			resv;
+};
+
+struct vio_net_desc {
+	struct vio_dring_hdr	hdr;
+	u32			size;
+	u32			ncookies;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+#define VIO_MAX_RING_COOKIES	24
+
+struct vio_dring_state {
+	u64			ident;
+	void			*base;
+	u64			snd_nxt;
+	u64			rcv_nxt;
+	u32			entry_size;
+	u32			num_entries;
+	u32			prod;
+	u32			cons;
+	u32			pending;
+	int			ncookies;
+	struct ldc_trans_cookie	cookies[VIO_MAX_RING_COOKIES];
+};
+
+static inline void *vio_dring_cur(struct vio_dring_state *dr)
+{
+	return dr->base + (dr->entry_size * dr->prod);
+}
+
+static inline void *vio_dring_entry(struct vio_dring_state *dr,
+				    unsigned int index)
+{
+	return dr->base + (dr->entry_size * index);
+}
+
+static inline u32 vio_dring_avail(struct vio_dring_state *dr,
+				  unsigned int ring_size)
+{
+	BUILD_BUG_ON(!is_power_of_2(ring_size));
+
+	return (dr->pending -
+		((dr->prod - dr->cons) & (ring_size - 1)));
+}
+
+#define VIO_MAX_TYPE_LEN	32
+#define VIO_MAX_COMPAT_LEN	64
+
+struct vio_dev {
+	u64			mp;
+	struct device_node	*dp;
+
+	char			type[VIO_MAX_TYPE_LEN];
+	char			compat[VIO_MAX_COMPAT_LEN];
+	int			compat_len;
+
+	u64			dev_no;
+
+	unsigned long		channel_id;
+
+	unsigned int		tx_irq;
+	unsigned int		rx_irq;
+
+	struct device		dev;
+};
+
+struct vio_driver {
+	struct list_head		node;
+	const struct vio_device_id	*id_table;
+	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
+	int (*remove)(struct vio_dev *dev);
+	void (*shutdown)(struct vio_dev *dev);
+	unsigned long			driver_data;
+	struct device_driver		driver;
+};
+
+struct vio_version {
+	u16		major;
+	u16		minor;
+};
+
+struct vio_driver_state;
+struct vio_driver_ops {
+	int	(*send_attr)(struct vio_driver_state *vio);
+	int	(*handle_attr)(struct vio_driver_state *vio, void *pkt);
+	void	(*handshake_complete)(struct vio_driver_state *vio);
+};
+
+struct vio_completion {
+	struct completion	com;
+	int			err;
+	int			waiting_for;
+};
+
+struct vio_driver_state {
+	/* Protects VIO handshake and, optionally, driver private state.  */
+	spinlock_t		lock;
+
+	struct ldc_channel	*lp;
+
+	u32			_peer_sid;
+	u32			_local_sid;
+	struct vio_dring_state	drings[2];
+#define VIO_DRIVER_TX_RING	0
+#define VIO_DRIVER_RX_RING	1
+
+	u8			hs_state;
+#define VIO_HS_INVALID		0x00
+#define VIO_HS_GOTVERS		0x01
+#define VIO_HS_GOT_ATTR		0x04
+#define VIO_HS_SENT_DREG	0x08
+#define VIO_HS_SENT_RDX		0x10
+#define VIO_HS_GOT_RDX_ACK	0x20
+#define VIO_HS_GOT_RDX		0x40
+#define VIO_HS_SENT_RDX_ACK	0x80
+#define VIO_HS_COMPLETE		(VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK)
+
+	u8			dev_class;
+
+	u8			dr_state;
+#define VIO_DR_STATE_TXREG	0x01
+#define VIO_DR_STATE_RXREG	0x02
+#define VIO_DR_STATE_TXREQ	0x10
+#define VIO_DR_STATE_RXREQ	0x20
+
+	u8			debug;
+#define VIO_DEBUG_HS		0x01
+#define VIO_DEBUG_DATA		0x02
+
+	void			*desc_buf;
+	unsigned int		desc_buf_len;
+
+	struct vio_completion	*cmp;
+
+	struct vio_dev		*vdev;
+
+	struct timer_list	timer;
+
+	struct vio_version	ver;
+
+	struct vio_version	*ver_table;
+	int			ver_table_entries;
+
+	char			*name;
+
+	struct vio_driver_ops	*ops;
+};
+
+#define viodbg(TYPE, f, a...) \
+do {	if (vio->debug & VIO_DEBUG_##TYPE) \
+		printk(KERN_INFO "vio: ID[%lu] " f, \
+		       vio->vdev->channel_id, ## a); \
+} while (0)
+
+extern int vio_register_driver(struct vio_driver *drv);
+extern void vio_unregister_driver(struct vio_driver *drv);
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vio_driver, driver);
+}
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+	return container_of(dev, struct vio_dev, dev);
+}
+
+extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len);
+extern void vio_link_state_change(struct vio_driver_state *vio, int event);
+extern void vio_conn_reset(struct vio_driver_state *vio);
+extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt);
+extern int vio_validate_sid(struct vio_driver_state *vio,
+			    struct vio_msg_tag *tp);
+extern u32 vio_send_sid(struct vio_driver_state *vio);
+extern int vio_ldc_alloc(struct vio_driver_state *vio,
+			 struct ldc_channel_config *base_cfg, void *event_arg);
+extern void vio_ldc_free(struct vio_driver_state *vio);
+extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev,
+			   u8 dev_class, struct vio_version *ver_table,
+			   int ver_table_size, struct vio_driver_ops *ops,
+			   char *name);
+
+extern void vio_port_up(struct vio_driver_state *vio);
+
+#endif /* _SPARC64_VIO_H */
diff --git a/arch/sparc/include/asm/visasm.h b/arch/sparc/include/asm/visasm.h
new file mode 100644
index 00000000000..de797b9bf55
--- /dev/null
+++ b/arch/sparc/include/asm/visasm.h
@@ -0,0 +1,62 @@
+#ifndef _SPARC64_VISASM_H
+#define _SPARC64_VISASM_H
+
+/* visasm.h:  FPU saving macros for VIS routines
+ *
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */
+
+#define VISEntry					\
+	rd		%fprs, %o5;			\
+	andcc		%o5, (FPRS_FEF|FPRS_DU), %g0;	\
+	be,pt		%icc, 297f;			\
+	 sethi		%hi(297f), %g7;			\
+	sethi		%hi(VISenter), %g1;		\
+	jmpl		%g1 + %lo(VISenter), %g0;	\
+	 or		%g7, %lo(297f), %g7;		\
+297:	wr		%g0, FPRS_FEF, %fprs;		\
+
+#define VISExit						\
+	wr		%g0, 0, %fprs;
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc.
+ * Must preserve %o5 between VISEntryHalf and VISExitHalf */
+
+#define VISEntryHalf					\
+	rd		%fprs, %o5;			\
+	andcc		%o5, FPRS_FEF, %g0;		\
+	be,pt		%icc, 297f;			\
+	 sethi		%hi(298f), %g7;			\
+	sethi		%hi(VISenterhalf), %g1;		\
+	jmpl		%g1 + %lo(VISenterhalf), %g0;	\
+	 or		%g7, %lo(298f), %g7;		\
+	clr		%o5;				\
+297:	wr		%o5, FPRS_FEF, %fprs;		\
+298:
+
+#define VISExitHalf					\
+	wr		%o5, 0, %fprs;
+
+#ifndef __ASSEMBLY__
+static inline void save_and_clear_fpu(void) {
+	__asm__ __volatile__ (
+"		rd %%fprs, %%o5\n"
+"		andcc %%o5, %0, %%g0\n"
+"		be,pt %%icc, 299f\n"
+"		 sethi %%hi(298f), %%g7\n"
+"		sethi %%hi(VISenter), %%g1\n"
+"		jmpl %%g1 + %%lo(VISenter), %%g0\n"
+"		 or %%g7, %%lo(298f), %%g7\n"
+"	298:	wr %%g0, 0, %%fprs\n"
+"	299:\n"
+"		" : : "i" (FPRS_FEF|FPRS_DU) :
+		"o5", "g1", "g2", "g3", "g7", "cc");
+}
+#endif
+
+#endif /* _SPARC64_ASI_H */
diff --git a/arch/sparc/include/asm/watchdog.h b/arch/sparc/include/asm/watchdog.h
new file mode 100644
index 00000000000..5baf2d3919c
--- /dev/null
+++ b/arch/sparc/include/asm/watchdog.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * watchdog - Driver interface for the hardware watchdog timers
+ * present on Sun Microsystems boardsets
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef _SPARC64_WATCHDOG_H
+#define _SPARC64_WATCHDOG_H
+
+#include <linux/watchdog.h>
+
+/* Solaris compatibility ioctls--
+ * Ref. <linux/watchdog.h> for standard linux watchdog ioctls
+ */
+#define WIOCSTART _IO (WATCHDOG_IOCTL_BASE, 10)		/* Start Timer		*/
+#define WIOCSTOP  _IO (WATCHDOG_IOCTL_BASE, 11)		/* Stop Timer		*/
+#define WIOCGSTAT _IOR(WATCHDOG_IOCTL_BASE, 12, int)/* Get Timer Status	*/
+
+/* Status flags from WIOCGSTAT ioctl
+ */
+#define WD_FREERUN	0x01	/* timer is running, interrupts disabled	*/
+#define WD_EXPIRED	0x02	/* timer has expired						*/
+#define WD_RUNNING	0x04	/* timer is running, interrupts enabled		*/
+#define WD_STOPPED	0x08	/* timer has not been started				*/
+#define WD_SERVICED 0x10	/* timer interrupt was serviced				*/
+
+#endif /* ifndef _SPARC64_WATCHDOG_H */
+
diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h
new file mode 100644
index 00000000000..5b0a06dc3bc
--- /dev/null
+++ b/arch/sparc/include/asm/winmacro.h
@@ -0,0 +1,135 @@
+/*
+ * winmacro.h: Window loading-unloading macros.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_WINMACRO_H
+#define _SPARC_WINMACRO_H
+
+#include <asm/ptrace.h>
+
+/* Store the register window onto the 8-byte aligned area starting
+ * at %reg.  It might be %sp, it might not, we don't care.
+ */
+#define STORE_WINDOW(reg) \
+	std	%l0, [%reg + RW_L0]; \
+	std	%l2, [%reg + RW_L2]; \
+	std	%l4, [%reg + RW_L4]; \
+	std	%l6, [%reg + RW_L6]; \
+	std	%i0, [%reg + RW_I0]; \
+	std	%i2, [%reg + RW_I2]; \
+	std	%i4, [%reg + RW_I4]; \
+	std	%i6, [%reg + RW_I6];
+
+/* Load a register window from the area beginning at %reg. */
+#define LOAD_WINDOW(reg) \
+	ldd	[%reg + RW_L0], %l0; \
+	ldd	[%reg + RW_L2], %l2; \
+	ldd	[%reg + RW_L4], %l4; \
+	ldd	[%reg + RW_L6], %l6; \
+	ldd	[%reg + RW_I0], %i0; \
+	ldd	[%reg + RW_I2], %i2; \
+	ldd	[%reg + RW_I4], %i4; \
+	ldd	[%reg + RW_I6], %i6;
+
+/* Loading and storing struct pt_reg trap frames. */
+#define LOAD_PT_INS(base_reg) \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I6], %i6;
+
+#define LOAD_PT_GLOBALS(base_reg) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G6], %g6;
+
+#define LOAD_PT_YREG(base_reg, scratch) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \
+        wr      %scratch, 0x0, %y;
+
+#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc;
+
+#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
+        LOAD_PT_YREG(base_reg, scratch) \
+        LOAD_PT_INS(base_reg) \
+        LOAD_PT_GLOBALS(base_reg) \
+        LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
+
+#define STORE_PT_INS(base_reg) \
+        std     %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \
+        std     %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \
+        std     %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \
+        std     %i6, [%base_reg + STACKFRAME_SZ + PT_I6];
+
+#define STORE_PT_GLOBALS(base_reg) \
+        st      %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \
+        std     %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \
+        std     %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \
+        std     %g6, [%base_reg + STACKFRAME_SZ + PT_G6];
+
+#define STORE_PT_YREG(base_reg, scratch) \
+        rd      %y, %scratch; \
+        st      %scratch, [%base_reg + STACKFRAME_SZ + PT_Y];
+
+#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        st      %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \
+        st      %pt_pc,  [%base_reg + STACKFRAME_SZ + PT_PC]; \
+        st      %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC];
+
+#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
+        STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
+        STORE_PT_GLOBALS(base_reg) \
+        STORE_PT_YREG(base_reg, g_scratch) \
+        STORE_PT_INS(base_reg)
+
+#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \
+        ld       [%cur_reg + TI_W_SAVED], %scratch; \
+        sll      %scratch, 2, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        st       %sp, [%scratch + TI_RWIN_SPTRS]; \
+        sub      %scratch, %cur_reg, %scratch; \
+        sll      %scratch, 4, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        STORE_WINDOW(scratch + TI_REG_WINDOW); \
+        sub      %scratch, %cur_reg, %scratch; \
+        srl      %scratch, 6, %scratch; \
+        add      %scratch, 1, %scratch; \
+        st       %scratch, [%cur_reg + TI_W_SAVED];
+
+#ifdef CONFIG_SMP
+#define LOAD_CURRENT4M(dest_reg, idreg) \
+        rd       %tbr, %idreg; \
+	sethi    %hi(current_set), %dest_reg; \
+        srl      %idreg, 10, %idreg; \
+	or       %dest_reg, %lo(current_set), %dest_reg; \
+	and      %idreg, 0xc, %idreg; \
+	ld       [%idreg + %dest_reg], %dest_reg;
+
+#define LOAD_CURRENT4D(dest_reg, idreg) \
+	lda	 [%g0] ASI_M_VIKING_TMP1, %idreg; \
+	sethi	%hi(C_LABEL(current_set)), %dest_reg; \
+	sll	%idreg, 2, %idreg; \
+	or	%dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \
+	ld	[%idreg + %dest_reg], %dest_reg;
+
+/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */
+#define LOAD_CURRENT(dest_reg, idreg) 					\
+	sethi	 %hi(___b_load_current), %idreg;			\
+	sethi    %hi(current_set), %dest_reg; 			\
+	sethi    %hi(boot_cpu_id4), %idreg; 			\
+	or       %dest_reg, %lo(current_set), %dest_reg; 	\
+	ldub	 [%idreg + %lo(boot_cpu_id4)], %idreg;		\
+	ld       [%idreg + %dest_reg], %dest_reg;
+#else
+#define LOAD_CURRENT(dest_reg, idreg) \
+        sethi    %hi(current_set), %idreg; \
+        ld       [%idreg + %lo(current_set)], %dest_reg;
+#endif
+
+#endif /* !(_SPARC_WINMACRO_H) */
diff --git a/arch/sparc/include/asm/xor.h b/arch/sparc/include/asm/xor.h
new file mode 100644
index 00000000000..8ed591c7db2
--- /dev/null
+++ b/arch/sparc/include/asm/xor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_XOR_H
+#define ___ASM_SPARC_XOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/xor_64.h>
+#else
+#include <asm/xor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/xor_32.h b/arch/sparc/include/asm/xor_32.h
new file mode 100644
index 00000000000..44bfa0787f3
--- /dev/null
+++ b/arch/sparc/include/asm/xor_32.h
@@ -0,0 +1,269 @@
+/*
+ * include/asm/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for 32-bit Sparc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * ldd/std SPARC instructions.
+ *
+ * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+static void
+sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3, unsigned long *p4)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%3 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%3 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%3 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%3 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3), "r" (p4)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%3 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%3 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%3 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%3 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%4 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%4 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%4 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%4 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+}
+
+static struct xor_block_template xor_block_SPARC = {
+	.name	= "SPARC",
+	.do_2	= sparc_2,
+	.do_3	= sparc_3,
+	.do_4	= sparc_4,
+	.do_5	= sparc_5,
+};
+
+/* For grins, also test the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_8regs);		\
+		xor_speed(&xor_block_32regs);		\
+		xor_speed(&xor_block_SPARC);		\
+	} while (0)
diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h
new file mode 100644
index 00000000000..bee4bf4be3a
--- /dev/null
+++ b/arch/sparc/include/asm/xor_64.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm/xor.h
+ *
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * UltraSparc Visual Instruction Set and Niagara block-init
+ * twin-load instructions.
+ *
+ * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/spitfire.h>
+
+extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *);
+extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *, unsigned long *);
+extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *, unsigned long *, unsigned long *);
+
+/* XXX Ugh, write cheetah versions... -DaveM */
+
+static struct xor_block_template xor_block_VIS = {
+        .name	= "VIS",
+        .do_2	= xor_vis_2,
+        .do_3	= xor_vis_3,
+        .do_4	= xor_vis_4,
+        .do_5	= xor_vis_5,
+};
+
+extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *);
+extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *, unsigned long *);
+extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_niagara = {
+        .name	= "Niagara",
+        .do_2	= xor_niagara_2,
+        .do_3	= xor_niagara_3,
+        .do_4	= xor_niagara_4,
+        .do_5	= xor_niagara_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_VIS);		\
+		xor_speed(&xor_block_niagara);		\
+	} while (0)
+
+/* For VIS for everything except Niagara.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+	((tlb_type == hypervisor && \
+	  (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA2)) ? \
+	 &xor_block_niagara : \
+	 &xor_block_VIS)
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 6707422c984..5267d48fb2c 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -56,7 +56,7 @@ __setup("apc=", apc_setup);
  * CPU idle callback function
  * See .../arch/sparc/kernel/process.c
  */
-void apc_swift_idle(void)
+static void apc_swift_idle(void)
 {
 #ifdef APC_DEBUG_LED
 	set_auxio(0x00, AUXIO_LED); 
@@ -85,54 +85,70 @@ static int apc_release(struct inode *inode, struct file *f)
 	return 0;
 }
 
-static int apc_ioctl(struct inode *inode, struct file *f, 
-		     unsigned int cmd, unsigned long __arg)
+static long apc_ioctl(struct file *f, unsigned int cmd, unsigned long __arg)
 {
 	__u8 inarg, __user *arg;
 
 	arg = (__u8 __user *) __arg;
+
+	lock_kernel();
+
 	switch (cmd) {
 	case APCIOCGFANCTL:
-		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg))
-				return -EFAULT;
+		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg)) {
+			unlock_kernel();
+			return -EFAULT;
+		}
 		break;
 
 	case APCIOCGCPWR:
-		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg))
+		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		break;
 
 	case APCIOCGBPORT:
-		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg))
+		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		break;
 
 	case APCIOCSFANCTL:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_REGMASK, APC_FANCTL_REG);
 		break;
 	case APCIOCSCPWR:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_REGMASK, APC_CPOWER_REG);
 		break;
 	case APCIOCSBPORT:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_BPMASK, APC_BPORT_REG);
 		break;
 	default:
+		unlock_kernel();
 		return -EINVAL;
 	};
 
+	unlock_kernel();
 	return 0;
 }
 
 static const struct file_operations apc_fops = {
-	.ioctl =	apc_ioctl,
-	.open =		apc_open,
-	.release =	apc_release,
+	.unlocked_ioctl =	apc_ioctl,
+	.open =			apc_open,
+	.release =		apc_release,
 };
 
 static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops };
diff --git a/arch/sparc/kernel/asm-offsets.c b/arch/sparc/kernel/asm-offsets.c
index cd3f7694e9b..b5bb99ed892 100644
--- a/arch/sparc/kernel/asm-offsets.c
+++ b/arch/sparc/kernel/asm-offsets.c
@@ -18,18 +18,6 @@ int foo(void)
 {
 	DEFINE(AOFF_task_thread, offsetof(struct task_struct, thread));
 	BLANK();
-	/* XXX This is the stuff for sclow.S, kill it. */
-	DEFINE(AOFF_task_pid, offsetof(struct task_struct, pid));
-	DEFINE(AOFF_task_uid, offsetof(struct task_struct, uid));
-	DEFINE(AOFF_task_gid, offsetof(struct task_struct, gid));
-	DEFINE(AOFF_task_euid, offsetof(struct task_struct, euid));
-	DEFINE(AOFF_task_egid, offsetof(struct task_struct, egid));
-	/* DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); */
-	DEFINE(ASIZ_task_uid,	sizeof(current->uid));
-	DEFINE(ASIZ_task_gid,	sizeof(current->gid));
-	DEFINE(ASIZ_task_euid,	sizeof(current->euid));
-	DEFINE(ASIZ_task_egid,	sizeof(current->egid));
-	BLANK();
 	DEFINE(AOFF_thread_fork_kpsr,
 			offsetof(struct thread_struct, fork_kpsr));
 	BLANK();
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index 92c6fc07e59..97294232259 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -69,7 +69,7 @@ static inline unsigned long ebus_alloc(size_t size)
 
 /*
  */
-int __init ebus_blacklist_irq(const char *name)
+static int __init ebus_blacklist_irq(const char *name)
 {
 	struct ebus_device_irq *dp;
 
@@ -83,8 +83,8 @@ int __init ebus_blacklist_irq(const char *name)
 	return 0;
 }
 
-void __init fill_ebus_child(struct device_node *dp,
-			    struct linux_ebus_child *dev)
+static void __init fill_ebus_child(struct device_node *dp,
+				   struct linux_ebus_child *dev)
 {
 	const int *regs;
 	const int *irqs;
@@ -144,7 +144,8 @@ void __init fill_ebus_child(struct device_node *dp,
 	}
 }
 
-void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *dev)
+static void __init fill_ebus_device(struct device_node *dp,
+				    struct linux_ebus_device *dev)
 {
 	const struct linux_prom_registers *regs;
 	struct linux_ebus_child *child;
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 4bcfe54f878..e8cdf715a54 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -19,6 +19,7 @@
 #include <asm/vaddrs.h>
 #include <asm/memreg.h>
 #include <asm/page.h>
+#include <asm/pgtable.h>
 #ifdef CONFIG_SUN4
 #include <asm/pgtsun4.h>
 #else
@@ -1195,8 +1196,9 @@ sys_rt_sigreturn:
 	be	1f
 	 nop
 
+	add	%sp, STACKFRAME_SZ, %o0
 	call	syscall_trace
-	 nop
+	 mov	1, %o1
 
 1:
 	/* We are returning to a signal handler. */
@@ -1286,8 +1288,12 @@ linux_fast_syscall:
 	 mov	%i3, %o3
 
 linux_syscall_trace:
+	add	%sp, STACKFRAME_SZ, %o0
 	call	syscall_trace
-	 nop
+	 mov	0, %o1
+	cmp	%o0, 0
+	bne	3f
+	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
 	mov	%i1, %o1
 	mov	%i2, %o2
@@ -1317,7 +1323,6 @@ linux_sparc_syscall:
 	bne	linux_fast_syscall
 	 /* Just do first insn from SAVE_ALL in the delay slot */
 
-	.globl	syscall_is_too_hard
 syscall_is_too_hard:
 	SAVE_ALL_HEAD
 	 rd	%wim, %l3
@@ -1337,6 +1342,7 @@ syscall_is_too_hard:
 	call	%l7
 	 mov	%i5, %o5
 
+3:
 	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
 
 ret_sys_call:
@@ -1374,6 +1380,8 @@ ret_sys_call:
 	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
 
 linux_syscall_trace2:
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	1, %o1
 	call	syscall_trace
 	 add	%l1, 0x4, %l2			/* npc = npc+4 */
 	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
@@ -1544,8 +1552,7 @@ kgdb_trap_low:
 #endif
 
 	.align	4
-	.globl	__handle_exception, flush_patch_exception
-__handle_exception:
+	.globl	flush_patch_exception
 flush_patch_exception:
 	FLUSH_ALL_KERNEL_WINDOWS;
 	ldd	[%o0], %o6
diff --git a/arch/sparc/kernel/etrap.S b/arch/sparc/kernel/etrap.S
index f37d961d67a..e806fcdc46d 100644
--- a/arch/sparc/kernel/etrap.S
+++ b/arch/sparc/kernel/etrap.S
@@ -228,7 +228,6 @@ tsetup_mmu_patchme:
 	 */
 #define glob_tmp     g1
 
-	.globl	tsetup_sun4c_stackchk
 tsetup_sun4c_stackchk:
 	/* Done by caller: andcc %sp, 0x7, %g0 */
 	bne	trap_setup_user_stack_is_bolixed
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 3bfd6085a91..50d9a16af79 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -32,7 +32,6 @@
  */
 
 	.align 4
-        .globl  cputyp
 cputyp:
         .word   1
 
@@ -1280,7 +1279,6 @@ halt_me:
  * gets initialized in c-code so all routines can use it.
  */
 
-	.globl	prom_vector_p
 prom_vector_p:
 		.word 0
 
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 7220562cdb3..fc511f3c4c1 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -24,7 +24,7 @@ static struct idprom idprom_buffer;
  * of the Sparc CPU and have a meaningful IDPROM machtype value that we
  * know about.  See asm-sparc/machines.h for empirical constants.
  */
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 /* First, Sun4's */
 { "Sun 4/100 Series", (SM_SUN4 | SM_4_110) },
 { "Sun 4/200 Series", (SM_SUN4 | SM_4_260) },
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 7b17522f59b..2a8a847764d 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -36,12 +36,12 @@
 #include <linux/pci.h>		/* struct pci_dev */
 #include <linux/proc_fs.h>
 #include <linux/scatterlist.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/vaddrs.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/sbus.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
@@ -49,13 +49,16 @@
 
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 
-struct resource *_sparc_find_resource(struct resource *r, unsigned long);
+static struct resource *_sparc_find_resource(struct resource *r,
+					     unsigned long);
 
 static void __iomem *_sparc_ioremap(struct resource *res, u32 bus, u32 pa, int sz);
 static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys,
     unsigned long size, char *name);
 static void _sparc_free_io(struct resource *res);
 
+static void register_proc_sparc_ioport(void);
+
 /* This points to the next to use virtual memory for DVMA mappings */
 static struct resource _sparc_dvma = {
 	.name = "sparc_dvma", .start = DVMA_VADDR, .end = DVMA_END - 1
@@ -539,8 +542,6 @@ void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
 
 int __init sbus_arch_preinit(void)
 {
-	extern void register_proc_sparc_ioport(void);
-
 	register_proc_sparc_ioport();
 
 #ifdef CONFIG_SUN4
@@ -853,8 +854,8 @@ _sparc_io_get_info(char *buf, char **start, off_t fpos, int length, int *eof,
  * XXX Too slow. Can have 8192 DVMA pages on sun4m in the worst case.
  * This probably warrants some sort of hashing.
  */
-struct resource *
-_sparc_find_resource(struct resource *root, unsigned long hit)
+static struct resource *_sparc_find_resource(struct resource *root,
+					     unsigned long hit)
 {
         struct resource *tmp;
 
@@ -865,7 +866,7 @@ _sparc_find_resource(struct resource *root, unsigned long hit)
 	return NULL;
 }
 
-void register_proc_sparc_ioport(void)
+static void register_proc_sparc_ioport(void)
 {
 #ifdef CONFIG_PROC_FS
 	create_proc_read_entry("io_map",0,NULL,_sparc_io_get_info,&sparc_iomap);
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index 087390b092b..93e1d1c6529 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -154,7 +154,7 @@ void (*sparc_init_timers)(irq_handler_t ) =
 struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 int static_irq_count;
 
-struct {
+static struct {
 	struct irqaction *action;
 	int flags;
 } sparc_irq[NR_IRQS];
diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c
index cc4c235c4f5..f58c537446a 100644
--- a/arch/sparc/kernel/of_device.c
+++ b/arch/sparc/kernel/of_device.c
@@ -70,7 +70,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(const u32 *addr);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
 };
 
 /*
@@ -130,8 +130,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
 {
+	if (flags)
+		return flags;
 	return IORESOURCE_MEM;
 }
 
@@ -194,17 +196,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 {
-	unsigned int flags = 0;
 	u32 w = addr[0];
 
+	/* For PCI, we override whatever child busses may have used.  */
+	flags = 0;
 	switch((w >> 24) & 0x03) {
 	case 0x01:
 		flags |= IORESOURCE_IO;
+		break;
+
 	case 0x02: /* 32 bits */
 	case 0x03: /* 64 bits */
 		flags |= IORESOURCE_MEM;
+		break;
 	}
 	if (w & 0x40000000)
 		flags |= IORESOURCE_PREFETCH;
@@ -235,7 +241,7 @@ static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 	return of_bus_default_map(addr, range, na, ns, pna);
 }
 
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 {
 	return IORESOURCE_MEM;
 }
@@ -362,10 +368,11 @@ static void __init build_device_resources(struct of_device *op,
 		int pna, pns;
 
 		size = of_read_addr(reg + na, ns);
-		flags = bus->get_flags(reg);
 
 		memcpy(addr, reg, na * 4);
 
+		flags = bus->get_flags(reg, 0);
+
 		/* If the immediate parent has no ranges property to apply,
 		 * just use a 1<->1 mapping.
 		 */
@@ -393,6 +400,8 @@ static void __init build_device_resources(struct of_device *op,
 					       dna, dns, pna))
 				break;
 
+			flags = pbus->get_flags(addr, flags);
+
 			dna = pna;
 			dns = pns;
 			dbus = pbus;
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index da48d248cc1..4bb430940a6 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -1,6 +1,6 @@
 /*  linux/arch/sparc/kernel/process.c
  *
- *  Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ *  Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
  */
 
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/ptrace.h>
@@ -177,6 +176,8 @@ void machine_power_off(void)
 	machine_halt();
 }
 
+#if 0
+
 static DEFINE_SPINLOCK(sparc_backtrace_lock);
 
 void __show_backtrace(unsigned long fp)
@@ -196,7 +197,7 @@ void __show_backtrace(unsigned long fp)
 		       rw->ins[4], rw->ins[5],
 		       rw->ins[6],
 		       rw->ins[7]);
-		print_symbol("%s\n", rw->ins[7]);
+		printk("%pS\n", (void *) rw->ins[7]);
 		rw = (struct reg_window *) rw->ins[6];
 	}
 	spin_unlock_irqrestore(&sparc_backtrace_lock, flags);
@@ -228,7 +229,6 @@ void smp_show_backtrace_all_cpus(void)
 }
 #endif
 
-#if 0
 void show_stackframe(struct sparc_stackf *sf)
 {
 	unsigned long size;
@@ -264,14 +264,14 @@ void show_regs(struct pt_regs *r)
 
         printk("PSR: %08lx PC: %08lx NPC: %08lx Y: %08lx    %s\n",
 	       r->psr, r->pc, r->npc, r->y, print_tainted());
-	print_symbol("PC: <%s>\n", r->pc);
+	printk("PC: <%pS>\n", (void *) r->pc);
 	printk("%%G: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       r->u_regs[0], r->u_regs[1], r->u_regs[2], r->u_regs[3],
 	       r->u_regs[4], r->u_regs[5], r->u_regs[6], r->u_regs[7]);
 	printk("%%O: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       r->u_regs[8], r->u_regs[9], r->u_regs[10], r->u_regs[11],
 	       r->u_regs[12], r->u_regs[13], r->u_regs[14], r->u_regs[15]);
-	print_symbol("RPC: <%s>\n", r->u_regs[15]);
+	printk("RPC: <%pS>\n", (void *) r->u_regs[15]);
 
 	printk("%%L: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       rw->locals[0], rw->locals[1], rw->locals[2], rw->locals[3],
@@ -306,7 +306,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 		rw = (struct reg_window *) fp;
 		pc = rw->ins[7];
 		printk("[%08lx : ", pc);
-		print_symbol("%s ] ", pc);
+		printk("%pS ] ", (void *) pc);
 		fp = rw->ins[6];
 	} while (++count < 16);
 	printk("\n");
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 81f3b929743..8ce6285a06d 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -21,6 +21,7 @@
 #include <linux/signal.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -287,7 +288,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 38 * sizeof(u32),
+		.n = 38,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = genregs32_get, .set = genregs32_set
 	},
@@ -303,7 +304,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 99 * sizeof(u32),
+		.n = 99,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = fpregs32_get, .set = fpregs32_set
 	},
@@ -450,21 +451,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig (current->exit_code, current, 1);
-		current->exit_code = 0;
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (syscall_exit_p)
+			tracehook_report_syscall_exit(regs, 0);
+		else
+			ret = tracehook_report_syscall_entry(regs);
 	}
+
+	return ret;
 }
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index ce30082ab26..4da2e1f6629 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -69,12 +69,13 @@ ret_trap_lockless_ipi:
 
 	ld	[%curptr + TI_FLAGS], %g2
 signal_p:
-	andcc	%g2, (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %g0
+	andcc	%g2, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 	bz,a	ret_trap_continue
 	 ld	[%sp + STACKFRAME_SZ + PT_PSR], %t_psr
 
+	mov	%g2, %o2
 	mov	%l5, %o1
-	call	do_signal
+	call	do_notify_resume
 	 add	%sp, STACKFRAME_SZ, %o0	! pt_regs ptr
 
 	/* Fall through. */
@@ -224,8 +225,6 @@ ret_trap_user_stack_is_bolixed:
 	b	signal_p
 	 ld	[%curptr + TI_FLAGS], %g2
 
-
-	.globl	sun4c_rett_stackchk
 sun4c_rett_stackchk:
 	be	1f
 	 and	%fp, 0xfff, %g1		! delay slot
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index a0ea0bc6f47..9e451b21202 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -67,7 +67,7 @@ struct screen_info screen_info = {
 extern unsigned long trapbase;
 
 /* Pretty sick eh? */
-void prom_sync_me(void)
+static void prom_sync_me(void)
 {
 	unsigned long prom_tbr, flags;
 
@@ -97,7 +97,7 @@ void prom_sync_me(void)
 	return;
 }
 
-unsigned int boot_flags __initdata = 0;
+static unsigned int boot_flags __initdata = 0;
 #define BOOTME_DEBUG  0x1
 
 /* Exported for mm/init.c:paging_init. */
diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c
index 3fd1df9f9ba..c94f91c8b6e 100644
--- a/arch/sparc/kernel/signal.c
+++ b/arch/sparc/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/binfmts.h>	/* do_coredum */
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -513,7 +514,7 @@ static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
+static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 {
 	struct k_sigaction ka;
 	int restart_syscall;
@@ -552,6 +553,8 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
 		 */
 		if (test_thread_flag(TIF_RESTORE_SIGMASK))
 			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
@@ -579,6 +582,17 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
 	}
 }
 
+void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0,
+		      unsigned long thread_info_flags)
+{
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal(regs, orig_i0);
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 asmlinkage int
 do_sys_sigstack(struct sigstack __user *ssptr, struct sigstack __user *ossptr,
 		unsigned long sp)
diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c
index 6724ab90f82..1619ec15c09 100644
--- a/arch/sparc/kernel/smp.c
+++ b/arch/sparc/kernel/smp.c
@@ -35,13 +35,9 @@
 
 #include "irq.h"
 
-int smp_num_cpus = 1;
 volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
 unsigned char boot_cpu_id = 0;
 unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
-int smp_activated = 0;
-volatile int __cpu_number_map[NR_CPUS];
-volatile int __cpu_logical_map[NR_CPUS];
 
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
@@ -55,9 +51,6 @@ cpumask_t smp_commenced_mask = CPU_MASK_NONE;
  * instruction which is much better...
  */
 
-/* Used to make bitops atomic */
-unsigned char bitops_spinlock = 0;
-
 void __cpuinit smp_store_cpu_info(int id)
 {
 	int cpu_node;
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index c6ac9fc5256..340fc395fe2 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -68,7 +68,8 @@ unsigned char *interrupt_enable = NULL;
 
 static int sun4c_pil_map[] = { 0, 1, 2, 3, 5, 7, 8, 9 };
 
-unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
+static unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sun4c_pil_map)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 8ac5661caff..1290b5998f8 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -52,13 +52,13 @@ extern struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 extern int static_irq_count;
 unsigned char cpu_leds[32];
 #ifdef CONFIG_SMP
-unsigned char sbus_tid[32];
+static unsigned char sbus_tid[32];
 #endif
 
 static struct irqaction *irq_action[NR_IRQS];
 extern spinlock_t irq_action_lock;
 
-struct sbus_action {
+static struct sbus_action {
 	struct irqaction *action;
 	/* For SMP this needs to be extended */
 } *sbus_actions;
@@ -267,7 +267,8 @@ unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq)
 		return irq;
 }
 
-unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
+static unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sbus_to_pil)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index dfde77ff084..69596402a50 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -262,8 +262,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-		    unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+			     unsigned long arg2, unsigned long arg3,
+			     unsigned long arg4)
 {
 	if(smp_processors_ready) {
 		register int high = smp_highest_cpu;
@@ -278,7 +279,7 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			register unsigned long a2 asm("i2") = arg2;
 			register unsigned long a3 asm("i3") = arg3;
 			register unsigned long a4 asm("i4") = arg4;
-			register unsigned long a5 asm("i5") = arg5;
+			register unsigned long a5 asm("i5") = 0;
 
 			__asm__ __volatile__(
 				"std %0, [%6]\n\t"
@@ -290,11 +291,10 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			cpumask_t mask;
 			register int i;
 
-			mask = cpumask_of_cpu(hard_smp4d_processor_id());
-			cpus_andnot(mask, cpu_online_map, mask);
+			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
 			for(i = 0; i <= high; i++) {
 				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
@@ -309,12 +309,16 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_in[i])
 					barrier();
 			} while(++i <= high);
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_out[i])
 					barrier();
 			} while(++i <= high);
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index b92d6d2d5b0..94e02de960e 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -154,7 +154,8 @@ static unsigned long irq_mask[] = {
 
 static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
 
-unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint) 
+static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sun4m_pil_map)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
@@ -163,7 +164,7 @@ unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
 	return sun4m_pil_map[sbint] | 0x30;
 }
 
-inline unsigned long sun4m_get_irqmask(unsigned int irq)
+static unsigned long sun4m_get_irqmask(unsigned int irq)
 {
 	unsigned long mask;
     
@@ -281,7 +282,7 @@ static void sun4m_set_udt(int cpu)
 #define TIMER_IRQ  	(OBIO_INTR | 10)
 #define PROFILE_IRQ	(OBIO_INTR | 14)
 
-struct sun4m_timer_regs *sun4m_timers;
+static struct sun4m_timer_regs *sun4m_timers;
 unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
 
 static void sun4m_clear_clock_irq(void)
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index ffb875aacb7..a14a76ac7f3 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -244,8 +244,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-		    unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+			     unsigned long arg2, unsigned long arg3,
+			     unsigned long arg4)
 {
 		register int ncpus = SUN4M_NCPUS;
 		unsigned long flags;
@@ -258,14 +259,14 @@ void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 		ccall_info.arg2 = arg2;
 		ccall_info.arg3 = arg3;
 		ccall_info.arg4 = arg4;
-		ccall_info.arg5 = arg5;
+		ccall_info.arg5 = 0;
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			cpumask_t mask = cpu_online_map;
 			register int i;
 
 			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
 			for(i = 0; i < ncpus; i++) {
 				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
@@ -283,12 +284,16 @@ void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_in[i])
 					barrier();
 			} while(++i < ncpus);
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_out[i])
 					barrier();
 			} while(++i < ncpus);
@@ -344,7 +349,7 @@ static void __init smp_setup_percpu_timer(void)
 		enable_pil_irq(14);
 }
 
-void __init smp4m_blackbox_id(unsigned *addr)
+static void __init smp4m_blackbox_id(unsigned *addr)
 {
 	int rd = *addr & 0x3e000000;
 	int rs1 = rd >> 11;
@@ -354,7 +359,7 @@ void __init smp4m_blackbox_id(unsigned *addr)
 	addr[2] = 0x80082003 | rd | rs1;	/* and reg, 3, reg */
 }
 
-void __init smp4m_blackbox_current(unsigned *addr)
+static void __init smp4m_blackbox_current(unsigned *addr)
 {
 	int rd = *addr & 0x3e000000;
 	int rs1 = rd >> 11;
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index 3c6b49a53ae..4d73421559c 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -97,7 +97,7 @@ asmlinkage int sparc_pipe(struct pt_regs *regs)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error)
 		goto out;
 	regs->u_regs[UREG_I1] = fd[1];
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 5a7c4c8345c..e1b9233b90a 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -80,4 +80,5 @@ sys_call_table:
 /*300*/	.long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 /*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime
+/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 53caacbb398..0762f5db192 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/profile.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/timer.h>
@@ -40,13 +41,12 @@
 #include <asm/sun4paddr.h>
 #include <asm/page.h>
 #include <asm/pcic.h>
-#include <asm/of_device.h>
 #include <asm/irq_regs.h>
 
 #include "irq.h"
 
 DEFINE_SPINLOCK(rtc_lock);
-enum sparc_clock_type sp_clock_typ;
+static enum sparc_clock_type sp_clock_typ;
 DEFINE_SPINLOCK(mostek_lock);
 void __iomem *mstk48t02_regs = NULL;
 static struct mostek48t08 __iomem *mstk48t08_regs = NULL;
@@ -366,7 +366,7 @@ static int __init clock_init(void)
 fs_initcall(clock_init);
 #endif /* !CONFIG_SUN4 */
 
-void __init sbus_time_init(void)
+static void __init sbus_time_init(void)
 {
 
 	BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index 978e9d85949..5d45d5fd8c9 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -1,7 +1,7 @@
 /*
  * arch/sparc/kernel/traps.c
  *
- * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1995, 2008 David S. Miller (davem@davemloft.net)
  * Copyright 2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -11,7 +11,6 @@
 
 #include <linux/sched.h>  /* for jiffies */
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
@@ -33,9 +32,6 @@ struct trap_trace_entry {
 	unsigned long type;
 };
 
-int trap_curbuf = 0;
-struct trap_trace_entry trapbuf[1024];
-
 void syscall_trace_entry(struct pt_regs *regs)
 {
 	printk("%s[%d]: ", current->comm, task_pid_nr(current));
@@ -72,7 +68,7 @@ void sun4d_nmi(struct pt_regs *regs)
 	prom_halt();
 }
 
-void instruction_dump (unsigned long *pc)
+static void instruction_dump(unsigned long *pc)
 {
 	int i;
 	
@@ -119,8 +115,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		      count++ < 30				&&
                       (((unsigned long) rw) >= PAGE_OFFSET)	&&
 		      !(((unsigned long) rw) & 0x7)) {
-			printk("Caller[%08lx]", rw->ins[7]);
-			print_symbol(": %s\n", rw->ins[7]);
+			printk("Caller[%08lx]: %pS\n", rw->ins[7],
+			       (void *) rw->ins[7]);
 			rw = (struct reg_window *)rw->ins[6];
 		}
 	}
@@ -479,10 +475,6 @@ void do_BUG(const char *file, int line)
 
 extern void sparc_cpu_startup(void);
 
-int linux_smp_still_initting;
-unsigned int thiscpus_tbr;
-int thiscpus_mid;
-
 void trap_init(void)
 {
 	extern void thread_info_offsets_are_bolixed_pete(void);
diff --git a/arch/sparc/kernel/wof.S b/arch/sparc/kernel/wof.S
index 4bce38dfe3c..3bbcd8dc9ab 100644
--- a/arch/sparc/kernel/wof.S
+++ b/arch/sparc/kernel/wof.S
@@ -306,7 +306,6 @@ spwin_bad_ustack_from_kernel:
  * As noted above %curptr cannot be touched by this routine at all.
  */
 
-	.globl	spwin_sun4c_stackchk
 spwin_sun4c_stackchk:
 	/* LOCATION: Window to be saved on the stack */
 
diff --git a/arch/sparc/kernel/wuf.S b/arch/sparc/kernel/wuf.S
index 82e5145b0f7..779ff750603 100644
--- a/arch/sparc/kernel/wuf.S
+++ b/arch/sparc/kernel/wuf.S
@@ -243,7 +243,6 @@ fwin_user_finish_up:
 	 */
 
 	.align	4
-	.globl	sun4c_fwin_stackchk
 sun4c_fwin_stackchk:
 	/* LOCATION: Window 'W' */
 
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index 0a3cd8f6cfe..3604c2e8670 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -451,7 +451,7 @@ asmlinkage void do_sun4c_fault(struct pt_regs *regs, int text_fault, int write,
 }
 
 /* This always deals with user addresses. */
-inline void force_user_fault(unsigned long address, int write)
+static void force_user_fault(unsigned long address, int write)
 {
 	struct vm_area_struct *vma;
 	struct task_struct *tsk = current;
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index 7794ecb896e..e103f1bb377 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/vac-ops.h>
@@ -128,7 +129,7 @@ unsigned long calc_highpages(void)
 	return nr;
 }
 
-unsigned long calc_max_low_pfn(void)
+static unsigned long calc_max_low_pfn(void)
 {
 	int i;
 	unsigned long tmp = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
@@ -292,7 +293,7 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
  *
  * We simply copy the 2.4 implementation for now.
  */
-int pgt_cache_water[2] = { 25, 50 };
+static int pgt_cache_water[2] = { 25, 50 };
 
 void check_pgt_cache(void)
 {
@@ -356,8 +357,6 @@ void __init paging_init(void)
 	device_scan();
 }
 
-struct cache_palias *sparc_aliases;
-
 static void __init taint_real_pages(void)
 {
 	int i;
@@ -375,7 +374,7 @@ static void __init taint_real_pages(void)
 	}
 }
 
-void map_high_region(unsigned long start_pfn, unsigned long end_pfn)
+static void map_high_region(unsigned long start_pfn, unsigned long end_pfn)
 {
 	unsigned long tmp;
 
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 23d3291a3e8..ee30462598f 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -50,7 +50,7 @@
 #include <asm/btfixup.h>
 
 enum mbus_module srmmu_modtype;
-unsigned int hwbug_bitmask;
+static unsigned int hwbug_bitmask;
 int vac_cache_size;
 int vac_line_size;
 
@@ -60,7 +60,7 @@ extern unsigned long last_valid_pfn;
 
 extern unsigned long page_kernel;
 
-pgd_t *srmmu_swapper_pg_dir;
+static pgd_t *srmmu_swapper_pg_dir;
 
 #ifdef CONFIG_SMP
 #define FLUSH_BEGIN(mm)
@@ -83,12 +83,12 @@ BTFIXUPDEF_CALL(void, local_flush_page_for_dma, unsigned long)
 char *srmmu_name;
 
 ctxd_t *srmmu_ctx_table_phys;
-ctxd_t *srmmu_context_table;
+static ctxd_t *srmmu_context_table;
 
 int viking_mxcc_present;
 static DEFINE_SPINLOCK(srmmu_context_spinlock);
 
-int is_hypersparc;
+static int is_hypersparc;
 
 /*
  * In general all page table modifications should use the V8 atomic
@@ -112,11 +112,11 @@ static inline int srmmu_device_memory(unsigned long x)
 	return ((x & 0xF0000000) != 0);
 }
 
-int srmmu_cache_pagetables;
+static int srmmu_cache_pagetables;
 
 /* these will be initialized in srmmu_nocache_calcsize() */
-unsigned long srmmu_nocache_size;
-unsigned long srmmu_nocache_end;
+static unsigned long srmmu_nocache_size;
+static unsigned long srmmu_nocache_end;
 
 /* 1 bit <=> 256 bytes of nocache <=> 64 PTEs */
 #define SRMMU_NOCACHE_BITMAP_SHIFT (PAGE_SHIFT - 4)
@@ -324,7 +324,7 @@ static unsigned long __srmmu_get_nocache(int size, int align)
 	return (SRMMU_NOCACHE_VADDR + (offset << SRMMU_NOCACHE_BITMAP_SHIFT));
 }
 
-unsigned inline long srmmu_get_nocache(int size, int align)
+static unsigned long srmmu_get_nocache(int size, int align)
 {
 	unsigned long tmp;
 
@@ -336,7 +336,7 @@ unsigned inline long srmmu_get_nocache(int size, int align)
 	return tmp;
 }
 
-void srmmu_free_nocache(unsigned long vaddr, int size)
+static void srmmu_free_nocache(unsigned long vaddr, int size)
 {
 	int offset;
 
@@ -369,7 +369,8 @@ void srmmu_free_nocache(unsigned long vaddr, int size)
 	bit_map_clear(&srmmu_nocache_map, offset, size);
 }
 
-void srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end);
+static void srmmu_early_allocate_ptable_skeleton(unsigned long start,
+						 unsigned long end);
 
 extern unsigned long probe_memory(void);	/* in fault.c */
 
@@ -377,7 +378,7 @@ extern unsigned long probe_memory(void);	/* in fault.c */
  * Reserve nocache dynamically proportionally to the amount of
  * system RAM. -- Tomas Szepe <szepe@pinerecords.com>, June 2002
  */
-void srmmu_nocache_calcsize(void)
+static void srmmu_nocache_calcsize(void)
 {
 	unsigned long sysmemavail = probe_memory() / 1024;
 	int srmmu_nocache_npages;
@@ -398,7 +399,7 @@ void srmmu_nocache_calcsize(void)
 	srmmu_nocache_end = SRMMU_NOCACHE_VADDR + srmmu_nocache_size;
 }
 
-void __init srmmu_nocache_init(void)
+static void __init srmmu_nocache_init(void)
 {
 	unsigned int bitmap_bits;
 	pgd_t *pgd;
@@ -645,7 +646,7 @@ static void srmmu_unmapiorange(unsigned long virt_addr, unsigned int len)
  * mappings on the kernel stack without any special code as we did
  * need on the sun4c.
  */
-struct thread_info *srmmu_alloc_thread_info(void)
+static struct thread_info *srmmu_alloc_thread_info(void)
 {
 	struct thread_info *ret;
 
@@ -1045,13 +1046,14 @@ extern void hypersparc_setup_blockops(void);
  *       around 8mb mapped for us.
  */
 
-void __init early_pgtable_allocfail(char *type)
+static void __init early_pgtable_allocfail(char *type)
 {
 	prom_printf("inherit_prom_mappings: Cannot alloc kernel %s.\n", type);
 	prom_halt();
 }
 
-void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end)
+static void __init srmmu_early_allocate_ptable_skeleton(unsigned long start,
+							unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1081,7 +1083,8 @@ void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned l
 	}
 }
 
-void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long end)
+static void __init srmmu_allocate_ptable_skeleton(unsigned long start,
+						  unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1116,7 +1119,8 @@ void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long en
  * looking at the prom's page table directly which is what most
  * other OS's do.  Yuck... this is much better.
  */
-void __init srmmu_inherit_prom_mappings(unsigned long start,unsigned long end)
+static void __init srmmu_inherit_prom_mappings(unsigned long start,
+					       unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1348,8 +1352,7 @@ void __init srmmu_paging_init(void)
 		zones_size[ZONE_HIGHMEM] = npages;
 		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-		free_area_init_node(0, &contig_page_data, zones_size,
-				    pfn_base, zholes_size);
+		free_area_init_node(0, zones_size, pfn_base, zholes_size);
 	}
 }
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index 2375fe9dc31..d1782f6368b 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2123,8 +2123,7 @@ void __init sun4c_paging_init(void)
 		zones_size[ZONE_HIGHMEM] = npages;
 		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-		free_area_init_node(0, &contig_page_data, zones_size,
-				    pfn_base, zholes_size);
+		free_area_init_node(0, zones_size, pfn_base, zholes_size);
 	}
 
 	cnt = 0;
diff --git a/arch/sparc/mm/tsunami.S b/arch/sparc/mm/tsunami.S
index db0d6de33a8..4e55e8f7664 100644
--- a/arch/sparc/mm/tsunami.S
+++ b/arch/sparc/mm/tsunami.S
@@ -93,7 +93,6 @@ tsunami_flush_tlb_page_out:
 	ldd	[src + offset + 0x00], t2; \
 	std	t2, [dst + offset + 0x00];
 
-	.globl	tsunami_copy_1page
 tsunami_copy_1page:
 /* NOTE: This routine has to be shorter than 70insns --jj */
 	or	%g0, (PAGE_SIZE >> 8), %g1
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index fca9246470b..36b4b7ab9cf 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -16,6 +16,8 @@ config SPARC64
 	select HAVE_IDE
 	select HAVE_LMB
 	select HAVE_ARCH_KGDB
+	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_ARCH_TRACEHOOK
 
 config GENERIC_TIME
 	bool
@@ -81,6 +83,10 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y
 
+source "init/Kconfig"
+
+menu "Processor type and features"
+
 choice
 	prompt "Kernel page size"
 	default SPARC64_PAGE_SIZE_8KB
@@ -93,19 +99,11 @@ config SPARC64_PAGE_SIZE_8KB
 	  8KB and 64KB work quite well, since SPARC ELF sections
 	  provide for up to 64KB alignment.
 
-	  Therefore, 512KB and 4MB are for expert hackers only.
-
 	  If you don't know what to do, choose 8KB.
 
 config SPARC64_PAGE_SIZE_64KB
 	bool "64KB"
 
-config SPARC64_PAGE_SIZE_512KB
-	bool "512KB"
-
-config SPARC64_PAGE_SIZE_4MB
-	bool "4MB"
-
 endchoice
 
 config SECCOMP
@@ -136,14 +134,10 @@ config HOTPLUG_CPU
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.
 
-source "init/Kconfig"
-
 config GENERIC_HARDIRQS
 	bool
 	default y
 
-menu "General machine setup"
-
 source "kernel/time/Kconfig"
 
 config SMP
@@ -225,11 +219,10 @@ config HUGETLB_PAGE_SIZE_4MB
 	bool "4MB"
 
 config HUGETLB_PAGE_SIZE_512K
-	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB
 	bool "512K"
 
 config HUGETLB_PAGE_SIZE_64K
-	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB
+	depends on !SPARC64_PAGE_SIZE_64KB
 	bool "64K"
 
 endchoice
@@ -238,6 +231,7 @@ endmenu
 
 config NUMA
 	bool "NUMA support"
+	depends on SMP
 
 config NODES_SHIFT
 	int
diff --git a/arch/sparc64/Makefile b/arch/sparc64/Makefile
index 4b8f2b084c2..b785a395b12 100644
--- a/arch/sparc64/Makefile
+++ b/arch/sparc64/Makefile
@@ -9,7 +9,9 @@
 
 CHECKFLAGS	+= -D__sparc__ -D__sparc_v9__ -m64
 
-CPPFLAGS_vmlinux.lds += -Usparc
+# Undefine sparc when processing vmlinux.lds - it is used
+# And teach CPP we are doing 64 bit builds (for this case)
+CPPFLAGS_vmlinux.lds += -m64 -Usparc
 
 LDFLAGS		:= -m elf64_sparc
 
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 76eb832527f..82cab5cc807 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Fri May 16 13:36:07 2008
+# Linux kernel version: 2.6.26
+# Fri Jul 18 00:47:07 2008
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -22,18 +22,6 @@ CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_SPARC64_PAGE_SIZE_8KB=y
-# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
-# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
-# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
-CONFIG_SECCOMP=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_HOTPLUG_CPU=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -105,6 +93,7 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,6 +110,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -136,11 +126,21 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-CONFIG_GENERIC_HARDIRQS=y
 
 #
-# General machine setup
+# Processor type and features
 #
+CONFIG_SPARC64_PAGE_SIZE_8KB=y
+# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
+CONFIG_SECCOMP=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -342,6 +342,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -366,6 +368,7 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_CDROM_PKTCDVD_WCACHE=y
 CONFIG_ATA_OVER_ETH=m
 CONFIG_SUNVDC=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
@@ -379,6 +382,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -429,8 +433,6 @@ CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -504,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SUNESP is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -529,6 +532,10 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -745,7 +752,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_N2RNG=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -759,38 +767,58 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -856,6 +884,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -985,15 +1014,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SUN_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1010,21 +1031,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 CONFIG_SND_ALI5451=m
@@ -1084,37 +1101,14 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# ALSA Sparc devices
-#
+CONFIG_SND_SPARC=y
 # CONFIG_SND_SUN_AMD7930 is not set
 CONFIG_SND_SUN_CS4231=m
 # CONFIG_SND_SUN_DBRI is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
@@ -1167,6 +1161,7 @@ CONFIG_USB_UHCI_HCD=m
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1226,6 +1221,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1420,6 +1416,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1486,6 +1488,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1527,6 +1533,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sparc64/kernel/auxio.c b/arch/sparc64/kernel/auxio.c
index c55f0293eac..dd5c7bf8761 100644
--- a/arch/sparc64/kernel/auxio.c
+++ b/arch/sparc64/kernel/auxio.c
@@ -9,9 +9,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/io.h>
 #include <asm/auxio.h>
 
diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c
index b61b8dfb09c..f2e87d0d7e1 100644
--- a/arch/sparc64/kernel/central.c
+++ b/arch/sparc64/kernel/central.c
@@ -16,8 +16,8 @@
 #include <asm/fhc.h>
 #include <asm/starfire.h>
 
-struct linux_central *central_bus = NULL;
-struct linux_fhc *fhc_list = NULL;
+static struct linux_central *central_bus = NULL;
+static struct linux_fhc *fhc_list = NULL;
 
 #define IS_CENTRAL_FHC(__fhc)	((__fhc) == central_bus->child)
 
@@ -79,9 +79,9 @@ static void adjust_regs(struct linux_prom_registers *regp, int nregs,
 }
 
 /* Apply probed fhc ranges to registers passed, if no ranges return. */
-void apply_fhc_ranges(struct linux_fhc *fhc,
-		      struct linux_prom_registers *regs,
-		      int nregs)
+static void apply_fhc_ranges(struct linux_fhc *fhc,
+			     struct linux_prom_registers *regs,
+			     int nregs)
 {
 	if (fhc->num_fhc_ranges)
 		adjust_regs(regs, nregs, fhc->fhc_ranges,
@@ -89,8 +89,8 @@ void apply_fhc_ranges(struct linux_fhc *fhc,
 }
 
 /* Apply probed central ranges to registers passed, if no ranges return. */
-void apply_central_ranges(struct linux_central *central,
-			  struct linux_prom_registers *regs, int nregs)
+static void apply_central_ranges(struct linux_central *central,
+				 struct linux_prom_registers *regs, int nregs)
 {
 	if (central->num_central_ranges)
 		adjust_regs(regs, nregs, central->central_ranges,
diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c
index c1979482aa9..c831b0a4e66 100644
--- a/arch/sparc64/kernel/compat_audit.c
+++ b/arch/sparc64/kernel/compat_audit.c
@@ -1,4 +1,4 @@
-#include <asm-sparc/unistd.h>
+#include <asm/unistd_32.h>
 
 unsigned sparc32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index edb74f5a118..d0fa5aa3893 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -159,7 +159,7 @@ static void ds_var_data(struct ds_info *dp,
 			struct ds_cap_state *cp,
 			void *buf, int len);
 
-struct ds_cap_state ds_states_template[] = {
+static struct ds_cap_state ds_states_template[] = {
 	{
 		.service_id	= "md-update",
 		.data		= md_update_data,
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index c49d0388b79..60d36d14255 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -14,13 +14,13 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/ebus.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/bpp.h>
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -401,7 +401,7 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de
 	dev->ofdev.node = dp;
 	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
 	dev->ofdev.dev.bus = &ebus_bus_type;
-	sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node);
+	dev_set_name(&dev->ofdev.dev, "ebus[%08x]", dp->node);
 
 	/* Register with core */
 	if (of_device_register(&dev->ofdev) != 0)
@@ -501,7 +501,7 @@ void __init ebus_init(void)
 		ebus->ofdev.node = dp;
 		ebus->ofdev.dev.parent = &pdev->dev;
 		ebus->ofdev.dev.bus = &ebus_bus_type;
-		sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus);
+		dev_set_name(&ebus->ofdev.dev, "ebus%d", num_ebus);
 
 		/* Register with core */
 		if (of_device_register(&ebus->ofdev) != 0)
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
index 32fbab62085..fc294a29289 100644
--- a/arch/sparc64/kernel/entry.h
+++ b/arch/sparc64/kernel/entry.h
@@ -22,8 +22,7 @@ extern void do_notify_resume(struct pt_regs *regs,
 			     unsigned long orig_i0,
 			     unsigned long thread_info_flags);
 
-extern asmlinkage void syscall_trace(struct pt_regs *regs,
-				     int syscall_exit_p);
+extern asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p);
 
 extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
 
diff --git a/arch/sparc64/kernel/hvapi.c b/arch/sparc64/kernel/hvapi.c
index f34f5d6181e..691760b5b01 100644
--- a/arch/sparc64/kernel/hvapi.c
+++ b/arch/sparc64/kernel/hvapi.c
@@ -34,8 +34,12 @@ static struct api_info api_table[] = {
 	{ .group = HV_GRP_LDOM,					},
 	{ .group = HV_GRP_SVC_CHAN,	.flags = FLAG_PRE_API	},
 	{ .group = HV_GRP_NCS,		.flags = FLAG_PRE_API	},
+	{ .group = HV_GRP_RNG,					},
 	{ .group = HV_GRP_NIAG_PERF,	.flags = FLAG_PRE_API	},
 	{ .group = HV_GRP_FIRE_PERF,				},
+	{ .group = HV_GRP_N2_CPU,				},
+	{ .group = HV_GRP_NIU,					},
+	{ .group = HV_GRP_VF_CPU,				},
 	{ .group = HV_GRP_DIAG,		.flags = FLAG_PRE_API	},
 };
 
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index f3575a614fa..53b19c8231a 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -23,7 +23,7 @@
 #define IO_PAGE_SHIFT			13
 #define IO_PAGE_SIZE			(1UL << IO_PAGE_SHIFT)
 #define IO_PAGE_MASK			(~(IO_PAGE_SIZE-1))
-#define IO_PAGE_ALIGN(addr)		(((addr)+IO_PAGE_SIZE-1)&IO_PAGE_MASK)
+#define IO_PAGE_ALIGN(addr)		ALIGN(addr, IO_PAGE_SIZE)
 
 #define IO_TSB_ENTRIES			(128*1024)
 #define IO_TSB_SIZE			(IO_TSB_ENTRIES * 8)
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index b441a26b73b..7495bc77468 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -7,6 +7,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/linkage.h>
 #include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
@@ -621,8 +622,9 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino)
 unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 {
 	struct irq_handler_data *data;
-	struct ino_bucket *bucket;
 	unsigned long hv_err, cookie;
+	struct ino_bucket *bucket;
+	struct irq_desc *desc;
 	unsigned int virt_irq;
 
 	bucket = kzalloc(sizeof(struct ino_bucket), GFP_ATOMIC);
@@ -643,6 +645,13 @@ unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 	if (unlikely(!data))
 		return 0;
 
+	/* In order to make the LDC channel startup sequence easier,
+	 * especially wrt. locking, we do not let request_irq() enable
+	 * the interrupt.
+	 */
+	desc = irq_desc + virt_irq;
+	desc->status |= IRQ_NOAUTOEN;
+
 	set_irq_chip_data(virt_irq, data);
 
 	/* Catch accidental accesses to these things.  IMAP/ICLR handling
@@ -674,10 +683,32 @@ void ack_bad_irq(unsigned int virt_irq)
 	       ino, virt_irq);
 }
 
+void *hardirq_stack[NR_CPUS];
+void *softirq_stack[NR_CPUS];
+
+static __attribute__((always_inline)) void *set_hardirq_stack(void)
+{
+	void *orig_sp, *sp = hardirq_stack[smp_processor_id()];
+
+	__asm__ __volatile__("mov %%sp, %0" : "=r" (orig_sp));
+	if (orig_sp < sp ||
+	    orig_sp > (sp + THREAD_SIZE)) {
+		sp += THREAD_SIZE - 192 - STACK_BIAS;
+		__asm__ __volatile__("mov %0, %%sp" : : "r" (sp));
+	}
+
+	return orig_sp;
+}
+static __attribute__((always_inline)) void restore_hardirq_stack(void *orig_sp)
+{
+	__asm__ __volatile__("mov %0, %%sp" : : "r" (orig_sp));
+}
+
 void handler_irq(int irq, struct pt_regs *regs)
 {
 	unsigned long pstate, bucket_pa;
 	struct pt_regs *old_regs;
+	void *orig_sp;
 
 	clear_softint(1 << irq);
 
@@ -695,6 +726,8 @@ void handler_irq(int irq, struct pt_regs *regs)
 			       "i" (PSTATE_IE)
 			     : "memory");
 
+	orig_sp = set_hardirq_stack();
+
 	while (bucket_pa) {
 		struct irq_desc *desc;
 		unsigned long next_pa;
@@ -711,10 +744,38 @@ void handler_irq(int irq, struct pt_regs *regs)
 		bucket_pa = next_pa;
 	}
 
+	restore_hardirq_stack(orig_sp);
+
 	irq_exit();
 	set_irq_regs(old_regs);
 }
 
+void do_softirq(void)
+{
+	unsigned long flags;
+
+	if (in_interrupt())
+		return;
+
+	local_irq_save(flags);
+
+	if (local_softirq_pending()) {
+		void *orig_sp, *sp = softirq_stack[smp_processor_id()];
+
+		sp += THREAD_SIZE - 192 - STACK_BIAS;
+
+		__asm__ __volatile__("mov %%sp, %0\n\t"
+				     "mov %1, %%sp"
+				     : "=&r" (orig_sp)
+				     : "r" (sp));
+		__do_softirq();
+		__asm__ __volatile__("mov %0, %%sp"
+				     : : "r" (orig_sp));
+	}
+
+	local_irq_restore(flags);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 void fixup_irqs(void)
 {
@@ -732,6 +793,8 @@ void fixup_irqs(void)
 		}
 		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
 	}
+
+	tick_ops->disable_irq();
 }
 #endif
 
@@ -804,7 +867,7 @@ static void kill_prom_timer(void)
 	: "g1", "g2");
 }
 
-void init_irqwork_curcpu(void)
+void notrace init_irqwork_curcpu(void)
 {
 	int cpu = hard_smp_processor_id();
 
@@ -835,7 +898,7 @@ static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type
 	}
 }
 
-void __cpuinit sun4v_register_mondo_queues(int this_cpu)
+void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
 {
 	struct trap_per_cpu *tb = &trap_block[this_cpu];
 
@@ -907,12 +970,18 @@ static void __init sun4v_init_mondo_queues(void)
 		alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
 		alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
 			       tb->nonresum_qmask);
+	}
+}
+
+static void __init init_send_mondo_info(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct trap_per_cpu *tb = &trap_block[cpu];
 
 		init_cpu_send_mondo_info(tb);
 	}
-
-	/* Load up the boot cpu's entries.  */
-	sun4v_register_mondo_queues(hard_smp_processor_id());
 }
 
 static struct irqaction timer_irq_action = {
@@ -941,6 +1010,13 @@ void __init init_IRQ(void)
 	if (tlb_type == hypervisor)
 		sun4v_init_mondo_queues();
 
+	init_send_mondo_info();
+
+	if (tlb_type == hypervisor) {
+		/* Load up the boot cpu's entries.  */
+		sun4v_register_mondo_queues(hard_smp_processor_id());
+	}
+
 	/* We need to clear any IRQ's pending in the soft interrupt
 	 * registers, a spurious one could be left around from the
 	 * PROM timer which we just disabled.
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index f43b5d75535..201a6e547e4 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -478,9 +478,9 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	return 0;
 }
 
-/* Called with kretprobe_lock held.  The value stored in the return
- * address register is actually 2 instructions before where the
- * callee will return to.  Sequences usually look something like this
+/* The value stored in the return address register is actually 2
+ * instructions before where the callee will return to.
+ * Sequences usually look something like this
  *
  *		call	some_function	<--- return register points here
  *		 nop			<--- call delay slot
@@ -512,8 +512,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -553,7 +552,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	regs->tnpc = orig_ret_address + 4;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/sparc64/kernel/kstack.h b/arch/sparc64/kernel/kstack.h
new file mode 100644
index 00000000000..4248d969272
--- /dev/null
+++ b/arch/sparc64/kernel/kstack.h
@@ -0,0 +1,60 @@
+#ifndef _KSTACK_H
+#define _KSTACK_H
+
+#include <linux/thread_info.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+#include <asm/irq.h>
+
+/* SP must be STACK_BIAS adjusted already.  */
+static inline bool kstack_valid(struct thread_info *tp, unsigned long sp)
+{
+	unsigned long base = (unsigned long) tp;
+
+	if (sp >= (base + sizeof(struct thread_info)) &&
+	    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+		return true;
+
+	if (hardirq_stack[tp->cpu]) {
+		base = (unsigned long) hardirq_stack[tp->cpu];
+		if (sp >= base &&
+		    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+			return true;
+		base = (unsigned long) softirq_stack[tp->cpu];
+		if (sp >= base &&
+		    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
+			return true;
+	}
+	return false;
+}
+
+/* Does "regs" point to a valid pt_regs trap frame?  */
+static inline bool kstack_is_trap_frame(struct thread_info *tp, struct pt_regs *regs)
+{
+	unsigned long base = (unsigned long) tp;
+	unsigned long addr = (unsigned long) regs;
+
+	if (addr >= base &&
+	    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+		goto check_magic;
+
+	if (hardirq_stack[tp->cpu]) {
+		base = (unsigned long) hardirq_stack[tp->cpu];
+		if (addr >= base &&
+		    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+			goto check_magic;
+		base = (unsigned long) softirq_stack[tp->cpu];
+		if (addr >= base &&
+		    addr <= (base + THREAD_SIZE - sizeof(*regs)))
+			goto check_magic;
+	}
+	return false;
+
+check_magic:
+	if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC)
+		return true;
+	return false;
+
+}
+
+#endif /* _KSTACK_H */
diff --git a/arch/sparc64/kernel/ldc.c b/arch/sparc64/kernel/ldc.c
index 63969f61028..d68982330f6 100644
--- a/arch/sparc64/kernel/ldc.c
+++ b/arch/sparc64/kernel/ldc.c
@@ -1,6 +1,6 @@
 /* ldc.c: Logical Domain Channel link-layer protocol driver.
  *
- * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
@@ -23,8 +23,8 @@
 
 #define DRV_MODULE_NAME		"ldc"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.0"
-#define DRV_MODULE_RELDATE	"June 25, 2007"
+#define DRV_MODULE_VERSION	"1.1"
+#define DRV_MODULE_RELDATE	"July 22, 2008"
 
 static char version[] __devinitdata =
 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -1235,13 +1235,9 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 	unsigned long hv_err, flags;
 	int err = -EINVAL;
 
-	spin_lock_irqsave(&lp->lock, flags);
-
-	if (!name)
-		goto out_err;
-
-	if (lp->state != LDC_STATE_INIT)
-		goto out_err;
+	if (!name ||
+	    (lp->state != LDC_STATE_INIT))
+		return -EINVAL;
 
 	snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name);
 	snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
@@ -1250,25 +1246,32 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
 			  lp->rx_irq_name, lp);
 	if (err)
-		goto out_err;
+		return err;
 
 	err = request_irq(lp->cfg.tx_irq, ldc_tx,
 			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
 			  lp->tx_irq_name, lp);
-	if (err)
-		goto out_free_rx_irq;
+	if (err) {
+		free_irq(lp->cfg.rx_irq, lp);
+		return err;
+	}
+
 
+	spin_lock_irqsave(&lp->lock, flags);
+
+	enable_irq(lp->cfg.rx_irq);
+	enable_irq(lp->cfg.tx_irq);
 
 	lp->flags |= LDC_FLAG_REGISTERED_IRQS;
 
 	err = -ENODEV;
 	hv_err = sun4v_ldc_tx_qconf(lp->id, 0, 0);
 	if (hv_err)
-		goto out_free_tx_irq;
+		goto out_free_irqs;
 
 	hv_err = sun4v_ldc_tx_qconf(lp->id, lp->tx_ra, lp->tx_num_entries);
 	if (hv_err)
-		goto out_free_tx_irq;
+		goto out_free_irqs;
 
 	hv_err = sun4v_ldc_rx_qconf(lp->id, 0, 0);
 	if (hv_err)
@@ -1304,14 +1307,11 @@ out_unmap_rx:
 out_unmap_tx:
 	sun4v_ldc_tx_qconf(lp->id, 0, 0);
 
-out_free_tx_irq:
+out_free_irqs:
 	lp->flags &= ~LDC_FLAG_REGISTERED_IRQS;
 	free_irq(lp->cfg.tx_irq, lp);
-
-out_free_rx_irq:
 	free_irq(lp->cfg.rx_irq, lp);
 
-out_err:
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	return err;
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index d569f60c24b..100ebd52749 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -56,9 +56,6 @@ struct of_device *of_find_device_by_node(struct device_node *dp)
 EXPORT_SYMBOL(of_find_device_by_node);
 
 #ifdef CONFIG_PCI
-struct bus_type isa_bus_type;
-EXPORT_SYMBOL(isa_bus_type);
-
 struct bus_type ebus_bus_type;
 EXPORT_SYMBOL(ebus_bus_type);
 #endif
@@ -99,7 +96,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(const u32 *addr);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
 };
 
 /*
@@ -159,8 +156,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
 {
+	if (flags)
+		return flags;
 	return IORESOURCE_MEM;
 }
 
@@ -170,7 +169,7 @@ static unsigned int of_bus_default_get_flags(const u32 *addr)
 
 static int of_bus_pci_match(struct device_node *np)
 {
-	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+	if (!strcmp(np->name, "pci")) {
 		const char *model = of_get_property(np, "model", NULL);
 
 		if (model && !strcmp(model, "SUNW,simba"))
@@ -201,7 +200,7 @@ static int of_bus_simba_match(struct device_node *np)
 	/* Treat PCI busses lacking ranges property just like
 	 * simba.
 	 */
-	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+	if (!strcmp(np->name, "pci")) {
 		if (!of_find_property(np, "ranges", NULL))
 			return 1;
 	}
@@ -252,17 +251,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 {
-	unsigned int flags = 0;
 	u32 w = addr[0];
 
+	/* For PCI, we override whatever child busses may have used.  */
+	flags = 0;
 	switch((w >> 24) & 0x03) {
 	case 0x01:
 		flags |= IORESOURCE_IO;
+		break;
+
 	case 0x02: /* 32 bits */
 	case 0x03: /* 64 bits */
 		flags |= IORESOURCE_MEM;
+		break;
 	}
 	if (w & 0x40000000)
 		flags |= IORESOURCE_PREFETCH;
@@ -426,7 +429,7 @@ static int __init use_1to1_mapping(struct device_node *pp)
 	 * it lacks a ranges property, and this will include
 	 * cases like Simba.
 	 */
-	if (!strcmp(pp->type, "pci") || !strcmp(pp->type, "pciex"))
+	if (!strcmp(pp->name, "pci"))
 		return 0;
 
 	return 1;
@@ -481,10 +484,10 @@ static void __init build_device_resources(struct of_device *op,
 		int pna, pns;
 
 		size = of_read_addr(reg + na, ns);
-		flags = bus->get_flags(reg);
-
 		memcpy(addr, reg, na * 4);
 
+		flags = bus->get_flags(addr, 0);
+
 		if (use_1to1_mapping(pp)) {
 			result = of_read_addr(addr, na);
 			goto build_res;
@@ -509,6 +512,8 @@ static void __init build_device_resources(struct of_device *op,
 					       dna, dns, pna))
 				break;
 
+			flags = pbus->get_flags(addr, flags);
+
 			dna = pna;
 			dns = pns;
 			dbus = pbus;
@@ -709,8 +714,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op,
 				break;
 			}
 		} else {
-			if (!strcmp(pp->type, "pci") ||
-			    !strcmp(pp->type, "pciex")) {
+			if (!strcmp(pp->name, "pci")) {
 				unsigned int this_orig_irq = irq;
 
 				irq = pci_irq_swizzle(dp, pp, irq);
@@ -797,9 +801,9 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 	op->dev.parent = parent;
 	op->dev.bus = &of_platform_bus_type;
 	if (!parent)
-		strcpy(op->dev.bus_id, "root");
+		dev_set_name(&op->dev, "root");
 	else
-		sprintf(op->dev.bus_id, "%08x", dp->node);
+		dev_set_name(&op->dev, "%08x", dp->node);
 
 	if (of_device_register(op)) {
 		printk("%s: Could not register of device.\n",
@@ -842,8 +846,6 @@ static int __init of_bus_driver_init(void)
 	err = of_bus_type_init(&of_platform_bus_type, "of");
 #ifdef CONFIG_PCI
 	if (!err)
-		err = of_bus_type_init(&isa_bus_type, "isa");
-	if (!err)
 		err = of_bus_type_init(&ebus_bus_type, "ebus");
 #endif
 #ifdef CONFIG_SBUS
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index d00a3656c28..80dad76f8b8 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->class = class >> 8;
 	dev->revision = class & 0xff;
 
-	sprintf(dev->dev.bus_id, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
 		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
 	if (ofpci_verbose)
@@ -425,7 +425,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->current_state = 4;		/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
 
-	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+	if (!strcmp(node->name, "pci")) {
 		/* a PCI-PCI bridge */
 		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
 		dev->rom_base_reg = PCI_ROM_ADDRESS1;
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
index 19fa621d6a6..09a5ec200c6 100644
--- a/arch/sparc64/kernel/pci_common.c
+++ b/arch/sparc64/kernel/pci_common.c
@@ -8,9 +8,9 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/device.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
diff --git a/arch/sparc64/kernel/pci_msi.c b/arch/sparc64/kernel/pci_msi.c
index db5e8fd8f67..60c71e35021 100644
--- a/arch/sparc64/kernel/pci_msi.c
+++ b/arch/sparc64/kernel/pci_msi.c
@@ -120,9 +120,9 @@ static struct irq_chip msi_irq = {
 	/* XXX affinity XXX */
 };
 
-int sparc64_setup_msi_irq(unsigned int *virt_irq_p,
-			  struct pci_dev *pdev,
-			  struct msi_desc *entry)
+static int sparc64_setup_msi_irq(unsigned int *virt_irq_p,
+				 struct pci_dev *pdev,
+				 struct msi_desc *entry)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	const struct sparc64_msiq_ops *ops = pbm->msi_ops;
@@ -179,8 +179,8 @@ out_err:
 	return err;
 }
 
-void sparc64_teardown_msi_irq(unsigned int virt_irq,
-			      struct pci_dev *pdev)
+static void sparc64_teardown_msi_irq(unsigned int virt_irq,
+				     struct pci_dev *pdev)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	const struct sparc64_msiq_ops *ops = pbm->msi_ops;
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 994dbe0603d..f85b6bebb0b 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -11,12 +11,12 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/iommu.h>
 #include <asm/irq.h>
 #include <asm/starfire.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
@@ -575,7 +575,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 {
 	unsigned long csr_reg, csr, csr_error_bits;
 	irqreturn_t ret = IRQ_NONE;
-	u16 stat;
+	u16 stat, *addr;
 
 	if (is_pbm_a) {
 		csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
@@ -597,7 +597,9 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 			printk("%s: PCI SERR signal asserted.\n", pbm->name);
 		ret = IRQ_HANDLED;
 	}
-	pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+	addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
+					0, PCI_STATUS);
+	pci_config_read16(addr, &stat);
 	if (stat & (PCI_STATUS_PARITY |
 		    PCI_STATUS_SIG_TARGET_ABORT |
 		    PCI_STATUS_REC_TARGET_ABORT |
@@ -605,7 +607,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm
 		    PCI_STATUS_SIG_SYSTEM_ERROR)) {
 		printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
 		       pbm->name, stat);
-		pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+		pci_config_write16(addr, 0xffff);
 		ret = IRQ_HANDLED;
 	}
 	return ret;
@@ -744,16 +746,16 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 	 * the second will just error out since we do not pass in
 	 * IRQF_SHARED.
 	 */
-	err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+	err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
 			  "PSYCHO_UE", pbm);
-	err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+	err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
 			  "PSYCHO_CE", pbm);
 
 	/* This one, however, ought not to fail.  We can just warn
 	 * about it since the system can still operate properly even
 	 * if this fails.
 	 */
-	err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+	err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
 			  "PSYCHO_PCIERR", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Could not register PCIERR, "
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 4c34195baf3..ade5184e75d 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/apb.h>
 #include <asm/iommu.h>
@@ -18,7 +19,6 @@
 #include <asm/smp.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #include "pci_impl.h"
 #include "iommu_common.h"
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index 615edd9c8e2..9248c6737f0 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -9,13 +9,13 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_device.h>
 
 #include <asm/iommu.h>
 #include <asm/irq.h>
 #include <asm/upa.h>
 #include <asm/pstate.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 
 #include "pci_impl.h"
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index e2bb9790039..a104c80d319 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -531,7 +531,7 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 	/* Nothing to do... */
 }
 
-const struct dma_ops sun4v_dma_ops = {
+static const struct dma_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
 	.map_single			= dma_4v_map_single,
diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c
index eae8ca2a6ba..3bb987a6d03 100644
--- a/arch/sparc64/kernel/power.c
+++ b/arch/sparc64/kernel/power.c
@@ -13,11 +13,11 @@
 #include <linux/pm.h>
 #include <linux/syscalls.h>
 #include <linux/reboot.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/auxio.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/io.h>
 #include <asm/sstate.h>
 #include <asm/reboot.h>
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 2084f81a76e..15f4178592e 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
@@ -53,7 +52,7 @@
 #include <asm/irq_regs.h>
 #include <asm/smp.h>
 
-/* #define VERBOSE_SHOWREGS */
+#include "kstack.h"
 
 static void sparc64_yield(int cpu)
 {
@@ -97,7 +96,7 @@ void cpu_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while(1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 
 		while (!need_resched() && !cpu_is_offline(cpu))
 			sparc64_yield(cpu);
@@ -211,28 +210,14 @@ static void show_regwindow(struct pt_regs *regs)
 	printk("i4: %016lx i5: %016lx i6: %016lx i7: %016lx\n",
 	       rwk->ins[4], rwk->ins[5], rwk->ins[6], rwk->ins[7]);
 	if (regs->tstate & TSTATE_PRIV)
-		print_symbol("I7: <%s>\n", rwk->ins[7]);
+		printk("I7: <%pS>\n", (void *) rwk->ins[7]);
 }
 
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(regdump_lock);
-#endif
-
-void __show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
-#ifdef CONFIG_SMP
-	unsigned long flags;
-
-	/* Protect against xcall ipis which might lead to livelock on the lock */
-	__asm__ __volatile__("rdpr      %%pstate, %0\n\t"
-			     "wrpr      %0, %1, %%pstate"
-			     : "=r" (flags)
-			     : "i" (PSTATE_IE));
-	spin_lock(&regdump_lock);
-#endif
 	printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x    %s\n", regs->tstate,
 	       regs->tpc, regs->tnpc, regs->y, print_tainted());
-	print_symbol("TPC: <%s>\n", regs->tpc);
+	printk("TPC: <%pS>\n", (void *) regs->tpc);
 	printk("g0: %016lx g1: %016lx g2: %016lx g3: %016lx\n",
 	       regs->u_regs[0], regs->u_regs[1], regs->u_regs[2],
 	       regs->u_regs[3]);
@@ -245,63 +230,10 @@ void __show_regs(struct pt_regs * regs)
 	printk("o4: %016lx o5: %016lx sp: %016lx ret_pc: %016lx\n",
 	       regs->u_regs[12], regs->u_regs[13], regs->u_regs[14],
 	       regs->u_regs[15]);
-	print_symbol("RPC: <%s>\n", regs->u_regs[15]);
+	printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
 	show_regwindow(regs);
-#ifdef CONFIG_SMP
-	spin_unlock(&regdump_lock);
-	__asm__ __volatile__("wrpr	%0, 0, %%pstate"
-			     : : "r" (flags));
-#endif
-}
-
-#ifdef VERBOSE_SHOWREGS
-static void idump_from_user (unsigned int *pc)
-{
-	int i;
-	int code;
-	
-	if((((unsigned long) pc) & 3))
-		return;
-	
-	pc -= 3;
-	for(i = -3; i < 6; i++) {
-		get_user(code, pc);
-		printk("%c%08x%c",i?' ':'<',code,i?' ':'>');
-		pc++;
-	}
-	printk("\n");
-}
-#endif
-
-void show_regs(struct pt_regs *regs)
-{
-#ifdef VERBOSE_SHOWREGS
-	extern long etrap, etraptl1;
-#endif
-	__show_regs(regs);
-#if 0
-#ifdef CONFIG_SMP
-	{
-		extern void smp_report_regs(void);
-
-		smp_report_regs();
-	}
-#endif
-#endif
-
-#ifdef VERBOSE_SHOWREGS	
-	if (regs->tpc >= &etrap && regs->tpc < &etraptl1 &&
-	    regs->u_regs[14] >= (long)current - PAGE_SIZE &&
-	    regs->u_regs[14] < (long)current + 6 * PAGE_SIZE) {
-		printk ("*********parent**********\n");
-		__show_regs((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF));
-		idump_from_user(((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF))->tpc);
-		printk ("*********endpar**********\n");
-	}
-#endif
 }
 
-#ifdef CONFIG_MAGIC_SYSRQ
 struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
 static DEFINE_SPINLOCK(global_reg_snapshot_lock);
 
@@ -316,14 +248,22 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
 	global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7];
 
 	if (regs->tstate & TSTATE_PRIV) {
+		struct thread_info *tp = current_thread_info();
 		struct reg_window *rw;
 
 		rw = (struct reg_window *)
 			(regs->u_regs[UREG_FP] + STACK_BIAS);
-		global_reg_snapshot[this_cpu].i7 = rw->ins[6];
-	} else
+		if (kstack_valid(tp, (unsigned long) rw)) {
+			global_reg_snapshot[this_cpu].i7 = rw->ins[7];
+			rw = (struct reg_window *)
+				(rw->ins[6] + STACK_BIAS);
+			if (kstack_valid(tp, (unsigned long) rw))
+				global_reg_snapshot[this_cpu].rpc = rw->ins[7];
+		}
+	} else {
 		global_reg_snapshot[this_cpu].i7 = 0;
-
+		global_reg_snapshot[this_cpu].rpc = 0;
+	}
 	global_reg_snapshot[this_cpu].thread = tp;
 }
 
@@ -342,13 +282,10 @@ static void __global_reg_poll(struct global_reg_snapshot *gp)
 	}
 }
 
-static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+void __trigger_all_cpu_backtrace(void)
 {
 	struct thread_info *tp = current_thread_info();
 	struct pt_regs *regs = get_irq_regs();
-#ifdef CONFIG_KALLSYMS
-	char buffer[KSYM_SYMBOL_LEN];
-#endif
 	unsigned long flags;
 	int this_cpu, cpu;
 
@@ -377,19 +314,16 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 		       gp->tstate, gp->tpc, gp->tnpc,
 		       ((tp && tp->task) ? tp->task->comm : "NULL"),
 		       ((tp && tp->task) ? tp->task->pid : -1));
-#ifdef CONFIG_KALLSYMS
+
 		if (gp->tstate & TSTATE_PRIV) {
-			sprint_symbol(buffer, gp->tpc);
-			printk("             TPC[%s] ", buffer);
-			sprint_symbol(buffer, gp->o7);
-			printk("O7[%s] ", buffer);
-			sprint_symbol(buffer, gp->i7);
-			printk("I7[%s]\n", buffer);
-		} else
-#endif
-		{
-			printk("             TPC[%lx] O7[%lx] I7[%lx]\n",
-			       gp->tpc, gp->o7, gp->i7);
+			printk("             TPC[%pS] O7[%pS] I7[%pS] RPC[%pS]\n",
+			       (void *) gp->tpc,
+			       (void *) gp->o7,
+			       (void *) gp->i7,
+			       (void *) gp->rpc);
+		} else {
+			printk("             TPC[%lx] O7[%lx] I7[%lx] RPC[%lx]\n",
+			       gp->tpc, gp->o7, gp->i7, gp->rpc);
 		}
 	}
 
@@ -398,6 +332,13 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 	spin_unlock_irqrestore(&global_reg_snapshot_lock, flags);
 }
 
+#ifdef CONFIG_MAGIC_SYSRQ
+
+static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+{
+	__trigger_all_cpu_backtrace();
+}
+
 static struct sysrq_key_op sparc_globalreg_op = {
 	.handler	= sysrq_handle_globreg,
 	.help_msg	= "Globalregs",
@@ -691,9 +632,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 		  ((unsigned long) child_sf) - STACK_BIAS;
 
 		/* Special case, if we are spawning a kernel thread from
-		 * a userspace task (via KMOD, NFS, or similar) we must
-		 * disable performance counters in the child because the
-		 * address space and protection realm are changing.
+		 * a userspace task (usermode helper, NFS or similar), we
+		 * must disable performance counters in the child because
+		 * the address space and protection realm are changing.
 		 */
 		if (t->flags & _TIF_PERFCTR) {
 			t->user_cntd0 = t->user_cntd1 = NULL;
@@ -876,7 +817,7 @@ out:
 unsigned long get_wchan(struct task_struct *task)
 {
 	unsigned long pc, fp, bias = 0;
-	unsigned long thread_info_base;
+	struct thread_info *tp;
 	struct reg_window *rw;
         unsigned long ret = 0;
 	int count = 0; 
@@ -885,14 +826,12 @@ unsigned long get_wchan(struct task_struct *task)
             task->state == TASK_RUNNING)
 		goto out;
 
-	thread_info_base = (unsigned long) task_stack_page(task);
+	tp = task_thread_info(task);
 	bias = STACK_BIAS;
 	fp = task_thread_info(task)->ksp + bias;
 
 	do {
-		/* Bogus frame pointer? */
-		if (fp < (thread_info_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_info_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 		rw = (struct reg_window *) fp;
 		pc = rw->ins[7];
diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
index ed03a18d3b3..7151513f156 100644
--- a/arch/sparc64/kernel/prom.c
+++ b/arch/sparc64/kernel/prom.c
@@ -21,9 +21,9 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/lmb.h>
+#include <linux/of_device.h>
 
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/oplib.h>
 #include <asm/irq.h>
 #include <asm/asi.h>
@@ -156,55 +156,11 @@ static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
 		return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
 }
 
-#define PSYCHO_IMAP_SCSI	0x1000UL
-#define PSYCHO_IMAP_ETH		0x1008UL
-#define PSYCHO_IMAP_BPP		0x1010UL
-#define PSYCHO_IMAP_AU_REC	0x1018UL
-#define PSYCHO_IMAP_AU_PLAY	0x1020UL
-#define PSYCHO_IMAP_PFAIL	0x1028UL
-#define PSYCHO_IMAP_KMS		0x1030UL
-#define PSYCHO_IMAP_FLPY	0x1038UL
-#define PSYCHO_IMAP_SHW		0x1040UL
-#define PSYCHO_IMAP_KBD		0x1048UL
-#define PSYCHO_IMAP_MS		0x1050UL
-#define PSYCHO_IMAP_SER		0x1058UL
-#define PSYCHO_IMAP_TIM0	0x1060UL
-#define PSYCHO_IMAP_TIM1	0x1068UL
-#define PSYCHO_IMAP_UE		0x1070UL
-#define PSYCHO_IMAP_CE		0x1078UL
-#define PSYCHO_IMAP_A_ERR	0x1080UL
-#define PSYCHO_IMAP_B_ERR	0x1088UL
-#define PSYCHO_IMAP_PMGMT	0x1090UL
-#define PSYCHO_IMAP_GFX		0x1098UL
-#define PSYCHO_IMAP_EUPA	0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/	PSYCHO_IMAP_SCSI,
-/*0x21*/	PSYCHO_IMAP_ETH,
-/*0x22*/	PSYCHO_IMAP_BPP,
-/*0x23*/	PSYCHO_IMAP_AU_REC,
-/*0x24*/	PSYCHO_IMAP_AU_PLAY,
-/*0x25*/	PSYCHO_IMAP_PFAIL,
-/*0x26*/	PSYCHO_IMAP_KMS,
-/*0x27*/	PSYCHO_IMAP_FLPY,
-/*0x28*/	PSYCHO_IMAP_SHW,
-/*0x29*/	PSYCHO_IMAP_KBD,
-/*0x2a*/	PSYCHO_IMAP_MS,
-/*0x2b*/	PSYCHO_IMAP_SER,
-/*0x2c*/	PSYCHO_IMAP_TIM0,
-/*0x2d*/	PSYCHO_IMAP_TIM1,
-/*0x2e*/	PSYCHO_IMAP_UE,
-/*0x2f*/	PSYCHO_IMAP_CE,
-/*0x30*/	PSYCHO_IMAP_A_ERR,
-/*0x31*/	PSYCHO_IMAP_B_ERR,
-/*0x32*/	PSYCHO_IMAP_PMGMT,
-/*0x33*/	PSYCHO_IMAP_GFX,
-/*0x34*/	PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE	0x1000UL
+
 #define PSYCHO_ONBOARD_IRQ_BASE		0x20
-#define PSYCHO_ONBOARD_IRQ_LAST		0x34
 #define psycho_onboard_imap_offset(__ino) \
-	__psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+	(PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
 
 #define PSYCHO_ICLR_A_SLOT0	0x1400UL
 #define PSYCHO_ICLR_SCSI	0x1800UL
@@ -228,10 +184,6 @@ static unsigned int psycho_irq_build(struct device_node *dp,
 		imap_off = psycho_pcislot_imap_offset(ino);
 	} else {
 		/* Onboard device */
-		if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
-			prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
-			prom_halt();
-		}
 		imap_off = psycho_onboard_imap_offset(ino);
 	}
 
@@ -318,23 +270,6 @@ static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
 
 #define SABRE_IMAP_A_SLOT0	0x0c00UL
 #define SABRE_IMAP_B_SLOT0	0x0c20UL
-#define SABRE_IMAP_SCSI		0x1000UL
-#define SABRE_IMAP_ETH		0x1008UL
-#define SABRE_IMAP_BPP		0x1010UL
-#define SABRE_IMAP_AU_REC	0x1018UL
-#define SABRE_IMAP_AU_PLAY	0x1020UL
-#define SABRE_IMAP_PFAIL	0x1028UL
-#define SABRE_IMAP_KMS		0x1030UL
-#define SABRE_IMAP_FLPY		0x1038UL
-#define SABRE_IMAP_SHW		0x1040UL
-#define SABRE_IMAP_KBD		0x1048UL
-#define SABRE_IMAP_MS		0x1050UL
-#define SABRE_IMAP_SER		0x1058UL
-#define SABRE_IMAP_UE		0x1070UL
-#define SABRE_IMAP_CE		0x1078UL
-#define SABRE_IMAP_PCIERR	0x1080UL
-#define SABRE_IMAP_GFX		0x1098UL
-#define SABRE_IMAP_EUPA		0x10a0UL
 #define SABRE_ICLR_A_SLOT0	0x1400UL
 #define SABRE_ICLR_B_SLOT0	0x1480UL
 #define SABRE_ICLR_SCSI		0x1800UL
@@ -364,33 +299,10 @@ static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
 		return SABRE_IMAP_B_SLOT0 + (slot * 8);
 }
 
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/	SABRE_IMAP_SCSI,
-/*0x21*/	SABRE_IMAP_ETH,
-/*0x22*/	SABRE_IMAP_BPP,
-/*0x23*/	SABRE_IMAP_AU_REC,
-/*0x24*/	SABRE_IMAP_AU_PLAY,
-/*0x25*/	SABRE_IMAP_PFAIL,
-/*0x26*/	SABRE_IMAP_KMS,
-/*0x27*/	SABRE_IMAP_FLPY,
-/*0x28*/	SABRE_IMAP_SHW,
-/*0x29*/	SABRE_IMAP_KBD,
-/*0x2a*/	SABRE_IMAP_MS,
-/*0x2b*/	SABRE_IMAP_SER,
-/*0x2c*/	0 /* reserved */,
-/*0x2d*/	0 /* reserved */,
-/*0x2e*/	SABRE_IMAP_UE,
-/*0x2f*/	SABRE_IMAP_CE,
-/*0x30*/	SABRE_IMAP_PCIERR,
-/*0x31*/	0 /* reserved */,
-/*0x32*/	0 /* reserved */,
-/*0x33*/	SABRE_IMAP_GFX,
-/*0x34*/	SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE		0x20
-#define SABRE_ONBOARD_IRQ_LAST		0x30
+#define SABRE_OBIO_IMAP_BASE	0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE	0x20
 #define sabre_onboard_imap_offset(__ino) \
-	__sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+	(SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
 
 #define sabre_iclr_offset(ino)					      \
 	((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
@@ -453,10 +365,6 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 		imap_off = sabre_pcislot_imap_offset(ino);
 	} else {
 		/* onboard device */
-		if (ino > SABRE_ONBOARD_IRQ_LAST) {
-			prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
-			prom_halt();
-		}
 		imap_off = sabre_onboard_imap_offset(ino);
 	}
 
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f6c9fc92921..10306e476e3 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/audit.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/compat.h>
 #include <linux/elf.h>
 
@@ -442,7 +443,7 @@ static const struct user_regset sparc64_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 36 * sizeof(u64),
+		.n = 36,
 		.size = sizeof(u64), .align = sizeof(u64),
 		.get = genregs64_get, .set = genregs64_set
 	},
@@ -454,7 +455,7 @@ static const struct user_regset sparc64_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 35 * sizeof(u64),
+		.n = 35,
 		.size = sizeof(u64), .align = sizeof(u64),
 		.get = fpregs64_get, .set = fpregs64_set
 	},
@@ -800,7 +801,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
-		.n = 38 * sizeof(u32),
+		.n = 38,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = genregs32_get, .set = genregs32_set
 	},
@@ -816,7 +817,7 @@ static const struct user_regset sparc32_regsets[] = {
 	 */
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = 99 * sizeof(u32),
+		.n = 99,
 		.size = sizeof(u32), .align = sizeof(u32),
 		.get = fpregs32_get, .set = fpregs32_set
 	},
@@ -1049,8 +1050,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
+	int ret = 0;
+
 	/* do the secure computing check first */
 	secure_computing(regs->u_regs[UREG_G1]);
 
@@ -1064,27 +1067,14 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 		audit_syscall_exit(result, regs->u_regs[UREG_I0]);
 	}
 
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (syscall_exit_p)
+			tracehook_report_syscall_exit(regs, 0);
+		else
+			ret = tracehook_report_syscall_entry(regs);
 	}
 
-out:
-	if (unlikely(current->audit_context) && !syscall_exit_p)
+	if (unlikely(current->audit_context) && !syscall_exit_p && !ret)
 		audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
 				     AUDIT_ARCH_SPARC :
 				     AUDIT_ARCH_SPARC64),
@@ -1093,4 +1083,6 @@ out:
 				    regs->u_regs[UREG_I1],
 				    regs->u_regs[UREG_I2],
 				    regs->u_regs[UREG_I3]);
+
+	return ret;
 }
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index c6fc695fe1f..97a993c1f7f 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -46,7 +46,7 @@ __handle_user_windows:
 		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		ldx			[%g6 + TI_FLAGS], %l0
 
-1:		andcc			%l0, _TIF_SIGPENDING, %g0
+1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 		be,pt			%xcc, __handle_user_windows_continue
 		 nop
 		mov			%l5, %o1
@@ -86,7 +86,7 @@ __handle_perfctrs:
 		 wrpr			%g0, RTRAP_PSTATE, %pstate
 		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		ldx			[%g6 + TI_FLAGS], %l0
-1:		andcc			%l0, _TIF_SIGPENDING, %g0
+1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 
 		be,pt			%xcc, __handle_perfctrs_continue
 		 sethi			%hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@ __handle_preemption_continue:
 		 andcc			%l1, %o0, %g0
 		andcc			%l0, _TIF_NEED_RESCHED, %g0
 		bne,pn			%xcc, __handle_preemption
-		 andcc			%l0, _TIF_SIGPENDING, %g0
+		 andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 		bne,pn			%xcc, __handle_signal
 __handle_signal_continue:
 		 ldub			[%g6 + TI_WSAVED], %o2
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 9667e96fd51..ec82d76dc6f 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -2,7 +2,7 @@
  *  arch/sparc64/kernel/signal.c
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
  *  Copyright (C) 1997 Eddie C. Dost   (ecd@skynet.be)
  *  Copyright (C) 1997,1998 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/mm.h>
 #include <linux/tty.h>
@@ -89,7 +90,9 @@ asmlinkage void sparc64_set_context(struct pt_regs *regs)
 	err |= __get_user(regs->u_regs[UREG_G4], (&(*grp)[MC_G4]));
 	err |= __get_user(regs->u_regs[UREG_G5], (&(*grp)[MC_G5]));
 	err |= __get_user(regs->u_regs[UREG_G6], (&(*grp)[MC_G6]));
-	err |= __get_user(regs->u_regs[UREG_G7], (&(*grp)[MC_G7]));
+
+	/* Skip %g7 as that's the thread register in userspace.  */
+
 	err |= __get_user(regs->u_regs[UREG_I0], (&(*grp)[MC_O0]));
 	err |= __get_user(regs->u_regs[UREG_I1], (&(*grp)[MC_O1]));
 	err |= __get_user(regs->u_regs[UREG_I2], (&(*grp)[MC_O2]));
@@ -574,6 +577,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 		 * clear the TS_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
@@ -605,4 +610,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
 {
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs, orig_i0);
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 97cdd1bf4a1..ba5b09ad666 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -19,6 +19,7 @@
 #include <linux/binfmts.h>
 #include <linux/compat.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -794,6 +795,8 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
 		 * clear the TS_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index c099d96f123..2be166c544c 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -80,8 +80,6 @@ void smp_bogo(struct seq_file *m)
 			   i, cpu_data(i).clock_tick);
 }
 
-static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
 extern void setup_sparc64_timer(void);
 
 static volatile unsigned long callin_flag = 0;
@@ -120,9 +118,9 @@ void __cpuinit smp_callin(void)
 	while (!cpu_isset(cpuid, smp_commenced_mask))
 		rmb();
 
-	spin_lock(&call_lock);
+	ipi_call_lock();
 	cpu_set(cpuid, cpu_online_map);
-	spin_unlock(&call_lock);
+	ipi_call_unlock();
 
 	/* idle thread is expected to have preempt disabled */
 	preempt_disable();
@@ -459,27 +457,35 @@ again:
 	}
 }
 
-static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void spitfire_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
+	u64 *mondo, data0, data1, data2;
+	u16 *cpu_list;
 	u64 pstate;
 	int i;
 
 	__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
-	for_each_cpu_mask(i, mask)
-		spitfire_xcall_helper(data0, data1, data2, pstate, i);
+	cpu_list = __va(tb->cpu_list_pa);
+	mondo = __va(tb->cpu_mondo_block_pa);
+	data0 = mondo[0];
+	data1 = mondo[1];
+	data2 = mondo[2];
+	for (i = 0; i < cnt; i++)
+		spitfire_xcall_helper(data0, data1, data2, pstate, cpu_list[i]);
 }
 
 /* Cheetah now allows to send the whole 64-bytes of data in the interrupt
  * packet, but we have no use for that.  However we do take advantage of
  * the new pipelining feature (ie. dispatch to multiple cpus simultaneously).
  */
-static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void cheetah_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	u64 pstate, ver, busy_mask;
 	int nack_busy_id, is_jbus, need_more;
+	u64 *mondo, pstate, ver, busy_mask;
+	u16 *cpu_list;
 
-	if (cpus_empty(mask))
-		return;
+	cpu_list = __va(tb->cpu_list_pa);
+	mondo = __va(tb->cpu_mondo_block_pa);
 
 	/* Unfortunately, someone at Sun had the brilliant idea to make the
 	 * busy/nack fields hard-coded by ITID number for this Ultra-III
@@ -502,7 +508,7 @@ retry:
 			     "stxa	%2, [%5] %6\n\t"
 			     "membar	#Sync\n\t"
 			     : /* no outputs */
-			     : "r" (data0), "r" (data1), "r" (data2),
+			     : "r" (mondo[0]), "r" (mondo[1]), "r" (mondo[2]),
 			       "r" (0x40), "r" (0x50), "r" (0x60),
 			       "i" (ASI_INTR_W));
 
@@ -511,11 +517,16 @@ retry:
 	{
 		int i;
 
-		for_each_cpu_mask(i, mask) {
-			u64 target = (i << 14) | 0x70;
+		for (i = 0; i < cnt; i++) {
+			u64 target, nr;
+
+			nr = cpu_list[i];
+			if (nr == 0xffff)
+				continue;
 
+			target = (nr << 14) | 0x70;
 			if (is_jbus) {
-				busy_mask |= (0x1UL << (i * 2));
+				busy_mask |= (0x1UL << (nr * 2));
 			} else {
 				target |= (nack_busy_id << 24);
 				busy_mask |= (0x1UL <<
@@ -549,11 +560,13 @@ retry:
 				__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
 						     : : "r" (pstate));
 				if (unlikely(need_more)) {
-					int i, cnt = 0;
-					for_each_cpu_mask(i, mask) {
-						cpu_clear(i, mask);
-						cnt++;
-						if (cnt == 32)
+					int i, this_cnt = 0;
+					for (i = 0; i < cnt; i++) {
+						if (cpu_list[i] == 0xffff)
+							continue;
+						cpu_list[i] = 0xffff;
+						this_cnt++;
+						if (this_cnt == 32)
 							break;
 					}
 					goto retry;
@@ -584,16 +597,20 @@ retry:
 			/* Clear out the mask bits for cpus which did not
 			 * NACK us.
 			 */
-			for_each_cpu_mask(i, mask) {
-				u64 check_mask;
+			for (i = 0; i < cnt; i++) {
+				u64 check_mask, nr;
+
+				nr = cpu_list[i];
+				if (nr == 0xffff)
+					continue;
 
 				if (is_jbus)
-					check_mask = (0x2UL << (2*i));
+					check_mask = (0x2UL << (2*nr));
 				else
 					check_mask = (0x2UL <<
 						      this_busy_nack);
 				if ((dispatch_stat & check_mask) == 0)
-					cpu_clear(i, mask);
+					cpu_list[i] = 0xffff;
 				this_busy_nack += 2;
 				if (this_busy_nack == 64)
 					break;
@@ -605,47 +622,17 @@ retry:
 }
 
 /* Multi-cpu list version.  */
-static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	struct trap_per_cpu *tb;
+	int retries, this_cpu, prev_sent, i, saw_cpu_error;
+	unsigned long status;
 	u16 *cpu_list;
-	u64 *mondo;
-	cpumask_t error_mask;
-	unsigned long flags, status;
-	int cnt, retries, this_cpu, prev_sent, i;
-
-	if (cpus_empty(mask))
-		return;
-
-	/* We have to do this whole thing with interrupts fully disabled.
-	 * Otherwise if we send an xcall from interrupt context it will
-	 * corrupt both our mondo block and cpu list state.
-	 *
-	 * One consequence of this is that we cannot use timeout mechanisms
-	 * that depend upon interrupts being delivered locally.  So, for
-	 * example, we cannot sample jiffies and expect it to advance.
-	 *
-	 * Fortunately, udelay() uses %stick/%tick so we can use that.
-	 */
-	local_irq_save(flags);
 
 	this_cpu = smp_processor_id();
-	tb = &trap_block[this_cpu];
-
-	mondo = __va(tb->cpu_mondo_block_pa);
-	mondo[0] = data0;
-	mondo[1] = data1;
-	mondo[2] = data2;
-	wmb();
 
 	cpu_list = __va(tb->cpu_list_pa);
 
-	/* Setup the initial cpu list.  */
-	cnt = 0;
-	for_each_cpu_mask(i, mask)
-		cpu_list[cnt++] = i;
-
-	cpus_clear(error_mask);
+	saw_cpu_error = 0;
 	retries = 0;
 	prev_sent = 0;
 	do {
@@ -690,10 +677,9 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
 					continue;
 
 				err = sun4v_cpu_state(cpu);
-				if (err >= 0 &&
-				    err == HV_CPU_STATE_ERROR) {
+				if (err == HV_CPU_STATE_ERROR) {
+					saw_cpu_error = (cpu + 1);
 					cpu_list[i] = 0xffff;
-					cpu_set(cpu, error_mask);
 				}
 			}
 		} else if (unlikely(status != HV_EWOULDBLOCK))
@@ -717,32 +703,24 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
 		}
 	} while (1);
 
-	local_irq_restore(flags);
-
-	if (unlikely(!cpus_empty(error_mask)))
+	if (unlikely(saw_cpu_error))
 		goto fatal_mondo_cpu_error;
 
 	return;
 
 fatal_mondo_cpu_error:
 	printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus "
-	       "were in error state\n",
-	       this_cpu);
-	printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu);
-	for_each_cpu_mask(i, error_mask)
-		printk("%d ", i);
-	printk("]\n");
+	       "(including %d) were in error state\n",
+	       this_cpu, saw_cpu_error - 1);
 	return;
 
 fatal_mondo_timeout:
-	local_irq_restore(flags);
 	printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward "
 	       " progress after %d retries.\n",
 	       this_cpu, retries);
 	goto dump_cpu_list_and_out;
 
 fatal_mondo_error:
-	local_irq_restore(flags);
 	printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n",
 	       this_cpu, status);
 	printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) "
@@ -756,121 +734,103 @@ dump_cpu_list_and_out:
 	printk("]\n");
 }
 
-/* Send cross call to all processors mentioned in MASK
- * except self.
- */
-static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, cpumask_t mask)
-{
-	u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff));
-	int this_cpu = get_cpu();
-
-	cpus_and(mask, mask, cpu_online_map);
-	cpu_clear(this_cpu, mask);
-
-	if (tlb_type == spitfire)
-		spitfire_xcall_deliver(data0, data1, data2, mask);
-	else if (tlb_type == cheetah || tlb_type == cheetah_plus)
-		cheetah_xcall_deliver(data0, data1, data2, mask);
-	else
-		hypervisor_xcall_deliver(data0, data1, data2, mask);
-	/* NOTE: Caller runs local copy on master. */
+static void (*xcall_deliver_impl)(struct trap_per_cpu *, int);
 
-	put_cpu();
-}
+static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask)
+{
+	struct trap_per_cpu *tb;
+	int this_cpu, i, cnt;
+	unsigned long flags;
+	u16 *cpu_list;
+	u64 *mondo;
 
-extern unsigned long xcall_sync_tick;
+	/* We have to do this whole thing with interrupts fully disabled.
+	 * Otherwise if we send an xcall from interrupt context it will
+	 * corrupt both our mondo block and cpu list state.
+	 *
+	 * One consequence of this is that we cannot use timeout mechanisms
+	 * that depend upon interrupts being delivered locally.  So, for
+	 * example, we cannot sample jiffies and expect it to advance.
+	 *
+	 * Fortunately, udelay() uses %stick/%tick so we can use that.
+	 */
+	local_irq_save(flags);
 
-static void smp_start_sync_tick_client(int cpu)
-{
-	cpumask_t mask = cpumask_of_cpu(cpu);
+	this_cpu = smp_processor_id();
+	tb = &trap_block[this_cpu];
 
-	smp_cross_call_masked(&xcall_sync_tick,
-			      0, 0, 0, mask);
-}
+	mondo = __va(tb->cpu_mondo_block_pa);
+	mondo[0] = data0;
+	mondo[1] = data1;
+	mondo[2] = data2;
+	wmb();
 
-/* Send cross call to all processors except self. */
-#define smp_cross_call(func, ctx, data1, data2) \
-	smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map)
+	cpu_list = __va(tb->cpu_list_pa);
 
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t finished;
-	int wait;
-};
+	/* Setup the initial cpu list.  */
+	cnt = 0;
+	for_each_cpu_mask_nr(i, *mask) {
+		if (i == this_cpu || !cpu_online(i))
+			continue;
+		cpu_list[cnt++] = i;
+	}
 
-static struct call_data_struct *call_data;
+	if (cnt)
+		xcall_deliver_impl(tb, cnt);
 
-extern unsigned long xcall_call_function;
+	local_irq_restore(flags);
+}
 
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
+/* Send cross call to all processors mentioned in MASK_P
+ * except self.  Really, there are only two cases currently,
+ * "&cpu_online_map" and "&mm->cpu_vm_mask".
  */
-static int sparc64_smp_call_function_mask(void (*func)(void *info), void *info,
-					  int wait, cpumask_t mask)
+static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask)
 {
-	struct call_data_struct data;
-	int cpus;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.finished, 0);
-	data.wait = wait;
-
-	spin_lock(&call_lock);
+	u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff));
 
-	cpu_clear(smp_processor_id(), mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		goto out_unlock;
+	xcall_deliver(data0, data1, data2, mask);
+}
 
-	call_data = &data;
-	mb();
+/* Send cross call to all processors except self. */
+static void smp_cross_call(unsigned long *func, u32 ctx, u64 data1, u64 data2)
+{
+	smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map);
+}
 
-	smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask);
+extern unsigned long xcall_sync_tick;
 
-	/* Wait for response */
-	while (atomic_read(&data.finished) != cpus)
-		cpu_relax();
+static void smp_start_sync_tick_client(int cpu)
+{
+	xcall_deliver((u64) &xcall_sync_tick, 0, 0,
+		      &cpumask_of_cpu(cpu));
+}
 
-out_unlock:
-	spin_unlock(&call_lock);
+extern unsigned long xcall_call_function;
 
-	return 0;
+void arch_send_call_function_ipi(cpumask_t mask)
+{
+	xcall_deliver((u64) &xcall_call_function, 0, 0, &mask);
 }
 
-int smp_call_function(void (*func)(void *info), void *info, int wait)
+extern unsigned long xcall_call_function_single;
+
+void arch_send_call_function_single_ipi(int cpu)
 {
-	return sparc64_smp_call_function_mask(func, info, wait, cpu_online_map);
+	xcall_deliver((u64) &xcall_call_function_single, 0, 0,
+		      &cpumask_of_cpu(cpu));
 }
 
 void smp_call_function_client(int irq, struct pt_regs *regs)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
+	clear_softint(1 << irq);
+	generic_smp_call_function_interrupt();
+}
 
+void smp_call_function_single_client(int irq, struct pt_regs *regs)
+{
 	clear_softint(1 << irq);
-	if (call_data->wait) {
-		/* let initiator proceed only after completion */
-		func(info);
-		atomic_inc(&call_data->finished);
-	} else {
-		/* let initiator proceed after getting data */
-		atomic_inc(&call_data->finished);
-		func(info);
-	}
+	generic_smp_call_function_single_interrupt();
 }
 
 static void tsb_sync(void *info)
@@ -890,16 +850,13 @@ static void tsb_sync(void *info)
 
 void smp_tsb_sync(struct mm_struct *mm)
 {
-	sparc64_smp_call_function_mask(tsb_sync, mm, 1, mm->cpu_vm_mask);
+	smp_call_function_mask(mm->cpu_vm_mask, tsb_sync, mm, 1);
 }
 
 extern unsigned long xcall_flush_tlb_mm;
 extern unsigned long xcall_flush_tlb_pending;
 extern unsigned long xcall_flush_tlb_kernel_range;
-extern unsigned long xcall_report_regs;
-#ifdef CONFIG_MAGIC_SYSRQ
 extern unsigned long xcall_fetch_glob_regs;
-#endif
 extern unsigned long xcall_receive_signal;
 extern unsigned long xcall_new_mmu_context_version;
 #ifdef CONFIG_KGDB
@@ -931,7 +888,6 @@ static inline void __local_flush_dcache_page(struct page *page)
 
 void smp_flush_dcache_page_impl(struct page *page, int cpu)
 {
-	cpumask_t mask = cpumask_of_cpu(cpu);
 	int this_cpu;
 
 	if (tlb_type == hypervisor)
@@ -947,29 +903,24 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu)
 		__local_flush_dcache_page(page);
 	} else if (cpu_online(cpu)) {
 		void *pg_addr = page_address(page);
-		u64 data0;
+		u64 data0 = 0;
 
 		if (tlb_type == spitfire) {
-			data0 =
-				((u64)&xcall_flush_dcache_page_spitfire);
+			data0 = ((u64)&xcall_flush_dcache_page_spitfire);
 			if (page_mapping(page) != NULL)
 				data0 |= ((u64)1 << 32);
-			spitfire_xcall_deliver(data0,
-					       __pa(pg_addr),
-					       (u64) pg_addr,
-					       mask);
 		} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
 #ifdef DCACHE_ALIASING_POSSIBLE
-			data0 =
-				((u64)&xcall_flush_dcache_page_cheetah);
-			cheetah_xcall_deliver(data0,
-					      __pa(pg_addr),
-					      0, mask);
+			data0 =	((u64)&xcall_flush_dcache_page_cheetah);
 #endif
 		}
+		if (data0) {
+			xcall_deliver(data0, __pa(pg_addr),
+				      (u64) pg_addr, &cpumask_of_cpu(cpu));
 #ifdef CONFIG_DEBUG_DCFLUSH
-		atomic_inc(&dcpage_flushes_xcall);
+			atomic_inc(&dcpage_flushes_xcall);
 #endif
+		}
 	}
 
 	put_cpu();
@@ -977,66 +928,41 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu)
 
 void flush_dcache_page_all(struct mm_struct *mm, struct page *page)
 {
-	void *pg_addr = page_address(page);
-	cpumask_t mask = cpu_online_map;
-	u64 data0;
+	void *pg_addr;
 	int this_cpu;
+	u64 data0;
 
 	if (tlb_type == hypervisor)
 		return;
 
 	this_cpu = get_cpu();
 
-	cpu_clear(this_cpu, mask);
-
 #ifdef CONFIG_DEBUG_DCFLUSH
 	atomic_inc(&dcpage_flushes);
 #endif
-	if (cpus_empty(mask))
-		goto flush_self;
+	data0 = 0;
+	pg_addr = page_address(page);
 	if (tlb_type == spitfire) {
 		data0 = ((u64)&xcall_flush_dcache_page_spitfire);
 		if (page_mapping(page) != NULL)
 			data0 |= ((u64)1 << 32);
-		spitfire_xcall_deliver(data0,
-				       __pa(pg_addr),
-				       (u64) pg_addr,
-				       mask);
 	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
 #ifdef DCACHE_ALIASING_POSSIBLE
 		data0 = ((u64)&xcall_flush_dcache_page_cheetah);
-		cheetah_xcall_deliver(data0,
-				      __pa(pg_addr),
-				      0, mask);
 #endif
 	}
+	if (data0) {
+		xcall_deliver(data0, __pa(pg_addr),
+			      (u64) pg_addr, &cpu_online_map);
 #ifdef CONFIG_DEBUG_DCFLUSH
-	atomic_inc(&dcpage_flushes_xcall);
+		atomic_inc(&dcpage_flushes_xcall);
 #endif
- flush_self:
+	}
 	__local_flush_dcache_page(page);
 
 	put_cpu();
 }
 
-static void __smp_receive_signal_mask(cpumask_t mask)
-{
-	smp_cross_call_masked(&xcall_receive_signal, 0, 0, 0, mask);
-}
-
-void smp_receive_signal(int cpu)
-{
-	cpumask_t mask = cpumask_of_cpu(cpu);
-
-	if (cpu_online(cpu))
-		__smp_receive_signal_mask(mask);
-}
-
-void smp_receive_signal_client(int irq, struct pt_regs *regs)
-{
-	clear_softint(1 << irq);
-}
-
 void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
 {
 	struct mm_struct *mm;
@@ -1075,17 +1001,10 @@ void kgdb_roundup_cpus(unsigned long flags)
 }
 #endif
 
-void smp_report_regs(void)
-{
-	smp_cross_call(&xcall_report_regs, 0, 0, 0);
-}
-
-#ifdef CONFIG_MAGIC_SYSRQ
 void smp_fetch_global_regs(void)
 {
 	smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0);
 }
-#endif
 
 /* We know that the window frames of the user have been flushed
  * to the stack before we get here because all callers of us
@@ -1142,7 +1061,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm)
 
 	smp_cross_call_masked(&xcall_flush_tlb_mm,
 			      ctx, 0, 0,
-			      mm->cpu_vm_mask);
+			      &mm->cpu_vm_mask);
 
 local_flush_and_out:
 	__flush_tlb_mm(ctx, SECONDARY_CONTEXT);
@@ -1160,7 +1079,7 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 	else
 		smp_cross_call_masked(&xcall_flush_tlb_pending,
 				      ctx, nr, (unsigned long) vaddrs,
-				      mm->cpu_vm_mask);
+				      &mm->cpu_vm_mask);
 
 	__flush_tlb_pending(ctx, nr, vaddrs);
 
@@ -1261,6 +1180,16 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 }
 
+void __init smp_setup_processor_id(void)
+{
+	if (tlb_type == spitfire)
+		xcall_deliver_impl = spitfire_xcall_deliver;
+	else if (tlb_type == cheetah || tlb_type == cheetah_plus)
+		xcall_deliver_impl = cheetah_xcall_deliver;
+	else
+		xcall_deliver_impl = hypervisor_xcall_deliver;
+}
+
 void __devinit smp_fill_in_sib_core_maps(void)
 {
 	unsigned int i;
@@ -1374,10 +1303,6 @@ int __cpu_disable(void)
 	c->core_id = 0;
 	c->proc_id = -1;
 
-	spin_lock(&call_lock);
-	cpu_clear(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
-
 	smp_wmb();
 
 	/* Make sure no interrupts point to this cpu.  */
@@ -1387,6 +1312,10 @@ int __cpu_disable(void)
 	mdelay(1);
 	local_irq_disable();
 
+	ipi_call_lock();
+	cpu_clear(cpu, cpu_online_map);
+	ipi_call_unlock();
+
 	return 0;
 }
 
@@ -1429,7 +1358,13 @@ void __init smp_cpus_done(unsigned int max_cpus)
 
 void smp_send_reschedule(int cpu)
 {
-	smp_receive_signal(cpu);
+	xcall_deliver((u64) &xcall_receive_signal, 0, 0,
+		      &cpumask_of_cpu(cpu));
+}
+
+void smp_receive_signal_client(int irq, struct pt_regs *regs)
+{
+	clear_softint(1 << irq);
 }
 
 /* This is a nop because we capture all other cpus
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 49d3ea50c24..0804f71df6c 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -68,7 +68,6 @@ extern void *__memscan_zero(void *, size_t);
 extern void *__memscan_generic(void *, int, size_t);
 extern int __memcmp(const void *, const void *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);
-extern void show_regs(struct pt_regs *);
 extern void syscall_trace(struct pt_regs *, int);
 extern void sys_sigsuspend(void);
 extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
@@ -108,8 +107,6 @@ EXPORT_SYMBOL(__read_unlock);
 EXPORT_SYMBOL(__write_lock);
 EXPORT_SYMBOL(__write_unlock);
 EXPORT_SYMBOL(__write_trylock);
-
-EXPORT_SYMBOL(smp_call_function);
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_MCOUNT
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index b3e3737750d..4e21d4a57d3 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -5,10 +5,12 @@
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
 
+#include "kstack.h"
+
 void save_stack_trace(struct stack_trace *trace)
 {
-	unsigned long ksp, fp, thread_base;
 	struct thread_info *tp = task_thread_info(current);
+	unsigned long ksp, fp;
 
 	stack_trace_flush();
 
@@ -18,21 +20,18 @@ void save_stack_trace(struct stack_trace *trace)
 	);
 
 	fp = ksp + STACK_BIAS;
-	thread_base = (unsigned long) tp;
 	do {
 		struct sparc_stackf *sf;
 		struct pt_regs *regs;
 		unsigned long pc;
 
-		/* Bogus frame pointer? */
-		if (fp < (thread_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 
 		sf = (struct sparc_stackf *) fp;
 		regs = (struct pt_regs *) (sf + 1);
 
-		if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+		if (kstack_is_trap_frame(tp, regs)) {
 			if (!(regs->tstate & TSTATE_PRIV))
 				break;
 			pc = regs->tpc;
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index ac1bff58c1a..39749e32dc7 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -418,7 +418,7 @@ asmlinkage long sparc_pipe(struct pt_regs *regs)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error)
 		goto out;
 	regs->u_regs[UREG_I1] = fd[1];
@@ -542,7 +542,7 @@ asmlinkage long sparc64_personality(unsigned long personality)
 	return ret;
 }
 
-int sparc64_mmap_check(unsigned long addr, unsigned long len)
+int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
 	if (test_thread_flag(TIF_32BIT)) {
 		if (len >= STACK_TOP32)
@@ -614,9 +614,9 @@ asmlinkage unsigned long sys64_mremap(unsigned long addr,
 		goto out;
 	if (unlikely(new_len >= VA_EXCLUDE_START))
 		goto out;
-	if (unlikely(sparc64_mmap_check(addr, old_len)))
+	if (unlikely(sparc_mmap_check(addr, old_len)))
 		goto out;
-	if (unlikely(sparc64_mmap_check(new_addr, new_len)))
+	if (unlikely(sparc_mmap_check(new_addr, new_len)))
 		goto out;
 
 	down_write(&current->mm->mmap_sem);
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index ba5bd626b39..3d118531baf 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -58,182 +58,6 @@
 #include <asm/mmu_context.h>
 #include <asm/compat_signal.h>
 
-asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group)
-{
-	return sys_chown(filename, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_lchown16(const char __user * filename, u16 user, u16 group)
-{
-	return sys_lchown(filename, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_fchown16(unsigned int fd, u16 user, u16 group)
-{
-	return sys_fchown(fd, low2highuid(user), low2highgid(group));
-}
-
-asmlinkage long sys32_setregid16(u16 rgid, u16 egid)
-{
-	return sys_setregid(low2highgid(rgid), low2highgid(egid));
-}
-
-asmlinkage long sys32_setgid16(u16 gid)
-{
-	return sys_setgid((gid_t)gid);
-}
-
-asmlinkage long sys32_setreuid16(u16 ruid, u16 euid)
-{
-	return sys_setreuid(low2highuid(ruid), low2highuid(euid));
-}
-
-asmlinkage long sys32_setuid16(u16 uid)
-{
-	return sys_setuid((uid_t)uid);
-}
-
-asmlinkage long sys32_setresuid16(u16 ruid, u16 euid, u16 suid)
-{
-	return sys_setresuid(low2highuid(ruid), low2highuid(euid),
-		low2highuid(suid));
-}
-
-asmlinkage long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid)
-{
-	int retval;
-
-	if (!(retval = put_user(high2lowuid(current->uid), ruid)) &&
-	    !(retval = put_user(high2lowuid(current->euid), euid)))
-		retval = put_user(high2lowuid(current->suid), suid);
-
-	return retval;
-}
-
-asmlinkage long sys32_setresgid16(u16 rgid, u16 egid, u16 sgid)
-{
-	return sys_setresgid(low2highgid(rgid), low2highgid(egid),
-		low2highgid(sgid));
-}
-
-asmlinkage long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
-{
-	int retval;
-
-	if (!(retval = put_user(high2lowgid(current->gid), rgid)) &&
-	    !(retval = put_user(high2lowgid(current->egid), egid)))
-		retval = put_user(high2lowgid(current->sgid), sgid);
-
-	return retval;
-}
-
-asmlinkage long sys32_setfsuid16(u16 uid)
-{
-	return sys_setfsuid((uid_t)uid);
-}
-
-asmlinkage long sys32_setfsgid16(u16 gid)
-{
-	return sys_setfsgid((gid_t)gid);
-}
-
-static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)
-{
-	int i;
-	u16 group;
-
-	for (i = 0; i < group_info->ngroups; i++) {
-		group = (u16)GROUP_AT(group_info, i);
-		if (put_user(group, grouplist+i))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int groups16_from_user(struct group_info *group_info, u16 __user *grouplist)
-{
-	int i;
-	u16 group;
-
-	for (i = 0; i < group_info->ngroups; i++) {
-		if (get_user(group, grouplist+i))
-			return  -EFAULT;
-		GROUP_AT(group_info, i) = (gid_t)group;
-	}
-
-	return 0;
-}
-
-asmlinkage long sys32_getgroups16(int gidsetsize, u16 __user *grouplist)
-{
-	int i;
-
-	if (gidsetsize < 0)
-		return -EINVAL;
-
-	get_group_info(current->group_info);
-	i = current->group_info->ngroups;
-	if (gidsetsize) {
-		if (i > gidsetsize) {
-			i = -EINVAL;
-			goto out;
-		}
-		if (groups16_to_user(grouplist, current->group_info)) {
-			i = -EFAULT;
-			goto out;
-		}
-	}
-out:
-	put_group_info(current->group_info);
-	return i;
-}
-
-asmlinkage long sys32_setgroups16(int gidsetsize, u16 __user *grouplist)
-{
-	struct group_info *group_info;
-	int retval;
-
-	if (!capable(CAP_SETGID))
-		return -EPERM;
-	if ((unsigned)gidsetsize > NGROUPS_MAX)
-		return -EINVAL;
-
-	group_info = groups_alloc(gidsetsize);
-	if (!group_info)
-		return -ENOMEM;
-	retval = groups16_from_user(group_info, grouplist);
-	if (retval) {
-		put_group_info(group_info);
-		return retval;
-	}
-
-	retval = set_current_groups(group_info);
-	put_group_info(group_info);
-
-	return retval;
-}
-
-asmlinkage long sys32_getuid16(void)
-{
-	return high2lowuid(current->uid);
-}
-
-asmlinkage long sys32_geteuid16(void)
-{
-	return high2lowuid(current->euid);
-}
-
-asmlinkage long sys32_getgid16(void)
-{
-	return high2lowgid(current->gid);
-}
-
-asmlinkage long sys32_getegid16(void)
-{
-	return high2lowgid(current->egid);
-}
-
 /* 32-bit timeval and related flotsam.  */
 
 static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
@@ -359,7 +183,8 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
 	return err;
 }
 
-int cp_compat_stat64(struct kstat *stat, struct compat_stat64 __user *statbuf)
+static int cp_compat_stat64(struct kstat *stat,
+			    struct compat_stat64 __user *statbuf)
 {
 	int err;
 
@@ -870,9 +695,9 @@ asmlinkage unsigned long sys32_mremap(unsigned long addr,
 	unsigned long ret = -EINVAL;
 	unsigned long new_addr = __new_addr;
 
-	if (unlikely(sparc64_mmap_check(addr, old_len)))
+	if (unlikely(sparc_mmap_check(addr, old_len)))
 		goto out;
-	if (unlikely(sparc64_mmap_check(new_addr, new_len)))
+	if (unlikely(sparc_mmap_check(new_addr, new_len)))
 		goto out;
 	down_write(&current->mm->mmap_sem);
 	ret = do_mremap(addr, old_len, new_len, flags, new_addr);
diff --git a/arch/sparc64/kernel/syscalls.S b/arch/sparc64/kernel/syscalls.S
index db19ed67acf..a2f24270ed8 100644
--- a/arch/sparc64/kernel/syscalls.S
+++ b/arch/sparc64/kernel/syscalls.S
@@ -162,6 +162,8 @@ linux_syscall_trace32:
 	add	%sp, PTREGS_OFF, %o0
 	call	syscall_trace
 	 clr	%o1
+	brnz,pn	%o0, 3f
+	 mov	-ENOSYS, %o0
 	srl	%i0, 0, %o0
 	srl	%i4, 0, %o4
 	srl	%i1, 0, %o1
@@ -173,6 +175,8 @@ linux_syscall_trace:
 	add	%sp, PTREGS_OFF, %o0
 	call	syscall_trace
 	 clr	%o1
+	brnz,pn	%o0, 3f
+	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
 	mov	%i1, %o1
 	mov	%i2, %o2
diff --git a/arch/sparc64/kernel/sysfs.c b/arch/sparc64/kernel/sysfs.c
index e885034a6b7..84e5ce14671 100644
--- a/arch/sparc64/kernel/sysfs.c
+++ b/arch/sparc64/kernel/sysfs.c
@@ -14,7 +14,8 @@
 static DEFINE_PER_CPU(struct hv_mmu_statistics, mmu_stats) __attribute__((aligned(64)));
 
 #define SHOW_MMUSTAT_ULONG(NAME) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+			struct sysdev_attribute *attr, char *buf) \
 { \
 	struct hv_mmu_statistics *p = &per_cpu(mmu_stats, dev->id); \
 	return sprintf(buf, "%lu\n", p->NAME); \
@@ -135,13 +136,16 @@ static unsigned long write_mmustat_enable(unsigned long val)
 	return sun4v_mmustat_conf(ra, &orig_ra);
 }
 
-static ssize_t show_mmustat_enable(struct sys_device *s, char *buf)
+static ssize_t show_mmustat_enable(struct sys_device *s,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long val = run_on_cpu(s->id, read_mmustat_enable, 0);
 	return sprintf(buf, "%lx\n", val);
 }
 
-static ssize_t store_mmustat_enable(struct sys_device *s, const char *buf, size_t count)
+static ssize_t store_mmustat_enable(struct sys_device *s,
+			struct sysdev_attribute *attr, const char *buf,
+			size_t count)
 {
 	unsigned long val, err;
 	int ret = sscanf(buf, "%ld", &val);
@@ -179,14 +183,16 @@ static void unregister_mmu_stats(struct sys_device *s)
 #endif
 
 #define SHOW_CPUDATA_ULONG_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+		struct sysdev_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%lu\n", c->MEMBER); \
 }
 
 #define SHOW_CPUDATA_UINT_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+		struct sysdev_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%u\n", c->MEMBER); \
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 8b5282d433c..0fdbf3ba956 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -20,21 +20,21 @@
 sys_call_table32:
 /*0*/	.word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
-/*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys32_chown16, sys32_mknod
-/*15*/	.word sys_chmod, sys32_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
-/*20*/	.word sys_getpid, sys_capget, sys_capset, sys32_setuid16, sys32_getuid16
+/*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
+/*15*/	.word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
+/*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
 	.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
 /*40*/	.word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
-	.word sys32_umount, sys32_setgid16, sys32_getgid16, sys32_signal, sys32_geteuid16
-/*50*/	.word sys32_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
+	.word sys32_umount, sys_setgid16, sys_getgid16, sys32_signal, sys_geteuid16
+/*50*/	.word sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
 	.word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve
 /*60*/	.word sys32_umask, sys_chroot, compat_sys_newfstat, compat_sys_fstat64, sys_getpagesize
 	.word sys32_msync, sys_vfork, sys32_pread64, sys32_pwrite64, sys_geteuid
 /*70*/	.word sys_getegid, sys_mmap, sys_setreuid, sys_munmap, sys_mprotect
-	.word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys32_getgroups16
-/*80*/	.word sys32_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64
+	.word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys_getgroups16
+/*80*/	.word sys_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64
 	.word sys32_swapon, sys32_getitimer, sys_setuid, sys32_sethostname, sys_setgid
 /*90*/	.word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid
 	.word sys_fsync, sys32_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall
@@ -42,8 +42,8 @@ sys_call_table32:
 	.word compat_sys_rt_sigtimedwait, sys32_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid
 /*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
 	.word sys32_getgroups, sys32_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
-/*120*/	.word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod
-	.word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate
+/*120*/	.word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys_fchown16, sys_fchmod
+	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
 /*130*/	.word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
 	.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
 /*140*/	.word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
@@ -63,7 +63,7 @@ sys_call_table32:
 /*210*/	.word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, compat_sys_sysinfo
 	.word compat_sys_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex
 /*220*/	.word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid
-	.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16
+	.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys_setfsuid16, sys_setfsgid16
 /*230*/	.word sys32_select, compat_sys_time, sys32_splice, compat_sys_stime, compat_sys_statfs64
 	.word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall
 /*240*/	.word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler
@@ -81,7 +81,8 @@ sys_call_table32:
 /*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages, compat_sys_mbind, compat_sys_get_mempolicy
 	.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
-	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime
+	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
 
 #endif /* CONFIG_COMPAT */
 
@@ -154,4 +155,5 @@ sys_call_table:
 /*300*/	.word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-	.word sys_timerfd_settime, sys_timerfd_gettime
+	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index bedc4c159b1..cc16fdcf98a 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -33,6 +33,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
+#include <linux/of_device.h>
 
 #include <asm/oplib.h>
 #include <asm/mostek.h>
@@ -40,7 +41,6 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/starfire.h>
 #include <asm/smp.h>
 #include <asm/sections.h>
@@ -884,6 +884,16 @@ static struct notifier_block sparc64_cpufreq_notifier_block = {
 	.notifier_call	= sparc64_cpufreq_notifier
 };
 
+static int __init register_sparc64_cpufreq_notifier(void)
+{
+
+	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+	return 0;
+}
+
+core_initcall(register_sparc64_cpufreq_notifier);
+
 #endif /* CONFIG_CPU_FREQ */
 
 static int sparc64_next_event(unsigned long delta,
@@ -1050,11 +1060,6 @@ void __init time_init(void)
 	       sparc64_clockevent.mult, sparc64_clockevent.shift);
 
 	setup_sparc64_timer();
-
-#ifdef CONFIG_CPU_FREQ
-	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-#endif
 }
 
 unsigned long long sched_clock(void)
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 36974926265..c824df13f58 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -1,6 +1,6 @@
 /* arch/sparc64/kernel/traps.c
  *
- * Copyright (C) 1995,1997 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -10,8 +10,8 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/linkage.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -37,12 +37,10 @@
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/head.h>
-#ifdef CONFIG_KMOD
-#include <linux/kmod.h>
-#endif
 #include <asm/prom.h>
 
 #include "entry.h"
+#include "kstack.h"
 
 /* When an irrecoverable trap occurs at tl > 0, the trap entry
  * code logs the trap state registers at every level in the trap
@@ -74,7 +72,7 @@ static void dump_tl1_traplog(struct tl1_traplog *p)
 		       i + 1,
 		       p->trapstack[i].tstate, p->trapstack[i].tpc,
 		       p->trapstack[i].tnpc, p->trapstack[i].tt);
-		print_symbol("TRAPLOG: TPC<%s>\n", p->trapstack[i].tpc);
+		printk("TRAPLOG: TPC<%pS>\n", (void *) p->trapstack[i].tpc);
 	}
 }
 
@@ -1081,7 +1079,7 @@ static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *in
 	       regs->tpc, regs->tnpc, regs->u_regs[UREG_I7], regs->tstate);
 	printk("%s" "ERROR(%d): ",
 	       (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id());
-	print_symbol("TPC<%s>\n", regs->tpc);
+	printk("TPC<%pS>\n", (void *) regs->tpc);
 	printk("%s" "ERROR(%d): M_SYND(%lx),  E_SYND(%lx)%s%s\n",
 	       (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(),
 	       (afsr & CHAFSR_M_SYNDROME) >> CHAFSR_M_SYNDROME_SHIFT,
@@ -1689,7 +1687,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs)
 		       smp_processor_id(),
 		       (type & 0x1) ? 'I' : 'D',
 		       regs->tpc);
-		print_symbol(KERN_EMERG "TPC<%s>\n", regs->tpc);
+		printk(KERN_EMERG "TPC<%pS>\n", (void *) regs->tpc);
 		panic("Irrecoverable Cheetah+ parity error.");
 	}
 
@@ -1697,7 +1695,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs)
 	       smp_processor_id(),
 	       (type & 0x1) ? 'I' : 'D',
 	       regs->tpc);
-	print_symbol(KERN_WARNING "TPC<%s>\n", regs->tpc);
+	printk(KERN_WARNING "TPC<%pS>\n", (void *) regs->tpc);
 }
 
 struct sun4v_error_entry {
@@ -1781,7 +1779,7 @@ static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent,
 	       pfx,
 	       ent->err_raddr, ent->err_size, ent->err_cpu);
 
-	__show_regs(regs);
+	show_regs(regs);
 
 	if ((cnt = atomic_read(ocnt)) != 0) {
 		atomic_set(ocnt, 0);
@@ -1904,9 +1902,10 @@ void sun4v_itlb_error_report(struct pt_regs *regs, int tl)
 
 	printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n",
 	       regs->tpc, tl);
-	print_symbol(KERN_EMERG "SUN4V-ITLB: TPC<%s>\n", regs->tpc);
+	printk(KERN_EMERG "SUN4V-ITLB: TPC<%pS>\n", (void *) regs->tpc);
 	printk(KERN_EMERG "SUN4V-ITLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
-	print_symbol(KERN_EMERG "SUN4V-ITLB: O7<%s>\n", regs->u_regs[UREG_I7]);
+	printk(KERN_EMERG "SUN4V-ITLB: O7<%pS>\n",
+	       (void *) regs->u_regs[UREG_I7]);
 	printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] "
 	       "pte[%lx] error[%lx]\n",
 	       sun4v_err_itlb_vaddr, sun4v_err_itlb_ctx,
@@ -1927,9 +1926,10 @@ void sun4v_dtlb_error_report(struct pt_regs *regs, int tl)
 
 	printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n",
 	       regs->tpc, tl);
-	print_symbol(KERN_EMERG "SUN4V-DTLB: TPC<%s>\n", regs->tpc);
+	printk(KERN_EMERG "SUN4V-DTLB: TPC<%pS>\n", (void *) regs->tpc);
 	printk(KERN_EMERG "SUN4V-DTLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
-	print_symbol(KERN_EMERG "SUN4V-DTLB: O7<%s>\n", regs->u_regs[UREG_I7]);
+	printk(KERN_EMERG "SUN4V-DTLB: O7<%pS>\n",
+	       (void *) regs->u_regs[UREG_I7]);
 	printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] "
 	       "pte[%lx] error[%lx]\n",
 	       sun4v_err_dtlb_vaddr, sun4v_err_dtlb_ctx,
@@ -2111,23 +2111,18 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 	fp = ksp + STACK_BIAS;
 	thread_base = (unsigned long) tp;
 
-	printk("Call Trace:");
-#ifdef CONFIG_KALLSYMS
-	printk("\n");
-#endif
+	printk("Call Trace:\n");
 	do {
 		struct sparc_stackf *sf;
 		struct pt_regs *regs;
 		unsigned long pc;
 
-		/* Bogus frame pointer? */
-		if (fp < (thread_base + sizeof(struct thread_info)) ||
-		    fp >= (thread_base + THREAD_SIZE))
+		if (!kstack_valid(tp, fp))
 			break;
 		sf = (struct sparc_stackf *) fp;
 		regs = (struct pt_regs *) (sf + 1);
 
-		if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+		if (kstack_is_trap_frame(tp, regs)) {
 			if (!(regs->tstate & TSTATE_PRIV))
 				break;
 			pc = regs->tpc;
@@ -2137,12 +2132,8 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 			fp = (unsigned long)sf->fp + STACK_BIAS;
 		}
 
-		printk(" [%016lx] ", pc);
-		print_symbol("%s\n", pc);
+		printk(" [%016lx] %pS\n", pc, (void *) pc);
 	} while (++count < 16);
-#ifndef CONFIG_KALLSYMS
-	printk("\n");
-#endif
 }
 
 void dump_stack(void)
@@ -2186,7 +2177,6 @@ static inline struct reg_window *kernel_stack_up(struct reg_window *rw)
 void die_if_kernel(char *str, struct pt_regs *regs)
 {
 	static int die_counter;
-	extern void smp_report_regs(void);
 	int count = 0;
 	
 	/* Amuse the user. */
@@ -2199,7 +2189,7 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 	printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter);
 	notify_die(DIE_OOPS, str, regs, 0, 255, SIGSEGV);
 	__asm__ __volatile__("flushw");
-	__show_regs(regs);
+	show_regs(regs);
 	add_taint(TAINT_DIE);
 	if (regs->tstate & TSTATE_PRIV) {
 		struct reg_window *rw = (struct reg_window *)
@@ -2211,9 +2201,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		while (rw &&
 		       count++ < 30&&
 		       is_kernel_stack(current, rw)) {
-			printk("Caller[%016lx]", rw->ins[7]);
-			print_symbol(": %s", rw->ins[7]);
-			printk("\n");
+			printk("Caller[%016lx]: %pS\n", rw->ins[7],
+			       (void *) rw->ins[7]);
 
 			rw = kernel_stack_up(rw);
 		}
@@ -2225,11 +2214,6 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		}
 		user_instruction_dump ((unsigned int __user *) regs->tpc);
 	}
-#if 0
-#ifdef CONFIG_SMP
-	smp_report_regs();
-#endif
-#endif                                                	
 	if (regs->tstate & TSTATE_PRIV)
 		do_exit(SIGKILL);
 	do_exit(SIGSEGV);
@@ -2470,7 +2454,7 @@ struct trap_per_cpu trap_block[NR_CPUS];
 /* This can get invoked before sched_init() so play it super safe
  * and use hard_smp_processor_id().
  */
-void init_cur_cpu_trap(struct thread_info *t)
+void notrace init_cur_cpu_trap(struct thread_info *t)
 {
 	int cpu = hard_smp_processor_id();
 	struct trap_per_cpu *p = &trap_block[cpu];
diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S
index 450053af039..1ade3d6fb7f 100644
--- a/arch/sparc64/kernel/ttable.S
+++ b/arch/sparc64/kernel/ttable.S
@@ -58,7 +58,12 @@ tl0_irq3:	BTRAP(0x43)
 tl0_irq4:	BTRAP(0x44)
 #endif
 tl0_irq5:	TRAP_IRQ(handler_irq, 5)
-tl0_irq6:	BTRAP(0x46) BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
+#ifdef CONFIG_SMP
+tl0_irq6:	TRAP_IRQ(smp_call_function_single_client, 6)
+#else
+tl0_irq6:	BTRAP(0x46)
+#endif
+tl0_irq7:	BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
 tl0_irq10:	BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
 tl0_irq14:	TRAP_IRQ(timer_interrupt, 14)
 tl0_irq15:	TRAP_IRQ(handler_irq, 15)
diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c
index afa7fc4f519..203ddfad9f2 100644
--- a/arch/sparc64/kernel/unaligned.c
+++ b/arch/sparc64/kernel/unaligned.c
@@ -2,7 +2,7 @@
  * unaligned.c: Unaligned load/store trap handling with special
  *              cases for the kernel to do them more quickly.
  *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  */
 
@@ -20,7 +20,6 @@
 #include <asm/uaccess.h>
 #include <linux/smp.h>
 #include <linux/bitops.h>
-#include <linux/kallsyms.h>
 #include <asm/fpumacro.h>
 
 /* #define DEBUG_MNA */
@@ -289,8 +288,8 @@ static void log_unaligned(struct pt_regs *regs)
 	if (count < 5) {
 		last_time = jiffies;
 		count++;
-		printk("Kernel unaligned access at TPC[%lx] ", regs->tpc);
-		print_symbol("%s\n", regs->tpc);
+		printk("Kernel unaligned access at TPC[%lx] %pS\n",
+		       regs->tpc, (void *) regs->tpc);
 	}
 }
 
diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c
index e78b3517940..a490077891a 100644
--- a/arch/sparc64/kernel/vio.c
+++ b/arch/sparc64/kernel/vio.c
@@ -224,7 +224,7 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	if (!strcmp(type, "domain-services-port"))
 		bus_id_name = "ds";
 
-	if (strlen(bus_id_name) >= KOBJ_NAME_LEN - 4) {
+	if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
 		printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
 		       bus_id_name);
 		return NULL;
@@ -260,16 +260,14 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	vio_fill_channel_info(hp, mp, vdev);
 
 	if (!id) {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s",
-			 bus_id_name);
+		dev_set_name(&vdev->dev, "%s", bus_id_name);
 		vdev->dev_no = ~(u64)0;
 	} else if (!cfg_handle) {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu",
-			 bus_id_name, *id);
+		dev_set_name(&vdev->dev, "%s-%lu", bus_id_name, *id);
 		vdev->dev_no = *id;
 	} else {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu-%lu",
-			 bus_id_name, *cfg_handle, *id);
+		dev_set_name(&vdev->dev, "%s-%lu-%lu", bus_id_name,
+			     *cfg_handle, *id);
 		vdev->dev_no = *cfg_handle;
 	}
 
@@ -292,12 +290,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	}
 	vdev->dp = dp;
 
-	printk(KERN_INFO "VIO: Adding device %s\n", vdev->dev.bus_id);
+	printk(KERN_INFO "VIO: Adding device %s\n", dev_name(&vdev->dev));
 
 	err = device_register(&vdev->dev);
 	if (err) {
 		printk(KERN_ERR "VIO: Could not register device %s, err=%d\n",
-		       vdev->dev.bus_id, err);
+		       dev_name(&vdev->dev), err);
 		kfree(vdev);
 		return NULL;
 	}
@@ -330,7 +328,7 @@ static void vio_remove(struct mdesc_handle *hp, u64 node)
 	dev = device_find_child(&root_vdev->dev, (void *) node,
 				vio_md_node_match);
 	if (dev) {
-		printk(KERN_INFO "VIO: Removing device %s\n", dev->bus_id);
+		printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev));
 
 		device_unregister(dev);
 	}
diff --git a/arch/sparc64/lib/copy_page.S b/arch/sparc64/lib/copy_page.S
index 37460666a5c..b243d3b606b 100644
--- a/arch/sparc64/lib/copy_page.S
+++ b/arch/sparc64/lib/copy_page.S
@@ -25,9 +25,9 @@
 
 #define	DCACHE_SIZE	(PAGE_SIZE * 2)
 
-#if (PAGE_SHIFT == 13) || (PAGE_SHIFT == 19)
+#if (PAGE_SHIFT == 13)
 #define PAGE_SIZE_REM	0x80
-#elif (PAGE_SHIFT == 16) || (PAGE_SHIFT == 22)
+#elif (PAGE_SHIFT == 16)
 #define PAGE_SIZE_REM	0x100
 #else
 #error Wrong PAGE_SHIFT specified
@@ -198,7 +198,7 @@ cheetah_copy_page_insn:
 	cmp		%o2, PAGE_SIZE_REM
 	bne,pt		%xcc, 1b
 	 add		%o0, 0x40, %o0
-#if (PAGE_SHIFT == 16) || (PAGE_SHIFT == 22)
+#if (PAGE_SHIFT == 16)
 	TOUCH(f0, f2, f4, f6, f8, f10, f12, f14)
 	ldda		[%o1] ASI_BLK_P, %f32
 	stda		%f48, [%o0] %asi
diff --git a/arch/sparc64/lib/mcount.S b/arch/sparc64/lib/mcount.S
index 7735a7a6053..fad90ddb3a2 100644
--- a/arch/sparc64/lib/mcount.S
+++ b/arch/sparc64/lib/mcount.S
@@ -48,12 +48,45 @@ mcount:
 	sub		%g3, STACK_BIAS, %g3
 	cmp		%sp, %g3
 	bg,pt		%xcc, 1f
-	 sethi		%hi(panicstring), %g3
+	 nop
+	lduh		[%g6 + TI_CPU], %g1
+	sethi		%hi(hardirq_stack), %g3
+	or		%g3, %lo(hardirq_stack), %g3
+	sllx		%g1, 3, %g1
+	ldx		[%g3 + %g1], %g7
+	sub		%g7, STACK_BIAS, %g7
+	cmp		%sp, %g7
+	bleu,pt		%xcc, 2f
+	 sethi		%hi(THREAD_SIZE), %g3
+	add		%g7, %g3, %g7
+	cmp		%sp, %g7
+	blu,pn		%xcc, 1f
+2:	 sethi		%hi(softirq_stack), %g3
+	or		%g3, %lo(softirq_stack), %g3
+	ldx		[%g3 + %g1], %g7
+	cmp		%sp, %g7
+	bleu,pt		%xcc, 2f
+	 sethi		%hi(THREAD_SIZE), %g3
+	add		%g7, %g3, %g7
+	cmp		%sp, %g7
+	blu,pn		%xcc, 1f
+	 nop
+	/* If we are already on ovstack, don't hop onto it
+	 * again, we are already trying to output the stack overflow
+	 * message.
+	 */
 	sethi		%hi(ovstack), %g7		! cant move to panic stack fast enough
 	 or		%g7, %lo(ovstack), %g7
-	add		%g7, OVSTACKSIZE, %g7
+	add		%g7, OVSTACKSIZE, %g3
+	sub		%g3, STACK_BIAS + 192, %g3
 	sub		%g7, STACK_BIAS, %g7
-	mov		%g7, %sp
+	cmp		%sp, %g7
+	blu,pn		%xcc, 2f
+	 cmp		%sp, %g3
+	bleu,pn		%xcc, 1f
+	 nop
+2:	mov		%g3, %sp
+	sethi		%hi(panicstring), %g3
 	call		prom_printf
 	 or		%g3, %lo(panicstring), %o0
 	call		prom_halt
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index 236f4d228d2..ea7d7ae76bc 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -1,7 +1,7 @@
 /*
  * arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
  *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
  */
 
@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kprobes.h>
-#include <linux/kallsyms.h>
 #include <linux/kdebug.h>
 
 #include <asm/page.h>
@@ -115,7 +114,7 @@ static void bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr)
 	printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n",
 	       regs->tpc);
 	printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]);
-	print_symbol("RPC: <%s>\n", regs->u_regs[15]);
+	printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]);
 	printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr);
 	dump_stack();
 	unhandled_fault(regs->tpc, current, regs);
diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c
index ebefd2a1437..f27d10369e0 100644
--- a/arch/sparc64/mm/hugetlbpage.c
+++ b/arch/sparc64/mm/hugetlbpage.c
@@ -175,7 +175,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
@@ -195,7 +195,8 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 				pgoff, flags);
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -294,6 +295,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 84898c44dd4..a41df7bef03 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -49,6 +49,7 @@
 #include <asm/sstate.h>
 #include <asm/mdesc.h>
 #include <asm/cpudata.h>
+#include <asm/irq.h>
 
 #define MAX_PHYS_ADDRESS	(1UL << 42UL)
 #define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
@@ -392,51 +393,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 	}
 }
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages << (PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long i, flags;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk(KERN_INFO "%lu pages of RAM\n", total);
-	printk(KERN_INFO "%lu reserved pages\n", reserved);
-	printk(KERN_INFO "%lu pages shared\n", shared);
-	printk(KERN_INFO "%lu pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n",
-	       global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-	       global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n",
-	       global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-	       global_page_state(NR_PAGETABLE));
-}
-
 void mmu_info(struct seq_file *m)
 {
 	if (tlb_type == cheetah)
@@ -788,7 +744,6 @@ int numa_cpu_lookup_table[NR_CPUS];
 cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 
 struct mdesc_mblock {
 	u64	base;
@@ -841,6 +796,9 @@ static unsigned long nid_range(unsigned long start, unsigned long end,
 		start += PAGE_SIZE;
 	}
 
+	if (start > end)
+		start = end;
+
 	return start;
 }
 #else
@@ -871,7 +829,7 @@ static void __init allocate_node_data(int nid)
 	NODE_DATA(nid) = __va(paddr);
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 #endif
 
 	p = NODE_DATA(nid);
@@ -1768,8 +1726,7 @@ void __init paging_init(void)
 
 	find_ramdisk(phys_base);
 
-	if (cmdline_memory_size)
-		lmb_enforce_memory_limit(phys_base + cmdline_memory_size);
+	lmb_enforce_memory_limit(cmdline_memory_size);
 
 	lmb_analyze();
 	lmb_dump_all();
@@ -1817,6 +1774,16 @@ void __init paging_init(void)
 	if (tlb_type == hypervisor)
 		sun4v_mdesc_init();
 
+	/* Once the OF device tree and MDESC have been setup, we know
+	 * the list of possible cpus.  Therefore we can allocate the
+	 * IRQ stacks.
+	 */
+	for_each_possible_cpu(i) {
+		/* XXX Use node local allocations... XXX */
+		softirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		hardirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+	}
+
 	/* Setup bootmem... */
 	last_valid_pfn = end_pfn = bootmem_init(phys_base);
 
@@ -1876,7 +1843,7 @@ static int pavail_rescan_ents __initdata;
  * memory list again, and make sure it provides at least as much
  * memory as 'pavail' does.
  */
-static void setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(void)
 {
 	int i;
 
@@ -1996,6 +1963,15 @@ void __init mem_init(void)
 void free_initmem(void)
 {
 	unsigned long addr, initend;
+	int do_free = 1;
+
+	/* If the physical memory maps were trimmed by kernel command
+	 * line options, don't even try freeing this initmem stuff up.
+	 * The kernel image could have been in the trimmed out region
+	 * and if so the freeing below will free invalid page structs.
+	 */
+	if (cmdline_memory_size)
+		do_free = 0;
 
 	/*
 	 * The init section is aligned to 8k in vmlinux.lds. Page align for >8k pagesizes.
@@ -2010,13 +1986,16 @@ void free_initmem(void)
 			((unsigned long) __va(kern_base)) -
 			((unsigned long) KERNBASE));
 		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
-		p = virt_to_page(page);
 
-		ClearPageReserved(p);
-		init_page_count(p);
-		__free_page(p);
-		num_physpages++;
-		totalram_pages++;
+		if (do_free) {
+			p = virt_to_page(page);
+
+			ClearPageReserved(p);
+			init_page_count(p);
+			__free_page(p);
+			num_physpages++;
+			totalram_pages++;
+		}
 	}
 }
 
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index fe70c8a557b..587f8efb2e0 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -1,9 +1,10 @@
 /* arch/sparc64/mm/tsb.c
  *
- * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2006, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
+#include <linux/preempt.h>
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
@@ -96,12 +97,6 @@ void flush_tsb_user(struct mmu_gather *mp)
 #elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
 #define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_64K
 #define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_64K
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB)
-#define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_512K
-#define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_512K
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB)
-#define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_4MB
-#define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_4MB
 #else
 #error Broken base page size setting...
 #endif
@@ -421,7 +416,9 @@ retry_tsb_alloc:
 		tsb_context_switch(mm);
 
 		/* Now force other processors to do the same.  */
+		preempt_disable();
 		smp_tsb_sync(mm);
+		preempt_enable();
 
 		/* Now it is safe to free the old tsb.  */
 		kmem_cache_free(tsb_caches[old_cache_index], old_tsb);
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 9bb2d90a9df..86773e89dc1 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -480,42 +480,6 @@ xcall_sync_tick:
 	b		rtrap_xcall
 	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
 
-	/* NOTE: This is SPECIAL!!  We do etrap/rtrap however
-	 *       we choose to deal with the "BH's run with
-	 *       %pil==15" problem (described in asm/pil.h)
-	 *       by just invoking rtrap directly past where
-	 *       BH's are checked for.
-	 *
-	 *       We do it like this because we do not want %pil==15
-	 *       lockups to prevent regs being reported.
-	 */
-	.globl		xcall_report_regs
-xcall_report_regs:
-
-661:	rdpr		%pstate, %g2
-	wrpr		%g2, PSTATE_IG | PSTATE_AG, %pstate
-	.section	.sun4v_2insn_patch, "ax"
-	.word		661b
-	nop
-	nop
-	.previous
-
-	rdpr		%pil, %g2
-	wrpr		%g0, 15, %pil
-	sethi		%hi(109f), %g7
-	b,pt		%xcc, etrap_irq
-109:	 or		%g7, %lo(109b), %g7
-#ifdef CONFIG_TRACE_IRQFLAGS
-	call		trace_hardirqs_off
-	 nop
-#endif
-	call		__show_regs
-	 add		%sp, PTREGS_OFF, %o0
-	/* Has to be a non-v9 branch due to the large distance. */
-	b		rtrap_xcall
-	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
-
-#ifdef CONFIG_MAGIC_SYSRQ
 	.globl		xcall_fetch_glob_regs
 xcall_fetch_glob_regs:
 	sethi		%hi(global_reg_snapshot), %g1
@@ -531,6 +495,13 @@ xcall_fetch_glob_regs:
 	stx		%g7, [%g1 + GR_SNAP_TNPC]
 	stx		%o7, [%g1 + GR_SNAP_O7]
 	stx		%i7, [%g1 + GR_SNAP_I7]
+	/* Don't try this at home kids... */
+	rdpr		%cwp, %g2
+	sub		%g2, 1, %g7
+	wrpr		%g7, %cwp
+	mov		%i7, %g7
+	wrpr		%g2, %cwp
+	stx		%g7, [%g1 + GR_SNAP_RPC]
 	sethi		%hi(trap_block), %g7
 	or		%g7, %lo(trap_block), %g7
 	sllx		%g2, TRAP_BLOCK_SZ_SHIFT, %g2
@@ -539,7 +510,6 @@ xcall_fetch_glob_regs:
 	membar		#StoreStore
 	stx		%g3, [%g1 + GR_SNAP_THREAD]
 	retry
-#endif /* CONFIG_MAGIC_SYSRQ */
 
 #ifdef DCACHE_ALIASING_POSSIBLE
 	.align		32
@@ -688,6 +658,11 @@ xcall_call_function:
 	wr		%g0, (1 << PIL_SMP_CALL_FUNC), %set_softint
 	retry
 
+	.globl		xcall_call_function_single
+xcall_call_function_single:
+	wr		%g0, (1 << PIL_SMP_CALL_FUNC_SNGL), %set_softint
+	retry
+
 	.globl		xcall_receive_signal
 xcall_receive_signal:
 	wr		%g0, (1 << PIL_SMP_RECEIVE_SIGNAL), %set_softint
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 5047490fc29..d741f35d7b3 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -362,19 +362,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
 	if (tty == NULL)
 		return IRQ_NONE;
 
-	if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
-	   (tty->ldisc.write_wakeup != NULL))
-		(tty->ldisc.write_wakeup)(tty);
-
-	/*
-	 * BLOCKING mode
-	 * In blocking mode, everything sleeps on tty->write_wait.
-	 * Sleeping in the console driver would break non-blocking
-	 * writes.
-	 */
-
-	if (waitqueue_active(&tty->write_wait))
-		wake_up_interruptible(&tty->write_wait);
+	tty_wakeup(tty);
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/um/include/init.h b/arch/um/include/init.h
index b00a95741d4..37dd097c16c 100644
--- a/arch/um/include/init.h
+++ b/arch/um/include/init.h
@@ -45,6 +45,8 @@ typedef void (*exitcall_t)(void);
 # define __section(S) __attribute__ ((__section__(#S)))
 #endif
 
+#if __GNUC__ == 3
+
 #if __GNUC_MINOR__ >= 3
 # define __used			__attribute__((__used__))
 #else
@@ -52,6 +54,12 @@ typedef void (*exitcall_t)(void);
 #endif
 
 #else
+#if __GNUC__ == 4
+# define __used			__attribute__((__used__))
+#endif
+#endif
+
+#else
 #include <linux/compiler.h>
 #endif
 /* These are for everybody (although not all archs will actually
diff --git a/arch/um/include/irq_kern.h b/arch/um/include/irq_kern.h
index 4f775597fd5..fba3895274f 100644
--- a/arch/um/include/irq_kern.h
+++ b/arch/um/include/irq_kern.h
@@ -13,8 +13,6 @@ extern int um_request_irq(unsigned int irq, int fd, int type,
 			  irq_handler_t handler,
 			  unsigned long irqflags,  const char * devname,
 			  void *dev_id);
-extern int init_aio_irq(int irq, char *name,
-			irq_handler_t handler);
 
 #endif
 
diff --git a/arch/um/include/irq_user.h b/arch/um/include/irq_user.h
index e60b31873de..c6c784df267 100644
--- a/arch/um/include/irq_user.h
+++ b/arch/um/include/irq_user.h
@@ -21,8 +21,6 @@ struct irq_fd {
 enum { IRQ_READ, IRQ_WRITE };
 
 extern void sigio_handler(int sig, struct uml_pt_regs *regs);
-extern int activate_fd(int irq, int fd, int type, void *dev_id);
-extern void free_irq_by_irq_and_dev(unsigned int irq, void *dev_id);
 extern void free_irq_by_fd(int fd);
 extern void reactivate_fd(int fd, int irqnum);
 extern void deactivate_fd(int fd, int irqnum);
diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h
index b073f8a86bd..64d2c744330 100644
--- a/arch/um/include/skas/skas.h
+++ b/arch/um/include/skas/skas.h
@@ -16,7 +16,6 @@ extern int user_thread(unsigned long stack, int flags);
 extern void new_thread_handler(void);
 extern void handle_syscall(struct uml_pt_regs *regs);
 extern int new_mm(unsigned long stack);
-extern void get_skas_faultinfo(int pid, struct faultinfo * fi);
 extern long execute_syscall_skas(void *r);
 extern unsigned long current_stub_stack(void);
 
diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h
index 2b6fc8e0f07..45c04999d67 100644
--- a/arch/um/include/um_uaccess.h
+++ b/arch/um/include/um_uaccess.h
@@ -34,7 +34,6 @@ extern int copy_to_user(void __user *to, const void *from, int n);
 
 extern int __do_copy_to_user(void *to, const void *from, int n,
 			     void **fault_addr, jmp_buf **fault_catcher);
-extern void __do_copy(void *to, const void *from, int n);
 
 /*
  * strncpy_from_user: - Copy a NUL terminated string from userspace.
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 91587f8db34..3d7aad09b17 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -102,7 +102,7 @@ void sigio_handler(int sig, struct uml_pt_regs *regs)
 
 static DEFINE_SPINLOCK(irq_lock);
 
-int activate_fd(int irq, int fd, int type, void *dev_id)
+static int activate_fd(int irq, int fd, int type, void *dev_id)
 {
 	struct pollfd *tmp_pfd;
 	struct irq_fd *new_fd, *irq_fd;
@@ -216,7 +216,7 @@ static int same_irq_and_dev(struct irq_fd *irq, void *d)
 	return ((irq->irq == data->irq) && (irq->id == data->dev));
 }
 
-void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
+static void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
 {
 	struct irq_and_dev data = ((struct irq_and_dev) { .irq  = irq,
 							  .dev  = dev });
@@ -403,37 +403,6 @@ void __init init_IRQ(void)
 	}
 }
 
-int init_aio_irq(int irq, char *name, irq_handler_t handler)
-{
-	int fds[2], err;
-
-	err = os_pipe(fds, 1, 1);
-	if (err) {
-		printk(KERN_ERR "init_aio_irq - os_pipe failed, err = %d\n",
-		       -err);
-		goto out;
-	}
-
-	err = um_request_irq(irq, fds[0], IRQ_READ, handler,
-			     IRQF_DISABLED | IRQF_SAMPLE_RANDOM, name,
-			     (void *) (long) fds[0]);
-	if (err) {
-		printk(KERN_ERR "init_aio_irq - : um_request_irq failed, "
-		       "err = %d\n",
-		       err);
-		goto out_close;
-	}
-
-	err = fds[1];
-	goto out;
-
- out_close:
-	os_close_file(fds[0]);
-	os_close_file(fds[1]);
- out:
-	return err;
-}
-
 /*
  * IRQ stack entry and exit:
  *
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index ccc02a616c2..836fc9b9470 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -18,7 +18,6 @@ EXPORT_SYMBOL(get_signals);
 EXPORT_SYMBOL(kernel_thread);
 EXPORT_SYMBOL(sys_waitpid);
 EXPORT_SYMBOL(flush_tlb_range);
-EXPORT_SYMBOL(arch_validate);
 
 EXPORT_SYMBOL(high_physmem);
 EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index b0ee64622ff..61d7e6138ff 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -21,7 +21,7 @@
 /* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
 unsigned long *empty_zero_page = NULL;
 /* allocated in paging_init and unchanged thereafter */
-unsigned long *empty_bad_page = NULL;
+static unsigned long *empty_bad_page = NULL;
 
 /*
  * Initialized during boot, and readonly for initializing page tables
@@ -240,37 +240,6 @@ void __init paging_init(void)
 #endif
 }
 
-struct page *arch_validate(struct page *page, gfp_t mask, int order)
-{
-	unsigned long addr, zero = 0;
-	int i;
-
- again:
-	if (page == NULL)
-		return page;
-	if (PageHighMem(page))
-		return page;
-
-	addr = (unsigned long) page_address(page);
-	for (i = 0; i < (1 << order); i++) {
-		current->thread.fault_addr = (void *) addr;
-		if (__do_copy_to_user((void __user *) addr, &zero,
-				     sizeof(zero),
-				     &current->thread.fault_addr,
-				     &current->thread.fault_catcher)) {
-			if (!(mask & __GFP_WAIT))
-				return NULL;
-			else break;
-		}
-		addr += PAGE_SIZE;
-	}
-
-	if (i == (1 << order))
-		return page;
-	page = alloc_pages(mask, order);
-	goto again;
-}
-
 /*
  * This can't do anything because nothing in the kernel image can be freed
  * since it's not in kernel physical memory.
@@ -295,37 +264,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void show_mem(void)
-{
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int high_mem = 0;
-	struct page *page;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages<<(PAGE_SHIFT-10));
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			high_mem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", high_mem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /* Allocate and free page tables. */
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 9757085a022..a1a9090254c 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -185,7 +185,7 @@ unsigned long find_iomem(char *driver, unsigned long *len_out)
 	return 0;
 }
 
-int setup_iomem(void)
+static int setup_iomem(void)
 {
 	struct iomem_region *region = iomem_regions;
 	unsigned long iomem_start = high_physmem + PAGE_SIZE;
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 83603cfbde8..a1c6d07cac3 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -243,7 +243,7 @@ void default_idle(void)
 		if (need_resched())
 			schedule();
 
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		nsecs = disable_timer();
 		idle_sleep(nsecs);
 		tick_nohz_restart_sched_tick();
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 47b57b497d5..15e8b7c4de1 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -225,7 +225,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
+static void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
 		  int error_code)
 {
 	struct siginfo info;
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index c3e2f369c33..47f04f4a346 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -13,14 +13,6 @@
 #include "kern_util.h"
 #include "os.h"
 
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	return (unsigned long long)jiffies_64 * (NSEC_PER_SEC / HZ);
-}
-
 void timer_handler(int sig, struct uml_pt_regs *regs)
 {
 	unsigned long flags;
diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c
index f0f4b040d7c..dd33f040c52 100644
--- a/arch/um/kernel/uaccess.c
+++ b/arch/um/kernel/uaccess.c
@@ -12,7 +12,7 @@
 #include <linux/string.h>
 #include "os.h"
 
-void __do_copy(void *to, const void *from, int n)
+static void __do_copy(void *to, const void *from, int n)
 {
 	memcpy(to, from, n);
 }
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index eb8f2e4be19..63d299df152 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -530,7 +530,7 @@ static void tty_close(int master, int slave)
 		printk(UM_KERN_CONT "No, enabling workaround\n");
 }
 
-void __init check_sigio(void)
+static void __init check_sigio(void)
 {
 	if ((access("/dev/ptmx", R_OK) < 0) &&
 	    (access("/dev/ptyp0", R_OK) < 0)) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 5aade6027e4..6ae180703a6 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -126,7 +126,7 @@ void set_sigstack(void *sig_stack, int size)
 		panic("enabling signal stack failed, errno = %d\n", errno);
 }
 
-void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
+static void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
 
 void handle_signal(int sig, struct sigcontext *sc)
 {
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 172ad8f72e1..d6e0a2234b8 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -96,7 +96,7 @@ bad_wait:
 
 extern unsigned long current_stub_stack(void);
 
-void get_skas_faultinfo(int pid, struct faultinfo * fi)
+static void get_skas_faultinfo(int pid, struct faultinfo *fi)
 {
 	int err;
 
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index 106fa864155..a27defb8188 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -245,7 +245,7 @@ int __init set_umid(char *name)
 /* Changed in make_umid, which is called during early boot */
 static int umid_setup = 0;
 
-int __init make_umid(void)
+static int __init make_umid(void)
 {
 	int fd, err;
 	char tmp[256];
diff --git a/arch/um/sys-i386/bugs.c b/arch/um/sys-i386/bugs.c
index a74442d1376..2c6d0d731c1 100644
--- a/arch/um/sys-i386/bugs.c
+++ b/arch/um/sys-i386/bugs.c
@@ -12,7 +12,7 @@
 #include "sysdep/ptrace.h"
 
 /* Set during early boot */
-int host_has_cmov = 1;
+static int host_has_cmov = 1;
 static jmp_buf cmov_test_return;
 
 static void cmov_sigill_test_handler(int sig)
diff --git a/arch/um/sys-i386/checksum.S b/arch/um/sys-i386/checksum.S
index 62c7e564f22..f058d2f82e1 100644
--- a/arch/um/sys-i386/checksum.S
+++ b/arch/um/sys-i386/checksum.S
@@ -243,13 +243,12 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
 	.previous
 
 .align 4
-.globl csum_partial_copy_generic_i386
-				
+
 #ifndef CONFIG_X86_USE_PPRO_CHECKSUM
 
 #define ARGBASE 16		
 #define FP		12
-		
+
 csum_partial_copy_generic_i386:
 	subl  $4,%esp	
 	pushl %edi
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index a34263e6b08..a4846a84a7b 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -14,8 +14,8 @@
 
 extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
 
-long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
-		     void **addr, int done)
+static long write_ldt_entry(struct mm_id *mm_idp, int func,
+		     struct user_desc *desc, void **addr, int done)
 {
 	long res;
 
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
deleted file mode 100644
index 4379f43505e..00000000000
--- a/arch/v850/Kconfig
+++ /dev/null
@@ -1,353 +0,0 @@
-#############################################################################
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-#############################################################################
-
-mainmenu "uClinux/v850 (w/o MMU) Kernel Configuration"
-
-config MMU
-       	bool
-	default n
-config ZONE_DMA
-	bool
-	default y
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-config GENERIC_HWEIGHT
-	bool
-	default y
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config GENERIC_TIME
-	bool
-	default y
-
-config TIME_LOW_RES
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
-# Turn off some random 386 crap that can affect device config
-config ISA
-	bool
-	default n
-config ISAPNP
-	bool
-	default n
-config EISA
-	bool
-	default n
-config MCA
-	bool
-	default n
-
-
-#############################################################################
-#### v850-specific config
-
-# Define the architecture
-config V850
-	bool
-	default y
-	select HAVE_IDE
-
-menu "Processor type and features"
-
-   choice
-	  prompt "Platform"
-	  default GDB
-      config V850E_SIM
-      	     bool "GDB"
-      config RTE_CB_MA1
-      	     bool "RTE-V850E/MA1-CB"
-      config RTE_CB_NB85E
-      	     bool "RTE-V850E/NB85E-CB"
-      config RTE_CB_ME2
-      	     bool "RTE-V850E/ME2-CB"
-      config V850E_AS85EP1
-      	     bool "AS85EP1"
-      config V850E2_SIM85E2C
-      	     bool "sim85e2c"
-      config V850E2_SIM85E2S
-      	     bool "sim85e2s"
-      config V850E2_FPGA85E2C
-      	     bool "NA85E2C-FPGA"
-      config V850E2_ANNA
-      	     bool "Anna"
-   endchoice
-
-   #### V850E processor-specific config
-
-   # All CPUs currently supported use the v850e architecture
-   config V850E
-   	  bool
-	  default y
-
-   # The RTE-V850E/MA1-CB is the only type of V850E/MA1 platform we
-   # currently support
-   config V850E_MA1
-   	  bool
-	  depends on RTE_CB_MA1
-	  default y
-   # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
-   config V850E_TEG
-   	  bool
-	  depends on RTE_CB_NB85E
-	  default y
-   # ... and the RTE-V850E/ME2-CB - V850E/ME2
-   config V850E_ME2
-   	  bool
-	  depends on RTE_CB_ME2
-	  default y
-
-
-   #### sim85e2-specific config
-
-   config V850E2_SIM85E2
-   	  bool
-	  depends on V850E2_SIM85E2C || V850E2_SIM85E2S
-	  default y
-
-
-   #### V850E2 processor-specific config
-
-   # V850E2 processors
-   config V850E2
-   	  bool
-	  depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
-	  default y
-
-
-   #### RTE-CB platform-specific config
-
-   # Boards in the RTE-x-CB series
-   config RTE_CB
-   	  bool
-	  depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
-	  default y
-
-   config RTE_CB_MULTI
-   	  bool
-	  # RTE_CB_NB85E can either have multi ROM support or not, but
-	  # other platforms (currently only RTE_CB_MA1) require it.
-	  prompt "Multi monitor ROM support" if RTE_CB_NB85E
-	  depends on RTE_CB_MA1 || RTE_CB_NB85E
-	  default y
-
-   config RTE_CB_MULTI_DBTRAP
-   	  bool "Pass illegal insn trap / dbtrap to kernel"
-	  depends on RTE_CB_MULTI
-	  default n
-
-   config RTE_CB_MA1_KSRAM
-   	  bool "Kernel in SRAM (limits size of kernel)"
-	  depends on RTE_CB_MA1 && RTE_CB_MULTI
-	  default n
-
-   config RTE_MB_A_PCI
-   	  bool "Mother-A PCI support"
-	  depends on RTE_CB
-	  default y
-
-   # The GBUS is used to talk to the RTE-MOTHER-A board
-   config RTE_GBUS_INT
-   	  bool
-	  depends on RTE_MB_A_PCI
-	  default y
-
-   # The only PCI bus we support is on the RTE-MOTHER-A board
-   config PCI
-   	  bool
-	  default RTE_MB_A_PCI
-
-   #### Some feature-specific configs
-
-   # Everything except for the GDB simulator uses the same interrupt controller
-   config V850E_INTC
-   	  bool
-	  default !V850E_SIM
-
-   # Everything except for the various simulators uses the "Timer D" unit
-   config V850E_TIMER_D
-   	  bool
-	  default !V850E_SIM && !V850E2_SIM85E2
-
-   # Cache control used on some v850e1 processors
-   config V850E_CACHE
-          bool
-	  default V850E_TEG || V850E_ME2
-
-   # Cache control used on v850e2 processors; I think this should
-   # actually apply to more, but currently only the SIM85E2S uses it
-   config V850E2_CACHE
-   	  bool
-	  default V850E2_SIM85E2S
-
-   config NO_CACHE
-   	  bool
-	  default !V850E_CACHE && !V850E2_CACHE
-
-   # HZ depends on the platform
-   config HZ
-	  int
-	  default 24  if V850E_SIM || V850E2_SIM85E2
-	  default 122 if V850E2_FPGA85E2C
-	  default 100
-
-   #### Misc config
-
-   config ROM_KERNEL
-   	  bool "Kernel in ROM"
-	  depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
-
-   # Some platforms pre-zero memory, in which case the kernel doesn't need to
-   config ZERO_BSS
-   	  bool
-	  depends on !V850E2_SIM85E2C
-	  default y
-
-   # The crappy-ass zone allocator requires that the start of allocatable
-   # memory be aligned to the largest possible allocation.
-   config FORCE_MAX_ZONEORDER
-   	  int
-	  default 8 if V850E2_SIM85E2C || V850E2_FPGA85E2C
-
-   config V850E_HIGHRES_TIMER
-   	  bool "High resolution timer support"
-	  depends on V850E_TIMER_D
-   config TIME_BOOTUP
-   	  bool "Time bootup"
-	  depends on V850E_HIGHRES_TIMER
-
-   config RESET_GUARD
-   	  bool "Reset Guard"
-
-source "mm/Kconfig"
-
-endmenu
-
-
-#############################################################################
-
-source init/Kconfig
-
-#############################################################################
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-#    config PCI
-# 	   bool "PCI support"
-# 	   help
-# 	     Support for PCI bus.
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-#############################################################################
-
-source "drivers/base/Kconfig"
-
-source drivers/mtd/Kconfig
-
-source drivers/parport/Kconfig
-
-#source drivers/pnp/Kconfig
-
-source drivers/block/Kconfig
-
-#############################################################################
-
-menu "Disk device support"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-endmenu
-
-#############################################################################
-
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-#source "drivers/telephony/Kconfig"
-
-#
-# input before char - char/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-#source drivers/misc/Config.in
-source "drivers/media/Kconfig"
-
-source "fs/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "arch/v850/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-#############################################################################
diff --git a/arch/v850/Kconfig.debug b/arch/v850/Kconfig.debug
deleted file mode 100644
index 4acfb9cca1c..00000000000
--- a/arch/v850/Kconfig.debug
+++ /dev/null
@@ -1,10 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config NO_KERNEL_MSG
-	bool "Suppress Kernel BUG Messages"
-	help
-	  Do not output any debug BUG messages within the kernel.
-
-endmenu
diff --git a/arch/v850/Makefile b/arch/v850/Makefile
deleted file mode 100644
index 8b629df0029..00000000000
--- a/arch/v850/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# arch/v850/Makefile
-#
-#  Copyright (C) 2001,02,03,05  NEC Corporation
-#  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-arch_dir = arch/v850
-
-KBUILD_CFLAGS += -mv850e
-# r16 is a fixed pointer to the current task
-KBUILD_CFLAGS += -ffixed-r16 -mno-prolog-function
-KBUILD_CFLAGS += -fno-builtin
-KBUILD_CFLAGS += -D__linux__ -DUTS_SYSNAME=\"uClinux\"
-
-# By default, build a kernel that runs on the gdb v850 simulator.
-KBUILD_DEFCONFIG := sim_defconfig
-
-# This prevents the linker from consolidating the .gnu.linkonce.this_module
-# section into .text (which the v850 default linker script for -r does for
-# some reason)
-LDFLAGS_MODULE += --unique=.gnu.linkonce.this_module
-
-OBJCOPY_FLAGS_BLOB := -I binary -O elf32-little -B v850e
-
-
-head-y := $(arch_dir)/kernel/head.o $(arch_dir)/kernel/init_task.o
-core-y += $(arch_dir)/kernel/
-libs-y += $(arch_dir)/lib/
-
-
-# Deal with the initial contents of the root device
-ifdef ROOT_FS_IMAGE
-core-y += root_fs_image.o
-
-# Because the kernel build-system erases all explicit .o build rules, we
-# have to use an intermediate target to fool it into building for us.
-# This results in it being built anew each time, but that's alright.
-root_fs_image.o: root_fs_image_force
-
-root_fs_image_force: $(ROOT_FS_IMAGE)
-	$(OBJCOPY) $(OBJCOPY_FLAGS_BLOB) --rename-section .data=.root,alloc,load,readonly,data,contents $< root_fs_image.o
-endif
-
-CLEAN_FILES += root_fs_image.o
diff --git a/arch/v850/README b/arch/v850/README
deleted file mode 100644
index 12f7f7a665e..00000000000
--- a/arch/v850/README
+++ /dev/null
@@ -1,44 +0,0 @@
-This port to the NEC V850E processor supports the following platforms:
-
-   "sim"
-	The gdb v850e simulator (CONFIG_V850E_SIM).
-
-   "rte-ma1-cb"
-	The Midas labs RTE-V850E/MA1-CB and RTE-V850E/NB85E-CB evaluation
-	boards (CONFIG_RTE_CB_MA1 and CONFIG_RTE_CB_NB85E).  This support
-	has only been tested when running with the Multi-debugger monitor
-	ROM (for the Green Hills Multi debugger).  The optional NEC
-	Solution Gear RTE-MOTHER-A motherboard is also supported, which
-	allows PCI boards to be used (CONFIG_RTE_MB_A_PCI).
-
-   "rte-me2-cb"
-	The Midas labs RTE-V850E/ME2-CB evaluation board (CONFIG_RTE_CB_ME2).
-     	This has only been tested using a kernel downloaded via an ICE
-     	connection using the Multi debugger.  Support for the RTE-MOTHER-A is
-     	present, but hasn't been tested (unlike the other Midas labs cpu
-     	boards, the RTE-V850E/ME2-CB includes an ethernet adaptor).
-
-   "as85ep1"
-	The NEC AS85EP1 V850E evaluation chip/board (CONFIG_V850E_AS85EP1).
-
-   "anna"
-	The NEC `Anna' (board/chip) implementation of the V850E2 processor
-	(CONFIG_V850E2_ANNA).
-
-   "sim85e2c", "sim85e2s"
-   	The sim85e2c and sim85e2s simulators, which are verilog simulations
-	of the V850E2 NA85E2C/NA85E2S cpu cores (CONFIG_V850E2_SIM85E2C and
-	CONFIG_V850E2_SIM85E2S).
-
-   "fpga85e2c"
-	A FPGA implementation of the V850E2 NA85E2C cpu core
-	(CONFIG_V850E2_FPGA85E2C).
-
-To get a default kernel configuration for a particular platform, you can
-use a <platform>_defconfig make target (e.g., "make rte-me2-cb_defconfig");
-to see which default configurations are possible, look in the directory
-"arch/v850/configs".
-
-Porting to anything with a V850E/MA1 or MA2 processor should be simple.
-See the file <asm-v850/machdep.h> and the files it includes for an example of
-how to add platform/chip-specific support.
diff --git a/arch/v850/configs/rte-ma1-cb_defconfig b/arch/v850/configs/rte-ma1-cb_defconfig
deleted file mode 100644
index 1a5beda36e2..00000000000
--- a/arch/v850/configs/rte-ma1-cb_defconfig
+++ /dev/null
@@ -1,617 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:54:27 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-CONFIG_RTE_CB_MA1=y
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_MA1=y
-CONFIG_RTE_CB=y
-CONFIG_RTE_CB_MULTI=y
-CONFIG_RTE_CB_MULTI_DBTRAP=y
-# CONFIG_RTE_CB_MA1_KSRAM is not set
-CONFIG_RTE_MB_A_PCI=y
-CONFIG_RTE_GBUS_INT=y
-CONFIG_PCI=y
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NE2000 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_V850E_UART=y
-CONFIG_V850E_UART_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/rte-me2-cb_defconfig b/arch/v850/configs/rte-me2-cb_defconfig
deleted file mode 100644
index 15e66647806..00000000000
--- a/arch/v850/configs/rte-me2-cb_defconfig
+++ /dev/null
@@ -1,462 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:47:50 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-CONFIG_RTE_CB_ME2=y
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_ME2=y
-CONFIG_RTE_CB=y
-# CONFIG_RTE_MB_A_PCI is not set
-# CONFIG_PCI is not set
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-CONFIG_V850E_CACHE=y
-# CONFIG_V850E2_CACHE is not set
-# CONFIG_NO_CACHE is not set
-# CONFIG_ROM_KERNEL is not set
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_V850E_UART is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/sim_defconfig b/arch/v850/configs/sim_defconfig
deleted file mode 100644
index f31ba7398ad..00000000000
--- a/arch/v850/configs/sim_defconfig
+++ /dev/null
@@ -1,451 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:36:43 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-CONFIG_V850E_SIM=y
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-# CONFIG_PCI is not set
-# CONFIG_V850E_INTC is not set
-# CONFIG_V850E_TIMER_D is not set
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/kernel/Makefile b/arch/v850/kernel/Makefile
deleted file mode 100644
index da5889c5357..00000000000
--- a/arch/v850/kernel/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# arch/v850/kernel/Makefile
-#
-#  Copyright (C) 2001,02,03  NEC Electronics Corporation
-#  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y += intv.o entry.o process.o syscalls.o time.o setup.o \
-	 signal.o irq.o mach.o ptrace.o bug.o
-obj-$(CONFIG_MODULES)		+= module.o v850_ksyms.o
-# chip-specific code
-obj-$(CONFIG_V850E_MA1)		+= ma.o
-obj-$(CONFIG_V850E_ME2)		+= me2.o
-obj-$(CONFIG_V850E_TEG)		+= teg.o
-obj-$(CONFIG_V850E_AS85EP1)	+= as85ep1.o
-obj-$(CONFIG_V850E2_ANNA)	+= anna.o
-# platform-specific code
-obj-$(CONFIG_V850E_SIM)		+= sim.o simcons.o
-obj-$(CONFIG_V850E2_SIM85E2)	+= sim85e2.o memcons.o
-obj-$(CONFIG_V850E2_FPGA85E2C)	+= fpga85e2c.o memcons.o
-obj-$(CONFIG_RTE_CB)		+= rte_cb.o rte_cb_leds.o
-obj-$(CONFIG_RTE_CB_MA1)	+= rte_ma1_cb.o
-obj-$(CONFIG_RTE_CB_ME2)	+= rte_me2_cb.o
-obj-$(CONFIG_RTE_CB_NB85E)	+= rte_nb85e_cb.o
-obj-$(CONFIG_RTE_CB_MULTI)	+= rte_cb_multi.o
-obj-$(CONFIG_RTE_MB_A_PCI)	+= rte_mb_a_pci.o
-obj-$(CONFIG_RTE_GBUS_INT)	+= gbus_int.o
-# feature-specific code
-obj-$(CONFIG_V850E_INTC)	+= v850e_intc.o
-obj-$(CONFIG_V850E_TIMER_D)	+= v850e_timer_d.o v850e_utils.o
-obj-$(CONFIG_V850E_CACHE)	+= v850e_cache.o
-obj-$(CONFIG_V850E2_CACHE)	+= v850e2_cache.o
-obj-$(CONFIG_V850E_HIGHRES_TIMER) += highres_timer.o
-obj-$(CONFIG_PROC_FS)		+= procfs.o
diff --git a/arch/v850/kernel/anna-rom.ld b/arch/v850/kernel/anna-rom.ld
deleted file mode 100644
index 7c54e7e3f1b..00000000000
--- a/arch/v850/kernel/anna-rom.ld
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 8MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00800000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c
deleted file mode 100644
index 5978a25170f..00000000000
--- a/arch/v850/kernel/anna.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/v850/kernel/anna.c -- Anna V850E2 evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	0
-
-
-static void anna_led_tick (void);
-
-
-void __init mach_early_init (void)
-{
-	ANNA_ILBEN    = 0;
-
-	V850E2_CSC(0) = 0x402F;
-	V850E2_CSC(1) = 0x4000;
-	V850E2_BPC    = 0;
-	V850E2_BSC    = 0xAAAA;
-	V850E2_BEC    = 0;
-
-#if 0
-	V850E2_BHC    = 0xFFFF;	/* icache all memory, dcache all */
-#else
-	V850E2_BHC    = 0;	/* cache no memory */
-#endif
-	V850E2_BCT(0) = 0xB088;
-	V850E2_BCT(1) = 0x0008;
-	V850E2_DWC(0) = 0x0027;
-	V850E2_DWC(1) = 0;
-	V850E2_BCC    = 0x0006;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0x0089;
-	V850E2_SCR(3) = 0x21A9;
-	V850E2_RFS(3) = 0x8121;
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	ANNA_PORT_PM (LEDS_PORT) = 0;	/* Make all LED pins output pins.  */
-	mach_tick = anna_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "PIN", IRQ_INTP(0),   IRQ_INTP_NUM,   1, 4 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "DMXER", IRQ_INTDMXER,1,		1, 2 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	ANNA_PORT_IO(LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* The Anna connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P07
-	   and P37 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		ANNA_PORT_PM(0) &= ~0x80; /* P07 in output mode */
-		ANNA_PORT_PM(3) |=  0x80; /* P37 in input mode */
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  We can't use the last bit because it's used for
-   UART0's CTS output.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 6
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void anna_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				clear_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-				pos += dir;
-				set_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/anna.ld b/arch/v850/kernel/anna.ld
deleted file mode 100644
index df7f80f2833..00000000000
--- a/arch/v850/kernel/anna.ld
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA).  */
-
-MEMORY {
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00040000
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM1 : ORIGIN = 0x00040000, LENGTH = 0x00040000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > iMEM0
-	.sram : { RAMK_KRAM_CONTENTS } > SRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/as85ep1-rom.ld b/arch/v850/kernel/as85ep1-rom.ld
deleted file mode 100644
index fe2a9a3ab52..00000000000
--- a/arch/v850/kernel/as85ep1-rom.ld
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 4MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00400000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jumper JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c
deleted file mode 100644
index b525ecf3aea..00000000000
--- a/arch/v850/kernel/as85ep1.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * arch/v850/kernel/as85ep1.c -- AS85EP1 V850E evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	4
-
-
-static void as85ep1_led_tick (void);
-
-extern char _intv_copy_src_start, _intv_copy_src_end;
-extern char _intv_copy_dst_start;
-
-
-void __init mach_early_init (void)
-{
-#ifndef CONFIG_ROM_KERNEL
-	const u32 *src;
-	register u32 *dst asm ("ep");
-#endif
-
-	AS85EP1_CSC(0) = 0x0403;
-	AS85EP1_BCT(0) = 0xB8B8;
-	AS85EP1_DWC(0) = 0x0104;
-	AS85EP1_BCC    = 0x0012;
-	AS85EP1_ASC    = 0;
-	AS85EP1_LBS    = 0x00A9;
-
-	AS85EP1_PORT_PMC(6)  = 0xFF; /* valid A0,A1,A20-A25 */
-	AS85EP1_PORT_PMC(7)  = 0x0E; /* valid CS1-CS3       */
-	AS85EP1_PORT_PMC(9)  = 0xFF; /* valid D16-D23       */
-	AS85EP1_PORT_PMC(10) = 0xFF; /* valid D24-D31       */
-
-	AS85EP1_RFS(1) = 0x800c;
-	AS85EP1_RFS(3) = 0x800c;
-	AS85EP1_SCR(1) = 0x20A9;
-	AS85EP1_SCR(3) = 0x20A9;
-
-#ifndef CONFIG_ROM_KERNEL
-	/* The early chip we have is buggy, and writing the interrupt
-	   vectors into low RAM may screw up, so for non-ROM kernels, we
-	   only rely on the reset vector being downloaded, and copy the
-	   rest of the interrupt vectors into place here.  The specific bug
-	   is that writing address N, where (N & 0x10) == 0x10, will _also_
-	   write to address (N - 0x10).  We avoid this (effectively) by
-	   writing in 16-byte chunks backwards from the end.  */
-
-	AS85EP1_IRAMM = 0x3;	/* "write-mode" for the internal instruction memory */
-
-	src = (u32 *)(((u32)&_intv_copy_src_end - 1) & ~0xF);
-	dst = (u32 *)&_intv_copy_dst_start
-		+ (src - (u32 *)&_intv_copy_src_start);
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst -= 4;
-		src -= 4;
-	} while (src > (u32 *)&_intv_copy_src_start);
-
-	AS85EP1_IRAMM = 0x0;	/* "read-mode" for the internal instruction memory */
-#endif /* !CONFIG_ROM_KERNEL */
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	AS85EP1_PORT_PMC (LEDS_PORT) = 0; /* Make the LEDs port an I/O port. */
-	AS85EP1_PORT_PM (LEDS_PORT) = 0; /* Make all the bits output pins.  */
-	mach_tick = as85ep1_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-/* Convenience macros.  */
-#define SRAM_END	(SRAM_ADDR + SRAM_SIZE)
-#define SDRAM_END	(SDRAM_ADDR + SDRAM_SIZE)
-
-void __init mach_reserve_bootmem ()
-{
-	if (SDRAM_ADDR < RAM_END && SDRAM_ADDR > RAM_START)
-		/* We can't use the space between SRAM and SDRAM, so
-		   prevent the kernel from trying.  */
-		reserve_bootmem(SRAM_END, SDRAM_ADDR - SRAM_END,
-				BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	AS85EP1_PORT_IO (LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Make the shared uart/port pins be uart pins.  */
-	AS85EP1_PORT_PMC(3) |= (0x5 << chan);
-
-	/* The AS85EP1 connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P53
-	   and P54 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		/* Put P53 & P54 in I/O port mode.  */
-		AS85EP1_PORT_PMC(5) &= ~0x18;
-		/* Make P53 an output, and P54 an input.  */
-		AS85EP1_PORT_PM(5) |=  0x10;
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 7
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void as85ep1_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				set_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-				pos += dir;
-				clear_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
deleted file mode 100644
index ef2c4399063..00000000000
--- a/arch/v850/kernel/as85ep1.ld
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1).  */
-
-MEMORY {
-	/* 1MB of internal instruction memory. */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00100000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jump JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.resetv : {
-		__intv_start = . ;
-			*(.intv.reset)	/* Reset vector */
-	} > iMEM0
-
-	.sram : {
-		RAMK_KRAM_CONTENTS
-
-		/* We stick most of the interrupt vectors here; they'll be
-		   copied into the proper location by the early init code (we
-		   can't put them directly in the right place because of
-		   hardware bugs).  The vectors shouldn't need to be
-		   relocated, so we don't have to use `> ...  AT> ...' to
-		   split the load/vm addresses (and we can't because of
-		   problems with the loader).  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_start = . ;
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_end = . ;
-	} > SRAM
-
-	/* Where we end up putting the vectors.  */
-	__intv_copy_dst_start = 0x10 ;
-	__intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
-	__intv_end = __intv_copy_dst_end ;
-
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/asm-offsets.c b/arch/v850/kernel/asm-offsets.c
deleted file mode 100644
index 581e6986a77..00000000000
--- a/arch/v850/kernel/asm-offsets.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-int main (void)
-{
-	/* offsets into the task struct */
-	DEFINE (TASK_STATE, offsetof (struct task_struct, state));
-	DEFINE (TASK_FLAGS, offsetof (struct task_struct, flags));
-	DEFINE (TASK_PTRACE, offsetof (struct task_struct, ptrace));
-	DEFINE (TASK_BLOCKED, offsetof (struct task_struct, blocked));
-	DEFINE (TASK_THREAD, offsetof (struct task_struct, thread));
-	DEFINE (TASK_THREAD_INFO, offsetof (struct task_struct, stack));
-	DEFINE (TASK_MM, offsetof (struct task_struct, mm));
-	DEFINE (TASK_ACTIVE_MM, offsetof (struct task_struct, active_mm));
-	DEFINE (TASK_PID, offsetof (struct task_struct, pid));
-
-	/* offsets into the kernel_stat struct */
-	DEFINE (STAT_IRQ, offsetof (struct kernel_stat, irqs));
-
-
-	/* signal defines */
-	DEFINE (SIGSEGV, SIGSEGV);
-	DEFINE (SEGV_MAPERR, SEGV_MAPERR);
-	DEFINE (SIGTRAP, SIGTRAP);
-	DEFINE (SIGCHLD, SIGCHLD);
-	DEFINE (SIGILL, SIGILL);
-	DEFINE (TRAP_TRACE, TRAP_TRACE);
-
-	/* ptrace flag bits */
-	DEFINE (PT_PTRACED, PT_PTRACED);
-	DEFINE (PT_DTRACE, PT_DTRACE);
-
-	/* error values */
-	DEFINE (ENOSYS, ENOSYS);
-
-	/* clone flag bits */
-	DEFINE (CLONE_VFORK, CLONE_VFORK);
-	DEFINE (CLONE_VM, CLONE_VM);
-
-	return 0;
-}
diff --git a/arch/v850/kernel/bug.c b/arch/v850/kernel/bug.c
deleted file mode 100644
index c78cf750915..00000000000
--- a/arch/v850/kernel/bug.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/v850/kernel/bug.c -- Bug reporting functions
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/current.h>
-
-/* We should use __builtin_return_address, but it doesn't work in gcc-2.90
-   (which is currently our standard compiler on the v850).  */
-#define ret_addr() ({ register u32 lp asm ("lp"); lp; })
-#define stack_addr() ({ register u32 sp asm ("sp"); sp; })
-
-void __bug ()
-{
-	printk (KERN_CRIT "kernel BUG at PC 0x%x (SP ~0x%x)!\n",
-		ret_addr() - 4, /* - 4 for `jarl' */
-		stack_addr());
-	machine_halt ();
-}
-
-int bad_trap (int trap_num, struct pt_regs *regs)
-{
-	printk (KERN_CRIT
-		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
-		trap_num, regs->pc, current->pid);
-	return -ENOSYS;
-}
-
-#ifdef CONFIG_RESET_GUARD
-void unexpected_reset (unsigned long ret_addr, unsigned long kmode,
-		       struct task_struct *task, unsigned long sp)
-{
-	printk (KERN_CRIT
-		"unexpected reset in %s mode, pid %d"
-		" (ret_addr = 0x%lx, sp = 0x%lx)\n",
-		kmode ? "kernel" : "user",
-		task ? task->pid : -1,
-		ret_addr, sp);
-
-	machine_halt ();
-}
-#endif /* CONFIG_RESET_GUARD */
-
-
-
-struct spec_reg_name {
-	const char *name;
-	int gpr;
-};
-
-struct spec_reg_name spec_reg_names[] = {
-	{ "sp", GPR_SP },
-	{ "gp", GPR_GP },
-	{ "tp", GPR_TP },
-	{ "ep", GPR_EP },
-	{ "lp", GPR_LP },
-	{ 0, 0 }
-};
-
-void show_regs (struct pt_regs *regs)
-{
-	int gpr_base, gpr_offs;
-
-	printk ("     pc 0x%08lx    psw 0x%08lx                       kernel_mode %d\n",
-		regs->pc, regs->psw, regs->kernel_mode);
-	printk ("   ctpc 0x%08lx  ctpsw 0x%08lx   ctbp 0x%08lx\n",
-		regs->ctpc, regs->ctpsw, regs->ctbp);
-
-	for (gpr_base = 0; gpr_base < NUM_GPRS; gpr_base += 4) {
-		for (gpr_offs = 0; gpr_offs < 4; gpr_offs++) {
-			int gpr = gpr_base + gpr_offs;
-			long val = regs->gpr[gpr];
-			struct spec_reg_name *srn;
-
-			for (srn = spec_reg_names; srn->name; srn++)
-				if (srn->gpr == gpr)
-					break;
-
-			if (srn->name)
-				printk ("%7s 0x%08lx", srn->name, val);
-			else
-				printk ("    r%02d 0x%08lx", gpr, val);
-		}
-
-		printk ("\n");
-	}
-}
-
-/*
- * TASK is a pointer to the task whose backtrace we want to see (or NULL
- * for current task), SP is the stack pointer of the first frame that
- * should be shown in the back trace (or NULL if the entire call-chain of
- * the task should be shown).
- */
-void show_stack (struct task_struct *task, unsigned long *sp)
-{
-	unsigned long addr, end;
-
-	if (sp)
-		addr = (unsigned long)sp;
-	else if (task)
-		addr = task_sp (task);
-	else
-		addr = stack_addr ();
-
-	addr = addr & ~3;
-	end = (addr + THREAD_SIZE - 1) & THREAD_MASK;
-
-	while (addr < end) {
-		printk ("%8lX: ", addr);
-		while (addr < end) {
-			printk (" %8lX", *(unsigned long *)addr);
-			addr += sizeof (unsigned long);
-			if (! (addr & 0xF))
-				break;
-		}
-		printk ("\n");
-	}
-}
-
-void dump_stack ()
-{
-	show_stack (0, 0);
-}
-
-EXPORT_SYMBOL(dump_stack);
diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S
deleted file mode 100644
index e4327a8d6bc..00000000000
--- a/arch/v850/kernel/entry.S
+++ /dev/null
@@ -1,1121 +0,0 @@
-/*
- * arch/v850/kernel/entry.S -- Low-level system-call handling, trap handlers,
- *	and context-switching
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/sys.h>
-
-#include <asm/entry.h>
-#include <asm/current.h>
-#include <asm/thread_info.h>
-#include <asm/clinkage.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-#include <asm/asm-offsets.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM	C_SYMBOL_NAME
-
-
-/* The offset of the struct pt_regs in a state-save-frame on the stack.  */
-#define PTO	STATE_SAVE_PT_OFFSET
-
-
-/* Save argument registers to the state-save-frame pointed to by EP.  */
-#define SAVE_ARG_REGS							      \
-	sst.w	r6, PTO+PT_GPR(6)[ep];					      \
-	sst.w	r7, PTO+PT_GPR(7)[ep];					      \
-	sst.w	r8, PTO+PT_GPR(8)[ep];					      \
-	sst.w	r9, PTO+PT_GPR(9)[ep]
-/* Restore argument registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_ARG_REGS						      \
-	sld.w	PTO+PT_GPR(6)[ep], r6;					      \
-	sld.w	PTO+PT_GPR(7)[ep], r7;					      \
-	sld.w	PTO+PT_GPR(8)[ep], r8;					      \
-	sld.w	PTO+PT_GPR(9)[ep], r9
-
-/* Save value return registers to the state-save-frame pointed to by EP.  */
-#define SAVE_RVAL_REGS							      \
-	sst.w	r10, PTO+PT_GPR(10)[ep];				      \
-	sst.w	r11, PTO+PT_GPR(11)[ep]
-/* Restore value return registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_RVAL_REGS						      \
-	sld.w	PTO+PT_GPR(10)[ep], r10;				      \
-	sld.w	PTO+PT_GPR(11)[ep], r11
-
-
-#define SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS				      \
-	sst.w	r1, PTO+PT_GPR(1)[ep];					      \
-	sst.w	r5, PTO+PT_GPR(5)[ep]
-#define SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL				      \
-	sst.w	r12, PTO+PT_GPR(12)[ep];				      \
-	sst.w	r13, PTO+PT_GPR(13)[ep];				      \
-	sst.w	r14, PTO+PT_GPR(14)[ep];				      \
-	sst.w	r15, PTO+PT_GPR(15)[ep];				      \
-	sst.w	r16, PTO+PT_GPR(16)[ep];				      \
-	sst.w	r17, PTO+PT_GPR(17)[ep];				      \
-	sst.w	r18, PTO+PT_GPR(18)[ep];				      \
-	sst.w	r19, PTO+PT_GPR(19)[ep]
-#define RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS				      \
-	sld.w	PTO+PT_GPR(1)[ep], r1;					      \
-	sld.w	PTO+PT_GPR(5)[ep], r5
-#define RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL				      \
-	sld.w	PTO+PT_GPR(12)[ep], r12;				      \
-	sld.w	PTO+PT_GPR(13)[ep], r13;				      \
-	sld.w	PTO+PT_GPR(14)[ep], r14;				      \
-	sld.w	PTO+PT_GPR(15)[ep], r15;				      \
-	sld.w	PTO+PT_GPR(16)[ep], r16;				      \
-	sld.w	PTO+PT_GPR(17)[ep], r17;				      \
-	sld.w	PTO+PT_GPR(18)[ep], r18;				      \
-	sld.w	PTO+PT_GPR(19)[ep], r19
-
-/* Save `call clobbered' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS					      \
-	SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;				      \
-	SAVE_ARG_REGS;							      \
-	SAVE_RVAL_REGS;							      \
-	SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers from the state-save-frame pointed to
-   by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS					      \
-	RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;			      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_RVAL_REGS;						      \
-	RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call clobbered' registers except for the return-value registers
-   to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS_NO_RVAL				      \
-	SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;				      \
-	SAVE_ARG_REGS;							      \
-	SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers except for the return-value registers
-   from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS_NO_RVAL				      \
-	RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;			      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call saved' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_SAVED_REGS						      \
-	sst.w	r2, PTO+PT_GPR(2)[ep];					      \
-	sst.w	r20, PTO+PT_GPR(20)[ep];				      \
-	sst.w	r21, PTO+PT_GPR(21)[ep];				      \
-	sst.w	r22, PTO+PT_GPR(22)[ep];				      \
-	sst.w	r23, PTO+PT_GPR(23)[ep];				      \
-	sst.w	r24, PTO+PT_GPR(24)[ep];				      \
-	sst.w	r25, PTO+PT_GPR(25)[ep];				      \
-	sst.w	r26, PTO+PT_GPR(26)[ep];				      \
-	sst.w	r27, PTO+PT_GPR(27)[ep];				      \
-	sst.w	r28, PTO+PT_GPR(28)[ep];				      \
-	sst.w	r29, PTO+PT_GPR(29)[ep]
-/* Restore `call saved' registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_SAVED_REGS						      \
-	sld.w	PTO+PT_GPR(2)[ep], r2;					      \
-	sld.w	PTO+PT_GPR(20)[ep], r20;				      \
-	sld.w	PTO+PT_GPR(21)[ep], r21;				      \
-	sld.w	PTO+PT_GPR(22)[ep], r22;				      \
-	sld.w	PTO+PT_GPR(23)[ep], r23;				      \
-	sld.w	PTO+PT_GPR(24)[ep], r24;				      \
-	sld.w	PTO+PT_GPR(25)[ep], r25;				      \
-	sld.w	PTO+PT_GPR(26)[ep], r26;				      \
-	sld.w	PTO+PT_GPR(27)[ep], r27;				      \
-	sld.w	PTO+PT_GPR(28)[ep], r28;				      \
-	sld.w	PTO+PT_GPR(29)[ep], r29
-
-
-/* Save the PC stored in the special register SAVEREG to the state-save-frame
-   pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PC(savereg)						      \
-	stsr	SR_ ## savereg, r19;					      \
-	sst.w	r19, PTO+PT_PC[ep]
-/* Restore the PC from the state-save-frame pointed to by EP, to the special
-   register SAVEREG.  LP is clobbered (it is used as a scratch register
-   because the POP_STATE macro restores it, and this macro is usually used
-   inside POP_STATE).  */
-#define RESTORE_PC(savereg)						      \
-	sld.w	PTO+PT_PC[ep], lp;					      \
-	ldsr	lp, SR_ ## savereg
-/* Save the PSW register stored in the special register SAVREG to the
-   state-save-frame pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PSW(savereg)						      \
-	stsr	SR_ ## savereg, r19;					      \
-	sst.w	r19, PTO+PT_PSW[ep]
-/* Restore the PSW register from the state-save-frame pointed to by EP, to
-   the special register SAVEREG.  LP is clobbered (it is used as a scratch
-   register because the POP_STATE macro restores it, and this macro is
-   usually used inside POP_STATE).  */
-#define RESTORE_PSW(savereg)						      \
-	sld.w	PTO+PT_PSW[ep], lp;					      \
-	ldsr	lp, SR_ ## savereg
-
-/* Save CTPC/CTPSW/CTBP registers to the state-save-frame pointed to by REG.
-   r19 is clobbered.  */
-#define SAVE_CT_REGS							      \
-	stsr	SR_CTPC, r19;						      \
-	sst.w	r19, PTO+PT_CTPC[ep];					      \
-	stsr	SR_CTPSW, r19;						      \
-	sst.w	r19, PTO+PT_CTPSW[ep];					      \
-	stsr	SR_CTBP, r19;						      \
-	sst.w	r19, PTO+PT_CTBP[ep]
-/* Restore CTPC/CTPSW/CTBP registers from the state-save-frame pointed to by EP.
-   LP is clobbered (it is used as a scratch register because the POP_STATE
-   macro restores it, and this macro is usually used inside POP_STATE).  */
-#define RESTORE_CT_REGS							      \
-	sld.w	PTO+PT_CTPC[ep], lp;					      \
-	ldsr	lp, SR_CTPC;						      \
-	sld.w	PTO+PT_CTPSW[ep], lp;					      \
-	ldsr	lp, SR_CTPSW;						      \
-	sld.w	PTO+PT_CTBP[ep], lp;					      \
-	ldsr	lp, SR_CTBP
-
-
-/* Push register state, except for the stack pointer, on the stack in the
-   form of a state-save-frame (plus some extra padding), in preparation for
-   a system call.  This macro makes sure that the EP, GP, and LP
-   registers are saved, and TYPE identifies the set of extra registers to
-   be saved as well.  Also copies (the new value of) SP to EP.  */
-#define PUSH_STATE(type)						      \
-	addi	-STATE_SAVE_SIZE, sp, sp; /* Make room on the stack.  */      \
-	st.w	ep, PTO+PT_GPR(GPR_EP)[sp];				      \
-	mov	sp, ep;							      \
-	sst.w	gp, PTO+PT_GPR(GPR_GP)[ep];				      \
-	sst.w	lp, PTO+PT_GPR(GPR_LP)[ep];				      \
-	type ## _STATE_SAVER
-/* Pop a register state pushed by PUSH_STATE, except for the stack pointer,
-   from the stack.  */
-#define POP_STATE(type)							      \
-	mov	sp, ep;							      \
-	type ## _STATE_RESTORER;					      \
-	sld.w	PTO+PT_GPR(GPR_GP)[ep], gp;				      \
-	sld.w	PTO+PT_GPR(GPR_LP)[ep], lp;				      \
-	sld.w	PTO+PT_GPR(GPR_EP)[ep], ep;				      \
-	addi	STATE_SAVE_SIZE, sp, sp /* Clean up our stack space.  */
-
-
-/* Switch to the kernel stack if necessary, and push register state on the
-   stack in the form of a state-save-frame.  Also load the current task
-   pointer if switching from user mode.  The stack-pointer (r3) should have
-   already been saved to the memory location SP_SAVE_LOC (the reason for
-   this is that the interrupt vectors may be beyond a 22-bit signed offset
-   jump from the actual interrupt handler, and this allows them to save the
-   stack-pointer and use that register to do an indirect jump).  This macro
-   makes sure that `special' registers, system registers, and the stack
-   pointer are saved; TYPE identifies the set of extra registers to be
-   saved as well.  SYSCALL_NUM is the register in which the system-call
-   number this state is for is stored (r0 if this isn't a system call).
-   Interrupts should already be disabled when calling this.  */
-#define SAVE_STATE(type, syscall_num, sp_save_loc)			      \
-	tst1	0, KM;			/* See if already in kernel mode.  */ \
-	bz	1f;							      \
-	ld.w	sp_save_loc, sp;	/* ... yes, use saved SP.  */	      \
-	br	2f;							      \
-1:	ld.w	KSP, sp;		/* ... no, switch to kernel stack. */ \
-2:	PUSH_STATE(type);						      \
-	ld.b	KM, r19;		/* Remember old kernel-mode.  */      \
-	sst.w	r19, PTO+PT_KERNEL_MODE[ep];				      \
-	ld.w	sp_save_loc, r19;	/* Remember old SP.  */		      \
-	sst.w	r19, PTO+PT_GPR(GPR_SP)[ep];				      \
-	mov	1, r19;			/* Now definitely in kernel-mode. */  \
-	st.b	r19, KM;						      \
-	GET_CURRENT_TASK(CURRENT_TASK);	/* Fetch the current task pointer. */ \
-	/* Save away the syscall number.  */				      \
-	sst.w	syscall_num, PTO+PT_CUR_SYSCALL[ep]
-
-
-/* Save register state not normally saved by PUSH_STATE for TYPE, to the
-   state-save-frame on the stack; also copies SP to EP.  r19 may be trashed. */
-#define SAVE_EXTRA_STATE(type)						      \
-	mov	sp, ep;							      \
-	type ## _EXTRA_STATE_SAVER
-/* Restore register state not normally restored by POP_STATE for TYPE,
-   from the state-save-frame on the stack; also copies SP to EP.
-   r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE(type)					      \
-	mov	sp, ep;							      \
-	type ## _EXTRA_STATE_RESTORER
-
-/* Save any call-clobbered registers not normally saved by PUSH_STATE for
-   TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most SAVE_... macros).  r19 may be trashed.  */
-#define SAVE_EXTRA_STATE_FOR_SCHEDULE(type)				      \
-	type ## _SCHEDULE_EXTRA_STATE_SAVER
-/* Restore any call-clobbered registers not normally restored by
-   POP_STATE for TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most RESTORE_... macros).  r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE_FOR_SCHEDULE(type)				      \
-	type ## _SCHEDULE_EXTRA_STATE_RESTORER
-
-
-/* These are extra_state_saver/restorer values for a user trap.  Note
-   that we save the argument registers so that restarted syscalls will
-   function properly (otherwise it wouldn't be necessary), and we must
-   _not_ restore the return-value registers (so that traps can return a
-   value!), but call-clobbered registers are not saved at all, as the
-   caller of the syscall function should have saved them.  */
-
-#define TRAP_RET reti
-/* Traps don't save call-clobbered registers (but do still save arg regs).
-   We preserve PSw to keep long-term state, namely interrupt status (for traps
-   from kernel-mode), and the single-step flag (for user traps).  */
-#define TRAP_STATE_SAVER						      \
-	SAVE_ARG_REGS;							      \
-	SAVE_PC(EIPC);							      \
-	SAVE_PSW(EIPSW)
-/* When traps return, they just leave call-clobbered registers (except for arg
-   regs) with whatever value they have from the kernel.  Traps don't preserve
-   the PSW, but we zero EIPSW to ensure it doesn't contain anything dangerous
-   (in particular, the single-step flag).  */
-#define TRAP_STATE_RESTORER						      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_PC(EIPC);						      \
-	RESTORE_PSW(EIPSW)
-/* Save registers not normally saved by traps.  We need to save r12, even
-   though it's nominally call-clobbered, because it's used when restarting
-   a system call (the signal-handling path uses SAVE_EXTRA_STATE, and
-   expects r12 to be restored when the trap returns).  */
-#define TRAP_EXTRA_STATE_SAVER						      \
-	SAVE_RVAL_REGS;							      \
-	sst.w	r12, PTO+PT_GPR(12)[ep];				      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define TRAP_EXTRA_STATE_RESTORER					      \
-	RESTORE_RVAL_REGS;						      \
-	sld.w	PTO+PT_GPR(12)[ep], r12;				      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-/* Save registers prior to calling scheduler (just before trap returns).
-   We have to save the return-value registers to preserve the trap's return
-   value.  Note that ..._SCHEDULE_EXTRA_STATE_SAVER, unlike most ..._SAVER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_SAVER					      \
-	mov sp, ep;							      \
-	SAVE_RVAL_REGS
-/* Note that ..._SCHEDULE_EXTRA_STATE_RESTORER, unlike most ..._RESTORER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_RESTORER				      \
-	mov sp, ep;							      \
-	RESTORE_RVAL_REGS
-
-/* Register saving/restoring for maskable interrupts.  */
-#define IRQ_RET reti
-#define IRQ_STATE_SAVER							      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(EIPC);							      \
-	SAVE_PSW(EIPSW)
-#define IRQ_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(EIPC);						      \
-	RESTORE_PSW(EIPSW)
-#define IRQ_EXTRA_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define IRQ_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define IRQ_SCHEDULE_EXTRA_STATE_SAVER	     /* nothing */
-#define IRQ_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for non-maskable interrupts.  */
-#define NMI_RET reti
-#define NMI_STATE_SAVER							      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(FEPC);							      \
-	SAVE_PSW(FEPSW);
-#define NMI_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(FEPC);						      \
-	RESTORE_PSW(FEPSW);
-#define NMI_EXTRA_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define NMI_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define NMI_SCHEDULE_EXTRA_STATE_SAVER	     /* nothing */
-#define NMI_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for debug traps.  */
-#define DBTRAP_RET .long 0x014607E0 /* `dbret', but gas doesn't support it. */
-#define DBTRAP_STATE_SAVER						      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(DBPC);							      \
-	SAVE_PSW(DBPSW)
-#define DBTRAP_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(DBPC);						      \
-	RESTORE_PSW(DBPSW)
-#define DBTRAP_EXTRA_STATE_SAVER					      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define DBTRAP_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define DBTRAP_SCHEDULE_EXTRA_STATE_SAVER	/* nothing */
-#define DBTRAP_SCHEDULE_EXTRA_STATE_RESTORER	/* nothing */
-
-/* Register saving/restoring for a context switch.  We don't need to save
-   too many registers, because context-switching looks like a function call
-   (via the function `switch_thread'), so callers will save any
-   call-clobbered registers themselves.  We do need to save the CT regs, as
-   they're normally not saved during kernel entry (the kernel doesn't use
-   them).  We save PSW so that interrupt-status state will correctly follow
-   each thread (mostly NMI vs. normal-IRQ/trap), though for the most part
-   it doesn't matter since threads are always in almost exactly the same
-   processor state during a context switch.  The stack pointer and return
-   value are handled by switch_thread itself.  */
-#define SWITCH_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_PSW(PSW);							      \
-	SAVE_CT_REGS
-#define SWITCH_STATE_RESTORER						      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_PSW(PSW);						      \
-	RESTORE_CT_REGS
-
-
-/* Restore register state from the state-save-frame on the stack, switch back
-   to the user stack if necessary, and return from the trap/interrupt.
-   EXTRA_STATE_RESTORER is a sequence of assembly language statements to
-   restore anything not restored by this macro.  Only registers not saved by
-   the C compiler are restored (that is, R3(sp), R4(gp), R31(lp), and
-   anything restored by EXTRA_STATE_RESTORER).  */
-#define RETURN(type)							      \
-	ld.b	PTO+PT_KERNEL_MODE[sp], r19;				      \
-	di;				/* Disable interrupts */	      \
-	cmp	r19, r0;		/* See if returning to kernel mode, */\
-	bne	2f;			/* ... if so, skip resched &c.  */    \
-									      \
-	/* We're returning to user mode, so check for various conditions that \
-	   trigger rescheduling. */					      \
-	GET_CURRENT_THREAD(r18);					      \
-	ld.w	TI_FLAGS[r18], r19;					      \
-	andi	_TIF_NEED_RESCHED, r19, r0;				      \
-	bnz	3f;			/* Call the scheduler.  */	      \
-5:	andi	_TIF_SIGPENDING, r19, r18;				      \
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19; /* ptrace flags */	      \
-	or	r18, r19;		/* see if either is non-zero */	      \
-	bnz	4f;			/* if so, handle them */	      \
-									      \
-/* Return to user state.  */						      \
-1:	st.b	r0, KM;			/* Now officially in user state. */   \
-									      \
-/* Final return.  The stack-pointer fiddling is not needed when returning     \
-   to kernel-mode, but they don't hurt, and this way we can share the	      \
-   (sometimes rather lengthy) POP_STATE macro.  */			      \
-2:	POP_STATE(type);						      \
-	st.w	sp, KSP;		/* Save the kernel stack pointer. */  \
-	ld.w	PT_GPR(GPR_SP)-PT_SIZE[sp], sp; /* Restore stack pointer. */  \
-	type ## _RET;			/* Return from the trap/interrupt. */ \
-									      \
-/* Call the scheduler before returning from a syscall/trap. */		      \
-3:	SAVE_EXTRA_STATE_FOR_SCHEDULE(type); /* Prepare to call scheduler. */ \
-	jarl	call_scheduler, lp;	/* Call scheduler */		      \
-	di;				/* The scheduler enables interrupts */\
-	RESTORE_EXTRA_STATE_FOR_SCHEDULE(type);				      \
-	GET_CURRENT_THREAD(r18);					      \
-	ld.w	TI_FLAGS[r18], r19;					      \
-	br	5b;			/* Continue with return path. */      \
-									      \
-/* Handle a signal or ptraced process return.				      \
-   r18 should be non-zero if there are pending signals.  */		      \
-4:	/* Not all registers are saved by the normal trap/interrupt entry     \
-	   points (for instance, call-saved registers (because the normal     \
-	   C-compiler calling sequence in the kernel makes sure they're	      \
-	   preserved), and call-clobbered registers in the case of	      \
-	   traps), but signal handlers may want to examine or change the      \
-	   complete register state.  Here we save anything not saved by	      \
-	   the normal entry sequence, so that it may be safely restored	      \
-	   (in a possibly modified form) after do_signal returns.  */	      \
-	SAVE_EXTRA_STATE(type);		/* Save state not saved by entry. */  \
-	jarl	handle_signal_or_ptrace_return, lp;			      \
-	RESTORE_EXTRA_STATE(type);	/* Restore extra regs.  */	      \
-	br	1b
-
-
-/* Jump to the appropriate function for the system call number in r12
-   (r12 is not preserved), or return an error if r12 is not valid.  The
-   LP register should point to the location where the called function
-   should return.  [note that MAKE_SYS_CALL uses label 1]  */
-#define MAKE_SYS_CALL							      \
-	/* Figure out which function to use for this system call.  */	      \
-	shl	2, r12;							      \
-	/* See if the system call number is valid.  */			      \
-	addi	lo(CSYM(sys_call_table) - sys_call_table_end), r12, r0;	      \
-	bnh	1f;							      \
-	mov	hilo(CSYM(sys_call_table)), r19;			      \
-	add	r19, r12;						      \
-	ld.w	0[r12], r12;						      \
-	/* Make the system call.  */					      \
-	jmp	[r12];							      \
-	/* The syscall number is invalid, return an error.  */		      \
-1:	addi	-ENOSYS, r0, r10;					      \
-	jmp	[lp]
-
-
-	.text
-
-/*
- * User trap.
- *
- * Trap 0 system calls are also handled here.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- *
- * Syscall protocol:
- *   Syscall number in r12, args in r6-r9
- *   Return value in r10
- */
-G_ENTRY(trap):
-	SAVE_STATE (TRAP, r12, ENTRY_SP) // Save registers.
-	stsr	SR_ECR, r19		// Find out which trap it was.
-	ei				// Enable interrupts.
-	mov	hilo(ret_from_trap), lp	// where the trap should return
-
-	// The following two shifts (1) clear out extraneous NMI data in the
-	// upper 16-bits, (2) convert the 0x40 - 0x5f range of trap ECR
-	// numbers into the (0-31) << 2 range we want, (3) set the flags.
-	shl	27, r19			// chop off all high bits
-	shr	25, r19			// scale back down and then << 2
-	bnz	2f			// See if not trap 0.
-
-	// Trap 0 is a `short' system call, skip general trap table.
-	MAKE_SYS_CALL			// Jump to the syscall function.
-
-2:	// For other traps, use a table lookup.
-	mov	hilo(CSYM(trap_table)), r18
-	add	r19, r18
-	ld.w	0[r18], r18
-	jmp	[r18]			// Jump to the trap handler.
-END(trap)
-
-/* This is just like ret_from_trap, but first restores extra registers
-   saved by some wrappers.  */
-L_ENTRY(restore_extra_regs_and_ret_from_trap):
-	RESTORE_EXTRA_STATE(TRAP)
-	// fall through
-END(restore_extra_regs_and_ret_from_trap)
-
-/* Entry point used to return from a syscall/trap.  */
-L_ENTRY(ret_from_trap):
-	RETURN(TRAP)
-END(ret_from_trap)
-
-
-/* This the initial entry point for a new child thread, with an appropriate
-   stack in place that makes it look that the child is in the middle of an
-   syscall.  This function is actually `returned to' from switch_thread
-   (copy_thread makes ret_from_fork the return address in each new thread's
-   saved context).  */
-C_ENTRY(ret_from_fork):
-	mov	r10, r6			// switch_thread returns the prev task.
-	jarl	CSYM(schedule_tail), lp	// ...which is schedule_tail's arg
-	mov	r0, r10			// Child's fork call should return 0.
-	br	ret_from_trap		// Do normal trap return.
-C_END(ret_from_fork)
-
-
-/*
- * Trap 1: `long' system calls
- * `Long' syscall protocol:
- *   Syscall number in r12, args in r6-r9, r13-r14
- *   Return value in r10
- */
-L_ENTRY(syscall_long):
-	// Push extra arguments on the stack.  Note that by default, the trap
-	// handler reserves enough stack space for 6 arguments, so we don't
-	// have to make any additional room.
-	st.w	r13, 16[sp]		// arg 5
-	st.w	r14, 20[sp]		// arg 6
-
-	// Make sure r13 and r14 are preserved, in case we have to restart a
-	// system call because of a signal (ep has already been set by caller).
-	st.w	r13, PTO+PT_GPR(13)[sp]
-	st.w	r14, PTO+PT_GPR(13)[sp]
-	mov	hilo(ret_from_long_syscall), lp
-
-	MAKE_SYS_CALL			// Jump to the syscall function.
-END(syscall_long)
-
-/* Entry point used to return from a long syscall.  Only needed to restore
-   r13/r14 if the general trap mechanism doesnt' do so.  */
-L_ENTRY(ret_from_long_syscall):
-	ld.w	PTO+PT_GPR(13)[sp], r13 // Restore the extra registers
-	ld.w	PTO+PT_GPR(13)[sp], r14
-	br	ret_from_trap		// The rest is the same as other traps
-END(ret_from_long_syscall)
-
-
-/* These syscalls need access to the struct pt_regs on the stack, so we
-   implement them in assembly (they're basically all wrappers anyway).  */
-
-L_ENTRY(sys_fork_wrapper):
-#ifdef CONFIG_MMU
-	addi	SIGCHLD, r0, r6		   // Arg 0: flags
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-#else
-	// fork almost works, enough to trick you into looking elsewhere :-(
-	addi	-EINVAL, r0, r10
-	jmp	[lp]
-#endif
-END(sys_fork_wrapper)
-
-L_ENTRY(sys_vfork_wrapper):
-	addi	CLONE_VFORK | CLONE_VM | SIGCHLD, r0, r6 // Arg 0: flags
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-END(sys_vfork_wrapper)
-
-L_ENTRY(sys_clone_wrapper):
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r19// parent's stack pointer
-	cmp	r7, r0			   // See if child SP arg (arg 1) is 0.
-	cmov	z, r19, r7, r7		   // ... and use the parent's if so.
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-END(sys_clone_wrapper)
-
-
-L_ENTRY(sys_execve_wrapper):
-	movea	PTO, sp, r9		// add user context as 4th arg
-	jr	CSYM(sys_execve)	// Do real work (tail-call).
-END(sys_execve_wrapper)
-
-
-L_ENTRY(sys_sigsuspend_wrapper):
-	movea	PTO, sp, r7		// add user context as 2nd arg
-	mov	hilo(CSYM(sys_sigsuspend)), r18	// syscall function
-	jarl	save_extra_state_tramp, lp	// Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_sigsuspend_wrapper)
-L_ENTRY(sys_rt_sigsuspend_wrapper):
-	movea	PTO, sp, r8		// add user context as 3rd arg
-	mov	hilo(CSYM(sys_rt_sigsuspend)), r18 // syscall function
-	jarl	save_extra_state_tramp, lp	   // Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigsuspend_wrapper)
-
-L_ENTRY(sys_sigreturn_wrapper):
-	movea	PTO, sp, r6		// add user context as 1st arg
-	mov	hilo(CSYM(sys_sigreturn)), r18	// syscall function
-	jarl	save_extra_state_tramp, lp	// Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_sigreturn_wrapper)
-L_ENTRY(sys_rt_sigreturn_wrapper):
-	movea	PTO, sp, r6		// add user context as 1st arg
-	mov	hilo(CSYM(sys_rt_sigreturn)), r18// syscall function
-	jarl	save_extra_state_tramp, lp	 // Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigreturn_wrapper)
-
-
-/* Save any state not saved by SAVE_STATE(TRAP), and jump to r18.
-   It's main purpose is to share the rather lengthy code sequence that
-   SAVE_STATE expands into among the above wrapper functions.  */
-L_ENTRY(save_extra_state_tramp):
-	SAVE_EXTRA_STATE(TRAP)		// Save state not saved by entry.
-	jmp	[r18]			// Do the work the caller wants
-END(save_extra_state_tramp)
-
-
-/*
- * Hardware maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(irq):
-	SAVE_STATE (IRQ, r0, ENTRY_SP)	// Save registers.
-
-	stsr	SR_ECR, r6		// Find out which interrupt it was.
-	movea	PTO, sp, r7		// User regs are arg2
-
-	// All v850 implementations I know about encode their interrupts as
-	// multiples of 0x10, starting at 0x80 (after NMIs and software
-	// interrupts).  Convert this number into a simple IRQ index for the
-	// rest of the kernel.  We also clear the upper 16 bits, which hold
-	// NMI info, and don't appear to be cleared when a NMI returns.
-	shl	16, r6			// clear upper 16 bits
-	shr	20, r6			// shift back, and remove lower nibble
-	add	-8, r6			// remove bias for irqs
-
-	// Call the high-level interrupt handling code.
-	jarl	CSYM(handle_irq), lp
-
-	RETURN(IRQ)
-END(irq)
-
-
-/*
- * Debug trap / illegal-instruction exception
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(dbtrap):
-	SAVE_STATE (DBTRAP, r0, ENTRY_SP)// Save registers.
-
-	/* First see if we came from kernel mode; if so, the dbtrap
-	   instruction has a special meaning, to set the DIR (`debug
-	   information register') register.  This is because the DIR register
-	   can _only_ be manipulated/read while in `debug mode,' and debug
-	   mode is only active while we're inside the dbtrap handler.  The
-	   exact functionality is:  { DIR = (DIR | r6) & ~r7; return DIR; }. */
-	ld.b	PTO+PT_KERNEL_MODE[sp], r19
-	cmp	r19, r0
-	bz	1f
-
-	stsr	SR_DIR, r10
-	or	r6, r10
-	not	r7, r7
-	and	r7, r10
-	ldsr	r10, SR_DIR
-	stsr	SR_DIR, r10		// Confirm the value we set
-	st.w	r10, PTO+PT_GPR(10)[sp]	// return it
-	br	3f
-
-1:	ei				// Enable interrupts.
-
-	/* The default signal type we raise.  */
-	mov	SIGTRAP, r6
-
-	/* See if it's a single-step trap.  */
-	stsr	SR_DBPSW, r19
-	andi	0x0800, r19, r19
-	bnz	2f
-
-	/* Look to see if the preceding instruction was is a dbtrap or not,
-	   to decide which signal we should use.  */
-	stsr	SR_DBPC, r19		// PC following trapping insn
-	ld.hu	-2[r19], r19
-	ori	0xf840, r0, r20		// DBTRAP insn
-	cmp	r19, r20		// Was this trap caused by DBTRAP?
-	cmov	ne, SIGILL, r6, r6	// Choose signal appropriately
-
-	/* Raise the desired signal.  */
-2:	mov	CURRENT_TASK, r7	// Arg 1: task
-	jarl	CSYM(send_sig), lp	// tail call
-
-3:	RETURN(DBTRAP)
-END(dbtrap)
-
-
-/*
- * Hardware non-maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(nmi):
-	SAVE_STATE (NMI, r0, NMI_ENTRY_SP); /* Save registers.  */
-
-	stsr	SR_ECR, r6;		/* Find out which nmi it was.  */
-	shr	20, r6;			/* Extract NMI code in bits 20-24. */
-	movea	PTO, sp, r7;		/* User regs are arg2.  */
-
-	/* Non-maskable interrupts always lie right after maskable interrupts.
-	   Call the generic IRQ handler, with two arguments, the IRQ number,
-	   and a pointer to the user registers, to handle the specifics.
-	   (we subtract one because the first NMI has code 1).  */
-	addi	FIRST_NMI - 1, r6, r6
-	jarl	CSYM(handle_irq), lp
-
-	RETURN(NMI)
-END(nmi)
-
-
-/*
- * Trap with no handler
- */
-L_ENTRY(bad_trap_wrapper):
-	mov	r19, r6			// Arg 0: trap number
-	movea	PTO, sp, r7		// Arg 1: user regs
-	jr	CSYM(bad_trap)		// tail call handler
-END(bad_trap_wrapper)
-
-
-/*
- * Invoke the scheduler, called from the trap/irq kernel exit path.
- *
- * This basically just calls `schedule', but also arranges for extra
- * registers to be saved for ptrace'd processes, so ptrace can modify them.
- */
-L_ENTRY(call_scheduler):
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19	// See if task is ptrace'd
-	cmp	r19, r0
-	bnz	1f			// ... yes, do special stuff
-	jr	CSYM(schedule)		// ... no, just tail-call scheduler
-
-	// Save extra regs for ptrace'd task.  We want to save anything
-	// that would otherwise only be `implicitly' saved by the normal
-	// compiler calling-convention.
-1:	mov	sp, ep			// Setup EP for SAVE_CALL_SAVED_REGS
-	SAVE_CALL_SAVED_REGS		// Save call-saved registers to stack
-	mov	lp, r20			// Save LP in a callee-saved register
-
-	jarl	CSYM(schedule), lp	// Call scheduler
-
-	mov	r20, lp
-	mov	sp, ep			// We can't rely on EP after return
-	RESTORE_CALL_SAVED_REGS		// Restore (possibly modified) regs
-	jmp	[lp]			// Return to the return path
-END(call_scheduler)
-
-
-/*
- * This is an out-of-line handler for two special cases during the kernel
- * trap/irq exit sequence:
- *
- *  (1) If r18 is non-zero then a signal needs to be handled, which is
- *	done, and then the caller returned to.
- *
- *  (2) If r18 is non-zero then we're returning to a ptraced process, which
- *	has several special cases -- single-stepping and trap tracing, both
- *	of which require using the `dbret' instruction to exit the kernel
- *	instead of the normal `reti' (this is because the CPU not correctly
- *	single-step after a reti).  In this case, of course, this handler
- *	never returns to the caller.
- *
- * In either case, all registers should have been saved to the current
- * state-save-frame on the stack, except for callee-saved registers.
- *
- * [These two different cases are combined merely to avoid bloating the
- * macro-inlined code, not because they really make much sense together!]
- */
-L_ENTRY(handle_signal_or_ptrace_return):
-	cmp	r18, r0			// See if handling a signal
-	bz	1f			// ... nope, go do ptrace return
-
-	// Handle a signal
-	mov	lp, r20			// Save link-pointer
-	mov	r10, r21		// Save return-values (for trap)
-	mov	r11, r22
-
-	movea	PTO, sp, r6		// Arg 1: struct pt_regs *regs
-	mov	r0, r7			// Arg 2: sigset_t *oldset
-	jarl	CSYM(do_signal), lp	// Handle the signal
-	di				// sig handling enables interrupts
-
-	mov	r20, lp			// Restore link-pointer
-	mov	r21, r10		// Restore return-values (for trap)
-	mov	r22, r11
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19  // check ptrace flags too
-	cmp	r19, r0
-	bnz	1f			// ... some set, so look more
-2:	jmp	[lp]			// ... none set, so return normally
-
-	// ptrace return
-1:	ld.w	PTO+PT_PSW[sp], r19	// Look at user-processes's flags
-	andi	0x0800, r19, r19	// See if single-step flag is set
-	bz	2b			// ... nope, return normally
-
-	// Return as if from a dbtrap insn
-	st.b	r0, KM			// Now officially in user state.
-	POP_STATE(DBTRAP)		// Restore regs
-	st.w	sp, KSP			// Save the kernel stack pointer.
-	ld.w	PT_GPR(GPR_SP)-PT_SIZE[sp], sp // Restore user stack pointer.
-	DBTRAP_RET			// Return from the trap/interrupt.
-END(handle_signal_or_ptrace_return)
-
-
-/*
- * This is where we switch between two threads.  The arguments are:
- *   r6 -- pointer to the struct thread for the `current' process
- *   r7 -- pointer to the struct thread for the `new' process.
- * when this function returns, it will return to the new thread.
- */
-C_ENTRY(switch_thread):
-	// Return the previous task (r10 is not clobbered by restore below)
-	mov	CURRENT_TASK, r10
-	// First, push the current processor state on the stack
-	PUSH_STATE(SWITCH)
-	// Now save the location of the kernel stack pointer for this thread;
-	// since we've pushed all other state on the stack, this is enough to
-	// restore it all later.
-	st.w	sp, THREAD_KSP[r6]
-	// Now restore the stack pointer from the new process
-	ld.w	THREAD_KSP[r7], sp
-	// ... and restore all state from that
-	POP_STATE(SWITCH)
-	// Update the current task pointer
-	GET_CURRENT_TASK(CURRENT_TASK)
-	// Now return into the new thread
-	jmp	[lp]
-C_END(switch_thread)
-
-
-	.data
-
-	.align 4
-C_DATA(trap_table):
-	.long bad_trap_wrapper		// trap 0, doesn't use trap table.
-	.long syscall_long		// trap 1, `long' syscall.
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-C_END(trap_table)
-
-
-	.section .rodata
-
-	.align 4
-C_DATA(sys_call_table):
-	.long CSYM(sys_restart_syscall)	// 0
-	.long CSYM(sys_exit)
-	.long sys_fork_wrapper
-	.long CSYM(sys_read)
-	.long CSYM(sys_write)
-	.long CSYM(sys_open)		// 5
-	.long CSYM(sys_close)
-	.long CSYM(sys_waitpid)
-	.long CSYM(sys_creat)
-	.long CSYM(sys_link)
-	.long CSYM(sys_unlink)		// 10
-	.long sys_execve_wrapper
-	.long CSYM(sys_chdir)
-	.long CSYM(sys_time)
-	.long CSYM(sys_mknod)
-	.long CSYM(sys_chmod)		// 15
-	.long CSYM(sys_chown)
-	.long CSYM(sys_ni_syscall)	// was: break
-	.long CSYM(sys_ni_syscall)	// was: oldstat (aka stat)
-	.long CSYM(sys_lseek)
-	.long CSYM(sys_getpid)		// 20
-	.long CSYM(sys_mount)
-	.long CSYM(sys_oldumount)
-	.long CSYM(sys_setuid)
-	.long CSYM(sys_getuid)
-	.long CSYM(sys_stime)		// 25
-	.long CSYM(sys_ptrace)
-	.long CSYM(sys_alarm)
-	.long CSYM(sys_ni_syscall)	// was: oldfstat (aka fstat)
-	.long CSYM(sys_pause)
-	.long CSYM(sys_utime)		// 30
-	.long CSYM(sys_ni_syscall)	// was: stty
-	.long CSYM(sys_ni_syscall)	// was: gtty
-	.long CSYM(sys_access)
-	.long CSYM(sys_nice)
-	.long CSYM(sys_ni_syscall)	// 35, was: ftime
-	.long CSYM(sys_sync)
-	.long CSYM(sys_kill)
-	.long CSYM(sys_rename)
-	.long CSYM(sys_mkdir)
-	.long CSYM(sys_rmdir)		// 40
-	.long CSYM(sys_dup)
-	.long CSYM(sys_pipe)
-	.long CSYM(sys_times)
-	.long CSYM(sys_ni_syscall)	// was: prof
-	.long CSYM(sys_brk)		// 45
-	.long CSYM(sys_setgid)
-	.long CSYM(sys_getgid)
-	.long CSYM(sys_signal)
-	.long CSYM(sys_geteuid)
-	.long CSYM(sys_getegid)		// 50
-	.long CSYM(sys_acct)
-	.long CSYM(sys_umount)		// recycled never used phys()
-	.long CSYM(sys_ni_syscall)	// was: lock
-	.long CSYM(sys_ioctl)
-	.long CSYM(sys_fcntl)		// 55
-	.long CSYM(sys_ni_syscall)	// was: mpx
-	.long CSYM(sys_setpgid)
-	.long CSYM(sys_ni_syscall)	// was: ulimit
-	.long CSYM(sys_ni_syscall)
-	.long CSYM(sys_umask)		// 60
-	.long CSYM(sys_chroot)
-	.long CSYM(sys_ustat)
-	.long CSYM(sys_dup2)
-	.long CSYM(sys_getppid)
-	.long CSYM(sys_getpgrp)		// 65
-	.long CSYM(sys_setsid)
-	.long CSYM(sys_sigaction)
-	.long CSYM(sys_sgetmask)
-	.long CSYM(sys_ssetmask)
-	.long CSYM(sys_setreuid)	// 70
-	.long CSYM(sys_setregid)
-	.long sys_sigsuspend_wrapper
-	.long CSYM(sys_sigpending)
-	.long CSYM(sys_sethostname)
-	.long CSYM(sys_setrlimit)	// 75
-	.long CSYM(sys_getrlimit)
-	.long CSYM(sys_getrusage)
-	.long CSYM(sys_gettimeofday)
-	.long CSYM(sys_settimeofday)
-	.long CSYM(sys_getgroups)	// 80
-	.long CSYM(sys_setgroups)
-	.long CSYM(sys_select)
-	.long CSYM(sys_symlink)
-	.long CSYM(sys_ni_syscall)	// was: oldlstat (aka lstat)
-	.long CSYM(sys_readlink)	// 85
-	.long CSYM(sys_uselib)
-	.long CSYM(sys_swapon)
-	.long CSYM(sys_reboot)
-	.long CSYM(old_readdir)
-	.long CSYM(sys_mmap)		// 90
-	.long CSYM(sys_munmap)
-	.long CSYM(sys_truncate)
-	.long CSYM(sys_ftruncate)
-	.long CSYM(sys_fchmod)
-	.long CSYM(sys_fchown)		// 95
-	.long CSYM(sys_getpriority)
-	.long CSYM(sys_setpriority)
-	.long CSYM(sys_ni_syscall)	// was: profil
-	.long CSYM(sys_statfs)
-	.long CSYM(sys_fstatfs)		// 100
-	.long CSYM(sys_ni_syscall)	// i386: ioperm
-	.long CSYM(sys_socketcall)
-	.long CSYM(sys_syslog)
-	.long CSYM(sys_setitimer)
-	.long CSYM(sys_getitimer)	// 105
-	.long CSYM(sys_newstat)
-	.long CSYM(sys_newlstat)
-	.long CSYM(sys_newfstat)
-	.long CSYM(sys_ni_syscall)	// was: olduname (aka uname)
-	.long CSYM(sys_ni_syscall)	// 110, i386: iopl
-	.long CSYM(sys_vhangup)
-	.long CSYM(sys_ni_syscall)	// was: idle
-	.long CSYM(sys_ni_syscall)	// i386: vm86old
-	.long CSYM(sys_wait4)
-	.long CSYM(sys_swapoff)		// 115
-	.long CSYM(sys_sysinfo)
-	.long CSYM(sys_ipc)
-	.long CSYM(sys_fsync)
-	.long sys_sigreturn_wrapper
-	.long sys_clone_wrapper		// 120
-	.long CSYM(sys_setdomainname)
-	.long CSYM(sys_newuname)
-	.long CSYM(sys_ni_syscall)	// i386: modify_ldt, m68k: cacheflush
-	.long CSYM(sys_adjtimex)
-	.long CSYM(sys_ni_syscall)	// 125 - sys_mprotect
-	.long CSYM(sys_sigprocmask)
-	.long CSYM(sys_ni_syscall)	// sys_create_module
-	.long CSYM(sys_init_module)
-	.long CSYM(sys_delete_module)
-	.long CSYM(sys_ni_syscall)	// 130 - sys_get_kernel_syms
-	.long CSYM(sys_quotactl)
-	.long CSYM(sys_getpgid)
-	.long CSYM(sys_fchdir)
-	.long CSYM(sys_bdflush)
-	.long CSYM(sys_sysfs)		// 135
-	.long CSYM(sys_personality)
-	.long CSYM(sys_ni_syscall)	// for afs_syscall
-	.long CSYM(sys_setfsuid)
-	.long CSYM(sys_setfsgid)
-	.long CSYM(sys_llseek)		// 140
-	.long CSYM(sys_getdents)
-	.long CSYM(sys_select)		// for backward compat; remove someday
-	.long CSYM(sys_flock)
-	.long CSYM(sys_ni_syscall)	// sys_msync
-	.long CSYM(sys_readv)		// 145
-	.long CSYM(sys_writev)
-	.long CSYM(sys_getsid)
-	.long CSYM(sys_fdatasync)
-	.long CSYM(sys_sysctl)
-	.long CSYM(sys_ni_syscall)	// 150 - sys_mlock
-	.long CSYM(sys_ni_syscall)	// sys_munlock
-	.long CSYM(sys_ni_syscall)	// sys_mlockall
-	.long CSYM(sys_ni_syscall)	// sys_munlockall
-	.long CSYM(sys_sched_setparam)
-	.long CSYM(sys_sched_getparam)	// 155
-	.long CSYM(sys_sched_setscheduler)
-	.long CSYM(sys_sched_getscheduler)
-	.long CSYM(sys_sched_yield)
-	.long CSYM(sys_sched_get_priority_max)
-	.long CSYM(sys_sched_get_priority_min)	// 160
-	.long CSYM(sys_sched_rr_get_interval)
-	.long CSYM(sys_nanosleep)
-	.long CSYM(sys_ni_syscall)	// sys_mremap
-	.long CSYM(sys_setresuid)
-	.long CSYM(sys_getresuid)	// 165
-	.long CSYM(sys_ni_syscall)	// for vm86
-	.long CSYM(sys_ni_syscall)	// sys_query_module
-	.long CSYM(sys_poll)
-	.long CSYM(sys_nfsservctl)
-	.long CSYM(sys_setresgid)	// 170
-	.long CSYM(sys_getresgid)
-	.long CSYM(sys_prctl)
-	.long sys_rt_sigreturn_wrapper
-	.long CSYM(sys_rt_sigaction)
-	.long CSYM(sys_rt_sigprocmask)	// 175
-	.long CSYM(sys_rt_sigpending)
-	.long CSYM(sys_rt_sigtimedwait)
-	.long CSYM(sys_rt_sigqueueinfo)
-	.long sys_rt_sigsuspend_wrapper
-	.long CSYM(sys_pread64)		// 180
-	.long CSYM(sys_pwrite64)
-	.long CSYM(sys_lchown)
-	.long CSYM(sys_getcwd)
-	.long CSYM(sys_capget)
-	.long CSYM(sys_capset)		// 185
-	.long CSYM(sys_sigaltstack)
-	.long CSYM(sys_sendfile)
-	.long CSYM(sys_ni_syscall)	// streams1
-	.long CSYM(sys_ni_syscall)	// streams2
-	.long sys_vfork_wrapper		// 190
-	.long CSYM(sys_ni_syscall)
-	.long CSYM(sys_mmap2)
-	.long CSYM(sys_truncate64)
-	.long CSYM(sys_ftruncate64)
-	.long CSYM(sys_stat64)		// 195
-	.long CSYM(sys_lstat64)
-	.long CSYM(sys_fstat64)
-	.long CSYM(sys_fcntl64)
-	.long CSYM(sys_getdents64)
-	.long CSYM(sys_pivot_root)	// 200
-	.long CSYM(sys_gettid)
-	.long CSYM(sys_tkill)
-sys_call_table_end:
-C_END(sys_call_table)
diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c
deleted file mode 100644
index ab9cf16a85c..00000000000
--- a/arch/v850/kernel/fpga85e2c.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
- *	FPGA implementation of V850E2/NA85E2C
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-extern void memcons_setup (void);
-
-
-#define REG_DUMP_ADDR		0x220000
-
-
-extern struct irqaction reg_snap_action; /* fwd decl */
-
-
-void __init mach_early_init (void)
-{
-	int i;
-	const u32 *src;
-	register u32 *dst asm ("ep");
-	extern u32 _intv_end, _intv_load_start;
-
-	/* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
-	   everything else 32-bit.  */
-	V850E2_BSC = 0x2AA6;
-	for (i = 2; i <= 6; i++)
-		CSDEV(i) = 0;	/* 32 bit */
-
-	/* Ensure that the simulator halts on a panic, instead of going
-	   into an infinite loop inside the panic function.  */
-	panic_timeout = -1;
-
-	/* Move the interrupt vectors into their real location.  Note that
-	   any relocations there are relative to the real location, so we
-	   don't have to fix anything up.  We use a loop instead of calling
-	   memcpy to keep this a leaf function (to avoid a function
-	   prologue being generated).  */
-	dst = 0x10;		/* &_intv_start + 0x10.  */
-	src = &_intv_load_start;
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
-		dst += 8;
-		src += 8;
-	} while (dst < &_intv_end);
-}
-
-void __init mach_setup (char **cmdline)
-{
-	memcons_setup ();
-
-	/* Setup up NMI0 to copy the registers to a known memory location.
-	   The FGPA board has a button that produces NMI0 when pressed, so
-	   this allows us to push the button, and then look at memory to see
-	   what's in the registers (there's no other way to easily do so).
-	   We have to use `setup_irq' instead of `request_irq' because it's
-	   still too early to do memory allocation.  */
-	setup_irq (IRQ_NMI (0), &reg_snap_action);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = ERAM_ADDR;
-	*ram_len = ERAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Setup up the timer interrupt.  The FPGA peripheral control
-	   registers _only_ work with single-bit writes (set1/clr1)!  */
-	__clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-	__clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
-	__set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-
-	/* We use the first RPU interrupt, which occurs every 8.192ms.  */
-	setup_irq (IRQ_RPU (0), timer_action);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-	for (;;) {
-		DWC(0) = 0x7777;
-		DWC(1) = 0x7777;
-		ASC = 0xffff;
-		FLGREG(0) = 1;	/* Halt immediately.  */
-		asm ("di; halt; nop; nop; nop; nop; nop");
-	}
-}
-
-void machine_restart (char *__unused)
-{
-	machine_halt ();
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "RPU", IRQ_RPU(0),	IRQ_RPU_NUM,	1, 6 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-/* An interrupt handler that copies the registers to a known memory location,
-   for debugging purposes.  */
-
-static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
-{
-	(*(unsigned *)REG_DUMP_ADDR)++;
-	(*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
-}
-
-static int reg_snap_dev_id;
-static struct irqaction reg_snap_action = {
-	.handler = make_reg_snap,
-	.mask = CPU_MASK_NONE,
-	.name = "reg_snap",
-	.dev_id = &reg_snap_dev_id,
-};
diff --git a/arch/v850/kernel/fpga85e2c.ld b/arch/v850/kernel/fpga85e2c.ld
deleted file mode 100644
index b5d4578ae41..00000000000
--- a/arch/v850/kernel/fpga85e2c.ld
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Linker script for the FPGA implementation of the V850E2 NA85E2C cpu core
-   (CONFIG_V850E2_FPGA85E2C).  */
-
-MEMORY {
-	/* Reset vector.  */
-	RESET	 : ORIGIN = 0, LENGTH = 0x10
-	/* Interrupt vectors.  */
-	INTV      : ORIGIN = 0x10, LENGTH = 0x470
-	/* The `window' in RAM were we're allowed to load stuff.  */
-	RAM_LOW   : ORIGIN = 0x480, LENGTH = 0x0005FB80
-	/* Some more ram above the window were we can put bss &c.  */
-	RAM_HIGH  : ORIGIN = 0x00060000, LENGTH = 0x000A0000
-	/* This is the area visible from the outside world (we can use
-	   this only for uninitialized data).  */
-	VISIBLE   : ORIGIN = 0x00200000, LENGTH = 0x00060000
-}
-
-SECTIONS {
-	.reset : {
-		__kram_start = . ;
-		__intv_start = . ;
-	        	*(.intv.reset)	/* Reset vector */
-	} > RESET
-
-	.ram_low : {
-		__r0_ram = . ;		/* Must be near address 0.  */
-		. = . + 32 ;
-
-		TEXT_CONTENTS
-		DATA_CONTENTS
-		ROOT_FS_CONTENTS
-		RAMK_INIT_CONTENTS_NO_END
-		INITRAMFS_CONTENTS
-	} > RAM_LOW
-
-        /* Where the interrupt vectors are initially loaded.  */
-	__intv_load_start = . ;
-
-	.intv : {
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		__intv_end = . ;
-	} > INTV  AT> RAM_LOW
-
-	.ram_high : {
-		/* This is here so that when we free init memory the
-		   load-time copy of the interrupt vectors and any empty
-		   space at the end of the `RAM_LOW' area is freed too.  */
-		. = ALIGN (4096);
-		__init_end = . ;
-
-		BSS_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-	} > RAM_HIGH
-
-	.visible : {
-		_memcons_output = . ;
-		. = . + 0x8000 ;
-		_memcons_output_end = . ;
-	} > VISIBLE
-}
diff --git a/arch/v850/kernel/gbus_int.c b/arch/v850/kernel/gbus_int.c
deleted file mode 100644
index b2bcc251f65..00000000000
--- a/arch/v850/kernel/gbus_int.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * arch/v850/kernel/gbus_int.c -- Midas labs GBUS interrupt support
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-
-/* The number of shared GINT interrupts. */
-#define NUM_GINTS   	4
-
-/* For each GINT interrupt, how many GBUS interrupts are using it.  */
-static unsigned gint_num_active_irqs[NUM_GINTS] = { 0 };
-
-/* A table of GINTn interrupts we actually use.
-   Note that we don't use GINT0 because all the boards we support treat it
-   specially.  */
-struct used_gint {
-	unsigned gint;
-	unsigned priority;
-} used_gint[] = {
-	{ 1, GBUS_INT_PRIORITY_HIGH },
-	{ 3, GBUS_INT_PRIORITY_LOW }
-};
-#define NUM_USED_GINTS ARRAY_SIZE(used_gint)
-
-/* A table of which GINT is used by each GBUS interrupts (they are
-   assigned based on priority).  */
-static unsigned char gbus_int_gint[IRQ_GBUS_INT_NUM];
-
-
-/* Interrupt enabling/disabling.  */
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void gbus_int_enable_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		|= GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `gbus_int_clear_pending_irq'.  */
-void gbus_int_disable_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		&= ~GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-int gbus_int_irq_enabled (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	return (GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		& GBUS_INT_IRQ_MASK(irq));
-}
-
-/* Disable all GBUS irqs.  */
-void gbus_int_disable_irqs ()
-{
-	unsigned w, n;
-	for (w = 0; w < GBUS_INT_NUM_WORDS; w++)
-		for (n = 0; n < IRQ_GINT_NUM; n++)
-			GBUS_INT_ENABLE (w, n) = 0;
-}
-
-/* Clear any pending interrupts for IRQ.  */
-void gbus_int_clear_pending_irq (unsigned irq)
-{
-	GBUS_INT_CLEAR (GBUS_INT_IRQ_WORD(irq)) = GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt IRQ is pending (but disabled).  */
-int gbus_int_irq_pending (unsigned irq)
-{
-	return (GBUS_INT_STATUS (GBUS_INT_IRQ_WORD(irq))
-		& GBUS_INT_IRQ_MASK(irq));
-}
-
-
-/* Delegating interrupts.  */
-
-/* Handle a shared GINT interrupt by passing to the appropriate GBUS
-   interrupt handler.  */
-static irqreturn_t gbus_int_handle_irq (int irq, void *dev_id,
-					struct pt_regs *regs)
-{
-	unsigned w;
-	irqreturn_t rval = IRQ_NONE;
-	unsigned gint = irq - IRQ_GINT (0);
-
-	for (w = 0; w < GBUS_INT_NUM_WORDS; w++) {
-		unsigned status = GBUS_INT_STATUS (w);
-		unsigned enable = GBUS_INT_ENABLE (w, gint);
-
-		/* Only pay attention to enabled interrupts.  */
-		status &= enable;
-		if (status) {
-			irq = IRQ_GBUS_INT (w * GBUS_INT_BITS_PER_WORD);
-			do {
-				/* There's an active interrupt in word
-				   W, find out which one, and call its
-				   handler.  */
-
-				while (! (status & 0x1)) {
-					irq++;
-					status >>= 1;
-				}
-				status &= ~0x1;
-
-				/* Recursively call handle_irq to handle it. */
-				handle_irq (irq, regs);
-				rval = IRQ_HANDLED;
-			} while (status);
-		}
-	}
-
-	/* Toggle the `all enable' bit back and forth, which should cause
-	   another edge transition if there are any other interrupts
-	   still pending, and so result in another CPU interrupt.  */
-	GBUS_INT_ENABLE (0, gint) &= ~0x1;
-	GBUS_INT_ENABLE (0, gint) |=  0x1;
-
-	return rval;
-}
-
-
-/* Initialize GBUS interrupt sources.  */
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned gbus_int_startup_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-	if (gint_num_active_irqs[gint] == 0) {
-		/* First enable the CPU interrupt.  */
-		int rval =
-			request_irq (IRQ_GINT(gint), gbus_int_handle_irq,
-				     IRQF_DISABLED,
-				     "gbus_int_handler",
-				     &gint_num_active_irqs[gint]);
-		if (rval != 0)
-			return rval;
-	}
-
-	gint_num_active_irqs[gint]++;
-
-	gbus_int_clear_pending_irq (irq);
-	gbus_int_enable_irq (irq);
-
-	return 0;
-}
-
-static void gbus_int_shutdown_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-	gbus_int_disable_irq (irq);
-
-	if (--gint_num_active_irqs[gint] == 0)
-		/* Disable the CPU interrupt.  */
-		free_irq (IRQ_GINT(gint), &gint_num_active_irqs[gint]);
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
-				     struct hw_interrupt_type *hw_irq_types)
-{
-	struct gbus_int_irq_init *init;
-	for (init = inits; init->name; init++) {
-		unsigned i;
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = gbus_int_startup_irq;
-		hwit->shutdown = gbus_int_shutdown_irq;
-		hwit->enable   = gbus_int_enable_irq;
-		hwit->disable  = gbus_int_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = irq_nop;
-		
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-		/* Set the interrupt priorities.  */
-		for (i = 0; i < init->num; i++) {
-			unsigned j;
-			for (j = 0; j < NUM_USED_GINTS; j++)
-				if (used_gint[j].priority > init->priority)
-					break;
-			/* Wherever we stopped looking is one past the
-			   GINT we want. */
-			gbus_int_gint[init->base + i * init->interval
-				      - GBUS_INT_BASE_IRQ]
-				= used_gint[j > 0 ? j - 1 : 0].gint;
-		}
-	}
-}
-
-
-/* Initialize IRQS.  */
-
-/* Chip interrupts (GINTn) shared among GBUS interrupts.  */
-static struct hw_interrupt_type gint_hw_itypes[NUM_USED_GINTS];
-
-
-/* GBUS interrupts themselves.  */
-
-struct gbus_int_irq_init gbus_irq_inits[] __initdata = {
-	/* First set defaults.  */
-	{ "GBUS_INT", IRQ_GBUS_INT(0), IRQ_GBUS_INT_NUM, 1, 6},
-	{ 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-
-/* Initialize GBUS interrupts.  */
-void __init gbus_int_init_irqs (void)
-{
-	unsigned i;
-
-	/* First initialize the shared gint interrupts.  */
-	for (i = 0; i < NUM_USED_GINTS; i++) {
-		unsigned gint = used_gint[i].gint;
-		struct v850e_intc_irq_init gint_irq_init[2];
-
-		/* We initialize one GINT interrupt at a time.  */
-		gint_irq_init[0].name = "GINT";
-		gint_irq_init[0].base = IRQ_GINT (gint);
-		gint_irq_init[0].num = 1;
-		gint_irq_init[0].interval = 1;
-		gint_irq_init[0].priority = used_gint[i].priority;
-
-		gint_irq_init[1].name = 0; /* Terminate the vector.  */
-
-		v850e_intc_init_irq_types (gint_irq_init, gint_hw_itypes);
-	}
-
-	/* Then the GBUS interrupts.  */
-	gbus_int_disable_irqs ();
-	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-	/* Turn on the `all enable' bits, which are ANDed with
-	   individual interrupt enable bits; we only want to bother with
-	   the latter.  They are the first bit in the first word of each
-	   interrupt-enable area.  */
-	for (i = 0; i < NUM_USED_GINTS; i++)
-		GBUS_INT_ENABLE (0, used_gint[i].gint) = 0x1;
-}
diff --git a/arch/v850/kernel/head.S b/arch/v850/kernel/head.S
deleted file mode 100644
index c490b937ef1..00000000000
--- a/arch/v850/kernel/head.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/v850/kernel/head.S -- Lowest-level startup code
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/current.h>
-#include <asm/entry.h>
-#include <asm/thread_info.h>
-#include <asm/irq.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM	C_SYMBOL_NAME
-
-
-	.text
-
-	// Define `mach_early_init' as a weak symbol
-	.global	CSYM(mach_early_init)
-	.weak	CSYM(mach_early_init)
-
-C_ENTRY(start):
-	// Make sure interrupts are turned off, just in case
-	di
-
-#ifdef CONFIG_RESET_GUARD
-	// See if we got here via an unexpected reset
-	ld.w	RESET_GUARD, r19	// Check current value of reset guard
-	mov	RESET_GUARD_ACTIVE, r20
-	cmp	r19, r20
-	bne	1f			// Guard was not active
-
-	// If we get here, the reset guard was active.  Load up some
-	// interesting values as arguments, and jump to the handler.
-	st.w	r0, RESET_GUARD		// Allow further resets to succeed
-	mov	lp, r6			// Arg 0: return address
-	ld.b	KM, r7			// Arg 1: kernel mode
-	mov	sp, r9			// Arg 3: stack pointer
-	ld.w	KSP, r19		// maybe switch to kernel stack
-	cmp	r7, r0			// see if already in kernel mode
-	cmov	z, r19, sp, sp		//  and switch to kernel stack if not
-	GET_CURRENT_TASK(r8)		// Arg 2: task pointer
-	jr	CSYM(unexpected_reset)
-
-1:	st.w	r20, RESET_GUARD	// Turn on reset guard
-#endif /* CONFIG_RESET_GUARD */
-
-	// Setup a temporary stack for doing pre-initialization function calls.
-	// 
-	// We can't use the initial kernel stack, because (1) it may be
-	// located in memory we're not allowed to touch, and (2) since
-	// it's in the data segment, calling memcpy to initialize that
-	// area from ROM will overwrite memcpy's return address.
-	mov	hilo(CSYM(_init_stack_end) - 4), sp
-
-	// See if there's a platform-specific early-initialization routine
-	// defined; it's a weak symbol, so it will have an address of zero if
-	// there's not.
-	mov	hilo(CSYM(mach_early_init)), r6
-	cmp	r6, r0
-	bz	3f
-
-	// There is one, so call it.  If this function is written in C, it
-	// should be very careful -- the stack pointer is valid, but very
-	// little else is (e.g., bss is not zeroed yet, and initialized data
-	// hasn't been).
-	jarl	2f, lp			// first figure out return address
-2:	add	3f - ., lp
-	jmp	[r6]			// do call
-3:
-
-#ifdef CONFIG_ROM_KERNEL
-	// Copy the data area from ROM to RAM
-	mov	hilo(CSYM(_rom_copy_dst_start)), r6
-	mov	hilo(CSYM(_rom_copy_src_start)), r7
-	mov	hilo(CSYM(_rom_copy_dst_end)), r8
-	sub	r6, r8
-	jarl	CSYM(memcpy), lp
-#endif
-
-	// Load the initial thread's stack, and current task pointer (in r16)
-	mov	hilo(CSYM(init_thread_union)), r19
-	movea	THREAD_SIZE, r19, sp
-	ld.w	TI_TASK[r19], CURRENT_TASK
-
-#ifdef CONFIG_TIME_BOOTUP
-	/* This stuff must come after mach_early_init, because interrupts may
-	   not work until after its been called.  */
-	jarl	CSYM(highres_timer_reset), lp
-	jarl	CSYM(highres_timer_start), lp
-#endif
-
-	// Kernel stack pointer save location
-	st.w	sp, KSP
-
-	// Assert that we're in `kernel mode'
-	mov	1, r19
-	st.w	r19, KM
-
-#ifdef CONFIG_ZERO_BSS
-	// Zero bss area, since we can't rely upon any loader to do so
-	mov	hilo(CSYM(_sbss)), r6
-	mov	r0, r7
-	mov	hilo(CSYM(_ebss)), r8
-	sub	r6, r8
-	jarl	CSYM(memset), lp
-#endif
-
-	// What happens if the main kernel function returns (it shouldn't)
-	mov	hilo(CSYM(machine_halt)), lp
-
-	// Start the linux kernel.  We use an indirect jump to get extra
-	// range, because on some platforms this initial startup code
-	// (and the associated platform-specific code in mach_early_init)
-	// are located far away from the main kernel, e.g. so that they
-	// can initialize RAM first and copy the kernel or something.
-	mov	hilo(CSYM(start_kernel)), r12
-	jmp	[r12]
-C_END(start)
diff --git a/arch/v850/kernel/highres_timer.c b/arch/v850/kernel/highres_timer.c
deleted file mode 100644
index b16ad1eaf96..00000000000
--- a/arch/v850/kernel/highres_timer.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/v850/kernel/highres_timer.c -- High resolution timing routines
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/system.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/highres_timer.h>
-
-#define HIGHRES_TIMER_USEC_SHIFT   12
-
-/* Pre-calculated constant used for converting ticks to real time
-   units.  We initialize it to prevent it being put into BSS.  */
-static u32 highres_timer_usec_prescale = 1;
-
-void highres_timer_slow_tick_irq (void) __attribute__ ((noreturn));
-void highres_timer_slow_tick_irq (void)
-{
-	/* This is an interrupt handler, so it must be very careful to
-	   not to trash any registers.  At this point, the stack-pointer
-	   (r3) has been saved in the chip ram location ENTRY_SP by the
-	   interrupt vector, so we can use it as a scratch register; we
-	   must also restore it before returning.  */
-	asm ("ld.w	%0[r0], sp;"
-	     "add	1, sp;"
-	     "st.w	sp, %0[r0];"
-	     "ld.w	%1[r0], sp;" /* restore pre-irq stack-pointer */
-	     "reti"
-	     ::
-	      "i" (HIGHRES_TIMER_SLOW_TICKS_ADDR),
-	      "i" (ENTRY_SP_ADDR)
-	     : "memory");
-}
-
-void highres_timer_reset (void)
-{
-	V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT) = 0;
-	HIGHRES_TIMER_SLOW_TICKS = 0;
-}
-
-void highres_timer_start (void)
-{
-	u32 fast_tick_rate;
-
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (HIGHRES_TIMER_TIMER_D_UNIT,
-				 HIGHRES_TIMER_SLOW_TICK_RATE);
-
-	fast_tick_rate =
-		(V850E_TIMER_D_BASE_FREQ
-		 >> V850E_TIMER_D_DIVLOG2 (HIGHRES_TIMER_TIMER_D_UNIT));
-
-	/* The obvious way of calculating microseconds from fast ticks
-	   is to do:
-
-	     usec = fast_ticks * 10^6 / fast_tick_rate
-
-	   However, divisions are much slower than multiplications, and
-	   the above calculation can overflow, so we do this instead:
-
-	     usec = fast_ticks * (10^6 * 2^12 / fast_tick_rate) / 2^12
-
-           since we can pre-calculate (10^6 * (2^12 / fast_tick_rate))
-	   and use a shift for dividing by 2^12, this avoids division,
-	   and is almost as accurate (it differs by about 2 microseconds
-	   at the extreme value of the fast-tick counter's ranger).  */
-	highres_timer_usec_prescale = ((1000000 << HIGHRES_TIMER_USEC_SHIFT)
-				       / fast_tick_rate);
-
-	/* Enable the interrupt (which is hardwired to this use), and
-	   give it the highest priority.  */
-	V850E_INTC_IC (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)) = 0;
-}
-
-void highres_timer_stop (void)
-{
-	/* Stop the timer.  */
-	V850E_TIMER_D_TMCD (HIGHRES_TIMER_TIMER_D_UNIT) =
-		V850E_TIMER_D_TMCD_CAE;
-	/* Disable its interrupt, just in case.  */
-	v850e_intc_disable_irq (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT));
-}
-
-inline void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks)
-{
-	int flags;
-	u32 fast_ticks_1, fast_ticks_2, _slow_ticks;
-
-	local_irq_save (flags);
-	fast_ticks_1 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-	_slow_ticks = HIGHRES_TIMER_SLOW_TICKS;
-	fast_ticks_2 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-	local_irq_restore (flags);
-
-	if (fast_ticks_2 < fast_ticks_1)
-		_slow_ticks++;
-
-	*slow_ticks = _slow_ticks;
-	*fast_ticks = fast_ticks_2;
-}
-
-inline void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
-					    struct timeval *tv)
-{
-	unsigned long sec, sec_rem, usec;
-
-	usec = ((fast_ticks * highres_timer_usec_prescale)
-		>> HIGHRES_TIMER_USEC_SHIFT);
-
-	sec = slow_ticks / HIGHRES_TIMER_SLOW_TICK_RATE;
-	sec_rem = slow_ticks % HIGHRES_TIMER_SLOW_TICK_RATE;
-
-	usec += sec_rem * (1000000 / HIGHRES_TIMER_SLOW_TICK_RATE);
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-void highres_timer_read (struct timeval *tv)
-{
-	u32 fast_ticks, slow_ticks;
-	highres_timer_read_ticks (&slow_ticks, &fast_ticks);
-	highres_timer_ticks_to_timeval (slow_ticks, fast_ticks, tv);
-}
diff --git a/arch/v850/kernel/init_task.c b/arch/v850/kernel/init_task.c
deleted file mode 100644
index 44b274dff33..00000000000
--- a/arch/v850/kernel/init_task.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/v850/kernel/init_task.c -- Initial task/thread structures
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-
-static struct fs_struct init_fs = INIT_FS;
-static struct signal_struct init_signals = INIT_SIGNALS (init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM (init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK (init_task);
-
-EXPORT_SYMBOL(init_task);
-
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry.
- */
-union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/v850/kernel/intv.S b/arch/v850/kernel/intv.S
deleted file mode 100644
index 671e4c6150d..00000000000
--- a/arch/v850/kernel/intv.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * arch/v850/kernel/intv.S -- Interrupt vectors
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/entry.h>
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#include <asm/highres_timer.h>
-#endif
-
-/* Jump to an interrupt/trap handler.  These handlers (defined in entry.S)
-   expect the stack-pointer to be saved in ENTRY_SP, so we use sp to do an
-   indirect jump (which avoids problems when the handler is more than a signed
-   22-bit offset away).  */
-#define JUMP_TO_HANDLER(name, sp_save_loc)				      \
-	st.w	sp, sp_save_loc;					      \
-	mov	hilo(name), sp;						      \
-	jmp	[sp]
-
-
-	/* Reset vector.  */
-	.section	.intv.reset, "ax"
-	.org	0x0
-	mov	hilo(C_SYMBOL_NAME(start)), r1;
-	jmp	[r1]
-
-
-	/* Generic interrupt vectors.  */
-	.section	.intv.common, "ax"
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x10 - NMI0
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x20 - NMI1
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x30 - NMI2
-	
-	.balign	0x10
-	JUMP_TO_HANDLER (trap, ENTRY_SP)	// 0x40 - TRAP0n
-	.balign	0x10
-	JUMP_TO_HANDLER (trap, ENTRY_SP)	// 0x50 - TRAP1n
-
-	.balign	0x10
-	JUMP_TO_HANDLER (dbtrap, ENTRY_SP)	// 0x60 - Illegal op / DBTRAP insn
-
-
-	/* Hardware interrupt vectors.  */
-	.section	.intv.mach, "ax"
-	.org	0x0
-
-#if defined (CONFIG_V850E_HIGHRES_TIMER) && defined (IRQ_INTCMD)
-
-	/* Interrupts before the highres timer interrupt.  */
-	.rept	IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-	/* The highres timer interrupt.  */
-	.balign	0x10
-	JUMP_TO_HANDLER (C_SYMBOL_NAME (highres_timer_slow_tick_irq), ENTRY_SP)
-
-	/* Interrupts after the highres timer interrupt.  */
-	.rept	NUM_CPU_IRQS - IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT) - 1
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-#else /* No highres timer */
-
-	.rept	NUM_CPU_IRQS
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-#endif /* Highres timer */
diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c
deleted file mode 100644
index 858c45819aa..00000000000
--- a/arch/v850/kernel/irq.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/v850/kernel/irq.c -- High-level interrupt handling
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1994-2000  Ralf Baechle
- *  Copyright (C) 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was was derived from the mips version, arch/mips/kernel/irq.c
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk("received IRQ %d with unknown interrupt type\n", irq);
-}
-
-volatile unsigned long irq_err_count, spurious_count;
-
-/*
- * Generic, controller-independent functions:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int irq = *(loff_t *) v;
-
-	if (irq == 0) {
-		int cpu;
-		seq_puts(p, "           ");
-		for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++)
-			seq_printf(p, "CPU%d       ", cpu);
-		seq_putc(p, '\n');
-	}
-
-	if (irq < NR_IRQS) {
-		unsigned long flags;
-		struct irqaction *action;
-
-		spin_lock_irqsave(&irq_desc[irq].lock, flags);
-
-		action = irq_desc[irq].action;
-		if (action) {
-			int j;
-			int count = 0;
-			int num = -1;
-			const char *type_name = irq_desc[irq].chip->typename;
-
-			for (j = 0; j < NR_IRQS; j++)
-				if (irq_desc[j].chip->typename == type_name){
-					if (irq == j)
-						num = count;
-					count++;
-				}
-
-			seq_printf(p, "%3d: ",irq);
-			seq_printf(p, "%10u ", kstat_irqs(irq));
-			if (count > 1) {
-				int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
-				seq_printf(p, " %*s%d", 14 - prec,
-					   type_name, num);
-			} else
-				seq_printf(p, " %14s", type_name);
-		
-			seq_printf(p, "  %s", action->name);
-			for (action=action->next; action; action = action->next)
-				seq_printf(p, ", %s", action->name);
-			seq_putc(p, '\n');
-		}
-
-		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
-	} else if (irq == NR_IRQS)
-		seq_printf(p, "ERR: %10lu\n", irq_err_count);
-
-	return 0;
-}
-
-/* Handle interrupt IRQ.  REGS are the registers at the time of ther
-   interrupt.  */
-unsigned int handle_irq (int irq, struct pt_regs *regs)
-{
-	irq_enter();
-	__do_IRQ(irq, regs);
-	irq_exit();
-	return 1;
-}
-
-/* Initialize irq handling for IRQs.
-   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
-   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
-void __init
-init_irq_handlers (int base_irq, int num, int interval,
-		   struct hw_interrupt_type *irq_type)
-{
-	while (num-- > 0) {
-		irq_desc[base_irq].status  = IRQ_DISABLED;
-		irq_desc[base_irq].action  = NULL;
-		irq_desc[base_irq].depth   = 1;
-		irq_desc[base_irq].chip = irq_type;
-		base_irq += interval;
-	}
-}
diff --git a/arch/v850/kernel/ma.c b/arch/v850/kernel/ma.c
deleted file mode 100644
index 143774de75e..00000000000
--- a/arch/v850/kernel/ma.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/v850/kernel/ma.c -- V850E/MA series of cpu chips
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "CSI", IRQ_INTCSI(0), IRQ_INTCSI_NUM,	4, 4 },
-	{ "SER", IRQ_INTSER(0), IRQ_INTSER_NUM,	4, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	4, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	4, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init ma_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void ma_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* We only know about the first two UART channels (though
-	   specific chips may have more).  */
-	if (chan < 2) {
-		unsigned bits = 0x3 << (chan * 3);
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		MA_PORT4_PMC |= bits;
-		/* Specify that we're using the UART, not the CSI device.  */
-		MA_PORT4_PFC |= bits;
-	}
-}
diff --git a/arch/v850/kernel/mach.c b/arch/v850/kernel/mach.c
deleted file mode 100644
index b9db278d2b7..00000000000
--- a/arch/v850/kernel/mach.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/v850/kernel/mach.c -- Defaults for some things defined by "mach.h"
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-/* Called with each timer tick, if non-zero.  */
-void (*mach_tick)(void) = 0;
diff --git a/arch/v850/kernel/mach.h b/arch/v850/kernel/mach.h
deleted file mode 100644
index 9e0e4816ec5..00000000000
--- a/arch/v850/kernel/mach.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/v850/kernel/mach.h -- Machine-dependent functions used by v850 port
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MACH_H__
-#define __V850_MACH_H__
-
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-
-#include <asm/ptrace.h>
-#include <asm/entry.h>
-#include <asm/clinkage.h>
-
-void mach_setup (char **cmdline);
-void mach_gettimeofday (struct timespec *tv);
-void mach_sched_init (struct irqaction *timer_action);
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len);
-void mach_init_irqs (void);
-
-/* If defined, is called very early in the kernel initialization.  The
-   stack pointer is valid, but very little has been initialized (e.g.,
-   bss is not zeroed yet) when this is called, so care must taken.  */
-void mach_early_init (void);
-
-/* If defined, called after the bootmem allocator has been initialized,
-   to allow the platform-dependent code to reserve any areas of RAM that
-   the kernel shouldn't touch.  */
-void mach_reserve_bootmem (void) __attribute__ ((__weak__));
-
-/* Called with each timer tick, if non-zero.  */
-extern void (*mach_tick) (void);
-
-/* The following establishes aliases for various mach_ functions to the
-   name by which the rest of the kernel calls them.  These statements
-   should only have an effect in the file that defines the actual functions. */
-#define MACH_ALIAS(to, from)						      \
-   asm (".global " macrology_stringify (C_SYMBOL_NAME (to)) ";"		      \
-	macrology_stringify (C_SYMBOL_NAME (to))			      \
-	" = " macrology_stringify (C_SYMBOL_NAME (from)))
-/* e.g.: MACH_ALIAS (kernel_name,	arch_spec_name);  */
-
-#endif /* __V850_MACH_H__ */
diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c
deleted file mode 100644
index 007115dc9ce..00000000000
--- a/arch/v850/kernel/me2.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/v850/kernel/me2.c -- V850E/ME2 chip-specific support
- *
- *  Copyright (C) 2003  NEC Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ",    0,                NUM_CPU_IRQS,      1, 7 },
-	{ "INTP",   IRQ_INTP(0),      IRQ_INTP_NUM,      1, 5 },
-	{ "CMD",    IRQ_INTCMD(0),    IRQ_INTCMD_NUM,    1, 3 },
-	{ "UBTIRE", IRQ_INTUBTIRE(0), IRQ_INTUBTIRE_NUM, 5, 4 },
-	{ "UBTIR",  IRQ_INTUBTIR(0),  IRQ_INTUBTIR_NUM,  5, 4 },
-	{ "UBTIT",  IRQ_INTUBTIT(0),  IRQ_INTUBTIT_NUM,  5, 4 },
-	{ "UBTIF",  IRQ_INTUBTIF(0),  IRQ_INTUBTIF_NUM,  5, 4 },
-	{ "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize V850E/ME2 chip interrupts.  */
-void __init me2_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	if (chan == 0) {
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		ME2_PORT1_PMC |= 0xC;
-		/* Specify that we're using the UART, not the CSI device. */
-		ME2_PORT1_PFC |= 0xC;
-	} else if (chan == 1) {
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		ME2_PORT2_PMC |= 0x6;
-		/* Specify that we're using the UART, not the CSI device. */
-		ME2_PORT2_PFC |= 0x6;
-	}
-}
diff --git a/arch/v850/kernel/memcons.c b/arch/v850/kernel/memcons.c
deleted file mode 100644
index 92f514fdcc7..00000000000
--- a/arch/v850/kernel/memcons.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * arch/v850/kernel/memcons.c -- Console I/O to a memory buffer
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-/* If this device is enabled, the linker map should define start and
-   end points for its buffer. */
-extern char memcons_output[], memcons_output_end;
-
-/* Current offset into the buffer.  */
-static unsigned long memcons_offs = 0;
-
-/* Spinlock protecting memcons_offs.  */
-static DEFINE_SPINLOCK(memcons_lock);
-
-
-static size_t write (const char *buf, size_t len)
-{
-	unsigned long flags;
-	char *point;
-
-	spin_lock_irqsave (memcons_lock, flags);
-
-	point = memcons_output + memcons_offs;
-	if (point + len >= &memcons_output_end) {
-		len = &memcons_output_end - point;
-		memcons_offs = 0;
-	} else
-		memcons_offs += len;
-
-	spin_unlock_irqrestore (memcons_lock, flags);
-
-	memcpy (point, buf, len);
-
-	return len;
-}
-
-
-/*  Low-level console. */
-
-static void memcons_write (struct console *co, const char *buf, unsigned len)
-{
-	while (len > 0)
-		len -= write (buf, len);
-}
-
-static struct tty_driver *tty_driver;
-
-static struct tty_driver *memcons_device (struct console *co, int *index)
-{
-	*index = co->index;
-	return tty_driver;
-}
-
-static struct console memcons =
-{
-    .name	= "memcons",
-    .write	= memcons_write,
-    .device	= memcons_device,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-void memcons_setup (void)
-{
-	register_console (&memcons);
-	printk (KERN_INFO "Console: static memory buffer (memcons)\n");
-}
-
-/* Higher level TTY interface.  */
-
-int memcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-int memcons_tty_write (struct tty_struct *tty, const unsigned char *buf, int len)
-{
-	return write (buf, len);
-}
-
-int memcons_tty_write_room (struct tty_struct *tty)
-{
-	return &memcons_output_end - (memcons_output + memcons_offs);
-}
-
-int memcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-	/* We have no buffer.  */
-	return 0;
-}
-
-static const struct tty_operations ops = {
-	.open = memcons_tty_open,
-	.write = memcons_tty_write,
-	.write_room = memcons_tty_write_room,
-	.chars_in_buffer = memcons_tty_chars_in_buffer,
-};
-
-int __init memcons_tty_init (void)
-{
-	int err;
-	struct tty_driver *driver = alloc_tty_driver(1);
-	if (!driver)
-		return -ENOMEM;
-
-	driver->name = "memcons";
-	driver->major = TTY_MAJOR;
-	driver->minor_start = 64;
-	driver->type = TTY_DRIVER_TYPE_SYSCONS;
-	driver->init_termios = tty_std_termios;
-	tty_set_operations(driver, &ops);
-	err = tty_register_driver(driver);
-	if (err) {
-		put_tty_driver(driver);
-		return err;
-	}
-	tty_driver = driver;
-	return 0;
-}
-__initcall (memcons_tty_init);
diff --git a/arch/v850/kernel/module.c b/arch/v850/kernel/module.c
deleted file mode 100644
index 64aeb3e37c5..00000000000
--- a/arch/v850/kernel/module.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * arch/v850/kernel/module.c -- Architecture-specific module functions
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2001,03  Rusty Russell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- *
- * Derived in part from arch/ppc/kernel/module.c
- */
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...)
-#endif
-
-void *module_alloc (unsigned long size)
-{
-	return size == 0 ? 0 : vmalloc (size);
-}
-
-void module_free (struct module *mod, void *module_region)
-{
-	vfree (module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-		     struct module *mod)
-{
-	return 0;
-}
-
-/* Count how many different relocations (different symbol, different
-   addend) */
-static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
-{
-	unsigned int i, j, ret = 0;
-
-	/* Sure, this is order(n^2), but it's usually short, and not
-           time critical */
-	for (i = 0; i < num; i++) {
-		for (j = 0; j < i; j++) {
-			/* If this addend appeared before, it's
-                           already been counted */
-			if (ELF32_R_SYM(rela[i].r_info)
-			    == ELF32_R_SYM(rela[j].r_info)
-			    && rela[i].r_addend == rela[j].r_addend)
-				break;
-		}
-		if (j == i) ret++;
-	}
-	return ret;
-}
-
-/* Get the potential trampolines size required of the init and
-   non-init sections */
-static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
-				  const Elf32_Shdr *sechdrs,
-				  const char *secstrings,
-				  int is_init)
-{
-	unsigned long ret = 0;
-	unsigned i;
-
-	/* Everything marked ALLOC (this includes the exported
-           symbols) */
-	for (i = 1; i < hdr->e_shnum; i++) {
-		/* If it's called *.init*, and we're not init, we're
-                   not interested */
-		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-		    != is_init)
-			continue;
-
-		if (sechdrs[i].sh_type == SHT_RELA) {
-			DEBUGP("Found relocations in section %u\n", i);
-			DEBUGP("Ptr: %p.  Number: %u\n",
-			       (void *)hdr + sechdrs[i].sh_offset,
-			       sechdrs[i].sh_size / sizeof(Elf32_Rela));
-			ret += count_relocs((void *)hdr
-					     + sechdrs[i].sh_offset,
-					     sechdrs[i].sh_size
-					     / sizeof(Elf32_Rela))
-				* sizeof(struct v850_plt_entry);
-		}
-	}
-
-	return ret;
-}
-
-int module_frob_arch_sections(Elf32_Ehdr *hdr,
-			      Elf32_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *me)
-{
-	unsigned int i;
-
-	/* Find .plt and .pltinit sections */
-	for (i = 0; i < hdr->e_shnum; i++) {
-		if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0)
-			me->arch.init_plt_section = i;
-		else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
-			me->arch.core_plt_section = i;
-	}
-	if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
-		printk("Module doesn't contain .plt or .plt.init sections.\n");
-		return -ENOEXEC;
-	}
-
-	/* Override their sizes */
-	sechdrs[me->arch.core_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 0);
-	sechdrs[me->arch.init_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 1);
-	return 0;
-}
-
-int apply_relocate (Elf32_Shdr *sechdrs, const char *strtab,
-		    unsigned int symindex, unsigned int relsec,
-		    struct module *mod)
-{
-	printk ("Barf\n");
-	return -ENOEXEC;
-}
-
-/* Set up a trampoline in the PLT to bounce us to the distant function */
-static uint32_t do_plt_call (void *location, Elf32_Addr val,
-			     Elf32_Shdr *sechdrs, struct module *mod)
-{
-	struct v850_plt_entry *entry;
-	/* Instructions used to do the indirect jump.  */
-	uint32_t tramp[2];
-
-	/* We have to trash a register, so we assume that any control
-	   transfer more than 21-bits away must be a function call
-	   (so we can use a call-clobbered register).  */
-	tramp[0] = 0x0621 + ((val & 0xffff) << 16);   /* mov sym, r1 ... */
-	tramp[1] = ((val >> 16) & 0xffff) + 0x610000; /* ...; jmp r1 */
-
-	/* Init, or core PLT? */
-	if (location >= mod->module_core
-	    && location < mod->module_core + mod->core_size)
-		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
-	else
-		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
-
-	/* Find this entry, or if that fails, the next avail. entry */
-	while (entry->tramp[0])
-		if (entry->tramp[0] == tramp[0] && entry->tramp[1] == tramp[1])
-			return (uint32_t)entry;
-		else
-			entry++;
-
-	entry->tramp[0] = tramp[0];
-	entry->tramp[1] = tramp[1];
-
-	return (uint32_t)entry;
-}
-
-int apply_relocate_add (Elf32_Shdr *sechdrs, const char *strtab,
-			unsigned int symindex, unsigned int relsec,
-			struct module *mod)
-{
-	unsigned int i;
-	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-
-	DEBUGP ("Applying relocate section %u to %u\n", relsec,
-		sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof (*rela); i++) {
-		/* This is where to make the change */
-		uint32_t *loc
-			= ((void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			   + rela[i].r_offset);
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		Elf32_Sym *sym
-			= ((Elf32_Sym *)sechdrs[symindex].sh_addr
-			   + ELF32_R_SYM (rela[i].r_info));
-		uint32_t val = sym->st_value + rela[i].r_addend;
-
-		switch (ELF32_R_TYPE (rela[i].r_info)) {
-		case R_V850_32:
-			/* We write two shorts instead of a long because even
-			   32-bit insns only need half-word alignment, but
-			   32-bit data writes need to be long-word aligned.  */
-			val += ((uint16_t *)loc)[0];
-			val += ((uint16_t *)loc)[1] << 16;
-			((uint16_t *)loc)[0] = val & 0xffff;
-			((uint16_t *)loc)[1] = (val >> 16) & 0xffff;
-			break;
-
-		case R_V850_22_PCREL:
-			/* Maybe jump indirectly via a PLT table entry.  */
-			if ((int32_t)(val - (uint32_t)loc) > 0x1fffff
-			    || (int32_t)(val - (uint32_t)loc) < -0x200000)
-				val = do_plt_call (loc, val, sechdrs, mod);
-
-			val -= (uint32_t)loc;
-
-			/* We write two shorts instead of a long because
-			   even 32-bit insns only need half-word alignment,
-			   but 32-bit data writes need to be long-word
-			   aligned.  */
-			((uint16_t *)loc)[0] =
-				(*(uint16_t *)loc & 0xffc0) /* opcode + reg */
-				| ((val >> 16) & 0xffc03f); /* offs high */
-			((uint16_t *)loc)[1] =
-				(val & 0xffff);		    /* offs low */
-			break;
-
-		default:
-			printk (KERN_ERR "module %s: Unknown reloc: %u\n",
-				mod->name, ELF32_R_TYPE (rela[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-
-	return 0;
-}
-
-void
-module_arch_cleanup(struct module *mod)
-{
-}
diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c
deleted file mode 100644
index e4a4b8e7d5a..00000000000
--- a/arch/v850/kernel/process.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * arch/v850/kernel/process.c -- Arch-dependent process handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/reboot.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-extern void ret_from_fork (void);
-
-
-/* The idle loop.  */
-static void default_idle (void)
-{
-	while (! need_resched ())
-		asm ("halt; nop; nop; nop; nop; nop" ::: "cc");
-}
-
-void (*idle)(void) = default_idle;
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle (void)
-{
-	/* endless idle loop with no priority at all */
-	while (1) {
-		while (!need_resched())
-			(*idle) ();
-
-		preempt_enable_no_resched();
-		schedule();
-		preempt_disable();
-	}
-}
-
-/*
- * This is the mechanism for creating a new kernel thread.
- *
- * NOTE! Only a kernel-only process (ie the swapper or direct descendants who
- * haven't done an "execve()") should use this: it will work within a system
- * call from a "real" process, but the process memory space will not be free'd
- * until both the parent and the child have exited.
- */
-int kernel_thread (int (*fn)(void *), void *arg, unsigned long flags)
-{
-	register mm_segment_t fs = get_fs ();
-	register unsigned long syscall asm (SYSCALL_NUM);
-	register unsigned long arg0 asm (SYSCALL_ARG0);
-	register unsigned long ret asm (SYSCALL_RET);
-
-	set_fs (KERNEL_DS);
-
-	/* Clone this thread.  Note that we don't pass the clone syscall's
-	   second argument -- it's ignored for calls from kernel mode (the
-	   child's SP is always set to the top of the kernel stack).  */
-	arg0 = flags | CLONE_VM;
-	syscall = __NR_clone;
-	asm volatile ("trap " SYSCALL_SHORT_TRAP
-		      : "=r" (ret), "=r" (syscall)
-		      : "1" (syscall), "r" (arg0)
-		      : SYSCALL_SHORT_CLOBBERS);
-
-	if (ret == 0) {
-		/* In child thread, call FN and exit.  */
-		arg0 = (*fn) (arg);
-		syscall = __NR_exit;
-		asm volatile ("trap " SYSCALL_SHORT_TRAP
-			      : "=r" (ret), "=r" (syscall)
-			      : "1" (syscall), "r" (arg0)
-			      : SYSCALL_SHORT_CLOBBERS);
-	}
-
-	/* In parent.  */
-	set_fs (fs);
-
-	return ret;
-}
-
-void flush_thread (void)
-{
-	set_fs (USER_DS);
-}
-
-int copy_thread (int nr, unsigned long clone_flags,
-		 unsigned long stack_start, unsigned long stack_size,
-		 struct task_struct *p, struct pt_regs *regs)
-{
-	/* Start pushing stuff from the top of the child's kernel stack.  */
-	unsigned long orig_ksp = task_tos(p);
-	unsigned long ksp = orig_ksp;
-	/* We push two `state save' stack fames (see entry.S) on the new
-	   kernel stack:
-	     1) The innermost one is what switch_thread would have
-	        pushed, and is used when we context switch to the child
-		thread for the first time.  It's set up to return to
-		ret_from_fork in entry.S.
-	     2) The outermost one (nearest the top) is what a syscall
-	        trap would have pushed, and is set up to return to the
-		same location as the parent thread, but with a return
-		value of 0. */
-	struct pt_regs *child_switch_regs, *child_trap_regs;
-
-	/* Trap frame.  */
-	ksp -= STATE_SAVE_SIZE;
-	child_trap_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-	/* Switch frame.  */
-	ksp -= STATE_SAVE_SIZE;
-	child_switch_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-
-	/* First copy parent's register state to child.  */
-	*child_switch_regs = *regs;
-	*child_trap_regs = *regs;
-
-	/* switch_thread returns to the restored value of the lp
-	   register (r31), so we make that the place where we want to
-	   jump when the child thread begins running.  */
-	child_switch_regs->gpr[GPR_LP] = (v850_reg_t)ret_from_fork;
-
-	if (regs->kernel_mode)
-		/* Since we're returning to kernel-mode, make sure the child's
-		   stored kernel stack pointer agrees with what the actual
-		   stack pointer will be at that point (the trap return code
-		   always restores the SP, even when returning to
-		   kernel-mode).  */
-		child_trap_regs->gpr[GPR_SP] = orig_ksp;
-	else
-		/* Set the child's user-mode stack-pointer (the name
-		   `stack_start' is a misnomer, it's just the initial SP
-		   value).  */
-		child_trap_regs->gpr[GPR_SP] = stack_start;
-
-	/* Thread state for the child (everything else is on the stack).  */
-	p->thread.ksp = ksp;
-
-	return 0;
-}
-
-/*
- * sys_execve() executes a new program.
- */
-int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs)
-{
-	char *filename = getname (name);
-	int error = PTR_ERR (filename);
-
-	if (! IS_ERR (filename)) {
-		error = do_execve (filename, argv, envp, regs);
-		putname (filename);
-	}
-
-	return error;
-}
-
-
-/*
- * These bracket the sleeping functions..
- */
-#define first_sched	((unsigned long)__sched_text_start)
-#define last_sched	((unsigned long)__sched_text_end)
-
-unsigned long get_wchan (struct task_struct *p)
-{
-#if 0  /* Barf.  Figure out the stack-layout later.  XXX  */
-	unsigned long fp, pc;
-	int count = 0;
-
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	pc = thread_saved_pc (p);
-
-	/* This quite disgusting function walks up the stack, following
-	   saved return address, until it something that's out of bounds
-	   (as defined by `first_sched' and `last_sched').  It then
-	   returns the last PC that was in-bounds.  */
-	do {
-		if (fp < stack_page + sizeof (struct task_struct) ||
-		    fp >= 8184+stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (pc < first_sched || pc >= last_sched)
-			return pc;
-		fp = *(unsigned long *) fp;
-	} while (count++ < 16);
-#endif
-
-	return 0;
-}
diff --git a/arch/v850/kernel/procfs.c b/arch/v850/kernel/procfs.c
deleted file mode 100644
index e433cde789b..00000000000
--- a/arch/v850/kernel/procfs.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/v850/kernel/procfs.c -- Introspection functions for /proc filesystem
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-static int cpuinfo_print (struct seq_file *m, void *v)
-{
-	extern unsigned long loops_per_jiffy;
-	
-	seq_printf (m, "CPU-Family:	v850\nCPU-Arch:	%s\n", CPU_ARCH);
-
-#ifdef CPU_MODEL_LONG
-	seq_printf (m, "CPU-Model:	%s (%s)\n", CPU_MODEL, CPU_MODEL_LONG);
-#else
-	seq_printf (m, "CPU-Model:	%s\n", CPU_MODEL);
-#endif
-
-#ifdef CPU_CLOCK_FREQ
-	seq_printf (m, "CPU-Clock:	%ld (%ld MHz)\n",
-		    (long)CPU_CLOCK_FREQ,
-		    (long)CPU_CLOCK_FREQ / 1000000);
-#endif
-
-	seq_printf (m, "BogoMips:	%lu.%02lu\n",
-		    loops_per_jiffy/(500000/HZ),
-		    (loops_per_jiffy/(5000/HZ)) % 100);
-
-#ifdef PLATFORM_LONG
-	seq_printf (m, "Platform:	%s (%s)\n", PLATFORM, PLATFORM_LONG);
-#elif defined (PLATFORM)
-	seq_printf (m, "Platform:	%s\n", PLATFORM);
-#endif
-
-	return 0;
-}
-
-static void *cpuinfo_start (struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *cpuinfo_next (struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return cpuinfo_start (m, pos);
-}
-
-static void cpuinfo_stop (struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= cpuinfo_start,
-	.next	= cpuinfo_next,
-	.stop	= cpuinfo_stop,
-	.show	= cpuinfo_print
-};
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
deleted file mode 100644
index a458ac941b2..00000000000
--- a/arch/v850/kernel/ptrace.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * arch/v850/kernel/ptrace.c -- `ptrace' system call
- *
- *  Copyright (C) 2002,03,04  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04  Miles Bader <miles@gnu.org>
- *
- * Derived from arch/mips/kernel/ptrace.c:
- *
- *  Copyright (C) 1992 Ross Biro
- *  Copyright (C) Linus Torvalds
- *  Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
- *  Copyright (C) 1996 David S. Miller
- *  Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 1999 MIPS Technologies, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-/* Returns the address where the register at REG_OFFS in P is stashed away.  */
-static v850_reg_t *reg_save_addr (unsigned reg_offs, struct task_struct *t)
-{
-	struct pt_regs *regs;
-
-	/* Three basic cases:
-
-	   (1) A register normally saved before calling the scheduler, is
-	       available in the kernel entry pt_regs structure at the top
-	       of the kernel stack.  The kernel trap/irq exit path takes
-	       care to save/restore almost all registers for ptrace'd
-	       processes.
-
-	   (2) A call-clobbered register, where the process P entered the
-	       kernel via [syscall] trap, is not stored anywhere; that's
-	       OK, because such registers are not expected to be preserved
-	       when the trap returns anyway (so we don't actually bother to
-	       test for this case).
-
-	   (3) A few registers not used at all by the kernel, and so
-	       normally never saved except by context-switches, are in the
-	       context switch state.  */
-
-	if (reg_offs == PT_CTPC || reg_offs == PT_CTPSW || reg_offs == PT_CTBP)
-		/* Register saved during context switch.  */
-		regs = thread_saved_regs (t);
-	else
-		/* Register saved during kernel entry (or not available).  */
-		regs = task_pt_regs (t);
-
-	return (v850_reg_t *)((char *)regs + reg_offs);
-}
-
-/* Set the bits SET and clear the bits CLEAR in the v850e DIR
-   (`debug information register').  Returns the new value of DIR.  */
-static inline v850_reg_t set_dir (v850_reg_t set, v850_reg_t clear)
-{
-	register v850_reg_t rval asm ("r10");
-	register v850_reg_t arg0 asm ("r6") = set;
-	register v850_reg_t arg1 asm ("r7") = clear;
-
-	/* The dbtrap handler has exactly this functionality when called
-	   from kernel mode.  0xf840 is a `dbtrap' insn.  */
-	asm (".short 0xf840" : "=r" (rval) : "r" (arg0), "r" (arg1));
-
-	return rval;
-}
-
-/* Makes sure hardware single-stepping is (globally) enabled.
-   Returns true if successful.  */
-static inline int enable_single_stepping (void)
-{
-	static int enabled = 0;	/* Remember whether we already did it.  */
-	if (! enabled) {
-		/* Turn on the SE (`single-step enable') bit, 0x100, in the
-		   DIR (`debug information register').  This may fail if a
-		   processor doesn't support it or something.  We also try
-		   to clear bit 0x40 (`INI'), which is necessary to use the
-		   debug stuff on the v850e2; on the v850e, clearing 0x40
-		   shouldn't cause any problem.  */
-		v850_reg_t dir = set_dir (0x100, 0x40);
-		/* Make sure it really got set.  */
-		if (dir & 0x100)
-			enabled = 1;
-	}
-	return enabled;
-}
-
-/* Try to set CHILD's single-step flag to VAL.  Returns true if successful.  */
-static int set_single_step (struct task_struct *t, int val)
-{
-	v850_reg_t *psw_addr = reg_save_addr(PT_PSW, t);
-	if (val) {
-		/* Make sure single-stepping is enabled.  */
-		if (! enable_single_stepping ())
-			return 0;
-		/* Set T's single-step flag.  */
-		*psw_addr |= 0x800;
-	} else
-		*psw_addr &= ~0x800;
-	return 1;
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-	int rval;
-
-	switch (request) {
-		unsigned long val;
-
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		rval = generic_ptrace_peekdata(child, addr, data);
-		goto out;
-
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		rval = generic_ptrace_pokedata(child, addr, data);
-		goto out;
-
-	/* Read/write the word at location ADDR in the registers.  */
-	case PTRACE_PEEKUSR:
-	case PTRACE_POKEUSR:
-		rval = 0;
-		if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
-			/* Special requests that don't actually correspond
-			   to offsets in struct pt_regs.  */
-			if (addr == PT_TEXT_ADDR)
-				val = child->mm->start_code;
-			else if (addr == PT_DATA_ADDR)
-				val = child->mm->start_data;
-			else if (addr == PT_TEXT_LEN)
-				val = child->mm->end_code
-					- child->mm->start_code;
-			else
-				rval = -EIO;
-		} else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
-			v850_reg_t *reg_addr = reg_save_addr(addr, child);
-			if (request == PTRACE_PEEKUSR)
-				val = *reg_addr;
-			else
-				*reg_addr = data;
-		} else
-			rval = -EIO;
-
-		if (rval == 0 && request == PTRACE_PEEKUSR)
-			rval = put_user (val, (unsigned long *)data);
-		goto out;
-
-	/* Continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* Restart after a signal.  */
-	case PTRACE_CONT:
-	/* Execute a single instruction. */
-	case PTRACE_SINGLESTEP:
-		rval = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		/* Turn CHILD's single-step flag on or off.  */
-		if (! set_single_step (child, request == PTRACE_SINGLESTEP))
-			break;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		rval = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		rval = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		set_single_step (child, 0);  /* Clear single-step flag */
-		rval = ptrace_detach(child, data);
-		break;
-
-	default:
-		rval = -EIO;
-		goto out;
-	}
- out:
-	return rval;
-}
-
-asmlinkage void syscall_trace(void)
-{
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-void ptrace_disable (struct task_struct *child)
-{
-	/* nothing to do */
-}
diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c
deleted file mode 100644
index 43018e1edeb..00000000000
--- a/arch/v850/kernel/rte_cb.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * include/asm-v850/rte_cb.c -- Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-static void led_tick (void);
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-#ifdef CONFIG_RTE_CB_MULTI
-extern void multi_init (void);
-#endif
-
-
-void __init rte_cb_early_init (void)
-{
-	v850e_intc_disable_irqs ();
-
-#ifdef CONFIG_RTE_CB_MULTI
-	multi_init ();
-#endif
-}
-
-void __init mach_setup (char **cmdline)
-{
-#ifdef CONFIG_RTE_MB_A_PCI
-	/* Probe for Mother-A, and print a message if we find it.  */
-	*(volatile unsigned long *)MB_A_SRAM_ADDR = 0xDEADBEEF;
-	if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0xDEADBEEF) {
-		*(volatile unsigned long *)MB_A_SRAM_ADDR = 0x12345678;
-		if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0x12345678)
-			printk (KERN_INFO
-				"          NEC SolutionGear/Midas lab"
-				" RTE-MOTHER-A motherboard\n");
-	}
-#endif /* CONFIG_RTE_MB_A_PCI */
-
-	mach_tick = led_tick;
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-/* This says `HALt.' in LEDese.  */
-static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 };
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-
-	/* Ignore all interrupts.  */
-	local_irq_disable ();
-
-	/* Write a little message.  */
-	write_leds (0, halt_leds_msg, sizeof halt_leds_msg);
-
-	/* Really halt.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-
-/* Animated LED display for timer tick.  */
-
-#define TICK_UPD_FREQ	6
-static int tick_frames[][10] = {
-	{ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, -1 },
-	{ 0x63, 0x5c, -1 },
-	{ 0x5c, 0x00, -1 },
-	{ 0x63, 0x00, -1 },
-	{ -1 }
-};
-
-static void led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == (HZ / TICK_UPD_FREQ)) {
-		/* Which frame we're currently displaying for each digit.  */
-		static unsigned frame_nums[LED_NUM_DIGITS] = { 0 };
-		/* Display image.  */
-		static unsigned char image[LED_NUM_DIGITS] = { 0 };
-		unsigned char prev_image[LED_NUM_DIGITS];
-		int write_to_leds = 1; /* true if we should actually display */
-		int digit;
-
-		/* We check to see if the physical LEDs contains what we last
-		   wrote to them; if not, we suppress display (this is so that
-		   users can write to the LEDs, and not have their output
-		   overwritten).  As a special case, we start writing again if
-		   all the LEDs are blank, or our display image is all zeros
-		   (indicating that this is the initial update, when the actual
-		   LEDs might contain random data).  */
-		read_leds (0, prev_image, LED_NUM_DIGITS);
-		for (digit = 0; digit < LED_NUM_DIGITS; digit++)
-			if (image[digit] != prev_image[digit]
-			    && image[digit] && prev_image[digit])
-			{
-				write_to_leds = 0;
-				break;
-			}
-
-		/* Update display image.  */
-		for (digit = 0;
-		     digit < LED_NUM_DIGITS && tick_frames[digit][0] >= 0;
-		     digit++)
-		{
-			int frame = tick_frames[digit][frame_nums[digit]];
-			if (frame < 0) {
-				image[digit] = tick_frames[digit][0];
-				frame_nums[digit] = 1;
-			} else {
-				image[digit] = frame;
-				frame_nums[digit]++;
-				break;
-			}
-		}
-
-		if (write_to_leds)
-			/* Write the display image to the physical LEDs.  */
-			write_leds (0, image, LED_NUM_DIGITS);
-
-		counter = 0;
-	}
-}
-
-
-/* Mother-A interrupts.  */
-
-#ifdef CONFIG_RTE_GBUS_INT
-
-#define L GBUS_INT_PRIORITY_LOW
-#define M GBUS_INT_PRIORITY_MEDIUM
-#define H GBUS_INT_PRIORITY_HIGH
-
-static struct gbus_int_irq_init gbus_irq_inits[] = {
-#ifdef CONFIG_RTE_MB_A_PCI
-	{ "MB_A_LAN",	IRQ_MB_A_LAN,		1,		     1, L },
-	{ "MB_A_PCI1",	IRQ_MB_A_PCI1(0),	IRQ_MB_A_PCI1_NUM,   1, L },
-	{ "MB_A_PCI2",	IRQ_MB_A_PCI2(0),	IRQ_MB_A_PCI2_NUM,   1, L },
-	{ "MB_A_EXT",	IRQ_MB_A_EXT(0),	IRQ_MB_A_EXT_NUM,    1, L },
-	{ "MB_A_USB_OC",IRQ_MB_A_USB_OC(0),	IRQ_MB_A_USB_OC_NUM, 1, L },
-	{ "MB_A_PCMCIA_OC",IRQ_MB_A_PCMCIA_OC,	1,		     1, L },
-#endif
-	{ 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-#endif /* CONFIG_RTE_GBUS_INT */
-
-
-void __init rte_cb_init_irqs (void)
-{
-#ifdef CONFIG_RTE_GBUS_INT
-	gbus_int_init_irqs ();
-	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-#endif /* CONFIG_RTE_GBUS_INT */
-}
diff --git a/arch/v850/kernel/rte_cb_leds.c b/arch/v850/kernel/rte_cb_leds.c
deleted file mode 100644
index aa47ab1dcd8..00000000000
--- a/arch/v850/kernel/rte_cb_leds.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-v850/rte_cb_leds.c -- Midas lab RTE-CB board LED device support
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-
-#include <asm/uaccess.h>
-
-#define LEDS_MINOR	169	/* Minor device number, using misc major.  */
-
-/* The actual LED hardware is write-only, so we hold the contents here too.  */
-static unsigned char leds_image[LED_NUM_DIGITS] = { 0 };
-
-/* Spinlock protecting the above leds.  */
-static DEFINE_SPINLOCK(leds_lock);
-
-/* Common body of LED read/write functions, checks POS and LEN for
-   correctness, declares a variable using IMG_DECL, initialized pointing at
-   the POS position in the LED image buffer, and and iterates COPY_EXPR
-   until BUF is equal to the last buffer position; finally, sets LEN to be
-   the amount actually copied.  IMG should be a variable declaration
-   (without an initializer or a terminating semicolon); POS, BUF, and LEN
-   should all be simple variables.  */
-#define DO_LED_COPY(img_decl, pos, buf, len, copy_expr)			\
-do {									\
-	if (pos > LED_NUM_DIGITS)					\
-		len = 0;						\
-	else {								\
-		if (pos + len > LED_NUM_DIGITS)				\
-			len = LED_NUM_DIGITS - pos;			\
-									\
-		if (len > 0) {						\
-			unsigned long _flags;				\
-			const char *_end = buf + len;			\
-			img_decl = &leds_image[pos];			\
-									\
-			spin_lock_irqsave (leds_lock, _flags);		\
-			do						\
-				(copy_expr);				\
-			while (buf != _end);				\
-			spin_unlock_irqrestore (leds_lock, _flags);	\
-		}							\
-	}								\
-} while (0)
-
-/* Read LEN bytes from LEDs at position POS, into BUF.
-   Returns actual amount read.  */
-unsigned read_leds (unsigned pos, char *buf, unsigned len)
-{
-	DO_LED_COPY (const char *img, pos, buf, len, *buf++ = *img++);
-	return len;
-}
-
-/* Write LEN bytes to LEDs at position POS, from BUF.
-   Returns actual amount written.  */
-unsigned write_leds (unsigned pos, const char *buf, unsigned len)
-{
-	/* We write the actual LED values backwards, because
-	   increasing memory addresses reflect LEDs right-to-left. */
-	volatile char *led = &LED (LED_NUM_DIGITS - pos - 1);
-	/* We invert the value written to the hardware, because 1 = off,
-	   and 0 = on.  */
-	DO_LED_COPY (char *img, pos, buf, len,
-		     *led-- = 0xFF ^ (*img++ = *buf++));
-	return len;
-}
-
-
-/* Device functions.  */
-
-static ssize_t leds_dev_read (struct file *file, char *buf, size_t len,
-			      loff_t *pos)
-{
-	char temp_buf[LED_NUM_DIGITS];
-	len = read_leds (*pos, temp_buf, len);
-	if (copy_to_user (buf, temp_buf, len))
-		return -EFAULT;
-	*pos += len;
-	return len;
-}
-
-static ssize_t leds_dev_write (struct file *file, const char *buf, size_t len,
-			       loff_t *pos)
-{
-	char temp_buf[LED_NUM_DIGITS];
-	if (copy_from_user (temp_buf, buf, min_t(size_t, len, LED_NUM_DIGITS)))
-		return -EFAULT;
-	len = write_leds (*pos, temp_buf, len);
-	*pos += len;
-	return len;
-}
-
-static loff_t leds_dev_lseek (struct file *file, loff_t offs, int whence)
-{
-	if (whence == 1)
-		offs += file->f_pos; /* relative */
-	else if (whence == 2)
-		offs += LED_NUM_DIGITS; /* end-relative */
-
-	if (offs < 0 || offs > LED_NUM_DIGITS)
-		return -EINVAL;
-
-	file->f_pos = offs;
-
-	return 0;
-}
-
-static const struct file_operations leds_fops = {
-	.read		= leds_dev_read,
-	.write		= leds_dev_write,
-	.llseek		= leds_dev_lseek
-};
-
-static struct miscdevice leds_miscdev = {
-	.name		= "leds",
-	.minor		= LEDS_MINOR,
-	.fops		= &leds_fops
-};
-
-int __init leds_dev_init (void)
-{
-	return misc_register (&leds_miscdev);
-}
-
-__initcall (leds_dev_init);
diff --git a/arch/v850/kernel/rte_cb_multi.c b/arch/v850/kernel/rte_cb_multi.c
deleted file mode 100644
index 963d55ab34c..00000000000
--- a/arch/v850/kernel/rte_cb_multi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/rte_multi.c -- Support for Multi debugger monitor ROM
- * 	on Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-
-#include <asm/machdep.h>
-
-#define IRQ_ADDR(irq) (0x80 + (irq) * 0x10)
-
-/* A table of which interrupt vectors to install, since blindly
-   installing all of them makes the debugger stop working.  This is a
-   list of offsets in the interrupt vector area; each entry means to
-   copy that particular 16-byte vector.  An entry less than zero ends
-   the table.  */
-static long multi_intv_install_table[] = {
-	/* Trap vectors */
-	0x40, 0x50,		
-
-#ifdef CONFIG_RTE_CB_MULTI_DBTRAP
-	/* Illegal insn / dbtrap.  These are used by multi, so only handle
-	   them if configured to do so.  */
-	0x60,
-#endif
-
-	/* GINT1 - GINT3 (note, not GINT0!) */
-	IRQ_ADDR (IRQ_GINT(1)),
-	IRQ_ADDR (IRQ_GINT(2)),
-	IRQ_ADDR (IRQ_GINT(3)),
-
-	/* Timer D interrupts (up to 4 timers) */
-	IRQ_ADDR (IRQ_INTCMD(0)),
-#if IRQ_INTCMD_NUM > 1
-	IRQ_ADDR (IRQ_INTCMD(1)),
-#if IRQ_INTCMD_NUM > 2
-	IRQ_ADDR (IRQ_INTCMD(2)),
-#if IRQ_INTCMD_NUM > 3
-	IRQ_ADDR (IRQ_INTCMD(3)),
-#endif
-#endif
-#endif
-	
-	/* UART interrupts (up to 3 channels) */
-	IRQ_ADDR (IRQ_INTSER (0)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (0)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (0)), /* tx */
-#if IRQ_INTSR_NUM > 1
-	IRQ_ADDR (IRQ_INTSER (1)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (1)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (1)), /* tx */
-#if IRQ_INTSR_NUM > 2
-	IRQ_ADDR (IRQ_INTSER (2)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (2)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (2)), /* tx */
-#endif
-#endif
-
-	-1
-};
-
-/* Early initialization for kernel using Multi debugger ROM monitor.  */
-void __init multi_init (void)
-{
-	/* We're using the Multi debugger monitor, so we have to install
-	   the interrupt vectors.  The monitor doesn't allow them to be
-	   initially downloaded into their final destination because
-	   it's in the monitor's scratch-RAM area.  Unfortunately, Multi
-	   also doesn't deal correctly with ELF sections where the LMA
-	   and VMA differ -- it just ignores the LMA -- so we can't use
-	   that feature to work around the problem.  What we do instead
-	   is just put the interrupt vectors into a normal section, and
-	   do the necessary copying and relocation here.  Since the
-	   interrupt vector basically only contains `jr' instructions
-	   and no-ops, it's not that hard.  */
-	extern unsigned long _intv_load_start, _intv_start;
-	register unsigned long *src = &_intv_load_start;
-	register unsigned long *dst = (unsigned long *)INTV_BASE;
-	register unsigned long jr_fixup = (char *)&_intv_start - (char *)dst;
-	register long *ii;
-
-	/* Copy interrupt vectors as instructed by multi_intv_install_table. */
-	for (ii = multi_intv_install_table; *ii >= 0; ii++) {
-		/* Copy 16-byte interrupt vector at offset *ii.  */
-		int boffs;
-		for (boffs = 0; boffs < 0x10; boffs += sizeof *src) {
-			/* Copy a single word, fixing up the jump offs
-			   if it's a `jr' instruction.  */
-			int woffs = (*ii + boffs) / sizeof *src;
-			unsigned long word = src[woffs];
-
-			if ((word & 0xFC0) == 0x780) {
-				/* A `jr' insn, fix up its offset (and yes, the
-				   weird half-word swapping is intentional). */
-				unsigned short hi = word & 0xFFFF;
-				unsigned short lo = word >> 16;
-				unsigned long udisp22
-					= lo + ((hi & 0x3F) << 16);
-				long disp22 = (long)(udisp22 << 10) >> 10;
-
-				disp22 += jr_fixup;
-
-				hi = ((disp22 >> 16) & 0x3F) | 0x780;
-				lo = disp22 & 0xFFFF;
-
-				word = hi + (lo << 16);
-			}
-
-			dst[woffs] = word;
-		}
-	}
-}
diff --git a/arch/v850/kernel/rte_ma1_cb-rom.ld b/arch/v850/kernel/rte_ma1_cb-rom.ld
deleted file mode 100644
index 87b618f8253..00000000000
--- a/arch/v850/kernel/rte_ma1_cb-rom.ld
+++ /dev/null
@@ -1,14 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in ROM.  */
-
-MEMORY {
-	ROM   : ORIGIN = 0x00000000, LENGTH = 0x00100000
-	/* 1MB of SRAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.c b/arch/v850/kernel/rte_ma1_cb.c
deleted file mode 100644
index 08abf3d5f8d..00000000000
--- a/arch/v850/kernel/rte_ma1_cb.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/v850/kernel/rte_ma1_cb.c -- Midas labs RTE-V850E/MA1-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/ma1.h>
-#include <asm/rte_ma1_cb.h>
-#include <asm/v850e_timer_c.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_early_init (void)
-{
-	rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-#ifdef CONFIG_RTE_CB_MULTI
-	/* Prevent the kernel from touching the monitor's scratch RAM.  */
-	reserve_bootmem(MON_SCRATCH_ADDR, MON_SCRATCH_SIZE,
-			BOOTMEM_DEFAULT);
-#endif
-
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_ma1_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-MA1-CB connects some general-purpose I/O pins on the
-	   CPU to the RTS/CTS lines of UART 0's serial connection.
-	   I/O pins P42 and P43 are RTS and CTS respectively.  */
-	if (chan == 0) {
-		/* Put P42 & P43 in I/O port mode.  */
-		MA_PORT4_PMC &= ~0xC;
-		/* Make P42 an output, and P43 an input.  */
-		MA_PORT4_PM = (MA_PORT4_PM & ~0xC) | 0x8;
-	}
-
-	/* Do pre-configuration for the actual UART.  */
-	ma_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	unsigned tc;
-
-	/* Initialize interrupts.  */
-	ma_init_irqs ();
-	rte_cb_init_irqs ();
-
-	/* Use falling-edge-sensitivity for interrupts .  */
-	V850E_TIMER_C_SESC (0) &= ~0xC;
-	V850E_TIMER_C_SESC (1) &= ~0xF;
-
-	/* INTP000-INTP011 are shared with `Timer C', so we have to set
-	   up Timer C to pass them through as raw interrupts.  */
-	for (tc = 0; tc < 2; tc++)
-		/* Turn on the timer.  */
-		V850E_TIMER_C_TMCC0 (tc) |= V850E_TIMER_C_TMCC0_CAE;
-
-	/* Make sure the relevant port0/port1 pins are assigned
-	   interrupt duty.  We used INTP001-INTP011 (don't screw with
-	   INTP000 because the monitor uses it).  */
-	MA_PORT0_PMC |= 0x4;	/* P02 (INTP001) in IRQ mode.  */
-	MA_PORT1_PMC |= 0x6;	/* P11 (INTP010) & P12 (INTP011) in IRQ mode.*/
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.ld b/arch/v850/kernel/rte_ma1_cb.ld
deleted file mode 100644
index c8e16d16be4..00000000000
--- a/arch/v850/kernel/rte_ma1_cb.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in SDRAM, under Multi debugger.  */
-
-MEMORY {
-	/* 1MB of SRAM; we can't use the last 32KB, because it's used by
-	   the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-	/* Monitor scratch RAM; only the interrupt vectors should go here.  */
-	MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_MA1_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	/* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-	   kernel in a single ELF segment, and the Multi debugger (which
-	   we use to load the kernel) appears to have bizarre problems
-	   dealing with it.  */
-
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-
-		/* The address at which the interrupt vectors are initially
-		   loaded by the loader.  We can't load the interrupt vectors
-		   directly into their target location, because the monitor
-		   ROM for the GHS Multi debugger barfs if we try.
-		   Unfortunately, Multi also doesn't deal correctly with ELF
-		   sections where the LMA and VMA differ (it just ignores the
-		   LMA), so we can't use that feature to work around the
-		   problem!  What we do instead is just put the interrupt
-		   vectors into a normal section, and have the
-		   `mach_early_init' function for Midas boards do the
-		   necessary copying and relocation at runtime (this section
-		   basically only contains `jr' instructions, so it's not
-		   that hard).  */
-		. = ALIGN (0x10) ;
-		__intv_load_start = . ;
-		INTV_CONTENTS
-	} > KRAM
-
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c
deleted file mode 100644
index 687e367d8b6..00000000000
--- a/arch/v850/kernel/rte_mb_a_pci.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/*
- * arch/v850/kernel/mb_a_pci.c -- PCI support for Midas lab RTE-MOTHER-A board
- *
- *  Copyright (C) 2001,02,03,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-
-/* __nomods_init is like __devinit, but is a no-op when modules are enabled.
-   This is used by some routines that can be called either during boot
-   or by a module.  */
-#ifdef CONFIG_MODULES
-#define __nomods_init /*nothing*/
-#else
-#define __nomods_init __devinit
-#endif
-
-/* PCI devices on the Mother-A board can only do DMA to/from the MB SRAM
-   (the RTE-V850E/MA1-CB cpu board doesn't support PCI access to
-   CPU-board memory), and since linux DMA buffers are allocated in
-   normal kernel memory, we basically have to copy DMA blocks around
-   (this is like a `bounce buffer').  When a DMA block is `mapped', we
-   allocate an identically sized block in MB SRAM, and if we're doing
-   output to the device, copy the CPU-memory block to the MB-SRAM block.
-   When an active block is `unmapped', we will copy the block back to
-   CPU memory if necessary, and then deallocate the MB SRAM block.
-   Ack.  */
-
-/* Where the motherboard SRAM is in the PCI-bus address space (the
-   first 512K of it is also mapped at PCI address 0).  */
-#define PCI_MB_SRAM_ADDR 0x800000
-
-/* Convert CPU-view MB SRAM address to/from PCI-view addresses of the
-   same memory.  */
-#define MB_SRAM_TO_PCI(mb_sram_addr) \
-   ((dma_addr_t)mb_sram_addr - MB_A_SRAM_ADDR + PCI_MB_SRAM_ADDR)
-#define PCI_TO_MB_SRAM(pci_addr)     \
-   (void *)(pci_addr - PCI_MB_SRAM_ADDR + MB_A_SRAM_ADDR)
-
-static void pcibios_assign_resources (void);
-
-struct mb_pci_dev_irq {
-	unsigned dev;		/* PCI device number */
-	unsigned irq_base;	/* First IRQ  */
-	unsigned query_pin;	/* True if we should read the device's
-				   Interrupt Pin info, and allocate
-				   interrupt IRQ_BASE + PIN.  */
-};
-
-/* PCI interrupts are mapped statically to GBUS interrupts.  */
-static struct mb_pci_dev_irq mb_pci_dev_irqs[] = {
-	/* Motherboard SB82558 ethernet controller */
-	{ 10,	IRQ_MB_A_LAN,		0 },
-	/* PCI slot 1 */
-	{ 8, 	IRQ_MB_A_PCI1(0),	1 },
-	/* PCI slot 2 */
-	{ 9, 	IRQ_MB_A_PCI2(0),	1 }
-};
-#define NUM_MB_PCI_DEV_IRQS ARRAY_SIZE(mb_pci_dev_irqs)
-
-
-/* PCI configuration primitives.  */
-
-#define CONFIG_DMCFGA(bus, devfn, offs)					\
-   (0x80000000								\
-    | ((offs) & ~0x3)							\
-    | ((devfn) << 8)							\
-    | ((bus)->number << 16))
-
-static int
-mb_pci_read (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 *rval)
-{
-	u32 addr;
-	int flags;
-
-	local_irq_save (flags);
-
-	MB_A_PCI_PCICR = 0x7;
-	MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-	addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-	switch (size) {
-	case 1:	*rval = *(volatile  u8 *)addr; break;
-	case 2:	*rval = *(volatile u16 *)addr; break;
-	case 4:	*rval = *(volatile u32 *)addr; break;
-	}
-
-        if (MB_A_PCI_PCISR & 0x2000) {
-		MB_A_PCI_PCISR = 0x2000;
-		*rval = ~0;
-        }
-
-	MB_A_PCI_DMCFGA = 0;
-
-	local_irq_restore (flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mb_pci_write (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 val)
-{
-	u32 addr;
-	int flags;
-
-	local_irq_save (flags);
-
-	MB_A_PCI_PCICR = 0x7;
-	MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-	addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-	switch (size) {
-	case 1: *(volatile  u8 *)addr = val; break;
-	case 2: *(volatile u16 *)addr = val; break;
-	case 4: *(volatile u32 *)addr = val; break;
-	}
-
-        if (MB_A_PCI_PCISR & 0x2000)
-		MB_A_PCI_PCISR = 0x2000;
-
-	MB_A_PCI_DMCFGA = 0;
-
-	local_irq_restore (flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mb_pci_config_ops = {
-	.read	= mb_pci_read,
-	.write	= mb_pci_write,
-};
-
-
-/* PCI Initialization.  */
-
-static struct pci_bus *mb_pci_bus = 0;
-
-/* Do initial PCI setup.  */
-static int __devinit pcibios_init (void)
-{
-	u32 id = MB_A_PCI_PCIHIDR;
-	u16 vendor = id & 0xFFFF;
-	u16 device = (id >> 16) & 0xFFFF;
-
-	if (vendor == PCI_VENDOR_ID_PLX && device == PCI_DEVICE_ID_PLX_9080) {
-		printk (KERN_INFO
-			"PCI: PLX Technology PCI9080 HOST/PCI bridge\n");
-
-		MB_A_PCI_PCICR = 0x147;
-
-		MB_A_PCI_PCIBAR0 = 0x007FFF00;
-		MB_A_PCI_PCIBAR1 = 0x0000FF00;
-		MB_A_PCI_PCIBAR2 = 0x00800000;
-
-		MB_A_PCI_PCILTR = 0x20;
-
-		MB_A_PCI_PCIPBAM |= 0x3;
-
-		MB_A_PCI_PCISR =  ~0; /* Clear errors.  */
-
-		/* Reprogram the motherboard's IO/config address space,
-		   as we don't support the GCS7 address space that the
-		   default uses.  */
-
-		/* Significant address bits used for decoding PCI GCS5 space
-		   accesses.  */
-		MB_A_PCI_DMRR = ~(MB_A_PCI_MEM_SIZE - 1);
-
-		/* I don't understand this, but the SolutionGear example code
-		   uses such an offset, and it doesn't work without it.  XXX */
-#if GCS5_SIZE == 0x00800000
-#define GCS5_CFG_OFFS 0x00800000
-#else
-#define GCS5_CFG_OFFS 0
-#endif
-
-		/* Address bit values for matching.  Note that we have to give
-		   the address from the motherboard's point of view, which is
-		   different than the CPU's.  */
-		/* PCI memory space.  */
-		MB_A_PCI_DMLBAM = GCS5_CFG_OFFS + 0x0;
-		/* PCI I/O space.  */
-		MB_A_PCI_DMLBAI =
-			GCS5_CFG_OFFS + (MB_A_PCI_IO_ADDR - GCS5_ADDR);
-
-		mb_pci_bus = pci_scan_bus (0, &mb_pci_config_ops, 0);
-
-		pcibios_assign_resources ();
-	} else
-		printk (KERN_ERR "PCI: HOST/PCI bridge not found\n");
-
-	return 0;
-}
-
-subsys_initcall (pcibios_init);
-
-char __devinit *pcibios_setup (char *option)
-{
-	/* Don't handle any options. */
-	return option;
-}
-
-
-int __nomods_init pcibios_enable_device (struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because "
-			       "of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
-
-/* Resource allocation.  */
-static void __devinit pcibios_assign_resources (void)
-{
-	struct pci_dev *dev = NULL;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		unsigned di_num;
-		unsigned class = dev->class >> 8;
-
-		if (class && class != PCI_CLASS_BRIDGE_HOST) {
-			unsigned r_num;
-			for(r_num = 0; r_num < 6; r_num++) {
-				r = &dev->resource[r_num];
-				if (!r->start && r->end)
-					pci_assign_resource (dev, r_num);
-			}
-		}
-
-		/* Assign interrupts.  */
-		for (di_num = 0; di_num < NUM_MB_PCI_DEV_IRQS; di_num++) {
-			struct mb_pci_dev_irq *di = &mb_pci_dev_irqs[di_num];
-
-			if (di->dev == PCI_SLOT (dev->devfn)) {
-				unsigned irq = di->irq_base;
-
-				if (di->query_pin) {
-					/* Find out which interrupt pin
-					   this device uses (each PCI
-					   slot has 4).  */
-					u8 irq_pin;
-
-					pci_read_config_byte (dev,
-							     PCI_INTERRUPT_PIN,
-							      &irq_pin);
-
-					if (irq_pin == 0)
-						/* Doesn't use interrupts.  */ 
-						continue;
-					else
-						irq += irq_pin - 1;
-				}
-
-				pcibios_update_irq (dev, irq);
-			}
-		}
-	}
-}
-
-void __devinit pcibios_update_irq (struct pci_dev *dev, int irq)
-{
-	dev->irq = irq;
-	pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
-}
-
-void __devinit
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			struct resource *res)
-{
-	unsigned long offset = 0;
-
-	if (res->flags & IORESOURCE_IO) {
-		offset = MB_A_PCI_IO_ADDR;
-	} else if (res->flags & IORESOURCE_MEM) {
-		offset = MB_A_PCI_MEM_ADDR;
-	}
-
-	region->start = res->start - offset;
-	region->end = res->end - offset;
-}
-
-
-/* Stubs for things we don't use.  */
-
-/* Called after each bus is probed, but before its children are examined. */
-void pcibios_fixup_bus(struct pci_bus *b)
-{
-}
-
-void
-pcibios_align_resource (void *data, struct resource *res,
-			resource_size_t size, resource_size_t align)
-{
-}
-
-void pcibios_set_master (struct pci_dev *dev)
-{
-}
-
-
-/* Mother-A SRAM memory allocation.  This is a simple first-fit allocator.  */
-
-/* A memory free-list node.  */
-struct mb_sram_free_area {
-	void *mem;
-	unsigned long size;
-	struct mb_sram_free_area *next;
-};
-
-/* The tail of the free-list, which starts out containing all the SRAM.  */
-static struct mb_sram_free_area mb_sram_free_tail = {
-	(void *)MB_A_SRAM_ADDR, MB_A_SRAM_SIZE, 0
-};
-
-/* The free-list.  */
-static struct mb_sram_free_area *mb_sram_free_areas = &mb_sram_free_tail;
-
-/* The free-list of free free-list nodes. (:-)  */
-static struct mb_sram_free_area *mb_sram_free_free_areas = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(mb_sram_lock);
-
-/* Allocate a memory block at least SIZE bytes long in the Mother-A SRAM
-   space.  */
-static void *alloc_mb_sram (size_t size)
-{
-	struct mb_sram_free_area *prev, *fa;
-	unsigned long flags;
-	void *mem = 0;
-
-	spin_lock_irqsave (mb_sram_lock, flags);
-
-	/* Look for a free area that can contain SIZE bytes.  */
-	for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-		if (fa->size >= size) {
-			/* Found one!  */
-			mem = fa->mem;
-
-			if (fa->size == size) {
-				/* In fact, it fits exactly, so remove
-				   this node from the free-list.  */
-				if (prev)
-					prev->next = fa->next;
-				else
-					mb_sram_free_areas = fa->next;
-				/* Put it on the free-list-entry-free-list. */
-				fa->next = mb_sram_free_free_areas;
-				mb_sram_free_free_areas = fa;
-			} else {
-				/* FA is bigger than SIZE, so just
-				   reduce its size to account for this
-				   allocation.  */
-				fa->mem += size;
-				fa->size -= size;
-			}
-
-			break;
-		}
-
-	spin_unlock_irqrestore (mb_sram_lock, flags);
-
-	return mem;
-}
-
-/* Return the memory area MEM of size SIZE to the MB SRAM free pool.  */
-static void free_mb_sram (void *mem, size_t size)
-{
-	struct mb_sram_free_area *prev, *fa, *new_fa;
-	unsigned long flags;
-	void *end = mem + size;
-
-	spin_lock_irqsave (mb_sram_lock, flags);
-
- retry:
-	/* Find an adjacent free-list entry.  */
-	for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-		if (fa->mem == end) {
-			/* FA is just after MEM, grow down to encompass it. */
-			fa->mem = mem;
-			fa->size += size;
-			goto done;
-		} else if (fa->mem + fa->size == mem) {
-			struct mb_sram_free_area *next_fa = fa->next;
-
-			/* FA is just before MEM, expand to encompass it. */
-			fa->size += size;
-
-			/* See if FA can now be merged with its successor. */
-			if (next_fa && fa->mem + fa->size == next_fa->mem) {
-				/* Yup; merge NEXT_FA's info into FA.  */
-				fa->size += next_fa->size;
-				fa->next = next_fa->next;
-				/* Free NEXT_FA.  */
-				next_fa->next = mb_sram_free_free_areas;
-				mb_sram_free_free_areas = next_fa;
-			}
-			goto done;
-		} else if (fa->mem > mem)
-			/* We've reached the right spot in the free-list
-			   without finding an adjacent free-area, so add
-			   a new free area to hold mem. */
-			break;
-
-	/* Make a new free-list entry.  */
-
-	/* First, get a free-list entry.  */
-	if (! mb_sram_free_free_areas) {
-		/* There are none, so make some.  */
-		void *block;
-		size_t block_size = sizeof (struct mb_sram_free_area) * 8;
-
-		/* Don't hold the lock while calling kmalloc (I'm not
-		   sure whether it would be a problem, since we use
-		   GFP_ATOMIC, but it makes me nervous).  */
-		spin_unlock_irqrestore (mb_sram_lock, flags);
-
-		block = kmalloc (block_size, GFP_ATOMIC);
-		if (! block)
-			panic ("free_mb_sram: can't allocate free-list entry");
-
-		/* Now get the lock back.  */
-		spin_lock_irqsave (mb_sram_lock, flags);
-
-		/* Add the new free free-list entries.  */
-		while (block_size > 0) {
-			struct mb_sram_free_area *nfa = block;
-			nfa->next = mb_sram_free_free_areas;
-			mb_sram_free_free_areas = nfa;
-			block += sizeof *nfa;
-			block_size -= sizeof *nfa;
-		}
-
-		/* Since we dropped the lock to call kmalloc, the
-		   free-list could have changed, so retry from the
-		   beginning.  */
-		goto retry;
-	}
-
-	/* Remove NEW_FA from the free-list of free-list entries.  */
-	new_fa = mb_sram_free_free_areas;
-	mb_sram_free_free_areas = new_fa->next;
-
-	/* NEW_FA initially holds only MEM.  */
-	new_fa->mem = mem;
-	new_fa->size = size;
-
-	/* Insert NEW_FA in the free-list between PREV and FA. */
-	new_fa->next = fa;
-	if (prev)
-		prev->next = new_fa;
-	else
-		mb_sram_free_areas = new_fa;
-
- done:
-	spin_unlock_irqrestore (mb_sram_lock, flags);
-}
-
-
-/* Maintainence of CPU -> Mother-A DMA mappings.  */
-
-struct dma_mapping {
-	void *cpu_addr;
-	void *mb_sram_addr;
-	size_t size;
-	struct dma_mapping *next;
-};
-
-/* A list of mappings from CPU addresses to MB SRAM addresses for active
-   DMA blocks (that have been `granted' to the PCI device).  */
-static struct dma_mapping *active_dma_mappings = 0;
-
-/* A list of free mapping objects.  */
-static struct dma_mapping *free_dma_mappings = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(dma_mappings_lock);
-
-static struct dma_mapping *new_dma_mapping (size_t size)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping;
-	void *mb_sram_block = alloc_mb_sram (size);
-
-	if (! mb_sram_block)
-		return 0;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	if (! free_dma_mappings) {
-		/* We're out of mapping structures, make more.  */
-		void *mblock;
-		size_t mblock_size = sizeof (struct dma_mapping) * 8;
-
-		/* Don't hold the lock while calling kmalloc (I'm not
-		   sure whether it would be a problem, since we use
-		   GFP_ATOMIC, but it makes me nervous).  */
-		spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-		mblock = kmalloc (mblock_size, GFP_ATOMIC);
-		if (! mblock) {
-			free_mb_sram (mb_sram_block, size);
-			return 0;
-		}
-
-		/* Get the lock back.  */
-		spin_lock_irqsave (dma_mappings_lock, flags);
-
-		/* Add the new mapping structures to the free-list.  */
-		while (mblock_size > 0) {
-			struct dma_mapping *fm = mblock;
-			fm->next = free_dma_mappings;
-			free_dma_mappings = fm;
-			mblock += sizeof *fm;
-			mblock_size -= sizeof *fm;
-		}
-	}
-
-	/* Get a mapping struct from the freelist.  */
-	mapping = free_dma_mappings;
-	free_dma_mappings = mapping->next;
-
-	/* Initialize the mapping.  Other fields should be filled in by
-	   caller.  */
-	mapping->mb_sram_addr = mb_sram_block;
-	mapping->size = size;
-
-	/* Add it to the list of active mappings.  */
-	mapping->next = active_dma_mappings;
-	active_dma_mappings = mapping;
-
-	spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-	return mapping;
-}
-
-static struct dma_mapping *find_dma_mapping (void *mb_sram_addr)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	for (mapping = active_dma_mappings; mapping; mapping = mapping->next)
-		if (mapping->mb_sram_addr == mb_sram_addr) {
-			spin_unlock_irqrestore (dma_mappings_lock, flags);
-			return mapping;
-		}
-
-	panic ("find_dma_mapping: unmapped PCI DMA addr 0x%x",
-	       MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-static struct dma_mapping *deactivate_dma_mapping (void *mb_sram_addr)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping, *prev;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	for (prev = 0, mapping = active_dma_mappings;
-	     mapping;
-	     prev = mapping, mapping = mapping->next)
-	{
-		if (mapping->mb_sram_addr == mb_sram_addr) {
-			/* This is the MAPPING; deactivate it.  */
-			if (prev)
-				prev->next = mapping->next;
-			else
-				active_dma_mappings = mapping->next;
-
-			spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-			return mapping;
-		}
-	}
-
-	panic ("deactivate_dma_mapping: unmapped PCI DMA addr 0x%x",
-	       MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-/* Return MAPPING to the freelist.  */
-static inline void
-free_dma_mapping (struct dma_mapping *mapping)
-{
-	unsigned long flags;
-
-	free_mb_sram (mapping->mb_sram_addr, mapping->size);
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	mapping->next = free_dma_mappings;
-	free_dma_mappings = mapping;
-
-	spin_unlock_irqrestore (dma_mappings_lock, flags);
-}
-
-
-/* Single PCI DMA mappings.  */
-
-/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
-   32-bit PCI bus mastering address to use is returned.  the device owns
-   this memory until either pci_unmap_single or pci_dma_sync_single is
-   performed.  */
-dma_addr_t
-pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
-{
-	struct dma_mapping *mapping = new_dma_mapping (size);
-
-	if (! mapping)
-		return 0;
-
-	mapping->cpu_addr = cpu_addr;
-
-	if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_TODEVICE)
-		memcpy (mapping->mb_sram_addr, cpu_addr, size);
-
-	return MB_SRAM_TO_PCI (mapping->mb_sram_addr);
-}
-
-/* Return to the CPU the PCI DMA memory block previously `granted' to
-   PDEV, at DMA_ADDR.  */
-void pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		       int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = deactivate_dma_mapping (mb_sram_addr);
-
-	if (size != mapping->size)
-		panic ("pci_unmap_single: size (%d) doesn't match"
-		       " size of mapping at PCI DMA addr 0x%x (%d)\n",
-		       size, dma_addr, mapping->size);
-
-	/* Copy back the DMA'd contents if necessary.  */
-	if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_FROMDEVICE)
-		memcpy (mapping->cpu_addr, mb_sram_addr, size);
-
-	/* Return mapping to the freelist.  */
-	free_dma_mapping (mapping);
-}
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-void
-pci_dma_sync_single_for_cpu (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		     int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-	/* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-	if (dir == PCI_DMA_FROMDEVICE)
-		memcpy (mapping->cpu_addr, mb_sram_addr, size);
-	else if (dir == PCI_DMA_TODEVICE)
-		; /* nothing to do */
-	else
-		panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-void
-pci_dma_sync_single_for_device (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-				int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-	/* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-	if (dir == PCI_DMA_FROMDEVICE)
-		; /* nothing to do */
-	else if (dir == PCI_DMA_TODEVICE)
-		memcpy (mb_sram_addr, mapping->cpu_addr, size);
-	else
-		panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-
-/* Scatter-gather PCI DMA mappings.  */
-
-/* Do multiple DMA mappings at once.  */
-int
-pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir)
-{
-	BUG ();
-	return 0;
-}
-
-/* Unmap multiple DMA mappings at once.  */
-void
-pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,int dir)
-{
-	BUG ();
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_* but
-   for a scatter-gather list, same rules and usage.  */
-
-void
-pci_dma_sync_sg_for_cpu (struct pci_dev *dev,
-			 struct scatterlist *sg, int sg_len,
-			 int dir)
-{
-	BUG ();
-}
-
-void
-pci_dma_sync_sg_for_device (struct pci_dev *dev,
-			    struct scatterlist *sg, int sg_len,
-			    int dir)
-{
-	BUG ();
-}
-
-
-/* PCI mem mapping.  */
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDR to the pci side dma address as well,
-   else DMA_ADDR is undefined.  */
-void *
-pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr)
-{
-	void *mb_sram_mem = alloc_mb_sram (size);
-	if (mb_sram_mem)
-		*dma_addr = MB_SRAM_TO_PCI (mb_sram_mem);
-	return mb_sram_mem;
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must be
-   the same as what as passed into pci_alloc_consistent.  References to
-   the memory and mappings associated with CPU_ADDR or DMA_ADDR past
-   this call are illegal.  */
-void
-pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
-		     dma_addr_t dma_addr)
-{
-	void *mb_sram_mem = PCI_TO_MB_SRAM (dma_addr);
-	free_mb_sram (mb_sram_mem, size);
-}
-
-
-/* iomap/iomap */
-
-void __iomem *pci_iomap (struct pci_dev *dev, int bar, unsigned long max)
-{
-	resource_size_t start = pci_resource_start (dev, bar);
-	resource_size_t len = pci_resource_len (dev, bar);
-
-	if (!start || len == 0)
-		return 0;
-
-	/* None of the ioremap functions actually do anything, other than
-	   re-casting their argument, so don't bother differentiating them.  */
-	return ioremap (start, len);
-}
-
-void pci_iounmap (struct pci_dev *dev, void __iomem *addr)
-{
-	/* nothing */
-}
-
-
-/* symbol exports (for modules) */
-
-EXPORT_SYMBOL (pci_map_single);
-EXPORT_SYMBOL (pci_unmap_single);
-EXPORT_SYMBOL (pci_alloc_consistent);
-EXPORT_SYMBOL (pci_free_consistent);
-EXPORT_SYMBOL (pci_dma_sync_single_for_cpu);
-EXPORT_SYMBOL (pci_dma_sync_single_for_device);
-EXPORT_SYMBOL (pci_iomap);
-EXPORT_SYMBOL (pci_iounmap);
diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
deleted file mode 100644
index 46803d48dff..00000000000
--- a/arch/v850/kernel/rte_me2_cb.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * arch/v850/kernel/rte_me2_cb.c -- Midas labs RTE-V850E/ME2-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/me2.h>
-#include <asm/rte_me2_cb.h>
-#include <asm/machdep.h>
-#include <asm/v850e_intc.h>
-#include <asm/v850e_cache.h>
-#include <asm/irq.h>
-
-#include "mach.h"
-
-extern unsigned long *_intv_start;
-extern unsigned long *_intv_end;
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-
-/* SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START 	SDRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_me2_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-V850E/ME2-CB connects some general-purpose I/O
-	   pins on the CPU to the RTS/CTS lines of UARTB channel 0's
-	   serial connection.
-	   I/O pins P21 and P22 are RTS and CTS respectively.  */
-	if (chan == 0) {
-		/* Put P21 & P22 in I/O port mode.  */
-		ME2_PORT2_PMC &= ~0x6;
-		/* Make P21 and output, and P22 an input.  */
-		ME2_PORT2_PM = (ME2_PORT2_PM & ~0xC) | 0x4;
-	}
-
-	me2_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	/* Initialize interrupts.  */
-	me2_init_irqs ();
-	rte_me2_cb_init_irqs ();
-}
-
-#ifdef CONFIG_ROM_KERNEL
-/* Initialization for kernel in ROM.  */
-static inline rom_kernel_init (void)
-{
-	/* If the kernel is in ROM, we have to copy any initialized data
-	   from ROM into RAM.  */
-	extern unsigned long _data_load_start, _sdata, _edata;
-	register unsigned long *src = &_data_load_start;
-	register unsigned long *dst = &_sdata, *end = &_edata;
-
-	while (dst != end)
-		*dst++ = *src++;
-}
-#endif /* CONFIG_ROM_KERNEL */
-
-static void install_interrupt_vectors (void)
-{
-	unsigned long *p1, *p2;
-
-	ME2_IRAMM = 0x03; /* V850E/ME2 iRAM write mode */
-
-	/* vector copy to iRAM */
-	p1 = (unsigned long *)0; /* v85x vector start */
-	p2 = (unsigned long *)&_intv_start;
-	while (p2 < (unsigned long *)&_intv_end)
-		*p1++ = *p2++;
-
-	ME2_IRAMM = 0x00; /* V850E/ME2 iRAM read mode */
-}
-
-/* CompactFlash */
-
-static void cf_power_on (void)
-{
-	/* CF card detected? */
-	if (CB_CF_STS0 & 0x0030)
-		return;
-
-	CB_CF_REG0 = 0x0002; /* reest on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0003; /* power on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0001; /* reset off */
-	mdelay (10);
-}
-
-static void cf_power_off (void)
-{
-	CB_CF_REG0 = 0x0003; /* power on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0002; /* reest on */
-	mdelay (10);
-}
-
-void __init mach_early_init (void)
-{
-	install_interrupt_vectors ();
-
-	/* CS1 SDRAM instruction cache enable */
-	v850e_cache_enable (0x04, 0x03, 0);
-
-	rte_cb_early_init ();
-
-	/* CompactFlash power on */
-	cf_power_on ();
-
-#if defined (CONFIG_ROM_KERNEL)
-	rom_kernel_init ();
-#endif
-}
-
-
-/* RTE-V850E/ME2-CB Programmable Interrupt Controller.  */
-
-static struct cb_pic_irq_init cb_pic_irq_inits[] = {
-	{ "CB_EXTTM0",       IRQ_CB_EXTTM0,       1, 1, 6 },
-	{ "CB_EXTSIO",       IRQ_CB_EXTSIO,       1, 1, 6 },
-	{ "CB_TOVER",        IRQ_CB_TOVER,        1, 1, 6 },
-	{ "CB_GINT0",        IRQ_CB_GINT0,        1, 1, 6 },
-	{ "CB_USB",          IRQ_CB_USB,          1, 1, 6 },
-	{ "CB_LANC",         IRQ_CB_LANC,         1, 1, 6 },
-	{ "CB_USB_VBUS_ON",  IRQ_CB_USB_VBUS_ON,  1, 1, 6 },
-	{ "CB_USB_VBUS_OFF", IRQ_CB_USB_VBUS_OFF, 1, 1, 6 },
-	{ "CB_EXTTM1",       IRQ_CB_EXTTM1,       1, 1, 6 },
-	{ "CB_EXTTM2",       IRQ_CB_EXTTM2,       1, 1, 6 },
-	{ 0 }
-};
-#define NUM_CB_PIC_IRQ_INITS (ARRAY_SIZE(cb_pic_irq_inits) - 1)
-
-static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS];
-static unsigned char cb_pic_active_irqs = 0;
-
-void __init rte_me2_cb_init_irqs (void)
-{
-	cb_pic_init_irq_types (cb_pic_irq_inits, cb_pic_hw_itypes);
-
-	/* Initalize on board PIC1 (not PIC0) enable */
-	CB_PIC_INT0M  = 0x0000;
-	CB_PIC_INT1M  = 0x0000;
-	CB_PIC_INTR   = 0x0000;
-	CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-	ME2_PORT2_PMC 	 |= 0x08;	/* INTP23/SCK1 mode */
-	ME2_PORT2_PFC 	 &= ~0x08;	/* INTP23 mode */
-	ME2_INTR(2) 	 &= ~0x08;	/* INTP23 falling-edge detect */
-	ME2_INTF(2) 	 &= ~0x08;	/*   " */
-
-	rte_cb_init_irqs ();	/* gbus &c */
-}
-
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void cb_pic_enable_irq (unsigned irq)
-{
-	CB_PIC_INT1M |= 1 << (irq - CB_PIC_BASE_IRQ);
-}
-
-void cb_pic_disable_irq (unsigned irq)
-{
-	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-void cb_pic_shutdown_irq (unsigned irq)
-{
-	cb_pic_disable_irq (irq);
-
-	if (--cb_pic_active_irqs == 0)
-		free_irq (IRQ_CB_PIC, 0);
-
-	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-static irqreturn_t cb_pic_handle_irq (int irq, void *dev_id,
-				      struct pt_regs *regs)
-{
-	irqreturn_t rval = IRQ_NONE;
-	unsigned status = CB_PIC_INTR;
-	unsigned enable = CB_PIC_INT1M;
-
-	/* Only pay attention to enabled interrupts.  */
-	status &= enable;
-
-	CB_PIC_INTEN &= ~CB_PIC_INT1EN;
-
-	if (status) {
-		unsigned mask = 1;
-
-		irq = CB_PIC_BASE_IRQ;
-		do {
-			/* There's an active interrupt, find out which one,
-			   and call its handler.  */
-			while (! (status & mask)) {
-				irq++;
-				mask <<= 1;
-			}
-			status &= ~mask;
-
-			CB_PIC_INTR = mask;
-
-			/* Recursively call handle_irq to handle it. */
-			handle_irq (irq, regs);
-			rval = IRQ_HANDLED;
-		} while (status);
-	}
-
-	CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-	return rval;
-}
-
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned cb_pic_startup_irq (unsigned irq)
-{
-	int rval;
-
-	if (cb_pic_active_irqs == 0) {
-		rval = request_irq (IRQ_CB_PIC, cb_pic_handle_irq,
-				    IRQF_DISABLED, "cb_pic_handler", 0);
-		if (rval != 0)
-			return rval;
-	}
-
-	cb_pic_active_irqs++;
-
-	cb_pic_enable_irq (irq);
-
-	return 0;
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
-				   struct hw_interrupt_type *hw_irq_types)
-{
-	struct cb_pic_irq_init *init;
-	for (init = inits; init->name; init++) {
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = cb_pic_startup_irq;
-		hwit->shutdown = cb_pic_shutdown_irq;
-		hwit->enable   = cb_pic_enable_irq;
-		hwit->disable  = cb_pic_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = irq_nop;
-
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-	}
-}
diff --git a/arch/v850/kernel/rte_me2_cb.ld b/arch/v850/kernel/rte_me2_cb.ld
deleted file mode 100644
index cf0766065ec..00000000000
--- a/arch/v850/kernel/rte_me2_cb.ld
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/ME2-CB evaluation board
-   (CONFIG_RTE_CB_ME2), with kernel in SDRAM.  */
-
-MEMORY {
-	/* 128Kbyte of IRAM */
-	IRAM : ORIGIN = 0x00000000, LENGTH = 0x00020000
-
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#define KRAM SDRAM
-
-SECTIONS {
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-		INTV_CONTENTS	/* copy to iRAM (0x0-0x620) */
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-	} > KRAM
-	
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb-multi.ld b/arch/v850/kernel/rte_nb85e_cb-multi.ld
deleted file mode 100644
index de347b4fffa..00000000000
--- a/arch/v850/kernel/rte_nb85e_cb-multi.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E), with the Multi debugger ROM monitor .  */
-
-MEMORY {
-	/* 1MB of SRAM; we can't use the last 96KB, because it's used by
-	   the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-	/* Monitor scratch RAM; only the interrupt vectors should go here.  */
-	MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-	/* 16MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	/* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-	   kernel in a single ELF segment, and the Multi debugger (which
-	   we use to load the kernel) appears to have bizarre problems
-	   dealing with it.  */
-
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-
-		/* The address at which the interrupt vectors are initially
-		   loaded by the loader.  We can't load the interrupt vectors
-		   directly into their target location, because the monitor
-		   ROM for the GHS Multi debugger barfs if we try.
-		   Unfortunately, Multi also doesn't deal correctly with ELF
-		   sections where the LMA and VMA differ (it just ignores the
-		   LMA), so we can't use that feature to work around the
-		   problem!  What we do instead is just put the interrupt
-		   vectors into a normal section, and have the
-		   `mach_early_init' function for Midas boards do the
-		   necessary copying and relocation at runtime (this section
-		   basically only contains `jr' instructions, so it's not
-		   that hard).  */
-		. = ALIGN (0x10) ;
-		__intv_load_start = . ;
-		INTV_CONTENTS
-	} > KRAM
-
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.c b/arch/v850/kernel/rte_nb85e_cb.c
deleted file mode 100644
index b4a045da5d7..00000000000
--- a/arch/v850/kernel/rte_nb85e_cb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/v850/kernel/rte_nb85e_cb.c -- Midas labs RTE-V850E/NB85E-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e.h>
-#include <asm/rte_nb85e_cb.h>
-
-#include "mach.h"
-
-void __init mach_early_init (void)
-{
-	/* Configure caching; some possible settings:
-
-	     BHC = 0x0000, DCC = 0x0000	 -- all caching disabled
-	     BHC = 0x0040, DCC = 0x0000	 -- SDRAM: icache only
-	     BHC = 0x0080, DCC = 0x0C00	 -- SDRAM: write-back dcache only
-	     BHC = 0x00C0, DCC = 0x0C00	 -- SDRAM: icache + write-back dcache
-	     BHC = 0x00C0, DCC = 0x0800	 -- SDRAM: icache + write-thru dcache
-
-	   We can only cache SDRAM (we can't use cache SRAM because it's in
-	   the same memory region as the on-chip RAM and I/O space).
-
-	   Unfortunately, the dcache seems to be buggy, so we only use the
-	   icache for now.  */
-	v850e_cache_enable (0x0040 /*BHC*/, 0x0003 /*ICC*/, 0x0000 /*DCC*/);
-
-	rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	/* We just use SDRAM here.  */
-	*ram_start = SDRAM_ADDR;
-	*ram_len = SDRAM_SIZE;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_nb85e_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-NB85E-CB connects some general-purpose I/O pins on the
-	   CPU to the RTS/CTS lines the UART's serial connection, as follows:
-	   P00 = CTS (in), P01 = DSR (in), P02 = RTS (out), P03 = DTR (out). */
-
-	TEG_PORT0_PM = 0x03;	/* P00 and P01 inputs, P02 and P03 outputs */
-	TEG_PORT0_IO = 0x03;	/* Accept input */
-
-	/* Do pre-configuration for the actual UART.  */
-	teg_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	teg_init_irqs ();
-	rte_cb_init_irqs ();
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.ld b/arch/v850/kernel/rte_nb85e_cb.ld
deleted file mode 100644
index b672f484f08..00000000000
--- a/arch/v850/kernel/rte_nb85e_cb.ld
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E).  */
-
-MEMORY {
-	LOW   : ORIGIN = 0x0,	     LENGTH = 0x00100000
-	/* 1MB of SRAM  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 16MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > LOW
-	.sram : { RAMK_KRAM_CONTENTS } > KRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c
deleted file mode 100644
index a0a8456a843..00000000000
--- a/arch/v850/kernel/setup.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * arch/v850/kernel/setup.c -- Arch-dependent initialization functions
- *
- *  Copyright (C) 2001,02,03,05,06  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05,06  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/swap.h>		/* we don't have swap, but for nr_free_pages */
-#include <linux/irq.h>
-#include <linux/reboot.h>
-#include <linux/personality.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/mtd/mtd.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include "mach.h"
-
-/* These symbols are all defined in the linker map to delineate various
-   statically allocated regions of memory.  */
-
-extern char _intv_start, _intv_end;
-/* `kram' is only used if the kernel uses part of normal user RAM.  */
-extern char _kram_start __attribute__ ((__weak__));
-extern char _kram_end __attribute__ ((__weak__));
-extern char _init_start, _init_end;
-extern char _bootmap;
-extern char _stext, _etext, _sdata, _edata, _sbss, _ebss;
-/* Many platforms use an embedded root image.  */
-extern char _root_fs_image_start __attribute__ ((__weak__));
-extern char _root_fs_image_end __attribute__ ((__weak__));
-
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-/* Memory not used by the kernel.  */
-static unsigned long total_ram_pages;
-
-/* System RAM.  */
-static unsigned long ram_start = 0, ram_len = 0;
-
-
-#define ADDR_TO_PAGE_UP(x)   ((((unsigned long)x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define ADDR_TO_PAGE(x)	     (((unsigned long)x) >> PAGE_SHIFT)
-#define PAGE_TO_ADDR(x)	     (((unsigned long)x) << PAGE_SHIFT)
-
-static void init_mem_alloc (unsigned long ram_start, unsigned long ram_len);
-
-void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-
-void __init setup_arch (char **cmdline)
-{
-	/* Keep a copy of command line */
-	*cmdline = command_line;
-	memcpy (boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
-	console_verbose ();
-
-	init_mm.start_code = (unsigned long) &_stext;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_kram_end;
-
-	/* Find out what mem this machine has.  */
-	mach_get_physical_ram (&ram_start, &ram_len);
-	/* ... and tell the kernel about it.  */
-	init_mem_alloc (ram_start, ram_len);
-
-	printk (KERN_INFO "CPU: %s\nPlatform: %s\n",
-		CPU_MODEL_LONG, PLATFORM_LONG);
-
-	/* do machine-specific setups.  */
-	mach_setup (cmdline);
-
-#ifdef CONFIG_MTD
-	if (!ROOT_DEV && &_root_fs_image_end > &_root_fs_image_start)
-		set_mem_root (&_root_fs_image_start,
-			      &_root_fs_image_end - &_root_fs_image_start,
-			      *cmdline);
-#endif
-}
-
-void __init trap_init (void)
-{
-}
-
-#ifdef CONFIG_MTD
-
-/* From drivers/mtd/devices/slram.c */
-#define SLRAM_BLK_SZ 0x4000
-
-/* Set the root filesystem to be the given memory region.
-   Some parameter may be appended to CMD_LINE.  */
-void set_mem_root (void *addr, size_t len, char *cmd_line)
-{
-	/* Some sort of idiocy in MTD means we must supply a length that's
-	   a multiple of SLRAM_BLK_SZ.  We just round up the real length,
-	   as the file system shouldn't attempt to access anything beyond
-	   the end of the image anyway.  */
-	len = (((len - 1) + SLRAM_BLK_SZ) / SLRAM_BLK_SZ) * SLRAM_BLK_SZ;
-
-	/* The only way to pass info to the MTD slram driver is via
-	   the command line.  */
-	if (*cmd_line) {
-		cmd_line += strlen (cmd_line);
-		*cmd_line++ = ' ';
-	}
-	sprintf (cmd_line, "slram=root,0x%x,+0x%x", (u32)addr, (u32)len);
-
-	ROOT_DEV = MKDEV (MTD_BLOCK_MAJOR, 0);
-}
-#endif
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static void nmi_end (unsigned irq)
-{
-	if (irq != IRQ_NMI (0)) {
-		printk (KERN_CRIT "NMI %d is unrecoverable; restarting...",
-			irq - IRQ_NMI (0));
-		machine_restart (0);
-	}
-}
-
-static struct hw_interrupt_type nmi_irq_type = {
-	.typename = "NMI",
-	.startup = irq_zero,		/* startup */
-	.shutdown = irq_nop,		/* shutdown */
-	.enable = irq_nop,		/* enable */
-	.disable = irq_nop,		/* disable */
-	.ack = irq_nop,		/* ack */
-	.end = nmi_end,		/* end */
-};
-
-void __init init_IRQ (void)
-{
-	init_irq_handlers (0, NUM_MACH_IRQS, 1, 0);
-	init_irq_handlers (IRQ_NMI (0), NUM_NMIS, 1, &nmi_irq_type);
-	mach_init_irqs ();
-}
-
-
-void __init mem_init (void)
-{
-	max_mapnr = MAP_NR (ram_start + ram_len);
-
-	num_physpages = ADDR_TO_PAGE (ram_len);
-
-	total_ram_pages = free_all_bootmem ();
-
-	printk (KERN_INFO
-		"Memory: %luK/%luK available"
-		" (%luK kernel code, %luK data)\n",
-		PAGE_TO_ADDR (nr_free_pages()) / 1024,
-		ram_len / 1024,
-		((unsigned long)&_etext - (unsigned long)&_stext) / 1024,
-		((unsigned long)&_ebss - (unsigned long)&_sdata) / 1024);
-}
-
-void free_initmem (void)
-{
-	unsigned long ram_end = ram_start + ram_len;
-	unsigned long start = PAGE_ALIGN ((unsigned long)(&_init_start));
-
-	if (start >= ram_start && start < ram_end) {
-		unsigned long addr;
-		unsigned long end = PAGE_ALIGN ((unsigned long)(&_init_end));
-
-		if (end > ram_end)
-			end = ram_end;
-
-		printk("Freeing unused kernel memory: %ldK freed\n",
-		       (end - start) / 1024);
-
-		for (addr = start; addr < end; addr += PAGE_SIZE) {
-			struct page *page = virt_to_page (addr);
-			ClearPageReserved (page);
-			init_page_count (page);
-			__free_page (page);
-			total_ram_pages++;
-		}
-	}
-}
-
-
-/* Initialize the `bootmem allocator'.  RAM_START and RAM_LEN identify
-   what RAM may be used.  */
-static void __init
-init_bootmem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-	/* The part of the kernel that's in the same managed RAM space
-	   used for general allocation.  */
-	unsigned long kram_start = (unsigned long)&_kram_start;
-	unsigned long kram_end = (unsigned long)&_kram_end;
-	/* End of the managed RAM space.  */
-	unsigned long ram_end = ram_start + ram_len;
-	/* Address range of the interrupt vector table.  */
-	unsigned long intv_start = (unsigned long)&_intv_start;
-	unsigned long intv_end = (unsigned long)&_intv_end;
-	/* True if the interrupt vectors are in the managed RAM area.  */
-	int intv_in_ram = (intv_end > ram_start && intv_start < ram_end);
-	/* True if the interrupt vectors are inside the kernel's RAM.  */
-	int intv_in_kram = (intv_end > kram_start && intv_start < kram_end);
-	/* A pointer to an optional function that reserves platform-specific
-	   memory regions.  We declare the pointer `volatile' to avoid gcc
-	   turning the call into a static call (the problem is that since
-	   it's a weak symbol, a static call may end up trying to reference
-	   the location 0x0, which is not always reachable).  */
-	void (*volatile mrb) (void) = mach_reserve_bootmem;
-	/* The bootmem allocator's allocation bitmap.  */
-	unsigned long bootmap = (unsigned long)&_bootmap;
-	unsigned long bootmap_len;
-
-	/* Round bootmap location up to next page.  */
-	bootmap = PAGE_TO_ADDR (ADDR_TO_PAGE_UP (bootmap));
-
-	/* Initialize bootmem allocator.  */
-	bootmap_len = init_bootmem_node (NODE_DATA (0),
-					 ADDR_TO_PAGE (bootmap),
-					 ADDR_TO_PAGE (PAGE_OFFSET),
-					 ADDR_TO_PAGE (ram_end));
-
-	/* Now make the RAM actually allocatable (it starts out `reserved'). */
-	free_bootmem (ram_start, ram_len);
-
-	if (kram_end > kram_start)
-		/* Reserve the RAM part of the kernel's address space, so it
-		   doesn't get allocated.  */
-		reserve_bootmem(kram_start, kram_end - kram_start,
-				BOOTMEM_DEFAULT);
-	
-	if (intv_in_ram && !intv_in_kram)
-		/* Reserve the interrupt vector space.  */
-		reserve_bootmem(intv_start, intv_end - intv_start,
-				BOOTMEM_DEFAULT);
-
-	if (bootmap >= ram_start && bootmap < ram_end)
-		/* Reserve the bootmap space.  */
-		reserve_bootmem(bootmap, bootmap_len,
-				BOOTMEM_DEFAULT);
-
-	/* Reserve the memory used by the root filesystem image if it's
-	   in RAM.  */
-	if (&_root_fs_image_end > &_root_fs_image_start
-	    && (unsigned long)&_root_fs_image_start >= ram_start
-	    && (unsigned long)&_root_fs_image_start < ram_end)
-		reserve_bootmem ((unsigned long)&_root_fs_image_start,
-				 &_root_fs_image_end - &_root_fs_image_start,
-				 BOOTMEM_DEFAULT);
-
-	/* Let the platform-dependent code reserve some too.  */
-	if (mrb)
-		(*mrb) ();
-}
-
-/* Tell the kernel about what RAM it may use for memory allocation.  */
-static void __init
-init_mem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-	unsigned i;
-	unsigned long zones_size[MAX_NR_ZONES];
-
-	init_bootmem_alloc (ram_start, ram_len);
-
-	for (i = 0; i < MAX_NR_ZONES; i++)
-		zones_size[i] = 0;
-
-	/* We stuff all the memory into one area, which includes the
-	   initial gap from PAGE_OFFSET to ram_start.  */
-	zones_size[ZONE_DMA]
-		= ADDR_TO_PAGE (ram_len + (ram_start - PAGE_OFFSET));
-
-	/* The allocator is very picky about the address of the first
-	   allocatable page -- it must be at least as aligned as the
-	   maximum allocation -- so try to detect cases where it will get
-	   confused and signal them at compile time (this is a common
-	   problem when porting to a new platform with ).  There is a
-	   similar runtime check in free_area_init_core.  */
-#if ((PAGE_OFFSET >> PAGE_SHIFT) & ((1UL << (MAX_ORDER - 1)) - 1))
-#error MAX_ORDER is too large for given PAGE_OFFSET (use CONFIG_FORCE_MAX_ZONEORDER to change it)
-#endif
-	NODE_DATA(0)->node_mem_map = NULL;
-	free_area_init_node (0, NODE_DATA(0), zones_size,
-			     ADDR_TO_PAGE (PAGE_OFFSET), 0);
-}
-
-
-
-/* Taken from m68knommu */
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
diff --git a/arch/v850/kernel/signal.c b/arch/v850/kernel/signal.c
deleted file mode 100644
index bf166e7e762..00000000000
--- a/arch/v850/kernel/signal.c
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- * arch/v850/kernel/signal.c -- Signal handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1999,2000,2002  Niibe Yutaka & Kaz Kojima
- *  Copyright (C) 1991,1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * 1997-11-28  Modified for POSIX.1b signals by Richard Henderson
- *
- * This file was derived from the sh version, arch/sh/kernel/signal.c
- */
-
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/thread_info.h>
-#include <asm/cacheflush.h>
-
-#define DEBUG_SIG 0
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gpr[GPR_RVAL] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
-		  struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gpr[GPR_RVAL] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int 
-sys_sigaction(int sig, const struct old_sigaction *act,
-	      struct old_sigaction *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(const stack_t *uss, stack_t *uoss,
-		struct pt_regs *regs)
-{
-	return do_sigaltstack(uss, uoss, regs->gpr[GPR_SP]);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-struct sigframe
-{
-	struct sigcontext sc;
-	unsigned long extramask[_NSIG_WORDS-1];
-	unsigned long tramp[2];	/* signal trampoline */
-};
-
-struct rt_sigframe
-{
-	struct siginfo info;
-	struct ucontext uc;
-	unsigned long tramp[2];	/* signal trampoline */
-};
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
-{
-	unsigned int err = 0;
-
-#define COPY(x)		err |= __get_user(regs->x, &sc->regs.x)
-	COPY(gpr[0]);	COPY(gpr[1]);	COPY(gpr[2]);	COPY(gpr[3]);
-	COPY(gpr[4]);	COPY(gpr[5]);	COPY(gpr[6]);	COPY(gpr[7]);
-	COPY(gpr[8]);	COPY(gpr[9]);	COPY(gpr[10]);	COPY(gpr[11]);
-	COPY(gpr[12]);	COPY(gpr[13]);	COPY(gpr[14]);	COPY(gpr[15]);
-	COPY(gpr[16]);	COPY(gpr[17]);	COPY(gpr[18]);	COPY(gpr[19]);
-	COPY(gpr[20]);	COPY(gpr[21]);	COPY(gpr[22]);	COPY(gpr[23]);
-	COPY(gpr[24]);	COPY(gpr[25]);	COPY(gpr[26]);	COPY(gpr[27]);
-	COPY(gpr[28]);	COPY(gpr[29]);	COPY(gpr[30]);	COPY(gpr[31]);
-	COPY(pc);	COPY(psw);
-	COPY(ctpc);	COPY(ctpsw);	COPY(ctbp);
-#undef COPY
-
-	return err;
-}
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe *frame = (struct sigframe *)regs->gpr[GPR_SP];
-	sigset_t set;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-	    || (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-				    sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &rval))
-		goto badframe;
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe *frame = (struct rt_sigframe *)regs->gpr[GPR_SP];
-	sigset_t set;
-	stack_t st;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
-		goto badframe;
-
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs->gpr[GPR_SP]);
-
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}	
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-		 unsigned long mask)
-{
-	int err = 0;
-
-#define COPY(x)		err |= __put_user(regs->x, &sc->regs.x)
-	COPY(gpr[0]);	COPY(gpr[1]);	COPY(gpr[2]);	COPY(gpr[3]);
-	COPY(gpr[4]);	COPY(gpr[5]);	COPY(gpr[6]);	COPY(gpr[7]);
-	COPY(gpr[8]);	COPY(gpr[9]);	COPY(gpr[10]);	COPY(gpr[11]);
-	COPY(gpr[12]);	COPY(gpr[13]);	COPY(gpr[14]);	COPY(gpr[15]);
-	COPY(gpr[16]);	COPY(gpr[17]);	COPY(gpr[18]);	COPY(gpr[19]);
-	COPY(gpr[20]);	COPY(gpr[21]);	COPY(gpr[22]);	COPY(gpr[23]);
-	COPY(gpr[24]);	COPY(gpr[25]);	COPY(gpr[26]);	COPY(gpr[27]);
-	COPY(gpr[28]);	COPY(gpr[29]);	COPY(gpr[30]);	COPY(gpr[31]);
-	COPY(pc);	COPY(psw);
-	COPY(ctpc);	COPY(ctpsw);	COPY(ctbp);
-#undef COPY
-
-	err |= __put_user(mask, &sc->oldmask);
-
-	return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
-	/* Default to using normal stack */
-	unsigned long sp = regs->gpr[GPR_SP];
-
-	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	return (void *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
-			sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-	if (_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-				      sizeof(frame->extramask));
-	}
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-	} else {
-		/* Note, these encodings are _little endian_!  */
-
-		/* addi  __NR_sigreturn, r0, r12  */
-		err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-				  frame->tramp + 0);
-		/* trap 0 */
-		err |= __put_user(0x010007e0,
-				  frame->tramp + 1);
-
-		regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-		flush_cache_sigtramp (regs->gpr[GPR_LP]);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler.  */
-	regs->pc = (v850_reg_t) ka->sa.sa_handler;
-	regs->gpr[GPR_SP] = (v850_reg_t)frame;
-	/* Signal handler args:  */
-	regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-	regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->sc;/* arg 1: sigcontext */
-
-	set_fs(USER_DS);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx ra=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, );
-#endif
-
-	return;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-}
-
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			   sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= copy_siginfo_to_user(&frame->info, info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user((void *)current->sas_ss_sp,
-			  &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->gpr[GPR_SP]),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext,
-			        regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-	} else {
-		/* Note, these encodings are _little endian_!  */
-
-		/* addi  __NR_sigreturn, r0, r12  */
-		err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-				  frame->tramp + 0);
-		/* trap 0 */
-		err |= __put_user(0x010007e0,
-				  frame->tramp + 1);
-
-		regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-		flush_cache_sigtramp (regs->gpr[GPR_LP]);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler.  */
-	regs->pc = (v850_reg_t) ka->sa.sa_handler;
-	regs->gpr[GPR_SP] = (v850_reg_t)frame;
-	/* Signal handler args:  */
-	regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-	regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->info; /* arg 1: siginfo */
-	regs->gpr[GPR_ARG2] = (v850_reg_t)&frame->uc; /* arg 2: ucontext */
-
-	set_fs(USER_DS);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
-
-	return;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-}
-
-/*
- * OK, we're invoking a handler
- */	
-
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-	      sigset_t *oldset,	struct pt_regs * regs)
-{
-	/* Are we from a system call? */
-	if (PT_REGS_SYSCALL (regs)) {
-		/* If so, check system call restarting.. */
-		switch (regs->gpr[GPR_RVAL]) {
-		case -ERESTART_RESTARTBLOCK:
-			current_thread_info()->restart_block.fn =
-				do_no_restart_syscall;
-			/* fall through */
-		case -ERESTARTNOHAND:
-			regs->gpr[GPR_RVAL] = -EINTR;
-			break;
-
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				regs->gpr[GPR_RVAL] = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			regs->gpr[12] = PT_REGS_SYSCALL (regs);
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-
-		PT_REGS_SET_SYSCALL (regs, 0);
-	}
-
-	/* Set up the stack frame */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(sig, ka, info, oldset, regs);
-	else
-		setup_frame(sig, ka, oldset, regs);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
-{
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return 1;
-
-	if (!oldset)
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
-
-	/* Did we come from a system call? */
-	if (PT_REGS_SYSCALL (regs)) {
-		int rval = (int)regs->gpr[GPR_RVAL];
-		/* Restart the system call - no handlers present */
-		if (rval == -ERESTARTNOHAND
-		    || rval == -ERESTARTSYS
-		    || rval == -ERESTARTNOINTR)
-		{
-			regs->gpr[12] = PT_REGS_SYSCALL (regs);
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-		else if (rval == -ERESTART_RESTARTBLOCK) {
-			regs->gpr[12] = __NR_restart_syscall;
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-	}
-	return 0;
-}
diff --git a/arch/v850/kernel/sim.c b/arch/v850/kernel/sim.c
deleted file mode 100644
index 467b4aa0acd..00000000000
--- a/arch/v850/kernel/sim.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/v850/kernel/sim.c -- Machine-specific stuff for GDB v850e simulator
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/simsyscall.h>
-
-#include "mach.h"
-
-/* The name of a file containing the root filesystem.  */
-#define ROOT_FS "rootfs.image"
-
-extern void simcons_setup (void);
-extern void simcons_poll_ttys (void);
-extern void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-static int read_file (const char *name,
-		      unsigned long *addr, unsigned long *len,
-		      const char **err);
-
-void __init mach_setup (char **cmdline)
-{
-	const char *err;
-	unsigned long root_dev_addr, root_dev_len;
-
-	simcons_setup ();
-
-	printk (KERN_INFO "Reading root filesystem: %s", ROOT_FS);
-
-	if (read_file (ROOT_FS, &root_dev_addr, &root_dev_len, &err)) {
-		printk (" (size %luK)\n", root_dev_len / 1024);
-		set_mem_root ((void *)root_dev_addr, (size_t)root_dev_len,
-			      *cmdline);
-	} else
-		printk ("...%s failed!\n", err);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = RAM_ADDR;
-	*ram_len = RAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* ...do magic timer initialization?...  */
-	mach_tick = simcons_poll_ttys;
-	setup_irq (0, timer_action);
-}
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static struct hw_interrupt_type sim_irq_type = {
-	.typename = "IRQ",
-	.startup = irq_zero,		/* startup */
-	.shutdown = irq_nop,		/* shutdown */
-	.enable = irq_nop,		/* enable */
-	.disable = irq_nop,		/* disable */
-	.ack = irq_nop,		/* ack */
-	.end = irq_nop,		/* end */
-};
-
-void __init mach_init_irqs (void)
-{
-	init_irq_handlers (0, NUM_MACH_IRQS, 1, &sim_irq_type);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	long timeval[2], timezone[2];
-	int rval = V850_SIM_SYSCALL (gettimeofday, timeval, timezone);
-	if (rval == 0) {
-		tv->tv_sec = timeval[0];
-		tv->tv_nsec = timeval[1] * 1000;
-	}
-}
-
-void machine_restart (char *__unused)
-{
-	V850_SIM_SYSCALL (write, 1, "RESTART\n", 8);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_halt (void)
-{
-	V850_SIM_SYSCALL (write, 1, "HALT\n", 5);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_power_off (void)
-{
-	V850_SIM_SYSCALL (write, 1, "POWER OFF\n", 10);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-
-/* Load data from a file called NAME into ram.  The address and length
-   of the data image are returned in ADDR and LEN.  */
-static int __init
-read_file (const char *name,
-	   unsigned long *addr, unsigned long *len,
-	   const char **err)
-{
-	int rval, fd;
-	unsigned long cur, left;
-	/* Note this is not a normal stat buffer, it's an ad-hoc
-	   structure defined by the simulator.  */
-	unsigned long stat_buf[10];
-
-	/* Stat the file to find out the length.  */
-	rval = V850_SIM_SYSCALL (stat, name, stat_buf);
-	if (rval < 0) {
-		if (err) *err = "stat";
-		return 0;
-	}
-	*len = stat_buf[4];
-
-	/* Open the file; `0' is O_RDONLY.  */
-	fd = V850_SIM_SYSCALL (open, name, 0);
-	if (fd < 0) {
-		if (err) *err = "open";
-		return 0;
-	}
-
-	*addr = (unsigned long)alloc_bootmem(*len);
-	if (! *addr) {
-		V850_SIM_SYSCALL (close, fd);
-		if (err) *err = "alloc_bootmem";
-		return 0;
-	}
-
-	cur = *addr;
-	left = *len;
-	while (left > 0) {
-		int chunk = V850_SIM_SYSCALL (read, fd, cur, left);
-		if (chunk <= 0)
-			break;
-		cur += chunk;
-		left -= chunk;
-	}
-	V850_SIM_SYSCALL (close, fd);
-	if (left > 0) {
-		/* Some read failed.  */
-		free_bootmem (*addr, *len);
-		if (err) *err = "read";
-		return 0;
-	}
-
-	return 1;
-}
diff --git a/arch/v850/kernel/sim.ld b/arch/v850/kernel/sim.ld
deleted file mode 100644
index 101885f3c9f..00000000000
--- a/arch/v850/kernel/sim.ld
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Linker script for the gdb v850e simulator (CONFIG_V850E_SIM).  */
-
-MEMORY {
-	/* Interrupt vectors.  */
-	INTV  : ORIGIN = 0x0, LENGTH = 0xe0
-	/* Main RAM.  */
-	RAM   : ORIGIN = RAM_ADDR, LENGTH = RAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > INTV
-	.ram : { RAMK_KRAM_CONTENTS } > RAM
-}
diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c
deleted file mode 100644
index 566dde5e607..00000000000
--- a/arch/v850/kernel/sim85e2.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-
-/* There are 4 possible areas we can use:
-
-     IRAM (1MB) is fast for instruction fetches, but slow for data
-     DRAM (1020KB) is fast for data, but slow for instructions
-     ERAM is cached, so should be fast for both insns and data
-     SDRAM is external DRAM, similar to ERAM
-*/
-
-#define INIT_MEMC_FOR_SDRAM
-#define USE_SDRAM_AREA
-#define KERNEL_IN_SDRAM_AREA
-
-#define DCACHE_MODE	V850E2_CACHE_BTSC_DCM_WT
-/*#define DCACHE_MODE	V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
-
-#ifdef USE_SDRAM_AREA
-#define RAM_START 	SDRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-#else
-/* When we use DRAM, we need to account for the fact that the end of it is
-   used for R0_RAM.  */
-#define RAM_START	DRAM_ADDR
-#define RAM_END		R0_RAM_ADDR
-#endif
-
-
-extern void memcons_setup (void);
-
-
-#ifdef KERNEL_IN_SDRAM_AREA
-#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
-#else
-#define EARLY_INIT_SECTION_ATTR __init
-#endif
-
-void EARLY_INIT_SECTION_ATTR mach_early_init (void)
-{
-	/* The sim85e2 simulator tracks `undefined' values, so to make
-	   debugging easier, we begin by zeroing out all otherwise
-	   undefined registers.  This is not strictly necessary.
-
-	   The registers we zero are:
-	       Every GPR except:
-	           stack-pointer (r3)
-		   task-pointer (r16)
-		   our return addr (r31)
-	       Every system register (SPR) that we know about except for
-	       the PSW (SPR 5), which we zero except for the
-	       disable-interrupts bit.
-	*/
-
-	/* GPRs */
-	asm volatile ("             mov r0, r1 ; mov r0, r2              ");
-	asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
-	asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
-	asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
-	asm volatile ("             mov r0, r17; mov r0, r18; mov r0, r19");
-	asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
-	asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
-	asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
-
-	/* SPRs */
-	asm volatile ("ldsr r0, 0;  ldsr r0, 1;  ldsr r0, 2;  ldsr r0, 3");
-	asm volatile ("ldsr r0, 4");
-	asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
-	asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
-	asm volatile ("ldsr r0, 20");
-
-
-#ifdef INIT_MEMC_FOR_SDRAM
-	/* Settings for SDRAM controller.  */
-	V850E2_VSWC   = 0x0042;
-	V850E2_BSC    = 0x9286;
-	V850E2_BCT(0) = 0xb000;	/* was: 0 */
-	V850E2_BCT(1) = 0x000b;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0xa9aa;	/* was: 0xaaaa */
-	V850E2_LBC(0) = 0;
-	V850E2_LBC(1) = 0;	/* was: 0x3 */
-	V850E2_BCC    = 0;
-	V850E2_RFS(4) = 0x800a;	/* was: 0xf109 */
-	V850E2_SCR(4) = 0x2091;	/* was: 0x20a1 */
-	V850E2_RFS(3) = 0x800c;
-	V850E2_SCR(3) = 0x20a1;
-	V850E2_DWC(0) = 0;
-	V850E2_DWC(1) = 0;
-#endif
-
-#if 0
-#ifdef CONFIG_V850E2_SIM85E2S
-	/* Turn on the caches.  */
-	V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
-	V850E2_BHC  = 0x1010;
-#elif CONFIG_V850E2_SIM85E2C
-	V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
-	V850E2_BUSM_BHC = 0xFFFF;
-#endif
-#else
-	V850E2_BHC  = 0;
-#endif
-
-	/* Don't stop the simulator at `halt' instructions.  */
-	SIM85E2_NOTHAL = 1;
-
-	/* Ensure that the simulator halts on a panic, instead of going
-	   into an infinite loop inside the panic function.  */
-	panic_timeout = -1;
-}
-
-void __init mach_setup (char **cmdline)
-{
-	memcons_setup ();
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* The simulator actually cycles through all interrupts
-	   periodically.  We just pay attention to IRQ0, which gives us
-	   1/64 the rate of the periodic interrupts.  */
-	setup_irq (0, timer_action);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
-	{ 0 }
-};
-struct hw_interrupt_type hw_itypes[1];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-	SIM85E2_SIMFIN = 0;	/* Halt immediately.  */
-	for (;;) {}
-}
-
-void machine_restart (char *__unused)
-{
-	machine_halt ();
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
diff --git a/arch/v850/kernel/sim85e2.ld b/arch/v850/kernel/sim85e2.ld
deleted file mode 100644
index 7470fd2ffb5..00000000000
--- a/arch/v850/kernel/sim85e2.ld
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Linker script for the sim85e2c simulator, which is a verilog simulation of
-   the V850E2 NA85E2C cpu core (CONFIG_V850E2_SIM85E2C).  */
-
-MEMORY {
-	/* 1MB of `instruction RAM', starting at 0.
-	   Instruction fetches are much faster from IRAM than from DRAM.  */
-	IRAM : ORIGIN = IRAM_ADDR, LENGTH = IRAM_SIZE
-
-	/* 1MB of `data RAM', below and contiguous with the I/O space.
-	   Data fetches are much faster from DRAM than from IRAM.  */
-	DRAM : ORIGIN = DRAM_ADDR, LENGTH = DRAM_SIZE
-
-	/* `external ram' (CS1 area), comes after IRAM.  */
-	ERAM : ORIGIN = ERAM_ADDR, LENGTH = ERAM_SIZE
-
-	/* Dynamic RAM; uses memory controller.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.iram : {
-		INTV_CONTENTS
-		*arch/v850/kernel/head.o
-		*(.early.text)
-	} > IRAM
-	.dram : {
-		_memcons_output = . ;
-		. = . + 0x8000 ;
-		_memcons_output_end = . ;
-	} > DRAM
-	.sdram : {
-		/* We stick console output into a buffer here.  */
-		RAMK_KRAM_CONTENTS
-		ROOT_FS_CONTENTS
-	} > SDRAM
-}
diff --git a/arch/v850/kernel/simcons.c b/arch/v850/kernel/simcons.c
deleted file mode 100644
index 9973596ae30..00000000000
--- a/arch/v850/kernel/simcons.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/v850/kernel/simcons.c -- Console I/O for GDB v850e simulator
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-#include <asm/poll.h>
-#include <asm/string.h>
-#include <asm/simsyscall.h>
-
-
-/*  Low-level console. */
-
-static void simcons_write (struct console *co, const char *buf, unsigned len)
-{
-	V850_SIM_SYSCALL (write, 1, buf, len);
-}
-
-static int simcons_read (struct console *co, char *buf, unsigned len)
-{
-	return V850_SIM_SYSCALL (read, 0, buf, len);
-}
-
-static struct tty_driver *tty_driver;
-static struct tty_driver *simcons_device (struct console *c, int *index)
-{
-	*index = c->index;
-	return tty_driver;
-}
-
-static struct console simcons =
-{
-    .name	= "simcons",
-    .write	= simcons_write,
-    .read	= simcons_read,
-    .device	= simcons_device,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-/* Higher level TTY interface.  */
-
-int simcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-int simcons_tty_write (struct tty_struct *tty,
-		       const unsigned char *buf, int count)
-{
-	return V850_SIM_SYSCALL (write, 1, buf, count);
-}
-
-int simcons_tty_write_room (struct tty_struct *tty)
-{
-	/* Completely arbitrary.  */
-	return 0x100000;
-}
-
-int simcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-	/* We have no buffer.  */
-	return 0;
-}
-
-static const struct tty_operations ops = {
-	.open = simcons_tty_open,
-	.write = simcons_tty_write,
-	.write_room = simcons_tty_write_room,
-	.chars_in_buffer = simcons_tty_chars_in_buffer,
-};
-
-int __init simcons_tty_init (void)
-{
-	struct tty_driver *driver = alloc_tty_driver(1);
-	int err;
-	if (!driver)
-		return -ENOMEM;
-	driver->name = "simcons";
-	driver->major = TTY_MAJOR;
-	driver->minor_start = 64;
-	driver->type = TTY_DRIVER_TYPE_SYSCONS;
-	driver->init_termios = tty_std_termios;
-	tty_set_operations(driver, &ops);
-	err = tty_register_driver(driver);
-	if (err) {
-		put_tty_driver(driver);
-		return err;
-	}
-	tty_driver = driver;
-	return 0;
-}
-/* We use `late_initcall' instead of just `__initcall' as a workaround for
-   the fact that (1) simcons_tty_init can't be called before tty_init,
-   (2) tty_init is called via `module_init', (3) if statically linked,
-   module_init == device_init, and (4) there's no ordering of init lists.
-   We can do this easily because simcons is always statically linked, but
-   other tty drivers that depend on tty_init and which must use
-   `module_init' to declare their init routines are likely to be broken.  */
-late_initcall(simcons_tty_init);
-
-/* Poll for input on the console, and if there's any, deliver it to the
-   tty driver.  */
-void simcons_poll_tty (struct tty_struct *tty)
-{
-	char buf[32];	/* Not the nicest way to do it but I need it correct first */
-	int flip = 0, send_break = 0;
-	struct pollfd pfd;
-	pfd.fd = 0;
-	pfd.events = POLLIN;
-
-	if (V850_SIM_SYSCALL (poll, &pfd, 1, 0) > 0) {
-		if (pfd.revents & POLLIN) {
-			/* Real block hardware knows the transfer size before
-			   transfer so the new tty buffering doesn't try to handle
-			   this rather weird simulator specific case well */
-			int rd = V850_SIM_SYSCALL (read, 0, buf, 32);
-			if (rd > 0) {
-				tty_insert_flip_string(tty, buf, rd);
-				flip = 1;
-			} else
-				send_break = 1;
-		} else if (pfd.revents & POLLERR)
-			send_break = 1;
-	}
-
-	if (send_break) {
-		tty_insert_flip_char (tty, 0, TTY_BREAK);		
-		flip = 1;
-	}
-
-	if (flip)
-		tty_schedule_flip (tty);
-}
-
-void simcons_poll_ttys (void)
-{
-	if (tty_driver && tty_driver->ttys[0])
-		simcons_poll_tty (tty_driver->ttys[0]);
-}
-
-void simcons_setup (void)
-{
-	V850_SIM_SYSCALL (make_raw, 0);
-	register_console (&simcons);
-	printk (KERN_INFO "Console: GDB V850E simulator stdio\n");
-}
diff --git a/arch/v850/kernel/syscalls.c b/arch/v850/kernel/syscalls.c
deleted file mode 100644
index 1a83daf8e24..00000000000
--- a/arch/v850/kernel/syscalls.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * arch/v850/kernel/syscalls.c -- Various system-call definitions not
- * 	defined in machine-independent code
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was derived the ppc version, arch/ppc/kernel/syscalls.c
- * ... which was derived from "arch/i386/kernel/sys_i386.c" by Gary Thomas;
- *     modified by Cort Dougan (cort@cs.nmt.edu)
- *     and Paul Mackerras (paulus@cs.anu.edu.au).
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/syscalls.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/mman.h>
-#include <linux/sys.h>
-#include <linux/ipc.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int
-sys_ipc (uint call, int first, int second, int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -EINVAL;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semop (first, (struct sembuf *)ptr, second);
-		break;
-	case SEMGET:
-		ret = sys_semget (first, second, third);
-		break;
-	case SEMCTL:
-	{
-		union semun fourth;
-
-		if (!ptr)
-			break;
-		if ((ret = access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-		    || (ret = get_user(fourth.__pad, (void **)ptr)))
-			break;
-		ret = sys_semctl (first, second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd (first, (struct msgbuf *) ptr, second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			if (!ptr)
-				break;
-			if ((ret = access_ok(VERIFY_READ, ptr, sizeof(tmp)) ? 0 : -EFAULT)
-			    || (ret = copy_from_user(&tmp,
-						(struct ipc_kludge *) ptr,
-						sizeof (tmp))))
-				break;
-			ret = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp,
-					  third);
-			break;
-			}
-		default:
-			ret = sys_msgrcv (first, (struct msgbuf *) ptr,
-					  second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget ((key_t) first, second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl (first, second, (struct msqid_ds *) ptr);
-		break;
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-
-			if ((ret = access_ok(VERIFY_WRITE, (ulong*) third,
-					       sizeof(ulong)) ? 0 : -EFAULT))
-				break;
-			ret = do_shmat (first, (char *) ptr, second, &raddr);
-			if (ret)
-				break;
-			ret = put_user (raddr, (ulong *) third);
-			break;
-			}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				break;
-			ret = do_shmat (first, (char *) ptr, second,
-					 (ulong *) third);
-			break;
-		}
-		break;
-	case SHMDT: 
-		ret = sys_shmdt ((char *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget (first, second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl (first, second, (struct shmid_ds *) ptr);
-		break;
-	}
-
-	return ret;
-}
-
-static inline unsigned long
-do_mmap2 (unsigned long addr, size_t len,
-	 unsigned long prot, unsigned long flags,
-	 unsigned long fd, unsigned long pgoff)
-{
-	struct file * file = NULL;
-	int ret = -EBADF;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (! (flags & MAP_ANONYMOUS)) {
-		if (!(file = fget (fd)))
-			goto out;
-	}
-	
-	down_write (&current->mm->mmap_sem);
-	ret = do_mmap_pgoff (file, addr, len, prot, flags, pgoff);
-	up_write (&current->mm->mmap_sem);
-	if (file)
-		fput (file);
-out:
-	return ret;
-}
-
-unsigned long sys_mmap2 (unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff)
-{
-	return do_mmap2 (addr, len, prot, flags, fd, pgoff);
-}
-
-unsigned long sys_mmap (unsigned long addr, size_t len,
-		       unsigned long prot, unsigned long flags,
-		       unsigned long fd, off_t offset)
-{
-	int err = -EINVAL;
-
-	if (offset & ~PAGE_MASK)
-		goto out;
-
-	err = do_mmap2 (addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
-out:
-	return err;
-}
-
-/*
- * Do a system call from kernel instead of calling sys_execve so we
- * end up with proper pt_regs.
- */
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
-{
-	register char *__a __asm__ ("r6") = filename;
-	register void *__b __asm__ ("r7") = argv;
-	register void *__c __asm__ ("r8") = envp;
-	register unsigned long __syscall __asm__ ("r12") = __NR_execve;
-	register unsigned long __ret __asm__ ("r10");
-	__asm__ __volatile__ ("trap 0"
-			: "=r" (__ret), "=r" (__syscall)
-			: "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)
-			: "r1", "r5", "r11", "r13", "r14",
-			  "r15", "r16", "r17", "r18", "r19");
-	return __ret;
-}
diff --git a/arch/v850/kernel/teg.c b/arch/v850/kernel/teg.c
deleted file mode 100644
index 699248f92aa..00000000000
--- a/arch/v850/kernel/teg.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/v850/kernel/teg.c -- NB85E-TEG cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Select timer interrupt instead of external pin.  */
-	TEG_ISS |= 0x1;
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0,		NUM_CPU_IRQS,	1, 7 },
-	{ "CMD", IRQ_INTCMD(0),	IRQ_INTCMD_NUM,	1, 5 },
-	{ "SER", IRQ_INTSER(0),	IRQ_INTSER_NUM,	1, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM,	1, 4 },
-	{ "ST",	 IRQ_INTST(0),	IRQ_INTST_NUM,	1, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init teg_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void teg_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Enable UART I/O pins instead of external interrupt pins, and
-	   UART interrupts instead of external pin interrupts.  */
-	TEG_ISS |= 0x4E;
-}
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
deleted file mode 100644
index d810c93fe66..00000000000
--- a/arch/v850/kernel/time.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/arch/v850/kernel/time.c -- Arch-dependent timer functions
- *
- *  Copyright (C) 1991, 1992, 1995, 2001, 2002  Linus Torvalds
- *
- * This file contains the v850-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-
-#include "mach.h"
-
-#define TICK_SIZE	(tick_nsec / 1000)
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs)
-{
-#if 0
-	/* last time the cmos clock got updated */
-	static long last_rtc_update=0;
-#endif
-
-	/* may need to kick the hardware timer */
-	if (mach_tick)
-	  mach_tick ();
-
-	do_timer (1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	profile_tick(CPU_PROFILING, regs);
-#if 0
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss (xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-#ifdef CONFIG_HEARTBEAT
-	/* use power LED as a heartbeat instead -- much more useful
-	   for debugging -- based on the version for PReP by Cort */
-	/* acts like an actual heart beat -- ie thump-thump-pause... */
-	if (mach_heartbeat) {
-	    static unsigned cnt = 0, period = 0, dist = 0;
-
-	    if (cnt == 0 || cnt == dist)
-		mach_heartbeat ( 1 );
-	    else if (cnt == 7 || cnt == dist+7)
-		mach_heartbeat ( 0 );
-
-	    if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	    }
-	}
-#endif /* CONFIG_HEARTBEAT */
-#endif /* 0 */
-
-	return IRQ_HANDLED;
-}
-
-static int timer_dev_id;
-static struct irqaction timer_irqaction = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "timer",
-	.dev_id = &timer_dev_id,
-};
-
-void time_init (void)
-{
-	mach_gettimeofday (&xtime);
-	mach_sched_init (&timer_irqaction);
-}
diff --git a/arch/v850/kernel/v850_ksyms.c b/arch/v850/kernel/v850_ksyms.c
deleted file mode 100644
index 8d386a5dbc4..00000000000
--- a/arch/v850/kernel/v850_ksyms.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-
-
-extern void *trap_table;
-EXPORT_SYMBOL (trap_table);
-
-/* platform dependent support */
-EXPORT_SYMBOL (kernel_thread);
-EXPORT_SYMBOL (__bug);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL (csum_partial_copy_nocheck);
-EXPORT_SYMBOL (csum_partial_copy_from_user);
-EXPORT_SYMBOL (ip_compute_csum);
-EXPORT_SYMBOL (ip_fast_csum);
-
-/* string / mem functions */
-EXPORT_SYMBOL (memset);
-EXPORT_SYMBOL (memcpy);
-EXPORT_SYMBOL (memmove);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3 (void);
-extern void __ashrdi3 (void);
-extern void __lshrdi3 (void);
-extern void __muldi3 (void);
-extern void __negdi2 (void);
-
-EXPORT_SYMBOL (__ashldi3);
-EXPORT_SYMBOL (__ashrdi3);
-EXPORT_SYMBOL (__lshrdi3);
-EXPORT_SYMBOL (__muldi3);
-EXPORT_SYMBOL (__negdi2);
diff --git a/arch/v850/kernel/v850e2_cache.c b/arch/v850/kernel/v850e2_cache.c
deleted file mode 100644
index 4570312c689..00000000000
--- a/arch/v850/kernel/v850e2_cache.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * arch/v850/kernel/v850e2_cache.c -- Cache control for V850E2 cache
- * 	memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-
-#include <asm/v850e2_cache.h>
-
-/* Cache operations we can do.  The encoding corresponds directly to the
-   value we need to write into the COPR register.  */
-enum cache_op {
-	OP_SYNC_IF_DIRTY 	   = V850E2_CACHE_COPR_CFC(0), /* 000 */
-	OP_SYNC_IF_VALID 	   = V850E2_CACHE_COPR_CFC(1), /* 001 */
-	OP_SYNC_IF_VALID_AND_CLEAR = V850E2_CACHE_COPR_CFC(3), /* 011 */
-	OP_WAY_CLEAR 		   = V850E2_CACHE_COPR_CFC(4), /* 100 */
-	OP_FILL 		   = V850E2_CACHE_COPR_CFC(5), /* 101 */
-	OP_CLEAR 		   = V850E2_CACHE_COPR_CFC(6), /* 110 */
-	OP_CREATE_DIRTY 	   = V850E2_CACHE_COPR_CFC(7)  /* 111 */
-};
-
-/* Which cache to use.  This encoding also corresponds directly to the
-   value we need to write into the COPR register. */
-enum cache {
-	ICACHE = 0,
-	DCACHE = V850E2_CACHE_COPR_LBSL
-};
-
-/* Returns ADDR rounded down to the beginning of its cache-line.  */
-#define CACHE_LINE_ADDR(addr)  \
-   ((addr) & ~(V850E2_CACHE_LINE_SIZE - 1))
-/* Returns END_ADDR rounded up to the `limit' of its cache-line.  */
-#define CACHE_LINE_END_ADDR(end_addr)  \
-   CACHE_LINE_ADDR(end_addr + (V850E2_CACHE_LINE_SIZE - 1))
-
-
-/* Low-level cache ops.  */
-
-/* Apply cache-op OP to all entries in CACHE.  */
-static inline void cache_op_all (enum cache_op op, enum cache cache)
-{
-	int cmd = op | cache | V850E2_CACHE_COPR_WSLE | V850E2_CACHE_COPR_STRT;
-
-	if (op != OP_WAY_CLEAR) {
-		/* The WAY_CLEAR operation does the whole way, but other
-		   ops take begin-index and count params; we just indicate
-		   the entire cache.  */
-		V850E2_CACHE_CADL = 0;
-		V850E2_CACHE_CADH = 0;
-		V850E2_CACHE_CCNT = V850E2_CACHE_WAY_SIZE - 1;
-	}
-
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(0); /* way 0 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(1); /* way 1 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(2); /* way 2 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(3); /* way 3 */
-}
-
-/* Apply cache-op OP to all entries in CACHE covering addresses ADDR
-   through ADDR+LEN.  */
-static inline void cache_op_range (enum cache_op op, u32 addr, u32 len,
-				   enum cache cache)
-{
-	u32 start = CACHE_LINE_ADDR (addr);
-	u32 end = CACHE_LINE_END_ADDR (addr + len);
-	u32 num_lines = (end - start) >> V850E2_CACHE_LINE_SIZE_BITS;
-
-	V850E2_CACHE_CADL = start & 0xFFFF;
-	V850E2_CACHE_CADH = start >> 16;
-	V850E2_CACHE_CCNT = num_lines - 1;
-
-	V850E2_CACHE_COPR = op | cache | V850E2_CACHE_COPR_STRT;
-}
-
-
-/* High-level ops.  */
-
-static void cache_exec_after_store_all (void)
-{
-	cache_op_all (OP_SYNC_IF_DIRTY, DCACHE);
-	cache_op_all (OP_WAY_CLEAR, ICACHE);
-}
-
-static void cache_exec_after_store_range (u32 start, u32 len)
-{
-	cache_op_range (OP_SYNC_IF_DIRTY, start, len, DCACHE);
-	cache_op_range (OP_CLEAR, start, len, ICACHE);
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-	cache_exec_after_store_all ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-	cache_exec_after_store_range (start, end - start);
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-	cache_exec_after_store_range (page_to_virt (page), PAGE_SIZE);
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-			      unsigned long addr, int len)
-{
-	cache_exec_after_store_range (addr, len);
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-	/* For the exact size, see signal.c, but 16 bytes should be enough.  */
-	cache_exec_after_store_range (addr, 16);
-}
diff --git a/arch/v850/kernel/v850e_cache.c b/arch/v850/kernel/v850e_cache.c
deleted file mode 100644
index ea3e51cfb25..00000000000
--- a/arch/v850/kernel/v850e_cache.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * arch/v850/kernel/v850e_cache.c -- Cache control for V850E cache memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This file implements cache control for the rather simple cache used on
-   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
-   CPU.  V850E2 processors have their own (better) cache
-   implementation.  */
-
-#include <asm/entry.h>
-#include <asm/cacheflush.h>
-#include <asm/v850e_cache.h>
-
-#define WAIT_UNTIL_CLEAR(value) while (value) {}
-
-/* Set caching params via the BHC and DCC registers.  */
-void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc)
-{
-	unsigned long *r0_ram = (unsigned long *)R0_RAM_ADDR;
-	register u16 bhc_val asm ("r6") = bhc;
-
-	/* Read the instruction cache control register (ICC) and confirm
-	   that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-	V850E_CACHE_ICC = icc;
-
-#ifdef V850E_CACHE_DCC
-	/* Configure data-cache.  */
-	V850E_CACHE_DCC = dcc;
-#endif /* V850E_CACHE_DCC */
-
-	/* Configure caching for various memory regions by writing the BHC
-	   register.  The documentation says that an instruction _cannot_
-	   enable/disable caching for the memory region in which the
-	   instruction itself exists; to work around this, we store
-	   appropriate instructions into the on-chip RAM area (which is never
-	   cached), and briefly jump there to do the work.  */
-#ifdef V850E_CACHE_WRITE_IBS
-	*r0_ram++ 	= 0xf0720760;	/* st.h r0, 0xfffff072[r0] */
-#endif
-	*r0_ram++ 	= 0xf06a3760;	/* st.h r6, 0xfffff06a[r0] */
-	*r0_ram 	= 0x5640006b;	/* jmp [r11] */
-
-	asm ("mov hilo(1f), r11; jmp [%1]; 1:;"
-	     :: "r" (bhc_val), "r" (R0_RAM_ADDR) : "r11");
-}
-
-static void clear_icache (void)
-{
-	/* 1. Read the instruction cache control register (ICC) and confirm
-	      that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-	/* 2. Read the ICC register and confirm that bit 12 (LOCK0) is
-  	      cleared.  Bit 13 of the ICC register is always cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x1000);
-
-	/* 3. Set the TCLR0 and TCLR1 bits of the ICC register as follows,
-	      when clearing way 0 and way 1 at the same time:
-	        (a) Set the TCLR0 and TCLR1 bits.
-		(b) Read the TCLR0 and TCLR1 bits to confirm that these bits
-		    are cleared.
-		(c) Perform (a) and (b) above again.  */
-	V850E_CACHE_ICC |= 0x3;
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-#ifdef V850E_CACHE_REPEAT_ICC_WRITE
-	/* Do it again.  */
-	V850E_CACHE_ICC |= 0x3;
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-#endif
-}
-
-#ifdef V850E_CACHE_DCC
-/* Flush or clear (or both) the data cache, depending on the value of FLAGS;
-   the procedure is the same for both, just the control bits used differ (and
-   both may be performed simultaneously).  */
-static void dcache_op (unsigned short flags)
-{
-	/* 1. Read the data cache control register (DCC) and confirm that bits
-	      0, 1, 4, and 5 (DC00, DC01, DC04, DC05) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & 0x33);
-
-	/* 2. Clear DCC register bit 12 (DC12), bit 13 (DC13), or both
-	      depending on the way for which tags are to be cleared.  */
-	V850E_CACHE_DCC &= ~0xC000;
-
-	/* 3. Set DCC register bit 0 (DC00), bit 1 (DC01) or both depending on
-	      the way for which tags are to be cleared.
-	      ...
-	      Set DCC register bit 4 (DC04), bit 5 (DC05), or both depending
-	      on the way to be data flushed.  */
-	V850E_CACHE_DCC |= flags;
-
-	/* 4. Read DCC register bit DC00, DC01 [DC04, DC05], or both depending
-	      on the way for which tags were cleared [flushed] and confirm
-	      that that bit is cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & flags);
-}
-#endif /* V850E_CACHE_DCC */
-
-/* Flushes the contents of the dcache to memory.  */
-static inline void flush_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if in write-back mode.  */
-	if (V850E_CACHE_DCC & 0x0400)
-		dcache_op (0x30);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Flushes the contents of the dcache to memory, and then clears it.  */
-static inline void clear_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if the dcache is enabled.  */
-	if (V850E_CACHE_DCC & 0x0C00)
-		dcache_op (0x33);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Clears the dcache without flushing to memory first.  */
-static inline void clear_dcache_no_flush (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if the dcache is enabled.  */
-	if (V850E_CACHE_DCC & 0x0C00)
-		dcache_op (0x3);
-#endif /* V850E_CACHE_DCC */
-}
-
-static inline void cache_exec_after_store (void)
-{
-	flush_dcache ();
-	clear_icache ();
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-			      unsigned long adr, int len)
-{
-	cache_exec_after_store ();
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-	cache_exec_after_store ();
-}
diff --git a/arch/v850/kernel/v850e_intc.c b/arch/v850/kernel/v850e_intc.c
deleted file mode 100644
index 8d39a52ee6d..00000000000
--- a/arch/v850/kernel/v850e_intc.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/v850/kernel/v850e_intc.c -- V850E interrupt controller (INTC)
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/v850e_intc.h>
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned v850e_intc_irq_startup (unsigned irq)
-{
-	v850e_intc_clear_pending_irq (irq);
-	v850e_intc_enable_irq (irq);
-	return 0;
-}
-
-static void v850e_intc_end_irq (unsigned irq)
-{
-	unsigned long psw, temp;
-
-	/* Clear the highest-level bit in the In-service priority register
-	   (ISPR), to allow this interrupt (or another of the same or
-	   lesser priority) to happen again.
-
-	   The `reti' instruction normally does this automatically when the
-	   PSW bits EP and NP are zero, but we can't always rely on reti
-	   being used consistently to return after an interrupt (another
-	   process can be scheduled, for instance, which can delay the
-	   associated reti for a long time, or this process may be being
-	   single-stepped, which uses the `dbret' instruction to return
-	   from the kernel).
-
-	   We also set the PSW EP bit, which prevents reti from also
-	   trying to modify the ISPR itself.  */
-
-	/* Get PSW and disable interrupts.  */
-	asm volatile ("stsr psw, %0; di" : "=r" (psw));
-	/* We don't want to do anything for NMIs (they don't use the ISPR).  */
-	if (! (psw & 0xC0)) {
-		/* Transition to `trap' state, so that an eventual real
-		   reti instruction won't modify the ISPR.  */
-		psw |= 0x40;
-		/* Fake an interrupt return, which automatically clears the
-		   appropriate bit in the ISPR.  */
-		asm volatile ("mov hilo(1f), %0;"
-			      "ldsr %0, eipc; ldsr %1, eipsw;"
-			      "reti;"
-			      "1:"
-			      : "=&r" (temp) : "r" (psw));
-	}
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
-				       struct hw_interrupt_type *hw_irq_types)
-{
-	struct v850e_intc_irq_init *init;
-	for (init = inits; init->name; init++) {
-		unsigned i;
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = v850e_intc_irq_startup;
-		hwit->shutdown = v850e_intc_disable_irq;
-		hwit->enable   = v850e_intc_enable_irq;
-		hwit->disable  = v850e_intc_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = v850e_intc_end_irq;
-		
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-		/* Set the interrupt priorities.  */
-		for (i = 0; i < init->num; i++) {
-			unsigned irq = init->base + i * init->interval;
-
-			/* If the interrupt is currently enabled (all
-			   interrupts are initially disabled), then
-			   assume whoever enabled it has set things up
-			   properly, and avoid messing with it.  */
-			if (! v850e_intc_irq_enabled (irq))
-				/* This write also (1) disables the
-				   interrupt, and (2) clears any pending
-				   interrupts.  */
-				V850E_INTC_IC (irq)
-					= (V850E_INTC_IC_PR (init->priority)
-					   | V850E_INTC_IC_MK);
-		}
-	}
-}
diff --git a/arch/v850/kernel/v850e_timer_d.c b/arch/v850/kernel/v850e_timer_d.c
deleted file mode 100644
index d2a4ece2574..00000000000
--- a/arch/v850/kernel/v850e_timer_d.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_d.c -- `Timer D' component often used
- *	with V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-
-#include <asm/v850e_utils.h>
-#include <asm/v850e_timer_d.h>
-
-/* Start interval timer TIMER (0-3).  The timer will issue the
-   corresponding INTCMD interrupt RATE times per second.
-   This function does not enable the interrupt.  */
-void v850e_timer_d_configure (unsigned timer, unsigned rate)
-{
-	unsigned divlog2, count;
-
-	/* Calculate params for timer.  */
-	if (! calc_counter_params (
-		    V850E_TIMER_D_BASE_FREQ, rate,
-		    V850E_TIMER_D_TMCD_CS_MIN, V850E_TIMER_D_TMCD_CS_MAX, 16,
-		    &divlog2, &count))
-		printk (KERN_WARNING
-			"Cannot find interval timer %d setting suitable"
-			" for rate of %dHz.\n"
-			"Using rate of %dHz instead.\n",
-			timer, rate,
-			(V850E_TIMER_D_BASE_FREQ >> divlog2) >> 16);
-
-	/* Do the actual hardware timer initialization:  */
-
-	/* Enable timer.  */
-	V850E_TIMER_D_TMCD(timer) = V850E_TIMER_D_TMCD_CAE;
-	/* Set clock divider.  */
-	V850E_TIMER_D_TMCD(timer)
-		= V850E_TIMER_D_TMCD_CAE
-		| V850E_TIMER_D_TMCD_CS(divlog2);
-	/* Set timer compare register.  */
-	V850E_TIMER_D_CMD(timer) = count;
-	/* Start counting.  */
-	V850E_TIMER_D_TMCD(timer)
-		= V850E_TIMER_D_TMCD_CAE
-		| V850E_TIMER_D_TMCD_CS(divlog2)
-		| V850E_TIMER_D_TMCD_CE;
-}
diff --git a/arch/v850/kernel/v850e_utils.c b/arch/v850/kernel/v850e_utils.c
deleted file mode 100644
index e6807ef8dee..00000000000
--- a/arch/v850/kernel/v850e_utils.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/v850e_utils.h -- Utility functions associated with
- *	V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/v850e_utils.h>
-
-/* Calculate counter clock-divider and count values to attain the
-   desired frequency RATE from the base frequency BASE_FREQ.  The
-   counter is expected to have a clock-divider, which can divide the
-   system cpu clock by a power of two value from MIN_DIVLOG2 to
-   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
-   counts up and resets whenever it's equal to the compare register,
-   generating an interrupt or whatever when it does so).  The returned
-   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
-   -- the counter compare value to use.  Returns true if it was possible
-   to find a reasonable value, otherwise false (and the other return
-   values will be set to be as good as possible).  */
-int calc_counter_params (unsigned long base_freq,
-			 unsigned long rate,
-			 unsigned min_divlog2, unsigned max_divlog2,
-			 unsigned counter_size,
-			 unsigned *divlog2, unsigned *count)
-{
-	unsigned _divlog2;
-	int ok = 0;
-
-	/* Find the lowest clock divider setting that can represent RATE.  */
-	for (_divlog2 = min_divlog2; _divlog2 <= max_divlog2; _divlog2++) {
-		/* Minimum interrupt rate possible using this divider.  */
-		unsigned min_int_rate
-			= (base_freq >> _divlog2) >> counter_size;
-
-		if (min_int_rate <= rate) {
-			/* This setting is the highest resolution
-			   setting that's slow enough enough to attain
-			   RATE interrupts per second, so use it.  */
-			ok = 1;
-			break;
-		}
-	}
-
-	if (_divlog2 > max_divlog2)
-		/* Can't find correct setting.  */
-		_divlog2 = max_divlog2;
-
-	if (divlog2)
-		*divlog2 = _divlog2;
-	if (count)
-		*count = ((base_freq >> _divlog2) + rate/2) / rate;
-
-	return ok;
-}
diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S
deleted file mode 100644
index d08cd1d27f2..00000000000
--- a/arch/v850/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * arch/v850/vmlinux.lds.S -- kernel linker script for v850 platforms
- *
- *  Copyright (C) 2002,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-
-#define VMLINUX_SYMBOL(_sym_) _##_sym_
-#include <asm-generic/vmlinux.lds.h>
-
-/* For most platforms, this will define useful things like RAM addr/size.  */
-#include <asm/machdep.h>
-
-
-/* The following macros contain the usual definitions for various data areas.
-   The prefix `RAMK_' is used to indicate macros suitable for kernels loaded
-   into RAM, and similarly `ROMK_' for ROM-resident kernels.  Note that all
-   symbols are prefixed with an extra `_' for compatibility with the v850
-   toolchain.  */
-
-	
-/* Interrupt vectors.  */
-#define INTV_CONTENTS							      \
-		. = ALIGN (0x10) ;					      \
-		__intv_start = . ;					      \
-			*(.intv.reset)	/* Reset vector */		      \
-		. = __intv_start + 0x10 ;				      \
-			*(.intv.common)	/* Vectors common to all v850e proc */\
-		. = __intv_start + 0x80 ;				      \
-			*(.intv.mach)	/* Machine-specific int. vectors.  */ \
-		__intv_end = . ;
-
-#define RODATA_CONTENTS							      \
-		. = ALIGN (16) ;					      \
-			*(.rodata) *(.rodata.*)				      \
-			*(__vermagic)		/* Kernel version magic */    \
-			*(.rodata1)					      \
-		/* PCI quirks */					      \
-		___start_pci_fixups_early = . ;				      \
-			*(.pci_fixup_early)				      \
-		___end_pci_fixups_early = . ;				      \
-		___start_pci_fixups_header = . ;			      \
-			*(.pci_fixup_header)				      \
-		___end_pci_fixups_header = . ;				      \
-		___start_pci_fixups_final = . ;				      \
-			*(.pci_fixup_final)				      \
-		___end_pci_fixups_final = . ;				      \
-		___start_pci_fixups_enable = . ;			      \
-			*(.pci_fixup_enable)				      \
-		___end_pci_fixups_enable = . ;				      \
-		/* Kernel symbol table: Normal symbols */		      \
-		___start___ksymtab = .;					      \
-			*(__ksymtab)					      \
-		___stop___ksymtab = .;					      \
-		/* Kernel symbol table: GPL-only symbols */		      \
-		___start___ksymtab_gpl = .;				      \
-			*(__ksymtab_gpl)				      \
-		___stop___ksymtab_gpl = .;				      \
-		/* Kernel symbol table: GPL-future symbols */		      \
-		___start___ksymtab_gpl_future = .;			      \
-			*(__ksymtab_gpl_future)				      \
-		___stop___ksymtab_gpl_future = .;			      \
-		/* Kernel symbol table: strings */			      \
-			*(__ksymtab_strings)				      \
-		/* Kernel symbol table: Normal symbols */		      \
-		___start___kcrctab = .;					      \
-			*(__kcrctab)					      \
-		___stop___kcrctab = .;					      \
-		/* Kernel symbol table: GPL-only symbols */		      \
-		___start___kcrctab_gpl = .;				      \
-			*(__kcrctab_gpl)				      \
-		___stop___kcrctab_gpl = .;				      \
-		/* Kernel symbol table: GPL-future symbols */		      \
-		___start___kcrctab_gpl_future = .;			      \
-			*(__kcrctab_gpl_future)				      \
-		___stop___kcrctab_gpl_future = .;			      \
-		/* Built-in module parameters */			      \
-		. = ALIGN (4) ;						      \
-		___start___param = .;					      \
-		*(__param)						      \
-		___stop___param = .;
-
-
-/* Kernel text segment, and some constant data areas.  */
-#define TEXT_CONTENTS							      \
-		_text = .;						      \
-		__stext = . ;						      \
-		TEXT_TEXT						      \
-		SCHED_TEXT						      \
-			*(.exit.text)	/* 2.5 convention */		      \
-			*(.text.exit)	/* 2.4 convention */		      \
-			*(.text.lock)					      \
-			*(.exitcall.exit)				      \
-		__real_etext = . ;	/* There may be data after here.  */  \
-		RODATA_CONTENTS						      \
-		. = ALIGN (4) ;						      \
-		    	*(.call_table_data)				      \
-			*(.call_table_text)				      \
-		. = ALIGN (16) ;	/* Exception table.  */		      \
-		___start___ex_table = . ;				      \
-			*(__ex_table)					      \
-		___stop___ex_table = . ;				      \
-		. = ALIGN (4) ;						      \
-		__etext = . ;
-
-/* Kernel data segment.  */
-#define DATA_CONTENTS							      \
-		__sdata = . ;						      \
-		DATA_DATA						      \
-			EXIT_DATA	/* 2.5 convention */		      \
-			*(.data.exit)	/* 2.4 convention */		      \
-		. = ALIGN (16) ;					      \
-		*(.data.cacheline_aligned)				      \
-		. = ALIGN (0x2000) ;					      \
-        	*(.data.init_task)					      \
-		. = ALIGN (0x2000) ;					      \
-		__edata = . ;
-
-/* Kernel BSS segment.  */
-#define BSS_CONTENTS							      \
-		__sbss = . ;						      \
-			*(.bss)						      \
-			*(COMMON)					      \
-		. = ALIGN (4) ;						      \
-		__init_stack_end = . ;					      \
-		__ebss = . ;
-
-/* `initcall' tables.  */
-#define INITCALL_CONTENTS						      \
-		. = ALIGN (16) ;					      \
-		___setup_start = . ;					      \
-			*(.init.setup)	/* 2.5 convention */		      \
-			*(.setup.init)	/* 2.4 convention */		      \
-		___setup_end = . ;					      \
-		___initcall_start = . ;					      \
-			*(.initcall.init)				      \
-			INITCALLS					      \
-		. = ALIGN (4) ;						      \
-		___initcall_end = . ;					      \
-		___con_initcall_start = .;				      \
-			*(.con_initcall.init)				      \
-		___con_initcall_end = .;
-
-/* Contents of `init' section for a kernel that's loaded into RAM.  */
-#define RAMK_INIT_CONTENTS						      \
-		RAMK_INIT_CONTENTS_NO_END				      \
-		__init_end = . ;
-/* Same as RAMK_INIT_CONTENTS, but doesn't define the `__init_end' symbol.  */
-#define RAMK_INIT_CONTENTS_NO_END					      \
-		. = ALIGN (4096) ;					      \
-		__init_start = . ;					      \
-			__sinittext = .;				      \
-			INIT_TEXT	/* 2.5 convention */		      \
-			__einittext = .;				      \
-			INIT_DATA					      \
-			*(.text.init)	/* 2.4 convention */		      \
-			*(.data.init)					      \
-		INITCALL_CONTENTS					      \
-		INITRAMFS_CONTENTS
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into RAM.  */	
-#define ROMK_INIT_RAM_CONTENTS						      \
-		. = ALIGN (4096) ;					      \
-		__init_start = . ;					      \
-			INIT_DATA	/* 2.5 convention */		      \
-			*(.data.init)	/* 2.4 convention */		      \
-		__init_end = . ;					      \
-		. = ALIGN (4096) ;
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into ROM.  */	
-#define ROMK_INIT_ROM_CONTENTS						      \
-			_sinittext = .;					      \
-			INIT_TEXT	/* 2.5 convention */		      \
-			_einittext = .;					      \
-			*(.text.init)	/* 2.4 convention */		      \
-		INITCALL_CONTENTS					      \
-		INITRAMFS_CONTENTS
-
-/* A root filesystem image, for kernels with an embedded root filesystem.  */
-#define ROOT_FS_CONTENTS						      \
-		__root_fs_image_start = . ;				      \
-		*(.root)						      \
-		__root_fs_image_end = . ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-/* The initramfs archive.  */
-#define INITRAMFS_CONTENTS						      \
-		. = ALIGN (4) ;						      \
-		___initramfs_start = . ;				      \
-			*(.init.ramfs)					      \
-		___initramfs_end = . ;
-#endif
-
-/* Where the initial bootmap (bitmap for the boot-time memory allocator) 
-   should be place.  */
-#define BOOTMAP_CONTENTS						      \
-		. = ALIGN (4096) ;					      \
-		__bootmap = . ;						      \
-		. = . + 4096 ;		/* enough for 128MB.   */
-
-/* The contents of a `typical' kram area for a kernel in RAM.  */
-#define RAMK_KRAM_CONTENTS						      \
-		__kram_start = . ;					      \
-		TEXT_CONTENTS						      \
-		DATA_CONTENTS						      \
-		BSS_CONTENTS						      \
-		RAMK_INIT_CONTENTS					      \
-		__kram_end = . ;					      \
-		BOOTMAP_CONTENTS
-
-
-/* Define output sections normally used for a ROM-resident kernel.  
-   ROM and RAM should be appropriate memory areas to use for kernel
-   ROM and RAM data.  This assumes that ROM starts at 0 (and thus can
-   hold the interrupt vectors).  */
-#define ROMK_SECTIONS(ROM, RAM)						      \
-	.rom : {							      \
-		INTV_CONTENTS						      \
-		TEXT_CONTENTS						      \
-		ROMK_INIT_ROM_CONTENTS					      \
-		ROOT_FS_CONTENTS					      \
-	} > ROM								      \
-									      \
-	__rom_copy_src_start = . ;					      \
-									      \
-	.data : {							      \
-		__kram_start = . ;					      \
-		__rom_copy_dst_start = . ;				      \
-		DATA_CONTENTS						      \
-		ROMK_INIT_RAM_CONTENTS					      \
-		__rom_copy_dst_end = . ;				      \
-	} > RAM  AT> ROM						      \
-									      \
-	.bss ALIGN (4) : {						      \
-		BSS_CONTENTS						      \
-		__kram_end = . ;					      \
-		BOOTMAP_CONTENTS					      \
-	} > RAM
-
-
-/* The 32-bit variable `jiffies' is just the lower 32-bits of `jiffies_64'.  */
-_jiffies = _jiffies_64 ;
-
-
-/* Include an appropriate platform-dependent linker-script (which
-   usually should use the above macros to do most of the work).  */
-
-#ifdef CONFIG_V850E_SIM
-# include "sim.ld"
-#endif
-
-#ifdef CONFIG_V850E2_SIM85E2
-# include "sim85e2.ld"
-#endif
-
-#ifdef CONFIG_V850E2_FPGA85E2C
-# include "fpga85e2c.ld"
-#endif
-
-#ifdef CONFIG_V850E2_ANNA
-# ifdef CONFIG_ROM_KERNEL
-#  include "anna-rom.ld"
-# else
-#  include "anna.ld"
-# endif
-#endif
-
-#ifdef CONFIG_V850E_AS85EP1
-# ifdef CONFIG_ROM_KERNEL
-#  include "as85ep1-rom.ld"
-# else
-#  include "as85ep1.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_MA1
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_ma1_cb-rom.ld"
-# else
-#  include "rte_ma1_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_NB85E
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_nb85e_cb-rom.ld"
-# elif defined(CONFIG_RTE_CB_MULTI)
-#  include "rte_nb85e_cb-multi.ld"
-# else
-#  include "rte_nb85e_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_ME2
-#  include "rte_me2_cb.ld"
-#endif
-
diff --git a/arch/v850/lib/Makefile b/arch/v850/lib/Makefile
deleted file mode 100644
index 1c78b728a11..00000000000
--- a/arch/v850/lib/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# arch/v850/lib/Makefile
-#
-
-lib-y  = ashrdi3.o ashldi3.o lshrdi3.o muldi3.o negdi2.o \
-	 checksum.o memcpy.o memset.o
diff --git a/arch/v850/lib/ashldi3.c b/arch/v850/lib/ashldi3.c
deleted file mode 100644
index 9e792d53f0e..00000000000
--- a/arch/v850/lib/ashldi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* ashldi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashldi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.low = 0;
-      w.s.high = (USItype)uu.s.low << -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.low >> bm;
-      w.s.low = (USItype)uu.s.low << b;
-      w.s.high = ((USItype)uu.s.high << b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/ashrdi3.c b/arch/v850/lib/ashrdi3.c
deleted file mode 100644
index 78efb65e315..00000000000
--- a/arch/v850/lib/ashrdi3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      /* w.s.high = 1..1 or 0..0 */
-      w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-      w.s.low = uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/checksum.c b/arch/v850/lib/checksum.c
deleted file mode 100644
index 042158dfe17..00000000000
--- a/arch/v850/lib/checksum.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		MIPS specific IP/TCP/UDP checksumming routines
- *
- * Authors:	Ralf Baechle, <ralf@waldorf-gmbh.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.1 2002/09/28 14:58:40 gerg Exp $
- */
-#include <net/checksum.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-static inline unsigned short from32to16 (unsigned long sum)
-{
-	unsigned int result;
-	/*
-			        %0		%1
-	      hsw %1, %0	H     L		L     H
-	      add %1, %0	H     L		H+L+C H+L
-	*/
-	asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
-	return result >> 16;
-}
-
-static inline unsigned int do_csum(const unsigned char * buff, int len)
-{
-	int odd, count;
-	unsigned int result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = be16_to_cpu(*buff);
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			unsigned int carry = 0;
-			do {
-				unsigned int w = *(unsigned int *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += le16_to_cpu(*buff);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += (__force u32)sum;
-	if ((__force u32)sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * copy while checksumming, otherwise like csum_partial
- */
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-                               int len, __wsum sum)
-{
-	/*
-	 * It's 2:30 am and I don't feel like doing it real ...
-	 * This is lots slower than the real thing (tm)
-	 */
-	sum = csum_partial(src, len, sum);
-	memcpy(dst, src, len);
-
-	return sum;
-}
-
-/*
- * Copy from userspace and compute checksum.  If we catch an exception
- * then zero the rest of the buffer.
- */
-__wsum csum_partial_copy_from_user (const void *src,
-					  void *dst,
-                                          int len, __wsum sum,
-                                          int *err_ptr)
-{
-	int missing;
-
-	missing = copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*err_ptr = -EFAULT;
-	}
-		
-	return csum_partial(dst, len, sum);
-}
diff --git a/arch/v850/lib/lshrdi3.c b/arch/v850/lib/lshrdi3.c
deleted file mode 100644
index 93b1cb6fdee..00000000000
--- a/arch/v850/lib/lshrdi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__lshrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.high = 0;
-      w.s.low = (USItype)uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = (USItype)uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/memcpy.c b/arch/v850/lib/memcpy.c
deleted file mode 100644
index 492847b3e61..00000000000
--- a/arch/v850/lib/memcpy.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/v850/lib/memcpy.c -- Memory copying
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <asm/string.h>
-
-#define CHUNK_SIZE		32 /* bytes */
-#define CHUNK_ALIGNED(addr)	(((unsigned long)addr & 0x3) == 0)
-
-/* Note that this macro uses 8 call-clobbered registers (not including
-   R1), which are few enough so that the following functions don't need
-   to spill anything to memory.  It also uses R1, which is nominally
-   reserved for the assembler, but here it should be OK.  */
-#define COPY_CHUNK(src, dst)			\
-   asm ("mov %0, ep;"				\
-	"sld.w 0[ep], r1; sld.w 4[ep], r12;"	\
-	"sld.w 8[ep], r13; sld.w 12[ep], r14;"	\
-	"sld.w 16[ep], r15; sld.w 20[ep], r17;"	\
-	"sld.w 24[ep], r18; sld.w 28[ep], r19;"	\
-	"mov %1, ep;"				\
-	"sst.w r1, 0[ep]; sst.w r12, 4[ep];"	\
-	"sst.w r13, 8[ep]; sst.w r14, 12[ep];"	\
-	"sst.w r15, 16[ep]; sst.w r17, 20[ep];"	\
-	"sst.w r18, 24[ep]; sst.w r19, 28[ep]"	\
-	:: "r" (src), "r" (dst)			\
-	: "r1", "r12", "r13", "r14", "r15",	\
-	  "r17", "r18", "r19", "ep", "memory");
-
-void *memcpy (void *dst, const void *src, __kernel_size_t size)
-{
-	char *_dst = dst;
-	const char *_src = src;
-
-	if (size >= CHUNK_SIZE && CHUNK_ALIGNED(_src) && CHUNK_ALIGNED(_dst)) {
-		/* Copy large blocks efficiently.  */
-		unsigned count;
-		for (count = size / CHUNK_SIZE; count; count--) {
-			COPY_CHUNK (_src, _dst);
-			_src += CHUNK_SIZE;
-			_dst += CHUNK_SIZE;
-		}
-		size %= CHUNK_SIZE;
-	}
-
-	if (size > 0)
-		do
-			*_dst++ = *_src++;
-		while (--size);
-
-	return dst;
-}
-
-void *memmove (void *dst, const void *src, __kernel_size_t size)
-{
-	if ((unsigned long)dst < (unsigned long)src
-	    || (unsigned long)src + size < (unsigned long)dst)
-		return memcpy (dst, src, size);
-	else {
-		char *_dst = dst + size;
-		const char *_src = src + size;
-
-		if (size >= CHUNK_SIZE
-		    && CHUNK_ALIGNED (_src) && CHUNK_ALIGNED (_dst))
-		{
-			/* Copy large blocks efficiently.  */
-			unsigned count;
-			for (count = size / CHUNK_SIZE; count; count--) {
-				_src -= CHUNK_SIZE;
-				_dst -= CHUNK_SIZE;
-				COPY_CHUNK (_src, _dst);
-			}
-			size %= CHUNK_SIZE;
-		}
-
-		if (size > 0)
-			do
-				*--_dst = *--_src;
-			while (--size);
-
-		return _dst;
-	}
-}
diff --git a/arch/v850/lib/memset.c b/arch/v850/lib/memset.c
deleted file mode 100644
index d1b2ad821b1..00000000000
--- a/arch/v850/lib/memset.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/v850/lib/memset.c -- Memory initialization
- *
- *  Copyright (C) 2001,02,04  NEC Corporation
- *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-
-void *memset (void *dst, int val, __kernel_size_t count)
-{
-	if (count) {
-		register unsigned loop;
-		register void *ptr asm ("ep") = dst;
-
-		/* replicate VAL into a long.  */
-		val &= 0xff;
-		val |= val << 8;
-		val |= val << 16;
-
-		/* copy initial unaligned bytes.  */
-		if ((long)ptr & 1) {
-			*(char *)ptr = val;
-			ptr = (void *)((char *)ptr + 1);
-			count--;
-		}
-		if (count > 2 && ((long)ptr & 2)) {
-			*(short *)ptr = val;
-			ptr = (void *)((short *)ptr + 1);
-			count -= 2;
-		}
-
-		/* 32-byte copying loop.  */
-		for (loop = count / 32; loop; loop--) {
-			asm ("sst.w %0, 0[ep]; sst.w %0, 4[ep];"
-			     "sst.w %0, 8[ep]; sst.w %0, 12[ep];"
-			     "sst.w %0, 16[ep]; sst.w %0, 20[ep];"
-			     "sst.w %0, 24[ep]; sst.w %0, 28[ep]"
-			     :: "r" (val) : "memory");
-			ptr += 32;
-		}
-		count %= 32;
-
-		/* long copying loop.  */
-		for (loop = count / 4; loop; loop--) {
-			*(long *)ptr = val;
-			ptr = (void *)((long *)ptr + 1);
-		}
-		count %= 4;
-
-		/* finish up with any trailing bytes.  */
-		if (count & 2) {
-			*(short *)ptr = val;
-			ptr = (void *)((short *)ptr + 1);
-		}
-		if (count & 1) {
-			*(char *)ptr = val;
-		}
-	}
-
-	return dst;
-}
diff --git a/arch/v850/lib/muldi3.c b/arch/v850/lib/muldi3.c
deleted file mode 100644
index 277ca25c82c..00000000000
--- a/arch/v850/lib/muldi3.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and 
-			   gcc-2.7.2.3/longlong.h which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 2001 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define umul_ppmm(w1, w0, u, v) \
-  __asm__ ("mulu %3, %0, %1"						\
-           : "=r" ((USItype)(w0)),					\
-             "=r" ((USItype)(w1))					\
-           : "%0" ((USItype)(u)),					\
-             "r" ((USItype)(v)))
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;							\
-    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-    __w.ll; })
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__muldi3 (DItype u, DItype v)
-{
-  DIunion w;
-  DIunion uu, vv;
-
-  uu.ll = u,
-  vv.ll = v;
-
-  w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-  w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-	       + (USItype) uu.s.high * (USItype) vv.s.low);
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/negdi2.c b/arch/v850/lib/negdi2.c
deleted file mode 100644
index 571e04fc619..00000000000
--- a/arch/v850/lib/negdi2.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/v850/lib/negdi2.c -- 64-bit negation
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-typedef		 int DItype	__attribute__ ((mode (DI)));
-
-DItype __negdi2 (DItype x)
-{
-	__asm__ __volatile__
-		("not	r6, r10;"
-		 "add	1, r10;"
-		 "setf	c, r6;"
-		 "not	r7, r11;"
-		 "add	r6, r11"
-		 ::: "r6", "r7", "r10", "r11");
-}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 96e0c2ebc38..ed92864d132 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,12 +21,16 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_KRETPROBES
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_GENERIC_DMA_COHERENT if X86_32
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
 config ARCH_DEFCONFIG
 	string
@@ -329,20 +333,6 @@ config X86_BIGSMP
 
 endif
 
-config X86_RDC321X
-	bool "RDC R-321x SoC"
-	depends on X86_32
-	select M486
-	select X86_REBOOTFIXUPS
-	select GENERIC_GPIO
-	select LEDS_CLASS
-	select LEDS_GPIO
-	select NEW_LEDS
-	help
-	  This option is needed for RDC R-321x system-on-chip, also known
-	  as R-8610-(G).
-	  If you don't have one of these chips, you should say N here.
-
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
 	select PARAVIRT
@@ -366,6 +356,16 @@ config X86_VISWS
 	  A kernel compiled for the Visual Workstation will run on general
 	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
 
+config X86_RDC321X
+	bool "RDC R-321x SoC"
+	depends on X86_32
+	select M486
+	select X86_REBOOTFIXUPS
+	help
+	  This option is needed for RDC R-321x system-on-chip, also known
+	  as R-8610-(G).
+	  If you don't have one of these chips, you should say N here.
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
@@ -447,7 +447,6 @@ config PARAVIRT_DEBUG
 
 config MEMTEST
 	bool "Memtest"
-	depends on X86_64
 	help
 	  This option adds a kernel parameter 'memtest', which allows memtest
 	  to be set.
@@ -578,35 +577,29 @@ config SWIOTLB
 
 config IOMMU_HELPER
 	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+
 config MAXSMP
 	bool "Configure Maximum number of SMP Processors and NUMA Nodes"
-	depends on X86_64 && SMP
+	depends on X86_64 && SMP && BROKEN
 	default n
 	help
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
 
-if MAXSMP
 config NR_CPUS
-	int
-	default "4096"
-endif
-
-if !MAXSMP
-config NR_CPUS
-	int "Maximum number of CPUs (2-4096)"
-	range 2 4096
+	int "Maximum number of CPUs (2-512)" if !MAXSMP
+	range 2 512
 	depends on SMP
+	default "4096" if MAXSMP
 	default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
 	default "8"
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 4096 and the
+	  kernel will support.  The maximum supported value is 512 and the
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
-endif
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
@@ -952,9 +945,9 @@ config NUMA
 	  local memory controller of the CPU and add some more
 	  NUMA awareness to the kernel.
 
-	  For i386 this is currently highly experimental and should be only
+	  For 32-bit this is currently highly experimental and should be only
 	  used for kernel development. It might also cause boot failures.
-	  For x86_64 this is recommended on all multiprocessor Opteron systems.
+	  For 64-bit this is recommended on all multiprocessor Opteron systems.
 	  If the system is EM64T, you should say N unless your system is
 	  EM64T NUMA.
 
@@ -997,17 +990,10 @@ config NUMA_EMU
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
 
-if MAXSMP
-
-config NODES_SHIFT
-	int
-	default "9"
-endif
-
-if !MAXSMP
 config NODES_SHIFT
-	int "Maximum NUMA Nodes (as a power of 2)"
+	int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
 	range 1 9   if X86_64
+	default "9" if MAXSMP
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
@@ -1015,7 +1001,6 @@ config NODES_SHIFT
 	help
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
-endif
 
 config HAVE_ARCH_BOOTMEM_NODE
 	def_bool y
@@ -1264,7 +1249,7 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "kernel crash dumps (EXPERIMENTAL)"
+	bool "kernel crash dumps"
 	depends on X86_64 || (X86_32 && HIGHMEM)
 	help
 	  Generate crash dump after being started by kexec.
@@ -1277,6 +1262,14 @@ config CRASH_DUMP
 	  (CONFIG_RELOCATABLE=y).
 	  For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on KEXEC && HIBERNATION && X86_32
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code in physical address mode via KEXEC
+
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
 	default "0x1000000" if X86_NUMAQ
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index abff1b84ed5..b225219c448 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -362,10 +362,6 @@ config X86_ALIGNMENT_16
 	def_bool y
 	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
 
-config X86_GOOD_APIC
-	def_bool y
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
-
 config X86_INTEL_USERCOPY
 	def_bool y
 	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
@@ -386,14 +382,17 @@ config X86_OOSTORE
 # P6_NOPs are a relatively minor optimization that require a family >=
 # 6 processor, except that it is broken on certain VIA chips.
 # Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs).  As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs).  In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
 #
 config X86_P6_NOP
 	def_bool y
-	depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+	depends on X86_64
+	depends on (MCORE2 || MPENTIUM4 || MPSC)
 
 config X86_TSC
 	def_bool y
@@ -418,4 +417,4 @@ config X86_MINIMUM_CPU_FAMILY
 
 config X86_DEBUGCTLMSR
 	def_bool y
-	depends on !(M586MMX || M586TSC || M586 || M486 || M386)
+	depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ae36bfa814e..092f019e033 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -5,13 +5,15 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config NONPROMISC_DEVMEM
+config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
 	help
-	  If this option is left off, you allow userspace access to all
+	  If this option is disabled, you allow userspace (root) access to all
 	  of memory, including kernel and userspace memory. Accidental
 	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
+	  be used by people debugging the kernel. Note that with PAT support
+	  enabled, even in this case there are restrictions on /dev/mem
+	  use due to the cache aliasing requirements.
 
 	  If this option is switched on, the /dev/mem file only allows
 	  userspace access to PCI space and the BIOS code and data regions.
@@ -287,7 +289,6 @@ config CPA_DEBUG
 
 config OPTIMIZE_INLINING
 	bool "Allow gcc to uninline functions marked 'inline'"
-	depends on BROKEN
 	help
 	  This option determines if the kernel forces gcc to inline the functions
 	  developers have marked 'inline'. Doing so takes away freedom from gcc to
@@ -298,5 +299,7 @@ config OPTIMIZE_INLINING
 	  become the default in the future, until then this option is there to
 	  test gcc for this.
 
+	  If unsure, say N.
+
 endmenu
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 919ce21ea65..f5631da585b 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -118,11 +118,6 @@ mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
 
-# RDC R-321x subarch support
-mflags-$(CONFIG_X86_RDC321X)	:= -Iinclude/asm-x86/mach-rdc321x
-mcore-$(CONFIG_X86_RDC321X)	:= arch/x86/mach-default/
-core-$(CONFIG_X86_RDC321X)	+= arch/x86/mach-rdc321x/
-
 # default subarch .h files
 mflags-y += -Iinclude/asm-x86/mach-default
 
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index a34b9982c7c..cc0ef13fba7 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -24,10 +24,14 @@
 #include <linux/edd.h>
 #include <asm/boot.h>
 #include <asm/setup.h>
+#include "bitops.h"
+#include <asm/cpufeature.h>
 
 /* Useful macros */
 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
 
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+
 extern struct setup_header hdr;
 extern struct boot_params boot_params;
 
@@ -242,6 +246,12 @@ int cmdline_find_option(const char *option, char *buffer, int bufsize);
 int cmdline_find_option_bool(const char *option);
 
 /* cpu.c, cpucheck.c */
+struct cpu_features {
+	int level;		/* Family, or 64 for x86-64 */
+	int model;
+	u32 flags[NCAPINTS];
+};
+extern struct cpu_features cpu;
 int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
 int validate_cpu(void);
 
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index bc5553b496f..9fea7370647 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -182,8 +182,6 @@ static unsigned		outcnt;
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 /*
  * This is set up by the setup-routine at boot-time
@@ -196,9 +194,6 @@ extern int input_len;
 
 static long bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
-
 static void *memset(void *s, int c, unsigned n);
 static void *memcpy(void *dest, const void *src, unsigned n);
 
@@ -220,40 +215,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error");
-	if (free_mem_ptr <= 0)
-		error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (memptr) *ptr;
-}
-
 static void scroll(void)
 {
 	int i;
diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c
index 92d6fd73dc7..75298fe2edc 100644
--- a/arch/x86/boot/cpu.c
+++ b/arch/x86/boot/cpu.c
@@ -16,9 +16,6 @@
  */
 
 #include "boot.h"
-#include "bitops.h"
-#include <asm/cpufeature.h>
-
 #include "cpustr.h"
 
 static char *cpu_name(int level)
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index 7804389ee00..4d3ff037201 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -22,21 +22,13 @@
 
 #ifdef _SETUP
 # include "boot.h"
-# include "bitops.h"
 #endif
 #include <linux/types.h>
-#include <asm/cpufeature.h>
 #include <asm/processor-flags.h>
 #include <asm/required-features.h>
 #include <asm/msr-index.h>
 
-struct cpu_features {
-	int level;		/* Family, or 64 for x86-64 */
-	int model;
-	u32 flags[NCAPINTS];
-};
-
-static struct cpu_features cpu;
+struct cpu_features cpu;
 static u32 cpu_vendor[3];
 static u32 err_flags[NCAPINTS];
 
@@ -46,12 +38,12 @@ static const u32 req_flags[NCAPINTS] =
 {
 	REQUIRED_MASK0,
 	REQUIRED_MASK1,
-	REQUIRED_MASK2,
-	REQUIRED_MASK3,
+	0, /* REQUIRED_MASK2 not implemented in this file */
+	0, /* REQUIRED_MASK3 not implemented in this file */
 	REQUIRED_MASK4,
-	REQUIRED_MASK5,
+	0, /* REQUIRED_MASK5 not implemented in this file */
 	REQUIRED_MASK6,
-	REQUIRED_MASK7,
+	0, /* REQUIRED_MASK7 not implemented in this file */
 };
 
 #define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 2296164b54d..197421db1af 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -73,6 +73,11 @@ static void keyboard_set_repeat(void)
  */
 static void query_ist(void)
 {
+	/* Some older BIOSes apparently crash on this call, so filter
+	   it from machines too old to have SpeedStep at all. */
+	if (cpu.level < 6)
+		return;
+
 	asm("int $0x15"
 	    : "=a" (boot_params.ist_info.signature),
 	      "=b" (boot_params.ist_info.command),
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index 53165c97336..8c3c25f3557 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -13,7 +13,6 @@
  */
 
 #include "boot.h"
-#include <linux/kernel.h>
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index a7ae4385670..8cc9eea839e 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 15:04:00 2008
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,27 +134,35 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -176,19 +186,17 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
+# CONFIG_X86_RDC321X is not set
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -215,21 +223,19 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_MPSC is not set
 CONFIG_MCORE2=y
 # CONFIG_GENERIC_CPU is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
 CONFIG_X86_CPU=y
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
 CONFIG_X86_XADD=y
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INVLPG=y
 CONFIG_X86_BSWAP=y
 CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -247,7 +253,7 @@ CONFIG_X86_IO_APIC=y
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REBOOTFIXUPS=y
 # CONFIG_MICROCODE is not set
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -256,32 +262,28 @@ CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
-CONFIG_NEED_NODE_MEMMAP_SIZE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
 CONFIG_EFI=y
 # CONFIG_IRQBALANCE is not set
 CONFIG_SECCOMP=y
@@ -293,6 +295,7 @@ CONFIG_HZ=1000
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 CONFIG_RELOCATABLE=y
 CONFIG_PHYSICAL_ALIGN=0x200000
@@ -312,6 +315,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -337,6 +341,7 @@ CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -395,8 +400,8 @@ CONFIG_PCI=y
 # CONFIG_PCI_GOBIOS is not set
 # CONFIG_PCI_GOMMCONFIG is not set
 # CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
 # CONFIG_PCI_GOOLPC is not set
+CONFIG_PCI_GOANY=y
 CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
@@ -448,10 +453,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -475,7 +476,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -618,7 +622,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -680,28 +683,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -717,6 +711,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +745,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -760,10 +757,12 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_TC1100_WMI is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -802,12 +801,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -842,7 +842,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_CS5536 is not set
 # CONFIG_PATA_CYPRESS is not set
 # CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
+CONFIG_ATA_GENERIC=y
 # CONFIG_PATA_HPT366 is not set
 # CONFIG_PATA_HPT37X is not set
 # CONFIG_PATA_HPT3X2N is not set
@@ -852,7 +852,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
+CONFIG_PATA_MPIIX=y
 CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NINJA32 is not set
@@ -871,6 +871,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -894,13 +895,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -910,7 +914,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -943,10 +963,10 @@ CONFIG_FORCEDETH=y
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
+CONFIG_NE2K_PCI=y
 # CONFIG_8139CP is not set
 CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
@@ -961,25 +981,24 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
+CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 CONFIG_SKY2=y
 # CONFIG_SKY2_DEBUG is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -1019,13 +1038,14 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
@@ -1105,6 +1125,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -1139,12 +1160,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1173,6 +1196,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1223,8 +1247,8 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
 CONFIG_HW_RANDOM_GEODE=y
 CONFIG_HW_RANDOM_VIA=y
 CONFIG_NVRAM=y
@@ -1245,7 +1269,6 @@ CONFIG_NVRAM=y
 # CONFIG_CS5535_GPIO is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 # CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
@@ -1254,43 +1277,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_SCx200_ACB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1299,6 +1343,8 @@ CONFIG_I2C_I801=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1360,8 +1406,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1372,6 +1420,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1418,7 +1467,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1463,6 +1511,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1470,6 +1519,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 
 #
 # Display device support
@@ -1488,15 +1538,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1514,20 +1556,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_PCSP is not set
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1602,36 +1638,14 @@ CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1667,6 +1681,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1690,6 +1705,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1711,6 +1727,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1719,7 +1736,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1732,7 +1748,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1749,6 +1764,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1758,7 +1774,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1804,6 +1822,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1836,11 +1855,13 @@ CONFIG_DMADEVICES=y
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
 
 #
 # File systems
@@ -1919,14 +1940,27 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -2000,9 +2034,9 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -2032,6 +2066,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -2042,23 +2077,32 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_NONPROMISC_DEVMEM is not set
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
 CONFIG_DOUBLEFAULT=y
+# CONFIG_MMIOTRACE is not set
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2070,6 +2114,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
 
 #
 # Security options
@@ -2079,7 +2124,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2140,6 +2184,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -2150,7 +2198,7 @@ CONFIG_CRYPTO_SHA1=y
 # Ciphers
 #
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_AES_586=y
 # CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -2192,6 +2240,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 743e8039273..ab91941e549 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:57 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 14:40:46 2008
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
 CONFIG_X86_64=y
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 # CONFIG_KTIME_SCALAR is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,25 +134,33 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -175,20 +185,15 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_PARAVIRT_GUEST is not set
-CONFIG_MEMTEST_BOOTPARAM=y
-CONFIG_MEMTEST_BOOTPARAM_VALUE=0
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -220,11 +225,12 @@ CONFIG_X86_L1_CACHE_BYTES=64
 CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_CMPXCHG=y
 CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
 CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=64
 CONFIG_X86_DEBUGCTLMSR=y
@@ -234,8 +240,10 @@ CONFIG_DMI=y
 CONFIG_GART_IOMMU=y
 CONFIG_CALGARY_IOMMU=y
 CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_AMD_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
 CONFIG_NR_CPUS=4
 # CONFIG_SCHED_SMT is not set
 CONFIG_SCHED_MC=y
@@ -281,6 +289,7 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
 # CONFIG_X86_PAT is not set
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
@@ -313,6 +322,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -339,6 +349,7 @@ CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -437,10 +448,6 @@ CONFIG_IA32_EMULATION=y
 CONFIG_COMPAT=y
 CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -464,7 +471,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -607,7 +617,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -669,28 +678,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -706,6 +706,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -738,6 +740,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -748,10 +751,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ASUS_LAPTOP is not set
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_SGI_XP is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_SGI_GRU is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -790,12 +797,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -857,6 +865,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -880,13 +889,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -896,7 +908,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -940,16 +968,15 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -965,6 +992,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -1003,13 +1031,14 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
@@ -1088,6 +1117,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -1122,12 +1152,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1155,6 +1187,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1222,7 +1255,6 @@ CONFIG_NVRAM=y
 # CONFIG_PC8736x_GPIO is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 # CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
@@ -1231,42 +1263,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1275,6 +1328,8 @@ CONFIG_I2C_I801=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1335,8 +1390,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1347,6 +1404,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1387,7 +1445,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1430,6 +1487,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1437,6 +1495,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 
 #
 # Display device support
@@ -1455,15 +1514,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1481,20 +1532,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_PCSP is not set
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1567,36 +1612,14 @@ CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1632,6 +1655,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1655,6 +1679,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1676,6 +1701,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1684,7 +1710,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1697,7 +1722,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1714,6 +1738,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1723,7 +1748,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1769,6 +1796,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1801,11 +1829,13 @@ CONFIG_DMADEVICES=y
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
 
 #
 # File systems
@@ -1885,14 +1915,27 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -1966,9 +2009,9 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1997,6 +2040,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -2007,11 +2051,20 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_NONPROMISC_DEVMEM is not set
+# CONFIG_KGDB is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -2022,8 +2075,8 @@ CONFIG_DEBUG_RODATA=y
 # CONFIG_DIRECT_GBPAGES is not set
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
-CONFIG_X86_MPPARSE=y
 # CONFIG_IOMMU_DEBUG is not set
+# CONFIG_MMIOTRACE is not set
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2035,6 +2088,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
 
 #
 # Security options
@@ -2044,7 +2098,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2105,6 +2158,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -2154,6 +2211,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 58cccb6483b..a0e1dbe67dc 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -441,12 +441,6 @@ beyond_if:
 	regs->r8 = regs->r9 = regs->r10 = regs->r11 =
 	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
 	set_fs(USER_DS);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	return 0;
 }
 
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index cb3856a18c8..20af4c79579 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -36,6 +36,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+#define FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_OF | \
+			 X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
+			 X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
+			 X86_EFLAGS_CF)
+
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 
@@ -248,7 +253,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 	regs->ss |= 3;
 
 	err |= __get_user(tmpflags, &sc->flags);
-	regs->flags = (regs->flags & ~0x40DD5) | (tmpflags & 0x40DD5);
+	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
 	/* disable syscall checks */
 	regs->orig_ax = -1;
 
@@ -515,7 +520,6 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			compat_sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
-	struct exec_domain *ed = current_thread_info()->exec_domain;
 	void __user *restorer;
 	int err = 0;
 
@@ -538,8 +542,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
 
-	err |= __put_user((ed && ed->signal_invmap && sig < 32
-			   ? ed->signal_invmap[sig] : sig), &frame->sig);
+	err |= __put_user(sig, &frame->sig);
 	err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
 	err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
 	err |= copy_siginfo_to_user32(&frame->info, info);
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 20371d0635e..ffc1bb4fed7 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -15,6 +15,16 @@
 #include <asm/irqflags.h>
 #include <linux/linkage.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysexit_audit int_ret_from_sys_call
+#define sysretl_audit int_ret_from_sys_call
+#endif
+
 #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
 
 	.macro IA32_ARG_FIXUP noebp=0
@@ -37,6 +47,11 @@
 	movq	%rax,R8(%rsp)
 	.endm
 
+	/*
+	 * Reload arg registers from stack in case ptrace changed them.
+	 * We don't reload %eax because syscall_trace_enter() returned
+	 * the value it wants us to use in the table lookup.
+	 */
 	.macro LOAD_ARGS32 offset
 	movl \offset(%rsp),%r11d
 	movl \offset+8(%rsp),%r10d
@@ -46,7 +61,6 @@
 	movl \offset+48(%rsp),%edx
 	movl \offset+56(%rsp),%esi
 	movl \offset+64(%rsp),%edi
-	movl \offset+72(%rsp),%eax
 	.endm
 	
 	.macro CFI_STARTPROC32 simple
@@ -137,21 +151,22 @@ ENTRY(ia32_sysenter_target)
  	.previous	
 	GET_THREAD_INFO(%r10)
 	orl    $TS_COMPAT,TI_status(%r10)
-	testl  $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-		 TI_flags(%r10)
+	testl  $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz  sysenter_tracesys
-sysenter_do_call:	
 	cmpl	$(IA32_NR_syscalls-1),%eax
 	ja	ia32_badsys
+sysenter_do_call:
 	IA32_ARG_FIXUP 1
+sysenter_dispatch:
 	call	*ia32_sys_call_table(,%rax,8)
 	movq	%rax,RAX-ARGOFFSET(%rsp)
 	GET_THREAD_INFO(%r10)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl	$_TIF_ALLWORK_MASK,TI_flags(%r10)
-	jnz	int_ret_from_sys_call
+	jnz	sysexit_audit
+sysexit_from_sys_call:
 	andl    $~TS_COMPAT,TI_status(%r10)
 	/* clear IF, that popfq doesn't enable interrupts early */
 	andl  $~0x200,EFLAGS-R11(%rsp) 
@@ -167,9 +182,63 @@ sysenter_do_call:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS_SYSEXIT32
 
-sysenter_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	.macro auditsys_entry_common
+	movl %esi,%r9d			/* 6th arg: 4th syscall arg */
+	movl %edx,%r8d			/* 5th arg: 3rd syscall arg */
+	/* (already in %ecx)		   4th arg: 2nd syscall arg */
+	movl %ebx,%edx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%esi			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%edi	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall number */
+	cmpl $(IA32_NR_syscalls-1),%eax
+	ja ia32_badsys
+	movl %ebx,%edi			/* reload 1st syscall arg */
+	movl RCX-ARGOFFSET(%rsp),%esi	/* reload 2nd syscall arg */
+	movl RDX-ARGOFFSET(%rsp),%edx	/* reload 3rd syscall arg */
+	movl RSI-ARGOFFSET(%rsp),%ecx	/* reload 4th syscall arg */
+	movl RDI-ARGOFFSET(%rsp),%r8d	/* reload 5th syscall arg */
+	.endm
+
+	.macro auditsys_exit exit,ebpsave=RBP
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jnz int_ret_from_sys_call
+	TRACE_IRQS_ON
+	sti
+	movl %eax,%esi		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%edi		/* zero-extend that into %edi */
+	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	GET_THREAD_INFO(%r10)
+	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall return value */
+	movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */
+	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+	cli
+	TRACE_IRQS_OFF
+	testl %edi,TI_flags(%r10)
+	jnz int_with_check
+	jmp \exit
+	.endm
+
+sysenter_auditsys:
 	CFI_RESTORE_STATE
+	auditsys_entry_common
+	movl %ebp,%r9d			/* reload 6th syscall arg */
+	jmp sysenter_dispatch
+
+sysexit_audit:
+	auditsys_exit sysexit_from_sys_call
+#endif
+
+sysenter_tracesys:
 	xchgl	%r9d,%ebp
+#ifdef CONFIG_AUDITSYSCALL
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jz	sysenter_auditsys
+#endif
 	SAVE_REST
 	CLEAR_RREGS
 	movq	%r9,R9(%rsp)
@@ -242,21 +311,22 @@ ENTRY(ia32_cstar_target)
 	.previous	
 	GET_THREAD_INFO(%r10)
 	orl   $TS_COMPAT,TI_status(%r10)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-		TI_flags(%r10)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz   cstar_tracesys
 cstar_do_call:	
 	cmpl $IA32_NR_syscalls-1,%eax
 	ja  ia32_badsys
 	IA32_ARG_FIXUP 1
+cstar_dispatch:
 	call *ia32_sys_call_table(,%rax,8)
 	movq %rax,RAX-ARGOFFSET(%rsp)
 	GET_THREAD_INFO(%r10)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
-	jnz  int_ret_from_sys_call
+	jnz sysretl_audit
+sysretl_from_sys_call:
 	andl $~TS_COMPAT,TI_status(%r10)
 	RESTORE_ARGS 1,-ARG_SKIP,1,1,1
 	movl RIP-ARGOFFSET(%rsp),%ecx
@@ -268,8 +338,23 @@ cstar_do_call:
 	CFI_RESTORE rsp
 	USERGS_SYSRET32
 	
-cstar_tracesys:	
+#ifdef CONFIG_AUDITSYSCALL
+cstar_auditsys:
 	CFI_RESTORE_STATE
+	movl %r9d,R9-ARGOFFSET(%rsp)	/* register to be clobbered by call */
+	auditsys_entry_common
+	movl R9-ARGOFFSET(%rsp),%r9d	/* reload 6th syscall arg */
+	jmp cstar_dispatch
+
+sysretl_audit:
+	auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */
+#endif
+
+cstar_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jz cstar_auditsys
+#endif
 	xchgl %r9d,%ebp
 	SAVE_REST
 	CLEAR_RREGS
@@ -321,6 +406,7 @@ ENTRY(ia32_syscall)
 	/*CFI_REL_OFFSET	rflags,EFLAGS-RIP*/
 	/*CFI_REL_OFFSET	cs,CS-RIP*/
 	CFI_REL_OFFSET	rip,RIP-RIP
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	SWAPGS
 	/*
 	 * No need to follow this irqs on/off section: the syscall
@@ -336,8 +422,7 @@ ENTRY(ia32_syscall)
 	SAVE_ARGS 0,0,1
 	GET_THREAD_INFO(%r10)
 	orl   $TS_COMPAT,TI_status(%r10)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-		TI_flags(%r10)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	jnz ia32_tracesys
 ia32_do_syscall:	
 	cmpl $(IA32_NR_syscalls-1),%eax
@@ -741,4 +826,10 @@ ia32_sys_call_table:
 	.quad sys32_fallocate
 	.quad compat_sys_timerfd_settime	/* 325 */
 	.quad compat_sys_timerfd_gettime
+	.quad compat_sys_signalfd4
+	.quad sys_eventfd2
+	.quad sys_epoll_create1
+	.quad sys_dup3			/* 330 */
+	.quad sys_pipe2
+	.quad sys_inotify_init1
 ia32_syscall_end:
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index f00afdf61e6..d3c64088b98 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -238,7 +238,7 @@ asmlinkage long sys32_pipe(int __user *fd)
 	int retval;
 	int fds[2];
 
-	retval = do_pipe(fds);
+	retval = do_pipe_flags(fds, 0);
 	if (retval)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index da140611bb5..3db651fc8ec 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -7,9 +7,10 @@ extra-y                := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinu
 CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
 ifdef CONFIG_FTRACE
-# Do not profile debug utilities
+# Do not profile debug and lowlevel utilities
 CFLAGS_REMOVE_tsc.o = -pg
 CFLAGS_REMOVE_rtc.o = -pg
+CFLAGS_REMOVE_paravirt.o = -pg
 endif
 
 #
@@ -102,6 +103,7 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
+	obj-y				+= bios_uv.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index f489d7a9be9..bfd10fd211c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -97,6 +97,8 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 #warning ACPI uses CMPXCHG, i486 and later hardware
 #endif
 
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
 /* --------------------------------------------------------------------------
                               Boot-time Configuration
    -------------------------------------------------------------------------- */
@@ -158,6 +160,14 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 struct acpi_mcfg_allocation *pci_mmcfg_config;
 int pci_mmcfg_config_num;
 
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+	if (!strcmp(mcfg->header.oem_id, "SGI"))
+		acpi_mcfg_64bit_base_addr = TRUE;
+
+	return 0;
+}
+
 int __init acpi_parse_mcfg(struct acpi_table_header *header)
 {
 	struct acpi_table_mcfg *mcfg;
@@ -190,8 +200,12 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header)
 	}
 
 	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+	acpi_mcfg_oem_check(mcfg);
+
 	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
+		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+		    !acpi_mcfg_64bit_base_addr) {
 			printk(KERN_ERR PREFIX
 			       "MMCONFIG not in low 4GB of memory\n");
 			kfree(pci_mmcfg_config);
@@ -1021,7 +1035,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
 #endif
 	set_bit(MP_ISA_BUS, mp_bus_not_pci);
-	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+	pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
 
 #ifdef CONFIG_X86_ES7000
 	/*
@@ -1127,8 +1141,8 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		return gsi;
 	}
 	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
-			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+		pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n",
+			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
 #ifdef CONFIG_X86_32
 		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
 #else
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index a3ddad18aaa..426e5d91b63 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -20,7 +20,7 @@ unsigned long acpi_realmode_flags;
 /* address in low memory of the wakeup routine. */
 static unsigned long acpi_realmode;
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
 static char temp_stack[10240];
 #endif
 
@@ -86,7 +86,7 @@ int acpi_save_state_mem(void)
 #endif /* !CONFIG_64BIT */
 
 	header->pmode_cr0 = read_cr0();
-	header->pmode_cr4 = read_cr4();
+	header->pmode_cr4 = read_cr4_safe();
 	header->realmode_flags = acpi_realmode_flags;
 	header->real_magic = 0x12345678;
 
@@ -150,6 +150,10 @@ static int __init acpi_sleep_setup(char *str)
 			acpi_realmode_flags |= 2;
 		if (strncmp(str, "s3_beep", 7) == 0)
 			acpi_realmode_flags |= 4;
+#ifdef CONFIG_HIBERNATION
+		if (strncmp(str, "s4_nohwsig", 10) == 0)
+			acpi_no_s4_hw_signature();
+#endif
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 2763cb37b55..65a0c1b4869 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 extern char __vsyscall_0;
 const unsigned char *const *find_nop_table(void)
 {
-	return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
-	       boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+	    boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return k8_nops;
 }
 
 #else /* CONFIG_X86_64 */
 
-static const struct nop {
-	int cpuid;
-	const unsigned char *const *noptable;
-} noptypes[] = {
-	{ X86_FEATURE_K8, k8_nops },
-	{ X86_FEATURE_K7, k7_nops },
-	{ X86_FEATURE_P4, p6_nops },
-	{ X86_FEATURE_P3, p6_nops },
-	{ -1, NULL }
-};
-
 const unsigned char *const *find_nop_table(void)
 {
-	const unsigned char *const *noptable = intel_nops;
-	int i;
-
-	for (i = 0; noptypes[i].cpuid >= 0; i++) {
-		if (boot_cpu_has(noptypes[i].cpuid)) {
-			noptable = noptypes[i].noptable;
-			break;
-		}
-	}
-	return noptable;
+	if (boot_cpu_has(X86_FEATURE_K8))
+		return k8_nops;
+	else if (boot_cpu_has(X86_FEATURE_K7))
+		return k7_nops;
+	else if (boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return intel_nops;
 }
 
 #endif /* CONFIG_X86_64 */
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index f2766d84c7a..042fdc27bc9 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -23,36 +23,49 @@
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
 #include <asm/proto.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
 
 #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
 
-#define to_pages(addr, size) \
-	 (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
+#define EXIT_LOOP_COUNT 10000000
 
 static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 
-struct command {
+/*
+ * general struct to manage commands send to an IOMMU
+ */
+struct iommu_cmd {
 	u32 data[4];
 };
 
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e);
 
+/* returns !0 if the IOMMU is caching non-present entries in its TLB */
 static int iommu_has_npcache(struct amd_iommu *iommu)
 {
 	return iommu->cap & IOMMU_CAP_NPCACHE;
 }
 
-static int __iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
+/****************************************************************************
+ *
+ * IOMMU command queuing functions
+ *
+ ****************************************************************************/
+
+/*
+ * Writes the command to the IOMMUs command buffer and informs the
+ * hardware about the new command. Must be called with iommu->lock held.
+ */
+static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 {
 	u32 tail, head;
 	u8 *target;
 
 	tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-	target = (iommu->cmd_buf + tail);
+	target = iommu->cmd_buf + tail;
 	memcpy_toio(target, cmd, sizeof(*cmd));
 	tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
 	head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
@@ -63,7 +76,11 @@ static int __iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
 	return 0;
 }
 
-static int iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
+/*
+ * General queuing function for commands. Takes iommu->lock and calls
+ * __iommu_queue_command().
+ */
+static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 {
 	unsigned long flags;
 	int ret;
@@ -75,35 +92,59 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
 	return ret;
 }
 
+/*
+ * This function is called whenever we need to ensure that the IOMMU has
+ * completed execution of all commands we sent. It sends a
+ * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs
+ * us about that by writing a value to a physical address we pass with
+ * the command.
+ */
 static int iommu_completion_wait(struct amd_iommu *iommu)
 {
-	int ret;
-	struct command cmd;
-	volatile u64 ready = 0;
-	unsigned long ready_phys = virt_to_phys(&ready);
+	int ret = 0, ready = 0;
+	unsigned status = 0;
+	struct iommu_cmd cmd;
+	unsigned long flags, i = 0;
 
 	memset(&cmd, 0, sizeof(cmd));
-	cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
-	cmd.data[1] = HIGH_U32(ready_phys);
-	cmd.data[2] = 1; /* value written to 'ready' */
+	cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
 	CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
 
 	iommu->need_sync = 0;
 
-	ret = iommu_queue_command(iommu, &cmd);
+	spin_lock_irqsave(&iommu->lock, flags);
+
+	ret = __iommu_queue_command(iommu, &cmd);
 
 	if (ret)
-		return ret;
+		goto out;
+
+	while (!ready && (i < EXIT_LOOP_COUNT)) {
+		++i;
+		/* wait for the bit to become one */
+		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+		ready = status & MMIO_STATUS_COM_WAIT_INT_MASK;
+	}
 
-	while (!ready)
-		cpu_relax();
+	/* set bit back to zero */
+	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
+	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
+
+	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
+		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+out:
+	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	return 0;
 }
 
+/*
+ * Command send function for invalidating a device table entry
+ */
 static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 {
-	struct command cmd;
+	struct iommu_cmd cmd;
+	int ret;
 
 	BUG_ON(iommu == NULL);
 
@@ -111,37 +152,50 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 	CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
 	cmd.data[0] = devid;
 
+	ret = iommu_queue_command(iommu, &cmd);
+
 	iommu->need_sync = 1;
 
-	return iommu_queue_command(iommu, &cmd);
+	return ret;
 }
 
+/*
+ * Generic command send function for invalidaing TLB entries
+ */
 static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 		u64 address, u16 domid, int pde, int s)
 {
-	struct command cmd;
+	struct iommu_cmd cmd;
+	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
 	address &= PAGE_MASK;
 	CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
 	cmd.data[1] |= domid;
-	cmd.data[2] = LOW_U32(address);
-	cmd.data[3] = HIGH_U32(address);
-	if (s)
+	cmd.data[2] = lower_32_bits(address);
+	cmd.data[3] = upper_32_bits(address);
+	if (s) /* size bit - we flush more than one 4kb page */
 		cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
-	if (pde)
+	if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
 		cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
 
+	ret = iommu_queue_command(iommu, &cmd);
+
 	iommu->need_sync = 1;
 
-	return iommu_queue_command(iommu, &cmd);
+	return ret;
 }
 
+/*
+ * TLB invalidation function which is called from the mapping functions.
+ * It invalidates a single PTE if the range to flush is within a single
+ * page. Otherwise it flushes the whole TLB of the IOMMU.
+ */
 static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 		u64 address, size_t size)
 {
 	int s = 0;
-	unsigned pages = to_pages(address, size);
+	unsigned pages = iommu_num_pages(address, size);
 
 	address &= PAGE_MASK;
 
@@ -159,6 +213,20 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 	return 0;
 }
 
+/****************************************************************************
+ *
+ * The functions below are used the create the page table mappings for
+ * unity mapped regions.
+ *
+ ****************************************************************************/
+
+/*
+ * Generic mapping functions. It maps a physical address into a DMA
+ * address space. It allocates the page table pages if necessary.
+ * In the future it can be extended to a generic mapping function
+ * supporting all features of AMD IOMMU page tables like level skipping
+ * and full 64 bit address spaces.
+ */
 static int iommu_map(struct protection_domain *dom,
 		     unsigned long bus_addr,
 		     unsigned long phys_addr,
@@ -209,6 +277,10 @@ static int iommu_map(struct protection_domain *dom,
 	return 0;
 }
 
+/*
+ * This function checks if a specific unity mapping entry is needed for
+ * this specific IOMMU.
+ */
 static int iommu_for_unity_map(struct amd_iommu *iommu,
 			       struct unity_map_entry *entry)
 {
@@ -223,6 +295,12 @@ static int iommu_for_unity_map(struct amd_iommu *iommu,
 	return 0;
 }
 
+/*
+ * Init the unity mappings for a specific IOMMU in the system
+ *
+ * Basically iterates over all unity mapping entries and applies them to
+ * the default domain DMA of that IOMMU if necessary.
+ */
 static int iommu_init_unity_mappings(struct amd_iommu *iommu)
 {
 	struct unity_map_entry *entry;
@@ -239,6 +317,10 @@ static int iommu_init_unity_mappings(struct amd_iommu *iommu)
 	return 0;
 }
 
+/*
+ * This function actually applies the mapping to the page table of the
+ * dma_ops domain.
+ */
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e)
 {
@@ -261,6 +343,9 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 	return 0;
 }
 
+/*
+ * Inits the unity mappings required for a specific device
+ */
 static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
 					  u16 devid)
 {
@@ -278,12 +363,26 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
 	return 0;
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the address allocator for the dma_ops
+ * interface functions. They work like the allocators in the other IOMMU
+ * drivers. Its basically a bitmap which marks the allocated pages in
+ * the aperture. Maybe it could be enhanced in the future to a more
+ * efficient allocator.
+ *
+ ****************************************************************************/
 static unsigned long dma_mask_to_pages(unsigned long mask)
 {
 	return (mask >> PAGE_SHIFT) +
 		(PAGE_ALIGN(mask & ~PAGE_MASK) >> PAGE_SHIFT);
 }
 
+/*
+ * The address allocator core function.
+ *
+ * called with domain->lock held
+ */
 static unsigned long dma_ops_alloc_addresses(struct device *dev,
 					     struct dma_ops_domain *dom,
 					     unsigned int pages)
@@ -317,6 +416,11 @@ static unsigned long dma_ops_alloc_addresses(struct device *dev,
 	return address;
 }
 
+/*
+ * The address free function.
+ *
+ * called with domain->lock held
+ */
 static void dma_ops_free_addresses(struct dma_ops_domain *dom,
 				   unsigned long address,
 				   unsigned int pages)
@@ -325,6 +429,16 @@ static void dma_ops_free_addresses(struct dma_ops_domain *dom,
 	iommu_area_free(dom->bitmap, address, pages);
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the domain allocation. A domain is
+ * allocated for every IOMMU as the default domain. If device isolation
+ * is enabled, every device get its own domain. The most important thing
+ * about domains is the page table mapping the DMA address space they
+ * contain.
+ *
+ ****************************************************************************/
+
 static u16 domain_id_alloc(void)
 {
 	unsigned long flags;
@@ -342,6 +456,10 @@ static u16 domain_id_alloc(void)
 	return id;
 }
 
+/*
+ * Used to reserve address ranges in the aperture (e.g. for exclusion
+ * ranges.
+ */
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages)
@@ -382,6 +500,10 @@ static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
 	free_page((unsigned long)p1);
 }
 
+/*
+ * Free a domain, only used if something went wrong in the
+ * allocation path and we need to free an already allocated page table
+ */
 static void dma_ops_domain_free(struct dma_ops_domain *dom)
 {
 	if (!dom)
@@ -396,6 +518,11 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
 	kfree(dom);
 }
 
+/*
+ * Allocates a new protection domain usable for the dma_ops functions.
+ * It also intializes the page table and the address allocator data
+ * structures required for the dma_ops interface
+ */
 static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
 						   unsigned order)
 {
@@ -436,14 +563,20 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
 	dma_dom->bitmap[0] = 1;
 	dma_dom->next_bit = 0;
 
+	/* Intialize the exclusion range if necessary */
 	if (iommu->exclusion_start &&
 	    iommu->exclusion_start < dma_dom->aperture_size) {
 		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
-		int pages = to_pages(iommu->exclusion_start,
-				iommu->exclusion_length);
+		int pages = iommu_num_pages(iommu->exclusion_start,
+					    iommu->exclusion_length);
 		dma_ops_reserve_addresses(dma_dom, startpage, pages);
 	}
 
+	/*
+	 * At the last step, build the page tables so we don't need to
+	 * allocate page table pages in the dma_ops mapping/unmapping
+	 * path.
+	 */
 	num_pte_pages = dma_dom->aperture_size / (PAGE_SIZE * 512);
 	dma_dom->pte_pages = kzalloc(num_pte_pages * sizeof(void *),
 			GFP_KERNEL);
@@ -472,6 +605,10 @@ free_dma_dom:
 	return NULL;
 }
 
+/*
+ * Find out the protection domain structure for a given PCI device. This
+ * will give us the pointer to the page table root for example.
+ */
 static struct protection_domain *domain_for_device(u16 devid)
 {
 	struct protection_domain *dom;
@@ -484,6 +621,10 @@ static struct protection_domain *domain_for_device(u16 devid)
 	return dom;
 }
 
+/*
+ * If a device is not yet associated with a domain, this function does
+ * assigns it visible for the hardware
+ */
 static void set_device_domain(struct amd_iommu *iommu,
 			      struct protection_domain *domain,
 			      u16 devid)
@@ -508,6 +649,19 @@ static void set_device_domain(struct amd_iommu *iommu,
 	iommu->need_sync = 1;
 }
 
+/*****************************************************************************
+ *
+ * The next functions belong to the dma_ops mapping/unmapping code.
+ *
+ *****************************************************************************/
+
+/*
+ * In the dma_ops path we only have the struct device. This function
+ * finds the corresponding IOMMU, the protection domain and the
+ * requestor id for a given device.
+ * If the device is not yet associated with a domain this is also done
+ * in this function.
+ */
 static int get_device_resources(struct device *dev,
 				struct amd_iommu **iommu,
 				struct protection_domain **domain,
@@ -520,9 +674,10 @@ static int get_device_resources(struct device *dev,
 	BUG_ON(!dev || dev->bus != &pci_bus_type || !dev->dma_mask);
 
 	pcidev = to_pci_dev(dev);
-	_bdf = (pcidev->bus->number << 8) | pcidev->devfn;
+	_bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
 
-	if (_bdf >= amd_iommu_last_bdf) {
+	/* device not translated by any IOMMU in the system? */
+	if (_bdf > amd_iommu_last_bdf) {
 		*iommu = NULL;
 		*domain = NULL;
 		*bdf = 0xffff;
@@ -547,6 +702,10 @@ static int get_device_resources(struct device *dev,
 	return 1;
 }
 
+/*
+ * This is the generic map function. It maps one 4kb page at paddr to
+ * the given address in the DMA address space for the domain.
+ */
 static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
 				     struct dma_ops_domain *dom,
 				     unsigned long address,
@@ -578,6 +737,9 @@ static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
 	return (dma_addr_t)address;
 }
 
+/*
+ * The generic unmapping function for on page in the DMA address space.
+ */
 static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 				 struct dma_ops_domain *dom,
 				 unsigned long address)
@@ -597,6 +759,12 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 	*pte = 0ULL;
 }
 
+/*
+ * This function contains common code for mapping of a physically
+ * contiguous memory region into DMA address space. It is uses by all
+ * mapping functions provided by this IOMMU driver.
+ * Must be called with the domain lock held.
+ */
 static dma_addr_t __map_single(struct device *dev,
 			       struct amd_iommu *iommu,
 			       struct dma_ops_domain *dma_dom,
@@ -609,7 +777,7 @@ static dma_addr_t __map_single(struct device *dev,
 	unsigned int pages;
 	int i;
 
-	pages = to_pages(paddr, size);
+	pages = iommu_num_pages(paddr, size);
 	paddr &= PAGE_MASK;
 
 	address = dma_ops_alloc_addresses(dev, dma_dom, pages);
@@ -628,6 +796,10 @@ out:
 	return address;
 }
 
+/*
+ * Does the reverse of the __map_single function. Must be called with
+ * the domain lock held too
+ */
 static void __unmap_single(struct amd_iommu *iommu,
 			   struct dma_ops_domain *dma_dom,
 			   dma_addr_t dma_addr,
@@ -640,7 +812,7 @@ static void __unmap_single(struct amd_iommu *iommu,
 	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
 		return;
 
-	pages = to_pages(dma_addr, size);
+	pages = iommu_num_pages(dma_addr, size);
 	dma_addr &= PAGE_MASK;
 	start = dma_addr;
 
@@ -652,6 +824,9 @@ static void __unmap_single(struct amd_iommu *iommu,
 	dma_ops_free_addresses(dma_dom, dma_addr, pages);
 }
 
+/*
+ * The exported map_single function for dma_ops.
+ */
 static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
 			     size_t size, int dir)
 {
@@ -664,6 +839,7 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
 	get_device_resources(dev, &iommu, &domain, &devid);
 
 	if (iommu == NULL || domain == NULL)
+		/* device not handled by any AMD IOMMU */
 		return (dma_addr_t)paddr;
 
 	spin_lock_irqsave(&domain->lock, flags);
@@ -683,6 +859,9 @@ out:
 	return addr;
 }
 
+/*
+ * The exported unmap_single function for dma_ops.
+ */
 static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 			 size_t size, int dir)
 {
@@ -692,6 +871,7 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 	u16 devid;
 
 	if (!get_device_resources(dev, &iommu, &domain, &devid))
+		/* device not handled by any AMD IOMMU */
 		return;
 
 	spin_lock_irqsave(&domain->lock, flags);
@@ -706,6 +886,10 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
+/*
+ * This is a special map_sg function which is used if we should map a
+ * device which is not handled by an AMD IOMMU in the system.
+ */
 static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist,
 			   int nelems, int dir)
 {
@@ -720,6 +904,10 @@ static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist,
 	return nelems;
 }
 
+/*
+ * The exported map_sg function for dma_ops (handles scatter-gather
+ * lists).
+ */
 static int map_sg(struct device *dev, struct scatterlist *sglist,
 		  int nelems, int dir)
 {
@@ -775,6 +963,10 @@ unmap:
 	goto out;
 }
 
+/*
+ * The exported map_sg function for dma_ops (handles scatter-gather
+ * lists).
+ */
 static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 		     int nelems, int dir)
 {
@@ -804,6 +996,9 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
+/*
+ * The exported alloc_coherent function for dma_ops.
+ */
 static void *alloc_coherent(struct device *dev, size_t size,
 			    dma_addr_t *dma_addr, gfp_t flag)
 {
@@ -851,6 +1046,11 @@ out:
 	return virt_addr;
 }
 
+/*
+ * The exported free_coherent function for dma_ops.
+ * FIXME: fix the generic x86 DMA layer so that it actually calls that
+ *        function.
+ */
 static void free_coherent(struct device *dev, size_t size,
 			  void *virt_addr, dma_addr_t dma_addr)
 {
@@ -879,6 +1079,8 @@ free_mem:
 }
 
 /*
+ * The function for pre-allocating protection domains.
+ *
  * If the driver core informs the DMA layer if a driver grabs a device
  * we don't need to preallocate the protection domains anymore.
  * For now we have to.
@@ -893,7 +1095,7 @@ void prealloc_protection_domains(void)
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		devid = (dev->bus->number << 8) | dev->devfn;
-		if (devid >= amd_iommu_last_bdf)
+		if (devid > amd_iommu_last_bdf)
 			continue;
 		devid = amd_iommu_alias_table[devid];
 		if (domain_for_device(devid))
@@ -921,12 +1123,20 @@ static struct dma_mapping_ops amd_iommu_dma_ops = {
 	.unmap_sg = unmap_sg,
 };
 
+/*
+ * The function which clues the AMD IOMMU driver into dma_ops.
+ */
 int __init amd_iommu_init_dma_ops(void)
 {
 	struct amd_iommu *iommu;
 	int order = amd_iommu_aperture_order;
 	int ret;
 
+	/*
+	 * first allocate a default protection domain for every IOMMU we
+	 * found in the system. Devices not assigned to any other
+	 * protection domain will be assigned to the default one.
+	 */
 	list_for_each_entry(iommu, &amd_iommu_list, list) {
 		iommu->default_dom = dma_ops_domain_alloc(iommu, order);
 		if (iommu->default_dom == NULL)
@@ -936,6 +1146,10 @@ int __init amd_iommu_init_dma_ops(void)
 			goto free_domains;
 	}
 
+	/*
+	 * If device isolation is enabled, pre-allocate the protection
+	 * domains for each device.
+	 */
 	if (amd_iommu_isolate)
 		prealloc_protection_domains();
 
@@ -947,6 +1161,7 @@ int __init amd_iommu_init_dma_ops(void)
 	gart_iommu_aperture = 0;
 #endif
 
+	/* Make the driver finally visible to the drivers */
 	dma_ops = &amd_iommu_dma_ops;
 
 	return 0;
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 2a13e430437..a69cc0f5204 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -25,20 +25,13 @@
 #include <asm/pci-direct.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 
 /*
  * definitions for the ACPI scanning code
  */
-#define UPDATE_LAST_BDF(x) do {\
-	if ((x) > amd_iommu_last_bdf) \
-		amd_iommu_last_bdf = (x); \
-	} while (0);
-
-#define DEVID(bus, devfn) (((bus) << 8) | (devfn))
 #define PCI_BUS(x) (((x) >> 8) & 0xff)
 #define IVRS_HEADER_LENGTH 48
-#define TBL_SIZE(x) (1 << (PAGE_SHIFT + get_order(amd_iommu_last_bdf * (x))))
 
 #define ACPI_IVHD_TYPE                  0x10
 #define ACPI_IVMD_TYPE_ALL              0x20
@@ -71,6 +64,17 @@
 #define ACPI_DEVFLAG_LINT1              0x80
 #define ACPI_DEVFLAG_ATSDIS             0x10000000
 
+/*
+ * ACPI table definitions
+ *
+ * These data structures are laid over the table to parse the important values
+ * out of it.
+ */
+
+/*
+ * structure describing one IOMMU in the ACPI table. Typically followed by one
+ * or more ivhd_entrys.
+ */
 struct ivhd_header {
 	u8 type;
 	u8 flags;
@@ -83,6 +87,10 @@ struct ivhd_header {
 	u32 reserved;
 } __attribute__((packed));
 
+/*
+ * A device entry describing which devices a specific IOMMU translates and
+ * which requestor ids they use.
+ */
 struct ivhd_entry {
 	u8 type;
 	u16 devid;
@@ -90,6 +98,10 @@ struct ivhd_entry {
 	u32 ext;
 } __attribute__((packed));
 
+/*
+ * An AMD IOMMU memory definition structure. It defines things like exclusion
+ * ranges for devices and regions that should be unity mapped.
+ */
 struct ivmd_header {
 	u8 type;
 	u8 flags;
@@ -103,22 +115,80 @@ struct ivmd_header {
 
 static int __initdata amd_iommu_detected;
 
-u16 amd_iommu_last_bdf;
-struct list_head amd_iommu_unity_map;
-unsigned amd_iommu_aperture_order = 26;
-int amd_iommu_isolate;
+u16 amd_iommu_last_bdf;			/* largest PCI device id we have
+					   to handle */
+LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
+					   we find in ACPI */
+unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */
+int amd_iommu_isolate;			/* if 1, device isolation is enabled */
+
+LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
+					   system */
 
-struct list_head amd_iommu_list;
+/*
+ * Pointer to the device table which is shared by all AMD IOMMUs
+ * it is indexed by the PCI device id or the HT unit id and contains
+ * information about the domain the device belongs to as well as the
+ * page table root pointer.
+ */
 struct dev_table_entry *amd_iommu_dev_table;
+
+/*
+ * The alias table is a driver specific data structure which contains the
+ * mappings of the PCI device ids to the actual requestor ids on the IOMMU.
+ * More than one device can share the same requestor id.
+ */
 u16 *amd_iommu_alias_table;
+
+/*
+ * The rlookup table is used to find the IOMMU which is responsible
+ * for a specific device. It is also indexed by the PCI device id.
+ */
 struct amd_iommu **amd_iommu_rlookup_table;
+
+/*
+ * The pd table (protection domain table) is used to find the protection domain
+ * data structure a device belongs to. Indexed with the PCI device id too.
+ */
 struct protection_domain **amd_iommu_pd_table;
+
+/*
+ * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap
+ * to know which ones are already in use.
+ */
 unsigned long *amd_iommu_pd_alloc_bitmap;
 
-static u32 dev_table_size;
-static u32 alias_table_size;
-static u32 rlookup_table_size;
+static u32 dev_table_size;	/* size of the device table */
+static u32 alias_table_size;	/* size of the alias table */
+static u32 rlookup_table_size;	/* size if the rlookup table */
+
+static inline void update_last_devid(u16 devid)
+{
+	if (devid > amd_iommu_last_bdf)
+		amd_iommu_last_bdf = devid;
+}
+
+static inline unsigned long tbl_size(int entry_size)
+{
+	unsigned shift = PAGE_SHIFT +
+			 get_order(amd_iommu_last_bdf * entry_size);
+
+	return 1UL << shift;
+}
+
+/****************************************************************************
+ *
+ * AMD IOMMU MMIO register space handling functions
+ *
+ * These functions are used to program the IOMMU device registers in
+ * MMIO space required for that driver.
+ *
+ ****************************************************************************/
 
+/*
+ * This function set the exclusion range in the IOMMU. DMA accesses to the
+ * exclusion range are passed through untranslated
+ */
 static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
 {
 	u64 start = iommu->exclusion_start & PAGE_MASK;
@@ -137,6 +207,7 @@ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
 			&entry, sizeof(entry));
 }
 
+/* Programs the physical address of the device table into the IOMMU hardware */
 static void __init iommu_set_device_table(struct amd_iommu *iommu)
 {
 	u32 entry;
@@ -149,6 +220,7 @@ static void __init iommu_set_device_table(struct amd_iommu *iommu)
 			&entry, sizeof(entry));
 }
 
+/* Generic functions to enable/disable certain features of the IOMMU. */
 static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
 {
 	u32 ctrl;
@@ -167,6 +239,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
 }
 
+/* Function to enable the hardware */
 void __init iommu_enable(struct amd_iommu *iommu)
 {
 	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at ");
@@ -176,6 +249,10 @@ void __init iommu_enable(struct amd_iommu *iommu)
 	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
 }
 
+/*
+ * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in
+ * the system has one.
+ */
 static u8 * __init iommu_map_mmio_space(u64 address)
 {
 	u8 *ret;
@@ -199,16 +276,33 @@ static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu)
 	release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH);
 }
 
+/****************************************************************************
+ *
+ * The functions below belong to the first pass of AMD IOMMU ACPI table
+ * parsing. In this pass we try to find out the highest device id this
+ * code has to handle. Upon this information the size of the shared data
+ * structures is determined later.
+ *
+ ****************************************************************************/
+
+/*
+ * This function reads the last device id the IOMMU has to handle from the PCI
+ * capability header for this IOMMU
+ */
 static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr)
 {
 	u32 cap;
 
 	cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
-	UPDATE_LAST_BDF(DEVID(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
+	update_last_devid(calc_devid(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
 
 	return 0;
 }
 
+/*
+ * After reading the highest device id from the IOMMU PCI capability header
+ * this function looks if there is a higher device id defined in the ACPI table
+ */
 static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
 {
 	u8 *p = (void *)h, *end = (void *)h;
@@ -229,7 +323,8 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
 		case IVHD_DEV_RANGE_END:
 		case IVHD_DEV_ALIAS:
 		case IVHD_DEV_EXT_SELECT:
-			UPDATE_LAST_BDF(dev->devid);
+			/* all the above subfield types refer to device ids */
+			update_last_devid(dev->devid);
 			break;
 		default:
 			break;
@@ -242,6 +337,11 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
 	return 0;
 }
 
+/*
+ * Iterate over all IVHD entries in the ACPI table and find the highest device
+ * id which we need to handle. This is the first of three functions which parse
+ * the ACPI table. So we check the checksum here.
+ */
 static int __init find_last_devid_acpi(struct acpi_table_header *table)
 {
 	int i;
@@ -277,19 +377,31 @@ static int __init find_last_devid_acpi(struct acpi_table_header *table)
 	return 0;
 }
 
+/****************************************************************************
+ *
+ * The following functions belong the the code path which parses the ACPI table
+ * the second time. In this ACPI parsing iteration we allocate IOMMU specific
+ * data structures, initialize the device/alias/rlookup table and also
+ * basically initialize the hardware.
+ *
+ ****************************************************************************/
+
+/*
+ * Allocates the command buffer. This buffer is per AMD IOMMU. We can
+ * write commands to that buffer later and the IOMMU will execute them
+ * asynchronously
+ */
 static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 {
-	u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL,
+	u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 			get_order(CMD_BUFFER_SIZE));
-	u64 entry = 0;
+	u64 entry;
 
 	if (cmd_buf == NULL)
 		return NULL;
 
 	iommu->cmd_buf_size = CMD_BUFFER_SIZE;
 
-	memset(cmd_buf, 0, CMD_BUFFER_SIZE);
-
 	entry = (u64)virt_to_phys(cmd_buf);
 	entry |= MMIO_CMD_SIZE_512;
 	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
@@ -302,11 +414,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 
 static void __init free_command_buffer(struct amd_iommu *iommu)
 {
-	if (iommu->cmd_buf)
-		free_pages((unsigned long)iommu->cmd_buf,
-				get_order(CMD_BUFFER_SIZE));
+	free_pages((unsigned long)iommu->cmd_buf, get_order(CMD_BUFFER_SIZE));
 }
 
+/* sets a specific bit in the device table entry. */
 static void set_dev_entry_bit(u16 devid, u8 bit)
 {
 	int i = (bit >> 5) & 0x07;
@@ -315,7 +426,18 @@ static void set_dev_entry_bit(u16 devid, u8 bit)
 	amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
 }
 
-static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags)
+/* Writes the specific IOMMU for a device into the rlookup table */
+static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
+{
+	amd_iommu_rlookup_table[devid] = iommu;
+}
+
+/*
+ * This function takes the device specific flags read from the ACPI
+ * table and sets up the device table entry with that information
+ */
+static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu,
+					   u16 devid, u32 flags, u32 ext_flags)
 {
 	if (flags & ACPI_DEVFLAG_INITPASS)
 		set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS);
@@ -331,13 +453,14 @@ static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags)
 		set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS);
 	if (flags & ACPI_DEVFLAG_LINT1)
 		set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
-}
 
-static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
-{
-	amd_iommu_rlookup_table[devid] = iommu;
+	set_iommu_for_device(iommu, devid);
 }
 
+/*
+ * Reads the device exclusion range from ACPI and initialize IOMMU with
+ * it
+ */
 static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
 {
 	struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
@@ -346,12 +469,22 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
 		return;
 
 	if (iommu) {
+		/*
+		 * We only can configure exclusion ranges per IOMMU, not
+		 * per device. But we can enable the exclusion range per
+		 * device. This is done here
+		 */
 		set_dev_entry_bit(m->devid, DEV_ENTRY_EX);
 		iommu->exclusion_start = m->range_start;
 		iommu->exclusion_length = m->range_length;
 	}
 }
 
+/*
+ * This function reads some important data from the IOMMU PCI space and
+ * initializes the driver data structure with it. It reads the hardware
+ * capabilities and the first/last device entries
+ */
 static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 {
 	int bus = PCI_BUS(iommu->devid);
@@ -363,10 +496,16 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 	iommu->cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_CAP_HDR_OFFSET);
 
 	range = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
-	iommu->first_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_FD(range));
-	iommu->last_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_LD(range));
+	iommu->first_device = calc_devid(MMIO_GET_BUS(range),
+					 MMIO_GET_FD(range));
+	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
+					MMIO_GET_LD(range));
 }
 
+/*
+ * Takes a pointer to an AMD IOMMU entry in the ACPI table and
+ * initializes the hardware and our data structures with it.
+ */
 static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 					struct ivhd_header *h)
 {
@@ -374,7 +513,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 	u8 *end = p, flags = 0;
 	u16 dev_i, devid = 0, devid_start = 0, devid_to = 0;
 	u32 ext_flags = 0;
-	bool alias = 0;
+	bool alias = false;
 	struct ivhd_entry *e;
 
 	/*
@@ -414,22 +553,23 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 		case IVHD_DEV_ALL:
 			for (dev_i = iommu->first_device;
 					dev_i <= iommu->last_device; ++dev_i)
-				set_dev_entry_from_acpi(dev_i, e->flags, 0);
+				set_dev_entry_from_acpi(iommu, dev_i,
+							e->flags, 0);
 			break;
 		case IVHD_DEV_SELECT:
 			devid = e->devid;
-			set_dev_entry_from_acpi(devid, e->flags, 0);
+			set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
 			break;
 		case IVHD_DEV_SELECT_RANGE_START:
 			devid_start = e->devid;
 			flags = e->flags;
 			ext_flags = 0;
-			alias = 0;
+			alias = false;
 			break;
 		case IVHD_DEV_ALIAS:
 			devid = e->devid;
 			devid_to = e->ext >> 8;
-			set_dev_entry_from_acpi(devid, e->flags, 0);
+			set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
 			amd_iommu_alias_table[devid] = devid_to;
 			break;
 		case IVHD_DEV_ALIAS_RANGE:
@@ -437,24 +577,25 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 			flags = e->flags;
 			devid_to = e->ext >> 8;
 			ext_flags = 0;
-			alias = 1;
+			alias = true;
 			break;
 		case IVHD_DEV_EXT_SELECT:
 			devid = e->devid;
-			set_dev_entry_from_acpi(devid, e->flags, e->ext);
+			set_dev_entry_from_acpi(iommu, devid, e->flags,
+						e->ext);
 			break;
 		case IVHD_DEV_EXT_SELECT_RANGE:
 			devid_start = e->devid;
 			flags = e->flags;
 			ext_flags = e->ext;
-			alias = 0;
+			alias = false;
 			break;
 		case IVHD_DEV_RANGE_END:
 			devid = e->devid;
 			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
 				if (alias)
 					amd_iommu_alias_table[dev_i] = devid_to;
-				set_dev_entry_from_acpi(
+				set_dev_entry_from_acpi(iommu,
 						amd_iommu_alias_table[dev_i],
 						flags, ext_flags);
 			}
@@ -467,6 +608,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 	}
 }
 
+/* Initializes the device->iommu mapping for the driver */
 static int __init init_iommu_devices(struct amd_iommu *iommu)
 {
 	u16 i;
@@ -494,6 +636,11 @@ static void __init free_iommu_all(void)
 	}
 }
 
+/*
+ * This function clues the initialization function for one IOMMU
+ * together and also allocates the command buffer and programs the
+ * hardware. It does NOT enable the IOMMU. This is done afterwards.
+ */
 static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 {
 	spin_lock_init(&iommu->lock);
@@ -521,6 +668,10 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	return 0;
 }
 
+/*
+ * Iterates over all IOMMU entries in the ACPI table, allocates the
+ * IOMMU structure and initializes it with init_iommu_one()
+ */
 static int __init init_iommu_all(struct acpi_table_header *table)
 {
 	u8 *p = (u8 *)table, *end = (u8 *)table;
@@ -528,8 +679,6 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 	struct amd_iommu *iommu;
 	int ret;
 
-	INIT_LIST_HEAD(&amd_iommu_list);
-
 	end += table->length;
 	p += IVRS_HEADER_LENGTH;
 
@@ -555,6 +704,14 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 	return 0;
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the third pass of parsing the ACPI
+ * table. In this last pass the memory mapping requirements are
+ * gathered (like exclusion and unity mapping reanges).
+ *
+ ****************************************************************************/
+
 static void __init free_unity_maps(void)
 {
 	struct unity_map_entry *entry, *next;
@@ -565,6 +722,7 @@ static void __init free_unity_maps(void)
 	}
 }
 
+/* called when we find an exclusion range definition in ACPI */
 static int __init init_exclusion_range(struct ivmd_header *m)
 {
 	int i;
@@ -574,7 +732,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
 		set_device_exclusion_range(m->devid, m);
 		break;
 	case ACPI_IVMD_TYPE_ALL:
-		for (i = 0; i < amd_iommu_last_bdf; ++i)
+		for (i = 0; i <= amd_iommu_last_bdf; ++i)
 			set_device_exclusion_range(i, m);
 		break;
 	case ACPI_IVMD_TYPE_RANGE:
@@ -588,6 +746,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
 	return 0;
 }
 
+/* called for unity map ACPI definition */
 static int __init init_unity_map_range(struct ivmd_header *m)
 {
 	struct unity_map_entry *e = 0;
@@ -619,13 +778,12 @@ static int __init init_unity_map_range(struct ivmd_header *m)
 	return 0;
 }
 
+/* iterates over all memory definitions we find in the ACPI table */
 static int __init init_memory_definitions(struct acpi_table_header *table)
 {
 	u8 *p = (u8 *)table, *end = (u8 *)table;
 	struct ivmd_header *m;
 
-	INIT_LIST_HEAD(&amd_iommu_unity_map);
-
 	end += table->length;
 	p += IVRS_HEADER_LENGTH;
 
@@ -642,6 +800,25 @@ static int __init init_memory_definitions(struct acpi_table_header *table)
 	return 0;
 }
 
+/*
+ * Init the device table to not allow DMA access for devices and
+ * suppress all page faults
+ */
+static void init_device_table(void)
+{
+	u16 devid;
+
+	for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
+		set_dev_entry_bit(devid, DEV_ENTRY_VALID);
+		set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
+		set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT);
+	}
+}
+
+/*
+ * This function finally enables all IOMMUs found in the system after
+ * they have been initialized
+ */
 static void __init enable_iommus(void)
 {
 	struct amd_iommu *iommu;
@@ -678,6 +855,34 @@ static struct sys_device device_amd_iommu = {
 	.cls = &amd_iommu_sysdev_class,
 };
 
+/*
+ * This is the core init function for AMD IOMMU hardware in the system.
+ * This function is called from the generic x86 DMA layer initialization
+ * code.
+ *
+ * This function basically parses the ACPI table for AMD IOMMU (IVRS)
+ * three times:
+ *
+ *	1 pass) Find the highest PCI device id the driver has to handle.
+ *		Upon this information the size of the data structures is
+ *		determined that needs to be allocated.
+ *
+ *	2 pass) Initialize the data structures just allocated with the
+ *		information in the ACPI table about available AMD IOMMUs
+ *		in the system. It also maps the PCI devices in the
+ *		system to specific IOMMUs
+ *
+ *	3 pass) After the basic data structures are allocated and
+ *		initialized we update them with information about memory
+ *		remapping requirements parsed out of the ACPI table in
+ *		this last pass.
+ *
+ * After that the hardware is initialized and ready to go. In the last
+ * step we do some Linux specific things like registering the driver in
+ * the dma_ops interface and initializing the suspend/resume support
+ * functions. Finally it prints some information about AMD IOMMUs and
+ * the driver state and enables the hardware.
+ */
 int __init amd_iommu_init(void)
 {
 	int i, ret = 0;
@@ -699,14 +904,14 @@ int __init amd_iommu_init(void)
 	if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
 		return -ENODEV;
 
-	dev_table_size     = TBL_SIZE(DEV_TABLE_ENTRY_SIZE);
-	alias_table_size   = TBL_SIZE(ALIAS_TABLE_ENTRY_SIZE);
-	rlookup_table_size = TBL_SIZE(RLOOKUP_TABLE_ENTRY_SIZE);
+	dev_table_size     = tbl_size(DEV_TABLE_ENTRY_SIZE);
+	alias_table_size   = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
+	rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
 
 	ret = -ENOMEM;
 
 	/* Device table - directly used by all IOMMUs */
-	amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL,
+	amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 				      get_order(dev_table_size));
 	if (amd_iommu_dev_table == NULL)
 		goto out;
@@ -730,27 +935,26 @@ int __init amd_iommu_init(void)
 	 * Protection Domain table - maps devices to protection domains
 	 * This table has the same size as the rlookup_table
 	 */
-	amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL,
+	amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 				     get_order(rlookup_table_size));
 	if (amd_iommu_pd_table == NULL)
 		goto free;
 
-	amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(GFP_KERNEL,
+	amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
+					    GFP_KERNEL | __GFP_ZERO,
 					    get_order(MAX_DOMAIN_ID/8));
 	if (amd_iommu_pd_alloc_bitmap == NULL)
 		goto free;
 
+	/* init the device table */
+	init_device_table();
+
 	/*
-	 * memory is allocated now; initialize the device table with all zeroes
-	 * and let all alias entries point to itself
+	 * let all alias entries point to itself
 	 */
-	memset(amd_iommu_dev_table, 0, dev_table_size);
-	for (i = 0; i < amd_iommu_last_bdf; ++i)
+	for (i = 0; i <= amd_iommu_last_bdf; ++i)
 		amd_iommu_alias_table[i] = i;
 
-	memset(amd_iommu_pd_table, 0, rlookup_table_size);
-	memset(amd_iommu_pd_alloc_bitmap, 0, MAX_DOMAIN_ID / 8);
-
 	/*
 	 * never allocate domain 0 because its used as the non-allocated and
 	 * error value placeholder
@@ -768,15 +972,15 @@ int __init amd_iommu_init(void)
 	if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
 		goto free;
 
-	ret = amd_iommu_init_dma_ops();
+	ret = sysdev_class_register(&amd_iommu_sysdev_class);
 	if (ret)
 		goto free;
 
-	ret = sysdev_class_register(&amd_iommu_sysdev_class);
+	ret = sysdev_register(&device_amd_iommu);
 	if (ret)
 		goto free;
 
-	ret = sysdev_register(&device_amd_iommu);
+	ret = amd_iommu_init_dma_ops();
 	if (ret)
 		goto free;
 
@@ -795,24 +999,19 @@ out:
 	return ret;
 
 free:
-	if (amd_iommu_pd_alloc_bitmap)
-		free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
+	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
 
-	if (amd_iommu_pd_table)
-		free_pages((unsigned long)amd_iommu_pd_table,
-				get_order(rlookup_table_size));
+	free_pages((unsigned long)amd_iommu_pd_table,
+		   get_order(rlookup_table_size));
 
-	if (amd_iommu_rlookup_table)
-		free_pages((unsigned long)amd_iommu_rlookup_table,
-				get_order(rlookup_table_size));
+	free_pages((unsigned long)amd_iommu_rlookup_table,
+		   get_order(rlookup_table_size));
 
-	if (amd_iommu_alias_table)
-		free_pages((unsigned long)amd_iommu_alias_table,
-				get_order(alias_table_size));
+	free_pages((unsigned long)amd_iommu_alias_table,
+		   get_order(alias_table_size));
 
-	if (amd_iommu_dev_table)
-		free_pages((unsigned long)amd_iommu_dev_table,
-				get_order(dev_table_size));
+	free_pages((unsigned long)amd_iommu_dev_table,
+		   get_order(dev_table_size));
 
 	free_iommu_all();
 
@@ -821,6 +1020,13 @@ free:
 	goto out;
 }
 
+/****************************************************************************
+ *
+ * Early detect code. This code runs at IOMMU detection time in the DMA
+ * layer. It just looks if there is an IVRS ACPI table to detect AMD
+ * IOMMUs
+ *
+ ****************************************************************************/
 static int __init early_amd_iommu_detect(struct acpi_table_header *table)
 {
 	return 0;
@@ -828,7 +1034,7 @@ static int __init early_amd_iommu_detect(struct acpi_table_header *table)
 
 void __init amd_iommu_detect(void)
 {
-	if (swiotlb || no_iommu || iommu_detected)
+	if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture))
 		return;
 
 	if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
@@ -841,6 +1047,13 @@ void __init amd_iommu_detect(void)
 	}
 }
 
+/****************************************************************************
+ *
+ * Parsing functions for the AMD IOMMU specific kernel command line
+ * options.
+ *
+ ****************************************************************************/
+
 static int __init parse_amd_iommu_options(char *str)
 {
 	for (; *str; ++str) {
@@ -853,20 +1066,10 @@ static int __init parse_amd_iommu_options(char *str)
 
 static int __init parse_amd_iommu_size_options(char *str)
 {
-	for (; *str; ++str) {
-		if (strcmp(str, "32M") == 0)
-			amd_iommu_aperture_order = 25;
-		if (strcmp(str, "64M") == 0)
-			amd_iommu_aperture_order = 26;
-		if (strcmp(str, "128M") == 0)
-			amd_iommu_aperture_order = 27;
-		if (strcmp(str, "256M") == 0)
-			amd_iommu_aperture_order = 28;
-		if (strcmp(str, "512M") == 0)
-			amd_iommu_aperture_order = 29;
-		if (strcmp(str, "1G") == 0)
-			amd_iommu_aperture_order = 30;
-	}
+	unsigned order = PAGE_SHIFT + get_order(memparse(str, &str));
+
+	if ((order > 24) && (order < 31))
+		amd_iommu_aperture_order = order;
 
 	return 1;
 }
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 9f907806c1a..44e21826db1 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -21,6 +21,7 @@
 #include <linux/suspend.h>
 #include <asm/e820.h>
 #include <asm/io.h>
+#include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index a437d027f20..f88bd0d982b 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -75,7 +75,7 @@ char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
 /*
  * Debug level, exported for io_apic.c
  */
-int apic_verbosity;
+unsigned int apic_verbosity;
 
 int pic_mode;
 
@@ -177,7 +177,7 @@ void __cpuinit enable_NMI_through_LVT0(void)
 	/* Level triggered for 82489DX */
 	if (!lapic_is_integrated())
 		v |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT0, v);
+	apic_write(APIC_LVT0, v);
 }
 
 /**
@@ -212,9 +212,6 @@ int lapic_get_maxlvt(void)
  * this function twice on the boot CPU, once with a bogus timeout
  * value, second time for real. The other (noncalibrating) CPUs
  * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
  */
 static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 {
@@ -229,18 +226,18 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 	if (!irqen)
 		lvtt_value |= APIC_LVT_MASKED;
 
-	apic_write_around(APIC_LVTT, lvtt_value);
+	apic_write(APIC_LVTT, lvtt_value);
 
 	/*
 	 * Divide PICLK by 16
 	 */
 	tmp_value = apic_read(APIC_TDCR);
-	apic_write_around(APIC_TDCR, (tmp_value
-				& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
-				| APIC_TDR_DIV_16);
+	apic_write(APIC_TDCR,
+		   (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+		   APIC_TDR_DIV_16);
 
 	if (!oneshot)
-		apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
+		apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
 }
 
 /*
@@ -249,7 +246,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 static int lapic_next_event(unsigned long delta,
 			    struct clock_event_device *evt)
 {
-	apic_write_around(APIC_TMICT, delta);
+	apic_write(APIC_TMICT, delta);
 	return 0;
 }
 
@@ -278,7 +275,7 @@ static void lapic_timer_setup(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		v = apic_read(APIC_LVTT);
 		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-		apic_write_around(APIC_LVTT, v);
+		apic_write(APIC_LVTT, v);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		/* Nothing to do here */
@@ -372,12 +369,7 @@ static void __init lapic_cal_handler(struct clock_event_device *dev)
 	}
 }
 
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
 {
 	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 	const long pm_100ms = PMTMR_TICKS_PER_SEC/10;
@@ -387,24 +379,6 @@ void __init setup_boot_APIC_clock(void)
 	long delta, deltapm;
 	int pm_referenced = 0;
 
-	/*
-	 * The local apic timer can be disabled via the kernel
-	 * commandline or from the CPU detection code. Register the lapic
-	 * timer as a dummy clock event source on SMP systems, so the
-	 * broadcast mechanism is used. On UP systems simply ignore it.
-	 */
-	if (local_apic_timer_disabled) {
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1) {
-			lapic_clockevent.mult = 1;
-			setup_APIC_timer();
-		}
-		return;
-	}
-
-	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
-		    "calibrating APIC timer ...\n");
-
 	local_irq_disable();
 
 	/* Replace the global interrupt handler */
@@ -489,8 +463,6 @@ void __init setup_boot_APIC_clock(void)
 		    calibration_result / (1000000 / HZ),
 		    calibration_result % (1000000 / HZ));
 
-	local_apic_timer_verify_ok = 1;
-
 	/*
 	 * Do a sanity check on the APIC calibration result
 	 */
@@ -498,12 +470,11 @@ void __init setup_boot_APIC_clock(void)
 		local_irq_enable();
 		printk(KERN_WARNING
 		       "APIC frequency too slow, disabling apic timer\n");
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1)
-			setup_APIC_timer();
-		return;
+		return -1;
 	}
 
+	local_apic_timer_verify_ok = 1;
+
 	/* We trust the pm timer based calibration */
 	if (!pm_referenced) {
 		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
@@ -543,22 +514,55 @@ void __init setup_boot_APIC_clock(void)
 	if (!local_apic_timer_verify_ok) {
 		printk(KERN_WARNING
 		       "APIC timer disabled due to verification failure.\n");
+			return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Setup the boot APIC
+ *
+ * Calibrate and verify the result.
+ */
+void __init setup_boot_APIC_clock(void)
+{
+	/*
+	 * The local apic timer can be disabled via the kernel
+	 * commandline or from the CPU detection code. Register the lapic
+	 * timer as a dummy clock event source on SMP systems, so the
+	 * broadcast mechanism is used. On UP systems simply ignore it.
+	 */
+	if (local_apic_timer_disabled) {
 		/* No broadcast on UP ! */
-		if (num_possible_cpus() == 1)
-			return;
-	} else {
-		/*
-		 * If nmi_watchdog is set to IO_APIC, we need the
-		 * PIT/HPET going.  Otherwise register lapic as a dummy
-		 * device.
-		 */
-		if (nmi_watchdog != NMI_IO_APIC)
-			lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-		else
-			printk(KERN_WARNING "APIC timer registered as dummy,"
-				" due to nmi_watchdog=%d!\n", nmi_watchdog);
+		if (num_possible_cpus() > 1) {
+			lapic_clockevent.mult = 1;
+			setup_APIC_timer();
+		}
+		return;
 	}
 
+	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+		    "calibrating APIC timer ...\n");
+
+	if (calibrate_APIC_clock()) {
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1)
+			setup_APIC_timer();
+		return;
+	}
+
+	/*
+	 * If nmi_watchdog is set to IO_APIC, we need the
+	 * PIT/HPET going.  Otherwise register lapic as a dummy
+	 * device.
+	 */
+	if (nmi_watchdog != NMI_IO_APIC)
+		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	else
+		printk(KERN_WARNING "APIC timer registered as dummy,"
+			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
 }
@@ -693,44 +697,44 @@ void clear_local_APIC(void)
 	 */
 	if (maxlvt >= 3) {
 		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
-		apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
 	}
 	/*
 	 * Careful: we have to set masks only first to deassert
 	 * any level-triggered sources.
 	 */
 	v = apic_read(APIC_LVTT);
-	apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
 	v = apic_read(APIC_LVT1);
-	apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
 	if (maxlvt >= 4) {
 		v = apic_read(APIC_LVTPC);
-		apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
 	}
 
 	/* lets not touch this if we didn't frob it */
 #ifdef CONFIG_X86_MCE_P4THERMAL
 	if (maxlvt >= 5) {
 		v = apic_read(APIC_LVTTHMR);
-		apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
 	}
 #endif
 	/*
 	 * Clean APIC state for other OSs:
 	 */
-	apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
-	apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
+	apic_write(APIC_LVTT, APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED);
+	apic_write(APIC_LVT1, APIC_LVT_MASKED);
 	if (maxlvt >= 3)
-		apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
+		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
 	if (maxlvt >= 4)
-		apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
 	if (maxlvt >= 5)
-		apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
+		apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
 #endif
 	/* Integrated APIC (!82489DX) ? */
 	if (lapic_is_integrated()) {
@@ -756,7 +760,7 @@ void disable_local_APIC(void)
 	 */
 	value = apic_read(APIC_SPIV);
 	value &= ~APIC_SPIV_APIC_ENABLED;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * When LAPIC was disabled by the BIOS and enabled by the kernel,
@@ -865,8 +869,8 @@ void __init sync_Arb_IDs(void)
 	apic_wait_icr_idle();
 
 	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-	apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
-				| APIC_DM_INIT);
+	apic_write(APIC_ICR,
+		   APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
 }
 
 /*
@@ -902,16 +906,16 @@ void __init init_bsp_APIC(void)
 	else
 		value |= APIC_SPIV_FOCUS_DISABLED;
 	value |= SPURIOUS_APIC_VECTOR;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * Set up the virtual wire mode.
 	 */
-	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
 	value = APIC_DM_NMI;
 	if (!lapic_is_integrated())		/* 82489DX */
 		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT1, value);
+	apic_write(APIC_LVT1, value);
 }
 
 static void __cpuinit lapic_setup_esr(void)
@@ -926,7 +930,7 @@ static void __cpuinit lapic_setup_esr(void)
 
 		/* enables sending errors */
 		value = ERROR_APIC_VECTOR;
-		apic_write_around(APIC_LVTERR, value);
+		apic_write(APIC_LVTERR, value);
 		/*
 		 * spec says clear errors after enabling vector.
 		 */
@@ -989,7 +993,7 @@ void __cpuinit setup_local_APIC(void)
 	 */
 	value = apic_read(APIC_TASKPRI);
 	value &= ~APIC_TPRI_MASK;
-	apic_write_around(APIC_TASKPRI, value);
+	apic_write(APIC_TASKPRI, value);
 
 	/*
 	 * After a crash, we no longer service the interrupts and a pending
@@ -1047,7 +1051,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Set spurious IRQ vector
 	 */
 	value |= SPURIOUS_APIC_VECTOR;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * Set up LVT0, LVT1:
@@ -1069,7 +1073,7 @@ void __cpuinit setup_local_APIC(void)
 		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
 				smp_processor_id());
 	}
-	apic_write_around(APIC_LVT0, value);
+	apic_write(APIC_LVT0, value);
 
 	/*
 	 * only the BP should see the LINT1 NMI signal, obviously.
@@ -1080,7 +1084,7 @@ void __cpuinit setup_local_APIC(void)
 		value = APIC_DM_NMI | APIC_LVT_MASKED;
 	if (!integrated)		/* 82489DX */
 		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT1, value);
+	apic_write(APIC_LVT1, value);
 }
 
 void __cpuinit end_local_APIC_setup(void)
@@ -1091,7 +1095,7 @@ void __cpuinit end_local_APIC_setup(void)
 	/* Disable the local apic timer */
 	value = apic_read(APIC_LVTT);
 	value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-	apic_write_around(APIC_LVTT, value);
+	apic_write(APIC_LVTT, value);
 
 	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
@@ -1214,9 +1218,6 @@ int apic_version[MAX_APICS];
 
 int __init APIC_init_uniprocessor(void)
 {
-	if (disable_apic)
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-
 	if (!smp_found_config && !cpu_has_apic)
 		return -1;
 
@@ -1419,7 +1420,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 		value &= ~APIC_VECTOR_MASK;
 		value |= APIC_SPIV_APIC_ENABLED;
 		value |= 0xf;
-		apic_write_around(APIC_SPIV, value);
+		apic_write(APIC_SPIV, value);
 
 		if (!virt_wire_setup) {
 			/*
@@ -1432,10 +1433,10 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 				APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
 			value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
 			value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-			apic_write_around(APIC_LVT0, value);
+			apic_write(APIC_LVT0, value);
 		} else {
 			/* Disable LVT0 */
-			apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+			apic_write(APIC_LVT0, APIC_LVT_MASKED);
 		}
 
 		/*
@@ -1449,12 +1450,10 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
 		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
 		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-		apic_write_around(APIC_LVT1, value);
+		apic_write(APIC_LVT1, value);
 	}
 }
 
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
-
 void __cpuinit generic_processor_info(int apicid, int version)
 {
 	int cpu;
@@ -1481,12 +1480,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		return;
 	}
 
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus);
-		return;
-	}
-
 	num_processors++;
 	cpus_complement(tmp_map, cpu_present_map);
 	cpu = first_cpu(tmp_map);
@@ -1700,7 +1693,7 @@ early_param("lapic", parse_lapic);
 static int __init parse_nolapic(char *arg)
 {
 	disable_apic = 1;
-	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
 	return 0;
 }
 early_param("nolapic", parse_nolapic);
@@ -1719,15 +1712,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg)
 }
 early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
 
-static int __init apic_set_verbosity(char *str)
+static int __init apic_set_verbosity(char *arg)
 {
-	if (strcmp("debug", str) == 0)
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp(arg, "debug") == 0)
 		apic_verbosity = APIC_DEBUG;
-	else if (strcmp("verbose", str) == 0)
+	else if (strcmp(arg, "verbose") == 0)
 		apic_verbosity = APIC_VERBOSE;
-	return 1;
+
+	return 0;
 }
-__setup("apic=", apic_set_verbosity);
+early_param("apic", apic_set_verbosity);
 
 static int __init lapic_insert_resource(void)
 {
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 1e3d32e27c1..446c062e831 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -54,7 +54,7 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
 /*
  * Debug level, exported for io_apic.c
  */
-int apic_verbosity;
+unsigned int apic_verbosity;
 
 /* Have we found an MP table */
 int smp_found_config;
@@ -90,7 +90,6 @@ static unsigned long apic_phys;
 
 unsigned long mp_lapic_addr;
 
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
 /*
  * Get the LAPIC version
  */
@@ -314,7 +313,7 @@ static void setup_APIC_timer(void)
 
 #define TICK_COUNT 100000000
 
-static void __init calibrate_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
 {
 	unsigned apic, apic_start;
 	unsigned long tsc, tsc_start;
@@ -368,6 +367,17 @@ static void __init calibrate_APIC_clock(void)
 		clockevent_delta2ns(0xF, &lapic_clockevent);
 
 	calibration_result = result / HZ;
+
+	/*
+	 * Do a sanity check on the APIC calibration result
+	 */
+	if (calibration_result < (1000000 / HZ)) {
+		printk(KERN_WARNING
+			"APIC frequency too slow, disabling apic timer\n");
+		return -1;
+	}
+
+	return 0;
 }
 
 /*
@@ -394,14 +404,7 @@ void __init setup_boot_APIC_clock(void)
 	}
 
 	printk(KERN_INFO "Using local APIC timer interrupts.\n");
-	calibrate_APIC_clock();
-
-	/*
-	 * Do a sanity check on the APIC calibration result
-	 */
-	if (calibration_result < (1000000 / HZ)) {
-		printk(KERN_WARNING
-		       "APIC frequency too slow, disabling apic timer\n");
+	if (calibrate_APIC_clock()) {
 		/* No broadcast on UP ! */
 		if (num_possible_cpus() > 1)
 			setup_APIC_timer();
@@ -1058,12 +1061,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		return;
 	}
 
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-		       " Processor ignored.\n", maxcpus);
-		return;
-	}
-
 	num_processors++;
 	cpus_complement(tmp_map, cpu_present_map);
 	cpu = first_cpu(tmp_map);
@@ -1337,7 +1334,7 @@ early_param("apic", apic_set_verbosity);
 static __init int setup_disableapic(char *str)
 {
 	disable_apic = 1;
-	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
 	return 0;
 }
 early_param("disableapic", setup_disableapic);
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index bf9b441331e..732d1f4e10e 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -219,7 +219,6 @@
 #include <linux/time.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/capability.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -235,6 +234,7 @@
 #include <asm/uaccess.h>
 #include <asm/desc.h>
 #include <asm/i8253.h>
+#include <asm/olpc.h>
 #include <asm/paravirt.h>
 #include <asm/reboot.h>
 
@@ -2218,7 +2218,7 @@ static int __init apm_init(void)
 
 	dmi_check_system(apm_dmi_table);
 
-	if (apm_info.bios.version == 0 || paravirt_enabled()) {
+	if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) {
 		printk(KERN_INFO "apm: BIOS not found.\n");
 		return -ENODEV;
 	}
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index bacf5deeec2..aa89387006f 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -18,6 +18,8 @@
 #include <asm/ia32.h>
 #include <asm/bootparam.h>
 
+#include <xen/interface/xen.h>
+
 #define __NO_STUBS 1
 #undef __SYSCALL
 #undef _ASM_X86_64_UNISTD_H_
@@ -131,5 +133,14 @@ int main(void)
 	OFFSET(BP_loadflags, boot_params, hdr.loadflags);
 	OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
 	OFFSET(BP_version, boot_params, hdr.version);
+
+	BLANK();
+	DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+#ifdef CONFIG_XEN
+	BLANK();
+	OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask);
+	OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
+#undef ENTRY
+#endif
 	return 0;
 }
diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
new file mode 100644
index 00000000000..c639bd55391
--- /dev/null
+++ b/arch/x86/kernel/bios_uv.c
@@ -0,0 +1,48 @@
+/*
+ * BIOS run time interface routines.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <asm/uv/bios.h>
+
+const char *
+x86_bios_strerror(long status)
+{
+	const char *str;
+	switch (status) {
+	case  0: str = "Call completed without error"; break;
+	case -1: str = "Not implemented"; break;
+	case -2: str = "Invalid argument"; break;
+	case -3: str = "Call completed with error"; break;
+	default: str = "Unknown BIOS status code"; break;
+	}
+	return str;
+}
+
+long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info)
+{
+	struct uv_bios_retval isrv;
+
+	BIOS_CALL(isrv, BIOS_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
+	*ticks_per_second = isrv.v0;
+	*drift_info = isrv.v1;
+	return isrv.status;
+}
+EXPORT_SYMBOL_GPL(x86_bios_freq_base);
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 84a8220a607..a6ef672adbb 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -56,9 +56,22 @@ void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
-		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+		/*
+		 * There is a known erratum on Pentium III and Core Solo
+		 * and Core Duo CPUs.
+		 * " Page with PAT set to WC while associated MTRR is UC
+		 *   may consolidate to UC "
+		 * Because of this erratum, it is better to stick with
+		 * setting WC in MTRR rather than using PAT on these CPUs.
+		 *
+		 * Enable PAT WC only on P4, Core 2 or later CPUs.
+		 */
+		if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15))
 			return;
-		break;
+
+		pat_disable("PAT WC disabled due to known CPU erratum.");
+		return;
+
 	case X86_VENDOR_AMD:
 	case X86_VENDOR_CENTAUR:
 	case X86_VENDOR_TRANSMETA:
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 81a07ca65d4..18514ed2610 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -24,8 +24,6 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
-int force_mwait __cpuinitdata;
-
 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 {
 	if (cpuid_eax(0x80000000) >= 0x80000007) {
@@ -33,6 +31,11 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 		if (c->x86_power & (1<<8))
 			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	}
+
+	/*  Set MTRR capability flag if appropriate */
+	if (c->x86_model == 13 || c->x86_model == 9 ||
+	   (c->x86_model == 8 && c->x86_mask >= 8))
+		set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
@@ -168,10 +171,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 						mbytes);
 				}
 
-				/*  Set MTRR capability flag if appropriate */
-				if (c->x86_model == 13 || c->x86_model == 9 ||
-				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 				break;
 			}
 
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
index 7c36fb8a28d..d1692b2a41f 100644
--- a/arch/x86/kernel/cpu/amd_64.c
+++ b/arch/x86/kernel/cpu/amd_64.c
@@ -115,6 +115,8 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
 	if (c->x86_power & (1<<8))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 1b1c56bb338..c8e315f1aa8 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -50,6 +50,8 @@ static double __initdata y = 3145727.0;
  */
 static void __init check_fpu(void)
 {
+	s32 fdiv_bug;
+
 	if (!boot_cpu_data.hard_math) {
 #ifndef CONFIG_MATH_EMULATION
 		printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
@@ -74,8 +76,10 @@ static void __init check_fpu(void)
 		"fistpl %0\n\t"
 		"fwait\n\t"
 		"fninit"
-		: "=m" (*&boot_cpu_data.fdiv_bug)
+		: "=m" (*&fdiv_bug)
 		: "m" (*&x), "m" (*&y));
+
+	boot_cpu_data.fdiv_bug = fdiv_bug;
 	if (boot_cpu_data.fdiv_bug)
 		printk("Hmm, FPU with FDIV bug.\n");
 }
@@ -131,13 +135,7 @@ static void __init check_popad(void)
  *   (for due to lack of "invlpg" and working WP on a i386)
  * - In order to run on anything without a TSC, we need to be
  *   compiled for a i486.
- * - In order to support the local APIC on a buggy Pentium machine,
- *   we need to be compiled with CONFIG_X86_GOOD_APIC disabled,
- *   which happens implicitly if compiled for a Pentium or lower
- *   (unless an advanced selection of CPU features is used) as an
- *   otherwise config implies a properly working local APIC without
- *   the need to do extra reads from the APIC.
-*/
+ */
 
 static void __init check_config(void)
 {
@@ -151,21 +149,6 @@ static void __init check_config(void)
 	if (boot_cpu_data.x86 == 3)
 		panic("Kernel requires i486+ for 'invlpg' and other features");
 #endif
-
-/*
- * If we were told we had a good local APIC, check for buggy Pentia,
- * i.e. all B steppings and the C2 stepping of P54C when using their
- * integrated APIC (see 11AP erratum in "Pentium Processor
- * Specification Update").
- */
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC)
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL
-	    && cpu_has_apic
-	    && boot_cpu_data.x86 == 5
-	    && boot_cpu_data.x86_model == 2
-	    && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11))
-		panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!");
-#endif
 }
 
 
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index e0f45edd6a5..a0534c04d38 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -314,6 +314,16 @@ enum {
 		EAMD3D		= 1<<20,
 };
 
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	switch (c->x86) {
+	case 5:
+		/* Emulate MTRRs using Centaur's MCR. */
+		set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+		break;
+	}
+}
+
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
 
@@ -462,6 +472,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Centaur",
 	.c_ident	= { "CentaurHauls" },
+	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
 	.c_size_cache	= centaur_size_cache,
 };
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 80ab20d4fa3..4e456bd955b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -13,6 +13,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
@@ -334,11 +335,24 @@ static void __init early_cpu_detect(void)
 
 	get_cpu_vendor(c, 1);
 
+	early_get_cap(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
+}
 
-	early_get_cap(c);
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6; unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  In the latter case it doesn't even *fail*
+ * reliably, so probing for it doesn't even work.  Disable it completely
+ * unless we can find a reliable way to detect all the broken cases.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
 }
 
 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
@@ -395,8 +409,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 		}
 
 		init_scattered_cpuid_features(c);
+		detect_nopl(c);
 	}
-
 }
 
 static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
index 7b8cc72feb4..a11f5d4477c 100644
--- a/arch/x86/kernel/cpu/common_64.c
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -7,19 +7,18 @@
 #include <linux/module.h>
 #include <linux/kgdb.h>
 #include <linux/topology.h>
-#include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/smp.h>
-#include <linux/module.h>
 #include <linux/percpu.h>
-#include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/msr.h>
 #include <asm/io.h>
+#include <asm/linkage.h>
 #include <asm/mmu_context.h>
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #include <asm/numa.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
@@ -217,6 +216,39 @@ static void __init early_cpu_support_print(void)
 	}
 }
 
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
+	}
+}
+
 static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
 
 void __init early_cpu_init(void)
@@ -305,7 +337,6 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 			c->x86_capability[2] = cpuid_edx(0x80860001);
 	}
 
-	c->extended_cpuid_level = cpuid_eax(0x80000000);
 	if (c->extended_cpuid_level >= 0x80000007)
 		c->x86_power = cpuid_edx(0x80000007);
 
@@ -316,18 +347,13 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 		c->x86_phys_bits = eax & 0xff;
 	}
 
-	/* Assume all 64-bit CPUs support 32-bit syscall */
-	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
+	detect_nopl(c);
 
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
 
 	validate_pat_support(c);
-
-	/* early_param could clear that, but recall get it set again */
-	if (disable_apic)
-		clear_cpu_cap(c, X86_FEATURE_APIC);
 }
 
 /*
@@ -503,22 +529,24 @@ void pda_init(int cpu)
 		/* others are initialized in smpboot.c */
 		pda->pcurrent = &init_task;
 		pda->irqstackptr = boot_cpu_stack;
+		pda->irqstackptr += IRQSTACKSIZE - 64;
 	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu);
+		if (!pda->irqstackptr) {
+			pda->irqstackptr = (char *)
+				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+			if (!pda->irqstackptr)
+				panic("cannot allocate irqstack for cpu %d",
+				      cpu);
+			pda->irqstackptr += IRQSTACKSIZE - 64;
+		}
 
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
 			pda->nodenumber = cpu_to_node(cpu);
 	}
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
 }
 
 char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
-			   DEBUG_STKSZ]
-__attribute__((section(".bss.page_aligned")));
+			   DEBUG_STKSZ] __page_aligned_bss;
 
 extern asmlinkage void ignore_sysret(void);
 
@@ -612,19 +640,22 @@ void __cpuinit cpu_init(void)
 	/*
 	 * set up and load the per-CPU TSS
 	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+	if (!orig_ist->ist[0]) {
 		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
 		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu);
+		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+			if (cpu) {
+				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+				if (!estacks)
+					panic("Cannot allocate exception "
+					      "stack %ld %d\n", v, cpu);
+			}
+			estacks += PAGE_SIZE << order[v];
+			orig_ist->ist[v] = t->x86_tss.ist[v] =
+					(unsigned long)estacks;
 		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
 	}
 
 	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index cb7a5715596..efae3b22a0f 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -235,9 +235,9 @@ config X86_LONGHAUL
 	  If in doubt, say N.
 
 config X86_E_POWERSAVER
-	tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
+	tristate "VIA C7 Enhanced PowerSaver"
 	select CPU_FREQ_TABLE
-	depends on X86_32 && EXPERIMENTAL
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for VIA C7 processors.
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index b0c8208df9f..dd097b83583 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -202,7 +202,7 @@ static void drv_write(struct drv_cmd *cmd)
 	cpumask_t saved_mask = current->cpus_allowed;
 	unsigned int i;
 
-	for_each_cpu_mask(i, cmd->mask) {
+	for_each_cpu_mask_nr(i, cmd->mask) {
 		set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
 		do_drv_write(cmd);
 	}
@@ -451,7 +451,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
-	for_each_cpu_mask(i, cmd.mask) {
+	for_each_cpu_mask_nr(i, cmd.mask) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -466,7 +466,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	for_each_cpu_mask(i, cmd.mask) {
+	for_each_cpu_mask_nr(i, cmd.mask) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index 94619c22f56..e4a4bf870e9 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -44,7 +44,7 @@ struct s_elan_multiplier {
  * It is important that the frequencies
  * are listed in ascending order here!
  */
-struct s_elan_multiplier elan_multiplier[] = {
+static struct s_elan_multiplier elan_multiplier[] = {
 	{1000,	0x02,	0x18},
 	{2000,	0x02,	0x10},
 	{4000,	0x02,	0x08},
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 199e4e05e5d..f1685fb91fb 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -122,7 +122,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 		return 0;
 
 	/* notifiers */
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -130,11 +130,11 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
 	 */
-	for_each_cpu_mask(i, policy->cpus)
+	for_each_cpu_mask_nr(i, policy->cpus)
 		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
 
 	/* notifiers */
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
index f8a63b3664e..35fb4eaf6e1 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
@@ -1,5 +1,4 @@
 /*
- *  $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $
  *  (C) 2003 Dave Jones.
  *
  *  Licensed under the terms of the GNU GPL License version 2.
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 206791eb46e..84bb395038d 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -66,7 +66,6 @@ static u32 find_freq_from_fid(u32 fid)
 	return 800 + (fid * 100);
 }
 
-
 /* Return a frequency in KHz, given an input fid */
 static u32 find_khz_freq_from_fid(u32 fid)
 {
@@ -78,7 +77,6 @@ static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 p
 	return data[pstate].frequency;
 }
 
-
 /* Return the vco fid for an input fid
  *
  * Each "low" fid has corresponding "high" fid, and you can get to "low" fids
@@ -166,7 +164,6 @@ static void fidvid_msr_init(void)
 	wrmsr(MSR_FIDVID_CTL, lo, hi);
 }
 
-
 /* write the new fid value along with the other control fields to the msr */
 static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 {
@@ -966,7 +963,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 	freqs.old = find_khz_freq_from_fid(data->currfid);
 	freqs.new = find_khz_freq_from_fid(fid);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -974,7 +971,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 	res = transition_fid_vid(data, fid, vid);
 	freqs.new = find_khz_freq_from_fid(data->currfid);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -997,7 +994,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -1005,7 +1002,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	res = transition_pstate(data, pstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 908dd347c67..15e13c01cc3 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -28,7 +28,8 @@
 #define PFX		"speedstep-centrino: "
 #define MAINTAINER	"cpufreq@lists.linux.org.uk"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+#define dprintk(msg...) \
+	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
 
 #define INTEL_MSR_RANGE	(0xffff)
 
@@ -66,11 +67,12 @@ struct cpu_model
 
 	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
 };
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x);
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x);
 
 /* Operating points for current CPU */
-static struct cpu_model *centrino_model[NR_CPUS];
-static const struct cpu_id *centrino_cpu[NR_CPUS];
+static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
+static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
 
 static struct cpufreq_driver centrino_driver;
 
@@ -255,7 +257,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 		return -ENOENT;
 	}
 
-	centrino_model[policy->cpu] = model;
+	per_cpu(centrino_model, policy->cpu) = model;
 
 	dprintk("found \"%s\": max frequency: %dkHz\n",
 	       model->model_name, model->max_freq);
@@ -264,10 +266,14 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 }
 
 #else
-static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; }
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	return -ENODEV;
+}
 #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
 
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x)
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x)
 {
 	if ((c->x86 == x->x86) &&
 	    (c->x86_model == x->x86_model) &&
@@ -286,23 +292,28 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
 	 * for centrino, as some DSDTs are buggy.
 	 * Ideally, this can be done using the acpi_data structure.
 	 */
-	if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) ||
-	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) ||
-	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) {
+	if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
 		msr = (msr >> 8) & 0xff;
 		return msr * 100000;
 	}
 
-	if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points))
+	if ((!per_cpu(centrino_model, cpu)) ||
+	    (!per_cpu(centrino_model, cpu)->op_points))
 		return 0;
 
 	msr &= 0xffff;
-	for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) {
-		if (msr == centrino_model[cpu]->op_points[i].index)
-			return centrino_model[cpu]->op_points[i].frequency;
+	for (i = 0;
+		per_cpu(centrino_model, cpu)->op_points[i].frequency
+							!= CPUFREQ_TABLE_END;
+	     i++) {
+		if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
+			return per_cpu(centrino_model, cpu)->
+							op_points[i].frequency;
 	}
 	if (failsafe)
-		return centrino_model[cpu]->op_points[i-1].frequency;
+		return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
 	else
 		return 0;
 }
@@ -347,7 +358,8 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 	int i;
 
 	/* Only Intel makes Enhanced Speedstep-capable CPUs */
-	if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST))
+	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+	    !cpu_has(cpu, X86_FEATURE_EST))
 		return -ENODEV;
 
 	if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
@@ -361,9 +373,9 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 			break;
 
 	if (i != N_IDS)
-		centrino_cpu[policy->cpu] = &cpu_ids[i];
+		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
 
-	if (!centrino_cpu[policy->cpu]) {
+	if (!per_cpu(centrino_cpu, policy->cpu)) {
 		dprintk("found unsupported CPU with "
 		"Enhanced SpeedStep: send /proc/cpuinfo to "
 		MAINTAINER "\n");
@@ -386,23 +398,26 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 		/* check to see if it stuck */
 		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 		if (!(l & (1<<16))) {
-			printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n");
+			printk(KERN_INFO PFX
+				"couldn't enable Enhanced SpeedStep\n");
 			return -ENODEV;
 		}
 	}
 
 	freq = get_cur_freq(policy->cpu);
-
-	policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
+	policy->cpuinfo.transition_latency = 10000;
+						/* 10uS transition latency */
 	policy->cur = freq;
 
 	dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
 
-	ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points);
+	ret = cpufreq_frequency_table_cpuinfo(policy,
+		per_cpu(centrino_model, policy->cpu)->op_points);
 	if (ret)
 		return (ret);
 
-	cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu);
+	cpufreq_frequency_table_get_attr(
+		per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
 
 	return 0;
 }
@@ -411,12 +426,12 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
 
-	if (!centrino_model[cpu])
+	if (!per_cpu(centrino_model, cpu))
 		return -ENODEV;
 
 	cpufreq_frequency_table_put_attr(cpu);
 
-	centrino_model[cpu] = NULL;
+	per_cpu(centrino_model, cpu) = NULL;
 
 	return 0;
 }
@@ -430,17 +445,26 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
  */
 static int centrino_verify (struct cpufreq_policy *policy)
 {
-	return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points);
+	return cpufreq_frequency_table_verify(policy,
+			per_cpu(centrino_model, policy->cpu)->op_points);
 }
 
 /**
  * centrino_setpolicy - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
+struct allmasks {
+	cpumask_t		online_policy_cpus;
+	cpumask_t		saved_mask;
+	cpumask_t		set_mask;
+	cpumask_t		covered_cpus;
+};
+
 static int centrino_target (struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
@@ -448,48 +472,55 @@ static int centrino_target (struct cpufreq_policy *policy,
 	unsigned int    newstate = 0;
 	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
 	struct cpufreq_freqs	freqs;
-	cpumask_t		online_policy_cpus;
-	cpumask_t		saved_mask;
-	cpumask_t		set_mask;
-	cpumask_t		covered_cpus;
 	int			retval = 0;
 	unsigned int		j, k, first_cpu, tmp;
-
-	if (unlikely(centrino_model[cpu] == NULL))
-		return -ENODEV;
+	CPUMASK_ALLOC(allmasks);
+	CPUMASK_PTR(online_policy_cpus, allmasks);
+	CPUMASK_PTR(saved_mask, allmasks);
+	CPUMASK_PTR(set_mask, allmasks);
+	CPUMASK_PTR(covered_cpus, allmasks);
+
+	if (unlikely(allmasks == NULL))
+		return -ENOMEM;
+
+	if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
+		retval = -ENODEV;
+		goto out;
+	}
 
 	if (unlikely(cpufreq_frequency_table_target(policy,
-			centrino_model[cpu]->op_points,
+			per_cpu(centrino_model, cpu)->op_points,
 			target_freq,
 			relation,
 			&newstate))) {
-		return -EINVAL;
+		retval = -EINVAL;
+		goto out;
 	}
 
 #ifdef CONFIG_HOTPLUG_CPU
 	/* cpufreq holds the hotplug lock, so we are safe from here on */
-	cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
+	cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus);
 #else
-	online_policy_cpus = policy->cpus;
+	*online_policy_cpus = policy->cpus;
 #endif
 
-	saved_mask = current->cpus_allowed;
+	*saved_mask = current->cpus_allowed;
 	first_cpu = 1;
-	cpus_clear(covered_cpus);
-	for_each_cpu_mask(j, online_policy_cpus) {
+	cpus_clear(*covered_cpus);
+	for_each_cpu_mask_nr(j, *online_policy_cpus) {
 		/*
 		 * Support for SMP systems.
 		 * Make sure we are running on CPU that wants to change freq
 		 */
-		cpus_clear(set_mask);
+		cpus_clear(*set_mask);
 		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			cpus_or(set_mask, set_mask, online_policy_cpus);
+			cpus_or(*set_mask, *set_mask, *online_policy_cpus);
 		else
-			cpu_set(j, set_mask);
+			cpu_set(j, *set_mask);
 
-		set_cpus_allowed_ptr(current, &set_mask);
+		set_cpus_allowed_ptr(current, set_mask);
 		preempt_disable();
-		if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
+		if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) {
 			dprintk("couldn't limit to CPUs in this domain\n");
 			retval = -EAGAIN;
 			if (first_cpu) {
@@ -500,7 +531,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		msr = centrino_model[cpu]->op_points[newstate].index;
+		msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
 
 		if (first_cpu) {
 			rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
@@ -517,7 +548,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
 				target_freq, freqs.old, freqs.new, msr);
 
-			for_each_cpu_mask(k, online_policy_cpus) {
+			for_each_cpu_mask_nr(k, *online_policy_cpus) {
 				freqs.cpu = k;
 				cpufreq_notify_transition(&freqs,
 					CPUFREQ_PRECHANGE);
@@ -536,11 +567,11 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		cpu_set(j, covered_cpus);
+		cpu_set(j, *covered_cpus);
 		preempt_enable();
 	}
 
-	for_each_cpu_mask(k, online_policy_cpus) {
+	for_each_cpu_mask_nr(k, *online_policy_cpus) {
 		freqs.cpu = k;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -553,30 +584,32 @@ static int centrino_target (struct cpufreq_policy *policy,
 		 * Best effort undo..
 		 */
 
-		if (!cpus_empty(covered_cpus)) {
-			for_each_cpu_mask(j, covered_cpus) {
+		if (!cpus_empty(*covered_cpus))
+			for_each_cpu_mask_nr(j, *covered_cpus) {
 				set_cpus_allowed_ptr(current,
 						     &cpumask_of_cpu(j));
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
 			}
-		}
 
 		tmp = freqs.new;
 		freqs.new = freqs.old;
 		freqs.old = tmp;
-		for_each_cpu_mask(j, online_policy_cpus) {
+		for_each_cpu_mask_nr(j, *online_policy_cpus) {
 			freqs.cpu = j;
 			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 		}
 	}
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return 0;
+	set_cpus_allowed_ptr(current, saved_mask);
+	retval = 0;
+	goto out;
 
 migrate_end:
 	preempt_enable();
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return 0;
+	set_cpus_allowed_ptr(current, saved_mask);
+out:
+	CPUMASK_FREE(allmasks);
+	return retval;
 }
 
 static struct freq_attr* centrino_attr[] = {
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 1b50244b1fd..191f7263c61 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -279,7 +279,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 
 	cpus_allowed = current->cpus_allowed;
 
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -292,7 +292,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	/* allow to be run on all CPUs */
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 3fd7a67bb06..898a5a2002e 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -15,13 +15,11 @@
 /*
  * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
  */
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 {
 	unsigned char ccr2, ccr3;
-	unsigned long flags;
 
 	/* we test for DEVID by checking whether CCR3 is writable */
-	local_irq_save(flags);
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, ccr3 ^ 0x80);
 	getCx86(0xc0);   /* dummy to change bus */
@@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 		*dir0 = getCx86(CX86_DIR0);
 		*dir1 = getCx86(CX86_DIR1);
 	}
-	local_irq_restore(flags);
 }
 
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__do_cyrix_devid(dir0, dir1);
+	local_irq_restore(flags);
+}
 /*
  * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
  * order to identify the Cyrix CPU model after we're out of setup.c
@@ -134,23 +139,6 @@ static void __cpuinit set_cx86_memwb(void)
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
 }
 
-static void __cpuinit set_cx86_inc(void)
-{
-	unsigned char ccr3;
-
-	printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
-
-	ccr3 = getCx86(CX86_CCR3);
-	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
-	/* PCR1 -- Performance Control */
-	/* Incrementor on, whatever that is */
-	setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
-	/* PCR0 -- Performance Control */
-	/* Incrementor Margin 10 */
-	setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
-	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
-}
-
 /*
  *	Configure later MediaGX and/or Geode processor.
  */
@@ -174,11 +162,28 @@ static void __cpuinit geode_configure(void)
 
 	set_cx86_memwb();
 	set_cx86_reorder();
-	set_cx86_inc();
 
 	local_irq_restore(flags);
 }
 
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+	unsigned char dir0, dir0_msn, dir1 = 0;
+
+	__do_cyrix_devid(&dir0, &dir1);
+	dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+
+	switch (dir0_msn) {
+	case 3: /* 6x86/6x86L */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	case 5: /* 6x86MX/M II */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	}
+}
 
 static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 {
@@ -434,6 +439,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Cyrix",
 	.c_ident	= { "CyrixInstead" },
+	.c_early_init	= early_init_cyrix,
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
 };
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
index e43ad4ad4cb..c9017799497 100644
--- a/arch/x86/kernel/cpu/feature_names.c
+++ b/arch/x86/kernel/cpu/feature_names.c
@@ -39,7 +39,8 @@ const char * const x86_cap_flags[NCAPINTS*32] = {
 	NULL, NULL, NULL, NULL,
 	"constant_tsc", "up", NULL, "arch_perfmon",
 	"pebs", "bts", NULL, NULL,
-	"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	"rep_good", NULL, NULL, NULL,
+	"nopl", NULL, NULL, NULL,
 	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 	/* Intel-defined (#2) */
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 70609efdf1d..b75f2569b8f 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -227,6 +227,16 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	if (cpu_has_bts)
 		ds_init_intel(c);
 
+	/*
+	 * See if we have a good local APIC by checking for buggy Pentia,
+	 * i.e. all B steppings and the C2 stepping of P54C when using their
+	 * integrated APIC (see 11AP erratum in "Pentium Processor
+	 * Specification Update").
+	 */
+	if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
+	    (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+		set_cpu_cap(c, X86_FEATURE_11AP);
+
 #ifdef CONFIG_X86_NUMAQ
 	numaq_tsc_disable();
 #endif
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 2c8afafa18e..6b0a10b002f 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -489,7 +489,7 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 	int sibling;
 
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
-	for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) {
+	for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
 		sibling_leaf = CPUID4_INFO_IDX(sibling, index);	
 		cpu_clear(cpu, sibling_leaf->shared_cpu_map);
 	}
@@ -780,15 +780,14 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 			}
 			kobject_put(per_cpu(cache_kobject, cpu));
 			cpuid4_cache_sysfs_exit(cpu);
-			break;
+			return retval;
 		}
 		kobject_uevent(&(this_object->kobj), KOBJ_ADD);
 	}
-	if (!retval)
-		cpu_set(cpu, cache_dev_map);
+	cpu_set(cpu, cache_dev_map);
 
 	kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD);
-	return retval;
+	return 0;
 }
 
 static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index c4a7ec31394..726a5fcdf34 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -580,7 +580,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 	char __user *buf = ubuf;
 	int i, err;
 
-	cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL);
+	cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
 	if (!cpu_tsc)
 		return -ENOMEM;
 
@@ -759,13 +759,18 @@ static struct sysdev_class mce_sysclass = {
 };
 
 DEFINE_PER_CPU(struct sys_device, device_mce);
+void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata;
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
-	static ssize_t show_ ## name(struct sys_device *s, char *buf) {	\
+	static ssize_t show_ ## name(struct sys_device *s,		\
+				     struct sysdev_attribute *attr,	\
+				     char *buf) {			\
 		return sprintf(buf, "%lx\n", (unsigned long)var);	\
 	}								\
-	static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \
+	static ssize_t set_ ## name(struct sys_device *s,		\
+				    struct sysdev_attribute *attr,	\
+				    const char *buf, size_t siz) {	\
 		char *end;						\
 		unsigned long new = simple_strtoul(buf, &end, 0);	\
 		if (end == buf) return -EINVAL;				\
@@ -786,14 +791,16 @@ ACCESSOR(bank3ctl,bank[3],mce_restart())
 ACCESSOR(bank4ctl,bank[4],mce_restart())
 ACCESSOR(bank5ctl,bank[5],mce_restart())
 
-static ssize_t show_trigger(struct sys_device *s, char *buf)
+static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				char *buf)
 {
 	strcpy(buf, trigger);
 	strcat(buf, "\n");
 	return strlen(trigger) + 1;
 }
 
-static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
+static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				const char *buf,size_t siz)
 {
 	char *p;
 	int len;
@@ -806,12 +813,12 @@ static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
 }
 
 static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-ACCESSOR(tolerant,tolerant,)
+static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
 ACCESSOR(check_interval,check_interval,mce_restart())
 static struct sysdev_attribute *mce_attributes[] = {
 	&attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl,
 	&attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl,
-	&attr_tolerant, &attr_check_interval, &attr_trigger,
+	&attr_tolerant.attr, &attr_check_interval, &attr_trigger,
 	NULL
 };
 
@@ -877,9 +884,13 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		mce_create_device(cpu);
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
 		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
 		mce_remove_device(cpu);
 		break;
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 7c9a813e119..5eb390a4b2e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -527,7 +527,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	if (err)
 		goto out_free;
 
-	for_each_cpu_mask(i, b->cpus) {
+	for_each_cpu_mask_nr(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
@@ -617,7 +617,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #endif
 
 	/* remove all sibling symlinks before unregistering */
-	for_each_cpu_mask(i, b->cpus) {
+	for_each_cpu_mask_nr(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
@@ -628,6 +628,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 	deallocate_threshold_block(cpu, bank);
 
 free_out:
+	kobject_del(b->kobj);
 	kobject_put(b->kobj);
 	kfree(b);
 	per_cpu(threshold_banks, cpu)[bank] = NULL;
@@ -645,14 +646,11 @@ static void threshold_remove_device(unsigned int cpu)
 }
 
 /* get notified when a cpu comes on/off */
-static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
-					    unsigned long action, void *hcpu)
+static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action,
+						     unsigned int cpu)
 {
-	/* cpu was unsigned int to begin with */
-	unsigned int cpu = (unsigned long)hcpu;
-
 	if (cpu >= NR_CPUS)
-		goto out;
+		return;
 
 	switch (action) {
 	case CPU_ONLINE:
@@ -666,14 +664,8 @@ static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
 	default:
 		break;
 	}
-      out:
-	return NOTIFY_OK;
 }
 
-static struct notifier_block threshold_cpu_notifier __cpuinitdata = {
-	.notifier_call = threshold_cpu_callback,
-};
-
 static __init int threshold_init_device(void)
 {
 	unsigned lcpu = 0;
@@ -684,7 +676,7 @@ static __init int threshold_init_device(void)
 		if (err)
 			return err;
 	}
-	register_hotcpu_notifier(&threshold_cpu_notifier);
+	threshold_cpu_callback = amd_64_threshold_cpu_callback;
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index eef001ad3bd..9b60fce09f7 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -102,7 +102,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	/* The temperature transition interrupt handler setup */
 	h = THERMAL_APIC_VECTOR;		/* our delivery vector */
 	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
-	apic_write_around(APIC_LVTTHMR, h);
+	apic_write(APIC_LVTTHMR, h);
 
 	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
 	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
@@ -114,7 +114,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
 
 	l = apic_read(APIC_LVTTHMR);
-	apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
 	printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
 
 	/* enable thermal throttle processing */
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 1f4cc48c14c..d5ae2243f0b 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -35,6 +35,7 @@ atomic_t therm_throt_en = ATOMIC_INIT(0);
 
 #define define_therm_throt_sysdev_show_func(name)                            \
 static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,        \
+					struct sysdev_attribute *attr,	     \
                                               char *buf)                     \
 {                                                                            \
 	unsigned int cpu = dev->id;                                          \
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 509bd3d9eac..cb7d3b6a80e 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -379,6 +379,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 			     unsigned long *size, mtrr_type *type)
 {
 	unsigned int mask_lo, mask_hi, base_lo, base_hi;
+	unsigned int tmp, hi;
 
 	rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
 	if ((mask_lo & 0x800) == 0) {
@@ -392,8 +393,23 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 	rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
 
 	/* Work out the shifted address mask. */
-	mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
-	    | mask_lo >> PAGE_SHIFT;
+	tmp = mask_hi << (32 - PAGE_SHIFT) | mask_lo >> PAGE_SHIFT;
+	mask_lo = size_or_mask | tmp;
+	/* Expand tmp with high bits to all 1s*/
+	hi = fls(tmp);
+	if (hi > 0) {
+		tmp |= ~((1<<(hi - 1)) - 1);
+
+		if (tmp != mask_lo) {
+			static int once = 1;
+
+			if (once) {
+				printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+				once = 0;
+			}
+			mask_lo = tmp;
+		}
+	}
 
 	/* This works correctly if size is a power of two, i.e. a
 	   contiguous range. */
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 6f23969c8fa..b117d7f8a56 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -1496,11 +1496,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	/* kvm/qemu doesn't have mtrr set right, don't trim them all */
 	if (!highest_pfn) {
-		if (!kvm_para_available()) {
-			printk(KERN_WARNING
+		WARN(!kvm_para_available(), KERN_WARNING
 				"WARNING: strange, CPU MTRRs all blank?\n");
-			WARN_ON(1);
-		}
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 6d4bdc02388..05cc22dbd4f 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -250,7 +250,7 @@ static void write_watchdog_counter(unsigned int perfctr_msr,
 
 	do_div(count, nmi_hz);
 	if(descr)
-		Dprintk("setting %s to -0x%08Lx\n", descr, count);
+		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsrl(perfctr_msr, 0 - count);
 }
 
@@ -261,7 +261,7 @@ static void write_watchdog_counter32(unsigned int perfctr_msr,
 
 	do_div(count, nmi_hz);
 	if(descr)
-		Dprintk("setting %s to -0x%08Lx\n", descr, count);
+		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsr(perfctr_msr, (u32)(-count), 0);
 }
 
@@ -478,7 +478,13 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 		perfctr_msr = MSR_P4_IQ_PERFCTR1;
 		evntsel_msr = MSR_P4_CRU_ESCR0;
 		cccr_msr = MSR_P4_IQ_CCCR1;
-		cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
+
+		/* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */
+		if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4)
+			cccr_val = P4_CCCR_OVF_PMI0;
+		else
+			cccr_val = P4_CCCR_OVF_PMI1;
+		cccr_val |= P4_CCCR_ESCR_SELECT(4);
 	}
 
 	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 0d0d9057e7c..a26c480b949 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -160,7 +160,7 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
 		*pos = first_cpu(cpu_online_map);
-	if ((*pos) < NR_CPUS && cpu_online(*pos))
+	if ((*pos) < nr_cpu_ids && cpu_online(*pos))
 		return &cpu_data(*pos);
 	return NULL;
 }
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 2de5fa2bbf7..8e9cd6a8ec1 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -89,6 +89,8 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	struct cpuid_regs cmd;
 	int cpu = iminor(file->f_path.dentry->d_inode);
 	u64 pos = *ppos;
+	ssize_t bytes = 0;
+	int err = 0;
 
 	if (count % 16)
 		return -EINVAL;	/* Invalid chunk size */
@@ -96,14 +98,19 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	for (; count; count -= 16) {
 		cmd.eax = pos;
 		cmd.ecx = pos >> 32;
-		smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
-		if (copy_to_user(tmp, &cmd, 16))
-			return -EFAULT;
+		err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
+		if (err)
+			break;
+		if (copy_to_user(tmp, &cmd, 16)) {
+			err = -EFAULT;
+			break;
+		}
 		tmp += 16;
+		bytes += 16;
 		*ppos = ++pos;
 	}
 
-	return tmp - buf;
+	return bytes ? bytes : err;
 }
 
 static int cpuid_open(struct inode *inode, struct file *file)
@@ -141,8 +148,8 @@ static __cpuinit int cpuid_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
-			    "cpu%d", cpu);
+	dev = device_create_drvdata(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
+				    NULL, "cpu%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 28c29180b38..66e48aa2dd1 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -877,7 +877,8 @@ void __init early_res_to_bootmem(u64 start, u64 end)
 	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++)
 		count++;
 
-	printk(KERN_INFO "(%d early reservations) ==> bootmem\n", count);
+	printk(KERN_INFO "(%d early reservations) ==> bootmem [%010llx - %010llx]\n",
+			 count, start, end);
 	for (i = 0; i < count; i++) {
 		struct early_res *r = &early_res[i];
 		printk(KERN_INFO "  #%d [%010llx - %010llx] %16s", i,
@@ -1202,7 +1203,7 @@ static int __init parse_memmap_opt(char *p)
 	if (!p)
 		return -EINVAL;
 
-	if (!strcmp(p, "exactmap")) {
+	if (!strncmp(p, "exactmap", 8)) {
 #ifdef CONFIG_CRASH_DUMP
 		/*
 		 * If we are doing a crash dump, we still need to know
@@ -1298,11 +1299,6 @@ void __init e820_reserve_resources(void)
 	}
 }
 
-/*
- * Non-standard memory setup can be specified via this quirk:
- */
-char * (*arch_memory_setup_quirk)(void);
-
 char *__init default_machine_specific_memory_setup(void)
 {
 	char *who = "BIOS-e820";
@@ -1343,8 +1339,8 @@ char *__init default_machine_specific_memory_setup(void)
 
 char *__init __attribute__((weak)) machine_specific_memory_setup(void)
 {
-	if (arch_memory_setup_quirk) {
-		char *who = arch_memory_setup_quirk();
+	if (x86_quirks->arch_memory_setup) {
+		char *who = x86_quirks->arch_memory_setup();
 
 		if (who)
 			return who;
@@ -1367,24 +1363,3 @@ void __init setup_memory_map(void)
 	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
 	e820_print_map(who);
 }
-
-#ifdef CONFIG_X86_64
-int __init arch_get_ram_range(int slot, u64 *addr, u64 *size)
-{
-	int i;
-
-	if (slot < 0 || slot >= e820.nr_map)
-		return -1;
-	for (i = slot; i < e820.nr_map; i++) {
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		break;
-	}
-	if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT))
-		return -1;
-	*addr = e820.map[i].addr;
-	*size = min_t(u64, e820.map[i].size + e820.map[i].addr,
-		max_pfn << PAGE_SHIFT) - *addr;
-	return i + 1;
-}
-#endif
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index a0e11c0cc87..4353cf5e6fa 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -16,10 +16,7 @@
 #include <asm/dma.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
-
-#ifdef CONFIG_GART_IOMMU
-#include <asm/gart.h>
-#endif
+#include <asm/iommu.h>
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c
index 4b63c8e1f13..5cab48ee61a 100644
--- a/arch/x86/kernel/efi_32.c
+++ b/arch/x86/kernel/efi_32.c
@@ -53,7 +53,7 @@ void efi_call_phys_prelog(void)
 	 * directory. If I have PAE, I just need to duplicate one entry in
 	 * page directory.
 	 */
-	cr4 = read_cr4();
+	cr4 = read_cr4_safe();
 
 	if (cr4 & X86_CR4_PAE) {
 		efi_bak_pg_dir_pointer[0].pgd =
@@ -91,7 +91,7 @@ void efi_call_phys_epilog(void)
 	gdt_descr.size = GDT_SIZE - 1;
 	load_gdt(&gdt_descr);
 
-	cr4 = read_cr4();
+	cr4 = read_cr4_safe();
 
 	if (cr4 & X86_CR4_PAE) {
 		swapper_pg_dir[pgd_index(0)].pgd =
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 6bc07f0f120..109792bc7cf 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -54,6 +54,16 @@
 #include <asm/ftrace.h>
 #include <asm/irq_vectors.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysenter_audit	syscall_trace_entry
+#define sysexit_audit	syscall_exit_work
+#endif
+
 /*
  * We use macros for low-level operations which need to be overridden
  * for paravirtualization.  The following will never clobber any registers:
@@ -332,8 +342,9 @@ sysenter_past_esp:
 	GET_THREAD_INFO(%ebp)
 
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
-	jnz syscall_trace_entry
+	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
+	jnz sysenter_audit
+sysenter_do_call:
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
 	call *sys_call_table(,%eax,4)
@@ -343,7 +354,8 @@ sysenter_past_esp:
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx
-	jne syscall_exit_work
+	jne sysexit_audit
+sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
 	movl PT_EIP(%esp), %edx
 	movl PT_OLDESP(%esp), %ecx
@@ -351,6 +363,45 @@ sysenter_past_esp:
 	TRACE_IRQS_ON
 1:	mov  PT_FS(%esp), %fs
 	ENABLE_INTERRUPTS_SYSEXIT
+
+#ifdef CONFIG_AUDITSYSCALL
+sysenter_audit:
+	testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	addl $4,%esp
+	CFI_ADJUST_CFA_OFFSET -4
+	/* %esi already in 8(%esp)	   6th arg: 4th syscall arg */
+	/* %edx already in 4(%esp)	   5th arg: 3rd syscall arg */
+	/* %ecx already in 0(%esp)	   4th arg: 2nd syscall arg */
+	movl %ebx,%ecx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%edx			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%eax	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	movl PT_EAX(%esp),%eax		/* reload syscall number */
+	jmp sysenter_do_call
+
+sysexit_audit:
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	movl %eax,%edx		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%eax		/* zero-extend that */
+	inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	movl TI_flags(%ebp), %ecx
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	movl PT_EAX(%esp),%eax	/* reload syscall return value */
+	jmp sysenter_exit
+#endif
+
 	CFI_ENDPROC
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
@@ -370,7 +421,7 @@ ENTRY(system_call)
 	GET_THREAD_INFO(%ebp)
 					# system call tracing in operation / emulation
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz syscall_trace_entry
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
@@ -383,10 +434,6 @@ syscall_exit:
 					# setting need_resched or sigpending
 					# between sampling and the iret
 	TRACE_IRQS_OFF
-	testl $X86_EFLAGS_TF,PT_EFLAGS(%esp)	# If tracing set singlestep flag on exit
-	jz no_singlestep
-	orl $_TIF_SINGLESTEP,TI_flags(%ebp)
-no_singlestep:
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx	# current->work
 	jne syscall_exit_work
@@ -514,12 +561,8 @@ END(work_pending)
 syscall_trace_entry:
 	movl $-ENOSYS,PT_EAX(%esp)
 	movl %esp, %eax
-	xorl %edx,%edx
-	call do_syscall_trace
-	cmpl $0, %eax
-	jne resume_userspace		# ret != 0 -> running under PTRACE_SYSEMU,
-					# so must skip actual syscall
-	movl PT_ORIG_EAX(%esp), %eax
+	call syscall_trace_enter
+	/* What it returned is what we'll actually use.  */
 	cmpl $(nr_syscalls), %eax
 	jnae syscall_call
 	jmp syscall_exit
@@ -528,14 +571,13 @@ END(syscall_trace_entry)
 	# perform syscall exit tracing
 	ALIGN
 syscall_exit_work:
-	testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
+	testb $_TIF_WORK_SYSCALL_EXIT, %cl
 	jz work_pending
 	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)	# could let do_syscall_trace() call
+	ENABLE_INTERRUPTS(CLBR_ANY)	# could let syscall_trace_leave() call
 					# schedule() instead
 	movl %esp, %eax
-	movl $1, %edx
-	call do_syscall_trace
+	call syscall_trace_leave
 	jmp resume_userspace
 END(syscall_exit_work)
 	CFI_ENDPROC
@@ -1024,6 +1066,7 @@ ENDPROC(kernel_thread_helper)
 ENTRY(xen_sysenter_target)
 	RING0_INT_FRAME
 	addl $5*4, %esp		/* remove xen-provided frame */
+	CFI_ADJUST_CFA_OFFSET -5*4
 	jmp sysenter_past_esp
 	CFI_ENDPROC
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index ae63e584c34..89434d43960 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -53,6 +53,12 @@
 #include <asm/paravirt.h>
 #include <asm/ftrace.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE	   0x40000000
+
 	.code64
 
 #ifdef CONFIG_FTRACE
@@ -349,9 +355,9 @@ ENTRY(system_call_after_swapgs)
 	movq  %rcx,RIP-ARGOFFSET(%rsp)
 	CFI_REL_OFFSET rip,RIP-ARGOFFSET
 	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-		TI_flags(%rcx)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
 	jnz tracesys
+system_call_fastpath:
 	cmpq $__NR_syscall_max,%rax
 	ja badsys
 	movq %r10,%rcx
@@ -403,16 +409,16 @@ sysret_careful:
 sysret_signal:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	testl $_TIF_DO_NOTIFY_MASK,%edx
-	jz    1f
-
-	/* Really a signal */
+#ifdef CONFIG_AUDITSYSCALL
+	bt $TIF_SYSCALL_AUDIT,%edx
+	jc sysret_audit
+#endif
 	/* edx:	work flags (arg3) */
 	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
 	call ptregscall_common
-1:	movl $_TIF_WORK_MASK,%edi
+	movl $_TIF_WORK_MASK,%edi
 	/* Use IRET because user could have changed frame. This
 	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
 	DISABLE_INTERRUPTS(CLBR_NONE)
@@ -423,14 +429,56 @@ badsys:
 	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
 	jmp ret_from_sys_call
 
+#ifdef CONFIG_AUDITSYSCALL
+	/*
+	 * Fast path for syscall audit without full syscall trace.
+	 * We just call audit_syscall_entry() directly, and then
+	 * jump back to the normal fast path.
+	 */
+auditsys:
+	movq %r10,%r9			/* 6th arg: 4th syscall arg */
+	movq %rdx,%r8			/* 5th arg: 3rd syscall arg */
+	movq %rsi,%rcx			/* 4th arg: 2nd syscall arg */
+	movq %rdi,%rdx			/* 3rd arg: 1st syscall arg */
+	movq %rax,%rsi			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_X86_64,%edi	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	LOAD_ARGS 0		/* reload call-clobbered registers */
+	jmp system_call_fastpath
+
+	/*
+	 * Return fast path for syscall audit.  Call audit_syscall_exit()
+	 * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
+	 * masked off.
+	 */
+sysret_audit:
+	movq %rax,%rsi		/* second arg, syscall return value */
+	cmpq $0,%rax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%edi		/* zero-extend that into %edi */
+	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+	jmp sysret_check
+#endif	/* CONFIG_AUDITSYSCALL */
+
 	/* Do syscall tracing */
 tracesys:			 
+#ifdef CONFIG_AUDITSYSCALL
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+	jz auditsys
+#endif
 	SAVE_REST
 	movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
 	FIXUP_TOP_OF_STACK %rdi
 	movq %rsp,%rdi
 	call syscall_trace_enter
-	LOAD_ARGS ARGOFFSET  /* reload args from stack in case ptrace changed it */
+	/*
+	 * Reload arg registers from stack in case ptrace changed them.
+	 * We don't reload %rax because syscall_trace_enter() returned
+	 * the value it wants us to use in the table lookup.
+	 */
+	LOAD_ARGS ARGOFFSET, 1
 	RESTORE_REST
 	cmpq $__NR_syscall_max,%rax
 	ja   int_ret_from_sys_call	/* RAX(%rsp) set to -ENOSYS above */
@@ -444,6 +492,7 @@ tracesys:
  * Has correct top of stack, but partial stack frame.
  */
 	.globl int_ret_from_sys_call
+	.globl int_with_check
 int_ret_from_sys_call:
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
@@ -483,7 +532,7 @@ int_very_careful:
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_REST
 	/* Check for syscall exit trace */	
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
+	testl $_TIF_WORK_SYSCALL_EXIT,%edx
 	jz int_signal
 	pushq %rdi
 	CFI_ADJUST_CFA_OFFSET 8
@@ -491,7 +540,7 @@ int_very_careful:
 	call syscall_trace_leave
 	popq %rdi
 	CFI_ADJUST_CFA_OFFSET -8
-	andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
+	andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
 	jmp int_restore_rest
 	
 int_signal:
@@ -1189,6 +1238,7 @@ END(device_not_available)
 	/* runs on exception stack */
 KPROBE_ENTRY(debug)
  	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $0
 	CFI_ADJUST_CFA_OFFSET 8		
 	paranoidentry do_debug, DEBUG_STACK
@@ -1198,6 +1248,7 @@ KPROBE_END(debug)
 	/* runs on exception stack */	
 KPROBE_ENTRY(nmi)
 	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $-1
 	CFI_ADJUST_CFA_OFFSET 8
 	paranoidentry do_nmi, 0, 0
@@ -1211,6 +1262,7 @@ KPROBE_END(nmi)
 
 KPROBE_ENTRY(int3)
  	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
  	pushq $0
  	CFI_ADJUST_CFA_OFFSET 8
  	paranoidentry do_int3, DEBUG_STACK
@@ -1237,6 +1289,7 @@ END(coprocessor_segment_overrun)
 	/* runs on exception stack */
 ENTRY(double_fault)
 	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	paranoidentry do_double_fault
 	jmp paranoid_exit1
 	CFI_ENDPROC
@@ -1253,6 +1306,7 @@ END(segment_not_present)
 	/* runs on exception stack */
 ENTRY(stack_segment)
 	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	paranoidentry do_stack_segment
 	jmp paranoid_exit1
 	CFI_ENDPROC
@@ -1278,6 +1332,7 @@ END(spurious_interrupt_bug)
 	/* runs on exception stack */
 ENTRY(machine_check)
 	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $0
 	CFI_ADJUST_CFA_OFFSET 8	
 	paranoidentry do_machine_check
@@ -1312,3 +1367,103 @@ KPROBE_ENTRY(ignore_sysret)
 	sysret
 	CFI_ENDPROC
 ENDPROC(ignore_sysret)
+
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+	zeroentry xen_do_hypervisor_callback
+END(xen_hypervisor_callback)
+
+/*
+# A note on the "critical region" in our callback handler.
+# We want to avoid stacking callback handlers due to events occurring
+# during handling of the last event. To do this, we keep events disabled
+# until we've done all processing. HOWEVER, we must enable events before
+# popping the stack frame (can't be done atomically) and so it would still
+# be possible to get enough handler activations to overflow the stack.
+# Although unlikely, bugs of that kind are hard to track down, so we'd
+# like to avoid the possibility.
+# So, on entry to the handler we detect whether we interrupted an
+# existing activation in its critical region -- if so, we pop the current
+# activation and restart the handler using the previous one.
+*/
+ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
+	CFI_STARTPROC
+/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+   see the correct pointer to the pt_regs */
+	movq %rdi, %rsp            # we don't return, adjust the stack frame
+	CFI_ENDPROC
+	CFI_DEFAULT_STACK
+11:	incl %gs:pda_irqcount
+	movq %rsp,%rbp
+	CFI_DEF_CFA_REGISTER rbp
+	cmovzq %gs:pda_irqstackptr,%rsp
+	pushq %rbp			# backlink for old unwinder
+	call xen_evtchn_do_upcall
+	popq %rsp
+	CFI_DEF_CFA_REGISTER rsp
+	decl %gs:pda_irqcount
+	jmp  error_exit
+	CFI_ENDPROC
+END(do_hypervisor_callback)
+
+/*
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+#  1. Fault while reloading DS, ES, FS or GS
+#  2. Fault while executing IRET
+# Category 1 we do not need to fix up as Xen has already reloaded all segment
+# registers that could be reloaded and zeroed the others.
+# Category 2 we fix up by killing the current process. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by comparing each saved segment register
+# with its current contents: any discrepancy means we in category 1.
+*/
+ENTRY(xen_failsafe_callback)
+	framesz = (RIP-0x30)	/* workaround buggy gas */
+	_frame framesz
+	CFI_REL_OFFSET rcx, 0
+	CFI_REL_OFFSET r11, 8
+	movw %ds,%cx
+	cmpw %cx,0x10(%rsp)
+	CFI_REMEMBER_STATE
+	jne 1f
+	movw %es,%cx
+	cmpw %cx,0x18(%rsp)
+	jne 1f
+	movw %fs,%cx
+	cmpw %cx,0x20(%rsp)
+	jne 1f
+	movw %gs,%cx
+	cmpw %cx,0x28(%rsp)
+	jne 1f
+	/* All segments match their saved values => Category 2 (Bad IRET). */
+	movq (%rsp),%rcx
+	CFI_RESTORE rcx
+	movq 8(%rsp),%r11
+	CFI_RESTORE r11
+	addq $0x30,%rsp
+	CFI_ADJUST_CFA_OFFSET -0x30
+	pushq $0
+	CFI_ADJUST_CFA_OFFSET 8
+	pushq %r11
+	CFI_ADJUST_CFA_OFFSET 8
+	pushq %rcx
+	CFI_ADJUST_CFA_OFFSET 8
+	jmp general_protection
+	CFI_RESTORE_STATE
+1:	/* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
+	movq (%rsp),%rcx
+	CFI_RESTORE rcx
+	movq 8(%rsp),%r11
+	CFI_RESTORE r11
+	addq $0x30,%rsp
+	CFI_ADJUST_CFA_OFFSET -0x30
+	pushq $0
+	CFI_ADJUST_CFA_OFFSET 8
+	SAVE_ALL
+	jmp error_exit
+	CFI_ENDPROC
+END(xen_failsafe_callback)
+
+#endif /* CONFIG_XEN */
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 1fa8be5bd21..eaff0bbb144 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -99,3 +99,4 @@ int is_uv_system(void)
 {
 	return uv_system_type != UV_NONE;
 }
+EXPORT_SYMBOL_GPL(is_uv_system);
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 1a9c68845ee..786548a62d3 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -168,7 +168,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
 	 * May as well be the first.
 	 */
 	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
+	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 711f11c30b0..bfa837cb16b 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -24,6 +24,7 @@
 #include <asm/pgtable.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
 
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
@@ -40,6 +41,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
 short uv_possible_blades;
 EXPORT_SYMBOL_GPL(uv_possible_blades);
 
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
 
 static cpumask_t uv_target_cpus(void)
@@ -94,7 +98,7 @@ static void uv_send_IPI_mask(cpumask_t mask, int vector)
 {
 	unsigned int cpu;
 
-	for (cpu = 0; cpu < NR_CPUS; ++cpu)
+	for_each_possible_cpu(cpu)
 		if (cpu_isset(cpu, mask))
 			uv_send_IPI_one(cpu, vector);
 }
@@ -128,7 +132,7 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
 	 * May as well be the first.
 	 */
 	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
+	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
@@ -218,7 +222,7 @@ static __init void map_low_mmrs(void)
 
 enum map_type {map_wb, map_uc};
 
-static void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
 {
 	unsigned long bytes, paddr;
 
@@ -272,7 +276,26 @@ static __init void map_mmioh_high(int max_pnode)
 		map_high("MMIOH", mmioh.s.base, shift, map_uc);
 }
 
-static __init void uv_system_init(void)
+static __init void uv_rtc_init(void)
+{
+	long status, ticks_per_sec, drift;
+
+	status =
+	    x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+					&drift);
+	if (status != 0 || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}
+
+static bool uv_system_inited;
+
+void __init uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
 	union uvh_node_id_u node_id;
@@ -326,6 +349,8 @@ static __init void uv_system_init(void)
 	gnode_upper = (((unsigned long)node_id.s.node_id) &
 		       ~((1 << n_val) - 1)) << m_val;
 
+	uv_rtc_init();
+
 	for_each_present_cpu(cpu) {
 		nid = cpu_to_node(cpu);
 		pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
@@ -360,6 +385,7 @@ static __init void uv_system_init(void)
 	map_mmr_high(max_pnode);
 	map_config_high(max_pnode);
 	map_mmioh_high(max_pnode);
+	uv_system_inited = true;
 }
 
 /*
@@ -368,8 +394,7 @@ static __init void uv_system_init(void)
  */
 void __cpuinit uv_cpu_init(void)
 {
-	if (!uv_node_to_blade)
-		uv_system_init();
+	BUG_ON(!uv_system_inited);
 
 	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
 
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index c9781982914..9bfc4d72fb2 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -39,6 +39,13 @@ static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata;
 static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly;
 #endif
 
+void __init x86_64_init_pda(void)
+{
+	_cpu_pda = __cpu_pda;
+	cpu_pda(0) = &_boot_cpu_pda;
+	pda_init(0);
+}
+
 static void __init zap_identity_mappings(void)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
@@ -81,6 +88,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
 	BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
 				(__START_KERNEL & PGDIR_MASK)));
+	BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END);
 
 	/* clear bss before set_intr_gate with early_idt_handler */
 	clear_bss();
@@ -102,9 +110,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 
 	early_printk("Kernel alive\n");
 
-	_cpu_pda = __cpu_pda;
-	cpu_pda(0) = &_boot_cpu_pda;
-	pda_init(0);
+	x86_64_init_pda();
 
 	early_printk("Kernel really alive\n");
 
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f67e93441ca..a7010c3a377 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -456,9 +456,6 @@ is386:	movl $2,%ecx		# set MP
 1:
 #endif /* CONFIG_SMP */
 	jmp *(initial_code)
-.align 4
-ENTRY(initial_code)
-	.long i386_start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
@@ -601,6 +598,11 @@ ignore_int:
 #endif
 	iret
 
+.section .cpuinit.data,"wa"
+.align 4
+ENTRY(initial_code)
+	.long i386_start_kernel
+
 .section .text
 /*
  * Real beginning of normal "text" segment
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index b07ac7b217c..db3280afe88 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -407,6 +407,7 @@ ENTRY(phys_base)
 	/* This must match the first entry in level2_kernel_pgt */
 	.quad   0x0000000000000000
 
+#include "../../x86/xen/xen-head.S"
 	
 	.section .bss, "aw", @nobits
 	.align L1_CACHE_BYTES
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 0ea6a19bfdf..73deaffadd0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -210,8 +210,8 @@ static void hpet_legacy_clockevent_register(void)
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
-	hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
-							   &hpet_clockevent);
+	/* 5 usec minimum reprogramming delta. */
+	hpet_clockevent.min_delta_ns = 5000;
 
 	/*
 	 * Start hpet with the boot cpu mask and make it
@@ -270,15 +270,22 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode,
 }
 
 static int hpet_legacy_next_event(unsigned long delta,
-			   struct clock_event_device *evt)
+				  struct clock_event_device *evt)
 {
-	unsigned long cnt;
+	u32 cnt;
 
 	cnt = hpet_readl(HPET_COUNTER);
-	cnt += delta;
+	cnt += (u32) delta;
 	hpet_writel(cnt, HPET_T0_CMP);
 
-	return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
+	/*
+	 * We need to read back the CMP register to make sure that
+	 * what we wrote hit the chip before we compare it to the
+	 * counter.
+	 */
+	WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt);
+
+	return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
 
 /*
@@ -359,6 +366,7 @@ static int hpet_clocksource_register(void)
 int __init hpet_enable(void)
 {
 	unsigned long id;
+	int i;
 
 	if (!is_hpet_capable())
 		return 0;
@@ -369,6 +377,29 @@ int __init hpet_enable(void)
 	 * Read the period and check for a sane value:
 	 */
 	hpet_period = hpet_readl(HPET_PERIOD);
+
+	/*
+	 * AMD SB700 based systems with spread spectrum enabled use a
+	 * SMM based HPET emulation to provide proper frequency
+	 * setting. The SMM code is initialized with the first HPET
+	 * register access and takes some time to complete. During
+	 * this time the config register reads 0xffffffff. We check
+	 * for max. 1000 loops whether the config register reads a non
+	 * 0xffffffff value to make sure that HPET is up and running
+	 * before we go further. A counting loop is safe, as the HPET
+	 * access takes thousands of CPU cycles. On non SB700 based
+	 * machines this check is only done once and has no side
+	 * effects.
+	 */
+	for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) {
+		if (i == 1000) {
+			printk(KERN_WARNING
+			       "HPET config register value = 0xFFFFFFFF. "
+			       "Disabling HPET\n");
+			goto out_nohpet;
+		}
+	}
+
 	if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
 		goto out_nohpet;
 
@@ -468,7 +499,7 @@ void hpet_disable(void)
 #define RTC_NUM_INTS		1
 
 static unsigned long hpet_rtc_flags;
-static unsigned long hpet_prev_update_sec;
+static int hpet_prev_update_sec;
 static struct rtc_time hpet_alarm_time;
 static unsigned long hpet_pie_count;
 static unsigned long hpet_t1_cmp;
@@ -575,6 +606,9 @@ int hpet_set_rtc_irq_bit(unsigned long bit_mask)
 
 	hpet_rtc_flags |= bit_mask;
 
+	if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
+		hpet_prev_update_sec = -1;
+
 	if (!oldbits)
 		hpet_rtc_timer_init();
 
@@ -652,7 +686,7 @@ static void hpet_rtc_timer_reinit(void)
 		if (hpet_rtc_flags & RTC_PIE)
 			hpet_pie_count += lost_ints;
 		if (printk_ratelimit())
-			printk(KERN_WARNING "rtc: lost %d interrupts\n",
+			printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n",
 				lost_ints);
 	}
 }
@@ -670,7 +704,8 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 
 	if (hpet_rtc_flags & RTC_UIE &&
 	    curr_time.tm_sec != hpet_prev_update_sec) {
-		rtc_int_flag = RTC_UF;
+		if (hpet_prev_update_sec >= 0)
+			rtc_int_flag = RTC_UF;
 		hpet_prev_update_sec = curr_time.tm_sec;
 	}
 
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 558abf4c796..09cddb57bec 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -57,7 +57,7 @@ atomic_t irq_mis_count;
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
-static DEFINE_SPINLOCK(vector_lock);
+DEFINE_SPINLOCK(vector_lock);
 
 int timer_through_8259 __initdata;
 
@@ -756,7 +756,7 @@ void send_IPI_self(int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 #endif /* !CONFIG_SMP */
 
@@ -1209,10 +1209,6 @@ static int assign_irq_vector(int irq)
 	return vector;
 }
 
-void setup_vector_irq(int cpu)
-{
-}
-
 static struct irq_chip ioapic_chip;
 
 #define IOAPIC_AUTO	-1
@@ -2030,7 +2026,7 @@ static void mask_lapic_irq(unsigned int irq)
 	unsigned long v;
 
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
 }
 
 static void unmask_lapic_irq(unsigned int irq)
@@ -2038,7 +2034,7 @@ static void unmask_lapic_irq(unsigned int irq)
 	unsigned long v;
 
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
 }
 
 static struct irq_chip lapic_chip __read_mostly = {
@@ -2168,7 +2164,7 @@ static inline void __init check_timer(void)
 	 * The AEOI mode will finish them in the 8259A
 	 * automatically.
 	 */
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
 	timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
 
@@ -2177,8 +2173,9 @@ static inline void __init check_timer(void)
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		vector, apic1, pin1, apic2, pin2);
+	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		    vector, apic1, pin1, apic2, pin2);
 
 	/*
 	 * Some BIOS writers are clueless and report the ExtINTA
@@ -2216,12 +2213,13 @@ static inline void __init check_timer(void)
 		}
 		clear_IO_APIC_pin(apic1, pin1);
 		if (!no_pin1)
-			printk(KERN_ERR "..MP-BIOS bug: "
-			       "8254 timer not connected to IO-APIC\n");
+			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+				    "8254 timer not connected to IO-APIC\n");
 
-		printk(KERN_INFO "...trying to set up timer (IRQ0) "
-		       "through the 8259A ... ");
-		printk("\n..... (found pin %d) ...", pin2);
+		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+			    "(IRQ0) through the 8259A ...\n");
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
@@ -2230,7 +2228,7 @@ static inline void __init check_timer(void)
 		unmask_IO_APIC_irq(0);
 		enable_8259A_irq(0);
 		if (timer_irq_works()) {
-			printk("works.\n");
+			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
 			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
 				disable_8259A_irq(0);
@@ -2244,44 +2242,47 @@ static inline void __init check_timer(void)
 		 */
 		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
-		printk(" failed.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
 
 	if (nmi_watchdog == NMI_IO_APIC) {
-		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+			    "through the IO-APIC - disabling NMI Watchdog!\n");
 		nmi_watchdog = NMI_NONE;
 	}
 	timer_ack = 0;
 
-	printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as Virtual Wire IRQ...\n");
 
 	lapic_register_intr(0, vector);
-	apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
+	apic_write(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
 	if (timer_irq_works()) {
-		printk(" works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
 	disable_8259A_irq(0);
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
-	printk(" failed.\n");
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
-	printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as ExtINT IRQ...\n");
 
 	init_8259A(0);
 	make_8259A_irq(0);
-	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
 
 	unlock_ExtINT_logic();
 
 	if (timer_irq_works()) {
-		printk(" works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
-	printk(" failed :(.\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
 	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
-		"report.  Then try booting with the 'noapic' option");
+		"report.  Then try booting with the 'noapic' option.\n");
 out:
 	local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index 6510cde36b3..61a83b70c18 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -45,6 +45,7 @@
 #include <asm/proto.h>
 #include <asm/acpi.h>
 #include <asm/dma.h>
+#include <asm/i8259.h>
 #include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
@@ -100,7 +101,7 @@ int timer_through_8259 __initdata;
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
-DEFINE_SPINLOCK(vector_lock);
+static DEFINE_SPINLOCK(vector_lock);
 
 /*
  * # of IRQ routing registers
@@ -696,6 +697,19 @@ static int pin_2_irq(int idx, int apic, int pin)
 	return irq;
 }
 
+void lock_vector_lock(void)
+{
+	/* Used to the online set of cpus does not change
+	 * during assign_irq_vector.
+	 */
+	spin_lock(&vector_lock);
+}
+
+void unlock_vector_lock(void)
+{
+	spin_unlock(&vector_lock);
+}
+
 static int __assign_irq_vector(int irq, cpumask_t mask)
 {
 	/*
@@ -731,7 +745,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask)
 			return 0;
 	}
 
-	for_each_cpu_mask(cpu, mask) {
+	for_each_cpu_mask_nr(cpu, mask) {
 		cpumask_t domain, new_mask;
 		int new_cpu;
 		int vector, offset;
@@ -752,7 +766,7 @@ next:
 			continue;
 		if (vector == IA32_SYSCALL_VECTOR)
 			goto next;
-		for_each_cpu_mask(new_cpu, new_mask)
+		for_each_cpu_mask_nr(new_cpu, new_mask)
 			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
 				goto next;
 		/* Found one! */
@@ -762,7 +776,7 @@ next:
 			cfg->move_in_progress = 1;
 			cfg->old_domain = cfg->domain;
 		}
-		for_each_cpu_mask(new_cpu, new_mask)
+		for_each_cpu_mask_nr(new_cpu, new_mask)
 			per_cpu(vector_irq, new_cpu)[vector] = irq;
 		cfg->vector = vector;
 		cfg->domain = domain;
@@ -794,14 +808,14 @@ static void __clear_irq_vector(int irq)
 
 	vector = cfg->vector;
 	cpus_and(mask, cfg->domain, cpu_online_map);
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
 	cfg->vector = 0;
 	cpus_clear(cfg->domain);
 }
 
-static void __setup_vector_irq(int cpu)
+void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
 	/* This function must be called with vector_lock held */
@@ -824,14 +838,6 @@ static void __setup_vector_irq(int cpu)
 	}
 }
 
-void setup_vector_irq(int cpu)
-{
-	spin_lock(&vector_lock);
-	__setup_vector_irq(smp_processor_id());
-	spin_unlock(&vector_lock);
-}
-
-
 static struct irq_chip ioapic_chip;
 
 static void ioapic_register_intr(int irq, unsigned long trigger)
@@ -1372,12 +1378,10 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 static int ioapic_retrigger_irq(unsigned int irq)
 {
 	struct irq_cfg *cfg = &irq_cfg[irq];
-	cpumask_t mask;
 	unsigned long flags;
 
 	spin_lock_irqsave(&vector_lock, flags);
-	mask = cpumask_of_cpu(first_cpu(cfg->domain));
-	send_IPI_mask(mask, cfg->vector);
+	send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
 	spin_unlock_irqrestore(&vector_lock, flags);
 
 	return 1;
@@ -1696,8 +1700,9 @@ static inline void __init check_timer(void)
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		cfg->vector, apic1, pin1, apic2, pin2);
+	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		    cfg->vector, apic1, pin1, apic2, pin2);
 
 	/*
 	 * Some BIOS writers are clueless and report the ExtINTA
@@ -1735,14 +1740,13 @@ static inline void __init check_timer(void)
 		}
 		clear_IO_APIC_pin(apic1, pin1);
 		if (!no_pin1)
-			apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: "
+			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
 				    "8254 timer not connected to IO-APIC\n");
 
-		apic_printk(APIC_VERBOSE,KERN_INFO
-			"...trying to set up timer (IRQ0) "
-			"through the 8259A ... ");
-		apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
-			apic2, pin2);
+		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+			    "(IRQ0) through the 8259A ...\n");
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
@@ -1751,7 +1755,7 @@ static inline void __init check_timer(void)
 		unmask_IO_APIC_irq(0);
 		enable_8259A_irq(0);
 		if (timer_irq_works()) {
-			apic_printk(APIC_VERBOSE," works.\n");
+			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
 			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
 				disable_8259A_irq(0);
@@ -1765,29 +1769,32 @@ static inline void __init check_timer(void)
 		 */
 		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
-		apic_printk(APIC_VERBOSE," failed.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
 
 	if (nmi_watchdog == NMI_IO_APIC) {
-		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+			    "through the IO-APIC - disabling NMI Watchdog!\n");
 		nmi_watchdog = NMI_NONE;
 	}
 
-	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as Virtual Wire IRQ...\n");
 
 	lapic_register_intr(0);
 	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
 	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
 	disable_8259A_irq(0);
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
-	apic_printk(APIC_VERBOSE," failed.\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
-	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as ExtINT IRQ...\n");
 
 	init_8259A(0);
 	make_8259A_irq(0);
@@ -1796,11 +1803,12 @@ static inline void __init check_timer(void)
 	unlock_ExtINT_logic();
 
 	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
-	apic_printk(APIC_VERBOSE," failed :(.\n");
-	panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
+		"report.  Then try booting with the 'noapic' option.\n");
 out:
 	local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index 5921e5f0a64..720d2607aac 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -92,6 +92,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "30BF")
 		}
 	},
+	{
+		.callback	= dmi_io_delay_0xed_port,
+		.ident		= "Presario F700",
+		.matches	= {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+			DMI_MATCH(DMI_BOARD_NAME, "30D3")
+		}
+	},
 	{ }
 };
 
@@ -103,6 +111,9 @@ void __init io_delay_init(void)
 
 static int __init io_delay_param(char *s)
 {
+	if (!s)
+		return -EINVAL;
+
 	if (!strcmp(s, "0x80"))
 		io_delay_type = CONFIG_IO_DELAY_TYPE_0X80;
 	else if (!strcmp(s, "0xed"))
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 9d98cda39ad..3f7537b669d 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -70,7 +70,7 @@ void __send_IPI_shortcut(unsigned int shortcut, int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 
 void send_IPI_self(int vector)
@@ -98,7 +98,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
 	 * prepare target chip field
 	 */
 	cfg = __prepare_ICR2(mask);
-	apic_write_around(APIC_ICR2, cfg);
+	apic_write(APIC_ICR2, cfg);
 
 	/*
 	 * program the ICR
@@ -108,7 +108,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 
 /*
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 47a6f6f1247..1cf8c1fcc08 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -83,11 +83,8 @@ union irq_ctx {
 static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
 
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
-
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
 
 static void call_on_stack(void *func, void *stack)
 {
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 0373e88de95..1f26fd9ec4f 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -43,10 +43,11 @@
 
 #define BUILD_IRQ(nr)				\
 	asmlinkage void IRQ_NAME(nr);		\
-	asm("\n.p2align\n"			\
+	asm("\n.text\n.p2align\n"		\
 	    "IRQ" #nr "_interrupt:\n\t"		\
 	    "push $~(" #nr ") ; "		\
-	    "jmp common_interrupt");
+	    "jmp common_interrupt\n"		\
+	    ".previous");
 
 #define BI(x,y) \
 	BUILD_IRQ(x##y)
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index c0320599171..ff7d3b0124f 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -12,9 +12,13 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 
+struct dentry *arch_debugfs_dir;
+EXPORT_SYMBOL(arch_debugfs_dir);
+
 #ifdef CONFIG_DEBUG_BOOT_PARAMS
 struct setup_data_node {
 	u64 paddr;
@@ -135,6 +139,7 @@ static int __init create_setup_data_nodes(struct dentry *parent)
 		if (PageHighMem(pg)) {
 			data = ioremap_cache(pa_data, sizeof(*data));
 			if (!data) {
+				kfree(node);
 				error = -ENXIO;
 				goto err_dir;
 			}
@@ -209,6 +214,10 @@ static int __init arch_kdebugfs_init(void)
 {
 	int error = 0;
 
+	arch_debugfs_dir = debugfs_create_dir("x86", NULL);
+	if (!arch_debugfs_dir)
+		return -ENOMEM;
+
 #ifdef CONFIG_DEBUG_BOOT_PARAMS
 	error = boot_params_kdebugfs_init();
 #endif
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index f47f0eb886b..8282a213968 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -69,6 +69,9 @@ static int gdb_x86vector = -1;
  */
 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	gdb_regs[GDB_AX]	= regs->ax;
 	gdb_regs[GDB_BX]	= regs->bx;
 	gdb_regs[GDB_CX]	= regs->cx;
@@ -76,9 +79,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_SI]	= regs->si;
 	gdb_regs[GDB_DI]	= regs->di;
 	gdb_regs[GDB_BP]	= regs->bp;
-	gdb_regs[GDB_PS]	= regs->flags;
 	gdb_regs[GDB_PC]	= regs->ip;
 #ifdef CONFIG_X86_32
+	gdb_regs[GDB_PS]	= regs->flags;
 	gdb_regs[GDB_DS]	= regs->ds;
 	gdb_regs[GDB_ES]	= regs->es;
 	gdb_regs[GDB_CS]	= regs->cs;
@@ -94,6 +97,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[GDB_R13]	= regs->r13;
 	gdb_regs[GDB_R14]	= regs->r14;
 	gdb_regs[GDB_R15]	= regs->r15;
+	gdb_regs32[GDB_PS]	= regs->flags;
+	gdb_regs32[GDB_CS]	= regs->cs;
+	gdb_regs32[GDB_SS]	= regs->ss;
 #endif
 	gdb_regs[GDB_SP]	= regs->sp;
 }
@@ -112,6 +118,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
  */
 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	gdb_regs[GDB_AX]	= 0;
 	gdb_regs[GDB_BX]	= 0;
 	gdb_regs[GDB_CX]	= 0;
@@ -129,8 +138,10 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
 #else
-	gdb_regs[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
-	gdb_regs[GDB_PC]	= 0;
+	gdb_regs32[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
+	gdb_regs32[GDB_CS]	= __KERNEL_CS;
+	gdb_regs32[GDB_SS]	= __KERNEL_DS;
+	gdb_regs[GDB_PC]	= p->thread.ip;
 	gdb_regs[GDB_R8]	= 0;
 	gdb_regs[GDB_R9]	= 0;
 	gdb_regs[GDB_R10]	= 0;
@@ -153,6 +164,9 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
  */
 void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
+#ifndef CONFIG_X86_32
+	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
 	regs->ax		= gdb_regs[GDB_AX];
 	regs->bx		= gdb_regs[GDB_BX];
 	regs->cx		= gdb_regs[GDB_CX];
@@ -160,9 +174,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	regs->si		= gdb_regs[GDB_SI];
 	regs->di		= gdb_regs[GDB_DI];
 	regs->bp		= gdb_regs[GDB_BP];
-	regs->flags		= gdb_regs[GDB_PS];
 	regs->ip		= gdb_regs[GDB_PC];
 #ifdef CONFIG_X86_32
+	regs->flags		= gdb_regs[GDB_PS];
 	regs->ds		= gdb_regs[GDB_DS];
 	regs->es		= gdb_regs[GDB_ES];
 	regs->cs		= gdb_regs[GDB_CS];
@@ -175,6 +189,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	regs->r13		= gdb_regs[GDB_R13];
 	regs->r14		= gdb_regs[GDB_R14];
 	regs->r15		= gdb_regs[GDB_R15];
+	regs->flags		= gdb_regs32[GDB_PS];
+	regs->cs		= gdb_regs32[GDB_CS];
+	regs->ss		= gdb_regs32[GDB_SS];
 #endif
 }
 
@@ -378,10 +395,8 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 		if (remcomInBuffer[0] == 's') {
 			linux_regs->flags |= X86_EFLAGS_TF;
 			kgdb_single_step = 1;
-			if (kgdb_contthread) {
-				atomic_set(&kgdb_cpu_doing_single_step,
-					   raw_smp_processor_id());
-			}
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
 		}
 
 		get_debugreg(dr6, 6);
@@ -466,9 +481,15 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 
 	case DIE_DEBUG:
 		if (atomic_read(&kgdb_cpu_doing_single_step) ==
-			raw_smp_processor_id() &&
-			user_mode(regs))
-			return single_step_cont(regs, args);
+		    raw_smp_processor_id()) {
+			if (user_mode(regs))
+				return single_step_cont(regs, args);
+			break;
+		} else if (test_thread_flag(TIF_SINGLESTEP))
+			/* This means a user thread is single stepping
+			 * a system call which should be ignored
+			 */
+			return NOTIFY_DONE;
 		/* fall through */
 	default:
 		if (user_mode(regs))
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index b8c6743a13d..6c27679ec6a 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -431,7 +431,6 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->ip = (unsigned long)p->ainsn.insn;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -682,8 +681,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 	/* fixup registers */
 #ifdef CONFIG_X86_64
 	regs->cs = __KERNEL_CS;
@@ -732,7 +730,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -860,7 +858,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 
 	resume_execution(cur, regs, kcb);
 	regs->flags |= kcb->kprobe_saved_flags;
-	trace_hardirqs_fixup_flags(regs->flags);
 
 	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 87edf1ceb1d..d02def06ca9 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -113,7 +113,7 @@ static void kvm_setup_secondary_clock(void)
 #endif
 
 #ifdef CONFIG_SMP
-void __init kvm_smp_prepare_boot_cpu(void)
+static void __init kvm_smp_prepare_boot_cpu(void)
 {
 	WARN_ON(kvm_register_clock("primary cpu clock"));
 	native_smp_prepare_boot_cpu();
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index a8449571858..b68e21f06f4 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -62,12 +62,10 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 
 	if (reload) {
 #ifdef CONFIG_SMP
-		cpumask_t mask;
-
 		preempt_disable();
 		load_LDT(pc);
-		mask = cpumask_of_cpu(smp_processor_id());
-		if (!cpus_equal(current->mm->cpu_vm_mask, mask))
+		if (!cpus_equal(current->mm->cpu_vm_mask,
+				cpumask_of_cpu(smp_processor_id())))
 			smp_call_function(flush_ldt, current->mm, 1);
 		preempt_enable();
 #else
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 8864230d55a..0732adba05c 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/numa.h>
 #include <linux/ftrace.h>
+#include <linux/suspend.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -22,6 +23,7 @@
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 
 #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
 static u32 kexec_pgd[1024] PAGE_ALIGNED;
@@ -77,7 +79,7 @@ static void load_segments(void)
 /*
  * A architecture hook called to validate the
  * proposed image and prepare the control pages
- * as needed.  The pages for KEXEC_CONTROL_CODE_SIZE
+ * as needed.  The pages for KEXEC_CONTROL_PAGE_SIZE
  * have been allocated, but the segments have yet
  * been copied into the kernel.
  *
@@ -85,10 +87,12 @@ static void load_segments(void)
  * reboot code buffer to allow us to avoid allocations
  * later.
  *
- * Currently nothing.
+ * Make control page executable.
  */
 int machine_kexec_prepare(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_x(image->control_code_page, 1);
 	return 0;
 }
 
@@ -98,27 +102,54 @@ int machine_kexec_prepare(struct kimage *image)
  */
 void machine_kexec_cleanup(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_nx(image->control_code_page, 1);
 }
 
 /*
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
+	int save_ftrace_enabled;
+	asmlinkage unsigned long
+		(*relocate_kernel_ptr)(unsigned long indirection_page,
+				       unsigned long control_page,
+				       unsigned long start_address,
+				       unsigned int has_pae,
+				       unsigned int preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		save_processor_state();
+#endif
 
-	tracer_disable();
+	save_ftrace_enabled = __ftrace_enabled_save();
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
+	if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+		/* We need to put APICs in legacy mode so that we can
+		 * get timer interrupts in second kernel. kexec/kdump
+		 * paths already have calls to disable_IO_APIC() in
+		 * one form or other. kexec jump path also need
+		 * one.
+		 */
+		disable_IO_APIC();
+#endif
+	}
+
 	control_page = page_address(image->control_code_page);
-	memcpy(control_page, relocate_kernel, PAGE_SIZE);
+	memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
 
+	relocate_kernel_ptr = control_page;
 	page_list[PA_CONTROL_PAGE] = __pa(control_page);
-	page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
+	page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
 	page_list[PA_PGD] = __pa(kexec_pgd);
 	page_list[VA_PGD] = (unsigned long)kexec_pgd;
 #ifdef CONFIG_X86_PAE
@@ -131,6 +162,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
 	page_list[PA_PTE_1] = __pa(kexec_pte1);
 	page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
+	page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
 
 	/* The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
@@ -149,8 +181,17 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	set_idt(phys_to_virt(0),0);
 
 	/* now call it */
-	relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-			image->start, cpu_has_pae);
+	image->start = relocate_kernel_ptr((unsigned long)image->head,
+					   (unsigned long)page_list,
+					   image->start, cpu_has_pae,
+					   image->preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+	if (kexec_image->preserve_context)
+		restore_processor_state();
+#endif
+
+	__ftrace_enabled_restore(save_ftrace_enabled);
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 9dd9262693a..c43caa3a91f 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -181,7 +181,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 07c0f828f48..3b599518c32 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -33,6 +33,8 @@
 #include <linux/module.h>
 #include <asm/geode.h>
 
+#define MFGPT_DEFAULT_IRQ	7
+
 static struct mfgpt_timer_t {
 	unsigned int avail:1;
 } mfgpt_timers[MFGPT_MAX_TIMERS];
@@ -157,29 +159,48 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
 }
 EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
 
-int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
+int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
 {
-	u32 val, dummy;
-	int offset;
+	u32 zsel, lpc, dummy;
+	int shift;
 
 	if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
 		return -EIO;
 
-	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+	/*
+	 * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
+	 * is using the same CMP of the timer's Siamese twin, the IRQ is set to
+	 * 2, and we mustn't use nor change it.
+	 * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
+	 * IRQ of the 1st. This can only happen if forcing an IRQ, calling this
+	 * with *irq==0 is safe. Currently there _are_ no 2 drivers.
+	 */
+	rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
+	shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
+	if (((zsel >> shift) & 0xF) == 2)
 		return -EIO;
 
-	rdmsr(MSR_PIC_ZSEL_LOW, val, dummy);
+	/* Choose IRQ: if none supplied, keep IRQ already set or use default */
+	if (!*irq)
+		*irq = (zsel >> shift) & 0xF;
+	if (!*irq)
+		*irq = MFGPT_DEFAULT_IRQ;
 
-	offset = (timer % 4) * 4;
-
-	val &= ~((0xF << offset) | (0xF << (offset + 16)));
+	/* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
+	if (*irq < 1 || *irq == 2 || *irq > 15)
+		return -EIO;
+	rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
+	if (lpc & (1 << *irq))
+		return -EIO;
 
+	/* All chosen and checked - go for it */
+	if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+		return -EIO;
 	if (enable) {
-		val |= (irq & 0x0F) << (offset);
-		val |= (irq & 0x0F) << (offset + 16);
+		zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
+		wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
 	}
 
-	wrmsr(MSR_PIC_ZSEL_LOW, val, dummy);
 	return 0;
 }
 
@@ -242,7 +263,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
 static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
 static u16 mfgpt_event_clock;
 
-static int irq = 7;
+static int irq;
 static int __init mfgpt_setup(char *str)
 {
 	get_option(&str, &irq);
@@ -346,7 +367,7 @@ int __init mfgpt_timer_setup(void)
 	mfgpt_event_clock = timer;
 
 	/* Set up the IRQ on the MFGPT side */
-	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
+	if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
 		printk(KERN_ERR "mfgpt-timer:  Could not set up IRQ %d\n", irq);
 		return -EIO;
 	}
@@ -374,13 +395,14 @@ int __init mfgpt_timer_setup(void)
 			&mfgpt_clockevent);
 
 	printk(KERN_INFO
-	       "mfgpt-timer:  registering the MFGPT timer as a clock event.\n");
+	       "mfgpt-timer:  Registering MFGPT timer %d as a clock event, using IRQ %d\n",
+	       timer, irq);
 	clockevents_register_device(&mfgpt_clockevent);
 
 	return 0;
 
 err:
-	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
+	geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
 	printk(KERN_ERR
 	       "mfgpt-timer:  Unable to set up the MFGPT clock source\n");
 	return -EIO;
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 56b933119a0..652fa5c38eb 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -644,7 +644,9 @@ static void microcode_fini_cpu(int cpu)
 	mutex_unlock(&microcode_mutex);
 }
 
-static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
+static ssize_t reload_store(struct sys_device *dev,
+			    struct sysdev_attribute *attr,
+			    const char *buf, size_t sz)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 	char *end;
@@ -655,9 +657,7 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 	if (end == buf)
 		return -EINVAL;
 	if (val == 1) {
-		cpumask_t old;
-
-		old = current->cpus_allowed;
+		cpumask_t old = current->cpus_allowed;
 
 		get_online_cpus();
 		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
@@ -674,14 +674,16 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 	return sz;
 }
 
-static ssize_t version_show(struct sys_device *dev, char *buf)
+static ssize_t version_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
 	return sprintf(buf, "0x%x\n", uci->rev);
 }
 
-static ssize_t pf_show(struct sys_device *dev, char *buf)
+static ssize_t pf_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index fdfdc550b36..efc2f361fe8 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -238,7 +238,7 @@ static struct dmi_system_id __devinitdata mmconf_dmi_table[] = {
 	{}
 };
 
-void __init check_enable_amd_mmconf_dmi(void)
+void __cpuinit check_enable_amd_mmconf_dmi(void)
 {
 	dmi_check_system(mmconf_dmi_table);
 }
diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c
index a888e67f587..6ba87830d4b 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module_64.c
@@ -22,6 +22,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/bug.h>
 
@@ -150,7 +151,8 @@ int module_finalize(const Elf_Ehdr *hdr,
                     const Elf_Shdr *sechdrs,
                     struct module *me)
 {
-	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL;
+	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
+		*para = NULL;
 	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 
 	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
@@ -160,6 +162,8 @@ int module_finalize(const Elf_Ehdr *hdr,
 			alt = s;
 		if (!strcmp(".smp_locks", secstrings + s->sh_name))
 			locks= s;
+		if (!strcmp(".parainstructions", secstrings + s->sh_name))
+			para = s;
 	}
 
 	if (alt) {
@@ -175,6 +179,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 					    tseg, tseg + text->sh_size);
 	}
 
+	if (para) {
+		void *pseg = (void *)para->sh_addr;
+		apply_paravirt(pseg, pseg + para->sh_size);
+	}
+
 	return module_bug_finalize(hdr, sechdrs, me);
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 3b25e49380c..b3fb430725c 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -27,6 +27,7 @@
 #include <asm/bios_ebda.h>
 #include <asm/e820.h>
 #include <asm/trampoline.h>
+#include <asm/setup.h>
 
 #include <mach_apic.h>
 #ifdef CONFIG_X86_32
@@ -48,77 +49,7 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 	return sum & 0xFF;
 }
 
-#ifdef CONFIG_X86_NUMAQ
-int found_numaq;
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
-    __cpuinitdata;
-
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
-int mp_bus_id_to_node[MAX_MP_BUSSES];
-
-int mp_bus_id_to_local[MAX_MP_BUSSES];
-
-static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-static void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
-
-#endif
-
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
+static void __init MP_processor_info(struct mpc_config_processor *m)
 {
 	int apicid;
 	char *bootup_cpu = "";
@@ -127,14 +58,12 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 		disabled_cpus++;
 		return;
 	}
-#ifdef CONFIG_X86_NUMAQ
-	if (found_numaq)
-		apicid = mpc_apic_id(m, translation_table[mpc_record]);
+
+	if (x86_quirks->mpc_apic_id)
+		apicid = x86_quirks->mpc_apic_id(m);
 	else
 		apicid = m->mpc_apicid;
-#else
-	apicid = m->mpc_apicid;
-#endif
+
 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
 		bootup_cpu = " (Bootup-CPU)";
 		boot_cpu_physical_apicid = m->mpc_apicid;
@@ -151,12 +80,10 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 	memcpy(str, m->mpc_bustype, 6);
 	str[6] = 0;
 
-#ifdef CONFIG_X86_NUMAQ
-	if (found_numaq)
-		mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-#else
-	printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
-#endif
+	if (x86_quirks->mpc_oem_bus_info)
+		x86_quirks->mpc_oem_bus_info(m, str);
+	else
+		apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->mpc_busid, str);
 
 #if MAX_MP_BUSSES < 256
 	if (m->mpc_busid >= MAX_MP_BUSSES) {
@@ -173,10 +100,9 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
 #endif
 	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-#ifdef CONFIG_X86_NUMAQ
-		if (found_numaq)
-			mpc_oem_pci_bus(m, translation_table[mpc_record]);
-#endif
+		if (x86_quirks->mpc_oem_pci_bus)
+			x86_quirks->mpc_oem_pci_bus(m);
+
 		clear_bit(m->mpc_busid, mp_bus_not_pci);
 #if defined(CONFIG_EISA) || defined (CONFIG_MCA)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
@@ -228,7 +154,7 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
 
 static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
 {
-	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
@@ -237,7 +163,7 @@ static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
 
 static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq)
 {
-	printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
 		mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3,
 		(mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus,
@@ -309,90 +235,13 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
 
 static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
 {
-	printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x,"
+	apic_printk(APIC_VERBOSE, "Lint: type %d, pol %d, trig %d, bus %02x,"
 		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
 		m->mpc_irqtype, m->mpc_irqflag & 3,
 		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
 		m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
 }
 
-#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info(struct mpc_config_translation *m)
-{
-	printk(KERN_INFO
-	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
-	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
-	       m->trans_local);
-
-	if (mpc_record >= MAX_MPC_ENTRY)
-		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
-	else
-		translation_table[mpc_record] = m;	/* stash this for later */
-	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
-		node_set_online(m->trans_quad);
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
-				    unsigned short oemsize)
-{
-	int count = sizeof(*oemtable);	/* the header size */
-	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
-	mpc_record = 0;
-	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
-	       oemtable);
-	if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
-		printk(KERN_WARNING
-		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
-		       oemtable->oem_signature[0], oemtable->oem_signature[1],
-		       oemtable->oem_signature[2], oemtable->oem_signature[3]);
-		return;
-	}
-	if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
-		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
-		return;
-	}
-	while (count < oemtable->oem_length) {
-		switch (*oemptr) {
-		case MP_TRANSLATION:
-			{
-				struct mpc_config_translation *m =
-				    (struct mpc_config_translation *)oemptr;
-				MP_translation_info(m);
-				oemptr += sizeof(*m);
-				count += sizeof(*m);
-				++mpc_record;
-				break;
-			}
-		default:
-			{
-				printk(KERN_WARNING
-				       "Unrecognised OEM table entry type! - %d\n",
-				       (int)*oemptr);
-				return;
-			}
-		}
-	}
-}
-
-void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
-				 char *productid)
-{
-	if (strncmp(oem, "IBM NUMA", 8))
-		printk("Warning!  Not a NUMA-Q system!\n");
-	else
-		found_numaq = 1;
-
-	if (mpc->mpc_oemptr)
-		smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
-				 mpc->mpc_oemsize);
-}
-#endif /* CONFIG_X86_NUMAQ */
-
 /*
  * Read/parse the MPC
  */
@@ -457,7 +306,6 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 	} else
 		mps_oem_check(mpc, oem, str);
 #endif
-
 	/* save the local APIC address, it might be non-default */
 	if (!acpi_lapic)
 		mp_lapic_addr = mpc->mpc_lapic;
@@ -465,12 +313,17 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 	if (early)
 		return 1;
 
+	if (mpc->mpc_oemptr && x86_quirks->smp_read_mpc_oem) {
+		struct mp_config_oemtable *oem_table = (struct mp_config_oemtable *)(unsigned long)mpc->mpc_oemptr;
+		x86_quirks->smp_read_mpc_oem(oem_table, mpc->mpc_oemsize);
+	}
+
 	/*
 	 *      Now process the configuration blocks.
 	 */
-#ifdef CONFIG_X86_NUMAQ
-	mpc_record = 0;
-#endif
+	if (x86_quirks->mpc_record)
+		*x86_quirks->mpc_record = 0;
+
 	while (count < mpc->mpc_length) {
 		switch (*mpt) {
 		case MP_PROCESSOR:
@@ -536,9 +389,8 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 			count = mpc->mpc_length;
 			break;
 		}
-#ifdef CONFIG_X86_NUMAQ
-		++mpc_record;
-#endif
+		if (x86_quirks->mpc_record)
+			(*x86_quirks->mpc_record)++;
 	}
 
 #ifdef CONFIG_X86_GENERICARCH
@@ -632,7 +484,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 }
 
 
-static void construct_ioapic_table(int mpc_default_type)
+static void __init construct_ioapic_table(int mpc_default_type)
 {
 	struct mpc_config_ioapic ioapic;
 	struct mpc_config_bus bus;
@@ -677,7 +529,7 @@ static void construct_ioapic_table(int mpc_default_type)
 	construct_default_ioirq_mptable(mpc_default_type);
 }
 #else
-static inline void construct_ioapic_table(int mpc_default_type) { }
+static inline void __init construct_ioapic_table(int mpc_default_type) { }
 #endif
 
 static inline void __init construct_default_ISA_mptable(int mpc_default_type)
@@ -726,20 +578,14 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 static struct intel_mp_floating *mpf_found;
 
 /*
- * Machine specific quirk for finding the SMP config before other setup
- * activities destroy the table:
- */
-int (*mach_get_smp_config_quirk)(unsigned int early);
-
-/*
  * Scan the memory blocks for an SMP configuration block.
  */
 static void __init __get_smp_config(unsigned int early)
 {
 	struct intel_mp_floating *mpf = mpf_found;
 
-	if (mach_get_smp_config_quirk) {
-		if (mach_get_smp_config_quirk(early))
+	if (x86_quirks->mach_get_smp_config) {
+		if (x86_quirks->mach_get_smp_config(early))
 			return;
 	}
 	if (acpi_lapic && early)
@@ -849,7 +695,8 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	unsigned int *bp = phys_to_virt(base);
 	struct intel_mp_floating *mpf;
 
-	printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length);
+	apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
+			bp, length);
 	BUILD_BUG_ON(sizeof(*mpf) != 16);
 
 	while (length > 0) {
@@ -899,14 +746,12 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	return 0;
 }
 
-int (*mach_find_smp_config_quirk)(unsigned int reserve);
-
 static void __init __find_smp_config(unsigned int reserve)
 {
 	unsigned int address;
 
-	if (mach_find_smp_config_quirk) {
-		if (mach_find_smp_config_quirk(reserve))
+	if (x86_quirks->mach_find_smp_config) {
+		if (x86_quirks->mach_find_smp_config(reserve))
 			return;
 	}
 	/*
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index a153b3905f6..2e2af5d1819 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -72,21 +72,28 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 	u32 data[2];
 	u32 reg = *ppos;
 	int cpu = iminor(file->f_path.dentry->d_inode);
-	int err;
+	int err = 0;
+	ssize_t bytes = 0;
 
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
 
 	for (; count; count -= 8) {
 		err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
-		if (err)
-			return -EIO;
-		if (copy_to_user(tmp, &data, 8))
-			return -EFAULT;
+		if (err) {
+			if (err == -EFAULT) /* Fix idiotic error code */
+				err = -EIO;
+			break;
+		}
+		if (copy_to_user(tmp, &data, 8)) {
+			err = -EFAULT;
+			break;
+		}
 		tmp += 2;
+		bytes += 8;
 	}
 
-	return ((char __user *)tmp) - buf;
+	return bytes ? bytes : err;
 }
 
 static ssize_t msr_write(struct file *file, const char __user *buf,
@@ -96,21 +103,28 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 	u32 data[2];
 	u32 reg = *ppos;
 	int cpu = iminor(file->f_path.dentry->d_inode);
-	int err;
+	int err = 0;
+	ssize_t bytes = 0;
 
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
 
 	for (; count; count -= 8) {
-		if (copy_from_user(&data, tmp, 8))
-			return -EFAULT;
+		if (copy_from_user(&data, tmp, 8)) {
+			err = -EFAULT;
+			break;
+		}
 		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
-		if (err)
-			return -EIO;
+		if (err) {
+			if (err == -EFAULT) /* Fix idiotic error code */
+				err = -EIO;
+			break;
+		}
 		tmp += 2;
+		bytes += 8;
 	}
 
-	return ((char __user *)tmp) - buf;
+	return bytes ? bytes : err;
 }
 
 static int msr_open(struct inode *inode, struct file *file)
@@ -131,7 +145,7 @@ static int msr_open(struct inode *inode, struct file *file)
 		ret = -EIO;	/* MSR not supported */
 out:
 	unlock_kernel();
-	return 0;
+	return ret;
 }
 
 /*
@@ -149,8 +163,8 @@ static int __cpuinit msr_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
-			    "msr%d", cpu);
+	dev = device_create_drvdata(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
+				    NULL, "msr%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index ec024b3baad..abb78a2cc4a 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -114,6 +114,23 @@ static __init void nmi_cpu_busy(void *data)
 }
 #endif
 
+static void report_broken_nmi(int cpu, int *prev_nmi_count)
+{
+	printk(KERN_CONT "\n");
+
+	printk(KERN_WARNING
+		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+			cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
+
+	printk(KERN_WARNING
+		"Please report this to bugzilla.kernel.org,\n");
+	printk(KERN_WARNING
+		"and attach the output of the 'dmesg' command.\n");
+
+	per_cpu(wd_enabled, cpu) = 0;
+	atomic_dec(&nmi_active);
+}
+
 int __init check_nmi_watchdog(void)
 {
 	unsigned int *prev_nmi_count;
@@ -141,15 +158,8 @@ int __init check_nmi_watchdog(void)
 	for_each_online_cpu(cpu) {
 		if (!per_cpu(wd_enabled, cpu))
 			continue;
-		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
-			printk(KERN_WARNING "WARNING: CPU#%d: NMI "
-				"appears to be stuck (%d->%d)!\n",
-				cpu,
-				prev_nmi_count[cpu],
-				get_nmi_count(cpu));
-			per_cpu(wd_enabled, cpu) = 0;
-			atomic_dec(&nmi_active);
-		}
+		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
+			report_broken_nmi(cpu, prev_nmi_count);
 	}
 	endflag = 1;
 	if (!atomic_read(&nmi_active)) {
@@ -263,7 +273,7 @@ late_initcall(init_lapic_nmi_sysfs);
 
 static void __acpi_nmi_enable(void *__unused)
 {
-	apic_write_around(APIC_LVT0, APIC_DM_NMI);
+	apic_write(APIC_LVT0, APIC_DM_NMI);
 }
 
 /*
@@ -277,7 +287,7 @@ void acpi_nmi_enable(void)
 
 static void __acpi_nmi_disable(void *__unused)
 {
-	apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
 }
 
 /*
@@ -448,6 +458,13 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 
 #ifdef CONFIG_SYSCTL
 
+static int __init setup_unknown_nmi_panic(char *str)
+{
+	unknown_nmi_panic = 1;
+	return 1;
+}
+__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
+
 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
 {
 	unsigned char reason = get_nmi_reason();
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index a23e8233b9a..eecc8c18f01 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -33,6 +33,7 @@
 #include <asm/processor.h>
 #include <asm/mpspec.h>
 #include <asm/e820.h>
+#include <asm/setup.h>
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -71,6 +72,188 @@ static void __init smp_dump_qct(void)
 	}
 }
 
+
+void __cpuinit numaq_tsc_disable(void)
+{
+	if (!found_numaq)
+		return;
+
+	if (num_online_nodes() > 1) {
+		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+		setup_clear_cpu_cap(X86_FEATURE_TSC);
+	}
+}
+
+static int __init numaq_pre_time_init(void)
+{
+	numaq_tsc_disable();
+	return 0;
+}
+
+int found_numaq;
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_config_translation {
+	unsigned char mpc_type;
+	unsigned char trans_len;
+	unsigned char trans_type;
+	unsigned char trans_quad;
+	unsigned char trans_global;
+	unsigned char trans_local;
+	unsigned short trans_reserved;
+};
+
+/* x86_quirks member */
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
+    __cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+/* x86_quirks member */
+static int mpc_apic_id(struct mpc_config_processor *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+	       m->mpc_apicid,
+	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	       m->mpc_apicver, quad, logical_apicid);
+	return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+/* x86_quirks member */
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	mp_bus_id_to_node[m->mpc_busid] = quad;
+	mp_bus_id_to_local[m->mpc_busid] = local;
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+	       m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+
+/* x86_quirks member */
+static void mpc_oem_pci_bus(struct mpc_config_bus *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
+static void __init MP_translation_info(struct mpc_config_translation *m)
+{
+	printk(KERN_INFO
+	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+	       m->trans_local);
+
+	if (mpc_record >= MAX_MPC_ENTRY)
+		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+	else
+		translation_table[mpc_record] = m;	/* stash this for later */
+	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+		node_set_online(m->trans_quad);
+}
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+	int sum = 0;
+
+	while (len--)
+		sum += *mp++;
+
+	return sum & 0xFF;
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
+				    unsigned short oemsize)
+{
+	int count = sizeof(*oemtable);	/* the header size */
+	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+	mpc_record = 0;
+	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
+	       oemtable);
+	if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
+		printk(KERN_WARNING
+		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+		       oemtable->oem_signature[0], oemtable->oem_signature[1],
+		       oemtable->oem_signature[2], oemtable->oem_signature[3]);
+		return;
+	}
+	if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
+		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+		return;
+	}
+	while (count < oemtable->oem_length) {
+		switch (*oemptr) {
+		case MP_TRANSLATION:
+			{
+				struct mpc_config_translation *m =
+				    (struct mpc_config_translation *)oemptr;
+				MP_translation_info(m);
+				oemptr += sizeof(*m);
+				count += sizeof(*m);
+				++mpc_record;
+				break;
+			}
+		default:
+			{
+				printk(KERN_WARNING
+				       "Unrecognised OEM table entry type! - %d\n",
+				       (int)*oemptr);
+				return;
+			}
+		}
+	}
+}
+
+static struct x86_quirks numaq_x86_quirks __initdata = {
+	.arch_pre_time_init	= numaq_pre_time_init,
+	.arch_time_init		= NULL,
+	.arch_pre_intr_init	= NULL,
+	.arch_memory_setup	= NULL,
+	.arch_intr_init		= NULL,
+	.arch_trap_init		= NULL,
+	.mach_get_smp_config	= NULL,
+	.mach_find_smp_config	= NULL,
+	.mpc_record		= &mpc_record,
+	.mpc_apic_id		= mpc_apic_id,
+	.mpc_oem_bus_info	= mpc_oem_bus_info,
+	.mpc_oem_pci_bus	= mpc_oem_pci_bus,
+	.smp_read_mpc_oem	= smp_read_mpc_oem,
+};
+
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
+{
+	if (strncmp(oem, "IBM NUMA", 8))
+		printk("Warning!  Not a NUMA-Q system!\n");
+	else
+		found_numaq = 1;
+}
+
 static __init void early_check_numaq(void)
 {
 	/*
@@ -82,6 +265,9 @@ static __init void early_check_numaq(void)
 	 */
 	if (smp_found_config)
 		early_get_smp_config();
+
+	if (found_numaq)
+		x86_quirks = &numaq_x86_quirks;
 }
 
 int __init get_memcfg_numaq(void)
@@ -92,14 +278,3 @@ int __init get_memcfg_numaq(void)
 	smp_dump_qct();
 	return 1;
 }
-
-void __init numaq_tsc_disable(void)
-{
-	if (!found_numaq)
-		return;
-
-	if (num_online_nodes() > 1) {
-		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
-		setup_clear_cpu_cap(X86_FEATURE_TSC);
-	}
-}
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index e0f571d58c1..300da17e61c 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -29,6 +29,7 @@
 #include <asm/desc.h>
 #include <asm/setup.h>
 #include <asm/arch_hooks.h>
+#include <asm/pgtable.h>
 #include <asm/time.h>
 #include <asm/pgalloc.h>
 #include <asm/irq.h>
@@ -123,6 +124,7 @@ static void *get_call_destination(u8 type)
 		.pv_irq_ops = pv_irq_ops,
 		.pv_apic_ops = pv_apic_ops,
 		.pv_mmu_ops = pv_mmu_ops,
+		.pv_lock_ops = pv_lock_ops,
 	};
 	return *((void **)&tmpl + type);
 }
@@ -266,6 +268,17 @@ enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
 	return __get_cpu_var(paravirt_lazy_mode);
 }
 
+void __init paravirt_use_bytelocks(void)
+{
+#ifdef CONFIG_SMP
+	pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
+	pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
+	pv_lock_ops.spin_lock = __byte_spin_lock;
+	pv_lock_ops.spin_trylock = __byte_spin_trylock;
+	pv_lock_ops.spin_unlock = __byte_spin_unlock;
+#endif
+}
+
 struct pv_info pv_info = {
 	.name = "bare hardware",
 	.paravirt_enabled = 0,
@@ -361,7 +374,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
 	.apic_write = native_apic_write,
-	.apic_write_atomic = native_apic_write_atomic,
 	.apic_read = native_apic_read,
 	.setup_boot_clock = setup_boot_APIC_clock,
 	.setup_secondary_clock = setup_secondary_APIC_clock,
@@ -373,6 +385,9 @@ struct pv_mmu_ops pv_mmu_ops = {
 #ifndef CONFIG_X86_64
 	.pagetable_setup_start = native_pagetable_setup_start,
 	.pagetable_setup_done = native_pagetable_setup_done,
+#else
+	.pagetable_setup_start = paravirt_nop,
+	.pagetable_setup_done = paravirt_nop,
 #endif
 
 	.read_cr2 = native_read_cr2,
@@ -428,7 +443,7 @@ struct pv_mmu_ops pv_mmu_ops = {
 #endif /* PAGETABLE_LEVELS >= 3 */
 
 	.pte_val = native_pte_val,
-	.pte_flags = native_pte_val,
+	.pte_flags = native_pte_flags,
 	.pgd_val = native_pgd_val,
 
 	.make_pte = native_make_pte,
@@ -446,6 +461,18 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.set_fixmap = native_set_fixmap,
 };
 
+struct pv_lock_ops pv_lock_ops = {
+#ifdef CONFIG_SMP
+	.spin_is_locked = __ticket_spin_is_locked,
+	.spin_is_contended = __ticket_spin_is_contended,
+
+	.spin_lock = __ticket_spin_lock,
+	.spin_trylock = __ticket_spin_trylock,
+	.spin_unlock = __ticket_spin_unlock,
+#endif
+};
+EXPORT_SYMBOL(pv_lock_ops);
+
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
 EXPORT_SYMBOL    (pv_mmu_ops);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 6959b5c45df..dcdac6c826e 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -29,6 +29,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/crash_dump.h>
 #include <linux/dma-mapping.h>
 #include <linux/bitops.h>
 #include <linux/pci_ids.h>
@@ -36,7 +37,8 @@
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
-#include <asm/gart.h>
+
+#include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/tce.h>
 #include <asm/pci-direct.h>
@@ -167,6 +169,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl);
 static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
 static void calioc2_tce_cache_blast(struct iommu_table *tbl);
 static void calioc2_dump_error_regs(struct iommu_table *tbl);
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl);
+static void get_tce_space_from_tar(void);
 
 static struct cal_chipset_ops calgary_chip_ops = {
 	.handle_quirks = calgary_handle_quirks,
@@ -339,9 +343,8 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	/* were we called with bad_dma_address? */
 	badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
 	if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
-		printk(KERN_ERR "Calgary: driver tried unmapping bad DMA "
+		WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
 		       "address 0x%Lx\n", dma_addr);
-		WARN_ON(1);
 		return;
 	}
 
@@ -410,22 +413,6 @@ static void calgary_unmap_sg(struct device *dev,
 	}
 }
 
-static int calgary_nontranslate_map_sg(struct device* dev,
-	struct scatterlist *sg, int nelems, int direction)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nelems, i) {
-		struct page *p = sg_page(s);
-
-		BUG_ON(!p);
-		s->dma_address = virt_to_bus(sg_virt(s));
-		s->dma_length = s->length;
-	}
-	return nelems;
-}
-
 static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	int nelems, int direction)
 {
@@ -436,9 +423,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	unsigned long entry;
 	int i;
 
-	if (!translation_enabled(tbl))
-		return calgary_nontranslate_map_sg(dev, sg, nelems, direction);
-
 	for_each_sg(sg, s, nelems, i) {
 		BUG_ON(!sg_page(s));
 
@@ -474,7 +458,6 @@ error:
 static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	size_t size, int direction)
 {
-	dma_addr_t dma_handle = bad_dma_address;
 	void *vaddr = phys_to_virt(paddr);
 	unsigned long uaddr;
 	unsigned int npages;
@@ -483,12 +466,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	uaddr = (unsigned long)vaddr;
 	npages = num_dma_pages(uaddr, size);
 
-	if (translation_enabled(tbl))
-		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction);
-	else
-		dma_handle = virt_to_bus(vaddr);
-
-	return dma_handle;
+	return iommu_alloc(dev, tbl, vaddr, npages, direction);
 }
 
 static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
@@ -497,9 +475,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
 	struct iommu_table *tbl = find_iommu_table(dev);
 	unsigned int npages;
 
-	if (!translation_enabled(tbl))
-		return;
-
 	npages = num_dma_pages(dma_handle, size);
 	iommu_free(tbl, dma_handle, npages);
 }
@@ -522,18 +497,12 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
 		goto error;
 	memset(ret, 0, size);
 
-	if (translation_enabled(tbl)) {
-		/* set up tces to cover the allocated range */
-		mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
-		if (mapping == bad_dma_address)
-			goto free;
-
-		*dma_handle = mapping;
-	} else /* non translated slot */
-		*dma_handle = virt_to_bus(ret);
-
+	/* set up tces to cover the allocated range */
+	mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
+	if (mapping == bad_dma_address)
+		goto free;
+	*dma_handle = mapping;
 	return ret;
-
 free:
 	free_pages((unsigned long)ret, get_order(size));
 	ret = NULL;
@@ -541,7 +510,7 @@ error:
 	return ret;
 }
 
-static const struct dma_mapping_ops calgary_dma_ops = {
+static struct dma_mapping_ops calgary_dma_ops = {
 	.alloc_coherent = calgary_alloc_coherent,
 	.map_single = calgary_map_single,
 	.unmap_single = calgary_unmap_single,
@@ -830,7 +799,11 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)
 
 	tbl = pci_iommu(dev->bus);
 	tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
-	tce_free(tbl, 0, tbl->it_size);
+
+	if (is_kdump_kernel())
+		calgary_init_bitmap_from_tce_table(tbl);
+	else
+		tce_free(tbl, 0, tbl->it_size);
 
 	if (is_calgary(dev->device))
 		tbl->chip_ops = &calgary_chip_ops;
@@ -1209,6 +1182,10 @@ static int __init calgary_init(void)
 	if (ret)
 		return ret;
 
+	/* Purely for kdump kernel case */
+	if (is_kdump_kernel())
+		get_tce_space_from_tar();
+
 	do {
 		dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
 		if (!dev)
@@ -1230,6 +1207,16 @@ static int __init calgary_init(void)
 			goto error;
 	} while (1);
 
+	dev = NULL;
+	for_each_pci_dev(dev) {
+		struct iommu_table *tbl;
+
+		tbl = find_iommu_table(&dev->dev);
+
+		if (translation_enabled(tbl))
+			dev->dev.archdata.dma_ops = &calgary_dma_ops;
+	}
+
 	return ret;
 
 error:
@@ -1251,6 +1238,7 @@ error:
 		calgary_disable_translation(dev);
 		calgary_free_bus(dev);
 		pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
+		dev->dev.archdata.dma_ops = NULL;
 	} while (1);
 
 	return ret;
@@ -1280,13 +1268,15 @@ static inline int __init determine_tce_table_size(u64 ram)
 static int __init build_detail_arrays(void)
 {
 	unsigned long ptr;
-	int i, scal_detail_size, rio_detail_size;
+	unsigned numnodes, i;
+	int scal_detail_size, rio_detail_size;
 
-	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+	numnodes = rio_table_hdr->num_scal_dev;
+	if (numnodes > MAX_NUMNODES){
 		printk(KERN_WARNING
 			"Calgary: MAX_NUMNODES too low! Defined as %d, "
 			"but system has %d nodes.\n",
-			MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+			MAX_NUMNODES, numnodes);
 		return -ENODEV;
 	}
 
@@ -1307,8 +1297,7 @@ static int __init build_detail_arrays(void)
 	}
 
 	ptr = ((unsigned long)rio_table_hdr) + 3;
-	for (i = 0; i < rio_table_hdr->num_scal_dev;
-		    i++, ptr += scal_detail_size)
+	for (i = 0; i < numnodes; i++, ptr += scal_detail_size)
 		scal_devs[i] = (struct scal_detail *)ptr;
 
 	for (i = 0; i < rio_table_hdr->num_rio_dev;
@@ -1339,6 +1328,61 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
 	return (val != 0xffffffff);
 }
 
+/*
+ * calgary_init_bitmap_from_tce_table():
+ * Funtion for kdump case. In the second/kdump kernel initialize
+ * the bitmap based on the tce table entries obtained from first kernel
+ */
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
+{
+	u64 *tp;
+	unsigned int index;
+	tp = ((u64 *)tbl->it_base);
+	for (index = 0 ; index < tbl->it_size; index++) {
+		if (*tp != 0x0)
+			set_bit(index, tbl->it_map);
+		tp++;
+	}
+}
+
+/*
+ * get_tce_space_from_tar():
+ * Function for kdump case. Get the tce tables from first kernel
+ * by reading the contents of the base adress register of calgary iommu
+ */
+static void __init get_tce_space_from_tar(void)
+{
+	int bus;
+	void __iomem *target;
+	unsigned long tce_space;
+
+	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
+		struct calgary_bus_info *info = &bus_info[bus];
+		unsigned short pci_device;
+		u32 val;
+
+		val = read_pci_config(bus, 0, 0, 0);
+		pci_device = (val & 0xFFFF0000) >> 16;
+
+		if (!is_cal_pci_dev(pci_device))
+			continue;
+		if (info->translation_disabled)
+			continue;
+
+		if (calgary_bus_has_devices(bus, pci_device) ||
+						translate_empty_slots) {
+			target = calgary_reg(bus_info[bus].bbar,
+						tar_offset(bus));
+			tce_space = be64_to_cpu(readq(target));
+			tce_space = tce_space & TAR_SW_BITS;
+
+			tce_space = tce_space & (~specified_table_size);
+			info->tce_space = (u64 *)__va(tce_space);
+		}
+	}
+	return;
+}
+
 void __init detect_calgary(void)
 {
 	int bus;
@@ -1394,7 +1438,8 @@ void __init detect_calgary(void)
 		return;
 	}
 
-	specified_table_size = determine_tce_table_size(max_pfn * PAGE_SIZE);
+	specified_table_size = determine_tce_table_size((is_kdump_kernel() ?
+					saved_max_pfn : max_pfn) * PAGE_SIZE);
 
 	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
 		struct calgary_bus_info *info = &bus_info[bus];
@@ -1412,10 +1457,16 @@ void __init detect_calgary(void)
 
 		if (calgary_bus_has_devices(bus, pci_device) ||
 		    translate_empty_slots) {
-			tbl = alloc_tce_table();
-			if (!tbl)
-				goto cleanup;
-			info->tce_space = tbl;
+			/*
+			 * If it is kdump kernel, find and use tce tables
+			 * from first kernel, else allocate tce tables here
+			 */
+			if (!is_kdump_kernel()) {
+				tbl = alloc_tce_table();
+				if (!tbl)
+					goto cleanup;
+				info->tce_space = tbl;
+			}
 			calgary_found = 1;
 		}
 	}
@@ -1430,6 +1481,10 @@ void __init detect_calgary(void)
 		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
 		       "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
 		       debugging ? "enabled" : "disabled");
+
+		/* swiotlb for devices that aren't behind the Calgary. */
+		if (max_pfn > MAX_DMA32_PFN)
+			swiotlb = 1;
 	}
 	return;
 
@@ -1446,7 +1501,7 @@ int __init calgary_iommu_init(void)
 {
 	int ret;
 
-	if (no_iommu || swiotlb)
+	if (no_iommu || (swiotlb && !calgary_detected))
 		return -ENODEV;
 
 	if (!calgary_detected)
@@ -1459,15 +1514,14 @@ int __init calgary_iommu_init(void)
 	if (ret) {
 		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
 		       "falling back to no_iommu\n", ret);
-		if (max_pfn > MAX_DMA32_PFN)
-			printk(KERN_ERR "WARNING more than 4GB of memory, "
-					"32bit PCI may malfunction.\n");
 		return ret;
 	}
 
 	force_iommu = 1;
 	bad_dma_address = 0x0;
-	dma_ops = &calgary_dma_ops;
+	/* dma_ops is set to swiotlb or nommu */
+	if (!dma_ops)
+		dma_ops = &nommu_dma_ops;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 8467ec2320f..87d4d6964ec 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -5,14 +5,13 @@
 
 #include <asm/proto.h>
 #include <asm/dma.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/amd_iommu.h>
 
-int forbid_dac __read_mostly;
-EXPORT_SYMBOL(forbid_dac);
+static int forbid_dac __read_mostly;
 
-const struct dma_mapping_ops *dma_ops;
+struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static int iommu_sac_force __read_mostly;
@@ -114,22 +113,24 @@ void __init pci_iommu_alloc(void)
 	 * The order of these functions is important for
 	 * fall-back/fail-over reasons
 	 */
-#ifdef CONFIG_GART_IOMMU
 	gart_iommu_hole_init();
-#endif
 
-#ifdef CONFIG_CALGARY_IOMMU
 	detect_calgary();
-#endif
 
 	detect_intel_iommu();
 
 	amd_iommu_detect();
 
-#ifdef CONFIG_SWIOTLB
 	pci_swiotlb_init();
-#endif
 }
+
+unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+{
+	unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+	return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_num_pages);
 #endif
 
 /*
@@ -184,9 +185,7 @@ static __init int iommu_setup(char *p)
 			swiotlb = 1;
 #endif
 
-#ifdef CONFIG_GART_IOMMU
 		gart_parse_options(p);
-#endif
 
 #ifdef CONFIG_CALGARY_IOMMU
 		if (!strncmp(p, "calgary", 7))
@@ -201,136 +200,19 @@ static __init int iommu_setup(char *p)
 }
 early_param("iommu", iommu_setup);
 
-#ifdef CONFIG_X86_32
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if (!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pos, err;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1);
-
-	pages >>= PAGE_SHIFT;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
-static int dma_alloc_from_coherent_mem(struct device *dev, ssize_t size,
-				       dma_addr_t *dma_handle, void **ret)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-	int order = get_order(size);
-
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			*ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(*ret, 0, size);
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			*ret = NULL;
-	}
-	return (mem != NULL);
-}
-
-static int dma_release_coherent(struct device *dev, int order, void *vaddr)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-
-	if (mem && vaddr >= mem->virt_base && vaddr <
-		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-		return 1;
-	}
-	return 0;
-}
-#else
-#define dma_alloc_from_coherent_mem(dev, size, handle, ret) (0)
-#define dma_release_coherent(dev, order, vaddr) (0)
-#endif /* CONFIG_X86_32 */
-
 int dma_supported(struct device *dev, u64 mask)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 #ifdef CONFIG_PCI
 	if (mask > 0xffffffff && forbid_dac > 0) {
-		printk(KERN_INFO "PCI: Disallowing DAC for device %s\n",
-				 dev->bus_id);
+		dev_info(dev, "PCI: Disallowing DAC for device\n");
 		return 0;
 	}
 #endif
 
-	if (dma_ops->dma_supported)
-		return dma_ops->dma_supported(dev, mask);
+	if (ops->dma_supported)
+		return ops->dma_supported(dev, mask);
 
 	/* Copied from i386. Doesn't make much sense, because it will
 	   only work for pci_alloc_coherent.
@@ -351,8 +233,7 @@ int dma_supported(struct device *dev, u64 mask)
 	   type. Normally this doesn't make any difference, but gives
 	   more gentle handling of IOMMU overflow. */
 	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
-		printk(KERN_INFO "%s: Force SAC with mask %Lx\n",
-				 dev->bus_id, mask);
+		dev_info(dev, "Force SAC with mask %Lx\n", mask);
 		return 0;
 	}
 
@@ -378,6 +259,7 @@ void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		   gfp_t gfp)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
 	void *memory = NULL;
 	struct page *page;
 	unsigned long dma_mask = 0;
@@ -387,7 +269,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
 
-	if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
 		return memory;
 
 	if (!dev) {
@@ -446,8 +328,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 			/* Let low level make its own zone decisions */
 			gfp &= ~(GFP_DMA32|GFP_DMA);
 
-			if (dma_ops->alloc_coherent)
-				return dma_ops->alloc_coherent(dev, size,
+			if (ops->alloc_coherent)
+				return ops->alloc_coherent(dev, size,
 							   dma_handle, gfp);
 			return NULL;
 		}
@@ -459,14 +341,14 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		}
 	}
 
-	if (dma_ops->alloc_coherent) {
+	if (ops->alloc_coherent) {
 		free_pages((unsigned long)memory, get_order(size));
 		gfp &= ~(GFP_DMA|GFP_DMA32);
-		return dma_ops->alloc_coherent(dev, size, dma_handle, gfp);
+		return ops->alloc_coherent(dev, size, dma_handle, gfp);
 	}
 
-	if (dma_ops->map_simple) {
-		*dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory),
+	if (ops->map_simple) {
+		*dma_handle = ops->map_simple(dev, virt_to_phys(memory),
 					      size,
 					      PCI_DMA_BIDIRECTIONAL);
 		if (*dma_handle != bad_dma_address)
@@ -488,29 +370,27 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t bus)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	int order = get_order(size);
 	WARN_ON(irqs_disabled());	/* for portability */
-	if (dma_release_coherent(dev, order, vaddr))
+	if (dma_release_from_coherent(dev, order, vaddr))
 		return;
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, bus, size, 0);
+	if (ops->unmap_single)
+		ops->unmap_single(dev, bus, size, 0);
 	free_pages((unsigned long)vaddr, order);
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
 static int __init pci_iommu_init(void)
 {
-#ifdef CONFIG_CALGARY_IOMMU
 	calgary_iommu_init();
-#endif
 
 	intel_iommu_init();
 
 	amd_iommu_init();
 
-#ifdef CONFIG_GART_IOMMU
 	gart_iommu_init();
-#endif
 
 	no_iommu_init();
 	return 0;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c3fe78406d1..49285f8fd4d 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -32,6 +32,7 @@
 #include <asm/mtrr.h>
 #include <asm/pgtable.h>
 #include <asm/proto.h>
+#include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/cacheflush.h>
 #include <asm/swiotlb.h>
@@ -66,9 +67,6 @@ static u32 gart_unmapped_entry;
 	(((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT)
 #define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28))
 
-#define to_pages(addr, size) \
-	(round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
 #define EMERGENCY_PAGES 32 /* = 128KB */
 
 #ifdef CONFIG_AGP
@@ -197,9 +195,7 @@ static void iommu_full(struct device *dev, size_t size, int dir)
 	 * out. Hopefully no network devices use single mappings that big.
 	 */
 
-	printk(KERN_ERR
-		"PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n",
-		size, dev->bus_id);
+	dev_err(dev, "PCI-DMA: Out of IOMMU space for %lu bytes\n", size);
 
 	if (size > PAGE_SIZE*EMERGENCY_PAGES) {
 		if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)
@@ -242,7 +238,7 @@ nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
 static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 				size_t size, int dir)
 {
-	unsigned long npages = to_pages(phys_mem, size);
+	unsigned long npages = iommu_num_pages(phys_mem, size);
 	unsigned long iommu_page = alloc_iommu(dev, npages);
 	int i;
 
@@ -305,7 +301,7 @@ static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr,
 		return;
 
 	iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT;
-	npages = to_pages(dma_addr, size);
+	npages = iommu_num_pages(dma_addr, size);
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
 		CLEAR_LEAK(iommu_page + i);
@@ -388,7 +384,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
 		}
 
 		addr = phys_addr;
-		pages = to_pages(s->offset, s->length);
+		pages = iommu_num_pages(s->offset, s->length);
 		while (pages--) {
 			iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr);
 			SET_LEAK(iommu_page);
@@ -471,7 +467,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
 
 		seg_size += s->length;
 		need = nextneed;
-		pages += to_pages(s->offset, s->length);
+		pages += iommu_num_pages(s->offset, s->length);
 		ps = s;
 	}
 	if (dma_map_cont(dev, start_sg, i - start, sgmap, pages, need) < 0)
@@ -693,8 +689,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 extern int agp_amd64_init(void);
 
-static const struct dma_mapping_ops gart_dma_ops = {
-	.mapping_error			= NULL,
+static struct dma_mapping_ops gart_dma_ops = {
 	.map_single			= gart_map_single,
 	.map_simple			= gart_map_simple,
 	.unmap_single			= gart_unmap_single,
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index aec43d56f49..3f91f71cdc3 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -7,7 +7,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/processor.h>
 #include <asm/dma.h>
 
@@ -72,21 +72,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 	return nents;
 }
 
-/* Make sure we keep the same behaviour */
-static int nommu_mapping_error(dma_addr_t dma_addr)
-{
-#ifdef CONFIG_X86_32
-	return 0;
-#else
-	return (dma_addr == bad_dma_address);
-#endif
-}
-
-
-const struct dma_mapping_ops nommu_dma_ops = {
+struct dma_mapping_ops nommu_dma_ops = {
 	.map_single = nommu_map_single,
 	.map_sg = nommu_map_sg,
-	.mapping_error = nommu_mapping_error,
 	.is_phys = 1,
 };
 
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index 82299cd1d04..c4ce0332759 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -5,7 +5,7 @@
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
 
@@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size,
 	return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction);
 }
 
-const struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_mapping_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 4d629c62f4f..876e9189077 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -15,6 +15,7 @@ unsigned long idle_nomwait;
 EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
+static int force_mwait __cpuinitdata;
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
@@ -199,6 +200,7 @@ static void poll_idle(void)
  *
  * idle=mwait overrides this decision and forces the usage of mwait.
  */
+static int __cpuinitdata force_mwait;
 
 #define MWAIT_INFO			0x05
 #define MWAIT_ECX_EXTENDED_INFO		0x01
@@ -244,6 +246,14 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
 	return 1;
 }
 
+static cpumask_t c1e_mask = CPU_MASK_NONE;
+static int c1e_detected;
+
+void c1e_remove_cpu(int cpu)
+{
+	cpu_clear(cpu, c1e_mask);
+}
+
 /*
  * C1E aware idle routine. We check for C1E active in the interrupt
  * pending message MSR. If we detect C1E, then we handle it the same
@@ -251,9 +261,6 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
  */
 static void c1e_idle(void)
 {
-	static cpumask_t c1e_mask = CPU_MASK_NONE;
-	static int c1e_detected;
-
 	if (need_resched())
 		return;
 
@@ -263,8 +270,10 @@ static void c1e_idle(void)
 		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
 		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
 			c1e_detected = 1;
-			mark_tsc_unstable("TSC halt in C1E");
-			printk(KERN_INFO "System has C1E enabled\n");
+			if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+				mark_tsc_unstable("TSC halt in AMD C1E");
+			printk(KERN_INFO "System has AMD C1E enabled\n");
+			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
 		}
 	}
 
@@ -326,6 +335,9 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 
 static int __init idle_setup(char *str)
 {
+	if (!str)
+		return -EINVAL;
+
 	if (!strcmp(str, "poll")) {
 		printk("using polling idle threads.\n");
 		pm_idle = poll_idle;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 0c3927accb0..31f40b24bf5 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -55,6 +55,7 @@
 #include <asm/tlbflush.h>
 #include <asm/cpu.h>
 #include <asm/kdebug.h>
+#include <asm/idle.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
@@ -88,6 +89,7 @@ static void cpu_exit_clear(void)
 	cpu_clear(cpu, cpu_callin_map);
 
 	numa_remove_cpu(cpu);
+	c1e_remove_cpu(cpu);
 }
 
 /* We don't actually take CPU down, just spin without interrupts. */
@@ -95,7 +97,6 @@ static inline void play_dead(void)
 {
 	/* This must be done before dead CPU ack */
 	cpu_exit_clear();
-	wbinvd();
 	mb();
 	/* Ack it */
 	__get_cpu_var(cpu_state) = CPU_DEAD;
@@ -104,8 +105,8 @@ static inline void play_dead(void)
 	 * With physical CPU hotplug, we should halt the cpu
 	 */
 	local_irq_disable();
-	while (1)
-		halt();
+	/* mask all interrupts, flush any and all caches, and halt */
+	wbinvd_halt();
 }
 #else
 static inline void play_dead(void)
@@ -128,7 +129,7 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 
 			check_pgt_cache();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index a8e53626ac9..e12e0e4dd25 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -93,14 +93,15 @@ DECLARE_PER_CPU(int, cpu_state);
 static inline void play_dead(void)
 {
 	idle_task_exit();
-	wbinvd();
+	c1e_remove_cpu(raw_smp_processor_id());
+
 	mb();
 	/* Ack it */
 	__get_cpu_var(cpu_state) = CPU_DEAD;
 
 	local_irq_disable();
-	while (1)
-		halt();
+	/* mask all interrupts, flush any and all caches, and halt */
+	wbinvd_halt();
 }
 #else
 static inline void play_dead(void)
@@ -120,7 +121,7 @@ void cpu_idle(void)
 	current_thread_info()->status |= TS_POLLING;
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 
 			rmb();
@@ -537,8 +538,8 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
 struct task_struct *
 __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 {
-	struct thread_struct *prev = &prev_p->thread,
-				 *next = &next_p->thread;
+	struct thread_struct *prev = &prev_p->thread;
+	struct thread_struct *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 	unsigned fsindex, gsindex;
@@ -586,35 +587,34 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* 
 	 * Switch FS and GS.
+	 *
+	 * Segment register != 0 always requires a reload.  Also
+	 * reload when it has changed.  When prev process used 64bit
+	 * base always reload to avoid an information leak.
 	 */
-	{ 
-		/* segment register != 0 always requires a reload. 
-		   also reload when it has changed. 
-		   when prev process used 64bit base always reload
-		   to avoid an information leak. */
-		if (unlikely(fsindex | next->fsindex | prev->fs)) {
-			loadsegment(fs, next->fsindex);
-			/* check if the user used a selector != 0
-	                 * if yes clear 64bit base, since overloaded base
-                         * is always mapped to the Null selector
-                         */
-			if (fsindex)
+	if (unlikely(fsindex | next->fsindex | prev->fs)) {
+		loadsegment(fs, next->fsindex);
+		/* 
+		 * Check if the user used a selector != 0; if yes
+		 *  clear 64bit base, since overloaded base is always
+		 *  mapped to the Null selector
+		 */
+		if (fsindex)
 			prev->fs = 0;				
-		}
-		/* when next process has a 64bit base use it */
-		if (next->fs) 
-			wrmsrl(MSR_FS_BASE, next->fs); 
-		prev->fsindex = fsindex;
-
-		if (unlikely(gsindex | next->gsindex | prev->gs)) {
-			load_gs_index(next->gsindex);
-			if (gsindex)
+	}
+	/* when next process has a 64bit base use it */
+	if (next->fs)
+		wrmsrl(MSR_FS_BASE, next->fs);
+	prev->fsindex = fsindex;
+
+	if (unlikely(gsindex | next->gsindex | prev->gs)) {
+		load_gs_index(next->gsindex);
+		if (gsindex)
 			prev->gs = 0;				
-		}
-		if (next->gs)
-			wrmsrl(MSR_KERNEL_GS_BASE, next->gs); 
-		prev->gsindex = gsindex;
 	}
+	if (next->gs)
+		wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
+	prev->gsindex = gsindex;
 
 	/* Must be after DS reload */
 	unlazy_fpu(prev_p);
@@ -627,7 +627,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	write_pda(pcurrent, next_p); 
 
 	write_pda(kernelstack,
-	(unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
+		  (unsigned long)task_stack_page(next_p) +
+		  THREAD_SIZE - PDA_STACKOFFSET);
 #ifdef CONFIG_CC_STACKPROTECTOR
 	write_pda(stack_canary, next_p->stack_canary);
 	/*
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 77040b6070e..e37dccce85d 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1357,8 +1357,6 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-
 void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 {
 	struct siginfo info;
@@ -1377,89 +1375,10 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 	force_sig_info(SIGTRAP, &info, tsk);
 }
 
-/* notification of system call entry/exit
- * - triggered by current->work.syscall_trace
- */
-int do_syscall_trace(struct pt_regs *regs, int entryexit)
-{
-	int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU);
-	/*
-	 * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall
-	 * interception
-	 */
-	int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP);
-	int ret = 0;
-
-	/* do the secure computing check first */
-	if (!entryexit)
-		secure_computing(regs->orig_ax);
-
-	if (unlikely(current->audit_context)) {
-		if (entryexit)
-			audit_syscall_exit(AUDITSC_RESULT(regs->ax),
-						regs->ax);
-		/* Debug traps, when using PTRACE_SINGLESTEP, must be sent only
-		 * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is
-		 * not used, entry.S will call us only on syscall exit, not
-		 * entry; so when TIF_SYSCALL_AUDIT is used we must avoid
-		 * calling send_sigtrap() on syscall entry.
-		 *
-		 * Note that when PTRACE_SYSEMU_SINGLESTEP is used,
-		 * is_singlestep is false, despite his name, so we will still do
-		 * the correct thing.
-		 */
-		else if (is_singlestep)
-			goto out;
-	}
-
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-
-	/* If a process stops on the 1st tracepoint with SYSCALL_TRACE
-	 * and then is resumed with SYSEMU_SINGLESTEP, it will come in
-	 * here. We have to check this and return */
-	if (is_sysemu && entryexit)
-		return 0;
-
-	/* Fake a debug trap */
-	if (is_singlestep)
-		send_sigtrap(current, regs, 0);
-
- 	if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu)
-		goto out;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	/* Note that the debugger could change the result of test_thread_flag!*/
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-	ret = is_sysemu;
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_ax,
-				    regs->bx, regs->cx, regs->dx, regs->si);
-	if (ret == 0)
-		return 0;
-
-	regs->orig_ax = -1; /* force skip of syscall restarting */
-	if (unlikely(current->audit_context))
-		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
-	return 1;
-}
-
-#else  /* CONFIG_X86_64 */
-
 static void syscall_trace(struct pt_regs *regs)
 {
+	if (!(current->ptrace & PT_PTRACED))
+		return;
 
 #if 0
 	printk("trace %s ip %lx sp %lx ax %d origrax %d caller %lx tiflags %x ptrace %x\n",
@@ -1481,39 +1400,81 @@ static void syscall_trace(struct pt_regs *regs)
 	}
 }
 
-asmlinkage void syscall_trace_enter(struct pt_regs *regs)
+#ifdef CONFIG_X86_32
+# define IS_IA32	1
+#elif defined CONFIG_IA32_EMULATION
+# define IS_IA32	test_thread_flag(TIF_IA32)
+#else
+# define IS_IA32	0
+#endif
+
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+asmregparm long syscall_trace_enter(struct pt_regs *regs)
 {
+	long ret = 0;
+
+	/*
+	 * If we stepped into a sysenter/syscall insn, it trapped in
+	 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+	 * If user-mode had set TF itself, then it's still clear from
+	 * do_debug() and we need to set it again to restore the user
+	 * state.  If we entered on the slow path, TF was already set.
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		regs->flags |= X86_EFLAGS_TF;
+
 	/* do the secure computing check first */
 	secure_computing(regs->orig_ax);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
+	if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
+		ret = -1L;
+
+	if (ret || test_thread_flag(TIF_SYSCALL_TRACE))
 		syscall_trace(regs);
 
 	if (unlikely(current->audit_context)) {
-		if (test_thread_flag(TIF_IA32)) {
+		if (IS_IA32)
 			audit_syscall_entry(AUDIT_ARCH_I386,
 					    regs->orig_ax,
 					    regs->bx, regs->cx,
 					    regs->dx, regs->si);
-		} else {
+#ifdef CONFIG_X86_64
+		else
 			audit_syscall_entry(AUDIT_ARCH_X86_64,
 					    regs->orig_ax,
 					    regs->di, regs->si,
 					    regs->dx, regs->r10);
-		}
+#endif
 	}
+
+	return ret ?: regs->orig_ax;
 }
 
-asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+asmregparm void syscall_trace_leave(struct pt_regs *regs)
 {
 	if (unlikely(current->audit_context))
 		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		syscall_trace(regs);
-}
 
-#endif	/* CONFIG_X86_32 */
+	/*
+	 * If TIF_SYSCALL_EMU is set, we only get here because of
+	 * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP).
+	 * We already reported this syscall instruction in
+	 * syscall_trace_enter(), so don't do any more now.
+	 */
+	if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
+		return;
+
+	/*
+	 * If we are single-stepping, synthesize a trap to follow the
+	 * system call instruction.
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP) &&
+	    (current->ptrace & PT_PTRACED))
+		send_sigtrap(current, regs, 0);
+}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f8a62160e15..724adfc63cb 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -177,6 +177,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell T5400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T5400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
+		},
+	},
 	{	/* Handle problems with rebooting on HP laptops */
 		.callback = set_bios_reboot,
 		.ident = "HP Compaq Laptop",
@@ -403,10 +411,9 @@ void native_machine_shutdown(void)
 {
 	/* Stop the cpus and apics */
 #ifdef CONFIG_SMP
-	int reboot_cpu_id;
 
 	/* The boot cpu is always logical cpu 0 */
-	reboot_cpu_id = 0;
+	int reboot_cpu_id = 0;
 
 #ifdef CONFIG_X86_32
 	/* See if there has been given a command line override */
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index c30fe25d470..6f50664b2ba 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -20,11 +20,45 @@
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define PAE_PGD_ATTR (_PAGE_PRESENT)
 
+/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
+ */
+#define DATA(offset)		(KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
+
+/* Minimal CPU state */
+#define ESP			DATA(0x0)
+#define CR0			DATA(0x4)
+#define CR3			DATA(0x8)
+#define CR4			DATA(0xc)
+
+/* other data */
+#define CP_VA_CONTROL_PAGE	DATA(0x10)
+#define CP_PA_PGD		DATA(0x14)
+#define CP_PA_SWAP_PAGE		DATA(0x18)
+#define CP_PA_BACKUP_PAGES_MAP	DATA(0x1c)
+
 	.text
 	.align PAGE_SIZE
 	.globl relocate_kernel
 relocate_kernel:
-	movl	8(%esp), %ebp /* list of pages */
+	/* Save the CPU context, used for jumping back */
+
+	pushl	%ebx
+	pushl	%esi
+	pushl	%edi
+	pushl	%ebp
+	pushf
+
+	movl	20+8(%esp), %ebp /* list of pages */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%esp, ESP(%edi)
+	movl	%cr0, %eax
+	movl	%eax, CR0(%edi)
+	movl	%cr3, %eax
+	movl	%eax, CR3(%edi)
+	movl	%cr4, %eax
+	movl	%eax, CR4(%edi)
 
 #ifdef CONFIG_X86_PAE
 	/* map the control page at its virtual address */
@@ -138,15 +172,25 @@ relocate_kernel:
 
 relocate_new_kernel:
 	/* read the arguments and say goodbye to the stack */
-	movl  4(%esp), %ebx /* page_list */
-	movl  8(%esp), %ebp /* list of pages */
-	movl  12(%esp), %edx /* start address */
-	movl  16(%esp), %ecx /* cpu_has_pae */
+	movl  20+4(%esp), %ebx /* page_list */
+	movl  20+8(%esp), %ebp /* list of pages */
+	movl  20+12(%esp), %edx /* start address */
+	movl  20+16(%esp), %ecx /* cpu_has_pae */
+	movl  20+20(%esp), %esi /* preserve_context */
 
 	/* zero out flags, and disable interrupts */
 	pushl $0
 	popfl
 
+	/* save some information for jumping back */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%edi, CP_VA_CONTROL_PAGE(%edi)
+	movl	PTR(PA_PGD)(%ebp), %eax
+	movl	%eax, CP_PA_PGD(%edi)
+	movl	PTR(PA_SWAP_PAGE)(%ebp), %eax
+	movl	%eax, CP_PA_SWAP_PAGE(%edi)
+	movl	%ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
+
 	/* get physical address of control page now */
 	/* this is impossible after page table switch */
 	movl	PTR(PA_CONTROL_PAGE)(%ebp), %edi
@@ -197,8 +241,90 @@ identity_mapped:
 	xorl	%eax, %eax
 	movl	%eax, %cr3
 
+	movl	CP_PA_SWAP_PAGE(%edi), %eax
+	pushl	%eax
+	pushl	%ebx
+	call	swap_pages
+	addl	$8, %esp
+
+	/* To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB, it's handy, and not processor dependent.
+	 */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* set all of the registers to known values */
+	/* leave %esp alone */
+
+	testl	%esi, %esi
+	jnz 1f
+	xorl	%edi, %edi
+	xorl	%eax, %eax
+	xorl	%ebx, %ebx
+	xorl    %ecx, %ecx
+	xorl    %edx, %edx
+	xorl    %esi, %esi
+	xorl    %ebp, %ebp
+	ret
+1:
+	popl	%edx
+	movl	CP_PA_SWAP_PAGE(%edi), %esp
+	addl	$PAGE_SIZE, %esp
+2:
+	call	*%edx
+
+	/* get the re-entry point of the peer system */
+	movl	0(%esp), %ebp
+	call	1f
+1:
+	popl	%ebx
+	subl	$(1b - relocate_kernel), %ebx
+	movl	CP_VA_CONTROL_PAGE(%ebx), %edi
+	lea	PAGE_SIZE(%ebx), %esp
+	movl	CP_PA_SWAP_PAGE(%ebx), %eax
+	movl	CP_PA_BACKUP_PAGES_MAP(%ebx), %edx
+	pushl	%eax
+	pushl	%edx
+	call	swap_pages
+	addl	$8, %esp
+	movl	CP_PA_PGD(%ebx), %eax
+	movl	%eax, %cr3
+	movl	%cr0, %eax
+	orl	$(1<<31), %eax
+	movl	%eax, %cr0
+	lea	PAGE_SIZE(%edi), %esp
+	movl	%edi, %eax
+	addl	$(virtual_mapped - relocate_kernel), %eax
+	pushl	%eax
+	ret
+
+virtual_mapped:
+	movl	CR4(%edi), %eax
+	movl	%eax, %cr4
+	movl	CR3(%edi), %eax
+	movl	%eax, %cr3
+	movl	CR0(%edi), %eax
+	movl	%eax, %cr0
+	movl	ESP(%edi), %esp
+	movl	%ebp, %eax
+
+	popf
+	popl	%ebp
+	popl	%edi
+	popl	%esi
+	popl	%ebx
+	ret
+
 	/* Do the copies */
-	movl	%ebx, %ecx
+swap_pages:
+	movl	8(%esp), %edx
+	movl	4(%esp), %ecx
+	pushl	%ebp
+	pushl	%ebx
+	pushl	%edi
+	pushl	%esi
+	movl	%ecx, %ebx
 	jmp	1f
 
 0:	/* top, read another word from the indirection page */
@@ -226,27 +352,31 @@ identity_mapped:
 	movl    %ecx,   %esi /* For every source page do a copy */
 	andl    $0xfffff000, %esi
 
+	movl	%edi, %eax
+	movl	%esi, %ebp
+
+	movl	%edx, %edi
 	movl    $1024, %ecx
 	rep ; movsl
-	jmp     0b
-
-3:
 
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB, it's handy, and not processor dependent.
-	 */
-	xorl	%eax, %eax
-	movl	%eax, %cr3
+	movl	%ebp, %edi
+	movl	%eax, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	/* set all of the registers to known values */
-	/* leave %esp alone */
+	movl	%eax, %edi
+	movl	%edx, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	xorl	%eax, %eax
-	xorl	%ebx, %ebx
-	xorl    %ecx, %ecx
-	xorl    %edx, %edx
-	xorl    %esi, %esi
-	xorl    %edi, %edi
-	xorl    %ebp, %ebp
+	lea	PAGE_SIZE(%ebp), %esi
+	jmp     0b
+3:
+	popl	%esi
+	popl	%edi
+	popl	%ebx
+	popl	%ebp
 	ret
+
+	.globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 531b55b8e81..9838f2539df 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -57,12 +57,8 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/delay.h>
-#include <linux/highmem.h>
 
 #include <linux/kallsyms.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/kexec.h>
 #include <linux/cpufreq.h>
 #include <linux/dma-mapping.h>
 #include <linux/ctype.h>
@@ -96,7 +92,7 @@
 #include <asm/smp.h>
 #include <asm/desc.h>
 #include <asm/dma.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 
@@ -104,7 +100,6 @@
 #include <asm/paravirt.h>
 
 #include <asm/percpu.h>
-#include <asm/sections.h>
 #include <asm/topology.h>
 #include <asm/apicdef.h>
 #ifdef CONFIG_X86_64
@@ -450,7 +445,7 @@ static void __init reserve_early_setup_data(void)
  * @size: Size of the crashkernel memory to reserve.
  * Returns the base address on success, and -1ULL on failure.
  */
-unsigned long long find_and_reserve_crashkernel(unsigned long long size)
+unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
 {
 	const unsigned long long alignment = 16<<20; 	/* 16M */
 	unsigned long long start = 0LL;
@@ -579,6 +574,10 @@ static int __init setup_elfcorehdr(char *arg)
 early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
+static struct x86_quirks default_x86_quirks __initdata;
+
+struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -598,11 +597,11 @@ void __init setup_arch(char **cmdline_p)
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
 	pre_setup_arch_hook();
-	early_cpu_init();
 #else
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
+	early_cpu_init();
 	early_ioremap_init();
 
 	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
@@ -666,14 +665,23 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = virt_to_phys(&__bss_start);
 	bss_resource.end = virt_to_phys(&__bss_stop)-1;
 
-#ifdef CONFIG_X86_64
-	early_cpu_init();
-#endif
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
 	parse_early_param();
 
+#ifdef CONFIG_X86_64
+	check_efer();
+#endif
+
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+	/*
+	 * Must be before kernel pagetables are setup
+	 * or fixmap area is touched.
+	 */
+	vmi_init();
+#endif
+
 	/* after early param, so could get panic from serial */
 	reserve_early_setup_data();
 
@@ -681,7 +689,7 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_X86_LOCAL_APIC
 		disable_apic = 1;
 #endif
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+		setup_clear_cpu_cap(X86_FEATURE_APIC);
 	}
 
 #ifdef CONFIG_PCI
@@ -734,7 +742,6 @@ void __init setup_arch(char **cmdline_p)
 #else
 	num_physpages = max_pfn;
 
-	check_efer();
 
 	/* How many end-of-memory variables you have, grandma! */
 	/* need this before calling reserve_initrd */
@@ -792,10 +799,6 @@ void __init setup_arch(char **cmdline_p)
 
 	initmem_init(0, max_pfn);
 
-#ifdef CONFIG_X86_64
-	dma32_reserve_bootmem();
-#endif
-
 #ifdef CONFIG_ACPI_SLEEP
 	/*
 	 * Reserve low memory region for sleep support.
@@ -810,21 +813,25 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	reserve_crashkernel();
 
+#ifdef CONFIG_X86_64
+	/*
+	 * dma32_reserve_bootmem() allocates bootmem which may conflict
+	 * with the crashkernel command line, so do that after
+	 * reserve_crashkernel()
+	 */
+	dma32_reserve_bootmem();
+#endif
+
 	reserve_ibft_region();
 
 #ifdef CONFIG_KVM_CLOCK
 	kvmclock_init();
 #endif
 
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
-	/*
-	 * Must be after max_low_pfn is determined, and before kernel
-	 * pagetables are setup.
-	 */
-	vmi_init();
-#endif
-
+	paravirt_pagetable_setup_start(swapper_pg_dir);
 	paging_init();
+	paravirt_pagetable_setup_done(swapper_pg_dir);
+	paravirt_post_allocator_init();
 
 #ifdef CONFIG_X86_64
 	map_vsyscall();
@@ -854,23 +861,9 @@ void __init setup_arch(char **cmdline_p)
 	init_cpu_to_node();
 #endif
 
-#ifdef CONFIG_X86_NUMAQ
-	/*
-	 * need to check online nodes num, call it
-	 * here before time_init/tsc_init
-	 */
-	numaq_tsc_disable();
-#endif
-
 	init_apic_mappings();
 	ioapic_init_mappings();
 
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
-	if (def_to_bigsmp)
-		printk(KERN_WARNING "More than 8 CPUs detected and "
-			"CONFIG_X86_PC cannot handle it.\nUse "
-			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
-#endif
 	kvm_guest_init();
 
 	e820_reserve_resources();
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index cac68430d31..76e305e064f 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -80,24 +80,6 @@ static void __init setup_per_cpu_maps(void)
 #endif
 }
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-cpumask_t *cpumask_of_cpu_map __read_mostly;
-EXPORT_SYMBOL(cpumask_of_cpu_map);
-
-/* requires nr_cpu_ids to be initialized */
-static void __init setup_cpumask_of_cpu(void)
-{
-	int i;
-
-	/* alloc_bootmem zeroes memory */
-	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
-	for (i = 0; i < nr_cpu_ids; i++)
-		cpu_set(i, cpumask_of_cpu_map[i]);
-}
-#else
-static inline void setup_cpumask_of_cpu(void) { }
-#endif
-
 #ifdef CONFIG_X86_32
 /*
  * Great future not-so-futuristic plan: make i386 and x86_64 do it
@@ -197,9 +179,6 @@ void __init setup_per_cpu_areas(void)
 
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
-
-	/* Setup cpumask_of_cpu map */
-	setup_cpumask_of_cpu();
 }
 
 #endif
@@ -227,8 +206,8 @@ static void __init setup_node_to_cpumask_map(void)
 	/* allocate the map */
 	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
 
-	Dprintk(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
-		map, nr_node_ids);
+	pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
+		 map, nr_node_ids);
 
 	/* node_to_cpumask() will now work */
 	node_to_cpumask_map = map;
@@ -248,7 +227,7 @@ void __cpuinit numa_set_node(int cpu, int node)
 		per_cpu(x86_cpu_to_node_map, cpu) = node;
 
 	else
-		Dprintk(KERN_INFO "Setting node for non-present cpu %d\n", cpu);
+		pr_debug("Setting node for non-present cpu %d\n", cpu);
 }
 
 void __cpuinit numa_clear_node(int cpu)
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index d9237363096..6fb5bcdd893 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -212,7 +212,7 @@ asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
 
 badframe:
 	if (show_unhandled_signals && printk_ratelimit()) {
-		printk(KERN_INFO "%s%s[%d] bad frame in sigreturn frame:"
+		printk("%s%s[%d] bad frame in sigreturn frame:"
 			"%p ip:%lx sp:%lx oeax:%lx",
 		    task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
 		    current->comm, task_pid_nr(current), frame, regs->ip,
@@ -657,18 +657,9 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-	/* Pending single-step? */
-	if (thread_info_flags & _TIF_SINGLESTEP) {
-		regs->flags |= X86_EFLAGS_TF;
-		clear_thread_flag(TIF_SINGLESTEP);
-	}
-
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
 
-	if (thread_info_flags & _TIF_HRTICK_RESCHED)
-		hrtick_resched();
-
 	clear_thread_flag(TIF_IRET);
 }
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index e53b267662e..ca316b5b742 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -53,6 +53,68 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 	return do_sigaltstack(uss, uoss, regs->sp);
 }
 
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387(struct _fpstate __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
+			sizeof(tsk->thread.xstate->fxsave));
+
+	if ((unsigned long)buf % 16)
+		printk("save_i387: bad fpstate %p\n", buf);
+
+	if (!used_math())
+		return 0;
+	clear_used_math(); /* trigger finit */
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		err = save_i387_checking((struct i387_fxsave_struct __user *)
+					 buf);
+		if (err)
+			return err;
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		stts();
+	} else {
+		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+				   sizeof(struct i387_fxsave_struct)))
+			return -1;
+	}
+	return 1;
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+static inline int restore_i387(struct _fpstate __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err;
+
+	if (!used_math()) {
+		err = init_fpu(tsk);
+		if (err)
+			return err;
+	}
+
+	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+		clts();
+		task_thread_info(current)->status |= TS_USEDFPU;
+	}
+	err = restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+	if (unlikely(err)) {
+		/*
+		 * Encountered an error while doing the restore from the
+		 * user buffer, clear the fpu state.
+		 */
+		clear_fpu(tsk);
+		clear_used_math();
+	}
+	return err;
+}
 
 /*
  * Do a signal return; undo the signal stack.
@@ -487,12 +549,6 @@ static void do_signal(struct pt_regs *regs)
 void do_notify_resume(struct pt_regs *regs, void *unused,
 		      __u32 thread_info_flags)
 {
-	/* Pending single-step? */
-	if (thread_info_flags & _TIF_SINGLESTEP) {
-		regs->flags |= X86_EFLAGS_TF;
-		clear_thread_flag(TIF_SINGLESTEP);
-	}
-
 #ifdef CONFIG_X86_MCE
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
@@ -502,9 +558,6 @@ void do_notify_resume(struct pt_regs *regs, void *unused,
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
-
-	if (thread_info_flags & _TIF_HRTICK_RESCHED)
-		hrtick_resched();
 }
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 687376ab07e..7985c5b3f91 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -216,7 +216,7 @@ static void __cpuinit smp_callin(void)
 		panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
 					phys_id, cpuid);
 	}
-	Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
+	pr_debug("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
 
 	/*
 	 * STARTUP IPIs are fragile beasts as they might sometimes
@@ -251,7 +251,7 @@ static void __cpuinit smp_callin(void)
 	 * boards)
 	 */
 
-	Dprintk("CALLIN, before setup_local_APIC().\n");
+	pr_debug("CALLIN, before setup_local_APIC().\n");
 	smp_callin_clear_local_apic();
 	setup_local_APIC();
 	end_local_APIC_setup();
@@ -266,7 +266,7 @@ static void __cpuinit smp_callin(void)
 	local_irq_enable();
 	calibrate_delay();
 	local_irq_disable();
-	Dprintk("Stack at about %p\n", &cpuid);
+	pr_debug("Stack at about %p\n", &cpuid);
 
 	/*
 	 * Save our processor parameters
@@ -326,12 +326,16 @@ static void __cpuinit start_secondary(void *unused)
 	 * for which cpus receive the IPI. Holding this
 	 * lock helps us to not include this cpu in a currently in progress
 	 * smp_call_function().
+	 *
+	 * We need to hold vector_lock so there the set of online cpus
+	 * does not change while we are assigning vectors to cpus.  Holding
+	 * this lock ensures we don't half assign or remove an irq from a cpu.
 	 */
 	ipi_call_lock_irq();
-#ifdef CONFIG_X86_IO_APIC
-	setup_vector_irq(smp_processor_id());
-#endif
+	lock_vector_lock();
+	__setup_vector_irq(smp_processor_id());
 	cpu_set(smp_processor_id(), cpu_online_map);
+	unlock_vector_lock();
 	ipi_call_unlock_irq();
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 
@@ -438,7 +442,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 	cpu_set(cpu, cpu_sibling_setup_map);
 
 	if (smp_num_siblings > 1) {
-		for_each_cpu_mask(i, cpu_sibling_setup_map) {
+		for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
 			if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
 			    c->cpu_core_id == cpu_data(i).cpu_core_id) {
 				cpu_set(i, per_cpu(cpu_sibling_map, cpu));
@@ -461,7 +465,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 		return;
 	}
 
-	for_each_cpu_mask(i, cpu_sibling_setup_map) {
+	for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
 		if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
 		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
 			cpu_set(i, c->llc_shared_map);
@@ -513,7 +517,7 @@ static void impress_friends(void)
 	/*
 	 * Allow the user to impress friends.
 	 */
-	Dprintk("Before bogomips.\n");
+	pr_debug("Before bogomips.\n");
 	for_each_possible_cpu(cpu)
 		if (cpu_isset(cpu, cpu_callout_map))
 			bogosum += cpu_data(cpu).loops_per_jiffy;
@@ -523,7 +527,7 @@ static void impress_friends(void)
 		bogosum/(500000/HZ),
 		(bogosum/(5000/HZ))%100);
 
-	Dprintk("Before bogocount - setting activated=1.\n");
+	pr_debug("Before bogocount - setting activated=1.\n");
 }
 
 static inline void __inquire_remote_apic(int apicid)
@@ -546,8 +550,8 @@ static inline void __inquire_remote_apic(int apicid)
 			printk(KERN_CONT
 			       "a previous APIC delivery may have failed\n");
 
-		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-		apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
+		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+		apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
 
 		timeout = 0;
 		do {
@@ -579,29 +583,24 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 	int maxlvt;
 
 	/* Target chip */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
 
 	/* Boot on the stack */
 	/* Kick the second */
-	apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+	apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	/*
 	 * Give the other CPU some time to accept the IPI.
 	 */
 	udelay(200);
-	/*
-	 * Due to the Pentium erratum 3AP.
-	 */
 	maxlvt = lapic_get_maxlvt();
-	if (maxlvt > 3) {
-		apic_read_around(APIC_SPIV);
+	if (maxlvt > 3)			/* Due to the Pentium erratum 3AP.  */
 		apic_write(APIC_ESR, 0);
-	}
 	accept_status = (apic_read(APIC_ESR) & 0xEF);
-	Dprintk("NMI sent.\n");
+	pr_debug("NMI sent.\n");
 
 	if (send_status)
 		printk(KERN_ERR "APIC never delivered???\n");
@@ -625,42 +624,44 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 		return send_status;
 	}
 
+	maxlvt = lapic_get_maxlvt();
+
 	/*
 	 * Be paranoid about clearing APIC errors.
 	 */
 	if (APIC_INTEGRATED(apic_version[phys_apicid])) {
-		apic_read_around(APIC_SPIV);
-		apic_write(APIC_ESR, 0);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
+			apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
 	}
 
-	Dprintk("Asserting INIT.\n");
+	pr_debug("Asserting INIT.\n");
 
 	/*
 	 * Turn INIT on target chip
 	 */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 	/*
 	 * Send IPI
 	 */
-	apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
-				| APIC_DM_INIT);
+	apic_write(APIC_ICR,
+		   APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	mdelay(10);
 
-	Dprintk("Deasserting INIT.\n");
+	pr_debug("Deasserting INIT.\n");
 
 	/* Target chip */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 	/* Send IPI */
-	apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	mb();
@@ -687,55 +688,47 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	/*
 	 * Run STARTUP IPI loop.
 	 */
-	Dprintk("#startup loops: %d.\n", num_starts);
-
-	maxlvt = lapic_get_maxlvt();
+	pr_debug("#startup loops: %d.\n", num_starts);
 
 	for (j = 1; j <= num_starts; j++) {
-		Dprintk("Sending STARTUP #%d.\n", j);
-		apic_read_around(APIC_SPIV);
-		apic_write(APIC_ESR, 0);
+		pr_debug("Sending STARTUP #%d.\n", j);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
+			apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
-		Dprintk("After apic_write.\n");
+		pr_debug("After apic_write.\n");
 
 		/*
 		 * STARTUP IPI
 		 */
 
 		/* Target chip */
-		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 		/* Boot on the stack */
 		/* Kick the second */
-		apic_write_around(APIC_ICR, APIC_DM_STARTUP
-					| (start_eip >> 12));
+		apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12));
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
 		 */
 		udelay(300);
 
-		Dprintk("Startup point 1.\n");
+		pr_debug("Startup point 1.\n");
 
-		Dprintk("Waiting for send to finish...\n");
+		pr_debug("Waiting for send to finish...\n");
 		send_status = safe_apic_wait_icr_idle();
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
 		 */
 		udelay(200);
-		/*
-		 * Due to the Pentium erratum 3AP.
-		 */
-		if (maxlvt > 3) {
-			apic_read_around(APIC_SPIV);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
 			apic_write(APIC_ESR, 0);
-		}
 		accept_status = (apic_read(APIC_ESR) & 0xEF);
 		if (send_status || accept_status)
 			break;
 	}
-	Dprintk("After Startup.\n");
+	pr_debug("After Startup.\n");
 
 	if (send_status)
 		printk(KERN_ERR "APIC never delivered???\n");
@@ -763,12 +756,20 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 }
 
 #ifdef CONFIG_X86_64
+
+/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */
+static void __ref free_bootmem_pda(struct x8664_pda *oldpda)
+{
+	if (!after_bootmem)
+		free_bootmem((unsigned long)oldpda, sizeof(*oldpda));
+}
+
 /*
  * Allocate node local memory for the AP pda.
  *
  * Must be called after the _cpu_pda pointer table is initialized.
  */
-static int __cpuinit get_local_pda(int cpu)
+int __cpuinit get_local_pda(int cpu)
 {
 	struct x8664_pda *oldpda, *newpda;
 	unsigned long size = sizeof(struct x8664_pda);
@@ -791,8 +792,7 @@ static int __cpuinit get_local_pda(int cpu)
 
 	if (oldpda) {
 		memcpy(newpda, oldpda, size);
-		if (!after_bootmem)
-			free_bootmem((unsigned long)oldpda, size);
+		free_bootmem_pda(oldpda);
 	}
 
 	newpda->in_bootmem = 0;
@@ -886,7 +886,7 @@ do_rest:
 
 	if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
 
-		Dprintk("Setting warm reset code and vector.\n");
+		pr_debug("Setting warm reset code and vector.\n");
 
 		store_NMI_vector(&nmi_high, &nmi_low);
 
@@ -907,9 +907,9 @@ do_rest:
 		/*
 		 * allow APs to start initializing.
 		 */
-		Dprintk("Before Callout %d.\n", cpu);
+		pr_debug("Before Callout %d.\n", cpu);
 		cpu_set(cpu, cpu_callout_map);
-		Dprintk("After Callout %d.\n", cpu);
+		pr_debug("After Callout %d.\n", cpu);
 
 		/*
 		 * Wait 5s total for a response
@@ -922,10 +922,10 @@ do_rest:
 
 		if (cpu_isset(cpu, cpu_callin_map)) {
 			/* number CPUs logically, starting from 1 (BSP is 0) */
-			Dprintk("OK.\n");
+			pr_debug("OK.\n");
 			printk(KERN_INFO "CPU%d: ", cpu);
 			print_cpu_info(&cpu_data(cpu));
-			Dprintk("CPU has booted.\n");
+			pr_debug("CPU has booted.\n");
 		} else {
 			boot_error = 1;
 			if (*((volatile unsigned char *)trampoline_base)
@@ -970,7 +970,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
 	WARN_ON(irqs_disabled());
 
-	Dprintk("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
+	pr_debug("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
 
 	if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
 	    !physid_isset(apicid, phys_cpu_present_map)) {
@@ -982,7 +982,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 	 * Already booted CPU?
 	 */
 	if (cpu_isset(cpu, cpu_callin_map)) {
-		Dprintk("do_boot_cpu %d Already started\n", cpu);
+		pr_debug("do_boot_cpu %d Already started\n", cpu);
 		return -ENOSYS;
 	}
 
@@ -1009,7 +1009,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 	err = do_boot_cpu(apicid, cpu);
 #endif
 	if (err) {
-		Dprintk("do_boot_cpu failed %d\n", err);
+		pr_debug("do_boot_cpu failed %d\n", err);
 		return -EIO;
 	}
 
@@ -1055,6 +1055,34 @@ static __init void disable_smp(void)
 static int __init smp_sanity_check(unsigned max_cpus)
 {
 	preempt_disable();
+
+#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+	if (def_to_bigsmp && nr_cpu_ids > 8) {
+		unsigned int cpu;
+		unsigned nr;
+
+		printk(KERN_WARNING
+		       "More than 8 CPUs detected - skipping them.\n"
+		       "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
+
+		nr = 0;
+		for_each_present_cpu(cpu) {
+			if (nr >= 8)
+				cpu_clear(cpu, cpu_present_map);
+			nr++;
+		}
+
+		nr = 0;
+		for_each_possible_cpu(cpu) {
+			if (nr >= 8)
+				cpu_clear(cpu, cpu_possible_map);
+			nr++;
+		}
+
+		nr_cpu_ids = 8;
+	}
+#endif
+
 	if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
 		printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
 				    "by the BIOS.\n", hard_smp_processor_id());
@@ -1193,6 +1221,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	printk(KERN_INFO "CPU%d: ", 0);
 	print_cpu_info(&cpu_data(0));
 	setup_boot_clock();
+
+	if (is_uv_system())
+		uv_system_init();
 out:
 	preempt_enable();
 }
@@ -1213,7 +1244,7 @@ void __init native_smp_prepare_boot_cpu(void)
 
 void __init native_smp_cpus_done(unsigned int max_cpus)
 {
-	Dprintk("Boot done.\n");
+	pr_debug("Boot done.\n");
 
 	impress_friends();
 	smp_checks();
@@ -1230,7 +1261,7 @@ static void remove_siblinginfo(int cpu)
 	int sibling;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
 		cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
 		/*/
 		 * last thread sibling in this cpu core going down
@@ -1239,7 +1270,7 @@ static void remove_siblinginfo(int cpu)
 			cpu_data(sibling).booted_cores--;
 	}
 
-	for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
 		cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
 	cpus_clear(per_cpu(cpu_sibling_map, cpu));
 	cpus_clear(per_cpu(cpu_core_map, cpu));
@@ -1311,7 +1342,7 @@ static void __ref remove_cpu_from_maps(int cpu)
 	cpu_clear(cpu, cpu_callout_map);
 	cpu_clear(cpu, cpu_callin_map);
 	/* was set by cpu_init() */
-	clear_bit(cpu, (unsigned long *)&cpu_initialized);
+	cpu_clear(cpu, cpu_initialized);
 	numa_remove_cpu(cpu);
 }
 
@@ -1347,7 +1378,9 @@ int __cpu_disable(void)
 	remove_siblinginfo(cpu);
 
 	/* It's now safe to remove this processor from the online map */
+	lock_vector_lock();
 	remove_cpu_from_maps(cpu);
+	unlock_vector_lock();
 	fixup_irqs(cpu_online_map);
 	return 0;
 }
@@ -1381,16 +1414,3 @@ void __cpu_die(unsigned int cpu)
 	BUG();
 }
 #endif
-
-/*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
-static int __init parse_maxcpus(char *arg)
-{
-	extern unsigned int maxcpus;
-
-	maxcpus = simple_strtoul(arg, NULL, 0);
-	return 0;
-}
-early_param("maxcpus", parse_maxcpus);
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index 99941b37eca..397e309839d 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -8,18 +8,21 @@
 DEFINE_PER_CPU(unsigned long, this_cpu_off);
 EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 
-/* Initialize the CPU's GDT.  This is either the boot CPU doing itself
-   (still using the master per-cpu area), or a CPU doing it for a
-   secondary which will soon come up. */
+/*
+ * Initialize the CPU's GDT.  This is either the boot CPU doing itself
+ * (still using the master per-cpu area), or a CPU doing it for a
+ * secondary which will soon come up.
+ */
 __cpuinit void init_gdt(int cpu)
 {
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+	struct desc_struct gdt;
 
-	pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
-			__per_cpu_offset[cpu], 0xFFFFF,
+	pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF,
 			0x2 | DESCTYPE_S, 0x8);
+	gdt.s = 1;
 
-	gdt[GDT_ENTRY_PERCPU].s = 1;
+	write_gdt_entry(get_cpu_gdt_table(cpu),
+			GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
 
 	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
 	per_cpu(cpu_number, cpu) = cpu;
diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c
deleted file mode 100644
index 8b137891791..00000000000
--- a/arch/x86/kernel/smpcommon_32.c
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 92c20fee678..e8b9863ef8c 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -105,6 +105,20 @@ static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
 static int enable_single_step(struct task_struct *child)
 {
 	struct pt_regs *regs = task_pt_regs(child);
+	unsigned long oflags;
+
+	/*
+	 * If we stepped into a sysenter/syscall insn, it trapped in
+	 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+	 * If user-mode had set TF itself, then it's still clear from
+	 * do_debug() and we need to set it again to restore the user
+	 * state so we don't wrongly set TIF_FORCED_TF below.
+	 * If enable_single_step() was used last and that is what
+	 * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are
+	 * already set and our bookkeeping is fine.
+	 */
+	if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP)))
+		regs->flags |= X86_EFLAGS_TF;
 
 	/*
 	 * Always set TIF_SINGLESTEP - this guarantees that
@@ -113,11 +127,7 @@ static int enable_single_step(struct task_struct *child)
 	 */
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 
-	/*
-	 * If TF was already set, don't do anything else
-	 */
-	if (regs->flags & X86_EFLAGS_TF)
-		return 0;
+	oflags = regs->flags;
 
 	/* Set TF on the kernel stack.. */
 	regs->flags |= X86_EFLAGS_TF;
@@ -126,9 +136,22 @@ static int enable_single_step(struct task_struct *child)
 	 * ..but if TF is changed by the instruction we will trace,
 	 * don't mark it as being "us" that set it, so that we
 	 * won't clear it by hand later.
+	 *
+	 * Note that if we don't actually execute the popf because
+	 * of a signal arriving right now or suchlike, we will lose
+	 * track of the fact that it really was "us" that set it.
 	 */
-	if (is_setting_trap_flag(child, regs))
+	if (is_setting_trap_flag(child, regs)) {
+		clear_tsk_thread_flag(child, TIF_FORCED_TF);
 		return 0;
+	}
+
+	/*
+	 * If TF was already set, check whether it was us who set it.
+	 * If not, we should never attempt a block step.
+	 */
+	if (oflags & X86_EFLAGS_TF)
+		return test_tsk_thread_flag(child, TIF_FORCED_TF);
 
 	set_tsk_thread_flag(child, TIF_FORCED_TF);
 
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index adff5562f5f..d44395ff34c 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -326,3 +326,9 @@ ENTRY(sys_call_table)
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 059ca6ee59b..ffe3c664afc 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -129,6 +129,7 @@ void __init hpet_time_init(void)
  */
 void __init time_init(void)
 {
+	pre_time_init_hook();
 	tsc_init();
 	late_time_init = choose_time_init();
 }
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index d0fbb7712ab..8b8c0d6640f 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -17,6 +17,7 @@
 #include <asm/genapic.h>
 #include <asm/idle.h>
 #include <asm/tsc.h>
+#include <asm/irq_vectors.h>
 
 #include <mach_apic.h>
 
@@ -783,7 +784,7 @@ static int __init uv_bau_init(void)
 		uv_init_blade(blade, node, cur_cpu);
 		cur_cpu += uv_blade_nr_possible_cpus(blade);
 	}
-	set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+	alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
 	uv_enable_timeouts();
 
 	return 0;
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index 8a768973c4f..03df8e45e5a 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -58,6 +58,7 @@
 #include <asm/nmi.h>
 #include <asm/smp.h>
 #include <asm/io.h>
+#include <asm/traps.h>
 
 #include "mach_traps.h"
 
@@ -77,26 +78,6 @@ char ignore_fpu_irq;
 gate_desc idt_table[256]
 	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
 
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void alignment_check(void);
-asmlinkage void spurious_interrupt_bug(void);
-asmlinkage void machine_check(void);
-
 int panic_on_unrecovered_nmi;
 int kstack_depth_to_print = 24;
 static unsigned int code_bytes = 64;
@@ -256,7 +237,7 @@ static const struct stacktrace_ops print_trace_ops = {
 
 static void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *stack, unsigned long bp, char *log_lvl)
+		unsigned long *stack, unsigned long bp, char *log_lvl)
 {
 	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
 	printk("%s =======================\n", log_lvl);
@@ -383,6 +364,54 @@ int is_valid_bugaddr(unsigned long ip)
 	return ud2 == 0x0b0f;
 }
 
+static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+
+unsigned __kprobes long oops_begin(void)
+{
+	unsigned long flags;
+
+	oops_enter();
+
+	if (die_owner != raw_smp_processor_id()) {
+		console_verbose();
+		raw_local_irq_save(flags);
+		__raw_spin_lock(&die_lock);
+		die_owner = smp_processor_id();
+		die_nest_count = 0;
+		bust_spinlocks(1);
+	} else {
+		raw_local_irq_save(flags);
+	}
+	die_nest_count++;
+	return flags;
+}
+
+void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
+{
+	bust_spinlocks(0);
+	die_owner = -1;
+	add_taint(TAINT_DIE);
+	__raw_spin_unlock(&die_lock);
+	raw_local_irq_restore(flags);
+
+	if (!regs)
+		return;
+
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops)
+		panic("Fatal exception");
+
+	oops_exit();
+	do_exit(signr);
+}
+
 int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 {
 	unsigned short ss;
@@ -423,31 +452,9 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
  */
 void die(const char *str, struct pt_regs *regs, long err)
 {
-	static struct {
-		raw_spinlock_t lock;
-		u32 lock_owner;
-		int lock_owner_depth;
-	} die = {
-		.lock =			__RAW_SPIN_LOCK_UNLOCKED,
-		.lock_owner =		-1,
-		.lock_owner_depth =	0
-	};
-	unsigned long flags;
-
-	oops_enter();
-
-	if (die.lock_owner != raw_smp_processor_id()) {
-		console_verbose();
-		raw_local_irq_save(flags);
-		__raw_spin_lock(&die.lock);
-		die.lock_owner = smp_processor_id();
-		die.lock_owner_depth = 0;
-		bust_spinlocks(1);
-	} else {
-		raw_local_irq_save(flags);
-	}
+	unsigned long flags = oops_begin();
 
-	if (++die.lock_owner_depth < 3) {
+	if (die_nest_count < 3) {
 		report_bug(regs->ip, regs);
 
 		if (__die(str, regs, err))
@@ -456,26 +463,7 @@ void die(const char *str, struct pt_regs *regs, long err)
 		printk(KERN_EMERG "Recursive die() failure, output suppressed\n");
 	}
 
-	bust_spinlocks(0);
-	die.lock_owner = -1;
-	add_taint(TAINT_DIE);
-	__raw_spin_unlock(&die.lock);
-	raw_local_irq_restore(flags);
-
-	if (!regs)
-		return;
-
-	if (kexec_should_crash(current))
-		crash_kexec(regs);
-
-	if (in_interrupt())
-		panic("Fatal exception in interrupt");
-
-	if (panic_on_oops)
-		panic("Fatal exception");
-
-	oops_exit();
-	do_exit(SIGSEGV);
+	oops_end(flags, regs, SIGSEGV);
 }
 
 static inline void
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index 2696a683778..513caaca711 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -51,30 +51,10 @@
 #include <asm/pgalloc.h>
 #include <asm/proto.h>
 #include <asm/pda.h>
+#include <asm/traps.h>
 
 #include <mach_traps.h>
 
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void double_fault(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void alignment_check(void);
-asmlinkage void spurious_interrupt_bug(void);
-asmlinkage void machine_check(void);
-
 int panic_on_unrecovered_nmi;
 int kstack_depth_to_print = 12;
 static unsigned int code_bytes = 64;
@@ -355,17 +335,24 @@ static const struct stacktrace_ops print_trace_ops = {
 	.address = print_trace_address,
 };
 
-void show_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp)
+static void
+show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp, char *log_lvl)
 {
 	printk("\nCall Trace:\n");
-	dump_trace(task, regs, stack, bp, &print_trace_ops, NULL);
+	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
 	printk("\n");
 }
 
+void show_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp)
+{
+	show_trace_log_lvl(task, regs, stack, bp, "");
+}
+
 static void
-_show_stack(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp)
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, unsigned long bp, char *log_lvl)
 {
 	unsigned long *stack;
 	int i;
@@ -399,12 +386,12 @@ _show_stack(struct task_struct *task, struct pt_regs *regs,
 		printk(" %016lx", *stack++);
 		touch_nmi_watchdog();
 	}
-	show_trace(task, regs, sp, bp);
+	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
 
 void show_stack(struct task_struct *task, unsigned long *sp)
 {
-	_show_stack(task, NULL, sp, 0);
+	show_stack_log_lvl(task, NULL, sp, 0, "");
 }
 
 /*
@@ -454,7 +441,8 @@ void show_registers(struct pt_regs *regs)
 		u8 *ip;
 
 		printk("Stack: ");
-		_show_stack(NULL, regs, (unsigned long *)sp, regs->bp);
+		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
+				regs->bp, "");
 		printk("\n");
 
 		printk(KERN_EMERG "Code: ");
@@ -518,7 +506,7 @@ unsigned __kprobes long oops_begin(void)
 }
 
 void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
-{ 
+{
 	die_owner = -1;
 	bust_spinlocks(0);
 	die_nest_count--;
@@ -1143,7 +1131,14 @@ asmlinkage void math_state_restore(void)
 	}
 
 	clts();				/* Allow maths ops (or we recurse) */
-	restore_fpu_checking(&me->thread.xstate->fxsave);
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(&me->thread.xstate->fxsave))) {
+		stts();
+		force_sig(SIGSEGV, me);
+		return;
+	}
 	task_thread_info(me)->status |= TS_USEDFPU;
 	me->fpu_counter++;
 }
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 7603c055390..8f98e9de1b8 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -104,7 +104,7 @@ __setup("notsc", notsc_setup);
 /*
  * Read TSC and the reference counters. Take care of SMI disturbance
  */
-static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+static u64 tsc_read_refs(u64 *pm, u64 *hpet)
 {
 	u64 t1, t2;
 	int i;
@@ -122,80 +122,216 @@ static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
 	return ULLONG_MAX;
 }
 
-/**
- * native_calibrate_tsc - calibrate the tsc on boot
+/*
+ * Try to calibrate the TSC against the Programmable
+ * Interrupt Timer and return the frequency of the TSC
+ * in kHz.
+ *
+ * Return ULONG_MAX on failure to calibrate.
  */
-unsigned long native_calibrate_tsc(void)
+static unsigned long pit_calibrate_tsc(void)
 {
-	unsigned long flags;
-	u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
-	int hpet = is_hpet_enabled();
-	unsigned int tsc_khz_val = 0;
-
-	local_irq_save(flags);
-
-	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+	u64 tsc, t1, t2, delta;
+	unsigned long tscmin, tscmax;
+	int pitcnt;
 
+	/* Set the Gate high, disable speaker */
 	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
 
+	/*
+	 * Setup CTC channel 2* for mode 0, (interrupt on terminal
+	 * count mode), binary count. Set the latch register to 50ms
+	 * (LSB then MSB) to begin countdown.
+	 */
 	outb(0xb0, 0x43);
 	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
 	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-	tr1 = get_cycles();
-	while ((inb(0x61) & 0x20) == 0);
-	tr2 = get_cycles();
 
-	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+	tsc = t1 = t2 = get_cycles();
 
-	local_irq_restore(flags);
+	pitcnt = 0;
+	tscmax = 0;
+	tscmin = ULONG_MAX;
+	while ((inb(0x61) & 0x20) == 0) {
+		t2 = get_cycles();
+		delta = t2 - tsc;
+		tsc = t2;
+		if ((unsigned long) delta < tscmin)
+			tscmin = (unsigned int) delta;
+		if ((unsigned long) delta > tscmax)
+			tscmax = (unsigned int) delta;
+		pitcnt++;
+	}
 
 	/*
-	 * Preset the result with the raw and inaccurate PIT
-	 * calibration value
+	 * Sanity checks:
+	 *
+	 * If we were not able to read the PIT more than 5000
+	 * times, then we have been hit by a massive SMI
+	 *
+	 * If the maximum is 10 times larger than the minimum,
+	 * then we got hit by an SMI as well.
 	 */
-	delta = (tr2 - tr1);
+	if (pitcnt < 5000 || tscmax > 10 * tscmin)
+		return ULONG_MAX;
+
+	/* Calculate the PIT value */
+	delta = t2 - t1;
 	do_div(delta, 50);
-	tsc_khz_val = delta;
+	return delta;
+}
+
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+	u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
+	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
+	unsigned long flags;
+	int hpet = is_hpet_enabled(), i;
+
+	/*
+	 * Run 5 calibration loops to get the lowest frequency value
+	 * (the best estimate). We use two different calibration modes
+	 * here:
+	 *
+	 * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
+	 * load a timeout of 50ms. We read the time right after we
+	 * started the timer and wait until the PIT count down reaches
+	 * zero. In each wait loop iteration we read the TSC and check
+	 * the delta to the previous read. We keep track of the min
+	 * and max values of that delta. The delta is mostly defined
+	 * by the IO time of the PIT access, so we can detect when a
+	 * SMI/SMM disturbance happend between the two reads. If the
+	 * maximum time is significantly larger than the minimum time,
+	 * then we discard the result and have another try.
+	 *
+	 * 2) Reference counter. If available we use the HPET or the
+	 * PMTIMER as a reference to check the sanity of that value.
+	 * We use separate TSC readouts and check inside of the
+	 * reference read for a SMI/SMM disturbance. We dicard
+	 * disturbed values here as well. We do that around the PIT
+	 * calibration delay loop as we have to wait for a certain
+	 * amount of time anyway.
+	 */
+	for (i = 0; i < 5; i++) {
+		unsigned long tsc_pit_khz;
+
+		/*
+		 * Read the start value and the reference count of
+		 * hpet/pmtimer when available. Then do the PIT
+		 * calibration, which will take at least 50ms, and
+		 * read the end value.
+		 */
+		local_irq_save(flags);
+		tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+		tsc_pit_khz = pit_calibrate_tsc();
+		tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+		local_irq_restore(flags);
+
+		/* Pick the lowest PIT TSC calibration so far */
+		tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
+
+		/* hpet or pmtimer available ? */
+		if (!hpet && !pm1 && !pm2)
+			continue;
+
+		/* Check, whether the sampling was disturbed by an SMI */
+		if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
+			continue;
+
+		tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+		if (hpet) {
+			if (hpet2 < hpet1)
+				hpet2 += 0x100000000ULL;
+			hpet2 -= hpet1;
+			tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+			do_div(tsc1, 1000000);
+		} else {
+			if (pm2 < pm1)
+				pm2 += (u64)ACPI_PM_OVRRUN;
+			pm2 -= pm1;
+			tsc1 = pm2 * 1000000000LL;
+			do_div(tsc1, PMTMR_TICKS_PER_SEC);
+		}
+
+		do_div(tsc2, tsc1);
+		tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+	}
+
+	/*
+	 * Now check the results.
+	 */
+	if (tsc_pit_min == ULONG_MAX) {
+		/* PIT gave no useful value */
+		printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
+
+		/* We don't have an alternative source, disable TSC */
+		if (!hpet && !pm1 && !pm2) {
+			printk("TSC: No reference (HPET/PMTIMER) available\n");
+			return 0;
+		}
+
+		/* The alternative source failed as well, disable TSC */
+		if (tsc_ref_min == ULONG_MAX) {
+			printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
+			       "failed due to SMI disturbance.\n");
+			return 0;
+		}
+
+		/* Use the alternative source */
+		printk(KERN_INFO "TSC: using %s reference calibration\n",
+		       hpet ? "HPET" : "PMTIMER");
+
+		return tsc_ref_min;
+	}
 
-	/* hpet or pmtimer available ? */
+	/* We don't have an alternative source, use the PIT calibration value */
 	if (!hpet && !pm1 && !pm2) {
-		printk(KERN_INFO "TSC calibrated against PIT\n");
-		goto out;
+		printk(KERN_INFO "TSC: Using PIT calibration value\n");
+		return tsc_pit_min;
 	}
 
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
-		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
-				"using PIT calibration result\n");
-		goto out;
+	/* The alternative source failed, use the PIT calibration value */
+	if (tsc_ref_min == ULONG_MAX) {
+		printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due "
+		       "to SMI disturbance. Using PIT calibration\n");
+		return tsc_pit_min;
 	}
 
-	tsc2 = (tsc2 - tsc1) * 1000000LL;
-
-	if (hpet) {
-		printk(KERN_INFO "TSC calibrated against HPET\n");
-		if (hpet2 < hpet1)
-			hpet2 += 0x100000000ULL;
-		hpet2 -= hpet1;
-		tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
-		do_div(tsc1, 1000000);
-	} else {
-		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
-		if (pm2 < pm1)
-			pm2 += (u64)ACPI_PM_OVRRUN;
-		pm2 -= pm1;
-		tsc1 = pm2 * 1000000000LL;
-		do_div(tsc1, PMTMR_TICKS_PER_SEC);
+	/* Check the reference deviation */
+	delta = ((u64) tsc_pit_min) * 100;
+	do_div(delta, tsc_ref_min);
+
+	/*
+	 * If both calibration results are inside a 5% window, the we
+	 * use the lower frequency of those as it is probably the
+	 * closest estimate.
+	 */
+	if (delta >= 95 && delta <= 105) {
+		printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n",
+		       hpet ? "HPET" : "PMTIMER");
+		printk(KERN_INFO "TSC: using %s calibration value\n",
+		       tsc_pit_min <= tsc_ref_min ? "PIT" :
+		       hpet ? "HPET" : "PMTIMER");
+		return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min;
 	}
 
-	do_div(tsc2, tsc1);
-	tsc_khz_val = tsc2;
+	printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+	       hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
 
-out:
-	return tsc_khz_val;
+	/*
+	 * The calibration values differ too much. In doubt, we use
+	 * the PIT value as we know that there are PMTIMERs around
+	 * running at double speed.
+	 */
+	printk(KERN_INFO "TSC: Using PIT calibration value\n");
+	return tsc_pit_min;
 }
 
-
 #ifdef CONFIG_X86_32
 /* Only called from the Powernow K7 cpu freq driver */
 int recalibrate_cpu_khz(void)
@@ -314,7 +450,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 			mark_tsc_unstable("cpufreq changes");
 	}
 
-	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
+	set_cyc2ns_scale(tsc_khz, freq->cpu);
 
 	return 0;
 }
@@ -325,6 +461,10 @@ static struct notifier_block time_cpufreq_notifier_block = {
 
 static int __init cpufreq_tsc(void)
 {
+	if (!cpu_has_tsc)
+		return 0;
+	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		return 0;
 	cpufreq_register_notifier(&time_cpufreq_notifier_block,
 				CPUFREQ_TRANSITION_NOTIFIER);
 	return 0;
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 0577825cf89..9ffb01c31c4 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -88,11 +88,9 @@ static __cpuinit void check_tsc_warp(void)
 			__raw_spin_unlock(&sync_lock);
 		}
 	}
-	if (!(now-start)) {
-		printk("Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
+	WARN(!(now-start),
+		"Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
 			now-start, end-start);
-		WARN_ON(1);
-	}
 }
 
 /*
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index e94bdb6add1..594ef47f0a6 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -73,7 +73,7 @@ int is_visws_box(void)
 	return visws_board_type >= 0;
 }
 
-static int __init visws_time_init_quirk(void)
+static int __init visws_time_init(void)
 {
 	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
 
@@ -93,7 +93,7 @@ static int __init visws_time_init_quirk(void)
 	return 0;
 }
 
-static int __init visws_pre_intr_init_quirk(void)
+static int __init visws_pre_intr_init(void)
 {
 	init_VISWS_APIC_irqs();
 
@@ -114,7 +114,7 @@ EXPORT_SYMBOL(sgivwfb_mem_size);
 
 long long mem_size __initdata = 0;
 
-static char * __init visws_memory_setup_quirk(void)
+static char * __init visws_memory_setup(void)
 {
 	long long gfx_mem_size = 8 * MB;
 
@@ -176,7 +176,7 @@ static void visws_machine_power_off(void)
 	outl(PIIX_SPECIAL_STOP, 0xCFC);
 }
 
-static int __init visws_get_smp_config_quirk(unsigned int early)
+static int __init visws_get_smp_config(unsigned int early)
 {
 	/*
 	 * Prevent MP-table parsing by the generic code:
@@ -184,15 +184,13 @@ static int __init visws_get_smp_config_quirk(unsigned int early)
 	return 1;
 }
 
-extern unsigned int __cpuinitdata maxcpus;
-
 /*
  * The Visual Workstation is Intel MP compliant in the hardware
  * sense, but it doesn't have a BIOS(-configuration table).
  * No problem for Linux.
  */
 
-static void __init MP_processor_info (struct mpc_config_processor *m)
+static void __init MP_processor_info(struct mpc_config_processor *m)
 {
 	int ver, logical_apicid;
 	physid_mask_t apic_cpus;
@@ -232,7 +230,7 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 	apic_version[m->mpc_apicid] = ver;
 }
 
-int __init visws_find_smp_config_quirk(unsigned int reserve)
+static int __init visws_find_smp_config(unsigned int reserve)
 {
 	struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
 	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
@@ -244,8 +242,8 @@ int __init visws_find_smp_config_quirk(unsigned int reserve)
 		ncpus = CO_CPU_MAX;
 	}
 
-	if (ncpus > maxcpus)
-		ncpus = maxcpus;
+	if (ncpus > setup_max_cpus)
+		ncpus = setup_max_cpus;
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	smp_found_config = 1;
@@ -258,7 +256,17 @@ int __init visws_find_smp_config_quirk(unsigned int reserve)
 	return 1;
 }
 
-extern int visws_trap_init_quirk(void);
+static int visws_trap_init(void);
+
+static struct x86_quirks visws_x86_quirks __initdata = {
+	.arch_time_init		= visws_time_init,
+	.arch_pre_intr_init	= visws_pre_intr_init,
+	.arch_memory_setup	= visws_memory_setup,
+	.arch_intr_init		= NULL,
+	.arch_trap_init		= visws_trap_init,
+	.mach_get_smp_config	= visws_get_smp_config,
+	.mach_find_smp_config	= visws_find_smp_config,
+};
 
 void __init visws_early_detect(void)
 {
@@ -272,16 +280,10 @@ void __init visws_early_detect(void)
 
 	/*
 	 * Install special quirks for timer, interrupt and memory setup:
-	 */
-	arch_time_init_quirk		= visws_time_init_quirk;
-	arch_pre_intr_init_quirk	= visws_pre_intr_init_quirk;
-	arch_memory_setup_quirk		= visws_memory_setup_quirk;
-
-	/*
 	 * Fall back to generic behavior for traps:
+	 * Override generic MP-table parsing:
 	 */
-	arch_intr_init_quirk		= NULL;
-	arch_trap_init_quirk		= visws_trap_init_quirk;
+	x86_quirks = &visws_x86_quirks;
 
 	/*
 	 * Install reboot quirks:
@@ -294,12 +296,6 @@ void __init visws_early_detect(void)
 	 */
 	no_broadcast = 0;
 
-	/*
-	 * Override generic MP-table parsing:
-	 */
-	mach_get_smp_config_quirk	= visws_get_smp_config_quirk;
-	mach_find_smp_config_quirk	= visws_find_smp_config_quirk;
-
 #ifdef CONFIG_X86_IO_APIC
 	/*
 	 * Turn off IO-APIC detection and initialization:
@@ -426,7 +422,7 @@ static __init void cobalt_init(void)
 		co_apic_read(CO_APIC_ID));
 }
 
-int __init visws_trap_init_quirk(void)
+static int __init visws_trap_init(void)
 {
 	lithium_init();
 	cobalt_init();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index b15346092b7..6ca515d6db5 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -37,6 +37,7 @@
 #include <asm/timer.h>
 #include <asm/vmi_time.h>
 #include <asm/kmap_types.h>
+#include <asm/setup.h>
 
 /* Convenient for calling VMI functions indirectly in the ROM */
 typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
@@ -683,7 +684,7 @@ void vmi_bringup(void)
 {
  	/* We must establish the lowmem mapping for MMU ops to work */
 	if (vmi_ops.set_linear_mapping)
-		vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, max_low_pfn, 0);
+		vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0);
 }
 
 /*
@@ -906,7 +907,6 @@ static inline int __init activate_vmi(void)
 #ifdef CONFIG_X86_LOCAL_APIC
 	para_fill(pv_apic_ops.apic_read, APICRead);
 	para_fill(pv_apic_ops.apic_write, APICWrite);
-	para_fill(pv_apic_ops.apic_write_atomic, APICWrite);
 #endif
 
 	/*
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index cdb2363697d..af5bdad8460 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -209,3 +209,11 @@ SECTIONS
 
   DWARF_DEBUG
 }
+
+#ifdef CONFIG_KEXEC
+/* Link time checks */
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+       "kexec control code size is too big")
+#endif
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index 0c029e8959c..7766d36983f 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -61,7 +61,7 @@ static void vsmp_irq_enable(void)
 	native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
 }
 
-static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf,
+static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf,
 				  unsigned long addr, unsigned len)
 {
 	switch (type) {
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8d45fabc5f3..ce3251ce550 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -21,6 +21,7 @@ config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
 	select PREEMPT_NOTIFIERS
+	select MMU_NOTIFIER
 	select ANON_INODES
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index c97d35c218d..d0e940bb6f4 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -2,7 +2,8 @@
 # Makefile for Kernel-based Virtual Machine module
 #
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+                coalesced_mmio.o)
 ifeq ($(CONFIG_KVM_TRACE),y)
 common-objs += $(addprefix ../../../virt/kvm/, kvm_trace.o)
 endif
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 3829aa7b663..c0f7872a912 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -91,7 +91,7 @@ static void pit_set_gate(struct kvm *kvm, int channel, u32 val)
 	c->gate = val;
 }
 
-int pit_get_gate(struct kvm *kvm, int channel)
+static int pit_get_gate(struct kvm *kvm, int channel)
 {
 	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
 
@@ -193,19 +193,16 @@ static void pit_latch_status(struct kvm *kvm, int channel)
 	}
 }
 
-int __pit_timer_fn(struct kvm_kpit_state *ps)
+static int __pit_timer_fn(struct kvm_kpit_state *ps)
 {
 	struct kvm_vcpu *vcpu0 = ps->pit->kvm->vcpus[0];
 	struct kvm_kpit_timer *pt = &ps->pit_timer;
 
-	atomic_inc(&pt->pending);
-	smp_mb__after_atomic_inc();
-	if (vcpu0) {
+	if (!atomic_inc_and_test(&pt->pending))
 		set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
-		if (waitqueue_active(&vcpu0->wq)) {
-			vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-			wake_up_interruptible(&vcpu0->wq);
-		}
+	if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
+		vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+		wake_up_interruptible(&vcpu0->wq);
 	}
 
 	pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
@@ -308,6 +305,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 		create_pit_timer(&ps->pit_timer, val, 0);
 		break;
 	case 2:
+	case 3:
 		create_pit_timer(&ps->pit_timer, val, 1);
 		break;
 	default:
@@ -459,7 +457,8 @@ static void pit_ioport_read(struct kvm_io_device *this,
 	mutex_unlock(&pit_state->lock);
 }
 
-static int pit_in_range(struct kvm_io_device *this, gpa_t addr)
+static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
+			int len, int is_write)
 {
 	return ((addr >= KVM_PIT_BASE_ADDRESS) &&
 		(addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
@@ -500,7 +499,8 @@ static void speaker_ioport_read(struct kvm_io_device *this,
 	mutex_unlock(&pit_state->lock);
 }
 
-static int speaker_in_range(struct kvm_io_device *this, gpa_t addr)
+static int speaker_in_range(struct kvm_io_device *this, gpa_t addr,
+			    int len, int is_write)
 {
 	return (addr == KVM_SPEAKER_BASE_ADDRESS);
 }
@@ -575,7 +575,7 @@ void kvm_free_pit(struct kvm *kvm)
 	}
 }
 
-void __inject_pit_timer_intr(struct kvm *kvm)
+static void __inject_pit_timer_intr(struct kvm *kvm)
 {
 	mutex_lock(&kvm->lock);
 	kvm_ioapic_set_irq(kvm->arch.vioapic, 0, 1);
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index ab29cf2def4..c31164e8aa4 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -130,8 +130,10 @@ void kvm_pic_set_irq(void *opaque, int irq, int level)
 {
 	struct kvm_pic *s = opaque;
 
-	pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
-	pic_update_irq(s);
+	if (irq >= 0 && irq < PIC_NUM_PINS) {
+		pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
+		pic_update_irq(s);
+	}
 }
 
 /*
@@ -346,7 +348,8 @@ static u32 elcr_ioport_read(void *opaque, u32 addr1)
 	return s->elcr;
 }
 
-static int picdev_in_range(struct kvm_io_device *this, gpa_t addr)
+static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
+			   int len, int is_write)
 {
 	switch (addr) {
 	case 0x20:
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 2a15be2275c..7ca47cbb48b 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -30,6 +30,8 @@
 #include "ioapic.h"
 #include "lapic.h"
 
+#define PIC_NUM_PINS 16
+
 struct kvm;
 struct kvm_vcpu;
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ebc03f5ae16..73f43de69f6 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -356,8 +356,9 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 	case APIC_DM_SMI:
 		printk(KERN_DEBUG "Ignoring guest SMI\n");
 		break;
+
 	case APIC_DM_NMI:
-		printk(KERN_DEBUG "Ignoring guest NMI\n");
+		kvm_inject_nmi(vcpu);
 		break;
 
 	case APIC_DM_INIT:
@@ -572,6 +573,8 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 {
 	u32 val = 0;
 
+	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+
 	if (offset >= LAPIC_MMIO_LENGTH)
 		return 0;
 
@@ -695,6 +698,8 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 	offset &= 0xff0;
 
+	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+
 	switch (offset) {
 	case APIC_ID:		/* Local APIC ID */
 		apic_set_reg(apic, APIC_ID, val);
@@ -780,7 +785,8 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 }
 
-static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr)
+static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
+			   int len, int size)
 {
 	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
 	int ret = 0;
@@ -939,8 +945,8 @@ static int __apic_timer_fn(struct kvm_lapic *apic)
 	int result = 0;
 	wait_queue_head_t *q = &apic->vcpu->wq;
 
-	atomic_inc(&apic->timer.pending);
-	set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
+	if(!atomic_inc_and_test(&apic->timer.pending))
+		set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
 	if (waitqueue_active(q)) {
 		apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 		wake_up_interruptible(q);
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 676c396c9ce..81858881287 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -31,6 +31,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu);
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
 void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
 void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
+u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 7e7c3969f7a..3da2508eb22 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -66,7 +66,8 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg) {}
 #endif
 
 #if defined(MMU_DEBUG) || defined(AUDIT)
-static int dbg = 1;
+static int dbg = 0;
+module_param(dbg, bool, 0644);
 #endif
 
 #ifndef MMU_DEBUG
@@ -652,6 +653,88 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn)
 	account_shadowed(kvm, gfn);
 }
 
+static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
+{
+	u64 *spte;
+	int need_tlb_flush = 0;
+
+	while ((spte = rmap_next(kvm, rmapp, NULL))) {
+		BUG_ON(!(*spte & PT_PRESENT_MASK));
+		rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte);
+		rmap_remove(kvm, spte);
+		set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+		need_tlb_flush = 1;
+	}
+	return need_tlb_flush;
+}
+
+static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
+			  int (*handler)(struct kvm *kvm, unsigned long *rmapp))
+{
+	int i;
+	int retval = 0;
+
+	/*
+	 * If mmap_sem isn't taken, we can look the memslots with only
+	 * the mmu_lock by skipping over the slots with userspace_addr == 0.
+	 */
+	for (i = 0; i < kvm->nmemslots; i++) {
+		struct kvm_memory_slot *memslot = &kvm->memslots[i];
+		unsigned long start = memslot->userspace_addr;
+		unsigned long end;
+
+		/* mmu_lock protects userspace_addr */
+		if (!start)
+			continue;
+
+		end = start + (memslot->npages << PAGE_SHIFT);
+		if (hva >= start && hva < end) {
+			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
+			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
+			retval |= handler(kvm,
+					  &memslot->lpage_info[
+						  gfn_offset /
+						  KVM_PAGES_PER_HPAGE].rmap_pde);
+		}
+	}
+
+	return retval;
+}
+
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
+{
+	return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp);
+}
+
+static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
+{
+	u64 *spte;
+	int young = 0;
+
+	/* always return old for EPT */
+	if (!shadow_accessed_mask)
+		return 0;
+
+	spte = rmap_next(kvm, rmapp, NULL);
+	while (spte) {
+		int _young;
+		u64 _spte = *spte;
+		BUG_ON(!(_spte & PT_PRESENT_MASK));
+		_young = _spte & PT_ACCESSED_MASK;
+		if (_young) {
+			young = 1;
+			clear_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte);
+		}
+		spte = rmap_next(kvm, rmapp, spte);
+	}
+	return young;
+}
+
+int kvm_age_hva(struct kvm *kvm, unsigned long hva)
+{
+	return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
+}
+
 #ifdef MMU_DEBUG
 static int is_empty_shadow_page(u64 *spt)
 {
@@ -776,6 +859,15 @@ static void mmu_page_remove_parent_pte(struct kvm_mmu_page *sp,
 	BUG();
 }
 
+static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
+				    struct kvm_mmu_page *sp)
+{
+	int i;
+
+	for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
+		sp->spt[i] = shadow_trap_nonpresent_pte;
+}
+
 static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 {
 	unsigned index;
@@ -841,7 +933,10 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	hlist_add_head(&sp->hash_link, bucket);
 	if (!metaphysical)
 		rmap_write_protect(vcpu->kvm, gfn);
-	vcpu->arch.mmu.prefetch_page(vcpu, sp);
+	if (shadow_trap_nonpresent_pte != shadow_notrap_nonpresent_pte)
+		vcpu->arch.mmu.prefetch_page(vcpu, sp);
+	else
+		nonpaging_prefetch_page(vcpu, sp);
 	return sp;
 }
 
@@ -917,14 +1012,17 @@ static void kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 	}
 	kvm_mmu_page_unlink_children(kvm, sp);
 	if (!sp->root_count) {
-		if (!sp->role.metaphysical)
+		if (!sp->role.metaphysical && !sp->role.invalid)
 			unaccount_shadowed(kvm, sp->gfn);
 		hlist_del(&sp->hash_link);
 		kvm_mmu_free_page(kvm, sp);
 	} else {
+		int invalid = sp->role.invalid;
 		list_move(&sp->link, &kvm->arch.active_mmu_pages);
 		sp->role.invalid = 1;
 		kvm_reload_remote_mmus(kvm);
+		if (!sp->role.metaphysical && !invalid)
+			unaccount_shadowed(kvm, sp->gfn);
 	}
 	kvm_mmu_reset_last_pte_updated(kvm);
 }
@@ -1103,7 +1201,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		mark_page_dirty(vcpu->kvm, gfn);
 
 	pgprintk("%s: setting spte %llx\n", __func__, spte);
-	pgprintk("instantiating %s PTE (%s) at %d (%llx) addr %llx\n",
+	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
 		 (spte&PT_PAGE_SIZE_MASK)? "2MB" : "4kB",
 		 (spte&PT_WRITABLE_MASK)?"RW":"R", gfn, spte, shadow_pte);
 	set_shadow_pte(shadow_pte, spte);
@@ -1122,8 +1220,10 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		else
 			kvm_release_pfn_clean(pfn);
 	}
-	if (!ptwrite || !*ptwrite)
+	if (speculative) {
 		vcpu->arch.last_pte_updated = shadow_pte;
+		vcpu->arch.last_pte_gfn = gfn;
+	}
 }
 
 static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
@@ -1171,9 +1271,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 				return -ENOMEM;
 			}
 
-			table[index] = __pa(new_table->spt)
-				| PT_PRESENT_MASK | PT_WRITABLE_MASK
-				| shadow_user_mask | shadow_x_mask;
+			set_shadow_pte(&table[index],
+				       __pa(new_table->spt)
+				       | PT_PRESENT_MASK | PT_WRITABLE_MASK
+				       | shadow_user_mask | shadow_x_mask);
 		}
 		table_addr = table[index] & PT64_BASE_ADDR_MASK;
 	}
@@ -1184,6 +1285,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	int r;
 	int largepage = 0;
 	pfn_t pfn;
+	unsigned long mmu_seq;
 
 	down_read(&current->mm->mmap_sem);
 	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
@@ -1191,6 +1293,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 		largepage = 1;
 	}
 
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -1201,6 +1305,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	}
 
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, v, write, largepage, gfn, pfn,
 			 PT32E_ROOT_LEVEL);
@@ -1208,18 +1314,14 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 
 
 	return r;
-}
-
 
-static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
-				    struct kvm_mmu_page *sp)
-{
-	int i;
-
-	for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
-		sp->spt[i] = shadow_trap_nonpresent_pte;
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
+
 static void mmu_free_roots(struct kvm_vcpu *vcpu)
 {
 	int i;
@@ -1335,6 +1437,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	int r;
 	int largepage = 0;
 	gfn_t gfn = gpa >> PAGE_SHIFT;
+	unsigned long mmu_seq;
 
 	ASSERT(vcpu);
 	ASSERT(VALID_PAGE(vcpu->arch.mmu.root_hpa));
@@ -1348,6 +1451,8 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		largepage = 1;
 	}
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 	if (is_error_pfn(pfn)) {
@@ -1355,12 +1460,19 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		return 1;
 	}
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
 			 largepage, gfn, pfn, kvm_x86_ops->get_tdp_level());
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return r;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 static void nonpaging_free(struct kvm_vcpu *vcpu)
@@ -1660,6 +1772,8 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
+	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -1671,6 +1785,18 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	vcpu->arch.update_pte.pfn = pfn;
 }
 
+static void kvm_mmu_access_page(struct kvm_vcpu *vcpu, gfn_t gfn)
+{
+	u64 *spte = vcpu->arch.last_pte_updated;
+
+	if (spte
+	    && vcpu->arch.last_pte_gfn == gfn
+	    && shadow_accessed_mask
+	    && !(*spte & shadow_accessed_mask)
+	    && is_shadow_present_pte(*spte))
+		set_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte);
+}
+
 void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		       const u8 *new, int bytes)
 {
@@ -1694,6 +1820,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
 	mmu_guess_page_from_pte_write(vcpu, gpa, new, bytes);
 	spin_lock(&vcpu->kvm->mmu_lock);
+	kvm_mmu_access_page(vcpu, gfn);
 	kvm_mmu_free_some_pages(vcpu);
 	++vcpu->kvm->stat.mmu_pte_write;
 	kvm_mmu_audit(vcpu, "pre pte write");
@@ -1791,6 +1918,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	return r;
 }
+EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
@@ -1847,6 +1975,12 @@ void kvm_enable_tdp(void)
 }
 EXPORT_SYMBOL_GPL(kvm_enable_tdp);
 
+void kvm_disable_tdp(void)
+{
+	tdp_enabled = false;
+}
+EXPORT_SYMBOL_GPL(kvm_disable_tdp);
+
 static void free_mmu_pages(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu_page *sp;
@@ -1948,7 +2082,7 @@ void kvm_mmu_zap_all(struct kvm *kvm)
 	kvm_flush_remote_tlbs(kvm);
 }
 
-void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
+static void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
 {
 	struct kvm_mmu_page *page;
 
@@ -1968,6 +2102,8 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 	list_for_each_entry(kvm, &vm_list, vm_list) {
 		int npages;
 
+		if (!down_read_trylock(&kvm->slots_lock))
+			continue;
 		spin_lock(&kvm->mmu_lock);
 		npages = kvm->arch.n_alloc_mmu_pages -
 			 kvm->arch.n_free_mmu_pages;
@@ -1980,6 +2116,7 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 		nr_to_scan--;
 
 		spin_unlock(&kvm->mmu_lock);
+		up_read(&kvm->slots_lock);
 	}
 	if (kvm_freed)
 		list_move_tail(&kvm_freed->vm_list, &vm_list);
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 1730757bbc7..258e5d56298 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -15,7 +15,8 @@
 #define PT_USER_MASK (1ULL << 2)
 #define PT_PWT_MASK (1ULL << 3)
 #define PT_PCD_MASK (1ULL << 4)
-#define PT_ACCESSED_MASK (1ULL << 5)
+#define PT_ACCESSED_SHIFT 5
+#define PT_ACCESSED_MASK (1ULL << PT_ACCESSED_SHIFT)
 #define PT_DIRTY_MASK (1ULL << 6)
 #define PT_PAGE_SIZE_MASK (1ULL << 7)
 #define PT_PAT_MASK (1ULL << 7)
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 934c7b61939..4a814bff21f 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -263,6 +263,8 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pfn = vcpu->arch.update_pte.pfn;
 	if (is_error_pfn(pfn))
 		return;
+	if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq))
+		return;
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
 		     gpte & PT_DIRTY_MASK, NULL, largepage, gpte_to_gfn(gpte),
@@ -343,7 +345,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		shadow_addr = __pa(shadow_page->spt);
 		shadow_pte = shadow_addr | PT_PRESENT_MASK | PT_ACCESSED_MASK
 			| PT_WRITABLE_MASK | PT_USER_MASK;
-		*shadow_ent = shadow_pte;
+		set_shadow_pte(shadow_ent, shadow_pte);
 	}
 
 	mmu_set_spte(vcpu, shadow_ent, access, walker->pte_access & access,
@@ -380,6 +382,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	int r;
 	pfn_t pfn;
 	int largepage = 0;
+	unsigned long mmu_seq;
 
 	pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
 	kvm_mmu_audit(vcpu, "pre page fault");
@@ -413,6 +416,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 			largepage = 1;
 		}
 	}
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -424,6 +429,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	}
 
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
 				  largepage, &write_pt, pfn);
@@ -439,6 +446,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return write_pt;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
@@ -460,8 +472,9 @@ static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
 static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 				 struct kvm_mmu_page *sp)
 {
-	int i, offset = 0, r = 0;
-	pt_element_t pt;
+	int i, j, offset, r;
+	pt_element_t pt[256 / sizeof(pt_element_t)];
+	gpa_t pte_gpa;
 
 	if (sp->role.metaphysical
 	    || (PTTYPE == 32 && sp->role.level > PT_PAGE_TABLE_LEVEL)) {
@@ -469,19 +482,20 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 		return;
 	}
 
-	if (PTTYPE == 32)
+	pte_gpa = gfn_to_gpa(sp->gfn);
+	if (PTTYPE == 32) {
 		offset = sp->role.quadrant << PT64_LEVEL_BITS;
+		pte_gpa += offset * sizeof(pt_element_t);
+	}
 
-	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
-		gpa_t pte_gpa = gfn_to_gpa(sp->gfn);
-		pte_gpa += (i+offset) * sizeof(pt_element_t);
-
-		r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &pt,
-					  sizeof(pt_element_t));
-		if (r || is_present_pte(pt))
-			sp->spt[i] = shadow_trap_nonpresent_pte;
-		else
-			sp->spt[i] = shadow_notrap_nonpresent_pte;
+	for (i = 0; i < PT64_ENT_PER_PAGE; i += ARRAY_SIZE(pt)) {
+		r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, pt, sizeof pt);
+		pte_gpa += ARRAY_SIZE(pt) * sizeof(pt_element_t);
+		for (j = 0; j < ARRAY_SIZE(pt); ++j)
+			if (r || is_present_pte(pt[j]))
+				sp->spt[i+j] = shadow_trap_nonpresent_pte;
+			else
+				sp->spt[i+j] = shadow_notrap_nonpresent_pte;
 	}
 }
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 6b0d5fa5bab..8233b86c778 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -27,6 +27,8 @@
 
 #include <asm/desc.h>
 
+#define __ex(x) __kvm_handle_fault_on_reboot(x)
+
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -60,6 +62,7 @@ static int npt = 1;
 module_param(npt, int, S_IRUGO);
 
 static void kvm_reput_irq(struct vcpu_svm *svm);
+static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 
 static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
 {
@@ -129,17 +132,17 @@ static inline void push_irq(struct kvm_vcpu *vcpu, u8 irq)
 
 static inline void clgi(void)
 {
-	asm volatile (SVM_CLGI);
+	asm volatile (__ex(SVM_CLGI));
 }
 
 static inline void stgi(void)
 {
-	asm volatile (SVM_STGI);
+	asm volatile (__ex(SVM_STGI));
 }
 
 static inline void invlpga(unsigned long addr, u32 asid)
 {
-	asm volatile (SVM_INVLPGA :: "a"(addr), "c"(asid));
+	asm volatile (__ex(SVM_INVLPGA) :: "a"(addr), "c"(asid));
 }
 
 static inline unsigned long kvm_read_cr2(void)
@@ -270,19 +273,11 @@ static int has_svm(void)
 
 static void svm_hardware_disable(void *garbage)
 {
-	struct svm_cpu_data *svm_data
-		= per_cpu(svm_data, raw_smp_processor_id());
-
-	if (svm_data) {
-		uint64_t efer;
+	uint64_t efer;
 
-		wrmsrl(MSR_VM_HSAVE_PA, 0);
-		rdmsrl(MSR_EFER, efer);
-		wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
-		per_cpu(svm_data, raw_smp_processor_id()) = NULL;
-		__free_page(svm_data->save_area);
-		kfree(svm_data);
-	}
+	wrmsrl(MSR_VM_HSAVE_PA, 0);
+	rdmsrl(MSR_EFER, efer);
+	wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
 }
 
 static void svm_hardware_enable(void *garbage)
@@ -321,6 +316,19 @@ static void svm_hardware_enable(void *garbage)
 	       page_to_pfn(svm_data->save_area) << PAGE_SHIFT);
 }
 
+static void svm_cpu_uninit(int cpu)
+{
+	struct svm_cpu_data *svm_data
+		= per_cpu(svm_data, raw_smp_processor_id());
+
+	if (!svm_data)
+		return;
+
+	per_cpu(svm_data, raw_smp_processor_id()) = NULL;
+	__free_page(svm_data->save_area);
+	kfree(svm_data);
+}
+
 static int svm_cpu_init(int cpu)
 {
 	struct svm_cpu_data *svm_data;
@@ -446,7 +454,8 @@ static __init int svm_hardware_setup(void)
 	if (npt_enabled) {
 		printk(KERN_INFO "kvm: Nested Paging enabled\n");
 		kvm_enable_tdp();
-	}
+	} else
+		kvm_disable_tdp();
 
 	return 0;
 
@@ -458,6 +467,11 @@ err:
 
 static __exit void svm_hardware_unsetup(void)
 {
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		svm_cpu_uninit(cpu);
+
 	__free_pages(pfn_to_page(iopm_base >> PAGE_SHIFT), IOPM_ALLOC_ORDER);
 	iopm_base = 0;
 }
@@ -707,10 +721,6 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu)
 	rdtscll(vcpu->arch.host_tsc);
 }
 
-static void svm_vcpu_decache(struct kvm_vcpu *vcpu)
-{
-}
-
 static void svm_cache_regs(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -869,6 +879,10 @@ set:
 static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
+	unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
+
+	if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
+		force_new_asid(vcpu);
 
 	vcpu->arch.cr4 = cr4;
 	if (!npt_enabled)
@@ -949,7 +963,9 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data)
 
 static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
 {
-	return to_svm(vcpu)->db_regs[dr];
+	unsigned long val = to_svm(vcpu)->db_regs[dr];
+	KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
+	return val;
 }
 
 static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
@@ -997,13 +1013,35 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	struct kvm *kvm = svm->vcpu.kvm;
 	u64 fault_address;
 	u32 error_code;
+	bool event_injection = false;
 
 	if (!irqchip_in_kernel(kvm) &&
-		is_external_interrupt(exit_int_info))
+	    is_external_interrupt(exit_int_info)) {
+		event_injection = true;
 		push_irq(&svm->vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK);
+	}
 
 	fault_address  = svm->vmcb->control.exit_info_2;
 	error_code = svm->vmcb->control.exit_info_1;
+
+	if (!npt_enabled)
+		KVMTRACE_3D(PAGE_FAULT, &svm->vcpu, error_code,
+			    (u32)fault_address, (u32)(fault_address >> 32),
+			    handler);
+	else
+		KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
+			    (u32)fault_address, (u32)(fault_address >> 32),
+			    handler);
+	/*
+	 * FIXME: Tis shouldn't be necessary here, but there is a flush
+	 * missing in the MMU code. Until we find this bug, flush the
+	 * complete TLB here on an NPF
+	 */
+	if (npt_enabled)
+		svm_flush_tlb(&svm->vcpu);
+
+	if (event_injection)
+		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
@@ -1081,6 +1119,19 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return kvm_emulate_pio(&svm->vcpu, kvm_run, in, size, port);
 }
 
+static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	KVMTRACE_0D(NMI, &svm->vcpu, handler);
+	return 1;
+}
+
+static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	++svm->vcpu.stat.irq_exits;
+	KVMTRACE_0D(INTR, &svm->vcpu, handler);
+	return 1;
+}
+
 static int nop_on_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	return 1;
@@ -1219,6 +1270,9 @@ static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	if (svm_get_msr(&svm->vcpu, ecx, &data))
 		kvm_inject_gp(&svm->vcpu, 0);
 	else {
+		KVMTRACE_3D(MSR_READ, &svm->vcpu, ecx, (u32)data,
+			    (u32)(data >> 32), handler);
+
 		svm->vmcb->save.rax = data & 0xffffffff;
 		svm->vcpu.arch.regs[VCPU_REGS_RDX] = data >> 32;
 		svm->next_rip = svm->vmcb->save.rip + 2;
@@ -1284,16 +1338,19 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	case MSR_K7_EVNTSEL1:
 	case MSR_K7_EVNTSEL2:
 	case MSR_K7_EVNTSEL3:
+	case MSR_K7_PERFCTR0:
+	case MSR_K7_PERFCTR1:
+	case MSR_K7_PERFCTR2:
+	case MSR_K7_PERFCTR3:
 		/*
-		 * only support writing 0 to the performance counters for now
-		 * to make Windows happy. Should be replaced by a real
-		 * performance counter emulation later.
+		 * Just discard all writes to the performance counters; this
+		 * should keep both older linux and windows 64-bit guests
+		 * happy
 		 */
-		if (data != 0)
-			goto unhandled;
+		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", ecx, data);
+
 		break;
 	default:
-	unhandled:
 		return kvm_set_msr_common(vcpu, ecx, data);
 	}
 	return 0;
@@ -1304,6 +1361,10 @@ static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u64 data = (svm->vmcb->save.rax & -1u)
 		| ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
+
+	KVMTRACE_3D(MSR_WRITE, &svm->vcpu, ecx, (u32)data, (u32)(data >> 32),
+		    handler);
+
 	svm->next_rip = svm->vmcb->save.rip + 2;
 	if (svm_set_msr(&svm->vcpu, ecx, data))
 		kvm_inject_gp(&svm->vcpu, 0);
@@ -1323,6 +1384,8 @@ static int msr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int interrupt_window_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
+	KVMTRACE_0D(PEND_INTR, &svm->vcpu, handler);
+
 	svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_VINTR);
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	/*
@@ -1364,8 +1427,8 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_EXCP_BASE + PF_VECTOR] 	= pf_interception,
 	[SVM_EXIT_EXCP_BASE + NM_VECTOR] 	= nm_interception,
 	[SVM_EXIT_EXCP_BASE + MC_VECTOR] 	= mc_interception,
-	[SVM_EXIT_INTR] 			= nop_on_interception,
-	[SVM_EXIT_NMI]				= nop_on_interception,
+	[SVM_EXIT_INTR] 			= intr_interception,
+	[SVM_EXIT_NMI]				= nmi_interception,
 	[SVM_EXIT_SMI]				= nop_on_interception,
 	[SVM_EXIT_INIT]				= nop_on_interception,
 	[SVM_EXIT_VINTR]			= interrupt_window_interception,
@@ -1397,6 +1460,9 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u32 exit_code = svm->vmcb->control.exit_code;
 
+	KVMTRACE_3D(VMEXIT, vcpu, exit_code, (u32)svm->vmcb->save.rip,
+		    (u32)((u64)svm->vmcb->save.rip >> 32), entryexit);
+
 	if (npt_enabled) {
 		int mmu_reload = 0;
 		if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
@@ -1470,6 +1536,8 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 {
 	struct vmcb_control_area *control;
 
+	KVMTRACE_1D(INJ_VIRQ, &svm->vcpu, (u32)irq, handler);
+
 	control = &svm->vmcb->control;
 	control->int_vector = irq;
 	control->int_ctl &= ~V_INTR_PRIO_MASK;
@@ -1660,9 +1728,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	sync_lapic_to_cr8(vcpu);
 
 	save_host_msrs(vcpu);
-	fs_selector = read_fs();
-	gs_selector = read_gs();
-	ldt_selector = read_ldt();
+	fs_selector = kvm_read_fs();
+	gs_selector = kvm_read_gs();
+	ldt_selector = kvm_read_ldt();
 	svm->host_cr2 = kvm_read_cr2();
 	svm->host_dr6 = read_dr6();
 	svm->host_dr7 = read_dr7();
@@ -1716,17 +1784,17 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		/* Enter guest mode */
 		"push %%rax \n\t"
 		"mov %c[vmcb](%[svm]), %%rax \n\t"
-		SVM_VMLOAD "\n\t"
-		SVM_VMRUN "\n\t"
-		SVM_VMSAVE "\n\t"
+		__ex(SVM_VMLOAD) "\n\t"
+		__ex(SVM_VMRUN) "\n\t"
+		__ex(SVM_VMSAVE) "\n\t"
 		"pop %%rax \n\t"
 #else
 		/* Enter guest mode */
 		"push %%eax \n\t"
 		"mov %c[vmcb](%[svm]), %%eax \n\t"
-		SVM_VMLOAD "\n\t"
-		SVM_VMRUN "\n\t"
-		SVM_VMSAVE "\n\t"
+		__ex(SVM_VMLOAD) "\n\t"
+		__ex(SVM_VMRUN) "\n\t"
+		__ex(SVM_VMSAVE) "\n\t"
 		"pop %%eax \n\t"
 #endif
 
@@ -1795,9 +1863,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	write_dr7(svm->host_dr7);
 	kvm_write_cr2(svm->host_cr2);
 
-	load_fs(fs_selector);
-	load_gs(gs_selector);
-	load_ldt(ldt_selector);
+	kvm_load_fs(fs_selector);
+	kvm_load_gs(gs_selector);
+	kvm_load_ldt(ldt_selector);
 	load_host_msrs(vcpu);
 
 	reload_tss(vcpu);
@@ -1889,7 +1957,6 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.prepare_guest_switch = svm_prepare_guest_switch,
 	.vcpu_load = svm_vcpu_load,
 	.vcpu_put = svm_vcpu_put,
-	.vcpu_decache = svm_vcpu_decache,
 
 	.set_guest_debug = svm_guest_debug,
 	.get_msr = svm_get_msr,
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 10ce6ee4c49..7041cc52b56 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include <asm/desc.h>
 
+#define __ex(x) __kvm_handle_fault_on_reboot(x)
+
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -53,6 +55,7 @@ struct vmcs {
 
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
+	struct list_head      local_vcpus_link;
 	int                   launched;
 	u8                    fail;
 	u32                   idt_vectoring_info;
@@ -88,9 +91,11 @@ static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
 }
 
 static int init_rmode(struct kvm *kvm);
+static u64 construct_eptp(unsigned long root_hpa);
 
 static DEFINE_PER_CPU(struct vmcs *, vmxarea);
 static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
+static DEFINE_PER_CPU(struct list_head, vcpus_on_cpu);
 
 static struct page *vmx_io_bitmap_a;
 static struct page *vmx_io_bitmap_b;
@@ -260,6 +265,11 @@ static inline int cpu_has_vmx_vpid(void)
 		SECONDARY_EXEC_ENABLE_VPID);
 }
 
+static inline int cpu_has_virtual_nmis(void)
+{
+	return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS;
+}
+
 static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 {
 	int i;
@@ -278,7 +288,7 @@ static inline void __invvpid(int ext, u16 vpid, gva_t gva)
 	u64 gva;
     } operand = { vpid, 0, gva };
 
-    asm volatile (ASM_VMX_INVVPID
+    asm volatile (__ex(ASM_VMX_INVVPID)
 		  /* CF==1 or ZF==1 --> rc = -1 */
 		  "; ja 1f ; ud2 ; 1:"
 		  : : "a"(&operand), "c"(ext) : "cc", "memory");
@@ -290,7 +300,7 @@ static inline void __invept(int ext, u64 eptp, gpa_t gpa)
 		u64 eptp, gpa;
 	} operand = {eptp, gpa};
 
-	asm volatile (ASM_VMX_INVEPT
+	asm volatile (__ex(ASM_VMX_INVEPT)
 			/* CF==1 or ZF==1 --> rc = -1 */
 			"; ja 1f ; ud2 ; 1:\n"
 			: : "a" (&operand), "c" (ext) : "cc", "memory");
@@ -311,7 +321,7 @@ static void vmcs_clear(struct vmcs *vmcs)
 	u64 phys_addr = __pa(vmcs);
 	u8 error;
 
-	asm volatile (ASM_VMX_VMCLEAR_RAX "; setna %0"
+	asm volatile (__ex(ASM_VMX_VMCLEAR_RAX) "; setna %0"
 		      : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
 		      : "cc", "memory");
 	if (error)
@@ -329,6 +339,9 @@ static void __vcpu_clear(void *arg)
 	if (per_cpu(current_vmcs, cpu) == vmx->vmcs)
 		per_cpu(current_vmcs, cpu) = NULL;
 	rdtscll(vmx->vcpu.arch.host_tsc);
+	list_del(&vmx->local_vcpus_link);
+	vmx->vcpu.cpu = -1;
+	vmx->launched = 0;
 }
 
 static void vcpu_clear(struct vcpu_vmx *vmx)
@@ -336,7 +349,6 @@ static void vcpu_clear(struct vcpu_vmx *vmx)
 	if (vmx->vcpu.cpu == -1)
 		return;
 	smp_call_function_single(vmx->vcpu.cpu, __vcpu_clear, vmx, 1);
-	vmx->launched = 0;
 }
 
 static inline void vpid_sync_vcpu_all(struct vcpu_vmx *vmx)
@@ -378,7 +390,7 @@ static unsigned long vmcs_readl(unsigned long field)
 {
 	unsigned long value;
 
-	asm volatile (ASM_VMX_VMREAD_RDX_RAX
+	asm volatile (__ex(ASM_VMX_VMREAD_RDX_RAX)
 		      : "=a"(value) : "d"(field) : "cc");
 	return value;
 }
@@ -413,7 +425,7 @@ static void vmcs_writel(unsigned long field, unsigned long value)
 {
 	u8 error;
 
-	asm volatile (ASM_VMX_VMWRITE_RAX_RDX "; setna %0"
+	asm volatile (__ex(ASM_VMX_VMWRITE_RAX_RDX) "; setna %0"
 		       : "=q"(error) : "a"(value), "d"(field) : "cc");
 	if (unlikely(error))
 		vmwrite_error(field, value);
@@ -431,10 +443,8 @@ static void vmcs_write32(unsigned long field, u32 value)
 
 static void vmcs_write64(unsigned long field, u64 value)
 {
-#ifdef CONFIG_X86_64
-	vmcs_writel(field, value);
-#else
 	vmcs_writel(field, value);
+#ifndef CONFIG_X86_64
 	asm volatile ("");
 	vmcs_writel(field+1, value >> 32);
 #endif
@@ -474,7 +484,7 @@ static void reload_tss(void)
 	struct descriptor_table gdt;
 	struct desc_struct *descs;
 
-	get_gdt(&gdt);
+	kvm_get_gdt(&gdt);
 	descs = (void *)gdt.base;
 	descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
 	load_TR_desc();
@@ -530,9 +540,9 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 	 * Set host fs and gs selectors.  Unfortunately, 22.2.3 does not
 	 * allow segment selectors with cpl > 0 or ti == 1.
 	 */
-	vmx->host_state.ldt_sel = read_ldt();
+	vmx->host_state.ldt_sel = kvm_read_ldt();
 	vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel;
-	vmx->host_state.fs_sel = read_fs();
+	vmx->host_state.fs_sel = kvm_read_fs();
 	if (!(vmx->host_state.fs_sel & 7)) {
 		vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel);
 		vmx->host_state.fs_reload_needed = 0;
@@ -540,7 +550,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 		vmcs_write16(HOST_FS_SELECTOR, 0);
 		vmx->host_state.fs_reload_needed = 1;
 	}
-	vmx->host_state.gs_sel = read_gs();
+	vmx->host_state.gs_sel = kvm_read_gs();
 	if (!(vmx->host_state.gs_sel & 7))
 		vmcs_write16(HOST_GS_SELECTOR, vmx->host_state.gs_sel);
 	else {
@@ -576,15 +586,15 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 	++vmx->vcpu.stat.host_state_reload;
 	vmx->host_state.loaded = 0;
 	if (vmx->host_state.fs_reload_needed)
-		load_fs(vmx->host_state.fs_sel);
+		kvm_load_fs(vmx->host_state.fs_sel);
 	if (vmx->host_state.gs_ldt_reload_needed) {
-		load_ldt(vmx->host_state.ldt_sel);
+		kvm_load_ldt(vmx->host_state.ldt_sel);
 		/*
 		 * If we have to reload gs, we must take care to
 		 * preserve our gs base.
 		 */
 		local_irq_save(flags);
-		load_gs(vmx->host_state.gs_sel);
+		kvm_load_gs(vmx->host_state.gs_sel);
 #ifdef CONFIG_X86_64
 		wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE));
 #endif
@@ -617,13 +627,17 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		vcpu_clear(vmx);
 		kvm_migrate_timers(vcpu);
 		vpid_sync_vcpu_all(vmx);
+		local_irq_disable();
+		list_add(&vmx->local_vcpus_link,
+			 &per_cpu(vcpus_on_cpu, cpu));
+		local_irq_enable();
 	}
 
 	if (per_cpu(current_vmcs, cpu) != vmx->vmcs) {
 		u8 error;
 
 		per_cpu(current_vmcs, cpu) = vmx->vmcs;
-		asm volatile (ASM_VMX_VMPTRLD_RAX "; setna %0"
+		asm volatile (__ex(ASM_VMX_VMPTRLD_RAX) "; setna %0"
 			      : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
 			      : "cc");
 		if (error)
@@ -640,8 +654,8 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		 * Linux uses per-cpu TSS and GDT, so set these when switching
 		 * processors.
 		 */
-		vmcs_writel(HOST_TR_BASE, read_tr_base()); /* 22.2.4 */
-		get_gdt(&dt);
+		vmcs_writel(HOST_TR_BASE, kvm_read_tr_base()); /* 22.2.4 */
+		kvm_get_gdt(&dt);
 		vmcs_writel(HOST_GDTR_BASE, dt.base);   /* 22.2.4 */
 
 		rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
@@ -684,11 +698,6 @@ static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
 	update_exception_bitmap(vcpu);
 }
 
-static void vmx_vcpu_decache(struct kvm_vcpu *vcpu)
-{
-	vcpu_clear(to_vmx(vcpu));
-}
-
 static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 {
 	return vmcs_readl(GUEST_RFLAGS);
@@ -913,6 +922,18 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_IA32_TIME_STAMP_COUNTER:
 		guest_write_tsc(data);
 		break;
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
+	case MSR_P6_EVNTSEL0:
+	case MSR_P6_EVNTSEL1:
+		/*
+		 * Just discard all writes to the performance counters; this
+		 * should keep both older linux and windows 64-bit guests
+		 * happy
+		 */
+		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", msr_index, data);
+
+		break;
 	default:
 		vmx_load_host_state(vmx);
 		msr = find_msr_entry(vmx, msr_index);
@@ -1022,6 +1043,7 @@ static void hardware_enable(void *garbage)
 	u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
 	u64 old;
 
+	INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
 	if ((old & (MSR_IA32_FEATURE_CONTROL_LOCKED |
 		    MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED))
@@ -1032,13 +1054,25 @@ static void hardware_enable(void *garbage)
 		       MSR_IA32_FEATURE_CONTROL_LOCKED |
 		       MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED);
 	write_cr4(read_cr4() | X86_CR4_VMXE); /* FIXME: not cpu hotplug safe */
-	asm volatile (ASM_VMX_VMXON_RAX : : "a"(&phys_addr), "m"(phys_addr)
+	asm volatile (ASM_VMX_VMXON_RAX
+		      : : "a"(&phys_addr), "m"(phys_addr)
 		      : "memory", "cc");
 }
 
+static void vmclear_local_vcpus(void)
+{
+	int cpu = raw_smp_processor_id();
+	struct vcpu_vmx *vmx, *n;
+
+	list_for_each_entry_safe(vmx, n, &per_cpu(vcpus_on_cpu, cpu),
+				 local_vcpus_link)
+		__vcpu_clear(vmx);
+}
+
 static void hardware_disable(void *garbage)
 {
-	asm volatile (ASM_VMX_VMXOFF : : : "cc");
+	vmclear_local_vcpus();
+	asm volatile (__ex(ASM_VMX_VMXOFF) : : : "cc");
 	write_cr4(read_cr4() & ~X86_CR4_VMXE);
 }
 
@@ -1072,7 +1106,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 	u32 _vmentry_control = 0;
 
 	min = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING;
-	opt = 0;
+	opt = PIN_BASED_VIRTUAL_NMIS;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PINBASED_CTLS,
 				&_pin_based_exec_control) < 0)
 		return -EIO;
@@ -1389,6 +1423,8 @@ static void exit_lmode(struct kvm_vcpu *vcpu)
 static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 {
 	vpid_sync_vcpu_all(to_vmx(vcpu));
+	if (vm_need_ept())
+		ept_sync_context(construct_eptp(vcpu->arch.mmu.root_hpa));
 }
 
 static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
@@ -1420,7 +1456,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 	if (!(cr0 & X86_CR0_PG)) {
 		/* From paging/starting to nonpaging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
-			     vmcs_config.cpu_based_exec_ctrl |
+			     vmcs_read32(CPU_BASED_VM_EXEC_CONTROL) |
 			     (CPU_BASED_CR3_LOAD_EXITING |
 			      CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
@@ -1430,7 +1466,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 	} else if (!is_paging(vcpu)) {
 		/* From nonpaging to paging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
-			     vmcs_config.cpu_based_exec_ctrl &
+			     vmcs_read32(CPU_BASED_VM_EXEC_CONTROL) &
 			     ~(CPU_BASED_CR3_LOAD_EXITING |
 			       CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
@@ -1821,7 +1857,7 @@ static void allocate_vpid(struct vcpu_vmx *vmx)
 	spin_unlock(&vmx_vpid_lock);
 }
 
-void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
+static void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
 {
 	void *va;
 
@@ -1907,8 +1943,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS);  /* 22.2.4 */
 	vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
 	vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
-	vmcs_write16(HOST_FS_SELECTOR, read_fs());    /* 22.2.4 */
-	vmcs_write16(HOST_GS_SELECTOR, read_gs());    /* 22.2.4 */
+	vmcs_write16(HOST_FS_SELECTOR, kvm_read_fs());    /* 22.2.4 */
+	vmcs_write16(HOST_GS_SELECTOR, kvm_read_gs());    /* 22.2.4 */
 	vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
 #ifdef CONFIG_X86_64
 	rdmsrl(MSR_FS_BASE, a);
@@ -1922,7 +1958,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 
 	vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8);  /* 22.2.4 */
 
-	get_idt(&dt);
+	kvm_get_idt(&dt);
 	vmcs_writel(HOST_IDTR_BASE, dt.base);   /* 22.2.4 */
 
 	asm("mov $.Lkvm_vmx_return, %0" : "=r"(kvm_vmx_return));
@@ -2114,6 +2150,13 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu, int irq)
 			irq | INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
 }
 
+static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
+{
+	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+			INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR);
+	vcpu->arch.nmi_pending = 0;
+}
+
 static void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
 {
 	int word_index = __ffs(vcpu->arch.irq_summary);
@@ -2255,6 +2298,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		cr2 = vmcs_readl(EXIT_QUALIFICATION);
 		KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
 			    (u32)((u64)cr2 >> 32), handler);
+		if (vect_info & VECTORING_INFO_VALID_MASK)
+			kvm_mmu_unprotect_page_virt(vcpu, cr2);
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
 	}
 
@@ -2554,8 +2599,6 @@ static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
 	offset = exit_qualification & 0xffful;
 
-	KVMTRACE_1D(APIC_ACCESS, vcpu, (u32)offset, handler);
-
 	er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
 
 	if (er !=  EMULATE_DONE) {
@@ -2639,6 +2682,19 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	u32 cpu_based_vm_exec_control;
+
+	/* clear pending NMI */
+	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+	cpu_based_vm_exec_control &= ~CPU_BASED_VIRTUAL_NMI_PENDING;
+	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+	++vcpu->stat.nmi_window_exits;
+
+	return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -2649,6 +2705,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_EXCEPTION_NMI]           = handle_exception,
 	[EXIT_REASON_EXTERNAL_INTERRUPT]      = handle_external_interrupt,
 	[EXIT_REASON_TRIPLE_FAULT]            = handle_triple_fault,
+	[EXIT_REASON_NMI_WINDOW]	      = handle_nmi_window,
 	[EXIT_REASON_IO_INSTRUCTION]          = handle_io,
 	[EXIT_REASON_CR_ACCESS]               = handle_cr,
 	[EXIT_REASON_DR_ACCESS]               = handle_dr,
@@ -2736,17 +2793,52 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
 	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
 }
 
+static void enable_nmi_window(struct kvm_vcpu *vcpu)
+{
+	u32 cpu_based_vm_exec_control;
+
+	if (!cpu_has_virtual_nmis())
+		return;
+
+	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+	cpu_based_vm_exec_control |= CPU_BASED_VIRTUAL_NMI_PENDING;
+	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+}
+
+static int vmx_nmi_enabled(struct kvm_vcpu *vcpu)
+{
+	u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	return !(guest_intr & (GUEST_INTR_STATE_NMI |
+			       GUEST_INTR_STATE_MOV_SS |
+			       GUEST_INTR_STATE_STI));
+}
+
+static int vmx_irq_enabled(struct kvm_vcpu *vcpu)
+{
+	u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	return (!(guest_intr & (GUEST_INTR_STATE_MOV_SS |
+			       GUEST_INTR_STATE_STI)) &&
+		(vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF));
+}
+
+static void enable_intr_window(struct kvm_vcpu *vcpu)
+{
+	if (vcpu->arch.nmi_pending)
+		enable_nmi_window(vcpu);
+	else if (kvm_cpu_has_interrupt(vcpu))
+		enable_irq_window(vcpu);
+}
+
 static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u32 idtv_info_field, intr_info_field;
-	int has_ext_irq, interrupt_window_open;
+	u32 idtv_info_field, intr_info_field, exit_intr_info_field;
 	int vector;
 
 	update_tpr_threshold(vcpu);
 
-	has_ext_irq = kvm_cpu_has_interrupt(vcpu);
 	intr_info_field = vmcs_read32(VM_ENTRY_INTR_INFO_FIELD);
+	exit_intr_info_field = vmcs_read32(VM_EXIT_INTR_INFO);
 	idtv_info_field = vmx->idt_vectoring_info;
 	if (intr_info_field & INTR_INFO_VALID_MASK) {
 		if (idtv_info_field & INTR_INFO_VALID_MASK) {
@@ -2754,8 +2846,7 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 			if (printk_ratelimit())
 				printk(KERN_ERR "Fault when IDT_Vectoring\n");
 		}
-		if (has_ext_irq)
-			enable_irq_window(vcpu);
+		enable_intr_window(vcpu);
 		return;
 	}
 	if (unlikely(idtv_info_field & INTR_INFO_VALID_MASK)) {
@@ -2765,30 +2856,56 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 			u8 vect = idtv_info_field & VECTORING_INFO_VECTOR_MASK;
 
 			vmx_inject_irq(vcpu, vect);
-			if (unlikely(has_ext_irq))
-				enable_irq_window(vcpu);
+			enable_intr_window(vcpu);
 			return;
 		}
 
 		KVMTRACE_1D(REDELIVER_EVT, vcpu, idtv_info_field, handler);
 
-		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field);
+		/*
+		 * SDM 3: 25.7.1.2
+		 * Clear bit "block by NMI" before VM entry if a NMI delivery
+		 * faulted.
+		 */
+		if ((idtv_info_field & VECTORING_INFO_TYPE_MASK)
+		    == INTR_TYPE_NMI_INTR && cpu_has_virtual_nmis())
+			vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+				vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+				~GUEST_INTR_STATE_NMI);
+
+		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field
+				& ~INTR_INFO_RESVD_BITS_MASK);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
 				vmcs_read32(VM_EXIT_INSTRUCTION_LEN));
 
 		if (unlikely(idtv_info_field & INTR_INFO_DELIVER_CODE_MASK))
 			vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE,
 				vmcs_read32(IDT_VECTORING_ERROR_CODE));
-		if (unlikely(has_ext_irq))
-			enable_irq_window(vcpu);
+		enable_intr_window(vcpu);
 		return;
 	}
-	if (!has_ext_irq)
+	if (cpu_has_virtual_nmis()) {
+		/*
+		 * SDM 3: 25.7.1.2
+		 * Re-set bit "block by NMI" before VM entry if vmexit caused by
+		 * a guest IRET fault.
+		 */
+		if ((exit_intr_info_field & INTR_INFO_UNBLOCK_NMI) &&
+		    (exit_intr_info_field & INTR_INFO_VECTOR_MASK) != 8)
+			vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+				vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) |
+				GUEST_INTR_STATE_NMI);
+		else if (vcpu->arch.nmi_pending) {
+			if (vmx_nmi_enabled(vcpu))
+				vmx_inject_nmi(vcpu);
+			enable_intr_window(vcpu);
+			return;
+		}
+
+	}
+	if (!kvm_cpu_has_interrupt(vcpu))
 		return;
-	interrupt_window_open =
-		((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
-		 (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0);
-	if (interrupt_window_open) {
+	if (vmx_irq_enabled(vcpu)) {
 		vector = kvm_cpu_get_interrupt(vcpu);
 		vmx_inject_irq(vcpu, vector);
 		kvm_timer_intr_post(vcpu, vector);
@@ -2838,7 +2955,7 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"push %%edx; push %%ebp;"
 		"push %%ecx \n\t"
 #endif
-		ASM_VMX_VMWRITE_RSP_RDX "\n\t"
+		__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
 		/* Check if vmlaunch of vmresume is needed */
 		"cmpl $0, %c[launched](%0) \n\t"
 		/* Load guest registers.  Don't clobber flags. */
@@ -2873,9 +2990,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 #endif
 		/* Enter guest mode */
 		"jne .Llaunched \n\t"
-		ASM_VMX_VMLAUNCH "\n\t"
+		__ex(ASM_VMX_VMLAUNCH) "\n\t"
 		"jmp .Lkvm_vmx_return \n\t"
-		".Llaunched: " ASM_VMX_VMRESUME "\n\t"
+		".Llaunched: " __ex(ASM_VMX_VMRESUME) "\n\t"
 		".Lkvm_vmx_return: "
 		/* Save guest registers, load host registers, keep flags */
 #ifdef CONFIG_X86_64
@@ -2949,7 +3066,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		fixup_rmode_irq(vmx);
 
 	vcpu->arch.interrupt_window_open =
-		(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0;
+		(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+		 (GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS)) == 0;
 
 	asm("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
 	vmx->launched = 1;
@@ -2957,7 +3075,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 
 	/* We need to handle NMIs before interrupts are enabled */
-	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200) { /* nmi */
+	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200 &&
+	    (intr_info & INTR_INFO_VALID_MASK)) {
 		KVMTRACE_0D(NMI, vcpu, handler);
 		asm("int $2");
 	}
@@ -2968,7 +3087,7 @@ static void vmx_free_vmcs(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	if (vmx->vmcs) {
-		on_each_cpu(__vcpu_clear, vmx, 1);
+		vcpu_clear(vmx);
 		free_vmcs(vmx->vmcs);
 		vmx->vmcs = NULL;
 	}
@@ -2999,15 +3118,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 		return ERR_PTR(-ENOMEM);
 
 	allocate_vpid(vmx);
-	if (id == 0 && vm_need_ept()) {
-		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
-			VMX_EPT_WRITABLE_MASK |
-			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
-		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
-				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
-				VMX_EPT_EXECUTABLE_MASK);
-		kvm_enable_tdp();
-	}
 
 	err = kvm_vcpu_init(&vmx->vcpu, kvm, id);
 	if (err)
@@ -3095,7 +3205,6 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.prepare_guest_switch = vmx_save_host_state,
 	.vcpu_load = vmx_vcpu_load,
 	.vcpu_put = vmx_vcpu_put,
-	.vcpu_decache = vmx_vcpu_decache,
 
 	.set_guest_debug = set_guest_debug,
 	.guest_debug_pre = kvm_guest_debug_pre,
@@ -3187,8 +3296,16 @@ static int __init vmx_init(void)
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
 
-	if (cpu_has_vmx_ept())
+	if (vm_need_ept()) {
 		bypass_guest_pf = 0;
+		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
+			VMX_EPT_WRITABLE_MASK |
+			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+		kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
+				VMX_EPT_EXECUTABLE_MASK);
+		kvm_enable_tdp();
+	} else
+		kvm_disable_tdp();
 
 	if (bypass_guest_pf)
 		kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 79d94c610df..23e8373507a 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -40,6 +40,7 @@
 #define CPU_BASED_CR8_LOAD_EXITING              0x00080000
 #define CPU_BASED_CR8_STORE_EXITING             0x00100000
 #define CPU_BASED_TPR_SHADOW                    0x00200000
+#define CPU_BASED_VIRTUAL_NMI_PENDING		0x00400000
 #define CPU_BASED_MOV_DR_EXITING                0x00800000
 #define CPU_BASED_UNCOND_IO_EXITING             0x01000000
 #define CPU_BASED_USE_IO_BITMAPS                0x02000000
@@ -216,7 +217,7 @@ enum vmcs_field {
 #define EXIT_REASON_TRIPLE_FAULT        2
 
 #define EXIT_REASON_PENDING_INTERRUPT   7
-
+#define EXIT_REASON_NMI_WINDOW		8
 #define EXIT_REASON_TASK_SWITCH         9
 #define EXIT_REASON_CPUID               10
 #define EXIT_REASON_HLT                 12
@@ -251,7 +252,9 @@ enum vmcs_field {
 #define INTR_INFO_VECTOR_MASK           0xff            /* 7:0 */
 #define INTR_INFO_INTR_TYPE_MASK        0x700           /* 10:8 */
 #define INTR_INFO_DELIVER_CODE_MASK     0x800           /* 11 */
+#define INTR_INFO_UNBLOCK_NMI		0x1000		/* 12 */
 #define INTR_INFO_VALID_MASK            0x80000000      /* 31 */
+#define INTR_INFO_RESVD_BITS_MASK       0x7ffff000
 
 #define VECTORING_INFO_VECTOR_MASK           	INTR_INFO_VECTOR_MASK
 #define VECTORING_INFO_TYPE_MASK        	INTR_INFO_INTR_TYPE_MASK
@@ -259,9 +262,16 @@ enum vmcs_field {
 #define VECTORING_INFO_VALID_MASK       	INTR_INFO_VALID_MASK
 
 #define INTR_TYPE_EXT_INTR              (0 << 8) /* external interrupt */
+#define INTR_TYPE_NMI_INTR		(2 << 8) /* NMI */
 #define INTR_TYPE_EXCEPTION             (3 << 8) /* processor exception */
 #define INTR_TYPE_SOFT_INTR             (4 << 8) /* software interrupt */
 
+/* GUEST_INTERRUPTIBILITY_INFO flags. */
+#define GUEST_INTR_STATE_STI		0x00000001
+#define GUEST_INTR_STATE_MOV_SS		0x00000002
+#define GUEST_INTR_STATE_SMI		0x00000004
+#define GUEST_INTR_STATE_NMI		0x00000008
+
 /*
  * Exit Qualifications for MOV for Control Register Access
  */
@@ -360,8 +370,6 @@ enum vmcs_field {
 #define VMX_EPT_READABLE_MASK			0x1ull
 #define VMX_EPT_WRITABLE_MASK			0x2ull
 #define VMX_EPT_EXECUTABLE_MASK			0x4ull
-#define VMX_EPT_FAKE_ACCESSED_MASK		(1ull << 62)
-#define VMX_EPT_FAKE_DIRTY_MASK			(1ull << 63)
 
 #define VMX_EPT_IDENTITY_PAGETABLE_ADDR		0xfffbc000ul
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0faa2546b1c..0d682fc6aeb 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -72,6 +72,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "mmio_exits", VCPU_STAT(mmio_exits) },
 	{ "signal_exits", VCPU_STAT(signal_exits) },
 	{ "irq_window", VCPU_STAT(irq_window_exits) },
+	{ "nmi_window", VCPU_STAT(nmi_window_exits) },
 	{ "halt_exits", VCPU_STAT(halt_exits) },
 	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
 	{ "hypercalls", VCPU_STAT(hypercalls) },
@@ -173,6 +174,12 @@ void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long addr,
 	kvm_queue_exception_e(vcpu, PF_VECTOR, error_code);
 }
 
+void kvm_inject_nmi(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.nmi_pending = 1;
+}
+EXPORT_SYMBOL_GPL(kvm_inject_nmi);
+
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 {
 	WARN_ON(vcpu->arch.exception.pending);
@@ -604,6 +611,38 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT);
 }
 
+static bool msr_mtrr_valid(unsigned msr)
+{
+	switch (msr) {
+	case 0x200 ... 0x200 + 2 * KVM_NR_VAR_MTRR - 1:
+	case MSR_MTRRfix64K_00000:
+	case MSR_MTRRfix16K_80000:
+	case MSR_MTRRfix16K_A0000:
+	case MSR_MTRRfix4K_C0000:
+	case MSR_MTRRfix4K_C8000:
+	case MSR_MTRRfix4K_D0000:
+	case MSR_MTRRfix4K_D8000:
+	case MSR_MTRRfix4K_E0000:
+	case MSR_MTRRfix4K_E8000:
+	case MSR_MTRRfix4K_F0000:
+	case MSR_MTRRfix4K_F8000:
+	case MSR_MTRRdefType:
+	case MSR_IA32_CR_PAT:
+		return true;
+	case 0x2f8:
+		return true;
+	}
+	return false;
+}
+
+static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	if (!msr_mtrr_valid(msr))
+		return 1;
+
+	vcpu->arch.mtrr[msr - 0x200] = data;
+	return 0;
+}
 
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
@@ -625,8 +664,9 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		break;
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_UCODE_WRITE:
-	case 0x200 ... 0x2ff: /* MTRRs */
 		break;
+	case 0x200 ... 0x2ff:
+		return set_msr_mtrr(vcpu, msr, data);
 	case MSR_IA32_APICBASE:
 		kvm_set_apic_base(vcpu, data);
 		break;
@@ -684,6 +724,15 @@ int kvm_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	return kvm_x86_ops->get_msr(vcpu, msr_index, pdata);
 }
 
+static int get_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+	if (!msr_mtrr_valid(msr))
+		return 1;
+
+	*pdata = vcpu->arch.mtrr[msr - 0x200];
+	return 0;
+}
+
 int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 {
 	u64 data;
@@ -705,11 +754,13 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_MC0_MISC+16:
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_EBL_CR_POWERON:
-		/* MTRR registers */
-	case 0xfe:
-	case 0x200 ... 0x2ff:
 		data = 0;
 		break;
+	case MSR_MTRRcap:
+		data = 0x500 | KVM_NR_VAR_MTRR;
+		break;
+	case 0x200 ... 0x2ff:
+		return get_msr_mtrr(vcpu, msr, pdata);
 	case 0xcd: /* fsb frequency */
 		data = 3;
 		break;
@@ -817,41 +868,6 @@ out:
 	return r;
 }
 
-/*
- * Make sure that a cpu that is being hot-unplugged does not have any vcpus
- * cached on it.
- */
-void decache_vcpus_on_cpu(int cpu)
-{
-	struct kvm *vm;
-	struct kvm_vcpu *vcpu;
-	int i;
-
-	spin_lock(&kvm_lock);
-	list_for_each_entry(vm, &vm_list, vm_list)
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = vm->vcpus[i];
-			if (!vcpu)
-				continue;
-			/*
-			 * If the vcpu is locked, then it is running on some
-			 * other cpu and therefore it is not cached on the
-			 * cpu in question.
-			 *
-			 * If it's not locked, check the last cpu it executed
-			 * on.
-			 */
-			if (mutex_trylock(&vcpu->mutex)) {
-				if (vcpu->cpu == cpu) {
-					kvm_x86_ops->vcpu_decache(vcpu);
-					vcpu->cpu = -1;
-				}
-				mutex_unlock(&vcpu->mutex);
-			}
-		}
-	spin_unlock(&kvm_lock);
-}
-
 int kvm_dev_ioctl_check_extension(long ext)
 {
 	int r;
@@ -867,8 +883,12 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PIT:
 	case KVM_CAP_NOP_IO_DELAY:
 	case KVM_CAP_MP_STATE:
+	case KVM_CAP_SYNC_MMU:
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	case KVM_CAP_VAPIC:
 		r = !kvm_x86_ops->cpu_has_accelerated_tpr();
 		break;
@@ -1476,6 +1496,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 		goto out;
 
 	down_write(&kvm->slots_lock);
+	spin_lock(&kvm->mmu_lock);
 
 	p = &kvm->arch.aliases[alias->slot];
 	p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT;
@@ -1487,6 +1508,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 			break;
 	kvm->arch.naliases = n;
 
+	spin_unlock(&kvm->mmu_lock);
 	kvm_mmu_zap_all(kvm);
 
 	up_write(&kvm->slots_lock);
@@ -1781,13 +1803,14 @@ static void kvm_init_msr_list(void)
  * Only apic need an MMIO device hook, so shortcut now..
  */
 static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr)
+						gpa_t addr, int len,
+						int is_write)
 {
 	struct kvm_io_device *dev;
 
 	if (vcpu->arch.apic) {
 		dev = &vcpu->arch.apic->dev;
-		if (dev->in_range(dev, addr))
+		if (dev->in_range(dev, addr, len, is_write))
 			return dev;
 	}
 	return NULL;
@@ -1795,13 +1818,15 @@ static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
 
 
 static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr)
+						gpa_t addr, int len,
+						int is_write)
 {
 	struct kvm_io_device *dev;
 
-	dev = vcpu_find_pervcpu_dev(vcpu, addr);
+	dev = vcpu_find_pervcpu_dev(vcpu, addr, len, is_write);
 	if (dev == NULL)
-		dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr);
+		dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len,
+					  is_write);
 	return dev;
 }
 
@@ -1869,7 +1894,7 @@ mmio:
 	 * Is this MMIO handled locally?
 	 */
 	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
 	if (mmio_dev) {
 		kvm_iodevice_read(mmio_dev, gpa, bytes, val);
 		mutex_unlock(&vcpu->kvm->lock);
@@ -1924,7 +1949,7 @@ mmio:
 	 * Is this MMIO handled locally?
 	 */
 	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
 	if (mmio_dev) {
 		kvm_iodevice_write(mmio_dev, gpa, bytes, val);
 		mutex_unlock(&vcpu->kvm->lock);
@@ -2020,6 +2045,7 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 
 int emulate_clts(struct kvm_vcpu *vcpu)
 {
+	KVMTRACE_0D(CLTS, vcpu, handler);
 	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 & ~X86_CR0_TS);
 	return X86EMUL_CONTINUE;
 }
@@ -2053,21 +2079,19 @@ int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long value)
 
 void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
 {
-	static int reported;
 	u8 opcodes[4];
 	unsigned long rip = vcpu->arch.rip;
 	unsigned long rip_linear;
 
-	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
-
-	if (reported)
+	if (!printk_ratelimit())
 		return;
 
+	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
+
 	emulator_read_std(rip_linear, (void *)opcodes, 4, vcpu);
 
 	printk(KERN_ERR "emulation failed (%s) rip %lx %02x %02x %02x %02x\n",
 	       context, rip, opcodes[0], opcodes[1], opcodes[2], opcodes[3]);
-	reported = 1;
 }
 EXPORT_SYMBOL_GPL(kvm_report_emulation_failure);
 
@@ -2105,27 +2129,6 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 			? X86EMUL_MODE_PROT64 :	cs_db
 			? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
 
-		if (vcpu->arch.emulate_ctxt.mode == X86EMUL_MODE_PROT64) {
-			vcpu->arch.emulate_ctxt.cs_base = 0;
-			vcpu->arch.emulate_ctxt.ds_base = 0;
-			vcpu->arch.emulate_ctxt.es_base = 0;
-			vcpu->arch.emulate_ctxt.ss_base = 0;
-		} else {
-			vcpu->arch.emulate_ctxt.cs_base =
-					get_segment_base(vcpu, VCPU_SREG_CS);
-			vcpu->arch.emulate_ctxt.ds_base =
-					get_segment_base(vcpu, VCPU_SREG_DS);
-			vcpu->arch.emulate_ctxt.es_base =
-					get_segment_base(vcpu, VCPU_SREG_ES);
-			vcpu->arch.emulate_ctxt.ss_base =
-					get_segment_base(vcpu, VCPU_SREG_SS);
-		}
-
-		vcpu->arch.emulate_ctxt.gs_base =
-					get_segment_base(vcpu, VCPU_SREG_GS);
-		vcpu->arch.emulate_ctxt.fs_base =
-					get_segment_base(vcpu, VCPU_SREG_FS);
-
 		r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 
 		/* Reject the instructions other than VMCALL/VMMCALL when
@@ -2300,9 +2303,10 @@ static void pio_string_write(struct kvm_io_device *pio_dev,
 }
 
 static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
-					       gpa_t addr)
+					       gpa_t addr, int len,
+					       int is_write)
 {
-	return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr);
+	return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr, len, is_write);
 }
 
 int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
@@ -2331,11 +2335,10 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 
 	kvm_x86_ops->cache_regs(vcpu);
 	memcpy(vcpu->arch.pio_data, &vcpu->arch.regs[VCPU_REGS_RAX], 4);
-	kvm_x86_ops->decache_regs(vcpu);
 
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
 
-	pio_dev = vcpu_find_pio_dev(vcpu, port);
+	pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
 	if (pio_dev) {
 		kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
 		complete_pio(vcpu);
@@ -2417,7 +2420,9 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		}
 	}
 
-	pio_dev = vcpu_find_pio_dev(vcpu, port);
+	pio_dev = vcpu_find_pio_dev(vcpu, port,
+				    vcpu->arch.pio.cur_count,
+				    !vcpu->arch.pio.in);
 	if (!vcpu->arch.pio.in) {
 		/* string PIO write */
 		ret = pio_copy_data(vcpu);
@@ -2600,27 +2605,41 @@ void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
 
 unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
 {
+	unsigned long value;
+
 	kvm_x86_ops->decache_cr4_guest_bits(vcpu);
 	switch (cr) {
 	case 0:
-		return vcpu->arch.cr0;
+		value = vcpu->arch.cr0;
+		break;
 	case 2:
-		return vcpu->arch.cr2;
+		value = vcpu->arch.cr2;
+		break;
 	case 3:
-		return vcpu->arch.cr3;
+		value = vcpu->arch.cr3;
+		break;
 	case 4:
-		return vcpu->arch.cr4;
+		value = vcpu->arch.cr4;
+		break;
 	case 8:
-		return kvm_get_cr8(vcpu);
+		value = kvm_get_cr8(vcpu);
+		break;
 	default:
 		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
 		return 0;
 	}
+	KVMTRACE_3D(CR_READ, vcpu, (u32)cr, (u32)value,
+		    (u32)((u64)value >> 32), handler);
+
+	return value;
 }
 
 void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
 		     unsigned long *rflags)
 {
+	KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr, (u32)val,
+		    (u32)((u64)val >> 32), handler);
+
 	switch (cr) {
 	case 0:
 		kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
@@ -2771,8 +2790,10 @@ static void vapic_exit(struct kvm_vcpu *vcpu)
 	if (!apic || !apic->vapic_addr)
 		return;
 
+	down_read(&vcpu->kvm->slots_lock);
 	kvm_release_page_dirty(apic->vapic_page);
 	mark_page_dirty(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
+	up_read(&vcpu->kvm->slots_lock);
 }
 
 static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
@@ -2928,9 +2949,7 @@ out:
 
 	post_kvm_run_save(vcpu, kvm_run);
 
-	down_read(&vcpu->kvm->slots_lock);
 	vapic_exit(vcpu);
-	up_read(&vcpu->kvm->slots_lock);
 
 	return r;
 }
@@ -2942,15 +2961,15 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	vcpu_load(vcpu);
 
+	if (vcpu->sigset_active)
+		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
+
 	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
 		kvm_vcpu_block(vcpu);
-		vcpu_put(vcpu);
-		return -EAGAIN;
+		r = -EAGAIN;
+		goto out;
 	}
 
-	if (vcpu->sigset_active)
-		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
-
 	/* re-sync apic's tpr */
 	if (!irqchip_in_kernel(vcpu->kvm))
 		kvm_set_cr8(vcpu, kvm_run->cr8);
@@ -3070,8 +3089,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	return 0;
 }
 
-static void get_segment(struct kvm_vcpu *vcpu,
-			struct kvm_segment *var, int seg)
+void kvm_get_segment(struct kvm_vcpu *vcpu,
+		     struct kvm_segment *var, int seg)
 {
 	kvm_x86_ops->get_segment(vcpu, var, seg);
 }
@@ -3080,7 +3099,7 @@ void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
 {
 	struct kvm_segment cs;
 
-	get_segment(vcpu, &cs, VCPU_SREG_CS);
+	kvm_get_segment(vcpu, &cs, VCPU_SREG_CS);
 	*db = cs.db;
 	*l = cs.l;
 }
@@ -3094,15 +3113,15 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 
 	vcpu_load(vcpu);
 
-	get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
-	get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
-	get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
-	get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
-	get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
-	get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+	kvm_get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+	kvm_get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+	kvm_get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+	kvm_get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+	kvm_get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+	kvm_get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
 
-	get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
-	get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+	kvm_get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+	kvm_get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	kvm_x86_ops->get_idt(vcpu, &dt);
 	sregs->idt.limit = dt.limit;
@@ -3154,7 +3173,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-static void set_segment(struct kvm_vcpu *vcpu,
+static void kvm_set_segment(struct kvm_vcpu *vcpu,
 			struct kvm_segment *var, int seg)
 {
 	kvm_x86_ops->set_segment(vcpu, var, seg);
@@ -3168,6 +3187,10 @@ static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
 	kvm_desct->base |= seg_desc->base2 << 24;
 	kvm_desct->limit = seg_desc->limit0;
 	kvm_desct->limit |= seg_desc->limit << 16;
+	if (seg_desc->g) {
+		kvm_desct->limit <<= 12;
+		kvm_desct->limit |= 0xfff;
+	}
 	kvm_desct->selector = selector;
 	kvm_desct->type = seg_desc->type;
 	kvm_desct->present = seg_desc->p;
@@ -3191,7 +3214,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
 	if (selector & 1 << 2) {
 		struct kvm_segment kvm_seg;
 
-		get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
+		kvm_get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
 
 		if (kvm_seg.unusable)
 			dtable->limit = 0;
@@ -3207,6 +3230,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
 static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
+	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -3216,13 +3240,16 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
 		return 1;
 	}
-	return kvm_read_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+	gpa += index * 8;
+	return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 /* allowed just for 8 bytes segments */
 static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
+	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -3230,7 +3257,9 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 
 	if (dtable.limit < index * 8 + 7)
 		return 1;
-	return kvm_write_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+	gpa += index * 8;
+	return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
@@ -3242,62 +3271,14 @@ static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
 	base_addr |= (seg_desc->base1 << 16);
 	base_addr |= (seg_desc->base2 << 24);
 
-	return base_addr;
-}
-
-static int load_tss_segment32(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_32 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_read_guest(vcpu->kvm, base_addr, tss,
-			      sizeof(struct tss_segment_32));
-}
-
-static int save_tss_segment32(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_32 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_write_guest(vcpu->kvm, base_addr, tss,
-			       sizeof(struct tss_segment_32));
-}
-
-static int load_tss_segment16(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_16 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_read_guest(vcpu->kvm, base_addr, tss,
-			      sizeof(struct tss_segment_16));
-}
-
-static int save_tss_segment16(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_16 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_write_guest(vcpu->kvm, base_addr, tss,
-			       sizeof(struct tss_segment_16));
+	return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
 }
 
 static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg)
 {
 	struct kvm_segment kvm_seg;
 
-	get_segment(vcpu, &kvm_seg, seg);
+	kvm_get_segment(vcpu, &kvm_seg, seg);
 	return kvm_seg.selector;
 }
 
@@ -3313,8 +3294,8 @@ static int load_segment_descriptor_to_kvm_desct(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-static int load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-				   int type_bits, int seg)
+int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
+				int type_bits, int seg)
 {
 	struct kvm_segment kvm_seg;
 
@@ -3327,7 +3308,7 @@ static int load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		if (!kvm_seg.s)
 			kvm_seg.unusable = 1;
 
-	set_segment(vcpu, &kvm_seg, seg);
+	kvm_set_segment(vcpu, &kvm_seg, seg);
 	return 0;
 }
 
@@ -3373,25 +3354,25 @@ static int load_state_from_tss32(struct kvm_vcpu *vcpu,
 	vcpu->arch.regs[VCPU_REGS_RSI] = tss->esi;
 	vcpu->arch.regs[VCPU_REGS_RDI] = tss->edi;
 
-	if (load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
+	if (kvm_load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
+	if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
+	if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
+	if (kvm_load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
+	if (kvm_load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
 		return 1;
 	return 0;
 }
@@ -3432,38 +3413,44 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 	vcpu->arch.regs[VCPU_REGS_RSI] = tss->si;
 	vcpu->arch.regs[VCPU_REGS_RDI] = tss->di;
 
-	if (load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
+	if (kvm_load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
+	if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
+	if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
 		return 1;
 	return 0;
 }
 
-int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       struct desc_struct *cseg_desc,
+static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
+		       u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_16 tss_segment_16;
 	int ret = 0;
 
-	if (load_tss_segment16(vcpu, cseg_desc, &tss_segment_16))
+	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+			   sizeof tss_segment_16))
 		goto out;
 
 	save_state_to_tss16(vcpu, &tss_segment_16);
-	save_tss_segment16(vcpu, cseg_desc, &tss_segment_16);
 
-	if (load_tss_segment16(vcpu, nseg_desc, &tss_segment_16))
+	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+			    sizeof tss_segment_16))
+		goto out;
+
+	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+			   &tss_segment_16, sizeof tss_segment_16))
 		goto out;
+
 	if (load_state_from_tss16(vcpu, &tss_segment_16))
 		goto out;
 
@@ -3472,21 +3459,27 @@ out:
 	return ret;
 }
 
-int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       struct desc_struct *cseg_desc,
+static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
+		       u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_32 tss_segment_32;
 	int ret = 0;
 
-	if (load_tss_segment32(vcpu, cseg_desc, &tss_segment_32))
+	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+			   sizeof tss_segment_32))
 		goto out;
 
 	save_state_to_tss32(vcpu, &tss_segment_32);
-	save_tss_segment32(vcpu, cseg_desc, &tss_segment_32);
 
-	if (load_tss_segment32(vcpu, nseg_desc, &tss_segment_32))
+	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+			    sizeof tss_segment_32))
+		goto out;
+
+	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+			   &tss_segment_32, sizeof tss_segment_32))
 		goto out;
+
 	if (load_state_from_tss32(vcpu, &tss_segment_32))
 		goto out;
 
@@ -3501,16 +3494,20 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	struct desc_struct cseg_desc;
 	struct desc_struct nseg_desc;
 	int ret = 0;
+	u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
+	u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
 
-	get_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+	old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base);
 
+	/* FIXME: Handle errors. Failure to read either TSS or their
+	 * descriptors should generate a pagefault.
+	 */
 	if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc))
 		goto out;
 
-	if (load_guest_segment_descriptor(vcpu, tr_seg.selector, &cseg_desc))
+	if (load_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc))
 		goto out;
 
-
 	if (reason != TASK_SWITCH_IRET) {
 		int cpl;
 
@@ -3528,8 +3525,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 
 	if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
 		cseg_desc.type &= ~(1 << 1); //clear the B flag
-		save_guest_segment_descriptor(vcpu, tr_seg.selector,
-					      &cseg_desc);
+		save_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc);
 	}
 
 	if (reason == TASK_SWITCH_IRET) {
@@ -3541,10 +3537,10 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	kvm_x86_ops->cache_regs(vcpu);
 
 	if (nseg_desc.type & 8)
-		ret = kvm_task_switch_32(vcpu, tss_selector, &cseg_desc,
+		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base,
 					 &nseg_desc);
 	else
-		ret = kvm_task_switch_16(vcpu, tss_selector, &cseg_desc,
+		ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_base,
 					 &nseg_desc);
 
 	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
@@ -3561,7 +3557,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 | X86_CR0_TS);
 	seg_desct_to_kvm_desct(&nseg_desc, tss_selector, &tr_seg);
 	tr_seg.type = 11;
-	set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+	kvm_set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
 out:
 	kvm_x86_ops->decache_regs(vcpu);
 	return ret;
@@ -3628,15 +3624,15 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 		}
 	}
 
-	set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
-	set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
-	set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
-	set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
-	set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
-	set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+	kvm_set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+	kvm_set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+	kvm_set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+	kvm_set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+	kvm_set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+	kvm_set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
 
-	set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
-	set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+	kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+	kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	vcpu_put(vcpu);
 
@@ -3751,14 +3747,14 @@ void fx_init(struct kvm_vcpu *vcpu)
 	 * allocate ram with GFP_KERNEL.
 	 */
 	if (!used_math())
-		fx_save(&vcpu->arch.host_fx_image);
+		kvm_fx_save(&vcpu->arch.host_fx_image);
 
 	/* Initialize guest FPU by resetting ours and saving into guest's */
 	preempt_disable();
-	fx_save(&vcpu->arch.host_fx_image);
-	fx_finit();
-	fx_save(&vcpu->arch.guest_fx_image);
-	fx_restore(&vcpu->arch.host_fx_image);
+	kvm_fx_save(&vcpu->arch.host_fx_image);
+	kvm_fx_finit();
+	kvm_fx_save(&vcpu->arch.guest_fx_image);
+	kvm_fx_restore(&vcpu->arch.host_fx_image);
 	preempt_enable();
 
 	vcpu->arch.cr0 |= X86_CR0_ET;
@@ -3775,8 +3771,8 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 		return;
 
 	vcpu->guest_fpu_loaded = 1;
-	fx_save(&vcpu->arch.host_fx_image);
-	fx_restore(&vcpu->arch.guest_fx_image);
+	kvm_fx_save(&vcpu->arch.host_fx_image);
+	kvm_fx_restore(&vcpu->arch.guest_fx_image);
 }
 EXPORT_SYMBOL_GPL(kvm_load_guest_fpu);
 
@@ -3786,8 +3782,8 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 		return;
 
 	vcpu->guest_fpu_loaded = 0;
-	fx_save(&vcpu->arch.guest_fx_image);
-	fx_restore(&vcpu->arch.host_fx_image);
+	kvm_fx_save(&vcpu->arch.guest_fx_image);
+	kvm_fx_restore(&vcpu->arch.host_fx_image);
 	++vcpu->stat.fpu_reload;
 }
 EXPORT_SYMBOL_GPL(kvm_put_guest_fpu);
@@ -3979,16 +3975,23 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	 */
 	if (!user_alloc) {
 		if (npages && !old.rmap) {
+			unsigned long userspace_addr;
+
 			down_write(&current->mm->mmap_sem);
-			memslot->userspace_addr = do_mmap(NULL, 0,
-						     npages * PAGE_SIZE,
-						     PROT_READ | PROT_WRITE,
-						     MAP_SHARED | MAP_ANONYMOUS,
-						     0);
+			userspace_addr = do_mmap(NULL, 0,
+						 npages * PAGE_SIZE,
+						 PROT_READ | PROT_WRITE,
+						 MAP_SHARED | MAP_ANONYMOUS,
+						 0);
 			up_write(&current->mm->mmap_sem);
 
-			if (IS_ERR((void *)memslot->userspace_addr))
-				return PTR_ERR((void *)memslot->userspace_addr);
+			if (IS_ERR((void *)userspace_addr))
+				return PTR_ERR((void *)userspace_addr);
+
+			/* set userspace_addr atomically for kvm_hva_to_rmapp */
+			spin_lock(&kvm->mmu_lock);
+			memslot->userspace_addr = userspace_addr;
+			spin_unlock(&kvm->mmu_lock);
 		} else {
 			if (!old.user_alloc && old.rmap) {
 				int ret;
@@ -4016,6 +4019,11 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+	kvm_mmu_zap_all(kvm);
+}
+
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 932f216d890..f2f90468f8b 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -121,7 +121,7 @@ static u16 opcode_table[256] = {
 	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
 	0, 0, 0, 0,
 	/* 0x68 - 0x6F */
-	0, 0, ImplicitOps | Mov | Stack, 0,
+	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
 	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
 	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
 	/* 0x70 - 0x77 */
@@ -138,9 +138,11 @@ static u16 opcode_table[256] = {
 	/* 0x88 - 0x8F */
 	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
 	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	0, ModRM | DstReg, 0, Group | Group1A,
-	/* 0x90 - 0x9F */
-	0, 0, 0, 0, 0, 0, 0, 0,
+	DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
+	DstReg | SrcMem | ModRM | Mov, Group | Group1A,
+	/* 0x90 - 0x97 */
+	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
+	/* 0x98 - 0x9F */
 	0, 0, 0, 0, ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
 	/* 0xA0 - 0xA7 */
 	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
@@ -152,7 +154,8 @@ static u16 opcode_table[256] = {
 	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
 	ByteOp | ImplicitOps | String, ImplicitOps | String,
 	/* 0xB0 - 0xBF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	DstReg | SrcImm | Mov, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xC0 - 0xC7 */
 	ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
 	0, ImplicitOps | Stack, 0, 0,
@@ -168,7 +171,8 @@ static u16 opcode_table[256] = {
 	/* 0xE0 - 0xE7 */
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xE8 - 0xEF */
-	ImplicitOps | Stack, SrcImm|ImplicitOps, 0, SrcImmByte|ImplicitOps,
+	ImplicitOps | Stack, SrcImm | ImplicitOps,
+	ImplicitOps, SrcImmByte | ImplicitOps,
 	0, 0, 0, 0,
 	/* 0xF0 - 0xF7 */
 	0, 0, 0, 0,
@@ -215,7 +219,7 @@ static u16 twobyte_table[256] = {
 	/* 0xA0 - 0xA7 */
 	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
 	/* 0xA8 - 0xAF */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
+	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, ModRM, 0,
 	/* 0xB0 - 0xB7 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
 	    DstMem | SrcReg | ModRM | BitOp,
@@ -518,6 +522,39 @@ static inline void jmp_rel(struct decode_cache *c, int rel)
 	register_address_increment(c, &c->eip, rel);
 }
 
+static void set_seg_override(struct decode_cache *c, int seg)
+{
+	c->has_seg_override = true;
+	c->seg_override = seg;
+}
+
+static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
+{
+	if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
+		return 0;
+
+	return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
+}
+
+static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
+				       struct decode_cache *c)
+{
+	if (!c->has_seg_override)
+		return 0;
+
+	return seg_base(ctxt, c->seg_override);
+}
+
+static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_ES);
+}
+
+static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_SS);
+}
+
 static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
 			      struct x86_emulate_ops *ops,
 			      unsigned long linear, u8 *dest)
@@ -660,7 +697,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 {
 	struct decode_cache *c = &ctxt->decode;
 	u8 sib;
-	int index_reg = 0, base_reg = 0, scale, rip_relative = 0;
+	int index_reg = 0, base_reg = 0, scale;
 	int rc = 0;
 
 	if (c->rex_prefix) {
@@ -731,47 +768,28 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 		}
 		if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
 		    (c->modrm_rm == 6 && c->modrm_mod != 0))
-			if (!c->override_base)
-				c->override_base = &ctxt->ss_base;
+			if (!c->has_seg_override)
+				set_seg_override(c, VCPU_SREG_SS);
 		c->modrm_ea = (u16)c->modrm_ea;
 	} else {
 		/* 32/64-bit ModR/M decode. */
-		switch (c->modrm_rm) {
-		case 4:
-		case 12:
+		if ((c->modrm_rm & 7) == 4) {
 			sib = insn_fetch(u8, 1, c->eip);
 			index_reg |= (sib >> 3) & 7;
 			base_reg |= sib & 7;
 			scale = sib >> 6;
 
-			switch (base_reg) {
-			case 5:
-				if (c->modrm_mod != 0)
-					c->modrm_ea += c->regs[base_reg];
-				else
-					c->modrm_ea +=
-						insn_fetch(s32, 4, c->eip);
-				break;
-			default:
+			if ((base_reg & 7) == 5 && c->modrm_mod == 0)
+				c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			else
 				c->modrm_ea += c->regs[base_reg];
-			}
-			switch (index_reg) {
-			case 4:
-				break;
-			default:
+			if (index_reg != 4)
 				c->modrm_ea += c->regs[index_reg] << scale;
-			}
-			break;
-		case 5:
-			if (c->modrm_mod != 0)
-				c->modrm_ea += c->regs[c->modrm_rm];
-			else if (ctxt->mode == X86EMUL_MODE_PROT64)
-				rip_relative = 1;
-			break;
-		default:
+		} else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
+			if (ctxt->mode == X86EMUL_MODE_PROT64)
+				c->rip_relative = 1;
+		} else
 			c->modrm_ea += c->regs[c->modrm_rm];
-			break;
-		}
 		switch (c->modrm_mod) {
 		case 0:
 			if (c->modrm_rm == 5)
@@ -785,22 +803,6 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 			break;
 		}
 	}
-	if (rip_relative) {
-		c->modrm_ea += c->eip;
-		switch (c->d & SrcMask) {
-		case SrcImmByte:
-			c->modrm_ea += 1;
-			break;
-		case SrcImm:
-			if (c->d & ByteOp)
-				c->modrm_ea += 1;
-			else
-				if (c->op_bytes == 8)
-					c->modrm_ea += 4;
-				else
-					c->modrm_ea += c->op_bytes;
-		}
-	}
 done:
 	return rc;
 }
@@ -838,6 +840,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 
 	memset(c, 0, sizeof(struct decode_cache));
 	c->eip = ctxt->vcpu->arch.rip;
+	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
 	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 
 	switch (mode) {
@@ -876,23 +879,15 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 				/* switch between 2/4 bytes */
 				c->ad_bytes = def_ad_bytes ^ 6;
 			break;
+		case 0x26:	/* ES override */
 		case 0x2e:	/* CS override */
-			c->override_base = &ctxt->cs_base;
-			break;
+		case 0x36:	/* SS override */
 		case 0x3e:	/* DS override */
-			c->override_base = &ctxt->ds_base;
-			break;
-		case 0x26:	/* ES override */
-			c->override_base = &ctxt->es_base;
+			set_seg_override(c, (c->b >> 3) & 3);
 			break;
 		case 0x64:	/* FS override */
-			c->override_base = &ctxt->fs_base;
-			break;
 		case 0x65:	/* GS override */
-			c->override_base = &ctxt->gs_base;
-			break;
-		case 0x36:	/* SS override */
-			c->override_base = &ctxt->ss_base;
+			set_seg_override(c, c->b & 7);
 			break;
 		case 0x40 ... 0x4f: /* REX */
 			if (mode != X86EMUL_MODE_PROT64)
@@ -964,15 +959,11 @@ done_prefixes:
 	if (rc)
 		goto done;
 
-	if (!c->override_base)
-		c->override_base = &ctxt->ds_base;
-	if (mode == X86EMUL_MODE_PROT64 &&
-	    c->override_base != &ctxt->fs_base &&
-	    c->override_base != &ctxt->gs_base)
-		c->override_base = NULL;
+	if (!c->has_seg_override)
+		set_seg_override(c, VCPU_SREG_DS);
 
-	if (c->override_base)
-		c->modrm_ea += *c->override_base;
+	if (!(!c->twobyte && c->b == 0x8d))
+		c->modrm_ea += seg_override_base(ctxt, c);
 
 	if (c->ad_bytes != 8)
 		c->modrm_ea = (u32)c->modrm_ea;
@@ -1049,6 +1040,7 @@ done_prefixes:
 		break;
 	case DstMem:
 		if ((c->d & ModRM) && c->modrm_mod == 3) {
+			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 			c->dst.type = OP_REG;
 			c->dst.val = c->dst.orig_val = c->modrm_val;
 			c->dst.ptr = c->modrm_ptr;
@@ -1058,6 +1050,9 @@ done_prefixes:
 		break;
 	}
 
+	if (c->rip_relative)
+		c->modrm_ea += c->eip;
+
 done:
 	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
 }
@@ -1070,7 +1065,7 @@ static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
 	c->dst.bytes = c->op_bytes;
 	c->dst.val = c->src.val;
 	register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
-	c->dst.ptr = (void *) register_address(c, ctxt->ss_base,
+	c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
 					       c->regs[VCPU_REGS_RSP]);
 }
 
@@ -1080,7 +1075,7 @@ static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
 	struct decode_cache *c = &ctxt->decode;
 	int rc;
 
-	rc = ops->read_std(register_address(c, ctxt->ss_base,
+	rc = ops->read_std(register_address(c, ss_base(ctxt),
 					    c->regs[VCPU_REGS_RSP]),
 			   &c->dst.val, c->dst.bytes, ctxt->vcpu);
 	if (rc != 0)
@@ -1402,11 +1397,11 @@ special_insn:
 		register_address_increment(c, &c->regs[VCPU_REGS_RSP],
 					   -c->op_bytes);
 		c->dst.ptr = (void *) register_address(
-			c, ctxt->ss_base, c->regs[VCPU_REGS_RSP]);
+			c, ss_base(ctxt), c->regs[VCPU_REGS_RSP]);
 		break;
 	case 0x58 ... 0x5f: /* pop reg */
 	pop_instruction:
-		if ((rc = ops->read_std(register_address(c, ctxt->ss_base,
+		if ((rc = ops->read_std(register_address(c, ss_base(ctxt),
 			c->regs[VCPU_REGS_RSP]), c->dst.ptr,
 			c->op_bytes, ctxt->vcpu)) != 0)
 			goto done;
@@ -1420,9 +1415,8 @@ special_insn:
 			goto cannot_emulate;
 		c->dst.val = (s32) c->src.val;
 		break;
+	case 0x68: /* push imm */
 	case 0x6a: /* push imm8 */
-		c->src.val = 0L;
-		c->src.val = insn_fetch(s8, 1, c->eip);
 		emulate_push(ctxt);
 		break;
 	case 0x6c:		/* insb */
@@ -1433,7 +1427,7 @@ special_insn:
 				c->rep_prefix ?
 				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
 				(ctxt->eflags & EFLG_DF),
-				register_address(c, ctxt->es_base,
+				register_address(c, es_base(ctxt),
 						 c->regs[VCPU_REGS_RDI]),
 				c->rep_prefix,
 				c->regs[VCPU_REGS_RDX]) == 0) {
@@ -1449,9 +1443,8 @@ special_insn:
 				c->rep_prefix ?
 				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
 				(ctxt->eflags & EFLG_DF),
-				register_address(c, c->override_base ?
-							*c->override_base :
-							ctxt->ds_base,
+					 register_address(c,
+					  seg_override_base(ctxt, c),
 						 c->regs[VCPU_REGS_RSI]),
 				c->rep_prefix,
 				c->regs[VCPU_REGS_RDX]) == 0) {
@@ -1490,6 +1483,7 @@ special_insn:
 		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0x86 ... 0x87:	/* xchg */
+	xchg:
 		/* Write back the register source. */
 		switch (c->dst.bytes) {
 		case 1:
@@ -1514,14 +1508,60 @@ special_insn:
 		break;
 	case 0x88 ... 0x8b:	/* mov */
 		goto mov;
+	case 0x8c: { /* mov r/m, sreg */
+		struct kvm_segment segreg;
+
+		if (c->modrm_reg <= 5)
+			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
+		else {
+			printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
+			       c->modrm);
+			goto cannot_emulate;
+		}
+		c->dst.val = segreg.selector;
+		break;
+	}
 	case 0x8d: /* lea r16/r32, m */
 		c->dst.val = c->modrm_ea;
 		break;
+	case 0x8e: { /* mov seg, r/m16 */
+		uint16_t sel;
+		int type_bits;
+		int err;
+
+		sel = c->src.val;
+		if (c->modrm_reg <= 5) {
+			type_bits = (c->modrm_reg == 1) ? 9 : 1;
+			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
+							  type_bits, c->modrm_reg);
+		} else {
+			printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
+					c->modrm);
+			goto cannot_emulate;
+		}
+
+		if (err < 0)
+			goto cannot_emulate;
+
+		c->dst.type = OP_NONE;  /* Disable writeback. */
+		break;
+	}
 	case 0x8f:		/* pop (sole member of Grp1a) */
 		rc = emulate_grp1a(ctxt, ops);
 		if (rc != 0)
 			goto done;
 		break;
+	case 0x90: /* nop / xchg r8,rax */
+		if (!(c->rex_prefix & 1)) { /* nop */
+			c->dst.type = OP_NONE;
+			break;
+		}
+	case 0x91 ... 0x97: /* xchg reg,rax */
+		c->src.type = c->dst.type = OP_REG;
+		c->src.bytes = c->dst.bytes = c->op_bytes;
+		c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
+		c->src.val = *(c->src.ptr);
+		goto xchg;
 	case 0x9c: /* pushf */
 		c->src.val =  (unsigned long) ctxt->eflags;
 		emulate_push(ctxt);
@@ -1540,11 +1580,10 @@ special_insn:
 		c->dst.type = OP_MEM;
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		if ((rc = ops->read_emulated(register_address(c,
-		      c->override_base ? *c->override_base :
-					ctxt->ds_base,
+					   seg_override_base(ctxt, c),
 					c->regs[VCPU_REGS_RSI]),
 					&c->dst.val,
 					c->dst.bytes, ctxt->vcpu)) != 0)
@@ -1560,8 +1599,7 @@ special_insn:
 		c->src.type = OP_NONE; /* Disable writeback. */
 		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->src.ptr = (unsigned long *)register_address(c,
-				c->override_base ? *c->override_base :
-						   ctxt->ds_base,
+				       seg_override_base(ctxt, c),
 						   c->regs[VCPU_REGS_RSI]);
 		if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
 						&c->src.val,
@@ -1572,7 +1610,7 @@ special_insn:
 		c->dst.type = OP_NONE; /* Disable writeback. */
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
 						&c->dst.val,
@@ -1596,7 +1634,7 @@ special_insn:
 		c->dst.type = OP_MEM;
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		c->dst.val = c->regs[VCPU_REGS_RAX];
 		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
@@ -1608,8 +1646,7 @@ special_insn:
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
 		if ((rc = ops->read_emulated(register_address(c,
-				c->override_base ? *c->override_base :
-						   ctxt->ds_base,
+						 seg_override_base(ctxt, c),
 						 c->regs[VCPU_REGS_RSI]),
 						 &c->dst.val,
 						 c->dst.bytes,
@@ -1622,6 +1659,8 @@ special_insn:
 	case 0xae ... 0xaf:	/* scas */
 		DPRINTF("Urk! I don't handle SCAS.\n");
 		goto cannot_emulate;
+	case 0xb8: /* mov r, imm */
+		goto mov;
 	case 0xc0 ... 0xc1:
 		emulate_grp2(ctxt);
 		break;
@@ -1660,13 +1699,39 @@ special_insn:
 		break;
 	}
 	case 0xe9: /* jmp rel */
-	case 0xeb: /* jmp rel short */
+		goto jmp;
+	case 0xea: /* jmp far */ {
+		uint32_t eip;
+		uint16_t sel;
+
+		switch (c->op_bytes) {
+		case 2:
+			eip = insn_fetch(u16, 2, c->eip);
+			break;
+		case 4:
+			eip = insn_fetch(u32, 4, c->eip);
+			break;
+		default:
+			DPRINTF("jmp far: Invalid op_bytes\n");
+			goto cannot_emulate;
+		}
+		sel = insn_fetch(u16, 2, c->eip);
+		if (kvm_load_segment_descriptor(ctxt->vcpu, sel, 9, VCPU_SREG_CS) < 0) {
+			DPRINTF("jmp far: Failed to load CS descriptor\n");
+			goto cannot_emulate;
+		}
+
+		c->eip = eip;
+		break;
+	}
+	case 0xeb:
+	      jmp:		/* jmp rel short */
 		jmp_rel(c, c->src.val);
 		c->dst.type = OP_NONE; /* Disable writeback. */
 		break;
 	case 0xf4:              /* hlt */
 		ctxt->vcpu->arch.halt_request = 1;
-		goto done;
+		break;
 	case 0xf5:	/* cmc */
 		/* complement carry flag from eflags reg */
 		ctxt->eflags ^= EFLG_CF;
@@ -1882,6 +1947,8 @@ twobyte_insn:
 		c->src.val &= (c->dst.bytes << 3) - 1;
 		emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0xae:              /* clflush */
+		break;
 	case 0xb0 ... 0xb1:	/* cmpxchg */
 		/*
 		 * Save real source value, then compare EAX against
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 50dad44fb54..d9249a882aa 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -991,7 +991,6 @@ __init void lguest_init(void)
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* apic read/write intercepts */
 	pv_apic_ops.apic_write = lguest_apic_write;
-	pv_apic_ops.apic_write_atomic = lguest_apic_write;
 	pv_apic_ops.apic_read = lguest_apic_read;
 #endif
 
@@ -1015,6 +1014,9 @@ __init void lguest_init(void)
 	init_pg_tables_start = __pa(pg0);
 	init_pg_tables_end = __pa(pg0);
 
+	/* As described in head_32.S, we map the first 128M of memory. */
+	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
+
 	/* Load the %fs segment register (the per-cpu segment register) with
 	 * the normal data segment to get through booting. */
 	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index dfdf428975c..f118c110af3 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -52,7 +52,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 40e0e309d27..cb0c112386f 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -32,7 +32,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
@@ -108,7 +108,6 @@ ENTRY(__copy_user_nocache)
 	jmp 60f
 50:	movl %ecx,%edx
 60:	sfence
-	movl %r8d,%ecx
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
index d5a2b39f882..01b868ba82f 100644
--- a/arch/x86/lib/msr-on-cpu.c
+++ b/arch/x86/lib/msr-on-cpu.c
@@ -30,10 +30,11 @@ static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
 
 	rv.msr_no = msr_no;
 	if (safe) {
-		smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
-		err = rv.err;
+		err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu,
+					       &rv, 1);
+		err = err ? err : rv.err;
 	} else {
-		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
+		err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
 	}
 	*l = rv.l;
 	*h = rv.h;
@@ -64,23 +65,24 @@ static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
 	rv.l = l;
 	rv.h = h;
 	if (safe) {
-		smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
-		err = rv.err;
+		err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu,
+					       &rv, 1);
+		err = err ? err : rv.err;
 	} else {
-		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+		err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
 	}
 
 	return err;
 }
 
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
-	_wrmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return _wrmsr_on_cpu(cpu, msr_no, l, h, 0);
 }
 
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
-	_rdmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return _rdmsr_on_cpu(cpu, msr_no, l, h, 0);
 }
 
 /* These "safe" variants are slower and should be used when the target MSR
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 48278fa7d3d..3d317836be9 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -10,14 +10,6 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
-/*
- * Any quirks to be performed to initialize timers/irqs/etc?
- */
-int (*arch_time_init_quirk)(void);
-int (*arch_pre_intr_init_quirk)(void);
-int (*arch_intr_init_quirk)(void);
-int (*arch_trap_init_quirk)(void);
-
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
 #else
@@ -37,8 +29,8 @@ int no_broadcast=DEFAULT_SEND_IPI;
  **/
 void __init pre_intr_init_hook(void)
 {
-	if (arch_pre_intr_init_quirk) {
-		if (arch_pre_intr_init_quirk())
+	if (x86_quirks->arch_pre_intr_init) {
+		if (x86_quirks->arch_pre_intr_init())
 			return;
 	}
 	init_ISA_irqs();
@@ -64,8 +56,8 @@ static struct irqaction irq2 = {
  **/
 void __init intr_init_hook(void)
 {
-	if (arch_intr_init_quirk) {
-		if (arch_intr_init_quirk())
+	if (x86_quirks->arch_intr_init) {
+		if (x86_quirks->arch_intr_init())
 			return;
 	}
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -97,8 +89,8 @@ void __init pre_setup_arch_hook(void)
  **/
 void __init trap_init_hook(void)
 {
-	if (arch_trap_init_quirk) {
-		if (arch_trap_init_quirk())
+	if (x86_quirks->arch_trap_init) {
+		if (x86_quirks->arch_trap_init())
 			return;
 	}
 }
@@ -111,6 +103,16 @@ static struct irqaction irq0  = {
 };
 
 /**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+	if (x86_quirks->arch_pre_time_init)
+		x86_quirks->arch_pre_time_init();
+}
+
+/**
  * time_init_hook - do any specific initialisations for the system timer.
  *
  * Description:
@@ -119,13 +121,13 @@ static struct irqaction irq0  = {
  **/
 void __init time_init_hook(void)
 {
-	if (arch_time_init_quirk) {
+	if (x86_quirks->arch_time_init) {
 		/*
 		 * A nonzero return code does not mean failure, it means
 		 * that the architecture quirk does not want any
 		 * generic (timer) setup to be performed after this:
 		 */
-		if (arch_time_init_quirk())
+		if (x86_quirks->arch_time_init())
 			return;
 	}
 
diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
index 4354ce80488..50189af14b8 100644
--- a/arch/x86/mach-es7000/es7000plat.c
+++ b/arch/x86/mach-es7000/es7000plat.c
@@ -130,10 +130,10 @@ parse_unisys_oem (char *oemptr)
 			mip_addr = val;
 			mip = (struct mip_reg *)val;
 			mip_reg = __va(mip);
-			Dprintk("es7000_mipcfg: host_reg = 0x%lx \n",
-				(unsigned long)host_reg);
-			Dprintk("es7000_mipcfg: mip_reg = 0x%lx \n",
-				(unsigned long)mip_reg);
+			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+				 (unsigned long)host_reg);
+			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+				 (unsigned long)mip_reg);
 			success++;
 			break;
 		case MIP_PSAI_REG:
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
index a037041817c..4f4e50c3ad3 100644
--- a/arch/x86/mach-rdc321x/platform.c
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -25,7 +25,6 @@
 #include <linux/list.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/version.h>
 #include <linux/leds.h>
 
 #include <asm/gpio.h>
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 9873716e9f7..dfb932dcf13 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,5 +1,5 @@
 obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o
+	    pat.o pgtable.o gup.o
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o
 
@@ -21,3 +21,4 @@ obj-$(CONFIG_K8_NUMA)		+= k8topology_64.o
 endif
 obj-$(CONFIG_ACPI_NUMA)		+= srat_$(BITS).o
 
+obj-$(CONFIG_MEMTEST)		+= memtest.o
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 5dfef9fa061..62fa440678d 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -42,7 +42,6 @@
 
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node0_bdata;
 
 /*
  * numa interface - we expect the numa architecture specific code to have
@@ -385,7 +384,7 @@ void __init initmem_init(unsigned long start_pfn,
 	for_each_online_node(nid)
 		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(0)->bdata = &node0_bdata;
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
 	setup_bootmem_allocator();
 }
 
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 0bb0caed897..a20d1fa64b4 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -148,8 +148,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot) & ~(PTE_MASK);
-	cur = pgprot_val(st->current_prot) & ~(PTE_MASK);
+	prot = pgprot_val(new_prot) & ~(PTE_PFN_MASK);
+	cur = pgprot_val(st->current_prot) & ~(PTE_PFN_MASK);
 
 	if (!st->level) {
 		/* First entry */
@@ -221,7 +221,7 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
 	for (i = 0; i < PTRS_PER_PMD; i++) {
 		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
 		if (!pmd_none(*start)) {
-			pgprotval_t prot = pmd_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pmd_val(*start) & PTE_FLAGS_MASK;
 
 			if (pmd_large(*start) || !pmd_present(*start))
 				note_page(m, st, __pgprot(prot), 3);
@@ -253,7 +253,7 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 	for (i = 0; i < PTRS_PER_PUD; i++) {
 		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
 		if (!pud_none(*start)) {
-			pgprotval_t prot = pud_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pud_val(*start) & PTE_FLAGS_MASK;
 
 			if (pud_large(*start) || !pud_present(*start))
 				note_page(m, st, __pgprot(prot), 2);
@@ -288,7 +288,7 @@ static void walk_pgd_level(struct seq_file *m)
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
 		if (!pgd_none(*start)) {
-			pgprotval_t prot = pgd_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pgd_val(*start) & PTE_FLAGS_MASK;
 
 			if (pgd_large(*start) || !pgd_present(*start))
 				note_page(m, &st, __pgprot(prot), 1);
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
new file mode 100644
index 00000000000..007bb06c750
--- /dev/null
+++ b/arch/x86/mm/gup.c
@@ -0,0 +1,298 @@
+/*
+ * Lockless get_user_pages_fast for x86
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmstat.h>
+#include <linux/highmem.h>
+
+#include <asm/pgtable.h>
+
+static inline pte_t gup_get_pte(pte_t *ptep)
+{
+#ifndef CONFIG_X86_PAE
+	return *ptep;
+#else
+	/*
+	 * With get_user_pages_fast, we walk down the pagetables without taking
+	 * any locks.  For this we would like to load the pointers atoimcally,
+	 * but that is not possible (without expensive cmpxchg8b) on PAE.  What
+	 * we do have is the guarantee that a pte will only either go from not
+	 * present to present, or present to not present or both -- it will not
+	 * switch to a completely different present page without a TLB flush in
+	 * between; something that we are blocking by holding interrupts off.
+	 *
+	 * Setting ptes from not present to present goes:
+	 * ptep->pte_high = h;
+	 * smp_wmb();
+	 * ptep->pte_low = l;
+	 *
+	 * And present to not present goes:
+	 * ptep->pte_low = 0;
+	 * smp_wmb();
+	 * ptep->pte_high = 0;
+	 *
+	 * We must ensure here that the load of pte_low sees l iff pte_high
+	 * sees h. We load pte_high *after* loading pte_low, which ensures we
+	 * don't see an older value of pte_high.  *Then* we recheck pte_low,
+	 * which ensures that we haven't picked up a changed pte high. We might
+	 * have got rubbish values from pte_low and pte_high, but we are
+	 * guaranteed that pte_low will not have the present bit set *unless*
+	 * it is 'l'. And get_user_pages_fast only operates on present ptes, so
+	 * we're safe.
+	 *
+	 * gup_get_pte should not be used or copied outside gup.c without being
+	 * very careful -- it does not atomically load the pte or anything that
+	 * is likely to be useful for you.
+	 */
+	pte_t pte;
+
+retry:
+	pte.pte_low = ptep->pte_low;
+	smp_rmb();
+	pte.pte_high = ptep->pte_high;
+	smp_rmb();
+	if (unlikely(pte.pte_low != ptep->pte_low))
+		goto retry;
+
+	return pte;
+#endif
+}
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t *ptep;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+
+	ptep = pte_offset_map(&pmd, addr);
+	do {
+		pte_t pte = gup_get_pte(ptep);
+		struct page *page;
+
+		if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) {
+			pte_unmap(ptep);
+			return 0;
+		}
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		get_page(page);
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+	pte_unmap(ptep - 1);
+
+	return 1;
+}
+
+static inline void get_head_page_multiple(struct page *page, int nr)
+{
+	VM_BUG_ON(page != compound_head(page));
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(nr, &page->_count);
+}
+
+static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pmd;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (unlikely(pmd_large(pmd))) {
+			if (!gup_huge_pmd(pmd, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pud;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+			int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (unlikely(pud_large(pud))) {
+			if (!gup_huge_pud(pud, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int nr = 0;
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, len)))
+		goto slow_irqon;
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables and pages from being freed on x86.
+	 *
+	 * So long as we atomically load page table pointers versus teardown
+	 * (which we do on x86, with the above PAE exception), we can follow the
+	 * address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			goto slow;
+		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			goto slow;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 0b3d567e686..8f307d914c2 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -124,7 +124,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 1;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -133,9 +134,14 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	pgd = pgd_offset(mm, addr);
 	pud = pud_alloc(mm, pgd, addr);
 	if (pud) {
-		if (pud_none(*pud))
-			huge_pmd_share(mm, addr, pud);
-		pte = (pte_t *) pmd_alloc(mm, pud, addr);
+		if (sz == PUD_SIZE) {
+			pte = (pte_t *)pud;
+		} else {
+			BUG_ON(sz != PMD_SIZE);
+			if (pud_none(*pud))
+				huge_pmd_share(mm, addr, pud);
+			pte = (pte_t *) pmd_alloc(mm, pud, addr);
+		}
 	}
 	BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
 
@@ -151,8 +157,11 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	pgd = pgd_offset(mm, addr);
 	if (pgd_present(*pgd)) {
 		pud = pud_offset(pgd, addr);
-		if (pud_present(*pud))
+		if (pud_present(*pud)) {
+			if (pud_large(*pud))
+				return (pte_t *)pud;
 			pmd = pmd_offset(pud, addr);
+		}
 	}
 	return (pte_t *) pmd;
 }
@@ -188,6 +197,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -208,6 +222,11 @@ int pmd_huge(pmd_t pmd)
 	return !!(pmd_val(pmd) & _PAGE_PSE);
 }
 
+int pud_huge(pud_t pud)
+{
+	return !!(pud_val(pud) & _PAGE_PSE);
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -216,9 +235,22 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 
 	page = pte_page(*(pte_t *)pmd);
 	if (page)
-		page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT);
+		page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
+	return page;
+}
+
+struct page *
+follow_huge_pud(struct mm_struct *mm, unsigned long address,
+		pud_t *pud, int write)
+{
+	struct page *page;
+
+	page = pte_page(*(pte_t *)pud);
+	if (page)
+		page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
 	return page;
 }
+
 #endif
 
 /* x86_64 also uses this file */
@@ -228,6 +260,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 		unsigned long addr, unsigned long len,
 		unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
@@ -240,7 +273,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 	}
 
 full_search:
-	addr = ALIGN(start_addr, HPAGE_SIZE);
+	addr = ALIGN(start_addr, huge_page_size(h));
 
 	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
 		/* At this point:  (!vma || addr < vma->vm_end). */
@@ -262,7 +295,7 @@ full_search:
 		}
 		if (addr + mm->cached_hole_size < vma->vm_start)
 		        mm->cached_hole_size = vma->vm_start - addr;
-		addr = ALIGN(vma->vm_end, HPAGE_SIZE);
+		addr = ALIGN(vma->vm_end, huge_page_size(h));
 	}
 }
 
@@ -270,6 +303,7 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
 		unsigned long addr0, unsigned long len,
 		unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma, *prev_vma;
 	unsigned long base = mm->mmap_base, addr = addr0;
@@ -290,7 +324,7 @@ try_again:
 		goto fail;
 
 	/* either no address requested or cant fit in requested address hole */
-	addr = (mm->free_area_cache - len) & HPAGE_MASK;
+	addr = (mm->free_area_cache - len) & huge_page_mask(h);
 	do {
 		/*
 		 * Lookup failure means no vma is above this address,
@@ -321,7 +355,7 @@ try_again:
 		        largest_hole = vma->vm_start - addr;
 
 		/* try just below the current vma->vm_start */
-		addr = (vma->vm_start - len) & HPAGE_MASK;
+		addr = (vma->vm_start - len) & huge_page_mask(h);
 	} while (len <= vma->vm_start);
 
 fail:
@@ -359,22 +393,23 @@ unsigned long
 hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		unsigned long len, unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 
-	if (len & ~HPAGE_MASK)
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
 	if (len > TASK_SIZE)
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
 
 	if (addr) {
-		addr = ALIGN(addr, HPAGE_SIZE);
+		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
 		    (!vma || addr + len <= vma->vm_start))
@@ -390,3 +425,20 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 
 #endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
 
+#ifdef CONFIG_X86_64
+static __init int setup_hugepagesz(char *opt)
+{
+	unsigned long ps = memparse(opt, &opt);
+	if (ps == PMD_SIZE) {
+		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+	} else if (ps == PUD_SIZE && cpu_has_gbpages) {
+		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+	} else {
+		printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n",
+			ps >> 20);
+		return 0;
+	}
+	return 1;
+}
+__setup("hugepagesz=", setup_hugepagesz);
+#endif
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 9689a5138e6..60ec1d08ff2 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -458,11 +458,7 @@ static void __init pagetable_init(void)
 {
 	pgd_t *pgd_base = swapper_pg_dir;
 
-	paravirt_pagetable_setup_start(pgd_base);
-
 	permanent_kmaps_init(pgd_base);
-
-	paravirt_pagetable_setup_done(pgd_base);
 }
 
 #ifdef CONFIG_ACPI_SLEEP
@@ -844,6 +840,9 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 		reserve_early(table_start << PAGE_SHIFT,
 				 table_end << PAGE_SHIFT, "PGTABLE");
 
+	if (!after_init_bootmem)
+		early_memtest(start, end);
+
 	return end >> PAGE_SHIFT;
 }
 
@@ -868,8 +867,6 @@ void __init paging_init(void)
 	 */
 	sparse_init();
 	zone_sizes_init();
-
-	paravirt_post_allocator_init();
 }
 
 /*
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 306049edd55..d3746efb060 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -60,7 +60,7 @@ static unsigned long dma_reserve __initdata;
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-int direct_gbpages __meminitdata
+int direct_gbpages
 #ifdef CONFIG_DIRECT_GBPAGES
 				= 1
 #endif
@@ -86,46 +86,13 @@ early_param("gbpages", parse_direct_gbpages_on);
  * around without checking the pgd every time.
  */
 
-void show_mem(void)
-{
-	long i, total = 0, reserved = 0;
-	long shared = 0, cached = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			/*
-			 * This loop can take a while with 256 GB and
-			 * 4k pages so defer the NMI watchdog:
-			 */
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-	}
-	printk(KERN_INFO "%lu pages of RAM\n",		total);
-	printk(KERN_INFO "%lu reserved pages\n",	reserved);
-	printk(KERN_INFO "%lu pages shared\n",		shared);
-	printk(KERN_INFO "%lu pages swap cached\n",	cached);
-}
-
 int after_bootmem;
 
-static __init void *spp_getpage(void)
+/*
+ * NOTE: This function is marked __ref because it calls __init function
+ * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
+ */
+static __ref void *spp_getpage(void)
 {
 	void *ptr;
 
@@ -274,7 +241,7 @@ static unsigned long __initdata table_start;
 static unsigned long __meminitdata table_end;
 static unsigned long __meminitdata table_top;
 
-static __meminit void *alloc_low_page(unsigned long *phys)
+static __ref void *alloc_low_page(unsigned long *phys)
 {
 	unsigned long pfn = table_end++;
 	void *adr;
@@ -295,7 +262,7 @@ static __meminit void *alloc_low_page(unsigned long *phys)
 	return adr;
 }
 
-static __meminit void unmap_low_page(void *adr)
+static __ref void unmap_low_page(void *adr)
 {
 	if (after_bootmem)
 		return;
@@ -351,6 +318,7 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 {
 	unsigned long pages = 0;
 	unsigned long last_map_addr = end;
+	unsigned long start = address;
 
 	int i = pmd_index(address);
 
@@ -368,16 +336,24 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		}
 
 		if (pmd_val(*pmd)) {
-			if (!pmd_large(*pmd))
+			if (!pmd_large(*pmd)) {
+				spin_lock(&init_mm.page_table_lock);
 				last_map_addr = phys_pte_update(pmd, address,
-								 end);
+								end);
+				spin_unlock(&init_mm.page_table_lock);
+			}
+			/* Count entries we're using from level2_ident_pgt */
+			if (start == 0)
+				pages++;
 			continue;
 		}
 
 		if (page_size_mask & (1<<PG_LEVEL_2M)) {
 			pages++;
+			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pmd,
 				pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (address & PMD_MASK) + PMD_SIZE;
 			continue;
 		}
@@ -386,7 +362,9 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		last_map_addr = phys_pte_init(pte, address, end);
 		unmap_low_page(pte);
 
+		spin_lock(&init_mm.page_table_lock);
 		pmd_populate_kernel(&init_mm, pmd, __va(pte_phys));
+		spin_unlock(&init_mm.page_table_lock);
 	}
 	update_page_count(PG_LEVEL_2M, pages);
 	return last_map_addr;
@@ -399,9 +377,7 @@ phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end,
 	pmd_t *pmd = pmd_offset(pud, 0);
 	unsigned long last_map_addr;
 
-	spin_lock(&init_mm.page_table_lock);
 	last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask);
-	spin_unlock(&init_mm.page_table_lock);
 	__flush_tlb_all();
 	return last_map_addr;
 }
@@ -437,20 +413,21 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
 
 		if (page_size_mask & (1<<PG_LEVEL_1G)) {
 			pages++;
+			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pud,
 				pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
 			continue;
 		}
 
 		pmd = alloc_low_page(&pmd_phys);
-
-		spin_lock(&init_mm.page_table_lock);
 		last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask);
 		unmap_low_page(pmd);
+
+		spin_lock(&init_mm.page_table_lock);
 		pud_populate(&init_mm, pud, __va(pmd_phys));
 		spin_unlock(&init_mm.page_table_lock);
-
 	}
 	__flush_tlb_all();
 	update_page_count(PG_LEVEL_1G, pages);
@@ -517,118 +494,6 @@ static void __init init_gbpages(void)
 		direct_gbpages = 0;
 }
 
-#ifdef CONFIG_MEMTEST
-
-static void __init memtest(unsigned long start_phys, unsigned long size,
-				 unsigned pattern)
-{
-	unsigned long i;
-	unsigned long *start;
-	unsigned long start_bad;
-	unsigned long last_bad;
-	unsigned long val;
-	unsigned long start_phys_aligned;
-	unsigned long count;
-	unsigned long incr;
-
-	switch (pattern) {
-	case 0:
-		val = 0UL;
-		break;
-	case 1:
-		val = -1UL;
-		break;
-	case 2:
-		val = 0x5555555555555555UL;
-		break;
-	case 3:
-		val = 0xaaaaaaaaaaaaaaaaUL;
-		break;
-	default:
-		return;
-	}
-
-	incr = sizeof(unsigned long);
-	start_phys_aligned = ALIGN(start_phys, incr);
-	count = (size - (start_phys_aligned - start_phys))/incr;
-	start = __va(start_phys_aligned);
-	start_bad = 0;
-	last_bad = 0;
-
-	for (i = 0; i < count; i++)
-		start[i] = val;
-	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
-		if (*start != val) {
-			if (start_phys_aligned == last_bad + incr) {
-				last_bad += incr;
-			} else {
-				if (start_bad) {
-					printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
-						val, start_bad, last_bad + incr);
-					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
-				}
-				start_bad = last_bad = start_phys_aligned;
-			}
-		}
-	}
-	if (start_bad) {
-		printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
-			val, start_bad, last_bad + incr);
-		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
-	}
-
-}
-
-/* default is disabled */
-static int memtest_pattern __initdata;
-
-static int __init parse_memtest(char *arg)
-{
-	if (arg)
-		memtest_pattern = simple_strtoul(arg, NULL, 0);
-	return 0;
-}
-
-early_param("memtest", parse_memtest);
-
-static void __init early_memtest(unsigned long start, unsigned long end)
-{
-	u64 t_start, t_size;
-	unsigned pattern;
-
-	if (!memtest_pattern)
-		return;
-
-	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
-	for (pattern = 0; pattern < memtest_pattern; pattern++) {
-		t_start = start;
-		t_size = 0;
-		while (t_start < end) {
-			t_start = find_e820_area_size(t_start, &t_size, 1);
-
-			/* done ? */
-			if (t_start >= end)
-				break;
-			if (t_start + t_size > end)
-				t_size = end - t_start;
-
-			printk(KERN_CONT "\n  %016llx - %016llx pattern %d",
-				(unsigned long long)t_start,
-				(unsigned long long)t_start + t_size, pattern);
-
-			memtest(t_start, t_size, pattern);
-
-			t_start += t_size;
-		}
-	}
-	printk(KERN_CONT "\n");
-}
-#else
-static void __init early_memtest(unsigned long start, unsigned long end)
-{
-}
-#endif
-
 static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 						unsigned long end,
 						unsigned long page_size_mask)
@@ -654,16 +519,14 @@ static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 			continue;
 		}
 
-		if (after_bootmem)
-			pud = pud_offset(pgd, start & PGDIR_MASK);
-		else
-			pud = alloc_low_page(&pud_phys);
-
+		pud = alloc_low_page(&pud_phys);
 		last_map_addr = phys_pud_init(pud, __pa(start), __pa(next),
 						 page_size_mask);
 		unmap_low_page(pud);
-		pgd_populate(&init_mm, pgd_offset_k(start),
-			     __va(pud_phys));
+
+		spin_lock(&init_mm.page_table_lock);
+		pgd_populate(&init_mm, pgd, __va(pud_phys));
+		spin_unlock(&init_mm.page_table_lock);
 	}
 
 	return last_map_addr;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 24c1d3c3018..d4b6e6a29ae 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -170,7 +170,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	phys_addr &= PAGE_MASK;
 	size = PAGE_ALIGN(last_addr+1) - phys_addr;
 
-	retval = reserve_memtype(phys_addr, phys_addr + size,
+	retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
 						prot_val, &new_prot_val);
 	if (retval) {
 		pr_debug("Warning: reserve_memtype returned %d\n", retval);
@@ -330,6 +330,14 @@ static void __iomem *ioremap_default(resource_size_t phys_addr,
 	return (void __iomem *)ret;
 }
 
+void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
+				unsigned long prot_val)
+{
+	return __ioremap_caller(phys_addr, size, (prot_val & _PAGE_CACHE_MASK),
+				__builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_prot);
+
 /**
  * iounmap - Free a IO remapping
  * @addr: virtual address from ioremap_*
@@ -545,13 +553,11 @@ static int __init check_early_ioremap_leak(void)
 {
 	if (!early_ioremap_nested)
 		return 0;
-
-	printk(KERN_WARNING
+	WARN(1, KERN_WARNING
 	       "Debug warning: early ioremap leak of %d areas detected.\n",
-	       early_ioremap_nested);
+		early_ioremap_nested);
 	printk(KERN_WARNING
-	       "please boot with early_ioremap_debug and report the dmesg.\n");
-	WARN_ON(1);
+		"please boot with early_ioremap_debug and report the dmesg.\n");
 
 	return 1;
 }
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
new file mode 100644
index 00000000000..672e17f8262
--- /dev/null
+++ b/arch/x86/mm/memtest.c
@@ -0,0 +1,123 @@
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/pfn.h>
+
+#include <asm/e820.h>
+
+static void __init memtest(unsigned long start_phys, unsigned long size,
+				 unsigned pattern)
+{
+	unsigned long i;
+	unsigned long *start;
+	unsigned long start_bad;
+	unsigned long last_bad;
+	unsigned long val;
+	unsigned long start_phys_aligned;
+	unsigned long count;
+	unsigned long incr;
+
+	switch (pattern) {
+	case 0:
+		val = 0UL;
+		break;
+	case 1:
+		val = -1UL;
+		break;
+	case 2:
+#ifdef CONFIG_X86_64
+		val = 0x5555555555555555UL;
+#else
+		val = 0x55555555UL;
+#endif
+		break;
+	case 3:
+#ifdef CONFIG_X86_64
+		val = 0xaaaaaaaaaaaaaaaaUL;
+#else
+		val = 0xaaaaaaaaUL;
+#endif
+		break;
+	default:
+		return;
+	}
+
+	incr = sizeof(unsigned long);
+	start_phys_aligned = ALIGN(start_phys, incr);
+	count = (size - (start_phys_aligned - start_phys))/incr;
+	start = __va(start_phys_aligned);
+	start_bad = 0;
+	last_bad = 0;
+
+	for (i = 0; i < count; i++)
+		start[i] = val;
+	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
+		if (*start != val) {
+			if (start_phys_aligned == last_bad + incr) {
+				last_bad += incr;
+			} else {
+				if (start_bad) {
+					printk(KERN_CONT "\n  %010lx bad mem addr %010lx - %010lx reserved",
+						val, start_bad, last_bad + incr);
+					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+				}
+				start_bad = last_bad = start_phys_aligned;
+			}
+		}
+	}
+	if (start_bad) {
+		printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
+			val, start_bad, last_bad + incr);
+		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+	}
+
+}
+
+/* default is disabled */
+static int memtest_pattern __initdata;
+
+static int __init parse_memtest(char *arg)
+{
+	if (arg)
+		memtest_pattern = simple_strtoul(arg, NULL, 0);
+	return 0;
+}
+
+early_param("memtest", parse_memtest);
+
+void __init early_memtest(unsigned long start, unsigned long end)
+{
+	u64 t_start, t_size;
+	unsigned pattern;
+
+	if (!memtest_pattern)
+		return;
+
+	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
+	for (pattern = 0; pattern < memtest_pattern; pattern++) {
+		t_start = start;
+		t_size = 0;
+		while (t_start < end) {
+			t_start = find_e820_area_size(t_start, &t_size, 1);
+
+			/* done ? */
+			if (t_start >= end)
+				break;
+			if (t_start + t_size > end)
+				t_size = end - t_start;
+
+			printk(KERN_CONT "\n  %010llx - %010llx pattern %d",
+				(unsigned long long)t_start,
+				(unsigned long long)t_start + t_size, pattern);
+
+			memtest(t_start, t_size, pattern);
+
+			t_start += t_size;
+		}
+	}
+	printk(KERN_CONT "\n");
+}
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index e7397e108be..635b50e8558 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -430,7 +430,9 @@ static void enter_uniprocessor(void)
 						"may miss events.\n");
 }
 
-static void leave_uniprocessor(void)
+/* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
+   but this whole function is ifdefed CONFIG_HOTPLUG_CPU */
+static void __ref leave_uniprocessor(void)
 {
 	int cpu;
 	int err;
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index b432d578177..a4dd793d600 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -20,15 +20,9 @@
 #include <asm/acpi.h>
 #include <asm/k8.h>
 
-#ifndef Dprintk
-#define Dprintk(x...)
-#endif
-
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
-
 struct memnode memnode;
 
 s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
@@ -202,7 +196,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 		nodedata_phys + pgdat_size - 1);
 
 	memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
-	NODE_DATA(nodeid)->bdata = &plat_node_bdata[nodeid];
+	NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid];
 	NODE_DATA(nodeid)->node_start_pfn = start_pfn;
 	NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
 
diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c
index 0dcd42eb94e..d4aa503caaa 100644
--- a/arch/x86/mm/pageattr-test.c
+++ b/arch/x86/mm/pageattr-test.c
@@ -221,8 +221,7 @@ static int pageattr_test(void)
 	failed += print_split(&sc);
 
 	if (failed) {
-		printk(KERN_ERR "NOT PASSED. Please report.\n");
-		WARN_ON(1);
+		WARN(1, KERN_ERR "NOT PASSED. Please report.\n");
 		return -EINVAL;
 	} else {
 		if (print)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 65c6e46bf05..43e2f8483e4 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -55,13 +55,19 @@ static void split_page_count(int level)
 
 int arch_report_meminfo(char *page)
 {
-	int n = sprintf(page, "DirectMap4k:  %8lu\n"
-			"DirectMap2M:  %8lu\n",
-			direct_pages_count[PG_LEVEL_4K],
-			direct_pages_count[PG_LEVEL_2M]);
+	int n = sprintf(page, "DirectMap4k:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_4K] << 2);
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+	n += sprintf(page + n, "DirectMap2M:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_2M] << 11);
+#else
+	n += sprintf(page + n, "DirectMap4M:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_2M] << 12);
+#endif
 #ifdef CONFIG_X86_64
-	n += sprintf(page + n, "DirectMap1G:  %8lu\n",
-		     direct_pages_count[PG_LEVEL_1G]);
+	if (direct_gbpages)
+		n += sprintf(page + n, "DirectMap1G:  %8lu kB\n",
+			direct_pages_count[PG_LEVEL_1G] << 20);
 #endif
 	return n;
 }
@@ -592,10 +598,9 @@ repeat:
 	if (!pte_val(old_pte)) {
 		if (!primary)
 			return 0;
-		printk(KERN_WARNING "CPA: called for zero pte. "
+		WARN(1, KERN_WARNING "CPA: called for zero pte. "
 		       "vaddr = %lx cpa->vaddr = %lx\n", address,
 		       cpa->vaddr);
-		WARN_ON(1);
 		return -EINVAL;
 	}
 
@@ -844,7 +849,7 @@ int set_memory_uc(unsigned long addr, int numpages)
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
-	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
 			    _PAGE_CACHE_UC_MINUS, NULL))
 		return -EINVAL;
 
@@ -863,7 +868,7 @@ int set_memory_wc(unsigned long addr, int numpages)
 	if (!pat_enabled)
 		return set_memory_uc(addr, numpages);
 
-	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
 		_PAGE_CACHE_WC, NULL))
 		return -EINVAL;
 
@@ -879,7 +884,7 @@ int _set_memory_wb(unsigned long addr, int numpages)
 
 int set_memory_wb(unsigned long addr, int numpages)
 {
-	free_memtype(addr, addr + numpages * PAGE_SIZE);
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
 
 	return _set_memory_wb(addr, numpages);
 }
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index d4585077977..2a50e0fa64a 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -12,6 +12,8 @@
 #include <linux/gfp.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 #include <asm/msr.h>
 #include <asm/tlbflush.h>
@@ -205,6 +207,9 @@ static int chk_conflict(struct memtype *new, struct memtype *entry,
 	return -EBUSY;
 }
 
+static struct memtype *cached_entry;
+static u64 cached_start;
+
 /*
  * req_type typically has one of the:
  * - _PAGE_CACHE_WB
@@ -278,11 +283,17 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
+	if (cached_entry && start >= cached_start)
+		entry = cached_entry;
+	else
+		entry = list_entry(&memtype_list, struct memtype, nd);
+
 	/* Search for existing mapping that overlaps the current range */
 	where = NULL;
-	list_for_each_entry(entry, &memtype_list, nd) {
+	list_for_each_entry_continue(entry, &memtype_list, nd) {
 		if (end <= entry->start) {
 			where = entry->nd.prev;
+			cached_entry = list_entry(where, struct memtype, nd);
 			break;
 		} else if (start <= entry->start) { /* end > entry->start */
 			err = chk_conflict(new, entry, new_type);
@@ -290,6 +301,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
 				where = entry->nd.prev;
+				cached_entry = list_entry(where,
+							struct memtype, nd);
 			}
 			break;
 		} else if (start < entry->end) { /* start > entry->start */
@@ -297,7 +310,20 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 			if (!err) {
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
-				where = &entry->nd;
+				cached_entry = list_entry(entry->nd.prev,
+							struct memtype, nd);
+
+				/*
+				 * Move to right position in the linked
+				 * list to add this new entry
+				 */
+				list_for_each_entry_continue(entry,
+							&memtype_list, nd) {
+					if (start <= entry->start) {
+						where = entry->nd.prev;
+						break;
+					}
+				}
 			}
 			break;
 		}
@@ -312,6 +338,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return err;
 	}
 
+	cached_start = start;
+
 	if (where)
 		list_add(&new->nd, where);
 	else
@@ -341,6 +369,9 @@ int free_memtype(u64 start, u64 end)
 	spin_lock(&memtype_lock);
 	list_for_each_entry(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
+			if (cached_entry == entry || cached_start == start)
+				cached_entry = NULL;
+
 			list_del(&entry->nd);
 			kfree(entry);
 			err = 0;
@@ -359,22 +390,14 @@ int free_memtype(u64 start, u64 end)
 }
 
 
-/*
- * /dev/mem mmap interface. The memtype used for mapping varies:
- * - Use UC for mappings with O_SYNC flag
- * - Without O_SYNC flag, if there is any conflict in reserve_memtype,
- *   inherit the memtype from existing mapping.
- * - Else use UC_MINUS memtype (for backward compatibility with existing
- *   X drivers.
- */
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t vma_prot)
 {
 	return vma_prot;
 }
 
-#ifdef CONFIG_NONPROMISC_DEVMEM
-/* This check is done in drivers/char/mem.c in case of NONPROMISC_DEVMEM*/
+#ifdef CONFIG_STRICT_DEVMEM
+/* This check is done in drivers/char/mem.c in case of STRICT_DEVMEM*/
 static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 {
 	return 1;
@@ -398,20 +421,20 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 	}
 	return 1;
 }
-#endif /* CONFIG_NONPROMISC_DEVMEM */
+#endif /* CONFIG_STRICT_DEVMEM */
 
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
 	u64 offset = ((u64) pfn) << PAGE_SHIFT;
-	unsigned long flags = _PAGE_CACHE_UC_MINUS;
+	unsigned long flags = -1;
 	int retval;
 
 	if (!range_is_allowed(pfn, size))
 		return 0;
 
 	if (file->f_flags & O_SYNC) {
-		flags = _PAGE_CACHE_UC;
+		flags = _PAGE_CACHE_UC_MINUS;
 	}
 
 #ifdef CONFIG_X86_32
@@ -434,13 +457,14 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 #endif
 
 	/*
-	 * With O_SYNC, we can only take UC mapping. Fail if we cannot.
+	 * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
+	 *
 	 * Without O_SYNC, we want to get
 	 * - WB for WB-able memory and no other conflicting mappings
 	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
 	 * - Inherit from confliting mappings otherwise
 	 */
-	if (flags != _PAGE_CACHE_UC_MINUS) {
+	if (flags != -1) {
 		retval = reserve_memtype(offset, offset + size, flags, NULL);
 	} else {
 		retval = reserve_memtype(offset, offset + size, -1, &flags);
@@ -489,3 +513,89 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
 
 	free_memtype(addr, addr + size);
 }
+
+#if defined(CONFIG_DEBUG_FS)
+
+/* get Nth element of the linked list */
+static struct memtype *memtype_get_idx(loff_t pos)
+{
+	struct memtype *list_node, *print_entry;
+	int i = 1;
+
+	print_entry  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	if (!print_entry)
+		return NULL;
+
+	spin_lock(&memtype_lock);
+	list_for_each_entry(list_node, &memtype_list, nd) {
+		if (pos == i) {
+			*print_entry = *list_node;
+			spin_unlock(&memtype_lock);
+			return print_entry;
+		}
+		++i;
+	}
+	spin_unlock(&memtype_lock);
+	kfree(print_entry);
+	return NULL;
+}
+
+static void *memtype_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	if (*pos == 0) {
+		++*pos;
+		seq_printf(seq, "PAT memtype list:\n");
+	}
+
+	return memtype_get_idx(*pos);
+}
+
+static void *memtype_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	++*pos;
+	return memtype_get_idx(*pos);
+}
+
+static void memtype_seq_stop(struct seq_file *seq, void *v)
+{
+}
+
+static int memtype_seq_show(struct seq_file *seq, void *v)
+{
+	struct memtype *print_entry = (struct memtype *)v;
+
+	seq_printf(seq, "%s @ 0x%Lx-0x%Lx\n", cattr_name(print_entry->type),
+			print_entry->start, print_entry->end);
+	kfree(print_entry);
+	return 0;
+}
+
+static struct seq_operations memtype_seq_ops = {
+	.start = memtype_seq_start,
+	.next  = memtype_seq_next,
+	.stop  = memtype_seq_stop,
+	.show  = memtype_seq_show,
+};
+
+static int memtype_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &memtype_seq_ops);
+}
+
+static const struct file_operations memtype_fops = {
+	.open    = memtype_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release,
+};
+
+static int __init pat_memtype_list_init(void)
+{
+	debugfs_create_file("pat_memtype_list", S_IRUSR, arch_debugfs_dir,
+				NULL, &memtype_fops);
+	return 0;
+}
+
+late_initcall(pat_memtype_list_init);
+
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 557b2abceef..d50302774fe 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -207,6 +207,9 @@ static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[])
 	unsigned long addr;
 	int i;
 
+	if (PREALLOCATED_PMDS == 0) /* Work around gcc-3.4.x bug */
+		return;
+
 	pud = pud_offset(pgd, 0);
 
  	for (addr = i = 0; i < PREALLOCATED_PMDS;
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index b4becbf8c57..cab0abbd1eb 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -20,53 +20,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-	unsigned long flags;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-					global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-					global_page_state(NR_PAGETABLE));
-}
-
 /*
  * Associate a virtual page frame with a given physical page frame 
  * and protection flags for that frame.
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 1eb2973a301..16ae70fc57e 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -178,7 +178,7 @@ void acpi_numa_arch_fixup(void)
  * start of the node, and that the current "end" address is after
  * the previous one.
  */
-static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
+static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
 {
 	/*
 	 * Only add present memory as told by the e820.
@@ -189,10 +189,10 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c
 	if (memory_chunk->start_pfn >= max_pfn) {
 		printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
 			memory_chunk->start_pfn, memory_chunk->end_pfn);
-		return;
+		return -1;
 	}
 	if (memory_chunk->nid != nid)
-		return;
+		return -1;
 
 	if (!node_has_online_mem(nid))
 		node_start_pfn[nid] = memory_chunk->start_pfn;
@@ -202,6 +202,8 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c
 
 	if (node_end_pfn[nid] < memory_chunk->end_pfn)
 		node_end_pfn[nid] = memory_chunk->end_pfn;
+
+	return 0;
 }
 
 int __init get_memcfg_from_srat(void)
@@ -259,7 +261,9 @@ int __init get_memcfg_from_srat(void)
 		printk(KERN_DEBUG
 			"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
 		       j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
-		node_read_chunk(chunk->nid, chunk);
+		if (node_read_chunk(chunk->nid, chunk))
+			continue;
+
 		e820_register_active_regions(chunk->nid, chunk->start_pfn,
 					     min(chunk->end_pfn, max_pfn));
 	}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 7f3329b55d2..8a5f1614a3d 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
 #include <linux/kdebug.h>
+#include <linux/cpu.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -28,23 +29,48 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
 static int nmi_start(void);
 static void nmi_stop(void);
+static void nmi_cpu_start(void *dummy);
+static void nmi_cpu_stop(void *dummy);
 
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
+#ifdef CONFIG_SMP
+static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
+				 void *data)
+{
+	int cpu = (unsigned long)data;
+	switch (action) {
+	case CPU_DOWN_FAILED:
+	case CPU_ONLINE:
+		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+		break;
+	case CPU_DOWN_PREPARE:
+		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block oprofile_cpu_nb = {
+	.notifier_call = oprofile_cpu_notifier
+};
+#endif
+
 #ifdef CONFIG_PM
 
 static int nmi_suspend(struct sys_device *dev, pm_message_t state)
 {
+	/* Only one CPU left, just stop that one */
 	if (nmi_enabled == 1)
-		nmi_stop();
+		nmi_cpu_stop(NULL);
 	return 0;
 }
 
 static int nmi_resume(struct sys_device *dev)
 {
 	if (nmi_enabled == 1)
-		nmi_start();
+		nmi_cpu_start(NULL);
 	return 0;
 }
 
@@ -269,10 +295,12 @@ static void nmi_cpu_shutdown(void *dummy)
 
 static void nmi_shutdown(void)
 {
-	struct op_msrs *msrs = &get_cpu_var(cpu_msrs);
+	struct op_msrs *msrs;
+
 	nmi_enabled = 0;
 	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
 	unregister_die_notifier(&profile_exceptions_nb);
+	msrs = &get_cpu_var(cpu_msrs);
 	model->shutdown(msrs);
 	free_msrs();
 	put_cpu_var(cpu_msrs);
@@ -369,20 +397,34 @@ static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (cpu_model == 14)
+	switch (cpu_model) {
+	case 0 ... 2:
+		*cpu_type = "i386/ppro";
+		break;
+	case 3 ... 5:
+		*cpu_type = "i386/pii";
+		break;
+	case 6 ... 8:
+		*cpu_type = "i386/piii";
+		break;
+	case 9:
+		*cpu_type = "i386/p6_mobile";
+		break;
+	case 10 ... 13:
+		*cpu_type = "i386/p6";
+		break;
+	case 14:
 		*cpu_type = "i386/core";
-	else if (cpu_model == 15 || cpu_model == 23)
+		break;
+	case 15: case 23:
 		*cpu_type = "i386/core_2";
-	else if (cpu_model > 0xd)
+		break;
+	case 26:
+		*cpu_type = "i386/core_2";
+		break;
+	default:
+		/* Unknown */
 		return 0;
-	else if (cpu_model == 9) {
-		*cpu_type = "i386/p6_mobile";
-	} else if (cpu_model > 5) {
-		*cpu_type = "i386/piii";
-	} else if (cpu_model > 2) {
-		*cpu_type = "i386/pii";
-	} else {
-		*cpu_type = "i386/ppro";
 	}
 
 	model = &op_ppro_spec;
@@ -449,6 +491,9 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	}
 
 	init_sysfs();
+#ifdef CONFIG_SMP
+	register_cpu_notifier(&oprofile_cpu_nb);
+#endif
 	using_nmi = 1;
 	ops->create_files = nmi_create_files;
 	ops->setup = nmi_setup;
@@ -462,6 +507,10 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 
 void op_nmi_exit(void)
 {
-	if (using_nmi)
+	if (using_nmi) {
 		exit_sysfs();
+#ifdef CONFIG_SMP
+		unregister_cpu_notifier(&oprofile_cpu_nb);
+#endif
+	}
 }
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index e515e8db842..d49202e740e 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -5,13 +5,13 @@ obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig_$(BITS).o direct.o mmconfig-shared.o
 obj-$(CONFIG_PCI_DIRECT)	+= direct.o
 obj-$(CONFIG_PCI_OLPC)		+= olpc.o
 
-pci-y				:= fixup.o
-pci-$(CONFIG_ACPI)		+= acpi.o
-pci-y				+= legacy.o irq.o
+obj-y				+= fixup.o
+obj-$(CONFIG_ACPI)		+= acpi.o
+obj-y				+= legacy.o irq.o
 
-pci-$(CONFIG_X86_VISWS)		+= visws.o
+obj-$(CONFIG_X86_VISWS)		+= visws.o
 
-pci-$(CONFIG_X86_NUMAQ)		+= numa.o
+obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
-obj-y				+= $(pci-y) common.o early.o
+obj-y				+= common.o early.o
 obj-y				+= amd_bus.o
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index dbf53236971..6a0fca78c36 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -1,6 +1,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/topology.h>
+#include <linux/cpu.h>
 #include "pci.h"
 
 #ifdef CONFIG_X86_64
@@ -555,15 +556,17 @@ static int __init early_fill_mp_bus_info(void)
 	return 0;
 }
 
-postcore_initcall(early_fill_mp_bus_info);
+#else  /* !CONFIG_X86_64 */
 
-#endif
+static int __init early_fill_mp_bus_info(void) { return 0; }
+
+#endif /* !CONFIG_X86_64 */
 
 /* common 32/64 bit code */
 
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
-static void enable_pci_io_ecs_per_cpu(void *unused)
+static void enable_pci_io_ecs(void *unused)
 {
 	u64 reg;
 	rdmsrl(MSR_AMD64_NB_CFG, reg);
@@ -573,14 +576,51 @@ static void enable_pci_io_ecs_per_cpu(void *unused)
 	}
 }
 
-static int __init enable_pci_io_ecs(void)
+static int __cpuinit amd_cpu_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
 {
+	int cpu = (long)hcpu;
+	switch(action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata amd_cpu_notifier = {
+	.notifier_call	= amd_cpu_notify,
+};
+
+static int __init pci_io_ecs_init(void)
+{
+	int cpu;
+
 	/* assume all cpus from fam10h have IO ECS */
         if (boot_cpu_data.x86 < 0x10)
 		return 0;
-	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
+
+	register_cpu_notifier(&amd_cpu_notifier);
+	for_each_online_cpu(cpu)
+		amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
+			       (void *)(long)cpu);
 	pci_probe |= PCI_HAS_IO_ECS;
+
+	return 0;
+}
+
+static int __init amd_postcore_init(void)
+{
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return 0;
+
+	early_fill_mp_bus_info();
+	pci_io_ecs_init();
+
 	return 0;
 }
 
-postcore_initcall(enable_pci_io_ecs);
+postcore_initcall(amd_postcore_init);
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index 858dbe3399f..86631ccbc25 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -7,15 +7,13 @@
 /* Direct PCI access. This is used for PCI accesses in early boot before
    the PCI subsystem works. */
 
-#define PDprintk(x...)
-
 u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
 {
 	u32 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inl(0xcfc);
 	if (v != 0xffffffff)
-		PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
+		pr_debug("%x reading 4 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
@@ -24,7 +22,7 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
 	u8 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inb(0xcfc + (offset&3));
-	PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
+	pr_debug("%x reading 1 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
@@ -33,28 +31,28 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
 	u16 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inw(0xcfc + (offset&2));
-	PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
+	pr_debug("%x reading 2 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
 void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
 				    u32 val)
 {
-	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	outl(val, 0xcfc);
 }
 
 void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
 {
-	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	outb(val, 0xcfc + (offset&3));
 }
 
 void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
 {
-	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	outw(val, 0xcfc + (offset&2));
 }
@@ -71,7 +69,7 @@ void early_dump_pci_device(u8 bus, u8 slot, u8 func)
 	int j;
 	u32 val;
 
-	printk("PCI: %02x:%02x:%02x", bus, slot, func);
+	printk(KERN_INFO "PCI: %02x:%02x:%02x", bus, slot, func);
 
 	for (i = 0; i < 256; i += 4) {
 		if (!(i & 0x0f))
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index ff3a6a33634..4bdaa590375 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 		pci_read_config_byte(d, reg++, &busno);
 		pci_read_config_byte(d, reg++, &suba);
 		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+			suba, subb);
 		if (busno)
 			pci_scan_bus_with_sysdata(busno);	/* Bus A */
 		if (suba < subb)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 2aafb67dc5f..8791fc55e71 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,10 +128,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				pr = pci_find_parent_resource(dev, r);
 				if (!r->start || !pr ||
 				    request_resource(pr, r) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate "
-						"resource region %d "
-						"of bridge %s\n",
-						idx, pci_name(dev));
+					dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/*
 					 * Something is wrong with the region.
 					 * Invalidate the resource to prevent
@@ -166,15 +163,13 @@ static void __init pcibios_allocate_resources(int pass)
 			else
 				disabled = !(command & PCI_COMMAND_MEMORY);
 			if (pass == disabled) {
-				DBG("PCI: Resource %08lx-%08lx "
-				    "(f=%lx, d=%d, p=%d)\n",
-				    r->start, r->end, r->flags, disabled, pass);
+				dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n",
+					(unsigned long long) r->start,
+					(unsigned long long) r->end,
+					r->flags, disabled, pass);
 				pr = pci_find_parent_resource(dev, r);
 				if (!pr || request_resource(pr, r) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate "
-						"resource region %d "
-						"of device %s\n",
-						idx, pci_name(dev));
+					dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;
@@ -187,8 +182,7 @@ static void __init pcibios_allocate_resources(int pass)
 				/* Turn the ROM off, leave the resource region,
 				 * but keep it unregistered. */
 				u32 reg;
-				DBG("PCI: Switching off ROM of %s\n",
-					pci_name(dev));
+				dev_dbg(&dev->dev, "disabling ROM\n");
 				r->flags &= ~IORESOURCE_ROM_ENABLE;
 				pci_read_config_dword(dev,
 						dev->rom_base_reg, &reg);
@@ -257,8 +251,7 @@ void pcibios_set_master(struct pci_dev *dev)
 		lat = pcibios_max_latency;
 	else
 		return;
-	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
-		pci_name(dev), lat);
+	dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
@@ -280,6 +273,7 @@ static void pci_track_mmap_page_range(struct vm_area_struct *vma)
 static struct vm_operations_struct pci_mmap_ops = {
 	.open  = pci_track_mmap_page_range,
 	.close = pci_unmap_page_range,
+	.access = generic_access_phys,
 };
 
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 6a06a2eb059..8e077185e18 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -436,7 +436,7 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
 	WARN_ON_ONCE(pirq >= 9);
 	if (pirq > 8) {
-		printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+		dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
 		return 0;
 	}
 	return read_config_nybble(router, 0x74, pirq-1);
@@ -446,7 +446,7 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 {
 	WARN_ON_ONCE(pirq >= 9);
 	if (pirq > 8) {
-		printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+		dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
 		return 0;
 	}
 	write_config_nybble(router, 0x74, pirq-1, irq);
@@ -492,15 +492,17 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 	irq = 0;
 	if (pirq <= 4)
 		irq = read_config_nybble(router, 0x56, pirq - 1);
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
-		dev->vendor, dev->device, pirq, irq);
+	dev_info(&dev->dev,
+		 "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+		 dev->vendor, dev->device, pirq, irq);
 	return irq;
 }
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
-		dev->vendor, dev->device, pirq, irq);
+	dev_info(&dev->dev,
+		 "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+		 dev->vendor, dev->device, pirq, irq);
 	if (pirq <= 4)
 		write_config_nybble(router, 0x56, pirq - 1, irq);
 	return 1;
@@ -588,6 +590,8 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	case PCI_DEVICE_ID_INTEL_ICH10_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_2:
 	case PCI_DEVICE_ID_INTEL_ICH10_3:
+	case PCI_DEVICE_ID_INTEL_PCH_0:
+	case PCI_DEVICE_ID_INTEL_PCH_1:
 		r->name = "PIIX/ICH";
 		r->get = pirq_piix_get;
 		r->set = pirq_piix_set;
@@ -730,7 +734,6 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
 	switch (device) {
 	case PCI_DEVICE_ID_AL_M1533:
 	case PCI_DEVICE_ID_AL_M1563:
-		printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
 		r->name = "ALI";
 		r->get = pirq_ali_get;
 		r->set = pirq_ali_set;
@@ -840,11 +843,9 @@ static void __init pirq_find_router(struct irq_router *r)
 			h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
 	}
-	printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
-		pirq_router.name,
-		pirq_router_dev->vendor,
-		pirq_router_dev->device,
-		pci_name(pirq_router_dev));
+	dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+		 pirq_router.name,
+		 pirq_router_dev->vendor, pirq_router_dev->device);
 
 	/* The device remains referenced for the kernel lifetime */
 }
@@ -877,7 +878,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	/* Find IRQ pin */
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 	if (!pin) {
-		DBG(KERN_DEBUG " -> no interrupt pin\n");
+		dev_dbg(&dev->dev, "no interrupt pin\n");
 		return 0;
 	}
 	pin = pin - 1;
@@ -887,20 +888,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	if (!pirq_table)
 		return 0;
 
-	DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
 	info = pirq_get_info(dev);
 	if (!info) {
-		DBG(" -> not found in routing table\n" KERN_DEBUG);
+		dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+			'A' + pin);
 		return 0;
 	}
 	pirq = info->irq[pin].link;
 	mask = info->irq[pin].bitmap;
 	if (!pirq) {
-		DBG(" -> not routed\n" KERN_DEBUG);
+		dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
 		return 0;
 	}
-	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask,
-		pirq_table->exclusive_irqs);
+	dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+		'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
 	mask &= pcibios_irq_mask;
 
 	/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -930,10 +931,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		if (pci_probe & PCI_USE_PIRQ_MASK)
 			newirq = 0;
 		else
-			printk("\n" KERN_WARNING
-				"PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n"
-				KERN_DEBUG, newirq,
-				pci_name(dev));
+			dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+				 "%#x; try pci=usepirqmask\n", newirq, mask);
 	}
 	if (!newirq && assign) {
 		for (i = 0; i < 16; i++) {
@@ -944,39 +943,35 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 				newirq = i;
 		}
 	}
-	DBG(" -> newirq=%d", newirq);
+	dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
 
 	/* Check if it is hardcoded */
 	if ((pirq & 0xf0) == 0xf0) {
 		irq = pirq & 0xf;
-		DBG(" -> hardcoded IRQ %d\n", irq);
-		msg = "Hardcoded";
+		msg = "hardcoded";
 	} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
 	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
-		DBG(" -> got IRQ %d\n", irq);
-		msg = "Found";
+		msg = "found";
 		eisa_set_level_irq(irq);
 	} else if (newirq && r->set &&
 		(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
-		DBG(" -> assigning IRQ %d", newirq);
 		if (r->set(pirq_router_dev, dev, pirq, newirq)) {
 			eisa_set_level_irq(newirq);
-			DBG(" ... OK\n");
-			msg = "Assigned";
+			msg = "assigned";
 			irq = newirq;
 		}
 	}
 
 	if (!irq) {
-		DBG(" ... failed\n");
 		if (newirq && mask == (1 << newirq)) {
-			msg = "Guessed";
+			msg = "guessed";
 			irq = newirq;
-		} else
+		} else {
+			dev_dbg(&dev->dev, "can't route interrupt\n");
 			return 0;
+		}
 	}
-	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq,
-		pci_name(dev));
+	dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
 
 	/* Update IRQ for all devices with the same pirq value */
 	while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -996,17 +991,17 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
 			((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-				printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
-				       pci_name(dev2), dev2->irq, irq);
+				dev_info(&dev2->dev, "IRQ routing conflict: "
+					 "have IRQ %d, want IRQ %d\n",
+					 dev2->irq, irq);
 #endif
 				continue;
 			}
 			dev2->irq = irq;
 			pirq_penalty[irq]++;
 			if (dev != dev2)
-				printk(KERN_INFO
-					"PCI: Sharing IRQ %d with %s\n",
-					irq, pci_name(dev2));
+				dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+					 irq, pci_name(dev2));
 		}
 	}
 	return 1;
@@ -1025,8 +1020,7 @@ static void __init pcibios_fixup_irqs(void)
 		 * already in use.
 		 */
 		if (dev->irq >= 16) {
-			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n",
-				pci_name(dev), dev->irq);
+			dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
 			dev->irq = 0;
 		}
 		/*
@@ -1070,12 +1064,12 @@ static void __init pcibios_fixup_irqs(void)
 					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 							PCI_SLOT(bridge->devfn), pin);
 					if (irq >= 0)
-						printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-							pci_name(bridge), 'A' + pin, irq);
+						dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
+							 pci_name(bridge),
+							 'A' + pin, irq);
 				}
 				if (irq >= 0) {
-					printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-						pci_name(dev), 'A' + pin, irq);
+					dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
 					dev->irq = irq;
 				}
 			}
@@ -1231,25 +1225,24 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn), pin);
 				if (irq >= 0)
-					printk(KERN_WARNING
-						"PCI: using PPB %s[%c] to get irq %d\n",
-						pci_name(bridge),
-						'A' + pin, irq);
+					dev_warn(&dev->dev, "using bridge %s "
+						 "INT %c to get IRQ %d\n",
+						 pci_name(bridge), 'A' + pin,
+						 irq);
 				dev = bridge;
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				printk(KERN_INFO
-					"PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-					pci_name(dev), 'A' + pin, irq);
+				dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+					 "INT %c -> IRQ %d\n", 'A' + pin, irq);
 				dev->irq = irq;
 				return 0;
 			} else
-				msg = " Probably buggy MP table.";
+				msg = "; probably buggy MP table";
 		} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
 			msg = "";
 		else
-			msg = " Please try using pci=biosirq.";
+			msg = "; please try using pci=biosirq";
 
 		/*
 		 * With IDE legacy devices the IRQ lookup failure is not
@@ -1259,9 +1252,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				!(dev->class & 0x5))
 			return 0;
 
-		printk(KERN_WARNING
-			"PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-			'A' + pin, pci_name(dev), msg);
+		dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+			 'A' + pin, msg);
 	}
 	return 0;
 }
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 132876cc6fc..b722dd481b3 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -14,7 +14,7 @@ static void __devinit pcibios_fixup_peer_bridges(void)
 	int n, devfn;
 	long node;
 
-	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 
@@ -57,14 +57,17 @@ static int __init pci_legacy_init(void)
 
 int __init pci_subsys_init(void)
 {
+#ifdef CONFIG_X86_NUMAQ
+	pci_numaq_init();
+#endif
 #ifdef CONFIG_ACPI
 	pci_acpi_init();
 #endif
+#ifdef CONFIG_X86_VISWS
+	pci_visws_init();
+#endif
 	pci_legacy_init();
 	pcibios_irq_init();
-#ifdef CONFIG_X86_NUMAQ
-	pci_numa_init();
-#endif
 	pcibios_init();
 
 	return 0;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 23faaa890ff..d9635764ce3 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -293,7 +293,7 @@ static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
 	return AE_OK;
 }
 
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 {
 	struct resource mcfg_res;
 
@@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end)
 	return mcfg_res.flags;
 }
 
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+		u64 addr, u64 size, int i,
+		typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+	u64 old_size = size;
+	int valid = 0;
+
+	while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+		size >>= 1;
+		if (size < (16UL<<20))
+			break;
+	}
+
+	if (size >= (16UL<<20) || size == old_size) {
+		printk(KERN_NOTICE
+		       "PCI: MCFG area at %Lx reserved in %s\n",
+			addr, with_e820?"E820":"ACPI motherboard resources");
+		valid = 1;
+
+		if (old_size != size) {
+			/* update end_bus_number */
+			cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+			printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+			       "segment %hu buses %u - %u\n",
+			       i, (unsigned long)cfg->address, cfg->pci_segment,
+			       (unsigned int)cfg->start_bus_number,
+			       (unsigned int)cfg->end_bus_number);
+		}
+	}
+
+	return valid;
+}
+
 static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;
@@ -324,21 +359,22 @@ static void __init pci_mmcfg_reject_broken(int early)
 
 	for (i = 0; i < pci_mmcfg_config_num; i++) {
 		int valid = 0;
-		u32 size = (cfg->end_bus_number + 1) << 20;
+		u64 addr, size;
+
 		cfg = &pci_mmcfg_config[i];
+		addr = cfg->start_bus_number;
+		addr <<= 20;
+		addr += cfg->address;
+		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+		size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
 		       "segment %hu buses %u - %u\n",
 		       i, (unsigned long)cfg->address, cfg->pci_segment,
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early &&
-		    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
-			printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
-			       "in ACPI motherboard resources\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (!early)
+			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
 			continue;
@@ -347,16 +383,11 @@ static void __init pci_mmcfg_reject_broken(int early)
 			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
+
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
-		if (raw_pci_ops && e820_all_mapped(cfg->address,
-						  cfg->address + size - 1,
-						  E820_RESERVED)) {
-			printk(KERN_NOTICE
-			       "PCI: MCFG area at %Lx reserved in E820\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (raw_pci_ops)
+			valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
 
 		if (!valid)
 			goto reject;
@@ -365,7 +396,7 @@ static void __init pci_mmcfg_reject_broken(int early)
 	return;
 
 reject:
-	printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+	printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
 	pci_mmcfg_arch_free();
 	kfree(pci_mmcfg_config);
 	pci_mmcfg_config = NULL;
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c
deleted file mode 100644
index 8b5ca196673..00000000000
--- a/arch/x86/pci/numa.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * numa.c - Low-level PCI access for NUMA-Q machines
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/nodemask.h>
-#include <mach_apic.h>
-#include <asm/mpspec.h>
-#include "pci.h"
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
-
-#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-
-/* Where the IO area was mapped on multiquad, always 0 otherwise */
-void *xquad_portio;
-EXPORT_SYMBOL(xquad_portio);
-
-#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
-
-#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
-
-static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
-{
-	unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
-	if (xquad_portio)
-		writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
-	else
-		outl(val, 0xCF8);
-}
-
-static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
-			     unsigned int devfn, int reg, int len, u32 *value)
-{
-	unsigned long flags;
-	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-	if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
-		return -EINVAL;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	write_cf8(bus, devfn, reg);
-
-	switch (len) {
-	case 1:
-		if (xquad_portio)
-			*value = readb(adr + (reg & 3));
-		else
-			*value = inb(0xCFC + (reg & 3));
-		break;
-	case 2:
-		if (xquad_portio)
-			*value = readw(adr + (reg & 2));
-		else
-			*value = inw(0xCFC + (reg & 2));
-		break;
-	case 4:
-		if (xquad_portio)
-			*value = readl(adr);
-		else
-			*value = inl(0xCFC);
-		break;
-	}
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
-			      unsigned int devfn, int reg, int len, u32 value)
-{
-	unsigned long flags;
-	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-	if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) 
-		return -EINVAL;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	write_cf8(bus, devfn, reg);
-
-	switch (len) {
-	case 1:
-		if (xquad_portio)
-			writeb(value, adr + (reg & 3));
-		else
-			outb((u8)value, 0xCFC + (reg & 3));
-		break;
-	case 2:
-		if (xquad_portio)
-			writew(value, adr + (reg & 2));
-		else
-			outw((u16)value, 0xCFC + (reg & 2));
-		break;
-	case 4:
-		if (xquad_portio)
-			writel(value, adr + reg);
-		else
-			outl((u32)value, 0xCFC);
-		break;
-	}
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-#undef PCI_CONF1_MQ_ADDRESS
-
-static struct pci_raw_ops pci_direct_conf1_mq = {
-	.read	= pci_conf1_mq_read,
-	.write	= pci_conf1_mq_write
-};
-
-
-static void __devinit pci_fixup_i450nx(struct pci_dev *d)
-{
-	/*
-	 * i450NX -- Find and scan all secondary buses on all PXB's.
-	 */
-	int pxb, reg;
-	u8 busno, suba, subb;
-	int quad = BUS2QUAD(d->bus->number);
-
-	printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
-	reg = 0xd0;
-	for(pxb=0; pxb<2; pxb++) {
-		pci_read_config_byte(d, reg++, &busno);
-		pci_read_config_byte(d, reg++, &suba);
-		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
-		if (busno) {
-			/* Bus A */
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
-		}
-		if (suba < subb) {
-			/* Bus B */
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
-		}
-	}
-	pcibios_last_bus = -1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
-
-int __init pci_numa_init(void)
-{
-	int quad;
-
-	if (!found_numaq)
-		return 0;
-
-	raw_pci_ops = &pci_direct_conf1_mq;
-
-	if (pcibios_scanned++)
-		return 0;
-
-	pci_root_bus = pcibios_scan_root(0);
-	if (pci_root_bus)
-		pci_bus_add_devices(pci_root_bus);
-	if (num_online_nodes() > 1)
-		for_each_online_node(quad) {
-			if (quad == 0)
-				continue;
-			printk("Scanning PCI bus %d for quad %d\n", 
-				QUADLOCAL2BUS(quad,0), quad);
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
-		}
-	return 0;
-}
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
new file mode 100644
index 00000000000..1177845d318
--- /dev/null
+++ b/arch/x86/pci/numaq_32.c
@@ -0,0 +1,179 @@
+/*
+ * numaq_32.c - Low-level PCI access for NUMA-Q machines
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/nodemask.h>
+#include <mach_apic.h>
+#include <asm/mpspec.h>
+#include "pci.h"
+
+#define XQUAD_PORTIO_BASE 0xfe400000
+#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
+
+#define BUS2QUAD(global) (mp_bus_id_to_node[global])
+
+#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
+
+#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
+
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+EXPORT_SYMBOL(xquad_portio);
+
+#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
+
+#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
+	(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
+
+static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
+{
+	unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
+	if (xquad_portio)
+		writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
+	else
+		outl(val, 0xCF8);
+}
+
+static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
+			     unsigned int devfn, int reg, int len, u32 *value)
+{
+	unsigned long flags;
+	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+
+	if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
+		return -EINVAL;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	write_cf8(bus, devfn, reg);
+
+	switch (len) {
+	case 1:
+		if (xquad_portio)
+			*value = readb(adr + (reg & 3));
+		else
+			*value = inb(0xCFC + (reg & 3));
+		break;
+	case 2:
+		if (xquad_portio)
+			*value = readw(adr + (reg & 2));
+		else
+			*value = inw(0xCFC + (reg & 2));
+		break;
+	case 4:
+		if (xquad_portio)
+			*value = readl(adr);
+		else
+			*value = inl(0xCFC);
+		break;
+	}
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
+			      unsigned int devfn, int reg, int len, u32 value)
+{
+	unsigned long flags;
+	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+
+	if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) 
+		return -EINVAL;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	write_cf8(bus, devfn, reg);
+
+	switch (len) {
+	case 1:
+		if (xquad_portio)
+			writeb(value, adr + (reg & 3));
+		else
+			outb((u8)value, 0xCFC + (reg & 3));
+		break;
+	case 2:
+		if (xquad_portio)
+			writew(value, adr + (reg & 2));
+		else
+			outw((u16)value, 0xCFC + (reg & 2));
+		break;
+	case 4:
+		if (xquad_portio)
+			writel(value, adr + reg);
+		else
+			outl((u32)value, 0xCFC);
+		break;
+	}
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+#undef PCI_CONF1_MQ_ADDRESS
+
+static struct pci_raw_ops pci_direct_conf1_mq = {
+	.read	= pci_conf1_mq_read,
+	.write	= pci_conf1_mq_write
+};
+
+
+static void __devinit pci_fixup_i450nx(struct pci_dev *d)
+{
+	/*
+	 * i450NX -- Find and scan all secondary buses on all PXB's.
+	 */
+	int pxb, reg;
+	u8 busno, suba, subb;
+	int quad = BUS2QUAD(d->bus->number);
+
+	dev_info(&d->dev, "searching for i450NX host bridges\n");
+	reg = 0xd0;
+	for(pxb=0; pxb<2; pxb++) {
+		pci_read_config_byte(d, reg++, &busno);
+		pci_read_config_byte(d, reg++, &suba);
+		pci_read_config_byte(d, reg++, &subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+			pxb, busno, suba, subb);
+		if (busno) {
+			/* Bus A */
+			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
+		}
+		if (suba < subb) {
+			/* Bus B */
+			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
+		}
+	}
+	pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
+
+int __init pci_numaq_init(void)
+{
+	int quad;
+
+	if (!found_numaq)
+		return 0;
+
+	raw_pci_ops = &pci_direct_conf1_mq;
+
+	if (pcibios_scanned++)
+		return 0;
+
+	pci_root_bus = pcibios_scan_root(0);
+	if (pci_root_bus)
+		pci_bus_add_devices(pci_root_bus);
+	if (num_online_nodes() > 1)
+		for_each_online_node(quad) {
+			if (quad == 0)
+				continue;
+			printk("Scanning PCI bus %d for quad %d\n", 
+				QUADLOCAL2BUS(quad,0), quad);
+			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
+		}
+	return 0;
+}
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index 3e25deb821a..15b9cf6be72 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -108,7 +108,8 @@ extern void __init dmi_check_skip_isa_align(void);
 /* some common used subsys_initcalls */
 extern int __init pci_acpi_init(void);
 extern int __init pcibios_irq_init(void);
-extern int __init pci_numa_init(void);
+extern int __init pci_visws_init(void);
+extern int __init pci_numaq_init(void);
 extern int __init pcibios_init(void);
 
 /* pci-mmconfig.c */
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index 1a7bed492bb..42f4cb19fac 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -86,8 +86,14 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
 
-static int __init pci_visws_init(void)
+int __init pci_visws_init(void)
 {
+	if (!is_visws_box())
+		return -1;
+
+	pcibios_enable_irq = &pci_visws_enable_irq;
+	pcibios_disable_irq = &pci_visws_disable_irq;
+
 	/* The VISWS supports configuration access type 1 only */
 	pci_probe = (pci_probe | PCI_PROBE_CONF1) &
 		    ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
@@ -105,18 +111,3 @@ static int __init pci_visws_init(void)
 	pcibios_resource_survey();
 	return 0;
 }
-
-static __init int pci_subsys_init(void)
-{
-	if (!is_visws_box())
-		return -1;
-
-	pcibios_enable_irq = &pci_visws_enable_irq;
-	pcibios_disable_irq = &pci_visws_disable_irq;
-
-	pci_visws_init();
-	pcibios_init();
-
-	return 0;
-}
-subsys_initcall(pci_subsys_init);
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
index 7dc5d5cf50a..d3e083dea72 100644
--- a/arch/x86/power/cpu_32.c
+++ b/arch/x86/power/cpu_32.c
@@ -45,7 +45,7 @@ static void __save_processor_state(struct saved_context *ctxt)
 	ctxt->cr0 = read_cr0();
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
-	ctxt->cr4 = read_cr4();
+	ctxt->cr4 = read_cr4_safe();
 }
 
 /* Needed by apm.c */
@@ -98,7 +98,9 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers
 	 */
-	write_cr4(ctxt->cr4);
+	/* cr4 was introduced in the Pentium CPU */
+	if (ctxt->cr4)
+		write_cr4(ctxt->cr4);
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
 	write_cr0(ctxt->cr0);
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index b95aa6cfe3c..4fc7e872c85 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -28,9 +28,9 @@ ENTRY(swsusp_arch_suspend)
 	ret
 
 ENTRY(restore_image)
-	movl	resume_pg_dir, %ecx
-	subl	$__PAGE_OFFSET, %ecx
-	movl	%ecx, %cr3
+	movl	resume_pg_dir, %eax
+	subl	$__PAGE_OFFSET, %eax
+	movl	%eax, %cr3
 
 	movl	restore_pblist, %edx
 	.p2align 4,,7
@@ -52,17 +52,21 @@ copy_loop:
 
 done:
 	/* go back to the original page tables */
-	movl	$swapper_pg_dir, %ecx
-	subl	$__PAGE_OFFSET, %ecx
-	movl	%ecx, %cr3
+	movl	$swapper_pg_dir, %eax
+	subl	$__PAGE_OFFSET, %eax
+	movl	%eax, %cr3
 	/* Flush TLB, including "global" things (vmalloc) */
-	movl	mmu_cr4_features, %eax
-	movl	%eax, %edx
+	movl	mmu_cr4_features, %ecx
+	jecxz	1f	# cr4 Pentium and higher, skip if zero
+	movl	%ecx, %edx
 	andl	$~(1<<7), %edx;  # PGE
 	movl	%edx, %cr4;  # turn off PGE
-	movl	%cr3, %ecx;  # flush TLB
-	movl	%ecx, %cr3
-	movl	%eax, %cr4;  # turn PGE back on
+1:
+	movl	%cr3, %eax;  # flush TLB
+	movl	%eax, %cr3
+	jecxz	1f	# cr4 Pentium and higher, skip if zero
+	movl	%ecx, %cr4;  # turn PGE back on
+1:
 
 	movl saved_context_esp, %esp
 	movl saved_context_ebp, %ebp
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index b7ad9f89d21..4d6ef0a336d 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -62,7 +62,7 @@ $(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
 # Build multiple 32-bit vDSO images to choose from at boot time.
 #
 obj-$(VDSO32-y)			+= vdso32-syms.lds
-vdso32.so-$(CONFIG_X86_32)	+= int80
+vdso32.so-$(VDSO32-y)		+= int80
 vdso32.so-$(CONFIG_COMPAT)	+= syscall
 vdso32.so-$(VDSO32-y)		+= sysenter
 
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 0bce5429a51..513f330c583 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -193,17 +193,12 @@ static __init void relocate_vdso(Elf32_Ehdr *ehdr)
 	}
 }
 
-/*
- * These symbols are defined by vdso32.S to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vdso32_default_start, vdso32_default_end;
-extern const char vdso32_sysenter_start, vdso32_sysenter_end;
 static struct page *vdso32_pages[1];
 
 #ifdef CONFIG_X86_64
 
 #define	vdso32_sysenter()	(boot_cpu_has(X86_FEATURE_SYSENTER32))
+#define	vdso32_syscall()	(boot_cpu_has(X86_FEATURE_SYSCALL32))
 
 /* May not be __init: called during resume */
 void syscall32_cpu_init(void)
@@ -226,6 +221,7 @@ static inline void map_compat_vdso(int map)
 #else  /* CONFIG_X86_32 */
 
 #define vdso32_sysenter()	(boot_cpu_has(X86_FEATURE_SEP))
+#define vdso32_syscall()	(0)
 
 void enable_sep_cpu(void)
 {
@@ -296,12 +292,15 @@ int __init sysenter_setup(void)
 	gate_vma_init();
 #endif
 
-	if (!vdso32_sysenter()) {
-		vsyscall = &vdso32_default_start;
-		vsyscall_len = &vdso32_default_end - &vdso32_default_start;
-	} else {
+	if (vdso32_syscall()) {
+		vsyscall = &vdso32_syscall_start;
+		vsyscall_len = &vdso32_syscall_end - &vdso32_syscall_start;
+	} else if (vdso32_sysenter()){
 		vsyscall = &vdso32_sysenter_start;
 		vsyscall_len = &vdso32_sysenter_end - &vdso32_sysenter_start;
+	} else {
+		vsyscall = &vdso32_int80_start;
+		vsyscall_len = &vdso32_int80_end - &vdso32_int80_start;
 	}
 
 	memcpy(syscall_page, vsyscall, vsyscall_len);
diff --git a/arch/x86/vdso/vdso32.S b/arch/x86/vdso/vdso32.S
index 1e36f72cab8..2ce5f82c333 100644
--- a/arch/x86/vdso/vdso32.S
+++ b/arch/x86/vdso/vdso32.S
@@ -2,14 +2,17 @@
 
 __INITDATA
 
-	.globl vdso32_default_start, vdso32_default_end
-vdso32_default_start:
-#ifdef CONFIG_X86_32
+	.globl vdso32_int80_start, vdso32_int80_end
+vdso32_int80_start:
 	.incbin "arch/x86/vdso/vdso32-int80.so"
-#else
+vdso32_int80_end:
+
+	.globl vdso32_syscall_start, vdso32_syscall_end
+vdso32_syscall_start:
+#ifdef CONFIG_COMPAT
 	.incbin "arch/x86/vdso/vdso32-syscall.so"
 #endif
-vdso32_default_end:
+vdso32_syscall_end:
 
 	.globl vdso32_sysenter_start, vdso32_sysenter_end
 vdso32_sysenter_start:
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index 19a6cfaf5db..257ba4a10ab 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -21,7 +21,8 @@ unsigned int __read_mostly vdso_enabled = 1;
 extern char vdso_start[], vdso_end[];
 extern unsigned short vdso_sync_cpuid;
 
-struct page **vdso_pages;
+static struct page **vdso_pages;
+static unsigned vdso_size;
 
 static inline void *var_ref(void *p, char *name)
 {
@@ -38,6 +39,7 @@ static int __init init_vdso_vars(void)
 	int i;
 	char *vbase;
 
+	vdso_size = npages << PAGE_SHIFT;
 	vdso_pages = kmalloc(sizeof(struct page *) * npages, GFP_KERNEL);
 	if (!vdso_pages)
 		goto oom;
@@ -101,20 +103,19 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack)
 	struct mm_struct *mm = current->mm;
 	unsigned long addr;
 	int ret;
-	unsigned len = round_up(vdso_end - vdso_start, PAGE_SIZE);
 
 	if (!vdso_enabled)
 		return 0;
 
 	down_write(&mm->mmap_sem);
-	addr = vdso_addr(mm->start_stack, len);
-	addr = get_unmapped_area(NULL, addr, len, 0, 0);
+	addr = vdso_addr(mm->start_stack, vdso_size);
+	addr = get_unmapped_area(NULL, addr, vdso_size, 0, 0);
 	if (IS_ERR_VALUE(addr)) {
 		ret = addr;
 		goto up_fail;
 	}
 
-	ret = install_special_mapping(mm, addr, len,
+	ret = install_special_mapping(mm, addr, vdso_size,
 				      VM_READ|VM_EXEC|
 				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
 				      VM_ALWAYSDUMP,
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index c2cc9958087..3815e425f47 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -6,8 +6,8 @@ config XEN
 	bool "Xen guest support"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on X86_32
-	depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER)
+	depends on X86_64 || (X86_32 && X86_PAE && !(X86_VISWS || X86_VOYAGER))
+	depends on X86_CMPXCHG && X86_TSC
 	help
 	  This is the Linux Xen port.  Enabling this will allow the
 	  kernel to boot in a paravirtualized environment under the
@@ -15,10 +15,16 @@ config XEN
 
 config XEN_MAX_DOMAIN_MEMORY
        int "Maximum allowed size of a domain in gigabytes"
-       default 8
+       default 8 if X86_32
+       default 32 if X86_64
        depends on XEN
        help
          The pseudo-physical to machine address array is sized
          according to the maximum possible memory size of a Xen
          domain.  This array uses 1 page per gigabyte, so there's no
-         need to be too stingy here.
\ No newline at end of file
+         need to be too stingy here.
+
+config XEN_SAVE_RESTORE
+       bool
+       depends on PM
+       default y
\ No newline at end of file
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 2ba2d164913..59c1e539aed 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -1,4 +1,4 @@
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o \
-			time.o xen-asm.o grant-table.o suspend.o
+			time.o xen-asm_$(BITS).o grant-table.o suspend.o
 
 obj-$(CONFIG_SMP)	+= smp.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bb508456ef5..a4e201b47f6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -33,6 +33,7 @@
 #include <xen/interface/sched.h>
 #include <xen/features.h>
 #include <xen/page.h>
+#include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
 #include <asm/page.h>
@@ -40,12 +41,12 @@
 #include <asm/xen/hypervisor.h>
 #include <asm/fixmap.h>
 #include <asm/processor.h>
+#include <asm/msr-index.h>
 #include <asm/setup.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/reboot.h>
-#include <asm/pgalloc.h>
 
 #include "xen-ops.h"
 #include "mmu.h"
@@ -57,6 +58,18 @@ DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
 DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 
 /*
+ * Identity map, in addition to plain kernel map.  This needs to be
+ * large enough to allocate page table pages to allocate the rest.
+ * Each page can map 2MB.
+ */
+static pte_t level1_ident_pgt[PTRS_PER_PTE * 4] __page_aligned_bss;
+
+#ifdef CONFIG_X86_64
+/* l3 pud for userspace vsyscall mapping */
+static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
+#endif /* CONFIG_X86_64 */
+
+/*
  * Note about cr3 (pagetable base) values:
  *
  * xen_cr3 contains the current logical cr3 value; it contains the
@@ -167,10 +180,14 @@ void xen_vcpu_restore(void)
 
 static void __init xen_banner(void)
 {
+	unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL);
+	struct xen_extraversion extra;
+	HYPERVISOR_xen_version(XENVER_extraversion, &extra);
+
 	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
 	       pv_info.name);
-	printk(KERN_INFO "Hypervisor signature: %s%s\n",
-	       xen_start_info->magic,
+	printk(KERN_INFO "Xen version: %d.%d%s%s\n",
+	       version >> 16, version & 0xffff, extra.extraversion,
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
@@ -363,14 +380,6 @@ static void load_TLS_descriptor(struct thread_struct *t,
 
 static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 {
-	xen_mc_batch();
-
-	load_TLS_descriptor(t, cpu, 0);
-	load_TLS_descriptor(t, cpu, 1);
-	load_TLS_descriptor(t, cpu, 2);
-
-	xen_mc_issue(PARAVIRT_LAZY_CPU);
-
 	/*
 	 * XXX sleazy hack: If we're being called in a lazy-cpu zone,
 	 * it means we're in a context switch, and %gs has just been
@@ -379,10 +388,39 @@ static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 	 * Either way, it has been saved, and the new value will get
 	 * loaded properly.  This will go away as soon as Xen has been
 	 * modified to not save/restore %gs for normal hypercalls.
+	 *
+	 * On x86_64, this hack is not used for %gs, because gs points
+	 * to KERNEL_GS_BASE (and uses it for PDA references), so we
+	 * must not zero %gs on x86_64
+	 *
+	 * For x86_64, we need to zero %fs, otherwise we may get an
+	 * exception between the new %fs descriptor being loaded and
+	 * %fs being effectively cleared at __switch_to().
 	 */
-	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)
+	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
+#ifdef CONFIG_X86_32
 		loadsegment(gs, 0);
+#else
+		loadsegment(fs, 0);
+#endif
+	}
+
+	xen_mc_batch();
+
+	load_TLS_descriptor(t, cpu, 0);
+	load_TLS_descriptor(t, cpu, 1);
+	load_TLS_descriptor(t, cpu, 2);
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
+#ifdef CONFIG_X86_64
+static void xen_load_gs_index(unsigned int idx)
+{
+	if (HYPERVISOR_set_segment_base(SEGBASE_GS_USER_SEL, idx))
+		BUG();
 }
+#endif
 
 static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 				const void *ptr)
@@ -400,23 +438,18 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 	preempt_enable();
 }
 
-static int cvt_gate_to_trap(int vector, u32 low, u32 high,
+static int cvt_gate_to_trap(int vector, const gate_desc *val,
 			    struct trap_info *info)
 {
-	u8 type, dpl;
-
-	type = (high >> 8) & 0x1f;
-	dpl = (high >> 13) & 3;
-
-	if (type != 0xf && type != 0xe)
+	if (val->type != 0xf && val->type != 0xe)
 		return 0;
 
 	info->vector = vector;
-	info->address = (high & 0xffff0000) | (low & 0x0000ffff);
-	info->cs = low >> 16;
-	info->flags = dpl;
+	info->address = gate_offset(*val);
+	info->cs = gate_segment(*val);
+	info->flags = val->dpl;
 	/* interrupt gates clear IF */
-	if (type == 0xe)
+	if (val->type == 0xe)
 		info->flags |= 4;
 
 	return 1;
@@ -443,11 +476,10 @@ static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g)
 
 	if (p >= start && (p + 8) <= end) {
 		struct trap_info info[2];
-		u32 *desc = (u32 *)g;
 
 		info[1].address = 0;
 
-		if (cvt_gate_to_trap(entrynum, desc[0], desc[1], &info[0]))
+		if (cvt_gate_to_trap(entrynum, g, &info[0]))
 			if (HYPERVISOR_set_trap_table(info))
 				BUG();
 	}
@@ -460,13 +492,13 @@ static void xen_convert_trap_info(const struct desc_ptr *desc,
 {
 	unsigned in, out, count;
 
-	count = (desc->size+1) / 8;
+	count = (desc->size+1) / sizeof(gate_desc);
 	BUG_ON(count > 256);
 
 	for (in = out = 0; in < count; in++) {
-		const u32 *entry = (u32 *)(desc->address + in * 8);
+		gate_desc *entry = (gate_desc*)(desc->address) + in;
 
-		if (cvt_gate_to_trap(in, entry[0], entry[1], &traps[out]))
+		if (cvt_gate_to_trap(in, entry, &traps[out]))
 			out++;
 	}
 	traps[out].address = 0;
@@ -695,33 +727,89 @@ static void set_current_cr3(void *v)
 	x86_write_percpu(xen_current_cr3, (unsigned long)v);
 }
 
-static void xen_write_cr3(unsigned long cr3)
+static void __xen_write_cr3(bool kernel, unsigned long cr3)
 {
 	struct mmuext_op *op;
 	struct multicall_space mcs;
-	unsigned long mfn = pfn_to_mfn(PFN_DOWN(cr3));
+	unsigned long mfn;
 
-	BUG_ON(preemptible());
+	if (cr3)
+		mfn = pfn_to_mfn(PFN_DOWN(cr3));
+	else
+		mfn = 0;
 
-	mcs = xen_mc_entry(sizeof(*op));  /* disables interrupts */
+	WARN_ON(mfn == 0 && kernel);
 
-	/* Update while interrupts are disabled, so its atomic with
-	   respect to ipis */
-	x86_write_percpu(xen_cr3, cr3);
+	mcs = __xen_mc_entry(sizeof(*op));
 
 	op = mcs.args;
-	op->cmd = MMUEXT_NEW_BASEPTR;
+	op->cmd = kernel ? MMUEXT_NEW_BASEPTR : MMUEXT_NEW_USER_BASEPTR;
 	op->arg1.mfn = mfn;
 
 	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
 
-	/* Update xen_update_cr3 once the batch has actually
-	   been submitted. */
-	xen_mc_callback(set_current_cr3, (void *)cr3);
+	if (kernel) {
+		x86_write_percpu(xen_cr3, cr3);
+
+		/* Update xen_current_cr3 once the batch has actually
+		   been submitted. */
+		xen_mc_callback(set_current_cr3, (void *)cr3);
+	}
+}
+
+static void xen_write_cr3(unsigned long cr3)
+{
+	BUG_ON(preemptible());
+
+	xen_mc_batch();  /* disables interrupts */
+
+	/* Update while interrupts are disabled, so its atomic with
+	   respect to ipis */
+	x86_write_percpu(xen_cr3, cr3);
+
+	__xen_write_cr3(true, cr3);
+
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
+		if (user_pgd)
+			__xen_write_cr3(false, __pa(user_pgd));
+		else
+			__xen_write_cr3(false, 0);
+	}
+#endif
 
 	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
 }
 
+static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
+{
+	int ret;
+
+	ret = 0;
+
+	switch(msr) {
+#ifdef CONFIG_X86_64
+		unsigned which;
+		u64 base;
+
+	case MSR_FS_BASE:		which = SEGBASE_FS; goto set;
+	case MSR_KERNEL_GS_BASE:	which = SEGBASE_GS_USER; goto set;
+	case MSR_GS_BASE:		which = SEGBASE_GS_KERNEL; goto set;
+
+	set:
+		base = ((u64)high << 32) | low;
+		if (HYPERVISOR_set_segment_base(which, base) != 0)
+			ret = -EFAULT;
+		break;
+#endif
+	default:
+		ret = native_write_msr_safe(msr, low, high);
+	}
+
+	return ret;
+}
+
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
 static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn)
@@ -778,6 +866,48 @@ static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn)
 	xen_alloc_ptpage(mm, pfn, PT_PMD);
 }
 
+static int xen_pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = mm->pgd;
+	int ret = 0;
+
+	BUG_ON(PagePinned(virt_to_page(pgd)));
+
+#ifdef CONFIG_X86_64
+	{
+		struct page *page = virt_to_page(pgd);
+		pgd_t *user_pgd;
+
+		BUG_ON(page->private != 0);
+
+		ret = -ENOMEM;
+
+		user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+		page->private = (unsigned long)user_pgd;
+
+		if (user_pgd != NULL) {
+			user_pgd[pgd_index(VSYSCALL_START)] =
+				__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
+			ret = 0;
+		}
+
+		BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
+	}
+#endif
+
+	return ret;
+}
+
+static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+#ifdef CONFIG_X86_64
+	pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+	if (user_pgd)
+		free_page((unsigned long)user_pgd);
+#endif
+}
+
 /* This should never happen until we're OK to use struct page */
 static void xen_release_ptpage(u32 pfn, unsigned level)
 {
@@ -803,6 +933,18 @@ static void xen_release_pmd(u32 pfn)
 	xen_release_ptpage(pfn, PT_PMD);
 }
 
+#if PAGETABLE_LEVELS == 4
+static void xen_alloc_pud(struct mm_struct *mm, u32 pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PUD);
+}
+
+static void xen_release_pud(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PUD);
+}
+#endif
+
 #ifdef CONFIG_HIGHPTE
 static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
 {
@@ -841,68 +983,16 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
 
 static __init void xen_pagetable_setup_start(pgd_t *base)
 {
-	pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base;
-	int i;
-
-	/* special set_pte for pagetable initialization */
-	pv_mmu_ops.set_pte = xen_set_pte_init;
-
-	init_mm.pgd = base;
-	/*
-	 * copy top-level of Xen-supplied pagetable into place.  This
-	 * is a stand-in while we copy the pmd pages.
-	 */
-	memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
-	/*
-	 * For PAE, need to allocate new pmds, rather than
-	 * share Xen's, since Xen doesn't like pmd's being
-	 * shared between address spaces.
-	 */
-	for (i = 0; i < PTRS_PER_PGD; i++) {
-		if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
-			pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-
-			memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
-			       PAGE_SIZE);
-
-			make_lowmem_page_readonly(pmd);
-
-			set_pgd(&base[i], __pgd(1 + __pa(pmd)));
-		} else
-			pgd_clear(&base[i]);
-	}
-
-	/* make sure zero_page is mapped RO so we can use it in pagetables */
-	make_lowmem_page_readonly(empty_zero_page);
-	make_lowmem_page_readonly(base);
-	/*
-	 * Switch to new pagetable.  This is done before
-	 * pagetable_init has done anything so that the new pages
-	 * added to the table can be prepared properly for Xen.
-	 */
-	xen_write_cr3(__pa(base));
-
-	/* Unpin initial Xen pagetable */
-	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
-			  PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
 void xen_setup_shared_info(void)
 {
 	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
-		unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
-		/*
-		 * Create a mapping for the shared info page.
-		 * Should be set_fixmap(), but shared_info is a machine
-		 * address with no corresponding pseudo-phys address.
-		 */
-		set_pte_mfn(addr,
-			    PFN_DOWN(xen_start_info->shared_info),
-			    PAGE_KERNEL);
-
-		HYPERVISOR_shared_info = (struct shared_info *)addr;
+		set_fixmap(FIX_PARAVIRT_BOOTMAP,
+			   xen_start_info->shared_info);
+
+		HYPERVISOR_shared_info =
+			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
 	} else
 		HYPERVISOR_shared_info =
 			(struct shared_info *)__va(xen_start_info->shared_info);
@@ -917,26 +1007,32 @@ void xen_setup_shared_info(void)
 
 static __init void xen_pagetable_setup_done(pgd_t *base)
 {
-	/* This will work as long as patching hasn't happened yet
-	   (which it hasn't) */
-	pv_mmu_ops.alloc_pte = xen_alloc_pte;
-	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
-	pv_mmu_ops.release_pte = xen_release_pte;
-	pv_mmu_ops.release_pmd = xen_release_pmd;
-	pv_mmu_ops.set_pte = xen_set_pte;
-
 	xen_setup_shared_info();
-
-	/* Actually pin the pagetable down, but we can't set PG_pinned
-	   yet because the page structures don't exist yet. */
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base)));
 }
 
 static __init void xen_post_allocator_init(void)
 {
+	pv_mmu_ops.set_pte = xen_set_pte;
 	pv_mmu_ops.set_pmd = xen_set_pmd;
 	pv_mmu_ops.set_pud = xen_set_pud;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.set_pgd = xen_set_pgd;
+#endif
+
+	/* This will work as long as patching hasn't happened yet
+	   (which it hasn't) */
+	pv_mmu_ops.alloc_pte = xen_alloc_pte;
+	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
+	pv_mmu_ops.release_pte = xen_release_pte;
+	pv_mmu_ops.release_pmd = xen_release_pmd;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.alloc_pud = xen_alloc_pud;
+	pv_mmu_ops.release_pud = xen_release_pud;
+#endif
 
+#ifdef CONFIG_X86_64
+	SetPagePinned(virt_to_page(level3_user_vsyscall));
+#endif
 	xen_mark_init_mm_pinned();
 }
 
@@ -950,6 +1046,7 @@ void xen_setup_vcpu_info_placement(void)
 
 	/* xen_vcpu_setup managed to place the vcpu_info within the
 	   percpu area for all cpus, so make use of it */
+#ifdef CONFIG_X86_32
 	if (have_vcpu_info_placement) {
 		printk(KERN_INFO "Xen: using vcpu_info placement\n");
 
@@ -959,6 +1056,7 @@ void xen_setup_vcpu_info_placement(void)
 		pv_irq_ops.irq_enable = xen_irq_enable_direct;
 		pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
 	}
+#endif
 }
 
 static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
@@ -979,10 +1077,12 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
 	goto patch_site
 
 	switch (type) {
+#ifdef CONFIG_X86_32
 		SITE(pv_irq_ops, irq_enable);
 		SITE(pv_irq_ops, irq_disable);
 		SITE(pv_irq_ops, save_fl);
 		SITE(pv_irq_ops, restore_fl);
+#endif /* CONFIG_X86_32 */
 #undef SITE
 
 	patch_site:
@@ -1025,8 +1125,15 @@ static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
 #ifdef CONFIG_X86_F00F_BUG
 	case FIX_F00F_IDT:
 #endif
+#ifdef CONFIG_X86_32
 	case FIX_WP_TEST:
 	case FIX_VDSO:
+# ifdef CONFIG_HIGHMEM
+	case FIX_KMAP_BEGIN ... FIX_KMAP_END:
+# endif
+#else
+	case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE:
+#endif
 #ifdef CONFIG_X86_LOCAL_APIC
 	case FIX_APIC_BASE:	/* maps dummy local APIC */
 #endif
@@ -1039,6 +1146,15 @@ static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
 	}
 
 	__native_set_fixmap(idx, pte);
+
+#ifdef CONFIG_X86_64
+	/* Replicate changes to map the vsyscall page into the user
+	   pagetable vsyscall mapping. */
+	if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) {
+		unsigned long vaddr = __fix_to_virt(idx);
+		set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte);
+	}
+#endif
 }
 
 static const struct pv_info xen_info __initdata = {
@@ -1084,18 +1200,25 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.wbinvd = native_wbinvd,
 
 	.read_msr = native_read_msr_safe,
-	.write_msr = native_write_msr_safe,
+	.write_msr = xen_write_msr_safe,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 
 	.iret = xen_iret,
 	.irq_enable_sysexit = xen_sysexit,
+#ifdef CONFIG_X86_64
+	.usergs_sysret32 = xen_sysret32,
+	.usergs_sysret64 = xen_sysret64,
+#endif
 
 	.load_tr_desc = paravirt_nop,
 	.set_ldt = xen_set_ldt,
 	.load_gdt = xen_load_gdt,
 	.load_idt = xen_load_idt,
 	.load_tls = xen_load_tls,
+#ifdef CONFIG_X86_64
+	.load_gs_index = xen_load_gs_index,
+#endif
 
 	.store_gdt = native_store_gdt,
 	.store_idt = native_store_idt,
@@ -1109,14 +1232,34 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.set_iopl_mask = xen_set_iopl_mask,
 	.io_delay = xen_io_delay,
 
+	/* Xen takes care of %gs when switching to usermode for us */
+	.swapgs = paravirt_nop,
+
 	.lazy_mode = {
 		.enter = paravirt_enter_lazy_cpu,
 		.leave = xen_leave_lazy,
 	},
 };
 
+static void __init __xen_init_IRQ(void)
+{
+#ifdef CONFIG_X86_64
+	int i;
+
+	/* Create identity vector->irq map */
+	for(i = 0; i < NR_VECTORS; i++) {
+		int cpu;
+
+		for_each_possible_cpu(cpu)
+			per_cpu(vector_irq, cpu)[i] = i;
+	}
+#endif	/* CONFIG_X86_64 */
+
+	xen_init_IRQ();
+}
+
 static const struct pv_irq_ops xen_irq_ops __initdata = {
-	.init_IRQ = xen_init_IRQ,
+	.init_IRQ = __xen_init_IRQ,
 	.save_fl = xen_save_fl,
 	.restore_fl = xen_restore_fl,
 	.irq_disable = xen_irq_disable,
@@ -1124,14 +1267,13 @@ static const struct pv_irq_ops xen_irq_ops __initdata = {
 	.safe_halt = xen_safe_halt,
 	.halt = xen_halt,
 #ifdef CONFIG_X86_64
-	.adjust_exception_frame = paravirt_nop,
+	.adjust_exception_frame = xen_adjust_exception_frame,
 #endif
 };
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
 	.apic_write = xen_apic_write,
-	.apic_write_atomic = xen_apic_write,
 	.apic_read = xen_apic_read,
 	.setup_boot_clock = paravirt_nop,
 	.setup_secondary_clock = paravirt_nop,
@@ -1157,8 +1299,8 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.pte_update = paravirt_nop,
 	.pte_update_defer = paravirt_nop,
 
-	.pgd_alloc = __paravirt_pgd_alloc,
-	.pgd_free = paravirt_nop,
+	.pgd_alloc = xen_pgd_alloc,
+	.pgd_free = xen_pgd_free,
 
 	.alloc_pte = xen_alloc_pte_init,
 	.release_pte = xen_release_pte_init,
@@ -1170,7 +1312,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.kmap_atomic_pte = xen_kmap_atomic_pte,
 #endif
 
-	.set_pte = NULL,	/* see xen_pagetable_setup_* */
+#ifdef CONFIG_X86_64
+	.set_pte = xen_set_pte,
+#else
+	.set_pte = xen_set_pte_init,
+#endif
 	.set_pte_at = xen_set_pte_at,
 	.set_pmd = xen_set_pmd_hyper,
 
@@ -1178,21 +1324,32 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
 	.pte_val = xen_pte_val,
-	.pte_flags = native_pte_val,
+	.pte_flags = native_pte_flags,
 	.pgd_val = xen_pgd_val,
 
 	.make_pte = xen_make_pte,
 	.make_pgd = xen_make_pgd,
 
+#ifdef CONFIG_X86_PAE
 	.set_pte_atomic = xen_set_pte_atomic,
 	.set_pte_present = xen_set_pte_at,
-	.set_pud = xen_set_pud_hyper,
 	.pte_clear = xen_pte_clear,
 	.pmd_clear = xen_pmd_clear,
+#endif	/* CONFIG_X86_PAE */
+	.set_pud = xen_set_pud_hyper,
 
 	.make_pmd = xen_make_pmd,
 	.pmd_val = xen_pmd_val,
 
+#if PAGETABLE_LEVELS == 4
+	.pud_val = xen_pud_val,
+	.make_pud = xen_make_pud,
+	.set_pgd = xen_set_pgd_hyper,
+
+	.alloc_pud = xen_alloc_pte_init,
+	.release_pud = xen_release_pte_init,
+#endif	/* PAGETABLE_LEVELS == 4 */
+
 	.activate_mm = xen_activate_mm,
 	.dup_mmap = xen_dup_mmap,
 	.exit_mmap = xen_exit_mmap,
@@ -1205,21 +1362,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.set_fixmap = xen_set_fixmap,
 };
 
-#ifdef CONFIG_SMP
-static const struct smp_ops xen_smp_ops __initdata = {
-	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
-	.smp_prepare_cpus = xen_smp_prepare_cpus,
-	.cpu_up = xen_cpu_up,
-	.smp_cpus_done = xen_smp_cpus_done,
-
-	.smp_send_stop = xen_smp_send_stop,
-	.smp_send_reschedule = xen_smp_send_reschedule,
-
-	.send_call_func_ipi = xen_smp_send_call_function_ipi,
-	.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi,
-};
-#endif	/* CONFIG_SMP */
-
 static void xen_reboot(int reason)
 {
 	struct sched_shutdown r = { .reason = reason };
@@ -1264,6 +1406,7 @@ static const struct machine_ops __initdata xen_machine_ops = {
 
 static void __init xen_reserve_top(void)
 {
+#ifdef CONFIG_X86_32
 	unsigned long top = HYPERVISOR_VIRT_START;
 	struct xen_platform_parameters pp;
 
@@ -1271,8 +1414,248 @@ static void __init xen_reserve_top(void)
 		top = pp.virt_start;
 
 	reserve_top_address(-top + 2 * PAGE_SIZE);
+#endif	/* CONFIG_X86_32 */
+}
+
+/*
+ * Like __va(), but returns address in the kernel mapping (which is
+ * all we have until the physical memory mapping has been set up.
+ */
+static void *__ka(phys_addr_t paddr)
+{
+#ifdef CONFIG_X86_64
+	return (void *)(paddr + __START_KERNEL_map);
+#else
+	return __va(paddr);
+#endif
 }
 
+/* Convert a machine address to physical address */
+static unsigned long m2p(phys_addr_t maddr)
+{
+	phys_addr_t paddr;
+
+	maddr &= PTE_PFN_MASK;
+	paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
+
+	return paddr;
+}
+
+/* Convert a machine address to kernel virtual */
+static void *m2v(phys_addr_t maddr)
+{
+	return __ka(m2p(maddr));
+}
+
+#ifdef CONFIG_X86_64
+static void walk(pgd_t *pgd, unsigned long addr)
+{
+	unsigned l4idx = pgd_index(addr);
+	unsigned l3idx = pud_index(addr);
+	unsigned l2idx = pmd_index(addr);
+	unsigned l1idx = pte_index(addr);
+	pgd_t l4;
+	pud_t l3;
+	pmd_t l2;
+	pte_t l1;
+
+	xen_raw_printk("walk %p, %lx -> %d %d %d %d\n",
+		       pgd, addr, l4idx, l3idx, l2idx, l1idx);
+
+	l4 = pgd[l4idx];
+	xen_raw_printk("  l4: %016lx\n", l4.pgd);
+	xen_raw_printk("      %016lx\n", pgd_val(l4));
+
+	l3 = ((pud_t *)(m2v(l4.pgd)))[l3idx];
+	xen_raw_printk("  l3: %016lx\n", l3.pud);
+	xen_raw_printk("      %016lx\n", pud_val(l3));
+
+	l2 = ((pmd_t *)(m2v(l3.pud)))[l2idx];
+	xen_raw_printk("  l2: %016lx\n", l2.pmd);
+	xen_raw_printk("      %016lx\n", pmd_val(l2));
+
+	l1 = ((pte_t *)(m2v(l2.pmd)))[l1idx];
+	xen_raw_printk("  l1: %016lx\n", l1.pte);
+	xen_raw_printk("      %016lx\n", pte_val(l1));
+}
+#endif
+
+static void set_page_prot(void *addr, pgprot_t prot)
+{
+	unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
+	pte_t pte = pfn_pte(pfn, prot);
+
+	xen_raw_printk("addr=%p pfn=%lx mfn=%lx prot=%016llx pte=%016llx\n",
+		       addr, pfn, get_phys_to_machine(pfn),
+		       pgprot_val(prot), pte.pte);
+
+	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
+		BUG();
+}
+
+static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
+{
+	unsigned pmdidx, pteidx;
+	unsigned ident_pte;
+	unsigned long pfn;
+
+	ident_pte = 0;
+	pfn = 0;
+	for(pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
+		pte_t *pte_page;
+
+		/* Reuse or allocate a page of ptes */
+		if (pmd_present(pmd[pmdidx]))
+			pte_page = m2v(pmd[pmdidx].pmd);
+		else {
+			/* Check for free pte pages */
+			if (ident_pte == ARRAY_SIZE(level1_ident_pgt))
+				break;
+
+			pte_page = &level1_ident_pgt[ident_pte];
+			ident_pte += PTRS_PER_PTE;
+
+			pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
+		}
+
+		/* Install mappings */
+		for(pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
+			pte_t pte;
+
+			if (pfn > max_pfn_mapped)
+				max_pfn_mapped = pfn;
+
+			if (!pte_none(pte_page[pteidx]))
+				continue;
+
+			pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
+			pte_page[pteidx] = pte;
+		}
+	}
+
+	for(pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
+		set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
+
+	set_page_prot(pmd, PAGE_KERNEL_RO);
+}
+
+#ifdef CONFIG_X86_64
+static void convert_pfn_mfn(void *v)
+{
+	pte_t *pte = v;
+	int i;
+
+	/* All levels are converted the same way, so just treat them
+	   as ptes. */
+	for(i = 0; i < PTRS_PER_PTE; i++)
+		pte[i] = xen_make_pte(pte[i].pte);
+}
+
+/*
+ * Set up the inital kernel pagetable.
+ *
+ * We can construct this by grafting the Xen provided pagetable into
+ * head_64.S's preconstructed pagetables.  We copy the Xen L2's into
+ * level2_ident_pgt, level2_kernel_pgt and level2_fixmap_pgt.  This
+ * means that only the kernel has a physical mapping to start with -
+ * but that's enough to get __va working.  We need to fill in the rest
+ * of the physical mapping once some sort of allocator has been set
+ * up.
+ */
+static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
+{
+	pud_t *l3;
+	pmd_t *l2;
+
+	/* Zap identity mapping */
+	init_level4_pgt[0] = __pgd(0);
+
+	/* Pre-constructed entries are in pfn, so convert to mfn */
+	convert_pfn_mfn(init_level4_pgt);
+	convert_pfn_mfn(level3_ident_pgt);
+	convert_pfn_mfn(level3_kernel_pgt);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
+
+	memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
+	memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	/* Set up identity map */
+	xen_map_identity_early(level2_ident_pgt, max_pfn);
+
+	/* Make pagetable pieces RO */
+	set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
+
+	/* Pin down new L4 */
+	pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
+			  PFN_DOWN(__pa_symbol(init_level4_pgt)));
+
+	/* Unpin Xen-provided one */
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	/* Switch over */
+	pgd = init_level4_pgt;
+
+	/*
+	 * At this stage there can be no user pgd, and no page
+	 * structure to attach it to, so make sure we just set kernel
+	 * pgd.
+	 */
+	xen_mc_batch();
+	__xen_write_cr3(true, __pa(pgd));
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+
+	reserve_early(__pa(xen_start_info->pt_base),
+		      __pa(xen_start_info->pt_base +
+			   xen_start_info->nr_pt_frames * PAGE_SIZE),
+		      "XEN PAGETABLES");
+
+	return pgd;
+}
+#else	/* !CONFIG_X86_64 */
+static pmd_t level2_kernel_pgt[PTRS_PER_PMD] __page_aligned_bss;
+
+static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
+{
+	pmd_t *kernel_pmd;
+
+	init_pg_tables_start = __pa(pgd);
+	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
+	max_pfn_mapped = PFN_DOWN(init_pg_tables_end + 512*1024);
+
+	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
+	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+
+	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
+			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	xen_write_cr3(__pa(swapper_pg_dir));
+
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+
+	return swapper_pg_dir;
+}
+#endif	/* CONFIG_X86_64 */
+
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
@@ -1301,53 +1684,56 @@ asmlinkage void __init xen_start_kernel(void)
 
 	machine_ops = xen_machine_ops;
 
-#ifdef CONFIG_SMP
-	smp_ops = xen_smp_ops;
+#ifdef CONFIG_X86_64
+	/* Disable until direct per-cpu data access. */
+	have_vcpu_info_placement = 0;
+	x86_64_init_pda();
 #endif
 
+	xen_smp_init();
+
 	/* Get mfn list */
 	if (!xen_feature(XENFEAT_auto_translated_physmap))
 		xen_build_dynamic_phys_to_machine();
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-	init_pg_tables_start = __pa(pgd);
-	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
-	max_pfn_mapped = (init_pg_tables_end + 512*1024) >> PAGE_SHIFT;
-
-	init_mm.pgd = pgd; /* use the Xen pagetables to start */
-
-	/* keep using Xen gdt for now; no urgent need to change it */
-
-	x86_write_percpu(xen_cr3, __pa(pgd));
-	x86_write_percpu(xen_current_cr3, __pa(pgd));
+	/* Prevent unwanted bits from being set in PTEs. */
+	__supported_pte_mask &= ~_PAGE_GLOBAL;
+	if (!is_initial_xendomain())
+		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
 
+	xen_raw_console_write("mapping kernel into physical memory\n");
+	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
+
+	init_mm.pgd = pgd;
+
+	/* keep using Xen gdt for now; no urgent need to change it */
+
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))
 		pv_info.kernel_rpl = 0;
 
-	/* Prevent unwanted bits from being set in PTEs. */
-	__supported_pte_mask &= ~_PAGE_GLOBAL;
-	if (!is_initial_xendomain())
-		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
 	/* set the limit of our address space */
 	xen_reserve_top();
 
+#ifdef CONFIG_X86_32
 	/* set up basic CPUID stuff */
 	cpu_detect(&new_cpu_data);
 	new_cpu_data.hard_math = 1;
 	new_cpu_data.x86_capability[0] = cpuid_edx(1);
+#endif
 
 	/* Poke various useful things into boot_params */
 	boot_params.hdr.type_of_loader = (9 << 4) | 0;
 	boot_params.hdr.ramdisk_image = xen_start_info->mod_start
 		? __pa(xen_start_info->mod_start) : 0;
 	boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
+	boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
 
 	if (!is_initial_xendomain()) {
 		add_preferred_console("xenboot", 0, NULL);
@@ -1355,6 +1741,21 @@ asmlinkage void __init xen_start_kernel(void)
 		add_preferred_console("hvc", 0, NULL);
 	}
 
+	xen_raw_console_write("about to get started...\n");
+
+#if 0
+	xen_raw_printk("&boot_params=%p __pa(&boot_params)=%lx __va(__pa(&boot_params))=%lx\n",
+		       &boot_params, __pa_symbol(&boot_params),
+		       __va(__pa_symbol(&boot_params)));
+
+	walk(pgd, &boot_params);
+	walk(pgd, __va(__pa(&boot_params)));
+#endif
+
 	/* Start the world */
+#ifdef CONFIG_X86_32
 	i386_start_kernel();
+#else
+	x86_64_start_reservations((char *)__pa_symbol(&boot_params));
+#endif
 }
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index ff0aa74afaa..aa37469da69 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -44,8 +44,10 @@
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
+#include <asm/fixmap.h>
 #include <asm/mmu_context.h>
 #include <asm/paravirt.h>
+#include <asm/linkage.h>
 
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
@@ -56,26 +58,29 @@
 #include "multicalls.h"
 #include "mmu.h"
 
+/*
+ * Just beyond the highest usermode address.  STACK_TOP_MAX has a
+ * redzone above it, so round it up to a PGD boundary.
+ */
+#define USER_LIMIT	((STACK_TOP_MAX + PGDIR_SIZE - 1) & PGDIR_MASK)
+
+
 #define P2M_ENTRIES_PER_PAGE	(PAGE_SIZE / sizeof(unsigned long))
 #define TOP_ENTRIES		(MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE)
 
 /* Placeholder for holes in the address space */
-static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE]
-	__attribute__((section(".data.page_aligned"))) =
+static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] __page_aligned_data =
 		{ [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL };
 
  /* Array of pointers to pages containing p2m entries */
-static unsigned long *p2m_top[TOP_ENTRIES]
-	__attribute__((section(".data.page_aligned"))) =
+static unsigned long *p2m_top[TOP_ENTRIES] __page_aligned_data =
 		{ [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] };
 
 /* Arrays of p2m arrays expressed in mfns used for save/restore */
-static unsigned long p2m_top_mfn[TOP_ENTRIES]
-	__attribute__((section(".bss.page_aligned")));
+static unsigned long p2m_top_mfn[TOP_ENTRIES] __page_aligned_bss;
 
-static unsigned long p2m_top_mfn_list[
-			PAGE_ALIGN(TOP_ENTRIES / P2M_ENTRIES_PER_PAGE)]
-	__attribute__((section(".bss.page_aligned")));
+static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE]
+	__page_aligned_bss;
 
 static inline unsigned p2m_top_index(unsigned long pfn)
 {
@@ -181,15 +186,16 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 	p2m_top[topidx][idx] = mfn;
 }
 
-xmaddr_t arbitrary_virt_to_machine(unsigned long address)
+xmaddr_t arbitrary_virt_to_machine(void *vaddr)
 {
+	unsigned long address = (unsigned long)vaddr;
 	unsigned int level;
 	pte_t *pte = lookup_address(address, &level);
 	unsigned offset = address & ~PAGE_MASK;
 
 	BUG_ON(pte == NULL);
 
-	return XMADDR((pte_mfn(*pte) << PAGE_SHIFT) + offset);
+	return XMADDR(((phys_addr_t)pte_mfn(*pte) << PAGE_SHIFT) + offset);
 }
 
 void make_lowmem_page_readonly(void *vaddr)
@@ -256,7 +262,8 @@ void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val)
 
 	xen_mc_batch();
 
-	u.ptr = virt_to_machine(ptr).maddr;
+	/* ptr may be ioremapped for 64-bit pagetable setup */
+	u.ptr = arbitrary_virt_to_machine(ptr).maddr;
 	u.val = pmd_val_ma(val);
 	extend_mmu_update(&u);
 
@@ -283,35 +290,7 @@ void xen_set_pmd(pmd_t *ptr, pmd_t val)
  */
 void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags)
 {
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	pgd = swapper_pg_dir + pgd_index(vaddr);
-	if (pgd_none(*pgd)) {
-		BUG();
-		return;
-	}
-	pud = pud_offset(pgd, vaddr);
-	if (pud_none(*pud)) {
-		BUG();
-		return;
-	}
-	pmd = pmd_offset(pud, vaddr);
-	if (pmd_none(*pmd)) {
-		BUG();
-		return;
-	}
-	pte = pte_offset_kernel(pmd, vaddr);
-	/* <mfn,flags> stored as-is, to permit clearing entries */
-	xen_set_pte(pte, mfn_pte(mfn, flags));
-
-	/*
-	 * It's enough to flush this one mapping.
-	 * (PGE mappings get flushed as well)
-	 */
-	__flush_tlb_one(vaddr);
+	set_pte_vaddr(vaddr, mfn_pte(mfn, flags));
 }
 
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
@@ -364,8 +343,8 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
-		unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_MASK;
+		unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		pteval_t flags = val & PTE_FLAGS_MASK;
 		val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
 	}
 
@@ -375,8 +354,8 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 static pteval_t pte_pfn_to_mfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
-		unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_MASK;
+		unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		pteval_t flags = val & PTE_FLAGS_MASK;
 		val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
 	}
 
@@ -418,7 +397,8 @@ void xen_set_pud_hyper(pud_t *ptr, pud_t val)
 
 	xen_mc_batch();
 
-	u.ptr = virt_to_machine(ptr).maddr;
+	/* ptr may be ioremapped for 64-bit pagetable setup */
+	u.ptr = arbitrary_virt_to_machine(ptr).maddr;
 	u.val = pud_val_ma(val);
 	extend_mmu_update(&u);
 
@@ -441,14 +421,19 @@ void xen_set_pud(pud_t *ptr, pud_t val)
 
 void xen_set_pte(pte_t *ptep, pte_t pte)
 {
+#ifdef CONFIG_X86_PAE
 	ptep->pte_high = pte.pte_high;
 	smp_wmb();
 	ptep->pte_low = pte.pte_low;
+#else
+	*ptep = pte;
+#endif
 }
 
+#ifdef CONFIG_X86_PAE
 void xen_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
-	set_64bit((u64 *)ptep, pte_val_ma(pte));
+	set_64bit((u64 *)ptep, native_pte_val(pte));
 }
 
 void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
@@ -462,6 +447,7 @@ void xen_pmd_clear(pmd_t *pmdp)
 {
 	set_pmd(pmdp, __pmd(0));
 }
+#endif	/* CONFIG_X86_PAE */
 
 pmd_t xen_make_pmd(pmdval_t pmd)
 {
@@ -469,78 +455,189 @@ pmd_t xen_make_pmd(pmdval_t pmd)
 	return native_make_pmd(pmd);
 }
 
+#if PAGETABLE_LEVELS == 4
+pudval_t xen_pud_val(pud_t pud)
+{
+	return pte_mfn_to_pfn(pud.pud);
+}
+
+pud_t xen_make_pud(pudval_t pud)
+{
+	pud = pte_pfn_to_mfn(pud);
+
+	return native_make_pud(pud);
+}
+
+pgd_t *xen_get_user_pgd(pgd_t *pgd)
+{
+	pgd_t *pgd_page = (pgd_t *)(((unsigned long)pgd) & PAGE_MASK);
+	unsigned offset = pgd - pgd_page;
+	pgd_t *user_ptr = NULL;
+
+	if (offset < pgd_index(USER_LIMIT)) {
+		struct page *page = virt_to_page(pgd_page);
+		user_ptr = (pgd_t *)page->private;
+		if (user_ptr)
+			user_ptr += offset;
+	}
+
+	return user_ptr;
+}
+
+static void __xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
+{
+	struct mmu_update u;
+
+	u.ptr = virt_to_machine(ptr).maddr;
+	u.val = pgd_val_ma(val);
+	extend_mmu_update(&u);
+}
+
+/*
+ * Raw hypercall-based set_pgd, intended for in early boot before
+ * there's a page structure.  This implies:
+ *  1. The only existing pagetable is the kernel's
+ *  2. It is always pinned
+ *  3. It has no user pagetable attached to it
+ */
+void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
+{
+	preempt_disable();
+
+	xen_mc_batch();
+
+	__xen_set_pgd_hyper(ptr, val);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+void xen_set_pgd(pgd_t *ptr, pgd_t val)
+{
+	pgd_t *user_ptr = xen_get_user_pgd(ptr);
+
+	/* If page is not pinned, we can just update the entry
+	   directly */
+	if (!page_pinned(ptr)) {
+		*ptr = val;
+		if (user_ptr) {
+			WARN_ON(page_pinned(user_ptr));
+			*user_ptr = val;
+		}
+		return;
+	}
+
+	/* If it's pinned, then we can at least batch the kernel and
+	   user updates together. */
+	xen_mc_batch();
+
+	__xen_set_pgd_hyper(ptr, val);
+	if (user_ptr)
+		__xen_set_pgd_hyper(user_ptr, val);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+#endif	/* PAGETABLE_LEVELS == 4 */
+
 /*
-  (Yet another) pagetable walker.  This one is intended for pinning a
-  pagetable.  This means that it walks a pagetable and calls the
-  callback function on each page it finds making up the page table,
-  at every level.  It walks the entire pagetable, but it only bothers
-  pinning pte pages which are below pte_limit.  In the normal case
-  this will be TASK_SIZE, but at boot we need to pin up to
-  FIXADDR_TOP.  But the important bit is that we don't pin beyond
-  there, because then we start getting into Xen's ptes.
-*/
-static int pgd_walk(pgd_t *pgd_base, int (*func)(struct page *, enum pt_level),
+ * (Yet another) pagetable walker.  This one is intended for pinning a
+ * pagetable.  This means that it walks a pagetable and calls the
+ * callback function on each page it finds making up the page table,
+ * at every level.  It walks the entire pagetable, but it only bothers
+ * pinning pte pages which are below limit.  In the normal case this
+ * will be STACK_TOP_MAX, but at boot we need to pin up to
+ * FIXADDR_TOP.
+ *
+ * For 32-bit the important bit is that we don't pin beyond there,
+ * because then we start getting into Xen's ptes.
+ *
+ * For 64-bit, we must skip the Xen hole in the middle of the address
+ * space, just after the big x86-64 virtual hole.
+ */
+static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
 		    unsigned long limit)
 {
-	pgd_t *pgd = pgd_base;
 	int flush = 0;
-	unsigned long addr = 0;
-	unsigned long pgd_next;
+	unsigned hole_low, hole_high;
+	unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
+	unsigned pgdidx, pudidx, pmdidx;
 
-	BUG_ON(limit > FIXADDR_TOP);
+	/* The limit is the last byte to be touched */
+	limit--;
+	BUG_ON(limit >= FIXADDR_TOP);
 
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return 0;
 
-	for (; addr != FIXADDR_TOP; pgd++, addr = pgd_next) {
+	/*
+	 * 64-bit has a great big hole in the middle of the address
+	 * space, which contains the Xen mappings.  On 32-bit these
+	 * will end up making a zero-sized hole and so is a no-op.
+	 */
+	hole_low = pgd_index(USER_LIMIT);
+	hole_high = pgd_index(PAGE_OFFSET);
+
+	pgdidx_limit = pgd_index(limit);
+#if PTRS_PER_PUD > 1
+	pudidx_limit = pud_index(limit);
+#else
+	pudidx_limit = 0;
+#endif
+#if PTRS_PER_PMD > 1
+	pmdidx_limit = pmd_index(limit);
+#else
+	pmdidx_limit = 0;
+#endif
+
+	flush |= (*func)(virt_to_page(pgd), PT_PGD);
+
+	for (pgdidx = 0; pgdidx <= pgdidx_limit; pgdidx++) {
 		pud_t *pud;
-		unsigned long pud_limit, pud_next;
 
-		pgd_next = pud_limit = pgd_addr_end(addr, FIXADDR_TOP);
+		if (pgdidx >= hole_low && pgdidx < hole_high)
+			continue;
 
-		if (!pgd_val(*pgd))
+		if (!pgd_val(pgd[pgdidx]))
 			continue;
 
-		pud = pud_offset(pgd, 0);
+		pud = pud_offset(&pgd[pgdidx], 0);
 
 		if (PTRS_PER_PUD > 1) /* not folded */
 			flush |= (*func)(virt_to_page(pud), PT_PUD);
 
-		for (; addr != pud_limit; pud++, addr = pud_next) {
+		for (pudidx = 0; pudidx < PTRS_PER_PUD; pudidx++) {
 			pmd_t *pmd;
-			unsigned long pmd_limit;
 
-			pud_next = pud_addr_end(addr, pud_limit);
-
-			if (pud_next < limit)
-				pmd_limit = pud_next;
-			else
-				pmd_limit = limit;
+			if (pgdidx == pgdidx_limit &&
+			    pudidx > pudidx_limit)
+				goto out;
 
-			if (pud_none(*pud))
+			if (pud_none(pud[pudidx]))
 				continue;
 
-			pmd = pmd_offset(pud, 0);
+			pmd = pmd_offset(&pud[pudidx], 0);
 
 			if (PTRS_PER_PMD > 1) /* not folded */
 				flush |= (*func)(virt_to_page(pmd), PT_PMD);
 
-			for (; addr != pmd_limit; pmd++) {
-				addr += (PAGE_SIZE * PTRS_PER_PTE);
-				if ((pmd_limit-1) < (addr-1)) {
-					addr = pmd_limit;
-					break;
-				}
+			for (pmdidx = 0; pmdidx < PTRS_PER_PMD; pmdidx++) {
+				struct page *pte;
+
+				if (pgdidx == pgdidx_limit &&
+				    pudidx == pudidx_limit &&
+				    pmdidx > pmdidx_limit)
+					goto out;
 
-				if (pmd_none(*pmd))
+				if (pmd_none(pmd[pmdidx]))
 					continue;
 
-				flush |= (*func)(pmd_page(*pmd), PT_PTE);
+				pte = pmd_page(pmd[pmdidx]);
+				flush |= (*func)(pte, PT_PTE);
 			}
 		}
 	}
-
-	flush |= (*func)(virt_to_page(pgd_base), PT_PGD);
+out:
 
 	return flush;
 }
@@ -622,14 +719,31 @@ void xen_pgd_pin(pgd_t *pgd)
 {
 	xen_mc_batch();
 
-	if (pgd_walk(pgd, pin_page, TASK_SIZE)) {
+	if (pgd_walk(pgd, pin_page, USER_LIMIT)) {
 		/* re-enable interrupts for kmap_flush_unused */
 		xen_mc_issue(0);
 		kmap_flush_unused();
 		xen_mc_batch();
 	}
 
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+		xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(pgd)));
+
+		if (user_pgd) {
+			pin_page(virt_to_page(user_pgd), PT_PGD);
+			xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(user_pgd)));
+		}
+	}
+#else /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_PAE
+	/* Need to make sure unshared kernel PMD is pinnable */
+	pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+#endif
 	xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
+#endif /* CONFIG_X86_64 */
 	xen_mc_issue(0);
 }
 
@@ -656,9 +770,11 @@ void xen_mm_pin_all(void)
 	spin_unlock_irqrestore(&pgd_lock, flags);
 }
 
-/* The init_mm pagetable is really pinned as soon as its created, but
-   that's before we have page structures to store the bits.  So do all
-   the book-keeping now. */
+/*
+ * The init_mm pagetable is really pinned as soon as its created, but
+ * that's before we have page structures to store the bits.  So do all
+ * the book-keeping now.
+ */
 static __init int mark_pinned(struct page *page, enum pt_level level)
 {
 	SetPagePinned(page);
@@ -708,7 +824,23 @@ static void xen_pgd_unpin(pgd_t *pgd)
 
 	xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-	pgd_walk(pgd, unpin_page, TASK_SIZE);
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+		if (user_pgd) {
+			xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(user_pgd)));
+			unpin_page(virt_to_page(user_pgd), PT_PGD);
+		}
+	}
+#endif
+
+#ifdef CONFIG_X86_PAE
+	/* Need to make sure unshared kernel PMD is unpinned */
+	pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+#endif
+
+	pgd_walk(pgd, unpin_page, USER_LIMIT);
 
 	xen_mc_issue(0);
 }
@@ -727,7 +859,6 @@ void xen_mm_unpin_all(void)
 	list_for_each_entry(page, &pgd_list, lru) {
 		if (PageSavePinned(page)) {
 			BUG_ON(!PagePinned(page));
-			printk("unpinning pinned %p\n", page_address(page));
 			xen_pgd_unpin((pgd_t *)page_address(page));
 			ClearPageSavePinned(page);
 		}
@@ -757,8 +888,15 @@ void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
 static void drop_other_mm_ref(void *info)
 {
 	struct mm_struct *mm = info;
+	struct mm_struct *active_mm;
+
+#ifdef CONFIG_X86_64
+	active_mm = read_pda(active_mm);
+#else
+	active_mm = __get_cpu_var(cpu_tlbstate).active_mm;
+#endif
 
-	if (__get_cpu_var(cpu_tlbstate).active_mm == mm)
+	if (active_mm == mm)
 		leave_mm(smp_processor_id());
 
 	/* If this cpu still has a stale cr3 reference, then make sure
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 297bf9f5b8b..0f59bd03f9e 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -10,18 +10,6 @@ enum pt_level {
 	PT_PTE
 };
 
-/*
- * Page-directory addresses above 4GB do not fit into architectural %cr3.
- * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
- * must use the following accessor macros to pack/unpack valid MFNs.
- *
- * Note that Xen is using the fact that the pagetable base is always
- * page-aligned, and putting the 12 MSB of the address into the 12 LSB
- * of cr3.
- */
-#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
-#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
-
 
 void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
 
@@ -44,13 +32,26 @@ pgd_t xen_make_pgd(pgdval_t);
 void xen_set_pte(pte_t *ptep, pte_t pteval);
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
 		    pte_t *ptep, pte_t pteval);
+
+#ifdef CONFIG_X86_PAE
 void xen_set_pte_atomic(pte_t *ptep, pte_t pte);
+void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+void xen_pmd_clear(pmd_t *pmdp);
+#endif	/* CONFIG_X86_PAE */
+
 void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval);
 void xen_set_pud(pud_t *ptr, pud_t val);
 void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval);
 void xen_set_pud_hyper(pud_t *ptr, pud_t val);
-void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-void xen_pmd_clear(pmd_t *pmdp);
+
+#if PAGETABLE_LEVELS == 4
+pudval_t xen_pud_val(pud_t pud);
+pud_t xen_make_pud(pudval_t pudval);
+void xen_set_pgd(pgd_t *pgdp, pgd_t pgd);
+void xen_set_pgd_hyper(pgd_t *pgdp, pgd_t pgd);
+#endif
+
+pgd_t *xen_get_user_pgd(pgd_t *pgd);
 
 pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
 void  xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 3c63c4da7ed..9efd1c6c977 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -76,6 +76,7 @@ void xen_mc_flush(void)
 		if (ret) {
 			printk(KERN_ERR "%d multicall(s) failed: cpu %d\n",
 			       ret, smp_processor_id());
+			dump_stack();
 			for (i = 0; i < b->mcidx; i++) {
 				printk("  call %2d/%d: op=%lu arg=[%lx] result=%ld\n",
 				       i+1, b->mcidx,
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index e0a39595bde..d6790108388 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -42,7 +42,7 @@ char * __init xen_memory_setup(void)
 
 	e820.nr_map = 0;
 
-	e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM);
+	e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM);
 
 	/*
 	 * Even though this is normal, usable memory under Xen, reserve
@@ -83,30 +83,72 @@ static void xen_idle(void)
 
 /*
  * Set the bit indicating "nosegneg" library variants should be used.
+ * We only need to bother in pure 32-bit mode; compat 32-bit processes
+ * can have un-truncated segments, so wrapping around is allowed.
  */
 static void __init fiddle_vdso(void)
 {
-	extern const char vdso32_default_start;
-	u32 *mask = VDSO32_SYMBOL(&vdso32_default_start, NOTE_MASK);
+#ifdef CONFIG_X86_32
+	u32 *mask;
+	mask = VDSO32_SYMBOL(&vdso32_int80_start, NOTE_MASK);
 	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+	mask = VDSO32_SYMBOL(&vdso32_sysenter_start, NOTE_MASK);
+	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+#endif
 }
 
-void xen_enable_sysenter(void)
+static __cpuinit int register_callback(unsigned type, const void *func)
 {
-	int cpu = smp_processor_id();
-	extern void xen_sysenter_target(void);
-	/* Mask events on entry, even though they get enabled immediately */
-	static struct callback_register sysenter = {
-		.type = CALLBACKTYPE_sysenter,
-		.address = { __KERNEL_CS, (unsigned long)xen_sysenter_target },
+	struct callback_register callback = {
+		.type = type,
+		.address = XEN_CALLBACK(__KERNEL_CS, func),
 		.flags = CALLBACKF_mask_events,
 	};
 
-	if (!boot_cpu_has(X86_FEATURE_SEP) ||
-	    HYPERVISOR_callback_op(CALLBACKOP_register, &sysenter) != 0) {
-		clear_cpu_cap(&cpu_data(cpu), X86_FEATURE_SEP);
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
+	return HYPERVISOR_callback_op(CALLBACKOP_register, &callback);
+}
+
+void __cpuinit xen_enable_sysenter(void)
+{
+	extern void xen_sysenter_target(void);
+	int ret;
+	unsigned sysenter_feature;
+
+#ifdef CONFIG_X86_32
+	sysenter_feature = X86_FEATURE_SEP;
+#else
+	sysenter_feature = X86_FEATURE_SYSENTER32;
+#endif
+
+	if (!boot_cpu_has(sysenter_feature))
+		return;
+
+	ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
+	if(ret != 0)
+		setup_clear_cpu_cap(sysenter_feature);
+}
+
+void __cpuinit xen_enable_syscall(void)
+{
+#ifdef CONFIG_X86_64
+	int ret;
+	extern void xen_syscall_target(void);
+	extern void xen_syscall32_target(void);
+
+	ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
+		/* Pretty fatal; 64-bit userspace has no other
+		   mechanism for syscalls. */
 	}
+
+	if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
+		ret = register_callback(CALLBACKTYPE_syscall32,
+					xen_syscall32_target);
+		if (ret != 0)
+			setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
+	}
+#endif /* CONFIG_X86_64 */
 }
 
 void __init xen_arch_setup(void)
@@ -120,10 +162,12 @@ void __init xen_arch_setup(void)
 	if (!xen_feature(XENFEAT_auto_translated_physmap))
 		HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_pae_extended_cr3);
 
-	HYPERVISOR_set_callbacks(__KERNEL_CS, (unsigned long)xen_hypervisor_callback,
-				 __KERNEL_CS, (unsigned long)xen_failsafe_callback);
+	if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) ||
+	    register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
+		BUG();
 
 	xen_enable_sysenter();
+	xen_enable_syscall();
 
 	set_iopl.iopl = 1;
 	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
@@ -143,11 +187,6 @@ void __init xen_arch_setup(void)
 
 	pm_idle = xen_idle;
 
-#ifdef CONFIG_SMP
-	/* fill cpus_possible with all available cpus */
-	xen_fill_possible_map();
-#endif
-
 	paravirt_disable_iospace();
 
 	fiddle_vdso();
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 233156f39b7..d8faf79a0a1 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -15,6 +15,7 @@
  * This does not handle HOTPLUG_CPU yet.
  */
 #include <linux/sched.h>
+#include <linux/kernel_stat.h>
 #include <linux/err.h>
 #include <linux/smp.h>
 
@@ -35,6 +36,8 @@
 #include "xen-ops.h"
 #include "mmu.h"
 
+static void __cpuinit xen_init_lock_cpu(int cpu);
+
 cpumask_t xen_cpu_initialized_map;
 
 static DEFINE_PER_CPU(int, resched_irq);
@@ -66,13 +69,22 @@ static __cpuinit void cpu_bringup_and_idle(void)
 	int cpu = smp_processor_id();
 
 	cpu_init();
+	preempt_disable();
+
 	xen_enable_sysenter();
+	xen_enable_syscall();
 
-	preempt_disable();
-	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+	cpu = smp_processor_id();
+	smp_store_cpu_info(cpu);
+	cpu_data(cpu).x86_max_cores = 1;
+	set_cpu_sibling_map(cpu);
 
 	xen_setup_cpu_clockevents();
 
+	cpu_set(cpu, cpu_online_map);
+	x86_write_percpu(cpu_state, CPU_ONLINE);
+	wmb();
+
 	/* We can take interrupts now: we're officially "up". */
 	local_irq_enable();
 
@@ -141,56 +153,39 @@ static int xen_smp_intr_init(unsigned int cpu)
 	return rc;
 }
 
-void __init xen_fill_possible_map(void)
+static void __init xen_fill_possible_map(void)
 {
 	int i, rc;
 
 	for (i = 0; i < NR_CPUS; i++) {
 		rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
-		if (rc >= 0)
+		if (rc >= 0) {
+			num_processors++;
 			cpu_set(i, cpu_possible_map);
+		}
 	}
 }
 
-void __init xen_smp_prepare_boot_cpu(void)
+static void __init xen_smp_prepare_boot_cpu(void)
 {
-	int cpu;
-
 	BUG_ON(smp_processor_id() != 0);
 	native_smp_prepare_boot_cpu();
 
 	/* We've switched to the "real" per-cpu gdt, so make sure the
 	   old memory can be recycled */
-	make_lowmem_page_readwrite(&per_cpu__gdt_page);
-
-	for_each_possible_cpu(cpu) {
-		cpus_clear(per_cpu(cpu_sibling_map, cpu));
-		/*
-		 * cpu_core_map lives in a per cpu area that is cleared
-		 * when the per cpu array is allocated.
-		 *
-		 * cpus_clear(per_cpu(cpu_core_map, cpu));
-		 */
-	}
+	make_lowmem_page_readwrite(&per_cpu_var(gdt_page));
 
 	xen_setup_vcpu_info_placement();
 }
 
-void __init xen_smp_prepare_cpus(unsigned int max_cpus)
+static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned cpu;
 
-	for_each_possible_cpu(cpu) {
-		cpus_clear(per_cpu(cpu_sibling_map, cpu));
-		/*
-		 * cpu_core_ map will be zeroed when the per
-		 * cpu area is allocated.
-		 *
-		 * cpus_clear(per_cpu(cpu_core_map, cpu));
-		 */
-	}
+	xen_init_lock_cpu(0);
 
 	smp_store_cpu_info(0);
+	cpu_data(0).x86_max_cores = 1;
 	set_cpu_sibling_map(0);
 
 	if (xen_smp_intr_init(0))
@@ -225,7 +220,7 @@ static __cpuinit int
 cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 {
 	struct vcpu_guest_context *ctxt;
-	struct gdt_page *gdt = &per_cpu(gdt_page, cpu);
+	struct desc_struct *gdt;
 
 	if (cpu_test_and_set(cpu, xen_cpu_initialized_map))
 		return 0;
@@ -234,12 +229,15 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	if (ctxt == NULL)
 		return -ENOMEM;
 
+	gdt = get_cpu_gdt_table(cpu);
+
 	ctxt->flags = VGCF_IN_KERNEL;
 	ctxt->user_regs.ds = __USER_DS;
 	ctxt->user_regs.es = __USER_DS;
-	ctxt->user_regs.fs = __KERNEL_PERCPU;
-	ctxt->user_regs.gs = 0;
 	ctxt->user_regs.ss = __KERNEL_DS;
+#ifdef CONFIG_X86_32
+	ctxt->user_regs.fs = __KERNEL_PERCPU;
+#endif
 	ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
 	ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
 
@@ -249,11 +247,11 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 
 	ctxt->ldt_ents = 0;
 
-	BUG_ON((unsigned long)gdt->gdt & ~PAGE_MASK);
-	make_lowmem_page_readonly(gdt->gdt);
+	BUG_ON((unsigned long)gdt & ~PAGE_MASK);
+	make_lowmem_page_readonly(gdt);
 
-	ctxt->gdt_frames[0] = virt_to_mfn(gdt->gdt);
-	ctxt->gdt_ents      = ARRAY_SIZE(gdt->gdt);
+	ctxt->gdt_frames[0] = virt_to_mfn(gdt);
+	ctxt->gdt_ents      = GDT_ENTRIES;
 
 	ctxt->user_regs.cs = __KERNEL_CS;
 	ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs);
@@ -261,9 +259,11 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	ctxt->kernel_ss = __KERNEL_DS;
 	ctxt->kernel_sp = idle->thread.sp0;
 
+#ifdef CONFIG_X86_32
 	ctxt->event_callback_cs     = __KERNEL_CS;
-	ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
 	ctxt->failsafe_callback_cs  = __KERNEL_CS;
+#endif
+	ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
 	ctxt->failsafe_callback_eip = (unsigned long)xen_failsafe_callback;
 
 	per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
@@ -276,7 +276,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-int __cpuinit xen_cpu_up(unsigned int cpu)
+static int __cpuinit xen_cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle = idle_task(cpu);
 	int rc;
@@ -287,10 +287,28 @@ int __cpuinit xen_cpu_up(unsigned int cpu)
 		return rc;
 #endif
 
+#ifdef CONFIG_X86_64
+	/* Allocate node local memory for AP pdas */
+	WARN_ON(cpu == 0);
+	if (cpu > 0) {
+		rc = get_local_pda(cpu);
+		if (rc)
+			return rc;
+	}
+#endif
+
+#ifdef CONFIG_X86_32
 	init_gdt(cpu);
 	per_cpu(current_task, cpu) = idle;
 	irq_ctx_init(cpu);
+#else
+	cpu_pda(cpu)->pcurrent = idle;
+	clear_tsk_thread_flag(idle, TIF_FORK);
+#endif
 	xen_setup_timer(cpu);
+	xen_init_lock_cpu(cpu);
+
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
 	/* make sure interrupts start blocked */
 	per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;
@@ -306,20 +324,18 @@ int __cpuinit xen_cpu_up(unsigned int cpu)
 	if (rc)
 		return rc;
 
-	smp_store_cpu_info(cpu);
-	set_cpu_sibling_map(cpu);
-	/* This must be done before setting cpu_online_map */
-	wmb();
-
-	cpu_set(cpu, cpu_online_map);
-
 	rc = HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL);
 	BUG_ON(rc);
 
+	while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
+		HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+		barrier();
+	}
+
 	return 0;
 }
 
-void xen_smp_cpus_done(unsigned int max_cpus)
+static void xen_smp_cpus_done(unsigned int max_cpus)
 {
 }
 
@@ -335,12 +351,12 @@ static void stop_self(void *v)
 	BUG();
 }
 
-void xen_smp_send_stop(void)
+static void xen_smp_send_stop(void)
 {
 	smp_call_function(stop_self, NULL, 0);
 }
 
-void xen_smp_send_reschedule(int cpu)
+static void xen_smp_send_reschedule(int cpu)
 {
 	xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR);
 }
@@ -351,18 +367,18 @@ static void xen_send_IPI_mask(cpumask_t mask, enum ipi_vector vector)
 
 	cpus_and(mask, mask, cpu_online_map);
 
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		xen_send_IPI_one(cpu, vector);
 }
 
-void xen_smp_send_call_function_ipi(cpumask_t mask)
+static void xen_smp_send_call_function_ipi(cpumask_t mask)
 {
 	int cpu;
 
 	xen_send_IPI_mask(mask, XEN_CALL_FUNCTION_VECTOR);
 
 	/* Make sure other vcpus get a chance to run if they need to. */
-	for_each_cpu_mask(cpu, mask) {
+	for_each_cpu_mask_nr(cpu, mask) {
 		if (xen_vcpu_stolen(cpu)) {
 			HYPERVISOR_sched_op(SCHEDOP_yield, 0);
 			break;
@@ -370,7 +386,7 @@ void xen_smp_send_call_function_ipi(cpumask_t mask)
 	}
 }
 
-void xen_smp_send_call_function_single_ipi(int cpu)
+static void xen_smp_send_call_function_single_ipi(int cpu)
 {
 	xen_send_IPI_mask(cpumask_of_cpu(cpu), XEN_CALL_FUNCTION_SINGLE_VECTOR);
 }
@@ -379,7 +395,11 @@ static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id)
 {
 	irq_enter();
 	generic_smp_call_function_interrupt();
+#ifdef CONFIG_X86_32
 	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
 	irq_exit();
 
 	return IRQ_HANDLED;
@@ -389,8 +409,196 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id)
 {
 	irq_enter();
 	generic_smp_call_function_single_interrupt();
+#ifdef CONFIG_X86_32
 	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
 	irq_exit();
 
 	return IRQ_HANDLED;
 }
+
+struct xen_spinlock {
+	unsigned char lock;		/* 0 -> free; 1 -> locked */
+	unsigned short spinners;	/* count of waiting cpus */
+};
+
+static int xen_spin_is_locked(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+	return xl->lock != 0;
+}
+
+static int xen_spin_is_contended(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+	/* Not strictly true; this is only the count of contended
+	   lock-takers entering the slow path. */
+	return xl->spinners != 0;
+}
+
+static int xen_spin_trylock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	u8 old = 1;
+
+	asm("xchgb %b0,%1"
+	    : "+q" (old), "+m" (xl->lock) : : "memory");
+
+	return old == 0;
+}
+
+static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
+static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
+
+static inline void spinning_lock(struct xen_spinlock *xl)
+{
+	__get_cpu_var(lock_spinners) = xl;
+	wmb();			/* set lock of interest before count */
+	asm(LOCK_PREFIX " incw %0"
+	    : "+m" (xl->spinners) : : "memory");
+}
+
+static inline void unspinning_lock(struct xen_spinlock *xl)
+{
+	asm(LOCK_PREFIX " decw %0"
+	    : "+m" (xl->spinners) : : "memory");
+	wmb();			/* decrement count before clearing lock */
+	__get_cpu_var(lock_spinners) = NULL;
+}
+
+static noinline int xen_spin_lock_slow(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	int irq = __get_cpu_var(lock_kicker_irq);
+	int ret;
+
+	/* If kicker interrupts not initialized yet, just spin */
+	if (irq == -1)
+		return 0;
+
+	/* announce we're spinning */
+	spinning_lock(xl);
+
+	/* clear pending */
+	xen_clear_irq_pending(irq);
+
+	/* check again make sure it didn't become free while
+	   we weren't looking  */
+	ret = xen_spin_trylock(lock);
+	if (ret)
+		goto out;
+
+	/* block until irq becomes pending */
+	xen_poll_irq(irq);
+	kstat_this_cpu.irqs[irq]++;
+
+out:
+	unspinning_lock(xl);
+	return ret;
+}
+
+static void xen_spin_lock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	int timeout;
+	u8 oldval;
+
+	do {
+		timeout = 1 << 10;
+
+		asm("1: xchgb %1,%0\n"
+		    "   testb %1,%1\n"
+		    "   jz 3f\n"
+		    "2: rep;nop\n"
+		    "   cmpb $0,%0\n"
+		    "   je 1b\n"
+		    "   dec %2\n"
+		    "   jnz 2b\n"
+		    "3:\n"
+		    : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
+		    : "1" (1)
+		    : "memory");
+
+	} while (unlikely(oldval != 0 && !xen_spin_lock_slow(lock)));
+}
+
+static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		/* XXX should mix up next cpu selection */
+		if (per_cpu(lock_spinners, cpu) == xl) {
+			xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
+			break;
+		}
+	}
+}
+
+static void xen_spin_unlock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+	smp_wmb();		/* make sure no writes get moved after unlock */
+	xl->lock = 0;		/* release lock */
+
+	/* make sure unlock happens before kick */
+	barrier();
+
+	if (unlikely(xl->spinners))
+		xen_spin_unlock_slow(xl);
+}
+
+static __cpuinit void xen_init_lock_cpu(int cpu)
+{
+	int irq;
+	const char *name;
+
+	name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+	irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
+				     cpu,
+				     xen_reschedule_interrupt,
+				     IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				     name,
+				     NULL);
+
+	if (irq >= 0) {
+		disable_irq(irq); /* make sure it's never delivered */
+		per_cpu(lock_kicker_irq, cpu) = irq;
+	}
+
+	printk("cpu %d spinlock event irq %d\n", cpu, irq);
+}
+
+static void __init xen_init_spinlocks(void)
+{
+	pv_lock_ops.spin_is_locked = xen_spin_is_locked;
+	pv_lock_ops.spin_is_contended = xen_spin_is_contended;
+	pv_lock_ops.spin_lock = xen_spin_lock;
+	pv_lock_ops.spin_trylock = xen_spin_trylock;
+	pv_lock_ops.spin_unlock = xen_spin_unlock;
+}
+
+static const struct smp_ops xen_smp_ops __initdata = {
+	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
+	.smp_prepare_cpus = xen_smp_prepare_cpus,
+	.cpu_up = xen_cpu_up,
+	.smp_cpus_done = xen_smp_cpus_done,
+
+	.smp_send_stop = xen_smp_send_stop,
+	.smp_send_reschedule = xen_smp_send_reschedule,
+
+	.send_call_func_ipi = xen_smp_send_call_function_ipi,
+	.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi,
+};
+
+void __init xen_smp_init(void)
+{
+	smp_ops = xen_smp_ops;
+	xen_fill_possible_map();
+	xen_init_spinlocks();
+}
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 251669a932d..2a234db5949 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -38,8 +38,11 @@ void xen_post_suspend(int suspend_cancelled)
 		xen_cpu_initialized_map = cpu_online_map;
 #endif
 		xen_vcpu_restore();
-		xen_timer_resume();
 	}
 
 }
 
+void xen_arch_resume(void)
+{
+	/* nothing */
+}
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm_32.S
index 2497a30f41d..2497a30f41d 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm_32.S
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
new file mode 100644
index 00000000000..7f58304fafb
--- /dev/null
+++ b/arch/x86/xen/xen-asm_64.S
@@ -0,0 +1,271 @@
+/*
+	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
+	The inline versions are the same as the direct-use versions, with the
+	pre- and post-amble chopped off.
+
+	This code is encoded for size rather than absolute efficiency,
+	with a view to being able to inline as much as possible.
+
+	We only bother with direct forms (ie, vcpu in pda) of the operations
+	here; the indirect forms are better handled in C, since they're
+	generally too large to inline anyway.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/processor-flags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+
+#include <xen/interface/xen.h>
+
+#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
+#define ENDPATCH(x)	.globl x##_end; x##_end=.
+
+/* Pseudo-flag used for virtual NMI, which we don't implement yet */
+#define XEN_EFLAGS_NMI	0x80000000
+
+#if 0
+#include <asm/percpu.h>
+
+/*
+	Enable events.  This clears the event mask and tests the pending
+	event status with one and operation.  If there are pending
+	events, then enter the hypervisor to get them handled.
+ */
+ENTRY(xen_irq_enable_direct)
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+	jz 1f
+
+2:	call check_events
+1:
+ENDPATCH(xen_irq_enable_direct)
+	ret
+	ENDPROC(xen_irq_enable_direct)
+	RELOC(xen_irq_enable_direct, 2b+1)
+
+/*
+	Disabling events is simply a matter of making the event mask
+	non-zero.
+ */
+ENTRY(xen_irq_disable_direct)
+	movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+ENDPATCH(xen_irq_disable_direct)
+	ret
+	ENDPROC(xen_irq_disable_direct)
+	RELOC(xen_irq_disable_direct, 0)
+
+/*
+	(xen_)save_fl is used to get the current interrupt enable status.
+	Callers expect the status to be in X86_EFLAGS_IF, and other bits
+	may be set in the return value.  We take advantage of this by
+	making sure that X86_EFLAGS_IF has the right value (and other bits
+	in that byte are 0), but other bits in the return value are
+	undefined.  We need to toggle the state of the bit, because
+	Xen and x86 use opposite senses (mask vs enable).
+ */
+ENTRY(xen_save_fl_direct)
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	setz %ah
+	addb %ah,%ah
+ENDPATCH(xen_save_fl_direct)
+	ret
+	ENDPROC(xen_save_fl_direct)
+	RELOC(xen_save_fl_direct, 0)
+
+/*
+	In principle the caller should be passing us a value return
+	from xen_save_fl_direct, but for robustness sake we test only
+	the X86_EFLAGS_IF flag rather than the whole byte. After
+	setting the interrupt mask state, it checks for unmasked
+	pending events and enters the hypervisor to get them delivered
+	if so.
+ */
+ENTRY(xen_restore_fl_direct)
+	testb $X86_EFLAGS_IF>>8, %ah
+	setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* check for unmasked and pending */
+	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+	jz 1f
+2:	call check_events
+1:
+ENDPATCH(xen_restore_fl_direct)
+	ret
+	ENDPROC(xen_restore_fl_direct)
+	RELOC(xen_restore_fl_direct, 2b+1)
+
+
+/*
+	Force an event check by making a hypercall,
+	but preserve regs before making the call.
+ */
+check_events:
+	push %rax
+	push %rcx
+	push %rdx
+	push %rsi
+	push %rdi
+	push %r8
+	push %r9
+	push %r10
+	push %r11
+	call force_evtchn_callback
+	pop %r11
+	pop %r10
+	pop %r9
+	pop %r8
+	pop %rdi
+	pop %rsi
+	pop %rdx
+	pop %rcx
+	pop %rax
+	ret
+#endif
+
+ENTRY(xen_adjust_exception_frame)
+	mov 8+0(%rsp),%rcx
+	mov 8+8(%rsp),%r11
+	ret $16
+
+hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
+/*
+	Xen64 iret frame:
+
+	ss
+	rsp
+	rflags
+	cs
+	rip		<-- standard iret frame
+
+	flags
+
+	rcx		}
+	r11		}<-- pushed by hypercall page
+rsp ->	rax		}
+ */
+ENTRY(xen_iret)
+	pushq $0
+1:	jmp hypercall_iret
+ENDPATCH(xen_iret)
+RELOC(xen_iret, 1b+1)
+
+/*
+	sysexit is not used for 64-bit processes, so it's
+	only ever used to return to 32-bit compat userspace.
+ */
+ENTRY(xen_sysexit)
+	pushq $__USER32_DS
+	pushq %rcx
+	pushq $X86_EFLAGS_IF
+	pushq $__USER32_CS
+	pushq %rdx
+
+	pushq $0
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysexit)
+RELOC(xen_sysexit, 1b+1)
+
+ENTRY(xen_sysret64)
+	/* We're already on the usermode stack at this point, but still
+	   with the kernel gs, so we can easily switch back */
+	movq %rsp, %gs:pda_oldrsp
+	movq %gs:pda_kernelstack,%rsp
+
+	pushq $__USER_DS
+	pushq %gs:pda_oldrsp
+	pushq %r11
+	pushq $__USER_CS
+	pushq %rcx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysret64)
+RELOC(xen_sysret64, 1b+1)
+
+ENTRY(xen_sysret32)
+	/* We're already on the usermode stack at this point, but still
+	   with the kernel gs, so we can easily switch back */
+	movq %rsp, %gs:pda_oldrsp
+	movq %gs:pda_kernelstack, %rsp
+
+	pushq $__USER32_DS
+	pushq %gs:pda_oldrsp
+	pushq %r11
+	pushq $__USER32_CS
+	pushq %rcx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysret32)
+RELOC(xen_sysret32, 1b+1)
+
+/*
+	Xen handles syscall callbacks much like ordinary exceptions,
+	which means we have:
+	 - kernel gs
+	 - kernel rsp
+	 - an iret-like stack frame on the stack (including rcx and r11):
+		ss
+		rsp
+		rflags
+		cs
+		rip
+		r11
+	rsp->	rcx
+
+	In all the entrypoints, we undo all that to make it look
+	like a CPU-generated syscall/sysenter and jump to the normal
+	entrypoint.
+ */
+
+.macro undo_xen_syscall
+	mov 0*8(%rsp),%rcx
+	mov 1*8(%rsp),%r11
+	mov 5*8(%rsp),%rsp
+.endm
+
+/* Normal 64-bit system call target */
+ENTRY(xen_syscall_target)
+	undo_xen_syscall
+	jmp system_call_after_swapgs
+ENDPROC(xen_syscall_target)
+
+#ifdef CONFIG_IA32_EMULATION
+
+/* 32-bit compat syscall target */
+ENTRY(xen_syscall32_target)
+	undo_xen_syscall
+	jmp ia32_cstar_target
+ENDPROC(xen_syscall32_target)
+
+/* 32-bit compat sysenter target */
+ENTRY(xen_sysenter_target)
+	undo_xen_syscall
+	jmp ia32_sysenter_target
+ENDPROC(xen_sysenter_target)
+
+#else /* !CONFIG_IA32_EMULATION */
+
+ENTRY(xen_syscall32_target)
+ENTRY(xen_sysenter_target)
+	lea 16(%rsp), %rsp	/* strip %rcx,%r11 */
+	mov $-ENOSYS, %rax
+	pushq $VGCF_in_syscall
+	jmp hypercall_iret
+ENDPROC(xen_syscall32_target)
+ENDPROC(xen_sysenter_target)
+
+#endif	/* CONFIG_IA32_EMULATION */
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 7c0cf6320a0..63d49a523ed 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -5,15 +5,24 @@
 
 #include <linux/elfnote.h>
 #include <linux/init.h>
+
 #include <asm/boot.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
 #include <xen/interface/elfnote.h>
 #include <asm/xen/interface.h>
 
 	__INIT
 ENTRY(startup_xen)
-	movl %esi,xen_start_info
 	cld
-	movl $(init_thread_union+THREAD_SIZE),%esp
+#ifdef CONFIG_X86_32
+	mov %esi,xen_start_info
+	mov $init_thread_union+THREAD_SIZE,%esp
+#else
+	mov %rsi,xen_start_info
+	mov $init_thread_union+THREAD_SIZE,%rsp
+#endif
 	jmp xen_start_kernel
 
 	__FINIT
@@ -21,21 +30,26 @@ ENTRY(startup_xen)
 .pushsection .text
 	.align PAGE_SIZE_asm
 ENTRY(hypercall_page)
-	.skip 0x1000
+	.skip PAGE_SIZE_asm
 .popsection
 
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,  .asciz "2.6")
 	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,    .asciz "xen-3.0")
-	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      .long  __PAGE_OFFSET)
-	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          .long  startup_xen)
-	ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long  hypercall_page)
+#ifdef CONFIG_X86_32
+	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      _ASM_PTR __PAGE_OFFSET)
+#else
+	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      _ASM_PTR __START_KERNEL_map)
+#endif
+	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          _ASM_PTR startup_xen)
+	ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, _ASM_PTR hypercall_page)
 	ELFNOTE(Xen, XEN_ELFNOTE_FEATURES,       .asciz "!writable_page_tables|pae_pgdir_above_4gb")
 	ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE,       .asciz "yes")
 	ELFNOTE(Xen, XEN_ELFNOTE_LOADER,         .asciz "generic")
 	ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID,
 		.quad _PAGE_PRESENT; .quad _PAGE_PRESENT)
 	ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1)
-	ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW,   .long __HYPERVISOR_VIRT_START)
+	ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW,   _ASM_PTR __HYPERVISOR_VIRT_START)
+	ELFNOTE(Xen, XEN_ELFNOTE_PADDR_OFFSET,   _ASM_PTR 0)
 
 #endif /*CONFIG_XEN */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 6f4b1045c1c..dd3c23152a2 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -26,6 +26,7 @@ char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
 void __init xen_init_IRQ(void);
 void xen_enable_sysenter(void);
+void xen_enable_syscall(void);
 void xen_vcpu_restore(void);
 
 void __init xen_build_dynamic_phys_to_machine(void);
@@ -37,7 +38,6 @@ void __init xen_time_init(void);
 unsigned long xen_get_wallclock(void);
 int xen_set_wallclock(unsigned long time);
 unsigned long long xen_sched_clock(void);
-void xen_timer_resume(void);
 
 irqreturn_t xen_debug_interrupt(int irq, void *dev_id);
 
@@ -45,20 +45,15 @@ bool xen_vcpu_stolen(int vcpu);
 
 void xen_mark_init_mm_pinned(void);
 
-void __init xen_fill_possible_map(void);
-
 void __init xen_setup_vcpu_info_placement(void);
-void xen_smp_prepare_boot_cpu(void);
-void xen_smp_prepare_cpus(unsigned int max_cpus);
-int xen_cpu_up(unsigned int cpu);
-void xen_smp_cpus_done(unsigned int max_cpus);
 
-void xen_smp_send_stop(void);
-void xen_smp_send_reschedule(int cpu);
-void xen_smp_send_call_function_ipi(cpumask_t mask);
-void xen_smp_send_call_function_single_ipi(int cpu);
+#ifdef CONFIG_SMP
+void xen_smp_init(void);
 
 extern cpumask_t xen_cpu_initialized_map;
+#else
+static inline void xen_smp_init(void) {}
+#endif
 
 
 /* Declare an asm function, along with symbols needed to make it
@@ -73,7 +68,11 @@ DECL_ASM(void, xen_irq_disable_direct, void);
 DECL_ASM(unsigned long, xen_save_fl_direct, void);
 DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 
+/* These are not functions, and cannot be called normally */
 void xen_iret(void);
 void xen_sysexit(void);
+void xen_sysret32(void);
+void xen_sysret64(void);
+void xen_adjust_exception_frame(void);
 
 #endif /* XEN_OPS_H */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9fc8551a1cf..02e417d3d8e 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -194,8 +194,8 @@ config HOTPLUG
 	plugged into slots found on all modern laptop computers.  Another
 	example, used on modern desktops as well as laptops, is USB.
 
-	Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-	software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	Enable HOTPLUG and build a modular kernel.  Get agent software
+	(from <http://linux-hotplug.sourceforge.net/>) and install it.
 	Then your kernel will automatically call out to a user mode "policy
 	agent" (/sbin/hotplug) to load modules and set up software needed
 	to use devices as you hotplug them.
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 5e6d75c9f92..a00359e8f7a 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -16,6 +16,7 @@
 
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/screen_info.h>
 #include <linux/bootmem.h>
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index f3e16efcd47..ac15ecbdf91 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -49,7 +49,7 @@ asmlinkage long xtensa_pipe(int __user *userfds)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (!error) {
 		if (copy_to_user(userfds, fd, 2 * sizeof(int)))
 			error = -EFAULT;
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 6e52cdd6166..c9a7c5b74a0 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -18,7 +18,6 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <linux/in6.h>
-#include <linux/ide.h>
 
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 81d0560eaea..34163cfaaff 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -280,36 +280,9 @@ void free_initmem(void)
 	       (&__init_end - &__init_begin) >> 10);
 }
 
-void show_mem(void)
-{
-	int i, free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n",cached);
-	printk("%d free pages\n", free);
-}
-
 struct kmem_cache *pgtable_cache __read_mostly;
 
-static void pgd_ctor(struct kmem_cache *cache, void* addr)
+static void pgd_ctor(void* addr)
 {
 	pte_t* ptep = (pte_t*)addr;
 	int i;